Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4916 files changed, 615864 insertions, 0 deletions

diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
new file mode 100644
index 000000000000..2b41e47b7d80
--- /dev/null
+++ b/include/acpi/acconfig.h
@@ -0,0 +1,217 @@
+/******************************************************************************
+ *
+ * Name: acconfig.h - Global configuration constants
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ACCONFIG_H
+#define _ACCONFIG_H
+
+
+/******************************************************************************
+ *
+ * Configuration options
+ *
+ *****************************************************************************/
+
+/*
+ * ACPI_DEBUG_OUTPUT    - This switch enables all the debug facilities of the
+ *                        ACPI subsystem.  This includes the DEBUG_PRINT output
+ *                        statements.  When disabled, all DEBUG_PRINT
+ *                        statements are compiled out.
+ *
+ * ACPI_APPLICATION     - Use this switch if the subsystem is going to be run
+ *                        at the application level.
+ *
+ */
+
+/* Version string */
+
+#define ACPI_CA_VERSION                 0x20050309
+
+/*
+ * OS name, used for the _OS object.  The _OS object is essentially obsolete,
+ * but there is a large base of ASL/AML code in existing machines that check
+ * for the string below.  The use of this string usually guarantees that
+ * the ASL will execute down the most tested code path.  Also, there is some
+ * code that will not execute the _OSI method unless _OS matches the string
+ * below.  Therefore, change this string at your own risk.
+ */
+#define ACPI_OS_NAME                    "Microsoft Windows NT"
+
+/* Maximum objects in the various object caches */
+
+#define ACPI_MAX_STATE_CACHE_DEPTH      64          /* State objects */
+#define ACPI_MAX_PARSE_CACHE_DEPTH      96          /* Parse tree objects */
+#define ACPI_MAX_EXTPARSE_CACHE_DEPTH   64          /* Parse tree objects */
+#define ACPI_MAX_OBJECT_CACHE_DEPTH     64          /* Interpreter operand objects */
+#define ACPI_MAX_WALK_CACHE_DEPTH       4           /* Objects for parse tree walks */
+
+/*
+ * Should the subystem abort the loading of an ACPI table if the
+ * table checksum is incorrect?
+ */
+#define ACPI_CHECKSUM_ABORT             FALSE
+
+
+/******************************************************************************
+ *
+ * Subsystem Constants
+ *
+ *****************************************************************************/
+
+/* Version of ACPI supported */
+
+#define ACPI_CA_SUPPORT_LEVEL           3
+
+/* String size constants */
+
+#define ACPI_MAX_STRING_LENGTH          512
+#define ACPI_PATHNAME_MAX               256         /* A full namespace pathname */
+
+/* Maximum count for a semaphore object */
+
+#define ACPI_MAX_SEMAPHORE_COUNT        256
+
+/* Max reference count (for debug only) */
+
+#define ACPI_MAX_REFERENCE_COUNT        0x400
+
+/* Size of cached memory mapping for system memory operation region */
+
+#define ACPI_SYSMEM_REGION_WINDOW_SIZE  4096
+
+
+/******************************************************************************
+ *
+ * ACPI Specification constants (Do not change unless the specification changes)
+ *
+ *****************************************************************************/
+
+/* Number of distinct GPE register blocks and register width */
+
+#define ACPI_MAX_GPE_BLOCKS             2
+#define ACPI_GPE_REGISTER_WIDTH         8
+
+/*
+ * Method info (in WALK_STATE), containing local variables and argumetns
+ */
+#define ACPI_METHOD_NUM_LOCALS          8
+#define ACPI_METHOD_MAX_LOCAL           7
+
+#define ACPI_METHOD_NUM_ARGS            7
+#define ACPI_METHOD_MAX_ARG             6
+
+/* Maximum length of resulting string when converting from a buffer */
+
+#define ACPI_MAX_STRING_CONVERSION      200
+
+/* Length of _HID, _UID, and _CID values */
+
+#define ACPI_DEVICE_ID_LENGTH           0x09
+#define ACPI_MAX_CID_LENGTH             48
+
+/*
+ * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
+ */
+#define ACPI_OBJ_NUM_OPERANDS           8
+#define ACPI_OBJ_MAX_OPERAND            7
+
+/* Names within the namespace are 4 bytes long */
+
+#define ACPI_NAME_SIZE                  4
+#define ACPI_PATH_SEGMENT_LENGTH        5           /* 4 chars for name + 1 char for separator */
+#define ACPI_PATH_SEPARATOR             '.'
+
+/* Constants used in searching for the RSDP in low memory */
+
+#define ACPI_EBDA_PTR_LOCATION          0x0000040E     /* Physical Address */
+#define ACPI_EBDA_PTR_LENGTH            2
+#define ACPI_EBDA_WINDOW_SIZE           1024
+#define ACPI_HI_RSDP_WINDOW_BASE        0x000E0000     /* Physical Address */
+#define ACPI_HI_RSDP_WINDOW_SIZE        0x00020000
+#define ACPI_RSDP_SCAN_STEP             16
+
+/* Operation regions */
+
+#define ACPI_NUM_PREDEFINED_REGIONS     8
+#define ACPI_USER_REGION_BEGIN          0x80
+
+/* Maximum space_ids for Operation Regions */
+
+#define ACPI_MAX_ADDRESS_SPACE          255
+
+/* Array sizes.  Used for range checking also */
+
+#define ACPI_NUM_ACCESS_TYPES           6
+#define ACPI_NUM_UPDATE_RULES           3
+#define ACPI_NUM_LOCK_RULES             2
+#define ACPI_NUM_MATCH_OPS              6
+#define ACPI_NUM_OPCODES                256
+#define ACPI_NUM_FIELD_NAMES            2
+
+/* RSDP checksums */
+
+#define ACPI_RSDP_CHECKSUM_LENGTH       20
+#define ACPI_RSDP_XCHECKSUM_LENGTH      36
+
+/* SMBus bidirectional buffer size */
+
+#define ACPI_SMBUS_BUFFER_SIZE          34
+
+/* Number of strings associated with the _OSI reserved method */
+
+#define ACPI_NUM_OSI_STRINGS            10
+
+
+/******************************************************************************
+ *
+ * ACPI AML Debugger
+ *
+ *****************************************************************************/
+
+#define ACPI_DEBUGGER_MAX_ARGS          8  /* Must be max method args + 1 */
+
+#define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
+#define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
+
+
+#endif /* _ACCONFIG_H */
+
diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h
new file mode 100644
index 000000000000..223b2a506e49
--- /dev/null
+++ b/include/acpi/acdebug.h
@@ -0,0 +1,472 @@
+/******************************************************************************
+ *
+ * Name: acdebug.h - ACPI/AML debugger
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACDEBUG_H__
+#define __ACDEBUG_H__
+
+
+#define ACPI_DEBUG_BUFFER_SIZE  4196
+
+struct command_info
+{
+	char                            *name;          /* Command Name */
+	u8                              min_args;       /* Minimum arguments required */
+};
+
+
+struct argument_info
+{
+	char                            *name;          /* Argument Name */
+};
+
+
+#define PARAM_LIST(pl)                  pl
+
+#define DBTEST_OUTPUT_LEVEL(lvl)        if (acpi_gbl_db_opt_verbose)
+
+#define VERBOSE_PRINT(fp)               DBTEST_OUTPUT_LEVEL(lvl) {\
+			  acpi_os_printf PARAM_LIST(fp);}
+
+#define EX_NO_SINGLE_STEP               1
+#define EX_SINGLE_STEP                  2
+
+
+/* Prototypes */
+
+
+/*
+ * dbxface - external debugger interfaces
+ */
+
+acpi_status
+acpi_db_initialize (
+	void);
+
+void
+acpi_db_terminate (
+	void);
+
+acpi_status
+acpi_db_single_step (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u32                             op_type);
+
+acpi_status
+acpi_db_start_command (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+void
+acpi_db_method_end (
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * dbcmds - debug commands and output routines
+ */
+
+acpi_status
+acpi_db_disassemble_method (
+	char                            *name);
+
+void
+acpi_db_display_table_info (
+	char                            *table_arg);
+
+void
+acpi_db_unload_acpi_table (
+	char                            *table_arg,
+	char                            *instance_arg);
+
+void
+acpi_db_set_method_breakpoint (
+	char                            *location,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+void
+acpi_db_set_method_call_breakpoint (
+	union acpi_parse_object         *op);
+
+void
+acpi_db_disassemble_aml (
+	char                            *statements,
+	union acpi_parse_object         *op);
+
+void
+acpi_db_dump_namespace (
+	char                            *start_arg,
+	char                            *depth_arg);
+
+void
+acpi_db_dump_namespace_by_owner (
+	char                            *owner_arg,
+	char                            *depth_arg);
+
+void
+acpi_db_send_notify (
+	char                            *name,
+	u32                             value);
+
+void
+acpi_db_set_method_data (
+	char                            *type_arg,
+	char                            *index_arg,
+	char                            *value_arg);
+
+acpi_status
+acpi_db_display_objects (
+	char                            *obj_type_arg,
+	char                            *display_count_arg);
+
+acpi_status
+acpi_db_find_name_in_namespace (
+	char                            *name_arg);
+
+void
+acpi_db_set_scope (
+	char                            *name);
+
+acpi_status
+acpi_db_sleep (
+	char                            *object_arg);
+
+void
+acpi_db_find_references (
+	char                            *object_arg);
+
+void
+acpi_db_display_locks (void);
+
+
+void
+acpi_db_display_resources (
+	char                            *object_arg);
+
+void
+acpi_db_display_gpes (void);
+
+void
+acpi_db_check_integrity (
+	void);
+
+acpi_status
+acpi_db_integrity_walk (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_db_walk_and_match_name (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_db_walk_for_references (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_db_walk_for_specific_objects (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+void
+acpi_db_generate_gpe (
+	char                            *gpe_arg,
+	char                            *block_arg);
+
+/*
+ * dbdisply - debug display commands
+ */
+
+void
+acpi_db_display_method_info (
+	union acpi_parse_object         *op);
+
+void
+acpi_db_decode_and_display_object (
+	char                            *target,
+	char                            *output_type);
+
+void
+acpi_db_display_result_object (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_db_display_all_methods (
+	char                            *display_count_arg);
+
+void
+acpi_db_display_arguments (
+	void);
+
+void
+acpi_db_display_locals (
+	void);
+
+void
+acpi_db_display_results (
+	void);
+
+void
+acpi_db_display_calling_tree (
+	void);
+
+void
+acpi_db_display_object_type (
+	char                            *object_arg);
+
+void
+acpi_db_display_argument_object (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_db_dump_parser_descriptor (
+	union acpi_parse_object         *op);
+
+void *
+acpi_db_get_pointer (
+	void                            *target);
+
+
+/*
+ * dbexec - debugger control method execution
+ */
+
+void
+acpi_db_execute (
+	char                            *name,
+	char                            **args,
+	u32                             flags);
+
+void
+acpi_db_create_execution_threads (
+	char                            *num_threads_arg,
+	char                            *num_loops_arg,
+	char                            *method_name_arg);
+
+acpi_status
+acpi_db_execute_method (
+	struct acpi_db_method_info      *info,
+	struct acpi_buffer              *return_obj);
+
+void
+acpi_db_execute_setup (
+	struct acpi_db_method_info      *info);
+
+u32
+acpi_db_get_outstanding_allocations (
+	void);
+
+void ACPI_SYSTEM_XFACE
+acpi_db_method_thread (
+	void                            *context);
+
+acpi_status
+acpi_db_execution_walk (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+
+/*
+ * dbfileio - Debugger file I/O commands
+ */
+
+acpi_object_type
+acpi_db_match_argument (
+	char                            *user_argument,
+	struct argument_info            *arguments);
+
+acpi_status
+ae_local_load_table (
+	struct acpi_table_header        *table_ptr);
+
+void
+acpi_db_close_debug_file (
+	void);
+
+void
+acpi_db_open_debug_file (
+	char                            *name);
+
+acpi_status
+acpi_db_load_acpi_table (
+	char                            *filename);
+
+acpi_status
+acpi_db_get_table_from_file (
+	char                            *filename,
+	struct acpi_table_header        **table);
+
+acpi_status
+acpi_db_read_table_from_file (
+	char                            *filename,
+	struct acpi_table_header        **table);
+
+/*
+ * dbhistry - debugger HISTORY command
+ */
+
+void
+acpi_db_add_to_history (
+	char                            *command_line);
+
+void
+acpi_db_display_history (void);
+
+char *
+acpi_db_get_from_history (
+	char                            *command_num_arg);
+
+
+/*
+ * dbinput - user front-end to the AML debugger
+ */
+
+acpi_status
+acpi_db_command_dispatch (
+	char                            *input_buffer,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+void ACPI_SYSTEM_XFACE
+acpi_db_execute_thread (
+	void                            *context);
+
+void
+acpi_db_display_help (
+	char                            *help_type);
+
+char *
+acpi_db_get_next_token (
+	char                            *string,
+	char                            **next);
+
+u32
+acpi_db_get_line (
+	char                            *input_buffer);
+
+u32
+acpi_db_match_command (
+	char                            *user_command);
+
+void
+acpi_db_single_thread (
+	void);
+
+
+/*
+ * dbstats - Generation and display of ACPI table statistics
+ */
+
+void
+acpi_db_generate_statistics (
+	union acpi_parse_object         *root,
+	u8                              is_method);
+
+
+acpi_status
+acpi_db_display_statistics (
+	char                            *type_arg);
+
+acpi_status
+acpi_db_classify_one_object (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+void
+acpi_db_count_namespace_objects (
+	void);
+
+void
+acpi_db_enumerate_object (
+	union acpi_operand_object       *obj_desc);
+
+
+/*
+ * dbutils - AML debugger utilities
+ */
+
+void
+acpi_db_set_output_destination (
+	u32                             where);
+
+void
+acpi_db_dump_buffer (
+	u32                             address);
+
+void
+acpi_db_dump_object (
+	union acpi_object               *obj_desc,
+	u32                             level);
+
+void
+acpi_db_prep_namestring (
+	char                            *name);
+
+
+acpi_status
+acpi_db_second_pass_parse (
+	union acpi_parse_object         *root);
+
+struct acpi_namespace_node *
+acpi_db_local_ns_lookup (
+	char                            *name);
+
+
+#endif  /* __ACDEBUG_H__ */
diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h
new file mode 100644
index 000000000000..26d907eae6fe
--- /dev/null
+++ b/include/acpi/acdisasm.h
@@ -0,0 +1,428 @@
+/******************************************************************************
+ *
+ * Name: acdisasm.h - AML disassembler
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACDISASM_H__
+#define __ACDISASM_H__
+
+#include "amlresrc.h"
+
+
+#define BLOCK_NONE              0
+#define BLOCK_PAREN             1
+#define BLOCK_BRACE             2
+#define BLOCK_COMMA_LIST        4
+
+struct acpi_external_list
+{
+	char                                *path;
+	struct acpi_external_list           *next;
+};
+
+extern struct acpi_external_list        *acpi_gbl_external_list;
+extern const char                       *acpi_gbl_io_decode[2];
+extern const char                       *acpi_gbl_word_decode[4];
+extern const char                       *acpi_gbl_consume_decode[2];
+extern const char                       *acpi_gbl_min_decode[2];
+extern const char                       *acpi_gbl_max_decode[2];
+extern const char                       *acpi_gbl_DECdecode[2];
+extern const char                       *acpi_gbl_RNGdecode[4];
+extern const char                       *acpi_gbl_MEMdecode[4];
+extern const char                       *acpi_gbl_RWdecode[2];
+extern const char                       *acpi_gbl_irq_decode[2];
+extern const char                       *acpi_gbl_HEdecode[2];
+extern const char                       *acpi_gbl_LLdecode[2];
+extern const char                       *acpi_gbl_SHRdecode[2];
+extern const char                       *acpi_gbl_TYPdecode[4];
+extern const char                       *acpi_gbl_BMdecode[2];
+extern const char                       *acpi_gbl_SIZdecode[4];
+extern const char                       *acpi_gbl_TTPdecode[2];
+extern const char                       *acpi_gbl_MTPdecode[4];
+extern const char                       *acpi_gbl_TRSdecode[2];
+
+
+extern const char                       *acpi_gbl_lock_rule[ACPI_NUM_LOCK_RULES];
+extern const char                       *acpi_gbl_access_types[ACPI_NUM_ACCESS_TYPES];
+extern const char                       *acpi_gbl_update_rules[ACPI_NUM_UPDATE_RULES];
+extern const char                       *acpi_gbl_match_ops[ACPI_NUM_MATCH_OPS];
+
+
+struct acpi_op_walk_info
+{
+	u32                             level;
+	u32                             bit_offset;
+};
+
+typedef
+acpi_status (*asl_walk_callback) (
+	union acpi_parse_object             *op,
+	u32                                 level,
+	void                                *context);
+
+
+/*
+ * dmwalk
+ */
+
+void
+acpi_dm_walk_parse_tree (
+	union acpi_parse_object         *op,
+	asl_walk_callback               descending_callback,
+	asl_walk_callback               ascending_callback,
+	void                            *context);
+
+acpi_status
+acpi_dm_descending_op (
+	union acpi_parse_object         *op,
+	u32                             level,
+	void                            *context);
+
+acpi_status
+acpi_dm_ascending_op (
+	union acpi_parse_object         *op,
+	u32                             level,
+	void                            *context);
+
+
+/*
+ * dmopcode
+ */
+
+void
+acpi_dm_validate_name (
+	char                            *name,
+	union acpi_parse_object         *op);
+
+u32
+acpi_dm_dump_name (
+	char                            *name);
+
+void
+acpi_dm_unicode (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_disassemble (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *origin,
+	u32                             num_opcodes);
+
+void
+acpi_dm_namestring (
+	char                            *name);
+
+void
+acpi_dm_display_path (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_disassemble_one_op (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_op_walk_info        *info,
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_decode_internal_object (
+	union acpi_operand_object       *obj_desc);
+
+u32
+acpi_dm_block_type (
+	union acpi_parse_object         *op);
+
+u32
+acpi_dm_list_type (
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ps_display_object_pathname (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_method_flags (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_field_flags (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_address_space (
+	u8                              space_id);
+
+void
+acpi_dm_region_flags (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_match_op (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_match_keyword (
+	union acpi_parse_object         *op);
+
+u8
+acpi_dm_comma_if_list_member (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_comma_if_field_member (
+	union acpi_parse_object         *op);
+
+
+/*
+ * dmobject
+ */
+
+void
+acpi_dm_decode_node (
+	struct acpi_namespace_node      *node);
+
+void
+acpi_dm_display_internal_object (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_dm_display_arguments (
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_dm_display_locals (
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_dm_dump_method_info (
+	acpi_status                     status,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+
+/*
+ * dmbuffer
+ */
+
+void
+acpi_is_eisa_id (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_eisa_id (
+	u32                             encoded_id);
+
+u8
+acpi_dm_is_unicode_buffer (
+	union acpi_parse_object         *op);
+
+u8
+acpi_dm_is_string_buffer (
+	union acpi_parse_object         *op);
+
+
+/*
+ * dmresrc
+ */
+
+void
+acpi_dm_disasm_byte_list (
+	u32                             level,
+	u8                              *byte_data,
+	u32                             byte_count);
+
+void
+acpi_dm_byte_list (
+	struct acpi_op_walk_info        *info,
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_resource_descriptor (
+	struct acpi_op_walk_info        *info,
+	u8                              *byte_data,
+	u32                             byte_count);
+
+u8
+acpi_dm_is_resource_descriptor (
+	union acpi_parse_object         *op);
+
+void
+acpi_dm_indent (
+	u32                             level);
+
+void
+acpi_dm_bit_list (
+	u16                             mask);
+
+void
+acpi_dm_decode_attribute (
+	u8                              attribute);
+
+/*
+ * dmresrcl
+ */
+
+void
+acpi_dm_io_flags (
+		u8                          flags);
+
+void
+acpi_dm_memory_flags (
+	u8                              flags,
+	u8                              specific_flags);
+
+void
+acpi_dm_word_descriptor (
+	struct asl_word_address_desc    *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_dword_descriptor (
+	struct asl_dword_address_desc   *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_extended_descriptor (
+	struct asl_extended_address_desc   *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_qword_descriptor (
+	struct asl_qword_address_desc   *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_memory24_descriptor (
+	struct asl_memory_24_desc       *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_memory32_descriptor (
+	struct asl_memory_32_desc       *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_fixed_mem32_descriptor (
+	struct asl_fixed_memory_32_desc *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_generic_register_descriptor (
+	struct asl_general_register_desc *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_interrupt_descriptor (
+	struct asl_extended_xrupt_desc *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_vendor_large_descriptor (
+	struct asl_large_vendor_desc    *resource,
+	u32                             length,
+	u32                             level);
+
+
+/*
+ * dmresrcs
+ */
+
+void
+acpi_dm_irq_descriptor (
+	struct asl_irq_format_desc      *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_dma_descriptor (
+	struct asl_dma_format_desc      *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_io_descriptor (
+	struct asl_io_port_desc         *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_fixed_io_descriptor (
+	struct asl_fixed_io_port_desc   *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_start_dependent_descriptor (
+	struct asl_start_dependent_desc *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_end_dependent_descriptor (
+	struct asl_start_dependent_desc *resource,
+	u32                             length,
+	u32                             level);
+
+void
+acpi_dm_vendor_small_descriptor (
+	struct asl_small_vendor_desc    *resource,
+	u32                             length,
+	u32                             level);
+
+
+/*
+ * dmutils
+ */
+
+void
+acpi_dm_add_to_external_list (
+	char                            *path);
+
+#endif  /* __ACDISASM_H__ */
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
new file mode 100644
index 000000000000..237d63433581
--- /dev/null
+++ b/include/acpi/acdispat.h
@@ -0,0 +1,532 @@
+/******************************************************************************
+ *
+ * Name: acdispat.h - dispatcher (parser to interpreter interface)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#ifndef _ACDISPAT_H_
+#define _ACDISPAT_H_
+
+
+#define NAMEOF_LOCAL_NTE    "__L0"
+#define NAMEOF_ARG_NTE      "__A0"
+
+
+/* Common interfaces */
+
+acpi_status
+acpi_ds_obj_stack_push (
+	void                            *object,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_obj_stack_pop (
+	u32                             pop_count,
+	struct acpi_walk_state          *walk_state);
+
+#ifdef ACPI_FUTURE_USAGE
+void *
+acpi_ds_obj_stack_get_value (
+	u32                             index,
+	struct acpi_walk_state          *walk_state);
+#endif
+
+acpi_status
+acpi_ds_obj_stack_pop_object (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state);
+
+
+/* dsopcode - support for late evaluation */
+
+acpi_status
+acpi_ds_execute_arguments (
+	struct acpi_namespace_node      *node,
+	struct acpi_namespace_node      *scope_node,
+	u32                             aml_length,
+	u8                              *aml_start);
+
+acpi_status
+acpi_ds_get_buffer_field_arguments (
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ds_get_region_arguments (
+	union acpi_operand_object       *rgn_desc);
+
+acpi_status
+acpi_ds_get_buffer_arguments (
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ds_get_package_arguments (
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ds_init_buffer_field (
+	u16                             aml_opcode,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *buffer_desc,
+	union acpi_operand_object       *offset_desc,
+	union acpi_operand_object       *length_desc,
+	union acpi_operand_object       *result_desc);
+
+acpi_status
+acpi_ds_eval_buffer_field_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ds_eval_region_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ds_eval_data_object_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ds_initialize_region (
+	acpi_handle                     obj_handle);
+
+
+/* dsctrl - Parser/Interpreter interface, control stack routines */
+
+
+acpi_status
+acpi_ds_exec_begin_control_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ds_exec_end_control_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+
+/* dsexec - Parser/Interpreter interface, method execution callbacks */
+
+
+acpi_status
+acpi_ds_get_predicate_value (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *result_obj);
+
+acpi_status
+acpi_ds_exec_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op);
+
+acpi_status
+acpi_ds_exec_end_op (
+	struct acpi_walk_state          *state);
+
+
+/* dsfield - Parser/Interpreter interface for AML fields */
+
+acpi_status
+acpi_ds_get_field_names (
+	struct acpi_create_field_info   *info,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *arg);
+
+acpi_status
+acpi_ds_create_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_create_bank_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_create_index_field (
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *region_node,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_create_buffer_field (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_init_field_objects (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state);
+
+
+/* dsload - Parser/Interpreter interface, namespace load callbacks */
+
+acpi_status
+acpi_ds_load1_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op);
+
+acpi_status
+acpi_ds_load1_end_op (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_load2_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op);
+
+acpi_status
+acpi_ds_load2_end_op (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_init_callbacks (
+	struct acpi_walk_state          *walk_state,
+	u32                             pass_number);
+
+
+/* dsmthdat - method data (locals/args) */
+
+
+acpi_status
+acpi_ds_store_object_to_local (
+	u16                             opcode,
+	u32                             index,
+	union acpi_operand_object       *src_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_method_data_get_entry (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       ***node);
+
+void
+acpi_ds_method_data_delete_all (
+	struct acpi_walk_state          *walk_state);
+
+u8
+acpi_ds_is_method_value (
+	union acpi_operand_object       *obj_desc);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_object_type
+acpi_ds_method_data_get_type (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state);
+#endif
+
+acpi_status
+acpi_ds_method_data_get_value (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       **dest_desc);
+
+void
+acpi_ds_method_data_delete_value (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_method_data_init_args (
+	union acpi_operand_object       **params,
+	u32                             max_param_count,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_method_data_get_node (
+	u16                             opcode,
+	u32                             index,
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      **node);
+
+void
+acpi_ds_method_data_init (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_method_data_set_value (
+	u16                             opcode,
+	u32                             index,
+	union acpi_operand_object       *object,
+	struct acpi_walk_state          *walk_state);
+
+
+/* dsmethod - Parser/Interpreter interface - control method parsing */
+
+acpi_status
+acpi_ds_parse_method (
+	acpi_handle                     obj_handle);
+
+acpi_status
+acpi_ds_call_control_method (
+	struct acpi_thread_state        *thread,
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ds_restart_control_method (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *return_desc);
+
+acpi_status
+acpi_ds_terminate_control_method (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_begin_method_execution (
+	struct acpi_namespace_node      *method_node,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_namespace_node      *calling_method_node);
+
+
+/* dsobj - Parser/Interpreter interface - object initialization and conversion */
+
+acpi_status
+acpi_ds_init_one_object (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_ds_initialize_objects (
+	struct acpi_table_desc          *table_desc,
+	struct acpi_namespace_node      *start_node);
+
+acpi_status
+acpi_ds_build_internal_buffer_obj (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u32                             buffer_length,
+	union acpi_operand_object       **obj_desc_ptr);
+
+acpi_status
+acpi_ds_build_internal_package_obj (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u32                             package_length,
+	union acpi_operand_object       **obj_desc);
+
+acpi_status
+acpi_ds_build_internal_object (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	union acpi_operand_object       **obj_desc_ptr);
+
+acpi_status
+acpi_ds_init_object_from_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	u16                             opcode,
+	union acpi_operand_object       **obj_desc);
+
+acpi_status
+acpi_ds_create_node (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      *node,
+	union acpi_parse_object         *op);
+
+
+/* dsutils - Parser/Interpreter interface utility routines */
+
+void
+acpi_ds_clear_implicit_return (
+	struct acpi_walk_state          *walk_state);
+
+u8
+acpi_ds_do_implicit_return (
+	union acpi_operand_object       *return_desc,
+	struct acpi_walk_state          *walk_state,
+	u8                              add_reference);
+
+u8
+acpi_ds_is_result_used (
+	union acpi_parse_object         *op,
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_ds_delete_result_if_not_used (
+	union acpi_parse_object         *op,
+	union acpi_operand_object       *result_obj,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_create_operand (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *arg,
+	u32                             args_remaining);
+
+acpi_status
+acpi_ds_create_operands (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *first_arg);
+
+acpi_status
+acpi_ds_resolve_operands (
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_ds_clear_operands (
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * dswscope - Scope Stack manipulation
+ */
+
+acpi_status
+acpi_ds_scope_stack_push (
+	struct acpi_namespace_node      *node,
+	acpi_object_type                type,
+	struct acpi_walk_state          *walk_state);
+
+
+acpi_status
+acpi_ds_scope_stack_pop (
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_ds_scope_stack_clear (
+	struct acpi_walk_state          *walk_state);
+
+
+/* dswstate - parser WALK_STATE management routines */
+
+struct acpi_walk_state *
+acpi_ds_create_walk_state (
+	acpi_owner_id                   owner_id,
+	union acpi_parse_object         *origin,
+	union acpi_operand_object       *mth_desc,
+	struct acpi_thread_state        *thread);
+
+acpi_status
+acpi_ds_init_aml_walk (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	struct acpi_namespace_node      *method_node,
+	u8                              *aml_start,
+	u32                             aml_length,
+	struct acpi_parameter_info      *info,
+	u32                             pass_number);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ds_obj_stack_delete_all (
+	struct acpi_walk_state          *walk_state);
+#endif
+
+acpi_status
+acpi_ds_obj_stack_pop_and_delete (
+	u32                             pop_count,
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_ds_delete_walk_state (
+	struct acpi_walk_state          *walk_state);
+
+struct acpi_walk_state *
+acpi_ds_pop_walk_state (
+	struct acpi_thread_state        *thread);
+
+void
+acpi_ds_push_walk_state (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_thread_state        *thread);
+
+acpi_status
+acpi_ds_result_stack_pop (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_result_stack_push (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_result_stack_clear (
+	struct acpi_walk_state          *walk_state);
+
+struct acpi_walk_state *
+acpi_ds_get_current_walk_state (
+	struct acpi_thread_state        *thread);
+
+#ifdef ACPI_ENABLE_OBJECT_CACHE
+void
+acpi_ds_delete_walk_state_cache (
+	void);
+#endif
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ds_result_insert (
+	void                            *object,
+	u32                             index,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_result_remove (
+	union acpi_operand_object       **object,
+	u32                             index,
+	struct acpi_walk_state          *walk_state);
+#endif
+
+acpi_status
+acpi_ds_result_pop (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_result_push (
+	union acpi_operand_object       *object,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ds_result_pop_from_bottom (
+	union acpi_operand_object       **object,
+	struct acpi_walk_state          *walk_state);
+
+#endif /* _ACDISPAT_H_ */
diff --git a/include/acpi/acevents.h b/include/acpi/acevents.h
new file mode 100644
index 000000000000..2dec083ba1cd
--- /dev/null
+++ b/include/acpi/acevents.h
@@ -0,0 +1,320 @@
+/******************************************************************************
+ *
+ * Name: acevents.h - Event subcomponent prototypes and defines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACEVENTS_H__
+#define __ACEVENTS_H__
+
+
+acpi_status
+acpi_ev_initialize_events (
+	void);
+
+acpi_status
+acpi_ev_install_xrupt_handlers (
+	void);
+
+
+/*
+ * Evfixed - Fixed event handling
+ */
+
+acpi_status
+acpi_ev_fixed_event_initialize (
+	void);
+
+u32
+acpi_ev_fixed_event_detect (
+	void);
+
+u32
+acpi_ev_fixed_event_dispatch (
+	u32                             event);
+
+
+/*
+ * Evmisc
+ */
+
+u8
+acpi_ev_is_notify_object (
+	struct acpi_namespace_node      *node);
+
+acpi_status
+acpi_ev_acquire_global_lock(
+	u16                             timeout);
+
+acpi_status
+acpi_ev_release_global_lock(
+	void);
+
+acpi_status
+acpi_ev_init_global_lock_handler (
+	void);
+
+u32
+acpi_ev_get_gpe_number_index (
+	u32                             gpe_number);
+
+acpi_status
+acpi_ev_queue_notify_request (
+	struct acpi_namespace_node      *node,
+	u32                             notify_value);
+
+void ACPI_SYSTEM_XFACE
+acpi_ev_notify_dispatch (
+	void                            *context);
+
+
+/*
+ * Evgpe - GPE handling and dispatch
+ */
+
+acpi_status
+acpi_ev_walk_gpe_list (
+	ACPI_GPE_CALLBACK       gpe_walk_callback,
+	u32                             flags);
+
+u8
+acpi_ev_valid_gpe_event (
+	struct acpi_gpe_event_info      *gpe_event_info);
+
+acpi_status
+acpi_ev_update_gpe_enable_masks (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              type);
+
+acpi_status
+acpi_ev_enable_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              write_to_hardware);
+
+acpi_status
+acpi_ev_disable_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info);
+
+struct acpi_gpe_event_info *
+acpi_ev_get_gpe_event_info (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number);
+
+acpi_status
+acpi_ev_gpe_initialize (
+	void);
+
+acpi_status
+acpi_ev_create_gpe_block (
+	struct acpi_namespace_node      *gpe_device,
+	struct acpi_generic_address     *gpe_block_address,
+	u32                             register_count,
+	u8                              gpe_block_base_number,
+	u32                             interrupt_level,
+	struct acpi_gpe_block_info      **return_gpe_block);
+
+acpi_status
+acpi_ev_delete_gpe_block (
+	struct acpi_gpe_block_info      *gpe_block);
+
+acpi_status
+acpi_ev_delete_gpe_handlers (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+u32
+acpi_ev_gpe_dispatch (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u32                             gpe_number);
+
+u32
+acpi_ev_gpe_detect (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_list);
+
+acpi_status
+acpi_ev_set_gpe_type (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              type);
+
+acpi_status
+acpi_ev_check_for_wake_only_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info);
+
+/*
+ * Evregion - Address Space handling
+ */
+
+acpi_status
+acpi_ev_install_region_handlers (
+	void);
+
+acpi_status
+acpi_ev_initialize_op_regions (
+	void);
+
+acpi_status
+acpi_ev_address_space_dispatch (
+	union acpi_operand_object      *region_obj,
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	void                            *value);
+
+acpi_status
+acpi_ev_install_handler (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_ev_attach_region (
+	union acpi_operand_object       *handler_obj,
+	union acpi_operand_object       *region_obj,
+	u8                              acpi_ns_is_locked);
+
+void
+acpi_ev_detach_region (
+	union acpi_operand_object      *region_obj,
+	u8                              acpi_ns_is_locked);
+
+acpi_status
+acpi_ev_install_space_handler (
+	struct acpi_namespace_node      *node,
+	acpi_adr_space_type             space_id,
+	acpi_adr_space_handler          handler,
+	acpi_adr_space_setup            setup,
+	void                            *context);
+
+acpi_status
+acpi_ev_execute_reg_methods (
+	struct acpi_namespace_node      *node,
+	acpi_adr_space_type             space_id);
+
+acpi_status
+acpi_ev_execute_reg_method (
+	union acpi_operand_object      *region_obj,
+	u32                             function);
+
+acpi_status
+acpi_ev_reg_run (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+/*
+ * Evregini - Region initialization and setup
+ */
+
+acpi_status
+acpi_ev_system_memory_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_io_space_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_pci_config_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_cmos_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_pci_bar_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_default_region_setup (
+	acpi_handle                     handle,
+	u32                             function,
+	void                            *handler_context,
+	void                            **region_context);
+
+acpi_status
+acpi_ev_initialize_region (
+	union acpi_operand_object       *region_obj,
+	u8                              acpi_ns_locked);
+
+
+/*
+ * Evsci - SCI (System Control Interrupt) handling/dispatch
+ */
+
+u32 ACPI_SYSTEM_XFACE
+acpi_ev_gpe_xrupt_handler (
+	void                            *context);
+
+u32
+acpi_ev_install_sci_handler (
+	void);
+
+acpi_status
+acpi_ev_remove_sci_handler (
+	void);
+
+u32
+acpi_ev_initialize_sCI (
+	u32                             program_sCI);
+
+void
+acpi_ev_terminate (
+	void);
+
+
+#endif  /* __ACEVENTS_H__  */
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
new file mode 100644
index 000000000000..53f8b50fac1a
--- /dev/null
+++ b/include/acpi/acexcep.h
@@ -0,0 +1,308 @@
+/******************************************************************************
+ *
+ * Name: acexcep.h - Exception codes returned by the ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACEXCEP_H__
+#define __ACEXCEP_H__
+
+
+/*
+ * Exceptions returned by external ACPI interfaces
+ */
+
+#define AE_CODE_ENVIRONMENTAL           0x0000
+#define AE_CODE_PROGRAMMER              0x1000
+#define AE_CODE_ACPI_TABLES             0x2000
+#define AE_CODE_AML                     0x3000
+#define AE_CODE_CONTROL                 0x4000
+#define AE_CODE_MASK                    0xF000
+
+
+#define ACPI_SUCCESS(a)                 (!(a))
+#define ACPI_FAILURE(a)                 (a)
+
+
+#define AE_OK                           (acpi_status) 0x0000
+
+/*
+ * Environmental exceptions
+ */
+#define AE_ERROR                        (acpi_status) (0x0001 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_ACPI_TABLES               (acpi_status) (0x0002 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_NAMESPACE                 (acpi_status) (0x0003 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_MEMORY                    (acpi_status) (0x0004 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_FOUND                    (acpi_status) (0x0005 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_EXIST                    (acpi_status) (0x0006 | AE_CODE_ENVIRONMENTAL)
+#define AE_ALREADY_EXISTS               (acpi_status) (0x0007 | AE_CODE_ENVIRONMENTAL)
+#define AE_TYPE                         (acpi_status) (0x0008 | AE_CODE_ENVIRONMENTAL)
+#define AE_NULL_OBJECT                  (acpi_status) (0x0009 | AE_CODE_ENVIRONMENTAL)
+#define AE_NULL_ENTRY                   (acpi_status) (0x000A | AE_CODE_ENVIRONMENTAL)
+#define AE_BUFFER_OVERFLOW              (acpi_status) (0x000B | AE_CODE_ENVIRONMENTAL)
+#define AE_STACK_OVERFLOW               (acpi_status) (0x000C | AE_CODE_ENVIRONMENTAL)
+#define AE_STACK_UNDERFLOW              (acpi_status) (0x000D | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_IMPLEMENTED              (acpi_status) (0x000E | AE_CODE_ENVIRONMENTAL)
+#define AE_VERSION_MISMATCH             (acpi_status) (0x000F | AE_CODE_ENVIRONMENTAL)
+#define AE_SUPPORT                      (acpi_status) (0x0010 | AE_CODE_ENVIRONMENTAL)
+#define AE_SHARE                        (acpi_status) (0x0011 | AE_CODE_ENVIRONMENTAL)
+#define AE_LIMIT                        (acpi_status) (0x0012 | AE_CODE_ENVIRONMENTAL)
+#define AE_TIME                         (acpi_status) (0x0013 | AE_CODE_ENVIRONMENTAL)
+#define AE_UNKNOWN_STATUS               (acpi_status) (0x0014 | AE_CODE_ENVIRONMENTAL)
+#define AE_ACQUIRE_DEADLOCK             (acpi_status) (0x0015 | AE_CODE_ENVIRONMENTAL)
+#define AE_RELEASE_DEADLOCK             (acpi_status) (0x0016 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_ACQUIRED                 (acpi_status) (0x0017 | AE_CODE_ENVIRONMENTAL)
+#define AE_ALREADY_ACQUIRED             (acpi_status) (0x0018 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_HARDWARE_RESPONSE         (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_GLOBAL_LOCK               (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL)
+#define AE_LOGICAL_ADDRESS              (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL)
+#define AE_ABORT_METHOD                 (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL)
+#define AE_SAME_HANDLER                 (acpi_status) (0x001D | AE_CODE_ENVIRONMENTAL)
+#define AE_WAKE_ONLY_GPE                (acpi_status) (0x001E | AE_CODE_ENVIRONMENTAL)
+
+#define AE_CODE_ENV_MAX                 0x001E
+
+/*
+ * Programmer exceptions
+ */
+#define AE_BAD_PARAMETER                (acpi_status) (0x0001 | AE_CODE_PROGRAMMER)
+#define AE_BAD_CHARACTER                (acpi_status) (0x0002 | AE_CODE_PROGRAMMER)
+#define AE_BAD_PATHNAME                 (acpi_status) (0x0003 | AE_CODE_PROGRAMMER)
+#define AE_BAD_DATA                     (acpi_status) (0x0004 | AE_CODE_PROGRAMMER)
+#define AE_BAD_ADDRESS                  (acpi_status) (0x0005 | AE_CODE_PROGRAMMER)
+#define AE_ALIGNMENT                    (acpi_status) (0x0006 | AE_CODE_PROGRAMMER)
+#define AE_BAD_HEX_CONSTANT             (acpi_status) (0x0007 | AE_CODE_PROGRAMMER)
+#define AE_BAD_OCTAL_CONSTANT           (acpi_status) (0x0008 | AE_CODE_PROGRAMMER)
+#define AE_BAD_DECIMAL_CONSTANT         (acpi_status) (0x0009 | AE_CODE_PROGRAMMER)
+
+#define AE_CODE_PGM_MAX                 0x0009
+
+
+/*
+ * Acpi table exceptions
+ */
+#define AE_BAD_SIGNATURE                (acpi_status) (0x0001 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_HEADER                   (acpi_status) (0x0002 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_CHECKSUM                 (acpi_status) (0x0003 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_VALUE                    (acpi_status) (0x0004 | AE_CODE_ACPI_TABLES)
+#define AE_TABLE_NOT_SUPPORTED          (acpi_status) (0x0005 | AE_CODE_ACPI_TABLES)
+#define AE_INVALID_TABLE_LENGTH         (acpi_status) (0x0006 | AE_CODE_ACPI_TABLES)
+
+#define AE_CODE_TBL_MAX                 0x0006
+
+
+/*
+ * AML exceptions.  These are caused by problems with
+ * the actual AML byte stream
+ */
+#define AE_AML_ERROR                    (acpi_status) (0x0001 | AE_CODE_AML)
+#define AE_AML_PARSE                    (acpi_status) (0x0002 | AE_CODE_AML)
+#define AE_AML_BAD_OPCODE               (acpi_status) (0x0003 | AE_CODE_AML)
+#define AE_AML_NO_OPERAND               (acpi_status) (0x0004 | AE_CODE_AML)
+#define AE_AML_OPERAND_TYPE             (acpi_status) (0x0005 | AE_CODE_AML)
+#define AE_AML_OPERAND_VALUE            (acpi_status) (0x0006 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_LOCAL      (acpi_status) (0x0007 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ARG        (acpi_status) (0x0008 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ELEMENT    (acpi_status) (0x0009 | AE_CODE_AML)
+#define AE_AML_NUMERIC_OVERFLOW         (acpi_status) (0x000A | AE_CODE_AML)
+#define AE_AML_REGION_LIMIT             (acpi_status) (0x000B | AE_CODE_AML)
+#define AE_AML_BUFFER_LIMIT             (acpi_status) (0x000C | AE_CODE_AML)
+#define AE_AML_PACKAGE_LIMIT            (acpi_status) (0x000D | AE_CODE_AML)
+#define AE_AML_DIVIDE_BY_ZERO           (acpi_status) (0x000E | AE_CODE_AML)
+#define AE_AML_BAD_NAME                 (acpi_status) (0x000F | AE_CODE_AML)
+#define AE_AML_NAME_NOT_FOUND           (acpi_status) (0x0010 | AE_CODE_AML)
+#define AE_AML_INTERNAL                 (acpi_status) (0x0011 | AE_CODE_AML)
+#define AE_AML_INVALID_SPACE_ID         (acpi_status) (0x0012 | AE_CODE_AML)
+#define AE_AML_STRING_LIMIT             (acpi_status) (0x0013 | AE_CODE_AML)
+#define AE_AML_NO_RETURN_VALUE          (acpi_status) (0x0014 | AE_CODE_AML)
+#define AE_AML_METHOD_LIMIT             (acpi_status) (0x0015 | AE_CODE_AML)
+#define AE_AML_NOT_OWNER                (acpi_status) (0x0016 | AE_CODE_AML)
+#define AE_AML_MUTEX_ORDER              (acpi_status) (0x0017 | AE_CODE_AML)
+#define AE_AML_MUTEX_NOT_ACQUIRED       (acpi_status) (0x0018 | AE_CODE_AML)
+#define AE_AML_INVALID_RESOURCE_TYPE    (acpi_status) (0x0019 | AE_CODE_AML)
+#define AE_AML_INVALID_INDEX            (acpi_status) (0x001A | AE_CODE_AML)
+#define AE_AML_REGISTER_LIMIT           (acpi_status) (0x001B | AE_CODE_AML)
+#define AE_AML_NO_WHILE                 (acpi_status) (0x001C | AE_CODE_AML)
+#define AE_AML_ALIGNMENT                (acpi_status) (0x001D | AE_CODE_AML)
+#define AE_AML_NO_RESOURCE_END_TAG      (acpi_status) (0x001E | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_VALUE       (acpi_status) (0x001F | AE_CODE_AML)
+#define AE_AML_CIRCULAR_REFERENCE       (acpi_status) (0x0020 | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_LENGTH      (acpi_status) (0x0021 | AE_CODE_AML)
+
+#define AE_CODE_AML_MAX                 0x0021
+
+/*
+ * Internal exceptions used for control
+ */
+#define AE_CTRL_RETURN_VALUE            (acpi_status) (0x0001 | AE_CODE_CONTROL)
+#define AE_CTRL_PENDING                 (acpi_status) (0x0002 | AE_CODE_CONTROL)
+#define AE_CTRL_TERMINATE               (acpi_status) (0x0003 | AE_CODE_CONTROL)
+#define AE_CTRL_TRUE                    (acpi_status) (0x0004 | AE_CODE_CONTROL)
+#define AE_CTRL_FALSE                   (acpi_status) (0x0005 | AE_CODE_CONTROL)
+#define AE_CTRL_DEPTH                   (acpi_status) (0x0006 | AE_CODE_CONTROL)
+#define AE_CTRL_END                     (acpi_status) (0x0007 | AE_CODE_CONTROL)
+#define AE_CTRL_TRANSFER                (acpi_status) (0x0008 | AE_CODE_CONTROL)
+#define AE_CTRL_BREAK                   (acpi_status) (0x0009 | AE_CODE_CONTROL)
+#define AE_CTRL_CONTINUE                (acpi_status) (0x000A | AE_CODE_CONTROL)
+#define AE_CTRL_SKIP                    (acpi_status) (0x000B | AE_CODE_CONTROL)
+
+#define AE_CODE_CTRL_MAX                0x000B
+
+
+#ifdef DEFINE_ACPI_GLOBALS
+
+/*
+ * String versions of the exception codes above
+ * These strings must match the corresponding defines exactly
+ */
+char const   *acpi_gbl_exception_names_env[] =
+{
+	"AE_OK",
+	"AE_ERROR",
+	"AE_NO_ACPI_TABLES",
+	"AE_NO_NAMESPACE",
+	"AE_NO_MEMORY",
+	"AE_NOT_FOUND",
+	"AE_NOT_EXIST",
+	"AE_ALREADY_EXISTS",
+	"AE_TYPE",
+	"AE_NULL_OBJECT",
+	"AE_NULL_ENTRY",
+	"AE_BUFFER_OVERFLOW",
+	"AE_STACK_OVERFLOW",
+	"AE_STACK_UNDERFLOW",
+	"AE_NOT_IMPLEMENTED",
+	"AE_VERSION_MISMATCH",
+	"AE_SUPPORT",
+	"AE_SHARE",
+	"AE_LIMIT",
+	"AE_TIME",
+	"AE_UNKNOWN_STATUS",
+	"AE_ACQUIRE_DEADLOCK",
+	"AE_RELEASE_DEADLOCK",
+	"AE_NOT_ACQUIRED",
+	"AE_ALREADY_ACQUIRED",
+	"AE_NO_HARDWARE_RESPONSE",
+	"AE_NO_GLOBAL_LOCK",
+	"AE_LOGICAL_ADDRESS",
+	"AE_ABORT_METHOD",
+	"AE_SAME_HANDLER",
+	"AE_WAKE_ONLY_GPE"
+};
+
+char const   *acpi_gbl_exception_names_pgm[] =
+{
+	"AE_BAD_PARAMETER",
+	"AE_BAD_CHARACTER",
+	"AE_BAD_PATHNAME",
+	"AE_BAD_DATA",
+	"AE_BAD_ADDRESS",
+	"AE_ALIGNMENT",
+	"AE_BAD_HEX_CONSTANT",
+	"AE_BAD_OCTAL_CONSTANT",
+	"AE_BAD_DECIMAL_CONSTANT"
+};
+
+char const   *acpi_gbl_exception_names_tbl[] =
+{
+	"AE_BAD_SIGNATURE",
+	"AE_BAD_HEADER",
+	"AE_BAD_CHECKSUM",
+	"AE_BAD_VALUE",
+	"AE_TABLE_NOT_SUPPORTED",
+	"AE_INVALID_TABLE_LENGTH"
+};
+
+char const   *acpi_gbl_exception_names_aml[] =
+{
+	"AE_AML_ERROR",
+	"AE_AML_PARSE",
+	"AE_AML_BAD_OPCODE",
+	"AE_AML_NO_OPERAND",
+	"AE_AML_OPERAND_TYPE",
+	"AE_AML_OPERAND_VALUE",
+	"AE_AML_UNINITIALIZED_LOCAL",
+	"AE_AML_UNINITIALIZED_ARG",
+	"AE_AML_UNINITIALIZED_ELEMENT",
+	"AE_AML_NUMERIC_OVERFLOW",
+	"AE_AML_REGION_LIMIT",
+	"AE_AML_BUFFER_LIMIT",
+	"AE_AML_PACKAGE_LIMIT",
+	"AE_AML_DIVIDE_BY_ZERO",
+	"AE_AML_BAD_NAME",
+	"AE_AML_NAME_NOT_FOUND",
+	"AE_AML_INTERNAL",
+	"AE_AML_INVALID_SPACE_ID",
+	"AE_AML_STRING_LIMIT",
+	"AE_AML_NO_RETURN_VALUE",
+	"AE_AML_METHOD_LIMIT",
+	"AE_AML_NOT_OWNER",
+	"AE_AML_MUTEX_ORDER",
+	"AE_AML_MUTEX_NOT_ACQUIRED",
+	"AE_AML_INVALID_RESOURCE_TYPE",
+	"AE_AML_INVALID_INDEX",
+	"AE_AML_REGISTER_LIMIT",
+	"AE_AML_NO_WHILE",
+	"AE_AML_ALIGNMENT",
+	"AE_AML_NO_RESOURCE_END_TAG",
+	"AE_AML_BAD_RESOURCE_VALUE",
+	"AE_AML_CIRCULAR_REFERENCE",
+	"AE_AML_BAD_RESOURCE_LENGTH"
+};
+
+char const   *acpi_gbl_exception_names_ctrl[] =
+{
+	"AE_CTRL_RETURN_VALUE",
+	"AE_CTRL_PENDING",
+	"AE_CTRL_TERMINATE",
+	"AE_CTRL_TRUE",
+	"AE_CTRL_FALSE",
+	"AE_CTRL_DEPTH",
+	"AE_CTRL_END",
+	"AE_CTRL_TRANSFER",
+	"AE_CTRL_BREAK",
+	"AE_CTRL_CONTINUE",
+	"AE_CTRL_SKIP"
+};
+
+#endif /* ACPI GLOBALS */
+
+
+#endif /* __ACEXCEP_H__ */
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
new file mode 100644
index 000000000000..c7f387a972cb
--- /dev/null
+++ b/include/acpi/acglobal.h
@@ -0,0 +1,357 @@
+/******************************************************************************
+ *
+ * Name: acglobal.h - Declarations for global variables
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACGLOBAL_H__
+#define __ACGLOBAL_H__
+
+
+/*
+ * Ensure that the globals are actually defined and initialized only once.
+ *
+ * The use of these macros allows a single list of globals (here) in order
+ * to simplify maintenance of the code.
+ */
+#ifdef DEFINE_ACPI_GLOBALS
+#define ACPI_EXTERN
+#define ACPI_INIT_GLOBAL(a,b) a=b
+#else
+#define ACPI_EXTERN extern
+#define ACPI_INIT_GLOBAL(a,b) a
+#endif
+
+/*
+ * Keep local copies of these FADT-based registers.  NOTE: These globals
+ * are first in this file for alignment reasons on 64-bit systems.
+ */
+ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1a_enable;
+ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1b_enable;
+
+
+/*****************************************************************************
+ *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Runtime configuration of debug print levels */
+
+extern      u32                                 acpi_dbg_level;
+extern      u32                                 acpi_dbg_layer;
+
+/* Procedure nesting level for debug output */
+
+extern      u32                                 acpi_gbl_nesting_level;
+
+
+/*****************************************************************************
+ *
+ * Runtime configuration (static defaults that can be overriden at runtime)
+ *
+ ****************************************************************************/
+
+/*
+ * Enable "slack" in the AML interpreter?  Default is FALSE, and the
+ * interpreter strictly follows the ACPI specification.  Setting to TRUE
+ * allows the interpreter to forgive certain bad AML constructs.  Currently:
+ * 1) Allow "implicit return" of last value in a control method
+ * 2) Allow access beyond end of operation region
+ * 3) Allow access to uninitialized locals/args (auto-init to integer 0)
+ * 4) Allow ANY object type to be a source operand for the Store() operator
+ */
+ACPI_EXTERN u8       ACPI_INIT_GLOBAL (acpi_gbl_enable_interpreter_slack, FALSE);
+
+/*
+ * Automatically serialize ALL control methods? Default is FALSE, meaning
+ * to use the Serialized/not_serialized method flags on a per method basis.
+ * Only change this if the ASL code is poorly written and cannot handle
+ * reentrancy even though methods are marked "not_serialized".
+ */
+ACPI_EXTERN u8       ACPI_INIT_GLOBAL (acpi_gbl_all_methods_serialized, FALSE);
+
+/*
+ * Create the predefined _OSI method in the namespace? Default is TRUE
+ * because ACPI CA is fully compatible with other ACPI implementations.
+ * Changing this will revert ACPI CA (and machine ASL) to pre-OSI behavior.
+ */
+ACPI_EXTERN u8       ACPI_INIT_GLOBAL (acpi_gbl_create_osi_method, TRUE);
+
+/*
+ * Disable wakeup GPEs during runtime? Default is TRUE because WAKE and
+ * RUNTIME GPEs should never be shared, and WAKE GPEs should typically only
+ * be enabled just before going to sleep.
+ */
+ACPI_EXTERN u8       ACPI_INIT_GLOBAL (acpi_gbl_leave_wake_gpes_disabled, TRUE);
+
+
+/*****************************************************************************
+ *
+ * ACPI Table globals
+ *
+ ****************************************************************************/
+
+/*
+ * Table pointers.
+ * Although these pointers are somewhat redundant with the global acpi_table,
+ * they are convenient because they are typed pointers.
+ *
+ * These tables are single-table only; meaning that there can be at most one
+ * of each in the system.  Each global points to the actual table.
+ */
+ACPI_EXTERN u32                                 acpi_gbl_table_flags;
+ACPI_EXTERN u32                                 acpi_gbl_rsdt_table_count;
+ACPI_EXTERN struct rsdp_descriptor             *acpi_gbl_RSDP;
+ACPI_EXTERN XSDT_DESCRIPTOR            *acpi_gbl_XSDT;
+ACPI_EXTERN FADT_DESCRIPTOR            *acpi_gbl_FADT;
+ACPI_EXTERN struct acpi_table_header           *acpi_gbl_DSDT;
+ACPI_EXTERN FACS_DESCRIPTOR            *acpi_gbl_FACS;
+ACPI_EXTERN struct acpi_common_facs             acpi_gbl_common_fACS;
+/*
+ * Since there may be multiple SSDTs and PSDTS, a single pointer is not
+ * sufficient; Therefore, there isn't one!
+ */
+
+
+/*
+ * Handle both ACPI 1.0 and ACPI 2.0 Integer widths
+ * If we are running a method that exists in a 32-bit ACPI table.
+ * Use only 32 bits of the Integer for conversion.
+ */
+ACPI_EXTERN u8                                  acpi_gbl_integer_bit_width;
+ACPI_EXTERN u8                                  acpi_gbl_integer_byte_width;
+ACPI_EXTERN u8                                  acpi_gbl_integer_nybble_width;
+
+/*
+ * ACPI Table info arrays
+ */
+extern      struct acpi_table_list              acpi_gbl_table_lists[NUM_ACPI_TABLE_TYPES];
+extern      struct acpi_table_support           acpi_gbl_table_data[NUM_ACPI_TABLE_TYPES];
+
+/*
+ * Predefined mutex objects.  This array contains the
+ * actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs.
+ * (The table maps local handles to the real OS handles)
+ */
+ACPI_EXTERN struct acpi_mutex_info              acpi_gbl_mutex_info[NUM_MUTEX];
+
+
+/*****************************************************************************
+ *
+ * Miscellaneous globals
+ *
+ ****************************************************************************/
+
+
+ACPI_EXTERN struct acpi_memory_list             acpi_gbl_memory_lists[ACPI_NUM_MEM_LISTS];
+ACPI_EXTERN struct acpi_object_notify_handler   acpi_gbl_device_notify;
+ACPI_EXTERN struct acpi_object_notify_handler   acpi_gbl_system_notify;
+ACPI_EXTERN acpi_exception_handler              acpi_gbl_exception_handler;
+ACPI_EXTERN acpi_init_handler                   acpi_gbl_init_handler;
+ACPI_EXTERN struct acpi_walk_state             *acpi_gbl_breakpoint_walk;
+ACPI_EXTERN acpi_handle                         acpi_gbl_global_lock_semaphore;
+
+ACPI_EXTERN u32                                 acpi_gbl_global_lock_thread_count;
+ACPI_EXTERN u32                                 acpi_gbl_original_mode;
+ACPI_EXTERN u32                                 acpi_gbl_rsdp_original_location;
+ACPI_EXTERN u32                                 acpi_gbl_ns_lookup_count;
+ACPI_EXTERN u32                                 acpi_gbl_ps_find_count;
+ACPI_EXTERN u16                                 acpi_gbl_pm1_enable_register_save;
+ACPI_EXTERN u16                                 acpi_gbl_next_table_owner_id;
+ACPI_EXTERN u16                                 acpi_gbl_next_method_owner_id;
+ACPI_EXTERN u16                                 acpi_gbl_global_lock_handle;
+ACPI_EXTERN u8                                  acpi_gbl_debugger_configuration;
+ACPI_EXTERN u8                                  acpi_gbl_global_lock_acquired;
+ACPI_EXTERN u8                                  acpi_gbl_step_to_next_call;
+ACPI_EXTERN u8                                  acpi_gbl_acpi_hardware_present;
+ACPI_EXTERN u8                                  acpi_gbl_global_lock_present;
+ACPI_EXTERN u8                                  acpi_gbl_events_initialized;
+ACPI_EXTERN u8                                  acpi_gbl_system_awake_and_running;
+
+extern u8                                       acpi_gbl_shutdown;
+extern u32                                      acpi_gbl_startup_flags;
+extern const u8                                 acpi_gbl_decode_to8bit[8];
+extern const char                              *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT];
+extern const char                              *acpi_gbl_highest_dstate_names[4];
+extern const struct acpi_opcode_info            acpi_gbl_aml_op_info[AML_NUM_OPCODES];
+extern const char                              *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
+extern const char                              *acpi_gbl_valid_osi_strings[ACPI_NUM_OSI_STRINGS];
+
+
+/*****************************************************************************
+ *
+ * Namespace globals
+ *
+ ****************************************************************************/
+
+#define NUM_NS_TYPES                    ACPI_TYPE_INVALID+1
+
+#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
+#define NUM_PREDEFINED_NAMES            10
+#else
+#define NUM_PREDEFINED_NAMES            9
+#endif
+
+ACPI_EXTERN struct acpi_namespace_node          acpi_gbl_root_node_struct;
+ACPI_EXTERN struct acpi_namespace_node         *acpi_gbl_root_node;
+ACPI_EXTERN struct acpi_namespace_node         *acpi_gbl_fadt_gpe_device;
+
+extern const u8                                 acpi_gbl_ns_properties[NUM_NS_TYPES];
+extern const struct acpi_predefined_names       acpi_gbl_pre_defined_names [NUM_PREDEFINED_NAMES];
+
+#ifdef ACPI_DEBUG_OUTPUT
+ACPI_EXTERN u32                                 acpi_gbl_current_node_count;
+ACPI_EXTERN u32                                 acpi_gbl_current_node_size;
+ACPI_EXTERN u32                                 acpi_gbl_max_concurrent_node_count;
+ACPI_EXTERN acpi_size                           acpi_gbl_entry_stack_pointer;
+ACPI_EXTERN acpi_size                           acpi_gbl_lowest_stack_pointer;
+ACPI_EXTERN u32                                 acpi_gbl_deepest_nesting;
+#endif
+
+/*****************************************************************************
+ *
+ * Interpreter globals
+ *
+ ****************************************************************************/
+
+
+ACPI_EXTERN struct acpi_thread_state           *acpi_gbl_current_walk_list;
+
+/* Control method single step flag */
+
+ACPI_EXTERN u8                                  acpi_gbl_cm_single_step;
+
+
+/*****************************************************************************
+ *
+ * Parser globals
+ *
+ ****************************************************************************/
+
+ACPI_EXTERN union acpi_parse_object            *acpi_gbl_parsed_namespace_root;
+
+/*****************************************************************************
+ *
+ * Hardware globals
+ *
+ ****************************************************************************/
+
+extern      struct acpi_bit_register_info       acpi_gbl_bit_register_info[ACPI_NUM_BITREG];
+ACPI_EXTERN u8                                  acpi_gbl_sleep_type_a;
+ACPI_EXTERN u8                                  acpi_gbl_sleep_type_b;
+
+
+/*****************************************************************************
+ *
+ * Event and GPE globals
+ *
+ ****************************************************************************/
+
+extern      struct acpi_fixed_event_info        acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS];
+ACPI_EXTERN struct acpi_fixed_event_handler     acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS];
+ACPI_EXTERN struct acpi_gpe_xrupt_info         *acpi_gbl_gpe_xrupt_list_head;
+ACPI_EXTERN struct acpi_gpe_block_info         *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
+ACPI_EXTERN acpi_handle                         acpi_gbl_gpe_lock;
+
+
+/*****************************************************************************
+ *
+ * Debugger globals
+ *
+ ****************************************************************************/
+
+
+ACPI_EXTERN u8                                  acpi_gbl_db_output_flags;
+
+#ifdef ACPI_DISASSEMBLER
+
+ACPI_EXTERN u8                                  acpi_gbl_db_opt_disasm;
+ACPI_EXTERN u8                                  acpi_gbl_db_opt_verbose;
+#endif
+
+
+#ifdef ACPI_DEBUGGER
+
+extern      u8                                  acpi_gbl_method_executing;
+extern      u8                                  acpi_gbl_abort_method;
+extern      u8                                  acpi_gbl_db_terminate_threads;
+
+ACPI_EXTERN int                                 optind;
+ACPI_EXTERN char                               *optarg;
+
+ACPI_EXTERN u8                                  acpi_gbl_db_opt_tables;
+ACPI_EXTERN u8                                  acpi_gbl_db_opt_stats;
+ACPI_EXTERN u8                                  acpi_gbl_db_opt_ini_methods;
+
+
+ACPI_EXTERN char                               *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
+ACPI_EXTERN char                                acpi_gbl_db_line_buf[80];
+ACPI_EXTERN char                                acpi_gbl_db_parsed_buf[80];
+ACPI_EXTERN char                                acpi_gbl_db_scope_buf[40];
+ACPI_EXTERN char                                acpi_gbl_db_debug_filename[40];
+ACPI_EXTERN u8                                  acpi_gbl_db_output_to_file;
+ACPI_EXTERN char                               *acpi_gbl_db_buffer;
+ACPI_EXTERN char                               *acpi_gbl_db_filename;
+ACPI_EXTERN u32                                 acpi_gbl_db_debug_level;
+ACPI_EXTERN u32                                 acpi_gbl_db_console_debug_level;
+ACPI_EXTERN struct acpi_table_header           *acpi_gbl_db_table_ptr;
+ACPI_EXTERN struct acpi_namespace_node         *acpi_gbl_db_scope_node;
+
+/*
+ * Statistic globals
+ */
+ACPI_EXTERN u16                                 acpi_gbl_obj_type_count[ACPI_TYPE_NS_NODE_MAX+1];
+ACPI_EXTERN u16                                 acpi_gbl_node_type_count[ACPI_TYPE_NS_NODE_MAX+1];
+ACPI_EXTERN u16                                 acpi_gbl_obj_type_count_misc;
+ACPI_EXTERN u16                                 acpi_gbl_node_type_count_misc;
+ACPI_EXTERN u32                                 acpi_gbl_num_nodes;
+ACPI_EXTERN u32                                 acpi_gbl_num_objects;
+
+
+ACPI_EXTERN u32                                 acpi_gbl_size_of_parse_tree;
+ACPI_EXTERN u32                                 acpi_gbl_size_of_method_trees;
+ACPI_EXTERN u32                                 acpi_gbl_size_of_node_entries;
+ACPI_EXTERN u32                                 acpi_gbl_size_of_acpi_objects;
+
+#endif /* ACPI_DEBUGGER */
+
+
+#endif /* __ACGLOBAL_H__ */
diff --git a/include/acpi/achware.h b/include/acpi/achware.h
new file mode 100644
index 000000000000..28ad1398c159
--- /dev/null
+++ b/include/acpi/achware.h
@@ -0,0 +1,182 @@
+/******************************************************************************
+ *
+ * Name: achware.h -- hardware specific interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACHWARE_H__
+#define __ACHWARE_H__
+
+
+/* PM Timer ticks per second (HZ) */
+#define PM_TIMER_FREQUENCY  3579545
+
+
+/* Prototypes */
+
+
+acpi_status
+acpi_hw_initialize (
+	void);
+
+acpi_status
+acpi_hw_shutdown (
+	void);
+
+acpi_status
+acpi_hw_initialize_system_info (
+	void);
+
+acpi_status
+acpi_hw_set_mode (
+	u32                             mode);
+
+u32
+acpi_hw_get_mode (
+	void);
+
+u32
+acpi_hw_get_mode_capabilities (
+	void);
+
+/* Register I/O Prototypes */
+
+struct acpi_bit_register_info *
+acpi_hw_get_bit_register_info (
+	u32                             register_id);
+
+acpi_status
+acpi_hw_register_read (
+	u8                              use_lock,
+	u32                             register_id,
+	u32                             *return_value);
+
+acpi_status
+acpi_hw_register_write (
+	u8                              use_lock,
+	u32                             register_id,
+	u32                             value);
+
+acpi_status
+acpi_hw_low_level_read (
+	u32                             width,
+	u32                             *value,
+	struct acpi_generic_address     *reg);
+
+acpi_status
+acpi_hw_low_level_write (
+	u32                             width,
+	u32                             value,
+	struct acpi_generic_address     *reg);
+
+acpi_status
+acpi_hw_clear_acpi_status (
+	u32                             flags);
+
+
+/* GPE support */
+
+acpi_status
+acpi_hw_write_gpe_enable_reg (
+	struct acpi_gpe_event_info      *gpe_event_info);
+
+acpi_status
+acpi_hw_disable_gpe_block (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+acpi_status
+acpi_hw_clear_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info);
+
+acpi_status
+acpi_hw_clear_gpe_block (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_hw_get_gpe_status (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	acpi_event_status               *event_status);
+#endif
+
+acpi_status
+acpi_hw_disable_all_gpes (
+	u32                             flags);
+
+acpi_status
+acpi_hw_enable_all_runtime_gpes (
+	u32                             flags);
+
+acpi_status
+acpi_hw_enable_all_wakeup_gpes (
+	u32                             flags);
+
+acpi_status
+acpi_hw_enable_runtime_gpe_block (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+acpi_status
+acpi_hw_enable_wakeup_gpe_block (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+
+/* ACPI Timer prototypes */
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_timer_resolution (
+	u32                             *resolution);
+
+acpi_status
+acpi_get_timer (
+	u32                             *ticks);
+
+acpi_status
+acpi_get_timer_duration (
+	u32                             start_ticks,
+	u32                             end_ticks,
+	u32                             *time_elapsed);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+#endif /* __ACHWARE_H__ */
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
new file mode 100644
index 000000000000..c5301f5ffaf4
--- /dev/null
+++ b/include/acpi/acinterp.h
@@ -0,0 +1,765 @@
+/******************************************************************************
+ *
+ * Name: acinterp.h - Interpreter subcomponent prototypes and defines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACINTERP_H__
+#define __ACINTERP_H__
+
+
+#define ACPI_WALK_OPERANDS       (&(walk_state->operands [walk_state->num_operands -1]))
+
+
+acpi_status
+acpi_ex_resolve_operands (
+	u16                             opcode,
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_check_object_type (
+	acpi_object_type                type_needed,
+	acpi_object_type                this_type,
+	void                            *object);
+
+/*
+ * exxface - External interpreter interfaces
+ */
+
+acpi_status
+acpi_ex_load_table (
+	acpi_table_type                 table_id);
+
+acpi_status
+acpi_ex_execute_method (
+	struct acpi_namespace_node      *method_node,
+	union acpi_operand_object       **params,
+	union acpi_operand_object       **return_obj_desc);
+
+
+/*
+ * exconvrt - object conversion
+ */
+
+acpi_status
+acpi_ex_convert_to_integer (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc,
+	u32                             flags);
+
+acpi_status
+acpi_ex_convert_to_buffer (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc);
+
+acpi_status
+acpi_ex_convert_to_string (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc,
+	u32                             type);
+
+/* Types for ->String conversion */
+
+#define ACPI_EXPLICIT_BYTE_COPY         0x00000000
+#define ACPI_EXPLICIT_CONVERT_HEX       0x00000001
+#define ACPI_IMPLICIT_CONVERT_HEX       0x00000002
+#define ACPI_EXPLICIT_CONVERT_DECIMAL   0x00000003
+
+acpi_status
+acpi_ex_convert_to_target_type (
+	acpi_object_type                destination_type,
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       **result_desc,
+	struct acpi_walk_state          *walk_state);
+
+u32
+acpi_ex_convert_to_ascii (
+	acpi_integer                    integer,
+	u16                             base,
+	u8                              *string,
+	u8                              max_length);
+
+/*
+ * exfield - ACPI AML (p-code) execution - field manipulation
+ */
+
+acpi_status
+acpi_ex_common_buffer_setup (
+	union acpi_operand_object       *obj_desc,
+	u32                             buffer_length,
+	u32                             *datum_count);
+
+acpi_status
+acpi_ex_extract_from_field (
+	union acpi_operand_object       *obj_desc,
+	void                            *buffer,
+	u32                             buffer_length);
+
+acpi_status
+acpi_ex_insert_into_field (
+	union acpi_operand_object       *obj_desc,
+	void                            *buffer,
+	u32                             buffer_length);
+
+acpi_status
+acpi_ex_setup_region (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset);
+
+acpi_status
+acpi_ex_access_region (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset,
+	acpi_integer                    *value,
+	u32                             read_write);
+
+u8
+acpi_ex_register_overflow (
+	union acpi_operand_object       *obj_desc,
+	acpi_integer                    value);
+
+acpi_status
+acpi_ex_field_datum_io (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset,
+	acpi_integer                    *value,
+	u32                             read_write);
+
+acpi_status
+acpi_ex_write_with_update_rule (
+	union acpi_operand_object       *obj_desc,
+	acpi_integer                    mask,
+	acpi_integer                    field_value,
+	u32                             field_datum_byte_offset);
+
+void
+acpi_ex_get_buffer_datum(
+	acpi_integer                    *datum,
+	void                            *buffer,
+	u32                             buffer_length,
+	u32                             byte_granularity,
+	u32                             buffer_offset);
+
+void
+acpi_ex_set_buffer_datum (
+	acpi_integer                    merged_datum,
+	void                            *buffer,
+	u32                             buffer_length,
+	u32                             byte_granularity,
+	u32                             buffer_offset);
+
+acpi_status
+acpi_ex_read_data_from_field (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **ret_buffer_desc);
+
+acpi_status
+acpi_ex_write_data_to_field (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc);
+
+/*
+ * exmisc - ACPI AML (p-code) execution - specific opcodes
+ */
+
+acpi_status
+acpi_ex_opcode_3A_0T_0R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_3A_1T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_6A_0T_1R (
+	struct acpi_walk_state          *walk_state);
+
+u8
+acpi_ex_do_match (
+	u32                             match_op,
+	union acpi_operand_object       *package_obj,
+	union acpi_operand_object       *match_obj);
+
+acpi_status
+acpi_ex_get_object_reference (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **return_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_resolve_multiple (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *operand,
+	acpi_object_type                *return_type,
+	union acpi_operand_object       **return_desc);
+
+acpi_status
+acpi_ex_concat_template (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *obj_desc2,
+	union acpi_operand_object       **actual_return_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_do_concatenate (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *obj_desc2,
+	union acpi_operand_object       **actual_return_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_do_logical_numeric_op (
+	u16                             opcode,
+	acpi_integer                    integer0,
+	acpi_integer                    integer1,
+	u8                              *logical_result);
+
+acpi_status
+acpi_ex_do_logical_op (
+	u16                             opcode,
+	union acpi_operand_object       *operand0,
+	union acpi_operand_object       *operand1,
+	u8                              *logical_result);
+
+acpi_integer
+acpi_ex_do_math_op (
+	u16                             opcode,
+	acpi_integer                    operand0,
+	acpi_integer                    operand1);
+
+acpi_status
+acpi_ex_create_mutex (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_processor (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_power_resource (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_region (
+	u8                              *aml_start,
+	u32                             aml_length,
+	u8                              region_space,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_table_region (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_event (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_alias (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_create_method (
+	u8                              *aml_start,
+	u32                             aml_length,
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * exconfig - dynamic table load/unload
+ */
+
+acpi_status
+acpi_ex_add_table (
+	struct acpi_table_header        *table,
+	struct acpi_namespace_node      *parent_node,
+	union acpi_operand_object       **ddb_handle);
+
+acpi_status
+acpi_ex_load_op (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *target,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_load_table_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       **return_desc);
+
+acpi_status
+acpi_ex_unload_table (
+	union acpi_operand_object       *ddb_handle);
+
+
+/*
+ * exmutex - mutex support
+ */
+
+acpi_status
+acpi_ex_acquire_mutex (
+	union acpi_operand_object       *time_desc,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_release_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state);
+
+void
+acpi_ex_release_all_mutexes (
+	struct acpi_thread_state        *thread);
+
+void
+acpi_ex_unlink_mutex (
+	union acpi_operand_object       *obj_desc);
+
+void
+acpi_ex_link_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_thread_state        *thread);
+
+/*
+ * exprep - ACPI AML (p-code) execution - prep utilities
+ */
+
+acpi_status
+acpi_ex_prep_common_field_object (
+	union acpi_operand_object       *obj_desc,
+	u8                              field_flags,
+	u8                              field_attribute,
+	u32                             field_bit_position,
+	u32                             field_bit_length);
+
+acpi_status
+acpi_ex_prep_field_value (
+	struct acpi_create_field_info   *info);
+
+/*
+ * exsystem - Interface to OS services
+ */
+
+acpi_status
+acpi_ex_system_do_notify_op (
+	union acpi_operand_object       *value,
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_do_suspend(
+	acpi_integer                    time);
+
+acpi_status
+acpi_ex_system_do_stall (
+	u32                             time);
+
+acpi_status
+acpi_ex_system_acquire_mutex(
+	union acpi_operand_object       *time,
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_release_mutex(
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_signal_event(
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_wait_event(
+	union acpi_operand_object       *time,
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_reset_event(
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ex_system_wait_semaphore (
+	acpi_handle                     semaphore,
+	u16                             timeout);
+
+
+/*
+ * exmonadic - ACPI AML (p-code) execution, monadic operators
+ */
+
+acpi_status
+acpi_ex_opcode_0A_0T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_1A_0T_0R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_1A_0T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_1A_1T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_1A_1T_0R (
+	struct acpi_walk_state          *walk_state);
+
+/*
+ * exdyadic - ACPI AML (p-code) execution, dyadic operators
+ */
+
+acpi_status
+acpi_ex_opcode_2A_0T_0R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_2A_0T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_2A_1T_1R (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_opcode_2A_2T_1R (
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * exresolv  - Object resolution and get value functions
+ */
+
+acpi_status
+acpi_ex_resolve_to_value (
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_resolve_node_to_value (
+	struct acpi_namespace_node      **stack_ptr,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_resolve_object_to_value (
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * exdump - Interpreter debug output routines
+ */
+
+void
+acpi_ex_dump_operand (
+	union acpi_operand_object       *obj_desc,
+	u32                             depth);
+
+void
+acpi_ex_dump_operands (
+	union acpi_operand_object       **operands,
+	acpi_interpreter_mode           interpreter_mode,
+	char                            *ident,
+	u32                             num_levels,
+	char                            *note,
+	char                            *module_name,
+	u32                             line_number);
+
+#ifdef ACPI_FUTURE_USAGE
+void
+acpi_ex_dump_object_descriptor (
+	union acpi_operand_object       *object,
+	u32                             flags);
+
+void
+acpi_ex_dump_node (
+	struct acpi_namespace_node      *node,
+	u32                             flags);
+
+void
+acpi_ex_out_string (
+	char                            *title,
+	char                            *value);
+
+void
+acpi_ex_out_pointer (
+	char                            *title,
+	void                            *value);
+
+void
+acpi_ex_out_integer (
+	char                            *title,
+	u32                             value);
+
+void
+acpi_ex_out_address (
+	char                            *title,
+	acpi_physical_address           value);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+/*
+ * exnames - interpreter/scanner name load/execute
+ */
+
+char *
+acpi_ex_allocate_name_string (
+	u32                             prefix_count,
+	u32                             num_name_segs);
+
+u32
+acpi_ex_good_char (
+	u32                             character);
+
+acpi_status
+acpi_ex_name_segment (
+	u8                              **in_aml_address,
+	char                            *name_string);
+
+acpi_status
+acpi_ex_get_name_string (
+	acpi_object_type                data_type,
+	u8                              *in_aml_address,
+	char                            **out_name_string,
+	u32                             *out_name_length);
+
+acpi_status
+acpi_ex_do_name (
+	acpi_object_type                data_type,
+	acpi_interpreter_mode           load_exec_mode);
+
+
+/*
+ * exstore - Object store support
+ */
+
+acpi_status
+acpi_ex_store (
+	union acpi_operand_object       *val_desc,
+	union acpi_operand_object       *dest_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_store_object_to_index (
+	union acpi_operand_object       *val_desc,
+	union acpi_operand_object       *dest_desc,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_store_object_to_node (
+	union acpi_operand_object       *source_desc,
+	struct acpi_namespace_node      *node,
+	struct acpi_walk_state          *walk_state,
+	u8                              implicit_conversion);
+
+#define ACPI_IMPLICIT_CONVERSION        TRUE
+#define ACPI_NO_IMPLICIT_CONVERSION     FALSE
+
+/*
+ * exstoren
+ */
+
+acpi_status
+acpi_ex_resolve_object (
+	union acpi_operand_object       **source_desc_ptr,
+	acpi_object_type                target_type,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ex_store_object_to_object (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *dest_desc,
+	union acpi_operand_object       **new_desc,
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * excopy - object copy
+ */
+
+acpi_status
+acpi_ex_store_buffer_to_buffer (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc);
+
+acpi_status
+acpi_ex_store_string_to_string (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc);
+
+acpi_status
+acpi_ex_copy_integer_to_index_field (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc);
+
+acpi_status
+acpi_ex_copy_integer_to_bank_field (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc);
+
+acpi_status
+acpi_ex_copy_data_to_named_field (
+	union acpi_operand_object       *source_desc,
+	struct acpi_namespace_node      *node);
+
+acpi_status
+acpi_ex_copy_integer_to_buffer_field (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc);
+
+/*
+ * exutils - interpreter/scanner utilities
+ */
+
+acpi_status
+acpi_ex_enter_interpreter (
+	void);
+
+void
+acpi_ex_exit_interpreter (
+	void);
+
+void
+acpi_ex_truncate_for32bit_table (
+	union acpi_operand_object       *obj_desc);
+
+u8
+acpi_ex_acquire_global_lock (
+	u32                             rule);
+
+void
+acpi_ex_release_global_lock (
+	u8                              locked);
+
+u32
+acpi_ex_digits_needed (
+	acpi_integer                    value,
+	u32                             base);
+
+void
+acpi_ex_eisa_id_to_string (
+	u32                             numeric_id,
+	char                            *out_string);
+
+void
+acpi_ex_unsigned_integer_to_string (
+	acpi_integer                    value,
+	char                            *out_string);
+
+
+/*
+ * exregion - default op_region handlers
+ */
+
+acpi_status
+acpi_ex_system_memory_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_system_io_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_pci_config_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_cmos_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_pci_bar_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_embedded_controller_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+acpi_status
+acpi_ex_sm_bus_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+
+acpi_status
+acpi_ex_data_table_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context);
+
+#endif /* __INTERP_H__ */
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
new file mode 100644
index 000000000000..01d3b4bc0c85
--- /dev/null
+++ b/include/acpi/aclocal.h
@@ -0,0 +1,994 @@
+/******************************************************************************
+ *
+ * Name: aclocal.h - Internal data types used across the ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACLOCAL_H__
+#define __ACLOCAL_H__
+
+
+#define ACPI_WAIT_FOREVER               0xFFFF  /* u16, as per ACPI spec */
+
+typedef void *                                  acpi_mutex;
+typedef u32                                     acpi_mutex_handle;
+
+
+/* Total number of aml opcodes defined */
+
+#define AML_NUM_OPCODES                 0x7F
+
+
+/*****************************************************************************
+ *
+ * Mutex typedefs and structs
+ *
+ ****************************************************************************/
+
+
+/*
+ * Predefined handles for the mutex objects used within the subsystem
+ * All mutex objects are automatically created by acpi_ut_mutex_initialize.
+ *
+ * The acquire/release ordering protocol is implied via this list.  Mutexes
+ * with a lower value must be acquired before mutexes with a higher value.
+ *
+ * NOTE: any changes here must be reflected in the acpi_gbl_mutex_names table also!
+ */
+
+#define ACPI_MTX_EXECUTE                0
+#define ACPI_MTX_INTERPRETER            1
+#define ACPI_MTX_PARSER                 2
+#define ACPI_MTX_DISPATCHER             3
+#define ACPI_MTX_TABLES                 4
+#define ACPI_MTX_OP_REGIONS             5
+#define ACPI_MTX_NAMESPACE              6
+#define ACPI_MTX_EVENTS                 7
+#define ACPI_MTX_HARDWARE               8
+#define ACPI_MTX_CACHES                 9
+#define ACPI_MTX_MEMORY                 10
+#define ACPI_MTX_DEBUG_CMD_COMPLETE     11
+#define ACPI_MTX_DEBUG_CMD_READY        12
+
+#define MAX_MUTEX                       12
+#define NUM_MUTEX                       MAX_MUTEX+1
+
+
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+#ifdef DEFINE_ACPI_GLOBALS
+
+/* Names for the mutexes used in the subsystem */
+
+static char                         *acpi_gbl_mutex_names[] =
+{
+	"ACPI_MTX_Execute",
+	"ACPI_MTX_Interpreter",
+	"ACPI_MTX_Parser",
+	"ACPI_MTX_Dispatcher",
+	"ACPI_MTX_Tables",
+	"ACPI_MTX_op_regions",
+	"ACPI_MTX_Namespace",
+	"ACPI_MTX_Events",
+	"ACPI_MTX_Hardware",
+	"ACPI_MTX_Caches",
+	"ACPI_MTX_Memory",
+	"ACPI_MTX_debug_cmd_complete",
+	"ACPI_MTX_debug_cmd_ready",
+};
+
+#endif
+#endif
+
+
+/* Table for the global mutexes */
+
+struct acpi_mutex_info
+{
+	acpi_mutex                          mutex;
+	u32                                 use_count;
+	u32                                 owner_id;
+};
+
+/* This owner ID means that the mutex is not in use (unlocked) */
+
+#define ACPI_MUTEX_NOT_ACQUIRED         (u32) (-1)
+
+
+/* Lock flag parameter for various interfaces */
+
+#define ACPI_MTX_DO_NOT_LOCK            0
+#define ACPI_MTX_LOCK                   1
+
+
+typedef u16                                     acpi_owner_id;
+#define ACPI_OWNER_TYPE_TABLE           0x0
+#define ACPI_OWNER_TYPE_METHOD          0x1
+#define ACPI_FIRST_METHOD_ID            0x0001
+#define ACPI_FIRST_TABLE_ID             0xF000
+
+
+/* Field access granularities */
+
+#define ACPI_FIELD_BYTE_GRANULARITY     1
+#define ACPI_FIELD_WORD_GRANULARITY     2
+#define ACPI_FIELD_DWORD_GRANULARITY    4
+#define ACPI_FIELD_QWORD_GRANULARITY    8
+
+/*****************************************************************************
+ *
+ * Namespace typedefs and structs
+ *
+ ****************************************************************************/
+
+
+/* Operational modes of the AML interpreter/scanner */
+
+typedef enum
+{
+	ACPI_IMODE_LOAD_PASS1               = 0x01,
+	ACPI_IMODE_LOAD_PASS2               = 0x02,
+	ACPI_IMODE_EXECUTE                  = 0x0E
+
+} acpi_interpreter_mode;
+
+
+/*
+ * The Node describes a named object that appears in the AML
+ * An acpi_node is used to store Nodes.
+ *
+ * data_type is used to differentiate between internal descriptors, and MUST
+ * be the first byte in this structure.
+ */
+
+union acpi_name_union
+{
+	u32                                 integer;
+	char                                ascii[4];
+};
+
+struct acpi_namespace_node
+{
+	u8                                  descriptor;     /* Used to differentiate object descriptor types */
+	u8                                  type;           /* Type associated with this name */
+	u16                                 owner_id;
+	union acpi_name_union               name;           /* ACPI Name, always 4 chars per ACPI spec */
+	union acpi_operand_object           *object;        /* Pointer to attached ACPI object (optional) */
+	struct acpi_namespace_node          *child;         /* First child */
+	struct acpi_namespace_node          *peer;          /* Next peer*/
+	u16                                 reference_count; /* Current count of references and children */
+	u8                                  flags;
+};
+
+
+#define ACPI_ENTRY_NOT_FOUND            NULL
+
+
+/* Node flags */
+
+#define ANOBJ_RESERVED                  0x01
+#define ANOBJ_END_OF_PEER_LIST          0x02
+#define ANOBJ_DATA_WIDTH_32             0x04     /* Parent table is 64-bits */
+#define ANOBJ_METHOD_ARG                0x08
+#define ANOBJ_METHOD_LOCAL              0x10
+#define ANOBJ_METHOD_NO_RETVAL          0x20
+#define ANOBJ_METHOD_SOME_NO_RETVAL     0x40
+#define ANOBJ_IS_BIT_OFFSET             0x80
+
+/*
+ * ACPI Table Descriptor.  One per ACPI table
+ */
+struct acpi_table_desc
+{
+	struct acpi_table_desc          *prev;
+	struct acpi_table_desc          *next;
+	struct acpi_table_desc          *installed_desc;
+	struct acpi_table_header        *pointer;
+	u8                              *aml_start;
+	u64                             physical_address;
+	u32                             aml_length;
+	acpi_size                       length;
+	acpi_owner_id                   table_id;
+	u8                              type;
+	u8                              allocation;
+	u8                              loaded_into_namespace;
+};
+
+struct acpi_table_list
+{
+	struct acpi_table_desc          *next;
+	u32                             count;
+};
+
+
+struct acpi_find_context
+{
+	char                            *search_for;
+	acpi_handle                     *list;
+	u32                             *count;
+};
+
+
+struct acpi_ns_search_data
+{
+	struct acpi_namespace_node      *node;
+};
+
+
+/*
+ * Predefined Namespace items
+ */
+struct acpi_predefined_names
+{
+	char                            *name;
+	u8                              type;
+	char                            *val;
+};
+
+
+/* Object types used during package copies */
+
+
+#define ACPI_COPY_TYPE_SIMPLE           0
+#define ACPI_COPY_TYPE_PACKAGE          1
+
+/* Info structure used to convert external<->internal namestrings */
+
+struct acpi_namestring_info
+{
+	char                            *external_name;
+	char                            *next_external_char;
+	char                            *internal_name;
+	u32                             length;
+	u32                             num_segments;
+	u32                             num_carats;
+	u8                              fully_qualified;
+};
+
+
+/* Field creation info */
+
+struct acpi_create_field_info
+{
+	struct acpi_namespace_node      *region_node;
+	struct acpi_namespace_node      *field_node;
+	struct acpi_namespace_node      *register_node;
+	struct acpi_namespace_node      *data_register_node;
+	u32                             bank_value;
+	u32                             field_bit_position;
+	u32                             field_bit_length;
+	u8                              field_flags;
+	u8                              attribute;
+	u8                              field_type;
+};
+
+
+/*****************************************************************************
+ *
+ * Event typedefs and structs
+ *
+ ****************************************************************************/
+
+/* Dispatch info for each GPE -- either a method or handler, cannot be both */
+
+struct acpi_handler_info
+{
+	acpi_event_handler                      address;        /* Address of handler, if any */
+	void                                    *context;       /* Context to be passed to handler */
+	struct acpi_namespace_node              *method_node;   /* Method node for this GPE level (saved) */
+};
+
+union acpi_gpe_dispatch_info
+{
+	struct acpi_namespace_node              *method_node;   /* Method node for this GPE level */
+	struct acpi_handler_info                *handler;
+};
+
+/*
+ * Information about a GPE, one per each GPE in an array.
+ * NOTE: Important to keep this struct as small as possible.
+ */
+struct acpi_gpe_event_info
+{
+	union acpi_gpe_dispatch_info    dispatch;       /* Either Method or Handler */
+	struct acpi_gpe_register_info           *register_info; /* Backpointer to register info */
+	u8                                      flags;          /* Misc info about this GPE */
+	u8                                      register_bit;   /* This GPE bit within the register */
+};
+
+/* Information about a GPE register pair, one per each status/enable pair in an array */
+
+struct acpi_gpe_register_info
+{
+	struct acpi_generic_address             status_address; /* Address of status reg */
+	struct acpi_generic_address             enable_address; /* Address of enable reg */
+	u8                                      enable_for_wake; /* GPEs to keep enabled when sleeping */
+	u8                                      enable_for_run; /* GPEs to keep enabled when running */
+	u8                                      base_gpe_number; /* Base GPE number for this register */
+};
+
+/*
+ * Information about a GPE register block, one per each installed block --
+ * GPE0, GPE1, and one per each installed GPE Block Device.
+ */
+struct acpi_gpe_block_info
+{
+	struct acpi_namespace_node              *node;
+	struct acpi_gpe_block_info              *previous;
+	struct acpi_gpe_block_info              *next;
+	struct acpi_gpe_xrupt_info              *xrupt_block;   /* Backpointer to interrupt block */
+	struct acpi_gpe_register_info           *register_info; /* One per GPE register pair */
+	struct acpi_gpe_event_info              *event_info;    /* One for each GPE */
+	struct acpi_generic_address             block_address;  /* Base address of the block */
+	u32                                     register_count; /* Number of register pairs in block */
+	u8                                      block_base_number;/* Base GPE number for this block */
+};
+
+/* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */
+
+struct acpi_gpe_xrupt_info
+{
+	struct acpi_gpe_xrupt_info              *previous;
+	struct acpi_gpe_xrupt_info              *next;
+	struct acpi_gpe_block_info              *gpe_block_list_head; /* List of GPE blocks for this xrupt */
+	u32                                     interrupt_level;    /* System interrupt level */
+};
+
+
+struct acpi_gpe_walk_info
+{
+	struct acpi_namespace_node              *gpe_device;
+	struct acpi_gpe_block_info              *gpe_block;
+};
+
+
+typedef acpi_status (*ACPI_GPE_CALLBACK) (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
+
+/* Information about each particular fixed event */
+
+struct acpi_fixed_event_handler
+{
+	acpi_event_handler              handler;        /* Address of handler. */
+	void                            *context;       /* Context to be passed to handler */
+};
+
+struct acpi_fixed_event_info
+{
+	u8                              status_register_id;
+	u8                              enable_register_id;
+	u16                             status_bit_mask;
+	u16                             enable_bit_mask;
+};
+
+/* Information used during field processing */
+
+struct acpi_field_info
+{
+	u8                              skip_field;
+	u8                              field_flag;
+	u32                             pkg_length;
+};
+
+
+/*****************************************************************************
+ *
+ * Generic "state" object for stacks
+ *
+ ****************************************************************************/
+
+
+#define ACPI_CONTROL_NORMAL                  0xC0
+#define ACPI_CONTROL_CONDITIONAL_EXECUTING   0xC1
+#define ACPI_CONTROL_PREDICATE_EXECUTING     0xC2
+#define ACPI_CONTROL_PREDICATE_FALSE         0xC3
+#define ACPI_CONTROL_PREDICATE_TRUE          0xC4
+
+
+/* Forward declarations */
+struct acpi_walk_state        ;
+struct acpi_obj_mutex;
+union acpi_parse_object        ;
+
+
+#define ACPI_STATE_COMMON                  /* Two 32-bit fields and a pointer */\
+	u8                                  data_type;          /* To differentiate various internal objs */\
+	u8                                  flags;      \
+	u16                                 value;      \
+	u16                                 state;      \
+	u16                                 reserved;   \
+	void                                *next;      \
+
+struct acpi_common_state
+{
+	ACPI_STATE_COMMON
+};
+
+
+/*
+ * Update state - used to traverse complex objects such as packages
+ */
+struct acpi_update_state
+{
+	ACPI_STATE_COMMON
+	union acpi_operand_object           *object;
+};
+
+
+/*
+ * Pkg state - used to traverse nested package structures
+ */
+struct acpi_pkg_state
+{
+	ACPI_STATE_COMMON
+	union acpi_operand_object           *source_object;
+	union acpi_operand_object           *dest_object;
+	struct acpi_walk_state              *walk_state;
+	void                                *this_target_obj;
+	u32                                 num_packages;
+	u16                                 index;
+};
+
+
+/*
+ * Control state - one per if/else and while constructs.
+ * Allows nesting of these constructs
+ */
+struct acpi_control_state
+{
+	ACPI_STATE_COMMON
+	union acpi_parse_object             *predicate_op;
+	u8                                  *aml_predicate_start;   /* Start of if/while predicate */
+	u8                                  *package_end;           /* End of if/while block */
+	u16                                 opcode;
+};
+
+
+/*
+ * Scope state - current scope during namespace lookups
+ */
+struct acpi_scope_state
+{
+	ACPI_STATE_COMMON
+	struct acpi_namespace_node          *node;
+};
+
+
+struct acpi_pscope_state
+{
+	ACPI_STATE_COMMON
+	union acpi_parse_object             *op;                    /* Current op being parsed */
+	u8                                  *arg_end;               /* Current argument end */
+	u8                                  *pkg_end;               /* Current package end */
+	u32                                 arg_list;               /* Next argument to parse */
+	u32                                 arg_count;              /* Number of fixed arguments */
+};
+
+
+/*
+ * Thread state - one per thread across multiple walk states.  Multiple walk
+ * states are created when there are nested control methods executing.
+ */
+struct acpi_thread_state
+{
+	ACPI_STATE_COMMON
+	struct acpi_walk_state              *walk_state_list;       /* Head of list of walk_states for this thread */
+	union acpi_operand_object           *acquired_mutex_list;   /* List of all currently acquired mutexes */
+	u32                                 thread_id;              /* Running thread ID */
+	u8                                  current_sync_level;     /* Mutex Sync (nested acquire) level */
+};
+
+
+/*
+ * Result values - used to accumulate the results of nested
+ * AML arguments
+ */
+struct acpi_result_values
+{
+	ACPI_STATE_COMMON
+	union acpi_operand_object           *obj_desc [ACPI_OBJ_NUM_OPERANDS];
+	u8                                  num_results;
+	u8                                  last_insert;
+};
+
+
+typedef
+acpi_status (*acpi_parse_downwards) (
+	struct acpi_walk_state              *walk_state,
+	union acpi_parse_object             **out_op);
+
+typedef
+acpi_status (*acpi_parse_upwards) (
+	struct acpi_walk_state              *walk_state);
+
+
+/*
+ * Notify info - used to pass info to the deferred notify
+ * handler/dispatcher.
+ */
+struct acpi_notify_info
+{
+	ACPI_STATE_COMMON
+	struct acpi_namespace_node          *node;
+	union acpi_operand_object           *handler_obj;
+};
+
+
+/* Generic state is union of structs above */
+
+union acpi_generic_state
+{
+	struct acpi_common_state            common;
+	struct acpi_control_state           control;
+	struct acpi_update_state            update;
+	struct acpi_scope_state             scope;
+	struct acpi_pscope_state            parse_scope;
+	struct acpi_pkg_state               pkg;
+	struct acpi_thread_state            thread;
+	struct acpi_result_values           results;
+	struct acpi_notify_info             notify;
+};
+
+
+/*****************************************************************************
+ *
+ * Interpreter typedefs and structs
+ *
+ ****************************************************************************/
+
+typedef
+acpi_status (*ACPI_EXECUTE_OP) (
+	struct acpi_walk_state              *walk_state);
+
+
+/*****************************************************************************
+ *
+ * Parser typedefs and structs
+ *
+ ****************************************************************************/
+
+/*
+ * AML opcode, name, and argument layout
+ */
+struct acpi_opcode_info
+{
+#if defined(ACPI_DISASSEMBLER) || defined(ACPI_DEBUG_OUTPUT)
+	char                                *name;          /* Opcode name (disassembler/debug only) */
+#endif
+	u32                                 parse_args;     /* Grammar/Parse time arguments */
+	u32                                 runtime_args;   /* Interpret time arguments */
+	u32                                 flags;          /* Misc flags */
+	u8                                  object_type;    /* Corresponding internal object type */
+	u8                                  class;          /* Opcode class */
+	u8                                  type;           /* Opcode type */
+};
+
+
+union acpi_parse_value
+{
+	acpi_integer                        integer;        /* Integer constant (Up to 64 bits) */
+	struct uint64_struct                integer64;      /* Structure overlay for 2 32-bit Dwords */
+	u32                                 size;           /* bytelist or field size */
+	char                                *string;        /* NULL terminated string */
+	u8                                  *buffer;        /* buffer or string */
+	char                                *name;          /* NULL terminated string */
+	union acpi_parse_object             *arg;           /* arguments and contained ops */
+};
+
+
+#define ACPI_PARSE_COMMON \
+	u8                                  data_type;      /* To differentiate various internal objs */\
+	u8                                  flags;          /* Type of Op */\
+	u16                                 aml_opcode;     /* AML opcode */\
+	u32                                 aml_offset;     /* Offset of declaration in AML */\
+	union acpi_parse_object             *parent;        /* Parent op */\
+	union acpi_parse_object             *next;          /* Next op */\
+	ACPI_DISASM_ONLY_MEMBERS (\
+	u8                                  disasm_flags;   /* Used during AML disassembly */\
+	u8                                  disasm_opcode;  /* Subtype used for disassembly */\
+	char                                aml_op_name[16]) /* Op name (debug only) */\
+			   /* NON-DEBUG members below: */\
+	struct acpi_namespace_node          *node;          /* For use by interpreter */\
+	union acpi_parse_value              value;          /* Value or args associated with the opcode */\
+
+
+#define ACPI_DASM_BUFFER        0x00
+#define ACPI_DASM_RESOURCE      0x01
+#define ACPI_DASM_STRING        0x02
+#define ACPI_DASM_UNICODE       0x03
+#define ACPI_DASM_EISAID        0x04
+#define ACPI_DASM_MATCHOP       0x05
+
+/*
+ * generic operation (for example:  If, While, Store)
+ */
+struct acpi_parse_obj_common
+{
+	ACPI_PARSE_COMMON
+};
+
+
+/*
+ * Extended Op for named ops (Scope, Method, etc.), deferred ops (Methods and op_regions),
+ * and bytelists.
+ */
+struct acpi_parse_obj_named
+{
+	ACPI_PARSE_COMMON
+	u8                                  *path;
+	u8                                  *data;          /* AML body or bytelist data */
+	u32                                 length;         /* AML length */
+	u32                                 name;           /* 4-byte name or zero if no name */
+};
+
+
+/* The parse node is the fundamental element of the parse tree */
+
+struct acpi_parse_obj_asl
+{
+	ACPI_PARSE_COMMON
+	union acpi_parse_object             *child;
+	union acpi_parse_object             *parent_method;
+	char                                *filename;
+	char                                *external_name;
+	char                                *namepath;
+	char                                name_seg[4];
+	u32                                 extra_value;
+	u32                                 column;
+	u32                                 line_number;
+	u32                                 logical_line_number;
+	u32                                 logical_byte_offset;
+	u32                                 end_line;
+	u32                                 end_logical_line;
+	u32                                 acpi_btype;
+	u32                                 aml_length;
+	u32                                 aml_subtree_length;
+	u32                                 final_aml_length;
+	u32                                 final_aml_offset;
+	u32                                 compile_flags;
+	u16                                 parse_opcode;
+	u8                                  aml_opcode_length;
+	u8                                  aml_pkg_len_bytes;
+	u8                                  extra;
+	char                                parse_op_name[12];
+};
+
+
+union acpi_parse_object
+{
+	struct acpi_parse_obj_common        common;
+	struct acpi_parse_obj_named         named;
+	struct acpi_parse_obj_asl           asl;
+};
+
+
+/*
+ * Parse state - one state per parser invocation and each control
+ * method.
+ */
+struct acpi_parse_state
+{
+	u32                                 aml_size;
+	u8                                  *aml_start;     /* First AML byte */
+	u8                                  *aml;           /* Next AML byte */
+	u8                                  *aml_end;       /* (last + 1) AML byte */
+	u8                                  *pkg_start;     /* Current package begin */
+	u8                                  *pkg_end;       /* Current package end */
+	union acpi_parse_object             *start_op;      /* Root of parse tree */
+	struct acpi_namespace_node          *start_node;
+	union acpi_generic_state            *scope;         /* Current scope */
+	union acpi_parse_object             *start_scope;
+};
+
+
+/* Parse object flags */
+
+#define ACPI_PARSEOP_GENERIC                    0x01
+#define ACPI_PARSEOP_NAMED                      0x02
+#define ACPI_PARSEOP_DEFERRED                   0x04
+#define ACPI_PARSEOP_BYTELIST                   0x08
+#define ACPI_PARSEOP_IN_CACHE                   0x80
+
+/* Parse object disasm_flags */
+
+#define ACPI_PARSEOP_IGNORE                     0x01
+#define ACPI_PARSEOP_PARAMLIST                  0x02
+#define ACPI_PARSEOP_EMPTY_TERMLIST             0x04
+#define ACPI_PARSEOP_SPECIAL                    0x10
+
+
+/*****************************************************************************
+ *
+ * Hardware (ACPI registers) and PNP
+ *
+ ****************************************************************************/
+
+#define PCI_ROOT_HID_STRING         "PNP0A03"
+
+struct acpi_bit_register_info
+{
+	u8                                  parent_register;
+	u8                                  bit_position;
+	u16                                 access_bit_mask;
+};
+
+
+/*
+ * Register IDs
+ * These are the full ACPI registers
+ */
+#define ACPI_REGISTER_PM1_STATUS                0x01
+#define ACPI_REGISTER_PM1_ENABLE                0x02
+#define ACPI_REGISTER_PM1_CONTROL               0x03
+#define ACPI_REGISTER_PM1A_CONTROL              0x04
+#define ACPI_REGISTER_PM1B_CONTROL              0x05
+#define ACPI_REGISTER_PM2_CONTROL               0x06
+#define ACPI_REGISTER_PM_TIMER                  0x07
+#define ACPI_REGISTER_PROCESSOR_BLOCK           0x08
+#define ACPI_REGISTER_SMI_COMMAND_BLOCK         0x09
+
+
+/* Masks used to access the bit_registers */
+
+#define ACPI_BITMASK_TIMER_STATUS               0x0001
+#define ACPI_BITMASK_BUS_MASTER_STATUS          0x0010
+#define ACPI_BITMASK_GLOBAL_LOCK_STATUS         0x0020
+#define ACPI_BITMASK_POWER_BUTTON_STATUS        0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_STATUS        0x0200
+#define ACPI_BITMASK_RT_CLOCK_STATUS            0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_STATUS         0x4000    /* ACPI 3.0 */
+#define ACPI_BITMASK_WAKE_STATUS                0x8000
+
+#define ACPI_BITMASK_ALL_FIXED_STATUS           (ACPI_BITMASK_TIMER_STATUS          | \
+			 ACPI_BITMASK_BUS_MASTER_STATUS     | \
+			 ACPI_BITMASK_GLOBAL_LOCK_STATUS    | \
+			 ACPI_BITMASK_POWER_BUTTON_STATUS   | \
+			 ACPI_BITMASK_SLEEP_BUTTON_STATUS   | \
+			 ACPI_BITMASK_RT_CLOCK_STATUS       | \
+			 ACPI_BITMASK_WAKE_STATUS)
+
+#define ACPI_BITMASK_TIMER_ENABLE               0x0001
+#define ACPI_BITMASK_GLOBAL_LOCK_ENABLE         0x0020
+#define ACPI_BITMASK_POWER_BUTTON_ENABLE        0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_ENABLE        0x0200
+#define ACPI_BITMASK_RT_CLOCK_ENABLE            0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_DISABLE        0x4000    /* ACPI 3.0 */
+
+#define ACPI_BITMASK_SCI_ENABLE                 0x0001
+#define ACPI_BITMASK_BUS_MASTER_RLD             0x0002
+#define ACPI_BITMASK_GLOBAL_LOCK_RELEASE        0x0004
+#define ACPI_BITMASK_SLEEP_TYPE_X               0x1C00
+#define ACPI_BITMASK_SLEEP_ENABLE               0x2000
+
+#define ACPI_BITMASK_ARB_DISABLE                0x0001
+
+
+/* Raw bit position of each bit_register */
+
+#define ACPI_BITPOSITION_TIMER_STATUS           0x00
+#define ACPI_BITPOSITION_BUS_MASTER_STATUS      0x04
+#define ACPI_BITPOSITION_GLOBAL_LOCK_STATUS     0x05
+#define ACPI_BITPOSITION_POWER_BUTTON_STATUS    0x08
+#define ACPI_BITPOSITION_SLEEP_BUTTON_STATUS    0x09
+#define ACPI_BITPOSITION_RT_CLOCK_STATUS        0x0A
+#define ACPI_BITPOSITION_PCIEXP_WAKE_STATUS     0x0E    /* ACPI 3.0 */
+#define ACPI_BITPOSITION_WAKE_STATUS            0x0F
+
+#define ACPI_BITPOSITION_TIMER_ENABLE           0x00
+#define ACPI_BITPOSITION_GLOBAL_LOCK_ENABLE     0x05
+#define ACPI_BITPOSITION_POWER_BUTTON_ENABLE    0x08
+#define ACPI_BITPOSITION_SLEEP_BUTTON_ENABLE    0x09
+#define ACPI_BITPOSITION_RT_CLOCK_ENABLE        0x0A
+#define ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE    0x0E    /* ACPI 3.0 */
+
+#define ACPI_BITPOSITION_SCI_ENABLE             0x00
+#define ACPI_BITPOSITION_BUS_MASTER_RLD         0x01
+#define ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE    0x02
+#define ACPI_BITPOSITION_SLEEP_TYPE_X           0x0A
+#define ACPI_BITPOSITION_SLEEP_ENABLE           0x0D
+
+#define ACPI_BITPOSITION_ARB_DISABLE            0x00
+
+
+/*****************************************************************************
+ *
+ * Resource descriptors
+ *
+ ****************************************************************************/
+
+
+/* resource_type values */
+
+#define ACPI_RESOURCE_TYPE_MEMORY_RANGE         0
+#define ACPI_RESOURCE_TYPE_IO_RANGE             1
+#define ACPI_RESOURCE_TYPE_BUS_NUMBER_RANGE     2
+
+/* Resource descriptor types and masks */
+
+#define ACPI_RDESC_TYPE_LARGE                   0x80
+#define ACPI_RDESC_TYPE_SMALL                   0x00
+
+#define ACPI_RDESC_TYPE_MASK                    0x80
+#define ACPI_RDESC_SMALL_MASK                   0x78 /* Only bits 6:3 contain the type */
+
+
+/*
+ * Small resource descriptor types
+ * Note: The 3 length bits (2:0) must be zero
+ */
+#define ACPI_RDESC_TYPE_IRQ_FORMAT              0x20
+#define ACPI_RDESC_TYPE_DMA_FORMAT              0x28
+#define ACPI_RDESC_TYPE_START_DEPENDENT         0x30
+#define ACPI_RDESC_TYPE_END_DEPENDENT           0x38
+#define ACPI_RDESC_TYPE_IO_PORT                 0x40
+#define ACPI_RDESC_TYPE_FIXED_IO_PORT           0x48
+#define ACPI_RDESC_TYPE_SMALL_VENDOR            0x70
+#define ACPI_RDESC_TYPE_END_TAG                 0x78
+
+/*
+ * Large resource descriptor types
+ */
+#define ACPI_RDESC_TYPE_MEMORY_24               0x81
+#define ACPI_RDESC_TYPE_GENERAL_REGISTER        0x82
+#define ACPI_RDESC_TYPE_LARGE_VENDOR            0x84
+#define ACPI_RDESC_TYPE_MEMORY_32               0x85
+#define ACPI_RDESC_TYPE_FIXED_MEMORY_32         0x86
+#define ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE     0x87
+#define ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE      0x88
+#define ACPI_RDESC_TYPE_EXTENDED_XRUPT          0x89
+#define ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE     0x8A
+#define ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE  0x8B
+
+
+/*****************************************************************************
+ *
+ * Miscellaneous
+ *
+ ****************************************************************************/
+
+#define ACPI_ASCII_ZERO                      0x30
+
+
+/*****************************************************************************
+ *
+ * Debugger
+ *
+ ****************************************************************************/
+
+struct acpi_db_method_info
+{
+	acpi_handle                     thread_gate;
+	char                            *name;
+	char                            **args;
+	u32                             flags;
+	u32                             num_loops;
+	char                            pathname[128];
+};
+
+struct acpi_integrity_info
+{
+	u32                         nodes;
+	u32                         objects;
+};
+
+
+#define ACPI_DB_REDIRECTABLE_OUTPUT  0x01
+#define ACPI_DB_CONSOLE_OUTPUT       0x02
+#define ACPI_DB_DUPLICATE_OUTPUT     0x03
+
+
+/*****************************************************************************
+ *
+ * Debug
+ *
+ ****************************************************************************/
+
+struct acpi_debug_print_info
+{
+	u32                             component_id;
+	char                            *proc_name;
+	char                            *module_name;
+};
+
+
+/* Entry for a memory allocation (debug only) */
+
+#define ACPI_MEM_MALLOC                      0
+#define ACPI_MEM_CALLOC                      1
+#define ACPI_MAX_MODULE_NAME                 16
+
+#define ACPI_COMMON_DEBUG_MEM_HEADER \
+	struct acpi_debug_mem_block         *previous; \
+	struct acpi_debug_mem_block         *next; \
+	u32                                 size; \
+	u32                                 component; \
+	u32                                 line; \
+	char                                module[ACPI_MAX_MODULE_NAME]; \
+	u8                                  alloc_type;
+
+struct acpi_debug_mem_header
+{
+	ACPI_COMMON_DEBUG_MEM_HEADER
+};
+
+struct acpi_debug_mem_block
+{
+	ACPI_COMMON_DEBUG_MEM_HEADER
+	u64                                 user_space;
+};
+
+
+#define ACPI_MEM_LIST_GLOBAL            0
+#define ACPI_MEM_LIST_NSNODE            1
+
+#define ACPI_MEM_LIST_FIRST_CACHE_LIST  2
+#define ACPI_MEM_LIST_STATE             2
+#define ACPI_MEM_LIST_PSNODE            3
+#define ACPI_MEM_LIST_PSNODE_EXT        4
+#define ACPI_MEM_LIST_OPERAND           5
+#define ACPI_MEM_LIST_WALK              6
+#define ACPI_MEM_LIST_MAX               6
+#define ACPI_NUM_MEM_LISTS              7
+
+
+struct acpi_memory_list
+{
+	void                                *list_head;
+	u16                                 link_offset;
+	u16                                 max_cache_depth;
+	u16                                 cache_depth;
+	u16                                 object_size;
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+	/* Statistics for debug memory tracking only */
+
+	u32                                 total_allocated;
+	u32                                 total_freed;
+	u32                                 current_total_size;
+	u32                                 cache_requests;
+	u32                                 cache_hits;
+	char                                *list_name;
+#endif
+};
+
+
+#endif /* __ACLOCAL_H__ */
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
new file mode 100644
index 000000000000..fcaced16b16f
--- /dev/null
+++ b/include/acpi/acmacros.h
@@ -0,0 +1,678 @@
+/******************************************************************************
+ *
+ * Name: acmacros.h - C macros for the entire subsystem.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACMACROS_H__
+#define __ACMACROS_H__
+
+
+/*
+ * Data manipulation macros
+ */
+#define ACPI_LOWORD(l)                  ((u16)(u32)(l))
+#define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
+#define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
+#define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
+
+#define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
+#define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
+#define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
+
+
+#if ACPI_MACHINE_WIDTH == 16
+
+/*
+ * For 16-bit addresses, we have to assume that the upper 32 bits
+ * are zero.
+ */
+#define ACPI_LODWORD(l)                 ((u32)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(0))
+
+#define ACPI_GET_ADDRESS(a)             ((a).lo)
+#define ACPI_STORE_ADDRESS(a,b)         {(a).hi=0;(a).lo=(u32)(b);}
+#define ACPI_VALID_ADDRESS(a)           ((a).hi | (a).lo)
+
+#else
+#ifdef ACPI_NO_INTEGER64_SUPPORT
+/*
+ * acpi_integer is 32-bits, no 64-bit support on this platform
+ */
+#define ACPI_LODWORD(l)                 ((u32)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(0))
+
+#define ACPI_GET_ADDRESS(a)             (a)
+#define ACPI_STORE_ADDRESS(a,b)         ((a)=(b))
+#define ACPI_VALID_ADDRESS(a)           (a)
+
+#else
+
+/*
+ * Full 64-bit address/integer on both 32-bit and 64-bit platforms
+ */
+#define ACPI_LODWORD(l)                 ((u32)(u64)(l))
+#define ACPI_HIDWORD(l)                 ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
+
+#define ACPI_GET_ADDRESS(a)             (a)
+#define ACPI_STORE_ADDRESS(a,b)         ((a)=(acpi_physical_address)(b))
+#define ACPI_VALID_ADDRESS(a)           (a)
+#endif
+#endif
+
+/*
+ * printf() format helpers
+ */
+
+/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
+
+#define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
+
+/*
+ * Extract a byte of data using a pointer.  Any more than a byte and we
+ * get into potential aligment issues -- see the STORE macros below
+ */
+#define ACPI_GET8(addr)                 (*(u8*)(addr))
+
+/* Pointer arithmetic */
+
+#define ACPI_PTR_ADD(t,a,b)             (t *) (void *)((char *)(a) + (acpi_native_uint)(b))
+#define ACPI_PTR_DIFF(a,b)              (acpi_native_uint) ((char *)(a) - (char *)(b))
+
+/* Pointer/Integer type conversions */
+
+#define ACPI_TO_POINTER(i)              ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i)
+#define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
+#define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
+#define ACPI_FADT_OFFSET(f)             ACPI_OFFSET (FADT_DESCRIPTOR, f)
+
+#define ACPI_CAST_PTR(t, p)             ((t *)(void *)(p))
+#define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **)(void *)(p))
+
+#if ACPI_MACHINE_WIDTH == 16
+#define ACPI_STORE_POINTER(d,s)         ACPI_MOVE_32_TO_32(d,s)
+#define ACPI_PHYSADDR_TO_PTR(i)         (void *)(i)
+#define ACPI_PTR_TO_PHYSADDR(i)         (u32) (char *)(i)
+#else
+#define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
+#define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
+#endif
+
+/*
+ * Macros for moving data around to/from buffers that are possibly unaligned.
+ * If the hardware supports the transfer of unaligned data, just do the store.
+ * Otherwise, we have to move one byte at a time.
+ */
+#ifdef ACPI_BIG_ENDIAN
+/*
+ * Macros for big-endian machines
+ */
+
+/* This macro sets a buffer index, starting from the end of the buffer */
+
+#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
+
+/* These macros reverse the bytes during the move, converting little-endian to big endian */
+
+	 /* Big Endian      <==        Little Endian */
+	 /*  Hi...Lo                     Lo...Hi     */
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
+			  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
+					  ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+					  ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+							   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+							   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
+									  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
+									  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+									  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+
+#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+										   ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
+										   ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
+										   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+										   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+
+#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
+										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
+										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+#else
+/*
+ * Macros for little-endian machines
+ */
+
+/* This macro sets a buffer index, starting from the beginning of the buffer */
+
+#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
+
+#ifdef ACPI_MISALIGNED_TRANSFERS
+
+/* The hardware supports unaligned transfers, just do the little-endian move */
+
+#if ACPI_MACHINE_WIDTH == 16
+
+/* No 64-bit integers */
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_64(d,s)         ACPI_MOVE_16_TO_32(d,s)
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         ACPI_MOVE_32_TO_32(d,s)
+
+#else
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
+#endif
+
+#else
+/*
+ * The hardware does not support unaligned transfers.  We must move the
+ * data one byte at a time.  These macros work whether the source or
+ * the destination (or both) is/are unaligned.  (Little-endian move)
+ */
+
+/* 16-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
+
+#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
+#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
+
+/* 32-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+
+#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
+
+#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
+
+/* 64-bit source, 16/32/64 destination */
+
+#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)    /* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)    /* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
+										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
+										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
+										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
+										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
+										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
+										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
+#endif
+#endif
+
+/* Macros based on machine integer width */
+
+#if ACPI_MACHINE_WIDTH == 16
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_16_TO_16(d,s)
+
+#elif ACPI_MACHINE_WIDTH == 32
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
+
+#elif ACPI_MACHINE_WIDTH == 64
+#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
+
+#else
+#error unknown ACPI_MACHINE_WIDTH
+#endif
+
+
+/*
+ * Fast power-of-two math macros for non-optimized compilers
+ */
+#define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
+
+#define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
+#define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
+#define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
+
+#define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
+#define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
+#define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
+
+#define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
+#define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
+#define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
+
+#define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
+#define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
+#define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
+
+
+/*
+ * Rounding macros (Power of two boundaries only)
+ */
+#define ACPI_ROUND_DOWN(value,boundary)      (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_UP(value,boundary)        ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1)))
+
+#define ACPI_ROUND_DOWN_TO_32_BITS(a)        ACPI_ROUND_DOWN(a,4)
+#define ACPI_ROUND_DOWN_TO_64_BITS(a)        ACPI_ROUND_DOWN(a,8)
+#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)    ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY)
+
+#define ACPI_ROUND_UP_to_32_bITS(a)          ACPI_ROUND_UP(a,4)
+#define ACPI_ROUND_UP_to_64_bITS(a)          ACPI_ROUND_UP(a,8)
+#define ACPI_ROUND_UP_TO_NATIVE_WORD(a)      ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY)
+
+
+#define ACPI_ROUND_BITS_UP_TO_BYTES(a)       ACPI_DIV_8((a) + 7)
+#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)     ACPI_DIV_8((a))
+
+#define ACPI_ROUND_UP_TO_1K(a)               (((a) + 1023) >> 10)
+
+/* Generic (non-power-of-two) rounding */
+
+#define ACPI_ROUND_UP_TO(value,boundary)     (((value) + ((boundary)-1)) / (boundary))
+
+/*
+ * Bitmask creation
+ * Bit positions start at zero.
+ * MASK_BITS_ABOVE creates a mask starting AT the position and above
+ * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
+ */
+#define ACPI_MASK_BITS_ABOVE(position)       (~((ACPI_INTEGER_MAX) << ((u32) (position))))
+#define ACPI_MASK_BITS_BELOW(position)       ((ACPI_INTEGER_MAX) << ((u32) (position)))
+
+#define ACPI_IS_OCTAL_DIGIT(d)               (((char)(d) >= '0') && ((char)(d) <= '7'))
+
+
+/* Bitfields within ACPI registers */
+
+#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
+#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+
+/*
+ * An struct acpi_namespace_node * can appear in some contexts,
+ * where a pointer to an union acpi_operand_object    can also
+ * appear.  This macro is used to distinguish them.
+ *
+ * The "Descriptor" field is the first field in both structures.
+ */
+#define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->descriptor_id)
+#define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->descriptor_id = t)
+
+
+/* Macro to test the object type */
+
+#define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
+
+/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
+
+#define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
+
+/*
+ * Macros for the master AML opcode table
+ */
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
+#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#else
+#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#endif
+
+#ifdef ACPI_DISASSEMBLER
+#define ACPI_DISASM_ONLY_MEMBERS(a)     a;
+#else
+#define ACPI_DISASM_ONLY_MEMBERS(a)
+#endif
+
+#define ARG_TYPE_WIDTH                  5
+#define ARG_1(x)                        ((u32)(x))
+#define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
+#define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
+#define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
+#define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
+#define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
+
+#define ARGI_LIST1(a)                   (ARG_1(a))
+#define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
+#define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
+#define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
+#define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
+#define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
+
+#define ARGP_LIST1(a)                   (ARG_1(a))
+#define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
+#define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
+#define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
+#define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
+#define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
+
+#define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
+#define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
+
+
+/*
+ * Reporting macros that are never compiled out
+ */
+#define ACPI_PARAM_LIST(pl)                 pl
+
+/*
+ * Error reporting.  These versions add callers module and line#.  Since
+ * _THIS_MODULE gets compiled out when ACPI_DEBUG_OUTPUT isn't defined, only
+ * use it in debug mode.
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+#define ACPI_REPORT_INFO(fp)                {acpi_ut_report_info(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_ERROR(fp)               {acpi_ut_report_error(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_WARNING(fp)             {acpi_ut_report_warning(_THIS_MODULE,__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_NSERROR(s,e)            acpi_ns_report_error(_THIS_MODULE,__LINE__,_COMPONENT, s, e);
+
+#define ACPI_REPORT_METHOD_ERROR(s,n,p,e)   acpi_ns_report_method_error(_THIS_MODULE,__LINE__,_COMPONENT, s, n, p, e);
+
+#else
+
+#define ACPI_REPORT_INFO(fp)                {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_ERROR(fp)               {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_WARNING(fp)             {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define ACPI_REPORT_NSERROR(s,e)            acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e);
+
+#define ACPI_REPORT_METHOD_ERROR(s,n,p,e)   acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e);
+
+#endif
+
+/* Error reporting.  These versions pass thru the module and line# */
+
+#define _ACPI_REPORT_INFO(a,b,c,fp)         {acpi_ut_report_info(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define _ACPI_REPORT_ERROR(a,b,c,fp)        {acpi_ut_report_error(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+#define _ACPI_REPORT_WARNING(a,b,c,fp)      {acpi_ut_report_warning(a,b,c); \
+												acpi_os_printf ACPI_PARAM_LIST(fp);}
+
+/*
+ * Debug macros that are conditionally compiled
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+#define ACPI_MODULE_NAME(name)               static char ACPI_UNUSED_VAR *_THIS_MODULE = name;
+
+/*
+ * Function entry tracing.
+ * The first parameter should be the procedure name as a quoted string.  This is declared
+ * as a local string ("_proc_name) so that it can be also used by the function exit macros below.
+ */
+#define ACPI_FUNCTION_NAME(a)               struct acpi_debug_print_info _debug_info; \
+												_debug_info.component_id = _COMPONENT; \
+												_debug_info.proc_name  = a; \
+												_debug_info.module_name = _THIS_MODULE;
+
+#define ACPI_FUNCTION_TRACE(a)              ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace(__LINE__,&_debug_info)
+#define ACPI_FUNCTION_TRACE_PTR(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_ptr(__LINE__,&_debug_info,(void *)b)
+#define ACPI_FUNCTION_TRACE_U32(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_u32(__LINE__,&_debug_info,(u32)b)
+#define ACPI_FUNCTION_TRACE_STR(a,b)        ACPI_FUNCTION_NAME(a) \
+												acpi_ut_trace_str(__LINE__,&_debug_info,(char *)b)
+
+#define ACPI_FUNCTION_ENTRY()               acpi_ut_track_stack_ptr()
+
+/*
+ * Function exit tracing.
+ * WARNING: These macros include a return statement.  This is usually considered
+ * bad form, but having a separate exit macro is very ugly and difficult to maintain.
+ * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
+ * so that "_proc_name" is defined.
+ */
+#ifdef ACPI_USE_DO_WHILE_0
+#define ACPI_DO_WHILE0(a)               do a while(0)
+#else
+#define ACPI_DO_WHILE0(a)               a
+#endif
+
+#define return_VOID                     ACPI_DO_WHILE0 ({acpi_ut_exit(__LINE__,&_debug_info);return;})
+#define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({acpi_ut_status_exit(__LINE__,&_debug_info,(s));return((s));})
+#define return_VALUE(s)                 ACPI_DO_WHILE0 ({acpi_ut_value_exit(__LINE__,&_debug_info,(acpi_integer)(s));return((s));})
+#define return_PTR(s)                   ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(__LINE__,&_debug_info,(u8 *)(s));return((s));})
+
+/* Conditional execution */
+
+#define ACPI_DEBUG_EXEC(a)              a
+#define ACPI_NORMAL_EXEC(a)
+
+#define ACPI_DEBUG_DEFINE(a)            a;
+#define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
+#define _VERBOSE_STRUCTURES
+
+
+/* Stack and buffer dumping */
+
+#define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
+#define ACPI_DUMP_OPERANDS(a,b,c,d,e)   acpi_ex_dump_operands(a,b,c,d,e,_THIS_MODULE,__LINE__)
+
+
+#define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_DUMP_TABLES(a,b)           acpi_ns_dump_tables(a,b)
+#endif
+
+#define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
+#define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
+#define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
+#define ACPI_BREAK_MSG(a)               acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a))
+
+
+/*
+ * Generate INT3 on ACPI_ERROR (Debug only!)
+ */
+#define ACPI_ERROR_BREAK
+#ifdef  ACPI_ERROR_BREAK
+#define ACPI_BREAK_ON_ERROR(lvl)        if ((lvl)&ACPI_ERROR) \
+											acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
+#else
+#define ACPI_BREAK_ON_ERROR(lvl)
+#endif
+
+/*
+ * Master debug print macros
+ * Print iff:
+ *    1) Debug print for the current component is enabled
+ *    2) Debug error level or trace level for the print statement is enabled
+ */
+#define ACPI_DEBUG_PRINT(pl)            acpi_ut_debug_print ACPI_PARAM_LIST(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)        acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl)
+
+
+#else
+/*
+ * This is the non-debug case -- make everything go away,
+ * leaving no executable debug code!
+ */
+#define ACPI_MODULE_NAME(name)
+#define _THIS_MODULE ""
+
+#define ACPI_DEBUG_EXEC(a)
+#define ACPI_NORMAL_EXEC(a)             a;
+
+#define ACPI_DEBUG_DEFINE(a)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_NAME(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a,b)
+#define ACPI_FUNCTION_TRACE_U32(a,b)
+#define ACPI_FUNCTION_TRACE_STR(a,b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a,b,c,d,e)
+#define ACPI_DUMP_ENTRY(a,b)
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_DUMP_TABLES(a,b)
+#endif
+
+#define ACPI_DUMP_PATHNAME(a,b,c,d)
+#define ACPI_DUMP_RESOURCE_LIST(a)
+#define ACPI_DUMP_BUFFER(a,b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
+#define ACPI_BREAK_MSG(a)
+
+#define return_VOID                     return
+#define return_ACPI_STATUS(s)           return(s)
+#define return_VALUE(s)                 return(s)
+#define return_PTR(s)                   return(s)
+
+#endif
+
+/*
+ * Some code only gets executed when the debugger is built in.
+ * Note that this is entirely independent of whether the
+ * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
+ */
+#ifdef ACPI_DEBUGGER
+#define ACPI_DEBUGGER_EXEC(a)           a
+#else
+#define ACPI_DEBUGGER_EXEC(a)
+#endif
+
+
+/*
+ * For 16-bit code, we want to shrink some things even though
+ * we are using ACPI_DEBUG_OUTPUT to get the debug output
+ */
+#if ACPI_MACHINE_WIDTH == 16
+#undef ACPI_DEBUG_ONLY_MEMBERS
+#undef _VERBOSE_STRUCTURES
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#endif
+
+
+#ifdef ACPI_DEBUG_OUTPUT
+/*
+ * 1) Set name to blanks
+ * 2) Copy the object name
+ */
+#define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
+										ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
+#else
+
+#define ACPI_ADD_OBJECT_NAME(a,b)
+#endif
+
+
+/*
+ * Memory allocation tracking (DEBUG ONLY)
+ */
+#ifndef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Memory allocation */
+
+#define ACPI_MEM_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_CALLOCATE(a)           acpi_ut_callocate((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_FREE(a)                acpi_os_free(a)
+#define ACPI_MEM_TRACKING(a)
+
+
+#else
+
+/* Memory allocation */
+
+#define ACPI_MEM_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_CALLOCATE(a)           acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_THIS_MODULE,__LINE__)
+#define ACPI_MEM_TRACKING(a)            a
+
+#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
+
+#endif /* ACMACROS_H */
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
new file mode 100644
index 000000000000..8b3cdc3566b1
--- /dev/null
+++ b/include/acpi/acnamesp.h
@@ -0,0 +1,515 @@
+/******************************************************************************
+ *
+ * Name: acnamesp.h - Namespace subcomponent prototypes and defines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACNAMESP_H__
+#define __ACNAMESP_H__
+
+
+/* To search the entire name space, pass this as search_base */
+
+#define ACPI_NS_ALL                 ((acpi_handle)0)
+
+/*
+ * Elements of acpi_ns_properties are bit significant
+ * and should be one-to-one with values of acpi_object_type
+ */
+#define ACPI_NS_NORMAL              0
+#define ACPI_NS_NEWSCOPE            1   /* a definition of this type opens a name scope */
+#define ACPI_NS_LOCAL               2   /* suppress search of enclosing scopes */
+
+
+/* Definitions of the predefined namespace names  */
+
+#define ACPI_UNKNOWN_NAME           (u32) 0x3F3F3F3F     /* Unknown name is  "????" */
+#define ACPI_ROOT_NAME              (u32) 0x5F5F5F5C     /* Root name is     "\___" */
+#define ACPI_SYS_BUS_NAME           (u32) 0x5F53425F     /* Sys bus name is  "_SB_" */
+
+#define ACPI_NS_ROOT_PATH           "\\"
+#define ACPI_NS_SYSTEM_BUS          "_SB_"
+
+
+/* Flags for acpi_ns_lookup, acpi_ns_search_and_enter */
+
+#define ACPI_NS_NO_UPSEARCH         0
+#define ACPI_NS_SEARCH_PARENT       0x01
+#define ACPI_NS_DONT_OPEN_SCOPE     0x02
+#define ACPI_NS_NO_PEER_SEARCH      0x04
+#define ACPI_NS_ERROR_IF_FOUND      0x08
+
+#define ACPI_NS_WALK_UNLOCK         TRUE
+#define ACPI_NS_WALK_NO_UNLOCK      FALSE
+
+
+acpi_status
+acpi_ns_load_namespace (
+	void);
+
+acpi_status
+acpi_ns_initialize_objects (
+	void);
+
+acpi_status
+acpi_ns_initialize_devices (
+	void);
+
+
+/* Namespace init - nsxfinit */
+
+acpi_status
+acpi_ns_init_one_device (
+	acpi_handle                     obj_handle,
+	u32                             nesting_level,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_ns_init_one_object (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+
+acpi_status
+acpi_ns_walk_namespace (
+	acpi_object_type                type,
+	acpi_handle                     start_object,
+	u32                             max_depth,
+	u8                              unlock_before_callback,
+	acpi_walk_callback              user_function,
+	void                            *context,
+	void                            **return_value);
+
+struct acpi_namespace_node *
+acpi_ns_get_next_node (
+	acpi_object_type                type,
+	struct acpi_namespace_node      *parent,
+	struct acpi_namespace_node      *child);
+
+void
+acpi_ns_delete_namespace_by_owner (
+	u16                             table_id);
+
+
+/* Namespace loading - nsload */
+
+acpi_status
+acpi_ns_one_complete_parse (
+	u32                             pass_number,
+	struct acpi_table_desc          *table_desc);
+
+acpi_status
+acpi_ns_parse_table (
+	struct acpi_table_desc          *table_desc,
+	struct acpi_namespace_node      *scope);
+
+acpi_status
+acpi_ns_load_table (
+	struct acpi_table_desc          *table_desc,
+	struct acpi_namespace_node      *node);
+
+acpi_status
+acpi_ns_load_table_by_type (
+	acpi_table_type                 table_type);
+
+
+/*
+ * Top-level namespace access - nsaccess
+ */
+
+acpi_status
+acpi_ns_root_initialize (
+	void);
+
+acpi_status
+acpi_ns_lookup (
+	union acpi_generic_state        *scope_info,
+	char                            *name,
+	acpi_object_type                type,
+	acpi_interpreter_mode           interpreter_mode,
+	u32                             flags,
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      **ret_node);
+
+
+/*
+ * Named object allocation/deallocation - nsalloc
+ */
+
+struct acpi_namespace_node *
+acpi_ns_create_node (
+	u32                             name);
+
+void
+acpi_ns_delete_node (
+	struct acpi_namespace_node      *node);
+
+void
+acpi_ns_delete_namespace_subtree (
+	struct acpi_namespace_node      *parent_handle);
+
+void
+acpi_ns_detach_object (
+	struct acpi_namespace_node      *node);
+
+void
+acpi_ns_delete_children (
+	struct acpi_namespace_node      *parent);
+
+int
+acpi_ns_compare_names (
+	char                            *name1,
+	char                            *name2);
+
+void
+acpi_ns_remove_reference (
+	struct acpi_namespace_node      *node);
+
+
+/*
+ * Namespace modification - nsmodify
+ */
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ns_unload_namespace (
+	acpi_handle                     handle);
+
+acpi_status
+acpi_ns_delete_subtree (
+	acpi_handle                     start_handle);
+#endif
+
+
+/*
+ * Namespace dump/print utilities - nsdump
+ */
+
+#ifdef ACPI_FUTURE_USAGE
+void
+acpi_ns_dump_tables (
+	acpi_handle                     search_base,
+	u32                             max_depth);
+#endif
+
+void
+acpi_ns_dump_entry (
+	acpi_handle                     handle,
+	u32                             debug_level);
+
+void
+acpi_ns_dump_pathname (
+	acpi_handle                     handle,
+	char                            *msg,
+	u32                             level,
+	u32                             component);
+
+void
+acpi_ns_print_pathname (
+	u32                             num_segments,
+	char                            *pathname);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ns_dump_one_device (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+void
+acpi_ns_dump_root_devices (
+	void);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+acpi_status
+acpi_ns_dump_one_object (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *context,
+	void                            **return_value);
+
+#ifdef ACPI_FUTURE_USAGE
+void
+acpi_ns_dump_objects (
+	acpi_object_type                type,
+	u8                              display_type,
+	u32                             max_depth,
+	u32                             ownder_id,
+	acpi_handle                     start_handle);
+#endif
+
+
+/*
+ * Namespace evaluation functions - nseval
+ */
+
+acpi_status
+acpi_ns_evaluate_by_handle (
+	struct acpi_parameter_info      *info);
+
+acpi_status
+acpi_ns_evaluate_by_name (
+	char                            *pathname,
+	struct acpi_parameter_info      *info);
+
+acpi_status
+acpi_ns_evaluate_relative (
+	char                            *pathname,
+	struct acpi_parameter_info      *info);
+
+acpi_status
+acpi_ns_execute_control_method (
+	struct acpi_parameter_info      *info);
+
+acpi_status
+acpi_ns_get_object_value (
+	struct acpi_parameter_info      *info);
+
+
+/*
+ * Parent/Child/Peer utility functions
+ */
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_name
+acpi_ns_find_parent_name (
+	struct acpi_namespace_node      *node_to_search);
+#endif
+
+
+/*
+ * Name and Scope manipulation - nsnames
+ */
+
+u32
+acpi_ns_opens_scope (
+	acpi_object_type                type);
+
+void
+acpi_ns_build_external_path (
+	struct acpi_namespace_node      *node,
+	acpi_size                       size,
+	char                            *name_buffer);
+
+char *
+acpi_ns_get_external_pathname (
+	struct acpi_namespace_node      *node);
+
+char *
+acpi_ns_name_of_current_scope (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ns_handle_to_pathname (
+	acpi_handle                     target_handle,
+	struct acpi_buffer              *buffer);
+
+u8
+acpi_ns_pattern_match (
+	struct acpi_namespace_node      *obj_node,
+	char                            *search_for);
+
+acpi_status
+acpi_ns_get_node_by_path (
+	char                            *external_pathname,
+	struct acpi_namespace_node      *in_prefix_node,
+	u32                             flags,
+	struct acpi_namespace_node      **out_node);
+
+acpi_size
+acpi_ns_get_pathname_length (
+	struct acpi_namespace_node      *node);
+
+
+/*
+ * Object management for namespace nodes - nsobject
+ */
+
+acpi_status
+acpi_ns_attach_object (
+	struct acpi_namespace_node      *node,
+	union acpi_operand_object       *object,
+	acpi_object_type                type);
+
+union acpi_operand_object *
+acpi_ns_get_attached_object (
+	struct acpi_namespace_node      *node);
+
+union acpi_operand_object *
+acpi_ns_get_secondary_object (
+	union acpi_operand_object       *obj_desc);
+
+acpi_status
+acpi_ns_attach_data (
+	struct acpi_namespace_node      *node,
+	acpi_object_handler             handler,
+	void                            *data);
+
+acpi_status
+acpi_ns_detach_data (
+	struct acpi_namespace_node      *node,
+	acpi_object_handler             handler);
+
+acpi_status
+acpi_ns_get_attached_data (
+	struct acpi_namespace_node      *node,
+	acpi_object_handler             handler,
+	void                            **data);
+
+
+/*
+ * Namespace searching and entry - nssearch
+ */
+
+acpi_status
+acpi_ns_search_and_enter (
+	u32                             entry_name,
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      *node,
+	acpi_interpreter_mode           interpreter_mode,
+	acpi_object_type                type,
+	u32                             flags,
+	struct acpi_namespace_node      **ret_node);
+
+acpi_status
+acpi_ns_search_node (
+	u32                             entry_name,
+	struct acpi_namespace_node      *node,
+	acpi_object_type                type,
+	struct acpi_namespace_node      **ret_node);
+
+void
+acpi_ns_install_node (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_namespace_node      *parent_node,
+	struct acpi_namespace_node      *node,
+	acpi_object_type                type);
+
+
+/*
+ * Utility functions - nsutils
+ */
+
+u8
+acpi_ns_valid_root_prefix (
+	char                            prefix);
+
+u8
+acpi_ns_valid_path_separator (
+	char                            sep);
+
+acpi_object_type
+acpi_ns_get_type (
+	struct acpi_namespace_node      *node);
+
+u32
+acpi_ns_local (
+	acpi_object_type                type);
+
+void
+acpi_ns_report_error (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id,
+	char                            *internal_name,
+	acpi_status                     lookup_status);
+
+void
+acpi_ns_report_method_error (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id,
+	char                            *message,
+	struct acpi_namespace_node      *node,
+	char                            *path,
+	acpi_status                     lookup_status);
+
+void
+acpi_ns_print_node_pathname (
+	struct acpi_namespace_node      *node,
+	char                            *msg);
+
+acpi_status
+acpi_ns_build_internal_name (
+	struct acpi_namestring_info     *info);
+
+void
+acpi_ns_get_internal_name_length (
+	struct acpi_namestring_info     *info);
+
+acpi_status
+acpi_ns_internalize_name (
+	char                            *dotted_name,
+	char                            **converted_name);
+
+acpi_status
+acpi_ns_externalize_name (
+	u32                             internal_name_length,
+	char                            *internal_name,
+	u32                             *converted_name_length,
+	char                            **converted_name);
+
+struct acpi_namespace_node *
+acpi_ns_map_handle_to_node (
+	acpi_handle                     handle);
+
+acpi_handle
+acpi_ns_convert_entry_to_handle(
+	struct acpi_namespace_node      *node);
+
+void
+acpi_ns_terminate (
+	void);
+
+struct acpi_namespace_node *
+acpi_ns_get_parent_node (
+	struct acpi_namespace_node      *node);
+
+
+struct acpi_namespace_node *
+acpi_ns_get_next_valid_node (
+	struct acpi_namespace_node      *node);
+
+
+#endif /* __ACNAMESP_H__ */
diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h
new file mode 100644
index 000000000000..036023a940b2
--- /dev/null
+++ b/include/acpi/acobject.h
@@ -0,0 +1,501 @@
+
+/******************************************************************************
+ *
+ * Name: acobject.h - Definition of union acpi_operand_object    (Internal object only)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ACOBJECT_H
+#define _ACOBJECT_H
+
+
+/*
+ * The union acpi_operand_object    is used to pass AML operands from the dispatcher
+ * to the interpreter, and to keep track of the various handlers such as
+ * address space handlers and notify handlers.  The object is a constant
+ * size in order to allow it to be cached and reused.
+ */
+
+/*******************************************************************************
+ *
+ * Common Descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Common area for all objects.
+ *
+ * data_type is used to differentiate between internal descriptors, and MUST
+ * be the first byte in this structure.
+ */
+#define ACPI_OBJECT_COMMON_HEADER   /* SIZE/ALIGNMENT: 32 bits, one ptr plus trailing 8-bit flag */\
+	u8                                      descriptor;         /* To differentiate various internal objs */\
+	u8                                      type;               /* acpi_object_type */\
+	u16                                     reference_count;    /* For object deletion management */\
+	union acpi_operand_object               *next_object;       /* Objects linked to parent NS node */\
+	u8                                      flags; \
+
+/* Values for flag byte above */
+
+#define AOPOBJ_AML_CONSTANT         0x01
+#define AOPOBJ_STATIC_POINTER       0x02
+#define AOPOBJ_DATA_VALID           0x04
+#define AOPOBJ_OBJECT_INITIALIZED   0x08
+#define AOPOBJ_SETUP_COMPLETE       0x10
+#define AOPOBJ_SINGLE_DATUM         0x20
+
+
+/*
+ * Common bitfield for the field objects
+ * "Field Datum"  -- a datum from the actual field object
+ * "Buffer Datum" -- a datum from a user buffer, read from or to be written to the field
+ */
+#define ACPI_COMMON_FIELD_INFO      /* SIZE/ALIGNMENT: 24 bits + three 32-bit values */\
+	u8                                      field_flags;        /* Access, update, and lock bits */\
+	u8                                      attribute;          /* From access_as keyword */\
+	u8                                      access_byte_width;  /* Read/Write size in bytes */\
+	u32                                     bit_length;         /* Length of field in bits */\
+	u32                                     base_byte_offset;   /* Byte offset within containing object */\
+	u8                                      start_field_bit_offset;/* Bit offset within first field datum (0-63) */\
+	u8                                      access_bit_width;   /* Read/Write size in bits (8-64) */\
+	u32                                     value;              /* Value to store into the Bank or Index register */\
+	struct acpi_namespace_node              *node;              /* Link back to parent node */
+
+
+/*
+ * Fields common to both Strings and Buffers
+ */
+#define ACPI_COMMON_BUFFER_INFO \
+	u32                                     length;
+
+
+/*
+ * Common fields for objects that support ASL notifications
+ */
+#define ACPI_COMMON_NOTIFY_INFO \
+	union acpi_operand_object               *system_notify;     /* Handler for system notifies */\
+	union acpi_operand_object               *device_notify;     /* Handler for driver notifies */\
+	union acpi_operand_object               *handler;           /* Handler for Address space */
+
+
+/******************************************************************************
+ *
+ * Basic data types
+ *
+ *****************************************************************************/
+
+struct acpi_object_common
+{
+	ACPI_OBJECT_COMMON_HEADER
+};
+
+
+struct acpi_object_integer
+{
+	ACPI_OBJECT_COMMON_HEADER
+	acpi_integer                            value;
+};
+
+/*
+ * Note: The String and Buffer object must be identical through the Pointer
+ * element.  There is code that depends on this.
+ */
+struct acpi_object_string           /* Null terminated, ASCII characters only */
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_BUFFER_INFO
+	char                                    *pointer;           /* String in AML stream or allocated string */
+};
+
+
+struct acpi_object_buffer
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_BUFFER_INFO
+	u8                                      *pointer;           /* Buffer in AML stream or allocated buffer */
+	struct acpi_namespace_node              *node;              /* Link back to parent node */
+	u8                                      *aml_start;
+	u32                                     aml_length;
+};
+
+
+struct acpi_object_package
+{
+	ACPI_OBJECT_COMMON_HEADER
+
+	u32                                     count;              /* # of elements in package */
+	u32                                     aml_length;
+	u8                                      *aml_start;
+	struct acpi_namespace_node              *node;              /* Link back to parent node */
+	union acpi_operand_object               **elements;         /* Array of pointers to acpi_objects */
+};
+
+
+/******************************************************************************
+ *
+ * Complex data types
+ *
+ *****************************************************************************/
+
+struct acpi_object_event
+{
+	ACPI_OBJECT_COMMON_HEADER
+	void                                    *semaphore;
+};
+
+
+#define ACPI_INFINITE_CONCURRENCY   0xFF
+
+typedef
+acpi_status (*ACPI_INTERNAL_METHOD) (
+	struct acpi_walk_state          *walk_state);
+
+struct acpi_object_method
+{
+	ACPI_OBJECT_COMMON_HEADER
+	u8                                      method_flags;
+	u8                                      param_count;
+	u32                                     aml_length;
+	void                                    *semaphore;
+	u8                                      *aml_start;
+	ACPI_INTERNAL_METHOD            implementation;
+	u8                                      concurrency;
+	u8                                      thread_count;
+	acpi_owner_id                           owning_id;
+};
+
+
+struct acpi_object_mutex
+{
+	ACPI_OBJECT_COMMON_HEADER
+	u8                                      sync_level;         /* 0-15, specified in Mutex() call */
+	u16                                     acquisition_depth;  /* Allow multiple Acquires, same thread */
+	struct acpi_thread_state                *owner_thread;      /* Current owner of the mutex */
+	void                                    *semaphore;         /* Actual OS synchronization object */
+	union acpi_operand_object               *prev;              /* Link for list of acquired mutexes */
+	union acpi_operand_object               *next;              /* Link for list of acquired mutexes */
+	struct acpi_namespace_node              *node;              /* Containing namespace node */
+	u8                                      original_sync_level; /* Owner's original sync level (0-15) */
+};
+
+
+struct acpi_object_region
+{
+	ACPI_OBJECT_COMMON_HEADER
+
+	u8                                      space_id;
+	union acpi_operand_object               *handler;           /* Handler for region access */
+	struct acpi_namespace_node              *node;              /* Containing namespace node */
+	union acpi_operand_object               *next;
+	u32                                     length;
+	acpi_physical_address                   address;
+};
+
+
+/******************************************************************************
+ *
+ * Objects that can be notified.  All share a common notify_info area.
+ *
+ *****************************************************************************/
+
+struct acpi_object_notify_common            /* COMMON NOTIFY for POWER, PROCESSOR, DEVICE, and THERMAL */
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_NOTIFY_INFO
+};
+
+
+struct acpi_object_device
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_NOTIFY_INFO
+	struct acpi_gpe_block_info              *gpe_block;
+};
+
+
+struct acpi_object_power_resource
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_NOTIFY_INFO
+	u32                                     system_level;
+	u32                                     resource_order;
+};
+
+
+struct acpi_object_processor
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_NOTIFY_INFO
+	u32                                     proc_id;
+	u32                                     length;
+	acpi_io_address                         address;
+};
+
+
+struct acpi_object_thermal_zone
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_NOTIFY_INFO
+};
+
+
+/******************************************************************************
+ *
+ * Fields.  All share a common header/info field.
+ *
+ *****************************************************************************/
+
+struct acpi_object_field_common                         /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_FIELD_INFO
+	union acpi_operand_object               *region_obj;        /* Containing Operation Region object */
+			  /* (REGION/BANK fields only) */
+};
+
+
+struct acpi_object_region_field
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_FIELD_INFO
+	union acpi_operand_object               *region_obj;        /* Containing op_region object */
+};
+
+
+struct acpi_object_bank_field
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_FIELD_INFO
+	union acpi_operand_object               *region_obj;        /* Containing op_region object */
+	union acpi_operand_object               *bank_obj;          /* bank_select Register object */
+};
+
+
+struct acpi_object_index_field
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_FIELD_INFO
+
+	/*
+	 * No "region_obj" pointer needed since the Index and Data registers
+	 * are each field definitions unto themselves.
+	 */
+	union acpi_operand_object               *index_obj;         /* Index register */
+	union acpi_operand_object               *data_obj;          /* Data register */
+};
+
+
+/* The buffer_field is different in that it is part of a Buffer, not an op_region */
+
+struct acpi_object_buffer_field
+{
+	ACPI_OBJECT_COMMON_HEADER
+	ACPI_COMMON_FIELD_INFO
+	union acpi_operand_object               *buffer_obj;        /* Containing Buffer object */
+};
+
+
+/******************************************************************************
+ *
+ * Objects for handlers
+ *
+ *****************************************************************************/
+
+struct acpi_object_notify_handler
+{
+	ACPI_OBJECT_COMMON_HEADER
+	struct acpi_namespace_node              *node;              /* Parent device */
+	acpi_notify_handler                     handler;
+	void                                    *context;
+};
+
+
+/* Flags for address handler */
+
+#define ACPI_ADDR_HANDLER_DEFAULT_INSTALLED  0x1
+
+
+struct acpi_object_addr_handler
+{
+	ACPI_OBJECT_COMMON_HEADER
+	u8                                      space_id;
+	u16                                     hflags;
+	acpi_adr_space_handler                  handler;
+	struct acpi_namespace_node              *node;              /* Parent device */
+	void                                    *context;
+	acpi_adr_space_setup                    setup;
+	union acpi_operand_object               *region_list;       /* regions using this handler */
+	union acpi_operand_object               *next;
+};
+
+
+/******************************************************************************
+ *
+ * Special internal objects
+ *
+ *****************************************************************************/
+
+/*
+ * The Reference object type is used for these opcodes:
+ * Arg[0-6], Local[0-7], index_op, name_op, zero_op, one_op, ones_op, debug_op
+ */
+struct acpi_object_reference
+{
+	ACPI_OBJECT_COMMON_HEADER
+	u8                                      target_type;        /* Used for index_op */
+	u16                                     opcode;
+	u32                                     offset;             /* Used for arg_op, local_op, and index_op */
+	void                                    *object;            /* name_op=>HANDLE to obj, index_op=>union acpi_operand_object  */
+	struct acpi_namespace_node              *node;
+	union acpi_operand_object               **where;
+};
+
+
+/*
+ * Extra object is used as additional storage for types that
+ * have AML code in their declarations (term_args) that must be
+ * evaluated at run time.
+ *
+ * Currently: Region and field_unit types
+ */
+struct acpi_object_extra
+{
+	ACPI_OBJECT_COMMON_HEADER
+	u8                                      byte_fill1;
+	u16                                     word_fill1;
+	u32                                     aml_length;
+	u8                                      *aml_start;
+	struct acpi_namespace_node              *method_REG;        /* _REG method for this region (if any) */
+	void                                    *region_context;    /* Region-specific data */
+};
+
+
+/* Additional data that can be attached to namespace nodes */
+
+struct acpi_object_data
+{
+	ACPI_OBJECT_COMMON_HEADER
+	acpi_object_handler                     handler;
+	void                                    *pointer;
+};
+
+
+/* Structure used when objects are cached for reuse */
+
+struct acpi_object_cache_list
+{
+	ACPI_OBJECT_COMMON_HEADER
+	union acpi_operand_object               *next;              /* Link for object cache and internal lists*/
+};
+
+
+/******************************************************************************
+ *
+ * union acpi_operand_object Descriptor - a giant union of all of the above
+ *
+ *****************************************************************************/
+
+union acpi_operand_object
+{
+	struct acpi_object_common               common;
+	struct acpi_object_integer              integer;
+	struct acpi_object_string               string;
+	struct acpi_object_buffer               buffer;
+	struct acpi_object_package              package;
+	struct acpi_object_event                event;
+	struct acpi_object_method               method;
+	struct acpi_object_mutex                mutex;
+	struct acpi_object_region               region;
+	struct acpi_object_notify_common        common_notify;
+	struct acpi_object_device               device;
+	struct acpi_object_power_resource       power_resource;
+	struct acpi_object_processor            processor;
+	struct acpi_object_thermal_zone         thermal_zone;
+	struct acpi_object_field_common         common_field;
+	struct acpi_object_region_field         field;
+	struct acpi_object_buffer_field         buffer_field;
+	struct acpi_object_bank_field           bank_field;
+	struct acpi_object_index_field          index_field;
+	struct acpi_object_notify_handler       notify;
+	struct acpi_object_addr_handler         address_space;
+	struct acpi_object_reference            reference;
+	struct acpi_object_extra                extra;
+	struct acpi_object_data                 data;
+	struct acpi_object_cache_list           cache;
+};
+
+
+/******************************************************************************
+ *
+ * union acpi_descriptor - objects that share a common descriptor identifier
+ *
+ *****************************************************************************/
+
+
+/* Object descriptor types */
+
+#define ACPI_DESC_TYPE_CACHED           0x01        /* Used only when object is cached */
+#define ACPI_DESC_TYPE_STATE            0x02
+#define ACPI_DESC_TYPE_STATE_UPDATE     0x03
+#define ACPI_DESC_TYPE_STATE_PACKAGE    0x04
+#define ACPI_DESC_TYPE_STATE_CONTROL    0x05
+#define ACPI_DESC_TYPE_STATE_RPSCOPE    0x06
+#define ACPI_DESC_TYPE_STATE_PSCOPE     0x07
+#define ACPI_DESC_TYPE_STATE_WSCOPE     0x08
+#define ACPI_DESC_TYPE_STATE_RESULT     0x09
+#define ACPI_DESC_TYPE_STATE_NOTIFY     0x0A
+#define ACPI_DESC_TYPE_STATE_THREAD     0x0B
+#define ACPI_DESC_TYPE_WALK             0x0C
+#define ACPI_DESC_TYPE_PARSER           0x0D
+#define ACPI_DESC_TYPE_OPERAND          0x0E
+#define ACPI_DESC_TYPE_NAMED            0x0F
+#define ACPI_DESC_TYPE_MAX              0x0F
+
+
+union acpi_descriptor
+{
+	u8                                      descriptor_id;  /* To differentiate various internal objs */\
+	union acpi_operand_object               object;
+	struct acpi_namespace_node              node;
+	union acpi_parse_object                 op;
+};
+
+
+#endif /* _ACOBJECT_H */
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
new file mode 100644
index 000000000000..2fbe180fee6b
--- /dev/null
+++ b/include/acpi/acoutput.h
@@ -0,0 +1,185 @@
+/******************************************************************************
+ *
+ * Name: acoutput.h -- debug output
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACOUTPUT_H__
+#define __ACOUTPUT_H__
+
+/*
+ * Debug levels and component IDs.  These are used to control the
+ * granularity of the output of the DEBUG_PRINT macro -- on a per-
+ * component basis and a per-exception-type basis.
+ */
+
+/* Component IDs are used in the global "debug_layer" */
+
+#define ACPI_UTILITIES              0x00000001
+#define ACPI_HARDWARE               0x00000002
+#define ACPI_EVENTS                 0x00000004
+#define ACPI_TABLES                 0x00000008
+#define ACPI_NAMESPACE              0x00000010
+#define ACPI_PARSER                 0x00000020
+#define ACPI_DISPATCHER             0x00000040
+#define ACPI_EXECUTER               0x00000080
+#define ACPI_RESOURCES              0x00000100
+#define ACPI_CA_DEBUGGER            0x00000200
+#define ACPI_OS_SERVICES            0x00000400
+#define ACPI_CA_DISASSEMBLER        0x00000800
+
+/* Component IDs for ACPI tools and utilities */
+
+#define ACPI_COMPILER               0x00001000
+#define ACPI_TOOLS                  0x00002000
+
+#define ACPI_ALL_COMPONENTS         0x00003FFF
+#define ACPI_COMPONENT_DEFAULT      (ACPI_ALL_COMPONENTS)
+
+
+/* Component IDs reserved for ACPI drivers */
+
+#define ACPI_ALL_DRIVERS            0xFFFF0000
+
+
+/*
+ * Raw debug output levels, do not use these in the DEBUG_PRINT macros
+ */
+#define ACPI_LV_ERROR               0x00000001
+#define ACPI_LV_WARN                0x00000002
+#define ACPI_LV_INIT                0x00000004
+#define ACPI_LV_DEBUG_OBJECT        0x00000008
+#define ACPI_LV_INFO                0x00000010
+#define ACPI_LV_ALL_EXCEPTIONS      0x0000001F
+
+/* Trace verbosity level 1 [Standard Trace Level] */
+
+#define ACPI_LV_INIT_NAMES          0x00000020
+#define ACPI_LV_PARSE               0x00000040
+#define ACPI_LV_LOAD                0x00000080
+#define ACPI_LV_DISPATCH            0x00000100
+#define ACPI_LV_EXEC                0x00000200
+#define ACPI_LV_NAMES               0x00000400
+#define ACPI_LV_OPREGION            0x00000800
+#define ACPI_LV_BFIELD              0x00001000
+#define ACPI_LV_TABLES              0x00002000
+#define ACPI_LV_VALUES              0x00004000
+#define ACPI_LV_OBJECTS             0x00008000
+#define ACPI_LV_RESOURCES           0x00010000
+#define ACPI_LV_USER_REQUESTS       0x00020000
+#define ACPI_LV_PACKAGE             0x00040000
+#define ACPI_LV_VERBOSITY1          0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS
+
+/* Trace verbosity level 2 [Function tracing and memory allocation] */
+
+#define ACPI_LV_ALLOCATIONS         0x00100000
+#define ACPI_LV_FUNCTIONS           0x00200000
+#define ACPI_LV_OPTIMIZATIONS       0x00400000
+#define ACPI_LV_VERBOSITY2          0x00700000 | ACPI_LV_VERBOSITY1
+#define ACPI_LV_ALL                 ACPI_LV_VERBOSITY2
+
+/* Trace verbosity level 3 [Threading, I/O, and Interrupts] */
+
+#define ACPI_LV_MUTEX               0x01000000
+#define ACPI_LV_THREADS             0x02000000
+#define ACPI_LV_IO                  0x04000000
+#define ACPI_LV_INTERRUPTS          0x08000000
+#define ACPI_LV_VERBOSITY3          0x0F000000 | ACPI_LV_VERBOSITY2
+
+/* Exceptionally verbose output -- also used in the global "debug_level" */
+
+#define ACPI_LV_AML_DISASSEMBLE     0x10000000
+#define ACPI_LV_VERBOSE_INFO        0x20000000
+#define ACPI_LV_FULL_TABLES         0x40000000
+#define ACPI_LV_EVENTS              0x80000000
+
+#define ACPI_LV_VERBOSE             0xF0000000
+
+
+/*
+ * Debug level macros that are used in the DEBUG_PRINT macros
+ */
+#define ACPI_DEBUG_LEVEL(dl)        (u32) dl,__LINE__,&_debug_info
+
+/* Exception level -- used in the global "debug_level" */
+
+#define ACPI_DB_ERROR               ACPI_DEBUG_LEVEL (ACPI_LV_ERROR)
+#define ACPI_DB_WARN                ACPI_DEBUG_LEVEL (ACPI_LV_WARN)
+#define ACPI_DB_INIT                ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
+#define ACPI_DB_DEBUG_OBJECT        ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DB_INFO                ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
+#define ACPI_DB_ALL_EXCEPTIONS      ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
+
+
+/* Trace level -- also used in the global "debug_level" */
+
+#define ACPI_DB_INIT_NAMES          ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
+#define ACPI_DB_THREADS             ACPI_DEBUG_LEVEL (ACPI_LV_THREADS)
+#define ACPI_DB_PARSE               ACPI_DEBUG_LEVEL (ACPI_LV_PARSE)
+#define ACPI_DB_DISPATCH            ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH)
+#define ACPI_DB_LOAD                ACPI_DEBUG_LEVEL (ACPI_LV_LOAD)
+#define ACPI_DB_EXEC                ACPI_DEBUG_LEVEL (ACPI_LV_EXEC)
+#define ACPI_DB_NAMES               ACPI_DEBUG_LEVEL (ACPI_LV_NAMES)
+#define ACPI_DB_OPREGION            ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION)
+#define ACPI_DB_BFIELD              ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD)
+#define ACPI_DB_TABLES              ACPI_DEBUG_LEVEL (ACPI_LV_TABLES)
+#define ACPI_DB_FUNCTIONS           ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS)
+#define ACPI_DB_OPTIMIZATIONS       ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS)
+#define ACPI_DB_VALUES              ACPI_DEBUG_LEVEL (ACPI_LV_VALUES)
+#define ACPI_DB_OBJECTS             ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS)
+#define ACPI_DB_ALLOCATIONS         ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS)
+#define ACPI_DB_RESOURCES           ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES)
+#define ACPI_DB_IO                  ACPI_DEBUG_LEVEL (ACPI_LV_IO)
+#define ACPI_DB_INTERRUPTS          ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS)
+#define ACPI_DB_USER_REQUESTS       ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
+#define ACPI_DB_PACKAGE             ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
+#define ACPI_DB_MUTEX               ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
+
+#define ACPI_DB_ALL                 ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
+
+
+/* Defaults for debug_level, debug and normal */
+
+#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
+
+
+#endif /* __ACOUTPUT_H__ */
diff --git a/include/acpi/acparser.h b/include/acpi/acparser.h
new file mode 100644
index 000000000000..c0395ef2b0d0
--- /dev/null
+++ b/include/acpi/acparser.h
@@ -0,0 +1,351 @@
+/******************************************************************************
+ *
+ * Module Name: acparser.h - AML Parser subcomponent prototypes and defines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#ifndef __ACPARSER_H__
+#define __ACPARSER_H__
+
+
+#define OP_HAS_RETURN_VALUE             1
+
+/* variable # arguments */
+
+#define ACPI_VAR_ARGS                   ACPI_UINT32_MAX
+
+
+#define ACPI_PARSE_DELETE_TREE          0x0001
+#define ACPI_PARSE_NO_TREE_DELETE       0x0000
+#define ACPI_PARSE_TREE_MASK            0x0001
+
+#define ACPI_PARSE_LOAD_PASS1           0x0010
+#define ACPI_PARSE_LOAD_PASS2           0x0020
+#define ACPI_PARSE_EXECUTE              0x0030
+#define ACPI_PARSE_MODE_MASK            0x0030
+
+#define ACPI_PARSE_DEFERRED_OP          0x0100
+
+/* Parser external interfaces */
+
+acpi_status
+acpi_psx_load_table (
+	u8                              *pcode_addr,
+	u32                             pcode_length);
+
+acpi_status
+acpi_psx_execute (
+	struct acpi_parameter_info      *info);
+
+
+/******************************************************************************
+ *
+ * Parser interfaces
+ *
+ *****************************************************************************/
+
+
+/* psargs - Parse AML opcode arguments */
+
+u8 *
+acpi_ps_get_next_package_end (
+	struct acpi_parse_state         *parser_state);
+
+u32
+acpi_ps_get_next_package_length (
+	struct acpi_parse_state         *parser_state);
+
+char *
+acpi_ps_get_next_namestring (
+	struct acpi_parse_state         *parser_state);
+
+void
+acpi_ps_get_next_simple_arg (
+	struct acpi_parse_state         *parser_state,
+	u32                             arg_type,
+	union acpi_parse_object         *arg);
+
+acpi_status
+acpi_ps_get_next_namepath (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_parse_state         *parser_state,
+	union acpi_parse_object         *arg,
+	u8                              method_call);
+
+union acpi_parse_object *
+acpi_ps_get_next_field (
+	struct acpi_parse_state         *parser_state);
+
+acpi_status
+acpi_ps_get_next_arg (
+	struct acpi_walk_state          *walk_state,
+	struct acpi_parse_state         *parser_state,
+	u32                             arg_type,
+	union acpi_parse_object         **return_arg);
+
+
+/* psfind */
+
+union acpi_parse_object *
+acpi_ps_find_name (
+	union acpi_parse_object         *scope,
+	u32                             name,
+	u32                             opcode);
+
+union acpi_parse_object*
+acpi_ps_get_parent (
+	union acpi_parse_object         *op);
+
+
+/* psopcode - AML Opcode information */
+
+const struct acpi_opcode_info *
+acpi_ps_get_opcode_info (
+	u16                             opcode);
+
+char *
+acpi_ps_get_opcode_name (
+	u16                             opcode);
+
+
+/* psparse - top level parsing routines */
+
+u32
+acpi_ps_get_opcode_size (
+	u32                             opcode);
+
+void
+acpi_ps_complete_this_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op);
+
+acpi_status
+acpi_ps_next_parse_state (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	acpi_status                     callback_status);
+
+acpi_status
+acpi_ps_find_object (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op);
+
+void
+acpi_ps_delete_parse_tree (
+	union acpi_parse_object         *root);
+
+acpi_status
+acpi_ps_parse_loop (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ps_parse_aml (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ps_parse_table (
+	u8                              *aml,
+	u32                             aml_size,
+	acpi_parse_downwards            descending_callback,
+	acpi_parse_upwards              ascending_callback,
+	union acpi_parse_object         **root_object);
+
+u16
+acpi_ps_peek_opcode (
+	struct acpi_parse_state         *state);
+
+
+/* psscope - Scope stack management routines */
+
+
+acpi_status
+acpi_ps_init_scope (
+	struct acpi_parse_state         *parser_state,
+	union acpi_parse_object         *root);
+
+union acpi_parse_object *
+acpi_ps_get_parent_scope (
+	struct acpi_parse_state         *state);
+
+u8
+acpi_ps_has_completed_scope (
+	struct acpi_parse_state         *parser_state);
+
+void
+acpi_ps_pop_scope (
+	struct acpi_parse_state         *parser_state,
+	union acpi_parse_object         **op,
+	u32                             *arg_list,
+	u32                             *arg_count);
+
+acpi_status
+acpi_ps_push_scope (
+	struct acpi_parse_state         *parser_state,
+	union acpi_parse_object         *op,
+	u32                             remaining_args,
+	u32                             arg_count);
+
+void
+acpi_ps_cleanup_scope (
+	struct acpi_parse_state         *state);
+
+
+/* pstree - parse tree manipulation routines */
+
+void
+acpi_ps_append_arg(
+	union acpi_parse_object         *op,
+	union acpi_parse_object         *arg);
+
+union acpi_parse_object*
+acpi_ps_find (
+	union acpi_parse_object         *scope,
+	char                            *path,
+	u16                             opcode,
+	u32                             create);
+
+union acpi_parse_object *
+acpi_ps_get_arg(
+	union acpi_parse_object         *op,
+	u32                              argn);
+
+#ifdef ACPI_FUTURE_USAGE
+union acpi_parse_object *
+acpi_ps_get_child (
+	union acpi_parse_object         *op);
+
+union acpi_parse_object *
+acpi_ps_get_depth_next (
+	union acpi_parse_object         *origin,
+	union acpi_parse_object         *op);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/* pswalk - parse tree walk routines */
+
+acpi_status
+acpi_ps_walk_parsed_aml (
+	union acpi_parse_object         *start_op,
+	union acpi_parse_object         *end_op,
+	union acpi_operand_object       *mth_desc,
+	struct acpi_namespace_node      *start_node,
+	union acpi_operand_object       **params,
+	union acpi_operand_object       **caller_return_desc,
+	acpi_owner_id                   owner_id,
+	acpi_parse_downwards            descending_callback,
+	acpi_parse_upwards              ascending_callback);
+
+acpi_status
+acpi_ps_get_next_walk_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         *op,
+	acpi_parse_upwards              ascending_callback);
+
+acpi_status
+acpi_ps_delete_completed_op (
+	struct acpi_walk_state          *walk_state);
+
+
+/* psutils - parser utilities */
+
+union acpi_parse_object *
+acpi_ps_create_scope_op (
+	void);
+
+void
+acpi_ps_init_op (
+	union acpi_parse_object         *op,
+	u16                             opcode);
+
+union acpi_parse_object *
+acpi_ps_alloc_op (
+	u16                             opcode);
+
+void
+acpi_ps_free_op (
+	union acpi_parse_object         *op);
+
+#ifdef ACPI_ENABLE_OBJECT_CACHE
+void
+acpi_ps_delete_parse_cache (
+	void);
+#endif
+
+u8
+acpi_ps_is_leading_char (
+	u32                             c);
+
+u8
+acpi_ps_is_prefix_char (
+	u32                             c);
+
+#ifdef ACPI_FUTURE_USAGE
+u32
+acpi_ps_get_name(
+	union acpi_parse_object         *op);
+#endif
+
+void
+acpi_ps_set_name(
+	union acpi_parse_object         *op,
+	u32                             name);
+
+
+/* psdump - display parser tree */
+
+u32
+acpi_ps_sprint_path (
+	char                            *buffer_start,
+	u32                             buffer_size,
+	union acpi_parse_object         *op);
+
+u32
+acpi_ps_sprint_op (
+	char                            *buffer_start,
+	u32                             buffer_size,
+	union acpi_parse_object         *op);
+
+void
+acpi_ps_show (
+	union acpi_parse_object         *op);
+
+
+#endif /* __ACPARSER_H__ */
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
new file mode 100644
index 000000000000..ad53252dd42d
--- /dev/null
+++ b/include/acpi/acpi.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ * Name: acpi.h - Master include file, Publics and external data.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACPI_H__
+#define __ACPI_H__
+
+/*
+ * Common includes for all ACPI driver files
+ * We put them here because we don't want to duplicate them
+ * in the rest of the source code again and again.
+ */
+#include "acconfig.h"           /* Configuration constants */
+#include "platform/acenv.h"     /* Target environment specific items */
+#include "actypes.h"            /* Fundamental common data types */
+#include "acexcep.h"            /* ACPI exception codes */
+#include "acmacros.h"           /* C macros */
+#include "actbl.h"              /* ACPI table definitions */
+#include "aclocal.h"            /* Internal data types */
+#include "acoutput.h"           /* Error output and Debug macros */
+#include "acpiosxf.h"           /* Interfaces to the ACPI-to-OS layer*/
+#include "acpixf.h"             /* ACPI core subsystem external interfaces */
+#include "acobject.h"           /* ACPI internal object */
+#include "acstruct.h"           /* Common structures */
+#include "acglobal.h"           /* All global variables */
+#include "achware.h"            /* Hardware defines and interfaces */
+#include "acutils.h"            /* Utility interfaces */
+
+
+#endif /* __ACPI_H__ */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
new file mode 100644
index 000000000000..c627bc408a6b
--- /dev/null
+++ b/include/acpi/acpi_bus.h
@@ -0,0 +1,341 @@
+/*
+ *  acpi_bus.h - ACPI Bus Driver ($Revision: 22 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __ACPI_BUS_H__
+#define __ACPI_BUS_H__
+
+#include <linux/kobject.h>
+
+#include <acpi/acpi.h>
+
+#define PREFIX			"ACPI: "
+
+/* TBD: Make dynamic */
+#define ACPI_MAX_HANDLES	10
+struct acpi_handle_list {
+	u32			count;
+	acpi_handle		handles[ACPI_MAX_HANDLES];
+};
+
+
+/* acpi_utils.h */
+acpi_status
+acpi_extract_package (
+	union acpi_object       *package,
+	struct acpi_buffer      *format,
+	struct acpi_buffer      *buffer);
+acpi_status
+acpi_evaluate_integer (
+	acpi_handle             handle,
+	acpi_string             pathname,
+	struct acpi_object_list *arguments,
+	unsigned long           *data);
+acpi_status
+acpi_evaluate_reference (
+	acpi_handle             handle,
+	acpi_string             pathname,
+	struct acpi_object_list *arguments,
+	struct acpi_handle_list *list);
+
+
+#ifdef CONFIG_ACPI_BUS
+
+#include <linux/proc_fs.h>
+
+#define ACPI_BUS_FILE_ROOT	"acpi"
+extern struct proc_dir_entry	*acpi_root_dir;
+extern FADT_DESCRIPTOR		acpi_fadt;
+
+enum acpi_bus_removal_type {
+	ACPI_BUS_REMOVAL_NORMAL	= 0,
+	ACPI_BUS_REMOVAL_EJECT,
+	ACPI_BUS_REMOVAL_SUPRISE,
+	ACPI_BUS_REMOVAL_TYPE_COUNT
+};
+
+enum acpi_bus_device_type {
+	ACPI_BUS_TYPE_DEVICE	= 0,
+	ACPI_BUS_TYPE_POWER,
+	ACPI_BUS_TYPE_PROCESSOR,
+	ACPI_BUS_TYPE_THERMAL,
+	ACPI_BUS_TYPE_SYSTEM,
+	ACPI_BUS_TYPE_POWER_BUTTON,
+	ACPI_BUS_TYPE_SLEEP_BUTTON,
+	ACPI_BUS_DEVICE_TYPE_COUNT
+};
+
+struct acpi_driver;
+struct acpi_device;
+
+
+/*
+ * ACPI Driver
+ * -----------
+ */
+
+typedef int (*acpi_op_add)	(struct acpi_device *device);
+typedef int (*acpi_op_remove)	(struct acpi_device *device, int type);
+typedef int (*acpi_op_lock)	(struct acpi_device *device, int type);
+typedef int (*acpi_op_start)	(struct acpi_device *device);
+typedef int (*acpi_op_stop)	(struct acpi_device *device, int type);
+typedef int (*acpi_op_suspend)	(struct acpi_device *device, int state);
+typedef int (*acpi_op_resume)	(struct acpi_device *device, int state);
+typedef int (*acpi_op_scan)	(struct acpi_device *device);
+typedef int (*acpi_op_bind)	(struct acpi_device *device);
+typedef int (*acpi_op_unbind)	(struct acpi_device *device);
+typedef int (*acpi_op_match)	(struct acpi_device *device,
+				 struct acpi_driver *driver);
+
+struct acpi_device_ops {
+	acpi_op_add		add;
+	acpi_op_remove		remove;
+	acpi_op_lock		lock;
+	acpi_op_start		start;
+	acpi_op_stop		stop;
+	acpi_op_suspend		suspend;
+	acpi_op_resume		resume;
+	acpi_op_scan		scan;
+	acpi_op_bind		bind;
+	acpi_op_unbind		unbind;
+	acpi_op_match		match;
+};
+
+struct acpi_driver {
+	struct list_head	node;
+	char			name[80];
+	char			class[80];
+	atomic_t		references;
+	char			*ids;		/* Supported Hardware IDs */
+	struct acpi_device_ops	ops;
+};
+
+/*
+ * ACPI Device
+ * -----------
+ */
+
+/* Status (_STA) */
+
+struct acpi_device_status {
+	u32			present:1;
+	u32			enabled:1;
+	u32			show_in_ui:1;
+	u32			functional:1;
+	u32			battery_present:1;
+	u32			reserved:27;
+};
+
+
+/* Flags */
+
+struct acpi_device_flags {
+	u32			dynamic_status:1;
+	u32			hardware_id:1;
+	u32			compatible_ids:1;
+	u32			bus_address:1;
+	u32			unique_id:1;
+	u32			removable:1;
+	u32			ejectable:1;
+	u32			lockable:1;
+	u32			suprise_removal_ok:1;
+	u32			power_manageable:1;
+	u32			performance_manageable:1;
+	u32			wake_capable:1; /* Wakeup(_PRW) supported? */
+	u32			reserved:20;
+};
+
+
+/* File System */
+
+struct acpi_device_dir {
+	struct proc_dir_entry	*entry;
+};
+
+#define acpi_device_dir(d)	((d)->dir.entry)
+
+
+/* Plug and Play */
+
+typedef char			acpi_bus_id[5];
+typedef unsigned long		acpi_bus_address;
+typedef char			acpi_hardware_id[9];
+typedef char			acpi_unique_id[9];
+typedef char			acpi_device_name[40];
+typedef char			acpi_device_class[20];
+
+struct acpi_device_pnp {
+	acpi_bus_id		bus_id;		               /* Object name */
+	acpi_bus_address	bus_address;	                      /* _ADR */
+	acpi_hardware_id	hardware_id;	                      /* _HID */
+	struct acpi_compatible_id_list *cid_list;		     /* _CIDs */
+	acpi_unique_id		unique_id;	                      /* _UID */
+	acpi_device_name	device_name;	         /* Driver-determined */
+	acpi_device_class	device_class;	         /*        "          */
+};
+
+#define acpi_device_bid(d)	((d)->pnp.bus_id)
+#define acpi_device_adr(d)	((d)->pnp.bus_address)
+#define acpi_device_hid(d)	((d)->pnp.hardware_id)
+#define acpi_device_uid(d)	((d)->pnp.unique_id)
+#define acpi_device_name(d)	((d)->pnp.device_name)
+#define acpi_device_class(d)	((d)->pnp.device_class)
+
+
+/* Power Management */
+
+struct acpi_device_power_flags {
+	u32			explicit_get:1;		     /* _PSC present? */
+	u32			power_resources:1;	   /* Power resources */
+	u32			inrush_current:1;	  /* Serialize Dx->D0 */
+	u32			power_removed:1;	   /* Optimize Dx->D0 */
+	u32			reserved:28;
+};
+
+struct acpi_device_power_state {
+	struct {
+		u8			valid:1;	
+		u8			explicit_set:1;	     /* _PSx present? */
+		u8			reserved:6;
+	}			flags;
+	int			power;		  /* % Power (compared to D0) */
+	int			latency;	/* Dx->D0 time (microseconds) */
+	struct acpi_handle_list	resources;	/* Power resources referenced */
+};
+
+struct acpi_device_power {
+	int			state;		             /* Current state */
+	struct acpi_device_power_flags flags;
+	struct acpi_device_power_state states[4];     /* Power states (D0-D3) */
+};
+
+
+/* Performance Management */
+
+struct acpi_device_perf_flags {
+	u8			reserved:8;
+};
+
+struct acpi_device_perf_state {
+	struct {
+		u8			valid:1;	
+		u8			reserved:7;
+	}			flags;
+	u8			power;		  /* % Power (compared to P0) */
+	u8			performance;	  /* % Performance (    "   ) */
+	int			latency;	/* Px->P0 time (microseconds) */
+};
+
+struct acpi_device_perf {
+	int			state;
+	struct acpi_device_perf_flags flags;
+	int			state_count;
+	struct acpi_device_perf_state *states;
+};
+
+/* Wakeup Management */
+struct acpi_device_wakeup_flags {
+	u8	valid:1; /* Can successfully enable wakeup? */
+	u8	run_wake:1; /* Run-Wake GPE devices */
+};
+
+struct acpi_device_wakeup_state {
+	u8	enabled:1;
+	u8	active:1;
+};
+
+struct acpi_device_wakeup {
+	acpi_handle		gpe_device;
+	acpi_integer		gpe_number;;
+	acpi_integer		sleep_state;
+	struct acpi_handle_list	resources;
+	struct acpi_device_wakeup_state	state;
+	struct acpi_device_wakeup_flags	flags;
+};
+
+/* Device */
+
+struct acpi_device {
+	acpi_handle		handle;
+	struct acpi_device	*parent;
+	struct list_head	children;
+	struct list_head	node;
+	struct list_head	wakeup_list;
+	struct list_head	g_list;
+	struct acpi_device_status status;
+	struct acpi_device_flags flags;
+	struct acpi_device_pnp	pnp;
+	struct acpi_device_power power;
+	struct acpi_device_wakeup wakeup;
+	struct acpi_device_perf	performance;
+	struct acpi_device_dir	dir;
+	struct acpi_device_ops	ops;
+	struct acpi_driver	*driver;
+	void			*driver_data;
+	struct kobject		kobj;
+};
+
+#define acpi_driver_data(d)	((d)->driver_data)
+
+
+/*
+ * Events
+ * ------
+ */
+
+struct acpi_bus_event {
+	struct list_head	node;
+	acpi_device_class	device_class;
+	acpi_bus_id		bus_id;
+	u32			type;
+	u32			data;
+};
+
+extern struct subsystem acpi_subsys;
+
+/*
+ * External Functions
+ */
+
+int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
+void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context);
+int acpi_bus_get_status (struct acpi_device *device);
+int acpi_bus_get_power (acpi_handle handle, int *state);
+int acpi_bus_set_power (acpi_handle handle, int state);
+int acpi_bus_generate_event (struct acpi_device *device, u8 type, int data);
+int acpi_bus_receive_event (struct acpi_bus_event *event);
+int acpi_bus_register_driver (struct acpi_driver *driver);
+int acpi_bus_unregister_driver (struct acpi_driver *driver);
+int acpi_bus_scan (struct acpi_device *start);
+int acpi_bus_add (struct acpi_device **child, struct acpi_device *parent,
+		acpi_handle handle, int type);
+
+
+int acpi_match_ids (struct acpi_device	*device, char	*ids);
+int acpi_create_dir(struct acpi_device *);
+void acpi_remove_dir(struct acpi_device *);
+
+#endif /*CONFIG_ACPI_BUS*/
+
+#endif /*__ACPI_BUS_H__*/
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
new file mode 100644
index 000000000000..c62e92ec43b2
--- /dev/null
+++ b/include/acpi/acpi_drivers.h
@@ -0,0 +1,112 @@
+/*
+ *  acpi_drivers.h  ($Revision: 31 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __ACPI_DRIVERS_H__
+#define __ACPI_DRIVERS_H__
+
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+
+
+#define ACPI_MAX_STRING			80
+
+#define ACPI_BUS_COMPONENT		0x00010000
+#define ACPI_SYSTEM_COMPONENT		0x02000000
+
+/* _HID definitions */
+
+#define ACPI_POWER_HID			"ACPI_PWR"
+#define ACPI_PROCESSOR_HID		"ACPI_CPU"
+#define ACPI_SYSTEM_HID			"ACPI_SYS"
+#define ACPI_THERMAL_HID		"ACPI_THM"
+#define ACPI_BUTTON_HID_POWERF		"ACPI_FPB"
+#define ACPI_BUTTON_HID_SLEEPF		"ACPI_FSB"
+
+
+/* --------------------------------------------------------------------------
+                                       PCI
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_PCI
+
+#define ACPI_PCI_COMPONENT		0x00400000
+
+/* ACPI PCI Interrupt Link (pci_link.c) */
+
+int acpi_irq_penalty_init (void);
+int acpi_pci_link_get_irq (acpi_handle handle, int index, int *edge_level,
+	int *active_high_low, char **name);
+
+/* ACPI PCI Interrupt Routing (pci_irq.c) */
+
+int acpi_pci_irq_add_prt (acpi_handle handle, int segment, int bus);
+void acpi_pci_irq_del_prt (int segment, int bus);
+
+/* ACPI PCI Device Binding (pci_bind.c) */
+
+struct pci_bus;
+
+int acpi_pci_bind (struct acpi_device *device);
+int acpi_pci_unbind (struct acpi_device *device);
+int acpi_pci_bind_root (struct acpi_device *device, struct acpi_pci_id *id, struct pci_bus *bus);
+
+/* Arch-defined function to add a bus to the system */
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, int bus);
+
+#endif /*CONFIG_ACPI_PCI*/
+
+
+/* --------------------------------------------------------------------------
+                                  Power Resource
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_POWER
+int acpi_enable_wakeup_device_power (struct acpi_device *dev);
+int acpi_disable_wakeup_device_power (struct acpi_device *dev);
+int acpi_power_get_inferred_state (struct acpi_device *device);
+int acpi_power_transition (struct acpi_device *device, int state);
+#endif
+
+
+/* --------------------------------------------------------------------------
+                                  Embedded Controller
+   -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_EC
+int acpi_ec_ecdt_probe (void);
+#endif
+
+/* --------------------------------------------------------------------------
+                                    Processor
+   -------------------------------------------------------------------------- */
+
+#define ACPI_PROCESSOR_LIMIT_NONE	0x00
+#define ACPI_PROCESSOR_LIMIT_INCREMENT	0x01
+#define ACPI_PROCESSOR_LIMIT_DECREMENT	0x02
+
+int acpi_processor_set_thermal_limit(acpi_handle handle, int type);
+
+
+#endif /*__ACPI_DRIVERS_H__*/
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
new file mode 100644
index 000000000000..857c8072eb1e
--- /dev/null
+++ b/include/acpi/acpiosxf.h
@@ -0,0 +1,389 @@
+
+/******************************************************************************
+ *
+ * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL).  These
+ *                    interfaces must be implemented by OSL to interface the
+ *                    ACPI components to the host operating system.
+ *
+ *****************************************************************************/
+
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACPIOSXF_H__
+#define __ACPIOSXF_H__
+
+#include "platform/acenv.h"
+#include "actypes.h"
+
+
+/* Priorities for acpi_os_queue_for_execution */
+
+#define OSD_PRIORITY_GPE            1
+#define OSD_PRIORITY_HIGH           2
+#define OSD_PRIORITY_MED            3
+#define OSD_PRIORITY_LO             4
+
+#define ACPI_NO_UNIT_LIMIT          ((u32) -1)
+#define ACPI_MUTEX_SEM              1
+
+
+/* Functions for acpi_os_signal */
+
+#define ACPI_SIGNAL_FATAL           0
+#define ACPI_SIGNAL_BREAKPOINT      1
+
+struct acpi_signal_fatal_info
+{
+	u32                             type;
+	u32                             code;
+	u32                             argument;
+};
+
+
+/*
+ * OSL Initialization and shutdown primitives
+ */
+
+acpi_status
+acpi_os_initialize (
+	void);
+
+acpi_status
+acpi_os_terminate (
+	void);
+
+
+/*
+ * ACPI Table interfaces
+ */
+
+acpi_status
+acpi_os_get_root_pointer (
+	u32                             flags,
+	struct acpi_pointer             *address);
+
+acpi_status
+acpi_os_predefined_override (
+	const struct acpi_predefined_names *init_val,
+	acpi_string                         *new_val);
+
+acpi_status
+acpi_os_table_override (
+	struct acpi_table_header        *existing_table,
+	struct acpi_table_header        **new_table);
+
+
+/*
+ * Synchronization primitives
+ */
+
+acpi_status
+acpi_os_create_semaphore (
+	u32                             max_units,
+	u32                             initial_units,
+	acpi_handle                     *out_handle);
+
+acpi_status
+acpi_os_delete_semaphore (
+	acpi_handle                     handle);
+
+acpi_status
+acpi_os_wait_semaphore (
+	acpi_handle                     handle,
+	u32                             units,
+	u16                             timeout);
+
+acpi_status
+acpi_os_signal_semaphore (
+	acpi_handle                     handle,
+	u32                             units);
+
+acpi_status
+acpi_os_create_lock (
+	acpi_handle                     *out_handle);
+
+void
+acpi_os_delete_lock (
+	acpi_handle                     handle);
+
+void
+acpi_os_acquire_lock (
+	acpi_handle                     handle,
+	u32                             flags);
+
+void
+acpi_os_release_lock (
+	acpi_handle                     handle,
+	u32                             flags);
+
+
+/*
+ * Memory allocation and mapping
+ */
+
+void *
+acpi_os_allocate (
+	acpi_size                       size);
+
+void
+acpi_os_free (
+	void *                          memory);
+
+acpi_status
+acpi_os_map_memory (
+	acpi_physical_address           physical_address,
+	acpi_size                       size,
+	void __iomem                  **logical_address);
+
+void
+acpi_os_unmap_memory (
+	void __iomem                  *logical_address,
+	acpi_size                       size);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_os_get_physical_address (
+	void                            *logical_address,
+	acpi_physical_address           *physical_address);
+#endif
+
+
+/*
+ * Interrupt handlers
+ */
+
+acpi_status
+acpi_os_install_interrupt_handler (
+	u32                             gsi,
+	acpi_osd_handler                service_routine,
+	void                            *context);
+
+acpi_status
+acpi_os_remove_interrupt_handler (
+	u32                             gsi,
+	acpi_osd_handler                service_routine);
+
+
+/*
+ * Threads and Scheduling
+ */
+
+u32
+acpi_os_get_thread_id (
+	void);
+
+acpi_status
+acpi_os_queue_for_execution (
+	u32                             priority,
+	acpi_osd_exec_callback          function,
+	void                            *context);
+
+void
+acpi_os_wait_events_complete(
+	void * context);
+
+void
+acpi_os_wait_events_complete (
+	void                            *context);
+
+void
+acpi_os_sleep (
+	acpi_integer                    milliseconds);
+
+void
+acpi_os_stall (
+	u32                             microseconds);
+
+
+/*
+ * Platform and hardware-independent I/O interfaces
+ */
+
+acpi_status
+acpi_os_read_port (
+	acpi_io_address                 address,
+	u32                             *value,
+	u32                             width);
+
+acpi_status
+acpi_os_write_port (
+	acpi_io_address                 address,
+	u32                             value,
+	u32                             width);
+
+
+/*
+ * Platform and hardware-independent physical memory interfaces
+ */
+
+acpi_status
+acpi_os_read_memory (
+	acpi_physical_address           address,
+	u32                             *value,
+	u32                             width);
+
+acpi_status
+acpi_os_write_memory (
+	acpi_physical_address           address,
+	u32                             value,
+	u32                             width);
+
+
+/*
+ * Platform and hardware-independent PCI configuration space access
+ * Note: Can't use "Register" as a parameter, changed to "Reg" --
+ * certain compilers complain.
+ */
+
+acpi_status
+acpi_os_read_pci_configuration (
+	struct acpi_pci_id              *pci_id,
+	u32                             reg,
+	void                            *value,
+	u32                             width);
+
+acpi_status
+acpi_os_write_pci_configuration (
+	struct acpi_pci_id              *pci_id,
+	u32                             reg,
+	acpi_integer                    value,
+	u32                             width);
+
+/*
+ * Interim function needed for PCI IRQ routing
+ */
+
+void
+acpi_os_derive_pci_id(
+	acpi_handle                     rhandle,
+	acpi_handle                     chandle,
+	struct acpi_pci_id              **pci_id);
+
+/*
+ * Miscellaneous
+ */
+
+u8
+acpi_os_readable (
+	void                            *pointer,
+	acpi_size                       length);
+
+#ifdef ACPI_FUTURE_USAGE
+u8
+acpi_os_writable (
+	void                            *pointer,
+	acpi_size                       length);
+#endif
+
+u64
+acpi_os_get_timer (
+	void);
+
+acpi_status
+acpi_os_signal (
+	u32                             function,
+	void                            *info);
+
+/*
+ * Debug print routines
+ */
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_os_printf (
+	const char                      *format,
+	...);
+
+void
+acpi_os_vprintf (
+	const char                      *format,
+	va_list                 args);
+
+void
+acpi_os_redirect_output (
+	void                            *destination);
+
+
+/*
+ * Debug input
+ */
+
+#ifdef ACPI_FUTURE_USAGE
+u32
+acpi_os_get_line (
+	char                            *buffer);
+#endif
+
+
+/*
+ * Directory manipulation
+ */
+
+void *
+acpi_os_open_directory (
+	char                            *pathname,
+	char                            *wildcard_spec,
+	char                            requested_file_type);
+
+/* requeste_file_type values */
+
+#define REQUEST_FILE_ONLY                   0
+#define REQUEST_DIR_ONLY                    1
+
+
+char *
+acpi_os_get_next_filename (
+	void                            *dir_handle);
+
+void
+acpi_os_close_directory (
+	void                            *dir_handle);
+
+/*
+ * Debug
+ */
+
+void
+acpi_os_dbg_assert(
+	void                            *failed_assertion,
+	void                            *file_name,
+	u32                             line_number,
+	char                            *message);
+
+
+#endif /* __ACPIOSXF_H__ */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
new file mode 100644
index 000000000000..00d78b79652e
--- /dev/null
+++ b/include/acpi/acpixf.h
@@ -0,0 +1,497 @@
+
+/******************************************************************************
+ *
+ * Name: acpixf.h - External interfaces to the ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#ifndef __ACXFACE_H__
+#define __ACXFACE_H__
+
+#include "actypes.h"
+#include "actbl.h"
+
+
+ /*
+ * Global interfaces
+ */
+
+acpi_status
+acpi_initialize_subsystem (
+	void);
+
+acpi_status
+acpi_enable_subsystem (
+	u32                             flags);
+
+acpi_status
+acpi_initialize_objects (
+	u32                             flags);
+
+acpi_status
+acpi_terminate (
+	void);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_subsystem_status (
+	void);
+#endif
+
+acpi_status
+acpi_enable (
+	void);
+
+acpi_status
+acpi_disable (
+	void);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_system_info (
+	struct acpi_buffer              *ret_buffer);
+#endif
+
+const char *
+acpi_format_exception (
+	acpi_status                     exception);
+
+acpi_status
+acpi_purge_cached_objects (
+	void);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_install_initialization_handler (
+	acpi_init_handler               handler,
+	u32                             function);
+#endif
+
+/*
+ * ACPI Memory manager
+ */
+
+void *
+acpi_allocate (
+	u32                             size);
+
+void *
+acpi_callocate (
+	u32                             size);
+
+void
+acpi_free (
+	void                            *address);
+
+
+/*
+ * ACPI table manipulation interfaces
+ */
+
+acpi_status
+acpi_find_root_pointer (
+	u32                             flags,
+	struct acpi_pointer             *rsdp_address);
+
+acpi_status
+acpi_load_tables (
+	void);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_load_table (
+	struct acpi_table_header        *table_ptr);
+
+acpi_status
+acpi_unload_table (
+	acpi_table_type                 table_type);
+
+acpi_status
+acpi_get_table_header (
+	acpi_table_type                 table_type,
+	u32                             instance,
+	struct acpi_table_header        *out_table_header);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+acpi_status
+acpi_get_table (
+	acpi_table_type                 table_type,
+	u32                             instance,
+	struct acpi_buffer              *ret_buffer);
+
+acpi_status
+acpi_get_firmware_table (
+	acpi_string                     signature,
+	u32                             instance,
+	u32                             flags,
+	struct acpi_table_header        **table_pointer);
+
+
+/*
+ * Namespace and name interfaces
+ */
+
+acpi_status
+acpi_walk_namespace (
+	acpi_object_type                type,
+	acpi_handle                     start_object,
+	u32                             max_depth,
+	acpi_walk_callback              user_function,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_get_devices (
+	char                            *HID,
+	acpi_walk_callback              user_function,
+	void                            *context,
+	void                            **return_value);
+
+acpi_status
+acpi_get_name (
+	acpi_handle                     handle,
+	u32                             name_type,
+	struct acpi_buffer              *ret_path_ptr);
+
+acpi_status
+acpi_get_handle (
+	acpi_handle                     parent,
+	acpi_string                     pathname,
+	acpi_handle                     *ret_handle);
+
+acpi_status
+acpi_attach_data (
+	acpi_handle                     obj_handle,
+	acpi_object_handler             handler,
+	void                            *data);
+
+acpi_status
+acpi_detach_data (
+	acpi_handle                     obj_handle,
+	acpi_object_handler             handler);
+
+acpi_status
+acpi_get_data (
+	acpi_handle                     obj_handle,
+	acpi_object_handler             handler,
+	void                            **data);
+
+
+/*
+ * Object manipulation and enumeration
+ */
+
+acpi_status
+acpi_evaluate_object (
+	acpi_handle                     object,
+	acpi_string                     pathname,
+	struct acpi_object_list         *parameter_objects,
+	struct acpi_buffer              *return_object_buffer);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_evaluate_object_typed (
+	acpi_handle                     object,
+	acpi_string                     pathname,
+	struct acpi_object_list         *external_params,
+	struct acpi_buffer              *return_buffer,
+	acpi_object_type                return_type);
+#endif
+
+acpi_status
+acpi_get_object_info (
+	acpi_handle                     handle,
+	struct acpi_buffer              *return_buffer);
+
+acpi_status
+acpi_get_next_object (
+	acpi_object_type                type,
+	acpi_handle                     parent,
+	acpi_handle                     child,
+	acpi_handle                     *out_handle);
+
+acpi_status
+acpi_get_type (
+	acpi_handle                     object,
+	acpi_object_type                *out_type);
+
+acpi_status
+acpi_get_parent (
+	acpi_handle                     object,
+	acpi_handle                     *out_handle);
+
+
+/*
+ * Event handler interfaces
+ */
+
+acpi_status
+acpi_install_fixed_event_handler (
+	u32                             acpi_event,
+	acpi_event_handler              handler,
+	void                            *context);
+
+acpi_status
+acpi_remove_fixed_event_handler (
+	u32                             acpi_event,
+	acpi_event_handler              handler);
+
+acpi_status
+acpi_install_notify_handler (
+	acpi_handle                     device,
+	u32                             handler_type,
+	acpi_notify_handler             handler,
+	void                            *context);
+
+acpi_status
+acpi_remove_notify_handler (
+	acpi_handle                     device,
+	u32                             handler_type,
+	acpi_notify_handler             handler);
+
+acpi_status
+acpi_install_address_space_handler (
+	acpi_handle                     device,
+	acpi_adr_space_type             space_id,
+	acpi_adr_space_handler          handler,
+	acpi_adr_space_setup            setup,
+	void                            *context);
+
+acpi_status
+acpi_remove_address_space_handler (
+	acpi_handle                     device,
+	acpi_adr_space_type             space_id,
+	acpi_adr_space_handler          handler);
+
+acpi_status
+acpi_install_gpe_handler (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u32                             type,
+	acpi_event_handler              address,
+	void                            *context);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_install_exception_handler (
+	acpi_exception_handler          handler);
+#endif
+
+
+/*
+ * Event interfaces
+ */
+
+acpi_status
+acpi_acquire_global_lock (
+	u16                             timeout,
+	u32                             *handle);
+
+acpi_status
+acpi_release_global_lock (
+	u32                             handle);
+
+acpi_status
+acpi_remove_gpe_handler (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	acpi_event_handler              address);
+
+acpi_status
+acpi_enable_event (
+	u32                             event,
+	u32                             flags);
+
+acpi_status
+acpi_disable_event (
+	u32                             event,
+	u32                             flags);
+
+acpi_status
+acpi_clear_event (
+	u32                             event);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_event_status (
+	u32                             event,
+	acpi_event_status               *event_status);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+acpi_status
+acpi_set_gpe_type (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u8                              type);
+
+acpi_status
+acpi_enable_gpe (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u32                             flags);
+
+acpi_status
+acpi_disable_gpe (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u32                             flags);
+
+acpi_status
+acpi_clear_gpe (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u32                             flags);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_gpe_status (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number,
+	u32                             flags,
+	acpi_event_status               *event_status);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+acpi_status
+acpi_install_gpe_block (
+	acpi_handle                     gpe_device,
+	struct acpi_generic_address     *gpe_block_address,
+	u32                             register_count,
+	u32                             interrupt_level);
+
+acpi_status
+acpi_remove_gpe_block (
+	acpi_handle                     gpe_device);
+
+
+/*
+ * Resource interfaces
+ */
+
+typedef
+acpi_status (*ACPI_WALK_RESOURCE_CALLBACK) (
+	struct acpi_resource            *resource,
+	void                            *context);
+
+
+acpi_status
+acpi_get_current_resources(
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *ret_buffer);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_possible_resources(
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *ret_buffer);
+#endif
+
+acpi_status
+acpi_walk_resources (
+	acpi_handle                             device_handle,
+	char                                    *path,
+	ACPI_WALK_RESOURCE_CALLBACK     user_function,
+	void                                    *context);
+
+acpi_status
+acpi_set_current_resources (
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *in_buffer);
+
+acpi_status
+acpi_get_irq_routing_table (
+	acpi_handle                     bus_device_handle,
+	struct acpi_buffer              *ret_buffer);
+
+acpi_status
+acpi_resource_to_address64 (
+	struct acpi_resource            *resource,
+	struct acpi_resource_address64 *out);
+
+/*
+ * Hardware (ACPI device) interfaces
+ */
+
+acpi_status
+acpi_get_register (
+	u32                             register_id,
+	u32                             *return_value,
+	u32                             flags);
+
+acpi_status
+acpi_set_register (
+	u32                             register_id,
+	u32                             value,
+	u32                             flags);
+
+acpi_status
+acpi_set_firmware_waking_vector (
+	acpi_physical_address           physical_address);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_firmware_waking_vector (
+	acpi_physical_address           *physical_address);
+#endif
+
+acpi_status
+acpi_get_sleep_type_data (
+	u8                              sleep_state,
+	u8                              *slp_typ_a,
+	u8                              *slp_typ_b);
+
+acpi_status
+acpi_enter_sleep_state_prep (
+	u8                              sleep_state);
+
+acpi_status asmlinkage
+acpi_enter_sleep_state (
+	u8                              sleep_state);
+
+acpi_status asmlinkage
+acpi_enter_sleep_state_s4bios (
+	void);
+
+acpi_status
+acpi_leave_sleep_state (
+	u8                              sleep_state);
+
+
+#endif /* __ACXFACE_H__ */
diff --git a/include/acpi/acresrc.h b/include/acpi/acresrc.h
new file mode 100644
index 000000000000..93c55ff5c237
--- /dev/null
+++ b/include/acpi/acresrc.h
@@ -0,0 +1,395 @@
+/******************************************************************************
+ *
+ * Name: acresrc.h - Resource Manager function prototypes
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACRESRC_H__
+#define __ACRESRC_H__
+
+
+/*
+ *  Function prototypes called from Acpi* APIs
+ */
+
+acpi_status
+acpi_rs_get_prt_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer);
+
+
+acpi_status
+acpi_rs_get_crs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_rs_get_prs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer);
+#endif
+
+acpi_status
+acpi_rs_get_method_data (
+	acpi_handle                     handle,
+	char                            *path,
+	struct acpi_buffer              *ret_buffer);
+
+acpi_status
+acpi_rs_set_srs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer);
+
+acpi_status
+acpi_rs_create_resource_list (
+	union acpi_operand_object       *byte_stream_buffer,
+	struct acpi_buffer              *output_buffer);
+
+acpi_status
+acpi_rs_create_byte_stream (
+	struct acpi_resource            *linked_list_buffer,
+	struct acpi_buffer              *output_buffer);
+
+acpi_status
+acpi_rs_create_pci_routing_table (
+	union acpi_operand_object       *package_object,
+	struct acpi_buffer              *output_buffer);
+
+
+/*
+ * Function prototypes called from acpi_rs_create*
+ */
+#ifdef ACPI_FUTURE_USAGE
+void
+acpi_rs_dump_irq (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_address16 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_address32 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_address64 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_dma (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_io (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_extended_irq (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_fixed_io (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_fixed_memory32 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_memory24 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_memory32 (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_start_depend_fns (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_vendor_specific (
+	union acpi_resource_data        *data);
+
+void
+acpi_rs_dump_resource_list (
+	struct acpi_resource            *resource);
+
+void
+acpi_rs_dump_irq_list (
+	u8                              *route_table);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+acpi_status
+acpi_rs_get_byte_stream_start (
+	u8                              *byte_stream_buffer,
+	u8                              **byte_stream_start,
+	u32                             *size);
+
+acpi_status
+acpi_rs_get_list_length (
+	u8                              *byte_stream_buffer,
+	u32                             byte_stream_buffer_length,
+	acpi_size                       *size_needed);
+
+acpi_status
+acpi_rs_get_byte_stream_length (
+	struct acpi_resource            *linked_list_buffer,
+	acpi_size                       *size_needed);
+
+acpi_status
+acpi_rs_get_pci_routing_table_length (
+	union acpi_operand_object       *package_object,
+	acpi_size                       *buffer_size_needed);
+
+acpi_status
+acpi_rs_byte_stream_to_list (
+	u8                              *byte_stream_buffer,
+	u32                             byte_stream_buffer_length,
+	u8                              *output_buffer);
+
+acpi_status
+acpi_rs_list_to_byte_stream (
+	struct acpi_resource            *linked_list,
+	acpi_size                       byte_stream_size_needed,
+	u8                              *output_buffer);
+
+acpi_status
+acpi_rs_io_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_fixed_io_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_io_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_fixed_io_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_dma_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_dma_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_address16_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_address16_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_address32_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_address32_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_address64_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_address64_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_start_depend_fns_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_end_depend_fns_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_start_depend_fns_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_end_depend_fns_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_memory24_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_memory24_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_memory32_range_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_fixed_memory32_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_memory32_range_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_fixed_memory32_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_extended_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_extended_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_end_tag_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_end_tag_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+acpi_status
+acpi_rs_vendor_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size);
+
+acpi_status
+acpi_rs_vendor_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed);
+
+u8
+acpi_rs_get_resource_type (
+	u8                              resource_start_byte);
+
+#endif  /* __ACRESRC_H__ */
diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h
new file mode 100644
index 000000000000..c97843f6bcbc
--- /dev/null
+++ b/include/acpi/acstruct.h
@@ -0,0 +1,223 @@
+/******************************************************************************
+ *
+ * Name: acstruct.h - Internal structs
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACSTRUCT_H__
+#define __ACSTRUCT_H__
+
+
+/*****************************************************************************
+ *
+ * Tree walking typedefs and structs
+ *
+ ****************************************************************************/
+
+
+/*
+ * Walk state - current state of a parse tree walk.  Used for both a leisurely stroll through
+ * the tree (for whatever reason), and for control method execution.
+ */
+
+#define ACPI_NEXT_OP_DOWNWARD       1
+#define ACPI_NEXT_OP_UPWARD         2
+
+#define ACPI_WALK_NON_METHOD        0
+#define ACPI_WALK_METHOD            1
+#define ACPI_WALK_METHOD_RESTART    2
+#define ACPI_WALK_CONST_REQUIRED    3
+#define ACPI_WALK_CONST_OPTIONAL    4
+
+struct acpi_walk_state
+{
+	u8                                  data_type;                          /* To differentiate various internal objs MUST BE FIRST!*/\
+	u8                                  walk_type;
+	acpi_owner_id                       owner_id;                           /* Owner of objects created during the walk */
+	u8                                  last_predicate;                     /* Result of last predicate */
+	u8                                  reserved;                           /* For alignment */
+	u8                                  current_result;                     /* */
+	u8                                  next_op_info;                       /* Info about next_op */
+	u8                                  num_operands;                       /* Stack pointer for Operands[] array */
+	u8                                  return_used;
+	u16                                 opcode;                             /* Current AML opcode */
+	u8                                  scope_depth;
+	u8                                  reserved1;
+	u32                                 arg_count;                          /* push for fixed or var args */
+	u32                                 aml_offset;
+	u32                                 arg_types;
+	u32                                 method_breakpoint;                  /* For single stepping */
+	u32                                 user_breakpoint;                    /* User AML breakpoint */
+	u32                                 parse_flags;
+	u32                                 prev_arg_types;
+
+	u8                                  *aml_last_while;
+	struct acpi_namespace_node          arguments[ACPI_METHOD_NUM_ARGS];    /* Control method arguments */
+	union acpi_operand_object           **caller_return_desc;
+	union acpi_generic_state            *control_state;                     /* List of control states (nested IFs) */
+	struct acpi_namespace_node          *deferred_node;                     /* Used when executing deferred opcodes */
+	struct acpi_gpe_event_info          *gpe_event_info;                    /* Info for GPE (_Lxx/_Exx methods only */
+	union acpi_operand_object           *implicit_return_obj;
+	struct acpi_namespace_node          local_variables[ACPI_METHOD_NUM_LOCALS];    /* Control method locals */
+	struct acpi_namespace_node          *method_call_node;                  /* Called method Node*/
+	union acpi_parse_object             *method_call_op;                    /* method_call Op if running a method */
+	union acpi_operand_object           *method_desc;                       /* Method descriptor if running a method */
+	struct acpi_namespace_node          *method_node;                       /* Method node if running a method. */
+	union acpi_parse_object             *op;                                /* Current parser op */
+	union acpi_operand_object           *operands[ACPI_OBJ_NUM_OPERANDS+1]; /* Operands passed to the interpreter (+1 for NULL terminator) */
+	const struct acpi_opcode_info       *op_info;                           /* Info on current opcode */
+	union acpi_parse_object             *origin;                            /* Start of walk [Obsolete] */
+	union acpi_operand_object           **params;
+	struct acpi_parse_state             parser_state;                       /* Current state of parser */
+	union acpi_operand_object           *result_obj;
+	union acpi_generic_state            *results;                           /* Stack of accumulated results */
+	union acpi_operand_object           *return_desc;                       /* Return object, if any */
+	union acpi_generic_state            *scope_info;                        /* Stack of nested scopes */
+
+	union acpi_parse_object             *prev_op;                           /* Last op that was processed */
+	union acpi_parse_object             *next_op;                           /* next op to be processed */
+	acpi_parse_downwards                descending_callback;
+	acpi_parse_upwards                  ascending_callback;
+	struct acpi_thread_state            *thread;
+	struct acpi_walk_state              *next;                              /* Next walk_state in list */
+};
+
+
+/* Info used by acpi_ps_init_objects */
+
+struct acpi_init_walk_info
+{
+	u16                             method_count;
+	u16                             device_count;
+	u16                             op_region_count;
+	u16                             field_count;
+	u16                             buffer_count;
+	u16                             package_count;
+	u16                             op_region_init;
+	u16                             field_init;
+	u16                             buffer_init;
+	u16                             package_init;
+	u16                             object_count;
+	struct acpi_table_desc          *table_desc;
+};
+
+
+/* Info used by acpi_ns_initialize_devices */
+
+struct acpi_device_walk_info
+{
+	u16                             device_count;
+	u16                             num_STA;
+	u16                             num_INI;
+	struct acpi_table_desc          *table_desc;
+};
+
+
+/* TBD: [Restructure] Merge with struct above */
+
+struct acpi_walk_info
+{
+	u32                             debug_level;
+	u32                             owner_id;
+	u8                              display_type;
+};
+
+/* Display Types */
+
+#define ACPI_DISPLAY_SUMMARY    0
+#define ACPI_DISPLAY_OBJECTS    1
+
+struct acpi_get_devices_info
+{
+	acpi_walk_callback              user_function;
+	void                            *context;
+	char                            *hid;
+};
+
+
+union acpi_aml_operands
+{
+	union acpi_operand_object           *operands[7];
+
+	struct
+	{
+		struct acpi_object_integer      *type;
+		struct acpi_object_integer      *code;
+		struct acpi_object_integer      *argument;
+
+	} fatal;
+
+	struct
+	{
+		union acpi_operand_object       *source;
+		struct acpi_object_integer      *index;
+		union acpi_operand_object       *target;
+
+	} index;
+
+	struct
+	{
+		union acpi_operand_object       *source;
+		struct acpi_object_integer      *index;
+		struct acpi_object_integer      *length;
+		union acpi_operand_object       *target;
+
+	} mid;
+};
+
+
+/* Internal method parameter list */
+
+struct acpi_parameter_info
+{
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       **parameters;
+	union acpi_operand_object       *return_object;
+	u8                              parameter_type;
+	u8                              return_object_type;
+};
+
+/* Types for parameter_type above */
+
+#define ACPI_PARAM_ARGS                 0
+#define ACPI_PARAM_GPE                  1
+
+
+#endif
diff --git a/include/acpi/actables.h b/include/acpi/actables.h
new file mode 100644
index 000000000000..e8f5d4ffd452
--- /dev/null
+++ b/include/acpi/actables.h
@@ -0,0 +1,235 @@
+/******************************************************************************
+ *
+ * Name: actables.h - ACPI table management
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTABLES_H__
+#define __ACTABLES_H__
+
+
+/* Used in acpi_tb_map_acpi_table for size parameter if table header is to be used */
+
+#define SIZE_IN_HEADER          0
+
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_tb_handle_to_object (
+	u16                             table_id,
+	struct acpi_table_desc          **table_desc);
+#endif
+
+/*
+ * tbconvrt - Table conversion routines
+ */
+
+acpi_status
+acpi_tb_convert_to_xsdt (
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_convert_table_fadt (
+	void);
+
+acpi_status
+acpi_tb_build_common_facs (
+	struct acpi_table_desc          *table_info);
+
+u32
+acpi_tb_get_table_count (
+	struct rsdp_descriptor          *RSDP,
+	struct acpi_table_header        *RSDT);
+
+/*
+ * tbget - Table "get" routines
+ */
+
+acpi_status
+acpi_tb_get_table (
+	struct acpi_pointer             *address,
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_get_table_header (
+	struct acpi_pointer             *address,
+	struct acpi_table_header        *return_header);
+
+acpi_status
+acpi_tb_get_table_body (
+	struct acpi_pointer             *address,
+	struct acpi_table_header        *header,
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_get_this_table (
+	struct acpi_pointer             *address,
+	struct acpi_table_header        *header,
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_table_override (
+	struct acpi_table_header        *header,
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_get_table_ptr (
+	acpi_table_type                 table_type,
+	u32                             instance,
+	struct acpi_table_header        **table_ptr_loc);
+
+acpi_status
+acpi_tb_verify_rsdp (
+	struct acpi_pointer             *address);
+
+void
+acpi_tb_get_rsdt_address (
+	struct acpi_pointer             *out_address);
+
+acpi_status
+acpi_tb_validate_rsdt (
+	struct acpi_table_header        *table_ptr);
+
+acpi_status
+acpi_tb_get_required_tables (
+	void);
+
+acpi_status
+acpi_tb_get_primary_table (
+	struct acpi_pointer             *address,
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_get_secondary_table (
+	struct acpi_pointer             *address,
+	acpi_string                     signature,
+	struct acpi_table_desc          *table_info);
+
+/*
+ * tbinstall - Table installation
+ */
+
+acpi_status
+acpi_tb_install_table (
+	struct acpi_table_desc          *table_info);
+
+acpi_status
+acpi_tb_match_signature (
+	char                            *signature,
+	struct acpi_table_desc          *table_info,
+	u8                              search_type);
+
+acpi_status
+acpi_tb_recognize_table (
+	struct acpi_table_desc          *table_info,
+	u8                              search_type);
+
+acpi_status
+acpi_tb_init_table_descriptor (
+	acpi_table_type                 table_type,
+	struct acpi_table_desc          *table_info);
+
+
+/*
+ * tbremove - Table removal and deletion
+ */
+
+void
+acpi_tb_delete_all_tables (
+	void);
+
+void
+acpi_tb_delete_tables_by_type (
+	acpi_table_type                 type);
+
+void
+acpi_tb_delete_single_table (
+	struct acpi_table_desc          *table_desc);
+
+struct acpi_table_desc *
+acpi_tb_uninstall_table (
+	struct acpi_table_desc          *table_desc);
+
+
+/*
+ * tbrsd - RSDP, RSDT utilities
+ */
+
+acpi_status
+acpi_tb_get_table_rsdt (
+	void);
+
+u8 *
+acpi_tb_scan_memory_for_rsdp (
+	u8                              *start_address,
+	u32                             length);
+
+acpi_status
+acpi_tb_find_rsdp (
+	struct acpi_table_desc          *table_info,
+	u32                             flags);
+
+
+/*
+ * tbutils - common table utilities
+ */
+
+acpi_status
+acpi_tb_find_table (
+	char                            *signature,
+	char                            *oem_id,
+	char                            *oem_table_id,
+	struct acpi_table_header        **table_ptr);
+
+acpi_status
+acpi_tb_verify_table_checksum (
+	struct acpi_table_header        *table_header);
+
+u8
+acpi_tb_checksum (
+	void                            *buffer,
+	u32                             length);
+
+acpi_status
+acpi_tb_validate_table_header (
+	struct acpi_table_header        *table_header);
+
+
+#endif /* __ACTABLES_H__ */
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
new file mode 100644
index 000000000000..7eee731112b1
--- /dev/null
+++ b/include/acpi/actbl.h
@@ -0,0 +1,354 @@
+/******************************************************************************
+ *
+ * Name: actbl.h - Table data structures defined in ACPI specification
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL_H__
+#define __ACTBL_H__
+
+
+/*
+ *  Values for description table header signatures
+ */
+#define RSDP_NAME               "RSDP"
+#define RSDP_SIG                "RSD PTR "  /* RSDT Pointer signature */
+#define APIC_SIG                "APIC"      /* Multiple APIC Description Table */
+#define DSDT_SIG                "DSDT"      /* Differentiated System Description Table */
+#define FADT_SIG                "FACP"      /* Fixed ACPI Description Table */
+#define FACS_SIG                "FACS"      /* Firmware ACPI Control Structure */
+#define PSDT_SIG                "PSDT"      /* Persistent System Description Table */
+#define RSDT_SIG                "RSDT"      /* Root System Description Table */
+#define XSDT_SIG                "XSDT"      /* Extended  System Description Table */
+#define SSDT_SIG                "SSDT"      /* Secondary System Description Table */
+#define SBST_SIG                "SBST"      /* Smart Battery Specification Table */
+#define SPIC_SIG                "SPIC"      /* IOSAPIC table */
+#define BOOT_SIG                "BOOT"      /* Boot table */
+
+
+#define GL_OWNED                0x02        /* Ownership of global lock is bit 1 */
+
+
+/*
+ * Common table types.  The base code can remain
+ * constant if the underlying tables are changed
+ */
+#define RSDT_DESCRIPTOR         struct rsdt_descriptor_rev2
+#define XSDT_DESCRIPTOR         struct xsdt_descriptor_rev2
+#define FACS_DESCRIPTOR         struct facs_descriptor_rev2
+#define FADT_DESCRIPTOR         struct fadt_descriptor_rev2
+
+
+#pragma pack(1)
+
+/*
+ * ACPI Version-independent tables
+ *
+ * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
+ * are in separate files.
+ */
+struct rsdp_descriptor         /* Root System Descriptor Pointer */
+{
+	char                            signature [8];          /* ACPI signature, contains "RSD PTR " */
+	u8                              checksum;               /* To make sum of struct == 0 */
+	char                            oem_id [6];             /* OEM identification */
+	u8                              revision;               /* Must be 0 for 1.0, 2 for 2.0 */
+	u32                             rsdt_physical_address;  /* 32-bit physical address of RSDT */
+	u32                             length;                 /* XSDT Length in bytes including hdr */
+	u64                             xsdt_physical_address;  /* 64-bit physical address of XSDT */
+	u8                              extended_checksum;      /* Checksum of entire table */
+	char                            reserved [3];           /* Reserved field must be 0 */
+};
+
+
+struct acpi_common_facs          /* Common FACS for internal use */
+{
+	u32                             *global_lock;
+	u64                             *firmware_waking_vector;
+	u8                              vector_width;
+};
+
+
+#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
+	char                            signature [4];          /* ACPI signature (4 ASCII characters) */\
+	u32                             length;                 /* Length of table, in bytes, including header */\
+	u8                              revision;               /* ACPI Specification minor version # */\
+	u8                              checksum;               /* To make sum of entire table == 0 */\
+	char                            oem_id [6];             /* OEM identification */\
+	char                            oem_table_id [8];       /* OEM table identification */\
+	u32                             oem_revision;           /* OEM revision number */\
+	char                            asl_compiler_id [4];    /* ASL compiler vendor ID */\
+	u32                             asl_compiler_revision;  /* ASL compiler revision number */
+
+
+struct acpi_table_header         /* ACPI common table header */
+{
+	ACPI_TABLE_HEADER_DEF
+};
+
+
+/*
+ * MADT values and structures
+ */
+
+/* Values for MADT PCATCompat */
+
+#define DUAL_PIC                0
+#define MULTIPLE_APIC           1
+
+
+/* Master MADT */
+
+struct multiple_apic_table
+{
+	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+	u32                             local_apic_address;     /* Physical address of local APIC */
+	u32                             PCATcompat      : 1;    /* A one indicates system also has dual 8259s */
+	u32                             reserved1       : 31;
+};
+
+
+/* Values for Type in APIC_HEADER_DEF */
+
+#define APIC_PROCESSOR          0
+#define APIC_IO                 1
+#define APIC_XRUPT_OVERRIDE     2
+#define APIC_NMI                3
+#define APIC_LOCAL_NMI          4
+#define APIC_ADDRESS_OVERRIDE   5
+#define APIC_IO_SAPIC           6
+#define APIC_LOCAL_SAPIC        7
+#define APIC_XRUPT_SOURCE       8
+#define APIC_RESERVED           9           /* 9 and greater are reserved */
+
+/*
+ * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
+ */
+#define APIC_HEADER_DEF                     /* Common APIC sub-structure header */\
+	u8                              type; \
+	u8                              length;
+
+struct apic_header
+{
+	APIC_HEADER_DEF
+};
+
+/* Values for MPS INTI flags */
+
+#define POLARITY_CONFORMS       0
+#define POLARITY_ACTIVE_HIGH    1
+#define POLARITY_RESERVED       2
+#define POLARITY_ACTIVE_LOW     3
+
+#define TRIGGER_CONFORMS        0
+#define TRIGGER_EDGE            1
+#define TRIGGER_RESERVED        2
+#define TRIGGER_LEVEL           3
+
+/* Common flag definitions */
+
+#define MPS_INTI_FLAGS \
+	u16                             polarity        : 2;    /* Polarity of APIC I/O input signals */\
+	u16                             trigger_mode    : 2;    /* Trigger mode of APIC input signals */\
+	u16                             reserved1       : 12;   /* Reserved, must be zero */
+
+#define LOCAL_APIC_FLAGS \
+	u32                             processor_enabled: 1;   /* Processor is usable if set */\
+	u32                             reserved2       : 31;   /* Reserved, must be zero */
+
+/* Sub-structures for MADT */
+
+struct madt_processor_apic
+{
+	APIC_HEADER_DEF
+	u8                              processor_id;           /* ACPI processor id */
+	u8                              local_apic_id;          /* Processor's local APIC id */
+	LOCAL_APIC_FLAGS
+};
+
+struct madt_io_apic
+{
+	APIC_HEADER_DEF
+	u8                              io_apic_id;             /* I/O APIC ID */
+	u8                              reserved;               /* Reserved - must be zero */
+	u32                             address;                /* APIC physical address */
+	u32                             interrupt;              /* Global system interrupt where INTI
+			  * lines start */
+};
+
+struct madt_interrupt_override
+{
+	APIC_HEADER_DEF
+	u8                              bus;                    /* 0 - ISA */
+	u8                              source;                 /* Interrupt source (IRQ) */
+	u32                             interrupt;              /* Global system interrupt */
+	MPS_INTI_FLAGS
+};
+
+struct madt_nmi_source
+{
+	APIC_HEADER_DEF
+	MPS_INTI_FLAGS
+	u32                             interrupt;              /* Global system interrupt */
+};
+
+struct madt_local_apic_nmi
+{
+	APIC_HEADER_DEF
+	u8                              processor_id;           /* ACPI processor id */
+	MPS_INTI_FLAGS
+	u8                              lint;                   /* LINTn to which NMI is connected */
+};
+
+struct madt_address_override
+{
+	APIC_HEADER_DEF
+	u16                             reserved;               /* Reserved - must be zero */
+	u64                             address;                /* APIC physical address */
+};
+
+struct madt_io_sapic
+{
+	APIC_HEADER_DEF
+	u8                              io_sapic_id;            /* I/O SAPIC ID */
+	u8                              reserved;               /* Reserved - must be zero */
+	u32                             interrupt_base;         /* Glocal interrupt for SAPIC start */
+	u64                             address;                /* SAPIC physical address */
+};
+
+struct madt_local_sapic
+{
+	APIC_HEADER_DEF
+	u8                              processor_id;           /* ACPI processor id */
+	u8                              local_sapic_id;         /* SAPIC ID */
+	u8                              local_sapic_eid;        /* SAPIC EID */
+	u8                              reserved [3];           /* Reserved - must be zero */
+	LOCAL_APIC_FLAGS
+	u32                             processor_uID;          /* Numeric UID - ACPI 3.0 */
+	char                            processor_uIDstring[1]; /* String UID  - ACPI 3.0 */
+};
+
+struct madt_interrupt_source
+{
+	APIC_HEADER_DEF
+	MPS_INTI_FLAGS
+	u8                              interrupt_type;         /* 1=PMI, 2=INIT, 3=corrected */
+	u8                              processor_id;           /* Processor ID */
+	u8                              processor_eid;          /* Processor EID */
+	u8                              io_sapic_vector;        /* Vector value for PMI interrupts */
+	u32                             interrupt;              /* Global system interrupt */
+	u32                             flags;                  /* Interrupt Source Flags */
+};
+
+
+/*
+ * Smart Battery
+ */
+struct smart_battery_table
+{
+	ACPI_TABLE_HEADER_DEF
+	u32                             warning_level;
+	u32                             low_level;
+	u32                             critical_level;
+};
+
+
+#pragma pack()
+
+
+/*
+ * ACPI Table information.  We save the table address, length,
+ * and type of memory allocation (mapped or allocated) for each
+ * table for 1) when we exit, and 2) if a new table is installed
+ */
+#define ACPI_MEM_NOT_ALLOCATED  0
+#define ACPI_MEM_ALLOCATED      1
+#define ACPI_MEM_MAPPED         2
+
+/* Definitions for the Flags bitfield member of struct acpi_table_support */
+
+#define ACPI_TABLE_SINGLE       0x00
+#define ACPI_TABLE_MULTIPLE     0x01
+#define ACPI_TABLE_EXECUTABLE   0x02
+
+#define ACPI_TABLE_ROOT         0x00
+#define ACPI_TABLE_PRIMARY      0x10
+#define ACPI_TABLE_SECONDARY    0x20
+#define ACPI_TABLE_ALL          0x30
+#define ACPI_TABLE_TYPE_MASK    0x30
+
+/* Data about each known table type */
+
+struct acpi_table_support
+{
+	char                            *name;
+	char                            *signature;
+	void                            **global_ptr;
+	u8                              sig_length;
+	u8                              flags;
+};
+
+
+/*
+ * Get the ACPI version-specific tables
+ */
+#include "actbl1.h"   /* Acpi 1.0 table definitions */
+#include "actbl2.h"   /* Acpi 2.0 table definitions */
+
+extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
+			    * needed for certain workarounds */
+
+#pragma pack(1)
+/*
+ * High performance timer
+ */
+struct hpet_table
+{
+	ACPI_TABLE_HEADER_DEF
+	u32                             hardware_id;
+	struct acpi_generic_address     base_address;
+	u8                              hpet_number;
+	u16                             clock_tick;
+	u8                              attributes;
+};
+
+#pragma pack()
+
+#endif /* __ACTBL_H__ */
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
new file mode 100644
index 000000000000..33de5f4d2ccc
--- /dev/null
+++ b/include/acpi/actbl1.h
@@ -0,0 +1,136 @@
+/******************************************************************************
+ *
+ * Name: actbl1.h - ACPI 1.0 tables
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL1_H__
+#define __ACTBL1_H__
+
+#pragma pack(1)
+
+/*
+ * ACPI 1.0 Root System Description Table (RSDT)
+ */
+struct rsdt_descriptor_rev1
+{
+	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+	u32                             table_offset_entry [1]; /* Array of pointers to other */
+			 /* ACPI tables */
+};
+
+
+/*
+ * ACPI 1.0 Firmware ACPI Control Structure (FACS)
+ */
+struct facs_descriptor_rev1
+{
+	char                            signature[4];           /* ACPI Signature */
+	u32                             length;                 /* Length of structure, in bytes */
+	u32                             hardware_signature;     /* Hardware configuration signature */
+	u32                             firmware_waking_vector; /* ACPI OS waking vector */
+	u32                             global_lock;            /* Global Lock */
+	u32                             S4bios_f        : 1;    /* Indicates if S4BIOS support is present */
+	u32                             reserved1       : 31;   /* Must be 0 */
+	u8                              resverved3 [40];        /* Reserved - must be zero */
+};
+
+
+/*
+ * ACPI 1.0 Fixed ACPI Description Table (FADT)
+ */
+struct fadt_descriptor_rev1
+{
+	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+	u32                             firmware_ctrl;          /* Physical address of FACS */
+	u32                             dsdt;                   /* Physical address of DSDT */
+	u8                              model;                  /* System Interrupt Model */
+	u8                              reserved1;              /* Reserved */
+	u16                             sci_int;                /* System vector of SCI interrupt */
+	u32                             smi_cmd;                /* Port address of SMI command port */
+	u8                              acpi_enable;            /* Value to write to smi_cmd to enable ACPI */
+	u8                              acpi_disable;           /* Value to write to smi_cmd to disable ACPI */
+	u8                              S4bios_req;             /* Value to write to SMI CMD to enter S4BIOS state */
+	u8                              reserved2;              /* Reserved - must be zero */
+	u32                             pm1a_evt_blk;           /* Port address of Power Mgt 1a acpi_event Reg Blk */
+	u32                             pm1b_evt_blk;           /* Port address of Power Mgt 1b acpi_event Reg Blk */
+	u32                             pm1a_cnt_blk;           /* Port address of Power Mgt 1a Control Reg Blk */
+	u32                             pm1b_cnt_blk;           /* Port address of Power Mgt 1b Control Reg Blk */
+	u32                             pm2_cnt_blk;            /* Port address of Power Mgt 2 Control Reg Blk */
+	u32                             pm_tmr_blk;             /* Port address of Power Mgt Timer Ctrl Reg Blk */
+	u32                             gpe0_blk;               /* Port addr of General Purpose acpi_event 0 Reg Blk */
+	u32                             gpe1_blk;               /* Port addr of General Purpose acpi_event 1 Reg Blk */
+	u8                              pm1_evt_len;            /* Byte length of ports at pm1_x_evt_blk */
+	u8                              pm1_cnt_len;            /* Byte length of ports at pm1_x_cnt_blk */
+	u8                              pm2_cnt_len;            /* Byte Length of ports at pm2_cnt_blk */
+	u8                              pm_tm_len;              /* Byte Length of ports at pm_tm_blk */
+	u8                              gpe0_blk_len;           /* Byte Length of ports at gpe0_blk */
+	u8                              gpe1_blk_len;           /* Byte Length of ports at gpe1_blk */
+	u8                              gpe1_base;              /* Offset in gpe model where gpe1 events start */
+	u8                              reserved3;              /* Reserved */
+	u16                             plvl2_lat;              /* Worst case HW latency to enter/exit C2 state */
+	u16                             plvl3_lat;              /* Worst case HW latency to enter/exit C3 state */
+	u16                             flush_size;             /* Size of area read to flush caches */
+	u16                             flush_stride;           /* Stride used in flushing caches */
+	u8                              duty_offset;            /* Bit location of duty cycle field in p_cnt reg */
+	u8                              duty_width;             /* Bit width of duty cycle field in p_cnt reg */
+	u8                              day_alrm;               /* Index to day-of-month alarm in RTC CMOS RAM */
+	u8                              mon_alrm;               /* Index to month-of-year alarm in RTC CMOS RAM */
+	u8                              century;                /* Index to century in RTC CMOS RAM */
+	u8                              reserved4;              /* Reserved */
+	u8                              reserved4a;             /* Reserved */
+	u8                              reserved4b;             /* Reserved */
+	u32                             wb_invd         : 1;    /* The wbinvd instruction works properly */
+	u32                             wb_invd_flush   : 1;    /* The wbinvd flushes but does not invalidate */
+	u32                             proc_c1         : 1;    /* All processors support C1 state */
+	u32                             plvl2_up        : 1;    /* C2 state works on MP system */
+	u32                             pwr_button      : 1;    /* Power button is handled as a generic feature */
+	u32                             sleep_button    : 1;    /* Sleep button is handled as a generic feature, or not present */
+	u32                             fixed_rTC       : 1;    /* RTC wakeup stat not in fixed register space */
+	u32                             rtcs4           : 1;    /* RTC wakeup stat not possible from S4 */
+	u32                             tmr_val_ext     : 1;    /* The tmr_val width is 32 bits (0 = 24 bits) */
+	u32                             reserved5       : 23;   /* Reserved - must be zero */
+};
+
+#pragma pack()
+
+#endif /* __ACTBL1_H__ */
+
+
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
new file mode 100644
index 000000000000..e1729c967e05
--- /dev/null
+++ b/include/acpi/actbl2.h
@@ -0,0 +1,289 @@
+/******************************************************************************
+ *
+ * Name: actbl2.h - ACPI Specification Revision 2.0 Tables
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL2_H__
+#define __ACTBL2_H__
+
+/*
+ * Prefered Power Management Profiles
+ */
+#define PM_UNSPECIFIED                  0
+#define PM_DESKTOP                      1
+#define PM_MOBILE                       2
+#define PM_WORKSTATION                  3
+#define PM_ENTERPRISE_SERVER            4
+#define PM_SOHO_SERVER                  5
+#define PM_APPLIANCE_PC                 6
+
+/*
+ * ACPI Boot Arch Flags
+ */
+#define BAF_LEGACY_DEVICES              0x0001
+#define BAF_8042_KEYBOARD_CONTROLLER    0x0002
+
+#define FADT2_REVISION_ID               3
+#define FADT2_MINUS_REVISION_ID         2
+
+
+#pragma pack(1)
+
+/*
+ * ACPI 2.0 Root System Description Table (RSDT)
+ */
+struct rsdt_descriptor_rev2
+{
+	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+	u32                             table_offset_entry [1]; /* Array of pointers to  */
+			 /* ACPI table headers */
+};
+
+
+/*
+ * ACPI 2.0 Extended System Description Table (XSDT)
+ */
+struct xsdt_descriptor_rev2
+{
+	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+	u64                             table_offset_entry [1]; /* Array of pointers to  */
+			 /* ACPI table headers */
+};
+
+
+/*
+ * ACPI 2.0 Firmware ACPI Control Structure (FACS)
+ */
+struct facs_descriptor_rev2
+{
+	char                            signature[4];           /* ACPI signature */
+	u32                             length;                 /* Length of structure, in bytes */
+	u32                             hardware_signature;     /* Hardware configuration signature */
+	u32                             firmware_waking_vector; /* 32bit physical address of the Firmware Waking Vector. */
+	u32                             global_lock;            /* Global Lock used to synchronize access to shared hardware resources */
+	u32                             S4bios_f        : 1;    /* S4Bios_f - Indicates if S4BIOS support is present */
+	u32                             reserved1       : 31;   /* Must be 0 */
+	u64                             xfirmware_waking_vector; /* 64bit physical address of the Firmware Waking Vector. */
+	u8                              version;                /* Version of this table */
+	u8                              reserved3 [31];         /* Reserved - must be zero */
+};
+
+
+/*
+ * ACPI 2.0+ Generic Address Structure (GAS)
+ */
+struct acpi_generic_address
+{
+	u8                              address_space_id;       /* Address space where struct or register exists. */
+	u8                              register_bit_width;     /* Size in bits of given register */
+	u8                              register_bit_offset;    /* Bit offset within the register */
+	u8                              access_width;           /* Minimum Access size (ACPI 3.0) */
+	u64                             address;                /* 64-bit address of struct or register */
+};
+
+
+#define FADT_REV2_COMMON \
+	u32                             V1_firmware_ctrl;   /* 32-bit physical address of FACS */ \
+	u32                             V1_dsdt;            /* 32-bit physical address of DSDT */ \
+	u8                              reserved1;          /* System Interrupt Model isn't used in ACPI 2.0*/ \
+	u8                              prefer_PM_profile;  /* Conveys preferred power management profile to OSPM. */ \
+	u16                             sci_int;            /* System vector of SCI interrupt */ \
+	u32                             smi_cmd;            /* Port address of SMI command port */ \
+	u8                              acpi_enable;        /* Value to write to smi_cmd to enable ACPI */ \
+	u8                              acpi_disable;       /* Value to write to smi_cmd to disable ACPI */ \
+	u8                              S4bios_req;         /* Value to write to SMI CMD to enter S4BIOS state */ \
+	u8                              pstate_cnt;         /* Processor performance state control*/ \
+	u32                             V1_pm1a_evt_blk;    /* Port address of Power Mgt 1a acpi_event Reg Blk */ \
+	u32                             V1_pm1b_evt_blk;    /* Port address of Power Mgt 1b acpi_event Reg Blk */ \
+	u32                             V1_pm1a_cnt_blk;    /* Port address of Power Mgt 1a Control Reg Blk */ \
+	u32                             V1_pm1b_cnt_blk;    /* Port address of Power Mgt 1b Control Reg Blk */ \
+	u32                             V1_pm2_cnt_blk;     /* Port address of Power Mgt 2 Control Reg Blk */ \
+	u32                             V1_pm_tmr_blk;      /* Port address of Power Mgt Timer Ctrl Reg Blk */ \
+	u32                             V1_gpe0_blk;        /* Port addr of General Purpose acpi_event 0 Reg Blk */ \
+	u32                             V1_gpe1_blk;        /* Port addr of General Purpose acpi_event 1 Reg Blk */ \
+	u8                              pm1_evt_len;        /* Byte length of ports at pm1_x_evt_blk */ \
+	u8                              pm1_cnt_len;        /* Byte length of ports at pm1_x_cnt_blk */ \
+	u8                              pm2_cnt_len;        /* Byte Length of ports at pm2_cnt_blk */ \
+	u8                              pm_tm_len;          /* Byte Length of ports at pm_tm_blk */ \
+	u8                              gpe0_blk_len;       /* Byte Length of ports at gpe0_blk */ \
+	u8                              gpe1_blk_len;       /* Byte Length of ports at gpe1_blk */ \
+	u8                              gpe1_base;          /* Offset in gpe model where gpe1 events start */ \
+	u8                              cst_cnt;            /* Support for the _CST object and C States change notification.*/ \
+	u16                             plvl2_lat;          /* Worst case HW latency to enter/exit C2 state */ \
+	u16                             plvl3_lat;          /* Worst case HW latency to enter/exit C3 state */ \
+	u16                             flush_size;         /* Number of flush strides that need to be read */ \
+	u16                             flush_stride;       /* Processor's memory cache line width, in bytes */ \
+	u8                              duty_offset;        /* Processor's duty cycle index in processor's P_CNT reg*/ \
+	u8                              duty_width;         /* Processor's duty cycle value bit width in P_CNT register.*/ \
+	u8                              day_alrm;           /* Index to day-of-month alarm in RTC CMOS RAM */ \
+	u8                              mon_alrm;           /* Index to month-of-year alarm in RTC CMOS RAM */ \
+	u8                              century;            /* Index to century in RTC CMOS RAM */ \
+	u16                             iapc_boot_arch;     /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/
+
+/*
+ * ACPI 2.0+ Fixed ACPI Description Table (FADT)
+ */
+struct fadt_descriptor_rev2
+{
+	ACPI_TABLE_HEADER_DEF                       /* ACPI common table header */
+	FADT_REV2_COMMON
+	u8                              reserved2;          /* Reserved */
+	u32                             wb_invd     : 1;    /* The wbinvd instruction works properly */
+	u32                             wb_invd_flush : 1;  /* The wbinvd flushes but does not invalidate */
+	u32                             proc_c1     : 1;    /* All processors support C1 state */
+	u32                             plvl2_up    : 1;    /* C2 state works on MP system */
+	u32                             pwr_button  : 1;    /* Power button is handled as a generic feature */
+	u32                             sleep_button : 1;   /* Sleep button is handled as a generic feature, or not present */
+	u32                             fixed_rTC   : 1;    /* RTC wakeup stat not in fixed register space */
+	u32                             rtcs4       : 1;    /* RTC wakeup stat not possible from S4 */
+	u32                             tmr_val_ext : 1;    /* Indicates tmr_val is 32 bits 0=24-bits */
+	u32                             dock_cap    : 1;    /* Supports Docking */
+	u32                             reset_reg_sup : 1;  /* Indicates system supports system reset via the FADT RESET_REG */
+	u32                             sealed_case : 1;    /* Indicates system has no internal expansion capabilities and case is sealed */
+	u32                             headless    : 1;    /* Indicates system does not have local video capabilities or local input devices */
+	u32                             cpu_sw_sleep : 1;   /* Indicates to OSPM that a processor native instruction */
+			   /* must be executed after writing the SLP_TYPx register */
+	/* ACPI 3.0 flag bits */
+
+	u32                             pci_exp_wak                         : 1; /* System supports PCIEXP_WAKE (STS/EN) bits */
+	u32                             use_platform_clock                  : 1; /* OSPM should use platform-provided timer */
+	u32                             S4rtc_sts_valid                     : 1; /* Contents of RTC_STS valid after S4 wake */
+	u32                             remote_power_on_capable             : 1; /* System is compatible with remote power on */
+	u32                             force_apic_cluster_model            : 1; /* All local APICs must use cluster model */
+	u32                             force_apic_physical_destination_mode : 1; /* all local x_aPICs must use physical dest mode */
+	u32                             reserved6                           : 12;/* Reserved - must be zero */
+
+	struct acpi_generic_address     reset_register;     /* Reset register address in GAS format */
+	u8                              reset_value;        /* Value to write to the reset_register port to reset the system */
+	u8                              reserved7[3];       /* These three bytes must be zero */
+	u64                             xfirmware_ctrl;     /* 64-bit physical address of FACS */
+	u64                             Xdsdt;              /* 64-bit physical address of DSDT */
+	struct acpi_generic_address     xpm1a_evt_blk;      /* Extended Power Mgt 1a acpi_event Reg Blk address */
+	struct acpi_generic_address     xpm1b_evt_blk;      /* Extended Power Mgt 1b acpi_event Reg Blk address */
+	struct acpi_generic_address     xpm1a_cnt_blk;      /* Extended Power Mgt 1a Control Reg Blk address */
+	struct acpi_generic_address     xpm1b_cnt_blk;      /* Extended Power Mgt 1b Control Reg Blk address */
+	struct acpi_generic_address     xpm2_cnt_blk;       /* Extended Power Mgt 2 Control Reg Blk address */
+	struct acpi_generic_address     xpm_tmr_blk;        /* Extended Power Mgt Timer Ctrl Reg Blk address */
+	struct acpi_generic_address     xgpe0_blk;          /* Extended General Purpose acpi_event 0 Reg Blk address */
+	struct acpi_generic_address     xgpe1_blk;          /* Extended General Purpose acpi_event 1 Reg Blk address */
+};
+
+
+/* "Down-revved" ACPI 2.0 FADT descriptor */
+
+struct fadt_descriptor_rev2_minus
+{
+	ACPI_TABLE_HEADER_DEF                       /* ACPI common table header */
+	FADT_REV2_COMMON
+	u8                              reserved2;          /* Reserved */
+	u32                             flags;
+	struct acpi_generic_address     reset_register;     /* Reset register address in GAS format */
+	u8                              reset_value;        /* Value to write to the reset_register port to reset the system. */
+	u8                              reserved7[3];       /* These three bytes must be zero */
+};
+
+
+/* ECDT - Embedded Controller Boot Resources Table */
+
+struct ec_boot_resources
+{
+	ACPI_TABLE_HEADER_DEF
+	struct acpi_generic_address     ec_control;         /* Address of EC command/status register */
+	struct acpi_generic_address     ec_data;            /* Address of EC data register */
+	u32                             uid;                /* Unique ID - must be same as the EC _UID method */
+	u8                              gpe_bit;            /* The GPE for the EC */
+	u8                              ec_id[1];           /* Full namepath of the EC in the ACPI namespace */
+};
+
+
+/* SRAT - System Resource Affinity Table */
+
+struct static_resource_alloc
+{
+	u8                              type;
+	u8                              length;
+	u8                              proximity_domain_lo;
+	u8                              apic_id;
+	u32                             enabled         :1;
+	u32                             reserved3       :31;
+	u8                              local_sapic_eid;
+	u8                              proximity_domain_hi[3];
+	u32                             reserved4;
+};
+
+struct memory_affinity
+{
+	u8                              type;
+	u8                              length;
+	u32                             proximity_domain;
+	u16                             reserved3;
+	u64                             base_address;
+	u64                             address_length;
+	u32                             reserved4;
+	u32                             enabled         :1;
+	u32                             hot_pluggable   :1;
+	u32                             non_volatile    :1;
+	u32                             reserved5       :29;
+	u64                             reserved6;
+};
+
+struct system_resource_affinity
+{
+	ACPI_TABLE_HEADER_DEF
+	u32                             reserved1;          /* Must be value '1' */
+	u64                             reserved2;
+};
+
+
+/* SLIT - System Locality Distance Information Table */
+
+struct system_locality_info
+{
+	ACPI_TABLE_HEADER_DEF
+	u64                             locality_count;
+	u8                              entry[1][1];
+};
+
+
+#pragma pack()
+
+#endif /* __ACTBL2_H__ */
+
diff --git a/include/acpi/actbl71.h b/include/acpi/actbl71.h
new file mode 100644
index 000000000000..7b4fb44261f3
--- /dev/null
+++ b/include/acpi/actbl71.h
@@ -0,0 +1,144 @@
+/******************************************************************************
+ *
+ * Name: actbl71.h - IA-64 Extensions to the ACPI Spec Rev. 0.71
+ *                   This file includes tables specific to this
+ *                   specification revision.
+ *
+ *****************************************************************************/
+
+/*
+ *  Copyright (C) 2000 - 2003, R. Byron Moore
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ACTBL71_H__
+#define __ACTBL71_H__
+
+
+/* 0.71 FADT address_space data item bitmasks defines */
+/* If the associated bit is zero then it is in memory space else in io space */
+
+#define SMI_CMD_ADDRESS_SPACE       0x01
+#define PM1_BLK_ADDRESS_SPACE       0x02
+#define PM2_CNT_BLK_ADDRESS_SPACE   0x04
+#define PM_TMR_BLK_ADDRESS_SPACE    0x08
+#define GPE0_BLK_ADDRESS_SPACE      0x10
+#define GPE1_BLK_ADDRESS_SPACE      0x20
+
+/* Only for clarity in declarations */
+
+typedef u64                         IO_ADDRESS;
+
+
+#pragma pack(1)
+struct  /* Root System Descriptor Pointer */
+{
+	NATIVE_CHAR             signature [8];          /* contains "RSD PTR " */
+	u8                              checksum;               /* to make sum of struct == 0 */
+	NATIVE_CHAR             oem_id [6];             /* OEM identification */
+	u8                              reserved;               /* Must be 0 for 1.0, 2 for 2.0 */
+	u64                             rsdt_physical_address;  /* 64-bit physical address of RSDT */
+};
+
+
+/*****************************************/
+/* IA64 Extensions to ACPI Spec Rev 0.71 */
+/* for the Root System Description Table */
+/*****************************************/
+struct
+{
+	struct acpi_table_header    header;                 /* Table header */
+	u32                         reserved_pad;           /* IA64 alignment, must be 0 */
+	u64                         table_offset_entry [1]; /* Array of pointers to other */
+			   /* tables' headers */
+};
+
+
+/*******************************************/
+/* IA64 Extensions to ACPI Spec Rev 0.71   */
+/* for the Firmware ACPI Control Structure */
+/*******************************************/
+struct
+{
+	NATIVE_CHAR         signature[4];         /* signature "FACS" */
+	u32                         length;               /* length of structure, in bytes */
+	u32                         hardware_signature;   /* hardware configuration signature */
+	u32                         reserved4;            /* must be 0 */
+	u64                         firmware_waking_vector; /* ACPI OS waking vector */
+	u64                         global_lock;          /* Global Lock */
+	u32                         S4bios_f      : 1;    /* Indicates if S4BIOS support is present */
+	u32                         reserved1     : 31;   /* must be 0 */
+	u8                          reserved3 [28];       /* reserved - must be zero */
+};
+
+
+/******************************************/
+/* IA64 Extensions to ACPI Spec Rev 0.71  */
+/* for the Fixed ACPI Description Table   */
+/******************************************/
+struct
+{
+	struct acpi_table_header    header;             /* table header */
+	u32                         reserved_pad;       /* IA64 alignment, must be 0 */
+	u64                         firmware_ctrl;      /* 64-bit Physical address of FACS */
+	u64                         dsdt;               /* 64-bit Physical address of DSDT */
+	u8                          model;              /* System Interrupt Model */
+	u8                          address_space;      /* Address Space Bitmask */
+	u16                         sci_int;            /* System vector of SCI interrupt */
+	u8                          acpi_enable;        /* value to write to smi_cmd to enable ACPI */
+	u8                          acpi_disable;       /* value to write to smi_cmd to disable ACPI */
+	u8                          S4bios_req;         /* Value to write to SMI CMD to enter S4BIOS state */
+	u8                          reserved2;          /* reserved - must be zero */
+	u64                         smi_cmd;            /* Port address of SMI command port */
+	u64                         pm1a_evt_blk;       /* Port address of Power Mgt 1a acpi_event Reg Blk */
+	u64                         pm1b_evt_blk;       /* Port address of Power Mgt 1b acpi_event Reg Blk */
+	u64                         pm1a_cnt_blk;       /* Port address of Power Mgt 1a Control Reg Blk */
+	u64                         pm1b_cnt_blk;       /* Port address of Power Mgt 1b Control Reg Blk */
+	u64                         pm2_cnt_blk;        /* Port address of Power Mgt 2 Control Reg Blk */
+	u64                         pm_tmr_blk;         /* Port address of Power Mgt Timer Ctrl Reg Blk */
+	u64                         gpe0_blk;           /* Port addr of General Purpose acpi_event 0 Reg Blk */
+	u64                         gpe1_blk;           /* Port addr of General Purpose acpi_event 1 Reg Blk */
+	u8                          pm1_evt_len;        /* Byte length of ports at pm1_x_evt_blk */
+	u8                          pm1_cnt_len;        /* Byte length of ports at pm1_x_cnt_blk */
+	u8                          pm2_cnt_len;        /* Byte Length of ports at pm2_cnt_blk */
+	u8                          pm_tm_len;          /* Byte Length of ports at pm_tm_blk */
+	u8                          gpe0_blk_len;       /* Byte Length of ports at gpe0_blk */
+	u8                          gpe1_blk_len;       /* Byte Length of ports at gpe1_blk */
+	u8                          gpe1_base;          /* offset in gpe model where gpe1 events start */
+	u8                          reserved3;          /* reserved */
+	u16                         plvl2_lat;          /* worst case HW latency to enter/exit C2 state */
+	u16                         plvl3_lat;          /* worst case HW latency to enter/exit C3 state */
+	u8                          day_alrm;           /* index to day-of-month alarm in RTC CMOS RAM */
+	u8                          mon_alrm;           /* index to month-of-year alarm in RTC CMOS RAM */
+	u8                          century;            /* index to century in RTC CMOS RAM */
+	u8                          reserved4;          /* reserved */
+	u32                         flush_cash  : 1;    /* PAL_FLUSH_CACHE is correctly supported */
+	u32                         reserved5   : 1;    /* reserved - must be zero */
+	u32                         proc_c1     : 1;    /* all processors support C1 state */
+	u32                         plvl2_up    : 1;    /* C2 state works on MP system */
+	u32                         pwr_button  : 1;    /* Power button is handled as a generic feature */
+	u32                         sleep_button : 1;   /* Sleep button is handled as a generic feature, or not present */
+	u32                         fixed_rTC   : 1;    /* RTC wakeup stat not in fixed register space */
+	u32                         rtcs4       : 1;    /* RTC wakeup stat not possible from S4 */
+	u32                         tmr_val_ext : 1;    /* tmr_val is 32 bits */
+	u32                         dock_cap    : 1;    /* Supports Docking */
+	u32                         reserved6   : 22;    /* reserved - must be zero */
+};
+
+#pragma pack()
+
+#endif /* __ACTBL71_H__ */
+
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
new file mode 100644
index 000000000000..7acb550af3eb
--- /dev/null
+++ b/include/acpi/actypes.h
@@ -0,0 +1,1304 @@
+/******************************************************************************
+ *
+ * Name: actypes.h - Common data types for the entire ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTYPES_H__
+#define __ACTYPES_H__
+
+/*! [Begin] no source code translation (keep the typedefs) */
+
+
+
+/*
+ * Data type ranges
+ * Note: These macros are designed to be compiler independent as well as
+ * working around problems that some 32-bit compilers have with 64-bit
+ * constants.
+ */
+#define ACPI_UINT8_MAX                  (UINT8) (~((UINT8)  0)) /* 0xFF               */
+#define ACPI_UINT16_MAX                 (UINT16)(~((UINT16) 0)) /* 0xFFFF             */
+#define ACPI_UINT32_MAX                 (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF         */
+#define ACPI_UINT64_MAX                 (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
+#define ACPI_ASCII_MAX                  0x7F
+
+
+#ifdef DEFINE_ALTERNATE_TYPES
+/*
+ * Types used only in translated source, defined here to enable
+ * cross-platform compilation only.
+ */
+typedef int                             s32;
+typedef unsigned char                   u8;
+typedef unsigned short                  u16;
+typedef unsigned int                    u32;
+typedef COMPILER_DEPENDENT_UINT64       u64;
+
+#endif
+
+
+/*
+ * Data types - Fixed across all compilation models (16/32/64)
+ *
+ * BOOLEAN          Logical Boolean.
+ * INT8             8-bit  (1 byte) signed value
+ * UINT8            8-bit  (1 byte) unsigned value
+ * INT16            16-bit (2 byte) signed value
+ * UINT16           16-bit (2 byte) unsigned value
+ * INT32            32-bit (4 byte) signed value
+ * UINT32           32-bit (4 byte) unsigned value
+ * INT64            64-bit (8 byte) signed value
+ * UINT64           64-bit (8 byte) unsigned value
+ * ACPI_NATIVE_INT  32-bit on IA-32, 64-bit on IA-64 signed value
+ * ACPI_NATIVE_UINT 32-bit on IA-32, 64-bit on IA-64 unsigned value
+ */
+
+#ifndef ACPI_MACHINE_WIDTH
+#error ACPI_MACHINE_WIDTH not defined
+#endif
+
+#if ACPI_MACHINE_WIDTH == 64
+
+/*! [Begin] no source code translation (keep the typedefs) */
+
+/*
+ * 64-bit type definitions
+ */
+typedef unsigned char                   UINT8;
+typedef unsigned char                   BOOLEAN;
+typedef unsigned short                  UINT16;
+typedef int                             INT32;
+typedef unsigned int                    UINT32;
+typedef COMPILER_DEPENDENT_INT64        INT64;
+typedef COMPILER_DEPENDENT_UINT64       UINT64;
+
+/*! [End] no source code translation !*/
+
+typedef s64                                     acpi_native_int;
+typedef u64                                     acpi_native_uint;
+
+typedef u64                                     acpi_table_ptr;
+typedef u64                                     acpi_io_address;
+typedef u64                                     acpi_physical_address;
+typedef u64                                     acpi_size;
+
+#define ALIGNED_ADDRESS_BOUNDARY        0x00000008      /* No hardware alignment support in IA64 */
+#define ACPI_USE_NATIVE_DIVIDE                          /* Native 64-bit integer support */
+#define ACPI_MAX_PTR                    ACPI_UINT64_MAX
+#define ACPI_SIZE_MAX                   ACPI_UINT64_MAX
+
+
+#elif ACPI_MACHINE_WIDTH == 16
+
+/*! [Begin] no source code translation (keep the typedefs) */
+
+/*
+ * 16-bit type definitions
+ */
+typedef unsigned char                   UINT8;
+typedef unsigned char                   BOOLEAN;
+typedef unsigned int                    UINT16;
+typedef long                            INT32;
+typedef int                             INT16;
+typedef unsigned long                   UINT32;
+
+struct
+{
+	UINT32                                  Lo;
+	UINT32                                  Hi;
+};
+
+/*! [End] no source code translation !*/
+
+typedef u16                                     acpi_native_uint;
+typedef s16                                     acpi_native_int;
+
+typedef u32                                     acpi_table_ptr;
+typedef u32                                     acpi_io_address;
+typedef char                                    *acpi_physical_address;
+typedef u16                                     acpi_size;
+
+#define ALIGNED_ADDRESS_BOUNDARY        0x00000002
+#define ACPI_MISALIGNED_TRANSFERS
+#define ACPI_USE_NATIVE_DIVIDE                          /* No 64-bit integers, ok to use native divide */
+#define ACPI_MAX_PTR                    ACPI_UINT16_MAX
+#define ACPI_SIZE_MAX                   ACPI_UINT16_MAX
+
+/*
+ * (16-bit only) internal integers must be 32-bits, so
+ * 64-bit integers cannot be supported
+ */
+#define ACPI_NO_INTEGER64_SUPPORT
+
+
+#elif ACPI_MACHINE_WIDTH == 32
+
+/*! [Begin] no source code translation (keep the typedefs) */
+
+/*
+ * 32-bit type definitions (default)
+ */
+typedef unsigned char                   UINT8;
+typedef unsigned char                   BOOLEAN;
+typedef unsigned short                  UINT16;
+typedef int                             INT32;
+typedef unsigned int                    UINT32;
+typedef COMPILER_DEPENDENT_INT64        INT64;
+typedef COMPILER_DEPENDENT_UINT64       UINT64;
+
+/*! [End] no source code translation !*/
+
+typedef s32                                     acpi_native_int;
+typedef u32                                     acpi_native_uint;
+
+typedef u64                                     acpi_table_ptr;
+typedef u32                                     acpi_io_address;
+typedef u64                                     acpi_physical_address;
+typedef u32                                     acpi_size;
+
+#define ALIGNED_ADDRESS_BOUNDARY        0x00000004
+#define ACPI_MISALIGNED_TRANSFERS
+#define ACPI_MAX_PTR                    ACPI_UINT32_MAX
+#define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
+
+#else
+#error unknown ACPI_MACHINE_WIDTH
+#endif
+
+
+/*
+ * Miscellaneous common types
+ */
+typedef u16                                     UINT16_BIT;
+typedef u32                                     UINT32_BIT;
+typedef acpi_native_uint                        ACPI_PTRDIFF;
+
+/*
+ * Pointer overlays to avoid lots of typecasting for
+ * code that accepts both physical and logical pointers.
+ */
+union acpi_pointers
+{
+	acpi_physical_address               physical;
+	void                                *logical;
+	acpi_table_ptr                      value;
+};
+
+struct acpi_pointer
+{
+	u32                                 pointer_type;
+	union acpi_pointers                 pointer;
+};
+
+/* pointer_types for above */
+
+#define ACPI_PHYSICAL_POINTER           0x01
+#define ACPI_LOGICAL_POINTER            0x02
+
+/* Processor mode */
+
+#define ACPI_PHYSICAL_ADDRESSING        0x04
+#define ACPI_LOGICAL_ADDRESSING         0x08
+#define ACPI_MEMORY_MODE                0x0C
+
+#define ACPI_PHYSMODE_PHYSPTR           ACPI_PHYSICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
+#define ACPI_LOGMODE_PHYSPTR            ACPI_LOGICAL_ADDRESSING  | ACPI_PHYSICAL_POINTER
+#define ACPI_LOGMODE_LOGPTR             ACPI_LOGICAL_ADDRESSING  | ACPI_LOGICAL_POINTER
+
+
+/*
+ * Useful defines
+ */
+#ifdef FALSE
+#undef FALSE
+#endif
+#define FALSE                           (1 == 0)
+
+#ifdef TRUE
+#undef TRUE
+#endif
+#define TRUE                            (1 == 1)
+
+#ifndef NULL
+#define NULL                            (void *) 0
+#endif
+
+
+/*
+ * Local datatypes
+ */
+typedef u32                                     acpi_status;    /* All ACPI Exceptions */
+typedef u32                                     acpi_name;      /* 4-byte ACPI name */
+typedef char *                                  acpi_string;    /* Null terminated ASCII string */
+typedef void *                                  acpi_handle;    /* Actually a ptr to an Node */
+
+struct uint64_struct
+{
+	u32                                 lo;
+	u32                                 hi;
+};
+
+union uint64_overlay
+{
+	u64                                 full;
+	struct uint64_struct                part;
+};
+
+struct uint32_struct
+{
+	u32                                 lo;
+	u32                                 hi;
+};
+
+
+/*
+ * Acpi integer width. In ACPI version 1, integers are
+ * 32 bits.  In ACPI version 2, integers are 64 bits.
+ * Note that this pertains to the ACPI integer type only, not
+ * other integers used in the implementation of the ACPI CA
+ * subsystem.
+ */
+#ifdef ACPI_NO_INTEGER64_SUPPORT
+
+/* 32-bit integers only, no 64-bit support */
+
+typedef u32                                     acpi_integer;
+#define ACPI_INTEGER_MAX                ACPI_UINT32_MAX
+#define ACPI_INTEGER_BIT_SIZE           32
+#define ACPI_MAX_DECIMAL_DIGITS         10  /* 2^32 = 4,294,967,296 */
+
+#define ACPI_USE_NATIVE_DIVIDE          /* Use compiler native 32-bit divide */
+
+
+#else
+
+/* 64-bit integers */
+
+typedef u64                                     acpi_integer;
+#define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
+#define ACPI_INTEGER_BIT_SIZE           64
+#define ACPI_MAX_DECIMAL_DIGITS         20  /* 2^64 = 18,446,744,073,709,551,616 */
+
+
+#if ACPI_MACHINE_WIDTH == 64
+#define ACPI_USE_NATIVE_DIVIDE          /* Use compiler native 64-bit divide */
+#endif
+#endif
+
+#define ACPI_MAX64_DECIMAL_DIGITS       20
+#define ACPI_MAX32_DECIMAL_DIGITS       10
+#define ACPI_MAX16_DECIMAL_DIGITS        5
+#define ACPI_MAX8_DECIMAL_DIGITS         3
+
+/*
+ * Constants with special meanings
+ */
+#define ACPI_ROOT_OBJECT                (acpi_handle) ACPI_PTR_ADD (char, NULL, ACPI_MAX_PTR)
+
+
+/*
+ * Initialization sequence
+ */
+#define ACPI_FULL_INITIALIZATION        0x00
+#define ACPI_NO_ADDRESS_SPACE_INIT      0x01
+#define ACPI_NO_HARDWARE_INIT           0x02
+#define ACPI_NO_EVENT_INIT              0x04
+#define ACPI_NO_HANDLER_INIT            0x08
+#define ACPI_NO_ACPI_ENABLE             0x10
+#define ACPI_NO_DEVICE_INIT             0x20
+#define ACPI_NO_OBJECT_INIT             0x40
+
+/*
+ * Initialization state
+ */
+#define ACPI_INITIALIZED_OK             0x01
+
+/*
+ * Power state values
+ */
+#define ACPI_STATE_UNKNOWN              (u8) 0xFF
+
+#define ACPI_STATE_S0                   (u8) 0
+#define ACPI_STATE_S1                   (u8) 1
+#define ACPI_STATE_S2                   (u8) 2
+#define ACPI_STATE_S3                   (u8) 3
+#define ACPI_STATE_S4                   (u8) 4
+#define ACPI_STATE_S5                   (u8) 5
+#define ACPI_S_STATES_MAX               ACPI_STATE_S5
+#define ACPI_S_STATE_COUNT              6
+
+#define ACPI_STATE_D0                   (u8) 0
+#define ACPI_STATE_D1                   (u8) 1
+#define ACPI_STATE_D2                   (u8) 2
+#define ACPI_STATE_D3                   (u8) 3
+#define ACPI_D_STATES_MAX               ACPI_STATE_D3
+#define ACPI_D_STATE_COUNT              4
+
+#define ACPI_STATE_C0                   (u8) 0
+#define ACPI_STATE_C1                   (u8) 1
+#define ACPI_STATE_C2                   (u8) 2
+#define ACPI_STATE_C3                   (u8) 3
+#define ACPI_C_STATES_MAX               ACPI_STATE_C3
+#define ACPI_C_STATE_COUNT              4
+
+/*
+ * Sleep type invalid value
+ */
+#define ACPI_SLEEP_TYPE_MAX             0x7
+#define ACPI_SLEEP_TYPE_INVALID         0xFF
+
+/*
+ * Standard notify values
+ */
+#define ACPI_NOTIFY_BUS_CHECK           (u8) 0
+#define ACPI_NOTIFY_DEVICE_CHECK        (u8) 1
+#define ACPI_NOTIFY_DEVICE_WAKE         (u8) 2
+#define ACPI_NOTIFY_EJECT_REQUEST       (u8) 3
+#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT  (u8) 4
+#define ACPI_NOTIFY_FREQUENCY_MISMATCH  (u8) 5
+#define ACPI_NOTIFY_BUS_MODE_MISMATCH   (u8) 6
+#define ACPI_NOTIFY_POWER_FAULT         (u8) 7
+
+/*
+ *  Table types.  These values are passed to the table related APIs
+ */
+typedef u32                                     acpi_table_type;
+
+#define ACPI_TABLE_RSDP                 (acpi_table_type) 0
+#define ACPI_TABLE_DSDT                 (acpi_table_type) 1
+#define ACPI_TABLE_FADT                 (acpi_table_type) 2
+#define ACPI_TABLE_FACS                 (acpi_table_type) 3
+#define ACPI_TABLE_PSDT                 (acpi_table_type) 4
+#define ACPI_TABLE_SSDT                 (acpi_table_type) 5
+#define ACPI_TABLE_XSDT                 (acpi_table_type) 6
+#define ACPI_TABLE_MAX                  6
+#define NUM_ACPI_TABLE_TYPES            (ACPI_TABLE_MAX+1)
+
+/*
+ * Types associated with ACPI names and objects.  The first group of
+ * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
+ * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
+ * only add to the first group if the spec changes.
+ *
+ * NOTE: Types must be kept in sync with the global acpi_ns_properties
+ * and acpi_ns_type_names arrays.
+ */
+typedef u32                                     acpi_object_type;
+
+#define ACPI_TYPE_ANY                   0x00
+#define ACPI_TYPE_INTEGER               0x01  /* Byte/Word/Dword/Zero/One/Ones */
+#define ACPI_TYPE_STRING                0x02
+#define ACPI_TYPE_BUFFER                0x03
+#define ACPI_TYPE_PACKAGE               0x04  /* byte_const, multiple data_term/Constant/super_name */
+#define ACPI_TYPE_FIELD_UNIT            0x05
+#define ACPI_TYPE_DEVICE                0x06  /* Name, multiple Node */
+#define ACPI_TYPE_EVENT                 0x07
+#define ACPI_TYPE_METHOD                0x08  /* Name, byte_const, multiple Code */
+#define ACPI_TYPE_MUTEX                 0x09
+#define ACPI_TYPE_REGION                0x0A
+#define ACPI_TYPE_POWER                 0x0B  /* Name,byte_const,word_const,multi Node */
+#define ACPI_TYPE_PROCESSOR             0x0C  /* Name,byte_const,Dword_const,byte_const,multi nm_o */
+#define ACPI_TYPE_THERMAL               0x0D  /* Name, multiple Node */
+#define ACPI_TYPE_BUFFER_FIELD          0x0E
+#define ACPI_TYPE_DDB_HANDLE            0x0F
+#define ACPI_TYPE_DEBUG_OBJECT          0x10
+
+#define ACPI_TYPE_EXTERNAL_MAX          0x10
+
+/*
+ * These are object types that do not map directly to the ACPI
+ * object_type() operator. They are used for various internal purposes only.
+ * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
+ * internal types must move upwards. (There is code that depends on these
+ * values being contiguous with the external types above.)
+ */
+#define ACPI_TYPE_LOCAL_REGION_FIELD    0x11
+#define ACPI_TYPE_LOCAL_BANK_FIELD      0x12
+#define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
+#define ACPI_TYPE_LOCAL_REFERENCE       0x14  /* Arg#, Local#, Name, Debug, ref_of, Index */
+#define ACPI_TYPE_LOCAL_ALIAS           0x15
+#define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
+#define ACPI_TYPE_LOCAL_NOTIFY          0x17
+#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
+#define ACPI_TYPE_LOCAL_RESOURCE        0x19
+#define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
+#define ACPI_TYPE_LOCAL_SCOPE           0x1B  /* 1 Name, multiple object_list Nodes */
+
+#define ACPI_TYPE_NS_NODE_MAX           0x1B  /* Last typecode used within a NS Node */
+
+/*
+ * These are special object types that never appear in
+ * a Namespace node, only in an union acpi_operand_object
+ */
+#define ACPI_TYPE_LOCAL_EXTRA           0x1C
+#define ACPI_TYPE_LOCAL_DATA            0x1D
+
+#define ACPI_TYPE_LOCAL_MAX             0x1D
+
+/* All types above here are invalid */
+
+#define ACPI_TYPE_INVALID               0x1E
+#define ACPI_TYPE_NOT_FOUND             0xFF
+
+
+/*
+ * Bitmapped ACPI types.  Used internally only
+ */
+#define ACPI_BTYPE_ANY                  0x00000000
+#define ACPI_BTYPE_INTEGER              0x00000001
+#define ACPI_BTYPE_STRING               0x00000002
+#define ACPI_BTYPE_BUFFER               0x00000004
+#define ACPI_BTYPE_PACKAGE              0x00000008
+#define ACPI_BTYPE_FIELD_UNIT           0x00000010
+#define ACPI_BTYPE_DEVICE               0x00000020
+#define ACPI_BTYPE_EVENT                0x00000040
+#define ACPI_BTYPE_METHOD               0x00000080
+#define ACPI_BTYPE_MUTEX                0x00000100
+#define ACPI_BTYPE_REGION               0x00000200
+#define ACPI_BTYPE_POWER                0x00000400
+#define ACPI_BTYPE_PROCESSOR            0x00000800
+#define ACPI_BTYPE_THERMAL              0x00001000
+#define ACPI_BTYPE_BUFFER_FIELD         0x00002000
+#define ACPI_BTYPE_DDB_HANDLE           0x00004000
+#define ACPI_BTYPE_DEBUG_OBJECT         0x00008000
+#define ACPI_BTYPE_REFERENCE            0x00010000
+#define ACPI_BTYPE_RESOURCE             0x00020000
+
+#define ACPI_BTYPE_COMPUTE_DATA         (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
+
+#define ACPI_BTYPE_DATA                 (ACPI_BTYPE_COMPUTE_DATA  | ACPI_BTYPE_PACKAGE)
+#define ACPI_BTYPE_DATA_REFERENCE       (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
+#define ACPI_BTYPE_DEVICE_OBJECTS       (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
+#define ACPI_BTYPE_OBJECTS_AND_REFS     0x0001FFFF  /* ARG or LOCAL */
+#define ACPI_BTYPE_ALL_OBJECTS          0x0000FFFF
+
+/*
+ * All I/O
+ */
+#define ACPI_READ                       0
+#define ACPI_WRITE                      1
+#define ACPI_IO_MASK                    1
+
+/*
+ * Event Types: Fixed & General Purpose
+ */
+typedef u32                                     acpi_event_type;
+
+/*
+ * Fixed events
+ */
+#define ACPI_EVENT_PMTIMER              0
+#define ACPI_EVENT_GLOBAL               1
+#define ACPI_EVENT_POWER_BUTTON         2
+#define ACPI_EVENT_SLEEP_BUTTON         3
+#define ACPI_EVENT_RTC                  4
+#define ACPI_EVENT_MAX                  4
+#define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
+
+/*
+ * Event Status - Per event
+ * -------------
+ * The encoding of acpi_event_status is illustrated below.
+ * Note that a set bit (1) indicates the property is TRUE
+ * (e.g. if bit 0 is set then the event is enabled).
+ * +-------------+-+-+-+
+ * |   Bits 31:3 |2|1|0|
+ * +-------------+-+-+-+
+ *          |     | | |
+ *          |     | | +- Enabled?
+ *          |     | +--- Enabled for wake?
+ *          |     +----- Set?
+ *          +----------- <Reserved>
+ */
+typedef u32                                     acpi_event_status;
+
+#define ACPI_EVENT_FLAG_DISABLED        (acpi_event_status) 0x00
+#define ACPI_EVENT_FLAG_ENABLED         (acpi_event_status) 0x01
+#define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
+#define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
+
+/*
+ * General Purpose Events (GPE)
+ */
+#define ACPI_GPE_INVALID                0xFF
+#define ACPI_GPE_MAX                    0xFF
+#define ACPI_NUM_GPE                    256
+
+#define ACPI_GPE_ENABLE                 0
+#define ACPI_GPE_DISABLE                1
+
+
+/*
+ * GPE info flags - Per GPE
+ * +-+-+-+---+---+-+
+ * |7|6|5|4:3|2:1|0|
+ * +-+-+-+---+---+-+
+ *  | | |  |   |  |
+ *  | | |  |   |  +--- Interrupt type: Edge or Level Triggered
+ *  | | |  |   +--- Type: Wake-only, Runtime-only, or wake/runtime
+ *  | | |  +--- Type of dispatch -- to method, handler, or none
+ *  | | +--- Enabled for runtime?
+ *  | +--- Enabled for wake?
+ *  +--- System state when GPE ocurred (running/waking)
+ */
+#define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x01
+#define ACPI_GPE_LEVEL_TRIGGERED        (u8) 0x01
+#define ACPI_GPE_EDGE_TRIGGERED         (u8) 0x00
+
+#define ACPI_GPE_TYPE_MASK              (u8) 0x06
+#define ACPI_GPE_TYPE_WAKE_RUN          (u8) 0x06
+#define ACPI_GPE_TYPE_WAKE              (u8) 0x02
+#define ACPI_GPE_TYPE_RUNTIME           (u8) 0x04    /* Default */
+
+#define ACPI_GPE_DISPATCH_MASK          (u8) 0x18
+#define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x08
+#define ACPI_GPE_DISPATCH_METHOD        (u8) 0x10
+#define ACPI_GPE_DISPATCH_NOT_USED      (u8) 0x00    /* Default */
+
+#define ACPI_GPE_RUN_ENABLE_MASK        (u8) 0x20
+#define ACPI_GPE_RUN_ENABLED            (u8) 0x20
+#define ACPI_GPE_RUN_DISABLED           (u8) 0x00    /* Default */
+
+#define ACPI_GPE_WAKE_ENABLE_MASK       (u8) 0x40
+#define ACPI_GPE_WAKE_ENABLED           (u8) 0x40
+#define ACPI_GPE_WAKE_DISABLED          (u8) 0x00    /* Default */
+
+#define ACPI_GPE_ENABLE_MASK            (u8) 0x60    /* Both run/wake */
+
+#define ACPI_GPE_SYSTEM_MASK            (u8) 0x80
+#define ACPI_GPE_SYSTEM_RUNNING         (u8) 0x80
+#define ACPI_GPE_SYSTEM_WAKING          (u8) 0x00
+
+/*
+ * Flags for GPE and Lock interfaces
+ */
+#define ACPI_EVENT_WAKE_ENABLE          0x2             /* acpi_gpe_enable */
+#define ACPI_EVENT_WAKE_DISABLE         0x2             /* acpi_gpe_disable */
+
+#define ACPI_NOT_ISR                    0x1
+#define ACPI_ISR                        0x0
+
+
+/* Notify types */
+
+#define ACPI_SYSTEM_NOTIFY              0x1
+#define ACPI_DEVICE_NOTIFY              0x2
+#define ACPI_ALL_NOTIFY                 0x3
+#define ACPI_MAX_NOTIFY_HANDLER_TYPE    0x3
+
+#define ACPI_MAX_SYS_NOTIFY             0x7f
+
+
+/* Address Space (Operation Region) Types */
+
+typedef u8                                      acpi_adr_space_type;
+
+#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
+#define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
+#define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
+#define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
+#define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
+#define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
+#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
+#define ACPI_ADR_SPACE_DATA_TABLE       (acpi_adr_space_type) 7
+#define ACPI_ADR_SPACE_FIXED_HARDWARE   (acpi_adr_space_type) 127
+
+
+/*
+ * bit_register IDs
+ * These are bitfields defined within the full ACPI registers
+ */
+#define ACPI_BITREG_TIMER_STATUS                0x00
+#define ACPI_BITREG_BUS_MASTER_STATUS           0x01
+#define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
+#define ACPI_BITREG_POWER_BUTTON_STATUS         0x03
+#define ACPI_BITREG_SLEEP_BUTTON_STATUS         0x04
+#define ACPI_BITREG_RT_CLOCK_STATUS             0x05
+#define ACPI_BITREG_WAKE_STATUS                 0x06
+#define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
+
+#define ACPI_BITREG_TIMER_ENABLE                0x08
+#define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
+#define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
+#define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
+#define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
+#define ACPI_BITREG_WAKE_ENABLE                 0x0D
+#define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0E
+
+#define ACPI_BITREG_SCI_ENABLE                  0x0F
+#define ACPI_BITREG_BUS_MASTER_RLD              0x10
+#define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x11
+#define ACPI_BITREG_SLEEP_TYPE_A                0x12
+#define ACPI_BITREG_SLEEP_TYPE_B                0x13
+#define ACPI_BITREG_SLEEP_ENABLE                0x14
+
+#define ACPI_BITREG_ARB_DISABLE                 0x15
+
+#define ACPI_BITREG_MAX                         0x15
+#define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
+
+
+/*
+ * External ACPI object definition
+ */
+union acpi_object
+{
+	acpi_object_type                    type;   /* See definition of acpi_ns_type for values */
+	struct
+	{
+		acpi_object_type                    type;
+		acpi_integer                        value;      /* The actual number */
+	} integer;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 length;     /* # of bytes in string, excluding trailing null */
+		char                                *pointer;   /* points to the string value */
+	} string;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 length;     /* # of bytes in buffer */
+		u8                                  *pointer;   /* points to the buffer */
+	} buffer;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 fill1;
+		acpi_handle                         handle;     /* object reference */
+	} reference;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 count;      /* # of elements in package */
+		union acpi_object                   *elements;  /* Pointer to an array of ACPI_OBJECTs */
+	} package;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 proc_id;
+		acpi_io_address                     pblk_address;
+		u32                                 pblk_length;
+	} processor;
+
+	struct
+	{
+		acpi_object_type                    type;
+		u32                                 system_level;
+		u32                                 resource_order;
+	} power_resource;
+};
+
+
+/*
+ * List of objects, used as a parameter list for control method evaluation
+ */
+struct acpi_object_list
+{
+	u32                                 count;
+	union acpi_object                   *pointer;
+};
+
+
+/*
+ * Miscellaneous common Data Structures used by the interfaces
+ */
+#define ACPI_NO_BUFFER              0
+#define ACPI_ALLOCATE_BUFFER        (acpi_size) (-1)
+#define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (-2)
+
+struct acpi_buffer
+{
+	acpi_size                           length;         /* Length in bytes of the buffer */
+	void                                *pointer;       /* pointer to buffer */
+};
+
+
+/*
+ * name_type for acpi_get_name
+ */
+#define ACPI_FULL_PATHNAME              0
+#define ACPI_SINGLE_NAME                1
+#define ACPI_NAME_TYPE_MAX              1
+
+
+/*
+ * Structure and flags for acpi_get_system_info
+ */
+#define ACPI_SYS_MODE_UNKNOWN           0x0000
+#define ACPI_SYS_MODE_ACPI              0x0001
+#define ACPI_SYS_MODE_LEGACY            0x0002
+#define ACPI_SYS_MODES_MASK             0x0003
+
+
+/*
+ * ACPI Table Info.  One per ACPI table _type_
+ */
+struct acpi_table_info
+{
+	u32                                 count;
+};
+
+
+/*
+ * System info returned by acpi_get_system_info()
+ */
+struct acpi_system_info
+{
+	u32                                 acpi_ca_version;
+	u32                                 flags;
+	u32                                 timer_resolution;
+	u32                                 reserved1;
+	u32                                 reserved2;
+	u32                                 debug_level;
+	u32                                 debug_layer;
+	u32                                 num_table_types;
+	struct acpi_table_info              table_info [NUM_ACPI_TABLE_TYPES];
+};
+
+
+/*
+ * Types specific to the OS service interfaces
+ */
+
+typedef u32
+(ACPI_SYSTEM_XFACE *acpi_osd_handler) (
+	void                            *context);
+
+typedef void
+(ACPI_SYSTEM_XFACE *acpi_osd_exec_callback) (
+	void                            *context);
+
+/*
+ * Various handlers and callback procedures
+ */
+typedef
+u32 (*acpi_event_handler) (
+	void                                *context);
+
+typedef
+void (*acpi_notify_handler) (
+	acpi_handle                         device,
+	u32                                 value,
+	void                                *context);
+
+typedef
+void (*acpi_object_handler) (
+	acpi_handle                         object,
+	u32                                 function,
+	void                                *data);
+
+typedef
+acpi_status (*acpi_init_handler) (
+	acpi_handle                         object,
+	u32                                 function);
+
+#define ACPI_INIT_DEVICE_INI        1
+
+typedef
+acpi_status (*acpi_exception_handler) (
+	acpi_status                     aml_status,
+	acpi_name                       name,
+	u16                             opcode,
+	u32                             aml_offset,
+	void                            *context);
+
+
+/* Address Spaces (For Operation Regions) */
+
+typedef
+acpi_status (*acpi_adr_space_handler) (
+	u32                                 function,
+	acpi_physical_address               address,
+	u32                                 bit_width,
+	acpi_integer                        *value,
+	void                                *handler_context,
+	void                                *region_context);
+
+#define ACPI_DEFAULT_HANDLER        NULL
+
+
+typedef
+acpi_status (*acpi_adr_space_setup) (
+	acpi_handle                         region_handle,
+	u32                                 function,
+	void                                *handler_context,
+	void                                **region_context);
+
+#define ACPI_REGION_ACTIVATE    0
+#define ACPI_REGION_DEACTIVATE  1
+
+typedef
+acpi_status (*acpi_walk_callback) (
+	acpi_handle                         obj_handle,
+	u32                                 nesting_level,
+	void                                *context,
+	void                                **return_value);
+
+
+/* Interrupt handler return values */
+
+#define ACPI_INTERRUPT_NOT_HANDLED      0x00
+#define ACPI_INTERRUPT_HANDLED          0x01
+
+
+/* Common string version of device HIDs and UIDs */
+
+struct acpi_device_id
+{
+	char                            value[ACPI_DEVICE_ID_LENGTH];
+};
+
+/* Common string version of device CIDs */
+
+struct acpi_compatible_id
+{
+	char                            value[ACPI_MAX_CID_LENGTH];
+};
+
+struct acpi_compatible_id_list
+{
+	u32                             count;
+	u32                             size;
+	struct acpi_compatible_id       id[1];
+};
+
+
+/* Structure and flags for acpi_get_object_info */
+
+#define ACPI_VALID_STA                  0x0001
+#define ACPI_VALID_ADR                  0x0002
+#define ACPI_VALID_HID                  0x0004
+#define ACPI_VALID_UID                  0x0008
+#define ACPI_VALID_CID                  0x0010
+#define ACPI_VALID_SXDS                 0x0020
+
+
+#define ACPI_COMMON_OBJ_INFO \
+	acpi_object_type                    type;           /* ACPI object type */ \
+	acpi_name                           name            /* ACPI object Name */
+
+
+struct acpi_obj_info_header
+{
+	ACPI_COMMON_OBJ_INFO;
+};
+
+
+/* Structure returned from Get Object Info */
+
+struct acpi_device_info
+{
+	ACPI_COMMON_OBJ_INFO;
+
+	u32                                 valid;              /* Indicates which fields below are valid */
+	u32                                 current_status;     /* _STA value */
+	acpi_integer                        address;            /* _ADR value if any */
+	struct acpi_device_id               hardware_id;        /* _HID value if any */
+	struct acpi_device_id               unique_id;          /* _UID value if any */
+	u8                                  highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
+	struct acpi_compatible_id_list      compatibility_id;   /* List of _CIDs if any */
+};
+
+
+/* Context structs for address space handlers */
+
+struct acpi_pci_id
+{
+	u16                                 segment;
+	u16                                 bus;
+	u16                                 device;
+	u16                                 function;
+};
+
+
+struct acpi_mem_space_context
+{
+	u32                                 length;
+	acpi_physical_address               address;
+	acpi_physical_address               mapped_physical_address;
+	u8                                  *mapped_logical_address;
+	acpi_size                           mapped_length;
+};
+
+
+/*
+ * Definitions for Resource Attributes
+ */
+
+/*
+ *  Memory Attributes
+ */
+#define ACPI_READ_ONLY_MEMORY           (u8) 0x00
+#define ACPI_READ_WRITE_MEMORY          (u8) 0x01
+
+#define ACPI_NON_CACHEABLE_MEMORY       (u8) 0x00
+#define ACPI_CACHABLE_MEMORY            (u8) 0x01
+#define ACPI_WRITE_COMBINING_MEMORY     (u8) 0x02
+#define ACPI_PREFETCHABLE_MEMORY        (u8) 0x03
+
+/*
+ *  IO Attributes
+ *  The ISA Io ranges are:     n000-n0_ffh, n400-n4_ffh, n800-n8_ffh, n_c00-n_cFFh.
+ *  The non-ISA Io ranges are: n100-n3_ffh, n500-n7_ffh, n900-n_bFfh, n_cd0-n_fFFh.
+ */
+#define ACPI_NON_ISA_ONLY_RANGES        (u8) 0x01
+#define ACPI_ISA_ONLY_RANGES            (u8) 0x02
+#define ACPI_ENTIRE_RANGE               (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES)
+
+#define ACPI_SPARSE_TRANSLATION         (u8) 0x03
+
+/*
+ *  IO Port Descriptor Decode
+ */
+#define ACPI_DECODE_10                  (u8) 0x00    /* 10-bit IO address decode */
+#define ACPI_DECODE_16                  (u8) 0x01    /* 16-bit IO address decode */
+
+/*
+ *  IRQ Attributes
+ */
+#define ACPI_EDGE_SENSITIVE             (u8) 0x00
+#define ACPI_LEVEL_SENSITIVE            (u8) 0x01
+
+#define ACPI_ACTIVE_HIGH                (u8) 0x00
+#define ACPI_ACTIVE_LOW                 (u8) 0x01
+
+#define ACPI_EXCLUSIVE                  (u8) 0x00
+#define ACPI_SHARED                     (u8) 0x01
+
+/*
+ *  DMA Attributes
+ */
+#define ACPI_COMPATIBILITY              (u8) 0x00
+#define ACPI_TYPE_A                     (u8) 0x01
+#define ACPI_TYPE_B                     (u8) 0x02
+#define ACPI_TYPE_F                     (u8) 0x03
+
+#define ACPI_NOT_BUS_MASTER             (u8) 0x00
+#define ACPI_BUS_MASTER                 (u8) 0x01
+
+#define ACPI_TRANSFER_8                 (u8) 0x00
+#define ACPI_TRANSFER_8_16              (u8) 0x01
+#define ACPI_TRANSFER_16                (u8) 0x02
+
+/*
+ * Start Dependent Functions Priority definitions
+ */
+#define ACPI_GOOD_CONFIGURATION         (u8) 0x00
+#define ACPI_ACCEPTABLE_CONFIGURATION   (u8) 0x01
+#define ACPI_SUB_OPTIMAL_CONFIGURATION  (u8) 0x02
+
+/*
+ *  16, 32 and 64-bit Address Descriptor resource types
+ */
+#define ACPI_MEMORY_RANGE               (u8) 0x00
+#define ACPI_IO_RANGE                   (u8) 0x01
+#define ACPI_BUS_NUMBER_RANGE           (u8) 0x02
+
+#define ACPI_ADDRESS_NOT_FIXED          (u8) 0x00
+#define ACPI_ADDRESS_FIXED              (u8) 0x01
+
+#define ACPI_POS_DECODE                 (u8) 0x00
+#define ACPI_SUB_DECODE                 (u8) 0x01
+
+#define ACPI_PRODUCER                   (u8) 0x00
+#define ACPI_CONSUMER                   (u8) 0x01
+
+
+/*
+ *  Structures used to describe device resources
+ */
+struct acpi_resource_irq
+{
+	u32                                 edge_level;
+	u32                                 active_high_low;
+	u32                                 shared_exclusive;
+	u32                                 number_of_interrupts;
+	u32                                 interrupts[1];
+};
+
+struct acpi_resource_dma
+{
+	u32                                 type;
+	u32                                 bus_master;
+	u32                                 transfer;
+	u32                                 number_of_channels;
+	u32                                 channels[1];
+};
+
+struct acpi_resource_start_dpf
+{
+	u32                                 compatibility_priority;
+	u32                                 performance_robustness;
+};
+
+/*
+ * END_DEPENDENT_FUNCTIONS_RESOURCE struct is not
+ * needed because it has no fields
+ */
+
+struct acpi_resource_io
+{
+	u32                                 io_decode;
+	u32                                 min_base_address;
+	u32                                 max_base_address;
+	u32                                 alignment;
+	u32                                 range_length;
+};
+
+struct acpi_resource_fixed_io
+{
+	u32                                 base_address;
+	u32                                 range_length;
+};
+
+struct acpi_resource_vendor
+{
+	u32                                 length;
+	u8                                  reserved[1];
+};
+
+struct acpi_resource_end_tag
+{
+	u8                                  checksum;
+};
+
+struct acpi_resource_mem24
+{
+	u32                                 read_write_attribute;
+	u32                                 min_base_address;
+	u32                                 max_base_address;
+	u32                                 alignment;
+	u32                                 range_length;
+};
+
+struct acpi_resource_mem32
+{
+	u32                                 read_write_attribute;
+	u32                                 min_base_address;
+	u32                                 max_base_address;
+	u32                                 alignment;
+	u32                                 range_length;
+};
+
+struct acpi_resource_fixed_mem32
+{
+	u32                                 read_write_attribute;
+	u32                                 range_base_address;
+	u32                                 range_length;
+};
+
+struct acpi_memory_attribute
+{
+	u16                                 cache_attribute;
+	u16                                 read_write_attribute;
+};
+
+struct acpi_io_attribute
+{
+	u16                                 range_attribute;
+	u16                                 translation_attribute;
+};
+
+struct acpi_bus_attribute
+{
+	u16                                 reserved1;
+	u16                                 reserved2;
+};
+
+union acpi_resource_attribute
+{
+	struct acpi_memory_attribute        memory;
+	struct acpi_io_attribute            io;
+	struct acpi_bus_attribute           bus;
+};
+
+struct acpi_resource_source
+{
+	u32                                 index;
+	u32                                 string_length;
+	char                                *string_ptr;
+};
+
+struct acpi_resource_address16
+{
+	u32                                 resource_type;
+	u32                                 producer_consumer;
+	u32                                 decode;
+	u32                                 min_address_fixed;
+	u32                                 max_address_fixed;
+	union acpi_resource_attribute       attribute;
+	u32                                 granularity;
+	u32                                 min_address_range;
+	u32                                 max_address_range;
+	u32                                 address_translation_offset;
+	u32                                 address_length;
+	struct acpi_resource_source         resource_source;
+};
+
+struct acpi_resource_address32
+{
+	u32                                 resource_type;
+	u32                                 producer_consumer;
+	u32                                 decode;
+	u32                                 min_address_fixed;
+	u32                                 max_address_fixed;
+	union acpi_resource_attribute       attribute;
+	u32                                 granularity;
+	u32                                 min_address_range;
+	u32                                 max_address_range;
+	u32                                 address_translation_offset;
+	u32                                 address_length;
+	struct acpi_resource_source         resource_source;
+};
+
+struct acpi_resource_address64
+{
+	u32                                 resource_type;
+	u32                                 producer_consumer;
+	u32                                 decode;
+	u32                                 min_address_fixed;
+	u32                                 max_address_fixed;
+	union acpi_resource_attribute       attribute;
+	u64                                 granularity;
+	u64                                 min_address_range;
+	u64                                 max_address_range;
+	u64                                 address_translation_offset;
+	u64                                 address_length;
+	u64                                 type_specific_attributes;
+	struct acpi_resource_source         resource_source;
+};
+
+struct acpi_resource_ext_irq
+{
+	u32                                 producer_consumer;
+	u32                                 edge_level;
+	u32                                 active_high_low;
+	u32                                 shared_exclusive;
+	u32                                 number_of_interrupts;
+	struct acpi_resource_source         resource_source;
+	u32                                 interrupts[1];
+};
+
+
+/* ACPI_RESOURCE_TYPEs */
+
+#define ACPI_RSTYPE_IRQ                 0
+#define ACPI_RSTYPE_DMA                 1
+#define ACPI_RSTYPE_START_DPF           2
+#define ACPI_RSTYPE_END_DPF             3
+#define ACPI_RSTYPE_IO                  4
+#define ACPI_RSTYPE_FIXED_IO            5
+#define ACPI_RSTYPE_VENDOR              6
+#define ACPI_RSTYPE_END_TAG             7
+#define ACPI_RSTYPE_MEM24               8
+#define ACPI_RSTYPE_MEM32               9
+#define ACPI_RSTYPE_FIXED_MEM32         10
+#define ACPI_RSTYPE_ADDRESS16           11
+#define ACPI_RSTYPE_ADDRESS32           12
+#define ACPI_RSTYPE_ADDRESS64           13
+#define ACPI_RSTYPE_EXT_IRQ             14
+
+typedef u32                                     acpi_resource_type;
+
+union acpi_resource_data
+{
+	struct acpi_resource_irq            irq;
+	struct acpi_resource_dma            dma;
+	struct acpi_resource_start_dpf      start_dpf;
+	struct acpi_resource_io             io;
+	struct acpi_resource_fixed_io       fixed_io;
+	struct acpi_resource_vendor         vendor_specific;
+	struct acpi_resource_end_tag        end_tag;
+	struct acpi_resource_mem24          memory24;
+	struct acpi_resource_mem32          memory32;
+	struct acpi_resource_fixed_mem32    fixed_memory32;
+	struct acpi_resource_address16      address16;
+	struct acpi_resource_address32      address32;
+	struct acpi_resource_address64      address64;
+	struct acpi_resource_ext_irq        extended_irq;
+};
+
+struct acpi_resource
+{
+	acpi_resource_type                  id;
+	u32                                 length;
+	union acpi_resource_data            data;
+};
+
+#define ACPI_RESOURCE_LENGTH                12
+#define ACPI_RESOURCE_LENGTH_NO_DATA        8       /* Id + Length fields */
+
+#define ACPI_SIZEOF_RESOURCE(type)          (ACPI_RESOURCE_LENGTH_NO_DATA + sizeof (type))
+
+#define ACPI_NEXT_RESOURCE(res)             (struct acpi_resource *)((u8 *) res + res->length)
+
+#ifdef ACPI_MISALIGNED_TRANSFERS
+#define ACPI_ALIGN_RESOURCE_SIZE(length)    (length)
+#else
+#define ACPI_ALIGN_RESOURCE_SIZE(length)    ACPI_ROUND_UP_TO_NATIVE_WORD(length)
+#endif
+
+/*
+ * END: of definitions for Resource Attributes
+ */
+
+
+struct acpi_pci_routing_table
+{
+	u32                                 length;
+	u32                                 pin;
+	acpi_integer                        address;        /* here for 64-bit alignment */
+	u32                                 source_index;
+	char                                source[4];      /* pad to 64 bits so sizeof() works in all cases */
+};
+
+/*
+ * END: of definitions for PCI Routing tables
+ */
+
+
+#endif /* __ACTYPES_H__ */
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
new file mode 100644
index 000000000000..0de26b8f1028
--- /dev/null
+++ b/include/acpi/acutils.h
@@ -0,0 +1,875 @@
+/******************************************************************************
+ *
+ * Name: acutils.h -- prototypes for the common (subsystem-wide) procedures
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ACUTILS_H
+#define _ACUTILS_H
+
+
+typedef
+acpi_status (*acpi_pkg_callback) (
+	u8                              object_type,
+	union acpi_operand_object       *source_object,
+	union acpi_generic_state        *state,
+	void                            *context);
+
+acpi_status
+acpi_ut_walk_package_tree (
+	union acpi_operand_object       *source_object,
+	void                            *target_object,
+	acpi_pkg_callback               walk_callback,
+	void                            *context);
+
+struct acpi_pkg_info
+{
+	u8                              *free_space;
+	acpi_size                       length;
+	u32                             object_space;
+	u32                             num_packages;
+};
+
+#define REF_INCREMENT       (u16) 0
+#define REF_DECREMENT       (u16) 1
+#define REF_FORCE_DELETE    (u16) 2
+
+/* acpi_ut_dump_buffer */
+
+#define DB_BYTE_DISPLAY     1
+#define DB_WORD_DISPLAY     2
+#define DB_DWORD_DISPLAY    4
+#define DB_QWORD_DISPLAY    8
+
+
+/* Global initialization interfaces */
+
+void
+acpi_ut_init_globals (
+	void);
+
+void
+acpi_ut_terminate (
+	void);
+
+
+/*
+ * ut_init - miscellaneous initialization and shutdown
+ */
+
+acpi_status
+acpi_ut_hardware_initialize (
+	void);
+
+void
+acpi_ut_subsystem_shutdown (
+	void);
+
+acpi_status
+acpi_ut_validate_fadt (
+	void);
+
+/*
+ * ut_global - Global data structures and procedures
+ */
+
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+
+char *
+acpi_ut_get_mutex_name (
+	u32                             mutex_id);
+
+#endif
+
+char *
+acpi_ut_get_type_name (
+	acpi_object_type                type);
+
+char *
+acpi_ut_get_node_name (
+	void                            *object);
+
+char *
+acpi_ut_get_descriptor_name (
+	void                            *object);
+
+char *
+acpi_ut_get_object_type_name (
+	union acpi_operand_object       *obj_desc);
+
+char *
+acpi_ut_get_region_name (
+	u8                              space_id);
+
+char *
+acpi_ut_get_event_name (
+	u32                             event_id);
+
+char
+acpi_ut_hex_to_ascii_char (
+	acpi_integer                    integer,
+	u32                             position);
+
+u8
+acpi_ut_valid_object_type (
+	acpi_object_type                type);
+
+acpi_owner_id
+acpi_ut_allocate_owner_id (
+	u32                             id_type);
+
+
+/*
+ * ut_clib - Local implementations of C library functions
+ */
+
+#ifndef ACPI_USE_SYSTEM_CLIBRARY
+
+acpi_size
+acpi_ut_strlen (
+	const char                      *string);
+
+char *
+acpi_ut_strcpy (
+	char                            *dst_string,
+	const char                      *src_string);
+
+char *
+acpi_ut_strncpy (
+	char                            *dst_string,
+	const char                      *src_string,
+	acpi_size                       count);
+
+int
+acpi_ut_memcmp (
+	const char                      *buffer1,
+	const char                      *buffer2,
+	acpi_size                       count);
+
+int
+acpi_ut_strncmp (
+	const char                      *string1,
+	const char                      *string2,
+	acpi_size                       count);
+
+int
+acpi_ut_strcmp (
+	const char                      *string1,
+	const char                      *string2);
+
+char *
+acpi_ut_strcat (
+	char                            *dst_string,
+	const char                      *src_string);
+
+char *
+acpi_ut_strncat (
+	char                            *dst_string,
+	const char                      *src_string,
+	acpi_size                       count);
+
+u32
+acpi_ut_strtoul (
+	const char                      *string,
+	char                            **terminator,
+	u32                             base);
+
+char *
+acpi_ut_strstr (
+	char                            *string1,
+	char                            *string2);
+
+void *
+acpi_ut_memcpy (
+	void                            *dest,
+	const void                      *src,
+	acpi_size                       count);
+
+void *
+acpi_ut_memset (
+	void                            *dest,
+	acpi_native_uint                value,
+	acpi_size                       count);
+
+int
+acpi_ut_to_upper (
+	int                             c);
+
+int
+acpi_ut_to_lower (
+	int                             c);
+
+extern const u8 _acpi_ctype[];
+
+#define _ACPI_XA     0x00    /* extra alphabetic - not supported */
+#define _ACPI_XS     0x40    /* extra space */
+#define _ACPI_BB     0x00    /* BEL, BS, etc. - not supported */
+#define _ACPI_CN     0x20    /* CR, FF, HT, NL, VT */
+#define _ACPI_DI     0x04    /* '0'-'9' */
+#define _ACPI_LO     0x02    /* 'a'-'z' */
+#define _ACPI_PU     0x10    /* punctuation */
+#define _ACPI_SP     0x08    /* space */
+#define _ACPI_UP     0x01    /* 'A'-'Z' */
+#define _ACPI_XD     0x80    /* '0'-'9', 'A'-'F', 'a'-'f' */
+
+#define ACPI_IS_DIGIT(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_DI))
+#define ACPI_IS_SPACE(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_SP))
+#define ACPI_IS_XDIGIT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_XD))
+#define ACPI_IS_UPPER(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_UP))
+#define ACPI_IS_LOWER(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO))
+#define ACPI_IS_PRINT(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
+#define ACPI_IS_ALPHA(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
+#define ACPI_IS_ASCII(c)  ((c) < 0x80)
+
+#endif /* ACPI_USE_SYSTEM_CLIBRARY */
+
+/*
+ * ut_copy - Object construction and conversion interfaces
+ */
+
+acpi_status
+acpi_ut_build_simple_object(
+	union acpi_operand_object       *obj,
+	union acpi_object               *user_obj,
+	u8                              *data_space,
+	u32                             *buffer_space_used);
+
+acpi_status
+acpi_ut_build_package_object (
+	union acpi_operand_object       *obj,
+	u8                              *buffer,
+	u32                             *space_used);
+
+acpi_status
+acpi_ut_copy_ielement_to_eelement (
+	u8                              object_type,
+	union acpi_operand_object       *source_object,
+	union acpi_generic_state        *state,
+	void                            *context);
+
+acpi_status
+acpi_ut_copy_ielement_to_ielement (
+	u8                              object_type,
+	union acpi_operand_object       *source_object,
+	union acpi_generic_state        *state,
+	void                            *context);
+
+acpi_status
+acpi_ut_copy_iobject_to_eobject (
+	union acpi_operand_object       *obj,
+	struct acpi_buffer              *ret_buffer);
+
+acpi_status
+acpi_ut_copy_esimple_to_isimple(
+	union acpi_object               *user_obj,
+	union acpi_operand_object       **return_obj);
+
+acpi_status
+acpi_ut_copy_eobject_to_iobject (
+	union acpi_object               *obj,
+	union acpi_operand_object       **internal_obj);
+
+acpi_status
+acpi_ut_copy_isimple_to_isimple (
+	union acpi_operand_object       *source_obj,
+	union acpi_operand_object       *dest_obj);
+
+acpi_status
+acpi_ut_copy_ipackage_to_ipackage (
+	union acpi_operand_object       *source_obj,
+	union acpi_operand_object       *dest_obj,
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ut_copy_simple_object (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *dest_desc);
+
+acpi_status
+acpi_ut_copy_iobject_to_iobject (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       **dest_desc,
+	struct acpi_walk_state          *walk_state);
+
+
+/*
+ * ut_create - Object creation
+ */
+
+acpi_status
+acpi_ut_update_object_reference (
+	union acpi_operand_object       *object,
+	u16                             action);
+
+
+/*
+ * ut_debug - Debug interfaces
+ */
+
+void
+acpi_ut_init_stack_ptr_trace (
+	void);
+
+void
+acpi_ut_track_stack_ptr (
+	void);
+
+void
+acpi_ut_trace (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info);
+
+void
+acpi_ut_trace_ptr (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	void                            *pointer);
+
+void
+acpi_ut_trace_u32 (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	u32                             integer);
+
+void
+acpi_ut_trace_str (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	char                            *string);
+
+void
+acpi_ut_exit (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info);
+
+void
+acpi_ut_status_exit (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	acpi_status                     status);
+
+void
+acpi_ut_value_exit (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	acpi_integer                    value);
+
+void
+acpi_ut_ptr_exit (
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	u8                              *ptr);
+
+void
+acpi_ut_report_info (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id);
+
+void
+acpi_ut_report_error (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id);
+
+void
+acpi_ut_report_warning (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id);
+
+void
+acpi_ut_dump_buffer (
+	u8                              *buffer,
+	u32                             count,
+	u32                             display,
+	u32                             component_id);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_debug_print (
+	u32                             requested_debug_level,
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	char                            *format,
+	...) ACPI_PRINTF_LIKE_FUNC;
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_debug_print_raw (
+	u32                             requested_debug_level,
+	u32                             line_number,
+	struct acpi_debug_print_info    *dbg_info,
+	char                            *format,
+	...) ACPI_PRINTF_LIKE_FUNC;
+
+
+/*
+ * ut_delete - Object deletion
+ */
+
+void
+acpi_ut_delete_internal_obj (
+	union acpi_operand_object       *object);
+
+void
+acpi_ut_delete_internal_package_object (
+	union acpi_operand_object       *object);
+
+void
+acpi_ut_delete_internal_simple_object (
+	union acpi_operand_object       *object);
+
+void
+acpi_ut_delete_internal_object_list (
+	union acpi_operand_object       **obj_list);
+
+
+/*
+ * ut_eval - object evaluation
+ */
+
+/* Method name strings */
+
+#define METHOD_NAME__HID        "_HID"
+#define METHOD_NAME__CID        "_CID"
+#define METHOD_NAME__UID        "_UID"
+#define METHOD_NAME__ADR        "_ADR"
+#define METHOD_NAME__STA        "_STA"
+#define METHOD_NAME__REG        "_REG"
+#define METHOD_NAME__SEG        "_SEG"
+#define METHOD_NAME__BBN        "_BBN"
+#define METHOD_NAME__PRT        "_PRT"
+#define METHOD_NAME__CRS        "_CRS"
+#define METHOD_NAME__PRS        "_PRS"
+#define METHOD_NAME__PRW        "_PRW"
+
+
+acpi_status
+acpi_ut_osi_implementation (
+	struct acpi_walk_state          *walk_state);
+
+acpi_status
+acpi_ut_evaluate_object (
+	struct acpi_namespace_node      *prefix_node,
+	char                            *path,
+	u32                             expected_return_btypes,
+	union acpi_operand_object       **return_desc);
+
+acpi_status
+acpi_ut_evaluate_numeric_object (
+	char                            *object_name,
+	struct acpi_namespace_node      *device_node,
+	acpi_integer                    *address);
+
+acpi_status
+acpi_ut_execute_HID (
+	struct acpi_namespace_node      *device_node,
+	struct acpi_device_id           *hid);
+
+acpi_status
+acpi_ut_execute_CID (
+	struct acpi_namespace_node      *device_node,
+	struct acpi_compatible_id_list **return_cid_list);
+
+acpi_status
+acpi_ut_execute_STA (
+	struct acpi_namespace_node      *device_node,
+	u32                             *status_flags);
+
+acpi_status
+acpi_ut_execute_UID (
+	struct acpi_namespace_node      *device_node,
+	struct acpi_device_id           *uid);
+
+acpi_status
+acpi_ut_execute_sxds (
+	struct acpi_namespace_node      *device_node,
+	u8                              *highest);
+
+/*
+ * ut_mutex - mutual exclusion interfaces
+ */
+
+acpi_status
+acpi_ut_mutex_initialize (
+	void);
+
+void
+acpi_ut_mutex_terminate (
+	void);
+
+acpi_status
+acpi_ut_create_mutex (
+	acpi_mutex_handle               mutex_id);
+
+acpi_status
+acpi_ut_delete_mutex (
+	acpi_mutex_handle               mutex_id);
+
+acpi_status
+acpi_ut_acquire_mutex (
+	acpi_mutex_handle               mutex_id);
+
+acpi_status
+acpi_ut_release_mutex (
+	acpi_mutex_handle               mutex_id);
+
+
+/*
+ * ut_object - internal object create/delete/cache routines
+ */
+
+union acpi_operand_object    *
+acpi_ut_create_internal_object_dbg (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id,
+	acpi_object_type                type);
+
+void *
+acpi_ut_allocate_object_desc_dbg (
+	char                            *module_name,
+	u32                             line_number,
+	u32                             component_id);
+
+#define acpi_ut_create_internal_object(t) acpi_ut_create_internal_object_dbg (_THIS_MODULE,__LINE__,_COMPONENT,t)
+#define acpi_ut_allocate_object_desc()  acpi_ut_allocate_object_desc_dbg (_THIS_MODULE,__LINE__,_COMPONENT)
+
+void
+acpi_ut_delete_object_desc (
+	union acpi_operand_object       *object);
+
+u8
+acpi_ut_valid_internal_object (
+	void                            *object);
+
+union acpi_operand_object *
+acpi_ut_create_buffer_object (
+	acpi_size                       buffer_size);
+
+union acpi_operand_object *
+acpi_ut_create_string_object (
+	acpi_size                       string_size);
+
+
+/*
+ * ut_ref_cnt - Object reference count management
+ */
+
+void
+acpi_ut_add_reference (
+	union acpi_operand_object       *object);
+
+void
+acpi_ut_remove_reference (
+	union acpi_operand_object       *object);
+
+/*
+ * ut_size - Object size routines
+ */
+
+acpi_status
+acpi_ut_get_simple_object_size (
+	union acpi_operand_object       *obj,
+	acpi_size                       *obj_length);
+
+acpi_status
+acpi_ut_get_package_object_size (
+	union acpi_operand_object       *obj,
+	acpi_size                       *obj_length);
+
+acpi_status
+acpi_ut_get_object_size(
+	union acpi_operand_object       *obj,
+	acpi_size                       *obj_length);
+
+acpi_status
+acpi_ut_get_element_length (
+	u8                              object_type,
+	union acpi_operand_object       *source_object,
+	union acpi_generic_state        *state,
+	void                            *context);
+
+
+/*
+ * ut_state - Generic state creation/cache routines
+ */
+
+void
+acpi_ut_push_generic_state (
+	union acpi_generic_state        **list_head,
+	union acpi_generic_state        *state);
+
+union acpi_generic_state *
+acpi_ut_pop_generic_state (
+	union acpi_generic_state        **list_head);
+
+
+union acpi_generic_state *
+acpi_ut_create_generic_state (
+	void);
+
+struct acpi_thread_state *
+acpi_ut_create_thread_state (
+	void);
+
+union acpi_generic_state *
+acpi_ut_create_update_state (
+	union acpi_operand_object       *object,
+	u16                             action);
+
+union acpi_generic_state *
+acpi_ut_create_pkg_state (
+	void                            *internal_object,
+	void                            *external_object,
+	u16                             index);
+
+acpi_status
+acpi_ut_create_update_state_and_push (
+	union acpi_operand_object       *object,
+	u16                             action,
+	union acpi_generic_state        **state_list);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_ut_create_pkg_state_and_push (
+	void                            *internal_object,
+	void                            *external_object,
+	u16                             index,
+	union acpi_generic_state        **state_list);
+#endif
+
+union acpi_generic_state *
+acpi_ut_create_control_state (
+	void);
+
+void
+acpi_ut_delete_generic_state (
+	union acpi_generic_state        *state);
+
+#ifdef ACPI_ENABLE_OBJECT_CACHE
+void
+acpi_ut_delete_generic_state_cache (
+	void);
+
+void
+acpi_ut_delete_object_cache (
+	void);
+#endif
+
+/*
+ * utmisc
+ */
+
+void
+acpi_ut_print_string (
+	char                            *string,
+	u8                              max_length);
+
+acpi_status
+acpi_ut_divide (
+	acpi_integer                    in_dividend,
+	acpi_integer                    in_divisor,
+	acpi_integer                    *out_quotient,
+	acpi_integer                    *out_remainder);
+
+acpi_status
+acpi_ut_short_divide (
+	acpi_integer                    in_dividend,
+	u32                             divisor,
+	acpi_integer                    *out_quotient,
+	u32                             *out_remainder);
+
+u8
+acpi_ut_valid_acpi_name (
+	u32                             name);
+
+u8
+acpi_ut_valid_acpi_character (
+	char                            character);
+
+acpi_status
+acpi_ut_strtoul64 (
+	char                            *string,
+	u32                             base,
+	acpi_integer                    *ret_integer);
+
+/* Values for Base above (16=Hex, 10=Decimal) */
+
+#define ACPI_ANY_BASE        0
+
+#ifdef ACPI_FUTURE_USAGE
+char *
+acpi_ut_strupr (
+	char                            *src_string);
+#endif
+
+u8 *
+acpi_ut_get_resource_end_tag (
+	union acpi_operand_object       *obj_desc);
+
+u8
+acpi_ut_generate_checksum (
+	u8                              *buffer,
+	u32                             length);
+
+u32
+acpi_ut_dword_byte_swap (
+	u32                             value);
+
+void
+acpi_ut_set_integer_width (
+	u8                              revision);
+
+#ifdef ACPI_DEBUG_OUTPUT
+void
+acpi_ut_display_init_pathname (
+	u8                              type,
+	struct acpi_namespace_node      *obj_handle,
+	char                            *path);
+
+#endif
+
+
+/*
+ * Utalloc - memory allocation and object caching
+ */
+
+void *
+acpi_ut_acquire_from_cache (
+	u32                             list_id);
+
+void
+acpi_ut_release_to_cache (
+	u32                             list_id,
+	void                            *object);
+
+#ifdef ACPI_ENABLE_OBJECT_CACHE
+void
+acpi_ut_delete_generic_cache (
+	u32                             list_id);
+#endif
+
+acpi_status
+acpi_ut_validate_buffer (
+	struct acpi_buffer              *buffer);
+
+acpi_status
+acpi_ut_initialize_buffer (
+	struct acpi_buffer              *buffer,
+	acpi_size                       required_length);
+
+
+/* Memory allocation functions */
+
+void *
+acpi_ut_allocate (
+	acpi_size                       size,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+void *
+acpi_ut_callocate (
+	acpi_size                       size,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+void *
+acpi_ut_allocate_and_track (
+	acpi_size                       size,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+void *
+acpi_ut_callocate_and_track (
+	acpi_size                       size,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+void
+acpi_ut_free_and_track (
+	void                            *address,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+struct acpi_debug_mem_block *
+acpi_ut_find_allocation (
+	u32                             list_id,
+	void                            *allocation);
+
+acpi_status
+acpi_ut_track_allocation (
+	u32                             list_id,
+	struct acpi_debug_mem_block     *address,
+	acpi_size                       size,
+	u8                              alloc_type,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+acpi_status
+acpi_ut_remove_allocation (
+	u32                             list_id,
+	struct acpi_debug_mem_block     *address,
+	u32                             component,
+	char                            *module,
+	u32                             line);
+
+#ifdef ACPI_FUTURE_USAGE
+void
+acpi_ut_dump_allocation_info (
+	void);
+#endif
+
+void
+acpi_ut_dump_allocations (
+	u32                             component,
+	char                            *module);
+#endif
+
+
+#endif /* _ACUTILS_H */
diff --git a/include/acpi/amlcode.h b/include/acpi/amlcode.h
new file mode 100644
index 000000000000..2ec538eac58e
--- /dev/null
+++ b/include/acpi/amlcode.h
@@ -0,0 +1,518 @@
+/******************************************************************************
+ *
+ * Name: amlcode.h - Definitions for AML, as included in "definition blocks"
+ *                   Declarations and definitions contained herein are derived
+ *                   directly from the ACPI specification.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __AMLCODE_H__
+#define __AMLCODE_H__
+
+/* primary opcodes */
+
+#define AML_NULL_CHAR               (u16) 0x00
+
+#define AML_ZERO_OP                 (u16) 0x00
+#define AML_ONE_OP                  (u16) 0x01
+#define AML_UNASSIGNED              (u16) 0x02
+#define AML_ALIAS_OP                (u16) 0x06
+#define AML_NAME_OP                 (u16) 0x08
+#define AML_BYTE_OP                 (u16) 0x0a
+#define AML_WORD_OP                 (u16) 0x0b
+#define AML_DWORD_OP                (u16) 0x0c
+#define AML_STRING_OP               (u16) 0x0d
+#define AML_QWORD_OP                (u16) 0x0e     /* ACPI 2.0 */
+#define AML_SCOPE_OP                (u16) 0x10
+#define AML_BUFFER_OP               (u16) 0x11
+#define AML_PACKAGE_OP              (u16) 0x12
+#define AML_VAR_PACKAGE_OP          (u16) 0x13     /* ACPI 2.0 */
+#define AML_METHOD_OP               (u16) 0x14
+#define AML_DUAL_NAME_PREFIX        (u16) 0x2e
+#define AML_MULTI_NAME_PREFIX_OP    (u16) 0x2f
+#define AML_NAME_CHAR_SUBSEQ        (u16) 0x30
+#define AML_NAME_CHAR_FIRST         (u16) 0x41
+#define AML_OP_PREFIX               (u16) 0x5b
+#define AML_ROOT_PREFIX             (u16) 0x5c
+#define AML_PARENT_PREFIX           (u16) 0x5e
+#define AML_LOCAL_OP                (u16) 0x60
+#define AML_LOCAL0                  (u16) 0x60
+#define AML_LOCAL1                  (u16) 0x61
+#define AML_LOCAL2                  (u16) 0x62
+#define AML_LOCAL3                  (u16) 0x63
+#define AML_LOCAL4                  (u16) 0x64
+#define AML_LOCAL5                  (u16) 0x65
+#define AML_LOCAL6                  (u16) 0x66
+#define AML_LOCAL7                  (u16) 0x67
+#define AML_ARG_OP                  (u16) 0x68
+#define AML_ARG0                    (u16) 0x68
+#define AML_ARG1                    (u16) 0x69
+#define AML_ARG2                    (u16) 0x6a
+#define AML_ARG3                    (u16) 0x6b
+#define AML_ARG4                    (u16) 0x6c
+#define AML_ARG5                    (u16) 0x6d
+#define AML_ARG6                    (u16) 0x6e
+#define AML_STORE_OP                (u16) 0x70
+#define AML_REF_OF_OP               (u16) 0x71
+#define AML_ADD_OP                  (u16) 0x72
+#define AML_CONCAT_OP               (u16) 0x73
+#define AML_SUBTRACT_OP             (u16) 0x74
+#define AML_INCREMENT_OP            (u16) 0x75
+#define AML_DECREMENT_OP            (u16) 0x76
+#define AML_MULTIPLY_OP             (u16) 0x77
+#define AML_DIVIDE_OP               (u16) 0x78
+#define AML_SHIFT_LEFT_OP           (u16) 0x79
+#define AML_SHIFT_RIGHT_OP          (u16) 0x7a
+#define AML_BIT_AND_OP              (u16) 0x7b
+#define AML_BIT_NAND_OP             (u16) 0x7c
+#define AML_BIT_OR_OP               (u16) 0x7d
+#define AML_BIT_NOR_OP              (u16) 0x7e
+#define AML_BIT_XOR_OP              (u16) 0x7f
+#define AML_BIT_NOT_OP              (u16) 0x80
+#define AML_FIND_SET_LEFT_BIT_OP    (u16) 0x81
+#define AML_FIND_SET_RIGHT_BIT_OP   (u16) 0x82
+#define AML_DEREF_OF_OP             (u16) 0x83
+#define AML_CONCAT_RES_OP           (u16) 0x84     /* ACPI 2.0 */
+#define AML_MOD_OP                  (u16) 0x85     /* ACPI 2.0 */
+#define AML_NOTIFY_OP               (u16) 0x86
+#define AML_SIZE_OF_OP              (u16) 0x87
+#define AML_INDEX_OP                (u16) 0x88
+#define AML_MATCH_OP                (u16) 0x89
+#define AML_CREATE_DWORD_FIELD_OP   (u16) 0x8a
+#define AML_CREATE_WORD_FIELD_OP    (u16) 0x8b
+#define AML_CREATE_BYTE_FIELD_OP    (u16) 0x8c
+#define AML_CREATE_BIT_FIELD_OP     (u16) 0x8d
+#define AML_TYPE_OP                 (u16) 0x8e
+#define AML_CREATE_QWORD_FIELD_OP   (u16) 0x8f     /* ACPI 2.0 */
+#define AML_LAND_OP                 (u16) 0x90
+#define AML_LOR_OP                  (u16) 0x91
+#define AML_LNOT_OP                 (u16) 0x92
+#define AML_LEQUAL_OP               (u16) 0x93
+#define AML_LGREATER_OP             (u16) 0x94
+#define AML_LLESS_OP                (u16) 0x95
+#define AML_TO_BUFFER_OP            (u16) 0x96     /* ACPI 2.0 */
+#define AML_TO_DECSTRING_OP         (u16) 0x97     /* ACPI 2.0 */
+#define AML_TO_HEXSTRING_OP         (u16) 0x98     /* ACPI 2.0 */
+#define AML_TO_INTEGER_OP           (u16) 0x99     /* ACPI 2.0 */
+#define AML_TO_STRING_OP            (u16) 0x9c     /* ACPI 2.0 */
+#define AML_COPY_OP                 (u16) 0x9d     /* ACPI 2.0 */
+#define AML_MID_OP                  (u16) 0x9e     /* ACPI 2.0 */
+#define AML_CONTINUE_OP             (u16) 0x9f     /* ACPI 2.0 */
+#define AML_IF_OP                   (u16) 0xa0
+#define AML_ELSE_OP                 (u16) 0xa1
+#define AML_WHILE_OP                (u16) 0xa2
+#define AML_NOOP_OP                 (u16) 0xa3
+#define AML_RETURN_OP               (u16) 0xa4
+#define AML_BREAK_OP                (u16) 0xa5
+#define AML_BREAK_POINT_OP          (u16) 0xcc
+#define AML_ONES_OP                 (u16) 0xff
+
+/* prefixed opcodes */
+
+#define AML_EXTOP                   (u16) 0x005b
+
+
+#define AML_MUTEX_OP                (u16) 0x5b01
+#define AML_EVENT_OP                (u16) 0x5b02
+#define AML_SHIFT_RIGHT_BIT_OP      (u16) 0x5b10
+#define AML_SHIFT_LEFT_BIT_OP       (u16) 0x5b11
+#define AML_COND_REF_OF_OP          (u16) 0x5b12
+#define AML_CREATE_FIELD_OP         (u16) 0x5b13
+#define AML_LOAD_TABLE_OP           (u16) 0x5b1f     /* ACPI 2.0 */
+#define AML_LOAD_OP                 (u16) 0x5b20
+#define AML_STALL_OP                (u16) 0x5b21
+#define AML_SLEEP_OP                (u16) 0x5b22
+#define AML_ACQUIRE_OP              (u16) 0x5b23
+#define AML_SIGNAL_OP               (u16) 0x5b24
+#define AML_WAIT_OP                 (u16) 0x5b25
+#define AML_RESET_OP                (u16) 0x5b26
+#define AML_RELEASE_OP              (u16) 0x5b27
+#define AML_FROM_BCD_OP             (u16) 0x5b28
+#define AML_TO_BCD_OP               (u16) 0x5b29
+#define AML_UNLOAD_OP               (u16) 0x5b2a
+#define AML_REVISION_OP             (u16) 0x5b30
+#define AML_DEBUG_OP                (u16) 0x5b31
+#define AML_FATAL_OP                (u16) 0x5b32
+#define AML_TIMER_OP                (u16) 0x5b33     /* ACPI 3.0 */
+#define AML_REGION_OP               (u16) 0x5b80
+#define AML_FIELD_OP                (u16) 0x5b81
+#define AML_DEVICE_OP               (u16) 0x5b82
+#define AML_PROCESSOR_OP            (u16) 0x5b83
+#define AML_POWER_RES_OP            (u16) 0x5b84
+#define AML_THERMAL_ZONE_OP         (u16) 0x5b85
+#define AML_INDEX_FIELD_OP          (u16) 0x5b86
+#define AML_BANK_FIELD_OP           (u16) 0x5b87
+#define AML_DATA_REGION_OP          (u16) 0x5b88     /* ACPI 2.0 */
+
+
+/* Bogus opcodes (they are actually two separate opcodes) */
+
+#define AML_LGREATEREQUAL_OP        (u16) 0x9295
+#define AML_LLESSEQUAL_OP           (u16) 0x9294
+#define AML_LNOTEQUAL_OP            (u16) 0x9293
+
+
+/*
+ * Internal opcodes
+ * Use only "Unknown" AML opcodes, don't attempt to use
+ * any valid ACPI ASCII values (A-Z, 0-9, '-')
+ */
+
+#define AML_INT_NAMEPATH_OP         (u16) 0x002d
+#define AML_INT_NAMEDFIELD_OP       (u16) 0x0030
+#define AML_INT_RESERVEDFIELD_OP    (u16) 0x0031
+#define AML_INT_ACCESSFIELD_OP      (u16) 0x0032
+#define AML_INT_BYTELIST_OP         (u16) 0x0033
+#define AML_INT_STATICSTRING_OP     (u16) 0x0034
+#define AML_INT_METHODCALL_OP       (u16) 0x0035
+#define AML_INT_RETURN_VALUE_OP     (u16) 0x0036
+#define AML_INT_EVAL_SUBTREE_OP     (u16) 0x0037
+
+
+#define ARG_NONE                    0x0
+
+/*
+ * Argument types for the AML Parser
+ * Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments.
+ * There can be up to 31 unique argument types
+ * Zero is reserved as end-of-list indicator
+ */
+
+#define ARGP_BYTEDATA               0x01
+#define ARGP_BYTELIST               0x02
+#define ARGP_CHARLIST               0x03
+#define ARGP_DATAOBJ                0x04
+#define ARGP_DATAOBJLIST            0x05
+#define ARGP_DWORDDATA              0x06
+#define ARGP_FIELDLIST              0x07
+#define ARGP_NAME                   0x08
+#define ARGP_NAMESTRING             0x09
+#define ARGP_OBJLIST                0x0A
+#define ARGP_PKGLENGTH              0x0B
+#define ARGP_SUPERNAME              0x0C
+#define ARGP_TARGET                 0x0D
+#define ARGP_TERMARG                0x0E
+#define ARGP_TERMLIST               0x0F
+#define ARGP_WORDDATA               0x10
+#define ARGP_QWORDDATA              0x11
+#define ARGP_SIMPLENAME             0x12
+
+/*
+ * Resolved argument types for the AML Interpreter
+ * Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments.
+ * There can be up to 31 unique argument types (0 is end-of-arg-list indicator)
+ *
+ * Note1: These values are completely independent from the ACPI_TYPEs
+ *        i.e., ARGI_INTEGER != ACPI_TYPE_INTEGER
+ *
+ * Note2: If and when 5 bits becomes insufficient, it would probably be best
+ * to convert to a 6-byte array of argument types, allowing 8 bits per argument.
+ */
+
+/* Single, simple types */
+
+#define ARGI_ANYTYPE                0x01    /* Don't care */
+#define ARGI_PACKAGE                0x02
+#define ARGI_EVENT                  0x03
+#define ARGI_MUTEX                  0x04
+#define ARGI_DDBHANDLE              0x05
+
+/* Interchangeable types (via implicit conversion) */
+
+#define ARGI_INTEGER                0x06
+#define ARGI_STRING                 0x07
+#define ARGI_BUFFER                 0x08
+#define ARGI_BUFFER_OR_STRING       0x09    /* Used by MID op only */
+#define ARGI_COMPUTEDATA            0x0A    /* Buffer, String, or Integer */
+
+/* Reference objects */
+
+#define ARGI_INTEGER_REF            0x0B
+#define ARGI_OBJECT_REF             0x0C
+#define ARGI_DEVICE_REF             0x0D
+#define ARGI_REFERENCE              0x0E
+#define ARGI_TARGETREF              0x0F    /* Target, subject to implicit conversion */
+#define ARGI_FIXED_TARGET           0x10    /* Target, no implicit conversion */
+#define ARGI_SIMPLE_TARGET          0x11    /* Name, Local, Arg -- no implicit conversion */
+
+/* Multiple/complex types */
+
+#define ARGI_DATAOBJECT             0x12    /* Buffer, String, package or reference to a Node - Used only by size_of operator*/
+#define ARGI_COMPLEXOBJ             0x13    /* Buffer, String, or package (Used by INDEX op only) */
+#define ARGI_REF_OR_STRING          0x14    /* Reference or String (Used by DEREFOF op only) */
+#define ARGI_REGION_OR_FIELD        0x15    /* Used by LOAD op only */
+#define ARGI_DATAREFOBJ             0x16
+
+/* Note: types above can expand to 0x1F maximum */
+
+#define ARGI_INVALID_OPCODE         0xFFFFFFFF
+
+
+/*
+ * hash offsets
+ */
+#define AML_EXTOP_HASH_OFFSET       22
+#define AML_LNOT_HASH_OFFSET        19
+
+
+/*
+ * opcode groups and types
+ */
+
+#define OPGRP_NAMED                 0x01
+#define OPGRP_FIELD                 0x02
+#define OPGRP_BYTELIST              0x04
+
+
+/*
+ * Opcode information
+ */
+
+/* Opcode flags */
+
+#define AML_LOGICAL                 0x0001
+#define AML_LOGICAL_NUMERIC         0x0002
+#define AML_MATH                    0x0004
+#define AML_CREATE                  0x0008
+#define AML_FIELD                   0x0010
+#define AML_DEFER                   0x0020
+#define AML_NAMED                   0x0040
+#define AML_NSNODE                  0x0080
+#define AML_NSOPCODE                0x0100
+#define AML_NSOBJECT                0x0200
+#define AML_HAS_RETVAL              0x0400
+#define AML_HAS_TARGET              0x0800
+#define AML_HAS_ARGS                0x1000
+#define AML_CONSTANT                0x2000
+#define AML_NO_OPERAND_RESOLVE      0x4000
+
+/* Convenient flag groupings */
+
+#define AML_FLAGS_EXEC_0A_0T_1R                                     AML_HAS_RETVAL
+#define AML_FLAGS_EXEC_1A_0T_0R     AML_HAS_ARGS                                   /* Monadic1  */
+#define AML_FLAGS_EXEC_1A_0T_1R     AML_HAS_ARGS |                  AML_HAS_RETVAL /* Monadic2  */
+#define AML_FLAGS_EXEC_1A_1T_0R     AML_HAS_ARGS | AML_HAS_TARGET
+#define AML_FLAGS_EXEC_1A_1T_1R     AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* monadic2_r */
+#define AML_FLAGS_EXEC_2A_0T_0R     AML_HAS_ARGS                                   /* Dyadic1   */
+#define AML_FLAGS_EXEC_2A_0T_1R     AML_HAS_ARGS |                  AML_HAS_RETVAL /* Dyadic2   */
+#define AML_FLAGS_EXEC_2A_1T_1R     AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* dyadic2_r  */
+#define AML_FLAGS_EXEC_2A_2T_1R     AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL
+#define AML_FLAGS_EXEC_3A_0T_0R     AML_HAS_ARGS
+#define AML_FLAGS_EXEC_3A_1T_1R     AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL
+#define AML_FLAGS_EXEC_6A_0T_1R     AML_HAS_ARGS |                  AML_HAS_RETVAL
+
+
+/*
+ * The opcode Type is used in a dispatch table, do not change
+ * without updating the table.
+ */
+#define AML_TYPE_EXEC_0A_0T_1R      0x00
+#define AML_TYPE_EXEC_1A_0T_0R      0x01 /* Monadic1  */
+#define AML_TYPE_EXEC_1A_0T_1R      0x02 /* Monadic2  */
+#define AML_TYPE_EXEC_1A_1T_0R      0x03
+#define AML_TYPE_EXEC_1A_1T_1R      0x04 /* monadic2_r */
+#define AML_TYPE_EXEC_2A_0T_0R      0x05 /* Dyadic1   */
+#define AML_TYPE_EXEC_2A_0T_1R      0x06 /* Dyadic2   */
+#define AML_TYPE_EXEC_2A_1T_1R      0x07 /* dyadic2_r  */
+#define AML_TYPE_EXEC_2A_2T_1R      0x08
+#define AML_TYPE_EXEC_3A_0T_0R      0x09
+#define AML_TYPE_EXEC_3A_1T_1R      0x0A
+#define AML_TYPE_EXEC_6A_0T_1R      0x0B
+/* End of types used in dispatch table */
+
+#define AML_TYPE_LITERAL            0x0B
+#define AML_TYPE_CONSTANT           0x0C
+#define AML_TYPE_METHOD_ARGUMENT    0x0D
+#define AML_TYPE_LOCAL_VARIABLE     0x0E
+#define AML_TYPE_DATA_TERM          0x0F
+
+/* Generic for an op that returns a value */
+
+#define AML_TYPE_METHOD_CALL        0x10
+
+/* Misc */
+
+#define AML_TYPE_CREATE_FIELD       0x11
+#define AML_TYPE_CREATE_OBJECT      0x12
+#define AML_TYPE_CONTROL            0x13
+#define AML_TYPE_NAMED_NO_OBJ       0x14
+#define AML_TYPE_NAMED_FIELD        0x15
+#define AML_TYPE_NAMED_SIMPLE       0x16
+#define AML_TYPE_NAMED_COMPLEX      0x17
+#define AML_TYPE_RETURN             0x18
+
+#define AML_TYPE_UNDEFINED          0x19
+#define AML_TYPE_BOGUS              0x1A
+
+
+/*
+ * Opcode classes
+ */
+#define AML_CLASS_EXECUTE           0x00
+#define AML_CLASS_CREATE            0x01
+#define AML_CLASS_ARGUMENT          0x02
+#define AML_CLASS_NAMED_OBJECT      0x03
+#define AML_CLASS_CONTROL           0x04
+#define AML_CLASS_ASCII             0x05
+#define AML_CLASS_PREFIX            0x06
+#define AML_CLASS_INTERNAL          0x07
+#define AML_CLASS_RETURN_VALUE      0x08
+#define AML_CLASS_METHOD_CALL       0x09
+#define AML_CLASS_UNKNOWN           0x0A
+
+
+/* Predefined Operation Region space_iDs */
+
+typedef enum
+{
+	REGION_MEMORY                   = 0,
+	REGION_IO,
+	REGION_PCI_CONFIG,
+	REGION_EC,
+	REGION_SMBUS,
+	REGION_CMOS,
+	REGION_PCI_BAR,
+	REGION_DATA_TABLE,              /* Internal use only */
+	REGION_FIXED_HW                 = 0x7F
+
+} AML_REGION_TYPES;
+
+
+/* Comparison operation codes for match_op operator */
+
+typedef enum
+{
+	MATCH_MTR                       = 0,
+	MATCH_MEQ                       = 1,
+	MATCH_MLE                       = 2,
+	MATCH_MLT                       = 3,
+	MATCH_MGE                       = 4,
+	MATCH_MGT                       = 5
+
+} AML_MATCH_OPERATOR;
+
+#define MAX_MATCH_OPERATOR          5
+
+
+/*
+ * field_flags
+ *
+ * This byte is extracted from the AML and includes three separate
+ * pieces of information about the field:
+ * 1) The field access type
+ * 2) The field update rule
+ * 3) The lock rule for the field
+ *
+ * Bits 00 - 03 : access_type (any_acc, byte_acc, etc.)
+ *      04      : lock_rule (1 == Lock)
+ *      05 - 06 : update_rule
+ */
+#define AML_FIELD_ACCESS_TYPE_MASK  0x0F
+#define AML_FIELD_LOCK_RULE_MASK    0x10
+#define AML_FIELD_UPDATE_RULE_MASK  0x60
+
+
+/* 1) Field Access Types */
+
+typedef enum
+{
+	AML_FIELD_ACCESS_ANY            = 0x00,
+	AML_FIELD_ACCESS_BYTE           = 0x01,
+	AML_FIELD_ACCESS_WORD           = 0x02,
+	AML_FIELD_ACCESS_DWORD          = 0x03,
+	AML_FIELD_ACCESS_QWORD          = 0x04,    /* ACPI 2.0 */
+	AML_FIELD_ACCESS_BUFFER         = 0x05     /* ACPI 2.0 */
+
+} AML_ACCESS_TYPE;
+
+
+/* 2) Field Lock Rules */
+
+typedef enum
+{
+	AML_FIELD_LOCK_NEVER            = 0x00,
+	AML_FIELD_LOCK_ALWAYS           = 0x10
+
+} AML_LOCK_RULE;
+
+
+/* 3) Field Update Rules */
+
+typedef enum
+{
+	AML_FIELD_UPDATE_PRESERVE       = 0x00,
+	AML_FIELD_UPDATE_WRITE_AS_ONES  = 0x20,
+	AML_FIELD_UPDATE_WRITE_AS_ZEROS = 0x40
+
+} AML_UPDATE_RULE;
+
+
+/*
+ * Field Access Attributes.
+ * This byte is extracted from the AML via the
+ * access_as keyword
+ */
+typedef enum
+{
+	AML_FIELD_ATTRIB_SMB_QUICK      = 0x02,
+	AML_FIELD_ATTRIB_SMB_SEND_RCV   = 0x04,
+	AML_FIELD_ATTRIB_SMB_BYTE       = 0x06,
+	AML_FIELD_ATTRIB_SMB_WORD       = 0x08,
+	AML_FIELD_ATTRIB_SMB_BLOCK      = 0x0A,
+	AML_FIELD_ATTRIB_SMB_WORD_CALL  = 0x0C,
+	AML_FIELD_ATTRIB_SMB_BLOCK_CALL = 0x0D
+
+} AML_ACCESS_ATTRIBUTE;
+
+
+/* Bit fields in method_flags byte */
+
+#define AML_METHOD_ARG_COUNT        0x07
+#define AML_METHOD_SERIALIZED       0x08
+#define AML_METHOD_SYNCH_LEVEL      0xF0
+
+/* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */
+
+#define AML_METHOD_INTERNAL_ONLY    0x01
+#define AML_METHOD_RESERVED1        0x02
+#define AML_METHOD_RESERVED2        0x04
+
+
+#endif /* __AMLCODE_H__ */
diff --git a/include/acpi/amlresrc.h b/include/acpi/amlresrc.h
new file mode 100644
index 000000000000..b20ec303df07
--- /dev/null
+++ b/include/acpi/amlresrc.h
@@ -0,0 +1,353 @@
+
+/******************************************************************************
+ *
+ * Module Name: amlresrc.h - AML resource descriptors
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#ifndef __AMLRESRC_H
+#define __AMLRESRC_H
+
+
+#define ASL_RESNAME_ADDRESS                     "_ADR"
+#define ASL_RESNAME_ALIGNMENT                   "_ALN"
+#define ASL_RESNAME_ADDRESSSPACE                "_ASI"
+#define ASL_RESNAME_ACCESSSIZE                  "_ASZ"
+#define ASL_RESNAME_TYPESPECIFICATTRIBUTES      "_ATT"
+#define ASL_RESNAME_BASEADDRESS                 "_BAS"
+#define ASL_RESNAME_BUSMASTER                   "_BM_"  /* Master(1), Slave(0) */
+#define ASL_RESNAME_DECODE                      "_DEC"
+#define ASL_RESNAME_DMA                         "_DMA"
+#define ASL_RESNAME_DMATYPE                     "_TYP"  /* Compatible(0), A(1), B(2), F(3) */
+#define ASL_RESNAME_GRANULARITY                 "_GRA"
+#define ASL_RESNAME_INTERRUPT                   "_INT"
+#define ASL_RESNAME_INTERRUPTLEVEL              "_LL_"  /* active_lo(1), active_hi(0) */
+#define ASL_RESNAME_INTERRUPTSHARE              "_SHR"  /* Shareable(1), no_share(0) */
+#define ASL_RESNAME_INTERRUPTTYPE               "_HE_"  /* Edge(1), Level(0) */
+#define ASL_RESNAME_LENGTH                      "_LEN"
+#define ASL_RESNAME_MEMATTRIBUTES               "_MTP"  /* Memory(0), Reserved(1), ACPI(2), NVS(3) */
+#define ASL_RESNAME_MEMTYPE                     "_MEM"  /* non_cache(0), Cacheable(1) Cache+combine(2), Cache+prefetch(3) */
+#define ASL_RESNAME_MAXADDR                     "_MAX"
+#define ASL_RESNAME_MINADDR                     "_MIN"
+#define ASL_RESNAME_MAXTYPE                     "_MAF"
+#define ASL_RESNAME_MINTYPE                     "_MIF"
+#define ASL_RESNAME_REGISTERBITOFFSET           "_RBO"
+#define ASL_RESNAME_REGISTERBITWIDTH            "_RBW"
+#define ASL_RESNAME_RANGETYPE                   "_RNG"
+#define ASL_RESNAME_READWRITETYPE               "_RW_"  /* read_only(0), Writeable (1) */
+#define ASL_RESNAME_TRANSLATION                 "_TRA"
+#define ASL_RESNAME_TRANSTYPE                   "_TRS"  /* Sparse(1), Dense(0) */
+#define ASL_RESNAME_TYPE                        "_TTP"  /* Translation(1), Static (0) */
+#define ASL_RESNAME_XFERTYPE                    "_SIz"  /* 8(0), 8_and16(1), 16(2) */
+
+
+/* Default sizes for "small" resource descriptors */
+
+#define ASL_RDESC_IRQ_SIZE                      0x02
+#define ASL_RDESC_DMA_SIZE                      0x02
+#define ASL_RDESC_ST_DEPEND_SIZE                0x00
+#define ASL_RDESC_END_DEPEND_SIZE               0x00
+#define ASL_RDESC_IO_SIZE                       0x07
+#define ASL_RDESC_FIXED_IO_SIZE                 0x03
+#define ASL_RDESC_END_TAG_SIZE                  0x01
+
+
+struct asl_resource_node
+{
+	u32                                 buffer_length;
+	void                                *buffer;
+	struct asl_resource_node            *next;
+};
+
+
+/*
+ * Resource descriptors defined in the ACPI specification.
+ *
+ * Packing/alignment must be BYTE because these descriptors
+ * are used to overlay the AML byte stream.
+ */
+#pragma pack(1)
+
+struct asl_irq_format_desc
+{
+	u8                                  descriptor_type;
+	u16                                 irq_mask;
+	u8                                  flags;
+};
+
+
+struct asl_irq_noflags_desc
+{
+	u8                                  descriptor_type;
+	u16                                 irq_mask;
+};
+
+
+struct asl_dma_format_desc
+{
+	u8                                  descriptor_type;
+	u8                                  dma_channel_mask;
+	u8                                  flags;
+};
+
+
+struct asl_start_dependent_desc
+{
+	u8                                  descriptor_type;
+	u8                                  flags;
+};
+
+
+struct asl_start_dependent_noprio_desc
+{
+	u8                                  descriptor_type;
+};
+
+
+struct asl_end_dependent_desc
+{
+	u8                                  descriptor_type;
+};
+
+
+struct asl_io_port_desc
+{
+	u8                                  descriptor_type;
+	u8                                  information;
+	u16                                 address_min;
+	u16                                 address_max;
+	u8                                  alignment;
+	u8                                  length;
+};
+
+
+struct asl_fixed_io_port_desc
+{
+	u8                                  descriptor_type;
+	u16                                 base_address;
+	u8                                  length;
+};
+
+
+struct asl_small_vendor_desc
+{
+	u8                                  descriptor_type;
+	u8                                  vendor_defined[7];
+};
+
+
+struct asl_end_tag_desc
+{
+	u8                                  descriptor_type;
+	u8                                  checksum;
+};
+
+
+/* LARGE descriptors */
+
+struct asl_memory_24_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  information;
+	u16                                 address_min;
+	u16                                 address_max;
+	u16                                 alignment;
+	u16                                 range_length;
+};
+
+
+struct asl_large_vendor_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  vendor_defined[1];
+};
+
+
+struct asl_memory_32_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  information;
+	u32                                 address_min;
+	u32                                 address_max;
+	u32                                 alignment;
+	u32                                 range_length;
+};
+
+
+struct asl_fixed_memory_32_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  information;
+	u32                                 base_address;
+	u32                                 range_length;
+};
+
+
+struct asl_extended_address_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  resource_type;
+	u8                                  flags;
+	u8                                  specific_flags;
+	u8                                  revision_iD;
+	u8                                  reserved;
+	u64                                 granularity;
+	u64                                 address_min;
+	u64                                 address_max;
+	u64                                 translation_offset;
+	u64                                 address_length;
+	u64                                 type_specific_attributes;
+	u8                                  optional_fields[2]; /* Used for length calculation only */
+};
+
+#define ASL_EXTENDED_ADDRESS_DESC_REVISION          1       /* ACPI 3.0 */
+
+
+struct asl_qword_address_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  resource_type;
+	u8                                  flags;
+	u8                                  specific_flags;
+	u64                                 granularity;
+	u64                                 address_min;
+	u64                                 address_max;
+	u64                                 translation_offset;
+	u64                                 address_length;
+	u8                                  optional_fields[2];
+};
+
+
+struct asl_dword_address_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  resource_type;
+	u8                                  flags;
+	u8                                  specific_flags;
+	u32                                 granularity;
+	u32                                 address_min;
+	u32                                 address_max;
+	u32                                 translation_offset;
+	u32                                 address_length;
+	u8                                  optional_fields[2];
+};
+
+
+struct asl_word_address_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  resource_type;
+	u8                                  flags;
+	u8                                  specific_flags;
+	u16                                 granularity;
+	u16                                 address_min;
+	u16                                 address_max;
+	u16                                 translation_offset;
+	u16                                 address_length;
+	u8                                  optional_fields[2];
+};
+
+
+struct asl_extended_xrupt_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  flags;
+	u8                                  table_length;
+	u32                                 interrupt_number[1];
+	/* res_source_index, res_source optional fields follow */
+};
+
+
+struct asl_general_register_desc
+{
+	u8                                  descriptor_type;
+	u16                                 length;
+	u8                                  address_space_id;
+	u8                                  bit_width;
+	u8                                  bit_offset;
+	u8                                  access_size; /* ACPI 3.0, was Reserved */
+	u64                                 address;
+};
+
+/* restore default alignment */
+
+#pragma pack()
+
+/* Union of all resource descriptors, so we can allocate the worst case */
+
+union asl_resource_desc
+{
+	struct asl_irq_format_desc          irq;
+	struct asl_dma_format_desc          dma;
+	struct asl_start_dependent_desc     std;
+	struct asl_end_dependent_desc       end;
+	struct asl_io_port_desc             iop;
+	struct asl_fixed_io_port_desc       fio;
+	struct asl_small_vendor_desc        smv;
+	struct asl_end_tag_desc             et;
+
+	struct asl_memory_24_desc           M24;
+	struct asl_large_vendor_desc        lgv;
+	struct asl_memory_32_desc           M32;
+	struct asl_fixed_memory_32_desc     F32;
+	struct asl_qword_address_desc       qas;
+	struct asl_dword_address_desc       das;
+	struct asl_word_address_desc        was;
+	struct asl_extended_address_desc    eas;
+	struct asl_extended_xrupt_desc      exx;
+	struct asl_general_register_desc    grg;
+	u32                                 u32_item;
+	u16                                 u16_item;
+	u8                                  U8item;
+};
+
+
+#endif
+
diff --git a/include/acpi/container.h b/include/acpi/container.h
new file mode 100644
index 000000000000..d716df04d9dc
--- /dev/null
+++ b/include/acpi/container.h
@@ -0,0 +1,13 @@
+#ifndef __ACPI_CONTAINER_H
+#define __ACPI_CONTAINER_H
+
+#include <linux/kernel.h>
+
+struct acpi_container {
+	acpi_handle handle;
+	unsigned long sun;
+	int state;
+};
+
+#endif /* __ACPI_CONTAINER_H */
+
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
new file mode 100644
index 000000000000..57bf9362335d
--- /dev/null
+++ b/include/acpi/platform/acenv.h
@@ -0,0 +1,378 @@
+/******************************************************************************
+ *
+ * Name: acenv.h - Generation environment specific items
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACENV_H__
+#define __ACENV_H__
+
+
+/*
+ * Configuration for ACPI tools and utilities
+ */
+
+#ifdef _ACPI_DUMP_APP
+#ifndef MSDOS
+#define ACPI_DEBUG_OUTPUT
+#endif
+#define ACPI_APPLICATION
+#define ACPI_DISASSEMBLER
+#define ACPI_NO_METHOD_EXECUTION
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_ENABLE_OBJECT_CACHE
+#endif
+
+#ifdef _ACPI_EXEC_APP
+#undef DEBUGGER_THREADING
+#define DEBUGGER_THREADING      DEBUGGER_SINGLE_THREADED
+#define ACPI_DEBUG_OUTPUT
+#define ACPI_APPLICATION
+#define ACPI_DEBUGGER
+#define ACPI_DISASSEMBLER
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_ENABLE_OBJECT_CACHE
+#endif
+
+#ifdef _ACPI_ASL_COMPILER
+#define ACPI_DEBUG_OUTPUT
+#define ACPI_APPLICATION
+#define ACPI_DISASSEMBLER
+#define ACPI_CONSTANT_EVAL_ONLY
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_ENABLE_OBJECT_CACHE
+#endif
+
+/*
+ * Environment configuration.  The purpose of this file is to interface to the
+ * local generation environment.
+ *
+ * 1) ACPI_USE_SYSTEM_CLIBRARY - Define this if linking to an actual C library.
+ *      Otherwise, local versions of string/memory functions will be used.
+ * 2) ACPI_USE_STANDARD_HEADERS - Define this if linking to a C library and
+ *      the standard header files may be used.
+ *
+ * The ACPI subsystem only uses low level C library functions that do not call
+ * operating system services and may therefore be inlined in the code.
+ *
+ * It may be necessary to tailor these include files to the target
+ * generation environment.
+ *
+ *
+ * Functions and constants used from each header:
+ *
+ * string.h:    memcpy
+ *              memset
+ *              strcat
+ *              strcmp
+ *              strcpy
+ *              strlen
+ *              strncmp
+ *              strncat
+ *              strncpy
+ *
+ * stdlib.h:    strtoul
+ *
+ * stdarg.h:    va_list
+ *              va_arg
+ *              va_start
+ *              va_end
+ *
+ */
+
+/*! [Begin] no source code translation */
+
+#if defined(__linux__)
+#include "aclinux.h"
+
+#elif defined(_AED_EFI)
+#include "acefi.h"
+
+#elif defined(WIN32)
+#include "acwin.h"
+
+#elif defined(WIN64)
+#include "acwin64.h"
+
+#elif defined(MSDOS)        /* Must appear after WIN32 and WIN64 check */
+#include "acdos16.h"
+
+#elif defined(__FreeBSD__)
+#include "acfreebsd.h"
+
+#elif defined(__NetBSD__)
+#include "acnetbsd.h"
+
+#elif defined(MODESTO)
+#include "acmodesto.h"
+
+#elif defined(NETWARE)
+#include "acnetware.h"
+
+#else
+
+/* All other environments */
+
+#define ACPI_USE_STANDARD_HEADERS
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+/*
+ * This macro is used to tag functions as "printf-like" because
+ * some compilers can catch printf format string problems. MSVC
+ * doesn't, so this is proprocessed away.
+ */
+#define ACPI_PRINTF_LIKE_FUNC
+
+#endif
+
+/*
+ * Memory allocation tracking.  Used only if
+ * 1) This is the debug version
+ * 2) This is NOT a 16-bit version of the code (not enough real-mode memory)
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+#if ACPI_MACHINE_WIDTH != 16
+#define ACPI_DBG_TRACK_ALLOCATIONS
+#endif
+#endif
+
+/*! [End] no source code translation !*/
+
+
+/*
+ * Debugger threading model
+ * Use single threaded if the entire subsystem is contained in an application
+ * Use multiple threaded when the subsystem is running in the kernel.
+ *
+ * By default the model is single threaded if ACPI_APPLICATION is set,
+ * multi-threaded if ACPI_APPLICATION is not set.
+ */
+#define DEBUGGER_SINGLE_THREADED    0
+#define DEBUGGER_MULTI_THREADED     1
+
+#ifndef DEBUGGER_THREADING
+#ifdef ACPI_APPLICATION
+#define DEBUGGER_THREADING          DEBUGGER_SINGLE_THREADED
+
+#else
+#define DEBUGGER_THREADING          DEBUGGER_MULTI_THREADED
+#endif
+#endif /* !DEBUGGER_THREADING */
+
+/******************************************************************************
+ *
+ * C library configuration
+ *
+ *****************************************************************************/
+
+#ifdef ACPI_USE_SYSTEM_CLIBRARY
+/*
+ * Use the standard C library headers.
+ * We want to keep these to a minimum.
+ */
+
+#ifdef ACPI_USE_STANDARD_HEADERS
+/*
+ * Use the standard headers from the standard locations
+ */
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+#endif /* ACPI_USE_STANDARD_HEADERS */
+
+/*
+ * We will be linking to the standard Clib functions
+ */
+
+#define ACPI_STRSTR(s1,s2)      strstr((s1), (s2))
+#define ACPI_STRCHR(s1,c)       strchr((s1), (c))
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_STRUPR(s)          (void) acpi_ut_strupr ((s))
+#endif
+
+#define ACPI_STRLEN(s)          (acpi_size) strlen((s))
+#define ACPI_STRCPY(d,s)        (void) strcpy((d), (s))
+#define ACPI_STRNCPY(d,s,n)     (void) strncpy((d), (s), (acpi_size)(n))
+#define ACPI_STRNCMP(d,s,n)     strncmp((d), (s), (acpi_size)(n))
+#define ACPI_STRCMP(d,s)        strcmp((d), (s))
+#define ACPI_STRCAT(d,s)        (void) strcat((d), (s))
+#define ACPI_STRNCAT(d,s,n)     strncat((d), (s), (acpi_size)(n))
+#define ACPI_STRTOUL(d,s,n)     strtoul((d), (s), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n)    memcmp((s1), (s2), (acpi_size)(n))
+#define ACPI_MEMCPY(d,s,n)      (void) memcpy((d), (s), (acpi_size)(n))
+#define ACPI_MEMSET(d,s,n)      (void) memset((d), (s), (acpi_size)(n))
+
+#define ACPI_TOUPPER            toupper
+#define ACPI_TOLOWER            tolower
+#define ACPI_IS_XDIGIT          isxdigit
+#define ACPI_IS_DIGIT           isdigit
+#define ACPI_IS_SPACE           isspace
+#define ACPI_IS_UPPER           isupper
+#define ACPI_IS_PRINT           isprint
+#define ACPI_IS_ALPHA           isalpha
+#define ACPI_IS_ASCII           isascii
+
+/******************************************************************************
+ *
+ * Not using native C library, use local implementations
+ *
+ *****************************************************************************/
+#else
+
+/*
+ * Use local definitions of C library macros and functions
+ * NOTE: The function implementations may not be as efficient
+ * as an inline or assembly code implementation provided by a
+ * native C library.
+ */
+
+#ifndef va_arg
+
+#ifndef _VALIST
+#define _VALIST
+typedef char *va_list;
+#endif /* _VALIST */
+
+/*
+ * Storage alignment properties
+ */
+
+#define  _AUPBND                (sizeof (acpi_native_int) - 1)
+#define  _ADNBND                (sizeof (acpi_native_int) - 1)
+
+/*
+ * Variable argument list macro definitions
+ */
+
+#define _bnd(X, bnd)            (((sizeof (X)) + (bnd)) & (~(bnd)))
+#define va_arg(ap, T)           (*(T *)(((ap) += (_bnd (T, _AUPBND))) - (_bnd (T,_ADNBND))))
+#define va_end(ap)              (void) 0
+#define va_start(ap, A)         (void) ((ap) = (((char *) &(A)) + (_bnd (A,_AUPBND))))
+
+#endif /* va_arg */
+
+
+#define ACPI_STRSTR(s1,s2)      acpi_ut_strstr ((s1), (s2))
+#define ACPI_STRCHR(s1,c)       acpi_ut_strchr ((s1), (c))
+
+#ifdef ACPI_FUTURE_USAGE
+#define ACPI_STRUPR(s)          (void) acpi_ut_strupr ((s))
+#endif
+
+#define ACPI_STRLEN(s)          (acpi_size) acpi_ut_strlen ((s))
+#define ACPI_STRCPY(d,s)        (void) acpi_ut_strcpy ((d), (s))
+#define ACPI_STRNCPY(d,s,n)     (void) acpi_ut_strncpy ((d), (s), (acpi_size)(n))
+#define ACPI_STRNCMP(d,s,n)     acpi_ut_strncmp ((d), (s), (acpi_size)(n))
+#define ACPI_STRCMP(d,s)        acpi_ut_strcmp ((d), (s))
+#define ACPI_STRCAT(d,s)        (void) acpi_ut_strcat ((d), (s))
+#define ACPI_STRNCAT(d,s,n)     acpi_ut_strncat ((d), (s), (acpi_size)(n))
+#define ACPI_STRTOUL(d,s,n)     acpi_ut_strtoul ((d), (s), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n)    acpi_ut_memcmp((s1), (s2), (acpi_size)(n))
+#define ACPI_MEMCPY(d,s,n)      (void) acpi_ut_memcpy ((d), (s), (acpi_size)(n))
+#define ACPI_MEMSET(d,v,n)      (void) acpi_ut_memset ((d), (v), (acpi_size)(n))
+#define ACPI_TOUPPER            acpi_ut_to_upper
+#define ACPI_TOLOWER            acpi_ut_to_lower
+
+#endif /* ACPI_USE_SYSTEM_CLIBRARY */
+
+
+/******************************************************************************
+ *
+ * Assembly code macros
+ *
+ *****************************************************************************/
+
+/*
+ * Handle platform- and compiler-specific assembly language differences.
+ * These should already have been defined by the platform includes above.
+ *
+ * Notes:
+ * 1) Interrupt 3 is used to break into a debugger
+ * 2) Interrupts are turned off during ACPI register setup
+ */
+
+/* Unrecognized compiler, use defaults */
+
+#ifndef ACPI_ASM_MACROS
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS()
+#define ACPI_ENABLE_IRQS()
+#define ACPI_ACQUIRE_GLOBAL_LOCK(Glptr, acq)
+#define ACPI_RELEASE_GLOBAL_LOCK(Glptr, acq)
+
+#endif /* ACPI_ASM_MACROS */
+
+
+#ifdef ACPI_APPLICATION
+
+/* Don't want software interrupts within a ring3 application */
+
+#undef BREAKPOINT3
+#define BREAKPOINT3
+#endif
+
+
+/******************************************************************************
+ *
+ * Compiler-specific information is contained in the compiler-specific
+ * headers.
+ *
+ *****************************************************************************/
+#endif /* __ACENV_H__ */
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
new file mode 100644
index 000000000000..91fda36b042b
--- /dev/null
+++ b/include/acpi/platform/acgcc.h
@@ -0,0 +1,59 @@
+/******************************************************************************
+ *
+ * Name: acgcc.h - GCC specific defines, etc.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACGCC_H__
+#define __ACGCC_H__
+
+/* This macro is used to tag functions as "printf-like" because
+ * some compilers (like GCC) can catch printf format string problems.
+ */
+#define ACPI_PRINTF_LIKE_FUNC __attribute__ ((__format__ (__printf__, 4, 5)))
+
+/* Some compilers complain about unused variables. Sometimes we don't want to
+ * use all the variables (most specifically for _THIS_MODULE). This allow us
+ * to to tell the compiler warning in a per-variable manner that a variable
+ * is unused.
+ */
+#define ACPI_UNUSED_VAR __attribute__ ((unused))
+
+#endif /* __ACGCC_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
new file mode 100644
index 000000000000..a3de0db85694
--- /dev/null
+++ b/include/acpi/platform/aclinux.h
@@ -0,0 +1,92 @@
+/******************************************************************************
+ *
+ * Name: aclinux.h - OS specific defines, etc.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACLINUX_H__
+#define __ACLINUX_H__
+
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_USE_DO_WHILE_0
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/div64.h>
+#include <asm/acpi.h>
+
+#define strtoul simple_strtoul
+
+#define ACPI_MACHINE_WIDTH  BITS_PER_LONG
+
+#else /* !__KERNEL__ */
+
+#include <stdarg.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <unistd.h>
+
+#if defined(__ia64__) || defined(__x86_64__)
+#define ACPI_MACHINE_WIDTH          64
+#define COMPILER_DEPENDENT_INT64    long
+#define COMPILER_DEPENDENT_UINT64   unsigned long
+#else
+#define ACPI_MACHINE_WIDTH          32
+#define COMPILER_DEPENDENT_INT64    long long
+#define COMPILER_DEPENDENT_UINT64   unsigned long long
+#define ACPI_USE_NATIVE_DIVIDE
+#endif
+
+#define __cdecl
+#define ACPI_FLUSH_CPU_CACHE()
+#endif /* __KERNEL__ */
+
+/* Linux uses GCC */
+
+#include "acgcc.h"
+
+#endif /* __ACLINUX_H__ */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
new file mode 100644
index 000000000000..2f50a5bb0c78
--- /dev/null
+++ b/include/acpi/processor.h
@@ -0,0 +1,235 @@
+#ifndef __ACPI_PROCESSOR_H
+#define __ACPI_PROCESSOR_H
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+
+#define ACPI_PROCESSOR_BUSY_METRIC	10
+
+#define ACPI_PROCESSOR_MAX_POWER	8
+#define ACPI_PROCESSOR_MAX_C2_LATENCY	100
+#define ACPI_PROCESSOR_MAX_C3_LATENCY	1000
+
+#define ACPI_PROCESSOR_MAX_THROTTLING	16
+#define ACPI_PROCESSOR_MAX_THROTTLE	250	/* 25% */
+#define ACPI_PROCESSOR_MAX_DUTY_WIDTH	4
+
+/* Power Management */
+
+struct acpi_processor_cx;
+
+struct acpi_power_register {
+	u8			descriptor;
+	u16			length;
+	u8			space_id;
+	u8			bit_width;
+	u8			bit_offset;
+	u8			reserved;
+	u64			address;
+} __attribute__ ((packed));
+
+
+struct acpi_processor_cx_policy {
+	u32			count;
+	struct acpi_processor_cx *state;
+	struct {
+		u32			time;
+		u32			ticks;
+		u32			count;
+		u32			bm;
+	}			threshold;
+};
+
+struct acpi_processor_cx {
+	u8			valid;
+	u8			type;
+	u32			address;
+	u32			latency;
+	u32			latency_ticks;
+	u32			power;
+	u32			usage;
+	struct acpi_processor_cx_policy promotion;
+	struct acpi_processor_cx_policy demotion;
+};
+
+struct acpi_processor_power {
+	struct acpi_processor_cx *state;
+	unsigned long		bm_check_timestamp;
+	u32			default_state;
+	u32			bm_activity;
+	int			count;
+	struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
+};
+
+/* Performance Management */
+
+struct acpi_pct_register {
+	u8			descriptor;
+	u16			length;
+	u8			space_id;
+	u8			bit_width;
+	u8			bit_offset;
+	u8			reserved;
+	u64			address;
+} __attribute__ ((packed));
+
+struct acpi_processor_px {
+	acpi_integer		core_frequency;		/* megahertz */
+	acpi_integer		power;			/* milliWatts */
+	acpi_integer		transition_latency;	/* microseconds */
+	acpi_integer		bus_master_latency;	/* microseconds */
+	acpi_integer		control;		/* control value */
+	acpi_integer		status;			/* success indicator */
+};
+
+#define ACPI_PDC_REVISION_ID                   0x1
+
+struct acpi_processor_performance {
+	unsigned int		 state;
+	unsigned int		 platform_limit;
+	struct acpi_pct_register control_register;
+	struct acpi_pct_register status_register;
+	unsigned int		 state_count;
+	struct acpi_processor_px *states;
+
+	/* the _PDC objects passed by the driver, if any */
+	struct acpi_object_list *pdc;
+};
+
+
+
+/* Throttling Control */
+
+struct acpi_processor_tx {
+	u16			power;
+	u16			performance;
+};
+
+struct acpi_processor_throttling {
+	int			state;
+	u32			address;
+	u8			duty_offset;
+	u8			duty_width;
+	int			state_count;
+	struct acpi_processor_tx states[ACPI_PROCESSOR_MAX_THROTTLING];
+};
+
+/* Limit Interface */
+
+struct acpi_processor_lx {
+	int			px;		/* performace state */	
+	int			tx;		/* throttle level */
+};
+
+struct acpi_processor_limit {
+	struct acpi_processor_lx state;		/* current limit */
+	struct acpi_processor_lx thermal;	/* thermal limit */
+	struct acpi_processor_lx user;		/* user limit */
+};
+
+
+struct acpi_processor_flags {
+	u8			power:1;
+	u8			performance:1;
+	u8			throttling:1;
+	u8			limit:1;
+	u8			bm_control:1;
+	u8			bm_check:1;
+	u8			has_cst:1;
+	u8			power_setup_done:1;
+};
+
+struct acpi_processor {
+	acpi_handle		handle;
+	u32			acpi_id;
+	u32			id;
+	u32			pblk;
+	int			performance_platform_limit;
+	struct acpi_processor_flags flags;
+	struct acpi_processor_power power;
+	struct acpi_processor_performance *performance;
+	struct acpi_processor_throttling throttling;
+	struct acpi_processor_limit limit;
+};
+
+struct acpi_processor_errata {
+	u8			smp;
+	struct {
+		u8			throttle:1;
+		u8			fdma:1;
+		u8			reserved:6;
+		u32			bmisx;
+	}			piix4;
+};
+
+extern int acpi_processor_register_performance (
+	struct acpi_processor_performance * performance,
+	unsigned int cpu);
+extern void acpi_processor_unregister_performance (
+	struct acpi_processor_performance * performance,
+	unsigned int cpu);
+
+/* note: this locks both the calling module and the processor module
+         if a _PPC object exists, rmmod is disallowed then */
+int acpi_processor_notify_smm(struct module *calling_module);
+
+
+
+/* for communication between multiple parts of the processor kernel module */
+extern struct acpi_processor	*processors[NR_CPUS];
+extern struct acpi_processor_errata errata;
+
+/* in processor_perflib.c */
+#ifdef CONFIG_CPU_FREQ
+void acpi_processor_ppc_init(void);
+void acpi_processor_ppc_exit(void);
+int acpi_processor_ppc_has_changed(struct acpi_processor *pr);
+#else
+static inline void acpi_processor_ppc_init(void) { return; }
+static inline void acpi_processor_ppc_exit(void) { return; }
+static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr) {
+	static unsigned int printout = 1;
+	if (printout) {
+		printk(KERN_WARNING "Warning: Processor Platform Limit event detected, but not handled.\n");
+		printk(KERN_WARNING "Consider compiling CPUfreq support into your kernel.\n");
+		printout = 0;
+	}
+	return 0;
+}
+#endif /* CONFIG_CPU_FREQ */
+
+/* in processor_throttling.c */
+int acpi_processor_get_throttling_info (struct acpi_processor *pr);
+int acpi_processor_set_throttling (struct acpi_processor *pr, int state);
+ssize_t acpi_processor_write_throttling (
+        struct file		*file,
+        const char		__user *buffer,
+        size_t			count,
+        loff_t			*data);
+extern struct file_operations acpi_processor_throttling_fops;
+
+/* in processor_idle.c */
+int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device);
+int acpi_processor_cst_has_changed (struct acpi_processor *pr);
+int acpi_processor_power_exit(struct acpi_processor *pr, struct acpi_device *device);
+
+
+/* in processor_thermal.c */
+int acpi_processor_get_limit_info (struct acpi_processor *pr);
+ssize_t acpi_processor_write_limit (
+	struct file		*file,
+	const char		__user *buffer,
+	size_t			count,
+	loff_t			*data);
+extern struct file_operations acpi_processor_limit_fops;
+
+#ifdef CONFIG_CPU_FREQ
+void acpi_thermal_cpufreq_init(void);
+void acpi_thermal_cpufreq_exit(void);
+#else
+static inline void acpi_thermal_cpufreq_init(void) { return; }
+static inline void acpi_thermal_cpufreq_exit(void) { return; }
+#endif
+
+
+#endif
diff --git a/include/asm-alpha/8253pit.h b/include/asm-alpha/8253pit.h
new file mode 100644
index 000000000000..fef5c1450e47
--- /dev/null
+++ b/include/asm-alpha/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193180UL
+
+#endif
diff --git a/include/asm-alpha/a.out.h b/include/asm-alpha/a.out.h
new file mode 100644
index 000000000000..d97daf42753d
--- /dev/null
+++ b/include/asm-alpha/a.out.h
@@ -0,0 +1,106 @@
+#ifndef __ALPHA_A_OUT_H__
+#define __ALPHA_A_OUT_H__
+
+#include <linux/types.h>
+
+/*
+ * OSF/1 ECOFF header structs.  ECOFF files consist of:
+ * 	- a file header (struct filehdr),
+ *	- an a.out header (struct aouthdr),
+ *	- one or more section headers (struct scnhdr). 
+ *	  The filhdr's "f_nscns" field contains the
+ *	  number of section headers.
+ */
+
+struct filehdr
+{
+	/* OSF/1 "file" header */
+	__u16 f_magic, f_nscns;
+	__u32 f_timdat;
+	__u64 f_symptr;
+	__u32 f_nsyms;
+	__u16 f_opthdr, f_flags;
+};
+
+struct aouthdr
+{
+	__u64 info;		/* after that it looks quite normal.. */
+	__u64 tsize;
+	__u64 dsize;
+	__u64 bsize;
+	__u64 entry;
+	__u64 text_start;	/* with a few additions that actually make sense */
+	__u64 data_start;
+	__u64 bss_start;
+	__u32 gprmask, fprmask;	/* bitmask of general & floating point regs used in binary */
+	__u64 gpvalue;
+};
+
+struct scnhdr
+{
+	char	s_name[8];
+	__u64	s_paddr;
+	__u64	s_vaddr;
+	__u64	s_size;
+	__u64	s_scnptr;
+	__u64	s_relptr;
+	__u64	s_lnnoptr;
+	__u16	s_nreloc;
+	__u16	s_nlnno;
+	__u32	s_flags;
+};
+
+struct exec
+{
+	/* OSF/1 "file" header */
+	struct filehdr		fh;
+	struct aouthdr		ah;
+};
+
+/*
+ * Define's so that the kernel exec code can access the a.out header
+ * fields...
+ */
+#define	a_info		ah.info
+#define	a_text		ah.tsize
+#define a_data		ah.dsize
+#define a_bss		ah.bsize
+#define a_entry		ah.entry
+#define a_textstart	ah.text_start
+#define	a_datastart	ah.data_start
+#define	a_bssstart	ah.bss_start
+#define	a_gprmask	ah.gprmask
+#define a_fprmask	ah.fprmask
+#define a_gpvalue	ah.gpvalue
+
+#define N_TXTADDR(x) ((x).a_textstart)
+#define N_DATADDR(x) ((x).a_datastart)
+#define N_BSSADDR(x) ((x).a_bssstart)
+#define N_DRSIZE(x) 0
+#define N_TRSIZE(x) 0
+#define N_SYMSIZE(x) 0
+
+#define AOUTHSZ		sizeof(struct aouthdr)
+#define SCNHSZ		sizeof(struct scnhdr)
+#define SCNROUND	16
+
+#define N_TXTOFF(x) \
+  ((long) N_MAGIC(x) == ZMAGIC ? 0 : \
+   (sizeof(struct exec) + (x).fh.f_nscns*SCNHSZ + SCNROUND - 1) & ~(SCNROUND - 1))
+
+#ifdef __KERNEL__
+
+/* Assume that start addresses below 4G belong to a TASO application.
+   Unfortunately, there is no proper bit in the exec header to check.
+   Worse, we have to notice the start address before swapping to use
+   /sbin/loader, which of course is _not_ a TASO application.  */
+#define SET_AOUT_PERSONALITY(BFPM, EX) \
+	set_personality (((BFPM->sh_bang || EX.ah.entry < 0x100000000L \
+			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
+
+#define STACK_TOP \
+  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-alpha/agp.h b/include/asm-alpha/agp.h
new file mode 100644
index 000000000000..c99dbbb5bcb5
--- /dev/null
+++ b/include/asm-alpha/agp.h
@@ -0,0 +1,13 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/io.h>
+
+/* dummy for now */
+
+#define map_page_into_agp(page) 
+#define unmap_page_from_agp(page) 
+#define flush_agp_mappings() 
+#define flush_agp_cache() mb()
+
+#endif
diff --git a/include/asm-alpha/agp_backend.h b/include/asm-alpha/agp_backend.h
new file mode 100644
index 000000000000..55dd44a2cea7
--- /dev/null
+++ b/include/asm-alpha/agp_backend.h
@@ -0,0 +1,42 @@
+#ifndef _ALPHA_AGP_BACKEND_H
+#define _ALPHA_AGP_BACKEND_H 1
+
+typedef	union _alpha_agp_mode {
+	struct {
+		u32 rate : 3;
+		u32 reserved0 : 1;
+		u32 fw : 1;
+		u32 fourgb : 1;
+		u32 reserved1 : 2;
+		u32 enable : 1;
+		u32 sba : 1;
+		u32 reserved2 : 14;
+		u32 rq : 8;
+	} bits;
+	u32 lw;
+} alpha_agp_mode;
+
+typedef struct _alpha_agp_info {
+	struct pci_controller *hose;
+	struct {
+		dma_addr_t bus_base;
+		unsigned long size;
+		void *sysdata;
+	} aperture;
+	alpha_agp_mode capability;
+	alpha_agp_mode mode;
+	void *private;
+	struct alpha_agp_ops *ops;
+} alpha_agp_info;
+
+struct alpha_agp_ops {
+	int (*setup)(alpha_agp_info *);
+	void (*cleanup)(alpha_agp_info *);
+	int (*configure)(alpha_agp_info *);
+	int (*bind)(alpha_agp_info *, off_t, struct agp_memory *);
+	int (*unbind)(alpha_agp_info *, off_t, struct agp_memory *);
+	unsigned long (*translate)(alpha_agp_info *, dma_addr_t);
+};
+
+
+#endif /* _ALPHA_AGP_BACKEND_H */
diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h
new file mode 100644
index 000000000000..1b383e3cb68c
--- /dev/null
+++ b/include/asm-alpha/atomic.h
@@ -0,0 +1,198 @@
+#ifndef _ALPHA_ATOMIC_H
+#define _ALPHA_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc...
+ *
+ * But use these as seldom as possible since they are much slower
+ * than regular operations.
+ */
+
+
+/*
+ * Counter is volatile to make sure gcc doesn't try to be clever
+ * and move things around on us. We need to use _exactly_ the address
+ * the user gave us, not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
+#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter + 0)
+#define atomic64_read(v)	((v)->counter + 0)
+
+#define atomic_set(v,i)		((v)->counter = (i))
+#define atomic64_set(v,i)	((v)->counter = (i))
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	addl %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	addq %0,%2,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	subl %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	subq %0,%2,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long atomic_add_return(int i, atomic_t * v)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	addl %0,%3,%2\n"
+	"	addl %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	return result;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	addq %0,%3,%2\n"
+	"	addq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	return result;
+}
+
+static __inline__ long atomic_sub_return(int i, atomic_t * v)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	subl %0,%3,%2\n"
+	"	subl %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	subq %0,%3,%2\n"
+	"	subq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	return result;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
+
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+#define atomic64_inc_return(v) atomic64_add_return(1,(v))
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic64_inc(v) atomic64_add(1,(v))
+
+#define atomic_dec(v) atomic_sub(1,(v))
+#define atomic64_dec(v) atomic64_sub(1,(v))
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#endif /* _ALPHA_ATOMIC_H */
diff --git a/include/asm-alpha/bitops.h b/include/asm-alpha/bitops.h
new file mode 100644
index 000000000000..578ed3f1a607
--- /dev/null
+++ b/include/asm-alpha/bitops.h
@@ -0,0 +1,507 @@
+#ifndef _ALPHA_BITOPS_H
+#define _ALPHA_BITOPS_H
+
+#include <linux/config.h>
+#include <asm/compiler.h>
+
+/*
+ * Copyright 1994, Linus Torvalds.
+ */
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ *
+ * bit 0 is the LSB of addr; bit 64 is the LSB of (addr+1).
+ */
+
+static inline void
+set_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	bis %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline void
+__set_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m |= 1 << (nr & 31);
+}
+
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+static inline void
+clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	bic %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ void
+__clear_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m &= ~(1 << (nr & 31));
+}
+
+static inline void
+change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	xor %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ void
+__change_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m ^= 1 << (nr & 31);
+}
+
+static inline int
+test_and_set_bit(unsigned long nr, volatile void *addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	bne %2,2f\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+	"2:\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline int
+__test_and_set_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old | mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_and_clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	beq %2,2f\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+	"2:\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline int
+__test_and_clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_and_change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ int
+__test_and_change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old ^ mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_bit(int nr, const volatile void * addr)
+{
+	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ *
+ * Do a binary search on the bits.  Due to the nature of large
+ * constants on the alpha, it is worthwhile to split the search.
+ */
+static inline unsigned long ffz_b(unsigned long x)
+{
+	unsigned long sum, x1, x2, x4;
+
+	x = ~x & -~x;		/* set first 0 bit, clear others */
+	x1 = x & 0xAA;
+	x2 = x & 0xCC;
+	x4 = x & 0xF0;
+	sum = x2 ? 2 : 0;
+	sum += (x4 != 0) * 4;
+	sum += (x1 != 0);
+
+	return sum;
+}
+
+static inline unsigned long ffz(unsigned long word)
+{
+#if defined(__alpha_cix__) && defined(__alpha_fix__)
+	/* Whee.  EV67 can calculate it directly.  */
+	return __kernel_cttz(~word);
+#else
+	unsigned long bits, qofs, bofs;
+
+	bits = __kernel_cmpbge(word, ~0UL);
+	qofs = ffz_b(bits);
+	bits = __kernel_extbl(word, qofs);
+	bofs = ffz_b(bits);
+
+	return qofs*8 + bofs;
+#endif
+}
+
+/*
+ * __ffs = Find First set bit in word.  Undefined if no set bit exists.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+#if defined(__alpha_cix__) && defined(__alpha_fix__)
+	/* Whee.  EV67 can calculate it directly.  */
+	return __kernel_cttz(word);
+#else
+	unsigned long bits, qofs, bofs;
+
+	bits = __kernel_cmpbge(0, word);
+	qofs = ffz_b(bits);
+	bits = __kernel_extbl(word, qofs);
+	bofs = ffz_b(~bits);
+
+	return qofs*8 + bofs;
+#endif
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above __ffs.
+ */
+
+static inline int ffs(int word)
+{
+	int result = __ffs(word) + 1;
+	return word ? result : 0;
+}
+
+/*
+ * fls: find last bit set.
+ */
+#if defined(__alpha_cix__) && defined(__alpha_fix__)
+static inline int fls(int word)
+{
+	return 64 - __kernel_ctlz(word & 0xffffffff);
+}
+#else
+#define fls	generic_fls
+#endif
+
+/* Compute powers of two for the given integer.  */
+static inline long floor_log2(unsigned long word)
+{
+#if defined(__alpha_cix__) && defined(__alpha_fix__)
+	return 63 - __kernel_ctlz(word);
+#else
+	long bit;
+	for (bit = -1; word ; bit++)
+		word >>= 1;
+	return bit;
+#endif
+}
+
+static inline long ceil_log2(unsigned long word)
+{
+	long bit = floor_log2(word);
+	return bit + (word > (1UL << bit));
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#if defined(__alpha_cix__) && defined(__alpha_fix__)
+/* Whee.  EV67 can calculate it directly.  */
+static inline unsigned long hweight64(unsigned long w)
+{
+	return __kernel_ctpop(w);
+}
+
+#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+#else
+static inline unsigned long hweight64(unsigned long w)
+{
+	unsigned long result;
+	for (result = 0; w ; w >>= 1)
+		result += (w & 1);
+	return result;
+}
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x)  generic_hweight8(x)
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * Find next zero bit in a bitmap reasonably efficiently..
+ */
+static inline unsigned long
+find_next_zero_bit(const void *addr, unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr;
+	unsigned long result = offset & ~63UL;
+	unsigned long tmp;
+
+	p += offset >> 6;
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 63UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (64-offset);
+		if (size < 64)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 64;
+		result += 64;
+	}
+	while (size & ~63UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 64;
+		size -= 64;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+ found_first:
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)        /* Are any bits zero? */
+		return result + size; /* Nope. */
+ found_middle:
+	return result + ffz(tmp);
+}
+
+/*
+ * Find next one bit in a bitmap reasonably efficiently.
+ */
+static inline unsigned long
+find_next_bit(const void * addr, unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr;
+	unsigned long result = offset & ~63UL;
+	unsigned long tmp;
+
+	p += offset >> 6;
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 63UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp &= ~0UL << offset;
+		if (size < 64)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 64;
+		result += 64;
+	}
+	while (size & ~63UL) {
+		if ((tmp = *(p++)))
+			goto found_middle;
+		result += 64;
+		size -= 64;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+ found_first:
+	tmp &= ~0UL >> (64 - size);
+	if (!tmp)
+		return result + size;
+ found_middle:
+	return result + __ffs(tmp);
+}
+
+/*
+ * The optimizer actually does good code for this case.
+ */
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is set.
+ */
+static inline unsigned long
+sched_find_first_bit(unsigned long b[3])
+{
+	unsigned long b0 = b[0], b1 = b[1], b2 = b[2];
+	unsigned long ofs;
+
+	ofs = (b1 ? 64 : 128);
+	b1 = (b1 ? b1 : b2);
+	ofs = (b0 ? 0 : ofs);
+	b0 = (b0 ? b0 : b1);
+
+	return __ffs(b0) + ofs;
+}
+
+
+#define ext2_set_bit                 __test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)   test_and_set_bit(n,a)
+#define ext2_clear_bit               __test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
+#define ext2_test_bit                test_bit
+#define ext2_find_first_zero_bit     find_first_zero_bit
+#define ext2_find_next_zero_bit      find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) __set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ALPHA_BITOPS_H */
diff --git a/include/asm-alpha/bug.h b/include/asm-alpha/bug.h
new file mode 100644
index 000000000000..ae1e0a5fa492
--- /dev/null
+++ b/include/asm-alpha/bug.h
@@ -0,0 +1,15 @@
+#ifndef _ALPHA_BUG_H
+#define _ALPHA_BUG_H
+
+#include <asm/pal.h>
+
+/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
+   function loaded the GP, so this could fail in modules.  */
+#define BUG() \
+  __asm__ __volatile__("call_pal %0  # bugchk\n\t"".long %1\n\t.8byte %2" \
+		       : : "i" (PAL_bugchk), "i"(__LINE__), "i"(__FILE__))
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-alpha/bugs.h b/include/asm-alpha/bugs.h
new file mode 100644
index 000000000000..78030d1c7e7e
--- /dev/null
+++ b/include/asm-alpha/bugs.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-alpha/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any alpha bugs yet.. Nice chip
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-alpha/byteorder.h b/include/asm-alpha/byteorder.h
new file mode 100644
index 000000000000..7af2b8d25486
--- /dev/null
+++ b/include/asm-alpha/byteorder.h
@@ -0,0 +1,47 @@
+#ifndef _ALPHA_BYTEORDER_H
+#define _ALPHA_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+#include <asm/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline __attribute_const__ __u32 __arch__swab32(__u32 x)
+{
+	/*
+	 * Unfortunately, we can't use the 6 instruction sequence
+	 * on ev6 since the latency of the UNPKBW is 3, which is
+	 * pretty hard to hide.  Just in case a future implementation
+	 * has a lower latency, here's the sequence (also by Mike Burrows)
+	 *
+	 * UNPKBW a0, v0       v0: 00AA00BB00CC00DD
+	 * SLL v0, 24, a0      a0: BB00CC00DD000000
+	 * BIS v0, a0, a0      a0: BBAACCBBDDCC00DD
+	 * EXTWL a0, 6, v0     v0: 000000000000BBAA
+	 * ZAP a0, 0xf3, a0    a0: 00000000DDCC0000
+	 * ADDL a0, v0, v0     v0: ssssssssDDCCBBAA
+	 */
+
+	__u64 t0, t1, t2, t3;
+
+	t0 = __kernel_inslh(x, 7);	/* t0 : 0000000000AABBCC */
+	t1 = __kernel_inswl(x, 3);	/* t1 : 000000CCDD000000 */
+	t1 |= t0;			/* t1 : 000000CCDDAABBCC */
+	t2 = t1 >> 16;			/* t2 : 0000000000CCDDAA */
+	t0 = t1 & 0xFF00FF00;		/* t0 : 00000000DD00BB00 */
+	t3 = t2 & 0x00FF00FF;		/* t3 : 0000000000CC00AA */
+	t1 = t0 + t3;			/* t1 : ssssssssDDCCBBAA */
+
+	return t1;
+}
+
+#define __arch__swab32 __arch__swab32
+
+#endif /* __GNUC__ */
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ALPHA_BYTEORDER_H */
diff --git a/include/asm-alpha/cache.h b/include/asm-alpha/cache.h
new file mode 100644
index 000000000000..e69b29501a5f
--- /dev/null
+++ b/include/asm-alpha/cache.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-alpha/cache.h
+ */
+#ifndef __ARCH_ALPHA_CACHE_H
+#define __ARCH_ALPHA_CACHE_H
+
+#include <linux/config.h>
+
+/* Bytes per L1 (data) cache line. */
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EV6)
+# define L1_CACHE_BYTES     64
+# define L1_CACHE_SHIFT     6
+#else
+/* Both EV4 and EV5 are write-through, read-allocate,
+   direct-mapped, physical.
+*/
+# define L1_CACHE_BYTES     32
+# define L1_CACHE_SHIFT     5
+#endif
+
+#define L1_CACHE_ALIGN(x)  (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define SMP_CACHE_BYTES    L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX L1_CACHE_SHIFT
+
+#endif
diff --git a/include/asm-alpha/cacheflush.h b/include/asm-alpha/cacheflush.h
new file mode 100644
index 000000000000..3fc6ef726d8c
--- /dev/null
+++ b/include/asm-alpha/cacheflush.h
@@ -0,0 +1,74 @@
+#ifndef _ALPHA_CACHEFLUSH_H
+#define _ALPHA_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the Alpha. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+/* Note that the following two definitions are _highly_ dependent
+   on the contexts in which they are used in the kernel.  I personally
+   think it is criminal how loosely defined these macros are.  */
+
+/* We need to flush the kernel's icache after loading modules.  The
+   only other use of this macro is in load_aout_interp which is not
+   used on Alpha. 
+
+   Note that this definition should *not* be used for userspace
+   icache flushing.  While functional, it is _way_ overkill.  The
+   icache is tagged with ASNs and it suffices to allocate a new ASN
+   for the process.  */
+#ifndef CONFIG_SMP
+#define flush_icache_range(start, end)		imb()
+#else
+#define flush_icache_range(start, end)		smp_imb()
+extern void smp_imb(void);
+#endif
+
+/* We need to flush the userspace icache after setting breakpoints in
+   ptrace.
+
+   Instead of indiscriminately using imb, take advantage of the fact
+   that icache entries are tagged with the ASN and load a new mm context.  */
+/* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
+
+#ifndef CONFIG_SMP
+extern void __load_new_mm_context(struct mm_struct *);
+static inline void
+flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			unsigned long addr, int len)
+{
+	if (vma->vm_flags & VM_EXEC) {
+		struct mm_struct *mm = vma->vm_mm;
+		if (current->active_mm == mm)
+			__load_new_mm_context(mm);
+		else
+			mm->context[smp_processor_id()] = 0;
+	}
+}
+#else
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+		struct page *page, unsigned long addr, int len);
+#endif
+
+/* This is used only in do_no_page and do_swap_page.  */
+#define flush_icache_page(vma, page) \
+  flush_icache_user_range((vma), (page), 0, 0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ALPHA_CACHEFLUSH_H */
diff --git a/include/asm-alpha/checksum.h b/include/asm-alpha/checksum.h
new file mode 100644
index 000000000000..a5c9f08447fb
--- /dev/null
+++ b/include/asm-alpha/checksum.h
@@ -0,0 +1,77 @@
+#ifndef _ALPHA_CHECKSUM_H
+#define _ALPHA_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+extern unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern unsigned short int csum_tcpudp_magic(unsigned long saddr,
+					   unsigned long daddr,
+					   unsigned short len,
+					   unsigned short proto,
+					   unsigned int sum);
+
+unsigned int csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+				unsigned short len, unsigned short proto,
+				unsigned int sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+unsigned int csum_partial_copy_from_user(const char __user *src, char *dst, int len, unsigned int sum, int *errp);
+
+unsigned int csum_partial_copy_nocheck(const char *src, char *dst, int len, unsigned int sum);
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern unsigned short ip_compute_csum(unsigned char * buff, int len);
+
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+
+static inline unsigned short csum_fold(unsigned int sum)
+{
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return ~sum;
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+                                          struct in6_addr *daddr,
+                                          __u32 len,
+                                          unsigned short proto,
+                                          unsigned int sum);
+
+#endif
diff --git a/include/asm-alpha/compiler.h b/include/asm-alpha/compiler.h
new file mode 100644
index 000000000000..399c33b7be51
--- /dev/null
+++ b/include/asm-alpha/compiler.h
@@ -0,0 +1,103 @@
+#ifndef __ALPHA_COMPILER_H
+#define __ALPHA_COMPILER_H
+
+/* 
+ * Herein are macros we use when describing various patterns we want to GCC.
+ * In all cases we can get better schedules out of the compiler if we hide
+ * as little as possible inside inline assembly.  However, we want to be
+ * able to know what we'll get out before giving up inline assembly.  Thus
+ * these tests and macros.
+ */
+
+#if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
+# define __kernel_insbl(val, shift)	__builtin_alpha_insbl(val, shift)
+# define __kernel_inswl(val, shift)	__builtin_alpha_inswl(val, shift)
+# define __kernel_insql(val, shift)	__builtin_alpha_insql(val, shift)
+# define __kernel_inslh(val, shift)	__builtin_alpha_inslh(val, shift)
+# define __kernel_extbl(val, shift)	__builtin_alpha_extbl(val, shift)
+# define __kernel_extwl(val, shift)	__builtin_alpha_extwl(val, shift)
+# define __kernel_cmpbge(a, b)		__builtin_alpha_cmpbge(a, b)
+# define __kernel_cttz(x)		__builtin_ctzl(x)
+# define __kernel_ctlz(x)		__builtin_clzl(x)
+# define __kernel_ctpop(x)		__builtin_popcountl(x)
+#else
+# define __kernel_insbl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("insbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_inswl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("inswl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_insql(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("insql %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_inslh(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("inslh %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_extbl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("extbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_extwl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("extwl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_cmpbge(a, b)						\
+  ({ unsigned long __kir;						\
+     __asm__("cmpbge %r2,%1,%0" : "=r"(__kir) : "rI"(b), "rJ"(a));	\
+     __kir; })
+# define __kernel_cttz(x)						\
+  ({ unsigned long __kir;						\
+     __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x));			\
+     __kir; })
+# define __kernel_ctlz(x)						\
+  ({ unsigned long __kir;						\
+     __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x));			\
+     __kir; })
+# define __kernel_ctpop(x)						\
+  ({ unsigned long __kir;						\
+     __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x));			\
+     __kir; })
+#endif
+
+
+/* 
+ * Beginning with EGCS 1.1, GCC defines __alpha_bwx__ when the BWX 
+ * extension is enabled.  Previous versions did not define anything
+ * we could test during compilation -- too bad, so sad.
+ */
+
+#if defined(__alpha_bwx__)
+#define __kernel_ldbu(mem)	(mem)
+#define __kernel_ldwu(mem)	(mem)
+#define __kernel_stb(val,mem)	((mem) = (val))
+#define __kernel_stw(val,mem)	((mem) = (val))
+#else
+#define __kernel_ldbu(mem)				\
+  ({ unsigned char __kir;				\
+     __asm__("ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
+     __kir; })
+#define __kernel_ldwu(mem)				\
+  ({ unsigned short __kir;				\
+     __asm__("ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
+     __kir; })
+#define __kernel_stb(val,mem) \
+  __asm__("stb %1,%0" : "=m"(mem) : "r"(val))
+#define __kernel_stw(val,mem) \
+  __asm__("stw %1,%0" : "=m"(mem) : "r"(val))
+#endif
+
+/* Some idiots over in <linux/compiler.h> thought inline should imply
+   always_inline.  This breaks stuff.  We'll include this file whenever
+   we run into such problems.  */
+
+#include <linux/compiler.h>
+#undef inline
+#undef __inline__
+#undef __inline
+
+
+#endif /* __ALPHA_COMPILER_H */
diff --git a/include/asm-alpha/console.h b/include/asm-alpha/console.h
new file mode 100644
index 000000000000..a3ce4e62249b
--- /dev/null
+++ b/include/asm-alpha/console.h
@@ -0,0 +1,75 @@
+#ifndef __AXP_CONSOLE_H
+#define __AXP_CONSOLE_H
+
+/*
+ * Console callback routine numbers
+ */
+#define CCB_GETC		0x01
+#define CCB_PUTS		0x02
+#define CCB_RESET_TERM		0x03
+#define CCB_SET_TERM_INT	0x04
+#define CCB_SET_TERM_CTL	0x05
+#define CCB_PROCESS_KEYCODE	0x06
+#define CCB_OPEN_CONSOLE	0x07
+#define CCB_CLOSE_CONSOLE	0x08
+
+#define CCB_OPEN		0x10
+#define CCB_CLOSE		0x11
+#define CCB_IOCTL		0x12
+#define CCB_READ		0x13
+#define CCB_WRITE		0x14
+
+#define CCB_SET_ENV		0x20
+#define CCB_RESET_ENV		0x21
+#define CCB_GET_ENV		0x22
+#define CCB_SAVE_ENV		0x23
+
+#define CCB_PSWITCH		0x30
+#define CCB_BIOS_EMUL		0x32
+
+/*
+ * Environment variable numbers
+ */
+#define ENV_AUTO_ACTION		0x01
+#define ENV_BOOT_DEV		0x02
+#define ENV_BOOTDEF_DEV		0x03
+#define ENV_BOOTED_DEV		0x04
+#define ENV_BOOT_FILE		0x05
+#define ENV_BOOTED_FILE		0x06
+#define ENV_BOOT_OSFLAGS	0x07
+#define ENV_BOOTED_OSFLAGS	0x08
+#define ENV_BOOT_RESET		0x09
+#define ENV_DUMP_DEV		0x0A
+#define ENV_ENABLE_AUDIT	0x0B
+#define ENV_LICENSE		0x0C
+#define ENV_CHAR_SET		0x0D
+#define ENV_LANGUAGE		0x0E
+#define ENV_TTY_DEV		0x0F
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+extern long callback_puts(long unit, const char *s, long length);
+extern long callback_getc(long unit);
+extern long callback_open_console(void);
+extern long callback_close_console(void);
+extern long callback_open(const char *device, long length);
+extern long callback_close(long unit);
+extern long callback_read(long channel, long count, const char *buf, long lbn);
+extern long callback_getenv(long id, const char *buf, unsigned long buf_size);
+extern long callback_setenv(long id, const char *buf, unsigned long buf_size);
+extern long callback_save_env(void);
+
+extern int srm_fixup(unsigned long new_callback_addr,
+		     unsigned long new_hwrpb_addr);
+extern long srm_puts(const char *, long);
+extern long srm_printk(const char *, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+struct crb_struct;
+struct hwrpb_struct;
+extern int callback_init_done;
+extern void * callback_init(void *);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* __AXP_CONSOLE_H */
diff --git a/include/asm-alpha/core_apecs.h b/include/asm-alpha/core_apecs.h
new file mode 100644
index 000000000000..6785ff7e02bc
--- /dev/null
+++ b/include/asm-alpha/core_apecs.h
@@ -0,0 +1,517 @@
+#ifndef __ALPHA_APECS__H__
+#define __ALPHA_APECS__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * APECS is the internal name for the 2107x chipset which provides
+ * memory controller and PCI access for the 21064 chip based systems.
+ *
+ * This file is based on:
+ *
+ * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
+ * Data Sheet
+ *
+ * EC-N0648-72
+ *
+ *
+ * david.rusling@reo.mts.dec.com Initial Version.
+ *
+ */
+
+/*
+   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
+   that get passed through the PCI<->ISA bridge chip. So we've gotta use
+   both windows to max out the physical memory we can DMA to. Sigh...
+
+   If we try a window at 0 for 1GB as a work-around, we run into conflicts
+   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
+   BIOS ROMs. So we must put the windows high enough to avoid these areas.
+
+   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
+   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
+   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
+   be used for that range (via virt_to_bus()).
+
+   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
+   to keep virt_to_bus() from returning an address in the first window, for
+   a data area that goes beyond the 64Mb first DMA window.  Sigh...
+   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
+   we can't just use that here, because of header file looping... :-(
+
+   Window 1 will be used for all DMA from the ISA bus; yes, that does
+   limit what memory an ISA floppy or sound card or Ethernet can touch, but
+   it's also a known limitation on other platforms as well. We use the
+   same technique that is used on INTEL platforms with similar limitation:
+   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
+   We trust that any ISA bus device drivers will *always* ask for DMAable
+   memory explicitly via kmalloc()/get_free_pages() flags arguments.
+
+   Note that most PCI bus devices' drivers do *not* explicitly ask for
+   DMAable memory; they count on being able to DMA to any memory they
+   get from kmalloc()/get_free_pages(). They will also use window 1 for
+   any physical memory accesses below 64Mb; the rest will be handled by
+   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
+
+   We hope that the area before the first window is large enough so that
+   there will be no overlap at the top end (64Mb). We *must* locate the
+   PCI cards' memory just below window 1, so that there's still the
+   possibility of being able to access it via SPARSE space. This is
+   important for cards such as the Matrox Millennium, whose Xserver
+   wants to access memory-mapped registers in byte and short lengths.
+
+   Note that the XL is treated differently from the AVANTI, even though
+   for most other things they are identical. It didn't seem reasonable to
+   make the AVANTI support pay for the limitations of the XL. It is true,
+   however, that an XL kernel will run on an AVANTI without problems.
+
+   %%% All of this should be obviated by the ability to route
+   everything through the iommu.
+*/
+
+/*
+ * 21071-DA Control and Status registers.
+ * These are used for PCI memory access.
+ */
+#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
+#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
+#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
+#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
+#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
+#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
+
+#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
+#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
+
+#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
+#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
+
+#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
+#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
+
+#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
+#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
+#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
+
+#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
+
+#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
+#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
+#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
+#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
+#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
+#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
+#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
+#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
+
+#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
+#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
+#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
+#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
+#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
+#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
+#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
+#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
+
+#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
+
+
+/*
+ * 21071-CA Control and Status registers.
+ * These are used to program memory timing,
+ *  configure memory and initialise the B-Cache.
+ */
+#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
+#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
+#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
+#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
+#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
+#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
+#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
+#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
+#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
+#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
+#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
+#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
+#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
+
+/* Bank x Base Address Register */
+#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
+#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
+#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
+#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
+#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
+#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
+#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
+#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
+#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
+
+/* Bank x Configuration Register */
+#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
+#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
+#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
+#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
+#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
+#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
+#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
+#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
+#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
+
+/* Bank x Timing Register A */
+#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
+#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
+#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
+#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
+#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
+#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
+#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
+#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
+#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
+
+/* Bank x Timing Register B */
+#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
+#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
+#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
+#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
+#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
+#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
+#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
+#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
+#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
+
+
+/*
+ * Memory spaces:
+ */
+#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
+#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
+#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
+#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
+#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
+
+
+/*
+ * Bit definitions for I/O Controller status register 0:
+ */
+#define APECS_IOC_STAT0_CMD		0xf
+#define APECS_IOC_STAT0_ERR		(1<<4)
+#define APECS_IOC_STAT0_LOST		(1<<5)
+#define APECS_IOC_STAT0_THIT		(1<<6)
+#define APECS_IOC_STAT0_TREF		(1<<7)
+#define APECS_IOC_STAT0_CODE_SHIFT	8
+#define APECS_IOC_STAT0_CODE_MASK	0x7
+#define APECS_IOC_STAT0_P_NBR_SHIFT	13
+#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
+
+#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
+
+
+/*
+ * Data structure for handling APECS machine checks:
+ */
+
+struct el_apecs_mikasa_sysdata_mcheck
+{
+	unsigned long coma_gcr;
+	unsigned long coma_edsr;
+	unsigned long coma_ter;
+	unsigned long coma_elar;
+	unsigned long coma_ehar;
+	unsigned long coma_ldlr;
+	unsigned long coma_ldhr;
+	unsigned long coma_base0;
+	unsigned long coma_base1;
+	unsigned long coma_base2;
+	unsigned long coma_base3;
+	unsigned long coma_cnfg0;
+	unsigned long coma_cnfg1;
+	unsigned long coma_cnfg2;
+	unsigned long coma_cnfg3;
+	unsigned long epic_dcsr;
+	unsigned long epic_pear;
+	unsigned long epic_sear;
+	unsigned long epic_tbr1;
+	unsigned long epic_tbr2;
+	unsigned long epic_pbr1;
+	unsigned long epic_pbr2;
+	unsigned long epic_pmr1;
+	unsigned long epic_pmr2;
+	unsigned long epic_harx1;
+	unsigned long epic_harx2;
+	unsigned long epic_pmlt;
+	unsigned long epic_tag0;
+	unsigned long epic_tag1;
+	unsigned long epic_tag2;
+	unsigned long epic_tag3;
+	unsigned long epic_tag4;
+	unsigned long epic_tag5;
+	unsigned long epic_tag6;
+	unsigned long epic_tag7;
+	unsigned long epic_data0;
+	unsigned long epic_data1;
+	unsigned long epic_data2;
+	unsigned long epic_data3;
+	unsigned long epic_data4;
+	unsigned long epic_data5;
+	unsigned long epic_data6;
+	unsigned long epic_data7;
+
+	unsigned long pceb_vid;
+	unsigned long pceb_did;
+	unsigned long pceb_revision;
+	unsigned long pceb_command;
+	unsigned long pceb_status;
+	unsigned long pceb_latency;
+	unsigned long pceb_control;
+	unsigned long pceb_arbcon;
+	unsigned long pceb_arbpri;
+
+	unsigned long esc_id;
+	unsigned long esc_revision;
+	unsigned long esc_int0;
+	unsigned long esc_int1;
+	unsigned long esc_elcr0;
+	unsigned long esc_elcr1;
+	unsigned long esc_last_eisa;
+	unsigned long esc_nmi_stat;
+
+	unsigned long pci_ir;
+	unsigned long pci_imr;
+	unsigned long svr_mgr;
+};
+
+/* This for the normal APECS machines.  */
+struct el_apecs_sysdata_mcheck
+{
+	unsigned long coma_gcr;
+	unsigned long coma_edsr;
+	unsigned long coma_ter;
+	unsigned long coma_elar;
+	unsigned long coma_ehar;
+	unsigned long coma_ldlr;
+	unsigned long coma_ldhr;
+	unsigned long coma_base0;
+	unsigned long coma_base1;
+	unsigned long coma_base2;
+	unsigned long coma_cnfg0;
+	unsigned long coma_cnfg1;
+	unsigned long coma_cnfg2;
+	unsigned long epic_dcsr;
+	unsigned long epic_pear;
+	unsigned long epic_sear;
+	unsigned long epic_tbr1;
+	unsigned long epic_tbr2;
+	unsigned long epic_pbr1;
+	unsigned long epic_pbr2;
+	unsigned long epic_pmr1;
+	unsigned long epic_pmr2;
+	unsigned long epic_harx1;
+	unsigned long epic_harx2;
+	unsigned long epic_pmlt;
+	unsigned long epic_tag0;
+	unsigned long epic_tag1;
+	unsigned long epic_tag2;
+	unsigned long epic_tag3;
+	unsigned long epic_tag4;
+	unsigned long epic_tag5;
+	unsigned long epic_tag6;
+	unsigned long epic_tag7;
+	unsigned long epic_data0;
+	unsigned long epic_data1;
+	unsigned long epic_data2;
+	unsigned long epic_data3;
+	unsigned long epic_data4;
+	unsigned long epic_data5;
+	unsigned long epic_data6;
+	unsigned long epic_data7;
+};
+
+struct el_apecs_procdata
+{
+	unsigned long paltemp[32];  /* PAL TEMP REGS. */
+	/* EV4-specific fields */
+	unsigned long exc_addr;     /* Address of excepting instruction. */
+	unsigned long exc_sum;      /* Summary of arithmetic traps. */
+	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
+	unsigned long iccsr;        /* IBox hardware enables. */
+	unsigned long pal_base;     /* Base address for PALcode. */
+	unsigned long hier;         /* Hardware Interrupt Enable. */
+	unsigned long hirr;         /* Hardware Interrupt Request. */
+	unsigned long csr;          /* D-stream fault info. */
+	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
+	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
+	unsigned long abox_ctl;     /* ABox Control Register. */
+	unsigned long biu_stat;     /* BIU Status. */
+	unsigned long biu_addr;     /* BUI Address. */
+	unsigned long biu_ctl;      /* BIU Control. */
+	unsigned long fill_syndrome;/* For correcting ECC errors. */
+	unsigned long fill_addr;    /* Cache block which was being read */
+	unsigned long va;           /* Effective VA of fault or miss. */
+	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * Unlike Jensen, the APECS machines have no concept of local
+ * I/O---everything goes over the PCI bus.
+ *
+ * There is plenty room for optimization here.  In particular,
+ * the Alpha's insb/insw/extb/extw should be useful in moving
+ * data to/from the right byte-lanes.
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+#define APECS_SET_HAE						\
+	do {							\
+		if (addr >= (1UL << 24)) {			\
+			unsigned long msb = addr & 0xf8000000;	\
+			addr -= msb;				\
+			set_hae(msb);				\
+		}						\
+	} while (0)
+
+__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x00;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x00;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x00;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x00;
+	}
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x08;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x08;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x08;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x08;
+	}
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + APECS_IO);
+}
+
+__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
+					    unsigned long size)
+{
+	return (void __iomem *)(addr + APECS_DENSE_MEM);
+}
+
+__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x180000000UL;
+}
+
+__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= APECS_DENSE_MEM;
+}
+
+#undef APECS_SET_HAE
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		apecs
+#define apecs_trivial_io_bw	0
+#define apecs_trivial_io_lq	0
+#define apecs_trivial_rw_bw	2
+#define apecs_trivial_rw_lq	1
+#define apecs_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_APECS__H__ */
diff --git a/include/asm-alpha/core_cia.h b/include/asm-alpha/core_cia.h
new file mode 100644
index 000000000000..3a70d68bfce8
--- /dev/null
+++ b/include/asm-alpha/core_cia.h
@@ -0,0 +1,501 @@
+#ifndef __ALPHA_CIA__H__
+#define __ALPHA_CIA__H__
+
+/* Define to experiment with fitting everything into one 512MB HAE window.  */
+#define CIA_ONE_HAE_WINDOW 1
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * CIA is the internal name for the 21171 chipset which provides
+ * memory controller and PCI access for the 21164 chip based systems.
+ * Also supported here is the 21172 (CIA-2) and 21174 (PYXIS).
+ *
+ * The lineage is a bit confused, since the 21174 was reportedly started
+ * from the 21171 Pass 1 mask, and so is missing bug fixes that appear
+ * in 21171 Pass 2 and 21172, but it also contains additional features.
+ *
+ * This file is based on:
+ *
+ * DECchip 21171 Core Logic Chipset
+ * Technical Reference Manual
+ *
+ * EC-QE18B-TE
+ *
+ * david.rusling@reo.mts.dec.com Initial Version.
+ *
+ */
+
+/*
+ * CIA ADDRESS BIT DEFINITIONS
+ *
+ *  3333 3333 3322 2222 2222 1111 1111 11
+ *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  1                                             000
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  |                                             |\|
+ *  |                               Byte Enable --+ |
+ *  |                             Transfer Length --+
+ *  +-- IO space, not cached
+ *
+ *   Byte      Transfer
+ *   Enable    Length    Transfer  Byte    Address
+ *   adr<6:5>  adr<4:3>  Length    Enable  Adder
+ *   ---------------------------------------------
+ *      00        00      Byte      1110   0x000
+ *      01        00      Byte      1101   0x020
+ *      10        00      Byte      1011   0x040
+ *      11        00      Byte      0111   0x060
+ *
+ *      00        01      Word      1100   0x008
+ *      01        01      Word      1001   0x028 <= Not supported in this code.
+ *      10        01      Word      0011   0x048
+ *
+ *      00        10      Tribyte   1000   0x010
+ *      01        10      Tribyte   0001   0x030
+ *
+ *      10        11      Longword  0000   0x058
+ *
+ *      Note that byte enables are asserted low.
+ *
+ */
+
+#define CIA_MEM_R1_MASK 0x1fffffff  /* SPARSE Mem region 1 mask is 29 bits */
+#define CIA_MEM_R2_MASK 0x07ffffff  /* SPARSE Mem region 2 mask is 27 bits */
+#define CIA_MEM_R3_MASK 0x03ffffff  /* SPARSE Mem region 3 mask is 26 bits */
+
+/*
+ * 21171-CA Control and Status Registers
+ */
+#define CIA_IOC_CIA_REV			(IDENT_ADDR + 0x8740000080UL)
+#  define CIA_REV_MASK			0xff
+#define CIA_IOC_PCI_LAT			(IDENT_ADDR + 0x87400000C0UL)
+#define CIA_IOC_CIA_CTRL		(IDENT_ADDR + 0x8740000100UL)
+#  define CIA_CTRL_PCI_EN		(1 << 0)
+#  define CIA_CTRL_PCI_LOCK_EN		(1 << 1)
+#  define CIA_CTRL_PCI_LOOP_EN		(1 << 2)
+#  define CIA_CTRL_FST_BB_EN		(1 << 3)
+#  define CIA_CTRL_PCI_MST_EN		(1 << 4)
+#  define CIA_CTRL_PCI_MEM_EN		(1 << 5)
+#  define CIA_CTRL_PCI_REQ64_EN		(1 << 6)
+#  define CIA_CTRL_PCI_ACK64_EN		(1 << 7)
+#  define CIA_CTRL_ADDR_PE_EN		(1 << 8)
+#  define CIA_CTRL_PERR_EN		(1 << 9)
+#  define CIA_CTRL_FILL_ERR_EN		(1 << 10)
+#  define CIA_CTRL_MCHK_ERR_EN		(1 << 11)
+#  define CIA_CTRL_ECC_CHK_EN		(1 << 12)
+#  define CIA_CTRL_ASSERT_IDLE_BC	(1 << 13)
+#  define CIA_CTRL_COM_IDLE_BC		(1 << 14)
+#  define CIA_CTRL_CSR_IOA_BYPASS	(1 << 15)
+#  define CIA_CTRL_IO_FLUSHREQ_EN	(1 << 16)
+#  define CIA_CTRL_CPU_FLUSHREQ_EN	(1 << 17)
+#  define CIA_CTRL_ARB_CPU_EN		(1 << 18)
+#  define CIA_CTRL_EN_ARB_LINK		(1 << 19)
+#  define CIA_CTRL_RD_TYPE_SHIFT	20
+#  define CIA_CTRL_RL_TYPE_SHIFT	24
+#  define CIA_CTRL_RM_TYPE_SHIFT	28
+#  define CIA_CTRL_EN_DMA_RD_PERF	(1 << 31)
+#define CIA_IOC_CIA_CNFG		(IDENT_ADDR + 0x8740000140UL)
+#  define CIA_CNFG_IOA_BWEN		(1 << 0)
+#  define CIA_CNFG_PCI_MWEN		(1 << 4)
+#  define CIA_CNFG_PCI_DWEN		(1 << 5)
+#  define CIA_CNFG_PCI_WLEN		(1 << 8)
+#define CIA_IOC_FLASH_CTRL		(IDENT_ADDR + 0x8740000200UL)
+#define CIA_IOC_HAE_MEM			(IDENT_ADDR + 0x8740000400UL)
+#define CIA_IOC_HAE_IO			(IDENT_ADDR + 0x8740000440UL)
+#define CIA_IOC_CFG			(IDENT_ADDR + 0x8740000480UL)
+#define CIA_IOC_CACK_EN			(IDENT_ADDR + 0x8740000600UL)
+#  define CIA_CACK_EN_LOCK_EN		(1 << 0)
+#  define CIA_CACK_EN_MB_EN		(1 << 1)
+#  define CIA_CACK_EN_SET_DIRTY_EN	(1 << 2)
+#  define CIA_CACK_EN_BC_VICTIM_EN	(1 << 3)
+
+
+/*
+ * 21171-CA Diagnostic Registers
+ */
+#define CIA_IOC_CIA_DIAG		(IDENT_ADDR + 0x8740002000UL)
+#define CIA_IOC_DIAG_CHECK		(IDENT_ADDR + 0x8740003000UL)
+
+/*
+ * 21171-CA Performance Monitor registers
+ */
+#define CIA_IOC_PERF_MONITOR		(IDENT_ADDR + 0x8740004000UL)
+#define CIA_IOC_PERF_CONTROL		(IDENT_ADDR + 0x8740004040UL)
+
+/*
+ * 21171-CA Error registers
+ */
+#define CIA_IOC_CPU_ERR0		(IDENT_ADDR + 0x8740008000UL)
+#define CIA_IOC_CPU_ERR1		(IDENT_ADDR + 0x8740008040UL)
+#define CIA_IOC_CIA_ERR			(IDENT_ADDR + 0x8740008200UL)
+#  define CIA_ERR_COR_ERR		(1 << 0)
+#  define CIA_ERR_UN_COR_ERR		(1 << 1)
+#  define CIA_ERR_CPU_PE		(1 << 2)
+#  define CIA_ERR_MEM_NEM		(1 << 3)
+#  define CIA_ERR_PCI_SERR		(1 << 4)
+#  define CIA_ERR_PERR			(1 << 5)
+#  define CIA_ERR_PCI_ADDR_PE		(1 << 6)
+#  define CIA_ERR_RCVD_MAS_ABT		(1 << 7)
+#  define CIA_ERR_RCVD_TAR_ABT		(1 << 8)
+#  define CIA_ERR_PA_PTE_INV		(1 << 9)
+#  define CIA_ERR_FROM_WRT_ERR		(1 << 10)
+#  define CIA_ERR_IOA_TIMEOUT		(1 << 11)
+#  define CIA_ERR_LOST_CORR_ERR		(1 << 16)
+#  define CIA_ERR_LOST_UN_CORR_ERR	(1 << 17)
+#  define CIA_ERR_LOST_CPU_PE		(1 << 18)
+#  define CIA_ERR_LOST_MEM_NEM		(1 << 19)
+#  define CIA_ERR_LOST_PERR		(1 << 21)
+#  define CIA_ERR_LOST_PCI_ADDR_PE	(1 << 22)
+#  define CIA_ERR_LOST_RCVD_MAS_ABT	(1 << 23)
+#  define CIA_ERR_LOST_RCVD_TAR_ABT	(1 << 24)
+#  define CIA_ERR_LOST_PA_PTE_INV	(1 << 25)
+#  define CIA_ERR_LOST_FROM_WRT_ERR	(1 << 26)
+#  define CIA_ERR_LOST_IOA_TIMEOUT	(1 << 27)
+#  define CIA_ERR_VALID			(1 << 31)
+#define CIA_IOC_CIA_STAT		(IDENT_ADDR + 0x8740008240UL)
+#define CIA_IOC_ERR_MASK		(IDENT_ADDR + 0x8740008280UL)
+#define CIA_IOC_CIA_SYN			(IDENT_ADDR + 0x8740008300UL)
+#define CIA_IOC_MEM_ERR0		(IDENT_ADDR + 0x8740008400UL)
+#define CIA_IOC_MEM_ERR1		(IDENT_ADDR + 0x8740008440UL)
+#define CIA_IOC_PCI_ERR0		(IDENT_ADDR + 0x8740008800UL)
+#define CIA_IOC_PCI_ERR1		(IDENT_ADDR + 0x8740008840UL)
+#define CIA_IOC_PCI_ERR3		(IDENT_ADDR + 0x8740008880UL)
+
+/*
+ * 21171-CA System configuration registers
+ */
+#define CIA_IOC_MCR			(IDENT_ADDR + 0x8750000000UL)
+#define CIA_IOC_MBA0			(IDENT_ADDR + 0x8750000600UL)
+#define CIA_IOC_MBA2			(IDENT_ADDR + 0x8750000680UL)
+#define CIA_IOC_MBA4			(IDENT_ADDR + 0x8750000700UL)
+#define CIA_IOC_MBA6			(IDENT_ADDR + 0x8750000780UL)
+#define CIA_IOC_MBA8			(IDENT_ADDR + 0x8750000800UL)
+#define CIA_IOC_MBAA			(IDENT_ADDR + 0x8750000880UL)
+#define CIA_IOC_MBAC			(IDENT_ADDR + 0x8750000900UL)
+#define CIA_IOC_MBAE			(IDENT_ADDR + 0x8750000980UL)
+#define CIA_IOC_TMG0			(IDENT_ADDR + 0x8750000B00UL)
+#define CIA_IOC_TMG1			(IDENT_ADDR + 0x8750000B40UL)
+#define CIA_IOC_TMG2			(IDENT_ADDR + 0x8750000B80UL)
+
+/*
+ * 2117A-CA PCI Address and Scatter-Gather Registers.
+ */
+#define CIA_IOC_PCI_TBIA		(IDENT_ADDR + 0x8760000100UL)
+
+#define CIA_IOC_PCI_W0_BASE		(IDENT_ADDR + 0x8760000400UL)
+#define CIA_IOC_PCI_W0_MASK		(IDENT_ADDR + 0x8760000440UL)
+#define CIA_IOC_PCI_T0_BASE		(IDENT_ADDR + 0x8760000480UL)
+
+#define CIA_IOC_PCI_W1_BASE		(IDENT_ADDR + 0x8760000500UL)
+#define CIA_IOC_PCI_W1_MASK		(IDENT_ADDR + 0x8760000540UL)
+#define CIA_IOC_PCI_T1_BASE		(IDENT_ADDR + 0x8760000580UL)
+
+#define CIA_IOC_PCI_W2_BASE		(IDENT_ADDR + 0x8760000600UL)
+#define CIA_IOC_PCI_W2_MASK		(IDENT_ADDR + 0x8760000640UL)
+#define CIA_IOC_PCI_T2_BASE		(IDENT_ADDR + 0x8760000680UL)
+
+#define CIA_IOC_PCI_W3_BASE		(IDENT_ADDR + 0x8760000700UL)
+#define CIA_IOC_PCI_W3_MASK		(IDENT_ADDR + 0x8760000740UL)
+#define CIA_IOC_PCI_T3_BASE		(IDENT_ADDR + 0x8760000780UL)
+
+#define CIA_IOC_PCI_Wn_BASE(N)	(IDENT_ADDR + 0x8760000400UL + (N)*0x100) 
+#define CIA_IOC_PCI_Wn_MASK(N)	(IDENT_ADDR + 0x8760000440UL + (N)*0x100) 
+#define CIA_IOC_PCI_Tn_BASE(N)	(IDENT_ADDR + 0x8760000480UL + (N)*0x100) 
+
+#define CIA_IOC_PCI_W_DAC		(IDENT_ADDR + 0x87600007C0UL)
+
+/*
+ * 2117A-CA Address Translation Registers.
+ */
+
+/* 8 tag registers, the first 4 of which are lockable.  */
+#define CIA_IOC_TB_TAGn(n) \
+	(IDENT_ADDR + 0x8760000800UL + (n)*0x40)
+
+/* 4 page registers per tag register.  */
+#define CIA_IOC_TBn_PAGEm(n,m) \
+	(IDENT_ADDR + 0x8760001000UL + (n)*0x100 + (m)*0x40)
+
+/*
+ * Memory spaces:
+ */
+#define CIA_IACK_SC			(IDENT_ADDR + 0x8720000000UL)
+#define CIA_CONF			(IDENT_ADDR + 0x8700000000UL)
+#define CIA_IO				(IDENT_ADDR + 0x8580000000UL)
+#define CIA_SPARSE_MEM			(IDENT_ADDR + 0x8000000000UL)
+#define CIA_SPARSE_MEM_R2		(IDENT_ADDR + 0x8400000000UL)
+#define CIA_SPARSE_MEM_R3		(IDENT_ADDR + 0x8500000000UL)
+#define CIA_DENSE_MEM		        (IDENT_ADDR + 0x8600000000UL)
+#define CIA_BW_MEM			(IDENT_ADDR + 0x8800000000UL)
+#define CIA_BW_IO			(IDENT_ADDR + 0x8900000000UL)
+#define CIA_BW_CFG_0			(IDENT_ADDR + 0x8a00000000UL)
+#define CIA_BW_CFG_1			(IDENT_ADDR + 0x8b00000000UL)
+
+/*
+ * ALCOR's GRU ASIC registers
+ */
+#define GRU_INT_REQ			(IDENT_ADDR + 0x8780000000UL)
+#define GRU_INT_MASK			(IDENT_ADDR + 0x8780000040UL)
+#define GRU_INT_EDGE			(IDENT_ADDR + 0x8780000080UL)
+#define GRU_INT_HILO			(IDENT_ADDR + 0x87800000C0UL)
+#define GRU_INT_CLEAR			(IDENT_ADDR + 0x8780000100UL)
+
+#define GRU_CACHE_CNFG			(IDENT_ADDR + 0x8780000200UL)
+#define GRU_SCR				(IDENT_ADDR + 0x8780000300UL)
+#define GRU_LED				(IDENT_ADDR + 0x8780000800UL)
+#define GRU_RESET			(IDENT_ADDR + 0x8780000900UL)
+
+#define ALCOR_GRU_INT_REQ_BITS		0x800fffffUL
+#define XLT_GRU_INT_REQ_BITS		0x80003fffUL
+#define GRU_INT_REQ_BITS		(alpha_mv.sys.cia.gru_int_req_bits+0)
+
+/*
+ * PYXIS interrupt control registers
+ */
+#define PYXIS_INT_REQ			(IDENT_ADDR + 0x87A0000000UL)
+#define PYXIS_INT_MASK			(IDENT_ADDR + 0x87A0000040UL)
+#define PYXIS_INT_HILO			(IDENT_ADDR + 0x87A00000C0UL)
+#define PYXIS_INT_ROUTE			(IDENT_ADDR + 0x87A0000140UL)
+#define PYXIS_GPO			(IDENT_ADDR + 0x87A0000180UL)
+#define PYXIS_INT_CNFG			(IDENT_ADDR + 0x87A00001C0UL)
+#define PYXIS_RT_COUNT			(IDENT_ADDR + 0x87A0000200UL)
+#define PYXIS_INT_TIME			(IDENT_ADDR + 0x87A0000240UL)
+#define PYXIS_IIC_CTRL			(IDENT_ADDR + 0x87A00002C0UL)
+#define PYXIS_RESET			(IDENT_ADDR + 0x8780000900UL)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define PYXIS_DAC_OFFSET		(1UL << 40)
+
+/*
+ * Data structure for handling CIA machine checks.
+ */
+
+/* System-specific info.  */
+struct el_CIA_sysdata_mcheck {
+	unsigned long	cpu_err0;
+	unsigned long	cpu_err1;
+	unsigned long	cia_err;
+	unsigned long	cia_stat;
+	unsigned long	err_mask;
+	unsigned long	cia_syn;
+	unsigned long	mem_err0;
+	unsigned long	mem_err1;
+	unsigned long	pci_err0;
+	unsigned long	pci_err1;
+	unsigned long	pci_err2;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+/* Do not touch, this should *NOT* be static inline */
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * CIA (the 2117x PCI/memory support chipset for the EV5 (21164)
+ * series of processors uses a sparse address mapping scheme to
+ * get at PCI memory and I/O.
+ */
+
+/*
+ * Memory functions.  64-bit and 32-bit accesses are done through
+ * dense memory space, everything else through sparse space.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x00;
+	else
+		base_and_type = CIA_IO + 0x00;
+
+	/* We can use CIA_MEM_R1_MASK for io ports too, since it is large
+	   enough to cover all io ports, and smaller than CIA_IO.  */
+	addr &= CIA_MEM_R1_MASK;
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x00;
+	else
+		base_and_type = CIA_IO + 0x00;
+
+	addr &= CIA_MEM_R1_MASK;
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x08;
+	else
+		base_and_type = CIA_IO + 0x08;
+
+	addr &= CIA_MEM_R1_MASK;
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x08;
+	else
+		base_and_type = CIA_IO + 0x08;
+
+	addr &= CIA_MEM_R1_MASK;
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + CIA_IO);
+}
+
+__EXTERN_INLINE void __iomem *cia_ioremap(unsigned long addr,
+					  unsigned long size)
+{
+	return (void __iomem *)(addr + CIA_DENSE_MEM);
+}
+
+__EXTERN_INLINE int cia_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x8000000000UL;
+}
+
+__EXTERN_INLINE int cia_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= CIA_DENSE_MEM;
+}
+
+__EXTERN_INLINE void __iomem *cia_bwx_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + CIA_BW_IO);
+}
+
+__EXTERN_INLINE void __iomem *cia_bwx_ioremap(unsigned long addr,
+					      unsigned long size)
+{
+	return (void __iomem *)(addr + CIA_BW_MEM);
+}
+
+__EXTERN_INLINE int cia_bwx_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x8000000000UL;
+}
+
+__EXTERN_INLINE int cia_bwx_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr < CIA_BW_IO;
+}
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		cia
+#define cia_trivial_rw_bw	2
+#define cia_trivial_rw_lq	1
+#define cia_trivial_io_bw	0
+#define cia_trivial_io_lq	0
+#define cia_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		cia_bwx
+#define cia_bwx_trivial_rw_bw	1
+#define cia_bwx_trivial_rw_lq	1
+#define cia_bwx_trivial_io_bw	1
+#define cia_bwx_trivial_io_lq	1
+#define cia_bwx_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#undef __IO_PREFIX
+#ifdef CONFIG_ALPHA_PYXIS
+#define __IO_PREFIX		cia_bwx
+#else
+#define __IO_PREFIX		cia
+#endif
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_CIA__H__ */
diff --git a/include/asm-alpha/core_irongate.h b/include/asm-alpha/core_irongate.h
new file mode 100644
index 000000000000..24b2db541501
--- /dev/null
+++ b/include/asm-alpha/core_irongate.h
@@ -0,0 +1,232 @@
+#ifndef __ALPHA_IRONGATE__H__
+#define __ALPHA_IRONGATE__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * IRONGATE is the internal name for the AMD-751 K7 core logic chipset
+ * which provides memory controller and PCI access for NAUTILUS-based
+ * EV6 (21264) systems.
+ *
+ * This file is based on:
+ *
+ * IronGate management library, (c) 1999 Alpha Processor, Inc.
+ * Copyright (C) 1999 Alpha Processor, Inc.,
+ *	(David Daniel, Stig Telfer, Soohoon Lee)
+ */
+
+/*
+ * The 21264 supports, and internally recognizes, a 44-bit physical
+ * address space that is divided equally between memory address space
+ * and I/O address space. Memory address space resides in the lower
+ * half of the physical address space (PA[43]=0) and I/O address space
+ * resides in the upper half of the physical address space (PA[43]=1).
+ */
+
+/*
+ * Irongate CSR map.  Some of the CSRs are 8 or 16 bits, but all access
+ * through the routines given is 32-bit.
+ *
+ * The first 0x40 bytes are standard as per the PCI spec.
+ */
+
+typedef volatile __u32	igcsr32;
+
+typedef struct {
+	igcsr32 dev_vendor;		/* 0x00 - device ID, vendor ID */
+	igcsr32 stat_cmd;		/* 0x04 - status, command */
+	igcsr32 class;			/* 0x08 - class code, rev ID */
+	igcsr32 latency;		/* 0x0C - header type, PCI latency */
+	igcsr32 bar0;			/* 0x10 - BAR0 - AGP */
+	igcsr32 bar1;			/* 0x14 - BAR1 - GART */
+	igcsr32 bar2;			/* 0x18 - Power Management reg block */
+
+	igcsr32 rsrvd0[6];		/* 0x1C-0x33 reserved */
+
+	igcsr32 capptr;			/* 0x34 - Capabilities pointer */
+
+	igcsr32 rsrvd1[2];		/* 0x38-0x3F reserved */
+
+	igcsr32 bacsr10;		/* 0x40 - base address chip selects */
+	igcsr32 bacsr32;		/* 0x44 - base address chip selects */
+	igcsr32 bacsr54_eccms761;	/* 0x48 - 751: base addr. chip selects
+						  761: ECC, mode/status */
+
+	igcsr32 rsrvd2[1];		/* 0x4C-0x4F reserved */
+
+	igcsr32 drammap;		/* 0x50 - address mapping control */
+	igcsr32 dramtm;			/* 0x54 - timing, driver strength */
+	igcsr32 dramms;			/* 0x58 - DRAM mode/status */
+
+	igcsr32 rsrvd3[1];		/* 0x5C-0x5F reserved */
+
+	igcsr32 biu0;			/* 0x60 - bus interface unit */
+	igcsr32 biusip;			/* 0x64 - Serial initialisation pkt */
+
+	igcsr32 rsrvd4[2];		/* 0x68-0x6F reserved */
+
+	igcsr32 mro;			/* 0x70 - memory request optimiser */
+
+	igcsr32 rsrvd5[3];		/* 0x74-0x7F reserved */
+
+	igcsr32 whami;			/* 0x80 - who am I */
+	igcsr32 pciarb;			/* 0x84 - PCI arbitration control */
+	igcsr32 pcicfg;			/* 0x88 - PCI config status */
+
+	igcsr32 rsrvd6[4];		/* 0x8C-0x9B reserved */
+
+	igcsr32 pci_mem;		/* 0x9C - PCI top of memory,
+						  761 only */
+
+	/* AGP (bus 1) control registers */
+	igcsr32 agpcap;			/* 0xA0 - AGP Capability Identifier */
+	igcsr32 agpstat;		/* 0xA4 - AGP status register */
+	igcsr32 agpcmd;			/* 0xA8 - AGP control register */
+	igcsr32 agpva;			/* 0xAC - AGP Virtual Address Space */
+	igcsr32 agpmode;		/* 0xB0 - AGP/GART mode control */
+} Irongate0;
+
+
+typedef struct {
+
+	igcsr32 dev_vendor;		/* 0x00 - Device and Vendor IDs */
+	igcsr32 stat_cmd;		/* 0x04 - Status and Command regs */
+	igcsr32 class;			/* 0x08 - subclass, baseclass etc */
+	igcsr32 htype;			/* 0x0C - header type (at 0x0E) */
+	igcsr32 rsrvd0[2];		/* 0x10-0x17 reserved */
+	igcsr32 busnos;			/* 0x18 - Primary, secondary bus nos */
+	igcsr32 io_baselim_regs;	/* 0x1C - IO base, IO lim, AGP status */
+	igcsr32	mem_baselim;		/* 0x20 - memory base, memory lim */
+	igcsr32 pfmem_baselim;		/* 0x24 - prefetchable base, lim */
+	igcsr32 rsrvd1[2];		/* 0x28-0x2F reserved */
+	igcsr32 io_baselim;		/* 0x30 - IO base, IO limit */
+	igcsr32 rsrvd2[2];		/* 0x34-0x3B - reserved */
+	igcsr32 interrupt;		/* 0x3C - interrupt, PCI bridge ctrl */
+
+} Irongate1;
+
+extern igcsr32 *IronECC;
+
+/*
+ * Memory spaces:
+ */
+
+/* Irongate is consistent with a subset of the Tsunami memory map */
+#ifdef USE_48_BIT_KSEG
+#define IRONGATE_BIAS 0x80000000000UL
+#else
+#define IRONGATE_BIAS 0x10000000000UL
+#endif
+
+
+#define IRONGATE_MEM		(IDENT_ADDR | IRONGATE_BIAS | 0x000000000UL)
+#define IRONGATE_IACK_SC	(IDENT_ADDR | IRONGATE_BIAS | 0x1F8000000UL)
+#define IRONGATE_IO		(IDENT_ADDR | IRONGATE_BIAS | 0x1FC000000UL)
+#define IRONGATE_CONF		(IDENT_ADDR | IRONGATE_BIAS | 0x1FE000000UL)
+
+/*
+ * PCI Configuration space accesses are formed like so:
+ *
+ * 0x1FE << 24 |  : 2 2 2 2 1 1 1 1 : 1 1 1 1 1 1 0 0 : 0 0 0 0 0 0 0 0 :
+ *                : 3 2 1 0 9 8 7 6 : 5 4 3 2 1 0 9 8 : 7 6 5 4 3 2 1 0 :
+ *                  ---bus numer---   -device-- -fun-   ---register----
+ */
+
+#define IGCSR(dev,fun,reg)	( IRONGATE_CONF | \
+				((dev)<<11) | \
+				((fun)<<8) | \
+				(reg) )
+
+#define IRONGATE0		((Irongate0 *) IGCSR(0, 0, 0))
+#define IRONGATE1		((Irongate1 *) IGCSR(1, 0, 0))
+
+/*
+ * Data structure for handling IRONGATE machine checks:
+ * This is the standard OSF logout frame
+ */
+
+#define SCB_Q_SYSERR	0x620			/* OSF definitions */
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+
+struct el_IRONGATE_sysdata_mcheck {
+	__u32 FrameSize;                 /* Bytes, including this field */
+	__u32 FrameFlags;                /* <31> = Retry, <30> = Second Error */
+	__u32 CpuOffset;                 /* Offset to CPU-specific into */
+	__u32 SystemOffset;              /* Offset to system-specific info */
+	__u32 MCHK_Code;
+	__u32 MCHK_Frame_Rev;
+	__u64 I_STAT;
+	__u64 DC_STAT;
+	__u64 C_ADDR;
+	__u64 DC1_SYNDROME;
+	__u64 DC0_SYNDROME;
+	__u64 C_STAT;
+	__u64 C_STS;
+	__u64 RESERVED0;
+	__u64 EXC_ADDR;
+	__u64 IER_CM;
+	__u64 ISUM;
+	__u64 MM_STAT;
+	__u64 PAL_BASE;
+	__u64 I_CTL;
+	__u64 PCTX;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * IRONGATE (AMD-751) PCI/memory support chip for the EV6 (21264) and
+ * K7 can only use linear accesses to get at PCI memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  All accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *irongate_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + IRONGATE_IO);
+}
+
+extern void __iomem *irongate_ioremap(unsigned long addr, unsigned long size);
+extern void irongate_iounmap(volatile void __iomem *addr);
+
+__EXTERN_INLINE int irongate_is_ioaddr(unsigned long addr)
+{
+	return addr >= IRONGATE_MEM;
+}
+
+__EXTERN_INLINE int irongate_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+	return addr < IRONGATE_IO || addr >= IRONGATE_CONF;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX			irongate
+#define irongate_trivial_rw_bw		1
+#define irongate_trivial_rw_lq		1
+#define irongate_trivial_io_bw		1
+#define irongate_trivial_io_lq		1
+#define irongate_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_IRONGATE__H__ */
diff --git a/include/asm-alpha/core_lca.h b/include/asm-alpha/core_lca.h
new file mode 100644
index 000000000000..f7cb4b460954
--- /dev/null
+++ b/include/asm-alpha/core_lca.h
@@ -0,0 +1,361 @@
+#ifndef __ALPHA_LCA__H__
+#define __ALPHA_LCA__H__
+
+#include <asm/system.h>
+#include <asm/compiler.h>
+
+/*
+ * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
+ * for example).
+ *
+ * This file is based on:
+ *
+ *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
+ *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
+ *	Maynard, MA; Order Number: EC-N2681-71.
+ */
+
+/*
+ * NOTE: The LCA uses a Host Address Extension (HAE) register to access
+ *	 PCI addresses that are beyond the first 27 bits of address
+ *	 space.  Updating the HAE requires an external cycle (and
+ *	 a memory barrier), which tends to be slow.  Instead of updating
+ *	 it on each sparse memory access, we keep the current HAE value
+ *	 cached in variable cache_hae.  Only if the cached HAE differs
+ *	 from the desired HAE value do we actually updated HAE register.
+ *	 The HAE register is preserved by the interrupt handler entry/exit
+ *	 code, so this scheme works even in the presence of interrupts.
+ *
+ * Dense memory space doesn't require the HAE, but is restricted to
+ * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
+ * Acknowledge cycles may also require the use of the HAE.  The LCA
+ * limits I/O address space to the bottom 24 bits of address space,
+ * but this easily covers the 16 bit ISA I/O address space.
+ */
+
+/*
+ * NOTE 2! The memory operations do not set any memory barriers, as
+ * it's not needed for cases like a frame buffer that is essentially
+ * memory-like.  You need to do them by hand if the operations depend
+ * on ordering.
+ *
+ * Similarly, the port I/O operations do a "mb" only after a write
+ * operation: if an mb is needed before (as in the case of doing
+ * memory mapped I/O first, and then a port I/O operation to the same
+ * device), it needs to be done by hand.
+ *
+ * After the above has bitten me 100 times, I'll give up and just do
+ * the mb all the time, but right now I'm hoping this will work out.
+ * Avoiding mb's may potentially be a noticeable speed improvement,
+ * but I can't honestly say I've tested it.
+ *
+ * Handling interrupts that need to do mb's to synchronize to
+ * non-interrupts is another fun race area.  Don't do it (because if
+ * you do, I'll have to do *everything* with interrupts disabled,
+ * ugh).
+ */
+
+/*
+ * Memory Controller registers:
+ */
+#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
+#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
+#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
+#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
+#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
+#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
+#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
+#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
+#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
+#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
+#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
+#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
+#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
+#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
+#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
+#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
+#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
+#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
+#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
+
+/*
+ * I/O Controller registers:
+ */
+#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
+#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
+#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
+#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
+#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
+#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
+#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
+#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
+#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
+#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
+#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
+#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
+#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
+#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
+#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
+#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
+#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
+#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
+#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
+#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
+#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
+#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
+
+/*
+ * Memory spaces:
+ */
+#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
+#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
+#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
+#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
+#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
+
+/*
+ * Bit definitions for I/O Controller status register 0:
+ */
+#define LCA_IOC_STAT0_CMD		0xf
+#define LCA_IOC_STAT0_ERR		(1<<4)
+#define LCA_IOC_STAT0_LOST		(1<<5)
+#define LCA_IOC_STAT0_THIT		(1<<6)
+#define LCA_IOC_STAT0_TREF		(1<<7)
+#define LCA_IOC_STAT0_CODE_SHIFT	8
+#define LCA_IOC_STAT0_CODE_MASK		0x7
+#define LCA_IOC_STAT0_P_NBR_SHIFT	13
+#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
+
+#define LCA_HAE_ADDRESS		LCA_IOC_HAE
+
+/* LCA PMR Power Management register defines */
+#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
+#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
+#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
+#define LCA_PMR_INTO    0x40                    /* Interrupt override */
+#define LCA_PMR_DMAO    0x80                    /* DMA override */
+#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
+#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
+#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
+
+/* LCA PMR Macros */
+
+#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
+#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
+
+#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
+#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
+#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
+
+/* LCA PMR Divisor values */
+#define LCA_PMR_DIV_1   0x0
+#define LCA_PMR_DIV_1_5 0x1
+#define LCA_PMR_DIV_2   0x2
+#define LCA_PMR_DIV_4   0x3
+#define LCA_PMR_DIV_8   0x4
+#define LCA_PMR_DIV_16  0x5
+#define LCA_PMR_DIV_MIN DIV_1
+#define LCA_PMR_DIV_MAX DIV_16
+
+
+/*
+ * Data structure for handling LCA machine checks.  Correctable errors
+ * result in a short logout frame, uncorrectable ones in a long one.
+ */
+struct el_lca_mcheck_short {
+	struct el_common	h;		/* common logout header */
+	unsigned long		esr;		/* error-status register */
+	unsigned long		ear;		/* error-address register */
+	unsigned long		dc_stat;	/* dcache status register */
+	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
+	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
+};
+
+struct el_lca_mcheck_long {
+	struct el_common	h;		/* common logout header */
+	unsigned long		pt[31];		/* PAL temps */
+	unsigned long		exc_addr;	/* exception address */
+	unsigned long		pad1[3];
+	unsigned long		pal_base;	/* PALcode base address */
+	unsigned long		hier;		/* hw interrupt enable */
+	unsigned long		hirr;		/* hw interrupt request */
+	unsigned long		mm_csr;		/* MMU control & status */
+	unsigned long		dc_stat;	/* data cache status */
+	unsigned long		dc_addr;	/* data cache addr register */
+	unsigned long		abox_ctl;	/* address box control register */
+	unsigned long		esr;		/* error status register */
+	unsigned long		ear;		/* error address register */
+	unsigned long		car;		/* cache control register */
+	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
+	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
+	unsigned long		va;		/* virtual address register */
+};
+
+union el_lca {
+	struct el_common *		c;
+	struct el_lca_mcheck_long *	l;
+	struct el_lca_mcheck_short *	s;
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * Unlike Jensen, the Noname machines have no concept of local
+ * I/O---everything goes over the PCI bus.
+ *
+ * There is plenty room for optimization here.  In particular,
+ * the Alpha's insb/insw/extb/extw should be useful in moving
+ * data to/from the right byte-lanes.
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+#define LCA_SET_HAE						\
+	do {							\
+		if (addr >= (1UL << 24)) {			\
+			unsigned long msb = addr & 0xf8000000;	\
+			addr -= msb;				\
+			set_hae(msb);				\
+		}						\
+	} while (0)
+
+
+__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x00;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x00;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x00;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x00;
+	}
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x08;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x08;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x08;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x08;
+	}
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + LCA_IO);
+}
+
+__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
+					  unsigned long size)
+{
+	return (void __iomem *)(addr + LCA_DENSE_MEM);
+}
+
+__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x120000000UL;
+}
+
+__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= LCA_DENSE_MEM;
+}
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		lca
+#define lca_trivial_rw_bw	2
+#define lca_trivial_rw_lq	1
+#define lca_trivial_io_bw	0
+#define lca_trivial_io_lq	0
+#define lca_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_LCA__H__ */
diff --git a/include/asm-alpha/core_marvel.h b/include/asm-alpha/core_marvel.h
new file mode 100644
index 000000000000..30d55fe7aaf6
--- /dev/null
+++ b/include/asm-alpha/core_marvel.h
@@ -0,0 +1,378 @@
+/*
+ * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access
+ *
+ * This file is based on:
+ *
+ * Marvel / EV7 System Programmer's Manual
+ * Revision 1.00
+ * 14 May 2001
+ */
+
+#ifndef __ALPHA_MARVEL__H__
+#define __ALPHA_MARVEL__H__
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/compiler.h>
+
+#define MARVEL_MAX_PIDS		 32 /* as long as we rely on 43-bit superpage */
+#define MARVEL_IRQ_VEC_PE_SHIFT	(10)
+#define MARVEL_IRQ_VEC_IRQ_MASK	((1 << MARVEL_IRQ_VEC_PE_SHIFT) - 1)
+#define MARVEL_NR_IRQS		\
+	(16 + (MARVEL_MAX_PIDS * (1 << MARVEL_IRQ_VEC_PE_SHIFT)))
+
+/*
+ * EV7 RBOX Registers
+ */
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(16)));
+} ev7_csr;
+
+typedef struct {
+	ev7_csr	RBOX_CFG;		/* 0x0000 */
+	ev7_csr	RBOX_NSVC;
+	ev7_csr	RBOX_EWVC;
+	ev7_csr	RBOX_WHAMI;
+	ev7_csr	RBOX_TCTL;		/* 0x0040 */
+	ev7_csr	RBOX_INT;
+	ev7_csr	RBOX_IMASK;
+	ev7_csr	RBOX_IREQ;
+	ev7_csr	RBOX_INTQ;		/* 0x0080 */
+	ev7_csr	RBOX_INTA;
+	ev7_csr	RBOX_IT;
+	ev7_csr	RBOX_SCRATCH1;
+	ev7_csr	RBOX_SCRATCH2;		/* 0x00c0 */
+	ev7_csr	RBOX_L_ERR;
+} ev7_csrs;
+
+/*
+ * EV7 CSR addressing macros
+ */
+#define EV7_MASK40(addr)        ((addr) & ((1UL << 41) - 1))
+#define EV7_KERN_ADDR(addr)	((void *)(IDENT_ADDR | EV7_MASK40(addr)))
+
+#define EV7_PE_MASK		0x1ffUL /* 9 bits ( 256 + mem/io ) */
+#define EV7_IPE(pe)		((~((long)(pe)) & EV7_PE_MASK) << 35)
+
+#define EV7_CSR_PHYS(pe, off)	(EV7_IPE(pe) | (0x7FFCUL << 20) | (off))
+#define EV7_CSRS_PHYS(pe)	(EV7_CSR_PHYS(pe, 0UL))
+
+#define EV7_CSR_KERN(pe, off)	(EV7_KERN_ADDR(EV7_CSR_PHYS(pe, off)))
+#define EV7_CSRS_KERN(pe)	(EV7_KERN_ADDR(EV7_CSRS_PHYS(pe)))
+
+#define EV7_CSR_OFFSET(name)	((unsigned long)&((ev7_csrs *)NULL)->name.csr)
+
+/*
+ * IO7 registers
+ */
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} io7_csr;
+
+typedef struct {
+	/* I/O Port Control Registers */
+	io7_csr	POx_CTRL;	       	/* 0x0000 */
+	io7_csr	POx_CACHE_CTL;
+	io7_csr POx_TIMER;
+	io7_csr POx_IO_ADR_EXT;
+	io7_csr	POx_MEM_ADR_EXT;	/* 0x0100 */
+	io7_csr POx_XCAL_CTRL;
+	io7_csr rsvd1[2];	/* ?? spec doesn't show 0x180 */
+	io7_csr POx_DM_SOURCE;		/* 0x0200 */
+	io7_csr POx_DM_DEST;
+	io7_csr POx_DM_SIZE;
+	io7_csr POx_DM_CTRL;
+	io7_csr rsvd2[4];		/* 0x0300 */
+
+	/* AGP Control Registers -- port 3 only */
+	io7_csr AGP_CAP_ID;		/* 0x0400 */
+	io7_csr AGP_STAT;
+	io7_csr	AGP_CMD;
+	io7_csr	rsvd3;
+
+	/* I/O Port Monitor Registers */
+	io7_csr	POx_MONCTL;		/* 0x0500 */
+	io7_csr POx_CTRA;
+	io7_csr POx_CTRB;
+	io7_csr POx_CTR56;
+	io7_csr POx_SCRATCH;		/* 0x0600 */
+	io7_csr POx_XTRA_A;
+	io7_csr POx_XTRA_TS;
+	io7_csr POx_XTRA_Z;
+	io7_csr rsvd4;			/* 0x0700 */
+	io7_csr POx_THRESHA;
+	io7_csr POx_THRESHB;
+	io7_csr rsvd5[33];
+
+	/* System Address Space Window Control Registers */
+
+	io7_csr POx_WBASE[4];		/* 0x1000 */
+	io7_csr POx_WMASK[4];
+	io7_csr POx_TBASE[4];
+	io7_csr POx_SG_TBIA;
+	io7_csr POx_MSI_WBASE;
+	io7_csr rsvd6[50];
+
+	/* I/O Port Error Registers */
+	io7_csr POx_ERR_SUM;
+	io7_csr POx_FIRST_ERR;
+	io7_csr POx_MSK_HEI;
+	io7_csr POx_TLB_ERR;
+	io7_csr POx_SPL_COMPLT;
+	io7_csr POx_TRANS_SUM;
+	io7_csr POx_FRC_PCI_ERR;
+	io7_csr POx_MULT_ERR;
+	io7_csr rsvd7[8];
+
+	/* I/O Port End of Interrupt Registers */
+	io7_csr EOI_DAT;
+	io7_csr rsvd8[7];
+	io7_csr POx_IACK_SPECIAL;
+	io7_csr rsvd9[103];
+} io7_ioport_csrs;
+
+typedef struct {
+	io7_csr IO_ASIC_REV;		/* 0x30.0000 */
+	io7_csr IO_SYS_REV;
+	io7_csr SER_CHAIN3;
+	io7_csr PO7_RST1;
+	io7_csr PO7_RST2;		/* 0x30.0100 */
+	io7_csr POx_RST[4];
+	io7_csr IO7_DWNH;
+	io7_csr IO7_MAF;
+	io7_csr IO7_MAF_TO;
+	io7_csr IO7_ACC_CLUMP;		/* 0x30.0300 */
+	io7_csr IO7_PMASK;
+	io7_csr IO7_IOMASK;
+	io7_csr IO7_UPH;
+	io7_csr IO7_UPH_TO;		/* 0x30.0400 */
+	io7_csr RBX_IREQ_OFF;
+	io7_csr RBX_INTA_OFF;
+	io7_csr INT_RTY;
+	io7_csr PO7_MONCTL;		/* 0x30.0500 */
+	io7_csr PO7_CTRA;
+	io7_csr PO7_CTRB;
+	io7_csr PO7_CTR56;
+	io7_csr PO7_SCRATCH;		/* 0x30.0600 */
+	io7_csr PO7_XTRA_A;
+	io7_csr PO7_XTRA_TS;
+	io7_csr PO7_XTRA_Z;
+	io7_csr PO7_PMASK;		/* 0x30.0700 */
+	io7_csr PO7_THRESHA;
+	io7_csr PO7_THRESHB;
+	io7_csr rsvd1[97];
+	io7_csr PO7_ERROR_SUM;		/* 0x30.2000 */
+	io7_csr PO7_BHOLE_MASK;
+	io7_csr PO7_HEI_MSK;
+	io7_csr PO7_CRD_MSK;
+	io7_csr PO7_UNCRR_SYM;		/* 0x30.2100 */
+	io7_csr PO7_CRRCT_SYM;
+	io7_csr PO7_ERR_PKT[2];
+	io7_csr PO7_UGBGE_SYM;		/* 0x30.2200 */
+	io7_csr rsbv2[887];
+	io7_csr PO7_LSI_CTL[128];	/* 0x31.0000 */
+	io7_csr rsvd3[123];
+	io7_csr HLT_CTL;		/* 0x31.3ec0 */
+	io7_csr HPI_CTL;		/* 0x31.3f00 */
+	io7_csr CRD_CTL;
+	io7_csr STV_CTL;
+	io7_csr HEI_CTL;
+	io7_csr PO7_MSI_CTL[16];	/* 0x31.4000 */
+	io7_csr rsvd4[240];
+
+	/*
+	 * Interrupt Diagnostic / Test
+	 */
+	struct {
+		io7_csr INT_PND;
+		io7_csr INT_CLR;
+		io7_csr INT_EOI;
+		io7_csr rsvd[29];
+	} INT_DIAG[4];
+	io7_csr rsvd5[125];	    	/* 0x31.a000 */
+	io7_csr MISC_PND;		/* 0x31.b800 */
+	io7_csr rsvd6[31];
+	io7_csr MSI_PND[16];		/* 0x31.c000 */
+	io7_csr rsvd7[16];
+	io7_csr MSI_CLR[16];		/* 0x31.c800 */
+} io7_port7_csrs;
+
+/* 
+ * IO7 DMA Window Base register (POx_WBASEx)
+ */
+#define wbase_m_ena  0x1
+#define wbase_m_sg   0x2
+#define wbase_m_dac  0x4
+#define wbase_m_addr 0xFFF00000
+union IO7_POx_WBASE {
+	struct {
+		unsigned ena : 1;	/* <0>			*/
+		unsigned sg : 1;	/* <1>			*/
+		unsigned dac : 1;	/* <2> -- window 3 only */
+		unsigned rsvd1 : 17; 
+		unsigned addr : 12;	/* <31:20>		*/
+		unsigned rsvd2 : 32;
+	} bits;
+	unsigned as_long[2];
+	unsigned as_quad;
+};
+
+/*
+ * IO7 IID (Interrupt IDentifier) format
+ *
+ * For level-sensative interrupts, int_num is encoded as:
+ *
+ *	bus/port	slot/device	INTx
+ *	<7:5>		<4:2>		<1:0>
+ */
+union IO7_IID {
+	struct {
+		unsigned int_num : 9;		/* <8:0>    	*/
+		unsigned tpu_mask : 4;		/* <12:9> rsvd	*/
+		unsigned msi : 1;		/* 13		*/
+		unsigned ipe : 10;		/* <23:14>	*/
+		unsigned long rsvd : 40;		
+	} bits;
+	unsigned int as_long[2];
+	unsigned long as_quad;
+};
+
+/*
+ * IO7 addressing macros
+ */
+#define IO7_KERN_ADDR(addr)	(EV7_KERN_ADDR(addr))
+
+#define IO7_PORT_MASK	   	0x07UL	/* 3 bits of port 	   */
+
+#define IO7_IPE(pe)		(EV7_IPE(pe))
+#define IO7_IPORT(port)		((~((long)(port)) & IO7_PORT_MASK) << 32)
+
+#define IO7_HOSE(pe, port)	(IO7_IPE(pe) | IO7_IPORT(port))
+
+#define IO7_MEM_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0x00000000UL)
+#define IO7_CONF_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFE000000UL)
+#define IO7_IO_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFF000000UL)
+#define IO7_CSR_PHYS(pe, port, off) \
+                                (IO7_HOSE(pe, port) | 0xFF800000UL | (off))
+#define IO7_CSRS_PHYS(pe, port)	(IO7_CSR_PHYS(pe, port, 0UL))
+#define IO7_PORT7_CSRS_PHYS(pe) (IO7_CSR_PHYS(pe, 7, 0x300000UL))
+
+#define IO7_MEM_KERN(pe, port)      (IO7_KERN_ADDR(IO7_MEM_PHYS(pe, port)))
+#define IO7_CONF_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CONF_PHYS(pe, port)))
+#define IO7_IO_KERN(pe, port)       (IO7_KERN_ADDR(IO7_IO_PHYS(pe, port)))
+#define IO7_CSR_KERN(pe, port, off) (IO7_KERN_ADDR(IO7_CSR_PHYS(pe,port,off)))
+#define IO7_CSRS_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CSRS_PHYS(pe, port)))
+#define IO7_PORT7_CSRS_KERN(pe)	    (IO7_KERN_ADDR(IO7_PORT7_CSRS_PHYS(pe)))
+
+#define IO7_PLL_RNGA(pll)	(((pll) >> 3) & 0x7)
+#define IO7_PLL_RNGB(pll)	(((pll) >> 6) & 0x7)
+
+#define IO7_MEM_SPACE		(2UL * 1024 * 1024 * 1024)	/* 2GB MEM */
+#define IO7_IO_SPACE		(8UL * 1024 * 1024)		/* 8MB I/O */
+
+ 
+/* 
+ * Offset between ram physical addresses and pci64 DAC addresses
+ */
+#define IO7_DAC_OFFSET		(1UL << 49)
+
+/*
+ * This is needed to satisify the IO() macro used in initializing the machvec
+ */
+#define MARVEL_IACK_SC 							\
+        ((unsigned long)						\
+	 (&(((io7_ioport_csrs *)IO7_CSRS_KERN(0, 0))->POx_IACK_SPECIAL)))
+
+#ifdef __KERNEL__
+
+/*
+ * IO7 structs
+ */
+#define IO7_NUM_PORTS 4
+#define IO7_AGP_PORT  3
+
+struct io7_port {
+	struct io7 *io7;
+	struct pci_controller *hose;
+
+	int enabled;
+	unsigned int port;
+	io7_ioport_csrs *csrs;
+
+	unsigned long saved_wbase[4];
+	unsigned long saved_wmask[4];
+	unsigned long saved_tbase[4];
+};
+
+struct io7 {
+	struct io7 *next;
+
+	unsigned int pe;
+	io7_port7_csrs *csrs;
+	struct io7_port ports[IO7_NUM_PORTS];
+
+	spinlock_t irq_lock;
+};
+
+#ifndef __EXTERN_INLINE
+# define __EXTERN_INLINE extern inline
+# define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions. All access through linear space.
+ */
+
+/*
+ * Memory functions.  All accesses through linear space.
+ */
+
+#define vucp	volatile unsigned char __force *
+#define vusp	volatile unsigned short __force *
+
+extern unsigned int marvel_ioread8(void __iomem *);
+extern void marvel_iowrite8(u8 b, void __iomem *);
+
+__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr)
+{
+	return __kernel_ldwu(*(vusp)addr);
+}
+
+__EXTERN_INLINE void marvel_iowrite16(u16 b, void __iomem *addr)
+{
+	__kernel_stw(b, *(vusp)addr);
+}
+
+extern void __iomem *marvel_ioremap(unsigned long addr, unsigned long size);
+extern void marvel_iounmap(volatile void __iomem *addr);
+extern void __iomem *marvel_ioportmap (unsigned long addr);
+
+__EXTERN_INLINE int marvel_is_ioaddr(unsigned long addr)
+{
+	return (addr >> 40) & 1;
+}
+
+extern int marvel_is_mmio(const volatile void __iomem *);
+
+#undef vucp
+#undef vusp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		marvel
+#define marvel_trivial_rw_bw	1
+#define marvel_trivial_rw_lq	1
+#define marvel_trivial_io_bw	0
+#define marvel_trivial_io_lq	1
+#define marvel_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+# undef __EXTERN_INLINE
+# undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_MARVEL__H__ */
diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h
new file mode 100644
index 000000000000..980a3c51b18e
--- /dev/null
+++ b/include/asm-alpha/core_mcpcia.h
@@ -0,0 +1,379 @@
+#ifndef __ALPHA_MCPCIA__H__
+#define __ALPHA_MCPCIA__H__
+
+/* Define to experiment with fitting everything into one 128MB HAE window.
+   One window per bus, that is.  */
+#define MCPCIA_ONE_HAE_WINDOW 1
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/compiler.h>
+
+/*
+ * MCPCIA is the internal name for a core logic chipset which provides
+ * PCI access for the RAWHIDE family of systems.
+ *
+ * This file is based on:
+ *
+ * RAWHIDE System Programmer's Manual
+ * 16-May-96
+ * Rev. 1.4
+ *
+ */
+
+/*------------------------------------------------------------------------**
+**                                                                        **
+**  I/O procedures                                                        **
+**                                                                        **
+**      inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers             **
+**	inportbxt: 8 bits only                                            **
+**      inport:    alias of inportw                                       **
+**      outport:   alias of outportw                                      **
+**                                                                        **
+**      inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers       **
+**	inmembxt: 8 bits only                                             **
+**      inmem:    alias of inmemw                                         **
+**      outmem:   alias of outmemw                                        **
+**                                                                        **
+**------------------------------------------------------------------------*/
+
+
+/* MCPCIA ADDRESS BIT DEFINITIONS
+ *
+ *  3333 3333 3322 2222 2222 1111 1111 11
+ *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  1                                             000
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  |                                             |\|
+ *  |                               Byte Enable --+ |
+ *  |                             Transfer Length --+
+ *  +-- IO space, not cached
+ *
+ *   Byte      Transfer
+ *   Enable    Length    Transfer  Byte    Address
+ *   adr<6:5>  adr<4:3>  Length    Enable  Adder
+ *   ---------------------------------------------
+ *      00        00      Byte      1110   0x000
+ *      01        00      Byte      1101   0x020
+ *      10        00      Byte      1011   0x040
+ *      11        00      Byte      0111   0x060
+ *
+ *      00        01      Word      1100   0x008
+ *      01        01      Word      1001   0x028 <= Not supported in this code.
+ *      10        01      Word      0011   0x048
+ *
+ *      00        10      Tribyte   1000   0x010
+ *      01        10      Tribyte   0001   0x030
+ *
+ *      10        11      Longword  0000   0x058
+ *
+ *      Note that byte enables are asserted low.
+ *
+ */
+
+#define MCPCIA_MID(m)		((unsigned long)(m) << 33)
+
+/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively. 
+   Durango adds PCI2 and PCI3 at MID 6 and 7 respectively.  */
+#define MCPCIA_HOSE2MID(h)	((h) + 4)
+
+#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */
+
+/*
+ * Memory spaces:
+ */
+#define MCPCIA_SPARSE(m)	(IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE(m)		(IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m))
+#define MCPCIA_IO(m)		(IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m))
+#define MCPCIA_CONF(m)		(IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m))
+#define MCPCIA_CSR(m)		(IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m))
+#define MCPCIA_IO_IACK(m)	(IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE_IO(m)	(IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE_CONF(m)	(IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m))
+
+/*
+ *  General Registers
+ */
+#define MCPCIA_REV(m)		(MCPCIA_CSR(m) + 0x000)
+#define MCPCIA_WHOAMI(m)	(MCPCIA_CSR(m) + 0x040)
+#define MCPCIA_PCI_LAT(m)	(MCPCIA_CSR(m) + 0x080)
+#define MCPCIA_CAP_CTRL(m)	(MCPCIA_CSR(m) + 0x100)
+#define MCPCIA_HAE_MEM(m)	(MCPCIA_CSR(m) + 0x400)
+#define MCPCIA_HAE_IO(m)	(MCPCIA_CSR(m) + 0x440)
+#define _MCPCIA_IACK_SC(m)	(MCPCIA_CSR(m) + 0x480)
+#define MCPCIA_HAE_DENSE(m)	(MCPCIA_CSR(m) + 0x4C0)
+
+/*
+ * Interrupt Control registers
+ */
+#define MCPCIA_INT_CTL(m)	(MCPCIA_CSR(m) + 0x500)
+#define MCPCIA_INT_REQ(m)	(MCPCIA_CSR(m) + 0x540)
+#define MCPCIA_INT_TARG(m)	(MCPCIA_CSR(m) + 0x580)
+#define MCPCIA_INT_ADR(m)	(MCPCIA_CSR(m) + 0x5C0)
+#define MCPCIA_INT_ADR_EXT(m)	(MCPCIA_CSR(m) + 0x600)
+#define MCPCIA_INT_MASK0(m)	(MCPCIA_CSR(m) + 0x640)
+#define MCPCIA_INT_MASK1(m)	(MCPCIA_CSR(m) + 0x680)
+#define MCPCIA_INT_ACK0(m)	(MCPCIA_CSR(m) + 0x10003f00)
+#define MCPCIA_INT_ACK1(m)	(MCPCIA_CSR(m) + 0x10003f40)
+
+/*
+ * Performance Monitor registers
+ */
+#define MCPCIA_PERF_MON(m)	(MCPCIA_CSR(m) + 0x300)
+#define MCPCIA_PERF_CONT(m)	(MCPCIA_CSR(m) + 0x340)
+
+/*
+ * Diagnostic Registers
+ */
+#define MCPCIA_CAP_DIAG(m)	(MCPCIA_CSR(m) + 0x700)
+#define MCPCIA_TOP_OF_MEM(m)	(MCPCIA_CSR(m) + 0x7C0)
+
+/*
+ * Error registers
+ */
+#define MCPCIA_MC_ERR0(m)	(MCPCIA_CSR(m) + 0x800)
+#define MCPCIA_MC_ERR1(m)	(MCPCIA_CSR(m) + 0x840)
+#define MCPCIA_CAP_ERR(m)	(MCPCIA_CSR(m) + 0x880)
+#define MCPCIA_PCI_ERR1(m)	(MCPCIA_CSR(m) + 0x1040)
+#define MCPCIA_MDPA_STAT(m)	(MCPCIA_CSR(m) + 0x4000)
+#define MCPCIA_MDPA_SYN(m)	(MCPCIA_CSR(m) + 0x4040)
+#define MCPCIA_MDPA_DIAG(m)	(MCPCIA_CSR(m) + 0x4080)
+#define MCPCIA_MDPB_STAT(m)	(MCPCIA_CSR(m) + 0x8000)
+#define MCPCIA_MDPB_SYN(m)	(MCPCIA_CSR(m) + 0x8040)
+#define MCPCIA_MDPB_DIAG(m)	(MCPCIA_CSR(m) + 0x8080)
+
+/*
+ * PCI Address Translation Registers.
+ */
+#define MCPCIA_SG_TBIA(m)	(MCPCIA_CSR(m) + 0x1300)
+#define MCPCIA_HBASE(m)		(MCPCIA_CSR(m) + 0x1340)
+
+#define MCPCIA_W0_BASE(m)	(MCPCIA_CSR(m) + 0x1400)
+#define MCPCIA_W0_MASK(m)	(MCPCIA_CSR(m) + 0x1440)
+#define MCPCIA_T0_BASE(m)	(MCPCIA_CSR(m) + 0x1480)
+
+#define MCPCIA_W1_BASE(m)	(MCPCIA_CSR(m) + 0x1500)
+#define MCPCIA_W1_MASK(m)	(MCPCIA_CSR(m) + 0x1540)
+#define MCPCIA_T1_BASE(m)	(MCPCIA_CSR(m) + 0x1580)
+
+#define MCPCIA_W2_BASE(m)	(MCPCIA_CSR(m) + 0x1600)
+#define MCPCIA_W2_MASK(m)	(MCPCIA_CSR(m) + 0x1640)
+#define MCPCIA_T2_BASE(m)	(MCPCIA_CSR(m) + 0x1680)
+
+#define MCPCIA_W3_BASE(m)	(MCPCIA_CSR(m) + 0x1700)
+#define MCPCIA_W3_MASK(m)	(MCPCIA_CSR(m) + 0x1740)
+#define MCPCIA_T3_BASE(m)	(MCPCIA_CSR(m) + 0x1780)
+
+/* Hack!  Only words for bus 0.  */
+
+#ifndef MCPCIA_ONE_HAE_WINDOW
+#define MCPCIA_HAE_ADDRESS	MCPCIA_HAE_MEM(4)
+#endif
+#define MCPCIA_IACK_SC		_MCPCIA_IACK_SC(4)
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define MCPCIA_IO_BIAS		MCPCIA_IO(4)
+#define MCPCIA_MEM_BIAS		MCPCIA_DENSE(4)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define MCPCIA_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling MCPCIA machine checks:
+ */
+struct el_MCPCIA_uncorrected_frame_mcheck {
+	struct el_common header;
+	struct el_common_EV5_uncorrectable_mcheck procdata;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164)
+ * and EV56 (21164a) processors, can use either a sparse address mapping
+ * scheme, or the so-called byte-word PCI address space, to get at PCI memory
+ * and I/O.
+ *
+ * Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE.
+ */
+
+/*
+ * Memory functions.  64-bit and 32-bit accesses are done through
+ * dense memory space, everything else through sparse space.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+
+#ifdef MCPCIA_ONE_HAE_WINDOW
+#define MCPCIA_FROB_MMIO						\
+	if (__mcpcia_is_mmio(hose)) {					\
+		set_hae(hose & 0xffffffff);				\
+		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
+	}
+#else
+#define MCPCIA_FROB_MMIO						\
+	if (__mcpcia_is_mmio(hose)) {					\
+		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
+	}
+#endif
+
+static inline int __mcpcia_is_mmio(unsigned long addr)
+{
+	return (addr & 0x80000000UL) == 0;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long result;
+
+	MCPCIA_FROB_MMIO;
+
+	result = *(vip) ((addr << 5) + hose + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long w;
+
+	MCPCIA_FROB_MMIO;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + hose + 0x00) = w;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long result;
+
+	MCPCIA_FROB_MMIO;
+
+	result = *(vip) ((addr << 5) + hose + 0x08);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long w;
+
+	MCPCIA_FROB_MMIO;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + hose + 0x08) = w;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vuip)addr = b;
+}
+
+
+__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + MCPCIA_IO_BIAS);
+}
+
+__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr,
+					     unsigned long size)
+{
+	return (void __iomem *)(addr + MCPCIA_MEM_BIAS);
+}
+
+__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr)
+{
+	return addr >= MCPCIA_SPARSE(0);
+}
+
+__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	return __mcpcia_is_mmio(addr);
+}
+
+#undef MCPCIA_FROB_MMIO
+
+#undef vip
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		mcpcia
+#define mcpcia_trivial_rw_bw	2
+#define mcpcia_trivial_rw_lq	1
+#define mcpcia_trivial_io_bw	0
+#define mcpcia_trivial_io_lq	0
+#define mcpcia_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_MCPCIA__H__ */
diff --git a/include/asm-alpha/core_polaris.h b/include/asm-alpha/core_polaris.h
new file mode 100644
index 000000000000..2f966b64659d
--- /dev/null
+++ b/include/asm-alpha/core_polaris.h
@@ -0,0 +1,110 @@
+#ifndef __ALPHA_POLARIS__H__
+#define __ALPHA_POLARIS__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * POLARIS is the internal name for a core logic chipset which provides
+ * memory controller and PCI access for the 21164PC chip based systems.
+ *
+ * This file is based on:
+ *
+ * Polaris System Controller
+ * Device Functional Specification
+ * 22-Jan-98
+ * Rev. 4.2
+ *
+ */
+
+/* Polaris memory regions */
+#define POLARIS_SPARSE_MEM_BASE		(IDENT_ADDR + 0xf800000000UL)
+#define POLARIS_DENSE_MEM_BASE		(IDENT_ADDR + 0xf900000000UL)
+#define POLARIS_SPARSE_IO_BASE		(IDENT_ADDR + 0xf980000000UL)
+#define POLARIS_SPARSE_CONFIG_BASE	(IDENT_ADDR + 0xf9c0000000UL)
+#define POLARIS_IACK_BASE		(IDENT_ADDR + 0xf9f8000000UL)
+#define POLARIS_DENSE_IO_BASE		(IDENT_ADDR + 0xf9fc000000UL)
+#define POLARIS_DENSE_CONFIG_BASE	(IDENT_ADDR + 0xf9fe000000UL)
+
+#define POLARIS_IACK_SC			POLARIS_IACK_BASE
+
+/* The Polaris command/status registers live in PCI Config space for
+ * bus 0/device 0.  As such, they may be bytes, words, or doublewords.
+ */
+#define POLARIS_W_VENID		(POLARIS_DENSE_CONFIG_BASE)
+#define POLARIS_W_DEVID		(POLARIS_DENSE_CONFIG_BASE+2)
+#define POLARIS_W_CMD		(POLARIS_DENSE_CONFIG_BASE+4)
+#define POLARIS_W_STATUS	(POLARIS_DENSE_CONFIG_BASE+6)
+
+/*
+ * Data structure for handling POLARIS machine checks:
+ */
+struct el_POLARIS_sysdata_mcheck {
+    u_long      psc_status;
+    u_long	psc_pcictl0;
+    u_long	psc_pcictl1;
+    u_long	psc_pcictl2;
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * POLARIS, the PCI/memory support chipset for the PCA56 (21164PC)
+ * processors, can use either a sparse address  mapping scheme, or the 
+ * so-called byte-word PCI address space, to get at PCI memory and I/O.
+ *
+ * However, we will support only the BWX form.
+ */
+
+/*
+ * Memory functions.  Polaris allows all accesses (byte/word
+ * as well as long/quad) to be done through dense space.
+ *
+ * We will only support DENSE access via BWX insns.
+ */
+
+__EXTERN_INLINE void __iomem *polaris_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + POLARIS_DENSE_IO_BASE);
+}
+
+__EXTERN_INLINE void __iomem *polaris_ioremap(unsigned long addr,
+					      unsigned long size)
+{
+	return (void __iomem *)(addr + POLARIS_DENSE_MEM_BASE);
+}
+
+__EXTERN_INLINE int polaris_is_ioaddr(unsigned long addr)
+{
+	return addr >= POLARIS_SPARSE_MEM_BASE;
+}
+
+__EXTERN_INLINE int polaris_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr < POLARIS_SPARSE_IO_BASE;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		polaris
+#define polaris_trivial_rw_bw	1
+#define polaris_trivial_rw_lq	1
+#define polaris_trivial_io_bw	1
+#define polaris_trivial_io_lq	1
+#define polaris_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_POLARIS__H__ */
diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h
new file mode 100644
index 000000000000..5c1c40338c82
--- /dev/null
+++ b/include/asm-alpha/core_t2.h
@@ -0,0 +1,628 @@
+#ifndef __ALPHA_T2__H__
+#define __ALPHA_T2__H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/compiler.h>
+#include <asm/system.h>
+
+/*
+ * T2 is the internal name for the core logic chipset which provides
+ * memory controller and PCI access for the SABLE-based systems.
+ *
+ * This file is based on:
+ *
+ * SABLE I/O Specification
+ * Revision/Update Information: 1.3
+ *
+ * jestabro@amt.tay1.dec.com Initial Version.
+ *
+ */
+
+#define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 26 bits */
+
+/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
+/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
+#define _GAMMA_BIAS		0x8000000000UL
+
+#if defined(CONFIG_ALPHA_GENERIC)
+#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
+#elif defined(CONFIG_ALPHA_GAMMA)
+#define GAMMA_BIAS		_GAMMA_BIAS
+#else
+#define GAMMA_BIAS		0
+#endif
+
+/*
+ * Memory spaces:
+ */
+#define T2_CONF		        (IDENT_ADDR + GAMMA_BIAS + 0x390000000UL)
+#define T2_IO			(IDENT_ADDR + GAMMA_BIAS + 0x3a0000000UL)
+#define T2_SPARSE_MEM		(IDENT_ADDR + GAMMA_BIAS + 0x200000000UL)
+#define T2_DENSE_MEM	        (IDENT_ADDR + GAMMA_BIAS + 0x3c0000000UL)
+
+#define T2_IOCSR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000000UL)
+#define T2_CERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000020UL)
+#define T2_CERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000040UL)
+#define T2_CERR3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000060UL)
+#define T2_PERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000080UL)
+#define T2_PERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000a0UL)
+#define T2_PSCR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0000c0UL)
+#define T2_HAE_1		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000e0UL)
+#define T2_HAE_2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000100UL)
+#define T2_HBASE		(IDENT_ADDR + GAMMA_BIAS + 0x38e000120UL)
+#define T2_WBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000140UL)
+#define T2_WMASK1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000160UL)
+#define T2_TBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000180UL)
+#define T2_WBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001a0UL)
+#define T2_WMASK2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001c0UL)
+#define T2_TBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001e0UL)
+#define T2_TLBBR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000200UL)
+#define T2_IVR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000220UL)
+#define T2_HAE_3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000240UL)
+#define T2_HAE_4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000260UL)
+
+/* The CSRs below are T3/T4 only */
+#define T2_WBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000280UL)
+#define T2_WMASK3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002a0UL)
+#define T2_TBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002c0UL)
+
+#define T2_TDR0			(IDENT_ADDR + GAMMA_BIAS + 0x38e000300UL)
+#define T2_TDR1			(IDENT_ADDR + GAMMA_BIAS + 0x38e000320UL)
+#define T2_TDR2			(IDENT_ADDR + GAMMA_BIAS + 0x38e000340UL)
+#define T2_TDR3			(IDENT_ADDR + GAMMA_BIAS + 0x38e000360UL)
+#define T2_TDR4			(IDENT_ADDR + GAMMA_BIAS + 0x38e000380UL)
+#define T2_TDR5			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003a0UL)
+#define T2_TDR6			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003c0UL)
+#define T2_TDR7			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003e0UL)
+
+#define T2_WBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000400UL)
+#define T2_WMASK4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000420UL)
+#define T2_TBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000440UL)
+
+#define T2_AIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000460UL)
+#define T2_VAR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000480UL)
+#define T2_DIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004a0UL)
+#define T2_ICE			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004c0UL)
+
+#define T2_HAE_ADDRESS		T2_HAE_1
+
+/*  T2 CSRs are in the non-cachable primary IO space from 3.8000.0000 to
+ 3.8fff.ffff
+ *
+ *  +--------------+ 3 8000 0000
+ *  | CPU 0 CSRs   |
+ *  +--------------+ 3 8100 0000
+ *  | CPU 1 CSRs   |
+ *  +--------------+ 3 8200 0000
+ *  | CPU 2 CSRs   |
+ *  +--------------+ 3 8300 0000
+ *  | CPU 3 CSRs   |
+ *  +--------------+ 3 8400 0000
+ *  | CPU Reserved |
+ *  +--------------+ 3 8700 0000
+ *  | Mem Reserved |
+ *  +--------------+ 3 8800 0000
+ *  | Mem 0 CSRs   |
+ *  +--------------+ 3 8900 0000
+ *  | Mem 1 CSRs   |
+ *  +--------------+ 3 8a00 0000
+ *  | Mem 2 CSRs   |
+ *  +--------------+ 3 8b00 0000
+ *  | Mem 3 CSRs   |
+ *  +--------------+ 3 8c00 0000
+ *  | Mem Reserved |
+ *  +--------------+ 3 8e00 0000
+ *  | PCI Bridge   |
+ *  +--------------+ 3 8f00 0000
+ *  | Expansion IO |
+ *  +--------------+ 3 9000 0000
+ *
+ *
+ */
+#define T2_CPU0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x380000000L)
+#define T2_CPU1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x381000000L)
+#define T2_CPU2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x382000000L)
+#define T2_CPU3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x383000000L)
+
+#define T2_CPUn_BASE(n)		(T2_CPU0_BASE + (((n)&3) * 0x001000000L))
+
+#define T2_MEM0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x388000000L)
+#define T2_MEM1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x389000000L)
+#define T2_MEM2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38a000000L)
+#define T2_MEM3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38b000000L)
+
+
+/*
+ * Sable CPU Module CSRS
+ *
+ * These are CSRs for hardware other than the CPU chip on the CPU module.
+ * The CPU module has Backup Cache control logic, Cbus control logic, and
+ * interrupt control logic on it.  There is a duplicate tag store to speed
+ * up maintaining cache coherency.
+ */
+
+struct sable_cpu_csr {
+  unsigned long bcc;     long fill_00[3]; /* Backup Cache Control */
+  unsigned long bcce;    long fill_01[3]; /* Backup Cache Correctable Error */
+  unsigned long bccea;   long fill_02[3]; /* B-Cache Corr Err Address Latch */
+  unsigned long bcue;    long fill_03[3]; /* B-Cache Uncorrectable Error */
+  unsigned long bcuea;   long fill_04[3]; /* B-Cache Uncorr Err Addr Latch */
+  unsigned long dter;    long fill_05[3]; /* Duplicate Tag Error */
+  unsigned long cbctl;   long fill_06[3]; /* CBus Control */
+  unsigned long cbe;     long fill_07[3]; /* CBus Error */
+  unsigned long cbeal;   long fill_08[3]; /* CBus Error Addr Latch low */
+  unsigned long cbeah;   long fill_09[3]; /* CBus Error Addr Latch high */
+  unsigned long pmbx;    long fill_10[3]; /* Processor Mailbox */
+  unsigned long ipir;    long fill_11[3]; /* Inter-Processor Int Request */
+  unsigned long sic;     long fill_12[3]; /* System Interrupt Clear */
+  unsigned long adlk;    long fill_13[3]; /* Address Lock (LDxL/STxC) */
+  unsigned long madrl;   long fill_14[3]; /* CBus Miss Address */
+  unsigned long rev;     long fill_15[3]; /* CMIC Revision */
+};
+
+/*
+ * Data structure for handling T2 machine checks:
+ */
+struct el_t2_frame_header {
+	unsigned int	elcf_fid;	/* Frame ID (from above) */
+	unsigned int	elcf_size;	/* Size of frame in bytes */
+};
+
+struct el_t2_procdata_mcheck {
+	unsigned long	elfmc_paltemp[32];	/* PAL TEMP REGS. */
+	/* EV4-specific fields */
+	unsigned long	elfmc_exc_addr;	/* Addr of excepting insn. */
+	unsigned long	elfmc_exc_sum;	/* Summary of arith traps. */
+	unsigned long	elfmc_exc_mask;	/* Exception mask (from exc_sum). */
+	unsigned long	elfmc_iccsr;	/* IBox hardware enables. */
+	unsigned long	elfmc_pal_base;	/* Base address for PALcode. */
+	unsigned long	elfmc_hier;	/* Hardware Interrupt Enable. */
+	unsigned long	elfmc_hirr;	/* Hardware Interrupt Request. */
+	unsigned long	elfmc_mm_csr;	/* D-stream fault info. */
+	unsigned long	elfmc_dc_stat;	/* D-cache status (ECC/Parity Err). */
+	unsigned long	elfmc_dc_addr;	/* EV3 Phys Addr for ECC/DPERR. */
+	unsigned long	elfmc_abox_ctl;	/* ABox Control Register. */
+	unsigned long	elfmc_biu_stat;	/* BIU Status. */
+	unsigned long	elfmc_biu_addr;	/* BUI Address. */
+	unsigned long	elfmc_biu_ctl;	/* BIU Control. */
+	unsigned long	elfmc_fill_syndrome; /* For correcting ECC errors. */
+	unsigned long	elfmc_fill_addr;/* Cache block which was being read. */
+	unsigned long	elfmc_va;	/* Effective VA of fault or miss. */
+	unsigned long	elfmc_bc_tag;	/* Backup Cache Tag Probe Results. */
+};
+
+/*
+ * Sable processor specific Machine Check Data segment.
+ */
+
+struct el_t2_logout_header {
+	unsigned int	elfl_size;	/* size in bytes of logout area. */
+	unsigned int	elfl_sbz1:31;	/* Should be zero. */
+	unsigned int	elfl_retry:1;	/* Retry flag. */
+	unsigned int	elfl_procoffset; /* Processor-specific offset. */
+	unsigned int	elfl_sysoffset;	 /* Offset of system-specific. */
+	unsigned int	elfl_error_type;	/* PAL error type code. */
+	unsigned int	elfl_frame_rev;		/* PAL Frame revision. */
+};
+struct el_t2_sysdata_mcheck {
+	unsigned long    elcmc_bcc;	      /* CSR 0 */
+	unsigned long    elcmc_bcce;	      /* CSR 1 */
+	unsigned long    elcmc_bccea;      /* CSR 2 */
+	unsigned long    elcmc_bcue;	      /* CSR 3 */
+	unsigned long    elcmc_bcuea;      /* CSR 4 */
+	unsigned long    elcmc_dter;	      /* CSR 5 */
+	unsigned long    elcmc_cbctl;      /* CSR 6 */
+	unsigned long    elcmc_cbe;	      /* CSR 7 */
+	unsigned long    elcmc_cbeal;      /* CSR 8 */
+	unsigned long    elcmc_cbeah;      /* CSR 9 */
+	unsigned long    elcmc_pmbx;	      /* CSR 10 */
+	unsigned long    elcmc_ipir;	      /* CSR 11 */
+	unsigned long    elcmc_sic;	      /* CSR 12 */
+	unsigned long    elcmc_adlk;	      /* CSR 13 */
+	unsigned long    elcmc_madrl;      /* CSR 14 */
+	unsigned long    elcmc_crrev4;     /* CSR 15 */
+};
+
+/*
+ * Sable memory error frame - sable pfms section 3.42
+ */
+struct el_t2_data_memory {
+	struct	el_t2_frame_header elcm_hdr;	/* ID$MEM-FERR = 0x08 */
+	unsigned int  elcm_module;	/* Module id. */
+	unsigned int  elcm_res04;	/* Reserved. */
+	unsigned long elcm_merr;	/* CSR0: Error Reg 1. */
+	unsigned long elcm_mcmd1;	/* CSR1: Command Trap 1. */
+	unsigned long elcm_mcmd2;	/* CSR2: Command Trap 2. */
+	unsigned long elcm_mconf;	/* CSR3: Configuration. */
+	unsigned long elcm_medc1;	/* CSR4: EDC Status 1. */
+	unsigned long elcm_medc2;	/* CSR5: EDC Status 2. */
+	unsigned long elcm_medcc;	/* CSR6: EDC Control. */
+	unsigned long elcm_msctl;	/* CSR7: Stream Buffer Control. */
+	unsigned long elcm_mref;	/* CSR8: Refresh Control. */
+	unsigned long elcm_filter;	/* CSR9: CRD Filter Control. */
+};
+
+
+/*
+ * Sable other CPU error frame - sable pfms section 3.43
+ */
+struct el_t2_data_other_cpu {
+	short	      elco_cpuid;	/* CPU ID */
+	short	      elco_res02[3];
+	unsigned long elco_bcc;	/* CSR 0 */
+	unsigned long elco_bcce;	/* CSR 1 */
+	unsigned long elco_bccea;	/* CSR 2 */
+	unsigned long elco_bcue;	/* CSR 3 */
+	unsigned long elco_bcuea;	/* CSR 4 */
+	unsigned long elco_dter;	/* CSR 5 */
+	unsigned long elco_cbctl;	/* CSR 6 */
+	unsigned long elco_cbe;	/* CSR 7 */
+	unsigned long elco_cbeal;	/* CSR 8 */
+	unsigned long elco_cbeah;	/* CSR 9 */
+	unsigned long elco_pmbx;	/* CSR 10 */
+	unsigned long elco_ipir;	/* CSR 11 */
+	unsigned long elco_sic;	/* CSR 12 */
+	unsigned long elco_adlk;	/* CSR 13 */
+	unsigned long elco_madrl;	/* CSR 14 */
+	unsigned long elco_crrev4;	/* CSR 15 */
+};
+
+/*
+ * Sable other CPU error frame - sable pfms section 3.44
+ */
+struct el_t2_data_t2{
+	struct el_t2_frame_header elct_hdr;	/* ID$T2-FRAME */
+	unsigned long elct_iocsr;	/* IO Control and Status Register */
+	unsigned long elct_cerr1;	/* Cbus Error Register 1 */
+	unsigned long elct_cerr2;	/* Cbus Error Register 2 */
+	unsigned long elct_cerr3;	/* Cbus Error Register 3 */
+	unsigned long elct_perr1;	/* PCI Error Register 1 */
+	unsigned long elct_perr2;	/* PCI Error Register 2 */
+	unsigned long elct_hae0_1;	/* High Address Extension Register 1 */
+	unsigned long elct_hae0_2;	/* High Address Extension Register 2 */
+	unsigned long elct_hbase;	/* High Base Register */
+	unsigned long elct_wbase1;	/* Window Base Register 1 */
+	unsigned long elct_wmask1;	/* Window Mask Register 1 */
+	unsigned long elct_tbase1;	/* Translated Base Register 1 */
+	unsigned long elct_wbase2;	/* Window Base Register 2 */
+	unsigned long elct_wmask2;	/* Window Mask Register 2 */
+	unsigned long elct_tbase2;	/* Translated Base Register 2 */
+	unsigned long elct_tdr0;	/* TLB Data Register 0 */
+	unsigned long elct_tdr1;	/* TLB Data Register 1 */
+	unsigned long elct_tdr2;	/* TLB Data Register 2 */
+	unsigned long elct_tdr3;	/* TLB Data Register 3 */
+	unsigned long elct_tdr4;	/* TLB Data Register 4 */
+	unsigned long elct_tdr5;	/* TLB Data Register 5 */
+	unsigned long elct_tdr6;	/* TLB Data Register 6 */
+	unsigned long elct_tdr7;	/* TLB Data Register 7 */
+};
+
+/*
+ * Sable error log data structure - sable pfms section 3.40
+ */
+struct el_t2_data_corrected {
+	unsigned long elcpb_biu_stat;
+	unsigned long elcpb_biu_addr;
+	unsigned long elcpb_biu_ctl;
+	unsigned long elcpb_fill_syndrome;
+	unsigned long elcpb_fill_addr;
+	unsigned long elcpb_bc_tag;
+};
+
+/*
+ * Sable error log data structure
+ * Note there are 4 memory slots on sable (see t2.h)
+ */
+struct el_t2_frame_mcheck {
+	struct el_t2_frame_header elfmc_header;	/* ID$P-FRAME_MCHECK */
+	struct el_t2_logout_header elfmc_hdr;
+	struct el_t2_procdata_mcheck elfmc_procdata;
+	struct el_t2_sysdata_mcheck elfmc_sysdata;
+	struct el_t2_data_t2 elfmc_t2data;
+	struct el_t2_data_memory elfmc_memdata[4];
+	struct el_t2_frame_header elfmc_footer;	/* empty */
+};
+
+
+/*
+ * Sable error log data structures on memory errors
+ */
+struct el_t2_frame_corrected {
+	struct el_t2_frame_header elfcc_header;	/* ID$P-BC-COR */
+	struct el_t2_logout_header elfcc_hdr;
+	struct el_t2_data_corrected elfcc_procdata;
+/*	struct el_t2_data_t2 elfcc_t2data;		*/
+/*	struct el_t2_data_memory elfcc_memdata[4];	*/
+	struct el_t2_frame_header elfcc_footer;	/* empty */
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * T2 (the core logic PCI/memory support chipset for the SABLE
+ * series of processors uses a sparse address mapping scheme to
+ * get at PCI memory and I/O.
+ */
+
+#define vip	volatile int *
+#define vuip	volatile unsigned int *
+
+static inline u8 t2_inb(unsigned long addr)
+{
+	long result = *(vip) ((addr << 5) + T2_IO + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+static inline void t2_outb(u8 b, unsigned long addr)
+{
+	unsigned long w;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_IO + 0x00) = w;
+	mb();
+}
+
+static inline u16 t2_inw(unsigned long addr)
+{
+	long result = *(vip) ((addr << 5) + T2_IO + 0x08);
+	return __kernel_extwl(result, addr & 3);
+}
+
+static inline void t2_outw(u16 b, unsigned long addr)
+{
+	unsigned long w;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_IO + 0x08) = w;
+	mb();
+}
+
+static inline u32 t2_inl(unsigned long addr)
+{
+	return *(vuip) ((addr << 5) + T2_IO + 0x18);
+}
+
+static inline void t2_outl(u32 b, unsigned long addr)
+{
+	*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
+
+/*
+ * Memory functions.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define t2_set_hae { \
+	msb = addr  >> 27; \
+	addr &= T2_MEM_R1_MASK; \
+	set_hae(msb); \
+}
+
+static spinlock_t t2_hae_lock = SPIN_LOCK_UNLOCKED;
+
+__EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return __kernel_extwl(result, addr & 3);
+}
+
+/*
+ * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
+ * because we cannot access all of DENSE without changing its HAE.
+ */
+__EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return result & 0xffffffffUL;
+}
+
+__EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long r0, r1, work, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
+	r0 = *(vuip)(work);
+	r1 = *(vuip)(work + (4 << 5));
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return r1 << 32 | r0;
+}
+
+__EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long msb, w;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long msb, w;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+/*
+ * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
+ * because we cannot access all of DENSE without changing its HAE.
+ */
+__EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long msb, work;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
+	*(vuip)work = b;
+	*(vuip)(work + (4 << 5)) = b >> 32;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + T2_IO);
+}
+
+__EXTERN_INLINE void __iomem *t2_ioremap(unsigned long addr, 
+					 unsigned long size)
+{
+	return (void __iomem *)(addr + T2_DENSE_MEM);
+}
+
+__EXTERN_INLINE int t2_is_ioaddr(unsigned long addr)
+{
+	return (long)addr >= 0;
+}
+
+__EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= T2_DENSE_MEM;
+}
+
+/* New-style ioread interface.  The mmio routines are so ugly for T2 that
+   it doesn't make sense to merge the pio and mmio routines.  */
+
+#define IOPORT(OS, NS)							\
+__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr)		\
+{									\
+	if (t2_is_mmio(xaddr))						\
+		return t2_read##OS(xaddr - T2_DENSE_MEM);		\
+	else								\
+		return t2_in##OS((unsigned long)xaddr - T2_IO);		\
+}									\
+__EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
+{									\
+	if (t2_is_mmio(xaddr))						\
+		t2_write##OS(b, xaddr - T2_DENSE_MEM);			\
+	else								\
+		t2_out##OS(b, (unsigned long)xaddr - T2_IO);		\
+}
+
+IOPORT(b, 8)
+IOPORT(w, 16)
+IOPORT(l, 32)
+
+#undef IOPORT
+
+#undef vip
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		t2
+#define t2_trivial_rw_bw	0
+#define t2_trivial_rw_lq	0
+#define t2_trivial_io_bw	0
+#define t2_trivial_io_lq	0
+#define t2_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_T2__H__ */
diff --git a/include/asm-alpha/core_titan.h b/include/asm-alpha/core_titan.h
new file mode 100644
index 000000000000..a64ccbff7d98
--- /dev/null
+++ b/include/asm-alpha/core_titan.h
@@ -0,0 +1,415 @@
+#ifndef __ALPHA_TITAN__H__
+#define __ALPHA_TITAN__H__
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/compiler.h>
+
+/*
+ * TITAN is the internal names for a core logic chipset which provides
+ * memory controller and PCI/AGP access for 21264 based systems.
+ *
+ * This file is based on:
+ *
+ * Titan Chipset Engineering Specification
+ * Revision 0.12
+ * 13 July 1999
+ *
+ */
+
+/* XXX: Do we need to conditionalize on this?  */
+#ifdef USE_48_BIT_KSEG
+#define TI_BIAS 0x80000000000UL
+#else
+#define TI_BIAS 0x10000000000UL
+#endif
+
+/*
+ * CChip, DChip, and PChip registers
+ */
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} titan_64;
+
+typedef struct {
+	titan_64	csc;
+	titan_64	mtr;
+	titan_64	misc;
+	titan_64	mpd;
+	titan_64	aar0;
+	titan_64	aar1;
+	titan_64	aar2;
+	titan_64	aar3;
+	titan_64	dim0;
+	titan_64	dim1;
+	titan_64	dir0;
+	titan_64	dir1;
+	titan_64	drir;
+	titan_64	prben;
+	titan_64	iic0;
+	titan_64	iic1;
+	titan_64	mpr0;
+	titan_64	mpr1;
+	titan_64	mpr2;
+	titan_64	mpr3;
+	titan_64	rsvd[2];
+	titan_64	ttr;
+	titan_64	tdr;
+	titan_64	dim2;
+	titan_64	dim3;
+	titan_64	dir2;
+	titan_64	dir3;
+	titan_64	iic2;
+	titan_64	iic3;
+	titan_64	pwr;
+	titan_64	reserved[17];
+	titan_64	cmonctla;
+	titan_64	cmonctlb;
+	titan_64	cmoncnt01;
+	titan_64	cmoncnt23;
+	titan_64	cpen;
+} titan_cchip;
+
+typedef struct {
+	titan_64	dsc;
+	titan_64	str;
+	titan_64	drev;
+	titan_64	dsc2;
+} titan_dchip;
+
+typedef struct {
+	titan_64	wsba[4];
+	titan_64	wsm[4];
+	titan_64	tba[4];
+	titan_64	pctl;
+	titan_64	plat;
+	titan_64	reserved0[2];
+	union {
+		struct {
+			titan_64	serror;
+			titan_64	serren;
+			titan_64	serrset;
+			titan_64	reserved0;
+			titan_64	gperror;
+			titan_64	gperren;
+			titan_64	gperrset;
+			titan_64	reserved1;
+			titan_64	gtlbiv;
+			titan_64	gtlbia;
+			titan_64	reserved2[2];
+			titan_64	sctl;
+			titan_64	reserved3[3];
+		} g;
+		struct {
+			titan_64	agperror;
+			titan_64	agperren;
+			titan_64	agperrset;
+			titan_64	agplastwr;
+			titan_64	aperror;
+			titan_64	aperren;
+			titan_64	aperrset;
+			titan_64	reserved0;
+			titan_64	atlbiv;
+			titan_64	atlbia;
+			titan_64	reserved1[6];
+		} a;
+	} port_specific;
+	titan_64	sprst;
+	titan_64	reserved1[31];
+} titan_pachip_port;
+
+typedef struct {
+	titan_pachip_port	g_port;
+	titan_pachip_port	a_port;
+} titan_pachip;
+
+#define TITAN_cchip	((titan_cchip  *)(IDENT_ADDR+TI_BIAS+0x1A0000000UL))
+#define TITAN_dchip    	((titan_dchip  *)(IDENT_ADDR+TI_BIAS+0x1B0000800UL))
+#define TITAN_pachip0 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x180000000UL))
+#define TITAN_pachip1 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x380000000UL))
+extern unsigned TITAN_agp;
+extern int TITAN_bootcpu;
+
+/*
+ * TITAN PA-chip Window Space Base Address register.
+ * (WSBA[0-2])
+ */
+#define wsba_m_ena 0x1                
+#define wsba_m_sg 0x2
+#define wsba_m_addr 0xFFF00000  
+#define wmask_k_sz1gb 0x3FF00000                   
+union TPAchipWSBA {
+	struct  {
+		unsigned wsba_v_ena : 1;
+		unsigned wsba_v_sg : 1;
+		unsigned wsba_v_rsvd1 : 18;
+		unsigned wsba_v_addr : 12;
+		unsigned wsba_v_rsvd2 : 32;
+        } wsba_r_bits;
+	int wsba_q_whole [2];
+};
+
+/*
+ * TITAN PA-chip Control Register
+ * This definition covers both the G-Port GPCTL and the A-PORT APCTL.
+ * Bits <51:0> are the same in both cases. APCTL<63:52> are only 
+ * applicable to AGP.
+ */
+#define pctl_m_fbtb 			0x00000001
+#define pctl_m_thdis 			0x00000002
+#define pctl_m_chaindis 		0x00000004
+#define pctl_m_tgtlat 			0x00000018
+#define pctl_m_hole  	  		0x00000020
+#define pctl_m_mwin 	  		0x00000040
+#define pctl_m_arbena 	  		0x00000080
+#define pctl_m_prigrp 	  		0x0000FF00
+#define pctl_m_ppri 	  		0x00010000
+#define pctl_m_pcispd66  		0x00020000
+#define pctl_m_cngstlt	  		0x003C0000
+#define pctl_m_ptpdesten 		0x3FC00000
+#define pctl_m_dpcen			0x40000000
+#define pctl_m_apcen		0x0000000080000000UL
+#define pctl_m_dcrtv		0x0000000300000000UL
+#define pctl_m_en_stepping	0x0000000400000000UL
+#define apctl_m_rsvd1		0x000FFFF800000000UL
+#define apctl_m_agp_rate	0x0030000000000000UL
+#define apctl_m_agp_sba_en	0x0040000000000000UL
+#define apctl_m_agp_en		0x0080000000000000UL
+#define apctl_m_rsvd2		0x0100000000000000UL
+#define apctl_m_agp_present	0x0200000000000000UL
+#define apctl_agp_hp_rd		0x1C00000000000000UL
+#define apctl_agp_lp_rd		0xE000000000000000UL
+#define gpctl_m_rsvd		0xFFFFFFF800000000UL
+union TPAchipPCTL {
+	struct {
+		unsigned pctl_v_fbtb : 1;		/* A/G [0]     */
+		unsigned pctl_v_thdis : 1;		/* A/G [1]     */
+		unsigned pctl_v_chaindis : 1;		/* A/G [2]     */
+		unsigned pctl_v_tgtlat : 2;		/* A/G [4:3]   */
+		unsigned pctl_v_hole : 1;		/* A/G [5]     */
+		unsigned pctl_v_mwin : 1;		/* A/G [6]     */
+		unsigned pctl_v_arbena : 1;		/* A/G [7]     */
+		unsigned pctl_v_prigrp : 8;		/* A/G [15:8]  */
+		unsigned pctl_v_ppri : 1;		/* A/G [16]    */
+		unsigned pctl_v_pcispd66 : 1;		/* A/G [17]    */
+		unsigned pctl_v_cngstlt : 4;		/* A/G [21:18] */
+		unsigned pctl_v_ptpdesten : 8;		/* A/G [29:22] */
+		unsigned pctl_v_dpcen : 1;		/* A/G [30]    */
+		unsigned pctl_v_apcen : 1;		/* A/G [31]    */
+		unsigned pctl_v_dcrtv : 2;		/* A/G [33:32] */
+		unsigned pctl_v_en_stepping :1;		/* A/G [34]    */
+		unsigned apctl_v_rsvd1 : 17;		/* A   [51:35] */
+		unsigned apctl_v_agp_rate : 2;		/* A   [53:52] */
+		unsigned apctl_v_agp_sba_en : 1;	/* A   [54]    */
+		unsigned apctl_v_agp_en : 1;		/* A   [55]    */
+		unsigned apctl_v_rsvd2 : 1;		/* A   [56]    */
+		unsigned apctl_v_agp_present : 1;	/* A   [57]    */
+		unsigned apctl_v_agp_hp_rd : 3;		/* A   [60:58] */
+		unsigned apctl_v_agp_lp_rd : 3;		/* A   [63:61] */
+	} pctl_r_bits;
+	unsigned int pctl_l_whole [2];
+	unsigned long pctl_q_whole;
+};
+
+/*
+ * SERROR / SERREN / SERRSET
+ */
+union TPAchipSERR {
+	struct {
+		unsigned serr_v_lost_uecc : 1;		/* [0]		*/
+		unsigned serr_v_uecc : 1;		/* [1]  	*/
+		unsigned serr_v_cre : 1;		/* [2]		*/
+		unsigned serr_v_nxio : 1;		/* [3]		*/
+		unsigned serr_v_lost_cre : 1;		/* [4]		*/
+		unsigned serr_v_rsvd0 : 10;		/* [14:5]	*/
+		unsigned serr_v_addr : 32;		/* [46:15]	*/
+		unsigned serr_v_rsvd1 : 5;		/* [51:47]	*/
+		unsigned serr_v_source : 2;		/* [53:52]	*/
+		unsigned serr_v_cmd : 2;		/* [55:54]	*/
+		unsigned serr_v_syn : 8;		/* [63:56]	*/
+	} serr_r_bits;
+	unsigned int serr_l_whole[2];
+	unsigned long serr_q_whole;
+};
+
+/*
+ * GPERROR / APERROR / GPERREN / APERREN / GPERRSET / APERRSET
+ */
+union TPAchipPERR {
+	struct {
+		unsigned long perr_v_lost : 1;	     	/* [0]		*/
+		unsigned long perr_v_serr : 1;		/* [1]		*/
+		unsigned long perr_v_perr : 1;		/* [2]		*/
+		unsigned long perr_v_dcrto : 1;		/* [3]		*/
+		unsigned long perr_v_sge : 1;		/* [4]		*/
+		unsigned long perr_v_ape : 1;		/* [5]		*/
+		unsigned long perr_v_ta : 1;		/* [6]		*/
+		unsigned long perr_v_dpe : 1;		/* [7]		*/
+		unsigned long perr_v_nds : 1;		/* [8]		*/
+		unsigned long perr_v_iptpr : 1;		/* [9]		*/
+		unsigned long perr_v_iptpw : 1;		/* [10] 	*/
+		unsigned long perr_v_rsvd0 : 3;		/* [13:11]	*/
+		unsigned long perr_v_addr : 33;		/* [46:14]	*/
+		unsigned long perr_v_dac : 1;		/* [47]		*/
+		unsigned long perr_v_mwin : 1;		/* [48]		*/
+		unsigned long perr_v_rsvd1 : 3;		/* [51:49]	*/
+		unsigned long perr_v_cmd : 4;		/* [55:52]	*/
+		unsigned long perr_v_rsvd2 : 8;		/* [63:56]	*/
+	} perr_r_bits;
+	unsigned int perr_l_whole[2];
+	unsigned long perr_q_whole;
+};
+
+/*
+ * AGPERROR / AGPERREN / AGPERRSET
+ */
+union TPAchipAGPERR {
+	struct {
+		unsigned agperr_v_lost : 1;		/* [0]		*/
+		unsigned agperr_v_lpqfull : 1;		/* [1]		*/
+		unsigned apgerr_v_hpqfull : 1;		/* [2]		*/
+		unsigned agperr_v_rescmd : 1;		/* [3]		*/
+		unsigned agperr_v_ipte : 1;		/* [4]		*/
+		unsigned agperr_v_ptp :	1;      	/* [5]		*/
+		unsigned agperr_v_nowindow : 1;		/* [6]		*/
+		unsigned agperr_v_rsvd0 : 8;		/* [14:7]	*/
+		unsigned agperr_v_addr : 32;		/* [46:15]	*/
+		unsigned agperr_v_rsvd1 : 1;		/* [47]		*/
+		unsigned agperr_v_dac : 1;		/* [48]		*/
+		unsigned agperr_v_mwin : 1;		/* [49]		*/
+		unsigned agperr_v_cmd : 3;		/* [52:50]	*/
+		unsigned agperr_v_length : 6;		/* [58:53]	*/
+		unsigned agperr_v_fence : 1;		/* [59]		*/
+		unsigned agperr_v_rsvd2 : 4;		/* [63:60]	*/
+	} agperr_r_bits;
+	unsigned int agperr_l_whole[2];
+	unsigned long agperr_q_whole;
+};
+/*
+ * Memory spaces:
+ * Hose numbers are assigned as follows:
+ *		0 - pachip 0 / G Port
+ *		1 - pachip 1 / G Port
+ * 		2 - pachip 0 / A Port
+ *      	3 - pachip 1 / A Port
+ */
+#define TITAN_HOSE_SHIFT       (33) 
+#define TITAN_HOSE(h)		(((unsigned long)(h)) << TITAN_HOSE_SHIFT)
+#define TITAN_BASE		(IDENT_ADDR + TI_BIAS)
+#define TITAN_MEM(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x000000000UL)
+#define _TITAN_IACK_SC(h)    	(TITAN_BASE+TITAN_HOSE(h)+0x1F8000000UL)
+#define TITAN_IO(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FC000000UL)
+#define TITAN_CONF(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FE000000UL)
+
+#define TITAN_HOSE_MASK		TITAN_HOSE(3)
+#define TITAN_IACK_SC	     	_TITAN_IACK_SC(0) /* hack! */
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define TITAN_IO_BIAS		TITAN_IO(0)
+#define TITAN_MEM_BIAS		TITAN_MEM(0)
+
+/* The IO address space is larger than 0xffff */
+#define TITAN_IO_SPACE		(TITAN_CONF(0) - TITAN_IO(0))
+
+/* TIG Space */
+#define TITAN_TIG_SPACE		(TITAN_BASE + 0x100000000UL)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+/* ??? Just a guess.  Ought to confirm it hasn't been moved.  */
+#define TITAN_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling TITAN machine checks:
+ */
+#define SCB_Q_SYSERR	0x620
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+#define SCB_Q_SYSEVENT	0x680	/* environmental / system management */
+struct el_TITAN_sysdata_mcheck {
+	u64 summary;	/* 0x00 */
+	u64 c_dirx;	/* 0x08 */
+	u64 c_misc;	/* 0x10 */
+	u64 p0_serror;	/* 0x18 */
+	u64 p0_gperror; /* 0x20 */
+	u64 p0_aperror; /* 0x28 */
+	u64 p0_agperror;/* 0x30 */
+	u64 p1_serror;	/* 0x38 */
+	u64 p1_gperror; /* 0x40 */
+	u64 p1_aperror; /* 0x48 */
+	u64 p1_agperror;/* 0x50 */
+};
+
+/*
+ * System area for a privateer 680 environmental/system management mcheck 
+ */
+struct el_PRIVATEER_envdata_mcheck {
+	u64 summary;	/* 0x00 */
+	u64 c_dirx;	/* 0x08 */
+	u64 smir;	/* 0x10 */
+	u64 cpuir;	/* 0x18 */
+	u64 psir;	/* 0x20 */
+	u64 fault;	/* 0x28 */
+	u64 sys_doors;	/* 0x30 */
+	u64 temp_warn;	/* 0x38 */
+	u64 fan_ctrl;	/* 0x40 */
+	u64 code;	/* 0x48 */
+	u64 reserved;	/* 0x50 */
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * TITAN, a 21??? PCI/memory support chipset for the EV6 (21264)
+ * can only use linear accesses to get at PCI/AGP memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *titan_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + TITAN_IO_BIAS);
+}
+
+extern void __iomem *titan_ioremap(unsigned long addr, unsigned long size);
+extern void titan_iounmap(volatile void __iomem *addr);
+
+__EXTERN_INLINE int titan_is_ioaddr(unsigned long addr)
+{
+	return addr >= TITAN_BASE;
+}
+
+extern int titan_is_mmio(const volatile void __iomem *addr);
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		titan
+#define titan_trivial_rw_bw	1
+#define titan_trivial_rw_lq	1
+#define titan_trivial_io_bw	1
+#define titan_trivial_io_lq	1
+#define titan_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_TITAN__H__ */
diff --git a/include/asm-alpha/core_tsunami.h b/include/asm-alpha/core_tsunami.h
new file mode 100644
index 000000000000..44e635d2c571
--- /dev/null
+++ b/include/asm-alpha/core_tsunami.h
@@ -0,0 +1,344 @@
+#ifndef __ALPHA_TSUNAMI__H__
+#define __ALPHA_TSUNAMI__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * TSUNAMI/TYPHOON are the internal names for the core logic chipset which
+ * provides memory controller and PCI access for the 21264 based systems.
+ *
+ * This file is based on:
+ *
+ * Tsunami System Programmers Manual
+ * Preliminary, Chapters 2-5
+ *
+ */
+
+/* XXX: Do we need to conditionalize on this?  */
+#ifdef USE_48_BIT_KSEG
+#define TS_BIAS 0x80000000000UL
+#else
+#define TS_BIAS 0x10000000000UL
+#endif
+
+/*
+ * CChip, DChip, and PChip registers
+ */
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} tsunami_64;
+
+typedef struct {
+	tsunami_64	csc;
+	tsunami_64	mtr;
+	tsunami_64	misc;
+	tsunami_64	mpd;
+	tsunami_64	aar0;
+	tsunami_64	aar1;
+	tsunami_64	aar2;
+	tsunami_64	aar3;
+	tsunami_64	dim0;
+	tsunami_64	dim1;
+	tsunami_64	dir0;
+	tsunami_64	dir1;
+	tsunami_64	drir;
+	tsunami_64	prben;
+	tsunami_64	iic;	/* a.k.a. iic0 */
+	tsunami_64	wdr;	/* a.k.a. iic1 */
+	tsunami_64	mpr0;
+	tsunami_64	mpr1;
+	tsunami_64	mpr2;
+	tsunami_64	mpr3;
+	tsunami_64	mctl;
+	tsunami_64	__pad1;
+	tsunami_64	ttr;
+	tsunami_64	tdr;
+	tsunami_64	dim2;
+	tsunami_64	dim3;
+	tsunami_64	dir2;
+	tsunami_64	dir3;
+	tsunami_64	iic2;
+	tsunami_64	iic3;
+} tsunami_cchip;
+
+typedef struct {
+	tsunami_64	dsc;
+	tsunami_64	str;
+	tsunami_64	drev;
+} tsunami_dchip;
+
+typedef struct {
+	tsunami_64	wsba[4];
+	tsunami_64	wsm[4];
+	tsunami_64	tba[4];
+	tsunami_64	pctl;
+	tsunami_64	plat;
+	tsunami_64	reserved;
+	tsunami_64	perror;
+	tsunami_64	perrmask;
+	tsunami_64	perrset;
+	tsunami_64	tlbiv;
+	tsunami_64	tlbia;
+	tsunami_64	pmonctl;
+	tsunami_64	pmoncnt;
+} tsunami_pchip;
+
+#define TSUNAMI_cchip  ((tsunami_cchip *)(IDENT_ADDR+TS_BIAS+0x1A0000000UL))
+#define TSUNAMI_dchip  ((tsunami_dchip *)(IDENT_ADDR+TS_BIAS+0x1B0000800UL))
+#define TSUNAMI_pchip0 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x180000000UL))
+#define TSUNAMI_pchip1 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x380000000UL))
+extern int TSUNAMI_bootcpu;
+
+/*
+ * TSUNAMI Pchip Error register.
+ */
+
+#define perror_m_lost 0x1
+#define perror_m_serr 0x2
+#define perror_m_perr 0x4
+#define perror_m_dcrto 0x8
+#define perror_m_sge 0x10
+#define perror_m_ape 0x20
+#define perror_m_ta 0x40
+#define perror_m_rdpe 0x80
+#define perror_m_nds 0x100
+#define perror_m_rto 0x200
+#define perror_m_uecc 0x400
+#define perror_m_cre 0x800
+#define perror_m_addrl 0xFFFFFFFF0000UL
+#define perror_m_addrh 0x7000000000000UL
+#define perror_m_cmd 0xF0000000000000UL
+#define perror_m_syn 0xFF00000000000000UL
+union TPchipPERROR {   
+	struct  {
+		unsigned int perror_v_lost : 1;
+		unsigned perror_v_serr : 1;
+		unsigned perror_v_perr : 1;
+		unsigned perror_v_dcrto : 1;
+		unsigned perror_v_sge : 1;
+		unsigned perror_v_ape : 1;
+		unsigned perror_v_ta : 1;
+		unsigned perror_v_rdpe : 1;
+		unsigned perror_v_nds : 1;
+		unsigned perror_v_rto : 1;
+		unsigned perror_v_uecc : 1;
+		unsigned perror_v_cre : 1;                 
+		unsigned perror_v_rsvd1 : 4;
+		unsigned perror_v_addrl : 32;
+		unsigned perror_v_addrh : 3;
+		unsigned perror_v_rsvd2 : 1;
+		unsigned perror_v_cmd : 4;
+		unsigned perror_v_syn : 8;
+	} perror_r_bits;
+	int perror_q_whole [2];
+};                       
+
+/*
+ * TSUNAMI Pchip Window Space Base Address register.
+ */
+#define wsba_m_ena 0x1                
+#define wsba_m_sg 0x2
+#define wsba_m_ptp 0x4
+#define wsba_m_addr 0xFFF00000  
+#define wmask_k_sz1gb 0x3FF00000                   
+union TPchipWSBA {
+	struct  {
+		unsigned wsba_v_ena : 1;
+		unsigned wsba_v_sg : 1;
+		unsigned wsba_v_ptp : 1;
+		unsigned wsba_v_rsvd1 : 17;
+		unsigned wsba_v_addr : 12;
+		unsigned wsba_v_rsvd2 : 32;
+	} wsba_r_bits;
+	int wsba_q_whole [2];
+};
+
+/*
+ * TSUNAMI Pchip Control Register
+ */
+#define pctl_m_fdsc 0x1
+#define pctl_m_fbtb 0x2
+#define pctl_m_thdis 0x4
+#define pctl_m_chaindis 0x8
+#define pctl_m_tgtlat 0x10
+#define pctl_m_hole 0x20
+#define pctl_m_mwin 0x40
+#define pctl_m_arbena 0x80
+#define pctl_m_prigrp 0x7F00
+#define pctl_m_ppri 0x8000
+#define pctl_m_rsvd1 0x30000
+#define pctl_m_eccen 0x40000
+#define pctl_m_padm 0x80000
+#define pctl_m_cdqmax 0xF00000
+#define pctl_m_rev 0xFF000000
+#define pctl_m_crqmax 0xF00000000UL
+#define pctl_m_ptpmax 0xF000000000UL
+#define pctl_m_pclkx 0x30000000000UL
+#define pctl_m_fdsdis 0x40000000000UL
+#define pctl_m_fdwdis 0x80000000000UL
+#define pctl_m_ptevrfy 0x100000000000UL
+#define pctl_m_rpp 0x200000000000UL
+#define pctl_m_pid 0xC00000000000UL
+#define pctl_m_rsvd2 0xFFFF000000000000UL
+
+union TPchipPCTL {
+	struct {
+		unsigned pctl_v_fdsc : 1;
+		unsigned pctl_v_fbtb : 1;
+		unsigned pctl_v_thdis : 1;
+		unsigned pctl_v_chaindis : 1;
+		unsigned pctl_v_tgtlat : 1;
+		unsigned pctl_v_hole : 1;
+		unsigned pctl_v_mwin : 1;
+		unsigned pctl_v_arbena : 1;
+		unsigned pctl_v_prigrp : 7;
+		unsigned pctl_v_ppri : 1;
+		unsigned pctl_v_rsvd1 : 2;
+		unsigned pctl_v_eccen : 1;
+		unsigned pctl_v_padm : 1;
+		unsigned pctl_v_cdqmax : 4;
+		unsigned pctl_v_rev : 8;
+		unsigned pctl_v_crqmax : 4;
+		unsigned pctl_v_ptpmax : 4;
+		unsigned pctl_v_pclkx : 2;
+		unsigned pctl_v_fdsdis : 1;
+		unsigned pctl_v_fdwdis : 1;
+		unsigned pctl_v_ptevrfy : 1;
+		unsigned pctl_v_rpp : 1;
+		unsigned pctl_v_pid : 2;
+		unsigned pctl_v_rsvd2 : 16;
+	} pctl_r_bits;
+	int pctl_q_whole [2];
+};
+
+/*
+ * TSUNAMI Pchip Error Mask Register.
+ */
+#define perrmask_m_lost 0x1
+#define perrmask_m_serr 0x2
+#define perrmask_m_perr 0x4
+#define perrmask_m_dcrto 0x8
+#define perrmask_m_sge 0x10
+#define perrmask_m_ape 0x20
+#define perrmask_m_ta 0x40
+#define perrmask_m_rdpe 0x80
+#define perrmask_m_nds 0x100
+#define perrmask_m_rto 0x200
+#define perrmask_m_uecc 0x400
+#define perrmask_m_cre 0x800
+#define perrmask_m_rsvd 0xFFFFFFFFFFFFF000UL
+union TPchipPERRMASK {   
+	struct  {
+		unsigned int perrmask_v_lost : 1;
+		unsigned perrmask_v_serr : 1;
+		unsigned perrmask_v_perr : 1;
+		unsigned perrmask_v_dcrto : 1;
+		unsigned perrmask_v_sge : 1;
+		unsigned perrmask_v_ape : 1;
+		unsigned perrmask_v_ta : 1;
+		unsigned perrmask_v_rdpe : 1;
+		unsigned perrmask_v_nds : 1;
+		unsigned perrmask_v_rto : 1;
+		unsigned perrmask_v_uecc : 1;
+		unsigned perrmask_v_cre : 1;                 
+		unsigned perrmask_v_rsvd1 : 20;
+		unsigned perrmask_v_rsvd2 : 32;
+	} perrmask_r_bits;
+	int perrmask_q_whole [2];
+};                       
+
+/*
+ * Memory spaces:
+ */
+#define TSUNAMI_HOSE(h)		(((unsigned long)(h)) << 33)
+#define TSUNAMI_BASE		(IDENT_ADDR + TS_BIAS)
+
+#define TSUNAMI_MEM(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x000000000UL)
+#define _TSUNAMI_IACK_SC(h)	(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1F8000000UL)
+#define TSUNAMI_IO(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FC000000UL)
+#define TSUNAMI_CONF(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FE000000UL)
+
+#define TSUNAMI_IACK_SC		_TSUNAMI_IACK_SC(0) /* hack! */
+
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define TSUNAMI_IO_BIAS          TSUNAMI_IO(0)
+#define TSUNAMI_MEM_BIAS         TSUNAMI_MEM(0)
+
+/* The IO address space is larger than 0xffff */
+#define TSUNAMI_IO_SPACE	(TSUNAMI_CONF(0) - TSUNAMI_IO(0))
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define TSUNAMI_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling TSUNAMI machine checks:
+ */
+struct el_TSUNAMI_sysdata_mcheck {
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * TSUNAMI, the 21??? PCI/memory support chipset for the EV6 (21264)
+ * can only use linear accesses to get at PCI memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *tsunami_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + TSUNAMI_IO_BIAS);
+}
+
+__EXTERN_INLINE void __iomem *tsunami_ioremap(unsigned long addr, 
+					      unsigned long size)
+{
+	return (void __iomem *)(addr + TSUNAMI_MEM_BIAS);
+}
+
+__EXTERN_INLINE int tsunami_is_ioaddr(unsigned long addr)
+{
+	return addr >= TSUNAMI_BASE;
+}
+
+__EXTERN_INLINE int tsunami_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	return (addr & 0x100000000UL) == 0;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		tsunami
+#define tsunami_trivial_rw_bw	1
+#define tsunami_trivial_rw_lq	1
+#define tsunami_trivial_io_bw	1
+#define tsunami_trivial_io_lq	1
+#define tsunami_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_TSUNAMI__H__ */
diff --git a/include/asm-alpha/core_wildfire.h b/include/asm-alpha/core_wildfire.h
new file mode 100644
index 000000000000..12af803d445a
--- /dev/null
+++ b/include/asm-alpha/core_wildfire.h
@@ -0,0 +1,318 @@
+#ifndef __ALPHA_WILDFIRE__H__
+#define __ALPHA_WILDFIRE__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+#define WILDFIRE_MAX_QBB	8	/* more than 8 requires other mods */
+#define WILDFIRE_PCA_PER_QBB	4
+#define WILDFIRE_IRQ_PER_PCA	64
+
+#define WILDFIRE_NR_IRQS \
+  (WILDFIRE_MAX_QBB * WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
+
+extern unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
+extern unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
+#define QBB_MAP_EMPTY	0xff
+
+extern unsigned long wildfire_hard_qbb_mask;
+extern unsigned long wildfire_soft_qbb_mask;
+extern unsigned long wildfire_gp_mask;
+extern unsigned long wildfire_hs_mask;
+extern unsigned long wildfire_iop_mask;
+extern unsigned long wildfire_ior_mask;
+extern unsigned long wildfire_pca_mask;
+extern unsigned long wildfire_cpu_mask;
+extern unsigned long wildfire_mem_mask;
+
+#define WILDFIRE_QBB_EXISTS(qbbno) (wildfire_soft_qbb_mask & (1 << (qbbno)))
+
+#define WILDFIRE_MEM_EXISTS(qbbno) (wildfire_mem_mask & (0xf << ((qbbno) << 2)))
+
+#define WILDFIRE_PCA_EXISTS(qbbno, pcano) \
+		(wildfire_pca_mask & (1 << (((qbbno) << 2) + (pcano))))
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} wildfire_64;
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(256)));
+} wildfire_256;
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(2048)));
+} wildfire_2k;
+
+typedef struct {
+	wildfire_64	qsd_whami;
+	wildfire_64	qsd_rev;
+	wildfire_64	qsd_port_present;
+	wildfire_64	qsd_port_active;
+	wildfire_64	qsd_fault_ena;
+	wildfire_64	qsd_cpu_int_ena;
+	wildfire_64	qsd_mem_config;
+	wildfire_64	qsd_err_sum;
+	wildfire_64	ce_sum[4];
+	wildfire_64	dev_init[4];
+	wildfire_64	it_int[4];
+	wildfire_64	ip_int[4];
+	wildfire_64	uce_sum[4];
+	wildfire_64	se_sum__non_dev_int[4];
+	wildfire_64	scratch[4];
+	wildfire_64	qsd_timer;
+	wildfire_64	qsd_diag;
+} wildfire_qsd;
+
+typedef struct {
+	wildfire_256	qsd_whami;
+	wildfire_256	__pad1;
+	wildfire_256	ce_sum;
+	wildfire_256	dev_init;
+	wildfire_256	it_int;
+	wildfire_256	ip_int;
+	wildfire_256	uce_sum;
+	wildfire_256	se_sum;
+} wildfire_fast_qsd;
+
+typedef struct {
+	wildfire_2k	qsa_qbb_id;
+	wildfire_2k	__pad1;
+	wildfire_2k	qsa_port_ena;
+	wildfire_2k	qsa_scratch;
+	wildfire_2k	qsa_config[5];
+	wildfire_2k	qsa_ref_int;
+	wildfire_2k	qsa_qbb_pop[2];
+	wildfire_2k	qsa_dtag_fc;
+	wildfire_2k	__pad2[3];
+	wildfire_2k	qsa_diag;
+	wildfire_2k	qsa_diag_lock[4];
+	wildfire_2k	__pad3[11];
+	wildfire_2k	qsa_cpu_err_sum;
+	wildfire_2k	qsa_misc_err_sum;
+	wildfire_2k	qsa_tmo_err_sum;
+	wildfire_2k	qsa_err_ena;
+	wildfire_2k	qsa_tmo_config;
+	wildfire_2k	qsa_ill_cmd_err_sum;
+	wildfire_2k	__pad4[26];
+	wildfire_2k	qsa_busy_mask;
+	wildfire_2k	qsa_arr_valid;
+	wildfire_2k	__pad5[2];
+	wildfire_2k	qsa_port_map[4];
+	wildfire_2k	qsa_arr_addr[8];
+	wildfire_2k	qsa_arr_mask[8];
+} wildfire_qsa;
+
+typedef struct {
+	wildfire_64	ioa_config;
+	wildfire_64	iod_config;
+	wildfire_64	iop_switch_credits;
+	wildfire_64	__pad1;
+	wildfire_64	iop_hose_credits;
+	wildfire_64	__pad2[11];
+	struct {
+		wildfire_64	__pad3;
+		wildfire_64	init;
+	} iop_hose[4];
+	wildfire_64	ioa_hose_0_ctrl;
+	wildfire_64	iod_hose_0_ctrl;
+	wildfire_64	ioa_hose_1_ctrl;
+	wildfire_64	iod_hose_1_ctrl;
+	wildfire_64	ioa_hose_2_ctrl;
+	wildfire_64	iod_hose_2_ctrl;
+	wildfire_64	ioa_hose_3_ctrl;
+	wildfire_64	iod_hose_3_ctrl;
+	struct {
+		wildfire_64	target;
+		wildfire_64	__pad4;
+	} iop_dev_int[4];
+
+	wildfire_64	iop_err_int_target;
+	wildfire_64	__pad5[7];
+	wildfire_64	iop_qbb_err_sum;
+	wildfire_64	__pad6;
+	wildfire_64	iop_qbb_se_sum;
+	wildfire_64	__pad7;
+	wildfire_64	ioa_err_sum;
+	wildfire_64	iod_err_sum;
+	wildfire_64	__pad8[4];
+	wildfire_64	ioa_diag_force_err;
+	wildfire_64	iod_diag_force_err;
+	wildfire_64	__pad9[4];
+	wildfire_64	iop_diag_send_err_int;
+	wildfire_64	__pad10[15];
+	wildfire_64	ioa_scratch;
+	wildfire_64	iod_scratch;
+} wildfire_iop;
+
+typedef struct {
+	wildfire_2k	gpa_qbb_map[4];
+	wildfire_2k	gpa_mem_pop_map;
+	wildfire_2k	gpa_scratch;
+	wildfire_2k	gpa_diag;
+	wildfire_2k	gpa_config_0;
+	wildfire_2k	__pad1;
+	wildfire_2k	gpa_init_id;
+	wildfire_2k	gpa_config_2;
+	/* not complete */
+} wildfire_gp;
+
+typedef struct {
+	wildfire_64	pca_what_am_i;
+	wildfire_64	pca_err_sum;
+	wildfire_64	pca_diag_force_err;
+	wildfire_64	pca_diag_send_err_int;
+	wildfire_64	pca_hose_credits;
+	wildfire_64	pca_scratch;
+	wildfire_64	pca_micro_addr;
+	wildfire_64	pca_micro_data;
+	wildfire_64	pca_pend_int;
+	wildfire_64	pca_sent_int;
+	wildfire_64	__pad1;
+	wildfire_64	pca_stdio_edge_level;
+	wildfire_64	__pad2[52];
+	struct {
+		wildfire_64	target;
+		wildfire_64	enable;
+	} pca_int[4];
+	wildfire_64	__pad3[56];
+	wildfire_64	pca_alt_sent_int[32];
+} wildfire_pca;
+
+typedef struct {
+	wildfire_64	ne_what_am_i;
+	/* not complete */
+} wildfire_ne;
+
+typedef struct {
+	wildfire_64	fe_what_am_i;
+	/* not complete */
+} wildfire_fe;
+
+typedef struct {
+	wildfire_64	pci_io_addr_ext;
+	wildfire_64	pci_ctrl;
+	wildfire_64	pci_err_sum;
+	wildfire_64	pci_err_addr;
+	wildfire_64	pci_stall_cnt;
+	wildfire_64	pci_iack_special;
+	wildfire_64	__pad1[2];
+	wildfire_64	pci_pend_int;
+	wildfire_64	pci_sent_int;
+	wildfire_64	__pad2[54];
+	struct {
+		wildfire_64	wbase;
+		wildfire_64	wmask;
+		wildfire_64	tbase;
+	} pci_window[4];
+	wildfire_64	pci_flush_tlb;
+	wildfire_64	pci_perf_mon;
+} wildfire_pci;
+
+#define WILDFIRE_ENTITY_SHIFT		18
+
+#define WILDFIRE_GP_ENTITY		(0x10UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_IOP_ENTITY		(0x08UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSA_ENTITY		(0x04UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSD_ENTITY_SLOW	(0x05UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSD_ENTITY_FAST	(0x01UL << WILDFIRE_ENTITY_SHIFT)
+
+#define WILDFIRE_PCA_ENTITY(pca)	((0xc|(pca))<<WILDFIRE_ENTITY_SHIFT)
+
+#define WILDFIRE_BASE		(IDENT_ADDR | (1UL << 40))
+
+#define WILDFIRE_QBB_MASK	0x0fUL	/* for now, only 4 bits/16 QBBs */
+
+#define WILDFIRE_QBB(q)		((~((long)(q)) & WILDFIRE_QBB_MASK) << 36)
+#define WILDFIRE_HOSE(h)	((long)(h) << 33)
+
+#define WILDFIRE_QBB_IO(q)	(WILDFIRE_BASE | WILDFIRE_QBB(q))
+#define WILDFIRE_QBB_HOSE(q,h)	(WILDFIRE_QBB_IO(q) | WILDFIRE_HOSE(h))
+
+#define WILDFIRE_MEM(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x000000000UL)
+#define WILDFIRE_CONF(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FE000000UL)
+#define WILDFIRE_IO(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FF000000UL)
+
+#define WILDFIRE_qsd(q) \
+ ((wildfire_qsd *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSD_ENTITY_SLOW|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_fast_qsd() \
+ ((wildfire_fast_qsd *)(WILDFIRE_QBB_IO(0)|WILDFIRE_QSD_ENTITY_FAST|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_qsa(q) \
+ ((wildfire_qsa *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSA_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_iop(q) \
+ ((wildfire_iop *)(WILDFIRE_QBB_IO(q)|WILDFIRE_IOP_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_gp(q) \
+ ((wildfire_gp *)(WILDFIRE_QBB_IO(q)|WILDFIRE_GP_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_pca(q,pca) \
+ ((wildfire_pca *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_ne(q,pca) \
+ ((wildfire_ne *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(1UL<<16)))
+
+#define WILDFIRE_fe(q,pca) \
+ ((wildfire_fe *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(3UL<<15)))
+
+#define WILDFIRE_pci(q,h) \
+ ((wildfire_pci *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(((h)&6)>>1)|((((h)&1)|2)<<16)|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_IO_BIAS        WILDFIRE_IO(0,0)
+#define WILDFIRE_MEM_BIAS       WILDFIRE_MEM(0,0) /* ??? */
+
+/* The IO address space is larger than 0xffff */
+#define WILDFIRE_IO_SPACE	(8UL*1024*1024)
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *wildfire_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + WILDFIRE_IO_BIAS);
+}
+
+__EXTERN_INLINE void __iomem *wildfire_ioremap(unsigned long addr, 
+					       unsigned long size)
+{
+	return (void __iomem *)(addr + WILDFIRE_MEM_BIAS);
+}
+
+__EXTERN_INLINE int wildfire_is_ioaddr(unsigned long addr)
+{
+	return addr >= WILDFIRE_BASE;
+}
+
+__EXTERN_INLINE int wildfire_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)addr;
+	return (addr & 0x100000000UL) == 0;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX			wildfire
+#define wildfire_trivial_rw_bw		1
+#define wildfire_trivial_rw_lq		1
+#define wildfire_trivial_io_bw		1
+#define wildfire_trivial_io_lq		1
+#define wildfire_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_WILDFIRE__H__ */
diff --git a/include/asm-alpha/cputime.h b/include/asm-alpha/cputime.h
new file mode 100644
index 000000000000..19577fd93230
--- /dev/null
+++ b/include/asm-alpha/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_CPUTIME_H
+#define __ALPHA_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ALPHA_CPUTIME_H */
diff --git a/include/asm-alpha/current.h b/include/asm-alpha/current.h
new file mode 100644
index 000000000000..8d88a13c1bec
--- /dev/null
+++ b/include/asm-alpha/current.h
@@ -0,0 +1,9 @@
+#ifndef _ALPHA_CURRENT_H
+#define _ALPHA_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#define get_current()	(current_thread_info()->task + 0)
+#define current		get_current()
+
+#endif /* _ALPHA_CURRENT_H */
diff --git a/include/asm-alpha/delay.h b/include/asm-alpha/delay.h
new file mode 100644
index 000000000000..2aa3f410f7e6
--- /dev/null
+++ b/include/asm-alpha/delay.h
@@ -0,0 +1,10 @@
+#ifndef __ALPHA_DELAY_H
+#define __ALPHA_DELAY_H
+
+extern void __delay(int loops);
+extern void udelay(unsigned long usecs);
+
+extern void ndelay(unsigned long nsecs);
+#define ndelay ndelay
+
+#endif /* defined(__ALPHA_DELAY_H) */
diff --git a/include/asm-alpha/div64.h b/include/asm-alpha/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-alpha/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
new file mode 100644
index 000000000000..c675f282d6ad
--- /dev/null
+++ b/include/asm-alpha/dma-mapping.h
@@ -0,0 +1,67 @@
+#ifndef _ALPHA_DMA_MAPPING_H
+#define _ALPHA_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define dma_map_single(dev, va, size, dir)		\
+		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
+#define dma_unmap_single(dev, addr, size, dir)		\
+		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_alloc_coherent(dev, size, addr, gfp)	\
+		pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr)
+#define dma_free_coherent(dev, size, va, addr)		\
+		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
+#define dma_map_page(dev, page, off, size, dir)		\
+		pci_map_single(alpha_gendev_to_pci(dev), page, off, size, dir)
+#define dma_unmap_page(dev, addr, size, dir)		\
+		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_map_sg(dev, sg, nents, dir)			\
+		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_unmap_sg(dev, sg, nents, dir)		\
+		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_supported(dev, mask)			\
+		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
+#define dma_mapping_error(addr)				\
+		pci_dma_mapping_error(addr)
+
+#else	/* no PCI - no IOMMU. */
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, int gfp);
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction direction);
+
+#define dma_free_coherent(dev, size, va, addr)		\
+		free_pages((unsigned long)va, get_order(size))
+#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
+#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
+#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+#define dma_unmap_page(dev, addr, size, dir)	do { } while (0)
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+#define dma_mapping_error(addr)  (0)
+
+#endif	/* !CONFIG_PCI */
+
+#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(dev)			(1)
+
+int dma_set_mask(struct device *dev, u64 mask);
+
+#define dma_sync_single_for_cpu(dev, addr, size, dir)	  do { } while (0)
+#define dma_sync_single_for_device(dev, addr, size, dir)  do { } while (0)
+#define dma_sync_single_range(dev, addr, off, size, dir)  do { } while (0)
+#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  do { } while (0)
+#define dma_sync_sg_for_device(dev, sg, nents, dir)	  do { } while (0)
+#define dma_cache_sync(va, size, dir)			  do { } while (0)
+
+#define dma_get_cache_alignment()			  L1_CACHE_BYTES
+
+#endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/include/asm-alpha/dma.h b/include/asm-alpha/dma.h
new file mode 100644
index 000000000000..683afaa3deed
--- /dev/null
+++ b/include/asm-alpha/dma.h
@@ -0,0 +1,377 @@
+/*
+ * include/asm-alpha/dma.h
+ *
+ * This is essentially the same as the i386 DMA stuff, as the AlphaPCs
+ * use ISA-compatible dma.  The only extension is support for high-page
+ * registers that allow to set the top 8 bits of a 32-bit DMA address.
+ * This register should be written last when setting up a DMA address
+ * as this will also enable DMA across 64 KB boundaries.
+ */
+
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+#define dma_outb	outb
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/*
+  ISA DMA limitations on Alpha platforms,
+
+  These may be due to SIO (PCI<->ISA bridge) chipset limitation, or
+  just a wiring limit.
+*/
+
+/* The maximum address for ISA DMA transfer on Alpha XL, due to an
+   hardware SIO limitation, is 64MB.
+*/
+#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
+
+/* The maximum address for ISA DMA transfer on RUFFIAN,
+   due to an hardware SIO limitation, is 16MB.
+*/
+#define ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS	0x01000000UL
+
+/* The maximum address for ISA DMA transfer on SABLE, and some ALCORs,
+   due to an hardware SIO chip limitation, is 2GB.
+*/
+#define ALPHA_SABLE_MAX_ISA_DMA_ADDRESS		0x80000000UL
+#define ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS		0x80000000UL
+
+/*
+  Maximum address for all the others is the complete 32-bit bus
+  address space.
+*/
+#define ALPHA_MAX_ISA_DMA_ADDRESS		0x100000000UL
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
+#else
+# if defined(CONFIG_ALPHA_XL)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_RUFFIAN)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_SABLE)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_ALCOR)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS
+# else
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_MAX_ISA_DMA_ADDRESS
+# endif
+#endif
+
+/* If we have the iommu, we don't have any address limitations on DMA.
+   Otherwise (Nautilus, RX164), we have to have 0-16 Mb DMA zone
+   like i386. */
+#define MAX_DMA_ADDRESS		(alpha_mv.mv_pci_tbi ?	\
+				 ~0UL : IDENT_ADDR + 0x01000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+#define DMA1_EXT_MODE_REG	(0x400 | DMA1_MODE_REG)
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+#define DMA2_EXT_MODE_REG	(0x400 | DMA2_MODE_REG)
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_HIPAGE_0		(0x400 | DMA_PAGE_0)
+#define DMA_HIPAGE_1		(0x400 | DMA_PAGE_1)
+#define DMA_HIPAGE_2		(0x400 | DMA_PAGE_2)
+#define DMA_HIPAGE_3		(0x400 | DMA_PAGE_3)
+#define DMA_HIPAGE_4		(0x400 | DMA_PAGE_4)
+#define DMA_HIPAGE_5		(0x400 | DMA_PAGE_5)
+#define DMA_HIPAGE_6		(0x400 | DMA_PAGE_6)
+#define DMA_HIPAGE_7		(0x400 | DMA_PAGE_7)
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* set extended mode for a specific DMA channel */
+static __inline__ void set_dma_ext_mode(unsigned int dmanr, char ext_mode)
+{
+	if (dmanr<=3)
+		dma_outb(ext_mode | dmanr,  DMA1_EXT_MODE_REG);
+	else
+		dma_outb(ext_mode | (dmanr&3),  DMA2_EXT_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+	set_dma_page(dmanr, a>>16);	/* set hipage last to enable 32-bit mode */
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+#define KERNEL_HAVE_CHECK_DMA
+extern int check_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-alpha/elf.h b/include/asm-alpha/elf.h
new file mode 100644
index 000000000000..e94a945a2314
--- /dev/null
+++ b/include/asm-alpha/elf.h
@@ -0,0 +1,185 @@
+#ifndef __ASM_ALPHA_ELF_H
+#define __ASM_ALPHA_ELF_H
+
+/* Special values for the st_other field in the symbol table.  */
+
+#define STO_ALPHA_NOPV		0x80
+#define STO_ALPHA_STD_GPLOAD	0x88
+
+/*
+ * Alpha ELF relocation types
+ */
+#define R_ALPHA_NONE            0       /* No reloc */
+#define R_ALPHA_REFLONG         1       /* Direct 32 bit */
+#define R_ALPHA_REFQUAD         2       /* Direct 64 bit */
+#define R_ALPHA_GPREL32         3       /* GP relative 32 bit */
+#define R_ALPHA_LITERAL         4       /* GP relative 16 bit w/optimization */
+#define R_ALPHA_LITUSE          5       /* Optimization hint for LITERAL */
+#define R_ALPHA_GPDISP          6       /* Add displacement to GP */
+#define R_ALPHA_BRADDR          7       /* PC+4 relative 23 bit shifted */
+#define R_ALPHA_HINT            8       /* PC+4 relative 16 bit shifted */
+#define R_ALPHA_SREL16          9       /* PC relative 16 bit */
+#define R_ALPHA_SREL32          10      /* PC relative 32 bit */
+#define R_ALPHA_SREL64          11      /* PC relative 64 bit */
+#define R_ALPHA_GPRELHIGH       17      /* GP relative 32 bit, high 16 bits */
+#define R_ALPHA_GPRELLOW        18      /* GP relative 32 bit, low 16 bits */
+#define R_ALPHA_GPREL16         19      /* GP relative 16 bit */
+#define R_ALPHA_COPY            24      /* Copy symbol at runtime */
+#define R_ALPHA_GLOB_DAT        25      /* Create GOT entry */
+#define R_ALPHA_JMP_SLOT        26      /* Create PLT entry */
+#define R_ALPHA_RELATIVE        27      /* Adjust by program base */
+#define R_ALPHA_BRSGP		28
+#define R_ALPHA_TLSGD           29
+#define R_ALPHA_TLS_LDM         30
+#define R_ALPHA_DTPMOD64        31
+#define R_ALPHA_GOTDTPREL       32
+#define R_ALPHA_DTPREL64        33
+#define R_ALPHA_DTPRELHI        34
+#define R_ALPHA_DTPRELLO        35
+#define R_ALPHA_DTPREL16        36
+#define R_ALPHA_GOTTPREL        37
+#define R_ALPHA_TPREL64         38
+#define R_ALPHA_TPRELHI         39
+#define R_ALPHA_TPRELLO         40
+#define R_ALPHA_TPREL16         41
+
+#define SHF_ALPHA_GPREL		0x10000000
+
+/* Legal values for e_flags field of Elf64_Ehdr.  */
+
+#define EF_ALPHA_32BIT		1	/* All addresses are below 2GB */
+
+/*
+ * ELF register definitions..
+ */
+
+/*
+ * The OSF/1 version of <sys/procfs.h> makes gregset_t 46 entries long.
+ * I have no idea why that is so.  For now, we just leave it at 33
+ * (32 general regs + processor status word). 
+ */
+#define ELF_NGREG	33
+#define ELF_NFPREG	32
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_ALPHA
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	8192
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x1000000)
+
+/* $0 is set by ld.so to a pointer to a function which might be 
+   registered using atexit.  This provides a mean for the dynamic
+   linker to call DT_FINI functions for shared libraries that have
+   been loaded before the code runs.
+
+   So that we can use the same startup file with static executables,
+   we start programs with a value of 0 to indicate that there is no
+   such function.  */
+
+#define ELF_PLAT_INIT(_r, load_addr)	_r->r0 = 0
+
+/* The registers are layed out in pt_regs for PAL and syscall
+   convenience.  Re-order them for the linear elf_gregset_t.  */
+
+struct pt_regs;
+struct thread_info;
+struct task_struct;
+extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt,
+			    struct thread_info *ti);
+#define ELF_CORE_COPY_REGS(DEST, REGS) \
+	dump_elf_thread(DEST, REGS, current_thread_info());
+
+/* Similar, but for a thread other than current.  */
+
+extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
+#define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
+	dump_elf_task(*(DEST), TASK)
+
+/* Similar, but for the FP registers.  */
+
+extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
+#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
+	dump_elf_task_fp(*(DEST), TASK)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This is trivial on Alpha, 
+   but not so on other machines. */
+
+#define ELF_HWCAP  (~amask(-1))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM				\
+({						\
+	enum implver_enum i_ = implver();	\
+	( i_ == IMPLVER_EV4 ? "ev4"		\
+	: i_ == IMPLVER_EV5			\
+	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
+})
+
+/* Reserve these numbers for any future use of a VDSO.  */
+#if 0
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/* More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+   value is -1, then the cache doesn't exist.  Otherwise:
+
+      bit 0-3:	  Cache set-associativity; 0 means fully associative.
+      bit 4-7:	  Log2 of cacheline size.
+      bit 8-31:	  Size of the entire cache >> 8.
+      bit 32-63:  Reserved.
+*/
+
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+#define AT_L3_CACHESHAPE	37
+
+#ifdef __KERNEL__
+
+#define SET_PERSONALITY(EX, IBCS2)				\
+	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
+	   ? PER_LINUX_32BIT : (IBCS2) ? PER_SVR4 : PER_LINUX)
+
+extern int alpha_l1i_cacheshape;
+extern int alpha_l1d_cacheshape;
+extern int alpha_l2_cacheshape;
+extern int alpha_l3_cacheshape;
+
+#define ARCH_DLINFO						\
+  do {								\
+    NEW_AUX_ENT(AT_L1I_CACHESHAPE, alpha_l1i_cacheshape);	\
+    NEW_AUX_ENT(AT_L1D_CACHESHAPE, alpha_l1d_cacheshape);	\
+    NEW_AUX_ENT(AT_L2_CACHESHAPE, alpha_l2_cacheshape);		\
+    NEW_AUX_ENT(AT_L3_CACHESHAPE, alpha_l3_cacheshape);		\
+  } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ALPHA_ELF_H */
diff --git a/include/asm-alpha/err_common.h b/include/asm-alpha/err_common.h
new file mode 100644
index 000000000000..c25095942107
--- /dev/null
+++ b/include/asm-alpha/err_common.h
@@ -0,0 +1,118 @@
+/*
+ *	linux/include/asm-alpha/err_common.h
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Contains declarations and macros to support Alpha error handling
+ * 	implementations.
+ */
+
+#ifndef __ALPHA_ERR_COMMON_H
+#define __ALPHA_ERR_COMMON_H 1
+
+/*
+ * SCB Vector definitions
+ */
+#define SCB_Q_SYSERR	0x620
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+#define SCB_Q_SYSEVENT	0x680
+
+/*
+ * Disposition definitions for logout frame parser
+ */
+#define MCHK_DISPOSITION_UNKNOWN_ERROR		0x00
+#define MCHK_DISPOSITION_REPORT			0x01
+#define MCHK_DISPOSITION_DISMISS		0x02
+
+/*
+ * Error Log definitions
+ */
+/*
+ * Types
+ */
+
+#define EL_CLASS__TERMINATION		(0)
+#  define EL_TYPE__TERMINATION__TERMINATION		(0)
+#define EL_CLASS__HEADER		(5)
+#  define EL_TYPE__HEADER__SYSTEM_ERROR_FRAME		(1)
+#  define EL_TYPE__HEADER__SYSTEM_EVENT_FRAME		(2)
+#  define EL_TYPE__HEADER__HALT_FRAME			(3)
+#  define EL_TYPE__HEADER__LOGOUT_FRAME			(19)
+#define EL_CLASS__GENERAL_NOTIFICATION	(9)
+#define EL_CLASS__PCI_ERROR_FRAME	(11)
+#define EL_CLASS__REGATTA_FAMILY	(12)
+#  define EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME	(1)
+#  define EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME		(2)
+#  define EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME		(3)
+#  define EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED	(8)
+#  define EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED	(9)
+#  define EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED	(10)
+#  define EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT	(11)
+#  define EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT	(12)
+#define EL_CLASS__PAL                   (14)
+#  define EL_TYPE__PAL__LOGOUT_FRAME                    (1)
+#  define EL_TYPE__PAL__EV7_PROCESSOR			(4)
+#  define EL_TYPE__PAL__EV7_ZBOX			(5)
+#  define EL_TYPE__PAL__EV7_RBOX			(6)
+#  define EL_TYPE__PAL__EV7_IO				(7)
+#  define EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE	(10)
+#  define EL_TYPE__PAL__ENV__AIRMOVER_FAN		(11)
+#  define EL_TYPE__PAL__ENV__VOLTAGE			(12)
+#  define EL_TYPE__PAL__ENV__INTRUSION			(13)
+#  define EL_TYPE__PAL__ENV__POWER_SUPPLY		(14)
+#  define EL_TYPE__PAL__ENV__LAN			(15)
+#  define EL_TYPE__PAL__ENV__HOT_PLUG			(16)
+
+union el_timestamp {
+	struct {
+		u8 second;
+		u8 minute;
+		u8 hour;
+		u8 day;
+		u8 month;
+		u8 year;
+	} b;
+	u64 as_int;
+};
+
+struct el_subpacket {
+	u16 length;		/* length of header (in bytes)	*/
+	u16 class;		/* header class and type...   	*/
+	u16 type;		/* ...determine content     	*/
+	u16 revision;		/* header revision 		*/
+	union {
+		struct {	/* Class 5, Type 1 - System Error	*/
+			u32 frame_length;
+			u32 frame_packet_count;			
+		} sys_err;			
+		struct {	/* Class 5, Type 2 - System Event 	*/
+			union el_timestamp timestamp;
+			u32 frame_length;
+			u32 frame_packet_count;			
+		} sys_event;
+		struct {	/* Class 5, Type 3 - Double Error Halt	*/
+			u16 halt_code;
+			u16 reserved;
+			union el_timestamp timestamp;
+			u32 frame_length;
+			u32 frame_packet_count;
+		} err_halt;
+		struct {	/* Clasee 5, Type 19 - Logout Frame Header */
+			u32 frame_length;
+			u32 frame_flags;
+			u32 cpu_offset;	
+			u32 system_offset;
+		} logout_header;
+		struct {	/* Class 12 - Regatta			*/
+			u64 cpuid;
+			u64 data_start[1];
+		} regatta_frame;
+		struct {	/* Raw 				        */
+			u64 data_start[1];
+		} raw;
+	} by_type;
+};
+
+#endif /* __ALPHA_ERR_COMMON_H */
diff --git a/include/asm-alpha/err_ev6.h b/include/asm-alpha/err_ev6.h
new file mode 100644
index 000000000000..ea637791e4a9
--- /dev/null
+++ b/include/asm-alpha/err_ev6.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_ERR_EV6_H
+#define __ALPHA_ERR_EV6_H 1
+
+/* Dummy include for now. */
+
+#endif /* __ALPHA_ERR_EV6_H */
diff --git a/include/asm-alpha/err_ev7.h b/include/asm-alpha/err_ev7.h
new file mode 100644
index 000000000000..87f99777c2e4
--- /dev/null
+++ b/include/asm-alpha/err_ev7.h
@@ -0,0 +1,202 @@
+#ifndef __ALPHA_ERR_EV7_H
+#define __ALPHA_ERR_EV7_H 1
+
+/*
+ * Data for el packet class PAL (14), type LOGOUT_FRAME (1)
+ */
+struct ev7_pal_logout_subpacket {
+	u32 mchk_code;
+	u32 subpacket_count;
+	u64 whami;
+	u64 rbox_whami;
+	u64 rbox_int;
+	u64 exc_addr;
+	union el_timestamp timestamp;
+	u64 halt_code;
+	u64 reserved;
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_PROCESSOR (4)
+ */
+struct ev7_pal_processor_subpacket {
+	u64 i_stat;
+	u64 dc_stat;
+	u64 c_addr;
+	u64 c_syndrome_1;
+	u64 c_syndrome_0;
+	u64 c_stat;
+	u64 c_sts;
+	u64 mm_stat;
+	u64 exc_addr;
+	u64 ier_cm;
+	u64 isum;
+	u64 pal_base;
+	u64 i_ctl;
+	u64 process_context;
+	u64 cbox_ctl;
+	u64 cbox_stp_ctl;
+	u64 cbox_acc_ctl;
+	u64 cbox_lcl_set;
+	u64 cbox_gbl_set;
+	u64 bbox_ctl;
+	u64 bbox_err_sts;
+	u64 bbox_err_idx;
+	u64 cbox_ddp_err_sts;
+	u64 bbox_dat_rmp;
+	u64 reserved[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_ZBOX (5)
+ */
+struct ev7_pal_zbox_subpacket {
+	u32 zbox0_dram_err_status_1;
+	u32 zbox0_dram_err_status_2;
+	u32 zbox0_dram_err_status_3;
+	u32 zbox0_dram_err_ctl;
+	u32 zbox0_dram_err_adr;
+	u32 zbox0_dift_timeout;
+	u32 zbox0_dram_mapper_ctl;
+	u32 zbox0_frc_err_adr;
+	u32 zbox0_dift_err_status;
+	u32 reserved1;
+	u32 zbox1_dram_err_status_1;
+	u32 zbox1_dram_err_status_2;
+	u32 zbox1_dram_err_status_3;
+	u32 zbox1_dram_err_ctl;
+	u32 zbox1_dram_err_adr;
+	u32 zbox1_dift_timeout;
+	u32 zbox1_dram_mapper_ctl;
+	u32 zbox1_frc_err_adr;
+	u32 zbox1_dift_err_status;
+	u32 reserved2;
+	u64 cbox_ctl;
+	u64 cbox_stp_ctl;
+	u64 zbox0_error_pa;
+	u64 zbox1_error_pa;
+	u64 zbox0_ored_syndrome;
+	u64 zbox1_ored_syndrome;
+	u64 reserved3[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_RBOX (6)
+ */
+struct ev7_pal_rbox_subpacket {
+	u64 rbox_cfg;
+	u64 rbox_n_cfg;
+	u64 rbox_s_cfg;
+	u64 rbox_e_cfg;
+	u64 rbox_w_cfg;
+	u64 rbox_n_err;
+	u64 rbox_s_err;
+	u64 rbox_e_err;
+	u64 rbox_w_err;
+	u64 rbox_io_cfg;
+	u64 rbox_io_err;
+	u64 rbox_l_err;
+	u64 rbox_whoami;
+	u64 rbox_imask;
+	u64 rbox_intq;
+	u64 rbox_int;
+	u64 reserved[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_IO (7)
+ */
+struct ev7_pal_io_one_port {
+	u64 pox_err_sum;
+	u64 pox_tlb_err;
+	u64 pox_spl_cmplt;
+	u64 pox_trans_sum;
+	u64 pox_first_err;
+	u64 pox_mult_err;
+	u64 pox_dm_source;
+	u64 pox_dm_dest;
+	u64 pox_dm_size;
+	u64 pox_dm_ctrl;
+	u64 reserved;
+};
+
+struct ev7_pal_io_subpacket {
+	u64 io_asic_rev;
+	u64 io_sys_rev;
+	u64 io7_uph;
+	u64 hpi_ctl;
+	u64 crd_ctl;
+	u64 hei_ctl;
+	u64 po7_error_sum;
+	u64 po7_uncrr_sym;
+	u64 po7_crrct_sym;
+	u64 po7_ugbge_sym;
+	u64 po7_err_pkt0;
+	u64 po7_err_pkt1;
+	u64 reserved[2];
+	struct ev7_pal_io_one_port ports[4];
+};
+
+/*
+ * Environmental subpacket. Data used for el packets:
+ * 	   class PAL (14), type AMBIENT_TEMPERATURE (10)
+ * 	   class PAL (14), type AIRMOVER_FAN (11)
+ * 	   class PAL (14), type VOLTAGE (12)
+ * 	   class PAL (14), type INTRUSION (13)
+ *	   class PAL (14), type POWER_SUPPLY (14)
+ *	   class PAL (14), type LAN (15)
+ *	   class PAL (14), type HOT_PLUG (16)
+ */
+struct ev7_pal_environmental_subpacket {
+	u16 cabinet;
+	u16 drawer;
+	u16 reserved1[2];
+	u8 module_type;
+	u8 unit_id;		/* unit reporting condition */
+	u8 reserved2;
+	u8 condition;		/* condition reported       */
+};
+
+/*
+ * Convert environmental type to index
+ */
+static inline int ev7_lf_env_index(int type)
+{
+	BUG_ON((type < EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE) 
+	       || (type > EL_TYPE__PAL__ENV__HOT_PLUG));
+
+	return type - EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE;
+}
+
+/*
+ * Data for generic el packet class PAL.
+ */
+struct ev7_pal_subpacket {
+	union {
+		struct ev7_pal_logout_subpacket logout;	     /* Type     1 */
+		struct ev7_pal_processor_subpacket ev7;	     /* Type     4 */
+		struct ev7_pal_zbox_subpacket zbox;	     /* Type     5 */
+		struct ev7_pal_rbox_subpacket rbox;	     /* Type     6 */
+		struct ev7_pal_io_subpacket io;		     /* Type     7 */
+		struct ev7_pal_environmental_subpacket env;  /* Type 10-16 */
+		u64 as_quad[1];				     /* Raw u64    */
+	} by_type;
+};
+
+/*
+ * Struct to contain collected logout from subpackets.
+ */
+struct ev7_lf_subpackets {
+	struct ev7_pal_logout_subpacket *logout;		/* Type  1 */
+	struct ev7_pal_processor_subpacket *ev7;		/* Type  4 */
+	struct ev7_pal_zbox_subpacket *zbox;			/* Type  5 */
+	struct ev7_pal_rbox_subpacket *rbox;			/* Type  6 */
+	struct ev7_pal_io_subpacket *io;			/* Type  7 */
+	struct ev7_pal_environmental_subpacket *env[7];	     /* Type 10-16 */
+
+	unsigned int io_pid;
+};
+
+#endif /* __ALPHA_ERR_EV7_H */
+
+
diff --git a/include/asm-alpha/errno.h b/include/asm-alpha/errno.h
new file mode 100644
index 000000000000..c85ab6b9d6c6
--- /dev/null
+++ b/include/asm-alpha/errno.h
@@ -0,0 +1,119 @@
+#ifndef _ALPHA_ERRNO_H
+#define _ALPHA_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#undef	EAGAIN			/* 11 in errno-base.h */
+
+#define	EDEADLK		11	/* Resource deadlock would occur */
+
+#define	EAGAIN		35	/* Try again */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Network dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+
+#define	ENOLCK		77	/* No record locks available */
+#define	ENOSYS		78	/* Function not implemented */
+
+#define	ENOMSG		80	/* No message of desired type */
+#define	EIDRM		81	/* Identifier removed */
+#define	ENOSR		82	/* Out of streams resources */
+#define	ETIME		83	/* Timer expired */
+#define	EBADMSG		84	/* Not a data message */
+#define	EPROTO		85	/* Protocol error */
+#define	ENODATA		86	/* No data available */
+#define	ENOSTR		87	/* Device not a stream */
+
+#define	ENOPKG		92	/* Package not installed */
+
+#define	EILSEQ		116	/* Illegal byte sequence */
+
+/* The following are just random noise.. */
+#define	ECHRNG		88	/* Channel number out of range */
+#define	EL2NSYNC	89	/* Level 2 not synchronized */
+#define	EL3HLT		90	/* Level 3 halted */
+#define	EL3RST		91	/* Level 3 reset */
+
+#define	ELNRNG		93	/* Link number out of range */
+#define	EUNATCH		94	/* Protocol driver not attached */
+#define	ENOCSI		95	/* No CSI structure available */
+#define	EL2HLT		96	/* Level 2 halted */
+#define	EBADE		97	/* Invalid exchange */
+#define	EBADR		98	/* Invalid request descriptor */
+#define	EXFULL		99	/* Exchange full */
+#define	ENOANO		100	/* No anode */
+#define	EBADRQC		101	/* Invalid request code */
+#define	EBADSLT		102	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		104	/* Bad font file format */
+#define	ENONET		105	/* Machine is not on the network */
+#define	ENOLINK		106	/* Link has been severed */
+#define	EADV		107	/* Advertise error */
+#define	ESRMNT		108	/* Srmount error */
+#define	ECOMM		109	/* Communication error on send */
+#define	EMULTIHOP	110	/* Multihop attempted */
+#define	EDOTDOT		111	/* RFS specific error */
+#define	EOVERFLOW	112	/* Value too large for defined data type */
+#define	ENOTUNIQ	113	/* Name not unique on network */
+#define	EBADFD		114	/* File descriptor in bad state */
+#define	EREMCHG		115	/* Remote address changed */
+
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+
+#define	ELIBACC		122	/* Can not access a needed shared library */
+#define	ELIBBAD		123	/* Accessing a corrupted shared library */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+#define	ELIBMAX		125	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	126	/* Cannot exec a shared library directly */
+#define	ERESTART	127	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	128	/* Streams pipe error */
+
+#define ENOMEDIUM	129	/* No medium found */
+#define EMEDIUMTYPE	130	/* Wrong medium type */
+#define	ECANCELED	131	/* Operation Cancelled */
+#define	ENOKEY		132	/* Required key not available */
+#define	EKEYEXPIRED	133	/* Key has expired */
+#define	EKEYREVOKED	134	/* Key has been revoked */
+#define	EKEYREJECTED	135	/* Key was rejected by service */
+
+#endif
diff --git a/include/asm-alpha/fcntl.h b/include/asm-alpha/fcntl.h
new file mode 100644
index 000000000000..6b7d6c1649ce
--- /dev/null
+++ b/include/asm-alpha/fcntl.h
@@ -0,0 +1,75 @@
+#ifndef _ALPHA_FCNTL_H
+#define _ALPHA_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	  0003
+#define O_RDONLY	    00
+#define O_WRONLY	    01
+#define O_RDWR		    02
+#define O_CREAT		 01000	/* not fcntl */
+#define O_TRUNC		 02000	/* not fcntl */
+#define O_EXCL		 04000	/* not fcntl */
+#define O_NOCTTY	010000	/* not fcntl */
+
+#define O_NONBLOCK	 00004
+#define O_APPEND	 00010
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		040000
+#define FASYNC		020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	0100000	/* must be a directory */
+#define O_NOFOLLOW	0200000 /* don't follow links */
+#define O_LARGEFILE	0400000 /* will be set by the kernel on every open */
+#define O_DIRECT	02000000 /* direct disk access - should check with OSF/1 */
+#define O_NOATIME	04000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4       /* set file->f_flags */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+
+#define F_SETOWN	5	/*  for sockets. */
+#define F_GETOWN	6	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		8
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		16	/* or 3 */
+#define F_SHLCK		32	/* or 4 */
+
+#define F_INPROGRESS	64
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+#define LOCK_MAND      32      /* This is a mandatory flock */
+#define LOCK_READ      64      /* ... Which allows concurrent read operations */
+#define LOCK_WRITE     128     /* ... Which allows concurrent write operations */
+#define LOCK_RW        192     /* ... Which allows concurrent read & write ops */
+ 
+struct flock {
+	short l_type;
+	short l_whence;
+	__kernel_off_t l_start;
+	__kernel_off_t l_len;
+	__kernel_pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE  1024
+
+#endif
diff --git a/include/asm-alpha/floppy.h b/include/asm-alpha/floppy.h
new file mode 100644
index 000000000000..289a00d51a90
--- /dev/null
+++ b/include/asm-alpha/floppy.h
@@ -0,0 +1,119 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_ALPHA_FLOPPY_H
+#define __ASM_ALPHA_FLOPPY_H
+
+#include <linux/config.h>
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()        disable_dma(FLOPPY_DMA)
+#define fd_request_dma()        request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt, \
+					    SA_INTERRUPT|SA_SAMPLE_RANDOM, \
+				            "floppy", NULL)
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define fd_dma_setup(addr,size,mode,io) alpha_fd_dma_setup(addr,size,mode,io)
+
+static __inline__ int 
+alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */
+		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+#endif /* CONFIG_PCI */
+
+__inline__ void virtual_dma_init(void)
+{
+	/* Nothing to do on an Alpha */
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information doesn't work on the alpha..
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+/*
+ * Most Alphas have no problems with floppy DMA crossing 64k borders,
+ * except for certain ones, like XL and RUFFIAN.
+ *
+ * However, the test is simple and fast, and this *is* floppy, after all,
+ * so we do it for all platforms, just to make sure.
+ *
+ * This is advantageous in other circumstances as well, as in moving
+ * about the PCI DMA windows and forcing the floppy to start doing
+ * scatter-gather when it never had before, and there *is* a problem
+ * on that platform... ;-}
+ */
+
+static inline unsigned long CROSS_64KB(void *a, unsigned long s)
+{
+	unsigned long p = (unsigned long)a;
+	return ((p + s - 1) ^ p) & ~0xffffUL;
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/include/asm-alpha/fpu.h b/include/asm-alpha/fpu.h
new file mode 100644
index 000000000000..c203fc2fa5cd
--- /dev/null
+++ b/include/asm-alpha/fpu.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_ALPHA_FPU_H
+#define __ASM_ALPHA_FPU_H
+
+/*
+ * Alpha floating-point control register defines:
+ */
+#define FPCR_DNOD	(1UL<<47)	/* denorm INV trap disable */
+#define FPCR_DNZ	(1UL<<48)	/* denorms to zero */
+#define FPCR_INVD	(1UL<<49)	/* invalid op disable (opt.) */
+#define FPCR_DZED	(1UL<<50)	/* division by zero disable (opt.) */
+#define FPCR_OVFD	(1UL<<51)	/* overflow disable (optional) */
+#define FPCR_INV	(1UL<<52)	/* invalid operation */
+#define FPCR_DZE	(1UL<<53)	/* division by zero */
+#define FPCR_OVF	(1UL<<54)	/* overflow */
+#define FPCR_UNF	(1UL<<55)	/* underflow */
+#define FPCR_INE	(1UL<<56)	/* inexact */
+#define FPCR_IOV	(1UL<<57)	/* integer overflow */
+#define FPCR_UNDZ	(1UL<<60)	/* underflow to zero (opt.) */
+#define FPCR_UNFD	(1UL<<61)	/* underflow disable (opt.) */
+#define FPCR_INED	(1UL<<62)	/* inexact disable (opt.) */
+#define FPCR_SUM	(1UL<<63)	/* summary bit */
+
+#define FPCR_DYN_SHIFT	58		/* first dynamic rounding mode bit */
+#define FPCR_DYN_CHOPPED (0x0UL << FPCR_DYN_SHIFT)	/* towards 0 */
+#define FPCR_DYN_MINUS	 (0x1UL << FPCR_DYN_SHIFT)	/* towards -INF */
+#define FPCR_DYN_NORMAL	 (0x2UL << FPCR_DYN_SHIFT)	/* towards nearest */
+#define FPCR_DYN_PLUS	 (0x3UL << FPCR_DYN_SHIFT)	/* towards +INF */
+#define FPCR_DYN_MASK	 (0x3UL << FPCR_DYN_SHIFT)
+
+#define FPCR_MASK	0xffff800000000000L
+
+/*
+ * IEEE trap enables are implemented in software.  These per-thread
+ * bits are stored in the "ieee_state" field of "struct thread_info".
+ * Thus, the bits are defined so as not to conflict with the
+ * floating-point enable bit (which is architected).  On top of that,
+ * we want to make these bits compatible with OSF/1 so
+ * ieee_set_fp_control() etc. can be implemented easily and
+ * compatibly.  The corresponding definitions are in
+ * /usr/include/machine/fpu.h under OSF/1.
+ */
+#define IEEE_TRAP_ENABLE_INV	(1UL<<1)	/* invalid op */
+#define IEEE_TRAP_ENABLE_DZE	(1UL<<2)	/* division by zero */
+#define IEEE_TRAP_ENABLE_OVF	(1UL<<3)	/* overflow */
+#define IEEE_TRAP_ENABLE_UNF	(1UL<<4)	/* underflow */
+#define IEEE_TRAP_ENABLE_INE	(1UL<<5)	/* inexact */
+#define IEEE_TRAP_ENABLE_DNO	(1UL<<6)	/* denorm */
+#define IEEE_TRAP_ENABLE_MASK	(IEEE_TRAP_ENABLE_INV | IEEE_TRAP_ENABLE_DZE |\
+				 IEEE_TRAP_ENABLE_OVF | IEEE_TRAP_ENABLE_UNF |\
+				 IEEE_TRAP_ENABLE_INE | IEEE_TRAP_ENABLE_DNO)
+
+/* Denorm and Underflow flushing */
+#define IEEE_MAP_DMZ		(1UL<<12)	/* Map denorm inputs to zero */
+#define IEEE_MAP_UMZ		(1UL<<13)	/* Map underflowed outputs to zero */
+
+#define IEEE_MAP_MASK		(IEEE_MAP_DMZ | IEEE_MAP_UMZ)
+
+/* status bits coming from fpcr: */
+#define IEEE_STATUS_INV		(1UL<<17)
+#define IEEE_STATUS_DZE		(1UL<<18)
+#define IEEE_STATUS_OVF		(1UL<<19)
+#define IEEE_STATUS_UNF		(1UL<<20)
+#define IEEE_STATUS_INE		(1UL<<21)
+#define IEEE_STATUS_DNO		(1UL<<22)
+
+#define IEEE_STATUS_MASK	(IEEE_STATUS_INV | IEEE_STATUS_DZE |	\
+				 IEEE_STATUS_OVF | IEEE_STATUS_UNF |	\
+				 IEEE_STATUS_INE | IEEE_STATUS_DNO)
+
+#define IEEE_SW_MASK		(IEEE_TRAP_ENABLE_MASK |		\
+				 IEEE_STATUS_MASK | IEEE_MAP_MASK)
+
+#define IEEE_CURRENT_RM_SHIFT	32
+#define IEEE_CURRENT_RM_MASK	(3UL<<IEEE_CURRENT_RM_SHIFT)
+
+#define IEEE_STATUS_TO_EXCSUM_SHIFT	16
+
+#define IEEE_INHERIT    (1UL<<63)	/* inherit on thread create? */
+
+/*
+ * Convert the software IEEE trap enable and status bits into the
+ * hardware fpcr format. 
+ *
+ * Digital Unix engineers receive my thanks for not defining the
+ * software bits identical to the hardware bits.  The chip designers
+ * receive my thanks for making all the not-implemented fpcr bits
+ * RAZ forcing us to use system calls to read/write this value.
+ */
+
+static inline unsigned long
+ieee_swcr_to_fpcr(unsigned long sw)
+{
+	unsigned long fp;
+	fp = (sw & IEEE_STATUS_MASK) << 35;
+	fp |= (sw & IEEE_MAP_DMZ) << 36;
+	fp |= (sw & IEEE_STATUS_MASK ? FPCR_SUM : 0);
+	fp |= (~sw & (IEEE_TRAP_ENABLE_INV
+		      | IEEE_TRAP_ENABLE_DZE
+		      | IEEE_TRAP_ENABLE_OVF)) << 48;
+	fp |= (~sw & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE)) << 57;
+	fp |= (sw & IEEE_MAP_UMZ ? FPCR_UNDZ | FPCR_UNFD : 0);
+	fp |= (~sw & IEEE_TRAP_ENABLE_DNO) << 41;
+	return fp;
+}
+
+static inline unsigned long
+ieee_fpcr_to_swcr(unsigned long fp)
+{
+	unsigned long sw;
+	sw = (fp >> 35) & IEEE_STATUS_MASK;
+	sw |= (fp >> 36) & IEEE_MAP_DMZ;
+	sw |= (~fp >> 48) & (IEEE_TRAP_ENABLE_INV
+			     | IEEE_TRAP_ENABLE_DZE
+			     | IEEE_TRAP_ENABLE_OVF);
+	sw |= (~fp >> 57) & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE);
+	sw |= (fp >> 47) & IEEE_MAP_UMZ;
+	sw |= (~fp >> 41) & IEEE_TRAP_ENABLE_DNO;
+	return sw;
+}
+
+#ifdef __KERNEL__
+
+/* The following two functions don't need trapb/excb instructions
+   around the mf_fpcr/mt_fpcr instructions because (a) the kernel
+   never generates arithmetic faults and (b) call_pal instructions
+   are implied trap barriers.  */
+
+static inline unsigned long
+rdfpcr(void)
+{
+	unsigned long tmp, ret;
+
+#if defined(__alpha_cix__) || defined(__alpha_fix__)
+	__asm__ __volatile__ (
+		"ftoit $f0,%0\n\t"
+		"mf_fpcr $f0\n\t"
+		"ftoit $f0,%1\n\t"
+		"itoft %0,$f0"
+		: "=r"(tmp), "=r"(ret));
+#else
+	__asm__ __volatile__ (
+		"stt $f0,%0\n\t"
+		"mf_fpcr $f0\n\t"
+		"stt $f0,%1\n\t"
+		"ldt $f0,%0"
+		: "=m"(tmp), "=m"(ret));
+#endif
+
+	return ret;
+}
+
+static inline void
+wrfpcr(unsigned long val)
+{
+	unsigned long tmp;
+
+#if defined(__alpha_cix__) || defined(__alpha_fix__)
+	__asm__ __volatile__ (
+		"ftoit $f0,%0\n\t"
+		"itoft %1,$f0\n\t"
+		"mt_fpcr $f0\n\t"
+		"itoft %0,$f0"
+		: "=&r"(tmp) : "r"(val));
+#else
+	__asm__ __volatile__ (
+		"stt $f0,%0\n\t"
+		"ldt $f0,%1\n\t"
+		"mt_fpcr $f0\n\t"
+		"ldt $f0,%0"
+		: "=m"(tmp) : "m"(val));
+#endif
+}
+
+static inline unsigned long
+swcr_update_status(unsigned long swcr, unsigned long fpcr)
+{
+	/* EV6 implements most of the bits in hardware.  Collect
+	   the acrued exception bits from the real fpcr.  */
+	if (implver() == IMPLVER_EV6) {
+		swcr &= ~IEEE_STATUS_MASK;
+		swcr |= (fpcr >> 35) & IEEE_STATUS_MASK;
+	}
+	return swcr;
+}
+
+extern unsigned long alpha_read_fp_reg (unsigned long reg);
+extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
+extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
+extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_ALPHA_FPU_H */
diff --git a/include/asm-alpha/gct.h b/include/asm-alpha/gct.h
new file mode 100644
index 000000000000..3504c704927c
--- /dev/null
+++ b/include/asm-alpha/gct.h
@@ -0,0 +1,58 @@
+#ifndef __ALPHA_GCT_H
+#define __ALPHA_GCT_H
+
+typedef u64 gct_id;
+typedef u64 gct6_handle;
+
+typedef struct __gct6_node {
+	u8 type;	
+	u8 subtype;
+	u16 size;
+	u32 hd_extension;
+	gct6_handle owner;
+	gct6_handle active_user;
+	gct_id id;
+	u64 flags;
+	u16 rev;
+	u16 change_counter;
+	u16 max_child;
+	u16 reserved1;
+	gct6_handle saved_owner;
+	gct6_handle affinity;
+	gct6_handle parent;
+	gct6_handle next;
+	gct6_handle prev;
+	gct6_handle child;
+	u64 fw_flags;
+	u64 os_usage;
+	u64 fru_id;
+	u32 checksum;
+	u32 magic;	/* 'GLXY' */
+} gct6_node;
+
+typedef struct {
+	u8 type;	
+	u8 subtype;
+	void (*callout)(gct6_node *);
+} gct6_search_struct;
+
+#define GCT_NODE_MAGIC	  0x59584c47	/* 'GLXY' */
+
+/* 
+ * node types 
+ */
+#define GCT_TYPE_HOSE			0x0E
+
+/*
+ * node subtypes
+ */
+#define GCT_SUBTYPE_IO_PORT_MODULE	0x2C
+
+#define GCT_NODE_PTR(off) ((gct6_node *)((char *)hwrpb + 		\
+					 hwrpb->frut_offset + 		\
+					 (gct6_handle)(off)))		\
+
+int gct6_find_nodes(gct6_node *, gct6_search_struct *);
+
+#endif /* __ALPHA_GCT_H */
+
diff --git a/include/asm-alpha/gentrap.h b/include/asm-alpha/gentrap.h
new file mode 100644
index 000000000000..ae50cc3192c7
--- /dev/null
+++ b/include/asm-alpha/gentrap.h
@@ -0,0 +1,37 @@
+#ifndef _ASMAXP_GENTRAP_H
+#define _ASMAXP_GENTRAP_H
+
+/*
+ * Definitions for gentrap causes.  They are generated by user-level
+ * programs and therefore should be compatible with the corresponding
+ * OSF/1 definitions.
+ */
+#define GEN_INTOVF	-1	/* integer overflow */
+#define GEN_INTDIV	-2	/* integer division by zero */
+#define GEN_FLTOVF	-3	/* fp overflow */
+#define GEN_FLTDIV	-4	/* fp division by zero */
+#define GEN_FLTUND	-5	/* fp underflow */
+#define GEN_FLTINV	-6	/* invalid fp operand */
+#define GEN_FLTINE	-7	/* inexact fp operand */
+#define GEN_DECOVF	-8	/* decimal overflow (for COBOL??) */
+#define GEN_DECDIV	-9	/* decimal division by zero */
+#define GEN_DECINV	-10	/* invalid decimal operand */
+#define GEN_ROPRAND	-11	/* reserved operand */
+#define GEN_ASSERTERR	-12	/* assertion error */
+#define GEN_NULPTRERR	-13	/* null pointer error */
+#define GEN_STKOVF	-14	/* stack overflow */
+#define GEN_STRLENERR	-15	/* string length error */
+#define GEN_SUBSTRERR	-16	/* substring error */
+#define GEN_RANGERR	-17	/* range error */
+#define GEN_SUBRNG	-18
+#define GEN_SUBRNG1	-19	 
+#define GEN_SUBRNG2	-20
+#define GEN_SUBRNG3	-21	/* these report range errors for */
+#define GEN_SUBRNG4	-22	/* subscripting (indexing) at levels 0..7 */
+#define GEN_SUBRNG5	-23
+#define GEN_SUBRNG6	-24
+#define GEN_SUBRNG7	-25
+
+/* the remaining codes (-26..-1023) are reserved. */
+
+#endif /* _ASMAXP_GENTRAP_H */
diff --git a/include/asm-alpha/hardirq.h b/include/asm-alpha/hardirq.h
new file mode 100644
index 000000000000..c0593f9b21e1
--- /dev/null
+++ b/include/asm-alpha/hardirq.h
@@ -0,0 +1,29 @@
+#ifndef _ALPHA_HARDIRQ_H
+#define _ALPHA_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned long __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	12
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially nestable IRQ sources in the system
+ * to nest on a single CPU. On Alpha, interrupts are masked at the CPU
+ * by IPL as well as at the system level. We only have 8 IPLs (UNIX PALcode)
+ * so we really only have 8 nestable IRQs, but allow some overhead
+ */
+#if (1 << HARDIRQ_BITS) < 16
+#error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* _ALPHA_HARDIRQ_H */
diff --git a/include/asm-alpha/hdreg.h b/include/asm-alpha/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-alpha/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-alpha/hw_irq.h b/include/asm-alpha/hw_irq.h
new file mode 100644
index 000000000000..a310b9efc906
--- /dev/null
+++ b/include/asm-alpha/hw_irq.h
@@ -0,0 +1,16 @@
+#ifndef _ALPHA_HW_IRQ_H
+#define _ALPHA_HW_IRQ_H
+
+#include <linux/config.h>
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+
+extern volatile unsigned long irq_err_count;
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define ACTUAL_NR_IRQS	alpha_mv.nr_irqs
+#else
+#define ACTUAL_NR_IRQS	NR_IRQS
+#endif
+
+#endif
diff --git a/include/asm-alpha/hwrpb.h b/include/asm-alpha/hwrpb.h
new file mode 100644
index 000000000000..8e8f871af7cf
--- /dev/null
+++ b/include/asm-alpha/hwrpb.h
@@ -0,0 +1,220 @@
+#ifndef __ALPHA_HWRPB_H
+#define __ALPHA_HWRPB_H
+
+#define INIT_HWRPB ((struct hwrpb_struct *) 0x10000000)
+
+/*
+ * DEC processor types for Alpha systems.  Found in HWRPB.
+ * These values are architected.
+ */
+
+#define EV3_CPU                 1       /* EV3                  */
+#define EV4_CPU                 2       /* EV4 (21064)          */
+#define LCA4_CPU                4       /* LCA4 (21066/21068)   */
+#define EV5_CPU                 5       /* EV5 (21164)          */
+#define EV45_CPU                6       /* EV4.5 (21064/xxx)    */
+#define EV56_CPU		7	/* EV5.6 (21164)	*/
+#define EV6_CPU			8	/* EV6 (21264)		*/
+#define PCA56_CPU		9	/* PCA56 (21164PC)	*/
+#define PCA57_CPU		10	/* PCA57 (notyet)	*/
+#define EV67_CPU		11	/* EV67 (21264A)	*/
+#define EV68CB_CPU		12	/* EV68CB (21264C)	*/
+#define EV68AL_CPU		13	/* EV68AL (21264B)	*/
+#define EV68CX_CPU		14	/* EV68CX (21264D)	*/
+#define EV7_CPU			15	/* EV7 (21364)		*/
+#define EV79_CPU		16	/* EV79 (21364??)	*/
+#define EV69_CPU		17	/* EV69 (21264/EV69A)	*/
+
+/*
+ * DEC system types for Alpha systems.  Found in HWRPB.
+ * These values are architected.
+ */
+
+#define ST_ADU			  1	/* Alpha ADU systype	*/
+#define ST_DEC_4000		  2	/* Cobra systype	*/
+#define ST_DEC_7000		  3	/* Ruby systype		*/
+#define ST_DEC_3000_500		  4	/* Flamingo systype	*/
+#define ST_DEC_2000_300		  6	/* Jensen systype	*/
+#define ST_DEC_3000_300		  7	/* Pelican systype	*/
+#define ST_DEC_2100_A500	  9	/* Sable systype	*/
+#define ST_DEC_AXPVME_64	 10	/* AXPvme system type	*/
+#define ST_DEC_AXPPCI_33	 11	/* NoName system type	*/
+#define ST_DEC_TLASER		 12	/* Turbolaser systype	*/
+#define ST_DEC_2100_A50		 13	/* Avanti systype	*/
+#define ST_DEC_MUSTANG		 14	/* Mustang systype	*/
+#define ST_DEC_ALCOR		 15	/* Alcor (EV5) systype	*/
+#define ST_DEC_1000		 17	/* Mikasa systype	*/
+#define ST_DEC_EB64		 18	/* EB64 systype		*/
+#define ST_DEC_EB66		 19	/* EB66 systype		*/
+#define ST_DEC_EB64P		 20	/* EB64+ systype	*/
+#define ST_DEC_BURNS		 21	/* laptop systype	*/
+#define ST_DEC_RAWHIDE		 22	/* Rawhide systype	*/
+#define ST_DEC_K2		 23	/* K2 systype		*/
+#define ST_DEC_LYNX		 24	/* Lynx systype		*/
+#define ST_DEC_XL		 25	/* Alpha XL systype	*/
+#define ST_DEC_EB164		 26	/* EB164 systype	*/
+#define ST_DEC_NORITAKE		 27	/* Noritake systype	*/
+#define ST_DEC_CORTEX		 28	/* Cortex systype	*/
+#define ST_DEC_MIATA		 30	/* Miata systype        */
+#define ST_DEC_XXM		 31	/* XXM systype		*/
+#define ST_DEC_TAKARA		 32	/* Takara systype	*/
+#define ST_DEC_YUKON		 33	/* Yukon systype	*/
+#define ST_DEC_TSUNAMI		 34	/* Tsunami systype	*/
+#define ST_DEC_WILDFIRE		 35	/* Wildfire systype	*/
+#define ST_DEC_CUSCO		 36	/* CUSCO systype	*/
+#define ST_DEC_EIGER		 37	/* Eiger systype	*/
+#define ST_DEC_TITAN		 38	/* Titan systype	*/
+#define ST_DEC_MARVEL		 39	/* Marvel systype	*/
+
+/* UNOFFICIAL!!! */
+#define ST_UNOFFICIAL_BIAS	100
+#define ST_DTI_RUFFIAN		101	/* RUFFIAN systype	*/
+
+/* Alpha Processor, Inc. systems */
+#define ST_API_BIAS		200
+#define ST_API_NAUTILUS		201	/* UP1000 systype	*/
+
+struct pcb_struct {
+	unsigned long ksp;
+	unsigned long usp;
+	unsigned long ptbr;
+	unsigned int pcc;
+	unsigned int asn;
+	unsigned long unique;
+	unsigned long flags;
+	unsigned long res1, res2;
+};
+
+struct percpu_struct {
+	unsigned long hwpcb[16];
+	unsigned long flags;
+	unsigned long pal_mem_size;
+	unsigned long pal_scratch_size;
+	unsigned long pal_mem_pa;
+	unsigned long pal_scratch_pa;
+	unsigned long pal_revision;
+	unsigned long type;
+	unsigned long variation;
+	unsigned long revision;
+	unsigned long serial_no[2];
+	unsigned long logout_area_pa;
+	unsigned long logout_area_len;
+	unsigned long halt_PCBB;
+	unsigned long halt_PC;
+	unsigned long halt_PS;
+	unsigned long halt_arg;
+	unsigned long halt_ra;
+	unsigned long halt_pv;
+	unsigned long halt_reason;
+	unsigned long res;
+	unsigned long ipc_buffer[21];
+	unsigned long palcode_avail[16];
+	unsigned long compatibility;
+	unsigned long console_data_log_pa;
+	unsigned long console_data_log_length;
+	unsigned long bcache_info;
+};
+
+struct procdesc_struct {
+	unsigned long weird_vms_stuff;
+	unsigned long address;
+};
+
+struct vf_map_struct {
+	unsigned long va;
+	unsigned long pa;
+	unsigned long count;
+};
+
+struct crb_struct {
+	struct procdesc_struct * dispatch_va;
+	struct procdesc_struct * dispatch_pa;
+	struct procdesc_struct * fixup_va;
+	struct procdesc_struct * fixup_pa;
+	/* virtual->physical map */
+	unsigned long map_entries;
+	unsigned long map_pages;
+	struct vf_map_struct map[1];
+};
+
+struct memclust_struct {
+	unsigned long start_pfn;
+	unsigned long numpages;
+	unsigned long numtested;
+	unsigned long bitmap_va;
+	unsigned long bitmap_pa;
+	unsigned long bitmap_chksum;
+	unsigned long usage;
+};
+
+struct memdesc_struct {
+	unsigned long chksum;
+	unsigned long optional_pa;
+	unsigned long numclusters;
+	struct memclust_struct cluster[0];
+};
+
+struct dsr_struct {
+	long smm;			/* SMM nubber used by LMF       */
+	unsigned long  lurt_off;	/* offset to LURT table         */
+	unsigned long  sysname_off;	/* offset to sysname char count */
+};
+
+struct hwrpb_struct {
+	unsigned long phys_addr;	/* check: physical address of the hwrpb */
+	unsigned long id;		/* check: "HWRPB\0\0\0" */
+	unsigned long revision;	
+	unsigned long size;		/* size of hwrpb */
+	unsigned long cpuid;
+	unsigned long pagesize;		/* 8192, I hope */
+	unsigned long pa_bits;		/* number of physical address bits */
+	unsigned long max_asn;
+	unsigned char ssn[16];		/* system serial number: big bother is watching */
+	unsigned long sys_type;
+	unsigned long sys_variation;
+	unsigned long sys_revision;
+	unsigned long intr_freq;	/* interval clock frequency * 4096 */
+	unsigned long cycle_freq;	/* cycle counter frequency */
+	unsigned long vptb;		/* Virtual Page Table Base address */
+	unsigned long res1;
+	unsigned long tbhb_offset;	/* Translation Buffer Hint Block */
+	unsigned long nr_processors;
+	unsigned long processor_size;
+	unsigned long processor_offset;
+	unsigned long ctb_nr;
+	unsigned long ctb_size;		/* console terminal block size */
+	unsigned long ctbt_offset;	/* console terminal block table offset */
+	unsigned long crb_offset;	/* console callback routine block */
+	unsigned long mddt_offset;	/* memory data descriptor table */
+	unsigned long cdb_offset;	/* configuration data block (or NULL) */
+	unsigned long frut_offset;	/* FRU table (or NULL) */
+	void (*save_terminal)(unsigned long);
+	unsigned long save_terminal_data;
+	void (*restore_terminal)(unsigned long);
+	unsigned long restore_terminal_data;
+	void (*CPU_restart)(unsigned long);
+	unsigned long CPU_restart_data;
+	unsigned long res2;
+	unsigned long res3;
+	unsigned long chksum;
+	unsigned long rxrdy;
+	unsigned long txrdy;
+	unsigned long dsr_offset;	/* "Dynamic System Recognition Data Block Table" */
+};
+
+#ifdef __KERNEL__
+
+extern struct hwrpb_struct *hwrpb;
+
+static inline void
+hwrpb_update_checksum(struct hwrpb_struct *h)
+{
+	unsigned long sum = 0, *l;
+        for (l = (unsigned long *) h; l < (unsigned long *) &h->chksum; ++l)
+                sum += *l;
+        h->chksum = sum;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_HWRPB_H */
diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
new file mode 100644
index 000000000000..68934a25931f
--- /dev/null
+++ b/include/asm-alpha/ide.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/asm-alpha/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the alpha architecture specific IDE code.
+ */
+
+#ifndef __ASMalpha_IDE_H
+#define __ASMalpha_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static inline int ide_default_irq(unsigned long base)
+{
+	switch (base) {
+		case 0x1f0: return 14;
+		case 0x170: return 15;
+		case 0x1e8: return 11;
+		case 0x168: return 10;
+		default:
+			return 0;
+	}
+}
+
+static inline unsigned long ide_default_io_base(int index)
+{
+	switch (index) {
+		case 0:	return 0x1f0;
+		case 1:	return 0x170;
+		case 2: return 0x1e8;
+		case 3: return 0x168;
+		default:
+			return 0;
+	}
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMalpha_IDE_H */
diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h
new file mode 100644
index 000000000000..871dd7ad909d
--- /dev/null
+++ b/include/asm-alpha/io.h
@@ -0,0 +1,682 @@
+#ifndef __ALPHA_IO_H
+#define __ALPHA_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/compiler.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/machvec.h>
+#include <asm/hwrpb.h>
+
+/* The generic header contains only prototypes.  Including it ensures that
+   the implementation we have here matches that interface.  */
+#include <asm-generic/iomap.h>
+
+/* We don't use IO slowdowns on the Alpha, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+/*
+ * Virtual -> physical identity mapping starts at this offset
+ */
+#ifdef USE_48_BIT_KSEG
+#define IDENT_ADDR     0xffff800000000000UL
+#else
+#define IDENT_ADDR     0xfffffc0000000000UL
+#endif
+
+/*
+ * We try to avoid hae updates (thus the cache), but when we
+ * do need to update the hae, we need to do it atomically, so
+ * that any interrupts wouldn't get confused with the hae
+ * register not being up-to-date with respect to the hardware
+ * value.
+ */
+static inline void __set_hae(unsigned long new_hae)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+
+	alpha_mv.hae_cache = new_hae;
+	*alpha_mv.hae_register = new_hae;
+	mb();
+	/* Re-read to make sure it was written.  */
+	new_hae = *alpha_mv.hae_register;
+
+	local_irq_restore(flags);
+}
+
+static inline void set_hae(unsigned long new_hae)
+{
+	if (new_hae != alpha_mv.hae_cache)
+		__set_hae(new_hae);
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+#ifdef USE_48_BIT_KSEG
+static inline unsigned long virt_to_phys(void *address)
+{
+	return (unsigned long)address - IDENT_ADDR;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *) (address + IDENT_ADDR);
+}
+#else
+static inline unsigned long virt_to_phys(void *address)
+{
+        unsigned long phys = (unsigned long)address;
+
+	/* Sign-extend from bit 41.  */
+	phys <<= (64 - 41);
+	phys = (long)phys >> (64 - 41);
+
+	/* Crop to the physical address width of the processor.  */
+        phys &= (1ul << hwrpb->pa_bits) - 1;
+
+        return phys;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+        return (void *)(IDENT_ADDR + (address & ((1ul << 41) - 1)));
+}
+#endif
+
+#define page_to_phys(page)	page_to_pa(page)
+
+/* This depends on working iommu.  */
+#define BIO_VMERGE_BOUNDARY	(alpha_mv.mv_pci_tbi ? PAGE_SIZE : 0)
+
+/* Maximum PIO space address supported?  */
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Change addresses as seen by the kernel (virtual) to addresses as
+ * seen by a device (bus), and vice versa.
+ *
+ * Note that this only works for a limited range of kernel addresses,
+ * and very well may not span all memory.  Consider this interface 
+ * deprecated in favour of the mapping functions in <asm/pci.h>.
+ */
+extern unsigned long __direct_map_base;
+extern unsigned long __direct_map_size;
+
+static inline unsigned long virt_to_bus(void *address)
+{
+	unsigned long phys = virt_to_phys(address);
+	unsigned long bus = phys + __direct_map_base;
+	return phys <= __direct_map_size ? bus : 0;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+	void *virt;
+
+	/* This check is a sanity check but also ensures that bus address 0
+	   maps to virtual address 0 which is useful to detect null pointers
+	   (the NCR driver is much simpler if NULL pointers are preserved).  */
+	address -= __direct_map_base;
+	virt = phys_to_virt(address);
+	return (long)address <= 0 ? NULL : virt;
+}
+
+/*
+ * There are different chipsets to interface the Alpha CPUs to the world.
+ */
+
+#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b)	a ## _ ## b
+
+#ifdef CONFIG_ALPHA_GENERIC
+
+/* In a generic kernel, we always go through the machine vector.  */
+
+#define REMAP1(TYPE, NAME, QUAL)					\
+static inline TYPE generic_##NAME(QUAL void __iomem *addr)		\
+{									\
+	return alpha_mv.mv_##NAME(addr);				\
+}
+
+#define REMAP2(TYPE, NAME, QUAL)					\
+static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
+{									\
+	alpha_mv.mv_##NAME(b, addr);					\
+}
+
+REMAP1(unsigned int, ioread8, /**/)
+REMAP1(unsigned int, ioread16, /**/)
+REMAP1(unsigned int, ioread32, /**/)
+REMAP1(u8, readb, const volatile)
+REMAP1(u16, readw, const volatile)
+REMAP1(u32, readl, const volatile)
+REMAP1(u64, readq, const volatile)
+
+REMAP2(u8, iowrite8, /**/)
+REMAP2(u16, iowrite16, /**/)
+REMAP2(u32, iowrite32, /**/)
+REMAP2(u8, writeb, volatile)
+REMAP2(u16, writew, volatile)
+REMAP2(u32, writel, volatile)
+REMAP2(u64, writeq, volatile)
+
+#undef REMAP1
+#undef REMAP2
+
+static inline void __iomem *generic_ioportmap(unsigned long a)
+{
+	return alpha_mv.mv_ioportmap(a);
+}
+
+static inline void __iomem *generic_ioremap(unsigned long a, unsigned long s)
+{
+	return alpha_mv.mv_ioremap(a, s);
+}
+
+static inline void generic_iounmap(volatile void __iomem *a)
+{
+	return alpha_mv.mv_iounmap(a);
+}
+
+static inline int generic_is_ioaddr(unsigned long a)
+{
+	return alpha_mv.mv_is_ioaddr(a);
+}
+
+static inline int generic_is_mmio(const volatile void __iomem *a)
+{
+	return alpha_mv.mv_is_mmio(a);
+}
+
+#define __IO_PREFIX		generic
+#define generic_trivial_rw_bw	0
+#define generic_trivial_rw_lq	0
+#define generic_trivial_io_bw	0
+#define generic_trivial_io_lq	0
+#define generic_trivial_iounmap	0
+
+#else
+
+#if defined(CONFIG_ALPHA_APECS)
+# include <asm/core_apecs.h>
+#elif defined(CONFIG_ALPHA_CIA)
+# include <asm/core_cia.h>
+#elif defined(CONFIG_ALPHA_IRONGATE)
+# include <asm/core_irongate.h>
+#elif defined(CONFIG_ALPHA_JENSEN)
+# include <asm/jensen.h>
+#elif defined(CONFIG_ALPHA_LCA)
+# include <asm/core_lca.h>
+#elif defined(CONFIG_ALPHA_MARVEL)
+# include <asm/core_marvel.h>
+#elif defined(CONFIG_ALPHA_MCPCIA)
+# include <asm/core_mcpcia.h>
+#elif defined(CONFIG_ALPHA_POLARIS)
+# include <asm/core_polaris.h>
+#elif defined(CONFIG_ALPHA_T2)
+# include <asm/core_t2.h>
+#elif defined(CONFIG_ALPHA_TSUNAMI)
+# include <asm/core_tsunami.h>
+#elif defined(CONFIG_ALPHA_TITAN)
+# include <asm/core_titan.h>
+#elif defined(CONFIG_ALPHA_WILDFIRE)
+# include <asm/core_wildfire.h>
+#else
+#error "What system is this?"
+#endif
+
+#endif /* GENERIC */
+
+/*
+ * We always have external versions of these routines.
+ */
+extern u8		inb(unsigned long port);
+extern u16		inw(unsigned long port);
+extern u32		inl(unsigned long port);
+extern void		outb(u8 b, unsigned long port);
+extern void		outw(u16 b, unsigned long port);
+extern void		outl(u32 b, unsigned long port);
+
+extern u8		readb(const volatile void __iomem *addr);
+extern u16		readw(const volatile void __iomem *addr);
+extern u32		readl(const volatile void __iomem *addr);
+extern u64		readq(const volatile void __iomem *addr);
+extern void		writeb(u8 b, volatile void __iomem *addr);
+extern void		writew(u16 b, volatile void __iomem *addr);
+extern void		writel(u32 b, volatile void __iomem *addr);
+extern void		writeq(u64 b, volatile void __iomem *addr);
+
+extern u8		__raw_readb(const volatile void __iomem *addr);
+extern u16		__raw_readw(const volatile void __iomem *addr);
+extern u32		__raw_readl(const volatile void __iomem *addr);
+extern u64		__raw_readq(const volatile void __iomem *addr);
+extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
+extern void		__raw_writew(u16 b, volatile void __iomem *addr);
+extern void		__raw_writel(u32 b, volatile void __iomem *addr);
+extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+
+/*
+ * Mapping from port numbers to __iomem space is pretty easy.
+ */
+
+/* These two have to be extern inline because of the extern prototype from
+   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
+   the same declaration.  */
+extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
+}
+
+extern inline void ioport_unmap(void __iomem *addr)
+{
+}
+
+static inline void __iomem *ioremap(unsigned long port, unsigned long size)
+{
+	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
+}
+
+static inline void __iomem *__ioremap(unsigned long port, unsigned long size,
+				      unsigned long flags)
+{
+	return ioremap(port, size);
+}
+
+static inline void __iomem * ioremap_nocache(unsigned long offset,
+					     unsigned long size)
+{
+	return ioremap(offset, size);
+} 
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iounmap)(addr);
+}
+
+static inline int __is_ioaddr(unsigned long addr)
+{
+	return IO_CONCAT(__IO_PREFIX,is_ioaddr)(addr);
+}
+#define __is_ioaddr(a)		__is_ioaddr((unsigned long)(a))
+
+static inline int __is_mmio(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,is_mmio)(addr);
+}
+
+
+/*
+ * If the actual I/O bits are sufficiently trivial, then expand inline.
+ */
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+extern inline unsigned int ioread8(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	mb();
+	return ret;
+}
+
+extern inline unsigned int ioread16(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	mb();
+	return ret;
+}
+
+extern inline void iowrite8(u8 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
+	mb();
+}
+
+extern inline void iowrite16(u16 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
+	mb();
+}
+
+extern inline u8 inb(unsigned long port)
+{
+	return ioread8(ioport_map(port, 1));
+}
+
+extern inline u16 inw(unsigned long port)
+{
+	return ioread16(ioport_map(port, 2));
+}
+
+extern inline void outb(u8 b, unsigned long port)
+{
+	iowrite8(b, ioport_map(port, 1));
+}
+
+extern inline void outw(u16 b, unsigned long port)
+{
+	iowrite16(b, ioport_map(port, 2));
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+extern inline unsigned int ioread32(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	mb();
+	return ret;
+}
+
+extern inline void iowrite32(u32 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
+	mb();
+}
+
+extern inline u32 inl(unsigned long port)
+{
+	return ioread32(ioport_map(port, 4));
+}
+
+extern inline void outl(u32 b, unsigned long port)
+{
+	iowrite32(b, ioport_map(port, 4));
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
+extern inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readb)(addr);
+}
+
+extern inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readw)(addr);
+}
+
+extern inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeb)(b, addr);
+}
+
+extern inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writew)(b, addr);
+}
+
+extern inline u8 readb(const volatile void __iomem *addr)
+{
+	u8 ret = __raw_readb(addr);
+	mb();
+	return ret;
+}
+
+extern inline u16 readw(const volatile void __iomem *addr)
+{
+	u16 ret = __raw_readw(addr);
+	mb();
+	return ret;
+}
+
+extern inline void writeb(u8 b, volatile void __iomem *addr)
+{
+	__raw_writeb(b, addr);
+	mb();
+}
+
+extern inline void writew(u16 b, volatile void __iomem *addr)
+{
+	__raw_writew(b, addr);
+	mb();
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
+extern inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readl)(addr);
+}
+
+extern inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readq)(addr);
+}
+
+extern inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writel)(b, addr);
+}
+
+extern inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeq)(b, addr);
+}
+
+extern inline u32 readl(const volatile void __iomem *addr)
+{
+	u32 ret = __raw_readl(addr);
+	mb();
+	return ret;
+}
+
+extern inline u64 readq(const volatile void __iomem *addr)
+{
+	u64 ret = __raw_readq(addr);
+	mb();
+	return ret;
+}
+
+extern inline void writel(u32 b, volatile void __iomem *addr)
+{
+	__raw_writel(b, addr);
+	mb();
+}
+
+extern inline void writeq(u64 b, volatile void __iomem *addr)
+{
+	__raw_writeq(b, addr);
+	mb();
+}
+#endif
+
+#define inb_p		inb
+#define inw_p		inw
+#define inl_p		inl
+#define outb_p		outb
+#define outw_p		outw
+#define outl_p		outl
+#define readb_relaxed(addr) __raw_readb(addr)
+#define readw_relaxed(addr) __raw_readw(addr)
+#define readl_relaxed(addr) __raw_readl(addr)
+#define readq_relaxed(addr) __raw_readq(addr)
+
+#define mmiowb()
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *, const volatile void __iomem *, long);
+extern void memcpy_toio(volatile void __iomem *, const void *, long);
+extern void _memset_c_io(volatile void __iomem *, unsigned long, long);
+
+static inline void memset_io(volatile void __iomem *addr, u8 c, long len)
+{
+	_memset_c_io(addr, 0x0101010101010101UL * c, len);
+}
+
+#define __HAVE_ARCH_MEMSETW_IO
+static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
+{
+	_memset_c_io(addr, 0x0001000100010001UL * c, len);
+}
+
+/*
+ * String versions of in/out ops:
+ */
+extern void insb (unsigned long port, void *dst, unsigned long count);
+extern void insw (unsigned long port, void *dst, unsigned long count);
+extern void insl (unsigned long port, void *dst, unsigned long count);
+extern void outsb (unsigned long port, const void *src, unsigned long count);
+extern void outsw (unsigned long port, const void *src, unsigned long count);
+extern void outsl (unsigned long port, const void *src, unsigned long count);
+
+/*
+ * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and 
+ * just copy it. The net code will then do the checksum later. Presently 
+ * only used by some shared memory 8390 Ethernet cards anyway.
+ */
+
+#define eth_io_copy_and_sum(skb,src,len,unused) \
+  memcpy_fromio((skb)->data,src,len)
+
+#define isa_eth_io_copy_and_sum(skb,src,len,unused) \
+  isa_memcpy_fromio((skb)->data,src,len)
+
+static inline int
+check_signature(const volatile void __iomem *io_addr,
+		const unsigned char *signature, int length)
+{
+	do {
+		if (readb(io_addr) != *signature)
+			return 0;
+		io_addr++;
+		signature++;
+	} while (--length);
+	return 1;
+}
+
+
+/*
+ * ISA space is mapped to some machine-specific location on Alpha.
+ * Call into the existing hooks to get the address translated.
+ */
+
+static inline u8
+isa_readb(unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 1);
+	u8 ret = readb(addr);
+	iounmap(addr);
+	return ret;
+}
+
+static inline u16
+isa_readw(unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 2);
+	u16 ret = readw(addr);
+	iounmap(addr);
+	return ret;
+}
+
+static inline u32
+isa_readl(unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 2);
+	u32 ret = readl(addr);
+	iounmap(addr);
+	return ret;
+}
+
+static inline void
+isa_writeb(u8 b, unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 2);
+	writeb(b, addr);
+	iounmap(addr);
+}
+
+static inline void
+isa_writew(u16 w, unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 2);
+	writew(w, addr);
+	iounmap(addr);
+}
+
+static inline void
+isa_writel(u32 l, unsigned long offset)
+{
+	void __iomem *addr = ioremap(offset, 2);
+	writel(l, addr);
+	iounmap(addr);
+}
+
+static inline void
+isa_memset_io(unsigned long offset, u8 val, long n)
+{
+	void __iomem *addr = ioremap(offset, n);
+	memset_io(addr, val, n);
+	iounmap(addr);
+}
+
+static inline void
+isa_memcpy_fromio(void *dest, unsigned long offset, long n)
+{
+	void __iomem *addr = ioremap(offset, n);
+	memcpy_fromio(dest, addr, n);
+	iounmap(addr);
+}
+
+static inline void
+isa_memcpy_toio(unsigned long offset, const void *src, long n)
+{
+	void __iomem *addr = ioremap(offset, n);
+	memcpy_toio(addr, src, n);
+	iounmap(addr);
+}
+
+/*
+ * The Alpha Jensen hardware for some rather strange reason puts
+ * the RTC clock at 0x170 instead of 0x70. Probably due to some
+ * misguided idea about using 0x70 for NMI stuff.
+ *
+ * These defines will override the defaults when doing RTC queries
+ */
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
+#else
+# ifdef CONFIG_ALPHA_JENSEN
+#  define RTC_PORT(x)	(0x170+(x))
+# else
+#  define RTC_PORT(x)	(0x70 + (x))
+# endif
+#endif
+#define RTC_ALWAYS_BCD	0
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/*
+ * Some mucking forons use if[n]def writeq to check if platform has it.
+ * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
+ * to play with; for now just use cpp anti-recursion logics and make sure
+ * that damn thing is defined and expands to itself.
+ */
+
+#define writeq writeq
+#define readq readq
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_IO_H */
diff --git a/include/asm-alpha/io_trivial.h b/include/asm-alpha/io_trivial.h
new file mode 100644
index 000000000000..b10d1aa4cdd1
--- /dev/null
+++ b/include/asm-alpha/io_trivial.h
@@ -0,0 +1,127 @@
+/* Trivial implementations of basic i/o routines.  Assumes that all
+   of the hard work has been done by ioremap and ioportmap, and that
+   access to i/o space is linear.  */
+
+/* This file may be included multiple times.  */
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread8)(void __iomem *a)
+{
+	return __kernel_ldbu(*(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread16)(void __iomem *a)
+{
+	return __kernel_ldwu(*(volatile u16 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite8)(u8 b, void __iomem *a)
+{
+	__kernel_stb(b, *(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
+{
+	__kernel_stw(b, *(volatile u16 __force *)a);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread32)(void __iomem *a)
+{
+	return *(volatile u32 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
+{
+	*(volatile u32 __force *)a = b;
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
+__EXTERN_INLINE u8
+IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
+{
+	return __kernel_ldbu(*(const volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE u16
+IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
+{
+	return __kernel_ldwu(*(const volatile u16 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
+{
+	__kernel_stb(b, *(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
+{
+	__kernel_stw(b, *(volatile u16 __force *)a);
+}
+#elif IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 2
+__EXTERN_INLINE u8
+IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
+{
+	return IO_CONCAT(__IO_PREFIX,ioread8)((void __iomem *)a);
+}
+
+__EXTERN_INLINE u16
+IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
+{
+	return IO_CONCAT(__IO_PREFIX,ioread16)((void __iomem *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, (void __iomem *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, (void __iomem *)a);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
+__EXTERN_INLINE u32
+IO_CONCAT(__IO_PREFIX,readl)(const volatile void __iomem *a)
+{
+	return *(const volatile u32 __force *)a;
+}
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,readq)(const volatile void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writel)(u32 b, volatile void __iomem *a)
+{
+	*(volatile u32 __force *)a = b;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeq)(u64 b, volatile void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_iounmap)
+__EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,iounmap)(volatile void __iomem *a)
+{
+}
+#endif
diff --git a/include/asm-alpha/ioctl.h b/include/asm-alpha/ioctl.h
new file mode 100644
index 000000000000..fc63727f4178
--- /dev/null
+++ b/include/asm-alpha/ioctl.h
@@ -0,0 +1,66 @@
+#ifndef _ALPHA_IOCTL_H
+#define _ALPHA_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned.  Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#define _IOC(dir,type,nr,size)			\
+	((unsigned int)				\
+	 (((dir)  << _IOC_DIRSHIFT) |		\
+	  ((type) << _IOC_TYPESHIFT) |		\
+	  ((nr)   << _IOC_NRSHIFT) |		\
+	  ((size) << _IOC_SIZESHIFT)))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ALPHA_IOCTL_H */
diff --git a/include/asm-alpha/ioctls.h b/include/asm-alpha/ioctls.h
new file mode 100644
index 000000000000..67bb9f6fdbe4
--- /dev/null
+++ b/include/asm-alpha/ioctls.h
@@ -0,0 +1,112 @@
+#ifndef _ASM_ALPHA_IOCTLS_H
+#define _ASM_ALPHA_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+# define TIOCM_OUT1	0x2000
+# define TIOCM_OUT2	0x4000
+# define TIOCM_LOOP	0x8000
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+
+#endif /* _ASM_ALPHA_IOCTLS_H */
diff --git a/include/asm-alpha/ipcbuf.h b/include/asm-alpha/ipcbuf.h
new file mode 100644
index 000000000000..d9c0e1a50702
--- /dev/null
+++ b/include/asm-alpha/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ALPHA_IPCBUF_H
+#define _ALPHA_IPCBUF_H
+
+/* 
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ALPHA_IPCBUF_H */
diff --git a/include/asm-alpha/irq.h b/include/asm-alpha/irq.h
new file mode 100644
index 000000000000..566db720000a
--- /dev/null
+++ b/include/asm-alpha/irq.h
@@ -0,0 +1,100 @@
+#ifndef _ALPHA_IRQ_H
+#define _ALPHA_IRQ_H
+
+/*
+ *	linux/include/alpha/irq.h
+ *
+ *	(C) 1994 Linus Torvalds
+ */
+
+#include <linux/linkage.h>
+#include <linux/config.h>
+
+#if   defined(CONFIG_ALPHA_GENERIC)
+
+/* Here NR_IRQS is not exact, but rather an upper bound.  This is used
+   many places throughout the kernel to size static arrays.  That's ok,
+   we'll use alpha_mv.nr_irqs when we want the real thing.  */
+
+/* When LEGACY_START_ADDRESS is selected, we leave out:
+     TITAN
+     WILDFIRE
+     MARVEL
+
+   This helps keep the kernel object size reasonable for the majority
+   of machines.
+*/
+
+# if defined(CONFIG_ALPHA_LEGACY_START_ADDRESS)
+#  define NR_IRQS      (128)           /* max is RAWHIDE/TAKARA */
+# else
+#  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
+# endif
+
+#elif defined(CONFIG_ALPHA_CABRIOLET) || \
+      defined(CONFIG_ALPHA_EB66P)     || \
+      defined(CONFIG_ALPHA_EB164)     || \
+      defined(CONFIG_ALPHA_PC164)     || \
+      defined(CONFIG_ALPHA_LX164)
+# define NR_IRQS	35
+
+#elif defined(CONFIG_ALPHA_EB66)      || \
+      defined(CONFIG_ALPHA_EB64P)     || \
+      defined(CONFIG_ALPHA_MIKASA)
+# define NR_IRQS	32
+
+#elif defined(CONFIG_ALPHA_ALCOR)     || \
+      defined(CONFIG_ALPHA_MIATA)     || \
+      defined(CONFIG_ALPHA_RUFFIAN)   || \
+      defined(CONFIG_ALPHA_RX164)     || \
+      defined(CONFIG_ALPHA_NORITAKE)
+# define NR_IRQS	48
+
+#elif defined(CONFIG_ALPHA_SABLE)     || \
+      defined(CONFIG_ALPHA_SX164)
+# define NR_IRQS	40
+
+#elif defined(CONFIG_ALPHA_DP264) || \
+      defined(CONFIG_ALPHA_LYNX)  || \
+      defined(CONFIG_ALPHA_SHARK) || \
+      defined(CONFIG_ALPHA_EIGER)
+# define NR_IRQS	64
+
+#elif defined(CONFIG_ALPHA_TITAN)
+#define NR_IRQS		80
+
+#elif defined(CONFIG_ALPHA_RAWHIDE) || \
+	defined(CONFIG_ALPHA_TAKARA)
+# define NR_IRQS	128
+
+#elif defined(CONFIG_ALPHA_WILDFIRE)
+# define NR_IRQS	2048 /* enuff for 8 QBBs */
+
+#elif defined(CONFIG_ALPHA_MARVEL)
+# define NR_IRQS	(32768 + 16) 	/* marvel - 32 pids*/
+
+#else /* everyone else */
+# define NR_IRQS	16
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	/*
+	 * XXX is this true for all Alpha's?  The old serial driver
+	 * did it this way for years without any complaints, so....
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+struct pt_regs;
+extern void (*perf_irq)(unsigned long, struct pt_regs *);
+
+struct irqaction;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+
+#endif /* _ALPHA_IRQ_H */
diff --git a/include/asm-alpha/jensen.h b/include/asm-alpha/jensen.h
new file mode 100644
index 000000000000..964b06ead43b
--- /dev/null
+++ b/include/asm-alpha/jensen.h
@@ -0,0 +1,346 @@
+#ifndef __ALPHA_JENSEN_H
+#define __ALPHA_JENSEN_H
+
+#include <asm/compiler.h>
+
+/*
+ * Defines for the AlphaPC EISA IO and memory address space.
+ */
+
+/*
+ * NOTE! The memory operations do not set any memory barriers, as it's
+ * not needed for cases like a frame buffer that is essentially memory-like.
+ * You need to do them by hand if the operations depend on ordering.
+ *
+ * Similarly, the port IO operations do a "mb" only after a write operation:
+ * if an mb is needed before (as in the case of doing memory mapped IO
+ * first, and then a port IO operation to the same device), it needs to be
+ * done by hand.
+ *
+ * After the above has bitten me 100 times, I'll give up and just do the
+ * mb all the time, but right now I'm hoping this will work out.  Avoiding
+ * mb's may potentially be a noticeable speed improvement, but I can't
+ * honestly say I've tested it.
+ *
+ * Handling interrupts that need to do mb's to synchronize to non-interrupts
+ * is another fun race area.  Don't do it (because if you do, I'll have to
+ * do *everything* with interrupts disabled, ugh).
+ */
+
+/*
+ * EISA Interrupt Acknowledge address
+ */
+#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
+
+/*
+ * FEPROM addresses
+ */
+#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
+#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
+
+/*
+ * VL82C106 base address
+ */
+#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
+
+/*
+ * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
+ */
+#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
+
+/*
+ * "SYSCTL" register address
+ */
+#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
+
+/*
+ * "spare" register address
+ */
+#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
+
+/*
+ * EISA memory address offset
+ */
+#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
+
+/*
+ * EISA IO address offset
+ */
+#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * Handle the "host address register". This needs to be set
+ * to the high 7 bits of the EISA address.  This is also needed
+ * for EISA IO addresses, which are only 16 bits wide (the
+ * hae needs to be set to 0).
+ *
+ * HAE isn't needed for the local IO operations, though.
+ */
+
+#define JENSEN_HAE_ADDRESS	EISA_HAE
+#define JENSEN_HAE_MASK		0x1ffffff
+
+__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
+{
+	/* hae on the Jensen is bits 31:25 shifted right */
+	addr >>= 25;
+	if (addr != alpha_mv.hae_cache)
+		set_hae(addr);
+}
+
+#define vuip	volatile unsigned int *
+
+/*
+ * IO functions
+ *
+ * The "local" functions are those that don't go out to the EISA bus,
+ * but instead act on the VL82C106 chip directly.. This is mainly the
+ * keyboard, RTC,  printer and first two serial lines..
+ *
+ * The local stuff makes for some complications, but it seems to be
+ * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
+ * convinced that I need one of the newer machines.
+ */
+
+static inline unsigned int jensen_local_inb(unsigned long addr)
+{
+	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
+}
+
+static inline void jensen_local_outb(u8 b, unsigned long addr)
+{
+	*(vuip)((addr << 9) + EISA_VL82C106) = b;
+	mb();
+}
+
+static inline unsigned int jensen_bus_inb(unsigned long addr)
+{
+	long result;
+
+	jensen_set_hae(0);
+	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+static inline void jensen_bus_outb(u8 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
+	mb();
+}
+
+/*
+ * It seems gcc is not very good at optimizing away logical
+ * operations that result in operations across inline functions.
+ * Which is why this is a macro.
+ */
+
+#define jensen_is_local(addr) ( \
+/* keyboard */	(addr == 0x60 || addr == 0x64) || \
+/* RTC */	(addr == 0x170 || addr == 0x171) || \
+/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
+/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
+/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
+
+__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
+{
+	if (jensen_is_local(addr))
+		return jensen_local_inb(addr);
+	else
+		return jensen_bus_inb(addr);
+}
+
+__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
+{
+	if (jensen_is_local(addr))
+		jensen_local_outb(b, addr);
+	else
+		jensen_bus_outb(b, addr);
+}
+
+__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
+{
+	long result;
+
+	jensen_set_hae(0);
+	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
+	result >>= (addr & 3) * 8;
+	return 0xffffUL & result;
+}
+
+__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
+{
+	jensen_set_hae(0);
+	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
+}
+
+__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
+	mb();
+}
+
+__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
+	mb();
+}
+
+/*
+ * Memory functions.
+ */
+
+__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	long result;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
+	result >>= (addr & 3) * 8;
+	return 0xffUL & result;
+}
+
+__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	long result;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
+	result >>= (addr & 3) * 8;
+	return 0xffffUL & result;
+}
+
+__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
+}
+
+__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long r0, r1;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	addr = (addr << 7) + EISA_MEM + 0x60;
+	r0 = *(vuip) (addr);
+	r1 = *(vuip) (addr + (4 << 7));
+	return r1 << 32 | r0;
+}
+
+__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
+}
+
+__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
+}
+
+__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
+}
+
+__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	addr = (addr << 7) + EISA_MEM + 0x60;
+	*(vuip) (addr) = b;
+	*(vuip) (addr + (4 << 7)) = b >> 32;
+}
+
+__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
+					     unsigned long size)
+{
+	return (void __iomem *)(addr + 0x100000000ul);
+}
+
+__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
+{
+	return (long)addr >= 0;
+}
+
+__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= 0x100000000ul;
+}
+
+/* New-style ioread interface.  All the routines are so ugly for Jensen
+   that it doesn't make sense to merge them.  */
+
+#define IOPORT(OS, NS)							\
+__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr)	\
+{									\
+	if (jensen_is_mmio(xaddr))					\
+		return jensen_read##OS(xaddr - 0x100000000ul);		\
+	else								\
+		return jensen_in##OS((unsigned long)xaddr);		\
+}									\
+__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
+{									\
+	if (jensen_is_mmio(xaddr))					\
+		jensen_write##OS(b, xaddr - 0x100000000ul);		\
+	else								\
+		jensen_out##OS(b, (unsigned long)xaddr);		\
+}
+
+IOPORT(b, 8)
+IOPORT(w, 16)
+IOPORT(l, 32)
+
+#undef IOPORT
+
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		jensen
+#define jensen_trivial_rw_bw	0
+#define jensen_trivial_rw_lq	0
+#define jensen_trivial_io_bw	0
+#define jensen_trivial_io_lq	0
+#define jensen_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_JENSEN_H */
diff --git a/include/asm-alpha/kmap_types.h b/include/asm-alpha/kmap_types.h
new file mode 100644
index 000000000000..3d10cd3ea75f
--- /dev/null
+++ b/include/asm-alpha/kmap_types.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-alpha/linkage.h b/include/asm-alpha/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-alpha/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-alpha/local.h b/include/asm-alpha/local.h
new file mode 100644
index 000000000000..90a510fa358e
--- /dev/null
+++ b/include/asm-alpha/local.h
@@ -0,0 +1,40 @@
+#ifndef _ALPHA_LOCAL_H
+#define _ALPHA_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef atomic64_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC64_INIT(i)
+#define local_read(v)	atomic64_read(v)
+#define local_set(v,i)	atomic64_set(v,i)
+
+#define local_inc(v)	atomic64_inc(v)
+#define local_dec(v)	atomic64_dec(v)
+#define local_add(i, v)	atomic64_add(i, v)
+#define local_sub(i, v)	atomic64_sub(i, v)
+
+#define __local_inc(v)		((v)->counter++)
+#define __local_dec(v)		((v)->counter++)
+#define __local_add(i,v)	((v)->counter+=(i))
+#define __local_sub(i,v)	((v)->counter-=(i))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ALPHA_LOCAL_H */
diff --git a/include/asm-alpha/machvec.h b/include/asm-alpha/machvec.h
new file mode 100644
index 000000000000..ece166a203ec
--- /dev/null
+++ b/include/asm-alpha/machvec.h
@@ -0,0 +1,136 @@
+#ifndef __ALPHA_MACHVEC_H
+#define __ALPHA_MACHVEC_H 1
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/*
+ *	This file gets pulled in by asm/io.h from user space. We don't
+ *	want most of this escaping.
+ */
+ 
+#ifdef __KERNEL__
+
+/* The following structure vectors all of the I/O and IRQ manipulation
+   from the generic kernel to the hardware specific backend.  */
+
+struct task_struct;
+struct mm_struct;
+struct pt_regs;
+struct vm_area_struct;
+struct linux_hose_info;
+struct pci_dev;
+struct pci_ops;
+struct pci_controller;
+struct _alpha_agp_info;
+
+struct alpha_machine_vector
+{
+	/* This "belongs" down below with the rest of the runtime
+	   variables, but it is convenient for entry.S if these 
+	   two slots are at the beginning of the struct.  */
+	unsigned long hae_cache;
+	unsigned long *hae_register;
+
+	int nr_irqs;
+	int rtc_port;
+	unsigned int max_asn;
+	unsigned long max_isa_dma_address;
+	unsigned long irq_probe_mask;
+	unsigned long iack_sc;
+	unsigned long min_io_address;
+	unsigned long min_mem_address;
+	unsigned long pci_dac_offset;
+
+	void (*mv_pci_tbi)(struct pci_controller *hose,
+			   dma_addr_t start, dma_addr_t end);
+
+	unsigned int (*mv_ioread8)(void __iomem *);
+	unsigned int (*mv_ioread16)(void __iomem *);
+	unsigned int (*mv_ioread32)(void __iomem *);
+
+	void (*mv_iowrite8)(u8, void __iomem *);
+	void (*mv_iowrite16)(u16, void __iomem *);
+	void (*mv_iowrite32)(u32, void __iomem *);
+
+	u8 (*mv_readb)(const volatile void __iomem *);
+	u16 (*mv_readw)(const volatile void __iomem *);
+	u32 (*mv_readl)(const volatile void __iomem *);
+	u64 (*mv_readq)(const volatile void __iomem *);
+
+	void (*mv_writeb)(u8, volatile void __iomem *);
+	void (*mv_writew)(u16, volatile void __iomem *);
+	void (*mv_writel)(u32, volatile void __iomem *);
+	void (*mv_writeq)(u64, volatile void __iomem *);
+
+	void __iomem *(*mv_ioportmap)(unsigned long);
+	void __iomem *(*mv_ioremap)(unsigned long, unsigned long);
+	void (*mv_iounmap)(volatile void __iomem *);
+	int (*mv_is_ioaddr)(unsigned long);
+	int (*mv_is_mmio)(const volatile void __iomem *);
+
+	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
+			     struct task_struct *);
+	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
+
+	void (*mv_flush_tlb_current)(struct mm_struct *);
+	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
+					  struct vm_area_struct *vma,
+					  unsigned long addr);
+
+	void (*update_irq_hw)(unsigned long, unsigned long, int);
+	void (*ack_irq)(unsigned long);
+	void (*device_interrupt)(unsigned long vector, struct pt_regs *regs);
+	void (*machine_check)(u64 vector, u64 la, struct pt_regs *regs);
+
+	void (*smp_callin)(void);
+	void (*init_arch)(void);
+	void (*init_irq)(void);
+	void (*init_rtc)(void);
+	void (*init_pci)(void);
+	void (*kill_arch)(int);
+
+	u8 (*pci_swizzle)(struct pci_dev *, u8 *);
+	int (*pci_map_irq)(struct pci_dev *, u8, u8);
+	struct pci_ops *pci_ops;
+
+	struct _alpha_agp_info *(*agp_info)(void);
+
+	const char *vector_name;
+
+	/* NUMA information */
+	int (*pa_to_nid)(unsigned long);
+	int (*cpuid_to_nid)(int);
+	unsigned long (*node_mem_start)(int);
+	unsigned long (*node_mem_size)(int);
+
+	/* System specific parameters.  */
+	union {
+	    struct {
+		unsigned long gru_int_req_bits;
+	    } cia;
+
+	    struct {
+		unsigned long gamma_bias;
+	    } t2;
+
+	    struct {
+		unsigned int route_tab;
+	    } sio;
+	} sys;
+};
+
+extern struct alpha_machine_vector alpha_mv;
+
+#ifdef CONFIG_ALPHA_GENERIC
+extern int alpha_using_srm;
+#else
+#ifdef CONFIG_ALPHA_SRM
+#define alpha_using_srm 1
+#else
+#define alpha_using_srm 0
+#endif
+#endif /* GENERIC */
+
+#endif
+#endif /* __ALPHA_MACHVEC_H */
diff --git a/include/asm-alpha/mc146818rtc.h b/include/asm-alpha/mc146818rtc.h
new file mode 100644
index 000000000000..097703f1c8cb
--- /dev/null
+++ b/include/asm-alpha/mc146818rtc.h
@@ -0,0 +1,27 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_ALPHA_MC146818RTC_H
+#define __ASM_ALPHA_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* __ASM_ALPHA_MC146818RTC_H */
diff --git a/include/asm-alpha/md.h b/include/asm-alpha/md.h
new file mode 100644
index 000000000000..6c9b8222a4f2
--- /dev/null
+++ b/include/asm-alpha/md.h
@@ -0,0 +1,13 @@
+/* $Id: md.h,v 1.1 1997/12/15 15:11:48 jj Exp $
+ * md.h: High speed xor_block operation for RAID4/5 
+ *
+ */
+ 
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/include/asm-alpha/mman.h b/include/asm-alpha/mman.h
new file mode 100644
index 000000000000..eb9c279045ef
--- /dev/null
+++ b/include/asm-alpha/mman.h
@@ -0,0 +1,50 @@
+#ifndef __ALPHA_MMAN_H__
+#define __ALPHA_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping (OSF/1 is _wrong_) */
+#define MAP_FIXED	0x100		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x10		/* don't use a file */
+
+/* not used by linux, but here to make sure we don't clash with OSF/1 defines */
+#define _MAP_HASSEMAPHORE 0x0200
+#define _MAP_INHERIT	0x0400
+#define _MAP_UNALIGNED	0x0800
+
+/* These are linux-specific */
+#define MAP_GROWSDOWN	0x01000		/* stack-like segment */
+#define MAP_DENYWRITE	0x02000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x04000		/* mark it as an executable */
+#define MAP_LOCKED	0x08000		/* lock the mapping */
+#define MAP_NORESERVE	0x10000		/* don't check for reservations */
+#define MAP_POPULATE	0x20000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x40000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_SYNC		2		/* synchronous memory sync */
+#define MS_INVALIDATE	4		/* invalidate the caches */
+
+#define MCL_CURRENT	 8192		/* lock all currently mapped pages */
+#define MCL_FUTURE	16384		/* lock all additions to address space */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define	MADV_SPACEAVAIL	5		/* ensure resources are available */
+#define MADV_DONTNEED	6		/* don't need these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __ALPHA_MMAN_H__ */
diff --git a/include/asm-alpha/mmu.h b/include/asm-alpha/mmu.h
new file mode 100644
index 000000000000..3dc127779329
--- /dev/null
+++ b/include/asm-alpha/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __ALPHA_MMU_H
+#define __ALPHA_MMU_H
+
+/* The alpha MMU context is one "unsigned long" bitmap per CPU */
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif
diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h
new file mode 100644
index 000000000000..a714d0cdc204
--- /dev/null
+++ b/include/asm-alpha/mmu_context.h
@@ -0,0 +1,261 @@
+#ifndef __ALPHA_MMU_CONTEXT_H
+#define __ALPHA_MMU_CONTEXT_H
+
+/*
+ * get a new mmu context..
+ *
+ * Copyright (C) 1996, Linus Torvalds
+ */
+
+#include <linux/config.h>
+#include <asm/system.h>
+#include <asm/machvec.h>
+#include <asm/compiler.h>
+
+/*
+ * Force a context reload. This is needed when we change the page
+ * table pointer or when we update the ASN of the current process.
+ */
+
+/* Don't get into trouble with dueling __EXTERN_INLINEs.  */
+#ifndef __EXTERN_INLINE
+#include <asm/io.h>
+#endif
+
+
+extern inline unsigned long
+__reload_thread(struct pcb_struct *pcb)
+{
+	register unsigned long a0 __asm__("$16");
+	register unsigned long v0 __asm__("$0");
+
+	a0 = virt_to_phys(pcb);
+	__asm__ __volatile__(
+		"call_pal %2 #__reload_thread"
+		: "=r"(v0), "=r"(a0)
+		: "i"(PAL_swpctx), "r"(a0)
+		: "$1", "$22", "$23", "$24", "$25");
+
+	return v0;
+}
+
+
+/*
+ * The maximum ASN's the processor supports.  On the EV4 this is 63
+ * but the PAL-code doesn't actually use this information.  On the
+ * EV5 this is 127, and EV6 has 255.
+ *
+ * On the EV4, the ASNs are more-or-less useless anyway, as they are
+ * only used as an icache tag, not for TB entries.  On the EV5 and EV6,
+ * ASN's also validate the TB entries, and thus make a lot more sense.
+ *
+ * The EV4 ASN's don't even match the architecture manual, ugh.  And
+ * I quote: "If a processor implements address space numbers (ASNs),
+ * and the old PTE has the Address Space Match (ASM) bit clear (ASNs
+ * in use) and the Valid bit set, then entries can also effectively be
+ * made coherent by assigning a new, unused ASN to the currently
+ * running process and not reusing the previous ASN before calling the
+ * appropriate PALcode routine to invalidate the translation buffer (TB)". 
+ *
+ * In short, the EV4 has a "kind of" ASN capability, but it doesn't actually
+ * work correctly and can thus not be used (explaining the lack of PAL-code
+ * support).
+ */
+#define EV4_MAX_ASN 63
+#define EV5_MAX_ASN 127
+#define EV6_MAX_ASN 255
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define MAX_ASN	(alpha_mv.max_asn)
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define MAX_ASN	EV4_MAX_ASN
+# elif defined(CONFIG_ALPHA_EV5)
+#  define MAX_ASN	EV5_MAX_ASN
+# else
+#  define MAX_ASN	EV6_MAX_ASN
+# endif
+#endif
+
+/*
+ * cpu_last_asn(processor):
+ * 63                                            0
+ * +-------------+----------------+--------------+
+ * | asn version | this processor | hardware asn |
+ * +-------------+----------------+--------------+
+ */
+
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#define cpu_last_asn(cpuid)	(cpu_data[cpuid].last_asn)
+#else
+extern unsigned long last_asn;
+#define cpu_last_asn(cpuid)	last_asn
+#endif /* CONFIG_SMP */
+
+#define WIDTH_HARDWARE_ASN	8
+#define ASN_FIRST_VERSION (1UL << WIDTH_HARDWARE_ASN)
+#define HARDWARE_ASN_MASK ((1UL << WIDTH_HARDWARE_ASN) - 1)
+
+/*
+ * NOTE! The way this is set up, the high bits of the "asn_cache" (and
+ * the "mm->context") are the ASN _version_ code. A version of 0 is
+ * always considered invalid, so to invalidate another process you only
+ * need to do "p->mm->context = 0".
+ *
+ * If we need more ASN's than the processor has, we invalidate the old
+ * user TLB's (tbiap()) and start a new ASN version. That will automatically
+ * force a new asn for any other processes the next time they want to
+ * run.
+ */
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __MMU_EXTERN_INLINE
+#endif
+
+static inline unsigned long
+__get_new_mm_context(struct mm_struct *mm, long cpu)
+{
+	unsigned long asn = cpu_last_asn(cpu);
+	unsigned long next = asn + 1;
+
+	if ((asn & HARDWARE_ASN_MASK) >= MAX_ASN) {
+		tbiap();
+		imb();
+		next = (asn & ~HARDWARE_ASN_MASK) + ASN_FIRST_VERSION;
+	}
+	cpu_last_asn(cpu) = next;
+	return next;
+}
+
+__EXTERN_INLINE void
+ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+	      struct task_struct *next)
+{
+	/* Check if our ASN is of an older version, and thus invalid. */
+	unsigned long asn;
+	unsigned long mmc;
+	long cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	cpu_data[cpu].asn_lock = 1;
+	barrier();
+#endif
+	asn = cpu_last_asn(cpu);
+	mmc = next_mm->context[cpu];
+	if ((mmc ^ asn) & ~HARDWARE_ASN_MASK) {
+		mmc = __get_new_mm_context(next_mm, cpu);
+		next_mm->context[cpu] = mmc;
+	}
+#ifdef CONFIG_SMP
+	else
+		cpu_data[cpu].need_new_asn = 1;
+#endif
+
+	/* Always update the PCB ASN.  Another thread may have allocated
+	   a new mm->context (via flush_tlb_mm) without the ASN serial
+	   number wrapping.  We have no way to detect when this is needed.  */
+	next->thread_info->pcb.asn = mmc & HARDWARE_ASN_MASK;
+}
+
+__EXTERN_INLINE void
+ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+	      struct task_struct *next)
+{
+	/* As described, ASN's are broken for TLB usage.  But we can
+	   optimize for switching between threads -- if the mm is
+	   unchanged from current we needn't flush.  */
+	/* ??? May not be needed because EV4 PALcode recognizes that
+	   ASN's are broken and does a tbiap itself on swpctx, under
+	   the "Must set ASN or flush" rule.  At least this is true
+	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
+	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
+	if (prev_mm != next_mm)
+		tbiap();
+
+	/* Do continue to allocate ASNs, because we can still use them
+	   to avoid flushing the icache.  */
+	ev5_switch_mm(prev_mm, next_mm, next);
+}
+
+extern void __load_new_mm_context(struct mm_struct *);
+
+#ifdef CONFIG_SMP
+#define check_mmu_context()					\
+do {								\
+	int cpu = smp_processor_id();				\
+	cpu_data[cpu].asn_lock = 0;				\
+	barrier();						\
+	if (cpu_data[cpu].need_new_asn) {			\
+		struct mm_struct * mm = current->active_mm;	\
+		cpu_data[cpu].need_new_asn = 0;			\
+		if (!mm->context[cpu])			\
+			__load_new_mm_context(mm);		\
+	}							\
+} while(0)
+#else
+#define check_mmu_context()  do { } while(0)
+#endif
+
+__EXTERN_INLINE void
+ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+	__load_new_mm_context(next_mm);
+}
+
+__EXTERN_INLINE void
+ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+	__load_new_mm_context(next_mm);
+	tbiap();
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
+# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
+#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
+# else
+#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
+# endif
+#endif
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_online(i))
+			mm->context[i] = 0;
+	if (tsk != current)
+		tsk->thread_info->pcb.ptbr
+		  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
+	return 0;
+}
+
+extern inline void
+destroy_context(struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	tsk->thread_info->pcb.ptbr
+	  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
+}
+
+#ifdef __MMU_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __MMU_EXTERN_INLINE
+#endif
+
+#endif /* __ALPHA_MMU_CONTEXT_H */
diff --git a/include/asm-alpha/mmzone.h b/include/asm-alpha/mmzone.h
new file mode 100644
index 000000000000..726c150dcbe4
--- /dev/null
+++ b/include/asm-alpha/mmzone.h
@@ -0,0 +1,131 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Adapted for the alpha wildfire architecture Jan 2001.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <linux/config.h>
+#include <asm/smp.h>
+
+struct bootmem_data_t; /* stupid forward decl. */
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+
+extern pg_data_t node_data[];
+
+#define alpha_pa_to_nid(pa)		\
+        (alpha_mv.pa_to_nid 		\
+	 ? alpha_mv.pa_to_nid(pa)	\
+	 : (0))
+#define node_mem_start(nid)		\
+        (alpha_mv.node_mem_start 	\
+	 ? alpha_mv.node_mem_start(nid) \
+	 : (0UL))
+#define node_mem_size(nid)		\
+        (alpha_mv.node_mem_size 	\
+	 ? alpha_mv.node_mem_size(nid) 	\
+	 : ((nid) ? (0UL) : (~0UL)))
+
+#define pa_to_nid(pa)		alpha_pa_to_nid(pa)
+#define NODE_DATA(nid)		(&node_data[(nid)])
+
+#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
+
+#if 1
+#define PLAT_NODE_DATA_LOCALNR(p, n)	\
+	(((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn)
+#else
+static inline unsigned long
+PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
+{
+	unsigned long temp;
+	temp = p >> PAGE_SHIFT;
+	return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn;
+}
+#endif
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Following are macros that each numa implementation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+
+#define local_mapnr(kvaddr) \
+      ((__pa(kvaddr) >> PAGE_SHIFT) - node_start_pfn(kvaddr_to_nid(kvaddr)))
+
+/*
+ * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
+ * and returns the kaddr corresponding to first physical page in the
+ * node's mem_map.
+ */
+#define LOCAL_BASE_ADDR(kaddr)						  \
+    ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn  \
+			 << PAGE_SHIFT))
+
+/* XXX: FIXME -- wli */
+#define kern_addr_valid(kaddr)	(0)
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VALID_PAGE(page)	(((page) - mem_map) < max_mapnr)
+
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> 32))
+#define pte_pfn(pte)		(pte_val(pte) >> 32)
+
+#define mk_pte(page, pgprot)						     \
+({								 	     \
+	pte_t pte;                                                           \
+	unsigned long pfn;                                                   \
+									     \
+	pfn = ((unsigned long)((page)-page_zone(page)->zone_mem_map)) << 32; \
+	pfn += page_zone(page)->zone_start_pfn << 32;			     \
+	pte_val(pte) = pfn | pgprot_val(pgprot);			     \
+									     \
+	pte;								     \
+})
+
+#define pte_page(x)							\
+({									\
+       	unsigned long kvirt;						\
+	struct page * __xx;						\
+									\
+	kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT));	\
+	__xx = virt_to_page(kvirt);					\
+									\
+	__xx;                                                           \
+})
+
+#define pfn_to_page(pfn)						\
+({									\
+ 	unsigned long kaddr = (unsigned long)__va((pfn) << PAGE_SHIFT);	\
+	(node_mem_map(kvaddr_to_nid(kaddr)) + local_mapnr(kaddr));	\
+})
+
+#define page_to_pfn(page)						\
+	((page) - page_zone(page)->zone_mem_map +			\
+	 (page_zone(page)->zone_start_pfn))
+
+#define page_to_pa(page)						\
+	((( (page) - page_zone(page)->zone_mem_map )			\
+	+ page_zone(page)->zone_start_pfn) << PAGE_SHIFT)
+
+#define pfn_to_nid(pfn)		pa_to_nid(((u64)(pfn) << PAGE_SHIFT))
+#define pfn_valid(pfn)							\
+	(((pfn) - node_start_pfn(pfn_to_nid(pfn))) <			\
+	 node_spanned_pages(pfn_to_nid(pfn)))					\
+
+#define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-alpha/module.h b/include/asm-alpha/module.h
new file mode 100644
index 000000000000..7b63743c534a
--- /dev/null
+++ b/include/asm-alpha/module.h
@@ -0,0 +1,23 @@
+#ifndef _ALPHA_MODULE_H
+#define _ALPHA_MODULE_H
+
+struct mod_arch_specific
+{
+	unsigned int gotsecindex;
+};
+
+#define Elf_Sym Elf64_Sym
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Phdr Elf64_Phdr
+#define Elf_Dyn Elf64_Dyn
+#define Elf_Rel Elf64_Rel
+#define Elf_Rela Elf64_Rela
+
+#define ARCH_SHF_SMALL SHF_ALPHA_GPREL
+
+#ifdef MODULE
+asm(".section .got,\"aws\",@progbits; .align 3; .previous");
+#endif
+
+#endif /*_ALPHA_MODULE_H*/
diff --git a/include/asm-alpha/msgbuf.h b/include/asm-alpha/msgbuf.h
new file mode 100644
index 000000000000..98496501a2bb
--- /dev/null
+++ b/include/asm-alpha/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ALPHA_MSGBUF_H
+#define _ALPHA_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ALPHA_MSGBUF_H */
diff --git a/include/asm-alpha/namei.h b/include/asm-alpha/namei.h
new file mode 100644
index 000000000000..5cc9bb39499d
--- /dev/null
+++ b/include/asm-alpha/namei.h
@@ -0,0 +1,17 @@
+/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
+ * linux/include/asm-alpha/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ALPHA_NAMEI_H
+#define __ALPHA_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __ALPHA_NAMEI_H */
diff --git a/include/asm-alpha/numnodes.h b/include/asm-alpha/numnodes.h
new file mode 100644
index 000000000000..cd425827e4f3
--- /dev/null
+++ b/include/asm-alpha/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+/* Max 128 Nodes - Marvel */
+#define NODES_SHIFT	7
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-alpha/page.h b/include/asm-alpha/page.h
new file mode 100644
index 000000000000..0577daffc720
--- /dev/null
+++ b/include/asm-alpha/page.h
@@ -0,0 +1,115 @@
+#ifndef _ALPHA_PAGE_H
+#define _ALPHA_PAGE_H
+
+#include <linux/config.h>
+#include <asm/pal.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	13
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define STRICT_MM_TYPECHECKS
+
+extern void clear_page(void *page);
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vmaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+extern void copy_page(void * _to, void * _from);
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#ifdef USE_48_BIT_KSEG
+#define PAGE_OFFSET		0xffff800000000000UL
+#else
+#define PAGE_OFFSET		0xfffffc0000000000UL
+#endif
+
+#else
+
+#ifdef USE_48_BIT_KSEG
+#define PAGE_OFFSET		0xffff800000000000
+#else
+#define PAGE_OFFSET		0xfffffc0000000000
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE | VM_EXEC | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ALPHA_PAGE_H */
diff --git a/include/asm-alpha/pal.h b/include/asm-alpha/pal.h
new file mode 100644
index 000000000000..9b4ba0d6f00b
--- /dev/null
+++ b/include/asm-alpha/pal.h
@@ -0,0 +1,51 @@
+#ifndef __ALPHA_PAL_H
+#define __ALPHA_PAL_H
+
+/*
+ * Common PAL-code
+ */
+#define PAL_halt	  0
+#define PAL_cflush	  1
+#define PAL_draina	  2
+#define PAL_bpt		128
+#define PAL_bugchk	129
+#define PAL_chmk	131
+#define PAL_callsys	131
+#define PAL_imb		134
+#define PAL_rduniq	158
+#define PAL_wruniq	159
+#define PAL_gentrap	170
+#define PAL_nphalt	190
+
+/*
+ * VMS specific PAL-code
+ */
+#define PAL_swppal	10
+#define PAL_mfpr_vptb	41
+
+/*
+ * OSF specific PAL-code
+ */
+#define PAL_cserve	 9
+#define PAL_wripir	13
+#define PAL_rdmces	16
+#define PAL_wrmces	17
+#define PAL_wrfen	43
+#define PAL_wrvptptr	45
+#define PAL_jtopal	46
+#define PAL_swpctx	48
+#define PAL_wrval	49
+#define PAL_rdval	50
+#define PAL_tbi		51
+#define PAL_wrent	52
+#define PAL_swpipl	53
+#define PAL_rdps	54
+#define PAL_wrkgp	55
+#define PAL_wrusp	56
+#define PAL_wrperfmon	57
+#define PAL_rdusp	58
+#define PAL_whami	60
+#define PAL_retsys	61
+#define PAL_rti		63
+
+#endif /* __ALPHA_PAL_H */
diff --git a/include/asm-alpha/param.h b/include/asm-alpha/param.h
new file mode 100644
index 000000000000..3ed0b3b02e52
--- /dev/null
+++ b/include/asm-alpha/param.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_ALPHA_PARAM_H
+#define _ASM_ALPHA_PARAM_H
+
+/* ??? Gross.  I don't want to parameterize this, and supposedly the
+   hardware ignores reprogramming.  We also need userland buy-in to the 
+   change in HZ, since this is visible in the wait4 resources etc.  */
+
+#include <linux/config.h>
+
+#ifndef HZ
+# ifndef CONFIG_ALPHA_RAWHIDE
+#  define HZ	1024
+# else
+#  define HZ	1200
+# endif
+#endif
+
+#define USER_HZ		HZ
+
+#define EXEC_PAGESIZE	8192
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#endif
+
+#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/include/asm-alpha/parport.h b/include/asm-alpha/parport.h
new file mode 100644
index 000000000000..c5ee7cbb2fcd
--- /dev/null
+++ b/include/asm-alpha/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_AXP_PARPORT_H
+#define _ASM_AXP_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_AXP_PARPORT_H) */
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
new file mode 100644
index 000000000000..0c7b57bc043a
--- /dev/null
+++ b/include/asm-alpha/pci.h
@@ -0,0 +1,261 @@
+#ifndef __ALPHA_PCI_H
+#define __ALPHA_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/scatterlist.h>
+#include <asm/machvec.h>
+
+/*
+ * The following structure is used to manage multiple PCI busses.
+ */
+
+struct pci_dev;
+struct pci_bus;
+struct resource;
+struct pci_iommu_arena;
+struct page;
+
+/* A controller.  Used to manage multiple PCI busses.  */
+
+struct pci_controller {
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	struct resource *io_space;
+	struct resource *mem_space;
+
+	/* The following are for reporting to userland.  The invariant is
+	   that if we report a BWX-capable dense memory, we do not report
+	   a sparse memory at all, even if it exists.  */
+	unsigned long sparse_mem_base;
+	unsigned long dense_mem_base;
+	unsigned long sparse_io_base;
+	unsigned long dense_io_base;
+
+	/* This one's for the kernel only.  It's in KSEG somewhere.  */
+	unsigned long config_space_base;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	struct pci_iommu_arena *sg_pci;
+	struct pci_iommu_arena *sg_isa;
+
+	void *sysdata;
+};
+
+/* Override the logic in pci_scan_bus for skipping already-configured
+   bus numbers.  */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		alpha_mv.min_io_address
+#define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* IOMMU controls.  */
+
+/* The PCI address space does not equal the physical memory address space.
+   The networking and block device layers use this boolean for bounce buffer
+   decisions.  */
+#define PCI_DMA_BUS_IS_PHYS  0
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDRP to the pci side dma address as well,
+   else DMA_ADDRP is undefined.  */
+
+extern void *pci_alloc_consistent(struct pci_dev *, size_t, dma_addr_t *);
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must
+   be the same as what as passed into pci_alloc_consistent.
+   References to the memory and mappings associated with CPU_ADDR or
+   DMA_ADDR past this call are illegal.  */
+
+extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
+
+/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
+   The 32-bit PCI bus mastering address to use is returned.  Once the device
+   is given the dma address, the device owns this memory until either
+   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
+
+extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
+
+/* Likewise, but for a page instead of an address.  */
+extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
+			       unsigned long, size_t, int);
+
+/* Test for pci_map_single or pci_map_page having generated an error.  */
+
+static inline int
+pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
+   SIZE must match what was provided for in a previous pci_map_single
+   call.  All other usages are undefined.  After this call, reads by
+   the cpu to the buffer are guaranteed to see whatever the device
+   wrote there.  */
+
+extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
+extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* Map a set of buffers described by scatterlist in streaming mode for
+   PCI DMA.  This is the scatter-gather version of the above
+   pci_map_single interface.  Here the scatter gather list elements
+   are each tagged with the appropriate PCI dma address and length.
+   They are obtained via sg_dma_{address,length}(SG).
+
+   NOTE: An implementation may be able to use a smaller number of DMA
+   address/length pairs than there are SG table elements.  (for
+   example via virtual mapping capabilities) The routine returns the
+   number of addr/length pairs actually used, at most nents.
+
+   Device ownership issues as mentioned above for pci_map_single are
+   the same here.  */
+
+extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Unmap a set of streaming mode DMA translations.  Again, cpu read
+   rules concerning calls here are the same as for pci_unmap_single()
+   above.  */
+
+extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Make physical memory consistent for a single streaming mode DMA
+   translation after a transfer and device currently has ownership
+   of the buffer.
+
+   If you perform a pci_map_single() but wish to interrogate the
+   buffer using the cpu, yet do not wish to teardown the PCI dma
+   mapping, you must call this function before doing so.  At the next
+   point you give the PCI dma address back to the card, you must first
+   perform a pci_dma_sync_for_device, and then the device again owns
+   the buffer.  */
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
+			    long size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
+			       size_t size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Make physical memory consistent for a set of streaming mode DMA
+   translations after a transfer.  The same as pci_dma_sync_single_*
+   but for a scatter-gather list, same rules and usage.  */
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
+			int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
+			   int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+   be supported properly.  For example, if your device can
+   only drive the low 24-bits during PCI bus mastering, then
+   you would pass 0x00ffffff as the mask to this function.  */
+
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* True if the machine supports DAC addressing, and DEV can
+   make use of it given MASK.  */
+extern int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* Convert to/from DAC dma address and struct page.  */
+extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *, struct page *,
+					unsigned long, int);
+extern struct page *pci_dac_dma_to_page(struct pci_dev *, dma64_addr_t);
+extern unsigned long pci_dac_dma_to_offset(struct pci_dev *, dma64_addr_t);
+
+static inline void
+pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr,
+				size_t len, int direction)
+{
+	/* Nothing to do. */
+}
+
+static inline void
+pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr,
+				   size_t len, int direction)
+{
+	/* Nothing to do. */
+}
+
+/* TODO: integrate with include/asm-generic/pci.h ? */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *,
+				    struct resource *);
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+static inline void
+pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+struct pci_dev *alpha_gendev_to_pci(struct device *dev);
+
+#endif /* __KERNEL__ */
+
+/* Values for the `which' argument to sys_pciconfig_iobase.  */
+#define IOBASE_HOSE		0
+#define IOBASE_SPARSE_MEM	1
+#define IOBASE_DENSE_MEM	2
+#define IOBASE_SPARSE_IO	3
+#define IOBASE_DENSE_IO		4
+#define IOBASE_ROOT_BUS		5
+#define IOBASE_FROM_HOSE	0x10000
+
+#endif /* __ALPHA_PCI_H */
diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h
new file mode 100644
index 000000000000..48348fe34c19
--- /dev/null
+++ b/include/asm-alpha/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_PERCPU_H
+#define __ALPHA_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ALPHA_PERCPU_H */
diff --git a/include/asm-alpha/pgalloc.h b/include/asm-alpha/pgalloc.h
new file mode 100644
index 000000000000..308475642913
--- /dev/null
+++ b/include/asm-alpha/pgalloc.h
@@ -0,0 +1,78 @@
+#ifndef _ALPHA_PGALLOC_H
+#define _ALPHA_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+
+/*      
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+	pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
+}
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	pmd_set(pmd, pte);
+}
+
+static inline void
+pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	pgd_set(pgd, pmd);
+}
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+
+static inline void
+pgd_free(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+static inline pmd_t *
+pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return ret;
+}
+
+static inline void
+pmd_free(pmd_t *pmd)
+{
+	free_page((unsigned long)pmd);
+}
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+
+static inline void
+pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline struct page *
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = pte_alloc_one_kernel(mm, addr);
+	if (pte)
+		return virt_to_page(pte);
+	return NULL;
+}
+
+static inline void
+pte_free(struct page *page)
+{
+	__free_page(page);
+}
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ALPHA_PGALLOC_H */
diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
new file mode 100644
index 000000000000..faae196d8377
--- /dev/null
+++ b/include/asm-alpha/pgtable.h
@@ -0,0 +1,369 @@
+#ifndef _ALPHA_PGTABLE_H
+#define _ALPHA_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the Alpha page table tree.
+ *
+ * This hopefully works with any standard Alpha page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ */
+#include <linux/config.h>
+#include <linux/mmzone.h>
+
+#include <asm/page.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/machvec.h>
+
+/* Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level:  the Alpha is three-level, with
+ * all levels having a one-page page table.
+ */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-3))
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+/* Number of pointers that fit on a page:  this will go away. */
+#define PTRS_PER_PAGE	(1UL << (PAGE_SHIFT-3))
+
+#ifdef CONFIG_ALPHA_LARGE_VMALLOC
+#define VMALLOC_START		0xfffffe0000000000
+#else
+#define VMALLOC_START		(-2*PGDIR_SIZE)
+#endif
+#define VMALLOC_END		(-PGDIR_SIZE)
+
+/*
+ * OSF/1 PAL-code-imposed page table bits
+ */
+#define _PAGE_VALID	0x0001
+#define _PAGE_FOR	0x0002	/* used for page protection (fault on read) */
+#define _PAGE_FOW	0x0004	/* used for page protection (fault on write) */
+#define _PAGE_FOE	0x0008	/* used for page protection (fault on exec) */
+#define _PAGE_ASM	0x0010
+#define _PAGE_KRE	0x0100	/* xxx - see below on the "accessed" bit */
+#define _PAGE_URE	0x0200	/* xxx */
+#define _PAGE_KWE	0x1000	/* used to do the dirty bit in software */
+#define _PAGE_UWE	0x2000	/* used to do the dirty bit in software */
+
+/* .. and these are ours ... */
+#define _PAGE_DIRTY	0x20000
+#define _PAGE_ACCESSED	0x40000
+#define _PAGE_FILE	0x80000	/* set:pagecache, unset:swap */
+
+/*
+ * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
+ * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
+ * Under Linux/AXP, the "accessed" bit just means "read", and I'll just use
+ * the KRE/URE bits to watch for it. That way we don't need to overload the
+ * KWE/UWE bits with both handling dirty and accessed.
+ *
+ * Note that the kernel uses the accessed bit just to check whether to page
+ * out a page or not, so it doesn't have to be exact anyway.
+ */
+
+#define __DIRTY_BITS	(_PAGE_DIRTY | _PAGE_KWE | _PAGE_UWE)
+#define __ACCESS_BITS	(_PAGE_ACCESSED | _PAGE_KRE | _PAGE_URE)
+
+#define _PFN_MASK	0xFFFFFFFF00000000UL
+
+#define _PAGE_TABLE	(_PAGE_VALID | __DIRTY_BITS | __ACCESS_BITS)
+#define _PAGE_CHG_MASK	(_PFN_MASK | __DIRTY_BITS | __ACCESS_BITS)
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time they are used,
+ * the page is accessed. They are cleared only by the page-out routines
+ */
+#define PAGE_NONE	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOR | _PAGE_FOW | _PAGE_FOE)
+#define PAGE_SHARED	__pgprot(_PAGE_VALID | __ACCESS_BITS)
+#define PAGE_COPY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
+#define PAGE_READONLY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
+#define PAGE_KERNEL	__pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE | _PAGE_KWE)
+
+#define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
+
+#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_S(x) _PAGE_NORMAL(x)
+
+/*
+ * The hardware can handle write-only mappings, but as the Alpha
+ * architecture does byte-wide writes with a read-modify-write
+ * sequence, it's not practical to have write-without-read privs.
+ * Thus the "-w- -> rw-" and "-wx -> rwx" mapping here (and in
+ * arch/alpha/mm/fault.c)
+ */
+	/* xwr */
+#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
+#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
+#define __P010	_PAGE_P(_PAGE_FOE)
+#define __P011	_PAGE_P(_PAGE_FOE)
+#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
+#define __P101	_PAGE_P(_PAGE_FOW)
+#define __P110	_PAGE_P(0)
+#define __P111	_PAGE_P(0)
+
+#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
+#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
+#define __S010	_PAGE_S(_PAGE_FOE)
+#define __S011	_PAGE_S(_PAGE_FOE)
+#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
+#define __S101	_PAGE_S(_PAGE_FOW)
+#define __S110	_PAGE_S(0)
+#define __S111	_PAGE_S(0)
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero:  used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t __bad_page(void);
+extern pmd_t * __bad_pagetable(void);
+
+extern unsigned long __zero_page(void);
+
+#define BAD_PAGETABLE	__bad_pagetable()
+#define BAD_PAGE	__bad_page()
+#define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+#define SIZEOF_PTR_LOG2			3
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address)		\
+  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+/*
+ * On certain platforms whose physical address space can overlap KSEG,
+ * namely EV6 and above, we must re-twiddle the physaddr to restore the
+ * correct high-order bits.
+ *
+ * This is extremely confusing until you realize that this is actually
+ * just working around a userspace bug.  The X server was intending to
+ * provide the physical address but instead provided the KSEG address.
+ * Or tried to, except it's not representable.
+ * 
+ * On Tsunami there's nothing meaningful at 0x40000000000, so this is
+ * a safe thing to do.  Come the first core logic that does put something
+ * in this area -- memory or whathaveyou -- then this hack will have
+ * to go away.  So be prepared!
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) && defined(USE_48_BIT_KSEG)
+#error "EV6-only feature in a generic kernel"
+#endif
+#if defined(CONFIG_ALPHA_GENERIC) || \
+    (defined(CONFIG_ALPHA_EV6) && !defined(USE_48_BIT_KSEG))
+#define KSEG_PFN	(0xc0000000000UL >> PAGE_SHIFT)
+#define PHYS_TWIDDLE(pfn) \
+  ((((pfn) & KSEG_PFN) == (0x40000000000UL >> PAGE_SHIFT)) \
+  ? ((pfn) ^= KSEG_PFN) : (pfn))
+#else
+#define PHYS_TWIDDLE(pfn) (pfn)
+#endif
+
+/*
+ * Conversion functions:  convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#ifndef CONFIG_DISCONTIGMEM
+#define page_to_pa(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+#define pte_pfn(pte)	(pte_val(pte) >> 32)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+#define mk_pte(page, pgprot)						\
+({									\
+	pte_t pte;							\
+									\
+	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
+	pte;								\
+})
+#endif
+
+extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
+{ pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
+
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+
+extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+{ pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
+
+extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp)
+{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
+
+
+extern inline unsigned long
+pmd_page_kernel(pmd_t pmd)
+{
+	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)	(mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32))
+#endif
+
+extern inline unsigned long pgd_page(pgd_t pgd)
+{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); }
+
+extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
+extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_val(*ptep) = 0;
+}
+
+extern inline int pmd_none(pmd_t pmd)		{ return !pmd_val(pmd); }
+extern inline int pmd_bad(pmd_t pmd)		{ return (pmd_val(pmd) & ~_PFN_MASK) != _PAGE_TABLE; }
+extern inline int pmd_present(pmd_t pmd)	{ return pmd_val(pmd) & _PAGE_VALID; }
+extern inline void pmd_clear(pmd_t * pmdp)	{ pmd_val(*pmdp) = 0; }
+
+extern inline int pgd_none(pgd_t pgd)		{ return !pgd_val(pgd); }
+extern inline int pgd_bad(pgd_t pgd)		{ return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; }
+extern inline int pgd_present(pgd_t pgd)	{ return pgd_val(pgd) & _PAGE_VALID; }
+extern inline void pgd_clear(pgd_t * pgdp)	{ pgd_val(*pgdp) = 0; }
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+extern inline int pte_read(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOR); }
+extern inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOW); }
+extern inline int pte_exec(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOE); }
+extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+extern inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+
+extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
+extern inline pte_t pte_rdprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOR; return pte; }
+extern inline pte_t pte_exprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOE; return pte; }
+extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
+extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
+extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
+extern inline pte_t pte_mkread(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOR; return pte; }
+extern inline pte_t pte_mkexec(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOE; return pte; }
+extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
+extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
+
+#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+}
+
+/* Find an entry in the third-level page table.. */
+extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
+{
+	return (pte_t *) pmd_page_kernel(*dir)
+		+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
+}
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir),(addr))
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+extern pgd_t swapper_pg_dir[1024];
+
+/*
+ * The Alpha doesn't have any external MMU info:  the kernel page
+ * tables contain all the necessary information.
+ */
+extern inline void update_mmu_cache(struct vm_area_struct * vma,
+	unsigned long address, pte_t pte)
+{
+}
+
+/*
+ * Non-present pages:  high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_offset(x)		((x).val >> 40)
+#define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 32)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 32) | _PAGE_FILE })
+
+#define PTE_FILE_MAX_BITS	32
+
+#ifndef CONFIG_DISCONTIGMEM
+#define kern_addr_valid(addr)	(1)
+#endif
+
+#define io_remap_page_range(vma, start, busaddr, size, prot)	\
+({								\
+	void *va = (void __force *)ioremap(busaddr, size);	\
+	unsigned long pfn = virt_to_phys(va) >> PAGE_SHIFT;	\
+	remap_pfn_range(vma, start, pfn, size, prot);		\
+})
+
+#define io_remap_pfn_range(vma, start, pfn, size, prot)	\
+		remap_pfn_range(vma, start, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void paging_init(void);
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* _ALPHA_PGTABLE_H */
diff --git a/include/asm-alpha/poll.h b/include/asm-alpha/poll.h
new file mode 100644
index 000000000000..34f333b762a0
--- /dev/null
+++ b/include/asm-alpha/poll.h
@@ -0,0 +1,23 @@
+#ifndef __ALPHA_POLL_H
+#define __ALPHA_POLL_H
+
+#define POLLIN		(1 << 0)
+#define POLLPRI		(1 << 1)
+#define POLLOUT		(1 << 2)
+#define POLLERR		(1 << 3)
+#define POLLHUP		(1 << 4)
+#define POLLNVAL	(1 << 5)
+#define POLLRDNORM	(1 << 6)
+#define POLLRDBAND	(1 << 7)
+#define POLLWRNORM	(1 << 8)
+#define POLLWRBAND	(1 << 9)
+#define POLLMSG		(1 << 10)
+#define POLLREMOVE	(1 << 11)
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-alpha/posix_types.h b/include/asm-alpha/posix_types.h
new file mode 100644
index 000000000000..c78c04a94f4e
--- /dev/null
+++ b/include/asm-alpha/posix_types.h
@@ -0,0 +1,123 @@
+#ifndef _ALPHA_POSIX_TYPES_H
+#define _ALPHA_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_timer_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __KERNEL__
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* __GNUC__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ALPHA_POSIX_TYPES_H */
diff --git a/include/asm-alpha/processor.h b/include/asm-alpha/processor.h
new file mode 100644
index 000000000000..059780a7d3d7
--- /dev/null
+++ b/include/asm-alpha/processor.h
@@ -0,0 +1,118 @@
+/*
+ * include/asm-alpha/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+#ifndef __ASM_ALPHA_PROCESSOR_H
+#define __ASM_ALPHA_PROCESSOR_H
+
+#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
+
+/*
+ * Returns current instruction pointer ("program counter").
+ */
+#define current_text_addr() \
+  ({ void *__pc; __asm__ ("br %0,.+4" : "=r"(__pc)); __pc; })
+
+/*
+ * We have a 42-bit user address space: 4TB user VM...
+ */
+#define TASK_SIZE (0x40000000000UL)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE \
+  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+/* This is dead.  Everything has been moved to thread_info.  */
+struct thread_struct { };
+#define INIT_THREAD  { }
+
+/* Return saved PC of a blocked thread.  */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* Do necessary setup to start up a newly executed thread.  */
+extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/* Create a kernel thread without removing it from tasklists.  */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* See arch/alpha/kernel/ptrace.c for details.  */
+#define PT_REG(reg) \
+  (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
+
+#define SW_REG(reg) \
+ (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
+  + offsetof(struct switch_stack, reg))
+
+#define KSTK_EIP(tsk) \
+  (*(unsigned long *)(PT_REG(pc) + (unsigned long) ((tsk)->thread_info)))
+
+#define KSTK_ESP(tsk) \
+  ((tsk) == current ? rdusp() : (tsk)->thread_info->pcb.usp)
+
+#define cpu_relax()	barrier()
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+#ifndef CONFIG_SMP
+/* Nothing to prefetch. */
+#define spin_lock_prefetch(lock)  	do { } while (0)
+#endif
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)
+extern inline void prefetch(const void *ptr)  
+{ 
+	__builtin_prefetch(ptr, 0, 3);
+}
+
+extern inline void prefetchw(const void *ptr)  
+{
+	__builtin_prefetch(ptr, 1, 3);
+}
+
+#ifdef CONFIG_SMP
+extern inline void spin_lock_prefetch(const void *ptr)  
+{
+	__builtin_prefetch(ptr, 1, 3);
+}
+#endif
+
+#else
+extern inline void prefetch(const void *ptr)  
+{ 
+	__asm__ ("ldl $31,%0" : : "m"(*(char *)ptr)); 
+}
+
+extern inline void prefetchw(const void *ptr)  
+{
+	__asm__ ("ldq $31,%0" : : "m"(*(char *)ptr)); 
+}
+
+#ifdef CONFIG_SMP
+extern inline void spin_lock_prefetch(const void *ptr)  
+{
+	__asm__ ("ldq $31,%0" : : "m"(*(char *)ptr)); 
+}
+#endif
+
+#endif /* GCC 3.1 */
+
+#endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/include/asm-alpha/ptrace.h b/include/asm-alpha/ptrace.h
new file mode 100644
index 000000000000..d462c5e14c13
--- /dev/null
+++ b/include/asm-alpha/ptrace.h
@@ -0,0 +1,82 @@
+#ifndef _ASMAXP_PTRACE_H
+#define _ASMAXP_PTRACE_H
+
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry
+ *
+ * NOTE! I want to minimize the overhead of system calls, so this
+ * struct has as little information as possible.  I does not have
+ *
+ *  - floating point regs: the kernel doesn't change those
+ *  - r9-15: saved by the C compiler
+ *
+ * This makes "fork()" and "exec()" a bit more complex, but should
+ * give us low system call latency.
+ */
+
+struct pt_regs {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r19;
+	unsigned long r20;
+	unsigned long r21;
+	unsigned long r22;
+	unsigned long r23;
+	unsigned long r24;
+	unsigned long r25;
+	unsigned long r26;
+	unsigned long r27;
+	unsigned long r28;
+	unsigned long hae;
+/* JRP - These are the values provided to a0-a2 by PALcode */
+	unsigned long trap_a0;
+	unsigned long trap_a1;
+	unsigned long trap_a2;
+/* These are saved by PAL-code: */
+	unsigned long ps;
+	unsigned long pc;
+	unsigned long gp;
+	unsigned long r16;
+	unsigned long r17;
+	unsigned long r18;
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long r26;
+	unsigned long fp[32];	/* fp[31] is fpcr */
+};
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->ps & 8) != 0)
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#define alpha_task_regs(task) \
+  ((struct pt_regs *) ((long) (task)->thread_info + 2*PAGE_SIZE) - 1)
+
+#define force_successful_syscall_return() (alpha_task_regs(current)->r0 = 0)
+
+#endif
+
+#endif
diff --git a/include/asm-alpha/reg.h b/include/asm-alpha/reg.h
new file mode 100644
index 000000000000..86ff916fb069
--- /dev/null
+++ b/include/asm-alpha/reg.h
@@ -0,0 +1,52 @@
+#ifndef __reg_h__
+#define __reg_h__
+
+/*
+ * Exception frame offsets.
+ */
+#define EF_V0		0
+#define EF_T0		1
+#define EF_T1		2
+#define EF_T2		3
+#define EF_T3		4
+#define EF_T4		5
+#define EF_T5		6
+#define EF_T6		7
+#define EF_T7		8
+#define EF_S0		9
+#define EF_S1		10
+#define EF_S2		11
+#define EF_S3		12
+#define EF_S4		13
+#define EF_S5		14
+#define EF_S6		15
+#define EF_A3		16
+#define EF_A4		17
+#define EF_A5		18
+#define EF_T8		19
+#define EF_T9		20
+#define EF_T10		21
+#define EF_T11		22
+#define EF_RA		23
+#define EF_T12		24
+#define EF_AT		25
+#define EF_SP		26
+#define EF_PS		27
+#define EF_PC		28
+#define EF_GP		29
+#define EF_A0		30
+#define EF_A1		31
+#define EF_A2		32
+
+#define EF_SIZE		(33*8)
+#define HWEF_SIZE	(6*8)		/* size of PAL frame (PS-A2) */
+
+#define EF_SSIZE	(EF_SIZE - HWEF_SIZE)
+
+/*
+ * Map register number into core file offset.
+ */
+#define CORE_REG(reg, ubase) \
+	(((unsigned long *)((unsigned long)(ubase)))[reg])
+
+#endif /* __reg_h__ */
diff --git a/include/asm-alpha/regdef.h b/include/asm-alpha/regdef.h
new file mode 100644
index 000000000000..142df9c4f8b8
--- /dev/null
+++ b/include/asm-alpha/regdef.h
@@ -0,0 +1,44 @@
+#ifndef __alpha_regdef_h__
+#define __alpha_regdef_h__
+
+#define v0	$0	/* function return value */
+
+#define t0	$1	/* temporary registers (caller-saved) */
+#define t1	$2
+#define t2	$3
+#define t3	$4
+#define t4	$5
+#define t5	$6
+#define t6	$7
+#define t7	$8
+
+#define	s0	$9	/* saved-registers (callee-saved registers) */
+#define	s1	$10
+#define	s2	$11
+#define	s3	$12
+#define	s4	$13
+#define	s5	$14
+#define	s6	$15
+#define	fp	s6	/* frame-pointer (s6 in frame-less procedures) */
+
+#define a0	$16	/* argument registers (caller-saved) */
+#define a1	$17
+#define a2	$18
+#define a3	$19
+#define a4	$20
+#define a5	$21
+
+#define t8	$22	/* more temps (caller-saved) */
+#define t9	$23
+#define t10	$24
+#define t11	$25
+#define ra	$26	/* return address register */
+#define t12	$27
+
+#define pv	t12	/* procedure-variable register */
+#define AT	$at	/* assembler temporary */
+#define gp	$29	/* global pointer */
+#define sp	$30	/* stack pointer */
+#define zero	$31	/* reads as zero, writes are noops */
+
+#endif /* __alpha_regdef_h__ */
diff --git a/include/asm-alpha/resource.h b/include/asm-alpha/resource.h
new file mode 100644
index 000000000000..c10874ff5973
--- /dev/null
+++ b/include/asm-alpha/resource.h
@@ -0,0 +1,22 @@
+#ifndef _ALPHA_RESOURCE_H
+#define _ALPHA_RESOURCE_H
+
+/*
+ * Alpha/Linux-specific ordering of these four resource limit IDs,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_AS		7	/* address space limit */
+#define RLIMIT_NPROC		8	/* max number of processes */
+#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.  Fine, it's unsigned, but
+ * we retain the old value for compatibility, especially with DU. 
+ * When you run into the 2^63 barrier, you call me.
+ */
+#define RLIM_INFINITY		0x7ffffffffffffffful
+
+#include <asm-generic/resource.h>
+
+#endif /* _ALPHA_RESOURCE_H */
diff --git a/include/asm-alpha/rtc.h b/include/asm-alpha/rtc.h
new file mode 100644
index 000000000000..4e854b1333eb
--- /dev/null
+++ b/include/asm-alpha/rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ALPHA_RTC_H
+#define _ALPHA_RTC_H
+
+/*
+ * Alpha uses the default access methods for the RTC.
+ */
+
+#include <asm-generic/rtc.h>
+
+#endif
diff --git a/include/asm-alpha/rwsem.h b/include/asm-alpha/rwsem.h
new file mode 100644
index 000000000000..8e058a67c9a4
--- /dev/null
+++ b/include/asm-alpha/rwsem.h
@@ -0,0 +1,266 @@
+#ifndef _ALPHA_RWSEM_H
+#define _ALPHA_RWSEM_H
+
+/*
+ * Written by Ivan Kokshaysky <ink@jurassic.park.msu.ru>, 2001.
+ * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
+ */
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	long			count;
+#define RWSEM_UNLOCKED_VALUE		0x0000000000000000L
+#define RWSEM_ACTIVE_BIAS		0x0000000000000001L
+#define RWSEM_ACTIVE_MASK		0x00000000ffffffffL
+#define RWSEM_WAITING_BIAS		(-0x0000000100000000L)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	LIST_HEAD_INIT((name).wait_list) __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count += RWSEM_ACTIVE_READ_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	long old, new, res;
+
+	res = sem->count;
+	do {
+		new = res + RWSEM_ACTIVE_READ_BIAS;
+		if (new <= 0)
+			break;
+		old = res;
+		res = cmpxchg(&sem->count, old, new);
+	} while (res != old);
+	return res >= 0 ? 1 : 0;
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count += RWSEM_ACTIVE_WRITE_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount))
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	long ret = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+			   RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count -= RWSEM_ACTIVE_READ_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldq_l	%0,%1\n"
+	"	subq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		if ((int)oldcount - RWSEM_ACTIVE_READ_BIAS == 0)
+			rwsem_wake(sem);
+}
+
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	long count;
+#ifndef	CONFIG_SMP
+	sem->count -= RWSEM_ACTIVE_WRITE_BIAS;
+	count = sem->count;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldq_l	%0,%1\n"
+	"	subq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	subq	%0,%3,%0\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (count), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(count))
+		if ((int)count == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count -= RWSEM_WAITING_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (-RWSEM_WAITING_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		rwsem_downgrade_wake(sem);
+}
+
+static inline void rwsem_atomic_add(long val, struct rw_semaphore *sem)
+{
+#ifndef	CONFIG_SMP
+	sem->count += val;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%2,%0\n"
+	"	stq_c	%0,%1\n"
+	"	beq	%0,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (sem->count)
+	:"Ir" (val), "m" (sem->count));
+#endif
+}
+
+static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem)
+{
+#ifndef	CONFIG_SMP
+	sem->count += val;
+	return sem->count;
+#else
+	long ret, temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq 	%0,%3,%2\n"
+	"	addq	%0,%3,%0\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (ret), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (val), "m" (sem->count));
+
+	return ret;
+#endif
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_RWSEM_H */
diff --git a/include/asm-alpha/scatterlist.h b/include/asm-alpha/scatterlist.h
new file mode 100644
index 000000000000..6afb8bd3aaf9
--- /dev/null
+++ b/include/asm-alpha/scatterlist.h
@@ -0,0 +1,21 @@
+#ifndef _ALPHA_SCATTERLIST_H
+#define _ALPHA_SCATTERLIST_H
+
+#include <asm/page.h>
+  
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+
+	unsigned int length;
+
+	dma_addr_t dma_address;
+	__u32 dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* !(_ALPHA_SCATTERLIST_H) */
diff --git a/include/asm-alpha/sections.h b/include/asm-alpha/sections.h
new file mode 100644
index 000000000000..43b40edd6e44
--- /dev/null
+++ b/include/asm-alpha/sections.h
@@ -0,0 +1,7 @@
+#ifndef _ALPHA_SECTIONS_H
+#define _ALPHA_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-alpha/segment.h b/include/asm-alpha/segment.h
new file mode 100644
index 000000000000..0453d97daae7
--- /dev/null
+++ b/include/asm-alpha/segment.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SEGMENT_H
+#define __ALPHA_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/include/asm-alpha/semaphore.h b/include/asm-alpha/semaphore.h
new file mode 100644
index 000000000000..eb2cbd97d404
--- /dev/null
+++ b/include/asm-alpha/semaphore.h
@@ -0,0 +1,153 @@
+#ifndef _ALPHA_SEMAPHORE_H
+#define _ALPHA_SEMAPHORE_H
+
+/*
+ * SMP- and interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ * (C) Copyright 1996, 2000 Richard Henderson
+ */
+
+#include <asm/current.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <linux/compiler.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)			\
+{								\
+	.count	= ATOMIC_INIT(n),				\
+  	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait),	\
+}
+
+#define __MUTEX_INITIALIZER(name)			\
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)		\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+	/*
+	 * Logically, 
+	 *   *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+	 * except that gcc produces better initializing by parts yet.
+	 */
+
+	atomic_set(&sem->count, val);
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void down(struct semaphore *);
+extern void __down_failed(struct semaphore *);
+extern int  down_interruptible(struct semaphore *);
+extern int  __down_failed_interruptible(struct semaphore *);
+extern int  down_trylock(struct semaphore *);
+extern void up(struct semaphore *);
+extern void __up_wakeup(struct semaphore *);
+
+/*
+ * Hidden out of line code is fun, but extremely messy.  Rely on newer
+ * compilers to do a respectable job with this.  The contention cases
+ * are handled out of line in arch/alpha/kernel/semaphore.c.
+ */
+
+static inline void __down(struct semaphore *sem)
+{
+	long count;
+	might_sleep();
+	count = atomic_dec_return(&sem->count);
+	if (unlikely(count < 0))
+		__down_failed(sem);
+}
+
+static inline int __down_interruptible(struct semaphore *sem)
+{
+	long count;
+	might_sleep();
+	count = atomic_dec_return(&sem->count);
+	if (unlikely(count < 0))
+		return __down_failed_interruptible(sem);
+	return 0;
+}
+
+/*
+ * down_trylock returns 0 on success, 1 if we failed to get the lock.
+ */
+
+static inline int __down_trylock(struct semaphore *sem)
+{
+	long ret;
+
+	/* "Equivalent" C:
+
+	   do {
+		ret = ldl_l;
+		--ret;
+		if (ret < 0)
+			break;
+		ret = stl_c = ret;
+	   } while (ret == 0);
+	*/
+	__asm__ __volatile__(
+		"1:	ldl_l	%0,%1\n"
+		"	subl	%0,1,%0\n"
+		"	blt	%0,2f\n"
+		"	stl_c	%0,%1\n"
+		"	beq	%0,3f\n"
+		"	mb\n"
+		"2:\n"
+		".subsection 2\n"
+		"3:	br	1b\n"
+		".previous"
+		: "=&r" (ret), "=m" (sem->count)
+		: "m" (sem->count));
+
+	return ret < 0;
+}
+
+static inline void __up(struct semaphore *sem)
+{
+	if (unlikely(atomic_inc_return(&sem->count) <= 0))
+		__up_wakeup(sem);
+}
+
+#if !defined(CONFIG_DEBUG_SEMAPHORE)
+extern inline void down(struct semaphore *sem)
+{
+	__down(sem);
+}
+extern inline int down_interruptible(struct semaphore *sem)
+{
+	return __down_interruptible(sem);
+}
+extern inline int down_trylock(struct semaphore *sem)
+{
+	return __down_trylock(sem);
+}
+extern inline void up(struct semaphore *sem)
+{
+	__up(sem);
+}
+#endif
+
+#endif
diff --git a/include/asm-alpha/sembuf.h b/include/asm-alpha/sembuf.h
new file mode 100644
index 000000000000..7b38b1534784
--- /dev/null
+++ b/include/asm-alpha/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ALPHA_SEMBUF_H
+#define _ALPHA_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ALPHA_SEMBUF_H */
diff --git a/include/asm-alpha/serial.h b/include/asm-alpha/serial.h
new file mode 100644
index 000000000000..7b2d9ee95a44
--- /dev/null
+++ b/include/asm-alpha/serial.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-alpha/serial.h
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#endif
+	
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-alpha/setup.h b/include/asm-alpha/setup.h
new file mode 100644
index 000000000000..2e023a4aa317
--- /dev/null
+++ b/include/asm-alpha/setup.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SETUP_H
+#define __ALPHA_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif
diff --git a/include/asm-alpha/sfp-machine.h b/include/asm-alpha/sfp-machine.h
new file mode 100644
index 000000000000..5fe63afbd474
--- /dev/null
+++ b/include/asm-alpha/sfp-machine.h
@@ -0,0 +1,82 @@
+/* Machine-dependent software floating-point definitions.
+   Alpha kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jakub@redhat.com) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		_FP_QNANBIT_S
+#define _FP_NANFRAC_D		_FP_QNANBIT_D
+#define _FP_NANFRAC_Q		_FP_QNANBIT_Q
+#define _FP_NANSIGN_S		1
+#define _FP_NANSIGN_D		1
+#define _FP_NANSIGN_Q		1
+
+#define _FP_KEEPNANFRACP 1
+
+/* Alpha Architecture Handbook, 4.7.10.4 sais that
+ * we should prefer any type of NaN in Fb, then Fa.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    R##_s = Y##_s;						\
+    _FP_FRAC_COPY_##wc(R,X);					\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE	mode
+#define FP_RND_NEAREST	(FPCR_DYN_NORMAL >> FPCR_DYN_SHIFT)
+#define FP_RND_ZERO	(FPCR_DYN_CHOPPED >> FPCR_DYN_SHIFT)
+#define FP_RND_PINF	(FPCR_DYN_PLUS >> FPCR_DYN_SHIFT)
+#define FP_RND_MINF	(FPCR_DYN_MINUS >> FPCR_DYN_SHIFT)
+
+/* Exception flags. */
+#define FP_EX_INVALID		IEEE_TRAP_ENABLE_INV
+#define FP_EX_OVERFLOW		IEEE_TRAP_ENABLE_OVF
+#define FP_EX_UNDERFLOW		IEEE_TRAP_ENABLE_UNF
+#define FP_EX_DIVZERO		IEEE_TRAP_ENABLE_DZE
+#define FP_EX_INEXACT		IEEE_TRAP_ENABLE_INE
+#define FP_EX_DENORM		IEEE_TRAP_ENABLE_DNO
+
+#define FP_DENORM_ZERO		(swcr & IEEE_MAP_DMZ)
+
+/* We write the results always */
+#define FP_INHIBIT_RESULTS 0
+
+#endif
diff --git a/include/asm-alpha/shmbuf.h b/include/asm-alpha/shmbuf.h
new file mode 100644
index 000000000000..37ee84f05085
--- /dev/null
+++ b/include/asm-alpha/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ALPHA_SHMBUF_H
+#define _ALPHA_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ALPHA_SHMBUF_H */
diff --git a/include/asm-alpha/shmparam.h b/include/asm-alpha/shmparam.h
new file mode 100644
index 000000000000..cc901d58aebb
--- /dev/null
+++ b/include/asm-alpha/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASMAXP_SHMPARAM_H
+#define _ASMAXP_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASMAXP_SHMPARAM_H */
diff --git a/include/asm-alpha/sigcontext.h b/include/asm-alpha/sigcontext.h
new file mode 100644
index 000000000000..323cdb026198
--- /dev/null
+++ b/include/asm-alpha/sigcontext.h
@@ -0,0 +1,34 @@
+#ifndef _ASMAXP_SIGCONTEXT_H
+#define _ASMAXP_SIGCONTEXT_H
+
+struct sigcontext {
+	/*
+	 * What should we have here? I'd probably better use the same
+	 * stack layout as OSF/1, just in case we ever want to try
+	 * running their binaries.. 
+	 *
+	 * This is the basic layout, but I don't know if we'll ever
+	 * actually fill in all the values..
+	 */
+	 long		sc_onstack;
+	 long		sc_mask;
+	 long		sc_pc;
+	 long		sc_ps;
+	 long		sc_regs[32];
+	 long		sc_ownedfp;
+	 long		sc_fpregs[32];
+	 unsigned long	sc_fpcr;
+	 unsigned long	sc_fp_control;
+	 unsigned long	sc_reserved1, sc_reserved2;
+	 unsigned long	sc_ssize;
+	 char *		sc_sbase;
+	 unsigned long	sc_traparg_a0;
+	 unsigned long	sc_traparg_a1;
+	 unsigned long	sc_traparg_a2;
+	 unsigned long	sc_fp_trap_pc;
+	 unsigned long	sc_fp_trigger_sum;
+	 unsigned long	sc_fp_trigger_inst;
+};
+
+
+#endif
diff --git a/include/asm-alpha/siginfo.h b/include/asm-alpha/siginfo.h
new file mode 100644
index 000000000000..86bcab59c52b
--- /dev/null
+++ b/include/asm-alpha/siginfo.h
@@ -0,0 +1,11 @@
+#ifndef _ALPHA_SIGINFO_H
+#define _ALPHA_SIGINFO_H
+
+#define __ARCH_SI_PREAMBLE_SIZE		(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+
+#define SIGEV_PAD_SIZE			((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-alpha/signal.h b/include/asm-alpha/signal.h
new file mode 100644
index 000000000000..25f98bc5576f
--- /dev/null
+++ b/include/asm-alpha/signal.h
@@ -0,0 +1,197 @@
+#ifndef _ASMAXP_SIGNAL_H
+#define _ASMAXP_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Digital Unix defines 64 signals.  Most things should be clean enough
+   to redefine this at will, if care is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * Linux/AXP has different signal numbers that Linux/i386: I'm trying
+ * to make it OSF/1 binary compatible, at least for normal binaries.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGEMT		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGBUS		10
+#define SIGSEGV		11
+#define SIGSYS		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG		16
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGINFO		29
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+#define SIGPOLL	SIGIO
+#define SIGPWR	SIGINFO
+#define SIGIOT	SIGABRT
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+
+#define SA_ONSTACK	0x00000001
+#define SA_RESTART	0x00000002
+#define SA_NOCLDSTOP	0x00000004
+#define SA_NODEFER	0x00000008
+#define SA_RESETHAND	0x00000010
+#define SA_NOCLDWAIT	0x00000020
+#define SA_SIGINFO	0x00000040
+
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_NOMASK	SA_NODEFER
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x40000000
+#endif
+
+#define SIG_BLOCK          1	/* for blocking signals */
+#define SIG_UNBLOCK        2	/* for unblocking signals */
+#define SIG_SETMASK        3	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct osf_sigaction {
+	__sighandler_t	sa_handler;
+	old_sigset_t	sa_mask;
+	int		sa_flags;
+};
+
+struct sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	sigset_t	sa_mask;	/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+	__sigrestore_t ka_restorer;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t	_sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t	sa_mask;
+	int		sa_flags;
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+/* sigstack(2) is deprecated, and will be withdrawn in a future version
+   of the X/Open CAE Specification.  Use sigaltstack instead.  It is only
+   implemented here for OSF/1 compatibility.  */
+
+struct sigstack {
+	void __user *ss_sp;
+	int ss_onstack;
+};
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif
+
+#endif
diff --git a/include/asm-alpha/smp.h b/include/asm-alpha/smp.h
new file mode 100644
index 000000000000..cbc173ae45aa
--- /dev/null
+++ b/include/asm-alpha/smp.h
@@ -0,0 +1,63 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <asm/pal.h>
+
+/* HACK: Cabrio WHAMI return value is bogus if more than 8 bits used.. :-( */
+
+static __inline__ unsigned char
+__hard_smp_processor_id(void)
+{
+	register unsigned char __r0 __asm__("$0");
+	__asm__ __volatile__(
+		"call_pal %1 #whami"
+		: "=r"(__r0)
+		:"i" (PAL_whami)
+		: "$1", "$22", "$23", "$24", "$25");
+	return __r0;
+}
+
+#ifdef CONFIG_SMP
+
+#include <asm/irq.h>
+
+struct cpuinfo_alpha {
+	unsigned long loops_per_jiffy;
+	unsigned long last_asn;
+	int need_new_asn;
+	int asn_lock;
+	unsigned long ipi_count;
+	unsigned long prof_multiplier;
+	unsigned long prof_counter;
+	unsigned char mcheck_expected;
+	unsigned char mcheck_taken;
+	unsigned char mcheck_extra;
+} __attribute__((aligned(64)));
+
+extern struct cpuinfo_alpha cpu_data[NR_CPUS];
+
+#define PROC_CHANGE_PENALTY     20
+
+#define hard_smp_processor_id()	__hard_smp_processor_id()
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+extern cpumask_t cpu_present_mask;
+extern cpumask_t cpu_online_map;
+extern int smp_num_cpus;
+#define cpu_possible_map	cpu_present_mask
+
+int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);
+
+#else /* CONFIG_SMP */
+
+#define smp_call_function_on_cpu(func,info,retry,wait,cpu)    ({ 0; })
+
+#endif /* CONFIG_SMP */
+
+#define NO_PROC_ID	(-1)
+
+#endif
diff --git a/include/asm-alpha/socket.h b/include/asm-alpha/socket.h
new file mode 100644
index 000000000000..d00259d3dc78
--- /dev/null
+++ b/include/asm-alpha/socket.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+/*
+ * Note: we only bother about making the SOL_SOCKET options
+ * same as OSF/1, as that's all that "normal" programs are
+ * likely to set.  We don't necessarily want to be binary
+ * compatible with _everything_. 
+ */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+
+#define SO_TYPE		0x1008
+#define SO_ERROR	0x1007
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define	SO_RCVLOWAT	0x1010
+#define	SO_SNDLOWAT	0x1011
+#define	SO_RCVTIMEO	0x1012
+#define	SO_SNDTIMEO	0x1013
+#define SO_ACCEPTCONN	0x1014
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_BSDCOMPAT	14
+
+#define SO_PASSCRED	17
+#define SO_PEERCRED	18
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		30
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		19
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	20
+#define SO_SECURITY_ENCRYPTION_NETWORK		21
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-alpha/sockios.h b/include/asm-alpha/sockios.h
new file mode 100644
index 000000000000..e4961a740e5f
--- /dev/null
+++ b/include/asm-alpha/sockios.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_ALPHA_SOCKIOS_H
+#define _ASM_ALPHA_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp - linux-specific */
+
+#endif /* _ASM_ALPHA_SOCKIOS_H */
diff --git a/include/asm-alpha/spinlock.h b/include/asm-alpha/spinlock.h
new file mode 100644
index 000000000000..80780dba9986
--- /dev/null
+++ b/include/asm-alpha/spinlock.h
@@ -0,0 +1,212 @@
+#ifndef _ALPHA_SPINLOCK_H
+#define _ALPHA_SPINLOCK_H
+
+#include <linux/config.h>
+#include <asm/system.h>
+#include <linux/kernel.h>
+#include <asm/current.h>
+
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	int on_cpu;
+	int line_no;
+	void *previous;
+	struct task_struct * task;
+	const char *base_file;
+#endif
+} spinlock_t;
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPIN_LOCK_UNLOCKED	(spinlock_t){ 0, -1, 0, NULL, NULL, NULL }
+#else
+#define SPIN_LOCK_UNLOCKED	(spinlock_t){ 0 }
+#endif
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_unlock_wait(x)	do { barrier(); } while ((x)->lock)
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+extern void _raw_spin_unlock(spinlock_t * lock);
+extern void debug_spin_lock(spinlock_t * lock, const char *, int);
+extern int debug_spin_trylock(spinlock_t * lock, const char *, int);
+#define _raw_spin_lock(LOCK) \
+	debug_spin_lock(LOCK, __BASE_FILE__, __LINE__)
+#define _raw_spin_trylock(LOCK) \
+	debug_spin_trylock(LOCK, __BASE_FILE__, __LINE__)
+#else
+static inline void _raw_spin_unlock(spinlock_t * lock)
+{
+	mb();
+	lock->lock = 0;
+}
+
+static inline void _raw_spin_lock(spinlock_t * lock)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%0,%1\n"
+	"	bne	%0,2f\n"
+	"	lda	%0,1\n"
+	"	stl_c	%0,%1\n"
+	"	beq	%0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	ldl	%0,%1\n"
+	"	bne	%0,2b\n"
+	"	br	1b\n"
+	".previous"
+	: "=&r" (tmp), "=m" (lock->lock)
+	: "m"(lock->lock) : "memory");
+}
+
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	return !test_and_set_bit(0, &lock->lock);
+}
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+/***********************************************************/
+
+typedef struct {
+	volatile unsigned int lock;
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED	(rwlock_t){ 0 }
+
+#define rwlock_init(x)		do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+static inline int read_can_lock(rwlock_t *lock)
+{
+	return (lock->lock & 1) == 0;
+}
+
+static inline int write_can_lock(rwlock_t *lock)
+{
+	return lock->lock == 0;
+}
+
+#ifdef CONFIG_DEBUG_RWLOCK
+extern void _raw_write_lock(rwlock_t * lock);
+extern void _raw_read_lock(rwlock_t * lock);
+#else
+static inline void _raw_write_lock(rwlock_t * lock)
+{
+	long regx;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	bne	%1,6f\n"
+	"	lda	%1,1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"6:	ldl	%1,%0\n"
+	"	bne	%1,6b\n"
+	"	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+
+static inline void _raw_read_lock(rwlock_t * lock)
+{
+	long regx;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	blbs	%1,6f\n"
+	"	subl	%1,2,%1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"6:	ldl	%1,%0\n"
+	"	blbs	%1,6b\n"
+	"	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+#endif /* CONFIG_DEBUG_RWLOCK */
+
+static inline int _raw_read_trylock(rwlock_t * lock)
+{
+	long regx;
+	int success;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	lda	%2,0\n"
+	"	blbs	%1,2f\n"
+	"	subl	%1,2,%2\n"
+	"	stl_c	%2,%0\n"
+	"	beq	%2,6f\n"
+	"2:	mb\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx), "=&r" (success)
+	: "m" (*lock) : "memory");
+
+	return success;
+}
+
+static inline int _raw_write_trylock(rwlock_t * lock)
+{
+	long regx;
+	int success;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	lda	%2,0\n"
+	"	bne	%1,2f\n"
+	"	lda	%2,1\n"
+	"	stl_c	%2,%0\n"
+	"	beq	%2,6f\n"
+	"2:	mb\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx), "=&r" (success)
+	: "m" (*lock) : "memory");
+
+	return success;
+}
+
+static inline void _raw_write_unlock(rwlock_t * lock)
+{
+	mb();
+	lock->lock = 0;
+}
+
+static inline void _raw_read_unlock(rwlock_t * lock)
+{
+	long regx;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldl_l	%1,%0\n"
+	"	addl	%1,2,%1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+
+#endif /* _ALPHA_SPINLOCK_H */
diff --git a/include/asm-alpha/stat.h b/include/asm-alpha/stat.h
new file mode 100644
index 000000000000..07ad3e6b3f3e
--- /dev/null
+++ b/include/asm-alpha/stat.h
@@ -0,0 +1,48 @@
+#ifndef _ALPHA_STAT_H
+#define _ALPHA_STAT_H
+
+struct stat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	long		st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	unsigned int	st_blocks;
+	unsigned int	st_flags;
+	unsigned int	st_gen;
+};
+
+/* The stat64 structure increases the size of dev_t, blkcnt_t, adds
+   nanosecond resolution times, and padding for expansion.  */
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_rdev;
+	long		st_size;
+	unsigned long	st_blocks;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_blksize;
+	unsigned int	st_nlink;
+	unsigned int	__pad0;
+
+	unsigned long	st_atime;
+	unsigned long 	st_atime_nsec; 
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+  	long		__unused[3];
+};
+
+#endif
diff --git a/include/asm-alpha/statfs.h b/include/asm-alpha/statfs.h
new file mode 100644
index 000000000000..ad15830baefe
--- /dev/null
+++ b/include/asm-alpha/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ALPHA_STATFS_H
+#define _ALPHA_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-alpha/string.h b/include/asm-alpha/string.h
new file mode 100644
index 000000000000..9e44fea669bf
--- /dev/null
+++ b/include/asm-alpha/string.h
@@ -0,0 +1,68 @@
+#ifndef __ALPHA_STRING_H__
+#define __ALPHA_STRING_H__
+
+#ifdef __KERNEL__
+
+/*
+ * GCC of any recent vintage doesn't do stupid things with bcopy.
+ * EGCS 1.1 knows all about expanding memcpy inline, others don't.
+ *
+ * Similarly for a memset with data = 0.
+ */
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, size_t);
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, size_t);
+
+/* For backward compatibility with modules.  Unused otherwise.  */
+extern void * __memcpy(void *, const void *, size_t);
+
+#define memcpy __builtin_memcpy
+
+#define __HAVE_ARCH_MEMSET
+extern void * __constant_c_memset(void *, unsigned long, size_t);
+extern void * __memset(void *, int, size_t);
+extern void * memset(void *, int, size_t);
+
+#define memset(s, c, n)							    \
+(__builtin_constant_p(c)						    \
+ ? (__builtin_constant_p(n) && (c) == 0					    \
+    ? __builtin_memset((s),0,(n)) 					    \
+    : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
+ : __memset((s),(c),(n)))
+
+#define __HAVE_ARCH_STRCPY
+extern char * strcpy(char *,const char *);
+#define __HAVE_ARCH_STRNCPY
+extern char * strncpy(char *, const char *, size_t);
+#define __HAVE_ARCH_STRCAT
+extern char * strcat(char *, const char *);
+#define __HAVE_ARCH_STRNCAT
+extern char * strncat(char *, const char *, size_t);
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char *,int);
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char *,int);
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, size_t);
+
+/* The following routine is like memset except that it writes 16-bit
+   aligned values.  The DEST and COUNT parameters must be even for 
+   correct operation.  */
+
+#define __HAVE_ARCH_MEMSETW
+extern void * __memsetw(void *dest, unsigned short, size_t count);
+
+#define memsetw(s, c, n)						 \
+(__builtin_constant_p(c)						 \
+ ? __constant_c_memset((s),0x0001000100010001UL*(unsigned short)(c),(n)) \
+ : __memsetw((s),(c),(n)))
+
+extern int strcasecmp(const char *, const char *);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_STRING_H__ */
diff --git a/include/asm-alpha/suspend.h b/include/asm-alpha/suspend.h
new file mode 100644
index 000000000000..c7042d575851
--- /dev/null
+++ b/include/asm-alpha/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SUSPEND_H
+#define __ALPHA_SUSPEND_H
+
+/* Dummy include. */
+
+#endif  /* __ALPHA_SUSPEND_H */
diff --git a/include/asm-alpha/sysinfo.h b/include/asm-alpha/sysinfo.h
new file mode 100644
index 000000000000..086aba284df2
--- /dev/null
+++ b/include/asm-alpha/sysinfo.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-alpha/sysinfo.h
+ */
+
+#ifndef __ASM_ALPHA_SYSINFO_H
+#define __ASM_ALPHA_SYSINFO_H
+
+/* This defines the subset of the OSF/1 getsysinfo/setsysinfo calls
+   that we support.  */
+
+#define GSI_UACPROC			8
+#define GSI_IEEE_FP_CONTROL		45
+#define GSI_IEEE_STATE_AT_SIGNAL	46
+#define GSI_PROC_TYPE			60
+#define GSI_GET_HWRPB			101
+
+#define SSI_NVPAIRS			1
+#define SSI_IEEE_FP_CONTROL		14
+#define SSI_IEEE_STATE_AT_SIGNAL	15
+#define SSI_IEEE_IGNORE_STATE_AT_SIGNAL	16
+#define SSI_IEEE_RAISE_EXCEPTION	1001	/* linux specific */
+
+#define SSIN_UACPROC			6
+
+#define UAC_BITMASK			7
+#define UAC_NOPRINT			1
+#define UAC_NOFIX			2
+#define UAC_SIGBUS			4
+
+
+#ifdef __KERNEL__
+
+/* This is the shift that is applied to the UAC bits as stored in the
+   per-thread flags.  See thread_info.h.  */
+#define UAC_SHIFT			6
+
+#endif
+
+#endif /* __ASM_ALPHA_SYSINFO_H */
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
new file mode 100644
index 000000000000..c08ce970ff8c
--- /dev/null
+++ b/include/asm-alpha/system.h
@@ -0,0 +1,626 @@
+#ifndef __ALPHA_SYSTEM_H
+#define __ALPHA_SYSTEM_H
+
+#include <linux/config.h>
+#include <asm/pal.h>
+#include <asm/page.h>
+
+/*
+ * System defines.. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.
+ */
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char*)(PARAM + 0x0000))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
+/*
+ * This is the logout header that should be common to all platforms
+ * (assuming they are running OSF/1 PALcode, I guess).
+ */
+struct el_common {
+	unsigned int	size;		/* size in bytes of logout area */
+	unsigned int	sbz1	: 30;	/* should be zero */
+	unsigned int	err2	:  1;	/* second error */
+	unsigned int	retry	:  1;	/* retry flag */
+	unsigned int	proc_offset;	/* processor-specific offset */
+	unsigned int	sys_offset;	/* system-specific offset */
+	unsigned int	code;		/* machine check code */
+	unsigned int	frame_rev;	/* frame revision */
+};
+
+/* Machine Check Frame for uncorrectable errors (Large format)
+ *      --- This is used to log uncorrectable errors such as
+ *          double bit ECC errors.
+ *      --- These errors are detected by both processor and systems.
+ */
+struct el_common_EV5_uncorrectable_mcheck {
+        unsigned long   shadow[8];        /* Shadow reg. 8-14, 25           */
+        unsigned long   paltemp[24];      /* PAL TEMP REGS.                 */
+        unsigned long   exc_addr;         /* Address of excepting instruction*/
+        unsigned long   exc_sum;          /* Summary of arithmetic traps.   */
+        unsigned long   exc_mask;         /* Exception mask (from exc_sum). */
+        unsigned long   pal_base;         /* Base address for PALcode.      */
+        unsigned long   isr;              /* Interrupt Status Reg.          */
+        unsigned long   icsr;             /* CURRENT SETUP OF EV5 IBOX      */
+        unsigned long   ic_perr_stat;     /* I-CACHE Reg. <11> set Data parity
+                                                         <12> set TAG parity*/
+        unsigned long   dc_perr_stat;     /* D-CACHE error Reg. Bits set to 1:
+                                                     <2> Data error in bank 0
+                                                     <3> Data error in bank 1
+                                                     <4> Tag error in bank 0
+                                                     <5> Tag error in bank 1 */
+        unsigned long   va;               /* Effective VA of fault or miss. */
+        unsigned long   mm_stat;          /* Holds the reason for D-stream 
+                                             fault or D-cache parity errors */
+        unsigned long   sc_addr;          /* Address that was being accessed
+                                             when EV5 detected Secondary cache
+                                             failure.                 */
+        unsigned long   sc_stat;          /* Helps determine if the error was
+                                             TAG/Data parity(Secondary Cache)*/
+        unsigned long   bc_tag_addr;      /* Contents of EV5 BC_TAG_ADDR    */
+        unsigned long   ei_addr;          /* Physical address of any transfer
+                                             that is logged in EV5 EI_STAT */
+        unsigned long   fill_syndrome;    /* For correcting ECC errors.     */
+        unsigned long   ei_stat;          /* Helps identify reason of any 
+                                             processor uncorrectable error
+                                             at its external interface.     */
+        unsigned long   ld_lock;          /* Contents of EV5 LD_LOCK register*/
+};
+
+struct el_common_EV6_mcheck {
+	unsigned int FrameSize;		/* Bytes, including this field */
+	unsigned int FrameFlags;	/* <31> = Retry, <30> = Second Error */
+	unsigned int CpuOffset;		/* Offset to CPU-specific info */
+	unsigned int SystemOffset;	/* Offset to system-specific info */
+	unsigned int MCHK_Code;
+	unsigned int MCHK_Frame_Rev;
+	unsigned long I_STAT;		/* EV6 Internal Processor Registers */
+	unsigned long DC_STAT;		/* (See the 21264 Spec) */
+	unsigned long C_ADDR;
+	unsigned long DC1_SYNDROME;
+	unsigned long DC0_SYNDROME;
+	unsigned long C_STAT;
+	unsigned long C_STS;
+	unsigned long MM_STAT;
+	unsigned long EXC_ADDR;
+	unsigned long IER_CM;
+	unsigned long ISUM;
+	unsigned long RESERVED0;
+	unsigned long PAL_BASE;
+	unsigned long I_CTL;
+	unsigned long PCTX;
+};
+
+extern void halt(void) __attribute__((noreturn));
+#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
+
+#define switch_to(P,N,L)						\
+  do {									\
+    (L) = alpha_switch_to(virt_to_phys(&(N)->thread_info->pcb), (P));	\
+    check_mmu_context();						\
+  } while (0)
+
+struct task_struct;
+extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
+
+#define mb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define rmb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define wmb() \
+__asm__ __volatile__("wmb": : :"memory")
+
+#define read_barrier_depends() \
+__asm__ __volatile__("mb": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	barrier()
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#define set_wmb(var, value) \
+do { var = value; wmb(); } while (0)
+
+#define imb() \
+__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
+
+#define draina() \
+__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
+
+enum implver_enum {
+	IMPLVER_EV4,
+	IMPLVER_EV5,
+	IMPLVER_EV6
+};
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define implver()				\
+({ unsigned long __implver;			\
+   __asm__ ("implver %0" : "=r"(__implver));	\
+   (enum implver_enum) __implver; })
+#else
+/* Try to eliminate some dead code.  */
+#ifdef CONFIG_ALPHA_EV4
+#define implver() IMPLVER_EV4
+#endif
+#ifdef CONFIG_ALPHA_EV5
+#define implver() IMPLVER_EV5
+#endif
+#if defined(CONFIG_ALPHA_EV6)
+#define implver() IMPLVER_EV6
+#endif
+#endif
+
+enum amask_enum {
+	AMASK_BWX = (1UL << 0),
+	AMASK_FIX = (1UL << 1),
+	AMASK_CIX = (1UL << 2),
+	AMASK_MAX = (1UL << 8),
+	AMASK_PRECISE_TRAP = (1UL << 9),
+};
+
+#define amask(mask)						\
+({ unsigned long __amask, __input = (mask);			\
+   __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input));	\
+   __amask; })
+
+#define __CALL_PAL_R0(NAME, TYPE)				\
+static inline TYPE NAME(void)					\
+{								\
+	register TYPE __r0 __asm__("$0");			\
+	__asm__ __volatile__(					\
+		"call_pal %1 # " #NAME				\
+		:"=r" (__r0)					\
+		:"i" (PAL_ ## NAME)				\
+		:"$1", "$16", "$22", "$23", "$24", "$25");	\
+	return __r0;						\
+}
+
+#define __CALL_PAL_W1(NAME, TYPE0)				\
+static inline void NAME(TYPE0 arg0)				\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %1 # "#NAME				\
+		: "=r"(__r16)					\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_W2(NAME, TYPE0, TYPE1)			\
+static inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17)			\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0)			\
+static inline RTYPE NAME(TYPE0 arg0)				\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r0)			\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1)		\
+static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %3 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17), "=r"(__r0)		\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+__CALL_PAL_W1(cflush, unsigned long);
+__CALL_PAL_R0(rdmces, unsigned long);
+__CALL_PAL_R0(rdps, unsigned long);
+__CALL_PAL_R0(rdusp, unsigned long);
+__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
+__CALL_PAL_R0(whami, unsigned long);
+__CALL_PAL_W2(wrent, void*, unsigned long);
+__CALL_PAL_W1(wripir, unsigned long);
+__CALL_PAL_W1(wrkgp, unsigned long);
+__CALL_PAL_W1(wrmces, unsigned long);
+__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
+__CALL_PAL_W1(wrusp, unsigned long);
+__CALL_PAL_W1(wrvptptr, unsigned long);
+
+#define IPL_MIN		0
+#define IPL_SW0		1
+#define IPL_SW1		2
+#define IPL_DEV0	3
+#define IPL_DEV1	4
+#define IPL_TIMER	5
+#define IPL_PERF	6
+#define IPL_POWERFAIL	6
+#define IPL_MCHECK	7
+#define IPL_MAX		7
+
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+#undef IPL_MIN
+#define IPL_MIN		__min_ipl
+extern int __min_ipl;
+#endif
+
+#define getipl()		(rdps() & 7)
+#define setipl(ipl)		((void) swpipl(ipl))
+
+#define local_irq_disable()			do { setipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_enable()			do { barrier(); setipl(IPL_MIN); } while(0)
+#define local_save_flags(flags)	((flags) = rdps())
+#define local_irq_save(flags)	do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_restore(flags)	do { barrier(); setipl(flags); barrier(); } while(0)
+
+#define irqs_disabled()	(getipl() == IPL_MAX)
+
+/*
+ * TB routines..
+ */
+#define __tbi(nr,arg,arg1...)					\
+({								\
+	register unsigned long __r16 __asm__("$16") = (nr);	\
+	register unsigned long __r17 __asm__("$17"); arg;	\
+	__asm__ __volatile__(					\
+		"call_pal %3 #__tbi"				\
+		:"=r" (__r16),"=r" (__r17)			\
+		:"0" (__r16),"i" (PAL_tbi) ,##arg1		\
+		:"$0", "$1", "$22", "$23", "$24", "$25");	\
+})
+
+#define tbi(x,y)	__tbi(x,__r17=(y),"1" (__r17))
+#define tbisi(x)	__tbi(1,__r17=(x),"1" (__r17))
+#define tbisd(x)	__tbi(2,__r17=(x),"1" (__r17))
+#define tbis(x)		__tbi(3,__r17=(x),"1" (__r17))
+#define tbiap()		__tbi(-1, /* no second argument */)
+#define tbia()		__tbi(-2, /* no second argument */)
+
+/*
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
+ */
+
+static inline unsigned long
+__xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+__xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, int size)
+{
+	switch (size) {
+		case 1:
+			return __xchg_u8(ptr, x);
+		case 2:
+			return __xchg_u16(ptr, x);
+		case 4:
+			return __xchg_u32(ptr, x);
+		case 8:
+			return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define tas(ptr) (xchg((ptr),1))
+
+
+/* 
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ *
+ * The memory barrier should be placed in SMP only when we actually
+ * make the change. If we don't change anything (so if the returned
+ * prev is equal to old) then we aren't acquiring anything new and
+ * we don't need any memory barrier as far I can tell.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u8(volatile char *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u16(volatile short *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 1:
+			return __cmpxchg_u8(ptr, old, new);
+		case 2:
+			return __cmpxchg_u16(ptr, old, new);
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-alpha/termbits.h b/include/asm-alpha/termbits.h
new file mode 100644
index 000000000000..f4837fa29420
--- /dev/null
+++ b/include/asm-alpha/termbits.h
@@ -0,0 +1,186 @@
+#ifndef _ALPHA_TERMBITS_H
+#define _ALPHA_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VEOF 0
+#define VEOL 1
+#define VEOL2 2
+#define VERASE 3
+#define VWERASE 4
+#define VKILL 5
+#define VREPRINT 6
+#define VSWTC 7
+#define VINTR 8
+#define VQUIT 9
+#define VSUSP 10
+#define VSTART 12
+#define VSTOP 13
+#define VLNEXT 14
+#define VDISCARD 15
+#define VMIN 16
+#define VTIME 17
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+#define XTABS	01000000 /* Hmm.. Linux/i386 considers this part of TABDLY.. */
+
+/* c_cflag bit meaning */
+#define CBAUD	0000037
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ALPHA_TERMBITS_H */
diff --git a/include/asm-alpha/termios.h b/include/asm-alpha/termios.h
new file mode 100644
index 000000000000..1cfd27f0ad73
--- /dev/null
+++ b/include/asm-alpha/termios.h
@@ -0,0 +1,164 @@
+#ifndef _ALPHA_TERMIOS_H
+#define _ALPHA_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	4
+#define _VEOL	5
+#define _VTIME	5
+#define _VEOL2	6
+#define _VSWTC	7
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+/*	eof=^D		eol=\0		eol2=\0		erase=del
+	werase=^W	kill=^U		reprint=^R	sxtc=\0
+	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
+	start=^Q	stop=^S		lnext=^V	discard=^U
+	vmin=\1		vtime=\0
+*/
+#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+
+#define user_termio_to_kernel_termios(a_termios, u_termio)			\
+({										\
+	struct termios *k_termios = (a_termios);				\
+	struct termio k_termio;							\
+	int canon, ret;								\
+										\
+	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
+	if (!ret) {								\
+		/* Overwrite only the low bits.  */				\
+		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
+		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
+		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
+		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
+		canon = k_termio.c_lflag & ICANON;				\
+										\
+		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
+		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
+		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
+		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
+		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
+		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
+		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
+		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
+	}									\
+	ret;									\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(u_termio, a_termios)		\
+({									\
+	struct termios *k_termios = (a_termios);			\
+	struct termio k_termio;						\
+	int canon;							\
+									\
+	k_termio.c_iflag = k_termios->c_iflag;				\
+	k_termio.c_oflag = k_termios->c_oflag;				\
+	k_termio.c_cflag = k_termios->c_cflag;				\
+	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
+									\
+	k_termio.c_line = k_termios->c_line;				\
+	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
+	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
+	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
+	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
+	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
+	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
+	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
+	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
+									\
+	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _ALPHA_TERMIOS_H */
diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h
new file mode 100644
index 000000000000..d51491ed00b8
--- /dev/null
+++ b/include/asm-alpha/thread_info.h
@@ -0,0 +1,98 @@
+#ifndef _ALPHA_THREAD_INFO_H
+#define _ALPHA_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/types.h>
+#include <asm/hwrpb.h>
+#endif
+
+#ifndef __ASSEMBLY__
+struct thread_info {
+	struct pcb_struct	pcb;		/* palcode state */
+
+	struct task_struct	*task;		/* main task structure */
+	unsigned int		flags;		/* low level flags */
+	unsigned int		ieee_state;	/* see fpu.h */
+
+	struct exec_domain	*exec_domain;	/* execution domain */
+	mm_segment_t		addr_limit;	/* thread address space */
+	unsigned		cpu;		/* current CPU */
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	int bpt_nsaved;
+	unsigned long bpt_addr[2];		/* breakpoint handling  */
+	unsigned int bpt_insn[2];
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * Macros/functions for gaining access to the thread information structure.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$8");
+#define current_thread_info()  __current_thread_info
+
+/* Thread information allocation.  */
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define alloc_thread_info(tsk) \
+  ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags:
+ * - these are process state flags and used from assembly
+ * - pending work-to-be-done flags come first to fit in and immediate operand.
+ *
+ * TIF_SYSCALL_TRACE is known to be 0 via blbs.
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL	5	/* dik recursion lock */
+#define TIF_UAC_NOPRINT		6	/* see sysinfo.h */
+#define TIF_UAC_NOFIX		7
+#define TIF_UAC_SIGBUS		8
+#define TIF_MEMDIE		9
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+/* Work to do on interrupt/exception return.  */
+#define _TIF_WORK_MASK		(_TIF_NOTIFY_RESUME	\
+				 | _TIF_SIGPENDING	\
+				 | _TIF_NEED_RESCHED)
+
+/* Work to do on any return to userspace.  */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
+				 | _TIF_SYSCALL_TRACE)
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/include/asm-alpha/timex.h b/include/asm-alpha/timex.h
new file mode 100644
index 000000000000..afa0c45e3e98
--- /dev/null
+++ b/include/asm-alpha/timex.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/asm-alpha/timex.h
+ *
+ * ALPHA architecture timex specifications
+ */
+#ifndef _ASMALPHA_TIMEX_H
+#define _ASMALPHA_TIMEX_H
+
+/* With only one or two oddballs, we use the RTC as the ticker, selecting
+   the 32.768kHz reference clock, which nicely divides down to our HZ.  */
+#define CLOCK_TICK_RATE	32768
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity. 
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	cycles_t ret;
+	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
+	return ret;
+}
+
+#endif
diff --git a/include/asm-alpha/tlb.h b/include/asm-alpha/tlb.h
new file mode 100644
index 000000000000..aa91335533e0
--- /dev/null
+++ b/include/asm-alpha/tlb.h
@@ -0,0 +1,15 @@
+#ifndef _ALPHA_TLB_H
+#define _ALPHA_TLB_H
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, addr)	do { } while (0)
+
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#define __pte_free_tlb(tlb,pte)			pte_free(pte)
+#define __pmd_free_tlb(tlb,pmd)			pmd_free(pmd)
+ 
+#endif
diff --git a/include/asm-alpha/tlbflush.h b/include/asm-alpha/tlbflush.h
new file mode 100644
index 000000000000..9d484c1fdc82
--- /dev/null
+++ b/include/asm-alpha/tlbflush.h
@@ -0,0 +1,158 @@
+#ifndef _ALPHA_TLBFLUSH_H
+#define _ALPHA_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/compiler.h>
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __MMU_EXTERN_INLINE
+#endif
+
+extern void __load_new_mm_context(struct mm_struct *);
+
+
+/* Use a few helper functions to hide the ugly broken ASN
+   numbers on early Alphas (ev4 and ev45).  */
+
+__EXTERN_INLINE void
+ev4_flush_tlb_current(struct mm_struct *mm)
+{
+	__load_new_mm_context(mm);
+	tbiap();
+}
+
+__EXTERN_INLINE void
+ev5_flush_tlb_current(struct mm_struct *mm)
+{
+	__load_new_mm_context(mm);
+}
+
+/* Flush just one page in the current TLB set.  We need to be very
+   careful about the icache here, there is no way to invalidate a
+   specific icache page.  */
+
+__EXTERN_INLINE void
+ev4_flush_tlb_current_page(struct mm_struct * mm,
+			   struct vm_area_struct *vma,
+			   unsigned long addr)
+{
+	int tbi_flag = 2;
+	if (vma->vm_flags & VM_EXEC) {
+		__load_new_mm_context(mm);
+		tbi_flag = 3;
+	}
+	tbi(tbi_flag, addr);
+}
+
+__EXTERN_INLINE void
+ev5_flush_tlb_current_page(struct mm_struct * mm,
+			   struct vm_area_struct *vma,
+			   unsigned long addr)
+{
+	if (vma->vm_flags & VM_EXEC)
+		__load_new_mm_context(mm);
+	else
+		tbi(2, addr);
+}
+
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
+# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define flush_tlb_current		ev4_flush_tlb_current
+#  define flush_tlb_current_page	ev4_flush_tlb_current_page
+# else
+#  define flush_tlb_current		ev5_flush_tlb_current
+#  define flush_tlb_current_page	ev5_flush_tlb_current_page
+# endif
+#endif
+
+#ifdef __MMU_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __MMU_EXTERN_INLINE
+#endif
+
+/* Flush current user mapping.  */
+static inline void
+flush_tlb(void)
+{
+	flush_tlb_current(current->active_mm);
+}
+
+/* Flush someone else's user mapping.  */
+static inline void
+flush_tlb_other(struct mm_struct *mm)
+{
+	unsigned long *mmc = &mm->context[smp_processor_id()];
+	/* Check it's not zero first to avoid cacheline ping pong
+	   when possible.  */
+	if (*mmc) *mmc = 0;
+}
+
+/* Flush a specified range of user mapping page tables from TLB.
+   Although Alpha uses VPTE caches, this can be a nop, as Alpha does
+   not have finegrained tlb flushing, so it will flush VPTE stuff
+   during next flush_tlb_range.  */
+
+static inline void
+flush_tlb_pgtables(struct mm_struct *mm, unsigned long start,
+		   unsigned long end)
+{
+}
+
+#ifndef CONFIG_SMP
+/* Flush everything (kernel mapping may also have changed
+   due to vmalloc/vfree).  */
+static inline void flush_tlb_all(void)
+{
+	tbia();
+}
+
+/* Flush a specified user mapping.  */
+static inline void
+flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		flush_tlb_current(mm);
+	else
+		flush_tlb_other(mm);
+}
+
+/* Page-granular tlb flush.  */
+static inline void
+flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	if (mm == current->active_mm)
+		flush_tlb_current_page(mm, vma, addr);
+	else
+		flush_tlb_other(mm);
+}
+
+/* Flush a specified range of user mapping.  On the Alpha we flush
+   the whole user tlb.  */
+static inline void
+flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+#else /* CONFIG_SMP */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_range(struct vm_area_struct *, unsigned long,
+			    unsigned long);
+
+#endif /* CONFIG_SMP */
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#endif /* _ALPHA_TLBFLUSH_H */
diff --git a/include/asm-alpha/topology.h b/include/asm-alpha/topology.h
new file mode 100644
index 000000000000..eb740e280d9c
--- /dev/null
+++ b/include/asm-alpha/topology.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_ALPHA_TOPOLOGY_H
+#define _ASM_ALPHA_TOPOLOGY_H
+
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_NUMA
+static inline int cpu_to_node(int cpu)
+{
+	int node;
+	
+	if (!alpha_mv.cpuid_to_nid)
+		return 0;
+
+	node = alpha_mv.cpuid_to_nid(cpu);
+
+#ifdef DEBUG_NUMA
+	BUG_ON(node < 0);
+#endif
+
+	return node;
+}
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	cpumask_t node_cpu_mask = CPU_MASK_NONE;
+	int cpu;
+
+	for(cpu = 0; cpu < NR_CPUS; cpu++) {
+		if (cpu_online(cpu) && (cpu_to_node(cpu) == node))
+			cpu_set(cpu, node_cpu_mask);
+	}
+
+#ifdef DEBUG_NUMA
+	printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
+#endif
+
+	return node_cpu_mask;
+}
+
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+#else /* CONFIG_NUMA */
+# include <asm-generic/topology.h>
+#endif /* !CONFIG_NUMA */
+
+#endif /* _ASM_ALPHA_TOPOLOGY_H */
diff --git a/include/asm-alpha/types.h b/include/asm-alpha/types.h
new file mode 100644
index 000000000000..43264d219246
--- /dev/null
+++ b/include/asm-alpha/types.h
@@ -0,0 +1,63 @@
+#ifndef _ALPHA_TYPES_H
+#define _ALPHA_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned int umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long s64;
+typedef unsigned long u64;
+
+typedef u64 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_TYPES_H */
diff --git a/include/asm-alpha/uaccess.h b/include/asm-alpha/uaccess.h
new file mode 100644
index 000000000000..4c39ee750f38
--- /dev/null
+++ b/include/asm-alpha/uaccess.h
@@ -0,0 +1,517 @@
+#ifndef __ALPHA_UACCESS_H
+#define __ALPHA_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * Or at least it did once upon a time.  Nowadays it is a mask that
+ * defines which bits of the address space are off limits.  This is a
+ * wee bit faster than the above.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0UL })
+#define USER_DS		((mm_segment_t) { -0x40000000000UL })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs()  (current_thread_info()->addr_limit)
+#define get_ds()  (KERNEL_DS)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/*
+ * Is a address valid? This does a straightforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ */
+#define __access_ok(addr,size,segment) \
+	(((segment).seg & (addr | size | (addr+size))) == 0)
+
+#define access_ok(type,addr,size)				\
+({								\
+	__chk_user_ptr(addr);					\
+	__access_ok(((unsigned long)(addr)),(size),get_fs());	\
+})
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * As the alpha uses the same address space for kernel and user
+ * data, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs())
+#define get_user(x,ptr) \
+  __get_user_check((x),(ptr),sizeof(*(ptr)),get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+  
+/*
+ * The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to
+ * encode the bits we need for resolving the exception.  See the
+ * more extensive comments with fixup_inline_exception below for
+ * more information.
+ */
+
+extern void __get_user_unknown(void);
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err = 0;					\
+	unsigned long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	switch (size) {						\
+	  case 1: __get_user_8(ptr); break;			\
+	  case 2: __get_user_16(ptr); break;			\
+	  case 4: __get_user_32(ptr); break;			\
+	  case 8: __get_user_64(ptr); break;			\
+	  default: __get_user_unknown(); break;			\
+	}							\
+	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size,segment)				\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	if (__access_ok((unsigned long)__gu_addr,size,segment)) {	\
+		__gu_err = 0;						\
+		switch (size) {						\
+		  case 1: __get_user_8(__gu_addr); break;		\
+		  case 2: __get_user_16(__gu_addr); break;		\
+		  case 4: __get_user_32(__gu_addr); break;		\
+		  case 8: __get_user_64(__gu_addr); break;		\
+		  default: __get_user_unknown(); break;			\
+		}							\
+	}								\
+	(x) = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_64(addr)				\
+	__asm__("1: ldq %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#define __get_user_32(addr)				\
+	__asm__("1: ldl %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#ifdef __alpha_bwx__
+/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
+
+#define __get_user_16(addr)				\
+	__asm__("1: ldwu %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#define __get_user_8(addr)				\
+	__asm__("1: ldbu %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+#else
+/* Unfortunately, we can't get an unaligned access trap for the sub-word
+   load, so we have to do a general unaligned operation.  */
+
+#define __get_user_16(addr)						\
+{									\
+	long __gu_tmp;							\
+	__asm__("1: ldq_u %0,0(%3)\n"					\
+	"2:	ldq_u %1,1(%3)\n"					\
+	"	extwl %0,%3,%0\n"					\
+	"	extwh %1,%3,%1\n"					\
+	"	or %0,%1,%0\n"						\
+	"3:\n"								\
+	".section __ex_table,\"a\"\n"					\
+	"	.long 1b - .\n"						\
+	"	lda %0, 3b-1b(%2)\n"					\
+	"	.long 2b - .\n"						\
+	"	lda %0, 3b-2b(%2)\n"					\
+	".previous"							\
+		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
+		: "r"(addr), "2"(__gu_err));				\
+}
+
+#define __get_user_8(addr)						\
+	__asm__("1: ldq_u %0,0(%2)\n"					\
+	"	extbl %0,%2,%0\n"					\
+	"2:\n"								\
+	".section __ex_table,\"a\"\n"					\
+	"	.long 1b - .\n"						\
+	"	lda %0, 2b-1b(%1)\n"					\
+	".previous"							\
+		: "=&r"(__gu_val), "=r"(__gu_err)			\
+		: "r"(addr), "1"(__gu_err))
+#endif
+
+extern void __put_user_unknown(void);
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err = 0;					\
+	__chk_user_ptr(ptr);					\
+	switch (size) {						\
+	  case 1: __put_user_8(x,ptr); break;			\
+	  case 2: __put_user_16(x,ptr); break;			\
+	  case 4: __put_user_32(x,ptr); break;			\
+	  case 8: __put_user_64(x,ptr); break;			\
+	  default: __put_user_unknown(); break;			\
+	}							\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size,segment)				\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	if (__access_ok((unsigned long)__pu_addr,size,segment)) {	\
+		__pu_err = 0;						\
+		switch (size) {						\
+		  case 1: __put_user_8(x,__pu_addr); break;		\
+		  case 2: __put_user_16(x,__pu_addr); break;		\
+		  case 4: __put_user_32(x,__pu_addr); break;		\
+		  case 8: __put_user_64(x,__pu_addr); break;		\
+		  default: __put_user_unknown(); break;			\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+/*
+ * The "__put_user_xx()" macros tell gcc they read from memory
+ * instead of writing: this is because they do not write to
+ * any memory gcc knows about, so there are no aliasing issues
+ */
+#define __put_user_64(x,addr)					\
+__asm__ __volatile__("1: stq %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m" (__m(addr)), "rJ" (x), "0"(__pu_err))
+
+#define __put_user_32(x,addr)					\
+__asm__ __volatile__("1: stl %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+
+#ifdef __alpha_bwx__
+/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
+
+#define __put_user_16(x,addr)					\
+__asm__ __volatile__("1: stw %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+
+#define __put_user_8(x,addr)					\
+__asm__ __volatile__("1: stb %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+#else
+/* Unfortunately, we can't get an unaligned access trap for the sub-word
+   write, so we have to do a general unaligned operation.  */
+
+#define __put_user_16(x,addr)					\
+{								\
+	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
+	__asm__ __volatile__(					\
+	"1:	ldq_u %2,1(%5)\n"				\
+	"2:	ldq_u %1,0(%5)\n"				\
+	"	inswh %6,%5,%4\n"				\
+	"	inswl %6,%5,%3\n"				\
+	"	mskwh %2,%5,%2\n"				\
+	"	mskwl %1,%5,%1\n"				\
+	"	or %2,%4,%2\n"					\
+	"	or %1,%3,%1\n"					\
+	"3:	stq_u %2,1(%5)\n"				\
+	"4:	stq_u %1,0(%5)\n"				\
+	"5:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31, 5b-1b(%0)\n"				\
+	"	.long 2b - .\n"					\
+	"	lda $31, 5b-2b(%0)\n"				\
+	"	.long 3b - .\n"					\
+	"	lda $31, 5b-3b(%0)\n"				\
+	"	.long 4b - .\n"					\
+	"	lda $31, 5b-4b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err), "=&r"(__pu_tmp1),		\
+		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3),		\
+		  "=&r"(__pu_tmp4)				\
+		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
+}
+
+#define __put_user_8(x,addr)					\
+{								\
+	long __pu_tmp1, __pu_tmp2;				\
+	__asm__ __volatile__(					\
+	"1:	ldq_u %1,0(%4)\n"				\
+	"	insbl %3,%4,%2\n"				\
+	"	mskbl %1,%4,%1\n"				\
+	"	or %1,%2,%1\n"					\
+	"2:	stq_u %1,0(%4)\n"				\
+	"3:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31, 3b-1b(%0)\n"				\
+	"	.long 2b - .\n"					\
+	"	lda $31, 3b-2b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err),				\
+	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
+		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
+}
+#endif
+
+
+/*
+ * Complex access routines
+ */
+
+/* This little bit of silliness is to get the GP loaded for a function
+   that ordinarily wouldn't.  Otherwise we could have it done by the macro
+   directly, which can be optimized the linker.  */
+#ifdef MODULE
+#define __module_address(sym)		"r"(sym),
+#define __module_call(ra, arg, sym)	"jsr $" #ra ",(%" #arg ")," #sym
+#else
+#define __module_address(sym)
+#define __module_call(ra, arg, sym)	"bsr $" #ra "," #sym " !samegp"
+#endif
+
+extern void __copy_user(void);
+
+extern inline long
+__copy_tofrom_user_nocheck(void *to, const void *from, long len)
+{
+	register void * __cu_to __asm__("$6") = to;
+	register const void * __cu_from __asm__("$7") = from;
+	register long __cu_len __asm__("$0") = len;
+
+	__asm__ __volatile__(
+		__module_call(28, 3, __copy_user)
+		: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
+		: __module_address(__copy_user)
+		  "0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
+		: "$1","$2","$3","$4","$5","$28","memory");
+
+	return __cu_len;
+}
+
+extern inline long
+__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
+{
+	if (__access_ok((unsigned long)validate, len, get_fs()))
+		len = __copy_tofrom_user_nocheck(to, from, len);
+	return len;
+}
+
+#define __copy_to_user(to,from,n)					\
+({									\
+	__chk_user_ptr(to);						\
+	__copy_tofrom_user_nocheck((__force void *)(to),(from),(n));	\
+})
+#define __copy_from_user(to,from,n)					\
+({									\
+	__chk_user_ptr(from);						\
+	__copy_tofrom_user_nocheck((to),(__force void *)(from),(n));	\
+})
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+
+extern inline long
+copy_to_user(void __user *to, const void *from, long n)
+{
+	return __copy_tofrom_user((__force void *)to, from, n, to);
+}
+
+extern inline long
+copy_from_user(void *to, const void __user *from, long n)
+{
+	return __copy_tofrom_user(to, (__force void *)from, n, from);
+}
+
+extern void __do_clear_user(void);
+
+extern inline long
+__clear_user(void __user *to, long len)
+{
+	register void __user * __cl_to __asm__("$6") = to;
+	register long __cl_len __asm__("$0") = len;
+	__asm__ __volatile__(
+		__module_call(28, 2, __do_clear_user)
+		: "=r"(__cl_len), "=r"(__cl_to)
+		: __module_address(__do_clear_user)
+		  "0"(__cl_len), "1"(__cl_to)
+		: "$1","$2","$3","$4","$5","$28","memory");
+	return __cl_len;
+}
+
+extern inline long
+clear_user(void __user *to, long len)
+{
+	if (__access_ok((unsigned long)to, len, get_fs()))
+		len = __clear_user(to, len);
+	return len;
+}
+
+#undef __module_address
+#undef __module_call
+
+/* Returns: -EFAULT if exception before terminator, N if the entire
+   buffer filled, else strlen.  */
+
+extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len);
+
+extern inline long
+strncpy_from_user(char *to, const char __user *from, long n)
+{
+	long ret = -EFAULT;
+	if (__access_ok((unsigned long)from, 0, get_fs()))
+		ret = __strncpy_from_user(to, from, n);
+	return ret;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern long __strlen_user(const char __user *);
+
+extern inline long strlen_user(const char __user *str)
+{
+	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
+}
+
+/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
+ * a value greater than N if the limit would be exceeded, else strlen.  */
+extern long __strnlen_user(const char __user *, long);
+
+extern inline long strnlen_user(const char __user *str, long n)
+{
+	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
+}
+
+/*
+ * About the exception table:
+ *
+ * - insn is a 32-bit pc-relative offset from the faulting insn.
+ * - nextinsn is a 16-bit offset off of the faulting instruction
+ *   (not off of the *next* instruction as branches are).
+ * - errreg is the register in which to place -EFAULT.
+ * - valreg is the final target register for the load sequence
+ *   and will be zeroed.
+ *
+ * Either errreg or valreg may be $31, in which case nothing happens.
+ *
+ * The exception fixup information "just so happens" to be arranged
+ * as in a MEM format instruction.  This lets us emit our three
+ * values like so:
+ *
+ *      lda valreg, nextinsn(errreg)
+ *
+ */
+
+struct exception_table_entry
+{
+	signed int insn;
+	union exception_fixup {
+		unsigned unit;
+		struct {
+			signed int nextinsn : 16;
+			unsigned int errreg : 5;
+			unsigned int valreg : 5;
+		} bits;
+	} fixup;
+};
+
+/* Returns the new pc */
+#define fixup_exception(map_reg, fixup, pc)			\
+({								\
+	if ((fixup)->fixup.bits.valreg != 31)			\
+		map_reg((fixup)->fixup.bits.valreg) = 0;	\
+	if ((fixup)->fixup.bits.errreg != 31)			\
+		map_reg((fixup)->fixup.bits.errreg) = -EFAULT;	\
+	(pc) + (fixup)->fixup.bits.nextinsn;			\
+})
+
+
+#endif /* __ALPHA_UACCESS_H */
diff --git a/include/asm-alpha/ucontext.h b/include/asm-alpha/ucontext.h
new file mode 100644
index 000000000000..47578ab42152
--- /dev/null
+++ b/include/asm-alpha/ucontext.h
@@ -0,0 +1,13 @@
+#ifndef _ASMAXP_UCONTEXT_H
+#define _ASMAXP_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	old_sigset_t	  uc_osf_sigmask;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASMAXP_UCONTEXT_H */
diff --git a/include/asm-alpha/unaligned.h b/include/asm-alpha/unaligned.h
new file mode 100644
index 000000000000..a1d72846f61c
--- /dev/null
+++ b/include/asm-alpha/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_UNALIGNED_H
+#define __ALPHA_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif
diff --git a/include/asm-alpha/unistd.h b/include/asm-alpha/unistd.h
new file mode 100644
index 000000000000..c4e70e8617eb
--- /dev/null
+++ b/include/asm-alpha/unistd.h
@@ -0,0 +1,656 @@
+#ifndef _ALPHA_UNISTD_H
+#define _ALPHA_UNISTD_H
+
+#define __NR_osf_syscall	  0	/* not implemented */
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_osf_old_open	  5	/* not implemented */
+#define __NR_close		  6
+#define __NR_osf_wait4		  7
+#define __NR_osf_old_creat	  8	/* not implemented */
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_osf_execve		 11	/* not implemented */
+#define __NR_chdir		 12
+#define __NR_fchdir		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_brk		 17
+#define __NR_osf_getfsstat	 18	/* not implemented */
+#define __NR_lseek		 19
+#define __NR_getxpid		 20
+#define __NR_osf_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getxuid		 24
+#define __NR_exec_with_loader	 25	/* not implemented */
+#define __NR_ptrace		 26
+#define __NR_osf_nrecvmsg	 27	/* not implemented */
+#define __NR_osf_nsendmsg	 28	/* not implemented */
+#define __NR_osf_nrecvfrom	 29	/* not implemented */
+#define __NR_osf_naccept	 30	/* not implemented */
+#define __NR_osf_ngetpeername	 31	/* not implemented */
+#define __NR_osf_ngetsockname	 32	/* not implemented */
+#define __NR_access		 33
+#define __NR_osf_chflags	 34	/* not implemented */
+#define __NR_osf_fchflags	 35	/* not implemented */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_osf_old_stat	 38	/* not implemented */
+#define __NR_setpgid		 39
+#define __NR_osf_old_lstat	 40	/* not implemented */
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_osf_set_program_attributes	43
+#define __NR_osf_profil		 44	/* not implemented */
+#define __NR_open		 45
+#define __NR_osf_old_sigaction	 46	/* not implemented */
+#define __NR_getxgid		 47
+#define __NR_osf_sigprocmask	 48
+#define __NR_osf_getlogin	 49	/* not implemented */
+#define __NR_osf_setlogin	 50	/* not implemented */
+#define __NR_acct		 51
+#define __NR_sigpending		 52
+
+#define __NR_ioctl		 54
+#define __NR_osf_reboot		 55	/* not implemented */
+#define __NR_osf_revoke		 56	/* not implemented */
+#define __NR_symlink		 57
+#define __NR_readlink		 58
+#define __NR_execve		 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_osf_old_fstat	 62	/* not implemented */
+#define __NR_getpgrp		 63
+#define __NR_getpagesize	 64
+#define __NR_osf_mremap		 65	/* not implemented */
+#define __NR_vfork		 66
+#define __NR_stat		 67
+#define __NR_lstat		 68
+#define __NR_osf_sbrk		 69	/* not implemented */
+#define __NR_osf_sstk		 70	/* not implemented */
+#define __NR_mmap		 71	/* OSF/1 mmap is superset of Linux */
+#define __NR_osf_old_vadvise	 72	/* not implemented */
+#define __NR_munmap		 73
+#define __NR_mprotect		 74
+#define __NR_madvise		 75
+#define __NR_vhangup		 76
+#define __NR_osf_kmodcall	 77	/* not implemented */
+#define __NR_osf_mincore	 78	/* not implemented */
+#define __NR_getgroups		 79
+#define __NR_setgroups		 80
+#define __NR_osf_old_getpgrp	 81	/* not implemented */
+#define __NR_setpgrp		 82	/* BSD alias for setpgid */
+#define __NR_osf_setitimer	 83
+#define __NR_osf_old_wait	 84	/* not implemented */
+#define __NR_osf_table		 85	/* not implemented */
+#define __NR_osf_getitimer	 86
+#define __NR_gethostname	 87
+#define __NR_sethostname	 88
+#define __NR_getdtablesize	 89
+#define __NR_dup2		 90
+#define __NR_fstat		 91
+#define __NR_fcntl		 92
+#define __NR_osf_select		 93
+#define __NR_poll		 94
+#define __NR_fsync		 95
+#define __NR_setpriority	 96
+#define __NR_socket		 97
+#define __NR_connect		 98
+#define __NR_accept		 99
+#define __NR_getpriority	100
+#define __NR_send		101
+#define __NR_recv		102
+#define __NR_sigreturn		103
+#define __NR_bind		104
+#define __NR_setsockopt		105
+#define __NR_listen		106
+#define __NR_osf_plock		107	/* not implemented */
+#define __NR_osf_old_sigvec	108	/* not implemented */
+#define __NR_osf_old_sigblock	109	/* not implemented */
+#define __NR_osf_old_sigsetmask	110	/* not implemented */
+#define __NR_sigsuspend		111
+#define __NR_osf_sigstack	112
+#define __NR_recvmsg		113
+#define __NR_sendmsg		114
+#define __NR_osf_old_vtrace	115	/* not implemented */
+#define __NR_osf_gettimeofday	116
+#define __NR_osf_getrusage	117
+#define __NR_getsockopt		118
+
+#define __NR_readv		120
+#define __NR_writev		121
+#define __NR_osf_settimeofday	122
+#define __NR_fchown		123
+#define __NR_fchmod		124
+#define __NR_recvfrom		125
+#define __NR_setreuid		126
+#define __NR_setregid		127
+#define __NR_rename		128
+#define __NR_truncate		129
+#define __NR_ftruncate		130
+#define __NR_flock		131
+#define __NR_setgid		132
+#define __NR_sendto		133
+#define __NR_shutdown		134
+#define __NR_socketpair		135
+#define __NR_mkdir		136
+#define __NR_rmdir		137
+#define __NR_osf_utimes		138
+#define __NR_osf_old_sigreturn	139	/* not implemented */
+#define __NR_osf_adjtime	140	/* not implemented */
+#define __NR_getpeername	141
+#define __NR_osf_gethostid	142	/* not implemented */
+#define __NR_osf_sethostid	143	/* not implemented */
+#define __NR_getrlimit		144
+#define __NR_setrlimit		145
+#define __NR_osf_old_killpg	146	/* not implemented */
+#define __NR_setsid		147
+#define __NR_quotactl		148
+#define __NR_osf_oldquota	149	/* not implemented */
+#define __NR_getsockname	150
+
+#define __NR_osf_pid_block	153	/* not implemented */
+#define __NR_osf_pid_unblock	154	/* not implemented */
+
+#define __NR_sigaction		156
+#define __NR_osf_sigwaitprim	157	/* not implemented */
+#define __NR_osf_nfssvc		158	/* not implemented */
+#define __NR_osf_getdirentries	159
+#define __NR_osf_statfs		160
+#define __NR_osf_fstatfs	161
+
+#define __NR_osf_asynch_daemon	163	/* not implemented */
+#define __NR_osf_getfh		164	/* not implemented */	
+#define __NR_osf_getdomainname	165
+#define __NR_setdomainname	166
+
+#define __NR_osf_exportfs	169	/* not implemented */
+
+#define __NR_osf_alt_plock	181	/* not implemented */
+
+#define __NR_osf_getmnt		184	/* not implemented */
+
+#define __NR_osf_alt_sigpending	187	/* not implemented */
+#define __NR_osf_alt_setsid	188	/* not implemented */
+
+#define __NR_osf_swapon		199
+#define __NR_msgctl		200
+#define __NR_msgget		201
+#define __NR_msgrcv		202
+#define __NR_msgsnd		203
+#define __NR_semctl		204
+#define __NR_semget		205
+#define __NR_semop		206
+#define __NR_osf_utsname	207
+#define __NR_lchown		208
+#define __NR_osf_shmat		209
+#define __NR_shmctl		210
+#define __NR_shmdt		211
+#define __NR_shmget		212
+#define __NR_osf_mvalid		213	/* not implemented */
+#define __NR_osf_getaddressconf	214	/* not implemented */
+#define __NR_osf_msleep		215	/* not implemented */
+#define __NR_osf_mwakeup	216	/* not implemented */
+#define __NR_msync		217
+#define __NR_osf_signal		218	/* not implemented */
+#define __NR_osf_utc_gettime	219	/* not implemented */
+#define __NR_osf_utc_adjtime	220	/* not implemented */
+
+#define __NR_osf_security	222	/* not implemented */
+#define __NR_osf_kloadcall	223	/* not implemented */
+
+#define __NR_getpgid		233
+#define __NR_getsid		234
+#define __NR_sigaltstack	235
+#define __NR_osf_waitid		236	/* not implemented */
+#define __NR_osf_priocntlset	237	/* not implemented */
+#define __NR_osf_sigsendset	238	/* not implemented */
+#define __NR_osf_set_speculative	239	/* not implemented */
+#define __NR_osf_msfs_syscall	240	/* not implemented */
+#define __NR_osf_sysinfo	241
+#define __NR_osf_uadmin		242	/* not implemented */
+#define __NR_osf_fuser		243	/* not implemented */
+#define __NR_osf_proplist_syscall    244
+#define __NR_osf_ntp_adjtime	245	/* not implemented */
+#define __NR_osf_ntp_gettime	246	/* not implemented */
+#define __NR_osf_pathconf	247	/* not implemented */
+#define __NR_osf_fpathconf	248	/* not implemented */
+
+#define __NR_osf_uswitch	250	/* not implemented */
+#define __NR_osf_usleep_thread	251
+#define __NR_osf_audcntl	252	/* not implemented */
+#define __NR_osf_audgen		253	/* not implemented */
+#define __NR_sysfs		254
+#define __NR_osf_subsys_info	255	/* not implemented */
+#define __NR_osf_getsysinfo	256
+#define __NR_osf_setsysinfo	257
+#define __NR_osf_afs_syscall	258	/* not implemented */
+#define __NR_osf_swapctl	259	/* not implemented */
+#define __NR_osf_memcntl	260	/* not implemented */
+#define __NR_osf_fdatasync	261	/* not implemented */
+
+
+/*
+ * Linux-specific system calls begin at 300
+ */
+#define __NR_bdflush		300
+#define __NR_sethae		301
+#define __NR_mount		302
+#define __NR_old_adjtimex	303
+#define __NR_swapoff		304
+#define __NR_getdents		305
+#define __NR_create_module	306
+#define __NR_init_module	307
+#define __NR_delete_module	308
+#define __NR_get_kernel_syms	309
+#define __NR_syslog		310
+#define __NR_reboot		311
+#define __NR_clone		312
+#define __NR_uselib		313
+#define __NR_mlock		314
+#define __NR_munlock		315
+#define __NR_mlockall		316
+#define __NR_munlockall		317
+#define __NR_sysinfo		318
+#define __NR__sysctl		319
+/* 320 was sys_idle.  */
+#define __NR_oldumount		321
+#define __NR_swapon		322
+#define __NR_times		323
+#define __NR_personality	324
+#define __NR_setfsuid		325
+#define __NR_setfsgid		326
+#define __NR_ustat		327
+#define __NR_statfs		328
+#define __NR_fstatfs		329
+#define __NR_sched_setparam		330
+#define __NR_sched_getparam		331
+#define __NR_sched_setscheduler		332
+#define __NR_sched_getscheduler		333
+#define __NR_sched_yield		334
+#define __NR_sched_get_priority_max	335
+#define __NR_sched_get_priority_min	336
+#define __NR_sched_rr_get_interval	337
+#define __NR_afs_syscall		338
+#define __NR_uname			339
+#define __NR_nanosleep			340
+#define __NR_mremap			341
+#define __NR_nfsservctl			342
+#define __NR_setresuid			343
+#define __NR_getresuid			344
+#define __NR_pciconfig_read		345
+#define __NR_pciconfig_write		346
+#define __NR_query_module		347
+#define __NR_prctl			348
+#define __NR_pread64			349
+#define __NR_pwrite64			350
+#define __NR_rt_sigreturn		351
+#define __NR_rt_sigaction		352
+#define __NR_rt_sigprocmask		353
+#define __NR_rt_sigpending		354
+#define __NR_rt_sigtimedwait		355
+#define __NR_rt_sigqueueinfo		356
+#define __NR_rt_sigsuspend		357
+#define __NR_select			358
+#define __NR_gettimeofday		359
+#define __NR_settimeofday		360
+#define __NR_getitimer			361
+#define __NR_setitimer			362
+#define __NR_utimes			363
+#define __NR_getrusage			364
+#define __NR_wait4			365
+#define __NR_adjtimex			366
+#define __NR_getcwd			367
+#define __NR_capget			368
+#define __NR_capset			369
+#define __NR_sendfile			370
+#define __NR_setresgid			371
+#define __NR_getresgid			372
+#define __NR_dipc			373
+#define __NR_pivot_root			374
+#define __NR_mincore			375
+#define __NR_pciconfig_iobase		376
+#define __NR_getdents64			377
+#define __NR_gettid			378
+#define __NR_readahead			379
+/* 380 is unused */
+#define __NR_tkill			381
+#define __NR_setxattr			382
+#define __NR_lsetxattr			383
+#define __NR_fsetxattr			384
+#define __NR_getxattr			385
+#define __NR_lgetxattr			386
+#define __NR_fgetxattr			387
+#define __NR_listxattr			388
+#define __NR_llistxattr			389
+#define __NR_flistxattr			390
+#define __NR_removexattr		391
+#define __NR_lremovexattr		392
+#define __NR_fremovexattr		393
+#define __NR_futex			394
+#define __NR_sched_setaffinity		395     
+#define __NR_sched_getaffinity		396
+#define __NR_tuxcall			397
+#define __NR_io_setup			398
+#define __NR_io_destroy			399
+#define __NR_io_getevents		400
+#define __NR_io_submit			401
+#define __NR_io_cancel			402
+#define __NR_exit_group			405
+#define __NR_lookup_dcookie		406
+#define __NR_sys_epoll_create		407
+#define __NR_sys_epoll_ctl		408
+#define __NR_sys_epoll_wait		409
+#define __NR_remap_file_pages		410
+#define __NR_set_tid_address		411
+#define __NR_restart_syscall		412
+#define __NR_fadvise64			413
+#define __NR_timer_create		414
+#define __NR_timer_settime		415
+#define __NR_timer_gettime		416
+#define __NR_timer_getoverrun		417
+#define __NR_timer_delete		418
+#define __NR_clock_settime		419
+#define __NR_clock_gettime		420
+#define __NR_clock_getres		421
+#define __NR_clock_nanosleep		422
+#define __NR_semtimedop			423
+#define __NR_tgkill			424
+#define __NR_stat64			425
+#define __NR_lstat64			426
+#define __NR_fstat64			427
+#define __NR_vserver			428
+#define __NR_mbind			429
+#define __NR_get_mempolicy		430
+#define __NR_set_mempolicy		431
+#define __NR_mq_open			432
+#define __NR_mq_unlink			433
+#define __NR_mq_timedsend		434
+#define __NR_mq_timedreceive		435
+#define __NR_mq_notify			436
+#define __NR_mq_getsetattr		437
+#define __NR_waitid			438
+
+#define NR_SYSCALLS			439
+
+#if defined(__GNUC__)
+
+#define _syscall_return(type)						\
+	return (_sc_err ? errno = _sc_ret, _sc_ret = -1L : 0), (type) _sc_ret
+
+#define _syscall_clobbers						\
+	"$1", "$2", "$3", "$4", "$5", "$6", "$7", "$8",			\
+	"$22", "$23", "$24", "$25", "$27", "$28" 			\
+
+#define _syscall0(type, name)						\
+type name(void)								\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_19 __asm__("$19");			\
+									\
+		_sc_0 = __NR_##name;					\
+		__asm__("callsys # %0 %1 %2"				\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0)					\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#define _syscall1(type,name,type1,arg1)					\
+type name(type1 arg1)							\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_19 __asm__("$19");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		__asm__("callsys # %0 %1 %2 %3"				\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16)			\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1,type2 arg2)					\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_17 __asm__("$17");			\
+		register long _sc_19 __asm__("$19");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		_sc_17 = (long) (arg2);					\
+		__asm__("callsys # %0 %1 %2 %3 %4"			\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16), "r"(_sc_17)		\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1,type2 arg2,type3 arg3)				\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_17 __asm__("$17");			\
+		register long _sc_18 __asm__("$18");			\
+		register long _sc_19 __asm__("$19");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		_sc_17 = (long) (arg2);					\
+		_sc_18 = (long) (arg3);					\
+		__asm__("callsys # %0 %1 %2 %3 %4 %5"			\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16), "r"(_sc_17),		\
+			  "r"(_sc_18)					\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4)		 \
+{									 \
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_17 __asm__("$17");			\
+		register long _sc_18 __asm__("$18");			\
+		register long _sc_19 __asm__("$19");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		_sc_17 = (long) (arg2);					\
+		_sc_18 = (long) (arg3);					\
+		_sc_19 = (long) (arg4);					\
+		__asm__("callsys # %0 %1 %2 %3 %4 %5 %6"		\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16), "r"(_sc_17),		\
+			  "r"(_sc_18), "1"(_sc_19)			\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5)							 \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5)	\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_17 __asm__("$17");			\
+		register long _sc_18 __asm__("$18");			\
+		register long _sc_19 __asm__("$19");			\
+		register long _sc_20 __asm__("$20");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		_sc_17 = (long) (arg2);					\
+		_sc_18 = (long) (arg3);					\
+		_sc_19 = (long) (arg4);					\
+		_sc_20 = (long) (arg5);					\
+		__asm__("callsys # %0 %1 %2 %3 %4 %5 %6 %7"		\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16), "r"(_sc_17),		\
+			  "r"(_sc_18), "1"(_sc_19), "r"(_sc_20)		\
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5,type6,arg6)					 \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5, type6 arg6)\
+{									\
+	long _sc_ret, _sc_err;						\
+	{								\
+		register long _sc_0 __asm__("$0");			\
+		register long _sc_16 __asm__("$16");			\
+		register long _sc_17 __asm__("$17");			\
+		register long _sc_18 __asm__("$18");			\
+		register long _sc_19 __asm__("$19");			\
+		register long _sc_20 __asm__("$20");			\
+		register long _sc_21 __asm__("$21");			\
+									\
+		_sc_0 = __NR_##name;					\
+		_sc_16 = (long) (arg1);					\
+		_sc_17 = (long) (arg2);					\
+		_sc_18 = (long) (arg3);					\
+		_sc_19 = (long) (arg4);					\
+		_sc_20 = (long) (arg5);					\
+		_sc_21 = (long) (arg6);					\
+		__asm__("callsys # %0 %1 %2 %3 %4 %5 %6 %7 %8"		\
+			: "=r"(_sc_0), "=r"(_sc_19)			\
+			: "0"(_sc_0), "r"(_sc_16), "r"(_sc_17),		\
+			  "r"(_sc_18), "1"(_sc_19), "r"(_sc_20), "r"(_sc_21) \
+			: _syscall_clobbers);				\
+		_sc_ret = _sc_0, _sc_err = _sc_19;			\
+	}								\
+	_syscall_return(type);						\
+}
+
+#endif /* __LIBRARY__ && __GNUC__ */
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <asm/ptrace.h>
+
+static inline long open(const char * name, int mode, int flags)
+{
+	return sys_open(name, mode, flags);
+}
+
+static inline long dup(int fd)
+{
+	return sys_dup(fd);
+}
+
+static inline long close(int fd)
+{
+	return sys_close(fd);
+}
+
+static inline off_t lseek(int fd, off_t off, int whence)
+{
+	return sys_lseek(fd, off, whence);
+}
+
+static inline void _exit(int value)
+{
+	sys_exit(value);
+}
+
+#define exit(x) _exit(x)
+
+static inline long write(int fd, const char * buf, size_t nr)
+{
+	return sys_write(fd, buf, nr);
+}
+
+static inline long read(int fd, char * buf, size_t nr)
+{
+	return sys_read(fd, buf, nr);
+}
+
+extern int execve(char *, char **, char **);
+
+static inline long setsid(void)
+{
+	return sys_setsid();
+}
+
+static inline pid_t waitpid(int pid, int * wait_stat, int flags)
+{
+	return sys_wait4(pid, wait_stat, flags, NULL);
+}
+
+asmlinkage int sys_execve(char *ufilename, char **argv, char **envp,
+			unsigned long a3, unsigned long a4, unsigned long a5,
+			struct pt_regs regs);
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize,
+				void *restorer);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/* "Conditional" syscalls.  What we want is
+
+	__attribute__((weak,alias("sys_ni_syscall")))
+
+   but that raises the problem of what type to give the symbol.  If we use
+   a prototype, it'll conflict with the definition given in this file and
+   others.  If we use __typeof, we discover that not all symbols actually
+   have declarations.  If we use no prototype, then we get warnings from
+   -Wstrict-prototypes.  Ho hum.  */
+
+#define cond_syscall(x)  asm(".weak\t" #x "\n" #x " = sys_ni_syscall")
+
+#endif /* _ALPHA_UNISTD_H */
diff --git a/include/asm-alpha/user.h b/include/asm-alpha/user.h
new file mode 100644
index 000000000000..7e417fc9d491
--- /dev/null
+++ b/include/asm-alpha/user.h
@@ -0,0 +1,53 @@
+#ifndef _ALPHA_USER_H
+#define _ALPHA_USER_H
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ALPHA_USER_H */
diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h
new file mode 100644
index 000000000000..8ca4f6b2da19
--- /dev/null
+++ b/include/asm-alpha/vga.h
@@ -0,0 +1,51 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/io.h>
+
+#define VT_BUF_HAVE_RW
+#define VT_BUF_HAVE_MEMSETW
+#define VT_BUF_HAVE_MEMCPYW
+
+extern inline void scr_writew(u16 val, volatile u16 *addr)
+{
+	if (__is_ioaddr(addr))
+		__raw_writew(val, (volatile u16 __iomem *) addr);
+	else
+		*addr = val;
+}
+
+extern inline u16 scr_readw(volatile const u16 *addr)
+{
+	if (__is_ioaddr(addr))
+		return __raw_readw((volatile const u16 __iomem *) addr);
+	else
+		return *addr;
+}
+
+extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+{
+	if (__is_ioaddr(s))
+		memsetw_io((u16 __iomem *) s, c, count);
+	else
+		memsetw(s, c, count);
+}
+
+/* Do not trust that the usage will be correct; analyze the arguments.  */
+extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+
+/* ??? These are currently only used for downloading character sets.  As
+   such, they don't need memory barriers.  Is this all they are intended
+   to be used for?  */
+#define vga_readb(a)	readb((u8 __iomem *)(a))
+#define vga_writeb(v,a)	writeb(v, (u8 __iomem *)(a))
+
+#define VGA_MAP_MEM(x)	((unsigned long) ioremap(x, 0))
+
+#endif
diff --git a/include/asm-alpha/xor.h b/include/asm-alpha/xor.h
new file mode 100644
index 000000000000..5ee1c2bc0499
--- /dev/null
+++ b/include/asm-alpha/xor.h
@@ -0,0 +1,855 @@
+/*
+ * include/asm-alpha/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *);
+extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *, unsigned long *);
+extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *, unsigned long *, unsigned long *);
+
+extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
+				 unsigned long *);
+extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *);
+extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *,
+				 unsigned long *);
+extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *,
+				 unsigned long *, unsigned long *);
+
+asm("								\n\
+	.text							\n\
+	.align 3						\n\
+	.ent xor_alpha_2					\n\
+xor_alpha_2:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+2:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,8($17)						\n\
+	ldq $3,8($18)						\n\
+								\n\
+	ldq $4,16($17)						\n\
+	ldq $5,16($18)						\n\
+	ldq $6,24($17)						\n\
+	ldq $7,24($18)						\n\
+								\n\
+	ldq $19,32($17)						\n\
+	ldq $20,32($18)						\n\
+	ldq $21,40($17)						\n\
+	ldq $22,40($18)						\n\
+								\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+	ldq $25,56($17)						\n\
+	xor $0,$1,$0		# 7 cycles from $1 load		\n\
+								\n\
+	ldq $27,56($18)						\n\
+	xor $2,$3,$2						\n\
+	stq $0,0($17)						\n\
+	xor $4,$5,$4						\n\
+								\n\
+	stq $2,8($17)						\n\
+	xor $6,$7,$6						\n\
+	stq $4,16($17)						\n\
+	xor $19,$20,$19						\n\
+								\n\
+	stq $6,24($17)						\n\
+	xor $21,$22,$21						\n\
+	stq $19,32($17)						\n\
+	xor $23,$24,$23						\n\
+								\n\
+	stq $21,40($17)						\n\
+	xor $25,$27,$25						\n\
+	stq $23,48($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $25,56($17)						\n\
+	addq $17,64,$17						\n\
+	addq $18,64,$18						\n\
+	bgt $16,2b						\n\
+								\n\
+	ret							\n\
+	.end xor_alpha_2					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_3					\n\
+xor_alpha_3:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+3:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,8($17)						\n\
+								\n\
+	ldq $4,8($18)						\n\
+	ldq $6,16($17)						\n\
+	ldq $7,16($18)						\n\
+	ldq $21,24($17)						\n\
+								\n\
+	ldq $22,24($18)						\n\
+	ldq $24,32($17)						\n\
+	ldq $25,32($18)						\n\
+	ldq $5,8($19)						\n\
+								\n\
+	ldq $20,16($19)						\n\
+	ldq $23,24($19)						\n\
+	ldq $27,32($19)						\n\
+	nop							\n\
+								\n\
+	xor $0,$1,$1		# 8 cycles from $0 load		\n\
+	xor $3,$4,$4		# 6 cycles from $4 load		\n\
+	xor $6,$7,$7		# 6 cycles from $7 load		\n\
+	xor $21,$22,$22		# 5 cycles from $22 load	\n\
+								\n\
+	xor $1,$2,$2		# 9 cycles from $2 load		\n\
+	xor $24,$25,$25		# 5 cycles from $25 load	\n\
+	stq $2,0($17)						\n\
+	xor $4,$5,$5		# 6 cycles from $5 load		\n\
+								\n\
+	stq $5,8($17)						\n\
+	xor $7,$20,$20		# 7 cycles from $20 load	\n\
+	stq $20,16($17)						\n\
+	xor $22,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	stq $23,24($17)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+	stq $27,32($17)						\n\
+	nop							\n\
+								\n\
+	ldq $0,40($17)						\n\
+	ldq $1,40($18)						\n\
+	ldq $3,48($17)						\n\
+	ldq $4,48($18)						\n\
+								\n\
+	ldq $6,56($17)						\n\
+	ldq $7,56($18)						\n\
+	ldq $2,40($19)						\n\
+	ldq $5,48($19)						\n\
+								\n\
+	ldq $20,56($19)						\n\
+	xor $0,$1,$1		# 4 cycles from $1 load		\n\
+	xor $3,$4,$4		# 5 cycles from $4 load		\n\
+	xor $6,$7,$7		# 5 cycles from $7 load		\n\
+								\n\
+	xor $1,$2,$2		# 4 cycles from $2 load		\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	stq $2,40($17)						\n\
+	xor $7,$20,$20		# 4 cycles from $20 load	\n\
+								\n\
+	stq $5,48($17)						\n\
+	subq $16,1,$16						\n\
+	stq $20,56($17)						\n\
+	addq $19,64,$19						\n\
+								\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,3b						\n\
+	ret							\n\
+	.end xor_alpha_3					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_4					\n\
+xor_alpha_4:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+4:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,8($17)						\n\
+	ldq $5,8($18)						\n\
+	ldq $6,8($19)						\n\
+	ldq $7,8($20)						\n\
+								\n\
+	ldq $21,16($17)						\n\
+	ldq $22,16($18)						\n\
+	ldq $23,16($19)						\n\
+	ldq $24,16($20)						\n\
+								\n\
+	ldq $25,24($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $27,24($18)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,24($19)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $3,0($17)						\n\
+	xor $6,$7,$7						\n\
+	xor $21,$22,$22		# 7 cycles from $22 load	\n\
+	xor $5,$7,$7						\n\
+								\n\
+	stq $7,8($17)						\n\
+	xor $23,$24,$24		# 7 cycles from $24 load	\n\
+	ldq $2,32($17)						\n\
+	xor $22,$24,$24						\n\
+								\n\
+	ldq $3,32($18)						\n\
+	ldq $4,32($19)						\n\
+	ldq $5,32($20)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+								\n\
+	ldq $6,40($17)						\n\
+	ldq $7,40($18)						\n\
+	ldq $21,40($19)						\n\
+	ldq $22,40($20)						\n\
+								\n\
+	stq $24,16($17)						\n\
+	xor $0,$1,$1		# 9 cycles from $1 load		\n\
+	xor $2,$3,$3		# 5 cycles from $3 load		\n\
+	xor $27,$1,$1						\n\
+								\n\
+	stq $1,24($17)						\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+								\n\
+	ldq $25,48($19)						\n\
+	xor $3,$5,$5						\n\
+	ldq $27,48($20)						\n\
+	ldq $0,56($17)						\n\
+								\n\
+	ldq $1,56($18)						\n\
+	ldq $2,56($19)						\n\
+	xor $6,$7,$7		# 8 cycles from $6 load		\n\
+	ldq $3,56($20)						\n\
+								\n\
+	stq $5,32($17)						\n\
+	xor $21,$22,$22		# 8 cycles from $22 load	\n\
+	xor $7,$22,$22						\n\
+	xor $23,$24,$24		# 5 cycles from $24 load	\n\
+								\n\
+	stq $22,40($17)						\n\
+	xor $25,$27,$27		# 5 cycles from $27 load	\n\
+	xor $24,$27,$27						\n\
+	xor $0,$1,$1		# 5 cycles from $1 load		\n\
+								\n\
+	stq $27,48($17)						\n\
+	xor $2,$3,$3		# 4 cycles from $3 load		\n\
+	xor $1,$3,$3						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $3,56($17)						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,4b						\n\
+	ret							\n\
+	.end xor_alpha_4					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_5					\n\
+xor_alpha_5:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+5:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,0($21)						\n\
+	ldq $5,8($17)						\n\
+	ldq $6,8($18)						\n\
+	ldq $7,8($19)						\n\
+								\n\
+	ldq $22,8($20)						\n\
+	ldq $23,8($21)						\n\
+	ldq $24,16($17)						\n\
+	ldq $25,16($18)						\n\
+								\n\
+	ldq $27,16($19)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $28,16($20)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,16($21)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($17)						\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+								\n\
+	stq $4,0($17)						\n\
+	xor $5,$6,$6		# 7 cycles from $6 load		\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $6,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	ldq $2,24($18)						\n\
+	xor $22,$23,$23						\n\
+	ldq $3,24($19)						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $23,8($17)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+	ldq $4,24($20)						\n\
+	xor $28,$0,$0		# 7 cycles from $0 load		\n\
+								\n\
+	ldq $5,24($21)						\n\
+	xor $27,$0,$0						\n\
+	ldq $6,32($17)						\n\
+	ldq $7,32($18)						\n\
+								\n\
+	stq $0,16($17)						\n\
+	xor $1,$2,$2		# 6 cycles from $2 load		\n\
+	ldq $22,32($19)						\n\
+	xor $3,$4,$4		# 4 cycles from $4 load		\n\
+								\n\
+	ldq $23,32($20)						\n\
+	xor $2,$4,$4						\n\
+	ldq $24,32($21)						\n\
+	ldq $25,40($17)						\n\
+								\n\
+	ldq $27,40($18)						\n\
+	ldq $28,40($19)						\n\
+	ldq $0,40($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $5,24($17)						\n\
+	xor $6,$7,$7		# 7 cycles from $7 load		\n\
+	ldq $1,40($21)						\n\
+	ldq $2,48($17)						\n\
+								\n\
+	ldq $3,48($18)						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	ldq $4,48($19)						\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	ldq $5,48($20)						\n\
+	xor $22,$24,$24						\n\
+	ldq $6,48($21)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+								\n\
+	stq $24,32($17)						\n\
+	xor $27,$28,$28		# 8 cycles from $28 load	\n\
+	ldq $7,56($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+								\n\
+	ldq $22,56($18)						\n\
+	ldq $23,56($19)						\n\
+	ldq $24,56($20)						\n\
+	ldq $25,56($21)						\n\
+								\n\
+	xor $28,$1,$1						\n\
+	xor $2,$3,$3		# 9 cycles from $3 load		\n\
+	xor $3,$4,$4		# 9 cycles from $4 load		\n\
+	xor $5,$6,$6		# 8 cycles from $6 load		\n\
+								\n\
+	stq $1,40($17)						\n\
+	xor $4,$6,$6						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	stq $6,48($17)						\n\
+	xor $22,$24,$24						\n\
+	subq $16,1,$16						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $25,56($17)						\n\
+	addq $21,64,$21						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+								\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,5b						\n\
+	ret							\n\
+	.end xor_alpha_5					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_2				\n\
+xor_alpha_prefetch_2:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	.align 4						\n\
+2:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,8($17)						\n\
+	ldq $3,8($18)						\n\
+								\n\
+	ldq $4,16($17)						\n\
+	ldq $5,16($18)						\n\
+	ldq $6,24($17)						\n\
+	ldq $7,24($18)						\n\
+								\n\
+	ldq $19,32($17)						\n\
+	ldq $20,32($18)						\n\
+	ldq $21,40($17)						\n\
+	ldq $22,40($18)						\n\
+								\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+	ldq $25,56($17)						\n\
+	ldq $27,56($18)						\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $0,$1,$0		# 8 cycles from $1 load		\n\
+	ldq $31,256($18)					\n\
+	xor $2,$3,$2						\n\
+								\n\
+	stq $0,0($17)						\n\
+	xor $4,$5,$4						\n\
+	stq $2,8($17)						\n\
+	xor $6,$7,$6						\n\
+								\n\
+	stq $4,16($17)						\n\
+	xor $19,$20,$19						\n\
+	stq $6,24($17)						\n\
+	xor $21,$22,$21						\n\
+								\n\
+	stq $19,32($17)						\n\
+	xor $23,$24,$23						\n\
+	stq $21,40($17)						\n\
+	xor $25,$27,$25						\n\
+								\n\
+	stq $23,48($17)						\n\
+	subq $16,1,$16						\n\
+	stq $25,56($17)						\n\
+	addq $17,64,$17						\n\
+								\n\
+	addq $18,64,$18						\n\
+	bgt $16,2b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_2				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_3				\n\
+xor_alpha_prefetch_3:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	.align 4						\n\
+3:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,8($17)						\n\
+								\n\
+	ldq $4,8($18)						\n\
+	ldq $6,16($17)						\n\
+	ldq $7,16($18)						\n\
+	ldq $21,24($17)						\n\
+								\n\
+	ldq $22,24($18)						\n\
+	ldq $24,32($17)						\n\
+	ldq $25,32($18)						\n\
+	ldq $5,8($19)						\n\
+								\n\
+	ldq $20,16($19)						\n\
+	ldq $23,24($19)						\n\
+	ldq $27,32($19)						\n\
+	nop							\n\
+								\n\
+	xor $0,$1,$1		# 8 cycles from $0 load		\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+	xor $6,$7,$7		# 6 cycles from $7 load		\n\
+	xor $21,$22,$22		# 5 cycles from $22 load	\n\
+								\n\
+	xor $1,$2,$2		# 9 cycles from $2 load		\n\
+	xor $24,$25,$25		# 5 cycles from $25 load	\n\
+	stq $2,0($17)						\n\
+	xor $4,$5,$5		# 6 cycles from $5 load		\n\
+								\n\
+	stq $5,8($17)						\n\
+	xor $7,$20,$20		# 7 cycles from $20 load	\n\
+	stq $20,16($17)						\n\
+	xor $22,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	stq $23,24($17)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+	stq $27,32($17)						\n\
+	nop							\n\
+								\n\
+	ldq $0,40($17)						\n\
+	ldq $1,40($18)						\n\
+	ldq $3,48($17)						\n\
+	ldq $4,48($18)						\n\
+								\n\
+	ldq $6,56($17)						\n\
+	ldq $7,56($18)						\n\
+	ldq $2,40($19)						\n\
+	ldq $5,48($19)						\n\
+								\n\
+	ldq $20,56($19)						\n\
+	ldq $31,256($17)					\n\
+	ldq $31,256($18)					\n\
+	ldq $31,256($19)					\n\
+								\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	xor $3,$4,$4		# 5 cycles from $4 load		\n\
+	xor $6,$7,$7		# 5 cycles from $7 load		\n\
+	xor $1,$2,$2		# 4 cycles from $2 load		\n\
+								\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	xor $7,$20,$20		# 4 cycles from $20 load	\n\
+	stq $2,40($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $5,48($17)						\n\
+	addq $19,64,$19						\n\
+	stq $20,56($17)						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,3b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_3				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_4				\n\
+xor_alpha_prefetch_4:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+	ldq $31, 0($20)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+	ldq $31, 64($20)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+	ldq $31, 128($20)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	ldq $31, 192($20)					\n\
+	.align 4						\n\
+4:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,8($17)						\n\
+	ldq $5,8($18)						\n\
+	ldq $6,8($19)						\n\
+	ldq $7,8($20)						\n\
+								\n\
+	ldq $21,16($17)						\n\
+	ldq $22,16($18)						\n\
+	ldq $23,16($19)						\n\
+	ldq $24,16($20)						\n\
+								\n\
+	ldq $25,24($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $27,24($18)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,24($19)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $3,0($17)						\n\
+	xor $6,$7,$7						\n\
+	xor $21,$22,$22		# 7 cycles from $22 load	\n\
+	xor $5,$7,$7						\n\
+								\n\
+	stq $7,8($17)						\n\
+	xor $23,$24,$24		# 7 cycles from $24 load	\n\
+	ldq $2,32($17)						\n\
+	xor $22,$24,$24						\n\
+								\n\
+	ldq $3,32($18)						\n\
+	ldq $4,32($19)						\n\
+	ldq $5,32($20)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+								\n\
+	ldq $6,40($17)						\n\
+	ldq $7,40($18)						\n\
+	ldq $21,40($19)						\n\
+	ldq $22,40($20)						\n\
+								\n\
+	stq $24,16($17)						\n\
+	xor $0,$1,$1		# 9 cycles from $1 load		\n\
+	xor $2,$3,$3		# 5 cycles from $3 load		\n\
+	xor $27,$1,$1						\n\
+								\n\
+	stq $1,24($17)						\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	ldq $23,48($17)						\n\
+	xor $3,$5,$5						\n\
+								\n\
+	ldq $24,48($18)						\n\
+	ldq $25,48($19)						\n\
+	ldq $27,48($20)						\n\
+	ldq $0,56($17)						\n\
+								\n\
+	ldq $1,56($18)						\n\
+	ldq $2,56($19)						\n\
+	ldq $3,56($20)						\n\
+	xor $6,$7,$7		# 8 cycles from $6 load		\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $21,$22,$22		# 8 cycles from $22 load	\n\
+	ldq $31,256($18)					\n\
+	xor $7,$22,$22						\n\
+								\n\
+	ldq $31,256($19)					\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+	ldq $31,256($20)					\n\
+	xor $25,$27,$27		# 6 cycles from $27 load	\n\
+								\n\
+	stq $5,32($17)						\n\
+	xor $24,$27,$27						\n\
+	xor $0,$1,$1		# 7 cycles from $1 load		\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	stq $22,40($17)						\n\
+	xor $1,$3,$3						\n\
+	stq $27,48($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $3,56($17)						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,4b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_4				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_5				\n\
+xor_alpha_prefetch_5:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+	ldq $31, 0($20)						\n\
+	ldq $31, 0($21)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+	ldq $31, 64($20)					\n\
+	ldq $31, 64($21)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+	ldq $31, 128($20)					\n\
+	ldq $31, 128($21)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	ldq $31, 192($20)					\n\
+	ldq $31, 192($21)					\n\
+	.align 4						\n\
+5:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,0($21)						\n\
+	ldq $5,8($17)						\n\
+	ldq $6,8($18)						\n\
+	ldq $7,8($19)						\n\
+								\n\
+	ldq $22,8($20)						\n\
+	ldq $23,8($21)						\n\
+	ldq $24,16($17)						\n\
+	ldq $25,16($18)						\n\
+								\n\
+	ldq $27,16($19)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $28,16($20)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,16($21)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($17)						\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+								\n\
+	stq $4,0($17)						\n\
+	xor $5,$6,$6		# 7 cycles from $6 load		\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $6,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	ldq $2,24($18)						\n\
+	xor $22,$23,$23						\n\
+	ldq $3,24($19)						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $23,8($17)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+	ldq $4,24($20)						\n\
+	xor $28,$0,$0		# 7 cycles from $0 load		\n\
+								\n\
+	ldq $5,24($21)						\n\
+	xor $27,$0,$0						\n\
+	ldq $6,32($17)						\n\
+	ldq $7,32($18)						\n\
+								\n\
+	stq $0,16($17)						\n\
+	xor $1,$2,$2		# 6 cycles from $2 load		\n\
+	ldq $22,32($19)						\n\
+	xor $3,$4,$4		# 4 cycles from $4 load		\n\
+								\n\
+	ldq $23,32($20)						\n\
+	xor $2,$4,$4						\n\
+	ldq $24,32($21)						\n\
+	ldq $25,40($17)						\n\
+								\n\
+	ldq $27,40($18)						\n\
+	ldq $28,40($19)						\n\
+	ldq $0,40($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $5,24($17)						\n\
+	xor $6,$7,$7		# 7 cycles from $7 load		\n\
+	ldq $1,40($21)						\n\
+	ldq $2,48($17)						\n\
+								\n\
+	ldq $3,48($18)						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	ldq $4,48($19)						\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	ldq $5,48($20)						\n\
+	xor $22,$24,$24						\n\
+	ldq $6,48($21)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+								\n\
+	stq $24,32($17)						\n\
+	xor $27,$28,$28		# 8 cycles from $28 load	\n\
+	ldq $7,56($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+								\n\
+	ldq $22,56($18)						\n\
+	ldq $23,56($19)						\n\
+	ldq $24,56($20)						\n\
+	ldq $25,56($21)						\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $28,$1,$1						\n\
+	ldq $31,256($18)					\n\
+	xor $2,$3,$3		# 9 cycles from $3 load		\n\
+								\n\
+	ldq $31,256($19)					\n\
+	xor $3,$4,$4		# 9 cycles from $4 load		\n\
+	ldq $31,256($20)					\n\
+	xor $5,$6,$6		# 8 cycles from $6 load		\n\
+								\n\
+	stq $1,40($17)						\n\
+	xor $4,$6,$6						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	stq $6,48($17)						\n\
+	xor $22,$24,$24						\n\
+	ldq $31,256($21)					\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $25,56($17)						\n\
+	subq $16,1,$16						\n\
+	addq $21,64,$21						\n\
+	addq $20,64,$20						\n\
+								\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,5b						\n\
+								\n\
+	ret							\n\
+	.end xor_alpha_prefetch_5				\n\
+");
+
+static struct xor_block_template xor_block_alpha = {
+	.name	= "alpha",
+	.do_2	= xor_alpha_2,
+	.do_3	= xor_alpha_3,
+	.do_4	= xor_alpha_4,
+	.do_5	= xor_alpha_5,
+};
+
+static struct xor_block_template xor_block_alpha_prefetch = {
+	.name	= "alpha prefetch",
+	.do_2	= xor_alpha_prefetch_2,
+	.do_3	= xor_alpha_prefetch_3,
+	.do_4	= xor_alpha_prefetch_4,
+	.do_5	= xor_alpha_prefetch_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_alpha);		\
+		xor_speed(&xor_block_alpha_prefetch);	\
+	} while (0)
+
+/* Force the use of alpha_prefetch if EV6, as it is significantly
+   faster in the cold cache case.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	(implver() == IMPLVER_EV6 ? &xor_block_alpha_prefetch : FASTEST)
diff --git a/include/asm-arm/a.out.h b/include/asm-arm/a.out.h
new file mode 100644
index 000000000000..3e5fe64c4394
--- /dev/null
+++ b/include/asm-arm/a.out.h
@@ -0,0 +1,39 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <asm/types.h>
+
+struct exec
+{
+  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
+  __u32 a_text;		/* length of text, in bytes */
+  __u32 a_data;		/* length of data, in bytes */
+  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
+  __u32 a_syms;		/* length of symbol table data in file, in bytes */
+  __u32 a_entry;	/* start address */
+  __u32 a_trsize;	/* length of relocation info for text, in bytes */
+  __u32 a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a)	(0x00008000)
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#define M_ARM 103
+
+#ifdef __KERNEL__
+#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+			 TASK_SIZE : TASK_SIZE_26)
+#endif
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT	(0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-arm/apm.h b/include/asm-arm/apm.h
new file mode 100644
index 000000000000..3a50eb759c28
--- /dev/null
+++ b/include/asm-arm/apm.h
@@ -0,0 +1,65 @@
+/* -*- linux-c -*-
+ *
+ * (C) 2003 zecke@handhelds.org
+ *
+ * GPL version 2
+ *
+ * based on arch/arm/kernel/apm.c
+ * factor out the information needed by architectures to provide
+ * apm status
+ *
+ *
+ */
+#ifndef ARM_ASM_SA1100_APM_H
+#define ARM_ASM_SA1100_APM_H
+
+#include <linux/config.h>
+#include <linux/apm_bios.h>
+
+/*
+ * This structure gets filled in by the machine specific 'get_power_status'
+ * implementation.  Any fields which are not set default to a safe value.
+ */
+struct apm_power_info {
+	unsigned char	ac_line_status;
+#define APM_AC_OFFLINE			0
+#define APM_AC_ONLINE			1
+#define APM_AC_BACKUP			2
+#define APM_AC_UNKNOWN			0xff
+
+	unsigned char	battery_status;
+#define APM_BATTERY_STATUS_HIGH		0
+#define APM_BATTERY_STATUS_LOW		1
+#define APM_BATTERY_STATUS_CRITICAL	2
+#define APM_BATTERY_STATUS_CHARGING	3
+#define APM_BATTERY_STATUS_NOT_PRESENT	4
+#define APM_BATTERY_STATUS_UNKNOWN	0xff
+
+	unsigned char	battery_flag;
+#define APM_BATTERY_FLAG_HIGH		(1 << 0)
+#define APM_BATTERY_FLAG_LOW		(1 << 1)
+#define APM_BATTERY_FLAG_CRITICAL	(1 << 2)
+#define APM_BATTERY_FLAG_CHARGING	(1 << 3)
+#define APM_BATTERY_FLAG_NOT_PRESENT	(1 << 7)
+#define APM_BATTERY_FLAG_UNKNOWN	0xff
+
+	int		battery_life;
+	int		time;
+	int		units;
+#define APM_UNITS_MINS			0
+#define APM_UNITS_SECS			1
+#define APM_UNITS_UNKNOWN		-1
+
+};
+
+/*
+ * This allows machines to provide their own "apm get power status" function.
+ */
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+/*
+ * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
+ */
+void apm_queue_event(apm_event_t event);
+
+#endif
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/include/asm-arm/arch-cl7500/acornfb.h
new file mode 100644
index 000000000000..3867231a4470
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/acornfb.h
@@ -0,0 +1,34 @@
+#include <linux/config.h>
+#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int bandwidth;
+  
+	vidc->control |= VIDC20_CTRL_PIX_CK;
+
+	/* Calculate bandwidth */
+	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
+
+	/* Encode bandwidth as VIDC20 setting */
+	if (bandwidth > 16667*2)
+		vidc->control |= VIDC20_CTRL_FIFO_16;
+	else if (bandwidth > 13333*2)
+		vidc->control |= VIDC20_CTRL_FIFO_20;
+	else if (bandwidth > 11111*2)
+		vidc->control |= VIDC20_CTRL_FIFO_24;
+	else
+		vidc->control |= VIDC20_CTRL_FIFO_28;
+
+	vidc->pll_ctl  = 0x2020;
+}
+
+#ifdef CONFIG_CHRONTEL_7003
+#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
+#else
+#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
+#endif
+
+#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
new file mode 100644
index 000000000000..a5d489d7955a
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/debug-macro.S
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-cl7500/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldrb	\rd, [\rx, #0x14]
+		tst	\rd, #0x20
+		beq	1001b
+		.endm
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
new file mode 100644
index 000000000000..1d6a8829d327
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/dma.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	0
+
+#define DMA_S0			0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
new file mode 100644
index 000000000000..686f413f82d6
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/entry-macro.S
@@ -0,0 +1,3 @@
+
+#include <asm/hardware/entry-macro-iomd.S>
+
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h
new file mode 100644
index 000000000000..2339b764f69f
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/hardware.h
@@ -0,0 +1,71 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the 
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/arch/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define ISA_START		0x0c000000	/* ISA */
+#define ISA_SIZE		0x00010000
+#define ISA_BASE		0xe1000000
+
+#define FLASH_START		0x01000000	/* XXX */
+#define FLASH_SIZE		0x01000000
+#define FLASH_BASE		0xe2000000
+
+#define LED_START		0x0302B000
+#define LED_SIZE		0x00001000
+#define LED_BASE		0xe3000000
+#define LED_ADDRESS		(LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define FLUSH_BASE		0xdf000000
+
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+
+#define FLUSH_BASE_PHYS		0x00000000	/* ROM */
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO		0x80400000
+
+#endif
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
new file mode 100644
index 000000000000..f0113bc75630
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/io.h
@@ -0,0 +1,253 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/io.h
+ *  from linux/include/asm-arm/arch-rpc/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port << 2));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port << 2));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)			__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h
new file mode 100644
index 000000000000..4b286331f3f8
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/irq.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-cl7500/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ *   10-10-1996	RMK	Brought up to date with arch-sa110eval
+ *   22-08-1998	RMK	Restructured IRQ routines
+ *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+	if (irq == IRQ_ISA) {
+		int isabits = *((volatile unsigned int *)0xe002b700);
+		if (isabits == 0) {
+			printk("Spurious ISA IRQ!\n");
+			return irq;
+		}
+		irq = IRQ_ISA_BASE;
+		while (!(isabits & 1)) {
+			irq++;
+			isabits >>= 1;
+		}
+	}
+
+	return irq;
+}
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h
new file mode 100644
index 000000000000..f20996eadf19
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2		0
+#define IRQ_INT1		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_FORCE		7
+#define IRQ_INT8		8
+#define IRQ_ISA			9
+#define IRQ_INT6		10
+#define IRQ_INT5		11
+#define IRQ_INT4		12
+#define IRQ_INT3		13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define IRQ_IOP0		24
+#define IRQ_IOP1		25
+#define IRQ_IOP2		26
+#define IRQ_IOP3		27
+#define IRQ_IOP4		28
+#define IRQ_IOP5		29
+#define IRQ_IOP6		30
+#define IRQ_IOP7		31
+
+#define IRQ_MOUSERX		40
+#define IRQ_MOUSETX		41
+#define IRQ_ADC			42
+#define IRQ_EVENT1		43
+#define IRQ_EVENT2		44
+
+#define IRQ_ISA_BASE		48
+#define IRQ_ISA_3		48
+#define IRQ_ISA_4		49
+#define IRQ_ISA_5		50
+#define IRQ_ISA_7		51
+#define IRQ_ISA_9		52
+#define IRQ_ISA_10		53
+#define IRQ_ISA_11		54
+#define IRQ_ISA_14		55	
+
+#define FIQ_INT9		0
+#define FIQ_INT5		1
+#define FIQ_INT6		4
+#define FIQ_INT8		6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
new file mode 100644
index 000000000000..9776bba8e585
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/memory.h
@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ *  20-Oct-1996	RMK	Created
+ *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
+ *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
+ *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
+ *  21-Mar-1999	RMK	Renamed to memory.h
+ *		RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x10000000UL)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-cl7500/param.h b/include/asm-arm/arch-cl7500/param.h
new file mode 100644
index 000000000000..974bf69fbb1a
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/param.h
@@ -0,0 +1,5 @@
+/*
+ *  linux/include/asm-arm/arch-cl7500/param.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h
new file mode 100644
index 000000000000..a9505d6a74d7
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/system.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode)			\
+	do {					\
+		iomd_writeb(0, IOMD_ROMCR0);	\
+		cpu_reset(0);			\
+	} while (0)
+
+#endif
diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h
new file mode 100644
index 000000000000..8a4175fc0106
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/timex.h
@@ -0,0 +1,13 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h
new file mode 100644
index 000000000000..68601b3e3b95
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/uncompress.h
@@ -0,0 +1,43 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static __inline__ void putc(char c)
+{
+	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20));
+	*((volatile unsigned int *)(SERBASE)) = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	int baud = 3686400 / (9600 * 32);
+
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h
new file mode 100644
index 000000000000..91883def4889
--- /dev/null
+++ b/include/asm-arm/arch-cl7500/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-cl7500/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/include/asm-arm/arch-clps711x/autcpu12.h
new file mode 100644
index 000000000000..1588a365f610
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/autcpu12.h
@@ -0,0 +1,78 @@
+/*
+ * AUTCPU12 specific defines
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_AUTCPU12_H
+#define __ASM_ARCH_AUTCPU12_H
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ */
+#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
+#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
+
+/*
+ * The flash bank is wired to chip select 0
+ */
+#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
+
+/* offset for device specific information structure */
+#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
+/*
+* Videomemory is the internal SRAM (CS 6)	
+*/
+#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
+#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
+
+/*
+* All special IO's are tied to CS1
+*/
+#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
+
+#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
+
+#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
+
+#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
+
+#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
+
+#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
+
+#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
+
+#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
+
+/* 
+* defines for smartmedia card access 
+*/
+#define AUTCPU12_SMC_RDY		(1<<2)
+#define AUTCPU12_SMC_ALE		(1<<3)
+#define AUTCPU12_SMC_CLE  		(1<<4)
+#define AUTCPU12_SMC_PORT_OFFSET	PBDR
+#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
+/*
+* defines for lcd contrast 
+*/
+#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
+#define	AUTCPU12_DPOT_CS		(1<<0)
+#define AUTCPU12_DPOT_CLK    		(1<<1)
+#define	AUTCPU12_DPOT_UD		(1<<2)
+
+#endif
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S
new file mode 100644
index 000000000000..bc0a5760722b
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/debug-macro.S
@@ -0,0 +1,46 @@
+/* linux/include/asm-arm/arch-clps711x/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #CLPS7111_PHYS_BASE
+		movne	\rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		add	\rx, \rx, #0x0000	@ UART1
+#else
+		add	\rx, \rx, #0x1000	@ UART2
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+		tst	\rx, #0x1000		@ UART2 does not have CTS here
+		bne	1002f
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 8		@ CTS
+		bne	1001b
+1002:
+		.endm
+
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
new file mode 100644
index 000000000000..3c4c5c843252
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/dma.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
new file mode 100644
index 000000000000..b31079a1d4a9
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/entry-macro.S
@@ -0,0 +1,51 @@
+/*
+ * include/asm-arm/arch-CLPS711x/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware/clps7111.h>
+
+		.macro	disable_fiq
+		.endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+		.macro	get_irqnr_and_base, irqnr, stat, base, mask
+		mov	\base, #CLPS7111_BASE
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #4
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+		movs	\stat, \stat, lsr #4
+		bne	1001f
+
+		add	\base, \base, #INTSR2 - INTSR1
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #16
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+
+1001:		tst	\stat, #255
+		addeq	\irqnr, \irqnr, #8
+		moveq	\stat, \stat, lsr #8
+		tst	\stat, #15
+		addeq	\irqnr, \irqnr, #4
+		moveq	\stat, \stat, lsr #4
+		tst	\stat, #3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\stat, \stat, lsr #2
+		tst	\stat, #1
+		addeq	\irqnr, \irqnr, #1
+		moveq	\stat, \stat, lsr #1
+		tst	\stat, #1			@ bit 0 should be set
+		.endm
+
+
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
new file mode 100644
index 000000000000..1386871e1a5a
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -0,0 +1,238 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+
+#define CLPS7111_VIRT_BASE	0xff000000
+#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7211_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7212_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE	0xfe000000
+#define SYSPLD_BASE		SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE		IO_BASE
+
+#endif
+
+
+#if  defined (CONFIG_ARCH_AUTCPU12)
+
+#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CS89712_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START   0x80000000
+#define REGISTER_SIZE    0x4000
+#define REGISTER_BASE    0xff000000
+
+#define ETHER_START      0x20000000
+#define ETHER_SIZE       0x1000
+#define ETHER_BASE       0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
+#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
+#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
+#define EDB_PD2_LCDEN		(1<<2)
+#define EDB_PD3_LCDBL		(1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CEIVA_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
+#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
+
+#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
+#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
+
+#define CEIVA_FLASH_SIZE        0x100000
+#define CEIVA_FLASH_WIDTH       2
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355	(0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST	(1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN		(1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL		(1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN	(1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN	(1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
new file mode 100644
index 000000000000..14d7e8da5453
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/io.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h
new file mode 100644
index 000000000000..76025dc87637
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/irqs.h
@@ -0,0 +1,53 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/irqs.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT			4
+#define IRQ_EINT1			5
+#define IRQ_EINT2			6
+#define IRQ_EINT3			7
+#define IRQ_TC1OI			8
+#define IRQ_TC2OI			9
+#define IRQ_RTCMI			10
+#define IRQ_TINT			11
+#define IRQ_UTXINT1			12
+#define IRQ_URXINT1			13
+#define IRQ_UMSINT			14
+#define IRQ_SSEOTI			15
+
+#define INT1_IRQS			(0x0000fff0)
+#define INT1_ACK_IRQS			(0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT			(16+0)	/* bit 0 */
+#define IRQ_SS2RX			(16+1)	/* bit 1 */
+#define IRQ_SS2TX			(16+2)	/* bit 2 */
+#define IRQ_UTXINT2			(16+12)	/* bit 12 */
+#define IRQ_URXINT2			(16+13)	/* bit 13 */
+
+#define INT2_IRQS			(0x30070000)
+#define INT2_ACK_IRQS			(0x00010000)
+
+#define NR_IRQS                         30
+
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
new file mode 100644
index 000000000000..bd978947db42
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/memory.h
@@ -0,0 +1,128 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0xc0000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#else
+
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory.  In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+#ifdef CONFIG_DISCONTIGMEM
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+		(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr) \
+			NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
+
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ * Given a kaddr, LOCAL_MAR_NR finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+#define NODE_MAX_MEM_SHIFT	24
+#define NODE_MAX_MEM_SIZE	(1<<NODE_MAX_MEM_SHIFT)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif
+
diff --git a/include/asm-arm/arch-clps711x/param.h b/include/asm-arm/arch-clps711x/param.h
new file mode 100644
index 000000000000..86f6bd29623d
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/param.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h
new file mode 100644
index 000000000000..960578a22a8e
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/syspld.h
@@ -0,0 +1,121 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/syspld.h
+ *
+ *  System Control PLD register definitions.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE	(0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off)	(off)
+#endif
+
+#define PLD_INT		SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ		(1 << 5)
+#define PLD_INT_UCB_IRQ		(1 << 1)
+#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
+
+#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT		(1 << 5)
+#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
+#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
+#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
+#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
+
+#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE		(1 << 1)
+#define PLD_KBD_EN		(1 << 0)
+
+#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN		(1 << 0)
+
+#define PLD_IO		SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
+#define PLD_IO_USER		(1 << 5)	/* user defined switch */
+#define PLD_IO_LED3		(1 << 4)
+#define PLD_IO_LED2		(1 << 3)
+#define PLD_IO_LED1		(1 << 2)
+#define PLD_IO_LED0		(1 << 1)
+#define PLD_IO_LEDEN		(1 << 0)
+
+#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN		(1 << 0)
+
+#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN		(1 << 0)
+
+#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN		(1 << 0)
+
+#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1		(1 << 6)
+#define PLD_AUD_DIV0		(1 << 5)
+#define PLD_AUD_CLK_SEL1	(1 << 4)
+#define PLD_AUD_CLK_SEL0	(1 << 3)
+#define PLD_AUD_MIC_PWR		(1 << 2)
+#define PLD_AUD_MIC_GAIN	(1 << 1)
+#define PLD_AUD_CODEC_EN	(1 << 0)
+
+#define PLD_CF		SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP		(1 << 5)
+#define PLD_CF1_SLEEP		(1 << 4)
+#define PLD_CF2_nPDREQ		(1 << 3)
+#define PLD_CF1_nPDREQ		(1 << 2)
+#define PLD_CF2_nIRQ		(1 << 1)
+#define PLD_CF1_nIRQ		(1 << 0)
+
+#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN		(1 << 2)
+#define PLD_SDC_WP		(1 << 1)
+#define PLD_SDC_CD		(1 << 0)
+
+#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3		(1 << 4)
+#define PLD_CODEC_IRQ2		(1 << 3)
+#define PLD_CODEC_IRQ1		(1 << 2)
+#define PLD_CODEC_EN		(1 << 0)
+
+#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP		(1 << 1)
+#define PLD_BRITE_DN		(1 << 0)
+
+#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN		(1 << 0)
+
+#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ		(1 << 1)
+#define PLD_TCH_EN		(1 << 0)
+
+#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2		(1 << 2)
+#define PLD_GPIO1		(1 << 1)
+#define PLD_GPIO0		(1 << 0)
+
+#endif
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
new file mode 100644
index 000000000000..2ab981fee37f
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/system.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/system.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/clps7111.h>
+
+static inline void arch_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov	r0, r0\n\
+	mov	r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h
new file mode 100644
index 000000000000..9cb27cd4e6ae
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/time.h
@@ -0,0 +1,48 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/time.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	do_leds();
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	clps711x_setup_timer();
+	timer_irq.handler = p720t_timer_interrupt;
+	setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h
new file mode 100644
index 000000000000..dcbb381da3dd
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/timex.h
+ *
+ *  Prospector 720T architecture timex specifications
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h
new file mode 100644
index 000000000000..7d0ab791b16c
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/uncompress.h
@@ -0,0 +1,67 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/config.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define barrier()		__asm__ __volatile__("": : :"memory")
+#define __raw_readl(p)		(*(unsigned long *)(p))
+#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	char c;
+
+	while ((c = *s++) != '\0') {
+		while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+			barrier();
+		clps_writel(c, UARTDRx);
+
+		if (c == '\n') {
+			while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+				barrier();
+			clps_writel('\r', UARTDRx);
+		}
+	}
+	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h
new file mode 100644
index 000000000000..42571ed5e493
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/vmalloc.h
@@ -0,0 +1,31 @@
+/*
+ *  linux/include/asm-arm/arch-clps711x/vmalloc.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
new file mode 100644
index 000000000000..dcd03a40c502
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+		.macro	addruart,rx
+		mov	\rx, #0xf0000000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #0x14]
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldrb	\rd, [\rx, #0x18]
+		tst	\rd, #0x10
+		beq	1001b
+		.endm
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
new file mode 100644
index 000000000000..d491776ac1cc
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 DMA definitions
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
new file mode 100644
index 000000000000..b12ca04f998c
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/entry-macro.S
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-ebsa110/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT		0xff000000	/* read */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
+	mov	\base, #IRQ_STAT
+	ldrb	\stat, [\base]			@ get interrupts
+	mov	\irqnr, #0
+	tst	\stat, #15
+	addeq	\irqnr, \irqnr, #4
+	moveq	\stat, \stat, lsr #4
+	tst	\stat, #3
+	addeq	\irqnr, \irqnr, #2
+	moveq	\stat, \stat, lsr #2
+	tst	\stat, #1
+	addeq	\irqnr, \irqnr, #1
+	moveq	\stat, \stat, lsr #1
+	tst	\stat, #1			@ bit 0 should be set
+	.endm
+
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h
new file mode 100644
index 000000000000..4e41c2358f4e
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/hardware.h
@@ -0,0 +1,66 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/hardware.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
+
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK1_PHYS		0xf2400000
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK4_PHYS		0xf3000000
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+#define ISAMEM_BASE		0xe0000000
+#define ISAIO_BASE		0xf0000000
+
+#define PIT_BASE		0xfc000000
+#define SOFT_BASE		0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
+
+#endif
+
diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h
new file mode 100644
index 000000000000..68e04c0bb3f7
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/io.h
@@ -0,0 +1,78 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/io.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8  val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8  val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8  __readb(void __iomem *addr);
+u16 __readw(void __iomem *addr);
+u32 __readl(void __iomem *addr);
+
+void __writeb(u8  val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line.  We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) 			__inb16(p)
+#define outb(v,p)		__outb16(v,p)
+#else
+#define inb(p)			__inb8(p)
+#define outb(v,p)		__outb8(v,p)
+#endif
+
+#define inw(p)			__inw(p)
+#define outw(v,p)		__outw(v,p)
+
+#define inl(p)			__inl(p)
+#define outl(v,p)		__outl(v,p)
+
+#define readb(b)		__readb(b)
+#define readw(b)		__readw(b)
+#define readl(b)		__readl(b)
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
+
+#define writeb(v,b)		__writeb(v,b)
+#define writew(v,b)		__writew(v,b)
+#define writel(v,b)		__writel(v,b)
+
+#define __arch_ioremap(cookie,sz,c,a)	((void __iomem *)(cookie))
+#define __arch_iounmap(cookie)		do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+#endif
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h
new file mode 100644
index 000000000000..ded9bd9d7b8b
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/irqs.h
@@ -0,0 +1,20 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS			8
+
+#define IRQ_EBSA110_PRINTER	0
+#define IRQ_EBSA110_COM1	1
+#define IRQ_EBSA110_COM2	2
+#define IRQ_EBSA110_ETHERNET	3
+#define IRQ_EBSA110_TIMER0	4
+#define IRQ_EBSA110_TIMER1	5
+#define IRQ_EBSA110_PCMCIA	6
+#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
new file mode 100644
index 000000000000..5a9493e12275
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/memory.h
@@ -0,0 +1,31 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x00000000UL)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#endif
diff --git a/include/asm-arm/arch-ebsa110/param.h b/include/asm-arm/arch-ebsa110/param.h
new file mode 100644
index 000000000000..be19b08d1c75
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/param.h
@@ -0,0 +1,4 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/param.h
+ */
+#define HZ	200
diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h
new file mode 100644
index 000000000000..d7c8fece0bc5
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/system.h
@@ -0,0 +1,39 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/system.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode)	cpu_reset(0x80000000)
+
+#endif
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h
new file mode 100644
index 000000000000..1e9ef045092b
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/timex.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE		47894000
+
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h
new file mode 100644
index 000000000000..eee95581a923
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/uncompress.h
@@ -0,0 +1,44 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/uncompress.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	unsigned long tmp1, tmp2;
+	__asm__ __volatile__(
+	"ldrb	%0, [%2], #1\n"
+"	teq	%0, #0\n"
+"	beq	3f\n"
+"1:	strb	%0, [%3]\n"
+"2:	ldrb	%1, [%3, #0x14]\n"
+"	and	%1, %1, #0x60\n"
+"	teq	%1, #0x60\n"
+"	bne	2b\n"
+"	teq	%0, #'\n'\n"
+"	moveq	%0, #'\r'\n"
+"	beq	1b\n"
+"	ldrb	%0, [%2], #1\n"
+"	teq	%0, #0\n"
+"	bne	1b\n"
+"3:	ldrb	%1, [%3, #0x14]\n"
+"	and	%1, %1, #0x60\n"
+"	teq	%1, #0x60\n"
+"	bne	3b"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (s), "r" (0xf0000be0) : "cc");
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h
new file mode 100644
index 000000000000..759659be109f
--- /dev/null
+++ b/include/asm-arm/arch-ebsa110/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa110/vmalloc.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
new file mode 100644
index 000000000000..237853db6e2f
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/debug-macro.S
@@ -0,0 +1,66 @@
+/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+	/* For NetWinder debugging */
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x7c000000	@ physical
+		movne	\rx, #0xff000000	@ virtual
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #0x5]
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldrb	\rd, [\rx, #0x6]
+		tst	\rd, #0x10
+		beq	1001b
+		.endm
+#else
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart,rx
+		mov	\rx, #dc21285_high
+		.if	dc21285_low
+		orr	\rx, \rx, #dc21285_low
+		.endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+#endif
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
new file mode 100644
index 000000000000..c43046eb8bc7
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/dma.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/dma.h
+ *
+ *  Architecture DMA routines
+ *
+ *  Copyright (C) 1998,1999 Russell King
+ *  Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ */
+#define MAX_DMA_ADDRESS		0xffffffff
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x)		(0+(x))
+#define _DC21285_DMA(x)		(8+(x))
+
+#define MAX_DMA_CHANNELS	10
+
+#define DMA_FLOPPY		_ISA_DMA(2)
+#define DMA_ISA_CASCADE		_ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
new file mode 100644
index 000000000000..db5729ff6349
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/entry-macro.S
@@ -0,0 +1,105 @@
+/*
+ * include/asm-arm/arch-footbridge/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware/dec21285.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #dc21285_high
+		.if	dc21285_low
+		orr	r4, r4, #dc21285_low
+		.endif
+		ldr	\irqstat, [r4, #0x180]		@ get interrupts
+
+		mov	\irqnr, #IRQ_SDRAMPARITY
+		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_RX
+		movne	\irqnr, #IRQ_CONRX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA1
+		movne	\irqnr, #IRQ_DMA1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA2
+		movne	\irqnr, #IRQ_DMA2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN0
+		movne	\irqnr, #IRQ_IN0
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN1
+		movne	\irqnr, #IRQ_IN1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN2
+		movne	\irqnr, #IRQ_IN2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN3
+		movne	\irqnr, #IRQ_IN3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI
+		movne	\irqnr, #IRQ_PCI
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
+		movne	\irqnr, #IRQ_DOORBELLHOST
+		bne     1001f
+
+		tst	\irqstat, #IRQ_MASK_I2OINPOST
+		movne	\irqnr, #IRQ_I2OINPOST
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER1
+		movne	\irqnr, #IRQ_TIMER1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER2
+		movne	\irqnr, #IRQ_TIMER2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER3
+		movne	\irqnr, #IRQ_TIMER3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_TX
+		movne	\irqnr, #IRQ_CONTX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_ABORT
+		movne	\irqnr, #IRQ_PCI_ABORT
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_SERR
+		movne	\irqnr, #IRQ_PCI_SERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
+		movne	\irqnr, #IRQ_DISCARD_TIMER
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_DPERR
+		movne	\irqnr, #IRQ_PCI_DPERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_PERR
+		movne	\irqnr, #IRQ_PCI_PERR
+1001:
+		.endm
+
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
new file mode 100644
index 000000000000..2ef2200f108c
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/hardware.h
@@ -0,0 +1,139 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+#include <asm/arch/memory.h>
+
+#ifdef CONFIG_ARCH_FOOTBRIDGE
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define FLUSH_SIZE		0x00100000
+#define FLUSH_BASE		0xf9000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#elif defined(CONFIG_ARCH_CO285)
+/*
+ * This is the COEBSA285 cut-down mapping
+ */
+#define PCIMEM_SIZE		0x80000000
+#define PCIMEM_BASE		0x80000000
+
+#define FLUSH_SIZE		0x00100000
+#define FLUSH_BASE		0x7e000000
+
+#define WFLUSH_SIZE		0x01000000
+#define WFLUSH_BASE		0x7d000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0x7cf00000
+
+#define XBUS_SIZE		0x00020000
+#define XBUS_BASE		0x7cee0000
+
+#define PCIO_SIZE		0x00010000
+#define PCIO_BASE		0x7ced0000
+
+#else
+
+#error "Undefined footbridge architecture"
+
+#endif
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define FLUSH_BASE_PHYS		0x50000000
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
new file mode 100644
index 000000000000..70576b17f922
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/io.h
@@ -0,0 +1,45 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/io.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   06-12-1997	RMK	Created.
+ *   07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		((a) + PCIMEM_BASE)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+	return p;
+}
+
+static inline void __iomem *___mem_isa(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a >= 16*1048576);
+	return p + PCIMEM_BASE;
+}
+#define __mem_pci(a)		___mem_pci(a)
+#define __mem_isa(a)		___mem_isa(a)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h
new file mode 100644
index 000000000000..3e766f1cecf1
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * linux/include/asm-arm/arch-ebsa285/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
+ *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS			36
+#define NR_DC21285_IRQS		16
+
+#define _ISA_IRQ(x)		(0 + (x))
+#define _ISA_INR(x)		((x) - 0)
+#define _DC21285_IRQ(x)		(16 + (x))
+#define _DC21285_INR(x)		((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX		_DC21285_IRQ(0)
+#define IRQ_CONTX		_DC21285_IRQ(1)
+#define IRQ_TIMER1		_DC21285_IRQ(2)
+#define IRQ_TIMER2		_DC21285_IRQ(3)
+#define IRQ_TIMER3		_DC21285_IRQ(4)
+#define IRQ_IN0			_DC21285_IRQ(5)
+#define IRQ_IN1			_DC21285_IRQ(6)
+#define IRQ_IN2			_DC21285_IRQ(7)
+#define IRQ_IN3			_DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
+#define IRQ_DMA1		_DC21285_IRQ(10)
+#define IRQ_DMA2		_DC21285_IRQ(11)
+#define IRQ_PCI			_DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
+#define IRQ_I2OINPOST		_DC21285_IRQ(14)
+#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
+#define IRQ_PCI_SERR		_DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
+#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
+#define IRQ_PCI_PERR		_DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER		_ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
+#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
+#define IRQ_ISA_UART2		_ISA_IRQ(3)
+#define IRQ_ISA_UART		_ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
+#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
+#define IRQ_ISA_2		_ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX	(1 << 2)
+#define IRQ_MASK_UART_TX	(1 << 3)
+#define IRQ_MASK_TIMER1		(1 << 4)
+#define IRQ_MASK_TIMER2		(1 << 5)
+#define IRQ_MASK_TIMER3		(1 << 6)
+#define IRQ_MASK_IN0		(1 << 8)
+#define IRQ_MASK_IN1		(1 << 9)
+#define IRQ_MASK_IN2		(1 << 10)
+#define IRQ_MASK_IN3		(1 << 11)
+#define IRQ_MASK_DOORBELLHOST	(1 << 15)
+#define IRQ_MASK_DMA1		(1 << 16)
+#define IRQ_MASK_DMA2		(1 << 17)
+#define IRQ_MASK_PCI		(1 << 18)
+#define IRQ_MASK_SDRAMPARITY	(1 << 24)
+#define IRQ_MASK_I2OINPOST	(1 << 25)
+#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR	(1 << 23)
+#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
+#define IRQ_MASK_PCI_DPERR	(1 << 28)
+#define IRQ_MASK_PCI_PERR	(1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10	IRQ_IN0
+#define IRQ_NETWINDER_ETHER100	IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
+#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ		IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
new file mode 100644
index 000000000000..d0466f9987d3
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/memory.h
@@ -0,0 +1,75 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
+ *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
+ *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
+ *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
+ *			Renamed to memory.h
+ *			Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x)	((x) - 0xe0000000)
+#define __bus_to_virt(x)	((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+#if defined(CONFIG_ARCH_FOOTBRIDGE)
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE		(0xbf000000UL)
+#define PAGE_OFFSET		(0xc0000000UL)
+
+#elif defined(CONFIG_ARCH_CO285)
+
+/* Task size and page offset at 1.5GB */
+#define TASK_SIZE		(0x5f000000UL)
+#define PAGE_OFFSET		(0x60000000UL)
+
+#else
+
+#error "Undefined footbridge architecture"
+
+#endif
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#endif
diff --git a/include/asm-arm/arch-ebsa285/param.h b/include/asm-arm/arch-ebsa285/param.h
new file mode 100644
index 000000000000..3827103b27a0
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/param.h
+ */
diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h
new file mode 100644
index 000000000000..bf91c695c4b5
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/system.h
@@ -0,0 +1,69 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/*
+		 * Jump into the ROM
+		 */
+		cpu_reset(0x41000000);
+	} else {
+		if (machine_is_netwinder()) {
+			/* open up the SuperIO chip
+			 */
+			outb(0x87, 0x370);
+			outb(0x87, 0x370);
+
+			/* aux function group 1 (logical device 7)
+			 */
+			outb(0x07, 0x370);
+			outb(0x07, 0x371);
+
+			/* set GP16 for WD-TIMER output
+			 */
+			outb(0xe6, 0x370);
+			outb(0x00, 0x371);
+
+			/* set a RED LED and toggle WD_TIMER for rebooting
+			 */
+			outb(0xc4, 0x338);
+		} else {
+			/* 
+			 * Force the watchdog to do a CPU reset.
+			 *
+			 * After making sure that the watchdog is disabled
+			 * (so we can change the timer registers) we first
+			 * enable the timer to autoreload itself.  Next, the
+			 * timer interval is set really short and any
+			 * current interrupt request is cleared (so we can
+			 * see an edge transition).  Finally, TIMER4 is
+			 * enabled as the watchdog.
+			 */
+			*CSR_SA110_CNTL &= ~(1 << 13);
+			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+					   TIMER_CNTL_AUTORELOAD |
+					   TIMER_CNTL_DIV16;
+			*CSR_TIMER4_LOAD = 0x2;
+			*CSR_TIMER4_CLR  = 0;
+			*CSR_SA110_CNTL |= (1 << 13);
+		}
+	}
+}
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h
new file mode 100644
index 000000000000..df60b3812d96
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/timex.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h
new file mode 100644
index 000000000000..c2fd84e2d90e
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/uncompress.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
+
+static __inline__ void putc(char c)
+{
+	if (machine_is_netwinder()) {
+		while ((SER0_BASE[5] & 0x60) != 0x60);
+		SER0_BASE[0] = c;
+	} else {
+		while (DC21285_BASE[6] & 8);
+		DC21285_BASE[0] = c;
+	}
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
new file mode 100644
index 000000000000..def705a3c209
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+
+#ifdef CONFIG_ARCH_FOOTBRIDGE
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#else
+#define VMALLOC_END       (PAGE_OFFSET + 0x20000000)
+#endif
diff --git a/include/asm-arm/arch-epxa10db/debug-macro.S b/include/asm-arm/arch-epxa10db/debug-macro.S
new file mode 100644
index 000000000000..1d11c51f498f
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/debug-macro.S
@@ -0,0 +1,41 @@
+/* linux/include/asm-arm/arch-epxa10db/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/arch/excalibur.h>
+#define UART00_TYPE
+#include <asm/arch/uart00.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldr	\rx, =EXC_UART00_BASE	@ physical base address
+		orrne	\rx, \rx, #0xff000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TD(0)]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_TSR(0)]
+		and 	\rd, \rd,  #UART_TSR_TX_LEVEL_MSK
+		cmp	\rd, #15
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_TSR(0)]
+		ands 	\rd, \rd,  #UART_TSR_TX_LEVEL_MSK
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-epxa10db/dma.h b/include/asm-arm/arch-epxa10db/dma.h
new file mode 100644
index 000000000000..5d97734d1077
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/dma.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-arm/arch-camelot/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-epxa10db/entry-macro.S b/include/asm-arm/arch-epxa10db/entry-macro.S
new file mode 100644
index 000000000000..de6ae08334e2
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * include/asm-arm/arch-epxa10db/entry-macro.S
+ *
+ * Low-level IRQ helper macros for epxa10db platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/arch/platform.h>
+#undef IRQ_MODE /* same name defined in asm/proc/ptrace.h */
+#include <asm/arch/int_ctrl00.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr	\irqstat, =INT_ID(IO_ADDRESS(EXC_INT_CTRL00_BASE))
+		ldr	\irqnr,[\irqstat]
+		cmp	\irqnr,#0
+		subne	\irqnr,\irqnr,#1
+
+		.endm
+
diff --git a/include/asm-arm/arch-epxa10db/ether00.h b/include/asm-arm/arch-epxa10db/ether00.h
new file mode 100644
index 000000000000..b737b8aabe2f
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/ether00.h
@@ -0,0 +1,482 @@
+#ifndef __ETHER00_H
+#define __ETHER00_H
+
+
+
+/*
+ * Register definitions for the Ethernet MAC
+ */
+
+/*
+ * Copyright (c) Altera Corporation 2000.
+ * All rights reserved.
+ */
+
+/*
+*	Structures for the DMA controller
+*/
+typedef struct fda_desc
+	{
+	struct fda_desc *	FDNext;
+	long				FDSystem;
+	long				FDStat;
+	short				FDLength;
+	short				FDCtl;
+	}FDA_DESC;
+
+typedef struct buf_desc
+	{
+	char *	BuffData;
+	short	BuffLength;
+	char	BDStat;
+	char	BDCtl;
+	}BUF_DESC;
+
+/*
+*	Control masks for the DMA controller
+*/
+#define FDCTL_BDCOUNT_MSK						(0x1F)
+#define FDCTL_BDCOUNT_OFST						(0)
+#define FDCTL_FRMOPT_MSK						(0x7C00)
+#define FDCTL_FRMOPT_OFST						(10)
+#define	FDCTL_COWNSFD_MSK						(0x8000)
+#define	FDCTL_COWNSFD_OFST						(15)
+
+#define BDCTL_RXBDSEQN_MSK						(0x7F)
+#define BDCTL_RXBDSEQN_OFST						(0)
+#define	BDCTL_COWNSBD_MSK						(0x80)
+#define	BDCTL_COWNSBD_OFST						(7)
+
+#define FDNEXT_EOL_MSK							(0x1)
+#define FDNEXT_EOL_OFST							(0)
+#define FDNEXT_EOL_POINTER_MSK					(0xFFFFFFF0)
+#define FDNEXT_EOL_POINTER_OFST					(4)
+
+#define ETHER_ARC_SIZE         (21)
+
+/*
+*	Register definitions and masks
+*/
+#define ETHER_DMA_CTL(base)							(ETHER00_TYPE (base + 0x100))
+#define ETHER_DMA_CTL_DMBURST_OFST				(2)
+#define ETHER_DMA_CTL_DMBURST_MSK				(0x1FC)
+#define ETHER_DMA_CTL_POWRMGMNT_OFST			(11)
+#define ETHER_DMA_CTL_POWRMGMNT_MSK				(0x1000)
+#define ETHER_DMA_CTL_TXBIGE_OFST				(14)
+#define ETHER_DMA_CTL_TXBIGE_MSK				(0x4000)
+#define ETHER_DMA_CTL_RXBIGE_OFST				(15)
+#define ETHER_DMA_CTL_RXBIGE_MSK				(0x8000)
+#define ETHER_DMA_CTL_TXWAKEUP_OFST				(16)
+#define ETHER_DMA_CTL_TXWAKEUP_MSK				(0x10000)
+#define ETHER_DMA_CTL_SWINTREQ_OFST				(17)
+#define ETHER_DMA_CTL_SWINTREQ_MSK				(0x20000)
+#define ETHER_DMA_CTL_INTMASK_OFST				(18)
+#define ETHER_DMA_CTL_INTMASK_MSK				(0x40000)
+#define ETHER_DMA_CTL_M66ENSTAT_OFST			(19)
+#define ETHER_DMA_CTL_M66ENSTAT_MSK				(0x80000)
+#define ETHER_DMA_CTL_RMTXINIT_OFST				(20)
+#define ETHER_DMA_CTL_RMTXINIT_MSK				(0x100000)
+#define ETHER_DMA_CTL_RMRXINIT_OFST				(21)
+#define ETHER_DMA_CTL_RMRXINIT_MSK				(0x200000)
+#define ETHER_DMA_CTL_RXALIGN_OFST				(22)
+#define ETHER_DMA_CTL_RXALIGN_MSK				(0xC00000)
+#define ETHER_DMA_CTL_RMSWRQ_OFST				(24)
+#define ETHER_DMA_CTL_RMSWRQ_MSK				(0x1000000)
+#define ETHER_DMA_CTL_RMEMBANK_OFST				(25)
+#define ETHER_DMA_CTL_RMEMBANK_MSK				(0x2000000)
+
+#define ETHER_TXFRMPTR(base)							(ETHER00_TYPE (base + 0x104))
+
+#define ETHER_TXTHRSH(base)							(ETHER00_TYPE (base + 0x308))
+
+#define ETHER_TXPOLLCTR(base)							(ETHER00_TYPE (base + 0x30c))
+
+#define	ETHER_BLFRMPTR(base)							(ETHER00_TYPE (base + 0x110))
+#define ETHER_BLFFRMPTR_EOL_OFST				(0)
+#define ETHER_BLFFRMPTR_EOL_MSK					(0x1)
+#define ETHER_BLFFRMPTR_ADDRESS_OFST			(4)
+#define ETHER_BLFFRMPTR_ADDRESS_MSK				(0xFFFFFFF0)
+
+#define ETHER_RXFRAGSIZE(base)						(ETHER00_TYPE (base + 0x114))
+#define	ETHER_RXFRAGSIZE_MINFRAG_OFST			(2)
+#define	ETHER_RXFRAGSIZE_MINFRAG_MSK			(0xFFC)
+#define	ETHER_RXFRAGSIZE_ENPACK_OFST			(15)
+#define	ETHER_RXFRAGSIZE_ENPACK_MSK				(0x8000)
+
+#define ETHER_INT_EN(base)							(ETHER00_TYPE (base + 0x118))
+#define ETHER_INT_EN_FDAEXEN_OFST				(0)
+#define ETHER_INT_EN_FDAEXEN_MSK				(0x1)
+#define ETHER_INT_EN_BLEXEN_OFST				(1)
+#define ETHER_INT_EN_BLEXN_MSK					(0x2)
+#define ETHER_INT_EN_STARGABTEN_OFST			(2)
+#define ETHER_INT_EN_STARGABTEN_MSK				(0x4)
+#define ETHER_INT_EN_RTARGABTEN_OFST			(3)
+#define ETHER_INT_EN_RTARGABTEN_MSK				(0x8)
+#define ETHER_INT_EN_RMASABTEN_OFST				(4)
+#define ETHER_INT_EN_RMASABTEN_MSK				(0x10)
+#define ETHER_INT_EN_SSYSERREN_OFST				(5)
+#define ETHER_INT_EN_SSYSERREN_MSK				(0x20)
+#define ETHER_INT_EN_DPARERREN_OFST				(6)
+#define ETHER_INT_EN_DPARERREN_MSK				(0x40)
+#define ETHER_INT_EN_EARNOTEN_OFST				(7)
+#define ETHER_INT_EN_EARNOTEN_MSK				(0x80)
+#define ETHER_INT_EN_DPARDEN_OFST				(8)
+#define ETHER_INT_EN_DPARDEN_MSK				(0x100)
+#define ETHER_INT_EN_DMPARERREN_OFST			(9)
+#define ETHER_INT_EN_DMPARERREN_MSK				(0x200)
+#define ETHER_INT_EN_TXCTLCMPEN_OFST			(10)
+#define ETHER_INT_EN_TXCTLCMPEN_MSK				(0x400)
+#define ETHER_INT_EN_NRABTEN_OFST				(11)
+#define ETHER_INT_EN_NRABTEN_MSK				(0x800)
+
+#define	ETHER_FDA_BAS(base)							(ETHER00_TYPE (base + 0x11C))
+#define ETHER_FDA_BAS_ADDRESS_OFST				(4)
+#define ETHER_FDA_BAS_ADDRESS_MSK				(0xFFFFFFF0)
+
+#define ETHER_FDA_LIM(base)							(ETHER00_TYPE (base + 0x120))
+#define ETHER_FDA_LIM_COUNT_OFST				(4)
+#define ETHER_FDA_LIM_COUNT_MSK					(0xFFF0)
+
+#define ETHER_INT_SRC(base)							(ETHER00_TYPE (base + 0x124))
+#define ETHER_INT_SRC_INTMACTX_OFST				(0)
+#define ETHER_INT_SRC_INTMACTX_MSK				(0x1)
+#define ETHER_INT_SRC_INTMACRX_OFST				(1)
+#define ETHER_INT_SRC_INTMACRX_MSK				(0x2)
+#define ETHER_INT_SRC_INTSBUS_OFST				(2)
+#define ETHER_INT_SRC_INTSBUS_MSK				(0x4)
+#define ETHER_INT_SRC_INTFDAEX_OFST				(3)
+#define ETHER_INT_SRC_INTFDAEX_MSK				(0x8)
+#define ETHER_INT_SRC_INTBLEX_OFST				(4)
+#define ETHER_INT_SRC_INTBLEX_MSK				(0x10)
+#define ETHER_INT_SRC_SWINT_OFST				(5)
+#define ETHER_INT_SRC_SWINT_MSK					(0x20)
+#define ETHER_INT_SRC_INTEARNOT_OFST			(6)
+#define ETHER_INT_SRC_INTEARNOT_MSK				(0x40)
+#define ETHER_INT_SRC_DMPARERR_OFST				(7)
+#define ETHER_INT_SRC_DMPARERR_MSK				(0x80)
+#define ETHER_INT_SRC_INTEXBD_OFST				(8)
+#define ETHER_INT_SRC_INTEXBD_MSK				(0x100)
+#define ETHER_INT_SRC_INTTXCTLCMP_OFST			(9)
+#define ETHER_INT_SRC_INTTXCTLCMP_MSK			(0x200)
+#define ETHER_INT_SRC_INTNRABT_OFST				(10)
+#define ETHER_INT_SRC_INTNRABT_MSK				(0x400)
+#define ETHER_INT_SRC_FDAEX_OFST				(11)
+#define ETHER_INT_SRC_FDAEX_MSK					(0x800)
+#define ETHER_INT_SRC_BLEX_OFST					(12)
+#define ETHER_INT_SRC_BLEX_MSK					(0x1000)
+#define ETHER_INT_SRC_DMPARERRSTAT_OFST			(13)
+#define ETHER_INT_SRC_DMPARERRSTAT_MSK			(0x2000)
+#define ETHER_INT_SRC_NRABT_OFST				(14)
+#define ETHER_INT_SRC_NRABT_MSK					(0x4000)
+#define ETHER_INT_SRC_INTLINK_OFST				(15)
+#define ETHER_INT_SRC_INTLINK_MSK				(0x8000)
+#define ETHER_INT_SRC_INTEXDEFER_OFST			(16)
+#define ETHER_INT_SRC_INTEXDEFER_MSK			(0x10000)
+#define ETHER_INT_SRC_INTRMON_OFST				(17)
+#define ETHER_INT_SRC_INTRMON_MSK				(0x20000)
+#define ETHER_INT_SRC_IRQ_MSK					(0x83FF)
+
+#define ETHER_PAUSECNT(base)							(ETHER00_TYPE (base + 0x40))
+#define ETHER_PAUSECNT_COUNT_OFST				(0)
+#define ETHER_PAUSECNT_COUNT_MSK				(0xFFFF)
+
+#define ETHER_REMPAUCNT(base)							(ETHER00_TYPE (base + 0x44))
+#define ETHER_REMPAUCNT_COUNT_OFST				(0)
+#define ETHER_REMPAUCNT_COUNT_MSK				(0xFFFF)
+
+#define ETHER_TXCONFRMSTAT(base)						(ETHER00_TYPE (base + 0x348))
+#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_OFST	(0)
+#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_MSK	(0x3FFFFF)
+
+#define ETHER_MAC_CTL(base)							(ETHER00_TYPE (base + 0))
+#define ETHER_MAC_CTL_HALTREQ_OFST				(0)
+#define ETHER_MAC_CTL_HALTREQ_MSK				(0x1)
+#define ETHER_MAC_CTL_HALTIMM_OFST				(1)
+#define ETHER_MAC_CTL_HALTIMM_MSK				(0x2)
+#define ETHER_MAC_CTL_RESET_OFST				(2)
+#define ETHER_MAC_CTL_RESET_MSK					(0x4)
+#define ETHER_MAC_CTL_FULLDUP_OFST				(3)
+#define ETHER_MAC_CTL_FULLDUP_MSK				(0x8)
+#define ETHER_MAC_CTL_MACLOOP_OFST				(4)
+#define ETHER_MAC_CTL_MACLOOP_MSK				(0x10)
+#define ETHER_MAC_CTL_CONN_OFST					(5)
+#define ETHER_MAC_CTL_CONN_MSK					(0x60)
+#define ETHER_MAC_CTL_LOOP10_OFST				(7)
+#define ETHER_MAC_CTL_LOOP10_MSK				(0x80)
+#define ETHER_MAC_CTL_LNKCHG_OFST				(8)
+#define ETHER_MAC_CTL_LNKCHG_MSK				(0x100)
+#define ETHER_MAC_CTL_MISSROLL_OFST				(10)
+#define ETHER_MAC_CTL_MISSROLL_MSK				(0x400)
+#define ETHER_MAC_CTL_ENMISSROLL_OFST			(13)
+#define ETHER_MAC_CTL_ENMISSROLL_MSK			(0x2000)
+#define ETHER_MAC_CTL_LINK10_OFST				(15)
+#define ETHER_MAC_CTL_LINK10_MSK				(0x8000)
+
+#define ETHER_ARC_CTL(base)							(ETHER00_TYPE (base + 0x4))
+#define	ETHER_ARC_CTL_STATIONACC_OFST			(0)
+#define	ETHER_ARC_CTL_STATIONACC_MSK			(0x1)
+#define	ETHER_ARC_CTL_GROUPACC_OFST				(1)
+#define	ETHER_ARC_CTL_GROUPACC_MSK				(0x2)
+#define	ETHER_ARC_CTL_BROADACC_OFST				(2)
+#define	ETHER_ARC_CTL_BROADACC_MSK				(0x4)
+#define	ETHER_ARC_CTL_NEGARC_OFST				(3)
+#define	ETHER_ARC_CTL_NEGARC_MSK				(0x8)
+#define	ETHER_ARC_CTL_COMPEN_OFST				(4)
+#define	ETHER_ARC_CTL_COMPEN_MSK				(0x10)
+
+#define ETHER_TX_CTL(base)							(ETHER00_TYPE (base + 0x8))
+#define ETHER_TX_CTL_TXEN_OFST					(0)
+#define ETHER_TX_CTL_TXEN_MSK					(0x1)
+#define ETHER_TX_CTL_TXHALT_OFST				(1)
+#define ETHER_TX_CTL_TXHALT_MSK					(0x2)
+#define ETHER_TX_CTL_NOPAD_OFST					(2)
+#define ETHER_TX_CTL_NOPAD_MSK					(0x4)
+#define ETHER_TX_CTL_NOCRC_OFST					(3)
+#define ETHER_TX_CTL_NOCRC_MSK					(0x8)
+#define ETHER_TX_CTL_FBACK_OFST					(4)
+#define ETHER_TX_CTL_FBACK_MSK					(0x10)
+#define ETHER_TX_CTL_NOEXDEF_OFST				(5)
+#define ETHER_TX_CTL_NOEXDEF_MSK				(0x20)
+#define ETHER_TX_CTL_SDPAUSE_OFST				(6)
+#define ETHER_TX_CTL_SDPAUSE_MSK				(0x40)
+#define ETHER_TX_CTL_MII10_OFST					(7)
+#define ETHER_TX_CTL_MII10_MSK					(0x80)
+#define ETHER_TX_CTL_ENUNDER_OFST				(8)
+#define ETHER_TX_CTL_ENUNDER_MSK				(0x100)
+#define ETHER_TX_CTL_ENEXDEFER_OFST				(9)
+#define ETHER_TX_CTL_ENEXDEFER_MSK				(0x200)
+#define ETHER_TX_CTL_ENLCARR_OFST				(10)
+#define ETHER_TX_CTL_ENLCARR_MSK				(0x400)
+#define ETHER_TX_CTL_ENEXCOLL_OFST				(11)
+#define ETHER_TX_CTL_ENEXCOLL_MSK				(0x800)
+#define ETHER_TX_CTL_ENLATECOLL_OFST				(12)
+#define ETHER_TX_CTL_ENLATECOLL_MSK				(0x1000)
+#define ETHER_TX_CTL_ENTXPAR_OFST				(13)
+#define ETHER_TX_CTL_ENTXPAR_MSK				(0x2000)
+#define ETHER_TX_CTL_ENCOMP_OFST				(14)
+#define ETHER_TX_CTL_ENCOMP_MSK					(0x4000)
+
+#define ETHER_TX_STAT(base)							(ETHER00_TYPE (base + 0xc))
+#define ETHER_TX_STAT_TXCOLL_OFST				(0)
+#define ETHER_TX_STAT_TXCOLL_MSK				(0xF)
+#define ETHER_TX_STAT_EXCOLL_OFST				(4)
+#define ETHER_TX_STAT_EXCOLL_MSK				(0x10)
+#define ETHER_TX_STAT_TXDEFER_OFST				(5)
+#define ETHER_TX_STAT_TXDEFER_MSK				(0x20)
+#define ETHER_TX_STAT_PAUSED_OFST				(6)
+#define ETHER_TX_STAT_PAUSED_MSK				(0x40)
+#define ETHER_TX_STAT_INTTX_OFST				(7)
+#define ETHER_TX_STAT_INTTX_MSK					(0x80)
+#define ETHER_TX_STAT_UNDER_OFST				(8)
+#define ETHER_TX_STAT_UNDER_MSK					(0x100)
+#define ETHER_TX_STAT_EXDEFER_OFST				(9)
+#define ETHER_TX_STAT_EXDEFER_MSK				(0x200)
+#define ETHER_TX_STAT_LCARR_OFST				(10)
+#define ETHER_TX_STAT_LCARR_MSK					(0x400)
+#define ETHER_TX_STAT_TX10STAT_OFST				(11)
+#define ETHER_TX_STAT_TX10STAT_MSK				(0x800)
+#define ETHER_TX_STAT_LATECOLL_OFST				(12)
+#define ETHER_TX_STAT_LATECOLL_MSK				(0x1000)
+#define ETHER_TX_STAT_TXPAR_OFST				(13)
+#define ETHER_TX_STAT_TXPAR_MSK					(0x2000)
+#define ETHER_TX_STAT_COMP_OFST					(14)
+#define ETHER_TX_STAT_COMP_MSK					(0x4000)
+#define ETHER_TX_STAT_TXHALTED_OFST				(15)
+#define ETHER_TX_STAT_TXHALTED_MSK				(0x8000)
+#define ETHER_TX_STAT_SQERR_OFST				(16)
+#define ETHER_TX_STAT_SQERR_MSK					(0x10000)
+#define ETHER_TX_STAT_TXMCAST_OFST				(17)
+#define ETHER_TX_STAT_TXMCAST_MSK				(0x20000)
+#define ETHER_TX_STAT_TXBCAST_OFST				(18)
+#define ETHER_TX_STAT_TXBCAST_MSK				(0x40000)
+#define ETHER_TX_STAT_VLAN_OFST					(19)
+#define ETHER_TX_STAT_VLAN_MSK					(0x80000)
+#define ETHER_TX_STAT_MACC_OFST					(20)
+#define ETHER_TX_STAT_MACC_MSK					(0x100000)
+#define ETHER_TX_STAT_TXPAUSE_OFST				(21)
+#define ETHER_TX_STAT_TXPAUSE_MSK				(0x200000)
+
+#define ETHER_RX_CTL(base)							(ETHER00_TYPE (base + 0x10))
+#define ETHER_RX_CTL_RXEN_OFST					(0)
+#define ETHER_RX_CTL_RXEN_MSK					(0x1)
+#define ETHER_RX_CTL_RXHALT_OFST				(1)
+#define ETHER_RX_CTL_RXHALT_MSK					(0x2)
+#define ETHER_RX_CTL_LONGEN_OFST				(2)
+#define ETHER_RX_CTL_LONGEN_MSK					(0x4)
+#define ETHER_RX_CTL_SHORTEN_OFST				(3)
+#define ETHER_RX_CTL_SHORTEN_MSK				(0x8)
+#define ETHER_RX_CTL_STRIPCRC_OFST				(4)
+#define ETHER_RX_CTL_STRIPCRC_MSK				(0x10)
+#define ETHER_RX_CTL_PASSCTL_OFST				(5)
+#define ETHER_RX_CTL_PASSCTL_MSK				(0x20)
+#define ETHER_RX_CTL_IGNORECRC_OFST				(6)
+#define ETHER_RX_CTL_IGNORECRC_MSK				(0x40)
+#define ETHER_RX_CTL_ENALIGN_OFST				(8)
+#define ETHER_RX_CTL_ENALIGN_MSK				(0x100)
+#define ETHER_RX_CTL_ENCRCERR_OFST				(9)
+#define ETHER_RX_CTL_ENCRCERR_MSK				(0x200)
+#define ETHER_RX_CTL_ENOVER_OFST				(10)
+#define ETHER_RX_CTL_ENOVER_MSK					(0x400)
+#define ETHER_RX_CTL_ENLONGERR_OFST				(11)
+#define ETHER_RX_CTL_ENLONGERR_MSK				(0x800)
+#define ETHER_RX_CTL_ENRXPAR_OFST				(13)
+#define ETHER_RX_CTL_ENRXPAR_MSK				(0x2000)
+#define ETHER_RX_CTL_ENGOOD_OFST				(14)
+#define ETHER_RX_CTL_ENGOOD_MSK					(0x4000)
+
+#define ETHER_RX_STAT(base)							(ETHER00_TYPE (base + 0x14))
+#define ETHER_RX_STAT_LENERR_OFST				(4)
+#define ETHER_RX_STAT_LENERR_MSK				(0x10)
+#define ETHER_RX_STAT_CTLRECD_OFST				(5)
+#define ETHER_RX_STAT_CTLRECD_MSK				(0x20)
+#define ETHER_RX_STAT_INTRX_OFST				(6)
+#define ETHER_RX_STAT_INTRX_MSK					(0x40)
+#define ETHER_RX_STAT_RX10STAT_OFST				(7)
+#define ETHER_RX_STAT_RX10STAT_MSK				(0x80)
+#define ETHER_RX_STAT_ALIGNERR_OFST				(8)
+#define ETHER_RX_STAT_ALIGNERR_MSK				(0x100)
+#define ETHER_RX_STAT_CRCERR_OFST				(9)
+#define ETHER_RX_STAT_CRCERR_MSK				(0x200)
+#define ETHER_RX_STAT_OVERFLOW_OFST				(10)
+#define ETHER_RX_STAT_OVERFLOW_MSK				(0x400)
+#define ETHER_RX_STAT_LONGERR_OFST				(11)
+#define ETHER_RX_STAT_LONGERR_MSK				(0x800)
+#define ETHER_RX_STAT_RXPAR_OFST				(13)
+#define ETHER_RX_STAT_RXPAR_MSK					(0x2000)
+#define ETHER_RX_STAT_GOOD_OFST					(14)
+#define ETHER_RX_STAT_GOOD_MSK					(0x4000)
+#define ETHER_RX_STAT_RXHALTED_OFST				(15)
+#define ETHER_RX_STAT_RXHALTED_MSK				(0x8000)
+#define ETHER_RX_STAT_RXMCAST_OFST				(17)
+#define ETHER_RX_STAT_RXMCAST_MSK				(0x10000)
+#define ETHER_RX_STAT_RXBCAST_OFST				(18)
+#define ETHER_RX_STAT_RXBCAST_MSK				(0x20000)
+#define ETHER_RX_STAT_RXVLAN_OFST				(19)
+#define ETHER_RX_STAT_RXVLAN_MSK				(0x40000)
+#define ETHER_RX_STAT_RXPAUSE_OFST				(20)
+#define ETHER_RX_STAT_RXPAUSE_MSK				(0x80000)
+#define ETHER_RX_STAT_ARCSTATUS_OFST				(21)
+#define ETHER_RX_STAT_ARCSTATUS_MSK				(0xF00000)
+#define ETHER_RX_STAT_ARCENT_OFST				(25)
+#define ETHER_RX_STAT_ARCENT_MSK				(0x1F000000)
+
+#define ETHER_MD_DATA(base)							(ETHER00_TYPE (base + 0x18))
+
+#define ETHER_MD_CA(base)								(ETHER00_TYPE (base + 0x1c))
+#define ETHER_MD_CA_ADDR_OFST					(0)
+#define ETHER_MD_CA_ADDR_MSK					(0x1F)
+#define ETHER_MD_CA_PHY_OFST					(5)
+#define ETHER_MD_CA_PHY_MSK					(0x3E0)
+#define ETHER_MD_CA_WR_OFST					(10)
+#define ETHER_MD_CA_WR_MSK					(0x400)
+#define ETHER_MD_CA_BUSY_OFST					(11)
+#define ETHER_MD_CA_BUSY_MSK					(0x800)
+#define ETHER_MD_CA_PRESUPP_OFST				(12)
+#define ETHER_MD_CA_PRESUPP_MSK					(0x1000)
+
+#define ETHER_ARC_ADR(base)	      (ETHER00_TYPE (base + 0x160))
+#define ETHER_ARC_ADR_ARC_LOC_OFST				(2)
+#define ETHER_ARC_ADR_ARC_LOC_MSK				(0xFFC)
+
+#define ETHER_ARC_DATA(base)  (ETHER00_TYPE (base + 0x364))
+
+#define ETHER_ARC_ENA(base)   (ETHER00_TYPE (base + 0x28))
+#define ETHER_ARC_ENA_MSK					(0x1FFFFF)
+
+#define ETHER_PROM_CTL(base)							(ETHER00_TYPE (base + 0x2c))
+#define ETHER_PROM_CTL_PROM_ADDR_OFST			(0)
+#define ETHER_PROM_CTL_PROM_ADDR_MSK			(0x3F)
+#define ETHER_PROM_CTL_OPCODE_OFST				(13)
+#define ETHER_PROM_CTL_OPCODE_MSK				(0x6000)
+#define ETHER_PROM_CTL_OPCODE_READ_MSK			(0x4000)
+#define ETHER_PROM_CTL_OPCODE_WRITE_MSK			(0x2000)
+#define ETHER_PROM_CTL_OPCODE_ERASE_MSK			(0x6000)
+#define ETHER_PROM_CTL_ENABLE_MSK				(0x0030)
+#define ETHER_PROM_CTL_DISABLE_MSK				(0x0000)
+#define ETHER_PROM_CTL_BUSY_OFST				(15)
+#define ETHER_PROM_CTL_BUSY_MSK					(0x8000)
+
+#define ETHER_PROM_DATA(base)							(ETHER00_TYPE (base + 0x30))
+
+#define ETHER_MISS_CNT(base)							(ETHER00_TYPE (base + 0x3c))
+#define ETHER_MISS_CNT_COUNT_OFST				(0)
+#define ETHER_MISS_CNT_COUNT_MSK				(0xFFFF)
+
+#define ETHER_CNTDATA(base)							(ETHER00_TYPE (base + 0x80))
+
+#define ETHER_CNTACC(base)							(ETHER00_TYPE (base + 0x84))
+#define ETHER_CNTACC_ADDR_OFST					(0)
+#define ETHER_CNTACC_ADDR_MSK					(0xFF)
+#define ETHER_CNTACC_WRRDN_OFST					(8)
+#define ETHER_CNTACC_WRRDN_MSK					(0x100)
+#define ETHER_CNTACC_CLEAR_OFST					(9)
+#define ETHER_CNTACC_CLEAR_MSK					(0x200)
+
+#define ETHER_TXRMINTEN(base)							(ETHER00_TYPE (base + 0x88))
+#define ETHER_TXRMINTEN_MSK						(0x3FFFFFFF)
+
+#define ETHER_RXRMINTEN(base)							(ETHER00_TYPE (base + 0x8C))
+#define ETHER_RXRMINTEN_MSK						(0xFFFFFF)
+
+/*
+*	RMON Registers
+*/
+#define		RMON_COLLISION0						0x0
+#define		RMON_COLLISION1						0x1
+#define		RMON_COLLISION2						0x2
+#define		RMON_COLLISION3						0x3
+#define		RMON_COLLISION4						0x4
+#define		RMON_COLLISION5						0x5
+#define		RMON_COLLISION6						0x6
+#define		RMON_COLLISION7						0x7
+#define		RMON_COLLISION8						0x8
+#define		RMON_COLLISION9						0x9
+#define		RMON_COLLISION10					0xa
+#define		RMON_COLLISION11					0xb
+#define		RMON_COLLISION12					0xc
+#define		RMON_COLLISION13					0xd
+#define		RMON_COLLISION14					0xe
+#define		RMON_COLLISION15					0xf
+#define		RMON_COLLISION16					0x10
+#define		RMON_FRAMES_WITH_DEFERRED_XMISSIONS	0x11
+#define		RMON_LATE_COLLISIONS				0x12
+#define		RMON_FRAMES_LOST_DUE_TO_MAC_XMIT	0x13
+#define		RMON_CARRIER_SENSE_ERRORS			0x14
+#define		RMON_FRAMES_WITH_EXCESSIVE_DEFERAL	0x15
+#define		RMON_UNICAST_FRAMES_TRANSMITTED_OK	0x16
+#define		RMON_MULTICAST_FRAMES_XMITTED_OK	0x17
+#define		RMON_BROADCAST_FRAMES_XMITTED_OK	0x18
+#define		RMON_SQE_TEST_ERRORS				0x19
+#define		RMON_PAUSE_MACCTRL_FRAMES_XMITTED	0x1A
+#define		RMON_MACCTRL_FRAMES_XMITTED			0x1B
+#define		RMON_VLAN_FRAMES_XMITTED			0x1C
+#define		RMON_OCTETS_XMITTED_OK				0x1D
+#define		RMON_OCTETS_XMITTED_OK_HI			0x1E
+
+#define		RMON_RX_PACKET_SIZES0				0x40
+#define		RMON_RX_PACKET_SIZES1				0x41
+#define		RMON_RX_PACKET_SIZES2				0x42
+#define		RMON_RX_PACKET_SIZES3				0x43
+#define		RMON_RX_PACKET_SIZES4				0x44
+#define		RMON_RX_PACKET_SIZES5				0x45
+#define		RMON_RX_PACKET_SIZES6				0x46
+#define		RMON_RX_PACKET_SIZES7				0x47
+#define		RMON_FRAME_CHECK_SEQUENCE_ERRORS	0x48
+#define		RMON_ALIGNMENT_ERRORS				0x49
+#define		RMON_FRAGMENTS						0x4A
+#define		RMON_JABBERS						0x4B
+#define		RMON_FRAMES_LOST_TO_INTMACRCVERR	0x4C
+#define		RMON_UNICAST_FRAMES_RCVD_OK			0x4D
+#define		RMON_MULTICAST_FRAMES_RCVD_OK		0x4E
+#define		RMON_BROADCAST_FRAMES_RCVD_OK		0x4F
+#define		RMON_IN_RANGE_LENGTH_ERRORS			0x50
+#define		RMON_OUT_OF_RANGE_LENGTH_ERRORS		0x51
+#define		RMON_VLAN_FRAMES_RCVD				0x52
+#define		RMON_PAUSE_MAC_CTRL_FRAMES_RCVD		0x53
+#define		RMON_MAC_CTRL_FRAMES_RCVD			0x54
+#define		RMON_OCTETS_RCVD_OK					0x55
+#define		RMON_OCTETS_RCVD_OK_HI				0x56
+#define		RMON_OCTETS_RCVD_OTHER				0x57
+#define		RMON_OCTETS_RCVD_OTHER_HI			0x58
+
+#endif /* __ETHER00_H */
diff --git a/include/asm-arm/arch-epxa10db/excalibur.h b/include/asm-arm/arch-epxa10db/excalibur.h
new file mode 100644
index 000000000000..5c91dd6d7822
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/excalibur.h
@@ -0,0 +1,91 @@
+/* megafunction wizard: %ARM-Based Excalibur%
+   GENERATION: STANDARD
+   VERSION: WM1.0
+   MODULE: ARM-Based Excalibur
+   PROJECT: excalibur
+   ============================================================
+   File Name: v:\embedded\linux\bootldr\excalibur.h
+   Megafunction Name(s): ARM-Based Excalibur
+   ============================================================
+
+   ************************************************************
+   THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
+   ************************************************************/
+
+#ifndef	EXCALIBUR_H_INCLUDED
+#define	EXCALIBUR_H_INCLUDED
+
+#define EXC_DEFINE_PROCESSOR_LITTLE_ENDIAN
+#define EXC_DEFINE_BOOT_FROM_FLASH
+
+#define	EXC_INPUT_CLK_FREQUENCY (50000000)
+#define	EXC_AHB1_CLK_FREQUENCY (150000000)
+#define	EXC_AHB2_CLK_FREQUENCY (75000000)
+#define	EXC_SDRAM_CLK_FREQUENCY (75000000)
+
+/* Registers Block */
+#define	EXC_REGISTERS_BASE (0x7fffc000)
+#define	EXC_MODE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x000)
+#define	EXC_IO_CTRL00_BASE (EXC_REGISTERS_BASE + 0x040)
+#define	EXC_MMAP00_BASE (EXC_REGISTERS_BASE + 0x080)
+#define	EXC_PLD_CONFIG00_BASE (EXC_REGISTERS_BASE + 0x140)
+#define	EXC_TIMER00_BASE (EXC_REGISTERS_BASE + 0x200)
+#define	EXC_INT_CTRL00_BASE (EXC_REGISTERS_BASE + 0xc00)
+#define	EXC_CLOCK_CTRL00_BASE (EXC_REGISTERS_BASE + 0x300)
+#define	EXC_WATCHDOG00_BASE (EXC_REGISTERS_BASE + 0xa00)
+#define	EXC_UART00_BASE (EXC_REGISTERS_BASE + 0x280)
+#define	EXC_EBI00_BASE (EXC_REGISTERS_BASE + 0x380)
+#define	EXC_SDRAM00_BASE (EXC_REGISTERS_BASE + 0x400)
+#define	EXC_AHB12_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x800)
+#define	EXC_PLD_STRIPE_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
+#define	EXC_STRIPE_PLD_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
+
+#define	EXC_REGISTERS_SIZE (0x00004000)
+
+/* EBI Block(s) */
+#define	EXC_EBI_BLOCK0_BASE (0x40000000)
+#define	EXC_EBI_BLOCK0_SIZE (0x00400000)
+#define	EXC_EBI_BLOCK0_WIDTH (8)
+#define	EXC_EBI_BLOCK0_NON_CACHEABLE
+#define	EXC_EBI_BLOCK1_BASE (0x40400000)
+#define	EXC_EBI_BLOCK1_SIZE (0x00400000)
+#define	EXC_EBI_BLOCK1_WIDTH (16)
+#define	EXC_EBI_BLOCK1_NON_CACHEABLE
+#define	EXC_EBI_BLOCK2_BASE (0x40800000)
+#define	EXC_EBI_BLOCK2_SIZE (0x00400000)
+#define	EXC_EBI_BLOCK2_WIDTH (16)
+#define	EXC_EBI_BLOCK2_NON_CACHEABLE
+#define	EXC_EBI_BLOCK3_BASE (0x40c00000)
+#define	EXC_EBI_BLOCK3_SIZE (0x00400000)
+#define	EXC_EBI_BLOCK3_WIDTH (16)
+#define	EXC_EBI_BLOCK3_NON_CACHEABLE
+
+/* SDRAM Block(s) */
+#define	EXC_SDRAM_BLOCK0_BASE (0x00000000)
+#define	EXC_SDRAM_BLOCK0_SIZE (0x04000000)
+#define	EXC_SDRAM_BLOCK0_WIDTH (32)
+#define	EXC_SDRAM_BLOCK1_BASE (0x04000000)
+#define	EXC_SDRAM_BLOCK1_SIZE (0x04000000)
+#define	EXC_SDRAM_BLOCK1_WIDTH (32)
+
+/* Single Port SRAM Block(s) */
+#define	EXC_SPSRAM_BLOCK0_BASE (0x08000000)
+#define	EXC_SPSRAM_BLOCK0_SIZE (0x00020000)
+#define	EXC_SPSRAM_BLOCK1_BASE (0x08020000)
+#define	EXC_SPSRAM_BLOCK1_SIZE (0x00020000)
+
+/* PLD Block(s) */
+#define	EXC_PLD_BLOCK0_BASE (0x80000000)
+#define	EXC_PLD_BLOCK0_SIZE (0x00004000)
+#define	EXC_PLD_BLOCK0_NON_CACHEABLE
+#define	EXC_PLD_BLOCK1_BASE (0xf000000)
+#define	EXC_PLD_BLOCK1_SIZE (0x00004000)
+#define	EXC_PLD_BLOCK1_NON_CACHEABLE
+#define	EXC_PLD_BLOCK2_BASE (0x80008000)
+#define	EXC_PLD_BLOCK2_SIZE (0x00004000)
+#define	EXC_PLD_BLOCK2_NON_CACHEABLE
+#define	EXC_PLD_BLOCK3_BASE (0x8000c000)
+#define	EXC_PLD_BLOCK3_SIZE (0x00004000)
+#define	EXC_PLD_BLOCK3_NON_CACHEABLE
+
+#endif
diff --git a/include/asm-arm/arch-epxa10db/hardware.h b/include/asm-arm/arch-epxa10db/hardware.h
new file mode 100644
index 000000000000..b992c2924a77
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/hardware.h
@@ -0,0 +1,64 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/arch/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xf0000000                 // VA of IO 
+#define IO_SIZE			0x10000000                 // How much?
+#define IO_START		EXC_REGISTERS_BASE              // PA of IO
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | 0xf0000000) 
+
+#define FLASH_VBASE             0xFE000000
+#define FLASH_SIZE              0x01000000
+#define FLASH_START             EXC_EBI_BLOCK0_BASE
+#define FLASH_VADDR(x) ((x)|0xFE000000)
+/*
+ * Similar to above, but for PCI addresses (memory, IO, Config and the
+ * V3 chip itself).  WARNING: this has to mirror definitions in platform.h
+ */
+#if 0
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+#endif
+
+
+#endif
+
diff --git a/include/asm-arm/arch-epxa10db/int_ctrl00.h b/include/asm-arm/arch-epxa10db/int_ctrl00.h
new file mode 100644
index 000000000000..23ec864c40bb
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/int_ctrl00.h
@@ -0,0 +1,288 @@
+/*
+ *  
+ *  This file contains the register definitions for the Excalibur
+ *  Timer TIMER00.
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __INT_CTRL00_H
+#define __INT_CTRL00_H
+
+#define INT_MS(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x00 ))
+#define INT_MS_FC_MSK (0x10000)
+#define INT_MS_FC_OFST (16)
+#define INT_MS_M1_MSK (0x8000)
+#define INT_MS_M1_OFST (15)
+#define INT_MS_M0_MSK (0x4000)
+#define INT_MS_M0_OFST (14)
+#define INT_MS_AE_MSK (0x2000)
+#define INT_MS_AE_OFST (13)
+#define INT_MS_PE_MSK (0x1000)
+#define INT_MS_PE_OFST (12)
+#define INT_MS_EE_MSK (0x0800)
+#define INT_MS_EE_OFST (11)
+#define INT_MS_PS_MSK (0x0400)
+#define INT_MS_PS_OFST (10)
+#define INT_MS_T1_MSK (0x0200)
+#define INT_MS_T1_OFST (9)
+#define INT_MS_T0_MSK (0x0100)
+#define INT_MS_T0_OFST (8)
+#define INT_MS_UA_MSK (0x0080)
+#define INT_MS_UA_OFST (7)
+#define INT_MS_IP_MSK (0x0040)
+#define INT_MS_IP_OFST (6)
+#define INT_MS_P5_MSK (0x0020)
+#define INT_MS_P5_OFST (5)
+#define INT_MS_P4_MSK (0x0010)
+#define INT_MS_P4_OFST (4)
+#define INT_MS_P3_MSK (0x0008)
+#define INT_MS_P3_OFST (3)
+#define INT_MS_P2_MSK (0x0004)
+#define INT_MS_P2_OFST (2)
+#define INT_MS_P1_MSK (0x0002)
+#define INT_MS_P1_OFST (1)
+#define INT_MS_P0_MSK (0x0001)
+#define INT_MS_P0_OFST (0)
+
+#define INT_MC(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x04 ))
+#define INT_MC_FC_MSK (0x10000)
+#define INT_MC_FC_OFST (16)
+#define INT_MC_M1_MSK (0x8000)
+#define INT_MC_M1_OFST (15)
+#define INT_MC_M0_MSK (0x4000)
+#define INT_MC_M0_OFST (14)
+#define INT_MC_AE_MSK (0x2000)
+#define INT_MC_AE_OFST (13)
+#define INT_MC_PE_MSK (0x1000)
+#define INT_MC_PE_OFST (12)
+#define INT_MC_EE_MSK (0x0800)
+#define INT_MC_EE_OFST (11)
+#define INT_MC_PS_MSK (0x0400)
+#define INT_MC_PS_OFST (10)
+#define INT_MC_T1_MSK (0x0200)
+#define INT_MC_T1_OFST (9)
+#define INT_MC_T0_MSK (0x0100)
+#define INT_MC_T0_OFST (8)
+#define INT_MC_UA_MSK (0x0080)
+#define INT_MC_UA_OFST (7)
+#define INT_MC_IP_MSK (0x0040)
+#define INT_MC_IP_OFST (6)
+#define INT_MC_P5_MSK (0x0020)
+#define INT_MC_P5_OFST (5)
+#define INT_MC_P4_MSK (0x0010)
+#define INT_MC_P4_OFST (4)
+#define INT_MC_P3_MSK (0x0008)
+#define INT_MC_P3_OFST (3)
+#define INT_MC_P2_MSK (0x0004)
+#define INT_MC_P2_OFST (2)
+#define INT_MC_P1_MSK (0x0002)
+#define INT_MC_P1_OFST (1)
+#define INT_MC_P0_MSK (0x0001)
+#define INT_MC_P0_OFST (0)
+
+#define INT_SS(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x08 ))
+#define INT_SS_FC_SSK (0x8000)
+#define INT_SS_FC_OFST (15)
+#define INT_SS_M1_SSK (0x8000)
+#define INT_SS_M1_OFST (15)
+#define INT_SS_M0_SSK (0x4000)
+#define INT_SS_M0_OFST (14)
+#define INT_SS_AE_SSK (0x2000)
+#define INT_SS_AE_OFST (13)
+#define INT_SS_PE_SSK (0x1000)
+#define INT_SS_PE_OFST (12)
+#define INT_SS_EE_SSK (0x0800)
+#define INT_SS_EE_OFST (11)
+#define INT_SS_PS_SSK (0x0400)
+#define INT_SS_PS_OFST (10)
+#define INT_SS_T1_SSK (0x0200)
+#define INT_SS_T1_OFST (9)
+#define INT_SS_T0_SSK (0x0100)
+#define INT_SS_T0_OFST (8)
+#define INT_SS_UA_SSK (0x0080)
+#define INT_SS_UA_OFST (7)
+#define INT_SS_IP_SSK (0x0040)
+#define INT_SS_IP_OFST (6)
+#define INT_SS_P5_SSK (0x0020)
+#define INT_SS_P5_OFST (5)
+#define INT_SS_P4_SSK (0x0010)
+#define INT_SS_P4_OFST (4)
+#define INT_SS_P3_SSK (0x0008)
+#define INT_SS_P3_OFST (3)
+#define INT_SS_P2_SSK (0x0004)
+#define INT_SS_P2_OFST (2)
+#define INT_SS_P1_SSK (0x0002)
+#define INT_SS_P1_OFST (1)
+#define INT_SS_P0_SSK (0x0001)
+#define INT_SS_P0_OFST (0)
+
+#define INT_RS(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x0C ))
+#define INT_RS_FC_RSK (0x10000)
+#define INT_RS_FC_OFST (16)
+#define INT_RS_M1_RSK (0x8000)
+#define INT_RS_M1_OFST (15)
+#define INT_RS_M0_RSK (0x4000)
+#define INT_RS_M0_OFST (14)
+#define INT_RS_AE_RSK (0x2000)
+#define INT_RS_AE_OFST (13)
+#define INT_RS_PE_RSK (0x1000)
+#define INT_RS_PE_OFST (12)
+#define INT_RS_EE_RSK (0x0800)
+#define INT_RS_EE_OFST (11)
+#define INT_RS_PS_RSK (0x0400)
+#define INT_RS_PS_OFST (10)
+#define INT_RS_T1_RSK (0x0200)
+#define INT_RS_T1_OFST (9)
+#define INT_RS_T0_RSK (0x0100)
+#define INT_RS_T0_OFST (8)
+#define INT_RS_UA_RSK (0x0080)
+#define INT_RS_UA_OFST (7)
+#define INT_RS_IP_RSK (0x0040)
+#define INT_RS_IP_OFST (6)
+#define INT_RS_P5_RSK (0x0020)
+#define INT_RS_P5_OFST (5)
+#define INT_RS_P4_RSK (0x0010)
+#define INT_RS_P4_OFST (4)
+#define INT_RS_P3_RSK (0x0008)
+#define INT_RS_P3_OFST (3)
+#define INT_RS_P2_RSK (0x0004)
+#define INT_RS_P2_OFST (2)
+#define INT_RS_P1_RSK (0x0002)
+#define INT_RS_P1_OFST (1)
+#define INT_RS_P0_RSK (0x0001)
+#define INT_RS_P0_OFST (0)
+
+#define INT_ID(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x10 ))
+#define INT_ID_ID_MSK (0x3F)
+#define INT_ID_ID_OFST (0)
+
+#define INT_PLD_PRIORITY(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x14 ))
+#define INT_PLD_PRIORITY_PRI_MSK (0x3F)
+#define INT_PLD_PRIORITY_PRI_OFST (0)
+#define INT_PLD_PRIORITY_GA_MSK (0x40)
+#define INT_PLD_PRIORITY_GA_OFST (6)
+
+#define INT_MODE(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x18 ))
+#define INT_MODE_MODE_MSK (0x3)
+#define INT_MODE_MODE_OFST (0)
+
+#define INT_PRIORITY_P0(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x80 ))
+#define INT_PRIORITY_P0_PRI_MSK (0x3F)
+#define INT_PRIORITY_P0_PRI_OFST (0)
+#define INT_PRIORITY_P0_FQ_MSK (0x40)
+#define INT_PRIORITY_P0_FQ_OFST (6)
+
+#define INT_PRIORITY_P1(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x84 ))
+#define INT_PRIORITY_P1_PRI_MSK (0x3F)
+#define INT_PRIORITY_P1_PRI_OFST (0)
+#define INT_PRIORITY_P1_FQ_MSK (0x40)
+#define INT_PRIORITY_P1_FQ_OFST (6)
+
+#define INT_PRIORITY_P2(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x88 ))
+#define INT_PRIORITY_P2_PRI_MSK (0x3F)
+#define INT_PRIORITY_P2_PRI_OFST (0)
+#define INT_PRIORITY_P2_FQ_MSK (0x40)
+#define INT_PRIORITY_P2_FQ_OFST (6)
+
+#define INT_PRIORITY_P3(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x8C ))
+#define INT_PRIORITY_P3_PRI_MSK (0x3F)
+#define INT_PRIORITY_P3_PRI_OFST (0)
+#define INT_PRIORITY_P3_FQ_MSK (0x40)
+#define INT_PRIORITY_P3_FQ_OFST (6)
+
+#define INT_PRIORITY_P4(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x90 ))
+#define INT_PRIORITY_P4_PRI_MSK (0x3F)
+#define INT_PRIORITY_P4_PRI_OFST (0)
+#define INT_PRIORITY_P4_FQ_MSK (0x40)
+#define INT_PRIORITY_P4_FQ_OFST (6)
+
+#define INT_PRIORITY_P5(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x94 ))
+#define INT_PRIORITY_P5_PRI_MSK (0x3F)
+#define INT_PRIORITY_P5_PRI_OFST (0)
+#define INT_PRIORITY_P5_FQ_MSK (0x40)
+#define INT_PRIORITY_P5_FQ_OFST (6)
+
+#define INT_PRIORITY_IP(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x94 ))
+#define INT_PRIORITY_IP_PRI_MSK (0x3F)
+#define INT_PRIORITY_IP_PRI_OFST (0)
+#define INT_PRIORITY_IP_FQ_MSK (0x40)
+#define INT_PRIORITY_IP_FQ_OFST (6)
+
+#define INT_PRIORITY_UA(base_addr) (INT_CTRL00_TYPE (base_addr  + 0x9C ))
+#define INT_PRIORITY_UA_PRI_MSK (0x3F)
+#define INT_PRIORITY_UA_PRI_OFST (0)
+#define INT_PRIORITY_UA_FQ_MSK (0x40)
+#define INT_PRIORITY_UA_FQ_OFST (6)
+
+#define INT_PRIORITY_T0(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xA0 ))
+#define INT_PRIORITY_T0_PRI_MSK (0x3F)
+#define INT_PRIORITY_T0_PRI_OFST (0)
+#define INT_PRIORITY_T0_FQ_MSK (0x40)
+#define INT_PRIORITY_T0_FQ_OFST (6)
+
+#define INT_PRIORITY_T1(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xA4 ))
+#define INT_PRIORITY_T1_PRI_MSK (0x3F)
+#define INT_PRIORITY_T1_PRI_OFST (0)
+#define INT_PRIORITY_T1_FQ_MSK (0x40)
+#define INT_PRIORITY_T1_FQ_OFST (6)
+
+#define INT_PRIORITY_PS(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xA8 ))
+#define INT_PRIORITY_PS_PRI_MSK (0x3F)
+#define INT_PRIORITY_PS_PRI_OFST (0)
+#define INT_PRIORITY_PS_FQ_MSK (0x40)
+#define INT_PRIORITY_PS_FQ_OFST (6)
+
+#define INT_PRIORITY_EE(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xAC ))
+#define INT_PRIORITY_EE_PRI_MSK (0x3F)
+#define INT_PRIORITY_EE_PRI_OFST (0)
+#define INT_PRIORITY_EE_FQ_MSK (0x40)
+#define INT_PRIORITY_EE_FQ_OFST (6)
+
+#define INT_PRIORITY_PE(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xB0 ))
+#define INT_PRIORITY_PE_PRI_MSK (0x3F)
+#define INT_PRIORITY_PE_PRI_OFST (0)
+#define INT_PRIORITY_PE_FQ_MSK (0x40)
+#define INT_PRIORITY_PE_FQ_OFST (6)
+
+#define INT_PRIORITY_AE(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xB4 ))
+#define INT_PRIORITY_AE_PRI_MSK (0x3F)
+#define INT_PRIORITY_AE_PRI_OFST (0)
+#define INT_PRIORITY_AE_FQ_MSK (0x40)
+#define INT_PRIORITY_AE_FQ_OFST (6)
+
+#define INT_PRIORITY_M0(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xB8 ))
+#define INT_PRIORITY_M0_PRI_MSK (0x3F)
+#define INT_PRIORITY_M0_PRI_OFST (0)
+#define INT_PRIORITY_M0_FQ_MSK (0x40)
+#define INT_PRIORITY_M0_FQ_OFST (6)
+
+#define INT_PRIORITY_M1(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xBC ))
+#define INT_PRIORITY_M1_PRI_MSK (0x3F)
+#define INT_PRIORITY_M1_PRI_OFST (0)
+#define INT_PRIORITY_M1_FQ_MSK (0x40)
+#define INT_PRIORITY_M1_FQ_OFST (6)
+
+#define INT_PRIORITY_FC(base_addr) (INT_CTRL00_TYPE (base_addr  + 0xC0 ))
+#define INT_PRIORITY_FC_PRI_MSK (0x3F)
+#define INT_PRIORITY_FC_PRI_OFST (0)
+#define INT_PRIORITY_FC_FQ_MSK (0x40)
+#define INT_PRIORITY_FC_FQ_OFST (6)
+
+#endif /* __INT_CTRL00_H */
+
+
diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h
new file mode 100644
index 000000000000..1f0afa257621
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/io.h
@@ -0,0 +1,39 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/*
+ * Generic virtual read/write
+ */
+/*#define outsw   __arch_writesw
+#define outsl   __arch_writesl
+#define outsb   __arch_writesb
+#define insb    __arch_readsb
+#define insw    __arch_readsw
+#define insl    __arch_readsl*/
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)            (a) 
+
+#endif
diff --git a/include/asm-arm/arch-epxa10db/irqs.h b/include/asm-arm/arch-epxa10db/irqs.h
new file mode 100644
index 000000000000..c3758a3b5d9d
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/irqs.h
@@ -0,0 +1,45 @@
+/*
+ *  linux/include/asm-arm/arch-camelot/irqs.h
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* Use the Excalibur chip definitions */
+#define INT_CTRL00_TYPE
+#include "asm/arch/int_ctrl00.h"
+
+
+#define IRQ_PLD0                     INT_MS_P0_OFST
+#define IRQ_PLD1                     INT_MS_P1_OFST
+#define IRQ_PLD2                     INT_MS_P2_OFST
+#define IRQ_PLD3                     INT_MS_P3_OFST
+#define IRQ_PLD4                     INT_MS_P4_OFST
+#define IRQ_PLD5                     INT_MS_P5_OFST
+#define IRQ_EXT                      INT_MS_IP_OFST
+#define IRQ_UART                     INT_MS_UA_OFST
+#define IRQ_TIMER0                   INT_MS_T0_OFST
+#define IRQ_TIMER1                   INT_MS_T1_OFST
+#define IRQ_PLL                      INT_MS_PLL_OFST
+#define IRQ_EBI                      INT_MS_EBI_OFST
+#define IRQ_STRIPE_BRIDGE            INT_MS_PLL_OFST
+#define IRQ_AHB_BRIDGE               INT_MS_PLL_OFST
+#define IRQ_COMMRX                   INT_MS_CR_OFST
+#define IRQ_COMMTX                   INT_MS_CT_OFST
+#define IRQ_FAST_COMM                INT_MS_FC_OFST
+
+#define NR_IRQS                         (INT_MS_FC_OFST + 1)
+
diff --git a/include/asm-arm/arch-epxa10db/memory.h b/include/asm-arm/arch-epxa10db/memory.h
new file mode 100644
index 000000000000..3f86bf7f67f0
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10/memory.h
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x00000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + /*SDRAM_BASE*/0)
+#define __bus_to_virt(x)	(x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-epxa10db/mode_ctrl00.h b/include/asm-arm/arch-epxa10db/mode_ctrl00.h
new file mode 100644
index 000000000000..d8a7efa12e19
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/mode_ctrl00.h
@@ -0,0 +1,80 @@
+#ifndef __MODE_CTRL00_H
+#define __MODE_CTRL00_H
+
+/*
+ * Register definitions for the reset and mode control
+ */
+
+/*
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+
+#define BOOT_CR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  ))
+#define BOOT_CR_BF_MSK (0x1)
+#define BOOT_CR_BF_OFST (0)
+#define BOOT_CR_HM_MSK (0x2)
+#define BOOT_CR_HM_OFST (1)
+#define BOOT_CR_RE_MSK (0x4)
+#define BOOT_CR_RE_OFST (2)
+
+#define RESET_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x4 ))
+#define RESET_SR_WR_MSK (0x1)
+#define RESET_SR_WR_OFST (0)
+#define RESET_SR_CR_MSK (0x2)
+#define RESET_SR_CR_OFST (1)
+#define RESET_SR_JT_MSK (0x4)
+#define RESET_SR_JT_OFST (2)
+#define RESET_SR_ER_MSK (0x8)
+#define RESET_SR_ER_OFST (3)
+
+#define ID_CODE(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x08 ))
+
+#define SRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x20 ))
+#define SRAM0_SR_SIZE_MSK (0xFFFFF000)
+#define SRAM0_SR_SIZE_OFST (12)
+
+#define SRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x24 ))
+#define SRAM1_SR_SIZE_MSK (0xFFFFF000)
+#define SRAM1_SR_SIZE_OFST (12)
+
+#define DPSRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x30 ))
+
+#define DPSRAM0_SR_MODE_MSK (0xF)
+#define DPSRAM0_SR_MODE_OFST (0)
+#define DPSRAM0_SR_GLBL_MSK (0x30)
+#define DPSRAM0_SR_SIZE_MSK (0xFFFFF000)
+#define DPSRAM0_SR_SIZE_OFST (12)
+
+#define DPSRAM0_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x34 ))
+#define DPSRAM0_LCR_LCKADDR_MSK (0x1FFE0)
+#define DPSRAM0_LCR_LCKADDR_OFST (4)
+
+#define DPSRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x38 ))
+#define DPSRAM1_SR_MODE_MSK (0xF)
+#define DPSRAM1_SR_MODE_OFST (0)
+#define DPSRAM1_SR_GLBL_MSK (0x30)
+#define DPSRAM1_SR_GLBL_OFST (4)
+#define DPSRAM1_SR_SIZE_MSK (0xFFFFF000)
+#define DPSRAM1_SR_SIZE_OFST (12)
+
+#define DPSRAM1_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR  + 0x3C ))
+#define DPSRAM1_LCR_LCKADDR_MSK (0x1FFE0)
+#define DPSRAM1_LCR_LCKADDR_OFST (4)
+
+#endif /* __MODE_CTRL00_H */
diff --git a/include/asm-arm/arch-epxa10db/param.h b/include/asm-arm/arch-epxa10db/param.h
new file mode 100644
index 000000000000..783dedd71c8f
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-epxa10db/platform.h b/include/asm-arm/arch-epxa10db/platform.h
new file mode 100644
index 000000000000..129bb0f212a0
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/platform.h
@@ -0,0 +1,7 @@
+#ifndef PLATFORM_H
+#define PLATFORM_H
+#include "excalibur.h"
+
+#define MAXIRQNUM 15 
+#endif
+
diff --git a/include/asm-arm/arch-epxa10db/pld_conf00.h b/include/asm-arm/arch-epxa10db/pld_conf00.h
new file mode 100644
index 000000000000..7af2c38dacc6
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/pld_conf00.h
@@ -0,0 +1,73 @@
+#ifndef __PLD_CONF00_H
+#define __PLD_CONF00_H
+
+/*
+ * Register definitions for the PLD Configuration Logic
+ */
+
+/*
+ *  
+ *  This file contains the register definitions for the Excalibur
+ *  Interrupt controller INT_CTRL00.
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+ 
+#define CONFIG_CONTROL(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR))  
+#define CONFIG_CONTROL_LK_MSK (0x1)
+#define CONFIG_CONTROL_LK_OFST (0)
+#define CONFIG_CONTROL_CO_MSK (0x2)
+#define CONFIG_CONTROL_CO_OFST (1)
+#define CONFIG_CONTROL_B_MSK  (0x4)
+#define CONFIG_CONTROL_B_OFST (2)
+#define CONFIG_CONTROL_PC_MSK (0x8)
+#define CONFIG_CONTROL_PC_OFST (3)
+#define CONFIG_CONTROL_E_MSK (0x10)
+#define CONFIG_CONTROL_E_OFST (4)
+#define CONFIG_CONTROL_ES_MSK (0xE0)
+#define CONFIG_CONTROL_ES_OFST (5)
+#define CONFIG_CONTROL_ES_0_MSK (0x20)
+#define CONFIG_CONTROL_ES_1_MSK (0x40)
+#define CONFIG_CONTROL_ES_2_MSK (0x80)
+
+#define CONFIG_CONTROL_CLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR  + 0x4 ))
+#define CONFIG_CONTROL_CLOCK_RATIO_MSK (0xFFFF)
+#define CONFIG_CONTROL_CLOCK_RATIO_OFST (0)
+
+#define CONFIG_CONTROL_DATA(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR  + 0x8 ))
+#define CONFIG_CONTROL_DATA_MSK (0xFFFFFFFF)
+#define CONFIG_CONTROL_DATA_OFST (0)
+
+#define CONFIG_UNLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR  + 0xC )) 
+#define CONFIG_UNLOCK_MSK (0xFFFFFFFF)
+#define CONFIG_UNLOCK_OFST (0)
+
+#define CONFIG_UNLOCK_MAGIC (0x554E4C4B)
+
+#endif /* __PLD_CONF00_H */
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/include/asm-arm/arch-epxa10db/system.h b/include/asm-arm/arch-epxa10db/system.h
new file mode 100644
index 000000000000..345b092a1ed5
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/system.h
@@ -0,0 +1,41 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+extern __inline__ void arch_reset(char mode)
+{
+	/* Hmm... We can probably do something with the watchdog... */
+}
+
+#endif
diff --git a/include/asm-arm/arch-epxa10db/tdkphy.h b/include/asm-arm/arch-epxa10db/tdkphy.h
new file mode 100644
index 000000000000..5e107bd4e109
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/tdkphy.h
@@ -0,0 +1,209 @@
+/*
+ *  linux/drivers/tdkphy.h
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __TDKPHY_H
+#define __TDKPHY_H
+
+/*
+ * Register definitions for the TDK 78Q2120 PHY 
+ * which is on the Camelot board
+ */
+
+/*
+ * Copyright (c) Altera Corporation 2000.
+ * All rights reserved.
+ */
+#define PHY_CONTROL                                                                                     (0)
+#define PHY_CONTROL_COLT_MSK                                                            (0x80)
+#define PHY_CONTROL_COLT_OFST                                                           (7)
+#define PHY_CONTROL_DUPLEX_MSK                                                          (0x100)
+#define PHY_CONTROL_DUPLEX_OFST                                                         (8)
+#define PHY_CONTROL_RANEG_MSK                                                           (0x200)
+#define PHY_CONTROL_RANEG_OFST                                                          (9)
+#define PHY_CONTROL_ISO_MSK                                                                     (0x400)
+#define PHY_CONTROL_ISO_OFST                                                            (10)
+#define PHY_CONTROL_PWRDN_MSK                                                           (0x800)
+#define PHY_CONTROL_PWRDN_OFST                                                          (11)
+#define PHY_CONTROL_ANEGEN_MSK                                                          (0x1000)
+#define PHY_CONTROL_ANEGEN_OFST                                                         (12)
+#define PHY_CONTROL_SPEEDSL_MSK                                                         (0x2000)
+#define PHY_CONTROL_SPEEDSL_OFST                                                        (13)
+#define PHY_CONTROL_LOOPBK_MSK                                                          (0x4000)
+#define PHY_CONTROL_LOOPBK_OFST                                                         (14)
+#define PHY_CONTROL_RESET_MSK                                                           (0x8000)
+#define PHY_CONTROL_RESET_OFST                                                          (15)
+
+#define PHY_STATUS                                                                                      (1)
+#define PHY_STATUS_ETXD_MSK                                                                     (0x1)
+#define PHY_STATUS_EXTD_OFST                                                            (0)
+#define PHY_STATUS_JAB_MSK                                                                      (0x2)
+#define PHY_STATUS_JAB_OFST                                                                     (1)
+#define PHY_STATUS_LINK_MSK                                                                     (0x4)
+#define PHY_STATUS_LINK_OFST                                                            (2)
+#define PHY_STATUS_ANEGA_MSK                                                            (0x8)
+#define PHY_STATUS_ANEGA_OFST                                                           (3)
+#define PHY_STATUS_RFAULT_MSK                                                           (0x10)
+#define PHY_STATUS_RFAULT_OFST                                                          (4)
+#define PHY_STATUS_ANEGC_MSK                                                            (0x20)
+#define PHY_STATUS_ANEGC_OFST                                                           (5)
+#define PHY_STATUS_10T_H_MSK                                                            (0x800)
+#define PHY_STATUS_10T_H_OFST                                                           (11)
+#define PHY_STATUS_10T_F_MSK                                                            (0x1000)
+#define PHY_STATUS_10T_F_OFST                                                           (12)
+#define PHY_STATUS_100_X_H_MSK                                                          (0x2000)
+#define PHY_STATUS_100_X_H_OFST                                                         (13)
+#define PHY_STATUS_100_X_F_MSK                                                          (0x4000)
+#define PHY_STATUS_100_X_F_OFST                                                         (14)
+#define PHY_STATUS_100T4_MSK                                                            (0x8000)
+#define PHY_STATUS_100T4_OFST                                                           (15)
+
+#define PHY_ID1                                                                                         (2)
+#define PHY_ID1_OUI_MSK                                                                         (0xFFFF)
+#define PHY_ID1_OUI_OFST                                                                        (0)
+
+#define PHY_ID2                                                                                         (3)
+#define PHY_ID2_RN_MSK                                                                          (0xF)
+#define PHY_ID2_RN_OFST                                                                         (0)
+#define PHY_ID2_MN_MSK                                                                          (0x3F0)
+#define PHY_ID2_MN_OFST                                                                         (4)
+#define PHY_ID2_OUI_MSK                                                                         (0xFC00)
+#define PHY_ID2_OUI_OFST                                                                        (10)
+
+#define PHY_AUTO_NEG_ADVERTISEMENT                                                      (4)
+#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_MSK                         (0x1F)
+#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_OFST                        (0)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A0_MSK                                       (0x20)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A0_OFST                                      (5)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A1_MSK                                       (0x40)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A1_OFST                                      (6)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A2_MSK                                       (0x80)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A2_OFST                                      (7)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A3_MSK                                       (0x100)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A3_OFST                                      (8)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A4_MSK                                       (0x200)
+#define PHY_AUTO_NEG_ADVERTISEMENT_A4_OFST                                      (9)
+#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_MSK                                      (0x1FE0)
+#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_OFST                                     (5)
+#define PHY_AUTO_NEG_ADVERTISEMENT_RF_MSK                                       (0x2000)
+#define PHY_AUTO_NEG_ADVERTISEMENT_RF_OFST                                      (13)
+#define PHY_AUTO_NEG_ADVERTISEMENT_RSVD_MSK                                     (0x4000)
+#define PHY_AUTO_NEG_ADVERTISEMENT_RVSD_OFST                            (14)
+#define PHY_AUTO_NEG_ADVERTISEMENT_NP_MSK                                       (0x8000)
+#define PHY_AUTO_NEG_ADVERTISEMENT_NP_OFST                                      (15)
+
+#define PHY_AUTO_NEG_LINK_PARTNER                                                       (5)
+#define PHY_AUTO_NEG_LINK_PARTNER_S4_MSK                                        (0x1F)
+#define PHY_AUTO_NEG_LINK_PARTNER_S4_OFST                                       (0)
+#define PHY_AUTO_NEG_LINK_PARTNER_A7_MSK                                        (0x1FE0)
+#define PHY_AUTO_NEG_LINK_PARTNER_A7_OFST                                       (5)
+#define PHY_AUTO_NEG_LINK_PARTNER_RF_MSK                                        (0x2000)
+#define PHY_AUTO_NEG_LINK_PARTNER_RF_OFST                                       (13)
+#define PHY_AUTO_NEG_LINK_PARTNER_ACK_MSK                                       (0x4000)
+#define PHY_AUTO_NEG_LINK_PARTNER_ACK_OFST                                      (14)
+#define PHY_AUTO_NEG_LINK_PARTNER_NP_MSK                                        (0x8000)
+#define PHY_AUTO_NEG_LINK_PARTNER_NP_OFST                                       (15)
+
+#define PHY_AUTO_NEG_EXPANSION                                                          (6)
+#define PHY_AUTO_NEG_EXPANSION_LPANEGA_MSK                                      (0x1)
+#define PHY_AUTO_NEG_EXPANSION_LPANEGA_OFST                                     (0)
+#define PHY_AUTO_NEG_EXPANSION_PRX_MSK                                          (0x2)
+#define PHY_AUTO_NEG_EXPANSION_PRX_OFST                                         (1)
+#define PHY_AUTO_NEG_EXPANSION_NPA_MSK                                          (0x4)
+#define PHY_AUTO_NEG_EXPANSION_NPA_OFST                                         (2)
+#define PHY_AUTO_NEG_EXPANSION_LPNPA_MSK                                        (0x8)
+#define PHY_AUTO_NEG_EXPANSION_LPNPA_OFST                                       (3)
+#define PHY_AUTO_NEG_EXPANSION_PDF_MSK                                          (0x10)
+#define PHY_AUTO_NEG_EXPANSION_PDF_OFST                                         (4)
+
+#define PHY_VENDOR_SPECIFIC                                                                     (16)
+#define PHY_VENDOR_SPECIFIC_RXCC_MSK                                            (0x1)
+#define PHY_VENDOR_SPECIFIC_RXCC_OFST                                           (0)
+#define PHY_VENDOR_SPECIFIC_PCSBP_MSK                                           (0x2)
+#define PHY_VENDOR_SPECIFIC_PCSBP_OFST                                          (1)
+#define PHY_VENDOR_SPECIFIC_RVSPOL_MSK                                          (0x10)
+#define PHY_VENDOR_SPECIFIC_RVSPOL_OFST                                         (4)
+#define PHY_VENDOR_SPECIFIC_APOL_MSK                                            (0x20)  
+#define PHY_VENDOR_SPECIFIC_APOL_OFST                                           (5)
+#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_MSK                                       (0x40)
+#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_OFST                                      (6)
+#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_MSK                                       (0x80)
+#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_OFST                                      (7)
+#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_MSK                                       (0x100)
+#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_OFST                                      (8)
+#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_MSK                                       (0x200)
+#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_OFST                                      (9)
+#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_MSK       (0x400)
+#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_OFST      (10)
+#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_MSK           (0x800)
+#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_OFST          (11)
+#define PHY_VENDOR_SPECIFIC_TXHIM_MSK                                           (0x1000)
+#define PHY_VENDOR_SPECIFIC_TXHIM_OFST                                          (12)
+#define PHY_VENDOR_SPECIFIC_INT_LEVEL_MSK                                       (0x4000)
+#define PHY_VENDOR_SPECIFIC_INT_LEVEL_OFST                                      (14)
+#define PHY_VENDOR_SPECIFIC_RPTR_MSK                                            (0x8000)
+#define PHY_VENDOR_SPECIFIC_RPTR_OFST                                           (15)
+
+#define PHY_IRQ_CONTROL                                                                         (17)
+#define PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK                                       (0x1)
+#define PHY_IRQ_CONTROL_ANEG_COMP_INT_OFST                                      (0)
+#define PHY_IRQ_CONTROL_RFAULT_INT_MSK                                          (0x2)
+#define PHY_IRQ_CONTROL_RFAULT_INT_OFST                                         (1)
+#define PHY_IRQ_CONTROL_LS_CHG_INT_MSK                                          (0x4)
+#define PHY_IRQ_CONTROL_LS_CHG_INT_OFST                                         (2)
+#define PHY_IRQ_CONTROL_LP_ACK_INT_MSK                                          (0x8)
+#define PHY_IRQ_CONTROL_LP_ACK_INT_OFST                                         (3)
+#define PHY_IRQ_CONTROL_PDF_INT_MSK                                                     (0x10)
+#define PHY_IRQ_CONTROL_PDF_INT_OFST                                            (4)
+#define PHY_IRQ_CONTROL_PRX_INT_MSK                                                     (0x20)
+#define PHY_IRQ_CONTROL_PRX_INT_OFST                                            (5)
+#define PHY_IRQ_CONTROL_RXER_INT_MSK                                            (0x40)
+#define PHY_IRQ_CONTROL_RXER_INT_OFST                                           (6)
+#define PHY_IRQ_CONTROL_JABBER_INT_MSK                                          (0x80)
+#define PHY_IRQ_CONTROL_JABBER_INT_OFST                                         (7)
+#define PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK                                        (0x100)
+#define PHY_IRQ_CONTROL_ANEG_COMP_IE_OFST                                       (8)
+#define PHY_IRQ_CONTROL_RFAULT_IE_MSK                                           (0x200)
+#define PHY_IRQ_CONTROL_RFAULT_IE_OFST                                          (9)
+#define PHY_IRQ_CONTROL_LS_CHG_IE_MSK                                           (0x400)
+#define PHY_IRQ_CONTROL_LS_CHG_IE_OFST                                          (10)
+#define PHY_IRQ_CONTROL_LP_ACK_IE_MSK                                           (0x800)
+#define PHY_IRQ_CONTROL_LP_ACK_IE_OFST                                          (11)
+#define PHY_IRQ_CONTROL_PDF_IE_MSK                                                      (0x1000)
+#define PHY_IRQ_CONTROL_PDF_IE_OFST                                                     (12)
+#define PHY_IRQ_CONTROL_PRX_IE_MSK                                                      (0x2000)
+#define PHY_IRQ_CONTROL_PRX_IE_OFST                                                     (13)
+#define PHY_IRQ_CONTROL_RXER_IE_MSK                                                     (0x4000)
+#define PHY_IRQ_CONTROL_RXER_IE_OFST                                            (14)
+#define PHY_IRQ_CONTROL_JABBER_IE_MSK                                           (0x8000)
+#define PHY_IRQ_CONTROL_JABBER_IE_OFST                                          (15)
+
+#define PHY_DIAGNOSTIC                                                                          (18)
+#define PHY_DIAGNOSTIC_RX_LOCK_MSK                                                      (0x100)
+#define PHY_DIAGNOSTIC_RX_LOCK_OFST                                                     (8)
+#define PHY_DIAGNOSTIC_RX_PASS_MSK                                                      (0x200)
+#define PHY_DIAGNOSTIC_RX_PASS_OFST                                                     (9)
+#define PHY_DIAGNOSTIC_RATE_MSK                                                         (0x400)
+#define PHY_DIAGNOSTIC_RATE_OFST                                                        (10)
+#define PHY_DIAGNOSTIC_DPLX_MSK                                                         (0x800)
+#define PHY_DIAGNOSTIC_DPLX_OFST                                                        (11)
+#define PHY_DIAGNOSTIC_ANEGF_MSK                                                        (0x1000)
+#define PHY_DIAGNOSTIC_ANEGF_OFST                                                       (12)
+
+#endif /* __TDKPHY_H */
diff --git a/include/asm-arm/arch-epxa10db/timer00.h b/include/asm-arm/arch-epxa10db/timer00.h
new file mode 100644
index 000000000000..52a3fb58b59d
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/timer00.h
@@ -0,0 +1,98 @@
+/*
+ *  
+ *  This file contains the register definitions for the Excalibur
+ *  Timer TIMER00.
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TIMER00_H
+#define __TIMER00_H
+
+/*
+ * Register definitions for the timers
+ */
+
+
+#define TIMER0_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x00 ))
+#define TIMER0_CR_B_MSK (0x20)
+#define TIMER0_CR_B_OFST (0x5)
+#define TIMER0_CR_S_MSK  (0x10)
+#define TIMER0_CR_S_OFST (0x4)
+#define TIMER0_CR_CI_MSK (0x08)
+#define TIMER0_CR_CI_OFST (0x3)
+#define TIMER0_CR_IE_MSK (0x04)
+#define TIMER0_CR_IE_OFST (0x2)
+#define TIMER0_CR_MODE_MSK (0x3)
+#define TIMER0_CR_MODE_OFST (0)
+#define TIMER0_CR_MODE_FREE (0)
+#define TIMER0_CR_MODE_ONE  (1)
+#define TIMER0_CR_MODE_INTVL (2)
+
+#define TIMER0_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x00 ))
+#define TIMER0_SR_B_MSK (0x20)
+#define TIMER0_SR_B_OFST (0x5)
+#define TIMER0_SR_S_MSK  (0x10)
+#define TIMER0_SR_S_OFST (0x4)
+#define TIMER0_SR_CI_MSK (0x08)
+#define TIMER0_SR_CI_OFST (0x3)
+#define TIMER0_SR_IE_MSK (0x04)
+#define TIMER0_SR_IE_OFST (0x2)
+#define TIMER0_SR_MODE_MSK (0x3)
+#define TIMER0_SR_MODE_OFST (0)
+#define TIMER0_SR_MODE_FREE (0)
+#define TIMER0_SR_MODE_ONE  (1)
+#define TIMER0_SR_MODE_INTVL (2)
+
+#define TIMER0_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x010 ))
+#define TIMER0_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x020 ))
+#define TIMER0_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x030 ))
+
+#define TIMER1_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x40 ))
+#define TIMER1_CR_B_MSK (0x20)
+#define TIMER1_CR_B_OFST (0x5)
+#define TIMER1_CR_S_MSK  (0x10)
+#define TIMER1_CR_S_OFST (0x4)
+#define TIMER1_CR_CI_MSK (0x08)
+#define TIMER1_CR_CI_OFST (0x3)
+#define TIMER1_CR_IE_MSK (0x04)
+#define TIMER1_CR_IE_OFST (0x2)
+#define TIMER1_CR_MODE_MSK (0x3)
+#define TIMER1_CR_MODE_OFST (0)
+#define TIMER1_CR_MODE_FREE (0)
+#define TIMER1_CR_MODE_ONE  (1)
+#define TIMER1_CR_MODE_INTVL (2)
+
+#define TIMER1_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x40 ))
+#define TIMER1_SR_B_MSK (0x20)
+#define TIMER1_SR_B_OFST (0x5)
+#define TIMER1_SR_S_MSK  (0x10)
+#define TIMER1_SR_S_OFST (0x4)
+#define TIMER1_SR_CI_MSK (0x08)
+#define TIMER1_SR_CI_OFST (0x3)
+#define TIMER1_SR_IE_MSK (0x04)
+#define TIMER1_SR_IE_OFST (0x2)
+#define TIMER1_SR_MODE_MSK (0x3)
+#define TIMER1_SR_MODE_OFST (0)
+#define TIMER1_SR_MODE_FREE (0)
+#define TIMER1_SR_MODE_ONE  (1)
+#define TIMER1_SR_MODE_INTVL (2)
+
+#define TIMER1_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x050 ))
+#define TIMER1_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x060 ))
+#define TIMER1_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR  + 0x070 ))
+
+#endif /* __TIMER00_H */
diff --git a/include/asm-arm/arch-epxa10db/timex.h b/include/asm-arm/arch-epxa10db/timex.h
new file mode 100644
index 000000000000..b87a75fc9589
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/timex.h
+ *
+ *  Excalibur timex specifications
+ *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-epxa10db/uart00.h b/include/asm-arm/arch-epxa10db/uart00.h
new file mode 100644
index 000000000000..5abd8914d68b
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/uart00.h
@@ -0,0 +1,181 @@
+/* *
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __UART00_H
+#define __UART00_H
+
+/*
+ * Register definitions for the UART
+ */
+
+#define UART_TX_FIFO_SIZE      (15)
+
+#define UART_RSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x00 ))
+#define UART_RSR_RX_LEVEL_MSK (0x1f)
+#define UART_RSR_RX_LEVEL_OFST (0)
+#define UART_RSR_RE_MSK (0x80)
+#define UART_RSR_RE_OFST (7)
+
+#define UART_RDS(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x04 ))
+#define UART_RDS_BI_MSK (0x8)
+#define UART_RDS_BI_OFST (4)
+#define UART_RDS_FE_MSK (0x4)
+#define UART_RDS_FE_OFST (2)
+#define UART_RDS_PE_MSK (0x2)
+#define UART_RDS_PE_OFST (1)
+#define UART_RDS_OE_MSK (0x1)
+#define UART_RDS_OE_OFST (0)
+
+#define UART_RD(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x08 ))
+#define UART_RD_RX_DATA_MSK (0xff)
+#define UART_RD_RX_DATA_OFST (0)
+
+#define UART_TSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x0c ))
+#define UART_TSR_TX_LEVEL_MSK (0x1f)
+#define UART_TSR_TX_LEVEL_OFST (0)
+#define UART_TSR_TXI_MSK (0x80)
+#define UART_TSR_TXI_OFST (7)
+
+#define UART_TD(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x10 ))
+#define UART_TD_TX_DATA_MSK (0xff)
+#define UART_TD_TX_DATA_OFST (0)
+
+#define UART_FCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x14 ))
+#define UART_FCR_RX_THR_MSK (0xd0)
+#define UART_FCR_RX_THR_OFST (5)
+#define UART_FCR_RX_THR_1 (0x00)
+#define UART_FCR_RX_THR_2 (0x20)
+#define UART_FCR_RX_THR_4 (0x40)
+#define UART_FCR_RX_THR_6 (0x60)
+#define UART_FCR_RX_THR_8 (0x80)
+#define UART_FCR_RX_THR_10 (0xa0)
+#define UART_FCR_RX_THR_12 (0xc0)
+#define UART_FCR_RX_THR_14 (0xd0)
+#define UART_FCR_TX_THR_MSK (0x1c)
+#define UART_FCR_TX_THR_OFST (2)
+#define UART_FCR_TX_THR_0 (0x00)
+#define UART_FCR_TX_THR_2 (0x04)
+#define UART_FCR_TX_THR_4 (0x08)
+#define UART_FCR_TX_THR_8 (0x0c)
+#define UART_FCR_TX_THR_10 (0x10)
+#define UART_FCR_TX_THR_12 (0x14)
+#define UART_FCR_TX_THR_14 (0x18)
+#define UART_FCR_TX_THR_15 (0x1c)
+#define UART_FCR_RC_MSK (0x02)
+#define UART_FCR_RC_OFST (1)
+#define UART_FCR_TC_MSK (0x01)
+#define UART_FCR_TC_OFST (0)
+
+#define UART_IES(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x18 ))
+#define UART_IES_ME_MSK (0x8)
+#define UART_IES_ME_OFST (3)
+#define UART_IES_TIE_MSK (0x4)
+#define UART_IES_TIE_OFST (2)
+#define UART_IES_TE_MSK (0x2)
+#define UART_IES_TE_OFST (1)
+#define UART_IES_RE_MSK (0x1)
+#define UART_IES_RE_OFST (0)
+
+#define UART_IEC(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x1c ))
+#define UART_IEC_ME_MSK (0x8)
+#define UART_IEC_ME_OFST (3)
+#define UART_IEC_TIE_MSK (0x4)
+#define UART_IEC_TIE_OFST (2)
+#define UART_IEC_TE_MSK (0x2)
+#define UART_IEC_TE_OFST (1)
+#define UART_IEC_RE_MSK (0x1)
+#define UART_IEC_RE_OFST (0)
+
+#define UART_ISR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x20 ))
+#define UART_ISR_MI_MSK (0x8)
+#define UART_ISR_MI_OFST (3)
+#define UART_ISR_TII_MSK (0x4)
+#define UART_ISR_TII_OFST (2)
+#define UART_ISR_TI_MSK (0x2)
+#define UART_ISR_TI_OFST (1)
+#define UART_ISR_RI_MSK (0x1)
+#define UART_ISR_RI_OFST (0)
+
+#define UART_IID(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x24 ))
+#define UART_IID_IID_MSK (0x7)
+#define UART_IID_IID_OFST (0)
+
+#define UART_MC(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x28 ))
+#define UART_MC_OE_MSK (0x40)
+#define UART_MC_OE_OFST (6)
+#define UART_MC_SP_MSK (0x20)
+#define UART_MC_SP_OFST (5)
+#define UART_MC_EP_MSK (0x10)
+#define UART_MC_EP_OFST (4)
+#define UART_MC_PE_MSK (0x08)
+#define UART_MC_PE_OFST (3)
+#define UART_MC_ST_MSK (0x04)
+#define UART_MC_ST_ONE (0x0)
+#define UART_MC_ST_TWO (0x04)
+#define UART_MC_ST_OFST (2)
+#define UART_MC_CLS_MSK (0x03)
+#define UART_MC_CLS_OFST (0)
+#define UART_MC_CLS_CHARLEN_5 (0)
+#define UART_MC_CLS_CHARLEN_6 (1)
+#define UART_MC_CLS_CHARLEN_7 (2)
+#define UART_MC_CLS_CHARLEN_8 (3)
+
+#define UART_MCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x2c ))
+#define UART_MCR_AC_MSK (0x80)
+#define UART_MCR_AC_OFST (7)
+#define UART_MCR_AR_MSK (0x40)
+#define UART_MCR_AR_OFST (6)
+#define UART_MCR_BR_MSK (0x20)
+#define UART_MCR_BR_OFST (5)
+#define UART_MCR_LB_MSK (0x10)
+#define UART_MCR_LB_OFST (4)
+#define UART_MCR_DCD_MSK (0x08)
+#define UART_MCR_DCD_OFST (3)
+#define UART_MCR_RI_MSK (0x04)
+#define UART_MCR_RI_OFST (2)
+#define UART_MCR_DTR_MSK (0x02)
+#define UART_MCR_DTR_OFST (1)
+#define UART_MCR_RTS_MSK (0x01)
+#define UART_MCR_RTS_OFST (0)
+
+#define UART_MSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x30 ))
+#define UART_MSR_DCD_MSK (0x80)
+#define UART_MSR_DCD_OFST (7)
+#define UART_MSR_RI_MSK (0x40)
+#define UART_MSR_RI_OFST (6)
+#define UART_MSR_DSR_MSK (0x20)
+#define UART_MSR_DSR_OFST (5)
+#define UART_MSR_CTS_MSK (0x10)
+#define UART_MSR_CTS_OFST (4)
+#define UART_MSR_DDCD_MSK (0x08)
+#define UART_MSR_DDCD_OFST (3)
+#define UART_MSR_TERI_MSK (0x04)
+#define UART_MSR_TERI_OFST (2)
+#define UART_MSR_DDSR_MSK (0x02)
+#define UART_MSR_DDSR_OFST (1)
+#define UART_MSR_DCTS_MSK (0x01)
+#define UART_MSR_DCTS_OFST (0)
+
+#define UART_DIV_LO(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x34 ))
+#define UART_DIV_LO_DIV_MSK (0xff)
+#define UART_DIV_LO_DIV_OFST (0)
+
+#define UART_DIV_HI(BASE_ADDR) (UART00_TYPE (BASE_ADDR  + 0x38 ))
+#define UART_DIV_HI_DIV_MSK (0xff)
+#define UART_DIV_HI_DIV_OFST (0)
+
+#endif /* __UART00_H */
diff --git a/include/asm-arm/arch-epxa10db/uncompress.h b/include/asm-arm/arch-epxa10db/uncompress.h
new file mode 100644
index 000000000000..d33ad6a93749
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/uncompress.h
@@ -0,0 +1,54 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include "asm/arch/platform.h"
+#include "asm/arch/hardware.h"
+#define UART00_TYPE (volatile unsigned int*)
+#include "asm/arch/uart00.h"
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		while ((*UART_TSR(EXC_UART00_BASE) &
+		       UART_TSR_TX_LEVEL_MSK)==15)
+			barrier();
+
+		*UART_TD(EXC_UART00_BASE) = *s;
+
+		if (*s == '\n') {
+			while ((*UART_TSR(EXC_UART00_BASE) &
+			       UART_TSR_TX_LEVEL_MSK)==15)
+				barrier();
+
+			*UART_TD(EXC_UART00_BASE) = '\r';
+		}
+		s++;
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-epxa10db/vmalloc.h b/include/asm-arm/arch-epxa10db/vmalloc.h
new file mode 100644
index 000000000000..d31ef8584760
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/vmalloc.h
@@ -0,0 +1,31 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10db/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h
new file mode 100644
index 000000000000..8021f81f0742
--- /dev/null
+++ b/include/asm-arm/arch-h720x/boards.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-h720x/boards.h
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the board specific defines for various devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
+#error Do not include this file directly. Include asm/hardware.h instead !
+#endif
+
+/* Hynix H7202 developer board specific device defines */
+#ifdef CONFIG_ARCH_H7202
+
+/* FLASH */
+#define FLASH_VIRT		0xd0000000
+#define FLASH_PHYS		0x00000000
+#define FLASH_SIZE		0x02000000
+
+/* onboard LAN controller */
+# define ETH0_PHYS		0x08000000
+
+/* Touch screen defines */
+/* GPIO Port */
+#define PEN_GPIO		GPIO_B_VIRT
+/* Bitmask for pen down interrupt */
+#define PEN_INT_BIT		(1<<7)
+/* Bitmask for pen up interrupt */
+#define PEN_ENA_BIT		(1<<6)
+/* pen up interrupt */
+#define IRQ_PEN			IRQ_MUX_GPIOB(7)
+
+#endif
+
+/* Hynix H7201 developer board specific device defines */
+#if defined (CONFIG_ARCH_H7201)
+/* ROM DISK SPACE */
+#define ROM_DISK_BASE           0xc1800000
+#define ROM_DISK_START          0x41800000
+#define ROM_DISK_SIZE           0x00700000
+
+/* SRAM DISK SPACE */
+#define SRAM_DISK_BASE          0xf1000000
+#define SRAM_DISK_START         0x04000000
+#define SRAM_DISK_SIZE          0x00400000
+#endif
+
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S
new file mode 100644
index 000000000000..82822d362733
--- /dev/null
+++ b/include/asm-arm/arch-h720x/debug-macro.S
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/arch-h720x/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1  	       @ MMU enabled?
+		moveq   \rx, #io_phys	       @ physical base address
+		movne   \rx, #io_virt	       @ virtual address
+		add     \rx, \rx, #0x00020000   @ UART1
+		.endm
+
+		.macro  senduart,rd,rx
+		str     \rd, [\rx, #0x0]        @ UARTDR
+
+		.endm
+
+		.macro  waituart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
+		bne     1001b
+		.endm
+
+		.macro  busyuart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
+		bne     1001b
+		.endm
diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h
new file mode 100644
index 000000000000..bfc6636679f7
--- /dev/null
+++ b/include/asm-arm/arch-h720x/dma.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/arch-h720x/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS	3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS	4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S
new file mode 100644
index 000000000000..8f165648e2af
--- /dev/null
+++ b/include/asm-arm/arch-h720x/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * include/asm-arm/arch-h720x/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+		@ we could use the id register on H7202, but this is not
+		@ properly updated when we come back from asm_do_irq
+		@ without a previous return from interrupt
+		@ (see loops below in irq_svc, irq_usr)
+		@ We see unmasked pending ints only, as the masked pending ints
+		@ are not visible here
+
+		mov     \base, #0xf0000000	       @ base register
+		orr     \base, \base, #0x24000	       @ irqbase
+		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+		ldr	\tmp, =0x001fffff
+#else
+		mvn     \tmp, #0xc0000000
+#endif
+		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
+		mov     \irqnr, #0
+
+		mov     \tmp, #0xff00
+		orr     \tmp, \tmp, #0xff
+		tst     \irqstat, \tmp
+		addeq   \irqnr, \irqnr, #16
+		moveq   \irqstat, \irqstat, lsr #16
+		tst     \irqstat, #255
+		addeq   \irqnr, \irqnr, #8
+		moveq   \irqstat, \irqstat, lsr #8
+		tst     \irqstat, #15
+		addeq   \irqnr, \irqnr, #4
+		moveq   \irqstat, \irqstat, lsr #4
+		tst     \irqstat, #3
+		addeq   \irqnr, \irqnr, #2
+		moveq   \irqstat, \irqstat, lsr #2
+		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tst     \irqstat, #1		       @ bit 0 should be set
+		.endm
+
+		.macro  irq_prio_table
+		.endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h
new file mode 100644
index 000000000000..49d4f6bd3080
--- /dev/null
+++ b/include/asm-arm/arch-h720x/h7201-regs.h
@@ -0,0 +1,67 @@
+/*
+ * linux/include/asm-arm/arch-h720x/h7201-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
+#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
+
+/*
+ * PCMCIA
+ */
+#define PCMCIA0_ATT_BASE        0xe5000000
+#define PCMCIA0_ATT_SIZE        0x00200000
+#define PCMCIA0_ATT_START       0x20000000
+#define PCMCIA0_MEM_BASE        0xe5200000
+#define PCMCIA0_MEM_SIZE        0x00200000
+#define PCMCIA0_MEM_START       0x24000000
+#define PCMCIA0_IO_BASE         0xe5400000
+#define PCMCIA0_IO_SIZE         0x00200000
+#define PCMCIA0_IO_START        0x28000000
+
+#define PCMCIA1_ATT_BASE        0xe5600000
+#define PCMCIA1_ATT_SIZE        0x00200000
+#define PCMCIA1_ATT_START       0x30000000
+#define PCMCIA1_MEM_BASE        0xe5800000
+#define PCMCIA1_MEM_SIZE        0x00200000
+#define PCMCIA1_MEM_START       0x34000000
+#define PCMCIA1_IO_BASE         0xe5a00000
+#define PCMCIA1_IO_SIZE         0x00200000
+#define PCMCIA1_IO_START        0x38000000
+
+#define PRIME3C_BASE            0xf0050000
+#define PRIME3C_SIZE            0x00001000
+#define PRIME3C_START           0x10000000
+
+/* VGA Controller */
+#define VGA_RAMBASE 		0x50
+#define VGA_TIMING0 		0x60
+#define VGA_TIMING1 		0x64
+#define VGA_TIMING2 		0x68
+#define VGA_TIMING3 		0x6c
+
+#define LCD_CTRL_VGA_ENABLE   	0x00000100
+#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
+#define LCD_CTRL_VGA_4BPP    	0x00000000
+#define LCD_CTRL_VGA_8BPP    	0x00000200
+#define LCD_CTRL_VGA_16BPP   	0x00000300
+#define LCD_CTRL_SHARE_DMA    	0x00000800
+#define LCD_CTRL_VDE          	0x00100000
+#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
+#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
+
+#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h
new file mode 100644
index 000000000000..43d8ba8a6013
--- /dev/null
+++ b/include/asm-arm/arch-h720x/h7202-regs.h
@@ -0,0 +1,155 @@
+/*
+ * linux/include/asm-arm/arch-h720x/h7202-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_OFS		0x2d000
+#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
+#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
+#define SERIAL3_OFS		0x2e000
+#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
+#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
+
+/* Matrix Keyboard Controller */
+#define KBD_VIRT		(IO_VIRT + 0x22000)
+#define KBD_KBCR		0x00
+#define KBD_KBSC		0x04
+#define KBD_KBTR		0x08
+#define KBD_KBVR0		0x0C
+#define KBD_KBVR1		0x10
+#define KBD_KBSR		0x18
+
+#define KBD_KBCR_SCANENABLE	(1 << 7)
+#define KBD_KBCR_NPOWERDOWN	(1 << 2)
+#define KBD_KBCR_CLKSEL_MASK	(3)
+#define KBD_KBCR_CLKSEL_PCLK2	0x0
+#define KBD_KBCR_CLKSEL_PCLK128	0x1
+#define KBD_KBCR_CLKSEL_PCLK256	0x2
+#define KBD_KBCR_CLKSEL_PCLK512	0x3
+
+#define KBD_KBSR_INTR		(1 << 0)
+#define KBD_KBSR_WAKEUP		(1 << 1)
+
+/* USB device controller */
+
+#define USBD_BASE		(IO_VIRT + 0x12000)
+#define USBD_LENGTH		0x3C
+
+#define USBD_GCTRL		0x00
+#define USBD_EPCTRL		0x04
+#define USBD_INTMASK		0x08
+#define USBD_INTSTAT		0x0C
+#define USBD_PWR		0x10
+#define USBD_DMARXTX		0x14
+#define USBD_DEVID		0x18
+#define USBD_DEVCLASS		0x1C
+#define USBD_INTCLASS		0x20
+#define USBD_SETUP0		0x24
+#define USBD_SETUP1		0x28
+#define USBD_ENDP0RD		0x2C
+#define USBD_ENDP0WT		0x30
+#define USBD_ENDP1RD		0x34
+#define USBD_ENDP2WT		0x38
+
+/* PS/2 port */
+#define PSDATA 0x00
+#define PSSTAT 0x04
+#define PSSTAT_TXEMPTY (1<<0)
+#define PSSTAT_TXBUSY (1<<1)
+#define PSSTAT_RXFULL (1<<2)
+#define PSSTAT_RXBUSY (1<<3)
+#define PSSTAT_CLKIN (1<<4)
+#define PSSTAT_DATAIN (1<<5)
+#define PSSTAT_PARITY (1<<6)
+
+#define PSCONF 0x08
+#define PSCONF_ENABLE (1<<0)
+#define PSCONF_TXINTEN (1<<2)
+#define PSCONF_RXINTEN (1<<3)
+#define PSCONF_FORCECLKLOW (1<<4)
+#define PSCONF_FORCEDATLOW (1<<5)
+#define PSCONF_LCE (1<<6)
+
+#define PSINTR 0x0C
+#define PSINTR_TXINT (1<<0)
+#define PSINTR_RXINT (1<<1)
+#define PSINTR_PAR (1<<2)
+#define PSINTR_RXTO (1<<3)
+#define PSINTR_TXTO (1<<4)
+
+#define PSTDLO 0x10 /* clk low before start transmission */
+#define PSTPRI 0x14 /* PRI clock */
+#define PSTXMT 0x18 /* maximum transmission time */
+#define PSTREC 0x20 /* maximum receive time */
+#define PSPWDN 0x3c
+
+/* ADC converter */
+#define ADC_BASE 		(IO_VIRT + 0x29000)
+#define ADC_CR 			0x00
+#define ADC_TSCTRL 		0x04
+#define ADC_BT_CTRL 		0x08
+#define ADC_MC_CTRL		0x0C
+#define ADC_STATUS		0x10
+
+/* ADC control register bits */
+#define ADC_CR_PW_CTRL 		0x80
+#define ADC_CR_DIRECTC		0x04
+#define ADC_CR_CONTIME_NO	0x00
+#define ADC_CR_CONTIME_2	0x04
+#define ADC_CR_CONTIME_4	0x08
+#define ADC_CR_CONTIME_ADE	0x0c
+#define ADC_CR_LONGCALTIME	0x01
+
+/* ADC touch panel register bits */
+#define ADC_TSCTRL_ENABLE 	0x80
+#define ADC_TSCTRL_INTR   	0x40
+#define	ADC_TSCTRL_SWBYPSS	0x20
+#define ADC_TSCTRL_SWINVT	0x10
+#define ADC_TSCTRL_S400   	0x03
+#define ADC_TSCTRL_S200   	0x02
+#define ADC_TSCTRL_S100   	0x01
+#define ADC_TSCTRL_S50    	0x00
+
+/* ADC Interrupt Status Register bits */
+#define ADC_STATUS_TS_BIT	0x80
+#define ADC_STATUS_MBT_BIT	0x40
+#define ADC_STATUS_BBT_BIT	0x20
+#define ADC_STATUS_MIC_BIT	0x10
+
+/* Touch data registers */
+#define ADC_TS_X0X1  		0x30
+#define ADC_TS_X2X3		0x34
+#define ADC_TS_Y0Y1		0x38
+#define ADC_TS_Y2Y3  		0x3c
+#define ADC_TS_X4X5  		0x40
+#define ADC_TS_X6X7  		0x44
+#define ADC_TS_Y4Y5		0x48
+#define ADC_TS_Y6Y7		0x50
+
+/* battery data */
+#define ADC_MB_DATA		0x54
+#define ADC_BB_DATA		0x58
+
+/* Sound data register */
+#define ADC_SD_DAT0 		0x60
+#define ADC_SD_DAT1		0x64
+#define ADC_SD_DAT2		0x68
+#define ADC_SD_DAT3		0x6c
+#define ADC_SD_DAT4		0x70
+#define ADC_SD_DAT5		0x74
+#define ADC_SD_DAT6		0x78
+#define ADC_SD_DAT7		0x7c
diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h
new file mode 100644
index 000000000000..dfb778906a9f
--- /dev/null
+++ b/include/asm-arm/arch-h720x/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * linux/include/asm-arm/arch-h720x/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT			0xf0000000	/* IO peripherals */
+#define IO_PHYS			0x80000000
+#define IO_SIZE			0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT		(GPIO_VIRT(0))
+#define GPIO_B_VIRT		(GPIO_VIRT(1))
+#define GPIO_C_VIRT		(GPIO_VIRT(2))
+#define GPIO_D_VIRT		(GPIO_VIRT(3))
+#define GPIO_E_VIRT		(GPIO_VIRT(4))
+#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2	(1<<5)
+#define AMULSEL_USOUT2	(1<<6)
+#define AMULSEL_USIN3	(1<<13)
+#define AMULSEL_USOUT3	(1<<14)
+#define AMULSEL_IRDIN	(1<<15)
+#define AMULSEL_IRDOUT	(1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA		0x00
+#define GPIO_DIR		0x04
+#define GPIO_MASK		0x08
+#define GPIO_STAT		0x0C
+#define GPIO_EDGE		0x10
+#define GPIO_CLR		0x14
+#define GPIO_POL		0x18
+#define GPIO_EN			0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT		(IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER		0x00
+#define IRQC_ISR		0x04
+
+/* timer unit */
+#define TIMER_VIRT		(IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD   		0x00
+#define TM0_COUNT    		0x08
+#define TM0_CTRL     		0x10
+#define TM1_PERIOD   		0x20
+#define TM1_COUNT    		0x28
+#define TM1_CTRL     		0x30
+#define TM2_PERIOD   		0x40
+#define TM2_COUNT    		0x48
+#define TM2_CTRL     		0x50
+#define TIMER_TOPCTRL		0x60
+#define TIMER_TOPSTAT		0x64
+#define T64_COUNTL		0x80
+#define T64_COUNTH		0x84
+#define T64_CTRL		0x88
+#define T64_BASEL		0x94
+#define T64_BASEH		0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT		0x1
+#define TSTAT_T1INT		0x2
+#define TSTAT_T2INT		0x4
+#define TSTAT_T3INT		0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START  		0x1
+#define TM_REPEAT 		0x2
+#define TM_RESET  		0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR  	0x1
+#define ENABLE_TM1_INTR  	0x2
+#define ENABLE_TM2_INTR  	0x4
+#define TIMER_ENABLE_BIT 	0x8
+#define ENABLE_TIMER64   	0x10
+#define ENABLE_TIMER64_INT	0x20
+
+/* PMU & PLL */
+#define PMU_BASE 		(IO_VIRT + 0x1000)
+#define PMU_MODE		0x00
+#define PMU_STAT   		0x20
+#define PMU_PLL_CTRL 		0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW		0x00
+#define PMU_MODE_RUN		0x01
+#define PMU_MODE_IDLE		0x02
+#define PMU_MODE_SLEEP		0x03
+#define PMU_MODE_INIT		0x04
+#define PMU_MODE_DEEPSLEEP	0x07
+#define PMU_MODE_WAKEUP		0x08
+
+/* PMU ... */
+#define PLL_2_EN		0x8000
+#define PLL_1_EN		0x4000
+#define PLL_3_MUTE		0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET		0x00010000
+#define PLL_CTRL_MASK23		0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE 		(IO_VIRT + 0x10000)
+#define LCD_CTRL 		0x00
+#define LCD_STATUS		0x04
+#define LCD_STATUS_M		0x08
+#define LCD_INTERRUPT		0x0C
+#define LCD_DBAR		0x10
+#define LCD_DCAR		0x14
+#define LCD_TIMING0 		0x20
+#define LCD_TIMING1 		0x24
+#define LCD_TIMING2 		0x28
+#define LCD_TEST		0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE   	0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
+#define LCD_CTRL_LCD_4BPP    	0x00000000
+#define LCD_CTRL_LCD_8BPP    	0x00000002
+#define LCD_CTRL_LCD_16BPP   	0x00000004
+#define LCD_CTRL_LCD_BW		0x00000008
+#define LCD_CTRL_LCD_TFT	0x00000010
+#define LCD_CTRL_BGR		0x00001000
+#define LCD_CTRL_LCD_VCOMP	0x00080000
+#define LCD_CTRL_LCD_MONO8	0x00200000
+#define LCD_CTRL_LCD_PWR	0x00400000
+#define LCD_CTRL_LCD_BLE	0x00800000
+#define LCD_CTRL_LDBUSEN	0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS		0x20000
+#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS		0x21000
+#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE		0x30
+#define SERIAL_ENABLE_EN	(1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE 		(0)	/* for inb, outb and friends */
+#define PCIO_VIRT		PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
new file mode 100644
index 000000000000..68814828c9a7
--- /dev/null
+++ b/include/asm-arm/arch-h720x/io.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/arch-h720x/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ *  09-19-2001	JJKIM
+ *  		Created from linux/include/asm-arm/arch-l7200/io.h
+ *
+ *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
+ *  		re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/arch/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/include/asm-arm/arch-h720x/irq.h b/include/asm-arm/arch-h720x/irq.h
new file mode 100644
index 000000000000..b3821e957aa4
--- /dev/null
+++ b/include/asm-arm/arch-h720x/irq.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-h720x/irq.h
+ *
+ * Copyright (C) 2000-2002 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ */
+
+#ifndef __ASM_ARCH_IRQ_H
+#define __ASM_ARCH_IRQ_H
+
+extern void __init h720x_init_irq (void);
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h
new file mode 100644
index 000000000000..8244413988be
--- /dev/null
+++ b/include/asm-arm/arch-h720x/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * linux/include/asm-arm/arch-h720x/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU		0		/* 0x000001 */
+#define IRQ_DMA		1 		/* 0x000002 */
+#define IRQ_LCD		2		/* 0x000004 */
+#define IRQ_VGA		3 		/* 0x000008 */
+#define IRQ_PCMCIA1 	4 		/* 0x000010 */
+#define IRQ_PCMCIA2 	5 		/* 0x000020 */
+#define IRQ_AFE		6 		/* 0x000040 */
+#define IRQ_AIC		7 		/* 0x000080 */
+#define IRQ_KEYBOARD 	8 		/* 0x000100 */
+#define IRQ_TIMER0	9 		/* 0x000200 */
+#define IRQ_RTC		10		/* 0x000400 */
+#define IRQ_SOUND	11		/* 0x000800 */
+#define IRQ_USB		12		/* 0x001000 */
+#define IRQ_IrDA 	13		/* 0x002000 */
+#define IRQ_UART0	14		/* 0x004000 */
+#define IRQ_UART1	15		/* 0x008000 */
+#define IRQ_SPI		16		/* 0x010000 */
+#define IRQ_GPIOA 	17		/* 0x020000 */
+#define IRQ_GPIOB	18		/* 0x040000 */
+#define IRQ_GPIOC	19		/* 0x080000 */
+#define IRQ_GPIOD	20		/* 0x100000 */
+#define IRQ_CommRX	21		/* 0x200000 */
+#define IRQ_CommTX	22		/* 0x400000 */
+#define IRQ_Soft	23		/* 0x800000 */
+
+#define NR_GLBL_IRQS	24
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU		0		/* 0x00000001 */
+#define IRQ_DMA		1		/* 0x00000002 */
+#define IRQ_LCD		2		/* 0x00000004 */
+#define IRQ_SOUND	3		/* 0x00000008 */
+#define IRQ_I2S		4		/* 0x00000010 */
+#define IRQ_USB 	5		/* 0x00000020 */
+#define IRQ_MMC 	6		/* 0x00000040 */
+#define IRQ_RTC 	7		/* 0x00000080 */
+#define IRQ_UART0 	8		/* 0x00000100 */
+#define IRQ_UART1 	9		/* 0x00000200 */
+#define IRQ_UART2 	10		/* 0x00000400 */
+#define IRQ_UART3 	11		/* 0x00000800 */
+#define IRQ_KBD 	12		/* 0x00001000 */
+#define IRQ_PS2 	13		/* 0x00002000 */
+#define IRQ_AIC 	14		/* 0x00004000 */
+#define IRQ_TIMER0 	15		/* 0x00008000 */
+#define IRQ_TIMERX 	16		/* 0x00010000 */
+#define IRQ_WDT 	17		/* 0x00020000 */
+#define IRQ_CAN0 	18		/* 0x00040000 */
+#define IRQ_CAN1 	19		/* 0x00080000 */
+#define IRQ_EXT0 	20		/* 0x00100000 */
+#define IRQ_EXT1 	21		/* 0x00200000 */
+#define IRQ_GPIOA 	22		/* 0x00400000 */
+#define IRQ_GPIOB 	23		/* 0x00800000 */
+#define IRQ_GPIOC 	24		/* 0x01000000 */
+#define IRQ_GPIOD 	25		/* 0x02000000 */
+#define IRQ_GPIOE 	26		/* 0x04000000 */
+#define IRQ_COMMRX 	27		/* 0x08000000 */
+#define IRQ_COMMTX 	28		/* 0x10000000 */
+#define IRQ_SMC 	29		/* 0x20000000 */
+#define IRQ_Soft 	30		/* 0x40000000 */
+#define IRQ_RESERVED1 	31		/* 0x80000000 */
+#define NR_GLBL_IRQS	32
+
+#define NR_TIMERX_IRQS	3
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+			(1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
new file mode 100644
index 000000000000..5633447af268
--- /dev/null
+++ b/include/asm-arm/arch-h720x/memory.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/asm-arm/arch-h720x/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ *    ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET	(0x40000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus__is_a_macro
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt__is_a_macro
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-h720x/param.h b/include/asm-arm/arch-h720x/param.h
new file mode 100644
index 000000000000..2b80235f9847
--- /dev/null
+++ b/include/asm-arm/arch-h720x/param.h
@@ -0,0 +1,10 @@
+/*
+ * linux/include/asm-arm/arch-h720x/param.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+#endif
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
new file mode 100644
index 000000000000..0b025e227ec2
--- /dev/null
+++ b/include/asm-arm/arch-h720x/system.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-h720x/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * linux/include/asm-arm/arch-h720x/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <asm/hardware.h>
+
+static void arch_idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	__asm__ __volatile__(
+	"mov	r0, r0\n\t"
+	"mov	r0, r0");
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h
new file mode 100644
index 000000000000..48a391c4080f
--- /dev/null
+++ b/include/asm-arm/arch-h720x/timex.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-h720x/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE		3686400
+
+#endif
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h
new file mode 100644
index 000000000000..2fffacf85a01
--- /dev/null
+++ b/include/asm-arm/arch-h720x/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * linux/include/asm-arm/arch-h720x/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/arch/hardware.h>
+
+#define LSR 	0x14
+#define TEMPTY 	0x40
+
+static void putstr(const char *s)
+{
+	char c;
+	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+	while ( (c = *s++) != '\0') {
+		/* wait until transmit buffer is empty */
+		while((p[LSR] & TEMPTY) == 0x0);
+		/* write next character */
+		*p = c;
+
+		if(c == '\n') {
+			while((p[LSR] & TEMPTY) == 0x0);
+			*p = '\r';
+		}
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h
new file mode 100644
index 000000000000..4af523a5e189
--- /dev/null
+++ b/include/asm-arm/arch-h720x/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ * linux/include/asm-arm/arch-h720x/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
new file mode 100644
index 000000000000..83f552f7bcc1
--- /dev/null
+++ b/include/asm-arm/arch-imx/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-imx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orr	\rx, \rx, #0x00200000
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h
new file mode 100644
index 000000000000..dbdc01780413
--- /dev/null
+++ b/include/asm-arm/arch-imx/dma.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	0
+
+/*
+ * DMA registration
+ */
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 3,
+	DMA_PRIO_LOW = 6
+} imx_dma_prio;
+
+int imx_request_dma(char *name, imx_dma_prio prio,
+		    void (*irq_handler) (int, void *, struct pt_regs *),
+		    void (*err_handler) (int, void *, struct pt_regs *),
+		    void *data);
+
+void imx_free_dma(int dma_ch);
+
+
+#define DMA_REQ_UART3_T        2
+#define DMA_REQ_UART3_R        3
+#define DMA_REQ_SSI2_T         4
+#define DMA_REQ_SSI2_R         5
+#define DMA_REQ_CSI_STAT       6
+#define DMA_REQ_CSI_R          7
+#define DMA_REQ_MSHC           8
+#define DMA_REQ_DSPA_DCT_DOUT  9
+#define DMA_REQ_DSPA_DCT_DIN  10
+#define DMA_REQ_DSPA_MAC      11
+#define DMA_REQ_EXT           12
+#define DMA_REQ_SDHC          13
+#define DMA_REQ_SPI1_R        14
+#define DMA_REQ_SPI1_T        15
+#define DMA_REQ_SSI_T         16
+#define DMA_REQ_SSI_R         17
+#define DMA_REQ_ASP_DAC       18
+#define DMA_REQ_ASP_ADC       19
+#define DMA_REQ_USP_EP(x)    (20+(x))
+#define DMA_REQ_SPI2_R        26
+#define DMA_REQ_SPI2_T        27
+#define DMA_REQ_UART2_T       28
+#define DMA_REQ_UART2_R       29
+#define DMA_REQ_UART1_T       30
+#define DMA_REQ_UART1_R       31
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
new file mode 100644
index 000000000000..b40ea7cf88ec
--- /dev/null
+++ b/include/asm-arm/arch-imx/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-imx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqnr, [\irqstat, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number"
+		mov	\irqnr, \irqnr, lsr #16
+ 		ldr	\irqstat, =1	@ dummy compare
+		ldr	\base, =0xFFFF		// invalid interrupt
+		cmp	\irqnr, \base
+		bne	1001f
+		ldr	\irqstat, =0
+1001:
+		tst	\irqstat, #1	@ to make the condition code = TRUE
+		.endm
+
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
new file mode 100644
index 000000000000..adffb6acf42a
--- /dev/null
+++ b/include/asm-arm/arch-imx/hardware.h
@@ -0,0 +1,99 @@
+/*
+ *  linux/include/asm-arm/arch-imx/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+/* get frequencies in Hz */
+extern unsigned int imx_get_system_clk(void);
+extern unsigned int imx_get_mcu_clk(void);
+extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */
+extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12]         */
+extern unsigned int imx_get_perclk3(void); /* SSI                      */
+extern unsigned int imx_get_hclk(void);    /* SDRAM, CSI, Memory Stick,*/
+                                           /* I2C, DMA                 */
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
new file mode 100644
index 000000000000..f32c203952cf
--- /dev/null
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -0,0 +1,548 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ *  Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
+
+/* PLL registers */
+#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
+#define CSCR_SYSTEM_SEL (1<<16)
+
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+#define CSCR_MPLL_RESTART (1<<21)
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT   (1<<7)
+#define GPIO_IN    (0<<7)
+#define GPIO_PUEN  (1<<8)
+
+#define GPIO_PF    (0<<9)
+#define GPIO_AF    (1<<9)
+
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN   (0<<10)
+#define GPIO_BIN   (1<<10)
+#define GPIO_CIN   (2<<10)
+#define GPIO_GPIO  (3<<10)
+
+#define GPIO_AOUT  (1<<12)
+#define GPIO_BOUT  (1<<13)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_PF_A24           ( GPIO_PORTA | GPIO_PF | 0 )
+#define PA0_AIN_SPI2_CLK     ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD    ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS     ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
+#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
+#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
+#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
+#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
+#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK    ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS      ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD    ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD    ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD    ( GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ *  DMA Controller
+ */
+#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
+#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
+#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
+#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
+#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
+#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
+#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
+#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
+#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
+#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
+#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
+#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
+#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
+#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
+#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
+#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
+#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
+#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff )
+#define CNTR_CNT(x)        ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
+#define CCR_DMOD_2D        ( 0x1 << 12 )
+#define CCR_DMOD_FIFO      ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
+#define CCR_SMOD_2D        ( 0x1 << 10 )
+#define CCR_SMOD_FIFO      ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        ( 0x0 << 6 )
+#define CCR_DSIZ_8         ( 0x1 << 6 )
+#define CCR_DSIZ_16        ( 0x2 << 6 )
+#define CCR_SSIZ_32        ( 0x0 << 4 )
+#define CCR_SSIZ_8         ( 0x1 << 4 )
+#define CCR_SSIZ_16        ( 0x2 << 4 )
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ *  Interrupt controller
+ */
+
+#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
+#define INTCNTL_FIAD       (1<<19)
+#define INTCNTL_NIAD       (1<<20)
+
+#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
+#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
+#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
+#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
+#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
+
+/*
+ *  General purpose timers
+ */
+#define IMX_TCTL(x)        __REG( 0x00 + (x))
+#define TCTL_SWR           (1<<15)
+#define TCTL_FRR           (1<<8)
+#define TCTL_CAP_RIS       (1<<6)
+#define TCTL_CAP_FAL       (2<<6)
+#define TCTL_CAP_RIS_FAL   (3<<6)
+#define TCTL_OM            (1<<5)
+#define TCTL_IRQEN         (1<<4)
+#define TCTL_CLK_PCLK1     (1<<1)
+#define TCTL_CLK_PCLK1_16  (2<<1)
+#define TCTL_CLK_TIN       (3<<1)
+#define TCTL_CLK_32        (4<<1)
+#define TCTL_TEN           (1<<0)
+
+#define IMX_TPRER(x)       __REG( 0x04 + (x))
+#define IMX_TCMP(x)        __REG( 0x08 + (x))
+#define IMX_TCR(x)         __REG( 0x0C + (x))
+#define IMX_TCN(x)         __REG( 0x10 + (x))
+#define IMX_TSTAT(x)       __REG( 0x14 + (x))
+#define TSTAT_CAPT         (1<<1)
+#define TSTAT_COMP         (1<<0)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y)    ( (y) & 0x1ff )
+
+#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x)	( (x) & 0x3ff )
+
+#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1        (1<<31)
+#define CPOS_CC0        (1<<30)
+#define CPOS_OP         (1<<28)
+#define CPOS_CXP(x)     (((x) & 3ff) << 16)
+#define CPOS_CYP(y)     ((y) & 0x1ff)
+
+#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN     (1<<31)
+#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
+#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
+#define LCWHB_BD(x)     ((x) & 0xff)
+
+#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT         (1<<31)
+#define PCR_COLOR       (1<<30)
+#define PCR_PBSIZ_1     (0<<28)
+#define PCR_PBSIZ_2     (1<<28)
+#define PCR_PBSIZ_4     (2<<28)
+#define PCR_PBSIZ_8     (3<<28)
+#define PCR_BPIX_1      (0<<25)
+#define PCR_BPIX_2      (1<<25)
+#define PCR_BPIX_4      (2<<25)
+#define PCR_BPIX_8      (3<<25)
+#define PCR_BPIX_12     (4<<25)
+#define PCR_BPIX_16     (4<<25)
+#define PCR_PIXPOL      (1<<24)
+#define PCR_FLMPOL      (1<<23)
+#define PCR_LPPOL       (1<<22)
+#define PCR_CLKPOL      (1<<21)
+#define PCR_OEPOL       (1<<20)
+#define PCR_SCLKIDLE    (1<<19)
+#define PCR_END_SEL     (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS      (1<<16)
+#define PCR_ACD_SEL     (1<<15)
+#define PCR_ACD(x)      (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL    (1<<7)
+#define PCR_SHARP       (1<<6)
+#define PCR_PCD(x)      ((x) & 0x3f)
+
+#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x)      ((x) & 1f)
+
+#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK      (1<<15)
+#define PWMR_SCR1       (1<<10)
+#define PWMR_SCR0       (1<<9)
+#define PWMR_CC_EN      (1<<8)
+#define PWMR_PW(x)      ((x) & 0xff)
+
+#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST     (1<<31)
+#define DMACR_HM(x)     (((x) & 0xf) << 16)
+#define DMACR_TM(x)     ((x) &0xf)
+
+#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN		(1<<1)
+#define RMCR_SELF_REF		(1<<0)
+
+#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN  (1<<2)
+#define LCDICR_INT_CON  (1)
+
+#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF     (1<<1)
+#define LCDISR_BOF     (1<<0)
+
+/*
+ *  UART Module. Takes the UART base address as argument
+ */
+#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */
+#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */
+#define UCR1(x)  __REG( 0x80 + (x)) /* Control Register 1 */
+#define UCR2(x)  __REG( 0x84 + (x)) /* Control Register 2 */
+#define UCR3(x)  __REG( 0x88 + (x)) /* Control Register 3 */
+#define UCR4(x)  __REG( 0x8c + (x)) /* Control Register 4 */
+#define UFCR(x)  __REG( 0x90 + (x)) /* FIFO Control Register */
+#define USR1(x)  __REG( 0x94 + (x)) /* Status Register 1 */
+#define USR2(x)  __REG( 0x98 + (x)) /* Status Register 2 */
+#define UESC(x)  __REG( 0x9c + (x)) /* Escape Character Register */
+#define UTIM(x)  __REG( 0xa0 + (x)) /* Escape Timer Register */
+#define UBIR(x)  __REG( 0xa4 + (x)) /* BRM Incremental Register */
+#define UBMR(x)  __REG( 0xa8 + (x)) /* BRM Modulator Register */
+#define UBRC(x)  __REG( 0xac + (x)) /* Baud Rate Count Register */
+#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */
+#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */
+#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */
+#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */
+#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */
+#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */
+#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */
+#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */
+#define UTS(x)   __REG( 0xd0 + (x)) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define  URXD_CHARRDY    (1<<15)
+#define  URXD_ERR        (1<<14)
+#define  URXD_OVRRUN     (1<<13)
+#define  URXD_FRMERR     (1<<12)
+#define  URXD_BRK        (1<<11)
+#define  URXD_PRERR      (1<<10)
+#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
+#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
+#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
+#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
+#define  UCR1_RRDYEN     (1<<9)	 /* Recv ready interrupt enable */
+#define  UCR1_RDMAEN     (1<<8)	 /* Recv ready DMA enable */
+#define  UCR1_IREN       (1<<7)	 /* Infrared interface enable */
+#define  UCR1_TXMPTYEN   (1<<6)	 /* Transimitter empty interrupt enable */
+#define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
+#define  UCR1_SNDBRK     (1<<4)	 /* Send break */
+#define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
+#define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
+#define  UCR1_DOZE       (1<<1)	 /* Doze */
+#define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
+#define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
+#define  UCR2_IRTS  	 (1<<14) /* Ignore RTS pin */
+#define  UCR2_CTSC  	 (1<<13) /* CTS pin control */
+#define  UCR2_CTS        (1<<12) /* Clear to send */
+#define  UCR2_ESCEN      (1<<11) /* Escape enable */
+#define  UCR2_PREN       (1<<8)  /* Parity enable */
+#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
+#define  UCR2_STPB       (1<<6)	 /* Stop */
+#define  UCR2_WS         (1<<5)	 /* Word size */
+#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
+#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
+#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
+#define  UCR2_SRST 	 (1<<0)	 /* SW reset */
+#define  UCR3_DTREN 	 (1<<13) /* DTR interrupt enable */
+#define  UCR3_PARERREN   (1<<12) /* Parity enable */
+#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
+#define  UCR3_DSR        (1<<10) /* Data set ready */
+#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
+#define  UCR3_RI         (1<<8)  /* Ring indicator */
+#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
+#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
+#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
+#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
+#define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
+#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
+#define  UCR4_INVR  	 (1<<9)  /* Inverted infrared reception */
+#define  UCR4_ENIRI 	 (1<<8)  /* Serial infrared interrupt enable */
+#define  UCR4_WKEN  	 (1<<7)  /* Wake interrupt enable */
+#define  UCR4_REF16 	 (1<<6)  /* Ref freq 16 MHz */
+#define  UCR4_IRSC  	 (1<<5)  /* IR special case */
+#define  UCR4_TCEN  	 (1<<3)  /* Transmit complete interrupt enable */
+#define  UCR4_BKEN  	 (1<<2)  /* Break condition interrupt enable */
+#define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
+#define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
+#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
+#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
+#define  USR1_RTSS  	 (1<<14) /* RTS pin status */
+#define  USR1_TRDY  	 (1<<13) /* Transmitter ready interrupt/dma flag */
+#define  USR1_RTSD  	 (1<<12) /* RTS delta */
+#define  USR1_ESCF  	 (1<<11) /* Escape seq interrupt flag */
+#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
+#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
+#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
+#define  USR1_RXDS  	 (1<<6)	 /* Receiver idle interrupt flag */
+#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
+#define  USR1_AWAKE 	 (1<<4)	 /* Aysnc wake interrupt flag */
+#define  USR2_ADET  	 (1<<15) /* Auto baud rate detect complete */
+#define  USR2_TXFE  	 (1<<14) /* Transmit buffer FIFO empty */
+#define  USR2_DTRF  	 (1<<13) /* DTR edge interrupt flag */
+#define  USR2_IDLE  	 (1<<12) /* Idle condition */
+#define  USR2_IRINT 	 (1<<8)	 /* Serial infrared interrupt flag */
+#define  USR2_WAKE  	 (1<<7)	 /* Wake */
+#define  USR2_RTSF  	 (1<<4)	 /* RTS edge interrupt flag */
+#define  USR2_TXDC  	 (1<<3)	 /* Transmitter complete */
+#define  USR2_BRCD  	 (1<<2)	 /* Break condition */
+#define  USR2_ORE        (1<<1)	 /* Overrun error */
+#define  USR2_RDR        (1<<0)	 /* Recv data ready */
+#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
+#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
+#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
+#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
+#define  UTS_TXFULL 	 (1<<4)	 /* TxFIFO full */
+#define  UTS_RXFULL 	 (1<<3)	 /* RxFIFO full */
+#define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
+
+#endif				// _IMX_REGS_H
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
new file mode 100644
index 000000000000..28a4cca6a4cb
--- /dev/null
+++ b/include/asm-arm/arch-imx/io.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h
new file mode 100644
index 000000000000..545e065d2325
--- /dev/null
+++ b/include/asm-arm/arch-imx/irq.h
@@ -0,0 +1,20 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/irq.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define fixup_irq(i)	(i)
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
new file mode 100644
index 000000000000..238197cfb9d9
--- /dev/null
+++ b/include/asm-arm/arch-imx/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <asm/arch/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
new file mode 100644
index 000000000000..116a91fa14f1
--- /dev/null
+++ b/include/asm-arm/arch-imx/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-imx/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	(0x08000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus__is_a_macro
+#define __virt_to_bus(x)	(x - PAGE_OFFSET +  PHYS_OFFSET)
+#define __bus_to_virt__is_a_macro
+#define __bus_to_virt(x)	(x -  PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
new file mode 100644
index 000000000000..d90fa4b49ce1
--- /dev/null
+++ b/include/asm-arm/arch-imx/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/arch-imx/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS		0x10000000
+#define MX1ADS_FLASH_SIZE		(16*1024*1024)
+
+#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h
new file mode 100644
index 000000000000..7c724f03333e
--- /dev/null
+++ b/include/asm-arm/arch-imx/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-imx/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
new file mode 100644
index 000000000000..c645fe9afb9d
--- /dev/null
+++ b/include/asm-arm/arch-imx/system.h
@@ -0,0 +1,40 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h
new file mode 100644
index 000000000000..d65ab3cd5d5d
--- /dev/null
+++ b/include/asm-arm/arch-imx/timex.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/include/asm-arm/imx/timex.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/arch/hardware.h>
+#define CLOCK_TICK_RATE		(CLK32)
+
+#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
new file mode 100644
index 000000000000..096077f2750b
--- /dev/null
+++ b/include/asm-arm/arch-imx/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void
+putstr(const char *s)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (*s) {
+		while ( !(UART(USR2) & USR2_TXFE) )
+			barrier();
+
+		UART(TXR) = *s;
+
+		if (*s == '\n') {
+			while ( !(UART(USR2) & USR2_TXFE) )
+				barrier();
+
+			UART(TXR) = '\r';
+		}
+		s++;
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
new file mode 100644
index 000000000000..252038f48163
--- /dev/null
+++ b/include/asm-arm/arch-imx/vmalloc.h
@@ -0,0 +1,32 @@
+/*
+ *  linux/include/asm-arm/arch-imx/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-integrator/bits.h b/include/asm-arm/arch-integrator/bits.h
new file mode 100644
index 000000000000..09b024e0496a
--- /dev/null
+++ b/include/asm-arm/arch-integrator/bits.h
@@ -0,0 +1,61 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Bit field definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __bits_h
+#define __bits_h                        1
+
+#define BIT0                            0x00000001
+#define BIT1                            0x00000002
+#define BIT2                            0x00000004
+#define BIT3                            0x00000008
+#define BIT4                            0x00000010
+#define BIT5                            0x00000020
+#define BIT6                            0x00000040
+#define BIT7                            0x00000080
+#define BIT8                            0x00000100
+#define BIT9                            0x00000200
+#define BIT10                           0x00000400
+#define BIT11                           0x00000800
+#define BIT12                           0x00001000
+#define BIT13                           0x00002000
+#define BIT14                           0x00004000
+#define BIT15                           0x00008000
+#define BIT16                           0x00010000
+#define BIT17                           0x00020000
+#define BIT18                           0x00040000
+#define BIT19                           0x00080000
+#define BIT20                           0x00100000
+#define BIT21                           0x00200000
+#define BIT22                           0x00400000
+#define BIT23                           0x00800000
+#define BIT24                           0x01000000
+#define BIT25                           0x02000000
+#define BIT26                           0x04000000
+#define BIT27                           0x08000000
+#define BIT28                           0x10000000
+#define BIT29                           0x20000000
+#define BIT30                           0x40000000
+#define BIT31                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/include/asm-arm/arch-integrator/cm.h b/include/asm-arm/arch-integrator/cm.h
new file mode 100644
index 000000000000..d31c1a71f781
--- /dev/null
+++ b/include/asm-arm/arch-integrator/cm.h
@@ -0,0 +1,36 @@
+/*
+ * update the core module control register.
+ */
+void cm_control(u32, u32);
+
+#define CM_CTRL_LED			(1 << 0)
+#define CM_CTRL_nMBDET			(1 << 1)
+#define CM_CTRL_REMAP			(1 << 2)
+#define CM_CTRL_RESET			(1 << 3)
+
+/*
+ * Integrator/AP,PP2 specific
+ */
+#define CM_CTRL_HIGHVECTORS		(1 << 4)
+#define CM_CTRL_BIGENDIAN		(1 << 5)
+#define CM_CTRL_FASTBUS			(1 << 6)
+#define CM_CTRL_SYNC			(1 << 7)
+
+/*
+ * ARM926/946/966 Integrator/CP specific
+ */
+#define CM_CTRL_LCDBIASEN		(1 << 8)
+#define CM_CTRL_LCDBIASUP		(1 << 9)
+#define CM_CTRL_LCDBIASDN		(1 << 10)
+#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
+#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD1	(3 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD2	(4 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA		(7 << 11)
+#define CM_CTRL_LCDEN0			(1 << 14)
+#define CM_CTRL_LCDEN1			(1 << 15)
+#define CM_CTRL_STATIC1			(1 << 16)
+#define CM_CTRL_STATIC2			(1 << 17)
+#define CM_CTRL_STATIC			(1 << 18)
+#define CM_CTRL_n24BITEN		(1 << 19)
+#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
new file mode 100644
index 000000000000..484a1aa47098
--- /dev/null
+++ b/include/asm-arm/arch-integrator/debug-macro.S
@@ -0,0 +1,38 @@
+/* linux/include/asm-arm/arch-integrator/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/amba_serial.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x16000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x16000000 >> 4
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
new file mode 100644
index 000000000000..7171792290bd
--- /dev/null
+++ b/include/asm-arm/arch-integrator/dma.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
new file mode 100644
index 000000000000..44f7ee613194
--- /dev/null
+++ b/include/asm-arm/arch-integrator/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-integrator/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+		mov	\irqnr, #IRQ_PIC_START
+		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+		teq	\irqstat, #0
+		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+		moveq	\irqnr, #IRQ_CIC_START
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+		.endm
+
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
new file mode 100644
index 000000000000..be2716eeaa02
--- /dev/null
+++ b/include/asm-arm/arch-integrator/hardware.h
@@ -0,0 +1,57 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <asm/arch/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO 
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+/*
+ * Similar to above, but for PCI addresses (memory, IO, Config and the
+ * V3 chip itself).  WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+
+#endif
+
diff --git a/include/asm-arm/arch-integrator/impd1.h b/include/asm-arm/arch-integrator/impd1.h
new file mode 100644
index 000000000000..d75de4b14237
--- /dev/null
+++ b/include/asm-arm/arch-integrator/impd1.h
@@ -0,0 +1,18 @@
+#define IMPD1_OSC1	0x00
+#define IMPD1_OSC2	0x04
+#define IMPD1_LOCK	0x08
+#define IMPD1_LEDS	0x0c
+#define IMPD1_INT	0x10
+#define IMPD1_SW	0x14
+#define IMPD1_CTRL	0x18
+
+#define IMPD1_CTRL_DISP_LCD	(0 << 0)
+#define IMPD1_CTRL_DISP_VGA	(1 << 0)
+#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
+#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
+#define IMPD1_CTRL_DISP_MASK	(7 << 0)
+
+struct device;
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
+
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
new file mode 100644
index 000000000000..fbea8be67d26
--- /dev/null
+++ b/include/asm-arm/arch-integrator/io.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
+
+#endif
diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h
new file mode 100644
index 000000000000..ba7b3afee445
--- /dev/null
+++ b/include/asm-arm/arch-integrator/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* 
+ *  Interrupt numbers
+ */
+#define IRQ_PIC_START			0
+#define IRQ_SOFTINT			0
+#define IRQ_UARTINT0			1
+#define IRQ_UARTINT1			2
+#define IRQ_KMIINT0			3
+#define IRQ_KMIINT1			4
+#define IRQ_TIMERINT0			5
+#define IRQ_TIMERINT1			6
+#define IRQ_TIMERINT2			7
+#define IRQ_RTCINT			8
+#define IRQ_AP_EXPINT0			9
+#define IRQ_AP_EXPINT1			10
+#define IRQ_AP_EXPINT2			11
+#define IRQ_AP_EXPINT3			12
+#define IRQ_AP_PCIINT0			13
+#define IRQ_AP_PCIINT1			14
+#define IRQ_AP_PCIINT2			15
+#define IRQ_AP_PCIINT3			16
+#define IRQ_AP_V3INT			17
+#define IRQ_AP_CPINT0			18
+#define IRQ_AP_CPINT1			19
+#define IRQ_AP_LBUSTIMEOUT 		20
+#define IRQ_AP_APCINT			21
+#define IRQ_CP_CLCDCINT			22
+#define IRQ_CP_MMCIINT0			23
+#define IRQ_CP_MMCIINT1			24
+#define IRQ_CP_AACIINT			25
+#define IRQ_CP_CPPLDINT			26
+#define IRQ_CP_ETHINT			27
+#define IRQ_CP_TSPENINT			28
+#define IRQ_PIC_END			31
+
+#define IRQ_CIC_START			32
+#define IRQ_CM_SOFTINT			32
+#define IRQ_CM_COMMRX			33
+#define IRQ_CM_COMMTX			34
+#define IRQ_CIC_END			34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START			35
+#define IRQ_SIC_CP_SOFTINT		35
+#define IRQ_SIC_CP_RI0			36
+#define IRQ_SIC_CP_RI1			37
+#define IRQ_SIC_CP_CARDIN		38
+#define IRQ_SIC_CP_LMINT0		39
+#define IRQ_SIC_CP_LMINT1		40
+#define IRQ_SIC_CP_LMINT2		41
+#define IRQ_SIC_CP_LMINT3		42
+#define IRQ_SIC_CP_LMINT4		43
+#define IRQ_SIC_CP_LMINT5		44
+#define IRQ_SIC_CP_LMINT6		45
+#define IRQ_SIC_CP_LMINT7		46
+#define IRQ_SIC_END			46
+
+#define NR_IRQS                         47
+
diff --git a/include/asm-arm/arch-integrator/lm.h b/include/asm-arm/arch-integrator/lm.h
new file mode 100644
index 000000000000..28186b6f2c09
--- /dev/null
+++ b/include/asm-arm/arch-integrator/lm.h
@@ -0,0 +1,23 @@
+
+struct lm_device {
+	struct device		dev;
+	struct resource		resource;
+	unsigned int		irq;
+	unsigned int		id;
+};
+
+struct lm_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct lm_device *);
+	void			(*remove)(struct lm_device *);
+	int			(*suspend)(struct lm_device *, pm_message_t);
+	int			(*resume)(struct lm_device *);
+};
+
+int lm_driver_register(struct lm_driver *drv);
+void lm_driver_unregister(struct lm_driver *drv);
+
+int lm_device_register(struct lm_device *dev);
+
+#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
+#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
new file mode 100644
index 000000000000..2087ea7d28a9
--- /dev/null
+++ b/include/asm-arm/arch-integrator/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x00000000UL)
+#define BUS_OFFSET	(0x80000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-integrator/param.h b/include/asm-arm/arch-integrator/param.h
new file mode 100644
index 000000000000..afa582ff3717
--- /dev/null
+++ b/include/asm-arm/arch-integrator/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h
new file mode 100644
index 000000000000..6b67e41669f4
--- /dev/null
+++ b/include/asm-arm/arch-integrator/platform.h
@@ -0,0 +1,465 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/**************************************************************************
+ * * Copyright © ARM Limited 1998.  All rights reserved.
+ * ***********************************************************************/
+/* ************************************************************************
+ * 
+ *   Integrator address map
+ * 
+ * 	NOTE: This is a multi-hosted header file for use with uHAL and
+ * 	      supported debuggers.
+ * 
+ * 	$Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
+ * 
+ * ***********************************************************************/
+
+#ifndef __address_h
+#define __address_h                     1
+
+/* ========================================================================
+ *  Integrator definitions
+ * ========================================================================
+ * ------------------------------------------------------------------------
+ *  Memory definitions
+ * ------------------------------------------------------------------------
+ *  Integrator memory map
+ * 
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/* 
+ *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ *  fitted can be found in HDR_STAT.
+ * 
+ *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ *  the minimum amount of SSRAM fitted on any core module.
+ * 
+ *  New Core Modules also alias the SSRAM.
+ * 
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/* 
+ *  SDRAM is a SIMM therefore the size is not known.
+ * 
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/* ------------------------------------------------------------------------
+ *  Integrator header card registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+
+/* ------------------------------------------------------------------------
+ *  Integrator system registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+
+/* 
+ *  System Controller
+ * 
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/* 
+ *  External Bus Interface
+ * 
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000 
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/* 
+ *  LED's & Switches
+ * 
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+
+#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
+
+/* ------------------------------------------------------------------------
+ *  KMI keyboard/mouse definitions
+ * ------------------------------------------------------------------------
+ */
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE		
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
+
+/* ------------------------------------------------------------------------
+ *  Where in the memory map does PCI live?
+ * ------------------------------------------------------------------------
+ *  This represents a fairly liberal usage of address space.  Even though
+ *  the V3 only has two windows (therefore we need to map stuff on the fly),
+ *  we maintain the same addresses, even if they're not mapped.
+ * 
+ */
+#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
+/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
+ */
+#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
+/*  unused (128-16)M from B1000000-B7FFFFFF
+ */
+#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
+/*  unused ((128-16)M - 64K) from XXX
+ */
+#define PHYS_PCI_V3_BASE                0x62000000
+
+#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE	
+
+/* 'export' these to UHAL */
+#define UHAL_PCI_IO                     PCI_IO_BASE
+#define UHAL_PCI_MEM                    PCI_MEM_BASE
+#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
+#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
+#define UHAL_PCI_MAX_SLOT               20
+	
+/* ========================================================================
+ *  Start of uHAL definitions
+ * ========================================================================
+ */
+
+/* ------------------------------------------------------------------------
+ *  Integrator Interrupt Controllers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	INTEGRATOR_HDR_IC 
+ * 
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/* ------------------------------------------------------------------------
+ *  Interrupts
+ * ------------------------------------------------------------------------
+ * 
+ *  
+ *  Each Core Module has two interrupts controllers, one on the core module
+ *  itself and one in the system controller on the motherboard.  The
+ *  READ_INT macro in target.s reads both interrupt controllers and returns
+ *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
+ *  and bits 24 to 31 are from the core module.
+ *  
+ *  The following definitions relate to the bitmask returned by READ_INT.
+ * 
+ */
+
+/* ------------------------------------------------------------------------
+ *  LED's - The header LED is not accessible via the uHAL API
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/* 
+ *  Memory definitions - run uHAL out of SSRAM.
+ * 
+ */
+#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
+#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
+#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/* 
+ *  Timer definitions
+ * 
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ * 
+ *  Timer 0 runs at bus frequency and therefore could vary and currently
+ *  uHAL can't handle that.
+ * 
+ */
+
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  24
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif
+
+/* 	END */
diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h
new file mode 100644
index 000000000000..8ea442237d20
--- /dev/null
+++ b/include/asm-arm/arch-integrator/system.h
@@ -0,0 +1,44 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/cm.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h
new file mode 100644
index 000000000000..87a762818ba2
--- /dev/null
+++ b/include/asm-arm/arch-integrator/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/timex.h
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h
new file mode 100644
index 000000000000..3957402741d3
--- /dev/null
+++ b/include/asm-arm/arch-integrator/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		while (AMBA_UART_FR & (1 << 5));
+
+		AMBA_UART_DR = *s;
+
+		if (*s == '\n') {
+			while (AMBA_UART_FR & (1 << 5));
+
+			AMBA_UART_DR = '\r';
+		}
+		s++;
+	}
+	while (AMBA_UART_FR & (1 << 3));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h
new file mode 100644
index 000000000000..50e9aee79486
--- /dev/null
+++ b/include/asm-arm/arch-integrator/vmalloc.h
@@ -0,0 +1,31 @@
+/*
+ *  linux/include/asm-arm/arch-integrator/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S
new file mode 100644
index 000000000000..cc15f80ebd9a
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/debug-macro.S
@@ -0,0 +1,48 @@
+/* linux/include/asm-arm/arch-iop3xx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xfe000000	@ physical
+#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+#elif defined(CONFIG_ARCH_IOP331)
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x000fe000	@ Physical Base
+		movne	\rx, #0
+		orr	\rx, \rx, #0xfe000000
+		orr	\rx, \rx, #0x00f00000	@ Virtual Base
+		orr	\rx, \rx, #0x00001700   @ location of the UART
+#else
+#error Unknown IOP3XX implementation
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #0x5]
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
+1001:		ldrb	\rd, [\rx, #0x6]
+		tst	\rd, #0x10
+		beq	1001b
+#endif
+		.endm
diff --git a/include/asm-arm/arch-iop3xx/dma.h b/include/asm-arm/arch-iop3xx/dma.h
new file mode 100644
index 000000000000..797f9e6fc745
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/dma.h
@@ -0,0 +1,16 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/dma.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IOP3XX_DMA_H_P
+#define _IOP3XX_DMA_H_P
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#endif /* _ASM_ARCH_DMA_H_P */
diff --git a/include/asm-arm/arch-iop3xx/entry-macro.S b/include/asm-arm/arch-iop3xx/entry-macro.S
new file mode 100644
index 000000000000..e2ce7f5467c8
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/entry-macro.S
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-iop3xx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP3xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#if defined(CONFIG_ARCH_IOP321)
+		.macro  disable_fiq
+		.endm
+
+		/*
+		 * Note: only deal with normal interrupts, not FIQ
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqnr, #0
+		mrc     p6, 0, \irqstat, c8, c0, 0      @ Read IINTSRC
+		cmp     \irqstat, #0
+		beq     1001f
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr,\base,\irqnr
+		add     \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
+1001:
+		.endm
+
+#elif defined(CONFIG_ARCH_IOP331)
+		.macro  disable_fiq
+		.endm
+
+		/*
+		 * Note: only deal with normal interrupts, not FIQ
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqnr, #0
+		mrc     p6, 0, \irqstat, c4, c0, 0      @ Read IINTSRC0
+		cmp     \irqstat, #0
+		bne     1002f
+		mrc     p6, 0, \irqstat, c5, c0, 0      @ Read IINTSRC1
+		cmp	\irqstat, #0
+		beq	1001f
+		clz	\irqnr, \irqstat
+		rsbs    \irqnr,\irqnr,#31   @ recommend by RMK
+		add	\irqnr,\irqnr,#IRQ_IOP331_XINT8
+		b	1001f
+1002:	clz     \irqnr, \irqstat
+		rsbs    \irqnr,\irqnr,#31   @ recommend by RMK
+		add     \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT
+1001:
+		.endm
+
+#endif
+
diff --git a/include/asm-arm/arch-iop3xx/hardware.h b/include/asm-arm/arch-iop3xx/hardware.h
new file mode 100644
index 000000000000..3b138171d086
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+
+#define pcibios_assign_all_busses() 1
+
+
+/*
+ * The min PCI I/O and MEM space are dependent on what specific
+ * chipset/platform we are running on, so instead of hardcoding with
+ * #ifdefs, we just fill these in the platform level PCI init code.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long iop3xx_pcibios_min_io;
+extern unsigned long iop3xx_pcibios_min_mem;
+
+extern unsigned int processor_id;
+#endif
+
+/*
+ * We just set these to zero since they are really bogus anyways
+ */
+#define PCIBIOS_MIN_IO      (iop3xx_pcibios_min_io)
+#define PCIBIOS_MIN_MEM     (iop3xx_pcibios_min_mem)
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop321.h"
+#include "iop331.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80321.h"
+#include "iq31244.h"
+#include "iq80331.h"
+#include "iq80332.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h
new file mode 100644
index 000000000000..2761dfd8694d
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/io.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/io.h
+ *
+ *  Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-iop3xx/iop321-irqs.h b/include/asm-arm/arch-iop3xx/iop321-irqs.h
new file mode 100644
index 000000000000..2fcc1654cb9d
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iop321-irqs.h
@@ -0,0 +1,100 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _IOP321_IRQS_H_
+#define _IOP321_IRQS_H_
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IOP321_IRQ_OFS		0
+#define IOP321_IRQ(x)		(IOP321_IRQ_OFS + (x))
+
+/*
+ * On IRQ or FIQ register
+ */
+#define IRQ_IOP321_DMA0_EOT	IOP321_IRQ(0)
+#define IRQ_IOP321_DMA0_EOC	IOP321_IRQ(1)
+#define IRQ_IOP321_DMA1_EOT	IOP321_IRQ(2)
+#define IRQ_IOP321_DMA1_EOC	IOP321_IRQ(3)
+#define IRQ_IOP321_RSVD_4	IOP321_IRQ(4)
+#define IRQ_IOP321_RSVD_5	IOP321_IRQ(5)
+#define IRQ_IOP321_AA_EOT	IOP321_IRQ(6)
+#define IRQ_IOP321_AA_EOC	IOP321_IRQ(7)
+#define IRQ_IOP321_CORE_PMON	IOP321_IRQ(8)
+#define IRQ_IOP321_TIMER0	IOP321_IRQ(9)
+#define IRQ_IOP321_TIMER1	IOP321_IRQ(10)
+#define IRQ_IOP321_I2C_0	IOP321_IRQ(11)
+#define IRQ_IOP321_I2C_1	IOP321_IRQ(12)
+#define IRQ_IOP321_MESSAGING	IOP321_IRQ(13)
+#define IRQ_IOP321_ATU_BIST	IOP321_IRQ(14)
+#define IRQ_IOP321_PERFMON	IOP321_IRQ(15)
+#define IRQ_IOP321_CORE_PMU	IOP321_IRQ(16)
+#define IRQ_IOP321_BIU_ERR	IOP321_IRQ(17)
+#define IRQ_IOP321_ATU_ERR	IOP321_IRQ(18)
+#define IRQ_IOP321_MCU_ERR	IOP321_IRQ(19)
+#define IRQ_IOP321_DMA0_ERR	IOP321_IRQ(20)
+#define IRQ_IOP321_DMA1_ERR	IOP321_IRQ(21)
+#define IRQ_IOP321_RSVD_22	IOP321_IRQ(22)
+#define IRQ_IOP321_AA_ERR	IOP321_IRQ(23)
+#define IRQ_IOP321_MSG_ERR	IOP321_IRQ(24)
+#define IRQ_IOP321_SSP		IOP321_IRQ(25)
+#define IRQ_IOP321_RSVD_26	IOP321_IRQ(26)
+#define IRQ_IOP321_XINT0	IOP321_IRQ(27)
+#define IRQ_IOP321_XINT1	IOP321_IRQ(28)
+#define IRQ_IOP321_XINT2	IOP321_IRQ(29)
+#define IRQ_IOP321_XINT3	IOP321_IRQ(30)
+#define IRQ_IOP321_HPI		IOP321_IRQ(31)
+
+#define NR_IOP321_IRQS		(IOP321_IRQ(31) + 1)
+
+#define NR_IRQS			NR_IOP321_IRQS
+
+
+/*
+ * Interrupts available on the IQ80321 board
+ */
+
+/*
+ * On board devices
+ */
+#define	IRQ_IQ80321_I82544	IRQ_IOP321_XINT0
+#define IRQ_IQ80321_UART	IRQ_IOP321_XINT1
+
+/*
+ * PCI interrupts
+ */
+#define	IRQ_IQ80321_INTA	IRQ_IOP321_XINT0
+#define	IRQ_IQ80321_INTB	IRQ_IOP321_XINT1
+#define	IRQ_IQ80321_INTC	IRQ_IOP321_XINT2
+#define	IRQ_IQ80321_INTD	IRQ_IOP321_XINT3
+
+/*
+ * Interrupts on the IQ31244 board
+ */
+
+/*
+ * On board devices
+ */
+#define IRQ_IQ31244_UART	IRQ_IOP321_XINT1
+#define	IRQ_IQ31244_I82546	IRQ_IOP321_XINT0
+#define IRQ_IQ31244_SATA	IRQ_IOP321_XINT2
+#define	IRQ_IQ31244_PCIX_SLOT	IRQ_IOP321_XINT3
+
+/*
+ * PCI interrupts
+ */
+#define	IRQ_IQ31244_INTA	IRQ_IOP321_XINT0
+#define	IRQ_IQ31244_INTB	IRQ_IOP321_XINT1
+#define	IRQ_IQ31244_INTC	IRQ_IOP321_XINT2
+#define	IRQ_IQ31244_INTD	IRQ_IOP321_XINT3
+
+#endif // _IOP321_IRQ_H_
diff --git a/include/asm-arm/arch-iop3xx/iop321.h b/include/asm-arm/arch-iop3xx/iop321.h
new file mode 100644
index 000000000000..200621ff3690
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iop321.h
@@ -0,0 +1,345 @@
+/*
+ * linux/include/asm/arch-iop3xx/iop321.h
+ *
+ * Intel IOP321 Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IOP321_HW_H_
+#define _IOP321_HW_H_
+
+
+/*
+ * This is needed for mixed drivers that need to work on all
+ * IOP3xx variants but behave slightly differently on each.
+ */
+#ifndef __ASSEMBLY__
+#ifdef	CONFIG_ARCH_IOP321
+#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
+#else
+#define	iop_is_321()	0
+#endif
+#endif
+
+/*
+ * IOP321 I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP321_PCI_IO_WINDOW_SIZE   0x00010000
+#define IOP321_PCI_LOWER_IO_PA      0x90000000
+#define IOP321_PCI_LOWER_IO_VA      0xfe000000
+#define IOP321_PCI_LOWER_IO_BA      (*IOP321_OIOWTVR)
+#define IOP321_PCI_UPPER_IO_PA      (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1)
+#define IOP321_PCI_UPPER_IO_VA      (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1)
+#define IOP321_PCI_UPPER_IO_BA      (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1)
+#define IOP321_PCI_IO_OFFSET        (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA)
+
+//#define IOP321_PCI_MEM_WINDOW_SIZE  (~*IOP321_IALR1 + 1)
+#define IOP321_PCI_MEM_WINDOW_SIZE  0x04000000 /* 64M outbound window */
+#define IOP321_PCI_LOWER_MEM_PA     0x80000000
+#define IOP321_PCI_LOWER_MEM_BA     (*IOP321_OMWTVR0)
+#define IOP321_PCI_UPPER_MEM_PA     (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1)
+#define IOP321_PCI_UPPER_MEM_BA     (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1)
+#define IOP321_PCI_MEM_OFFSET       (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA)
+
+
+/*
+ * IOP321 chipset registers
+ */
+#define IOP321_VIRT_MEM_BASE 0xfeffe000  /* chip virtual mem address*/
+#define IOP321_PHYS_MEM_BASE 0xffffe000  /* chip physical memory address */
+#define IOP321_REG_ADDR(reg) (IOP321_VIRT_MEM_BASE | (reg))
+
+/* Reserved 0x00000000 through 0x000000FF */
+
+/* Address Translation Unit 0x00000100 through 0x000001FF */
+#define IOP321_ATUVID     (volatile u16 *)IOP321_REG_ADDR(0x00000100)
+#define IOP321_ATUDID     (volatile u16 *)IOP321_REG_ADDR(0x00000102)
+#define IOP321_ATUCMD     (volatile u16 *)IOP321_REG_ADDR(0x00000104)
+#define IOP321_ATUSR      (volatile u16 *)IOP321_REG_ADDR(0x00000106)
+#define IOP321_ATURID     (volatile u8  *)IOP321_REG_ADDR(0x00000108)
+#define IOP321_ATUCCR     (volatile u32 *)IOP321_REG_ADDR(0x00000109)
+#define IOP321_ATUCLSR    (volatile u8  *)IOP321_REG_ADDR(0x0000010C)
+#define IOP321_ATULT      (volatile u8  *)IOP321_REG_ADDR(0x0000010D)
+#define IOP321_ATUHTR     (volatile u8  *)IOP321_REG_ADDR(0x0000010E)
+#define IOP321_ATUBIST    (volatile u8  *)IOP321_REG_ADDR(0x0000010F)
+#define IOP321_IABAR0     (volatile u32 *)IOP321_REG_ADDR(0x00000110)
+#define IOP321_IAUBAR0    (volatile u32 *)IOP321_REG_ADDR(0x00000114)
+#define IOP321_IABAR1     (volatile u32 *)IOP321_REG_ADDR(0x00000118)
+#define IOP321_IAUBAR1    (volatile u32 *)IOP321_REG_ADDR(0x0000011C)
+#define IOP321_IABAR2     (volatile u32 *)IOP321_REG_ADDR(0x00000120)
+#define IOP321_IAUBAR2    (volatile u32 *)IOP321_REG_ADDR(0x00000124)
+#define IOP321_ASVIR      (volatile u16 *)IOP321_REG_ADDR(0x0000012C)
+#define IOP321_ASIR       (volatile u16 *)IOP321_REG_ADDR(0x0000012E)
+#define IOP321_ERBAR      (volatile u32 *)IOP321_REG_ADDR(0x00000130)
+/* Reserved 0x00000134 through 0x0000013B */
+#define IOP321_ATUILR     (volatile u8  *)IOP321_REG_ADDR(0x0000013C)
+#define IOP321_ATUIPR     (volatile u8  *)IOP321_REG_ADDR(0x0000013D)
+#define IOP321_ATUMGNT    (volatile u8  *)IOP321_REG_ADDR(0x0000013E)
+#define IOP321_ATUMLAT    (volatile u8  *)IOP321_REG_ADDR(0x0000013F)
+#define IOP321_IALR0      (volatile u32 *)IOP321_REG_ADDR(0x00000140)
+#define IOP321_IATVR0     (volatile u32 *)IOP321_REG_ADDR(0x00000144)
+#define IOP321_ERLR       (volatile u32 *)IOP321_REG_ADDR(0x00000148)
+#define IOP321_ERTVR      (volatile u32 *)IOP321_REG_ADDR(0x0000014C)
+#define IOP321_IALR1      (volatile u32 *)IOP321_REG_ADDR(0x00000150)
+#define IOP321_IALR2      (volatile u32 *)IOP321_REG_ADDR(0x00000154)
+#define IOP321_IATVR2     (volatile u32 *)IOP321_REG_ADDR(0x00000158)
+#define IOP321_OIOWTVR    (volatile u32 *)IOP321_REG_ADDR(0x0000015C)
+#define IOP321_OMWTVR0    (volatile u32 *)IOP321_REG_ADDR(0x00000160)
+#define IOP321_OUMWTVR0   (volatile u32 *)IOP321_REG_ADDR(0x00000164)
+#define IOP321_OMWTVR1    (volatile u32 *)IOP321_REG_ADDR(0x00000168)
+#define IOP321_OUMWTVR1   (volatile u32 *)IOP321_REG_ADDR(0x0000016C)
+/* Reserved 0x00000170 through 0x00000177*/
+#define IOP321_OUDWTVR    (volatile u32 *)IOP321_REG_ADDR(0x00000178)
+/* Reserved 0x0000017C through 0x0000017F*/
+#define IOP321_ATUCR      (volatile u32 *)IOP321_REG_ADDR(0x00000180)
+#define IOP321_PCSR       (volatile u32 *)IOP321_REG_ADDR(0x00000184)
+#define IOP321_ATUISR     (volatile u32 *)IOP321_REG_ADDR(0x00000188)
+#define IOP321_ATUIMR     (volatile u32 *)IOP321_REG_ADDR(0x0000018C)
+#define IOP321_IABAR3     (volatile u32 *)IOP321_REG_ADDR(0x00000190)
+#define IOP321_IAUBAR3    (volatile u32 *)IOP321_REG_ADDR(0x00000194)
+#define IOP321_IALR3      (volatile u32 *)IOP321_REG_ADDR(0x00000198)
+#define IOP321_IATVR3     (volatile u32 *)IOP321_REG_ADDR(0x0000019C)
+/* Reserved 0x000001A0 through 0x000001A3*/
+#define IOP321_OCCAR      (volatile u32 *)IOP321_REG_ADDR(0x000001A4)
+/* Reserved 0x000001A8 through 0x000001AB*/
+#define IOP321_OCCDR      (volatile u32 *)IOP321_REG_ADDR(0x000001AC)
+/* Reserved 0x000001B0 through 0x000001BB*/
+#define IOP321_PDSCR      (volatile u32 *)IOP321_REG_ADDR(0x000001BC)
+#define IOP321_PMCAPID    (volatile u8  *)IOP321_REG_ADDR(0x000001C0)
+#define IOP321_PMNEXT     (volatile u8  *)IOP321_REG_ADDR(0x000001C1)
+#define IOP321_APMCR      (volatile u16 *)IOP321_REG_ADDR(0x000001C2)
+#define IOP321_APMCSR     (volatile u16 *)IOP321_REG_ADDR(0x000001C4)
+/* Reserved 0x000001C6 through 0x000001DF */
+#define IOP321_PCIXCAPID  (volatile u8  *)IOP321_REG_ADDR(0x000001E0)
+#define IOP321_PCIXNEXT   (volatile u8  *)IOP321_REG_ADDR(0x000001E1)
+#define IOP321_PCIXCMD    (volatile u16 *)IOP321_REG_ADDR(0x000001E2)
+#define IOP321_PCIXSR     (volatile u32 *)IOP321_REG_ADDR(0x000001E4)
+#define IOP321_PCIIRSR    (volatile u32 *)IOP321_REG_ADDR(0x000001EC)
+
+/* Messaging Unit 0x00000300 through 0x000003FF */
+
+/* Reserved 0x00000300 through 0x0000030c */
+#define IOP321_IMR0       (volatile u32 *)IOP321_REG_ADDR(0x00000310)
+#define IOP321_IMR1       (volatile u32 *)IOP321_REG_ADDR(0x00000314)
+#define IOP321_OMR0       (volatile u32 *)IOP321_REG_ADDR(0x00000318)
+#define IOP321_OMR1       (volatile u32 *)IOP321_REG_ADDR(0x0000031C)
+#define IOP321_IDR        (volatile u32 *)IOP321_REG_ADDR(0x00000320)
+#define IOP321_IISR       (volatile u32 *)IOP321_REG_ADDR(0x00000324)
+#define IOP321_IIMR       (volatile u32 *)IOP321_REG_ADDR(0x00000328)
+#define IOP321_ODR        (volatile u32 *)IOP321_REG_ADDR(0x0000032C)
+#define IOP321_OISR       (volatile u32 *)IOP321_REG_ADDR(0x00000330)
+#define IOP321_OIMR       (volatile u32 *)IOP321_REG_ADDR(0x00000334)
+/* Reserved 0x00000338 through 0x0000034F */
+#define IOP321_MUCR       (volatile u32 *)IOP321_REG_ADDR(0x00000350)
+#define IOP321_QBAR       (volatile u32 *)IOP321_REG_ADDR(0x00000354)
+/* Reserved 0x00000358 through 0x0000035C */
+#define IOP321_IFHPR      (volatile u32 *)IOP321_REG_ADDR(0x00000360)
+#define IOP321_IFTPR      (volatile u32 *)IOP321_REG_ADDR(0x00000364)
+#define IOP321_IPHPR      (volatile u32 *)IOP321_REG_ADDR(0x00000368)
+#define IOP321_IPTPR      (volatile u32 *)IOP321_REG_ADDR(0x0000036C)
+#define IOP321_OFHPR      (volatile u32 *)IOP321_REG_ADDR(0x00000370)
+#define IOP321_OFTPR      (volatile u32 *)IOP321_REG_ADDR(0x00000374)
+#define IOP321_OPHPR      (volatile u32 *)IOP321_REG_ADDR(0x00000378)
+#define IOP321_OPTPR      (volatile u32 *)IOP321_REG_ADDR(0x0000037C)
+#define IOP321_IAR        (volatile u32 *)IOP321_REG_ADDR(0x00000380)
+
+#define IOP321_IIxR_MASK	0x7f /* masks all */
+#define IOP321_IIxR_IRI		0x40 /* RC Index Register Interrupt */
+#define IOP321_IIxR_OFQF	0x20 /* RC Output Free Q Full (ERROR) */
+#define IOP321_IIxR_ipq		0x10 /* RC Inbound Post Q (post) */
+#define IOP321_IIxR_ERRDI	0x08 /* RO Error Doorbell Interrupt */
+#define IOP321_IIxR_IDI		0x04 /* RO Inbound Doorbell Interrupt */
+#define IOP321_IIxR_IM1		0x02 /* RC Inbound Message 1 Interrupt */
+#define IOP321_IIxR_IM0		0x01 /* RC Inbound Message 0 Interrupt */
+
+/* Reserved 0x00000384 through 0x000003FF */
+
+/* DMA Controller 0x00000400 through 0x000004FF */
+#define IOP321_DMA0_CCR   (volatile u32 *)IOP321_REG_ADDR(0x00000400)
+#define IOP321_DMA0_CSR   (volatile u32 *)IOP321_REG_ADDR(0x00000404)
+#define IOP321_DMA0_DAR   (volatile u32 *)IOP321_REG_ADDR(0x0000040C)
+#define IOP321_DMA0_NDAR  (volatile u32 *)IOP321_REG_ADDR(0x00000410)
+#define IOP321_DMA0_PADR  (volatile u32 *)IOP321_REG_ADDR(0x00000414)
+#define IOP321_DMA0_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000418)
+#define IOP321_DMA0_LADR  (volatile u32 *)IOP321_REG_ADDR(0X0000041C)
+#define IOP321_DMA0_BCR   (volatile u32 *)IOP321_REG_ADDR(0x00000420)
+#define IOP321_DMA0_DCR   (volatile u32 *)IOP321_REG_ADDR(0x00000424)
+/* Reserved 0x00000428 through 0x0000043C */
+#define IOP321_DMA1_CCR   (volatile u32 *)IOP321_REG_ADDR(0x00000440)
+#define IOP321_DMA1_CSR   (volatile u32 *)IOP321_REG_ADDR(0x00000444)
+#define IOP321_DMA1_DAR   (volatile u32 *)IOP321_REG_ADDR(0x0000044C)
+#define IOP321_DMA1_NDAR  (volatile u32 *)IOP321_REG_ADDR(0x00000450)
+#define IOP321_DMA1_PADR  (volatile u32 *)IOP321_REG_ADDR(0x00000454)
+#define IOP321_DMA1_PUADR (volatile u32 *)IOP321_REG_ADDR(0x00000458)
+#define IOP321_DMA1_LADR  (volatile u32 *)IOP321_REG_ADDR(0x0000045C)
+#define IOP321_DMA1_BCR   (volatile u32 *)IOP321_REG_ADDR(0x00000460)
+#define IOP321_DMA1_DCR   (volatile u32 *)IOP321_REG_ADDR(0x00000464)
+/* Reserved 0x00000468 through 0x000004FF */
+
+/* Memory controller 0x00000500 through 0x0005FF */
+
+/* Peripheral bus interface unit 0x00000680 through 0x0006FF */
+#define IOP321_PBCR       (volatile u32 *)IOP321_REG_ADDR(0x00000680)
+#define IOP321_PBISR      (volatile u32 *)IOP321_REG_ADDR(0x00000684)
+#define IOP321_PBBAR0     (volatile u32 *)IOP321_REG_ADDR(0x00000688)
+#define IOP321_PBLR0      (volatile u32 *)IOP321_REG_ADDR(0x0000068C)
+#define IOP321_PBBAR1     (volatile u32 *)IOP321_REG_ADDR(0x00000690)
+#define IOP321_PBLR1      (volatile u32 *)IOP321_REG_ADDR(0x00000694)
+#define IOP321_PBBAR2     (volatile u32 *)IOP321_REG_ADDR(0x00000698)
+#define IOP321_PBLR2      (volatile u32 *)IOP321_REG_ADDR(0x0000069C)
+#define IOP321_PBBAR3     (volatile u32 *)IOP321_REG_ADDR(0x000006A0)
+#define IOP321_PBLR3      (volatile u32 *)IOP321_REG_ADDR(0x000006A4)
+#define IOP321_PBBAR4     (volatile u32 *)IOP321_REG_ADDR(0x000006A8)
+#define IOP321_PBLR4      (volatile u32 *)IOP321_REG_ADDR(0x000006AC)
+#define IOP321_PBBAR5     (volatile u32 *)IOP321_REG_ADDR(0x000006B0)
+#define IOP321_PBLR5      (volatile u32 *)IOP321_REG_ADDR(0x000006B4)
+#define IOP321_PBDSCR     (volatile u32 *)IOP321_REG_ADDR(0x000006B8)
+/* Reserved 0x000006BC */
+#define IOP321_PMBR0      (volatile u32 *)IOP321_REG_ADDR(0x000006C0)
+/* Reserved 0x000006C4 through 0x000006DC */
+#define IOP321_PMBR1      (volatile u32 *)IOP321_REG_ADDR(0x000006E0)
+#define IOP321_PMBR2      (volatile u32 *)IOP321_REG_ADDR(0x000006E4)
+
+#define IOP321_PBCR_EN    0x1
+
+#define IOP321_PBISR_BOOR_ERR 0x1
+
+/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */
+#define IOP321_GTMR	(volatile u32 *)IOP321_REG_ADDR(0x00000700)
+#define IOP321_ESR	(volatile u32 *)IOP321_REG_ADDR(0x00000704)
+#define IOP321_EMISR	(volatile u32 *)IOP321_REG_ADDR(0x00000708)
+/* reserved 0x00000070c */
+#define IOP321_GTSR	(volatile u32 *)IOP321_REG_ADDR(0x00000710)
+/* PERC0 DOESN'T EXIST - index from 1! */
+#define IOP321_PERCR0	(volatile u32 *)IOP321_REG_ADDR(0x00000710)
+
+#define IOP321_GTMR_NGCE	0x04 /* (Not) Global Counter Enable */
+
+/* Internal arbitration unit 0x00000780 through 0x0007BF */
+#define IOP321_IACR	(volatile u32 *)IOP321_REG_ADDR(0x00000780)
+#define IOP321_MTTR1	(volatile u32 *)IOP321_REG_ADDR(0x00000784)
+#define IOP321_MTTR2	(volatile u32 *)IOP321_REG_ADDR(0x00000788)
+
+/* General Purpose I/O Registers */
+#define IOP321_GPOE       (volatile u32 *)IOP321_REG_ADDR(0x000007C4)
+#define IOP321_GPID       (volatile u32 *)IOP321_REG_ADDR(0x000007C8)
+#define IOP321_GPOD       (volatile u32 *)IOP321_REG_ADDR(0x000007CC)
+
+/* Interrupt Controller */
+#define IOP321_INTCTL     (volatile u32 *)IOP321_REG_ADDR(0x000007D0)
+#define IOP321_INTSTR     (volatile u32 *)IOP321_REG_ADDR(0x000007D4)
+#define IOP321_IINTSRC    (volatile u32 *)IOP321_REG_ADDR(0x000007D8)
+#define IOP321_FINTSRC    (volatile u32 *)IOP321_REG_ADDR(0x000007DC)
+
+/* Timers */
+
+#define IOP321_TU_TMR0		(volatile u32 *)IOP321_REG_ADDR(0x000007E0)
+#define IOP321_TU_TMR1		(volatile u32 *)IOP321_REG_ADDR(0x000007E4)
+
+#ifdef CONFIG_ARCH_IQ80321
+#define	IOP321_TICK_RATE	200000000	/* 200 MHz clock */
+#elif defined(CONFIG_ARCH_IQ31244)
+#define IOP321_TICK_RATE	198000000	/* 33.000 MHz crystal */
+#endif
+
+#ifdef CONFIG_ARCH_EP80219
+#undef IOP321_TICK_RATE
+#define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */
+#endif
+
+#define IOP321_TMR_TC		0x01
+#define	IOP321_TMR_EN		0x02
+#define IOP321_TMR_RELOAD	0x04
+#define	IOP321_TMR_PRIVILEGED	0x09
+
+#define	IOP321_TMR_RATIO_1_1	0x00
+#define	IOP321_TMR_RATIO_4_1	0x10
+#define	IOP321_TMR_RATIO_8_1	0x20
+#define	IOP321_TMR_RATIO_16_1	0x30
+
+#define IOP321_TU_TCR0    (volatile u32 *)IOP321_REG_ADDR(0x000007E8)
+#define IOP321_TU_TCR1    (volatile u32 *)IOP321_REG_ADDR(0x000007EC)
+#define IOP321_TU_TRR0    (volatile u32 *)IOP321_REG_ADDR(0x000007F0)
+#define IOP321_TU_TRR1    (volatile u32 *)IOP321_REG_ADDR(0x000007F4)
+#define IOP321_TU_TISR    (volatile u32 *)IOP321_REG_ADDR(0x000007F8)
+#define IOP321_TU_WDTCR   (volatile u32 *)IOP321_REG_ADDR(0x000007FC)
+
+/* Application accelerator unit 0x00000800 - 0x000008FF */
+#define IOP321_AAU_ACR     (volatile u32 *)IOP321_REG_ADDR(0x00000800)
+#define IOP321_AAU_ASR     (volatile u32 *)IOP321_REG_ADDR(0x00000804)
+#define IOP321_AAU_ADAR    (volatile u32 *)IOP321_REG_ADDR(0x00000808)
+#define IOP321_AAU_ANDAR   (volatile u32 *)IOP321_REG_ADDR(0x0000080C)
+#define IOP321_AAU_SAR1    (volatile u32 *)IOP321_REG_ADDR(0x00000810)
+#define IOP321_AAU_SAR2    (volatile u32 *)IOP321_REG_ADDR(0x00000814)
+#define IOP321_AAU_SAR3    (volatile u32 *)IOP321_REG_ADDR(0x00000818)
+#define IOP321_AAU_SAR4    (volatile u32 *)IOP321_REG_ADDR(0x0000081C)
+#define IOP321_AAU_SAR5    (volatile u32 *)IOP321_REG_ADDR(0x0000082C)
+#define IOP321_AAU_SAR6    (volatile u32 *)IOP321_REG_ADDR(0x00000830)
+#define IOP321_AAU_SAR7    (volatile u32 *)IOP321_REG_ADDR(0x00000834)
+#define IOP321_AAU_SAR8    (volatile u32 *)IOP321_REG_ADDR(0x00000838)
+#define IOP321_AAU_SAR9    (volatile u32 *)IOP321_REG_ADDR(0x00000840)
+#define IOP321_AAU_SAR10   (volatile u32 *)IOP321_REG_ADDR(0x00000844)
+#define IOP321_AAU_SAR11   (volatile u32 *)IOP321_REG_ADDR(0x00000848)
+#define IOP321_AAU_SAR12   (volatile u32 *)IOP321_REG_ADDR(0x0000084C)
+#define IOP321_AAU_SAR13   (volatile u32 *)IOP321_REG_ADDR(0x00000850)
+#define IOP321_AAU_SAR14   (volatile u32 *)IOP321_REG_ADDR(0x00000854)
+#define IOP321_AAU_SAR15   (volatile u32 *)IOP321_REG_ADDR(0x00000858)
+#define IOP321_AAU_SAR16   (volatile u32 *)IOP321_REG_ADDR(0x0000085C)
+#define IOP321_AAU_SAR17   (volatile u32 *)IOP321_REG_ADDR(0x00000864)
+#define IOP321_AAU_SAR18   (volatile u32 *)IOP321_REG_ADDR(0x00000868)
+#define IOP321_AAU_SAR19   (volatile u32 *)IOP321_REG_ADDR(0x0000086C)
+#define IOP321_AAU_SAR20   (volatile u32 *)IOP321_REG_ADDR(0x00000870)
+#define IOP321_AAU_SAR21   (volatile u32 *)IOP321_REG_ADDR(0x00000874)
+#define IOP321_AAU_SAR22   (volatile u32 *)IOP321_REG_ADDR(0x00000878)
+#define IOP321_AAU_SAR23   (volatile u32 *)IOP321_REG_ADDR(0x0000087C)
+#define IOP321_AAU_SAR24   (volatile u32 *)IOP321_REG_ADDR(0x00000880)
+#define IOP321_AAU_SAR25   (volatile u32 *)IOP321_REG_ADDR(0x00000888)
+#define IOP321_AAU_SAR26   (volatile u32 *)IOP321_REG_ADDR(0x0000088C)
+#define IOP321_AAU_SAR27   (volatile u32 *)IOP321_REG_ADDR(0x00000890)
+#define IOP321_AAU_SAR28   (volatile u32 *)IOP321_REG_ADDR(0x00000894)
+#define IOP321_AAU_SAR29   (volatile u32 *)IOP321_REG_ADDR(0x00000898)
+#define IOP321_AAU_SAR30   (volatile u32 *)IOP321_REG_ADDR(0x0000089C)
+#define IOP321_AAU_SAR31   (volatile u32 *)IOP321_REG_ADDR(0x000008A0)
+#define IOP321_AAU_SAR32   (volatile u32 *)IOP321_REG_ADDR(0x000008A4)
+#define IOP321_AAU_DAR     (volatile u32 *)IOP321_REG_ADDR(0x00000820)
+#define IOP321_AAU_ABCR    (volatile u32 *)IOP321_REG_ADDR(0x00000824)
+#define IOP321_AAU_ADCR    (volatile u32 *)IOP321_REG_ADDR(0x00000828)
+#define IOP321_AAU_EDCR0   (volatile u32 *)IOP321_REG_ADDR(0x0000083c)
+#define IOP321_AAU_EDCR1   (volatile u32 *)IOP321_REG_ADDR(0x00000860)
+#define IOP321_AAU_EDCR2   (volatile u32 *)IOP321_REG_ADDR(0x00000884)
+
+
+/* SSP serial port unit 0x00001600 - 0x0000167F */
+/* I2C bus interface unit 0x00001680 - 0x000016FF */
+#define IOP321_ICR0       (volatile u32 *)IOP321_REG_ADDR(0x00001680)
+#define IOP321_ISR0       (volatile u32 *)IOP321_REG_ADDR(0x00001684)
+#define IOP321_ISAR0      (volatile u32 *)IOP321_REG_ADDR(0x00001688)
+#define IOP321_IDBR0      (volatile u32 *)IOP321_REG_ADDR(0x0000168C)
+/* Reserved 0x00001690 */
+#define IOP321_IBMR0      (volatile u32 *)IOP321_REG_ADDR(0x00001694)
+/* Reserved 0x00001698 */
+/* Reserved 0x0000169C */
+#define IOP321_ICR1       (volatile u32 *)IOP321_REG_ADDR(0x000016A0)
+#define IOP321_ISR1       (volatile u32 *)IOP321_REG_ADDR(0x000016A4)
+#define IOP321_ISAR1      (volatile u32 *)IOP321_REG_ADDR(0x000016A8)
+#define IOP321_IDBR1      (volatile u32 *)IOP321_REG_ADDR(0x000016AC)
+#define IOP321_IBMR1      (volatile u32 *)IOP321_REG_ADDR(0x000016B4)
+/* Reserved 0x000016B8 through 0x000016FC */
+
+/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */
+
+
+#ifndef __ASSEMBLY__
+extern void iop321_map_io(void);
+extern void iop321_init_irq(void);
+extern void iop321_time_init(void);
+#endif
+
+#endif // _IOP321_HW_H_
diff --git a/include/asm-arm/arch-iop3xx/iop331-irqs.h b/include/asm-arm/arch-iop3xx/iop331-irqs.h
new file mode 100644
index 000000000000..8ff73d487222
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iop331-irqs.h
@@ -0,0 +1,136 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _IOP331_IRQS_H_
+#define _IOP331_IRQS_H_
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IOP331_IRQ_OFS		0
+#define IOP331_IRQ(x)		(IOP331_IRQ_OFS + (x))
+
+/*
+ * On IRQ or FIQ register
+ */
+#define IRQ_IOP331_DMA0_EOT	IOP331_IRQ(0)
+#define IRQ_IOP331_DMA0_EOC	IOP331_IRQ(1)
+#define IRQ_IOP331_DMA1_EOT	IOP331_IRQ(2)
+#define IRQ_IOP331_DMA1_EOC	IOP331_IRQ(3)
+#define IRQ_IOP331_RSVD_4	IOP331_IRQ(4)
+#define IRQ_IOP331_RSVD_5	IOP331_IRQ(5)
+#define IRQ_IOP331_AA_EOT	IOP331_IRQ(6)
+#define IRQ_IOP331_AA_EOC	IOP331_IRQ(7)
+#define IRQ_IOP331_TIMER0	IOP331_IRQ(8)
+#define IRQ_IOP331_TIMER1	IOP331_IRQ(9)
+#define IRQ_IOP331_I2C_0	IOP331_IRQ(10)
+#define IRQ_IOP331_I2C_1	IOP331_IRQ(11)
+#define IRQ_IOP331_MSG	    IOP331_IRQ(12)
+#define IRQ_IOP331_MSGIBQ   IOP331_IRQ(13)
+#define IRQ_IOP331_ATU_BIST	IOP331_IRQ(14)
+#define IRQ_IOP331_PERFMON	IOP331_IRQ(15)
+#define IRQ_IOP331_CORE_PMU	IOP331_IRQ(16)
+#define IRQ_IOP331_RSVD_17	IOP331_IRQ(17)
+#define IRQ_IOP331_RSVD_18	IOP331_IRQ(18)
+#define IRQ_IOP331_RSVD_19	IOP331_IRQ(19)
+#define IRQ_IOP331_RSVD_20	IOP331_IRQ(20)
+#define IRQ_IOP331_RSVD_21	IOP331_IRQ(21)
+#define IRQ_IOP331_RSVD_22	IOP331_IRQ(22)
+#define IRQ_IOP331_RSVD_23	IOP331_IRQ(23)
+#define IRQ_IOP331_XINT0	IOP331_IRQ(24)
+#define IRQ_IOP331_XINT1	IOP331_IRQ(25)
+#define IRQ_IOP331_XINT2	IOP331_IRQ(26)
+#define IRQ_IOP331_XINT3	IOP331_IRQ(27)
+#define IRQ_IOP331_RSVD_28  IOP331_IRQ(28)
+#define IRQ_IOP331_RSVD_29  IOP331_IRQ(29)
+#define IRQ_IOP331_RSVD_30  IOP331_IRQ(30)
+#define IRQ_IOP331_RSVD_31  IOP331_IRQ(31)
+#define IRQ_IOP331_XINT8    IOP331_IRQ(32)  // 0
+#define IRQ_IOP331_XINT9    IOP331_IRQ(33)  // 1
+#define IRQ_IOP331_XINT10   IOP331_IRQ(34)  // 2
+#define IRQ_IOP331_XINT11   IOP331_IRQ(35)  // 3
+#define IRQ_IOP331_XINT12   IOP331_IRQ(36)  // 4
+#define IRQ_IOP331_XINT13   IOP331_IRQ(37)  // 5
+#define IRQ_IOP331_XINT14   IOP331_IRQ(38)  // 6
+#define IRQ_IOP331_XINT15   IOP331_IRQ(39)  // 7
+#define IRQ_IOP331_RSVD_40  IOP331_IRQ(40)  // 8
+#define IRQ_IOP331_RSVD_41  IOP331_IRQ(41)  // 9
+#define IRQ_IOP331_RSVD_42  IOP331_IRQ(42)  // 10
+#define IRQ_IOP331_RSVD_43  IOP331_IRQ(43)  // 11
+#define IRQ_IOP331_RSVD_44  IOP331_IRQ(44)  // 12
+#define IRQ_IOP331_RSVD_45  IOP331_IRQ(45)  // 13
+#define IRQ_IOP331_RSVD_46  IOP331_IRQ(46)  // 14
+#define IRQ_IOP331_RSVD_47  IOP331_IRQ(47)  // 15
+#define IRQ_IOP331_RSVD_48  IOP331_IRQ(48)  // 16
+#define IRQ_IOP331_RSVD_49  IOP331_IRQ(49)  // 17
+#define IRQ_IOP331_RSVD_50  IOP331_IRQ(50)  // 18
+#define IRQ_IOP331_UART0    IOP331_IRQ(51)  // 19
+#define IRQ_IOP331_UART1    IOP331_IRQ(52)  // 20
+#define IRQ_IOP331_PBIE     IOP331_IRQ(53)  // 21
+#define IRQ_IOP331_ATU_CRW  IOP331_IRQ(54)  // 22
+#define IRQ_IOP331_ATU_ERR	IOP331_IRQ(55)  // 23
+#define IRQ_IOP331_MCU_ERR	IOP331_IRQ(56)  // 24
+#define IRQ_IOP331_DMA0_ERR	IOP331_IRQ(57)  // 25
+#define IRQ_IOP331_DMA1_ERR	IOP331_IRQ(58)  // 26
+#define IRQ_IOP331_RSVD_59  IOP331_IRQ(59)  // 27
+#define IRQ_IOP331_AA_ERR	IOP331_IRQ(60)  // 28
+#define IRQ_IOP331_RSVD_61  IOP331_IRQ(61)  // 29
+#define IRQ_IOP331_MSG_ERR	IOP331_IRQ(62)  // 30
+#define IRQ_IOP331_HPI		IOP331_IRQ(63)  // 31
+
+#define NR_IOP331_IRQS		(IOP331_IRQ(63) + 1)
+
+#define NR_IRQS			NR_IOP331_IRQS
+
+
+#if defined(CONFIG_ARCH_IQ80331)
+/*
+ * Interrupts available on the IQ80331 board
+ */
+
+/*
+ * On board devices
+ */
+#define	IRQ_IQ80331_I82544	IRQ_IOP331_XINT0
+#define IRQ_IQ80331_UART0	IRQ_IOP331_UART0
+#define IRQ_IQ80331_UART1	IRQ_IOP331_UART1
+
+/*
+ * PCI interrupts
+ */
+#define	IRQ_IQ80331_INTA	IRQ_IOP331_XINT0
+#define	IRQ_IQ80331_INTB	IRQ_IOP331_XINT1
+#define	IRQ_IQ80331_INTC	IRQ_IOP331_XINT2
+#define	IRQ_IQ80331_INTD	IRQ_IOP331_XINT3
+
+#elif defined(CONFIG_MACH_IQ80332)
+/*
+ * Interrupts available on the IQ80332 board
+ */
+
+/*
+ * On board devices
+ */
+#define	IRQ_IQ80332_I82544	IRQ_IOP331_XINT0
+#define IRQ_IQ80332_UART0	IRQ_IOP331_UART0
+#define IRQ_IQ80332_UART1	IRQ_IOP331_UART1
+
+/*
+ * PCI interrupts
+ */
+#define	IRQ_IQ80332_INTA	IRQ_IOP331_XINT0
+#define	IRQ_IQ80332_INTB	IRQ_IOP331_XINT1
+#define	IRQ_IQ80332_INTC	IRQ_IOP331_XINT2
+#define	IRQ_IQ80332_INTD	IRQ_IOP331_XINT3
+
+#endif
+
+#endif // _IOP331_IRQ_H_
diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h
new file mode 100644
index 000000000000..96adffd8bad2
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iop331.h
@@ -0,0 +1,363 @@
+/*
+ * linux/include/asm/arch-iop3xx/iop331.h
+ *
+ * Intel IOP331 Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IOP331_HW_H_
+#define _IOP331_HW_H_
+
+
+/*
+ * This is needed for mixed drivers that need to work on all
+ * IOP3xx variants but behave slightly differently on each.
+ */
+#ifndef __ASSEMBLY__
+#ifdef	CONFIG_ARCH_IOP331
+/*#define	iop_is_331()	((processor_id & 0xffffffb0) == 0x69054090) */
+#define	iop_is_331()	((processor_id & 0xffffff30) == 0x69054010)
+#else
+#define	iop_is_331()	0
+#endif
+#endif
+
+/*
+ * IOP331 I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP331_PCI_IO_WINDOW_SIZE   0x00010000
+#define IOP331_PCI_LOWER_IO_PA      0x90000000
+#define IOP331_PCI_LOWER_IO_VA      0xfe000000
+#define IOP331_PCI_LOWER_IO_BA      (*IOP331_OIOWTVR)
+#define IOP331_PCI_UPPER_IO_PA      (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1)
+#define IOP331_PCI_UPPER_IO_VA      (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1)
+#define IOP331_PCI_UPPER_IO_BA      (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1)
+#define IOP331_PCI_IO_OFFSET        (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA)
+
+/* this can be 128M if OMWTVR1 is set */
+#define IOP331_PCI_MEM_WINDOW_SIZE	0x04000000 /* 64M outbound window */
+//#define IOP331_PCI_MEM_WINDOW_SIZE  (~*IOP331_IALR1 + 1)
+#define IOP331_PCI_LOWER_MEM_PA     0x80000000
+#define IOP331_PCI_LOWER_MEM_BA     (*IOP331_OMWTVR0)
+#define IOP331_PCI_UPPER_MEM_PA     (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1)
+#define IOP331_PCI_UPPER_MEM_BA     (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1)
+#define IOP331_PCI_MEM_OFFSET       (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA)
+
+/*
+ * IOP331 chipset registers
+ */
+#define IOP331_VIRT_MEM_BASE  0xfeffe000  /* chip virtual mem address*/
+#define IOP331_PHYS_MEM_BASE  0xffffe000  /* chip physical memory address */
+#define IOP331_REG_ADDR(reg) (IOP331_VIRT_MEM_BASE | (reg))
+
+/* Reserved 0x00000000 through 0x000000FF */
+
+/* Address Translation Unit 0x00000100 through 0x000001FF */
+#define IOP331_ATUVID     (volatile u16 *)IOP331_REG_ADDR(0x00000100)
+#define IOP331_ATUDID     (volatile u16 *)IOP331_REG_ADDR(0x00000102)
+#define IOP331_ATUCMD     (volatile u16 *)IOP331_REG_ADDR(0x00000104)
+#define IOP331_ATUSR      (volatile u16 *)IOP331_REG_ADDR(0x00000106)
+#define IOP331_ATURID     (volatile u8  *)IOP331_REG_ADDR(0x00000108)
+#define IOP331_ATUCCR     (volatile u32 *)IOP331_REG_ADDR(0x00000109)
+#define IOP331_ATUCLSR    (volatile u8  *)IOP331_REG_ADDR(0x0000010C)
+#define IOP331_ATULT      (volatile u8  *)IOP331_REG_ADDR(0x0000010D)
+#define IOP331_ATUHTR     (volatile u8  *)IOP331_REG_ADDR(0x0000010E)
+#define IOP331_ATUBIST    (volatile u8  *)IOP331_REG_ADDR(0x0000010F)
+#define IOP331_IABAR0     (volatile u32 *)IOP331_REG_ADDR(0x00000110)
+#define IOP331_IAUBAR0    (volatile u32 *)IOP331_REG_ADDR(0x00000114)
+#define IOP331_IABAR1     (volatile u32 *)IOP331_REG_ADDR(0x00000118)
+#define IOP331_IAUBAR1    (volatile u32 *)IOP331_REG_ADDR(0x0000011C)
+#define IOP331_IABAR2     (volatile u32 *)IOP331_REG_ADDR(0x00000120)
+#define IOP331_IAUBAR2    (volatile u32 *)IOP331_REG_ADDR(0x00000124)
+#define IOP331_ASVIR      (volatile u16 *)IOP331_REG_ADDR(0x0000012C)
+#define IOP331_ASIR       (volatile u16 *)IOP331_REG_ADDR(0x0000012E)
+#define IOP331_ERBAR      (volatile u32 *)IOP331_REG_ADDR(0x00000130)
+#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134)
+/* Reserved 0x00000138 through 0x0000013B */
+#define IOP331_ATUILR     (volatile u8  *)IOP331_REG_ADDR(0x0000013C)
+#define IOP331_ATUIPR     (volatile u8  *)IOP331_REG_ADDR(0x0000013D)
+#define IOP331_ATUMGNT    (volatile u8  *)IOP331_REG_ADDR(0x0000013E)
+#define IOP331_ATUMLAT    (volatile u8  *)IOP331_REG_ADDR(0x0000013F)
+#define IOP331_IALR0      (volatile u32 *)IOP331_REG_ADDR(0x00000140)
+#define IOP331_IATVR0     (volatile u32 *)IOP331_REG_ADDR(0x00000144)
+#define IOP331_ERLR       (volatile u32 *)IOP331_REG_ADDR(0x00000148)
+#define IOP331_ERTVR      (volatile u32 *)IOP331_REG_ADDR(0x0000014C)
+#define IOP331_IALR1      (volatile u32 *)IOP331_REG_ADDR(0x00000150)
+#define IOP331_IALR2      (volatile u32 *)IOP331_REG_ADDR(0x00000154)
+#define IOP331_IATVR2     (volatile u32 *)IOP331_REG_ADDR(0x00000158)
+#define IOP331_OIOWTVR    (volatile u32 *)IOP331_REG_ADDR(0x0000015C)
+#define IOP331_OMWTVR0    (volatile u32 *)IOP331_REG_ADDR(0x00000160)
+#define IOP331_OUMWTVR0   (volatile u32 *)IOP331_REG_ADDR(0x00000164)
+#define IOP331_OMWTVR1    (volatile u32 *)IOP331_REG_ADDR(0x00000168)
+#define IOP331_OUMWTVR1   (volatile u32 *)IOP331_REG_ADDR(0x0000016C)
+/* Reserved 0x00000170 through 0x00000177*/
+#define IOP331_OUDWTVR    (volatile u32 *)IOP331_REG_ADDR(0x00000178)
+/* Reserved 0x0000017C through 0x0000017F*/
+#define IOP331_ATUCR      (volatile u32 *)IOP331_REG_ADDR(0x00000180)
+#define IOP331_PCSR       (volatile u32 *)IOP331_REG_ADDR(0x00000184)
+#define IOP331_ATUISR     (volatile u32 *)IOP331_REG_ADDR(0x00000188)
+#define IOP331_ATUIMR     (volatile u32 *)IOP331_REG_ADDR(0x0000018C)
+#define IOP331_IABAR3     (volatile u32 *)IOP331_REG_ADDR(0x00000190)
+#define IOP331_IAUBAR3    (volatile u32 *)IOP331_REG_ADDR(0x00000194)
+#define IOP331_IALR3      (volatile u32 *)IOP331_REG_ADDR(0x00000198)
+#define IOP331_IATVR3     (volatile u32 *)IOP331_REG_ADDR(0x0000019C)
+/* Reserved 0x000001A0 through 0x000001A3*/
+#define IOP331_OCCAR      (volatile u32 *)IOP331_REG_ADDR(0x000001A4)
+/* Reserved 0x000001A8 through 0x000001AB*/
+#define IOP331_OCCDR      (volatile u32 *)IOP331_REG_ADDR(0x000001AC)
+/* Reserved 0x000001B0 through 0x000001BB*/
+#define IOP331_VPDCAPID   (volatile u8 *)IOP331_REG_ADDR(0x000001B8)
+#define IOP331_VPDNXTP    (volatile u8 *)IOP331_REG_ADDR(0x000001B9)
+#define IOP331_VPDAR	  (volatile u16 *)IOP331_REG_ADDR(0x000001BA)
+#define IOP331_VPDDR      (volatile u32 *)IOP331_REG_ADDR(0x000001BC)
+#define IOP331_PMCAPID    (volatile u8 *)IOP331_REG_ADDR(0x000001C0)
+#define IOP331_PMNEXT     (volatile u8 *)IOP331_REG_ADDR(0x000001C1)
+#define IOP331_APMCR      (volatile u16 *)IOP331_REG_ADDR(0x000001C2)
+#define IOP331_APMCSR     (volatile u16 *)IOP331_REG_ADDR(0x000001C4)
+/* Reserved 0x000001C6 through 0x000001CF */
+#define IOP331_MSICAPID   (volatile u8 *)IOP331_REG_ADDR(0x000001D0)
+#define IOP331_MSINXTP	  (volatile u8 *)IOP331_REG_ADDR(0x000001D1)
+#define IOP331_MSIMCR     (volatile u16 *)IOP331_REG_ADDR(0x000001D2)
+#define IOP331_MSIMAR     (volatile u32 *)IOP331_REG_ADDR(0x000001D4)
+#define IOP331_MSIMUAR	  (volatile u32 *)IOP331_REG_ADDR(0x000001D8)
+#define IOP331_MSIMDR	  (volatile u32 *)IOP331_REG_ADDR(0x000001DC)
+#define IOP331_PCIXCAPID  (volatile u8 *)IOP331_REG_ADDR(0x000001E0)
+#define IOP331_PCIXNEXT   (volatile u8 *)IOP331_REG_ADDR(0x000001E1)
+#define IOP331_PCIXCMD    (volatile u16 *)IOP331_REG_ADDR(0x000001E2)
+#define IOP331_PCIXSR     (volatile u32 *)IOP331_REG_ADDR(0x000001E4)
+#define IOP331_PCIIRSR    (volatile u32 *)IOP331_REG_ADDR(0x000001EC)
+
+/* Messaging Unit 0x00000300 through 0x000003FF */
+
+/* Reserved 0x00000300 through 0x0000030c */
+#define IOP331_IMR0       (volatile u32 *)IOP331_REG_ADDR(0x00000310)
+#define IOP331_IMR1       (volatile u32 *)IOP331_REG_ADDR(0x00000314)
+#define IOP331_OMR0       (volatile u32 *)IOP331_REG_ADDR(0x00000318)
+#define IOP331_OMR1       (volatile u32 *)IOP331_REG_ADDR(0x0000031C)
+#define IOP331_IDR        (volatile u32 *)IOP331_REG_ADDR(0x00000320)
+#define IOP331_IISR       (volatile u32 *)IOP331_REG_ADDR(0x00000324)
+#define IOP331_IIMR       (volatile u32 *)IOP331_REG_ADDR(0x00000328)
+#define IOP331_ODR        (volatile u32 *)IOP331_REG_ADDR(0x0000032C)
+#define IOP331_OISR       (volatile u32 *)IOP331_REG_ADDR(0x00000330)
+#define IOP331_OIMR       (volatile u32 *)IOP331_REG_ADDR(0x00000334)
+/* Reserved 0x00000338 through 0x0000034F */
+#define IOP331_MUCR       (volatile u32 *)IOP331_REG_ADDR(0x00000350)
+#define IOP331_QBAR       (volatile u32 *)IOP331_REG_ADDR(0x00000354)
+/* Reserved 0x00000358 through 0x0000035C */
+#define IOP331_IFHPR      (volatile u32 *)IOP331_REG_ADDR(0x00000360)
+#define IOP331_IFTPR      (volatile u32 *)IOP331_REG_ADDR(0x00000364)
+#define IOP331_IPHPR      (volatile u32 *)IOP331_REG_ADDR(0x00000368)
+#define IOP331_IPTPR      (volatile u32 *)IOP331_REG_ADDR(0x0000036C)
+#define IOP331_OFHPR      (volatile u32 *)IOP331_REG_ADDR(0x00000370)
+#define IOP331_OFTPR      (volatile u32 *)IOP331_REG_ADDR(0x00000374)
+#define IOP331_OPHPR      (volatile u32 *)IOP331_REG_ADDR(0x00000378)
+#define IOP331_OPTPR      (volatile u32 *)IOP331_REG_ADDR(0x0000037C)
+#define IOP331_IAR        (volatile u32 *)IOP331_REG_ADDR(0x00000380)
+/* Reserved 0x00000384 through 0x000003FF */
+
+/* DMA Controller 0x00000400 through 0x000004FF */
+#define IOP331_DMA0_CCR   (volatile u32 *)IOP331_REG_ADDR(0x00000400)
+#define IOP331_DMA0_CSR   (volatile u32 *)IOP331_REG_ADDR(0x00000404)
+#define IOP331_DMA0_DAR   (volatile u32 *)IOP331_REG_ADDR(0x0000040C)
+#define IOP331_DMA0_NDAR  (volatile u32 *)IOP331_REG_ADDR(0x00000410)
+#define IOP331_DMA0_PADR  (volatile u32 *)IOP331_REG_ADDR(0x00000414)
+#define IOP331_DMA0_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000418)
+#define IOP331_DMA0_LADR  (volatile u32 *)IOP331_REG_ADDR(0X0000041C)
+#define IOP331_DMA0_BCR   (volatile u32 *)IOP331_REG_ADDR(0x00000420)
+#define IOP331_DMA0_DCR   (volatile u32 *)IOP331_REG_ADDR(0x00000424)
+/* Reserved 0x00000428 through 0x0000043C */
+#define IOP331_DMA1_CCR   (volatile u32 *)IOP331_REG_ADDR(0x00000440)
+#define IOP331_DMA1_CSR   (volatile u32 *)IOP331_REG_ADDR(0x00000444)
+#define IOP331_DMA1_DAR   (volatile u32 *)IOP331_REG_ADDR(0x0000044C)
+#define IOP331_DMA1_NDAR  (volatile u32 *)IOP331_REG_ADDR(0x00000450)
+#define IOP331_DMA1_PADR  (volatile u32 *)IOP331_REG_ADDR(0x00000454)
+#define IOP331_DMA1_PUADR (volatile u32 *)IOP331_REG_ADDR(0x00000458)
+#define IOP331_DMA1_LADR  (volatile u32 *)IOP331_REG_ADDR(0x0000045C)
+#define IOP331_DMA1_BCR   (volatile u32 *)IOP331_REG_ADDR(0x00000460)
+#define IOP331_DMA1_DCR   (volatile u32 *)IOP331_REG_ADDR(0x00000464)
+/* Reserved 0x00000468 through 0x000004FF */
+
+/* Memory controller 0x00000500 through 0x0005FF */
+
+/* Peripheral bus interface unit 0x00000680 through 0x0006FF */
+#define IOP331_PBCR       (volatile u32 *)IOP331_REG_ADDR(0x00000680)
+#define IOP331_PBISR      (volatile u32 *)IOP331_REG_ADDR(0x00000684)
+#define IOP331_PBBAR0     (volatile u32 *)IOP331_REG_ADDR(0x00000688)
+#define IOP331_PBLR0      (volatile u32 *)IOP331_REG_ADDR(0x0000068C)
+#define IOP331_PBBAR1     (volatile u32 *)IOP331_REG_ADDR(0x00000690)
+#define IOP331_PBLR1      (volatile u32 *)IOP331_REG_ADDR(0x00000694)
+#define IOP331_PBBAR2     (volatile u32 *)IOP331_REG_ADDR(0x00000698)
+#define IOP331_PBLR2      (volatile u32 *)IOP331_REG_ADDR(0x0000069C)
+#define IOP331_PBBAR3     (volatile u32 *)IOP331_REG_ADDR(0x000006A0)
+#define IOP331_PBLR3      (volatile u32 *)IOP331_REG_ADDR(0x000006A4)
+#define IOP331_PBBAR4     (volatile u32 *)IOP331_REG_ADDR(0x000006A8)
+#define IOP331_PBLR4      (volatile u32 *)IOP331_REG_ADDR(0x000006AC)
+#define IOP331_PBBAR5     (volatile u32 *)IOP331_REG_ADDR(0x000006B0)
+#define IOP331_PBLR5      (volatile u32 *)IOP331_REG_ADDR(0x000006B4)
+#define IOP331_PBDSCR     (volatile u32 *)IOP331_REG_ADDR(0x000006B8)
+/* Reserved 0x000006BC */
+#define IOP331_PMBR0      (volatile u32 *)IOP331_REG_ADDR(0x000006C0)
+/* Reserved 0x000006C4 through 0x000006DC */
+#define IOP331_PMBR1      (volatile u32 *)IOP331_REG_ADDR(0x000006E0)
+#define IOP331_PMBR2      (volatile u32 *)IOP331_REG_ADDR(0x000006E4)
+
+#define IOP331_PBCR_EN    0x1
+
+#define IOP331_PBISR_BOOR_ERR 0x1
+
+
+
+/* Peripheral performance monitoring unit 0x00000700 through 0x00077F */
+/* Internal arbitration unit 0x00000780 through 0x0007BF */
+
+/* Interrupt Controller */
+#define IOP331_INTCTL0    (volatile u32 *)IOP331_REG_ADDR(0x00000790)
+#define IOP331_INTCTL1    (volatile u32 *)IOP331_REG_ADDR(0x00000794)
+#define IOP331_INTSTR0    (volatile u32 *)IOP331_REG_ADDR(0x00000798)
+#define IOP331_INTSTR1    (volatile u32 *)IOP331_REG_ADDR(0x0000079C)
+#define IOP331_IINTSRC0   (volatile u32 *)IOP331_REG_ADDR(0x000007A0)
+#define IOP331_IINTSRC1   (volatile u32 *)IOP331_REG_ADDR(0x000007A4)
+#define IOP331_FINTSRC0   (volatile u32 *)IOP331_REG_ADDR(0x000007A8)
+#define IOP331_FINTSRC1   (volatile u32 *)IOP331_REG_ADDR(0x000007AC)
+#define IOP331_IPR0       (volatile u32 *)IOP331_REG_ADDR(0x000007B0)
+#define IOP331_IPR1       (volatile u32 *)IOP331_REG_ADDR(0x000007B4)
+#define IOP331_IPR2       (volatile u32 *)IOP331_REG_ADDR(0x000007B8)
+#define IOP331_IPR3       (volatile u32 *)IOP331_REG_ADDR(0x000007BC)
+#define IOP331_INTBASE    (volatile u32 *)IOP331_REG_ADDR(0x000007C0)
+#define IOP331_INTSIZE    (volatile u32 *)IOP331_REG_ADDR(0x000007C4)
+#define IOP331_IINTVEC    (volatile u32 *)IOP331_REG_ADDR(0x000007C8)
+#define IOP331_FINTVEC    (volatile u32 *)IOP331_REG_ADDR(0x000007CC)
+
+
+/* Timers */
+
+#define IOP331_TU_TMR0		(volatile u32 *)IOP331_REG_ADDR(0x000007D0)
+#define IOP331_TU_TMR1		(volatile u32 *)IOP331_REG_ADDR(0x000007D4)
+
+#define IOP331_TMR_TC		0x01
+#define	IOP331_TMR_EN		0x02
+#define IOP331_TMR_RELOAD	0x04
+#define	IOP331_TMR_PRIVILEGED	0x09
+
+#define	IOP331_TMR_RATIO_1_1	0x00
+#define	IOP331_TMR_RATIO_4_1	0x10
+#define	IOP331_TMR_RATIO_8_1	0x20
+#define	IOP331_TMR_RATIO_16_1	0x30
+
+#define IOP331_TU_TCR0    (volatile u32 *)IOP331_REG_ADDR(0x000007D8)
+#define IOP331_TU_TCR1    (volatile u32 *)IOP331_REG_ADDR(0x000007DC)
+#define IOP331_TU_TRR0    (volatile u32 *)IOP331_REG_ADDR(0x000007E0)
+#define IOP331_TU_TRR1    (volatile u32 *)IOP331_REG_ADDR(0x000007E4)
+#define IOP331_TU_TISR    (volatile u32 *)IOP331_REG_ADDR(0x000007E8)
+#define IOP331_TU_WDTCR   (volatile u32 *)IOP331_REG_ADDR(0x000007EC)
+
+#if defined(CONFIG_ARCH_IOP331)
+#define	IOP331_TICK_RATE	266000000	/* 266 MHz IB clock */
+#endif
+
+#if defined(CONFIG_IOP331_STEPD) || defined(CONFIG_ARCH_IQ80333)
+#undef IOP331_TICK_RATE
+#define IOP331_TICK_RATE	333000000	/* 333 Mhz IB clock */
+#endif
+
+/* Application accelerator unit 0x00000800 - 0x000008FF */
+#define IOP331_AAU_ACR     (volatile u32 *)IOP331_REG_ADDR(0x00000800)
+#define IOP331_AAU_ASR     (volatile u32 *)IOP331_REG_ADDR(0x00000804)
+#define IOP331_AAU_ADAR    (volatile u32 *)IOP331_REG_ADDR(0x00000808)
+#define IOP331_AAU_ANDAR   (volatile u32 *)IOP331_REG_ADDR(0x0000080C)
+#define IOP331_AAU_SAR1    (volatile u32 *)IOP331_REG_ADDR(0x00000810)
+#define IOP331_AAU_SAR2    (volatile u32 *)IOP331_REG_ADDR(0x00000814)
+#define IOP331_AAU_SAR3    (volatile u32 *)IOP331_REG_ADDR(0x00000818)
+#define IOP331_AAU_SAR4    (volatile u32 *)IOP331_REG_ADDR(0x0000081C)
+#define IOP331_AAU_SAR5    (volatile u32 *)IOP331_REG_ADDR(0x0000082C)
+#define IOP331_AAU_SAR6    (volatile u32 *)IOP331_REG_ADDR(0x00000830)
+#define IOP331_AAU_SAR7    (volatile u32 *)IOP331_REG_ADDR(0x00000834)
+#define IOP331_AAU_SAR8    (volatile u32 *)IOP331_REG_ADDR(0x00000838)
+#define IOP331_AAU_SAR9    (volatile u32 *)IOP331_REG_ADDR(0x00000840)
+#define IOP331_AAU_SAR10   (volatile u32 *)IOP331_REG_ADDR(0x00000844)
+#define IOP331_AAU_SAR11   (volatile u32 *)IOP331_REG_ADDR(0x00000848)
+#define IOP331_AAU_SAR12   (volatile u32 *)IOP331_REG_ADDR(0x0000084C)
+#define IOP331_AAU_SAR13   (volatile u32 *)IOP331_REG_ADDR(0x00000850)
+#define IOP331_AAU_SAR14   (volatile u32 *)IOP331_REG_ADDR(0x00000854)
+#define IOP331_AAU_SAR15   (volatile u32 *)IOP331_REG_ADDR(0x00000858)
+#define IOP331_AAU_SAR16   (volatile u32 *)IOP331_REG_ADDR(0x0000085C)
+#define IOP331_AAU_SAR17   (volatile u32 *)IOP331_REG_ADDR(0x00000864)
+#define IOP331_AAU_SAR18   (volatile u32 *)IOP331_REG_ADDR(0x00000868)
+#define IOP331_AAU_SAR19   (volatile u32 *)IOP331_REG_ADDR(0x0000086C)
+#define IOP331_AAU_SAR20   (volatile u32 *)IOP331_REG_ADDR(0x00000870)
+#define IOP331_AAU_SAR21   (volatile u32 *)IOP331_REG_ADDR(0x00000874)
+#define IOP331_AAU_SAR22   (volatile u32 *)IOP331_REG_ADDR(0x00000878)
+#define IOP331_AAU_SAR23   (volatile u32 *)IOP331_REG_ADDR(0x0000087C)
+#define IOP331_AAU_SAR24   (volatile u32 *)IOP331_REG_ADDR(0x00000880)
+#define IOP331_AAU_SAR25   (volatile u32 *)IOP331_REG_ADDR(0x00000888)
+#define IOP331_AAU_SAR26   (volatile u32 *)IOP331_REG_ADDR(0x0000088C)
+#define IOP331_AAU_SAR27   (volatile u32 *)IOP331_REG_ADDR(0x00000890)
+#define IOP331_AAU_SAR28   (volatile u32 *)IOP331_REG_ADDR(0x00000894)
+#define IOP331_AAU_SAR29   (volatile u32 *)IOP331_REG_ADDR(0x00000898)
+#define IOP331_AAU_SAR30   (volatile u32 *)IOP331_REG_ADDR(0x0000089C)
+#define IOP331_AAU_SAR31   (volatile u32 *)IOP331_REG_ADDR(0x000008A0)
+#define IOP331_AAU_SAR32   (volatile u32 *)IOP331_REG_ADDR(0x000008A4)
+#define IOP331_AAU_DAR     (volatile u32 *)IOP331_REG_ADDR(0x00000820)
+#define IOP331_AAU_ABCR    (volatile u32 *)IOP331_REG_ADDR(0x00000824)
+#define IOP331_AAU_ADCR    (volatile u32 *)IOP331_REG_ADDR(0x00000828)
+#define IOP331_AAU_EDCR0   (volatile u32 *)IOP331_REG_ADDR(0x0000083c)
+#define IOP331_AAU_EDCR1   (volatile u32 *)IOP331_REG_ADDR(0x00000860)
+#define IOP331_AAU_EDCR2   (volatile u32 *)IOP331_REG_ADDR(0x00000884)
+
+
+#define IOP331_SPDSCR	  (volatile u32 *)IOP331_REG_ADDR(0x000015C0)
+#define IOP331_PPDSCR	  (volatile u32 *)IOP331_REG_ADDR(0x000015C8)
+/* SSP serial port unit 0x00001600 - 0x0000167F */
+
+/* I2C bus interface unit 0x00001680 - 0x000016FF */
+/* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */
+
+#define IOP331_ICR0       (volatile u32 *)IOP331_REG_ADDR(0x00001680)
+#define IOP331_ISR0       (volatile u32 *)IOP331_REG_ADDR(0x00001684)
+#define IOP331_ISAR0      (volatile u32 *)IOP331_REG_ADDR(0x00001688)
+#define IOP331_IDBR0      (volatile u32 *)IOP331_REG_ADDR(0x0000168C)
+/* Reserved 0x00001690 */
+#define IOP331_IBMR0      (volatile u32 *)IOP331_REG_ADDR(0x00001694)
+/* Reserved 0x00001698 */
+/* Reserved 0x0000169C */
+#define IOP331_ICR1       (volatile u32 *)IOP331_REG_ADDR(0x000016A0)
+#define IOP331_ISR1       (volatile u32 *)IOP331_REG_ADDR(0x000016A4)
+#define IOP331_ISAR1      (volatile u32 *)IOP331_REG_ADDR(0x000016A8)
+#define IOP331_IDBR1      (volatile u32 *)IOP331_REG_ADDR(0x000016AC)
+#define IOP331_IBMR1      (volatile u32 *)IOP331_REG_ADDR(0x000016B4)
+/* Reserved 0x000016B8 through 0x000016FF */
+
+/* 0x00001700 through 0x0000172C  UART 0 */
+
+/* Reserved 0x00001730 through 0x0000173F */
+
+/* 0x00001740 through 0x0000176C UART 1 */
+
+#define IOP331_UART0_PHYS  (IOP331_PHYS_MEM_BASE | 0x00001700)	/* UART #1 physical */
+#define IOP331_UART1_PHYS  (IOP331_PHYS_MEM_BASE | 0x00001740)	/* UART #2 physical */
+#define IOP331_UART0_VIRT  (IOP331_VIRT_MEM_BASE | 0x00001700) /* UART #1 virtual addr */
+#define IOP331_UART1_VIRT  (IOP331_VIRT_MEM_BASE | 0x00001740) /* UART #2 virtual addr */
+
+/* Reserved 0x00001770 through 0x0000177F */
+
+/* General Purpose I/O Registers */
+#define IOP331_GPOE       (volatile u32 *)IOP331_REG_ADDR(0x00001780)
+#define IOP331_GPID       (volatile u32 *)IOP331_REG_ADDR(0x00001784)
+#define IOP331_GPOD       (volatile u32 *)IOP331_REG_ADDR(0x00001788)
+
+/* Reserved 0x0000178c through 0x000019ff */
+
+
+#ifndef __ASSEMBLY__
+extern void iop331_map_io(void);
+extern void iop331_init_irq(void);
+extern void iop331_time_init(void);
+#endif
+
+#endif // _IOP331_HW_H_
diff --git a/include/asm-arm/arch-iop3xx/iq31244.h b/include/asm-arm/arch-iop3xx/iq31244.h
new file mode 100644
index 000000000000..4177cfa8100f
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iq31244.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm/arch-iop3xx/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef _IQ31244_H_
+#define _IQ31244_H_
+
+#define	IQ31244_FLASHBASE	0xf0000000	/* Flash */
+#define	IQ31244_FLASHSIZE	0x00800000
+#define	IQ31244_FLASHWIDTH	2
+
+#define IQ31244_UART		0xfe800000	/* UART #1 */
+#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+#ifndef __ASSEMBLY__
+extern void iq31244_map_io(void);
+#endif
+
+#endif	// _IQ31244_H_
diff --git a/include/asm-arm/arch-iop3xx/iq80321.h b/include/asm-arm/arch-iop3xx/iq80321.h
new file mode 100644
index 000000000000..cb8725979ffa
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iq80321.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm/arch-iop3xx/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef _IQ80321_H_
+#define _IQ80321_H_
+
+#define	IQ80321_FLASHBASE	0xf0000000	/* Flash */
+#define	IQ80321_FLASHSIZE	0x00800000
+#define	IQ80321_FLASHWIDTH	1
+
+#define IQ80321_UART		0xfe800000	/* UART #1 */
+#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+#ifndef __ASSEMBLY__
+extern void iq80321_map_io(void);
+#endif
+
+#endif	// _IQ80321_H_
diff --git a/include/asm-arm/arch-iop3xx/iq80331.h b/include/asm-arm/arch-iop3xx/iq80331.h
new file mode 100644
index 000000000000..0668e78d483e
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iq80331.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm/arch-iop3xx/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef _IQ80331_H_
+#define _IQ80331_H_
+
+#define	IQ80331_FLASHBASE	0xc0000000	/* Flash */
+#define	IQ80331_FLASHSIZE	0x00800000
+#define	IQ80331_FLASHWIDTH	1
+
+#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
+
+#ifndef __ASSEMBLY__
+extern void iq80331_map_io(void);
+#endif
+
+#endif	// _IQ80331_H_
diff --git a/include/asm-arm/arch-iop3xx/iq80332.h b/include/asm-arm/arch-iop3xx/iq80332.h
new file mode 100644
index 000000000000..e5fff1775d1a
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/iq80332.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm/arch-iop3xx/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef _IQ80332_H_
+#define _IQ80332_H_
+
+#define	IQ80332_FLASHBASE	0xc0000000	/* Flash */
+#define	IQ80332_FLASHSIZE	0x00800000
+#define	IQ80332_FLASHWIDTH	1
+
+#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
+
+#ifndef __ASSEMBLY__
+extern void iq80332_map_io(void);
+#endif
+
+#endif	// _IQ80332_H_
diff --git a/include/asm-arm/arch-iop3xx/irqs.h b/include/asm-arm/arch-iop3xx/irqs.h
new file mode 100644
index 000000000000..b2c03f4c269c
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/irqs.h
@@ -0,0 +1,21 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/irqs.h
+ *
+ * Copyright:	(C) 2001-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Chipset-specific bits
+ */
+#ifdef CONFIG_ARCH_IOP321
+#include "iop321-irqs.h"
+#endif
+
+#ifdef CONFIG_ARCH_IOP331
+#include "iop331-irqs.h"
+#endif
diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h
new file mode 100644
index 000000000000..dc4735cb0c10
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/memory.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+#include <asm/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#ifndef CONFIG_ARCH_IOP331
+#define PHYS_OFFSET	(0xa0000000UL)
+#else
+#define PHYS_OFFSET	(0x00000000UL)
+#endif
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#if defined(CONFIG_ARCH_IOP321)
+
+#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
+#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
+
+#elif defined(CONFIG_ARCH_IOP331)
+
+#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
+#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
+
+#endif
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
diff --git a/include/asm-arm/arch-iop3xx/param.h b/include/asm-arm/arch-iop3xx/param.h
new file mode 100644
index 000000000000..acf404e87358
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-iop3xx/param.h
+ */
diff --git a/include/asm-arm/arch-iop3xx/system.h b/include/asm-arm/arch-iop3xx/system.h
new file mode 100644
index 000000000000..af6ae8cd36c9
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/system.h
@@ -0,0 +1,35 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/system.h
+ *
+ *  Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_ARCH_IOP321
+    *IOP321_PCSR = 0x30;
+#endif
+
+#ifdef CONFIG_ARCH_IOP331
+    *IOP331_PCSR = 0x30;
+#endif
+
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* No on-chip reset capability */
+		cpu_reset(0);
+	}
+}
+
diff --git a/include/asm-arm/arch-iop3xx/timex.h b/include/asm-arm/arch-iop3xx/timex.h
new file mode 100644
index 000000000000..d4187fe9a85a
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/timex.h
@@ -0,0 +1,21 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+#include <linux/config.h>
+
+
+#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
+
+#define CLOCK_TICK_RATE IOP321_TICK_RATE
+
+#elif defined(CONFIG_ARCH_IQ80331) || defined(CONFIG_MACH_IQ80332)
+
+#define CLOCK_TICK_RATE IOP331_TICK_RATE
+
+#else
+
+#error "No IOP3xx timex information for this architecture"
+
+#endif
diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h
new file mode 100644
index 000000000000..82b88762c3cc
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ *  linux/include/asm-arm/arch-iop3xx/uncompress.h
+ */
+#include <linux/config.h>
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_ARCH_IOP321
+#define UTYPE unsigned char *
+#elif defined(CONFIG_ARCH_IOP331)
+#define UTYPE u32 *
+#else
+#error "Missing IOP3xx arch type def"
+#endif
+
+static volatile UTYPE uart_base;
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static __inline__ void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE);
+	*uart_base = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+        if(machine_is_iq80321())
+			uart_base = (volatile UTYPE)IQ80321_UART;
+		else if(machine_is_iq31244())
+			uart_base = (volatile UTYPE)IQ31244_UART;
+		else if(machine_is_iq80331() || machine_is_iq80332())
+			uart_base = (volatile UTYPE)IOP331_UART0_PHYS;
+		else
+			uart_base = (volatile UTYPE)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop3xx/vmalloc.h b/include/asm-arm/arch-iop3xx/vmalloc.h
new file mode 100644
index 000000000000..dc1d2a957164
--- /dev/null
+++ b/include/asm-arm/arch-iop3xx/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-arm/arch-iop3xx/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+//#define VMALLOC_END       (0xe8000000)
+/* increase usable physical RAM to ~992M per RMK */
+#define VMALLOC_END       (0xfe000000)
+
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
new file mode 100644
index 000000000000..5631e0889861
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/debug-macro.S
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro  addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xc0000000	@ Physical base
+		movne	\rx, #0xfe000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		orr	\rx, \rx, #0x00030000
+#ifdef	__ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #0x14]
+		tst	\rd, #0x20
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+		nop
+		nop
+		nop
+		.endm
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
new file mode 100644
index 000000000000..0fb3568a98dd
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/dma.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+/* No DMA */
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
new file mode 100644
index 000000000000..31ae88674968
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/enp2611.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-arm/arch-ixp2000/enp2611.h
+ *
+ * Register and other defines for Radisys ENP-2611
+ *
+ * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
+ * original version carries the following notices:
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ENP2611_H
+#define __ENP2611_H
+
+#define ENP2611_GPIO_SCL	0x07
+#define ENP2611_GPIO_SDA	0x06
+
+
+#endif
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
new file mode 100644
index 000000000000..e3a4e4121298
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ixp2000/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\irqnr, #0x0              @clear out irqnr as default
+                mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
+		orr	\base, \base, #0x08
+		ldr	\irqstat, [\base]         @ get interrupts
+
+		cmp	\irqstat, #0
+		beq	1001f
+
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+		/*
+		 * We handle PCIA and PCIB here so we don't have an
+		 * extra layer of code just to check these two bits.
+		 */
+		cmp	\irqnr, #IRQ_IXP2000_PCI
+		bne	1001f
+
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00c00000
+		orr	\base, \base, #0x00000100
+		orr	\base, \base, #0x00000058
+		ldr	\irqstat, [\base]
+
+		mov	\tmp, #(1<<26)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIA
+		bne	1001f
+
+		mov	\tmp, #(1<<27)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+		.endm
+
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
new file mode 100644
index 000000000000..84634af5cc64
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/gpio.h
@@ -0,0 +1,55 @@
+/*
+ * include/asm-arm/arch-ixp2000/ixp2000-gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.  
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef _ASM_ARCH_IXP2000_GPIO_H_
+#define _ASM_ARCH_IXP2000_GPIO_H_
+
+#ifndef __ASSEMBLY__
+#define GPIO_OUT			0x0
+#define GPIO_IN				0x80
+
+#define IXP2000_GPIO_LOW		0
+#define IXP2000_GPIO_HIGH		1
+
+#define GPIO_NO_EDGES           	0
+#define GPIO_FALLING_EDGE       	1
+#define GPIO_RISING_EDGE        	2
+#define GPIO_BOTH_EDGES         	3
+#define GPIO_LEVEL_LOW          	4
+#define GPIO_LEVEL_HIGH         	8
+
+extern void set_GPIO_IRQ_edge(int gpio_nr, int edge);
+extern void set_GPIO_IRQ_level(int gpio_nr, int level);
+extern void gpio_line_config(int line, int style);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value == IXP2000_GPIO_HIGH) {
+		ixp_reg_write(IXP2000_GPIO_POSR, BIT(line));
+	} else if (value == IXP2000_GPIO_LOW)
+		ixp_reg_write(IXP2000_GPIO_POCR, BIT(line));
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
+
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h
new file mode 100644
index 000000000000..e7ea781c48aa
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO          0x00000000
+#define PCIBIOS_MIN_MEM         0x00000000
+
+#include "ixp2000-regs.h"	/* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h"		/* ENP-2611 */
+#include "ixdp2x00.h"		/* IXDP2400/2800 */
+#include "ixdp2x01.h"		/* IXDP2401/2801 */
+
+#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
new file mode 100644
index 000000000000..a8e3c2daefd6
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -0,0 +1,150 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002  Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __mem_pci(a)		(a)
+#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+/*
+ * The IXP2400 before revision B0 asserts byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so we need to override the standard functions.  B0 and later
+ * have a bit that can be set to 1 to get the 'proper' behavior, but
+ * since that isn't available on the A? revisions we just keep doing
+ * things manually.
+ */
+#define alignb(addr)		(void __iomem *)((unsigned long)addr ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)addr ^ 2)
+
+#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
+#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
+#define outl(v,p)		__raw_writel((v),___io(p))
+
+#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p)		\
+	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p)		\
+	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
+
+
+#ifdef CONFIG_ARCH_IXDP2X01
+/*
+ * This is an ugly hack but the CS8900 on the 2x01's does not sit in any sort
+ * of "I/O space" and is just direct mapped into a 32-bit-only addressable
+ * bus. The address space for this bus is such that we can't really easily
+ * make it contiguous to the PCI I/O address range, and it also does not
+ * need swapping like PCI addresses do (IXDP2x01 is a BE platform).
+ * B/C of this we can't use the standard in/out functions and need to
+ * runtime check if the incoming address is a PCI address or for
+ * the CS89x0.
+ */
+#undef inw
+#undef outw
+#undef insw
+#undef outsw
+
+#include <asm/mach-types.h>
+
+static inline void insw(u32 ptr, void *buf, int length)
+{
+	register volatile u32 *port = (volatile u32 *)ptr;
+
+	/*
+	 * Is this cycle meant for the CS8900?
+	 */
+	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
+		((port >= IXDP2X01_CS8900_VIRT_BASE) && 
+		 (port <= IXDP2X01_CS8900_VIRT_END))) {
+		u8 *buf8 = (u8*)buf;
+		register u32 tmp32;
+
+		do {
+			tmp32 = *port;
+			*buf8++ = (u8)tmp32;
+			*buf8++ = (u8)(tmp32 >> 8);
+		} while(--length);
+
+		return;
+	}
+
+	__raw_readsw(alignw(___io(ptr)),buf,length);
+}
+
+static inline void outsw(u32 ptr, void *buf, int length)
+{
+	register volatile u32 *port = (volatile u32 *)ptr;
+
+	/*
+	 * Is this cycle meant for the CS8900?
+	 */
+	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
+		((port >= IXDP2X01_CS8900_VIRT_BASE) && 
+		 (port <= IXDP2X01_CS8900_VIRT_END))) {
+		register u32 tmp32;
+		u8 *buf8 = (u8*)buf;
+		do {
+			tmp32 = *buf8++;
+			tmp32 |= (*buf8++) << 8;
+			*port = tmp32;
+		} while(--length);
+		return;
+	}
+
+	__raw_writesw(alignw(___io(ptr)),buf,length);
+}
+
+
+static inline u16 inw(u32 ptr)
+{
+	register volatile u32 *port = (volatile u32 *)ptr;
+
+	/*
+	 * Is this cycle meant for the CS8900?
+	 */
+	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
+		((port >= IXDP2X01_CS8900_VIRT_BASE) && 
+		 (port <= IXDP2X01_CS8900_VIRT_END))) {
+		return (u16)(*port);  
+	}
+
+	return __raw_readw(alignw(___io(ptr)));
+}
+
+static inline void outw(u16 value, u32 ptr)
+{
+	register volatile u32 *port = (volatile u32 *)ptr;
+
+	if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && 
+		((port >= IXDP2X01_CS8900_VIRT_BASE) && 
+		 (port <= IXDP2X01_CS8900_VIRT_END))) {
+		*port = value;  
+		return;
+	}
+
+	__raw_writew((value),alignw(___io(ptr)));
+}
+#endif	/* IXDP2x01 */
+
+#endif
diff --git a/include/asm-arm/arch-ixp2000/irq.h b/include/asm-arm/arch-ixp2000/irq.h
new file mode 100644
index 000000000000..ba00b23f9828
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/irq.h
@@ -0,0 +1,13 @@
+/*
+ *  linux/include/asm-arm/arch-ixp2000/irq.h
+ *
+ *  Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define fixup_irq(irq)  (irq)
+
+
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h
new file mode 100644
index 000000000000..0deb96c12adb
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/irqs.h
@@ -0,0 +1,174 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
+#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
+#define	IRQ_IXP2000_UART		2
+#define	IRQ_IXP2000_GPIO		3
+#define	IRQ_IXP2000_TIMER1     		4
+#define	IRQ_IXP2000_TIMER2     		5
+#define	IRQ_IXP2000_TIMER3     		6
+#define	IRQ_IXP2000_TIMER4     		7
+#define	IRQ_IXP2000_PMU        		8               
+#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
+#define	IRQ_IXP2000_DMA1      		10
+#define	IRQ_IXP2000_DMA2      		11
+#define	IRQ_IXP2000_DMA3      		12
+#define	IRQ_IXP2000_PCI_DOORBELL	13
+#define	IRQ_IXP2000_ME_ATTN       	14 
+#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
+#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
+#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
+#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
+#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
+#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
+#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
+#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
+#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0		32
+#define IRQ_IXP2000_GPIO1		33
+#define IRQ_IXP2000_GPIO2		34
+#define IRQ_IXP2000_GPIO3		35
+#define IRQ_IXP2000_GPIO4		36
+#define IRQ_IXP2000_GPIO5		37
+#define IRQ_IXP2000_GPIO6		38
+#define IRQ_IXP2000_GPIO7		39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA		40
+#define IRQ_IXP2000_PCIB		41
+
+#define NR_IXP2000_IRQS                 42
+
+#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
+
+#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define	IXP2000_BOARD_IRQS		32
+#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/* 
+ * IXDP2400 specific IRQs
+ */
+#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
+#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
+#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
+#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
+#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
+#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
+#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
+#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
+
+#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
+#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
+
+#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
+#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/* 
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/* 
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
+
+#define	IXDP2401_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
+
+#define	IXDP2801_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
new file mode 100644
index 000000000000..3a398dfbf125
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h
@@ -0,0 +1,93 @@
+/*
+ * include/asm-arm/arch-ixp2000/ixdp2x00.h
+ *
+ * Register and other defines for IXDP2[48]00 platforms
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXDP2X00_H_
+#define _IXDP2X00_H_
+
+/*
+ * On board CPLD memory map
+ */
+#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
+#define IXDP2X00_VIRT_CPLD_BASE		0xfafff000
+#define IXDP2X00_CPLD_SIZE		0x00001000
+
+
+#define IXDP2X00_CPLD_REG(x)  	\
+	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
+
+/*
+ * IXDP2400 CPLD registers
+ */
+#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
+#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
+#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
+#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
+#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
+#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
+#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
+#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
+
+/*
+ * IXDP2800 CPLD registers
+ */
+#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
+#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
+
+
+#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X00_GPIO_SCL		0x07
+#define	IXDP2X00_GPIO_SDA		0x06
+
+/*
+ * PCI devfns for on-board devices. We need these to be able to
+ * properly translate IRQs and for device removal.
+ */
+#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
+#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
+#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
+#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
+#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
+#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
+
+#ifndef __ASSEMBLY__
+/*
+ * Master NPU will always have flash and be PCI master.
+ * Slave NPU may or may not have flash but will never be PCI master.
+ */
+static inline unsigned int ixdp2x00_master_npu(void)
+{
+	return ((ixp2000_has_flash()) && (ixp2000_is_pcimaster()));
+}
+
+/*
+ * Helper functions used by ixdp2400 and ixdp2800 specific code
+ */
+void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
+void ixdp2x00_slave_pci_postinit(void);
+void ixdp2x00_init_machine(void);
+void ixdp2x00_map_io(void);
+
+#endif
+
+#endif /*_IXDP2X00_H_ */
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h
new file mode 100644
index 000000000000..b3a1bcda8d01
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/ixdp2x01.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-arm/arch-ixp2000/ixdp2x01.h
+ *
+ * Platform definitions for IXDP2X01 && IXDP2801 systems
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ *
+ * Based on original code Copyright (c) 2002-2003 Intel Corporation
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __IXDP2X01_H__
+#define __IXDP2X01_H__
+
+#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
+#define	IXDP2X01_VIRT_CPLD_BASE		0xfafff000
+#define	IXDP2X01_CPLD_REGION_SIZE	0x00001000
+
+#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (volatile u32*)(IXDP2X01_PHYS_CPLD_BASE | reg)
+
+#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
+#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
+
+#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
+#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
+
+#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
+#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
+
+#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
+#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
+#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
+#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
+#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
+#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
+
+#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
+
+#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
+#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
+#define IXDP2X01_FLASH_WINDOW_BITS 	25
+#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
+#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
+
+#define	IXDP2X01_UART_CLK		1843200
+
+#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X01_GPIO_SCL		0x07
+#define	IXDP2X01_GPIO_SDA		0x06
+
+#endif /* __IXDP2x01_H__ */
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
new file mode 100644
index 000000000000..6c56708d0ff0
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -0,0 +1,377 @@
+/*
+ * include/asm-arm/arch-ixp2000/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/* 
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages.  This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ *    as required per erratum #66.  We accomplish this by using a
+ *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define	IXP2000_CAP_PHYS_BASE		0xc0000000
+#define	IXP2000_CAP_VIRT_BASE		0xfef00000
+#define	IXP2000_CAP_SIZE		0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals
+ */
+#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
+#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
+#define	IXP2000_UART_PHYS_BASE		0xc0030000
+#define	IXP2000_UART_VIRT_BASE		0xfef30000
+#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
+#define	IXP2000_GPIO_VIRT_BASE		0Xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
+#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
+#define	IXP2000_INTCTL_SIZE		0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
+#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
+#define	IXP2000_PCI_CREG_SIZE		0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
+#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
+#define	IXP2000_PCI_CSR_SIZE		0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
+#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
+#define IXP2000_PCI_IO_SIZE     	0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
+#define IXP2000_PCI_CFG0_SIZE   	0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
+#define IXP2000_PCI_CFG1_SIZE		0x01000000
+
+/* 
+ * Timers
+ */
+#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
+#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
+#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
+#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
+#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
+#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
+#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
+#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
+#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
+#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
+#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
+#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
+#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
+
+#define	WDT_ENABLE			0x00000001
+#define	TIMER_DIVIDER_256		0x00000008
+#define	TIMER_ENABLE			0x00000080
+#define	IRQ_MASK_TIMER1         	(1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Centrolfunction bit */
+#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
+#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
+#define PCI_CONTROL_PNR			(1 << 17)	/* PCI Not Reset bit */
+
+#define IXP2000_PCI_RST_REL		(1 << 2)
+#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST		(1 << 2)
+#define CFG_BOOT_PROM			(1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
+#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
+#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
+#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
+#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
+#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
+#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
+#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
+#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
+#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
+#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.  
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define	SLOWPORT_CCR_DIV_1		0x00
+#define	SLOWPORT_CCR_DIV_2		0x01
+#define	SLOWPORT_CCR_DIV_4		0x02
+#define	SLOWPORT_CCR_DIV_6		0x03
+#define	SLOWPORT_CCR_DIV_8		0x04
+#define	SLOWPORT_CCR_DIV_10		0x05
+#define	SLOWPORT_CCR_DIV_12		0x06
+#define	SLOWPORT_CCR_DIV_14		0x07
+#define	SLOWPORT_CCR_DIV_16		0x08
+#define	SLOWPORT_CCR_DIV_18		0x09
+#define	SLOWPORT_CCR_DIV_20		0x0a
+#define	SLOWPORT_CCR_DIV_22		0x0b
+#define	SLOWPORT_CCR_DIV_24		0x0c
+#define	SLOWPORT_CCR_DIV_26		0x0d
+#define	SLOWPORT_CCR_DIV_28		0x0e
+#define	SLOWPORT_CCR_DIV_30		0x0f
+
+/*
+ * PCR values.  PCR configure the mode of the interface.
+ */
+#define	SLOWPORT_MODE_FLASH		0x00
+#define	SLOWPORT_MODE_LUCENT		0x01
+#define	SLOWPORT_MODE_PMC_SIERRA	0x02
+#define	SLOWPORT_MODE_INTEL_UP		0x03
+#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
+
+/*
+ * ADC values.  Defines data and address bus widths.
+ */
+#define	SLOWPORT_ADDR_WIDTH_8		0x00
+#define	SLOWPORT_ADDR_WIDTH_16		0x01
+#define	SLOWPORT_ADDR_WIDTH_24		0x02
+#define	SLOWPORT_ADDR_WIDTH_32		0x03
+#define	SLOWPORT_DATA_WIDTH_8		0x00
+#define	SLOWPORT_DATA_WIDTH_16		0x10
+#define	SLOWPORT_DATA_WIDTH_24		0x20
+#define	SLOWPORT_DATA_WIDTH_32		0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define	SLOWPORT_WRTC_MASK_HD		0x0003
+#define	SLOWPORT_WRTC_MASK_SU		0x003c
+#define	SLOWPORT_WRTC_MASK_PW		0x03c0
+
+#define	SLOWPORT_WRTC_SHIFT_HD		0x00
+#define	SLOWPORT_WRTC_SHIFT_SU		0x02
+#define	SLOWPORT_WRTC_SHFIT_PW		0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_PROD_ID			GLOBAL_REG(0x00)
+
+#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
+#define IXP2000_MAJ_REV_MASK	      	0x000000F0
+#define IXP2000_MIN_REV_MASK	      	0x0000000F
+#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
+
+#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
+#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
+#define IXP2000_RESET1      		GLOBAL_REG(0x10)
+#define IXP2000_CCR            		GLOBAL_REG(0x14)
+#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
+
+#define	RSTALL				(1 << 16)
+#define	WDT_RESET_ENABLE		0x01000000
+
+
+#endif				/* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
new file mode 100644
index 000000000000..d0f415c6dae9
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/memory.h
@@ -0,0 +1,34 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	(0x00000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#include <asm/arch/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/include/asm-arm/arch-ixp2000/param.h b/include/asm-arm/arch-ixp2000/param.h
new file mode 100644
index 000000000000..2646d9e5919d
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-ixp2000/param.h
+ */
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
new file mode 100644
index 000000000000..509e44d528d8
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -0,0 +1,166 @@
+/*
+ * include/asm-arm/arch-ixp2000/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The IXP2400 B0 silicon contains an erratum (#66) that causes writes
+ * to on-chip I/O register to not complete fully. What this means is
+ * that if you have a write to on-chip I/O followed by a back-to-back
+ * read or write, the first write will happen twice. OR...if it's
+ * not a back-to-back transaction, the read or write will generate
+ * incorrect data.
+ *
+ * The official work around for this is to set the on-chip I/O regions
+ * as XCB=101 and then force a read-back from the register.
+ *
+ */
+#if defined(CONFIG_ARCH_ENP2611) || defined(CONFIG_ARCH_IXDP2400) || defined(CONFIG_ARCH_IXDP2401)
+
+#include <asm/system.h>		/* Pickup local_irq_ functions */
+
+static inline void ixp2000_reg_write(volatile unsigned long *reg, unsigned long val)
+{
+	volatile unsigned long dummy;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*reg = val;
+	barrier();
+	dummy = *reg;
+	local_irq_restore(flags);
+}
+#else
+#define	ixp2000_reg_write(reg, val) (*reg = val)
+#endif	/* IXDP2400 || IXDP2401 */
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of 
+ * the slowport interface that each need different configuration 
+ * settings.  For example, the IXDP2400 uses channel 2 on the interface 
+ * to access the CPLD, the switch fabric card, and the media card.  Each
+ * one needs a different mode so drivers must save/restore the mode 
+ * before and after each operation.  
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.  
+ */
+struct slowport_cfg {
+	unsigned long CCR;	/* Clock divide */
+	unsigned long WTC;	/* Write Timing Control */
+	unsigned long RTC;	/* Read Timing Control */
+	unsigned long PCR;	/* Protocol Control Register */
+	unsigned long ADC;	/* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+	unsigned long id = *IXP2000_PROD_ID;
+	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+				      IXP2000_MIN_PROD_TYPE_MASK);
+	return (((id_prod ==
+		  /* fixed in IXP2400-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2800-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2850-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+	struct flash_platform_data *platform_data;
+	int nr_banks;
+	unsigned long (*bank_setup)(unsigned long);
+};
+
+/*
+ * GPIO helper functions
+ */
+#define	GPIO_IN		0
+#define	GPIO_OUT	1
+
+extern void gpio_line_config(int line, int style);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value) 
+		ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line));
+	else 
+		ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line));
+}
+
+struct ixp2000_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+#endif /*  !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
new file mode 100644
index 000000000000..4f489cc0dfa5
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/system.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	if (machine_is_ixdp2401()) {
+		*IXDP2X01_CPLD_FLASH_REG = ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN);
+		*IXDP2X01_CPLD_RESET_REG = 0xffffffff;
+	}
+
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and moves the flash bank register back to 0.
+	 */
+	if (machine_is_ixdp2801()) {
+		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+		*IXDP2X01_CPLD_RESET_REG = reset_reg;
+		mb();
+		*IXDP2X01_CPLD_RESET_REG = 0x80000000;
+	}
+
+	/*
+	 * We do a reset all if we are PCI master. We could be a slave and we
+	 * don't want to do anything funky on the PCI bus.
+	 */
+	if (*IXP2000_STRAP_OPTIONS & CFG_PCI_BOOT_HOST) {
+		*(IXP2000_RESET0) |= (RSTALL);
+	}
+}
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h
new file mode 100644
index 000000000000..b78a183d4698
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/timex.h
@@ -0,0 +1,13 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE	50000000
+
+
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h
new file mode 100644
index 000000000000..3d3d5b2ed6e9
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/uncompress.h
@@ -0,0 +1,52 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE	0xc0030000
+
+#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
+#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
+#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
+#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
+#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
+#define UARTLCR         PHYS(0x0c)      /* Control reg */
+#define UARTSR          PHYS(0x14)      /* Status reg */
+
+
+static __inline__ void putc(char c)
+{
+	int j = 0x1000;
+
+	while (--j && !(*UARTSR & UART_LSR_THRE)); 
+	*UARTDR = c;
+}
+
+static void putstr(const char *s)
+{
+	while (*s)
+	{
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h
new file mode 100644
index 000000000000..2e4bcbcf31f0
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-arm/arch-ixp2000/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	    (8*1024*1024)
+#define VMALLOC_START	    (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x)   ((unsigned long)(x))
+#define VMALLOC_END	    0xfaffefff
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
new file mode 100644
index 000000000000..dd0c2d2d8503
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/coyote.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-ixp4xx/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define	COYOTE_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	COYOTE_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE * 2
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define	COYOTE_PCI_SLOT0_PIN	6
+#define	COYOTE_PCI_SLOT1_PIN	11
+
+#define	COYOTE_PCI_SLOT0_DEVID	14
+#define	COYOTE_PCI_SLOT1_DEVID	15
+
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_CS3_BASE_PHYS
+#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define	COYOTE_IDE_REGION_SIZE	0x1000
+
+#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
new file mode 100644
index 000000000000..4499ae8e4b44
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0xc8000000
+                movne   \rx, #0xff000000
+                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
+						@ byte writes used - Big Endian.
+                .endm
+
+               .macro  senduart,rd,rx
+                strb    \rd, [\rx]
+                .endm
+
+                .macro  waituart,rd,rx
+1002:           ldrb    \rd, [\rx, #0x14]
+                and     \rd, \rd, #0x60		@ check THRE and TEMT bits
+                teq     \rd, #0x60
+                bne     1002b
+                .endm
+
+                .macro  busyuart,rd,rx
+                .endm
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
new file mode 100644
index 000000000000..312065dc0e7a
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/dma.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-ixp4xx/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/config.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/hardware.h>
+
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
+
+/* No DMA */
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
new file mode 100644
index 000000000000..455da64832de
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-ixp4xx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get interrupts
+		cmp	\irqstat, #0
+		beq	1001f
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+1001:
+		/*
+		 * IXP465 has an upper IRQ status register
+		 */
+#if defined(CONFIG_CPU_IXP46X)
+		bne 	1002f
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get upper interrupts
+		mov	\irqnr, #63
+		clz	\irqstat, \irqstat
+ 		cmp	\irqstat, #32
+		subne	\irqnr, \irqnr, \irqstat
+1002:
+#endif
+		.endm
+
+
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
new file mode 100644
index 000000000000..fc460af70627
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/gtwx5715.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-arm/arch-ixp4xx/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0	0
+#define GTWX5715_GPIO1	1
+#define GTWX5715_GPIO2	2
+#define GTWX5715_GPIO3	3
+#define GTWX5715_GPIO4	4
+#define GTWX5715_GPIO5	5
+#define GTWX5715_GPIO6	6
+#define GTWX5715_GPIO7	7
+#define GTWX5715_GPIO8	8
+#define GTWX5715_GPIO9	9
+#define GTWX5715_GPIO10	10
+#define GTWX5715_GPIO11	11
+#define GTWX5715_GPIO12	12
+#define GTWX5715_GPIO13	13
+#define GTWX5715_GPIO14	14
+
+#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
+
+
+#define	GTWX5715_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	GTWX5715_FLASH_SIZE	(0x00800000)
+
+/* PCI controller GPIO to IRQ pin mappings
+
+			INTA	INTB
+SLOT 0	10		11
+SLOT 1	11		10
+
+*/
+
+#define	GTWX5715_PCI_SLOT0_DEVID	0
+#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
+#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
+
+#define	GTWX5715_PCI_SLOT1_DEVID	1
+#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
+#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT			2
+#define GTWX5715_PCI_INT_PIN_COUNT		2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface.  The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
+
+/*
+ *  Board Label      Front Label
+ *  LED1             Power
+ *  LED2             Wireless-G
+ *  LED3             not populated but could be
+ *  LED4             Internet
+ *  LED5 - LED8      Controlled by KS8995M Switch
+ *  LED9             DMZ
+ */
+
+#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
new file mode 100644
index 000000000000..4ac964b9078a
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-arm/arch-ixp4xx/hardware.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x48000000
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+#if defined(CONFIG_CPU_IXP465) && !defined(__ASSEMBLY__)
+extern unsigned int processor_id;
+#define cpu_is_ixp465() ((processor_id & 0xffffffc0) == 0x69054200)
+#else
+#define	cpu_is_ixp465()	(0)
+#endif
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
new file mode 100644
index 000000000000..c27b9d3079a7
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -0,0 +1,388 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2004  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+#define	BIT(x)	((1)<<(x))
+
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ *    To access PCI via this space, we simply ioremap() the BAR
+ *    into the kernel and we can use the standard read[bwl]/write[bwl]
+ *    macros. This is the preffered method due to speed but it
+ *    limits the system to just 64MB of PCI memory. This can be 
+ *    problamatic if using video cards and other memory-heavy
+ *    targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ *    to use indirect registers to access PCI (as we do below for I/O
+ *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ *    of memory on the bus. The disadvantadge of this is that every 
+ *    PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition,
+ *    you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a)		(a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the 
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags, unsigned long align)
+{
+	extern void __iomem * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
+	if((addr < 0x48000000) || (addr > 0x4fffffff))
+		return __ioremap(addr, size, flags, align);
+
+	return (void *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+	extern void __iounmap(void __iomem *addr);
+
+	if ((u32)addr >= VMALLOC_START)
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f, x)	__ixp4xx_ioremap(a, s, f, x)
+#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+
+#define	writeb(p, v)			__ixp4xx_writeb(p, v)
+#define	writew(p, v)			__ixp4xx_writew(p, v)
+#define	writel(p, v)			__ixp4xx_writel(p, v)
+
+#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
+#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
+#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
+	
+#define	readb(p)			__ixp4xx_readb(p)
+#define	readw(p)			__ixp4xx_readw(p)
+#define	readl(p)			__ixp4xx_readl(p)
+	
+#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
+#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
+#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+
+static inline void 
+__ixp4xx_writeb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writeb(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
+{
+	while (count--)
+		writeb(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writew(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writew(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
+{
+	while (count--)
+		writew(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writel(u32 value, u32 addr)
+{
+	if (addr >= VMALLOC_START) {
+		__raw_writel(value, addr);
+		return;
+	}
+
+	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
+{
+	while (count--)
+		writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char 
+__ixp4xx_readb(u32 addr)
+{
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readb(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short 
+__ixp4xx_readw(u32 addr)
+{
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readw(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long 
+__ixp4xx_readl(u32 addr)
+{
+	u32 data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readl(addr);
+
+	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l)		_memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(unsigned long bus_addr, const unsigned char *signature,
+		int length)
+{
+	int retval = 0;
+	do {
+		if (readb(bus_addr) != *signature)
+			goto out;
+		bus_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#endif
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window.  Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction.  This means that we need to override the default
+ * I/O functions.
+ */
+#define	outb(p, v)			__ixp4xx_outb(p, v)
+#define	outw(p, v)			__ixp4xx_outw(p, v)
+#define	outl(p, v)			__ixp4xx_outl(p, v)
+	
+#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
+#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
+#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
+
+#define	inb(p)				__ixp4xx_inb(p)
+#define	inw(p)				__ixp4xx_inw(p)
+#define	inl(p)				__ixp4xx_inl(p)
+
+#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
+#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
+#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
+
+
+static inline void 
+__ixp4xx_outb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+	while (count--)
+		outb(*vaddr++, io_addr);
+}
+
+static inline void 
+__ixp4xx_outw(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+	while (count--)
+		outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void 
+__ixp4xx_outl(u32 value, u32 addr)
+{
+	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void 
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+	while (count--)
+		outl(*vaddr++, io_addr);
+}
+
+static inline u8 
+__ixp4xx_inb(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void 
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inb(io_addr);
+}
+
+static inline u16 
+__ixp4xx_inw(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32 
+__ixp4xx_inl(u32 addr)
+{
+	u32 data;
+	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inl(io_addr);
+}
+
+
+#endif	//  __ASM_ARM_ARCH_IO_H
+
diff --git a/include/asm-arm/arch-ixp4xx/irq.h b/include/asm-arm/arch-ixp4xx/irq.h
new file mode 100644
index 000000000000..87da70695f0a
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/irq.h
@@ -0,0 +1,13 @@
+/*
+ * irq.h 
+ *
+ *  Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define fixup_irq(irq)  (irq)
+
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
new file mode 100644
index 000000000000..ca808281c7f9
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-ixp4xx/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA		0
+#define IRQ_IXP4XX_NPEB		1
+#define IRQ_IXP4XX_NPEC		2
+#define IRQ_IXP4XX_QM1		3
+#define IRQ_IXP4XX_QM2		4
+#define IRQ_IXP4XX_TIMER1	5
+#define IRQ_IXP4XX_GPIO0	6
+#define IRQ_IXP4XX_GPIO1	7
+#define IRQ_IXP4XX_PCI_INT	8
+#define IRQ_IXP4XX_PCI_DMA1	9
+#define IRQ_IXP4XX_PCI_DMA2	10
+#define IRQ_IXP4XX_TIMER2	11
+#define IRQ_IXP4XX_USB		12
+#define IRQ_IXP4XX_UART2	13
+#define IRQ_IXP4XX_TIMESTAMP	14
+#define IRQ_IXP4XX_UART1	15
+#define IRQ_IXP4XX_WDOG		16
+#define IRQ_IXP4XX_AHB_PMU	17
+#define IRQ_IXP4XX_XSCALE_PMU	18
+#define IRQ_IXP4XX_GPIO2	19
+#define IRQ_IXP4XX_GPIO3	20
+#define IRQ_IXP4XX_GPIO4	21
+#define IRQ_IXP4XX_GPIO5	22
+#define IRQ_IXP4XX_GPIO6	23
+#define IRQ_IXP4XX_GPIO7	24
+#define IRQ_IXP4XX_GPIO8	25
+#define IRQ_IXP4XX_GPIO9	26
+#define IRQ_IXP4XX_GPIO10	27
+#define IRQ_IXP4XX_GPIO11	28
+#define IRQ_IXP4XX_GPIO12	29
+#define IRQ_IXP4XX_SW_INT1	30
+#define IRQ_IXP4XX_SW_INT2	31
+#define IRQ_IXP4XX_USB_HOST	32
+#define IRQ_IXP4XX_I2C		33
+#define IRQ_IXP4XX_SSP		34
+#define IRQ_IXP4XX_TSYNC	35
+#define IRQ_IXP4XX_EAU_DONE	36
+#define IRQ_IXP4XX_SHA_DONE	37
+#define IRQ_IXP4XX_SWCP_PE	58
+#define IRQ_IXP4XX_QM_PE	60
+#define IRQ_IXP4XX_MCU_ECC	61
+#define IRQ_IXP4XX_EXP_PE	62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#ifndef	CONFIG_CPU_IXP46X
+#define NR_IRQS			32
+#else
+#define NR_IRQS			64
+#endif
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
new file mode 100644
index 000000000000..7d21bf941379
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/ixdp425.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-ixp4xx/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define	IXDP425_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	IXDP425_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	IXDP425_SDA_PIN		7
+#define	IXDP425_SCL_PIN		6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV	4
+#define IXDP425_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN	11
+#define IXDP425_PCI_INTB_PIN	10
+#define	IXDP425_PCI_INTC_PIN	9
+#define	IXDP425_PCI_INTD_PIN	8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
new file mode 100644
index 000000000000..8eeb1db6309d
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -0,0 +1,591 @@
+/*
+ * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains 
+ * register location and bit definitions only. Platform specific 
+ * definitions and helper function declarations are in platform.h 
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy		Size		Virt		Description
+ * =========================================================================
+ *
+ * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
+ *
+ * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
+ *
+ * 0x50000000	0x10000000	ioremap'd	EXP BUS
+ *
+ * 0x6000000	0x00004000	ioremap'd	QMgr
+ *
+ * 0xC0000000	0x00001000	0xffbfe000	PCI CFG 
+ *
+ * 0xC4000000	0x00001000	0xffbfd000	EXP CFG 
+ *
+ * 0xC8000000	0x0000C000	0xffbf2000	On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFD000)
+#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBF2000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x0000C000)
+
+#define IXP4XX_EXP_CS0_OFFSET	0x00
+#define IXP4XX_EXP_CS1_OFFSET   0x04
+#define IXP4XX_EXP_CS2_OFFSET   0x08
+#define IXP4XX_EXP_CS3_OFFSET   0x0C
+#define IXP4XX_EXP_CS4_OFFSET   0x10
+#define IXP4XX_EXP_CS5_OFFSET   0x14
+#define IXP4XX_EXP_CS6_OFFSET   0x18
+#define IXP4XX_EXP_CS7_OFFSET   0x1C
+#define IXP4XX_EXP_CFG0_OFFSET	0x20
+#define IXP4XX_EXP_CFG1_OFFSET	0x24
+#define IXP4XX_EXP_CFG2_OFFSET	0x28
+#define IXP4XX_EXP_CFG3_OFFSET	0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
+#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
+#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
+#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
+#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
+#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_EthA_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthB_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+
+#define IXP4XX_UART1_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_EthA_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthB_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+
+/*
+ * Constants to make it easy to access  Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
+#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
+#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
+#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+                                                                                
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
+#define IXP4XX_GPIO_GPOER_OFFSET        0x04
+#define IXP4XX_GPIO_GPINR_OFFSET        0x08
+#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
+
+/* 
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+/* 
+ * Mask used to clear interrupt styles 
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR		0x7
+#define IXP4XX_GPIO_STYLE_SIZE		3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions 
+ */
+#define IXP4XX_OST_ENABLE		0x00000001
+#define IXP4XX_OST_ONE_SHOT		0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK		0x00000003
+#define IXP4XX_OST_DISABLED		0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
+
+#define	IXP4XX_WDT_KEY			0x0000482E
+
+#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
+#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
+#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET            0x00
+#define PCI_NP_CBE_OFFSET           0x04
+#define PCI_NP_WDATA_OFFSET         0x08
+#define PCI_NP_RDATA_OFFSET         0x0c
+#define PCI_CRP_AD_CBE_OFFSET       0x10
+#define PCI_CRP_WDATA_OFFSET        0x14
+#define PCI_CRP_RDATA_OFFSET        0x18
+#define PCI_CSR_OFFSET              0x1c
+#define PCI_ISR_OFFSET              0x20
+#define PCI_INTEN_OFFSET            0x24
+#define PCI_DMACTRL_OFFSET          0x28
+#define PCI_AHBMEMBASE_OFFSET       0x2c
+#define PCI_AHBIOBASE_OFFSET        0x30
+#define PCI_PCIMEMBASE_OFFSET       0x34
+#define PCI_AHBDOORBELL_OFFSET      0x38
+#define PCI_PCIDOORBELL_OFFSET      0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions 
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST    	0x00000001
+#define PCI_CSR_ARBEN   	0x00000002
+#define PCI_CSR_ADS     	0x00000004
+#define PCI_CSR_PDS     	0x00000008
+#define PCI_CSR_ABE     	0x00000010
+#define PCI_CSR_DBT     	0x00000020
+#define PCI_CSR_ASE     	0x00000100
+#define PCI_CSR_IC      	0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE     	0x00000001
+#define PCI_ISR_PFE     	0x00000002
+#define PCI_ISR_PPE     	0x00000004
+#define PCI_ISR_AHBE    	0x00000008
+#define PCI_ISR_APDC    	0x00000010
+#define PCI_ISR_PADC    	0x00000020
+#define PCI_ISR_ADB     	0x00000040
+#define PCI_ISR_PDB     	0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE   	0x00000001
+#define PCI_INTEN_PFE   	0x00000002
+#define PCI_INTEN_PPE   	0x00000004
+#define PCI_INTEN_AHBE  	0x00000008
+#define PCI_INTEN_APDC  	0x00000010
+#define PCI_INTEN_PADC  	0x00000020
+#define PCI_INTEN_ADB   	0x00000040
+#define PCI_INTEN_PDB   	0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL		4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE	0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
+/* UDC Control Register */
+#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
+/* UDC Frame Number Register High */
+#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
+/* UDC Frame Number Register Low */
+#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
+/* UDC Byte Count Reg 2 */
+#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
+/* UDC Byte Count Reg 4 */
+#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
+/* UDC Byte Count Reg 7 */
+#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
+/* UDC Byte Count Reg 9 */
+#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
+/* UDC Byte Count Reg 12 */
+#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
+/* UDC Byte Count Reg 14 */
+#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
+/* UDC Endpoint 0 Data Register */
+#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
+/* UDC Endpoint 1 Data Register */
+#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
+/* UDC Endpoint 2 Data Register */
+#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
+/* UDC Endpoint 3 Data Register */
+#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
+/* UDC Endpoint 4 Data Register */
+#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
+/* UDC Endpoint 5 Data Register */
+#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
+/* UDC Endpoint 6 Data Register */
+#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
+/* UDC Endpoint 7 Data Register */
+#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
+/* UDC Endpoint 8 Data Register */
+#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
+/* UDC Endpoint 9 Data Register */
+#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
+/* UDC Endpoint 10 Data Register */
+#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
+/* UDC Endpoint 11 Data Register */
+#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
+/* UDC Endpoint 12 Data Register */
+#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
+/* UDC Endpoint 13 Data Register */
+#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
+/* UDC Endpoint 14 Data Register */
+#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
+/* UDC Endpoint 15 Data Register */
+#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
+/* UDC Interrupt Control Register 0 */
+#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
+/* UDC Interrupt Control Register 1 */
+#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
+/* UDC Status Interrupt Register 0 */
+#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
+/* UDC Status Interrupt Register 1 */
+#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+#ifndef __ASSEMBLY__
+static inline int cpu_is_ixp46x(void)
+{
+#ifdef CONFIG_CPU_IXP46X
+	unsigned int processor_id;
+
+	asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
+
+	if ((processor_id & 0xffffff00) == 0x69054200)
+		return 1;
+#endif
+	return 0;
+}
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
new file mode 100644
index 000000000000..d348548b592b
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -0,0 +1,61 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x00000000UL)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, 
+	unsigned long *zhole_size) 
+{
+	unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+	/*
+	 * Only adjust if > 64M on current system
+	 */
+	if (node || (zone_size[0] <= sz))
+		return;
+
+	zone_size[1] = zone_size[0] - sz;
+	zone_size[0] = sz;
+	zhole_size[1] = zhole_size[0];
+	zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/param.h b/include/asm-arm/arch-ixp4xx/param.h
new file mode 100644
index 000000000000..8a757125e5e7
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/param.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/param.h
+ */
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
new file mode 100644
index 000000000000..3a626c03ea26
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/arch-ixp4xx/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef	__ARMEB__
+#define	REG_OFFSET	0
+#else
+#define	REG_OFFSET	3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
+
+#define	IXP4XX_EXP_BUS_CSX_REGION_SIZE	(0x01000000)
+
+#define IXP4XX_EXP_BUS_CS0_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
+#define IXP4XX_EXP_BUS_CS1_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
+#define IXP4XX_EXP_BUS_CS2_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
+#define IXP4XX_EXP_BUS_CS3_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
+#define IXP4XX_EXP_BUS_CS4_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
+#define IXP4XX_EXP_BUS_CS5_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
+#define IXP4XX_EXP_BUS_CS6_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
+#define IXP4XX_EXP_BUS_CS7_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
+
+#define IXP4XX_FLASH_WRITABLE	(0x2)
+#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL        	14745600
+
+/*
+ * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
+ * used to 
+ * Used as platform_data to provide GPIO pin information to the ixp42x
+ * I2C driver.
+ */
+struct ixp4xx_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+
+struct sys_timer;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+#define IXP4XX_GPIO_INTSTYLE_MASK	0x7C  /* Bits [6:2] define interrupt style */
+
+/* 
+ * GPIO interrupt types.
+ */
+#define IXP4XX_GPIO_ACTIVE_HIGH		0x4 /* Default */
+#define IXP4XX_GPIO_ACTIVE_LOW		0x8
+#define IXP4XX_GPIO_RISING_EDGE		0x10
+#define IXP4XX_GPIO_FALLING_EDGE 	0x20
+#define IXP4XX_GPIO_TRANSITIONAL 	0x40
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+extern void gpio_line_config(u8 line, u32 style);
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+static inline void gpio_line_isr_clear(u8 line)
+{
+	*IXP4XX_GPIO_GPISR = (1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h
new file mode 100644
index 000000000000..e2532ab7f48f
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-ixp4xx/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	PRPMC1100_PCI_MIN_DEVID	10
+#define	PRPMC1100_PCI_MAX_DEVID	16
+#define	PRPMC1100_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN	11
+#define PRPMC1100_PCI_INTB_PIN	10
+#define	PRPMC1100_PCI_INTC_PIN	9
+#define	PRPMC1100_PCI_INTD_PIN	8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
new file mode 100644
index 000000000000..73589aad8dd6
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/system.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-arm/arch-ixp4x//system.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
+
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
new file mode 100644
index 000000000000..38c9d77d3727
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/timex.h
@@ -0,0 +1,13 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/timex.h
+ * 
+ */
+
+#include <asm/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at 
+ * 66.66... MHz
+ */
+#define CLOCK_TICK_RATE (66666666)
+
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
new file mode 100644
index 000000000000..960c35810a22
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/uncompress.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-arm/arch-ixp4xx/uncompress.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static __inline__ void putc(char c)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE); 
+	*uart_base = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s)
+	{
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Coyote and gtwx5715 only have UART2 connected
+	 */
+	if (machine_is_adi_coyote() || machine_is_gtwx5715())
+		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+	else
+		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
new file mode 100644
index 000000000000..da46e560ad6f
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/vmalloc.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END       (0xFF000000)
+
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
new file mode 100644
index 000000000000..762cbc76c501
--- /dev/null
+++ b/include/asm-arm/arch-l7200/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/arch-l7200/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   08-02-2000	SJH	Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <asm/arch/hardware.h>
+
+#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR		0x00000000
+#define AUX_DIAG_LED_ON		0x00000002
+#define AUX_RTS_UART1		0x00000004
+#define AUX_DTR_UART1		0x00000008
+#define AUX_KBD_COLUMN_12_HIGH	0x00000010
+#define AUX_KBD_COLUMN_12_OFF	0x00000020
+#define AUX_KBD_COLUMN_13_HIGH	0x00000040
+#define AUX_KBD_COLUMN_13_OFF	0x00000080
+
+#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
new file mode 100644
index 000000000000..846473318e8b
--- /dev/null
+++ b/include/asm-arm/arch-l7200/debug-macro.S
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/arch-l7200/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
new file mode 100644
index 000000000000..6595b386cfc9
--- /dev/null
+++ b/include/asm-arm/arch-l7200/dma.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/arch-l7200/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+#define MAX_DMA_CHANNELS        0
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
new file mode 100644
index 000000000000..8b6342dc4be2
--- /dev/null
+++ b/include/asm-arm/arch-l7200/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-l7200/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
new file mode 100644
index 000000000000..6f20962df248
--- /dev/null
+++ b/include/asm-arm/arch-l7200/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * linux/include/asm-arm/arch-l7200/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   07-28-2000	SJH	Created file
+ *   08-02-2000	SJH	Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <asm/arch/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+	unsigned int TIMERLOAD;
+	unsigned int TIMERVALUE;
+	unsigned int TIMERCONTROL;
+	unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE		(IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define	GPT_PRESCALE_1		0x00000000
+#define	GPT_PRESCALE_16		0x00000004
+#define	GPT_PRESCALE_256	0x00000008
+#define GPT_MODE_FREERUN	0x00000000
+#define GPT_MODE_PERIODIC	0x00000040
+#define GPT_ENABLE		0x00000080
+#define GPT_BZTOG		0x00000100
+#define GPT_BZMOD		0x00000200
+#define GPT_LOAD_MASK 		0x0000ffff
+
+#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
new file mode 100644
index 000000000000..0b63e4239bdd
--- /dev/null
+++ b/include/asm-arm/arch-l7200/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      linux/include/asm-arm/arch-l7200/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
new file mode 100644
index 000000000000..b755079befab
--- /dev/null
+++ b/include/asm-arm/arch-l7200/hardware.h
@@ -0,0 +1,60 @@
+/*
+ * linux/include/asm-arm/arch-l7200/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define FLUSH_BASE_PHYS		0x40000000	/* ROM */
+#define FLUSH_BASE		0xdf000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
new file mode 100644
index 000000000000..fc012a39e2cb
--- /dev/null
+++ b/include/asm-arm/arch-l7200/io.h
@@ -0,0 +1,76 @@
+/*
+ * linux/include/asm-arm/arch-l7200/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/arch/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+#define __io_pci(a)		((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#define __ioaddr(p)             __io_pci(p)
+
+/*
+ * Generic virtual read/write
+ */
+#define __arch_getb(a)          (*(volatile unsigned char *)(a))
+#define __arch_getl(a)          (*(volatile unsigned int  *)(a))
+
+static inline unsigned int __arch_getw(unsigned long a)
+{
+	unsigned int value;
+	__asm__ __volatile__("ldr%?h    %0, [%1, #0]    @ getw"
+		: "=&r" (value)
+		: "r" (a));
+	return value;
+}
+
+#define __arch_putb(v,a)        (*(volatile unsigned char *)(a) = (v))
+#define __arch_putl(v,a)        (*(volatile unsigned int  *)(a) = (v))
+
+static inline void __arch_putw(unsigned int value, unsigned long a)
+{
+        __asm__ __volatile__("str%?h    %0, [%1, #0]    @ putw"
+                : : "r" (value), "r" (a));
+}
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)		(*(volatile unsigned char *)(p) = (v))
+#define inb_t(p)		(*(volatile unsigned char *)(p))
+#define outw_t(v,p)		(*(volatile unsigned int *)(p) = (v))
+#define inw_t(p)		(*(volatile unsigned int *)(p))
+#define outl_t(v,p)		(*(volatile unsigned long *)(p) = (v))
+#define inl_t(p)		(*(volatile unsigned long *)(p))
+
+/*
+ * FIXME - These are to allow for linking. On all the other
+ *         ARM platforms, the entire IO space is contiguous.
+ *         The 7200 has three separate IO spaces. The below
+ *         macros will eventually become more involved. Use
+ *         with caution and don't be surprised by kernel oopses!!!
+ */
+#define inb(p)		 	inb_t(p)
+#define inw(p)	 		inw_t(p)
+#define inl(p)	 		inl_t(p)
+#define outb(v,p)		outb_t(v,p)
+#define outw(v,p)		outw_t(v,p)
+#define outl(v,p)		outl_t(v,p)
+
+#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
new file mode 100644
index 000000000000..7120c016e29e
--- /dev/null
+++ b/include/asm-arm/arch-l7200/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-l7200/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
new file mode 100644
index 000000000000..c5b9608cb137
--- /dev/null
+++ b/include/asm-arm/arch-l7200/memory.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-arm/arch-l7200/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     (0xf0000000UL)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-l7200/param.h b/include/asm-arm/arch-l7200/param.h
new file mode 100644
index 000000000000..9962a12ab158
--- /dev/null
+++ b/include/asm-arm/arch-l7200/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-l7200/param.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   04-21-2000 RS      Created L7200 version
+ *   04-25-2000 SJH     Cleaned up file
+ *   05-03-2000 SJH     Change comments and rate
+ */
+
+/*
+ * See 'time.h' for how the RTC HZ rate is set
+ */
+#define HZ 128
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
new file mode 100644
index 000000000000..730056c194be
--- /dev/null
+++ b/include/asm-arm/arch-l7200/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-arm/arch-l7200/pmpcon.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   DC/DC converter register.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
+#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST     0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
+	
+/* PMPCON = 0x811;   // too light and fuzzy
+ * PMPCON = 0x844;   
+ * PMPCON = 0x866;   // better color poor depth
+ * PMPCON = 0x888;   // Darker but better depth 
+ * PMPCON = 0x899;   // Darker even better depth
+ * PMPCON = 0x8aa;   // too dark even better depth
+ * PMPCON = 0X8cc;   // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
new file mode 100644
index 000000000000..57faea76d1b3
--- /dev/null
+++ b/include/asm-arm/arch-l7200/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-arm/arch-l7200/pmu.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   Power Management Unit (PMU).
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
+#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+     unsigned int CURRENT;  /* Current configuration register */
+     unsigned int NEXT;     /* Next configuration register */
+     unsigned int reserved;
+     unsigned int RUN;      /* Run configuration register */
+     unsigned int COMM;     /* Configuration command register */
+     unsigned int SDRAM;    /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
+#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
+#define GET_FASTBUS(reg)  (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
+#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
+#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL   1<<25
+#define CHANGE_NOSTALL   2<<25
+#define CHANGE_STALL     3<<25
+
+#define INTRET           1<<17
+#define OSCEN            1<<16
+#define OSCMUX           1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0         0<<9         /*  3.6864 MHz */
+#define PLLMUL_1         1<<9         /*  ?????? MHz */
+#define PLLMUL_5         5<<9         /*  18.432 MHz */
+#define PLLMUL_10       10<<9         /*  36.864 MHz */
+#define PLLMUL_18       18<<9         /*  ?????? MHz */
+#define PLLMUL_20       20<<9         /*  73.728 MHz */
+#define PLLMUL_32       32<<9         /*  ?????? MHz */
+#define PLLMUL_35       35<<9         /* 129.024 MHz */
+#define PLLMUL_36       36<<9         /*  ?????? MHz */
+#define PLLMUL_39       39<<9         /*  ?????? MHz */
+#define PLLMUL_40       40<<9         /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1        1<<18
+#define CRCLOCK_2        2<<18
+#define CRCLOCK_4        4<<18
+#define CRCLOCK_8        8<<18
+#define CRCLOCK_16      16<<18
+#define CRCLOCK_32      32<<18
+#define CRCLOCK_63      63<<18
+#define CRCLOCK_127    127<<18
+
+#define PLLEN            1<<8
+#define PLLMUX           1<<7
+#define SDR_STOP         1<<6
+#define SYSCLKEN         1<<5
+
+#define BCLK_DIV_4       2<<3
+#define BCLK_DIV_2       1<<3
+#define BCLK_DIV_1       0<<3
+
+#define SDRB_SEL         1<<2
+#define SDRF_SEL         1<<1
+#define FASTBUS          1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK        1<<1  /* Read-only */
+#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK       1<<3  /* Read-only */
+#define PICEN            1<<4  /* Enable Co-procesor */
+#define PICTEST          1<<5
+
+#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
new file mode 100644
index 000000000000..defb8b7fca73
--- /dev/null
+++ b/include/asm-arm/arch-l7200/serial.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-arm/arch-l7200/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
new file mode 100644
index 000000000000..238c595d97ea
--- /dev/null
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * linux/include/asm-arm/arch-l7200/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-09-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <asm/arch/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE	(IO_BASE + 0x00044000)
+#define UART2_BASE	(IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR			0x00	/* Tx/Rx data */
+#define RXSTAT			0x04	/* Rx status */
+#define H_UBRLCR		0x08	/* mode register high */
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
+#define UARTCON			0x14	/* control register */
+#define UARTFLG			0x18	/* flag register */
+#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
+#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110			0x827
+#define BR_1200			0x06e
+#define BR_2400			0x05f
+#define BR_4800			0x02f
+#define BR_9600			0x017
+#define BR_14400		0x00f
+#define BR_19200		0x00b
+#define BR_38400		0x005
+#define BR_57600		0x003
+#define BR_76800 		0x002
+#define BR_115200		0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR		0x00	/* No error */
+#define RXSTAT_FRM_ERR		0x01	/* Framing error */
+#define RXSTAT_PAR_ERR		0x02	/* Parity error */
+#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK		0x01	/* generate break on tx */
+#define UBRLCR_PEN		0x02	/* enable parity */
+#define UBRLCR_PDIS		0x00	/* disable parity */
+#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
+#define UBRLCR_FIFO		0x10	/* enable FIFO */
+#define UBRLCR_LEN5		0x60	/* word length5 */
+#define UBRLCR_LEN6		0x40	/* word length6 */
+#define UBRLCR_LEN7		0x20	/* word length7 */
+#define UBRLCR_LEN8		0x00	/* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN		0x01	/* Enable UART */
+#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
+#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
+#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
+#define UARTFLG_DCD		0x04	/* Data carrier detect */
+#define UARTFLG_DSR		0x02	/* Data set ready */
+#define UARTFLG_CTS		0x01	/* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT		0x01	/* TX interrupt */
+#define UART_RXINT		0x02	/* RX interrupt */
+#define UART_RXERRINT		0x04	/* RX error interrupt */
+#define UART_MSINT		0x08	/* Modem Status interrupt */
+#define UART_UDINT		0x10	/* UART Disabled interrupt */
+#define UART_ALLIRQS		0x1f	/* All interrupts */
+
+#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
new file mode 100644
index 000000000000..bf4364ee2535
--- /dev/null
+++ b/include/asm-arm/arch-l7200/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-arm/arch-l7200/sib.h
+ *
+ *  Registers and helper functions for the Serial Interface Bus.
+ *
+ *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
+     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
+     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
+     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
+     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
+     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
+     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ   9216000  /* Hertz */
+#define AUDIO_FREQ         5000  /* Hertz */
+#define TELECOM_FREQ       5000  /* Hertz */
+
+#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57      AUDIO_DIVIDE
+#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
+#define MCCR_MCE        (1 << 16)             /* SIB enable */
+#define MCCR_ECS        (1 << 17)             /* External Clock Select */
+#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
+#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
+#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
+#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW               (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE   GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE      GET_CRC
+#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
new file mode 100644
index 000000000000..771c774f4815
--- /dev/null
+++ b/include/asm-arm/arch-l7200/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-arm/arch-l7200/sys-clock.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   System clocks.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+     unsigned int ENABLE;
+     unsigned int ESYNC;
+     unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN          1<<0
+#define B18M_EN         1<<1
+#define CLK3M6_EN       1<<2
+#define BUART_EN        1<<3
+#define CLK18MU_EN      1<<4
+#define FIR_EN          1<<5
+#define MIRN_EN         1<<6
+#define UARTM_EN        1<<7
+#define SIBADC_EN       1<<8
+#define ALTD_EN         1<<9
+#define CLCLK_EN        1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV      1<<0
+#define MIR_SEL         1<<1
+#define SSP_SEL         1<<4
+#define MM_DIV          1<<5
+#define MM_SEL          1<<6
+#define ADC_SEL_2       0<<7
+#define ADC_SEL_4       1<<7
+#define ADC_SEL_8       3<<7
+#define ADC_SEL_16      7<<7
+#define ADC_SEL_32      0x0f<<7
+#define ADC_SEL_64      0x1f<<7
+#define ADC_SEL_128     0x3f<<7
+#define ALTD_SEL        1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
new file mode 100644
index 000000000000..cb4ff29059b8
--- /dev/null
+++ b/include/asm-arm/arch-l7200/system.h
@@ -0,0 +1,27 @@
+/*
+ * linux/include/asm-arm/arch-l7200/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
new file mode 100644
index 000000000000..7b98b533e63a
--- /dev/null
+++ b/include/asm-arm/arch-l7200/time.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/asm-arm/arch-l7200/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <asm/arch/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
new file mode 100644
index 000000000000..3c3202620f00
--- /dev/null
+++ b/include/asm-arm/arch-l7200/timex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-arm/arch-l7200/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
new file mode 100644
index 000000000000..1caa2b560f53
--- /dev/null
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/asm-arm/arch-l7200/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded buad rate
+ */
+
+#include <asm/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static __inline__ void putc(char c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+		__raw_readb(IO_UART + 0x18) & 0x08);
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static void putstr(const char *s)
+{
+	while (*s) {
+		if (*s == 10) {			/* If a LF, add CR */
+			putc(10);
+			putc(13);
+		}
+		putc(*(s++));
+	}
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
new file mode 100644
index 000000000000..edeaebe1f14a
--- /dev/null
+++ b/include/asm-arm/arch-l7200/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-l7200/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h
new file mode 100644
index 000000000000..52c1cb9c39c6
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/constants.h
@@ -0,0 +1,88 @@
+/* include/asm-arm/arch-lh7a40x/constants.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CONSTANTS_H
+#define __ASM_ARCH_CONSTANTS_H
+
+#include <linux/config.h>
+
+/* Addressing constants */
+
+	/* SoC CPU IO addressing */
+#define IO_PHYS			(0x80000000)
+#define IO_VIRT			(0xf8000000)
+#define IO_SIZE			(0x0000B000)
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_PHYS		(0x20000000)
+# define CPLD_VIRT		(0xf2000000)
+# define CPLD_SIZE		PAGE_SIZE
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define IOBARRIER_PHYS		0xc0000000 /* Start of SDRAM */
+/*# define IOBARRIER_PHYS		0x00000000 */ /* Start of flash */
+# define IOBARRIER_VIRT		0xf0000000
+# define IOBARRIER_SIZE		PAGE_SIZE
+
+# define CF_PHYS		0x60200000
+# define CF_VIRT		0xf6020000
+# define CF_SIZE		(8*1024)
+
+	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
+# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
+# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
+# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
+# define CPLD00_VIRT		CPLDX_VIRT (0x00)
+# define CPLD00_SIZE		PAGE_SIZE
+# define CPLD02_PHYS		CPLDX_PHYS (0x02)
+# define CPLD02_VIRT		CPLDX_VIRT (0x02)
+# define CPLD02_SIZE		PAGE_SIZE
+# define CPLD06_PHYS		CPLDX_PHYS (0x06)
+# define CPLD06_VIRT		CPLDX_VIRT (0x06)
+# define CPLD06_SIZE		PAGE_SIZE
+# define CPLD08_PHYS		CPLDX_PHYS (0x08)
+# define CPLD08_VIRT		CPLDX_VIRT (0x08)
+# define CPLD08_SIZE		PAGE_SIZE
+# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
+# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
+# define CPLD0C_SIZE		PAGE_SIZE
+# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
+# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
+# define CPLD0E_SIZE		PAGE_SIZE
+# define CPLD10_PHYS		CPLDX_PHYS (0x10)
+# define CPLD10_VIRT		CPLDX_VIRT (0x10)
+# define CPLD10_SIZE		PAGE_SIZE
+# define CPLD12_PHYS		CPLDX_PHYS (0x12)
+# define CPLD12_VIRT		CPLDX_VIRT (0x12)
+# define CPLD12_SIZE		PAGE_SIZE
+# define CPLD14_PHYS		CPLDX_PHYS (0x14)
+# define CPLD14_VIRT		CPLDX_VIRT (0x14)
+# define CPLD14_SIZE		PAGE_SIZE
+# define CPLD16_PHYS		CPLDX_PHYS (0x16)
+# define CPLD16_VIRT		CPLDX_VIRT (0x16)
+# define CPLD16_SIZE		PAGE_SIZE
+# define CPLD18_PHYS		CPLDX_PHYS (0x18)
+# define CPLD18_VIRT		CPLDX_VIRT (0x18)
+# define CPLD18_SIZE		PAGE_SIZE
+# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
+# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
+# define CPLD1A_SIZE		PAGE_SIZE
+#endif
+
+	/* Timing constants */
+
+#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
+#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
+#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
+
+#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S
new file mode 100644
index 000000000000..421dcd6a8506
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/debug-macro.S
@@ -0,0 +1,39 @@
+/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+	@ It is not known if this will be appropriate for every 40x
+	@ board.
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1                 @ MMU enabled?
+		mov     \rx, #0x00000700        @ offset from base
+		orreq   \rx, \rx, #0x80000000   @ physical base
+		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.endm
+
+		.macro  senduart,rd,rx
+		strb    \rd, [\rx]              @ DATA
+		.endm
+
+		.macro  busyuart,rd,rx          @ spin while busy
+1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
+		bne     1001b                   @ yes, spin
+		.endm
+
+		.macro  waituart,rd,rx          @ wait for Tx FIFO room
+1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
+		bne     1001b                   @ yes, spin
+		.endm
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
new file mode 100644
index 000000000000..5797f01e1844
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/dma.h
@@ -0,0 +1,17 @@
+/* include/asm-arm/arch-lh7a40x/dma.h
+ *
+ *  Copyright (C) 2003 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+#define MAX_DMA_CHANNELS	0 /* All DMA is internal to CPU */
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
new file mode 100644
index 000000000000..865f396aa63c
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/entry-macro.S
@@ -0,0 +1,67 @@
+/*
+ * include/asm-arm/arch-lh7a40x/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+# if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+#  error "LH7A400 and LH7A404 are mutually exclusive"
+# endif
+
+# if defined (CONFIG_ARCH_LH7A400)
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+1009:
+               .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+1009:
+               .endm
+#endif
+
+
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
new file mode 100644
index 000000000000..aeb07c162e25
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/hardware.h
@@ -0,0 +1,58 @@
+/* include/asm-arm/arch-lh7a40x/hardware.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#else
+
+# if 0
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x)	__REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x)	__REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y)	\
+	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#endif
+
+#include "registers.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
new file mode 100644
index 000000000000..c13bdd9add92
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/io.h
@@ -0,0 +1,21 @@
+/* include/asm-arm/arch-lh7a40x/io.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-lh7a40x/irq.h b/include/asm-arm/arch-lh7a40x/irq.h
new file mode 100644
index 000000000000..0f5f0b10f6ca
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/irq.h
@@ -0,0 +1,11 @@
+/* include/asm-arm/arch-lh7a40x/irq.h
+ *
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+void __init lh7a40x_init_board_irq (void);
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
new file mode 100644
index 000000000000..f91f3e59f3ab
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/irqs.h
@@ -0,0 +1,196 @@
+/* include/asm-arm/arch-lh7a40x/irqs.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board.  For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <linux/config.h>
+
+#define FIQ_START	80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+  /* FIQs */
+
+# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT	1	/* Battery Low */
+# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
+# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
+
+  /* IRQs */
+
+# define IRQ_CSINT	4	/* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI	8	/* Timer 1 underflow */
+# define IRQ_T2UI	9	/* Timer 2 underflow */
+# define IRQ_RTCMI	10
+# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR	12
+# define IRQ_UART2INTR	13
+# define IRQ_LCDINTR	14
+# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR	16
+# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
+# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
+# define IRQ_USBINTR	20
+# define IRQ_DMAINTR	21
+# define IRQ_T3UI	22	/* Timer 3 underflow */
+# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN	0	/* Brownout */
+# define IRQ_WDTINTR	1	/* Watchdog Timer */
+# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
+# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
+# define IRQ_T1UI	4	/* Timer 1 underflow */
+# define IRQ_T2UI	5	/* Timer 2 underflow */
+# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1	8
+# define IRQ_DMAM2P2	9
+# define IRQ_DMAM2P3	10
+# define IRQ_DMAM2P4	11
+# define IRQ_DMAM2P5	12
+# define IRQ_DMAM2P6	13
+# define IRQ_DMAM2P7	14
+# define IRQ_DMAM2P8	15
+# define IRQ_DMAM2P9	16
+# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1	18
+# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR	20
+# define IRQ_GPIO2INTR	21
+# define IRQ_GPIO3INTR	22
+# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
+# define IRQ_SOFT_V1_24	24
+# define IRQ_SOFT_V1_25	25
+# define IRQ_SOFT_V1_26	26
+# define IRQ_SOFT_V1_27	27
+# define IRQ_SOFT_V1_28	28
+# define IRQ_SOFT_V1_29	29
+# define IRQ_SOFT_V1_30	30
+# define IRQ_SOFT_V1_31	31
+
+# define IRQ_BLINT	32	/* Battery Low */
+# define IRQ_BMIINTR	33	/* Battery Monitor */
+# define IRQ_MCINTR	34	/* Media Change */
+# define IRQ_TINTR	35	/* 64Hz Tick */
+# define IRQ_WEINT	36	/* Watchdog Expired */
+# define IRQ_RTCMI	37	/* Real-time Clock Match */
+# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR	39	/* UART1 Error */
+# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR	41	/* UART2 Error */
+# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR	43	/* UART3 Error */
+# define IRQ_SCIINTR	44	/* Smart Card */
+# define IRQ_TSCINTR	45	/* Touchscreen */
+# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR	48
+# define IRQ_GPIO6INTR	49
+# define IRQ_GPIO7INTR	50
+# define IRQ_T3UI	51	/* Timer 3 underflow */
+# define IRQ_LCDINTR	52	/* LCD Controller */
+# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
+# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
+# define IRQ_USBINTR	55	/* USB Device Port */
+# define IRQ_USHINTR	56	/* USB Host Port */
+# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
+# define IRQ_SOFT_V2_26	58
+# define IRQ_SOFT_V2_27	59
+# define IRQ_SOFT_V2_28	60
+# define IRQ_SOFT_V2_29	61
+# define IRQ_SOFT_V2_30	62
+# define IRQ_SOFT_V2_31	63
+
+# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- IRQ_GPIO0INTR)
+
+			/* Vector Address constants */
+# define VA_VECTORED	0x100	/* Set for vectored interrupt */
+# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
+
+#endif
+
+  /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK 	IRQ_TINTR
+#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
+#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
+# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
+# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
+# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
+#endif
+
+  /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		5
+# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
+# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
+# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		2
+# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
+# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
+#endif
+
+#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
new file mode 100644
index 000000000000..7e2fea372663
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/memory.h
@@ -0,0 +1,94 @@
+/* include/asm-arm/arch-lh7a40x/memory.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ *
+ *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0xc0000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define NODES_SHIFT	4	/* Up to 16 nodes */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define KVADDR_TO_NID(addr) \
+  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
+   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else  /* 2 banks per node */
+#  define KVADDR_TO_NID(addr) \
+      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define PFN_TO_NID(pfn) \
+  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else  /* 2 banks per node */
+#  define PFN_TO_NID(pfn) \
+    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and return the mem_map of that node.
+ */
+# define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and return the mem_map of that node.
+ */
+# define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else  /* 2 banks per node */
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#else
+
+# define PFN_TO_NID(addr)	(0)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-lh7a40x/param.h b/include/asm-arm/arch-lh7a40x/param.h
new file mode 100644
index 000000000000..acad0bc5deba
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/param.h
@@ -0,0 +1,9 @@
+/* include/asm-arm/arch-lh7a40x/param.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
new file mode 100644
index 000000000000..2edb22e35450
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/registers.h
@@ -0,0 +1,193 @@
+/* include/asm-arm/arch-lh7a40x/registers.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/arch/constants.h>
+
+#ifndef __ASM_ARCH_REGISTERS_H
+#define __ASM_ARCH_REGISTERS_H
+
+
+	/* Physical register base addresses */
+
+#define AC97_PHYS	(0x80000000)	/* AC97 Controller */
+#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
+#define USB_PHYS	(0x80000200)	/* USB Client */
+#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
+#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
+#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
+#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
+#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
+#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
+#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
+#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
+#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
+#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
+#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
+#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
+#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
+#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
+#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
+#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
+#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
+#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
+#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
+
+	/* Physical registers of the LH7A404 */
+
+#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
+#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
+#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
+
+/*#define KBD_PHYS	(0x80000e00) */
+/*#define LCDICP_PHYS	(0x80001000) */
+
+
+	/* Clock/State Controller register */
+
+#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
+
+#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
+
+
+	/* Interrupt Controller registers */
+
+#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
+#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
+#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
+#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
+
+
+	/* Vectored Interrupted Controller registers */
+
+#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
+#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
+#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
+#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
+#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
+#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
+#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
+#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
+#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
+#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
+#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
+#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
+#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
+#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
+#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
+#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
+#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
+#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
+#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
+#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
+#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
+#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
+#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
+#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
+#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
+#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
+
+#define VIC_CNTL_ENABLE	(0x20)
+
+	/* USB Host registers (Open HCI compatible) */
+
+#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
+
+
+	/* GPIO registers */
+
+#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
+#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
+#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
+#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
+#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
+
+
+	/* Static Memory Controller registers */
+
+#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
+#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
+#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
+#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
+#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
+#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
+
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
+# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
+# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
+# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
+# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
+# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
+# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
+# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
+
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define CPLD_CONTROL		__REG8(CPLD02_PHYS)
+# define CPLD_SPI_DATA		__REG8(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL	__REG8(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM	__REG8(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS	__REG8(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE		__REG8(CPLD0E_PHYS)
+# define CPLD_FLASH		__REG8(CPLD10_PHYS)
+# define CPLD_POWER_MGMT	__REG8(CPLD12_PHYS)
+# define CPLD_REVISION		__REG8(CPLD14_PHYS)
+# define CPLD_GPIO_EXT		__REG8(CPLD16_PHYS)
+# define CPLD_GPIO_DATA		__REG8(CPLD18_PHYS)
+# define CPLD_GPIO_DIR		__REG8(CPLD1A_PHYS)
+#endif
+
+
+	/* Timer registers */
+
+#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
+#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
+#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
+#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
+
+#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
+#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
+#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
+#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
+
+#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
+
+#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
+#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
+#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
+#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
+
+#define TIMER_C_ENABLE		(1<<7)
+#define TIMER_C_PERIODIC	(1<<6)
+#define TIMER_C_FREERUNNING	(0)
+#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
+#define TIMER_C_508KHZ		(0x08)
+
+	/* GPIO registers */
+
+#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
+#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
+#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
+#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
+#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
+#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
+#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
+
+
+#endif  /* _ASM_ARCH_REGISTERS_H */
+
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h
new file mode 100644
index 000000000000..e1df8aa460f2
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/system.h
@@ -0,0 +1,19 @@
+/* include/asm-arm/arch-lh7a40x/system.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset (0);
+}
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h
new file mode 100644
index 000000000000..fa726b670829
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/timex.h
@@ -0,0 +1,17 @@
+/* include/asm-arm/arch-lh7a40x/timex.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/arch/constants.h>
+
+#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE		3686400
+*/
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
new file mode 100644
index 000000000000..ec8ab67122f3
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/uncompress.h
@@ -0,0 +1,43 @@
+/* include/asm-arm/arch-lh7a40x/uncompress.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/arch/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA	(0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS	(0x10)
+#endif
+#define nTxRdy  	(0x20)	/* Not TxReady (literally Tx FIFO full) */
+
+	/* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static __inline__ void putc (char ch)
+{
+	while (UART_STATUS & nTxRdy)
+		;
+	UART_DATA = ch;
+}
+
+static void putstr (const char* sz)
+{
+	for (; *sz; ++sz) {
+		putc (*sz);
+		if (*sz == '\n')
+			putc ('\r');
+	}
+}
+
+	/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h
new file mode 100644
index 000000000000..5ac607925bea
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/vmalloc.h
@@ -0,0 +1,21 @@
+/* include/asm-arm/arch-lh7a40x/vmalloc.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after
+ * the physical memory until the kernel virtual memory starts.  That
+ * means that any out-of-bounds memory accesses will hopefully be
+ * caught.  The vmalloc() routines leaves a hole of 4kB (one page)
+ * between each vmalloced area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h
new file mode 100644
index 000000000000..590bac25b7c4
--- /dev/null
+++ b/include/asm-arm/arch-omap/aic23.h
@@ -0,0 +1,112 @@
+/*
+ * linux/include/asm-arm/arch-omap/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR		0x00
+#define RIGHT_LINE_VOLUME_ADDR		0x01
+#define LEFT_CHANNEL_VOLUME_ADDR	0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
+#define ANALOG_AUDIO_CONTROL_ADDR	0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
+#define POWER_DOWN_CONTROL_ADDR		0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
+#define SAMPLE_RATE_CONTROL_ADDR	0x08
+#define DIGITAL_INTERFACE_ACT_ADDR	0x09
+#define RESET_CONTROL_ADDR		0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED			0x0100
+#define LIM_MUTED			0x0080
+#define LIV_DEFAULT			0x0017
+#define LIV_MAX				0x001f
+#define LIV_MIN				0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON				0x0080
+#define LHV_DEFAULT			0x0079
+#define LHV_MAX				0x007f
+#define LHV_MIN				0x0000
+
+// Analog audio path control register
+#define STE_ENABLED			0x0020
+#define DAC_SELECTED			0x0010
+#define BYPASS_ON			0x0008
+#define INSEL_MIC			0x0004
+#define MICM_MUTED			0x0002
+#define MICB_20DB			0x0001
+
+// Digital audio path control register
+#define DACM_MUTE			0x0008
+#define DEEMP_32K			0x0002
+#define DEEMP_44K			0x0004
+#define DEEMP_48K			0x0006
+#define ADCHP_ON			0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF	  	0x0080
+#define CLK_OFF				0x0040
+#define OSC_OFF				0x0020
+#define OUT_OFF				0x0010
+#define DAC_OFF				0x0008
+#define ADC_OFF				0x0004
+#define MIC_OFF				0x0002
+#define LINE_OFF			0x0001
+
+// Digital audio interface register
+#define MS_MASTER			0x0040
+#define LRSWAP_ON			0x0020
+#define LRP_ON				0x0010
+#define IWL_16				0x0000
+#define IWL_20				0x0004
+#define IWL_24				0x0008
+#define IWL_32				0x000C
+#define FOR_I2S				0x0002
+#define FOR_DSP				0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF			0x0080
+#define CLKIN_HALF			0x0040
+#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON			0x0001
+#define SR_MASK                         0xf
+#define CLKOUT_SHIFT                    7
+#define CLKIN_SHIFT                     6
+#define SR_SHIFT                        2
+#define BOSR_SHIFT                      1
+
+// Digital interface register
+#define ACT_ON				0x0001
+
+#define TLV320AIC23ID1                  (0x1a)	// cs low
+#define TLV320AIC23ID2                  (0x1b)	// cs high
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
new file mode 100644
index 000000000000..60f002b72983
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-h2.h
@@ -0,0 +1,47 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
+/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */
+#define OMAP_NOR_FLASH_SIZE             SZ_32M
+#define OMAP_NOR_FLASH_START1           0x0C000000 /* CS3 */
+#define OMAP_NOR_FLASH_START2           0x0A000000 /* CS2B */
+
+/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
+#define OMAP_NAND_FLASH_START1           0x0A000000 /* CS2B */
+#define OMAP_NAND_FLASH_START2           0x0C000000 /* CS3 */
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
new file mode 100644
index 000000000000..e4d1cd231731
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -0,0 +1,49 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
+/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */
+#define OMAP_NOR_FLASH_SIZE             SZ_32M
+#define OMAP_NOR_FLASH_START1 		0x0C000000 /* CS3 */
+#define OMAP_NOR_FLASH_START2 		0x0A000000 /* CS2B */
+
+/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
+#define OMAP_NAND_FLASH_START1           0x0A000000 /* CS2B */
+#define OMAP_NAND_FLASH_START2           0x0C000000 /* CS3 */
+
+#define MAXIRQNUM			(IH_BOARD_BASE)
+#define MAXFIQNUM			MAXIRQNUM
+#define MAXSWINUM			MAXIRQNUM
+
+#define NR_IRQS				(MAXIRQNUM + 1)
+
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
new file mode 100644
index 000000000000..79138dcfb4ac
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+
+#endif /*  __ASM_ARCH_OMAP_H4_H */
+
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
new file mode 100644
index 000000000000..0f1abaefe4de
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP1510)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
+
+/*
+ * These definitions define an area of FLASH set aside
+ * for the use of MTD/JFFS2. This is the area of flash
+ * that a JFFS2 filesystem will reside which is mounted
+ * at boot with the "root=/dev/mtdblock/0 rw"
+ * command line option. The flash address used here must
+ * fall within the legal range defined by rrload for storing
+ * the filesystem component. This address will be sufficiently
+ * deep into the overall flash range to avoid the other
+ * components also stored in flash such as the bootloader,
+ * the bootloader params, and the kernel.
+ * The SW2 settings for the map below are:
+ * 1 off, 2 off, 3 on, 4 off.
+ */
+
+/* Intel flash_0, partitioned as expected by rrload */
+#define OMAP_FLASH_0_BASE	0xD8000000
+#define OMAP_FLASH_0_START	0x00000000
+#define OMAP_FLASH_0_SIZE	SZ_16M
+
+/* Intel flash_1, used for cramfs or other flash file systems */
+#define OMAP_FLASH_1_BASE	0xD9000000
+#define OMAP_FLASH_1_START	0x01000000
+#define OMAP_FLASH_1_SIZE	SZ_16M
+
+#define NR_FPGA_IRQS		24
+#define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP1510 */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/include/asm-arm/arch-omap/board-netstar.h b/include/asm-arm/arch-omap/board-netstar.h
new file mode 100644
index 000000000000..77cc0fb54d54
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-netstar.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based NetStar board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_NETSTAR_H
+#define __ASM_ARCH_NETSTAR_H
+
+#include <asm/arch/tc.h>
+
+#define OMAP_NAND_FLASH_START1		OMAP_CS1_PHYS + (1 << 23)
+#define OMAP_NAND_FLASH_START2		OMAP_CS1_PHYS + (2 << 23)
+
+#endif /*  __ASM_ARCH_NETSTAR_H */
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
new file mode 100644
index 000000000000..aaa49a0fbd21
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-osk.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* Micron NOR flash at CS3 mapped to address 0x0 if BM bit is 1 */
+#define OMAP_OSK_NOR_FLASH_BASE		0xD8000000
+#define OMAP_OSK_NOR_FLASH_SIZE		SZ_32M
+#define OMAP_OSK_NOR_FLASH_START	0x00000000
+
+#endif /*  __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
new file mode 100644
index 000000000000..0c224cc74fe4
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -0,0 +1,58 @@
+/*
+ *  linux/include/asm-arm/arch-omap/board-perseus2.h
+ *
+ *  Copyright 2003 by Texas Instruments Incorporated
+ *    OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <asm/arch/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
+#endif
+
+/*
+ * These definitions define an area of FLASH set aside
+ * for the use of MTD/JFFS2. This is the area of flash
+ * that a JFFS2 filesystem will reside which is mounted
+ * at boot with the "root=/dev/mtdblock/0 rw"
+ * command line option.
+ */
+
+/* Intel flash_0, partitioned as expected by rrload */
+#define OMAP_FLASH_0_BASE	0xD8000000	/* VA */
+#define OMAP_FLASH_0_START	0x00000000	/* PA */
+#define OMAP_FLASH_0_SIZE	SZ_32M
+
+#define MAXIRQNUM		IH_BOARD_BASE
+#define MAXFIQNUM		MAXIRQNUM
+#define MAXSWINUM		MAXIRQNUM
+
+#define NR_IRQS			(MAXIRQNUM + 1)
+
+#endif
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h
new file mode 100644
index 000000000000..33977b8956fb
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-voiceblue.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+#if (EXTERNAL_MAX_NR_PORTS < 4)
+#undef EXTERNAL_MAX_NR_PORTS
+#define EXTERNAL_MAX_NR_PORTS	4
+#endif
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+extern void voiceblue_reset(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
new file mode 100644
index 000000000000..1cefd60b6f2a
--- /dev/null
+++ b/include/asm-arm/arch-omap/board.h
@@ -0,0 +1,126 @@
+/*
+ *  linux/include/asm-arm/arch-omap/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_MMC		0x4f02
+#define OMAP_TAG_UART		0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_mmc_config {
+	u8 mmc_blocks;
+	s16 mmc1_power_pin, mmc2_power_pin;
+	s16 mmc1_switch_pin, mmc2_switch_pin;
+};
+
+struct omap_uart_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+};
+
+/* Cover:
+ *      high -> closed
+ *      low  -> open
+ * Connection:
+ *      high -> connected
+ *      low  -> disconnected
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+#endif
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
new file mode 100644
index 000000000000..e8786713ee5c
--- /dev/null
+++ b/include/asm-arm/arch-omap/cpu.h
@@ -0,0 +1,183 @@
+/*
+ * linux/include/asm-arm/arch-omap/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+extern unsigned int system_rev;
+
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP
+#  define MULTI_OMAP
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP
+#  define MULTI_OMAP
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP
+#  define MULTI_OMAP
+# else
+#  define OMAP_NAME omap1610
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP
+#  define MULTI_OMAP
+# else
+#  define OMAP_NAME omap1710
+# endif
+#endif
+
+/*
+ * Generate various OMAP cpu specific macros, and cpu class
+ * specific macros
+ */
+#define GET_OMAP_TYPE	((system_rev >> 24) & 0xff)
+#define GET_OMAP_CLASS	(system_rev & 0xff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_TYPE(730, 0x07)
+IS_OMAP_TYPE(1510, 0x15)
+IS_OMAP_TYPE(1610, 0x16)
+IS_OMAP_TYPE(5912, 0x16)
+IS_OMAP_TYPE(1710, 0x17)
+IS_OMAP_TYPE(2420, 0x24)
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+
+/*
+ * Macros to group OMAP types into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap15xx():	True for 1510 and 5910
+ * cpu_is_omap16xx():	True for 1610, 5912 and 1710
+ */
+#if defined(MULTI_OMAP)
+# define cpu_is_omap7xx()		is_omap7xx()
+# define cpu_is_omap15xx()		is_omap15xx()
+# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730))
+#  define cpu_is_omap16xx()		1
+# else
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  define cpu_is_omap7xx()		1
+# else
+#  define cpu_is_omap7xx()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  define cpu_is_omap15xx()		1
+# else
+#  define cpu_is_omap15xx()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  define cpu_is_omap16xx()		1
+# else
+#  define cpu_is_omap16xx()		0
+# endif
+#endif
+
+#if defined(MULTI_OMAP)
+# define cpu_is_omap730()		is_omap730()
+# define cpu_is_omap1510()		is_omap1510()
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1710()		is_omap1710()
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  define cpu_is_omap730()		1
+# else
+#  define cpu_is_omap730()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  define cpu_is_omap1510()		1
+# else
+#  define cpu_is_omap1510()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  define cpu_is_omap1610()		1
+# else
+#  define cpu_is_omap1610()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  define cpu_is_omap5912()		1
+# else
+#  define cpu_is_omap5912()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1710()		is_omap1710()
+# else
+# define cpu_is_omap1610()		0
+# define cpu_is_omap5912()		0
+# define cpu_is_omap1710()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  define cpu_is_omap2420()		1
+# else
+#  define cpu_is_omap2420()		0
+# endif
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
new file mode 100644
index 000000000000..83bb458afd0b
--- /dev/null
+++ b/include/asm-arm/arch-omap/debug-macro.S
@@ -0,0 +1,45 @@
+/* linux/include/asm-arm/arch-omap/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
new file mode 100644
index 000000000000..d785248377db
--- /dev/null
+++ b/include/asm-arm/arch-omap/dma.h
@@ -0,0 +1,264 @@
+/*
+ *  linux/include/asm-arm/arch-omap/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS			0xffffffff
+
+#define OMAP_LOGICAL_DMA_CH_COUNT	17
+
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+
+#define OMAP_DMA_BASE			(0xfffed800)
+#define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
+#define OMAP_DMA_GSCR			(OMAP_DMA_BASE + 0x404)
+#define OMAP_DMA_GRST			(OMAP_DMA_BASE + 0x408)
+#define OMAP_DMA_HW_ID			(OMAP_DMA_BASE + 0x442)
+#define OMAP_DMA_PCH2_ID		(OMAP_DMA_BASE + 0x444)
+#define OMAP_DMA_PCH0_ID		(OMAP_DMA_BASE + 0x446)
+#define OMAP_DMA_PCH1_ID		(OMAP_DMA_BASE + 0x448)
+#define OMAP_DMA_PCHG_ID		(OMAP_DMA_BASE + 0x44a)
+#define OMAP_DMA_PCHD_ID		(OMAP_DMA_BASE + 0x44c)
+#define OMAP_DMA_CAPS_0_U		(OMAP_DMA_BASE + 0x44e)
+#define OMAP_DMA_CAPS_0_L		(OMAP_DMA_BASE + 0x450)
+#define OMAP_DMA_CAPS_1_U		(OMAP_DMA_BASE + 0x452)
+#define OMAP_DMA_CAPS_1_L		(OMAP_DMA_BASE + 0x454)
+#define OMAP_DMA_CAPS_2			(OMAP_DMA_BASE + 0x456)
+#define OMAP_DMA_CAPS_3			(OMAP_DMA_BASE + 0x458)
+#define OMAP_DMA_CAPS_4			(OMAP_DMA_BASE + 0x45a)
+#define OMAP_DMA_PCH2_SR		(OMAP_DMA_BASE + 0x460)
+#define OMAP_DMA_PCH0_SR		(OMAP_DMA_BASE + 0x480)
+#define OMAP_DMA_PCH1_SR		(OMAP_DMA_BASE + 0x482)
+#define OMAP_DMA_PCHD_SR		(OMAP_DMA_BASE + 0x4c0)
+
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP      	(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+
+/* Every LCh has its own set of the registers below */
+#define OMAP_DMA_CSDP(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
+#define OMAP_DMA_CCR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
+#define OMAP_DMA_CICR(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
+#define OMAP_DMA_CSR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
+#define OMAP_DMA_CSSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
+#define OMAP_DMA_CSSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
+#define OMAP_DMA_CDSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
+#define OMAP_DMA_CDSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
+#define OMAP_DMA_CEN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
+#define OMAP_DMA_CFN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
+#define OMAP_DMA_CSFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
+#define OMAP_DMA_CSEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
+#define OMAP_DMA_CSAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
+#define OMAP_DMA_CDAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
+#define OMAP_DMA_CDEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
+#define OMAP_DMA_CDFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
+#define OMAP_DMA_COLOR_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
+#define OMAP_DMA_COLOR_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
+#define OMAP_DMA_CCR2(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
+#define OMAP_DMA_CLNK_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
+#define OMAP_DMA_LCH_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+
+#define OMAP_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP_DMA_SYNC_IRQ		(1 << 6)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+extern void omap_set_dma_priority(int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			    void (* callback)(int lch, u16 ch_status, void *data),
+			    void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_dma_link_lch (int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
+
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+extern int omap_dma_in_1510_mode(void);
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
new file mode 100644
index 000000000000..57b126889b98
--- /dev/null
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-omap/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
new file mode 100644
index 000000000000..676807dc50e1
--- /dev/null
+++ b/include/asm-arm/arch-omap/fpga.h
@@ -0,0 +1,196 @@
+/*
+ * linux/include/asm-arm/arch-omap/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()	(0)
+#endif
+
+#define fpga_read(reg)			__raw_readb(reg)
+#define fpga_write(val, reg)		__raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
+#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
+#define OMAP1510_FPGA_SIZE			SZ_4K
+#define OMAP1510_FPGA_START			0x08000000	/* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_IH_FPGA_BASE		IH_BOARD_BASE
+#define OMAP1510_INT_FPGA_ATN		(OMAP1510_IH_FPGA_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP1510_IH_FPGA_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP1510_IH_FPGA_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP1510_IH_FPGA_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP1510_IH_FPGA_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP1510_IH_FPGA_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP1510_IH_FPGA_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP1510_IH_FPGA_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP1510_IH_FPGA_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP1510_IH_FPGA_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP1510_IH_FPGA_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP1510_IH_FPGA_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP1510_IH_FPGA_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP1510_IH_FPGA_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP1510_IH_FPGA_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP1510_IH_FPGA_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP1510_IH_FPGA_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP1510_IH_FPGA_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP1510_IH_FPGA_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP1510_IH_FPGA_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP1510_IH_FPGA_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP1510_IH_FPGA_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP1510_IH_FPGA_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP1510_IH_FPGA_BASE + 23)
+
+#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
new file mode 100644
index 000000000000..fad2fc93ee70
--- /dev/null
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -0,0 +1,69 @@
+/*
+ * linux/include/asm-arm/arch-omap/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + ((nr) & 0x3f))
+
+/* For EDGECTRL */
+#define OMAP_GPIO_NO_EDGE	  0x00
+#define OMAP_GPIO_FALLING_EDGE	  0x01
+#define OMAP_GPIO_RISING_EDGE	  0x02
+#define OMAP_GPIO_BOTH_EDGES	  0x03
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_edge_ctrl(int gpio, int edge);
+
+#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
new file mode 100644
index 000000000000..37e06c782bdf
--- /dev/null
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -0,0 +1,324 @@
+/*
+ * linux/include/asm-arm/arch-omap/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <linux/config.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <asm/arch/cpu.h>
+#endif
+#include <asm/arch/io.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Serial ports
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_UART1_BASE		(unsigned char *)0xfffb0000
+#define OMAP_UART2_BASE		(unsigned char *)0xfffb0800
+#define OMAP_UART3_BASE		(unsigned char *)0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP730
+#include "omap730.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+#include "omap1510.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+#include "omap16xx.h"
+#endif
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#error "Support for H4 board not yet implemented."
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_NETSTAR
+#include "board-netstar.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
new file mode 100644
index 000000000000..1c8c9fcc766e
--- /dev/null
+++ b/include/asm-arm/arch-omap/io.h
@@ -0,0 +1,107 @@
+/*
+ * linux/include/asm-arm/arch-omap/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from linux/include/asm-arm/arch-sa1100/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+#define IO_PHYS			0xFFFB0000
+#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_VIRT			(IO_PHYS - IO_OFFSET)
+#define IO_SIZE			0x40000
+#define IO_ADDRESS(x)		((x) - IO_OFFSET)
+
+#define PCIO_BASE		0
+
+#define io_p2v(x)               ((x) - IO_OFFSET)
+#define io_v2p(x)               ((x) + IO_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+/* 16 bit uses LDRH/STRH, base +/- offset_8 */
+typedef struct { volatile u16 offset[256]; } __regbase16;
+#define __REGV16(vaddr)		((__regbase16 *)((vaddr)&~0xff)) \
+					->offset[((vaddr)&0xff)>>1]
+#define __REG16(paddr)          __REGV16(io_p2v(paddr))
+
+/* 8/32 bit uses LDR/STR, base +/- offset_12 */
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+#define __REGV8(vaddr)		((__regbase8  *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>0]
+#define __REG8(paddr)		__REGV8(io_p2v(paddr))
+
+typedef struct { volatile u32 offset[4096]; } __regbase32;
+#define __REGV32(vaddr)		((__regbase32 *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>2]
+#define __REG32(paddr)		__REGV32(io_p2v(paddr))
+
+#else
+
+#define __REG8(paddr)		io_p2v(paddr)
+#define __REG16(paddr)		io_p2v(paddr)
+#define __REG32(paddr)		io_p2v(paddr)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
new file mode 100644
index 000000000000..6701fd9e5f9b
--- /dev/null
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -0,0 +1,255 @@
+/*
+ *  linux/include/asm-arm/arch-omap/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP1510_IRQS_H
+#define __ASM_ARCH_OMAP1510_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_IH2_IRQ		0
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_DSP_MAILBOX1	10
+#define INT_DSP_MAILBOX2	11
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ		0
+#define INT_730_IH2_IRQ		1
+#define INT_730_USB_NON_ISO	2
+#define INT_730_USB_ISO		3
+#define INT_730_ICR		4
+#define INT_730_EAC		5
+#define INT_730_GPIO_BANK1	6
+#define INT_730_GPIO_BANK2	7
+#define INT_730_GPIO_BANK3	8
+#define INT_730_McBSP2TX	10
+#define INT_730_McBSP2RX	11
+#define INT_730_McBSP2RX_OVF	12
+#define INT_730_LCD_LINE	14
+#define INT_730_GSM_PROTECT	15
+#define INT_730_TIMER3		16
+#define INT_730_GPIO_BANK5	17
+#define INT_730_GPIO_BANK6	18
+#define INT_730_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+#define INT_DSP_MMU		(28 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS	(0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_730_CFCD		(2 + IH2_BASE)
+#define INT_730_CFIREQ		(3 + IH2_BASE)
+#define INT_730_I2C		(4 + IH2_BASE)
+#define INT_730_PCC		(5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_730_SPI_100K_1	(7 + IH2_BASE)
+#define INT_730_SYREN_SPI	(8 + IH2_BASE)
+#define INT_730_VLYNQ		(9 + IH2_BASE)
+#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_730_McBSP1TX	(11 + IH2_BASE)
+#define INT_730_McBSP1RX	(12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_730_MCSI		(16 + IH2_BASE)
+#define INT_730_uWireTX		(17 + IH2_BASE)
+#define INT_730_uWireRX		(18 + IH2_BASE)
+#define INT_730_SMC_CD		(19 + IH2_BASE)
+#define INT_730_SMC_IREQ	(20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_730_TIMER32K	(22 + IH2_BASE)
+#define INT_730_MMC_SDIO	(23 + IH2_BASE)
+#define INT_730_UPLD		(24 + IH2_BASE)
+#define INT_730_USB_HHC_1	(27 + IH2_BASE)
+#define INT_730_USB_HHC_2	(28 + IH2_BASE)
+#define INT_730_USB_GENI	(29 + IH2_BASE)
+#define INT_730_USB_OTG		(30 + IH2_BASE)
+#define INT_730_CAMERA_IF	(31 + IH2_BASE)
+#define INT_730_RNG		(32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_730_SHA1_MD5	(36 + IH2_BASE)
+#define INT_730_SPI_100K_2	(37 + IH2_BASE)
+#define INT_730_RNG_IDLE	(38 + IH2_BASE)
+#define INT_730_MPUIO		(39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_730_DMA_CH6		(53 + IH2_BASE)
+#define INT_730_DMA_CH7		(54 + IH2_BASE)
+#define INT_730_DMA_CH8		(55 + IH2_BASE)
+#define INT_730_DMA_CH9		(56 + IH2_BASE)
+#define INT_730_DMA_CH10	(57 + IH2_BASE)
+#define INT_730_DMA_CH11	(58 + IH2_BASE)
+#define INT_730_DMA_CH12	(59 + IH2_BASE)
+#define INT_730_DMA_CH13	(60 + IH2_BASE)
+#define INT_730_DMA_CH14	(61 + IH2_BASE)
+#define INT_730_DMA_CH15	(62 + IH2_BASE)
+#define INT_730_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define IH_BOARD_BASE		(16 + IH_MPUIO_BASE)
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+/*
+ * The definition of NR_IRQS is in board-specific header file, which is
+ * included via hardware.h
+ */
+#include <asm/arch/hardware.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS                 IH_BOARD_BASE
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
new file mode 100644
index 000000000000..305bdeb16ab8
--- /dev/null
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -0,0 +1,257 @@
+/*
+ * linux/include/asm-arm/arch-omap/gpio.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <asm/arch/hardware.h>
+
+#define OMAP730_MCBSP1_BASE	0xfffb1000
+#define OMAP730_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x02
+#define OMAP_MCBSP_REG_DXR2	0x04
+#define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_SPCR2	0x08
+#define OMAP_MCBSP_REG_SPCR1	0x0a
+#define OMAP_MCBSP_REG_RCR2	0x0c
+#define OMAP_MCBSP_REG_RCR1	0x0e
+#define OMAP_MCBSP_REG_XCR2	0x10
+#define OMAP_MCBSP_REG_XCR1	0x12
+#define OMAP_MCBSP_REG_SRGR2	0x14
+#define OMAP_MCBSP_REG_SRGR1	0x16
+#define OMAP_MCBSP_REG_MCR2	0x18
+#define OMAP_MCBSP_REG_MCR1	0x1a
+#define OMAP_MCBSP_REG_RCERA	0x1c
+#define OMAP_MCBSP_REG_RCERB	0x1e
+#define OMAP_MCBSP_REG_XCERA	0x20
+#define OMAP_MCBSP_REG_XCERB	0x22
+#define OMAP_MCBSP_REG_PCR0	0x24
+#define OMAP_MCBSP_REG_RCERC	0x26
+#define OMAP_MCBSP_REG_RCERD	0x28
+#define OMAP_MCBSP_REG_XCERC	0x2A
+#define OMAP_MCBSP_REG_XCERD	0x2C
+#define OMAP_MCBSP_REG_RCERE	0x2E
+#define OMAP_MCBSP_REG_RCERF	0x30
+#define OMAP_MCBSP_REG_XCERE	0x32
+#define OMAP_MCBSP_REG_XCERF	0x34
+#define OMAP_MCBSP_REG_RCERG	0x36
+#define OMAP_MCBSP_REG_RCERH	0x38
+#define OMAP_MCBSP_REG_XCERG	0x3A
+#define OMAP_MCBSP_REG_XCERH	0x3C
+
+#define OMAP_MAX_MCBSP_COUNT 3
+
+#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST			0x0001
+#define RRDY			0x0002
+#define RFULL			0x0004
+#define RSYNC_ERR		0x0008
+#define RINTM(value)		((value)<<4)	/* bits 4:5 */
+#define ABIS			0x0040
+#define DXENA			0x0080
+#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
+#define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define DLB			0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST		0x0001
+#define XRDY		0x0002
+#define XEMPTY		0x0004
+#define XSYNC_ERR	0x0008
+#define XINTM(value)	((value)<<4)		/* bits 4:5 */
+#define GRST		0x0040
+#define FRST		0x0080
+#define SOFT		0x0100
+#define FREE		0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP		0x0001
+#define CLKXP		0x0002
+#define FSRP		0x0004
+#define FSXP		0x0008
+#define DR_STAT		0x0010
+#define DX_STAT		0x0020
+#define CLKS_STAT	0x0040
+#define SCLKME		0x0080
+#define CLKRM		0x0100
+#define CLKXM		0x0200
+#define FSRM		0x0400
+#define FSXM		0x0800
+#define RIOEN		0x1000
+#define XIOEN		0x2000
+#define IDLE_EN		0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)		(value)		/* Bits 0:1 */
+#define RFIG			0x0004
+#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define RPHASE			0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)		(value)		/* Bits 0:1 */
+#define XFIG			0x0004
+#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define XPHASE			0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)		(value)		/* Bits 0:7 */
+#define FWID(value)		((value)<<8)	/* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)		(value)		/* Bits 0:11 */
+#define FSGM			0x1000
+#define CLKSM			0x2000
+#define CLKSP			0x4000
+#define GSYNC			0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM			0x0001
+#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)		(value)		/* Bits 0:1 */
+#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+	u16 spcr2;
+	u16 spcr1;
+	u16 rcr2;
+	u16 rcr1;
+	u16 xcr2;
+	u16 xcr1;
+	u16 srgr2;
+	u16 srgr1;
+	u16 mcr2;
+	u16 mcr1;
+	u16 pcr0;
+	u16 rcerc;
+	u16 rcerd;
+	u16 xcerc;
+	u16 xcerd;
+	u16 rcere;
+	u16 rcerf;
+	u16 xcere;
+	u16 xcerf;
+	u16 rcerg;
+	u16 rcerh;
+	u16 xcerg;
+	u16 xcerh;
+};
+
+typedef enum {
+	OMAP_MCBSP1 = 0,
+	OMAP_MCBSP2,
+	OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+	OMAP_MCBSP_CLK_RISING = 0,
+	OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+	OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+	OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+	OMAP_MCBSP_SPI_MASTER = 0,
+	OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+	omap_mcbsp_spi_mode		spi_mode;
+	omap_mcbsp_clk_polarity		rx_clock_polarity;
+	omap_mcbsp_clk_polarity		tx_clock_polarity;
+	omap_mcbsp_fs_polarity		fsx_polarity;
+	u8				clk_div;
+	omap_mcbsp_clk_stp_mode		clk_stp_mode;
+	omap_mcbsp_word_length		word_length;
+};
+
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
new file mode 100644
index 000000000000..f6b57dd846a3
--- /dev/null
+++ b/include/asm-arm/arch-omap/memory.h
@@ -0,0 +1,87 @@
+/*
+ * linux/include/asm-arm/arch-omap/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x10000000UL)
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	(0x30000000UL)
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *	 on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP1510
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
+					(dma_addr_t)virt_to_lbus(page_address(page)) : \
+					(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
+					lbus_to_virt(addr) : \
+					__bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
+					virt_to_lbus(addr) : \
+					__virt_to_bus(addr);})
+
+#endif	/* CONFIG_ARCH_OMAP1510 */
+
+#define PHYS_TO_NID(addr) (0)
+#endif
+
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
new file mode 100644
index 000000000000..39f99decbb7b
--- /dev/null
+++ b/include/asm-arm/arch-omap/mux.h
@@ -0,0 +1,561 @@
+/*
+ * linux/include/asm-arm/arch-omap/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ *
+ * Change log:
+ *   Added entry for the I2C interface. (02Feb 2004)
+ *   Copyright (C) 2004 Texas Instruments
+ *
+ *   Added entry for the keypad and uwire CS1. (09Mar 2004)
+ *   Copyright (C) 2004 Texas Instruments
+ *
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+#define PULL_DISABLED	0
+#define PULL_ENABLED	1
+
+#define PULL_DOWN	0
+#define PULL_UP		1
+
+typedef struct {
+	char *name;
+	unsigned char busy;
+	unsigned char debug;
+
+	const char *mux_reg_name;
+	const unsigned int mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+} reg_cfg_set;
+
+/*
+ * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
+ * device. See also reg_cfg_table below for the register values.
+ */
+typedef enum {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP-1610 GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS0,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* UART1 1610 */
+
+	R13_1610_UART1_TX,
+	V14_1610_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+} reg_cfg_t;
+
+#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
+
+/*
+ * Table of various FUNC_MUX and PULL_DWN combinations for each device.
+ * See also reg_cfg_t above for the lookup table.
+ */
+static reg_cfg_set __initdata_or_module
+reg_cfg_table[] = {
+/*
+ *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
+ *				reg  offset mode reg  bit   ena	  reg
+ */
+MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
+
+/* UART2 (COM_UART_GATING), conflicts with USB2 */
+MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
+
+/* UART3 (GIGA_UART_GATING) */
+MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
+MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+
+/* USB internal master generic */
+MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
+MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
+/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
+MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
+MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
+MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
+
+/* USB1 master */
+MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
+
+/* USB2 master */
+MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
+
+/* OMAP-1510 GPIO */
+MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
+MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
+MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
+MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
+MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
+MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
+MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
+
+/* MPUIO */
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,   1,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
+
+MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
+MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
+MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
+MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
+MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
+
+/* MCBSP2 */
+MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
+
+/* MCBSP3 NOTE: Mode must 1 for clock */
+MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
+
+/* Misc ballouts */
+MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+
+/* OMAP-1610 MMC2 */
+MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
+MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
+MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
+MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
+MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
+MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
+MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
+MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
+
+/* OMAP-1610 External Trace Interface */
+MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
+MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
+MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
+MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
+MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
+MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
+
+/* OMAP-1610 GPIO */
+MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
+MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
+MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
+MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
+MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+
+/* OMAP-1610 uWire */
+MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
+MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
+MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
+MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
+MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
+MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
+
+/* OMAP-1610 USB0 alternate configuration */
+MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
+MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
+MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
+MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
+MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
+MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
+MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
+MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
+
+/* USB2 interface */
+MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R8_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
+
+
+/* UART1 */
+MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
+MUX_CFG("V14_1610_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
+MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+
+/* I2C interface */
+MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
+MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
+
+/* Keypad */
+MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
+MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
+MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
+MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
+MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
+MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
+MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
+MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
+MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
+MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
+MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
+
+/* Power management */
+MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
+MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
+MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
+MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
+MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+};
+
+#endif	/* __MUX_C__ */
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
new file mode 100644
index 000000000000..f491a48ef2e1
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap1510.h
@@ -0,0 +1,61 @@
+/* linux/include/asm-arm/arch-omap/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP1510_H
+#define __ASM_ARCH_OMAP1510_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_SRAM_BASE	0xD0000000
+#define OMAP1510_SRAM_SIZE	(SZ_128K + SZ_64K)
+#define OMAP1510_SRAM_START	0x20000000
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * Memory used by power management
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1510_SRAM_IDLE_SUSPEND	(OMAP1510_SRAM_BASE + OMAP1510_SRAM_SIZE - 0x200)
+#define OMAP1510_SRAM_API_SUSPEND	(OMAP1510_SRAM_IDLE_SUSPEND + 0x100)
+
+#endif /*  __ASM_ARCH_OMAP1510_H */
+
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
new file mode 100644
index 000000000000..88b1fe43ae9e
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap16xx.h
@@ -0,0 +1,187 @@
+/* linux/include/asm-arm/arch-omap/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_SRAM_BASE	0xD0000000
+#define OMAP1610_SRAM_SIZE	(SZ_16K)
+#define OMAP5912_SRAM_SIZE	0x3E800
+#define OMAP16XX_SRAM_START	0x20000000
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * Memory used by power management
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1610_SRAM_IDLE_SUSPEND	(OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
+#define OMAP1610_SRAM_API_SUSPEND	(OMAP1610_SRAM_IDLE_SUSPEND + 0x100)
+#define OMAP5912_SRAM_IDLE_SUSPEND	(OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200)
+#define OMAP5912_SRAM_API_SUSPEND	(OMAP5912_SRAM_IDLE_SUSPEND + 0x100)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR               (OMAP_UART3_BASE + 0)
+#define UART3_THR               (OMAP_UART3_BASE + 0)
+#define UART3_DLL               (OMAP_UART3_BASE + 0)
+#define UART3_IER               (OMAP_UART3_BASE + 4)
+#define UART3_DLH               (OMAP_UART3_BASE + 4)
+#define UART3_IIR               (OMAP_UART3_BASE + 8)
+#define UART3_FCR               (OMAP_UART3_BASE + 8)
+#define UART3_EFR               (OMAP_UART3_BASE + 8)
+#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_PWL_BASE	(0xfffb5800)
+#define OMAP16XX_PWL_ENABLE	(OMAP16XX_PWL_BASE + 0x00)
+#define OMAP16XX_PWL_CLK_ENABLE	(OMAP16XX_PWL_BASE + 0x04)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h
new file mode 100644
index 000000000000..599ab00f5488
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap730.h
@@ -0,0 +1,106 @@
+/* linux/include/asm-arm/arch-omap/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_SRAM_BASE	0xD0000000
+#define OMAP730_SRAM_SIZE	(SZ_128K + SZ_64K + SZ_8K)
+#define OMAP730_SRAM_START	0x20000000
+
+#define OMAP730_DSP_BASE	0xE0000000
+#define OMAP730_DSP_SIZE	0x50000
+#define OMAP730_DSP_START	0xE0000000
+
+#define OMAP730_DSPREG_BASE	0xE1000000
+#define OMAP730_DSPREG_SIZE	SZ_128K
+#define OMAP730_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE	0xfffe1000
+#define OMAP730_IO_CONF_0	0xfffe1070
+#define OMAP730_IO_CONF_1	0xfffe1074
+#define OMAP730_IO_CONF_2	0xfffe1078
+#define OMAP730_IO_CONF_3	0xfffe107c
+#define OMAP730_IO_CONF_4	0xfffe1080
+#define OMAP730_IO_CONF_5	0xfffe1084
+#define OMAP730_IO_CONF_6	0xfffe1088
+#define OMAP730_IO_CONF_7	0xfffe108c
+#define OMAP730_IO_CONF_8	0xfffe1090
+#define OMAP730_IO_CONF_9	0xfffe1094
+#define OMAP730_IO_CONF_10	0xfffe1098
+#define OMAP730_IO_CONF_11	0xfffe109c
+#define OMAP730_IO_CONF_12	0xfffe10a0
+#define OMAP730_IO_CONF_13	0xfffe10a4
+
+#define OMAP730_MODE_1		0xfffe1010
+#define OMAP730_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0	0xfffecc10
+#define OMAP730_FLASH_ACFG_0	0xfffecc50
+#define OMAP730_FLASH_CFG_1	0xfffecc14
+#define OMAP730_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE	0xfffbb800
+#define OMAP730_DSP_M_CTL	0xfffbb804
+#define OMAP730_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
new file mode 100644
index 000000000000..face9ad41e97
--- /dev/null
+++ b/include/asm-arm/arch-omap/param.h
@@ -0,0 +1,8 @@
+/*
+ *  linux/include/asm-arm/arch-omap/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ	CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
new file mode 100644
index 000000000000..f209fc0953fb
--- /dev/null
+++ b/include/asm-arm/arch-omap/pm.h
@@ -0,0 +1,229 @@
+/*
+ * linux/include/asm/arch-omap/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Powermanagement bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_POWER_EN		0x0001
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+#define OMAP1510_ULPD_LOW_POWER_REQ	0x0001
+
+#define OMAP1610_DEEP_SLEEP_REQUEST	0x17c7
+#define OMAP1610_BIG_SLEEP_REQUEST	TBD
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+#define OMAP1610_IDLE_CLOCK_DOMAINS	0x09c7
+#define OMAP1610_ULPD_LOW_POWER_REQ	0x3
+
+#ifndef OMAP1510_SRAM_IDLE_SUSPEND
+#define OMAP1510_SRAM_IDLE_SUSPEND 0
+#endif
+#ifndef OMAP1610_SRAM_IDLE_SUSPEND
+#define OMAP1610_SRAM_IDLE_SUSPEND 0
+#endif
+#ifndef OMAP5912_SRAM_IDLE_SUSPEND
+#define OMAP5912_SRAM_IDLE_SUSPEND 0
+#endif
+
+#ifndef OMAP1510_SRAM_API_SUSPEND
+#define OMAP1510_SRAM_API_SUSPEND 0
+#endif
+#ifndef OMAP1610_SRAM_API_SUSPEND
+#define OMAP1610_SRAM_API_SUSPEND 0
+#endif
+#ifndef OMAP5912_SRAM_API_SUSPEND
+#define OMAP5912_SRAM_API_SUSPEND 0
+#endif
+
+#if     !defined(CONFIG_ARCH_OMAP1510) && \
+	!defined(CONFIG_ARCH_OMAP16XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern int omap1510_cpu_suspend(unsigned short, unsigned short);
+extern int omap1610_cpu_suspend(unsigned short, unsigned short);
+extern int omap1510_idle_loop_suspend(void);
+extern int omap1610_idle_loop_suspend(void);
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP1510)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
new file mode 100644
index 000000000000..17a2c4825f07
--- /dev/null
+++ b/include/asm-arm/arch-omap/system.h
@@ -0,0 +1,20 @@
+/*
+ * Copied from linux/include/asm-arm/arch-sa1100/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/config.h>
+#include <asm/arch/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	omap_writew(1, ARM_RSTCT1);
+}
+
+#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
new file mode 100644
index 000000000000..8ded218cbea5
--- /dev/null
+++ b/include/asm-arm/arch-omap/tc.h
@@ -0,0 +1,108 @@
+/*
+ * linux/include/asm-arm/arch-omap/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define	OMAP_EMIFS_CONFIG_REG	__REG32(EMIFS_CONFIG)
+
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		__REG32(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		__REG32(EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+	return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
new file mode 100644
index 000000000000..b61ddb491e83
--- /dev/null
+++ b/include/asm-arm/arch-omap/timex.h
@@ -0,0 +1,33 @@
+/*
+ * linux/include/asm-arm/arch-omap/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/asm-arm/arch-omap/tps65010.h
new file mode 100644
index 000000000000..0f97bb2e8fce
--- /dev/null
+++ b/include/asm-arm/arch-omap/tps65010.h
@@ -0,0 +1,80 @@
+/* linux/include/asm-arm/arch-omap/tps65010.h
+ *
+ * Functions to access TPS65010 power management device.
+ *
+ * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_TPS65010_H
+#define __ASM_ARCH_TPS65010_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Macros used by exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+#define LED1  1
+#define LED2  2
+#define OFF   0
+#define ON    1
+#define BLINK 2
+#define GPIO1 1
+#define GPIO2 2
+#define GPIO3 3
+#define GPIO4 4
+#define LOW   0
+#define HIGH  1
+
+/*
+ * ----------------------------------------------------------------------------
+ * Exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+/* Draw from VBUS:
+ *   0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+extern int tps65010_set_vbus_draw(unsigned mA);
+
+/* tps65010_set_gpio_out_value parameter:
+ * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);
+
+/* tps65010_set_led parameter:
+ * led:  LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+extern int tps65010_set_led(unsigned led, unsigned mode);
+
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+extern int tps65010_set_low_pwr(unsigned mode);
+
+#endif /*  __ASM_ARCH_TPS65010_H */
+
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
new file mode 100644
index 000000000000..3e640aba8c20
--- /dev/null
+++ b/include/asm-arm/arch-omap/uncompress.h
@@ -0,0 +1,82 @@
+/*
+ * linux/include/asm-arm/arch-omap/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/hardware.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void
+putstr(const char *s)
+{
+	volatile u8 * uart = 0;
+	int shift;
+
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif	CONFIG_OMAP_LL_DEBUG_UART2
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730)
+			shift = 0;
+		else
+			shift = 2;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (*s) {
+		while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+			barrier();
+		uart[UART_TX << shift] = *s;
+		if (*s++ == '\n') {
+			while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+				barrier();
+			uart[UART_TX << shift] = '\r';
+		}
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
new file mode 100644
index 000000000000..1438c6cef0ca
--- /dev/null
+++ b/include/asm-arm/arch-omap/usb.h
@@ -0,0 +1,108 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef	__ASM_ARCH_OMAP_USB_H
+#define	__ASM_ARCH_OMAP_USB_H
+
+#include <asm/arch/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OTG_BASE			0xfffb0400
+#define UDC_BASE			0xfffb4000
+#define OMAP_OHCI_BASE			0xfffba000
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REG32(offset)		__REG32(OTG_BASE + (offset))
+#define OTG_REG16(offset)		__REG16(OTG_BASE + (offset))
+
+#define OTG_REV_REG			OTG_REG32(0x00)
+#define OTG_SYSCON_1_REG		OTG_REG32(0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#define OTG_SYSCON_2_REG		OTG_REG32(0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL_REG			OTG_REG32(0x0c)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN_REG			OTG_REG16(0x10)
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC_REG			OTG_REG16(0x14)
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL_REG			OTG_REG16(0x18)
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST_REG			OTG_REG16(0x20)
+#define OTG_VENDOR_CODE_REG		OTG_REG32(0xfc)
+
+/*-------------------------------------------------------------------------*/
+
+#define	USB_TRANSCEIVER_CTRL_REG	__REG32(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+
+
+
+#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h
new file mode 100644
index 000000000000..c6a83581a2fc
--- /dev/null
+++ b/include/asm-arm/arch-omap/vmalloc.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/arch-omap/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h
new file mode 100644
index 000000000000..60976f830e3f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/audio.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+typedef struct {
+	int (*startup)(snd_pcm_substream_t *, void *);
+	void (*shutdown)(snd_pcm_substream_t *, void *);
+	void (*suspend)(void *);
+	void (*resume)(void *);
+	void *priv;
+} pxa2xx_audio_ops_t;
+
+#endif
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h
new file mode 100644
index 000000000000..f1f0e3387d9c
--- /dev/null
+++ b/include/asm-arm/arch-pxa/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h
new file mode 100644
index 000000000000..324db06b5dd4
--- /dev/null
+++ b/include/asm-arm/arch-pxa/corgi.h
@@ -0,0 +1,120 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H  1
+
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
+#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM		(12)
+#define CORGI_KEY_SENSE_NUM			(8)
+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
+#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+			CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device corgiscoop_device;
+
+/*
+ * External Functions
+ */
+extern unsigned long corgi_ssp_ads7846_putget(unsigned long);
+extern unsigned long corgi_ssp_ads7846_get(void);
+extern void corgi_ssp_ads7846_put(ulong data);
+extern void corgi_ssp_ads7846_lock(void);
+extern void corgi_ssp_ads7846_unlock(void);
+extern void corgi_ssp_lcdtg_send (u8 adrs, u8 data);
+extern void corgi_ssp_blduty_set(int duty);
+extern int corgi_ssp_max1111_get(ulong data);
+
+#endif /* __ASM_ARCH_CORGI_H  */
+
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
new file mode 100644
index 000000000000..f288e74b67c2
--- /dev/null
+++ b/include/asm-arm/arch-pxa/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-pxa/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x14]
+		tst	\rd, #(1 << 6)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x14]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+		.endm
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
new file mode 100644
index 000000000000..56db3d49bfc8
--- /dev/null
+++ b/include/asm-arm/arch-pxa/dma.h
@@ -0,0 +1,67 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+/* No DMA as the rest of the world see it */
+#define MAX_DMA_CHANNELS	0
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+#if defined(CONFIG_PXA27x)
+
+#define PXA_DMA_CHANNELS	32
+#define PXA_DMA_NBCH(prio)	((prio == DMA_PRIO_LOW) ? 16 : 8)
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 8,
+	DMA_PRIO_LOW = 16
+} pxa_dma_prio;
+
+#elif defined(CONFIG_PXA25x)
+
+#define PXA_DMA_CHANNELS	16
+#define PXA_DMA_NBCH(prio)	((prio == DMA_PRIO_LOW) ? 8 : 4)
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 4,
+	DMA_PRIO_LOW = 8
+} pxa_dma_prio;
+
+#endif
+
+/*
+ * DMA registration
+ */
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *, struct pt_regs *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
new file mode 100644
index 000000000000..2abfc8bb3ee5
--- /dev/null
+++ b/include/asm-arm/arch-pxa/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * include/asm-arm/arch-pxa/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifdef CONFIG_PXA27x
+		mrc	p6, 0, \irqstat, c0, c0, 0		@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0		@ ICMR
+#else
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+#endif
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #(31 - PXA_IRQ_SKIP)
+1001:
+		.endm
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
new file mode 100644
index 000000000000..72b04d846a23
--- /dev/null
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -0,0 +1,95 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+#if 0
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+#else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+#endif
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)     (*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern void pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Routine to enable or disable CKEN
+ */
+extern void pxa_set_cken(int clock, int enable);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+extern unsigned int get_lcdclk_frequency_10khz(void);
+
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
new file mode 100644
index 000000000000..e7ef497417bb
--- /dev/null
+++ b/include/asm-arm/arch-pxa/idp.h
@@ -0,0 +1,200 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
+#define IDE_IRQ				IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQT_FALLING
+
+#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE		IRQT_RISING
+
+#define IDE_IRQ_EDGE			IRQT_RISING
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQT_BOTHEDGE
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQT_BOTHEDGE
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
new file mode 100644
index 000000000000..c3bdbe44e21f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/io.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-arm/arch-pxa/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/irq.h b/include/asm-arm/arch-pxa/irq.h
new file mode 100644
index 000000000000..d770e4b37ae1
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irq.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-arm/arch-pxa/irq.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define fixup_irq(x)	(x)
+
+/*
+ * This prototype is required for cascading of multiplexed interrupts.
+ * Since it doesn't exist elsewhere, we'll put it here for now.
+ */
+extern void do_IRQ(int irq, struct pt_regs *regs);
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
new file mode 100644
index 000000000000..05c4b7027592
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -0,0 +1,219 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PXA27x
+#define PXA_IRQ_SKIP	0
+#else
+#define PXA_IRQ_SKIP	7
+#endif
+
+#define PXA_IRQ(x)	((x) - PXA_IRQ_SKIP)
+
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#ifdef CONFIG_PXA27x
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+
+#define PXA_INTERNAL_IRQS 34
+#else
+#define PXA_INTERNAL_IRQS 32
+#endif
+
+#define GPIO_2_x_TO_IRQ(x)	\
+			PXA_IRQ((x) - 2 + PXA_INTERNAL_IRQS)
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	\
+			((i) - IRQ_GPIO(2) + 2)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+#if defined(CONFIG_PXA25x)
+#define PXA_LAST_GPIO	80
+#elif defined(CONFIG_PXA27x)
+#define PXA_LAST_GPIO	127
+#endif
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(IRQ_GPIO(PXA_LAST_GPIO) + 1)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_MAINSTONE)
+#define NR_IRQS			(IRQ_BOARD_END)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h
new file mode 100644
index 000000000000..11ee73593fc3
--- /dev/null
+++ b/include/asm-arm/arch-pxa/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/lubbock.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT	(0xf0000000)
+#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)		LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h
new file mode 100644
index 000000000000..14c862adcaa1
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/mainstone.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 14, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS		PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS		PXA_CS2_PHYS
+#define MST_FPGA_VIRT		(0xf0000000)
+#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)		MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1		__MST_REG(0x08000010)
+#define MST_LEDDAT2		__MST_REG(0x08000014)
+#define MST_LEDCTRL		__MST_REG(0x08000040)
+#define MST_GPSWR		__MST_REG(0x08000060)
+#define MST_MSCWR1		__MST_REG(0x08000080)
+#define MST_MSCWR2		__MST_REG(0x08000084)
+#define MST_MSCWR3		__MST_REG(0x08000088)
+#define MST_MSCRD		__MST_REG(0x08000090)
+#define MST_INTMSKENA		__MST_REG(0x080000c0)
+#define MST_INTSETCLR		__MST_REG(0x080000d0)
+#define MST_PCMCIA0		__MST_REG(0x080000e0)
+#define MST_PCMCIA1		__MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
new file mode 100644
index 000000000000..217a80b820ff
--- /dev/null
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -0,0 +1,76 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0xa0000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 26)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn)		(((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & 0x03ffffff) >> PAGE_SHIFT)
+
+#else
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
new file mode 100644
index 000000000000..7492ea7ea614
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -0,0 +1,19 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/protocol.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	int (*init)(struct device *, irqreturn_t (*)(int, void *, struct pt_regs *), void *);
+	void (*setpower)(struct device *, unsigned int);
+	void (*exit)(struct device *, void *);
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/param.h b/include/asm-arm/arch-pxa/param.h
new file mode 100644
index 000000000000..3197d82d7573
--- /dev/null
+++ b/include/asm-arm/arch-pxa/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/param.h
+ */
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
new file mode 100644
index 000000000000..58bda9d571a5
--- /dev/null
+++ b/include/asm-arm/arch-pxa/poodle.h
@@ -0,0 +1,70 @@
+/*
+ * linux/include/asm-arm/arch-pxa/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   linux/include/asm-arm/arch-sa1100/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY		(0)
+#define POODLE_GPIO_AC_IN		(1)
+#define POODLE_GPIO_CO			16
+#define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
+#define POODLE_GPIO_GA_INT		(10)
+#define POODLE_GPIO_IR_ON		(22)
+#define POODLE_GPIO_HP_IN		(4)
+#define POODLE_GPIO_CF_IRQ		(17)
+#define POODLE_GPIO_CF_CD		(14)
+#define POODLE_GPIO_CF_STSCHG		(14)
+#define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_nSD_CLK		(6)
+#define POODLE_GPIO_nSD_WP		(7)
+#define POODLE_GPIO_nSD_INT		(8)
+#define POODLE_GPIO_nSD_DETECT		(9)
+#define POODLE_GPIO_MAIN_BAT_LOW	(13)
+#define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_ADC_TEMP_ON		(21)
+#define POODLE_GPIO_BYPASS_ON		(36)
+#define POODLE_GPIO_CHRG_ON		(38)
+#define POODLE_GPIO_CHRG_FULL		(16)
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO4
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO16
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO5
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO11
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO10
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO17
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO14
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO8
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO9
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO13
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT	( 0 )
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
new file mode 100644
index 000000000000..39741d3c9a34
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -0,0 +1,2251 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+#include <linux/config.h>
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_ENRINTR	(1 << 9)        /* The end of Receive */
+#endif
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)	__REG2(0x40000100, (n)<<2)
+#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		__REG(0x4000013c)  /* Reserved */
+#define DRCMR16		__REG(0x40000140)  /* Reserved */
+#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		__REG(0x4000015c)  /* Reserved */
+#define DRCMR24		__REG(0x40000160)  /* Reserved */
+#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		__REG(0x40000174)  /* Reserved */
+#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		__REG(0x40000188)  /* Reserved */
+#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		__REG(0x4000019C)  /* Reserved */
+
+#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR	DRCMR2
+#define DRCMRTXSADR	DRCMR3
+#define DRCMRRXBTRBR	DRCMR4
+#define DRCMRTXBTTHR	DRCMR5
+#define DRCMRRXFFRBR	DRCMR6
+#define DRCMRTXFFTHR	DRCMR7
+#define DRCMRRXMCDR	DRCMR8
+#define DRCMRRXMODR	DRCMR9
+#define DRCMRTXMODR	DRCMR10
+#define DRCMRRXPCDR	DRCMR11
+#define DRCMRTXPCDR	DRCMR12
+#define DRCMRRXSSDR	DRCMR13
+#define DRCMRTXSSDR	DRCMR14
+#define DRCMRRXSS2DR   DRCMR15
+#define DRCMRTXSS2DR   DRCMR16
+#define DRCMRRXICDR	DRCMR17
+#define DRCMRTXICDR	DRCMR18
+#define DRCMRRXSTRBR	DRCMR19
+#define DRCMRTXSTTHR	DRCMR20
+#define DRCMRRXMMC	DRCMR21
+#define DRCMRTXMMC	DRCMR22
+#define DRCMRRXSS3DR   DRCMR66
+#define DRCMRTXSS3DR   DRCMR67
+#define DRCMRUDC(x)	DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	__REG2(0x40000200, (x) << 4)
+#define DSADR(x)	__REG2(0x40000204, (x) << 4)
+#define DTADR(x)	__REG2(0x40000208, (x) << 4)
+#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
+#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+/* FIXME: This clash with SA1111 defines */
+#ifndef _ASM_ARCH_SA1111
+
+#define SACR0		__REG(0x40400000)  /* Global Control Register */
+#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
+#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
+#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
+#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)	(x << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	(x << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
+#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
+#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
+#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
+#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
+#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
+#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
+#define SACR1_AMSL	(1 << 1)	/* Specify Alternate Mode */
+
+#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
+#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
+#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
+#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
+#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
+#define SASR0_BSY	(1 << 2)	/* I2S Busy */
+#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
+#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
+
+#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
+
+#endif
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * USB Device Controller
+ * PXA25x and PXA27x USB device controller registers are different.
+ */
+#if defined(CONFIG_PXA25x)
+
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+
+#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+
+#elif defined(CONFIG_PXA27x)
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCISR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCISR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCISR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCISR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
+#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+#endif
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Adress match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#ifdef CONFIG_PXA27x
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+#endif
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#ifdef CONFIG_PXA27x
+
+/* Interrupt Controller */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST		1	/* reset */
+#define GPIO6_MMCCLK		6	/* MMC Clock */
+#define GPIO7_48MHz		7	/* 48 MHz clock output */
+#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
+#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
+#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
+#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
+#define GPIO12_32KHz		12	/* 32 kHz out */
+#define GPIO13_MBGNT		13	/* memory controller grant */
+#define GPIO14_MBREQ		14	/* alternate bus master request */
+#define GPIO15_nCS_1		15	/* chip select 1 */
+#define GPIO16_PWM0		16	/* PWM0 output */
+#define GPIO17_PWM1		17	/* PWM1 output */
+#define GPIO18_RDY		18	/* Ext. Bus Ready */
+#define GPIO19_DREQ1		19	/* External DMA Request */
+#define GPIO20_DREQ0		20	/* External DMA Request */
+#define GPIO23_SCLK		23	/* SSP clock */
+#define GPIO24_SFRM		24	/* SSP Frame */
+#define GPIO25_STXD		25	/* SSP transmit */
+#define GPIO26_SRXD		26	/* SSP receive */
+#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
+#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
+#define GPIO31_SYNC		31	/* AC97/I2S sync */
+#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK		32	/* I2S System Clock */
+#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
+#define GPIO33_nCS_5		33	/* chip select 5 */
+#define GPIO34_FFRXD		34	/* FFUART receive */
+#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
+#define GPIO35_FFCTS		35	/* FFUART Clear to send */
+#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
+#define GPIO37_FFDSR		37	/* FFUART data set ready */
+#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
+#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
+#define GPIO39_FFTXD		39	/* FFUART transmit data */
+#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
+#define GPIO41_FFRTS		41	/* FFUART request to send */
+#define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
+#define GPIO46_ICPRXD		46	/* ICP receive data */
+#define GPIO46_STRXD		46	/* STD_UART receive data */
+#define GPIO47_ICPTXD		47	/* ICP transmit data */
+#define GPIO47_STTXD		47	/* STD_UART transmit data */
+#define GPIO48_nPOE		48	/* Output Enable for Card Space */
+#define GPIO49_nPWE		49	/* Write Enable for Card Space */
+#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
+#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
+#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
+#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
+#define GPIO53_MMCCLK		53	/* MMC Clock */
+#define GPIO54_MMCCLK		54	/* MMC Clock */
+#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
+#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
+#define GPIO55_nPREG		55	/* Card Address bit 26 */
+#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
+#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0		58	/* LCD data pin 0 */
+#define GPIO59_LDD_1		59	/* LCD data pin 1 */
+#define GPIO60_LDD_2		60	/* LCD data pin 2 */
+#define GPIO61_LDD_3		61	/* LCD data pin 3 */
+#define GPIO62_LDD_4		62	/* LCD data pin 4 */
+#define GPIO63_LDD_5		63	/* LCD data pin 5 */
+#define GPIO64_LDD_6		64	/* LCD data pin 6 */
+#define GPIO65_LDD_7		65	/* LCD data pin 7 */
+#define GPIO66_LDD_8		66	/* LCD data pin 8 */
+#define GPIO66_MBREQ		66	/* alternate bus master req */
+#define GPIO67_LDD_9		67	/* LCD data pin 9 */
+#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
+#define GPIO68_LDD_10		68	/* LCD data pin 10 */
+#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
+#define GPIO69_LDD_11		69	/* LCD data pin 11 */
+#define GPIO69_MMCCLK		69	/* MMC_CLK */
+#define GPIO70_LDD_12		70	/* LCD data pin 12 */
+#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13		71	/* LCD data pin 13 */
+#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14		72	/* LCD data pin 14 */
+#define GPIO72_32kHz		72	/* 32 kHz clock */
+#define GPIO73_LDD_15		73	/* LCD data pin 15 */
+#define GPIO73_MBGNT		73	/* Memory controller grant */
+#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
+#define GPIO75_LCD_LCLK		75	/* LCD line clock */
+#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
+#define GPIO78_nCS_2		78	/* chip select 2 */
+#define GPIO79_nCS_3		79	/* chip select 3 */
+#define GPIO80_nCS_4		80	/* chip select 4 */
+#define GPIO81_NSCLK		81	/* NSSP clock */
+#define GPIO82_NSFRM		82	/* NSSP Frame */
+#define GPIO83_NSTXD		83	/* NSSP transmit */
+#define GPIO84_NSRXD		84	/* NSSP receive */
+#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
+#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
+#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN			0x000
+#define GPIO_OUT		0x080
+#define GPIO_ALT_FN_1_IN	0x100
+#define GPIO_ALT_FN_1_OUT	0x180
+#define GPIO_ALT_FN_2_IN	0x200
+#define GPIO_ALT_FN_2_OUT	0x280
+#define GPIO_ALT_FN_3_IN	0x300
+#define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_MD_MASK_NR		0x07f
+#define GPIO_MD_MASK_DIR	0x080
+#define GPIO_MD_MASK_FN		0x300
+#define GPIO_DFLT_LOW		0x400
+#define GPIO_DFLT_HIGH		0x800
+
+#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
+#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
+#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
+#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD		( 32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
+#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
+#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_SYSCLK_AC97_MD		(45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
+#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT 	(81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN  	(81 | GPIO_ALT_FN_1_IN)
+#define GPIO82_NSSP_FRM_OUT 	(82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN  	(82 | GPIO_ALT_FN_1_IN)
+#define GPIO83_NSSP_TX      	(83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX      	(83 | GPIO_ALT_FN_2_IN)
+#define GPIO84_NSSP_TX      	(84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX      	(84 | GPIO_ALT_FN_2_IN)
+#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
+#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/*Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/*Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/*Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+ /* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
+#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR	(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR	(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_DMYSTOP(x)	(x << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	(x << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	(x << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	(x << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	(x << 4)	/* Start Delay */
+#define SSPSP_ETDS			(1 << 3)	/* End of Transfer data State */
+#define SSPSP_SFRMP			(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)		(x << 0)	/* Serial Bit Rate Clock Mode */
+
+
+#define SSCR0_P1	__REG(0x41000000)  /* SSP Port 1 Control Register 0 */
+#define SSCR1_P1	__REG(0x41000004)  /* SSP Port 1 Control Register 1 */
+#define SSSR_P1		__REG(0x41000008)  /* SSP Port 1 Status Register */
+#define SSITR_P1	__REG(0x4100000C)  /* SSP Port 1 Interrupt Test Register */
+#define SSDR_P1		__REG(0x41000010)  /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
+
+/* Support existing PXA25x drivers */
+#define SSCR0		SSCR0_P1  /* SSP Control Register 0 */
+#define SSCR1		SSCR1_P1  /* SSP Control Register 1 */
+#define SSSR		SSSR_P1	  /* SSP Status Register */
+#define SSITR		SSITR_P1  /* SSP Interrupt Test Register */
+#define SSDR		SSDR_P1	  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+
+/* PXA27x ports */
+#if defined (CONFIG_PXA27x)
+#define SSTO_P1		__REG(0x41000028)  /* SSP Port 1 Time Out Register */
+#define SSPSP_P1	__REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
+#define SSCR0_P2	__REG(0x41700000)  /* SSP Port 2 Control Register 0 */
+#define SSCR1_P2	__REG(0x41700004)  /* SSP Port 2 Control Register 1 */
+#define SSSR_P2		__REG(0x41700008)  /* SSP Port 2 Status Register */
+#define SSITR_P2	__REG(0x4170000C)  /* SSP Port 2 Interrupt Test Register */
+#define SSDR_P2		__REG(0x41700010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
+#define SSTO_P2		__REG(0x41700028)  /* SSP Port 2 Time Out Register */
+#define SSPSP_P2	__REG(0x4170002C)  /* SSP Port 2 Programmable Serial Protocol */
+#define SSCR0_P3	__REG(0x41900000)  /* SSP Port 3 Control Register 0 */
+#define SSCR1_P3	__REG(0x41900004)  /* SSP Port 3 Control Register 1 */
+#define SSSR_P3		__REG(0x41900008)  /* SSP Port 3 Status Register */
+#define SSITR_P3	__REG(0x4190000C)  /* SSP Port 3 Interrupt Test Register */
+#define SSDR_P3		__REG(0x41900010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
+#define SSTO_P3		__REG(0x41900028)  /* SSP Port 3 Time Out Register */
+#define SSPSP_P3	__REG(0x4190002C)  /* SSP Port 3 Programmable Serial Protocol */
+#else /* PXA255 (only port 2) and PXA26x ports*/
+#define SSTO_P1		__REG(0x41000028)  /* SSP Port 1 Time Out Register */
+#define SSPSP_P1	__REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
+#define SSCR0_P2	__REG(0x41400000)  /* SSP Port 2 Control Register 0 */
+#define SSCR1_P2	__REG(0x41400004)  /* SSP Port 2 Control Register 1 */
+#define SSSR_P2		__REG(0x41400008)  /* SSP Port 2 Status Register */
+#define SSITR_P2	__REG(0x4140000C)  /* SSP Port 2 Interrupt Test Register */
+#define SSDR_P2		__REG(0x41400010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
+#define SSTO_P2		__REG(0x41400028)  /* SSP Port 2 Time Out Register */
+#define SSPSP_P2	__REG(0x4140002C)  /* SSP Port 2 Programmable Serial Protocol */
+#define SSCR0_P3	__REG(0x41500000)  /* SSP Port 3 Control Register 0 */
+#define SSCR1_P3	__REG(0x41500004)  /* SSP Port 3 Control Register 1 */
+#define SSSR_P3		__REG(0x41500008)  /* SSP Port 3 Status Register */
+#define SSITR_P3	__REG(0x4150000C)  /* SSP Port 3 Interrupt Test Register */
+#define SSDR_P3		__REG(0x41500010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
+#define SSTO_P3		__REG(0x41500028)  /* SSP Port 3 Time Out Register */
+#define SSPSP_P3	__REG(0x4150002C)  /* SSP Port 3 Programmable Serial Protocol */
+#endif
+
+#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL))
+#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL))
+#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL))
+#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL))
+#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
+#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
+#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
+
+/*
+ * MultiMediaCard (MMC) controller
+ */
+
+#define MMC_STRPCL	__REG(0x41100000)  /* Control to start and stop MMC clock */
+#define MMC_STAT	__REG(0x41100004)  /* MMC Status Register (read only) */
+#define MMC_CLKRT	__REG(0x41100008)  /* MMC clock rate */
+#define MMC_SPI		__REG(0x4110000c)  /* SPI mode control bits */
+#define MMC_CMDAT	__REG(0x41100010)  /* Command/response/data sequence control */
+#define MMC_RESTO	__REG(0x41100014)  /* Expected response time out */
+#define MMC_RDTO	__REG(0x41100018)  /* Expected data read time out */
+#define MMC_BLKLEN	__REG(0x4110001c)  /* Block length of data transaction */
+#define MMC_NOB		__REG(0x41100020)  /* Number of blocks, for block mode */
+#define MMC_PRTBUF	__REG(0x41100024)  /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK	__REG(0x41100028)  /* Interrupt Mask */
+#define MMC_I_REG	__REG(0x4110002c)  /* Interrupt Register (read only) */
+#define MMC_CMD		__REG(0x41100030)  /* Index of current command */
+#define MMC_ARGH	__REG(0x41100034)  /* MSW part of the current command argument */
+#define MMC_ARGL	__REG(0x41100038)  /* LSW part of the current command argument */
+#define MMC_RES		__REG(0x4110003c)  /* Response FIFO (read only) */
+#define MMC_RXFIFO	__REG(0x41100040)  /* Receive FIFO (read only) */
+#define MMC_TXFIFO	__REG(0x41100044)  /* Transmit FIFO (write only) */
+
+
+/*
+ * Core Clock
+ */
+
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+
+#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
+#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
+#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
+#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
+#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
+#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
+#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
+#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
+#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
+#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
+#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
+#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
+#define CKEN10_ASSP	(1 << 10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
+#define CKEN9_OSTIMER	(1 << 9)	/* OS Timer Unit Clock Enable */
+#define CKEN9_NSSP	(1 << 9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
+#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
+#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
+#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
+#define CKEN4_SSP3	(1 << 4)	/* SSP3 Unit Clock Enable */
+#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
+#define CKEN3_SSP2	(1 << 3)	/* SSP2 Unit Clock Enable */
+#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
+#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
+#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+
+/*
+ * LCD
+ */
+
+#define LCCR0		__REG(0x44000000)  /* LCD Controller Control Register 0 */
+#define LCCR1		__REG(0x44000004)  /* LCD Controller Control Register 1 */
+#define LCCR2		__REG(0x44000008)  /* LCD Controller Control Register 2 */
+#define LCCR3		__REG(0x4400000C)  /* LCD Controller Control Register 3 */
+#define DFBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
+#define DFBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
+#define LCSR		__REG(0x44000038)  /* LCD Controller Status Register */
+#define LIIDR		__REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	__REG(0x44000040)  /* TMED RGB Seed Register */
+#define TMEDCR		__REG(0x44000044)  /* TMED Control Register */
+
+#define LCCR3_1BPP (0 << 24)
+#define LCCR3_2BPP (1 << 24)
+#define LCCR3_4BPP (2 << 24)
+#define LCCR3_8BPP (3 << 24)
+#define LCCR3_16BPP (4 << 24)
+
+#define FDADR0		__REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		__REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		__REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
+#define LDCMD0		__REG(0x4400020C)  /* DMA Channel 0 Command Register */
+#define FDADR1		__REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		__REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		__REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
+#define LDCMD1		__REG(0x4400021C)  /* DMA Channel 1 Command Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color     (LCCR0_CMS*0)   /*  Color display                  */
+#define LCCR0_Mono      (LCCR0_CMS*1)   /*  Monochrome display             */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display       */
+                                        /* Select                          */
+#define LCCR0_Sngl      (LCCR0_SDS*0)   /*  Single panel display           */
+#define LCCR0_Dual      (LCCR0_SDS*1)   /*  Dual panel display             */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select   */
+#define LCCR0_Pas       (LCCR0_PAS*0)   /*  Passive display (STN)          */
+#define LCCR0_Act       (LCCR0_PAS*1)   /*  Active display (TFT)           */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome   */
+                                        /* display mode)                   */
+#define LCCR0_4PixMono  (LCCR0_DPD*0)   /*  4-Pixel/clock Monochrome       */
+                                        /*  display                        */
+#define LCCR0_8PixMono  (LCCR0_DPD*1)   /*  8-Pixel/clock Monochrome       */
+                                        /*  display                        */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20) 	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+
+#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
+                        (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
+#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
+                                        /* pulse Width [1..64 Tpix]       */ \
+                        (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
+                                        /* count - 1 [Tpix]                */
+#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
+                                        /*  [1..256 Tpix]                  */ \
+                        (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
+                                        /* Wait count - 1 [Tpix]           */
+#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
+                                        /*  [1..256 Tpix]                  */ \
+                        (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+
+#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
+#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
+                        (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
+                                        /* Width - 1 [Tln] (L_FCLK)        */
+#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
+                                        /*  Width [1..64 Tln]              */ \
+                        (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
+                                        /* count [Tln]                     */
+#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
+                                        /*  [0..255 Tln]                   */ \
+                        ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
+                                        /* Wait count [Tln]                */
+#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
+                                        /*  [0..255 Tln]                   */ \
+                        ((Tln) << FShft (LCCR2_BFW))
+
+#if 0
+#define LCCR3_PCD	(0xff)		/* Pixel clock divisor */
+#define LCCR3_ACB	(0xff << 8)	/* AC Bias pin frequency */
+#define LCCR3_ACB_S	8
+#endif
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK)   */
+#define LCCR3_PixRsEdg  (LCCR3_PCP*0)   /*  Pixel clock Rising-Edge        */
+#define LCCR3_PixFlEdg  (LCCR3_PCP*1)   /*  Pixel clock Falling-Edge       */
+
+#define LCCR3_OEP       (1 << 23)       /* Output Enable Polarity (L_BIAS, */
+                                        /* active display mode)            */
+#define LCCR3_OutEnH    (LCCR3_OEP*0)   /*  Output Enable active High      */
+#define LCCR3_OutEnL    (LCCR3_OEP*1)   /*  Output Enable active Low       */
+
+#if 0
+#define LCCR3_BPP	(7 << 24)	/* bits per pixel */
+#define LCCR3_BPP_S	24
+#endif
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+
+
+#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
+                        (((Div) << FShft (LCCR3_PCD)))
+
+
+#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
+                        (((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
+#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
+                        (((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
+                                        /*  pulse active High              */
+#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */
+
+#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
+                                        /*  active High                    */
+#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
+                                        /*  active Low                     */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+/*
+ * Keypad
+ */
+#define KPC             __REG(0x41500000) /* Keypad Interface Control register */
+#define KPDK            __REG(0x41500008) /* Keypad Interface Direct Key register */
+#define KPREC           __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
+#define KPMK            __REG(0x41500018) /* Keypad Interface Matrix Key register */
+#define KPAS            __REG(0x41500020) /* Keypad Interface Automatic Scan register */
+#define KPASMKP0        __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1        __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2        __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3        __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI           __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
+
+#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
+#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
+#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
+#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
+#define KPC_MS7         (0x1 << 20)  /* Matrix scan line 7 */
+#define KPC_MS6         (0x1 << 19)  /* Matrix scan line 6 */
+#define KPC_MS5         (0x1 << 18)  /* Matrix scan line 5 */
+#define KPC_MS4         (0x1 << 17)  /* Matrix scan line 4 */
+#define KPC_MS3         (0x1 << 16)  /* Matrix scan line 3 */
+#define KPC_MS2         (0x1 << 15)  /* Matrix scan line 2 */
+#define KPC_MS1         (0x1 << 14)  /* Matrix scan line 1 */
+#define KPC_MS0         (0x1 << 13)  /* Matrix scan line 0 */
+#define KPC_MS_ALL      (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
+#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
+#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
+#define KPC_DK_DEB_SEL	(0x1 <<  9)  /* Direct Keypad Debounce Select */
+#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
+#define KPC_RE_ZERO_DEB (0x1 <<  4)  /* Rotary Encoder Zero Debounce */
+#define KPC_REE1        (0x1 <<  3)  /* Rotary Encoder1 Enable */
+#define KPC_REE0        (0x1 <<  2)  /* Rotary Encoder0 Enable */
+#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
+#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */
+
+#define KPDK_DKP        (0x1 << 31)
+#define KPDK_DK7        (0x1 <<  7)
+#define KPDK_DK6        (0x1 <<  6)
+#define KPDK_DK5        (0x1 <<  5)
+#define KPDK_DK4        (0x1 <<  4)
+#define KPDK_DK3        (0x1 <<  3)
+#define KPDK_DK2        (0x1 <<  2)
+#define KPDK_DK1        (0x1 <<  1)
+#define KPDK_DK0        (0x1 <<  0)
+
+#define KPREC_OF1       (0x1 << 31)
+#define kPREC_UF1       (0x1 << 30)
+#define KPREC_OF0       (0x1 << 15)
+#define KPREC_UF0       (0x1 << 14)
+
+#define KPMK_MKP        (0x1 << 31)
+#define KPAS_SO         (0x1 << 31)
+#define KPASMKPx_SO     (0x1 << 31)
+
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS	(0x4C000000)
+#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
+#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+/* Camera Interface */
+#define CICR0		__REG(0x50000000)
+#define CICR1		__REG(0x50000004)
+#define CICR2		__REG(0x50000008)
+#define CICR3		__REG(0x5000000C)
+#define CICR4		__REG(0x50000010)
+#define CISR		__REG(0x50000014)
+#define CIFR		__REG(0x50000018)
+#define CITOR		__REG(0x5000001C)
+#define CIBR0		__REG(0x50000028)
+#define CIBR1		__REG(0x50000030)
+#define CIBR2		__REG(0x50000038)
+
+#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
+#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
+#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
+#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
+#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
+#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
+#define CICR0_TOM	(1 << 9)	/* Time-out mask */
+#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
+#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
+#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
+#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
+#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
+#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
+#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
+#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
+#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
+
+#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
+#define CICR1_RGBT_CONV	(0x3 << 30)	/* RGBT conversion mask */
+#define CICR1_PPL	(0x3f << 15)	/* Pixels per line mask */
+#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
+#define CICR1_RGB_F	(1 << 11)	/* RGB format */
+#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
+#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
+#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
+#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
+#define CICR1_DW	(0x7 << 0)	/* Data width mask */
+
+#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
+					   wait count mask */
+#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
+					   wait count mask */
+#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
+#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
+					   wait count mask */
+
+#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
+					   wait count mask */
+#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
+					   wait count mask */
+#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
+#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR3_LPF	(0x3ff << 0)	/* Lines per frame mask */
+
+#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
+#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
+#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
+#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
+#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
+#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
+#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
+
+#define CISR_FTO	(1 << 15)	/* FIFO time-out */
+#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
+#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
+#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
+#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
+#define CISR_EOL	(1 << 8)	/* End of line */
+#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
+#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
+#define CISR_SOF	(1 << 5)	/* Start of frame */
+#define CISR_CDD	(1 << 4)	/* Camera interface disable done */
+#define CISR_EOF	(1 << 3)	/* End of frame */
+#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
+#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
+#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
+#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
+#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
+#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
+#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
+#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
+#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
+
+#define SRAM_SIZE		0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS		0x5C000000
+
+#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
new file mode 100644
index 000000000000..27d71e9d413b
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -0,0 +1,68 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int);
+
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h
new file mode 100644
index 000000000000..6ec67b018c09
--- /dev/null
+++ b/include/asm-arm/arch-pxa/ssp.h
@@ -0,0 +1,47 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ */
+
+#ifndef SSP_H
+#define SSP_H
+
+struct ssp_state {
+	u32	cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+};
+
+struct ssp_dev {
+	u32 port;
+	u32 mode;
+	u32 flags;
+	u32 psp_flags;
+	u32 speed;
+};
+
+int ssp_write_word(struct ssp_dev *dev, u32 data);
+int ssp_read_word(struct ssp_dev *dev);
+void ssp_flush(struct ssp_dev *dev);
+void ssp_enable(struct ssp_dev *dev);
+void ssp_disable(struct ssp_dev *dev);
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
+int ssp_init(struct ssp_dev *dev, u32 port);
+int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
+void ssp_exit(struct ssp_dev *dev);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
new file mode 100644
index 000000000000..840a46bfbc54
--- /dev/null
+++ b/include/asm-arm/arch-pxa/system.h
@@ -0,0 +1,34 @@
+/*
+ * linux/include/asm-arm/arch-pxa/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Initialize the watchdog and let it fire */
+		OWER = OWER_WME;
+		OSSR = OSSR_M3;
+		OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+	}
+}
+
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
new file mode 100644
index 000000000000..aa125ec56a32
--- /dev/null
+++ b/include/asm-arm/arch-pxa/timex.h
@@ -0,0 +1,25 @@
+/*
+ * linux/include/asm-arm/arch-pxa/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#endif
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
new file mode 100644
index 000000000000..30548a30c773
--- /dev/null
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-arm/arch-pxa/udc.h
+ *
+ * This supports machine-specific differences in how the PXA2xx
+ * USB Device Controller (UDC) is wired.
+ *
+ * It is set in linux/arch/arm/mach-pxa/<machine>.c and used in
+ * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
+ */
+struct pxa2xx_udc_mach_info {
+        int  (*udc_is_connected)(void);		/* do we see host? */
+        void (*udc_command)(int cmd);
+#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
+#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
+};
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
new file mode 100644
index 000000000000..4428d3eb7432
--- /dev/null
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -0,0 +1,42 @@
+/*
+ * linux/include/asm-arm/arch-pxa/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define FFUART		((volatile unsigned long *)0x40100000)
+#define BTUART		((volatile unsigned long *)0x40200000)
+#define STUART		((volatile unsigned long *)0x40700000)
+
+#define UART		FFUART
+
+
+static __inline__ void putc(char c)
+{
+	while (!(UART[5] & 0x20));
+	UART[0] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h
new file mode 100644
index 000000000000..3381af6ddb0d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/vmalloc.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-pxa/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h
new file mode 100644
index 000000000000..ecb7733a0949
--- /dev/null
+++ b/include/asm-arm/arch-rpc/acornfb.h
@@ -0,0 +1,140 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/acornfb.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+	u_long limit;
+
+	if (!var->pixclock)
+		return 0;
+
+	/*
+	 * Limits below are taken from RISC OS bandwidthlimit file
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			limit = 6578;
+		else
+			limit = 13157;
+	} else {
+		limit = 26315;
+	}
+
+	return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+	u_int r, best_r = 2, best_v = 2;
+	int best_d = 0x7fffffff;
+
+	for (r = 2; r <= 32; r++) {
+		u_int rr, v, p;
+		int d;
+
+		rr = 41667 * r;
+
+		v = (rr + pixclk / 2) / pixclk;
+
+		if (v > 32 || v < 2)
+			continue;
+
+		p = (rr + v / 2) / v;
+
+		d = pixclk - p;
+
+		if (d < 0)
+			d = -d;
+
+		if (d < best_d) {
+			best_d = d;
+			best_v = v - 1;
+			best_r = r - 1;
+		}
+
+		if (d == 0)
+			break;
+	}
+
+	return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int div;
+
+	/* Select pixel-clock divisor to keep PLL in range */
+	div = var->pixclock / 9090; /*9921*/
+
+	/* Limit divisor */
+	if (div == 0)
+		div = 1;
+	if (div > 8)
+		div = 8;
+
+	/* Encode divisor to VIDC20 setting */
+	switch (div) {
+	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
+	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+	}
+
+	/*
+	 * With VRAM, the FIFO can be set to the highest possible setting
+	 * because there are no latency considerations for other memory
+	 * accesses. However, in 64 bit bus mode the FIFO preload value
+	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+	 * FIFO preload value).
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	} else {
+		unsigned long bandwidth = acornfb_bandwidth(var);
+
+		/* Encode bandwidth as VIDC20 setting */
+		if (bandwidth > 33334)		/* < 30.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_16;
+		else if (bandwidth > 26666)	/* < 37.5MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_20;
+		else if (bandwidth > 22222)	/* < 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else				/* > 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	}
+
+	/* Find the PLL values */
+	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
new file mode 100644
index 000000000000..0711828164cd
--- /dev/null
+++ b/include/asm-arm/arch-rpc/debug-macro.S
@@ -0,0 +1,35 @@
+/* linux/include/asm-arm/arch-rpc/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000fe0
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #0x14]
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldrb	\rd, [\rx, #0x18]
+		tst	\rd, #0x10
+		beq	1001b
+		.endm
diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h
new file mode 100644
index 000000000000..d24a27e30b93
--- /dev/null
+++ b/include/asm-arm/arch-rpc/dma.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
new file mode 100644
index 000000000000..686f413f82d6
--- /dev/null
+++ b/include/asm-arm/arch-rpc/entry-macro.S
@@ -0,0 +1,3 @@
+
+#include <asm/hardware/entry-macro-iomd.S>
+
diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h
new file mode 100644
index 000000000000..be9754a05c19
--- /dev/null
+++ b/include/asm-arm/arch-rpc/hardware.h
@@ -0,0 +1,86 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/arch/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_SIZE		0x10000000
+#define RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		0xe5000000
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define FLUSH_BASE		0xdf000000
+#define UNCACHEABLE_ADDR	0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define EXPMASK_BASE		0xe0360000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+
+#define FLUSH_BASE_PHYS		0x00000000	/* ROM */
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE		0x81400000
+#define IO_EC_IOC4_BASE		0x8009c000
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC8_BASE	0x8000ac00
+#define IO_EC_MEMC_BASE		0x80000000
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
new file mode 100644
index 000000000000..24453c405a87
--- /dev/null
+++ b/include/asm-arm/arch-rpc/io.h
@@ -0,0 +1,257 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline void __iomem *__ioaddr(unsigned int port)
+{
+	void __iomem *ret;
+	if (__PORT_PCIO(port))
+		ret = PCIO_BASE;
+	else
+		ret = IO_BASE;
+	return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)		\
+	((__PORT_PCIO(port) ? PCIO_BASE : IO_BASE) + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h
new file mode 100644
index 000000000000..27c35b05b27d
--- /dev/null
+++ b/include/asm-arm/arch-rpc/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
+
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
new file mode 100644
index 000000000000..33fc75cdead0
--- /dev/null
+++ b/include/asm-arm/arch-rpc/memory.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x10000000UL)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-rpc/param.h b/include/asm-arm/arch-rpc/param.h
new file mode 100644
index 000000000000..721dcd658858
--- /dev/null
+++ b/include/asm-arm/arch-rpc/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/param.h
+ */
diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h
new file mode 100644
index 000000000000..ca3277d1d5ea
--- /dev/null
+++ b/include/asm-arm/arch-rpc/system.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h
new file mode 100644
index 000000000000..ed7df64d960b
--- /dev/null
+++ b/include/asm-arm/arch-rpc/timex.h
@@ -0,0 +1,17 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h
new file mode 100644
index 000000000000..43035fec64d2
--- /dev/null
+++ b/include/asm-arm/arch-rpc/uncompress.h
@@ -0,0 +1,155 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+int video_num_columns, video_num_lines, video_size_row;
+int white, bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	unsigned char c;
+	char *ptr;
+
+	x = params->video_x;
+	y = params->video_y;
+
+	while ( ( c = *(unsigned char *)s++ ) != '\0' ) {
+		if ( c == '\n' ) {
+			x = 0;
+			if ( ++y >= video_num_lines ) {
+				y--;
+			}
+		} else {
+			ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h);
+			ll_write_char(ptr, c, white);
+			if ( ++x >= video_num_columns ) {
+				x = 0;
+				if ( ++y >= video_num_lines ) {
+					y--;
+				}
+			}
+		}
+	}
+
+	params->video_x = x;
+	params->video_y = y;
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	
+	video_num_lines = params->video_num_rows;
+	video_num_columns = params->video_num_cols;
+	bytes_per_char_h = params->bytes_per_char_h;
+	video_size_row = video_num_columns * bytes_per_char_h;
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (params->nr_pages * params->page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h
new file mode 100644
index 000000000000..a13c27f37d71
--- /dev/null
+++ b/include/asm-arm/arch-rpc/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  linux/include/asm-arm/arch-rpc/vmalloc.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
new file mode 100644
index 000000000000..e28ca51a4975
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-cpld.h
@@ -0,0 +1,58 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  25-May-2003 BJD  Created file, added CTRL1 registers
+ *  30-Aug-2004 BJD  Updated definitions from 2.4.26 port
+ *  30-Aug-2004 BJD  Added CTRL3 and CTRL4 definitions
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
+#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
+#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
+#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND       (0x04)
+#define BAST_CPLD_CTLR2_IDERST      (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT	    (0x01)
+#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
+#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
+#define BAST_CPLD_DMA0_SECIDE      (1<<0)
+#define BAST_CPLD_DMA0_ISA15       (2<<0)
+#define BAST_CPLD_DMA0_ISA36       (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
+#define BAST_CPLD_DMA1_SECIDE      (1<<2)
+#define BAST_CPLD_DMA1_ISA15       (2<<2)
+#define BAST_CPLD_DMA1_ISA36       (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
new file mode 100644
index 000000000000..b79b47f0d126
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-irq.h
@@ -0,0 +1,33 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  14-Sep-2004 BJD  Fixed IRQ_USBOC definition
+ *  06-Jan-2003 BJD  Linux 2.6.0 version
+ */
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC      IRQ_EINT18
+#define IRQ_IDE0       IRQ_EINT16
+#define IRQ_IDE1       IRQ_EINT17
+#define IRQ_PCSERIAL1  IRQ_EINT15
+#define IRQ_PCSERIAL2  IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX       IRQ_EINT11
+#define IRQ_DM9000     IRQ_EINT10
+#define IRQ_ISA	       IRQ_EINT9
+#define IRQ_SMALERT    IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
new file mode 100644
index 000000000000..29c07e302b04
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-map.h
@@ -0,0 +1,150 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-map.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  06-Jan-2003 BJD  Linux 2.6.0 version, moved bast specifics from arch/map.h
+ *  12-Mar-2004 BJD  Fixed header include protection
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
+#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
+#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
+#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
+#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1     (0x8800000)
+#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1     (0x8000000)
+#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1    (0x9800000)
+#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1    (0x9000000)
+#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2     (0xA800000)
+#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2     (0xA000000)
+#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2    (0xB800000)
+#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2    (0xB000000)
+#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO	  (0x00000000)
+#define BAST_PA_ASIXNET	  (0x01000000)
+#define BAST_PA_SUPERIO	  (0x01800000)
+#define BAST_PA_IDEPRI	  (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC	  (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM	  (0x04000000)
+#define BAST_PA_DM9000	  (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/*  */
+
+#define BAST_ASIXNET_CS  BAST_VAM_CS5
+#define BAST_IDE_CS	 BAST_VAM_CS5
+#define BAST_DM9000_CS	 BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
new file mode 100644
index 000000000000..758c5c59d4bf
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-pmu.h
@@ -0,0 +1,43 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *	08-Oct-2003	BJD	Initial creation
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT	(0x00)
+#define BASTPMU_REG_VERSION	(0x01)
+#define BASTPMU_REG_DDCCTRL	(0x02)
+#define BASTPMU_REG_POWER	(0x03)
+#define BASTPMU_REG_RESET	(0x04)
+#define BASTPMU_REG_GWO		(0x05)
+#define BASTPMU_REG_WOL		(0x06)
+#define BASTPMU_REG_WOR		(0x07)
+#define BASTPMU_REG_UID		(0x09)
+
+#define BASTPMU_EEPROM		(0xC0)
+
+#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0		0x53
+#define BASTPMU_IDENT_1		0x42
+#define BASTPMU_IDENT_2		0x50
+#define BASTPMU_IDENT_3		0x4d
+
+#define BASTPMU_RESET_GUARD	(0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
new file mode 100644
index 000000000000..abfbe45cd17c
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
+*/
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+		.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C2410_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C2410_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, # S3C2410_UTXH ]
+		.endm
+
+		.macro	busyuart, rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+		.endm
+
+		.macro	waituart,rd,rx
+
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+		.endm
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
new file mode 100644
index 000000000000..e830a40e573a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -0,0 +1,376 @@
+/* linux/include/asm-arm/arch-bast/dma.h
+ *
+ * Copyright (C) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2410X DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  ??-May-2003 BJD   Created file
+ *  ??-Jun-2003 BJD   Added more dma functionality to go with arch
+ *  10-Nov-2004 BJD   Added sys_device support
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/config.h>
+#include <linux/sysdev.h>
+#include "hardware.h"
+
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS		0x20000000
+#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+
+
+/* according to the samsung port, we cannot use the regular
+ * dma channels... we must therefore provide our own interface
+ * for DMA, and allow our drivers to use that.
+ */
+
+#define MAX_DMA_CHANNELS	0
+
+
+/* we have 4 dma channels */
+#define S3C2410_DMA_CHANNELS        (4)
+
+/* types */
+
+typedef enum {
+	S3C2410_DMA_IDLE,
+	S3C2410_DMA_RUNNING,
+	S3C2410_DMA_PAUSED
+} s3c2410_dma_state_t;
+
+
+/* s3c2410_dma_loadst_t
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+typedef enum {
+	S3C2410_DMALOAD_NONE,
+	S3C2410_DMALOAD_1LOADED,
+	S3C2410_DMALOAD_1RUNNING,
+	S3C2410_DMALOAD_1LOADED_1RUNNING,
+} s3c2410_dma_loadst_t;
+
+typedef enum {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+} s3c2410_dma_buffresult_t;
+
+
+typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t;
+
+enum s3c2410_dmasrc_e {
+	S3C2410_DMASRC_HW,      /* source is memory */
+	S3C2410_DMASRC_MEM      /* source is hardware */
+};
+
+/* enum s3c2410_chan_op_e
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op_e {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,           /* internal signal to handler */
+};
+
+typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
+					    * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+
+/* dma buffer */
+
+typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t;
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+typedef struct s3c2410_dma_client s3c2410_dma_client_t;
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf_s {
+	s3c2410_dma_buf_t   *next;
+	int                  magic;        /* magic */
+	int                  size;         /* buffer size in bytes */
+	dma_addr_t           data;         /* start of DMA data */
+	dma_addr_t           ptr;          /* where the DMA got to [1] */
+	void                *id;           /* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size,
+				   s3c2410_dma_buffresult_t result);
+
+typedef int  (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *,
+				   s3c2410_chan_op_t );
+
+struct s3c2410_dma_stats_s {
+	unsigned long          loads;
+	unsigned long          timeout_longest;
+	unsigned long          timeout_shortest;
+	unsigned long          timeout_avg;
+	unsigned long          timeout_failed;
+};
+
+typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t;
+
+/* struct s3c2410_dma_chan_s
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan_s {
+	/* channel state flags and information */
+	unsigned char          number;      /* number of this dma channel */
+	unsigned char          in_use;      /* channel allocated */
+	unsigned char          irq_claimed; /* irq claimed for channel */
+	unsigned char          irq_enabled; /* irq enabled for channel */
+	unsigned char          xfer_unit;   /* size of an transfer */
+
+	/* channel state */
+
+	s3c2410_dma_state_t    state;
+	s3c2410_dma_loadst_t   load_state;
+	s3c2410_dma_client_t  *client;
+
+	/* channel configuration */
+	s3c2410_dmasrc_t       source;
+	unsigned long          dev_addr;
+	unsigned long          load_timeout;
+	unsigned int           flags;        /* channel flags */
+
+	/* channel's hardware position and configuration */
+	void __iomem           *regs;        /* channels registers */
+	void __iomem           *addr_reg;    /* data address register */
+	unsigned int           irq;          /* channel irq */
+	unsigned long          dcon;         /* default value of DCON */
+
+	/* driver handles */
+	s3c2410_dma_cbfn_t     callback_fn;  /* buffer done callback */
+	s3c2410_dma_opfn_t     op_fn;        /* channel operation callback */
+
+	/* stats gathering */
+	s3c2410_dma_stats_t   *stats;
+	s3c2410_dma_stats_t    stats_store;
+
+	/* buffer list and information */
+	s3c2410_dma_buf_t      *curr;        /* current dma buffer */
+	s3c2410_dma_buf_t      *next;        /* next buffer to load */
+	s3c2410_dma_buf_t      *end;         /* end of queue */
+
+	/* system device */
+	struct sys_device	dev;
+};
+
+/* the currently allocated channel information */
+extern s3c2410_dma_chan_t s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+			       s3c2410_dma_client_t *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source,
+				 int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
new file mode 100644
index 000000000000..b7d4d7f4422d
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/entry-macro.S
@@ -0,0 +1,119 @@
+/*
+ * include/asm-arm/arch-s3c2410/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+
+ * Modifications:
+ *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
+ */
+
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\tmp, #S3C24XX_VA_IRQ
+		ldr	\irqnr, [ \tmp, #0x14 ]		@ get irq no
+30000:
+		teq	\irqnr, #4
+		teqne	\irqnr, #5
+		beq	1002f				@ external irq reg
+
+		@ debug check to see if interrupt reported is the same
+		@ as the offset....
+
+		teq	\irqnr, #0
+		beq	20002f
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+		mov	\irqstat, \irqstat, lsr \irqnr
+		tst	\irqstat, #1
+		bne	20002f
+
+		/* debug/warning if we get an invalud response from the
+		 * INTOFFSET register */
+#if 1
+		stmfd	r13!, { r0 - r4 , r8-r12, r14 }
+		ldr	r1,	[ \tmp, #0x14 ]		@ INTOFFSET
+		ldr	r2,	[ \tmp, #0x10 ]		@ INTPND
+		ldr	r3,	[ \tmp, #0x00 ]		@ SRCPND
+		adr	r0, 20003f
+		bl	printk
+		b	20004f
+
+20003:
+		.ascii	"<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n"
+		.byte	0
+		.align	4
+20004:
+		mov	r1, #1
+		mov	\tmp, #S3C24XX_VA_IRQ
+		ldmfd	r13!, { r0 - r4 , r8-r12, r14 }
+#endif
+
+		@ try working out interrupt number for ourselves
+		mov	\irqnr, #0
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+10021:
+		movs	\irqstat, \irqstat, lsr#1
+		bcs	30000b		@ try and re-start the proccess
+		add	\irqnr, \irqnr, #1
+		cmp	\irqnr, #32
+		ble	10021b
+
+		@ found no interrupt, set Z flag and leave
+		movs	\irqnr, #0
+		b	1001f
+
+20005:
+20002:		@ exit
+		@ we base the s3c2410x interrupts at 16 and above to allow
+		@ isa peripherals to have their standard interrupts, also
+		@ ensure that Z flag is un-set on exit
+
+		@ note, we cannot be sure if we get IRQ_EINT0 (0) that
+		@ there is simply no interrupt pending, so in all other
+		@ cases we jump to say we have found something, otherwise
+		@ we check to see if the interrupt really is assrted
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+		teq	\irqnr, #IRQ_EINT0
+		bne	1001f				@ exit
+		ldr	\irqstat, [ \tmp, #0x10 ]	@ INTPND
+		teq	\irqstat, #0
+		moveq	\irqnr, #0
+		b	1001f
+
+		@ we get here from no main or external interrupts pending
+1002:
+		add	\tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
+		ldr	\irqstat, [ \tmp, # 0xa8 ]	@ EXTINTPEND
+		ldr	\irqnr, [ \tmp, # 0xa4 ]	@ EXTINTMASK
+
+		bic	\irqstat, \irqstat, \irqnr	@ clear masked irqs
+
+		mov	\irqnr, #IRQ_EINT4		@ start extint nos
+		mov	\irqstat, \irqstat, lsr#4	@ ignore bottom 4 bits
+10021:
+		movs	\irqstat, \irqstat, lsr#1
+		bcs	1004f
+		add	\irqnr, \irqnr, #1
+		cmp	\irqnr, #IRQ_EINT23
+		ble	10021b
+
+		@ found no interrupt, set Z flag and leave
+		movs	\irqnr, #0
+
+1004:		@ ensure Z flag clear in case our MOVS shifted out the last bit
+		teq	\irqnr, #0
+1001:
+		@ exit irq routine
+		.endm
+
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
+
+
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
new file mode 100644
index 000000000000..48a39918a760
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -0,0 +1,105 @@
+/* linux/include/asm-arm/arch-s3c2410/hardware.h
+ *
+ * (c) 2003 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  21-May-2003 BJD  Created file
+ *  06-Jun-2003 BJD  Added CPU frequency settings
+ *  03-Sep-2003 BJD  Linux v2.6 support
+ *  12-Mar-2004 BJD  Fixed include protection, fixed type of clock vars
+ *  14-Sep-2004 BJD  Added misccr and getpin to gpio
+ *  01-Oct-2004 BJD  Added the new gpio functions
+ *  16-Oct-2004 BJD  Removed the clock variables
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <asm/arch/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
new file mode 100644
index 000000000000..749227c09576
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/idle.h
@@ -0,0 +1,28 @@
+/* linux/include/asm-arm/arch-s3c2410/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+ *
+ *  Changelog:
+ *	28-Oct-2004  BJD  Initial version
+ *
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h
new file mode 100644
index 000000000000..518547f6d7a7
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/iic.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-s3c2410/iic.h
+ *
+ * (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - I2C Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *	05-Oct-2004 BJD  Created file
+ *	19-Oct-2004 BJD	 Updated for s3c2440
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
+
+/* Notes:
+ *	1) All frequencies are expressed in Hz
+ *	2) A value of zero is `do not care`
+*/
+
+struct s3c2410_platform_i2c {
+	unsigned int	flags;
+	unsigned int	slave_addr;	/* slave address for controller */
+	unsigned long	bus_freq;	/* standard bus frequency */
+	unsigned long	max_freq;	/* max frequency for the bus */
+	unsigned long	min_freq;	/* min frequency for the bus */
+	unsigned int	sda_delay;	/* pclks (s3c2440 only) */
+};
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
new file mode 100644
index 000000000000..418233a7ee6f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/io.h
@@ -0,0 +1,196 @@
+/*
+ * linux/include/asm-arm/arch-s3c2410/io.h
+ *  from linux/include/asm-arm/arch-rpc/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ *  02-Sep-2003 BJD	Modified for S3C2410
+ *  10-Mar-2005 LCVR	Changed S3C2410_VA to S3C24XX_VA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));		\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));	\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, %2]	@ outwc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));	\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, %2]	@ inwc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;						\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
new file mode 100644
index 000000000000..d9773d697268
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -0,0 +1,126 @@
+/* linux/include/asm-arm/arch-s3c2410/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  12-May-2003 BJD  Created file
+ *  08-Jan-2003 BJD  Linux 2.6.0 version, moved BAST bits out
+ *  12-Mar-2004 BJD  Fixed bug in header protection
+ *  10-Feb-2005 BJD  Added camera IRQ from guillaume.gourat@nexvision.tv
+ *  28-Feb-2005 BJD  Updated s3c2440 IRQs
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
+#define IRQ_EINT5      S3C2410_IRQ(33)
+#define IRQ_EINT6      S3C2410_IRQ(34)
+#define IRQ_EINT7      S3C2410_IRQ(35)
+#define IRQ_EINT8      S3C2410_IRQ(36)
+#define IRQ_EINT9      S3C2410_IRQ(37)
+#define IRQ_EINT10     S3C2410_IRQ(38)
+#define IRQ_EINT11     S3C2410_IRQ(39)
+#define IRQ_EINT12     S3C2410_IRQ(40)
+#define IRQ_EINT13     S3C2410_IRQ(41)
+#define IRQ_EINT14     S3C2410_IRQ(42)
+#define IRQ_EINT15     S3C2410_IRQ(43)
+#define IRQ_EINT16     S3C2410_IRQ(44)
+#define IRQ_EINT17     S3C2410_IRQ(45)
+#define IRQ_EINT18     S3C2410_IRQ(46)
+#define IRQ_EINT19     S3C2410_IRQ(47)
+#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
+#define IRQ_EINT21     S3C2410_IRQ(49)
+#define IRQ_EINT22     S3C2410_IRQ(50)
+#define IRQ_EINT23     S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x)    S3C2410_IRQ((x >= 4) ? (IRQ_EINT4 + (x) - 4) : (S3C2410_IRQ(0) + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+#define IRQ_S3CUART_RX0  S3C2410_IRQ(54)   /* 70 */
+#define IRQ_S3CUART_TX0  S3C2410_IRQ(55)   /* 71 */
+#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX1  S3C2410_IRQ(57)
+#define IRQ_S3CUART_TX1  S3C2410_IRQ(58)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+
+#define IRQ_S3CUART_RX2  S3C2410_IRQ(60)
+#define IRQ_S3CUART_TX2  S3C2410_IRQ(61)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+
+#define IRQ_TC		 S3C2410_IRQ(63)
+#define IRQ_ADC		 S3C2410_IRQ(64)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQ(65)
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQ(66)
+#define IRQ_S3C2440_WDT		S3C2410_IRQ(67)
+#define IRQ_S3C2440_AC97	S3C2410_IRQ(68)
+
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
new file mode 100644
index 000000000000..1833ea5c4220
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -0,0 +1,192 @@
+/* linux/include/asm-arm/arch-s3c2410/map.h
+ *
+ * (c) 2003 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  12-May-2003 BJD   Created file
+ *  06-Jan-2003 BJD   Linux 2.6.0 version, moved bast specifics out
+ *  10-Feb-2005 BJD   Added CAMIF definition from guillaume.gourat@nexvision.tv
+ *  10-Mar-2005 LCVR  Added support to S3C2400, changed {VA,SZ} names
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+/* we have a bit of a tight squeeze to fit all our registers from
+ * 0xF00000000 upwards, since we use all of the nGCS space in some
+ * capacity, and also need to fit the S3C2410 registers in as well...
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ *
+ * Note, we are trying to remove some of these from the implementation
+ * as they are only useful to certain drivers...
+ */
+
+#ifndef __ASSEMBLY__
+#define S3C2410_ADDR(x)	  ((void __iomem *)0xF0000000 + (x))
+#else
+#define S3C2410_ADDR(x)	  (0xF0000000 + (x))
+#endif
+
+#define S3C2400_ADDR(x)	  S3C2410_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C2410_ADDR(0x00000000)
+#define S3C2400_PA_IRQ	   (0x14400000)
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000)
+#define S3C2400_PA_MEMCTRL (0x14000000)
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000)
+#define S3C2400_PA_USBHOST (0x14200000)
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C24XX_VA_DMA	   S3C2410_ADDR(0x00300000)
+#define S3C2400_PA_DMA	   (0x14600000)
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C2410_ADDR(0x00400000)
+#define S3C2400_PA_CLKPWR  (0x14800000)
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* LCD controller */
+#define S3C24XX_VA_LCD	   S3C2410_ADDR(0x00600000)
+#define S3C2400_PA_LCD	   (0x14A00000)
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C24XX_VA_NAND	   S3C2410_ADDR(0x00700000)
+#define S3C2410_PA_NAND	   (0x4E000000)
+#define S3C24XX_SZ_NAND	   SZ_1M
+
+/* MMC controller - available on the S3C2400 */
+#define S3C2400_VA_MMC 	   S3C2400_ADDR(0x00700000)
+#define S3C2400_PA_MMC 	   (0x15A00000)
+#define S3C2400_SZ_MMC 	   SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C2410_ADDR(0x00800000)
+#define S3C2400_PA_UART	   (0x15000000)
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C2410_ADDR(0x00900000)
+#define S3C2400_PA_TIMER   (0x15100000)
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* USB Device port */
+#define S3C24XX_VA_USBDEV  S3C2410_ADDR(0x00A00000)
+#define S3C2400_PA_USBDEV  (0x15200140)
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000)
+#define S3C2400_PA_WATCHDOG (0x15300000)
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C24XX_VA_IIC	   S3C2410_ADDR(0x00C00000)
+#define S3C2400_PA_IIC	   (0x15400000)
+#define S3C2410_PA_IIC	   (0x54000000)
+#define S3C24XX_SZ_IIC	   SZ_1M
+
+#define VA_IIC_BASE	   (S3C24XX_VA_IIC)
+
+/* IIS controller */
+#define S3C24XX_VA_IIS	   S3C2410_ADDR(0x00D00000)
+#define S3C2400_PA_IIS	   (0x15508000)
+#define S3C2410_PA_IIS	   (0x55000000)
+#define S3C24XX_SZ_IIS	   SZ_1M
+
+/* GPIO ports */
+#define S3C24XX_VA_GPIO	   S3C2410_ADDR(0x00E00000)
+#define S3C2400_PA_GPIO	   (0x15600000)
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+/* RTC */
+#define S3C24XX_VA_RTC	   S3C2410_ADDR(0x00F00000)
+#define S3C2400_PA_RTC	   (0x15700040)
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C24XX_VA_ADC	   S3C2410_ADDR(0x01000000)
+#define S3C2400_PA_ADC	   (0x15800000)
+#define S3C2410_PA_ADC	   (0x58000000)
+#define S3C24XX_SZ_ADC	   SZ_1M
+
+/* SPI */
+#define S3C24XX_VA_SPI	   S3C2410_ADDR(0x01100000)
+#define S3C2400_PA_SPI	   (0x15900000)
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C24XX_SZ_SPI	   SZ_1M
+
+/* SDI */
+#define S3C24XX_VA_SDI	   S3C2410_ADDR(0x01200000)
+#define S3C2410_PA_SDI	   (0x5A000000)
+#define S3C24XX_SZ_SDI	   SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+#define S3C2400_CS0 (0x00000000)
+#define S3C2400_CS1 (0x02000000)
+#define S3C2400_CS2 (0x04000000)
+#define S3C2400_CS3 (0x06000000)
+#define S3C2400_CS4 (0x08000000)
+#define S3C2400_CS5 (0x0A000000)
+#define S3C2400_CS6 (0x0C000000)
+#define S3C2400_CS7 (0x0E000000)
+
+#define S3C2400_SDRAM_PA    (S3C2400_CS6)
+
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
new file mode 100644
index 000000000000..3380ab1d0749
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/memory.h
@@ -0,0 +1,44 @@
+/*
+ *  linux/include/asm-arm/arch-s3c2410/memory.h
+ *
+ *  from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ *   05-Apr-2004 BJD    Copied and altered for arch-s3c2410
+ *   17-Mar-2005 LCVR   Modified for S3C2400
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * DRAM starts at 0x30000000 for S3C2410/S3C2440
+ * and at 0x0C000000 for S3C2400
+ */
+#ifdef CONFIG_CPU_S3C2400
+#define PHYS_OFFSET	(0x0C000000UL)
+#else
+#define PHYS_OFFSET	(0x30000000UL)
+#endif
+
+/*
+ * These are exactly the same on the S3C2410 as the
+ * physical memory view.
+*/
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h
new file mode 100644
index 000000000000..9148ac045b0d
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/nand.h
@@ -0,0 +1,48 @@
+/* linux/include/asm-arm/arch-s3c2410/nand.h
+ *
+ * (c) 2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *	23-Sep-2004 BJD  Created file
+*/
+
+/* struct s3c2410_nand_set
+ *
+ * define an set of one or more nand chips registered with an unique mtd
+ *
+ * nr_chips	 = number of chips in this set
+ * nr_partitions = number of partitions pointed to be partitoons (or zero)
+ * name		 = name of set (optional)
+ * nr_map	 = map for low-layer logical to physical chip numbers (option)
+ * partitions	 = mtd partition list
+*/
+
+struct s3c2410_nand_set {
+	int			nr_chips;
+	int			nr_partitions;
+	char			*name;
+	int			*nr_map;
+	struct mtd_partition	*partitions;
+};
+
+struct s3c2410_platform_nand {
+	/* timing information for controller, all times in nanoseconds */
+
+	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
+	int	twrph0;	/* active time for nWE/nOE */
+	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
+
+	int			nr_sets;
+	struct s3c2410_nand_set *sets;
+
+	void			(*select_chip)(struct s3c2410_nand_set *,
+					       int chip);
+};
+
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
new file mode 100644
index 000000000000..e40c93429854
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/otom-map.h
@@ -0,0 +1,30 @@
+/* linux/include/asm-arm/arch-s3c2410/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h
new file mode 100644
index 000000000000..483d3f149883
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/param.h
@@ -0,0 +1,27 @@
+/* linux/include/asm-arm/arch-s3c2410/param.h
+ *
+ * (c) 2003 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Machine parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  02-Sep-2003 BJD  Created file
+ *  12-Mar-2004 BJD  Added include protection
+*/
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+/* we cannot get our timer down to 100Hz with the setup as is, but we can
+ * manage 200 clock ticks per second... if this is a problem, we can always
+ * add a software pre-scaler to the evil timer systems.
+*/
+
+#define HZ   200
+
+#endif /* __ASM_ARCH_PARAM_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
new file mode 100644
index 000000000000..15bfc2f5754e
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -0,0 +1,63 @@
+/* linux/include/asm/arch-s3c2410/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+ *
+ *  Changelog:
+ *    27-09-2004     SAH     Created file
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+
+
+/* ADCCON Register Bits */
+#define S3C2410_ADCCON_ECFLG		(1<<15)
+#define S3C2410_ADCCON_PRSCEN		(1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2410_ADCCON_STDBM		(1<<2)
+#define S3C2410_ADCCON_READ_START	(1<<1)
+#define S3C2410_ADCCON_ENABLE_START	(1<<0)
+#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST		(0x3<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
new file mode 100644
index 000000000000..e5e938b79acc
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -0,0 +1,122 @@
+/* linux/include/asm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+ *
+ *  Changelog:
+ *    18-Aug-2004 Ben Dooks         Added 2440 definitions
+ *    08-Aug-2004 Herbert Pötzl     Added CLKCON definitions
+ *    19-06-2003  Ben Dooks         Created file
+ *    12-03-2004  Ben Dooks         Updated include protection
+ *    29-Sep-2004 Ben Dooks	    Fixed usage for assembly inclusion
+ *    10-Feb-2005 Ben Dooks	    Fixed CAMDIVN address (Guillaume Gourat)
+ *    10-Mar-2005 Lucas Villa Real  Changed S3C2410_VA to S3C24XX_VA
+ */
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT     12
+#define S3C2410_PLLCON_PDIVSHIFT     4
+#define S3C2410_PLLCON_SDIVSHIFT     0
+#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK	     3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int
+s3c2410_get_pll(int pllval, int baseclk)
+{
+	int mdiv, pdiv, sdiv;
+
+	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2410_PLLCON_MDIVMASK;
+	pdiv &= S3C2410_PLLCON_PDIVMASK;
+	sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+	return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_CPU_S3C2440
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
new file mode 100644
index 000000000000..a023b0434efe
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -0,0 +1,183 @@
+/* linux/include/asm/hardware/s3c2410/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 Signal Drive Strength Control
+ *
+ *  Changelog:
+ *    11-Aug-2004     BJD     Created file
+ *    25-Aug-2004     BJD     Added the _SELECT_* defs for using with functions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE	(1<<31)
+
+#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA  (0<<8)
+#define S3C2440_DSC0_ADDR_10mA  (1<<8)
+#define S3C2440_DSC0_ADDR_8mA   (2<<8)
+#define S3C2440_DSC0_ADDR_6mA   (3<<8)
+#define S3C2440_DSC0_ADDR_MASK  (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA  (2<<6)
+#define S3C2440_DSC0_DATA3_6mA  (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA  (2<<4)
+#define S3C2440_DSC0_DATA2_6mA  (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA  (2<<2)
+#define S3C2440_DSC0_DATA1_6mA  (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA  (2<<0)
+#define S3C2440_DSC0_DATA0_6mA  (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA  (0<<28)
+#define S3C2440_DSC1_SCK1_10mA  (1<<28)
+#define S3C2440_DSC1_SCK1_8mA   (2<<28)
+#define S3C2440_DSC1_SCK1_6mA   (3<<28)
+#define S3C2440_DSC1_SCK1_MASK  (3<<28)
+
+#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA  (0<<26)
+#define S3C2440_DSC1_SCK0_10mA  (1<<26)
+#define S3C2440_DSC1_SCK0_8mA   (2<<26)
+#define S3C2440_DSC1_SCK0_6mA   (3<<26)
+#define S3C2440_DSC1_SCK0_MASK  (3<<26)
+
+#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA  (0<<24)
+#define S3C2440_DSC1_SCKE_8mA   (1<<24)
+#define S3C2440_DSC1_SCKE_6mA   (2<<24)
+#define S3C2440_DSC1_SCKE_4mA   (3<<24)
+#define S3C2440_DSC1_SCKE_MASK  (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA   (0<<22)
+#define S3C2440_DSC1_SDR_8mA    (1<<22)
+#define S3C2440_DSC1_SDR_6mA    (2<<22)
+#define S3C2440_DSC1_SDR_4mA    (3<<22)
+#define S3C2440_DSC1_SDR_MASK   (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA   (0<<20)
+#define S3C2440_DSC1_NFC_8mA    (1<<20)
+#define S3C2440_DSC1_NFC_6mA    (2<<20)
+#define S3C2440_DSC1_NFC_4mA    (3<<20)
+#define S3C2440_DSC1_NFC_MASK   (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA   (0<<18)
+#define S3C2440_DSC1_nBE_8mA    (1<<18)
+#define S3C2440_DSC1_nBE_6mA    (2<<18)
+#define S3C2440_DSC1_nBE_4mA    (3<<18)
+#define S3C2440_DSC1_nBE_MASK   (3<<18)
+
+#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA   (0<<16)
+#define S3C2440_DSC1_WOE_8mA    (1<<16)
+#define S3C2440_DSC1_WOE_6mA    (2<<16)
+#define S3C2440_DSC1_WOE_4mA    (3<<16)
+#define S3C2440_DSC1_WOE_MASK   (3<<16)
+
+#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA   (0<<14)
+#define S3C2440_DSC1_CS7_8mA    (1<<14)
+#define S3C2440_DSC1_CS7_6mA    (2<<14)
+#define S3C2440_DSC1_CS7_4mA    (3<<14)
+#define S3C2440_DSC1_CS7_MASK   (3<<14)
+
+#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA   (0<<12)
+#define S3C2440_DSC1_CS6_8mA    (1<<12)
+#define S3C2440_DSC1_CS6_6mA    (2<<12)
+#define S3C2440_DSC1_CS6_4mA    (3<<12)
+#define S3C2440_DSC1_CS6_MASK   (3<<12)
+
+#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA   (0<<10)
+#define S3C2440_DSC1_CS5_8mA    (1<<10)
+#define S3C2440_DSC1_CS5_6mA    (2<<10)
+#define S3C2440_DSC1_CS5_4mA    (3<<10)
+#define S3C2440_DSC1_CS5_MASK   (3<<10)
+
+#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA   (0<<8)
+#define S3C2440_DSC1_CS4_8mA    (1<<8)
+#define S3C2440_DSC1_CS4_6mA    (2<<8)
+#define S3C2440_DSC1_CS4_4mA    (3<<8)
+#define S3C2440_DSC1_CS4_MASK   (3<<8)
+
+#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA   (0<<6)
+#define S3C2440_DSC1_CS3_8mA    (1<<6)
+#define S3C2440_DSC1_CS3_6mA    (2<<6)
+#define S3C2440_DSC1_CS3_4mA    (3<<6)
+#define S3C2440_DSC1_CS3_MASK   (3<<6)
+
+#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA   (0<<4)
+#define S3C2440_DSC1_CS2_8mA    (1<<4)
+#define S3C2440_DSC1_CS2_6mA    (2<<4)
+#define S3C2440_DSC1_CS2_4mA    (3<<4)
+#define S3C2440_DSC1_CS2_MASK   (3<<4)
+
+#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA   (0<<2)
+#define S3C2440_DSC1_CS1_8mA    (1<<2)
+#define S3C2440_DSC1_CS1_6mA    (2<<2)
+#define S3C2440_DSC1_CS1_4mA    (3<<2)
+#define S3C2440_DSC1_CS1_MASK   (3<<2)
+
+#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0
+#define S3C2440_DSC1_CS0_10mA   (0<<0)
+#define S3C2440_DSC1_CS0_8mA    (1<<0)
+#define S3C2440_DSC1_CS0_6mA    (2<<0)
+#define S3C2440_DSC1_CS0_4mA    (3<<0)
+#define S3C2440_DSC1_CS0_MASK   (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif	/* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
new file mode 100644
index 000000000000..2053cbacffc3
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -0,0 +1,831 @@
+/* linux/include/asm/hardware/s3c2410/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		           http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+ *
+ *  Changelog:
+ *    19-06-2003     BJD     Created file
+ *    23-06-2003     BJD     Updated GSTATUS registers
+ *    12-03-2004     BJD     Updated include protection
+ *    20-07-2004     BJD     Added GPIO pin numbers, added Port A definitions
+ *    04-10-2004     BJD     Fixed number of bugs, added EXT IRQ filter defs
+ *    17-10-2004     BJD     Added GSTATUS1 register definitions
+ *    18-11-2004     BJD     Fixed definitions of GPE3, GPE4, GPE5 and GPE6
+ *    18-11-2004     BJD     Added S3C2440 AC97 controls
+ *    10-Mar-2005    LCVR    Changed S3C2410_VA to S3C24XX_VA
+ *    28-Mar-2005    LCVR    Fixed definition of GPB10
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+
+/* configure GPIO ports A..G */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+
+/* port A - 22bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved */
+
+/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+/* no i/o pin in port b can have value 3! */
+
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP     (0x00 << 0)
+#define S3C2410_GPB0_OUTP    (0x01 << 0)
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP     (0x00 << 2)
+#define S3C2410_GPB1_OUTP    (0x01 << 2)
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP     (0x00 << 4)
+#define S3C2410_GPB2_OUTP    (0x01 << 4)
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP     (0x00 << 6)
+#define S3C2410_GPB3_OUTP    (0x01 << 6)
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP     (0x00 << 8)
+#define S3C2410_GPB4_OUTP    (0x01 << 8)
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP     (0x00 << 10)
+#define S3C2410_GPB5_OUTP    (0x01 << 10)
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP     (0x00 << 12)
+#define S3C2410_GPB6_OUTP    (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP     (0x00 << 14)
+#define S3C2410_GPB7_OUTP    (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP     (0x00 << 16)
+#define S3C2410_GPB8_OUTP    (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP     (0x00 << 18)
+#define S3C2410_GPB9_OUTP    (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP    (0x00 << 20)
+#define S3C2410_GPB10_OUTP   (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP	(0x00 << 0)
+#define S3C2410_GPC0_OUTP	(0x01 << 0)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP	(0x00 << 2)
+#define S3C2410_GPC1_OUTP	(0x01 << 2)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP	(0x00 << 4)
+#define S3C2410_GPC2_OUTP	(0x01 << 4)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP	(0x00 << 6)
+#define S3C2410_GPC3_OUTP	(0x01 << 6)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP	(0x00 << 8)
+#define S3C2410_GPC4_OUTP	(0x01 << 8)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP	(0x00 << 10)
+#define S3C2410_GPC5_OUTP	(0x01 << 10)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP	(0x00 << 12)
+#define S3C2410_GPC6_OUTP	(0x01 << 12)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP	(0x00 << 14)
+#define S3C2410_GPC7_OUTP	(0x01 << 14)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP	(0x00 << 16)
+#define S3C2410_GPC8_OUTP	(0x01 << 16)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP	(0x00 << 18)
+#define S3C2410_GPC9_OUTP	(0x01 << 18)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP	(0x00 << 20)
+#define S3C2410_GPC10_OUTP	(0x01 << 20)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP	(0x00 << 22)
+#define S3C2410_GPC11_OUTP	(0x01 << 22)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP	(0x00 << 24)
+#define S3C2410_GPC12_OUTP	(0x01 << 24)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP	(0x00 << 26)
+#define S3C2410_GPC13_OUTP	(0x01 << 26)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP	(0x00 << 28)
+#define S3C2410_GPC14_OUTP	(0x01 << 28)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP	(0x00 << 30)
+#define S3C2410_GPC15_OUTP	(0x01 << 30)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+
+/* Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP	(0x00 << 0)
+#define S3C2410_GPD0_OUTP	(0x01 << 0)
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP	(0x00 << 2)
+#define S3C2410_GPD1_OUTP	(0x01 << 2)
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP	(0x00 << 4)
+#define S3C2410_GPD2_OUTP	(0x01 << 4)
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP	(0x00 << 6)
+#define S3C2410_GPD3_OUTP	(0x01 << 6)
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP	(0x00 << 8)
+#define S3C2410_GPD4_OUTP	(0x01 << 8)
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP	(0x00 << 10)
+#define S3C2410_GPD5_OUTP	(0x01 << 10)
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP	(0x00 << 12)
+#define S3C2410_GPD6_OUTP	(0x01 << 12)
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP	(0x00 << 14)
+#define S3C2410_GPD7_OUTP	(0x01 << 14)
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP	(0x00 << 16)
+#define S3C2410_GPD8_OUTP	(0x01 << 16)
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP	(0x00 << 18)
+#define S3C2410_GPD9_OUTP	(0x01 << 18)
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP	(0x00 << 20)
+#define S3C2410_GPD10_OUTP	(0x01 << 20)
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP	(0x00 << 22)
+#define S3C2410_GPD11_OUTP	(0x01 << 22)
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP	(0x00 << 24)
+#define S3C2410_GPD12_OUTP	(0x01 << 24)
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP	(0x00 << 26)
+#define S3C2410_GPD13_OUTP	(0x01 << 26)
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP	(0x00 << 28)
+#define S3C2410_GPD14_OUTP	(0x01 << 28)
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP	(0x00 << 30)
+#define S3C2410_GPD15_OUTP	(0x01 << 30)
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+
+/* Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP       (0x00 << 0)
+#define S3C2410_GPE0_OUTP      (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP       (0x00 << 2)
+#define S3C2410_GPE1_OUTP      (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP       (0x00 << 4)
+#define S3C2410_GPE2_OUTP      (0x01 << 4)
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP       (0x00 << 6)
+#define S3C2410_GPE3_OUTP      (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP       (0x00 << 8)
+#define S3C2410_GPE4_OUTP      (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP       (0x00 << 10)
+#define S3C2410_GPE5_OUTP      (0x01 << 10)
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP       (0x00 << 12)
+#define S3C2410_GPE6_OUTP      (0x01 << 12)
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP       (0x00 << 14)
+#define S3C2410_GPE7_OUTP      (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP       (0x00 << 16)
+#define S3C2410_GPE8_OUTP      (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP       (0x00 << 18)
+#define S3C2410_GPE9_OUTP      (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP      (0x00 << 20)
+#define S3C2410_GPE10_OUTP     (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP      (0x00 << 22)
+#define S3C2410_GPE11_OUTP     (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP      (0x00 << 24)
+#define S3C2410_GPE12_OUTP     (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP      (0x00 << 26)
+#define S3C2410_GPE13_OUTP     (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP      (0x00 << 28)
+#define S3C2410_GPE14_OUTP     (0x01 << 28)
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP      (0x00 << 30)
+#define S3C2410_GPE15_OUTP     (0x01 << 30)
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP    (0x00 << 0)
+#define S3C2410_GPF0_OUTP   (0x01 << 0)
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP    (0x00 << 2)
+#define S3C2410_GPF1_OUTP   (0x01 << 2)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP    (0x00 << 4)
+#define S3C2410_GPF2_OUTP   (0x01 << 4)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP    (0x00 << 6)
+#define S3C2410_GPF3_OUTP   (0x01 << 6)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP    (0x00 << 8)
+#define S3C2410_GPF4_OUTP   (0x01 << 8)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP    (0x00 << 10)
+#define S3C2410_GPF5_OUTP   (0x01 << 10)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP    (0x00 << 12)
+#define S3C2410_GPF6_OUTP   (0x01 << 12)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP    (0x00 << 14)
+#define S3C2410_GPF7_OUTP   (0x01 << 14)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+
+/* Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP      (0x00 << 0)
+#define S3C2410_GPG0_OUTP     (0x01 << 0)
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP      (0x00 << 2)
+#define S3C2410_GPG1_OUTP     (0x01 << 2)
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP      (0x00 << 4)
+#define S3C2410_GPG2_OUTP     (0x01 << 4)
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP      (0x00 << 6)
+#define S3C2410_GPG3_OUTP     (0x01 << 6)
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP      (0x00 << 8)
+#define S3C2410_GPG4_OUTP     (0x01 << 8)
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP      (0x00 << 10)
+#define S3C2410_GPG5_OUTP     (0x01 << 10)
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP      (0x00 << 12)
+#define S3C2410_GPG6_OUTP     (0x01 << 12)
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP      (0x00 << 14)
+#define S3C2410_GPG7_OUTP     (0x01 << 14)
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP      (0x00 << 16)
+#define S3C2410_GPG8_OUTP     (0x01 << 16)
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP      (0x00 << 18)
+#define S3C2410_GPG9_OUTP     (0x01 << 18)
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP     (0x00 << 20)
+#define S3C2410_GPG10_OUTP    (0x01 << 20)
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP     (0x00 << 22)
+#define S3C2410_GPG11_OUTP    (0x01 << 22)
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+
+#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP     (0x00 << 24)
+#define S3C2410_GPG12_OUTP    (0x01 << 24)
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+
+#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP     (0x00 << 26)
+#define S3C2410_GPG13_OUTP    (0x01 << 26)
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+
+#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP     (0x00 << 28)
+#define S3C2410_GPG14_OUTP    (0x01 << 28)
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+
+#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP     (0x00 << 30)
+#define S3C2410_GPG15_OUTP    (0x01 << 30)
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP    (0x00 << 0)
+#define S3C2410_GPH0_OUTP   (0x01 << 0)
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP    (0x00 << 2)
+#define S3C2410_GPH1_OUTP   (0x01 << 2)
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP    (0x00 << 4)
+#define S3C2410_GPH2_OUTP   (0x01 << 4)
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP    (0x00 << 6)
+#define S3C2410_GPH3_OUTP   (0x01 << 6)
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP    (0x00 << 8)
+#define S3C2410_GPH4_OUTP   (0x01 << 8)
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP    (0x00 << 10)
+#define S3C2410_GPH5_OUTP   (0x01 << 10)
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP    (0x00 << 12)
+#define S3C2410_GPH6_OUTP   (0x01 << 12)
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP    (0x00 << 14)
+#define S3C2410_GPH7_OUTP   (0x01 << 14)
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP    (0x00 << 16)
+#define S3C2410_GPH8_OUTP   (0x01 << 16)
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP      (0x00 << 18)
+#define S3C2410_GPH9_OUTP     (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP     (0x00 << 20)
+#define S3C2410_GPH10_OUTP    (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* miscellaneous control */
+
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2410_MISCCR_USBDEV	    (0)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
new file mode 100644
index 000000000000..3ad2324acc39
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h
@@ -0,0 +1,101 @@
+/* linux/include/asm/hardware/s3c2410/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+ *
+ *  Changelog:
+ *    11-Aug-2004     BJD     Created file
+ *    10-Feb-2005     BJD     Fix GPJ12 definition (Guillaume Gourat)
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ  (416)
+
+#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
+
+#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP        (0x00 << 0)
+#define S3C2440_GPJ0_OUTP       (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
+
+#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP        (0x00 << 2)
+#define S3C2440_GPJ1_OUTP       (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
+
+#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP        (0x00 << 4)
+#define S3C2440_GPJ2_OUTP       (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
+
+#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP        (0x00 << 6)
+#define S3C2440_GPJ3_OUTP       (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
+
+#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP        (0x00 << 8)
+#define S3C2440_GPJ4_OUTP       (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
+
+#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP        (0x00 << 10)
+#define S3C2440_GPJ5_OUTP       (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
+
+#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP        (0x00 << 12)
+#define S3C2440_GPJ6_OUTP       (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
+
+#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP        (0x00 << 14)
+#define S3C2440_GPJ7_OUTP       (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
+
+#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP        (0x00 << 16)
+#define S3C2440_GPJ8_OUTP       (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
+
+#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP        (0x00 << 18)
+#define S3C2440_GPJ9_OUTP       (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
+
+#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP       (0x00 << 20)
+#define S3C2440_GPJ10_OUTP      (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
+
+#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP       (0x00 << 22)
+#define S3C2440_GPJ11_OUTP      (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP       (0x00 << 24)
+#define S3C2440_GPJ12_OUTP      (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
+
+#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/arch-s3c2410/regs-iic.h
new file mode 100644
index 000000000000..fed3288e2046
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-iic.h
@@ -0,0 +1,60 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 I2C Controller
+ *
+ *  Changelog:
+ *	03-Oct-2004  BJD  Initial include for Linux
+ *	08-Nov-2004  BJD  Added S3C2440 filter register
+*/
+
+#ifndef __ASM_ARCH_REGS_IIC_H
+#define __ASM_ARCH_REGS_IIC_H __FILE__
+
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN		(1<<7)
+#define S3C2410_IICCON_TXDIV_16		(0<<6)
+#define S3C2410_IICCON_TXDIV_512	(1<<6)
+#define S3C2410_IICCON_IRQEN		(1<<5)
+#define S3C2410_IICCON_IRQPEND		(1<<4)
+#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
+#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
+#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+
+#define S3C2410_IICSTAT_START		(1<<5)
+#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
+#define S3C2410_IICSTAT_TXRXEN		(1<<4)
+#define S3C2410_IICSTAT_ARBITR		(1<<3)
+#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
+#define S3C2410_IICSTAT_ADDR0		(1<<1)
+#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1<<2)
+
+#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h
new file mode 100644
index 000000000000..7ae8e1f45bc1
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-iis.h
@@ -0,0 +1,72 @@
+/* linux/include/asm/arch-s3c2410/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+ *
+ *  Changelog:
+ *    19-06-2003     BJD     Created file
+ *    26-06-2003     BJD     Finished off definitions for register addresses
+ *    12-03-2004     BJD     Updated include protection
+ *    07-03-2005     BJD     Added FIFO size flags and S3C2440 MPLL
+ */
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON	 (0x00)
+
+#define S3C2440_IISCON_MPLL	  (1<<9)
+#define S3C2410_IISCON_LRINDEX	  (1<<8)
+#define S3C2410_IISCON_TXFIFORDY  (1<<7)
+#define S3C2410_IISCON_RXFIFORDY  (1<<6)
+#define S3C2410_IISCON_TXDMAEN	  (1<<5)
+#define S3C2410_IISCON_RXDMAEN	  (1<<4)
+#define S3C2410_IISCON_TXIDLE	  (1<<3)
+#define S3C2410_IISCON_RXIDLE	  (1<<2)
+#define S3C2410_IISCON_IISEN	  (1<<0)
+
+#define S3C2410_IISMOD	 (0x04)
+
+#define S3C2410_IISMOD_SLAVE	  (1<<8)
+#define S3C2410_IISMOD_NOXFER	  (0<<6)
+#define S3C2410_IISMOD_RXMODE	  (1<<6)
+#define S3C2410_IISMOD_TXMODE	  (2<<6)
+#define S3C2410_IISMOD_TXRXMODE	  (3<<6)
+#define S3C2410_IISMOD_LR_LLOW	  (0<<5)
+#define S3C2410_IISMOD_LR_RLOW	  (1<<5)
+#define S3C2410_IISMOD_IIS	  (0<<4)
+#define S3C2410_IISMOD_MSB	  (1<<4)
+#define S3C2410_IISMOD_8BIT	  (0<<3)
+#define S3C2410_IISMOD_16BIT	  (1<<3)
+#define S3C2410_IISMOD_BITMASK	  (1<<3)
+#define S3C2410_IISMOD_256FS	  (0<<1)
+#define S3C2410_IISMOD_384FS	  (1<<1)
+#define S3C2410_IISMOD_16FS	  (0<<0)
+#define S3C2410_IISMOD_32FS	  (1<<0)
+#define S3C2410_IISMOD_48FS	  (2<<0)
+
+#define S3C2410_IISPSR		(0x08)
+#define S3C2410_IISPSR_INTMASK	(31<<5)
+#define S3C2410_IISPSR_INTSHIFT	(5)
+#define S3C2410_IISPSR_EXTMASK	(31<<0)
+#define S3C2410_IISPSR_EXTSHFIT	(0)
+
+#define S3C2410_IISFCON  (0x0c)
+
+#define S3C2410_IISFCON_TXDMA	  (1<<15)
+#define S3C2410_IISFCON_RXDMA	  (1<<14)
+#define S3C2410_IISFCON_TXENABLE  (1<<13)
+#define S3C2410_IISFCON_RXENABLE  (1<<12)
+#define S3C2410_IISFCON_TXMASK	  (0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT	  (6)
+#define S3C2410_IISFCON_RXMASK	  (0x3f)
+#define S3C2410_IISFCON_RXSHIFT	  (0)
+
+#define S3C2410_IISFIFO  (0x10)
+#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
new file mode 100644
index 000000000000..24b7292df79e
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-irq.h
@@ -0,0 +1,44 @@
+/* linux/include/asm/arch-s3c2410/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *
+ *  Changelog:
+ *    19-06-2003     BJD     Created file
+ *    12-03-2004     BJD     Updated include protection
+ *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
+ */
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
new file mode 100644
index 000000000000..7f882ea92b2a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-lcd.h
@@ -0,0 +1,114 @@
+/* linux/include/asm/arch-s3c2410/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *
+ *  Changelog:
+ *    12-06-2003     BJD     Created file
+ *    26-06-2003     BJD     Updated LCDCON register definitions
+ *    12-03-2004     BJD     Updated include protection
+ *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+
+#define S3C2410_LCDREG(x) ((x) + S3C24XX_VA_LCD)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
+
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
new file mode 100644
index 000000000000..1a1328ac0d79
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -0,0 +1,212 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ *
+ *  Changelog:
+ *	29-Sep-2004  BJD  Initial include for Linux
+ *      10-Mar-2005  LCVR Changed S3C2410_VA to S3C24XX_VA
+ *
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16		(1<<1)
+#define S3C2410_BWSCON_DW0_32		(2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8		(0<<4)
+#define S3C2410_BWSCON_DW1_16		(1<<4)
+#define S3C2410_BWSCON_DW1_32		(2<<4)
+#define S3C2410_BWSCON_WS1		(1<<6)
+#define S3C2410_BWSCON_ST1		(1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8		(0<<8)
+#define S3C2410_BWSCON_DW2_16		(1<<8)
+#define S3C2410_BWSCON_DW2_32		(2<<8)
+#define S3C2410_BWSCON_WS2		(1<<10)
+#define S3C2410_BWSCON_ST2		(1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8		(0<<12)
+#define S3C2410_BWSCON_DW3_16		(1<<12)
+#define S3C2410_BWSCON_DW3_32		(2<<12)
+#define S3C2410_BWSCON_WS3		(1<<14)
+#define S3C2410_BWSCON_ST3		(1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8		(0<<16)
+#define S3C2410_BWSCON_DW4_16		(1<<16)
+#define S3C2410_BWSCON_DW4_32		(2<<16)
+#define S3C2410_BWSCON_WS4		(1<<18)
+#define S3C2410_BWSCON_ST4		(1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8		(0<<20)
+#define S3C2410_BWSCON_DW5_16		(1<<20)
+#define S3C2410_BWSCON_DW5_32		(2<<20)
+#define S3C2410_BWSCON_WS5		(1<<22)
+#define S3C2410_BWSCON_ST5		(1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8		(0<<24)
+#define S3C2410_BWSCON_DW6_16		(1<<24)
+#define S3C2410_BWSCON_DW6_32		(2<<24)
+#define S3C2410_BWSCON_WS6		(1<<26)
+#define S3C2410_BWSCON_ST6		(1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8		(0<<28)
+#define S3C2410_BWSCON_DW7_16		(1<<28)
+#define S3C2410_BWSCON_DW7_32		(2<<28)
+#define S3C2410_BWSCON_WS7		(1<<30)
+#define S3C2410_BWSCON_ST7		(1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm		(0x00)
+#define S3C2410_BANKCON_PMC4		(0x01)
+#define S3C2410_BANKCON_PMC8		(0x02)
+#define S3C2410_BANKCON_PMC16		(0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
+#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
+#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
+#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
+
+#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
+#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
+#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
+#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
+
+#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
+
+#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
+#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
+#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
+#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
+#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
+#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
+#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
+#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
+
+#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
+#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
+#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
+#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
+
+#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
+#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
+#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
+#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
+
+#define S3C2410_BANKCON_SRAM		(0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trdc1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trdc2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trdc3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trdc4      (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trdc2		(0x00 << 2)
+#define S3C2410_BANKCON_Trdc3		(0x01 << 2)
+#define S3C2410_BANKCON_Trdc4		(0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
+#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
+#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
+
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN		(1<<23)
+#define S3C2410_REFRESH_SELF		(1<<22)
+#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK	(3<<20)
+#define S3C2410_REFRESH_TRP_2clk	(0<<20)
+#define S3C2410_REFRESH_TRP_3clk	(1<<20)
+#define S3C2410_REFRESH_TRP_4clk	(2<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
+#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
+#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
+#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
+#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
+
+
+/* mode select register(s) */
+
+#define  S3C2410_MRSRB_CL1		(0x00 << 4)
+#define  S3C2410_MRSRB_CL2		(0x02 << 4)
+#define  S3C2410_MRSRB_CL3		(0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M		(0x2 << 0)
+#define S3C2410_BANKSIZE_64M		(0x1 << 0)
+#define S3C2410_BANKSIZE_32M		(0x0 << 0)
+#define S3C2410_BANKSIZE_16M		(0x7 << 0)
+#define S3C2410_BANKSIZE_8M		(0x6 << 0)
+#define S3C2410_BANKSIZE_4M		(0x5 << 0)
+#define S3C2410_BANKSIZE_2M		(0x4 << 0)
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
+#define S3C2410_BANKSIZE_BURST		(1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h
new file mode 100644
index 000000000000..c443ac834698
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-nand.h
@@ -0,0 +1,43 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+ *
+ *  Changelog:
+ *    18-Aug-2004    BJD     Copied file from 2.4 and updated
+*/
+
+#ifndef __ASM_ARM_REGS_NAND
+#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+
+
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
+#define S3C2410_NFECC   S3C2410_NFREG(0x14)
+
+#define S3C2410_NFCONF_EN          (1<<15)
+#define S3C2410_NFCONF_512BYTE     (1<<14)
+#define S3C2410_NFCONF_4STEP       (1<<13)
+#define S3C2410_NFCONF_INITECC     (1<<12)
+#define S3C2410_NFCONF_nFCE        (1<<11)
+#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
+
+#define S3C2410_NFSTAT_BUSY        (1<<0)
+
+/* think ECC can only be 8bit read? */
+
+#endif /* __ASM_ARM_REGS_NAND */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h
new file mode 100644
index 000000000000..228983f89bc8
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-rtc.h
@@ -0,0 +1,66 @@
+/* linux/include/asm/arch-s3c2410/regs-rtc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Internal RTC register definition
+ *
+ *  Changelog:
+ *    19-06-2003     BJD     Created file
+ *    12-03-2004     BJD     Updated include protection
+ *    15-01-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
+*/
+
+#ifndef __ASM_ARCH_REGS_RTC_H
+#define __ASM_ARCH_REGS_RTC_H __FILE__
+
+#define S3C2410_RTCREG(x) ((x) + S3C24XX_VA_RTC)
+
+#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN  (1<<0)
+#define S3C2410_RTCCON_CLKSEL (1<<1)
+#define S3C2410_RTCCON_CNTSEL (1<<2)
+#define S3C2410_RTCCON_CLKRST (1<<3)
+
+#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE  (1<<7)
+
+#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN  (1<<6)
+#define S3C2410_RTCALM_YEAREN (1<<5)
+#define S3C2410_RTCALM_MONEN  (1<<4)
+#define S3C2410_RTCALM_DAYEN  (1<<3)
+#define S3C2410_RTCALM_HOUREN (1<<2)
+#define S3C2410_RTCALM_MINEN  (1<<1)
+#define S3C2410_RTCALM_SECEN  (1<<0)
+
+#define S3C2410_RTCALM_ALL \
+  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
+  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
+  S3C2410_RTCALM_SECEN
+
+
+#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
+
+#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
+
+#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
+
+#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
+#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
+
+
+#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
new file mode 100644
index 000000000000..ca9a26fbecec
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-sdi.h
@@ -0,0 +1,118 @@
+/* linux/include/asm/arch-s3c2410/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+ *
+ *  Changelog:
+ *    18-Aug-2004 Ben Dooks      Created initial file
+ *    29-Nov-2004 Koen Martens   Added some missing defines, fixed duplicates
+ *    29-Nov-2004 Ben Dooks	 Updated Koen's patch
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON                (0x00)
+#define S3C2410_SDIPRE                (0x04)
+#define S3C2410_SDICMDARG             (0x08)
+#define S3C2410_SDICMDCON             (0x0C)
+#define S3C2410_SDICMDSTAT            (0x10)
+#define S3C2410_SDIRSP0               (0x14)
+#define S3C2410_SDIRSP1               (0x18)
+#define S3C2410_SDIRSP2               (0x1C)
+#define S3C2410_SDIRSP3               (0x20)
+#define S3C2410_SDITIMER              (0x24)
+#define S3C2410_SDIBSIZE              (0x28)
+#define S3C2410_SDIDCON               (0x2C)
+#define S3C2410_SDIDCNT               (0x30)
+#define S3C2410_SDIDSTA               (0x34)
+#define S3C2410_SDIFSTA               (0x38)
+#define S3C2410_SDIDATA               (0x3C)
+#define S3C2410_SDIIMSK               (0x40)
+
+#define S3C2410_SDICON_BYTEORDER      (1<<4)
+#define S3C2410_SDICON_SDIOIRQ        (1<<3)
+#define S3C2410_SDICON_RWAITEN        (1<<2)
+#define S3C2410_SDICON_FIFORESET      (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT       (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
+#define S3C2410_SDICMDCON_INDEX       (0xff)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX      (0xff)
+
+#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
+#define S3C2410_SDIDCON_DMAEN         (1<<15)
+#define S3C2410_SDIDCON_STOP          (1<<14)
+#define S3C2410_SDIDCON_DATMODE	      (3<<12)
+#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY    (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
+
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
+#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
+
+#define S3C2410_SDIFSTA_TFDET          (1<<13)
+#define S3C2410_SDIFSTA_RFDET          (1<<12)
+#define S3C2410_SDIFSTA_TXHALF         (1<<11)
+#define S3C2410_SDIFSTA_TXEMPTY        (1<<10)
+#define S3C2410_SDIFSTA_RFLAST         (1<<9)
+#define S3C2410_SDIFSTA_RFFULL         (1<<8)
+#define S3C2410_SDIFSTA_RFHALF         (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
+#define S3C2410_SDIIMSK_READWAIT       (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
+#define S3C2410_SDIIMSK_DATACRC        (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
+#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
new file mode 100644
index 000000000000..ce1bbbaad6d3
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -0,0 +1,209 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+ *
+ *  From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ *  Adapted from:
+ *
+ *  Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Modifications:
+ *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0      (S3C24XX_VA_UART)
+#define S3C24XX_VA_UART1      (S3C24XX_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2      (S3C24XX_VA_UART + 0x8000 )
+
+#define S3C2410_PA_UART0      (S3C2410_PA_UART)
+#define S3C2410_PA_UART1      (S3C2410_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C2410_PA_UART + 0x8000 )
+
+#define S3C2410_URXH	  (0x24)
+#define S3C2410_UTXH	  (0x20)
+#define S3C2410_ULCON	  (0x00)
+#define S3C2410_UCON	  (0x04)
+#define S3C2410_UFCON	  (0x08)
+#define S3C2410_UMCON	  (0x0C)
+#define S3C2410_UBRDIV	  (0x28)
+#define S3C2410_UTRSTAT	  (0x10)
+#define S3C2410_UERSTAT	  (0x14)
+#define S3C2410_UFSTAT	  (0x18)
+#define S3C2410_UMSTAT	  (0x1C)
+
+#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5	  (0x0)
+#define S3C2410_LCON_CS6	  (0x1)
+#define S3C2410_LCON_CS7	  (0x2)
+#define S3C2410_LCON_CS8	  (0x3)
+#define S3C2410_LCON_CSMASK	  (0x3)
+
+#define S3C2410_LCON_PNONE	  (0x0)
+#define S3C2410_LCON_PEVEN	  (0x5 << 3)
+#define S3C2410_LCON_PODD	  (0x4 << 3)
+#define S3C2410_LCON_PMASK	  (0x7 << 3)
+
+#define S3C2410_LCON_STOPB	  (1<<2)
+#define S3C2410_LCON_IRM          (1<<6)
+
+#define S3C2440_UCON_CLKMASK	  (3<<10)
+#define S3C2440_UCON_PCLK	  (0<<10)
+#define S3C2440_UCON_UCLK	  (1<<10)
+#define S3C2440_UCON_PCLK2	  (2<<10)
+#define S3C2440_UCON_FCLK	  (3<<10)
+#define S3C2440_UCON2_FCLK_EN	  (1<<15)
+#define S3C2440_UCON0_DIVMASK	  (15 << 12)
+#define S3C2440_UCON1_DIVMASK	  (15 << 12)
+#define S3C2440_UCON2_DIVMASK	  (7 << 12)
+#define S3C2440_UCON_DIVSHIFT	  (12)
+
+#define S3C2410_UCON_UCLK	  (1<<10)
+#define S3C2410_UCON_SBREAK	  (1<<4)
+
+#define S3C2410_UCON_TXILEVEL	  (1<<9)
+#define S3C2410_UCON_RXILEVEL	  (1<<8)
+#define S3C2410_UCON_TXIRQMODE	  (1<<2)
+#define S3C2410_UCON_RXIRQMODE	  (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
+
+#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
+				   S3C2410_UCON_RXILEVEL  | \
+				   S3C2410_UCON_TXIRQMODE | \
+				   S3C2410_UCON_RXIRQMODE | \
+				   S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE	  (1<<0)
+#define S3C2410_UFCON_TXTRIG0	  (0<<6)
+#define S3C2410_UFCON_RXTRIG8	  (1<<4)
+#define S3C2410_UFCON_RXTRIG12	  (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1	  (0<<4)
+#define S3C2440_UFCON_RXTRIG8	  (1<<4)
+#define S3C2440_UFCON_RXTRIG16	  (2<<4)
+#define S3C2440_UFCON_RXTRIG32	  (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0	  (0<<6)
+#define S3C2440_UFCON_TXTRIG16	  (1<<6)
+#define S3C2440_UFCON_TXTRIG32	  (2<<6)
+#define S3C2440_UFCON_TXTRIG48	  (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH	  (3<<1)
+#define S3C2410_UFCON_RESETTX	  (1<<2)
+#define S3C2410_UFCON_RESETRX	  (1<<1)
+
+#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
+				   S3C2410_UFCON_TXTRIG0  | \
+				   S3C2410_UFCON_RXTRIG8 )
+
+#define	S3C2410_UMCOM_AFC	  (1<<4)
+#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
+
+#define S3C2410_UFSTAT_TXFULL	  (1<<9)
+#define S3C2410_UFSTAT_RXFULL	  (1<<8)
+#define S3C2410_UFSTAT_TXMASK	  (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT	  (4)
+#define S3C2410_UFSTAT_RXMASK	  (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT	  (0)
+
+#define S3C2440_UFSTAT_TXFULL	  (1<<14)
+#define S3C2440_UFSTAT_RXFULL	  (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT	  (8)
+#define S3C2440_UFSTAT_RXSHIFT	  (0)
+#define S3C2440_UFSTAT_TXMASK	  (63<<8)
+#define S3C2440_UFSTAT_RXMASK	  (63)
+
+#define S3C2410_UTRSTAT_TXE	  (1<<2)
+#define S3C2410_UTRSTAT_TXFE	  (1<<1)
+#define S3C2410_UTRSTAT_RXDR	  (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
+#define S3C2410_UERSTAT_FRAME	  (1<<2)
+#define S3C2410_UERSTAT_BREAK	  (1<<3)
+#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
+				   S3C2410_UERSTAT_FRAME | \
+				   S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS	  (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+	const char	*name;
+	unsigned int	 divisor;
+	unsigned int	 min_baud;
+	unsigned int	 max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+	unsigned char	   hwport;	 /* hardware port number */
+	unsigned char	   unused;
+	unsigned short	   flags;
+	unsigned long	   uart_flags;	 /* default uart flags */
+
+	unsigned long	   ucon;	 /* value of ucon for port */
+	unsigned long	   ulcon;	 /* value of ulcon for port */
+	unsigned long	   ufcon;	 /* value of ufcon for port */
+
+	struct s3c24xx_uart_clksrc *clocks;
+	unsigned int		    clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[3];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/arch-s3c2410/regs-spi.h
new file mode 100644
index 000000000000..cb502a88158b
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-spi.h
@@ -0,0 +1,56 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+ *
+ *  Changelog:
+ *    20-04-2004     KF      Created file
+ *    04-10-2004     BJD     Removed VA address (no longer mapped)
+ *			     tidied file for submission
+ */
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+
+#define S3C2410_SPCON	(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	  (2<<5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	  (1<<5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL   (0<<5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	  (1<<4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	  (1<<3)	/* Master/Slave select
+						   0: slave, 1: master */
+#define S3C2410_SPCON_CPOL_HIGH	  (1<<2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	  (0<<2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	  (1<<1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	  (0<<1)	/* Clock Phase Select */
+
+#define S3C2410_SPCON_TAGD	  (1<<0)	/* Tx auto garbage data mode */
+
+
+#define S3C2410_SPSTA	 (0x04)
+
+#define S3C2410_SPSTA_DCOL	  (1<<2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	  (1<<1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	  (1<<0)	/* Data Tx/Rx ready */
+
+
+#define S3C2410_SPPIN	 (0x08)
+
+#define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	  (1<<1)
+#define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
+
+
+#define S3C2410_SPPRE	 (0x0C)
+#define S3C2410_SPTDAT	 (0x10)
+#define S3C2410_SPRDAT	 (0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/arch-s3c2410/regs-timer.h
new file mode 100644
index 000000000000..169064e27520
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-timer.h
@@ -0,0 +1,113 @@
+/* linux/include/asm/arch-s3c2410/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+ *
+ *  Changelog:
+ *    05-06-2003     BJD     Created file
+ *    26-06-2003     BJD     Added more timer definitions to mux / control
+ *    12-03-2004     BJD     Updated include protection
+ *    10-02-2005     BJD     Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat)
+ *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+
+#define S3C2410_TIMERREG(x) (S3C24XX_VA_TIMER + (x))
+#define S3C2410_TIMERREG2(tmr,reg) S3C2410_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0	      S3C2410_TIMERREG(0x00)
+#define S3C2410_TCFG1	      S3C2410_TIMERREG(0x04)
+#define S3C2410_TCON	      S3C2410_TIMERREG(0x08)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr)    S3C2410_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr)    S3C2410_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr)    S3C2410_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD	  (1<<22)
+#define S3C2410_TCON_T4MANUALUPD  (1<<21)
+#define S3C2410_TCON_T4START	  (1<<20)
+
+#define S3C2410_TCON_T3RELOAD	  (1<<19)
+#define S3C2410_TCON_T3INVERT	  (1<<18)
+#define S3C2410_TCON_T3MANUALUPD  (1<<17)
+#define S3C2410_TCON_T3START	  (1<<16)
+
+#define S3C2410_TCON_T2RELOAD	  (1<<15)
+#define S3C2410_TCON_T2INVERT	  (1<<14)
+#define S3C2410_TCON_T2MANUALUPD  (1<<13)
+#define S3C2410_TCON_T2START	  (1<<12)
+
+#define S3C2410_TCON_T1RELOAD	  (1<<11)
+#define S3C2410_TCON_T1INVERT	  (1<<10)
+#define S3C2410_TCON_T1MANUALUPD  (1<<9)
+#define S3C2410_TCON_T1START	  (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE	  (1<<4)
+#define S3C2410_TCON_T0RELOAD	  (1<<3)
+#define S3C2410_TCON_T0INVERT	  (1<<2)
+#define S3C2410_TCON_T0MANUALUPD  (1<<1)
+#define S3C2410_TCON_T0START	  (1<<0)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
+
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h
new file mode 100644
index 000000000000..bf315b763252
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-udc.h
@@ -0,0 +1,164 @@
+/* linux/include/asm/arch-s3c2410/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ *  Changelog:
+ *    01-08-2004	Initial creation
+ *    12-09-2004	Cleanup for submission
+ *    24-10-2004	Fixed S3C2410_UDC_MAXP_REG definition
+ *    10-03-2005	Changed S3C2410_VA to S3C24XX_VA
+ */
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+
+#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+
+
+#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
+#define S3C2410_UDC_PWR_RESET		(1<<3) // R
+#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
+#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
+#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
+
+#define S3C2410_UDC_PWR_DEFAULT		0x00
+
+#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
+#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
+#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
+#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
+#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
+#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
+#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
+#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
+#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
+#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
+
+#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
+#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
+
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
+#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
+#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
+#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
+#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
+#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
+#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
+#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
+#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
+#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
+#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
+#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
+#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
+#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
+#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
+#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
+
+#define S3C2410_UDC_SETIX(x)	    \
+	__raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG);
+
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
+#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
+#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
+#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
+
+#define S3C2410_UDC_MAXP_8		(1<<0)
+#define S3C2410_UDC_MAXP_16		(1<<1)
+#define S3C2410_UDC_MAXP_32		(1<<2)
+#define S3C2410_UDC_MAXP_64		(1<<3)
+
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/regs-watchdog.h b/include/asm-arm/arch-s3c2410/regs-watchdog.h
new file mode 100644
index 000000000000..d199ca6aff22
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-watchdog.h
@@ -0,0 +1,46 @@
+/* linux/include/asm/arch-s3c2410/regs0watchdog.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Watchdog timer control
+ *
+ *  Changelog:
+ *    21-06-2003     BJD     Created file
+ *    12-03-2004     BJD     Updated include protection
+ *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef __ASM_ARCH_REGS_WATCHDOG_H
+#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+
+#define S3C2410_WDOGREG(x) ((x) + S3C24XX_VA_WATCHDOG)
+
+#define S3C2410_WTCON	   S3C2410_WDOGREG(0x00)
+#define S3C2410_WTDAT	   S3C2410_WDOGREG(0x04)
+#define S3C2410_WTCNT	   S3C2410_WDOGREG(0x08)
+
+/* the watchdog can either generate a reset pulse, or an
+ * interrupt.
+ */
+
+#define S3C2410_WTCON_RSTEN   (0x01)
+#define S3C2410_WTCON_INTEN   (1<<2)
+#define S3C2410_WTCON_ENABLE  (1<<5)
+
+#define S3C2410_WTCON_DIV16   (0<<3)
+#define S3C2410_WTCON_DIV32   (1<<3)
+#define S3C2410_WTCON_DIV64   (2<<3)
+#define S3C2410_WTCON_DIV128  (3<<3)
+
+#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
+#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
+
+#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
+
+
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
new file mode 100644
index 000000000000..9b0d85024cb4
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -0,0 +1,90 @@
+/* linux/include/asm-arm/arch-s3c2410/system.h
+ *
+ * (c) 2003 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  12-May-2003 BJD  Created file
+ *  14-May-2003 BJD  Removed idle to aid debugging
+ *  12-Jun-2003 BJD  Added reset via watchdog
+ *  04-Sep-2003 BJD  Moved to v2.6
+ *  28-Oct-2004 BJD  Added over-ride for idle, and fixed reset panic()
+ */
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/idle.h>
+
+#include <asm/arch/regs-watchdog.h>
+#include <asm/arch/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+
+void s3c24xx_default_idle(void)
+{
+	void __iomem *reg = S3C2410_CLKCON;
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(reg) | (1<<2), reg);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++) {
+		tmp += __raw_readl(reg); /* ensure loop not optimised out */
+	}
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+}
+
+static void arch_idle(void)
+{
+	if (s3c24xx_idle != NULL)
+		(s3c24xx_idle)();
+	else
+		s3c24xx_default_idle();
+}
+
+
+static void
+arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	/* put initial values into count and data */
+	__raw_writel(0x100, S3C2410_WTCNT);
+	__raw_writel(0x100, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(5000);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
new file mode 100644
index 000000000000..3558a3a750bf
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/timex.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/arch-s3c2410/timex.h
+ *
+ * (c) 2003-2005 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  02-Sep-2003 BJD  Created file
+ *  05-Jan-2004 BJD  Updated for Linux 2.6.0
+ *  22-Nov-2004 BJD  Fixed CLOCK_TICK_RATE
+ *  10-Jan-2004 BJD  Removed s3c2410_clock_tick_rate
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
new file mode 100644
index 000000000000..ad4252e27799
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -0,0 +1,158 @@
+/* linux/include/asm-arm/arch-s3c2410/uncompress.h
+ *
+ * (c) 2003 Simtec Electronics
+ *    Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  22-May-2003 BJD  Created
+ *  08-Sep-2003 BJD  Moved to linux v2.6
+ *  12-Mar-2004 BJD  Updated header protection
+ *  12-Oct-2004 BJD  Take account of debug uart configuration
+ *  15-Nov-2004 BJD  Fixed uart configuration
+ *  22-Feb-2005 BJD  Added watchdog to uncompress
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <linux/config.h>
+
+/* defines for UART registers */
+#include "asm/arch/regs-serial.h"
+#include "asm/arch/regs-gpio.h"
+#include "asm/arch/regs-watchdog.h"
+
+#include <asm/arch/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#undef S3C2410_WDOGREG
+
+#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void
+putc(char ch)
+{
+	int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+	if (ch == '\n')
+		putc('\r');    /* expand newline to \r\n */
+
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+
+			if (cpuid == S3C2410_GSTATUS1_2440) {
+				level &= S3C2440_UFSTAT_TXMASK;
+				level >>= S3C2440_UFSTAT_TXSHIFT;
+			} else {
+				level &= S3C2410_UFSTAT_TXMASK;
+				level >>= S3C2410_UFSTAT_TXSHIFT;
+			}
+
+			if (level < FIFO_MAX)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static void
+putstr(const char *ptr)
+{
+	for (; *ptr != '\0'; ptr++) {
+		putc(*ptr);
+	}
+}
+
+/* CONFIG_S3C2410_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+static void error(char *err);
+
+static void
+arch_decomp_setup(void)
+{
+	/* we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_decomp_wdog_start();
+}
+
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
new file mode 100644
index 000000000000..1cc85a096b23
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -0,0 +1,45 @@
+/* linux/include/asm-arm/arch-s3c2410/usb-control.h
+ *
+ * (c) 2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  11-Sep-2004 BJD  Created file
+ *  21-Sep-2004 BJD  Updated port info
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
new file mode 100644
index 000000000000..5fe72ad70904
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vmalloc.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
+ *
+ * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+ *
+ *  Changelog:
+ *    12-Mar-2004 BJD	Fixed header, added include protection
+ *    12=Mar-2004 BJD	Fixed VMALLOC_END definitions
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
new file mode 100644
index 000000000000..0ee373ac60d4
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+ *
+ * (c) 2003 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  25-May-2003 BJD  Created file, added CTRL1 registers
+ *  19-Mar-2004 BJD  Added VR1000 CPLD definitions
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
new file mode 100644
index 000000000000..694f7715d2da
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h
@@ -0,0 +1,30 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  06-Jan-2003 BJD  Linux 2.6.0 version
+ *  19-Mar-2004 BJD  Updates for VR1000
+ */
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC	     IRQ_EINT19
+#define IRQ_IDE0	     IRQ_EINT16
+#define IRQ_IDE1	     IRQ_EINT17
+#define IRQ_VR1000_SERIAL    IRQ_EINT12
+#define IRQ_VR1000_DM9000A   IRQ_EINT10
+#define IRQ_VR1000_DM9000N   IRQ_EINT9
+#define IRQ_SMALERT	     IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
new file mode 100644
index 000000000000..867c9355fd39
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-map.h
@@ -0,0 +1,116 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
+ *
+ * (c) 2003-2005 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ *  06-Jan-2003 BJD  Linux 2.6.0 version, split specifics from arch/map.h
+ *  12-Mar-2004 BJD  Fixed header include protection
+ *  19-Mar-2004 BJD  Copied to VR1000 machine headers.
+ *  19-Jan-2005 BJD  Updated map definitions
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <asm/arch/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
+#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
+#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
+#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
+#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	   (0x02000000)
+#define VR1000_PA_IDEPRIAUX	   (0x02800000)
+#define VR1000_PA_IDESEC	   (0x03000000)
+#define VR1000_PA_IDESECAUX	   (0x03800000)
+#define VR1000_PA_DM9000	   (0x05000000)
+
+#define VR1000_PA_SERIAL	   (0x11800000)
+#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	 VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/include/asm-arm/arch-sa1100/SA-1100.h
new file mode 100644
index 000000000000..62aaf04a3906
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/SA-1100.h
@@ -0,0 +1,2072 @@
+/*
+ *	FILE    	SA-1100.h
+ *
+ *	Version 	1.2
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	January 1998 (April 1997)
+ *	System  	StrongARM SA-1100
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of constants related to the StrongARM
+ *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ *	        	architecture version 4). This file is based on the
+ *	        	StrongARM SA-1100 data sheet version 2.2.
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1100.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * SA1100 CS line to physical address
+ */
+
+#define SA1100_CS0_PHYS	0x00000000
+#define SA1100_CS1_PHYS	0x08000000
+#define SA1100_CS2_PHYS	0x10000000
+#define SA1100_CS3_PHYS	0x18000000
+#define SA1100_CS4_PHYS	0x40000000
+#define SA1100_CS5_PHYS	0x48000000
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+/*
+ * Universal Serial Bus (USB) Device Controller (UDC) control registers
+ *
+ * Registers
+ *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control Register (read/write).
+ *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Address Register (read/write).
+ *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Output Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Input Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 0
+ *              	(read/write).
+ *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 1
+ *              	(output, read/write).
+ *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 2
+ *              	(input, read/write).
+ *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data register end-point 0
+ *              	(read/write).
+ *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Write Count register end-point 0
+ *              	(read).
+ *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data Register (read/write).
+ *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Status Register (read/write).
+ */
+
+#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
+#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
+#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
+#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
+#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
+#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
+#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
+#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
+#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
+#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
+#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */
+
+#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
+#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
+#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
+#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
+                	        	/* (disable)                       */
+#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
+                	        	/* (disable)                       */
+#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
+                	        	/* (disable)                       */
+#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
+                	        	/* (disable)                       */
+#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
+#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */
+
+#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */
+
+#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
+                	        	/* [byte]                          */
+#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
+
+#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
+                	        	/* [byte]                          */
+#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCIMP_INMAXP))
+
+#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
+#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
+#define UDCCS0_SST	0x00000004	/* Sent STall                      */
+#define UDCCS0_FST	0x00000008	/* Force STall                     */
+#define UDCCS0_DE	0x00000010	/* Data End                        */
+#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
+#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
+                	        	/* (write)                         */
+#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */
+
+#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
+                	        	/* Service request (read)          */
+#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
+#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
+#define UDCCS1_SST	0x00000008	/* Sent STall                      */
+#define UDCCS1_FST	0x00000010	/* Force STall                     */
+#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */
+
+#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
+                	        	/* Service request (read)          */
+#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */
+#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */
+#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */
+#define UDCCS2_SST	0x00000010	/* Sent STall                      */
+#define UDCCS2_FST	0x00000020	/* Force STall                     */
+
+#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */
+
+#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */
+#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */
+#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */
+#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */
+#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */
+#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         */
+
+
+/*
+ * Universal Asynchronous Receiver/Transmitter (UART) control registers
+ *
+ * Registers
+ *    Ser1UTCR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser1UTCR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser1UTCR2 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser1UTCR3 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser1UTDR  	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser1UTSR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser1UTSR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser2UTCR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser2UTCR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser2UTCR2 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser2UTCR3 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser2UTCR4 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 4
+ *              	(read/write).
+ *    Ser2UTDR  	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser2UTSR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser2UTSR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser3UTCR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser3UTCR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser3UTCR2 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser3UTCR3 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser3UTDR  	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser3UTSR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser3UTSR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fua, Tua  	Frequency, period of the UART communication.
+ */
+
+#define _UTCR0(Nb)	__REG(0x80010000 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 0 [1..3] */
+#define _UTCR1(Nb)	__REG(0x80010004 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 1 [1..3] */
+#define _UTCR2(Nb)	__REG(0x80010008 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 2 [1..3] */
+#define _UTCR3(Nb)	__REG(0x8001000C + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 3 [1..3] */
+#define _UTCR4(Nb)	__REG(0x80010010 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 4 [2] */
+#define _UTDR(Nb)	__REG(0x80010014 + ((Nb) - 1)*0x00020000)  /* UART Data Reg. [1..3] */
+#define _UTSR0(Nb)	__REG(0x8001001C + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 0 [1..3] */
+#define _UTSR1(Nb)	__REG(0x80010020 + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 1 [1..3] */
+
+#define Ser1UTCR0	_UTCR0 (1)	/* Ser. port 1 UART Control Reg. 0 */
+#define Ser1UTCR1	_UTCR1 (1)	/* Ser. port 1 UART Control Reg. 1 */
+#define Ser1UTCR2	_UTCR2 (1)	/* Ser. port 1 UART Control Reg. 2 */
+#define Ser1UTCR3	_UTCR3 (1)	/* Ser. port 1 UART Control Reg. 3 */
+#define Ser1UTDR	_UTDR (1)	/* Ser. port 1 UART Data Reg.      */
+#define Ser1UTSR0	_UTSR0 (1)	/* Ser. port 1 UART Status Reg. 0  */
+#define Ser1UTSR1	_UTSR1 (1)	/* Ser. port 1 UART Status Reg. 1  */
+
+#define Ser2UTCR0	_UTCR0 (2)	/* Ser. port 2 UART Control Reg. 0 */
+#define Ser2UTCR1	_UTCR1 (2)	/* Ser. port 2 UART Control Reg. 1 */
+#define Ser2UTCR2	_UTCR2 (2)	/* Ser. port 2 UART Control Reg. 2 */
+#define Ser2UTCR3	_UTCR3 (2)	/* Ser. port 2 UART Control Reg. 3 */
+#define Ser2UTCR4	_UTCR4 (2)	/* Ser. port 2 UART Control Reg. 4 */
+#define Ser2UTDR	_UTDR (2)	/* Ser. port 2 UART Data Reg.      */
+#define Ser2UTSR0	_UTSR0 (2)	/* Ser. port 2 UART Status Reg. 0  */
+#define Ser2UTSR1	_UTSR1 (2)	/* Ser. port 2 UART Status Reg. 1  */
+
+#define Ser3UTCR0	_UTCR0 (3)	/* Ser. port 3 UART Control Reg. 0 */
+#define Ser3UTCR1	_UTCR1 (3)	/* Ser. port 3 UART Control Reg. 1 */
+#define Ser3UTCR2	_UTCR2 (3)	/* Ser. port 3 UART Control Reg. 2 */
+#define Ser3UTCR3	_UTCR3 (3)	/* Ser. port 3 UART Control Reg. 3 */
+#define Ser3UTDR	_UTDR (3)	/* Ser. port 3 UART Data Reg.      */
+#define Ser3UTSR0	_UTSR0 (3)	/* Ser. port 3 UART Status Reg. 0  */
+#define Ser3UTSR1	_UTSR1 (3)	/* Ser. port 3 UART Status Reg. 1  */
+
+/* Those are still used in some places */
+#define _Ser1UTCR0	__PREG(Ser1UTCR0)
+#define _Ser2UTCR0	__PREG(Ser2UTCR0)
+#define _Ser3UTCR0	__PREG(Ser3UTCR0)
+
+/* Register offsets */
+#define UTCR0		0x00
+#define UTCR1		0x04
+#define UTCR2		0x08
+#define UTCR3		0x0c
+#define UTDR		0x14
+#define UTSR0		0x1c
+#define UTSR1		0x20
+
+#define UTCR0_PE	0x00000001	/* Parity Enable                   */
+#define UTCR0_OES	0x00000002	/* Odd/Even parity Select          */
+#define UTCR0_OddPar	(UTCR0_OES*0)	/*  Odd Parity                     */
+#define UTCR0_EvenPar	(UTCR0_OES*1)	/*  Even Parity                    */
+#define UTCR0_SBS	0x00000004	/* Stop Bit Select                 */
+#define UTCR0_1StpBit	(UTCR0_SBS*0)	/*  1 Stop Bit per frame           */
+#define UTCR0_2StpBit	(UTCR0_SBS*1)	/*  2 Stop Bits per frame          */
+#define UTCR0_DSS	0x00000008	/* Data Size Select                */
+#define UTCR0_7BitData	(UTCR0_DSS*0)	/*  7-Bit Data                     */
+#define UTCR0_8BitData	(UTCR0_DSS*1)	/*  8-Bit Data                     */
+#define UTCR0_SCE	0x00000010	/* Sample Clock Enable             */
+                	        	/* (ser. port 1: GPIO [18],        */
+                	        	/* ser. port 3: GPIO [20])         */
+#define UTCR0_RCE	0x00000020	/* Receive Clock Edge select       */
+#define UTCR0_RcRsEdg	(UTCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define UTCR0_RcFlEdg	(UTCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define UTCR0_TCE	0x00000040	/* Transmit Clock Edge select      */
+#define UTCR0_TrRsEdg	(UTCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define UTCR0_TrFlEdg	(UTCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+#define UTCR0_Ser2IrDA	        	/* Ser. port 2 IrDA settings       */ \
+                	(UTCR0_1StpBit + UTCR0_8BitData)
+
+#define UTCR1_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define UTCR2_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fua = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tua = 16*(BRD [11:0] + 1)*Txtl  */
+#define UTCR1_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tua = 16*Floor (Div/16)*Txtl   */
+#define UTCR1_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tua = 16*Ceil (Div/16)*Txtl    */
+
+#define UTCR3_RXE	0x00000001	/* Receive Enable                  */
+#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
+#define UTCR3_BRK	0x00000004	/* BReaK mode                      */
+#define UTCR3_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define UTCR3_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define UTCR3_LBM	0x00000020	/* Look-Back Mode                  */
+#define UTCR3_Ser2IrDA	        	/* Ser. port 2 IrDA settings (RIE, */ \
+                	        	/* TIE, LBM can be set or cleared) */ \
+                	(UTCR3_RXE + UTCR3_TXE)
+
+#define UTCR4_HSE	0x00000001	/* Hewlett-Packard Serial InfraRed */
+                	        	/* (HP-SIR) modulation Enable      */
+#define UTCR4_NRZ	(UTCR4_HSE*0)	/*  Non-Return to Zero modulation  */
+#define UTCR4_HPSIR	(UTCR4_HSE*1)	/*  HP-SIR modulation              */
+#define UTCR4_LPM	0x00000002	/* Low-Power Mode                  */
+#define UTCR4_Z3_16Bit	(UTCR4_LPM*0)	/*  Zero pulse = 3/16 Bit time     */
+#define UTCR4_Z1_6us	(UTCR4_LPM*1)	/*  Zero pulse = 1.6 us            */
+
+#define UTDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define UTDR_PRE	0x00000100	/*  receive PaRity Error (read)    */
+#define UTDR_FRE	0x00000200	/*  receive FRaming Error (read)   */
+#define UTDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define UTSR0_TFS	0x00000001	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define UTSR0_RFS	0x00000002	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+#define UTSR0_RID	0x00000004	/* Receiver IDle                   */
+#define UTSR0_RBB	0x00000008	/* Receive Beginning of Break      */
+#define UTSR0_REB	0x00000010	/* Receive End of Break            */
+#define UTSR0_EIF	0x00000020	/* Error In FIFO (read)            */
+
+#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
+#define UTSR1_RNE	0x00000002	/* Receive FIFO Not Empty (read)   */
+#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
+#define UTSR1_PRE	0x00000008	/* receive PaRity Error (read)     */
+#define UTSR1_FRE	0x00000010	/* receive FRaming Error (read)    */
+#define UTSR1_ROR	0x00000020	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * Synchronous Data Link Controller (SDLC) control registers
+ *
+ * Registers
+ *    Ser1SDCR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 0 (read/write).
+ *    Ser1SDCR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 1 (read/write).
+ *    Ser1SDCR2 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 2 (read/write).
+ *    Ser1SDCR3 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 3 (read/write).
+ *    Ser1SDCR4 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 4 (read/write).
+ *    Ser1SDDR  	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Data Register (read/write).
+ *    Ser1SDSR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 0 (read/write).
+ *    Ser1SDSR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 1 (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fsd, Tsd  	Frequency, period of the SDLC communication.
+ */
+
+#define Ser1SDCR0	__REG(0x80020060)  /* Ser. port 1 SDLC Control Reg. 0 */
+#define Ser1SDCR1	__REG(0x80020064)  /* Ser. port 1 SDLC Control Reg. 1 */
+#define Ser1SDCR2	__REG(0x80020068)  /* Ser. port 1 SDLC Control Reg. 2 */
+#define Ser1SDCR3	__REG(0x8002006C)  /* Ser. port 1 SDLC Control Reg. 3 */
+#define Ser1SDCR4	__REG(0x80020070)  /* Ser. port 1 SDLC Control Reg. 4 */
+#define Ser1SDDR	__REG(0x80020078)  /* Ser. port 1 SDLC Data Reg.      */
+#define Ser1SDSR0	__REG(0x80020080)  /* Ser. port 1 SDLC Status Reg. 0  */
+#define Ser1SDSR1	__REG(0x80020084)  /* Ser. port 1 SDLC Status Reg. 1  */
+
+#define SDCR0_SUS	0x00000001	/* SDLC/UART Select                */
+#define SDCR0_SDLC	(SDCR0_SUS*0)	/*  SDLC mode (TXD1 & RXD1)        */
+#define SDCR0_UART	(SDCR0_SUS*1)	/*  UART mode (TXD1 & RXD1)        */
+#define SDCR0_SDF	0x00000002	/* Single/Double start Flag select */
+#define SDCR0_SglFlg	(SDCR0_SDF*0)	/*  Single start Flag              */
+#define SDCR0_DblFlg	(SDCR0_SDF*1)	/*  Double start Flag              */
+#define SDCR0_LBM	0x00000004	/* Look-Back Mode                  */
+#define SDCR0_BMS	0x00000008	/* Bit Modulation Select           */
+#define SDCR0_FM0	(SDCR0_BMS*0)	/*  Freq. Modulation zero (0)      */
+#define SDCR0_NRZ	(SDCR0_BMS*1)	/*  Non-Return to Zero modulation  */
+#define SDCR0_SCE	0x00000010	/* Sample Clock Enable (GPIO [16]) */
+#define SDCR0_SCD	0x00000020	/* Sample Clock Direction select   */
+                	        	/* (GPIO [16])                     */
+#define SDCR0_SClkIn	(SDCR0_SCD*0)	/*  Sample Clock Input             */
+#define SDCR0_SClkOut	(SDCR0_SCD*1)	/*  Sample Clock Output            */
+#define SDCR0_RCE	0x00000040	/* Receive Clock Edge select       */
+#define SDCR0_RcRsEdg	(SDCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define SDCR0_RcFlEdg	(SDCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define SDCR0_TCE	0x00000080	/* Transmit Clock Edge select      */
+#define SDCR0_TrRsEdg	(SDCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define SDCR0_TrFlEdg	(SDCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+
+#define SDCR1_AAF	0x00000001	/* Abort After Frame enable        */
+                	        	/* (GPIO [17])                     */
+#define SDCR1_TXE	0x00000002	/* Transmit Enable                 */
+#define SDCR1_RXE	0x00000004	/* Receive Enable                  */
+#define SDCR1_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define SDCR1_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SDCR1_AME	0x00000020	/* Address Match Enable            */
+#define SDCR1_TUS	0x00000040	/* Transmit FIFO Under-run Select  */
+#define SDCR1_EFrmURn	(SDCR1_TUS*0)	/*  End Frame on Under-Run         */
+#define SDCR1_AbortURn	(SDCR1_TUS*1)	/*  Abort on Under-Run             */
+#define SDCR1_RAE	0x00000080	/* Receive Abort interrupt Enable  */
+
+#define SDCR2_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define SDCR3_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define SDCR4_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tsd = 16*(BRD[11:0] + 1)*Txtl   */
+#define SDCR3_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tsd = 16*Floor (Div/16)*Txtl   */
+#define SDCR3_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tsd = 16*Ceil (Div/16)*Txtl    */
+
+#define SDDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define SDDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define SDDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define SDDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define SDSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define SDSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define SDSR0_RAB	0x00000004	/* Receive ABort                   */
+#define SDSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SDSR0_RFS	0x00000010	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+
+#define SDSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define SDSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define SDSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SDSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define SDSR1_RTD	0x00000010	/* Receive Transition Detected     */
+#define SDSR1_EOF	0x00000020	/* receive End-Of-Frame (read)     */
+#define SDSR1_CRE	0x00000040	/* receive CRC Error (read)        */
+#define SDSR1_ROR	0x00000080	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * High-Speed Serial to Parallel controller (HSSP) control registers
+ *
+ * Registers
+ *    Ser2HSCR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 0 (read/write).
+ *    Ser2HSCR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 1 (read/write).
+ *    Ser2HSDR  	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Data Register (read/write).
+ *    Ser2HSSR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 0 (read/write).
+ *    Ser2HSSR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 1 (read).
+ *    Ser2HSCR2 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 2 (read/write).
+ *              	[The HSCR2 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ */
+
+#define Ser2HSCR0	__REG(0x80040060)  /* Ser. port 2 HSSP Control Reg. 0 */
+#define Ser2HSCR1	__REG(0x80040064)  /* Ser. port 2 HSSP Control Reg. 1 */
+#define Ser2HSDR	__REG(0x8004006C)  /* Ser. port 2 HSSP Data Reg.      */
+#define Ser2HSSR0	__REG(0x80040074)  /* Ser. port 2 HSSP Status Reg. 0  */
+#define Ser2HSSR1	__REG(0x80040078)  /* Ser. port 2 HSSP Status Reg. 1  */
+#define Ser2HSCR2	__REG(0x90060028)  /* Ser. port 2 HSSP Control Reg. 2 */
+
+#define HSCR0_ITR	0x00000001	/* IrDA Transmission Rate          */
+#define HSCR0_UART	(HSCR0_ITR*0)	/*  UART mode (115.2 kb/s if IrDA) */
+#define HSCR0_HSSP	(HSCR0_ITR*1)	/*  HSSP mode (4 Mb/s)             */
+#define HSCR0_LBM	0x00000002	/* Look-Back Mode                  */
+#define HSCR0_TUS	0x00000004	/* Transmit FIFO Under-run Select  */
+#define HSCR0_EFrmURn	(HSCR0_TUS*0)	/*  End Frame on Under-Run         */
+#define HSCR0_AbortURn	(HSCR0_TUS*1)	/*  Abort on Under-Run             */
+#define HSCR0_TXE	0x00000008	/* Transmit Enable                 */
+#define HSCR0_RXE	0x00000010	/* Receive Enable                  */
+#define HSCR0_RIE	0x00000020	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Interrupt Enable           */
+#define HSCR0_TIE	0x00000040	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define HSCR0_AME	0x00000080	/* Address Match Enable            */
+
+#define HSCR1_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define HSDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define HSDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define HSDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define HSDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define HSSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define HSSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define HSSR0_RAB	0x00000004	/* Receive ABort                   */
+#define HSSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define HSSR0_RFS	0x00000010	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Service request (read)     */
+#define HSSR0_FRE	0x00000020	/* receive FRaming Error           */
+
+#define HSSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define HSSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define HSSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define HSSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define HSSR1_EOF	0x00000010	/* receive End-Of-Frame (read)     */
+#define HSSR1_CRE	0x00000020	/* receive CRC Error (read)        */
+#define HSSR1_ROR	0x00000040	/* Receive FIFO Over-Run (read)    */
+
+#define HSCR2_TXP	0x00040000	/* Transmit data Polarity (TXD_2)  */
+#define HSCR2_TrDataL	(HSCR2_TXP*0)	/*  Transmit Data active Low       */
+                	        	/*  (inverted)                     */
+#define HSCR2_TrDataH	(HSCR2_TXP*1)	/*  Transmit Data active High      */
+                	        	/*  (non-inverted)                 */
+#define HSCR2_RXP	0x00080000	/* Receive data Polarity (RXD_2)   */
+#define HSCR2_RcDataL	(HSCR2_RXP*0)	/*  Receive Data active Low        */
+                	        	/*  (inverted)                     */
+#define HSCR2_RcDataH	(HSCR2_RXP*1)	/*  Receive Data active High       */
+                	        	/*  (non-inverted)                 */
+
+
+/*
+ * Multi-media Communications Port (MCP) control registers
+ *
+ * Registers
+ *    Ser4MCCR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 0 (read/write).
+ *    Ser4MCDR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 0 (audio, read/write).
+ *    Ser4MCDR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 1 (telecom, read/write).
+ *    Ser4MCDR2 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 2 (CODEC registers, read/write).
+ *    Ser4MCSR  	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Status Register (read/write).
+ *    Ser4MCCR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 1 (read/write).
+ *              	[The MCCR1 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *
+ * Clocks
+ *    fmc, Tmc  	Frequency, period of the MCP communication (10 MHz,
+ *              	12 MHz, or GPIO [21]).
+ *    faud, Taud	Frequency, period of the audio sampling.
+ *    ftcm, Ttcm	Frequency, period of the telecom sampling.
+ */
+
+#define Ser4MCCR0	__REG(0x80060000)  /* Ser. port 4 MCP Control Reg. 0 */
+#define Ser4MCDR0	__REG(0x80060008)  /* Ser. port 4 MCP Data Reg. 0 (audio) */
+#define Ser4MCDR1	__REG(0x8006000C)  /* Ser. port 4 MCP Data Reg. 1 (telecom) */
+#define Ser4MCDR2	__REG(0x80060010)  /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
+#define Ser4MCSR	__REG(0x80060018)  /* Ser. port 4 MCP Status Reg. */
+#define Ser4MCCR1	__REG(0x90060030)  /* Ser. port 4 MCP Control Reg. 1 */
+
+#define MCCR0_ASD	Fld (7, 0)	/* Audio Sampling rate Divisor/32  */
+                	        	/* [6..127]                        */
+                	        	/* faud = fmc/(32*ASD)             */
+                	        	/* Taud = 32*ASD*Tmc               */
+#define MCCR0_AudSmpDiv(Div)    	/*  Audio Sampling rate Divisor    */ \
+                	        	/*  [192..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Floor (Div/32)) */
+                	        	/*  Taud = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilAudSmpDiv(Div)	/*  Ceil. of AudSmpDiv [192..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Taud = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_TSD	Fld (7, 8)	/* Telecom Sampling rate           */
+                	        	/* Divisor/32 [16..127]            */
+                	        	/* ftcm = fmc/(32*TSD)             */
+                	        	/* Ttcm = 32*TSD*Tmc               */
+#define MCCR0_TcmSmpDiv(Div)    	/*  Telecom Sampling rate Divisor  */ \
+                	        	/*  [512..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Floor (Div/32)) */
+                	        	/*  Ttcm = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilTcmSmpDiv(Div)	/*  Ceil. of TcmSmpDiv [512..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Ttcm = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_MCE	0x00010000	/* MCP Enable                      */
+#define MCCR0_ECS	0x00020000	/* External Clock Select           */
+#define MCCR0_IntClk	(MCCR0_ECS*0)	/*  Internal Clock (10 or 12 MHz)  */
+#define MCCR0_ExtClk	(MCCR0_ECS*1)	/*  External Clock (GPIO [21])     */
+#define MCCR0_ADM	0x00040000	/* A/D (audio/telecom) data        */
+                	        	/* sampling/storing Mode           */
+#define MCCR0_VldBit	(MCCR0_ADM*0)	/*  Valid Bit storing mode         */
+#define MCCR0_SmpCnt	(MCCR0_ADM*1)	/*  Sampling Counter storing mode  */
+#define MCCR0_TTE	0x00080000	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_TRE	0x00100000	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more interrupt Enable        */
+#define MCCR0_ATE	0x00200000	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_ARE	0x00400000	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more interrupt Enable           */
+#define MCCR0_LBM	0x00800000	/* Look-Back Mode                  */
+#define MCCR0_ECP	Fld (2, 24)	/* External Clock Prescaler - 1    */
+#define MCCR0_ExtClkDiv(Div)    	/*  External Clock Divisor [1..4]  */ \
+                	(((Div) - 1) << FShft (MCCR0_ECP))
+
+#define MCDR0_DATA	Fld (12, 4)	/* receive/transmit audio DATA     */
+                	        	/* FIFOs                           */
+
+#define MCDR1_DATA	Fld (14, 2)	/* receive/transmit telecom DATA   */
+                	        	/* FIFOs                           */
+
+                	        	/* receive/transmit CODEC reg.     */
+                	        	/* FIFOs:                          */
+#define MCDR2_DATA	Fld (16, 0)	/*  reg. DATA                      */
+#define MCDR2_RW	0x00010000	/*  reg. Read/Write (transmit)     */
+#define MCDR2_Rd	(MCDR2_RW*0)	/*   reg. Read                     */
+#define MCDR2_Wr	(MCDR2_RW*1)	/*   reg. Write                    */
+#define MCDR2_ADD	Fld (4, 17)	/*  reg. ADDress                   */
+
+#define MCSR_ATS	0x00000001	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less Service request (read)  */
+#define MCSR_ARS	0x00000002	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more Service request (read)     */
+#define MCSR_TTS	0x00000004	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less Service request (read)  */
+#define MCSR_TRS	0x00000008	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more Service request (read)  */
+#define MCSR_ATU	0x00000010	/* Audio Transmit FIFO Under-run   */
+#define MCSR_ARO	0x00000020	/* Audio Receive FIFO Over-run     */
+#define MCSR_TTU	0x00000040	/* Telecom Transmit FIFO Under-run */
+#define MCSR_TRO	0x00000080	/* Telecom Receive FIFO Over-run   */
+#define MCSR_ANF	0x00000100	/* Audio transmit FIFO Not Full    */
+                	        	/* (read)                          */
+#define MCSR_ANE	0x00000200	/* Audio receive FIFO Not Empty    */
+                	        	/* (read)                          */
+#define MCSR_TNF	0x00000400	/* Telecom transmit FIFO Not Full  */
+                	        	/* (read)                          */
+#define MCSR_TNE	0x00000800	/* Telecom receive FIFO Not Empty  */
+                	        	/* (read)                          */
+#define MCSR_CWC	0x00001000	/* CODEC register Write Completed  */
+                	        	/* (read)                          */
+#define MCSR_CRC	0x00002000	/* CODEC register Read Completed   */
+                	        	/* (read)                          */
+#define MCSR_ACE	0x00004000	/* Audio CODEC Enabled (read)      */
+#define MCSR_TCE	0x00008000	/* Telecom CODEC Enabled (read)    */
+
+#define MCCR1_CFS	0x00100000	/* Clock Freq. Select              */
+#define MCCR1_F12MHz	(MCCR1_CFS*0)	/*  Freq. (fmc) = ~ 12 MHz         */
+                	        	/*  (11.981 MHz)                   */
+#define MCCR1_F10MHz	(MCCR1_CFS*1)	/*  Freq. (fmc) = ~ 10 MHz         */
+                	        	/*  (9.585 MHz)                    */
+
+
+/*
+ * Synchronous Serial Port (SSP) control registers
+ *
+ * Registers
+ *    Ser4SSCR0 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 0 (read/write).
+ *    Ser4SSCR1 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 1 (read/write).
+ *              	[Bits SPO and SP are only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    Ser4SSDR  	Serial port 4 Synchronous Serial Port (SSP) Data
+ *              	Register (read/write).
+ *    Ser4SSSR  	Serial port 4 Synchronous Serial Port (SSP) Status
+ *              	Register (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fss, Tss  	Frequency, period of the SSP communication.
+ */
+
+#define Ser4SSCR0	__REG(0x80070060)  /* Ser. port 4 SSP Control Reg. 0 */
+#define Ser4SSCR1	__REG(0x80070064)  /* Ser. port 4 SSP Control Reg. 1 */
+#define Ser4SSDR	__REG(0x8007006C)  /* Ser. port 4 SSP Data Reg. */
+#define Ser4SSSR	__REG(0x80070074)  /* Ser. port 4 SSP Status Reg. */
+
+#define SSCR0_DSS	Fld (4, 0)	/* Data Size - 1 Select [3..15]    */
+#define SSCR0_DataSize(Size)    	/*  Data Size Select [4..16]       */ \
+                	(((Size) - 1) << FShft (SSCR0_DSS))
+#define SSCR0_FRF	Fld (2, 4)	/* FRame Format                    */
+#define SSCR0_Motorola	        	/*  Motorola Serial Peripheral     */ \
+                	        	/*  Interface (SPI) format         */ \
+                	(0 << FShft (SSCR0_FRF))
+#define SSCR0_TI	        	/*  Texas Instruments Synchronous  */ \
+                	        	/*  Serial format                  */ \
+                	(1 << FShft (SSCR0_FRF))
+#define SSCR0_National	        	/*  National Microwire format      */ \
+                	(2 << FShft (SSCR0_FRF))
+#define SSCR0_SSE	0x00000080	/* SSP Enable                      */
+#define SSCR0_SCR	Fld (8, 8)	/* Serial Clock Rate divisor/2 - 1 */
+                	        	/* fss = fxtl/(2*(SCR + 1))        */
+                	        	/* Tss = 2*(SCR + 1)*Txtl          */
+#define SSCR0_SerClkDiv(Div)    	/*  Serial Clock Divisor [2..512]  */ \
+                	(((Div) - 2)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Floor (Div/2))   */
+                	        	/*  Tss = 2*Floor (Div/2)*Txtl     */
+#define SSCR0_CeilSerClkDiv(Div)	/*  Ceil. of SerClkDiv [2..512]    */ \
+                	(((Div) - 1)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Ceil (Div/2))    */
+                	        	/*  Tss = 2*Ceil (Div/2)*Txtl      */
+
+#define SSCR1_RIE	0x00000001	/* Receive FIFO 1/2-full or more   */
+                	        	/* Interrupt Enable                */
+#define SSCR1_TIE	0x00000002	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SSCR1_LBM	0x00000004	/* Look-Back Mode                  */
+#define SSCR1_SPO	0x00000008	/* Sample clock (SCLK) POlarity    */
+#define SSCR1_SClkIactL	(SSCR1_SPO*0)	/*  Sample Clock Inactive Low      */
+#define SSCR1_SClkIactH	(SSCR1_SPO*1)	/*  Sample Clock Inactive High     */
+#define SSCR1_SP	0x00000010	/* Sample clock (SCLK) Phase       */
+#define SSCR1_SClk1P	(SSCR1_SP*0)	/*  Sample Clock active 1 Period   */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_SClk1_2P	(SSCR1_SP*1)	/*  Sample Clock active 1/2 Period */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_ECS	0x00000020	/* External Clock Select           */
+#define SSCR1_IntClk	(SSCR1_ECS*0)	/*  Internal Clock                 */
+#define SSCR1_ExtClk	(SSCR1_ECS*1)	/*  External Clock (GPIO [19])     */
+
+#define SSDR_DATA	Fld (16, 0)	/* receive/transmit DATA FIFOs     */
+
+#define SSSR_TNF	0x00000002	/* Transmit FIFO Not Full (read)   */
+#define SSSR_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SSSR_BSY	0x00000008	/* SSP BuSY (read)                 */
+#define SSSR_TFS	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SSSR_RFS	0x00000020	/* Receive FIFO 1/2-full or more   */
+                	        	/* Service request (read)          */
+#define SSSR_ROR	0x00000040	/* Receive FIFO Over-Run           */
+
+
+/*
+ * Operating System (OS) timer control registers
+ *
+ * Registers
+ *    OSMR0     	Operating System (OS) timer Match Register 0
+ *              	(read/write).
+ *    OSMR1     	Operating System (OS) timer Match Register 1
+ *              	(read/write).
+ *    OSMR2     	Operating System (OS) timer Match Register 2
+ *              	(read/write).
+ *    OSMR3     	Operating System (OS) timer Match Register 3
+ *              	(read/write).
+ *    OSCR      	Operating System (OS) timer Counter Register
+ *              	(read/write).
+ *    OSSR      	Operating System (OS) timer Status Register
+ *              	(read/write).
+ *    OWER      	Operating System (OS) timer Watch-dog Enable Register
+ *              	(read/write).
+ *    OIER      	Operating System (OS) timer Interrupt Enable Register
+ *              	(read/write).
+ */
+
+#define OSMR0  		__REG(0x90000000)  /* OS timer Match Reg. 0 */
+#define OSMR1  		__REG(0x90000004)  /* OS timer Match Reg. 1 */
+#define OSMR2  		__REG(0x90000008)  /* OS timer Match Reg. 2 */
+#define OSMR3  		__REG(0x9000000c)  /* OS timer Match Reg. 3 */
+#define OSCR   	__REG(0x90000010)  /* OS timer Counter Reg. */
+#define OSSR   	__REG(0x90000014	)  /* OS timer Status Reg. */
+#define OWER   	__REG(0x90000018	)  /* OS timer Watch-dog Enable Reg. */
+#define OIER   	__REG(0x9000001C	)  /* OS timer Interrupt Enable Reg. */
+
+#define OSSR_M(Nb)	        	/* Match detected [0..3]           */ \
+                	(0x00000001 << (Nb))
+#define OSSR_M0 	OSSR_M (0)	/* Match detected 0                */
+#define OSSR_M1 	OSSR_M (1)	/* Match detected 1                */
+#define OSSR_M2 	OSSR_M (2)	/* Match detected 2                */
+#define OSSR_M3 	OSSR_M (3)	/* Match detected 3                */
+
+#define OWER_WME	0x00000001	/* Watch-dog Match Enable          */
+                	        	/* (set only)                      */
+
+#define OIER_E(Nb)	        	/* match interrupt Enable [0..3]   */ \
+                	(0x00000001 << (Nb))
+#define OIER_E0 	OIER_E (0)	/* match interrupt Enable 0        */
+#define OIER_E1 	OIER_E (1)	/* match interrupt Enable 1        */
+#define OIER_E2 	OIER_E (2)	/* match interrupt Enable 2        */
+#define OIER_E3 	OIER_E (3)	/* match interrupt Enable 3        */
+
+
+/*
+ * Real-Time Clock (RTC) control registers
+ *
+ * Registers
+ *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
+ *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
+ *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
+ *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
+ *
+ * Clocks
+ *    frtx, Trtx	Frequency, period of the real-time clock crystal
+ *              	(32.768 kHz nominal).
+ *    frtc, Trtc	Frequency, period of the real-time clock counter
+ *              	(1 Hz nominal).
+ */
+
+#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
+#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
+#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
+#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
+
+#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
+#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
+                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
+                	        	/*        (1023*(C + 1)^2)         */
+                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
+                	        	/*        (1023*(C + 1) - D)       */
+
+#define RTSR_AL 	0x00000001	/* ALarm detected                  */
+#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
+#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
+#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
+
+
+/*
+ * Power Manager (PM) control registers
+ *
+ * Registers
+ *    PMCR      	Power Manager (PM) Control Register (read/write).
+ *    PSSR      	Power Manager (PM) Sleep Status Register (read/write).
+ *    PSPR      	Power Manager (PM) Scratch-Pad Register (read/write).
+ *    PWER      	Power Manager (PM) Wake-up Enable Register
+ *              	(read/write).
+ *    PCFR      	Power Manager (PM) general ConFiguration Register
+ *              	(read/write).
+ *    PPCR      	Power Manager (PM) Phase-Locked Loop (PLL)
+ *              	Configuration Register (read/write).
+ *    PGSR      	Power Manager (PM) General-Purpose Input/Output (GPIO)
+ *              	Sleep state Register (read/write, see GPIO pins).
+ *    POSR      	Power Manager (PM) Oscillator Status Register (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define PMCR		__REG(0x90020000)  /* PM Control Reg. */
+#define PSSR		__REG(0x90020004)  /* PM Sleep Status Reg. */
+#define PSPR		__REG(0x90020008)  /* PM Scratch-Pad Reg. */
+#define PWER		__REG(0x9002000C)  /* PM Wake-up Enable Reg. */
+#define PCFR		__REG(0x90020010)  /* PM general ConFiguration Reg. */
+#define PPCR		__REG(0x90020014)  /* PM PLL Configuration Reg. */
+#define PGSR		__REG(0x90020018)  /* PM GPIO Sleep state Reg. */
+#define POSR		__REG(0x9002001C)  /* PM Oscillator Status Reg. */
+
+#define PMCR_SF 	0x00000001	/* Sleep Force (set only)          */
+
+#define PSSR_SS 	0x00000001	/* Software Sleep                  */
+#define PSSR_BFS	0x00000002	/* Battery Fault Status            */
+                	        	/* (BATT_FAULT)                    */
+#define PSSR_VFS	0x00000004	/* Vdd Fault Status (VDD_FAULT)    */
+#define PSSR_DH 	0x00000008	/* DRAM control Hold               */
+#define PSSR_PH 	0x00000010	/* Peripheral control Hold         */
+
+#define PWER_GPIO(Nb)	GPIO_GPIO (Nb)	/* GPIO [0..27] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_GPIO16	PWER_GPIO (16)	/* GPIO [16] wake-up enable        */
+#define PWER_GPIO17	PWER_GPIO (17)	/* GPIO [17] wake-up enable        */
+#define PWER_GPIO18	PWER_GPIO (18)	/* GPIO [18] wake-up enable        */
+#define PWER_GPIO19	PWER_GPIO (19)	/* GPIO [19] wake-up enable        */
+#define PWER_GPIO20	PWER_GPIO (20)	/* GPIO [20] wake-up enable        */
+#define PWER_GPIO21	PWER_GPIO (21)	/* GPIO [21] wake-up enable        */
+#define PWER_GPIO22	PWER_GPIO (22)	/* GPIO [22] wake-up enable        */
+#define PWER_GPIO23	PWER_GPIO (23)	/* GPIO [23] wake-up enable        */
+#define PWER_GPIO24	PWER_GPIO (24)	/* GPIO [24] wake-up enable        */
+#define PWER_GPIO25	PWER_GPIO (25)	/* GPIO [25] wake-up enable        */
+#define PWER_GPIO26	PWER_GPIO (26)	/* GPIO [26] wake-up enable        */
+#define PWER_GPIO27	PWER_GPIO (27)	/* GPIO [27] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+#define PCFR_OPDE	0x00000001	/* Oscillator Power-Down Enable    */
+#define PCFR_ClkRun	(PCFR_OPDE*0)	/*  Clock Running in sleep mode    */
+#define PCFR_ClkStp	(PCFR_OPDE*1)	/*  Clock Stopped in sleep mode    */
+#define PCFR_FP 	0x00000002	/* Float PCMCIA pins               */
+#define PCFR_PCMCIANeg	(PCFR_FP*0)	/*  PCMCIA pins Negated (1)        */
+#define PCFR_PCMCIAFlt	(PCFR_FP*1)	/*  PCMCIA pins Floating           */
+#define PCFR_FS 	0x00000004	/* Float Static memory pins        */
+#define PCFR_StMemNeg	(PCFR_FS*0)	/*  Static Memory pins Negated (1) */
+#define PCFR_StMemFlt	(PCFR_FS*1)	/*  Static Memory pins Floating    */
+#define PCFR_FO 	0x00000008	/* Force RTC oscillator            */
+                	        	/* (32.768 kHz) enable On          */
+
+#define PPCR_CCF	Fld (5, 0)	/* CPU core Clock (CCLK) Freq.     */
+#define PPCR_Fx16	        	/*  Freq. x 16 (fcpu = 16*fxtl)    */ \
+                	(0x00 << FShft (PPCR_CCF))
+#define PPCR_Fx20	        	/*  Freq. x 20 (fcpu = 20*fxtl)    */ \
+                	(0x01 << FShft (PPCR_CCF))
+#define PPCR_Fx24	        	/*  Freq. x 24 (fcpu = 24*fxtl)    */ \
+                	(0x02 << FShft (PPCR_CCF))
+#define PPCR_Fx28	        	/*  Freq. x 28 (fcpu = 28*fxtl)    */ \
+                	(0x03 << FShft (PPCR_CCF))
+#define PPCR_Fx32	        	/*  Freq. x 32 (fcpu = 32*fxtl)    */ \
+                	(0x04 << FShft (PPCR_CCF))
+#define PPCR_Fx36	        	/*  Freq. x 36 (fcpu = 36*fxtl)    */ \
+                	(0x05 << FShft (PPCR_CCF))
+#define PPCR_Fx40	        	/*  Freq. x 40 (fcpu = 40*fxtl)    */ \
+                	(0x06 << FShft (PPCR_CCF))
+#define PPCR_Fx44	        	/*  Freq. x 44 (fcpu = 44*fxtl)    */ \
+                	(0x07 << FShft (PPCR_CCF))
+#define PPCR_Fx48	        	/*  Freq. x 48 (fcpu = 48*fxtl)    */ \
+                	(0x08 << FShft (PPCR_CCF))
+#define PPCR_Fx52	        	/*  Freq. x 52 (fcpu = 52*fxtl)    */ \
+                	(0x09 << FShft (PPCR_CCF))
+#define PPCR_Fx56	        	/*  Freq. x 56 (fcpu = 56*fxtl)    */ \
+                	(0x0A << FShft (PPCR_CCF))
+#define PPCR_Fx60	        	/*  Freq. x 60 (fcpu = 60*fxtl)    */ \
+                	(0x0B << FShft (PPCR_CCF))
+#define PPCR_Fx64	        	/*  Freq. x 64 (fcpu = 64*fxtl)    */ \
+                	(0x0C << FShft (PPCR_CCF))
+#define PPCR_Fx68	        	/*  Freq. x 68 (fcpu = 68*fxtl)    */ \
+                	(0x0D << FShft (PPCR_CCF))
+#define PPCR_Fx72	        	/*  Freq. x 72 (fcpu = 72*fxtl)    */ \
+                	(0x0E << FShft (PPCR_CCF))
+#define PPCR_Fx76	        	/*  Freq. x 76 (fcpu = 76*fxtl)    */ \
+                	(0x0F << FShft (PPCR_CCF))
+                	        	/*  3.6864 MHz crystal (fxtl):     */
+#define PPCR_F59_0MHz	PPCR_Fx16	/*   Freq. (fcpu) =  59.0 MHz      */
+#define PPCR_F73_7MHz	PPCR_Fx20	/*   Freq. (fcpu) =  73.7 MHz      */
+#define PPCR_F88_5MHz	PPCR_Fx24	/*   Freq. (fcpu) =  88.5 MHz      */
+#define PPCR_F103_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 103.2 MHz      */
+#define PPCR_F118_0MHz	PPCR_Fx32	/*   Freq. (fcpu) = 118.0 MHz      */
+#define PPCR_F132_7MHz	PPCR_Fx36	/*   Freq. (fcpu) = 132.7 MHz      */
+#define PPCR_F147_5MHz	PPCR_Fx40	/*   Freq. (fcpu) = 147.5 MHz      */
+#define PPCR_F162_2MHz	PPCR_Fx44	/*   Freq. (fcpu) = 162.2 MHz      */
+#define PPCR_F176_9MHz	PPCR_Fx48	/*   Freq. (fcpu) = 176.9 MHz      */
+#define PPCR_F191_7MHz	PPCR_Fx52	/*   Freq. (fcpu) = 191.7 MHz      */
+#define PPCR_F206_4MHz	PPCR_Fx56	/*   Freq. (fcpu) = 206.4 MHz      */
+#define PPCR_F221_2MHz	PPCR_Fx60	/*   Freq. (fcpu) = 221.2 MHz      */
+#define PPCR_F239_6MHz	PPCR_Fx64	/*   Freq. (fcpu) = 239.6 MHz      */
+#define PPCR_F250_7MHz	PPCR_Fx68	/*   Freq. (fcpu) = 250.7 MHz      */
+#define PPCR_F265_4MHz	PPCR_Fx72	/*   Freq. (fcpu) = 265.4 MHz      */
+#define PPCR_F280_2MHz	PPCR_Fx76	/*   Freq. (fcpu) = 280.2 MHz      */
+                	        	/*  3.5795 MHz crystal (fxtl):     */
+#define PPCR_F57_3MHz	PPCR_Fx16	/*   Freq. (fcpu) =  57.3 MHz      */
+#define PPCR_F71_6MHz	PPCR_Fx20	/*   Freq. (fcpu) =  71.6 MHz      */
+#define PPCR_F85_9MHz	PPCR_Fx24	/*   Freq. (fcpu) =  85.9 MHz      */
+#define PPCR_F100_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 100.2 MHz      */
+#define PPCR_F114_5MHz	PPCR_Fx32	/*   Freq. (fcpu) = 114.5 MHz      */
+#define PPCR_F128_9MHz	PPCR_Fx36	/*   Freq. (fcpu) = 128.9 MHz      */
+#define PPCR_F143_2MHz	PPCR_Fx40	/*   Freq. (fcpu) = 143.2 MHz      */
+#define PPCR_F157_5MHz	PPCR_Fx44	/*   Freq. (fcpu) = 157.5 MHz      */
+#define PPCR_F171_8MHz	PPCR_Fx48	/*   Freq. (fcpu) = 171.8 MHz      */
+#define PPCR_F186_1MHz	PPCR_Fx52	/*   Freq. (fcpu) = 186.1 MHz      */
+#define PPCR_F200_5MHz	PPCR_Fx56	/*   Freq. (fcpu) = 200.5 MHz      */
+#define PPCR_F214_8MHz	PPCR_Fx60	/*   Freq. (fcpu) = 214.8 MHz      */
+#define PPCR_F229_1MHz	PPCR_Fx64	/*   Freq. (fcpu) = 229.1 MHz      */
+#define PPCR_F243_4MHz	PPCR_Fx68	/*   Freq. (fcpu) = 243.4 MHz      */
+#define PPCR_F257_7MHz	PPCR_Fx72	/*   Freq. (fcpu) = 257.7 MHz      */
+#define PPCR_F272_0MHz	PPCR_Fx76	/*   Freq. (fcpu) = 272.0 MHz      */
+
+#define POSR_OOK	0x00000001	/* RTC Oscillator (32.768 kHz) OK  */
+
+
+/*
+ * Reset Controller (RC) control registers
+ *
+ * Registers
+ *    RSRR      	Reset Controller (RC) Software Reset Register
+ *              	(read/write).
+ *    RCSR      	Reset Controller (RC) Status Register (read/write).
+ */
+
+#define RSRR		__REG(0x90030000)  /* RC Software Reset Reg. */
+#define RCSR		__REG(0x90030004)  /* RC Status Reg. */
+
+#define RSRR_SWR	0x00000001	/* SoftWare Reset (set only)       */
+
+#define RCSR_HWR	0x00000001	/* HardWare Reset                  */
+#define RCSR_SWR	0x00000002	/* SoftWare Reset                  */
+#define RCSR_WDR	0x00000004	/* Watch-Dog Reset                 */
+#define RCSR_SMR	0x00000008	/* Sleep-Mode Reset                */
+
+
+/*
+ * Test unit control registers
+ *
+ * Registers
+ *    TUCR      	Test Unit Control Register (read/write).
+ */
+
+#define TUCR		__REG(0x90030008)  /* Test Unit Control Reg. */
+
+#define TUCR_TIC	0x00000040	/* TIC mode                        */
+#define TUCR_TTST	0x00000080	/* Trim TeST mode                  */
+#define TUCR_RCRC	0x00000100	/* Richard's Cyclic Redundancy     */
+                	        	/* Check                           */
+#define TUCR_PMD	0x00000200	/* Power Management Disable        */
+#define TUCR_MR 	0x00000400	/* Memory Request mode             */
+#define TUCR_NoMB	(TUCR_MR*0)	/*  No Memory Bus request & grant  */
+#define TUCR_MBGPIO	(TUCR_MR*1)	/*  Memory Bus request (MBREQ) &   */
+                	        	/*  grant (MBGNT) on GPIO [22:21]  */
+#define TUCR_CTB	Fld (3, 20)	/* Clock Test Bits                 */
+#define TUCR_FDC	0x00800000	/* RTC Force Delete Count          */
+#define TUCR_FMC	0x01000000	/* Force Michelle's Control mode   */
+#define TUCR_TMC	0x02000000	/* RTC Trimmer Multiplexer Control */
+#define TUCR_DPS	0x04000000	/* Disallow Pad Sleep              */
+#define TUCR_TSEL	Fld (3, 29)	/* clock Test SELect on GPIO [27]  */
+#define TUCR_32_768kHz	        	/*  32.768 kHz osc. on GPIO [27]   */ \
+                	(0 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHz	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	(1 << FShft (TUCR_TSEL))
+#define TUCR_VDD	        	/*  VDD ring osc./16 on GPIO [27]  */ \
+                	(2 << FShft (TUCR_TSEL))
+#define TUCR_96MHzPLL	        	/*  96 MHz PLL/4 on GPIO [27]      */ \
+                	(3 << FShft (TUCR_TSEL))
+#define TUCR_Clock	        	/*  internal (fcpu/2) & 32.768 kHz */ \
+                	        	/*  Clocks on GPIO [26:27]         */ \
+                	(4 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHzA	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	        	/*  (Alternative)                  */ \
+                	(5 << FShft (TUCR_TSEL))
+#define TUCR_MainPLL	        	/*  Main PLL/16 on GPIO [27]       */ \
+                	(6 << FShft (TUCR_TSEL))
+#define TUCR_VDDL	        	/*  VDDL ring osc./4 on GPIO [27]  */ \
+                	(7 << FShft (TUCR_TSEL))
+
+
+/*
+ * General-Purpose Input/Output (GPIO) control registers
+ *
+ * Registers
+ *    GPLR      	General-Purpose Input/Output (GPIO) Pin Level
+ *              	Register (read).
+ *    GPDR      	General-Purpose Input/Output (GPIO) Pin Direction
+ *              	Register (read/write).
+ *    GPSR      	General-Purpose Input/Output (GPIO) Pin output Set
+ *              	Register (write).
+ *    GPCR      	General-Purpose Input/Output (GPIO) Pin output Clear
+ *              	Register (write).
+ *    GRER      	General-Purpose Input/Output (GPIO) Rising-Edge
+ *              	detect Register (read/write).
+ *    GFER      	General-Purpose Input/Output (GPIO) Falling-Edge
+ *              	detect Register (read/write).
+ *    GEDR      	General-Purpose Input/Output (GPIO) Edge Detect
+ *              	status Register (read/write).
+ *    GAFR      	General-Purpose Input/Output (GPIO) Alternate
+ *              	Function Register (read/write).
+ *
+ * Clock
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define GPLR		__REG(0x90040000)  /* GPIO Pin Level Reg.             */
+#define GPDR		__REG(0x90040004)  /* GPIO Pin Direction Reg.         */
+#define GPSR		__REG(0x90040008)  /* GPIO Pin output Set Reg.        */
+#define GPCR		__REG(0x9004000C)  /* GPIO Pin output Clear Reg.      */
+#define GRER		__REG(0x90040010)  /* GPIO Rising-Edge detect Reg.    */
+#define GFER		__REG(0x90040014)  /* GPIO Falling-Edge detect Reg.   */
+#define GEDR		__REG(0x90040018)  /* GPIO Edge Detect status Reg.    */
+#define GAFR		__REG(0x9004001C)  /* GPIO Alternate Function Reg.    */
+
+#define GPIO_MIN	(0)
+#define GPIO_MAX	(27)
+
+#define GPIO_GPIO(Nb)	        	/* GPIO [0..27]                    */ \
+                	(0x00000001 << (Nb))
+#define GPIO_GPIO0	GPIO_GPIO (0)	/* GPIO  [0]                       */
+#define GPIO_GPIO1	GPIO_GPIO (1)	/* GPIO  [1]                       */
+#define GPIO_GPIO2	GPIO_GPIO (2)	/* GPIO  [2]                       */
+#define GPIO_GPIO3	GPIO_GPIO (3)	/* GPIO  [3]                       */
+#define GPIO_GPIO4	GPIO_GPIO (4)	/* GPIO  [4]                       */
+#define GPIO_GPIO5	GPIO_GPIO (5)	/* GPIO  [5]                       */
+#define GPIO_GPIO6	GPIO_GPIO (6)	/* GPIO  [6]                       */
+#define GPIO_GPIO7	GPIO_GPIO (7)	/* GPIO  [7]                       */
+#define GPIO_GPIO8	GPIO_GPIO (8)	/* GPIO  [8]                       */
+#define GPIO_GPIO9	GPIO_GPIO (9)	/* GPIO  [9]                       */
+#define GPIO_GPIO10	GPIO_GPIO (10)	/* GPIO [10]                       */
+#define GPIO_GPIO11	GPIO_GPIO (11)	/* GPIO [11]                       */
+#define GPIO_GPIO12	GPIO_GPIO (12)	/* GPIO [12]                       */
+#define GPIO_GPIO13	GPIO_GPIO (13)	/* GPIO [13]                       */
+#define GPIO_GPIO14	GPIO_GPIO (14)	/* GPIO [14]                       */
+#define GPIO_GPIO15	GPIO_GPIO (15)	/* GPIO [15]                       */
+#define GPIO_GPIO16	GPIO_GPIO (16)	/* GPIO [16]                       */
+#define GPIO_GPIO17	GPIO_GPIO (17)	/* GPIO [17]                       */
+#define GPIO_GPIO18	GPIO_GPIO (18)	/* GPIO [18]                       */
+#define GPIO_GPIO19	GPIO_GPIO (19)	/* GPIO [19]                       */
+#define GPIO_GPIO20	GPIO_GPIO (20)	/* GPIO [20]                       */
+#define GPIO_GPIO21	GPIO_GPIO (21)	/* GPIO [21]                       */
+#define GPIO_GPIO22	GPIO_GPIO (22)	/* GPIO [22]                       */
+#define GPIO_GPIO23	GPIO_GPIO (23)	/* GPIO [23]                       */
+#define GPIO_GPIO24	GPIO_GPIO (24)	/* GPIO [24]                       */
+#define GPIO_GPIO25	GPIO_GPIO (25)	/* GPIO [25]                       */
+#define GPIO_GPIO26	GPIO_GPIO (26)	/* GPIO [26]                       */
+#define GPIO_GPIO27	GPIO_GPIO (27)	/* GPIO [27]                       */
+
+#define GPIO_LDD(Nb)	        	/* LCD Data [8..15] (O)            */ \
+                	GPIO_GPIO ((Nb) - 6)
+#define GPIO_LDD8	GPIO_LDD (8)	/* LCD Data  [8] (O)               */
+#define GPIO_LDD9	GPIO_LDD (9)	/* LCD Data  [9] (O)               */
+#define GPIO_LDD10	GPIO_LDD (10)	/* LCD Data [10] (O)               */
+#define GPIO_LDD11	GPIO_LDD (11)	/* LCD Data [11] (O)               */
+#define GPIO_LDD12	GPIO_LDD (12)	/* LCD Data [12] (O)               */
+#define GPIO_LDD13	GPIO_LDD (13)	/* LCD Data [13] (O)               */
+#define GPIO_LDD14	GPIO_LDD (14)	/* LCD Data [14] (O)               */
+#define GPIO_LDD15	GPIO_LDD (15)	/* LCD Data [15] (O)               */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_TXD	GPIO_GPIO (10)	/*  SSP Transmit Data (O)          */
+#define GPIO_SSP_RXD	GPIO_GPIO (11)	/*  SSP Receive Data (I)           */
+#define GPIO_SSP_SCLK	GPIO_GPIO (12)	/*  SSP Sample CLocK (O)           */
+#define GPIO_SSP_SFRM	GPIO_GPIO (13)	/*  SSP Sample FRaMe (O)           */
+                	        	/* ser. port 1:                    */
+#define GPIO_UART_TXD	GPIO_GPIO (14)	/*  UART Transmit Data (O)         */
+#define GPIO_UART_RXD	GPIO_GPIO (15)	/*  UART Receive Data (I)          */
+#define GPIO_SDLC_SCLK	GPIO_GPIO (16)	/*  SDLC Sample CLocK (I/O)        */
+#define GPIO_SDLC_AAF	GPIO_GPIO (17)	/*  SDLC Abort After Frame (O)     */
+#define GPIO_UART_SCLK1	GPIO_GPIO (18)	/*  UART Sample CLocK 1 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_CLK	GPIO_GPIO (19)	/*  SSP external CLocK (I)         */
+                	        	/* ser. port 3:                    */
+#define GPIO_UART_SCLK3	GPIO_GPIO (20)	/*  UART Sample CLocK 3 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_MCP_CLK	GPIO_GPIO (21)	/*  MCP CLocK (I)                  */
+                	        	/* test controller:                */
+#define GPIO_TIC_ACK	GPIO_GPIO (21)	/*  TIC ACKnowledge (O)            */
+#define GPIO_MBGNT	GPIO_GPIO (21)	/*  Memory Bus GraNT (O)           */
+#define GPIO_TREQA	GPIO_GPIO (22)	/*  TIC REQuest A (I)              */
+#define GPIO_MBREQ	GPIO_GPIO (22)	/*  Memory Bus REQuest (I)         */
+#define GPIO_TREQB	GPIO_GPIO (23)	/*  TIC REQuest B (I)              */
+#define GPIO_1Hz	GPIO_GPIO (25)	/* 1 Hz clock (O)                  */
+#define GPIO_RCLK	GPIO_GPIO (26)	/* internal (R) CLocK (O, fcpu/2)  */
+#define GPIO_32_768kHz	GPIO_GPIO (27)	/* 32.768 kHz clock (O, RTC)       */
+
+#define GPDR_In 	0       	/* Input                           */
+#define GPDR_Out	1       	/* Output                          */
+
+
+/*
+ * Interrupt Controller (IC) control registers
+ *
+ * Registers
+ *    ICIP      	Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ *              	Pending register (read).
+ *    ICMR      	Interrupt Controller (IC) Mask Register (read/write).
+ *    ICLR      	Interrupt Controller (IC) Level Register (read/write).
+ *    ICCR      	Interrupt Controller (IC) Control Register
+ *              	(read/write).
+ *              	[The ICCR register is only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    ICFP      	Interrupt Controller (IC) Fast Interrupt reQuest
+ *              	(FIQ) Pending register (read).
+ *    ICPR      	Interrupt Controller (IC) Pending Register (read).
+ *              	[The ICPR register is active low (inverted) in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it is active high (non-inverted) in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ */
+
+#define ICIP		__REG(0x90050000)  /* IC IRQ Pending reg.             */
+#define ICMR		__REG(0x90050004)  /* IC Mask Reg.                    */
+#define ICLR		__REG(0x90050008)  /* IC Level Reg.                   */
+#define ICCR		__REG(0x9005000C)  /* IC Control Reg.                 */
+#define ICFP		__REG(0x90050010)  /* IC FIQ Pending reg.             */
+#define ICPR		__REG(0x90050020)  /* IC Pending Reg.                 */
+
+#define IC_GPIO(Nb)	        	/* GPIO [0..10]                    */ \
+                	(0x00000001 << (Nb))
+#define IC_GPIO0	IC_GPIO (0)	/* GPIO  [0]                       */
+#define IC_GPIO1	IC_GPIO (1)	/* GPIO  [1]                       */
+#define IC_GPIO2	IC_GPIO (2)	/* GPIO  [2]                       */
+#define IC_GPIO3	IC_GPIO (3)	/* GPIO  [3]                       */
+#define IC_GPIO4	IC_GPIO (4)	/* GPIO  [4]                       */
+#define IC_GPIO5	IC_GPIO (5)	/* GPIO  [5]                       */
+#define IC_GPIO6	IC_GPIO (6)	/* GPIO  [6]                       */
+#define IC_GPIO7	IC_GPIO (7)	/* GPIO  [7]                       */
+#define IC_GPIO8	IC_GPIO (8)	/* GPIO  [8]                       */
+#define IC_GPIO9	IC_GPIO (9)	/* GPIO  [9]                       */
+#define IC_GPIO10	IC_GPIO (10)	/* GPIO [10]                       */
+#define IC_GPIO11_27	0x00000800	/* GPIO [11:27] (ORed)             */
+#define IC_LCD  	0x00001000	/* LCD controller                  */
+#define IC_Ser0UDC	0x00002000	/* Ser. port 0 UDC                 */
+#define IC_Ser1SDLC	0x00004000	/* Ser. port 1 SDLC                */
+#define IC_Ser1UART	0x00008000	/* Ser. port 1 UART                */
+#define IC_Ser2ICP	0x00010000	/* Ser. port 2 ICP                 */
+#define IC_Ser3UART	0x00020000	/* Ser. port 3 UART                */
+#define IC_Ser4MCP	0x00040000	/* Ser. port 4 MCP                 */
+#define IC_Ser4SSP	0x00080000	/* Ser. port 4 SSP                 */
+#define IC_DMA(Nb)	        	/* DMA controller channel [0..5]   */ \
+                	(0x00100000 << (Nb))
+#define IC_DMA0 	IC_DMA (0)	/* DMA controller channel 0        */
+#define IC_DMA1 	IC_DMA (1)	/* DMA controller channel 1        */
+#define IC_DMA2 	IC_DMA (2)	/* DMA controller channel 2        */
+#define IC_DMA3 	IC_DMA (3)	/* DMA controller channel 3        */
+#define IC_DMA4 	IC_DMA (4)	/* DMA controller channel 4        */
+#define IC_DMA5 	IC_DMA (5)	/* DMA controller channel 5        */
+#define IC_OST(Nb)	        	/* OS Timer match [0..3]           */ \
+                	(0x04000000 << (Nb))
+#define IC_OST0 	IC_OST (0)	/* OS Timer match 0                */
+#define IC_OST1 	IC_OST (1)	/* OS Timer match 1                */
+#define IC_OST2 	IC_OST (2)	/* OS Timer match 2                */
+#define IC_OST3 	IC_OST (3)	/* OS Timer match 3                */
+#define IC_RTC1Hz	0x40000000	/* RTC 1 Hz clock                  */
+#define IC_RTCAlrm	0x80000000	/* RTC Alarm                       */
+
+#define ICLR_IRQ	0       	/* Interrupt ReQuest               */
+#define ICLR_FIQ	1       	/* Fast Interrupt reQuest          */
+
+#define ICCR_DIM	0x00000001	/* Disable Idle-mode interrupt     */
+                	        	/* Mask                            */
+#define ICCR_IdleAllInt	(ICCR_DIM*0)	/*  Idle-mode All Interrupt enable */
+                	        	/*  (ICMR ignored)                 */
+#define ICCR_IdleMskInt	(ICCR_DIM*1)	/*  Idle-mode non-Masked Interrupt */
+                	        	/*  enable (ICMR used)             */
+
+
+/*
+ * Peripheral Pin Controller (PPC) control registers
+ *
+ * Registers
+ *    PPDR      	Peripheral Pin Controller (PPC) Pin Direction
+ *              	Register (read/write).
+ *    PPSR      	Peripheral Pin Controller (PPC) Pin State Register
+ *              	(read/write).
+ *    PPAR      	Peripheral Pin Controller (PPC) Pin Assignment
+ *              	Register (read/write).
+ *    PSDR      	Peripheral Pin Controller (PPC) Sleep-mode pin
+ *              	Direction Register (read/write).
+ *    PPFR      	Peripheral Pin Controller (PPC) Pin Flag Register
+ *              	(read).
+ */
+
+#define PPDR		__REG(0x90060000)  /* PPC Pin Direction Reg.          */
+#define PPSR		__REG(0x90060004)  /* PPC Pin State Reg.              */
+#define PPAR		__REG(0x90060008)  /* PPC Pin Assignment Reg.         */
+#define PSDR		__REG(0x9006000C)  /* PPC Sleep-mode pin Direction Reg. */
+#define PPFR		__REG(0x90060010)  /* PPC Pin Flag Reg.               */
+
+#define PPC_LDD(Nb)	        	/* LCD Data [0..7]                 */ \
+                	(0x00000001 << (Nb))
+#define PPC_LDD0	PPC_LDD (0)	/* LCD Data [0]                    */
+#define PPC_LDD1	PPC_LDD (1)	/* LCD Data [1]                    */
+#define PPC_LDD2	PPC_LDD (2)	/* LCD Data [2]                    */
+#define PPC_LDD3	PPC_LDD (3)	/* LCD Data [3]                    */
+#define PPC_LDD4	PPC_LDD (4)	/* LCD Data [4]                    */
+#define PPC_LDD5	PPC_LDD (5)	/* LCD Data [5]                    */
+#define PPC_LDD6	PPC_LDD (6)	/* LCD Data [6]                    */
+#define PPC_LDD7	PPC_LDD (7)	/* LCD Data [7]                    */
+#define PPC_L_PCLK	0x00000100	/* LCD Pixel CLocK                 */
+#define PPC_L_LCLK	0x00000200	/* LCD Line CLocK                  */
+#define PPC_L_FCLK	0x00000400	/* LCD Frame CLocK                 */
+#define PPC_L_BIAS	0x00000800	/* LCD AC BIAS                     */
+                	        	/* ser. port 1:                    */
+#define PPC_TXD1	0x00001000	/*  SDLC/UART Transmit Data 1      */
+#define PPC_RXD1	0x00002000	/*  SDLC/UART Receive Data 1       */
+                	        	/* ser. port 2:                    */
+#define PPC_TXD2	0x00004000	/*  IPC Transmit Data 2            */
+#define PPC_RXD2	0x00008000	/*  IPC Receive Data 2             */
+                	        	/* ser. port 3:                    */
+#define PPC_TXD3	0x00010000	/*  UART Transmit Data 3           */
+#define PPC_RXD3	0x00020000	/*  UART Receive Data 3            */
+                	        	/* ser. port 4:                    */
+#define PPC_TXD4	0x00040000	/*  MCP/SSP Transmit Data 4        */
+#define PPC_RXD4	0x00080000	/*  MCP/SSP Receive Data 4         */
+#define PPC_SCLK	0x00100000	/*  MCP/SSP Sample CLocK           */
+#define PPC_SFRM	0x00200000	/*  MCP/SSP Sample FRaMe           */
+
+#define PPDR_In 	0       	/* Input                           */
+#define PPDR_Out	1       	/* Output                          */
+
+                	        	/* ser. port 1:                    */
+#define PPAR_UPR	0x00001000	/*  UART Pin Reassignment          */
+#define PPAR_UARTTR	(PPAR_UPR*0)	/*   UART on TXD_1 & RXD_1         */
+#define PPAR_UARTGPIO	(PPAR_UPR*1)	/*   UART on GPIO [14:15]          */
+                	        	/* ser. port 4:                    */
+#define PPAR_SPR	0x00040000	/*  SSP Pin Reassignment           */
+#define PPAR_SSPTRSS	(PPAR_SPR*0)	/*   SSP on TXD_C, RXD_C, SCLK_C,  */
+                	        	/*   & SFRM_C                      */
+#define PPAR_SSPGPIO	(PPAR_SPR*1)	/*   SSP on GPIO [10:13]           */
+
+#define PSDR_OutL	0       	/* Output Low in sleep mode        */
+#define PSDR_Flt	1       	/* Floating (input) in sleep mode  */
+
+#define PPFR_LCD	0x00000001	/* LCD controller                  */
+#define PPFR_SP1TX	0x00001000	/* Ser. Port 1 SDLC/UART Transmit  */
+#define PPFR_SP1RX	0x00002000	/* Ser. Port 1 SDLC/UART Receive   */
+#define PPFR_SP2TX	0x00004000	/* Ser. Port 2 ICP Transmit        */
+#define PPFR_SP2RX	0x00008000	/* Ser. Port 2 ICP Receive         */
+#define PPFR_SP3TX	0x00010000	/* Ser. Port 3 UART Transmit       */
+#define PPFR_SP3RX	0x00020000	/* Ser. Port 3 UART Receive        */
+#define PPFR_SP4	0x00040000	/* Ser. Port 4 MCP/SSP             */
+#define PPFR_PerEn	0       	/* Peripheral Enabled              */
+#define PPFR_PPCEn	1       	/* PPC Enabled                     */
+
+
+/*
+ * Dynamic Random-Access Memory (DRAM) control registers
+ *
+ * Registers
+ *    MDCNFG    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	CoNFiGuration register (read/write).
+ *    MDCAS0    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 0
+ *              	(read/write).
+ *    MDCAS1    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 1
+ *              	(read/write).
+ *    MDCAS2    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 2
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fcas, Tcas	Frequency, period of the DRAM CAS shift registers.
+ */
+
+#define MDCNFG		__REG(0xA0000000)  /*  DRAM CoNFiGuration reg. */
+#define MDCAS0		__REG(0xA0000004)  /* DRAM CAS shift reg. 0 */
+#define MDCAS1		__REG(0xA0000008)  /* DRAM CAS shift reg. 1 */
+#define MDCAS2		__REG(0xA000000c)  /* DRAM CAS shift reg. 2 */
+
+/* SA1100 MDCNFG values */
+#define MDCNFG_DE(Nb)	        	/* DRAM Enable bank [0..3]         */ \
+                	(0x00000001 << (Nb))
+#define MDCNFG_DE0	MDCNFG_DE (0)	/* DRAM Enable bank 0              */
+#define MDCNFG_DE1	MDCNFG_DE (1)	/* DRAM Enable bank 1              */
+#define MDCNFG_DE2	MDCNFG_DE (2)	/* DRAM Enable bank 2              */
+#define MDCNFG_DE3	MDCNFG_DE (3)	/* DRAM Enable bank 3              */
+#define MDCNFG_DRAC	Fld (2, 4)	/* DRAM Row Address Count - 9      */
+#define MDCNFG_RowAdd(Add)      	/*  Row Address count [9..12]      */ \
+                	(((Add) - 9) << FShft (MDCNFG_DRAC))
+#define MDCNFG_CDB2	0x00000040	/* shift reg. Clock Divide By 2    */
+                	        	/* (fcas = fcpu/2)                 */
+#define MDCNFG_TRP	Fld (4, 7)	/* Time RAS Pre-charge - 1 [Tmem]  */
+#define MDCNFG_PrChrg(Tcpu)     	/*  Pre-Charge time [2..32 Tcpu]   */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_CeilPrChrg(Tcpu) 	/*  Ceil. of PrChrg [2..32 Tcpu]   */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_TRASR	Fld (4, 11)	/* Time RAS Refresh - 1 [Tmem]     */
+#define MDCNFG_Ref(Tcpu)        	/*  Refresh time [2..32 Tcpu]      */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_CeilRef(Tcpu)    	/*  Ceil. of Ref [2..32 Tcpu]      */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_TDL	Fld (2, 15)	/* Time Data Latch [Tcpu]          */
+#define MDCNFG_DataLtch(Tcpu)   	/*  Data Latch delay [0..3 Tcpu]   */ \
+                	((Tcpu) << FShft (MDCNFG_TDL))
+#define MDCNFG_DRI	Fld (15, 17)	/* min. DRAM Refresh Interval/4    */
+                	        	/* [Tmem]                          */
+#define MDCNFG_RefInt(Tcpu)     	/*  min. Refresh Interval          */ \
+                	        	/*  [0..262136 Tcpu]               */ \
+                	((Tcpu)/8 << FShft (MDCNFG_DRI))
+
+/* SA1110 MDCNFG values */
+#define MDCNFG_SA1110_DE0	0x00000001	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE1	0x00000002 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM0	0x00000004	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID0	0x00000008	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC0	Fld(3, 4)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB20	0x00000080	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP0	Fld(3, 8)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL0	Fld(2, 12)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR0	Fld(2, 14)	/* SDRAM write recovery 0/1  */
+#define MDCNFG_SA1110_DE2	0x00010000	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE3	0x00020000 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM2	0x00040000	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID2	0x00080000	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC2	Fld(3, 20)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB22	0x00800000	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP2	Fld(3, 24)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL2	Fld(2, 28)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR2	Fld(2, 30)	/* SDRAM write recovery 0/1  */
+
+
+/*
+ * Static memory control registers
+ *
+ * Registers
+ *    MSC0      	Memory system: Static memory Control register 0
+ *              	(read/write).
+ *    MSC1      	Memory system: Static memory Control register 1
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ */
+
+#define MSC0		__REG(0xa0000010)  /* Static memory Control reg. 0 */
+#define MSC1		__REG(0xa0000014)  /* Static memory Control reg. 1 */
+#define MSC2		__REG(0xa000002c)  /* Static memory Control reg. 2, not contiguous   */
+
+#define MSC_Bnk(Nb)	        	/* static memory Bank [0..3]       */ \
+                	Fld (16, ((Nb) Modulo 2)*16)
+#define MSC0_Bnk0	MSC_Bnk (0)	/* static memory Bank 0            */
+#define MSC0_Bnk1	MSC_Bnk (1)	/* static memory Bank 1            */
+#define MSC1_Bnk2	MSC_Bnk (2)	/* static memory Bank 2            */
+#define MSC1_Bnk3	MSC_Bnk (3)	/* static memory Bank 3            */
+
+#define MSC_RT  	Fld (2, 0)	/* ROM/static memory Type          */
+#define MSC_NonBrst	        	/*  Non-Burst static memory        */ \
+                	(0 << FShft (MSC_RT))
+#define MSC_SRAM	        	/*  32-bit byte-writable SRAM      */ \
+                	(1 << FShft (MSC_RT))
+#define MSC_Brst4	        	/*  Burst-of-4 static memory       */ \
+                	(2 << FShft (MSC_RT))
+#define MSC_Brst8	        	/*  Burst-of-8 static memory       */ \
+                	(3 << FShft (MSC_RT))
+#define MSC_RBW 	0x0004  	/* ROM/static memory Bus Width     */
+#define MSC_32BitStMem	(MSC_RBW*0)	/*  32-Bit Static Memory           */
+#define MSC_16BitStMem	(MSC_RBW*1)	/*  16-Bit Static Memory           */
+#define MSC_RDF 	Fld (5, 3)	/* ROM/static memory read Delay    */
+                	        	/* First access - 1(.5) [Tmem]     */
+#define MSC_1stRdAcc(Tcpu)      	/*  1st Read Access time (burst    */ \
+                	        	/*  static memory) [3..65 Tcpu]    */ \
+                	((((Tcpu) - 3)/2) << FShft (MSC_RDF))
+#define MSC_Ceil1stRdAcc(Tcpu)  	/*  Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_RdAcc(Tcpu)	        	/*  Read Access time (non-burst    */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_CeilRdAcc(Tcpu)     	/*  Ceil. of RdAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDF))
+#define MSC_RDN 	Fld (5, 8)	/* ROM/static memory read Delay    */
+                	        	/* Next access - 1 [Tmem]          */
+#define MSC_NxtRdAcc(Tcpu)      	/*  Next Read Access time (burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilNxtRdAcc(Tcpu)  	/*  Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_WrAcc(Tcpu)	        	/*  Write Access time (non-burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilWrAcc(Tcpu)     	/*  Ceil. of WrAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_RRR 	Fld (3, 13)	/* ROM/static memory RecoveRy      */
+                	        	/* time/2 [Tmem]                   */
+#define MSC_Rec(Tcpu)	        	/*  Recovery time [0..28 Tcpu]     */ \
+                	(((Tcpu)/4) << FShft (MSC_RRR))
+#define MSC_CeilRec(Tcpu)       	/*  Ceil. of Rec [0..28 Tcpu]      */ \
+                	((((Tcpu) + 3)/4) << FShft (MSC_RRR))
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) control
+ * register
+ *
+ * Register
+ *    MECR      	Memory system: Expansion memory bus (PCMCIA)
+ *              	Configuration Register (read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fbclk, Tbclk	Frequency, period of the PCMCIA clock (BCLK).
+ */
+
+                	        	/* Memory system:                  */
+#define MECR		__REG(0xA0000018)  /*  Expansion memory bus (PCMCIA) Configuration Reg.             */
+
+#define MECR_PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	Fld (15, (Nb)*16)
+#define MECR_PCMCIA0	MECR_PCMCIA (0)	/* PCMCIA 0                        */
+#define MECR_PCMCIA1	MECR_PCMCIA (1)	/* PCMCIA 1                        */
+
+#define MECR_BSIO	Fld (5, 0)	/* BCLK Select I/O - 1 [Tmem]      */
+#define MECR_IOClk(Tcpu)        	/*  I/O Clock [2..64 Tcpu]         */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
+#define MECR_CeilIOClk(Tcpu)    	/*  Ceil. of IOClk [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
+#define MECR_BSA	Fld (5, 5)	/* BCLK Select Attribute - 1       */
+                	        	/* [Tmem]                          */
+#define MECR_AttrClk(Tcpu)      	/*  Attribute Clock [2..64 Tcpu]   */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSA))
+#define MECR_CeilAttrClk(Tcpu)  	/*  Ceil. of AttrClk [2..64 Tcpu]  */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSA))
+#define MECR_BSM	Fld (5, 10)	/* BCLK Select Memory - 1 [Tmem]   */
+#define MECR_MemClk(Tcpu)       	/*  Memory Clock [2..64 Tcpu]      */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSM))
+#define MECR_CeilMemClk(Tcpu)   	/*  Ceil. of MemClk [2..64 Tcpu]   */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSM))
+
+/*
+ * On SA1110 only
+ */
+
+#define MDREFR		__REG(0xA000001C)
+
+#define MDREFR_TRASR		Fld (4, 0)
+#define MDREFR_DRI		Fld (12, 4)
+#define MDREFR_E0PIN		(1 << 16)
+#define MDREFR_K0RUN		(1 << 17)
+#define MDREFR_K0DB2		(1 << 18)
+#define MDREFR_E1PIN		(1 << 20)
+#define MDREFR_K1RUN		(1 << 21)
+#define MDREFR_K1DB2		(1 << 22)
+#define MDREFR_K2RUN		(1 << 25)
+#define MDREFR_K2DB2		(1 << 26)
+#define MDREFR_EAPD		(1 << 28)
+#define MDREFR_KAPD		(1 << 29)
+#define MDREFR_SLFRSH		(1 << 31)
+
+
+/*
+ * Direct Memory Access (DMA) control registers
+ *
+ * Registers
+ *    DDAR0     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 0 (read/write).
+ *    DCSR0     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 0 (read/write).
+ *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 0 (read/write).
+ *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 0 (read/write).
+ *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 0 (read/write).
+ *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 0 (read/write).
+ *
+ *    DDAR1     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 1 (read/write).
+ *    DCSR1     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 1 (read/write).
+ *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 1 (read/write).
+ *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 1 (read/write).
+ *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 1 (read/write).
+ *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 1 (read/write).
+ *
+ *    DDAR2     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 2 (read/write).
+ *    DCSR2     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 2 (read/write).
+ *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 2 (read/write).
+ *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 2 (read/write).
+ *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 2 (read/write).
+ *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 2 (read/write).
+ *
+ *    DDAR3     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 3 (read/write).
+ *    DCSR3     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 3 (read/write).
+ *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 3 (read/write).
+ *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 3 (read/write).
+ *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 3 (read/write).
+ *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 3 (read/write).
+ *
+ *    DDAR4     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 4 (read/write).
+ *    DCSR4     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 4 (read/write).
+ *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 4 (read/write).
+ *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 4 (read/write).
+ *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 4 (read/write).
+ *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 4 (read/write).
+ *
+ *    DDAR5     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 5 (read/write).
+ *    DCSR5     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 5 (read/write).
+ *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 5 (read/write).
+ *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 5 (read/write).
+ *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 5 (read/write).
+ *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 5 (read/write).
+ */
+
+#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
+
+#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
+#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
+#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
+#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
+#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
+#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
+#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
+#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
+
+#define DDAR_RW 	0x00000001	/* device data Read/Write          */
+#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
+                	        	/*  (memory -> device)             */
+#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
+                	        	/*  (device -> memory)             */
+#define DDAR_E  	0x00000002	/* big/little Endian device        */
+#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
+#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
+#define DDAR_BS 	0x00000004	/* device Burst Size               */
+#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
+#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
+#define DDAR_DW 	0x00000008	/* device Data Width               */
+#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
+#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
+#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
+#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
+                	(0x0 << FShft (DDAR_DS))
+#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
+                	(0x1 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
+                	(0x2 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
+                	(0x3 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
+                	(0x4 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
+                	(0x5 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
+                	(0x6 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
+                	(0x7 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
+                	(0x8 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
+                	(0x9 << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
+                	        	/*  (audio)                        */ \
+                	(0xA << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
+                	        	/*  (audio)                        */ \
+                	(0xB << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
+                	        	/*  (telecom)                      */ \
+                	(0xC << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
+                	        	/*  (telecom)                      */ \
+                	(0xD << FShft (DDAR_DS))
+#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
+                	(0xE << FShft (DDAR_DS))
+#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
+                	(0xF << FShft (DDAR_DS))
+#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
+#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
+                	(((Add) & 0xF0000000) | \
+                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
+#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
+#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
+
+#define DCSR_RUN	0x00000001	/* DMA RUNing                      */
+#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
+#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
+#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
+#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
+#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
+#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
+#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
+#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
+#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
+
+#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
+#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
+#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
+
+
+/*
+ * Liquid Crystal Display (LCD) control registers
+ *
+ * Registers
+ *    LCCR0     	Liquid Crystal Display (LCD) Control Register 0
+ *              	(read/write).
+ *              	[Bits LDM, BAM, and ERM are only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *    LCSR      	Liquid Crystal Display (LCD) Status Register
+ *              	(read/write).
+ *              	[Bit LDD can be only read in versions 1.0 (rev. = 1)
+ *              	and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ *              	read and written (cleared) in versions 2.0 (rev. = 8)
+ *              	and higher.]
+ *    DBAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 1 (read/write).
+ *    DCAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 1 (read).
+ *    DBAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 2 (read/write).
+ *    DCAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 2 (read).
+ *    LCCR1     	Liquid Crystal Display (LCD) Control Register 1
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR2     	Liquid Crystal Display (LCD) Control Register 2
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR3     	Liquid Crystal Display (LCD) Control Register 3
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ *              	implemented in versions 2.0 (rev. = 8) and higher of
+ *              	the StrongARM SA-1100.]
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fpix, Tpix	Frequency, period of the pixel clock.
+ *    fln, Tln  	Frequency, period of the line clock.
+ *    fac, Tac  	Frequency, period of the AC bias clock.
+ */
+
+#define LCD_PEntrySp	2       	/* LCD Palette Entry Space [byte]  */
+#define LCD_4BitPSp	        	/* LCD 4-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(16*LCD_PEntrySp)
+#define LCD_8BitPSp	        	/* LCD 8-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(256*LCD_PEntrySp)
+#define LCD_12_16BitPSp	        	/* LCD 12/16-Bit pixel             */ \
+                	        	/* dummy-Palette Space [byte]      */ \
+                	(16*LCD_PEntrySp)
+
+#define LCD_PGrey	Fld (4, 0)	/* LCD Palette entry Grey value    */
+#define LCD_PBlue	Fld (4, 0)	/* LCD Palette entry Blue value    */
+#define LCD_PGreen	Fld (4, 4)	/* LCD Palette entry Green value   */
+#define LCD_PRed	Fld (4, 8)	/* LCD Palette entry Red value     */
+#define LCD_PBS 	Fld (2, 12)	/* LCD Pixel Bit Size              */
+#define LCD_4Bit	        	/*  LCD 4-Bit pixel mode           */ \
+                	(0 << FShft (LCD_PBS))
+#define LCD_8Bit	        	/*  LCD 8-Bit pixel mode           */ \
+                	(1 << FShft (LCD_PBS))
+#define LCD_12_16Bit	        	/*  LCD 12/16-Bit pixel mode       */ \
+                	(2 << FShft (LCD_PBS))
+
+#define LCD_Int0_0	0x0     	/* LCD Intensity =   0.0% =  0     */
+#define LCD_Int11_1	0x1     	/* LCD Intensity =  11.1% =  1/9   */
+#define LCD_Int20_0	0x2     	/* LCD Intensity =  20.0% =  1/5   */
+#define LCD_Int26_7	0x3     	/* LCD Intensity =  26.7% =  4/15  */
+#define LCD_Int33_3	0x4     	/* LCD Intensity =  33.3% =  3/9   */
+#define LCD_Int40_0	0x5     	/* LCD Intensity =  40.0% =  2/5   */
+#define LCD_Int44_4	0x6     	/* LCD Intensity =  44.4% =  4/9   */
+#define LCD_Int50_0	0x7     	/* LCD Intensity =  50.0% =  1/2   */
+#define LCD_Int55_6	0x8     	/* LCD Intensity =  55.6% =  5/9   */
+#define LCD_Int60_0	0x9     	/* LCD Intensity =  60.0% =  3/5   */
+#define LCD_Int66_7	0xA     	/* LCD Intensity =  66.7% =  6/9   */
+#define LCD_Int73_3	0xB     	/* LCD Intensity =  73.3% = 11/15  */
+#define LCD_Int80_0	0xC     	/* LCD Intensity =  80.0% =  4/5   */
+#define LCD_Int88_9	0xD     	/* LCD Intensity =  88.9% =  8/9   */
+#define LCD_Int100_0	0xE     	/* LCD Intensity = 100.0% =  1     */
+#define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
+                	        	/* (Alternative)                   */
+
+#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
+#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
+#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
+#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
+#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
+
+#define LCCR0_LEN	0x00000001	/* LCD ENable                      */
+#define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display             */
+#define LCCR0_SDS	0x00000004	/* Single/Dual panel display       */
+                	        	/* Select                          */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display           */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display             */
+#define LCCR0_LDM	0x00000008	/* LCD Disable done (LDD)          */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_BAM	0x00000010	/* Base Address update (BAU)       */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_ERM	0x00000020	/* LCD ERror (BER, IOL, IUL, IOU,  */
+                	        	/* IUU, OOL, OUL, OOU, and OUU)    */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_PAS	0x00000080	/* Passive/Active display Select   */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN)          */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT)           */
+#define LCCR0_BLE	0x00000100	/* Big/Little Endian select        */
+#define LCCR0_LtlEnd	(LCCR0_BLE*0)	/*  Little Endian frame buffer     */
+#define LCCR0_BigEnd	(LCCR0_BLE*1)	/*  Big Endian frame buffer        */
+#define LCCR0_DPD	0x00000200	/* Double Pixel Data (monochrome   */
+                	        	/* display mode)                   */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_PDD	Fld (8, 12)	/* Palette DMA request Delay       */
+                	        	/* [Tmem]                          */
+#define LCCR0_DMADel(Tcpu)      	/*  palette DMA request Delay      */ \
+                	        	/*  [0..510 Tcpu]                  */ \
+                	((Tcpu)/2 << FShft (LCCR0_PDD))
+
+#define LCSR_LDD	0x00000001	/* LCD Disable Done                */
+#define LCSR_BAU	0x00000002	/* Base Address Update (read)      */
+#define LCSR_BER	0x00000004	/* Bus ERror                       */
+#define LCSR_ABC	0x00000008	/* AC Bias clock Count             */
+#define LCSR_IOL	0x00000010	/* Input FIFO Over-run Lower       */
+                	        	/* panel                           */
+#define LCSR_IUL	0x00000020	/* Input FIFO Under-run Lower      */
+                	        	/* panel                           */
+#define LCSR_IOU	0x00000040	/* Input FIFO Over-run Upper       */
+                	        	/* panel                           */
+#define LCSR_IUU	0x00000080	/* Input FIFO Under-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OOL	0x00000100	/* Output FIFO Over-run Lower      */
+                	        	/* panel                           */
+#define LCSR_OUL	0x00000200	/* Output FIFO Under-run Lower     */
+                	        	/* panel                           */
+#define LCSR_OOU	0x00000400	/* Output FIFO Over-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OUU	0x00000800	/* Output FIFO Under-run Upper     */
+                	        	/* panel                           */
+
+#define LCCR1_PPL	Fld (6, 4)	/* Pixels Per Line/16 - 1          */
+#define LCCR1_DisWdth(Pixel)    	/*  Display Width [16..1024 pix.]  */ \
+                	(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization      */
+                	        	/* pulse Width - 1 [Tpix] (L_LCLK) */
+#define LCCR1_HorSnchWdth(Tpix) 	/*  Horizontal Synchronization     */ \
+                	        	/*  pulse Width [1..64 Tpix]       */ \
+                	(((Tpix) - 1) << FShft (LCCR1_HSW))
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait    */
+                	        	/* count - 1 [Tpix]                */
+#define LCCR1_EndLnDel(Tpix)    	/*  End-of-Line Delay              */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_ELW))
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
+                	        	/* Wait count - 1 [Tpix]           */
+#define LCCR1_BegLnDel(Tpix)    	/*  Beginning-of-Line Delay        */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1              */
+#define LCCR2_DisHght(Line)     	/*  Display Height [1..1024 lines] */ \
+                	(((Line) - 1) << FShft (LCCR2_LPP))
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
+                	        	/* Width - 1 [Tln] (L_FCLK)        */
+#define LCCR2_VrtSnchWdth(Tln)  	/*  Vertical Synchronization pulse */ \
+                	        	/*  Width [1..64 Tln]              */ \
+                	(((Tln) - 1) << FShft (LCCR2_VSW))
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait    */
+                	        	/* count [Tln]                     */
+#define LCCR2_EndFrmDel(Tln)    	/*  End-of-Frame Delay             */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_EFW))
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
+                	        	/* Wait count [Tln]                */
+#define LCCR2_BegFrmDel(Tln)    	/*  Beginning-of-Frame Delay       */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor/2 - 2       */
+                	        	/* [1..255] (L_PCLK)               */
+                	        	/* fpix = fcpu/(2*(PCD + 2))       */
+                	        	/* Tpix = 2*(PCD + 2)*Tcpu         */
+#define LCCR3_PixClkDiv(Div)    	/*  Pixel Clock Divisor [6..514]   */ \
+                	(((Div) - 4)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Floor (Div/2))  */
+                	        	/*  Tpix = 2*Floor (Div/2)*Tcpu    */
+#define LCCR3_CeilPixClkDiv(Div)	/*  Ceil. of PixClkDiv [6..514]    */ \
+                	(((Div) - 3)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Ceil (Div/2))   */
+                	        	/*  Tpix = 2*Ceil (Div/2)*Tcpu     */
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias clock half period - 1   */
+                	        	/* [Tln] (L_BIAS)                  */
+#define LCCR3_ACBsDiv(Div)      	/*  AC Bias clock Divisor [2..512] */ \
+                	(((Div) - 2)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Floor (Div/2))    */
+                	        	/*  Tac = 2*Floor (Div/2)*Tln      */
+#define LCCR3_CeilACBsDiv(Div)  	/*  Ceil. of ACBsDiv [2..512]      */ \
+                	(((Div) - 1)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Ceil (Div/2))     */
+                	        	/*  Tac = 2*Ceil (Div/2)*Tln       */
+#define LCCR3_API	Fld (4, 16)	/* AC bias Pin transitions per     */
+                	        	/* Interrupt                       */
+#define LCCR3_ACBsCntOff        	/*  AC Bias clock transition Count */ \
+                	        	/*  Off                            */ \
+                	(0 << FShft (LCCR3_API))
+#define LCCR3_ACBsCnt(Trans)    	/*  AC Bias clock transition Count */ \
+                	        	/*  [1..15]                        */ \
+                	((Trans) << FShft (LCCR3_API))
+#define LCCR3_VSP	0x00100000	/* Vertical Synchronization pulse  */
+                	        	/* Polarity (L_FCLK)               */
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
+                	        	/*  active High                    */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
+                	        	/*  active Low                     */
+#define LCCR3_HSP	0x00200000	/* Horizontal Synchronization      */
+                	        	/* pulse Polarity (L_LCLK)         */
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active High              */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active Low               */
+#define LCCR3_PCP	0x00400000	/* Pixel Clock Polarity (L_PCLK)   */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge        */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge       */
+#define LCCR3_OEP	0x00800000	/* Output Enable Polarity (L_BIAS, */
+                	        	/* active display mode)            */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
+
+#ifndef __ASSEMBLY__
+extern unsigned int processor_id;
+#endif
+
+#define CPU_REVISION	(processor_id & 15)
+#define CPU_SA1110_A0	(0)
+#define CPU_SA1110_B0	(4)
+#define CPU_SA1110_B1	(5)
+#define CPU_SA1110_B2	(6)
+#define CPU_SA1110_B4	(8)
+
+#define CPU_SA1100_ID	(0x4401a110)
+#define CPU_SA1100_MASK	(0xfffffff0)
+#define CPU_SA1110_ID	(0x6901b110)
+#define CPU_SA1110_MASK	(0xfffffff0)
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h
new file mode 100644
index 000000000000..527d887f1ee3
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+#  define LANGUAGE Assembly
+# else
+#  define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd)  (PhAdd)
+#endif
+
+#include <asm/arch/bitfield.h>
+
+#define C               0
+#define Assembly        1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0	0x00000000
+#define __SYSTEM_CONTROL1	0x00000400
+#define __ARBITER		0x00020000
+#define __SYSTEM_CONTROL2	0x00040000
+#define __SYSTEM_CONTROL3	0x00060000
+#define __PARALLEL_PORT		0x00080000
+#define __VIDMEM_CONTROL	0x00100000
+#define __UPDATE_FIFO		0x00120000
+#define __SHMEM_CONTROL1	0x00140000
+#define __INTERRUPT_CONTROL	0x00160000
+#define __USB_CONTROL		0x00180000
+#define __TRACK_INTERFACE	0x001a0000
+#define __MOUSE_INTERFACE	0x001b0000
+#define __KEYPAD_INTERFACE	0x001c0000
+#define __PCMCIA_INTERFACE	0x001e0000
+#define	__VGA_CONTROL		0x00200000
+#define __GPIO_INTERFACE	0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x )    ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ *	SKCR		SA-1101 control register (read/write)
+ *	SMCR		Shared Memory Controller Register
+ *	SNPR		Snoop Register
+ */
+
+#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
+#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
+#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
+#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
+#define SKCR_VCOON	  0x0010	  /* VCO bias */
+#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
+#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
+
+#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
+#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
+#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
+#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
+	(( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
+	(( (x) - 9 ) << FShft (SMCR_DRAC)
+
+#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
+#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
+#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
+#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
+#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
+	( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
+	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ *    VMCCR	Configuration register
+ *    VMCAR	VMC address register
+ *    VMCDR	VMC data register
+ *
+ */
+
+#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
+#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
+#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
+#define VMCCR_Config	    0x0001	  /* DRAM size */
+#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
+#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
+#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
+#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
+#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
+#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ *    UFCR	Update FIFO Control Register
+ *    UFSR	Update FIFO Status Register
+ *    UFLVLR	update FIFO level register
+ *    UFDR	update FIFO data register
+ */
+
+#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
+#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
+#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
+#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
+#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    DACDR1	DAC1 Data register
+ *    DACDR2	DAC2 Data register
+ */
+
+#define _SKPCR		_SA1101(0x00000400)
+#define _SKCDR		_SA1101(0x00040000)
+#define _DACDR1		_SA1101(0x00060000)
+#define _DACDR2		_SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn	     0x01    /* USB Enable */
+#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
+#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
+#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
+#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
+#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
+
+#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
+#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
+#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
+#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
+#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
+#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
+#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
+#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
+#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
+#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
+#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
+
+#define DACDR_DACCount	     Fld(8,0)	/* Count value */
+#define DACDR1_DACCount	     DACDR_DACCount
+#define DACDR2_DACCount	     DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ *    IEEE_Config	IEEE mode selection and programmable attributes
+ *    IEEE_Control	Controls the states of IEEE port control outputs
+ *    IEEE_Data		Forward transfer data register
+ *    IEEE_Addr		Forward transfer address register
+ *    IEEE_Status	Port IO signal status register
+ *    IEEE_IntStatus	Port interrupts status register
+ *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
+ *    IEEE_InitTime	Forward timeout counter initial value
+ *    IEEE_TimerStatus	Forward timeout counter current value
+ *    IEEE_FifoReset	Reset forward transfer FIFO
+ *    IEEE_ReloadValue	Counter reload value
+ *    IEEE_TestControl	Control testmode
+ *    IEEE_TestDataIn	Test data register
+ *    IEEE_TestDataInEn	Enable test data
+ *    IEEE_TestCtrlIn	Test control signals
+ *    IEEE_TestCtrlInEn	Enable test control signals
+ *    IEEE_TestDataStat	Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address 
+ */
+ 
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config	    _IEEE( 0x0000 )
+#define _IEEE_Control	    _IEEE( 0x0400 )
+#define _IEEE_Data	    _IEEE( 0x4000 )
+#define _IEEE_Addr	    _IEEE( 0x0800 )
+#define _IEEE_Status	    _IEEE( 0x0c00 )
+#define _IEEE_IntStatus	    _IEEE( 0x1000 )
+#define _IEEE_FifoLevels    _IEEE( 0x1400 )
+#define _IEEE_InitTime	    _IEEE( 0x1800 )
+#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
+#define _IEEE_FifoReset	    _IEEE( 0x2000 )
+#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
+#define _IEEE_TestControl   _IEEE( 0x2400 )
+#define _IEEE_TestDataIn    _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
+#define _IEEE_TestDataStat  _IEEE( 0x3800 )
+ 
+
+#if LANGUAGE == C
+#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
+#define IEEE_Config_D	    0x04	 /* FIFO access enable */
+#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
+#define IEEE_Config_T	    0x10	 /* Data transfer enable */
+#define IEEE_Config_A	    0x20	 /* Data transfer direction */
+#define IEEE_Config_E	    0x40	 /* Timer enable */
+#define IEEE_Control_A	    0x08	 /* AutoFd output */
+#define IEEE_Control_E	    0x04	 /* Selectin output */
+#define IEEE_Control_T	    0x02	 /* Strobe output */
+#define IEEE_Control_I	    0x01	 /* Port init output */
+#define IEEE_Data_C	    (1<<31)	 /* Byte count */
+#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
+#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
+#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
+#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
+#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
+#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
+#define IEEE_Status_I	    0x0020	 /* nInit port output status */
+#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
+#define IEEE_Status_S	    0x0008	 /* Select port input status */
+#define IEEE_Status_K	    0x0004	 /* nAck port input status */
+#define IEEE_Status_F	    0x0002	 /* nFault port input status */
+#define IEEE_Status_R	    0x0001	 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat	 0x0100
+#define IEEE_IntStatus_IntReqEmp	 0x0080
+#define IEEE_IntStatus_IntReqInt	 0x0040
+#define IEEE_IntStatus_IntReqRav	 0x0020
+#define IEEE_IntStatus_IntReqTim	 0x0010
+#define IEEE_IntStatus_RevAddrComp	 0x0008
+#define IEEE_IntStatus_RevDataComp	 0x0004
+#define IEEE_IntStatus_FwdAddrComp	 0x0002
+#define IEEE_IntStatus_FwdDataComp	 0x0001
+#define IEEE_FifoLevels_RevFifoLevel	 2
+#define IEEE_FifoLevels_FwdFifoLevel	 1
+#define IEEE_InitTime_TimValInit	 Fld(22,0)
+#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
+#define IEEE_ReloadValue_Reload		 Fld(4,0)
+
+#define IEEE_TestControl_RegClk		 0x04
+#define IEEE_TestControl_ClockSelect	 Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError		 0x10
+#define IEEE_TestCtrlIn_nFault		 0x08
+#define IEEE_TestCtrlIn_nAck		 0x04
+#define IEEE_TestCtrlIn_PSel		 0x02
+#define IEEE_TestCtrlIn_Busy		 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ *    VideoControl	Video Control Register
+ *    VgaTiming0	VGA Timing Register 0
+ *    VgaTiming1	VGA Timing Register 1
+ *    VgaTiming2	VGA Timing Register 2
+ *    VgaTiming3	VGA Timing Register 3
+ *    VgaBorder		VGA Border Color Register
+ *    VgaDBAR		VGADMA Base Address Register
+ *    VgaDCAR		VGADMA Channel Current Address Register
+ *    VgaStatus		VGA Status Register
+ *    VgaInterruptMask	VGA Interrupt Mask Register
+ *    VgaPalette	VGA Palette Registers
+ *    DacControl	DAC Control Register
+ *    VgaTest		VGA Controller Test Register
+ */
+
+#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl	    _VGA( 0x0000 )
+#define _VgaTiming0	    _VGA( 0x0400 )
+#define _VgaTiming1	    _VGA( 0x0800 )
+#define _VgaTiming2	    _VGA( 0x0c00 )
+#define _VgaTiming3	    _VGA( 0x1000 )
+#define _VgaBorder	    _VGA( 0x1400 )
+#define _VgaDBAR	    _VGA( 0x1800 )
+#define _VgaDCAR	    _VGA( 0x1c00 )
+#define _VgaStatus	    _VGA( 0x2000 )
+#define _VgaInterruptMask   _VGA( 0x2400 )
+#define _VgaPalette	    _VGA( 0x40000 )
+#define _DacControl	    _VGA( 0x3000 )
+#define _VgaTest	    _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl))
+#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn    0x00000000
+#define VideoControl_BGR      0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq   Fld(4,4)
+#define VideoControl_VBurstL  Fld(4,8)
+#define VideoControl_VMode    (1<<12)
+#define VideoControl_PalRead  (1<<13)
+
+#define VgaTiming0_PPL	      Fld(6,2)
+#define VgaTiming0_HSW	      Fld(8,8)
+#define VgaTiming0_HFP	      Fld(8,16)
+#define VgaTiming0_HBP	      Fld(8,24)
+
+#define VgaTiming1_LPS	      Fld(10,0)
+#define VgaTiming1_VSW	      Fld(6,10)
+#define VgaTiming1_VFP	      Fld(8,16)
+#define VgaTiming1_VBP	      Fld(8,24)
+
+#define VgaTiming2_IVS	      0x01
+#define VgaTiming2_IHS	      0x02
+#define VgaTiming2_CVS	      0x04
+#define VgaTiming2_CHS	      0x08
+
+#define VgaTiming3_HBS	      Fld(8,0)
+#define VgaTiming3_HBE	      Fld(8,8)
+#define VgaTiming3_VBS	      Fld(8,16)
+#define VgaTiming3_VBE	      Fld(8,24)
+
+#define VgaBorder_BCOL	      Fld(24,0)
+
+#define VgaStatus_VFUF	      0x01
+#define VgaStatus_VNext	      0x02
+#define VgaStatus_VComp	      0x04
+
+#define VgaInterruptMask_VFUFMask   0x00
+#define VgaInterruptMask_VNextMask  0x01
+#define VgaInterruptMask_VCompMask  0x02
+
+#define VgaPalette_R	      Fld(8,0)
+#define VgaPalette_G	      Fld(8,8)
+#define VgaPalette_B	      Fld(8,16)
+
+#define DacControl_DACON      0x0001
+#define DacControl_COMPON     0x0002
+#define DacControl_PEDON      0x0004
+#define DacControl_RTrim      Fld(5,4)
+#define DacControl_GTrim      Fld(5,9)
+#define DacControl_BTrim      Fld(5,14)
+
+#define VgaTest_TDAC	      0x00
+#define VgaTest_Datatest      Fld(4,1)
+#define VgaTest_DACTESTDAC    0x10
+#define VgaTest_DACTESTOUT    Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ *    Revision
+ *    Control
+ *    CommandStatus
+ *    InterruptStatus
+ *    InterruptEnable
+ *    HCCA
+ *    PeriodCurrentED
+ *    ControlHeadED
+ *    BulkHeadED
+ *    BulkCurrentED
+ *    DoneHead
+ *    FmInterval
+ *    FmRemaining
+ *    FmNumber
+ *    PeriodicStart
+ *    LSThreshold
+ *    RhDescriptorA
+ *    RhDescriptorB
+ *    RhStatus
+ *    RhPortStatus
+ *    USBStatus
+ *    USBReset
+ *    USTAR
+ *    USWER
+ *    USRFR
+ *    USNFR
+ *    USTCSR
+ *    USSR
+ *    
+ */
+
+#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision	  _USB( 0x0000 )
+#define _Control	  _USB( 0x0888 )
+#define _CommandStatus	  _USB( 0x0c00 )
+#define _InterruptStatus  _USB( 0x1000 )
+#define _InterruptEnable  _USB( 0x1400 )
+#define _HCCA		  _USB( 0x1800 )
+#define _PeriodCurrentED  _USB( 0x1c00 )
+#define _ControlHeadED	  _USB( 0x2000 )
+#define _BulkHeadED	  _USB( 0x2800 )
+#define _BulkCurrentED	  _USB( 0x2c00 )
+#define _DoneHead	  _USB( 0x3000 )
+#define _FmInterval	  _USB( 0x3400 )
+#define _FmRemaining	  _USB( 0x3800 )
+#define _FmNumber	  _USB( 0x3c00 )
+#define _PeriodicStart	  _USB( 0x4000 )
+#define _LSThreshold	  _USB( 0x4400 )
+#define _RhDescriptorA	  _USB( 0x4800 )
+#define _RhDescriptorB	  _USB( 0x4c00 )
+#define _RhStatus	  _USB( 0x5000 )
+#define _RhPortStatus	  _USB( 0x5400 )
+#define _USBStatus	  _USB( 0x11800 )
+#define _USBReset	  _USB( 0x11c00 )
+
+#define _USTAR		  _USB( 0x10400 )
+#define _USWER		  _USB( 0x10800 )
+#define _USRFR		  _USB( 0x10c00 )
+#define _USNFR		  _USB( 0x11000 )
+#define _USTCSR		  _USB( 0x11400 )
+#define _USSR		  _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp	     (1<<7)
+#define USBStatus_IrqHciBuffAcc	     (1<<8)
+#define USBStatus_nIrqHciM	     (1<<9)
+#define USBStatus_nHciMFClr	     (1<<10)
+
+#define USBReset_ForceIfReset	     0x01
+#define USBReset_ForceHcReset	     0x02
+#define USBReset_ClkGenReset	     0x04
+
+#define USTCR_RdBstCntrl	     Fld(3,0)
+#define USTCR_ByteEnable	     Fld(4,3)
+#define USTCR_WriteEn		     (1<<7)
+#define USTCR_FifoCir		     (1<<8)
+#define USTCR_TestXferSel	     (1<<9)
+#define USTCR_FifoCirAtEnd	     (1<<10)
+#define USTCR_nSimScaleDownClk	     (1<<11)
+
+#define USSR_nAppMDEmpty	     0x01
+#define USSR_nAppMDFirst	     0x02
+#define USSR_nAppMDLast		     0x04
+#define USSR_nAppMDFull		     0x08
+#define USSR_nAppMAFull		     0x10
+#define USSR_XferReq		     0x20
+#define USSR_XferEnd		     0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTENABLE0	Interrupt Enable register 0
+ *    INTENABLE1	Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status 0
+ *    INTSTATCLR1	Interrupt Status 1
+ *    INTSET0		Interrupt Set 0
+ *    INTSET1		Interrupt Set 1
+ */
+
+#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0	_INT( 0x1000 )
+#define _INTTEST1	_INT( 0x1400 )
+#define _INTENABLE0	_INT( 0x2000 )
+#define _INTENABLE1	_INT( 0x2400 )
+#define _INTPOL0	_INT( 0x3000 )
+#define _INTPOL1	_INT( 0x3400 )
+#define _INTTSTSEL     	_INT( 0x5000 )
+#define _INTSTATCLR0	_INT( 0x6000 )
+#define _INTSTATCLR1	_INT( 0x6400 )
+#define _INTSET0	_INT( 0x7000 )
+#define _INTSET1	_INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
+ *    KBDCR		Control Register
+ *    KBDSTAT		Status Register
+ *    KBDDATA		Transmit/Receive Data register
+ *    KBDCLKDIV		Clock Division Register
+ *    KBDPRECNT		Clock Precount Register
+ *    KBDTEST1		Test register 1
+ *    KBDTEST2		Test register 2
+ *    KBDTEST3		Test register 3
+ *    KBDTEST4		Test register 4
+ *    MSECR	
+ *    MSESTAT
+ *    MSEDATA
+ *    MSECLKDIV
+ *    MSEPRECNT
+ *    MSETEST1
+ *    MSETEST2
+ *    MSETEST3
+ *    MSETEST4
+ *     
+ */
+
+#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR		_KBD( 0x0000 )
+#define _KBDSTAT	_KBD( 0x0400 )
+#define _KBDDATA	_KBD( 0x0800 )
+#define _KBDCLKDIV	_KBD( 0x0c00 )
+#define _KBDPRECNT	_KBD( 0x1000 )
+#define	_KBDTEST1	_KBD( 0x2000 )
+#define _KBDTEST2	_KBD( 0x2400 )
+#define _KBDTEST3	_KBD( 0x2800 )
+#define _KBDTEST4	_KBD( 0x2c00 )
+#define _MSECR		_MSE( 0x0000 )
+#define _MSESTAT	_MSE( 0x0400 )
+#define _MSEDATA	_MSE( 0x0800 )
+#define _MSECLKDIV	_MSE( 0x0c00 )
+#define _MSEPRECNT	_MSE( 0x1000 )
+#define	_MSETEST1	_MSE( 0x2000 )
+#define _MSETEST2	_MSE( 0x2400 )
+#define _MSETEST3	_MSE( 0x2800 )
+#define _MSETEST4	_MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA		 0x08
+#define KBDCR_FKD		 0x02
+#define KBDCR_FKC		 0x01
+
+#define KBDSTAT_TXE		 0x80
+#define KBDSTAT_TXB		 0x40
+#define KBDSTAT_RXF		 0x20
+#define KBDSTAT_RXB		 0x10
+#define KBDSTAT_ENA		 0x08
+#define KBDSTAT_RXP		 0x04
+#define KBDSTAT_KBD		 0x02
+#define KBDSTAT_KBC		 0x01
+
+#define KBDCLKDIV_DivVal	 Fld(4,0)
+
+#define MSECR_ENA		 0x08
+#define MSECR_FKD		 0x02
+#define MSECR_FKC		 0x01
+
+#define MSESTAT_TXE		 0x80
+#define MSESTAT_TXB		 0x40
+#define MSESTAT_RXF		 0x20
+#define MSESTAT_RXB		 0x10
+#define MSESTAT_ENA		 0x08
+#define MSESTAT_RXP		 0x04	
+#define MSESTAT_MSD		 0x02
+#define MSESTAT_MSC		 0x01
+
+#define MSECLKDIV_DivVal	 Fld(4,0)
+
+#define KBDTEST1_CD		 0x80
+#define KBDTEST1_RC1		 0x40
+#define KBDTEST1_MC		 0x20
+#define KBDTEST1_C		 Fld(2,3)
+#define KBDTEST1_T2		 0x40
+#define KBDTEST1_T1		 0x20
+#define KBDTEST1_T0		 0x10
+#define KBDTEST2_TICBnRES	 0x08
+#define KBDTEST2_RKC		 0x04
+#define KBDTEST2_RKD		 0x02
+#define KBDTEST2_SEL		 0x01
+#define KBDTEST3_ms_16		 0x80
+#define KBDTEST3_us_64		 0x40
+#define KBDTEST3_us_16		 0x20
+#define KBDTEST3_DIV8		 0x10
+#define KBDTEST3_DIn		 0x08
+#define KBDTEST3_CIn		 0x04
+#define KBDTEST3_KD		 0x02
+#define KBDTEST3_KC		 0x01
+#define KBDTEST4_BC12		 0x80
+#define KBDTEST4_BC11		 0x40
+#define KBDTEST4_TRES		 0x20
+#define KBDTEST4_CLKOE		 0x10
+#define KBDTEST4_CRES		 0x08
+#define KBDTEST4_RXB		 0x04
+#define KBDTEST4_TXB		 0x02
+#define KBDTEST4_SRX		 0x01
+
+#define MSETEST1_CD		 0x80
+#define MSETEST1_RC1		 0x40
+#define MSETEST1_MC		 0x20
+#define MSETEST1_C		 Fld(2,3)
+#define MSETEST1_T2		 0x40
+#define MSETEST1_T1		 0x20
+#define MSETEST1_T0		 0x10
+#define MSETEST2_TICBnRES	 0x08
+#define MSETEST2_RKC		 0x04
+#define MSETEST2_RKD		 0x02
+#define MSETEST2_SEL		 0x01
+#define MSETEST3_ms_16		 0x80
+#define MSETEST3_us_64		 0x40
+#define MSETEST3_us_16		 0x20
+#define MSETEST3_DIV8		 0x10
+#define MSETEST3_DIn		 0x08
+#define MSETEST3_CIn		 0x04
+#define MSETEST3_KD		 0x02
+#define MSETEST3_KC		 0x01
+#define MSETEST4_BC12		 0x80
+#define MSETEST4_BC11		 0x40
+#define MSETEST4_TRES		 0x20
+#define MSETEST4_CLKOE		 0x10
+#define MSETEST4_CRES		 0x08
+#define MSETEST4_RXB		 0x04
+#define MSETEST4_TXB		 0x02
+#define MSETEST4_SRX		 0x01
+
+#endif  /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PADWR	Port A Data Write Register
+ *    PBDWR	Port B Data Write Register
+ *    PADRR	Port A Data Read Register
+ *    PBDRR	Port B Data Read Register
+ *    PADDR	Port A Data Direction Register
+ *    PBDDR	Port B Data Direction Register
+ *    PASSR	Port A Sleep State Register
+ *    PBSSR	Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR	       _PIO( 0x0000 )
+#define _PBDWR	       _PIO( 0x0400 )
+#define _PADRR	       _PIO( 0x0000 )
+#define _PBDRR	       _PIO( 0x0400 )
+#define _PADDR	       _PIO( 0x0800 )
+#define _PBDDR	       _PIO( 0x0c00 )
+#define _PASSR	       _PIO( 0x1000 )
+#define _PBSSR	       _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ *    PXDWR
+ *    PXDRR
+ *    PYDWR
+ *    PYDRR
+ *
+ */
+
+#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
+
+#define _PXDWR	   _KEYPAD( 0x0000 )
+#define _PXDRR	   _KEYPAD( 0x0000 )
+#define _PYDWR	   _KEYPAD( 0x0400 )
+#define _PYDRR	   _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ *
+ */
+
+#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR	   _CARD( 0x0000 )
+#define _PCCR	   _CARD( 0x0400 )
+#define _PCSSR	   _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready		0x0001
+#define PCSR_S1_ready		0x0002
+#define PCSR_S0_detected	0x0004
+#define PCSR_S1_detected	0x0008
+#define PCSR_S0_VS1		0x0010
+#define PCSR_S0_VS2		0x0020
+#define PCSR_S1_VS1		0x0040
+#define PCSR_S1_VS2		0x0080
+#define PCSR_S0_WP		0x0100
+#define PCSR_S1_WP		0x0200
+#define PCSR_S0_BVD1_nSTSCHG	0x0400
+#define PCSR_S0_BVD2_nSPKR	0x0800
+#define PCSR_S1_BVD1_nSTSCHG	0x1000
+#define PCSR_S1_BVD2_nSPKR	0x2000
+
+#define PCCR_S0_VPP0		0x0001
+#define PCCR_S0_VPP1		0x0002
+#define PCCR_S0_VCC0		0x0004
+#define PCCR_S0_VCC1		0x0008
+#define PCCR_S1_VPP0		0x0010
+#define PCCR_S1_VPP1		0x0020
+#define PCCR_S1_VCC0		0x0040
+#define PCCR_S1_VCC1		0x0080
+#define PCCR_S0_reset		0x0100
+#define PCCR_S1_reset		0x0200
+#define PCCR_S0_float		0x0400
+#define PCCR_S1_float		0x0800
+
+#define PCSSR_S0_VCC0		0x0001
+#define PCSSR_S0_VCC1		0x0002
+#define PCSSR_S0_VPP0		0x0004
+#define PCSSR_S0_VPP1		0x0008
+#define PCSSR_S0_control	0x0010
+#define PCSSR_S1_VCC0		0x0020
+#define PCSSR_S1_VCC1		0x0040
+#define PCSSR_S1_VPP0		0x0080
+#define PCSSR_S1_VPP1		0x0100
+#define PCSSR_S1_control	0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/include/asm-arm/arch-sa1100/SA-1111.h
new file mode 100644
index 000000000000..c38f60915cb6
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/SA-1111.h
@@ -0,0 +1,5 @@
+/*
+ * Moved to new location
+ */
+#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
+#include <asm/hardware/sa1111.h>
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h
new file mode 100644
index 000000000000..1f59b368c3f6
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/assabet.h
@@ -0,0 +1,106 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+#include <linux/config.h>
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
+#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT	-1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset()	(0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE  0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
+#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
+#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
+#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
+#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
+#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
+#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y)	do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE	0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID	(1 << 24)
+#define ASSABET_BSR_COM_DCD	(1 << 25)
+#define ASSABET_BSR_COM_CTS	(1 << 26)
+#define ASSABET_BSR_COM_DSR	(1 << 27)
+#define ASSABET_BSR_RAD_CTS	(1 << 28)
+#define ASSABET_BSR_RAD_DSR	(1 << 29)
+#define ASSABET_BSR_RAD_DCD	(1 << 30)
+#define ASSABET_BSR_RAD_RI	(1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
+#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
+#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
+#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
+#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
+#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
+#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
+#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h
new file mode 100644
index 000000000000..8d7a671492db
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/badge4.h
+ *
+ *   Tim Connors <connors@hpl.hp.com>
+ *   Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE		(0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
+#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
+#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
+#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
+#define BADGE4_5V_USB			(1<<2)
+#define BADGE4_5V_INITIALLY		(1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
new file mode 100644
index 000000000000..f1f0e3387d9c
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h
new file mode 100644
index 000000000000..356d5ba88991
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/cerf.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-sa1100/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+#include <linux/config.h>
+
+#define CERF_ETH_IO			0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
new file mode 100644
index 000000000000..d49e5ff63ca4
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -0,0 +1,85 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+#include <linux/config.h>
+
+#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
new file mode 100644
index 000000000000..755fa3453862
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/debug-macro.S
@@ -0,0 +1,57 @@
+/* linux/include/asm-arm/arch-sa1100/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		movne	\rx, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rx, \rx, #0x00050000
+		ldr	r1, [\rx, #UTCR3]
+		tst	r1, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if all ports are inactive, then there is nothing we can do
+		moveq	pc, lr
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
new file mode 100644
index 000000000000..3d60ed9f8c34
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/dma.h
@@ -0,0 +1,132 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/config.h>
+#include "hardware.h"
+
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ */
+#define MAX_DMA_ADDRESS		0xffffffff
+
+
+/*
+ * The regular generic DMA interface is inappropriate for the
+ * SA1100 DMA model.  None of the SA1100 specific drivers using
+ * DMA are portable anyway so it's pointless to try to twist the
+ * regular DMA API to accommodate them.
+ */
+#define MAX_DMA_CHANNELS	0
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS	6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE		0x1fff
+#define CUT_DMA_SIZE		0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
+	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
+	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
+	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
+	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
+	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
+	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
+	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
+	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
+	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
+	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
+	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
+	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
+	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
+	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
+	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
+	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
+	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+	volatile u_long DDAR;
+	volatile u_long SetDCSR;
+	volatile u_long ClrDCSR;
+	volatile u_long RdDCSR;
+	volatile dma_addr_t DBSA;
+	volatile u_long DBTA;
+	volatile dma_addr_t DBSB;
+	volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+			       dma_callback_t callback, void *data,
+			       dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * 	sa1100_stop_dma - stop DMA in progress
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This stops DMA without clearing buffer pointers. Unlike
+ * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * 	or sa1100_get_dma_pos().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_resume_dma - resume DMA on a stopped channel
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This resumes DMA on a channel previously stopped with
+ * 	sa1100_stop_dma().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_clear_dma - clear DMA pointers
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This clear any DMA state so the DMA engine is ready to restart
+ * 	with new buffers through sa1100_start_dma(). Any buffers in flight
+ * 	are discarded.
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
new file mode 100644
index 000000000000..51fb50ce1169
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * include/asm-arm/arch-sa1100/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xfa000000			@ ICIP = 0xfa050000
+		add	r4, r4, #0x00050000
+		ldr	\irqstat, [r4]			@ get irqs
+		ldr	\irqnr, [r4, #4]		@ ICMR = 0xfa050004
+		ands	\irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0
+		beq	1001f
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+		.endm
+
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h
new file mode 100644
index 000000000000..1b6355971574
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/h3600.h
@@ -0,0 +1,164 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_H_
+#define _INCLUDE_H3600_H_
+
+/* generalized support for H3xxx series Compaq Pocket PC's */
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT     0xf0000000
+#define H3600_BANK_2_VIRT    0xf1000000
+#define H3600_BANK_4_VIRT    0xf3800000
+
+/*
+   Machine-independent GPIO definitions
+   --- these are common across all current iPAQ platforms
+*/
+
+#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
+
+#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
+#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
+
+/* UDA1341 L3 Interface */
+#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
+#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
+#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
+
+#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
+#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
+#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
+
+#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
+#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
+#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
+#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
+
+#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
+#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
+#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
+#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
+#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
+#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
+#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
+#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
+
+
+#ifndef __ASSEMBLY__
+
+enum ipaq_egpio_type {
+	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
+	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
+	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
+	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
+	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
+	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
+	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
+	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
+	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
+	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
+	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
+	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
+	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
+};
+
+struct ipaq_model_ops {
+	const char     *generic_name;
+	void	      (*control)(enum ipaq_egpio_type, int);
+	unsigned long (*read)(void);
+	void	      (*blank_callback)(int blank);
+	int	      (*pm_callback)(int req);	    /* Primary model callback */
+	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
+};
+
+extern struct ipaq_model_ops ipaq_model_ops;
+
+static __inline__ const char * h3600_generic_name(void)
+{
+	return ipaq_model_ops.generic_name;
+}
+
+static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,level);
+}
+
+static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,0);
+}
+
+static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,1);
+}
+
+static __inline__ unsigned long read_h3600_egpio(void)
+{
+	if (ipaq_model_ops.read)
+		return ipaq_model_ops.read();
+	return 0;
+}
+
+static __inline__ int  h3600_register_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = NULL;
+}
+
+
+static __inline__ int  h3600_register_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = NULL;
+}
+
+static __inline__ int h3600_power_management(int req)
+{
+	if (ipaq_model_ops.pm_callback)
+		return ipaq_model_ops.pm_callback(req);
+	return 0;
+}
+
+#endif /* ASSEMBLY */
+
+#endif /* _INCLUDE_H3600_H_ */
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/include/asm-arm/arch-sa1100/h3600_gpio.h
new file mode 100644
index 000000000000..62b0b7879685
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/h3600_gpio.h
@@ -0,0 +1,540 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_GPIO_H_
+#define _INCLUDE_H3600_GPIO_H_
+
+/*
+ * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
+ * This file contains machine-specific definitions
+ */
+
+#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
+/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
+#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
+#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
+#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
+#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
+#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
+#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
+#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
+#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
+
+/* for H3600, audio sample rate clock generator */
+#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
+#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
+
+#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
+#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
+#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
+#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
+
+/* H3800 specific pins */
+#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
+#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
+#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
+#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
+#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
+#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
+
+/****************************************************/
+
+#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
+#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
+
+#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
+#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
+
+/* H3100 / 3600 EGPIO pins */
+#define EGPIO_H3600_VPP_ON		(1 << 0)
+#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
+#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
+#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
+#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
+#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
+#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
+#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
+#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
+#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
+#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
+#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
+#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
+#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
+#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
+
+/********************* H3800, ASIC #2 ********************/
+
+#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
+#define H3800_ASIC2_OFFSET(s,x,y)    \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+#define H3800_ASIC2_NOFFSET(s,x,n,y) \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+
+#define _H3800_ASIC2_GPIO_Base                 0x0000
+#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
+#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
+#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
+#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
+#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
+
+#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
+#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
+#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
+#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
+#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
+#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
+#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
+#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
+#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
+
+#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
+#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
+#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
+#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
+#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
+#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
+#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
+#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
+#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
+#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
+#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
+#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
+
+#define _H3800_ASIC2_KPIO_Base                 0x0200
+#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
+#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
+#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
+
+#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
+#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
+#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
+#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
+#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
+#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
+#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
+#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
+#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
+#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
+
+#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
+#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
+#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
+#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
+#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
+#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
+#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
+#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
+
+#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
+#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
+#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
+#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
+#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
+#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
+#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
+#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
+#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
+
+/* Alternate KPIO functions (set by default) */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
+
+#define _H3800_ASIC2_SPI_Base                  0x0400
+#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
+
+#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
+#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
+#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
+
+#define _H3800_ASIC2_PWM_0_Base                0x0600
+#define _H3800_ASIC2_PWM_1_Base                0x0700
+#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
+#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
+
+#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
+#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
+#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
+
+#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
+#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
+#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
+
+#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
+#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
+#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
+
+#define _H3800_ASIC2_LED_0_Base                0x0800
+#define _H3800_ASIC2_LED_1_Base                0x0880
+#define _H3800_ASIC2_LED_2_Base                0x0900
+#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
+#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
+
+#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
+#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
+#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
+#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
+
+#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
+#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
+#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
+#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
+
+#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
+#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
+#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
+#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
+
+#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
+#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
+#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
+#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
+
+#define _H3800_ASIC2_UART_0_Base               0x0A00
+#define _H3800_ASIC2_UART_1_Base               0x0C00
+#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
+#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
+#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
+
+#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
+#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
+#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
+#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
+#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
+#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
+#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
+#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
+#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
+#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
+#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
+
+#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
+#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
+#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
+#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
+#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
+#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
+#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
+#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
+#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
+#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
+#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
+
+#define _H3800_ASIC2_TIMER_Base                0x0E00
+#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
+
+#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
+
+#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
+#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
+#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
+#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
+#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
+#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
+#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
+#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
+
+#define _H3800_ASIC2_CLOCK_Base                0x1000
+#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
+
+#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
+
+#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
+#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
+#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
+#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
+#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
+#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
+#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
+#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
+#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
+#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
+#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
+#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
+#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
+
+#define _H3800_ASIC2_ADC_Base                  0x1200
+#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
+#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
+
+#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
+#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
+#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
+
+#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
+#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
+
+#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
+#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
+#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
+#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
+#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
+
+
+#define _H3800_ASIC2_INTR_Base                 0x1600
+#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
+#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
+#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
+
+#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
+#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
+#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
+
+#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
+#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
+#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
+#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
+#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
+
+#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
+#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
+
+
+#define _H3800_ASIC2_OWM_Base                  0x1800
+#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
+#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
+#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
+#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
+#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
+
+#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
+#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
+#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
+#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
+#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
+
+#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
+#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
+#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
+#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
+
+#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
+#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
+#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
+#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
+#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
+
+#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
+#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
+#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
+
+#define _H3800_ASIC2_FlashCtl_Base             0x1A00
+
+/****************************************************/
+/* H3800, ASIC #1
+ * This ASIC is accesed through ASIC #2, and
+ * mapped into the 1c00 - 1f00 region
+ */
+
+#define H3800_ASIC1_OFFSET(s,x,y)   \
+     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
+
+#define _H3800_ASIC1_MMC_Base             0x1c00
+
+#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
+#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
+#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
+#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
+#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
+#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
+#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
+#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
+#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
+#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
+#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
+#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
+#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
+#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
+#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
+
+#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
+#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
+#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
+#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
+#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
+#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
+#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
+#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
+#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
+#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
+#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
+#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
+#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
+#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
+#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
+
+#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
+#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
+
+#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
+#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
+#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
+#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
+#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
+#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
+#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
+#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
+#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
+#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
+#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
+#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
+
+#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
+#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
+#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
+#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
+
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
+
+#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
+#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
+#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
+#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
+
+#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
+
+/********* GPIO **********/
+
+#define _H3800_ASIC1_GPIO_Base        0x1e00
+
+#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
+#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
+#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
+#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
+#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
+#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
+#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
+#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
+#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
+#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
+#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
+#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
+#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
+#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
+
+#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
+#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
+#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
+#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
+#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
+#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
+#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
+#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
+#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
+#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
+#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
+#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
+#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
+#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
+#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
+
+#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
+#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
+#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
+#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
+#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
+#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
+
+#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
+#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
+#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
+
+/* These are all outputs */
+#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
+#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
+#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
+#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
+#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
+#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
+#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
+#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
+#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
+#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
+#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
+#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
+#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
+#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
+#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
+
+/* Write enable for the flash */
+
+#define _H3800_ASIC1_FlashWP_Base         0x1F00
+#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
+#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
+
+#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
new file mode 100644
index 000000000000..10c62db34362
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/hardware.h
@@ -0,0 +1,83 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+
+/* Flushing areas */
+#define FLUSH_BASE_PHYS		0xe0000000	/* SA1100 zero bank */
+#define FLUSH_BASE		0xf5000000
+#define FLUSH_BASE_MINICACHE	0xf5800000
+#define UNCACHEABLE_ADDR	0xfa050000
+
+
+/*
+ * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for 
+ * in*()/out*() macros to be usable for all cases.
+ */
+#define PCIO_BASE		0
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ *      phys            virt
+ *      80000000        f8000000
+ *      90000000        fa000000
+ *      a0000000        fc000000
+ *      b0000000        fe000000
+ */
+
+#define VIO_BASE        0xf8000000	/* virtual start of IO space */
+#define VIO_SHIFT       3		/* x = IO space shrink power */
+#define PIO_START       0x80000000	/* physical start of IO space */
+
+#define io_p2v( x )             \
+   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x )             \
+   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#if 0
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+#else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+#endif
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
new file mode 100644
index 000000000000..2153538069c7
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/ide.h
@@ -0,0 +1,76 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *              Get rid of the special ide_init_hwif_ports() functions
+ *              and make a generalised function that can be used by all
+ *              architectures.
+ */
+
+#include <linux/config.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+				       unsigned long ctrl_port, int *irq)
+{
+	unsigned long reg = data_port;
+	int i;
+	int regincr = 1;
+
+	/* The Empeg board has the first two address lines unused */
+	if (machine_is_empeg())
+		regincr = 1 << 2;
+
+	/* The LART doesn't use A0 for IDE */
+	if (machine_is_lart())
+		regincr = 1 << 1;
+
+	memset(hw, 0, sizeof(*hw));
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+		hw->io_ports[i] = reg;
+		reg += regincr;
+	}
+
+	hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+
+	if (irq)
+		*irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+    if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+        hw_regs_t hw;
+
+        /* Enable GPIO as interrupt line */
+        GPDR &= ~LART_GPIO_IDE;
+	set_irq_type(LART_IRQ_IDE, IRQT_RISING);
+
+        /* set PCMCIA interface timing */
+        MECR = 0x00060006;
+
+        /* init the interface */
+	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+        hw.irq = LART_IRQ_IDE;
+        ide_register_hw(&hw);
+#endif
+    }
+}
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
new file mode 100644
index 000000000000..7d969ffbd3bb
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/io.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many 
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
new file mode 100644
index 000000000000..eabd3be3d705
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -0,0 +1,198 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
+ */
+#include <linux/config.h>
+
+#define	IRQ_GPIO0		0
+#define	IRQ_GPIO1		1
+#define	IRQ_GPIO2		2
+#define	IRQ_GPIO3		3
+#define	IRQ_GPIO4		4
+#define	IRQ_GPIO5		5
+#define	IRQ_GPIO6		6
+#define	IRQ_GPIO7		7
+#define	IRQ_GPIO8		8
+#define	IRQ_GPIO9		9
+#define	IRQ_GPIO10		10
+#define	IRQ_GPIO11_27		11
+#define	IRQ_LCD  		12	/* LCD controller           */
+#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
+#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
+#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
+#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
+#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
+#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
+#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
+#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
+#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
+#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
+#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
+#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
+#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
+#define	IRQ_OST0 		26	/* OS Timer match 0         */
+#define	IRQ_OST1 		27	/* OS Timer match 1         */
+#define	IRQ_OST2 		28	/* OS Timer match 2         */
+#define	IRQ_OST3 		29	/* OS Timer match 3         */
+#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
+#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
+
+#define	IRQ_GPIO11		32
+#define	IRQ_GPIO12		33
+#define	IRQ_GPIO13		34
+#define	IRQ_GPIO14		35
+#define	IRQ_GPIO15		36
+#define	IRQ_GPIO16		37
+#define	IRQ_GPIO17		38
+#define	IRQ_GPIO18		39
+#define	IRQ_GPIO19		40
+#define	IRQ_GPIO20		41
+#define	IRQ_GPIO21		42
+#define	IRQ_GPIO22		43
+#define	IRQ_GPIO23		44
+#define	IRQ_GPIO24		45
+#define	IRQ_GPIO25		46
+#define	IRQ_GPIO26		47
+#define	IRQ_GPIO27		48
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.  IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START		49
+#define IRQ_BOARD_END		65
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
+#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT    9
+
+#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT    5
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h
new file mode 100644
index 000000000000..1b8e8a304800
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/jornada720.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/jornada720.h
+ *
+ * Created 2000/11/29 by John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This file contains the hardware specific definitions for HP Jornada 720
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define SA1111_BASE             (0x40000000)
+
+#define GPIO_JORNADA720_KEYBOARD	GPIO_GPIO(0)
+#define GPIO_JORNADA720_MOUSE		GPIO_GPIO(9)
+
+#define GPIO_JORNADA720_KEYBOARD_IRQ	IRQ_GPIO0
+#define GPIO_JORNADA720_MOUSE_IRQ		IRQ_GPIO9
+
+#ifndef __ASSEMBLY__
+
+void jornada720_mcu_init(void);
+void jornada_contrast(int arg_contrast);
+void jornada720_battery(void);
+int jornada720_getkey(unsigned char *data, int size);
+#endif
diff --git a/include/asm-arm/arch-sa1100/lart.h b/include/asm-arm/arch-sa1100/lart.h
new file mode 100644
index 000000000000..8a5482d908db
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/lart.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_LART_H
+#define _INCLUDE_LART_H
+
+#define LART_GPIO_ETH0			GPIO_GPIO0
+#define LART_IRQ_ETH0			IRQ_GPIO0
+
+#define LART_GPIO_IDE			GPIO_GPIO1
+#define LART_IRQ_IDE			IRQ_GPIO1
+
+#define LART_GPIO_UCB1200		GPIO_GPIO18
+#define LART_IRQ_UCB1200		IRQ_GPIO18
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
new file mode 100644
index 000000000000..32d3d5bde34d
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/memory.h
@@ -0,0 +1,108 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET	(0xc0000000UL)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+static inline void
+__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our 
+ * memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 27)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn)		(((pfn) - PHYS_PFN_OFFSET) >> (27 - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & 0x07ffffff) >> PAGE_SHIFT)
+
+#else
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h
new file mode 100644
index 000000000000..8051fd73a80b
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions: 
+ */
+
+#define NEPONSET_CPLD_BASE      (0x10000000)
+#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR                    0x10000024      /* Interrupt Reason Register */
+#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
+#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
+#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
+#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
+#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
+#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
+#define _SWPK                   0x10000020      /* Switch pack (RO)          */
+#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
+
+#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
+
+#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET		(1<<0)
+#define IRR_USAR		(1<<1)
+#define IRR_SA1111		(1<<2)
+
+#define AUD_SEL_1341            (1<<0)
+#define AUD_MUTE_1341           (1<<1)
+
+#define MDM_CTL0_RTS1		(1 << 0)
+#define MDM_CTL0_DTR1		(1 << 1)
+#define MDM_CTL0_RTS2		(1 << 2)
+#define MDM_CTL0_DTR2		(1 << 3)
+
+#define MDM_CTL1_CTS1		(1 << 0)
+#define MDM_CTL1_DSR1		(1 << 1)
+#define MDM_CTL1_DCD1		(1 << 2)
+#define MDM_CTL1_CTS2		(1 << 3)
+#define MDM_CTL1_DSR2		(1 << 4)
+#define MDM_CTL1_DCD2		(1 << 5)
+
+#define NCR_GP01_OFF		(1<<0)
+#define NCR_TP_PWR_EN		(1<<1)
+#define NCR_MS_PWR_EN		(1<<2)
+#define NCR_ENET_OSC_EN		(1<<3)
+#define NCR_SPI_KB_WK_UP	(1<<4)
+#define NCR_A0VPP		(1<<5)
+#define NCR_A1VPP		(1<<6)
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/param.h b/include/asm-arm/arch-sa1100/param.h
new file mode 100644
index 000000000000..867488909ecd
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/param.h
@@ -0,0 +1,3 @@
+/*
+ *  linux/include/asm-arm/arch-sa1100/param.h
+ */
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/include/asm-arm/arch-sa1100/shannon.h
new file mode 100644
index 000000000000..ec27d6e12140
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/shannon.h
@@ -0,0 +1,43 @@
+#ifndef _INCLUDE_SHANNON_H
+#define _INCLUDE_SHANNON_H
+
+/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
+ * written by <forsyth@vitanuova.com> */
+
+#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
+#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
+/* lcd lower = GPIO 2-9 */
+#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
+#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
+#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
+#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
+#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
+#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
+#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
+#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
+#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
+#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
+#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
+#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
+#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
+#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
+#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+/* XXX GPIO 23 unaccounted for */
+#define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
+#define SHANNON_GPIO_EJECT_1		GPIO_GPIO (25)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_1	IRQ_GPIO25
+#define SHANNON_GPIO_RDY_0		GPIO_GPIO (26)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_0		IRQ_GPIO26
+#define SHANNON_GPIO_RDY_1		GPIO_GPIO (27)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_1		IRQ_GPIO27
+
+/* MCP UCB codec GPIO pins... */
+
+#define SHANNON_UCB_GPIO_BACKLIGHT	9
+#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
+#define SHANNON_UCB_GPIO_BRIGHT		6
+#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
+#define SHANNON_UCB_GPIO_CONTRAST	0
+
+#endif
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h
new file mode 100644
index 000000000000..034301d23f60
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS	GPIO_GPIO14
+#define GPIO_UART1_DTR	GPIO_GPIO7
+#define GPIO_UART1_CTS	GPIO_GPIO8
+#define GPIO_UART1_DCD	GPIO_GPIO23
+#define GPIO_UART1_DSR	GPIO_GPIO6
+
+#define GPIO_UART3_RTS	GPIO_GPIO12
+#define GPIO_UART3_DTR	GPIO_GPIO16
+#define GPIO_UART3_CTS	GPIO_GPIO13
+#define GPIO_UART3_DCD	GPIO_GPIO18
+#define GPIO_UART3_DSR	GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON	GPIO_GPIO0
+#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS	IRQ_GPIO15
+#define IRQ_UART1_DCD	GPIO_GPIO23
+#define IRQ_UART1_DSR	GPIO_GPIO6
+#define IRQ_UART3_CTS	GPIO_GPIO13
+#define IRQ_UART3_DCD	GPIO_GPIO18
+#define IRQ_UART3_DSR	GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*---  PCMCIA  ---*/
+#define GPIO_CF_CD              GPIO_GPIO24
+#define GPIO_CF_IRQ             GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
+#define IRQ_GPIO_CF_CD          IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD		GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE        0xf1000000
+
+#define VCC_5V_EN       0x0001 // For 5V PCMCIA
+#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
+#define EN1             0x0004 // This is only for EPROM's
+#define EN0             0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON      0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET        0x0040
+#define PCMCIA_RESET    0x0080
+#define DECT_POWER_ON   0x0100
+#define IRDA_SD         0x0200 // Shutdown for powersave
+#define RS232_ON        0x0400
+#define SD_MEDIAQ       0x0800 // Shutdown for powersave
+#define LED2_ON         0x1000
+#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V       0x4000 // Enable 5V circuit
+#define RESET_SIMCARD   0x8000
+
+#define RS232_ENABLE    0x0440
+#define PCMCIAMASK      0x402f
+
+
+struct simpad_battery {
+	unsigned char ac_status;	/* line connected yes/no */
+	unsigned char status;		/* battery loading yes/no */
+	unsigned char percentage;	/* percentage loaded */
+	unsigned short life;		/* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH          0x01
+#define SIMPAD_BATT_STATUS_LOW           0x02
+#define SIMPAD_BATT_STATUS_CRITICAL      0x04
+#define SIMPAD_BATT_STATUS_CHARGING      0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
+#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT        0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
new file mode 100644
index 000000000000..6f52118ba1a4
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/system.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <linux/config.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h
new file mode 100644
index 000000000000..837be9b797dd
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/timex.h
@@ -0,0 +1,12 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998 
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE		3686400
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
new file mode 100644
index 000000000000..43453501ee66
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-brutus/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
+
+static void putstr( const char *s )
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = _Ser3UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser1UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser2UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		return;
+	} while (0);
+
+	for (; *s; s++) {
+		/* wait for space in the UART's transmitter */
+		while (!(UART(UTSR1) & UTSR1_TNF));
+
+		/* send the character out. */
+		UART(UTDR) = *s;
+
+		/* if a LF, also do CR... */
+		if (*s == 10) {
+			while (!(UART(UTSR1) & UTSR1_TNF));
+			UART(UTDR) = 13;
+		}
+	}
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
new file mode 100644
index 000000000000..135bc9493c06
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S
new file mode 100644
index 000000000000..7cb37f78825e
--- /dev/null
+++ b/include/asm-arm/arch-shark/debug-macro.S
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-shark/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		mov	\rd, #0
+1001:		add	\rd, \rd, #1
+		teq	\rd, #0x10000
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h
new file mode 100644
index 000000000000..fc985d5e62af
--- /dev/null
+++ b/include/asm-arm/arch-shark/dma.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-arm/arch-shark/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev /  .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS		0xC0400000
+#define MAX_DMA_CHANNELS	8
+#define DMA_ISA_CASCADE         4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S
new file mode 100644
index 000000000000..a924f27fb8d9
--- /dev/null
+++ b/include/asm-arm/arch-shark/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * include/asm-arm/arch-shark/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xe0000000
+
+		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	43f
+		and	\irqnr, \irqnr, #7
+		teq	\irqnr, #2
+		bne	44f
+43:		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	44f
+		and	\irqnr, \irqnr, #7
+		add	\irqnr, \irqnr, #8
+44:		teq	\irqstat, #0
+		.endm
+
diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h
new file mode 100644
index 000000000000..4d35f8c154c3
--- /dev/null
+++ b/include/asm-arm/arch-shark/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * linux/include/asm-arm/arch-shark/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * linux/include/asm-arm/arch-ebsa110/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE			0xe0000000
+
+/*
+ * RAM definitions
+ */
+#define FLUSH_BASE_PHYS		0x80000000
+
+#else
+
+#define IO_BASE			0
+
+#endif
+
+#define IO_SIZE			0x08000000
+#define IO_START		0x40000000
+#define ROMCARD_SIZE		0x08000000
+#define ROMCARD_START		0x10000000
+
+#define FLUSH_BASE		0xdf000000
+#define PCIO_BASE		0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#define UNCACHEABLE_ADDR        0xdf010000
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
+#define pcibios_assign_all_busses()     1
+
+#define PCIBIOS_MIN_IO          0x6000
+#define PCIBIOS_MIN_MEM         0x50000000
+#define PCIMEM_BASE		0xe8000000
+
+#endif
+
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
new file mode 100644
index 000000000000..1e7f26bc2e1d
--- /dev/null
+++ b/include/asm-arm/arch-shark/io.h
@@ -0,0 +1,199 @@
+/*
+ * linux/include/asm-arm/arch-shark/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * linux/include/asm-arm/arch-ebsa110/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+#define DECLARE_DYN_OUT(fnsuffix,instr)						\
+static inline void __out##fnsuffix (unsigned int value, unsigned int port)	\
+{										\
+	unsigned long temp;							\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"str" instr "	%1, [%0, %2]	@ out" #fnsuffix			\
+	: "=&r" (temp)								\
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)	\
+	: "cc");								\
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2]	@ in" #fnsuffix				\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_OUT(fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(long,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_OUT
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]		@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" (port));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]		@ outbc"			\
+		: : "r" (value), "r" (IO_BASE), "r" (port));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;                                                   \
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]		@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" (port));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]		@ inbc"				\
+		: "=r" (result) : "r" (IO_BASE), "r" (port));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strh	%0, [%1, %2]		@ outwc"			\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" (port));	\
+	else									\
+		__asm__ __volatile__(						\
+		"strh	%0, [%1, %2]		@ outwc"			\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" (port));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrh	%0, [%1, %2]		@ inwc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" (port));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrh	%0, [%1, %2]		@ inwc"				\
+		: "=r" (result) : "r" (IO_BASE), "r" (port));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)								\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]		@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" (port));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]		@ outlc"			\
+		: : "r" (v), "r" (IO_BASE), "r" (port));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]		@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" (port));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]		@ inlc"				\
+		: "=r" (result) : "r" (IO_BASE), "r" (port));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+({										\
+	unsigned long addr;							\
+	if (__PORT_PCIO((port)))						\
+		addr = PCIO_BASE + (port);				\
+	else									\
+		addr = IO_BASE + (port);					\
+	addr;									\
+})
+
+#define __mem_pci(addr) (addr)
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)								\
+	(*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p)								\
+	(*(volatile unsigned char *)(p))
+
+#define outl_t(v,p)								\
+	(*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p)								\
+	(*(volatile unsigned long *)(p))
+
+#endif
diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h
new file mode 100644
index 000000000000..b36cc975b290
--- /dev/null
+++ b/include/asm-arm/arch-shark/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * linux/include/asm-arm/arch-shark/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS			16
+
+#define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
+#define I8042_KBD_IRQ		 1
+#define I8042_AUX_IRQ		12
+#define IRQ_HARDDISK            14
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
new file mode 100644
index 000000000000..8ff956d25463
--- /dev/null
+++ b/include/asm-arm/arch-shark/memory.h
@@ -0,0 +1,42 @@
+/*
+ * linux/include/asm-arm/arch-shark/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * linux/include/asm-arm/arch-ebsa110/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x08000000UL)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+{
+  if (node != 0) return;
+  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  zone_size[1] = zone_size[0] - 1024;
+  zone_size[0] = 1024;
+  zhole_size[1] = zhole_size[0];
+  zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-shark/param.h b/include/asm-arm/arch-shark/param.h
new file mode 100644
index 000000000000..997eeb71de00
--- /dev/null
+++ b/include/asm-arm/arch-shark/param.h
@@ -0,0 +1,5 @@
+/*
+ *  linux/include/asm-arm/arch-shark/param.h
+ *
+ * by Alexander Schulz
+ */
diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h
new file mode 100644
index 000000000000..f12d771ab4ce
--- /dev/null
+++ b/include/asm-arm/arch-shark/system.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/arch-shark/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+	short temp;
+	local_irq_disable();
+	/* Reset the Machine via pc[3] of the sequoia chipset */
+	outw(0x09,0x24);
+	temp=inw(0x26);
+	temp = temp | (1<<3) | (1<<10);
+	outw(0x09,0x24);
+	outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h
new file mode 100644
index 000000000000..0d02d255513b
--- /dev/null
+++ b/include/asm-arm/arch-shark/timex.h
@@ -0,0 +1,7 @@
+/*
+ * linux/include/asm-arm/arch-shark/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h
new file mode 100644
index 000000000000..910a8e0a0ca5
--- /dev/null
+++ b/include/asm-arm/arch-shark/uncompress.h
@@ -0,0 +1,60 @@
+/*
+ * linux/include/asm-arm/arch-shark/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * linux/include/asm-arm/arch-ebsa285/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static __inline__ void putc(char c)
+{
+	int t;
+
+	SERIAL_BASE[0] = c;
+	t=0x10000;
+	while (t--);
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		putc(*s);
+		if (*s == '\n')
+			putc('\r');
+		s++;
+	}
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+	int i;
+	char x;
+
+	putc('0');
+	putc('x');
+	for (i=0;i<8;i++) {
+		x='0'+((z>>((7-i)*4))&0xf);
+		if (x>'9') x=x-'0'+'A'-10;
+		putc(x);
+	}
+}
+
+static void putr()
+{
+	putc('\n');
+	putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
new file mode 100644
index 000000000000..1cc20098f690
--- /dev/null
+++ b/include/asm-arm/arch-shark/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-rpc/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
new file mode 100644
index 000000000000..89e38ac1444e
--- /dev/null
+++ b/include/asm-arm/arch-versatile/debug-macro.S
@@ -0,0 +1,39 @@
+/* linux/include/asm-arm/arch-versatile/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/amba_serial.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x001F0000
+		orr	\rx, \rx, #0x00001000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
new file mode 100644
index 000000000000..dcc8ac26eac0
--- /dev/null
+++ b/include/asm-arm/arch-versatile/dma.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
new file mode 100644
index 000000000000..90e4e970d253
--- /dev/null
+++ b/include/asm-arm/arch-versatile/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * include/asm-arm/arch-versatile/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+			.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		beq	1003f
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+
+@		clz	\irqnr, \irqstat
+@1003:		/* EQ will be set if we reach MAXIRQNUM */
+		.endm
+
diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h
new file mode 100644
index 000000000000..d5fb4a251e7f
--- /dev/null
+++ b/include/asm-arm/arch-versatile/hardware.h
@@ -0,0 +1,45 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/hardware.h
+ *
+ *  This file contains the hardware definitions of the Versatile boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <asm/arch/platform.h>
+
+// FIXME = PCI settings need to be fixed!!!!!
+
+/*
+ * Similar to above, but for PCI addresses (memory, IO, Config and the
+ * V3 chip itself).  WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR       0xe8000000
+#define PCI_CONFIG_VADDR       0xec000000
+#define PCI_V3_VADDR           0xed000000
+#define PCI_IO_VADDR           0xee000000
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h
new file mode 100644
index 000000000000..dbb7158788fc
--- /dev/null
+++ b/include/asm-arm/arch-versatile/io.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
new file mode 100644
index 000000000000..745aa841b31a
--- /dev/null
+++ b/include/asm-arm/arch-versatile/irqs.h
@@ -0,0 +1,211 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/arch/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_VIC_START		0
+#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END		(IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/* 
+ *  FIQ interrupts definitions are the same the INT definitions.
+ */
+#define FIQ_WDOGINT		INT_WDOGINT
+#define FIQ_SOFTINT		INT_SOFTINT
+#define FIQ_COMMRx		INT_COMMRx
+#define FIQ_COMMTx		INT_COMMTx
+#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
+#define FIQ_GPIOINT0		INT_GPIOINT0
+#define FIQ_GPIOINT1		INT_GPIOINT1
+#define FIQ_GPIOINT2		INT_GPIOINT2
+#define FIQ_GPIOINT3		INT_GPIOINT3
+#define FIQ_RTCINT		INT_RTCINT
+#define FIQ_SSPINT		INT_SSPINT
+#define FIQ_UARTINT0		INT_UARTINT0
+#define FIQ_UARTINT1		INT_UARTINT1
+#define FIQ_UARTINT2		INT_UARTINT2
+#define FIQ_SCIINT		INT_SCIINT
+#define FIQ_CLCDINT		INT_CLCDINT
+#define FIQ_DMAINT		INT_DMAINT
+#define FIQ_PWRFAILINT 		INT_PWRFAILINT
+#define FIQ_MBXINT		INT_MBXINT
+#define FIQ_GNDINT		INT_GNDINT
+#define FIQ_VICSOURCE21		INT_VICSOURCE21
+#define FIQ_VICSOURCE22		INT_VICSOURCE22
+#define FIQ_VICSOURCE23		INT_VICSOURCE23
+#define FIQ_VICSOURCE24		INT_VICSOURCE24
+#define FIQ_VICSOURCE25		INT_VICSOURCE25
+#define FIQ_VICSOURCE26		INT_VICSOURCE26
+#define FIQ_VICSOURCE27		INT_VICSOURCE27
+#define FIQ_VICSOURCE28		INT_VICSOURCE28
+#define FIQ_VICSOURCE29		INT_VICSOURCE29
+#define FIQ_VICSOURCE30		INT_VICSOURCE30
+#define FIQ_VICSOURCE31		INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT		INTMASK_WDOGINT
+#define FIQMASK_SOFTINT		INTMASK_SOFTINT
+#define FIQMASK_COMMRx 		INTMASK_COMMRx
+#define FIQMASK_COMMTx 		INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define FIQMASK_RTCINT 		INTMASK_RTCINT
+#define FIQMASK_SSPINT 		INTMASK_SSPINT
+#define FIQMASK_UARTINT0	INTMASK_UARTINT0
+#define FIQMASK_UARTINT1	INTMASK_UARTINT1
+#define FIQMASK_UARTINT2	INTMASK_UARTINT2
+#define FIQMASK_SCIINT 		INTMASK_SCIINT
+#define FIQMASK_CLCDINT		INTMASK_CLCDINT
+#define FIQMASK_DMAINT 		INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT 		INTMASK_MBXINT
+#define FIQMASK_GNDINT 		INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START		32
+#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END		63
+
+#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB		SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
+
+#define NR_IRQS			64
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
new file mode 100644
index 000000000000..7b8b7cc422fa
--- /dev/null
+++ b/include/asm-arm/arch-versatile/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	(0x00000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-versatile/param.h b/include/asm-arm/arch-versatile/param.h
new file mode 100644
index 000000000000..34b897335f87
--- /dev/null
+++ b/include/asm-arm/arch-versatile/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/param.h
+ *
+ *  Copyright (C) 2002 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
new file mode 100644
index 000000000000..2598d1f08548
--- /dev/null
+++ b/include/asm-arm/arch-versatile/platform.h
@@ -0,0 +1,510 @@
+/*
+ * linux/include/asm-arm/arch-versatile/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI          0x30000000
+#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
+#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
+
+#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE           SZ_2M
+
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define VERSATILE_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define VERSATILE_SYS_ID_OFFSET               0x00
+#define VERSATILE_SYS_SW_OFFSET               0x04
+#define VERSATILE_SYS_LED_OFFSET              0x08
+#define VERSATILE_SYS_OSC0_OFFSET             0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x10
+#define VERSATILE_SYS_OSC2_OFFSET             0x14
+#define VERSATILE_SYS_OSC3_OFFSET             0x18
+#define VERSATILE_SYS_OSC4_OFFSET             0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x1C
+#endif
+
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_100HZ_OFFSET            0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET            0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PICCTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
+#define VERSATILE_SYS_24MHz_OFFSET            0x5C
+#define VERSATILE_SYS_MISC_OFFSET             0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
+
+#define VERSATILE_SYS_BASE                    0x10000000
+#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PICCTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PICCTL_OFFSET)
+#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
+#define VERSATILE_SYS_CTRL_RESET_POR          0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
+
+#define VERSATILE_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
+#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
+#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
+#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
+#define VERSATILE_SCI1_BASE            0x1000A000
+#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
+	/* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
+#define VERSATILE_USB_BASE             0x10020000	/* USB */
+	/* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
+#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
+#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+                                                /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
+#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
+#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
+	/* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
+#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
+#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
+#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
+#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
+#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
+#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE             0x2C000000
+#define VERSATILE_DOC_SIZE             (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE        512
+#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0             (1 << 0)
+#define VERSATILE_SYS_LED1             (1 << 1)
+#define VERSATILE_SYS_LED2             (1 << 2)
+#define VERSATILE_SYS_LED3             (1 << 3)
+#define VERSATILE_SYS_LED4             (1 << 4)
+#define VERSATILE_SYS_LED5             (1 << 5)
+#define VERSATILE_SYS_LED6             (1 << 6)
+#define VERSATILE_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  VERSATILE_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
+#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	VERSATILE_IC_BASE
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	VERSATILE_SYS_IC 
+ * 
+ */
+#define VIC_IRQ_STATUS                  0
+#define VIC_FIQ_STATUS                  0x04
+#define VIC_IRQ_RAW_STATUS              0x08
+#define VIC_INT_SELECT                  0x0C	/* 1 = FIQ, 0 = IRQ */
+#define VIC_IRQ_ENABLE                  0x10	/* 1 = enable, 0 = disable */
+#define VIC_IRQ_ENABLE_CLEAR            0x14
+#define VIC_IRQ_SOFT                    0x18
+#define VIC_IRQ_SOFT_CLEAR              0x1C
+#define VIC_PROTECT                     0x20
+#define VIC_VECT_ADDR                   0x30
+#define VIC_DEF_VECT_ADDR               0x34
+#define VIC_VECT_ADDR0                  0x100	/* 0 to 15 */
+#define VIC_VECT_CNTL0                  0x200	/* 0 to 15 */
+#define VIC_ITCR                        0x300   /* VIC test control register */
+
+#define VIC_FIQ_RAW_STATUS              0x08
+#define VIC_FIQ_ENABLE                  0x10	/* 1 = enable, 0 = disable */
+#define VIC_FIQ_ENABLE_CLEAR            0x14
+#define VIC_FIQ_SOFT                    0x18
+#define VIC_FIQ_SOFT_CLEAR              0x1C
+
+#define SIC_IRQ_STATUS                  0
+#define SIC_IRQ_RAW_STATUS              0x04
+#define SIC_IRQ_ENABLE                  0x08
+#define SIC_IRQ_ENABLE_SET              0x08
+#define SIC_IRQ_ENABLE_CLEAR            0x0C
+#define SIC_INT_SOFT_SET                0x10
+#define SIC_INT_SOFT_CLEAR              0x14
+#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
+
+#define VICVectCntl_Enable		(1 << 5)
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT                     0	/* Watchdog timer */
+#define INT_SOFTINT                     1	/* Software interrupt */
+#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
+#define INT_GPIOINT0                    6	/* GPIO 0 */
+#define INT_GPIOINT1                    7	/* GPIO 1 */
+#define INT_GPIOINT2                    8	/* GPIO 2 */
+#define INT_GPIOINT3                    9	/* GPIO 3 */
+#define INT_RTCINT                      10	/* Real Time Clock */
+#define INT_SSPINT                      11	/* Synchronous Serial Port */
+#define INT_UARTINT0                    12	/* UART 0 on development chip */
+#define INT_UARTINT1                    13	/* UART 1 on development chip */
+#define INT_UARTINT2                    14	/* UART 2 on development chip */
+#define INT_SCIINT                      15	/* Smart Card Interface */
+#define INT_CLCDINT                     16	/* CLCD controller */
+#define INT_DMAINT                      17	/* DMA controller */
+#define INT_PWRFAILINT                  18	/* Power failure */
+#define INT_MBXINT                      19	/* Graphics processor */
+#define INT_GNDINT                      20	/* Reserved */
+	/* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21                 21	/* Disk on Chip */
+#define INT_VICSOURCE22                 22	/* MCI0A */
+#define INT_VICSOURCE23                 23	/* MCI1A */
+#define INT_VICSOURCE24                 24	/* AACI */
+#define INT_VICSOURCE25                 25	/* Ethernet */
+#define INT_VICSOURCE26                 26	/* USB */
+#define INT_VICSOURCE27                 27	/* PCI 0 */
+#define INT_VICSOURCE28                 28	/* PCI 1 */
+#define INT_VICSOURCE29                 29	/* PCI 2 */
+#define INT_VICSOURCE30                 30	/* PCI 3 */
+#define INT_VICSOURCE31                 31	/* SIC source */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
+#define INTMASK_COMMRx                  (1 << INT_COMMRx)
+#define INTMASK_COMMTx                  (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT                  (1 << INT_RTCINT)
+#define INTMASK_SSPINT                  (1 << INT_SSPINT)
+#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
+#define INTMASK_SCIINT                  (1 << INT_SCIINT)
+#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
+#define INTMASK_DMAINT                  (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT                  (1 << INT_MBXINT)
+#define INTMASK_GNDINT                  (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT               0x003FFFFF
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
+#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
+#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3                    5	/* Smart Card interface */
+#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
+#define SIC_INT_CLCD                    7	/* Character LCD */
+#define SIC_INT_TOUCH                   8	/* Touchscreen */
+#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
+	/* 10:20 - reserved */
+#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A                  22	/* MMC 0A */
+#define SIC_INT_MMCI1A                  23	/* MMC 1A */
+#define SIC_INT_AACI                    24	/* Audio Codec */
+#define SIC_INT_ETH                     25	/* Ethernet controller */
+#define SIC_INT_USB                     26	/* USB controller */
+#define SIC_INT_PCI0                    27
+#define SIC_INT_PCI1                    28
+#define SIC_INT_PCI2                    29
+#define SIC_INT_PCI3                    30
+
+
+#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      VERSATILE_FLASH_BASE
+#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE             0x10000000
+#define VERSATILE_CSR_SIZE             0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK	0x24000000
+#define VERSATILE_IB2_KBD_DATAREG	0x25000000
+#define VERSATILE_IB2_IER		0x26000000	/* for VICINTSOURCE27 */
+#define VERSATILE_IB2_CTRL		0x27000000
+#define VERSATILE_IB2_STAT		0x27000004
+#endif
+
+#endif
+
+/* 	END */
diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h
new file mode 100644
index 000000000000..8889a189739f
--- /dev/null
+++ b/include/asm-arm/arch-versatile/system.h
@@ -0,0 +1,51 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	unsigned int hdr_ctrl =	(IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_RESETCTL_OFFSET);
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= VERSATILE_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h
new file mode 100644
index 000000000000..38fd04fc9141
--- /dev/null
+++ b/include/asm-arm/arch-versatile/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/timex.h
+ *
+ *  Versatile architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h
new file mode 100644
index 000000000000..2f57499c7b92
--- /dev/null
+++ b/include/asm-arm/arch-versatile/uncompress.h
@@ -0,0 +1,52 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		while (AMBA_UART_FR & (1 << 5))
+			barrier();
+
+		AMBA_UART_DR = *s;
+
+		if (*s == '\n') {
+			while (AMBA_UART_FR & (1 << 5))
+				barrier();
+
+			AMBA_UART_DR = '\r';
+		}
+		s++;
+	}
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h
new file mode 100644
index 000000000000..adfb34829bfc
--- /dev/null
+++ b/include/asm-arm/arch-versatile/vmalloc.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/arch-versatile/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET		(8*1024*1024)
+#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x)	((unsigned long)(x))
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
new file mode 100644
index 000000000000..69a28f96bee2
--- /dev/null
+++ b/include/asm-arm/assembler.h
@@ -0,0 +1,117 @@
+/*
+ *  linux/include/asm-arm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull            lsr
+#define push            lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define pull            lsl
+#define push            lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+#define MODE_USR	USR_MODE
+#define MODE_FIQ	FIQ_MODE
+#define MODE_IRQ	IRQ_MODE
+#define MODE_SVC	SVC_MODE
+
+#define DEFAULT_FIQ	MODE_FIQ
+
+/*
+ * LOADREGS - ldm with PC in register list (eg, ldmfd sp!, {pc})
+ */
+#ifdef __STDC__
+#define LOADREGS(cond, base, reglist...)\
+	ldm##cond	base,reglist
+#else
+#define LOADREGS(cond, base, reglist...)\
+	ldm/**/cond	base,reglist
+#endif
+
+/*
+ * Build a return instruction for this processor type.
+ */
+#define RETINSTR(instr, regs...)\
+	instr	regs
+
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr, temp
+	mrs	\oldcpsr, cpsr
+	mov	\temp, #PSR_I_BIT | MODE_SVC
+	msr	cpsr_c, \temp
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs, oldcpsr
+	msr	cpsr_c, \oldcpsr
+	.endm
+
+/*
+ * These two are used to save LR/restore PC over a user-based access.
+ * The old 26-bit architecture requires that we do.  On 32-bit
+ * architecture, we can safely ignore this requirement.
+ */
+	.macro	save_lr
+	.endm
+
+	.macro	restore_pc
+	mov	pc, lr
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous
diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h
new file mode 100644
index 000000000000..2885972b0855
--- /dev/null
+++ b/include/asm-arm/atomic.h
@@ -0,0 +1,165 @@
+/*
+ *  linux/include/asm-arm/atomic.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *  Copyright (C) 2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/config.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)	((v)->counter)
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/*
+ * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.  Writing to 'v->counter'
+ * without using the following operations WILL break the atomic
+ * nature of these ops.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic_set\n"
+"1:	ldrex	%0, [%1]\n"
+"	strex	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__("@ atomic_clear_mask\n"
+"1:	ldrex	%0, %2\n"
+"	bic	%0, %0, %3\n"
+"	strex	%1, %0, %2\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (addr), "Ir" (mask)
+	: "cc");
+}
+
+#else /* ARM_ARCH_6 */
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	local_irq_save(flags);
+	val = v->counter;
+	v->counter = val += i;
+	local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	local_irq_save(flags);
+	val = v->counter;
+	v->counter = val -= i;
+	local_irq_restore(flags);
+
+	return val;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*addr &= ~mask;
+	local_irq_restore(flags);
+}
+
+#endif /* __LINUX_ARM_ARCH__ */
+
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
+#define atomic_inc(v)		(void) atomic_add_return(1, v)
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
+#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif
+#endif
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
new file mode 100644
index 000000000000..4edd4dc40c5b
--- /dev/null
+++ b/include/asm-arm/bitops.h
@@ -0,0 +1,416 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ *  Linus Torvalds (test_bit).
+ * Big endian support: Copyright 2001, Nicolas Pitre
+ *  reworked by rmk.
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit()	do { } while (0)
+#define smp_mb__after_clear_bit()	do { } while (0)
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p |= mask;
+	local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p ^= mask;
+	local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res | mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res & ~mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res ^ mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+/*
+ * Now the non-atomic variants.  We let the compiler handle all
+ * optimisations for these.  These are all _native_ endian.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] |= (1UL << (nr & 31));
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] &= ~(1UL << (nr & 31));
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] ^= (1UL << (nr & 31));
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval | mask;
+	return oldval & mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval & ~mask;
+	return oldval & mask;
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval ^ mask;
+	return oldval & mask;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __test_bit(int nr, const volatile unsigned long * p)
+{
+	return (p[nr >> 5] >> (nr & 31)) & 1UL;
+}
+
+/*
+ *  A note about Endian-ness.
+ *  -------------------------
+ *
+ * When the ARM is put into big endian mode via CR15, the processor
+ * merely swaps the order of bytes within words, thus:
+ *
+ *          ------------ physical data bus bits -----------
+ *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
+ * little     byte 3       byte 2       byte 1      byte 0
+ * big        byte 0       byte 1       byte 2      byte 3
+ *
+ * This means that reading a 32-bit word at address 0 returns the same
+ * value irrespective of the endian mode bit.
+ *
+ * Peripheral devices should be connected with the data bus reversed in
+ * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
+ * available from http://www.arm.com/.
+ *
+ * The following assumes that the data bus connectivity for big endian
+ * mode has been followed.
+ *
+ * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
+ */
+
+/*
+ * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(const void * p, unsigned size);
+extern int _find_next_zero_bit_le(const void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
+ */
+extern void _set_bit_be(int nr, volatile unsigned long * p);
+extern void _clear_bit_be(int nr, volatile unsigned long * p);
+extern void _change_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_be(const void * p, unsigned size);
+extern int _find_next_zero_bit_be(const void * p, int size, int offset);
+extern int _find_first_bit_be(const unsigned long *p, unsigned size);
+extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define	ATOMIC_BITOP_LE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_le(nr,p))
+
+#define	ATOMIC_BITOP_BE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_be(nr,p))
+
+#define NONATOMIC_BITOP(name,nr,p)		\
+	(____nonatomic_##name(nr, p))
+
+#ifndef __ARMEB__
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define test_bit(nr,p)			__test_bit(nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x))
+
+#else
+
+/*
+ * These are the big endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
+#define test_bit(nr,p)			__test_bit(nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
+
+#endif
+
+#if __LINUX_ARM_ARCH__ < 5
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	int k;
+
+	word = ~word;
+	k = 31;
+	if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+	if (word & 0x00ff0000) { k -= 8;  word <<= 8;  }
+	if (word & 0x0f000000) { k -= 4;  word <<= 4;  }
+	if (word & 0x30000000) { k -= 2;  word <<= 2;  }
+	if (word & 0x40000000) { k -= 1; }
+        return k;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	int k;
+
+	k = 31;
+	if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+	if (word & 0x00ff0000) { k -= 8;  word <<= 8;  }
+	if (word & 0x0f000000) { k -= 4;  word <<= 4;  }
+	if (word & 0x30000000) { k -= 2;  word <<= 2;  }
+	if (word & 0x40000000) { k -= 1; }
+        return k;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+#else
+
+/*
+ * On ARMv5 and above those functions can be implemented around
+ * the clz instruction for much better code efficiency.
+ */
+
+static __inline__ int generic_fls(int x);
+#define fls(x) \
+	( __builtin_constant_p(x) ? generic_fls(x) : \
+	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+#define ffz(x) __ffs( ~(x) )
+
+#endif
+
+/*
+ * Find first bit set in a 168-bit bitmap, where the first
+ * 128 bits are unlikely to be set.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	unsigned long v;
+	unsigned int off;
+
+	for (off = 0; v = b[off], off < 4; off++) {
+		if (unlikely(v))
+			break;
+	}
+	return __ffs(v) + off * 32;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p)			\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p)          \
+                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p)			\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p)        \
+                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p)			\
+		__test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off)	\
+		_find_next_zero_bit_le(p,sz,off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p)			\
+		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p)			\
+		__test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p)		\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p)		\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
new file mode 100644
index 000000000000..5e91b90a8181
--- /dev/null
+++ b/include/asm-arm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _ASMARM_BUG_H
+#define _ASMARM_BUG_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern volatile void __bug(const char *file, int line, void *data);
+
+/* give file/line information */
+#define BUG()		__bug(__FILE__, __LINE__, NULL)
+
+#else
+
+/* this just causes an oops */
+#define BUG()		(*(int *)0 = 0)
+
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h
new file mode 100644
index 000000000000..4c80ec519d45
--- /dev/null
+++ b/include/asm-arm/bugs.h
@@ -0,0 +1,17 @@
+/*
+ *  linux/include/asm-arm/bugs.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+extern void check_writebuffer_bugs(void);
+
+#define check_bugs() check_writebuffer_bugs()
+
+#endif
diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h
new file mode 100644
index 000000000000..d648a1915c33
--- /dev/null
+++ b/include/asm-arm/byteorder.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+
+#include <asm/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif
+
diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h
new file mode 100644
index 000000000000..8d161f7c87ff
--- /dev/null
+++ b/include/asm-arm/cache.h
@@ -0,0 +1,15 @@
+/*
+ *  linux/include/asm-arm/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+/*
+ * largest L1 which this arch supports
+ */
+#define L1_CACHE_SHIFT_MAX	5
+
+#endif
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
new file mode 100644
index 000000000000..09ffeed507c2
--- /dev/null
+++ b/include/asm-arm/cacheflush.h
@@ -0,0 +1,387 @@
+/*
+ *  linux/include/asm-arm/cacheflush.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/mman.h>
+#include <asm/glue.h>
+
+/*
+ *	Cache Model
+ *	===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM720T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_V6)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v6
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
+ *	implement these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive;
+ *	start addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information.
+ *	Please note that the implementation of these, and the required
+ *	effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ *	flush_cache_kern_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_cache_user_mm(mm)
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_cache_user_range(start, end, flags)
+ *
+ *		Clean and invalidate a range of cache entries in the
+ *		specified address space before a change of page tables.
+ *		- start - user start address (inclusive, page aligned)
+ *		- end   - user end address   (exclusive, page aligned)
+ *		- flags - vma->vm_flags field
+ *
+ *	coherent_kern_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	DMA Cache Coherency
+ *	===================
+ *
+ *	dma_inv_range(start, end)
+ *
+ *		Invalidate (discard) the specified virtual address range.
+ *		May not write back any entries.  If 'start' or 'end'
+ *		are not cache line aligned, those lines must be written
+ *		back.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_clean_range(start, end)
+ *
+ *		Clean (write back) the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_flush_range(start, end)
+ *
+ *		Clean and invalidate the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ */
+
+struct cpu_cache_fns {
+	void (*flush_kern_all)(void);
+	void (*flush_user_all)(void);
+	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
+
+	void (*coherent_kern_range)(unsigned long, unsigned long);
+	void (*coherent_user_range)(unsigned long, unsigned long);
+	void (*flush_kern_dcache_page)(void *);
+
+	void (*dma_inv_range)(unsigned long, unsigned long);
+	void (*dma_clean_range)(unsigned long, unsigned long);
+	void (*dma_flush_range)(unsigned long, unsigned long);
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_CACHE
+
+extern struct cpu_cache_fns cpu_cache;
+
+#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
+#define __cpuc_flush_user_all		cpu_cache.flush_user_all
+#define __cpuc_flush_user_range		cpu_cache.flush_user_range
+#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
+#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
+#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			cpu_cache.dma_inv_range
+#define dmac_clean_range		cpu_cache.dma_clean_range
+#define dmac_flush_range		cpu_cache.dma_flush_range
+
+#else
+
+#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_page(void *);
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
+#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
+#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
+
+extern void dmac_inv_range(unsigned long, unsigned long);
+extern void dmac_clean_range(unsigned long, unsigned long);
+extern void dmac_flush_range(unsigned long, unsigned long);
+
+#endif
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  Since the
+ * direct-mappings of these pages may contain cached data, we need
+ * to do a full cache flush to ensure that writebacks don't corrupt
+ * data placed into these pages via the new mappings.
+ */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_dcache_page(page);			\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_cache_all()		__cpuc_flush_kern_all()
+
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		__cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+					vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = user_addr & PAGE_MASK;
+		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+	}
+}
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the ARM private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma,start,end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+extern void flush_dcache_page(struct page *);
+
+#define flush_dcache_mmap_lock(mapping) \
+	write_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	write_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma,page,addr,len) \
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma,page)	do { } while (0)
+
+#define __cacheid_present(val)		(val != read_cpuid(CPUID_ID))
+#define __cacheid_vivt(val)		((val & (15 << 25)) != (14 << 25))
+#define __cacheid_vipt(val)		((val & (15 << 25)) == (14 << 25))
+#define __cacheid_vipt_nonaliasing(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
+#define __cacheid_vipt_aliasing(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
+
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+
+#define cache_is_vivt()			1
+#define cache_is_vipt()			0
+#define cache_is_vipt_nonaliasing()	0
+#define cache_is_vipt_aliasing()	0
+
+#elif defined(CONFIG_CPU_CACHE_VIPT)
+
+#define cache_is_vivt()			0
+#define cache_is_vipt()			1
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_aliasing(__val);				\
+	})
+
+#else
+
+#define cache_is_vivt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
+	})
+		
+#define cache_is_vipt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) && __cacheid_vipt(__val);	\
+	})
+
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_aliasing(__val);			\
+	})
+
+#endif
+
+#endif
diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h
new file mode 100644
index 000000000000..d4256d5f3a7c
--- /dev/null
+++ b/include/asm-arm/checksum.h
@@ -0,0 +1,160 @@
+/*
+ *  linux/include/asm-arm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int
+csum_partial_copy_nocheck(const char *src, char *dst, int len, int sum);
+
+unsigned int
+csum_partial_copy_from_user(const char __user *src, char *dst, int len, int sum, int *err_ptr);
+
+/*
+ * This is the old (and unsafe) way of doing checksums, a warning message will
+ * be printed if it is used and an exception occurs.
+ *
+ * this functions should go away after some time.
+ */
+#define csum_partial_copy(src,dst,len,sum)	csum_partial_copy_nocheck(src,dst,len,sum)
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline unsigned short
+ip_fast_csum(unsigned char * iph, unsigned int ihl)
+{
+	unsigned int sum, tmp1;
+
+	__asm__ __volatile__(
+	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
+	ldr	%3, [%1], #4					\n\
+	sub	%2, %2, #5					\n\
+	adds	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+1:	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	tst	%2, #15			@ do this carefully	\n\
+	subne	%2, %2, #1		@ without destroying	\n\
+	bne	1b			@ the carry flag	\n\
+	adcs	%0, %0, %3					\n\
+	adc	%0, %0, #0					\n\
+	adds	%0, %0, %0, lsl #16				\n\
+	addcs	%0, %0, #0x10000				\n\
+	mvn	%0, %0						\n\
+	mov	%0, %0, lsr #16"
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+	: "1" (iph), "2" (ihl)
+	: "cc");
+	return sum;
+}
+
+/*
+ * 	Fold a partial checksum without adding pseudo headers
+ */
+static inline unsigned int
+csum_fold(unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %1, lsl #16	@ csum_fold		\n\
+	addcs	%0, %0, #0x10000"
+	: "=r" (sum)
+	: "r" (sum)
+	: "cc");
+	return (~sum) >> 16;
+}
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		   unsigned int proto, unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
+	adcs	%0, %0, %3					\n\
+	adcs	%0, %0, %4					\n\
+	adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+	: "cc");
+	return sum;
+}	
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned int proto, unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_magic	\n\
+	adcs	%0, %0, %3					\n\
+	adcs	%0, %0, %4					\n\
+	adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0					\n\
+	adds	%0, %0, %0, lsl #16				\n\
+	addcs	%0, %0, #0x10000				\n\
+	mvn	%0, %0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+	: "cc");
+	return sum >> 16;
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short
+ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern unsigned long
+__csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+		__u32 proto, unsigned int sum);
+
+static inline unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+		unsigned short proto, unsigned int sum)
+{
+	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+					   htonl(proto), sum));
+}
+#endif
diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h
new file mode 100644
index 000000000000..ff48022e4720
--- /dev/null
+++ b/include/asm-arm/cpu-multi32.h
@@ -0,0 +1,64 @@
+/*
+ *  linux/include/asm-arm/cpu-multi32.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/page.h>
+
+struct mm_struct;
+
+/*
+ * Don't change this structure - ASM code
+ * relies on it.
+ */
+extern struct processor {
+	/* MISC
+	 * get data abort address/flags
+	 */
+	void (*_data_abort)(unsigned long pc);
+	/*
+	 * Set up any processor specifics
+	 */
+	void (*_proc_init)(void);
+	/*
+	 * Disable any processor specifics
+	 */
+	void (*_proc_fin)(void);
+	/*
+	 * Special stuff for a reset
+	 */
+	volatile void (*reset)(unsigned long addr);
+	/*
+	 * Idle the processor
+	 */
+	int (*_do_idle)(void);
+	/*
+	 * Processor architecture specific
+	 */
+	/*
+	 * clean a virtual address range from the
+	 * D-cache without flushing the cache.
+	 */
+	void (*dcache_clean_area)(void *addr, int size);
+
+	/*
+	 * Set the page table
+	 */
+	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+	/*
+	 * Set a PTE
+	 */
+	void (*set_pte)(pte_t *ptep, pte_t pte);
+} processor;
+
+#define cpu_proc_init()			processor._proc_init()
+#define cpu_proc_fin()			processor._proc_fin()
+#define cpu_reset(addr)			processor.reset(addr)
+#define cpu_do_idle()			processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte(ptep, pte)		processor.set_pte(ptep, pte)
+#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h
new file mode 100644
index 000000000000..b5ec5d54665d
--- /dev/null
+++ b/include/asm-arm/cpu-single.h
@@ -0,0 +1,44 @@
+/*
+ *  linux/include/asm-arm/cpu-single.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Single CPU
+ */
+#ifdef __STDC__
+#define __catify_fn(name,x)	name##x
+#else
+#define __catify_fn(name,x)	name/**/x
+#endif
+#define __cpu_fn(name,x)	__catify_fn(name,x)
+
+/*
+ * If we are supporting multiple CPUs, then we must use a table of
+ * function pointers for this lot.  Otherwise, we can optimise the
+ * table away.
+ */
+#define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
+#define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
+#define cpu_reset			__cpu_fn(CPU_NAME,_reset)
+#define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm		__cpu_fn(CPU_NAME,_switch_mm)
+#define cpu_set_pte			__cpu_fn(CPU_NAME,_set_pte)
+
+#include <asm/page.h>
+
+struct mm_struct;
+
+/* declare all the functions as extern */
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte(pte_t *ptep, pte_t pte);
+extern volatile void cpu_reset(unsigned long addr);
diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h
new file mode 100644
index 000000000000..fcbdd40cb667
--- /dev/null
+++ b/include/asm-arm/cpu.h
@@ -0,0 +1,25 @@
+/*
+ *  linux/include/asm-arm/cpu.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_CPU_H
+#define __ASM_ARM_CPU_H
+
+#include <linux/config.h>
+#include <linux/percpu.h>
+
+struct cpuinfo_arm {
+	struct cpu	cpu;
+#ifdef CONFIG_SMP
+	unsigned int	loops_per_jiffy;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
+
+#endif
diff --git a/include/asm-arm/cputime.h b/include/asm-arm/cputime.h
new file mode 100644
index 000000000000..3a8002a5fec7
--- /dev/null
+++ b/include/asm-arm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_CPUTIME_H
+#define __ARM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ARM_CPUTIME_H */
diff --git a/include/asm-arm/current.h b/include/asm-arm/current.h
new file mode 100644
index 000000000000..75d21e2a3ff7
--- /dev/null
+++ b/include/asm-arm/current.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_CURRENT_H
+#define _ASMARM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+static inline struct task_struct *get_current(void) __attribute_const__;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASMARM_CURRENT_H */
diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h
new file mode 100644
index 000000000000..1704360e9699
--- /dev/null
+++ b/include/asm-arm/delay.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 1995-2004 Russell King
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+#ifndef __ASM_ARM_DELAY_H
+#define __ASM_ARM_DELAY_H
+
+extern void __delay(int loops);
+
+/*
+ * This function intentionally does not exist; if you see references to
+ * it, it means that you're calling udelay() with an out of range value.
+ *
+ * With currently imposed limits, this means that we support a max delay
+ * of 2000us and 671 bogomips
+ */
+extern void __bad_udelay(void);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+extern void __udelay(unsigned long usecs);
+extern void __const_udelay(unsigned long);
+
+#define MAX_UDELAY_MS 2
+
+#define udelay(n)						\
+	(__builtin_constant_p(n) ?				\
+	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :	\
+			__const_udelay((n) * 0x68dbul)) :	\
+	  __udelay(n))
+
+#endif /* defined(_ARM_DELAY_H) */
+
diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h
new file mode 100644
index 000000000000..3682616804ca
--- /dev/null
+++ b/include/asm-arm/div64.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_ARM_DIV64
+#define __ASM_ARM_DIV64
+
+#include <asm/system.h>
+
+/*
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * In other words, a 64-bit dividend with a 32-bit divisor producing
+ * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
+ * we call a special __do_div64 helper with completely non standard
+ * calling convention for arguments and results (beware).
+ */
+
+#ifdef __ARMEB__
+#define __xh "r0"
+#define __xl "r1"
+#else
+#define __xl "r0"
+#define __xh "r1"
+#endif
+
+#define do_div(n,base)						\
+({								\
+	register unsigned int __base      asm("r4") = base;	\
+	register unsigned long long __n   asm("r0") = n;	\
+	register unsigned long long __res asm("r2");		\
+	register unsigned int __rem       asm(__xh);		\
+	asm(	__asmeq("%0", __xh)				\
+		__asmeq("%1", "r2")				\
+		__asmeq("%2", "r0")				\
+		__asmeq("%3", "r4")				\
+		"bl	__do_div64"				\
+		: "=r" (__rem), "=r" (__res)			\
+		: "r" (__n), "r" (__base)			\
+		: "ip", "lr", "cc");				\
+	n = __res;						\
+	__rem;							\
+})
+
+#endif
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
new file mode 100644
index 000000000000..925d016dd4b5
--- /dev/null
+++ b/include/asm-arm/dma-mapping.h
@@ -0,0 +1,426 @@
+#ifndef ASMARM_DMA_MAPPING_H
+#define ASMARM_DMA_MAPPING_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/mm.h> /* need struct page */
+
+#include <asm/scatterlist.h>
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ */
+extern void consistent_sync(void *kaddr, size_t size, int rw);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return dev->dma_mask && *dev->dma_mask != 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+
+static inline int dma_is_consistent(dma_addr_t handle)
+{
+	return 0;
+}
+
+/*
+ * DMA errors are defined by all-bits-set in the DMA address.
+ */
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return dma_addr == ~0;
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle);
+
+/**
+ * dma_mmap_coherent - map a coherent DMA allocation into user space
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @vma: vm_area_struct describing requested user mapping
+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ * @size: size of memory originally requested in dma_alloc_coherent
+ *
+ * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
+ * into user space.  The coherent DMA buffer must not be freed by the
+ * driver until the user space mapping has been released.
+ */
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_alloc_writecombine - allocate writecombining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+
+#define dma_free_writecombine(dev,size,cpu_addr,handle) \
+	dma_free_coherent(dev,size,cpu_addr,handle)
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or
+ * dma_sync_single_for_cpu().
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	consistent_sync(cpu_addr, size, dir);
+	return virt_to_dma(dev, (unsigned long)cpu_addr);
+}
+#else
+extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or
+ * dma_sync_single_for_cpu().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
+		 enum dma_data_direction dir)
+{
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
+	       enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, handle, size, (int)dir);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above dma_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt;
+
+		sg->dma_address = page_to_dma(dev, sg->page) + sg->offset;
+		virt = page_address(sg->page) + sg->offset;
+		consistent_sync(virt, sg->length, dir);
+	}
+
+	return nents;
+}
+#else
+extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * dma_unmap_single() above.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+	     enum dma_data_direction dir)
+{
+
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_single_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first the perform a dma_sync_for_device, and then the
+ * device again owns the buffer.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
+{
+	consistent_sync((void *)dma_to_virt(dev, handle), size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	consistent_sync((void *)dma_to_virt(dev, handle), size, dir);
+}
+#else
+extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = page_address(sg->page) + sg->offset;
+		consistent_sync(virt, sg->length, dir);
+	}
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+		       enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = page_address(sg->page) + sg->offset;
+		consistent_sync(virt, sg->length, dir);
+	}
+}
+#else
+extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
+#endif
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering sytems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#endif /* CONFIG_DMABOUNCE */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h
new file mode 100644
index 000000000000..ef41df43a584
--- /dev/null
+++ b/include/asm-arm/dma.h
@@ -0,0 +1,135 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+#include <asm/arch/dma.h>
+
+/*
+ * DMA modes
+ */
+typedef unsigned int dmamode_t;
+
+#define DMA_MODE_MASK	3
+
+#define DMA_MODE_READ	 0
+#define DMA_MODE_WRITE	 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT	 4
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ *       be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int  request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_addr(dmach_t channel, unsigned long physaddr);
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int  get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA	255
+#endif
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
new file mode 100644
index 000000000000..da1d960387d9
--- /dev/null
+++ b/include/asm-arm/domain.h
@@ -0,0 +1,52 @@
+/*
+ *  linux/include/asm-arm/domain.h
+ *
+ *  Copyright (C) 1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_DOMAIN_H
+#define __ASM_PROC_DOMAIN_H
+
+/*
+ * Domain numbers
+ *
+ *  DOMAIN_IO     - domain 2 includes all IO only
+ *  DOMAIN_USER   - domain 1 includes all user memory only
+ *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
+ */
+#define DOMAIN_KERNEL	0
+#define DOMAIN_TABLE	0
+#define DOMAIN_USER	1
+#define DOMAIN_IO	2
+
+/*
+ * Domain types
+ */
+#define DOMAIN_NOACCESS	0
+#define DOMAIN_CLIENT	1
+#define DOMAIN_MANAGER	3
+
+#define domain_val(dom,type)	((type) << (2*(dom)))
+
+#ifndef __ASSEMBLY__
+#define set_domain(x)					\
+	do {						\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
+	  : : "r" (x));					\
+	} while (0)
+
+#define modify_domain(dom,type)					\
+	do {							\
+	struct thread_info *thread = current_thread_info();	\
+	unsigned int domain = thread->cpu_domain;		\
+	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
+	thread->cpu_domain = domain | domain_val(dom, type);	\
+	set_domain(thread->cpu_domain);				\
+	} while (0)
+
+#endif
+#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
new file mode 100644
index 000000000000..a0ae2b954d29
--- /dev/null
+++ b/include/asm-arm/ecard.h
@@ -0,0 +1,298 @@
+/*
+ * linux/include/asm-arm/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ *  11-12-1996	RMK	Further minor improvements
+ *  12-09-1997	RMK	Added interrupt enable/disable for card level
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ *                        Manufacturer  Product ID
+ */
+#define MANU_ACORN		0x0000
+#define PROD_ACORN_SCSI			0x0002
+#define PROD_ACORN_ETHER1		0x0003
+#define PROD_ACORN_MFM			0x000b
+
+#define MANU_ANT2		0x0011
+#define PROD_ANT_ETHER3			0x00a4
+
+#define MANU_ATOMWIDE		0x0017
+#define PROD_ATOMWIDE_3PSERIAL		0x0090
+
+#define MANU_IRLAM_INSTRUMENTS	0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
+
+#define MANU_OAK		0x0021
+#define PROD_OAK_SCSI			0x0058
+
+#define MANU_MORLEY		0x002b
+#define PROD_MORLEY_SCSI_UNCACHED	0x0067
+
+#define MANU_CUMANA		0x003a
+#define PROD_CUMANA_SCSI_2		0x003a
+#define PROD_CUMANA_SCSI_1		0x00a0
+
+#define MANU_ICS		0x003c
+#define PROD_ICS_IDE			0x00ae
+
+#define MANU_ICS2		0x003d
+#define PROD_ICS2_IDE			0x00ae
+
+#define MANU_SERPORT		0x003f
+#define PROD_SERPORT_DSPORT		0x00b9
+
+#define MANU_ARXE		0x0041
+#define PROD_ARXE_SCSI			0x00be
+
+#define MANU_I3			0x0046
+#define PROD_I3_ETHERLAN500		0x00d4
+#define PROD_I3_ETHERLAN600		0x00ec
+#define PROD_I3_ETHERLAN600A		0x011e
+
+#define MANU_ANT		0x0053
+#define PROD_ANT_ETHERM			0x00d8
+#define PROD_ANT_ETHERB			0x00e4
+
+#define MANU_ALSYSTEMS		0x005b
+#define PROD_ALSYS_SCSIATAPI		0x0107
+
+#define MANU_MCS		0x0063
+#define PROD_MCS_CONNECT32		0x0125
+
+#define MANU_EESOX		0x0064
+#define PROD_EESOX_SCSI2		0x008c
+
+#define MANU_YELLOWSTONE	0x0096
+#define PROD_YELLOWSTONE_RAPIDE32	0x0120
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS	9
+
+typedef enum {				/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;
+
+struct ecard_id {			/* Card ID structure		*/
+	unsigned short	manufacturer;
+	unsigned short	product;
+	void		*data;
+};
+
+struct in_ecid {			/* Packed card ID information	*/
+	unsigned short	product;	/* Product code			*/
+	unsigned short	manufacturer;	/* Manufacturer code		*/
+	unsigned char	id:4;		/* Simple ID			*/
+	unsigned char	cd:1;		/* Chunk dir present		*/
+	unsigned char	is:1;		/* Interrupt status pointers	*/
+	unsigned char	w:2;		/* Width			*/
+	unsigned char	country;	/* Country			*/
+	unsigned char	irqmask;	/* IRQ mask			*/
+	unsigned char	fiqmask;	/* FIQ mask			*/
+	unsigned long	irqoff;		/* IRQ offset			*/
+	unsigned long	fiqoff;		/* FIQ offset			*/
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct {			/* Card handler routines	*/
+	void (*irqenable)(ecard_t *ec, int irqnr);
+	void (*irqdisable)(ecard_t *ec, int irqnr);
+	int  (*irqpending)(ecard_t *ec);
+	void (*fiqenable)(ecard_t *ec, int fiqnr);
+	void (*fiqdisable)(ecard_t *ec, int fiqnr);
+	int  (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES	(6)
+
+#define ECARD_RES_IOCSLOW	(0)
+#define ECARD_RES_IOCMEDIUM	(1)
+#define ECARD_RES_IOCFAST	(2)
+#define ECARD_RES_IOCSYNC	(3)
+#define ECARD_RES_MEMC		(4)
+#define ECARD_RES_EASI		(5)
+
+#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
+					 (ec)->resource[nr].start + 1)
+#define ecard_resource_flags(ec,nr)	((ec)->resource[nr].flags)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+	struct expansion_card  *next;
+
+	struct device		dev;
+	struct resource		resource[ECARD_NUM_RESOURCES];
+
+	/* Public data */
+	void __iomem		*irqaddr;	/* address of IRQ register	*/
+	void __iomem		*fiqaddr;	/* address of FIQ register	*/
+	unsigned char		irqmask;	/* IRQ mask			*/
+	unsigned char		fiqmask;	/* FIQ mask			*/
+	unsigned char  		claimed;	/* Card claimed?		*/
+
+	void			*irq_data;	/* Data for use for IRQ by card	*/
+	void			*fiq_data;	/* Data for use for FIQ by card	*/
+	const expansioncard_ops_t *ops;		/* Enable/Disable Ops for card	*/
+
+	CONST unsigned int	slot_no;	/* Slot number			*/
+	CONST unsigned int	dma;		/* DMA number (for request_dma)	*/
+	CONST unsigned int	irq;		/* IRQ number (for request_irq)	*/
+	CONST unsigned int	fiq;		/* FIQ number (for request_irq)	*/
+	CONST card_type_t	type;		/* Type of card			*/
+	CONST struct in_ecid	cid;		/* Card Identification		*/
+
+	/* Private internal data */
+	const char		*card_desc;	/* Card description		*/
+	CONST unsigned int	podaddr;	/* Base Linux address for card	*/
+	CONST loader_t		loader;		/* loader program */
+	u64			dma_mask;
+};
+
+struct in_chunk_dir {
+	unsigned int start_offset;
+	union {
+		unsigned char string[256];
+		unsigned char data[1];
+	} d;
+};
+
+/*
+ * ecard_claim: claim an expansion card entry
+ */
+#define ecard_claim(ec) ((ec)->claimed = 1)
+
+/*
+ * ecard_release: release an expansion card entry
+ */
+#define ecard_release(ec) ((ec)->claimed = 0)
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Obtain the address of a card.  This returns the "old style" address
+ * and should no longer be used.
+ */
+static inline unsigned int __deprecated
+ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed)
+{
+	extern unsigned int __ecard_address(struct expansion_card *,
+					    card_type_t, card_speed_t);
+	return __ecard_address(ec, type, speed);
+}
+
+/*
+ * Request and release ecard resources
+ */
+extern int ecard_request_resources(struct expansion_card *ec);
+extern void ecard_release_resources(struct expansion_card *ec);
+
+#ifdef ECARD_C
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+	unsigned char	r_irq:1;
+	unsigned char	r_zero:1;
+	unsigned char	r_fiq:1;
+	unsigned char	r_id:4;
+	unsigned char	r_a:1;
+
+	unsigned char	r_cd:1;
+	unsigned char	r_is:1;
+	unsigned char	r_w:2;
+	unsigned char	r_r1:4;
+
+	unsigned char	r_r2:8;
+
+	unsigned char	r_prod[2];
+
+	unsigned char	r_manu[2];
+
+	unsigned char	r_country;
+
+	unsigned char	r_fiqmask;
+	unsigned char	r_fiqoff[3];
+
+	unsigned char	r_irqmask;
+	unsigned char	r_irqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+	unsigned char r_id;
+	unsigned char r_len[3];
+	unsigned long r_start;
+	union {
+		char string[256];
+		char data[1];
+	} d;
+#define c_id(x)		((x)->r_id)
+#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x)	((x)->r_start)
+};
+
+#endif
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
+	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
+	const struct ecard_id	*id_table;
+	unsigned int		id;
+	struct device_driver	drv;
+};
+
+#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
new file mode 100644
index 000000000000..cbceacbe5afa
--- /dev/null
+++ b/include/asm-arm/elf.h
@@ -0,0 +1,133 @@
+#ifndef __ASMARM_ELF_H
+#define __ASMARM_ELF_H
+
+#include <linux/config.h>
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/procinfo.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define EM_ARM	40
+#define EF_ARM_APCS26 0x08
+#define EF_ARM_SOFT_FLOAT 0x200
+#define EF_ARM_EABI_MASK 0xFF000000
+
+#define R_ARM_NONE	0
+#define R_ARM_PC24	1
+#define R_ARM_ABS32	2
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fp elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __ARMEB__
+#define ELF_DATA	ELFDATA2MSB;
+#else
+#define ELF_DATA	ELFDATA2LSB;
+#endif
+#define ELF_ARCH	EM_ARM
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be 
+   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
+   have no such handler.  */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports. */
+
+#define ELF_HWCAP	(elf_hwcap)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+/* For now we just provide a fairly general string that describes the
+   processor family.  This could be made more specific later if someone
+   implemented optimisations that require it.  26-bit CPUs give you
+   "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+   supported).  32-bit CPUs give you "v3[lb]" for anything based on an
+   ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
+   core.  */
+
+#define ELF_PLATFORM_SIZE 8
+extern char elf_platform[];
+#define ELF_PLATFORM	(elf_platform)
+
+#ifdef __KERNEL__
+
+/*
+ * 32-bit code is always OK.  Some cpus can do 26-bit, some can't.
+ */
+#define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
+
+#define ELF_THUMB_OK(x) \
+	(( (elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 1) == 1) || \
+	 ((x)->e_entry & 3) == 0)
+
+#define ELF_26BIT_OK(x) \
+	(( (elf_hwcap & HWCAP_26BIT) && (x)->e_flags & EF_ARM_APCS26) || \
+	  ((x)->e_flags & EF_ARM_APCS26) == 0)
+
+#ifndef CONFIG_IWMMXT
+
+/* Old NetWinder binaries were compiled in such a way that the iBCS
+   heuristic always trips on them.  Until these binaries become uncommon
+   enough not to care, don't trust the `ibcs' flag here.  In any case
+   there is no other ELF system currently supported by iBCS.
+   @@ Could print a warning message to encourage users to upgrade.  */
+#define SET_PERSONALITY(ex,ibcs2) \
+	set_personality(((ex).e_flags&EF_ARM_APCS26 ?PER_LINUX :PER_LINUX_32BIT))
+
+#else
+
+/*
+ * All iWMMXt capable CPUs don't support 26-bit mode.  Yet they can run
+ * legacy binaries which used to contain FPA11 floating point instructions
+ * that have always been emulated by the kernel.  PFA11 and iWMMXt overlap
+ * on coprocessor 1 space though.  We therefore must decide if given task
+ * is allowed to use CP 0 and 1 for iWMMXt, or if they should be blocked
+ * at all times for the prefetch exception handler to catch FPA11 opcodes
+ * and emulate them.  The best indication to discriminate those two cases
+ * is the SOFT_FLOAT flag in the ELF header.
+ */
+
+#define SET_PERSONALITY(ex,ibcs2) \
+do { \
+	set_personality(PER_LINUX_32BIT); \
+	if (((ex).e_flags & EF_ARM_EABI_MASK) || \
+	    ((ex).e_flags & EF_ARM_SOFT_FLOAT)) \
+		set_thread_flag(TIF_USING_IWMMXT); \
+} while (0)
+
+#endif
+
+#endif
+
+#endif
diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h
new file mode 100644
index 000000000000..6e60f0612bb6
--- /dev/null
+++ b/include/asm-arm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-arm/fcntl.h b/include/asm-arm/fcntl.h
new file mode 100644
index 000000000000..485b6bdf4d7a
--- /dev/null
+++ b/include/asm-arm/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif
diff --git a/include/asm-arm/fiq.h b/include/asm-arm/fiq.h
new file mode 100644
index 000000000000..a3bad09e825c
--- /dev/null
+++ b/include/asm-arm/fiq.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-arm/fiq.h
+ *
+ * Support for FIQ on ARM architectures.
+ * Written by Philip Blundell <philb@gnu.org>, 1998
+ * Re-written by Russell King
+ */
+
+#ifndef __ASM_FIQ_H
+#define __ASM_FIQ_H
+
+#include <asm/ptrace.h>
+
+struct fiq_handler {
+	struct fiq_handler *next;
+	/* Name
+	 */
+	const char *name;
+	/* Called to ask driver to relinquish/
+	 * reacquire FIQ
+	 * return zero to accept, or -<errno>
+	 */
+	int (*fiq_op)(void *, int relinquish);
+	/* data for the relinquish/reacquire functions
+	 */
+	void *dev_id;
+};
+
+extern int claim_fiq(struct fiq_handler *f);
+extern void release_fiq(struct fiq_handler *f);
+extern void set_fiq_handler(void *start, unsigned int length);
+extern void set_fiq_regs(struct pt_regs *regs);
+extern void get_fiq_regs(struct pt_regs *regs);
+extern void enable_fiq(int fiq);
+extern void disable_fiq(int fiq);
+
+#endif
diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h
new file mode 100644
index 000000000000..6ea657c886b9
--- /dev/null
+++ b/include/asm-arm/floppy.h
@@ -0,0 +1,144 @@
+/*
+ *  linux/include/asm-arm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+#if 0
+#include <asm/arch/floppy.h>
+#endif
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+#define fd_enable_dma()		enable_dma(DMA_FLOPPY)
+#define fd_clear_dma_ff()	clear_dma_ff(DMA_FLOPPY)
+#define fd_set_dma_mode(mode)	set_dma_mode(DMA_FLOPPY, (mode))
+#define fd_set_dma_addr(addr)	set_dma_addr(DMA_FLOPPY, virt_to_bus((addr)))
+#define fd_set_dma_count(len)	set_dma_count(DMA_FLOPPY, (len))
+#define fd_cacheflush(addr,sz)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
new file mode 100644
index 000000000000..f7430e3aa55d
--- /dev/null
+++ b/include/asm-arm/fpstate.h
@@ -0,0 +1,74 @@
+/*
+ *  linux/include/asm-arm/fpstate.h
+ *
+ *  Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FPSTATE_H
+#define __ASM_ARM_FPSTATE_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * VFP storage area has:
+ *  - FPEXC, FPSCR, FPINST and FPINST2.
+ *  - 16 double precision data registers
+ *  - an implementation-dependant word of state for FLDMX/FSTMX
+ * 
+ *  FPEXC will always be non-zero once the VFP has been used in this process.
+ */
+
+struct vfp_hard_struct {
+	__u64 fpregs[16];
+	__u32 fpmx_state;
+	__u32 fpexc;
+	__u32 fpscr;
+	/*
+	 * VFP implementation specific state
+	 */
+	__u32 fpinst;
+	__u32 fpinst2;
+};
+
+union vfp_state {
+	struct vfp_hard_struct	hard;
+};
+
+extern void vfp_flush_thread(union vfp_state *);
+extern void vfp_release_thread(union vfp_state *);
+
+#define FP_HARD_SIZE 35
+
+struct fp_hard_struct {
+	unsigned int save[FP_HARD_SIZE];		/* as yet undefined */
+};
+
+#define FP_SOFT_SIZE 35
+
+struct fp_soft_struct {
+	unsigned int save[FP_SOFT_SIZE];		/* undefined information */
+};
+
+struct iwmmxt_struct {
+	unsigned int save[0x98/sizeof(int) + 1];
+};
+
+union fp_state {
+	struct fp_hard_struct	hard;
+	struct fp_soft_struct	soft;
+#ifdef CONFIG_IWMMXT
+	struct iwmmxt_struct	iwmmxt;
+#endif
+};
+
+#define FP_SIZE (sizeof(union fp_state) / sizeof(int))
+
+#endif
+
+#endif
diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h
new file mode 100644
index 000000000000..223e0d6c41be
--- /dev/null
+++ b/include/asm-arm/glue.h
@@ -0,0 +1,114 @@
+/*
+ *  linux/include/asm-arm/glue.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file provides the glue to stick the processor-specific bits
+ *  into the kernel in an efficient manner.  The idea is to use branches
+ *  when we're only targetting one class of TLB, or indirect calls
+ *  when we're targetting multiple classes of TLBs.
+ */
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifdef __STDC__
+#define ____glue(name,fn)	name##fn
+#else
+#define ____glue(name,fn)	name/**/fn
+#endif
+#define __glue(name,fn)		____glue(name,fn)
+
+
+
+/*
+ *	Data Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  arm6          - ARM6 style
+ *	  arm7		- ARM7 style
+ *	  v4_early	- ARMv4 without Thumb early abort handler
+ *	  v4t_late	- ARMv4 with Thumb late abort handler
+ *	  v4t_early	- ARMv4 with Thumb early abort handler
+ *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
+ *	  xscale	- ARMv5 with Thumb with Xscale extensions
+ *	  v6_early	- ARMv6 generic early abort handler
+ */
+#undef CPU_ABORT_HANDLER
+#undef MULTI_ABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_ABORT_HANDLER
+#  define MULTI_ABORT 1
+# else
+#  define CPU_ABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifndef CPU_ABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+#endif
diff --git a/include/asm-arm/hardirq.h b/include/asm-arm/hardirq.h
new file mode 100644
index 000000000000..e5ccb6b8ff83
--- /dev/null
+++ b/include/asm-arm/hardirq.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h
new file mode 100644
index 000000000000..1fd1a5b6504b
--- /dev/null
+++ b/include/asm-arm/hardware.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/hardware.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Common hardware definitions
+ */
+
+#ifndef __ASM_HARDWARE_H
+#define __ASM_HARDWARE_H
+
+#include <asm/arch/hardware.h>
+
+#endif
diff --git a/include/asm-arm/hardware/amba.h b/include/asm-arm/hardware/amba.h
new file mode 100644
index 000000000000..51e6e54b2aa1
--- /dev/null
+++ b/include/asm-arm/hardware/amba.h
@@ -0,0 +1,55 @@
+/*
+ *  linux/include/asm-arm/hardware/amba.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_AMBA_H
+#define ASMARM_AMBA_H
+
+#define AMBA_NR_IRQS	2
+
+struct amba_device {
+	struct device		dev;
+	struct resource		res;
+	u64			dma_mask;
+	unsigned int		periphid;
+	unsigned int		irq[AMBA_NR_IRQS];
+};
+
+struct amba_id {
+	unsigned int		id;
+	unsigned int		mask;
+	void			*data;
+};
+
+struct amba_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct amba_device *, void *);
+	int			(*remove)(struct amba_device *);
+	void			(*shutdown)(struct amba_device *);
+	int			(*suspend)(struct amba_device *, pm_message_t);
+	int			(*resume)(struct amba_device *);
+	struct amba_id		*id_table;
+};
+
+#define amba_get_drvdata(d)	dev_get_drvdata(&d->dev)
+#define amba_set_drvdata(d,p)	dev_set_drvdata(&d->dev, p)
+
+int amba_driver_register(struct amba_driver *);
+void amba_driver_unregister(struct amba_driver *);
+int amba_device_register(struct amba_device *, struct resource *);
+void amba_device_unregister(struct amba_device *);
+struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
+int amba_request_regions(struct amba_device *, const char *);
+void amba_release_regions(struct amba_device *);
+
+#define amba_config(d)	(((d)->periphid >> 24) & 0xff)
+#define amba_rev(d)	(((d)->periphid >> 20) & 0x0f)
+#define amba_manf(d)	(((d)->periphid >> 12) & 0xff)
+#define amba_part(d)	((d)->periphid & 0xfff)
+
+#endif
diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h
new file mode 100644
index 000000000000..2149be7c7023
--- /dev/null
+++ b/include/asm-arm/hardware/amba_clcd.h
@@ -0,0 +1,264 @@
+/*
+ * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * David A Rusling
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/fb.h>
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+#define CLCD_TIM0		0x00000000
+#define CLCD_TIM1 		0x00000004
+#define CLCD_TIM2 		0x00000008
+#define CLCD_TIM3 		0x0000000c
+#define CLCD_UBAS 		0x00000010
+#define CLCD_LBAS 		0x00000014
+
+#ifndef CONFIG_ARCH_VERSATILE
+#define CLCD_IENB 		0x00000018
+#define CLCD_CNTL 		0x0000001c
+#else
+/*
+ * Someone rearranged these two registers on the Versatile
+ * platform...
+ */
+#define CLCD_IENB 		0x0000001c
+#define CLCD_CNTL 		0x00000018
+#endif
+
+#define CLCD_STAT 		0x00000020
+#define CLCD_INTR 		0x00000024
+#define CLCD_UCUR 		0x00000028
+#define CLCD_LCUR 		0x0000002C
+#define CLCD_PALL 		0x00000200
+#define CLCD_PALETTE		0x00000200
+
+#define TIM2_CLKSEL		(1 << 5)
+#define TIM2_IVS		(1 << 11)
+#define TIM2_IHS		(1 << 12)
+#define TIM2_IPC		(1 << 13)
+#define TIM2_IOE		(1 << 14)
+#define TIM2_BCD		(1 << 26)
+
+#define CNTL_LCDEN		(1 << 0)
+#define CNTL_LCDBPP1		(0 << 1)
+#define CNTL_LCDBPP2		(1 << 1)
+#define CNTL_LCDBPP4		(2 << 1)
+#define CNTL_LCDBPP8		(3 << 1)
+#define CNTL_LCDBPP16		(4 << 1)
+#define CNTL_LCDBPP24		(5 << 1)
+#define CNTL_LCDBW		(1 << 4)
+#define CNTL_LCDTFT		(1 << 5)
+#define CNTL_LCDMONO8		(1 << 6)
+#define CNTL_LCDDUAL		(1 << 7)
+#define CNTL_BGR		(1 << 8)
+#define CNTL_BEBO		(1 << 9)
+#define CNTL_BEPO		(1 << 10)
+#define CNTL_LCDPWR		(1 << 11)
+#define CNTL_LCDVCOMP(x)	((x) << 12)
+#define CNTL_LDMAFIFOTIME	(1 << 15)
+#define CNTL_WATERMARK		(1 << 16)
+
+struct clcd_panel {
+	struct fb_videomode	mode;
+	signed short		width;	/* width in mm */
+	signed short		height;	/* height in mm */
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned int		bpp:8,
+				fixedtimings:1,
+				grayscale:1;
+	unsigned int		connector;
+};
+
+struct clcd_regs {
+	u32			tim0;
+	u32			tim1;
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned long		pixclock;
+};
+
+struct clcd_fb;
+
+/*
+ * the board-type specific routines
+ */
+struct clcd_board {
+	const char *name;
+
+	/*
+	 * Optional.  Check whether the var structure is acceptable
+	 * for this display.
+	 */
+	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
+
+	/*
+	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
+	 * fixed timing, set regs->* to the register values required.
+	 */
+	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
+
+	/*
+	 * Optional.  Disable any extra display hardware.
+	 */
+	void	(*disable)(struct clcd_fb *);
+
+	/*
+	 * Optional.  Enable any extra display hardware.
+	 */
+	void	(*enable)(struct clcd_fb *);
+
+	/*
+	 * Setup platform specific parts of CLCD driver
+	 */
+	int	(*setup)(struct clcd_fb *);
+
+	/*
+	 * mmap the framebuffer memory
+	 */
+	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);
+
+	/*
+	 * Remove platform specific parts of CLCD driver
+	 */
+	void	(*remove)(struct clcd_fb *);
+};
+
+struct amba_device;
+struct clk;
+
+/* this data structure describes each frame buffer device we find */
+struct clcd_fb {
+	struct fb_info		fb;
+	struct amba_device	*dev;
+	struct clk		*clk;
+	struct clcd_panel	*panel;
+	struct clcd_board	*board;
+	void			*board_data;
+	void __iomem		*regs;
+	u32			clcd_cntl;
+	u32			cmap[16];
+};
+
+static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	u32 val;
+
+	/*
+	 * Program the CLCD controller registers and start the CLCD
+	 */
+	val = ((fb->fb.var.xres / 16) - 1) << 2;
+	val |= (fb->fb.var.hsync_len - 1) << 8;
+	val |= (fb->fb.var.right_margin - 1) << 16;
+	val |= (fb->fb.var.left_margin - 1) << 24;
+	regs->tim0 = val;
+
+	val = fb->fb.var.yres - 1;
+	val |= (fb->fb.var.vsync_len - 1) << 10;
+	val |= fb->fb.var.lower_margin << 16;
+	val |= fb->fb.var.upper_margin << 24;
+	regs->tim1 = val;
+
+	val = fb->panel->tim2;
+	val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
+	val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
+
+	if (fb->panel->cntl & CNTL_LCDTFT)
+		val |= (fb->fb.var.xres_virtual - 1) << 16;
+	else if (fb->panel->cntl & CNTL_LCDBW)
+		printk("what value for CPL for stnmono panels?");
+	else
+		val |= ((fb->fb.var.xres_virtual * 8 / 3) - 1) << 16;
+	regs->tim2 = val;
+
+	regs->tim3 = fb->panel->tim3;
+
+	val = fb->panel->cntl;
+	if (fb->fb.var.grayscale)
+		val |= CNTL_LCDBW;
+
+	switch (fb->fb.var.bits_per_pixel) {
+	case 1:
+		val |= CNTL_LCDBPP1;
+		break;
+	case 2:
+		val |= CNTL_LCDBPP2;
+		break;
+	case 4:
+		val |= CNTL_LCDBPP4;
+		break;
+	case 8:
+		val |= CNTL_LCDBPP8;
+		break;
+	case 16:
+		val |= CNTL_LCDBPP16;
+		break;
+	case 24:
+		val |= CNTL_LCDBPP24;
+		break;
+	}
+
+	regs->cntl = val;
+	regs->pixclock = fb->fb.var.pixclock;
+}
+
+static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+	var->xres_virtual = var->xres = (var->xres + 7) & ~7;
+	var->yres_virtual = var->yres;
+
+#define CHECK(e,l,h) (var->e < l || var->e > h)
+	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
+	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
+	    CHECK(hsync_len, (5+1), 256) ||
+	    var->xres > 4096 ||
+	    var->lower_margin > 255 ||		/* back porch */
+	    var->upper_margin > 255 ||		/* front porch */
+	    var->vsync_len > 32 ||
+	    var->yres > 1024)
+		return -EINVAL;
+#undef CHECK
+
+	/* single panel mode: PCD = max(PCD, 1) */
+	/* dual panel mode: PCD = max(PCD, 5) */
+
+	/*
+	 * You can't change the grayscale setting, and
+	 * we can only do non-interlaced video.
+	 */
+	if (var->grayscale != fb->fb.var.grayscale ||
+	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+		return -EINVAL;
+
+#define CHECK(e) (var->e != fb->fb.var.e)
+	if (fb->panel->fixedtimings &&
+	    (CHECK(xres)		||
+	     CHECK(yres)		||
+	     CHECK(bits_per_pixel)	||
+	     CHECK(pixclock)		||
+	     CHECK(left_margin)		||
+	     CHECK(right_margin)	||
+	     CHECK(upper_margin)	||
+	     CHECK(lower_margin)	||
+	     CHECK(hsync_len)		||
+	     CHECK(vsync_len)		||
+	     CHECK(sync)))
+		return -EINVAL;
+#undef CHECK
+
+	var->nonstd = 0;
+	var->accel_flags = 0;
+
+	return 0;
+}
diff --git a/include/asm-arm/hardware/amba_kmi.h b/include/asm-arm/hardware/amba_kmi.h
new file mode 100644
index 000000000000..a39e5be751b3
--- /dev/null
+++ b/include/asm-arm/hardware/amba_kmi.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/asm-arm/hardware/amba_kmi.h
+ *
+ *  Internal header file for AMBA KMI ports
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * ---------------------------------------------------------------------------
+ *  From ARM PrimeCell(tm) PS2 Keyboard/Mouse Interface (PL050) Technical
+ *  Reference Manual - ARM DDI 0143B - see http://www.arm.com/
+ * ---------------------------------------------------------------------------
+ */
+#ifndef ASM_ARM_HARDWARE_AMBA_KMI_H
+#define ASM_ARM_HARDWARE_AMBA_KMI_H
+
+/*
+ * KMI control register:
+ *  KMICR_TYPE       0 = PS2/AT mode, 1 = No line control bit mode
+ *  KMICR_RXINTREN   1 = enable RX interrupts
+ *  KMICR_TXINTREN   1 = enable TX interrupts
+ *  KMICR_EN         1 = enable KMI
+ *  KMICR_FD         1 = force KMI data low
+ *  KMICR_FC         1 = force KMI clock low
+ */
+#define KMICR		(KMI_BASE + 0x00)
+#define KMICR_TYPE		(1 << 5)
+#define KMICR_RXINTREN		(1 << 4)
+#define KMICR_TXINTREN		(1 << 3)
+#define KMICR_EN		(1 << 2)
+#define KMICR_FD		(1 << 1)
+#define KMICR_FC		(1 << 0)
+
+/*
+ * KMI status register:
+ *  KMISTAT_TXEMPTY  1 = transmitter register empty
+ *  KMISTAT_TXBUSY   1 = currently sending data
+ *  KMISTAT_RXFULL   1 = receiver register ready to be read
+ *  KMISTAT_RXBUSY   1 = currently receiving data
+ *  KMISTAT_RXPARITY parity of last databyte received
+ *  KMISTAT_IC       current level of KMI clock input
+ *  KMISTAT_ID       current level of KMI data input
+ */
+#define KMISTAT		(KMI_BASE + 0x04)
+#define KMISTAT_TXEMPTY		(1 << 6)
+#define KMISTAT_TXBUSY		(1 << 5)
+#define KMISTAT_RXFULL		(1 << 4)
+#define KMISTAT_RXBUSY		(1 << 3)
+#define KMISTAT_RXPARITY	(1 << 2)
+#define KMISTAT_IC		(1 << 1)
+#define KMISTAT_ID		(1 << 0)
+
+/*
+ * KMI data register
+ */
+#define KMIDATA		(KMI_BASE + 0x08)
+
+/*
+ * KMI clock divisor: to generate 8MHz internal clock
+ *  div = (ref / 8MHz) - 1; 0 <= div <= 15
+ */
+#define KMICLKDIV	(KMI_BASE + 0x0c)
+
+/*
+ * KMI interrupt register:
+ *  KMIIR_TXINTR     1 = transmit interrupt asserted
+ *  KMIIR_RXINTR     1 = receive interrupt asserted
+ */
+#define KMIIR		(KMI_BASE + 0x10)
+#define KMIIR_TXINTR		(1 << 1)
+#define KMIIR_RXINTR		(1 << 0)
+
+/*
+ * The size of the KMI primecell
+ */
+#define KMI_SIZE	(0x100)
+
+#endif
diff --git a/include/asm-arm/hardware/amba_serial.h b/include/asm-arm/hardware/amba_serial.h
new file mode 100644
index 000000000000..71770aa6389f
--- /dev/null
+++ b/include/asm-arm/hardware/amba_serial.h
@@ -0,0 +1,156 @@
+/*
+ *  linux/include/asm-arm/hardware/serial_amba.h
+ *
+ *  Internal header file for AMBA serial ports
+ *
+ *  Copyright (C) ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
+#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
+
+/* -------------------------------------------------------------------------------
+ *  From AMBA UART (PL010) Block Specification
+ * -------------------------------------------------------------------------------
+ *  UART Register Offsets.
+ */
+#define UART01x_DR		0x00	/* Data read or written from the interface. */
+#define UART01x_RSR		0x04	/* Receive status register (Read). */
+#define UART01x_ECR		0x04	/* Error clear register (Write). */
+#define UART010_LCRH		0x08	/* Line control register, high byte. */
+#define UART010_LCRM		0x0C	/* Line control register, middle byte. */
+#define UART010_LCRL		0x10	/* Line control register, low byte. */
+#define UART010_CR		0x14	/* Control register. */
+#define UART01x_FR		0x18	/* Flag register (Read only). */
+#define UART010_IIR		0x1C	/* Interrupt indentification register (Read). */
+#define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
+#define UART01x_ILPR		0x20	/* IrDA low power counter register. */
+#define UART011_IBRD		0x24	/* Integer baud rate divisor register. */
+#define UART011_FBRD		0x28	/* Fractional baud rate divisor register. */
+#define UART011_LCRH		0x2c	/* Line control register. */
+#define UART011_CR		0x30	/* Control register. */
+#define UART011_IFLS		0x34	/* Interrupt fifo level select. */
+#define UART011_IMSC		0x38	/* Interrupt mask. */
+#define UART011_RIS		0x3c	/* Raw interrupt status. */
+#define UART011_MIS		0x40	/* Masked interrupt status. */
+#define UART011_ICR		0x44	/* Interrupt clear register. */
+#define UART011_DMACR		0x48	/* DMA control register. */
+
+#define UART01x_RSR_OE 		0x08
+#define UART01x_RSR_BE 		0x04
+#define UART01x_RSR_PE 		0x02
+#define UART01x_RSR_FE 		0x01
+
+#define UART011_FR_RI		0x100
+#define UART011_FR_TXFE		0x080
+#define UART011_FR_RXFF		0x040
+#define UART01x_FR_TXFF		0x020
+#define UART01x_FR_RXFE		0x010
+#define UART01x_FR_BUSY		0x008
+#define UART01x_FR_DCD 		0x004
+#define UART01x_FR_DSR 		0x002
+#define UART01x_FR_CTS 		0x001
+#define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
+
+#define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
+#define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
+#define UART011_CR_OUT2		0x2000	/* OUT2 */
+#define UART011_CR_OUT1		0x1000	/* OUT1 */
+#define UART011_CR_RTS		0x0800	/* RTS */
+#define UART011_CR_DTR		0x0400	/* DTR */
+#define UART011_CR_RXE		0x0200	/* receive enable */
+#define UART011_CR_TXE		0x0100	/* transmit enable */
+#define UART011_CR_LBE		0x0080	/* loopback enable */
+#define UART010_CR_RTIE		0x0040
+#define UART010_CR_TIE 		0x0020
+#define UART010_CR_RIE 		0x0010
+#define UART010_CR_MSIE		0x0008
+#define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
+#define UART01x_CR_SIREN	0x0002	/* SIR enable */
+#define UART01x_CR_UARTEN	0x0001	/* UART enable */
+ 
+#define UART011_LCRH_SPS	0x80
+#define UART01x_LCRH_WLEN_8	0x60
+#define UART01x_LCRH_WLEN_7	0x40
+#define UART01x_LCRH_WLEN_6	0x20
+#define UART01x_LCRH_WLEN_5	0x00
+#define UART01x_LCRH_FEN	0x10
+#define UART01x_LCRH_STP2	0x08
+#define UART01x_LCRH_EPS	0x04
+#define UART01x_LCRH_PEN	0x02
+#define UART01x_LCRH_BRK	0x01
+
+#define UART010_IIR_RTIS	0x08
+#define UART010_IIR_TIS		0x04
+#define UART010_IIR_RIS		0x02
+#define UART010_IIR_MIS		0x01
+
+#define UART011_IFLS_RX1_8	(0 << 3)
+#define UART011_IFLS_RX2_8	(1 << 3)
+#define UART011_IFLS_RX4_8	(2 << 3)
+#define UART011_IFLS_RX6_8	(3 << 3)
+#define UART011_IFLS_RX7_8	(4 << 3)
+#define UART011_IFLS_TX1_8	(0 << 0)
+#define UART011_IFLS_TX2_8	(1 << 0)
+#define UART011_IFLS_TX4_8	(2 << 0)
+#define UART011_IFLS_TX6_8	(3 << 0)
+#define UART011_IFLS_TX7_8	(4 << 0)
+
+#define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
+#define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
+#define UART011_PEIM		(1 << 8)	/* parity error interrupt mask */
+#define UART011_FEIM		(1 << 7)	/* framing error interrupt mask */
+#define UART011_RTIM		(1 << 6)	/* receive timeout interrupt mask */
+#define UART011_TXIM		(1 << 5)	/* transmit interrupt mask */
+#define UART011_RXIM		(1 << 4)	/* receive interrupt mask */
+#define UART011_DSRMIM		(1 << 3)	/* DSR interrupt mask */
+#define UART011_DCDMIM		(1 << 2)	/* DCD interrupt mask */
+#define UART011_CTSMIM		(1 << 1)	/* CTS interrupt mask */
+#define UART011_RIMIM		(1 << 0)	/* RI interrupt mask */
+
+#define UART011_OEIS		(1 << 10)	/* overrun error interrupt status */
+#define UART011_BEIS		(1 << 9)	/* break error interrupt status */
+#define UART011_PEIS		(1 << 8)	/* parity error interrupt status */
+#define UART011_FEIS		(1 << 7)	/* framing error interrupt status */
+#define UART011_RTIS		(1 << 6)	/* receive timeout interrupt status */
+#define UART011_TXIS		(1 << 5)	/* transmit interrupt status */
+#define UART011_RXIS		(1 << 4)	/* receive interrupt status */
+#define UART011_DSRMIS		(1 << 3)	/* DSR interrupt status */
+#define UART011_DCDMIS		(1 << 2)	/* DCD interrupt status */
+#define UART011_CTSMIS		(1 << 1)	/* CTS interrupt status */
+#define UART011_RIMIS		(1 << 0)	/* RI interrupt status */
+
+#define UART011_OEIC		(1 << 10)	/* overrun error interrupt clear */
+#define UART011_BEIC		(1 << 9)	/* break error interrupt clear */
+#define UART011_PEIC		(1 << 8)	/* parity error interrupt clear */
+#define UART011_FEIC		(1 << 7)	/* framing error interrupt clear */
+#define UART011_RTIC		(1 << 6)	/* receive timeout interrupt clear */
+#define UART011_TXIC		(1 << 5)	/* transmit interrupt clear */
+#define UART011_RXIC		(1 << 4)	/* receive interrupt clear */
+#define UART011_DSRMIC		(1 << 3)	/* DSR interrupt clear */
+#define UART011_DCDMIC		(1 << 2)	/* DCD interrupt clear */
+#define UART011_CTSMIC		(1 << 1)	/* CTS interrupt clear */
+#define UART011_RIMIC		(1 << 0)	/* RI interrupt clear */
+
+#define UART011_DMAONERR	(1 << 2)	/* disable dma on error */
+#define UART011_TXDMAE		(1 << 1)	/* enable transmit dma */
+#define UART011_RXDMAE		(1 << 0)	/* enable receive dma */
+
+#define UART01x_RSR_ANY		(UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
+#define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
+
+#endif
diff --git a/include/asm-arm/hardware/clock.h b/include/asm-arm/hardware/clock.h
new file mode 100644
index 000000000000..4983449ff2c7
--- /dev/null
+++ b/include/asm-arm/hardware/clock.h
@@ -0,0 +1,121 @@
+/*
+ *  linux/include/asm-arm/hardware/clock.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_CLOCK_H
+#define ASMARM_CLOCK_H
+
+struct device;
+
+/*
+ * The base API.
+ */
+
+
+/*
+ * struct clk - an machine class defined object / cookie.
+ */
+struct clk;
+
+/**
+ * clk_get - lookup and obtain a reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: device ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.
+ */
+struct clk *clk_get(struct device *dev, const char *id);
+
+/**
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk);
+
+/**
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ */
+void clk_disable(struct clk *clk);
+
+/**
+ * clk_use - increment the use count
+ * @clk: clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_use(struct clk *clk);
+
+/**
+ * clk_unuse - decrement the use count
+ * @clk: clock source
+ */
+void clk_unuse(struct clk *clk);
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *		  This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk);
+
+/**
+ * clk_put	- "free" the clock source
+ * @clk: clock source
+ */
+void clk_put(struct clk *clk);
+
+
+/*
+ * The remaining APIs are optional for machine class support.
+ */
+
+
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate);
+ 
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate);
+ 
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent);
+
+/**
+ * clk_get_parent - get the parent clock source for this clock
+ * @clk: clock source
+ *
+ * Returns struct clk corresponding to parent clock source, or
+ * valid IS_ERR() condition containing errno.
+ */
+struct clk *clk_get_parent(struct clk *clk);
+
+#endif
diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h
new file mode 100644
index 000000000000..8d3228dc1778
--- /dev/null
+++ b/include/asm-arm/hardware/clps7111.h
@@ -0,0 +1,184 @@
+/*
+ *  linux/include/asm-arm/hardware/clps7111.h
+ *
+ *  This file contains the hardware definitions of the CLPS7111 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CLPS7111_H
+#define __ASM_HARDWARE_CLPS7111_H
+
+#define CLPS7111_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
+#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
+#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
+#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
+#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
+#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
+#endif
+
+#define PADR		(0x0000)
+#define PBDR		(0x0001)
+#define PDDR		(0x0003)
+#define PADDR		(0x0040)
+#define PBDDR		(0x0041)
+#define PDDDR		(0x0043)
+#define PEDR		(0x0080)
+#define PEDDR		(0x00c0)
+#define SYSCON1		(0x0100)
+#define SYSFLG1		(0x0140)
+#define MEMCFG1		(0x0180)
+#define MEMCFG2		(0x01c0)
+#define DRFPR		(0x0200)
+#define INTSR1		(0x0240)
+#define INTMR1		(0x0280)
+#define LCDCON		(0x02c0)
+#define TC1D            (0x0300)
+#define TC2D		(0x0340)
+#define RTCDR		(0x0380)
+#define RTCMR		(0x03c0)
+#define PMPCON		(0x0400)
+#define CODR		(0x0440)
+#define UARTDR1		(0x0480)
+#define UBRLCR1		(0x04c0)
+#define SYNCIO		(0x0500)
+#define PALLSW		(0x0540)
+#define PALMSW		(0x0580)
+#define STFCLR		(0x05c0)
+#define BLEOI		(0x0600)
+#define MCEOI		(0x0640)
+#define TEOI		(0x0680)
+#define TC1EOI		(0x06c0)
+#define TC2EOI		(0x0700)
+#define RTCEOI		(0x0740)
+#define UMSEOI		(0x0780)
+#define COEOI		(0x07c0)
+#define HALT		(0x0800)
+#define STDBY		(0x0840)
+
+#define FBADDR		(0x1000)
+#define SYSCON2		(0x1100)
+#define SYSFLG2		(0x1140)
+#define INTSR2		(0x1240)
+#define INTMR2		(0x1280)
+#define UARTDR2		(0x1480)
+#define UBRLCR2		(0x14c0)
+#define SS2DR		(0x1500)
+#define SRXEOF		(0x1600)
+#define SS2POP		(0x16c0)
+#define KBDEOI		(0x1700)
+
+/* common bits: SYSCON1 / SYSCON2 */
+#define SYSCON_UARTEN		(1 << 8)
+
+#define SYSCON1_KBDSCAN(x)	((x) & 15)
+#define SYSCON1_KBDSCANMASK	(15)
+#define SYSCON1_TC1M		(1 << 4)
+#define SYSCON1_TC1S		(1 << 5)
+#define SYSCON1_TC2M		(1 << 6)
+#define SYSCON1_TC2S		(1 << 7)
+#define SYSCON1_UART1EN		SYSCON_UARTEN
+#define SYSCON1_BZTOG		(1 << 9)
+#define SYSCON1_BZMOD		(1 << 10)
+#define SYSCON1_DBGEN		(1 << 11)
+#define SYSCON1_LCDEN		(1 << 12)
+#define SYSCON1_CDENTX		(1 << 13)
+#define SYSCON1_CDENRX		(1 << 14)
+#define SYSCON1_SIREN		(1 << 15)
+#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK	(3 << 16)
+#define SYSCON1_EXCKEN		(1 << 18)
+#define SYSCON1_WAKEDIS		(1 << 19)
+#define SYSCON1_IRTXM		(1 << 20)
+
+/* common bits: SYSFLG1 / SYSFLG2 */
+#define SYSFLG_UBUSY		(1 << 11)
+#define SYSFLG_URXFE		(1 << 22)
+#define SYSFLG_UTXFF		(1 << 23)
+
+#define SYSFLG1_MCDR		(1 << 0)
+#define SYSFLG1_DCDET		(1 << 1)
+#define SYSFLG1_WUDR		(1 << 2)
+#define SYSFLG1_WUON		(1 << 3)
+#define SYSFLG1_CTS		(1 << 8)
+#define SYSFLG1_DSR		(1 << 9)
+#define SYSFLG1_DCD		(1 << 10)
+#define SYSFLG1_UBUSY		SYSFLG_UBUSY
+#define SYSFLG1_NBFLG		(1 << 12)
+#define SYSFLG1_RSTFLG		(1 << 13)
+#define SYSFLG1_PFFLG		(1 << 14)
+#define SYSFLG1_CLDFLG		(1 << 15)
+#define SYSFLG1_URXFE		SYSFLG_URXFE
+#define SYSFLG1_UTXFF		SYSFLG_UTXFF
+#define SYSFLG1_CRXFE		(1 << 24)
+#define SYSFLG1_CTXFF		(1 << 25)
+#define SYSFLG1_SSIBUSY		(1 << 26)
+#define SYSFLG1_ID		(1 << 29)
+
+#define SYSFLG2_SSRXOF		(1 << 0)
+#define SYSFLG2_RESVAL		(1 << 1)
+#define SYSFLG2_RESFRM		(1 << 2)
+#define SYSFLG2_SS2RXFE		(1 << 3)
+#define SYSFLG2_SS2TXFF		(1 << 4)
+#define SYSFLG2_SS2TXUF		(1 << 5)
+#define SYSFLG2_CKMODE		(1 << 6)
+#define SYSFLG2_UBUSY		SYSFLG_UBUSY
+#define SYSFLG2_URXFE		SYSFLG_URXFE
+#define SYSFLG2_UTXFF		SYSFLG_UTXFF
+
+#define LCDCON_GSEN		(1 << 30)
+#define LCDCON_GSMD		(1 << 31)
+
+#define SYSCON2_SERSEL		(1 << 0)
+#define SYSCON2_KBD6		(1 << 1)
+#define SYSCON2_DRAMZ		(1 << 2)
+#define SYSCON2_KBWEN		(1 << 3)
+#define SYSCON2_SS2TXEN		(1 << 4)
+#define SYSCON2_PCCARD1		(1 << 5)
+#define SYSCON2_PCCARD2		(1 << 6)
+#define SYSCON2_SS2RXEN		(1 << 7)
+#define SYSCON2_UART2EN		SYSCON_UARTEN
+#define SYSCON2_SS2MAEN		(1 << 9)
+#define SYSCON2_OSTB		(1 << 12)
+#define SYSCON2_CLKENSL		(1 << 13)
+#define SYSCON2_BUZFREQ		(1 << 14)
+
+/* common bits: UARTDR1 / UARTDR2 */
+#define UARTDR_FRMERR		(1 << 8)
+#define UARTDR_PARERR		(1 << 9)
+#define UARTDR_OVERR		(1 << 10)
+
+/* common bits: UBRLCR1 / UBRLCR2 */
+#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
+#define UBRLCR_BREAK		(1 << 12)
+#define UBRLCR_PRTEN		(1 << 13)
+#define UBRLCR_EVENPRT		(1 << 14)
+#define UBRLCR_XSTOP		(1 << 15)
+#define UBRLCR_FIFOEN		(1 << 16)
+#define UBRLCR_WRDLEN5		(0 << 17)
+#define UBRLCR_WRDLEN6		(1 << 17)
+#define UBRLCR_WRDLEN7		(2 << 17)
+#define UBRLCR_WRDLEN8		(3 << 17)
+#define UBRLCR_WRDLEN_MASK	(3 << 17)
+
+#define SYNCIO_SMCKEN		(1 << 13)
+#define SYNCIO_TXFRMEN		(1 << 14)
+
+#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h
new file mode 100644
index 000000000000..ad99a3e1b802
--- /dev/null
+++ b/include/asm-arm/hardware/cs89712.h
@@ -0,0 +1,49 @@
+/*
+ *  linux/include/asm-arm/hardware/cs89712.h
+ *
+ *  This file contains the hardware definitions of the CS89712
+ *  additional internal registers.
+ *
+ *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
+ *			
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CS89712_H
+#define __ASM_HARDWARE_CS89712_H
+
+/*
+*	CS89712 additional registers
+*/
+                                  
+#define PCDR			0x0002	/* Port C Data register ---------------------------- */
+#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
+#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
+#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
+#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h
new file mode 100644
index 000000000000..9049f0ddaecf
--- /dev/null
+++ b/include/asm-arm/hardware/dec21285.h
@@ -0,0 +1,148 @@
+/*
+ *  linux/include/asm-arm/hardware/dec21285.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  DC21285 registers
+ */
+#define DC21285_PCI_IACK		0x79000000
+#define DC21285_ARMCSR_BASE		0x42000000
+#define DC21285_PCI_TYPE_0_CONFIG	0x7b000000
+#define DC21285_PCI_TYPE_1_CONFIG	0x7a000000
+#define DC21285_OUTBOUND_WRITE_FLUSH	0x78000000
+#define DC21285_FLASH			0x41000000
+#define DC21285_PCI_IO			0x7c000000
+#define DC21285_PCI_MEM			0x80000000
+
+#include <linux/config.h>
+#ifndef __ASSEMBLY__
+#include <asm/arch/hardware.h>
+#define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
+#else
+#define DC21285_IO(x)		(x)
+#endif
+
+#define CSR_PCICMD		DC21285_IO(0x0004)
+#define CSR_CLASSREV		DC21285_IO(0x0008)
+#define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
+#define CSR_PCICSRBASE		DC21285_IO(0x0010)
+#define CSR_PCICSRIOBASE	DC21285_IO(0x0014)
+#define CSR_PCISDRAMBASE	DC21285_IO(0x0018)
+#define CSR_PCIROMBASE		DC21285_IO(0x0030)
+#define CSR_MBOX0		DC21285_IO(0x0050)
+#define CSR_MBOX1		DC21285_IO(0x0054)
+#define CSR_MBOX2		DC21285_IO(0x0058)
+#define CSR_MBOX3		DC21285_IO(0x005c)
+#define CSR_DOORBELL		DC21285_IO(0x0060)
+#define CSR_DOORBELL_SETUP	DC21285_IO(0x0064)
+#define CSR_ROMWRITEREG		DC21285_IO(0x0068)
+#define CSR_CSRBASEMASK		DC21285_IO(0x00f8)
+#define CSR_CSRBASEOFFSET	DC21285_IO(0x00fc)
+#define CSR_SDRAMBASEMASK	DC21285_IO(0x0100)
+#define CSR_SDRAMBASEOFFSET	DC21285_IO(0x0104)
+#define CSR_ROMBASEMASK		DC21285_IO(0x0108)
+#define CSR_SDRAMTIMING		DC21285_IO(0x010c)
+#define CSR_SDRAMADDRSIZE0	DC21285_IO(0x0110)
+#define CSR_SDRAMADDRSIZE1	DC21285_IO(0x0114)
+#define CSR_SDRAMADDRSIZE2	DC21285_IO(0x0118)
+#define CSR_SDRAMADDRSIZE3	DC21285_IO(0x011c)
+#define CSR_I2O_INFREEHEAD	DC21285_IO(0x0120)
+#define CSR_I2O_INPOSTTAIL	DC21285_IO(0x0124)
+#define CSR_I2O_OUTPOSTHEAD	DC21285_IO(0x0128)
+#define CSR_I2O_OUTFREETAIL	DC21285_IO(0x012c)
+#define CSR_I2O_INFREECOUNT	DC21285_IO(0x0130)
+#define CSR_I2O_OUTPOSTCOUNT	DC21285_IO(0x0134)
+#define CSR_I2O_INPOSTCOUNT	DC21285_IO(0x0138)
+#define CSR_SA110_CNTL		DC21285_IO(0x013c)
+#define SA110_CNTL_INITCMPLETE		(1 << 0)
+#define SA110_CNTL_ASSERTSERR		(1 << 1)
+#define SA110_CNTL_RXSERR		(1 << 3)
+#define SA110_CNTL_SA110DRAMPARITY	(1 << 4)
+#define SA110_CNTL_PCISDRAMPARITY	(1 << 5)
+#define SA110_CNTL_DMASDRAMPARITY	(1 << 6)
+#define SA110_CNTL_DISCARDTIMER		(1 << 8)
+#define SA110_CNTL_PCINRESET		(1 << 9)
+#define SA110_CNTL_I2O_256		(0 << 10)
+#define SA110_CNTL_I20_512		(1 << 10)
+#define SA110_CNTL_I2O_1024		(2 << 10)
+#define SA110_CNTL_I2O_2048		(3 << 10)
+#define SA110_CNTL_I2O_4096		(4 << 10)
+#define SA110_CNTL_I2O_8192		(5 << 10)
+#define SA110_CNTL_I2O_16384		(6 << 10)
+#define SA110_CNTL_I2O_32768		(7 << 10)
+#define SA110_CNTL_WATCHDOG		(1 << 13)
+#define SA110_CNTL_ROMWIDTH_UNDEF	(0 << 14)
+#define SA110_CNTL_ROMWIDTH_16		(1 << 14)
+#define SA110_CNTL_ROMWIDTH_32		(2 << 14)
+#define SA110_CNTL_ROMWIDTH_8		(3 << 14)
+#define SA110_CNTL_ROMACCESSTIME(x)	((x)<<16)
+#define SA110_CNTL_ROMBURSTTIME(x)	((x)<<20)
+#define SA110_CNTL_ROMTRISTATETIME(x)	((x)<<24)
+#define SA110_CNTL_XCSDIR(x)		((x)<<28)
+#define SA110_CNTL_PCICFN		(1 << 31)
+
+/*
+ * footbridge_cfn_mode() is used when we want
+ * to check whether we are the central function
+ */
+#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
+#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
+#define footbridge_cfn_mode() __footbridge_cfn_mode()
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+#define footbridge_cfn_mode() (1)
+#else
+#define footbridge_cfn_mode() (0)
+#endif
+
+#define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
+#define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
+#define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
+#define CSR_XBUS_IOSTROBE	DC21285_IO(0x014c)
+#define CSR_DOORBELL_PCI	DC21285_IO(0x0150)
+#define CSR_DOORBELL_SA110	DC21285_IO(0x0154)
+#define CSR_UARTDR		DC21285_IO(0x0160)
+#define CSR_RXSTAT		DC21285_IO(0x0164)
+#define CSR_H_UBRLCR		DC21285_IO(0x0168)
+#define CSR_M_UBRLCR		DC21285_IO(0x016c)
+#define CSR_L_UBRLCR		DC21285_IO(0x0170)
+#define CSR_UARTCON		DC21285_IO(0x0174)
+#define CSR_UARTFLG		DC21285_IO(0x0178)
+#define CSR_IRQ_STATUS		DC21285_IO(0x0180)
+#define CSR_IRQ_RAWSTATUS	DC21285_IO(0x0184)
+#define CSR_IRQ_ENABLE		DC21285_IO(0x0188)
+#define CSR_IRQ_DISABLE		DC21285_IO(0x018c)
+#define CSR_IRQ_SOFT		DC21285_IO(0x0190)
+#define CSR_FIQ_STATUS		DC21285_IO(0x0280)
+#define CSR_FIQ_RAWSTATUS	DC21285_IO(0x0284)
+#define CSR_FIQ_ENABLE		DC21285_IO(0x0288)
+#define CSR_FIQ_DISABLE		DC21285_IO(0x028c)
+#define CSR_FIQ_SOFT		DC21285_IO(0x0290)
+#define CSR_TIMER1_LOAD		DC21285_IO(0x0300)
+#define CSR_TIMER1_VALUE	DC21285_IO(0x0304)
+#define CSR_TIMER1_CNTL		DC21285_IO(0x0308)
+#define CSR_TIMER1_CLR		DC21285_IO(0x030c)
+#define CSR_TIMER2_LOAD		DC21285_IO(0x0320)
+#define CSR_TIMER2_VALUE	DC21285_IO(0x0324)
+#define CSR_TIMER2_CNTL		DC21285_IO(0x0328)
+#define CSR_TIMER2_CLR		DC21285_IO(0x032c)
+#define CSR_TIMER3_LOAD		DC21285_IO(0x0340)
+#define CSR_TIMER3_VALUE	DC21285_IO(0x0344)
+#define CSR_TIMER3_CNTL		DC21285_IO(0x0348)
+#define CSR_TIMER3_CLR		DC21285_IO(0x034c)
+#define CSR_TIMER4_LOAD		DC21285_IO(0x0360)
+#define CSR_TIMER4_VALUE	DC21285_IO(0x0364)
+#define CSR_TIMER4_CNTL		DC21285_IO(0x0368)
+#define CSR_TIMER4_CLR		DC21285_IO(0x036c)
+
+#define TIMER_CNTL_ENABLE	(1 << 7)
+#define TIMER_CNTL_AUTORELOAD	(1 << 6)
+#define TIMER_CNTL_DIV1		(0)
+#define TIMER_CNTL_DIV16	(1 << 2)
+#define TIMER_CNTL_DIV256	(2 << 2)
+#define TIMER_CNTL_CNTEXT	(3 << 2)
+
+
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S
new file mode 100644
index 000000000000..30c7b92c2416
--- /dev/null
+++ b/include/asm-arm/hardware/entry-macro-iomd.S
@@ -0,0 +1,145 @@
+/*
+ * arch/arm/commond/entry-macro-iomd.S
+ *
+ * Low-level IRQ helper macros for IOC/IOMD based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/* IOC / IOMD based hardware */
+#include <asm/hardware/iomd.h>
+
+		.equ	ioc_base_high, IOC_BASE & 0xff000000
+		.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+		.macro	disable_fiq
+		mov	r12, #ioc_base_high
+		.if	ioc_base_low
+		orr	r12, r12, #ioc_base_low
+		.endif
+		strb	r12, [r12, #0x38]	@ Disable FIQ register
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #ioc_base_high		@ point at IOC
+		.if	ioc_base_low
+		orr	r4, r4, #ioc_base_low
+		.endif
+		ldrb	\irqstat, [r4, #IOMD_IRQREQB]	@ get high priority first
+		ldr	\base, =irq_prio_h
+		teq	\irqstat, #0
+#ifdef IOMD_BASE
+		ldreqb	\irqstat, [r4, #IOMD_DMAREQ]	@ get dma
+		addeq	\base, \base, #256		@ irq_prio_h table size
+		teqeq	\irqstat, #0
+		bne	2406f
+#endif
+		ldreqb	\irqstat, [r4, #IOMD_IRQREQA]	@ get low priority
+		addeq	\base, \base, #256		@ irq_prio_d table size
+		teqeq	\irqstat, #0
+#ifdef IOMD_IRQREQC
+		ldreqb	\irqstat, [r4, #IOMD_IRQREQC]
+		addeq	\base, \base, #256		@ irq_prio_l table size
+		teqeq	\irqstat, #0
+#endif
+#ifdef IOMD_IRQREQD
+		ldreqb	\irqstat, [r4, #IOMD_IRQREQD]
+		addeq	\base, \base, #256		@ irq_prio_lc table size
+		teqeq	\irqstat, #0
+#endif
+2406:		ldrneb	\irqnr, [\base, \irqstat]	@ get IRQ number
+		.endm
+
+/*
+ * Interrupt table (incorporates priority).  Please note that we
+ * rely on the order of these tables (see above code).
+ */
+		.align	5
+irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+#ifdef IOMD_BASE
+irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+#endif
+irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+#ifdef IOMD_IRQREQC
+irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+#endif
+#ifdef IOMD_IRQREQD
+irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+#endif
+
diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h
new file mode 100644
index 000000000000..017aa68f612d
--- /dev/null
+++ b/include/asm-arm/hardware/ep7211.h
@@ -0,0 +1,40 @@
+/*
+ *  linux/include/asm-arm/hardware/ep7211.h
+ *
+ *  This file contains the hardware definitions of the EP7211 internal
+ *  registers.
+ *
+ *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7211_H
+#define __ASM_HARDWARE_EP7211_H
+
+#include <asm/hardware/clps7111.h>
+
+/*
+ * define EP7211_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7211_PHYS_BASE	(0x80000000)
+
+/*
+ * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
+ * present in 7212) here.
+ */
+
+#endif /* __ASM_HARDWARE_EP7211_H */
diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h
new file mode 100644
index 000000000000..0e952e747073
--- /dev/null
+++ b/include/asm-arm/hardware/ep7212.h
@@ -0,0 +1,83 @@
+/*
+ *  linux/include/asm-arm/hardware/ep7212.h
+ *
+ *  This file contains the hardware definitions of the EP7212 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7212_H
+#define __ASM_HARDWARE_EP7212_H
+
+/*
+ * define EP7212_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7212_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
+#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
+#endif
+
+/*
+ * These registers are specific to the EP7212 only
+ */
+#define DAIR			0x2000
+#define DAIR0			0x2040
+#define DAIDR1			0x2080
+#define DAIDR2			0x20c0
+#define DAISR			0x2100
+#define SYSCON3			0x2200
+#define INTSR3			0x2240
+#define INTMR3			0x2280
+#define LEDFLSH			0x22c0
+
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+
+#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h
new file mode 100644
index 000000000000..ff8618a441c0
--- /dev/null
+++ b/include/asm-arm/hardware/icst307.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/hardware/icst307.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICS307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This file is similar to the icst525.h file
+ */
+#ifndef ASMARM_HARDWARE_ICST307_H
+#define ASMARM_HARDWARE_ICST307_H
+
+struct icst307_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst307_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
+struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
+struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
+
+#endif
diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h
new file mode 100644
index 000000000000..edd5a5704406
--- /dev/null
+++ b/include/asm-arm/hardware/icst525.h
@@ -0,0 +1,36 @@
+/*
+ *  linux/include/asm-arm/hardware/icst525.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST525
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST525_H
+#define ASMARM_HARDWARE_ICST525_H
+
+struct icst525_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst525_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
+struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
+struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
+
+#endif
diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h
new file mode 100644
index 000000000000..b3b46ef65943
--- /dev/null
+++ b/include/asm-arm/hardware/ioc.h
@@ -0,0 +1,72 @@
+/*
+ *  linux/include/asm-arm/hardware/ioc.h
+ *
+ *  Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Use these macros to read/write the IOC.  All it does is perform the actual
+ *  read/write.
+ */
+#ifndef __ASMARM_HARDWARE_IOC_H
+#define __ASMARM_HARDWARE_IOC_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
+#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
+
+#endif
+
+#define IOC_CONTROL	(0x00)
+#define IOC_KARTTX	(0x04)
+#define IOC_KARTRX	(0x04)
+
+#define IOC_IRQSTATA	(0x10)
+#define IOC_IRQREQA	(0x14)
+#define IOC_IRQCLRA	(0x14)
+#define IOC_IRQMASKA	(0x18)
+
+#define IOC_IRQSTATB	(0x20)
+#define IOC_IRQREQB	(0x24)
+#define IOC_IRQMASKB	(0x28)
+
+#define IOC_FIQSTAT	(0x30)
+#define IOC_FIQREQ	(0x34)
+#define IOC_FIQMASK	(0x38)
+
+#define IOC_T0CNTL	(0x40)
+#define IOC_T0LTCHL	(0x40)
+#define IOC_T0CNTH	(0x44)
+#define IOC_T0LTCHH	(0x44)
+#define IOC_T0GO	(0x48)
+#define IOC_T0LATCH	(0x4c)
+
+#define IOC_T1CNTL	(0x50)
+#define IOC_T1LTCHL	(0x50)
+#define IOC_T1CNTH	(0x54)
+#define IOC_T1LTCHH	(0x54)
+#define IOC_T1GO	(0x58)
+#define IOC_T1LATCH	(0x5c)
+
+#define IOC_T2CNTL	(0x60)
+#define IOC_T2LTCHL	(0x60)
+#define IOC_T2CNTH	(0x64)
+#define IOC_T2LTCHH	(0x64)
+#define IOC_T2GO	(0x68)
+#define IOC_T2LATCH	(0x6c)
+
+#define IOC_T3CNTL	(0x70)
+#define IOC_T3LTCHL	(0x70)
+#define IOC_T3CNTH	(0x74)
+#define IOC_T3LTCHH	(0x74)
+#define IOC_T3GO	(0x78)
+#define IOC_T3LATCH	(0x7c)
+
+#endif
diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h
new file mode 100644
index 000000000000..82fa2c279a18
--- /dev/null
+++ b/include/asm-arm/hardware/iomd.h
@@ -0,0 +1,227 @@
+/*
+ *  linux/include/asm-arm/hardware/iomd.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains information out the IOMD ASIC used in the
+ *  Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
+ */
+#ifndef __ASMARM_HARDWARE_IOMD_H
+#define __ASMARM_HARDWARE_IOMD_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define iomd_readb(off)		__raw_readb(IOMD_BASE + (off))
+#define iomd_readl(off)		__raw_readl(IOMD_BASE + (off))
+#define iomd_writeb(val,off)	__raw_writeb(val, IOMD_BASE + (off))
+#define iomd_writel(val,off)	__raw_writel(val, IOMD_BASE + (off))
+
+#endif
+
+#define IOMD_CONTROL	(0x000)
+#define IOMD_KARTTX	(0x004)
+#define IOMD_KARTRX	(0x004)
+#define IOMD_KCTRL	(0x008)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IOLINES	(0x00C)
+#endif
+
+#define IOMD_IRQSTATA	(0x010)
+#define IOMD_IRQREQA	(0x014)
+#define IOMD_IRQCLRA	(0x014)
+#define IOMD_IRQMASKA	(0x018)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_SUSMODE	(0x01C)
+#endif
+
+#define IOMD_IRQSTATB	(0x020)
+#define IOMD_IRQREQB	(0x024)
+#define IOMD_IRQMASKB	(0x028)
+
+#define IOMD_FIQSTAT	(0x030)
+#define IOMD_FIQREQ	(0x034)
+#define IOMD_FIQMASK	(0x038)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_CLKCTL	(0x03C)
+#endif
+
+#define IOMD_T0CNTL	(0x040)
+#define IOMD_T0LTCHL	(0x040)
+#define IOMD_T0CNTH	(0x044)
+#define IOMD_T0LTCHH	(0x044)
+#define IOMD_T0GO	(0x048)
+#define IOMD_T0LATCH	(0x04c)
+
+#define IOMD_T1CNTL	(0x050)
+#define IOMD_T1LTCHL	(0x050)
+#define IOMD_T1CNTH	(0x054)
+#define IOMD_T1LTCHH	(0x054)
+#define IOMD_T1GO	(0x058)
+#define IOMD_T1LATCH	(0x05c)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IRQSTATC	(0x060)
+#define IOMD_IRQREQC	(0x064)
+#define IOMD_IRQMASKC	(0x068)
+
+#define IOMD_VIDMUX	(0x06c)
+
+#define IOMD_IRQSTATD	(0x070)
+#define IOMD_IRQREQD	(0x074)
+#define IOMD_IRQMASKD	(0x078)
+#endif
+
+#define IOMD_ROMCR0	(0x080)
+#define IOMD_ROMCR1	(0x084)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DRAMCR	(0x088)
+#endif
+#define IOMD_REFCR	(0x08C)
+
+#define IOMD_FSIZE	(0x090)
+#define IOMD_ID0	(0x094)
+#define IOMD_ID1	(0x098)
+#define IOMD_VERSION	(0x09C)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_MOUSEX	(0x0A0)
+#define IOMD_MOUSEY	(0x0A4)
+#endif
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_MSEDAT	(0x0A8)
+#define IOMD_MSECTL	(0x0Ac)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMATCR	(0x0C0)
+#endif
+#define IOMD_IOTCR	(0x0C4)
+#define IOMD_ECTCR	(0x0C8)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMAEXT	(0x0CC)
+#endif
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_ASTCR	(0x0CC)
+#define IOMD_DRAMCR	(0x0D0)
+#define IOMD_SELFREF	(0x0D4)
+#define IOMD_ATODICR	(0x0E0)
+#define IOMD_ATODSR	(0x0E4)
+#define IOMD_ATODCC	(0x0E8)
+#define IOMD_ATODCNT1	(0x0EC)
+#define IOMD_ATODCNT2	(0x0F0)
+#define IOMD_ATODCNT3	(0x0F4)
+#define IOMD_ATODCNT4	(0x0F8)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define DMA_EXT_IO0	1
+#define DMA_EXT_IO1	2
+#define DMA_EXT_IO2	4
+#define DMA_EXT_IO3	8
+
+#define IOMD_IO0CURA	(0x100)
+#define IOMD_IO0ENDA	(0x104)
+#define IOMD_IO0CURB	(0x108)
+#define IOMD_IO0ENDB	(0x10C)
+#define IOMD_IO0CR	(0x110)
+#define IOMD_IO0ST	(0x114)
+
+#define IOMD_IO1CURA	(0x120)
+#define IOMD_IO1ENDA	(0x124)
+#define IOMD_IO1CURB	(0x128)
+#define IOMD_IO1ENDB	(0x12C)
+#define IOMD_IO1CR	(0x130)
+#define IOMD_IO1ST	(0x134)
+
+#define IOMD_IO2CURA	(0x140)
+#define IOMD_IO2ENDA	(0x144)
+#define IOMD_IO2CURB	(0x148)
+#define IOMD_IO2ENDB	(0x14C)
+#define IOMD_IO2CR	(0x150)
+#define IOMD_IO2ST	(0x154)
+
+#define IOMD_IO3CURA	(0x160)
+#define IOMD_IO3ENDA	(0x164)
+#define IOMD_IO3CURB	(0x168)
+#define IOMD_IO3ENDB	(0x16C)
+#define IOMD_IO3CR	(0x170)
+#define IOMD_IO3ST	(0x174)
+#endif
+
+#define IOMD_SD0CURA	(0x180)
+#define IOMD_SD0ENDA	(0x184)
+#define IOMD_SD0CURB	(0x188)
+#define IOMD_SD0ENDB	(0x18C)
+#define IOMD_SD0CR	(0x190)
+#define IOMD_SD0ST	(0x194)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_SD1CURA	(0x1A0)
+#define IOMD_SD1ENDA	(0x1A4)
+#define IOMD_SD1CURB	(0x1A8)
+#define IOMD_SD1ENDB	(0x1AC)
+#define IOMD_SD1CR	(0x1B0)
+#define IOMD_SD1ST	(0x1B4)
+#endif
+
+#define IOMD_CURSCUR	(0x1C0)
+#define IOMD_CURSINIT	(0x1C4)
+
+#define IOMD_VIDCUR	(0x1D0)
+#define IOMD_VIDEND	(0x1D4)
+#define IOMD_VIDSTART	(0x1D8)
+#define IOMD_VIDINIT	(0x1DC)
+#define IOMD_VIDCR	(0x1E0)
+
+#define IOMD_DMASTAT	(0x1F0)
+#define IOMD_DMAREQ	(0x1F4)
+#define IOMD_DMAMASK	(0x1F8)
+
+#define DMA_END_S	(1 << 31)
+#define DMA_END_L	(1 << 30)
+
+#define DMA_CR_C	0x80
+#define DMA_CR_D	0x40
+#define DMA_CR_E	0x20
+
+#define DMA_ST_OFL	4
+#define DMA_ST_INT	2
+#define DMA_ST_AB	1
+
+/*
+ * DMA (MEMC) compatibility
+ */
+#define HALF_SAM	vram_half_sam
+#define VDMA_ALIGNMENT	(HALF_SAM * 2)
+#define VDMA_XFERSIZE	(HALF_SAM)
+#define VDMA_INIT	IOMD_VIDINIT
+#define VDMA_START	IOMD_VIDSTART
+#define VDMA_END	IOMD_VIDEND
+
+#ifndef __ASSEMBLY__
+extern unsigned int vram_half_sam;
+#define video_set_dma(start,end,offset)				\
+do {								\
+	outl (SCREEN_START + start, VDMA_START);		\
+	outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END);	\
+	if (offset >= end - VDMA_XFERSIZE)			\
+		offset |= 0x40000000;				\
+	outl (SCREEN_START + offset, VDMA_INIT);		\
+} while (0)
+#endif
+
+#endif
diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h
new file mode 100644
index 000000000000..7ec91168a576
--- /dev/null
+++ b/include/asm-arm/hardware/linkup-l1110.h
@@ -0,0 +1,48 @@
+/*
+*
+* Definitions for H3600 Handheld Computer
+*
+* Copyright 2001 Compaq Computer Corporation.
+*
+* Use consistent with the GNU GPL is permitted,
+* provided that this copyright notice is
+* preserved in its entirety in all copies and derived works.
+*
+* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+* FITNESS FOR ANY PARTICULAR PURPOSE.
+*
+* Author: Jamey Hicks.
+*
+*/
+
+/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
+
+/* PC Card Status Register */
+#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
+#define LINKUP_PRS_S2	(1 << 1)
+#define LINKUP_PRS_S3	(1 << 2)
+#define LINKUP_PRS_S4	(1 << 3)
+#define LINKUP_PRS_BVD1	(1 << 4)
+#define LINKUP_PRS_BVD2	(1 << 5)
+#define LINKUP_PRS_VS1	(1 << 6)
+#define LINKUP_PRS_VS2	(1 << 7)
+#define LINKUP_PRS_RDY	(1 << 8)
+#define LINKUP_PRS_CD1	(1 << 9)
+#define LINKUP_PRS_CD2	(1 << 10)
+
+/* PC Card Command Register */
+#define LINKUP_PRC_S1	(1 << 0)
+#define LINKUP_PRC_S2	(1 << 1)
+#define LINKUP_PRC_S3	(1 << 2)
+#define LINKUP_PRC_S4	(1 << 3)
+#define LINKUP_PRC_RESET (1 << 4)
+#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
+#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
+#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
+#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
+#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
+
+struct linkup_l1110 {
+	volatile short prc;
+};
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
new file mode 100644
index 000000000000..5f10048ec54e
--- /dev/null
+++ b/include/asm-arm/hardware/locomo.h
@@ -0,0 +1,206 @@
+/*
+ * linux/include/asm-arm/hardware/locomo.h
+ *
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
+#define locomo_readl(addr)	(*(volatile u16 *)(addr))
+
+/* LOCOMO version */
+#define LOCOMO_VER	0x00
+
+/* Pin status */
+#define LOCOMO_ST	0x04
+
+/* Pin status */
+#define LOCOMO_C32K	0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR	0x0C
+
+/* MCS decoder for boot selecting */
+#define LOCOMO_MCSX0	0x10
+#define LOCOMO_MCSX1	0x14
+#define LOCOMO_MCSX2	0x18
+#define LOCOMO_MCSX3	0x1c
+
+/* Touch panel controller */
+#define LOCOMO_ASD	0x20		/* AD start delay */
+#define LOCOMO_HSD	0x28		/* HSYS delay */
+#define LOCOMO_HSC	0x2c		/* HSYS period */
+#define LOCOMO_TADC	0x30		/* tablet ADC clock */
+
+
+/* Long time timer */
+#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
+#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC		0xe0
+/* DAC control */
+#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
+#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
+#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
+#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
+
+/* SPI interface */
+#define LOCOMO_SPIMD	0x60		/* SPI mode setting */
+#define LOCOMO_SPICT	0x64		/* SPI mode control */
+#define LOCOMO_SPIST	0x68		/* SPI status */
+#define LOCOMO_SPIIS	0x70		/* SPI interrupt status */
+#define LOCOMO_SPIWE	0x74		/* SPI interrupt status write enable */
+#define LOCOMO_SPIIE	0x78		/* SPI interrupt enable */
+#define LOCOMO_SPIIR	0x7c		/* SPI interrupt request */
+#define LOCOMO_SPITD	0x80		/* SPI transfer data write */
+#define LOCOMO_SPIRD	0x84		/* SPI receive data read */
+#define LOCOMO_SPITS	0x88		/* SPI transfer data shift */
+#define LOCOMO_SPIRS	0x8C		/* SPI receive data shift */
+#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
+#define	LOCOMO_SPI_OVRN	(1 << 2)	/* Over Run bit */
+#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
+#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
+
+/* GPIO */
+#define LOCOMO_GPD		0x90	/* GPIO direction */
+#define LOCOMO_GPE		0x94	/* GPIO input enable */
+#define LOCOMO_GPL		0x98	/* GPIO level */
+#define LOCOMO_GPO		0x9c	/* GPIO out data setteing */
+#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
+#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
+#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
+#define LOCOMO_GWE		0xac	/* GPIO status write enable */
+#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
+#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
+#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
+#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
+#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
+#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
+#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
+#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
+#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
+#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
+#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
+#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
+#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
+#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
+#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
+#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
+
+/* Start the definitions of the devices.  Each device has an initial
+ * base address and a series of offsets from that base address. */
+
+/* Keyboard controller */
+#define LOCOMO_KEYBOARD		0x40
+#define LOCOMO_KIB		0x00	/* KIB level */
+#define LOCOMO_KSC		0x04	/* KSTRB control */
+#define LOCOMO_KCMD		0x08	/* KSTRB command */
+#define LOCOMO_KIC		0x0c	/* Key interrupt */
+
+/* Front light adjustment controller */
+#define LOCOMO_FRONTLIGHT	0xc8
+#define LOCOMO_ALS		0x00	/* Adjust light cycle */
+#define LOCOMO_ALD		0x04	/* Adjust light duty */
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_BACKLIGHT	0x38
+#define LOCOMO_TC		0x00		/* TFT control signal */
+#define LOCOMO_CPSD		0x04		/* CPS delay */
+
+/* Audio controller */
+#define LOCOMO_AUDIO		0x54
+#define LOCOMO_ACC		0x00	/* Audio clock */
+#define LOCOMO_PAIF		0x7C	/* PCM audio interface */
+/* Audio clock */
+#define	LOCOMO_ACC_XON		0x80
+#define	LOCOMO_ACC_XEN		0x40
+#define	LOCOMO_ACC_XSEL0	0x00
+#define	LOCOMO_ACC_XSEL1	0x20
+#define	LOCOMO_ACC_MCLKEN	0x10
+#define	LOCOMO_ACC_64FSEN	0x08
+#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
+#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
+#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
+#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
+#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
+#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
+/* PCM audio interface */
+#define	LOCOMO_PAIF_SCINV	0x20
+#define	LOCOMO_PAIF_SCEN	0x10
+#define	LOCOMO_PAIF_LRCRST	0x08
+#define	LOCOMO_PAIF_LRCEVE	0x04
+#define	LOCOMO_PAIF_LRCINV	0x02
+#define	LOCOMO_PAIF_LRCEN	0x01
+
+/* LED controller */
+#define LOCOMO_LED		0xe8
+#define LOCOMO_LPT0		0x00
+#define LOCOMO_LPT1		0x04
+/* LED control */
+#define LOCOMO_LPT_TOFH		0x80
+#define LOCOMO_LPT_TOFL		0x08
+#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
+
+extern struct bus_type locomo_bus_type;
+
+#define LOCOMO_DEVID_KEYBOARD	0
+#define LOCOMO_DEVID_FRONTLIGHT	1
+#define LOCOMO_DEVID_BACKLIGHT	2
+#define LOCOMO_DEVID_AUDIO	3
+#define LOCOMO_DEVID_LED	4
+#define LOCOMO_DEVID_UART	5
+
+struct locomo_dev {
+	struct device	dev;
+	unsigned int	devid;
+	unsigned int	irq[1];
+
+	void		*mapbase;
+	unsigned long	length;
+
+	u64		dma_mask;
+};
+
+#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
+
+#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct locomo_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct locomo_dev *);
+	int (*remove)(struct locomo_dev *);
+	int (*suspend)(struct locomo_dev *, pm_message_t);
+	int (*resume)(struct locomo_dev *);
+};
+
+#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
+
+#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
+
+void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+
+int locomo_driver_register(struct locomo_driver *);
+void locomo_driver_unregister(struct locomo_driver *);
+
+/* GPIO control functions */
+void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir);
+unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits);
+unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits);
+void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set);
+
+/* M62332 control function */
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
+
+#endif
diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h
new file mode 100644
index 000000000000..8aef5aa0e01b
--- /dev/null
+++ b/include/asm-arm/hardware/memc.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/hardware/memc.h
+ *
+ *  Copyright (C) Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VDMA_ALIGNMENT	PAGE_SIZE
+#define VDMA_XFERSIZE	16
+#define VDMA_INIT	0
+#define VDMA_START	1
+#define VDMA_END	2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset)				\
+do {								\
+	memc_write (VDMA_START, (start >> 2));			\
+	memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);	\
+	memc_write (VDMA_INIT, (offset >> 2));			\
+} while (0)
+
+#endif
diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h
new file mode 100644
index 000000000000..4d497bdb9a97
--- /dev/null
+++ b/include/asm-arm/hardware/pci_v3.h
@@ -0,0 +1,186 @@
+/*
+ *  linux/include/asm-arm/hardware/pci_v3.h
+ *
+ *  Internal header file PCI V3 chip
+ *
+ *  Copyright (C) ARM Limited
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef ASM_ARM_HARDWARE_PCI_V3_H
+#define ASM_ARM_HARDWARE_PCI_V3_H
+
+/* -------------------------------------------------------------------------------
+ *  V3 Local Bus to PCI Bridge definitions
+ * -------------------------------------------------------------------------------
+ *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
+ *  All V3 register names are prefaced by V3_ to avoid clashing with any other
+ *  PCI definitions.  Their names match the user's manual.
+ * 
+ *  I'm assuming that I20 is disabled.
+ * 
+ */
+#define V3_PCI_VENDOR                   0x00000000
+#define V3_PCI_DEVICE                   0x00000002
+#define V3_PCI_CMD                      0x00000004
+#define V3_PCI_STAT                     0x00000006
+#define V3_PCI_CC_REV                   0x00000008
+#define V3_PCI_HDR_CFG                  0x0000000C
+#define V3_PCI_IO_BASE                  0x00000010
+#define V3_PCI_BASE0                    0x00000014
+#define V3_PCI_BASE1                    0x00000018
+#define V3_PCI_SUB_VENDOR               0x0000002C
+#define V3_PCI_SUB_ID                   0x0000002E
+#define V3_PCI_ROM                      0x00000030
+#define V3_PCI_BPARAM                   0x0000003C
+#define V3_PCI_MAP0                     0x00000040
+#define V3_PCI_MAP1                     0x00000044
+#define V3_PCI_INT_STAT                 0x00000048
+#define V3_PCI_INT_CFG                  0x0000004C 
+#define V3_LB_BASE0                     0x00000054
+#define V3_LB_BASE1                     0x00000058
+#define V3_LB_MAP0                      0x0000005E
+#define V3_LB_MAP1                      0x00000062
+#define V3_LB_BASE2                     0x00000064
+#define V3_LB_MAP2                      0x00000066
+#define V3_LB_SIZE                      0x00000068
+#define V3_LB_IO_BASE                   0x0000006E
+#define V3_FIFO_CFG                     0x00000070
+#define V3_FIFO_PRIORITY                0x00000072
+#define V3_FIFO_STAT                    0x00000074
+#define V3_LB_ISTAT                     0x00000076
+#define V3_LB_IMASK                     0x00000077
+#define V3_SYSTEM                       0x00000078
+#define V3_LB_CFG                       0x0000007A
+#define V3_PCI_CFG                      0x0000007C
+#define V3_DMA_PCI_ADR0                 0x00000080
+#define V3_DMA_PCI_ADR1                 0x00000090
+#define V3_DMA_LOCAL_ADR0               0x00000084
+#define V3_DMA_LOCAL_ADR1               0x00000094
+#define V3_DMA_LENGTH0                  0x00000088
+#define V3_DMA_LENGTH1                  0x00000098
+#define V3_DMA_CSR0                     0x0000008B
+#define V3_DMA_CSR1                     0x0000009B
+#define V3_DMA_CTLB_ADR0                0x0000008C
+#define V3_DMA_CTLB_ADR1                0x0000009C
+#define V3_DMA_DELAY                    0x000000E0
+#define V3_MAIL_DATA                    0x000000C0
+#define V3_PCI_MAIL_IEWR                0x000000D0
+#define V3_PCI_MAIL_IERD                0x000000D2
+#define V3_LB_MAIL_IEWR                 0x000000D4
+#define V3_LB_MAIL_IERD                 0x000000D6
+#define V3_MAIL_WR_STAT                 0x000000D8
+#define V3_MAIL_RD_STAT                 0x000000DA
+#define V3_QBA_MAP                      0x000000DC
+
+/*  PCI COMMAND REGISTER bits
+ */
+#define V3_COMMAND_M_FBB_EN             (1 << 9)
+#define V3_COMMAND_M_SERR_EN            (1 << 8)
+#define V3_COMMAND_M_PAR_EN             (1 << 6)
+#define V3_COMMAND_M_MASTER_EN          (1 << 2)
+#define V3_COMMAND_M_MEM_EN             (1 << 1)
+#define V3_COMMAND_M_IO_EN              (1 << 0)
+
+/*  SYSTEM REGISTER bits
+ */
+#define V3_SYSTEM_M_RST_OUT             (1 << 15)
+#define V3_SYSTEM_M_LOCK                (1 << 14)
+
+/*  PCI_CFG bits
+ */
+#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
+#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
+#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
+#define V3_PCI_CFG_M_EN3V		(1 << 12)
+#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
+
+/*  PCI_BASE register bits (PCI -> Local Bus)
+ */
+#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
+#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
+#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
+#define V3_PCI_BASE_M_TYPE              (3 << 1)
+#define V3_PCI_BASE_M_IO                (1 << 0)
+
+/*  PCI MAP register bits (PCI -> Local bus)
+ */
+#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
+#define V3_PCI_MAP_M_SWAP               (3 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
+#define V3_PCI_MAP_M_REG_EN             (1 << 1)
+#define V3_PCI_MAP_M_ENABLE             (1 << 0)
+
+/*
+ *  LB_BASE0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_BASE_ADR_BASE		0xfff00000
+#define V3_LB_BASE_SWAP			(3 << 8)
+#define V3_LB_BASE_ADR_SIZE		(15 << 4)
+#define V3_LB_BASE_PREFETCH		(1 << 3)
+#define V3_LB_BASE_ENABLE		(1 << 0)
+
+#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
+#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
+#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
+#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
+#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
+#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
+#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
+#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
+#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
+#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
+#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
+#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
+
+#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
+
+/*
+ *  LB_MAP0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_MAP_MAP_ADR		0xfff0
+#define V3_LB_MAP_TYPE			(7 << 1)
+#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
+
+#define V3_LB_MAP_TYPE_IACK		(0 << 1)
+#define V3_LB_MAP_TYPE_IO		(1 << 1)
+#define V3_LB_MAP_TYPE_MEM		(3 << 1)
+#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
+#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
+
+#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
+
+/*
+ *  LB_BASE2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_BASE2_ADR_BASE		0xff00
+#define V3_LB_BASE2_SWAP		(3 << 6)
+#define V3_LB_BASE2_ENABLE		(1 << 0)
+
+#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
+
+/*
+ *  LB_MAP2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_MAP2_MAP_ADR		0xff00
+
+#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
+
+#endif
diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h
new file mode 100644
index 000000000000..319aea064c36
--- /dev/null
+++ b/include/asm-arm/hardware/sa1111.h
@@ -0,0 +1,602 @@
+/*
+ * linux/include/asm-arm/hardware/SA-1111.h
+ *
+ * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
+ *
+ * This file contains definitions for the SA-1111 Companion Chip.
+ * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.)
+ *
+ * Macro that calculates real address for registers in the SA-1111
+ */
+
+#ifndef _ASM_ARCH_SA1111
+#define _ASM_ARCH_SA1111
+
+#include <asm/arch/bitfield.h>
+
+/*
+ * The SA1111 is always located at virtual 0xf4000000, and is always
+ * "native" endian.
+ */
+
+#define SA1111_VBASE		0xf4000000
+
+/* Don't use these! */
+#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
+#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
+
+#ifndef __ASSEMBLY__
+#define _SA1111(x)	((x) + sa1111->resource.start)
+#endif
+
+/*
+ * 26 bits of the SA-1110 address bus are available to the SA-1111.
+ * Use these when feeding target addresses to the DMA engines.
+ */
+
+#define SA1111_ADDR_WIDTH	(26)
+#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
+#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
+
+/*
+ * Don't ask the (SAC) DMA engines to move less than this amount.
+ */
+
+#define SA1111_SAC_DMA_MIN_XFER	(0x800)
+
+/*
+ * SA1111 register definitions.
+ */
+#define __CCREG(x)	__REGP(SA1111_VBASE + (x))
+
+#define sa1111_writel(val,addr)	__raw_writel(val, addr)
+#define sa1111_readl(addr)	__raw_readl(addr)
+
+/*
+ * System Bus Interface (SBI)
+ *
+ * Registers
+ *    SKCR	Control Register
+ *    SMCR	Shared Memory Controller Register
+ *    SKID	ID Register
+ */
+#define SA1111_SKCR	0x0000
+#define SA1111_SMCR	0x0004
+#define SA1111_SKID	0x0008
+
+#define SKCR_PLL_BYPASS	(1<<0)
+#define SKCR_RCLKEN	(1<<1)
+#define SKCR_SLEEP	(1<<2)
+#define SKCR_DOZE	(1<<3)
+#define SKCR_VCO_OFF	(1<<4)
+#define SKCR_SCANTSTEN	(1<<5)
+#define SKCR_CLKTSTEN	(1<<6)
+#define SKCR_RDYEN	(1<<7)
+#define SKCR_SELAC	(1<<8)
+#define SKCR_OPPC	(1<<9)
+#define SKCR_PLLTSTEN	(1<<10)
+#define SKCR_USBIOTSTEN	(1<<11)
+/*
+ * Don't believe the specs!  Take them, throw them outside.  Leave them
+ * there for a week.  Spit on them.  Walk on them.  Stamp on them.
+ * Pour gasoline over them and finally burn them.  Now think about coding.
+ *  - The October 1999 errata (278260-007) says its bit 13, 1 to enable.
+ *  - The Feb 2001 errata (278260-010) says that the previous errata
+ *    (278260-009) is wrong, and its bit actually 12, fixed in spec
+ *    278242-003.
+ *  - The SA1111 manual (278242) says bit 12, but 0 to enable.
+ *  - Reality is bit 13, 1 to enable.
+ *      -- rmk
+ */
+#define SKCR_OE_EN	(1<<13)
+
+#define SMCR_DTIM	(1<<0)
+#define SMCR_MBGE	(1<<1)
+#define SMCR_DRAC_0	(1<<2)
+#define SMCR_DRAC_1	(1<<3)
+#define SMCR_DRAC_2	(1<<4)
+#define SMCR_DRAC	Fld(3, 2)
+#define SMCR_CLAT	(1<<5)
+
+#define SKID_SIREV_MASK	(0x000000f0)
+#define SKID_MTREV_MASK (0x0000000f)
+#define SKID_ID_MASK	(0xffffff00)
+#define SKID_SA1111_ID	(0x690cc200)
+
+/*
+ * System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    SKAUD	Audio Clock Divider Register
+ *    SKPMC	PS/2 Mouse Clock Divider Register
+ *    SKPTC	PS/2 Track Pad Clock Divider Register
+ *    SKPEN0	PWM0 Enable Register
+ *    SKPWM0	PWM0 Clock Register
+ *    SKPEN1	PWM1 Enable Register
+ *    SKPWM1	PWM1 Clock Register
+ */
+#define SA1111_SKPCR	0x0200
+#define SA1111_SKCDR	0x0204
+#define SA1111_SKAUD	0x0208
+#define SA1111_SKPMC	0x020c
+#define SA1111_SKPTC	0x0210
+#define SA1111_SKPEN0	0x0214
+#define SA1111_SKPWM0	0x0218
+#define SA1111_SKPEN1	0x021c
+#define SA1111_SKPWM1	0x0220
+
+#define SKPCR_UCLKEN	(1<<0)
+#define SKPCR_ACCLKEN	(1<<1)
+#define SKPCR_I2SCLKEN	(1<<2)
+#define SKPCR_L3CLKEN	(1<<3)
+#define SKPCR_SCLKEN	(1<<4)
+#define SKPCR_PMCLKEN	(1<<5)
+#define SKPCR_PTCLKEN	(1<<6)
+#define SKPCR_DCLKEN	(1<<7)
+#define SKPCR_PWMCLKEN	(1<<8)
+
+/*
+ * USB Host controller
+ */
+#define SA1111_USB		0x0400
+
+/*
+ * Offsets from SA1111_USB_BASE
+ */
+#define SA1111_USB_STATUS	0x0118
+#define SA1111_USB_RESET	0x011c
+#define SA1111_USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
+
+/*
+ * Serial Audio Controller
+ *
+ * Registers
+ *    SACR0             Serial Audio Common Control Register
+ *    SACR1             Serial Audio Alternate Mode (I2C/MSB) Control Register
+ *    SACR2             Serial Audio AC-link Control Register
+ *    SASR0             Serial Audio I2S/MSB Interface & FIFO Status Register
+ *    SASR1             Serial Audio AC-link Interface & FIFO Status Register
+ *    SASCR             Serial Audio Status Clear Register
+ *    L3_CAR            L3 Control Bus Address Register
+ *    L3_CDR            L3 Control Bus Data Register
+ *    ACCAR             AC-link Command Address Register
+ *    ACCDR             AC-link Command Data Register
+ *    ACSAR             AC-link Status Address Register
+ *    ACSDR             AC-link Status Data Register
+ *    SADTCS            Serial Audio DMA Transmit Control/Status Register
+ *    SADTSA            Serial Audio DMA Transmit Buffer Start Address A
+ *    SADTCA            Serial Audio DMA Transmit Buffer Count Register A
+ *    SADTSB            Serial Audio DMA Transmit Buffer Start Address B
+ *    SADTCB            Serial Audio DMA Transmit Buffer Count Register B
+ *    SADRCS            Serial Audio DMA Receive Control/Status Register
+ *    SADRSA            Serial Audio DMA Receive Buffer Start Address A
+ *    SADRCA            Serial Audio DMA Receive Buffer Count Register A
+ *    SADRSB            Serial Audio DMA Receive Buffer Start Address B
+ *    SADRCB            Serial Audio DMA Receive Buffer Count Register B
+ *    SAITR             Serial Audio Interrupt Test Register
+ *    SADR              Serial Audio Data Register (16 x 32-bit)
+ */
+
+#define _SACR0          _SA1111( 0x0600 )
+#define _SACR1          _SA1111( 0x0604 )
+#define _SACR2          _SA1111( 0x0608 )
+#define _SASR0          _SA1111( 0x060c )
+#define _SASR1          _SA1111( 0x0610 )
+#define _SASCR          _SA1111( 0x0618 )
+#define _L3_CAR         _SA1111( 0x061c )
+#define _L3_CDR         _SA1111( 0x0620 )
+#define _ACCAR          _SA1111( 0x0624 )
+#define _ACCDR          _SA1111( 0x0628 )
+#define _ACSAR          _SA1111( 0x062c )
+#define _ACSDR          _SA1111( 0x0630 )
+#define _SADTCS         _SA1111( 0x0634 )
+#define _SADTSA         _SA1111( 0x0638 )
+#define _SADTCA         _SA1111( 0x063c )
+#define _SADTSB         _SA1111( 0x0640 )
+#define _SADTCB         _SA1111( 0x0644 )
+#define _SADRCS         _SA1111( 0x0648 )
+#define _SADRSA         _SA1111( 0x064c )
+#define _SADRCA         _SA1111( 0x0650 )
+#define _SADRSB         _SA1111( 0x0654 )
+#define _SADRCB         _SA1111( 0x0658 )
+#define _SAITR          _SA1111( 0x065c )
+#define _SADR           _SA1111( 0x0680 )
+
+#define SACR0		__CCREG(0x0600)
+#define SACR1		__CCREG(0x0604)
+#define SACR2		__CCREG(0x0608)
+#define SASR0		__CCREG(0x060c)
+#define SASR1		__CCREG(0x0610)
+#define SASCR		__CCREG(0x0618)
+#define L3_CAR		__CCREG(0x061c)
+#define L3_CDR		__CCREG(0x0620)
+#define ACCAR		__CCREG(0x0624)
+#define ACCDR		__CCREG(0x0628)
+#define ACSAR		__CCREG(0x062c)
+#define ACSDR		__CCREG(0x0630)
+#define SADTCS		__CCREG(0x0634)
+#define SADTSA		__CCREG(0x0638)
+#define SADTCA		__CCREG(0x063c)
+#define SADTSB		__CCREG(0x0640)
+#define SADTCB		__CCREG(0x0644)
+#define SADRCS		__CCREG(0x0648)
+#define SADRSA		__CCREG(0x064c)
+#define SADRCA		__CCREG(0x0650)
+#define SADRSB		__CCREG(0x0654)
+#define SADRCB		__CCREG(0x0658)
+#define SAITR		__CCREG(0x065c)
+#define SADR		__CCREG(0x0680)
+
+#define SACR0_ENB	(1<<0)
+#define SACR0_BCKD	(1<<2)
+#define SACR0_RST	(1<<3)
+
+#define SACR1_AMSL	(1<<0)
+#define SACR1_L3EN	(1<<1)
+#define SACR1_L3MB	(1<<2)
+#define SACR1_DREC	(1<<3)
+#define SACR1_DRPL	(1<<4)
+#define SACR1_ENLBF	(1<<5)
+
+#define SACR2_TS3V	(1<<0)
+#define SACR2_TS4V	(1<<1)
+#define SACR2_WKUP	(1<<2)
+#define SACR2_DREC	(1<<3)
+#define SACR2_DRPL	(1<<4)
+#define SACR2_ENLBF	(1<<5)
+#define SACR2_RESET	(1<<6)
+
+#define SASR0_TNF	(1<<0)
+#define SASR0_RNE	(1<<1)
+#define SASR0_BSY	(1<<2)
+#define SASR0_TFS	(1<<3)
+#define SASR0_RFS	(1<<4)
+#define SASR0_TUR	(1<<5)
+#define SASR0_ROR	(1<<6)
+#define SASR0_L3WD	(1<<16)
+#define SASR0_L3RD	(1<<17)
+
+#define SASR1_TNF	(1<<0)
+#define SASR1_RNE	(1<<1)
+#define SASR1_BSY	(1<<2)
+#define SASR1_TFS	(1<<3)
+#define SASR1_RFS	(1<<4)
+#define SASR1_TUR	(1<<5)
+#define SASR1_ROR	(1<<6)
+#define SASR1_CADT	(1<<16)
+#define SASR1_SADR	(1<<17)
+#define SASR1_RSTO	(1<<18)
+#define SASR1_CLPM	(1<<19)
+#define SASR1_CRDY	(1<<20)
+#define SASR1_RS3V	(1<<21)
+#define SASR1_RS4V	(1<<22)
+
+#define SASCR_TUR	(1<<5)
+#define SASCR_ROR	(1<<6)
+#define SASCR_DTS	(1<<16)
+#define SASCR_RDD	(1<<17)
+#define SASCR_STO	(1<<18)
+
+#define SADTCS_TDEN	(1<<0)
+#define SADTCS_TDIE	(1<<1)
+#define SADTCS_TDBDA	(1<<3)
+#define SADTCS_TDSTA	(1<<4)
+#define SADTCS_TDBDB	(1<<5)
+#define SADTCS_TDSTB	(1<<6)
+#define SADTCS_TBIU	(1<<7)
+
+#define SADRCS_RDEN	(1<<0)
+#define SADRCS_RDIE	(1<<1)
+#define SADRCS_RDBDA	(1<<3)
+#define SADRCS_RDSTA	(1<<4)
+#define SADRCS_RDBDB	(1<<5)
+#define SADRCS_RDSTB	(1<<6)
+#define SADRCS_RBIU	(1<<7)
+
+#define SAD_CS_DEN	(1<<0)
+#define SAD_CS_DIE	(1<<1)	/* Not functional on metal 1 */
+#define SAD_CS_DBDA	(1<<3)	/* Not functional on metal 1 */
+#define SAD_CS_DSTA	(1<<4)
+#define SAD_CS_DBDB	(1<<5)	/* Not functional on metal 1 */
+#define SAD_CS_DSTB	(1<<6)
+#define SAD_CS_BIU	(1<<7)	/* Not functional on metal 1 */
+
+#define SAITR_TFS	(1<<0)
+#define SAITR_RFS	(1<<1)
+#define SAITR_TUR	(1<<2)
+#define SAITR_ROR	(1<<3)
+#define SAITR_CADT	(1<<4)
+#define SAITR_SADR	(1<<5)
+#define SAITR_RSTO	(1<<6)
+#define SAITR_TDBDA	(1<<8)
+#define SAITR_TDBDB	(1<<9)
+#define SAITR_RDBDA	(1<<10)
+#define SAITR_RDBDB	(1<<11)
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PA_DDR		GPIO Block A Data Direction
+ *    PA_DRR/PA_DWR	GPIO Block A Data Value Register (read/write)
+ *    PA_SDR		GPIO Block A Sleep Direction
+ *    PA_SSR		GPIO Block A Sleep State
+ *    PB_DDR		GPIO Block B Data Direction
+ *    PB_DRR/PB_DWR	GPIO Block B Data Value Register (read/write)
+ *    PB_SDR		GPIO Block B Sleep Direction
+ *    PB_SSR		GPIO Block B Sleep State
+ *    PC_DDR		GPIO Block C Data Direction
+ *    PC_DRR/PC_DWR	GPIO Block C Data Value Register (read/write)
+ *    PC_SDR		GPIO Block C Sleep Direction
+ *    PC_SSR		GPIO Block C Sleep State
+ */
+
+#define _PA_DDR		_SA1111( 0x1000 )
+#define _PA_DRR		_SA1111( 0x1004 )
+#define _PA_DWR		_SA1111( 0x1004 )
+#define _PA_SDR		_SA1111( 0x1008 )
+#define _PA_SSR		_SA1111( 0x100c )
+#define _PB_DDR		_SA1111( 0x1010 )
+#define _PB_DRR		_SA1111( 0x1014 )
+#define _PB_DWR		_SA1111( 0x1014 )
+#define _PB_SDR		_SA1111( 0x1018 )
+#define _PB_SSR		_SA1111( 0x101c )
+#define _PC_DDR		_SA1111( 0x1020 )
+#define _PC_DRR		_SA1111( 0x1024 )
+#define _PC_DWR		_SA1111( 0x1024 )
+#define _PC_SDR		_SA1111( 0x1028 )
+#define _PC_SSR		_SA1111( 0x102c )
+
+#define SA1111_GPIO	0x1000
+
+#define SA1111_GPIO_PADDR	(0x000)
+#define SA1111_GPIO_PADRR	(0x004)
+#define SA1111_GPIO_PADWR	(0x004)
+#define SA1111_GPIO_PASDR	(0x008)
+#define SA1111_GPIO_PASSR	(0x00c)
+#define SA1111_GPIO_PBDDR	(0x010)
+#define SA1111_GPIO_PBDRR	(0x014)
+#define SA1111_GPIO_PBDWR	(0x014)
+#define SA1111_GPIO_PBSDR	(0x018)
+#define SA1111_GPIO_PBSSR	(0x01c)
+#define SA1111_GPIO_PCDDR	(0x020)
+#define SA1111_GPIO_PCDRR	(0x024)
+#define SA1111_GPIO_PCDWR	(0x024)
+#define SA1111_GPIO_PCSDR	(0x028)
+#define SA1111_GPIO_PCSSR	(0x02c)
+
+#define GPIO_A0		(1 << 0)
+#define GPIO_A1		(1 << 1)
+#define GPIO_A2		(1 << 2)
+#define GPIO_A3		(1 << 3)
+
+#define GPIO_B0		(1 << 8)
+#define GPIO_B1		(1 << 9)
+#define GPIO_B2		(1 << 10)
+#define GPIO_B3		(1 << 11)
+#define GPIO_B4		(1 << 12)
+#define GPIO_B5		(1 << 13)
+#define GPIO_B6		(1 << 14)
+#define GPIO_B7		(1 << 15)
+
+#define GPIO_C0		(1 << 16)
+#define GPIO_C1		(1 << 17)
+#define GPIO_C2		(1 << 18)
+#define GPIO_C3		(1 << 19)
+#define GPIO_C4		(1 << 20)
+#define GPIO_C5		(1 << 21)
+#define GPIO_C6		(1 << 22)
+#define GPIO_C7		(1 << 23)
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTEN0		Interrupt Enable register 0
+ *    INTEN1		Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status/Clear 0
+ *    INTSTATCLR1	Interrupt Status/Clear 1
+ *    INTSET0		Interrupt source set 0
+ *    INTSET1		Interrupt source set 1
+ *    WAKE_EN0		Wake-up source enable 0
+ *    WAKE_EN1		Wake-up source enable 1
+ *    WAKE_POL0		Wake-up polarity selection 0
+ *    WAKE_POL1		Wake-up polarity selection 1
+ */
+#define SA1111_INTC		0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_INTTEST0		0x0000
+#define SA1111_INTTEST1		0x0004
+#define SA1111_INTEN0		0x0008
+#define SA1111_INTEN1		0x000c
+#define SA1111_INTPOL0		0x0010
+#define SA1111_INTPOL1		0x0014
+#define SA1111_INTTSTSEL	0x0018
+#define SA1111_INTSTATCLR0	0x001c
+#define SA1111_INTSTATCLR1	0x0020
+#define SA1111_INTSET0		0x0024
+#define SA1111_INTSET1		0x0028
+#define SA1111_WAKEEN0		0x002c
+#define SA1111_WAKEEN1		0x0030
+#define SA1111_WAKEPOL0		0x0034
+#define SA1111_WAKEPOL1		0x0038
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers
+ *    PS2CR		Control Register
+ *    PS2STAT		Status Register
+ *    PS2DATA		Transmit/Receive Data register
+ *    PS2CLKDIV		Clock Division Register
+ *    PS2PRECNT		Clock Precount Register
+ *    PS2TEST1		Test register 1
+ *    PS2TEST2		Test register 2
+ *    PS2TEST3		Test register 3
+ *    PS2TEST4		Test register 4
+ */
+
+#define SA1111_KBD		0x0a00
+#define SA1111_MSE		0x0c00
+
+/*
+ * These are offsets from the above bases.
+ */
+#define SA1111_PS2CR		0x0000
+#define SA1111_PS2STAT		0x0004
+#define SA1111_PS2DATA		0x0008
+#define SA1111_PS2CLKDIV	0x000c
+#define SA1111_PS2PRECNT	0x0010
+
+#define PS2CR_ENA		0x08
+#define PS2CR_FKD		0x02
+#define PS2CR_FKC		0x01
+
+#define PS2STAT_STP		0x0100
+#define PS2STAT_TXE		0x0080
+#define PS2STAT_TXB		0x0040
+#define PS2STAT_RXF		0x0020
+#define PS2STAT_RXB		0x0010
+#define PS2STAT_ENA		0x0008
+#define PS2STAT_RXP		0x0004
+#define PS2STAT_KBD		0x0002
+#define PS2STAT_KBC		0x0001
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ */
+
+#define SA1111_PCMCIA	0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_PCCR	0x0000
+#define SA1111_PCSSR	0x0004
+#define SA1111_PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
+
+
+
+extern struct bus_type sa1111_bus_type;
+
+#define SA1111_DEVID_SBI	0
+#define SA1111_DEVID_SK		1
+#define SA1111_DEVID_USB	2
+#define SA1111_DEVID_SAC	3
+#define SA1111_DEVID_SSP	4
+#define SA1111_DEVID_PS2	5
+#define SA1111_DEVID_GPIO	6
+#define SA1111_DEVID_INT	7
+#define SA1111_DEVID_PCMCIA	8
+
+struct sa1111_dev {
+	struct device	dev;
+	unsigned int	devid;
+	struct resource	res;
+	void __iomem	*mapbase;
+	unsigned int	skpcr_mask;
+	unsigned int	irq[6];
+	u64		dma_mask;
+};
+
+#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
+
+#define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct sa1111_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct sa1111_dev *);
+	int (*remove)(struct sa1111_dev *);
+	int (*suspend)(struct sa1111_dev *, pm_message_t);
+	int (*resume)(struct sa1111_dev *);
+};
+
+#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
+
+#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
+
+/*
+ * These frob the SKPCR register.
+ */
+void sa1111_enable_device(struct sa1111_dev *);
+void sa1111_disable_device(struct sa1111_dev *);
+
+unsigned int sa1111_pll_clock(struct sa1111_dev *);
+
+#define SA1111_AUDIO_ACLINK	0
+#define SA1111_AUDIO_I2S	1
+
+void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode);
+int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate);
+int sa1111_get_audio_rate(struct sa1111_dev *sadev);
+
+int sa1111_check_dma_bug(dma_addr_t addr);
+
+int sa1111_driver_register(struct sa1111_driver *);
+void sa1111_driver_unregister(struct sa1111_driver *);
+
+void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
+void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+
+#endif  /* _ASM_ARCH_SA1111 */
diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h
new file mode 100644
index 000000000000..7ea771ff6144
--- /dev/null
+++ b/include/asm-arm/hardware/scoop.h
@@ -0,0 +1,47 @@
+/*
+ *  Definitions for the SCOOP interface found on various Sharp PDAs
+ *
+ *  Copyright (c) 2004 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define SCOOP_MCR  0x00
+#define SCOOP_CDR  0x04
+#define SCOOP_CSR  0x08
+#define SCOOP_CPR  0x0C
+#define SCOOP_CCR  0x10
+#define SCOOP_IRR  0x14
+#define SCOOP_IRM  0x14
+#define SCOOP_IMR  0x18
+#define SCOOP_ISR  0x1C
+#define SCOOP_GPCR 0x20
+#define SCOOP_GPWR 0x24
+#define SCOOP_GPRR 0x28
+
+#define SCOOP_GPCR_PA22	( 1 << 12 )
+#define SCOOP_GPCR_PA21	( 1 << 11 )
+#define SCOOP_GPCR_PA20	( 1 << 10 )
+#define SCOOP_GPCR_PA19	( 1 << 9 )
+#define SCOOP_GPCR_PA18	( 1 << 8 )
+#define SCOOP_GPCR_PA17	( 1 << 7 )
+#define SCOOP_GPCR_PA16	( 1 << 6 )
+#define SCOOP_GPCR_PA15	( 1 << 5 )
+#define SCOOP_GPCR_PA14	( 1 << 4 )
+#define SCOOP_GPCR_PA13	( 1 << 3 )
+#define SCOOP_GPCR_PA12	( 1 << 2 )
+#define SCOOP_GPCR_PA11	( 1 << 1 )
+
+struct scoop_config {
+	unsigned short io_out;
+	unsigned short io_dir;
+};
+
+void reset_scoop(struct device *dev);
+unsigned short set_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
+void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h
new file mode 100644
index 000000000000..28aa11b769cd
--- /dev/null
+++ b/include/asm-arm/hardware/ssp.h
@@ -0,0 +1,28 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SSP_H
+#define SSP_H
+
+struct ssp_state {
+	unsigned int	cr0;
+	unsigned int	cr1;
+};
+
+int ssp_write_word(u16 data);
+int ssp_read_word(void);
+void ssp_flush(void);
+void ssp_enable(void);
+void ssp_disable(void);
+void ssp_save_state(struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_state *ssp);
+int ssp_init(void);
+void ssp_exit(void);
+
+#endif
diff --git a/include/asm-arm/hdreg.h b/include/asm-arm/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-arm/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
new file mode 100644
index 000000000000..2114acb3d237
--- /dev/null
+++ b/include/asm-arm/ide.h
@@ -0,0 +1,36 @@
+/*
+ *  linux/include/asm-arm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the i386 architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4
+#endif
+
+#if !defined(CONFIG_ARCH_L7200)
+# define IDE_ARCH_OBSOLETE_INIT
+# ifdef CONFIG_ARCH_CLPS7500
+#  define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+# else
+#  define ide_default_io_ctl(base)	(0)
+# endif
+#endif /* !ARCH_L7200 */
+
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
new file mode 100644
index 000000000000..69bc7a3e8160
--- /dev/null
+++ b/include/asm-arm/io.h
@@ -0,0 +1,286 @@
+/*
+ *  linux/include/asm-arm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(void __iomem *addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#include <asm/arch/io.h>
+
+#ifdef __io_pci
+#warning machine class uses buggy __io_pci
+#endif
+#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \
+    defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl)
+#warning machine class uses old __arch_putw or __arch_getw
+#endif
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)		__raw_writeb(v,__io(p))
+#define outw(v,p)		__raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p)		__raw_writel(cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)	outb((val),(port))
+#define outw_p(val,port)	outw((val),(port))
+#define outl_p(val,port)	outl((val),(port))
+#define inb_p(port)		inb((port))
+#define inw_p(port)		inw((port))
+#define inl_p(port)		inl((port))
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define outsl_p(port,from,len)	outsl(port,from,len)
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+#define insl_p(port,to,len)	insl(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, void __iomem *, size_t);
+extern void _memcpy_toio(void __iomem *, const void *, size_t);
+extern void _memset_io(void __iomem *, int, size_t);
+
+#define mmiowb()
+
+/*
+ *  Memory access primitives
+ *  ------------------------
+ *
+ * These perform PCI memory accesses via an ioremap region.  They don't
+ * take an address as such, but a cookie.
+ *
+ * Again, this are defined to perform little endian accesses.  See the
+ * IO port primitives for more information.
+ */
+#ifdef __mem_pci
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
+#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
+#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
+
+#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
+#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
+#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
+
+#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(void __iomem *io_addr, const unsigned char *signature,
+		int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#elif !defined(readb)
+
+#define readb(c)			(__readwrite_bug("readb"),0)
+#define readw(c)			(__readwrite_bug("readw"),0)
+#define readl(c)			(__readwrite_bug("readl"),0)
+#define writeb(v,c)			__readwrite_bug("writeb")
+#define writew(v,c)			__readwrite_bug("writew")
+#define writel(v,c)			__readwrite_bug("writel")
+
+#define eth_io_copy_and_sum(s,c,l,b)	__readwrite_bug("eth_io_copy_and_sum")
+
+#define check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_pci */
+
+/*
+ * If this architecture has ISA IO, then define the isa_read/isa_write
+ * macros.
+ */
+#ifdef __mem_isa
+
+#define isa_readb(addr)			__raw_readb(__mem_isa(addr))
+#define isa_readw(addr)			__raw_readw(__mem_isa(addr))
+#define isa_readl(addr)			__raw_readl(__mem_isa(addr))
+#define isa_writeb(val,addr)		__raw_writeb(val,__mem_isa(addr))
+#define isa_writew(val,addr)		__raw_writew(val,__mem_isa(addr))
+#define isa_writel(val,addr)		__raw_writel(val,__mem_isa(addr))
+#define isa_memset_io(a,b,c)		_memset_io(__mem_isa(a),(b),(c))
+#define isa_memcpy_fromio(a,b,c)	_memcpy_fromio((a),__mem_isa(b),(c))
+#define isa_memcpy_toio(a,b,c)		_memcpy_toio(__mem_isa((a)),(b),(c))
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				eth_copy_and_sum((a),__mem_isa(b),(c),(d))
+
+#else	/* __mem_isa */
+
+#define isa_readb(addr)			(__readwrite_bug("isa_readb"),0)
+#define isa_readw(addr)			(__readwrite_bug("isa_readw"),0)
+#define isa_readl(addr)			(__readwrite_bug("isa_readl"),0)
+#define isa_writeb(val,addr)		__readwrite_bug("isa_writeb")
+#define isa_writew(val,addr)		__readwrite_bug("isa_writew")
+#define isa_writel(val,addr)		__readwrite_bug("isa_writel")
+#define isa_memset_io(a,b,c)		__readwrite_bug("isa_memset_io")
+#define isa_memcpy_fromio(a,b,c)	__readwrite_bug("isa_memcpy_fromio")
+#define isa_memcpy_toio(a,b,c)		__readwrite_bug("isa_memcpy_toio")
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				__readwrite_bug("isa_eth_io_copy_and_sum")
+
+#endif	/* __mem_isa */
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ */
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
+extern void __iounmap(void __iomem *addr);
+
+#ifndef __arch_ioremap
+#define ioremap(cookie,size)		__ioremap(cookie,size,0,1)
+#define ioremap_nocache(cookie,size)	__ioremap(cookie,size,0,1)
+#define ioremap_cached(cookie,size)	__ioremap(cookie,size,L_PTE_CACHEABLE,1)
+#define iounmap(cookie)			__iounmap(cookie)
+#else
+#define ioremap(cookie,size)		__arch_ioremap((cookie),(size),0,1)
+#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie),(size),0,1)
+#define ioremap_cached(cookie,size)	__arch_ioremap((cookie),(size),L_PTE_CACHEABLE,1)
+#define iounmap(cookie)			__arch_iounmap(cookie)
+#endif
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_ARM_IO_H */
diff --git a/include/asm-arm/ioctl.h b/include/asm-arm/ioctl.h
new file mode 100644
index 000000000000..2cbb7d0e9dc6
--- /dev/null
+++ b/include/asm-arm/ioctl.h
@@ -0,0 +1,74 @@
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASMARM_IOCTL_H
+#define _ASMARM_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASMARM_IOCTL_H */
diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
new file mode 100644
index 000000000000..bb9a7aa10c12
--- /dev/null
+++ b/include/asm-arm/ioctls.h
@@ -0,0 +1,80 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-arm/ipc.h b/include/asm-arm/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-arm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-arm/ipcbuf.h b/include/asm-arm/ipcbuf.h
new file mode 100644
index 000000000000..97683975f7df
--- /dev/null
+++ b/include/asm-arm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_IPCBUF_H
+#define __ASMARM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASMARM_IPCBUF_H */
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
new file mode 100644
index 000000000000..f97912fbb10f
--- /dev/null
+++ b/include/asm-arm/irq.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <asm/arch/irqs.h>
+
+#ifndef irq_canonicalize
+#define irq_canonicalize(i)	(i)
+#endif
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ	((unsigned int)(-1))
+#endif
+
+struct irqaction;
+
+extern void disable_irq_nosync(unsigned int);
+extern void disable_irq(unsigned int);
+extern void enable_irq(unsigned int);
+
+#define __IRQT_FALEDGE	(1 << 0)
+#define __IRQT_RISEDGE	(1 << 1)
+#define __IRQT_LOWLVL	(1 << 2)
+#define __IRQT_HIGHLVL	(1 << 3)
+
+#define IRQT_NOEDGE	(0)
+#define IRQT_RISING	(__IRQT_RISEDGE)
+#define IRQT_FALLING	(__IRQT_FALEDGE)
+#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
+#define IRQT_LOW	(__IRQT_LOWLVL)
+#define IRQT_HIGH	(__IRQT_HIGHLVL)
+#define IRQT_PROBE	(1 << 4)
+
+int set_irq_type(unsigned int irq, unsigned int type);
+void disable_irq_wake(unsigned int irq);
+void enable_irq_wake(unsigned int irq);
+int setup_irq(unsigned int, struct irqaction *);
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
+
diff --git a/include/asm-arm/kmap_types.h b/include/asm-arm/kmap_types.h
new file mode 100644
index 000000000000..45def13ee17a
--- /dev/null
+++ b/include/asm-arm/kmap_types.h
@@ -0,0 +1,24 @@
+#ifndef __ARM_KMAP_TYPES_H
+#define __ARM_KMAP_TYPES_H
+
+/*
+ * This is the "bare minimum".  AIO seems to require this.
+ */
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-arm/leds.h b/include/asm-arm/leds.h
new file mode 100644
index 000000000000..88ce4124f854
--- /dev/null
+++ b/include/asm-arm/leds.h
@@ -0,0 +1,51 @@
+/*
+ *  linux/include/asm-arm/leds.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Event-driven interface for LEDs on machines
+ *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
+ */
+#ifndef ASM_ARM_LEDS_H
+#define ASM_ARM_LEDS_H
+
+#include <linux/config.h>
+
+typedef enum {
+	led_idle_start,
+	led_idle_end,
+	led_timer,
+	led_start,
+	led_stop,
+	led_claim,		/* override idle & timer leds */
+	led_release,		/* restore idle & timer leds */
+	led_start_timer_mode,
+	led_stop_timer_mode,
+	led_green_on,
+	led_green_off,
+	led_amber_on,
+	led_amber_off,
+	led_red_on,
+	led_red_off,
+	led_blue_on,
+	led_blue_off,
+	/*
+	 * I want this between led_timer and led_start, but
+	 * someone has decided to export this to user space
+	 */
+	led_halted
+} led_event_t;
+
+/* Use this routine to handle LEDs */
+
+#ifdef CONFIG_LEDS
+extern void (*leds_event)(led_event_t);
+#else
+#define leds_event(e)
+#endif
+
+#endif
diff --git a/include/asm-arm/limits.h b/include/asm-arm/limits.h
new file mode 100644
index 000000000000..08d8c6600804
--- /dev/null
+++ b/include/asm-arm/limits.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_PIPE_H
+#define __ASM_PIPE_H
+
+#ifndef PAGE_SIZE
+#include <asm/page.h>
+#endif
+
+#define PIPE_BUF	PAGE_SIZE
+
+#endif
+
diff --git a/include/asm-arm/linkage.h b/include/asm-arm/linkage.h
new file mode 100644
index 000000000000..dbe4b4e31a5b
--- /dev/null
+++ b/include/asm-arm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif
diff --git a/include/asm-arm/local.h b/include/asm-arm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/include/asm-arm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h
new file mode 100644
index 000000000000..c26298f3891f
--- /dev/null
+++ b/include/asm-arm/locks.h
@@ -0,0 +1,262 @@
+/*
+ *  linux/include/asm-arm/locks.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Interrupt safe locking assembler. 
+ */
+#ifndef __ASM_PROC_LOCKS_H
+#define __ASM_PROC_LOCKS_H
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"1:	ldrex	lr, [%1]\n"			\
+"	sub	lr, lr, %2\n"			\
+"	strex	ip, lr, [%1]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#else
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%1]\n"			\
+"	subs	lr, lr, %2\n"			\
+"	str	lr, [%1]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc", "memory");		\
+	})
+
+#endif
+
+#endif
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
new file mode 100644
index 000000000000..3a32e929ec8c
--- /dev/null
+++ b/include/asm-arm/mach/arch.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/asm-arm/mach/arch.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct tag;
+struct meminfo;
+struct sys_timer;
+
+struct machine_desc {
+	/*
+	 * Note! The first five elements are used
+	 * by assembler code in head-armv.S
+	 */
+	unsigned int		nr;		/* architecture number	*/
+	unsigned int		phys_ram;	/* start of physical ram */
+	unsigned int		phys_io;	/* start of physical io	*/
+	unsigned int		io_pg_offst;	/* byte offset for io 
+						 * page tabe entry	*/
+
+	const char		*name;		/* architecture name	*/
+	unsigned int		param_offset;	/* parameter page	*/
+
+	unsigned int		video_start;	/* start of video RAM	*/
+	unsigned int		video_end;	/* end of video RAM	*/
+
+	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
+	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
+	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
+	unsigned int		soft_reboot :1;	/* soft reboot		*/
+	void			(*fixup)(struct machine_desc *,
+					 struct tag *, char **,
+					 struct meminfo *);
+	void			(*map_io)(void);/* IO mapping function	*/
+	void			(*init_irq)(void);
+	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_machine)(void);
+};
+
+/*
+ * Set of macros to define architecture features.  This is built into
+ * a table by the linker.
+ */
+#define MACHINE_START(_type,_name)		\
+const struct machine_desc __mach_desc_##_type	\
+ __attribute__((__section__(".arch.info"))) = {	\
+	.nr		= MACH_TYPE_##_type,	\
+	.name		= _name,
+
+#define MAINTAINER(n)
+
+#define BOOT_MEM(_pram,_pio,_vio)		\
+	.phys_ram	= _pram,		\
+	.phys_io	= _pio,			\
+	.io_pg_offst	= ((_vio)>>18)&0xfffc,
+
+#define BOOT_PARAMS(_params)			\
+	.param_offset	= _params,
+
+#define VIDEO(_start,_end)			\
+	.video_start	= _start,		\
+	.video_end	= _end,
+
+#define DISABLE_PARPORT(_n)			\
+	.reserve_lp##_n	= 1,
+
+#define SOFT_REBOOT				\
+	.soft_reboot	= 1,
+
+#define FIXUP(_func)				\
+	.fixup		= _func,
+
+#define MAPIO(_func)				\
+	.map_io		= _func,
+
+#define INITIRQ(_func)				\
+	.init_irq	= _func,
+
+#define INIT_MACHINE(_func)			\
+	.init_machine	= _func,
+
+#define MACHINE_END				\
+};
+
+#endif
diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h
new file mode 100644
index 000000000000..31bf716106ee
--- /dev/null
+++ b/include/asm-arm/mach/dma.h
@@ -0,0 +1,55 @@
+/*
+ *  linux/include/asm-arm/mach/dma.h
+ *
+ *  Copyright (C) 1998-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This header file describes the interface between the generic DMA handler
+ *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
+ */
+
+struct dma_struct;
+typedef struct dma_struct dma_t;
+
+struct dma_ops {
+	int	(*request)(dmach_t, dma_t *);		/* optional */
+	void	(*free)(dmach_t, dma_t *);		/* optional */
+	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
+	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
+	int	(*residue)(dmach_t, dma_t *);		/* optional */
+	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
+	char	*type;
+};
+
+struct dma_struct {
+	struct scatterlist buf;		/* single DMA			*/
+	int		sgcount;	/* number of DMA SG		*/
+	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
+
+	unsigned int	active:1;	/* Transfer active		*/
+	unsigned int	invalid:1;	/* Address/Count changed	*/
+	unsigned int	using_sg:1;	/* using scatter list?		*/
+	dmamode_t	dma_mode;	/* DMA mode			*/
+	int		speed;		/* DMA speed			*/
+
+	unsigned int	lock;		/* Device is allocated		*/
+	const char	*device_id;	/* Device name			*/
+
+	unsigned int	dma_base;	/* Controller base address	*/
+	int		dma_irq;	/* Controller IRQ		*/
+	struct scatterlist cur_sg;	/* Current controller buffer	*/
+	unsigned int	state;
+
+	struct dma_ops	*d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose  : Initialise architecture specific DMA
+ * Params   : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h
new file mode 100644
index 000000000000..a92887d4b2cb
--- /dev/null
+++ b/include/asm-arm/mach/flash.h
@@ -0,0 +1,34 @@
+/*
+ *  linux/include/asm-arm/mach/flash.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_MACH_FLASH_H
+#define ASMARM_MACH_FLASH_H
+
+struct mtd_partition;
+
+/*
+ * map_name:	the map probe function name
+ * width:	width of mapped device
+ * init:	method called at driver/device initialisation
+ * exit:	method called at driver/device removal
+ * set_vpp:	method called to enable or disable VPP
+ * parts:	optional array of mtd_partitions for static partitioning
+ * nr_parts:	number of mtd_partitions for static partitoning
+ */
+struct flash_platform_data {
+	const char	*map_name;
+	unsigned int	width;
+	int		(*init)(void);
+	void		(*exit)(void);
+	void		(*set_vpp)(int on);
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+#endif
diff --git a/include/asm-arm/mach/irda.h b/include/asm-arm/mach/irda.h
new file mode 100644
index 000000000000..58984d9c0b0b
--- /dev/null
+++ b/include/asm-arm/mach/irda.h
@@ -0,0 +1,20 @@
+/*
+ *  linux/include/asm-arm/mach/irda.h
+ *
+ *  Copyright (C) 2004 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRDA_H
+#define __ASM_ARM_MACH_IRDA_H
+
+struct irda_platform_data {
+	int (*startup)(struct device *);
+	void (*shutdown)(struct device *);
+	int (*set_power)(struct device *, unsigned int state);
+	void (*set_speed)(struct device *, unsigned int speed);
+};
+
+#endif
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
new file mode 100644
index 000000000000..a43a353f6c7b
--- /dev/null
+++ b/include/asm-arm/mach/irq.h
@@ -0,0 +1,127 @@
+/*
+ *  linux/include/asm-arm/mach/irq.h
+ *
+ *  Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+struct irqdesc;
+struct pt_regs;
+struct seq_file;
+
+typedef void (*irq_handler_t)(unsigned int, struct irqdesc *, struct pt_regs *);
+typedef void (*irq_control_t)(unsigned int);
+
+struct irqchip {
+	/*
+	 * Acknowledge the IRQ.
+	 * If this is a level-based IRQ, then it is expected to mask the IRQ
+	 * as well.
+	 */
+	void (*ack)(unsigned int);
+	/*
+	 * Mask the IRQ in hardware.
+	 */
+	void (*mask)(unsigned int);
+	/*
+	 * Unmask the IRQ in hardware.
+	 */
+	void (*unmask)(unsigned int);
+	/*
+	 * Ask the hardware to re-trigger the IRQ.
+	 * Note: This method _must_ _not_ call the interrupt handler.
+	 * If you are unable to retrigger the interrupt, do not
+	 * provide a function, or if you do, return non-zero.
+	 */
+	int (*retrigger)(unsigned int);
+	/*
+	 * Set the type of the IRQ.
+	 */
+	int (*type)(unsigned int, unsigned int);
+	/*
+	 * Set wakeup-enable on the selected IRQ
+	 */
+	int (*wake)(unsigned int, unsigned int);
+
+#ifdef CONFIG_SMP
+	/*
+	 * Route an interrupt to a CPU
+	 */
+	void (*set_cpu)(struct irqdesc *desc, unsigned int irq, unsigned int cpu);
+#endif
+};
+
+struct irqdesc {
+	irq_handler_t	handle;
+	struct irqchip	*chip;
+	struct irqaction *action;
+	struct list_head pend;
+	void		*chipdata;
+	void		*data;
+	unsigned int	disable_depth;
+
+	unsigned int	triggered: 1;		/* IRQ has occurred	      */
+	unsigned int	running  : 1;		/* IRQ is running             */
+	unsigned int	pending  : 1;		/* IRQ is pending	      */
+	unsigned int	probing  : 1;		/* IRQ in use for a probe     */
+	unsigned int	probe_ok : 1;		/* IRQ can be used for probe  */
+	unsigned int	valid    : 1;		/* IRQ claimable	      */
+	unsigned int	noautoenable : 1;	/* don't automatically enable IRQ */
+	unsigned int	unused   :25;
+
+	struct proc_dir_entry *procdir;
+
+#ifdef CONFIG_SMP
+	cpumask_t	affinity;
+	unsigned int	cpu;
+#endif
+
+	/*
+	 * IRQ lock detection
+	 */
+	unsigned int	lck_cnt;
+	unsigned int	lck_pc;
+	unsigned int	lck_jif;
+};
+
+extern struct irqdesc irq_desc[];
+
+/*
+ * This is internal.  Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+void __set_irq_handler(unsigned int irq, irq_handler_t, int);
+
+/*
+ * External stuff.
+ */
+#define set_irq_handler(irq,handler)		__set_irq_handler(irq,handler,0)
+#define set_irq_chained_handler(irq,handler)	__set_irq_handler(irq,handler,1)
+#define set_irq_data(irq,d)			do { irq_desc[irq].data = d; } while (0)
+#define set_irq_chipdata(irq,d)			do { irq_desc[irq].chipdata = d; } while (0)
+#define get_irq_chipdata(irq)			(irq_desc[irq].chipdata)
+
+void set_irq_chip(unsigned int irq, struct irqchip *);
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+/*
+ * Built-in IRQ handlers.
+ */
+void do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void dummy_mask_unmask_irq(unsigned int irq);
+
+#endif
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
new file mode 100644
index 000000000000..9ac47cf8d2e4
--- /dev/null
+++ b/include/asm-arm/mach/map.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/map.h
+ *
+ *  Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+struct map_desc {
+	unsigned long virtual;
+	unsigned long physical;
+	unsigned long length;
+	unsigned int type;
+};
+
+struct meminfo;
+
+#define MT_DEVICE		0
+#define MT_CACHECLEAN		1
+#define MT_MINICLEAN		2
+#define MT_LOW_VECTORS		3
+#define MT_HIGH_VECTORS		4
+#define MT_MEMORY		5
+#define MT_ROM			6
+#define MT_IXP2000_DEVICE	7
+
+extern void create_memmap_holes(struct meminfo *);
+extern void memtable_init(struct meminfo *);
+extern void iotable_init(struct map_desc *, int);
+extern void setup_io_desc(void);
diff --git a/include/asm-arm/mach/mmc.h b/include/asm-arm/mach/mmc.h
new file mode 100644
index 000000000000..1b3555d4b41e
--- /dev/null
+++ b/include/asm-arm/mach/mmc.h
@@ -0,0 +1,15 @@
+/*
+ *  linux/include/asm-arm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/protocol.h>
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+};
+
+#endif
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h
new file mode 100644
index 000000000000..25d540ed0079
--- /dev/null
+++ b/include/asm-arm/mach/pci.h
@@ -0,0 +1,75 @@
+/*
+ *  linux/include/asm-arm/mach/pci.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+	struct list_head buses;
+	int		nr_controllers;
+	int		(*setup)(int nr, struct pci_sys_data *);
+	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	void		(*preinit)(void);
+	void		(*postinit)(void);
+	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
+	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+	struct list_head node;
+	int		busnr;		/* primary bus number			*/
+	unsigned long	mem_offset;	/* bus->cpu memory mapping offset	*/
+	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
+	struct pci_bus	*bus;		/* PCI bus				*/
+	struct resource *resource[3];	/* Primary PCI bus resources		*/
+					/* Bridge swizzling			*/
+	u8		(*swizzle)(struct pci_dev *, u8 *);
+					/* IRQ mapping				*/
+	int		(*map_irq)(struct pci_dev *, u8, u8);
+	struct hw_pci	*hw;
+};
+
+/*
+ * This is the standard PCI-PCI bridge swizzling algorithm.
+ */
+u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
+
+/*
+ * Call this with your hw_pci struct to initialise the PCI system.
+ */
+void pci_common_init(struct hw_pci *);
+
+/*
+ * PCI controllers
+ */
+extern int iop321_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *);
+extern void iop321_init(void);
+
+extern int iop331_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *);
+extern void iop331_init(void);
+
+extern int dc21285_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
+extern void dc21285_preinit(void);
+extern void dc21285_postinit(void);
+
+extern int via82c505_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
+extern void via82c505_init(void *sysdata);
+
+extern int pci_v3_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
+extern void pci_v3_preinit(void);
+extern void pci_v3_postinit(void);
diff --git a/include/asm-arm/mach/serial_sa1100.h b/include/asm-arm/mach/serial_sa1100.h
new file mode 100644
index 000000000000..9162018585df
--- /dev/null
+++ b/include/asm-arm/mach/serial_sa1100.h
@@ -0,0 +1,32 @@
+/*
+ *  linux/include/asm-arm/mach/serial_sa1100.h
+ *
+ *  Author: Nicolas Pitre
+ *
+ * Moved to include/asm-arm/mach and changed lots, Russell King
+ *
+ * Low level machine dependent UART functions.
+ */
+#include <linux/config.h>
+
+struct uart_port;
+struct uart_info;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct sa1100_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+};
+
+#ifdef CONFIG_SERIAL_SA1100
+void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
+void sa1100_register_uart(int idx, int port);
+#else
+#define sa1100_register_uart_fns(fns) do { } while (0)
+#define sa1100_register_uart(idx,port) do { } while (0)
+#endif
diff --git a/include/asm-arm/mach/sharpsl_param.h b/include/asm-arm/mach/sharpsl_param.h
new file mode 100644
index 000000000000..7a24ecf04220
--- /dev/null
+++ b/include/asm-arm/mach/sharpsl_param.h
@@ -0,0 +1,37 @@
+/*
+ * Hardware parameter area specific to Sharp SL series devices
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct sharpsl_param_info {
+  unsigned int comadj_keyword;
+  unsigned int comadj;
+
+  unsigned int uuid_keyword;
+  unsigned char uuid[16];
+
+  unsigned int touch_keyword;
+  unsigned int touch_xp;
+  unsigned int touch_yp;
+  unsigned int touch_xd;
+  unsigned int touch_yd;
+
+  unsigned int adadj_keyword;
+  unsigned int adadj;
+
+  unsigned int phad_keyword;
+  unsigned int phadadj;
+} __attribute__((packed));
+
+
+extern struct sharpsl_param_info sharpsl_param;
+extern void sharpsl_save_param(void);
+
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
new file mode 100644
index 000000000000..5cf4fd659fd5
--- /dev/null
+++ b/include/asm-arm/mach/time.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/mach/time.h
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_TIME_H
+#define __ASM_ARM_MACH_TIME_H
+
+#include <linux/sysdev.h>
+
+/*
+ * This is our kernel timer structure.
+ *
+ * - init
+ *   Initialise the kernels jiffy timer source, claim interrupt
+ *   using setup_irq.  This is called early on during initialisation
+ *   while interrupts are still disabled on the local CPU.
+ * - suspend
+ *   Suspend the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled, after all normal devices
+ *   have been suspended.  If no action is required, set this to
+ *   NULL.
+ * - resume
+ *   Resume the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled before any normal devices
+ *   are resumed.  If no action is required, set this to NULL.
+ * - offset
+ *   Return the timer offset in microseconds since the last timer
+ *   interrupt.  Note: this must take account of any unprocessed
+ *   timer interrupt which may be pending.
+ */
+struct sys_timer {
+	struct sys_device	dev;
+	void			(*init)(void);
+	void			(*suspend)(void);
+	void			(*resume)(void);
+	unsigned long		(*offset)(void);
+};
+
+extern struct sys_timer *system_timer;
+extern void timer_tick(struct pt_regs *);
+
+/*
+ * Kernel time keeping support.
+ */
+extern int (*set_rtc)(void);
+extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
+extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
+
+#endif
diff --git a/include/asm-arm/mc146818rtc.h b/include/asm-arm/mc146818rtc.h
new file mode 100644
index 000000000000..7b81e0c42543
--- /dev/null
+++ b/include/asm-arm/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/arch/irqs.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
new file mode 100644
index 000000000000..e47bea7d1723
--- /dev/null
+++ b/include/asm-arm/memory.h
@@ -0,0 +1,200 @@
+/*
+ *  linux/include/asm-arm/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/arch/memory.h>
+
+#ifndef TASK_SIZE
+/*
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define TASK_SIZE		(0xbf000000UL)
+#define TASK_UNMAPPED_BASE	(0x40000000UL)
+#endif
+
+/*
+ * The maximum size of a 26-bit user space task.
+ */
+#define TASK_SIZE_26		(0x04000000UL)
+
+/*
+ * Page offset: 3GB
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(0xc0000000UL)
+#endif
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULE_END	(PAGE_OFFSET)
+#define MODULE_START	(MODULE_END - 16*1048576)
+
+#if TASK_SIZE > MODULE_START
+#error Top of user space clashes with start of module space
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The DMA mask corresponding to the maximum bus address allocatable
+ * using GFP_DMA.  The default here places no restriction on DMA
+ * allocations.  This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(0xffffffffULL)
+#endif
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(node,size,holes) do { } while (0)
+#endif
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)(__phys_to_virt((unsigned long)(x)));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *deprecated* (and that doesn't mean
+ * use the __ prefixed forms instead.)  See dma-mapping.h.
+ */
+static inline __deprecated unsigned long virt_to_bus(void *x)
+{
+	return __virt_to_bus((unsigned long)x);
+}
+
+static inline __deprecated void *bus_to_virt(unsigned long x)
+{
+	return (void *)__bus_to_virt(x);
+}
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#ifndef CONFIG_DISCONTIGMEM
+
+#define page_to_pfn(page)	(((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_to_page(pfn)	((mem_map + (pfn)) - PHYS_PFN_OFFSET)
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+
+#define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#define PHYS_TO_NID(addr)	(0)
+
+#else /* CONFIG_DISCONTIGMEM */
+
+/*
+ * This is more complex.  We have a set of mem_map arrays spread
+ * around in memory.
+ */
+#include <linux/numa.h>
+
+#define page_to_pfn(page)					\
+	(( (page) - page_zone(page)->zone_mem_map)		\
+	  + page_zone(page)->zone_start_pfn)
+#define pfn_to_page(pfn)					\
+	(PFN_TO_MAPBASE(pfn) + LOCAL_MAP_NR((pfn) << PAGE_SHIFT))
+#define pfn_valid(pfn)		(PFN_TO_NID(pfn) < MAX_NUMNODES)
+
+#define virt_to_page(kaddr)					\
+	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
+
+/*
+ * Common discontigmem stuff.
+ *  PHYS_TO_NID is used by the ARM kernel/setup.c
+ */
+#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/*
+ * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Optional device DMA address remapping. Do _not_ use directly!
+ * We should really eliminate virt_to_bus() here - it's deprecated.
+ */
+#ifndef __arch_page_to_dma
+#define page_to_dma(dev, page)		((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
+#define dma_to_virt(dev, addr)		((void *)__bus_to_virt(addr))
+#define virt_to_dma(dev, addr)		((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
+#else
+#define page_to_dma(dev, page)		(__arch_page_to_dma(dev, page))
+#define dma_to_virt(dev, addr)		(__arch_dma_to_virt(dev, addr))
+#define virt_to_dma(dev, addr)		(__arch_virt_to_dma(dev, addr))
+#endif
+
+#endif
+
+#endif
diff --git a/include/asm-arm/mman.h b/include/asm-arm/mman.h
new file mode 100644
index 000000000000..8e4f69c4fa5f
--- /dev/null
+++ b/include/asm-arm/mman.h
@@ -0,0 +1,43 @@
+#ifndef __ARM_MMAN_H__
+#define __ARM_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __ARM_MMAN_H__ */
diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h
new file mode 100644
index 000000000000..a457cb71984f
--- /dev/null
+++ b/include/asm-arm/mmu.h
@@ -0,0 +1,16 @@
+#ifndef __ARM_MMU_H
+#define __ARM_MMU_H
+
+typedef struct {
+#if __LINUX_ARM_ARCH__ >= 6
+	unsigned int id;
+#endif
+} mm_context_t;
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define ASID(mm)	((mm)->context.id & 255)
+#else
+#define ASID(mm)	(0)
+#endif
+
+#endif
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
new file mode 100644
index 000000000000..4af9c411c617
--- /dev/null
+++ b/include/asm-arm/mmu_context.h
@@ -0,0 +1,96 @@
+/*
+ *  linux/include/asm-arm/mmu_context.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#include <asm/proc-fns.h>
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/*
+ * On ARMv6, we have the following structure in the Context ID:
+ *
+ * 31                         7          0
+ * +-------------------------+-----------+
+ * |      process ID         |   ASID    |
+ * +-------------------------+-----------+
+ * |              context ID             |
+ * +-------------------------------------+
+ *
+ * The ASID is used to tag entries in the CPU caches and TLBs.
+ * The context ID is used by debuggers and trace logic, and
+ * should be unique within all running processes.
+ */
+#define ASID_BITS	8
+#define ASID_MASK	((~0) << ASID_BITS)
+
+extern unsigned int cpu_last_asid;
+
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void __new_context(struct mm_struct *mm);
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		__new_context(mm);
+}
+
+#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
+
+#else
+
+#define check_context(mm)		do { } while (0)
+#define init_new_context(tsk,mm)	0
+
+#endif
+
+#define destroy_context(mm)		do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (prev != next) {
+		cpu_set(cpu, next->cpu_vm_mask);
+		check_context(next);
+		cpu_switch_mm(next->pgd, next);
+		cpu_clear(cpu, prev->cpu_vm_mask);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
+
+#endif
diff --git a/include/asm-arm/mmzone.h b/include/asm-arm/mmzone.h
new file mode 100644
index 000000000000..b87de151f0a4
--- /dev/null
+++ b/include/asm-arm/mmzone.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/include/asm-arm/mmzone.h
+ *
+ *  1999-12-29	Nicolas Pitre		Created
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+/*
+ * Currently defined in arch/arm/mm/discontig.c
+ */
+extern pg_data_t discontig_node_data[];
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(&discontig_node_data[nid])
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#include <asm/arch/memory.h>
+
+#endif
diff --git a/include/asm-arm/module.h b/include/asm-arm/module.h
new file mode 100644
index 000000000000..24b168dc31a3
--- /dev/null
+++ b/include/asm-arm/module.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_ARM_MODULE_H
+#define _ASM_ARM_MODULE_H
+
+struct mod_arch_specific
+{
+	int foo;
+};
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+/*
+ * Include the ARM architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC	"ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+#endif /* _ASM_ARM_MODULE_H */
diff --git a/include/asm-arm/msgbuf.h b/include/asm-arm/msgbuf.h
new file mode 100644
index 000000000000..33b35b946eaa
--- /dev/null
+++ b/include/asm-arm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASMARM_MSGBUF_H
+#define _ASMARM_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASMARM_MSGBUF_H */
diff --git a/include/asm-arm/namei.h b/include/asm-arm/namei.h
new file mode 100644
index 000000000000..a402d3b9d0f7
--- /dev/null
+++ b/include/asm-arm/namei.h
@@ -0,0 +1,25 @@
+/* 
+ * linux/include/asm-arm/namei.h
+ *
+ * Routines to handle famous /usr/gnemul
+ * Derived from the Sparc version of this file
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ASMARM_NAMEI_H
+#define __ASMARM_NAMEI_H
+
+#define ARM_BSD_EMUL "usr/gnemul/bsd/"
+
+static inline char *__emul_prefix(void)
+{
+	switch (current->personality) {
+	case PER_BSD:
+		return ARM_BSD_EMUL;
+	default:
+		return NULL;
+	}
+}
+
+#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm/numnodes.h b/include/asm-arm/numnodes.h
new file mode 100644
index 000000000000..5d2a1034a02e
--- /dev/null
+++ b/include/asm-arm/numnodes.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/numnodes.h
+ *
+ *  Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* This declaration for the size of the NUMA (CONFIG_DISCONTIGMEM)
+ * memory node table is the default.
+ *
+ * A good place to override this value is include/asm/arch/memory.h.
+ */
+
+#ifndef __ASM_ARM_NUMNODES_H
+#define __ASM_ARM_NUMNODES_H
+
+#ifndef NODES_SHIFT
+# define NODES_SHIFT	2	/* Normally, Max 4 Nodes */
+#endif
+
+#endif
diff --git a/include/asm-arm/nwflash.h b/include/asm-arm/nwflash.h
new file mode 100644
index 000000000000..04e5a557a884
--- /dev/null
+++ b/include/asm-arm/nwflash.h
@@ -0,0 +1,9 @@
+#ifndef _FLASH_H
+#define _FLASH_H
+
+#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
+#define CMD_WRITE_DISABLE	 0
+#define CMD_WRITE_ENABLE	 0x28
+#define CMD_WRITE_BASE64K_ENABLE 0x47
+
+#endif /* _FLASH_H */
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
new file mode 100644
index 000000000000..4ca3a8e9348f
--- /dev/null
+++ b/include/asm-arm/page.h
@@ -0,0 +1,197 @@
+/*
+ *  linux/include/asm-arm/page.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/glue.h>
+
+/*
+ *	User Space Model
+ *	================
+ *
+ *	This section selects the correct set of functions for dealing with
+ *	page-based copying and clearing for user space for the particular
+ *	processor(s) we're building for.
+ *
+ *	We have the following to choose from:
+ *	  v3		- ARMv3
+ *	  v4wt		- ARMv4 with writethrough cache, without minicache
+ *	  v4wb		- ARMv4 with writeback cache, without minicache
+ *	  v4_mc		- ARMv4 with minicache
+ *	  xscale	- Xscale
+ */
+#undef _USER
+#undef MULTI_USER
+
+#ifdef CONFIG_CPU_COPY_V3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WT
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wt
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WB
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wb
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xscale_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V6
+# define MULTI_USER 1
+#endif
+
+#if !defined(_USER) && !defined(MULTI_USER)
+#error Unknown user operations model
+#endif
+
+struct cpu_user_fns {
+	void (*cpu_clear_user_page)(void *p, unsigned long user);
+	void (*cpu_copy_user_page)(void *to, const void *from,
+				   unsigned long user);
+};
+
+#ifdef MULTI_USER
+extern struct cpu_user_fns cpu_user;
+
+#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
+#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
+
+#else
+
+#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
+#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
+
+extern void __cpu_clear_user_page(void *p, unsigned long user);
+extern void __cpu_copy_user_page(void *to, const void *from,
+				 unsigned long user);
+#endif
+
+#define clear_user_page(addr,vaddr,pg)			\
+	do {						\
+		preempt_disable();			\
+		__cpu_clear_user_page(addr, vaddr);	\
+		preempt_enable();			\
+	} while (0)
+
+#define copy_user_page(to,from,vaddr,pg)		\
+	do {						\
+		preempt_disable();			\
+		__cpu_copy_user_page(to, from, vaddr);	\
+		preempt_enable();			\
+	} while (0)
+
+#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd[2]; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd[0])
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h
new file mode 100644
index 000000000000..94223d4d7e88
--- /dev/null
+++ b/include/asm-arm/param.h
@@ -0,0 +1,36 @@
+/*
+ *  linux/include/asm-arm/param.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifdef __KERNEL__
+# include <asm/arch/param.h>		/* for kernel version of HZ */
+
+# ifndef HZ
+#  define HZ		100		/* Internal kernel timer frequency */
+# endif
+
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#else
+# define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN  64
+
+#endif
+
diff --git a/include/asm-arm/parport.h b/include/asm-arm/parport.h
new file mode 100644
index 000000000000..f2f90c76ddd1
--- /dev/null
+++ b/include/asm-arm/parport.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
+ *
+ *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
new file mode 100644
index 000000000000..40ffaefbeb1a
--- /dev/null
+++ b/include/asm-arm/pci.h
@@ -0,0 +1,59 @@
+#ifndef ASMARM_PCI_H
+#define ASMARM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <asm-generic/pci-dma-compat.h>
+
+#include <asm/hardware.h> /* for PCIBIOS_MIN_* */
+
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (0)
+
+/*
+ * We don't support DAC DMA cycles.
+ */
+#define pci_dac_dma_supported(pci_dev, mask)	(0)
+
+/*
+ * Whether pci_unmap_{single,page} is a nop depends upon the
+ * configuration.
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state, int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+ 
+#endif
diff --git a/include/asm-arm/percpu.h b/include/asm-arm/percpu.h
new file mode 100644
index 000000000000..b4e32d8ec072
--- /dev/null
+++ b/include/asm-arm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_PERCPU
+#define __ARM_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif
diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h
new file mode 100644
index 000000000000..e814f8144f8b
--- /dev/null
+++ b/include/asm-arm/pgalloc.h
@@ -0,0 +1,130 @@
+/*
+ *  linux/include/asm-arm/pgalloc.h
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ */
+#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(pmd)			do { } while (0)
+#define pgd_populate(mm,pmd,pte)	BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(pgd)			free_pgd_slow(pgd)
+
+#define check_pgt_cache()		do { } while (0)
+
+/*
+ * Allocate one PTE table.
+ *
+ * This actually allocates two hardware PTE tables, but we wrap this up
+ * into one table thus:
+ *
+ *  +------------+
+ *  |  h/w pt 0  |
+ *  +------------+
+ *  |  h/w pt 1  |
+ *  +------------+
+ *  | Linux pt 0 |
+ *  +------------+
+ *  | Linux pt 1 |
+ *  +------------+
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (pte) {
+		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
+		pte += PTRS_PER_PTE;
+	}
+
+	return pte;
+}
+
+static inline struct page *
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	if (pte) {
+		void *page = page_address(pte);
+		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+	}
+
+	return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(pte_t *pte)
+{
+	if (pte) {
+		pte -= PTRS_PER_PTE;
+		free_page((unsigned long)pte);
+	}
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ *
+ * Ensure that we always set both PMD entries.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long pte_ptr = (unsigned long)ptep;
+	unsigned long pmdval;
+
+	BUG_ON(mm != &init_mm);
+
+	/*
+	 * The pmd must be loaded with the physical
+	 * address of the PTE table
+	 */
+	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
+	pmdval = __pa(pte_ptr) | _PAGE_KERNEL_TABLE;
+	pmdp[0] = __pmd(pmdval);
+	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+	flush_pmd_entry(pmdp);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep)
+{
+	unsigned long pmdval;
+
+	BUG_ON(mm == &init_mm);
+
+	pmdval = page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE;
+	pmdp[0] = __pmd(pmdval);
+	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+	flush_pmd_entry(pmdp);
+}
+
+#endif
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
new file mode 100644
index 000000000000..91ffb1f4cd10
--- /dev/null
+++ b/include/asm-arm/pgtable.h
@@ -0,0 +1,433 @@
+/*
+ *  linux/include/asm-arm/pgtable.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/memory.h>
+#include <asm/proc-fns.h>
+#include <asm/arch/vmalloc.h>
+
+/*
+ * Hardware-wise, we have a two level page table structure, where the first
+ * level has 4096 entries, and the second level has 256 entries.  Each entry
+ * is one 32-bit word.  Most of the bits in the second level entry are used
+ * by hardware, and there aren't any "accessed" and "dirty" bits.
+ *
+ * Linux on the other hand has a three level page table structure, which can
+ * be wrapped to fit a two level page table structure easily - using the PGD
+ * and PTE only.  However, Linux also expects one "PTE" table per page, and
+ * at least a "dirty" bit.
+ *
+ * Therefore, we tweak the implementation slightly - we tell Linux that we
+ * have 2048 entries in the first level, each of which is 8 bytes (iow, two
+ * hardware pointers to the second level.)  The second level contains two
+ * hardware PTE tables arranged contiguously, followed by Linux versions
+ * which contain the state information Linux needs.  We, therefore, end up
+ * with 512 entries in the "PTE" level.
+ *
+ * This leads to the page tables having the following layout:
+ *
+ *    pgd             pte
+ * |        |
+ * +--------+ +0
+ * |        |-----> +------------+ +0
+ * +- - - - + +4    |  h/w pt 0  |
+ * |        |-----> +------------+ +1024
+ * +--------+ +8    |  h/w pt 1  |
+ * |        |       +------------+ +2048
+ * +- - - - +       | Linux pt 0 |
+ * |        |       +------------+ +3072
+ * +--------+       | Linux pt 1 |
+ * |        |       +------------+ +4096
+ *
+ * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
+ * PTE_xxx for definitions of bits appearing in the "h/w pt".
+ *
+ * PMD_xxx definitions refer to bits in the first level page table.
+ *
+ * The "dirty" bit is emulated by only granting hardware write permission
+ * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
+ * means that a write to a clean page will cause a permission fault, and
+ * the Linux MM layer will mark the page dirty via handle_pte_fault().
+ * For the hardware to notice the permission change, the TLB entry must
+ * be flushed, and ptep_establish() does that for us.
+ *
+ * The "accessed" or "young" bit is emulated by a similar method; we only
+ * allow accesses to the page if the "young" bit is set.  Accesses to the
+ * page will cause a fault, and handle_pte_fault() will set the young bit
+ * for us as long as the page is marked present in the corresponding Linux
+ * PTE entry.  Again, ptep_establish() will ensure that the TLB is up to
+ * date.
+ *
+ * However, when the "young" bit is cleared, we deny access to the page
+ * by clearing the hardware PTE.  Currently Linux does not flush the TLB
+ * for us in this case, which means the TLB will retain the transation
+ * until either the TLB entry is evicted under pressure, or a context
+ * switch which changes the user space mapping occurs.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		1
+#define PTRS_PER_PGD		2048
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PMD_SHIFT		21
+#define PGDIR_SHIFT		21
+
+#define LIBRARY_TEXT_START	0x0c000000
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+#define FIRST_USER_PGD_NR	1
+#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * ARMv6 supersection address mask and size definitions.
+ */
+#define SUPERSECTION_SHIFT	24
+#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
+#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1 descriptor (PMD)
+ *   - common
+ */
+#define PMD_TYPE_MASK		(3 << 0)
+#define PMD_TYPE_FAULT		(0 << 0)
+#define PMD_TYPE_TABLE		(1 << 0)
+#define PMD_TYPE_SECT		(2 << 0)
+#define PMD_BIT4		(1 << 4)
+#define PMD_DOMAIN(x)		((x) << 5)
+#define PMD_PROTECTION		(1 << 9)	/* v5 */
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE	(1 << 2)
+#define PMD_SECT_CACHEABLE	(1 << 3)
+#define PMD_SECT_AP_WRITE	(1 << 10)
+#define PMD_SECT_AP_READ	(1 << 11)
+#define PMD_SECT_TEX(x)		((x) << 12)	/* v5 */
+#define PMD_SECT_APX		(1 << 15)	/* v6 */
+#define PMD_SECT_S		(1 << 16)	/* v6 */
+#define PMD_SECT_nG		(1 << 17)	/* v6 */
+#define PMD_SECT_SUPER		(1 << 18)	/* v6 */
+
+#define PMD_SECT_UNCACHED	(0)
+#define PMD_SECT_BUFFERED	(PMD_SECT_BUFFERABLE)
+#define PMD_SECT_WT		(PMD_SECT_CACHEABLE)
+#define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
+#define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+
+/*
+ *   - coarse table (not used)
+ */
+
+/*
+ * + Level 2 descriptor (PTE)
+ *   - common
+ */
+#define PTE_TYPE_MASK		(3 << 0)
+#define PTE_TYPE_FAULT		(0 << 0)
+#define PTE_TYPE_LARGE		(1 << 0)
+#define PTE_TYPE_SMALL		(2 << 0)
+#define PTE_TYPE_EXT		(3 << 0)	/* v5 */
+#define PTE_BUFFERABLE		(1 << 2)
+#define PTE_CACHEABLE		(1 << 3)
+
+/*
+ *   - extended small page/tiny page
+ */
+#define PTE_EXT_AP_MASK		(3 << 4)
+#define PTE_EXT_AP_UNO_SRO	(0 << 4)
+#define PTE_EXT_AP_UNO_SRW	(1 << 4)
+#define PTE_EXT_AP_URO_SRW	(2 << 4)
+#define PTE_EXT_AP_URW_SRW	(3 << 4)
+#define PTE_EXT_TEX(x)		((x) << 6)	/* v5 */
+
+/*
+ *   - small page
+ */
+#define PTE_SMALL_AP_MASK	(0xff << 4)
+#define PTE_SMALL_AP_UNO_SRO	(0x00 << 4)
+#define PTE_SMALL_AP_UNO_SRW	(0x55 << 4)
+#define PTE_SMALL_AP_URO_SRW	(0xaa << 4)
+#define PTE_SMALL_AP_URW_SRW	(0xff << 4)
+
+/*
+ * "Linux" PTE definitions.
+ *
+ * We keep two sets of PTEs - the hardware and the linux version.
+ * This allows greater flexibility in the way we map the Linux bits
+ * onto the hardware tables, and allows us to have YOUNG and DIRTY
+ * bits.
+ *
+ * The PTE table pointer refers to the hardware entries; the "Linux"
+ * entries are stored 1024 bytes below.
+ */
+#define L_PTE_PRESENT		(1 << 0)
+#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
+#define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
+#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
+#define L_PTE_USER		(1 << 4)
+#define L_PTE_WRITE		(1 << 5)
+#define L_PTE_EXEC		(1 << 6)
+#define L_PTE_DIRTY		(1 << 7)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/domain.h>
+
+#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
+#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+
+/*
+ * The following macros handle the cache and bufferable bits...
+ */
+#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
+#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
+
+extern pgprot_t		pgprot_kernel;
+
+#define PAGE_NONE       __pgprot(_L_PTE_DEFAULT)
+#define PAGE_COPY       __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define PAGE_SHARED     __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define PAGE_READONLY   __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define PAGE_KERNEL	pgprot_kernel
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on most ARM hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_READONLY
+#define __P101  PAGE_READONLY
+#define __P110  PAGE_COPY
+#define __P111  PAGE_COPY
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_READONLY
+#define __S101  PAGE_READONLY
+#define __S110  PAGE_SHARED
+#define __S111  PAGE_SHARED
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte_at((mm),(addr),(ptep), __pte(0))
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir,addr)	(pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_offset_map(dir,addr)	(pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#define set_pte(ptep, pte)	cpu_set_pte(ptep,pte)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_read(pte)		(pte_val(pte) & L_PTE_USER)
+#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
+#define pte_exec(pte)		(pte_val(pte) & L_PTE_EXEC)
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+/*PTE_BIT_FUNC(rdprotect, &= ~L_PTE_USER);*/
+/*PTE_BIT_FUNC(mkread,    |= L_PTE_USER);*/
+PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
+PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
+PTE_BIT_FUNC(exprotect, &= ~L_PTE_EXEC);
+PTE_BIT_FUNC(mkexec,    |= L_PTE_EXEC);
+PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+static inline pte_t *pmd_page_kernel(pmd_t pmd)
+{
+	unsigned long ptr;
+
+	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
+	ptr += PTRS_PER_PTE * sizeof(void *);
+
+	return __va(ptr);
+}
+
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+
+/*
+ * Permanent address of a page. We never have highmem, so this is trivial.
+ */
+#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
+
+#define page_pte_prot(page,prot)	mk_pte(page, prot)
+#define page_pte(page)		mk_pte(page, __pgprot(0))
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr)	((pmd_t *)(dir))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __swp_offset(x)		((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * remap a physical address `phys' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_page_range(vma,from,phys,size,prot) \
+		remap_pfn_range(vma, from, (phys) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/poll.h b/include/asm-arm/poll.h
new file mode 100644
index 000000000000..2744ca831f5d
--- /dev/null
+++ b/include/asm-arm/poll.h
@@ -0,0 +1,26 @@
+#ifndef __ASMARM_POLL_H
+#define __ASMARM_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h
new file mode 100644
index 000000000000..e142a2a016ca
--- /dev/null
+++ b/include/asm-arm/posix_types.h
@@ -0,0 +1,81 @@
+/*
+ *  linux/include/asm-arm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+typedef unsigned short		__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
new file mode 100644
index 000000000000..7bef2bf6be51
--- /dev/null
+++ b/include/asm-arm/proc-fns.h
@@ -0,0 +1,174 @@
+/*
+ *  linux/include/asm-arm/proc-fns.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCFNS_H
+#define __ASM_PROCFNS_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_32
+# ifdef CONFIG_CPU_ARM610
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm6
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM710
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm7
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM720T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm720
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM920T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm920
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM922T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm922
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM925T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm925
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM926T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm926
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA110
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa110
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA1100
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa1100
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020E
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020e
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1022
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1022
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1026
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1026
+#  endif
+# endif
+# ifdef CONFIG_CPU_XSCALE
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xscale
+#  endif
+# endif
+# ifdef CONFIG_CPU_V6
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_v6
+#  endif
+# endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifndef MULTI_CPU
+#include "asm/cpu-single.h"
+#else
+#include "asm/cpu-multi32.h"
+#endif
+
+#include <asm/memory.h>
+
+#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+
+#define cpu_get_pgd()	\
+	({						\
+		unsigned long pg;			\
+		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
+			 : "=r" (pg) : : "cc");		\
+		pg &= ~0x3fff;				\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_PROCFNS_H */
diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h
new file mode 100644
index 000000000000..4a9845997a75
--- /dev/null
+++ b/include/asm-arm/processor.h
@@ -0,0 +1,118 @@
+/*
+ *  linux/include/asm-arm/processor.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/procinfo.h>
+#include <asm/types.h>
+
+#define KERNEL_STACK_SIZE	PAGE_SIZE
+
+union debug_insn {
+	u32	arm;
+	u16	thumb;
+};
+
+struct debug_entry {
+	u32			address;
+	union debug_insn	insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long		address;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+							/* debugging	  */
+	struct debug_info	debug;
+};
+
+#define INIT_THREAD  {	}
+
+#define start_thread(regs,pc,sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	set_fs(USER_DS);						\
+	memzero(regs->uregs, sizeof(regs->uregs));			\
+	if (current->personality & ADDR_LIMIT_32BIT)			\
+		regs->ARM_cpsr = USR_MODE;				\
+	else								\
+		regs->ARM_cpsr = USR26_MODE;				\
+	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
+		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_pc = pc & ~1;		/* pc */			\
+	regs->ARM_sp = sp;		/* sp */			\
+	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
+	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
+	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define KSTK_EIP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)->thread_info))[1019])
+#define KSTK_ESP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)->thread_info))[1017])
+
+/*
+ * Prefetching support - only ARMv5.
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+
+#define ARCH_HAS_PREFETCH
+#define prefetch(ptr)				\
+	({					\
+		__asm__ __volatile__(		\
+		"pld\t%0"			\
+		:				\
+		: "o" (*(char *)(ptr))		\
+		: "cc");			\
+	})
+
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(ptr)	prefetch(ptr)
+
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) do { } while (0)
+
+#endif
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
new file mode 100644
index 000000000000..a9c75b2c314f
--- /dev/null
+++ b/include/asm-arm/procinfo.h
@@ -0,0 +1,60 @@
+/*
+ *  linux/include/asm-arm/procinfo.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#ifndef __ASSEMBLY__
+
+struct cpu_tlb_fns;
+struct cpu_user_fns;
+struct cpu_cache_fns;
+struct processor;
+
+/*
+ * Note!  struct processor is always defined if we're
+ * using MULTI_CPU, otherwise this entry is unused,
+ * but still exists.
+ *
+ * NOTE! The following structure is defined by assembly
+ * language, NOT C code.  For more information, check:
+ *  arch/arm/mm/proc-*.S and arch/arm/kernel/head.S
+ */
+struct proc_info_list {
+	unsigned int		cpu_val;
+	unsigned int		cpu_mask;
+	unsigned long		__cpu_mmu_flags;	/* used by head.S */
+	unsigned long		__cpu_flush;		/* used by head.S */
+	const char		*arch_name;
+	const char		*elf_name;
+	unsigned int		elf_hwcap;
+	const char		*cpu_name;
+	struct processor	*proc;
+	struct cpu_tlb_fns	*tlb;
+	struct cpu_user_fns	*user;
+	struct cpu_cache_fns	*cache;
+};
+
+extern unsigned int elf_hwcap;
+
+#endif	/* __ASSEMBLY__ */
+
+#define PROC_INFO_SZ	48
+
+#define HWCAP_SWP	1
+#define HWCAP_HALF	2
+#define HWCAP_THUMB	4
+#define HWCAP_26BIT	8	/* Play it safe */
+#define HWCAP_FAST_MULT	16
+#define HWCAP_FPA	32
+#define HWCAP_VFP	64
+#define HWCAP_EDSP	128
+#define HWCAP_JAVA	256
+
+#endif
diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h
new file mode 100644
index 000000000000..604e3a186cf9
--- /dev/null
+++ b/include/asm-arm/ptrace.h
@@ -0,0 +1,155 @@
+/*
+ *  linux/include/asm-arm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#include <linux/config.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#define PTRACE_GET_THREAD_AREA	22
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+#define PCMASK		0
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long uregs[18];
+};
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(((regs)->ARM_cpsr & 0xf) == 0)
+
+#ifdef CONFIG_ARM_THUMB
+#define thumb_mode(regs) \
+	(((regs)->ARM_cpsr & PSR_T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define processor_mode(regs) \
+	((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_F_BIT))
+
+#define condition_codes(regs) \
+	((regs)->ARM_cpsr & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT))
+	
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if (user_mode(regs) &&
+	    (regs->ARM_cpsr & (PSR_F_BIT|PSR_I_BIT)) == 0)
+		return 1;
+
+	/*
+	 * Force CPSR to something logical...
+	 */
+	regs->ARM_cpsr &= PSR_f | PSR_s | PSR_x | PSR_T_BIT | MODE32_BIT;
+
+	return 0;
+}
+
+#endif	/* __KERNEL__ */
+
+#define pc_pointer(v) \
+	((v) & ~PCMASK)
+
+#define instruction_pointer(regs) \
+	(pc_pointer((regs)->ARM_pc))
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#ifdef __KERNEL__
+extern void show_regs(struct pt_regs *);
+
+#define predicate(x)	(x & 0xf0000000)
+#define PREDICATE_ALWAYS	0xe0000000
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/include/asm-arm/resource.h b/include/asm-arm/resource.h
new file mode 100644
index 000000000000..734b581b5b6a
--- /dev/null
+++ b/include/asm-arm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_RESOURCE_H
+#define _ARM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-arm/rtc.h b/include/asm-arm/rtc.h
new file mode 100644
index 000000000000..aa7e16b2e225
--- /dev/null
+++ b/include/asm-arm/rtc.h
@@ -0,0 +1,46 @@
+/*
+ *  linux/include/asm-arm/rtc.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_RTC_H
+#define ASMARM_RTC_H
+
+struct module;
+
+struct rtc_ops {
+	struct module	*owner;
+	int		(*open)(void);
+	void		(*release)(void);
+	int		(*ioctl)(unsigned int, unsigned long);
+
+	void		(*read_time)(struct rtc_time *);
+	int		(*set_time)(struct rtc_time *);
+	void		(*read_alarm)(struct rtc_wkalrm *);
+	int		(*set_alarm)(struct rtc_wkalrm *);
+	int		(*proc)(char *buf);
+};
+
+void rtc_time_to_tm(unsigned long, struct rtc_time *);
+int rtc_tm_to_time(struct rtc_time *, unsigned long *);
+int rtc_valid_tm(struct rtc_time *);
+void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
+void rtc_update(unsigned long, unsigned long);
+int register_rtc(struct rtc_ops *);
+void unregister_rtc(struct rtc_ops *);
+
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
+	return  (tm->tm_year == -1) ||
+		((unsigned)tm->tm_mon >= 12) ||
+		((unsigned)(tm->tm_mday - 1) >= 31) ||
+		((unsigned)tm->tm_hour > 23) ||
+		((unsigned)tm->tm_min > 59) ||
+		((unsigned)tm->tm_sec > 59);
+}
+
+#endif
diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h
new file mode 100644
index 000000000000..83b876fb04cc
--- /dev/null
+++ b/include/asm-arm/scatterlist.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SCATTERLIST_H
+#define _ASMARM_SCATTERLIST_H
+
+#include <asm/memory.h>
+#include <asm/types.h>
+
+struct scatterlist {
+	struct page	*page;		/* buffer page			 */
+	unsigned int	offset;		/* buffer offset		 */
+	dma_addr_t	dma_address;	/* dma address			 */
+	unsigned int	length;		/* length			 */
+	char		*__address;	/* for set_dma_addr		 */
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/include/asm-arm/sections.h b/include/asm-arm/sections.h
new file mode 100644
index 000000000000..2b8c5160388f
--- /dev/null
+++ b/include/asm-arm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/include/asm-arm/segment.h b/include/asm-arm/segment.h
new file mode 100644
index 000000000000..9e24c21f6304
--- /dev/null
+++ b/include/asm-arm/segment.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARM_SEGMENT_H
+#define __ASM_ARM_SEGMENT_H
+
+#define __KERNEL_CS   0x0
+#define __KERNEL_DS   0x0
+
+#define __USER_CS     0x1
+#define __USER_DS     0x1
+
+#endif /* __ASM_ARM_SEGMENT_H */
+
diff --git a/include/asm-arm/semaphore-helper.h b/include/asm-arm/semaphore-helper.h
new file mode 100644
index 000000000000..1d7f1987edb9
--- /dev/null
+++ b/include/asm-arm/semaphore-helper.h
@@ -0,0 +1,84 @@
+#ifndef ASMARM_SEMAPHORE_HELPER_H
+#define ASMARM_SEMAPHORE_HELPER_H
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (atomic_read(&sem->count) <= 0)
+		sem->waking++;
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking non zero interruptible
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;	
+}
+
+/*
+ * waking_non_zero_try_lock:
+ *	1	failed to lock
+ *	0	got the lock
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 1;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->waking--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
new file mode 100644
index 000000000000..60f33e6eb800
--- /dev/null
+++ b/include/asm-arm/semaphore.h
@@ -0,0 +1,106 @@
+/*
+ * linux/include/asm-arm/semaphore.h
+ */
+#ifndef __ASM_ARM_SEMAPHORE_H
+#define __ASM_ARM_SEMAPHORE_H
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+#include <asm/locks.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INIT(name, cnt)				\
+{								\
+	.count	= ATOMIC_INIT(cnt),				\
+	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait),	\
+}
+
+#define __MUTEX_INITIALIZER(name) __SEMAPHORE_INIT(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)	\
+	struct semaphore name = __SEMAPHORE_INIT(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+static inline int sema_count(struct semaphore *sem)
+{
+	return atomic_read(&sem->count);
+}
+
+/*
+ * special register calling convention
+ */
+asmlinkage void __down_failed(void);
+asmlinkage int  __down_interruptible_failed(void);
+asmlinkage int  __down_trylock_failed(void);
+asmlinkage void __up_wakeup(void);
+
+extern void __down(struct semaphore * sem);
+extern int  __down_interruptible(struct semaphore * sem);
+extern int  __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down" is the actual routine that waits...
+ */
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	__down_op(sem, __down_failed);
+}
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down_interruptible" is the actual routine that waits...
+ */
+static inline int down_interruptible (struct semaphore * sem)
+{
+	might_sleep();
+	return __down_op_ret(sem, __down_interruptible_failed);
+}
+
+static inline int down_trylock(struct semaphore *sem)
+{
+	return __down_op_ret(sem, __down_trylock_failed);
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	__up_op(sem, __up_wakeup);
+}
+
+#endif
diff --git a/include/asm-arm/sembuf.h b/include/asm-arm/sembuf.h
new file mode 100644
index 000000000000..1c0283954289
--- /dev/null
+++ b/include/asm-arm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SEMBUF_H
+#define _ASMARM_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SEMBUF_H */
diff --git a/include/asm-arm/serial.h b/include/asm-arm/serial.h
new file mode 100644
index 000000000000..015b262dc145
--- /dev/null
+++ b/include/asm-arm/serial.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#define BASE_BAUD	(1843200 / 16)
+
+#endif
diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h
new file mode 100644
index 000000000000..adcbd79762bf
--- /dev/null
+++ b/include/asm-arm/setup.h
@@ -0,0 +1,218 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;		/* bit 0 = read-only */
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	u32	size;
+	u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	u8		x;
+	u8		y;
+	u16		video_page;
+	u8		video_mode;
+	u8		video_cols;
+	u16		video_ega_bx;
+	u8		video_lines;
+	u8		video_isvga;
+	u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	u32 start;	/* physical start address */
+	u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	u32 low;
+	u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	u16		lfb_width;
+	u16		lfb_height;
+	u16		lfb_depth;
+	u16		lfb_linelength;
+	u32		lfb_base;
+	u32		lfb_size;
+	u8		red_size;
+	u8		red_pos;
+	u8		green_size;
+	u8		green_pos;
+	u8		blue_size;
+	u8		blue_pos;
+	u8		rsvd_size;
+	u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	u32 memc_control_reg;
+	u32 vram_pages;
+	u8 sounddefault;
+	u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+/*
+ * Memory map description
+ */
+#ifdef CONFIG_ARCH_LH7A40X
+# define NR_BANKS 16
+#else
+# define NR_BANKS 8
+#endif
+
+struct meminfo {
+	int nr_banks;
+	struct {
+		unsigned long start;
+		unsigned long size;
+		int           node;
+	} bank[NR_BANKS];
+};
+
+/*
+ * Early command line parameters.
+ */
+struct early_params {
+	const char *arg;
+	void (*fn)(char **p);
+};
+
+#define __early_param(name,fn)					\
+static struct early_params __early_##fn __attribute_used__	\
+__attribute__((__section__("__early_param"))) = { name, fn }
+
+#endif
diff --git a/include/asm-arm/shmbuf.h b/include/asm-arm/shmbuf.h
new file mode 100644
index 000000000000..2e5c67ba1c97
--- /dev/null
+++ b/include/asm-arm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_SHMBUF_H
+#define _ASMARM_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SHMBUF_H */
diff --git a/include/asm-arm/shmparam.h b/include/asm-arm/shmparam.h
new file mode 100644
index 000000000000..a5223b3a9bf9
--- /dev/null
+++ b/include/asm-arm/shmparam.h
@@ -0,0 +1,16 @@
+#ifndef _ASMARM_SHMPARAM_H
+#define _ASMARM_SHMPARAM_H
+
+/*
+ * This should be the size of the virtually indexed cache/ways,
+ * or page size, whichever is greater since the cache aliases
+ * every size/ways bytes.
+ */
+#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
+
+/*
+ * Enforce SHMLBA in shmat
+ */
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* _ASMARM_SHMPARAM_H */
diff --git a/include/asm-arm/sigcontext.h b/include/asm-arm/sigcontext.h
new file mode 100644
index 000000000000..fc0b80b6a6fc
--- /dev/null
+++ b/include/asm-arm/sigcontext.h
@@ -0,0 +1,34 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long arm_r0;
+	unsigned long arm_r1;
+	unsigned long arm_r2;
+	unsigned long arm_r3;
+	unsigned long arm_r4;
+	unsigned long arm_r5;
+	unsigned long arm_r6;
+	unsigned long arm_r7;
+	unsigned long arm_r8;
+	unsigned long arm_r9;
+	unsigned long arm_r10;
+	unsigned long arm_fp;
+	unsigned long arm_ip;
+	unsigned long arm_sp;
+	unsigned long arm_lr;
+	unsigned long arm_pc;
+	unsigned long arm_cpsr;
+	unsigned long fault_address;
+};
+
+
+#endif
diff --git a/include/asm-arm/siginfo.h b/include/asm-arm/siginfo.h
new file mode 100644
index 000000000000..5e21852e6039
--- /dev/null
+++ b/include/asm-arm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_SIGINFO_H
+#define _ASMARM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h
new file mode 100644
index 000000000000..b033e5fd60fa
--- /dev/null
+++ b/include/asm-arm/signal.h
@@ -0,0 +1,194 @@
+#ifndef _ASMARM_SIGNAL_H
+#define _ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_INTERRUPT		is a no-op, but left due to historical reasons. Use the
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		0x80000000
+#define SA_SAMPLE_RANDOM	0x10000000
+#define SA_IRQNOMASK		0x08000000
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif
+
+#endif
diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h
new file mode 100644
index 000000000000..7f50ae0edf1b
--- /dev/null
+++ b/include/asm-arm/sizes.h
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h
new file mode 100644
index 000000000000..f21fd8f6bcdd
--- /dev/null
+++ b/include/asm-arm/smp.h
@@ -0,0 +1,58 @@
+/*
+ *  linux/include/asm-arm/smp.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_SMP_H
+#define __ASM_ARM_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+#include <asm/arch/smp.h>
+
+#ifndef CONFIG_SMP
+# error "<asm-arm/smp.h> included in non-SMP build"
+#endif
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+extern cpumask_t cpu_present_mask;
+#define cpu_possible_map cpu_present_mask
+
+/*
+ * at the moment, there's not a big penalty for changing CPUs
+ * (the >big< penalty is running SMP in the first place)
+ */
+#define PROC_CHANGE_PENALTY		15
+
+struct seq_file;
+
+/*
+ * generate IPI list text
+ */
+extern void show_ipi_list(struct seq_file *p);
+
+/*
+ * Move global data into per-processor storage.
+ */
+extern void smp_store_cpu_info(unsigned int cpuid);
+
+/*
+ * Raise an IPI cross call on CPUs in callmap.
+ */
+extern void smp_cross_call(cpumask_t callmap);
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+extern int boot_secondary(unsigned int cpu, struct task_struct *);
+
+#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/include/asm-arm/socket.h b/include/asm-arm/socket.h
new file mode 100644
index 000000000000..46d20585d951
--- /dev/null
+++ b/include/asm-arm/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASMARM_SOCKET_H
+#define _ASMARM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-arm/sockios.h b/include/asm-arm/sockios.h
new file mode 100644
index 000000000000..77c34087d513
--- /dev/null
+++ b/include/asm-arm/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_ARM_SOCKIOS_H
+#define __ARCH_ARM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
new file mode 100644
index 000000000000..182323619caa
--- /dev/null
+++ b/include/asm-arm/spinlock.h
@@ -0,0 +1,169 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#if __LINUX_ARM_ARCH__ < 6
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+/*
+ * ARMv6 Spin-locking.
+ *
+ * We (exclusively) read the old value, and decrement it.  If it
+ * hits zero, we may have won the lock, so we try (exclusively)
+ * storing it.
+ *
+ * Unlocked value: 0
+ * Locked value: 1
+ */
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0 }
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while (0)
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_unlock_wait(x)	do { barrier(); } while (spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]\n"
+"	teqeq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc", "memory");
+}
+
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc", "memory");
+
+	return tmp == 0;
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__(
+"	str	%1, [%0]"
+	:
+	: "r" (&lock->lock), "r" (0)
+	: "cc", "memory");
+}
+
+/*
+ * RWLOCKS
+ */
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED	(rwlock_t) { 0 }
+#define rwlock_init(x)		do { *(x) + RW_LOCK_UNLOCKED; } while (0)
+
+/*
+ * Write locks are easy - we just set bit 31.  When unlocking, we can
+ * just write zero since the lock is exclusively held.
+ */
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc", "memory");
+}
+
+static inline void _raw_write_unlock(rwlock_t *rw)
+{
+	__asm__ __volatile__(
+	"str	%1, [%0]"
+	:
+	: "r" (&rw->lock), "r" (0)
+	: "cc", "memory");
+}
+
+/*
+ * Read locks are a bit more hairy:
+ *  - Exclusively load the lock value.
+ *  - Increment it.
+ *  - Store new lock value if positive, and we still own this location.
+ *    If the value is negative, we've already failed.
+ *  - If we failed to store the value, we want a negative result.
+ *  - If we failed, try again.
+ * Unlocking is similarly hairy.  We may have multiple read locks
+ * currently active.  However, we know we won't have any write
+ * locks.
+ */
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+"	rsbpls	%0, %1, #0\n"
+"	bmi	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc", "memory");
+}
+
+static inline void _raw_read_unlock(rwlock_t *rw)
+{
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, #1\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc", "memory");
+}
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+static inline int _raw_write_trylock(rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc", "memory");
+
+	return tmp == 0;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h
new file mode 100644
index 000000000000..ca8e7a8436da
--- /dev/null
+++ b/include/asm-arm/stat.h
@@ -0,0 +1,94 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 
+
+struct stat {
+#if defined(__ARMEB__)
+	unsigned short st_dev;
+	unsigned short __pad1;
+#else
+	unsigned long  st_dev;
+#endif
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+#if defined(__ARMEB__)
+	unsigned short st_rdev;
+	unsigned short __pad2;
+#else
+	unsigned long  st_rdev;
+#endif
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ * Note: The kernel zero's the padded region because glibc might read them
+ * in the hope that the kernel has stretched to using larger sizes.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char   __pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+#if defined(__ARMEB__)
+	unsigned long   __pad4;		/* Future possible st_blocks hi bits */
+	unsigned long   st_blocks;	/* Number 512-byte blocks allocated. */
+#else /* Must be little */
+	unsigned long   st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long   __pad4;		/* Future possible st_blocks hi bits */
+#endif
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/include/asm-arm/statfs.h b/include/asm-arm/statfs.h
new file mode 100644
index 000000000000..e81f82783b87
--- /dev/null
+++ b/include/asm-arm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-arm/string.h b/include/asm-arm/string.h
new file mode 100644
index 000000000000..2a8ab162412f
--- /dev/null
+++ b/include/asm-arm/string.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMZERO
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n)							\
+	({								\
+		if ((n) != 0) {						\
+			if (__builtin_constant_p((v)) && (v) == 0)	\
+				__memzero((p),(n));			\
+			else						\
+				memset((p),(v),(n));			\
+		}							\
+		(p);							\
+	})
+
+#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
+
+#endif
diff --git a/include/asm-arm/suspend.h b/include/asm-arm/suspend.h
new file mode 100644
index 000000000000..cf0d0bdee74d
--- /dev/null
+++ b/include/asm-arm/suspend.h
@@ -0,0 +1,4 @@
+#ifndef _ASMARM_SUSPEND_H
+#define _ASMARM_SUSPEND_H
+
+#endif
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
new file mode 100644
index 000000000000..b5731290b4e5
--- /dev/null
+++ b/include/asm-arm/system.h
@@ -0,0 +1,390 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#define CPU_ARCH_UNKNOWN	0
+#define CPU_ARCH_ARMv3		1
+#define CPU_ARCH_ARMv4		2
+#define CPU_ARCH_ARMv4T		3
+#define CPU_ARCH_ARMv5		4
+#define CPU_ARCH_ARMv5T		5
+#define CPU_ARCH_ARMv5TE	6
+#define CPU_ARCH_ARMv5TEJ	7
+#define CPU_ARCH_ARMv6		8
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+
+#define CPUID_ID	0
+#define CPUID_CACHETYPE	1
+#define CPUID_TCM	2
+#define CPUID_TLBTYPE	3
+
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch.
+ * (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+
+struct thread_info;
+struct task_struct;
+
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+		__attribute__((noreturn));
+
+void die_if_kernel(const char *str, struct pt_regs *regs, int err);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, const char *name);
+
+#include <asm/proc-fns.h>
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+extern asmlinkage void __backtrace(void);
+
+extern int cpu_architecture(void);
+
+#define set_cr(x)					\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c1, c0, 0	@ set CR"	\
+	: : "r" (x) : "cc")
+
+#define get_cr()					\
+	({						\
+	unsigned int __val;				\
+	__asm__ __volatile__(				\
+	"mrc	p15, 0, %0, c1, c0, 0	@ get CR"	\
+	: "=r" (__val) : : "cc");			\
+	__val;						\
+	})
+
+extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
+extern unsigned long cr_alignment;	/* defined in entry-armv.S */
+
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+#ifdef CONFIG_SMP
+/*
+ * Define our own context switch locking.  This allows us to enable
+ * interrupts over the context switch, otherwise we end up with high
+ * interrupt latency.  The real problem area is switch_mm() which may
+ * do a full cache flush.
+ */
+#define prepare_arch_switch(rq,next)					\
+do {									\
+	spin_lock(&(next)->switch_lock);				\
+	spin_unlock_irq(&(rq)->lock);					\
+} while (0)
+
+#define finish_arch_switch(rq,prev)					\
+	spin_unlock(&(prev)->switch_lock)
+
+#define task_running(rq,p)						\
+	((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+#else
+/*
+ * Our UP-case is more simple, but we assume knowledge of how
+ * spin_unlock_irq() and friends are implemented.  This avoids
+ * us needlessly decrementing and incrementing the preempt count.
+ */
+#define prepare_arch_switch(rq,next)	local_irq_enable()
+#define finish_arch_switch(rq,prev)	spin_unlock(&(rq)->lock)
+#define task_running(rq,p)		((rq)->curr == (p))
+#endif
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last)					\
+do {									\
+	last = __switch_to(prev,prev->thread_info,next->thread_info);	\
+} while (0)
+
+/*
+ * CPU interrupt mask handling.
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define local_irq_save(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+	"cpsid	i"						\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+#define local_irq_enable()  __asm__("cpsie i	@ __sti" : : : "memory", "cc")
+#define local_irq_disable() __asm__("cpsid i	@ __cli" : : : "memory", "cc")
+#define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
+#define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
+
+#else
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#define local_irq_save(x)					\
+	({							\
+		unsigned long temp;				\
+		(void) (&temp == &x);				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+"	orr	%1, %0, #128\n"					\
+"	msr	cpsr_c, %1"					\
+	: "=r" (x), "=r" (temp)					\
+	:							\
+	: "memory", "cc");					\
+	})
+	
+/*
+ * Enable IRQs
+ */
+#define local_irq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_enable\n"	\
+"	bic	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable IRQs
+ */
+#define local_irq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_disable\n"	\
+"	orr	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Enable FIQs
+ */
+#define local_fiq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ stf\n"		\
+"	bic	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable FIQs
+ */
+#define local_fiq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ clf\n"		\
+"	orr	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+#endif
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define local_save_flags(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_save_flags"	\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(x)					\
+	__asm__ __volatile__(					\
+	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
+	:							\
+	: "r" (x)						\
+	: "memory", "cc")
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	flags & PSR_I_BIT;		\
+})
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+
+#define smp_mb()		mb()
+#define smp_rmb()		rmb()
+#define smp_wmb()		wmb()
+#define smp_read_barrier_depends()		read_barrier_depends()
+
+#else
+
+#define smp_mb()		barrier()
+#define smp_rmb()		barrier()
+#define smp_wmb()		barrier()
+#define smp_read_barrier_depends()		do { } while(0)
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+/*
+ * On the StrongARM, "swp" is terminally broken since it bypasses the
+ * cache totally.  This means that the cache becomes inconsistent, and,
+ * since we use normal loads/stores as well, this is really bad.
+ * Typically, this causes oopsen in filp_close, but could have other,
+ * more disasterous effects.  There are two work-arounds:
+ *  1. Disable interrupts and emulate the atomic swap
+ *  2. Clean the cache, perform atomic swap, flush the cache
+ *
+ * We choose (1) since its the "easiest" to achieve here and is not
+ * dependent on the processor type.
+ */
+#define swp_is_buggy
+#endif
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	extern void __bad_xchg(volatile void *, int);
+	unsigned long ret;
+#ifdef swp_is_buggy
+	unsigned long flags;
+#endif
+
+	switch (size) {
+#ifdef swp_is_buggy
+		case 1:
+			local_irq_save(flags);
+			ret = *(volatile unsigned char *)ptr;
+			*(volatile unsigned char *)ptr = x;
+			local_irq_restore(flags);
+			break;
+
+		case 4:
+			local_irq_save(flags);
+			ret = *(volatile unsigned long *)ptr;
+			*(volatile unsigned long *)ptr = x;
+			local_irq_restore(flags);
+			break;
+#else
+		case 1:	__asm__ __volatile__ ("swpb %0, %1, [%2]"
+					: "=&r" (ret)
+					: "r" (x), "r" (ptr)
+					: "memory", "cc");
+			break;
+		case 4:	__asm__ __volatile__ ("swp %0, %1, [%2]"
+					: "=&r" (ret)
+					: "r" (x), "r" (ptr)
+					: "memory", "cc");
+			break;
+#endif
+		default: __bad_xchg(ptr, size), ret = 0;
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h
new file mode 100644
index 000000000000..bbc6e1d24d3f
--- /dev/null
+++ b/include/asm-arm/termbits.h
@@ -0,0 +1,171 @@
+#ifndef __ASM_ARM_TERMBITS_H
+#define __ASM_ARM_TERMBITS_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR    010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h
new file mode 100644
index 000000000000..7b8f5e8ae063
--- /dev/null
+++ b/include/asm-arm/termios.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_ARM_TERMIOS_H
+#define __ASM_ARM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
+	unsigned short __tmp;					\
+	get_user(__tmp,&(termio)->x);				\
+	*(unsigned short *) &(termios)->x = __tmp;		\
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/include/asm-arm/therm.h b/include/asm-arm/therm.h
new file mode 100644
index 000000000000..e51c923ecdf3
--- /dev/null
+++ b/include/asm-arm/therm.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor
+ *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
+ */
+#ifndef __ASM_THERM_H
+#define __ASM_THERM_H
+
+/* ioctl numbers for /dev/therm */
+#define CMD_SET_THERMOSTATE	0x53
+#define CMD_GET_THERMOSTATE	0x54
+#define CMD_GET_STATUS		0x56
+#define CMD_GET_TEMPERATURE	0x57
+#define CMD_SET_THERMOSTATE2	0x58
+#define CMD_GET_THERMOSTATE2	0x59
+#define CMD_GET_TEMPERATURE2	0x5a
+#define CMD_GET_FAN		0x5b
+#define CMD_SET_FAN		0x5c
+
+#define FAN_OFF			0
+#define FAN_ON			1
+#define FAN_ALWAYS_ON		2
+
+struct therm {
+	int hi;
+	int lo;
+};
+
+#endif
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
new file mode 100644
index 000000000000..a61618fb433c
--- /dev/null
+++ b/include/asm-arm/thread_info.h
@@ -0,0 +1,147 @@
+/*
+ *  linux/include/asm-arm/thread_info.h
+ *
+ *  Copyright (C) 2002 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/fpstate.h>
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/domain.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	sl;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+	__u32	extra[2];		/* Xscale 'acc' register, etc */
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	__s32			preempt_count;	/* 0 => preemptable, <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			cpu;		/* cpu */
+	__u32			cpu_domain;	/* cpu domain */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	__u8			used_cp[16];	/* thread used copro */
+	unsigned long		tp_value;
+	union fp_state		fpstate;
+	union vfp_state		vfpstate;
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= 1,						\
+	.addr_limit	= KERNEL_DS,					\
+	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#define THREAD_SIZE		8192
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+extern struct thread_info *alloc_thread_info(struct task_struct *task);
+extern void free_thread_info(struct thread_info *);
+
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(pc_pointer((tsk)->thread_info->cpu_context.pc)))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)((tsk)->thread_info->cpu_context.fp))
+
+extern void iwmmxt_task_disable(struct thread_info *);
+extern void iwmmxt_task_copy(struct thread_info *, void *);
+extern void iwmmxt_task_restore(struct thread_info *, void *);
+extern void iwmmxt_task_release(struct thread_info *);
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occuring.  See include/asm-arm/hardirq.h.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_NOTIFY_RESUME	- resumption notification requested
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_NOTIFY_RESUME	0
+#define TIF_SIGPENDING		1
+#define TIF_NEED_RESCHED	2
+#define TIF_SYSCALL_TRACE	8
+#define TIF_POLLING_NRFLAG	16
+#define TIF_USING_IWMMXT	17
+#define TIF_MEMDIE		18
+
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm/timex.h b/include/asm-arm/timex.h
new file mode 100644
index 000000000000..7b8d4cb24be0
--- /dev/null
+++ b/include/asm-arm/timex.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/timex.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+#include <asm/arch/timex.h>
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif
diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h
new file mode 100644
index 000000000000..9bb325c54645
--- /dev/null
+++ b/include/asm-arm/tlb.h
@@ -0,0 +1,102 @@
+/*
+ *  linux/include/asm-arm/tlb.h
+ *
+ *  Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Experimentation shows that on a StrongARM, it appears to be faster
+ *  to use the "invalidate whole tlb" rather than "invalidate single
+ *  tlb" for this.
+ *
+ *  This appears true for both the process fork+exit case, as well as
+ *  the munmap-large-area case.
+ */
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		freed;
+	unsigned int		fullmm;
+
+	unsigned int		flushes;
+	unsigned int		avoided_flushes;
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	int cpu = smp_processor_id();
+	struct mmu_gather *tlb = &per_cpu(mmu_gathers, cpu);
+
+	tlb->mm = mm;
+	tlb->freed = 0;
+	tlb->fullmm = full_mm_flush;
+
+	return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = tlb->mm;
+	unsigned long freed = tlb->freed;
+	int rss = get_mm_counter(mm, rss);
+
+	if (rss < freed)
+		freed = rss;
+	add_mm_counter(mm, rss, -freed);
+
+	if (tlb->fullmm)
+		flush_tlb_mm(mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline unsigned int tlb_is_full_mm(struct mmu_gather *tlb)
+{
+	return tlb->fullmm;
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+}
+
+#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb,ptep)		pte_free(ptep)
+#define pmd_free_tlb(tlb,pmdp)		pmd_free(pmdp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#endif
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
new file mode 100644
index 000000000000..8a864b118569
--- /dev/null
+++ b/include/asm-arm/tlbflush.h
@@ -0,0 +1,404 @@
+/*
+ *  linux/include/asm-arm/tlbflush.h
+ *
+ *  Copyright (C) 1999-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <asm/glue.h>
+
+#define TLB_V3_PAGE	(1 << 0)
+#define TLB_V4_U_PAGE	(1 << 1)
+#define TLB_V4_D_PAGE	(1 << 2)
+#define TLB_V4_I_PAGE	(1 << 3)
+#define TLB_V6_U_PAGE	(1 << 4)
+#define TLB_V6_D_PAGE	(1 << 5)
+#define TLB_V6_I_PAGE	(1 << 6)
+
+#define TLB_V3_FULL	(1 << 8)
+#define TLB_V4_U_FULL	(1 << 9)
+#define TLB_V4_D_FULL	(1 << 10)
+#define TLB_V4_I_FULL	(1 << 11)
+#define TLB_V6_U_FULL	(1 << 12)
+#define TLB_V6_D_FULL	(1 << 13)
+#define TLB_V6_I_FULL	(1 << 14)
+
+#define TLB_V6_U_ASID	(1 << 16)
+#define TLB_V6_D_ASID	(1 << 17)
+#define TLB_V6_I_ASID	(1 << 18)
+
+#define TLB_DCLEAN	(1 << 30)
+#define TLB_WB		(1 << 31)
+
+/*
+ *	MMU TLB Model
+ *	=============
+ *
+ *	We have the following to choose from:
+ *	  v3    - ARMv3
+ *	  v4    - ARMv4 without write buffer
+ *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
+ *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ */
+#undef _TLB
+#undef MULTI_TLB
+
+#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V3
+# define v3_possible_flags	v3_tlb_flags
+# define v3_always_flags	v3_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v3
+# endif
+#else
+# define v3_possible_flags	0
+# define v3_always_flags	(-1UL)
+#endif
+
+#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WT
+# define v4_possible_flags	v4_tlb_flags
+# define v4_always_flags	v4_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4
+# endif
+#else
+# define v4_possible_flags	0
+# define v4_always_flags	(-1UL)
+#endif
+
+#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WBI
+# define v4wbi_possible_flags	v4wbi_tlb_flags
+# define v4wbi_always_flags	v4wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define v4wbi_possible_flags	0
+# define v4wbi_always_flags	(-1UL)
+#endif
+
+#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WB
+# define v4wb_possible_flags	v4wb_tlb_flags
+# define v4wb_always_flags	v4wb_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wb
+# endif
+#else
+# define v4wb_possible_flags	0
+# define v4wb_always_flags	(-1UL)
+#endif
+
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
+			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
+			 TLB_V6_I_ASID | TLB_V6_D_ASID)
+
+#ifdef CONFIG_CPU_TLB_V6
+# define v6wbi_possible_flags	v6wbi_tlb_flags
+# define v6wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v6wbi
+# endif
+#else
+# define v6wbi_possible_flags	0
+# define v6wbi_always_flags	(-1UL)
+#endif
+
+#ifndef _TLB
+#error Unknown TLB model
+#endif
+
+#ifndef __ASSEMBLY__
+
+struct cpu_tlb_fns {
+	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+	void (*flush_kern_range)(unsigned long, unsigned long);
+	unsigned long tlb_flags;
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_TLB
+
+#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
+#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
+
+#else
+
+#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+#endif
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags			cpu_tlb.tlb_flags
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+/*
+ * We optimise the code below by:
+ *  - building a set of TLB flags that might be set in __cpu_tlb_flags
+ *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ *  - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case.  We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags	(v3_possible_flags | \
+				 v4_possible_flags | \
+				 v4wbi_possible_flags | \
+				 v4wb_possible_flags | \
+				 v6wbi_possible_flags)
+
+#define always_tlb_flags	(v3_always_flags & \
+				 v4_always_flags & \
+				 v4wbi_always_flags & \
+				 v4wb_always_flags & \
+				 v6wbi_always_flags)
+
+#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+
+static inline void flush_tlb_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
+
+	if (tlb_flag(TLB_V3_FULL))
+		asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (zero));
+	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
+		asm("mcr%? p15, 0, %0, c8, c7, 0" : : "r" (zero));
+	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
+		asm("mcr%? p15, 0, %0, c8, c6, 0" : : "r" (zero));
+	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
+		asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
+
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_FULL))
+			asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (zero));
+		if (tlb_flag(TLB_V4_U_FULL))
+			asm("mcr%? p15, 0, %0, c8, c7, 0" : : "r" (zero));
+		if (tlb_flag(TLB_V4_D_FULL))
+			asm("mcr%? p15, 0, %0, c8, c6, 0" : : "r" (zero));
+		if (tlb_flag(TLB_V4_I_FULL))
+			asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
+	}
+
+	if (tlb_flag(TLB_V6_U_ASID))
+		asm("mcr%? p15, 0, %0, c8, c7, 2" : : "r" (asid));
+	if (tlb_flag(TLB_V6_D_ASID))
+		asm("mcr%? p15, 0, %0, c8, c6, 2" : : "r" (asid));
+	if (tlb_flag(TLB_V6_I_ASID))
+		asm("mcr%? p15, 0, %0, c8, c5, 2" : : "r" (asid));
+}
+
+static inline void
+flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
+
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_PAGE))
+			asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (uaddr));
+		if (tlb_flag(TLB_V4_U_PAGE))
+			asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (uaddr));
+		if (tlb_flag(TLB_V4_D_PAGE))
+			asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (uaddr));
+		if (tlb_flag(TLB_V4_I_PAGE))
+			asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr));
+		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+			asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
+	}
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (uaddr));
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (uaddr));
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr));
+}
+
+static inline void flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
+
+	if (tlb_flag(TLB_V3_PAGE))
+		asm("mcr%? p15, 0, %0, c6, c0, 0" : : "r" (kaddr));
+	if (tlb_flag(TLB_V4_U_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (kaddr));
+	if (tlb_flag(TLB_V4_D_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr));
+	if (tlb_flag(TLB_V4_I_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr));
+	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+		asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c7, 1" : : "r" (kaddr));
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr));
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr));
+}
+
+/*
+ *	flush_pmd_entry
+ *
+ *	Flush a PMD entry (word aligned, or double-word aligned) to
+ *	RAM if the TLB for the CPU we are running on requires this.
+ *	This is typically used when we are creating PMD entries.
+ *
+ *	clean_pmd_entry
+ *
+ *	Clean (but don't drain the write buffer) if the CPU requires
+ *	these operations.  This is typically used when we are removing
+ *	PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr%?	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd));
+	if (tlb_flag(TLB_WB))
+		asm("mcr%?	p15, 0, %0, c7, c10, 4	@ flush_pmd"
+			: : "r" (zero));
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr%?	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd));
+}
+
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+/*
+ * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+
+/*
+ * ARM processors do not cache TLB tables in RAM.
+ */
+#define flush_tlb_pgtables(mm,start,end)	do { } while (0)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/topology.h b/include/asm-arm/topology.h
new file mode 100644
index 000000000000..accbd7cad9b5
--- /dev/null
+++ b/include/asm-arm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_TOPOLOGY_H
+#define _ASM_ARM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
new file mode 100644
index 000000000000..d4f34dc83eb0
--- /dev/null
+++ b/include/asm-arm/traps.h
@@ -0,0 +1,18 @@
+#ifndef _ASMARM_TRAP_H
+#define _ASMARM_TRAP_H
+
+#include <linux/list.h>
+
+struct undef_hook {
+	struct list_head node;
+	u32 instr_mask;
+	u32 instr_val;
+	u32 cpsr_mask;
+	u32 cpsr_val;
+	int (*fn)(struct pt_regs *regs, unsigned int instr);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
+#endif
diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h
new file mode 100644
index 000000000000..f4c92e4c8c02
--- /dev/null
+++ b/include/asm-arm/types.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h
new file mode 100644
index 000000000000..a7c018b8a0d4
--- /dev/null
+++ b/include/asm-arm/uaccess.h
@@ -0,0 +1,438 @@
+/*
+ *  linux/include/asm-arm/uaccess.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+#include <asm/memory.h>
+#include <asm/domain.h>
+#include <asm/system.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * Note that this is actually 0x1,0000,0000
+ */
+#define KERNEL_DS	0x00000000
+#define USER_DS		TASK_SIZE
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs (mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
+}
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define __addr_ok(addr) ({ \
+	unsigned long flag; \
+	__asm__("cmp %2, %0; movlo %0, #0" \
+		: "=&r" (flag) \
+		: "0" (current_thread_info()->addr_limit), "r" (addr) \
+		: "cc"); \
+	(flag == 0); })
+
+/* We use 33-bit arithmetic here... */
+#define __range_ok(addr,size) ({ \
+	unsigned long flag, sum; \
+	__chk_user_ptr(addr);	\
+	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
+		: "=&r" (flag), "=&r" (sum) \
+		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+		: "cc"); \
+	flag; })
+
+#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * Single-value transfer routines.  They automatically use the right
+ * size if we just have the right pointer type.  Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value.  This means zeroing out the destination variable
+ * or buffer on error.  Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path.  When we only write to user space, there is no
+ * problem.
+ *
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success.  Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+extern int __get_user_8(void *);
+extern int __get_user_bad(void);
+
+#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		"bl	__get_user_" #__s				\
+		: "=&r" (__e), "=r" (__r2)				\
+		: "0" (__p)						\
+		: __i, "cc")
+
+#define get_user(x,p)							\
+	({								\
+		const register typeof(*(p)) __user *__p asm("r0") = (p);\
+		register typeof(*(p)) __r2 asm("r2");			\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__get_user_x(__r2, __p, __e, 1, "lr");		\
+	       		break;						\
+		case 2:							\
+			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			break;						\
+		case 4:							\
+	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			break;						\
+		case 8:							\
+			__get_user_x(__r2, __p, __e, 8, "lr");		\
+	       		break;						\
+		default: __e = __get_user_bad(); break;			\
+		}							\
+		x = __r2;						\
+		__e;							\
+	})
+
+#define __get_user(x,ptr)						\
+({									\
+	long __gu_err = 0;						\
+	__get_user_err((x),(ptr),__gu_err);				\
+	__gu_err;							\
+})
+
+#define __get_user_error(x,ptr,err)					\
+({									\
+	__get_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __get_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __gu_addr = (unsigned long)(ptr);			\
+	unsigned long __gu_val;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
+	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
+	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
+	default: (__gu_val) = __get_user_bad();				\
+	}								\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+#define __get_user_asm_byte(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = __b1 | (__b2 << 8);				\
+})
+#else
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = (__b1 << 8) | __b2;				\
+})
+#endif
+
+#define __get_user_asm_word(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+extern int __put_user_bad(void);
+
+#define __put_user_x(__r2,__p,__e,__s)					\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		"bl	__put_user_" #__s				\
+		: "=&r" (__e)						\
+		: "0" (__p), "r" (__r2)					\
+		: "ip", "lr", "cc")
+
+#define put_user(x,p)							\
+	({								\
+		const register typeof(*(p)) __r2 asm("r2") = (x);	\
+		const register typeof(*(p)) __user *__p asm("r0") = (p);\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__put_user_x(__r2, __p, __e, 1);		\
+			break;						\
+		case 2:							\
+			__put_user_x(__r2, __p, __e, 2);		\
+			break;						\
+		case 4:							\
+			__put_user_x(__r2, __p, __e, 4);		\
+			break;						\
+		case 8:							\
+			__put_user_x(__r2, __p, __e, 8);		\
+			break;						\
+		default: __e = __put_user_bad(); break;			\
+		}							\
+		__e;							\
+	})
+
+#define __put_user(x,ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_err((x),(ptr),__pu_err);				\
+	__pu_err;							\
+})
+
+#define __put_user_error(x,ptr,err)					\
+({									\
+	__put_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __put_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __pu_addr = (unsigned long)(ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
+	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
+	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
+	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+#define __put_user_asm_byte(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp, __pu_addr, err);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+})
+#else
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+})
+#endif
+
+#define __put_user_asm_word(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define	__reg_oper0	"%R2"
+#define	__reg_oper1	"%Q2"
+#else
+#define	__reg_oper0	"%Q2"
+#define	__reg_oper1	"%R2"
+#endif
+
+#define __put_user_asm_dword(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
+	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
+	"3:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"4:	mov	%0, %3\n"				\
+	"	b	3b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 4b\n"				\
+	"	.long	2b, 4b\n"				\
+	"	.previous"					\
+	: "+r" (err), "+r" (__pu_addr)				\
+	: "r" (x), "i" (-EFAULT)				\
+	: "cc")
+
+extern unsigned long __arch_copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __arch_copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __arch_clear_user(void __user *addr, unsigned long n);
+extern unsigned long __arch_strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long __arch_strnlen_user(const char __user *s, long n);
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __arch_copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memzero(to, n);
+	return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __arch_copy_from_user(to, from, n);
+}
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __arch_copy_to_user(to, from, n);
+	return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __arch_copy_to_user(to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long clear_user (void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __arch_clear_user(to, n);
+	return n;
+}
+
+static inline unsigned long __clear_user (void __user *to, unsigned long n)
+{
+	return __arch_clear_user(to, n);
+}
+
+static inline long strncpy_from_user (char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __arch_strncpy_from_user(dst, src, count);
+	return res;
+}
+
+static inline long __strncpy_from_user (char *dst, const char __user *src, long count)
+{
+	return __arch_strncpy_from_user(dst, src, count);
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long strnlen_user(const char __user *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		res = __arch_strnlen_user(s, n);
+
+	return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm/ucontext.h b/include/asm-arm/ucontext.h
new file mode 100644
index 000000000000..f853130137cc
--- /dev/null
+++ b/include/asm-arm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASMARM_UCONTEXT_H
+#define _ASMARM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h
new file mode 100644
index 000000000000..1b39c2f322c9
--- /dev/null
+++ b/include/asm-arm/unaligned.h
@@ -0,0 +1,191 @@
+#ifndef __ASM_ARM_UNALIGNED_H
+#define __ASM_ARM_UNALIGNED_H
+
+#include <asm/types.h>
+
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file.  Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	3		7	3
+ *	8		20	6		16	6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	4		7	4
+ *	8		19	8		15	6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers).  Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2_le(__p)					\
+	(__p[0] | __p[1] << 8)
+
+#define __get_unaligned_2_be(__p)					\
+	(__p[0] << 8 | __p[1])
+
+#define __get_unaligned_4_le(__p)					\
+	(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define __get_unaligned_4_be(__p)					\
+	(__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3])
+
+#define __get_unaligned_le(ptr)					\
+	({							\
+		__typeof__(*(ptr)) __v;				\
+		__u8 *__p = (__u8 *)(ptr);			\
+		switch (sizeof(*(ptr))) {			\
+		case 1:	__v = *(ptr);			break;	\
+		case 2: __v = __get_unaligned_2_le(__p);	break;	\
+		case 4: __v = __get_unaligned_4_le(__p);	break;	\
+		case 8: {					\
+				unsigned int __v1, __v2;	\
+				__v2 = __get_unaligned_4_le((__p+4)); \
+				__v1 = __get_unaligned_4_le(__p);	\
+				__v = ((unsigned long long)__v2 << 32 | __v1);	\
+			}					\
+			break;					\
+		default: __v = __bug_unaligned_x(__p);	break;	\
+		}						\
+		__v;						\
+	})
+
+#define __get_unaligned_be(ptr)					\
+	({							\
+		__typeof__(*(ptr)) __v;				\
+		__u8 *__p = (__u8 *)(ptr);			\
+		switch (sizeof(*(ptr))) {			\
+		case 1:	__v = *(ptr);			break;	\
+		case 2: __v = __get_unaligned_2_be(__p);	break;	\
+		case 4: __v = __get_unaligned_4_be(__p);	break;	\
+		case 8: {					\
+				unsigned int __v1, __v2;	\
+				__v2 = __get_unaligned_4_be(__p); \
+				__v1 = __get_unaligned_4_be((__p+4));	\
+				__v = ((unsigned long long)__v2 << 32 | __v1);	\
+			}					\
+			break;					\
+		default: __v = __bug_unaligned_x(__p);	break;	\
+		}						\
+		__v;						\
+	})
+
+
+static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p)
+{
+	*__p++ = __v;
+	*__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_2_be(__u32 __v, register __u8 *__p)
+{
+	*__p++ = __v >> 8;
+	*__p++ = __v;
+}
+
+static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p)
+{
+	__put_unaligned_2_le(__v >> 16, __p + 2);
+	__put_unaligned_2_le(__v, __p);
+}
+
+static inline void __put_unaligned_4_be(__u32 __v, register __u8 *__p)
+{
+	__put_unaligned_2_be(__v >> 16, __p);
+	__put_unaligned_2_be(__v, __p + 2);
+}
+
+static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p)
+{
+	/*
+	 * tradeoff: 8 bytes of stack for all unaligned puts (2
+	 * instructions), or an extra register in the long long
+	 * case - go for the extra register.
+	 */
+	__put_unaligned_4_le(__v >> 32, __p+4);
+	__put_unaligned_4_le(__v, __p);
+}
+
+static inline void __put_unaligned_8_be(const unsigned long long __v, register __u8 *__p)
+{
+	/*
+	 * tradeoff: 8 bytes of stack for all unaligned puts (2
+	 * instructions), or an extra register in the long long
+	 * case - go for the extra register.
+	 */
+	__put_unaligned_4_be(__v >> 32, __p);
+	__put_unaligned_4_be(__v, __p+4);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define __put_unaligned_le(val,ptr)					\
+	({							\
+		switch (sizeof(*(ptr))) {			\
+		case 1:						\
+			*(ptr) = (val);				\
+			break;					\
+		case 2: __put_unaligned_2_le((val),(__u8 *)(ptr));	\
+			break;					\
+		case 4:	__put_unaligned_4_le((val),(__u8 *)(ptr));	\
+			break;					\
+		case 8:	__put_unaligned_8_le((val),(__u8 *)(ptr)); \
+			break;					\
+		default: __bug_unaligned_x(ptr);		\
+			break;					\
+		}						\
+		(void) 0;					\
+	})
+
+#define __put_unaligned_be(val,ptr)					\
+	({							\
+		switch (sizeof(*(ptr))) {			\
+		case 1:						\
+			*(ptr) = (val);				\
+			break;					\
+		case 2: __put_unaligned_2_be((val),(__u8 *)(ptr));	\
+			break;					\
+		case 4:	__put_unaligned_4_be((val),(__u8 *)(ptr));	\
+			break;					\
+		case 8:	__put_unaligned_8_be((val),(__u8 *)(ptr)); \
+			break;					\
+		default: __bug_unaligned_x(ptr);		\
+			break;					\
+		}						\
+		(void) 0;					\
+	})
+
+/*
+ * Select endianness
+ */
+#ifndef __ARMEB__
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+#else
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+#endif
+
+#endif
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
new file mode 100644
index 000000000000..a19ec09eaa01
--- /dev/null
+++ b/include/asm-arm/unistd.h
@@ -0,0 +1,558 @@
+/*
+ *  linux/include/asm-arm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#include <linux/linkage.h>
+
+#if defined(__thumb__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	0x900000
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+
+#if 0 /* reserve these for un-muxing socketcall */
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#endif
+
+#if 0 /* reserve these for un-muxing ipc */
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#endif
+
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+
+#if 0 /* reserved for un-muxing ipc */
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#endif
+
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+0x800)
+
+#define __sys2(x) #x
+#define __sys1(x) __sys2(x)
+
+#ifndef __syscall
+#if defined(__thumb__)
+#define __syscall(name)					\
+	"push	{r7}\n\t"				\
+	"mov	r7, #" __sys1(__NR_##name) "\n\t"	\
+	"swi	0\n\t"					\
+	"pop	{r7}"
+#else
+#define __syscall(name) "swi\t" __sys1(__NR_##name) ""
+#endif
+#endif
+
+#define __syscall_return(type, res)					\
+do {									\
+	if ((unsigned long)(res) >= (unsigned long)(-129)) {		\
+		errno = -(res);						\
+		res = -1;						\
+	}								\
+	return (type) (res);						\
+} while (0)
+
+#define _syscall0(type,name)						\
+type name(void) {							\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	:								\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall1(type,name,type1,arg1) 				\
+type name(type1 arg1) { 						\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0)							\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1,type2 arg2) {					\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1) 					\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1,type2 arg2,type3 arg3) {				\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2)				\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4)\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) {		\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3)			\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+  
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5)	\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) {	\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __r4 __asm__("r4") = (long)arg5;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3),"r" (__r4)	\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6)	\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) {	\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __r4 __asm__("r4") = (long)arg5;			\
+  register long __r5 __asm__("r5") = (long)arg6;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3), "r" (__r4),"r" (__r5)		\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/syscalls.h>
+
+extern long execve(const char *file, char **argv, char **envp);
+
+struct pt_regs;
+asmlinkage int sys_execve(char *filenamei, char **argv, char **envp,
+			struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			struct pt_regs *regs);
+asmlinkage int sys_fork(struct pt_regs *regs);
+asmlinkage int sys_vfork(struct pt_regs *regs);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm/user.h b/include/asm-arm/user.h
new file mode 100644
index 000000000000..3e8b0f879159
--- /dev/null
+++ b/include/asm-arm/user.h
@@ -0,0 +1,84 @@
+#ifndef _ARM_USER_H
+#define _ARM_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_fp {
+	struct fp_reg {
+		unsigned int sign1:1;
+		unsigned int unused:15;
+		unsigned int sign2:1;
+		unsigned int exponent:14;
+		unsigned int j:1;
+		unsigned int mantissa1:31;
+		unsigned int mantissa0:32;
+	} fpregs[8];
+	unsigned int fpsr:32;
+	unsigned int fpcr:32;
+	unsigned char ftype[8];
+	unsigned int init_flag;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct pt_regs regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  struct pt_regs * u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+  struct user_fp u_fp;		/* FP state */
+  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
+  				/* the FP registers. */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ARM_USER_H */
diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h
new file mode 100644
index 000000000000..14c5e0946c47
--- /dev/null
+++ b/include/asm-arm/vfp.h
@@ -0,0 +1,78 @@
+/*
+ * linux/include/asm-arm/vfp.h
+ *
+ * VFP register definitions.
+ * First, the standard VFP set.
+ */
+
+#define FPSID			cr0
+#define FPSCR			cr1
+#define FPEXC			cr8
+
+/* FPSID bits */
+#define FPSID_IMPLEMENTER_BIT	(24)
+#define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
+#define FPSID_SOFTWARE		(1<<23)
+#define FPSID_FORMAT_BIT	(21)
+#define FPSID_FORMAT_MASK	(0x3  << FPSID_FORMAT_BIT)
+#define FPSID_NODOUBLE		(1<<20)
+#define FPSID_ARCH_BIT		(16)
+#define FPSID_ARCH_MASK		(0xF  << FPSID_ARCH_BIT)
+#define FPSID_PART_BIT		(8)
+#define FPSID_PART_MASK		(0xFF << FPSID_PART_BIT)
+#define FPSID_VARIANT_BIT	(4)
+#define FPSID_VARIANT_MASK	(0xF  << FPSID_VARIANT_BIT)
+#define FPSID_REV_BIT		(0)
+#define FPSID_REV_MASK		(0xF  << FPSID_REV_BIT)
+
+/* FPEXC bits */
+#define FPEXC_EXCEPTION		(1<<31)
+#define FPEXC_ENABLE		(1<<30)
+
+/* FPSCR bits */
+#define FPSCR_DEFAULT_NAN	(1<<25)
+#define FPSCR_FLUSHTOZERO	(1<<24)
+#define FPSCR_ROUND_NEAREST	(0<<22)
+#define FPSCR_ROUND_PLUSINF	(1<<22)
+#define FPSCR_ROUND_MINUSINF	(2<<22)
+#define FPSCR_ROUND_TOZERO	(3<<22)
+#define FPSCR_RMODE_BIT		(22)
+#define FPSCR_RMODE_MASK	(3 << FPSCR_RMODE_BIT)
+#define FPSCR_STRIDE_BIT	(20)
+#define FPSCR_STRIDE_MASK	(3 << FPSCR_STRIDE_BIT)
+#define FPSCR_LENGTH_BIT	(16)
+#define FPSCR_LENGTH_MASK	(7 << FPSCR_LENGTH_BIT)
+#define FPSCR_IOE		(1<<8)
+#define FPSCR_DZE		(1<<9)
+#define FPSCR_OFE		(1<<10)
+#define FPSCR_UFE		(1<<11)
+#define FPSCR_IXE		(1<<12)
+#define FPSCR_IDE		(1<<15)
+#define FPSCR_IOC		(1<<0)
+#define FPSCR_DZC		(1<<1)
+#define FPSCR_OFC		(1<<2)
+#define FPSCR_UFC		(1<<3)
+#define FPSCR_IXC		(1<<4)
+#define FPSCR_IDC		(1<<7)
+
+/*
+ * VFP9-S specific.
+ */
+#define FPINST			cr9
+#define FPINST2			cr10
+
+/* FPEXC bits */
+#define FPEXC_FPV2		(1<<28)
+#define FPEXC_LENGTH_BIT	(8)
+#define FPEXC_LENGTH_MASK	(7 << FPEXC_LENGTH_BIT)
+#define FPEXC_INV		(1 << 7)
+#define FPEXC_UFC		(1 << 3)
+#define FPEXC_OFC		(1 << 2)
+#define FPEXC_IOC		(1 << 0)
+
+/* Bit patterns for decoding the packaged operation descriptors */
+#define VFPOPDESC_LENGTH_BIT	(9)
+#define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
+#define VFPOPDESC_UNUSED_BIT	(24)
+#define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
+#define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h
new file mode 100644
index 000000000000..15bd6e74c9cf
--- /dev/null
+++ b/include/asm-arm/vfpmacros.h
@@ -0,0 +1,25 @@
+/*
+ * linux/include/asm-arm/vfpmacros.h
+ *
+ * Assembler-only file containing VFP macros and register definitions.
+ */
+#include "vfp.h"
+
+@ Macros to allow building with old toolkits (with no VFP support)
+	.macro	VFPFMRX, rd, sysreg, cond
+	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
+	.endm
+
+	.macro	VFPFMXR, sysreg, rd, cond
+	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
+	.endm
+
+	@ read all the working registers back into the VFP
+	.macro	VFPFLDMIA, base
+	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
+	.endm
+
+	@ write all the working registers out of the VFP
+	.macro	VFPFSTMIA, base
+	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
+	.endm
diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h
new file mode 100644
index 000000000000..926e5ee128e9
--- /dev/null
+++ b/include/asm-arm/vga.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_VGA_H
+#define ASMARM_VGA_H
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#define VGA_MAP_MEM(x)	(PCIMEM_BASE + (x))
+
+#define vga_readb(x)	(*((volatile unsigned char *)x))
+#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
+
+#endif
diff --git a/include/asm-arm/xor.h b/include/asm-arm/xor.h
new file mode 100644
index 000000000000..e7c4cf58bed1
--- /dev/null
+++ b/include/asm-arm/xor.h
@@ -0,0 +1,141 @@
+/*
+ *  linux/include/asm-arm/xor.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+	__asm__("ldmia	%0, {%1, %2}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2) \
+		: "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+		: "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+	__asm__("ldmia	%0!, {%1, %2}" \
+		: "=r" (src), "=r" (b1), "=r" (b2) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		XOR_BLOCK_4(p3);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		XOR_BLOCK_2(p5);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+	.name	= "arm4regs",
+	.do_2	= xor_arm4regs_2,
+	.do_3	= xor_arm4regs_3,
+	.do_4	= xor_arm4regs_4,
+	.do_5	= xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_arm4regs);	\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_32regs);	\
+	} while (0)
diff --git a/include/asm-arm26/a.out.h b/include/asm-arm26/a.out.h
new file mode 100644
index 000000000000..9b2702c42c87
--- /dev/null
+++ b/include/asm-arm26/a.out.h
@@ -0,0 +1,38 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <asm/types.h>
+
+struct exec
+{
+  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
+  __u32 a_text;		/* length of text, in bytes */
+  __u32 a_data;		/* length of data, in bytes */
+  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
+  __u32 a_syms;		/* length of symbol table data in file, in bytes */
+  __u32 a_entry;	/* start address */
+  __u32 a_trsize;	/* length of relocation info for text, in bytes */
+  __u32 a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a)	(0x00008000)
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#define M_ARM 103
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#endif
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT	(0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-arm26/assembler.h b/include/asm-arm26/assembler.h
new file mode 100644
index 000000000000..83f9aec55e4f
--- /dev/null
+++ b/include/asm-arm26/assembler.h
@@ -0,0 +1,106 @@
+/*
+ * linux/asm/assembler.h
+ *
+ * This file contains arm architecture specific defines
+ * for the different processors.
+ *
+ * Do not include any C declarations in this file - it is included by
+ * assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#define pull            lsr
+#define push            lsl
+#define byte(x)         (x*8)
+
+#ifdef __STDC__
+#define LOADREGS(cond, base, reglist...)\
+	ldm##cond	base,reglist^
+
+#define RETINSTR(instr, regs...)\
+	instr##s	regs
+#else
+#define LOADREGS(cond, base, reglist...)\
+	ldm/**/cond	base,reglist^
+
+#define RETINSTR(instr, regs...)\
+	instr/**/s	regs
+#endif
+
+#define MODENOP\
+	mov	r0, r0
+
+#define MODE(savereg,tmpreg,mode) \
+	mov	savereg, pc; \
+	bic	tmpreg, savereg, $0x0c000003; \
+	orr	tmpreg, tmpreg, $mode; \
+	teqp	tmpreg, $0
+
+#define RESTOREMODE(savereg) \
+	teqp	savereg, $0
+
+#define SAVEIRQS(tmpreg)
+
+#define RESTOREIRQS(tmpreg)
+
+#define DISABLEIRQS(tmpreg)\
+	teqp	pc, $0x08000003
+
+#define ENABLEIRQS(tmpreg)\
+	teqp	pc, $0x00000003
+
+#define USERMODE(tmpreg)\
+	teqp	pc, $0x00000000;\
+	mov	r0, r0
+
+#define SVCMODE(tmpreg)\
+	teqp	pc, $0x00000003;\
+	mov	r0, r0
+
+
+/*
+ * Save the current IRQ state and disable IRQs
+ * Note that this macro assumes FIQs are enabled, and
+ * that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr, temp
+  mov \oldcpsr, pc
+  orr \temp, \oldcpsr, #0x08000000
+  teqp \temp, #0
+  .endm
+
+/*
+ * Restore interrupt state previously stored in
+ * a register
+ * ** Actually do nothing on Arc - hope that the caller uses a MOVS PC soon
+ * after!
+ */
+	.macro	restore_irqs, oldcpsr
+  @ This be restore_irqs
+  .endm
+
+/*
+ * These two are used to save LR/restore PC over a user-based access.
+ * The old 26-bit architecture requires that we save lr (R14)
+ */
+	.macro	save_lr
+	str	lr, [sp, #-4]!
+	.endm
+
+	.macro	restore_pc
+	ldmfd	sp!, {pc}^
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous
+
+
diff --git a/include/asm-arm26/atomic.h b/include/asm-arm26/atomic.h
new file mode 100644
index 000000000000..4a88235c0e76
--- /dev/null
+++ b/include/asm-arm26/atomic.h
@@ -0,0 +1,93 @@
+/*
+ *  linux/include/asm-arm26/atomic.h
+ *
+ *  Copyright (c) 1996 Russell King.
+ *  Modified for arm26 by Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   25-11-2004 IM	Updated for 2.6.9
+ *   27-06-1996	RMK	Created
+ *   13-04-1997	RMK	Made functions atomic!
+ *   07-12-1997	RMK	Upgraded for v2.1.
+ *   26-08-1998	PJB	Added #ifdef __KERNEL__
+ *
+ *  FIXME - its probably worth seeing what these compile into...
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#error SMP is NOT supported
+#endif
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+#include <asm/system.h>
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int val;
+
+        local_irq_save(flags);
+        val = v->counter;
+        v->counter = val += i;
+        local_irq_restore(flags);
+
+        return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int val;
+
+        local_irq_save(flags);
+        val = v->counter;
+        v->counter = val -= i;
+        local_irq_restore(flags);
+
+        return val;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+        *addr &= ~mask;
+        local_irq_restore(flags);
+}
+
+#define atomic_add(i, v)        (void) atomic_add_return(i, v)
+#define atomic_inc(v)           (void) atomic_add_return(1, v)
+#define atomic_sub(i, v)        (void) atomic_sub_return(i, v)
+#define atomic_dec(v)           (void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v)  (atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)  (atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM26 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif
+#endif
diff --git a/include/asm-arm26/bitops.h b/include/asm-arm26/bitops.h
new file mode 100644
index 000000000000..7d062fb2e343
--- /dev/null
+++ b/include/asm-arm26/bitops.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright 1995, Russell King.
+ *
+ * Based on the arm32 version by RMK (and others). Their copyrights apply to
+ * Those parts.
+ * Modified for arm26 by Ian Molton on 25/11/04
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit()	do { } while (0)
+#define smp_mb__after_clear_bit()	do { } while (0)
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p |= mask;
+	local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	*p ^= mask;
+	local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res | mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res & ~mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	local_irq_save(flags);
+	res = *p;
+	*p = res ^ mask;
+	local_irq_restore(flags);
+
+	return res & mask;
+}
+
+/*
+ * Now the non-atomic variants.  We let the compiler handle all
+ * optimisations for these.  These are all _native_ endian.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] |= (1UL << (nr & 31));
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] &= ~(1UL << (nr & 31));
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *p)
+{
+	p[nr >> 5] ^= (1UL << (nr & 31));
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval | mask;
+	return oldval & mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval & ~mask;
+	return oldval & mask;
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *p)
+{
+	unsigned long oldval, mask = 1UL << (nr & 31);
+
+	p += nr >> 5;
+
+	oldval = *p;
+	*p = oldval ^ mask;
+	return oldval & mask;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __test_bit(int nr, const volatile unsigned long * p)
+{
+	return (p[nr >> 5] >> (nr & 31)) & 1UL;
+}
+
+/*
+ * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(void * p, unsigned size);
+extern int _find_next_zero_bit_le(void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define	ATOMIC_BITOP_LE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_le(nr,p))
+
+#define NONATOMIC_BITOP(name,nr,p)		\
+	(____nonatomic_##name(nr, p))
+
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define test_bit(nr,p)			__test_bit(nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x))
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	int k;
+
+	word = ~word;
+	k = 31;
+	if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+	if (word & 0x00ff0000) { k -= 8;  word <<= 8;  }
+	if (word & 0x0f000000) { k -= 4;  word <<= 4;  }
+	if (word & 0x30000000) { k -= 2;  word <<= 2;  }
+	if (word & 0x40000000) { k -= 1; }
+        return k;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	int k;
+
+	k = 31;
+	if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+	if (word & 0x00ff0000) { k -= 8;  word <<= 8;  }
+	if (word & 0x0f000000) { k -= 4;  word <<= 4;  }
+	if (word & 0x30000000) { k -= 2;  word <<= 2;  }
+	if (word & 0x40000000) { k -= 1; }
+        return k;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * Find first bit set in a 168-bit bitmap, where the first
+ * 128 bits are unlikely to be set.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	unsigned long v;
+	unsigned int off;
+
+	for (off = 0; v = b[off], off < 4; off++) {
+		if (unlikely(v))
+			break;
+	}
+	return __ffs(v) + off * 32;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p)			\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p)          \
+                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p)			\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p)        \
+                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p)			\
+		__test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off)	\
+		_find_next_zero_bit_le(p,sz,off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p)			\
+		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p)			\
+		__test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p)		\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p)		\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm26/bug.h b/include/asm-arm26/bug.h
new file mode 100644
index 000000000000..920b70533368
--- /dev/null
+++ b/include/asm-arm26/bug.h
@@ -0,0 +1,17 @@
+#ifndef _ASMARM_BUG_H
+#define _ASMARM_BUG_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern volatile void __bug(const char *file, int line, void *data);
+/* give file/line information */
+#define BUG()		__bug(__FILE__, __LINE__, NULL)
+#else
+#define BUG()		(*(int *)0 = 0)
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-arm26/bugs.h b/include/asm-arm26/bugs.h
new file mode 100644
index 000000000000..e99ac2e46d7f
--- /dev/null
+++ b/include/asm-arm26/bugs.h
@@ -0,0 +1,15 @@
+/*
+ *  linux/include/asm-arm26/bugs.h
+ *
+ *  Copyright (C) 1995  Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+#define check_bugs() cpu_check_bugs()
+
+#endif
diff --git a/include/asm-arm26/byteorder.h b/include/asm-arm26/byteorder.h
new file mode 100644
index 000000000000..0b4af9ac76e9
--- /dev/null
+++ b/include/asm-arm26/byteorder.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
diff --git a/include/asm-arm26/cache.h b/include/asm-arm26/cache.h
new file mode 100644
index 000000000000..f52ca1b808cd
--- /dev/null
+++ b/include/asm-arm26/cache.h
@@ -0,0 +1,11 @@
+/*
+ *  linux/include/asm-arm26/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define        L1_CACHE_BYTES  32
+#define        L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define        SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#endif
diff --git a/include/asm-arm26/cacheflush.h b/include/asm-arm26/cacheflush.h
new file mode 100644
index 000000000000..9c1b9c7f2ebd
--- /dev/null
+++ b/include/asm-arm26/cacheflush.h
@@ -0,0 +1,52 @@
+/*
+ *  linux/include/asm-arm/cacheflush.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *  Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM26 cache 'functions'
+ *
+ */
+
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#if 1     //FIXME - BAD INCLUDES!!!
+#include <linux/sched.h>
+#include <linux/mm.h>
+#endif
+
+#define flush_cache_all()                       do { } while (0)
+#define flush_cache_mm(mm)                      do { } while (0)
+#define flush_cache_range(vma,start,end)        do { } while (0)
+#define flush_cache_page(vma,vmaddr,pfn)        do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define invalidate_dcache_range(start,end)      do { } while (0)
+#define clean_dcache_range(start,end)           do { } while (0)
+#define flush_dcache_range(start,end)           do { } while (0)
+#define flush_dcache_page(page)                 do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define clean_dcache_entry(_s)                  do { } while (0)
+#define clean_cache_entry(_start)               do { } while (0)
+
+#define flush_icache_user_range(start,end, bob, fred) do { } while (0)
+#define flush_icache_range(start,end)           do { } while (0)
+#define flush_icache_page(vma,page)             do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+/* DAG: ARM3 will flush cache on MEMC updates anyway? so don't bother */
+/* IM : Yes, it will, but only if setup to do so (we do this). */
+#define clean_cache_area(_start,_size)          do { } while (0)
+
+#endif
diff --git a/include/asm-arm26/checksum.h b/include/asm-arm26/checksum.h
new file mode 100644
index 000000000000..d4256d5f3a7c
--- /dev/null
+++ b/include/asm-arm26/checksum.h
@@ -0,0 +1,160 @@
+/*
+ *  linux/include/asm-arm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int
+csum_partial_copy_nocheck(const char *src, char *dst, int len, int sum);
+
+unsigned int
+csum_partial_copy_from_user(const char __user *src, char *dst, int len, int sum, int *err_ptr);
+
+/*
+ * This is the old (and unsafe) way of doing checksums, a warning message will
+ * be printed if it is used and an exception occurs.
+ *
+ * this functions should go away after some time.
+ */
+#define csum_partial_copy(src,dst,len,sum)	csum_partial_copy_nocheck(src,dst,len,sum)
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline unsigned short
+ip_fast_csum(unsigned char * iph, unsigned int ihl)
+{
+	unsigned int sum, tmp1;
+
+	__asm__ __volatile__(
+	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
+	ldr	%3, [%1], #4					\n\
+	sub	%2, %2, #5					\n\
+	adds	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+1:	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	tst	%2, #15			@ do this carefully	\n\
+	subne	%2, %2, #1		@ without destroying	\n\
+	bne	1b			@ the carry flag	\n\
+	adcs	%0, %0, %3					\n\
+	adc	%0, %0, #0					\n\
+	adds	%0, %0, %0, lsl #16				\n\
+	addcs	%0, %0, #0x10000				\n\
+	mvn	%0, %0						\n\
+	mov	%0, %0, lsr #16"
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+	: "1" (iph), "2" (ihl)
+	: "cc");
+	return sum;
+}
+
+/*
+ * 	Fold a partial checksum without adding pseudo headers
+ */
+static inline unsigned int
+csum_fold(unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %1, lsl #16	@ csum_fold		\n\
+	addcs	%0, %0, #0x10000"
+	: "=r" (sum)
+	: "r" (sum)
+	: "cc");
+	return (~sum) >> 16;
+}
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		   unsigned int proto, unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
+	adcs	%0, %0, %3					\n\
+	adcs	%0, %0, %4					\n\
+	adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+	: "cc");
+	return sum;
+}	
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned int proto, unsigned int sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_magic	\n\
+	adcs	%0, %0, %3					\n\
+	adcs	%0, %0, %4					\n\
+	adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0					\n\
+	adds	%0, %0, %0, lsl #16				\n\
+	addcs	%0, %0, #0x10000				\n\
+	mvn	%0, %0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+	: "cc");
+	return sum >> 16;
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short
+ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern unsigned long
+__csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+		__u32 proto, unsigned int sum);
+
+static inline unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+		unsigned short proto, unsigned int sum)
+{
+	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+					   htonl(proto), sum));
+}
+#endif
diff --git a/include/asm-arm26/constants.h b/include/asm-arm26/constants.h
new file mode 100644
index 000000000000..0d0b14415563
--- /dev/null
+++ b/include/asm-arm26/constants.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by arch/arm26/Makefile
+ *
+ */
+
+#define TSK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */
+
+#define VMA_VM_MM 0 /* offsetof(struct vm_area_struct, vm_mm) */
+#define VMA_VM_FLAGS 20 /* offsetof(struct vm_area_struct, vm_flags) */
+
+#define VM_EXEC 4 /* VM_EXEC */
+
+
+#define PAGE_PRESENT 1 /* L_PTE_PRESENT */
+#define PAGE_READONLY 95 /* PAGE_READONLY */
+#define PAGE_NOT_USER 3 /* PAGE_NONE */
+#define PAGE_OLD 3 /* PAGE_NONE */
+#define PAGE_CLEAN 128 /* L_PTE_DIRTY */
+
+#define PAGE_SZ 32768 /* PAGE_SIZE */
+
+#define SYS_ERROR0 10420224 /* 0x9f0000 */
+
+#endif
diff --git a/include/asm-arm26/cputime.h b/include/asm-arm26/cputime.h
new file mode 100644
index 000000000000..d2783a9e47b3
--- /dev/null
+++ b/include/asm-arm26/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ARM26_CPUTIME_H
+#define __ARM26_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ARM26_CPUTIME_H */
diff --git a/include/asm-arm26/current.h b/include/asm-arm26/current.h
new file mode 100644
index 000000000000..75d21e2a3ff7
--- /dev/null
+++ b/include/asm-arm26/current.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_CURRENT_H
+#define _ASMARM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+static inline struct task_struct *get_current(void) __attribute_const__;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASMARM_CURRENT_H */
diff --git a/include/asm-arm26/delay.h b/include/asm-arm26/delay.h
new file mode 100644
index 000000000000..40fbf7bbe6c2
--- /dev/null
+++ b/include/asm-arm26/delay.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_ARM_DELAY_H
+#define __ASM_ARM_DELAY_H
+
+/*
+ * Copyright (C) 1995 Russell King
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+extern void __delay(int loops);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ *
+ * FIXME - lets improve it then...
+ */
+extern void udelay(unsigned long usecs);
+
+static inline unsigned long muldiv(unsigned long a, unsigned long b, unsigned long c)
+{
+	return a * b / c;
+}
+
+	
+
+#endif /* defined(_ARM_DELAY_H) */
+
diff --git a/include/asm-arm26/div64.h b/include/asm-arm26/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-arm26/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-arm26/dma-mapping.h b/include/asm-arm26/dma-mapping.h
new file mode 100644
index 000000000000..a95eae0aeb77
--- /dev/null
+++ b/include/asm-arm26/dma-mapping.h
@@ -0,0 +1,2 @@
+#include <asm-generic/dma-mapping-broken.h>
+
diff --git a/include/asm-arm26/dma.h b/include/asm-arm26/dma.h
new file mode 100644
index 000000000000..995e223e43a1
--- /dev/null
+++ b/include/asm-arm26/dma.h
@@ -0,0 +1,184 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/scatterlist.h>
+
+// FIXME - do we really need this? arm26 cant do 'proper' DMA
+
+typedef struct dma_struct dma_t;
+typedef unsigned int dmamode_t;
+
+struct dma_ops {
+        int     (*request)(dmach_t, dma_t *);           /* optional */
+        void    (*free)(dmach_t, dma_t *);              /* optional */
+        void    (*enable)(dmach_t, dma_t *);            /* mandatory */
+        void    (*disable)(dmach_t, dma_t *);           /* mandatory */
+        int     (*residue)(dmach_t, dma_t *);           /* optional */
+        int     (*setspeed)(dmach_t, dma_t *, int);     /* optional */
+        char    *type;
+};
+
+struct dma_struct {
+        struct scatterlist buf;         /* single DMA                   */
+        int             sgcount;        /* number of DMA SG             */
+        struct scatterlist *sg;         /* DMA Scatter-Gather List      */
+
+        unsigned int    active:1;       /* Transfer active              */
+        unsigned int    invalid:1;      /* Address/Count changed        */
+        unsigned int    using_sg:1;     /* using scatter list?          */
+        dmamode_t       dma_mode;       /* DMA mode                     */
+        int             speed;          /* DMA speed                    */
+
+        unsigned int    lock;           /* Device is allocated          */
+        const char      *device_id;     /* Device name                  */
+
+        unsigned int    dma_base;       /* Controller base address      */
+        int             dma_irq;        /* Controller IRQ               */
+        int             state;          /* Controller state             */
+        struct scatterlist cur_sg;      /* Current controller buffer    */
+
+        struct dma_ops  *d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose  : Initialise architecture specific DMA
+ * Params   : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
+
+
+#define MAX_DMA_ADDRESS         0x03000000
+#define MAX_DMA_CHANNELS        3
+
+/* ARC */
+#define DMA_VIRTUAL_FLOPPY0     0
+#define DMA_VIRTUAL_FLOPPY1     1
+#define DMA_VIRTUAL_SOUND       2
+
+/* A5K */
+#define DMA_FLOPPY              0
+
+/*
+ * DMA modes
+ */
+#define DMA_MODE_MASK	3
+
+#define DMA_MODE_READ	 0
+#define DMA_MODE_WRITE	 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT	 4
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ *       be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int  request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_addr(dmach_t channel, unsigned long physaddr);
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int  get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA	255
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h
new file mode 100644
index 000000000000..66691939c3c1
--- /dev/null
+++ b/include/asm-arm26/ecard.h
@@ -0,0 +1,294 @@
+/*
+ * linux/include/asm-arm26/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ *  11-12-1996	RMK	Further minor improvements
+ *  12-09-1997	RMK	Added interrupt enable/disable for card level
+ *  18-05-2003  IM      Adjusted for ARM26
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ *                        Manufacturer  Product ID
+ */
+#define MANU_ACORN		0x0000
+#define PROD_ACORN_SCSI			0x0002
+#define PROD_ACORN_ETHER1		0x0003
+#define PROD_ACORN_MFM			0x000b
+
+#define MANU_CCONCEPTS		0x0009
+#define PROD_CCONCEPTS_COLOURCARD	0x0050
+
+#define MANU_ANT2		0x0011
+#define PROD_ANT_ETHER3			0x00a4
+
+#define MANU_ATOMWIDE		0x0017
+#define PROD_ATOMWIDE_3PSERIAL		0x0090
+
+#define MANU_IRLAM_INSTRUMENTS	0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
+
+#define MANU_OAK		0x0021
+#define PROD_OAK_SCSI			0x0058
+
+#define MANU_MORLEY		0x002b
+#define PROD_MORLEY_SCSI_UNCACHED	0x0067
+
+#define MANU_CUMANA		0x003a
+#define PROD_CUMANA_SCSI_2		0x003a
+#define PROD_CUMANA_SCSI_1		0x00a0
+
+#define MANU_ICS		0x003c
+#define PROD_ICS_IDE			0x00ae
+
+#define MANU_ICS2		0x003d
+#define PROD_ICS2_IDE			0x00ae
+
+#define MANU_SERPORT		0x003f
+#define PROD_SERPORT_DSPORT		0x00b9
+
+#define MANU_ARXE		0x0041
+#define PROD_ARXE_SCSI			0x00be
+
+#define MANU_I3			0x0046
+#define PROD_I3_ETHERLAN500		0x00d4
+#define PROD_I3_ETHERLAN600		0x00ec
+#define PROD_I3_ETHERLAN600A		0x011e
+
+#define MANU_ANT		0x0053
+#define PROD_ANT_ETHERM			0x00d8
+#define PROD_ANT_ETHERB			0x00e4
+
+#define MANU_ALSYSTEMS		0x005b
+#define PROD_ALSYS_SCSIATAPI		0x0107
+
+#define MANU_MCS		0x0063
+#define PROD_MCS_CONNECT32		0x0125
+
+#define MANU_EESOX		0x0064
+#define PROD_EESOX_SCSI2		0x008c
+
+#define MANU_YELLOWSTONE	0x0096
+#define PROD_YELLOWSTONE_RAPIDE32	0x0120
+
+#define MANU_SIMTEC             0x005f
+#define PROD_SIMTEC_IDE8                0x0130
+#define PROD_SIMTEC_IDE16               0x0131
+
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS	4
+
+typedef enum {				/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;
+
+struct ecard_id {			/* Card ID structure		*/
+	unsigned short	manufacturer;
+	unsigned short	product;
+	void		*data;
+};
+
+struct in_ecid {			/* Packed card ID information	*/
+	unsigned short	product;	/* Product code			*/
+	unsigned short	manufacturer;	/* Manufacturer code		*/
+	unsigned char	id:4;		/* Simple ID			*/
+	unsigned char	cd:1;		/* Chunk dir present		*/
+	unsigned char	is:1;		/* Interrupt status pointers	*/
+	unsigned char	w:2;		/* Width			*/
+	unsigned char	country;	/* Country			*/
+	unsigned char	irqmask;	/* IRQ mask			*/
+	unsigned char	fiqmask;	/* FIQ mask			*/
+	unsigned long	irqoff;		/* IRQ offset			*/
+	unsigned long	fiqoff;		/* FIQ offset			*/
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct {			/* Card handler routines	*/
+	void (*irqenable)(ecard_t *ec, int irqnr);
+	void (*irqdisable)(ecard_t *ec, int irqnr);
+	int  (*irqpending)(ecard_t *ec);
+	void (*fiqenable)(ecard_t *ec, int fiqnr);
+	void (*fiqdisable)(ecard_t *ec, int fiqnr);
+	int  (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES	(6)
+
+#define ECARD_RES_IOCSLOW	(0)
+#define ECARD_RES_IOCMEDIUM	(1)
+#define ECARD_RES_IOCFAST	(2)
+#define ECARD_RES_IOCSYNC	(3)
+#define ECARD_RES_MEMC		(4)
+#define ECARD_RES_EASI		(5)
+
+#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
+					 (ec)->resource[nr].start + 1)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+	struct expansion_card  *next;
+
+	struct device		dev;
+	struct resource		resource[ECARD_NUM_RESOURCES];
+
+	/* Public data */
+	volatile unsigned char *irqaddr;     /* address of IRQ register */
+	volatile unsigned char *fiqaddr;     /* address of FIQ register */
+	unsigned char		irqmask;     /* IRQ mask */
+	unsigned char		fiqmask;     /* FIQ mask */
+	unsigned char  		claimed;     /* Card claimed? */
+
+	void			*irq_data;   /* Data for use for IRQ by card */
+	void			*fiq_data;   /* Data for use for FIQ by card */
+	const expansioncard_ops_t *ops;	     /* Enable/Disable Ops for card */
+
+	CONST unsigned int	slot_no;     /* Slot number */
+	CONST unsigned int	dma;         /* DMA number (for request_dma) */
+	CONST unsigned int	irq;         /* IRQ number (for request_irq) */
+	CONST unsigned int	fiq;         /* FIQ number (for request_irq) */
+	CONST card_type_t	type;        /* Type of card */
+	CONST struct in_ecid	cid;         /* Card Identification */
+
+	/* Private internal data */
+	const char		*card_desc;  /* Card description */
+	CONST unsigned int	podaddr;     /* Base Linux address for card */
+	CONST loader_t		loader;      /* loader program */
+	u64			dma_mask;
+};
+
+struct in_chunk_dir {
+	unsigned int start_offset;
+	union {
+		unsigned char string[256];
+		unsigned char data[1];
+	} d;
+};
+
+/*
+ * ecard_claim: claim an expansion card entry
+ * FIXME - are these atomic / called with interrupts off ?
+ */
+#define ecard_claim(ec) ((ec)->claimed = 1)
+
+/*
+ * ecard_release: release an expansion card entry
+ */
+#define ecard_release(ec) ((ec)->claimed = 0)
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Obtain the address of a card
+ */
+extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
+
+#ifdef ECARD_C
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+	unsigned char	r_irq:1;
+	unsigned char	r_zero:1;
+	unsigned char	r_fiq:1;
+	unsigned char	r_id:4;
+	unsigned char	r_a:1;
+
+	unsigned char	r_cd:1;
+	unsigned char	r_is:1;
+	unsigned char	r_w:2;
+	unsigned char	r_r1:4;
+
+	unsigned char	r_r2:8;
+
+	unsigned char	r_prod[2];
+
+	unsigned char	r_manu[2];
+
+	unsigned char	r_country;
+
+	unsigned char	r_irqmask;
+	unsigned char	r_irqoff[3];
+
+	unsigned char	r_fiqmask;
+	unsigned char	r_fiqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+	unsigned char r_id;
+	unsigned char r_len[3];
+	unsigned long r_start;
+	union {
+		char string[256];
+		char data[1];
+	} d;
+#define c_id(x)		((x)->r_id)
+#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x)	((x)->r_start)
+};
+
+#endif
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
+	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
+	const struct ecard_id	*id_table;
+	unsigned int		id;
+	struct device_driver	drv;
+};
+
+#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif
diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h
new file mode 100644
index 000000000000..8b149474db24
--- /dev/null
+++ b/include/asm-arm26/elf.h
@@ -0,0 +1,77 @@
+#ifndef __ASMARM_ELF_H
+#define __ASMARM_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/procinfo.h>
+
+//FIXME - is it always 32K ?
+
+#define ELF_EXEC_PAGESIZE       32768
+#define SET_PERSONALITY(ex,ibcs2) set_personality(PER_LINUX)
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct { void *null; } elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ * We can only execute 26-bit code.
+ */
+
+#define EM_ARM	40
+#define EF_ARM_APCS26 0x08
+
+//#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && ((x)->e_flags & EF_ARM_APCS26) )      FIXME!!!!! - this looks OK, but the flags seem to be wrong.
+#define elf_check_arch(x) (1)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB;
+#define ELF_ARCH	EM_ARM
+
+#define USE_ELF_CORE_DUMP
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be 
+   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
+   have no such handler.  */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports. */
+
+extern unsigned int elf_hwcap;
+#define ELF_HWCAP	(elf_hwcap)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+/* For now we just provide a fairly general string that describes the
+   processor family.  This could be made more specific later if someone
+   implemented optimisations that require it.  26-bit CPUs give you
+   "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+   supported).
+ */
+
+#define ELF_PLATFORM_SIZE 8
+extern char elf_platform[];
+#define ELF_PLATFORM	(elf_platform)
+
+#endif
diff --git a/include/asm-arm26/errno.h b/include/asm-arm26/errno.h
new file mode 100644
index 000000000000..6e60f0612bb6
--- /dev/null
+++ b/include/asm-arm26/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-arm26/fcntl.h b/include/asm-arm26/fcntl.h
new file mode 100644
index 000000000000..485b6bdf4d7a
--- /dev/null
+++ b/include/asm-arm26/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif
diff --git a/include/asm-arm26/fiq.h b/include/asm-arm26/fiq.h
new file mode 100644
index 000000000000..a3bad09e825c
--- /dev/null
+++ b/include/asm-arm26/fiq.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-arm/fiq.h
+ *
+ * Support for FIQ on ARM architectures.
+ * Written by Philip Blundell <philb@gnu.org>, 1998
+ * Re-written by Russell King
+ */
+
+#ifndef __ASM_FIQ_H
+#define __ASM_FIQ_H
+
+#include <asm/ptrace.h>
+
+struct fiq_handler {
+	struct fiq_handler *next;
+	/* Name
+	 */
+	const char *name;
+	/* Called to ask driver to relinquish/
+	 * reacquire FIQ
+	 * return zero to accept, or -<errno>
+	 */
+	int (*fiq_op)(void *, int relinquish);
+	/* data for the relinquish/reacquire functions
+	 */
+	void *dev_id;
+};
+
+extern int claim_fiq(struct fiq_handler *f);
+extern void release_fiq(struct fiq_handler *f);
+extern void set_fiq_handler(void *start, unsigned int length);
+extern void set_fiq_regs(struct pt_regs *regs);
+extern void get_fiq_regs(struct pt_regs *regs);
+extern void enable_fiq(int fiq);
+extern void disable_fiq(int fiq);
+
+#endif
diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h
new file mode 100644
index 000000000000..9e090ad7e477
--- /dev/null
+++ b/include/asm-arm26/floppy.h
@@ -0,0 +1,141 @@
+/*
+ *  linux/include/asm-arm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+#define fd_enable_dma()		enable_dma(DMA_FLOPPY)
+#define fd_clear_dma_ff()	clear_dma_ff(DMA_FLOPPY)
+#define fd_set_dma_mode(mode)	set_dma_mode(DMA_FLOPPY, (mode))
+#define fd_set_dma_addr(addr)	set_dma_addr(DMA_FLOPPY, virt_to_bus((addr)))
+#define fd_set_dma_count(len)	set_dma_count(DMA_FLOPPY, (len))
+#define fd_cacheflush(addr,sz)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif
diff --git a/include/asm-arm26/fpstate.h b/include/asm-arm26/fpstate.h
new file mode 100644
index 000000000000..785749b3c5ab
--- /dev/null
+++ b/include/asm-arm26/fpstate.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/include/asm-arm/fpstate.h
+ *
+ *  Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FPSTATE_H
+#define __ASM_ARM_FPSTATE_H
+
+#define FP_SIZE 35
+
+struct fp_hard_struct {
+	unsigned int save[FP_SIZE];		/* as yet undefined */
+};
+
+struct fp_soft_struct {
+	unsigned int save[FP_SIZE];		/* undefined information */
+};
+
+union fp_state {
+	struct fp_hard_struct	hard;
+	struct fp_soft_struct	soft;
+};
+
+#endif
diff --git a/include/asm-arm26/hardirq.h b/include/asm-arm26/hardirq.h
new file mode 100644
index 000000000000..791ee1da9bfa
--- /dev/null
+++ b/include/asm-arm26/hardirq.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#define irq_enter()		(preempt_count() += HARDIRQ_OFFSET)
+
+#ifndef CONFIG_SMP
+
+extern asmlinkage void __do_softirq(void);
+
+#define irq_exit()                                                      \
+        do {                                                            \
+                preempt_count() -= IRQ_EXIT_OFFSET;                     \
+                if (!in_interrupt() && local_softirq_pending())         \
+                        __do_softirq();                                 \
+                preempt_enable_no_resched();                            \
+        } while (0)
+#endif
+
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h
new file mode 100644
index 000000000000..82fc55e2a009
--- /dev/null
+++ b/include/asm-arm26/hardware.h
@@ -0,0 +1,110 @@
+/*
+ *  linux/include/asm-arm/arch-arc/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the
+ *  Acorn Archimedes/A5000 machines.
+ *
+ *  Modifications:
+ *   04-04-1998	PJB/RMK	Merged arc and a5k versions
+ */
+#ifndef __ASM_HARDWARE_H
+#define __ASM_HARDWARE_H
+
+#include <linux/config.h>
+
+
+/*
+ * What hardware must be present - these can be tested by the kernel
+ * source.
+ */
+#define HAS_IOC
+#define HAS_MEMC
+#define HAS_VIDC
+
+#define VDMA_ALIGNMENT  PAGE_SIZE
+#define VDMA_XFERSIZE   16
+#define VDMA_INIT       0
+#define VDMA_START      1
+#define VDMA_END        2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset)                         \
+do {                                                            \
+        memc_write (VDMA_START, (start >> 2));                  \
+        memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);      \
+        memc_write (VDMA_INIT, (offset >> 2));                  \
+} while (0)
+#endif
+
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define IO_START		0x03000000
+#define IO_SIZE			0x01000000
+#define IO_BASE			0x03000000
+
+/*
+ * Screen mapping information
+ */
+#define SCREEN_START		0x02000000
+#define SCREEN_END		0x02078000
+#define SCREEN_SIZE		0x00078000
+#define SCREEN_BASE		0x02000000
+
+
+#define EXPMASK_BASE		0x03360000
+#define IOEB_BASE		0x03350000
+#define VIDC_BASE		0x03400000
+#define LATCHA_BASE		0x03250040
+#define LATCHB_BASE		0x03250018
+#define IOC_BASE		0x03200000
+#define FLOPPYDMA_BASE		0x0302a000
+#define PCIO_BASE		0x03010000
+
+// FIXME - are the below correct?
+#define PODSLOT_IOC0_BASE       0x03240000
+#define PODSLOT_IOC_SIZE        (1 << 14)
+#define PODSLOT_MEMC_BASE       0x03000000
+#define PODSLOT_MEMC_SIZE       (1 << 14)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * for use with inb/outb
+ */
+#define IOEB_VID_CTL		(IOEB_BASE + 0x48)
+#define IOEB_PRESENT		(IOEB_BASE + 0x50)
+#define IOEB_PSCLR		(IOEB_BASE + 0x58)
+#define IOEB_MONTYPE		(IOEB_BASE + 0x70)
+
+//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here...
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC_BASE		0x80000000
+
+#ifdef CONFIG_ARCH_ARC
+/* A680 hardware */
+#define WD1973_BASE		0x03290000
+#define WD1973_LATCH		0x03350000
+#define Z8530_BASE		0x032b0008
+#define SCSI_BASE		0x03100000
+#endif
+
+#endif
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/include/asm-arm26/hdreg.h b/include/asm-arm26/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-arm26/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-arm26/ide.h b/include/asm-arm26/ide.h
new file mode 100644
index 000000000000..db804d751df9
--- /dev/null
+++ b/include/asm-arm26/ide.h
@@ -0,0 +1,34 @@
+/*
+ *  linux/include/asm-arm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the i386 architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4
+#endif
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+/* JMA 18.05.03 these will never be needed, but the kernel needs them to compile */
+#define __ide_mm_insw(port,addr,len)    readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)    readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)   writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)   writesl(port,addr,len)
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	(0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm26/io.h b/include/asm-arm26/io.h
new file mode 100644
index 000000000000..02f94d88a124
--- /dev/null
+++ b/include/asm-arm26/io.h
@@ -0,0 +1,435 @@
+/*
+ *  linux/include/asm-arm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+
+extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
+#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
+
+#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
+#define __raw_readw(a)          (*(volatile unsigned short *)(a))
+#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
+
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)                   \
+ ({                                             \
+        unsigned int v, r = (b);                \
+        __asm__ __volatile__(                   \
+                "ldrb   %0, [%1, %2]"           \
+                : "=r" (v)                      \
+                : "r" (r), "Ir" (o));           \
+        v;                                      \
+ })
+
+#define __arch_base_getl(b,o)                   \
+ ({                                             \
+        unsigned int v, r = (b);                \
+        __asm__ __volatile__(                   \
+                "ldr    %0, [%1, %2]"           \
+                : "=r" (v)                      \
+                : "r" (r), "Ir" (o));           \
+        v;                                      \
+ })
+
+#define __arch_base_putb(v,b,o)                 \
+ ({                                             \
+        unsigned int r = (b);                   \
+        __asm__ __volatile__(                   \
+                "strb   %0, [%1, %2]"           \
+                :                               \
+                : "r" (v), "r" (r), "Ir" (o));  \
+ })
+
+#define __arch_base_putl(v,b,o)                 \
+ ({                                             \
+        unsigned int r = (b);                   \
+        __asm__ __volatile__(                   \
+                "str    %0, [%1, %2]"           \
+                :                               \
+                : "r" (v), "r" (r), "Ir" (o));  \
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)  (!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+        unsigned long temp;
+        __asm__ __volatile__(
+        "tst    %2, #0x80000000\n\t"
+        "mov    %0, %4\n\t"
+        "addeq  %0, %0, %3\n\t"
+        "strb   %1, [%0, %2, lsl #2]    @ outb"
+        : "=&r" (temp)
+        : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+        : "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+        unsigned long temp;
+        __asm__ __volatile__(
+        "tst    %2, #0x80000000\n\t"
+        "mov    %0, %4\n\t"
+        "addeq  %0, %0, %3\n\t"
+        "str    %1, [%0, %2, lsl #2]    @ outw"
+        : "=&r" (temp)
+        : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+        : "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+        unsigned long temp;
+        __asm__ __volatile__(
+        "tst    %2, #0x80000000\n\t"
+        "mov    %0, %4\n\t"
+        "addeq  %0, %0, %3\n\t"
+        "str    %1, [%0, %2, lsl #2]    @ outl"
+        : "=&r" (temp)
+        : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+        : "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)                                       \
+static inline unsigned sz __in##fnsuffix (unsigned int port)            \
+{                                                                               \
+        unsigned long temp, value;                                              \
+        __asm__ __volatile__(                                                   \
+        "tst    %2, #0x80000000\n\t"                                            \
+        "mov    %0, %4\n\t"                                                     \
+        "addeq  %0, %0, %3\n\t"                                                 \
+        "ldr" instr "   %1, [%0, %2, lsl #2]    @ in" #fnsuffix                 \
+        : "=&r" (temp), "=r" (value)                                            \
+        : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)                \
+        : "cc");                                                                \
+        return (unsigned sz)value;                                              \
+}
+
+static inline unsigned int __ioaddr (unsigned int port)                 \
+{                                                                               \
+        if (__PORT_PCIO(port))                                                  \
+                return (unsigned int)(PCIO_BASE + (port << 2));                 \
+        else                                                                    \
+                return (unsigned int)(IO_BASE + (port << 2));                   \
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)   \
+        DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)                                                     \
+({                                                                              \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "strb   %0, [%1, %2]    @ outbc"                                \
+                : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));          \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "strb   %0, [%1, %2]    @ outbc"                                \
+                : : "r" (value), "r" (IO_BASE), "r" ((port) << 2));             \
+})
+
+#define __inbc(port)                                                            \
+({                                                                              \
+        unsigned char result;                                                   \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "ldrb   %0, [%1, %2]    @ inbc"                                 \
+                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "ldrb   %0, [%1, %2]    @ inbc"                                 \
+                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
+        result;                                                                 \
+})
+
+#define __outwc(value,port)                                                     \
+({                                                                              \
+        unsigned long v = value;                                                \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "str    %0, [%1, %2]    @ outwc"                                \
+                : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));        \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "str    %0, [%1, %2]    @ outwc"                                \
+                : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));           \
+})
+
+#define __inwc(port)                                                            \
+({                                                                              \
+        unsigned short result;                                                  \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "ldr    %0, [%1, %2]    @ inwc"                                 \
+                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "ldr    %0, [%1, %2]    @ inwc"                                 \
+                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
+        result & 0xffff;                                                        \
+})
+
+#define __outlc(value,port)                                                     \
+({                                                                              \
+        unsigned long v = value;                                                \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "str    %0, [%1, %2]    @ outlc"                                \
+                : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));              \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "str    %0, [%1, %2]    @ outlc"                                \
+                : : "r" (v), "r" (IO_BASE), "r" ((port) << 2));                 \
+})
+
+#define __inlc(port)                                                            \
+({                                                                              \
+        unsigned long result;                                                   \
+        if (__PORT_PCIO((port)))                                                \
+                __asm__ __volatile__(                                           \
+                "ldr    %0, [%1, %2]    @ inlc"                                 \
+                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
+        else                                                                    \
+                __asm__ __volatile__(                                           \
+                "ldr    %0, [%1, %2]    @ inlc"                                 \
+                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
+        result;                                                                 \
+})
+
+#define __ioaddrc(port)                                                         \
+({                                                                              \
+        unsigned long addr;                                                     \
+        if (__PORT_PCIO((port)))                                                \
+                addr = PCIO_BASE + ((port) << 2);                               \
+        else                                                                    \
+                addr = IO_BASE + ((port) << 2);                                 \
+        addr;                                                                   \
+})
+
+#define inb(p)          (__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)          (__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)          (__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)       (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)       (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)       (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)     (__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+
+/* JMA 18.02.03 added sb,sl from arm/io.h, changing io to ioaddr */
+
+#define outsb(p,d,l)            __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)            __raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)            __raw_writesl(__ioaddr(p),d,l)
+
+#define insb(p,d,l)             __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)             __raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)             __raw_readsl(__ioaddr(p),d,l)
+
+#define insw(p,d,l)     __raw_readsw(__ioaddr(p),d,l)
+#define outsw(p,d,l)    __raw_writesw(__ioaddr(p),d,l)
+
+#define readb(c)                        (__readwrite_bug("readb"),0)
+#define readw(c)                        (__readwrite_bug("readw"),0)
+#define readl(c)                        (__readwrite_bug("readl"),0)
+#define readb_relaxed(addr)		readb(addr)
+#define readw_relaxed(addr)		readw(addr)
+#define readl_relaxed(addr)		readl(addr)
+#define writeb(v,c)                     __readwrite_bug("writeb")
+#define writew(v,c)                     __readwrite_bug("writew")
+#define writel(v,c)                     __readwrite_bug("writel")
+
+#define readsw(p,d,l)                 (__readwrite_bug("readsw"),0)
+#define readsl(p,d,l)                 (__readwrite_bug("readsl"),0)
+#define writesw(p,d,l)                        __readwrite_bug("writesw")
+#define writesl(p,d,l)                        __readwrite_bug("writesl")
+
+#define mmiowb()
+
+/* the following macro is depreciated */
+#define ioaddr(port)                    __ioaddr((port))
+
+/*
+ * No ioremap support here.
+ */
+#define __arch_ioremap(c,s,f,a)   ((void *)(c))
+#define __arch_iounmap(c)       do { }  while (0)
+
+
+#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \
+    defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl)
+#warning machine class uses old __arch_putw or __arch_getw
+#endif
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ */
+/*
+#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
+*/
+#define outb_p(val,port)	outb((val),(port))
+#define outw_p(val,port)	outw((val),(port))
+#define inb_p(port)		inb((port))
+#define inw_p(port)		inw((port))
+#define inl_p(port)		inl((port))
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ */
+extern void * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
+extern void __iounmap(void *addr);
+
+#ifndef __arch_ioremap
+#define ioremap(cookie,size)		__ioremap(cookie,size,0,1)
+#define ioremap_nocache(cookie,size)	__ioremap(cookie,size,0,1)
+#define iounmap(cookie)			__iounmap(cookie)
+#else
+#define ioremap(cookie,size)		__arch_ioremap((cookie),(size),0,1)
+#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie),(size),0,1)
+#define iounmap(cookie)			__arch_iounmap(cookie)
+#endif
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_ARM_IO_H */
diff --git a/include/asm-arm26/ioc.h b/include/asm-arm26/ioc.h
new file mode 100644
index 000000000000..b3b46ef65943
--- /dev/null
+++ b/include/asm-arm26/ioc.h
@@ -0,0 +1,72 @@
+/*
+ *  linux/include/asm-arm/hardware/ioc.h
+ *
+ *  Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Use these macros to read/write the IOC.  All it does is perform the actual
+ *  read/write.
+ */
+#ifndef __ASMARM_HARDWARE_IOC_H
+#define __ASMARM_HARDWARE_IOC_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
+#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
+
+#endif
+
+#define IOC_CONTROL	(0x00)
+#define IOC_KARTTX	(0x04)
+#define IOC_KARTRX	(0x04)
+
+#define IOC_IRQSTATA	(0x10)
+#define IOC_IRQREQA	(0x14)
+#define IOC_IRQCLRA	(0x14)
+#define IOC_IRQMASKA	(0x18)
+
+#define IOC_IRQSTATB	(0x20)
+#define IOC_IRQREQB	(0x24)
+#define IOC_IRQMASKB	(0x28)
+
+#define IOC_FIQSTAT	(0x30)
+#define IOC_FIQREQ	(0x34)
+#define IOC_FIQMASK	(0x38)
+
+#define IOC_T0CNTL	(0x40)
+#define IOC_T0LTCHL	(0x40)
+#define IOC_T0CNTH	(0x44)
+#define IOC_T0LTCHH	(0x44)
+#define IOC_T0GO	(0x48)
+#define IOC_T0LATCH	(0x4c)
+
+#define IOC_T1CNTL	(0x50)
+#define IOC_T1LTCHL	(0x50)
+#define IOC_T1CNTH	(0x54)
+#define IOC_T1LTCHH	(0x54)
+#define IOC_T1GO	(0x58)
+#define IOC_T1LATCH	(0x5c)
+
+#define IOC_T2CNTL	(0x60)
+#define IOC_T2LTCHL	(0x60)
+#define IOC_T2CNTH	(0x64)
+#define IOC_T2LTCHH	(0x64)
+#define IOC_T2GO	(0x68)
+#define IOC_T2LATCH	(0x6c)
+
+#define IOC_T3CNTL	(0x70)
+#define IOC_T3LTCHL	(0x70)
+#define IOC_T3CNTH	(0x74)
+#define IOC_T3LTCHH	(0x74)
+#define IOC_T3GO	(0x78)
+#define IOC_T3LATCH	(0x7c)
+
+#endif
diff --git a/include/asm-arm26/ioctl.h b/include/asm-arm26/ioctl.h
new file mode 100644
index 000000000000..2cbb7d0e9dc6
--- /dev/null
+++ b/include/asm-arm26/ioctl.h
@@ -0,0 +1,74 @@
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASMARM_IOCTL_H
+#define _ASMARM_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASMARM_IOCTL_H */
diff --git a/include/asm-arm26/ioctls.h b/include/asm-arm26/ioctls.h
new file mode 100644
index 000000000000..ba9c7d81d24e
--- /dev/null
+++ b/include/asm-arm26/ioctls.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-arm26/ipc.h b/include/asm-arm26/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-arm26/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-arm26/ipcbuf.h b/include/asm-arm26/ipcbuf.h
new file mode 100644
index 000000000000..97683975f7df
--- /dev/null
+++ b/include/asm-arm26/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_IPCBUF_H
+#define __ASMARM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASMARM_IPCBUF_H */
diff --git a/include/asm-arm26/irq.h b/include/asm-arm26/irq.h
new file mode 100644
index 000000000000..06bd5a543d13
--- /dev/null
+++ b/include/asm-arm26/irq.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <asm/sysirq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+
+/* JMA 18.05.02 Copied off arch/arm/irq.h */
+#ifndef irq_canonicalize
+#define irq_canonicalize(i)     (i)
+#endif
+
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ	((unsigned int)(-1))
+#endif
+
+struct irqaction;
+
+#define disable_irq_nosync(i) disable_irq(i)
+
+extern void disable_irq(unsigned int);
+extern void enable_irq(unsigned int);
+
+#define __IRQT_FALEDGE	(1 << 0)
+#define __IRQT_RISEDGE	(1 << 1)
+#define __IRQT_LOWLVL	(1 << 2)
+#define __IRQT_HIGHLVL	(1 << 3)
+
+#define IRQT_NOEDGE	(0)
+#define IRQT_RISING	(__IRQT_RISEDGE)
+#define IRQT_FALLING	(__IRQT_FALEDGE)
+#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
+#define IRQT_LOW	(__IRQT_LOWLVL)
+#define IRQT_HIGH	(__IRQT_HIGHLVL)
+#define IRQT_PROBE	(1 << 4)
+
+int set_irq_type(unsigned int irq, unsigned int type);
+
+int setup_irq(unsigned int, struct irqaction *);
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
+
diff --git a/include/asm-arm26/irqchip.h b/include/asm-arm26/irqchip.h
new file mode 100644
index 000000000000..6a007a954098
--- /dev/null
+++ b/include/asm-arm26/irqchip.h
@@ -0,0 +1,101 @@
+/*
+ *  linux/include/asm-arm/mach/irq.h
+ *
+ *  Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+struct irqdesc;
+struct pt_regs;
+struct seq_file;
+
+typedef void (*irq_handler_t)(unsigned int, struct irqdesc *, struct pt_regs *);
+typedef void (*irq_control_t)(unsigned int);
+
+struct irqchip {
+	/*
+	 * Acknowledge the IRQ.
+	 * If this is a level-based IRQ, then it is expected to mask the IRQ
+	 * as well.
+	 */
+	void (*ack)(unsigned int);
+	/*
+	 * Mask the IRQ in hardware.
+	 */
+	void (*mask)(unsigned int);
+	/*
+	 * Unmask the IRQ in hardware.
+	 */
+	void (*unmask)(unsigned int);
+	/*
+	 * Re-run the IRQ
+	 */
+	void (*rerun)(unsigned int);
+	/*
+	 * Set the type of the IRQ.
+	 */
+	int (*type)(unsigned int, unsigned int);
+};
+
+struct irqdesc {
+	irq_handler_t	handle;
+	struct irqchip	*chip;
+	struct irqaction *action;
+
+	unsigned int	enabled  : 1;		/* IRQ is currently enabled   */
+	unsigned int	triggered: 1;		/* IRQ has occurred	      */
+	unsigned int	running  : 1;		/* IRQ is running             */
+	unsigned int	pending  : 1;		/* IRQ is pending	      */
+	unsigned int	probing  : 1;		/* IRQ in use for a probe     */
+	unsigned int	probe_ok : 1;		/* IRQ can be used for probe  */
+	unsigned int	valid    : 1;		/* IRQ claimable	      */
+	unsigned int	noautoenable : 1;	/* don't automatically enable IRQ */
+	unsigned int	unused   :23;
+	unsigned int	depth;			/* disable depth	      */
+
+	/*
+	 * IRQ lock detection
+	 */
+	unsigned int	lck_cnt;
+	unsigned int	lck_pc;
+	unsigned int	lck_jif;
+};
+
+extern struct irqdesc irq_desc[];
+
+/*
+ * This is internal.  Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+void __set_irq_handler(unsigned int irq, irq_handler_t, int);
+
+/*
+ * External stuff.
+ */
+#define set_irq_handler(irq,handler)		__set_irq_handler(irq,handler,0)
+#define set_irq_chained_handler(irq,handler)	__set_irq_handler(irq,handler,1)
+
+void set_irq_chip(unsigned int irq, struct irqchip *);
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+/*
+ * Built-in IRQ handlers.
+ */
+void do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void dummy_mask_unmask_irq(unsigned int irq);
+
+#endif
diff --git a/include/asm-arm26/kmap_types.h b/include/asm-arm26/kmap_types.h
new file mode 100644
index 000000000000..d5da712b723c
--- /dev/null
+++ b/include/asm-arm26/kmap_types.h
@@ -0,0 +1,12 @@
+#ifndef __ARM_KMAP_TYPES_H
+#define __ARM_KMAP_TYPES_H
+
+/*
+ * This is the "bare minimum".  AIO seems to require this.
+ */
+enum km_type {
+        KM_IRQ0,
+        KM_USER1
+};
+
+#endif
diff --git a/include/asm-arm26/leds.h b/include/asm-arm26/leds.h
new file mode 100644
index 000000000000..88ce4124f854
--- /dev/null
+++ b/include/asm-arm26/leds.h
@@ -0,0 +1,51 @@
+/*
+ *  linux/include/asm-arm/leds.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Event-driven interface for LEDs on machines
+ *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
+ */
+#ifndef ASM_ARM_LEDS_H
+#define ASM_ARM_LEDS_H
+
+#include <linux/config.h>
+
+typedef enum {
+	led_idle_start,
+	led_idle_end,
+	led_timer,
+	led_start,
+	led_stop,
+	led_claim,		/* override idle & timer leds */
+	led_release,		/* restore idle & timer leds */
+	led_start_timer_mode,
+	led_stop_timer_mode,
+	led_green_on,
+	led_green_off,
+	led_amber_on,
+	led_amber_off,
+	led_red_on,
+	led_red_off,
+	led_blue_on,
+	led_blue_off,
+	/*
+	 * I want this between led_timer and led_start, but
+	 * someone has decided to export this to user space
+	 */
+	led_halted
+} led_event_t;
+
+/* Use this routine to handle LEDs */
+
+#ifdef CONFIG_LEDS
+extern void (*leds_event)(led_event_t);
+#else
+#define leds_event(e)
+#endif
+
+#endif
diff --git a/include/asm-arm26/limits.h b/include/asm-arm26/limits.h
new file mode 100644
index 000000000000..08d8c6600804
--- /dev/null
+++ b/include/asm-arm26/limits.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_PIPE_H
+#define __ASM_PIPE_H
+
+#ifndef PAGE_SIZE
+#include <asm/page.h>
+#endif
+
+#define PIPE_BUF	PAGE_SIZE
+
+#endif
+
diff --git a/include/asm-arm26/linkage.h b/include/asm-arm26/linkage.h
new file mode 100644
index 000000000000..dbe4b4e31a5b
--- /dev/null
+++ b/include/asm-arm26/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif
diff --git a/include/asm-arm26/local.h b/include/asm-arm26/local.h
new file mode 100644
index 000000000000..6759e9183cef
--- /dev/null
+++ b/include/asm-arm26/local.h
@@ -0,0 +1,2 @@
+//FIXME - nicked from arm32 - check it is correct...
+#include <asm-generic/local.h>
diff --git a/include/asm-arm26/locks.h b/include/asm-arm26/locks.h
new file mode 100644
index 000000000000..81b3bda2ed00
--- /dev/null
+++ b/include/asm-arm26/locks.h
@@ -0,0 +1,161 @@
+/*
+ *  linux/include/asm-arm/proc-armo/locks.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *  Fixes for 26 bit machines, (C) 2000 Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Interrupt safe locking assembler. 
+ */
+#ifndef __ASM_PROC_LOCKS_H
+#define __ASM_PROC_LOCKS_H
+
+/* Decrements by 1, fails if value < 0 */
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__ (			\
+	"@ atomic down operation\n"		\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+"	ldr	lr, [%0]\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+"	subs	lr, lr, #1\n"			\
+"	str	lr, [%0]\n"			\
+"	orrmi	ip, ip, #0x80000000	@ set N\n" \
+"	teqp	ip, #0\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr)				\
+	: "ip", "lr", "cc");			\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int result;		\
+	__asm__ __volatile__ (			\
+"	@ down_op_ret\n"			\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+"	ldr	lr, [%1]\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+"	subs	lr, lr, #1\n"			\
+"	str	lr, [%1]\n"			\
+"	orrmi	ip, ip, #0x80000000	@ set N\n" \
+"	teqp	ip, #0\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (result)			\
+	: "r" (ptr)				\
+	: "ip", "lr", "cc");			\
+	result;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	__asm__ __volatile__ (			\
+	"@ up_op\n"				\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+"	ldr	lr, [%0]\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+"	adds	lr, lr, #1\n"			\
+"	str	lr, [%0]\n"			\
+"	orrle	ip, ip, #0x80000000	@ set N - should this be mi ??? DAG ! \n" \
+"	teqp	ip, #0\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #wake				\
+	:					\
+	: "r" (ptr)				\
+	: "ip", "lr", "cc");			\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+/* Decrements by RW_LOCK_BIAS rather than 1, fails if value != 0 */
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+\
+" orreq ip, ip, #0x40000000 @ set Z \n"\
+"	teqp	ip, #0\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	})
+
+/* Increments by RW_LOCK_BIAS, wakes if value >= 0 */
+#define __up_op_write(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+\
+"	ldr	lr, [%0]\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+\
+" orrcs ip, ip, #0x20000000 @ set C\n" \
+"	teqp	ip, #0\n"			\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mov	ip, pc\n"			\
+"	orr	lr, ip, #0x08000000\n"		\
+"	teqp	lr, #0\n"			\
+\
+"	ldr	lr, [%0]\n"			\
+"	and	ip, ip, #0x0c000003\n"		\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+\
+" orreq ip, ip, #0x40000000 @ Set Z \n" \
+"	teqp	ip, #0\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+#endif
diff --git a/include/asm-arm26/mach-types.h b/include/asm-arm26/mach-types.h
new file mode 100644
index 000000000000..b34045b78128
--- /dev/null
+++ b/include/asm-arm26/mach-types.h
@@ -0,0 +1,37 @@
+/*
+ * Unlike ARM32 this is NOT automatically generated. DONT delete it
+ * Instead, consider FIXME-ing it so its auto-detected.
+ */
+
+#ifndef __ASM_ARM_MACH_TYPE_H
+#define __ASM_ARM_MACH_TYPE_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned int __machine_arch_type;
+#endif
+
+#define MACH_TYPE_ARCHIMEDES           10
+#define MACH_TYPE_A5K                  11
+
+#ifdef CONFIG_ARCH_ARC
+# define machine_arch_type		MACH_TYPE_ARCHIMEDES
+# define machine_is_archimedes()	(machine_arch_type == MACH_TYPE_ARCHIMEDES)
+#else
+# define machine_is_archimedes()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_A5K
+# define machine_arch_type		MACH_TYPE_A5K
+# define machine_is_a5k()		(machine_arch_type == MACH_TYPE_A5K)
+#else
+# define machine_is_a5k()	(0)
+#endif
+
+#ifndef machine_arch_type
+#error Unknown machine type
+#define machine_arch_type       __machine_arch_type
+#endif
+
+#endif
diff --git a/include/asm-arm26/map.h b/include/asm-arm26/map.h
new file mode 100644
index 000000000000..6e12a7fa5c5d
--- /dev/null
+++ b/include/asm-arm26/map.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/map.h
+ *
+ *  Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+struct map_desc {
+	unsigned long virtual;
+	unsigned long physical;
+	unsigned long length;
+	unsigned int type;
+};
+
+struct meminfo;
+
+extern void create_memmap_holes(struct meminfo *);
+extern void memtable_init(struct meminfo *);
+extern void iotable_init(struct map_desc *);
+extern void setup_io_desc(void);
diff --git a/include/asm-arm26/mc146818rtc.h b/include/asm-arm26/mc146818rtc.h
new file mode 100644
index 000000000000..a234130db8f1
--- /dev/null
+++ b/include/asm-arm26/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm26/memory.h b/include/asm-arm26/memory.h
new file mode 100644
index 000000000000..20d78616f650
--- /dev/null
+++ b/include/asm-arm26/memory.h
@@ -0,0 +1,101 @@
+/*
+ *  linux/include/asm-arm26/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+/*
+ * User space: 26MB
+ */
+#define TASK_SIZE       (0x01a00000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
+
+/*
+ * Page offset: 32MB
+ */
+#define PAGE_OFFSET     (0x02000000UL)
+#define PHYS_OFFSET     (0x02000000UL)
+
+#define PHYS_TO_NID(addr)       (0)
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return (unsigned long)x;
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)((unsigned long)x);
+}
+
+#define __pa(x)			(unsigned long)(x)
+#define __va(x)			((void *)(unsigned long)(x))
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *depreciated*.
+ */
+#define virt_to_bus(x)		((unsigned long)(x))
+#define bus_to_virt(x)		((void *)((unsigned long)(x)))
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#define page_to_pfn(page)	(((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_to_page(pfn)	((mem_map + (pfn)) - PHYS_PFN_OFFSET)
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+
+#define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#define virt_addr_valid(kaddr)	((int)(kaddr) >= PAGE_OFFSET && (int)(kaddr) < (unsigned long)high_memory)
+
+/*
+ * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * We should really eliminate virt_to_bus() here - it's depreciated.
+ */
+#define page_to_bus(page)	(page_address(page))
+
+#endif
diff --git a/include/asm-arm26/mman.h b/include/asm-arm26/mman.h
new file mode 100644
index 000000000000..cc27b8240265
--- /dev/null
+++ b/include/asm-arm26/mman.h
@@ -0,0 +1,43 @@
+#ifndef __ARM_MMAN_H__
+#define __ARM_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE    0x8000          /* populate (prefault) page tables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __ARM_MMAN_H__ */
diff --git a/include/asm-arm26/mmu.h b/include/asm-arm26/mmu.h
new file mode 100644
index 000000000000..9b8d3d781a1e
--- /dev/null
+++ b/include/asm-arm26/mmu.h
@@ -0,0 +1,9 @@
+#ifndef __ARM_MMU_H
+#define __ARM_MMU_H
+
+/*
+ * The ARM doesn't have a mmu context
+ */
+typedef struct { } mm_context_t;
+
+#endif
diff --git a/include/asm-arm26/mmu_context.h b/include/asm-arm26/mmu_context.h
new file mode 100644
index 000000000000..1a929bfe5c3a
--- /dev/null
+++ b/include/asm-arm26/mmu_context.h
@@ -0,0 +1,51 @@
+/*
+ *  linux/include/asm-arm/mmu_context.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#define init_new_context(tsk,mm)	0
+#define destroy_context(mm)		do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	cpu_switch_mm(next->pgd, next);
+}
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	cpu_switch_mm(next->pgd, next);
+}
+
+#endif
diff --git a/include/asm-arm26/module.h b/include/asm-arm26/module.h
new file mode 100644
index 000000000000..1157f178daec
--- /dev/null
+++ b/include/asm-arm26/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_ARM_MODULE_H
+#define _ASM_ARM_MODULE_H
+/*
+ * This file contains the arm architecture specific module code.
+ */
+
+#endif /* _ASM_ARM_MODULE_H */
diff --git a/include/asm-arm26/msgbuf.h b/include/asm-arm26/msgbuf.h
new file mode 100644
index 000000000000..33b35b946eaa
--- /dev/null
+++ b/include/asm-arm26/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASMARM_MSGBUF_H
+#define _ASMARM_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASMARM_MSGBUF_H */
diff --git a/include/asm-arm26/namei.h b/include/asm-arm26/namei.h
new file mode 100644
index 000000000000..a402d3b9d0f7
--- /dev/null
+++ b/include/asm-arm26/namei.h
@@ -0,0 +1,25 @@
+/* 
+ * linux/include/asm-arm/namei.h
+ *
+ * Routines to handle famous /usr/gnemul
+ * Derived from the Sparc version of this file
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ASMARM_NAMEI_H
+#define __ASMARM_NAMEI_H
+
+#define ARM_BSD_EMUL "usr/gnemul/bsd/"
+
+static inline char *__emul_prefix(void)
+{
+	switch (current->personality) {
+	case PER_BSD:
+		return ARM_BSD_EMUL;
+	default:
+		return NULL;
+	}
+}
+
+#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm26/oldlatches.h b/include/asm-arm26/oldlatches.h
new file mode 100644
index 000000000000..bc87089b2152
--- /dev/null
+++ b/include/asm-arm26/oldlatches.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-arm/arch-arc/oldlatches.h
+ *
+ *  Copyright (C) 1996 Russell King, Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   04-04-1998	PJB/RMK	Merged arc and a5k versions
+ */
+#ifndef _ASM_ARCH_OLDLATCH_H
+#define _ASM_ARCH_OLDLATCH_H
+
+#define LATCHA_FDSEL0    (1<<0)
+#define LATCHA_FDSEL1    (1<<1)
+#define LATCHA_FDSEL2    (1<<2)
+#define LATCHA_FDSEL3    (1<<3)
+#define LATCHA_FDSELALL  (0xf)
+#define LATCHA_SIDESEL   (1<<4)
+#define LATCHA_MOTOR     (1<<5)
+#define LATCHA_INUSE     (1<<6)
+#define LATCHA_CHANGERST (1<<7)
+
+#define LATCHB_FDCDENSITY  (1<<1)
+#define LATCHB_FDCRESET    (1<<3)
+#define LATCHB_PRINTSTROBE (1<<4)
+
+/* newval=(oldval & mask)|newdata */
+void oldlatch_bupdate(unsigned char mask,unsigned char newdata);
+
+/* newval=(oldval & mask)|newdata */
+void oldlatch_aupdate(unsigned char mask,unsigned char newdata);
+
+#endif
+
diff --git a/include/asm-arm26/page.h b/include/asm-arm26/page.h
new file mode 100644
index 000000000000..c334079b082b
--- /dev/null
+++ b/include/asm-arm26/page.h
@@ -0,0 +1,115 @@
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern void __clear_user_page(void *p, unsigned long user);
+extern void __copy_user_page(void *to, const void *from, unsigned long user);
+extern void copy_page(void *to, const void *from);
+
+//FIXME these may be wrong on ARM26
+#define clear_user_page(addr,vaddr,pg)			\
+	do {						\
+		preempt_disable();			\
+		__clear_user_page(addr, vaddr);	\
+		preempt_enable();			\
+	} while (0)
+
+#define copy_user_page(to,from,vaddr,pg)		\
+	do {						\
+		preempt_disable();			\
+		__copy_user_page(to, from, vaddr);	\
+		preempt_enable();			\
+	} while (0)
+
+#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+#define copy_page(to, from)  __copy_user_page(to, from, 0);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pgd_val(x)      ((x).pgd)
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pgd_t;
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgprot_t;
+
+//FIXME - should these cast to unsigned long?
+#define pgd_val(x)      (x)
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+/* PAGE_SHIFT determines the page size.  This is configurable. */
+#if defined(CONFIG_PAGESIZE_16)
+#define PAGE_SHIFT      14              /* 16K */
+#else           /* default */
+#define PAGE_SHIFT      15              /* 32K */
+#endif
+
+#define EXEC_PAGESIZE   32768
+
+#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/param.h b/include/asm-arm26/param.h
new file mode 100644
index 000000000000..6b1e52df542e
--- /dev/null
+++ b/include/asm-arm26/param.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/param.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifndef __KERNEL_HZ
+#define __KERNEL_HZ	100
+#endif
+
+#ifdef __KERNEL__
+# define HZ		__KERNEL_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#else
+# define HZ		100
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN  64
+
+#endif
+
diff --git a/include/asm-arm26/parport.h b/include/asm-arm26/parport.h
new file mode 100644
index 000000000000..f2f90c76ddd1
--- /dev/null
+++ b/include/asm-arm26/parport.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
+ *
+ *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm26/pci.h b/include/asm-arm26/pci.h
new file mode 100644
index 000000000000..6ac67ed7718c
--- /dev/null
+++ b/include/asm-arm26/pci.h
@@ -0,0 +1,6 @@
+/* Should not be needed. IDE stupidity */
+/* JMA 18.05.03 - is kinda needed, if only to tell it we don't have a PCI bus */
+
+#define PCI_DMA_BUS_IS_PHYS  		0
+#define pcibios_scan_all_fns(a, b)	0
+
diff --git a/include/asm-arm26/percpu.h b/include/asm-arm26/percpu.h
new file mode 100644
index 000000000000..b4e32d8ec072
--- /dev/null
+++ b/include/asm-arm26/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_PERCPU
+#define __ARM_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif
diff --git a/include/asm-arm26/pgalloc.h b/include/asm-arm26/pgalloc.h
new file mode 100644
index 000000000000..6437167b1ffe
--- /dev/null
+++ b/include/asm-arm26/pgalloc.h
@@ -0,0 +1,70 @@
+/*
+ *  linux/include/asm-arm/pgalloc.h
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <linux/slab.h>
+
+extern kmem_cache_t *pte_cache;
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr){
+	return kmem_cache_alloc(pte_cache, GFP_KERNEL);
+}
+
+static inline void pte_free_kernel(pte_t *pte){
+        if (pte)
+                kmem_cache_free(pte_cache, pte);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ *
+ * If 'mm' is the init tasks mm, then we are doing a vmalloc, and we
+ * need to set stuff up correctly for it.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+//FIXME - is this doing the right thing?
+        set_pmd(pmdp, (unsigned long)ptep | 1/*FIXME _PMD_PRESENT*/);
+}
+
+/*
+ * FIXME - We use the old 2.5.5-rmk1 hack for this.
+ * This is not truly correct, but should be functional.
+ */
+#define pte_alloc_one(mm,addr)  ((struct page *)pte_alloc_one_kernel(mm,addr))
+#define pte_free(pte)           pte_free_kernel((pte_t *)pte)
+#define pmd_populate(mm,pmdp,ptep) pmd_populate_kernel(mm,pmdp,(pte_t *)ptep)
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ * 
+ * trick __pmd_alloc into optimising away. The actual value is irrelevant though as it
+ * is thrown away. It just cant be zero. -IM
+ */
+
+#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(pmd)			do { } while (0)
+#define pgd_populate(mm,pmd,pte)	BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(pgd)			free_pgd_slow(pgd)
+
+#define check_pgt_cache()		do { } while (0)
+
+#endif
diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
new file mode 100644
index 000000000000..af0b8907dc14
--- /dev/null
+++ b/include/asm-arm26/pgtable.h
@@ -0,0 +1,305 @@
+/*
+ *  linux/include/asm-arm26/pgtable.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *  Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/memory.h>
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on most ARM hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_READONLY
+#define __P101  PAGE_READONLY
+#define __P110  PAGE_COPY
+#define __P111  PAGE_COPY
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_READONLY
+#define __S101  PAGE_READONLY
+#define __S110  PAGE_SHARED
+#define __S111  PAGE_SHARED
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGD_SHIFT		25
+#define PMD_SHIFT		20
+
+#define PGD_SIZE                (1UL << PGD_SHIFT)
+#define PGD_MASK                (~(PGD_SIZE-1))
+#define PMD_SIZE                (1UL << PMD_SHIFT)
+#define PMD_MASK                (~(PMD_SIZE-1))
+
+/* The kernel likes to use these names for the above (ick) */
+#define PGDIR_SIZE PGD_SIZE
+#define PGDIR_MASK PGD_MASK
+
+#define PTRS_PER_PGD            32
+#define PTRS_PER_PMD            1
+#define PTRS_PER_PTE            32
+
+#define FIRST_USER_PGD_NR       1
+#define USER_PTRS_PER_PGD       ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR)
+
+// FIXME - WTF?
+#define LIBRARY_TEXT_START	0x0c000000
+
+
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pte_page(pte)           (pfn_to_page(pte_pfn(pte)))
+#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+#define page_pte_prot(page,prot)	mk_pte(page, prot)
+#define page_pte(page)		mk_pte(page, __pgprot(0))
+
+/*
+ * Terminology: PGD = Page Directory, PMD = Page Middle Directory,
+ *              PTE = Page Table Entry
+ *
+ * on arm26 we have no 2nd level page table. we simulate this by removing the
+ * PMD.
+ *
+ * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it
+ * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op).
+ *
+ * however, to work this way, whilst we are allocating 32 pgds, containing 32
+ * PTEs, the actual work is done on the PMDs, thus:
+ *
+ * instead of  mm->pgd->pmd->pte
+ * we have     mm->pgdpmd->pte
+ *
+ * IOW, think of PGD operations and PMD ones as being the same thing, just
+ * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff
+ * deals with the pte side of things.
+ *
+ * additionally, we store some bits in the PGD and PTE pointers: 
+ * PGDs:
+ *   o The lowest (1) bit of the PGD is to determine if it is present or swap.
+ *   o The 2nd bit of the PGD is unused and must be zero.
+ *   o The top 6 bits of the PGD must be zero. 
+ * PTEs:
+ *   o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The
+ *     others determine the pages attributes.
+ *
+ * the pgd_val, pmd_val, and pte_val macros seem to be private to our code.
+ * They get the RAW value of the PGD/PMD/PTE entry, including our flags
+ * encoded into the pointers.
+ * 
+ * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel,
+ * so they shouldnt have our flags attached.
+ *
+ * If you understood that, feel free to explain it to me...
+ *
+ */
+
+#define _PMD_PRESENT     (0x01)
+
+/* These definitions allow us to optimise out stuff like pmd_alloc() */
+#define pgd_none(pgd)		(0) 
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+
+/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd)
+ */
+#define pmd_none(pmd)           (!pmd_val(pmd))
+#define pmd_bad(pmd)            ((pmd_val(pmd) & 0xfc000002))
+#define pmd_present(pmd)        (pmd_val(pmd) & _PMD_PRESENT)
+#define set_pmd(pmd_ptr, pmd)   ((*(pmd_ptr)) = (pmd))
+#define pmd_clear(pmdp)         set_pmd(pmdp, __pmd(0))
+
+/* and these handle our pte tables */
+#define pte_none(pte)           (!pte_val(pte))
+#define pte_present(pte)        (pte_val(pte) & _PAGE_PRESENT)
+#define set_pte(pte_ptr, pte)   ((*(pte_ptr)) = (pte))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define pte_clear(mm,addr,ptep)	set_pte_at((mm),(addr),(ptep), __pte(0))
+
+/* macros to ease the getting of pointers to stuff... */
+#define pgd_offset(mm, addr)	((pgd_t *)(mm)->pgd        + __pgd_index(addr))
+#define pmd_offset(pgd, addr)	((pmd_t *)(pgd))
+#define pte_offset(pmd, addr)   ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr))
+
+/* there is no __pmd_index as we dont use pmds */
+#define __pgd_index(addr)	((addr) >> PGD_SHIFT)
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+
+/* Keep the kernel happy */
+#define pgd_index(addr)         __pgd_index(addr)
+#define pgd_offset_k(addr)	(pgd_offset(&init_mm, addr))
+
+/*
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;) FIXME: surely 1 page not 4k ?
+ */
+#define VMALLOC_START     0x01a00000
+#define VMALLOC_END       0x01c00000
+
+/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to
+ * return a pointer to memory (no special alignment)
+ */
+#define pmd_page(pmd)  ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT))
+#define pmd_page_kernel(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT))
+
+#define pte_offset_kernel(dir,addr)     (pmd_page_kernel(*(dir)) + __pte_index(addr))
+
+#define pte_offset_map(dir,addr)        (pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte)                  do { } while (0)
+#define pte_unmap_nested(pte)           do { } while (0)
+
+
+#define _PAGE_PRESENT   0x01
+#define _PAGE_READONLY  0x02
+#define _PAGE_NOT_USER  0x04
+#define _PAGE_OLD       0x08
+#define _PAGE_CLEAN     0x10
+
+// an old page has never been read.
+// a clean page has never been written.
+
+/*                               -- present --   -- !dirty --  --- !write ---   ---- !user --- */
+#define PAGE_NONE       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER)
+#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_CLEAN                                  )
+#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
+#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
+#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT                                | _PAGE_NOT_USER)
+
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_read(pte)                   (!(pte_val(pte) & _PAGE_NOT_USER))
+#define pte_write(pte)                  (!(pte_val(pte) & _PAGE_READONLY))
+#define pte_exec(pte)                   (!(pte_val(pte) & _PAGE_NOT_USER))
+#define pte_dirty(pte)                  (!(pte_val(pte) & _PAGE_CLEAN))
+#define pte_young(pte)                  (!(pte_val(pte) & _PAGE_OLD))
+//ONLY when !pte_present() I think. nicked from arm32 (FIXME!)
+#define pte_file(pte)                   (!(pte_val(pte) & _PAGE_OLD))
+
+#define PTE_BIT_FUNC(fn,op)                     \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, |=  _PAGE_READONLY);
+PTE_BIT_FUNC(mkwrite,   &= ~_PAGE_READONLY);
+PTE_BIT_FUNC(exprotect, |=  _PAGE_NOT_USER);
+PTE_BIT_FUNC(mkexec,    &= ~_PAGE_NOT_USER);
+PTE_BIT_FUNC(mkclean,   |=  _PAGE_CLEAN);
+PTE_BIT_FUNC(mkdirty,   &= ~_PAGE_CLEAN);
+PTE_BIT_FUNC(mkold,     |=  _PAGE_OLD);
+PTE_BIT_FUNC(mkyoung,   &= ~_PAGE_OLD);
+
+/*
+ * We don't store cache state bits in the page table here. FIXME - or do we?
+ */
+#define pgprot_noncached(prot)  (prot)
+#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op?
+
+extern void pgtable_cache_init(void);
+
+//FIXME - nicked from arm32 and brutally hacked. probably wrong.
+#define pte_to_pgoff(x) (pte_val(x) >> 2)
+#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD)
+
+//FIXME - next line borrowed from arm32. is it right?
+#define PTE_FILE_MAX_BITS       30
+
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __swp_offset(x)		((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{
+        pte_t pte;
+        pte_val(pte) = physpage | pgprot_val(pgprot);
+        return pte;
+}
+
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * remap a physical address `phys' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_page_range(vma,from,phys,size,prot) \
+		remap_pfn_range(vma, from, (phys) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm26/poll.h b/include/asm-arm26/poll.h
new file mode 100644
index 000000000000..fdfdab064a65
--- /dev/null
+++ b/include/asm-arm26/poll.h
@@ -0,0 +1,25 @@
+#ifndef __ASMARM_POLL_H
+#define __ASMARM_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-arm26/posix_types.h b/include/asm-arm26/posix_types.h
new file mode 100644
index 000000000000..b88344ad390c
--- /dev/null
+++ b/include/asm-arm26/posix_types.h
@@ -0,0 +1,80 @@
+/*
+ *  linux/include/asm-arm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset ((fdsetp), 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/include/asm-arm26/proc-fns.h b/include/asm-arm26/proc-fns.h
new file mode 100644
index 000000000000..a83100454055
--- /dev/null
+++ b/include/asm-arm26/proc-fns.h
@@ -0,0 +1,49 @@
+/*
+ *  linux/include/asm-arm26/proc-fns.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+/*
+ * Don't change this structure - ASM code
+ * relies on it.
+ */
+extern struct processor {
+	/* check for any bugs */
+	void (*_check_bugs)(void);
+	/* Set up any processor specifics */
+	void (*_proc_init)(void);
+	/* Disable any processor specifics */
+	void (*_proc_fin)(void);
+	/* set the MEMC hardware mappings */
+	void (*_set_pgd)(pgd_t *pgd);
+	/* XCHG */
+	unsigned long (*_xchg_1)(unsigned long x, volatile void *ptr);
+	unsigned long (*_xchg_4)(unsigned long x, volatile void *ptr);
+} processor;
+
+extern const struct processor arm2_processor_functions;
+extern const struct processor arm250_processor_functions;
+extern const struct processor arm3_processor_functions;
+
+#define cpu_check_bugs()			processor._check_bugs()
+#define cpu_proc_init()				processor._proc_init()
+#define cpu_proc_fin()				processor._proc_fin()
+#define cpu_do_idle()				do { } while (0)
+#define cpu_switch_mm(pgd,mm)			processor._set_pgd(pgd)
+#define cpu_xchg_1(x,ptr)			processor._xchg_1(x,ptr)
+#define cpu_xchg_4(x,ptr)			processor._xchg_4(x,ptr)
+
+
+//FIXME - these shouldnt be in proc-fn.h
+extern void cpu_memc_update_all(pgd_t *pgd);
+extern void cpu_memc_update_entry(pgd_t *pgd, unsigned long phys_pte, unsigned long log_addr);
+
+#endif
diff --git a/include/asm-arm26/processor.h b/include/asm-arm26/processor.h
new file mode 100644
index 000000000000..1d2d5f7b467b
--- /dev/null
+++ b/include/asm-arm26/processor.h
@@ -0,0 +1,113 @@
+/*
+ *  linux/include/asm-arm26/processor.h
+ *
+ *  Copyright (C) 1995 Russell King
+ *  Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#include <linux/string.h>
+
+#define KERNEL_STACK_SIZE 4096
+
+typedef struct {
+        void (*put_byte)(void);               /* Special calling convention */
+        void (*get_byte)(void);               /* Special calling convention */
+        void (*put_half)(void);               /* Special calling convention */
+        void (*get_half)(void);               /* Special calling convention */
+        void (*put_word)(void);               /* Special calling convention */
+        void (*get_word)(void);               /* Special calling convention */
+        void (*put_dword)(void);              /* Special calling convention */
+        unsigned long (*copy_from_user)(void *to, const void *from, unsigned long sz);
+        unsigned long (*copy_to_user)(void *to, const void *from, unsigned long sz);
+        unsigned long (*clear_user)(void *addr, unsigned long sz);
+        unsigned long (*strncpy_from_user)(char *to, const char *from, unsigned long sz);
+        unsigned long (*strnlen_user)(const char *s, long n);
+} uaccess_t;
+
+extern uaccess_t uaccess_user, uaccess_kernel;
+
+#define EXTRA_THREAD_STRUCT                     \
+        uaccess_t       *uaccess;         /* User access functions*/
+
+#define EXTRA_THREAD_STRUCT_INIT                \
+        .uaccess        = &uaccess_kernel,
+
+// FIXME?!!
+
+#define start_thread(regs,pc,sp)                                        \
+({                                                                      \
+        unsigned long *stack = (unsigned long *)sp;                     \
+        set_fs(USER_DS);                                                \
+        memzero(regs->uregs, sizeof (regs->uregs));                     \
+        regs->ARM_pc = pc | ~0xfc000003;        /* pc */                \
+        regs->ARM_sp = sp;              /* sp */                        \
+        regs->ARM_r2 = stack[2];        /* r2 (envp) */                 \
+        regs->ARM_r1 = stack[1];        /* r1 (argv) */                 \
+        regs->ARM_r0 = stack[0];        /* r0 (argc) */                 \
+})
+
+#define KSTK_EIP(tsk)   (((unsigned long *)(4096+(unsigned long)(tsk)))[1020])
+#define KSTK_ESP(tsk)   (((unsigned long *)(4096+(unsigned long)(tsk)))[1018])
+
+struct debug_entry {
+        u32                     address;
+        u32		        insn;
+};
+
+struct debug_info {
+        int                     nsaved;
+        struct debug_entry      bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long			address;
+	unsigned long			trap_no;
+	unsigned long			error_code;
+							/* debugging	  */
+	struct debug_info		debug;
+	EXTRA_THREAD_STRUCT
+};
+
+#define INIT_THREAD  { \
+EXTRA_THREAD_STRUCT_INIT \
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm26/procinfo.h b/include/asm-arm26/procinfo.h
new file mode 100644
index 000000000000..b28624db69ff
--- /dev/null
+++ b/include/asm-arm26/procinfo.h
@@ -0,0 +1,56 @@
+/*
+ *  linux/include/asm-arm/procinfo.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#ifndef __ASSEMBLY__
+
+//struct processor;
+//struct cpu_user_fns;
+
+struct proc_info_item {
+	const char	 *manufacturer;
+	const char	 *cpu_name;
+};
+
+/*
+ * Note!  struct processor is always defined if we're
+ * using MULTI_CPU, otherwise this entry is unused,
+ * but still exists.
+ *
+ * NOTE! The following structure is defined by assembly
+ * language, NOT C code.  For more information, check:
+ *  arch/arm/mm/proc-*.S and arch/arm/kernel/head-armv.S
+ */
+struct proc_info_list {
+	unsigned int		cpu_val;
+	unsigned int		cpu_mask;
+	const char		*arch_name;
+	const char		*elf_name;
+	unsigned int		elf_hwcap;
+	struct proc_info_item	*info;
+	struct processor	*proc;
+};
+
+#endif	/* __ASSEMBLY__ */
+
+#define PROC_INFO_SZ	48
+
+#define HWCAP_SWP	1
+#define HWCAP_HALF	2
+#define HWCAP_THUMB	4
+#define HWCAP_26BIT	8	/* Play it safe */
+#define HWCAP_FAST_MULT	16
+#define HWCAP_FPA	32
+#define HWCAP_VFP	64
+#define HWCAP_EDSP	128
+#define HWCAP_JAVA	256
+
+#endif
diff --git a/include/asm-arm26/ptrace.h b/include/asm-arm26/ptrace.h
new file mode 100644
index 000000000000..6a46b5ae1156
--- /dev/null
+++ b/include/asm-arm26/ptrace.h
@@ -0,0 +1,104 @@
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+#define PTRACE_OLDSETOPTIONS    21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD	0x00000001
+
+#define MODE_USR26      0x00000000
+#define MODE_FIQ26      0x00000001
+#define MODE_IRQ26      0x00000002
+#define MODE_SVC26      0x00000003
+#define MODE_MASK       0x00000003
+
+#define PSR_F_BIT       0x04000000
+#define PSR_I_BIT       0x08000000
+#define PSR_V_BIT       0x10000000
+#define PSR_C_BIT       0x20000000
+#define PSR_Z_BIT       0x40000000
+#define PSR_N_BIT       0x80000000
+
+#define PCMASK          0xfc000003
+
+
+#ifndef __ASSEMBLY__
+
+#define pc_pointer(v) ((v) & ~PCMASK)   /* convert v to pc type address */
+#define instruction_pointer(regs) (pc_pointer((regs)->ARM_pc)) /* get pc */
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long uregs[17];
+};
+
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[16]
+
+#ifdef __KERNEL__
+
+#define processor_mode(regs) \
+	((regs)->ARM_pc & MODE_MASK)
+
+#define user_mode(regs) \
+	(processor_mode(regs) == MODE_USR26)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_pc & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_pc & PSR_F_BIT))
+
+#define condition_codes(regs) \
+	((regs)->ARM_pc & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if (user_mode(regs) &&
+	    (regs->ARM_pc & (PSR_F_BIT | PSR_I_BIT)) == 0)
+		return 1;
+
+	/*
+	 * force it to be something sensible
+	 */
+	regs->ARM_pc &= ~(MODE_MASK | PSR_F_BIT | PSR_I_BIT);
+
+	return 0;
+}
+
+extern void show_regs(struct pt_regs *);
+
+#define predicate(x)    (x & 0xf0000000)
+#define PREDICATE_ALWAYS        0xe0000000
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
+
diff --git a/include/asm-arm26/resource.h b/include/asm-arm26/resource.h
new file mode 100644
index 000000000000..734b581b5b6a
--- /dev/null
+++ b/include/asm-arm26/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_RESOURCE_H
+#define _ARM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-arm26/scatterlist.h b/include/asm-arm26/scatterlist.h
new file mode 100644
index 000000000000..d9c056c7784e
--- /dev/null
+++ b/include/asm-arm26/scatterlist.h
@@ -0,0 +1,26 @@
+#ifndef _ASMARM_SCATTERLIST_H
+#define _ASMARM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+	struct page	*page;		/* buffer page			 */
+	unsigned int	offset;		/* buffer offset		 */
+	dma_addr_t	dma_address;	/* dma address			 */
+	unsigned int	length;		/* length			 */
+	char		*__address;	/* for set_dma_addr		 */
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/include/asm-arm26/sections.h b/include/asm-arm26/sections.h
new file mode 100644
index 000000000000..10b6370efad0
--- /dev/null
+++ b/include/asm-arm26/sections.h
@@ -0,0 +1,2 @@
+//FIXME - nicked from arm32 - check its correct.
+#include <asm-generic/sections.h>
diff --git a/include/asm-arm26/segment.h b/include/asm-arm26/segment.h
new file mode 100644
index 000000000000..9e24c21f6304
--- /dev/null
+++ b/include/asm-arm26/segment.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARM_SEGMENT_H
+#define __ASM_ARM_SEGMENT_H
+
+#define __KERNEL_CS   0x0
+#define __KERNEL_DS   0x0
+
+#define __USER_CS     0x1
+#define __USER_DS     0x1
+
+#endif /* __ASM_ARM_SEGMENT_H */
+
diff --git a/include/asm-arm26/semaphore-helper.h b/include/asm-arm26/semaphore-helper.h
new file mode 100644
index 000000000000..1d7f1987edb9
--- /dev/null
+++ b/include/asm-arm26/semaphore-helper.h
@@ -0,0 +1,84 @@
+#ifndef ASMARM_SEMAPHORE_HELPER_H
+#define ASMARM_SEMAPHORE_HELPER_H
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (atomic_read(&sem->count) <= 0)
+		sem->waking++;
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking non zero interruptible
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;	
+}
+
+/*
+ * waking_non_zero_try_lock:
+ *	1	failed to lock
+ *	0	got the lock
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 1;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->waking--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif
diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h
new file mode 100644
index 000000000000..c1b6a1edad92
--- /dev/null
+++ b/include/asm-arm26/semaphore.h
@@ -0,0 +1,103 @@
+/*
+ * linux/include/asm-arm/semaphore.h
+ */
+#ifndef __ASM_ARM_SEMAPHORE_H
+#define __ASM_ARM_SEMAPHORE_H
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+#include <asm/locks.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INIT(name, n)					\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait),	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INIT(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)	\
+	struct semaphore name = __SEMAPHORE_INIT(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+/*
+ * special register calling convention
+ */
+asmlinkage void __down_failed(void);
+asmlinkage int  __down_interruptible_failed(void);
+asmlinkage int  __down_trylock_failed(void);
+asmlinkage void __up_wakeup(void);
+
+extern void __down(struct semaphore * sem);
+extern int  __down_interruptible(struct semaphore * sem);
+extern int  __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down" is the actual routine that waits...
+ */
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	__down_op(sem, __down_failed);
+}
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down_interruptible" is the actual routine that waits...
+ */
+static inline int down_interruptible (struct semaphore * sem)
+{
+	might_sleep();
+	return __down_op_ret(sem, __down_interruptible_failed);
+}
+
+static inline int down_trylock(struct semaphore *sem)
+{
+	return __down_op_ret(sem, __down_trylock_failed);
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	__up_op(sem, __up_wakeup);
+}
+
+#endif
diff --git a/include/asm-arm26/sembuf.h b/include/asm-arm26/sembuf.h
new file mode 100644
index 000000000000..1c0283954289
--- /dev/null
+++ b/include/asm-arm26/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SEMBUF_H
+#define _ASMARM_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SEMBUF_H */
diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
new file mode 100644
index 000000000000..21e1df31f086
--- /dev/null
+++ b/include/asm-arm26/serial.h
@@ -0,0 +1,63 @@
+/*
+ *  linux/include/asm-arm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#if defined(CONFIG_ARCH_A5K)
+     /* UART CLK        PORT  IRQ     FLAGS        */
+
+#define STD_SERIAL_PORT_DEFNS                                           \
+        { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS },     /* ttyS0 */     \
+        { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS },     /* ttyS1 */
+
+#else
+
+#define STD_SERIAL_PORT_DEFNS                                           \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS0 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS1 */
+
+#endif
+
+#define EXTRA_SERIAL_PORT_DEFNS \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS2 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS3 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS4 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS5 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS6 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS7 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS8 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS9 */     \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS10 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS11 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS12 */    \
+        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS13 */
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h
new file mode 100644
index 000000000000..6348931be65d
--- /dev/null
+++ b/include/asm-arm26/setup.h
@@ -0,0 +1,205 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;		/* bit 0 = read-only */
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	u32	size;
+	u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	u8		x;
+	u8		y;
+	u16		video_page;
+	u8		video_mode;
+	u8		video_cols;
+	u16		video_ega_bx;
+	u8		video_lines;
+	u8		video_isvga;
+	u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * its depreciated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	u32 start;	/* physical start address */
+	u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	u32 low;
+	u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	u16		lfb_width;
+	u16		lfb_height;
+	u16		lfb_depth;
+	u16		lfb_linelength;
+	u32		lfb_base;
+	u32		lfb_size;
+	u8		red_size;
+	u8		red_pos;
+	u8		green_size;
+	u8		green_pos;
+	u8		blue_size;
+	u8		blue_pos;
+	u8		rsvd_size;
+	u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	u32 memc_control_reg;
+	u32 vram_pages;
+	u8 sounddefault;
+	u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+/*
+ * Memory map description
+ */
+#define NR_BANKS 8
+
+struct meminfo {
+	int nr_banks;
+	unsigned long end;
+	struct {
+		unsigned long start;
+		unsigned long size;
+		int           node;
+	} bank[NR_BANKS];
+};
+
+extern struct meminfo meminfo;
+
+#endif
diff --git a/include/asm-arm26/shmbuf.h b/include/asm-arm26/shmbuf.h
new file mode 100644
index 000000000000..2e5c67ba1c97
--- /dev/null
+++ b/include/asm-arm26/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_SHMBUF_H
+#define _ASMARM_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SHMBUF_H */
diff --git a/include/asm-arm26/shmparam.h b/include/asm-arm26/shmparam.h
new file mode 100644
index 000000000000..d3748686631e
--- /dev/null
+++ b/include/asm-arm26/shmparam.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_SHMPARAM_H
+#define _ASMARM_SHMPARAM_H
+
+#ifndef SHMMAX
+#define SHMMAX          0x003fa000
+#endif
+
+/*
+ * This should be the size of the virtually indexed cache/ways,
+ * or page size, whichever is greater since the cache aliases
+ * every size/ways bytes.
+ */
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASMARM_SHMPARAM_H */
diff --git a/include/asm-arm26/sigcontext.h b/include/asm-arm26/sigcontext.h
new file mode 100644
index 000000000000..013ad2074fc7
--- /dev/null
+++ b/include/asm-arm26/sigcontext.h
@@ -0,0 +1,33 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long arm_r0;
+	unsigned long arm_r1;
+	unsigned long arm_r2;
+	unsigned long arm_r3;
+	unsigned long arm_r4;
+	unsigned long arm_r5;
+	unsigned long arm_r6;
+	unsigned long arm_r7;
+	unsigned long arm_r8;
+	unsigned long arm_r9;
+	unsigned long arm_r10;
+	unsigned long arm_fp;
+	unsigned long arm_ip;
+	unsigned long arm_sp;
+	unsigned long arm_lr;
+	unsigned long arm_pc;
+	unsigned long fault_address;
+};
+
+
+#endif
diff --git a/include/asm-arm26/siginfo.h b/include/asm-arm26/siginfo.h
new file mode 100644
index 000000000000..5e21852e6039
--- /dev/null
+++ b/include/asm-arm26/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_SIGINFO_H
+#define _ASMARM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h
new file mode 100644
index 000000000000..6f62e51a2e5a
--- /dev/null
+++ b/include/asm-arm26/signal.h
@@ -0,0 +1,201 @@
+#ifndef _ASMARM_SIGNAL_H
+#define _ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_INTERRUPT		is a no-op, but left due to historical reasons. Use the
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		0x80000000
+#define SA_SAMPLE_RANDOM	0x10000000
+#define SA_IRQNOMASK		0x08000000
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define sigmask(sig)	(1UL << ((sig) - 1))
+//FIXME!!!
+//#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
+
+#endif
+
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif
+
+
+#endif
diff --git a/include/asm-arm26/sizes.h b/include/asm-arm26/sizes.h
new file mode 100644
index 000000000000..f8d92ca12040
--- /dev/null
+++ b/include/asm-arm26/sizes.h
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size defintions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/include/asm-arm26/smp.h b/include/asm-arm26/smp.h
new file mode 100644
index 000000000000..5ca771631fd8
--- /dev/null
+++ b/include/asm-arm26/smp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
diff --git a/include/asm-arm26/socket.h b/include/asm-arm26/socket.h
new file mode 100644
index 000000000000..46d20585d951
--- /dev/null
+++ b/include/asm-arm26/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASMARM_SOCKET_H
+#define _ASMARM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-arm26/sockios.h b/include/asm-arm26/sockios.h
new file mode 100644
index 000000000000..77c34087d513
--- /dev/null
+++ b/include/asm-arm26/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_ARM_SOCKIOS_H
+#define __ARCH_ARM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-arm26/spinlock.h b/include/asm-arm26/spinlock.h
new file mode 100644
index 000000000000..e92e81deb4fd
--- /dev/null
+++ b/include/asm-arm26/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#error ARM architecture does not support SMP spin locks
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm26/stat.h b/include/asm-arm26/stat.h
new file mode 100644
index 000000000000..e4abc4fa0850
--- /dev/null
+++ b/include/asm-arm26/stat.h
@@ -0,0 +1,77 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long  st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long  st_rdev;
+	unsigned char   __pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long   st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long   __pad4;		/* Future possible st_blocks hi bits */
+
+	unsigned long	st_atime;
+	unsigned long   st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long   st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/include/asm-arm26/statfs.h b/include/asm-arm26/statfs.h
new file mode 100644
index 000000000000..776dbc8f7623
--- /dev/null
+++ b/include/asm-arm26/statfs.h
@@ -0,0 +1,8 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+//FIXME - this may not be appropriate for arm26. check it out.
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-arm26/string.h b/include/asm-arm26/string.h
new file mode 100644
index 000000000000..2a8ab162412f
--- /dev/null
+++ b/include/asm-arm26/string.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMZERO
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n)							\
+	({								\
+		if ((n) != 0) {						\
+			if (__builtin_constant_p((v)) && (v) == 0)	\
+				__memzero((p),(n));			\
+			else						\
+				memset((p),(v),(n));			\
+		}							\
+		(p);							\
+	})
+
+#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
+
+#endif
diff --git a/include/asm-arm26/suspend.h b/include/asm-arm26/suspend.h
new file mode 100644
index 000000000000..5e4c1cc0c19d
--- /dev/null
+++ b/include/asm-arm26/suspend.h
@@ -0,0 +1,4 @@
+#ifdef _ASMARM_SUSPEND_H
+#define _ASMARM_SUSPEND_H
+
+#endif
diff --git a/include/asm-arm26/sysirq.h b/include/asm-arm26/sysirq.h
new file mode 100644
index 000000000000..cad250c7b9ec
--- /dev/null
+++ b/include/asm-arm26/sysirq.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/asm-arm/arch-arc/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King, Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   04-04-1998 PJB     Merged arc and a5k versions
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_ARCH_A5K)
+#define IRQ_PRINTER             0
+#define IRQ_BATLOW              1
+#define IRQ_FLOPPYINDEX         2
+#define IRQ_FLOPPYDISK          12
+#elif defined(CONFIG_ARCH_ARC)
+#define IRQ_PRINTERBUSY         0
+#define IRQ_SERIALRING          1
+#define IRQ_PRINTERACK          2
+#define IRQ_FLOPPYCHANGED       12
+#endif
+
+#define IRQ_VSYNCPULSE          3
+#define IRQ_POWERON             4
+#define IRQ_TIMER0              5
+#define IRQ_TIMER1              6
+#define IRQ_IMMEDIATE           7
+#define IRQ_EXPCARDFIQ          8
+#define IRQ_SOUNDCHANGE         9
+#define IRQ_SERIALPORT          10
+#define IRQ_HARDDISK            11
+#define IRQ_EXPANSIONCARD       13
+#define IRQ_KEYBOARDTX          14
+#define IRQ_KEYBOARDRX          15
+
+#if defined(CONFIG_ARCH_A5K)
+#define FIQ_SERIALPORT          4
+#elif defined(CONFIG_ARCH_ARC)
+#define FIQ_FLOPPYIRQ           1
+#define FIQ_FD1772              FIQ_FLOPPYIRQ
+#endif
+
+#define FIQ_FLOPPYDATA          0
+#define FIQ_ECONET              2
+#define FIQ_EXPANSIONCARD       6
+#define FIQ_FORCE               7
+
+#define IRQ_TIMER               IRQ_TIMER0
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START               64
+
+#define irq_cannonicalize(i)    (i)
+
diff --git a/include/asm-arm26/system.h b/include/asm-arm26/system.h
new file mode 100644
index 000000000000..f23fac1938f3
--- /dev/null
+++ b/include/asm-arm26/system.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+
+struct thread_info;
+struct task_struct;
+
+#if 0
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+FIXME - sort this
+/*
+ * We need to turn the caches off before calling the reset vector - RiscOS
+ * messes up if we don't
+ */
+#define proc_hard_reset()       cpu_proc_fin()
+
+#endif
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+		__attribute__((noreturn));
+
+void die_if_kernel(const char *str, struct pt_regs *regs, int err);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, const char *name);
+
+#include <asm/proc-fns.h>
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+extern asmlinkage void __backtrace(void);
+
+#define set_cr(x)					\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c1, c0, 0	@ set CR"	\
+	: : "r" (x) : "cc")
+
+#define get_cr()					\
+	({						\
+	unsigned int __val;				\
+	__asm__ __volatile__(				\
+	"mrc	p15, 0, %0, c1, c0, 0	@ get CR"	\
+	: "=r" (__val) : : "cc");			\
+	__val;						\
+	})
+
+extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
+extern unsigned long cr_alignment;	/* defined in entry-armv.S */
+
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#define vectors_base()	(0)
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define rmb() mb()
+#define wmb() mb()
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/*
+ * We assume knowledge of how
+ * spin_unlock_irq() and friends are implemented.  This avoids
+ * us needlessly decrementing and incrementing the preempt count.
+ */
+#define prepare_arch_switch(rq,next)	local_irq_enable()
+#define finish_arch_switch(rq,prev)	spin_unlock(&(rq)->lock)
+#define task_running(rq,p)		((rq)->curr == (p))
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last)					\
+do {									\
+	last = __switch_to(prev,prev->thread_info,next->thread_info);	\
+} while (0)
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#define local_irq_save(x)                               \
+        do {                                            \
+          unsigned long temp;                           \
+          __asm__ __volatile__(                         \
+"       mov     %0, pc          @ save_flags_cli\n"     \
+"       orr     %1, %0, #0x08000000\n"                  \
+"       and     %0, %0, #0x0c000000\n"                  \
+"       teqp    %1, #0\n"                               \
+          : "=r" (x), "=r" (temp)                       \
+          :                                             \
+          : "memory");                                  \
+        } while (0)
+
+/*
+ * Enable IRQs  (sti)
+ */
+#define local_irq_enable()                                      \
+        do {                                    \
+          unsigned long temp;                   \
+          __asm__ __volatile__(                 \
+"       mov     %0, pc          @ sti\n"        \
+"       bic     %0, %0, #0x08000000\n"          \
+"       teqp    %0, #0\n"                       \
+          : "=r" (temp)                         \
+          :                                     \
+          : "memory");                          \
+        } while(0)
+
+/*
+ * Disable IRQs (cli)
+ */
+#define local_irq_disable()                                     \
+        do {                                    \
+          unsigned long temp;                   \
+          __asm__ __volatile__(                 \
+"       mov     %0, pc          @ cli\n"        \
+"       orr     %0, %0, #0x08000000\n"          \
+"       teqp    %0, #0\n"                       \
+          : "=r" (temp)                         \
+          :                                     \
+          : "memory");                          \
+        } while(0)
+
+/* Enable FIQs (stf) */
+
+#define __stf() do {                            \
+        unsigned long temp;                     \
+        __asm__ __volatile__(                   \
+"       mov     %0, pc          @ stf\n"        \
+"       bic     %0, %0, #0x04000000\n"          \
+"       teqp    %0, #0\n"                       \
+        : "=r" (temp));                         \
+    } while(0)
+
+/* Disable FIQs  (clf) */
+
+#define __clf() do {                            \
+        unsigned long temp;                     \
+        __asm__ __volatile__(                   \
+"       mov     %0, pc          @ clf\n"        \
+"       orr     %0, %0, #0x04000000\n"          \
+"       teqp    %0, #0\n"                       \
+        : "=r" (temp));                         \
+    } while(0)
+
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define local_save_flags(x)                             \
+        do {                                    \
+          __asm__ __volatile__(                 \
+"       mov     %0, pc          @ save_flags\n" \
+"       and     %0, %0, #0x0c000000\n"          \
+          : "=r" (x));                          \
+        } while (0)
+
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(x)                            \
+        do {                                            \
+          unsigned long temp;                           \
+          __asm__ __volatile__(                         \
+"       mov     %0, pc          @ restore_flags\n"      \
+"       bic     %0, %0, #0x0c000000\n"                  \
+"       orr     %0, %0, %1\n"                           \
+"       teqp    %0, #0\n"                               \
+          : "=&r" (temp)                                \
+          : "r" (x)                                     \
+          : "memory");                                  \
+        } while (0)
+
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#define smp_mb()		barrier()
+#define smp_rmb()		barrier()
+#define smp_wmb()		barrier()
+#define smp_read_barrier_depends()		do { } while(0)
+
+#define clf()			__clf()
+#define stf()			__stf()
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	flags & PSR_I_BIT;		\
+})
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+        extern void __bad_xchg(volatile void *, int);
+
+        switch (size) {
+                case 1: return cpu_xchg_1(x, ptr);
+                case 4: return cpu_xchg_4(x, ptr);
+                default: __bad_xchg(ptr, size);
+        }
+        return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/termbits.h b/include/asm-arm26/termbits.h
new file mode 100644
index 000000000000..bbc6e1d24d3f
--- /dev/null
+++ b/include/asm-arm26/termbits.h
@@ -0,0 +1,171 @@
+#ifndef __ASM_ARM_TERMBITS_H
+#define __ASM_ARM_TERMBITS_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR    010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/include/asm-arm26/termios.h b/include/asm-arm26/termios.h
new file mode 100644
index 000000000000..7b8f5e8ae063
--- /dev/null
+++ b/include/asm-arm26/termios.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_ARM_TERMIOS_H
+#define __ASM_ARM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
+	unsigned short __tmp;					\
+	get_user(__tmp,&(termio)->x);				\
+	*(unsigned short *) &(termios)->x = __tmp;		\
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/include/asm-arm26/thread_info.h b/include/asm-arm26/thread_info.h
new file mode 100644
index 000000000000..50f41b50268a
--- /dev/null
+++ b/include/asm-arm26/thread_info.h
@@ -0,0 +1,144 @@
+/*
+ *  linux/include/asm-arm26/thread_info.h
+ *
+ *  Copyright (C) 2002 Russell King.
+ *  Copyright (C) 2003 Ian Molton.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	sl;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * We assume cpu_context follows immedately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	__s32			preempt_count;	/* 0 => preemptable, <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain      *exec_domain;   /* execution domain */
+	__u32			cpu;		/* cpu */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	struct restart_block    restart_block;
+	union fp_state		fpstate;
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		&tsk,			\
+	.exec_domain	&default_exec_domain,	\
+	.flags		0,			\
+	.preempt_count	0,			\
+	.addr_limit	KERNEL_DS,		\
+	.restart_block  = {                             \
+		.fn     = do_no_restart_syscall,        \
+	},                                              \
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~0x1fff);
+}
+
+/* FIXME - PAGE_SIZE < 32K */
+#define THREAD_SIZE		(8*32768) // FIXME - this needs attention (see kernel/fork.c which gets a nice div by zero if this is lower than 8*32768
+#define __get_user_regs(x) (((struct pt_regs *)((unsigned long)(x) + THREAD_SIZE - 8)) - 1)
+
+extern struct thread_info *alloc_thread_info(struct task_struct *task);
+extern void free_thread_info(struct thread_info *);
+
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(pc_pointer((tsk)->thread_info->cpu_context.pc)))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)((tsk)->thread_info->cpu_context.fp))
+
+#else /* !__ASSEMBLY__ */
+
+#define TI_FLAGS	0
+#define TI_PREEMPT	4
+#define TI_ADDR_LIMIT	8
+#define TI_TASK		12
+#define TI_EXEC_DOMAIN  16
+#define TI_CPU		20
+#define TI_CPU_SAVE	24
+#define TI_RESTART_BLOCK 28
+#define TI_FPSTATE	68
+
+#endif
+
+#define PREEMPT_ACTIVE	0x04000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_NOTIFY_RESUME	- resumption notification requested
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_NOTIFY_RESUME	0
+#define TIF_SIGPENDING		1
+#define TIF_NEED_RESCHED	2
+#define TIF_SYSCALL_TRACE	8
+#define TIF_USED_FPU		16
+#define TIF_POLLING_NRFLAG	17
+#define TIF_MEMDIE		18
+
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_USED_FPU		(1 << TIF_USED_FPU)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm26/timex.h b/include/asm-arm26/timex.h
new file mode 100644
index 000000000000..68322fbc1aed
--- /dev/null
+++ b/include/asm-arm26/timex.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/include/asm-arm/timex.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE         2000000
+
+/* IS THAT RIGHT ON A5000? FIXME */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif
diff --git a/include/asm-arm26/tlb.h b/include/asm-arm26/tlb.h
new file mode 100644
index 000000000000..1316352a58f3
--- /dev/null
+++ b/include/asm-arm26/tlb.h
@@ -0,0 +1,78 @@
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+        struct mm_struct        *mm;
+        unsigned int            freed;
+	unsigned int            fullmm;
+
+        unsigned int            flushes;
+        unsigned int            avoided_flushes;
+};
+
+extern struct mmu_gather mmu_gathers[NR_CPUS];
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+        int cpu = smp_processor_id();
+        struct mmu_gather *tlb = &mmu_gathers[cpu];
+
+        tlb->mm = mm;
+        tlb->freed = 0;
+	tlb->fullmm = full_mm_flush;
+
+        return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+        struct mm_struct *mm = tlb->mm;
+        unsigned long freed = tlb->freed;
+        int rss = get_mm_counter(mm, rss);
+
+        if (rss < freed)
+                freed = rss;
+        add_mm_counter(mm, rss, -freed);
+
+        if (freed) {
+                flush_tlb_mm(mm);
+                tlb->flushes++;
+        } else {
+                tlb->avoided_flushes++;
+        }
+
+        /* keep the page table cache within bounds */
+        check_pgt_cache();
+}
+
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+     return tlb->fullmm;
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address)  do { } while (0)
+//#define tlb_start_vma(tlb,vma)                  do { } while (0)
+//FIXME - ARM32 uses this now that things changed in the kernel. seems like it may be pointless on arm26, however to get things compiling...
+#define tlb_start_vma(tlb,vma)                                          \
+        do {                                                            \
+                if (!tlb->fullmm)                                       \
+                        flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+        } while (0)
+#define tlb_end_vma(tlb,vma)                    do { } while (0)
+
+#define tlb_remove_page(tlb,page)       free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb,ptep)          pte_free(ptep)
+#define pmd_free_tlb(tlb,pmdp)          pmd_free(pmdp)
+
+#endif
diff --git a/include/asm-arm26/tlbflush.h b/include/asm-arm26/tlbflush.h
new file mode 100644
index 000000000000..f79c1cbf4f69
--- /dev/null
+++ b/include/asm-arm26/tlbflush.h
@@ -0,0 +1,70 @@
+#ifndef __ASMARM_TLBFLUSH_H
+#define __ASMARM_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ */
+
+#define flush_tlb_all()				memc_update_all()
+#define flush_tlb_mm(mm)			memc_update_mm(mm)
+#define flush_tlb_page(vma, vmaddr)		do { printk("flush_tlb_page\n");} while (0)  // IS THIS RIGHT?
+#define flush_tlb_range(vma,start,end)		\
+		do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0)
+#define flush_tlb_pgtables(mm,start,end)        do { printk("flush_tlb_pgtables\n");} while (0)
+#define flush_tlb_kernel_range(s,e)             do { printk("flush_tlb_range\n");} while (0)
+
+/*
+ * The following handle the weird MEMC chip
+ */
+static inline void memc_update_all(void)
+{
+	struct task_struct *p;
+	cpu_memc_update_all(init_mm.pgd);
+	for_each_process(p) {
+		if (!p->mm)
+			continue;
+		cpu_memc_update_all(p->mm->pgd);
+	}
+	processor._set_pgd(current->active_mm->pgd);
+}
+
+static inline void memc_update_mm(struct mm_struct *mm)
+{
+	cpu_memc_update_all(mm->pgd);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_clear(struct mm_struct *mm, struct page *page)
+{
+	cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr)
+{
+	cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	struct mm_struct *mm = vma->vm_mm;
+printk("update_mmu_cache\n");
+	memc_update_addr(mm, pte, addr);
+}
+
+#endif
diff --git a/include/asm-arm26/topology.h b/include/asm-arm26/topology.h
new file mode 100644
index 000000000000..accbd7cad9b5
--- /dev/null
+++ b/include/asm-arm26/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_TOPOLOGY_H
+#define _ASM_ARM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/include/asm-arm26/types.h b/include/asm-arm26/types.h
new file mode 100644
index 000000000000..56cbe573a234
--- /dev/null
+++ b/include/asm-arm26/types.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/uaccess-asm.h b/include/asm-arm26/uaccess-asm.h
new file mode 100644
index 000000000000..19f798e338c9
--- /dev/null
+++ b/include/asm-arm26/uaccess-asm.h
@@ -0,0 +1,153 @@
+/*
+ *  linux/include/asm-arm/proc-armo/uaccess.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The fs functions are implemented on the ARM2 and ARM3 architectures
+ * manually.
+ * Use *_user functions to access user memory with faulting behaving
+ *   as though the user is accessing the memory.
+ * Use set_fs(get_ds()) and then the *_user functions to allow them to
+ *   access kernel memory.
+ */
+
+/*
+ * These are the values used to represent the user `fs' and the kernel `ds'
+ * FIXME - the KERNEL_DS should end at 0x03000000 but we want to access ROM at
+ * 0x03400000. ideally we want to forbid access to the IO space inbetween.
+ */
+#define KERNEL_DS	0x03FFFFFF
+#define USER_DS   	0x02000000
+
+extern uaccess_t uaccess_user, uaccess_kernel;
+
+static inline void set_fs (mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+	current->thread.uaccess = (fs == USER_DS ? &uaccess_user : &uaccess_kernel);
+}
+
+#define __range_ok(addr,size) ({					\
+	unsigned long flag, sum;					\
+	__asm__ __volatile__("subs %1, %0, %3; cmpcs %1, %2; movcs %0, #0" \
+		: "=&r" (flag), "=&r" (sum)				\
+		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit)	\
+		: "cc");						\
+	flag; })
+
+#define __addr_ok(addr) ({						\
+	unsigned long flag;						\
+	__asm__ __volatile__("cmp %2, %0; movlo %0, #0"			\
+		: "=&r" (flag)						\
+		: "0" (current_thread_info()->addr_limit), "r" (addr)	\
+		: "cc");						\
+	(flag == 0); })
+
+#define __put_user_asm_byte(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %1\n"					\
+	"	mov	r1, %2\n"					\
+	"	mov	r2, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r2\n"					\
+	: "=r" (err)							\
+	: "r" (x), "r" (addr), "r" (current->thread.uaccess->put_byte),	\
+	  "0" (err)							\
+	: "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_half(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %1\n"					\
+	"	mov	r1, %2\n"					\
+	"	mov	r2, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r2\n"					\
+	: "=r" (err)							\
+	: "r" (x), "r" (addr), "r" (current->thread.uaccess->put_half),	\
+	  "0" (err)							\
+	: "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_word(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %1\n"					\
+	"	mov	r1, %2\n"					\
+	"	mov	r2, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r2\n"					\
+	: "=r" (err)							\
+	: "r" (x), "r" (addr), "r" (current->thread.uaccess->put_word),	\
+	  "0" (err)							\
+	: "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_dword(x,addr,err)                                 \
+        __asm__ __volatile__(                                           \
+        "       mov     r0, %1\n"                                       \
+        "       mov     r1, %2\n"                                       \
+        "       mov     r2, %0\n"                                       \
+        "       mov     lr, pc\n"                                       \
+        "       mov     pc, %3\n"                                       \
+        "       mov     %0, r2\n"                                       \
+        : "=r" (err)                                                    \
+        : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_dword), \
+          "0" (err)                                                     \
+        : "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_byte(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %2\n"					\
+	"	mov	r1, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r1\n"					\
+	"	mov	%1, r0\n"					\
+	: "=r" (err), "=r" (x)						\
+	: "r" (addr), "r" (current->thread.uaccess->get_byte), "0" (err)	\
+	: "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_half(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %2\n"					\
+	"	mov	r1, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r1\n"					\
+	"	mov	%1, r0\n"					\
+	: "=r" (err), "=r" (x)						\
+	: "r" (addr), "r" (current->thread.uaccess->get_half), "0" (err)	\
+	: "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_word(x,addr,err)					\
+	__asm__ __volatile__(						\
+	"	mov	r0, %2\n"					\
+	"	mov	r1, %0\n"					\
+	"	mov	lr, pc\n"					\
+	"	mov	pc, %3\n"					\
+	"	mov	%0, r1\n"					\
+	"	mov	%1, r0\n"					\
+	: "=r" (err), "=r" (x)						\
+	: "r" (addr), "r" (current->thread.uaccess->get_word), "0" (err)	\
+	: "r0", "r1", "r2", "lr")
+
+#define __do_copy_from_user(to,from,n)					\
+	(n) = current->thread.uaccess->copy_from_user((to),(from),(n))
+
+#define __do_copy_to_user(to,from,n)					\
+	(n) = current->thread.uaccess->copy_to_user((to),(from),(n))
+
+#define __do_clear_user(addr,sz)					\
+	(sz) = current->thread.uaccess->clear_user((addr),(sz))
+
+#define __do_strncpy_from_user(dst,src,count,res)			\
+	(res) = current->thread.uaccess->strncpy_from_user(dst,src,count)
+
+#define __do_strnlen_user(s,n,res)					\
+	(res) = current->thread.uaccess->strnlen_user(s,n)
diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h
new file mode 100644
index 000000000000..ab9ce38c6aec
--- /dev/null
+++ b/include/asm-arm26/uaccess.h
@@ -0,0 +1,299 @@
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+extern int fixup_exception(struct pt_regs *regs);
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define segment_eq(a,b)	((a) == (b))
+
+#include <asm/uaccess-asm.h>
+
+#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void * addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * Single-value transfer routines.  They automatically use the right
+ * size if we just have the right pointer type.  Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value.  This means zeroing out the destination variable
+ * or buffer on error.  Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path.  When we only write to user space, there is no
+ * problem.
+ *
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success.  Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+extern int __get_user_8(void *);
+extern int __get_user_bad(void);
+
+#define __get_user_x(__r1,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ ("bl	__get_user_" #__s		\
+		: "=&r" (__e), "=r" (__r1)				\
+		: "0" (__p)						\
+		: __i)
+
+#define get_user(x,p)							\
+	({								\
+		const register typeof(*(p)) *__p asm("r0") = (p);	\
+		register typeof(*(p)) __r1 asm("r1");			\
+		register int __e asm("r0");				\
+		switch (sizeof(*(p))) {					\
+		case 1:							\
+			__get_user_x(__r1, __p, __e, 1, "lr");		\
+	       		break;						\
+		case 2:							\
+			__get_user_x(__r1, __p, __e, 2, "r2", "lr");	\
+			break;						\
+		case 4:							\
+	       		__get_user_x(__r1, __p, __e, 4, "lr");		\
+			break;						\
+		case 8:							\
+			__get_user_x(__r1, __p, __e, 8, "lr");		\
+	       		break;						\
+		default: __e = __get_user_bad(); break;			\
+		}							\
+		x = __r1;						\
+		__e;							\
+	})
+
+
+#define __get_user(x,ptr)                                               \
+({                                                                      \
+        long __gu_err = 0;                                              \
+        __get_user_err((x),(ptr),__gu_err);                             \
+        __gu_err;                                                       \
+})
+
+#define __get_user_error(x,ptr,err)                                     \
+({                                                                      \
+        __get_user_err((x),(ptr),err);                                  \
+        (void) 0;                                                       \
+})
+
+#define __get_user_err(x,ptr,err)                                       \
+do {                                                                    \
+        unsigned long __gu_addr = (unsigned long)(ptr);                 \
+        unsigned long __gu_val;                                         \
+        switch (sizeof(*(ptr))) {                                       \
+        case 1: __get_user_asm_byte(__gu_val,__gu_addr,err);    break;  \
+        case 2: __get_user_asm_half(__gu_val,__gu_addr,err);    break;  \
+        case 4: __get_user_asm_word(__gu_val,__gu_addr,err);    break;  \
+        default: (__gu_val) = __get_user_bad();                         \
+        }                                                               \
+        (x) = (__typeof__(*(ptr)))__gu_val;                             \
+} while (0)
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+extern int __put_user_bad(void);
+
+#define __put_user_x(__r1,__p,__e,__s)                                  \
+           __asm__ __volatile__ (                                       \
+                __asmeq("%0", "r0") __asmeq("%2", "r1")                 \
+                "bl     __put_user_" #__s                               \
+                : "=&r" (__e)                                           \
+                : "0" (__p), "r" (__r1)                                 \
+                : "ip", "lr", "cc")
+
+#define put_user(x,p)                                                   \
+        ({                                                              \
+                const register typeof(*(p)) __r1 asm("r1") = (x);       \
+                const register typeof(*(p)) *__p asm("r0") = (p);       \
+                register int __e asm("r0");                             \
+                switch (sizeof(*(__p))) {                               \
+                case 1:                                                 \
+                        __put_user_x(__r1, __p, __e, 1);                \
+                        break;                                          \
+                case 2:                                                 \
+                        __put_user_x(__r1, __p, __e, 2);                \
+                        break;                                          \
+                case 4:                                                 \
+                        __put_user_x(__r1, __p, __e, 4);                \
+                        break;                                          \
+                case 8:                                                 \
+                        __put_user_x(__r1, __p, __e, 8);                \
+                        break;                                          \
+                default: __e = __put_user_bad(); break;                 \
+                }                                                       \
+                __e;                                                    \
+        })
+
+#if 0
+/*********************   OLD METHOD *******************/
+#define __put_user_x(__r1,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ ("bl	__put_user_" #__s		\
+		: "=&r" (__e)						\
+		: "0" (__p), "r" (__r1)					\
+		: __i)
+
+#define put_user(x,p)							\
+	({								\
+		const register typeof(*(p)) __r1 asm("r1") = (x);	\
+		const register typeof(*(p)) *__p asm("r0") = (p);	\
+		register int __e asm("r0");				\
+		switch (sizeof(*(p))) {					\
+		case 1:							\
+			__put_user_x(__r1, __p, __e, 1, "r2", "lr");	\
+			break;						\
+		case 2:							\
+			__put_user_x(__r1, __p, __e, 2, "r2", "lr");	\
+			break;						\
+		case 4:							\
+			__put_user_x(__r1, __p, __e, 4, "r2", "lr");	\
+			break;						\
+		case 8:							\
+			__put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr");	\
+			break;						\
+		default: __e = __put_user_bad(); break;			\
+		}							\
+		__e;							\
+	})
+/*************************************************/
+#endif
+
+#define __put_user(x,ptr)                                               \
+({                                                                      \
+        long __pu_err = 0;                                              \
+        __put_user_err((x),(ptr),__pu_err);                             \
+        __pu_err;                                                       \
+})
+
+#define __put_user_error(x,ptr,err)                                     \
+({                                                                      \
+        __put_user_err((x),(ptr),err);                                  \
+        (void) 0;                                                       \
+})
+
+#define __put_user_err(x,ptr,err)                                       \
+do {                                                                    \
+        unsigned long __pu_addr = (unsigned long)(ptr);                 \
+        __typeof__(*(ptr)) __pu_val = (x);                              \
+        switch (sizeof(*(ptr))) {                                       \
+        case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);    break;  \
+        case 2: __put_user_asm_half(__pu_val,__pu_addr,err);    break;  \
+        case 4: __put_user_asm_word(__pu_val,__pu_addr,err);    break;  \
+        case 8: __put_user_asm_dword(__pu_val,__pu_addr,err);   break;  \
+        default: __put_user_bad();                                      \
+        }                                                               \
+} while (0)
+
+static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		__do_copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memzero(to, n);
+	return n;
+}
+
+static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n)
+{
+	__do_copy_from_user(to, from, n);
+	return n;
+}
+
+static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		__do_copy_to_user(to, from, n);
+	return n;
+}
+
+static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n)
+{
+	__do_copy_to_user(to, from, n);
+	return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static __inline__ unsigned long clear_user (void *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		__do_clear_user(to, n);
+	return n;
+}
+
+static __inline__ unsigned long __clear_user (void *to, unsigned long n)
+{
+	__do_clear_user(to, n);
+	return n;
+}
+
+static __inline__ long strncpy_from_user (char *dst, const char *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		__do_strncpy_from_user(dst, src, count, res);
+	return res;
+}
+
+static __inline__ long __strncpy_from_user (char *dst, const char *src, long count)
+{
+	long res;
+	__do_strncpy_from_user(dst, src, count, res);
+	return res;
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long strnlen_user(const char *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		__do_strnlen_user(s, n, res);
+
+	return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm26/ucontext.h b/include/asm-arm26/ucontext.h
new file mode 100644
index 000000000000..f853130137cc
--- /dev/null
+++ b/include/asm-arm26/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASMARM_UCONTEXT_H
+#define _ASMARM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/include/asm-arm26/unaligned.h b/include/asm-arm26/unaligned.h
new file mode 100644
index 000000000000..d992782089fd
--- /dev/null
+++ b/include/asm-arm26/unaligned.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_ARM_UNALIGNED_H
+#define __ASM_ARM_UNALIGNED_H
+
+#include <asm/types.h>
+
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file.  Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	3		7	3
+ *	8		20	6		16	6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	4		7	4
+ *	8		19	8		15	6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers).  Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2_le(__p)					\
+	(__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4_le(__p)					\
+	(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define __get_unaligned_le(ptr)					\
+	({							\
+		__typeof__(*(ptr)) __v;				\
+		__u8 *__p = (__u8 *)(ptr);			\
+		switch (sizeof(*(ptr))) {			\
+		case 1:	__v = *(ptr);			break;	\
+		case 2: __v = __get_unaligned_2_le(__p);	break;	\
+		case 4: __v = __get_unaligned_4_le(__p);	break;	\
+		case 8: {					\
+				unsigned int __v1, __v2;	\
+				__v2 = __get_unaligned_4_le((__p+4)); \
+				__v1 = __get_unaligned_4_le(__p);	\
+				__v = ((unsigned long long)__v2 << 32 | __v1);	\
+			}					\
+			break;					\
+		default: __v = __bug_unaligned_x(__p);	break;	\
+		}						\
+		__v;						\
+	})
+
+static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p)
+{
+	*__p++ = __v;
+	*__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p)
+{
+	__put_unaligned_2_le(__v >> 16, __p + 2);
+	__put_unaligned_2_le(__v, __p);
+}
+
+static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p)
+{
+	/*
+	 * tradeoff: 8 bytes of stack for all unaligned puts (2
+	 * instructions), or an extra register in the long long
+	 * case - go for the extra register.
+	 */
+	__put_unaligned_4_le(__v >> 32, __p+4);
+	__put_unaligned_4_le(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define __put_unaligned_le(val,ptr)					\
+	({							\
+		switch (sizeof(*(ptr))) {			\
+		case 1:						\
+			*(ptr) = (val);				\
+			break;					\
+		case 2: __put_unaligned_2_le((val),(__u8 *)(ptr));	\
+			break;					\
+		case 4:	__put_unaligned_4_le((val),(__u8 *)(ptr));	\
+			break;					\
+		case 8:	__put_unaligned_8_le((val),(__u8 *)(ptr)); \
+			break;					\
+		default: __bug_unaligned_x(ptr);		\
+			break;					\
+		}						\
+		(void) 0;					\
+	})
+
+/*
+ * Select endianness
+ */
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif
diff --git a/include/asm-arm26/uncompress.h b/include/asm-arm26/uncompress.h
new file mode 100644
index 000000000000..df2cba816a4e
--- /dev/null
+++ b/include/asm-arm26/uncompress.h
@@ -0,0 +1,111 @@
+/*
+ *  linux/include/asm-arm/arch-arc/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)0x02000000)
+ 
+int video_num_columns, video_num_lines, video_size_row;
+int white, bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static struct param_struct *params = (struct param_struct *)0x0207c000;
+ 
+/*
+ * This does not append a newline
+ */
+static void puts(const char *s)
+{
+	extern void ll_write_char(char *, unsigned long);
+	int x,y;
+	unsigned char c;
+	char *ptr;
+
+	x = params->video_x;
+	y = params->video_y;
+
+	while ( ( c = *(unsigned char *)s++ ) != '\0' ) {
+		if ( c == '\n' ) {
+			x = 0;
+			if ( ++y >= video_num_lines ) {
+				y--;
+			}
+		} else {
+			ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h);
+			ll_write_char(ptr, c|(white<<16));
+			if ( ++x >= video_num_columns ) {
+				x = 0;
+				if ( ++y >= video_num_lines ) {
+					y--;
+				}
+			}
+		}
+	}
+
+	params->video_x = x;
+	params->video_y = y;
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	
+	video_num_lines = params->video_num_rows;
+	video_num_columns = params->video_num_cols;
+	bytes_per_char_h = params->bytes_per_char_h;
+	video_size_row = video_num_columns * bytes_per_char_h;
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+	white = bytes_per_char_h == 8 ? 0xfc : 7;
+
+	if (params->nr_pages * params->page_size < 4096*1024) error("<4M of mem\n");
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h
new file mode 100644
index 000000000000..dfa0b0c30aa3
--- /dev/null
+++ b/include/asm-arm26/unistd.h
@@ -0,0 +1,500 @@
+/*
+ *  linux/include/asm-arm/unistd.h
+ *
+ *  Copyright (C) 2001-2003 Russell King
+ *  Modified 25/11/04 Ian Molton for arm26.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to spyro@f2s.com
+ * no matter what the change is.  Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#include <linux/linkage.h>
+
+#define __NR_SYSCALL_BASE	0x900000
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+					/* 256 for set_tid_address */
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+
+/*
+ * The following SWIs are ARM private. FIXME - make appropriate for arm26
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+
+#define __sys2(x) #x
+#define __sys1(x) __sys2(x)
+
+#ifndef __syscall
+#define __syscall(name) "swi\t" __sys1(__NR_##name) ""
+#endif
+
+#define __syscall_return(type, res)					\
+do {									\
+	if ((unsigned long)(res) >= (unsigned long)(-125)) {		\
+		errno = -(res);						\
+		res = -1;						\
+	}								\
+	return (type) (res);						\
+} while (0)
+
+#define _syscall0(type,name)						\
+type name(void) {							\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	:								\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall1(type,name,type1,arg1) 				\
+type name(type1 arg1) { 						\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0)							\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1,type2 arg2) {					\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1) 					\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1,type2 arg2,type3 arg3) {				\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2)				\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4)\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) {		\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3)			\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+  
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5)	\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) {	\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __r4 __asm__("r4") = (long)arg5;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3),"r" (__r4)	\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6)	\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) {	\
+  register long __r0 __asm__("r0") = (long)arg1;			\
+  register long __r1 __asm__("r1") = (long)arg2;			\
+  register long __r2 __asm__("r2") = (long)arg3;			\
+  register long __r3 __asm__("r3") = (long)arg4;			\
+  register long __r4 __asm__("r4") = (long)arg5;			\
+  register long __r5 __asm__("r5") = (long)arg6;			\
+  register long __res_r0 __asm__("r0");					\
+  long __res;								\
+  __asm__ __volatile__ (						\
+  __syscall(name)							\
+	: "=r" (__res_r0)						\
+	: "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3), "r" (__r4),"r" (__r5)		\
+	: "lr");							\
+  __res = __res_r0;							\
+  __syscall_return(type,__res);						\
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/syscalls.h>
+
+extern long execve(const char *file, char **argv, char **envp);
+
+struct pt_regs;
+asmlinkage int sys_execve(char *filenamei, char **argv, char **envp,
+			struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			struct pt_regs *regs);
+asmlinkage int sys_fork(struct pt_regs *regs);
+asmlinkage int sys_vfork(struct pt_regs *regs);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm26/user.h b/include/asm-arm26/user.h
new file mode 100644
index 000000000000..3e8b0f879159
--- /dev/null
+++ b/include/asm-arm26/user.h
@@ -0,0 +1,84 @@
+#ifndef _ARM_USER_H
+#define _ARM_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_fp {
+	struct fp_reg {
+		unsigned int sign1:1;
+		unsigned int unused:15;
+		unsigned int sign2:1;
+		unsigned int exponent:14;
+		unsigned int j:1;
+		unsigned int mantissa1:31;
+		unsigned int mantissa0:32;
+	} fpregs[8];
+	unsigned int fpsr:32;
+	unsigned int fpcr:32;
+	unsigned char ftype[8];
+	unsigned int init_flag;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct pt_regs regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  struct pt_regs * u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+  struct user_fp u_fp;		/* FP state */
+  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
+  				/* the FP registers. */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ARM_USER_H */
diff --git a/include/asm-arm26/xor.h b/include/asm-arm26/xor.h
new file mode 100644
index 000000000000..e7c4cf58bed1
--- /dev/null
+++ b/include/asm-arm26/xor.h
@@ -0,0 +1,141 @@
+/*
+ *  linux/include/asm-arm/xor.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+	__asm__("ldmia	%0, {%1, %2}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2) \
+		: "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+		: "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+	__asm__("ldmia	%0!, {%1, %2}" \
+		: "=r" (src), "=r" (b1), "=r" (b2) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		XOR_BLOCK_4(p3);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		XOR_BLOCK_2(p5);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+	.name	= "arm4regs",
+	.do_2	= xor_arm4regs_2,
+	.do_3	= xor_arm4regs_3,
+	.do_4	= xor_arm4regs_4,
+	.do_5	= xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_arm4regs);	\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_32regs);	\
+	} while (0)
diff --git a/include/asm-cris/a.out.h b/include/asm-cris/a.out.h
new file mode 100644
index 000000000000..770734ce54a6
--- /dev/null
+++ b/include/asm-cris/a.out.h
@@ -0,0 +1,31 @@
+#ifndef __CRIS_A_OUT_H__
+#define __CRIS_A_OUT_H__
+
+/* we don't support a.out binaries on Linux/CRIS anyway, so this is
+ * not really used but still needed because binfmt_elf.c for some reason
+ * wants to know about a.out even if there is no interpreter available...
+ */
+
+/* grabbed from the intel stuff  */   
+#define STACK_TOP TASK_SIZE
+
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+
+#endif
diff --git a/include/asm-cris/arch-v10/bitops.h b/include/asm-cris/arch-v10/bitops.h
new file mode 100644
index 000000000000..21b7ae8c9bb3
--- /dev/null
+++ b/include/asm-cris/arch-v10/bitops.h
@@ -0,0 +1,73 @@
+/* asm/arch/bitops.h for Linux/CRISv10 */
+
+#ifndef _CRIS_ARCH_BITOPS_H
+#define _CRIS_ARCH_BITOPS_H
+
+/*
+ * Helper functions for the core of the ff[sz] functions, wrapping the
+ * syntactically awkward asms.  The asms compute the number of leading
+ * zeroes of a bits-in-byte and byte-in-word and word-in-dword-swapped
+ * number.  They differ in that the first function also inverts all bits
+ * in the input.
+ */
+extern inline unsigned long cris_swapnwbrlz(unsigned long w)
+{
+	/* Let's just say we return the result in the same register as the
+	   input.  Saying we clobber the input but can return the result
+	   in another register:
+	   !  __asm__ ("swapnwbr %2\n\tlz %2,%0"
+	   !	      : "=r,r" (res), "=r,X" (dummy) : "1,0" (w));
+	   confuses gcc (sched.c, gcc from cris-dist-1.14).  */
+
+	unsigned long res;
+	__asm__ ("swapnwbr %0 \n\t"
+		 "lz %0,%0"
+		 : "=r" (res) : "0" (w));
+	return res;
+}
+
+extern inline unsigned long cris_swapwbrlz(unsigned long w)
+{
+	unsigned res;
+	__asm__ ("swapwbr %0 \n\t"
+		 "lz %0,%0"
+		 : "=r" (res)
+		 : "0" (w));
+	return res;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+extern inline unsigned long ffz(unsigned long w)
+{
+	return cris_swapnwbrlz(w);
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+extern __inline__ unsigned long __ffs(unsigned long word)
+{
+	return cris_swapnwbrlz(~word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+extern inline unsigned long kernel_ffs(unsigned long w)
+{
+	return w ? cris_swapwbrlz (w) + 1 : 0;
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/byteorder.h b/include/asm-cris/arch-v10/byteorder.h
new file mode 100644
index 000000000000..e24465d1f40d
--- /dev/null
+++ b/include/asm-cris/arch-v10/byteorder.h
@@ -0,0 +1,26 @@
+#ifndef _CRIS_ARCH_BYTEORDER_H
+#define _CRIS_ARCH_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+/* we just define these two (as we can do the swap in a single
+ * asm instruction in CRIS) and the arch-independent files will put
+ * them together into ntohl etc.
+ */
+
+extern __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
+  
+	return(x);
+}
+
+extern __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__ ("swapb %0" : "=r" (x) : "0" (x));
+	
+	return(x);
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/cache.h b/include/asm-cris/arch-v10/cache.h
new file mode 100644
index 000000000000..1d1d1ba65b1a
--- /dev/null
+++ b/include/asm-cris/arch-v10/cache.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_ARCH_CACHE_H
+#define _ASM_ARCH_CACHE_H
+
+/* Etrax 100LX have 32-byte cache-lines. */
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_SHIFT_MAX 5
+
+#endif /* _ASM_ARCH_CACHE_H */
diff --git a/include/asm-cris/arch-v10/checksum.h b/include/asm-cris/arch-v10/checksum.h
new file mode 100644
index 000000000000..fde1d00aaa90
--- /dev/null
+++ b/include/asm-cris/arch-v10/checksum.h
@@ -0,0 +1,29 @@
+#ifndef _CRIS_ARCH_CHECKSUM_H
+#define _CRIS_ARCH_CHECKSUM_H
+
+/* Checksum some values used in TCP/UDP headers.
+ *
+ * The gain by doing this in asm is that C will not generate carry-additions
+ * for the 32-bit components of the checksum, so otherwise we would have had
+ * to split all of those into 16-bit components, then add.
+ */
+
+extern inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		   unsigned short proto, unsigned int sum)
+{
+	int res;
+	__asm__ ("add.d %2, %0\n\t"
+		 "ax\n\t"
+		 "add.d %3, %0\n\t"
+		 "ax\n\t"
+		 "add.d %4, %0\n\t"
+		 "ax\n\t"
+		 "addq 0, %0\n"
+	: "=r" (res)
+	: "0" (sum), "r" (daddr), "r" (saddr), "r" ((ntohs(len) << 16) + (proto << 8)));
+
+	return res;
+}	
+
+#endif
diff --git a/include/asm-cris/arch-v10/delay.h b/include/asm-cris/arch-v10/delay.h
new file mode 100644
index 000000000000..cfedae0d2f53
--- /dev/null
+++ b/include/asm-cris/arch-v10/delay.h
@@ -0,0 +1,20 @@
+#ifndef _CRIS_ARCH_DELAY_H
+#define _CRIS_ARCH_DELAY_H
+
+extern __inline__ void __delay(int loops)
+{
+	__asm__ __volatile__ (
+			      "move.d %0,$r9\n\t"
+			      "beq 2f\n\t"
+			      "subq 1,$r9\n\t"
+			      "1:\n\t"
+			      "bne 1b\n\t"
+			      "subq 1,$r9\n"
+			      "2:"
+			      : : "g" (loops) : "r9");
+}
+
+#endif /* defined(_CRIS_ARCH_DELAY_H) */
+
+
+
diff --git a/include/asm-cris/arch-v10/dma.h b/include/asm-cris/arch-v10/dma.h
new file mode 100644
index 000000000000..9e078b9bc934
--- /dev/null
+++ b/include/asm-cris/arch-v10/dma.h
@@ -0,0 +1,46 @@
+/* Defines for using and allocating dma channels. */
+
+#ifndef _ASM_ARCH_DMA_H
+#define _ASM_ARCH_DMA_H
+
+#define MAX_DMA_CHANNELS	10
+
+/* dma0 and dma1 used for network (ethernet) */
+#define NETWORK_TX_DMA_NBR 0
+#define NETWORK_RX_DMA_NBR 1
+
+/* dma2 and dma3 shared by par0, scsi0, ser2 and ata */
+#define PAR0_TX_DMA_NBR 2
+#define PAR0_RX_DMA_NBR 3
+#define SCSI0_TX_DMA_NBR 2
+#define SCSI0_RX_DMA_NBR 3
+#define SER2_TX_DMA_NBR 2
+#define SER2_RX_DMA_NBR 3
+#define ATA_TX_DMA_NBR 2
+#define ATA_RX_DMA_NBR 3
+
+/* dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */
+#define PAR1_TX_DMA_NBR 4
+#define PAR1_RX_DMA_NBR 5
+#define SCSI1_TX_DMA_NBR 4
+#define SCSI1_RX_DMA_NBR 5
+#define SER3_TX_DMA_NBR 4
+#define SER3_RX_DMA_NBR 5
+#define EXTDMA0_TX_DMA_NBR 4
+#define EXTDMA0_RX_DMA_NBR 5
+
+/* dma6 and dma7 shared by ser0, extdma1 and mem2mem */
+#define SER0_TX_DMA_NBR 6
+#define SER0_RX_DMA_NBR 7
+#define EXTDMA1_TX_DMA_NBR 6
+#define EXTDMA1_RX_DMA_NBR 7
+#define MEM2MEM_TX_DMA_NBR 6
+#define MEM2MEM_RX_DMA_NBR 7
+
+/* dma8 and dma9 shared by ser1 and usb */
+#define SER1_TX_DMA_NBR 8
+#define SER1_RX_DMA_NBR 9
+#define USB_TX_DMA_NBR 8
+#define USB_RX_DMA_NBR 9
+
+#endif
diff --git a/include/asm-cris/arch-v10/elf.h b/include/asm-cris/arch-v10/elf.h
new file mode 100644
index 000000000000..2a2201ca538e
--- /dev/null
+++ b/include/asm-cris/arch-v10/elf.h
@@ -0,0 +1,71 @@
+#ifndef __ASMCRIS_ARCH_ELF_H
+#define __ASMCRIS_ARCH_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program
+   starts (a register; assume first param register for CRIS)
+   contains a pointer to a function which might be
+   registered using `atexit'.  This provides a mean for the
+   dynamic linker to call DT_FINI functions for shared libraries
+   that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler.  */
+
+/* Explicitly set registers to 0 to increase determinism.  */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	(_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \
+	(_r)->r9 = 0;  (_r)->r8 = 0;  (_r)->r7 = 0;  (_r)->r6 = 0;  \
+	(_r)->r5 = 0;  (_r)->r4 = 0;  (_r)->r3 = 0;  (_r)->r2 = 0;  \
+	(_r)->r1 = 0;  (_r)->r0 = 0;  (_r)->mof = 0; (_r)->srp = 0; \
+} while (0)
+
+/* The additional layer below is because the stack pointer is missing in 
+   the pt_regs struct, but needed in a core dump. pr_reg is a elf_gregset_t,
+   and should be filled in according to the layout of the user_regs_struct
+   struct; regs is a pt_regs struct. We dump all registers, though several are
+   obviously unnecessary. That way there's less need for intelligence at 
+   the receiving end (i.e. gdb). */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                   \
+	pr_reg[0] = regs->r0;                              \
+	pr_reg[1] = regs->r1;                              \
+	pr_reg[2] = regs->r2;                              \
+	pr_reg[3] = regs->r3;                              \
+	pr_reg[4] = regs->r4;                              \
+	pr_reg[5] = regs->r5;                              \
+	pr_reg[6] = regs->r6;                              \
+	pr_reg[7] = regs->r7;                              \
+	pr_reg[8] = regs->r8;                              \
+	pr_reg[9] = regs->r9;                              \
+	pr_reg[10] = regs->r10;                            \
+	pr_reg[11] = regs->r11;                            \
+	pr_reg[12] = regs->r12;                            \
+	pr_reg[13] = regs->r13;                            \
+	pr_reg[14] = rdusp();               /* sp */       \
+	pr_reg[15] = regs->irp;             /* pc */       \
+	pr_reg[16] = 0;                     /* p0 */       \
+	pr_reg[17] = rdvr();                /* vr */       \
+	pr_reg[18] = 0;                     /* p2 */       \
+	pr_reg[19] = 0;                     /* p3 */       \
+	pr_reg[20] = 0;                     /* p4 */       \
+	pr_reg[21] = (regs->dccr & 0xffff); /* ccr */      \
+	pr_reg[22] = 0;                     /* p6 */       \
+	pr_reg[23] = regs->mof;             /* mof */      \
+	pr_reg[24] = 0;                     /* p8 */       \
+	pr_reg[25] = 0;                     /* ibr */      \
+	pr_reg[26] = 0;                     /* irp */      \
+	pr_reg[27] = regs->srp;             /* srp */      \
+	pr_reg[28] = 0;                     /* bar */      \
+	pr_reg[29] = regs->dccr;            /* dccr */     \
+	pr_reg[30] = 0;                     /* brp */      \
+	pr_reg[31] = rdusp();               /* usp */      \
+	pr_reg[32] = 0;                     /* csrinstr */ \
+	pr_reg[33] = 0;                     /* csraddr */  \
+	pr_reg[34] = 0;                     /* csrdata */
+
+
+#endif
diff --git a/include/asm-cris/arch-v10/io.h b/include/asm-cris/arch-v10/io.h
new file mode 100644
index 000000000000..0bc38a0313c1
--- /dev/null
+++ b/include/asm-cris/arch-v10/io.h
@@ -0,0 +1,193 @@
+#ifndef _ASM_ARCH_CRIS_IO_H
+#define _ASM_ARCH_CRIS_IO_H
+
+#include <asm/arch/svinto.h>
+#include <linux/config.h>
+
+/* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */
+
+extern unsigned long port_g_data_shadow;
+extern unsigned char port_pa_dir_shadow;
+extern unsigned char port_pa_data_shadow;
+extern unsigned char port_pb_i2c_shadow;
+extern unsigned char port_pb_config_shadow;
+extern unsigned char port_pb_dir_shadow;
+extern unsigned char port_pb_data_shadow;
+extern unsigned long r_timer_ctrl_shadow;
+
+extern unsigned long port_cse1_shadow;
+extern unsigned long port_csp0_shadow;
+extern unsigned long port_csp4_shadow;
+
+extern volatile unsigned long *port_cse1_addr;
+extern volatile unsigned long *port_csp0_addr;
+extern volatile unsigned long *port_csp4_addr;
+
+/* macro for setting regs through a shadow - 
+ * r = register name (like R_PORT_PA_DATA)
+ * s = shadow name (like port_pa_data_shadow)
+ * b = bit number
+ * v = value (0 or 1)
+ */
+
+#define REG_SHADOW_SET(r,s,b,v) *r = s = (s & ~(1 << (b))) | ((v) << (b))
+
+/* The LED's on various Etrax-based products are set differently. */
+
+#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM)
+#undef CONFIG_ETRAX_PA_LEDS
+#undef CONFIG_ETRAX_PB_LEDS
+#undef CONFIG_ETRAX_CSP0_LEDS
+#define LED_NETWORK_SET_G(x)
+#define LED_NETWORK_SET_R(x)
+#define LED_ACTIVE_SET_G(x)
+#define LED_ACTIVE_SET_R(x)
+#define LED_DISK_WRITE(x)
+#define LED_DISK_READ(x)
+#endif
+
+#if !defined(CONFIG_ETRAX_CSP0_LEDS)
+#define LED_BIT_SET(x)
+#define LED_BIT_CLR(x)
+#endif
+
+#define LED_OFF    0x00
+#define LED_GREEN  0x01
+#define LED_RED    0x02
+#define LED_ORANGE (LED_GREEN | LED_RED)
+
+#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R 
+#define LED_NETWORK_SET(x)                          \
+	do {                                        \
+		LED_NETWORK_SET_G((x) & LED_GREEN); \
+	} while (0)
+#else
+#define LED_NETWORK_SET(x)                          \
+	do {                                        \
+		LED_NETWORK_SET_G((x) & LED_GREEN); \
+		LED_NETWORK_SET_R((x) & LED_RED);   \
+	} while (0)
+#endif
+#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R 
+#define LED_ACTIVE_SET(x)                           \
+	do {                                        \
+		LED_ACTIVE_SET_G((x) & LED_GREEN);  \
+	} while (0)
+#else
+#define LED_ACTIVE_SET(x)                           \
+	do {                                        \
+		LED_ACTIVE_SET_G((x) & LED_GREEN);  \
+		LED_ACTIVE_SET_R((x) & LED_RED);    \
+	} while (0)
+#endif
+
+#ifdef CONFIG_ETRAX_PA_LEDS
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+         do{\
+                REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x)) 
+#endif
+
+#ifdef CONFIG_ETRAX_PB_LEDS
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+        do{\
+                REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x))     
+#endif
+
+#ifdef CONFIG_ETRAX_CSP0_LEDS
+#define CONFIGURABLE_LEDS\
+        ((1 << CONFIG_ETRAX_LED1G ) | (1 << CONFIG_ETRAX_LED1R ) |\
+         (1 << CONFIG_ETRAX_LED2G ) | (1 << CONFIG_ETRAX_LED2R ) |\
+         (1 << CONFIG_ETRAX_LED3G ) | (1 << CONFIG_ETRAX_LED3R ) |\
+         (1 << CONFIG_ETRAX_LED4G ) | (1 << CONFIG_ETRAX_LED4R ) |\
+         (1 << CONFIG_ETRAX_LED5G ) | (1 << CONFIG_ETRAX_LED5R ) |\
+         (1 << CONFIG_ETRAX_LED6G ) | (1 << CONFIG_ETRAX_LED6R ) |\
+         (1 << CONFIG_ETRAX_LED7G ) | (1 << CONFIG_ETRAX_LED7R ) |\
+         (1 << CONFIG_ETRAX_LED8Y ) | (1 << CONFIG_ETRAX_LED9Y ) |\
+         (1 << CONFIG_ETRAX_LED10Y ) |(1 << CONFIG_ETRAX_LED11Y )|\
+         (1 << CONFIG_ETRAX_LED12R ))
+
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+        do{\
+                REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x))
+#define LED_BIT_SET(x)\
+        do{\
+                if((( 1 << x) & CONFIGURABLE_LEDS)  != 0)\
+                       REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 1);\
+        }while(0)
+#define LED_BIT_CLR(x)\
+        do{\
+                if((( 1 << x) & CONFIGURABLE_LEDS)  != 0)\
+                       REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 0);\
+        }while(0)
+#endif
+
+#
+#ifdef CONFIG_ETRAX_SOFT_SHUTDOWN
+#define SOFT_SHUTDOWN() \
+          REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_SHUTDOWN_BIT, 1)
+#else
+#define SOFT_SHUTDOWN()
+#endif
+
+/* Console I/O for simulated etrax100.  Use #ifdef so erroneous
+   use will be evident. */
+#ifdef CONFIG_SVINTO_SIM
+  /* Let's use the ucsim interface since it lets us do write(2, ...) */
+#define SIMCOUT(s,len)							\
+  asm ("moveq 4,$r9	\n\t"						\
+       "moveq 2,$r10	\n\t"						\
+       "move.d %0,$r11	\n\t"						\
+       "move.d %1,$r12	\n\t"						\
+       "push $irp	\n\t"						\
+       "move 0f,$irp	\n\t"						\
+       "jump -6809	\n"						\
+       "0:		\n\t"						\
+       "pop $irp"							\
+       : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory")
+#define TRACE_ON() __extension__ \
+ ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \
+			       (255)); _Foofoo; })
+
+#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0)
+#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0)
+#define CRIS_CYCLES() __extension__ \
+ ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;})
+#endif /* ! defined CONFIG_SVINTO_SIM */
+
+#endif
diff --git a/include/asm-cris/arch-v10/irq.h b/include/asm-cris/arch-v10/irq.h
new file mode 100644
index 000000000000..a2a6e1533ea0
--- /dev/null
+++ b/include/asm-cris/arch-v10/irq.h
@@ -0,0 +1,181 @@
+/*
+ * Interrupt handling assembler and defines for Linux/CRISv10
+ */
+
+#ifndef _ASM_ARCH_IRQ_H
+#define _ASM_ARCH_IRQ_H
+
+#include <asm/arch/sv_addr_ag.h>
+
+#define NR_IRQS 32
+
+/* The first vector number used for IRQs in v10 is really 0x20 */
+/* but all the code and constants are offseted to make 0 the first */
+#define FIRST_IRQ 0
+
+#define SOME_IRQ_NBR        IO_BITNR(R_VECT_MASK_RD, some)   /* 0 ? */
+#define NMI_IRQ_NBR         IO_BITNR(R_VECT_MASK_RD, nmi)    /* 1 */
+#define TIMER0_IRQ_NBR      IO_BITNR(R_VECT_MASK_RD, timer0) /* 2 */
+#define TIMER1_IRQ_NBR      IO_BITNR(R_VECT_MASK_RD, timer1) /* 3 */
+/* mio, ata, par0, scsi0 on 4 */
+/* par1, scsi1 on 5 */
+#define NETWORK_STATUS_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, network) /* 6 */
+
+#define SERIAL_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, serial) /* 8 */
+#define PA_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, pa) /* 11 */
+/* extdma0 and extdma1 is at irq 12 and 13 and/or same as dma5 and dma6 ? */
+#define EXTDMA0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma0)
+#define EXTDMA1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma1)
+
+/* dma0-9 is irq 16..25 */
+/* 16,17: network */
+#define DMA0_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma0)
+#define DMA1_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma1)
+#define NETWORK_DMA_TX_IRQ_NBR DMA0_TX_IRQ_NBR
+#define NETWORK_DMA_RX_IRQ_NBR DMA1_RX_IRQ_NBR
+
+/* 18,19: dma2 and dma3 shared by par0, scsi0, ser2 and ata */
+#define DMA2_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma2)
+#define DMA3_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma3)
+#define SER2_DMA_TX_IRQ_NBR DMA2_TX_IRQ_NBR
+#define SER2_DMA_RX_IRQ_NBR DMA3_RX_IRQ_NBR
+
+/* 20,21: dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */
+#define DMA4_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma4)
+#define DMA5_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma5)
+#define SER3_DMA_TX_IRQ_NBR DMA4_TX_IRQ_NBR
+#define SER3_DMA_RX_IRQ_NBR DMA5_RX_IRQ_NBR
+
+/* 22,23: dma6 and dma7 shared by ser0, extdma1 and mem2mem */
+#define DMA6_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma6)
+#define DMA7_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma7)
+#define SER0_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR
+#define SER0_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR
+#define MEM2MEM_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR
+#define MEM2MEM_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR
+
+/* 24,25: dma8 and dma9 shared by ser1 and usb */
+#define DMA8_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma8)
+#define DMA9_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma9)
+#define SER1_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR
+#define SER1_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR
+#define USB_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR
+#define USB_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR
+
+/* usb: controller at irq 31 + uses DMA8 and DMA9 */
+#define USB_HC_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, usb)
+
+/* our fine, global, etrax irq vector! the pointer lives in the head.S file. */
+
+typedef void (*irqvectptr)(void);
+
+struct etrax_interrupt_vector {
+	irqvectptr v[256];
+};
+
+extern struct etrax_interrupt_vector *etrax_irv;
+void set_int_vector(int n, irqvectptr addr, irqvectptr saddr);
+void set_break_vector(int n, irqvectptr addr);
+
+#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+
+#define __STR(x) #x
+#define STR(x) __STR(x)
+ 
+/* SAVE_ALL saves registers so they match pt_regs */
+
+#define SAVE_ALL \
+  "move $irp,[$sp=$sp-16]\n\t" /* push instruction pointer and fake SBFS struct */ \
+  "push $srp\n\t"       /* push subroutine return pointer */ \
+  "push $dccr\n\t"      /* push condition codes */ \
+  "push $mof\n\t"       /* push multiply overflow reg */ \
+  "di\n\t"             /* need to disable irq's at this point */\
+  "subq 14*4,$sp\n\t"   /* make room for r0-r13 */ \
+  "movem $r13,[$sp]\n\t" /* push the r0-r13 registers */ \
+  "push $r10\n\t"       /* push orig_r10 */ \
+  "clear.d [$sp=$sp-4]\n\t"  /* frametype - this is a normal stackframe */
+
+  /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
+
+#define BLOCK_IRQ(mask,nr) \
+  "move.d " #mask ",$r0\n\t" \
+  "move.d $r0,[0xb00000d8]\n\t" 
+  
+#define UNBLOCK_IRQ(mask) \
+  "move.d " #mask ",$r0\n\t" \
+  "move.d $r0,[0xb00000dc]\n\t" 
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+#define sIRQ_NAME(nr) IRQ_NAME2(sIRQ##nr)
+#define BAD_IRQ_NAME(nr) IRQ_NAME2(bad_IRQ##nr)
+
+  /* the asm IRQ handler makes sure the causing IRQ is blocked, then it calls
+   * do_IRQ (with irq disabled still). after that it unblocks and jumps to
+   * ret_from_intr (entry.S)
+   *
+   * The reason the IRQ is blocked is to allow an sti() before the handler which
+   * will acknowledge the interrupt is run.
+   */
+
+#define BUILD_IRQ(nr,mask) \
+void IRQ_NAME(nr); \
+void sIRQ_NAME(nr); \
+void BAD_IRQ_NAME(nr); \
+__asm__ ( \
+          ".text\n\t" \
+          "IRQ" #nr "_interrupt:\n\t" \
+	  SAVE_ALL \
+	  "sIRQ" #nr "_interrupt:\n\t" /* shortcut for the multiple irq handler */ \
+	  BLOCK_IRQ(mask,nr) /* this must be done to prevent irq loops when we ei later */ \
+	  "moveq "#nr",$r10\n\t" \
+	  "move.d $sp,$r11\n\t" \
+	  "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \
+	  UNBLOCK_IRQ(mask) \
+	  "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \
+	  "jump ret_from_intr\n\t" \
+          "bad_IRQ" #nr "_interrupt:\n\t" \
+	  "push $r0\n\t" \
+	  BLOCK_IRQ(mask,nr) \
+	  "pop $r0\n\t" \
+          "reti\n\t" \
+          "nop\n");
+
+/* This is subtle. The timer interrupt is crucial and it should not be disabled for 
+ * too long. However, if it had been a normal interrupt as per BUILD_IRQ, it would
+ * have been BLOCK'ed, and then softirq's are run before we return here to UNBLOCK.
+ * If the softirq's take too much time to run, the timer irq won't run and the 
+ * watchdog will kill us.
+ *
+ * Furthermore, if a lot of other irq's occur before we return here, the multiple_irq
+ * handler is run and it prioritizes the timer interrupt. However if we had BLOCK'ed
+ * it here, we would not get the multiple_irq at all.
+ *
+ * The non-blocking here is based on the knowledge that the timer interrupt is 
+ * registred as a fast interrupt (SA_INTERRUPT) so that we _know_ there will not
+ * be an sti() before the timer irq handler is run to acknowledge the interrupt.
+ */
+
+#define BUILD_TIMER_IRQ(nr,mask) \
+void IRQ_NAME(nr); \
+void sIRQ_NAME(nr); \
+void BAD_IRQ_NAME(nr); \
+__asm__ ( \
+          ".text\n\t" \
+          "IRQ" #nr "_interrupt:\n\t" \
+	  SAVE_ALL \
+	  "sIRQ" #nr "_interrupt:\n\t" /* shortcut for the multiple irq handler */ \
+	  "moveq "#nr",$r10\n\t" \
+	  "move.d $sp,$r11\n\t" \
+	  "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \
+	  "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \
+	  "jump ret_from_intr\n\t" \
+          "bad_IRQ" #nr "_interrupt:\n\t" \
+	  "push $r0\n\t" \
+	  BLOCK_IRQ(mask,nr) \
+	  "pop $r0\n\t" \
+          "reti\n\t" \
+          "nop\n");
+
+#endif
diff --git a/include/asm-cris/arch-v10/mmu.h b/include/asm-cris/arch-v10/mmu.h
new file mode 100644
index 000000000000..d18aa00e50bc
--- /dev/null
+++ b/include/asm-cris/arch-v10/mmu.h
@@ -0,0 +1,106 @@
+/*
+ * CRIS MMU constants and PTE layout
+ */
+
+#ifndef _CRIS_ARCH_MMU_H
+#define _CRIS_ARCH_MMU_H
+
+/* type used in struct mm to couple an MMU context to an active mm */
+
+typedef unsigned int mm_context_t;
+
+/* kernel memory segments */
+
+#define KSEG_F 0xf0000000UL
+#define KSEG_E 0xe0000000UL
+#define KSEG_D 0xd0000000UL
+#define KSEG_C 0xc0000000UL
+#define KSEG_B 0xb0000000UL
+#define KSEG_A 0xa0000000UL
+#define KSEG_9 0x90000000UL
+#define KSEG_8 0x80000000UL
+#define KSEG_7 0x70000000UL
+#define KSEG_6 0x60000000UL
+#define KSEG_5 0x50000000UL
+#define KSEG_4 0x40000000UL
+#define KSEG_3 0x30000000UL
+#define KSEG_2 0x20000000UL
+#define KSEG_1 0x10000000UL
+#define KSEG_0 0x00000000UL
+
+/* CRIS PTE bits (see R_TLB_LO in the register description)
+ *
+ *   Bit:  31-13 12-------4    3        2       1       0  
+ *         ________________________________________________
+ *        | pfn | reserved | global | valid | kernel | we  |
+ *        |_____|__________|________|_______|________|_____|
+ *
+ * (pfn = physical frame number)
+ */
+
+/* Real HW-based PTE bits. We use some synonym names so that
+ * things become less confusing in combination with the SW-based
+ * bits further below.
+ *
+ */
+
+#define _PAGE_WE	   (1<<0) /* page is write-enabled */
+#define _PAGE_SILENT_WRITE (1<<0) /* synonym */
+#define _PAGE_KERNEL	   (1<<1) /* page is kernel only */
+#define _PAGE_VALID	   (1<<2) /* page is valid */
+#define _PAGE_SILENT_READ  (1<<2) /* synonym */
+#define _PAGE_GLOBAL       (1<<3) /* global page - context is ignored */
+
+/* Bits the HW doesn't care about but the kernel uses them in SW */
+
+#define _PAGE_PRESENT   (1<<4)  /* page present in memory */
+#define _PAGE_FILE      (1<<5)  /* set: pagecache, unset: swap (when !PRESENT) */
+#define _PAGE_ACCESSED	(1<<5)  /* simulated in software using valid bit */
+#define _PAGE_MODIFIED	(1<<6)  /* simulated in software using we bit */
+#define _PAGE_READ      (1<<7)  /* read-enabled */
+#define _PAGE_WRITE     (1<<8)  /* write-enabled */
+
+/* Define some higher level generic page attributes. */
+
+#define __READABLE      (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE     (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+
+#define _PAGE_TABLE     (_PAGE_PRESENT | __READABLE | __WRITEABLE)
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
+
+#define PAGE_NONE       __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | __READABLE | _PAGE_WRITE | \
+				 _PAGE_ACCESSED)
+#define PAGE_COPY       __pgprot(_PAGE_PRESENT | __READABLE)  // | _PAGE_COW
+#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | __READABLE)
+#define PAGE_KERNEL     __pgprot(_PAGE_GLOBAL | _PAGE_KERNEL | \
+				 _PAGE_PRESENT | __READABLE | __WRITEABLE)
+#define _KERNPG_TABLE   (_PAGE_TABLE | _PAGE_KERNEL)
+
+/*
+ * CRIS can't do page protection for execute, and considers read the same.
+ * Also, write permissions imply read permissions. This is the closest we can
+ * get..
+ */
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+#define PTE_FILE_MAX_BITS	26
+
+#endif
diff --git a/include/asm-cris/arch-v10/offset.h b/include/asm-cris/arch-v10/offset.h
new file mode 100644
index 000000000000..fcbd77eab281
--- /dev/null
+++ b/include/asm-cris/arch-v10/offset.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by arch/cris/Makefile
+ *
+ */
+
+#define PT_orig_r10 4 /* offsetof(struct pt_regs, orig_r10) */
+#define PT_r13 8 /* offsetof(struct pt_regs, r13) */
+#define PT_r12 12 /* offsetof(struct pt_regs, r12) */
+#define PT_r11 16 /* offsetof(struct pt_regs, r11) */
+#define PT_r10 20 /* offsetof(struct pt_regs, r10) */
+#define PT_r9 24 /* offsetof(struct pt_regs, r9) */
+#define PT_mof 64 /* offsetof(struct pt_regs, mof) */
+#define PT_dccr 68 /* offsetof(struct pt_regs, dccr) */
+#define PT_srp 72 /* offsetof(struct pt_regs, srp) */
+
+#define TI_task 0 /* offsetof(struct thread_info, task) */
+#define TI_flags 8 /* offsetof(struct thread_info, flags) */
+#define TI_preempt_count 16 /* offsetof(struct thread_info, preempt_count) */
+
+#define THREAD_ksp 0 /* offsetof(struct thread_struct, ksp) */
+#define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */
+#define THREAD_dccr 8 /* offsetof(struct thread_struct, dccr) */
+
+#define TASK_pid 133 /* offsetof(struct task_struct, pid) */
+
+#define LCLONE_VM 256 /* CLONE_VM */
+#define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */
+
+#endif
diff --git a/include/asm-cris/arch-v10/page.h b/include/asm-cris/arch-v10/page.h
new file mode 100644
index 000000000000..407e6e68f49e
--- /dev/null
+++ b/include/asm-cris/arch-v10/page.h
@@ -0,0 +1,31 @@
+#ifndef _CRIS_ARCH_PAGE_H
+#define _CRIS_ARCH_PAGE_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+
+/* This handles the memory map.. */
+#ifdef CONFIG_CRIS_LOW_MAP
+#define PAGE_OFFSET		KSEG_6   /* kseg_6 is mapped to physical ram */
+#else
+#define PAGE_OFFSET		KSEG_C   /* kseg_c is mapped to physical ram */
+#endif
+
+/* macros to convert between really physical and virtual addresses
+ * by stripping a selected bit, we can convert between KSEG_x and 0x40000000 where
+ * the DRAM really resides
+ */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+/* we have DRAM virtually at 0x6 */
+#define __pa(x)                 ((unsigned long)(x) & 0xdfffffff)
+#define __va(x)                 ((void *)((unsigned long)(x) | 0x20000000))
+#else
+/* we have DRAM virtually at 0xc */
+#define __pa(x)                 ((unsigned long)(x) & 0x7fffffff)
+#define __va(x)                 ((void *)((unsigned long)(x) | 0x80000000))
+#endif
+
+#endif
+#endif
diff --git a/include/asm-cris/arch-v10/pgtable.h b/include/asm-cris/arch-v10/pgtable.h
new file mode 100644
index 000000000000..2a2576d1fc97
--- /dev/null
+++ b/include/asm-cris/arch-v10/pgtable.h
@@ -0,0 +1,17 @@
+#ifndef _CRIS_ARCH_PGTABLE_H
+#define _CRIS_ARCH_PGTABLE_H
+
+/*
+ * Kernels own virtual memory area. 
+ */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+#define VMALLOC_START     KSEG_7
+#define VMALLOC_END       KSEG_8
+#else
+#define VMALLOC_START     KSEG_D
+#define VMALLOC_END       KSEG_E
+#endif
+
+#endif
+
diff --git a/include/asm-cris/arch-v10/processor.h b/include/asm-cris/arch-v10/processor.h
new file mode 100644
index 000000000000..9355d8675a58
--- /dev/null
+++ b/include/asm-cris/arch-v10/processor.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_CRIS_ARCH_PROCESSOR_H
+#define __ASM_CRIS_ARCH_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({void *pc; __asm__ ("move.d $pc,%0" : "=rm" (pc)); pc; })
+
+/* CRIS has no problems with write protection */
+#define wp_works_ok 1
+
+/* CRIS thread_struct. this really has nothing to do with the processor itself, since
+ * CRIS does not do any hardware task-switching, but it's here for legacy reasons.
+ * The thread_struct here is used when task-switching using _resume defined in entry.S.
+ * The offsets here are hardcoded into _resume - if you change this struct, you need to
+ * change them as well!!!
+*/
+
+struct thread_struct {
+	unsigned long ksp;     /* kernel stack pointer */
+	unsigned long usp;     /* user stack pointer */
+	unsigned long dccr;    /* saved flag register */
+};
+
+/*
+ * User space process size. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+#define TASK_SIZE       (0x50000000UL)   /* 1.25 GB */
+#else
+#define TASK_SIZE       (0xA0000000UL)   /* 2.56 GB */
+#endif
+
+#define INIT_THREAD  { \
+   0, 0, 0x20 }  /* ccr = int enable, nothing else */
+
+#define KSTK_EIP(tsk)	\
+({			\
+	unsigned long eip = 0;   \
+	unsigned long regs = (unsigned long)user_regs(tsk); \
+	if (regs > PAGE_SIZE && \
+		virt_addr_valid(regs)) \
+	eip = ((struct pt_regs *)regs)->irp; \
+	eip; \
+})
+
+/* give the thread a program location
+ * set user-mode (The 'U' flag (User mode flag) is CCR/DCCR bit 8) 
+ * switch user-stackpointer
+ */
+
+#define start_thread(regs, ip, usp) do { \
+	set_fs(USER_DS);      \
+	regs->irp = ip;       \
+	regs->dccr |= 1 << U_DCCR_BITNR; \
+	wrusp(usp);           \
+} while(0)
+
+#endif
diff --git a/include/asm-cris/arch-v10/ptrace.h b/include/asm-cris/arch-v10/ptrace.h
new file mode 100644
index 000000000000..fb14c5ee37f9
--- /dev/null
+++ b/include/asm-cris/arch-v10/ptrace.h
@@ -0,0 +1,115 @@
+#ifndef _CRIS_ARCH_PTRACE_H
+#define _CRIS_ARCH_PTRACE_H
+
+/* Frame types */
+
+#define CRIS_FRAME_NORMAL   0 /* normal frame without SBFS stacking */
+#define CRIS_FRAME_BUSFAULT 1 /* frame stacked using SBFS, need RBF return
+				 path */
+
+/* Register numbers in the ptrace system call interface */
+
+#define PT_FRAMETYPE 0
+#define PT_ORIG_R10  1
+#define PT_R13       2
+#define PT_R12       3
+#define PT_R11       4
+#define PT_R10       5
+#define PT_R9        6
+#define PT_R8        7
+#define PT_R7        8
+#define PT_R6        9
+#define PT_R5        10
+#define PT_R4        11
+#define PT_R3        12
+#define PT_R2        13
+#define PT_R1        14
+#define PT_R0        15
+#define PT_MOF       16
+#define PT_DCCR      17
+#define PT_SRP       18
+#define PT_IRP       19    /* This is actually the debugged process' PC */
+#define PT_CSRINSTR  20    /* CPU Status record remnants -
+			      valid if frametype == busfault */
+#define PT_CSRADDR   21
+#define PT_CSRDATA   22
+#define PT_USP       23    /* special case - USP is not in the pt_regs */
+#define PT_MAX       23
+
+/* Condition code bit numbers.  The same numbers apply to CCR of course,
+   but we use DCCR everywhere else, so let's try and be consistent.  */
+#define C_DCCR_BITNR 0
+#define V_DCCR_BITNR 1
+#define Z_DCCR_BITNR 2
+#define N_DCCR_BITNR 3
+#define X_DCCR_BITNR 4
+#define I_DCCR_BITNR 5
+#define B_DCCR_BITNR 6
+#define M_DCCR_BITNR 7
+#define U_DCCR_BITNR 8
+#define P_DCCR_BITNR 9
+#define F_DCCR_BITNR 10
+
+/* pt_regs not only specifices the format in the user-struct during
+ * ptrace but is also the frame format used in the kernel prologue/epilogues 
+ * themselves
+ */
+
+struct pt_regs {
+	unsigned long frametype;  /* type of stackframe */
+	unsigned long orig_r10;
+	/* pushed by movem r13, [sp] in SAVE_ALL, movem pushes backwards */
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+	unsigned long mof;
+	unsigned long dccr;
+	unsigned long srp;
+	unsigned long irp; /* This is actually the debugged process' PC */
+	unsigned long csrinstr;
+	unsigned long csraddr;
+	unsigned long csrdata;
+};
+
+/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S)
+ * when doing a context-switch. it is used (apart from in resume) when a new
+ * thread is made and we need to make _resume (which is starting it for the
+ * first time) realise what is going on.
+ *
+ * Actually, the use is very close to the thread struct (TSS) in that both the
+ * switch_stack and the TSS are used to keep thread stuff when switching in
+ * _resume.
+ */
+
+struct switch_stack {
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+	unsigned long return_ip; /* ip that _resume will return to */
+};
+
+/* bit 8 is user-mode flag */
+#define user_mode(regs) (((regs)->dccr & 0x100) != 0)
+#define instruction_pointer(regs) ((regs)->irp)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#endif
diff --git a/include/asm-cris/arch-v10/sv_addr.agh b/include/asm-cris/arch-v10/sv_addr.agh
new file mode 100644
index 000000000000..6ac3a7bc9760
--- /dev/null
+++ b/include/asm-cris/arch-v10/sv_addr.agh
@@ -0,0 +1,7306 @@
+/*
+!* This file was automatically generated by /n/asic/bin/reg_macro_gen
+!* from the file `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd'.
+!* Editing within this file is thus not recommended,
+!* make the changes in `/n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd' instead.
+!*/
+
+
+/*
+!* Bus interface configuration registers
+!*/
+
+#define R_WAITSTATES (IO_TYPECAST_UDWORD 0xb0000000)
+#define R_WAITSTATES__pcs4_7_zw__BITNR 30
+#define R_WAITSTATES__pcs4_7_zw__WIDTH 2
+#define R_WAITSTATES__pcs4_7_ew__BITNR 28
+#define R_WAITSTATES__pcs4_7_ew__WIDTH 2
+#define R_WAITSTATES__pcs4_7_lw__BITNR 24
+#define R_WAITSTATES__pcs4_7_lw__WIDTH 4
+#define R_WAITSTATES__pcs0_3_zw__BITNR 22
+#define R_WAITSTATES__pcs0_3_zw__WIDTH 2
+#define R_WAITSTATES__pcs0_3_ew__BITNR 20
+#define R_WAITSTATES__pcs0_3_ew__WIDTH 2
+#define R_WAITSTATES__pcs0_3_lw__BITNR 16
+#define R_WAITSTATES__pcs0_3_lw__WIDTH 4
+#define R_WAITSTATES__sram_zw__BITNR 14
+#define R_WAITSTATES__sram_zw__WIDTH 2
+#define R_WAITSTATES__sram_ew__BITNR 12
+#define R_WAITSTATES__sram_ew__WIDTH 2
+#define R_WAITSTATES__sram_lw__BITNR 8
+#define R_WAITSTATES__sram_lw__WIDTH 4
+#define R_WAITSTATES__flash_zw__BITNR 6
+#define R_WAITSTATES__flash_zw__WIDTH 2
+#define R_WAITSTATES__flash_ew__BITNR 4
+#define R_WAITSTATES__flash_ew__WIDTH 2
+#define R_WAITSTATES__flash_lw__BITNR 0
+#define R_WAITSTATES__flash_lw__WIDTH 4
+
+#define R_BUS_CONFIG (IO_TYPECAST_UDWORD 0xb0000004)
+#define R_BUS_CONFIG__sram_type__BITNR 9
+#define R_BUS_CONFIG__sram_type__WIDTH 1
+#define R_BUS_CONFIG__sram_type__cwe 1
+#define R_BUS_CONFIG__sram_type__bwe 0
+#define R_BUS_CONFIG__dma_burst__BITNR 8
+#define R_BUS_CONFIG__dma_burst__WIDTH 1
+#define R_BUS_CONFIG__dma_burst__burst16 1
+#define R_BUS_CONFIG__dma_burst__burst32 0
+#define R_BUS_CONFIG__pcs4_7_wr__BITNR 7
+#define R_BUS_CONFIG__pcs4_7_wr__WIDTH 1
+#define R_BUS_CONFIG__pcs4_7_wr__ext 1
+#define R_BUS_CONFIG__pcs4_7_wr__norm 0
+#define R_BUS_CONFIG__pcs0_3_wr__BITNR 6
+#define R_BUS_CONFIG__pcs0_3_wr__WIDTH 1
+#define R_BUS_CONFIG__pcs0_3_wr__ext 1
+#define R_BUS_CONFIG__pcs0_3_wr__norm 0
+#define R_BUS_CONFIG__sram_wr__BITNR 5
+#define R_BUS_CONFIG__sram_wr__WIDTH 1
+#define R_BUS_CONFIG__sram_wr__ext 1
+#define R_BUS_CONFIG__sram_wr__norm 0
+#define R_BUS_CONFIG__flash_wr__BITNR 4
+#define R_BUS_CONFIG__flash_wr__WIDTH 1
+#define R_BUS_CONFIG__flash_wr__ext 1
+#define R_BUS_CONFIG__flash_wr__norm 0
+#define R_BUS_CONFIG__pcs4_7_bw__BITNR 3
+#define R_BUS_CONFIG__pcs4_7_bw__WIDTH 1
+#define R_BUS_CONFIG__pcs4_7_bw__bw32 1
+#define R_BUS_CONFIG__pcs4_7_bw__bw16 0
+#define R_BUS_CONFIG__pcs0_3_bw__BITNR 2
+#define R_BUS_CONFIG__pcs0_3_bw__WIDTH 1
+#define R_BUS_CONFIG__pcs0_3_bw__bw32 1
+#define R_BUS_CONFIG__pcs0_3_bw__bw16 0
+#define R_BUS_CONFIG__sram_bw__BITNR 1
+#define R_BUS_CONFIG__sram_bw__WIDTH 1
+#define R_BUS_CONFIG__sram_bw__bw32 1
+#define R_BUS_CONFIG__sram_bw__bw16 0
+#define R_BUS_CONFIG__flash_bw__BITNR 0
+#define R_BUS_CONFIG__flash_bw__WIDTH 1
+#define R_BUS_CONFIG__flash_bw__bw32 1
+#define R_BUS_CONFIG__flash_bw__bw16 0
+
+#define R_BUS_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000004)
+#define R_BUS_STATUS__pll_lock_tm__BITNR 5
+#define R_BUS_STATUS__pll_lock_tm__WIDTH 1
+#define R_BUS_STATUS__pll_lock_tm__expired 0
+#define R_BUS_STATUS__pll_lock_tm__counting 1
+#define R_BUS_STATUS__both_faults__BITNR 4
+#define R_BUS_STATUS__both_faults__WIDTH 1
+#define R_BUS_STATUS__both_faults__no 0
+#define R_BUS_STATUS__both_faults__yes 1
+#define R_BUS_STATUS__bsen___BITNR 3
+#define R_BUS_STATUS__bsen___WIDTH 1
+#define R_BUS_STATUS__bsen___enable 0
+#define R_BUS_STATUS__bsen___disable 1
+#define R_BUS_STATUS__boot__BITNR 1
+#define R_BUS_STATUS__boot__WIDTH 2
+#define R_BUS_STATUS__boot__uncached 0
+#define R_BUS_STATUS__boot__serial 1
+#define R_BUS_STATUS__boot__network 2
+#define R_BUS_STATUS__boot__parallel 3
+#define R_BUS_STATUS__flashw__BITNR 0
+#define R_BUS_STATUS__flashw__WIDTH 1
+#define R_BUS_STATUS__flashw__bw32 1
+#define R_BUS_STATUS__flashw__bw16 0
+
+#define R_DRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008)
+#define R_DRAM_TIMING__sdram__BITNR 31
+#define R_DRAM_TIMING__sdram__WIDTH 1
+#define R_DRAM_TIMING__sdram__enable 1
+#define R_DRAM_TIMING__sdram__disable 0
+#define R_DRAM_TIMING__ref__BITNR 14
+#define R_DRAM_TIMING__ref__WIDTH 2
+#define R_DRAM_TIMING__ref__e52us 0
+#define R_DRAM_TIMING__ref__e13us 1
+#define R_DRAM_TIMING__ref__e8700ns 2
+#define R_DRAM_TIMING__ref__disable 3
+#define R_DRAM_TIMING__rp__BITNR 12
+#define R_DRAM_TIMING__rp__WIDTH 2
+#define R_DRAM_TIMING__rs__BITNR 10
+#define R_DRAM_TIMING__rs__WIDTH 2
+#define R_DRAM_TIMING__rh__BITNR 8
+#define R_DRAM_TIMING__rh__WIDTH 2
+#define R_DRAM_TIMING__w__BITNR 7
+#define R_DRAM_TIMING__w__WIDTH 1
+#define R_DRAM_TIMING__w__norm 0
+#define R_DRAM_TIMING__w__ext 1
+#define R_DRAM_TIMING__c__BITNR 6
+#define R_DRAM_TIMING__c__WIDTH 1
+#define R_DRAM_TIMING__c__norm 0
+#define R_DRAM_TIMING__c__ext 1
+#define R_DRAM_TIMING__cz__BITNR 4
+#define R_DRAM_TIMING__cz__WIDTH 2
+#define R_DRAM_TIMING__cp__BITNR 2
+#define R_DRAM_TIMING__cp__WIDTH 2
+#define R_DRAM_TIMING__cw__BITNR 0
+#define R_DRAM_TIMING__cw__WIDTH 2
+
+#define R_SDRAM_TIMING (IO_TYPECAST_UDWORD 0xb0000008)
+#define R_SDRAM_TIMING__sdram__BITNR 31
+#define R_SDRAM_TIMING__sdram__WIDTH 1
+#define R_SDRAM_TIMING__sdram__enable 1
+#define R_SDRAM_TIMING__sdram__disable 0
+#define R_SDRAM_TIMING__mrs_data__BITNR 16
+#define R_SDRAM_TIMING__mrs_data__WIDTH 15
+#define R_SDRAM_TIMING__ref__BITNR 14
+#define R_SDRAM_TIMING__ref__WIDTH 2
+#define R_SDRAM_TIMING__ref__e52us 0
+#define R_SDRAM_TIMING__ref__e13us 1
+#define R_SDRAM_TIMING__ref__e6500ns 2
+#define R_SDRAM_TIMING__ref__disable 3
+#define R_SDRAM_TIMING__ddr__BITNR 13
+#define R_SDRAM_TIMING__ddr__WIDTH 1
+#define R_SDRAM_TIMING__ddr__on 1
+#define R_SDRAM_TIMING__ddr__off 0
+#define R_SDRAM_TIMING__clk100__BITNR 12
+#define R_SDRAM_TIMING__clk100__WIDTH 1
+#define R_SDRAM_TIMING__clk100__on 1
+#define R_SDRAM_TIMING__clk100__off 0
+#define R_SDRAM_TIMING__ps__BITNR 11
+#define R_SDRAM_TIMING__ps__WIDTH 1
+#define R_SDRAM_TIMING__ps__on 1
+#define R_SDRAM_TIMING__ps__off 0
+#define R_SDRAM_TIMING__cmd__BITNR 9
+#define R_SDRAM_TIMING__cmd__WIDTH 2
+#define R_SDRAM_TIMING__cmd__pre 3
+#define R_SDRAM_TIMING__cmd__ref 2
+#define R_SDRAM_TIMING__cmd__mrs 1
+#define R_SDRAM_TIMING__cmd__nop 0
+#define R_SDRAM_TIMING__pde__BITNR 8
+#define R_SDRAM_TIMING__pde__WIDTH 1
+#define R_SDRAM_TIMING__rc__BITNR 6
+#define R_SDRAM_TIMING__rc__WIDTH 2
+#define R_SDRAM_TIMING__rp__BITNR 4
+#define R_SDRAM_TIMING__rp__WIDTH 2
+#define R_SDRAM_TIMING__rcd__BITNR 2
+#define R_SDRAM_TIMING__rcd__WIDTH 2
+#define R_SDRAM_TIMING__cl__BITNR 0
+#define R_SDRAM_TIMING__cl__WIDTH 2
+
+#define R_DRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c)
+#define R_DRAM_CONFIG__wmm1__BITNR 31
+#define R_DRAM_CONFIG__wmm1__WIDTH 1
+#define R_DRAM_CONFIG__wmm1__wmm 1
+#define R_DRAM_CONFIG__wmm1__norm 0
+#define R_DRAM_CONFIG__wmm0__BITNR 30
+#define R_DRAM_CONFIG__wmm0__WIDTH 1
+#define R_DRAM_CONFIG__wmm0__wmm 1
+#define R_DRAM_CONFIG__wmm0__norm 0
+#define R_DRAM_CONFIG__sh1__BITNR 27
+#define R_DRAM_CONFIG__sh1__WIDTH 3
+#define R_DRAM_CONFIG__sh0__BITNR 24
+#define R_DRAM_CONFIG__sh0__WIDTH 3
+#define R_DRAM_CONFIG__w__BITNR 23
+#define R_DRAM_CONFIG__w__WIDTH 1
+#define R_DRAM_CONFIG__w__bw16 0
+#define R_DRAM_CONFIG__w__bw32 1
+#define R_DRAM_CONFIG__c__BITNR 22
+#define R_DRAM_CONFIG__c__WIDTH 1
+#define R_DRAM_CONFIG__c__byte 0
+#define R_DRAM_CONFIG__c__bank 1
+#define R_DRAM_CONFIG__e__BITNR 21
+#define R_DRAM_CONFIG__e__WIDTH 1
+#define R_DRAM_CONFIG__e__fast 0
+#define R_DRAM_CONFIG__e__edo 1
+#define R_DRAM_CONFIG__group_sel__BITNR 16
+#define R_DRAM_CONFIG__group_sel__WIDTH 5
+#define R_DRAM_CONFIG__group_sel__grp0 0
+#define R_DRAM_CONFIG__group_sel__grp1 1
+#define R_DRAM_CONFIG__group_sel__bit9 9
+#define R_DRAM_CONFIG__group_sel__bit10 10
+#define R_DRAM_CONFIG__group_sel__bit11 11
+#define R_DRAM_CONFIG__group_sel__bit12 12
+#define R_DRAM_CONFIG__group_sel__bit13 13
+#define R_DRAM_CONFIG__group_sel__bit14 14
+#define R_DRAM_CONFIG__group_sel__bit15 15
+#define R_DRAM_CONFIG__group_sel__bit16 16
+#define R_DRAM_CONFIG__group_sel__bit17 17
+#define R_DRAM_CONFIG__group_sel__bit18 18
+#define R_DRAM_CONFIG__group_sel__bit19 19
+#define R_DRAM_CONFIG__group_sel__bit20 20
+#define R_DRAM_CONFIG__group_sel__bit21 21
+#define R_DRAM_CONFIG__group_sel__bit22 22
+#define R_DRAM_CONFIG__group_sel__bit23 23
+#define R_DRAM_CONFIG__group_sel__bit24 24
+#define R_DRAM_CONFIG__group_sel__bit25 25
+#define R_DRAM_CONFIG__group_sel__bit26 26
+#define R_DRAM_CONFIG__group_sel__bit27 27
+#define R_DRAM_CONFIG__group_sel__bit28 28
+#define R_DRAM_CONFIG__group_sel__bit29 29
+#define R_DRAM_CONFIG__ca1__BITNR 13
+#define R_DRAM_CONFIG__ca1__WIDTH 3
+#define R_DRAM_CONFIG__bank23sel__BITNR 8
+#define R_DRAM_CONFIG__bank23sel__WIDTH 5
+#define R_DRAM_CONFIG__bank23sel__bank0 0
+#define R_DRAM_CONFIG__bank23sel__bank1 1
+#define R_DRAM_CONFIG__bank23sel__bit9 9
+#define R_DRAM_CONFIG__bank23sel__bit10 10
+#define R_DRAM_CONFIG__bank23sel__bit11 11
+#define R_DRAM_CONFIG__bank23sel__bit12 12
+#define R_DRAM_CONFIG__bank23sel__bit13 13
+#define R_DRAM_CONFIG__bank23sel__bit14 14
+#define R_DRAM_CONFIG__bank23sel__bit15 15
+#define R_DRAM_CONFIG__bank23sel__bit16 16
+#define R_DRAM_CONFIG__bank23sel__bit17 17
+#define R_DRAM_CONFIG__bank23sel__bit18 18
+#define R_DRAM_CONFIG__bank23sel__bit19 19
+#define R_DRAM_CONFIG__bank23sel__bit20 20
+#define R_DRAM_CONFIG__bank23sel__bit21 21
+#define R_DRAM_CONFIG__bank23sel__bit22 22
+#define R_DRAM_CONFIG__bank23sel__bit23 23
+#define R_DRAM_CONFIG__bank23sel__bit24 24
+#define R_DRAM_CONFIG__bank23sel__bit25 25
+#define R_DRAM_CONFIG__bank23sel__bit26 26
+#define R_DRAM_CONFIG__bank23sel__bit27 27
+#define R_DRAM_CONFIG__bank23sel__bit28 28
+#define R_DRAM_CONFIG__bank23sel__bit29 29
+#define R_DRAM_CONFIG__ca0__BITNR 5
+#define R_DRAM_CONFIG__ca0__WIDTH 3
+#define R_DRAM_CONFIG__bank01sel__BITNR 0
+#define R_DRAM_CONFIG__bank01sel__WIDTH 5
+#define R_DRAM_CONFIG__bank01sel__bank0 0
+#define R_DRAM_CONFIG__bank01sel__bank1 1
+#define R_DRAM_CONFIG__bank01sel__bit9 9
+#define R_DRAM_CONFIG__bank01sel__bit10 10
+#define R_DRAM_CONFIG__bank01sel__bit11 11
+#define R_DRAM_CONFIG__bank01sel__bit12 12
+#define R_DRAM_CONFIG__bank01sel__bit13 13
+#define R_DRAM_CONFIG__bank01sel__bit14 14
+#define R_DRAM_CONFIG__bank01sel__bit15 15
+#define R_DRAM_CONFIG__bank01sel__bit16 16
+#define R_DRAM_CONFIG__bank01sel__bit17 17
+#define R_DRAM_CONFIG__bank01sel__bit18 18
+#define R_DRAM_CONFIG__bank01sel__bit19 19
+#define R_DRAM_CONFIG__bank01sel__bit20 20
+#define R_DRAM_CONFIG__bank01sel__bit21 21
+#define R_DRAM_CONFIG__bank01sel__bit22 22
+#define R_DRAM_CONFIG__bank01sel__bit23 23
+#define R_DRAM_CONFIG__bank01sel__bit24 24
+#define R_DRAM_CONFIG__bank01sel__bit25 25
+#define R_DRAM_CONFIG__bank01sel__bit26 26
+#define R_DRAM_CONFIG__bank01sel__bit27 27
+#define R_DRAM_CONFIG__bank01sel__bit28 28
+#define R_DRAM_CONFIG__bank01sel__bit29 29
+
+#define R_SDRAM_CONFIG (IO_TYPECAST_UDWORD 0xb000000c)
+#define R_SDRAM_CONFIG__wmm1__BITNR 31
+#define R_SDRAM_CONFIG__wmm1__WIDTH 1
+#define R_SDRAM_CONFIG__wmm1__wmm 1
+#define R_SDRAM_CONFIG__wmm1__norm 0
+#define R_SDRAM_CONFIG__wmm0__BITNR 30
+#define R_SDRAM_CONFIG__wmm0__WIDTH 1
+#define R_SDRAM_CONFIG__wmm0__wmm 1
+#define R_SDRAM_CONFIG__wmm0__norm 0
+#define R_SDRAM_CONFIG__sh1__BITNR 27
+#define R_SDRAM_CONFIG__sh1__WIDTH 3
+#define R_SDRAM_CONFIG__sh0__BITNR 24
+#define R_SDRAM_CONFIG__sh0__WIDTH 3
+#define R_SDRAM_CONFIG__w__BITNR 23
+#define R_SDRAM_CONFIG__w__WIDTH 1
+#define R_SDRAM_CONFIG__w__bw16 0
+#define R_SDRAM_CONFIG__w__bw32 1
+#define R_SDRAM_CONFIG__type1__BITNR 22
+#define R_SDRAM_CONFIG__type1__WIDTH 1
+#define R_SDRAM_CONFIG__type1__bank2 0
+#define R_SDRAM_CONFIG__type1__bank4 1
+#define R_SDRAM_CONFIG__type0__BITNR 21
+#define R_SDRAM_CONFIG__type0__WIDTH 1
+#define R_SDRAM_CONFIG__type0__bank2 0
+#define R_SDRAM_CONFIG__type0__bank4 1
+#define R_SDRAM_CONFIG__group_sel__BITNR 16
+#define R_SDRAM_CONFIG__group_sel__WIDTH 5
+#define R_SDRAM_CONFIG__group_sel__grp0 0
+#define R_SDRAM_CONFIG__group_sel__grp1 1
+#define R_SDRAM_CONFIG__group_sel__bit9 9
+#define R_SDRAM_CONFIG__group_sel__bit10 10
+#define R_SDRAM_CONFIG__group_sel__bit11 11
+#define R_SDRAM_CONFIG__group_sel__bit12 12
+#define R_SDRAM_CONFIG__group_sel__bit13 13
+#define R_SDRAM_CONFIG__group_sel__bit14 14
+#define R_SDRAM_CONFIG__group_sel__bit15 15
+#define R_SDRAM_CONFIG__group_sel__bit16 16
+#define R_SDRAM_CONFIG__group_sel__bit17 17
+#define R_SDRAM_CONFIG__group_sel__bit18 18
+#define R_SDRAM_CONFIG__group_sel__bit19 19
+#define R_SDRAM_CONFIG__group_sel__bit20 20
+#define R_SDRAM_CONFIG__group_sel__bit21 21
+#define R_SDRAM_CONFIG__group_sel__bit22 22
+#define R_SDRAM_CONFIG__group_sel__bit23 23
+#define R_SDRAM_CONFIG__group_sel__bit24 24
+#define R_SDRAM_CONFIG__group_sel__bit25 25
+#define R_SDRAM_CONFIG__group_sel__bit26 26
+#define R_SDRAM_CONFIG__group_sel__bit27 27
+#define R_SDRAM_CONFIG__group_sel__bit28 28
+#define R_SDRAM_CONFIG__group_sel__bit29 29
+#define R_SDRAM_CONFIG__ca1__BITNR 13
+#define R_SDRAM_CONFIG__ca1__WIDTH 3
+#define R_SDRAM_CONFIG__bank_sel1__BITNR 8
+#define R_SDRAM_CONFIG__bank_sel1__WIDTH 5
+#define R_SDRAM_CONFIG__bank_sel1__bit9 9
+#define R_SDRAM_CONFIG__bank_sel1__bit10 10
+#define R_SDRAM_CONFIG__bank_sel1__bit11 11
+#define R_SDRAM_CONFIG__bank_sel1__bit12 12
+#define R_SDRAM_CONFIG__bank_sel1__bit13 13
+#define R_SDRAM_CONFIG__bank_sel1__bit14 14
+#define R_SDRAM_CONFIG__bank_sel1__bit15 15
+#define R_SDRAM_CONFIG__bank_sel1__bit16 16
+#define R_SDRAM_CONFIG__bank_sel1__bit17 17
+#define R_SDRAM_CONFIG__bank_sel1__bit18 18
+#define R_SDRAM_CONFIG__bank_sel1__bit19 19
+#define R_SDRAM_CONFIG__bank_sel1__bit20 20
+#define R_SDRAM_CONFIG__bank_sel1__bit21 21
+#define R_SDRAM_CONFIG__bank_sel1__bit22 22
+#define R_SDRAM_CONFIG__bank_sel1__bit23 23
+#define R_SDRAM_CONFIG__bank_sel1__bit24 24
+#define R_SDRAM_CONFIG__bank_sel1__bit25 25
+#define R_SDRAM_CONFIG__bank_sel1__bit26 26
+#define R_SDRAM_CONFIG__bank_sel1__bit27 27
+#define R_SDRAM_CONFIG__bank_sel1__bit28 28
+#define R_SDRAM_CONFIG__bank_sel1__bit29 29
+#define R_SDRAM_CONFIG__ca0__BITNR 5
+#define R_SDRAM_CONFIG__ca0__WIDTH 3
+#define R_SDRAM_CONFIG__bank_sel0__BITNR 0
+#define R_SDRAM_CONFIG__bank_sel0__WIDTH 5
+#define R_SDRAM_CONFIG__bank_sel0__bit9 9
+#define R_SDRAM_CONFIG__bank_sel0__bit10 10
+#define R_SDRAM_CONFIG__bank_sel0__bit11 11
+#define R_SDRAM_CONFIG__bank_sel0__bit12 12
+#define R_SDRAM_CONFIG__bank_sel0__bit13 13
+#define R_SDRAM_CONFIG__bank_sel0__bit14 14
+#define R_SDRAM_CONFIG__bank_sel0__bit15 15
+#define R_SDRAM_CONFIG__bank_sel0__bit16 16
+#define R_SDRAM_CONFIG__bank_sel0__bit17 17
+#define R_SDRAM_CONFIG__bank_sel0__bit18 18
+#define R_SDRAM_CONFIG__bank_sel0__bit19 19
+#define R_SDRAM_CONFIG__bank_sel0__bit20 20
+#define R_SDRAM_CONFIG__bank_sel0__bit21 21
+#define R_SDRAM_CONFIG__bank_sel0__bit22 22
+#define R_SDRAM_CONFIG__bank_sel0__bit23 23
+#define R_SDRAM_CONFIG__bank_sel0__bit24 24
+#define R_SDRAM_CONFIG__bank_sel0__bit25 25
+#define R_SDRAM_CONFIG__bank_sel0__bit26 26
+#define R_SDRAM_CONFIG__bank_sel0__bit27 27
+#define R_SDRAM_CONFIG__bank_sel0__bit28 28
+#define R_SDRAM_CONFIG__bank_sel0__bit29 29
+
+/*
+!* External DMA registers
+!*/
+
+#define R_EXT_DMA_0_CMD (IO_TYPECAST_UDWORD 0xb0000010)
+#define R_EXT_DMA_0_CMD__cnt__BITNR 23
+#define R_EXT_DMA_0_CMD__cnt__WIDTH 1
+#define R_EXT_DMA_0_CMD__cnt__enable 1
+#define R_EXT_DMA_0_CMD__cnt__disable 0
+#define R_EXT_DMA_0_CMD__rqpol__BITNR 22
+#define R_EXT_DMA_0_CMD__rqpol__WIDTH 1
+#define R_EXT_DMA_0_CMD__rqpol__ahigh 0
+#define R_EXT_DMA_0_CMD__rqpol__alow 1
+#define R_EXT_DMA_0_CMD__apol__BITNR 21
+#define R_EXT_DMA_0_CMD__apol__WIDTH 1
+#define R_EXT_DMA_0_CMD__apol__ahigh 0
+#define R_EXT_DMA_0_CMD__apol__alow 1
+#define R_EXT_DMA_0_CMD__rq_ack__BITNR 20
+#define R_EXT_DMA_0_CMD__rq_ack__WIDTH 1
+#define R_EXT_DMA_0_CMD__rq_ack__burst 0
+#define R_EXT_DMA_0_CMD__rq_ack__handsh 1
+#define R_EXT_DMA_0_CMD__wid__BITNR 18
+#define R_EXT_DMA_0_CMD__wid__WIDTH 2
+#define R_EXT_DMA_0_CMD__wid__byte 0
+#define R_EXT_DMA_0_CMD__wid__word 1
+#define R_EXT_DMA_0_CMD__wid__dword 2
+#define R_EXT_DMA_0_CMD__dir__BITNR 17
+#define R_EXT_DMA_0_CMD__dir__WIDTH 1
+#define R_EXT_DMA_0_CMD__dir__input 0
+#define R_EXT_DMA_0_CMD__dir__output 1
+#define R_EXT_DMA_0_CMD__run__BITNR 16
+#define R_EXT_DMA_0_CMD__run__WIDTH 1
+#define R_EXT_DMA_0_CMD__run__start 1
+#define R_EXT_DMA_0_CMD__run__stop 0
+#define R_EXT_DMA_0_CMD__trf_count__BITNR 0
+#define R_EXT_DMA_0_CMD__trf_count__WIDTH 16
+
+#define R_EXT_DMA_0_STAT (IO_TYPECAST_RO_UDWORD 0xb0000010)
+#define R_EXT_DMA_0_STAT__run__BITNR 16
+#define R_EXT_DMA_0_STAT__run__WIDTH 1
+#define R_EXT_DMA_0_STAT__run__start 1
+#define R_EXT_DMA_0_STAT__run__stop 0
+#define R_EXT_DMA_0_STAT__trf_count__BITNR 0
+#define R_EXT_DMA_0_STAT__trf_count__WIDTH 16
+
+#define R_EXT_DMA_0_ADDR (IO_TYPECAST_UDWORD 0xb0000014)
+#define R_EXT_DMA_0_ADDR__ext0_addr__BITNR 2
+#define R_EXT_DMA_0_ADDR__ext0_addr__WIDTH 28
+
+#define R_EXT_DMA_1_CMD (IO_TYPECAST_UDWORD 0xb0000018)
+#define R_EXT_DMA_1_CMD__cnt__BITNR 23
+#define R_EXT_DMA_1_CMD__cnt__WIDTH 1
+#define R_EXT_DMA_1_CMD__cnt__enable 1
+#define R_EXT_DMA_1_CMD__cnt__disable 0
+#define R_EXT_DMA_1_CMD__rqpol__BITNR 22
+#define R_EXT_DMA_1_CMD__rqpol__WIDTH 1
+#define R_EXT_DMA_1_CMD__rqpol__ahigh 0
+#define R_EXT_DMA_1_CMD__rqpol__alow 1
+#define R_EXT_DMA_1_CMD__apol__BITNR 21
+#define R_EXT_DMA_1_CMD__apol__WIDTH 1
+#define R_EXT_DMA_1_CMD__apol__ahigh 0
+#define R_EXT_DMA_1_CMD__apol__alow 1
+#define R_EXT_DMA_1_CMD__rq_ack__BITNR 20
+#define R_EXT_DMA_1_CMD__rq_ack__WIDTH 1
+#define R_EXT_DMA_1_CMD__rq_ack__burst 0
+#define R_EXT_DMA_1_CMD__rq_ack__handsh 1
+#define R_EXT_DMA_1_CMD__wid__BITNR 18
+#define R_EXT_DMA_1_CMD__wid__WIDTH 2
+#define R_EXT_DMA_1_CMD__wid__byte 0
+#define R_EXT_DMA_1_CMD__wid__word 1
+#define R_EXT_DMA_1_CMD__wid__dword 2
+#define R_EXT_DMA_1_CMD__dir__BITNR 17
+#define R_EXT_DMA_1_CMD__dir__WIDTH 1
+#define R_EXT_DMA_1_CMD__dir__input 0
+#define R_EXT_DMA_1_CMD__dir__output 1
+#define R_EXT_DMA_1_CMD__run__BITNR 16
+#define R_EXT_DMA_1_CMD__run__WIDTH 1
+#define R_EXT_DMA_1_CMD__run__start 1
+#define R_EXT_DMA_1_CMD__run__stop 0
+#define R_EXT_DMA_1_CMD__trf_count__BITNR 0
+#define R_EXT_DMA_1_CMD__trf_count__WIDTH 16
+
+#define R_EXT_DMA_1_STAT (IO_TYPECAST_RO_UDWORD 0xb0000018)
+#define R_EXT_DMA_1_STAT__run__BITNR 16
+#define R_EXT_DMA_1_STAT__run__WIDTH 1
+#define R_EXT_DMA_1_STAT__run__start 1
+#define R_EXT_DMA_1_STAT__run__stop 0
+#define R_EXT_DMA_1_STAT__trf_count__BITNR 0
+#define R_EXT_DMA_1_STAT__trf_count__WIDTH 16
+
+#define R_EXT_DMA_1_ADDR (IO_TYPECAST_UDWORD 0xb000001c)
+#define R_EXT_DMA_1_ADDR__ext0_addr__BITNR 2
+#define R_EXT_DMA_1_ADDR__ext0_addr__WIDTH 28
+
+/*
+!* Timer registers
+!*/
+
+#define R_TIMER_CTRL (IO_TYPECAST_UDWORD 0xb0000020)
+#define R_TIMER_CTRL__timerdiv1__BITNR 24
+#define R_TIMER_CTRL__timerdiv1__WIDTH 8
+#define R_TIMER_CTRL__timerdiv0__BITNR 16
+#define R_TIMER_CTRL__timerdiv0__WIDTH 8
+#define R_TIMER_CTRL__presc_timer1__BITNR 15
+#define R_TIMER_CTRL__presc_timer1__WIDTH 1
+#define R_TIMER_CTRL__presc_timer1__normal 0
+#define R_TIMER_CTRL__presc_timer1__prescale 1
+#define R_TIMER_CTRL__i1__BITNR 14
+#define R_TIMER_CTRL__i1__WIDTH 1
+#define R_TIMER_CTRL__i1__clr 1
+#define R_TIMER_CTRL__i1__nop 0
+#define R_TIMER_CTRL__tm1__BITNR 12
+#define R_TIMER_CTRL__tm1__WIDTH 2
+#define R_TIMER_CTRL__tm1__stop_ld 0
+#define R_TIMER_CTRL__tm1__freeze 1
+#define R_TIMER_CTRL__tm1__run 2
+#define R_TIMER_CTRL__tm1__reserved 3
+#define R_TIMER_CTRL__clksel1__BITNR 8
+#define R_TIMER_CTRL__clksel1__WIDTH 4
+#define R_TIMER_CTRL__clksel1__c300Hz 0
+#define R_TIMER_CTRL__clksel1__c600Hz 1
+#define R_TIMER_CTRL__clksel1__c1200Hz 2
+#define R_TIMER_CTRL__clksel1__c2400Hz 3
+#define R_TIMER_CTRL__clksel1__c4800Hz 4
+#define R_TIMER_CTRL__clksel1__c9600Hz 5
+#define R_TIMER_CTRL__clksel1__c19k2Hz 6
+#define R_TIMER_CTRL__clksel1__c38k4Hz 7
+#define R_TIMER_CTRL__clksel1__c57k6Hz 8
+#define R_TIMER_CTRL__clksel1__c115k2Hz 9
+#define R_TIMER_CTRL__clksel1__c230k4Hz 10
+#define R_TIMER_CTRL__clksel1__c460k8Hz 11
+#define R_TIMER_CTRL__clksel1__c921k6Hz 12
+#define R_TIMER_CTRL__clksel1__c1843k2Hz 13
+#define R_TIMER_CTRL__clksel1__c6250kHz 14
+#define R_TIMER_CTRL__clksel1__cascade0 15
+#define R_TIMER_CTRL__presc_ext__BITNR 7
+#define R_TIMER_CTRL__presc_ext__WIDTH 1
+#define R_TIMER_CTRL__presc_ext__prescale 0
+#define R_TIMER_CTRL__presc_ext__external 1
+#define R_TIMER_CTRL__i0__BITNR 6
+#define R_TIMER_CTRL__i0__WIDTH 1
+#define R_TIMER_CTRL__i0__clr 1
+#define R_TIMER_CTRL__i0__nop 0
+#define R_TIMER_CTRL__tm0__BITNR 4
+#define R_TIMER_CTRL__tm0__WIDTH 2
+#define R_TIMER_CTRL__tm0__stop_ld 0
+#define R_TIMER_CTRL__tm0__freeze 1
+#define R_TIMER_CTRL__tm0__run 2
+#define R_TIMER_CTRL__tm0__reserved 3
+#define R_TIMER_CTRL__clksel0__BITNR 0
+#define R_TIMER_CTRL__clksel0__WIDTH 4
+#define R_TIMER_CTRL__clksel0__c300Hz 0
+#define R_TIMER_CTRL__clksel0__c600Hz 1
+#define R_TIMER_CTRL__clksel0__c1200Hz 2
+#define R_TIMER_CTRL__clksel0__c2400Hz 3
+#define R_TIMER_CTRL__clksel0__c4800Hz 4
+#define R_TIMER_CTRL__clksel0__c9600Hz 5
+#define R_TIMER_CTRL__clksel0__c19k2Hz 6
+#define R_TIMER_CTRL__clksel0__c38k4Hz 7
+#define R_TIMER_CTRL__clksel0__c57k6Hz 8
+#define R_TIMER_CTRL__clksel0__c115k2Hz 9
+#define R_TIMER_CTRL__clksel0__c230k4Hz 10
+#define R_TIMER_CTRL__clksel0__c460k8Hz 11
+#define R_TIMER_CTRL__clksel0__c921k6Hz 12
+#define R_TIMER_CTRL__clksel0__c1843k2Hz 13
+#define R_TIMER_CTRL__clksel0__c6250kHz 14
+#define R_TIMER_CTRL__clksel0__flexible 15
+
+#define R_TIMER_DATA (IO_TYPECAST_RO_UDWORD 0xb0000020)
+#define R_TIMER_DATA__timer1__BITNR 24
+#define R_TIMER_DATA__timer1__WIDTH 8
+#define R_TIMER_DATA__timer0__BITNR 16
+#define R_TIMER_DATA__timer0__WIDTH 8
+#define R_TIMER_DATA__clkdiv_high__BITNR 8
+#define R_TIMER_DATA__clkdiv_high__WIDTH 8
+#define R_TIMER_DATA__clkdiv_low__BITNR 0
+#define R_TIMER_DATA__clkdiv_low__WIDTH 8
+
+#define R_TIMER01_DATA (IO_TYPECAST_RO_UWORD 0xb0000022)
+#define R_TIMER01_DATA__count__BITNR 0
+#define R_TIMER01_DATA__count__WIDTH 16
+
+#define R_TIMER0_DATA (IO_TYPECAST_RO_BYTE 0xb0000022)
+#define R_TIMER0_DATA__count__BITNR 0
+#define R_TIMER0_DATA__count__WIDTH 8
+
+#define R_TIMER1_DATA (IO_TYPECAST_RO_BYTE 0xb0000023)
+#define R_TIMER1_DATA__count__BITNR 0
+#define R_TIMER1_DATA__count__WIDTH 8
+
+#define R_WATCHDOG (IO_TYPECAST_UDWORD 0xb0000024)
+#define R_WATCHDOG__key__BITNR 1
+#define R_WATCHDOG__key__WIDTH 3
+#define R_WATCHDOG__enable__BITNR 0
+#define R_WATCHDOG__enable__WIDTH 1
+#define R_WATCHDOG__enable__stop 0
+#define R_WATCHDOG__enable__start 1
+
+#define R_CLOCK_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f0)
+#define R_CLOCK_PRESCALE__ser_presc__BITNR 16
+#define R_CLOCK_PRESCALE__ser_presc__WIDTH 16
+#define R_CLOCK_PRESCALE__tim_presc__BITNR 0
+#define R_CLOCK_PRESCALE__tim_presc__WIDTH 16
+
+#define R_SERIAL_PRESCALE (IO_TYPECAST_UWORD 0xb00000f2)
+#define R_SERIAL_PRESCALE__ser_presc__BITNR 0
+#define R_SERIAL_PRESCALE__ser_presc__WIDTH 16
+
+#define R_TIMER_PRESCALE (IO_TYPECAST_UWORD 0xb00000f0)
+#define R_TIMER_PRESCALE__tim_presc__BITNR 0
+#define R_TIMER_PRESCALE__tim_presc__WIDTH 16
+
+#define R_PRESCALE_STATUS (IO_TYPECAST_RO_UDWORD 0xb00000f0)
+#define R_PRESCALE_STATUS__ser_status__BITNR 16
+#define R_PRESCALE_STATUS__ser_status__WIDTH 16
+#define R_PRESCALE_STATUS__tim_status__BITNR 0
+#define R_PRESCALE_STATUS__tim_status__WIDTH 16
+
+#define R_SER_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f2)
+#define R_SER_PRESC_STATUS__ser_status__BITNR 0
+#define R_SER_PRESC_STATUS__ser_status__WIDTH 16
+
+#define R_TIM_PRESC_STATUS (IO_TYPECAST_RO_UWORD 0xb00000f0)
+#define R_TIM_PRESC_STATUS__tim_status__BITNR 0
+#define R_TIM_PRESC_STATUS__tim_status__WIDTH 16
+
+#define R_SYNC_SERIAL_PRESCALE (IO_TYPECAST_UDWORD 0xb00000f4)
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__BITNR 23
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__WIDTH 1
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__codec 0
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u3__baudrate 1
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__BITNR 22
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__WIDTH 1
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__external 0
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__internal 1
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__BITNR 21
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__WIDTH 1
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__codec 0
+#define R_SYNC_SERIAL_PRESCALE__clk_sel_u1__baudrate 1
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__BITNR 20
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__WIDTH 1
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__external 0
+#define R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__internal 1
+#define R_SYNC_SERIAL_PRESCALE__prescaler__BITNR 16
+#define R_SYNC_SERIAL_PRESCALE__prescaler__WIDTH 3
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div1 0
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div2 1
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div4 2
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div8 3
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div16 4
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div32 5
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div64 6
+#define R_SYNC_SERIAL_PRESCALE__prescaler__div128 7
+#define R_SYNC_SERIAL_PRESCALE__warp_mode__BITNR 15
+#define R_SYNC_SERIAL_PRESCALE__warp_mode__WIDTH 1
+#define R_SYNC_SERIAL_PRESCALE__warp_mode__normal 0
+#define R_SYNC_SERIAL_PRESCALE__warp_mode__enabled 1
+#define R_SYNC_SERIAL_PRESCALE__frame_rate__BITNR 11
+#define R_SYNC_SERIAL_PRESCALE__frame_rate__WIDTH 4
+#define R_SYNC_SERIAL_PRESCALE__word_rate__BITNR 0
+#define R_SYNC_SERIAL_PRESCALE__word_rate__WIDTH 10
+
+/*
+!* Shared RAM interface registers
+!*/
+
+#define R_SHARED_RAM_CONFIG (IO_TYPECAST_UDWORD 0xb0000040)
+#define R_SHARED_RAM_CONFIG__width__BITNR 3
+#define R_SHARED_RAM_CONFIG__width__WIDTH 1
+#define R_SHARED_RAM_CONFIG__width__byte 0
+#define R_SHARED_RAM_CONFIG__width__word 1
+#define R_SHARED_RAM_CONFIG__enable__BITNR 2
+#define R_SHARED_RAM_CONFIG__enable__WIDTH 1
+#define R_SHARED_RAM_CONFIG__enable__yes 1
+#define R_SHARED_RAM_CONFIG__enable__no 0
+#define R_SHARED_RAM_CONFIG__pint__BITNR 1
+#define R_SHARED_RAM_CONFIG__pint__WIDTH 1
+#define R_SHARED_RAM_CONFIG__pint__int 1
+#define R_SHARED_RAM_CONFIG__pint__nop 0
+#define R_SHARED_RAM_CONFIG__clri__BITNR 0
+#define R_SHARED_RAM_CONFIG__clri__WIDTH 1
+#define R_SHARED_RAM_CONFIG__clri__clr 1
+#define R_SHARED_RAM_CONFIG__clri__nop 0
+
+#define R_SHARED_RAM_ADDR (IO_TYPECAST_UDWORD 0xb0000044)
+#define R_SHARED_RAM_ADDR__base_addr__BITNR 8
+#define R_SHARED_RAM_ADDR__base_addr__WIDTH 22
+
+/*
+!* General config registers
+!*/
+
+#define R_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb000002c)
+#define R_GEN_CONFIG__par_w__BITNR 31
+#define R_GEN_CONFIG__par_w__WIDTH 1
+#define R_GEN_CONFIG__par_w__select 1
+#define R_GEN_CONFIG__par_w__disable 0
+#define R_GEN_CONFIG__usb2__BITNR 30
+#define R_GEN_CONFIG__usb2__WIDTH 1
+#define R_GEN_CONFIG__usb2__select 1
+#define R_GEN_CONFIG__usb2__disable 0
+#define R_GEN_CONFIG__usb1__BITNR 29
+#define R_GEN_CONFIG__usb1__WIDTH 1
+#define R_GEN_CONFIG__usb1__select 1
+#define R_GEN_CONFIG__usb1__disable 0
+#define R_GEN_CONFIG__g24dir__BITNR 27
+#define R_GEN_CONFIG__g24dir__WIDTH 1
+#define R_GEN_CONFIG__g24dir__in 0
+#define R_GEN_CONFIG__g24dir__out 1
+#define R_GEN_CONFIG__g16_23dir__BITNR 26
+#define R_GEN_CONFIG__g16_23dir__WIDTH 1
+#define R_GEN_CONFIG__g16_23dir__in 0
+#define R_GEN_CONFIG__g16_23dir__out 1
+#define R_GEN_CONFIG__g8_15dir__BITNR 25
+#define R_GEN_CONFIG__g8_15dir__WIDTH 1
+#define R_GEN_CONFIG__g8_15dir__in 0
+#define R_GEN_CONFIG__g8_15dir__out 1
+#define R_GEN_CONFIG__g0dir__BITNR 24
+#define R_GEN_CONFIG__g0dir__WIDTH 1
+#define R_GEN_CONFIG__g0dir__in 0
+#define R_GEN_CONFIG__g0dir__out 1
+#define R_GEN_CONFIG__dma9__BITNR 23
+#define R_GEN_CONFIG__dma9__WIDTH 1
+#define R_GEN_CONFIG__dma9__usb 0
+#define R_GEN_CONFIG__dma9__serial1 1
+#define R_GEN_CONFIG__dma8__BITNR 22
+#define R_GEN_CONFIG__dma8__WIDTH 1
+#define R_GEN_CONFIG__dma8__usb 0
+#define R_GEN_CONFIG__dma8__serial1 1
+#define R_GEN_CONFIG__dma7__BITNR 20
+#define R_GEN_CONFIG__dma7__WIDTH 2
+#define R_GEN_CONFIG__dma7__unused 0
+#define R_GEN_CONFIG__dma7__serial0 1
+#define R_GEN_CONFIG__dma7__extdma1 2
+#define R_GEN_CONFIG__dma7__intdma6 3
+#define R_GEN_CONFIG__dma6__BITNR 18
+#define R_GEN_CONFIG__dma6__WIDTH 2
+#define R_GEN_CONFIG__dma6__unused 0
+#define R_GEN_CONFIG__dma6__serial0 1
+#define R_GEN_CONFIG__dma6__extdma1 2
+#define R_GEN_CONFIG__dma6__intdma7 3
+#define R_GEN_CONFIG__dma5__BITNR 16
+#define R_GEN_CONFIG__dma5__WIDTH 2
+#define R_GEN_CONFIG__dma5__par1 0
+#define R_GEN_CONFIG__dma5__scsi1 1
+#define R_GEN_CONFIG__dma5__serial3 2
+#define R_GEN_CONFIG__dma5__extdma0 3
+#define R_GEN_CONFIG__dma4__BITNR 14
+#define R_GEN_CONFIG__dma4__WIDTH 2
+#define R_GEN_CONFIG__dma4__par1 0
+#define R_GEN_CONFIG__dma4__scsi1 1
+#define R_GEN_CONFIG__dma4__serial3 2
+#define R_GEN_CONFIG__dma4__extdma0 3
+#define R_GEN_CONFIG__dma3__BITNR 12
+#define R_GEN_CONFIG__dma3__WIDTH 2
+#define R_GEN_CONFIG__dma3__par0 0
+#define R_GEN_CONFIG__dma3__scsi0 1
+#define R_GEN_CONFIG__dma3__serial2 2
+#define R_GEN_CONFIG__dma3__ata 3
+#define R_GEN_CONFIG__dma2__BITNR 10
+#define R_GEN_CONFIG__dma2__WIDTH 2
+#define R_GEN_CONFIG__dma2__par0 0
+#define R_GEN_CONFIG__dma2__scsi0 1
+#define R_GEN_CONFIG__dma2__serial2 2
+#define R_GEN_CONFIG__dma2__ata 3
+#define R_GEN_CONFIG__mio_w__BITNR 9
+#define R_GEN_CONFIG__mio_w__WIDTH 1
+#define R_GEN_CONFIG__mio_w__select 1
+#define R_GEN_CONFIG__mio_w__disable 0
+#define R_GEN_CONFIG__ser3__BITNR 8
+#define R_GEN_CONFIG__ser3__WIDTH 1
+#define R_GEN_CONFIG__ser3__select 1
+#define R_GEN_CONFIG__ser3__disable 0
+#define R_GEN_CONFIG__par1__BITNR 7
+#define R_GEN_CONFIG__par1__WIDTH 1
+#define R_GEN_CONFIG__par1__select 1
+#define R_GEN_CONFIG__par1__disable 0
+#define R_GEN_CONFIG__scsi0w__BITNR 6
+#define R_GEN_CONFIG__scsi0w__WIDTH 1
+#define R_GEN_CONFIG__scsi0w__select 1
+#define R_GEN_CONFIG__scsi0w__disable 0
+#define R_GEN_CONFIG__scsi1__BITNR 5
+#define R_GEN_CONFIG__scsi1__WIDTH 1
+#define R_GEN_CONFIG__scsi1__select 1
+#define R_GEN_CONFIG__scsi1__disable 0
+#define R_GEN_CONFIG__mio__BITNR 4
+#define R_GEN_CONFIG__mio__WIDTH 1
+#define R_GEN_CONFIG__mio__select 1
+#define R_GEN_CONFIG__mio__disable 0
+#define R_GEN_CONFIG__ser2__BITNR 3
+#define R_GEN_CONFIG__ser2__WIDTH 1
+#define R_GEN_CONFIG__ser2__select 1
+#define R_GEN_CONFIG__ser2__disable 0
+#define R_GEN_CONFIG__par0__BITNR 2
+#define R_GEN_CONFIG__par0__WIDTH 1
+#define R_GEN_CONFIG__par0__select 1
+#define R_GEN_CONFIG__par0__disable 0
+#define R_GEN_CONFIG__ata__BITNR 1
+#define R_GEN_CONFIG__ata__WIDTH 1
+#define R_GEN_CONFIG__ata__select 1
+#define R_GEN_CONFIG__ata__disable 0
+#define R_GEN_CONFIG__scsi0__BITNR 0
+#define R_GEN_CONFIG__scsi0__WIDTH 1
+#define R_GEN_CONFIG__scsi0__select 1
+#define R_GEN_CONFIG__scsi0__disable 0
+
+#define R_GEN_CONFIG_II (IO_TYPECAST_UDWORD 0xb0000034)
+#define R_GEN_CONFIG_II__sermode3__BITNR 6
+#define R_GEN_CONFIG_II__sermode3__WIDTH 1
+#define R_GEN_CONFIG_II__sermode3__async 0
+#define R_GEN_CONFIG_II__sermode3__sync 1
+#define R_GEN_CONFIG_II__sermode1__BITNR 4
+#define R_GEN_CONFIG_II__sermode1__WIDTH 1
+#define R_GEN_CONFIG_II__sermode1__async 0
+#define R_GEN_CONFIG_II__sermode1__sync 1
+#define R_GEN_CONFIG_II__ext_clk__BITNR 2
+#define R_GEN_CONFIG_II__ext_clk__WIDTH 1
+#define R_GEN_CONFIG_II__ext_clk__select 1
+#define R_GEN_CONFIG_II__ext_clk__disable 0
+#define R_GEN_CONFIG_II__ser2__BITNR 1
+#define R_GEN_CONFIG_II__ser2__WIDTH 1
+#define R_GEN_CONFIG_II__ser2__select 1
+#define R_GEN_CONFIG_II__ser2__disable 0
+#define R_GEN_CONFIG_II__ser3__BITNR 0
+#define R_GEN_CONFIG_II__ser3__WIDTH 1
+#define R_GEN_CONFIG_II__ser3__select 1
+#define R_GEN_CONFIG_II__ser3__disable 0
+
+#define R_PORT_G_DATA (IO_TYPECAST_UDWORD 0xb0000028)
+#define R_PORT_G_DATA__data__BITNR 0
+#define R_PORT_G_DATA__data__WIDTH 32
+
+/*
+!* General port configuration registers
+!*/
+
+#define R_PORT_PA_SET (IO_TYPECAST_UDWORD 0xb0000030)
+#define R_PORT_PA_SET__dir7__BITNR 15
+#define R_PORT_PA_SET__dir7__WIDTH 1
+#define R_PORT_PA_SET__dir7__input 0
+#define R_PORT_PA_SET__dir7__output 1
+#define R_PORT_PA_SET__dir6__BITNR 14
+#define R_PORT_PA_SET__dir6__WIDTH 1
+#define R_PORT_PA_SET__dir6__input 0
+#define R_PORT_PA_SET__dir6__output 1
+#define R_PORT_PA_SET__dir5__BITNR 13
+#define R_PORT_PA_SET__dir5__WIDTH 1
+#define R_PORT_PA_SET__dir5__input 0
+#define R_PORT_PA_SET__dir5__output 1
+#define R_PORT_PA_SET__dir4__BITNR 12
+#define R_PORT_PA_SET__dir4__WIDTH 1
+#define R_PORT_PA_SET__dir4__input 0
+#define R_PORT_PA_SET__dir4__output 1
+#define R_PORT_PA_SET__dir3__BITNR 11
+#define R_PORT_PA_SET__dir3__WIDTH 1
+#define R_PORT_PA_SET__dir3__input 0
+#define R_PORT_PA_SET__dir3__output 1
+#define R_PORT_PA_SET__dir2__BITNR 10
+#define R_PORT_PA_SET__dir2__WIDTH 1
+#define R_PORT_PA_SET__dir2__input 0
+#define R_PORT_PA_SET__dir2__output 1
+#define R_PORT_PA_SET__dir1__BITNR 9
+#define R_PORT_PA_SET__dir1__WIDTH 1
+#define R_PORT_PA_SET__dir1__input 0
+#define R_PORT_PA_SET__dir1__output 1
+#define R_PORT_PA_SET__dir0__BITNR 8
+#define R_PORT_PA_SET__dir0__WIDTH 1
+#define R_PORT_PA_SET__dir0__input 0
+#define R_PORT_PA_SET__dir0__output 1
+#define R_PORT_PA_SET__data_out__BITNR 0
+#define R_PORT_PA_SET__data_out__WIDTH 8
+
+#define R_PORT_PA_DATA (IO_TYPECAST_BYTE 0xb0000030)
+#define R_PORT_PA_DATA__data_out__BITNR 0
+#define R_PORT_PA_DATA__data_out__WIDTH 8
+
+#define R_PORT_PA_DIR (IO_TYPECAST_BYTE 0xb0000031)
+#define R_PORT_PA_DIR__dir7__BITNR 7
+#define R_PORT_PA_DIR__dir7__WIDTH 1
+#define R_PORT_PA_DIR__dir7__input 0
+#define R_PORT_PA_DIR__dir7__output 1
+#define R_PORT_PA_DIR__dir6__BITNR 6
+#define R_PORT_PA_DIR__dir6__WIDTH 1
+#define R_PORT_PA_DIR__dir6__input 0
+#define R_PORT_PA_DIR__dir6__output 1
+#define R_PORT_PA_DIR__dir5__BITNR 5
+#define R_PORT_PA_DIR__dir5__WIDTH 1
+#define R_PORT_PA_DIR__dir5__input 0
+#define R_PORT_PA_DIR__dir5__output 1
+#define R_PORT_PA_DIR__dir4__BITNR 4
+#define R_PORT_PA_DIR__dir4__WIDTH 1
+#define R_PORT_PA_DIR__dir4__input 0
+#define R_PORT_PA_DIR__dir4__output 1
+#define R_PORT_PA_DIR__dir3__BITNR 3
+#define R_PORT_PA_DIR__dir3__WIDTH 1
+#define R_PORT_PA_DIR__dir3__input 0
+#define R_PORT_PA_DIR__dir3__output 1
+#define R_PORT_PA_DIR__dir2__BITNR 2
+#define R_PORT_PA_DIR__dir2__WIDTH 1
+#define R_PORT_PA_DIR__dir2__input 0
+#define R_PORT_PA_DIR__dir2__output 1
+#define R_PORT_PA_DIR__dir1__BITNR 1
+#define R_PORT_PA_DIR__dir1__WIDTH 1
+#define R_PORT_PA_DIR__dir1__input 0
+#define R_PORT_PA_DIR__dir1__output 1
+#define R_PORT_PA_DIR__dir0__BITNR 0
+#define R_PORT_PA_DIR__dir0__WIDTH 1
+#define R_PORT_PA_DIR__dir0__input 0
+#define R_PORT_PA_DIR__dir0__output 1
+
+#define R_PORT_PA_READ (IO_TYPECAST_RO_UDWORD 0xb0000030)
+#define R_PORT_PA_READ__data_in__BITNR 0
+#define R_PORT_PA_READ__data_in__WIDTH 8
+
+#define R_PORT_PB_SET (IO_TYPECAST_UDWORD 0xb0000038)
+#define R_PORT_PB_SET__syncser3__BITNR 29
+#define R_PORT_PB_SET__syncser3__WIDTH 1
+#define R_PORT_PB_SET__syncser3__port_cs 0
+#define R_PORT_PB_SET__syncser3__ss3extra 1
+#define R_PORT_PB_SET__syncser1__BITNR 28
+#define R_PORT_PB_SET__syncser1__WIDTH 1
+#define R_PORT_PB_SET__syncser1__port_cs 0
+#define R_PORT_PB_SET__syncser1__ss1extra 1
+#define R_PORT_PB_SET__i2c_en__BITNR 27
+#define R_PORT_PB_SET__i2c_en__WIDTH 1
+#define R_PORT_PB_SET__i2c_en__off 0
+#define R_PORT_PB_SET__i2c_en__on 1
+#define R_PORT_PB_SET__i2c_d__BITNR 26
+#define R_PORT_PB_SET__i2c_d__WIDTH 1
+#define R_PORT_PB_SET__i2c_clk__BITNR 25
+#define R_PORT_PB_SET__i2c_clk__WIDTH 1
+#define R_PORT_PB_SET__i2c_oe___BITNR 24
+#define R_PORT_PB_SET__i2c_oe___WIDTH 1
+#define R_PORT_PB_SET__i2c_oe___enable 0
+#define R_PORT_PB_SET__i2c_oe___disable 1
+#define R_PORT_PB_SET__cs7__BITNR 23
+#define R_PORT_PB_SET__cs7__WIDTH 1
+#define R_PORT_PB_SET__cs7__port 0
+#define R_PORT_PB_SET__cs7__cs 1
+#define R_PORT_PB_SET__cs6__BITNR 22
+#define R_PORT_PB_SET__cs6__WIDTH 1
+#define R_PORT_PB_SET__cs6__port 0
+#define R_PORT_PB_SET__cs6__cs 1
+#define R_PORT_PB_SET__cs5__BITNR 21
+#define R_PORT_PB_SET__cs5__WIDTH 1
+#define R_PORT_PB_SET__cs5__port 0
+#define R_PORT_PB_SET__cs5__cs 1
+#define R_PORT_PB_SET__cs4__BITNR 20
+#define R_PORT_PB_SET__cs4__WIDTH 1
+#define R_PORT_PB_SET__cs4__port 0
+#define R_PORT_PB_SET__cs4__cs 1
+#define R_PORT_PB_SET__cs3__BITNR 19
+#define R_PORT_PB_SET__cs3__WIDTH 1
+#define R_PORT_PB_SET__cs3__port 0
+#define R_PORT_PB_SET__cs3__cs 1
+#define R_PORT_PB_SET__cs2__BITNR 18
+#define R_PORT_PB_SET__cs2__WIDTH 1
+#define R_PORT_PB_SET__cs2__port 0
+#define R_PORT_PB_SET__cs2__cs 1
+#define R_PORT_PB_SET__scsi1__BITNR 17
+#define R_PORT_PB_SET__scsi1__WIDTH 1
+#define R_PORT_PB_SET__scsi1__port_cs 0
+#define R_PORT_PB_SET__scsi1__enph 1
+#define R_PORT_PB_SET__scsi0__BITNR 16
+#define R_PORT_PB_SET__scsi0__WIDTH 1
+#define R_PORT_PB_SET__scsi0__port_cs 0
+#define R_PORT_PB_SET__scsi0__enph 1
+#define R_PORT_PB_SET__dir7__BITNR 15
+#define R_PORT_PB_SET__dir7__WIDTH 1
+#define R_PORT_PB_SET__dir7__input 0
+#define R_PORT_PB_SET__dir7__output 1
+#define R_PORT_PB_SET__dir6__BITNR 14
+#define R_PORT_PB_SET__dir6__WIDTH 1
+#define R_PORT_PB_SET__dir6__input 0
+#define R_PORT_PB_SET__dir6__output 1
+#define R_PORT_PB_SET__dir5__BITNR 13
+#define R_PORT_PB_SET__dir5__WIDTH 1
+#define R_PORT_PB_SET__dir5__input 0
+#define R_PORT_PB_SET__dir5__output 1
+#define R_PORT_PB_SET__dir4__BITNR 12
+#define R_PORT_PB_SET__dir4__WIDTH 1
+#define R_PORT_PB_SET__dir4__input 0
+#define R_PORT_PB_SET__dir4__output 1
+#define R_PORT_PB_SET__dir3__BITNR 11
+#define R_PORT_PB_SET__dir3__WIDTH 1
+#define R_PORT_PB_SET__dir3__input 0
+#define R_PORT_PB_SET__dir3__output 1
+#define R_PORT_PB_SET__dir2__BITNR 10
+#define R_PORT_PB_SET__dir2__WIDTH 1
+#define R_PORT_PB_SET__dir2__input 0
+#define R_PORT_PB_SET__dir2__output 1
+#define R_PORT_PB_SET__dir1__BITNR 9
+#define R_PORT_PB_SET__dir1__WIDTH 1
+#define R_PORT_PB_SET__dir1__input 0
+#define R_PORT_PB_SET__dir1__output 1
+#define R_PORT_PB_SET__dir0__BITNR 8
+#define R_PORT_PB_SET__dir0__WIDTH 1
+#define R_PORT_PB_SET__dir0__input 0
+#define R_PORT_PB_SET__dir0__output 1
+#define R_PORT_PB_SET__data_out__BITNR 0
+#define R_PORT_PB_SET__data_out__WIDTH 8
+
+#define R_PORT_PB_DATA (IO_TYPECAST_BYTE 0xb0000038)
+#define R_PORT_PB_DATA__data_out__BITNR 0
+#define R_PORT_PB_DATA__data_out__WIDTH 8
+
+#define R_PORT_PB_DIR (IO_TYPECAST_BYTE 0xb0000039)
+#define R_PORT_PB_DIR__dir7__BITNR 7
+#define R_PORT_PB_DIR__dir7__WIDTH 1
+#define R_PORT_PB_DIR__dir7__input 0
+#define R_PORT_PB_DIR__dir7__output 1
+#define R_PORT_PB_DIR__dir6__BITNR 6
+#define R_PORT_PB_DIR__dir6__WIDTH 1
+#define R_PORT_PB_DIR__dir6__input 0
+#define R_PORT_PB_DIR__dir6__output 1
+#define R_PORT_PB_DIR__dir5__BITNR 5
+#define R_PORT_PB_DIR__dir5__WIDTH 1
+#define R_PORT_PB_DIR__dir5__input 0
+#define R_PORT_PB_DIR__dir5__output 1
+#define R_PORT_PB_DIR__dir4__BITNR 4
+#define R_PORT_PB_DIR__dir4__WIDTH 1
+#define R_PORT_PB_DIR__dir4__input 0
+#define R_PORT_PB_DIR__dir4__output 1
+#define R_PORT_PB_DIR__dir3__BITNR 3
+#define R_PORT_PB_DIR__dir3__WIDTH 1
+#define R_PORT_PB_DIR__dir3__input 0
+#define R_PORT_PB_DIR__dir3__output 1
+#define R_PORT_PB_DIR__dir2__BITNR 2
+#define R_PORT_PB_DIR__dir2__WIDTH 1
+#define R_PORT_PB_DIR__dir2__input 0
+#define R_PORT_PB_DIR__dir2__output 1
+#define R_PORT_PB_DIR__dir1__BITNR 1
+#define R_PORT_PB_DIR__dir1__WIDTH 1
+#define R_PORT_PB_DIR__dir1__input 0
+#define R_PORT_PB_DIR__dir1__output 1
+#define R_PORT_PB_DIR__dir0__BITNR 0
+#define R_PORT_PB_DIR__dir0__WIDTH 1
+#define R_PORT_PB_DIR__dir0__input 0
+#define R_PORT_PB_DIR__dir0__output 1
+
+#define R_PORT_PB_CONFIG (IO_TYPECAST_BYTE 0xb000003a)
+#define R_PORT_PB_CONFIG__cs7__BITNR 7
+#define R_PORT_PB_CONFIG__cs7__WIDTH 1
+#define R_PORT_PB_CONFIG__cs7__port 0
+#define R_PORT_PB_CONFIG__cs7__cs 1
+#define R_PORT_PB_CONFIG__cs6__BITNR 6
+#define R_PORT_PB_CONFIG__cs6__WIDTH 1
+#define R_PORT_PB_CONFIG__cs6__port 0
+#define R_PORT_PB_CONFIG__cs6__cs 1
+#define R_PORT_PB_CONFIG__cs5__BITNR 5
+#define R_PORT_PB_CONFIG__cs5__WIDTH 1
+#define R_PORT_PB_CONFIG__cs5__port 0
+#define R_PORT_PB_CONFIG__cs5__cs 1
+#define R_PORT_PB_CONFIG__cs4__BITNR 4
+#define R_PORT_PB_CONFIG__cs4__WIDTH 1
+#define R_PORT_PB_CONFIG__cs4__port 0
+#define R_PORT_PB_CONFIG__cs4__cs 1
+#define R_PORT_PB_CONFIG__cs3__BITNR 3
+#define R_PORT_PB_CONFIG__cs3__WIDTH 1
+#define R_PORT_PB_CONFIG__cs3__port 0
+#define R_PORT_PB_CONFIG__cs3__cs 1
+#define R_PORT_PB_CONFIG__cs2__BITNR 2
+#define R_PORT_PB_CONFIG__cs2__WIDTH 1
+#define R_PORT_PB_CONFIG__cs2__port 0
+#define R_PORT_PB_CONFIG__cs2__cs 1
+#define R_PORT_PB_CONFIG__scsi1__BITNR 1
+#define R_PORT_PB_CONFIG__scsi1__WIDTH 1
+#define R_PORT_PB_CONFIG__scsi1__port_cs 0
+#define R_PORT_PB_CONFIG__scsi1__enph 1
+#define R_PORT_PB_CONFIG__scsi0__BITNR 0
+#define R_PORT_PB_CONFIG__scsi0__WIDTH 1
+#define R_PORT_PB_CONFIG__scsi0__port_cs 0
+#define R_PORT_PB_CONFIG__scsi0__enph 1
+
+#define R_PORT_PB_I2C (IO_TYPECAST_BYTE 0xb000003b)
+#define R_PORT_PB_I2C__syncser3__BITNR 5
+#define R_PORT_PB_I2C__syncser3__WIDTH 1
+#define R_PORT_PB_I2C__syncser3__port_cs 0
+#define R_PORT_PB_I2C__syncser3__ss3extra 1
+#define R_PORT_PB_I2C__syncser1__BITNR 4
+#define R_PORT_PB_I2C__syncser1__WIDTH 1
+#define R_PORT_PB_I2C__syncser1__port_cs 0
+#define R_PORT_PB_I2C__syncser1__ss1extra 1
+#define R_PORT_PB_I2C__i2c_en__BITNR 3
+#define R_PORT_PB_I2C__i2c_en__WIDTH 1
+#define R_PORT_PB_I2C__i2c_en__off 0
+#define R_PORT_PB_I2C__i2c_en__on 1
+#define R_PORT_PB_I2C__i2c_d__BITNR 2
+#define R_PORT_PB_I2C__i2c_d__WIDTH 1
+#define R_PORT_PB_I2C__i2c_clk__BITNR 1
+#define R_PORT_PB_I2C__i2c_clk__WIDTH 1
+#define R_PORT_PB_I2C__i2c_oe___BITNR 0
+#define R_PORT_PB_I2C__i2c_oe___WIDTH 1
+#define R_PORT_PB_I2C__i2c_oe___enable 0
+#define R_PORT_PB_I2C__i2c_oe___disable 1
+
+#define R_PORT_PB_READ (IO_TYPECAST_RO_UDWORD 0xb0000038)
+#define R_PORT_PB_READ__data_in__BITNR 0
+#define R_PORT_PB_READ__data_in__WIDTH 8
+
+/*
+!* Serial port registers
+!*/
+
+#define R_SERIAL0_CTRL (IO_TYPECAST_UDWORD 0xb0000060)
+#define R_SERIAL0_CTRL__tr_baud__BITNR 28
+#define R_SERIAL0_CTRL__tr_baud__WIDTH 4
+#define R_SERIAL0_CTRL__tr_baud__c300Hz 0
+#define R_SERIAL0_CTRL__tr_baud__c600Hz 1
+#define R_SERIAL0_CTRL__tr_baud__c1200Hz 2
+#define R_SERIAL0_CTRL__tr_baud__c2400Hz 3
+#define R_SERIAL0_CTRL__tr_baud__c4800Hz 4
+#define R_SERIAL0_CTRL__tr_baud__c9600Hz 5
+#define R_SERIAL0_CTRL__tr_baud__c19k2Hz 6
+#define R_SERIAL0_CTRL__tr_baud__c38k4Hz 7
+#define R_SERIAL0_CTRL__tr_baud__c57k6Hz 8
+#define R_SERIAL0_CTRL__tr_baud__c115k2Hz 9
+#define R_SERIAL0_CTRL__tr_baud__c230k4Hz 10
+#define R_SERIAL0_CTRL__tr_baud__c460k8Hz 11
+#define R_SERIAL0_CTRL__tr_baud__c921k6Hz 12
+#define R_SERIAL0_CTRL__tr_baud__c1843k2Hz 13
+#define R_SERIAL0_CTRL__tr_baud__c6250kHz 14
+#define R_SERIAL0_CTRL__tr_baud__reserved 15
+#define R_SERIAL0_CTRL__rec_baud__BITNR 24
+#define R_SERIAL0_CTRL__rec_baud__WIDTH 4
+#define R_SERIAL0_CTRL__rec_baud__c300Hz 0
+#define R_SERIAL0_CTRL__rec_baud__c600Hz 1
+#define R_SERIAL0_CTRL__rec_baud__c1200Hz 2
+#define R_SERIAL0_CTRL__rec_baud__c2400Hz 3
+#define R_SERIAL0_CTRL__rec_baud__c4800Hz 4
+#define R_SERIAL0_CTRL__rec_baud__c9600Hz 5
+#define R_SERIAL0_CTRL__rec_baud__c19k2Hz 6
+#define R_SERIAL0_CTRL__rec_baud__c38k4Hz 7
+#define R_SERIAL0_CTRL__rec_baud__c57k6Hz 8
+#define R_SERIAL0_CTRL__rec_baud__c115k2Hz 9
+#define R_SERIAL0_CTRL__rec_baud__c230k4Hz 10
+#define R_SERIAL0_CTRL__rec_baud__c460k8Hz 11
+#define R_SERIAL0_CTRL__rec_baud__c921k6Hz 12
+#define R_SERIAL0_CTRL__rec_baud__c1843k2Hz 13
+#define R_SERIAL0_CTRL__rec_baud__c6250kHz 14
+#define R_SERIAL0_CTRL__rec_baud__reserved 15
+#define R_SERIAL0_CTRL__dma_err__BITNR 23
+#define R_SERIAL0_CTRL__dma_err__WIDTH 1
+#define R_SERIAL0_CTRL__dma_err__stop 0
+#define R_SERIAL0_CTRL__dma_err__ignore 1
+#define R_SERIAL0_CTRL__rec_enable__BITNR 22
+#define R_SERIAL0_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL0_CTRL__rec_enable__disable 0
+#define R_SERIAL0_CTRL__rec_enable__enable 1
+#define R_SERIAL0_CTRL__rts___BITNR 21
+#define R_SERIAL0_CTRL__rts___WIDTH 1
+#define R_SERIAL0_CTRL__rts___active 0
+#define R_SERIAL0_CTRL__rts___inactive 1
+#define R_SERIAL0_CTRL__sampling__BITNR 20
+#define R_SERIAL0_CTRL__sampling__WIDTH 1
+#define R_SERIAL0_CTRL__sampling__middle 0
+#define R_SERIAL0_CTRL__sampling__majority 1
+#define R_SERIAL0_CTRL__rec_stick_par__BITNR 19
+#define R_SERIAL0_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL0_CTRL__rec_stick_par__normal 0
+#define R_SERIAL0_CTRL__rec_stick_par__stick 1
+#define R_SERIAL0_CTRL__rec_par__BITNR 18
+#define R_SERIAL0_CTRL__rec_par__WIDTH 1
+#define R_SERIAL0_CTRL__rec_par__even 0
+#define R_SERIAL0_CTRL__rec_par__odd 1
+#define R_SERIAL0_CTRL__rec_par_en__BITNR 17
+#define R_SERIAL0_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL0_CTRL__rec_par_en__disable 0
+#define R_SERIAL0_CTRL__rec_par_en__enable 1
+#define R_SERIAL0_CTRL__rec_bitnr__BITNR 16
+#define R_SERIAL0_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL0_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL0_CTRL__rec_bitnr__rec_7bit 1
+#define R_SERIAL0_CTRL__txd__BITNR 15
+#define R_SERIAL0_CTRL__txd__WIDTH 1
+#define R_SERIAL0_CTRL__tr_enable__BITNR 14
+#define R_SERIAL0_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL0_CTRL__tr_enable__disable 0
+#define R_SERIAL0_CTRL__tr_enable__enable 1
+#define R_SERIAL0_CTRL__auto_cts__BITNR 13
+#define R_SERIAL0_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL0_CTRL__auto_cts__disabled 0
+#define R_SERIAL0_CTRL__auto_cts__active 1
+#define R_SERIAL0_CTRL__stop_bits__BITNR 12
+#define R_SERIAL0_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL0_CTRL__stop_bits__one_bit 0
+#define R_SERIAL0_CTRL__stop_bits__two_bits 1
+#define R_SERIAL0_CTRL__tr_stick_par__BITNR 11
+#define R_SERIAL0_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL0_CTRL__tr_stick_par__normal 0
+#define R_SERIAL0_CTRL__tr_stick_par__stick 1
+#define R_SERIAL0_CTRL__tr_par__BITNR 10
+#define R_SERIAL0_CTRL__tr_par__WIDTH 1
+#define R_SERIAL0_CTRL__tr_par__even 0
+#define R_SERIAL0_CTRL__tr_par__odd 1
+#define R_SERIAL0_CTRL__tr_par_en__BITNR 9
+#define R_SERIAL0_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL0_CTRL__tr_par_en__disable 0
+#define R_SERIAL0_CTRL__tr_par_en__enable 1
+#define R_SERIAL0_CTRL__tr_bitnr__BITNR 8
+#define R_SERIAL0_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL0_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL0_CTRL__tr_bitnr__tr_7bit 1
+#define R_SERIAL0_CTRL__data_out__BITNR 0
+#define R_SERIAL0_CTRL__data_out__WIDTH 8
+
+#define R_SERIAL0_BAUD (IO_TYPECAST_BYTE 0xb0000063)
+#define R_SERIAL0_BAUD__tr_baud__BITNR 4
+#define R_SERIAL0_BAUD__tr_baud__WIDTH 4
+#define R_SERIAL0_BAUD__tr_baud__c300Hz 0
+#define R_SERIAL0_BAUD__tr_baud__c600Hz 1
+#define R_SERIAL0_BAUD__tr_baud__c1200Hz 2
+#define R_SERIAL0_BAUD__tr_baud__c2400Hz 3
+#define R_SERIAL0_BAUD__tr_baud__c4800Hz 4
+#define R_SERIAL0_BAUD__tr_baud__c9600Hz 5
+#define R_SERIAL0_BAUD__tr_baud__c19k2Hz 6
+#define R_SERIAL0_BAUD__tr_baud__c38k4Hz 7
+#define R_SERIAL0_BAUD__tr_baud__c57k6Hz 8
+#define R_SERIAL0_BAUD__tr_baud__c115k2Hz 9
+#define R_SERIAL0_BAUD__tr_baud__c230k4Hz 10
+#define R_SERIAL0_BAUD__tr_baud__c460k8Hz 11
+#define R_SERIAL0_BAUD__tr_baud__c921k6Hz 12
+#define R_SERIAL0_BAUD__tr_baud__c1843k2Hz 13
+#define R_SERIAL0_BAUD__tr_baud__c6250kHz 14
+#define R_SERIAL0_BAUD__tr_baud__reserved 15
+#define R_SERIAL0_BAUD__rec_baud__BITNR 0
+#define R_SERIAL0_BAUD__rec_baud__WIDTH 4
+#define R_SERIAL0_BAUD__rec_baud__c300Hz 0
+#define R_SERIAL0_BAUD__rec_baud__c600Hz 1
+#define R_SERIAL0_BAUD__rec_baud__c1200Hz 2
+#define R_SERIAL0_BAUD__rec_baud__c2400Hz 3
+#define R_SERIAL0_BAUD__rec_baud__c4800Hz 4
+#define R_SERIAL0_BAUD__rec_baud__c9600Hz 5
+#define R_SERIAL0_BAUD__rec_baud__c19k2Hz 6
+#define R_SERIAL0_BAUD__rec_baud__c38k4Hz 7
+#define R_SERIAL0_BAUD__rec_baud__c57k6Hz 8
+#define R_SERIAL0_BAUD__rec_baud__c115k2Hz 9
+#define R_SERIAL0_BAUD__rec_baud__c230k4Hz 10
+#define R_SERIAL0_BAUD__rec_baud__c460k8Hz 11
+#define R_SERIAL0_BAUD__rec_baud__c921k6Hz 12
+#define R_SERIAL0_BAUD__rec_baud__c1843k2Hz 13
+#define R_SERIAL0_BAUD__rec_baud__c6250kHz 14
+#define R_SERIAL0_BAUD__rec_baud__reserved 15
+
+#define R_SERIAL0_REC_CTRL (IO_TYPECAST_BYTE 0xb0000062)
+#define R_SERIAL0_REC_CTRL__dma_err__BITNR 7
+#define R_SERIAL0_REC_CTRL__dma_err__WIDTH 1
+#define R_SERIAL0_REC_CTRL__dma_err__stop 0
+#define R_SERIAL0_REC_CTRL__dma_err__ignore 1
+#define R_SERIAL0_REC_CTRL__rec_enable__BITNR 6
+#define R_SERIAL0_REC_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL0_REC_CTRL__rec_enable__disable 0
+#define R_SERIAL0_REC_CTRL__rec_enable__enable 1
+#define R_SERIAL0_REC_CTRL__rts___BITNR 5
+#define R_SERIAL0_REC_CTRL__rts___WIDTH 1
+#define R_SERIAL0_REC_CTRL__rts___active 0
+#define R_SERIAL0_REC_CTRL__rts___inactive 1
+#define R_SERIAL0_REC_CTRL__sampling__BITNR 4
+#define R_SERIAL0_REC_CTRL__sampling__WIDTH 1
+#define R_SERIAL0_REC_CTRL__sampling__middle 0
+#define R_SERIAL0_REC_CTRL__sampling__majority 1
+#define R_SERIAL0_REC_CTRL__rec_stick_par__BITNR 3
+#define R_SERIAL0_REC_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL0_REC_CTRL__rec_stick_par__normal 0
+#define R_SERIAL0_REC_CTRL__rec_stick_par__stick 1
+#define R_SERIAL0_REC_CTRL__rec_par__BITNR 2
+#define R_SERIAL0_REC_CTRL__rec_par__WIDTH 1
+#define R_SERIAL0_REC_CTRL__rec_par__even 0
+#define R_SERIAL0_REC_CTRL__rec_par__odd 1
+#define R_SERIAL0_REC_CTRL__rec_par_en__BITNR 1
+#define R_SERIAL0_REC_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL0_REC_CTRL__rec_par_en__disable 0
+#define R_SERIAL0_REC_CTRL__rec_par_en__enable 1
+#define R_SERIAL0_REC_CTRL__rec_bitnr__BITNR 0
+#define R_SERIAL0_REC_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL0_REC_CTRL__rec_bitnr__rec_7bit 1
+
+#define R_SERIAL0_TR_CTRL (IO_TYPECAST_BYTE 0xb0000061)
+#define R_SERIAL0_TR_CTRL__txd__BITNR 7
+#define R_SERIAL0_TR_CTRL__txd__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_enable__BITNR 6
+#define R_SERIAL0_TR_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_enable__disable 0
+#define R_SERIAL0_TR_CTRL__tr_enable__enable 1
+#define R_SERIAL0_TR_CTRL__auto_cts__BITNR 5
+#define R_SERIAL0_TR_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL0_TR_CTRL__auto_cts__disabled 0
+#define R_SERIAL0_TR_CTRL__auto_cts__active 1
+#define R_SERIAL0_TR_CTRL__stop_bits__BITNR 4
+#define R_SERIAL0_TR_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL0_TR_CTRL__stop_bits__one_bit 0
+#define R_SERIAL0_TR_CTRL__stop_bits__two_bits 1
+#define R_SERIAL0_TR_CTRL__tr_stick_par__BITNR 3
+#define R_SERIAL0_TR_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_stick_par__normal 0
+#define R_SERIAL0_TR_CTRL__tr_stick_par__stick 1
+#define R_SERIAL0_TR_CTRL__tr_par__BITNR 2
+#define R_SERIAL0_TR_CTRL__tr_par__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_par__even 0
+#define R_SERIAL0_TR_CTRL__tr_par__odd 1
+#define R_SERIAL0_TR_CTRL__tr_par_en__BITNR 1
+#define R_SERIAL0_TR_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_par_en__disable 0
+#define R_SERIAL0_TR_CTRL__tr_par_en__enable 1
+#define R_SERIAL0_TR_CTRL__tr_bitnr__BITNR 0
+#define R_SERIAL0_TR_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL0_TR_CTRL__tr_bitnr__tr_7bit 1
+
+#define R_SERIAL0_TR_DATA (IO_TYPECAST_BYTE 0xb0000060)
+#define R_SERIAL0_TR_DATA__data_out__BITNR 0
+#define R_SERIAL0_TR_DATA__data_out__WIDTH 8
+
+#define R_SERIAL0_READ (IO_TYPECAST_RO_UDWORD 0xb0000060)
+#define R_SERIAL0_READ__xoff_detect__BITNR 15
+#define R_SERIAL0_READ__xoff_detect__WIDTH 1
+#define R_SERIAL0_READ__xoff_detect__no_xoff 0
+#define R_SERIAL0_READ__xoff_detect__xoff 1
+#define R_SERIAL0_READ__cts___BITNR 14
+#define R_SERIAL0_READ__cts___WIDTH 1
+#define R_SERIAL0_READ__cts___active 0
+#define R_SERIAL0_READ__cts___inactive 1
+#define R_SERIAL0_READ__tr_ready__BITNR 13
+#define R_SERIAL0_READ__tr_ready__WIDTH 1
+#define R_SERIAL0_READ__tr_ready__full 0
+#define R_SERIAL0_READ__tr_ready__ready 1
+#define R_SERIAL0_READ__rxd__BITNR 12
+#define R_SERIAL0_READ__rxd__WIDTH 1
+#define R_SERIAL0_READ__overrun__BITNR 11
+#define R_SERIAL0_READ__overrun__WIDTH 1
+#define R_SERIAL0_READ__overrun__no 0
+#define R_SERIAL0_READ__overrun__yes 1
+#define R_SERIAL0_READ__par_err__BITNR 10
+#define R_SERIAL0_READ__par_err__WIDTH 1
+#define R_SERIAL0_READ__par_err__no 0
+#define R_SERIAL0_READ__par_err__yes 1
+#define R_SERIAL0_READ__framing_err__BITNR 9
+#define R_SERIAL0_READ__framing_err__WIDTH 1
+#define R_SERIAL0_READ__framing_err__no 0
+#define R_SERIAL0_READ__framing_err__yes 1
+#define R_SERIAL0_READ__data_avail__BITNR 8
+#define R_SERIAL0_READ__data_avail__WIDTH 1
+#define R_SERIAL0_READ__data_avail__no 0
+#define R_SERIAL0_READ__data_avail__yes 1
+#define R_SERIAL0_READ__data_in__BITNR 0
+#define R_SERIAL0_READ__data_in__WIDTH 8
+
+#define R_SERIAL0_STATUS (IO_TYPECAST_RO_BYTE 0xb0000061)
+#define R_SERIAL0_STATUS__xoff_detect__BITNR 7
+#define R_SERIAL0_STATUS__xoff_detect__WIDTH 1
+#define R_SERIAL0_STATUS__xoff_detect__no_xoff 0
+#define R_SERIAL0_STATUS__xoff_detect__xoff 1
+#define R_SERIAL0_STATUS__cts___BITNR 6
+#define R_SERIAL0_STATUS__cts___WIDTH 1
+#define R_SERIAL0_STATUS__cts___active 0
+#define R_SERIAL0_STATUS__cts___inactive 1
+#define R_SERIAL0_STATUS__tr_ready__BITNR 5
+#define R_SERIAL0_STATUS__tr_ready__WIDTH 1
+#define R_SERIAL0_STATUS__tr_ready__full 0
+#define R_SERIAL0_STATUS__tr_ready__ready 1
+#define R_SERIAL0_STATUS__rxd__BITNR 4
+#define R_SERIAL0_STATUS__rxd__WIDTH 1
+#define R_SERIAL0_STATUS__overrun__BITNR 3
+#define R_SERIAL0_STATUS__overrun__WIDTH 1
+#define R_SERIAL0_STATUS__overrun__no 0
+#define R_SERIAL0_STATUS__overrun__yes 1
+#define R_SERIAL0_STATUS__par_err__BITNR 2
+#define R_SERIAL0_STATUS__par_err__WIDTH 1
+#define R_SERIAL0_STATUS__par_err__no 0
+#define R_SERIAL0_STATUS__par_err__yes 1
+#define R_SERIAL0_STATUS__framing_err__BITNR 1
+#define R_SERIAL0_STATUS__framing_err__WIDTH 1
+#define R_SERIAL0_STATUS__framing_err__no 0
+#define R_SERIAL0_STATUS__framing_err__yes 1
+#define R_SERIAL0_STATUS__data_avail__BITNR 0
+#define R_SERIAL0_STATUS__data_avail__WIDTH 1
+#define R_SERIAL0_STATUS__data_avail__no 0
+#define R_SERIAL0_STATUS__data_avail__yes 1
+
+#define R_SERIAL0_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000060)
+#define R_SERIAL0_REC_DATA__data_in__BITNR 0
+#define R_SERIAL0_REC_DATA__data_in__WIDTH 8
+
+#define R_SERIAL0_XOFF (IO_TYPECAST_UDWORD 0xb0000064)
+#define R_SERIAL0_XOFF__tx_stop__BITNR 9
+#define R_SERIAL0_XOFF__tx_stop__WIDTH 1
+#define R_SERIAL0_XOFF__tx_stop__enable 0
+#define R_SERIAL0_XOFF__tx_stop__stop 1
+#define R_SERIAL0_XOFF__auto_xoff__BITNR 8
+#define R_SERIAL0_XOFF__auto_xoff__WIDTH 1
+#define R_SERIAL0_XOFF__auto_xoff__disable 0
+#define R_SERIAL0_XOFF__auto_xoff__enable 1
+#define R_SERIAL0_XOFF__xoff_char__BITNR 0
+#define R_SERIAL0_XOFF__xoff_char__WIDTH 8
+
+#define R_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068)
+#define R_SERIAL1_CTRL__tr_baud__BITNR 28
+#define R_SERIAL1_CTRL__tr_baud__WIDTH 4
+#define R_SERIAL1_CTRL__tr_baud__c300Hz 0
+#define R_SERIAL1_CTRL__tr_baud__c600Hz 1
+#define R_SERIAL1_CTRL__tr_baud__c1200Hz 2
+#define R_SERIAL1_CTRL__tr_baud__c2400Hz 3
+#define R_SERIAL1_CTRL__tr_baud__c4800Hz 4
+#define R_SERIAL1_CTRL__tr_baud__c9600Hz 5
+#define R_SERIAL1_CTRL__tr_baud__c19k2Hz 6
+#define R_SERIAL1_CTRL__tr_baud__c38k4Hz 7
+#define R_SERIAL1_CTRL__tr_baud__c57k6Hz 8
+#define R_SERIAL1_CTRL__tr_baud__c115k2Hz 9
+#define R_SERIAL1_CTRL__tr_baud__c230k4Hz 10
+#define R_SERIAL1_CTRL__tr_baud__c460k8Hz 11
+#define R_SERIAL1_CTRL__tr_baud__c921k6Hz 12
+#define R_SERIAL1_CTRL__tr_baud__c1843k2Hz 13
+#define R_SERIAL1_CTRL__tr_baud__c6250kHz 14
+#define R_SERIAL1_CTRL__tr_baud__reserved 15
+#define R_SERIAL1_CTRL__rec_baud__BITNR 24
+#define R_SERIAL1_CTRL__rec_baud__WIDTH 4
+#define R_SERIAL1_CTRL__rec_baud__c300Hz 0
+#define R_SERIAL1_CTRL__rec_baud__c600Hz 1
+#define R_SERIAL1_CTRL__rec_baud__c1200Hz 2
+#define R_SERIAL1_CTRL__rec_baud__c2400Hz 3
+#define R_SERIAL1_CTRL__rec_baud__c4800Hz 4
+#define R_SERIAL1_CTRL__rec_baud__c9600Hz 5
+#define R_SERIAL1_CTRL__rec_baud__c19k2Hz 6
+#define R_SERIAL1_CTRL__rec_baud__c38k4Hz 7
+#define R_SERIAL1_CTRL__rec_baud__c57k6Hz 8
+#define R_SERIAL1_CTRL__rec_baud__c115k2Hz 9
+#define R_SERIAL1_CTRL__rec_baud__c230k4Hz 10
+#define R_SERIAL1_CTRL__rec_baud__c460k8Hz 11
+#define R_SERIAL1_CTRL__rec_baud__c921k6Hz 12
+#define R_SERIAL1_CTRL__rec_baud__c1843k2Hz 13
+#define R_SERIAL1_CTRL__rec_baud__c6250kHz 14
+#define R_SERIAL1_CTRL__rec_baud__reserved 15
+#define R_SERIAL1_CTRL__dma_err__BITNR 23
+#define R_SERIAL1_CTRL__dma_err__WIDTH 1
+#define R_SERIAL1_CTRL__dma_err__stop 0
+#define R_SERIAL1_CTRL__dma_err__ignore 1
+#define R_SERIAL1_CTRL__rec_enable__BITNR 22
+#define R_SERIAL1_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL1_CTRL__rec_enable__disable 0
+#define R_SERIAL1_CTRL__rec_enable__enable 1
+#define R_SERIAL1_CTRL__rts___BITNR 21
+#define R_SERIAL1_CTRL__rts___WIDTH 1
+#define R_SERIAL1_CTRL__rts___active 0
+#define R_SERIAL1_CTRL__rts___inactive 1
+#define R_SERIAL1_CTRL__sampling__BITNR 20
+#define R_SERIAL1_CTRL__sampling__WIDTH 1
+#define R_SERIAL1_CTRL__sampling__middle 0
+#define R_SERIAL1_CTRL__sampling__majority 1
+#define R_SERIAL1_CTRL__rec_stick_par__BITNR 19
+#define R_SERIAL1_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL1_CTRL__rec_stick_par__normal 0
+#define R_SERIAL1_CTRL__rec_stick_par__stick 1
+#define R_SERIAL1_CTRL__rec_par__BITNR 18
+#define R_SERIAL1_CTRL__rec_par__WIDTH 1
+#define R_SERIAL1_CTRL__rec_par__even 0
+#define R_SERIAL1_CTRL__rec_par__odd 1
+#define R_SERIAL1_CTRL__rec_par_en__BITNR 17
+#define R_SERIAL1_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL1_CTRL__rec_par_en__disable 0
+#define R_SERIAL1_CTRL__rec_par_en__enable 1
+#define R_SERIAL1_CTRL__rec_bitnr__BITNR 16
+#define R_SERIAL1_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL1_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL1_CTRL__rec_bitnr__rec_7bit 1
+#define R_SERIAL1_CTRL__txd__BITNR 15
+#define R_SERIAL1_CTRL__txd__WIDTH 1
+#define R_SERIAL1_CTRL__tr_enable__BITNR 14
+#define R_SERIAL1_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL1_CTRL__tr_enable__disable 0
+#define R_SERIAL1_CTRL__tr_enable__enable 1
+#define R_SERIAL1_CTRL__auto_cts__BITNR 13
+#define R_SERIAL1_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL1_CTRL__auto_cts__disabled 0
+#define R_SERIAL1_CTRL__auto_cts__active 1
+#define R_SERIAL1_CTRL__stop_bits__BITNR 12
+#define R_SERIAL1_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL1_CTRL__stop_bits__one_bit 0
+#define R_SERIAL1_CTRL__stop_bits__two_bits 1
+#define R_SERIAL1_CTRL__tr_stick_par__BITNR 11
+#define R_SERIAL1_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL1_CTRL__tr_stick_par__normal 0
+#define R_SERIAL1_CTRL__tr_stick_par__stick 1
+#define R_SERIAL1_CTRL__tr_par__BITNR 10
+#define R_SERIAL1_CTRL__tr_par__WIDTH 1
+#define R_SERIAL1_CTRL__tr_par__even 0
+#define R_SERIAL1_CTRL__tr_par__odd 1
+#define R_SERIAL1_CTRL__tr_par_en__BITNR 9
+#define R_SERIAL1_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL1_CTRL__tr_par_en__disable 0
+#define R_SERIAL1_CTRL__tr_par_en__enable 1
+#define R_SERIAL1_CTRL__tr_bitnr__BITNR 8
+#define R_SERIAL1_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL1_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL1_CTRL__tr_bitnr__tr_7bit 1
+#define R_SERIAL1_CTRL__data_out__BITNR 0
+#define R_SERIAL1_CTRL__data_out__WIDTH 8
+
+#define R_SERIAL1_BAUD (IO_TYPECAST_BYTE 0xb000006b)
+#define R_SERIAL1_BAUD__tr_baud__BITNR 4
+#define R_SERIAL1_BAUD__tr_baud__WIDTH 4
+#define R_SERIAL1_BAUD__tr_baud__c300Hz 0
+#define R_SERIAL1_BAUD__tr_baud__c600Hz 1
+#define R_SERIAL1_BAUD__tr_baud__c1200Hz 2
+#define R_SERIAL1_BAUD__tr_baud__c2400Hz 3
+#define R_SERIAL1_BAUD__tr_baud__c4800Hz 4
+#define R_SERIAL1_BAUD__tr_baud__c9600Hz 5
+#define R_SERIAL1_BAUD__tr_baud__c19k2Hz 6
+#define R_SERIAL1_BAUD__tr_baud__c38k4Hz 7
+#define R_SERIAL1_BAUD__tr_baud__c57k6Hz 8
+#define R_SERIAL1_BAUD__tr_baud__c115k2Hz 9
+#define R_SERIAL1_BAUD__tr_baud__c230k4Hz 10
+#define R_SERIAL1_BAUD__tr_baud__c460k8Hz 11
+#define R_SERIAL1_BAUD__tr_baud__c921k6Hz 12
+#define R_SERIAL1_BAUD__tr_baud__c1843k2Hz 13
+#define R_SERIAL1_BAUD__tr_baud__c6250kHz 14
+#define R_SERIAL1_BAUD__tr_baud__reserved 15
+#define R_SERIAL1_BAUD__rec_baud__BITNR 0
+#define R_SERIAL1_BAUD__rec_baud__WIDTH 4
+#define R_SERIAL1_BAUD__rec_baud__c300Hz 0
+#define R_SERIAL1_BAUD__rec_baud__c600Hz 1
+#define R_SERIAL1_BAUD__rec_baud__c1200Hz 2
+#define R_SERIAL1_BAUD__rec_baud__c2400Hz 3
+#define R_SERIAL1_BAUD__rec_baud__c4800Hz 4
+#define R_SERIAL1_BAUD__rec_baud__c9600Hz 5
+#define R_SERIAL1_BAUD__rec_baud__c19k2Hz 6
+#define R_SERIAL1_BAUD__rec_baud__c38k4Hz 7
+#define R_SERIAL1_BAUD__rec_baud__c57k6Hz 8
+#define R_SERIAL1_BAUD__rec_baud__c115k2Hz 9
+#define R_SERIAL1_BAUD__rec_baud__c230k4Hz 10
+#define R_SERIAL1_BAUD__rec_baud__c460k8Hz 11
+#define R_SERIAL1_BAUD__rec_baud__c921k6Hz 12
+#define R_SERIAL1_BAUD__rec_baud__c1843k2Hz 13
+#define R_SERIAL1_BAUD__rec_baud__c6250kHz 14
+#define R_SERIAL1_BAUD__rec_baud__reserved 15
+
+#define R_SERIAL1_REC_CTRL (IO_TYPECAST_BYTE 0xb000006a)
+#define R_SERIAL1_REC_CTRL__dma_err__BITNR 7
+#define R_SERIAL1_REC_CTRL__dma_err__WIDTH 1
+#define R_SERIAL1_REC_CTRL__dma_err__stop 0
+#define R_SERIAL1_REC_CTRL__dma_err__ignore 1
+#define R_SERIAL1_REC_CTRL__rec_enable__BITNR 6
+#define R_SERIAL1_REC_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL1_REC_CTRL__rec_enable__disable 0
+#define R_SERIAL1_REC_CTRL__rec_enable__enable 1
+#define R_SERIAL1_REC_CTRL__rts___BITNR 5
+#define R_SERIAL1_REC_CTRL__rts___WIDTH 1
+#define R_SERIAL1_REC_CTRL__rts___active 0
+#define R_SERIAL1_REC_CTRL__rts___inactive 1
+#define R_SERIAL1_REC_CTRL__sampling__BITNR 4
+#define R_SERIAL1_REC_CTRL__sampling__WIDTH 1
+#define R_SERIAL1_REC_CTRL__sampling__middle 0
+#define R_SERIAL1_REC_CTRL__sampling__majority 1
+#define R_SERIAL1_REC_CTRL__rec_stick_par__BITNR 3
+#define R_SERIAL1_REC_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL1_REC_CTRL__rec_stick_par__normal 0
+#define R_SERIAL1_REC_CTRL__rec_stick_par__stick 1
+#define R_SERIAL1_REC_CTRL__rec_par__BITNR 2
+#define R_SERIAL1_REC_CTRL__rec_par__WIDTH 1
+#define R_SERIAL1_REC_CTRL__rec_par__even 0
+#define R_SERIAL1_REC_CTRL__rec_par__odd 1
+#define R_SERIAL1_REC_CTRL__rec_par_en__BITNR 1
+#define R_SERIAL1_REC_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL1_REC_CTRL__rec_par_en__disable 0
+#define R_SERIAL1_REC_CTRL__rec_par_en__enable 1
+#define R_SERIAL1_REC_CTRL__rec_bitnr__BITNR 0
+#define R_SERIAL1_REC_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL1_REC_CTRL__rec_bitnr__rec_7bit 1
+
+#define R_SERIAL1_TR_CTRL (IO_TYPECAST_BYTE 0xb0000069)
+#define R_SERIAL1_TR_CTRL__txd__BITNR 7
+#define R_SERIAL1_TR_CTRL__txd__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_enable__BITNR 6
+#define R_SERIAL1_TR_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_enable__disable 0
+#define R_SERIAL1_TR_CTRL__tr_enable__enable 1
+#define R_SERIAL1_TR_CTRL__auto_cts__BITNR 5
+#define R_SERIAL1_TR_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL1_TR_CTRL__auto_cts__disabled 0
+#define R_SERIAL1_TR_CTRL__auto_cts__active 1
+#define R_SERIAL1_TR_CTRL__stop_bits__BITNR 4
+#define R_SERIAL1_TR_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL1_TR_CTRL__stop_bits__one_bit 0
+#define R_SERIAL1_TR_CTRL__stop_bits__two_bits 1
+#define R_SERIAL1_TR_CTRL__tr_stick_par__BITNR 3
+#define R_SERIAL1_TR_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_stick_par__normal 0
+#define R_SERIAL1_TR_CTRL__tr_stick_par__stick 1
+#define R_SERIAL1_TR_CTRL__tr_par__BITNR 2
+#define R_SERIAL1_TR_CTRL__tr_par__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_par__even 0
+#define R_SERIAL1_TR_CTRL__tr_par__odd 1
+#define R_SERIAL1_TR_CTRL__tr_par_en__BITNR 1
+#define R_SERIAL1_TR_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_par_en__disable 0
+#define R_SERIAL1_TR_CTRL__tr_par_en__enable 1
+#define R_SERIAL1_TR_CTRL__tr_bitnr__BITNR 0
+#define R_SERIAL1_TR_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL1_TR_CTRL__tr_bitnr__tr_7bit 1
+
+#define R_SERIAL1_TR_DATA (IO_TYPECAST_BYTE 0xb0000068)
+#define R_SERIAL1_TR_DATA__data_out__BITNR 0
+#define R_SERIAL1_TR_DATA__data_out__WIDTH 8
+
+#define R_SERIAL1_READ (IO_TYPECAST_RO_UDWORD 0xb0000068)
+#define R_SERIAL1_READ__xoff_detect__BITNR 15
+#define R_SERIAL1_READ__xoff_detect__WIDTH 1
+#define R_SERIAL1_READ__xoff_detect__no_xoff 0
+#define R_SERIAL1_READ__xoff_detect__xoff 1
+#define R_SERIAL1_READ__cts___BITNR 14
+#define R_SERIAL1_READ__cts___WIDTH 1
+#define R_SERIAL1_READ__cts___active 0
+#define R_SERIAL1_READ__cts___inactive 1
+#define R_SERIAL1_READ__tr_ready__BITNR 13
+#define R_SERIAL1_READ__tr_ready__WIDTH 1
+#define R_SERIAL1_READ__tr_ready__full 0
+#define R_SERIAL1_READ__tr_ready__ready 1
+#define R_SERIAL1_READ__rxd__BITNR 12
+#define R_SERIAL1_READ__rxd__WIDTH 1
+#define R_SERIAL1_READ__overrun__BITNR 11
+#define R_SERIAL1_READ__overrun__WIDTH 1
+#define R_SERIAL1_READ__overrun__no 0
+#define R_SERIAL1_READ__overrun__yes 1
+#define R_SERIAL1_READ__par_err__BITNR 10
+#define R_SERIAL1_READ__par_err__WIDTH 1
+#define R_SERIAL1_READ__par_err__no 0
+#define R_SERIAL1_READ__par_err__yes 1
+#define R_SERIAL1_READ__framing_err__BITNR 9
+#define R_SERIAL1_READ__framing_err__WIDTH 1
+#define R_SERIAL1_READ__framing_err__no 0
+#define R_SERIAL1_READ__framing_err__yes 1
+#define R_SERIAL1_READ__data_avail__BITNR 8
+#define R_SERIAL1_READ__data_avail__WIDTH 1
+#define R_SERIAL1_READ__data_avail__no 0
+#define R_SERIAL1_READ__data_avail__yes 1
+#define R_SERIAL1_READ__data_in__BITNR 0
+#define R_SERIAL1_READ__data_in__WIDTH 8
+
+#define R_SERIAL1_STATUS (IO_TYPECAST_RO_BYTE 0xb0000069)
+#define R_SERIAL1_STATUS__xoff_detect__BITNR 7
+#define R_SERIAL1_STATUS__xoff_detect__WIDTH 1
+#define R_SERIAL1_STATUS__xoff_detect__no_xoff 0
+#define R_SERIAL1_STATUS__xoff_detect__xoff 1
+#define R_SERIAL1_STATUS__cts___BITNR 6
+#define R_SERIAL1_STATUS__cts___WIDTH 1
+#define R_SERIAL1_STATUS__cts___active 0
+#define R_SERIAL1_STATUS__cts___inactive 1
+#define R_SERIAL1_STATUS__tr_ready__BITNR 5
+#define R_SERIAL1_STATUS__tr_ready__WIDTH 1
+#define R_SERIAL1_STATUS__tr_ready__full 0
+#define R_SERIAL1_STATUS__tr_ready__ready 1
+#define R_SERIAL1_STATUS__rxd__BITNR 4
+#define R_SERIAL1_STATUS__rxd__WIDTH 1
+#define R_SERIAL1_STATUS__overrun__BITNR 3
+#define R_SERIAL1_STATUS__overrun__WIDTH 1
+#define R_SERIAL1_STATUS__overrun__no 0
+#define R_SERIAL1_STATUS__overrun__yes 1
+#define R_SERIAL1_STATUS__par_err__BITNR 2
+#define R_SERIAL1_STATUS__par_err__WIDTH 1
+#define R_SERIAL1_STATUS__par_err__no 0
+#define R_SERIAL1_STATUS__par_err__yes 1
+#define R_SERIAL1_STATUS__framing_err__BITNR 1
+#define R_SERIAL1_STATUS__framing_err__WIDTH 1
+#define R_SERIAL1_STATUS__framing_err__no 0
+#define R_SERIAL1_STATUS__framing_err__yes 1
+#define R_SERIAL1_STATUS__data_avail__BITNR 0
+#define R_SERIAL1_STATUS__data_avail__WIDTH 1
+#define R_SERIAL1_STATUS__data_avail__no 0
+#define R_SERIAL1_STATUS__data_avail__yes 1
+
+#define R_SERIAL1_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000068)
+#define R_SERIAL1_REC_DATA__data_in__BITNR 0
+#define R_SERIAL1_REC_DATA__data_in__WIDTH 8
+
+#define R_SERIAL1_XOFF (IO_TYPECAST_UDWORD 0xb000006c)
+#define R_SERIAL1_XOFF__tx_stop__BITNR 9
+#define R_SERIAL1_XOFF__tx_stop__WIDTH 1
+#define R_SERIAL1_XOFF__tx_stop__enable 0
+#define R_SERIAL1_XOFF__tx_stop__stop 1
+#define R_SERIAL1_XOFF__auto_xoff__BITNR 8
+#define R_SERIAL1_XOFF__auto_xoff__WIDTH 1
+#define R_SERIAL1_XOFF__auto_xoff__disable 0
+#define R_SERIAL1_XOFF__auto_xoff__enable 1
+#define R_SERIAL1_XOFF__xoff_char__BITNR 0
+#define R_SERIAL1_XOFF__xoff_char__WIDTH 8
+
+#define R_SERIAL2_CTRL (IO_TYPECAST_UDWORD 0xb0000070)
+#define R_SERIAL2_CTRL__tr_baud__BITNR 28
+#define R_SERIAL2_CTRL__tr_baud__WIDTH 4
+#define R_SERIAL2_CTRL__tr_baud__c300Hz 0
+#define R_SERIAL2_CTRL__tr_baud__c600Hz 1
+#define R_SERIAL2_CTRL__tr_baud__c1200Hz 2
+#define R_SERIAL2_CTRL__tr_baud__c2400Hz 3
+#define R_SERIAL2_CTRL__tr_baud__c4800Hz 4
+#define R_SERIAL2_CTRL__tr_baud__c9600Hz 5
+#define R_SERIAL2_CTRL__tr_baud__c19k2Hz 6
+#define R_SERIAL2_CTRL__tr_baud__c38k4Hz 7
+#define R_SERIAL2_CTRL__tr_baud__c57k6Hz 8
+#define R_SERIAL2_CTRL__tr_baud__c115k2Hz 9
+#define R_SERIAL2_CTRL__tr_baud__c230k4Hz 10
+#define R_SERIAL2_CTRL__tr_baud__c460k8Hz 11
+#define R_SERIAL2_CTRL__tr_baud__c921k6Hz 12
+#define R_SERIAL2_CTRL__tr_baud__c1843k2Hz 13
+#define R_SERIAL2_CTRL__tr_baud__c6250kHz 14
+#define R_SERIAL2_CTRL__tr_baud__reserved 15
+#define R_SERIAL2_CTRL__rec_baud__BITNR 24
+#define R_SERIAL2_CTRL__rec_baud__WIDTH 4
+#define R_SERIAL2_CTRL__rec_baud__c300Hz 0
+#define R_SERIAL2_CTRL__rec_baud__c600Hz 1
+#define R_SERIAL2_CTRL__rec_baud__c1200Hz 2
+#define R_SERIAL2_CTRL__rec_baud__c2400Hz 3
+#define R_SERIAL2_CTRL__rec_baud__c4800Hz 4
+#define R_SERIAL2_CTRL__rec_baud__c9600Hz 5
+#define R_SERIAL2_CTRL__rec_baud__c19k2Hz 6
+#define R_SERIAL2_CTRL__rec_baud__c38k4Hz 7
+#define R_SERIAL2_CTRL__rec_baud__c57k6Hz 8
+#define R_SERIAL2_CTRL__rec_baud__c115k2Hz 9
+#define R_SERIAL2_CTRL__rec_baud__c230k4Hz 10
+#define R_SERIAL2_CTRL__rec_baud__c460k8Hz 11
+#define R_SERIAL2_CTRL__rec_baud__c921k6Hz 12
+#define R_SERIAL2_CTRL__rec_baud__c1843k2Hz 13
+#define R_SERIAL2_CTRL__rec_baud__c6250kHz 14
+#define R_SERIAL2_CTRL__rec_baud__reserved 15
+#define R_SERIAL2_CTRL__dma_err__BITNR 23
+#define R_SERIAL2_CTRL__dma_err__WIDTH 1
+#define R_SERIAL2_CTRL__dma_err__stop 0
+#define R_SERIAL2_CTRL__dma_err__ignore 1
+#define R_SERIAL2_CTRL__rec_enable__BITNR 22
+#define R_SERIAL2_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL2_CTRL__rec_enable__disable 0
+#define R_SERIAL2_CTRL__rec_enable__enable 1
+#define R_SERIAL2_CTRL__rts___BITNR 21
+#define R_SERIAL2_CTRL__rts___WIDTH 1
+#define R_SERIAL2_CTRL__rts___active 0
+#define R_SERIAL2_CTRL__rts___inactive 1
+#define R_SERIAL2_CTRL__sampling__BITNR 20
+#define R_SERIAL2_CTRL__sampling__WIDTH 1
+#define R_SERIAL2_CTRL__sampling__middle 0
+#define R_SERIAL2_CTRL__sampling__majority 1
+#define R_SERIAL2_CTRL__rec_stick_par__BITNR 19
+#define R_SERIAL2_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL2_CTRL__rec_stick_par__normal 0
+#define R_SERIAL2_CTRL__rec_stick_par__stick 1
+#define R_SERIAL2_CTRL__rec_par__BITNR 18
+#define R_SERIAL2_CTRL__rec_par__WIDTH 1
+#define R_SERIAL2_CTRL__rec_par__even 0
+#define R_SERIAL2_CTRL__rec_par__odd 1
+#define R_SERIAL2_CTRL__rec_par_en__BITNR 17
+#define R_SERIAL2_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL2_CTRL__rec_par_en__disable 0
+#define R_SERIAL2_CTRL__rec_par_en__enable 1
+#define R_SERIAL2_CTRL__rec_bitnr__BITNR 16
+#define R_SERIAL2_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL2_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL2_CTRL__rec_bitnr__rec_7bit 1
+#define R_SERIAL2_CTRL__txd__BITNR 15
+#define R_SERIAL2_CTRL__txd__WIDTH 1
+#define R_SERIAL2_CTRL__tr_enable__BITNR 14
+#define R_SERIAL2_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL2_CTRL__tr_enable__disable 0
+#define R_SERIAL2_CTRL__tr_enable__enable 1
+#define R_SERIAL2_CTRL__auto_cts__BITNR 13
+#define R_SERIAL2_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL2_CTRL__auto_cts__disabled 0
+#define R_SERIAL2_CTRL__auto_cts__active 1
+#define R_SERIAL2_CTRL__stop_bits__BITNR 12
+#define R_SERIAL2_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL2_CTRL__stop_bits__one_bit 0
+#define R_SERIAL2_CTRL__stop_bits__two_bits 1
+#define R_SERIAL2_CTRL__tr_stick_par__BITNR 11
+#define R_SERIAL2_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL2_CTRL__tr_stick_par__normal 0
+#define R_SERIAL2_CTRL__tr_stick_par__stick 1
+#define R_SERIAL2_CTRL__tr_par__BITNR 10
+#define R_SERIAL2_CTRL__tr_par__WIDTH 1
+#define R_SERIAL2_CTRL__tr_par__even 0
+#define R_SERIAL2_CTRL__tr_par__odd 1
+#define R_SERIAL2_CTRL__tr_par_en__BITNR 9
+#define R_SERIAL2_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL2_CTRL__tr_par_en__disable 0
+#define R_SERIAL2_CTRL__tr_par_en__enable 1
+#define R_SERIAL2_CTRL__tr_bitnr__BITNR 8
+#define R_SERIAL2_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL2_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL2_CTRL__tr_bitnr__tr_7bit 1
+#define R_SERIAL2_CTRL__data_out__BITNR 0
+#define R_SERIAL2_CTRL__data_out__WIDTH 8
+
+#define R_SERIAL2_BAUD (IO_TYPECAST_BYTE 0xb0000073)
+#define R_SERIAL2_BAUD__tr_baud__BITNR 4
+#define R_SERIAL2_BAUD__tr_baud__WIDTH 4
+#define R_SERIAL2_BAUD__tr_baud__c300Hz 0
+#define R_SERIAL2_BAUD__tr_baud__c600Hz 1
+#define R_SERIAL2_BAUD__tr_baud__c1200Hz 2
+#define R_SERIAL2_BAUD__tr_baud__c2400Hz 3
+#define R_SERIAL2_BAUD__tr_baud__c4800Hz 4
+#define R_SERIAL2_BAUD__tr_baud__c9600Hz 5
+#define R_SERIAL2_BAUD__tr_baud__c19k2Hz 6
+#define R_SERIAL2_BAUD__tr_baud__c38k4Hz 7
+#define R_SERIAL2_BAUD__tr_baud__c57k6Hz 8
+#define R_SERIAL2_BAUD__tr_baud__c115k2Hz 9
+#define R_SERIAL2_BAUD__tr_baud__c230k4Hz 10
+#define R_SERIAL2_BAUD__tr_baud__c460k8Hz 11
+#define R_SERIAL2_BAUD__tr_baud__c921k6Hz 12
+#define R_SERIAL2_BAUD__tr_baud__c1843k2Hz 13
+#define R_SERIAL2_BAUD__tr_baud__c6250kHz 14
+#define R_SERIAL2_BAUD__tr_baud__reserved 15
+#define R_SERIAL2_BAUD__rec_baud__BITNR 0
+#define R_SERIAL2_BAUD__rec_baud__WIDTH 4
+#define R_SERIAL2_BAUD__rec_baud__c300Hz 0
+#define R_SERIAL2_BAUD__rec_baud__c600Hz 1
+#define R_SERIAL2_BAUD__rec_baud__c1200Hz 2
+#define R_SERIAL2_BAUD__rec_baud__c2400Hz 3
+#define R_SERIAL2_BAUD__rec_baud__c4800Hz 4
+#define R_SERIAL2_BAUD__rec_baud__c9600Hz 5
+#define R_SERIAL2_BAUD__rec_baud__c19k2Hz 6
+#define R_SERIAL2_BAUD__rec_baud__c38k4Hz 7
+#define R_SERIAL2_BAUD__rec_baud__c57k6Hz 8
+#define R_SERIAL2_BAUD__rec_baud__c115k2Hz 9
+#define R_SERIAL2_BAUD__rec_baud__c230k4Hz 10
+#define R_SERIAL2_BAUD__rec_baud__c460k8Hz 11
+#define R_SERIAL2_BAUD__rec_baud__c921k6Hz 12
+#define R_SERIAL2_BAUD__rec_baud__c1843k2Hz 13
+#define R_SERIAL2_BAUD__rec_baud__c6250kHz 14
+#define R_SERIAL2_BAUD__rec_baud__reserved 15
+
+#define R_SERIAL2_REC_CTRL (IO_TYPECAST_BYTE 0xb0000072)
+#define R_SERIAL2_REC_CTRL__dma_err__BITNR 7
+#define R_SERIAL2_REC_CTRL__dma_err__WIDTH 1
+#define R_SERIAL2_REC_CTRL__dma_err__stop 0
+#define R_SERIAL2_REC_CTRL__dma_err__ignore 1
+#define R_SERIAL2_REC_CTRL__rec_enable__BITNR 6
+#define R_SERIAL2_REC_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL2_REC_CTRL__rec_enable__disable 0
+#define R_SERIAL2_REC_CTRL__rec_enable__enable 1
+#define R_SERIAL2_REC_CTRL__rts___BITNR 5
+#define R_SERIAL2_REC_CTRL__rts___WIDTH 1
+#define R_SERIAL2_REC_CTRL__rts___active 0
+#define R_SERIAL2_REC_CTRL__rts___inactive 1
+#define R_SERIAL2_REC_CTRL__sampling__BITNR 4
+#define R_SERIAL2_REC_CTRL__sampling__WIDTH 1
+#define R_SERIAL2_REC_CTRL__sampling__middle 0
+#define R_SERIAL2_REC_CTRL__sampling__majority 1
+#define R_SERIAL2_REC_CTRL__rec_stick_par__BITNR 3
+#define R_SERIAL2_REC_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL2_REC_CTRL__rec_stick_par__normal 0
+#define R_SERIAL2_REC_CTRL__rec_stick_par__stick 1
+#define R_SERIAL2_REC_CTRL__rec_par__BITNR 2
+#define R_SERIAL2_REC_CTRL__rec_par__WIDTH 1
+#define R_SERIAL2_REC_CTRL__rec_par__even 0
+#define R_SERIAL2_REC_CTRL__rec_par__odd 1
+#define R_SERIAL2_REC_CTRL__rec_par_en__BITNR 1
+#define R_SERIAL2_REC_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL2_REC_CTRL__rec_par_en__disable 0
+#define R_SERIAL2_REC_CTRL__rec_par_en__enable 1
+#define R_SERIAL2_REC_CTRL__rec_bitnr__BITNR 0
+#define R_SERIAL2_REC_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL2_REC_CTRL__rec_bitnr__rec_7bit 1
+
+#define R_SERIAL2_TR_CTRL (IO_TYPECAST_BYTE 0xb0000071)
+#define R_SERIAL2_TR_CTRL__txd__BITNR 7
+#define R_SERIAL2_TR_CTRL__txd__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_enable__BITNR 6
+#define R_SERIAL2_TR_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_enable__disable 0
+#define R_SERIAL2_TR_CTRL__tr_enable__enable 1
+#define R_SERIAL2_TR_CTRL__auto_cts__BITNR 5
+#define R_SERIAL2_TR_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL2_TR_CTRL__auto_cts__disabled 0
+#define R_SERIAL2_TR_CTRL__auto_cts__active 1
+#define R_SERIAL2_TR_CTRL__stop_bits__BITNR 4
+#define R_SERIAL2_TR_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL2_TR_CTRL__stop_bits__one_bit 0
+#define R_SERIAL2_TR_CTRL__stop_bits__two_bits 1
+#define R_SERIAL2_TR_CTRL__tr_stick_par__BITNR 3
+#define R_SERIAL2_TR_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_stick_par__normal 0
+#define R_SERIAL2_TR_CTRL__tr_stick_par__stick 1
+#define R_SERIAL2_TR_CTRL__tr_par__BITNR 2
+#define R_SERIAL2_TR_CTRL__tr_par__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_par__even 0
+#define R_SERIAL2_TR_CTRL__tr_par__odd 1
+#define R_SERIAL2_TR_CTRL__tr_par_en__BITNR 1
+#define R_SERIAL2_TR_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_par_en__disable 0
+#define R_SERIAL2_TR_CTRL__tr_par_en__enable 1
+#define R_SERIAL2_TR_CTRL__tr_bitnr__BITNR 0
+#define R_SERIAL2_TR_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL2_TR_CTRL__tr_bitnr__tr_7bit 1
+
+#define R_SERIAL2_TR_DATA (IO_TYPECAST_BYTE 0xb0000070)
+#define R_SERIAL2_TR_DATA__data_out__BITNR 0
+#define R_SERIAL2_TR_DATA__data_out__WIDTH 8
+
+#define R_SERIAL2_READ (IO_TYPECAST_RO_UDWORD 0xb0000070)
+#define R_SERIAL2_READ__xoff_detect__BITNR 15
+#define R_SERIAL2_READ__xoff_detect__WIDTH 1
+#define R_SERIAL2_READ__xoff_detect__no_xoff 0
+#define R_SERIAL2_READ__xoff_detect__xoff 1
+#define R_SERIAL2_READ__cts___BITNR 14
+#define R_SERIAL2_READ__cts___WIDTH 1
+#define R_SERIAL2_READ__cts___active 0
+#define R_SERIAL2_READ__cts___inactive 1
+#define R_SERIAL2_READ__tr_ready__BITNR 13
+#define R_SERIAL2_READ__tr_ready__WIDTH 1
+#define R_SERIAL2_READ__tr_ready__full 0
+#define R_SERIAL2_READ__tr_ready__ready 1
+#define R_SERIAL2_READ__rxd__BITNR 12
+#define R_SERIAL2_READ__rxd__WIDTH 1
+#define R_SERIAL2_READ__overrun__BITNR 11
+#define R_SERIAL2_READ__overrun__WIDTH 1
+#define R_SERIAL2_READ__overrun__no 0
+#define R_SERIAL2_READ__overrun__yes 1
+#define R_SERIAL2_READ__par_err__BITNR 10
+#define R_SERIAL2_READ__par_err__WIDTH 1
+#define R_SERIAL2_READ__par_err__no 0
+#define R_SERIAL2_READ__par_err__yes 1
+#define R_SERIAL2_READ__framing_err__BITNR 9
+#define R_SERIAL2_READ__framing_err__WIDTH 1
+#define R_SERIAL2_READ__framing_err__no 0
+#define R_SERIAL2_READ__framing_err__yes 1
+#define R_SERIAL2_READ__data_avail__BITNR 8
+#define R_SERIAL2_READ__data_avail__WIDTH 1
+#define R_SERIAL2_READ__data_avail__no 0
+#define R_SERIAL2_READ__data_avail__yes 1
+#define R_SERIAL2_READ__data_in__BITNR 0
+#define R_SERIAL2_READ__data_in__WIDTH 8
+
+#define R_SERIAL2_STATUS (IO_TYPECAST_RO_BYTE 0xb0000071)
+#define R_SERIAL2_STATUS__xoff_detect__BITNR 7
+#define R_SERIAL2_STATUS__xoff_detect__WIDTH 1
+#define R_SERIAL2_STATUS__xoff_detect__no_xoff 0
+#define R_SERIAL2_STATUS__xoff_detect__xoff 1
+#define R_SERIAL2_STATUS__cts___BITNR 6
+#define R_SERIAL2_STATUS__cts___WIDTH 1
+#define R_SERIAL2_STATUS__cts___active 0
+#define R_SERIAL2_STATUS__cts___inactive 1
+#define R_SERIAL2_STATUS__tr_ready__BITNR 5
+#define R_SERIAL2_STATUS__tr_ready__WIDTH 1
+#define R_SERIAL2_STATUS__tr_ready__full 0
+#define R_SERIAL2_STATUS__tr_ready__ready 1
+#define R_SERIAL2_STATUS__rxd__BITNR 4
+#define R_SERIAL2_STATUS__rxd__WIDTH 1
+#define R_SERIAL2_STATUS__overrun__BITNR 3
+#define R_SERIAL2_STATUS__overrun__WIDTH 1
+#define R_SERIAL2_STATUS__overrun__no 0
+#define R_SERIAL2_STATUS__overrun__yes 1
+#define R_SERIAL2_STATUS__par_err__BITNR 2
+#define R_SERIAL2_STATUS__par_err__WIDTH 1
+#define R_SERIAL2_STATUS__par_err__no 0
+#define R_SERIAL2_STATUS__par_err__yes 1
+#define R_SERIAL2_STATUS__framing_err__BITNR 1
+#define R_SERIAL2_STATUS__framing_err__WIDTH 1
+#define R_SERIAL2_STATUS__framing_err__no 0
+#define R_SERIAL2_STATUS__framing_err__yes 1
+#define R_SERIAL2_STATUS__data_avail__BITNR 0
+#define R_SERIAL2_STATUS__data_avail__WIDTH 1
+#define R_SERIAL2_STATUS__data_avail__no 0
+#define R_SERIAL2_STATUS__data_avail__yes 1
+
+#define R_SERIAL2_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000070)
+#define R_SERIAL2_REC_DATA__data_in__BITNR 0
+#define R_SERIAL2_REC_DATA__data_in__WIDTH 8
+
+#define R_SERIAL2_XOFF (IO_TYPECAST_UDWORD 0xb0000074)
+#define R_SERIAL2_XOFF__tx_stop__BITNR 9
+#define R_SERIAL2_XOFF__tx_stop__WIDTH 1
+#define R_SERIAL2_XOFF__tx_stop__enable 0
+#define R_SERIAL2_XOFF__tx_stop__stop 1
+#define R_SERIAL2_XOFF__auto_xoff__BITNR 8
+#define R_SERIAL2_XOFF__auto_xoff__WIDTH 1
+#define R_SERIAL2_XOFF__auto_xoff__disable 0
+#define R_SERIAL2_XOFF__auto_xoff__enable 1
+#define R_SERIAL2_XOFF__xoff_char__BITNR 0
+#define R_SERIAL2_XOFF__xoff_char__WIDTH 8
+
+#define R_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078)
+#define R_SERIAL3_CTRL__tr_baud__BITNR 28
+#define R_SERIAL3_CTRL__tr_baud__WIDTH 4
+#define R_SERIAL3_CTRL__tr_baud__c300Hz 0
+#define R_SERIAL3_CTRL__tr_baud__c600Hz 1
+#define R_SERIAL3_CTRL__tr_baud__c1200Hz 2
+#define R_SERIAL3_CTRL__tr_baud__c2400Hz 3
+#define R_SERIAL3_CTRL__tr_baud__c4800Hz 4
+#define R_SERIAL3_CTRL__tr_baud__c9600Hz 5
+#define R_SERIAL3_CTRL__tr_baud__c19k2Hz 6
+#define R_SERIAL3_CTRL__tr_baud__c38k4Hz 7
+#define R_SERIAL3_CTRL__tr_baud__c57k6Hz 8
+#define R_SERIAL3_CTRL__tr_baud__c115k2Hz 9
+#define R_SERIAL3_CTRL__tr_baud__c230k4Hz 10
+#define R_SERIAL3_CTRL__tr_baud__c460k8Hz 11
+#define R_SERIAL3_CTRL__tr_baud__c921k6Hz 12
+#define R_SERIAL3_CTRL__tr_baud__c1843k2Hz 13
+#define R_SERIAL3_CTRL__tr_baud__c6250kHz 14
+#define R_SERIAL3_CTRL__tr_baud__reserved 15
+#define R_SERIAL3_CTRL__rec_baud__BITNR 24
+#define R_SERIAL3_CTRL__rec_baud__WIDTH 4
+#define R_SERIAL3_CTRL__rec_baud__c300Hz 0
+#define R_SERIAL3_CTRL__rec_baud__c600Hz 1
+#define R_SERIAL3_CTRL__rec_baud__c1200Hz 2
+#define R_SERIAL3_CTRL__rec_baud__c2400Hz 3
+#define R_SERIAL3_CTRL__rec_baud__c4800Hz 4
+#define R_SERIAL3_CTRL__rec_baud__c9600Hz 5
+#define R_SERIAL3_CTRL__rec_baud__c19k2Hz 6
+#define R_SERIAL3_CTRL__rec_baud__c38k4Hz 7
+#define R_SERIAL3_CTRL__rec_baud__c57k6Hz 8
+#define R_SERIAL3_CTRL__rec_baud__c115k2Hz 9
+#define R_SERIAL3_CTRL__rec_baud__c230k4Hz 10
+#define R_SERIAL3_CTRL__rec_baud__c460k8Hz 11
+#define R_SERIAL3_CTRL__rec_baud__c921k6Hz 12
+#define R_SERIAL3_CTRL__rec_baud__c1843k2Hz 13
+#define R_SERIAL3_CTRL__rec_baud__c6250kHz 14
+#define R_SERIAL3_CTRL__rec_baud__reserved 15
+#define R_SERIAL3_CTRL__dma_err__BITNR 23
+#define R_SERIAL3_CTRL__dma_err__WIDTH 1
+#define R_SERIAL3_CTRL__dma_err__stop 0
+#define R_SERIAL3_CTRL__dma_err__ignore 1
+#define R_SERIAL3_CTRL__rec_enable__BITNR 22
+#define R_SERIAL3_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL3_CTRL__rec_enable__disable 0
+#define R_SERIAL3_CTRL__rec_enable__enable 1
+#define R_SERIAL3_CTRL__rts___BITNR 21
+#define R_SERIAL3_CTRL__rts___WIDTH 1
+#define R_SERIAL3_CTRL__rts___active 0
+#define R_SERIAL3_CTRL__rts___inactive 1
+#define R_SERIAL3_CTRL__sampling__BITNR 20
+#define R_SERIAL3_CTRL__sampling__WIDTH 1
+#define R_SERIAL3_CTRL__sampling__middle 0
+#define R_SERIAL3_CTRL__sampling__majority 1
+#define R_SERIAL3_CTRL__rec_stick_par__BITNR 19
+#define R_SERIAL3_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL3_CTRL__rec_stick_par__normal 0
+#define R_SERIAL3_CTRL__rec_stick_par__stick 1
+#define R_SERIAL3_CTRL__rec_par__BITNR 18
+#define R_SERIAL3_CTRL__rec_par__WIDTH 1
+#define R_SERIAL3_CTRL__rec_par__even 0
+#define R_SERIAL3_CTRL__rec_par__odd 1
+#define R_SERIAL3_CTRL__rec_par_en__BITNR 17
+#define R_SERIAL3_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL3_CTRL__rec_par_en__disable 0
+#define R_SERIAL3_CTRL__rec_par_en__enable 1
+#define R_SERIAL3_CTRL__rec_bitnr__BITNR 16
+#define R_SERIAL3_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL3_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL3_CTRL__rec_bitnr__rec_7bit 1
+#define R_SERIAL3_CTRL__txd__BITNR 15
+#define R_SERIAL3_CTRL__txd__WIDTH 1
+#define R_SERIAL3_CTRL__tr_enable__BITNR 14
+#define R_SERIAL3_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL3_CTRL__tr_enable__disable 0
+#define R_SERIAL3_CTRL__tr_enable__enable 1
+#define R_SERIAL3_CTRL__auto_cts__BITNR 13
+#define R_SERIAL3_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL3_CTRL__auto_cts__disabled 0
+#define R_SERIAL3_CTRL__auto_cts__active 1
+#define R_SERIAL3_CTRL__stop_bits__BITNR 12
+#define R_SERIAL3_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL3_CTRL__stop_bits__one_bit 0
+#define R_SERIAL3_CTRL__stop_bits__two_bits 1
+#define R_SERIAL3_CTRL__tr_stick_par__BITNR 11
+#define R_SERIAL3_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL3_CTRL__tr_stick_par__normal 0
+#define R_SERIAL3_CTRL__tr_stick_par__stick 1
+#define R_SERIAL3_CTRL__tr_par__BITNR 10
+#define R_SERIAL3_CTRL__tr_par__WIDTH 1
+#define R_SERIAL3_CTRL__tr_par__even 0
+#define R_SERIAL3_CTRL__tr_par__odd 1
+#define R_SERIAL3_CTRL__tr_par_en__BITNR 9
+#define R_SERIAL3_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL3_CTRL__tr_par_en__disable 0
+#define R_SERIAL3_CTRL__tr_par_en__enable 1
+#define R_SERIAL3_CTRL__tr_bitnr__BITNR 8
+#define R_SERIAL3_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL3_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL3_CTRL__tr_bitnr__tr_7bit 1
+#define R_SERIAL3_CTRL__data_out__BITNR 0
+#define R_SERIAL3_CTRL__data_out__WIDTH 8
+
+#define R_SERIAL3_BAUD (IO_TYPECAST_BYTE 0xb000007b)
+#define R_SERIAL3_BAUD__tr_baud__BITNR 4
+#define R_SERIAL3_BAUD__tr_baud__WIDTH 4
+#define R_SERIAL3_BAUD__tr_baud__c300Hz 0
+#define R_SERIAL3_BAUD__tr_baud__c600Hz 1
+#define R_SERIAL3_BAUD__tr_baud__c1200Hz 2
+#define R_SERIAL3_BAUD__tr_baud__c2400Hz 3
+#define R_SERIAL3_BAUD__tr_baud__c4800Hz 4
+#define R_SERIAL3_BAUD__tr_baud__c9600Hz 5
+#define R_SERIAL3_BAUD__tr_baud__c19k2Hz 6
+#define R_SERIAL3_BAUD__tr_baud__c38k4Hz 7
+#define R_SERIAL3_BAUD__tr_baud__c57k6Hz 8
+#define R_SERIAL3_BAUD__tr_baud__c115k2Hz 9
+#define R_SERIAL3_BAUD__tr_baud__c230k4Hz 10
+#define R_SERIAL3_BAUD__tr_baud__c460k8Hz 11
+#define R_SERIAL3_BAUD__tr_baud__c921k6Hz 12
+#define R_SERIAL3_BAUD__tr_baud__c1843k2Hz 13
+#define R_SERIAL3_BAUD__tr_baud__c6250kHz 14
+#define R_SERIAL3_BAUD__tr_baud__reserved 15
+#define R_SERIAL3_BAUD__rec_baud__BITNR 0
+#define R_SERIAL3_BAUD__rec_baud__WIDTH 4
+#define R_SERIAL3_BAUD__rec_baud__c300Hz 0
+#define R_SERIAL3_BAUD__rec_baud__c600Hz 1
+#define R_SERIAL3_BAUD__rec_baud__c1200Hz 2
+#define R_SERIAL3_BAUD__rec_baud__c2400Hz 3
+#define R_SERIAL3_BAUD__rec_baud__c4800Hz 4
+#define R_SERIAL3_BAUD__rec_baud__c9600Hz 5
+#define R_SERIAL3_BAUD__rec_baud__c19k2Hz 6
+#define R_SERIAL3_BAUD__rec_baud__c38k4Hz 7
+#define R_SERIAL3_BAUD__rec_baud__c57k6Hz 8
+#define R_SERIAL3_BAUD__rec_baud__c115k2Hz 9
+#define R_SERIAL3_BAUD__rec_baud__c230k4Hz 10
+#define R_SERIAL3_BAUD__rec_baud__c460k8Hz 11
+#define R_SERIAL3_BAUD__rec_baud__c921k6Hz 12
+#define R_SERIAL3_BAUD__rec_baud__c1843k2Hz 13
+#define R_SERIAL3_BAUD__rec_baud__c6250kHz 14
+#define R_SERIAL3_BAUD__rec_baud__reserved 15
+
+#define R_SERIAL3_REC_CTRL (IO_TYPECAST_BYTE 0xb000007a)
+#define R_SERIAL3_REC_CTRL__dma_err__BITNR 7
+#define R_SERIAL3_REC_CTRL__dma_err__WIDTH 1
+#define R_SERIAL3_REC_CTRL__dma_err__stop 0
+#define R_SERIAL3_REC_CTRL__dma_err__ignore 1
+#define R_SERIAL3_REC_CTRL__rec_enable__BITNR 6
+#define R_SERIAL3_REC_CTRL__rec_enable__WIDTH 1
+#define R_SERIAL3_REC_CTRL__rec_enable__disable 0
+#define R_SERIAL3_REC_CTRL__rec_enable__enable 1
+#define R_SERIAL3_REC_CTRL__rts___BITNR 5
+#define R_SERIAL3_REC_CTRL__rts___WIDTH 1
+#define R_SERIAL3_REC_CTRL__rts___active 0
+#define R_SERIAL3_REC_CTRL__rts___inactive 1
+#define R_SERIAL3_REC_CTRL__sampling__BITNR 4
+#define R_SERIAL3_REC_CTRL__sampling__WIDTH 1
+#define R_SERIAL3_REC_CTRL__sampling__middle 0
+#define R_SERIAL3_REC_CTRL__sampling__majority 1
+#define R_SERIAL3_REC_CTRL__rec_stick_par__BITNR 3
+#define R_SERIAL3_REC_CTRL__rec_stick_par__WIDTH 1
+#define R_SERIAL3_REC_CTRL__rec_stick_par__normal 0
+#define R_SERIAL3_REC_CTRL__rec_stick_par__stick 1
+#define R_SERIAL3_REC_CTRL__rec_par__BITNR 2
+#define R_SERIAL3_REC_CTRL__rec_par__WIDTH 1
+#define R_SERIAL3_REC_CTRL__rec_par__even 0
+#define R_SERIAL3_REC_CTRL__rec_par__odd 1
+#define R_SERIAL3_REC_CTRL__rec_par_en__BITNR 1
+#define R_SERIAL3_REC_CTRL__rec_par_en__WIDTH 1
+#define R_SERIAL3_REC_CTRL__rec_par_en__disable 0
+#define R_SERIAL3_REC_CTRL__rec_par_en__enable 1
+#define R_SERIAL3_REC_CTRL__rec_bitnr__BITNR 0
+#define R_SERIAL3_REC_CTRL__rec_bitnr__WIDTH 1
+#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_8bit 0
+#define R_SERIAL3_REC_CTRL__rec_bitnr__rec_7bit 1
+
+#define R_SERIAL3_TR_CTRL (IO_TYPECAST_BYTE 0xb0000079)
+#define R_SERIAL3_TR_CTRL__txd__BITNR 7
+#define R_SERIAL3_TR_CTRL__txd__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_enable__BITNR 6
+#define R_SERIAL3_TR_CTRL__tr_enable__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_enable__disable 0
+#define R_SERIAL3_TR_CTRL__tr_enable__enable 1
+#define R_SERIAL3_TR_CTRL__auto_cts__BITNR 5
+#define R_SERIAL3_TR_CTRL__auto_cts__WIDTH 1
+#define R_SERIAL3_TR_CTRL__auto_cts__disabled 0
+#define R_SERIAL3_TR_CTRL__auto_cts__active 1
+#define R_SERIAL3_TR_CTRL__stop_bits__BITNR 4
+#define R_SERIAL3_TR_CTRL__stop_bits__WIDTH 1
+#define R_SERIAL3_TR_CTRL__stop_bits__one_bit 0
+#define R_SERIAL3_TR_CTRL__stop_bits__two_bits 1
+#define R_SERIAL3_TR_CTRL__tr_stick_par__BITNR 3
+#define R_SERIAL3_TR_CTRL__tr_stick_par__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_stick_par__normal 0
+#define R_SERIAL3_TR_CTRL__tr_stick_par__stick 1
+#define R_SERIAL3_TR_CTRL__tr_par__BITNR 2
+#define R_SERIAL3_TR_CTRL__tr_par__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_par__even 0
+#define R_SERIAL3_TR_CTRL__tr_par__odd 1
+#define R_SERIAL3_TR_CTRL__tr_par_en__BITNR 1
+#define R_SERIAL3_TR_CTRL__tr_par_en__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_par_en__disable 0
+#define R_SERIAL3_TR_CTRL__tr_par_en__enable 1
+#define R_SERIAL3_TR_CTRL__tr_bitnr__BITNR 0
+#define R_SERIAL3_TR_CTRL__tr_bitnr__WIDTH 1
+#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_8bit 0
+#define R_SERIAL3_TR_CTRL__tr_bitnr__tr_7bit 1
+
+#define R_SERIAL3_TR_DATA (IO_TYPECAST_BYTE 0xb0000078)
+#define R_SERIAL3_TR_DATA__data_out__BITNR 0
+#define R_SERIAL3_TR_DATA__data_out__WIDTH 8
+
+#define R_SERIAL3_READ (IO_TYPECAST_RO_UDWORD 0xb0000078)
+#define R_SERIAL3_READ__xoff_detect__BITNR 15
+#define R_SERIAL3_READ__xoff_detect__WIDTH 1
+#define R_SERIAL3_READ__xoff_detect__no_xoff 0
+#define R_SERIAL3_READ__xoff_detect__xoff 1
+#define R_SERIAL3_READ__cts___BITNR 14
+#define R_SERIAL3_READ__cts___WIDTH 1
+#define R_SERIAL3_READ__cts___active 0
+#define R_SERIAL3_READ__cts___inactive 1
+#define R_SERIAL3_READ__tr_ready__BITNR 13
+#define R_SERIAL3_READ__tr_ready__WIDTH 1
+#define R_SERIAL3_READ__tr_ready__full 0
+#define R_SERIAL3_READ__tr_ready__ready 1
+#define R_SERIAL3_READ__rxd__BITNR 12
+#define R_SERIAL3_READ__rxd__WIDTH 1
+#define R_SERIAL3_READ__overrun__BITNR 11
+#define R_SERIAL3_READ__overrun__WIDTH 1
+#define R_SERIAL3_READ__overrun__no 0
+#define R_SERIAL3_READ__overrun__yes 1
+#define R_SERIAL3_READ__par_err__BITNR 10
+#define R_SERIAL3_READ__par_err__WIDTH 1
+#define R_SERIAL3_READ__par_err__no 0
+#define R_SERIAL3_READ__par_err__yes 1
+#define R_SERIAL3_READ__framing_err__BITNR 9
+#define R_SERIAL3_READ__framing_err__WIDTH 1
+#define R_SERIAL3_READ__framing_err__no 0
+#define R_SERIAL3_READ__framing_err__yes 1
+#define R_SERIAL3_READ__data_avail__BITNR 8
+#define R_SERIAL3_READ__data_avail__WIDTH 1
+#define R_SERIAL3_READ__data_avail__no 0
+#define R_SERIAL3_READ__data_avail__yes 1
+#define R_SERIAL3_READ__data_in__BITNR 0
+#define R_SERIAL3_READ__data_in__WIDTH 8
+
+#define R_SERIAL3_STATUS (IO_TYPECAST_RO_BYTE 0xb0000079)
+#define R_SERIAL3_STATUS__xoff_detect__BITNR 7
+#define R_SERIAL3_STATUS__xoff_detect__WIDTH 1
+#define R_SERIAL3_STATUS__xoff_detect__no_xoff 0
+#define R_SERIAL3_STATUS__xoff_detect__xoff 1
+#define R_SERIAL3_STATUS__cts___BITNR 6
+#define R_SERIAL3_STATUS__cts___WIDTH 1
+#define R_SERIAL3_STATUS__cts___active 0
+#define R_SERIAL3_STATUS__cts___inactive 1
+#define R_SERIAL3_STATUS__tr_ready__BITNR 5
+#define R_SERIAL3_STATUS__tr_ready__WIDTH 1
+#define R_SERIAL3_STATUS__tr_ready__full 0
+#define R_SERIAL3_STATUS__tr_ready__ready 1
+#define R_SERIAL3_STATUS__rxd__BITNR 4
+#define R_SERIAL3_STATUS__rxd__WIDTH 1
+#define R_SERIAL3_STATUS__overrun__BITNR 3
+#define R_SERIAL3_STATUS__overrun__WIDTH 1
+#define R_SERIAL3_STATUS__overrun__no 0
+#define R_SERIAL3_STATUS__overrun__yes 1
+#define R_SERIAL3_STATUS__par_err__BITNR 2
+#define R_SERIAL3_STATUS__par_err__WIDTH 1
+#define R_SERIAL3_STATUS__par_err__no 0
+#define R_SERIAL3_STATUS__par_err__yes 1
+#define R_SERIAL3_STATUS__framing_err__BITNR 1
+#define R_SERIAL3_STATUS__framing_err__WIDTH 1
+#define R_SERIAL3_STATUS__framing_err__no 0
+#define R_SERIAL3_STATUS__framing_err__yes 1
+#define R_SERIAL3_STATUS__data_avail__BITNR 0
+#define R_SERIAL3_STATUS__data_avail__WIDTH 1
+#define R_SERIAL3_STATUS__data_avail__no 0
+#define R_SERIAL3_STATUS__data_avail__yes 1
+
+#define R_SERIAL3_REC_DATA (IO_TYPECAST_RO_BYTE 0xb0000078)
+#define R_SERIAL3_REC_DATA__data_in__BITNR 0
+#define R_SERIAL3_REC_DATA__data_in__WIDTH 8
+
+#define R_SERIAL3_XOFF (IO_TYPECAST_UDWORD 0xb000007c)
+#define R_SERIAL3_XOFF__tx_stop__BITNR 9
+#define R_SERIAL3_XOFF__tx_stop__WIDTH 1
+#define R_SERIAL3_XOFF__tx_stop__enable 0
+#define R_SERIAL3_XOFF__tx_stop__stop 1
+#define R_SERIAL3_XOFF__auto_xoff__BITNR 8
+#define R_SERIAL3_XOFF__auto_xoff__WIDTH 1
+#define R_SERIAL3_XOFF__auto_xoff__disable 0
+#define R_SERIAL3_XOFF__auto_xoff__enable 1
+#define R_SERIAL3_XOFF__xoff_char__BITNR 0
+#define R_SERIAL3_XOFF__xoff_char__WIDTH 8
+
+#define R_ALT_SER_BAUDRATE (IO_TYPECAST_UDWORD 0xb000005c)
+#define R_ALT_SER_BAUDRATE__ser3_tr__BITNR 28
+#define R_ALT_SER_BAUDRATE__ser3_tr__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser3_tr__normal 0
+#define R_ALT_SER_BAUDRATE__ser3_tr__prescale 1
+#define R_ALT_SER_BAUDRATE__ser3_tr__extern 2
+#define R_ALT_SER_BAUDRATE__ser3_tr__timer 3
+#define R_ALT_SER_BAUDRATE__ser3_rec__BITNR 24
+#define R_ALT_SER_BAUDRATE__ser3_rec__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser3_rec__normal 0
+#define R_ALT_SER_BAUDRATE__ser3_rec__prescale 1
+#define R_ALT_SER_BAUDRATE__ser3_rec__extern 2
+#define R_ALT_SER_BAUDRATE__ser3_rec__timer 3
+#define R_ALT_SER_BAUDRATE__ser2_tr__BITNR 20
+#define R_ALT_SER_BAUDRATE__ser2_tr__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser2_tr__normal 0
+#define R_ALT_SER_BAUDRATE__ser2_tr__prescale 1
+#define R_ALT_SER_BAUDRATE__ser2_tr__extern 2
+#define R_ALT_SER_BAUDRATE__ser2_tr__timer 3
+#define R_ALT_SER_BAUDRATE__ser2_rec__BITNR 16
+#define R_ALT_SER_BAUDRATE__ser2_rec__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser2_rec__normal 0
+#define R_ALT_SER_BAUDRATE__ser2_rec__prescale 1
+#define R_ALT_SER_BAUDRATE__ser2_rec__extern 2
+#define R_ALT_SER_BAUDRATE__ser2_rec__timer 3
+#define R_ALT_SER_BAUDRATE__ser1_tr__BITNR 12
+#define R_ALT_SER_BAUDRATE__ser1_tr__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser1_tr__normal 0
+#define R_ALT_SER_BAUDRATE__ser1_tr__prescale 1
+#define R_ALT_SER_BAUDRATE__ser1_tr__extern 2
+#define R_ALT_SER_BAUDRATE__ser1_tr__timer 3
+#define R_ALT_SER_BAUDRATE__ser1_rec__BITNR 8
+#define R_ALT_SER_BAUDRATE__ser1_rec__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser1_rec__normal 0
+#define R_ALT_SER_BAUDRATE__ser1_rec__prescale 1
+#define R_ALT_SER_BAUDRATE__ser1_rec__extern 2
+#define R_ALT_SER_BAUDRATE__ser1_rec__timer 3
+#define R_ALT_SER_BAUDRATE__ser0_tr__BITNR 4
+#define R_ALT_SER_BAUDRATE__ser0_tr__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser0_tr__normal 0
+#define R_ALT_SER_BAUDRATE__ser0_tr__prescale 1
+#define R_ALT_SER_BAUDRATE__ser0_tr__extern 2
+#define R_ALT_SER_BAUDRATE__ser0_tr__timer 3
+#define R_ALT_SER_BAUDRATE__ser0_rec__BITNR 0
+#define R_ALT_SER_BAUDRATE__ser0_rec__WIDTH 2
+#define R_ALT_SER_BAUDRATE__ser0_rec__normal 0
+#define R_ALT_SER_BAUDRATE__ser0_rec__prescale 1
+#define R_ALT_SER_BAUDRATE__ser0_rec__extern 2
+#define R_ALT_SER_BAUDRATE__ser0_rec__timer 3
+
+/*
+!* Network interface registers
+!*/
+
+#define R_NETWORK_SA_0 (IO_TYPECAST_UDWORD 0xb0000080)
+#define R_NETWORK_SA_0__ma0_low__BITNR 0
+#define R_NETWORK_SA_0__ma0_low__WIDTH 32
+
+#define R_NETWORK_SA_1 (IO_TYPECAST_UDWORD 0xb0000084)
+#define R_NETWORK_SA_1__ma1_low__BITNR 16
+#define R_NETWORK_SA_1__ma1_low__WIDTH 16
+#define R_NETWORK_SA_1__ma0_high__BITNR 0
+#define R_NETWORK_SA_1__ma0_high__WIDTH 16
+
+#define R_NETWORK_SA_2 (IO_TYPECAST_UDWORD 0xb0000088)
+#define R_NETWORK_SA_2__ma1_high__BITNR 0
+#define R_NETWORK_SA_2__ma1_high__WIDTH 32
+
+#define R_NETWORK_GA_0 (IO_TYPECAST_UDWORD 0xb000008c)
+#define R_NETWORK_GA_0__ga_low__BITNR 0
+#define R_NETWORK_GA_0__ga_low__WIDTH 32
+
+#define R_NETWORK_GA_1 (IO_TYPECAST_UDWORD 0xb0000090)
+#define R_NETWORK_GA_1__ga_high__BITNR 0
+#define R_NETWORK_GA_1__ga_high__WIDTH 32
+
+#define R_NETWORK_REC_CONFIG (IO_TYPECAST_UDWORD 0xb0000094)
+#define R_NETWORK_REC_CONFIG__max_size__BITNR 10
+#define R_NETWORK_REC_CONFIG__max_size__WIDTH 1
+#define R_NETWORK_REC_CONFIG__max_size__size1518 0
+#define R_NETWORK_REC_CONFIG__max_size__size1522 1
+#define R_NETWORK_REC_CONFIG__duplex__BITNR 9
+#define R_NETWORK_REC_CONFIG__duplex__WIDTH 1
+#define R_NETWORK_REC_CONFIG__duplex__full 1
+#define R_NETWORK_REC_CONFIG__duplex__half 0
+#define R_NETWORK_REC_CONFIG__bad_crc__BITNR 8
+#define R_NETWORK_REC_CONFIG__bad_crc__WIDTH 1
+#define R_NETWORK_REC_CONFIG__bad_crc__receive 1
+#define R_NETWORK_REC_CONFIG__bad_crc__discard 0
+#define R_NETWORK_REC_CONFIG__oversize__BITNR 7
+#define R_NETWORK_REC_CONFIG__oversize__WIDTH 1
+#define R_NETWORK_REC_CONFIG__oversize__receive 1
+#define R_NETWORK_REC_CONFIG__oversize__discard 0
+#define R_NETWORK_REC_CONFIG__undersize__BITNR 6
+#define R_NETWORK_REC_CONFIG__undersize__WIDTH 1
+#define R_NETWORK_REC_CONFIG__undersize__receive 1
+#define R_NETWORK_REC_CONFIG__undersize__discard 0
+#define R_NETWORK_REC_CONFIG__all_roots__BITNR 5
+#define R_NETWORK_REC_CONFIG__all_roots__WIDTH 1
+#define R_NETWORK_REC_CONFIG__all_roots__receive 1
+#define R_NETWORK_REC_CONFIG__all_roots__discard 0
+#define R_NETWORK_REC_CONFIG__tr_broadcast__BITNR 4
+#define R_NETWORK_REC_CONFIG__tr_broadcast__WIDTH 1
+#define R_NETWORK_REC_CONFIG__tr_broadcast__receive 1
+#define R_NETWORK_REC_CONFIG__tr_broadcast__discard 0
+#define R_NETWORK_REC_CONFIG__broadcast__BITNR 3
+#define R_NETWORK_REC_CONFIG__broadcast__WIDTH 1
+#define R_NETWORK_REC_CONFIG__broadcast__receive 1
+#define R_NETWORK_REC_CONFIG__broadcast__discard 0
+#define R_NETWORK_REC_CONFIG__individual__BITNR 2
+#define R_NETWORK_REC_CONFIG__individual__WIDTH 1
+#define R_NETWORK_REC_CONFIG__individual__receive 1
+#define R_NETWORK_REC_CONFIG__individual__discard 0
+#define R_NETWORK_REC_CONFIG__ma1__BITNR 1
+#define R_NETWORK_REC_CONFIG__ma1__WIDTH 1
+#define R_NETWORK_REC_CONFIG__ma1__enable 1
+#define R_NETWORK_REC_CONFIG__ma1__disable 0
+#define R_NETWORK_REC_CONFIG__ma0__BITNR 0
+#define R_NETWORK_REC_CONFIG__ma0__WIDTH 1
+#define R_NETWORK_REC_CONFIG__ma0__enable 1
+#define R_NETWORK_REC_CONFIG__ma0__disable 0
+
+#define R_NETWORK_GEN_CONFIG (IO_TYPECAST_UDWORD 0xb0000098)
+#define R_NETWORK_GEN_CONFIG__loopback__BITNR 5
+#define R_NETWORK_GEN_CONFIG__loopback__WIDTH 1
+#define R_NETWORK_GEN_CONFIG__loopback__on 1
+#define R_NETWORK_GEN_CONFIG__loopback__off 0
+#define R_NETWORK_GEN_CONFIG__frame__BITNR 4
+#define R_NETWORK_GEN_CONFIG__frame__WIDTH 1
+#define R_NETWORK_GEN_CONFIG__frame__tokenr 1
+#define R_NETWORK_GEN_CONFIG__frame__ether 0
+#define R_NETWORK_GEN_CONFIG__vg__BITNR 3
+#define R_NETWORK_GEN_CONFIG__vg__WIDTH 1
+#define R_NETWORK_GEN_CONFIG__vg__on 1
+#define R_NETWORK_GEN_CONFIG__vg__off 0
+#define R_NETWORK_GEN_CONFIG__phy__BITNR 1
+#define R_NETWORK_GEN_CONFIG__phy__WIDTH 2
+#define R_NETWORK_GEN_CONFIG__phy__sni 0
+#define R_NETWORK_GEN_CONFIG__phy__mii_clk 1
+#define R_NETWORK_GEN_CONFIG__phy__mii_err 2
+#define R_NETWORK_GEN_CONFIG__phy__mii_req 3
+#define R_NETWORK_GEN_CONFIG__enable__BITNR 0
+#define R_NETWORK_GEN_CONFIG__enable__WIDTH 1
+#define R_NETWORK_GEN_CONFIG__enable__on 1
+#define R_NETWORK_GEN_CONFIG__enable__off 0
+
+#define R_NETWORK_TR_CTRL (IO_TYPECAST_UDWORD 0xb000009c)
+#define R_NETWORK_TR_CTRL__clr_error__BITNR 8
+#define R_NETWORK_TR_CTRL__clr_error__WIDTH 1
+#define R_NETWORK_TR_CTRL__clr_error__clr 1
+#define R_NETWORK_TR_CTRL__clr_error__nop 0
+#define R_NETWORK_TR_CTRL__delay__BITNR 5
+#define R_NETWORK_TR_CTRL__delay__WIDTH 1
+#define R_NETWORK_TR_CTRL__delay__d2us 1
+#define R_NETWORK_TR_CTRL__delay__none 0
+#define R_NETWORK_TR_CTRL__cancel__BITNR 4
+#define R_NETWORK_TR_CTRL__cancel__WIDTH 1
+#define R_NETWORK_TR_CTRL__cancel__do 1
+#define R_NETWORK_TR_CTRL__cancel__dont 0
+#define R_NETWORK_TR_CTRL__cd__BITNR 3
+#define R_NETWORK_TR_CTRL__cd__WIDTH 1
+#define R_NETWORK_TR_CTRL__cd__enable 0
+#define R_NETWORK_TR_CTRL__cd__disable 1
+#define R_NETWORK_TR_CTRL__cd__ack_col 0
+#define R_NETWORK_TR_CTRL__cd__ack_crs 1
+#define R_NETWORK_TR_CTRL__retry__BITNR 2
+#define R_NETWORK_TR_CTRL__retry__WIDTH 1
+#define R_NETWORK_TR_CTRL__retry__enable 0
+#define R_NETWORK_TR_CTRL__retry__disable 1
+#define R_NETWORK_TR_CTRL__pad__BITNR 1
+#define R_NETWORK_TR_CTRL__pad__WIDTH 1
+#define R_NETWORK_TR_CTRL__pad__enable 1
+#define R_NETWORK_TR_CTRL__pad__disable 0
+#define R_NETWORK_TR_CTRL__crc__BITNR 0
+#define R_NETWORK_TR_CTRL__crc__WIDTH 1
+#define R_NETWORK_TR_CTRL__crc__enable 0
+#define R_NETWORK_TR_CTRL__crc__disable 1
+
+#define R_NETWORK_MGM_CTRL (IO_TYPECAST_UDWORD 0xb00000a0)
+#define R_NETWORK_MGM_CTRL__txd_pins__BITNR 4
+#define R_NETWORK_MGM_CTRL__txd_pins__WIDTH 4
+#define R_NETWORK_MGM_CTRL__txer_pin__BITNR 3
+#define R_NETWORK_MGM_CTRL__txer_pin__WIDTH 1
+#define R_NETWORK_MGM_CTRL__mdck__BITNR 2
+#define R_NETWORK_MGM_CTRL__mdck__WIDTH 1
+#define R_NETWORK_MGM_CTRL__mdoe__BITNR 1
+#define R_NETWORK_MGM_CTRL__mdoe__WIDTH 1
+#define R_NETWORK_MGM_CTRL__mdoe__enable 1
+#define R_NETWORK_MGM_CTRL__mdoe__disable 0
+#define R_NETWORK_MGM_CTRL__mdio__BITNR 0
+#define R_NETWORK_MGM_CTRL__mdio__WIDTH 1
+
+#define R_NETWORK_STAT (IO_TYPECAST_RO_UDWORD 0xb00000a0)
+#define R_NETWORK_STAT__rxd_pins__BITNR 4
+#define R_NETWORK_STAT__rxd_pins__WIDTH 4
+#define R_NETWORK_STAT__rxer__BITNR 3
+#define R_NETWORK_STAT__rxer__WIDTH 1
+#define R_NETWORK_STAT__underrun__BITNR 2
+#define R_NETWORK_STAT__underrun__WIDTH 1
+#define R_NETWORK_STAT__underrun__yes 1
+#define R_NETWORK_STAT__underrun__no 0
+#define R_NETWORK_STAT__exc_col__BITNR 1
+#define R_NETWORK_STAT__exc_col__WIDTH 1
+#define R_NETWORK_STAT__exc_col__yes 1
+#define R_NETWORK_STAT__exc_col__no 0
+#define R_NETWORK_STAT__mdio__BITNR 0
+#define R_NETWORK_STAT__mdio__WIDTH 1
+
+#define R_REC_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a4)
+#define R_REC_COUNTERS__congestion__BITNR 24
+#define R_REC_COUNTERS__congestion__WIDTH 8
+#define R_REC_COUNTERS__oversize__BITNR 16
+#define R_REC_COUNTERS__oversize__WIDTH 8
+#define R_REC_COUNTERS__alignment_error__BITNR 8
+#define R_REC_COUNTERS__alignment_error__WIDTH 8
+#define R_REC_COUNTERS__crc_error__BITNR 0
+#define R_REC_COUNTERS__crc_error__WIDTH 8
+
+#define R_TR_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000a8)
+#define R_TR_COUNTERS__deferred__BITNR 24
+#define R_TR_COUNTERS__deferred__WIDTH 8
+#define R_TR_COUNTERS__late_col__BITNR 16
+#define R_TR_COUNTERS__late_col__WIDTH 8
+#define R_TR_COUNTERS__multiple_col__BITNR 8
+#define R_TR_COUNTERS__multiple_col__WIDTH 8
+#define R_TR_COUNTERS__single_col__BITNR 0
+#define R_TR_COUNTERS__single_col__WIDTH 8
+
+#define R_PHY_COUNTERS (IO_TYPECAST_RO_UDWORD 0xb00000ac)
+#define R_PHY_COUNTERS__sqe_test_error__BITNR 8
+#define R_PHY_COUNTERS__sqe_test_error__WIDTH 8
+#define R_PHY_COUNTERS__carrier_loss__BITNR 0
+#define R_PHY_COUNTERS__carrier_loss__WIDTH 8
+
+/*
+!* Parallel printer port registers
+!*/
+
+#define R_PAR0_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040)
+#define R_PAR0_CTRL_DATA__peri_int__BITNR 24
+#define R_PAR0_CTRL_DATA__peri_int__WIDTH 1
+#define R_PAR0_CTRL_DATA__peri_int__ack 1
+#define R_PAR0_CTRL_DATA__peri_int__nop 0
+#define R_PAR0_CTRL_DATA__oe__BITNR 20
+#define R_PAR0_CTRL_DATA__oe__WIDTH 1
+#define R_PAR0_CTRL_DATA__oe__enable 1
+#define R_PAR0_CTRL_DATA__oe__disable 0
+#define R_PAR0_CTRL_DATA__seli__BITNR 19
+#define R_PAR0_CTRL_DATA__seli__WIDTH 1
+#define R_PAR0_CTRL_DATA__seli__active 1
+#define R_PAR0_CTRL_DATA__seli__inactive 0
+#define R_PAR0_CTRL_DATA__autofd__BITNR 18
+#define R_PAR0_CTRL_DATA__autofd__WIDTH 1
+#define R_PAR0_CTRL_DATA__autofd__active 1
+#define R_PAR0_CTRL_DATA__autofd__inactive 0
+#define R_PAR0_CTRL_DATA__strb__BITNR 17
+#define R_PAR0_CTRL_DATA__strb__WIDTH 1
+#define R_PAR0_CTRL_DATA__strb__active 1
+#define R_PAR0_CTRL_DATA__strb__inactive 0
+#define R_PAR0_CTRL_DATA__init__BITNR 16
+#define R_PAR0_CTRL_DATA__init__WIDTH 1
+#define R_PAR0_CTRL_DATA__init__active 1
+#define R_PAR0_CTRL_DATA__init__inactive 0
+#define R_PAR0_CTRL_DATA__ecp_cmd__BITNR 8
+#define R_PAR0_CTRL_DATA__ecp_cmd__WIDTH 1
+#define R_PAR0_CTRL_DATA__ecp_cmd__command 1
+#define R_PAR0_CTRL_DATA__ecp_cmd__data 0
+#define R_PAR0_CTRL_DATA__data__BITNR 0
+#define R_PAR0_CTRL_DATA__data__WIDTH 8
+
+#define R_PAR0_CTRL (IO_TYPECAST_BYTE 0xb0000042)
+#define R_PAR0_CTRL__ctrl__BITNR 0
+#define R_PAR0_CTRL__ctrl__WIDTH 5
+
+#define R_PAR0_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040)
+#define R_PAR0_STATUS_DATA__mode__BITNR 29
+#define R_PAR0_STATUS_DATA__mode__WIDTH 3
+#define R_PAR0_STATUS_DATA__mode__manual 0
+#define R_PAR0_STATUS_DATA__mode__centronics 1
+#define R_PAR0_STATUS_DATA__mode__fastbyte 2
+#define R_PAR0_STATUS_DATA__mode__nibble 3
+#define R_PAR0_STATUS_DATA__mode__byte 4
+#define R_PAR0_STATUS_DATA__mode__ecp_fwd 5
+#define R_PAR0_STATUS_DATA__mode__ecp_rev 6
+#define R_PAR0_STATUS_DATA__mode__off 7
+#define R_PAR0_STATUS_DATA__mode__epp_wr1 5
+#define R_PAR0_STATUS_DATA__mode__epp_wr2 6
+#define R_PAR0_STATUS_DATA__mode__epp_wr3 7
+#define R_PAR0_STATUS_DATA__mode__epp_rd 0
+#define R_PAR0_STATUS_DATA__perr__BITNR 28
+#define R_PAR0_STATUS_DATA__perr__WIDTH 1
+#define R_PAR0_STATUS_DATA__perr__active 1
+#define R_PAR0_STATUS_DATA__perr__inactive 0
+#define R_PAR0_STATUS_DATA__ack__BITNR 27
+#define R_PAR0_STATUS_DATA__ack__WIDTH 1
+#define R_PAR0_STATUS_DATA__ack__active 0
+#define R_PAR0_STATUS_DATA__ack__inactive 1
+#define R_PAR0_STATUS_DATA__busy__BITNR 26
+#define R_PAR0_STATUS_DATA__busy__WIDTH 1
+#define R_PAR0_STATUS_DATA__busy__active 1
+#define R_PAR0_STATUS_DATA__busy__inactive 0
+#define R_PAR0_STATUS_DATA__fault__BITNR 25
+#define R_PAR0_STATUS_DATA__fault__WIDTH 1
+#define R_PAR0_STATUS_DATA__fault__active 0
+#define R_PAR0_STATUS_DATA__fault__inactive 1
+#define R_PAR0_STATUS_DATA__sel__BITNR 24
+#define R_PAR0_STATUS_DATA__sel__WIDTH 1
+#define R_PAR0_STATUS_DATA__sel__active 1
+#define R_PAR0_STATUS_DATA__sel__inactive 0
+#define R_PAR0_STATUS_DATA__ext_mode__BITNR 23
+#define R_PAR0_STATUS_DATA__ext_mode__WIDTH 1
+#define R_PAR0_STATUS_DATA__ext_mode__enable 1
+#define R_PAR0_STATUS_DATA__ext_mode__disable 0
+#define R_PAR0_STATUS_DATA__ecp_16__BITNR 22
+#define R_PAR0_STATUS_DATA__ecp_16__WIDTH 1
+#define R_PAR0_STATUS_DATA__ecp_16__active 1
+#define R_PAR0_STATUS_DATA__ecp_16__inactive 0
+#define R_PAR0_STATUS_DATA__tr_rdy__BITNR 17
+#define R_PAR0_STATUS_DATA__tr_rdy__WIDTH 1
+#define R_PAR0_STATUS_DATA__tr_rdy__ready 1
+#define R_PAR0_STATUS_DATA__tr_rdy__busy 0
+#define R_PAR0_STATUS_DATA__dav__BITNR 16
+#define R_PAR0_STATUS_DATA__dav__WIDTH 1
+#define R_PAR0_STATUS_DATA__dav__data 1
+#define R_PAR0_STATUS_DATA__dav__nodata 0
+#define R_PAR0_STATUS_DATA__ecp_cmd__BITNR 8
+#define R_PAR0_STATUS_DATA__ecp_cmd__WIDTH 1
+#define R_PAR0_STATUS_DATA__ecp_cmd__command 1
+#define R_PAR0_STATUS_DATA__ecp_cmd__data 0
+#define R_PAR0_STATUS_DATA__data__BITNR 0
+#define R_PAR0_STATUS_DATA__data__WIDTH 8
+
+#define R_PAR0_STATUS (IO_TYPECAST_RO_UWORD 0xb0000042)
+#define R_PAR0_STATUS__mode__BITNR 13
+#define R_PAR0_STATUS__mode__WIDTH 3
+#define R_PAR0_STATUS__mode__manual 0
+#define R_PAR0_STATUS__mode__centronics 1
+#define R_PAR0_STATUS__mode__fastbyte 2
+#define R_PAR0_STATUS__mode__nibble 3
+#define R_PAR0_STATUS__mode__byte 4
+#define R_PAR0_STATUS__mode__ecp_fwd 5
+#define R_PAR0_STATUS__mode__ecp_rev 6
+#define R_PAR0_STATUS__mode__off 7
+#define R_PAR0_STATUS__mode__epp_wr1 5
+#define R_PAR0_STATUS__mode__epp_wr2 6
+#define R_PAR0_STATUS__mode__epp_wr3 7
+#define R_PAR0_STATUS__mode__epp_rd 0
+#define R_PAR0_STATUS__perr__BITNR 12
+#define R_PAR0_STATUS__perr__WIDTH 1
+#define R_PAR0_STATUS__perr__active 1
+#define R_PAR0_STATUS__perr__inactive 0
+#define R_PAR0_STATUS__ack__BITNR 11
+#define R_PAR0_STATUS__ack__WIDTH 1
+#define R_PAR0_STATUS__ack__active 0
+#define R_PAR0_STATUS__ack__inactive 1
+#define R_PAR0_STATUS__busy__BITNR 10
+#define R_PAR0_STATUS__busy__WIDTH 1
+#define R_PAR0_STATUS__busy__active 1
+#define R_PAR0_STATUS__busy__inactive 0
+#define R_PAR0_STATUS__fault__BITNR 9
+#define R_PAR0_STATUS__fault__WIDTH 1
+#define R_PAR0_STATUS__fault__active 0
+#define R_PAR0_STATUS__fault__inactive 1
+#define R_PAR0_STATUS__sel__BITNR 8
+#define R_PAR0_STATUS__sel__WIDTH 1
+#define R_PAR0_STATUS__sel__active 1
+#define R_PAR0_STATUS__sel__inactive 0
+#define R_PAR0_STATUS__ext_mode__BITNR 7
+#define R_PAR0_STATUS__ext_mode__WIDTH 1
+#define R_PAR0_STATUS__ext_mode__enable 1
+#define R_PAR0_STATUS__ext_mode__disable 0
+#define R_PAR0_STATUS__ecp_16__BITNR 6
+#define R_PAR0_STATUS__ecp_16__WIDTH 1
+#define R_PAR0_STATUS__ecp_16__active 1
+#define R_PAR0_STATUS__ecp_16__inactive 0
+#define R_PAR0_STATUS__tr_rdy__BITNR 1
+#define R_PAR0_STATUS__tr_rdy__WIDTH 1
+#define R_PAR0_STATUS__tr_rdy__ready 1
+#define R_PAR0_STATUS__tr_rdy__busy 0
+#define R_PAR0_STATUS__dav__BITNR 0
+#define R_PAR0_STATUS__dav__WIDTH 1
+#define R_PAR0_STATUS__dav__data 1
+#define R_PAR0_STATUS__dav__nodata 0
+
+#define R_PAR_ECP16_DATA (IO_TYPECAST_UWORD 0xb0000040)
+#define R_PAR_ECP16_DATA__data__BITNR 0
+#define R_PAR_ECP16_DATA__data__WIDTH 16
+
+#define R_PAR0_CONFIG (IO_TYPECAST_UDWORD 0xb0000044)
+#define R_PAR0_CONFIG__ioe__BITNR 25
+#define R_PAR0_CONFIG__ioe__WIDTH 1
+#define R_PAR0_CONFIG__ioe__inv 1
+#define R_PAR0_CONFIG__ioe__noninv 0
+#define R_PAR0_CONFIG__iseli__BITNR 24
+#define R_PAR0_CONFIG__iseli__WIDTH 1
+#define R_PAR0_CONFIG__iseli__inv 1
+#define R_PAR0_CONFIG__iseli__noninv 0
+#define R_PAR0_CONFIG__iautofd__BITNR 23
+#define R_PAR0_CONFIG__iautofd__WIDTH 1
+#define R_PAR0_CONFIG__iautofd__inv 1
+#define R_PAR0_CONFIG__iautofd__noninv 0
+#define R_PAR0_CONFIG__istrb__BITNR 22
+#define R_PAR0_CONFIG__istrb__WIDTH 1
+#define R_PAR0_CONFIG__istrb__inv 1
+#define R_PAR0_CONFIG__istrb__noninv 0
+#define R_PAR0_CONFIG__iinit__BITNR 21
+#define R_PAR0_CONFIG__iinit__WIDTH 1
+#define R_PAR0_CONFIG__iinit__inv 1
+#define R_PAR0_CONFIG__iinit__noninv 0
+#define R_PAR0_CONFIG__iperr__BITNR 20
+#define R_PAR0_CONFIG__iperr__WIDTH 1
+#define R_PAR0_CONFIG__iperr__inv 1
+#define R_PAR0_CONFIG__iperr__noninv 0
+#define R_PAR0_CONFIG__iack__BITNR 19
+#define R_PAR0_CONFIG__iack__WIDTH 1
+#define R_PAR0_CONFIG__iack__inv 1
+#define R_PAR0_CONFIG__iack__noninv 0
+#define R_PAR0_CONFIG__ibusy__BITNR 18
+#define R_PAR0_CONFIG__ibusy__WIDTH 1
+#define R_PAR0_CONFIG__ibusy__inv 1
+#define R_PAR0_CONFIG__ibusy__noninv 0
+#define R_PAR0_CONFIG__ifault__BITNR 17
+#define R_PAR0_CONFIG__ifault__WIDTH 1
+#define R_PAR0_CONFIG__ifault__inv 1
+#define R_PAR0_CONFIG__ifault__noninv 0
+#define R_PAR0_CONFIG__isel__BITNR 16
+#define R_PAR0_CONFIG__isel__WIDTH 1
+#define R_PAR0_CONFIG__isel__inv 1
+#define R_PAR0_CONFIG__isel__noninv 0
+#define R_PAR0_CONFIG__ext_mode__BITNR 11
+#define R_PAR0_CONFIG__ext_mode__WIDTH 1
+#define R_PAR0_CONFIG__ext_mode__enable 1
+#define R_PAR0_CONFIG__ext_mode__disable 0
+#define R_PAR0_CONFIG__wide__BITNR 10
+#define R_PAR0_CONFIG__wide__WIDTH 1
+#define R_PAR0_CONFIG__wide__enable 1
+#define R_PAR0_CONFIG__wide__disable 0
+#define R_PAR0_CONFIG__dma__BITNR 9
+#define R_PAR0_CONFIG__dma__WIDTH 1
+#define R_PAR0_CONFIG__dma__enable 1
+#define R_PAR0_CONFIG__dma__disable 0
+#define R_PAR0_CONFIG__rle_in__BITNR 8
+#define R_PAR0_CONFIG__rle_in__WIDTH 1
+#define R_PAR0_CONFIG__rle_in__enable 1
+#define R_PAR0_CONFIG__rle_in__disable 0
+#define R_PAR0_CONFIG__rle_out__BITNR 7
+#define R_PAR0_CONFIG__rle_out__WIDTH 1
+#define R_PAR0_CONFIG__rle_out__enable 1
+#define R_PAR0_CONFIG__rle_out__disable 0
+#define R_PAR0_CONFIG__enable__BITNR 6
+#define R_PAR0_CONFIG__enable__WIDTH 1
+#define R_PAR0_CONFIG__enable__on 1
+#define R_PAR0_CONFIG__enable__reset 0
+#define R_PAR0_CONFIG__force__BITNR 5
+#define R_PAR0_CONFIG__force__WIDTH 1
+#define R_PAR0_CONFIG__force__on 1
+#define R_PAR0_CONFIG__force__off 0
+#define R_PAR0_CONFIG__ign_ack__BITNR 4
+#define R_PAR0_CONFIG__ign_ack__WIDTH 1
+#define R_PAR0_CONFIG__ign_ack__ignore 1
+#define R_PAR0_CONFIG__ign_ack__wait 0
+#define R_PAR0_CONFIG__oe_ack__BITNR 3
+#define R_PAR0_CONFIG__oe_ack__WIDTH 1
+#define R_PAR0_CONFIG__oe_ack__wait_oe 1
+#define R_PAR0_CONFIG__oe_ack__dont_wait 0
+#define R_PAR0_CONFIG__oe_ack__epp_addr 1
+#define R_PAR0_CONFIG__oe_ack__epp_data 0
+#define R_PAR0_CONFIG__epp_addr_data__BITNR 3
+#define R_PAR0_CONFIG__epp_addr_data__WIDTH 1
+#define R_PAR0_CONFIG__epp_addr_data__wait_oe 1
+#define R_PAR0_CONFIG__epp_addr_data__dont_wait 0
+#define R_PAR0_CONFIG__epp_addr_data__epp_addr 1
+#define R_PAR0_CONFIG__epp_addr_data__epp_data 0
+#define R_PAR0_CONFIG__mode__BITNR 0
+#define R_PAR0_CONFIG__mode__WIDTH 3
+#define R_PAR0_CONFIG__mode__manual 0
+#define R_PAR0_CONFIG__mode__centronics 1
+#define R_PAR0_CONFIG__mode__fastbyte 2
+#define R_PAR0_CONFIG__mode__nibble 3
+#define R_PAR0_CONFIG__mode__byte 4
+#define R_PAR0_CONFIG__mode__ecp_fwd 5
+#define R_PAR0_CONFIG__mode__ecp_rev 6
+#define R_PAR0_CONFIG__mode__off 7
+#define R_PAR0_CONFIG__mode__epp_wr1 5
+#define R_PAR0_CONFIG__mode__epp_wr2 6
+#define R_PAR0_CONFIG__mode__epp_wr3 7
+#define R_PAR0_CONFIG__mode__epp_rd 0
+
+#define R_PAR0_DELAY (IO_TYPECAST_UDWORD 0xb0000048)
+#define R_PAR0_DELAY__fine_hold__BITNR 21
+#define R_PAR0_DELAY__fine_hold__WIDTH 3
+#define R_PAR0_DELAY__hold__BITNR 16
+#define R_PAR0_DELAY__hold__WIDTH 5
+#define R_PAR0_DELAY__fine_strb__BITNR 13
+#define R_PAR0_DELAY__fine_strb__WIDTH 3
+#define R_PAR0_DELAY__strobe__BITNR 8
+#define R_PAR0_DELAY__strobe__WIDTH 5
+#define R_PAR0_DELAY__fine_setup__BITNR 5
+#define R_PAR0_DELAY__fine_setup__WIDTH 3
+#define R_PAR0_DELAY__setup__BITNR 0
+#define R_PAR0_DELAY__setup__WIDTH 5
+
+#define R_PAR1_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000050)
+#define R_PAR1_CTRL_DATA__peri_int__BITNR 24
+#define R_PAR1_CTRL_DATA__peri_int__WIDTH 1
+#define R_PAR1_CTRL_DATA__peri_int__ack 1
+#define R_PAR1_CTRL_DATA__peri_int__nop 0
+#define R_PAR1_CTRL_DATA__oe__BITNR 20
+#define R_PAR1_CTRL_DATA__oe__WIDTH 1
+#define R_PAR1_CTRL_DATA__oe__enable 1
+#define R_PAR1_CTRL_DATA__oe__disable 0
+#define R_PAR1_CTRL_DATA__seli__BITNR 19
+#define R_PAR1_CTRL_DATA__seli__WIDTH 1
+#define R_PAR1_CTRL_DATA__seli__active 1
+#define R_PAR1_CTRL_DATA__seli__inactive 0
+#define R_PAR1_CTRL_DATA__autofd__BITNR 18
+#define R_PAR1_CTRL_DATA__autofd__WIDTH 1
+#define R_PAR1_CTRL_DATA__autofd__active 1
+#define R_PAR1_CTRL_DATA__autofd__inactive 0
+#define R_PAR1_CTRL_DATA__strb__BITNR 17
+#define R_PAR1_CTRL_DATA__strb__WIDTH 1
+#define R_PAR1_CTRL_DATA__strb__active 1
+#define R_PAR1_CTRL_DATA__strb__inactive 0
+#define R_PAR1_CTRL_DATA__init__BITNR 16
+#define R_PAR1_CTRL_DATA__init__WIDTH 1
+#define R_PAR1_CTRL_DATA__init__active 1
+#define R_PAR1_CTRL_DATA__init__inactive 0
+#define R_PAR1_CTRL_DATA__ecp_cmd__BITNR 8
+#define R_PAR1_CTRL_DATA__ecp_cmd__WIDTH 1
+#define R_PAR1_CTRL_DATA__ecp_cmd__command 1
+#define R_PAR1_CTRL_DATA__ecp_cmd__data 0
+#define R_PAR1_CTRL_DATA__data__BITNR 0
+#define R_PAR1_CTRL_DATA__data__WIDTH 8
+
+#define R_PAR1_CTRL (IO_TYPECAST_BYTE 0xb0000052)
+#define R_PAR1_CTRL__ctrl__BITNR 0
+#define R_PAR1_CTRL__ctrl__WIDTH 5
+
+#define R_PAR1_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000050)
+#define R_PAR1_STATUS_DATA__mode__BITNR 29
+#define R_PAR1_STATUS_DATA__mode__WIDTH 3
+#define R_PAR1_STATUS_DATA__mode__manual 0
+#define R_PAR1_STATUS_DATA__mode__centronics 1
+#define R_PAR1_STATUS_DATA__mode__fastbyte 2
+#define R_PAR1_STATUS_DATA__mode__nibble 3
+#define R_PAR1_STATUS_DATA__mode__byte 4
+#define R_PAR1_STATUS_DATA__mode__ecp_fwd 5
+#define R_PAR1_STATUS_DATA__mode__ecp_rev 6
+#define R_PAR1_STATUS_DATA__mode__off 7
+#define R_PAR1_STATUS_DATA__mode__epp_wr1 5
+#define R_PAR1_STATUS_DATA__mode__epp_wr2 6
+#define R_PAR1_STATUS_DATA__mode__epp_wr3 7
+#define R_PAR1_STATUS_DATA__mode__epp_rd 0
+#define R_PAR1_STATUS_DATA__perr__BITNR 28
+#define R_PAR1_STATUS_DATA__perr__WIDTH 1
+#define R_PAR1_STATUS_DATA__perr__active 1
+#define R_PAR1_STATUS_DATA__perr__inactive 0
+#define R_PAR1_STATUS_DATA__ack__BITNR 27
+#define R_PAR1_STATUS_DATA__ack__WIDTH 1
+#define R_PAR1_STATUS_DATA__ack__active 0
+#define R_PAR1_STATUS_DATA__ack__inactive 1
+#define R_PAR1_STATUS_DATA__busy__BITNR 26
+#define R_PAR1_STATUS_DATA__busy__WIDTH 1
+#define R_PAR1_STATUS_DATA__busy__active 1
+#define R_PAR1_STATUS_DATA__busy__inactive 0
+#define R_PAR1_STATUS_DATA__fault__BITNR 25
+#define R_PAR1_STATUS_DATA__fault__WIDTH 1
+#define R_PAR1_STATUS_DATA__fault__active 0
+#define R_PAR1_STATUS_DATA__fault__inactive 1
+#define R_PAR1_STATUS_DATA__sel__BITNR 24
+#define R_PAR1_STATUS_DATA__sel__WIDTH 1
+#define R_PAR1_STATUS_DATA__sel__active 1
+#define R_PAR1_STATUS_DATA__sel__inactive 0
+#define R_PAR1_STATUS_DATA__ext_mode__BITNR 23
+#define R_PAR1_STATUS_DATA__ext_mode__WIDTH 1
+#define R_PAR1_STATUS_DATA__ext_mode__enable 1
+#define R_PAR1_STATUS_DATA__ext_mode__disable 0
+#define R_PAR1_STATUS_DATA__tr_rdy__BITNR 17
+#define R_PAR1_STATUS_DATA__tr_rdy__WIDTH 1
+#define R_PAR1_STATUS_DATA__tr_rdy__ready 1
+#define R_PAR1_STATUS_DATA__tr_rdy__busy 0
+#define R_PAR1_STATUS_DATA__dav__BITNR 16
+#define R_PAR1_STATUS_DATA__dav__WIDTH 1
+#define R_PAR1_STATUS_DATA__dav__data 1
+#define R_PAR1_STATUS_DATA__dav__nodata 0
+#define R_PAR1_STATUS_DATA__ecp_cmd__BITNR 8
+#define R_PAR1_STATUS_DATA__ecp_cmd__WIDTH 1
+#define R_PAR1_STATUS_DATA__ecp_cmd__command 1
+#define R_PAR1_STATUS_DATA__ecp_cmd__data 0
+#define R_PAR1_STATUS_DATA__data__BITNR 0
+#define R_PAR1_STATUS_DATA__data__WIDTH 8
+
+#define R_PAR1_STATUS (IO_TYPECAST_RO_UWORD 0xb0000052)
+#define R_PAR1_STATUS__mode__BITNR 13
+#define R_PAR1_STATUS__mode__WIDTH 3
+#define R_PAR1_STATUS__mode__manual 0
+#define R_PAR1_STATUS__mode__centronics 1
+#define R_PAR1_STATUS__mode__fastbyte 2
+#define R_PAR1_STATUS__mode__nibble 3
+#define R_PAR1_STATUS__mode__byte 4
+#define R_PAR1_STATUS__mode__ecp_fwd 5
+#define R_PAR1_STATUS__mode__ecp_rev 6
+#define R_PAR1_STATUS__mode__off 7
+#define R_PAR1_STATUS__mode__epp_wr1 5
+#define R_PAR1_STATUS__mode__epp_wr2 6
+#define R_PAR1_STATUS__mode__epp_wr3 7
+#define R_PAR1_STATUS__mode__epp_rd 0
+#define R_PAR1_STATUS__perr__BITNR 12
+#define R_PAR1_STATUS__perr__WIDTH 1
+#define R_PAR1_STATUS__perr__active 1
+#define R_PAR1_STATUS__perr__inactive 0
+#define R_PAR1_STATUS__ack__BITNR 11
+#define R_PAR1_STATUS__ack__WIDTH 1
+#define R_PAR1_STATUS__ack__active 0
+#define R_PAR1_STATUS__ack__inactive 1
+#define R_PAR1_STATUS__busy__BITNR 10
+#define R_PAR1_STATUS__busy__WIDTH 1
+#define R_PAR1_STATUS__busy__active 1
+#define R_PAR1_STATUS__busy__inactive 0
+#define R_PAR1_STATUS__fault__BITNR 9
+#define R_PAR1_STATUS__fault__WIDTH 1
+#define R_PAR1_STATUS__fault__active 0
+#define R_PAR1_STATUS__fault__inactive 1
+#define R_PAR1_STATUS__sel__BITNR 8
+#define R_PAR1_STATUS__sel__WIDTH 1
+#define R_PAR1_STATUS__sel__active 1
+#define R_PAR1_STATUS__sel__inactive 0
+#define R_PAR1_STATUS__ext_mode__BITNR 7
+#define R_PAR1_STATUS__ext_mode__WIDTH 1
+#define R_PAR1_STATUS__ext_mode__enable 1
+#define R_PAR1_STATUS__ext_mode__disable 0
+#define R_PAR1_STATUS__tr_rdy__BITNR 1
+#define R_PAR1_STATUS__tr_rdy__WIDTH 1
+#define R_PAR1_STATUS__tr_rdy__ready 1
+#define R_PAR1_STATUS__tr_rdy__busy 0
+#define R_PAR1_STATUS__dav__BITNR 0
+#define R_PAR1_STATUS__dav__WIDTH 1
+#define R_PAR1_STATUS__dav__data 1
+#define R_PAR1_STATUS__dav__nodata 0
+
+#define R_PAR1_CONFIG (IO_TYPECAST_UDWORD 0xb0000054)
+#define R_PAR1_CONFIG__ioe__BITNR 25
+#define R_PAR1_CONFIG__ioe__WIDTH 1
+#define R_PAR1_CONFIG__ioe__inv 1
+#define R_PAR1_CONFIG__ioe__noninv 0
+#define R_PAR1_CONFIG__iseli__BITNR 24
+#define R_PAR1_CONFIG__iseli__WIDTH 1
+#define R_PAR1_CONFIG__iseli__inv 1
+#define R_PAR1_CONFIG__iseli__noninv 0
+#define R_PAR1_CONFIG__iautofd__BITNR 23
+#define R_PAR1_CONFIG__iautofd__WIDTH 1
+#define R_PAR1_CONFIG__iautofd__inv 1
+#define R_PAR1_CONFIG__iautofd__noninv 0
+#define R_PAR1_CONFIG__istrb__BITNR 22
+#define R_PAR1_CONFIG__istrb__WIDTH 1
+#define R_PAR1_CONFIG__istrb__inv 1
+#define R_PAR1_CONFIG__istrb__noninv 0
+#define R_PAR1_CONFIG__iinit__BITNR 21
+#define R_PAR1_CONFIG__iinit__WIDTH 1
+#define R_PAR1_CONFIG__iinit__inv 1
+#define R_PAR1_CONFIG__iinit__noninv 0
+#define R_PAR1_CONFIG__iperr__BITNR 20
+#define R_PAR1_CONFIG__iperr__WIDTH 1
+#define R_PAR1_CONFIG__iperr__inv 1
+#define R_PAR1_CONFIG__iperr__noninv 0
+#define R_PAR1_CONFIG__iack__BITNR 19
+#define R_PAR1_CONFIG__iack__WIDTH 1
+#define R_PAR1_CONFIG__iack__inv 1
+#define R_PAR1_CONFIG__iack__noninv 0
+#define R_PAR1_CONFIG__ibusy__BITNR 18
+#define R_PAR1_CONFIG__ibusy__WIDTH 1
+#define R_PAR1_CONFIG__ibusy__inv 1
+#define R_PAR1_CONFIG__ibusy__noninv 0
+#define R_PAR1_CONFIG__ifault__BITNR 17
+#define R_PAR1_CONFIG__ifault__WIDTH 1
+#define R_PAR1_CONFIG__ifault__inv 1
+#define R_PAR1_CONFIG__ifault__noninv 0
+#define R_PAR1_CONFIG__isel__BITNR 16
+#define R_PAR1_CONFIG__isel__WIDTH 1
+#define R_PAR1_CONFIG__isel__inv 1
+#define R_PAR1_CONFIG__isel__noninv 0
+#define R_PAR1_CONFIG__ext_mode__BITNR 11
+#define R_PAR1_CONFIG__ext_mode__WIDTH 1
+#define R_PAR1_CONFIG__ext_mode__enable 1
+#define R_PAR1_CONFIG__ext_mode__disable 0
+#define R_PAR1_CONFIG__dma__BITNR 9
+#define R_PAR1_CONFIG__dma__WIDTH 1
+#define R_PAR1_CONFIG__dma__enable 1
+#define R_PAR1_CONFIG__dma__disable 0
+#define R_PAR1_CONFIG__rle_in__BITNR 8
+#define R_PAR1_CONFIG__rle_in__WIDTH 1
+#define R_PAR1_CONFIG__rle_in__enable 1
+#define R_PAR1_CONFIG__rle_in__disable 0
+#define R_PAR1_CONFIG__rle_out__BITNR 7
+#define R_PAR1_CONFIG__rle_out__WIDTH 1
+#define R_PAR1_CONFIG__rle_out__enable 1
+#define R_PAR1_CONFIG__rle_out__disable 0
+#define R_PAR1_CONFIG__enable__BITNR 6
+#define R_PAR1_CONFIG__enable__WIDTH 1
+#define R_PAR1_CONFIG__enable__on 1
+#define R_PAR1_CONFIG__enable__reset 0
+#define R_PAR1_CONFIG__force__BITNR 5
+#define R_PAR1_CONFIG__force__WIDTH 1
+#define R_PAR1_CONFIG__force__on 1
+#define R_PAR1_CONFIG__force__off 0
+#define R_PAR1_CONFIG__ign_ack__BITNR 4
+#define R_PAR1_CONFIG__ign_ack__WIDTH 1
+#define R_PAR1_CONFIG__ign_ack__ignore 1
+#define R_PAR1_CONFIG__ign_ack__wait 0
+#define R_PAR1_CONFIG__oe_ack__BITNR 3
+#define R_PAR1_CONFIG__oe_ack__WIDTH 1
+#define R_PAR1_CONFIG__oe_ack__wait_oe 1
+#define R_PAR1_CONFIG__oe_ack__dont_wait 0
+#define R_PAR1_CONFIG__oe_ack__epp_addr 1
+#define R_PAR1_CONFIG__oe_ack__epp_data 0
+#define R_PAR1_CONFIG__epp_addr_data__BITNR 3
+#define R_PAR1_CONFIG__epp_addr_data__WIDTH 1
+#define R_PAR1_CONFIG__epp_addr_data__wait_oe 1
+#define R_PAR1_CONFIG__epp_addr_data__dont_wait 0
+#define R_PAR1_CONFIG__epp_addr_data__epp_addr 1
+#define R_PAR1_CONFIG__epp_addr_data__epp_data 0
+#define R_PAR1_CONFIG__mode__BITNR 0
+#define R_PAR1_CONFIG__mode__WIDTH 3
+#define R_PAR1_CONFIG__mode__manual 0
+#define R_PAR1_CONFIG__mode__centronics 1
+#define R_PAR1_CONFIG__mode__fastbyte 2
+#define R_PAR1_CONFIG__mode__nibble 3
+#define R_PAR1_CONFIG__mode__byte 4
+#define R_PAR1_CONFIG__mode__ecp_fwd 5
+#define R_PAR1_CONFIG__mode__ecp_rev 6
+#define R_PAR1_CONFIG__mode__off 7
+#define R_PAR1_CONFIG__mode__epp_wr1 5
+#define R_PAR1_CONFIG__mode__epp_wr2 6
+#define R_PAR1_CONFIG__mode__epp_wr3 7
+#define R_PAR1_CONFIG__mode__epp_rd 0
+
+#define R_PAR1_DELAY (IO_TYPECAST_UDWORD 0xb0000058)
+#define R_PAR1_DELAY__fine_hold__BITNR 21
+#define R_PAR1_DELAY__fine_hold__WIDTH 3
+#define R_PAR1_DELAY__hold__BITNR 16
+#define R_PAR1_DELAY__hold__WIDTH 5
+#define R_PAR1_DELAY__fine_strb__BITNR 13
+#define R_PAR1_DELAY__fine_strb__WIDTH 3
+#define R_PAR1_DELAY__strobe__BITNR 8
+#define R_PAR1_DELAY__strobe__WIDTH 5
+#define R_PAR1_DELAY__fine_setup__BITNR 5
+#define R_PAR1_DELAY__fine_setup__WIDTH 3
+#define R_PAR1_DELAY__setup__BITNR 0
+#define R_PAR1_DELAY__setup__WIDTH 5
+
+/*
+!* ATA interface registers
+!*/
+
+#define R_ATA_CTRL_DATA (IO_TYPECAST_UDWORD 0xb0000040)
+#define R_ATA_CTRL_DATA__sel__BITNR 30
+#define R_ATA_CTRL_DATA__sel__WIDTH 2
+#define R_ATA_CTRL_DATA__cs1__BITNR 29
+#define R_ATA_CTRL_DATA__cs1__WIDTH 1
+#define R_ATA_CTRL_DATA__cs1__active 1
+#define R_ATA_CTRL_DATA__cs1__inactive 0
+#define R_ATA_CTRL_DATA__cs0__BITNR 28
+#define R_ATA_CTRL_DATA__cs0__WIDTH 1
+#define R_ATA_CTRL_DATA__cs0__active 1
+#define R_ATA_CTRL_DATA__cs0__inactive 0
+#define R_ATA_CTRL_DATA__addr__BITNR 25
+#define R_ATA_CTRL_DATA__addr__WIDTH 3
+#define R_ATA_CTRL_DATA__rw__BITNR 24
+#define R_ATA_CTRL_DATA__rw__WIDTH 1
+#define R_ATA_CTRL_DATA__rw__read 1
+#define R_ATA_CTRL_DATA__rw__write 0
+#define R_ATA_CTRL_DATA__src_dst__BITNR 23
+#define R_ATA_CTRL_DATA__src_dst__WIDTH 1
+#define R_ATA_CTRL_DATA__src_dst__dma 1
+#define R_ATA_CTRL_DATA__src_dst__register 0
+#define R_ATA_CTRL_DATA__handsh__BITNR 22
+#define R_ATA_CTRL_DATA__handsh__WIDTH 1
+#define R_ATA_CTRL_DATA__handsh__dma 1
+#define R_ATA_CTRL_DATA__handsh__pio 0
+#define R_ATA_CTRL_DATA__multi__BITNR 21
+#define R_ATA_CTRL_DATA__multi__WIDTH 1
+#define R_ATA_CTRL_DATA__multi__on 1
+#define R_ATA_CTRL_DATA__multi__off 0
+#define R_ATA_CTRL_DATA__dma_size__BITNR 20
+#define R_ATA_CTRL_DATA__dma_size__WIDTH 1
+#define R_ATA_CTRL_DATA__dma_size__byte 1
+#define R_ATA_CTRL_DATA__dma_size__word 0
+#define R_ATA_CTRL_DATA__data__BITNR 0
+#define R_ATA_CTRL_DATA__data__WIDTH 16
+
+#define R_ATA_STATUS_DATA (IO_TYPECAST_RO_UDWORD 0xb0000040)
+#define R_ATA_STATUS_DATA__busy__BITNR 18
+#define R_ATA_STATUS_DATA__busy__WIDTH 1
+#define R_ATA_STATUS_DATA__busy__yes 1
+#define R_ATA_STATUS_DATA__busy__no 0
+#define R_ATA_STATUS_DATA__tr_rdy__BITNR 17
+#define R_ATA_STATUS_DATA__tr_rdy__WIDTH 1
+#define R_ATA_STATUS_DATA__tr_rdy__ready 1
+#define R_ATA_STATUS_DATA__tr_rdy__busy 0
+#define R_ATA_STATUS_DATA__dav__BITNR 16
+#define R_ATA_STATUS_DATA__dav__WIDTH 1
+#define R_ATA_STATUS_DATA__dav__data 1
+#define R_ATA_STATUS_DATA__dav__nodata 0
+#define R_ATA_STATUS_DATA__data__BITNR 0
+#define R_ATA_STATUS_DATA__data__WIDTH 16
+
+#define R_ATA_CONFIG (IO_TYPECAST_UDWORD 0xb0000044)
+#define R_ATA_CONFIG__enable__BITNR 25
+#define R_ATA_CONFIG__enable__WIDTH 1
+#define R_ATA_CONFIG__enable__on 1
+#define R_ATA_CONFIG__enable__off 0
+#define R_ATA_CONFIG__dma_strobe__BITNR 20
+#define R_ATA_CONFIG__dma_strobe__WIDTH 5
+#define R_ATA_CONFIG__dma_hold__BITNR 15
+#define R_ATA_CONFIG__dma_hold__WIDTH 5
+#define R_ATA_CONFIG__pio_setup__BITNR 10
+#define R_ATA_CONFIG__pio_setup__WIDTH 5
+#define R_ATA_CONFIG__pio_strobe__BITNR 5
+#define R_ATA_CONFIG__pio_strobe__WIDTH 5
+#define R_ATA_CONFIG__pio_hold__BITNR 0
+#define R_ATA_CONFIG__pio_hold__WIDTH 5
+
+#define R_ATA_TRANSFER_CNT (IO_TYPECAST_UDWORD 0xb0000048)
+#define R_ATA_TRANSFER_CNT__count__BITNR 0
+#define R_ATA_TRANSFER_CNT__count__WIDTH 17
+
+/*
+!* SCSI registers
+!*/
+
+#define R_SCSI0_CTRL (IO_TYPECAST_UDWORD 0xb0000044)
+#define R_SCSI0_CTRL__id_type__BITNR 31
+#define R_SCSI0_CTRL__id_type__WIDTH 1
+#define R_SCSI0_CTRL__id_type__software 1
+#define R_SCSI0_CTRL__id_type__hardware 0
+#define R_SCSI0_CTRL__sel_timeout__BITNR 24
+#define R_SCSI0_CTRL__sel_timeout__WIDTH 7
+#define R_SCSI0_CTRL__synch_per__BITNR 16
+#define R_SCSI0_CTRL__synch_per__WIDTH 8
+#define R_SCSI0_CTRL__rst__BITNR 15
+#define R_SCSI0_CTRL__rst__WIDTH 1
+#define R_SCSI0_CTRL__rst__yes 1
+#define R_SCSI0_CTRL__rst__no 0
+#define R_SCSI0_CTRL__atn__BITNR 14
+#define R_SCSI0_CTRL__atn__WIDTH 1
+#define R_SCSI0_CTRL__atn__yes 1
+#define R_SCSI0_CTRL__atn__no 0
+#define R_SCSI0_CTRL__my_id__BITNR 9
+#define R_SCSI0_CTRL__my_id__WIDTH 4
+#define R_SCSI0_CTRL__target_id__BITNR 4
+#define R_SCSI0_CTRL__target_id__WIDTH 4
+#define R_SCSI0_CTRL__fast_20__BITNR 3
+#define R_SCSI0_CTRL__fast_20__WIDTH 1
+#define R_SCSI0_CTRL__fast_20__yes 1
+#define R_SCSI0_CTRL__fast_20__no 0
+#define R_SCSI0_CTRL__bus_width__BITNR 2
+#define R_SCSI0_CTRL__bus_width__WIDTH 1
+#define R_SCSI0_CTRL__bus_width__wide 1
+#define R_SCSI0_CTRL__bus_width__narrow 0
+#define R_SCSI0_CTRL__synch__BITNR 1
+#define R_SCSI0_CTRL__synch__WIDTH 1
+#define R_SCSI0_CTRL__synch__synch 1
+#define R_SCSI0_CTRL__synch__asynch 0
+#define R_SCSI0_CTRL__enable__BITNR 0
+#define R_SCSI0_CTRL__enable__WIDTH 1
+#define R_SCSI0_CTRL__enable__on 1
+#define R_SCSI0_CTRL__enable__off 0
+
+#define R_SCSI0_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000040)
+#define R_SCSI0_CMD_DATA__parity_in__BITNR 26
+#define R_SCSI0_CMD_DATA__parity_in__WIDTH 1
+#define R_SCSI0_CMD_DATA__parity_in__on 0
+#define R_SCSI0_CMD_DATA__parity_in__off 1
+#define R_SCSI0_CMD_DATA__skip__BITNR 25
+#define R_SCSI0_CMD_DATA__skip__WIDTH 1
+#define R_SCSI0_CMD_DATA__skip__on 1
+#define R_SCSI0_CMD_DATA__skip__off 0
+#define R_SCSI0_CMD_DATA__clr_status__BITNR 24
+#define R_SCSI0_CMD_DATA__clr_status__WIDTH 1
+#define R_SCSI0_CMD_DATA__clr_status__yes 1
+#define R_SCSI0_CMD_DATA__clr_status__nop 0
+#define R_SCSI0_CMD_DATA__asynch_setup__BITNR 20
+#define R_SCSI0_CMD_DATA__asynch_setup__WIDTH 4
+#define R_SCSI0_CMD_DATA__command__BITNR 16
+#define R_SCSI0_CMD_DATA__command__WIDTH 4
+#define R_SCSI0_CMD_DATA__command__full_din_1 0
+#define R_SCSI0_CMD_DATA__command__full_dout_1 1
+#define R_SCSI0_CMD_DATA__command__full_stat_1 2
+#define R_SCSI0_CMD_DATA__command__resel_din 3
+#define R_SCSI0_CMD_DATA__command__resel_dout 4
+#define R_SCSI0_CMD_DATA__command__resel_stat 5
+#define R_SCSI0_CMD_DATA__command__arb_only 6
+#define R_SCSI0_CMD_DATA__command__full_din_3 8
+#define R_SCSI0_CMD_DATA__command__full_dout_3 9
+#define R_SCSI0_CMD_DATA__command__full_stat_3 10
+#define R_SCSI0_CMD_DATA__command__man_data_in 11
+#define R_SCSI0_CMD_DATA__command__man_data_out 12
+#define R_SCSI0_CMD_DATA__command__man_rat 13
+#define R_SCSI0_CMD_DATA__data_out__BITNR 0
+#define R_SCSI0_CMD_DATA__data_out__WIDTH 16
+
+#define R_SCSI0_DATA (IO_TYPECAST_UWORD 0xb0000040)
+#define R_SCSI0_DATA__data_out__BITNR 0
+#define R_SCSI0_DATA__data_out__WIDTH 16
+
+#define R_SCSI0_CMD (IO_TYPECAST_BYTE 0xb0000042)
+#define R_SCSI0_CMD__asynch_setup__BITNR 4
+#define R_SCSI0_CMD__asynch_setup__WIDTH 4
+#define R_SCSI0_CMD__command__BITNR 0
+#define R_SCSI0_CMD__command__WIDTH 4
+#define R_SCSI0_CMD__command__full_din_1 0
+#define R_SCSI0_CMD__command__full_dout_1 1
+#define R_SCSI0_CMD__command__full_stat_1 2
+#define R_SCSI0_CMD__command__resel_din 3
+#define R_SCSI0_CMD__command__resel_dout 4
+#define R_SCSI0_CMD__command__resel_stat 5
+#define R_SCSI0_CMD__command__arb_only 6
+#define R_SCSI0_CMD__command__full_din_3 8
+#define R_SCSI0_CMD__command__full_dout_3 9
+#define R_SCSI0_CMD__command__full_stat_3 10
+#define R_SCSI0_CMD__command__man_data_in 11
+#define R_SCSI0_CMD__command__man_data_out 12
+#define R_SCSI0_CMD__command__man_rat 13
+
+#define R_SCSI0_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000043)
+#define R_SCSI0_STATUS_CTRL__parity_in__BITNR 2
+#define R_SCSI0_STATUS_CTRL__parity_in__WIDTH 1
+#define R_SCSI0_STATUS_CTRL__parity_in__on 0
+#define R_SCSI0_STATUS_CTRL__parity_in__off 1
+#define R_SCSI0_STATUS_CTRL__skip__BITNR 1
+#define R_SCSI0_STATUS_CTRL__skip__WIDTH 1
+#define R_SCSI0_STATUS_CTRL__skip__on 1
+#define R_SCSI0_STATUS_CTRL__skip__off 0
+#define R_SCSI0_STATUS_CTRL__clr_status__BITNR 0
+#define R_SCSI0_STATUS_CTRL__clr_status__WIDTH 1
+#define R_SCSI0_STATUS_CTRL__clr_status__yes 1
+#define R_SCSI0_STATUS_CTRL__clr_status__nop 0
+
+#define R_SCSI0_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000048)
+#define R_SCSI0_STATUS__tst_arb_won__BITNR 23
+#define R_SCSI0_STATUS__tst_arb_won__WIDTH 1
+#define R_SCSI0_STATUS__tst_resel__BITNR 22
+#define R_SCSI0_STATUS__tst_resel__WIDTH 1
+#define R_SCSI0_STATUS__parity_error__BITNR 21
+#define R_SCSI0_STATUS__parity_error__WIDTH 1
+#define R_SCSI0_STATUS__bus_reset__BITNR 20
+#define R_SCSI0_STATUS__bus_reset__WIDTH 1
+#define R_SCSI0_STATUS__bus_reset__yes 1
+#define R_SCSI0_STATUS__bus_reset__no 0
+#define R_SCSI0_STATUS__resel_target__BITNR 15
+#define R_SCSI0_STATUS__resel_target__WIDTH 4
+#define R_SCSI0_STATUS__resel__BITNR 14
+#define R_SCSI0_STATUS__resel__WIDTH 1
+#define R_SCSI0_STATUS__resel__yes 1
+#define R_SCSI0_STATUS__resel__no 0
+#define R_SCSI0_STATUS__curr_phase__BITNR 11
+#define R_SCSI0_STATUS__curr_phase__WIDTH 3
+#define R_SCSI0_STATUS__curr_phase__ph_undef 0
+#define R_SCSI0_STATUS__curr_phase__ph_msg_in 7
+#define R_SCSI0_STATUS__curr_phase__ph_msg_out 6
+#define R_SCSI0_STATUS__curr_phase__ph_status 3
+#define R_SCSI0_STATUS__curr_phase__ph_command 2
+#define R_SCSI0_STATUS__curr_phase__ph_data_in 5
+#define R_SCSI0_STATUS__curr_phase__ph_data_out 4
+#define R_SCSI0_STATUS__curr_phase__ph_resel 1
+#define R_SCSI0_STATUS__last_seq_step__BITNR 6
+#define R_SCSI0_STATUS__last_seq_step__WIDTH 5
+#define R_SCSI0_STATUS__last_seq_step__st_bus_free 24
+#define R_SCSI0_STATUS__last_seq_step__st_arbitrate 8
+#define R_SCSI0_STATUS__last_seq_step__st_resel_req 29
+#define R_SCSI0_STATUS__last_seq_step__st_msg_1 2
+#define R_SCSI0_STATUS__last_seq_step__st_manual 28
+#define R_SCSI0_STATUS__last_seq_step__st_transf_cmd 30
+#define R_SCSI0_STATUS__last_seq_step__st_msg_2 6
+#define R_SCSI0_STATUS__last_seq_step__st_msg_3 22
+#define R_SCSI0_STATUS__last_seq_step__st_answer 3
+#define R_SCSI0_STATUS__last_seq_step__st_synch_din_perr 1
+#define R_SCSI0_STATUS__last_seq_step__st_transfer_done 15
+#define R_SCSI0_STATUS__last_seq_step__st_synch_dout 0
+#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout 25
+#define R_SCSI0_STATUS__last_seq_step__st_synch_din 13
+#define R_SCSI0_STATUS__last_seq_step__st_asynch_din 9
+#define R_SCSI0_STATUS__last_seq_step__st_synch_dout_ack 4
+#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack 12
+#define R_SCSI0_STATUS__last_seq_step__st_synch_din_ack_perr 5
+#define R_SCSI0_STATUS__last_seq_step__st_asynch_dout_end 11
+#define R_SCSI0_STATUS__last_seq_step__st_iwr 27
+#define R_SCSI0_STATUS__last_seq_step__st_wait_free_disc 21
+#define R_SCSI0_STATUS__last_seq_step__st_sdp_disc 7
+#define R_SCSI0_STATUS__last_seq_step__st_cc 31
+#define R_SCSI0_STATUS__last_seq_step__st_iwr_good 14
+#define R_SCSI0_STATUS__last_seq_step__st_iwr_cc 23
+#define R_SCSI0_STATUS__last_seq_step__st_wait_free_iwr_cc 17
+#define R_SCSI0_STATUS__last_seq_step__st_wait_free_cc 20
+#define R_SCSI0_STATUS__last_seq_step__st_wait_free_sdp_disc 16
+#define R_SCSI0_STATUS__last_seq_step__st_manual_req 10
+#define R_SCSI0_STATUS__last_seq_step__st_manual_din_prot 18
+#define R_SCSI0_STATUS__valid_status__BITNR 5
+#define R_SCSI0_STATUS__valid_status__WIDTH 1
+#define R_SCSI0_STATUS__valid_status__yes 1
+#define R_SCSI0_STATUS__valid_status__no 0
+#define R_SCSI0_STATUS__seq_status__BITNR 0
+#define R_SCSI0_STATUS__seq_status__WIDTH 5
+#define R_SCSI0_STATUS__seq_status__info_seq_complete 0
+#define R_SCSI0_STATUS__seq_status__info_parity_error 1
+#define R_SCSI0_STATUS__seq_status__info_unhandled_msg_in 2
+#define R_SCSI0_STATUS__seq_status__info_unexp_ph_change 3
+#define R_SCSI0_STATUS__seq_status__info_arb_lost 4
+#define R_SCSI0_STATUS__seq_status__info_sel_timeout 5
+#define R_SCSI0_STATUS__seq_status__info_unexp_bf 6
+#define R_SCSI0_STATUS__seq_status__info_illegal_op 7
+#define R_SCSI0_STATUS__seq_status__info_rec_recvd 8
+#define R_SCSI0_STATUS__seq_status__info_reselected 9
+#define R_SCSI0_STATUS__seq_status__info_unhandled_status 10
+#define R_SCSI0_STATUS__seq_status__info_bus_reset 11
+#define R_SCSI0_STATUS__seq_status__info_illegal_bf 12
+#define R_SCSI0_STATUS__seq_status__info_bus_free 13
+
+#define R_SCSI0_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000040)
+#define R_SCSI0_DATA_IN__data_in__BITNR 0
+#define R_SCSI0_DATA_IN__data_in__WIDTH 16
+
+#define R_SCSI1_CTRL (IO_TYPECAST_UDWORD 0xb0000054)
+#define R_SCSI1_CTRL__id_type__BITNR 31
+#define R_SCSI1_CTRL__id_type__WIDTH 1
+#define R_SCSI1_CTRL__id_type__software 1
+#define R_SCSI1_CTRL__id_type__hardware 0
+#define R_SCSI1_CTRL__sel_timeout__BITNR 24
+#define R_SCSI1_CTRL__sel_timeout__WIDTH 7
+#define R_SCSI1_CTRL__synch_per__BITNR 16
+#define R_SCSI1_CTRL__synch_per__WIDTH 8
+#define R_SCSI1_CTRL__rst__BITNR 15
+#define R_SCSI1_CTRL__rst__WIDTH 1
+#define R_SCSI1_CTRL__rst__yes 1
+#define R_SCSI1_CTRL__rst__no 0
+#define R_SCSI1_CTRL__atn__BITNR 14
+#define R_SCSI1_CTRL__atn__WIDTH 1
+#define R_SCSI1_CTRL__atn__yes 1
+#define R_SCSI1_CTRL__atn__no 0
+#define R_SCSI1_CTRL__my_id__BITNR 9
+#define R_SCSI1_CTRL__my_id__WIDTH 4
+#define R_SCSI1_CTRL__target_id__BITNR 4
+#define R_SCSI1_CTRL__target_id__WIDTH 4
+#define R_SCSI1_CTRL__fast_20__BITNR 3
+#define R_SCSI1_CTRL__fast_20__WIDTH 1
+#define R_SCSI1_CTRL__fast_20__yes 1
+#define R_SCSI1_CTRL__fast_20__no 0
+#define R_SCSI1_CTRL__bus_width__BITNR 2
+#define R_SCSI1_CTRL__bus_width__WIDTH 1
+#define R_SCSI1_CTRL__bus_width__wide 1
+#define R_SCSI1_CTRL__bus_width__narrow 0
+#define R_SCSI1_CTRL__synch__BITNR 1
+#define R_SCSI1_CTRL__synch__WIDTH 1
+#define R_SCSI1_CTRL__synch__synch 1
+#define R_SCSI1_CTRL__synch__asynch 0
+#define R_SCSI1_CTRL__enable__BITNR 0
+#define R_SCSI1_CTRL__enable__WIDTH 1
+#define R_SCSI1_CTRL__enable__on 1
+#define R_SCSI1_CTRL__enable__off 0
+
+#define R_SCSI1_CMD_DATA (IO_TYPECAST_UDWORD 0xb0000050)
+#define R_SCSI1_CMD_DATA__parity_in__BITNR 26
+#define R_SCSI1_CMD_DATA__parity_in__WIDTH 1
+#define R_SCSI1_CMD_DATA__parity_in__on 0
+#define R_SCSI1_CMD_DATA__parity_in__off 1
+#define R_SCSI1_CMD_DATA__skip__BITNR 25
+#define R_SCSI1_CMD_DATA__skip__WIDTH 1
+#define R_SCSI1_CMD_DATA__skip__on 1
+#define R_SCSI1_CMD_DATA__skip__off 0
+#define R_SCSI1_CMD_DATA__clr_status__BITNR 24
+#define R_SCSI1_CMD_DATA__clr_status__WIDTH 1
+#define R_SCSI1_CMD_DATA__clr_status__yes 1
+#define R_SCSI1_CMD_DATA__clr_status__nop 0
+#define R_SCSI1_CMD_DATA__asynch_setup__BITNR 20
+#define R_SCSI1_CMD_DATA__asynch_setup__WIDTH 4
+#define R_SCSI1_CMD_DATA__command__BITNR 16
+#define R_SCSI1_CMD_DATA__command__WIDTH 4
+#define R_SCSI1_CMD_DATA__command__full_din_1 0
+#define R_SCSI1_CMD_DATA__command__full_dout_1 1
+#define R_SCSI1_CMD_DATA__command__full_stat_1 2
+#define R_SCSI1_CMD_DATA__command__resel_din 3
+#define R_SCSI1_CMD_DATA__command__resel_dout 4
+#define R_SCSI1_CMD_DATA__command__resel_stat 5
+#define R_SCSI1_CMD_DATA__command__arb_only 6
+#define R_SCSI1_CMD_DATA__command__full_din_3 8
+#define R_SCSI1_CMD_DATA__command__full_dout_3 9
+#define R_SCSI1_CMD_DATA__command__full_stat_3 10
+#define R_SCSI1_CMD_DATA__command__man_data_in 11
+#define R_SCSI1_CMD_DATA__command__man_data_out 12
+#define R_SCSI1_CMD_DATA__command__man_rat 13
+#define R_SCSI1_CMD_DATA__data_out__BITNR 0
+#define R_SCSI1_CMD_DATA__data_out__WIDTH 16
+
+#define R_SCSI1_DATA (IO_TYPECAST_UWORD 0xb0000050)
+#define R_SCSI1_DATA__data_out__BITNR 0
+#define R_SCSI1_DATA__data_out__WIDTH 16
+
+#define R_SCSI1_CMD (IO_TYPECAST_BYTE 0xb0000052)
+#define R_SCSI1_CMD__asynch_setup__BITNR 4
+#define R_SCSI1_CMD__asynch_setup__WIDTH 4
+#define R_SCSI1_CMD__command__BITNR 0
+#define R_SCSI1_CMD__command__WIDTH 4
+#define R_SCSI1_CMD__command__full_din_1 0
+#define R_SCSI1_CMD__command__full_dout_1 1
+#define R_SCSI1_CMD__command__full_stat_1 2
+#define R_SCSI1_CMD__command__resel_din 3
+#define R_SCSI1_CMD__command__resel_dout 4
+#define R_SCSI1_CMD__command__resel_stat 5
+#define R_SCSI1_CMD__command__arb_only 6
+#define R_SCSI1_CMD__command__full_din_3 8
+#define R_SCSI1_CMD__command__full_dout_3 9
+#define R_SCSI1_CMD__command__full_stat_3 10
+#define R_SCSI1_CMD__command__man_data_in 11
+#define R_SCSI1_CMD__command__man_data_out 12
+#define R_SCSI1_CMD__command__man_rat 13
+
+#define R_SCSI1_STATUS_CTRL (IO_TYPECAST_BYTE 0xb0000053)
+#define R_SCSI1_STATUS_CTRL__parity_in__BITNR 2
+#define R_SCSI1_STATUS_CTRL__parity_in__WIDTH 1
+#define R_SCSI1_STATUS_CTRL__parity_in__on 0
+#define R_SCSI1_STATUS_CTRL__parity_in__off 1
+#define R_SCSI1_STATUS_CTRL__skip__BITNR 1
+#define R_SCSI1_STATUS_CTRL__skip__WIDTH 1
+#define R_SCSI1_STATUS_CTRL__skip__on 1
+#define R_SCSI1_STATUS_CTRL__skip__off 0
+#define R_SCSI1_STATUS_CTRL__clr_status__BITNR 0
+#define R_SCSI1_STATUS_CTRL__clr_status__WIDTH 1
+#define R_SCSI1_STATUS_CTRL__clr_status__yes 1
+#define R_SCSI1_STATUS_CTRL__clr_status__nop 0
+
+#define R_SCSI1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000058)
+#define R_SCSI1_STATUS__tst_arb_won__BITNR 23
+#define R_SCSI1_STATUS__tst_arb_won__WIDTH 1
+#define R_SCSI1_STATUS__tst_resel__BITNR 22
+#define R_SCSI1_STATUS__tst_resel__WIDTH 1
+#define R_SCSI1_STATUS__parity_error__BITNR 21
+#define R_SCSI1_STATUS__parity_error__WIDTH 1
+#define R_SCSI1_STATUS__bus_reset__BITNR 20
+#define R_SCSI1_STATUS__bus_reset__WIDTH 1
+#define R_SCSI1_STATUS__bus_reset__yes 1
+#define R_SCSI1_STATUS__bus_reset__no 0
+#define R_SCSI1_STATUS__resel_target__BITNR 15
+#define R_SCSI1_STATUS__resel_target__WIDTH 4
+#define R_SCSI1_STATUS__resel__BITNR 14
+#define R_SCSI1_STATUS__resel__WIDTH 1
+#define R_SCSI1_STATUS__resel__yes 1
+#define R_SCSI1_STATUS__resel__no 0
+#define R_SCSI1_STATUS__curr_phase__BITNR 11
+#define R_SCSI1_STATUS__curr_phase__WIDTH 3
+#define R_SCSI1_STATUS__curr_phase__ph_undef 0
+#define R_SCSI1_STATUS__curr_phase__ph_msg_in 7
+#define R_SCSI1_STATUS__curr_phase__ph_msg_out 6
+#define R_SCSI1_STATUS__curr_phase__ph_status 3
+#define R_SCSI1_STATUS__curr_phase__ph_command 2
+#define R_SCSI1_STATUS__curr_phase__ph_data_in 5
+#define R_SCSI1_STATUS__curr_phase__ph_data_out 4
+#define R_SCSI1_STATUS__curr_phase__ph_resel 1
+#define R_SCSI1_STATUS__last_seq_step__BITNR 6
+#define R_SCSI1_STATUS__last_seq_step__WIDTH 5
+#define R_SCSI1_STATUS__last_seq_step__st_bus_free 24
+#define R_SCSI1_STATUS__last_seq_step__st_arbitrate 8
+#define R_SCSI1_STATUS__last_seq_step__st_resel_req 29
+#define R_SCSI1_STATUS__last_seq_step__st_msg_1 2
+#define R_SCSI1_STATUS__last_seq_step__st_manual 28
+#define R_SCSI1_STATUS__last_seq_step__st_transf_cmd 30
+#define R_SCSI1_STATUS__last_seq_step__st_msg_2 6
+#define R_SCSI1_STATUS__last_seq_step__st_msg_3 22
+#define R_SCSI1_STATUS__last_seq_step__st_answer 3
+#define R_SCSI1_STATUS__last_seq_step__st_synch_din_perr 1
+#define R_SCSI1_STATUS__last_seq_step__st_transfer_done 15
+#define R_SCSI1_STATUS__last_seq_step__st_synch_dout 0
+#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout 25
+#define R_SCSI1_STATUS__last_seq_step__st_synch_din 13
+#define R_SCSI1_STATUS__last_seq_step__st_asynch_din 9
+#define R_SCSI1_STATUS__last_seq_step__st_synch_dout_ack 4
+#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack 12
+#define R_SCSI1_STATUS__last_seq_step__st_synch_din_ack_perr 5
+#define R_SCSI1_STATUS__last_seq_step__st_asynch_dout_end 11
+#define R_SCSI1_STATUS__last_seq_step__st_iwr 27
+#define R_SCSI1_STATUS__last_seq_step__st_wait_free_disc 21
+#define R_SCSI1_STATUS__last_seq_step__st_sdp_disc 7
+#define R_SCSI1_STATUS__last_seq_step__st_cc 31
+#define R_SCSI1_STATUS__last_seq_step__st_iwr_good 14
+#define R_SCSI1_STATUS__last_seq_step__st_iwr_cc 23
+#define R_SCSI1_STATUS__last_seq_step__st_wait_free_iwr_cc 17
+#define R_SCSI1_STATUS__last_seq_step__st_wait_free_cc 20
+#define R_SCSI1_STATUS__last_seq_step__st_wait_free_sdp_disc 16
+#define R_SCSI1_STATUS__last_seq_step__st_manual_req 10
+#define R_SCSI1_STATUS__last_seq_step__st_manual_din_prot 18
+#define R_SCSI1_STATUS__valid_status__BITNR 5
+#define R_SCSI1_STATUS__valid_status__WIDTH 1
+#define R_SCSI1_STATUS__valid_status__yes 1
+#define R_SCSI1_STATUS__valid_status__no 0
+#define R_SCSI1_STATUS__seq_status__BITNR 0
+#define R_SCSI1_STATUS__seq_status__WIDTH 5
+#define R_SCSI1_STATUS__seq_status__info_seq_complete 0
+#define R_SCSI1_STATUS__seq_status__info_parity_error 1
+#define R_SCSI1_STATUS__seq_status__info_unhandled_msg_in 2
+#define R_SCSI1_STATUS__seq_status__info_unexp_ph_change 3
+#define R_SCSI1_STATUS__seq_status__info_arb_lost 4
+#define R_SCSI1_STATUS__seq_status__info_sel_timeout 5
+#define R_SCSI1_STATUS__seq_status__info_unexp_bf 6
+#define R_SCSI1_STATUS__seq_status__info_illegal_op 7
+#define R_SCSI1_STATUS__seq_status__info_rec_recvd 8
+#define R_SCSI1_STATUS__seq_status__info_reselected 9
+#define R_SCSI1_STATUS__seq_status__info_unhandled_status 10
+#define R_SCSI1_STATUS__seq_status__info_bus_reset 11
+#define R_SCSI1_STATUS__seq_status__info_illegal_bf 12
+#define R_SCSI1_STATUS__seq_status__info_bus_free 13
+
+#define R_SCSI1_DATA_IN (IO_TYPECAST_RO_UWORD 0xb0000050)
+#define R_SCSI1_DATA_IN__data_in__BITNR 0
+#define R_SCSI1_DATA_IN__data_in__WIDTH 16
+
+/*
+!* Interrupt mask and status registers
+!*/
+
+#define R_IRQ_MASK0_RD (IO_TYPECAST_RO_UDWORD 0xb00000c0)
+#define R_IRQ_MASK0_RD__nmi_pin__BITNR 31
+#define R_IRQ_MASK0_RD__nmi_pin__WIDTH 1
+#define R_IRQ_MASK0_RD__nmi_pin__active 1
+#define R_IRQ_MASK0_RD__nmi_pin__inactive 0
+#define R_IRQ_MASK0_RD__watchdog_nmi__BITNR 30
+#define R_IRQ_MASK0_RD__watchdog_nmi__WIDTH 1
+#define R_IRQ_MASK0_RD__watchdog_nmi__active 1
+#define R_IRQ_MASK0_RD__watchdog_nmi__inactive 0
+#define R_IRQ_MASK0_RD__sqe_test_error__BITNR 29
+#define R_IRQ_MASK0_RD__sqe_test_error__WIDTH 1
+#define R_IRQ_MASK0_RD__sqe_test_error__active 1
+#define R_IRQ_MASK0_RD__sqe_test_error__inactive 0
+#define R_IRQ_MASK0_RD__carrier_loss__BITNR 28
+#define R_IRQ_MASK0_RD__carrier_loss__WIDTH 1
+#define R_IRQ_MASK0_RD__carrier_loss__active 1
+#define R_IRQ_MASK0_RD__carrier_loss__inactive 0
+#define R_IRQ_MASK0_RD__deferred__BITNR 27
+#define R_IRQ_MASK0_RD__deferred__WIDTH 1
+#define R_IRQ_MASK0_RD__deferred__active 1
+#define R_IRQ_MASK0_RD__deferred__inactive 0
+#define R_IRQ_MASK0_RD__late_col__BITNR 26
+#define R_IRQ_MASK0_RD__late_col__WIDTH 1
+#define R_IRQ_MASK0_RD__late_col__active 1
+#define R_IRQ_MASK0_RD__late_col__inactive 0
+#define R_IRQ_MASK0_RD__multiple_col__BITNR 25
+#define R_IRQ_MASK0_RD__multiple_col__WIDTH 1
+#define R_IRQ_MASK0_RD__multiple_col__active 1
+#define R_IRQ_MASK0_RD__multiple_col__inactive 0
+#define R_IRQ_MASK0_RD__single_col__BITNR 24
+#define R_IRQ_MASK0_RD__single_col__WIDTH 1
+#define R_IRQ_MASK0_RD__single_col__active 1
+#define R_IRQ_MASK0_RD__single_col__inactive 0
+#define R_IRQ_MASK0_RD__congestion__BITNR 23
+#define R_IRQ_MASK0_RD__congestion__WIDTH 1
+#define R_IRQ_MASK0_RD__congestion__active 1
+#define R_IRQ_MASK0_RD__congestion__inactive 0
+#define R_IRQ_MASK0_RD__oversize__BITNR 22
+#define R_IRQ_MASK0_RD__oversize__WIDTH 1
+#define R_IRQ_MASK0_RD__oversize__active 1
+#define R_IRQ_MASK0_RD__oversize__inactive 0
+#define R_IRQ_MASK0_RD__alignment_error__BITNR 21
+#define R_IRQ_MASK0_RD__alignment_error__WIDTH 1
+#define R_IRQ_MASK0_RD__alignment_error__active 1
+#define R_IRQ_MASK0_RD__alignment_error__inactive 0
+#define R_IRQ_MASK0_RD__crc_error__BITNR 20
+#define R_IRQ_MASK0_RD__crc_error__WIDTH 1
+#define R_IRQ_MASK0_RD__crc_error__active 1
+#define R_IRQ_MASK0_RD__crc_error__inactive 0
+#define R_IRQ_MASK0_RD__overrun__BITNR 19
+#define R_IRQ_MASK0_RD__overrun__WIDTH 1
+#define R_IRQ_MASK0_RD__overrun__active 1
+#define R_IRQ_MASK0_RD__overrun__inactive 0
+#define R_IRQ_MASK0_RD__underrun__BITNR 18
+#define R_IRQ_MASK0_RD__underrun__WIDTH 1
+#define R_IRQ_MASK0_RD__underrun__active 1
+#define R_IRQ_MASK0_RD__underrun__inactive 0
+#define R_IRQ_MASK0_RD__excessive_col__BITNR 17
+#define R_IRQ_MASK0_RD__excessive_col__WIDTH 1
+#define R_IRQ_MASK0_RD__excessive_col__active 1
+#define R_IRQ_MASK0_RD__excessive_col__inactive 0
+#define R_IRQ_MASK0_RD__mdio__BITNR 16
+#define R_IRQ_MASK0_RD__mdio__WIDTH 1
+#define R_IRQ_MASK0_RD__mdio__active 1
+#define R_IRQ_MASK0_RD__mdio__inactive 0
+#define R_IRQ_MASK0_RD__ata_drq3__BITNR 15
+#define R_IRQ_MASK0_RD__ata_drq3__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_drq3__active 1
+#define R_IRQ_MASK0_RD__ata_drq3__inactive 0
+#define R_IRQ_MASK0_RD__ata_drq2__BITNR 14
+#define R_IRQ_MASK0_RD__ata_drq2__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_drq2__active 1
+#define R_IRQ_MASK0_RD__ata_drq2__inactive 0
+#define R_IRQ_MASK0_RD__ata_drq1__BITNR 13
+#define R_IRQ_MASK0_RD__ata_drq1__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_drq1__active 1
+#define R_IRQ_MASK0_RD__ata_drq1__inactive 0
+#define R_IRQ_MASK0_RD__ata_drq0__BITNR 12
+#define R_IRQ_MASK0_RD__ata_drq0__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_drq0__active 1
+#define R_IRQ_MASK0_RD__ata_drq0__inactive 0
+#define R_IRQ_MASK0_RD__par0_ecp_cmd__BITNR 11
+#define R_IRQ_MASK0_RD__par0_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK0_RD__par0_ecp_cmd__active 1
+#define R_IRQ_MASK0_RD__par0_ecp_cmd__inactive 0
+#define R_IRQ_MASK0_RD__ata_irq3__BITNR 11
+#define R_IRQ_MASK0_RD__ata_irq3__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_irq3__active 1
+#define R_IRQ_MASK0_RD__ata_irq3__inactive 0
+#define R_IRQ_MASK0_RD__par0_peri__BITNR 10
+#define R_IRQ_MASK0_RD__par0_peri__WIDTH 1
+#define R_IRQ_MASK0_RD__par0_peri__active 1
+#define R_IRQ_MASK0_RD__par0_peri__inactive 0
+#define R_IRQ_MASK0_RD__ata_irq2__BITNR 10
+#define R_IRQ_MASK0_RD__ata_irq2__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_irq2__active 1
+#define R_IRQ_MASK0_RD__ata_irq2__inactive 0
+#define R_IRQ_MASK0_RD__par0_data__BITNR 9
+#define R_IRQ_MASK0_RD__par0_data__WIDTH 1
+#define R_IRQ_MASK0_RD__par0_data__active 1
+#define R_IRQ_MASK0_RD__par0_data__inactive 0
+#define R_IRQ_MASK0_RD__ata_irq1__BITNR 9
+#define R_IRQ_MASK0_RD__ata_irq1__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_irq1__active 1
+#define R_IRQ_MASK0_RD__ata_irq1__inactive 0
+#define R_IRQ_MASK0_RD__par0_ready__BITNR 8
+#define R_IRQ_MASK0_RD__par0_ready__WIDTH 1
+#define R_IRQ_MASK0_RD__par0_ready__active 1
+#define R_IRQ_MASK0_RD__par0_ready__inactive 0
+#define R_IRQ_MASK0_RD__ata_irq0__BITNR 8
+#define R_IRQ_MASK0_RD__ata_irq0__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_irq0__active 1
+#define R_IRQ_MASK0_RD__ata_irq0__inactive 0
+#define R_IRQ_MASK0_RD__mio__BITNR 8
+#define R_IRQ_MASK0_RD__mio__WIDTH 1
+#define R_IRQ_MASK0_RD__mio__active 1
+#define R_IRQ_MASK0_RD__mio__inactive 0
+#define R_IRQ_MASK0_RD__scsi0__BITNR 8
+#define R_IRQ_MASK0_RD__scsi0__WIDTH 1
+#define R_IRQ_MASK0_RD__scsi0__active 1
+#define R_IRQ_MASK0_RD__scsi0__inactive 0
+#define R_IRQ_MASK0_RD__ata_dmaend__BITNR 7
+#define R_IRQ_MASK0_RD__ata_dmaend__WIDTH 1
+#define R_IRQ_MASK0_RD__ata_dmaend__active 1
+#define R_IRQ_MASK0_RD__ata_dmaend__inactive 0
+#define R_IRQ_MASK0_RD__irq_ext_vector_nr__BITNR 5
+#define R_IRQ_MASK0_RD__irq_ext_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_RD__irq_ext_vector_nr__active 1
+#define R_IRQ_MASK0_RD__irq_ext_vector_nr__inactive 0
+#define R_IRQ_MASK0_RD__irq_int_vector_nr__BITNR 4
+#define R_IRQ_MASK0_RD__irq_int_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_RD__irq_int_vector_nr__active 1
+#define R_IRQ_MASK0_RD__irq_int_vector_nr__inactive 0
+#define R_IRQ_MASK0_RD__ext_dma1__BITNR 3
+#define R_IRQ_MASK0_RD__ext_dma1__WIDTH 1
+#define R_IRQ_MASK0_RD__ext_dma1__active 1
+#define R_IRQ_MASK0_RD__ext_dma1__inactive 0
+#define R_IRQ_MASK0_RD__ext_dma0__BITNR 2
+#define R_IRQ_MASK0_RD__ext_dma0__WIDTH 1
+#define R_IRQ_MASK0_RD__ext_dma0__active 1
+#define R_IRQ_MASK0_RD__ext_dma0__inactive 0
+#define R_IRQ_MASK0_RD__timer1__BITNR 1
+#define R_IRQ_MASK0_RD__timer1__WIDTH 1
+#define R_IRQ_MASK0_RD__timer1__active 1
+#define R_IRQ_MASK0_RD__timer1__inactive 0
+#define R_IRQ_MASK0_RD__timer0__BITNR 0
+#define R_IRQ_MASK0_RD__timer0__WIDTH 1
+#define R_IRQ_MASK0_RD__timer0__active 1
+#define R_IRQ_MASK0_RD__timer0__inactive 0
+
+#define R_IRQ_MASK0_CLR (IO_TYPECAST_UDWORD 0xb00000c0)
+#define R_IRQ_MASK0_CLR__nmi_pin__BITNR 31
+#define R_IRQ_MASK0_CLR__nmi_pin__WIDTH 1
+#define R_IRQ_MASK0_CLR__nmi_pin__clr 1
+#define R_IRQ_MASK0_CLR__nmi_pin__nop 0
+#define R_IRQ_MASK0_CLR__watchdog_nmi__BITNR 30
+#define R_IRQ_MASK0_CLR__watchdog_nmi__WIDTH 1
+#define R_IRQ_MASK0_CLR__watchdog_nmi__clr 1
+#define R_IRQ_MASK0_CLR__watchdog_nmi__nop 0
+#define R_IRQ_MASK0_CLR__sqe_test_error__BITNR 29
+#define R_IRQ_MASK0_CLR__sqe_test_error__WIDTH 1
+#define R_IRQ_MASK0_CLR__sqe_test_error__clr 1
+#define R_IRQ_MASK0_CLR__sqe_test_error__nop 0
+#define R_IRQ_MASK0_CLR__carrier_loss__BITNR 28
+#define R_IRQ_MASK0_CLR__carrier_loss__WIDTH 1
+#define R_IRQ_MASK0_CLR__carrier_loss__clr 1
+#define R_IRQ_MASK0_CLR__carrier_loss__nop 0
+#define R_IRQ_MASK0_CLR__deferred__BITNR 27
+#define R_IRQ_MASK0_CLR__deferred__WIDTH 1
+#define R_IRQ_MASK0_CLR__deferred__clr 1
+#define R_IRQ_MASK0_CLR__deferred__nop 0
+#define R_IRQ_MASK0_CLR__late_col__BITNR 26
+#define R_IRQ_MASK0_CLR__late_col__WIDTH 1
+#define R_IRQ_MASK0_CLR__late_col__clr 1
+#define R_IRQ_MASK0_CLR__late_col__nop 0
+#define R_IRQ_MASK0_CLR__multiple_col__BITNR 25
+#define R_IRQ_MASK0_CLR__multiple_col__WIDTH 1
+#define R_IRQ_MASK0_CLR__multiple_col__clr 1
+#define R_IRQ_MASK0_CLR__multiple_col__nop 0
+#define R_IRQ_MASK0_CLR__single_col__BITNR 24
+#define R_IRQ_MASK0_CLR__single_col__WIDTH 1
+#define R_IRQ_MASK0_CLR__single_col__clr 1
+#define R_IRQ_MASK0_CLR__single_col__nop 0
+#define R_IRQ_MASK0_CLR__congestion__BITNR 23
+#define R_IRQ_MASK0_CLR__congestion__WIDTH 1
+#define R_IRQ_MASK0_CLR__congestion__clr 1
+#define R_IRQ_MASK0_CLR__congestion__nop 0
+#define R_IRQ_MASK0_CLR__oversize__BITNR 22
+#define R_IRQ_MASK0_CLR__oversize__WIDTH 1
+#define R_IRQ_MASK0_CLR__oversize__clr 1
+#define R_IRQ_MASK0_CLR__oversize__nop 0
+#define R_IRQ_MASK0_CLR__alignment_error__BITNR 21
+#define R_IRQ_MASK0_CLR__alignment_error__WIDTH 1
+#define R_IRQ_MASK0_CLR__alignment_error__clr 1
+#define R_IRQ_MASK0_CLR__alignment_error__nop 0
+#define R_IRQ_MASK0_CLR__crc_error__BITNR 20
+#define R_IRQ_MASK0_CLR__crc_error__WIDTH 1
+#define R_IRQ_MASK0_CLR__crc_error__clr 1
+#define R_IRQ_MASK0_CLR__crc_error__nop 0
+#define R_IRQ_MASK0_CLR__overrun__BITNR 19
+#define R_IRQ_MASK0_CLR__overrun__WIDTH 1
+#define R_IRQ_MASK0_CLR__overrun__clr 1
+#define R_IRQ_MASK0_CLR__overrun__nop 0
+#define R_IRQ_MASK0_CLR__underrun__BITNR 18
+#define R_IRQ_MASK0_CLR__underrun__WIDTH 1
+#define R_IRQ_MASK0_CLR__underrun__clr 1
+#define R_IRQ_MASK0_CLR__underrun__nop 0
+#define R_IRQ_MASK0_CLR__excessive_col__BITNR 17
+#define R_IRQ_MASK0_CLR__excessive_col__WIDTH 1
+#define R_IRQ_MASK0_CLR__excessive_col__clr 1
+#define R_IRQ_MASK0_CLR__excessive_col__nop 0
+#define R_IRQ_MASK0_CLR__mdio__BITNR 16
+#define R_IRQ_MASK0_CLR__mdio__WIDTH 1
+#define R_IRQ_MASK0_CLR__mdio__clr 1
+#define R_IRQ_MASK0_CLR__mdio__nop 0
+#define R_IRQ_MASK0_CLR__ata_drq3__BITNR 15
+#define R_IRQ_MASK0_CLR__ata_drq3__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_drq3__clr 1
+#define R_IRQ_MASK0_CLR__ata_drq3__nop 0
+#define R_IRQ_MASK0_CLR__ata_drq2__BITNR 14
+#define R_IRQ_MASK0_CLR__ata_drq2__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_drq2__clr 1
+#define R_IRQ_MASK0_CLR__ata_drq2__nop 0
+#define R_IRQ_MASK0_CLR__ata_drq1__BITNR 13
+#define R_IRQ_MASK0_CLR__ata_drq1__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_drq1__clr 1
+#define R_IRQ_MASK0_CLR__ata_drq1__nop 0
+#define R_IRQ_MASK0_CLR__ata_drq0__BITNR 12
+#define R_IRQ_MASK0_CLR__ata_drq0__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_drq0__clr 1
+#define R_IRQ_MASK0_CLR__ata_drq0__nop 0
+#define R_IRQ_MASK0_CLR__par0_ecp_cmd__BITNR 11
+#define R_IRQ_MASK0_CLR__par0_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK0_CLR__par0_ecp_cmd__clr 1
+#define R_IRQ_MASK0_CLR__par0_ecp_cmd__nop 0
+#define R_IRQ_MASK0_CLR__ata_irq3__BITNR 11
+#define R_IRQ_MASK0_CLR__ata_irq3__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_irq3__clr 1
+#define R_IRQ_MASK0_CLR__ata_irq3__nop 0
+#define R_IRQ_MASK0_CLR__par0_peri__BITNR 10
+#define R_IRQ_MASK0_CLR__par0_peri__WIDTH 1
+#define R_IRQ_MASK0_CLR__par0_peri__clr 1
+#define R_IRQ_MASK0_CLR__par0_peri__nop 0
+#define R_IRQ_MASK0_CLR__ata_irq2__BITNR 10
+#define R_IRQ_MASK0_CLR__ata_irq2__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_irq2__clr 1
+#define R_IRQ_MASK0_CLR__ata_irq2__nop 0
+#define R_IRQ_MASK0_CLR__par0_data__BITNR 9
+#define R_IRQ_MASK0_CLR__par0_data__WIDTH 1
+#define R_IRQ_MASK0_CLR__par0_data__clr 1
+#define R_IRQ_MASK0_CLR__par0_data__nop 0
+#define R_IRQ_MASK0_CLR__ata_irq1__BITNR 9
+#define R_IRQ_MASK0_CLR__ata_irq1__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_irq1__clr 1
+#define R_IRQ_MASK0_CLR__ata_irq1__nop 0
+#define R_IRQ_MASK0_CLR__par0_ready__BITNR 8
+#define R_IRQ_MASK0_CLR__par0_ready__WIDTH 1
+#define R_IRQ_MASK0_CLR__par0_ready__clr 1
+#define R_IRQ_MASK0_CLR__par0_ready__nop 0
+#define R_IRQ_MASK0_CLR__ata_irq0__BITNR 8
+#define R_IRQ_MASK0_CLR__ata_irq0__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_irq0__clr 1
+#define R_IRQ_MASK0_CLR__ata_irq0__nop 0
+#define R_IRQ_MASK0_CLR__mio__BITNR 8
+#define R_IRQ_MASK0_CLR__mio__WIDTH 1
+#define R_IRQ_MASK0_CLR__mio__clr 1
+#define R_IRQ_MASK0_CLR__mio__nop 0
+#define R_IRQ_MASK0_CLR__scsi0__BITNR 8
+#define R_IRQ_MASK0_CLR__scsi0__WIDTH 1
+#define R_IRQ_MASK0_CLR__scsi0__clr 1
+#define R_IRQ_MASK0_CLR__scsi0__nop 0
+#define R_IRQ_MASK0_CLR__ata_dmaend__BITNR 7
+#define R_IRQ_MASK0_CLR__ata_dmaend__WIDTH 1
+#define R_IRQ_MASK0_CLR__ata_dmaend__clr 1
+#define R_IRQ_MASK0_CLR__ata_dmaend__nop 0
+#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__BITNR 5
+#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__clr 1
+#define R_IRQ_MASK0_CLR__irq_ext_vector_nr__nop 0
+#define R_IRQ_MASK0_CLR__irq_int_vector_nr__BITNR 4
+#define R_IRQ_MASK0_CLR__irq_int_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_CLR__irq_int_vector_nr__clr 1
+#define R_IRQ_MASK0_CLR__irq_int_vector_nr__nop 0
+#define R_IRQ_MASK0_CLR__ext_dma1__BITNR 3
+#define R_IRQ_MASK0_CLR__ext_dma1__WIDTH 1
+#define R_IRQ_MASK0_CLR__ext_dma1__clr 1
+#define R_IRQ_MASK0_CLR__ext_dma1__nop 0
+#define R_IRQ_MASK0_CLR__ext_dma0__BITNR 2
+#define R_IRQ_MASK0_CLR__ext_dma0__WIDTH 1
+#define R_IRQ_MASK0_CLR__ext_dma0__clr 1
+#define R_IRQ_MASK0_CLR__ext_dma0__nop 0
+#define R_IRQ_MASK0_CLR__timer1__BITNR 1
+#define R_IRQ_MASK0_CLR__timer1__WIDTH 1
+#define R_IRQ_MASK0_CLR__timer1__clr 1
+#define R_IRQ_MASK0_CLR__timer1__nop 0
+#define R_IRQ_MASK0_CLR__timer0__BITNR 0
+#define R_IRQ_MASK0_CLR__timer0__WIDTH 1
+#define R_IRQ_MASK0_CLR__timer0__clr 1
+#define R_IRQ_MASK0_CLR__timer0__nop 0
+
+#define R_IRQ_READ0 (IO_TYPECAST_RO_UDWORD 0xb00000c4)
+#define R_IRQ_READ0__nmi_pin__BITNR 31
+#define R_IRQ_READ0__nmi_pin__WIDTH 1
+#define R_IRQ_READ0__nmi_pin__active 1
+#define R_IRQ_READ0__nmi_pin__inactive 0
+#define R_IRQ_READ0__watchdog_nmi__BITNR 30
+#define R_IRQ_READ0__watchdog_nmi__WIDTH 1
+#define R_IRQ_READ0__watchdog_nmi__active 1
+#define R_IRQ_READ0__watchdog_nmi__inactive 0
+#define R_IRQ_READ0__sqe_test_error__BITNR 29
+#define R_IRQ_READ0__sqe_test_error__WIDTH 1
+#define R_IRQ_READ0__sqe_test_error__active 1
+#define R_IRQ_READ0__sqe_test_error__inactive 0
+#define R_IRQ_READ0__carrier_loss__BITNR 28
+#define R_IRQ_READ0__carrier_loss__WIDTH 1
+#define R_IRQ_READ0__carrier_loss__active 1
+#define R_IRQ_READ0__carrier_loss__inactive 0
+#define R_IRQ_READ0__deferred__BITNR 27
+#define R_IRQ_READ0__deferred__WIDTH 1
+#define R_IRQ_READ0__deferred__active 1
+#define R_IRQ_READ0__deferred__inactive 0
+#define R_IRQ_READ0__late_col__BITNR 26
+#define R_IRQ_READ0__late_col__WIDTH 1
+#define R_IRQ_READ0__late_col__active 1
+#define R_IRQ_READ0__late_col__inactive 0
+#define R_IRQ_READ0__multiple_col__BITNR 25
+#define R_IRQ_READ0__multiple_col__WIDTH 1
+#define R_IRQ_READ0__multiple_col__active 1
+#define R_IRQ_READ0__multiple_col__inactive 0
+#define R_IRQ_READ0__single_col__BITNR 24
+#define R_IRQ_READ0__single_col__WIDTH 1
+#define R_IRQ_READ0__single_col__active 1
+#define R_IRQ_READ0__single_col__inactive 0
+#define R_IRQ_READ0__congestion__BITNR 23
+#define R_IRQ_READ0__congestion__WIDTH 1
+#define R_IRQ_READ0__congestion__active 1
+#define R_IRQ_READ0__congestion__inactive 0
+#define R_IRQ_READ0__oversize__BITNR 22
+#define R_IRQ_READ0__oversize__WIDTH 1
+#define R_IRQ_READ0__oversize__active 1
+#define R_IRQ_READ0__oversize__inactive 0
+#define R_IRQ_READ0__alignment_error__BITNR 21
+#define R_IRQ_READ0__alignment_error__WIDTH 1
+#define R_IRQ_READ0__alignment_error__active 1
+#define R_IRQ_READ0__alignment_error__inactive 0
+#define R_IRQ_READ0__crc_error__BITNR 20
+#define R_IRQ_READ0__crc_error__WIDTH 1
+#define R_IRQ_READ0__crc_error__active 1
+#define R_IRQ_READ0__crc_error__inactive 0
+#define R_IRQ_READ0__overrun__BITNR 19
+#define R_IRQ_READ0__overrun__WIDTH 1
+#define R_IRQ_READ0__overrun__active 1
+#define R_IRQ_READ0__overrun__inactive 0
+#define R_IRQ_READ0__underrun__BITNR 18
+#define R_IRQ_READ0__underrun__WIDTH 1
+#define R_IRQ_READ0__underrun__active 1
+#define R_IRQ_READ0__underrun__inactive 0
+#define R_IRQ_READ0__excessive_col__BITNR 17
+#define R_IRQ_READ0__excessive_col__WIDTH 1
+#define R_IRQ_READ0__excessive_col__active 1
+#define R_IRQ_READ0__excessive_col__inactive 0
+#define R_IRQ_READ0__mdio__BITNR 16
+#define R_IRQ_READ0__mdio__WIDTH 1
+#define R_IRQ_READ0__mdio__active 1
+#define R_IRQ_READ0__mdio__inactive 0
+#define R_IRQ_READ0__ata_drq3__BITNR 15
+#define R_IRQ_READ0__ata_drq3__WIDTH 1
+#define R_IRQ_READ0__ata_drq3__active 1
+#define R_IRQ_READ0__ata_drq3__inactive 0
+#define R_IRQ_READ0__ata_drq2__BITNR 14
+#define R_IRQ_READ0__ata_drq2__WIDTH 1
+#define R_IRQ_READ0__ata_drq2__active 1
+#define R_IRQ_READ0__ata_drq2__inactive 0
+#define R_IRQ_READ0__ata_drq1__BITNR 13
+#define R_IRQ_READ0__ata_drq1__WIDTH 1
+#define R_IRQ_READ0__ata_drq1__active 1
+#define R_IRQ_READ0__ata_drq1__inactive 0
+#define R_IRQ_READ0__ata_drq0__BITNR 12
+#define R_IRQ_READ0__ata_drq0__WIDTH 1
+#define R_IRQ_READ0__ata_drq0__active 1
+#define R_IRQ_READ0__ata_drq0__inactive 0
+#define R_IRQ_READ0__par0_ecp_cmd__BITNR 11
+#define R_IRQ_READ0__par0_ecp_cmd__WIDTH 1
+#define R_IRQ_READ0__par0_ecp_cmd__active 1
+#define R_IRQ_READ0__par0_ecp_cmd__inactive 0
+#define R_IRQ_READ0__ata_irq3__BITNR 11
+#define R_IRQ_READ0__ata_irq3__WIDTH 1
+#define R_IRQ_READ0__ata_irq3__active 1
+#define R_IRQ_READ0__ata_irq3__inactive 0
+#define R_IRQ_READ0__par0_peri__BITNR 10
+#define R_IRQ_READ0__par0_peri__WIDTH 1
+#define R_IRQ_READ0__par0_peri__active 1
+#define R_IRQ_READ0__par0_peri__inactive 0
+#define R_IRQ_READ0__ata_irq2__BITNR 10
+#define R_IRQ_READ0__ata_irq2__WIDTH 1
+#define R_IRQ_READ0__ata_irq2__active 1
+#define R_IRQ_READ0__ata_irq2__inactive 0
+#define R_IRQ_READ0__par0_data__BITNR 9
+#define R_IRQ_READ0__par0_data__WIDTH 1
+#define R_IRQ_READ0__par0_data__active 1
+#define R_IRQ_READ0__par0_data__inactive 0
+#define R_IRQ_READ0__ata_irq1__BITNR 9
+#define R_IRQ_READ0__ata_irq1__WIDTH 1
+#define R_IRQ_READ0__ata_irq1__active 1
+#define R_IRQ_READ0__ata_irq1__inactive 0
+#define R_IRQ_READ0__par0_ready__BITNR 8
+#define R_IRQ_READ0__par0_ready__WIDTH 1
+#define R_IRQ_READ0__par0_ready__active 1
+#define R_IRQ_READ0__par0_ready__inactive 0
+#define R_IRQ_READ0__ata_irq0__BITNR 8
+#define R_IRQ_READ0__ata_irq0__WIDTH 1
+#define R_IRQ_READ0__ata_irq0__active 1
+#define R_IRQ_READ0__ata_irq0__inactive 0
+#define R_IRQ_READ0__mio__BITNR 8
+#define R_IRQ_READ0__mio__WIDTH 1
+#define R_IRQ_READ0__mio__active 1
+#define R_IRQ_READ0__mio__inactive 0
+#define R_IRQ_READ0__scsi0__BITNR 8
+#define R_IRQ_READ0__scsi0__WIDTH 1
+#define R_IRQ_READ0__scsi0__active 1
+#define R_IRQ_READ0__scsi0__inactive 0
+#define R_IRQ_READ0__ata_dmaend__BITNR 7
+#define R_IRQ_READ0__ata_dmaend__WIDTH 1
+#define R_IRQ_READ0__ata_dmaend__active 1
+#define R_IRQ_READ0__ata_dmaend__inactive 0
+#define R_IRQ_READ0__irq_ext_vector_nr__BITNR 5
+#define R_IRQ_READ0__irq_ext_vector_nr__WIDTH 1
+#define R_IRQ_READ0__irq_ext_vector_nr__active 1
+#define R_IRQ_READ0__irq_ext_vector_nr__inactive 0
+#define R_IRQ_READ0__irq_int_vector_nr__BITNR 4
+#define R_IRQ_READ0__irq_int_vector_nr__WIDTH 1
+#define R_IRQ_READ0__irq_int_vector_nr__active 1
+#define R_IRQ_READ0__irq_int_vector_nr__inactive 0
+#define R_IRQ_READ0__ext_dma1__BITNR 3
+#define R_IRQ_READ0__ext_dma1__WIDTH 1
+#define R_IRQ_READ0__ext_dma1__active 1
+#define R_IRQ_READ0__ext_dma1__inactive 0
+#define R_IRQ_READ0__ext_dma0__BITNR 2
+#define R_IRQ_READ0__ext_dma0__WIDTH 1
+#define R_IRQ_READ0__ext_dma0__active 1
+#define R_IRQ_READ0__ext_dma0__inactive 0
+#define R_IRQ_READ0__timer1__BITNR 1
+#define R_IRQ_READ0__timer1__WIDTH 1
+#define R_IRQ_READ0__timer1__active 1
+#define R_IRQ_READ0__timer1__inactive 0
+#define R_IRQ_READ0__timer0__BITNR 0
+#define R_IRQ_READ0__timer0__WIDTH 1
+#define R_IRQ_READ0__timer0__active 1
+#define R_IRQ_READ0__timer0__inactive 0
+
+#define R_IRQ_MASK0_SET (IO_TYPECAST_UDWORD 0xb00000c4)
+#define R_IRQ_MASK0_SET__nmi_pin__BITNR 31
+#define R_IRQ_MASK0_SET__nmi_pin__WIDTH 1
+#define R_IRQ_MASK0_SET__nmi_pin__set 1
+#define R_IRQ_MASK0_SET__nmi_pin__nop 0
+#define R_IRQ_MASK0_SET__watchdog_nmi__BITNR 30
+#define R_IRQ_MASK0_SET__watchdog_nmi__WIDTH 1
+#define R_IRQ_MASK0_SET__watchdog_nmi__set 1
+#define R_IRQ_MASK0_SET__watchdog_nmi__nop 0
+#define R_IRQ_MASK0_SET__sqe_test_error__BITNR 29
+#define R_IRQ_MASK0_SET__sqe_test_error__WIDTH 1
+#define R_IRQ_MASK0_SET__sqe_test_error__set 1
+#define R_IRQ_MASK0_SET__sqe_test_error__nop 0
+#define R_IRQ_MASK0_SET__carrier_loss__BITNR 28
+#define R_IRQ_MASK0_SET__carrier_loss__WIDTH 1
+#define R_IRQ_MASK0_SET__carrier_loss__set 1
+#define R_IRQ_MASK0_SET__carrier_loss__nop 0
+#define R_IRQ_MASK0_SET__deferred__BITNR 27
+#define R_IRQ_MASK0_SET__deferred__WIDTH 1
+#define R_IRQ_MASK0_SET__deferred__set 1
+#define R_IRQ_MASK0_SET__deferred__nop 0
+#define R_IRQ_MASK0_SET__late_col__BITNR 26
+#define R_IRQ_MASK0_SET__late_col__WIDTH 1
+#define R_IRQ_MASK0_SET__late_col__set 1
+#define R_IRQ_MASK0_SET__late_col__nop 0
+#define R_IRQ_MASK0_SET__multiple_col__BITNR 25
+#define R_IRQ_MASK0_SET__multiple_col__WIDTH 1
+#define R_IRQ_MASK0_SET__multiple_col__set 1
+#define R_IRQ_MASK0_SET__multiple_col__nop 0
+#define R_IRQ_MASK0_SET__single_col__BITNR 24
+#define R_IRQ_MASK0_SET__single_col__WIDTH 1
+#define R_IRQ_MASK0_SET__single_col__set 1
+#define R_IRQ_MASK0_SET__single_col__nop 0
+#define R_IRQ_MASK0_SET__congestion__BITNR 23
+#define R_IRQ_MASK0_SET__congestion__WIDTH 1
+#define R_IRQ_MASK0_SET__congestion__set 1
+#define R_IRQ_MASK0_SET__congestion__nop 0
+#define R_IRQ_MASK0_SET__oversize__BITNR 22
+#define R_IRQ_MASK0_SET__oversize__WIDTH 1
+#define R_IRQ_MASK0_SET__oversize__set 1
+#define R_IRQ_MASK0_SET__oversize__nop 0
+#define R_IRQ_MASK0_SET__alignment_error__BITNR 21
+#define R_IRQ_MASK0_SET__alignment_error__WIDTH 1
+#define R_IRQ_MASK0_SET__alignment_error__set 1
+#define R_IRQ_MASK0_SET__alignment_error__nop 0
+#define R_IRQ_MASK0_SET__crc_error__BITNR 20
+#define R_IRQ_MASK0_SET__crc_error__WIDTH 1
+#define R_IRQ_MASK0_SET__crc_error__set 1
+#define R_IRQ_MASK0_SET__crc_error__nop 0
+#define R_IRQ_MASK0_SET__overrun__BITNR 19
+#define R_IRQ_MASK0_SET__overrun__WIDTH 1
+#define R_IRQ_MASK0_SET__overrun__set 1
+#define R_IRQ_MASK0_SET__overrun__nop 0
+#define R_IRQ_MASK0_SET__underrun__BITNR 18
+#define R_IRQ_MASK0_SET__underrun__WIDTH 1
+#define R_IRQ_MASK0_SET__underrun__set 1
+#define R_IRQ_MASK0_SET__underrun__nop 0
+#define R_IRQ_MASK0_SET__excessive_col__BITNR 17
+#define R_IRQ_MASK0_SET__excessive_col__WIDTH 1
+#define R_IRQ_MASK0_SET__excessive_col__set 1
+#define R_IRQ_MASK0_SET__excessive_col__nop 0
+#define R_IRQ_MASK0_SET__mdio__BITNR 16
+#define R_IRQ_MASK0_SET__mdio__WIDTH 1
+#define R_IRQ_MASK0_SET__mdio__set 1
+#define R_IRQ_MASK0_SET__mdio__nop 0
+#define R_IRQ_MASK0_SET__ata_drq3__BITNR 15
+#define R_IRQ_MASK0_SET__ata_drq3__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_drq3__set 1
+#define R_IRQ_MASK0_SET__ata_drq3__nop 0
+#define R_IRQ_MASK0_SET__ata_drq2__BITNR 14
+#define R_IRQ_MASK0_SET__ata_drq2__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_drq2__set 1
+#define R_IRQ_MASK0_SET__ata_drq2__nop 0
+#define R_IRQ_MASK0_SET__ata_drq1__BITNR 13
+#define R_IRQ_MASK0_SET__ata_drq1__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_drq1__set 1
+#define R_IRQ_MASK0_SET__ata_drq1__nop 0
+#define R_IRQ_MASK0_SET__ata_drq0__BITNR 12
+#define R_IRQ_MASK0_SET__ata_drq0__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_drq0__set 1
+#define R_IRQ_MASK0_SET__ata_drq0__nop 0
+#define R_IRQ_MASK0_SET__par0_ecp_cmd__BITNR 11
+#define R_IRQ_MASK0_SET__par0_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK0_SET__par0_ecp_cmd__set 1
+#define R_IRQ_MASK0_SET__par0_ecp_cmd__nop 0
+#define R_IRQ_MASK0_SET__ata_irq3__BITNR 11
+#define R_IRQ_MASK0_SET__ata_irq3__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_irq3__set 1
+#define R_IRQ_MASK0_SET__ata_irq3__nop 0
+#define R_IRQ_MASK0_SET__par0_peri__BITNR 10
+#define R_IRQ_MASK0_SET__par0_peri__WIDTH 1
+#define R_IRQ_MASK0_SET__par0_peri__set 1
+#define R_IRQ_MASK0_SET__par0_peri__nop 0
+#define R_IRQ_MASK0_SET__ata_irq2__BITNR 10
+#define R_IRQ_MASK0_SET__ata_irq2__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_irq2__set 1
+#define R_IRQ_MASK0_SET__ata_irq2__nop 0
+#define R_IRQ_MASK0_SET__par0_data__BITNR 9
+#define R_IRQ_MASK0_SET__par0_data__WIDTH 1
+#define R_IRQ_MASK0_SET__par0_data__set 1
+#define R_IRQ_MASK0_SET__par0_data__nop 0
+#define R_IRQ_MASK0_SET__ata_irq1__BITNR 9
+#define R_IRQ_MASK0_SET__ata_irq1__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_irq1__set 1
+#define R_IRQ_MASK0_SET__ata_irq1__nop 0
+#define R_IRQ_MASK0_SET__par0_ready__BITNR 8
+#define R_IRQ_MASK0_SET__par0_ready__WIDTH 1
+#define R_IRQ_MASK0_SET__par0_ready__set 1
+#define R_IRQ_MASK0_SET__par0_ready__nop 0
+#define R_IRQ_MASK0_SET__ata_irq0__BITNR 8
+#define R_IRQ_MASK0_SET__ata_irq0__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_irq0__set 1
+#define R_IRQ_MASK0_SET__ata_irq0__nop 0
+#define R_IRQ_MASK0_SET__mio__BITNR 8
+#define R_IRQ_MASK0_SET__mio__WIDTH 1
+#define R_IRQ_MASK0_SET__mio__set 1
+#define R_IRQ_MASK0_SET__mio__nop 0
+#define R_IRQ_MASK0_SET__scsi0__BITNR 8
+#define R_IRQ_MASK0_SET__scsi0__WIDTH 1
+#define R_IRQ_MASK0_SET__scsi0__set 1
+#define R_IRQ_MASK0_SET__scsi0__nop 0
+#define R_IRQ_MASK0_SET__ata_dmaend__BITNR 7
+#define R_IRQ_MASK0_SET__ata_dmaend__WIDTH 1
+#define R_IRQ_MASK0_SET__ata_dmaend__set 1
+#define R_IRQ_MASK0_SET__ata_dmaend__nop 0
+#define R_IRQ_MASK0_SET__irq_ext_vector_nr__BITNR 5
+#define R_IRQ_MASK0_SET__irq_ext_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_SET__irq_ext_vector_nr__set 1
+#define R_IRQ_MASK0_SET__irq_ext_vector_nr__nop 0
+#define R_IRQ_MASK0_SET__irq_int_vector_nr__BITNR 4
+#define R_IRQ_MASK0_SET__irq_int_vector_nr__WIDTH 1
+#define R_IRQ_MASK0_SET__irq_int_vector_nr__set 1
+#define R_IRQ_MASK0_SET__irq_int_vector_nr__nop 0
+#define R_IRQ_MASK0_SET__ext_dma1__BITNR 3
+#define R_IRQ_MASK0_SET__ext_dma1__WIDTH 1
+#define R_IRQ_MASK0_SET__ext_dma1__set 1
+#define R_IRQ_MASK0_SET__ext_dma1__nop 0
+#define R_IRQ_MASK0_SET__ext_dma0__BITNR 2
+#define R_IRQ_MASK0_SET__ext_dma0__WIDTH 1
+#define R_IRQ_MASK0_SET__ext_dma0__set 1
+#define R_IRQ_MASK0_SET__ext_dma0__nop 0
+#define R_IRQ_MASK0_SET__timer1__BITNR 1
+#define R_IRQ_MASK0_SET__timer1__WIDTH 1
+#define R_IRQ_MASK0_SET__timer1__set 1
+#define R_IRQ_MASK0_SET__timer1__nop 0
+#define R_IRQ_MASK0_SET__timer0__BITNR 0
+#define R_IRQ_MASK0_SET__timer0__WIDTH 1
+#define R_IRQ_MASK0_SET__timer0__set 1
+#define R_IRQ_MASK0_SET__timer0__nop 0
+
+#define R_IRQ_MASK1_RD (IO_TYPECAST_RO_UDWORD 0xb00000c8)
+#define R_IRQ_MASK1_RD__sw_int7__BITNR 31
+#define R_IRQ_MASK1_RD__sw_int7__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int7__active 1
+#define R_IRQ_MASK1_RD__sw_int7__inactive 0
+#define R_IRQ_MASK1_RD__sw_int6__BITNR 30
+#define R_IRQ_MASK1_RD__sw_int6__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int6__active 1
+#define R_IRQ_MASK1_RD__sw_int6__inactive 0
+#define R_IRQ_MASK1_RD__sw_int5__BITNR 29
+#define R_IRQ_MASK1_RD__sw_int5__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int5__active 1
+#define R_IRQ_MASK1_RD__sw_int5__inactive 0
+#define R_IRQ_MASK1_RD__sw_int4__BITNR 28
+#define R_IRQ_MASK1_RD__sw_int4__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int4__active 1
+#define R_IRQ_MASK1_RD__sw_int4__inactive 0
+#define R_IRQ_MASK1_RD__sw_int3__BITNR 27
+#define R_IRQ_MASK1_RD__sw_int3__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int3__active 1
+#define R_IRQ_MASK1_RD__sw_int3__inactive 0
+#define R_IRQ_MASK1_RD__sw_int2__BITNR 26
+#define R_IRQ_MASK1_RD__sw_int2__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int2__active 1
+#define R_IRQ_MASK1_RD__sw_int2__inactive 0
+#define R_IRQ_MASK1_RD__sw_int1__BITNR 25
+#define R_IRQ_MASK1_RD__sw_int1__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int1__active 1
+#define R_IRQ_MASK1_RD__sw_int1__inactive 0
+#define R_IRQ_MASK1_RD__sw_int0__BITNR 24
+#define R_IRQ_MASK1_RD__sw_int0__WIDTH 1
+#define R_IRQ_MASK1_RD__sw_int0__active 1
+#define R_IRQ_MASK1_RD__sw_int0__inactive 0
+#define R_IRQ_MASK1_RD__par1_ecp_cmd__BITNR 19
+#define R_IRQ_MASK1_RD__par1_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK1_RD__par1_ecp_cmd__active 1
+#define R_IRQ_MASK1_RD__par1_ecp_cmd__inactive 0
+#define R_IRQ_MASK1_RD__par1_peri__BITNR 18
+#define R_IRQ_MASK1_RD__par1_peri__WIDTH 1
+#define R_IRQ_MASK1_RD__par1_peri__active 1
+#define R_IRQ_MASK1_RD__par1_peri__inactive 0
+#define R_IRQ_MASK1_RD__par1_data__BITNR 17
+#define R_IRQ_MASK1_RD__par1_data__WIDTH 1
+#define R_IRQ_MASK1_RD__par1_data__active 1
+#define R_IRQ_MASK1_RD__par1_data__inactive 0
+#define R_IRQ_MASK1_RD__par1_ready__BITNR 16
+#define R_IRQ_MASK1_RD__par1_ready__WIDTH 1
+#define R_IRQ_MASK1_RD__par1_ready__active 1
+#define R_IRQ_MASK1_RD__par1_ready__inactive 0
+#define R_IRQ_MASK1_RD__scsi1__BITNR 16
+#define R_IRQ_MASK1_RD__scsi1__WIDTH 1
+#define R_IRQ_MASK1_RD__scsi1__active 1
+#define R_IRQ_MASK1_RD__scsi1__inactive 0
+#define R_IRQ_MASK1_RD__ser3_ready__BITNR 15
+#define R_IRQ_MASK1_RD__ser3_ready__WIDTH 1
+#define R_IRQ_MASK1_RD__ser3_ready__active 1
+#define R_IRQ_MASK1_RD__ser3_ready__inactive 0
+#define R_IRQ_MASK1_RD__ser3_data__BITNR 14
+#define R_IRQ_MASK1_RD__ser3_data__WIDTH 1
+#define R_IRQ_MASK1_RD__ser3_data__active 1
+#define R_IRQ_MASK1_RD__ser3_data__inactive 0
+#define R_IRQ_MASK1_RD__ser2_ready__BITNR 13
+#define R_IRQ_MASK1_RD__ser2_ready__WIDTH 1
+#define R_IRQ_MASK1_RD__ser2_ready__active 1
+#define R_IRQ_MASK1_RD__ser2_ready__inactive 0
+#define R_IRQ_MASK1_RD__ser2_data__BITNR 12
+#define R_IRQ_MASK1_RD__ser2_data__WIDTH 1
+#define R_IRQ_MASK1_RD__ser2_data__active 1
+#define R_IRQ_MASK1_RD__ser2_data__inactive 0
+#define R_IRQ_MASK1_RD__ser1_ready__BITNR 11
+#define R_IRQ_MASK1_RD__ser1_ready__WIDTH 1
+#define R_IRQ_MASK1_RD__ser1_ready__active 1
+#define R_IRQ_MASK1_RD__ser1_ready__inactive 0
+#define R_IRQ_MASK1_RD__ser1_data__BITNR 10
+#define R_IRQ_MASK1_RD__ser1_data__WIDTH 1
+#define R_IRQ_MASK1_RD__ser1_data__active 1
+#define R_IRQ_MASK1_RD__ser1_data__inactive 0
+#define R_IRQ_MASK1_RD__ser0_ready__BITNR 9
+#define R_IRQ_MASK1_RD__ser0_ready__WIDTH 1
+#define R_IRQ_MASK1_RD__ser0_ready__active 1
+#define R_IRQ_MASK1_RD__ser0_ready__inactive 0
+#define R_IRQ_MASK1_RD__ser0_data__BITNR 8
+#define R_IRQ_MASK1_RD__ser0_data__WIDTH 1
+#define R_IRQ_MASK1_RD__ser0_data__active 1
+#define R_IRQ_MASK1_RD__ser0_data__inactive 0
+#define R_IRQ_MASK1_RD__pa7__BITNR 7
+#define R_IRQ_MASK1_RD__pa7__WIDTH 1
+#define R_IRQ_MASK1_RD__pa7__active 1
+#define R_IRQ_MASK1_RD__pa7__inactive 0
+#define R_IRQ_MASK1_RD__pa6__BITNR 6
+#define R_IRQ_MASK1_RD__pa6__WIDTH 1
+#define R_IRQ_MASK1_RD__pa6__active 1
+#define R_IRQ_MASK1_RD__pa6__inactive 0
+#define R_IRQ_MASK1_RD__pa5__BITNR 5
+#define R_IRQ_MASK1_RD__pa5__WIDTH 1
+#define R_IRQ_MASK1_RD__pa5__active 1
+#define R_IRQ_MASK1_RD__pa5__inactive 0
+#define R_IRQ_MASK1_RD__pa4__BITNR 4
+#define R_IRQ_MASK1_RD__pa4__WIDTH 1
+#define R_IRQ_MASK1_RD__pa4__active 1
+#define R_IRQ_MASK1_RD__pa4__inactive 0
+#define R_IRQ_MASK1_RD__pa3__BITNR 3
+#define R_IRQ_MASK1_RD__pa3__WIDTH 1
+#define R_IRQ_MASK1_RD__pa3__active 1
+#define R_IRQ_MASK1_RD__pa3__inactive 0
+#define R_IRQ_MASK1_RD__pa2__BITNR 2
+#define R_IRQ_MASK1_RD__pa2__WIDTH 1
+#define R_IRQ_MASK1_RD__pa2__active 1
+#define R_IRQ_MASK1_RD__pa2__inactive 0
+#define R_IRQ_MASK1_RD__pa1__BITNR 1
+#define R_IRQ_MASK1_RD__pa1__WIDTH 1
+#define R_IRQ_MASK1_RD__pa1__active 1
+#define R_IRQ_MASK1_RD__pa1__inactive 0
+#define R_IRQ_MASK1_RD__pa0__BITNR 0
+#define R_IRQ_MASK1_RD__pa0__WIDTH 1
+#define R_IRQ_MASK1_RD__pa0__active 1
+#define R_IRQ_MASK1_RD__pa0__inactive 0
+
+#define R_IRQ_MASK1_CLR (IO_TYPECAST_UDWORD 0xb00000c8)
+#define R_IRQ_MASK1_CLR__sw_int7__BITNR 31
+#define R_IRQ_MASK1_CLR__sw_int7__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int7__clr 1
+#define R_IRQ_MASK1_CLR__sw_int7__nop 0
+#define R_IRQ_MASK1_CLR__sw_int6__BITNR 30
+#define R_IRQ_MASK1_CLR__sw_int6__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int6__clr 1
+#define R_IRQ_MASK1_CLR__sw_int6__nop 0
+#define R_IRQ_MASK1_CLR__sw_int5__BITNR 29
+#define R_IRQ_MASK1_CLR__sw_int5__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int5__clr 1
+#define R_IRQ_MASK1_CLR__sw_int5__nop 0
+#define R_IRQ_MASK1_CLR__sw_int4__BITNR 28
+#define R_IRQ_MASK1_CLR__sw_int4__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int4__clr 1
+#define R_IRQ_MASK1_CLR__sw_int4__nop 0
+#define R_IRQ_MASK1_CLR__sw_int3__BITNR 27
+#define R_IRQ_MASK1_CLR__sw_int3__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int3__clr 1
+#define R_IRQ_MASK1_CLR__sw_int3__nop 0
+#define R_IRQ_MASK1_CLR__sw_int2__BITNR 26
+#define R_IRQ_MASK1_CLR__sw_int2__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int2__clr 1
+#define R_IRQ_MASK1_CLR__sw_int2__nop 0
+#define R_IRQ_MASK1_CLR__sw_int1__BITNR 25
+#define R_IRQ_MASK1_CLR__sw_int1__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int1__clr 1
+#define R_IRQ_MASK1_CLR__sw_int1__nop 0
+#define R_IRQ_MASK1_CLR__sw_int0__BITNR 24
+#define R_IRQ_MASK1_CLR__sw_int0__WIDTH 1
+#define R_IRQ_MASK1_CLR__sw_int0__clr 1
+#define R_IRQ_MASK1_CLR__sw_int0__nop 0
+#define R_IRQ_MASK1_CLR__par1_ecp_cmd__BITNR 19
+#define R_IRQ_MASK1_CLR__par1_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK1_CLR__par1_ecp_cmd__clr 1
+#define R_IRQ_MASK1_CLR__par1_ecp_cmd__nop 0
+#define R_IRQ_MASK1_CLR__par1_peri__BITNR 18
+#define R_IRQ_MASK1_CLR__par1_peri__WIDTH 1
+#define R_IRQ_MASK1_CLR__par1_peri__clr 1
+#define R_IRQ_MASK1_CLR__par1_peri__nop 0
+#define R_IRQ_MASK1_CLR__par1_data__BITNR 17
+#define R_IRQ_MASK1_CLR__par1_data__WIDTH 1
+#define R_IRQ_MASK1_CLR__par1_data__clr 1
+#define R_IRQ_MASK1_CLR__par1_data__nop 0
+#define R_IRQ_MASK1_CLR__par1_ready__BITNR 16
+#define R_IRQ_MASK1_CLR__par1_ready__WIDTH 1
+#define R_IRQ_MASK1_CLR__par1_ready__clr 1
+#define R_IRQ_MASK1_CLR__par1_ready__nop 0
+#define R_IRQ_MASK1_CLR__scsi1__BITNR 16
+#define R_IRQ_MASK1_CLR__scsi1__WIDTH 1
+#define R_IRQ_MASK1_CLR__scsi1__clr 1
+#define R_IRQ_MASK1_CLR__scsi1__nop 0
+#define R_IRQ_MASK1_CLR__ser3_ready__BITNR 15
+#define R_IRQ_MASK1_CLR__ser3_ready__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser3_ready__clr 1
+#define R_IRQ_MASK1_CLR__ser3_ready__nop 0
+#define R_IRQ_MASK1_CLR__ser3_data__BITNR 14
+#define R_IRQ_MASK1_CLR__ser3_data__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser3_data__clr 1
+#define R_IRQ_MASK1_CLR__ser3_data__nop 0
+#define R_IRQ_MASK1_CLR__ser2_ready__BITNR 13
+#define R_IRQ_MASK1_CLR__ser2_ready__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser2_ready__clr 1
+#define R_IRQ_MASK1_CLR__ser2_ready__nop 0
+#define R_IRQ_MASK1_CLR__ser2_data__BITNR 12
+#define R_IRQ_MASK1_CLR__ser2_data__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser2_data__clr 1
+#define R_IRQ_MASK1_CLR__ser2_data__nop 0
+#define R_IRQ_MASK1_CLR__ser1_ready__BITNR 11
+#define R_IRQ_MASK1_CLR__ser1_ready__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser1_ready__clr 1
+#define R_IRQ_MASK1_CLR__ser1_ready__nop 0
+#define R_IRQ_MASK1_CLR__ser1_data__BITNR 10
+#define R_IRQ_MASK1_CLR__ser1_data__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser1_data__clr 1
+#define R_IRQ_MASK1_CLR__ser1_data__nop 0
+#define R_IRQ_MASK1_CLR__ser0_ready__BITNR 9
+#define R_IRQ_MASK1_CLR__ser0_ready__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser0_ready__clr 1
+#define R_IRQ_MASK1_CLR__ser0_ready__nop 0
+#define R_IRQ_MASK1_CLR__ser0_data__BITNR 8
+#define R_IRQ_MASK1_CLR__ser0_data__WIDTH 1
+#define R_IRQ_MASK1_CLR__ser0_data__clr 1
+#define R_IRQ_MASK1_CLR__ser0_data__nop 0
+#define R_IRQ_MASK1_CLR__pa7__BITNR 7
+#define R_IRQ_MASK1_CLR__pa7__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa7__clr 1
+#define R_IRQ_MASK1_CLR__pa7__nop 0
+#define R_IRQ_MASK1_CLR__pa6__BITNR 6
+#define R_IRQ_MASK1_CLR__pa6__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa6__clr 1
+#define R_IRQ_MASK1_CLR__pa6__nop 0
+#define R_IRQ_MASK1_CLR__pa5__BITNR 5
+#define R_IRQ_MASK1_CLR__pa5__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa5__clr 1
+#define R_IRQ_MASK1_CLR__pa5__nop 0
+#define R_IRQ_MASK1_CLR__pa4__BITNR 4
+#define R_IRQ_MASK1_CLR__pa4__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa4__clr 1
+#define R_IRQ_MASK1_CLR__pa4__nop 0
+#define R_IRQ_MASK1_CLR__pa3__BITNR 3
+#define R_IRQ_MASK1_CLR__pa3__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa3__clr 1
+#define R_IRQ_MASK1_CLR__pa3__nop 0
+#define R_IRQ_MASK1_CLR__pa2__BITNR 2
+#define R_IRQ_MASK1_CLR__pa2__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa2__clr 1
+#define R_IRQ_MASK1_CLR__pa2__nop 0
+#define R_IRQ_MASK1_CLR__pa1__BITNR 1
+#define R_IRQ_MASK1_CLR__pa1__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa1__clr 1
+#define R_IRQ_MASK1_CLR__pa1__nop 0
+#define R_IRQ_MASK1_CLR__pa0__BITNR 0
+#define R_IRQ_MASK1_CLR__pa0__WIDTH 1
+#define R_IRQ_MASK1_CLR__pa0__clr 1
+#define R_IRQ_MASK1_CLR__pa0__nop 0
+
+#define R_IRQ_READ1 (IO_TYPECAST_RO_UDWORD 0xb00000cc)
+#define R_IRQ_READ1__sw_int7__BITNR 31
+#define R_IRQ_READ1__sw_int7__WIDTH 1
+#define R_IRQ_READ1__sw_int7__active 1
+#define R_IRQ_READ1__sw_int7__inactive 0
+#define R_IRQ_READ1__sw_int6__BITNR 30
+#define R_IRQ_READ1__sw_int6__WIDTH 1
+#define R_IRQ_READ1__sw_int6__active 1
+#define R_IRQ_READ1__sw_int6__inactive 0
+#define R_IRQ_READ1__sw_int5__BITNR 29
+#define R_IRQ_READ1__sw_int5__WIDTH 1
+#define R_IRQ_READ1__sw_int5__active 1
+#define R_IRQ_READ1__sw_int5__inactive 0
+#define R_IRQ_READ1__sw_int4__BITNR 28
+#define R_IRQ_READ1__sw_int4__WIDTH 1
+#define R_IRQ_READ1__sw_int4__active 1
+#define R_IRQ_READ1__sw_int4__inactive 0
+#define R_IRQ_READ1__sw_int3__BITNR 27
+#define R_IRQ_READ1__sw_int3__WIDTH 1
+#define R_IRQ_READ1__sw_int3__active 1
+#define R_IRQ_READ1__sw_int3__inactive 0
+#define R_IRQ_READ1__sw_int2__BITNR 26
+#define R_IRQ_READ1__sw_int2__WIDTH 1
+#define R_IRQ_READ1__sw_int2__active 1
+#define R_IRQ_READ1__sw_int2__inactive 0
+#define R_IRQ_READ1__sw_int1__BITNR 25
+#define R_IRQ_READ1__sw_int1__WIDTH 1
+#define R_IRQ_READ1__sw_int1__active 1
+#define R_IRQ_READ1__sw_int1__inactive 0
+#define R_IRQ_READ1__sw_int0__BITNR 24
+#define R_IRQ_READ1__sw_int0__WIDTH 1
+#define R_IRQ_READ1__sw_int0__active 1
+#define R_IRQ_READ1__sw_int0__inactive 0
+#define R_IRQ_READ1__par1_ecp_cmd__BITNR 19
+#define R_IRQ_READ1__par1_ecp_cmd__WIDTH 1
+#define R_IRQ_READ1__par1_ecp_cmd__active 1
+#define R_IRQ_READ1__par1_ecp_cmd__inactive 0
+#define R_IRQ_READ1__par1_peri__BITNR 18
+#define R_IRQ_READ1__par1_peri__WIDTH 1
+#define R_IRQ_READ1__par1_peri__active 1
+#define R_IRQ_READ1__par1_peri__inactive 0
+#define R_IRQ_READ1__par1_data__BITNR 17
+#define R_IRQ_READ1__par1_data__WIDTH 1
+#define R_IRQ_READ1__par1_data__active 1
+#define R_IRQ_READ1__par1_data__inactive 0
+#define R_IRQ_READ1__par1_ready__BITNR 16
+#define R_IRQ_READ1__par1_ready__WIDTH 1
+#define R_IRQ_READ1__par1_ready__active 1
+#define R_IRQ_READ1__par1_ready__inactive 0
+#define R_IRQ_READ1__scsi1__BITNR 16
+#define R_IRQ_READ1__scsi1__WIDTH 1
+#define R_IRQ_READ1__scsi1__active 1
+#define R_IRQ_READ1__scsi1__inactive 0
+#define R_IRQ_READ1__ser3_ready__BITNR 15
+#define R_IRQ_READ1__ser3_ready__WIDTH 1
+#define R_IRQ_READ1__ser3_ready__active 1
+#define R_IRQ_READ1__ser3_ready__inactive 0
+#define R_IRQ_READ1__ser3_data__BITNR 14
+#define R_IRQ_READ1__ser3_data__WIDTH 1
+#define R_IRQ_READ1__ser3_data__active 1
+#define R_IRQ_READ1__ser3_data__inactive 0
+#define R_IRQ_READ1__ser2_ready__BITNR 13
+#define R_IRQ_READ1__ser2_ready__WIDTH 1
+#define R_IRQ_READ1__ser2_ready__active 1
+#define R_IRQ_READ1__ser2_ready__inactive 0
+#define R_IRQ_READ1__ser2_data__BITNR 12
+#define R_IRQ_READ1__ser2_data__WIDTH 1
+#define R_IRQ_READ1__ser2_data__active 1
+#define R_IRQ_READ1__ser2_data__inactive 0
+#define R_IRQ_READ1__ser1_ready__BITNR 11
+#define R_IRQ_READ1__ser1_ready__WIDTH 1
+#define R_IRQ_READ1__ser1_ready__active 1
+#define R_IRQ_READ1__ser1_ready__inactive 0
+#define R_IRQ_READ1__ser1_data__BITNR 10
+#define R_IRQ_READ1__ser1_data__WIDTH 1
+#define R_IRQ_READ1__ser1_data__active 1
+#define R_IRQ_READ1__ser1_data__inactive 0
+#define R_IRQ_READ1__ser0_ready__BITNR 9
+#define R_IRQ_READ1__ser0_ready__WIDTH 1
+#define R_IRQ_READ1__ser0_ready__active 1
+#define R_IRQ_READ1__ser0_ready__inactive 0
+#define R_IRQ_READ1__ser0_data__BITNR 8
+#define R_IRQ_READ1__ser0_data__WIDTH 1
+#define R_IRQ_READ1__ser0_data__active 1
+#define R_IRQ_READ1__ser0_data__inactive 0
+#define R_IRQ_READ1__pa7__BITNR 7
+#define R_IRQ_READ1__pa7__WIDTH 1
+#define R_IRQ_READ1__pa7__active 1
+#define R_IRQ_READ1__pa7__inactive 0
+#define R_IRQ_READ1__pa6__BITNR 6
+#define R_IRQ_READ1__pa6__WIDTH 1
+#define R_IRQ_READ1__pa6__active 1
+#define R_IRQ_READ1__pa6__inactive 0
+#define R_IRQ_READ1__pa5__BITNR 5
+#define R_IRQ_READ1__pa5__WIDTH 1
+#define R_IRQ_READ1__pa5__active 1
+#define R_IRQ_READ1__pa5__inactive 0
+#define R_IRQ_READ1__pa4__BITNR 4
+#define R_IRQ_READ1__pa4__WIDTH 1
+#define R_IRQ_READ1__pa4__active 1
+#define R_IRQ_READ1__pa4__inactive 0
+#define R_IRQ_READ1__pa3__BITNR 3
+#define R_IRQ_READ1__pa3__WIDTH 1
+#define R_IRQ_READ1__pa3__active 1
+#define R_IRQ_READ1__pa3__inactive 0
+#define R_IRQ_READ1__pa2__BITNR 2
+#define R_IRQ_READ1__pa2__WIDTH 1
+#define R_IRQ_READ1__pa2__active 1
+#define R_IRQ_READ1__pa2__inactive 0
+#define R_IRQ_READ1__pa1__BITNR 1
+#define R_IRQ_READ1__pa1__WIDTH 1
+#define R_IRQ_READ1__pa1__active 1
+#define R_IRQ_READ1__pa1__inactive 0
+#define R_IRQ_READ1__pa0__BITNR 0
+#define R_IRQ_READ1__pa0__WIDTH 1
+#define R_IRQ_READ1__pa0__active 1
+#define R_IRQ_READ1__pa0__inactive 0
+
+#define R_IRQ_MASK1_SET (IO_TYPECAST_UDWORD 0xb00000cc)
+#define R_IRQ_MASK1_SET__sw_int7__BITNR 31
+#define R_IRQ_MASK1_SET__sw_int7__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int7__set 1
+#define R_IRQ_MASK1_SET__sw_int7__nop 0
+#define R_IRQ_MASK1_SET__sw_int6__BITNR 30
+#define R_IRQ_MASK1_SET__sw_int6__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int6__set 1
+#define R_IRQ_MASK1_SET__sw_int6__nop 0
+#define R_IRQ_MASK1_SET__sw_int5__BITNR 29
+#define R_IRQ_MASK1_SET__sw_int5__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int5__set 1
+#define R_IRQ_MASK1_SET__sw_int5__nop 0
+#define R_IRQ_MASK1_SET__sw_int4__BITNR 28
+#define R_IRQ_MASK1_SET__sw_int4__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int4__set 1
+#define R_IRQ_MASK1_SET__sw_int4__nop 0
+#define R_IRQ_MASK1_SET__sw_int3__BITNR 27
+#define R_IRQ_MASK1_SET__sw_int3__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int3__set 1
+#define R_IRQ_MASK1_SET__sw_int3__nop 0
+#define R_IRQ_MASK1_SET__sw_int2__BITNR 26
+#define R_IRQ_MASK1_SET__sw_int2__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int2__set 1
+#define R_IRQ_MASK1_SET__sw_int2__nop 0
+#define R_IRQ_MASK1_SET__sw_int1__BITNR 25
+#define R_IRQ_MASK1_SET__sw_int1__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int1__set 1
+#define R_IRQ_MASK1_SET__sw_int1__nop 0
+#define R_IRQ_MASK1_SET__sw_int0__BITNR 24
+#define R_IRQ_MASK1_SET__sw_int0__WIDTH 1
+#define R_IRQ_MASK1_SET__sw_int0__set 1
+#define R_IRQ_MASK1_SET__sw_int0__nop 0
+#define R_IRQ_MASK1_SET__par1_ecp_cmd__BITNR 19
+#define R_IRQ_MASK1_SET__par1_ecp_cmd__WIDTH 1
+#define R_IRQ_MASK1_SET__par1_ecp_cmd__set 1
+#define R_IRQ_MASK1_SET__par1_ecp_cmd__nop 0
+#define R_IRQ_MASK1_SET__par1_peri__BITNR 18
+#define R_IRQ_MASK1_SET__par1_peri__WIDTH 1
+#define R_IRQ_MASK1_SET__par1_peri__set 1
+#define R_IRQ_MASK1_SET__par1_peri__nop 0
+#define R_IRQ_MASK1_SET__par1_data__BITNR 17
+#define R_IRQ_MASK1_SET__par1_data__WIDTH 1
+#define R_IRQ_MASK1_SET__par1_data__set 1
+#define R_IRQ_MASK1_SET__par1_data__nop 0
+#define R_IRQ_MASK1_SET__par1_ready__BITNR 16
+#define R_IRQ_MASK1_SET__par1_ready__WIDTH 1
+#define R_IRQ_MASK1_SET__par1_ready__set 1
+#define R_IRQ_MASK1_SET__par1_ready__nop 0
+#define R_IRQ_MASK1_SET__scsi1__BITNR 16
+#define R_IRQ_MASK1_SET__scsi1__WIDTH 1
+#define R_IRQ_MASK1_SET__scsi1__set 1
+#define R_IRQ_MASK1_SET__scsi1__nop 0
+#define R_IRQ_MASK1_SET__ser3_ready__BITNR 15
+#define R_IRQ_MASK1_SET__ser3_ready__WIDTH 1
+#define R_IRQ_MASK1_SET__ser3_ready__set 1
+#define R_IRQ_MASK1_SET__ser3_ready__nop 0
+#define R_IRQ_MASK1_SET__ser3_data__BITNR 14
+#define R_IRQ_MASK1_SET__ser3_data__WIDTH 1
+#define R_IRQ_MASK1_SET__ser3_data__set 1
+#define R_IRQ_MASK1_SET__ser3_data__nop 0
+#define R_IRQ_MASK1_SET__ser2_ready__BITNR 13
+#define R_IRQ_MASK1_SET__ser2_ready__WIDTH 1
+#define R_IRQ_MASK1_SET__ser2_ready__set 1
+#define R_IRQ_MASK1_SET__ser2_ready__nop 0
+#define R_IRQ_MASK1_SET__ser2_data__BITNR 12
+#define R_IRQ_MASK1_SET__ser2_data__WIDTH 1
+#define R_IRQ_MASK1_SET__ser2_data__set 1
+#define R_IRQ_MASK1_SET__ser2_data__nop 0
+#define R_IRQ_MASK1_SET__ser1_ready__BITNR 11
+#define R_IRQ_MASK1_SET__ser1_ready__WIDTH 1
+#define R_IRQ_MASK1_SET__ser1_ready__set 1
+#define R_IRQ_MASK1_SET__ser1_ready__nop 0
+#define R_IRQ_MASK1_SET__ser1_data__BITNR 10
+#define R_IRQ_MASK1_SET__ser1_data__WIDTH 1
+#define R_IRQ_MASK1_SET__ser1_data__set 1
+#define R_IRQ_MASK1_SET__ser1_data__nop 0
+#define R_IRQ_MASK1_SET__ser0_ready__BITNR 9
+#define R_IRQ_MASK1_SET__ser0_ready__WIDTH 1
+#define R_IRQ_MASK1_SET__ser0_ready__set 1
+#define R_IRQ_MASK1_SET__ser0_ready__nop 0
+#define R_IRQ_MASK1_SET__ser0_data__BITNR 8
+#define R_IRQ_MASK1_SET__ser0_data__WIDTH 1
+#define R_IRQ_MASK1_SET__ser0_data__set 1
+#define R_IRQ_MASK1_SET__ser0_data__nop 0
+#define R_IRQ_MASK1_SET__pa7__BITNR 7
+#define R_IRQ_MASK1_SET__pa7__WIDTH 1
+#define R_IRQ_MASK1_SET__pa7__set 1
+#define R_IRQ_MASK1_SET__pa7__nop 0
+#define R_IRQ_MASK1_SET__pa6__BITNR 6
+#define R_IRQ_MASK1_SET__pa6__WIDTH 1
+#define R_IRQ_MASK1_SET__pa6__set 1
+#define R_IRQ_MASK1_SET__pa6__nop 0
+#define R_IRQ_MASK1_SET__pa5__BITNR 5
+#define R_IRQ_MASK1_SET__pa5__WIDTH 1
+#define R_IRQ_MASK1_SET__pa5__set 1
+#define R_IRQ_MASK1_SET__pa5__nop 0
+#define R_IRQ_MASK1_SET__pa4__BITNR 4
+#define R_IRQ_MASK1_SET__pa4__WIDTH 1
+#define R_IRQ_MASK1_SET__pa4__set 1
+#define R_IRQ_MASK1_SET__pa4__nop 0
+#define R_IRQ_MASK1_SET__pa3__BITNR 3
+#define R_IRQ_MASK1_SET__pa3__WIDTH 1
+#define R_IRQ_MASK1_SET__pa3__set 1
+#define R_IRQ_MASK1_SET__pa3__nop 0
+#define R_IRQ_MASK1_SET__pa2__BITNR 2
+#define R_IRQ_MASK1_SET__pa2__WIDTH 1
+#define R_IRQ_MASK1_SET__pa2__set 1
+#define R_IRQ_MASK1_SET__pa2__nop 0
+#define R_IRQ_MASK1_SET__pa1__BITNR 1
+#define R_IRQ_MASK1_SET__pa1__WIDTH 1
+#define R_IRQ_MASK1_SET__pa1__set 1
+#define R_IRQ_MASK1_SET__pa1__nop 0
+#define R_IRQ_MASK1_SET__pa0__BITNR 0
+#define R_IRQ_MASK1_SET__pa0__WIDTH 1
+#define R_IRQ_MASK1_SET__pa0__set 1
+#define R_IRQ_MASK1_SET__pa0__nop 0
+
+#define R_IRQ_MASK2_RD (IO_TYPECAST_RO_UDWORD 0xb00000d0)
+#define R_IRQ_MASK2_RD__dma8_sub3_descr__BITNR 23
+#define R_IRQ_MASK2_RD__dma8_sub3_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_sub3_descr__active 1
+#define R_IRQ_MASK2_RD__dma8_sub3_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma8_sub2_descr__BITNR 22
+#define R_IRQ_MASK2_RD__dma8_sub2_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_sub2_descr__active 1
+#define R_IRQ_MASK2_RD__dma8_sub2_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma8_sub1_descr__BITNR 21
+#define R_IRQ_MASK2_RD__dma8_sub1_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_sub1_descr__active 1
+#define R_IRQ_MASK2_RD__dma8_sub1_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma8_sub0_descr__BITNR 20
+#define R_IRQ_MASK2_RD__dma8_sub0_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_sub0_descr__active 1
+#define R_IRQ_MASK2_RD__dma8_sub0_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma9_eop__BITNR 19
+#define R_IRQ_MASK2_RD__dma9_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma9_eop__active 1
+#define R_IRQ_MASK2_RD__dma9_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma9_descr__BITNR 18
+#define R_IRQ_MASK2_RD__dma9_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma9_descr__active 1
+#define R_IRQ_MASK2_RD__dma9_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma8_eop__BITNR 17
+#define R_IRQ_MASK2_RD__dma8_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_eop__active 1
+#define R_IRQ_MASK2_RD__dma8_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma8_descr__BITNR 16
+#define R_IRQ_MASK2_RD__dma8_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma8_descr__active 1
+#define R_IRQ_MASK2_RD__dma8_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma7_eop__BITNR 15
+#define R_IRQ_MASK2_RD__dma7_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma7_eop__active 1
+#define R_IRQ_MASK2_RD__dma7_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma7_descr__BITNR 14
+#define R_IRQ_MASK2_RD__dma7_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma7_descr__active 1
+#define R_IRQ_MASK2_RD__dma7_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma6_eop__BITNR 13
+#define R_IRQ_MASK2_RD__dma6_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma6_eop__active 1
+#define R_IRQ_MASK2_RD__dma6_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma6_descr__BITNR 12
+#define R_IRQ_MASK2_RD__dma6_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma6_descr__active 1
+#define R_IRQ_MASK2_RD__dma6_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma5_eop__BITNR 11
+#define R_IRQ_MASK2_RD__dma5_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma5_eop__active 1
+#define R_IRQ_MASK2_RD__dma5_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma5_descr__BITNR 10
+#define R_IRQ_MASK2_RD__dma5_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma5_descr__active 1
+#define R_IRQ_MASK2_RD__dma5_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma4_eop__BITNR 9
+#define R_IRQ_MASK2_RD__dma4_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma4_eop__active 1
+#define R_IRQ_MASK2_RD__dma4_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma4_descr__BITNR 8
+#define R_IRQ_MASK2_RD__dma4_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma4_descr__active 1
+#define R_IRQ_MASK2_RD__dma4_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma3_eop__BITNR 7
+#define R_IRQ_MASK2_RD__dma3_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma3_eop__active 1
+#define R_IRQ_MASK2_RD__dma3_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma3_descr__BITNR 6
+#define R_IRQ_MASK2_RD__dma3_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma3_descr__active 1
+#define R_IRQ_MASK2_RD__dma3_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma2_eop__BITNR 5
+#define R_IRQ_MASK2_RD__dma2_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma2_eop__active 1
+#define R_IRQ_MASK2_RD__dma2_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma2_descr__BITNR 4
+#define R_IRQ_MASK2_RD__dma2_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma2_descr__active 1
+#define R_IRQ_MASK2_RD__dma2_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma1_eop__BITNR 3
+#define R_IRQ_MASK2_RD__dma1_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma1_eop__active 1
+#define R_IRQ_MASK2_RD__dma1_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma1_descr__BITNR 2
+#define R_IRQ_MASK2_RD__dma1_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma1_descr__active 1
+#define R_IRQ_MASK2_RD__dma1_descr__inactive 0
+#define R_IRQ_MASK2_RD__dma0_eop__BITNR 1
+#define R_IRQ_MASK2_RD__dma0_eop__WIDTH 1
+#define R_IRQ_MASK2_RD__dma0_eop__active 1
+#define R_IRQ_MASK2_RD__dma0_eop__inactive 0
+#define R_IRQ_MASK2_RD__dma0_descr__BITNR 0
+#define R_IRQ_MASK2_RD__dma0_descr__WIDTH 1
+#define R_IRQ_MASK2_RD__dma0_descr__active 1
+#define R_IRQ_MASK2_RD__dma0_descr__inactive 0
+
+#define R_IRQ_MASK2_CLR (IO_TYPECAST_UDWORD 0xb00000d0)
+#define R_IRQ_MASK2_CLR__dma8_sub3_descr__BITNR 23
+#define R_IRQ_MASK2_CLR__dma8_sub3_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_sub3_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma8_sub3_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma8_sub2_descr__BITNR 22
+#define R_IRQ_MASK2_CLR__dma8_sub2_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_sub2_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma8_sub2_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma8_sub1_descr__BITNR 21
+#define R_IRQ_MASK2_CLR__dma8_sub1_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_sub1_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma8_sub1_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma8_sub0_descr__BITNR 20
+#define R_IRQ_MASK2_CLR__dma8_sub0_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_sub0_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma8_sub0_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma9_eop__BITNR 19
+#define R_IRQ_MASK2_CLR__dma9_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma9_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma9_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma9_descr__BITNR 18
+#define R_IRQ_MASK2_CLR__dma9_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma9_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma9_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma8_eop__BITNR 17
+#define R_IRQ_MASK2_CLR__dma8_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma8_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma8_descr__BITNR 16
+#define R_IRQ_MASK2_CLR__dma8_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma8_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma8_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma7_eop__BITNR 15
+#define R_IRQ_MASK2_CLR__dma7_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma7_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma7_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma7_descr__BITNR 14
+#define R_IRQ_MASK2_CLR__dma7_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma7_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma7_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma6_eop__BITNR 13
+#define R_IRQ_MASK2_CLR__dma6_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma6_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma6_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma6_descr__BITNR 12
+#define R_IRQ_MASK2_CLR__dma6_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma6_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma6_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma5_eop__BITNR 11
+#define R_IRQ_MASK2_CLR__dma5_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma5_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma5_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma5_descr__BITNR 10
+#define R_IRQ_MASK2_CLR__dma5_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma5_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma5_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma4_eop__BITNR 9
+#define R_IRQ_MASK2_CLR__dma4_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma4_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma4_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma4_descr__BITNR 8
+#define R_IRQ_MASK2_CLR__dma4_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma4_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma4_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma3_eop__BITNR 7
+#define R_IRQ_MASK2_CLR__dma3_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma3_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma3_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma3_descr__BITNR 6
+#define R_IRQ_MASK2_CLR__dma3_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma3_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma3_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma2_eop__BITNR 5
+#define R_IRQ_MASK2_CLR__dma2_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma2_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma2_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma2_descr__BITNR 4
+#define R_IRQ_MASK2_CLR__dma2_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma2_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma2_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma1_eop__BITNR 3
+#define R_IRQ_MASK2_CLR__dma1_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma1_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma1_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma1_descr__BITNR 2
+#define R_IRQ_MASK2_CLR__dma1_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma1_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma1_descr__nop 0
+#define R_IRQ_MASK2_CLR__dma0_eop__BITNR 1
+#define R_IRQ_MASK2_CLR__dma0_eop__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma0_eop__clr 1
+#define R_IRQ_MASK2_CLR__dma0_eop__nop 0
+#define R_IRQ_MASK2_CLR__dma0_descr__BITNR 0
+#define R_IRQ_MASK2_CLR__dma0_descr__WIDTH 1
+#define R_IRQ_MASK2_CLR__dma0_descr__clr 1
+#define R_IRQ_MASK2_CLR__dma0_descr__nop 0
+
+#define R_IRQ_READ2 (IO_TYPECAST_RO_UDWORD 0xb00000d4)
+#define R_IRQ_READ2__dma8_sub3_descr__BITNR 23
+#define R_IRQ_READ2__dma8_sub3_descr__WIDTH 1
+#define R_IRQ_READ2__dma8_sub3_descr__active 1
+#define R_IRQ_READ2__dma8_sub3_descr__inactive 0
+#define R_IRQ_READ2__dma8_sub2_descr__BITNR 22
+#define R_IRQ_READ2__dma8_sub2_descr__WIDTH 1
+#define R_IRQ_READ2__dma8_sub2_descr__active 1
+#define R_IRQ_READ2__dma8_sub2_descr__inactive 0
+#define R_IRQ_READ2__dma8_sub1_descr__BITNR 21
+#define R_IRQ_READ2__dma8_sub1_descr__WIDTH 1
+#define R_IRQ_READ2__dma8_sub1_descr__active 1
+#define R_IRQ_READ2__dma8_sub1_descr__inactive 0
+#define R_IRQ_READ2__dma8_sub0_descr__BITNR 20
+#define R_IRQ_READ2__dma8_sub0_descr__WIDTH 1
+#define R_IRQ_READ2__dma8_sub0_descr__active 1
+#define R_IRQ_READ2__dma8_sub0_descr__inactive 0
+#define R_IRQ_READ2__dma9_eop__BITNR 19
+#define R_IRQ_READ2__dma9_eop__WIDTH 1
+#define R_IRQ_READ2__dma9_eop__active 1
+#define R_IRQ_READ2__dma9_eop__inactive 0
+#define R_IRQ_READ2__dma9_descr__BITNR 18
+#define R_IRQ_READ2__dma9_descr__WIDTH 1
+#define R_IRQ_READ2__dma9_descr__active 1
+#define R_IRQ_READ2__dma9_descr__inactive 0
+#define R_IRQ_READ2__dma8_eop__BITNR 17
+#define R_IRQ_READ2__dma8_eop__WIDTH 1
+#define R_IRQ_READ2__dma8_eop__active 1
+#define R_IRQ_READ2__dma8_eop__inactive 0
+#define R_IRQ_READ2__dma8_descr__BITNR 16
+#define R_IRQ_READ2__dma8_descr__WIDTH 1
+#define R_IRQ_READ2__dma8_descr__active 1
+#define R_IRQ_READ2__dma8_descr__inactive 0
+#define R_IRQ_READ2__dma7_eop__BITNR 15
+#define R_IRQ_READ2__dma7_eop__WIDTH 1
+#define R_IRQ_READ2__dma7_eop__active 1
+#define R_IRQ_READ2__dma7_eop__inactive 0
+#define R_IRQ_READ2__dma7_descr__BITNR 14
+#define R_IRQ_READ2__dma7_descr__WIDTH 1
+#define R_IRQ_READ2__dma7_descr__active 1
+#define R_IRQ_READ2__dma7_descr__inactive 0
+#define R_IRQ_READ2__dma6_eop__BITNR 13
+#define R_IRQ_READ2__dma6_eop__WIDTH 1
+#define R_IRQ_READ2__dma6_eop__active 1
+#define R_IRQ_READ2__dma6_eop__inactive 0
+#define R_IRQ_READ2__dma6_descr__BITNR 12
+#define R_IRQ_READ2__dma6_descr__WIDTH 1
+#define R_IRQ_READ2__dma6_descr__active 1
+#define R_IRQ_READ2__dma6_descr__inactive 0
+#define R_IRQ_READ2__dma5_eop__BITNR 11
+#define R_IRQ_READ2__dma5_eop__WIDTH 1
+#define R_IRQ_READ2__dma5_eop__active 1
+#define R_IRQ_READ2__dma5_eop__inactive 0
+#define R_IRQ_READ2__dma5_descr__BITNR 10
+#define R_IRQ_READ2__dma5_descr__WIDTH 1
+#define R_IRQ_READ2__dma5_descr__active 1
+#define R_IRQ_READ2__dma5_descr__inactive 0
+#define R_IRQ_READ2__dma4_eop__BITNR 9
+#define R_IRQ_READ2__dma4_eop__WIDTH 1
+#define R_IRQ_READ2__dma4_eop__active 1
+#define R_IRQ_READ2__dma4_eop__inactive 0
+#define R_IRQ_READ2__dma4_descr__BITNR 8
+#define R_IRQ_READ2__dma4_descr__WIDTH 1
+#define R_IRQ_READ2__dma4_descr__active 1
+#define R_IRQ_READ2__dma4_descr__inactive 0
+#define R_IRQ_READ2__dma3_eop__BITNR 7
+#define R_IRQ_READ2__dma3_eop__WIDTH 1
+#define R_IRQ_READ2__dma3_eop__active 1
+#define R_IRQ_READ2__dma3_eop__inactive 0
+#define R_IRQ_READ2__dma3_descr__BITNR 6
+#define R_IRQ_READ2__dma3_descr__WIDTH 1
+#define R_IRQ_READ2__dma3_descr__active 1
+#define R_IRQ_READ2__dma3_descr__inactive 0
+#define R_IRQ_READ2__dma2_eop__BITNR 5
+#define R_IRQ_READ2__dma2_eop__WIDTH 1
+#define R_IRQ_READ2__dma2_eop__active 1
+#define R_IRQ_READ2__dma2_eop__inactive 0
+#define R_IRQ_READ2__dma2_descr__BITNR 4
+#define R_IRQ_READ2__dma2_descr__WIDTH 1
+#define R_IRQ_READ2__dma2_descr__active 1
+#define R_IRQ_READ2__dma2_descr__inactive 0
+#define R_IRQ_READ2__dma1_eop__BITNR 3
+#define R_IRQ_READ2__dma1_eop__WIDTH 1
+#define R_IRQ_READ2__dma1_eop__active 1
+#define R_IRQ_READ2__dma1_eop__inactive 0
+#define R_IRQ_READ2__dma1_descr__BITNR 2
+#define R_IRQ_READ2__dma1_descr__WIDTH 1
+#define R_IRQ_READ2__dma1_descr__active 1
+#define R_IRQ_READ2__dma1_descr__inactive 0
+#define R_IRQ_READ2__dma0_eop__BITNR 1
+#define R_IRQ_READ2__dma0_eop__WIDTH 1
+#define R_IRQ_READ2__dma0_eop__active 1
+#define R_IRQ_READ2__dma0_eop__inactive 0
+#define R_IRQ_READ2__dma0_descr__BITNR 0
+#define R_IRQ_READ2__dma0_descr__WIDTH 1
+#define R_IRQ_READ2__dma0_descr__active 1
+#define R_IRQ_READ2__dma0_descr__inactive 0
+
+#define R_IRQ_MASK2_SET (IO_TYPECAST_UDWORD 0xb00000d4)
+#define R_IRQ_MASK2_SET__dma8_sub3_descr__BITNR 23
+#define R_IRQ_MASK2_SET__dma8_sub3_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_sub3_descr__set 1
+#define R_IRQ_MASK2_SET__dma8_sub3_descr__nop 0
+#define R_IRQ_MASK2_SET__dma8_sub2_descr__BITNR 22
+#define R_IRQ_MASK2_SET__dma8_sub2_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_sub2_descr__set 1
+#define R_IRQ_MASK2_SET__dma8_sub2_descr__nop 0
+#define R_IRQ_MASK2_SET__dma8_sub1_descr__BITNR 21
+#define R_IRQ_MASK2_SET__dma8_sub1_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_sub1_descr__set 1
+#define R_IRQ_MASK2_SET__dma8_sub1_descr__nop 0
+#define R_IRQ_MASK2_SET__dma8_sub0_descr__BITNR 20
+#define R_IRQ_MASK2_SET__dma8_sub0_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_sub0_descr__set 1
+#define R_IRQ_MASK2_SET__dma8_sub0_descr__nop 0
+#define R_IRQ_MASK2_SET__dma9_eop__BITNR 19
+#define R_IRQ_MASK2_SET__dma9_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma9_eop__set 1
+#define R_IRQ_MASK2_SET__dma9_eop__nop 0
+#define R_IRQ_MASK2_SET__dma9_descr__BITNR 18
+#define R_IRQ_MASK2_SET__dma9_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma9_descr__set 1
+#define R_IRQ_MASK2_SET__dma9_descr__nop 0
+#define R_IRQ_MASK2_SET__dma8_eop__BITNR 17
+#define R_IRQ_MASK2_SET__dma8_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_eop__set 1
+#define R_IRQ_MASK2_SET__dma8_eop__nop 0
+#define R_IRQ_MASK2_SET__dma8_descr__BITNR 16
+#define R_IRQ_MASK2_SET__dma8_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma8_descr__set 1
+#define R_IRQ_MASK2_SET__dma8_descr__nop 0
+#define R_IRQ_MASK2_SET__dma7_eop__BITNR 15
+#define R_IRQ_MASK2_SET__dma7_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma7_eop__set 1
+#define R_IRQ_MASK2_SET__dma7_eop__nop 0
+#define R_IRQ_MASK2_SET__dma7_descr__BITNR 14
+#define R_IRQ_MASK2_SET__dma7_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma7_descr__set 1
+#define R_IRQ_MASK2_SET__dma7_descr__nop 0
+#define R_IRQ_MASK2_SET__dma6_eop__BITNR 13
+#define R_IRQ_MASK2_SET__dma6_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma6_eop__set 1
+#define R_IRQ_MASK2_SET__dma6_eop__nop 0
+#define R_IRQ_MASK2_SET__dma6_descr__BITNR 12
+#define R_IRQ_MASK2_SET__dma6_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma6_descr__set 1
+#define R_IRQ_MASK2_SET__dma6_descr__nop 0
+#define R_IRQ_MASK2_SET__dma5_eop__BITNR 11
+#define R_IRQ_MASK2_SET__dma5_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma5_eop__set 1
+#define R_IRQ_MASK2_SET__dma5_eop__nop 0
+#define R_IRQ_MASK2_SET__dma5_descr__BITNR 10
+#define R_IRQ_MASK2_SET__dma5_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma5_descr__set 1
+#define R_IRQ_MASK2_SET__dma5_descr__nop 0
+#define R_IRQ_MASK2_SET__dma4_eop__BITNR 9
+#define R_IRQ_MASK2_SET__dma4_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma4_eop__set 1
+#define R_IRQ_MASK2_SET__dma4_eop__nop 0
+#define R_IRQ_MASK2_SET__dma4_descr__BITNR 8
+#define R_IRQ_MASK2_SET__dma4_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma4_descr__set 1
+#define R_IRQ_MASK2_SET__dma4_descr__nop 0
+#define R_IRQ_MASK2_SET__dma3_eop__BITNR 7
+#define R_IRQ_MASK2_SET__dma3_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma3_eop__set 1
+#define R_IRQ_MASK2_SET__dma3_eop__nop 0
+#define R_IRQ_MASK2_SET__dma3_descr__BITNR 6
+#define R_IRQ_MASK2_SET__dma3_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma3_descr__set 1
+#define R_IRQ_MASK2_SET__dma3_descr__nop 0
+#define R_IRQ_MASK2_SET__dma2_eop__BITNR 5
+#define R_IRQ_MASK2_SET__dma2_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma2_eop__set 1
+#define R_IRQ_MASK2_SET__dma2_eop__nop 0
+#define R_IRQ_MASK2_SET__dma2_descr__BITNR 4
+#define R_IRQ_MASK2_SET__dma2_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma2_descr__set 1
+#define R_IRQ_MASK2_SET__dma2_descr__nop 0
+#define R_IRQ_MASK2_SET__dma1_eop__BITNR 3
+#define R_IRQ_MASK2_SET__dma1_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma1_eop__set 1
+#define R_IRQ_MASK2_SET__dma1_eop__nop 0
+#define R_IRQ_MASK2_SET__dma1_descr__BITNR 2
+#define R_IRQ_MASK2_SET__dma1_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma1_descr__set 1
+#define R_IRQ_MASK2_SET__dma1_descr__nop 0
+#define R_IRQ_MASK2_SET__dma0_eop__BITNR 1
+#define R_IRQ_MASK2_SET__dma0_eop__WIDTH 1
+#define R_IRQ_MASK2_SET__dma0_eop__set 1
+#define R_IRQ_MASK2_SET__dma0_eop__nop 0
+#define R_IRQ_MASK2_SET__dma0_descr__BITNR 0
+#define R_IRQ_MASK2_SET__dma0_descr__WIDTH 1
+#define R_IRQ_MASK2_SET__dma0_descr__set 1
+#define R_IRQ_MASK2_SET__dma0_descr__nop 0
+
+#define R_VECT_MASK_RD (IO_TYPECAST_RO_UDWORD 0xb00000d8)
+#define R_VECT_MASK_RD__usb__BITNR 31
+#define R_VECT_MASK_RD__usb__WIDTH 1
+#define R_VECT_MASK_RD__usb__active 1
+#define R_VECT_MASK_RD__usb__inactive 0
+#define R_VECT_MASK_RD__dma9__BITNR 25
+#define R_VECT_MASK_RD__dma9__WIDTH 1
+#define R_VECT_MASK_RD__dma9__active 1
+#define R_VECT_MASK_RD__dma9__inactive 0
+#define R_VECT_MASK_RD__dma8__BITNR 24
+#define R_VECT_MASK_RD__dma8__WIDTH 1
+#define R_VECT_MASK_RD__dma8__active 1
+#define R_VECT_MASK_RD__dma8__inactive 0
+#define R_VECT_MASK_RD__dma7__BITNR 23
+#define R_VECT_MASK_RD__dma7__WIDTH 1
+#define R_VECT_MASK_RD__dma7__active 1
+#define R_VECT_MASK_RD__dma7__inactive 0
+#define R_VECT_MASK_RD__dma6__BITNR 22
+#define R_VECT_MASK_RD__dma6__WIDTH 1
+#define R_VECT_MASK_RD__dma6__active 1
+#define R_VECT_MASK_RD__dma6__inactive 0
+#define R_VECT_MASK_RD__dma5__BITNR 21
+#define R_VECT_MASK_RD__dma5__WIDTH 1
+#define R_VECT_MASK_RD__dma5__active 1
+#define R_VECT_MASK_RD__dma5__inactive 0
+#define R_VECT_MASK_RD__dma4__BITNR 20
+#define R_VECT_MASK_RD__dma4__WIDTH 1
+#define R_VECT_MASK_RD__dma4__active 1
+#define R_VECT_MASK_RD__dma4__inactive 0
+#define R_VECT_MASK_RD__dma3__BITNR 19
+#define R_VECT_MASK_RD__dma3__WIDTH 1
+#define R_VECT_MASK_RD__dma3__active 1
+#define R_VECT_MASK_RD__dma3__inactive 0
+#define R_VECT_MASK_RD__dma2__BITNR 18
+#define R_VECT_MASK_RD__dma2__WIDTH 1
+#define R_VECT_MASK_RD__dma2__active 1
+#define R_VECT_MASK_RD__dma2__inactive 0
+#define R_VECT_MASK_RD__dma1__BITNR 17
+#define R_VECT_MASK_RD__dma1__WIDTH 1
+#define R_VECT_MASK_RD__dma1__active 1
+#define R_VECT_MASK_RD__dma1__inactive 0
+#define R_VECT_MASK_RD__dma0__BITNR 16
+#define R_VECT_MASK_RD__dma0__WIDTH 1
+#define R_VECT_MASK_RD__dma0__active 1
+#define R_VECT_MASK_RD__dma0__inactive 0
+#define R_VECT_MASK_RD__ext_dma1__BITNR 13
+#define R_VECT_MASK_RD__ext_dma1__WIDTH 1
+#define R_VECT_MASK_RD__ext_dma1__active 1
+#define R_VECT_MASK_RD__ext_dma1__inactive 0
+#define R_VECT_MASK_RD__ext_dma0__BITNR 12
+#define R_VECT_MASK_RD__ext_dma0__WIDTH 1
+#define R_VECT_MASK_RD__ext_dma0__active 1
+#define R_VECT_MASK_RD__ext_dma0__inactive 0
+#define R_VECT_MASK_RD__pa__BITNR 11
+#define R_VECT_MASK_RD__pa__WIDTH 1
+#define R_VECT_MASK_RD__pa__active 1
+#define R_VECT_MASK_RD__pa__inactive 0
+#define R_VECT_MASK_RD__irq_intnr__BITNR 10
+#define R_VECT_MASK_RD__irq_intnr__WIDTH 1
+#define R_VECT_MASK_RD__irq_intnr__active 1
+#define R_VECT_MASK_RD__irq_intnr__inactive 0
+#define R_VECT_MASK_RD__sw__BITNR 9
+#define R_VECT_MASK_RD__sw__WIDTH 1
+#define R_VECT_MASK_RD__sw__active 1
+#define R_VECT_MASK_RD__sw__inactive 0
+#define R_VECT_MASK_RD__serial__BITNR 8
+#define R_VECT_MASK_RD__serial__WIDTH 1
+#define R_VECT_MASK_RD__serial__active 1
+#define R_VECT_MASK_RD__serial__inactive 0
+#define R_VECT_MASK_RD__snmp__BITNR 7
+#define R_VECT_MASK_RD__snmp__WIDTH 1
+#define R_VECT_MASK_RD__snmp__active 1
+#define R_VECT_MASK_RD__snmp__inactive 0
+#define R_VECT_MASK_RD__network__BITNR 6
+#define R_VECT_MASK_RD__network__WIDTH 1
+#define R_VECT_MASK_RD__network__active 1
+#define R_VECT_MASK_RD__network__inactive 0
+#define R_VECT_MASK_RD__scsi1__BITNR 5
+#define R_VECT_MASK_RD__scsi1__WIDTH 1
+#define R_VECT_MASK_RD__scsi1__active 1
+#define R_VECT_MASK_RD__scsi1__inactive 0
+#define R_VECT_MASK_RD__par1__BITNR 5
+#define R_VECT_MASK_RD__par1__WIDTH 1
+#define R_VECT_MASK_RD__par1__active 1
+#define R_VECT_MASK_RD__par1__inactive 0
+#define R_VECT_MASK_RD__scsi0__BITNR 4
+#define R_VECT_MASK_RD__scsi0__WIDTH 1
+#define R_VECT_MASK_RD__scsi0__active 1
+#define R_VECT_MASK_RD__scsi0__inactive 0
+#define R_VECT_MASK_RD__par0__BITNR 4
+#define R_VECT_MASK_RD__par0__WIDTH 1
+#define R_VECT_MASK_RD__par0__active 1
+#define R_VECT_MASK_RD__par0__inactive 0
+#define R_VECT_MASK_RD__ata__BITNR 4
+#define R_VECT_MASK_RD__ata__WIDTH 1
+#define R_VECT_MASK_RD__ata__active 1
+#define R_VECT_MASK_RD__ata__inactive 0
+#define R_VECT_MASK_RD__mio__BITNR 4
+#define R_VECT_MASK_RD__mio__WIDTH 1
+#define R_VECT_MASK_RD__mio__active 1
+#define R_VECT_MASK_RD__mio__inactive 0
+#define R_VECT_MASK_RD__timer1__BITNR 3
+#define R_VECT_MASK_RD__timer1__WIDTH 1
+#define R_VECT_MASK_RD__timer1__active 1
+#define R_VECT_MASK_RD__timer1__inactive 0
+#define R_VECT_MASK_RD__timer0__BITNR 2
+#define R_VECT_MASK_RD__timer0__WIDTH 1
+#define R_VECT_MASK_RD__timer0__active 1
+#define R_VECT_MASK_RD__timer0__inactive 0
+#define R_VECT_MASK_RD__nmi__BITNR 1
+#define R_VECT_MASK_RD__nmi__WIDTH 1
+#define R_VECT_MASK_RD__nmi__active 1
+#define R_VECT_MASK_RD__nmi__inactive 0
+#define R_VECT_MASK_RD__some__BITNR 0
+#define R_VECT_MASK_RD__some__WIDTH 1
+#define R_VECT_MASK_RD__some__active 1
+#define R_VECT_MASK_RD__some__inactive 0
+
+#define R_VECT_MASK_CLR (IO_TYPECAST_UDWORD 0xb00000d8)
+#define R_VECT_MASK_CLR__usb__BITNR 31
+#define R_VECT_MASK_CLR__usb__WIDTH 1
+#define R_VECT_MASK_CLR__usb__clr 1
+#define R_VECT_MASK_CLR__usb__nop 0
+#define R_VECT_MASK_CLR__dma9__BITNR 25
+#define R_VECT_MASK_CLR__dma9__WIDTH 1
+#define R_VECT_MASK_CLR__dma9__clr 1
+#define R_VECT_MASK_CLR__dma9__nop 0
+#define R_VECT_MASK_CLR__dma8__BITNR 24
+#define R_VECT_MASK_CLR__dma8__WIDTH 1
+#define R_VECT_MASK_CLR__dma8__clr 1
+#define R_VECT_MASK_CLR__dma8__nop 0
+#define R_VECT_MASK_CLR__dma7__BITNR 23
+#define R_VECT_MASK_CLR__dma7__WIDTH 1
+#define R_VECT_MASK_CLR__dma7__clr 1
+#define R_VECT_MASK_CLR__dma7__nop 0
+#define R_VECT_MASK_CLR__dma6__BITNR 22
+#define R_VECT_MASK_CLR__dma6__WIDTH 1
+#define R_VECT_MASK_CLR__dma6__clr 1
+#define R_VECT_MASK_CLR__dma6__nop 0
+#define R_VECT_MASK_CLR__dma5__BITNR 21
+#define R_VECT_MASK_CLR__dma5__WIDTH 1
+#define R_VECT_MASK_CLR__dma5__clr 1
+#define R_VECT_MASK_CLR__dma5__nop 0
+#define R_VECT_MASK_CLR__dma4__BITNR 20
+#define R_VECT_MASK_CLR__dma4__WIDTH 1
+#define R_VECT_MASK_CLR__dma4__clr 1
+#define R_VECT_MASK_CLR__dma4__nop 0
+#define R_VECT_MASK_CLR__dma3__BITNR 19
+#define R_VECT_MASK_CLR__dma3__WIDTH 1
+#define R_VECT_MASK_CLR__dma3__clr 1
+#define R_VECT_MASK_CLR__dma3__nop 0
+#define R_VECT_MASK_CLR__dma2__BITNR 18
+#define R_VECT_MASK_CLR__dma2__WIDTH 1
+#define R_VECT_MASK_CLR__dma2__clr 1
+#define R_VECT_MASK_CLR__dma2__nop 0
+#define R_VECT_MASK_CLR__dma1__BITNR 17
+#define R_VECT_MASK_CLR__dma1__WIDTH 1
+#define R_VECT_MASK_CLR__dma1__clr 1
+#define R_VECT_MASK_CLR__dma1__nop 0
+#define R_VECT_MASK_CLR__dma0__BITNR 16
+#define R_VECT_MASK_CLR__dma0__WIDTH 1
+#define R_VECT_MASK_CLR__dma0__clr 1
+#define R_VECT_MASK_CLR__dma0__nop 0
+#define R_VECT_MASK_CLR__ext_dma1__BITNR 13
+#define R_VECT_MASK_CLR__ext_dma1__WIDTH 1
+#define R_VECT_MASK_CLR__ext_dma1__clr 1
+#define R_VECT_MASK_CLR__ext_dma1__nop 0
+#define R_VECT_MASK_CLR__ext_dma0__BITNR 12
+#define R_VECT_MASK_CLR__ext_dma0__WIDTH 1
+#define R_VECT_MASK_CLR__ext_dma0__clr 1
+#define R_VECT_MASK_CLR__ext_dma0__nop 0
+#define R_VECT_MASK_CLR__pa__BITNR 11
+#define R_VECT_MASK_CLR__pa__WIDTH 1
+#define R_VECT_MASK_CLR__pa__clr 1
+#define R_VECT_MASK_CLR__pa__nop 0
+#define R_VECT_MASK_CLR__irq_intnr__BITNR 10
+#define R_VECT_MASK_CLR__irq_intnr__WIDTH 1
+#define R_VECT_MASK_CLR__irq_intnr__clr 1
+#define R_VECT_MASK_CLR__irq_intnr__nop 0
+#define R_VECT_MASK_CLR__sw__BITNR 9
+#define R_VECT_MASK_CLR__sw__WIDTH 1
+#define R_VECT_MASK_CLR__sw__clr 1
+#define R_VECT_MASK_CLR__sw__nop 0
+#define R_VECT_MASK_CLR__serial__BITNR 8
+#define R_VECT_MASK_CLR__serial__WIDTH 1
+#define R_VECT_MASK_CLR__serial__clr 1
+#define R_VECT_MASK_CLR__serial__nop 0
+#define R_VECT_MASK_CLR__snmp__BITNR 7
+#define R_VECT_MASK_CLR__snmp__WIDTH 1
+#define R_VECT_MASK_CLR__snmp__clr 1
+#define R_VECT_MASK_CLR__snmp__nop 0
+#define R_VECT_MASK_CLR__network__BITNR 6
+#define R_VECT_MASK_CLR__network__WIDTH 1
+#define R_VECT_MASK_CLR__network__clr 1
+#define R_VECT_MASK_CLR__network__nop 0
+#define R_VECT_MASK_CLR__scsi1__BITNR 5
+#define R_VECT_MASK_CLR__scsi1__WIDTH 1
+#define R_VECT_MASK_CLR__scsi1__clr 1
+#define R_VECT_MASK_CLR__scsi1__nop 0
+#define R_VECT_MASK_CLR__par1__BITNR 5
+#define R_VECT_MASK_CLR__par1__WIDTH 1
+#define R_VECT_MASK_CLR__par1__clr 1
+#define R_VECT_MASK_CLR__par1__nop 0
+#define R_VECT_MASK_CLR__scsi0__BITNR 4
+#define R_VECT_MASK_CLR__scsi0__WIDTH 1
+#define R_VECT_MASK_CLR__scsi0__clr 1
+#define R_VECT_MASK_CLR__scsi0__nop 0
+#define R_VECT_MASK_CLR__par0__BITNR 4
+#define R_VECT_MASK_CLR__par0__WIDTH 1
+#define R_VECT_MASK_CLR__par0__clr 1
+#define R_VECT_MASK_CLR__par0__nop 0
+#define R_VECT_MASK_CLR__ata__BITNR 4
+#define R_VECT_MASK_CLR__ata__WIDTH 1
+#define R_VECT_MASK_CLR__ata__clr 1
+#define R_VECT_MASK_CLR__ata__nop 0
+#define R_VECT_MASK_CLR__mio__BITNR 4
+#define R_VECT_MASK_CLR__mio__WIDTH 1
+#define R_VECT_MASK_CLR__mio__clr 1
+#define R_VECT_MASK_CLR__mio__nop 0
+#define R_VECT_MASK_CLR__timer1__BITNR 3
+#define R_VECT_MASK_CLR__timer1__WIDTH 1
+#define R_VECT_MASK_CLR__timer1__clr 1
+#define R_VECT_MASK_CLR__timer1__nop 0
+#define R_VECT_MASK_CLR__timer0__BITNR 2
+#define R_VECT_MASK_CLR__timer0__WIDTH 1
+#define R_VECT_MASK_CLR__timer0__clr 1
+#define R_VECT_MASK_CLR__timer0__nop 0
+#define R_VECT_MASK_CLR__nmi__BITNR 1
+#define R_VECT_MASK_CLR__nmi__WIDTH 1
+#define R_VECT_MASK_CLR__nmi__clr 1
+#define R_VECT_MASK_CLR__nmi__nop 0
+#define R_VECT_MASK_CLR__some__BITNR 0
+#define R_VECT_MASK_CLR__some__WIDTH 1
+#define R_VECT_MASK_CLR__some__clr 1
+#define R_VECT_MASK_CLR__some__nop 0
+
+#define R_VECT_READ (IO_TYPECAST_RO_UDWORD 0xb00000dc)
+#define R_VECT_READ__usb__BITNR 31
+#define R_VECT_READ__usb__WIDTH 1
+#define R_VECT_READ__usb__active 1
+#define R_VECT_READ__usb__inactive 0
+#define R_VECT_READ__dma9__BITNR 25
+#define R_VECT_READ__dma9__WIDTH 1
+#define R_VECT_READ__dma9__active 1
+#define R_VECT_READ__dma9__inactive 0
+#define R_VECT_READ__dma8__BITNR 24
+#define R_VECT_READ__dma8__WIDTH 1
+#define R_VECT_READ__dma8__active 1
+#define R_VECT_READ__dma8__inactive 0
+#define R_VECT_READ__dma7__BITNR 23
+#define R_VECT_READ__dma7__WIDTH 1
+#define R_VECT_READ__dma7__active 1
+#define R_VECT_READ__dma7__inactive 0
+#define R_VECT_READ__dma6__BITNR 22
+#define R_VECT_READ__dma6__WIDTH 1
+#define R_VECT_READ__dma6__active 1
+#define R_VECT_READ__dma6__inactive 0
+#define R_VECT_READ__dma5__BITNR 21
+#define R_VECT_READ__dma5__WIDTH 1
+#define R_VECT_READ__dma5__active 1
+#define R_VECT_READ__dma5__inactive 0
+#define R_VECT_READ__dma4__BITNR 20
+#define R_VECT_READ__dma4__WIDTH 1
+#define R_VECT_READ__dma4__active 1
+#define R_VECT_READ__dma4__inactive 0
+#define R_VECT_READ__dma3__BITNR 19
+#define R_VECT_READ__dma3__WIDTH 1
+#define R_VECT_READ__dma3__active 1
+#define R_VECT_READ__dma3__inactive 0
+#define R_VECT_READ__dma2__BITNR 18
+#define R_VECT_READ__dma2__WIDTH 1
+#define R_VECT_READ__dma2__active 1
+#define R_VECT_READ__dma2__inactive 0
+#define R_VECT_READ__dma1__BITNR 17
+#define R_VECT_READ__dma1__WIDTH 1
+#define R_VECT_READ__dma1__active 1
+#define R_VECT_READ__dma1__inactive 0
+#define R_VECT_READ__dma0__BITNR 16
+#define R_VECT_READ__dma0__WIDTH 1
+#define R_VECT_READ__dma0__active 1
+#define R_VECT_READ__dma0__inactive 0
+#define R_VECT_READ__ext_dma1__BITNR 13
+#define R_VECT_READ__ext_dma1__WIDTH 1
+#define R_VECT_READ__ext_dma1__active 1
+#define R_VECT_READ__ext_dma1__inactive 0
+#define R_VECT_READ__ext_dma0__BITNR 12
+#define R_VECT_READ__ext_dma0__WIDTH 1
+#define R_VECT_READ__ext_dma0__active 1
+#define R_VECT_READ__ext_dma0__inactive 0
+#define R_VECT_READ__pa__BITNR 11
+#define R_VECT_READ__pa__WIDTH 1
+#define R_VECT_READ__pa__active 1
+#define R_VECT_READ__pa__inactive 0
+#define R_VECT_READ__irq_intnr__BITNR 10
+#define R_VECT_READ__irq_intnr__WIDTH 1
+#define R_VECT_READ__irq_intnr__active 1
+#define R_VECT_READ__irq_intnr__inactive 0
+#define R_VECT_READ__sw__BITNR 9
+#define R_VECT_READ__sw__WIDTH 1
+#define R_VECT_READ__sw__active 1
+#define R_VECT_READ__sw__inactive 0
+#define R_VECT_READ__serial__BITNR 8
+#define R_VECT_READ__serial__WIDTH 1
+#define R_VECT_READ__serial__active 1
+#define R_VECT_READ__serial__inactive 0
+#define R_VECT_READ__snmp__BITNR 7
+#define R_VECT_READ__snmp__WIDTH 1
+#define R_VECT_READ__snmp__active 1
+#define R_VECT_READ__snmp__inactive 0
+#define R_VECT_READ__network__BITNR 6
+#define R_VECT_READ__network__WIDTH 1
+#define R_VECT_READ__network__active 1
+#define R_VECT_READ__network__inactive 0
+#define R_VECT_READ__scsi1__BITNR 5
+#define R_VECT_READ__scsi1__WIDTH 1
+#define R_VECT_READ__scsi1__active 1
+#define R_VECT_READ__scsi1__inactive 0
+#define R_VECT_READ__par1__BITNR 5
+#define R_VECT_READ__par1__WIDTH 1
+#define R_VECT_READ__par1__active 1
+#define R_VECT_READ__par1__inactive 0
+#define R_VECT_READ__scsi0__BITNR 4
+#define R_VECT_READ__scsi0__WIDTH 1
+#define R_VECT_READ__scsi0__active 1
+#define R_VECT_READ__scsi0__inactive 0
+#define R_VECT_READ__par0__BITNR 4
+#define R_VECT_READ__par0__WIDTH 1
+#define R_VECT_READ__par0__active 1
+#define R_VECT_READ__par0__inactive 0
+#define R_VECT_READ__ata__BITNR 4
+#define R_VECT_READ__ata__WIDTH 1
+#define R_VECT_READ__ata__active 1
+#define R_VECT_READ__ata__inactive 0
+#define R_VECT_READ__mio__BITNR 4
+#define R_VECT_READ__mio__WIDTH 1
+#define R_VECT_READ__mio__active 1
+#define R_VECT_READ__mio__inactive 0
+#define R_VECT_READ__timer1__BITNR 3
+#define R_VECT_READ__timer1__WIDTH 1
+#define R_VECT_READ__timer1__active 1
+#define R_VECT_READ__timer1__inactive 0
+#define R_VECT_READ__timer0__BITNR 2
+#define R_VECT_READ__timer0__WIDTH 1
+#define R_VECT_READ__timer0__active 1
+#define R_VECT_READ__timer0__inactive 0
+#define R_VECT_READ__nmi__BITNR 1
+#define R_VECT_READ__nmi__WIDTH 1
+#define R_VECT_READ__nmi__active 1
+#define R_VECT_READ__nmi__inactive 0
+#define R_VECT_READ__some__BITNR 0
+#define R_VECT_READ__some__WIDTH 1
+#define R_VECT_READ__some__active 1
+#define R_VECT_READ__some__inactive 0
+
+#define R_VECT_MASK_SET (IO_TYPECAST_UDWORD 0xb00000dc)
+#define R_VECT_MASK_SET__usb__BITNR 31
+#define R_VECT_MASK_SET__usb__WIDTH 1
+#define R_VECT_MASK_SET__usb__set 1
+#define R_VECT_MASK_SET__usb__nop 0
+#define R_VECT_MASK_SET__dma9__BITNR 25
+#define R_VECT_MASK_SET__dma9__WIDTH 1
+#define R_VECT_MASK_SET__dma9__set 1
+#define R_VECT_MASK_SET__dma9__nop 0
+#define R_VECT_MASK_SET__dma8__BITNR 24
+#define R_VECT_MASK_SET__dma8__WIDTH 1
+#define R_VECT_MASK_SET__dma8__set 1
+#define R_VECT_MASK_SET__dma8__nop 0
+#define R_VECT_MASK_SET__dma7__BITNR 23
+#define R_VECT_MASK_SET__dma7__WIDTH 1
+#define R_VECT_MASK_SET__dma7__set 1
+#define R_VECT_MASK_SET__dma7__nop 0
+#define R_VECT_MASK_SET__dma6__BITNR 22
+#define R_VECT_MASK_SET__dma6__WIDTH 1
+#define R_VECT_MASK_SET__dma6__set 1
+#define R_VECT_MASK_SET__dma6__nop 0
+#define R_VECT_MASK_SET__dma5__BITNR 21
+#define R_VECT_MASK_SET__dma5__WIDTH 1
+#define R_VECT_MASK_SET__dma5__set 1
+#define R_VECT_MASK_SET__dma5__nop 0
+#define R_VECT_MASK_SET__dma4__BITNR 20
+#define R_VECT_MASK_SET__dma4__WIDTH 1
+#define R_VECT_MASK_SET__dma4__set 1
+#define R_VECT_MASK_SET__dma4__nop 0
+#define R_VECT_MASK_SET__dma3__BITNR 19
+#define R_VECT_MASK_SET__dma3__WIDTH 1
+#define R_VECT_MASK_SET__dma3__set 1
+#define R_VECT_MASK_SET__dma3__nop 0
+#define R_VECT_MASK_SET__dma2__BITNR 18
+#define R_VECT_MASK_SET__dma2__WIDTH 1
+#define R_VECT_MASK_SET__dma2__set 1
+#define R_VECT_MASK_SET__dma2__nop 0
+#define R_VECT_MASK_SET__dma1__BITNR 17
+#define R_VECT_MASK_SET__dma1__WIDTH 1
+#define R_VECT_MASK_SET__dma1__set 1
+#define R_VECT_MASK_SET__dma1__nop 0
+#define R_VECT_MASK_SET__dma0__BITNR 16
+#define R_VECT_MASK_SET__dma0__WIDTH 1
+#define R_VECT_MASK_SET__dma0__set 1
+#define R_VECT_MASK_SET__dma0__nop 0
+#define R_VECT_MASK_SET__ext_dma1__BITNR 13
+#define R_VECT_MASK_SET__ext_dma1__WIDTH 1
+#define R_VECT_MASK_SET__ext_dma1__set 1
+#define R_VECT_MASK_SET__ext_dma1__nop 0
+#define R_VECT_MASK_SET__ext_dma0__BITNR 12
+#define R_VECT_MASK_SET__ext_dma0__WIDTH 1
+#define R_VECT_MASK_SET__ext_dma0__set 1
+#define R_VECT_MASK_SET__ext_dma0__nop 0
+#define R_VECT_MASK_SET__pa__BITNR 11
+#define R_VECT_MASK_SET__pa__WIDTH 1
+#define R_VECT_MASK_SET__pa__set 1
+#define R_VECT_MASK_SET__pa__nop 0
+#define R_VECT_MASK_SET__irq_intnr__BITNR 10
+#define R_VECT_MASK_SET__irq_intnr__WIDTH 1
+#define R_VECT_MASK_SET__irq_intnr__set 1
+#define R_VECT_MASK_SET__irq_intnr__nop 0
+#define R_VECT_MASK_SET__sw__BITNR 9
+#define R_VECT_MASK_SET__sw__WIDTH 1
+#define R_VECT_MASK_SET__sw__set 1
+#define R_VECT_MASK_SET__sw__nop 0
+#define R_VECT_MASK_SET__serial__BITNR 8
+#define R_VECT_MASK_SET__serial__WIDTH 1
+#define R_VECT_MASK_SET__serial__set 1
+#define R_VECT_MASK_SET__serial__nop 0
+#define R_VECT_MASK_SET__snmp__BITNR 7
+#define R_VECT_MASK_SET__snmp__WIDTH 1
+#define R_VECT_MASK_SET__snmp__set 1
+#define R_VECT_MASK_SET__snmp__nop 0
+#define R_VECT_MASK_SET__network__BITNR 6
+#define R_VECT_MASK_SET__network__WIDTH 1
+#define R_VECT_MASK_SET__network__set 1
+#define R_VECT_MASK_SET__network__nop 0
+#define R_VECT_MASK_SET__scsi1__BITNR 5
+#define R_VECT_MASK_SET__scsi1__WIDTH 1
+#define R_VECT_MASK_SET__scsi1__set 1
+#define R_VECT_MASK_SET__scsi1__nop 0
+#define R_VECT_MASK_SET__par1__BITNR 5
+#define R_VECT_MASK_SET__par1__WIDTH 1
+#define R_VECT_MASK_SET__par1__set 1
+#define R_VECT_MASK_SET__par1__nop 0
+#define R_VECT_MASK_SET__scsi0__BITNR 4
+#define R_VECT_MASK_SET__scsi0__WIDTH 1
+#define R_VECT_MASK_SET__scsi0__set 1
+#define R_VECT_MASK_SET__scsi0__nop 0
+#define R_VECT_MASK_SET__par0__BITNR 4
+#define R_VECT_MASK_SET__par0__WIDTH 1
+#define R_VECT_MASK_SET__par0__set 1
+#define R_VECT_MASK_SET__par0__nop 0
+#define R_VECT_MASK_SET__ata__BITNR 4
+#define R_VECT_MASK_SET__ata__WIDTH 1
+#define R_VECT_MASK_SET__ata__set 1
+#define R_VECT_MASK_SET__ata__nop 0
+#define R_VECT_MASK_SET__mio__BITNR 4
+#define R_VECT_MASK_SET__mio__WIDTH 1
+#define R_VECT_MASK_SET__mio__set 1
+#define R_VECT_MASK_SET__mio__nop 0
+#define R_VECT_MASK_SET__timer1__BITNR 3
+#define R_VECT_MASK_SET__timer1__WIDTH 1
+#define R_VECT_MASK_SET__timer1__set 1
+#define R_VECT_MASK_SET__timer1__nop 0
+#define R_VECT_MASK_SET__timer0__BITNR 2
+#define R_VECT_MASK_SET__timer0__WIDTH 1
+#define R_VECT_MASK_SET__timer0__set 1
+#define R_VECT_MASK_SET__timer0__nop 0
+#define R_VECT_MASK_SET__nmi__BITNR 1
+#define R_VECT_MASK_SET__nmi__WIDTH 1
+#define R_VECT_MASK_SET__nmi__set 1
+#define R_VECT_MASK_SET__nmi__nop 0
+#define R_VECT_MASK_SET__some__BITNR 0
+#define R_VECT_MASK_SET__some__WIDTH 1
+#define R_VECT_MASK_SET__some__set 1
+#define R_VECT_MASK_SET__some__nop 0
+
+/*
+!* DMA registers
+!*/
+
+#define R_SET_EOP (IO_TYPECAST_UDWORD 0xb000003c)
+#define R_SET_EOP__ch9_eop__BITNR 3
+#define R_SET_EOP__ch9_eop__WIDTH 1
+#define R_SET_EOP__ch9_eop__set 1
+#define R_SET_EOP__ch9_eop__nop 0
+#define R_SET_EOP__ch7_eop__BITNR 2
+#define R_SET_EOP__ch7_eop__WIDTH 1
+#define R_SET_EOP__ch7_eop__set 1
+#define R_SET_EOP__ch7_eop__nop 0
+#define R_SET_EOP__ch5_eop__BITNR 1
+#define R_SET_EOP__ch5_eop__WIDTH 1
+#define R_SET_EOP__ch5_eop__set 1
+#define R_SET_EOP__ch5_eop__nop 0
+#define R_SET_EOP__ch3_eop__BITNR 0
+#define R_SET_EOP__ch3_eop__WIDTH 1
+#define R_SET_EOP__ch3_eop__set 1
+#define R_SET_EOP__ch3_eop__nop 0
+
+#define R_DMA_CH0_HWSW (IO_TYPECAST_UDWORD 0xb0000100)
+#define R_DMA_CH0_HWSW__hw__BITNR 16
+#define R_DMA_CH0_HWSW__hw__WIDTH 16
+#define R_DMA_CH0_HWSW__sw__BITNR 0
+#define R_DMA_CH0_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH0_DESCR (IO_TYPECAST_UDWORD 0xb000010c)
+#define R_DMA_CH0_DESCR__descr__BITNR 0
+#define R_DMA_CH0_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH0_NEXT (IO_TYPECAST_UDWORD 0xb0000104)
+#define R_DMA_CH0_NEXT__next__BITNR 0
+#define R_DMA_CH0_NEXT__next__WIDTH 32
+
+#define R_DMA_CH0_BUF (IO_TYPECAST_UDWORD 0xb0000108)
+#define R_DMA_CH0_BUF__buf__BITNR 0
+#define R_DMA_CH0_BUF__buf__WIDTH 32
+
+#define R_DMA_CH0_FIRST (IO_TYPECAST_UDWORD 0xb00001a0)
+#define R_DMA_CH0_FIRST__first__BITNR 0
+#define R_DMA_CH0_FIRST__first__WIDTH 32
+
+#define R_DMA_CH0_CMD (IO_TYPECAST_BYTE 0xb00001d0)
+#define R_DMA_CH0_CMD__cmd__BITNR 0
+#define R_DMA_CH0_CMD__cmd__WIDTH 3
+#define R_DMA_CH0_CMD__cmd__hold 0
+#define R_DMA_CH0_CMD__cmd__start 1
+#define R_DMA_CH0_CMD__cmd__restart 3
+#define R_DMA_CH0_CMD__cmd__continue 3
+#define R_DMA_CH0_CMD__cmd__reset 4
+
+#define R_DMA_CH0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d1)
+#define R_DMA_CH0_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH0_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH0_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH0_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH0_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH0_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH0_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH0_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH0_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d2)
+#define R_DMA_CH0_STATUS__avail__BITNR 0
+#define R_DMA_CH0_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH1_HWSW (IO_TYPECAST_UDWORD 0xb0000110)
+#define R_DMA_CH1_HWSW__hw__BITNR 16
+#define R_DMA_CH1_HWSW__hw__WIDTH 16
+#define R_DMA_CH1_HWSW__sw__BITNR 0
+#define R_DMA_CH1_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH1_DESCR (IO_TYPECAST_UDWORD 0xb000011c)
+#define R_DMA_CH1_DESCR__descr__BITNR 0
+#define R_DMA_CH1_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH1_NEXT (IO_TYPECAST_UDWORD 0xb0000114)
+#define R_DMA_CH1_NEXT__next__BITNR 0
+#define R_DMA_CH1_NEXT__next__WIDTH 32
+
+#define R_DMA_CH1_BUF (IO_TYPECAST_UDWORD 0xb0000118)
+#define R_DMA_CH1_BUF__buf__BITNR 0
+#define R_DMA_CH1_BUF__buf__WIDTH 32
+
+#define R_DMA_CH1_FIRST (IO_TYPECAST_UDWORD 0xb00001a4)
+#define R_DMA_CH1_FIRST__first__BITNR 0
+#define R_DMA_CH1_FIRST__first__WIDTH 32
+
+#define R_DMA_CH1_CMD (IO_TYPECAST_BYTE 0xb00001d4)
+#define R_DMA_CH1_CMD__cmd__BITNR 0
+#define R_DMA_CH1_CMD__cmd__WIDTH 3
+#define R_DMA_CH1_CMD__cmd__hold 0
+#define R_DMA_CH1_CMD__cmd__start 1
+#define R_DMA_CH1_CMD__cmd__restart 3
+#define R_DMA_CH1_CMD__cmd__continue 3
+#define R_DMA_CH1_CMD__cmd__reset 4
+
+#define R_DMA_CH1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d5)
+#define R_DMA_CH1_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH1_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH1_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH1_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH1_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH1_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH1_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH1_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH1_STATUS (IO_TYPECAST_RO_BYTE 0xb00001d6)
+#define R_DMA_CH1_STATUS__avail__BITNR 0
+#define R_DMA_CH1_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH2_HWSW (IO_TYPECAST_UDWORD 0xb0000120)
+#define R_DMA_CH2_HWSW__hw__BITNR 16
+#define R_DMA_CH2_HWSW__hw__WIDTH 16
+#define R_DMA_CH2_HWSW__sw__BITNR 0
+#define R_DMA_CH2_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH2_DESCR (IO_TYPECAST_UDWORD 0xb000012c)
+#define R_DMA_CH2_DESCR__descr__BITNR 0
+#define R_DMA_CH2_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH2_NEXT (IO_TYPECAST_UDWORD 0xb0000124)
+#define R_DMA_CH2_NEXT__next__BITNR 0
+#define R_DMA_CH2_NEXT__next__WIDTH 32
+
+#define R_DMA_CH2_BUF (IO_TYPECAST_UDWORD 0xb0000128)
+#define R_DMA_CH2_BUF__buf__BITNR 0
+#define R_DMA_CH2_BUF__buf__WIDTH 32
+
+#define R_DMA_CH2_FIRST (IO_TYPECAST_UDWORD 0xb00001a8)
+#define R_DMA_CH2_FIRST__first__BITNR 0
+#define R_DMA_CH2_FIRST__first__WIDTH 32
+
+#define R_DMA_CH2_CMD (IO_TYPECAST_BYTE 0xb00001d8)
+#define R_DMA_CH2_CMD__cmd__BITNR 0
+#define R_DMA_CH2_CMD__cmd__WIDTH 3
+#define R_DMA_CH2_CMD__cmd__hold 0
+#define R_DMA_CH2_CMD__cmd__start 1
+#define R_DMA_CH2_CMD__cmd__restart 3
+#define R_DMA_CH2_CMD__cmd__continue 3
+#define R_DMA_CH2_CMD__cmd__reset 4
+
+#define R_DMA_CH2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001d9)
+#define R_DMA_CH2_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH2_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH2_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH2_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH2_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH2_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH2_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH2_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH2_STATUS (IO_TYPECAST_RO_BYTE 0xb00001da)
+#define R_DMA_CH2_STATUS__avail__BITNR 0
+#define R_DMA_CH2_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH3_HWSW (IO_TYPECAST_UDWORD 0xb0000130)
+#define R_DMA_CH3_HWSW__hw__BITNR 16
+#define R_DMA_CH3_HWSW__hw__WIDTH 16
+#define R_DMA_CH3_HWSW__sw__BITNR 0
+#define R_DMA_CH3_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH3_DESCR (IO_TYPECAST_UDWORD 0xb000013c)
+#define R_DMA_CH3_DESCR__descr__BITNR 0
+#define R_DMA_CH3_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH3_NEXT (IO_TYPECAST_UDWORD 0xb0000134)
+#define R_DMA_CH3_NEXT__next__BITNR 0
+#define R_DMA_CH3_NEXT__next__WIDTH 32
+
+#define R_DMA_CH3_BUF (IO_TYPECAST_UDWORD 0xb0000138)
+#define R_DMA_CH3_BUF__buf__BITNR 0
+#define R_DMA_CH3_BUF__buf__WIDTH 32
+
+#define R_DMA_CH3_FIRST (IO_TYPECAST_UDWORD 0xb00001ac)
+#define R_DMA_CH3_FIRST__first__BITNR 0
+#define R_DMA_CH3_FIRST__first__WIDTH 32
+
+#define R_DMA_CH3_CMD (IO_TYPECAST_BYTE 0xb00001dc)
+#define R_DMA_CH3_CMD__cmd__BITNR 0
+#define R_DMA_CH3_CMD__cmd__WIDTH 3
+#define R_DMA_CH3_CMD__cmd__hold 0
+#define R_DMA_CH3_CMD__cmd__start 1
+#define R_DMA_CH3_CMD__cmd__restart 3
+#define R_DMA_CH3_CMD__cmd__continue 3
+#define R_DMA_CH3_CMD__cmd__reset 4
+
+#define R_DMA_CH3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001dd)
+#define R_DMA_CH3_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH3_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH3_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH3_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH3_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH3_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH3_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH3_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH3_STATUS (IO_TYPECAST_RO_BYTE 0xb00001de)
+#define R_DMA_CH3_STATUS__avail__BITNR 0
+#define R_DMA_CH3_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH4_HWSW (IO_TYPECAST_UDWORD 0xb0000140)
+#define R_DMA_CH4_HWSW__hw__BITNR 16
+#define R_DMA_CH4_HWSW__hw__WIDTH 16
+#define R_DMA_CH4_HWSW__sw__BITNR 0
+#define R_DMA_CH4_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH4_DESCR (IO_TYPECAST_UDWORD 0xb000014c)
+#define R_DMA_CH4_DESCR__descr__BITNR 0
+#define R_DMA_CH4_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH4_NEXT (IO_TYPECAST_UDWORD 0xb0000144)
+#define R_DMA_CH4_NEXT__next__BITNR 0
+#define R_DMA_CH4_NEXT__next__WIDTH 32
+
+#define R_DMA_CH4_BUF (IO_TYPECAST_UDWORD 0xb0000148)
+#define R_DMA_CH4_BUF__buf__BITNR 0
+#define R_DMA_CH4_BUF__buf__WIDTH 32
+
+#define R_DMA_CH4_FIRST (IO_TYPECAST_UDWORD 0xb00001b0)
+#define R_DMA_CH4_FIRST__first__BITNR 0
+#define R_DMA_CH4_FIRST__first__WIDTH 32
+
+#define R_DMA_CH4_CMD (IO_TYPECAST_BYTE 0xb00001e0)
+#define R_DMA_CH4_CMD__cmd__BITNR 0
+#define R_DMA_CH4_CMD__cmd__WIDTH 3
+#define R_DMA_CH4_CMD__cmd__hold 0
+#define R_DMA_CH4_CMD__cmd__start 1
+#define R_DMA_CH4_CMD__cmd__restart 3
+#define R_DMA_CH4_CMD__cmd__continue 3
+#define R_DMA_CH4_CMD__cmd__reset 4
+
+#define R_DMA_CH4_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e1)
+#define R_DMA_CH4_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH4_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH4_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH4_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH4_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH4_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH4_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH4_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH4_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e2)
+#define R_DMA_CH4_STATUS__avail__BITNR 0
+#define R_DMA_CH4_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH5_HWSW (IO_TYPECAST_UDWORD 0xb0000150)
+#define R_DMA_CH5_HWSW__hw__BITNR 16
+#define R_DMA_CH5_HWSW__hw__WIDTH 16
+#define R_DMA_CH5_HWSW__sw__BITNR 0
+#define R_DMA_CH5_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH5_DESCR (IO_TYPECAST_UDWORD 0xb000015c)
+#define R_DMA_CH5_DESCR__descr__BITNR 0
+#define R_DMA_CH5_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH5_NEXT (IO_TYPECAST_UDWORD 0xb0000154)
+#define R_DMA_CH5_NEXT__next__BITNR 0
+#define R_DMA_CH5_NEXT__next__WIDTH 32
+
+#define R_DMA_CH5_BUF (IO_TYPECAST_UDWORD 0xb0000158)
+#define R_DMA_CH5_BUF__buf__BITNR 0
+#define R_DMA_CH5_BUF__buf__WIDTH 32
+
+#define R_DMA_CH5_FIRST (IO_TYPECAST_UDWORD 0xb00001b4)
+#define R_DMA_CH5_FIRST__first__BITNR 0
+#define R_DMA_CH5_FIRST__first__WIDTH 32
+
+#define R_DMA_CH5_CMD (IO_TYPECAST_BYTE 0xb00001e4)
+#define R_DMA_CH5_CMD__cmd__BITNR 0
+#define R_DMA_CH5_CMD__cmd__WIDTH 3
+#define R_DMA_CH5_CMD__cmd__hold 0
+#define R_DMA_CH5_CMD__cmd__start 1
+#define R_DMA_CH5_CMD__cmd__restart 3
+#define R_DMA_CH5_CMD__cmd__continue 3
+#define R_DMA_CH5_CMD__cmd__reset 4
+
+#define R_DMA_CH5_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e5)
+#define R_DMA_CH5_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH5_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH5_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH5_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH5_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH5_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH5_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH5_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH5_STATUS (IO_TYPECAST_RO_BYTE 0xb00001e6)
+#define R_DMA_CH5_STATUS__avail__BITNR 0
+#define R_DMA_CH5_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH6_HWSW (IO_TYPECAST_UDWORD 0xb0000160)
+#define R_DMA_CH6_HWSW__hw__BITNR 16
+#define R_DMA_CH6_HWSW__hw__WIDTH 16
+#define R_DMA_CH6_HWSW__sw__BITNR 0
+#define R_DMA_CH6_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH6_DESCR (IO_TYPECAST_UDWORD 0xb000016c)
+#define R_DMA_CH6_DESCR__descr__BITNR 0
+#define R_DMA_CH6_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH6_NEXT (IO_TYPECAST_UDWORD 0xb0000164)
+#define R_DMA_CH6_NEXT__next__BITNR 0
+#define R_DMA_CH6_NEXT__next__WIDTH 32
+
+#define R_DMA_CH6_BUF (IO_TYPECAST_UDWORD 0xb0000168)
+#define R_DMA_CH6_BUF__buf__BITNR 0
+#define R_DMA_CH6_BUF__buf__WIDTH 32
+
+#define R_DMA_CH6_FIRST (IO_TYPECAST_UDWORD 0xb00001b8)
+#define R_DMA_CH6_FIRST__first__BITNR 0
+#define R_DMA_CH6_FIRST__first__WIDTH 32
+
+#define R_DMA_CH6_CMD (IO_TYPECAST_BYTE 0xb00001e8)
+#define R_DMA_CH6_CMD__cmd__BITNR 0
+#define R_DMA_CH6_CMD__cmd__WIDTH 3
+#define R_DMA_CH6_CMD__cmd__hold 0
+#define R_DMA_CH6_CMD__cmd__start 1
+#define R_DMA_CH6_CMD__cmd__restart 3
+#define R_DMA_CH6_CMD__cmd__continue 3
+#define R_DMA_CH6_CMD__cmd__reset 4
+
+#define R_DMA_CH6_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e9)
+#define R_DMA_CH6_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH6_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH6_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH6_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH6_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH6_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH6_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH6_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH6_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ea)
+#define R_DMA_CH6_STATUS__avail__BITNR 0
+#define R_DMA_CH6_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH7_HWSW (IO_TYPECAST_UDWORD 0xb0000170)
+#define R_DMA_CH7_HWSW__hw__BITNR 16
+#define R_DMA_CH7_HWSW__hw__WIDTH 16
+#define R_DMA_CH7_HWSW__sw__BITNR 0
+#define R_DMA_CH7_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH7_DESCR (IO_TYPECAST_UDWORD 0xb000017c)
+#define R_DMA_CH7_DESCR__descr__BITNR 0
+#define R_DMA_CH7_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH7_NEXT (IO_TYPECAST_UDWORD 0xb0000174)
+#define R_DMA_CH7_NEXT__next__BITNR 0
+#define R_DMA_CH7_NEXT__next__WIDTH 32
+
+#define R_DMA_CH7_BUF (IO_TYPECAST_UDWORD 0xb0000178)
+#define R_DMA_CH7_BUF__buf__BITNR 0
+#define R_DMA_CH7_BUF__buf__WIDTH 32
+
+#define R_DMA_CH7_FIRST (IO_TYPECAST_UDWORD 0xb00001bc)
+#define R_DMA_CH7_FIRST__first__BITNR 0
+#define R_DMA_CH7_FIRST__first__WIDTH 32
+
+#define R_DMA_CH7_CMD (IO_TYPECAST_BYTE 0xb00001ec)
+#define R_DMA_CH7_CMD__cmd__BITNR 0
+#define R_DMA_CH7_CMD__cmd__WIDTH 3
+#define R_DMA_CH7_CMD__cmd__hold 0
+#define R_DMA_CH7_CMD__cmd__start 1
+#define R_DMA_CH7_CMD__cmd__restart 3
+#define R_DMA_CH7_CMD__cmd__continue 3
+#define R_DMA_CH7_CMD__cmd__reset 4
+
+#define R_DMA_CH7_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ed)
+#define R_DMA_CH7_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH7_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH7_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH7_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH7_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH7_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH7_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH7_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH7_STATUS (IO_TYPECAST_RO_BYTE 0xb00001ee)
+#define R_DMA_CH7_STATUS__avail__BITNR 0
+#define R_DMA_CH7_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH8_HWSW (IO_TYPECAST_UDWORD 0xb0000180)
+#define R_DMA_CH8_HWSW__hw__BITNR 16
+#define R_DMA_CH8_HWSW__hw__WIDTH 16
+#define R_DMA_CH8_HWSW__sw__BITNR 0
+#define R_DMA_CH8_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH8_DESCR (IO_TYPECAST_UDWORD 0xb000018c)
+#define R_DMA_CH8_DESCR__descr__BITNR 0
+#define R_DMA_CH8_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH8_NEXT (IO_TYPECAST_UDWORD 0xb0000184)
+#define R_DMA_CH8_NEXT__next__BITNR 0
+#define R_DMA_CH8_NEXT__next__WIDTH 32
+
+#define R_DMA_CH8_BUF (IO_TYPECAST_UDWORD 0xb0000188)
+#define R_DMA_CH8_BUF__buf__BITNR 0
+#define R_DMA_CH8_BUF__buf__WIDTH 32
+
+#define R_DMA_CH8_FIRST (IO_TYPECAST_UDWORD 0xb00001c0)
+#define R_DMA_CH8_FIRST__first__BITNR 0
+#define R_DMA_CH8_FIRST__first__WIDTH 32
+
+#define R_DMA_CH8_CMD (IO_TYPECAST_BYTE 0xb00001f0)
+#define R_DMA_CH8_CMD__cmd__BITNR 0
+#define R_DMA_CH8_CMD__cmd__WIDTH 3
+#define R_DMA_CH8_CMD__cmd__hold 0
+#define R_DMA_CH8_CMD__cmd__start 1
+#define R_DMA_CH8_CMD__cmd__restart 3
+#define R_DMA_CH8_CMD__cmd__continue 3
+#define R_DMA_CH8_CMD__cmd__reset 4
+
+#define R_DMA_CH8_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f1)
+#define R_DMA_CH8_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH8_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH8_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH8_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH8_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH8_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH8_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH8_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH8_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f2)
+#define R_DMA_CH8_STATUS__avail__BITNR 0
+#define R_DMA_CH8_STATUS__avail__WIDTH 7
+
+#define R_DMA_CH8_SUB (IO_TYPECAST_UDWORD 0xb000018c)
+#define R_DMA_CH8_SUB__sub__BITNR 0
+#define R_DMA_CH8_SUB__sub__WIDTH 32
+
+#define R_DMA_CH8_NEP (IO_TYPECAST_UDWORD 0xb00001c0)
+#define R_DMA_CH8_NEP__nep__BITNR 0
+#define R_DMA_CH8_NEP__nep__WIDTH 32
+
+#define R_DMA_CH8_SUB0_EP (IO_TYPECAST_UDWORD 0xb00001c8)
+#define R_DMA_CH8_SUB0_EP__ep__BITNR 0
+#define R_DMA_CH8_SUB0_EP__ep__WIDTH 32
+
+#define R_DMA_CH8_SUB0_CMD (IO_TYPECAST_BYTE 0xb00001d3)
+#define R_DMA_CH8_SUB0_CMD__cmd__BITNR 0
+#define R_DMA_CH8_SUB0_CMD__cmd__WIDTH 1
+#define R_DMA_CH8_SUB0_CMD__cmd__stop 0
+#define R_DMA_CH8_SUB0_CMD__cmd__start 1
+
+#define R_DMA_CH8_SUB0_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e3)
+#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__dont 0
+#define R_DMA_CH8_SUB0_CLR_INTR__clr_descr__do 1
+
+#define R_DMA_CH8_SUB1_EP (IO_TYPECAST_UDWORD 0xb00001cc)
+#define R_DMA_CH8_SUB1_EP__ep__BITNR 0
+#define R_DMA_CH8_SUB1_EP__ep__WIDTH 32
+
+#define R_DMA_CH8_SUB1_CMD (IO_TYPECAST_BYTE 0xb00001d7)
+#define R_DMA_CH8_SUB1_CMD__cmd__BITNR 0
+#define R_DMA_CH8_SUB1_CMD__cmd__WIDTH 1
+#define R_DMA_CH8_SUB1_CMD__cmd__stop 0
+#define R_DMA_CH8_SUB1_CMD__cmd__start 1
+
+#define R_DMA_CH8_SUB1_CLR_INTR (IO_TYPECAST_BYTE 0xb00001e7)
+#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__dont 0
+#define R_DMA_CH8_SUB1_CLR_INTR__clr_descr__do 1
+
+#define R_DMA_CH8_SUB2_EP (IO_TYPECAST_UDWORD 0xb00001f8)
+#define R_DMA_CH8_SUB2_EP__ep__BITNR 0
+#define R_DMA_CH8_SUB2_EP__ep__WIDTH 32
+
+#define R_DMA_CH8_SUB2_CMD (IO_TYPECAST_BYTE 0xb00001db)
+#define R_DMA_CH8_SUB2_CMD__cmd__BITNR 0
+#define R_DMA_CH8_SUB2_CMD__cmd__WIDTH 1
+#define R_DMA_CH8_SUB2_CMD__cmd__stop 0
+#define R_DMA_CH8_SUB2_CMD__cmd__start 1
+
+#define R_DMA_CH8_SUB2_CLR_INTR (IO_TYPECAST_BYTE 0xb00001eb)
+#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__dont 0
+#define R_DMA_CH8_SUB2_CLR_INTR__clr_descr__do 1
+
+#define R_DMA_CH8_SUB3_EP (IO_TYPECAST_UDWORD 0xb00001fc)
+#define R_DMA_CH8_SUB3_EP__ep__BITNR 0
+#define R_DMA_CH8_SUB3_EP__ep__WIDTH 32
+
+#define R_DMA_CH8_SUB3_CMD (IO_TYPECAST_BYTE 0xb00001df)
+#define R_DMA_CH8_SUB3_CMD__cmd__BITNR 0
+#define R_DMA_CH8_SUB3_CMD__cmd__WIDTH 1
+#define R_DMA_CH8_SUB3_CMD__cmd__stop 0
+#define R_DMA_CH8_SUB3_CMD__cmd__start 1
+
+#define R_DMA_CH8_SUB3_CLR_INTR (IO_TYPECAST_BYTE 0xb00001ef)
+#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__dont 0
+#define R_DMA_CH8_SUB3_CLR_INTR__clr_descr__do 1
+
+#define R_DMA_CH9_HWSW (IO_TYPECAST_UDWORD 0xb0000190)
+#define R_DMA_CH9_HWSW__hw__BITNR 16
+#define R_DMA_CH9_HWSW__hw__WIDTH 16
+#define R_DMA_CH9_HWSW__sw__BITNR 0
+#define R_DMA_CH9_HWSW__sw__WIDTH 16
+
+#define R_DMA_CH9_DESCR (IO_TYPECAST_UDWORD 0xb000019c)
+#define R_DMA_CH9_DESCR__descr__BITNR 0
+#define R_DMA_CH9_DESCR__descr__WIDTH 32
+
+#define R_DMA_CH9_NEXT (IO_TYPECAST_UDWORD 0xb0000194)
+#define R_DMA_CH9_NEXT__next__BITNR 0
+#define R_DMA_CH9_NEXT__next__WIDTH 32
+
+#define R_DMA_CH9_BUF (IO_TYPECAST_UDWORD 0xb0000198)
+#define R_DMA_CH9_BUF__buf__BITNR 0
+#define R_DMA_CH9_BUF__buf__WIDTH 32
+
+#define R_DMA_CH9_FIRST (IO_TYPECAST_UDWORD 0xb00001c4)
+#define R_DMA_CH9_FIRST__first__BITNR 0
+#define R_DMA_CH9_FIRST__first__WIDTH 32
+
+#define R_DMA_CH9_CMD (IO_TYPECAST_BYTE 0xb00001f4)
+#define R_DMA_CH9_CMD__cmd__BITNR 0
+#define R_DMA_CH9_CMD__cmd__WIDTH 3
+#define R_DMA_CH9_CMD__cmd__hold 0
+#define R_DMA_CH9_CMD__cmd__start 1
+#define R_DMA_CH9_CMD__cmd__restart 3
+#define R_DMA_CH9_CMD__cmd__continue 3
+#define R_DMA_CH9_CMD__cmd__reset 4
+
+#define R_DMA_CH9_CLR_INTR (IO_TYPECAST_BYTE 0xb00001f5)
+#define R_DMA_CH9_CLR_INTR__clr_eop__BITNR 1
+#define R_DMA_CH9_CLR_INTR__clr_eop__WIDTH 1
+#define R_DMA_CH9_CLR_INTR__clr_eop__do 1
+#define R_DMA_CH9_CLR_INTR__clr_eop__dont 0
+#define R_DMA_CH9_CLR_INTR__clr_descr__BITNR 0
+#define R_DMA_CH9_CLR_INTR__clr_descr__WIDTH 1
+#define R_DMA_CH9_CLR_INTR__clr_descr__do 1
+#define R_DMA_CH9_CLR_INTR__clr_descr__dont 0
+
+#define R_DMA_CH9_STATUS (IO_TYPECAST_RO_BYTE 0xb00001f6)
+#define R_DMA_CH9_STATUS__avail__BITNR 0
+#define R_DMA_CH9_STATUS__avail__WIDTH 7
+
+/*
+!* Test mode registers
+!*/
+
+#define R_TEST_MODE (IO_TYPECAST_UDWORD 0xb00000fc)
+#define R_TEST_MODE__single_step__BITNR 19
+#define R_TEST_MODE__single_step__WIDTH 1
+#define R_TEST_MODE__single_step__on 1
+#define R_TEST_MODE__single_step__off 0
+#define R_TEST_MODE__step_wr__BITNR 18
+#define R_TEST_MODE__step_wr__WIDTH 1
+#define R_TEST_MODE__step_wr__on 1
+#define R_TEST_MODE__step_wr__off 0
+#define R_TEST_MODE__step_rd__BITNR 17
+#define R_TEST_MODE__step_rd__WIDTH 1
+#define R_TEST_MODE__step_rd__on 1
+#define R_TEST_MODE__step_rd__off 0
+#define R_TEST_MODE__step_fetch__BITNR 16
+#define R_TEST_MODE__step_fetch__WIDTH 1
+#define R_TEST_MODE__step_fetch__on 1
+#define R_TEST_MODE__step_fetch__off 0
+#define R_TEST_MODE__mmu_test__BITNR 12
+#define R_TEST_MODE__mmu_test__WIDTH 1
+#define R_TEST_MODE__mmu_test__on 1
+#define R_TEST_MODE__mmu_test__off 0
+#define R_TEST_MODE__usb_test__BITNR 11
+#define R_TEST_MODE__usb_test__WIDTH 1
+#define R_TEST_MODE__usb_test__on 1
+#define R_TEST_MODE__usb_test__off 0
+#define R_TEST_MODE__scsi_timer_test__BITNR 10
+#define R_TEST_MODE__scsi_timer_test__WIDTH 1
+#define R_TEST_MODE__scsi_timer_test__on 1
+#define R_TEST_MODE__scsi_timer_test__off 0
+#define R_TEST_MODE__backoff__BITNR 9
+#define R_TEST_MODE__backoff__WIDTH 1
+#define R_TEST_MODE__backoff__on 1
+#define R_TEST_MODE__backoff__off 0
+#define R_TEST_MODE__snmp_test__BITNR 8
+#define R_TEST_MODE__snmp_test__WIDTH 1
+#define R_TEST_MODE__snmp_test__on 1
+#define R_TEST_MODE__snmp_test__off 0
+#define R_TEST_MODE__snmp_inc__BITNR 7
+#define R_TEST_MODE__snmp_inc__WIDTH 1
+#define R_TEST_MODE__snmp_inc__do 1
+#define R_TEST_MODE__snmp_inc__dont 0
+#define R_TEST_MODE__ser_loop__BITNR 6
+#define R_TEST_MODE__ser_loop__WIDTH 1
+#define R_TEST_MODE__ser_loop__on 1
+#define R_TEST_MODE__ser_loop__off 0
+#define R_TEST_MODE__baudrate__BITNR 5
+#define R_TEST_MODE__baudrate__WIDTH 1
+#define R_TEST_MODE__baudrate__on 1
+#define R_TEST_MODE__baudrate__off 0
+#define R_TEST_MODE__timer__BITNR 3
+#define R_TEST_MODE__timer__WIDTH 2
+#define R_TEST_MODE__timer__off 0
+#define R_TEST_MODE__timer__even 1
+#define R_TEST_MODE__timer__odd 2
+#define R_TEST_MODE__timer__all 3
+#define R_TEST_MODE__cache_test__BITNR 2
+#define R_TEST_MODE__cache_test__WIDTH 1
+#define R_TEST_MODE__cache_test__normal 0
+#define R_TEST_MODE__cache_test__test 1
+#define R_TEST_MODE__tag_test__BITNR 1
+#define R_TEST_MODE__tag_test__WIDTH 1
+#define R_TEST_MODE__tag_test__normal 0
+#define R_TEST_MODE__tag_test__test 1
+#define R_TEST_MODE__cache_enable__BITNR 0
+#define R_TEST_MODE__cache_enable__WIDTH 1
+#define R_TEST_MODE__cache_enable__enable 1
+#define R_TEST_MODE__cache_enable__disable 0
+
+#define R_SINGLE_STEP (IO_TYPECAST_BYTE 0xb00000fe)
+#define R_SINGLE_STEP__single_step__BITNR 3
+#define R_SINGLE_STEP__single_step__WIDTH 1
+#define R_SINGLE_STEP__single_step__on 1
+#define R_SINGLE_STEP__single_step__off 0
+#define R_SINGLE_STEP__step_wr__BITNR 2
+#define R_SINGLE_STEP__step_wr__WIDTH 1
+#define R_SINGLE_STEP__step_wr__on 1
+#define R_SINGLE_STEP__step_wr__off 0
+#define R_SINGLE_STEP__step_rd__BITNR 1
+#define R_SINGLE_STEP__step_rd__WIDTH 1
+#define R_SINGLE_STEP__step_rd__on 1
+#define R_SINGLE_STEP__step_rd__off 0
+#define R_SINGLE_STEP__step_fetch__BITNR 0
+#define R_SINGLE_STEP__step_fetch__WIDTH 1
+#define R_SINGLE_STEP__step_fetch__on 1
+#define R_SINGLE_STEP__step_fetch__off 0
+
+/*
+!* USB interface control registers
+!*/
+
+#define R_USB_REVISION (IO_TYPECAST_RO_BYTE 0xb0000200)
+#define R_USB_REVISION__major__BITNR 4
+#define R_USB_REVISION__major__WIDTH 4
+#define R_USB_REVISION__minor__BITNR 0
+#define R_USB_REVISION__minor__WIDTH 4
+
+#define R_USB_COMMAND (IO_TYPECAST_BYTE 0xb0000201)
+#define R_USB_COMMAND__port_sel__BITNR 6
+#define R_USB_COMMAND__port_sel__WIDTH 2
+#define R_USB_COMMAND__port_sel__nop 0
+#define R_USB_COMMAND__port_sel__port1 1
+#define R_USB_COMMAND__port_sel__port2 2
+#define R_USB_COMMAND__port_sel__both 3
+#define R_USB_COMMAND__port_cmd__BITNR 4
+#define R_USB_COMMAND__port_cmd__WIDTH 2
+#define R_USB_COMMAND__port_cmd__reset 0
+#define R_USB_COMMAND__port_cmd__disable 1
+#define R_USB_COMMAND__port_cmd__suspend 2
+#define R_USB_COMMAND__port_cmd__resume 3
+#define R_USB_COMMAND__busy__BITNR 3
+#define R_USB_COMMAND__busy__WIDTH 1
+#define R_USB_COMMAND__busy__no 0
+#define R_USB_COMMAND__busy__yes 1
+#define R_USB_COMMAND__ctrl_cmd__BITNR 0
+#define R_USB_COMMAND__ctrl_cmd__WIDTH 3
+#define R_USB_COMMAND__ctrl_cmd__nop 0
+#define R_USB_COMMAND__ctrl_cmd__reset 1
+#define R_USB_COMMAND__ctrl_cmd__deconfig 2
+#define R_USB_COMMAND__ctrl_cmd__host_config 3
+#define R_USB_COMMAND__ctrl_cmd__dev_config 4
+#define R_USB_COMMAND__ctrl_cmd__host_nop 5
+#define R_USB_COMMAND__ctrl_cmd__host_run 6
+#define R_USB_COMMAND__ctrl_cmd__host_stop 7
+
+#define R_USB_COMMAND_DEV (IO_TYPECAST_BYTE 0xb0000201)
+#define R_USB_COMMAND_DEV__port_sel__BITNR 6
+#define R_USB_COMMAND_DEV__port_sel__WIDTH 2
+#define R_USB_COMMAND_DEV__port_sel__nop 0
+#define R_USB_COMMAND_DEV__port_sel__dummy1 1
+#define R_USB_COMMAND_DEV__port_sel__dummy2 2
+#define R_USB_COMMAND_DEV__port_sel__any 3
+#define R_USB_COMMAND_DEV__port_cmd__BITNR 4
+#define R_USB_COMMAND_DEV__port_cmd__WIDTH 2
+#define R_USB_COMMAND_DEV__port_cmd__active 0
+#define R_USB_COMMAND_DEV__port_cmd__passive 1
+#define R_USB_COMMAND_DEV__port_cmd__nop 2
+#define R_USB_COMMAND_DEV__port_cmd__wakeup 3
+#define R_USB_COMMAND_DEV__busy__BITNR 3
+#define R_USB_COMMAND_DEV__busy__WIDTH 1
+#define R_USB_COMMAND_DEV__busy__no 0
+#define R_USB_COMMAND_DEV__busy__yes 1
+#define R_USB_COMMAND_DEV__ctrl_cmd__BITNR 0
+#define R_USB_COMMAND_DEV__ctrl_cmd__WIDTH 3
+#define R_USB_COMMAND_DEV__ctrl_cmd__nop 0
+#define R_USB_COMMAND_DEV__ctrl_cmd__reset 1
+#define R_USB_COMMAND_DEV__ctrl_cmd__deconfig 2
+#define R_USB_COMMAND_DEV__ctrl_cmd__host_config 3
+#define R_USB_COMMAND_DEV__ctrl_cmd__dev_config 4
+#define R_USB_COMMAND_DEV__ctrl_cmd__dev_active 5
+#define R_USB_COMMAND_DEV__ctrl_cmd__dev_passive 6
+#define R_USB_COMMAND_DEV__ctrl_cmd__dev_nop 7
+
+#define R_USB_STATUS (IO_TYPECAST_RO_BYTE 0xb0000202)
+#define R_USB_STATUS__ourun__BITNR 5
+#define R_USB_STATUS__ourun__WIDTH 1
+#define R_USB_STATUS__ourun__no 0
+#define R_USB_STATUS__ourun__yes 1
+#define R_USB_STATUS__perror__BITNR 4
+#define R_USB_STATUS__perror__WIDTH 1
+#define R_USB_STATUS__perror__no 0
+#define R_USB_STATUS__perror__yes 1
+#define R_USB_STATUS__device_mode__BITNR 3
+#define R_USB_STATUS__device_mode__WIDTH 1
+#define R_USB_STATUS__device_mode__no 0
+#define R_USB_STATUS__device_mode__yes 1
+#define R_USB_STATUS__host_mode__BITNR 2
+#define R_USB_STATUS__host_mode__WIDTH 1
+#define R_USB_STATUS__host_mode__no 0
+#define R_USB_STATUS__host_mode__yes 1
+#define R_USB_STATUS__started__BITNR 1
+#define R_USB_STATUS__started__WIDTH 1
+#define R_USB_STATUS__started__no 0
+#define R_USB_STATUS__started__yes 1
+#define R_USB_STATUS__running__BITNR 0
+#define R_USB_STATUS__running__WIDTH 1
+#define R_USB_STATUS__running__no 0
+#define R_USB_STATUS__running__yes 1
+
+#define R_USB_IRQ_MASK_SET (IO_TYPECAST_UWORD 0xb0000204)
+#define R_USB_IRQ_MASK_SET__iso_eof__BITNR 13
+#define R_USB_IRQ_MASK_SET__iso_eof__WIDTH 1
+#define R_USB_IRQ_MASK_SET__iso_eof__nop 0
+#define R_USB_IRQ_MASK_SET__iso_eof__set 1
+#define R_USB_IRQ_MASK_SET__intr_eof__BITNR 12
+#define R_USB_IRQ_MASK_SET__intr_eof__WIDTH 1
+#define R_USB_IRQ_MASK_SET__intr_eof__nop 0
+#define R_USB_IRQ_MASK_SET__intr_eof__set 1
+#define R_USB_IRQ_MASK_SET__iso_eot__BITNR 11
+#define R_USB_IRQ_MASK_SET__iso_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET__iso_eot__nop 0
+#define R_USB_IRQ_MASK_SET__iso_eot__set 1
+#define R_USB_IRQ_MASK_SET__intr_eot__BITNR 10
+#define R_USB_IRQ_MASK_SET__intr_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET__intr_eot__nop 0
+#define R_USB_IRQ_MASK_SET__intr_eot__set 1
+#define R_USB_IRQ_MASK_SET__ctl_eot__BITNR 9
+#define R_USB_IRQ_MASK_SET__ctl_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET__ctl_eot__nop 0
+#define R_USB_IRQ_MASK_SET__ctl_eot__set 1
+#define R_USB_IRQ_MASK_SET__bulk_eot__BITNR 8
+#define R_USB_IRQ_MASK_SET__bulk_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET__bulk_eot__nop 0
+#define R_USB_IRQ_MASK_SET__bulk_eot__set 1
+#define R_USB_IRQ_MASK_SET__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_SET__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_SET__epid_attn__nop 0
+#define R_USB_IRQ_MASK_SET__epid_attn__set 1
+#define R_USB_IRQ_MASK_SET__sof__BITNR 2
+#define R_USB_IRQ_MASK_SET__sof__WIDTH 1
+#define R_USB_IRQ_MASK_SET__sof__nop 0
+#define R_USB_IRQ_MASK_SET__sof__set 1
+#define R_USB_IRQ_MASK_SET__port_status__BITNR 1
+#define R_USB_IRQ_MASK_SET__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_SET__port_status__nop 0
+#define R_USB_IRQ_MASK_SET__port_status__set 1
+#define R_USB_IRQ_MASK_SET__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_SET__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_SET__ctl_status__nop 0
+#define R_USB_IRQ_MASK_SET__ctl_status__set 1
+
+#define R_USB_IRQ_MASK_READ (IO_TYPECAST_RO_UWORD 0xb0000204)
+#define R_USB_IRQ_MASK_READ__iso_eof__BITNR 13
+#define R_USB_IRQ_MASK_READ__iso_eof__WIDTH 1
+#define R_USB_IRQ_MASK_READ__iso_eof__no_pend 0
+#define R_USB_IRQ_MASK_READ__iso_eof__pend 1
+#define R_USB_IRQ_MASK_READ__intr_eof__BITNR 12
+#define R_USB_IRQ_MASK_READ__intr_eof__WIDTH 1
+#define R_USB_IRQ_MASK_READ__intr_eof__no_pend 0
+#define R_USB_IRQ_MASK_READ__intr_eof__pend 1
+#define R_USB_IRQ_MASK_READ__iso_eot__BITNR 11
+#define R_USB_IRQ_MASK_READ__iso_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ__iso_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ__iso_eot__pend 1
+#define R_USB_IRQ_MASK_READ__intr_eot__BITNR 10
+#define R_USB_IRQ_MASK_READ__intr_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ__intr_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ__intr_eot__pend 1
+#define R_USB_IRQ_MASK_READ__ctl_eot__BITNR 9
+#define R_USB_IRQ_MASK_READ__ctl_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ__ctl_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ__ctl_eot__pend 1
+#define R_USB_IRQ_MASK_READ__bulk_eot__BITNR 8
+#define R_USB_IRQ_MASK_READ__bulk_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ__bulk_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ__bulk_eot__pend 1
+#define R_USB_IRQ_MASK_READ__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_READ__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_READ__epid_attn__no_pend 0
+#define R_USB_IRQ_MASK_READ__epid_attn__pend 1
+#define R_USB_IRQ_MASK_READ__sof__BITNR 2
+#define R_USB_IRQ_MASK_READ__sof__WIDTH 1
+#define R_USB_IRQ_MASK_READ__sof__no_pend 0
+#define R_USB_IRQ_MASK_READ__sof__pend 1
+#define R_USB_IRQ_MASK_READ__port_status__BITNR 1
+#define R_USB_IRQ_MASK_READ__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_READ__port_status__no_pend 0
+#define R_USB_IRQ_MASK_READ__port_status__pend 1
+#define R_USB_IRQ_MASK_READ__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_READ__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_READ__ctl_status__no_pend 0
+#define R_USB_IRQ_MASK_READ__ctl_status__pend 1
+
+#define R_USB_IRQ_MASK_CLR (IO_TYPECAST_UWORD 0xb0000206)
+#define R_USB_IRQ_MASK_CLR__iso_eof__BITNR 13
+#define R_USB_IRQ_MASK_CLR__iso_eof__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__iso_eof__nop 0
+#define R_USB_IRQ_MASK_CLR__iso_eof__clr 1
+#define R_USB_IRQ_MASK_CLR__intr_eof__BITNR 12
+#define R_USB_IRQ_MASK_CLR__intr_eof__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__intr_eof__nop 0
+#define R_USB_IRQ_MASK_CLR__intr_eof__clr 1
+#define R_USB_IRQ_MASK_CLR__iso_eot__BITNR 11
+#define R_USB_IRQ_MASK_CLR__iso_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__iso_eot__nop 0
+#define R_USB_IRQ_MASK_CLR__iso_eot__clr 1
+#define R_USB_IRQ_MASK_CLR__intr_eot__BITNR 10
+#define R_USB_IRQ_MASK_CLR__intr_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__intr_eot__nop 0
+#define R_USB_IRQ_MASK_CLR__intr_eot__clr 1
+#define R_USB_IRQ_MASK_CLR__ctl_eot__BITNR 9
+#define R_USB_IRQ_MASK_CLR__ctl_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__ctl_eot__nop 0
+#define R_USB_IRQ_MASK_CLR__ctl_eot__clr 1
+#define R_USB_IRQ_MASK_CLR__bulk_eot__BITNR 8
+#define R_USB_IRQ_MASK_CLR__bulk_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__bulk_eot__nop 0
+#define R_USB_IRQ_MASK_CLR__bulk_eot__clr 1
+#define R_USB_IRQ_MASK_CLR__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_CLR__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__epid_attn__nop 0
+#define R_USB_IRQ_MASK_CLR__epid_attn__clr 1
+#define R_USB_IRQ_MASK_CLR__sof__BITNR 2
+#define R_USB_IRQ_MASK_CLR__sof__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__sof__nop 0
+#define R_USB_IRQ_MASK_CLR__sof__clr 1
+#define R_USB_IRQ_MASK_CLR__port_status__BITNR 1
+#define R_USB_IRQ_MASK_CLR__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__port_status__nop 0
+#define R_USB_IRQ_MASK_CLR__port_status__clr 1
+#define R_USB_IRQ_MASK_CLR__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_CLR__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_CLR__ctl_status__nop 0
+#define R_USB_IRQ_MASK_CLR__ctl_status__clr 1
+
+#define R_USB_IRQ_READ (IO_TYPECAST_RO_UWORD 0xb0000206)
+#define R_USB_IRQ_READ__iso_eof__BITNR 13
+#define R_USB_IRQ_READ__iso_eof__WIDTH 1
+#define R_USB_IRQ_READ__iso_eof__no_pend 0
+#define R_USB_IRQ_READ__iso_eof__pend 1
+#define R_USB_IRQ_READ__intr_eof__BITNR 12
+#define R_USB_IRQ_READ__intr_eof__WIDTH 1
+#define R_USB_IRQ_READ__intr_eof__no_pend 0
+#define R_USB_IRQ_READ__intr_eof__pend 1
+#define R_USB_IRQ_READ__iso_eot__BITNR 11
+#define R_USB_IRQ_READ__iso_eot__WIDTH 1
+#define R_USB_IRQ_READ__iso_eot__no_pend 0
+#define R_USB_IRQ_READ__iso_eot__pend 1
+#define R_USB_IRQ_READ__intr_eot__BITNR 10
+#define R_USB_IRQ_READ__intr_eot__WIDTH 1
+#define R_USB_IRQ_READ__intr_eot__no_pend 0
+#define R_USB_IRQ_READ__intr_eot__pend 1
+#define R_USB_IRQ_READ__ctl_eot__BITNR 9
+#define R_USB_IRQ_READ__ctl_eot__WIDTH 1
+#define R_USB_IRQ_READ__ctl_eot__no_pend 0
+#define R_USB_IRQ_READ__ctl_eot__pend 1
+#define R_USB_IRQ_READ__bulk_eot__BITNR 8
+#define R_USB_IRQ_READ__bulk_eot__WIDTH 1
+#define R_USB_IRQ_READ__bulk_eot__no_pend 0
+#define R_USB_IRQ_READ__bulk_eot__pend 1
+#define R_USB_IRQ_READ__epid_attn__BITNR 3
+#define R_USB_IRQ_READ__epid_attn__WIDTH 1
+#define R_USB_IRQ_READ__epid_attn__no_pend 0
+#define R_USB_IRQ_READ__epid_attn__pend 1
+#define R_USB_IRQ_READ__sof__BITNR 2
+#define R_USB_IRQ_READ__sof__WIDTH 1
+#define R_USB_IRQ_READ__sof__no_pend 0
+#define R_USB_IRQ_READ__sof__pend 1
+#define R_USB_IRQ_READ__port_status__BITNR 1
+#define R_USB_IRQ_READ__port_status__WIDTH 1
+#define R_USB_IRQ_READ__port_status__no_pend 0
+#define R_USB_IRQ_READ__port_status__pend 1
+#define R_USB_IRQ_READ__ctl_status__BITNR 0
+#define R_USB_IRQ_READ__ctl_status__WIDTH 1
+#define R_USB_IRQ_READ__ctl_status__no_pend 0
+#define R_USB_IRQ_READ__ctl_status__pend 1
+
+#define R_USB_IRQ_MASK_SET_DEV (IO_TYPECAST_UWORD 0xb0000204)
+#define R_USB_IRQ_MASK_SET_DEV__out_eot__BITNR 12
+#define R_USB_IRQ_MASK_SET_DEV__out_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__out_eot__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__out_eot__set 1
+#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__BITNR 11
+#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__set 1
+#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__BITNR 10
+#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__set 1
+#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__BITNR 9
+#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__set 1
+#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__BITNR 8
+#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__set 1
+#define R_USB_IRQ_MASK_SET_DEV__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_SET_DEV__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__epid_attn__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__epid_attn__set 1
+#define R_USB_IRQ_MASK_SET_DEV__sof__BITNR 2
+#define R_USB_IRQ_MASK_SET_DEV__sof__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__sof__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__sof__set 1
+#define R_USB_IRQ_MASK_SET_DEV__port_status__BITNR 1
+#define R_USB_IRQ_MASK_SET_DEV__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__port_status__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__port_status__set 1
+#define R_USB_IRQ_MASK_SET_DEV__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_SET_DEV__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_SET_DEV__ctl_status__nop 0
+#define R_USB_IRQ_MASK_SET_DEV__ctl_status__set 1
+
+#define R_USB_IRQ_MASK_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000204)
+#define R_USB_IRQ_MASK_READ_DEV__out_eot__BITNR 12
+#define R_USB_IRQ_MASK_READ_DEV__out_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__out_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__out_eot__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__BITNR 11
+#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__BITNR 10
+#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__BITNR 9
+#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__BITNR 8
+#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_READ_DEV__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__epid_attn__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__epid_attn__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__sof__BITNR 2
+#define R_USB_IRQ_MASK_READ_DEV__sof__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__sof__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__sof__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__port_status__BITNR 1
+#define R_USB_IRQ_MASK_READ_DEV__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__port_status__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__port_status__pend 1
+#define R_USB_IRQ_MASK_READ_DEV__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_READ_DEV__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_READ_DEV__ctl_status__no_pend 0
+#define R_USB_IRQ_MASK_READ_DEV__ctl_status__pend 1
+
+#define R_USB_IRQ_MASK_CLR_DEV (IO_TYPECAST_UWORD 0xb0000206)
+#define R_USB_IRQ_MASK_CLR_DEV__out_eot__BITNR 12
+#define R_USB_IRQ_MASK_CLR_DEV__out_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__out_eot__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__out_eot__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__BITNR 11
+#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__BITNR 10
+#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__BITNR 9
+#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__BITNR 8
+#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__BITNR 3
+#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__epid_attn__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__sof__BITNR 2
+#define R_USB_IRQ_MASK_CLR_DEV__sof__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__sof__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__sof__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__port_status__BITNR 1
+#define R_USB_IRQ_MASK_CLR_DEV__port_status__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__port_status__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__port_status__clr 1
+#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__BITNR 0
+#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__WIDTH 1
+#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__nop 0
+#define R_USB_IRQ_MASK_CLR_DEV__ctl_status__clr 1
+
+#define R_USB_IRQ_READ_DEV (IO_TYPECAST_RO_UWORD 0xb0000206)
+#define R_USB_IRQ_READ_DEV__out_eot__BITNR 12
+#define R_USB_IRQ_READ_DEV__out_eot__WIDTH 1
+#define R_USB_IRQ_READ_DEV__out_eot__no_pend 0
+#define R_USB_IRQ_READ_DEV__out_eot__pend 1
+#define R_USB_IRQ_READ_DEV__ep3_in_eot__BITNR 11
+#define R_USB_IRQ_READ_DEV__ep3_in_eot__WIDTH 1
+#define R_USB_IRQ_READ_DEV__ep3_in_eot__no_pend 0
+#define R_USB_IRQ_READ_DEV__ep3_in_eot__pend 1
+#define R_USB_IRQ_READ_DEV__ep2_in_eot__BITNR 10
+#define R_USB_IRQ_READ_DEV__ep2_in_eot__WIDTH 1
+#define R_USB_IRQ_READ_DEV__ep2_in_eot__no_pend 0
+#define R_USB_IRQ_READ_DEV__ep2_in_eot__pend 1
+#define R_USB_IRQ_READ_DEV__ep1_in_eot__BITNR 9
+#define R_USB_IRQ_READ_DEV__ep1_in_eot__WIDTH 1
+#define R_USB_IRQ_READ_DEV__ep1_in_eot__no_pend 0
+#define R_USB_IRQ_READ_DEV__ep1_in_eot__pend 1
+#define R_USB_IRQ_READ_DEV__ep0_in_eot__BITNR 8
+#define R_USB_IRQ_READ_DEV__ep0_in_eot__WIDTH 1
+#define R_USB_IRQ_READ_DEV__ep0_in_eot__no_pend 0
+#define R_USB_IRQ_READ_DEV__ep0_in_eot__pend 1
+#define R_USB_IRQ_READ_DEV__epid_attn__BITNR 3
+#define R_USB_IRQ_READ_DEV__epid_attn__WIDTH 1
+#define R_USB_IRQ_READ_DEV__epid_attn__no_pend 0
+#define R_USB_IRQ_READ_DEV__epid_attn__pend 1
+#define R_USB_IRQ_READ_DEV__sof__BITNR 2
+#define R_USB_IRQ_READ_DEV__sof__WIDTH 1
+#define R_USB_IRQ_READ_DEV__sof__no_pend 0
+#define R_USB_IRQ_READ_DEV__sof__pend 1
+#define R_USB_IRQ_READ_DEV__port_status__BITNR 1
+#define R_USB_IRQ_READ_DEV__port_status__WIDTH 1
+#define R_USB_IRQ_READ_DEV__port_status__no_pend 0
+#define R_USB_IRQ_READ_DEV__port_status__pend 1
+#define R_USB_IRQ_READ_DEV__ctl_status__BITNR 0
+#define R_USB_IRQ_READ_DEV__ctl_status__WIDTH 1
+#define R_USB_IRQ_READ_DEV__ctl_status__no_pend 0
+#define R_USB_IRQ_READ_DEV__ctl_status__pend 1
+
+#define R_USB_FM_NUMBER (IO_TYPECAST_UDWORD 0xb000020c)
+#define R_USB_FM_NUMBER__value__BITNR 0
+#define R_USB_FM_NUMBER__value__WIDTH 32
+
+#define R_USB_FM_INTERVAL (IO_TYPECAST_UWORD 0xb0000210)
+#define R_USB_FM_INTERVAL__fixed__BITNR 6
+#define R_USB_FM_INTERVAL__fixed__WIDTH 8
+#define R_USB_FM_INTERVAL__adj__BITNR 0
+#define R_USB_FM_INTERVAL__adj__WIDTH 6
+
+#define R_USB_FM_REMAINING (IO_TYPECAST_RO_UWORD 0xb0000212)
+#define R_USB_FM_REMAINING__value__BITNR 0
+#define R_USB_FM_REMAINING__value__WIDTH 14
+
+#define R_USB_FM_PSTART (IO_TYPECAST_UWORD 0xb0000214)
+#define R_USB_FM_PSTART__value__BITNR 0
+#define R_USB_FM_PSTART__value__WIDTH 14
+
+#define R_USB_RH_STATUS (IO_TYPECAST_RO_BYTE 0xb0000203)
+#define R_USB_RH_STATUS__babble2__BITNR 7
+#define R_USB_RH_STATUS__babble2__WIDTH 1
+#define R_USB_RH_STATUS__babble2__no 0
+#define R_USB_RH_STATUS__babble2__yes 1
+#define R_USB_RH_STATUS__babble1__BITNR 6
+#define R_USB_RH_STATUS__babble1__WIDTH 1
+#define R_USB_RH_STATUS__babble1__no 0
+#define R_USB_RH_STATUS__babble1__yes 1
+#define R_USB_RH_STATUS__bus1__BITNR 4
+#define R_USB_RH_STATUS__bus1__WIDTH 2
+#define R_USB_RH_STATUS__bus1__SE0 0
+#define R_USB_RH_STATUS__bus1__Diff0 1
+#define R_USB_RH_STATUS__bus1__Diff1 2
+#define R_USB_RH_STATUS__bus1__SE1 3
+#define R_USB_RH_STATUS__bus2__BITNR 2
+#define R_USB_RH_STATUS__bus2__WIDTH 2
+#define R_USB_RH_STATUS__bus2__SE0 0
+#define R_USB_RH_STATUS__bus2__Diff0 1
+#define R_USB_RH_STATUS__bus2__Diff1 2
+#define R_USB_RH_STATUS__bus2__SE1 3
+#define R_USB_RH_STATUS__nports__BITNR 0
+#define R_USB_RH_STATUS__nports__WIDTH 2
+
+#define R_USB_RH_PORT_STATUS_1 (IO_TYPECAST_RO_UWORD 0xb0000218)
+#define R_USB_RH_PORT_STATUS_1__speed__BITNR 9
+#define R_USB_RH_PORT_STATUS_1__speed__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__speed__full 0
+#define R_USB_RH_PORT_STATUS_1__speed__low 1
+#define R_USB_RH_PORT_STATUS_1__power__BITNR 8
+#define R_USB_RH_PORT_STATUS_1__power__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__reset__BITNR 4
+#define R_USB_RH_PORT_STATUS_1__reset__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__reset__no 0
+#define R_USB_RH_PORT_STATUS_1__reset__yes 1
+#define R_USB_RH_PORT_STATUS_1__overcurrent__BITNR 3
+#define R_USB_RH_PORT_STATUS_1__overcurrent__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__overcurrent__no 0
+#define R_USB_RH_PORT_STATUS_1__overcurrent__yes 1
+#define R_USB_RH_PORT_STATUS_1__suspended__BITNR 2
+#define R_USB_RH_PORT_STATUS_1__suspended__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__suspended__no 0
+#define R_USB_RH_PORT_STATUS_1__suspended__yes 1
+#define R_USB_RH_PORT_STATUS_1__enabled__BITNR 1
+#define R_USB_RH_PORT_STATUS_1__enabled__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__enabled__no 0
+#define R_USB_RH_PORT_STATUS_1__enabled__yes 1
+#define R_USB_RH_PORT_STATUS_1__connected__BITNR 0
+#define R_USB_RH_PORT_STATUS_1__connected__WIDTH 1
+#define R_USB_RH_PORT_STATUS_1__connected__no 0
+#define R_USB_RH_PORT_STATUS_1__connected__yes 1
+
+#define R_USB_RH_PORT_STATUS_2 (IO_TYPECAST_RO_UWORD 0xb000021a)
+#define R_USB_RH_PORT_STATUS_2__speed__BITNR 9
+#define R_USB_RH_PORT_STATUS_2__speed__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__speed__full 0
+#define R_USB_RH_PORT_STATUS_2__speed__low 1
+#define R_USB_RH_PORT_STATUS_2__power__BITNR 8
+#define R_USB_RH_PORT_STATUS_2__power__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__reset__BITNR 4
+#define R_USB_RH_PORT_STATUS_2__reset__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__reset__no 0
+#define R_USB_RH_PORT_STATUS_2__reset__yes 1
+#define R_USB_RH_PORT_STATUS_2__overcurrent__BITNR 3
+#define R_USB_RH_PORT_STATUS_2__overcurrent__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__overcurrent__no 0
+#define R_USB_RH_PORT_STATUS_2__overcurrent__yes 1
+#define R_USB_RH_PORT_STATUS_2__suspended__BITNR 2
+#define R_USB_RH_PORT_STATUS_2__suspended__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__suspended__no 0
+#define R_USB_RH_PORT_STATUS_2__suspended__yes 1
+#define R_USB_RH_PORT_STATUS_2__enabled__BITNR 1
+#define R_USB_RH_PORT_STATUS_2__enabled__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__enabled__no 0
+#define R_USB_RH_PORT_STATUS_2__enabled__yes 1
+#define R_USB_RH_PORT_STATUS_2__connected__BITNR 0
+#define R_USB_RH_PORT_STATUS_2__connected__WIDTH 1
+#define R_USB_RH_PORT_STATUS_2__connected__no 0
+#define R_USB_RH_PORT_STATUS_2__connected__yes 1
+
+#define R_USB_EPT_INDEX (IO_TYPECAST_BYTE 0xb0000208)
+#define R_USB_EPT_INDEX__value__BITNR 0
+#define R_USB_EPT_INDEX__value__WIDTH 5
+
+#define R_USB_EPT_DATA (IO_TYPECAST_UDWORD 0xb000021c)
+#define R_USB_EPT_DATA__valid__BITNR 31
+#define R_USB_EPT_DATA__valid__WIDTH 1
+#define R_USB_EPT_DATA__valid__no 0
+#define R_USB_EPT_DATA__valid__yes 1
+#define R_USB_EPT_DATA__hold__BITNR 30
+#define R_USB_EPT_DATA__hold__WIDTH 1
+#define R_USB_EPT_DATA__hold__no 0
+#define R_USB_EPT_DATA__hold__yes 1
+#define R_USB_EPT_DATA__error_count_in__BITNR 28
+#define R_USB_EPT_DATA__error_count_in__WIDTH 2
+#define R_USB_EPT_DATA__t_in__BITNR 27
+#define R_USB_EPT_DATA__t_in__WIDTH 1
+#define R_USB_EPT_DATA__low_speed__BITNR 26
+#define R_USB_EPT_DATA__low_speed__WIDTH 1
+#define R_USB_EPT_DATA__low_speed__no 0
+#define R_USB_EPT_DATA__low_speed__yes 1
+#define R_USB_EPT_DATA__port__BITNR 24
+#define R_USB_EPT_DATA__port__WIDTH 2
+#define R_USB_EPT_DATA__port__any 0
+#define R_USB_EPT_DATA__port__p1 1
+#define R_USB_EPT_DATA__port__p2 2
+#define R_USB_EPT_DATA__port__undef 3
+#define R_USB_EPT_DATA__error_code__BITNR 22
+#define R_USB_EPT_DATA__error_code__WIDTH 2
+#define R_USB_EPT_DATA__error_code__no_error 0
+#define R_USB_EPT_DATA__error_code__stall 1
+#define R_USB_EPT_DATA__error_code__bus_error 2
+#define R_USB_EPT_DATA__error_code__buffer_error 3
+#define R_USB_EPT_DATA__t_out__BITNR 21
+#define R_USB_EPT_DATA__t_out__WIDTH 1
+#define R_USB_EPT_DATA__error_count_out__BITNR 19
+#define R_USB_EPT_DATA__error_count_out__WIDTH 2
+#define R_USB_EPT_DATA__max_len__BITNR 11
+#define R_USB_EPT_DATA__max_len__WIDTH 7
+#define R_USB_EPT_DATA__ep__BITNR 7
+#define R_USB_EPT_DATA__ep__WIDTH 4
+#define R_USB_EPT_DATA__dev__BITNR 0
+#define R_USB_EPT_DATA__dev__WIDTH 7
+
+#define R_USB_EPT_DATA_ISO (IO_TYPECAST_UDWORD 0xb000021c)
+#define R_USB_EPT_DATA_ISO__valid__BITNR 31
+#define R_USB_EPT_DATA_ISO__valid__WIDTH 1
+#define R_USB_EPT_DATA_ISO__valid__no 0
+#define R_USB_EPT_DATA_ISO__valid__yes 1
+#define R_USB_EPT_DATA_ISO__port__BITNR 24
+#define R_USB_EPT_DATA_ISO__port__WIDTH 2
+#define R_USB_EPT_DATA_ISO__port__any 0
+#define R_USB_EPT_DATA_ISO__port__p1 1
+#define R_USB_EPT_DATA_ISO__port__p2 2
+#define R_USB_EPT_DATA_ISO__port__undef 3
+#define R_USB_EPT_DATA_ISO__error_code__BITNR 22
+#define R_USB_EPT_DATA_ISO__error_code__WIDTH 2
+#define R_USB_EPT_DATA_ISO__error_code__no_error 0
+#define R_USB_EPT_DATA_ISO__error_code__stall 1
+#define R_USB_EPT_DATA_ISO__error_code__bus_error 2
+#define R_USB_EPT_DATA_ISO__error_code__TBD3 3
+#define R_USB_EPT_DATA_ISO__max_len__BITNR 11
+#define R_USB_EPT_DATA_ISO__max_len__WIDTH 10
+#define R_USB_EPT_DATA_ISO__ep__BITNR 7
+#define R_USB_EPT_DATA_ISO__ep__WIDTH 4
+#define R_USB_EPT_DATA_ISO__dev__BITNR 0
+#define R_USB_EPT_DATA_ISO__dev__WIDTH 7
+
+#define R_USB_EPT_DATA_DEV (IO_TYPECAST_UDWORD 0xb000021c)
+#define R_USB_EPT_DATA_DEV__valid__BITNR 31
+#define R_USB_EPT_DATA_DEV__valid__WIDTH 1
+#define R_USB_EPT_DATA_DEV__valid__no 0
+#define R_USB_EPT_DATA_DEV__valid__yes 1
+#define R_USB_EPT_DATA_DEV__hold__BITNR 30
+#define R_USB_EPT_DATA_DEV__hold__WIDTH 1
+#define R_USB_EPT_DATA_DEV__hold__no 0
+#define R_USB_EPT_DATA_DEV__hold__yes 1
+#define R_USB_EPT_DATA_DEV__stall__BITNR 29
+#define R_USB_EPT_DATA_DEV__stall__WIDTH 1
+#define R_USB_EPT_DATA_DEV__stall__no 0
+#define R_USB_EPT_DATA_DEV__stall__yes 1
+#define R_USB_EPT_DATA_DEV__iso_resp__BITNR 28
+#define R_USB_EPT_DATA_DEV__iso_resp__WIDTH 1
+#define R_USB_EPT_DATA_DEV__iso_resp__quiet 0
+#define R_USB_EPT_DATA_DEV__iso_resp__yes 1
+#define R_USB_EPT_DATA_DEV__ctrl__BITNR 27
+#define R_USB_EPT_DATA_DEV__ctrl__WIDTH 1
+#define R_USB_EPT_DATA_DEV__ctrl__no 0
+#define R_USB_EPT_DATA_DEV__ctrl__yes 1
+#define R_USB_EPT_DATA_DEV__iso__BITNR 26
+#define R_USB_EPT_DATA_DEV__iso__WIDTH 1
+#define R_USB_EPT_DATA_DEV__iso__no 0
+#define R_USB_EPT_DATA_DEV__iso__yes 1
+#define R_USB_EPT_DATA_DEV__port__BITNR 24
+#define R_USB_EPT_DATA_DEV__port__WIDTH 2
+#define R_USB_EPT_DATA_DEV__control_phase__BITNR 22
+#define R_USB_EPT_DATA_DEV__control_phase__WIDTH 1
+#define R_USB_EPT_DATA_DEV__t__BITNR 21
+#define R_USB_EPT_DATA_DEV__t__WIDTH 1
+#define R_USB_EPT_DATA_DEV__max_len__BITNR 11
+#define R_USB_EPT_DATA_DEV__max_len__WIDTH 10
+#define R_USB_EPT_DATA_DEV__ep__BITNR 7
+#define R_USB_EPT_DATA_DEV__ep__WIDTH 4
+#define R_USB_EPT_DATA_DEV__dev__BITNR 0
+#define R_USB_EPT_DATA_DEV__dev__WIDTH 7
+
+#define R_USB_SNMP_TERROR (IO_TYPECAST_UDWORD 0xb0000220)
+#define R_USB_SNMP_TERROR__value__BITNR 0
+#define R_USB_SNMP_TERROR__value__WIDTH 32
+
+#define R_USB_EPID_ATTN (IO_TYPECAST_RO_UDWORD 0xb0000224)
+#define R_USB_EPID_ATTN__value__BITNR 0
+#define R_USB_EPID_ATTN__value__WIDTH 32
+
+#define R_USB_PORT1_DISABLE (IO_TYPECAST_BYTE 0xb000006a)
+#define R_USB_PORT1_DISABLE__disable__BITNR 0
+#define R_USB_PORT1_DISABLE__disable__WIDTH 1
+#define R_USB_PORT1_DISABLE__disable__yes 0
+#define R_USB_PORT1_DISABLE__disable__no 1
+
+#define R_USB_PORT2_DISABLE (IO_TYPECAST_BYTE 0xb0000052)
+#define R_USB_PORT2_DISABLE__disable__BITNR 0
+#define R_USB_PORT2_DISABLE__disable__WIDTH 1
+#define R_USB_PORT2_DISABLE__disable__yes 0
+#define R_USB_PORT2_DISABLE__disable__no 1
+
+/*
+!* MMU registers
+!*/
+
+#define R_MMU_CONFIG (IO_TYPECAST_UDWORD 0xb0000240)
+#define R_MMU_CONFIG__mmu_enable__BITNR 31
+#define R_MMU_CONFIG__mmu_enable__WIDTH 1
+#define R_MMU_CONFIG__mmu_enable__enable 1
+#define R_MMU_CONFIG__mmu_enable__disable 0
+#define R_MMU_CONFIG__inv_excp__BITNR 18
+#define R_MMU_CONFIG__inv_excp__WIDTH 1
+#define R_MMU_CONFIG__inv_excp__enable 1
+#define R_MMU_CONFIG__inv_excp__disable 0
+#define R_MMU_CONFIG__acc_excp__BITNR 17
+#define R_MMU_CONFIG__acc_excp__WIDTH 1
+#define R_MMU_CONFIG__acc_excp__enable 1
+#define R_MMU_CONFIG__acc_excp__disable 0
+#define R_MMU_CONFIG__we_excp__BITNR 16
+#define R_MMU_CONFIG__we_excp__WIDTH 1
+#define R_MMU_CONFIG__we_excp__enable 1
+#define R_MMU_CONFIG__we_excp__disable 0
+#define R_MMU_CONFIG__seg_f__BITNR 15
+#define R_MMU_CONFIG__seg_f__WIDTH 1
+#define R_MMU_CONFIG__seg_f__seg 1
+#define R_MMU_CONFIG__seg_f__page 0
+#define R_MMU_CONFIG__seg_e__BITNR 14
+#define R_MMU_CONFIG__seg_e__WIDTH 1
+#define R_MMU_CONFIG__seg_e__seg 1
+#define R_MMU_CONFIG__seg_e__page 0
+#define R_MMU_CONFIG__seg_d__BITNR 13
+#define R_MMU_CONFIG__seg_d__WIDTH 1
+#define R_MMU_CONFIG__seg_d__seg 1
+#define R_MMU_CONFIG__seg_d__page 0
+#define R_MMU_CONFIG__seg_c__BITNR 12
+#define R_MMU_CONFIG__seg_c__WIDTH 1
+#define R_MMU_CONFIG__seg_c__seg 1
+#define R_MMU_CONFIG__seg_c__page 0
+#define R_MMU_CONFIG__seg_b__BITNR 11
+#define R_MMU_CONFIG__seg_b__WIDTH 1
+#define R_MMU_CONFIG__seg_b__seg 1
+#define R_MMU_CONFIG__seg_b__page 0
+#define R_MMU_CONFIG__seg_a__BITNR 10
+#define R_MMU_CONFIG__seg_a__WIDTH 1
+#define R_MMU_CONFIG__seg_a__seg 1
+#define R_MMU_CONFIG__seg_a__page 0
+#define R_MMU_CONFIG__seg_9__BITNR 9
+#define R_MMU_CONFIG__seg_9__WIDTH 1
+#define R_MMU_CONFIG__seg_9__seg 1
+#define R_MMU_CONFIG__seg_9__page 0
+#define R_MMU_CONFIG__seg_8__BITNR 8
+#define R_MMU_CONFIG__seg_8__WIDTH 1
+#define R_MMU_CONFIG__seg_8__seg 1
+#define R_MMU_CONFIG__seg_8__page 0
+#define R_MMU_CONFIG__seg_7__BITNR 7
+#define R_MMU_CONFIG__seg_7__WIDTH 1
+#define R_MMU_CONFIG__seg_7__seg 1
+#define R_MMU_CONFIG__seg_7__page 0
+#define R_MMU_CONFIG__seg_6__BITNR 6
+#define R_MMU_CONFIG__seg_6__WIDTH 1
+#define R_MMU_CONFIG__seg_6__seg 1
+#define R_MMU_CONFIG__seg_6__page 0
+#define R_MMU_CONFIG__seg_5__BITNR 5
+#define R_MMU_CONFIG__seg_5__WIDTH 1
+#define R_MMU_CONFIG__seg_5__seg 1
+#define R_MMU_CONFIG__seg_5__page 0
+#define R_MMU_CONFIG__seg_4__BITNR 4
+#define R_MMU_CONFIG__seg_4__WIDTH 1
+#define R_MMU_CONFIG__seg_4__seg 1
+#define R_MMU_CONFIG__seg_4__page 0
+#define R_MMU_CONFIG__seg_3__BITNR 3
+#define R_MMU_CONFIG__seg_3__WIDTH 1
+#define R_MMU_CONFIG__seg_3__seg 1
+#define R_MMU_CONFIG__seg_3__page 0
+#define R_MMU_CONFIG__seg_2__BITNR 2
+#define R_MMU_CONFIG__seg_2__WIDTH 1
+#define R_MMU_CONFIG__seg_2__seg 1
+#define R_MMU_CONFIG__seg_2__page 0
+#define R_MMU_CONFIG__seg_1__BITNR 1
+#define R_MMU_CONFIG__seg_1__WIDTH 1
+#define R_MMU_CONFIG__seg_1__seg 1
+#define R_MMU_CONFIG__seg_1__page 0
+#define R_MMU_CONFIG__seg_0__BITNR 0
+#define R_MMU_CONFIG__seg_0__WIDTH 1
+#define R_MMU_CONFIG__seg_0__seg 1
+#define R_MMU_CONFIG__seg_0__page 0
+
+#define R_MMU_KSEG (IO_TYPECAST_UWORD 0xb0000240)
+#define R_MMU_KSEG__seg_f__BITNR 15
+#define R_MMU_KSEG__seg_f__WIDTH 1
+#define R_MMU_KSEG__seg_f__seg 1
+#define R_MMU_KSEG__seg_f__page 0
+#define R_MMU_KSEG__seg_e__BITNR 14
+#define R_MMU_KSEG__seg_e__WIDTH 1
+#define R_MMU_KSEG__seg_e__seg 1
+#define R_MMU_KSEG__seg_e__page 0
+#define R_MMU_KSEG__seg_d__BITNR 13
+#define R_MMU_KSEG__seg_d__WIDTH 1
+#define R_MMU_KSEG__seg_d__seg 1
+#define R_MMU_KSEG__seg_d__page 0
+#define R_MMU_KSEG__seg_c__BITNR 12
+#define R_MMU_KSEG__seg_c__WIDTH 1
+#define R_MMU_KSEG__seg_c__seg 1
+#define R_MMU_KSEG__seg_c__page 0
+#define R_MMU_KSEG__seg_b__BITNR 11
+#define R_MMU_KSEG__seg_b__WIDTH 1
+#define R_MMU_KSEG__seg_b__seg 1
+#define R_MMU_KSEG__seg_b__page 0
+#define R_MMU_KSEG__seg_a__BITNR 10
+#define R_MMU_KSEG__seg_a__WIDTH 1
+#define R_MMU_KSEG__seg_a__seg 1
+#define R_MMU_KSEG__seg_a__page 0
+#define R_MMU_KSEG__seg_9__BITNR 9
+#define R_MMU_KSEG__seg_9__WIDTH 1
+#define R_MMU_KSEG__seg_9__seg 1
+#define R_MMU_KSEG__seg_9__page 0
+#define R_MMU_KSEG__seg_8__BITNR 8
+#define R_MMU_KSEG__seg_8__WIDTH 1
+#define R_MMU_KSEG__seg_8__seg 1
+#define R_MMU_KSEG__seg_8__page 0
+#define R_MMU_KSEG__seg_7__BITNR 7
+#define R_MMU_KSEG__seg_7__WIDTH 1
+#define R_MMU_KSEG__seg_7__seg 1
+#define R_MMU_KSEG__seg_7__page 0
+#define R_MMU_KSEG__seg_6__BITNR 6
+#define R_MMU_KSEG__seg_6__WIDTH 1
+#define R_MMU_KSEG__seg_6__seg 1
+#define R_MMU_KSEG__seg_6__page 0
+#define R_MMU_KSEG__seg_5__BITNR 5
+#define R_MMU_KSEG__seg_5__WIDTH 1
+#define R_MMU_KSEG__seg_5__seg 1
+#define R_MMU_KSEG__seg_5__page 0
+#define R_MMU_KSEG__seg_4__BITNR 4
+#define R_MMU_KSEG__seg_4__WIDTH 1
+#define R_MMU_KSEG__seg_4__seg 1
+#define R_MMU_KSEG__seg_4__page 0
+#define R_MMU_KSEG__seg_3__BITNR 3
+#define R_MMU_KSEG__seg_3__WIDTH 1
+#define R_MMU_KSEG__seg_3__seg 1
+#define R_MMU_KSEG__seg_3__page 0
+#define R_MMU_KSEG__seg_2__BITNR 2
+#define R_MMU_KSEG__seg_2__WIDTH 1
+#define R_MMU_KSEG__seg_2__seg 1
+#define R_MMU_KSEG__seg_2__page 0
+#define R_MMU_KSEG__seg_1__BITNR 1
+#define R_MMU_KSEG__seg_1__WIDTH 1
+#define R_MMU_KSEG__seg_1__seg 1
+#define R_MMU_KSEG__seg_1__page 0
+#define R_MMU_KSEG__seg_0__BITNR 0
+#define R_MMU_KSEG__seg_0__WIDTH 1
+#define R_MMU_KSEG__seg_0__seg 1
+#define R_MMU_KSEG__seg_0__page 0
+
+#define R_MMU_CTRL (IO_TYPECAST_BYTE 0xb0000242)
+#define R_MMU_CTRL__inv_excp__BITNR 2
+#define R_MMU_CTRL__inv_excp__WIDTH 1
+#define R_MMU_CTRL__inv_excp__enable 1
+#define R_MMU_CTRL__inv_excp__disable 0
+#define R_MMU_CTRL__acc_excp__BITNR 1
+#define R_MMU_CTRL__acc_excp__WIDTH 1
+#define R_MMU_CTRL__acc_excp__enable 1
+#define R_MMU_CTRL__acc_excp__disable 0
+#define R_MMU_CTRL__we_excp__BITNR 0
+#define R_MMU_CTRL__we_excp__WIDTH 1
+#define R_MMU_CTRL__we_excp__enable 1
+#define R_MMU_CTRL__we_excp__disable 0
+
+#define R_MMU_ENABLE (IO_TYPECAST_BYTE 0xb0000243)
+#define R_MMU_ENABLE__mmu_enable__BITNR 7
+#define R_MMU_ENABLE__mmu_enable__WIDTH 1
+#define R_MMU_ENABLE__mmu_enable__enable 1
+#define R_MMU_ENABLE__mmu_enable__disable 0
+
+#define R_MMU_KBASE_LO (IO_TYPECAST_UDWORD 0xb0000244)
+#define R_MMU_KBASE_LO__base_7__BITNR 28
+#define R_MMU_KBASE_LO__base_7__WIDTH 4
+#define R_MMU_KBASE_LO__base_6__BITNR 24
+#define R_MMU_KBASE_LO__base_6__WIDTH 4
+#define R_MMU_KBASE_LO__base_5__BITNR 20
+#define R_MMU_KBASE_LO__base_5__WIDTH 4
+#define R_MMU_KBASE_LO__base_4__BITNR 16
+#define R_MMU_KBASE_LO__base_4__WIDTH 4
+#define R_MMU_KBASE_LO__base_3__BITNR 12
+#define R_MMU_KBASE_LO__base_3__WIDTH 4
+#define R_MMU_KBASE_LO__base_2__BITNR 8
+#define R_MMU_KBASE_LO__base_2__WIDTH 4
+#define R_MMU_KBASE_LO__base_1__BITNR 4
+#define R_MMU_KBASE_LO__base_1__WIDTH 4
+#define R_MMU_KBASE_LO__base_0__BITNR 0
+#define R_MMU_KBASE_LO__base_0__WIDTH 4
+
+#define R_MMU_KBASE_HI (IO_TYPECAST_UDWORD 0xb0000248)
+#define R_MMU_KBASE_HI__base_f__BITNR 28
+#define R_MMU_KBASE_HI__base_f__WIDTH 4
+#define R_MMU_KBASE_HI__base_e__BITNR 24
+#define R_MMU_KBASE_HI__base_e__WIDTH 4
+#define R_MMU_KBASE_HI__base_d__BITNR 20
+#define R_MMU_KBASE_HI__base_d__WIDTH 4
+#define R_MMU_KBASE_HI__base_c__BITNR 16
+#define R_MMU_KBASE_HI__base_c__WIDTH 4
+#define R_MMU_KBASE_HI__base_b__BITNR 12
+#define R_MMU_KBASE_HI__base_b__WIDTH 4
+#define R_MMU_KBASE_HI__base_a__BITNR 8
+#define R_MMU_KBASE_HI__base_a__WIDTH 4
+#define R_MMU_KBASE_HI__base_9__BITNR 4
+#define R_MMU_KBASE_HI__base_9__WIDTH 4
+#define R_MMU_KBASE_HI__base_8__BITNR 0
+#define R_MMU_KBASE_HI__base_8__WIDTH 4
+
+#define R_MMU_CONTEXT (IO_TYPECAST_BYTE 0xb000024c)
+#define R_MMU_CONTEXT__page_id__BITNR 0
+#define R_MMU_CONTEXT__page_id__WIDTH 6
+
+#define R_MMU_CAUSE (IO_TYPECAST_RO_UDWORD 0xb0000250)
+#define R_MMU_CAUSE__vpn__BITNR 13
+#define R_MMU_CAUSE__vpn__WIDTH 19
+#define R_MMU_CAUSE__miss_excp__BITNR 12
+#define R_MMU_CAUSE__miss_excp__WIDTH 1
+#define R_MMU_CAUSE__miss_excp__yes 1
+#define R_MMU_CAUSE__miss_excp__no 0
+#define R_MMU_CAUSE__inv_excp__BITNR 11
+#define R_MMU_CAUSE__inv_excp__WIDTH 1
+#define R_MMU_CAUSE__inv_excp__yes 1
+#define R_MMU_CAUSE__inv_excp__no 0
+#define R_MMU_CAUSE__acc_excp__BITNR 10
+#define R_MMU_CAUSE__acc_excp__WIDTH 1
+#define R_MMU_CAUSE__acc_excp__yes 1
+#define R_MMU_CAUSE__acc_excp__no 0
+#define R_MMU_CAUSE__we_excp__BITNR 9
+#define R_MMU_CAUSE__we_excp__WIDTH 1
+#define R_MMU_CAUSE__we_excp__yes 1
+#define R_MMU_CAUSE__we_excp__no 0
+#define R_MMU_CAUSE__wr_rd__BITNR 8
+#define R_MMU_CAUSE__wr_rd__WIDTH 1
+#define R_MMU_CAUSE__wr_rd__write 1
+#define R_MMU_CAUSE__wr_rd__read 0
+#define R_MMU_CAUSE__page_id__BITNR 0
+#define R_MMU_CAUSE__page_id__WIDTH 6
+
+#define R_TLB_SELECT (IO_TYPECAST_BYTE 0xb0000254)
+#define R_TLB_SELECT__index__BITNR 0
+#define R_TLB_SELECT__index__WIDTH 6
+
+#define R_TLB_LO (IO_TYPECAST_UDWORD 0xb0000258)
+#define R_TLB_LO__pfn__BITNR 13
+#define R_TLB_LO__pfn__WIDTH 19
+#define R_TLB_LO__global__BITNR 3
+#define R_TLB_LO__global__WIDTH 1
+#define R_TLB_LO__global__yes 1
+#define R_TLB_LO__global__no 0
+#define R_TLB_LO__valid__BITNR 2
+#define R_TLB_LO__valid__WIDTH 1
+#define R_TLB_LO__valid__yes 1
+#define R_TLB_LO__valid__no 0
+#define R_TLB_LO__kernel__BITNR 1
+#define R_TLB_LO__kernel__WIDTH 1
+#define R_TLB_LO__kernel__yes 1
+#define R_TLB_LO__kernel__no 0
+#define R_TLB_LO__we__BITNR 0
+#define R_TLB_LO__we__WIDTH 1
+#define R_TLB_LO__we__yes 1
+#define R_TLB_LO__we__no 0
+
+#define R_TLB_HI (IO_TYPECAST_UDWORD 0xb000025c)
+#define R_TLB_HI__vpn__BITNR 13
+#define R_TLB_HI__vpn__WIDTH 19
+#define R_TLB_HI__page_id__BITNR 0
+#define R_TLB_HI__page_id__WIDTH 6
+
+/*
+!* Syncrounous serial port registers
+!*/
+
+#define R_SYNC_SERIAL1_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000006c)
+#define R_SYNC_SERIAL1_REC_DATA__data_in__BITNR 0
+#define R_SYNC_SERIAL1_REC_DATA__data_in__WIDTH 32
+
+#define R_SYNC_SERIAL1_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000006c)
+#define R_SYNC_SERIAL1_REC_WORD__data_in__BITNR 0
+#define R_SYNC_SERIAL1_REC_WORD__data_in__WIDTH 16
+
+#define R_SYNC_SERIAL1_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000006c)
+#define R_SYNC_SERIAL1_REC_BYTE__data_in__BITNR 0
+#define R_SYNC_SERIAL1_REC_BYTE__data_in__WIDTH 8
+
+#define R_SYNC_SERIAL1_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000068)
+#define R_SYNC_SERIAL1_STATUS__rec_status__BITNR 15
+#define R_SYNC_SERIAL1_STATUS__rec_status__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__rec_status__running 0
+#define R_SYNC_SERIAL1_STATUS__rec_status__idle 1
+#define R_SYNC_SERIAL1_STATUS__tr_empty__BITNR 14
+#define R_SYNC_SERIAL1_STATUS__tr_empty__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__tr_empty__empty 1
+#define R_SYNC_SERIAL1_STATUS__tr_empty__not_empty 0
+#define R_SYNC_SERIAL1_STATUS__tr_ready__BITNR 13
+#define R_SYNC_SERIAL1_STATUS__tr_ready__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__tr_ready__full 0
+#define R_SYNC_SERIAL1_STATUS__tr_ready__ready 1
+#define R_SYNC_SERIAL1_STATUS__pin_1__BITNR 12
+#define R_SYNC_SERIAL1_STATUS__pin_1__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__pin_1__low 0
+#define R_SYNC_SERIAL1_STATUS__pin_1__high 1
+#define R_SYNC_SERIAL1_STATUS__pin_0__BITNR 11
+#define R_SYNC_SERIAL1_STATUS__pin_0__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__pin_0__low 0
+#define R_SYNC_SERIAL1_STATUS__pin_0__high 1
+#define R_SYNC_SERIAL1_STATUS__underflow__BITNR 10
+#define R_SYNC_SERIAL1_STATUS__underflow__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__underflow__no 0
+#define R_SYNC_SERIAL1_STATUS__underflow__yes 1
+#define R_SYNC_SERIAL1_STATUS__overrun__BITNR 9
+#define R_SYNC_SERIAL1_STATUS__overrun__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__overrun__no 0
+#define R_SYNC_SERIAL1_STATUS__overrun__yes 1
+#define R_SYNC_SERIAL1_STATUS__data_avail__BITNR 8
+#define R_SYNC_SERIAL1_STATUS__data_avail__WIDTH 1
+#define R_SYNC_SERIAL1_STATUS__data_avail__no 0
+#define R_SYNC_SERIAL1_STATUS__data_avail__yes 1
+#define R_SYNC_SERIAL1_STATUS__data__BITNR 0
+#define R_SYNC_SERIAL1_STATUS__data__WIDTH 8
+
+#define R_SYNC_SERIAL1_TR_DATA (IO_TYPECAST_UDWORD 0xb000006c)
+#define R_SYNC_SERIAL1_TR_DATA__data_out__BITNR 0
+#define R_SYNC_SERIAL1_TR_DATA__data_out__WIDTH 32
+
+#define R_SYNC_SERIAL1_TR_WORD (IO_TYPECAST_UWORD 0xb000006c)
+#define R_SYNC_SERIAL1_TR_WORD__data_out__BITNR 0
+#define R_SYNC_SERIAL1_TR_WORD__data_out__WIDTH 16
+
+#define R_SYNC_SERIAL1_TR_BYTE (IO_TYPECAST_BYTE 0xb000006c)
+#define R_SYNC_SERIAL1_TR_BYTE__data_out__BITNR 0
+#define R_SYNC_SERIAL1_TR_BYTE__data_out__WIDTH 8
+
+#define R_SYNC_SERIAL1_CTRL (IO_TYPECAST_UDWORD 0xb0000068)
+#define R_SYNC_SERIAL1_CTRL__tr_baud__BITNR 28
+#define R_SYNC_SERIAL1_CTRL__tr_baud__WIDTH 4
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c150Hz 0
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c300Hz 1
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c600Hz 2
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c1200Hz 3
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c2400Hz 4
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c4800Hz 5
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c9600Hz 6
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c19k2Hz 7
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c28k8Hz 8
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c57k6Hz 9
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c115k2Hz 10
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c230k4Hz 11
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c460k8Hz 12
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c921k6Hz 13
+#define R_SYNC_SERIAL1_CTRL__tr_baud__c3125kHz 14
+#define R_SYNC_SERIAL1_CTRL__tr_baud__reserved 15
+#define R_SYNC_SERIAL1_CTRL__dma_enable__BITNR 27
+#define R_SYNC_SERIAL1_CTRL__dma_enable__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__dma_enable__on 1
+#define R_SYNC_SERIAL1_CTRL__dma_enable__off 0
+#define R_SYNC_SERIAL1_CTRL__mode__BITNR 24
+#define R_SYNC_SERIAL1_CTRL__mode__WIDTH 3
+#define R_SYNC_SERIAL1_CTRL__mode__master_output 0
+#define R_SYNC_SERIAL1_CTRL__mode__slave_output 1
+#define R_SYNC_SERIAL1_CTRL__mode__master_input 2
+#define R_SYNC_SERIAL1_CTRL__mode__slave_input 3
+#define R_SYNC_SERIAL1_CTRL__mode__master_bidir 4
+#define R_SYNC_SERIAL1_CTRL__mode__slave_bidir 5
+#define R_SYNC_SERIAL1_CTRL__error__BITNR 23
+#define R_SYNC_SERIAL1_CTRL__error__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__error__normal 0
+#define R_SYNC_SERIAL1_CTRL__error__ignore 1
+#define R_SYNC_SERIAL1_CTRL__rec_enable__BITNR 22
+#define R_SYNC_SERIAL1_CTRL__rec_enable__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__rec_enable__disable 0
+#define R_SYNC_SERIAL1_CTRL__rec_enable__enable 1
+#define R_SYNC_SERIAL1_CTRL__f_synctype__BITNR 21
+#define R_SYNC_SERIAL1_CTRL__f_synctype__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__f_synctype__normal 0
+#define R_SYNC_SERIAL1_CTRL__f_synctype__early 1
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__BITNR 19
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__WIDTH 2
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__bit 0
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__word 1
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__extended 2
+#define R_SYNC_SERIAL1_CTRL__f_syncsize__reserved 3
+#define R_SYNC_SERIAL1_CTRL__f_sync__BITNR 18
+#define R_SYNC_SERIAL1_CTRL__f_sync__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__f_sync__on 0
+#define R_SYNC_SERIAL1_CTRL__f_sync__off 1
+#define R_SYNC_SERIAL1_CTRL__clk_mode__BITNR 17
+#define R_SYNC_SERIAL1_CTRL__clk_mode__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__clk_mode__normal 0
+#define R_SYNC_SERIAL1_CTRL__clk_mode__gated 1
+#define R_SYNC_SERIAL1_CTRL__clk_halt__BITNR 16
+#define R_SYNC_SERIAL1_CTRL__clk_halt__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__clk_halt__running 0
+#define R_SYNC_SERIAL1_CTRL__clk_halt__stopped 1
+#define R_SYNC_SERIAL1_CTRL__bitorder__BITNR 15
+#define R_SYNC_SERIAL1_CTRL__bitorder__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__bitorder__lsb 0
+#define R_SYNC_SERIAL1_CTRL__bitorder__msb 1
+#define R_SYNC_SERIAL1_CTRL__tr_enable__BITNR 14
+#define R_SYNC_SERIAL1_CTRL__tr_enable__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__tr_enable__disable 0
+#define R_SYNC_SERIAL1_CTRL__tr_enable__enable 1
+#define R_SYNC_SERIAL1_CTRL__wordsize__BITNR 11
+#define R_SYNC_SERIAL1_CTRL__wordsize__WIDTH 3
+#define R_SYNC_SERIAL1_CTRL__wordsize__size8bit 0
+#define R_SYNC_SERIAL1_CTRL__wordsize__size12bit 1
+#define R_SYNC_SERIAL1_CTRL__wordsize__size16bit 2
+#define R_SYNC_SERIAL1_CTRL__wordsize__size24bit 3
+#define R_SYNC_SERIAL1_CTRL__wordsize__size32bit 4
+#define R_SYNC_SERIAL1_CTRL__buf_empty__BITNR 10
+#define R_SYNC_SERIAL1_CTRL__buf_empty__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_8 0
+#define R_SYNC_SERIAL1_CTRL__buf_empty__lmt_0 1
+#define R_SYNC_SERIAL1_CTRL__buf_full__BITNR 9
+#define R_SYNC_SERIAL1_CTRL__buf_full__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_32 0
+#define R_SYNC_SERIAL1_CTRL__buf_full__lmt_8 1
+#define R_SYNC_SERIAL1_CTRL__flow_ctrl__BITNR 8
+#define R_SYNC_SERIAL1_CTRL__flow_ctrl__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__flow_ctrl__disabled 0
+#define R_SYNC_SERIAL1_CTRL__flow_ctrl__enabled 1
+#define R_SYNC_SERIAL1_CTRL__clk_polarity__BITNR 6
+#define R_SYNC_SERIAL1_CTRL__clk_polarity__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__clk_polarity__pos 0
+#define R_SYNC_SERIAL1_CTRL__clk_polarity__neg 1
+#define R_SYNC_SERIAL1_CTRL__frame_polarity__BITNR 5
+#define R_SYNC_SERIAL1_CTRL__frame_polarity__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__frame_polarity__normal 0
+#define R_SYNC_SERIAL1_CTRL__frame_polarity__inverted 1
+#define R_SYNC_SERIAL1_CTRL__status_polarity__BITNR 4
+#define R_SYNC_SERIAL1_CTRL__status_polarity__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__status_polarity__normal 0
+#define R_SYNC_SERIAL1_CTRL__status_polarity__inverted 1
+#define R_SYNC_SERIAL1_CTRL__clk_driver__BITNR 3
+#define R_SYNC_SERIAL1_CTRL__clk_driver__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__clk_driver__normal 0
+#define R_SYNC_SERIAL1_CTRL__clk_driver__inverted 1
+#define R_SYNC_SERIAL1_CTRL__frame_driver__BITNR 2
+#define R_SYNC_SERIAL1_CTRL__frame_driver__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__frame_driver__normal 0
+#define R_SYNC_SERIAL1_CTRL__frame_driver__inverted 1
+#define R_SYNC_SERIAL1_CTRL__status_driver__BITNR 1
+#define R_SYNC_SERIAL1_CTRL__status_driver__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__status_driver__normal 0
+#define R_SYNC_SERIAL1_CTRL__status_driver__inverted 1
+#define R_SYNC_SERIAL1_CTRL__def_out0__BITNR 0
+#define R_SYNC_SERIAL1_CTRL__def_out0__WIDTH 1
+#define R_SYNC_SERIAL1_CTRL__def_out0__high 1
+#define R_SYNC_SERIAL1_CTRL__def_out0__low 0
+
+#define R_SYNC_SERIAL3_REC_DATA (IO_TYPECAST_RO_UDWORD 0xb000007c)
+#define R_SYNC_SERIAL3_REC_DATA__data_in__BITNR 0
+#define R_SYNC_SERIAL3_REC_DATA__data_in__WIDTH 32
+
+#define R_SYNC_SERIAL3_REC_WORD (IO_TYPECAST_RO_UWORD 0xb000007c)
+#define R_SYNC_SERIAL3_REC_WORD__data_in__BITNR 0
+#define R_SYNC_SERIAL3_REC_WORD__data_in__WIDTH 16
+
+#define R_SYNC_SERIAL3_REC_BYTE (IO_TYPECAST_RO_BYTE 0xb000007c)
+#define R_SYNC_SERIAL3_REC_BYTE__data_in__BITNR 0
+#define R_SYNC_SERIAL3_REC_BYTE__data_in__WIDTH 8
+
+#define R_SYNC_SERIAL3_STATUS (IO_TYPECAST_RO_UDWORD 0xb0000078)
+#define R_SYNC_SERIAL3_STATUS__rec_status__BITNR 15
+#define R_SYNC_SERIAL3_STATUS__rec_status__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__rec_status__running 0
+#define R_SYNC_SERIAL3_STATUS__rec_status__idle 1
+#define R_SYNC_SERIAL3_STATUS__tr_empty__BITNR 14
+#define R_SYNC_SERIAL3_STATUS__tr_empty__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__tr_empty__empty 1
+#define R_SYNC_SERIAL3_STATUS__tr_empty__not_empty 0
+#define R_SYNC_SERIAL3_STATUS__tr_ready__BITNR 13
+#define R_SYNC_SERIAL3_STATUS__tr_ready__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__tr_ready__full 0
+#define R_SYNC_SERIAL3_STATUS__tr_ready__ready 1
+#define R_SYNC_SERIAL3_STATUS__pin_1__BITNR 12
+#define R_SYNC_SERIAL3_STATUS__pin_1__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__pin_1__low 0
+#define R_SYNC_SERIAL3_STATUS__pin_1__high 1
+#define R_SYNC_SERIAL3_STATUS__pin_0__BITNR 11
+#define R_SYNC_SERIAL3_STATUS__pin_0__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__pin_0__low 0
+#define R_SYNC_SERIAL3_STATUS__pin_0__high 1
+#define R_SYNC_SERIAL3_STATUS__underflow__BITNR 10
+#define R_SYNC_SERIAL3_STATUS__underflow__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__underflow__no 0
+#define R_SYNC_SERIAL3_STATUS__underflow__yes 1
+#define R_SYNC_SERIAL3_STATUS__overrun__BITNR 9
+#define R_SYNC_SERIAL3_STATUS__overrun__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__overrun__no 0
+#define R_SYNC_SERIAL3_STATUS__overrun__yes 1
+#define R_SYNC_SERIAL3_STATUS__data_avail__BITNR 8
+#define R_SYNC_SERIAL3_STATUS__data_avail__WIDTH 1
+#define R_SYNC_SERIAL3_STATUS__data_avail__no 0
+#define R_SYNC_SERIAL3_STATUS__data_avail__yes 1
+#define R_SYNC_SERIAL3_STATUS__data__BITNR 0
+#define R_SYNC_SERIAL3_STATUS__data__WIDTH 8
+
+#define R_SYNC_SERIAL3_TR_DATA (IO_TYPECAST_UDWORD 0xb000007c)
+#define R_SYNC_SERIAL3_TR_DATA__data_out__BITNR 0
+#define R_SYNC_SERIAL3_TR_DATA__data_out__WIDTH 32
+
+#define R_SYNC_SERIAL3_TR_WORD (IO_TYPECAST_UWORD 0xb000007c)
+#define R_SYNC_SERIAL3_TR_WORD__data_out__BITNR 0
+#define R_SYNC_SERIAL3_TR_WORD__data_out__WIDTH 16
+
+#define R_SYNC_SERIAL3_TR_BYTE (IO_TYPECAST_BYTE 0xb000007c)
+#define R_SYNC_SERIAL3_TR_BYTE__data_out__BITNR 0
+#define R_SYNC_SERIAL3_TR_BYTE__data_out__WIDTH 8
+
+#define R_SYNC_SERIAL3_CTRL (IO_TYPECAST_UDWORD 0xb0000078)
+#define R_SYNC_SERIAL3_CTRL__tr_baud__BITNR 28
+#define R_SYNC_SERIAL3_CTRL__tr_baud__WIDTH 4
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c150Hz 0
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c300Hz 1
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c600Hz 2
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c1200Hz 3
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c2400Hz 4
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c4800Hz 5
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c9600Hz 6
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c19k2Hz 7
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c28k8Hz 8
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c57k6Hz 9
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c115k2Hz 10
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c230k4Hz 11
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c460k8Hz 12
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c921k6Hz 13
+#define R_SYNC_SERIAL3_CTRL__tr_baud__c3125kHz 14
+#define R_SYNC_SERIAL3_CTRL__tr_baud__reserved 15
+#define R_SYNC_SERIAL3_CTRL__dma_enable__BITNR 27
+#define R_SYNC_SERIAL3_CTRL__dma_enable__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__dma_enable__on 1
+#define R_SYNC_SERIAL3_CTRL__dma_enable__off 0
+#define R_SYNC_SERIAL3_CTRL__mode__BITNR 24
+#define R_SYNC_SERIAL3_CTRL__mode__WIDTH 3
+#define R_SYNC_SERIAL3_CTRL__mode__master_output 0
+#define R_SYNC_SERIAL3_CTRL__mode__slave_output 1
+#define R_SYNC_SERIAL3_CTRL__mode__master_input 2
+#define R_SYNC_SERIAL3_CTRL__mode__slave_input 3
+#define R_SYNC_SERIAL3_CTRL__mode__master_bidir 4
+#define R_SYNC_SERIAL3_CTRL__mode__slave_bidir 5
+#define R_SYNC_SERIAL3_CTRL__error__BITNR 23
+#define R_SYNC_SERIAL3_CTRL__error__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__error__normal 0
+#define R_SYNC_SERIAL3_CTRL__error__ignore 1
+#define R_SYNC_SERIAL3_CTRL__rec_enable__BITNR 22
+#define R_SYNC_SERIAL3_CTRL__rec_enable__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__rec_enable__disable 0
+#define R_SYNC_SERIAL3_CTRL__rec_enable__enable 1
+#define R_SYNC_SERIAL3_CTRL__f_synctype__BITNR 21
+#define R_SYNC_SERIAL3_CTRL__f_synctype__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__f_synctype__normal 0
+#define R_SYNC_SERIAL3_CTRL__f_synctype__early 1
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__BITNR 19
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__WIDTH 2
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__bit 0
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__word 1
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__extended 2
+#define R_SYNC_SERIAL3_CTRL__f_syncsize__reserved 3
+#define R_SYNC_SERIAL3_CTRL__f_sync__BITNR 18
+#define R_SYNC_SERIAL3_CTRL__f_sync__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__f_sync__on 0
+#define R_SYNC_SERIAL3_CTRL__f_sync__off 1
+#define R_SYNC_SERIAL3_CTRL__clk_mode__BITNR 17
+#define R_SYNC_SERIAL3_CTRL__clk_mode__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__clk_mode__normal 0
+#define R_SYNC_SERIAL3_CTRL__clk_mode__gated 1
+#define R_SYNC_SERIAL3_CTRL__clk_halt__BITNR 16
+#define R_SYNC_SERIAL3_CTRL__clk_halt__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__clk_halt__running 0
+#define R_SYNC_SERIAL3_CTRL__clk_halt__stopped 1
+#define R_SYNC_SERIAL3_CTRL__bitorder__BITNR 15
+#define R_SYNC_SERIAL3_CTRL__bitorder__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__bitorder__lsb 0
+#define R_SYNC_SERIAL3_CTRL__bitorder__msb 1
+#define R_SYNC_SERIAL3_CTRL__tr_enable__BITNR 14
+#define R_SYNC_SERIAL3_CTRL__tr_enable__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__tr_enable__disable 0
+#define R_SYNC_SERIAL3_CTRL__tr_enable__enable 1
+#define R_SYNC_SERIAL3_CTRL__wordsize__BITNR 11
+#define R_SYNC_SERIAL3_CTRL__wordsize__WIDTH 3
+#define R_SYNC_SERIAL3_CTRL__wordsize__size8bit 0
+#define R_SYNC_SERIAL3_CTRL__wordsize__size12bit 1
+#define R_SYNC_SERIAL3_CTRL__wordsize__size16bit 2
+#define R_SYNC_SERIAL3_CTRL__wordsize__size24bit 3
+#define R_SYNC_SERIAL3_CTRL__wordsize__size32bit 4
+#define R_SYNC_SERIAL3_CTRL__buf_empty__BITNR 10
+#define R_SYNC_SERIAL3_CTRL__buf_empty__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_8 0
+#define R_SYNC_SERIAL3_CTRL__buf_empty__lmt_0 1
+#define R_SYNC_SERIAL3_CTRL__buf_full__BITNR 9
+#define R_SYNC_SERIAL3_CTRL__buf_full__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_32 0
+#define R_SYNC_SERIAL3_CTRL__buf_full__lmt_8 1
+#define R_SYNC_SERIAL3_CTRL__flow_ctrl__BITNR 8
+#define R_SYNC_SERIAL3_CTRL__flow_ctrl__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__flow_ctrl__disabled 0
+#define R_SYNC_SERIAL3_CTRL__flow_ctrl__enabled 1
+#define R_SYNC_SERIAL3_CTRL__clk_polarity__BITNR 6
+#define R_SYNC_SERIAL3_CTRL__clk_polarity__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__clk_polarity__pos 0
+#define R_SYNC_SERIAL3_CTRL__clk_polarity__neg 1
+#define R_SYNC_SERIAL3_CTRL__frame_polarity__BITNR 5
+#define R_SYNC_SERIAL3_CTRL__frame_polarity__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__frame_polarity__normal 0
+#define R_SYNC_SERIAL3_CTRL__frame_polarity__inverted 1
+#define R_SYNC_SERIAL3_CTRL__status_polarity__BITNR 4
+#define R_SYNC_SERIAL3_CTRL__status_polarity__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__status_polarity__normal 0
+#define R_SYNC_SERIAL3_CTRL__status_polarity__inverted 1
+#define R_SYNC_SERIAL3_CTRL__clk_driver__BITNR 3
+#define R_SYNC_SERIAL3_CTRL__clk_driver__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__clk_driver__normal 0
+#define R_SYNC_SERIAL3_CTRL__clk_driver__inverted 1
+#define R_SYNC_SERIAL3_CTRL__frame_driver__BITNR 2
+#define R_SYNC_SERIAL3_CTRL__frame_driver__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__frame_driver__normal 0
+#define R_SYNC_SERIAL3_CTRL__frame_driver__inverted 1
+#define R_SYNC_SERIAL3_CTRL__status_driver__BITNR 1
+#define R_SYNC_SERIAL3_CTRL__status_driver__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__status_driver__normal 0
+#define R_SYNC_SERIAL3_CTRL__status_driver__inverted 1
+#define R_SYNC_SERIAL3_CTRL__def_out0__BITNR 0
+#define R_SYNC_SERIAL3_CTRL__def_out0__WIDTH 1
+#define R_SYNC_SERIAL3_CTRL__def_out0__high 1
+#define R_SYNC_SERIAL3_CTRL__def_out0__low 0
+
diff --git a/include/asm-cris/arch-v10/sv_addr_ag.h b/include/asm-cris/arch-v10/sv_addr_ag.h
new file mode 100644
index 000000000000..e4a6b68b8982
--- /dev/null
+++ b/include/asm-cris/arch-v10/sv_addr_ag.h
@@ -0,0 +1,139 @@
+/*!**************************************************************************
+*!                                                            
+*! MACROS:
+*!   IO_MASK(reg,field)
+*!   IO_STATE(reg,field,state)
+*!   IO_EXTRACT(reg,field,val)
+*!   IO_STATE_VALUE(reg,field,state)
+*!   IO_BITNR(reg,field)
+*!   IO_WIDTH(reg,field)
+*!   IO_FIELD(reg,field,val)
+*!   IO_RD(reg)
+*!   All moderegister addresses and fields of these.
+*!
+*!**************************************************************************/
+
+#ifndef __sv_addr_ag_h__
+#define __sv_addr_ag_h__
+
+
+#define __test_sv_addr__ 0
+
+/*------------------------------------------------------------
+!* General macros to manipulate moderegisters.
+!*-----------------------------------------------------------*/
+
+/* IO_MASK returns a mask for a specified bitfield in a register.
+   Note that this macro doesn't work when field width is 32 bits. */
+#define IO_MASK(reg, field) IO_MASK_ (reg##_, field##_)
+#define IO_MASK_(reg_, field_) \
+    ( ( ( 1 << reg_##_##field_##_WIDTH ) - 1 ) << reg_##_##field_##_BITNR )
+
+/* IO_STATE returns a constant corresponding to a one of the symbolic
+   states that the bitfield can have. (Shifted to correct position)  */
+#define IO_STATE(reg, field, state) IO_STATE_ (reg##_, field##_, _##state)
+#define IO_STATE_(reg_, field_, _state) \
+    ( reg_##_##field_##_state << reg_##_##field_##_BITNR )
+
+/* IO_EXTRACT returns the masked and shifted value corresponding to the
+   bitfield can have. */
+#define IO_EXTRACT(reg, field, val) IO_EXTRACT_ (reg##_, field##_, val)
+#define IO_EXTRACT_(reg_, field_, val) ( (( ( ( 1 << reg_##_##field_##_WIDTH ) \
+     - 1 ) << reg_##_##field_##_BITNR ) & (val)) >> reg_##_##field_##_BITNR )
+
+/* IO_STATE_VALUE returns a constant corresponding to a one of the symbolic
+   states that the bitfield can have. (Not shifted)  */
+#define IO_STATE_VALUE(reg, field, state) \
+    IO_STATE_VALUE_ (reg##_, field##_, _##state)
+#define IO_STATE_VALUE_(reg_, field_, _state) ( reg_##_##field_##_state )
+
+/* IO_FIELD shifts the val parameter to be aligned with the bitfield
+   specified. */
+#define IO_FIELD(reg, field, val) IO_FIELD_ (reg##_, field##_, val)
+#define IO_FIELD_(reg_, field_, val) ((val) << reg_##_##field_##_BITNR)
+
+/* IO_BITNR returns the starting bitnumber of a bitfield. Bit 0 is
+   LSB and the returned bitnumber is LSB of the field. */
+#define IO_BITNR(reg, field) IO_BITNR_ (reg##_, field##_)
+#define IO_BITNR_(reg_, field_) (reg_##_##field_##_BITNR)
+
+/* IO_WIDTH returns the width, in bits, of a bitfield. */
+#define IO_WIDTH(reg, field) IO_WIDTH_ (reg##_, field##_)
+#define IO_WIDTH_(reg_, field_) (reg_##_##field_##_WIDTH)
+
+/*--- Obsolete. Kept for backw compatibility. ---*/
+/* Reads (or writes) a byte/uword/udword from the specified mode
+   register. */
+#define IO_RD(reg) (*(volatile u32*)(reg))
+#define IO_RD_B(reg) (*(volatile u8*)(reg))
+#define IO_RD_W(reg) (*(volatile u16*)(reg))
+#define IO_RD_D(reg) (*(volatile u32*)(reg))
+
+/*------------------------------------------------------------
+!* Start addresses of the different memory areas.
+!*-----------------------------------------------------------*/
+
+#define MEM_CSE0_START (0x00000000)
+#define MEM_CSE0_SIZE (0x04000000)
+#define MEM_CSE1_START (0x04000000)
+#define MEM_CSE1_SIZE (0x04000000)
+#define MEM_CSR0_START (0x08000000)
+#define MEM_CSR1_START (0x0c000000)
+#define MEM_CSP0_START (0x10000000)
+#define MEM_CSP1_START (0x14000000)
+#define MEM_CSP2_START (0x18000000)
+#define MEM_CSP3_START (0x1c000000)
+#define MEM_CSP4_START (0x20000000)
+#define MEM_CSP5_START (0x24000000)
+#define MEM_CSP6_START (0x28000000)
+#define MEM_CSP7_START (0x2c000000)
+#define MEM_DRAM_START (0x40000000)
+
+#define MEM_NON_CACHEABLE (0x80000000)
+
+/*------------------------------------------------------------
+!* Type casts used in mode register macros, making pointer
+!* dereferencing possible. Empty in assembler.
+!*-----------------------------------------------------------*/
+
+#ifndef __ASSEMBLER__
+# define  IO_TYPECAST_UDWORD  (volatile u32*)
+# define  IO_TYPECAST_RO_UDWORD  (const volatile u32*)
+# define  IO_TYPECAST_UWORD  (volatile u16*)
+# define  IO_TYPECAST_RO_UWORD  (const volatile u16*)
+# define  IO_TYPECAST_BYTE  (volatile u8*)
+# define  IO_TYPECAST_RO_BYTE  (const volatile u8*)
+#else
+# define  IO_TYPECAST_UDWORD
+# define  IO_TYPECAST_RO_UDWORD
+# define  IO_TYPECAST_UWORD
+# define  IO_TYPECAST_RO_UWORD
+# define  IO_TYPECAST_BYTE
+# define  IO_TYPECAST_RO_BYTE
+#endif
+
+/*------------------------------------------------------------*/
+
+#include "sv_addr.agh"
+
+#if __test_sv_addr__
+/* IO_MASK( R_BUS_CONFIG , CE ) */
+IO_MASK( R_WAITSTATES , SRAM_WS )
+IO_MASK( R_TEST , W32 )
+
+IO_STATE( R_BUS_CONFIG, CE, DISABLE )
+IO_STATE( R_BUS_CONFIG, CE, ENABLE )
+
+IO_STATE( R_DRAM_TIMING, REF, IVAL2 )
+
+IO_MASK( R_DRAM_TIMING, REF )
+
+IO_MASK( R_EXT_DMA_0_STAT, TFR_COUNT ) >> IO_BITNR( R_EXT_DMA_0_STAT, TFR_COUNT )
+
+IO_RD(R_EXT_DMA_0_STAT) & IO_MASK( R_EXT_DMA_0_STAT, S ) 
+   == IO_STATE( R_EXT_DMA_0_STAT, S, STARTED )
+#endif
+
+
+#endif  /* ifndef __sv_addr_ag_h__ */
+
diff --git a/include/asm-cris/arch-v10/svinto.h b/include/asm-cris/arch-v10/svinto.h
new file mode 100644
index 000000000000..0881a1af7cee
--- /dev/null
+++ b/include/asm-cris/arch-v10/svinto.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_CRIS_SVINTO_H
+#define _ASM_CRIS_SVINTO_H
+
+#include "sv_addr_ag.h"
+
+extern unsigned int genconfig_shadow; /* defined and set in head.S */
+
+/* dma stuff */
+
+enum {                          /* Available in:  */
+	d_eol      = (1 << 0),  /* flags          */
+	d_eop      = (1 << 1),  /* flags & status */
+	d_wait     = (1 << 2),  /* flags          */
+	d_int      = (1 << 3),  /* flags          */
+	d_txerr    = (1 << 4),  /* flags          */
+	d_stop     = (1 << 4),  /*         status */
+	d_ecp      = (1 << 4),  /* flags & status */
+	d_pri      = (1 << 5),  /* flags & status */
+	d_alignerr = (1 << 6),  /*         status */
+	d_crcerr   = (1 << 7)   /*         status */
+};
+
+/* Do remember that DMA does not go through the MMU and needs
+ * a real physical address, not an address virtually mapped or
+ * paged. Therefore the buf/next ptrs below are unsigned long instead
+ * of void * to give a warning if you try to put a pointer directly
+ * to them instead of going through virt_to_phys/phys_to_virt.
+ */
+
+typedef struct etrax_dma_descr {
+	unsigned short sw_len;                /* 0-1 */
+	unsigned short ctrl;                  /* 2-3 */
+	unsigned long  next;                  /* 4-7 */
+	unsigned long  buf;                   /* 8-11 */
+	unsigned short hw_len;                /* 12-13 */
+	unsigned char  status;                /* 14 */
+	unsigned char  fifo_len;              /* 15 */
+} etrax_dma_descr;
+
+
+/* Use this for constant numbers only */
+#define RESET_DMA_NUM( n ) \
+  *R_DMA_CH##n##_CMD = IO_STATE( R_DMA_CH0_CMD, cmd, reset )
+
+/* Use this for constant numbers or symbols, 
+ * having two macros makes it possible to use constant expressions. 
+ */
+#define RESET_DMA( n ) RESET_DMA_NUM( n )
+
+
+/* Use this for constant numbers only */
+#define WAIT_DMA_NUM( n ) \
+  while( (*R_DMA_CH##n##_CMD & IO_MASK( R_DMA_CH0_CMD, cmd )) != \
+         IO_STATE( R_DMA_CH0_CMD, cmd, hold ) )
+
+/* Use this for constant numbers or symbols 
+ * having two macros makes it possible to use constant expressions. 
+ */
+#define WAIT_DMA( n ) WAIT_DMA_NUM( n )
+
+extern void prepare_rx_descriptor(struct etrax_dma_descr *desc);
+extern void flush_etrax_cache(void);
+
+#endif
diff --git a/include/asm-cris/arch-v10/system.h b/include/asm-cris/arch-v10/system.h
new file mode 100644
index 000000000000..781ca30229a8
--- /dev/null
+++ b/include/asm-cris/arch-v10/system.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_CRIS_ARCH_SYSTEM_H
+#define __ASM_CRIS_ARCH_SYSTEM_H
+
+#include <linux/config.h>
+
+/* read the CPU version register */
+
+extern inline unsigned long rdvr(void) { 
+	unsigned char vr;
+	__asm__ volatile ("move $vr,%0" : "=rm" (vr));
+	return vr;
+}
+
+/* read/write the user-mode stackpointer */
+
+extern inline unsigned long rdusp(void) {
+	unsigned long usp;
+	__asm__ __volatile__("move $usp,%0" : "=rm" (usp));
+	return usp;
+}
+
+#define wrusp(usp) \
+	__asm__ __volatile__("move %0,$usp" : /* no outputs */ : "rm" (usp))
+
+/* read the current stackpointer */
+
+extern inline unsigned long rdsp(void) {
+	unsigned long sp;
+	__asm__ __volatile__("move.d $sp,%0" : "=rm" (sp));
+	return sp;
+}
+
+extern inline unsigned long _get_base(char * addr)
+{
+  return 0;
+}
+
+#define nop() __asm__ __volatile__ ("nop");
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+/* interrupt control.. */
+#define local_save_flags(x)	__asm__ __volatile__ ("move $ccr,%0" : "=rm" (x) : : "memory");
+#define local_irq_restore(x) 	__asm__ __volatile__ ("move %0,$ccr" : : "rm" (x) : "memory");
+#define local_irq_disable() 	__asm__ __volatile__ ( "di" : : :"memory");
+#define local_irq_enable()	__asm__ __volatile__ ( "ei" : : :"memory");
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	!(flags & (1<<5));		\
+})
+
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ ("move $ccr,%0\n\tdi" : "=rm" (x) : : "memory");
+
+#endif
diff --git a/include/asm-cris/arch-v10/thread_info.h b/include/asm-cris/arch-v10/thread_info.h
new file mode 100644
index 000000000000..357f5df0c907
--- /dev/null
+++ b/include/asm-cris/arch-v10/thread_info.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_ARCH_THREAD_INFO_H
+#define _ASM_ARCH_THREAD_INFO_H
+
+/* how to get the thread information struct from C */
+extern inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+        __asm__("and.d $sp,%0; ":"=r" (ti) : "0" (~8191UL));
+        return ti;
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/timex.h b/include/asm-cris/arch-v10/timex.h
new file mode 100644
index 000000000000..ecfc553c06a5
--- /dev/null
+++ b/include/asm-cris/arch-v10/timex.h
@@ -0,0 +1,30 @@
+/*
+ * Use prescale timer at 25000 Hz instead of the baudrate timer at 
+ * 19200 to get rid of the 64ppm to fast timer (and we get better 
+ * resolution within a jiffie as well. 
+ */
+#ifndef _ASM_CRIS_ARCH_TIMEX_H
+#define _ASM_CRIS_ARCH_TIMEX_H
+
+/* The prescaler clock runs at 25MHz, we divide it by 1000 in the prescaler */
+/* If you change anything here you must check time.c as well... */
+#define PRESCALE_FREQ 25000000
+#define PRESCALE_VALUE 1000
+#define CLOCK_TICK_RATE 25000 /* Underlying frequency of the HZ timer */
+/* The timer0 values gives 40us resolution (1/25000) but interrupts at HZ*/
+#define TIMER0_FREQ (CLOCK_TICK_RATE)
+#define TIMER0_CLKSEL flexible
+#define TIMER0_DIV (TIMER0_FREQ/(HZ))
+
+
+#define GET_JIFFIES_USEC() \
+  ( (TIMER0_DIV - *R_TIMER0_DATA) * (1000000/HZ)/TIMER0_DIV )
+
+unsigned long get_ns_in_jiffie(void);
+
+extern inline unsigned long get_us_in_jiffie_highres(void)
+{
+	return get_ns_in_jiffie()/1000;
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/tlb.h b/include/asm-cris/arch-v10/tlb.h
new file mode 100644
index 000000000000..31525bbe75c3
--- /dev/null
+++ b/include/asm-cris/arch-v10/tlb.h
@@ -0,0 +1,13 @@
+#ifndef _CRIS_ARCH_TLB_H
+#define _CRIS_ARCH_TLB_H
+
+/* The TLB can host up to 64 different mm contexts at the same time.
+ * The last page_id is never running - it is used as an invalid page_id
+ * so we can make TLB entries that will never match. 
+ */
+#define NUM_TLB_ENTRIES 64
+#define NUM_PAGEID 64
+#define INVALID_PAGEID 63
+#define NO_CONTEXT -1
+
+#endif
diff --git a/include/asm-cris/arch-v10/uaccess.h b/include/asm-cris/arch-v10/uaccess.h
new file mode 100644
index 000000000000..787d2e60c83c
--- /dev/null
+++ b/include/asm-cris/arch-v10/uaccess.h
@@ -0,0 +1,660 @@
+/* 
+ * Authors:    Bjorn Wesen (bjornw@axis.com)
+ *	       Hans-Peter Nilsson (hp@axis.com)
+ *
+ */
+#ifndef _CRIS_ARCH_UACCESS_H
+#define _CRIS_ARCH_UACCESS_H
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ *
+ * Note that PC at a fault is the address *after* the faulting
+ * instruction.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"	"op" %1,[%2]\n"				\
+		"2:\n"						\
+		"	.section .fixup,\"ax\"\n"		\
+		"3:	move.d %3,%0\n"				\
+		"	jump 2b\n"				\
+		"	.previous\n"				\
+		"	.section __ex_table,\"a\"\n"		\
+		"	.dword 2b,3b\n"				\
+		"	.previous\n"				\
+		: "=r" (err)					\
+		: "r" (x), "r" (addr), "g" (-EFAULT), "0" (err))
+
+#define __put_user_asm_64(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"	move.d %M1,[%2]\n"			\
+		"2:	move.d %H1,[%2+4]\n"			\
+		"4:\n"						\
+		"	.section .fixup,\"ax\"\n"		\
+		"3:	move.d %3,%0\n"				\
+		"	jump 4b\n"				\
+		"	.previous\n"				\
+		"	.section __ex_table,\"a\"\n"		\
+		"	.dword 2b,3b\n"				\
+		"	.dword 4b,3b\n"				\
+		"	.previous\n"				\
+		: "=r" (err)					\
+		: "r" (x), "r" (addr), "g" (-EFAULT), "0" (err))
+
+/* See comment before __put_user_asm.  */
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"	"op" [%2],%1\n"			\
+		"2:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+		"3:	move.d %3,%0\n"			\
+		"	moveq 0,%1\n"			\
+		"	jump 2b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+		"	.dword 2b,3b\n"			\
+		"	.previous\n"			\
+		: "=r" (err), "=r" (x)			\
+		: "r" (addr), "g" (-EFAULT), "0" (err))
+
+#define __get_user_asm_64(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"	move.d [%2],%M1\n"		\
+		"2:	move.d [%2+4],%H1\n"		\
+		"4:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+		"3:	move.d %3,%0\n"			\
+		"	moveq 0,%1\n"			\
+		"	jump 4b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+		"	.dword 2b,3b\n"			\
+		"	.dword 4b,3b\n"			\
+		"	.previous\n"			\
+		: "=r" (err), "=r" (x)			\
+		: "r" (addr), "g" (-EFAULT), "0" (err))
+
+/*
+ * Copy a null terminated string from userspace.
+ *
+ * Must return:
+ * -EFAULT		for an exception
+ * count		if we hit the buffer limit
+ * bytes copied		if we hit a null byte
+ * (without the null byte)
+ */
+extern inline long         
+__do_strncpy_from_user(char *dst, const char *src, long count)
+{
+	long res;
+
+	if (count == 0)
+		return 0;
+
+	/*
+	 * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop.
+	 *  So do we.
+	 *
+	 *  This code is deduced from:
+	 *
+	 *	char tmp2;
+	 *	long tmp1, tmp3	
+	 *	tmp1 = count;
+	 *	while ((*dst++ = (tmp2 = *src++)) != 0
+	 *	       && --tmp1)
+	 *	  ;
+	 *
+	 *	res = count - tmp1;
+	 *
+	 *  with tweaks.
+	 */
+
+	__asm__ __volatile__ (
+		"	move.d %3,%0\n"
+		"	move.b [%2+],$r9\n"
+		"1:	beq 2f\n"
+		"	move.b $r9,[%1+]\n"
+
+		"	subq 1,%0\n"
+		"	bne 1b\n"
+		"	move.b [%2+],$r9\n"
+
+		"2:	sub.d %3,%0\n"
+		"	neg.d %0,%0\n"
+		"3:\n"
+		"	.section .fixup,\"ax\"\n"
+		"4:	move.d %7,%0\n"
+		"	jump 3b\n"
+
+		/* There's one address for a fault at the first move, and
+		   two possible PC values for a fault at the second move,
+		   being a delay-slot filler.  However, the branch-target
+		   for the second move is the same as the first address.
+		   Just so you don't get confused...  */
+		"	.previous\n"
+		"	.section __ex_table,\"a\"\n"
+		"	.dword 1b,4b\n"
+		"	.dword 2b,4b\n"
+		"	.previous"
+		: "=r" (res), "=r" (dst), "=r" (src), "=r" (count)
+		: "3" (count), "1" (dst), "2" (src), "g" (-EFAULT)
+		: "r9");
+
+	return res;
+}
+
+/* A few copy asms to build up the more complex ones from.
+
+   Note again, a post-increment is performed regardless of whether a bus
+   fault occurred in that instruction, and PC for a faulted insn is the
+   address *after* the insn.  */
+
+#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm__ __volatile__ (				\
+			COPY				\
+		"1:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+			FIXUP				\
+		"	jump 1b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+			TENTRY				\
+		"	.previous\n"			\
+		: "=r" (to), "=r" (from), "=r" (ret)	\
+		: "0" (to), "1" (from), "2" (ret)	\
+		: "r9", "memory")
+
+#define __asm_copy_from_user_1(to, from, ret) \
+	__asm_copy_user_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"	\
+		"2:	move.b $r9,[%0+]\n",	\
+		"3:	addq 1,%2\n"		\
+		"	clear.b [%0+]\n",	\
+		"	.dword 2b,3b\n")
+
+#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_user_cont(to, from, ret,		\
+		"	move.w [%1+],$r9\n"		\
+		"2:	move.w $r9,[%0+]\n" COPY,	\
+		"3:	addq 2,%2\n"			\
+		"	clear.w [%0+]\n" FIXUP,		\
+		"	.dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_2(to, from, ret) \
+	__asm_copy_from_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_3(to, from, ret)		\
+	__asm_copy_from_user_2x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"4:	move.b $r9,[%0+]\n",		\
+		"5:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 4b,5b\n")
+
+#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_user_cont(to, from, ret,		\
+		"	move.d [%1+],$r9\n"		\
+		"2:	move.d $r9,[%0+]\n" COPY,	\
+		"3:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_4(to, from, ret) \
+	__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_5(to, from, ret) \
+	__asm_copy_from_user_4x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"4:	move.b $r9,[%0+]\n",		\
+		"5:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 4b,5b\n")
+
+#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_4x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"4:	move.w $r9,[%0+]\n" COPY,	\
+		"5:	addq 2,%2\n"			\
+		"	clear.w [%0+]\n" FIXUP,		\
+		"	.dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_6(to, from, ret) \
+	__asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_7(to, from, ret) \
+	__asm_copy_from_user_6x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"6:	move.b $r9,[%0+]\n",		\
+		"7:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 6b,7b\n")
+
+#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_4x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"4:	move.d $r9,[%0+]\n" COPY,	\
+		"5:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_8(to, from, ret) \
+	__asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_9(to, from, ret) \
+	__asm_copy_from_user_8x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"6:	move.b $r9,[%0+]\n",		\
+		"7:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 6b,7b\n")
+
+#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_8x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"6:	move.w $r9,[%0+]\n" COPY,	\
+		"7:	addq 2,%2\n"			\
+		"	clear.w [%0+]\n" FIXUP,		\
+		"	.dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_10(to, from, ret) \
+	__asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_11(to, from, ret)		\
+	__asm_copy_from_user_10x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"8:	move.b $r9,[%0+]\n",		\
+		"9:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 8b,9b\n")
+
+#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_8x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"6:	move.d $r9,[%0+]\n" COPY,	\
+		"7:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_12(to, from, ret) \
+	__asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_13(to, from, ret) \
+	__asm_copy_from_user_12x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"8:	move.b $r9,[%0+]\n",		\
+		"9:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 8b,9b\n")
+
+#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_12x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"8:	move.w $r9,[%0+]\n" COPY,	\
+		"9:	addq 2,%2\n"			\
+		"	clear.w [%0+]\n" FIXUP,		\
+		"	.dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_14(to, from, ret) \
+	__asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_15(to, from, ret) \
+	__asm_copy_from_user_14x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"10:	move.b $r9,[%0+]\n",		\
+		"11:	addq 1,%2\n"			\
+		"	clear.b [%0+]\n",		\
+		"	.dword 10b,11b\n")
+
+#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_12x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"8:	move.d $r9,[%0+]\n" COPY,	\
+		"9:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_16(to, from, ret) \
+	__asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_16x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"10:	move.d $r9,[%0+]\n" COPY,	\
+		"11:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_from_user_20(to, from, ret) \
+	__asm_copy_from_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_from_user_20x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"12:	move.d $r9,[%0+]\n" COPY,	\
+		"13:	addq 4,%2\n"			\
+		"	clear.d [%0+]\n" FIXUP,		\
+		"	.dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_from_user_24(to, from, ret) \
+	__asm_copy_from_user_24x_cont(to, from, ret, "", "", "")
+
+/* And now, the to-user ones.  */
+
+#define __asm_copy_to_user_1(to, from, ret)	\
+	__asm_copy_user_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"	\
+		"	move.b $r9,[%0+]\n2:\n",	\
+		"3:	addq 1,%2\n",		\
+		"	.dword 2b,3b\n")
+
+#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_user_cont(to, from, ret,		\
+		"	move.w [%1+],$r9\n"		\
+		"	move.w $r9,[%0+]\n2:\n" COPY,	\
+		"3:	addq 2,%2\n" FIXUP,		\
+		"	.dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_2(to, from, ret) \
+	__asm_copy_to_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_3(to, from, ret) \
+	__asm_copy_to_user_2x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n4:\n",		\
+		"5:	addq 1,%2\n",			\
+		"	.dword 4b,5b\n")
+
+#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_user_cont(to, from, ret,		\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n2:\n" COPY,	\
+		"3:	addq 4,%2\n" FIXUP,		\
+		"	.dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_4(to, from, ret) \
+	__asm_copy_to_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_5(to, from, ret) \
+	__asm_copy_to_user_4x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n4:\n",		\
+		"5:	addq 1,%2\n",			\
+		"	.dword 4b,5b\n")
+
+#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_4x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"	move.w $r9,[%0+]\n4:\n" COPY,	\
+		"5:	addq 2,%2\n" FIXUP,		\
+		"	.dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_6(to, from, ret) \
+	__asm_copy_to_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_7(to, from, ret) \
+	__asm_copy_to_user_6x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n6:\n",		\
+		"7:	addq 1,%2\n",			\
+		"	.dword 6b,7b\n")
+
+#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_4x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n4:\n" COPY,	\
+		"5:	addq 4,%2\n"  FIXUP,		\
+		"	.dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_8(to, from, ret) \
+	__asm_copy_to_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_9(to, from, ret) \
+	__asm_copy_to_user_8x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n6:\n",		\
+		"7:	addq 1,%2\n",			\
+		"	.dword 6b,7b\n")
+
+#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_8x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"	move.w $r9,[%0+]\n6:\n" COPY,	\
+		"7:	addq 2,%2\n" FIXUP,		\
+		"	.dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_10(to, from, ret) \
+	__asm_copy_to_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_11(to, from, ret) \
+	__asm_copy_to_user_10x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n8:\n",		\
+		"9:	addq 1,%2\n",			\
+		"	.dword 8b,9b\n")
+
+#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_8x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n6:\n" COPY,	\
+		"7:	addq 4,%2\n" FIXUP,		\
+		"	.dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_12(to, from, ret) \
+	__asm_copy_to_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_13(to, from, ret) \
+	__asm_copy_to_user_12x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n8:\n",		\
+		"9:	addq 1,%2\n",			\
+		"	.dword 8b,9b\n")
+
+#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_12x_cont(to, from, ret,	\
+		"	move.w [%1+],$r9\n"		\
+		"	move.w $r9,[%0+]\n8:\n" COPY,	\
+		"9:	addq 2,%2\n" FIXUP,		\
+		"	.dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_14(to, from, ret)	\
+	__asm_copy_to_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_15(to, from, ret) \
+	__asm_copy_to_user_14x_cont(to, from, ret,	\
+		"	move.b [%1+],$r9\n"		\
+		"	move.b $r9,[%0+]\n10:\n",		\
+		"11:	addq 1,%2\n",			\
+		"	.dword 10b,11b\n")
+
+#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_12x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n8:\n" COPY,	\
+		"9:	addq 4,%2\n" FIXUP,		\
+		"	.dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_16(to, from, ret) \
+	__asm_copy_to_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+	__asm_copy_to_user_16x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n10:\n" COPY,	\
+		"11:	addq 4,%2\n" FIXUP,		\
+		"	.dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_to_user_20(to, from, ret) \
+	__asm_copy_to_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY)	\
+	__asm_copy_to_user_20x_cont(to, from, ret,	\
+		"	move.d [%1+],$r9\n"		\
+		"	move.d $r9,[%0+]\n12:\n" COPY,	\
+		"13:	addq 4,%2\n" FIXUP,		\
+		"	.dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_to_user_24(to, from, ret)	\
+	__asm_copy_to_user_24x_cont(to, from, ret, "", "", "")
+
+/* Define a few clearing asms with exception handlers.  */
+
+/* This frame-asm is like the __asm_copy_user_cont one, but has one less
+   input.  */
+
+#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm__ __volatile__ (				\
+			CLEAR				\
+		"1:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+			FIXUP				\
+		"	jump 1b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+			TENTRY				\
+		"	.previous"			\
+		: "=r" (to), "=r" (ret)			\
+		: "0" (to), "1" (ret)			\
+		: "memory")
+
+#define __asm_clear_1(to, ret) \
+	__asm_clear(to, ret,			\
+		"	clear.b [%0+]\n2:\n",	\
+		"3:	addq 1,%1\n",		\
+		"	.dword 2b,3b\n")
+
+#define __asm_clear_2(to, ret) \
+	__asm_clear(to, ret,			\
+		"	clear.w [%0+]\n2:\n",	\
+		"3:	addq 2,%1\n",		\
+		"	.dword 2b,3b\n")
+
+#define __asm_clear_3(to, ret) \
+     __asm_clear(to, ret,			\
+		 "	clear.w [%0+]\n"	\
+		 "2:	clear.b [%0+]\n3:\n",	\
+		 "4:	addq 2,%1\n"		\
+		 "5:	addq 1,%1\n",		\
+		 "	.dword 2b,4b\n"		\
+		 "	.dword 3b,5b\n")
+
+#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear(to, ret,				\
+		"	clear.d [%0+]\n2:\n" CLEAR,	\
+		"3:	addq 4,%1\n" FIXUP,		\
+		"	.dword 2b,3b\n" TENTRY)
+
+#define __asm_clear_4(to, ret) \
+	__asm_clear_4x_cont(to, ret, "", "", "")
+
+#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear_4x_cont(to, ret,			\
+		"	clear.d [%0+]\n4:\n" CLEAR,	\
+		"5:	addq 4,%1\n" FIXUP,		\
+		"	.dword 4b,5b\n" TENTRY)
+
+#define __asm_clear_8(to, ret) \
+	__asm_clear_8x_cont(to, ret, "", "", "")
+
+#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear_8x_cont(to, ret,			\
+		"	clear.d [%0+]\n6:\n" CLEAR,	\
+		"7:	addq 4,%1\n" FIXUP,		\
+		"	.dword 6b,7b\n" TENTRY)
+
+#define __asm_clear_12(to, ret) \
+	__asm_clear_12x_cont(to, ret, "", "", "")
+
+#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear_12x_cont(to, ret,			\
+		"	clear.d [%0+]\n8:\n" CLEAR,	\
+		"9:	addq 4,%1\n" FIXUP,		\
+		"	.dword 8b,9b\n" TENTRY)
+
+#define __asm_clear_16(to, ret) \
+	__asm_clear_16x_cont(to, ret, "", "", "")
+
+#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear_16x_cont(to, ret,			\
+		"	clear.d [%0+]\n10:\n" CLEAR,	\
+		"11:	addq 4,%1\n" FIXUP,		\
+		"	.dword 10b,11b\n" TENTRY)
+
+#define __asm_clear_20(to, ret) \
+	__asm_clear_20x_cont(to, ret, "", "", "")
+
+#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+	__asm_clear_20x_cont(to, ret,			\
+		"	clear.d [%0+]\n12:\n" CLEAR,	\
+		"13:	addq 4,%1\n" FIXUP,		\
+		"	.dword 12b,13b\n" TENTRY)
+
+#define __asm_clear_24(to, ret) \
+	__asm_clear_24x_cont(to, ret, "", "", "")
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return length of string in userspace including terminating 0
+ * or 0 for error.  Return a value greater than N if too long.
+ */
+
+extern inline long
+strnlen_user(const char *s, long n)
+{
+	long res, tmp1;
+
+	if (!access_ok(VERIFY_READ, s, 0))
+		return 0;
+
+	/*
+	 * This code is deduced from:
+	 *
+	 *	tmp1 = n;
+	 *	while (tmp1-- > 0 && *s++)
+	 *	  ;
+	 *
+	 *	res = n - tmp1;
+	 *
+	 *  (with tweaks).
+	 */
+
+	__asm__ __volatile__ (
+		"	move.d %1,$r9\n"
+		"0:\n"
+		"	ble 1f\n"
+		"	subq 1,$r9\n"
+
+		"	test.b [%0+]\n"
+		"	bne 0b\n"
+		"	test.d $r9\n"
+		"1:\n"
+		"	move.d %1,%0\n"
+		"	sub.d $r9,%0\n"
+		"2:\n"
+		"	.section .fixup,\"ax\"\n"
+
+		"3:	clear.d %0\n"
+		"	jump 2b\n"
+
+		/* There's one address for a fault at the first move, and
+		   two possible PC values for a fault at the second move,
+		   being a delay-slot filler.  However, the branch-target
+		   for the second move is the same as the first address.
+		   Just so you don't get confused...  */
+		"	.previous\n"
+		"	.section __ex_table,\"a\"\n"
+		"	.dword 0b,3b\n"
+		"	.dword 1b,3b\n"
+		"	.previous\n"
+		: "=r" (res), "=r" (tmp1)
+		: "0" (s), "1" (n)
+		: "r9");
+
+	return res;
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/unistd.h b/include/asm-cris/arch-v10/unistd.h
new file mode 100644
index 000000000000..d1a38b9e6264
--- /dev/null
+++ b/include/asm-cris/arch-v10/unistd.h
@@ -0,0 +1,148 @@
+#ifndef _ASM_CRIS_ARCH_UNISTD_H_
+#define _ASM_CRIS_ARCH_UNISTD_H_
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+/*
+ * Don't remove the .ifnc tests; they are an insurance against
+ * any hard-to-spot gcc register allocation bugs.
+ */
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+  register long __a __asm__ ("r10"); \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1,$r10$r9\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __b __asm__ ("r11") = (long) arg2; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1%3,$r10$r9$r11\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a), "r" (__b)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __b __asm__ ("r11") = (long) arg2; \
+  register long __c __asm__ ("r12") = (long) arg3; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1%3%4,$r10$r9$r11$r12\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __b __asm__ ("r11") = (long) arg2; \
+  register long __c __asm__ ("r12") = (long) arg3; \
+  register long __d __asm__ ("r13") = (long) arg4; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a), "r" (__b), \
+			  "r" (__c), "r" (__d)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __b __asm__ ("r11") = (long) arg2; \
+  register long __c __asm__ ("r12") = (long) arg3; \
+  register long __d __asm__ ("r13") = (long) arg4; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"move %6,$mof\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a), "r" (__b), \
+			  "r" (__c), "r" (__d), "g" (arg5)); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5,type6,arg6) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \
+{ \
+  register long __a __asm__ ("r10") = (long) arg1; \
+  register long __b __asm__ ("r11") = (long) arg2; \
+  register long __c __asm__ ("r12") = (long) arg3; \
+  register long __d __asm__ ("r13") = (long) arg4; \
+  register long __n_ __asm__ ("r9") = (__NR_##name); \
+  __asm__ __volatile__ (".ifnc %0%1%3%4%5,$r10$r9$r11$r12$r13\n\t" \
+			".err\n\t" \
+			".endif\n\t" \
+			"move %6,$mof\n\tmove %7,$srp\n\t" \
+			"break 13" \
+			: "=r" (__a) \
+			: "r" (__n_), "0" (__a), "r" (__b), \
+			  "r" (__c), "r" (__d), "g" (arg5), "g" (arg6)\
+			: "srp"); \
+  if (__a >= 0) \
+     return (type) __a; \
+  errno = -__a; \
+  return (type) -1; \
+}
+
+#endif
diff --git a/include/asm-cris/arch-v10/user.h b/include/asm-cris/arch-v10/user.h
new file mode 100644
index 000000000000..9303ea77c915
--- /dev/null
+++ b/include/asm-cris/arch-v10/user.h
@@ -0,0 +1,46 @@
+#ifndef __ASM_CRIS_ARCH_USER_H
+#define __ASM_CRIS_ARCH_USER_H
+
+/* User mode registers, used for core dumps. In order to keep ELF_NGREG
+   sensible we let all registers be 32 bits. The csr registers are included
+   for future use. */
+struct user_regs_struct {
+        unsigned long r0;       /* General registers. */
+        unsigned long r1;
+        unsigned long r2;
+        unsigned long r3;
+        unsigned long r4;
+        unsigned long r5;
+        unsigned long r6;
+        unsigned long r7;
+        unsigned long r8;
+        unsigned long r9;
+        unsigned long r10;
+        unsigned long r11;
+        unsigned long r12;
+        unsigned long r13;
+        unsigned long sp;       /* Stack pointer. */
+        unsigned long pc;       /* Program counter. */
+        unsigned long p0;       /* Constant zero (only 8 bits). */
+        unsigned long vr;       /* Version register (only 8 bits). */
+        unsigned long p2;       /* Reserved. */
+        unsigned long p3;       /* Reserved. */
+        unsigned long p4;       /* Constant zero (only 16 bits). */
+        unsigned long ccr;      /* Condition code register (only 16 bits). */
+        unsigned long p6;       /* Reserved. */
+        unsigned long mof;      /* Multiply overflow register. */
+        unsigned long p8;       /* Constant zero. */
+        unsigned long ibr;      /* Not accessible. */
+        unsigned long irp;      /* Not accessible. */
+        unsigned long srp;      /* Subroutine return pointer. */
+        unsigned long bar;      /* Not accessible. */
+        unsigned long dccr;     /* Dword condition code register. */
+        unsigned long brp;      /* Not accessible. */
+        unsigned long usp;      /* User-mode stack pointer. Same as sp when 
+                                   in user mode. */
+        unsigned long csrinstr; /* Internal status registers. */
+        unsigned long csraddr;
+        unsigned long csrdata;
+};
+
+#endif
diff --git a/include/asm-cris/atomic.h b/include/asm-cris/atomic.h
new file mode 100644
index 000000000000..b3dfea5a71e4
--- /dev/null
+++ b/include/asm-cris/atomic.h
@@ -0,0 +1,150 @@
+/* $Id: atomic.h,v 1.3 2001/07/25 16:15:19 bjornw Exp $ */
+
+#ifndef __ASM_CRIS_ATOMIC__
+#define __ASM_CRIS_ATOMIC__
+
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+
+#define __atomic_fool_gcc(x) (*(struct { int a[100]; } *)x)
+
+typedef struct { int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+/* These should be written in asm but we do it in C for now. */
+
+extern __inline__ void atomic_add(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	v->counter += i;
+	local_irq_restore(flags);
+}
+
+extern __inline__ void atomic_sub(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	v->counter -= i;
+	local_irq_restore(flags);
+}
+
+extern __inline__ int atomic_add_return(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (v->counter += i);
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+extern __inline__ int atomic_sub_return(int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (v->counter -= i);
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern __inline__ int atomic_sub_and_test(int i, volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (v->counter -= i) == 0;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern __inline__ void atomic_inc(volatile atomic_t *v)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	(v->counter)++;
+	local_irq_restore(flags);
+}
+
+extern __inline__ void atomic_dec(volatile atomic_t *v)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	(v->counter)--;
+	local_irq_restore(flags);
+}
+
+extern __inline__ int atomic_inc_return(volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (v->counter)++;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern __inline__ int atomic_dec_return(volatile atomic_t *v)
+{
+	unsigned long flags;
+	int retval;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (v->counter)--;
+	local_irq_restore(flags);
+	return retval;
+}
+extern __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = --(v->counter) == 0;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+	int retval;
+	unsigned long flags;
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = ++(v->counter) == 0;
+	local_irq_restore(flags);
+	return retval;
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec()     barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc()     barrier()
+
+#endif
diff --git a/include/asm-cris/axisflashmap.h b/include/asm-cris/axisflashmap.h
new file mode 100644
index 000000000000..600bb8715d89
--- /dev/null
+++ b/include/asm-cris/axisflashmap.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_AXISFLASHMAP_H
+#define __ASM_AXISFLASHMAP_H
+
+/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC 
+ * as start, it ends with 0xFFFFFFFF */
+#define FLASH_BOOT_MAGIC 0xbeefcace
+#define BOOTPARAM_OFFSET 0xc000
+/* apps/bootblocktool is used to read and write the parameters,
+ * and it has nothing to do with the partition table. 
+ */
+
+#define PARTITION_TABLE_OFFSET 10
+#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic */
+
+/* The partitiontable_head is located at offset +10: */
+struct partitiontable_head {
+	__u16 magic; /* PARTITION_TABLE_MAGIC */ 
+	__u16 size;  /* Length of ptable block (not header) */
+	__u32 checksum; /* simple longword sum */
+};
+
+/* And followed by partition table entries */
+struct partitiontable_entry {
+	__u32 offset;   /* Offset is relative to the sector the ptable is in */
+	__u32 size;
+	__u32 checksum; /* simple longword sum */
+	__u16 type;
+	__u16 flags;   /* bit 0: ro/rw = 1/0 */
+	__u32 future0; /* 16 bytes reserved for future use */
+	__u32 future1;
+	__u32 future2;
+	__u32 future3;
+};
+/* ended by an end marker: */
+#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF
+#define PARTITIONTABLE_END_MARKER_SIZE 4
+
+/*#define PARTITION_TYPE_RESCUE 0x0000?*/  /* Not used, maybe it should? */
+#define PARTITION_TYPE_PARAM  0x0001
+#define PARTITION_TYPE_KERNEL 0x0002
+#define PARTITION_TYPE_JFFS   0x0003
+
+#endif
diff --git a/include/asm-cris/bitops.h b/include/asm-cris/bitops.h
new file mode 100644
index 000000000000..d7861115d731
--- /dev/null
+++ b/include/asm-cris/bitops.h
@@ -0,0 +1,387 @@
+/* asm/bitops.h for Linux/CRIS
+ *
+ * TODO: asm versions if speed is needed
+ *
+ * All bit operations return 0 if the bit was cleared before the
+ * operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#ifndef _CRIS_BITOPS_H
+#define _CRIS_BITOPS_H
+
+/* Currently this is unsuitable for consumption outside the kernel.  */
+#ifdef __KERNEL__ 
+
+#include <asm/arch/bitops.h>
+#include <asm/system.h>
+#include <linux/compiler.h>
+
+/*
+ * Some hacks to defeat gcc over-optimizations..
+ */
+struct __dummy { unsigned long a[100]; };
+#define ADDR (*(struct __dummy *) addr)
+#define CONST_ADDR (*(const struct __dummy *) addr)
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+
+#define set_bit(nr, addr)    (void)test_and_set_bit(nr, addr)
+
+#define __set_bit(nr, addr)    (void)__test_and_set_bit(nr, addr)
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+
+#define clear_bit(nr, addr)  (void)test_and_clear_bit(nr, addr)
+
+#define __clear_bit(nr, addr)  (void)__test_and_clear_bit(nr, addr)
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+
+#define change_bit(nr, addr) (void)test_and_change_bit(nr, addr)
+
+/*
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+
+#define __change_bit(nr, addr) (void)__test_and_change_bit(nr, addr)
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+extern inline int test_and_set_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (mask & *adr) != 0;
+	*adr |= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern inline int __test_and_set_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *adr) != 0;
+	*adr |= mask;
+	return retval;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+extern inline int test_and_clear_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (mask & *adr) != 0;
+	*adr &= ~mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+
+extern inline int __test_and_clear_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *adr) != 0;
+	*adr &= ~mask;
+	return retval;
+}
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+
+extern inline int test_and_change_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned long flags;
+	unsigned int *adr = (unsigned int *)addr;
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_save_flags(flags);
+	local_irq_disable();
+	retval = (mask & *adr) != 0;
+	*adr ^= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+
+extern inline int __test_and_change_bit(int nr, void *addr)
+{
+	unsigned int mask, retval;
+	unsigned int *adr = (unsigned int *)addr;
+
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *adr) != 0;
+	*adr ^= mask;
+
+	return retval;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ *
+ * This routine doesn't need to be atomic.
+ */
+
+extern inline int test_bit(int nr, const void *addr)
+{
+	unsigned int mask;
+	unsigned int *adr = (unsigned int *)addr;
+	
+	adr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *adr) != 0);
+}
+
+/*
+ * Find-bit routines..
+ */
+
+/*
+ * Since we define it "external", it collides with the built-in
+ * definition, which doesn't have the same semantics.  We don't want to
+ * use -fno-builtin, so just hide the name ffs.
+ */
+#define ffs kernel_ffs
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+/*
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+extern inline int find_next_zero_bit (void * addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+	
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+	
+ found_first:
+	tmp |= ~0UL >> size;
+ found_middle:
+	return result + ffz(tmp);
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ int find_next_bit(void *addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+        unsigned long result = offset & ~31UL;
+        unsigned long tmp;
+
+        if (offset >= size)
+                return size;
+        size -= result;
+        offset &= 31UL;
+        if (offset) {
+                tmp = *(p++);
+                tmp &= (~0UL << offset);
+                if (size < 32)
+                        goto found_first;
+                if (tmp)
+                        goto found_middle;
+                size -= 32;
+                result += 32;
+        }
+        while (size & ~31UL) {
+                if ((tmp = *(p++)))
+                        goto found_middle;
+                result += 32;
+                size -= 32;
+        }
+        if (!size)
+                return result;
+        tmp = *p;
+
+found_first:
+        tmp &= (~0UL >> (32 - size));
+        if (tmp == 0UL)        /* Are any bits set? */
+                return result + size; /* Nope. */
+found_middle:
+        return result + __ffs(tmp);
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+#define find_first_bit(addr, size) \
+        find_next_bit((addr), (size), 0)
+
+#define ext2_set_bit                 test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)   test_and_set_bit(n,a)
+#define ext2_clear_bit               test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
+#define ext2_test_bit                test_bit
+#define ext2_find_first_zero_bit     find_first_zero_bit
+#define ext2_find_next_zero_bit      find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+extern inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (unlikely(b[3]))
+		return __ffs(b[3]) + 96;
+	if (b[4])
+		return __ffs(b[4]) + 128;
+	return __ffs(b[5]) + 32 + 128;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_BITOPS_H */
diff --git a/include/asm-cris/bug.h b/include/asm-cris/bug.h
new file mode 100644
index 000000000000..8dd6b23c15d6
--- /dev/null
+++ b/include/asm-cris/bug.h
@@ -0,0 +1,4 @@
+#ifndef _CRIS_BUG_H
+#define _CRIS_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-cris/bugs.h b/include/asm-cris/bugs.h
new file mode 100644
index 000000000000..c5907aac1007
--- /dev/null
+++ b/include/asm-cris/bugs.h
@@ -0,0 +1,21 @@
+/* $Id: bugs.h,v 1.2 2001/01/17 17:03:18 bjornw Exp $
+ *
+ *  include/asm-cris/bugs.h
+ *
+ *  Copyright (C) 2001 Axis Communications AB
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
+
+
+
+
diff --git a/include/asm-cris/byteorder.h b/include/asm-cris/byteorder.h
new file mode 100644
index 000000000000..a1a222adaa9f
--- /dev/null
+++ b/include/asm-cris/byteorder.h
@@ -0,0 +1,26 @@
+#ifndef _CRIS_BYTEORDER_H
+#define _CRIS_BYTEORDER_H
+
+#ifdef __GNUC__
+
+#include <asm/arch/byteorder.h>
+
+/* defines are necessary because the other files detect the presence
+ * of a defined __arch_swab32, not an inline
+ */
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
+
diff --git a/include/asm-cris/cache.h b/include/asm-cris/cache.h
new file mode 100644
index 000000000000..46a3b26e205a
--- /dev/null
+++ b/include/asm-cris/cache.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/arch/cache.h>
+
+#endif /* _ASM_CACHE_H */
diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h
new file mode 100644
index 000000000000..72cc71dffe70
--- /dev/null
+++ b/include/asm-cris/cacheflush.h
@@ -0,0 +1,31 @@
+#ifndef _CRIS_CACHEFLUSH_H
+#define _CRIS_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* The cache doesn't need to be flushed when TLB entries change because 
+ * the cache is mapped to physical memory, not virtual memory
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+void global_flush_tlb(void); 
+int change_page_attr(struct page *page, int numpages, pgprot_t prot);
+
+#endif /* _CRIS_CACHEFLUSH_H */
diff --git a/include/asm-cris/checksum.h b/include/asm-cris/checksum.h
new file mode 100644
index 000000000000..15ca8aec5c63
--- /dev/null
+++ b/include/asm-cris/checksum.h
@@ -0,0 +1,87 @@
+/* TODO: csum_tcpudp_magic could be speeded up, and csum_fold as well */
+
+#ifndef _CRIS_CHECKSUM_H
+#define _CRIS_CHECKSUM_H
+
+#include <asm/arch/checksum.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int csum_partial_copy_nocheck(const char *src, char *dst,
+				       int len, unsigned int sum);
+
+/*
+ *	Fold a partial checksum into a word
+ */
+
+extern inline unsigned int csum_fold(unsigned int sum)
+{
+	/* the while loop is unnecessary really, it's always enough with two
+	   iterations */
+	
+	while(sum >> 16)
+		sum = (sum & 0xffff) + (sum >> 16); /* add in end-around carry */
+	
+	return ~sum;
+}
+
+extern unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+						int len, unsigned int sum, 
+						int *errptr);
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+
+extern inline unsigned short ip_fast_csum(unsigned char * iph,
+					  unsigned int ihl)
+{
+	return csum_fold(csum_partial(iph, ihl * 4, 0));
+}
+ 
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+extern inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern inline unsigned short ip_compute_csum(unsigned char * buff, int len) {
+	return csum_fold (csum_partial(buff, len, 0));
+}
+
+#endif
diff --git a/include/asm-cris/cputime.h b/include/asm-cris/cputime.h
new file mode 100644
index 000000000000..4446a65656fa
--- /dev/null
+++ b/include/asm-cris/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __CRIS_CPUTIME_H
+#define __CRIS_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __CRIS_CPUTIME_H */
diff --git a/include/asm-cris/current.h b/include/asm-cris/current.h
new file mode 100644
index 000000000000..dce69c99da39
--- /dev/null
+++ b/include/asm-cris/current.h
@@ -0,0 +1,15 @@
+#ifndef _CRIS_CURRENT_H
+#define _CRIS_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+extern inline struct task_struct * get_current(void)
+{
+        return current_thread_info()->task;
+}
+ 
+#define current get_current()
+
+#endif /* !(_CRIS_CURRENT_H) */
diff --git a/include/asm-cris/delay.h b/include/asm-cris/delay.h
new file mode 100644
index 000000000000..efc41aad4845
--- /dev/null
+++ b/include/asm-cris/delay.h
@@ -0,0 +1,24 @@
+#ifndef _CRIS_DELAY_H
+#define _CRIS_DELAY_H
+
+/*
+ * Copyright (C) 1998-2002 Axis Communications AB
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+#include <asm/arch/delay.h>
+
+/* Use only for very small delays ( < 1 msec).  */
+
+extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */
+
+extern __inline__ void udelay(unsigned long usecs)
+{
+	__delay(usecs * loops_per_usec);
+}
+
+#endif /* defined(_CRIS_DELAY_H) */
+
+
+
diff --git a/include/asm-cris/div64.h b/include/asm-cris/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-cris/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
new file mode 100644
index 000000000000..0d770f60127a
--- /dev/null
+++ b/include/asm-cris/dma-mapping.h
@@ -0,0 +1,125 @@
+#ifndef _ASM_CRIS_DMA_MAPPING_H
+#define _ASM_CRIS_DMA_MAPPING_H
+
+#include "scatterlist.h"
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG();
+	return 0;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG();
+	return 1;
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   int flag)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG();
+	return 1;
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+	    enum dma_data_direction direction)
+{
+	BUG();
+}
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d)	(1)
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << L1_CACHE_SHIFT_MAX);
+}
+
+static inline void
+dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+#endif
+
diff --git a/include/asm-cris/dma.h b/include/asm-cris/dma.h
new file mode 100644
index 000000000000..c229fac35cdc
--- /dev/null
+++ b/include/asm-cris/dma.h
@@ -0,0 +1,13 @@
+/* $Id: dma.h,v 1.2 2001/05/09 12:17:42 johana Exp $ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/arch/dma.h>
+
+/* it's useless on the Etrax, but unfortunately needed by the new
+   bootmem allocator (but this should do it for this) */
+
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-cris/elf.h b/include/asm-cris/elf.h
new file mode 100644
index 000000000000..d37fd5c4a567
--- /dev/null
+++ b/include/asm-cris/elf.h
@@ -0,0 +1,61 @@
+#ifndef __ASMCRIS_ELF_H
+#define __ASMCRIS_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/arch/elf.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+/* Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+   thus exposed to user-space. */
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* A placeholder; CRIS does not have any fp regs.  */
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( (x)->e_machine == EM_CRIS )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB;
+#define ELF_ARCH	EM_CRIS
+
+#define USE_ELF_CORE_DUMP
+
+#define ELF_EXEC_PAGESIZE	8192
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+*/
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif
diff --git a/include/asm-cris/errno.h b/include/asm-cris/errno.h
new file mode 100644
index 000000000000..2bf5eb5fa773
--- /dev/null
+++ b/include/asm-cris/errno.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_ERRNO_H
+#define _CRIS_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-cris/eshlibld.h b/include/asm-cris/eshlibld.h
new file mode 100644
index 000000000000..2b577cde17eb
--- /dev/null
+++ b/include/asm-cris/eshlibld.h
@@ -0,0 +1,114 @@
+/*!**************************************************************************
+*!
+*! FILE NAME  : eshlibld.h
+*!
+*! DESCRIPTION: Prototypes for exported shared library functions
+*!
+*! FUNCTIONS  : perform_cris_aout_relocations, shlibmod_fork, shlibmod_exit
+*! (EXPORTED)
+*!
+*!---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1998, 1999 Axis Communications AB, LUND, SWEDEN
+*!
+*!**************************************************************************/
+/* $Id: eshlibld.h,v 1.2 2001/02/23 13:47:33 bjornw Exp $ */
+
+#ifndef _cris_relocate_h
+#define _cris_relocate_h
+
+/* Please note that this file is also compiled into the xsim simulator.
+   Try to avoid breaking its double use (only works on a little-endian
+   32-bit machine such as the i386 anyway).
+
+   Use __KERNEL__ when you're about to use kernel functions,
+       (which you should not do here anyway, since this file is
+       used by glibc).
+   Use defined(__KERNEL__) || defined(__elinux__) when doing
+       things that only makes sense on an elinux system.
+   Use __CRIS__ when you're about to do (really) CRIS-specific code.
+*/
+
+/* We have dependencies all over the place for the host system
+   for xsim being a linux system, so let's not pretend anything
+   else with #ifdef:s here until fixed.  */
+#include <linux/config.h>
+#include <linux/limits.h>
+
+/* Maybe do sanity checking if file input. */
+#undef SANITYCHECK_RELOC
+
+/* Maybe output debug messages. */
+#undef RELOC_DEBUG
+
+/* Maybe we want to share core as well as disk space.
+   Mainly depends on the config macro CONFIG_SHARE_SHLIB_CORE, but it is
+   assumed that we want to share code when debugging (exposes more
+   trouble). */
+#ifndef SHARE_LIB_CORE
+# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \
+     && !defined(CONFIG_SHARE_SHLIB_CORE)
+#  define SHARE_LIB_CORE 0
+# else
+#  define SHARE_LIB_CORE 1
+# endif /* __KERNEL__ etc */
+#endif /* SHARE_LIB_CORE */
+
+
+/* Main exported function; supposed to be called when the program a.out
+   has been read in. */
+extern int
+perform_cris_aout_relocations(unsigned long text, unsigned long tlength,
+			      unsigned long data, unsigned long dlength,
+			      unsigned long baddr, unsigned long blength,
+
+			      /* These may be zero when there's "perfect"
+				 position-independent code. */
+			      unsigned char *trel, unsigned long tsrel,
+			      unsigned long dsrel,
+
+			      /* These will be zero at a first try, to see
+				 if code is statically linked.  Else a
+				 second try, with the symbol table and
+				 string table nonzero should be done. */
+			      unsigned char *symbols, unsigned long symlength,
+			      unsigned char *strings, unsigned long stringlength,
+
+			      /* These will only be used when symbol table
+			       information is present. */
+			      char **env, int envc,
+			      int euid, int is_suid);
+
+
+#ifdef RELOC_DEBUG
+/* Task-specific debug stuff. */
+struct task_reloc_debug {
+	struct memdebug *alloclast;
+	unsigned long alloc_total;
+	unsigned long export_total;
+};
+#endif /* RELOC_DEBUG */
+
+#if SHARE_LIB_CORE
+
+/* When code (and some very specific data) is shared and not just
+   dynamically linked, we need to export hooks for exec beginning and
+   end. */
+
+struct shlibdep;
+
+extern void
+shlibmod_exit(struct shlibdep **deps);
+
+/* Returns 0 if failure, nonzero for ok. */
+extern int
+shlibmod_fork(struct shlibdep **deps);
+
+#else  /* ! SHARE_LIB_CORE */
+# define shlibmod_exit(x)
+# define shlibmod_fork(x) 1
+#endif /* ! SHARE_LIB_CORE */
+
+#endif _cris_relocate_h
+/********************** END OF FILE eshlibld.h *****************************/
+
diff --git a/include/asm-cris/ethernet.h b/include/asm-cris/ethernet.h
new file mode 100644
index 000000000000..30da58a7d00d
--- /dev/null
+++ b/include/asm-cris/ethernet.h
@@ -0,0 +1,18 @@
+/*  
+ * ioctl defines for ethernet driver
+ *
+ * Copyright (c) 2001 Axis Communications AB
+ * 
+ * Author: Mikael Starvik 
+ *
+ */
+
+#ifndef _CRIS_ETHERNET_H
+#define _CRIS_ETHERNET_H
+#define SET_ETH_SPEED_AUTO      SIOCDEVPRIVATE          /* Auto neg speed */
+#define SET_ETH_SPEED_10        SIOCDEVPRIVATE+1        /* 10 Mbps */
+#define SET_ETH_SPEED_100       SIOCDEVPRIVATE+2        /* 100 Mbps. */
+#define SET_ETH_DUPLEX_AUTO     SIOCDEVPRIVATE+3        /* Auto neg duplex */
+#define SET_ETH_DUPLEX_HALF     SIOCDEVPRIVATE+4        /* Full duplex */
+#define SET_ETH_DUPLEX_FULL     SIOCDEVPRIVATE+5        /* Half duplex */
+#endif /* _CRIS_ETHERNET_H */
diff --git a/include/asm-cris/etraxgpio.h b/include/asm-cris/etraxgpio.h
new file mode 100644
index 000000000000..cf04af9635cc
--- /dev/null
+++ b/include/asm-cris/etraxgpio.h
@@ -0,0 +1,104 @@
+/* $Id: etraxgpio.h,v 1.8 2002/06/17 15:53:07 johana Exp $ */
+/*
+ * The following devices are accessable using this driver using
+ * GPIO_MAJOR (120) and a couple of minor numbers:
+ * For ETRAX 100LX (ARCH_V10):
+ * /dev/gpioa  minor 0, 8 bit GPIO, each bit can change direction
+ * /dev/gpiob  minor 1, 8 bit GPIO, each bit can change direction
+ * /dev/leds   minor 2, Access to leds depending on kernelconfig
+ * /dev/gpiog  minor 3
+         g0dir, g8_15dir, g16_23dir, g24 dir configurable in R_GEN_CONFIG
+         g1-g7 and g25-g31 is both input and outputs but on different pins
+         Also note that some bits change pins depending on what interfaces 
+         are enabled.
+ *
+ *
+ * For ETRAX 200 (ARCH_V32):
+ * /dev/gpioa  minor 0,  8 bit GPIO, each bit can change direction
+ * /dev/gpiob  minor 1, 18 bit GPIO, each bit can change direction
+ * /dev/gpioc  minor 2, 18 bit GPIO, each bit can change direction
+ * /dev/gpiod  minor 3, 18 bit GPIO, each bit can change direction
+ * /dev/gpioe  minor 4, 18 bit GPIO, each bit can change direction
+ * /dev/leds   minor 5, Access to leds depending on kernelconfig
+ *
+ */
+#ifndef _ASM_ETRAXGPIO_H
+#define _ASM_ETRAXGPIO_H
+
+#include <linux/config.h>
+/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
+#ifdef CONFIG_ETRAX_ARCH_V10
+#define ETRAXGPIO_IOCTYPE 43
+#define GPIO_MINOR_A 0
+#define GPIO_MINOR_B 1
+#define GPIO_MINOR_LEDS 2
+#define GPIO_MINOR_G 3
+#define GPIO_MINOR_LAST 3
+#endif
+#ifdef CONFIG_ETRAX_ARCH_V32
+#define ETRAXGPIO_IOCTYPE 43
+#define GPIO_MINOR_A 0
+#define GPIO_MINOR_B 1
+#define GPIO_MINOR_C 2
+#define GPIO_MINOR_D 3
+#define GPIO_MINOR_E 4
+#define GPIO_MINOR_LEDS 5
+#define GPIO_MINOR_LAST 5
+#endif
+
+/* supported ioctl _IOC_NR's */
+
+#define IO_READBITS  0x1  /* read and return current port bits (obsolete) */
+#define IO_SETBITS   0x2  /* set the bits marked by 1 in the argument */
+#define IO_CLRBITS   0x3  /* clear the bits marked by 1 in the argument */
+
+/* the alarm is waited for by select() */
+
+#define IO_HIGHALARM 0x4  /* set alarm on high for bits marked by 1 */
+#define IO_LOWALARM  0x5  /* set alarm on low for bits marked by 1 */
+#define IO_CLRALARM  0x6  /* clear alarm for bits marked by 1 */
+
+/* LED ioctl */
+#define IO_LEDACTIVE_SET 0x7 /* set active led
+                              * 0=off, 1=green, 2=red, 3=yellow */
+
+/* GPIO direction ioctl's */
+#define IO_READDIR    0x8  /* Read direction 0=input 1=output  (obsolete) */
+#define IO_SETINPUT   0x9  /* Set direction for bits set, 0=unchanged 1=input, 
+                              returns mask with current inputs (obsolete) */
+#define IO_SETOUTPUT  0xA  /* Set direction for bits set, 0=unchanged 1=output,
+                              returns mask with current outputs (obsolete)*/
+
+/* LED ioctl extended */
+#define IO_LED_SETBIT 0xB
+#define IO_LED_CLRBIT 0xC
+
+/* SHUTDOWN ioctl */
+#define IO_SHUTDOWN   0xD
+#define IO_GET_PWR_BT 0xE
+
+/* Bit toggling in driver settings */
+/* bit set in low byte0 is CLK mask (0x00FF), 
+   bit set in byte1 is DATA mask    (0xFF00) 
+   msb, data_mask[7:0] , clk_mask[7:0]
+ */
+#define IO_CFG_WRITE_MODE 0xF 
+#define IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask) \
+  ( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) & 0xFF) )
+
+/* The following 4 ioctl's take a pointer as argument and handles
+ * 32 bit ports (port G) properly.
+ * These replaces IO_READBITS,IO_SETINPUT AND IO_SETOUTPUT
+ */
+#define IO_READ_INBITS   0x10 /* *arg is result of reading the input pins */
+#define IO_READ_OUTBITS  0x11 /* *arg is result of reading the output shadow */
+#define IO_SETGET_INPUT  0x12 /* bits set in *arg is set to input,
+                               * *arg updated with current input pins.
+                               */
+#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output,
+                               * *arg updated with current output pins.
+                               */
+
+
+
+#endif
diff --git a/include/asm-cris/etraxi2c.h b/include/asm-cris/etraxi2c.h
new file mode 100644
index 000000000000..e369a7620893
--- /dev/null
+++ b/include/asm-cris/etraxi2c.h
@@ -0,0 +1,36 @@
+/* $Id: etraxi2c.h,v 1.1 2001/01/18 15:49:57 bjornw Exp $ */
+
+#ifndef _LINUX_ETRAXI2C_H
+#define _LINUX_ETRAXI2C_H
+
+/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
+
+#define ETRAXI2C_IOCTYPE 44
+
+/* supported ioctl _IOC_NR's */
+
+/* in write operations, the argument contains both i2c
+ * slave, register and value.
+ */
+
+#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
+#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
+
+#define I2C_ARGSLAVE(arg) ((arg) >> 16)
+#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
+#define I2C_ARGVALUE(arg) ((arg) & 0xff)
+
+#define I2C_WRITEREG 0x1   /* write to an i2c register */
+#define I2C_READREG  0x2   /* read from an i2c register */
+
+/*
+EXAMPLE usage:
+
+    i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+    ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+
+    i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+    val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+*/
+#endif
diff --git a/include/asm-cris/fasttimer.h b/include/asm-cris/fasttimer.h
new file mode 100644
index 000000000000..69522028baa5
--- /dev/null
+++ b/include/asm-cris/fasttimer.h
@@ -0,0 +1,44 @@
+/* $Id: fasttimer.h,v 1.3 2004/05/14 10:19:19 starvik Exp $
+ * linux/include/asm-cris/fasttimer.h
+ *
+ * Fast timers for ETRAX100LX
+ * This may be useful in other OS than Linux so use 2 space indentation...
+ * Copyright (C) 2000, 2002 Axis Communications AB
+ */
+#include <linux/config.h>
+#include <linux/time.h> /* struct timeval */
+#include <linux/timex.h>
+
+#ifdef CONFIG_ETRAX_FAST_TIMER
+
+typedef void fast_timer_function_type(unsigned long);
+
+struct fast_timer{ /* Close to timer_list */
+  struct fast_timer *next;
+  struct fast_timer *prev;
+  struct timeval tv_set;
+  struct timeval tv_expires;
+  unsigned long delay_us;
+  fast_timer_function_type *function;
+  unsigned long data;
+  const char *name;
+};
+
+extern struct fast_timer *fast_timer_list;
+
+void start_one_shot_timer(struct fast_timer *t,
+                          fast_timer_function_type *function,
+                          unsigned long data,
+                          unsigned long delay_us,
+                          const char *name);
+
+int del_fast_timer(struct fast_timer * t);
+/* return 1 if deleted */
+
+
+void schedule_usleep(unsigned long us);
+
+
+void fast_timer_init(void);
+
+#endif
diff --git a/include/asm-cris/fcntl.h b/include/asm-cris/fcntl.h
new file mode 100644
index 000000000000..61c563242b51
--- /dev/null
+++ b/include/asm-cris/fcntl.h
@@ -0,0 +1,90 @@
+#ifndef _CRIS_FCNTL_H
+#define _CRIS_FCNTL_H
+
+/* verbatim copy of i386 version */
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get f_flags */
+#define F_SETFD		2	/* set f_flags */
+#define F_GETFL		3	/* more flags (cloexec) */
+#define F_SETFL		4
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64      12      /*  using 'struct flock64' */
+#define F_SETLK64      13
+#define F_SETLKW64     14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS   16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND      32      /* This is a mandatory flock */
+#define LOCK_READ      64      /* ... Which allows concurrent read operations */
+#define LOCK_WRITE     128     /* ... Which allows concurrent write operations */
+#define LOCK_RW        192     /* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE  1024
+
+#endif
diff --git a/include/asm-cris/hardirq.h b/include/asm-cris/hardirq.h
new file mode 100644
index 000000000000..f4d136228ee1
--- /dev/null
+++ b/include/asm-cris/hardirq.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+/* only non-SMP supported */
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-cris/io.h b/include/asm-cris/io.h
new file mode 100644
index 000000000000..1d2b51701e8d
--- /dev/null
+++ b/include/asm-cris/io.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_CRIS_IO_H
+#define _ASM_CRIS_IO_H
+
+#include <asm/page.h>   /* for __va, __pa */
+#include <asm/arch/io.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+extern inline void * ioremap (unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, 0);
+}
+
+extern void iounmap(void *addr);
+
+/*
+ * IO bus memory addresses are also 1:1 with the physical address
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the CRIS architecture, we just read/write the
+ * memory location directly.
+ */
+#define readb(addr) (*(volatile unsigned char *) (addr))
+#define readw(addr) (*(volatile unsigned short *) (addr))
+#define readl(addr) (*(volatile unsigned int *) (addr))
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define writeb(b,addr) ((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) ((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define mmiowb()
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+/*
+ * Again, CRIS does not require mem IO specific function.
+ */
+
+#define eth_io_copy_and_sum(a,b,c,d)	eth_copy_and_sum((a),(void *)(b),(c),(d))
+
+/* The following is junk needed for the arch-independent code but which
+ * we never use in the CRIS port
+ */
+
+#define IO_SPACE_LIMIT 0xffff
+#define inb(x) (0)
+#define inw(x) (0)
+#define inl(x) (0)
+#define outb(x,y)
+#define outw(x,y)
+#define outl(x,y)
+#define insb(x,y,z)
+#define insw(x,y,z)
+#define insl(x,y,z)
+#define outsb(x,y,z)
+#define outsw(x,y,z)
+#define outsl(x,y,z)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
diff --git a/include/asm-cris/ioctl.h b/include/asm-cris/ioctl.h
new file mode 100644
index 000000000000..be2d8f667a38
--- /dev/null
+++ b/include/asm-cris/ioctl.h
@@ -0,0 +1,83 @@
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ *
+ * This is the same as the i386 version.
+ */
+
+#ifndef _ASMCRIS_IOCTL_H
+#define _ASMCRIS_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASMCRIS_IOCTL_H */
diff --git a/include/asm-cris/ioctls.h b/include/asm-cris/ioctls.h
new file mode 100644
index 000000000000..97787c3c575f
--- /dev/null
+++ b/include/asm-cris/ioctls.h
@@ -0,0 +1,87 @@
+#ifndef __ARCH_CRIS_IOCTLS_H__
+#define __ARCH_CRIS_IOCTLS_H__
+
+/* verbatim copy of asm-i386/ioctls.h */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+#define TIOCSERSETRS485 0x5461  /* enable rs-485 */
+#define TIOCSERWRRS485  0x5462  /* write rs-485 */
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-cris/ipc.h b/include/asm-cris/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-cris/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-cris/ipcbuf.h b/include/asm-cris/ipcbuf.h
new file mode 100644
index 000000000000..8b0c18b02844
--- /dev/null
+++ b/include/asm-cris/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __CRIS_IPCBUF_H__
+#define __CRIS_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for CRIS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __CRIS_IPCBUF_H__ */
diff --git a/include/asm-cris/irq.h b/include/asm-cris/irq.h
new file mode 100644
index 000000000000..87f342517bb1
--- /dev/null
+++ b/include/asm-cris/irq.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/arch/irq.h>
+
+extern __inline__ int irq_canonicalize(int irq)
+{  
+  return irq; 
+}
+
+extern void disable_irq(unsigned int);
+extern void enable_irq(unsigned int);
+
+#define disable_irq_nosync      disable_irq
+#define enable_irq_nosync       enable_irq
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif  /* _ASM_IRQ_H */
+
+
diff --git a/include/asm-cris/kmap_types.h b/include/asm-cris/kmap_types.h
new file mode 100644
index 000000000000..eec0974c2417
--- /dev/null
+++ b/include/asm-cris/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on cris. 
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_CRYPTO_USER,
+	KM_CRYPTO_SOFTIRQ,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-cris/linkage.h b/include/asm-cris/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-cris/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-cris/local.h b/include/asm-cris/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/include/asm-cris/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/include/asm-cris/mman.h b/include/asm-cris/mman.h
new file mode 100644
index 000000000000..8570e72b9502
--- /dev/null
+++ b/include/asm-cris/mman.h
@@ -0,0 +1,45 @@
+#ifndef __CRIS_MMAN_H__
+#define __CRIS_MMAN_H__
+
+/* verbatim copy of asm-i386/ version */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __CRIS_MMAN_H__ */
diff --git a/include/asm-cris/mmu.h b/include/asm-cris/mmu.h
new file mode 100644
index 000000000000..c40a1bcad06c
--- /dev/null
+++ b/include/asm-cris/mmu.h
@@ -0,0 +1,10 @@
+/*
+ * CRIS MMU constants and PTE layout
+ */
+
+#ifndef _CRIS_MMU_H
+#define _CRIS_MMU_H
+
+#include <asm/arch/mmu.h>
+
+#endif
diff --git a/include/asm-cris/mmu_context.h b/include/asm-cris/mmu_context.h
new file mode 100644
index 000000000000..f9308c5bbd99
--- /dev/null
+++ b/include/asm-cris/mmu_context.h
@@ -0,0 +1,24 @@
+#ifndef __CRIS_MMU_CONTEXT_H
+#define __CRIS_MMU_CONTEXT_H
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void get_mmu_context(struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+		      struct task_struct *tsk);
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev,next) switch_mm((prev),(next),NULL)
+
+/* current active pgd - this is similar to other processors pgd 
+ * registers like cr3 on the i386
+ */
+
+extern volatile pgd_t *current_pgd;   /* defined in arch/cris/mm/fault.c */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#endif
diff --git a/include/asm-cris/module.h b/include/asm-cris/module.h
new file mode 100644
index 000000000000..7ee72311bd78
--- /dev/null
+++ b/include/asm-cris/module.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_CRIS_MODULE_H
+#define _ASM_CRIS_MODULE_H
+/* cris is simple */
+struct mod_arch_specific { };
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_CRIS_MODULE_H */
diff --git a/include/asm-cris/msgbuf.h b/include/asm-cris/msgbuf.h
new file mode 100644
index 000000000000..ada63df1d574
--- /dev/null
+++ b/include/asm-cris/msgbuf.h
@@ -0,0 +1,33 @@
+#ifndef _CRIS_MSGBUF_H
+#define _CRIS_MSGBUF_H
+
+/* verbatim copy of asm-i386 version */
+
+/* 
+ * The msqid64_ds structure for CRIS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _CRIS_MSGBUF_H */
diff --git a/include/asm-cris/namei.h b/include/asm-cris/namei.h
new file mode 100644
index 000000000000..8a3be7a6d9f6
--- /dev/null
+++ b/include/asm-cris/namei.h
@@ -0,0 +1,17 @@
+/* $Id: namei.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $
+ * linux/include/asm-cris/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __CRIS_NAMEI_H
+#define __CRIS_NAMEI_H
+
+/* used to find file-system prefixes for doing emulations
+ * see for example asm-sparc/namei.h
+ * we don't use it...
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __CRIS_NAMEI_H */
diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h
new file mode 100644
index 000000000000..ddd8915e41e6
--- /dev/null
+++ b/include/asm-cris/page.h
@@ -0,0 +1,105 @@
+#ifndef _CRIS_PAGE_H
+#define _CRIS_PAGE_H
+
+#include <linux/config.h>
+#include <asm/arch/page.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	13
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#define clear_page(page)        memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)      memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)    clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifndef __ASSEMBLY__
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+#endif
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* On CRIS the PFN numbers doesn't start at 0 so we have to compensate */
+/* for that before indexing into the page table starting at mem_map    */
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - (PAGE_OFFSET >> PAGE_SHIFT)))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + (PAGE_OFFSET >> PAGE_SHIFT))
+#define pfn_valid(pfn)		(((pfn) - (PAGE_OFFSET >> PAGE_SHIFT)) < max_mapnr)
+
+/* to index into the page map. our pages all start at physical addr PAGE_OFFSET so
+ * we can let the map start there. notice that we subtract PAGE_OFFSET because
+ * we start our mem_map there - in other ports they map mem_map physically and
+ * use __pa instead. in our system both the physical and virtual address of DRAM
+ * is too high to let mem_map start at 0, so we do it this way instead (similar
+ * to arm and m68k I think)
+ */ 
+
+#define virt_to_page(kaddr)    (mem_map + (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT))
+#define VALID_PAGE(page)       (((page) - mem_map) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid((unsigned)(kaddr) >> PAGE_SHIFT)
+
+/* convert a page (based on mem_map and forward) to a physical address
+ * do this by figuring out the virtual address and then use __pa
+ */
+
+#define page_to_phys(page)     __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#ifndef __ASSEMBLY__
+
+#define BUG() do { \
+  printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+} while (0)
+
+#define PAGE_BUG(page) do { \
+         BUG(); \
+} while (0)
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_PAGE_H */
+
diff --git a/include/asm-cris/param.h b/include/asm-cris/param.h
new file mode 100644
index 000000000000..b24972639832
--- /dev/null
+++ b/include/asm-cris/param.h
@@ -0,0 +1,23 @@
+#ifndef _ASMCRIS_PARAM_H
+#define _ASMCRIS_PARAM_H
+
+/* Currently we assume that HZ=100 is good for CRIS. */
+#ifdef __KERNEL__
+# define HZ		100		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-cris/pci.h b/include/asm-cris/pci.h
new file mode 100644
index 000000000000..c61041531889
--- /dev/null
+++ b/include/asm-cris/pci.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_CRIS_PCI_H
+#define __ASM_CRIS_PCI_H
+
+#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+
+/* ETRAX chips don't have a PCI bus. This file is just here because some stupid .c code
+ * includes it even if CONFIG_PCI is not set.
+ */
+#define PCI_DMA_BUS_IS_PHYS       (1)
+
+#endif /* __ASM_CRIS_PCI_H */
+
diff --git a/include/asm-cris/percpu.h b/include/asm-cris/percpu.h
new file mode 100644
index 000000000000..6db9b43cf80a
--- /dev/null
+++ b/include/asm-cris/percpu.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_PERCPU_H
+#define _CRIS_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* _CRIS_PERCPU_H */
diff --git a/include/asm-cris/pgalloc.h b/include/asm-cris/pgalloc.h
new file mode 100644
index 000000000000..b202e62ed6e0
--- /dev/null
+++ b/include/asm-cris/pgalloc.h
@@ -0,0 +1,62 @@
+#ifndef _CRIS_PGALLOC_H
+#define _CRIS_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>
+
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte)
+#define pmd_populate(mm, pmd, pte) pmd_set(pmd, page_address(pte))
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern inline pgd_t *pgd_alloc (struct mm_struct *mm)
+{
+	return (pgd_t *)get_zeroed_page(GFP_KERNEL);
+}
+
+extern inline void pgd_free (pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+  	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ 	return pte;
+}
+
+extern inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *pte;
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	return pte;
+}
+
+extern inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+extern inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+
+#define pmd_alloc_one(mm, addr)    ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)                do { } while (0)
+#define __pmd_free_tlb(tlb,x)      do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#define check_pgt_cache()          do { } while (0)
+
+#endif
diff --git a/include/asm-cris/pgtable.h b/include/asm-cris/pgtable.h
new file mode 100644
index 000000000000..957dd92d108d
--- /dev/null
+++ b/include/asm-cris/pgtable.h
@@ -0,0 +1,352 @@
+/*
+ * CRIS pgtable.h - macros and functions to manipulate page tables.
+ */
+
+#ifndef _CRIS_PGTABLE_H
+#define _CRIS_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/mmu.h>
+#endif
+#include <asm/arch/pgtable.h>
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * CRIS, we use that, but "fold" the mid level into the top-level page
+ * table. Since the MMU TLB is software loaded through an interrupt, it
+ * supports any page table structure, so we could have used a three-level
+ * setup, but for the amounts of memory we normally use, a two-level is
+ * probably more efficient.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the CRIS page table tree.
+ */
+#ifndef __ASSEMBLY__
+extern void paging_init(void);
+#endif
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
+
+/* PMD_SHIFT determines the size of the area a second-level page table can
+ * map. It is equal to the page size times the number of PTE's that fit in
+ * a PMD page. A PTE is 4-bytes in CRIS. Hence the following number.
+ */
+
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-2))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map.
+ * Since we fold into a two-level structure, this is the same as PMD_SHIFT.
+ */
+
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: we use a two-level, so
+ * we don't really have any PMD directory physically.
+ * pointers are 4 bytes so we can use the page size and 
+ * divide it by 4 (shift by 2).
+ */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-2))
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-2))
+
+/* calculate how many PGD entries a user-level program can use
+ * the first mappable virtual address is 0
+ * (TASK_SIZE is the maximum virtual address space)
+ */
+
+#define USER_PTRS_PER_PGD       (TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR       0
+
+/* zero page used for uninitialized stuff */
+#ifndef __ASSEMBLY__
+extern unsigned long empty_zero_page;
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware!  SRB. */
+#define SIZEOF_PTR_LOG2			2
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address) \
+((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+/* to set the page-dir */
+#define SET_PAGE_DIR(tsk,pgdir)
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad
+ * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries.
+ */
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE)
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { pmd_val(*(xp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+extern inline int pgd_none(pgd_t pgd)		{ return 0; }
+extern inline int pgd_bad(pgd_t pgd)		{ return 0; }
+extern inline int pgd_present(pgd_t pgd)	{ return 1; }
+extern inline void pgd_clear(pgd_t * pgdp)	{ }
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+extern inline int pte_read(pte_t pte)           { return pte_val(pte) & _PAGE_READ; }
+extern inline int pte_write(pte_t pte)          { return pte_val(pte) & _PAGE_WRITE; }
+extern inline int pte_exec(pte_t pte)           { return pte_val(pte) & _PAGE_READ; }
+extern inline int pte_dirty(pte_t pte)          { return pte_val(pte) & _PAGE_MODIFIED; }
+extern inline int pte_young(pte_t pte)          { return pte_val(pte) & _PAGE_ACCESSED; }
+extern inline int pte_file(pte_t pte)           { return pte_val(pte) & _PAGE_FILE; }
+
+extern inline pte_t pte_wrprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+        return pte;
+}
+
+extern inline pte_t pte_rdprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+	return pte;
+}
+
+extern inline pte_t pte_exprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+	return pte;
+}
+
+extern inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); 
+	return pte; 
+}
+
+extern inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+	return pte;
+}
+
+extern inline pte_t pte_mkwrite(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_WRITE;
+        if (pte_val(pte) & _PAGE_MODIFIED)
+                pte_val(pte) |= _PAGE_SILENT_WRITE;
+        return pte;
+}
+
+extern inline pte_t pte_mkread(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_READ;
+        if (pte_val(pte) & _PAGE_ACCESSED)
+                pte_val(pte) |= _PAGE_SILENT_READ;
+        return pte;
+}
+
+extern inline pte_t pte_mkexec(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_READ;
+        if (pte_val(pte) & _PAGE_ACCESSED)
+                pte_val(pte) |= _PAGE_SILENT_READ;
+        return pte;
+}
+
+extern inline pte_t pte_mkdirty(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_MODIFIED;
+        if (pte_val(pte) & _PAGE_WRITE)
+                pte_val(pte) |= _PAGE_SILENT_WRITE;
+        return pte;
+}
+
+extern inline pte_t pte_mkyoung(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_ACCESSED;
+        if (pte_val(pte) & _PAGE_READ)
+        {
+                pte_val(pte) |= _PAGE_SILENT_READ;
+                if ((pte_val(pte) & (_PAGE_WRITE | _PAGE_MODIFIED)) ==
+		    (_PAGE_WRITE | _PAGE_MODIFIED))
+                        pte_val(pte) |= _PAGE_SILENT_WRITE;
+        }
+        return pte;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+/* What actually goes as arguments to the various functions is less than
+ * obvious, but a rule of thumb is that struct page's goes as struct page *,
+ * really physical DRAM addresses are unsigned long's, and DRAM "virtual"
+ * addresses (the 0xc0xxxxxx's) goes as void *'s.
+ */
+
+extern inline pte_t __mk_pte(void * page, pgprot_t pgprot)
+{
+	pte_t pte;
+	/* the PTE needs a physical address */
+	pte_val(pte) = __pa(page) | pgprot_val(pgprot);
+	return pte;
+}
+
+#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot))
+
+#define mk_pte_phys(physpage, pgprot) \
+({                                                                      \
+        pte_t __pte;                                                    \
+                                                                        \
+        pte_val(__pte) = (physpage) + pgprot_val(pgprot);               \
+        __pte;                                                          \
+})
+
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+
+
+/* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
+ * __pte_page(pte_val) refers to the "virtual" DRAM interval
+ * pte_pagenr refers to the page-number counted starting from the virtual DRAM start
+ */
+
+extern inline unsigned long __pte_page(pte_t pte)
+{
+	/* the PTE contains a physical address */
+	return (unsigned long)__va(pte_val(pte) & PAGE_MASK);
+}
+
+#define pte_pagenr(pte)         ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
+
+/* permanent address of a page */
+
+#define __page_address(page)    (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define pte_page(pte)           (mem_map+pte_pagenr(pte))
+
+/* only the pte's themselves need to point to physical DRAM (see above)
+ * the pagetable links are purely handled within the kernel SW and thus
+ * don't need the __pa and __va transformations.
+ */
+
+extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+{ pmd_val(*pmdp) = _PAGE_TABLE | (unsigned long) ptep; }
+
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#define pmd_page_kernel(pmd)	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) ((address >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address) \
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  __pte_offset(address))
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#define pte_pfn(x)		((unsigned long)(__va((x).pte)) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte((__pa((pfn) << PAGE_SHIFT)) | pgprot_val(prot))
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e))
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %p(%08lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
+
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */
+
+/*
+ * CRIS doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ * 
+ * Actually I am not sure on what this could be used for.
+ */
+extern inline void update_mmu_cache(struct vm_area_struct * vma,
+	unsigned long address, pte_t pte)
+{
+}
+
+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
+/* Since the PAGE_PRESENT bit is bit 4, we can use the bits above */
+
+#define __swp_type(x)			(((x).val >> 5) & 0x7f)
+#define __swp_offset(x)			((x).val >> 12)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 5) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr)   (1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()   do { } while (0)
+
+#define pte_to_pgoff(x)	(pte_val(x) >> 6)
+#define pgoff_to_pte(x)	__pte(((x) << 6) | _PAGE_FILE)
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CRIS_PGTABLE_H */
diff --git a/include/asm-cris/poll.h b/include/asm-cris/poll.h
new file mode 100644
index 000000000000..1c0efc3e4be7
--- /dev/null
+++ b/include/asm-cris/poll.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_CRIS_POLL_H
+#define __ASM_CRIS_POLL_H
+
+/* taken from asm-alpha */
+
+#define POLLIN		1
+#define POLLPRI		2
+#define POLLOUT		4
+#define POLLERR		8
+#define POLLHUP		16
+#define POLLNVAL	32
+#define POLLRDNORM	64
+#define POLLRDBAND	128
+#define POLLWRNORM	256
+#define POLLWRBAND	512
+#define POLLMSG		1024
+#define POLLREMOVE	4096
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-cris/posix_types.h b/include/asm-cris/posix_types.h
new file mode 100644
index 000000000000..6d26fee4a614
--- /dev/null
+++ b/include/asm-cris/posix_types.h
@@ -0,0 +1,74 @@
+/* $Id: posix_types.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */
+
+/* We cheat a bit and use our C-coded bitops functions from asm/bitops.h */
+/* I guess we should write these in assembler because they are used often. */
+
+#ifndef __ARCH_CRIS_POSIX_TYPES_H
+#define __ARCH_CRIS_POSIX_TYPES_H
+
+#include <asm/bitops.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef __SIZE_TYPE__	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+/* should this ifdef be here ?  */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd,fdsetp) set_bit(fd, (void *)(fdsetp))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd,fdsetp) clear_bit(fd, (void *)(fdsetp))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd,fdsetp) test_bit(fd, (void *)(fdsetp))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) memset((void *)(fdsetp), 0, __FDSET_LONGS << 2)
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ARCH_CRIS_POSIX_TYPES_H */
diff --git a/include/asm-cris/processor.h b/include/asm-cris/processor.h
new file mode 100644
index 000000000000..623bdf06d911
--- /dev/null
+++ b/include/asm-cris/processor.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-cris/processor.h
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors:         Bjorn Wesen        Initial version
+ *
+ */
+
+#ifndef __ASM_CRIS_PROCESSOR_H
+#define __ASM_CRIS_PROCESSOR_H
+
+#include <linux/config.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/arch/processor.h>
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (PAGE_ALIGN(TASK_SIZE / 3))
+
+/* THREAD_SIZE is the size of the task_struct/kernel_stack combo.
+ * normally, the stack is found by doing something like p + THREAD_SIZE
+ * in CRIS, a page is 8192 bytes, which seems like a sane size
+ */
+
+#define THREAD_SIZE       PAGE_SIZE
+#define KERNEL_STACK_SIZE PAGE_SIZE
+
+/*
+ * At user->kernel entry, the pt_regs struct is stacked on the top of the kernel-stack.
+ * This macro allows us to find those regs for a task.
+ * Notice that subsequent pt_regs stackings, like recursive interrupts occurring while
+ * we're in the kernel, won't affect this - only the first user->kernel transition
+ * registers are reached by this.
+ */
+
+#define user_regs(thread_info) (((struct pt_regs *)((unsigned long)(thread_info) + THREAD_SIZE)) - 1)
+
+/*
+ * Dito but for the currently running task
+ */
+
+#define current_regs() user_regs(current->thread_info)
+
+extern inline void prepare_to_copy(struct task_struct *tsk)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_ESP(tsk)   ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+/*
+ * Free current thread data structures etc..
+ */
+
+extern inline void exit_thread(void)
+{
+        /* Nothing needs to be done.  */
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+/* Free all resources held by a thread. */
+extern inline void release_thread(struct task_struct *dead_task)
+{
+        /* Nothing needs to be done.  */
+}
+
+#define init_stack      (init_thread_union.stack)
+
+#define cpu_relax()     barrier()
+
+#endif /* __ASM_CRIS_PROCESSOR_H */
diff --git a/include/asm-cris/ptrace.h b/include/asm-cris/ptrace.h
new file mode 100644
index 000000000000..7a8c2880e487
--- /dev/null
+++ b/include/asm-cris/ptrace.h
@@ -0,0 +1,12 @@
+#ifndef _CRIS_PTRACE_H
+#define _CRIS_PTRACE_H
+
+#include <asm/arch/ptrace.h>
+
+#ifdef __KERNEL__
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#endif
+
+#endif /* _CRIS_PTRACE_H */
diff --git a/include/asm-cris/resource.h b/include/asm-cris/resource.h
new file mode 100644
index 000000000000..b5d29448de4e
--- /dev/null
+++ b/include/asm-cris/resource.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_RESOURCE_H
+#define _CRIS_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-cris/rs485.h b/include/asm-cris/rs485.h
new file mode 100644
index 000000000000..c331c51b0c2b
--- /dev/null
+++ b/include/asm-cris/rs485.h
@@ -0,0 +1,20 @@
+/* RS-485 structures */
+
+/* RS-485 support */
+/* Used with ioctl() TIOCSERSETRS485 */
+struct rs485_control {
+        unsigned short rts_on_send;
+        unsigned short rts_after_sent;
+        unsigned long delay_rts_before_send;
+        unsigned short enabled;
+#ifdef __KERNEL__
+        int disable_serial_loopback;
+#endif
+};
+
+/* Used with ioctl() TIOCSERWRRS485 */
+struct rs485_write {
+        unsigned short outc_size;
+        unsigned char *outc;
+};
+
diff --git a/include/asm-cris/rtc.h b/include/asm-cris/rtc.h
new file mode 100644
index 000000000000..97c13039834a
--- /dev/null
+++ b/include/asm-cris/rtc.h
@@ -0,0 +1,107 @@
+/* $Id: rtc.h,v 1.7 2002/11/04 07:32:09 starvik Exp $ */
+
+#ifndef __RTC_H__
+#define __RTC_H__
+
+
+#include <linux/config.h>
+
+#ifdef CONFIG_ETRAX_DS1302
+   /* Dallas DS1302 clock/calendar register numbers. */
+#  define RTC_SECONDS      0
+#  define RTC_MINUTES      1
+#  define RTC_HOURS        2
+#  define RTC_DAY_OF_MONTH 3
+#  define RTC_MONTH        4
+#  define RTC_WEEKDAY      5
+#  define RTC_YEAR         6
+#  define RTC_CONTROL      7
+
+   /* Bits in CONTROL register. */
+#  define RTC_CONTROL_WRITEPROTECT 	0x80
+#  define RTC_TRICKLECHARGER 		8
+  
+  /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
+#  define RTC_TCR_PATTERN 	0xA0	/* 1010xxxx */
+#  define RTC_TCR_1DIOD 	0x04	/* xxxx01xx */
+#  define RTC_TCR_2DIOD 	0x08	/* xxxx10xx */
+#  define RTC_TCR_DISABLED 	0x00	/* xxxxxx00 Disabled */
+#  define RTC_TCR_2KOHM 	0x01	/* xxxxxx01 2KOhm */
+#  define RTC_TCR_4KOHM 	0x02	/* xxxxxx10 4kOhm */
+#  define RTC_TCR_8KOHM 	0x03	/* xxxxxx11 8kOhm */
+
+#elif defined(CONFIG_ETRAX_PCF8563)
+   /* I2C bus slave registers. */
+#  define RTC_I2C_READ		0xa3
+#  define RTC_I2C_WRITE		0xa2
+
+   /* Phillips PCF8563 registers. */
+#  define RTC_CONTROL1		0x00		/* Control/Status register 1. */
+#  define RTC_CONTROL2		0x01		/* Control/Status register 2. */
+#  define RTC_CLOCKOUT_FREQ	0x0d		/* CLKOUT frequency. */
+#  define RTC_TIMER_CONTROL	0x0e		/* Timer control. */
+#  define RTC_TIMER_CNTDOWN	0x0f		/* Timer countdown. */
+
+   /* BCD encoded clock registers. */
+#  define RTC_SECONDS		0x02
+#  define RTC_MINUTES		0x03
+#  define RTC_HOURS		0x04
+#  define RTC_DAY_OF_MONTH	0x05
+#  define RTC_WEEKDAY		0x06	/* Not coded in BCD! */
+#  define RTC_MONTH		0x07
+#  define RTC_YEAR		0x08
+#  define RTC_MINUTE_ALARM	0x09
+#  define RTC_HOUR_ALARM	0x0a
+#  define RTC_DAY_ALARM		0x0b
+#  define RTC_WEEKDAY_ALARM 0x0c
+
+#endif
+
+#ifdef CONFIG_ETRAX_DS1302
+extern unsigned char ds1302_readreg(int reg);
+extern void ds1302_writereg(int reg, unsigned char val);
+extern int ds1302_init(void);
+#  define CMOS_READ(x) ds1302_readreg(x)
+#  define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
+#  define RTC_INIT() ds1302_init()
+#elif defined(CONFIG_ETRAX_PCF8563)
+extern unsigned char pcf8563_readreg(int reg);
+extern void pcf8563_writereg(int reg, unsigned char val);
+extern int pcf8563_init(void);
+#  define CMOS_READ(x) pcf8563_readreg(x)
+#  define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val)
+#  define RTC_INIT() pcf8563_init()
+#else
+  /* No RTC configured so we shouldn't try to access any. */
+#  define CMOS_READ(x) 42
+#  define CMOS_WRITE(x,y)
+#  define RTC_INIT() (-1)
+#endif
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel 
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/* ioctl() calls that are permitted to the /dev/rtc interface. */
+#define RTC_MAGIC 'p'
+#define RTC_RD_TIME		_IOR(RTC_MAGIC, 0x09, struct rtc_time)	/* Read RTC time. */
+#define RTC_SET_TIME		_IOW(RTC_MAGIC, 0x0a, struct rtc_time)	/* Set RTC time. */
+#define RTC_SET_CHARGE  	_IOW(RTC_MAGIC, 0x0b, int) 		
+#define RTC_VLOW_RD     _IOR(RTC_MAGIC, 0x11, int)  /* Voltage Low detector */
+#define RTC_VLOW_SET    _IO(RTC_MAGIC, 0x12)        /* Clear voltage low information */
+#define RTC_MAX_IOCTL 0x12
+
+#endif /* __RTC_H__ */
diff --git a/include/asm-cris/scatterlist.h b/include/asm-cris/scatterlist.h
new file mode 100644
index 000000000000..4bdc44c4ac3d
--- /dev/null
+++ b/include/asm-cris/scatterlist.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_CRIS_SCATTERLIST_H
+#define __ASM_CRIS_SCATTERLIST_H
+
+struct scatterlist {
+	char *  address;    /* Location data is to be transferred to */
+	unsigned int length;
+
+	/* The following is i386 highmem junk - not used by us */
+	struct page * page; /* Location for highmem page, if any */
+	unsigned int offset;/* for highmem, page offset */
+
+};
+
+#define sg_dma_address(sg)	((sg)->address)
+#define sg_dma_len(sg)		((sg)->length)
+/* i386 junk */
+
+#define ISA_DMA_THRESHOLD (0x1fffffff)
+
+#endif /* !(__ASM_CRIS_SCATTERLIST_H) */
diff --git a/include/asm-cris/sections.h b/include/asm-cris/sections.h
new file mode 100644
index 000000000000..2c998ce8967b
--- /dev/null
+++ b/include/asm-cris/sections.h
@@ -0,0 +1,7 @@
+#ifndef _CRIS_SECTIONS_H
+#define _CRIS_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-cris/segment.h b/include/asm-cris/segment.h
new file mode 100644
index 000000000000..c067513beaaf
--- /dev/null
+++ b/include/asm-cris/segment.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+typedef struct {
+  unsigned long seg;
+} mm_segment_t;
+
+#endif
diff --git a/include/asm-cris/semaphore-helper.h b/include/asm-cris/semaphore-helper.h
new file mode 100644
index 000000000000..dbd0f30b85b6
--- /dev/null
+++ b/include/asm-cris/semaphore-helper.h
@@ -0,0 +1,81 @@
+/* $Id: semaphore-helper.h,v 1.3 2001/03/26 15:00:33 orjanf Exp $
+ *
+ * SMP- and interrupt-safe semaphores helper functions. Generic versions, no
+ * optimizations whatsoever... 
+ *
+ */
+
+#ifndef _ASM_SEMAPHORE_HELPER_H
+#define _ASM_SEMAPHORE_HELPER_H
+
+#include <asm/atomic.h>
+#include <linux/errno.h>
+
+#define read(a) ((a)->counter)
+#define inc(a) (((a)->counter)++)
+#define dec(a) (((a)->counter)--)
+
+#define count_inc(a) ((*(a))++)
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+extern inline void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc(&sem->waking);
+}
+
+extern inline int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	local_save_flags(flags);
+	local_irq_disable();
+	if (read(&sem->waking) > 0) {
+		dec(&sem->waking);
+		ret = 1;
+	}
+	local_irq_restore(flags);
+	return ret;
+}
+
+extern inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	local_save_flags(flags);
+	local_irq_disable();
+	if (read(&sem->waking) > 0) {
+		dec(&sem->waking);
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		inc(&sem->count);
+		ret = -EINTR;
+	}
+	local_irq_restore(flags);
+	return ret;
+}
+
+extern inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+        int ret = 1;
+	unsigned long flags;
+
+	local_save_flags(flags);
+	local_irq_disable();
+	if (read(&sem->waking) <= 0)
+		inc(&sem->count);
+	else {
+		dec(&sem->waking);
+		ret = 0;
+	}
+	local_irq_restore(flags);
+	return ret;
+}
+
+#endif /* _ASM_SEMAPHORE_HELPER_H */
+
+
diff --git a/include/asm-cris/semaphore.h b/include/asm-cris/semaphore.h
new file mode 100644
index 000000000000..605aa7eaaaf8
--- /dev/null
+++ b/include/asm-cris/semaphore.h
@@ -0,0 +1,142 @@
+/* $Id: semaphore.h,v 1.3 2001/05/08 13:54:09 bjornw Exp $ */
+
+/* On the i386 these are coded in asm, perhaps we should as well. Later.. */
+
+#ifndef _CRIS_SEMAPHORE_H
+#define _CRIS_SEMAPHORE_H
+
+#define RW_LOCK_BIAS             0x01000000
+
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+/*
+ * CRIS semaphores, implemented in C-only so far. 
+ */
+
+int printk(const char *fmt, ...);
+
+struct semaphore {
+	atomic_t count;
+	atomic_t waking;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.waking		= ATOMIC_INIT(0),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)    \
+}
+
+#define __MUTEX_INITIALIZER(name) \
+        __SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+        struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+extern inline void sema_init(struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+}
+
+extern inline void init_MUTEX (struct semaphore *sem)
+{
+        sema_init(sem, 1);
+}
+
+extern inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+        sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int __down_interruptible(struct semaphore * sem);
+extern int __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+/* notice - we probably can do cli/sti here instead of saving */
+
+extern inline void down(struct semaphore * sem)
+{
+	unsigned long flags;
+	int failed;
+
+	might_sleep();
+
+	/* atomically decrement the semaphores count, and if its negative, we wait */
+	local_save_flags(flags);
+	local_irq_disable();
+	failed = --(sem->count.counter) < 0;
+	local_irq_restore(flags);
+	if(failed) {
+		__down(sem);
+	}
+}
+
+/*
+ * This version waits in interruptible state so that the waiting
+ * process can be killed.  The down_interruptible routine
+ * returns negative for signalled and zero for semaphore acquired.
+ */
+
+extern inline int down_interruptible(struct semaphore * sem)
+{
+	unsigned long flags;
+	int failed;
+
+	might_sleep();
+
+	/* atomically decrement the semaphores count, and if its negative, we wait */
+	local_save_flags(flags);
+	local_irq_disable();
+	failed = --(sem->count.counter) < 0;
+	local_irq_restore(flags);
+	if(failed)
+		failed = __down_interruptible(sem);
+	return(failed);
+}
+
+extern inline int down_trylock(struct semaphore * sem)
+{
+	unsigned long flags;
+	int failed;
+
+	local_save_flags(flags);
+	local_irq_disable();
+	failed = --(sem->count.counter) < 0;
+	local_irq_restore(flags);
+	if(failed)
+		failed = __down_trylock(sem);
+	return(failed);
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+extern inline void up(struct semaphore * sem)
+{  
+	unsigned long flags;
+	int wakeup;
+
+	/* atomically increment the semaphores count, and if it was negative, we wake people */
+	local_save_flags(flags);
+	local_irq_disable();
+	wakeup = ++(sem->count.counter) <= 0;
+	local_irq_restore(flags);
+	if(wakeup) {
+		__up(sem);
+	}
+}
+
+#endif
diff --git a/include/asm-cris/sembuf.h b/include/asm-cris/sembuf.h
new file mode 100644
index 000000000000..7fed9843796d
--- /dev/null
+++ b/include/asm-cris/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _CRIS_SEMBUF_H
+#define _CRIS_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for CRIS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _CRIS_SEMBUF_H */
diff --git a/include/asm-cris/setup.h b/include/asm-cris/setup.h
new file mode 100644
index 000000000000..b90728652d1a
--- /dev/null
+++ b/include/asm-cris/setup.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_SETUP_H
+#define _CRIS_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif
diff --git a/include/asm-cris/shmbuf.h b/include/asm-cris/shmbuf.h
new file mode 100644
index 000000000000..3239e3f000e8
--- /dev/null
+++ b/include/asm-cris/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _CRIS_SHMBUF_H
+#define _CRIS_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for CRIS architecture (same as for i386)
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _CRIS_SHMBUF_H */
diff --git a/include/asm-cris/shmparam.h b/include/asm-cris/shmparam.h
new file mode 100644
index 000000000000..d29d12270687
--- /dev/null
+++ b/include/asm-cris/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_CRIS_SHMPARAM_H
+#define _ASM_CRIS_SHMPARAM_H
+
+/* same as asm-i386/ version.. */
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASM_CRIS_SHMPARAM_H */
diff --git a/include/asm-cris/sigcontext.h b/include/asm-cris/sigcontext.h
new file mode 100644
index 000000000000..a1d634e120df
--- /dev/null
+++ b/include/asm-cris/sigcontext.h
@@ -0,0 +1,24 @@
+/* $Id: sigcontext.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */
+
+#ifndef _ASM_CRIS_SIGCONTEXT_H
+#define _ASM_CRIS_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/* This struct is saved by setup_frame in signal.c, to keep the current context while
+   a signal handler is executed. It's restored by sys_sigreturn.
+   
+   To keep things simple, we use pt_regs here even though normally you just specify
+   the list of regs to save. Then we can use copy_from_user on the entire regs instead
+   of a bunch of get_user's as well...
+
+*/
+
+struct sigcontext {
+	struct pt_regs regs;  /* needs to be first */
+	unsigned long oldmask;
+	unsigned long usp;    /* usp before stacking this gunk on it */
+};
+
+#endif
+
diff --git a/include/asm-cris/siginfo.h b/include/asm-cris/siginfo.h
new file mode 100644
index 000000000000..c1cd6d16928b
--- /dev/null
+++ b/include/asm-cris/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_SIGINFO_H
+#define _CRIS_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-cris/signal.h b/include/asm-cris/signal.h
new file mode 100644
index 000000000000..3f187ec4800a
--- /dev/null
+++ b/include/asm-cris/signal.h
@@ -0,0 +1,188 @@
+#ifndef _ASM_CRIS_SIGNAL_H
+#define _ASM_CRIS_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS          31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+/* here we could define asm-optimized sigaddset, sigdelset etc. operations. 
+ * if we don't, generic ones are used from linux/signal.h
+ */
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-cris/smp.h b/include/asm-cris/smp.h
new file mode 100644
index 000000000000..c2f4feaa041d
--- /dev/null
+++ b/include/asm-cris/smp.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#endif
diff --git a/include/asm-cris/socket.h b/include/asm-cris/socket.h
new file mode 100644
index 000000000000..f159b4f165f7
--- /dev/null
+++ b/include/asm-cris/socket.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+/* almost the same as asm-i386/socket.h */
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP           29
+#define SCM_TIMESTAMP          SO_TIMESTAMP
+
+#define SO_ACCEPTCONN          30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_SOCKET_H */
+
+
diff --git a/include/asm-cris/sockios.h b/include/asm-cris/sockios.h
new file mode 100644
index 000000000000..6c4012f0b29f
--- /dev/null
+++ b/include/asm-cris/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_CRIS_SOCKIOS__
+#define __ARCH_CRIS_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-cris/stat.h b/include/asm-cris/stat.h
new file mode 100644
index 000000000000..9e558cc3c43b
--- /dev/null
+++ b/include/asm-cris/stat.h
@@ -0,0 +1,81 @@
+#ifndef _CRIS_STAT_H
+#define _CRIS_STAT_H
+
+/* Keep this a verbatim copy of i386 version; tweak CRIS-specific bits in
+   the kernel if necessary.  */
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/include/asm-cris/statfs.h b/include/asm-cris/statfs.h
new file mode 100644
index 000000000000..fdaf921844bc
--- /dev/null
+++ b/include/asm-cris/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _CRIS_STATFS_H
+#define _CRIS_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-cris/string.h b/include/asm-cris/string.h
new file mode 100644
index 000000000000..691190e99a27
--- /dev/null
+++ b/include/asm-cris/string.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_CRIS_STRING_H
+#define _ASM_CRIS_STRING_H
+
+/* the optimized memcpy is in arch/cris/lib/string.c */
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, size_t);
+
+/* New and improved.  In arch/cris/lib/memset.c */
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, size_t);
+
+#endif
diff --git a/include/asm-cris/system.h b/include/asm-cris/system.h
new file mode 100644
index 000000000000..e06739806d4e
--- /dev/null
+++ b/include/asm-cris/system.h
@@ -0,0 +1,74 @@
+#ifndef __ASM_CRIS_SYSTEM_H
+#define __ASM_CRIS_SYSTEM_H
+
+#include <asm/arch/system.h>
+
+/* the switch_to macro calls resume, an asm function in entry.S which does the actual
+ * task switching.
+ */
+
+extern struct task_struct *resume(struct task_struct *prev, struct task_struct *next, int);
+#define prepare_to_switch()     do { } while(0)
+#define switch_to(prev,next,last) last = resume(prev,next, \
+					 (int)&((struct task_struct *)0)->thread)
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+#define mb() barrier()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#define smp_read_barrier_depends()     read_barrier_depends()
+#else
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#define smp_read_barrier_depends()     do { } while(0)
+#endif
+
+#define iret()
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+extern inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  /* since Etrax doesn't have any atomic xchg instructions, we need to disable
+     irq's (if enabled) and do it with move.d's */
+  unsigned long flags,temp;
+  local_save_flags(flags); /* save flags, including irq enable bit */
+  local_irq_disable();             /* shut off irq's */
+  switch (size) {
+  case 1:
+    *((unsigned char *)&temp) = x;
+    x = *(unsigned char *)ptr;
+    *(unsigned char *)ptr = *((unsigned char *)&temp);
+    break;
+  case 2:
+    *((unsigned short *)&temp) = x;
+    x = *(unsigned short *)ptr;
+    *(unsigned short *)ptr = *((unsigned short *)&temp);
+    break;
+  case 4:
+    temp = x;
+    x = *(unsigned long *)ptr;
+    *(unsigned long *)ptr = temp;
+    break;
+  }
+  local_irq_restore(flags); /* restore irq enable bit */
+  return x;
+}
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-cris/termbits.h b/include/asm-cris/termbits.h
new file mode 100644
index 000000000000..16d9a491fdb3
--- /dev/null
+++ b/include/asm-cris/termbits.h
@@ -0,0 +1,198 @@
+/* $Id: termbits.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $ */
+
+#ifndef __ARCH_ETRAX100_TERMBITS_H__
+#define __ARCH_ETRAX100_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+/*
+ *     3             2            1
+ *    10 987 654 321 098 765 432 109 876 543 210
+ *                             |           | ||| CBAUD
+ *                                         obaud    
+ *
+ *                                       ||CSIZE
+ *
+ *                                     |CSTOP
+ *                                    |CREAD
+ *                                   |CPARENB
+ *
+ *                                 |CPARODD 
+ *                                |HUPCL
+ *                               |CLOCAL
+ *                             |CBAUDEX
+ *    10 987 654 321 098 765 432 109 876 543 210
+ *        |           || ||   CIBAUD, IBSHIFT=16
+ *                    ibaud
+ *     |CMSPAR
+ *    | CRTSCTS
+ *       x x xxx xxx x     x xx Free bits
+ */
+
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define  B460800 0010004
+/* etrax supports these additional three baud rates */
+#define  B921600   0010005
+#define  B1843200  0010006
+#define  B6250000  0010007
+/* etrax 200 supports this as well */
+#define  B12500000 0010010
+#define CIBAUD	  002003600000	/* input baud rate (used in v32) */
+/* The values for CIBAUD bits are the same as the values for CBAUD and CBAUDEX
+ * shifted left IBSHIFT bits.
+ */
+#define IBSHIFT   16
+#define CMSPAR    010000000000 /* mark or space (stick) parity - PARODD=space*/
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/include/asm-cris/termios.h b/include/asm-cris/termios.h
new file mode 100644
index 000000000000..5ce1023c5d7b
--- /dev/null
+++ b/include/asm-cris/termios.h
@@ -0,0 +1,107 @@
+#ifndef _CRIS_TERMIOS_H
+#define _CRIS_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+#include <asm/rs485.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_BT		15	/* bluetooth */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _CRIS_TERMIOS_H */
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
new file mode 100644
index 000000000000..53193feb0826
--- /dev/null
+++ b/include/asm-cris/thread_info.h
@@ -0,0 +1,101 @@
+/* thread_info.h: CRIS low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ * 
+ * CRIS port by Axis Communications
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/processor.h>
+#include <asm/arch/thread_info.h>
+#include <asm/segment.h>
+#endif
+
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block    restart_block;
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		= &tsk,				\
+	.exec_domain	= &default_exec_domain,		\
+	.flags		= 0,				\
+	.cpu		= 0,				\
+	.preempt_count	= 1,				\
+	.addr_limit	= KERNEL_DS,			\
+	.restart_block = {				\
+		       .fn = do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-cris/timex.h b/include/asm-cris/timex.h
new file mode 100644
index 000000000000..375c41af47de
--- /dev/null
+++ b/include/asm-cris/timex.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-cris/timex.h
+ *
+ * CRIS architecture timex specifications
+ */
+
+#ifndef _ASM_CRIS_TIMEX_H
+#define _ASM_CRIS_TIMEX_H
+
+#include <asm/arch/timex.h>
+
+/*
+ * We don't have a cycle-counter.. but we do not support SMP anyway where this is
+ * used so it does not matter.
+ */
+
+typedef unsigned int cycles_t;
+
+extern inline cycles_t get_cycles(void)
+{
+        return 0;
+}
+
+#endif
diff --git a/include/asm-cris/tlb.h b/include/asm-cris/tlb.h
new file mode 100644
index 000000000000..6cc26debe40f
--- /dev/null
+++ b/include/asm-cris/tlb.h
@@ -0,0 +1,17 @@
+#ifndef _CRIS_TLB_H
+#define _CRIS_TLB_H
+
+#include <asm/arch/tlb.h>
+
+/*
+ * cris doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/include/asm-cris/tlbflush.h b/include/asm-cris/tlbflush.h
new file mode 100644
index 000000000000..1781fe1a32f6
--- /dev/null
+++ b/include/asm-cris/tlbflush.h
@@ -0,0 +1,43 @@
+#ifndef _CRIS_TLBFLUSH_H
+#define _CRIS_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+
+/*
+ * TLB flushing (implemented in arch/cris/mm/tlb.c):
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, 
+			   unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma,
+			    unsigned long start,
+			    unsigned long end);
+
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+                                      unsigned long start, unsigned long end)
+{
+        /* CRIS does not keep any page table caches in TLB */
+}
+
+
+extern inline void flush_tlb(void) 
+{
+	flush_tlb_mm(current->mm);
+}
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#endif /* _CRIS_TLBFLUSH_H */
diff --git a/include/asm-cris/topology.h b/include/asm-cris/topology.h
new file mode 100644
index 000000000000..2ac613d32a89
--- /dev/null
+++ b/include/asm-cris/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CRIS_TOPOLOGY_H
+#define _ASM_CRIS_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_CRIS_TOPOLOGY_H */
diff --git a/include/asm-cris/types.h b/include/asm-cris/types.h
new file mode 100644
index 000000000000..41a0d450ba1d
--- /dev/null
+++ b/include/asm-cris/types.h
@@ -0,0 +1,61 @@
+#ifndef _ETRAX_TYPES_H
+#define _ETRAX_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide, just like our other addresses.  */
+ 
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-cris/uaccess.h b/include/asm-cris/uaccess.h
new file mode 100644
index 000000000000..6db17221fd9e
--- /dev/null
+++ b/include/asm-cris/uaccess.h
@@ -0,0 +1,446 @@
+/* 
+ * Authors:    Bjorn Wesen (bjornw@axis.com)
+ *	       Hans-Peter Nilsson (hp@axis.com)
+ *
+ * $Log: uaccess.h,v $
+ * Revision 1.8  2001/10/29 13:01:48  bjornw
+ * Removed unused variable tmp2 in strnlen_user
+ *
+ * Revision 1.7  2001/10/02 12:44:52  hp
+ * Add support for 64-bit put_user/get_user
+ *
+ * Revision 1.6  2001/10/01 14:51:17  bjornw
+ * Added register prefixes and removed underscores
+ *
+ * Revision 1.5  2000/10/25 03:33:21  hp
+ * - Provide implementation for everything else but get_user and put_user;
+ *   copying inline to/from user for constant length 0..16, 20, 24, and
+ *   clearing for 0..4, 8, 12, 16, 20, 24, strncpy_from_user and strnlen_user
+ *   always inline.
+ * - Constraints for destination addr in get_user cannot be memory, only reg.
+ * - Correct labels for PC at expected fault points.
+ * - Nits with assembly code.
+ * - Don't use statement expressions without value; use "do {} while (0)".
+ * - Return correct values from __generic_... functions.
+ *
+ * Revision 1.4  2000/09/12 16:28:25  bjornw
+ * * Removed comments from the get/put user asm code
+ * * Constrains for destination addr in put_user cannot be memory, only reg
+ *
+ * Revision 1.3  2000/09/12 14:30:20  bjornw
+ * MAX_ADDR_USER does not exist anymore
+ *
+ * Revision 1.2  2000/07/13 15:52:48  bjornw
+ * New user-access functions
+ *
+ * Revision 1.1.1.1  2000/07/10 16:32:31  bjornw
+ * CRIS architecture, working draft
+ *
+ *
+ *
+ */
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+   satisfactory results for "gcc version 2.96 20000427 (experimental)".
+
+   Check regularly...
+
+   Register $r9 is chosen for temporaries, being a call-clobbered register
+   first in line to be used (notably for local blocks), not colliding with
+   parameter registers.  */
+
+#ifndef _CRIS_UACCESS_H
+#define _CRIS_UACCESS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+/* addr_limit is the maximum accessible address for the task. we misuse
+ * the KERNEL_DS and USER_DS values to both assign and compare the 
+ * addr_limit values through the equally misnamed get/set_fs macros.
+ * (see above)
+ */
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
+#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
+#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+
+#include <asm/arch/uaccess.h>
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on
+ * CRIS, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ */
+#define get_user(x,ptr) \
+  __get_user_check((x),(ptr),sizeof(*(ptr)))
+#define put_user(x,ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+extern long __put_user_bad(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __put_user_asm(x,ptr,retval,"move.b"); break;	\
+	  case 2: __put_user_asm(x,ptr,retval,"move.w"); break;	\
+	  case 4: __put_user_asm(x,ptr,retval,"move.d"); break;	\
+	  case 8: __put_user_asm_64(x,ptr,retval); break;	\
+	  default: __put_user_bad();				\
+	}							\
+} while (0)
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __get_user_asm(x,ptr,retval,"move.b"); break;	\
+	  case 2: __get_user_asm(x,ptr,retval,"move.w"); break;	\
+	  case 4: __get_user_asm(x,ptr,retval,"move.d"); break;	\
+	  case 8: __get_user_asm_64(x,ptr,retval); break;	\
+	  default: (x) = __get_user_bad();			\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x,ptr,size)			\
+({							\
+	long __pu_err;					\
+	__put_user_size((x),(ptr),(size),__pu_err);	\
+	__pu_err;					\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) *__pu_addr = (ptr);			\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))		\
+		__put_user_size((x),__pu_addr,(size),__pu_err);	\
+	__pu_err;						\
+})
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err, __gu_val;				\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT, __gu_val = 0;				\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (access_ok(VERIFY_READ,__gu_addr,size))			\
+		__get_user_size(__gu_val,__gu_addr,(size),__gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+/* More complex functions.  Most are inline, but some call functions that
+   live in lib/usercopy.c  */
+
+extern unsigned long __copy_user(void *to, const void *from, unsigned long n);
+extern unsigned long __copy_user_zeroing(void *to, const void *from, unsigned long n);
+extern unsigned long __do_clear_user(void *to, unsigned long n);
+
+extern inline unsigned long
+__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_user(to,from,n);
+	return n;
+}
+
+extern inline unsigned long
+__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_user_zeroing(to,from,n);
+	return n;
+}
+
+extern inline unsigned long
+__generic_clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __do_clear_user(to,n);
+	return n;
+}
+
+extern inline long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	return __do_strncpy_from_user(dst, src, count);
+}
+
+extern inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __do_strncpy_from_user(dst, src, count);
+	return res;
+}
+
+
+/* Note that if these expand awfully if made into switch constructs, so
+   don't do that.  */
+
+extern inline unsigned long
+__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long ret = 0;
+	if (n == 0)
+		;
+	else if (n == 1)
+		__asm_copy_from_user_1(to, from, ret);
+	else if (n == 2)
+		__asm_copy_from_user_2(to, from, ret);
+	else if (n == 3)
+		__asm_copy_from_user_3(to, from, ret);
+	else if (n == 4)
+		__asm_copy_from_user_4(to, from, ret);
+	else if (n == 5)
+		__asm_copy_from_user_5(to, from, ret);
+	else if (n == 6)
+		__asm_copy_from_user_6(to, from, ret);
+	else if (n == 7)
+		__asm_copy_from_user_7(to, from, ret);
+	else if (n == 8)
+		__asm_copy_from_user_8(to, from, ret);
+	else if (n == 9)
+		__asm_copy_from_user_9(to, from, ret);
+	else if (n == 10)
+		__asm_copy_from_user_10(to, from, ret);
+	else if (n == 11)
+		__asm_copy_from_user_11(to, from, ret);
+	else if (n == 12)
+		__asm_copy_from_user_12(to, from, ret);
+	else if (n == 13)
+		__asm_copy_from_user_13(to, from, ret);
+	else if (n == 14)
+		__asm_copy_from_user_14(to, from, ret);
+	else if (n == 15)
+		__asm_copy_from_user_15(to, from, ret);
+	else if (n == 16)
+		__asm_copy_from_user_16(to, from, ret);
+	else if (n == 20)
+		__asm_copy_from_user_20(to, from, ret);
+	else if (n == 24)
+		__asm_copy_from_user_24(to, from, ret);
+	else
+		ret = __generic_copy_from_user(to, from, n);
+
+	return ret;
+}
+
+/* Ditto, don't make a switch out of this.  */
+
+extern inline unsigned long
+__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long ret = 0;
+	if (n == 0)
+		;
+	else if (n == 1)
+		__asm_copy_to_user_1(to, from, ret);
+	else if (n == 2)
+		__asm_copy_to_user_2(to, from, ret);
+	else if (n == 3)
+		__asm_copy_to_user_3(to, from, ret);
+	else if (n == 4)
+		__asm_copy_to_user_4(to, from, ret);
+	else if (n == 5)
+		__asm_copy_to_user_5(to, from, ret);
+	else if (n == 6)
+		__asm_copy_to_user_6(to, from, ret);
+	else if (n == 7)
+		__asm_copy_to_user_7(to, from, ret);
+	else if (n == 8)
+		__asm_copy_to_user_8(to, from, ret);
+	else if (n == 9)
+		__asm_copy_to_user_9(to, from, ret);
+	else if (n == 10)
+		__asm_copy_to_user_10(to, from, ret);
+	else if (n == 11)
+		__asm_copy_to_user_11(to, from, ret);
+	else if (n == 12)
+		__asm_copy_to_user_12(to, from, ret);
+	else if (n == 13)
+		__asm_copy_to_user_13(to, from, ret);
+	else if (n == 14)
+		__asm_copy_to_user_14(to, from, ret);
+	else if (n == 15)
+		__asm_copy_to_user_15(to, from, ret);
+	else if (n == 16)
+		__asm_copy_to_user_16(to, from, ret);
+	else if (n == 20)
+		__asm_copy_to_user_20(to, from, ret);
+	else if (n == 24)
+		__asm_copy_to_user_24(to, from, ret);
+	else
+		ret = __generic_copy_to_user(to, from, n);
+
+	return ret;
+}
+
+/* No switch, please.  */
+
+extern inline unsigned long
+__constant_clear_user(void __user *to, unsigned long n)
+{
+	unsigned long ret = 0;
+	if (n == 0)
+		;
+	else if (n == 1)
+		__asm_clear_1(to, ret);
+	else if (n == 2)
+		__asm_clear_2(to, ret);
+	else if (n == 3)
+		__asm_clear_3(to, ret);
+	else if (n == 4)
+		__asm_clear_4(to, ret);
+	else if (n == 8)
+		__asm_clear_8(to, ret);
+	else if (n == 12)
+		__asm_clear_12(to, ret);
+	else if (n == 16)
+		__asm_clear_16(to, ret);
+	else if (n == 20)
+		__asm_clear_20(to, ret);
+	else if (n == 24)
+		__asm_clear_24(to, ret);
+	else
+		ret = __generic_clear_user(to, n);
+
+	return ret;
+}
+
+
+#define clear_user(to, n)			\
+(__builtin_constant_p(n) ?			\
+ __constant_clear_user(to, n) :			\
+ __generic_clear_user(to, n))
+
+#define copy_from_user(to, from, n)		\
+(__builtin_constant_p(n) ?			\
+ __constant_copy_from_user(to, from, n) :	\
+ __generic_copy_from_user(to, from, n))
+
+#define copy_to_user(to, from, n)		\
+(__builtin_constant_p(n) ?			\
+ __constant_copy_to_user(to, from, n) :		\
+ __generic_copy_to_user(to, from, n))
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+
+extern inline unsigned long
+__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
+{
+	return __copy_user_zeroing(to,from,n);
+}
+
+extern inline unsigned long
+__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
+{
+	return __copy_user(to,from,n);
+}
+
+extern inline unsigned long
+__generic_clear_user_nocheck(void *to, unsigned long n)
+{
+	return __do_clear_user(to,n);
+}
+
+/* without checking */
+
+#define __copy_to_user(to,from,n)   __generic_copy_to_user_nocheck((to),(from),(n))
+#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n))
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+#define __clear_user(to,n) __generic_clear_user_nocheck((to),(n))
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+
+#endif	/* _CRIS_UACCESS_H */
diff --git a/include/asm-cris/ucontext.h b/include/asm-cris/ucontext.h
new file mode 100644
index 000000000000..eed6ad5eb3f2
--- /dev/null
+++ b/include/asm-cris/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_CRIS_UCONTEXT_H
+#define _ASM_CRIS_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_CRIS_UCONTEXT_H */
diff --git a/include/asm-cris/unaligned.h b/include/asm-cris/unaligned.h
new file mode 100644
index 000000000000..7fbbb399f6f1
--- /dev/null
+++ b/include/asm-cris/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef __CRIS_UNALIGNED_H
+#define __CRIS_UNALIGNED_H
+
+/*
+ * CRIS can do unaligned accesses itself. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h
new file mode 100644
index 000000000000..e80bf276b101
--- /dev/null
+++ b/include/asm-cris/unistd.h
@@ -0,0 +1,392 @@
+#ifndef _ASM_CRIS_UNISTD_H_
+#define _ASM_CRIS_UNISTD_H_
+
+#include <asm/arch/unistd.h>
+
+/*
+ * This file contains the system call numbers, and stub macros for libc.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid             224
+#define __NR_readahead          225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+ 
+#define NR_syscalls 283
+
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+extern inline _syscall0(pid_t,setsid)
+extern inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+extern inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+extern inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+extern inline _syscall1(int,dup,int,fd)
+extern inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+extern inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+extern inline _syscall1(int,close,int,fd)
+
+struct pt_regs;
+asmlinkage long sys_mmap2(
+			unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(const char *fname, char **argv, char **envp,
+			long r13, long mof, long srp, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,
+			int* parent_tid, int* child_tid, long mof, long srp,
+			struct pt_regs *regs);
+asmlinkage int sys_fork(long r10, long r11, long r12, long r13,
+			long mof, long srp, struct pt_regs *regs);
+asmlinkage int sys_vfork(long r10, long r11, long r12, long r13,
+			long mof, long srp, struct pt_regs *regs);
+asmlinkage int sys_pipe(unsigned long __user *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+/*
+ * Since we define it "external", it collides with the built-in
+ * definition, which has the "noreturn" attribute and will cause
+ * complaints.  We don't want to use -fno-builtin, so just use a
+ * different name when in the kernel.
+ */
+#ifdef __KERNEL__
+#define _exit kernel_syscall_exit
+#endif
+extern inline _syscall1(int,_exit,int,exitcode)
+extern inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+#endif
+
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _ASM_CRIS_UNISTD_H_ */
diff --git a/include/asm-cris/user.h b/include/asm-cris/user.h
new file mode 100644
index 000000000000..2538e2a003df
--- /dev/null
+++ b/include/asm-cris/user.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_CRIS_USER_H
+#define __ASM_CRIS_USER_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/arch/user.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+        
+struct user {
+	struct user_regs_struct	regs;		/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_CRIS_USER_H */
diff --git a/include/asm-frv/a.out.h b/include/asm-frv/a.out.h
new file mode 100644
index 000000000000..dd3b7e5754c9
--- /dev/null
+++ b/include/asm-frv/a.out.h
@@ -0,0 +1,5 @@
+/*
+ * FRV doesn't do AOUT format. This header file should be removed as
+ * soon as fs/exec.c and fs/proc/kcore.c and the archs that require
+ * them to include linux/a.out.h are fixed.
+ */
diff --git a/include/asm-frv/atomic.h b/include/asm-frv/atomic.h
new file mode 100644
index 000000000000..e75968463428
--- /dev/null
+++ b/include/asm-frv/atomic.h
@@ -0,0 +1,417 @@
+/* atomic.h: atomic operation emulation for FR-V
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/fujitsu/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/spr-regs.h>
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * We do not have SMP systems, so we don't have to deal with that.
+ */
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+typedef struct {
+	int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = (i))
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long val;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	add%I2		%1,%2,%1		\n"
+	    "	cst.p		%1,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    : "+U"(v->counter), "=&r"(val)
+	    : "NPr"(i)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long val;
+
+	asm("0:						\n"
+	    "	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+	    "	ckeq		icc3,cc7		\n"
+	    "	ld.p		%M0,%1			\n"	/* LD.P/ORCR must be atomic */
+	    "	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+	    "	sub%I2		%1,%2,%1		\n"
+	    "	cst.p		%1,%M0		,cc3,#1	\n"
+	    "	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* clear ICC3.Z if store happens */
+	    "	beq		icc3,#0,0b		\n"
+	    : "+U"(v->counter), "=&r"(val)
+	    : "NPr"(i)
+	    : "memory", "cc7", "cc3", "icc3"
+	    );
+
+	return val;
+}
+
+#else
+
+extern int atomic_add_return(int i, atomic_t *v);
+extern int atomic_sub_return(int i, atomic_t *v);
+
+#endif
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+	atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+	atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline
+unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	and%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(~mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+static inline
+unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	or%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+static inline
+unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v)
+{
+	unsigned long old, tmp;
+
+	asm volatile(
+		"0:						\n"
+		"	orcc		gr0,gr0,gr0,icc3	\n"	/* set ICC3.Z */
+		"	ckeq		icc3,cc7		\n"
+		"	ld.p		%M0,%1			\n"	/* LD.P/ORCR are atomic */
+		"	orcr		cc7,cc7,cc3		\n"	/* set CC3 to true */
+		"	xor%I3		%1,%3,%2		\n"
+		"	cst.p		%2,%M0		,cc3,#1	\n"	/* if store happens... */
+		"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	/* ... clear ICC3.Z */
+		"	beq		icc3,#0,0b		\n"
+		: "+U"(*v), "=&r"(old), "=r"(tmp)
+		: "NPr"(mask)
+		: "memory", "cc7", "cc3", "icc3"
+		);
+
+	return old;
+}
+
+#else
+
+extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
+
+#endif
+
+#define atomic_clear_mask(mask, v)	atomic_test_and_ANDNOT_mask((mask), (v))
+#define atomic_set_mask(mask, v)	atomic_test_and_OR_mask((mask), (v))
+
+/*****************************************************************************/
+/*
+ * exchange value with memory
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define xchg(ptr, x)								\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig;						\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 1:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	ldub.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	cstb.p		%2,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig)			\
+			: "r"(x)						\
+			: "memory", "cc7", "cc3", "icc3"			\
+			);							\
+		break;								\
+										\
+	case 2:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	lduh.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	csth.p		%2,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig)			\
+			: "r"(x)						\
+			: "memory", "cc7", "cc3", "icc3"			\
+			);							\
+		break;								\
+										\
+	case 4:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	ld.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	cst.p		%2,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig)			\
+			: "r"(x)						\
+			: "memory", "cc7", "cc3", "icc3"			\
+			);							\
+		break;								\
+										\
+	default:								\
+		__xg_orig = 0;							\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#else
+
+extern uint8_t  __xchg_8 (uint8_t i,  volatile void *v);
+extern uint16_t __xchg_16(uint16_t i, volatile void *v);
+extern uint32_t __xchg_32(uint32_t i, volatile void *v);
+
+#define xchg(ptr, x)										\
+({												\
+	__typeof__(ptr) __xg_ptr = (ptr);							\
+	__typeof__(*(ptr)) __xg_orig;								\
+												\
+	switch (sizeof(__xg_orig)) {								\
+	case 1: __xg_orig = (__typeof__(*(ptr))) __xchg_8 ((uint8_t)  x, __xg_ptr);	break;	\
+	case 2: __xg_orig = (__typeof__(*(ptr))) __xchg_16((uint16_t) x, __xg_ptr);	break;	\
+	case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr);	break;	\
+	default:										\
+		__xg_orig = 0;									\
+		asm volatile("break");								\
+		break;										\
+	}											\
+	__xg_orig;										\
+})
+
+#endif
+
+#define tas(ptr) (xchg((ptr), 1))
+
+/*****************************************************************************/
+/*
+ * compare and conditionally exchange value with memory
+ * - if (*ptr == test) then orig = *ptr; *ptr = test;
+ * - if (*ptr != test) then orig = *ptr;
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define cmpxchg(ptr, test, new)							\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig, __xg_tmp;					\
+	__typeof__(*(ptr)) __xg_test = (test);					\
+	__typeof__(*(ptr)) __xg_new = (new);					\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 1:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	ldub.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	sub%I4		%1,%4,%2		\n"	\
+			"	sllcc		%2,#24,gr0,icc0		\n"	\
+			"	bne		icc0,#0,1f		\n"	\
+			"	cstb.p		%3,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			"1:						\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp)	\
+			: "r"(__xg_new), "NPr"(__xg_test)			\
+			: "memory", "cc7", "cc3", "icc3", "icc0"		\
+			);							\
+		break;								\
+										\
+	case 2:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	lduh.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	sub%I4		%1,%4,%2		\n"	\
+			"	sllcc		%2,#16,gr0,icc0		\n"	\
+			"	bne		icc0,#0,1f		\n"	\
+			"	csth.p		%3,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			"1:						\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp)	\
+			: "r"(__xg_new), "NPr"(__xg_test)			\
+			: "memory", "cc7", "cc3", "icc3", "icc0"		\
+			);							\
+		break;								\
+										\
+	case 4:									\
+		asm volatile(							\
+			"0:						\n"	\
+			"	orcc		gr0,gr0,gr0,icc3	\n"	\
+			"	ckeq		icc3,cc7		\n"	\
+			"	ld.p		%M0,%1			\n"	\
+			"	orcr		cc7,cc7,cc3		\n"	\
+			"	sub%I4cc	%1,%4,%2,icc0		\n"	\
+			"	bne		icc0,#0,1f		\n"	\
+			"	cst.p		%3,%M0		,cc3,#1	\n"	\
+			"	corcc		gr29,gr29,gr0	,cc3,#1	\n"	\
+			"	beq		icc3,#0,0b		\n"	\
+			"1:						\n"	\
+			: "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp)	\
+			: "r"(__xg_new), "NPr"(__xg_test)			\
+			: "memory", "cc7", "cc3", "icc3", "icc0"		\
+			);							\
+		break;								\
+										\
+	default:								\
+		__xg_orig = 0;							\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#else
+
+extern uint8_t  __cmpxchg_8 (uint8_t *v,  uint8_t test,  uint8_t new);
+extern uint16_t __cmpxchg_16(uint16_t *v, uint16_t test, uint16_t new);
+extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
+
+#define cmpxchg(ptr, test, new)							\
+({										\
+	__typeof__(ptr) __xg_ptr = (ptr);					\
+	__typeof__(*(ptr)) __xg_orig;						\
+	__typeof__(*(ptr)) __xg_test = (test);					\
+	__typeof__(*(ptr)) __xg_new = (new);					\
+										\
+	switch (sizeof(__xg_orig)) {						\
+	case 1: __xg_orig = __cmpxchg_8 (__xg_ptr, __xg_test, __xg_new); break;	\
+	case 2: __xg_orig = __cmpxchg_16(__xg_ptr, __xg_test, __xg_new); break;	\
+	case 4: __xg_orig = __cmpxchg_32(__xg_ptr, __xg_test, __xg_new); break;	\
+	default:								\
+		__xg_orig = 0;							\
+		asm volatile("break");						\
+		break;								\
+	}									\
+										\
+	__xg_orig;								\
+})
+
+#endif
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/include/asm-frv/ax88796.h b/include/asm-frv/ax88796.h
new file mode 100644
index 000000000000..637e980393c5
--- /dev/null
+++ b/include/asm-frv/ax88796.h
@@ -0,0 +1,22 @@
+/* ax88796.h: access points to the driver for the AX88796 NE2000 clone
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_AX88796_H
+#define _ASM_AX88796_H
+
+#include <asm/mb-regs.h>
+
+#define AX88796_IOADDR		(__region_CS1 + 0x200)
+#define AX88796_IRQ		IRQ_CPU_EXTERNAL7
+#define AX88796_FULL_DUPLEX	0			/* force full duplex */
+#define AX88796_BUS_INFO	"CS1#+0x200"		/* bus info for ethtool */
+
+#endif /* _ASM_AX88796_H */
diff --git a/include/asm-frv/bitops.h b/include/asm-frv/bitops.h
new file mode 100644
index 000000000000..b664bd5b6663
--- /dev/null
+++ b/include/asm-frv/bitops.h
@@ -0,0 +1,341 @@
+/* bitops.h: bit operations for the Fujitsu FR-V CPUs
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/fujitsu/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+#ifdef __KERNEL__
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while (word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+	volatile unsigned long *ptr = addr;
+	unsigned long mask = 1UL << (nr & 31);
+	ptr += nr >> 5;
+	return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+	test_and_clear_bit(nr, addr);
+}
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+	test_and_set_bit(nr, addr);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+	test_and_change_bit(nr, addr);
+}
+
+static inline void __clear_bit(int nr, volatile void * addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a &= ~mask;
+}
+
+static inline void __set_bit(int nr, volatile void * addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a |= mask;
+}
+
+static inline void __change_bit(int nr, volatile void *addr)
+{
+	volatile unsigned long *a = addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	*a ^= mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	return retval;
+}
+
+static inline int __test_and_set_bit(int nr, volatile void * addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	return retval;
+}
+
+static inline int __test_and_change_bit(int nr, volatile void * addr)
+{
+	volatile unsigned long *a = addr;
+	int mask, retval;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 31);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __constant_test_bit(int nr, const volatile void * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(int nr, const volatile void * addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+extern int find_next_bit(const unsigned long *addr, int size, int offset);
+
+#define find_first_bit(addr, size) find_next_bit(addr, size, 0)
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+
+static inline int find_next_zero_bit(const void *addr, int size, int offset)
+{
+	const unsigned long *p = ((const unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL >> size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define ffs(x) generic_ffs(x)
+#define __ffs(x) (ffs(x) - 1)
+
+/*
+ * fls: find last bit set.
+ */
+#define fls(x)						\
+({							\
+	int bit;					\
+							\
+	asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x));	\
+							\
+	bit ? 33 - bit : bit;				\
+})
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#define ext2_set_bit(nr, addr)		test_and_set_bit  ((nr) ^ 0x18, (addr))
+#define ext2_clear_bit(nr, addr)	test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#define ext2_set_bit_atomic(lock,nr,addr)	ext2_set_bit((nr), addr)
+#define ext2_clear_bit_atomic(lock,nr,addr)	ext2_clear_bit((nr), addr)
+
+static inline int ext2_test_bit(int nr, const volatile void * addr)
+{
+	const volatile unsigned char *ADDR = (const unsigned char *) addr;
+	int mask;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static inline unsigned long ext2_find_next_zero_bit(const void *addr,
+						    unsigned long size,
+						    unsigned long offset)
+{
+	const unsigned long *p = ((const unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)		ext2_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)			ext2_set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	ext2_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr)			ext2_test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	ext2_find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/include/asm-frv/bug.h b/include/asm-frv/bug.h
new file mode 100644
index 000000000000..011860b28818
--- /dev/null
+++ b/include/asm-frv/bug.h
@@ -0,0 +1,51 @@
+/* bug.h: FRV bug trapping
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+#include <linux/config.h>
+
+/*
+ * Tell the user there is some problem.
+ */
+extern asmlinkage void __debug_bug_trap(int signr);
+
+#ifdef CONFIG_NO_KERNEL_MSG
+#define	_debug_bug_printk()
+#else
+extern void __debug_bug_printk(const char *file, unsigned line);
+#define	_debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__)
+#endif
+
+#define _debug_bug_trap(signr)			\
+do {						\
+	__debug_bug_trap(signr);		\
+	asm volatile("nop");			\
+} while(0)
+
+#define HAVE_ARCH_BUG
+#define BUG()					\
+do {						\
+	_debug_bug_printk();			\
+	_debug_bug_trap(6 /*SIGABRT*/);		\
+} while (0)
+
+#ifdef CONFIG_GDBSTUB
+#define HAVE_ARCH_KGDB_RAISE
+#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0)
+
+#define HAVE_ARCH_KGDB_BAD_PAGE
+#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-frv/bugs.h b/include/asm-frv/bugs.h
new file mode 100644
index 000000000000..f2382be2b46c
--- /dev/null
+++ b/include/asm-frv/bugs.h
@@ -0,0 +1,14 @@
+/* bugs.h: arch bug checking entry
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void check_bugs(void)
+{
+}
diff --git a/include/asm-frv/busctl-regs.h b/include/asm-frv/busctl-regs.h
new file mode 100644
index 000000000000..bb0ff4816e27
--- /dev/null
+++ b/include/asm-frv/busctl-regs.h
@@ -0,0 +1,41 @@
+/* busctl-regs.h: FR400-series CPU bus controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+/* bus controller registers */
+#define __get_LGCR()	({ *(volatile unsigned long *)(0xfe000010); })
+#define __get_LMAICR()	({ *(volatile unsigned long *)(0xfe000030); })
+#define __get_LEMBR()	({ *(volatile unsigned long *)(0xfe000040); })
+#define __get_LEMAM()	({ *(volatile unsigned long *)(0xfe000048); })
+#define __get_LCR(R)	({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); })
+#define __get_LSBR(R)	({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); })
+#define __get_LSAM(R)	({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); })
+
+#define __set_LGCR(V)	do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0)
+#define __set_LMAICR(V)	do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0)
+#define __set_LEMBR(V)	do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0)
+#define __set_LEMAM(V)	do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0)
+#define __set_LCR(R,V)	do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0)
+#define __set_LSBR(R,V)	do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0)
+#define __set_LSAM(R,V)	do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0)
+
+/* FR401 SDRAM controller registers */
+#define __get_DBR(R)	({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); })
+#define __get_DAM(R)	({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); })
+
+/* FR551 SDRAM controller registers */
+#define __get_DARS(R)	({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); })
+#define __get_DAMK(R)	({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); })
+
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/include/asm-frv/byteorder.h b/include/asm-frv/byteorder.h
new file mode 100644
index 000000000000..411bec3cc1fc
--- /dev/null
+++ b/include/asm-frv/byteorder.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-frv/cache.h b/include/asm-frv/cache.h
new file mode 100644
index 000000000000..cf69b6373b34
--- /dev/null
+++ b/include/asm-frv/cache.h
@@ -0,0 +1,24 @@
+/* cache.h: FRV cache definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+#include <linux/config.h>
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT		(CONFIG_FRV_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned	__attribute__((aligned(L1_CACHE_BYTES)))
+#define ____cacheline_aligned	__attribute__((aligned(L1_CACHE_BYTES)))
+
+#endif
diff --git a/include/asm-frv/cacheflush.h b/include/asm-frv/cacheflush.h
new file mode 100644
index 000000000000..3007deccb490
--- /dev/null
+++ b/include/asm-frv/cacheflush.h
@@ -0,0 +1,91 @@
+/* cacheflush.h: FRV cache flushing routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all()			do {} while(0)
+#define flush_cache_mm(mm)			do {} while(0)
+#define flush_cache_range(mm, start, end)	do {} while(0)
+#define flush_cache_page(vma, vmaddr, pfn)	do {} while(0)
+#define flush_cache_vmap(start, end)		do {} while(0)
+#define flush_cache_vunmap(start, end)		do {} while(0)
+#define flush_dcache_mmap_lock(mapping)		do {} while(0)
+#define flush_dcache_mmap_unlock(mapping)	do {} while(0)
+
+/*
+ * physically-indexed cache managment
+ * - see arch/frv/lib/cache.S
+ */
+extern void frv_dcache_writeback(unsigned long start, unsigned long size);
+extern void frv_cache_invalidate(unsigned long start, unsigned long size);
+extern void frv_icache_invalidate(unsigned long start, unsigned long size);
+extern void frv_cache_wback_inv(unsigned long start, unsigned long size);
+
+static inline void __flush_cache_all(void)
+{
+	asm volatile("	dcef	@(gr0,gr0),#1	\n"
+		     "	icei	@(gr0,gr0),#1	\n"
+		     "	membar			\n"
+		     : : : "memory"
+		     );
+}
+
+/* dcache/icache coherency... */
+#ifdef CONFIG_MMU
+extern void flush_dcache_page(struct page *page);
+#else
+static inline void flush_dcache_page(struct page *page)
+{
+	unsigned long addr = page_to_phys(page);
+	frv_dcache_writeback(addr, addr + PAGE_SIZE);
+}
+#endif
+
+static inline void flush_page_to_ram(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+static inline void flush_icache(void)
+{
+	__flush_cache_all();
+}
+
+static inline void flush_icache_range(unsigned long start, unsigned long end)
+{
+	frv_cache_wback_inv(start, end);
+}
+
+#ifdef CONFIG_MMU
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+				    unsigned long start, unsigned long len);
+#else
+static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+					   unsigned long start, unsigned long len)
+{
+	frv_cache_wback_inv(start, start + len);
+}
+#endif
+
+static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+	flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
+}
+
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h
new file mode 100644
index 000000000000..10236f6802db
--- /dev/null
+++ b/include/asm-frv/checksum.h
@@ -0,0 +1,183 @@
+/* checksum.h: FRV checksumming
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+unsigned int csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+						int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+	unsigned int tmp, inc, sum = 0;
+
+	asm("	addcc		gr0,gr0,gr0,icc0\n" /* clear icc0.C */
+	    "	subi		%1,#4,%1	\n"
+	    "0:					\n"
+	    "	ldu.p		@(%1,%3),%4	\n"
+	    "	subicc		%2,#1,%2,icc1	\n"
+	    "	addxcc.p	%4,%0,%0,icc0	\n"
+	    "	bhi		icc1,#2,0b	\n"
+
+	    /* fold the 33-bit result into 16-bits */
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+
+	    : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
+	    : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
+	    "m"(*(volatile struct { int _[100]; } *)iph)
+	    : "icc0", "icc1"
+	    );
+
+	return ~sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int tmp;
+
+	asm("	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+	    : "=r"(sum), "=&r"(tmp)
+	    : "0"(sum)
+	    );
+
+	return ~sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	asm("	addcc		%1,%0,%0,icc0	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	addxcc		%3,%0,%0,icc0	\n"
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    : "=r" (sum)
+	    : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum)
+	    : "icc0"
+	    );
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern unsigned short ip_compute_csum(const unsigned char * buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
+		__u32 len, unsigned short proto, unsigned int sum)
+{
+	unsigned long tmp, tmp2;
+
+	asm("	addcc		%2,%0,%0,icc0	\n"
+
+	    /* add up the source addr */
+	    "	ldi		@(%3,0),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%3,4),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	ldi		@(%3,8),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%3,12),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+
+	    /* add up the dest addr */
+	    "	ldi		@(%4,0),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%4,4),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+	    "	ldi		@(%4,8),%1	\n"
+	    "	addxcc		%1,%0,%0,icc0	\n"
+	    "	ldi		@(%4,12),%2	\n"
+	    "	addxcc		%2,%0,%0,icc0	\n"
+
+	    /* fold the 33-bit result into 16-bits */
+	    "	addxcc		gr0,%0,%0,icc0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	sethi		#0,%0		\n"
+	    "	add		%1,%0,%0	\n"
+	    "	srli		%0,#16,%1	\n"
+	    "	add		%1,%0,%0	\n"
+
+	    : "=r" (sum), "=&r" (tmp), "=r" (tmp2)
+	    : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto)
+	    : "icc0"
+	    );
+
+	return ~sum;
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/include/asm-frv/cpu-irqs.h b/include/asm-frv/cpu-irqs.h
new file mode 100644
index 000000000000..5cd691e1f8c4
--- /dev/null
+++ b/include/asm-frv/cpu-irqs.h
@@ -0,0 +1,87 @@
+/* cpu-irqs.h: on-CPU peripheral irqs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CPU_IRQS_H
+#define _ASM_CPU_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/irq-routing.h>
+
+#define IRQ_BASE_CPU		(NR_IRQ_ACTIONS_PER_GROUP * 0)
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_CPU__UNUSED = IRQ_BASE_CPU,
+	IRQ_CPU_UART0,
+	IRQ_CPU_UART1,
+	IRQ_CPU_TIMER0,
+	IRQ_CPU_TIMER1,
+	IRQ_CPU_TIMER2,
+	IRQ_CPU_DMA0,
+	IRQ_CPU_DMA1,
+	IRQ_CPU_DMA2,
+	IRQ_CPU_DMA3,
+	IRQ_CPU_DMA4,
+	IRQ_CPU_DMA5,
+	IRQ_CPU_DMA6,
+	IRQ_CPU_DMA7,
+	IRQ_CPU_EXTERNAL0,
+	IRQ_CPU_EXTERNAL1,
+	IRQ_CPU_EXTERNAL2,
+	IRQ_CPU_EXTERNAL3,
+	IRQ_CPU_EXTERNAL4,
+	IRQ_CPU_EXTERNAL5,
+	IRQ_CPU_EXTERNAL6,
+	IRQ_CPU_EXTERNAL7,
+};
+
+/* IRQ to level mappings */
+#define IRQ_GDBSTUB_LEVEL	15
+#define IRQ_UART_LEVEL		13
+
+#ifdef CONFIG_GDBSTUB_UART0
+#define IRQ_UART0_LEVEL		IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART0_LEVEL		IRQ_UART_LEVEL
+#endif
+
+#ifdef CONFIG_GDBSTUB_UART1
+#define IRQ_UART1_LEVEL		IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART1_LEVEL		IRQ_UART_LEVEL
+#endif
+
+#define IRQ_DMA0_LEVEL		14
+#define IRQ_DMA1_LEVEL		14
+#define IRQ_DMA2_LEVEL		14
+#define IRQ_DMA3_LEVEL		14
+#define IRQ_DMA4_LEVEL		14
+#define IRQ_DMA5_LEVEL		14
+#define IRQ_DMA6_LEVEL		14
+#define IRQ_DMA7_LEVEL		14
+
+#define IRQ_TIMER0_LEVEL	12
+#define IRQ_TIMER1_LEVEL	11
+#define IRQ_TIMER2_LEVEL	10
+
+#define IRQ_XIRQ0_LEVEL		1
+#define IRQ_XIRQ1_LEVEL		2
+#define IRQ_XIRQ2_LEVEL		3
+#define IRQ_XIRQ3_LEVEL		4
+#define IRQ_XIRQ4_LEVEL		5
+#define IRQ_XIRQ5_LEVEL		6
+#define IRQ_XIRQ6_LEVEL		7
+#define IRQ_XIRQ7_LEVEL		8
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_CPU_IRQS_H */
diff --git a/include/asm-frv/cpumask.h b/include/asm-frv/cpumask.h
new file mode 100644
index 000000000000..d999c20c84d2
--- /dev/null
+++ b/include/asm-frv/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUMASK_H
+#define _ASM_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _ASM_CPUMASK_H */
diff --git a/include/asm-frv/cputime.h b/include/asm-frv/cputime.h
new file mode 100644
index 000000000000..f6c373ad2b80
--- /dev/null
+++ b/include/asm-frv/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUTIME_H
+#define _ASM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_CPUTIME_H */
diff --git a/include/asm-frv/current.h b/include/asm-frv/current.h
new file mode 100644
index 000000000000..86b027491b08
--- /dev/null
+++ b/include/asm-frv/current.h
@@ -0,0 +1,30 @@
+/* current.h: FRV current task pointer
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * dedicate GR29 to keeping the current task pointer
+ */
+register struct task_struct *current asm("gr29");
+
+#define get_current() current
+
+#else
+
+#define CURRENT gr29
+
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/include/asm-frv/delay.h b/include/asm-frv/delay.h
new file mode 100644
index 000000000000..597b4ebf03b4
--- /dev/null
+++ b/include/asm-frv/delay.h
@@ -0,0 +1,50 @@
+/* delay.h: FRV delay code
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <asm/param.h>
+#include <asm/timer-regs.h>
+
+/*
+ * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop]
+ */
+extern unsigned long __delay_loops_MHz;
+
+static inline void __delay(unsigned long loops)
+{
+	asm volatile("1:	subicc	%0,#1,%0,icc0	\n"
+		     "		bnc	icc0,#2,1b	\n"
+		     : "=r" (loops)
+		     : "0" (loops)
+		     : "icc0"
+		     );
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+	__delay(usecs * __delay_loops_MHz);
+}
+
+#define ndelay(n)	udelay((n) * 5)
+
+#endif /* _ASM_DELAY_H */
diff --git a/include/asm-frv/div64.h b/include/asm-frv/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-frv/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-frv/dm9000.h b/include/asm-frv/dm9000.h
new file mode 100644
index 000000000000..f6f48fd9ec6e
--- /dev/null
+++ b/include/asm-frv/dm9000.h
@@ -0,0 +1,37 @@
+/* dm9000.h: Davicom DM9000 adapter configuration
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DM9000_H
+#define _ASM_DM9000_H
+
+#include <asm/mb-regs.h>
+
+#define DM9000_ARCH_IOBASE	(__region_CS6 + 0x300)
+#define DM9000_ARCH_IRQ		IRQ_CPU_EXTERNAL3	/* XIRQ #3 (shared with FPGA) */
+#undef DM9000_ARCH_IRQ_ACTLOW				/* IRQ pin active high */
+#define DM9000_ARCH_BUS_INFO	"CS6#+0x300"		/* bus info for ethtool */
+
+#undef __is_PCI_IO
+#define __is_PCI_IO(addr)	0	/* not PCI */
+
+#undef inl
+#define inl(addr)										\
+({												\
+	unsigned long __ioaddr = (unsigned long) addr;						\
+	uint32_t x = readl(__ioaddr);								\
+	((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff);	\
+})
+
+#undef insl
+#define insl(a,b,l)	__insl(a,b,l,0) /* don't byte-swap */
+
+
+#endif /* _ASM_DM9000_H */
diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h
new file mode 100644
index 000000000000..0206ab35eae0
--- /dev/null
+++ b/include/asm-frv/dma-mapping.h
@@ -0,0 +1,184 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/device.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern unsigned long __nongprelbss dma_coherent_mem_start;
+extern unsigned long __nongprelbss dma_coherent_mem_end;
+
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, int gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((unsigned long) (page_to_phys((sg)->page) + (sg)->offset))
+#define sg_dma_len(sg)		((sg)->length)
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+				 enum dma_data_direction direction);
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+extern
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+			size_t size, enum dma_data_direction direction);
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			     enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+				enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+			 enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+			    enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline
+int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+
+	return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+	return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d)	(1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+		    enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+#endif  /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-frv/dma.h b/include/asm-frv/dma.h
new file mode 100644
index 000000000000..d8f9a2f21521
--- /dev/null
+++ b/include/asm-frv/dma.h
@@ -0,0 +1,129 @@
+/* dma.h: FRV DMA controller management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+//#define DMA_DEBUG 1
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+
+#undef MAX_DMA_CHANNELS		/* don't use kernel/dma.c */
+
+/* under 2.4 this is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS		PAGE_OFFSET
+
+/*
+ * FRV DMA controller management
+ */
+struct pt_regs;
+
+typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data,
+					 struct pt_regs *regs);
+
+extern void frv_dma_init(void);
+
+extern int frv_dma_open(const char *devname,
+			unsigned long dmamask,
+			int dmacap,
+			dma_irq_handler_t handler,
+			unsigned long irq_flags,
+			void *data);
+
+/* channels required */
+#define FRV_DMA_MASK_ANY	ULONG_MAX	/* any channel */
+
+/* capabilities required */
+#define FRV_DMA_CAP_DREQ	0x01		/* DMA request pin */
+#define FRV_DMA_CAP_DACK	0x02		/* DMA ACK pin */
+#define FRV_DMA_CAP_DONE	0x04		/* DMA done pin */
+
+extern void frv_dma_close(int dma);
+
+extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
+
+extern void frv_dma_start(int dma,
+			  unsigned long sba, unsigned long dba,
+			  unsigned long pix, unsigned long six, unsigned long bcl);
+
+extern void frv_dma_restart_circular(int dma, unsigned long six);
+
+extern void frv_dma_stop(int dma);
+
+extern int is_frv_dma_interrupting(int dma);
+
+extern void frv_dma_dump(int dma);
+
+extern void frv_dma_status_clear(int dma);
+
+#define FRV_DMA_NCHANS	8
+#define FRV_DMA_4CHANS	4
+#define FRV_DMA_8CHANS	8
+
+#define DMAC_CCFRx		0x00	/* channel configuration reg */
+#define DMAC_CCFRx_CM_SHIFT	16
+#define DMAC_CCFRx_CM_DA	0x00000000
+#define DMAC_CCFRx_CM_SCA	0x00010000
+#define DMAC_CCFRx_CM_DCA	0x00020000
+#define DMAC_CCFRx_CM_2D	0x00030000
+#define DMAC_CCFRx_ATS_SHIFT	8
+#define DMAC_CCFRx_RS_INTERN	0x00000000
+#define DMAC_CCFRx_RS_EXTERN	0x00000001
+#define DMAC_CCFRx_RS_SHIFT	0
+
+#define DMAC_CSTRx		0x08	/* channel status reg */
+#define DMAC_CSTRx_FS		0x0000003f
+#define DMAC_CSTRx_NE		0x00000100
+#define DMAC_CSTRx_FED		0x00000200
+#define DMAC_CSTRx_WER		0x00000800
+#define DMAC_CSTRx_RER		0x00001000
+#define DMAC_CSTRx_CE		0x00002000
+#define DMAC_CSTRx_INT		0x00800000
+#define DMAC_CSTRx_BUSY		0x80000000
+
+#define DMAC_CCTRx		0x10	/* channel control reg */
+#define DMAC_CCTRx_DSIZ_1	0x00000000
+#define DMAC_CCTRx_DSIZ_2	0x00000001
+#define DMAC_CCTRx_DSIZ_4	0x00000002
+#define DMAC_CCTRx_DSIZ_32	0x00000005
+#define DMAC_CCTRx_DAU_HOLD	0x00000000
+#define DMAC_CCTRx_DAU_INC	0x00000010
+#define DMAC_CCTRx_DAU_DEC	0x00000020
+#define DMAC_CCTRx_SSIZ_1	0x00000000
+#define DMAC_CCTRx_SSIZ_2	0x00000100
+#define DMAC_CCTRx_SSIZ_4	0x00000200
+#define DMAC_CCTRx_SSIZ_32	0x00000500
+#define DMAC_CCTRx_SAU_HOLD	0x00000000
+#define DMAC_CCTRx_SAU_INC	0x00001000
+#define DMAC_CCTRx_SAU_DEC	0x00002000
+#define DMAC_CCTRx_FC		0x08000000
+#define DMAC_CCTRx_ICE		0x10000000
+#define DMAC_CCTRx_IE		0x40000000
+#define DMAC_CCTRx_ACT		0x80000000
+
+#define DMAC_SBAx		0x18	/* source base address reg */
+#define DMAC_DBAx		0x20	/* data base address reg */
+#define DMAC_PIXx		0x28	/* primary index reg */
+#define DMAC_SIXx		0x30	/* secondary index reg */
+#define DMAC_BCLx		0x38	/* byte count limit reg */
+#define DMAC_APRx		0x40	/* alternate pointer reg */
+
+/*
+ * required for PCI + MODULES
+ */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-frv/elf.h b/include/asm-frv/elf.h
new file mode 100644
index 000000000000..7d2098f0476b
--- /dev/null
+++ b/include/asm-frv/elf.h
@@ -0,0 +1,147 @@
+/* elf.h: FR-V ELF definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68knommu/elf.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+struct elf32_hdr;
+
+/*
+ * ELF header e_flags defines.
+ */
+#define EF_FRV_GPR_MASK         0x00000003 /* mask for # of gprs */
+#define EF_FRV_GPR32		0x00000001 /* Only uses GR on 32-register */
+#define EF_FRV_GPR64		0x00000002 /* Only uses GR on 64-register */
+#define EF_FRV_FPR_MASK         0x0000000c /* mask for # of fprs */
+#define EF_FRV_FPR32		0x00000004 /* Only uses FR on 32-register */
+#define EF_FRV_FPR64		0x00000008 /* Only uses FR on 64-register */
+#define EF_FRV_FPR_NONE		0x0000000C /* Uses software floating-point */
+#define EF_FRV_DWORD_MASK       0x00000030 /* mask for dword support */
+#define EF_FRV_DWORD_YES	0x00000010 /* Assumes stack aligned to 8-byte boundaries. */
+#define EF_FRV_DWORD_NO		0x00000020 /* Assumes stack aligned to 4-byte boundaries. */
+#define EF_FRV_DOUBLE		0x00000040 /* Uses double instructions. */
+#define EF_FRV_MEDIA		0x00000080 /* Uses media instructions. */
+#define EF_FRV_PIC		0x00000100 /* Uses position independent code. */
+#define EF_FRV_NON_PIC_RELOCS	0x00000200 /* Does not use position Independent code. */
+#define EF_FRV_MULADD           0x00000400 /* -mmuladd */
+#define EF_FRV_BIGPIC           0x00000800 /* -fPIC */
+#define EF_FRV_LIBPIC           0x00001000 /* -mlibrary-pic */
+#define EF_FRV_G0               0x00002000 /* -G 0, no small data ptr */
+#define EF_FRV_NOPACK           0x00004000 /* -mnopack */
+#define EF_FRV_FDPIC            0x00008000 /* -mfdpic */
+#define EF_FRV_CPU_MASK         0xff000000 /* specific cpu bits */
+#define EF_FRV_CPU_GENERIC	0x00000000 /* Set CPU type is FR-V */
+#define EF_FRV_CPU_FR500	0x01000000 /* Set CPU type is FR500 */
+#define EF_FRV_CPU_FR300	0x02000000 /* Set CPU type is FR300 */
+#define EF_FRV_CPU_SIMPLE       0x03000000 /* SIMPLE */
+#define EF_FRV_CPU_TOMCAT       0x04000000 /* Tomcat, FR500 prototype */
+#define EF_FRV_CPU_FR400	0x05000000 /* Set CPU type is FR400 */
+#define EF_FRV_CPU_FR550        0x06000000 /* Set CPU type is FR550 */
+#define EF_FRV_CPU_FR405	0x07000000 /* Set CPU type is FR405 */
+#define EF_FRV_CPU_FR450	0x08000000 /* Set CPU type is FR450 */
+
+/*
+ * FR-V ELF relocation types
+ */
+
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct fpmedia_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *hdr);
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS))
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_FRV
+
+#define ELF_PLAT_INIT(_r)			\
+do {						\
+	__kernel_frame0_ptr->gr16	= 0;	\
+	__kernel_frame0_ptr->gr17	= 0;	\
+	__kernel_frame0_ptr->gr18	= 0;	\
+	__kernel_frame0_ptr->gr19	= 0;	\
+	__kernel_frame0_ptr->gr20	= 0;	\
+	__kernel_frame0_ptr->gr21	= 0;	\
+	__kernel_frame0_ptr->gr22	= 0;	\
+	__kernel_frame0_ptr->gr23	= 0;	\
+	__kernel_frame0_ptr->gr24	= 0;	\
+	__kernel_frame0_ptr->gr25	= 0;	\
+	__kernel_frame0_ptr->gr26	= 0;	\
+	__kernel_frame0_ptr->gr27	= 0;	\
+	__kernel_frame0_ptr->gr29	= 0;	\
+} while(0)
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
+do {											\
+	__kernel_frame0_ptr->gr16	= _exec_map_addr;				\
+	__kernel_frame0_ptr->gr17	= _interp_map_addr;				\
+	__kernel_frame0_ptr->gr18	= _dynamic_addr;				\
+	__kernel_frame0_ptr->gr19	= 0;						\
+	__kernel_frame0_ptr->gr20	= 0;						\
+	__kernel_frame0_ptr->gr21	= 0;						\
+	__kernel_frame0_ptr->gr22	= 0;						\
+	__kernel_frame0_ptr->gr23	= 0;						\
+	__kernel_frame0_ptr->gr24	= 0;						\
+	__kernel_frame0_ptr->gr25	= 0;						\
+	__kernel_frame0_ptr->gr26	= 0;						\
+	__kernel_frame0_ptr->gr27	= 0;						\
+	__kernel_frame0_ptr->gr29	= 0;						\
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	16384
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0x08000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	memcpy(&pr_reg[0], &regs->sp, 31 * sizeof(uint32_t));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif
diff --git a/include/asm-frv/errno.h b/include/asm-frv/errno.h
new file mode 100644
index 000000000000..d010795ceefe
--- /dev/null
+++ b/include/asm-frv/errno.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_ERRNO_H */
+
diff --git a/include/asm-frv/fcntl.h b/include/asm-frv/fcntl.h
new file mode 100644
index 000000000000..d61b999f9973
--- /dev/null
+++ b/include/asm-frv/fcntl.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* _ASM_FCNTL_H */
+
diff --git a/include/asm-frv/fpu.h b/include/asm-frv/fpu.h
new file mode 100644
index 000000000000..b1178f8ca5ce
--- /dev/null
+++ b/include/asm-frv/fpu.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_FPU_H
+#define __ASM_FPU_H
+
+#include <linux/config.h>
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0)
+
+#endif /* __ASM_FPU_H */
diff --git a/include/asm-frv/gdb-stub.h b/include/asm-frv/gdb-stub.h
new file mode 100644
index 000000000000..c58479a4be99
--- /dev/null
+++ b/include/asm-frv/gdb-stub.h
@@ -0,0 +1,118 @@
+/* gdb-stub.h: FRV GDB stub
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_GDB_STUB_H
+#define __ASM_GDB_STUB_H
+
+#undef GDBSTUB_DEBUG_PROTOCOL
+
+#include <asm/ptrace.h>
+
+/*
+ * important register numbers in GDB protocol
+ * - GR0,  GR1,  GR2,  GR3,  GR4,  GR5,  GR6,  GR7,
+ * - GR8,  GR9,  GR10, GR11, GR12, GR13, GR14, GR15,
+ * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
+ * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
+ * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
+ * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
+ * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
+ * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
+ * - FR0,  FR1,  FR2,  FR3,  FR4,  FR5,  FR6,  FR7,
+ * - FR8,  FR9,  FR10, FR11, FR12, FR13, FR14, FR15,
+ * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23,
+ * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31,
+ * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39,
+ * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47,
+ * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55,
+ * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63,
+ * - PC, PSR, CCR, CCCR,
+ * - _X132, _X133, _X134
+ * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
+ * - SCR0, SCR1, SCR2, SCR3,
+ * - LR, LCR,
+ * - IACC0H, IACC0L,
+ * - FSR0,
+ * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7,
+ * - ACCG0123, ACCG4567,
+ * - MSR0, MSR1,
+ * - GNER0, GNER1,
+ * - FNER0, FNER1,
+ */
+#define GDB_REG_GR(N)	(N)
+#define GDB_REG_FR(N)	(64+(N))
+#define GDB_REG_PC	128
+#define GDB_REG_PSR	129
+#define GDB_REG_CCR	130
+#define GDB_REG_CCCR	131
+#define GDB_REG_TBR	135
+#define GDB_REG_BRR	136
+#define GDB_REG_DBAR(N)	(137+(N))
+#define GDB_REG_SCR(N)	(141+(N))
+#define GDB_REG_LR	145
+#define GDB_REG_LCR	146
+#define GDB_REG_FSR0	149
+#define GDB_REG_ACC(N)	(150+(N))
+#define GDB_REG_ACCG(N)	(158+(N)/4)
+#define GDB_REG_MSR(N)	(160+(N))
+#define GDB_REG_GNER(N)	(162+(N))
+#define GDB_REG_FNER(N)	(164+(N))
+
+#define GDB_REG_SP	GDB_REG_GR(1)
+#define GDB_REG_FP	GDB_REG_GR(2)
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern void gdbstub_init(void);
+extern void gdbstub(int type);
+extern void gdbstub_exit(int status);
+
+extern void gdbstub_io_init(void);
+extern void gdbstub_set_baud(unsigned baud);
+extern int gdbstub_rx_char(unsigned char *_ch, int nonblock);
+extern void gdbstub_tx_char(unsigned char ch);
+extern void gdbstub_tx_flush(void);
+extern void gdbstub_do_rx(void);
+
+extern asmlinkage void __debug_stub_init_break(void);
+extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void start_kernel(void);
+
+extern asmlinkage void gdbstub_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(void);
+extern asmlinkage void gdbstub_intercept(void);
+
+extern uint32_t __entry_usertrap_table[];
+extern uint32_t __entry_kerneltrap_table[];
+
+extern volatile u8	gdbstub_rx_buffer[PAGE_SIZE];
+extern volatile u32	gdbstub_rx_inp;
+extern volatile u32	gdbstub_rx_outp;
+extern volatile u8	gdbstub_rx_overflow;
+extern u8		gdbstub_rx_unget;
+
+extern void gdbstub_printk(const char *fmt, ...);
+extern void debug_to_serial(const char *p, int n);
+extern void console_set_baud(unsigned baud);
+
+#ifdef GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT,...) ({ 0; })
+#endif
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* __ASM_GDB_STUB_H */
diff --git a/include/asm-frv/gpio-regs.h b/include/asm-frv/gpio-regs.h
new file mode 100644
index 000000000000..9edf5d5d4d3f
--- /dev/null
+++ b/include/asm-frv/gpio-regs.h
@@ -0,0 +1,116 @@
+/* gpio-regs.h: on-chip general purpose I/O registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_GPIO_REGS
+#define _ASM_GPIO_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_PDR()	({ __reg(0xfeff0400); })
+#define __set_PDR(V)	do { __reg(0xfeff0400) = (V); mb(); } while(0)
+
+#define __get_GPDR()	({ __reg(0xfeff0408); })
+#define __set_GPDR(V)	do { __reg(0xfeff0408) = (V); mb(); } while(0)
+
+#define __get_SIR()	({ __reg(0xfeff0410); })
+#define __set_SIR(V)	do { __reg(0xfeff0410) = (V); mb(); } while(0)
+
+#define __get_SOR()	({ __reg(0xfeff0418); })
+#define __set_SOR(V)	do { __reg(0xfeff0418) = (V); mb(); } while(0)
+
+#define __set_PDSR(V)	do { __reg(0xfeff0420) = (V); mb(); } while(0)
+
+#define __set_PDCR(V)	do { __reg(0xfeff0428) = (V); mb(); } while(0)
+
+#define __get_RSTR()	({ __reg(0xfeff0500); })
+#define __set_RSTR(V)	do { __reg(0xfeff0500) = (V); mb(); } while(0)
+
+
+
+/* PDR definitions */
+#define PDR_GPIO_DATA(X)	(1 << (X))
+
+/* GPDR definitions */
+#define GPDR_INPUT		0
+#define GPDR_OUTPUT		1
+#define GPDR_DREQ0_BIT		0x00001000
+#define GPDR_DREQ1_BIT		0x00008000
+#define GPDR_DREQ2_BIT		0x00040000
+#define GPDR_DREQ3_BIT		0x00080000
+#define GPDR_DREQ4_BIT		0x00004000
+#define GPDR_DREQ5_BIT		0x00020000
+#define GPDR_DREQ6_BIT		0x00100000
+#define GPDR_DREQ7_BIT		0x00200000
+#define GPDR_DACK0_BIT		0x00002000
+#define GPDR_DACK1_BIT		0x00010000
+#define GPDR_DACK2_BIT		0x00100000
+#define GPDR_DACK3_BIT		0x00200000
+#define GPDR_DONE0_BIT		0x00004000
+#define GPDR_DONE1_BIT		0x00020000
+#define GPDR_GPIO_DIR(X,D)	((D) << (X))
+
+/* SIR definitions */
+#define SIR_GPIO_INPUT		0
+#define SIR_DREQ7_INPUT		0x00200000
+#define SIR_DREQ6_INPUT		0x00100000
+#define SIR_DREQ3_INPUT		0x00080000
+#define SIR_DREQ2_INPUT		0x00040000
+#define SIR_DREQ5_INPUT		0x00020000
+#define SIR_DREQ1_INPUT		0x00008000
+#define SIR_DREQ4_INPUT		0x00004000
+#define SIR_DREQ0_INPUT		0x00001000
+#define SIR_RXD1_INPUT		0x00000400
+#define SIR_CTS0_INPUT		0x00000100
+#define SIR_RXD0_INPUT		0x00000040
+#define SIR_GATE1_INPUT		0x00000020
+#define SIR_GATE0_INPUT		0x00000010
+#define SIR_IRQ3_INPUT		0x00000008
+#define SIR_IRQ2_INPUT		0x00000004
+#define SIR_IRQ1_INPUT		0x00000002
+#define SIR_IRQ0_INPUT		0x00000001
+#define SIR_DREQ_BITS		(SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \
+				 SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \
+				 SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \
+				 SIR_DREQ6_INPUT | SIR_DREQ7_INPUT)
+
+/* SOR definitions */
+#define SOR_GPIO_OUTPUT		0
+#define SOR_DACK3_OUTPUT	0x00200000
+#define SOR_DACK2_OUTPUT	0x00100000
+#define SOR_DONE1_OUTPUT	0x00020000
+#define SOR_DACK1_OUTPUT	0x00010000
+#define SOR_DONE0_OUTPUT	0x00004000
+#define SOR_DACK0_OUTPUT	0x00002000
+#define SOR_TXD1_OUTPUT		0x00000800
+#define SOR_RTS0_OUTPUT		0x00000200
+#define SOR_TXD0_OUTPUT		0x00000080
+#define SOR_TOUT1_OUTPUT	0x00000020
+#define SOR_TOUT0_OUTPUT	0x00000010
+#define SOR_DONE_BITS		(SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT)
+#define SOR_DACK_BITS		(SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \
+				 SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT)
+
+/* PDSR definitions */
+#define PDSR_UNCHANGED		0
+#define PDSR_SET_BIT(X)		(1 << (X))
+
+/* PDCR definitions */
+#define PDCR_UNCHANGED		0
+#define PDCR_CLEAR_BIT(X)	(1 << (X))
+
+/* RSTR definitions */
+/* Read Only */
+#define RSTR_POWERON		0x00000400
+#define RSTR_SOFTRESET_STATUS	0x00000100
+/* Write Only */
+#define RSTR_SOFTRESET		0x00000001
+
+#endif /* _ASM_GPIO_REGS */
diff --git a/include/asm-frv/hardirq.h b/include/asm-frv/hardirq.h
new file mode 100644
index 000000000000..5248ca054909
--- /dev/null
+++ b/include/asm-frv/hardirq.h
@@ -0,0 +1,30 @@
+/* hardirq.h: FRV hardware IRQ management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned long idle_timestamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#ifdef CONFIG_SMP
+#error SMP not available on FR-V
+#endif /* CONFIG_SMP */
+
+
+#endif
diff --git a/include/asm-frv/highmem.h b/include/asm-frv/highmem.h
new file mode 100644
index 000000000000..295f74a57f22
--- /dev/null
+++ b/include/asm-frv/highmem.h
@@ -0,0 +1,181 @@
+/* highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * See Documentation/fujitsu/frv/mmu-layout.txt for more information.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/mem-layout.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+
+#define NR_TLB_LINES		64	/* number of lines in the TLB */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define HIGHMEM_DEBUG 1
+#else
+#define HIGHMEM_DEBUG 0
+#endif
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+#define kmap_prot PAGE_KERNEL
+#define kmap_pte ______kmap_pte_in_TLB
+extern pte_t *pkmap_page_table;
+
+#define flush_cache_kmaps()  do { } while (0)
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP	PTRS_PER_PTE
+#define LAST_PKMAP_MASK	(LAST_PKMAP - 1)
+#define PKMAP_NR(virt)	((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+
+extern struct page *kmap_atomic_to_page(void *ptr);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+#define KMAP_ATOMIC_CACHE_DAMR		8
+
+#ifndef __ASSEMBLY__
+
+#define __kmap_atomic_primary(type, paddr, ampr)						\
+({												\
+	unsigned long damlr, dampr;								\
+												\
+	dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V;		\
+												\
+	if (type != __KM_CACHE)									\
+		asm volatile("movgs %0,dampr"#ampr :: "r"(dampr));				\
+	else											\
+		asm volatile("movgs %0,iampr"#ampr"\n"						\
+			     "movgs %0,dampr"#ampr"\n"						\
+			     :: "r"(dampr)							\
+			     );									\
+												\
+	asm("movsg damlr"#ampr",%0" : "=r"(damlr));						\
+												\
+	/*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/		\
+												\
+	(void *) damlr;										\
+})
+
+#define __kmap_atomic_secondary(slot, paddr)							  \
+({												  \
+	unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE;			  \
+	unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
+												  \
+	asm volatile("movgs %0,tplr \n"								  \
+		     "movgs %1,tppr \n"								  \
+		     "tlbpr %0,gr0,#2,#1"							  \
+		     : : "r"(damlr), "r"(dampr));						  \
+												  \
+	/*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/			  \
+												  \
+	(void *) damlr;										  \
+})
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	unsigned long paddr;
+
+	preempt_disable();
+	paddr = page_to_phys(page);
+
+	switch (type) {
+        case 0:		return __kmap_atomic_primary(0, paddr, 2);
+        case 1:		return __kmap_atomic_primary(1, paddr, 3);
+        case 2:		return __kmap_atomic_primary(2, paddr, 4);
+        case 3:		return __kmap_atomic_primary(3, paddr, 5);
+        case 4:		return __kmap_atomic_primary(4, paddr, 6);
+        case 5:		return __kmap_atomic_primary(5, paddr, 7);
+        case 6:		return __kmap_atomic_primary(6, paddr, 8);
+        case 7:		return __kmap_atomic_primary(7, paddr, 9);
+        case 8:		return __kmap_atomic_primary(8, paddr, 10);
+
+	case 9 ... 9 + NR_TLB_LINES - 1:
+		return __kmap_atomic_secondary(type - 9, paddr);
+
+	default:
+		BUG();
+		return 0;
+	}
+}
+
+#define __kunmap_atomic_primary(type, ampr)			\
+do {								\
+	asm volatile("movgs gr0,dampr"#ampr"\n");		\
+	if (type == __KM_CACHE)					\
+		asm volatile("movgs gr0,iampr"#ampr"\n");	\
+} while(0)
+
+#define __kunmap_atomic_secondary(slot, vaddr)			\
+do {								\
+	asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr));	\
+} while(0)
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+	switch (type) {
+        case 0:		__kunmap_atomic_primary(0, 2);	break;
+        case 1:		__kunmap_atomic_primary(1, 3);	break;
+        case 2:		__kunmap_atomic_primary(2, 4);	break;
+        case 3:		__kunmap_atomic_primary(3, 5);	break;
+        case 4:		__kunmap_atomic_primary(4, 6);	break;
+        case 5:		__kunmap_atomic_primary(5, 7);	break;
+        case 6:		__kunmap_atomic_primary(6, 8);	break;
+        case 7:		__kunmap_atomic_primary(7, 9);	break;
+        case 8:		__kunmap_atomic_primary(8, 10);	break;
+
+	case 9 ... 9 + NR_TLB_LINES - 1:
+		__kunmap_atomic_secondary(type - 9, kvaddr);
+		break;
+
+	default:
+		BUG();
+	}
+	preempt_enable();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-frv/hw_irq.h b/include/asm-frv/hw_irq.h
new file mode 100644
index 000000000000..522ad37923d8
--- /dev/null
+++ b/include/asm-frv/hw_irq.h
@@ -0,0 +1,16 @@
+/* hw_irq.h: FR-V specific h/w IRQ stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-frv/ide.h b/include/asm-frv/ide.h
new file mode 100644
index 000000000000..f9caecf7e3c0
--- /dev/null
+++ b/include/asm-frv/ide.h
@@ -0,0 +1,43 @@
+/* ide.h: FRV IDE declarations
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IDE_H
+#define _ASM_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 8
+#endif
+
+/****************************************************************************/
+/*
+ * some bits needed for parts of the IDE subsystem to compile
+ */
+#define __ide_mm_insw(port, addr, n)	insw(port, addr, n)
+#define __ide_mm_insl(port, addr, n)	insl(port, addr, n)
+#define __ide_mm_outsw(port, addr, n)	outsw(port, addr, n)
+#define __ide_mm_outsl(port, addr, n)	outsl(port, addr, n)
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IDE_H */
diff --git a/include/asm-frv/init.h b/include/asm-frv/init.h
new file mode 100644
index 000000000000..8b15838de216
--- /dev/null
+++ b/include/asm-frv/init.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_INIT_H
+#define _ASM_INIT_H
+
+#define __init __attribute__ ((__section__ (".text.init")))
+#define __initdata __attribute__ ((__section__ (".data.init")))
+/* For assembly routines */
+#define __INIT		.section	".text.init",#alloc,#execinstr
+#define __FINIT		.previous
+#define __INITDATA	.section	".data.init",#alloc,#write
+
+#endif
+
diff --git a/include/asm-frv/io.h b/include/asm-frv/io.h
new file mode 100644
index 000000000000..48829f727242
--- /dev/null
+++ b/include/asm-frv/io.h
@@ -0,0 +1,290 @@
+/* io.h: FRV I/O operations
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This gets interesting when talking to the PCI bus - the CPU is in big endian
+ * mode, the PCI bus is little endian and the hardware in the middle can do
+ * byte swapping
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/virtconvert.h>
+#include <asm/string.h>
+#include <asm/mb-regs.h>
+#include <linux/delay.h>
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned long _swapl(unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+//#define __iormb() asm volatile("membar")
+//#define __iowmb() asm volatile("membar")
+
+#define __raw_readb(addr) __builtin_read8((void *) (addr))
+#define __raw_readw(addr) __builtin_read16((void *) (addr))
+#define __raw_readl(addr) __builtin_read32((void *) (addr))
+
+#define __raw_writeb(datum, addr) __builtin_write8((void *) (addr), datum)
+#define __raw_writew(datum, addr) __builtin_write16((void *) (addr), datum)
+#define __raw_writel(datum, addr) __builtin_write32((void *) (addr), datum)
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+	const uint8_t *bp = buf;
+
+	while (len--)
+		__builtin_write8((volatile void __iomem *) __ioaddr, *bp++);
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+	const uint16_t *bp = buf;
+
+	while (len--)
+		__builtin_write16((volatile void __iomem *) __ioaddr, (*bp++));
+}
+
+extern void __outsl_ns(unsigned int addr, const void *buf, int len);
+extern void __outsl_sw(unsigned int addr, const void *buf, int len);
+static inline void __outsl(unsigned int addr, const void *buf, int len, int swap)
+{
+	unsigned long __ioaddr = (unsigned long) addr;
+
+	if (!swap)
+		__outsl_ns(__ioaddr, buf, len);
+	else
+		__outsl_sw(__ioaddr, buf, len);
+}
+
+static inline void io_insb(unsigned long addr, void *buf, int len)
+{
+	uint8_t *bp = buf;
+
+	while (len--)
+		*bp++ = __builtin_read8((volatile void __iomem *) addr);
+}
+
+static inline void io_insw(unsigned long addr, void *buf, int len)
+{
+	uint16_t *bp = buf;
+
+	while (len--)
+		*bp++ = __builtin_read16((volatile void __iomem *) addr);
+}
+
+extern void __insl_ns(unsigned long addr, void *buf, int len);
+extern void __insl_sw(unsigned long addr, void *buf, int len);
+static inline void __insl(unsigned long addr, void *buf, int len, int swap)
+{
+	if (!swap)
+		__insl_ns(addr, buf, len);
+	else
+		__insl_sw(addr, buf, len);
+}
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+
+static inline void memcpy_fromio(void *dst, volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+static inline uint8_t inb(unsigned long addr)
+{
+	return __builtin_read8((void *)addr);
+}
+
+static inline uint16_t inw(unsigned long addr)
+{
+	uint16_t ret = __builtin_read16((void *)addr);
+
+	if (__is_PCI_IO(addr))
+		ret = _swapw(ret);
+
+	return ret;
+}
+
+static inline uint32_t inl(unsigned long addr)
+{
+	uint32_t ret = __builtin_read32((void *)addr);
+
+	if (__is_PCI_IO(addr))
+		ret = _swapl(ret);
+
+	return ret;
+}
+
+static inline void outb(uint8_t datum, unsigned long addr)
+{
+	__builtin_write8((void *)addr, datum);
+}
+
+static inline void outw(uint16_t datum, unsigned long addr)
+{
+	if (__is_PCI_IO(addr))
+		datum = _swapw(datum);
+	__builtin_write16((void *)addr, datum);
+}
+
+static inline void outl(uint32_t datum, unsigned long addr)
+{
+	if (__is_PCI_IO(addr))
+		datum = _swapl(datum);
+	__builtin_write32((void *)addr, datum);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x,addr)	outb(x,addr)
+#define outw_p(x,addr)	outw(x,addr)
+#define outl_p(x,addr)	outl(x,addr)
+
+#define outsb(a,b,l)	io_outsb(a,b,l)
+#define outsw(a,b,l)	io_outsw(a,b,l)
+#define outsl(a,b,l)	__outsl(a,b,l,0)
+
+#define insb(a,b,l)	io_insb(a,b,l)
+#define insw(a,b,l)	io_insw(a,b,l)
+#define insl(a,b,l)	__insl(a,b,l,0)
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+static inline uint8_t readb(const volatile void __iomem *addr)
+{
+	return __builtin_read8((volatile uint8_t __force *) addr);
+}
+
+static inline uint16_t readw(const volatile void __iomem *addr)
+{
+	uint16_t ret =	__builtin_read16((volatile uint16_t __force *)addr);
+
+	if (__is_PCI_MEM(addr))
+		ret = _swapw(ret);
+	return ret;
+}
+
+static inline uint32_t readl(const volatile void __iomem *addr)
+{
+	uint32_t ret =	__builtin_read32((volatile uint32_t __force *)addr);
+
+	if (__is_PCI_MEM(addr))
+		ret = _swapl(ret);
+
+	return ret;
+}
+
+static inline void writeb(uint8_t datum, volatile void __iomem *addr)
+{
+	__builtin_write8((volatile uint8_t __force *) addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+static inline void writew(uint16_t datum, volatile void __iomem *addr)
+{
+	if (__is_PCI_MEM(addr))
+		datum = _swapw(datum);
+
+	__builtin_write16((volatile uint16_t __force *) addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+static inline void writel(uint32_t datum, volatile void __iomem *addr)
+{
+	if (__is_PCI_MEM(addr))
+		datum = _swapl(datum);
+
+	__builtin_write32((volatile uint32_t __force *) addr, datum);
+	if (__is_PCI_MEM(addr))
+		__flush_PCI_writes();
+}
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void __iomem *addr, unsigned long size);
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void __iomem *addr);
+
+static inline void flush_write_buffers(void)
+{
+	__asm__ __volatile__ ("membar" : : :"memory");
+}
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/include/asm-frv/ioctl.h b/include/asm-frv/ioctl.h
new file mode 100644
index 000000000000..8aee76905545
--- /dev/null
+++ b/include/asm-frv/ioctl.h
@@ -0,0 +1,80 @@
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASM_IOCTL_H
+#define _ASM_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * I don't really have any idea about what this should look like, so
+ * for the time being, this is heavily based on the PC definitions.
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IOCTL_H */
+
diff --git a/include/asm-frv/ioctls.h b/include/asm-frv/ioctls.h
new file mode 100644
index 000000000000..341c7ddef2a3
--- /dev/null
+++ b/include/asm-frv/ioctls.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_IOCTLS_H__
+#define __ASM_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_IOCTLS_H__ */
+
diff --git a/include/asm-frv/ipc.h b/include/asm-frv/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-frv/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-frv/ipcbuf.h b/include/asm-frv/ipcbuf.h
new file mode 100644
index 000000000000..b546f67e455f
--- /dev/null
+++ b/include/asm-frv/ipcbuf.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_IPCBUF_H__
+#define __ASM_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_IPCBUF_H__ */
+
diff --git a/include/asm-frv/irc-regs.h b/include/asm-frv/irc-regs.h
new file mode 100644
index 000000000000..afa30aeacc82
--- /dev/null
+++ b/include/asm-frv/irc-regs.h
@@ -0,0 +1,53 @@
+/* irc-regs.h: on-chip interrupt controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRC_REGS
+#define _ASM_IRC_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_TM0()	({ __reg(0xfeff9800); })
+#define __get_TM1()	({ __reg(0xfeff9808); })
+#define __set_TM1(V)	do { __reg(0xfeff9808) = (V); mb(); } while(0)
+
+#define __set_TM1x(XI,V)			\
+do {						\
+	int shift = (XI) * 2 + 16;		\
+	unsigned long tm1 = __reg(0xfeff9808);	\
+	tm1 &= ~(0x3 << shift);			\
+	tm1 |= (V) << shift;			\
+	__reg(0xfeff9808) = tm1;		\
+	mb();					\
+} while(0)
+
+#define __get_RS(C)	({ (__reg(0xfeff9810) >> ((C)+16)) & 1; })
+
+#define __clr_RC(C)	do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0)
+
+#define __get_MASK(C)	({ (__reg(0xfeff9820) >> ((C)+16)) & 1; })
+#define __set_MASK(C)	do { __reg(0xfeff9820) |=  1 << ((C)+16); mb(); } while(0)
+#define __clr_MASK(C)	do { __reg(0xfeff9820) &=  ~(1 << ((C)+16)); mb(); } while(0)
+
+#define __get_MASK_all() __get_MASK(0)
+#define __set_MASK_all() __set_MASK(0)
+#define __clr_MASK_all() __clr_MASK(0)
+
+#define __get_IRL()	({ (__reg(0xfeff9828) >> 16) & 0xf; })
+#define __clr_IRL()	do { __reg(0xfeff9828) = 0x100000; mb(); } while(0)
+
+#define __get_IRR(N)	({ __reg(0xfeff9840 + (N) * 8); })
+#define __set_IRR(N,V)	do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0)
+
+#define __get_IITMR(N)	({ __reg(0xfeff9880 + (N) * 8); })
+#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0)
+
+
+#endif /* _ASM_IRC_REGS */
diff --git a/include/asm-frv/irq-routing.h b/include/asm-frv/irq-routing.h
new file mode 100644
index 000000000000..686fb2b39d6a
--- /dev/null
+++ b/include/asm-frv/irq-routing.h
@@ -0,0 +1,70 @@
+/* irq-routing.h: multiplexed IRQ routing
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_ROUTING_H
+#define _ASM_IRQ_ROUTING_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+
+struct irq_source;
+struct irq_level;
+
+/*
+ * IRQ action distribution sets
+ */
+struct irq_group {
+	int			first_irq;	/* first IRQ distributed here */
+	void (*control)(struct irq_group *group, int index, int on);
+
+	struct irqaction	*actions[NR_IRQ_ACTIONS_PER_GROUP];	/* IRQ action chains */
+	struct irq_source	*sources[NR_IRQ_ACTIONS_PER_GROUP];	/* IRQ sources */
+	int			disable_cnt[NR_IRQ_ACTIONS_PER_GROUP];	/* disable counts */
+};
+
+/*
+ * IRQ source manager
+ */
+struct irq_source {
+	struct irq_source	*next;
+	struct irq_level	*level;
+	const char		*muxname;
+	volatile void __iomem	*muxdata;
+	unsigned long		irqmask;
+
+	void (*doirq)(struct irq_source *source);
+};
+
+/*
+ * IRQ level management (per CPU IRQ priority / entry vector)
+ */
+struct irq_level {
+	int			usage;
+	int			disable_count;
+	unsigned long		flags;		/* current SA_INTERRUPT and SA_SHIRQ settings */
+	spinlock_t		lock;
+	struct irq_source	*sources;
+};
+
+extern struct irq_level frv_irq_levels[16];
+extern struct irq_group *irq_groups[NR_IRQ_GROUPS];
+
+extern void frv_irq_route(struct irq_source *source, int irqlevel);
+extern void frv_irq_route_external(struct irq_source *source, int irq);
+extern void frv_irq_set_group(struct irq_group *group);
+extern void distribute_irqs(struct irq_group *group, unsigned long irqmask);
+extern void route_cpu_irqs(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IRQ_ROUTING_H */
diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h
new file mode 100644
index 000000000000..2c16d8dc02fd
--- /dev/null
+++ b/include/asm-frv/irq.h
@@ -0,0 +1,44 @@
+/* irq.h: FRV IRQ definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_H_
+#define _ASM_IRQ_H_
+
+#include <linux/config.h>
+
+/*
+ * the system has an on-CPU PIC and another PIC on the FPGA and other PICs on other peripherals,
+ * so we do some routing in irq-routing.[ch] to reduce the number of false-positives seen by
+ * drivers
+ */
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ				(-1)
+
+#define NR_IRQ_LOG2_ACTIONS_PER_GROUP	5
+#define NR_IRQ_ACTIONS_PER_GROUP	(1 << NR_IRQ_LOG2_ACTIONS_PER_GROUP)
+#define NR_IRQ_GROUPS			4
+#define NR_IRQS				(NR_IRQ_ACTIONS_PER_GROUP * NR_IRQ_GROUPS)
+
+/* probe returns a 32-bit IRQ mask:-/ */
+#define MIN_PROBE_IRQ	(NR_IRQS - 32)
+
+static inline int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern void disable_irq_nosync(unsigned int irq);
+extern void disable_irq(unsigned int irq);
+extern void enable_irq(unsigned int irq);
+
+
+#endif /* _ASM_IRQ_H_ */
diff --git a/include/asm-frv/kmap_types.h b/include/asm-frv/kmap_types.h
new file mode 100644
index 000000000000..f8e16b2a5804
--- /dev/null
+++ b/include/asm-frv/kmap_types.h
@@ -0,0 +1,29 @@
+
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	/* arch specific kmaps - change the numbers attached to these at your peril */
+	__KM_CACHE,		/* cache flush page attachment point */
+	__KM_PGD,		/* current page directory */
+	__KM_ITLB_PTD,		/* current instruction TLB miss page table lookup */
+	__KM_DTLB_PTD,		/* current data TLB miss page table lookup */
+
+	/* general kmaps */
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-frv/linkage.h b/include/asm-frv/linkage.h
new file mode 100644
index 000000000000..636c1bced7d4
--- /dev/null
+++ b/include/asm-frv/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN		.align 4
+#define __ALIGN_STR	".align 4"
+
+#endif
diff --git a/include/asm-frv/local.h b/include/asm-frv/local.h
new file mode 100644
index 000000000000..c27bdf04630e
--- /dev/null
+++ b/include/asm-frv/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_LOCAL_H */
diff --git a/include/asm-frv/math-emu.h b/include/asm-frv/math-emu.h
new file mode 100644
index 000000000000..0c8f731b2180
--- /dev/null
+++ b/include/asm-frv/math-emu.h
@@ -0,0 +1,301 @@
+#ifndef _ASM_MATH_EMU_H
+#define _ASM_MATH_EMU_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX	3
+#define FPSR_AEXC_DZ	4
+#define FPSR_AEXC_UNFL	5
+#define FPSR_AEXC_OVFL	6
+#define FPSR_AEXC_IOP	7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1	8
+#define FPSR_EXC_INEX2	9
+#define FPSR_EXC_DZ	10
+#define FPSR_EXC_UNFL	11
+#define FPSR_EXC_OVFL	12
+#define FPSR_EXC_OPERR	13
+#define FPSR_EXC_SNAN	14
+#define FPSR_EXC_BSUN	15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN	24
+#define FPSR_CC_INF	25
+#define FPSR_CC_Z	26
+#define FPSR_CC_NEG	27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define	FPCR_ROUND_RN	0		/* round to nearest/even */
+#define FPCR_ROUND_RZ	1		/* round to zero */
+#define FPCR_ROUND_RM	2		/* minus infinity */
+#define FPCR_ROUND_RP	3		/* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X	0	/* long double */
+#define FPCR_PRECISION_S	1	/* double */
+#define FPCR_PRECISION_D	2	/* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE		0
+#define PEXECUTE	1
+#define PCONV		2
+#define PNORM		3
+#define PREGISTER	4
+#define PINSTR		5
+#define PUNIMPL		6
+#define PMOVEM		7
+
+#define PMDECODE	(1<<PDECODE)
+#define PMEXECUTE	(1<<PEXECUTE)
+#define PMCONV		(1<<PCONV)
+#define PMNORM		(1<<PNORM)
+#define PMREGISTER	(1<<PREGISTER)
+#define PMINSTR		(1<<PINSTR)
+#define PMUNIMPL	(1<<PUNIMPL)
+#define PMMOVEM		(1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+	unsigned long long m64;
+	unsigned long m32[2];
+};
+
+union fp_mant128 {
+	unsigned long long m64[2];
+	unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+	unsigned char lowmant;
+	unsigned char sign;
+	unsigned short exp;
+	union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+	struct fp_ext fpreg[8];
+	unsigned int fpcr;
+	unsigned int fpsr;
+	unsigned int fpiar;
+	unsigned short prec;
+	unsigned short rnd;
+	struct fp_ext temp[2];
+};
+
+#if FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({			\
+	if (fp_debugprint & (1 << (bit)))		\
+		printk(fmt, ## args);			\
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({					\
+	static int __count = 3;				\
+							\
+	if (__count > 0) {				\
+		printk("You just hit an unimplemented "	\
+		       "fpu instruction (%s)\n", str);	\
+		printk("Please report this to ....\n");	\
+		__count--;				\
+	}						\
+})
+
+#define FPDATA		((struct fp_data *)current->thread.fp)
+
+#else	/* __ASSEMBLY__ */
+
+#define FPDATA		%a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG	(TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR	(TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR	(TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR	(TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC	(TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND		(TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1	(TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2	(TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF	(TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO		(PT_D0)
+#define FPS_D1		(PT_D1)
+#define FPS_D2		(PT_D2)
+#define FPS_A0		(PT_A0)
+#define FPS_A1		(PT_A1)
+#define FPS_A2		(PT_A2)
+#define FPS_SR		(PT_SR)
+#define FPS_PC		(PT_PC)
+#define FPS_EA		(PT_PC+6)
+#define FPS_PC2		(PT_PC+10)
+
+.macro	fp_get_fp_reg
+	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
+	lea	(%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro	fp_get_pc dest
+	move.l	(FPS_PC+4,%sp),\dest
+.endm
+
+.macro	fp_put_pc src,jump=0
+	move.l	\src,(FPS_PC+4,%sp)
+.endm
+
+.macro	fp_get_instr_data	f,s,dest,label
+	getuser	\f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+	addq.l	#\s,%sp@(FPS_PC+4)
+.endm
+
+.macro	fp_get_instr_word	dest,label,addr
+	fp_get_instr_data	w,2,\dest,\label,\addr
+.endm
+
+.macro	fp_get_instr_long	dest,label,addr
+	fp_get_instr_data	l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro	getuser	size,src,dest,label,addr
+|	printf	,"[\size<%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+
+	.section .fixup,"ax"
+	.even
+.Lu2\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu2\@
+	.previous
+.endm
+
+.macro	putuser	size,src,dest,label,addr
+|	printf	,"[\size>%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+.Lu2\@:
+
+	.section .fixup,"ax"
+	.even
+.Lu3\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu3\@
+	.long	.Lu2\@,.Lu3\@
+	.previous
+.endm
+
+
+.macro	movestack	nr,arg1,arg2,arg3,arg4,arg5
+	.if	\nr
+	movestack	(\nr-1),\arg2,\arg3,\arg4,\arg5
+	move.l	\arg1,-(%sp)
+	.endif
+.endm
+
+.macro	printf	bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+	.data
+.Lpdata\@:
+	.string	"\string"
+	.previous
+
+	movem.l	%d0/%d1/%a0/%a1,-(%sp)
+	.if	\bit+1
+#if 0
+	moveq	#\bit,%d0
+	andw	#7,%d0
+	btst	%d0,fp_debugprint+((31-\bit)/8)
+#else
+	btst	#\bit,fp_debugprint+((31-\bit)/8)
+#endif
+	jeq	.Lpskip\@
+	.endif
+	movestack	\nr,\arg1,\arg2,\arg3,\arg4,\arg5
+	pea	.Lpdata\@
+	jsr	printk
+	lea	((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+	movem.l	(%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro	printx	bit,fp
+#ifdef FPU_EMU_DEBUG
+	movem.l	%d0/%a0,-(%sp)
+	lea	\fp,%a0
+#if 0
+	moveq	#'+',%d0
+	tst.w	(%a0)
+	jeq	.Lx1\@
+	moveq	#'-',%d0
+.Lx1\@:	printf	\bit," %c",1,%d0
+	move.l	(4,%a0),%d0
+	bclr	#31,%d0
+	jne	.Lx2\@
+	printf	\bit,"0."
+	jra	.Lx3\@
+.Lx2\@:	printf	\bit,"1."
+.Lx3\@:	printf	\bit,"%08x%08x",2,%d0,%a0@(8)
+	move.w	(2,%a0),%d0
+	ext.l	%d0
+	printf	\bit,"E%04x",1,%d0
+#else
+	printf	\bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+	movem.l	(%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro	debug	instr,args
+#ifdef FPU_EMU_DEBUG
+	\instr	\args
+#endif
+.endm
+
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_FRV_MATH_EMU_H */
+
diff --git a/include/asm-frv/mb-regs.h b/include/asm-frv/mb-regs.h
new file mode 100644
index 000000000000..c8f575fc42fa
--- /dev/null
+++ b/include/asm-frv/mb-regs.h
@@ -0,0 +1,185 @@
+/* mb-regs.h: motherboard registers
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB_REGS_H
+#define _ASM_MB_REGS_H
+
+#include <asm/cpu-irqs.h>
+#include <asm/sections.h>
+#include <asm/mem-layout.h>
+
+#define __region_IO	KERNEL_IO_START	/* the region from 0xe0000000 to 0xffffffff has suitable
+					 * protection laid over the top for use in memory-mapped
+					 * I/O
+					 */
+
+#define __region_CS0	0xff000000	/* Boot ROMs area */
+
+#ifdef CONFIG_MB93091_VDK
+/*
+ * VDK motherboard and CPU card specific stuff
+ */
+
+#include <asm/mb93091-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0	IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1	IRQ_CPU_EXTERNAL1
+
+#define __region_CS2	0xe0000000	/* SLBUS/PCI I/O space */
+#define __region_CS2_M		0x0fffffff /* mask */
+#define __region_CS2_C		0x00000000 /* control */
+#define __region_CS5	0xf0000000	/* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M		0x00ffffff
+#define __region_CS5_C		0x00010000
+#define __region_CS7	0xf1000000	/* CB70 CPU-card PCMCIA port I/O space */
+#define __region_CS7_M		0x00ffffff
+#define __region_CS7_C		0x00410701
+#define __region_CS1	0xfc000000	/* SLBUS/PCI bridge control registers */
+#define __region_CS1_M		0x000fffff
+#define __region_CS1_C		0x00000000
+#define __region_CS6	0xfc100000	/* CB70 CPU-card DM9000 LAN I/O space */
+#define __region_CS6_M		0x000fffff
+#define __region_CS6_C		0x00400707
+#define __region_CS3	0xfc200000	/* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M		0x000fffff
+#define __region_CS3_C		0xc8100000
+#define __region_CS4	0xfd000000	/* CB70 CPU-card extra flash space */
+#define __region_CS4_M		0x00ffffff
+#define __region_CS4_C		0x00000f07
+
+#define __region_PCI_IO		(__region_CS2 + 0x04000000UL)
+#define __region_PCI_MEM	(__region_CS2 + 0x08000000UL)
+#define __flush_PCI_writes()						\
+do {									\
+	__builtin_write8((volatile void *) __region_PCI_MEM, 0);	\
+} while(0)
+
+#define __is_PCI_IO(addr) \
+	(((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24)  < (0x04000000UL >> 24))
+
+#define __is_PCI_MEM(addr) \
+	((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL)
+
+#define __get_CLKSW()	({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; })
+#define __get_CLKIN()	(__get_CLKSW() * 125U * 100000U / 24U)
+
+#ifndef __ASSEMBLY__
+extern int __nongprelbss mb93090_mb00_detected;
+#endif
+
+#define __addr_LEDS()		(__region_CS2 + 0x01200004UL)
+#ifdef CONFIG_MB93090_MB00
+#define __set_LEDS(X)							\
+do {									\
+	if (mb93090_mb00_detected)					\
+		__builtin_write32((void *) __addr_LEDS(), ~(X));	\
+} while (0)
+#else
+#define __set_LEDS(X)
+#endif
+
+#define __addr_LCD()		(__region_CS2 + 0x01200008UL)
+#define __get_LCD(B)		__builtin_read32((volatile void *) (B))
+#define __set_LCD(B,X)		__builtin_write32((volatile void *) (B), (X))
+
+#define LCD_D			0x000000ff		/* LCD data bus */
+#define LCD_RW			0x00000100		/* LCD R/W signal */
+#define LCD_RS			0x00000200		/* LCD Register Select */
+#define LCD_E			0x00000400		/* LCD Start Enable Signal */
+
+#define LCD_CMD_CLEAR		(LCD_E|0x001)
+#define LCD_CMD_HOME		(LCD_E|0x002)
+#define LCD_CMD_CURSOR_INC	(LCD_E|0x004)
+#define LCD_CMD_SCROLL_INC	(LCD_E|0x005)
+#define LCD_CMD_CURSOR_DEC	(LCD_E|0x006)
+#define LCD_CMD_SCROLL_DEC	(LCD_E|0x007)
+#define LCD_CMD_OFF		(LCD_E|0x008)
+#define LCD_CMD_ON(CRSR,BLINK)	(LCD_E|0x00c|(CRSR<<1)|BLINK)
+#define LCD_CMD_CURSOR_MOVE_L	(LCD_E|0x010)
+#define LCD_CMD_CURSOR_MOVE_R	(LCD_E|0x014)
+#define LCD_CMD_DISPLAY_SHIFT_L	(LCD_E|0x018)
+#define LCD_CMD_DISPLAY_SHIFT_R	(LCD_E|0x01c)
+#define LCD_CMD_FUNCSET(DL,N,F)	(LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2))
+#define LCD_CMD_SET_CG_ADDR(X)	(LCD_E|0x040|X)
+#define LCD_CMD_SET_DD_ADDR(X)	(LCD_E|0x080|X)
+#define LCD_CMD_READ_BUSY	(LCD_E|LCD_RW)
+#define LCD_DATA_WRITE(X)	(LCD_E|LCD_RS|(X))
+#define LCD_DATA_READ		(LCD_E|LCD_RS|LCD_RW)
+
+#else
+/*
+ * PDK unit specific stuff
+ */
+
+#include <asm/mb93093-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0	IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1	IRQ_CPU_EXTERNAL1
+
+#define __region_CS5	0xf0000000	/* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M		0x00ffffff /* mask */
+#define __region_CS5_C		0x00010000 /* control */
+#define __region_CS2	0x20000000	/* FPGA registers */
+#define __region_CS2_M		0x000fffff
+#define __region_CS2_C		0x00000000
+#define __region_CS1	0xfc100000	/* LAN registers */
+#define __region_CS1_M		0x000fffff
+#define __region_CS1_C		0x00010404
+#define __region_CS3	0xfc200000	/* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M		0x000fffff
+#define __region_CS3_C		0xc8000000
+#define __region_CS4	0xfd000000	/* extra ROMs area */
+#define __region_CS4_M		0x00ffffff
+#define __region_CS4_C		0x00000f07
+
+#define __region_CS6	0xfe000000	/* not used - hide behind CPU resource I/O regs */
+#define __region_CS6_M		0x000fffff
+#define __region_CS6_C		0x00000f07
+#define __region_CS7	0xfe000000	/* not used - hide behind CPU resource I/O regs */
+#define __region_CS7_M		0x000fffff
+#define __region_CS7_C		0x00000f07
+
+#define __is_PCI_IO(addr)	0	/* no PCI */
+#define __is_PCI_MEM(addr)	0
+#define __region_PCI_IO		0
+#define __region_PCI_MEM	0
+#define __flush_PCI_writes()	do { } while(0)
+
+#define __get_CLKSW()		0UL
+#define __get_CLKIN()		66000000UL
+
+#define __addr_LEDS()		(__region_CS2 + 0x00000023UL)
+#define __set_LEDS(X)		__builtin_write8((volatile void *) __addr_LEDS(), (X))
+
+#define __addr_FPGATR()		(__region_CS2 + 0x00000030UL)
+#define __set_FPGATR(X)		__builtin_write32((volatile void *) __addr_FPGATR(), (X))
+#define __get_FPGATR()		__builtin_read32((volatile void *) __addr_FPGATR())
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK	0x00000003
+
+#define __set_FPGATR_AUDIO_CLK(V) \
+	__set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V))
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF	0x0
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz	0x1
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz	0x2
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz	0x3
+
+#define MB93093_FPGA_SWR_PUSHSWMASK	(0x1F<<26)
+#define MB93093_FPGA_SWR_PUSHSW4	(1<<29)
+
+#define __addr_FPGA_SWR		((volatile void *)(__region_CS2 + 0x28UL))
+#define __get_FPGA_PUSHSW1_5()	(__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK)
+
+
+#endif
+
+#endif /* _ASM_MB_REGS_H */
diff --git a/include/asm-frv/mb86943a.h b/include/asm-frv/mb86943a.h
new file mode 100644
index 000000000000..b89fd0b56bb3
--- /dev/null
+++ b/include/asm-frv/mb86943a.h
@@ -0,0 +1,39 @@
+/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB86943A_H
+#define _ASM_MB86943A_H
+
+#include <asm/mb-regs.h>
+
+#define __reg_MB86943_sl_ctl		*(volatile uint32_t *) (__region_CS1 + 0x00)
+
+#define MB86943_SL_CTL_BUS_WIDTH_64	0x00000001
+#define MB86943_SL_CTL_AS_HOST		0x00000002
+#define MB86943_SL_CTL_DRCT_MASTER_SWAP	0x00000004
+#define MB86943_SL_CTL_DRCT_SLAVE_SWAP	0x00000008
+#define MB86943_SL_CTL_PCI_CONFIG_SWAP	0x00000010
+#define MB86943_SL_CTL_ECS0_ENABLE	0x00000020
+#define MB86943_SL_CTL_ECS1_ENABLE	0x00000040
+#define MB86943_SL_CTL_ECS2_ENABLE	0x00000080
+
+#define __reg_MB86943_ecs_ctl(N)	*(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N)))
+#define __reg_MB86943_ecs_range(N)	*(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N)))
+#define __reg_MB86943_ecs_base(N)	*(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N)))
+
+#define __reg_MB86943_sl_pci_io_range	*(volatile uint32_t *) (__region_CS1 + 0x50)
+#define __reg_MB86943_sl_pci_io_base	*(volatile uint32_t *) (__region_CS1 + 0x58)
+#define __reg_MB86943_sl_pci_mem_range	*(volatile uint32_t *) (__region_CS1 + 0x60)
+#define __reg_MB86943_sl_pci_mem_base	*(volatile uint32_t *) (__region_CS1 + 0x68)
+#define __reg_MB86943_pci_sl_io_base	*(volatile uint32_t *) (__region_CS1 + 0x70)
+#define __reg_MB86943_pci_sl_mem_base	*(volatile uint32_t *) (__region_CS1 + 0x78)
+
+#endif /* _ASM_MB86943A_H */
diff --git a/include/asm-frv/mb93091-fpga-irqs.h b/include/asm-frv/mb93091-fpga-irqs.h
new file mode 100644
index 000000000000..341bfc52a0eb
--- /dev/null
+++ b/include/asm-frv/mb93091-fpga-irqs.h
@@ -0,0 +1,44 @@
+/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93091_FPGA_IRQS_H
+#define _ASM_MB93091_FPGA_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/irq-routing.h>
+
+#define IRQ_BASE_FPGA		(NR_IRQ_ACTIONS_PER_GROUP * 1)
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_FPGA__UNUSED			= IRQ_BASE_FPGA,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_1,
+	IRQ_FPGA_SL_BUS_EXPANSION_2,
+	IRQ_FPGA_PCI_INTD,
+	IRQ_FPGA_PCI_INTC,
+	IRQ_FPGA_PCI_INTB,
+	IRQ_FPGA_PCI_INTA,
+	IRQ_FPGA_SL_BUS_EXPANSION_7,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_8,
+	IRQ_FPGA_SL_BUS_EXPANSION_9,
+	IRQ_FPGA_MB86943_PCI_INTA,
+	IRQ_FPGA_MB86943_SLBUS_SIDE,
+	IRQ_FPGA_RTL8029_INTA,
+	IRQ_FPGA_SYSINT_BUS_EXPANSION_13,
+	IRQ_FPGA_SL_BUS_EXPANSION_14,
+	IRQ_FPGA_NMI,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93091_FPGA_IRQS_H */
diff --git a/include/asm-frv/mb93093-fpga-irqs.h b/include/asm-frv/mb93093-fpga-irqs.h
new file mode 100644
index 000000000000..1e0f11c2fcdb
--- /dev/null
+++ b/include/asm-frv/mb93093-fpga-irqs.h
@@ -0,0 +1,31 @@
+/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93093_FPGA_IRQS_H
+#define _ASM_MB93093_FPGA_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/irq-routing.h>
+
+#define IRQ_BASE_FPGA		(NR_IRQ_ACTIONS_PER_GROUP * 1)
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_FPGA_PUSH_BUTTON_SW1_5		= IRQ_BASE_FPGA + 8,
+	IRQ_FPGA_ROCKER_C_SW8			= IRQ_BASE_FPGA + 9,
+	IRQ_FPGA_ROCKER_C_SW9			= IRQ_BASE_FPGA + 10,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93093_FPGA_IRQS_H */
diff --git a/include/asm-frv/mb93493-irqs.h b/include/asm-frv/mb93493-irqs.h
new file mode 100644
index 000000000000..15096e731325
--- /dev/null
+++ b/include/asm-frv/mb93493-irqs.h
@@ -0,0 +1,52 @@
+/* mb93493-irqs.h: MB93493 companion chip IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_IRQS_H
+#define _ASM_MB93493_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/irq-routing.h>
+
+#define IRQ_BASE_MB93493	(NR_IRQ_ACTIONS_PER_GROUP * 2)
+
+/* IRQ IDs presented to drivers */
+enum {
+	IRQ_MB93493_VDC			= IRQ_BASE_MB93493 + 0,
+	IRQ_MB93493_VCC			= IRQ_BASE_MB93493 + 1,
+	IRQ_MB93493_AUDIO_OUT		= IRQ_BASE_MB93493 + 2,
+	IRQ_MB93493_I2C_0		= IRQ_BASE_MB93493 + 3,
+	IRQ_MB93493_I2C_1		= IRQ_BASE_MB93493 + 4,
+	IRQ_MB93493_USB			= IRQ_BASE_MB93493 + 5,
+	IRQ_MB93493_LOCAL_BUS		= IRQ_BASE_MB93493 + 7,
+	IRQ_MB93493_PCMCIA		= IRQ_BASE_MB93493 + 8,
+	IRQ_MB93493_GPIO		= IRQ_BASE_MB93493 + 9,
+	IRQ_MB93493_AUDIO_IN		= IRQ_BASE_MB93493 + 10,
+};
+
+/* IRQ multiplexor mappings */
+#define ROUTE_VIA_IRQ0	0	/* route IRQ by way of CPU external IRQ 0 */
+#define ROUTE_VIA_IRQ1	1	/* route IRQ by way of CPU external IRQ 1 */
+
+#define IRQ_MB93493_VDC_ROUTE		ROUTE_VIA_IRQ0
+#define IRQ_MB93493_VCC_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_OUT_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_0_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_1_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_USB_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_LOCAL_BUS_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_PCMCIA_ROUTE	ROUTE_VIA_IRQ1
+#define IRQ_MB93493_GPIO_ROUTE		ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_IN_ROUTE	ROUTE_VIA_IRQ1
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93493_IRQS_H */
diff --git a/include/asm-frv/mb93493-regs.h b/include/asm-frv/mb93493-regs.h
new file mode 100644
index 000000000000..c54aa9d14468
--- /dev/null
+++ b/include/asm-frv/mb93493-regs.h
@@ -0,0 +1,279 @@
+/* mb93493-regs.h: MB93493 companion chip registers
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_REGS_H
+#define _ASM_MB93493_REGS_H
+
+#include <asm/mb-regs.h>
+#include <asm/mb93493-irqs.h>
+
+#define __get_MB93493(X)	({ *(volatile unsigned long *)(__region_CS3 + (X)); })
+
+#define __set_MB93493(X,V)						\
+do {									\
+	*(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb();	\
+} while(0)
+
+#define __get_MB93493_STSR(X)	__get_MB93493(0x3c0 + (X) * 4)
+#define __set_MB93493_STSR(X,V)	__set_MB93493(0x3c0 + (X) * 4, (V))
+#define MB93493_STSR_EN
+
+#define __get_MB93493_IQSR(X)	__get_MB93493(0x3d0 + (X) * 4)
+#define __set_MB93493_IQSR(X,V)	__set_MB93493(0x3d0 + (X) * 4, (V))
+
+#define __get_MB93493_DQSR(X)	__get_MB93493(0x3e0 + (X) * 4)
+#define __set_MB93493_DQSR(X,V)	__set_MB93493(0x3e0 + (X) * 4, (V))
+
+#define __get_MB93493_LBSER()	__get_MB93493(0x3f0)
+#define __set_MB93493_LBSER(V)	__set_MB93493(0x3f0, (V))
+
+#define MB93493_LBSER_VDC	0x00010000
+#define MB93493_LBSER_VCC	0x00020000
+#define MB93493_LBSER_AUDIO	0x00040000
+#define MB93493_LBSER_I2C_0	0x00080000
+#define MB93493_LBSER_I2C_1	0x00100000
+#define MB93493_LBSER_USB	0x00200000
+#define MB93493_LBSER_GPIO	0x00800000
+#define MB93493_LBSER_PCMCIA	0x01000000
+
+#define __get_MB93493_LBSR()	__get_MB93493(0x3fc)
+#define __set_MB93493_LBSR(V)	__set_MB93493(0x3fc, (V))
+
+/*
+ * video display controller
+ */
+#define __get_MB93493_VDC(X)	__get_MB93493(MB93493_VDC_##X)
+#define __set_MB93493_VDC(X,V)	__set_MB93493(MB93493_VDC_##X, (V))
+
+#define MB93493_VDC_RCURSOR	0x140	/* cursor position */
+#define MB93493_VDC_RCT1	0x144	/* cursor colour 1 */
+#define MB93493_VDC_RCT2	0x148	/* cursor colour 2 */
+#define MB93493_VDC_RHDC	0x150	/* horizontal display period */
+#define MB93493_VDC_RH_MARGINS	0x154	/* horizontal margin sizes */
+#define MB93493_VDC_RVDC	0x158	/* vertical display period */
+#define MB93493_VDC_RV_MARGINS	0x15c	/* vertical margin sizes */
+#define MB93493_VDC_RC		0x170	/* VDC control */
+#define MB93493_VDC_RCLOCK	0x174	/* clock divider, DMA req delay */
+#define MB93493_VDC_RBLACK	0x178	/* black insert sizes */
+#define MB93493_VDC_RS		0x17c	/* VDC status */
+
+#define __addr_MB93493_VDC_BCI(X)  ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); })
+#define __addr_MB93493_VDC_TPO(X)  (__region_CS3 + 0x1c0 + (X))
+
+#define VDC_TPO_WIDTH		32
+
+#define VDC_RC_DSR		0x00000080	/* VDC master reset */
+
+#define VDC_RS_IT		0x00060000	/* interrupt indicators */
+#define VDC_RS_IT_UNDERFLOW	0x00040000	/* - underflow event */
+#define VDC_RS_IT_VSYNC		0x00020000	/* - VSYNC event */
+#define VDC_RS_DFI		0x00010000	/* current interlace field number */
+#define VDC_RS_DFI_TOP		0x00000000	/* - top field */
+#define VDC_RS_DFI_BOTTOM	0x00010000	/* - bottom field */
+#define VDC_RS_DCSR		0x00000010	/* cursor state */
+#define VDC_RS_DCM		0x00000003	/* display mode */
+#define VDC_RS_DCM_DISABLED	0x00000000	/* - display disabled */
+#define VDC_RS_DCM_STOPPED	0x00000001	/* - VDC stopped */
+#define VDC_RS_DCM_FREERUNNING	0x00000002	/* - VDC free-running */
+#define VDC_RS_DCM_TRANSFERRING	0x00000003	/* - data being transferred to VDC */
+
+/*
+ * video capture controller
+ */
+#define __get_MB93493_VCC(X)	__get_MB93493(MB93493_VCC_##X)
+#define __set_MB93493_VCC(X,V)	__set_MB93493(MB93493_VCC_##X, (V))
+
+#define MB93493_VCC_RREDUCT	0x104	/* reduction rate */
+#define MB93493_VCC_RHY		0x108	/* horizontal brightness filter coefficients */
+#define MB93493_VCC_RHC		0x10c	/* horizontal colour-difference filter coefficients */
+#define MB93493_VCC_RHSIZE	0x110	/* horizontal cycle sizes */
+#define MB93493_VCC_RHBC	0x114	/* horizontal back porch size */
+#define MB93493_VCC_RVCC	0x118	/* vertical capture period */
+#define MB93493_VCC_RVBC	0x11c	/* vertical back porch period */
+#define MB93493_VCC_RV		0x120	/* vertical filter coefficients */
+#define MB93493_VCC_RDTS	0x128	/* DMA transfer size */
+#define MB93493_VCC_RDTS_4B	0x01000000	/* 4-byte transfer */
+#define MB93493_VCC_RDTS_32B	0x03000000	/* 32-byte transfer */
+#define MB93493_VCC_RDTS_SHIFT	24
+#define MB93493_VCC_RCC		0x130	/* VCC control */
+#define MB93493_VCC_RIS		0x134	/* VCC interrupt status */
+
+#define __addr_MB93493_VCC_TPI(X)  (__region_CS3 + 0x180 + (X))
+
+#define VCC_RHSIZE_RHCC		0x000007ff
+#define VCC_RHSIZE_RHCC_SHIFT	0
+#define VCC_RHSIZE_RHTCC	0x0fff0000
+#define VCC_RHSIZE_RHTCC_SHIFT	16
+
+#define VCC_RVBC_RVBC		0x00003f00
+#define VCC_RVBC_RVBC_SHIFT	8
+
+#define VCC_RREDUCT_RHR		0x07ff0000
+#define VCC_RREDUCT_RHR_SHIFT	16
+#define VCC_RREDUCT_RVR		0x000007ff
+#define VCC_RREDUCT_RVR_SHIFT	0
+
+#define VCC_RCC_CE		0x00000001	/* VCC enable */
+#define VCC_RCC_CS		0x00000002	/* request video capture start */
+#define VCC_RCC_CPF		0x0000000c	/* pixel format */
+#define VCC_RCC_CPF_YCBCR_16	0x00000000	/* - YCbCr 4:2:2 16-bit format */
+#define VCC_RCC_CPF_RGB		0x00000004	/* - RGB 4:4:4 format */
+#define VCC_RCC_CPF_YCBCR_24	0x00000008	/* - YCbCr 4:2:2 24-bit format */
+#define VCC_RCC_CPF_BT656	0x0000000c	/* - ITU R-BT.656 format */
+#define VCC_RCC_CPF_SHIFT	2
+#define VCC_RCC_CSR		0x00000080	/* request reset */
+#define VCC_RCC_HSIP		0x00000100	/* HSYNC polarity */
+#define VCC_RCC_HSIP_LOACT	0x00000000	/* - low active */
+#define VCC_RCC_HSIP_HIACT	0x00000100	/* - high active */
+#define VCC_RCC_VSIP		0x00000200	/* VSYNC polarity */
+#define VCC_RCC_VSIP_LOACT	0x00000000	/* - low active */
+#define VCC_RCC_VSIP_HIACT	0x00000200	/* - high active */
+#define VCC_RCC_CIE		0x00000800	/* interrupt enable */
+#define VCC_RCC_CFP		0x00001000	/* RGB pixel packing */
+#define VCC_RCC_CFP_4TO3	0x00000000	/* - pack 4 pixels into 3 words */
+#define VCC_RCC_CFP_1TO1	0x00001000	/* - pack 1 pixel into 1 words */
+#define VCC_RCC_CSM		0x00006000	/* interlace specification */
+#define VCC_RCC_CSM_ONEPASS	0x00002000	/* - non-interlaced */
+#define VCC_RCC_CSM_INTERLACE	0x00004000	/* - interlaced */
+#define VCC_RCC_CSM_SHIFT	13
+#define VCC_RCC_ES		0x00008000	/* capture start polarity */
+#define VCC_RCC_ES_NEG		0x00000000	/* - negative edge */
+#define VCC_RCC_ES_POS		0x00008000	/* - positive edge */
+#define VCC_RCC_IFI		0x00080000	/* inferlace field evaluation reverse */
+#define VCC_RCC_FDTS		0x00300000	/* interlace field start */
+#define VCC_RCC_FDTS_3_8	0x00000000	/* - 3/8 of horizontal entire cycle */
+#define VCC_RCC_FDTS_1_4	0x00100000	/* - 1/4 of horizontal entire cycle */
+#define VCC_RCC_FDTS_7_16	0x00200000	/* - 7/16 of horizontal entire cycle */
+#define VCC_RCC_FDTS_SHIFT	20
+#define VCC_RCC_MOV		0x00400000	/* test bit - always set to 1 */
+#define VCC_RCC_STP		0x00800000	/* request video capture stop */
+#define VCC_RCC_TO		0x01000000	/* input during top-field only */
+
+#define VCC_RIS_VSYNC		0x01000000	/* VSYNC interrupt */
+#define VCC_RIS_OV		0x02000000	/* overflow interrupt */
+#define VCC_RIS_BOTTOM		0x08000000	/* interlace bottom field */
+#define VCC_RIS_STARTED		0x10000000	/* capture started */
+
+/*
+ * I2C
+ */
+#define MB93493_I2C_BSR 	0x340		/* bus status */
+#define MB93493_I2C_BCR		0x344		/* bus control */
+#define MB93493_I2C_CCR		0x348		/* clock control */
+#define MB93493_I2C_ADR		0x34c		/* address */
+#define MB93493_I2C_DTR		0x350		/* data */
+#define MB93493_I2C_BC2R	0x35c		/* bus control 2 */
+
+#define __addr_MB93493_I2C(port,X)   (__region_CS3 + MB93493_I2C_##X + ((port)*0x20))
+#define __get_MB93493_I2C(port,X)    __get_MB93493(MB93493_I2C_##X + ((port)*0x20))
+#define __set_MB93493_I2C(port,X,V)  __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V))
+
+#define I2C_BSR_BB	(1 << 7)
+
+/*
+ * audio controller (I2S) registers
+ */
+#define __get_MB93493_I2S(X)	__get_MB93493(MB93493_I2S_##X)
+#define __set_MB93493_I2S(X,V)	__set_MB93493(MB93493_I2S_##X, (V))
+
+#define MB93493_I2S_ALDR	0x300		/* L-channel data */
+#define MB93493_I2S_ARDR	0x304		/* R-channel data */
+#define MB93493_I2S_APDR	0x308		/* 16-bit packed data */
+#define MB93493_I2S_AISTR	0x310		/* status */
+#define MB93493_I2S_AICR	0x314		/* control */
+
+#define __addr_MB93493_I2S_ALDR(X)	(__region_CS3 + MB93493_I2S_ALDR + (X))
+#define __addr_MB93493_I2S_ARDR(X)	(__region_CS3 + MB93493_I2S_ARDR + (X))
+#define __addr_MB93493_I2S_APDR(X)	(__region_CS3 + MB93493_I2S_APDR + (X))
+#define __addr_MB93493_I2S_ADR(X)	(__region_CS3 + 0x320 + (X))
+
+#define I2S_AISTR_OTST		0x00000003	/* status of output data transfer */
+#define I2S_AISTR_OTR		0x00000010	/* output transfer request pending */
+#define I2S_AISTR_OUR		0x00000020	/* output FIFO underrun detected */
+#define I2S_AISTR_OOR		0x00000040	/* output FIFO overrun detected */
+#define I2S_AISTR_ODS		0x00000100	/* output DMA transfer size */
+#define I2S_AISTR_ODE		0x00000400	/* output DMA transfer request enable */
+#define I2S_AISTR_OTRIE		0x00001000	/* output transfer request interrupt enable */
+#define I2S_AISTR_OURIE		0x00002000	/* output FIFO underrun interrupt enable */
+#define I2S_AISTR_OORIE		0x00004000	/* output FIFO overrun interrupt enable */
+#define I2S_AISTR__OUT_MASK	0x00007570
+#define I2S_AISTR_ITST		0x00030000	/* status of input data transfer */
+#define I2S_AISTR_ITST_SHIFT	16
+#define I2S_AISTR_ITR		0x00100000	/* input transfer request pending */
+#define I2S_AISTR_IUR		0x00200000	/* input FIFO underrun detected */
+#define I2S_AISTR_IOR		0x00400000	/* input FIFO overrun detected */
+#define I2S_AISTR_IDS		0x01000000	/* input DMA transfer size */
+#define I2S_AISTR_IDE		0x04000000	/* input DMA transfer request enable */
+#define I2S_AISTR_ITRIE		0x10000000	/* input transfer request interrupt enable */
+#define I2S_AISTR_IURIE		0x20000000	/* input FIFO underrun interrupt enable */
+#define I2S_AISTR_IORIE		0x40000000	/* input FIFO overrun interrupt enable */
+#define I2S_AISTR__IN_MASK	0x75700000
+
+#define I2S_AICR_MI		0x00000001	/* mono input requested */
+#define I2S_AICR_AMI		0x00000002	/* relation between LRCKI/FS1 and SDI */
+#define I2S_AICR_LRI		0x00000004	/* function of LRCKI pin */
+#define I2S_AICR_SDMI		0x00000070	/* format of input audio data */
+#define I2S_AICR_SDMI_SHIFT	4
+#define I2S_AICR_CLI		0x00000080	/* input FIFO clearing control */
+#define I2S_AICR_IM		0x00000300	/* input state control */
+#define I2S_AICR_IM_SHIFT	8
+#define I2S_AICR__IN_MASK	0x000003f7
+#define I2S_AICR_MO		0x00001000	/* mono output requested */
+#define I2S_AICR_AMO		0x00002000	/* relation between LRCKO/FS0 and SDO */
+#define I2S_AICR_AMO_SHIFT	13
+#define I2S_AICR_LRO		0x00004000	/* function of LRCKO pin */
+#define I2S_AICR_SDMO		0x00070000	/* format of output audio data */
+#define I2S_AICR_SDMO_SHIFT	16
+#define I2S_AICR_CLO		0x00080000	/* output FIFO clearing control */
+#define I2S_AICR_OM		0x00100000	/* output state control */
+#define I2S_AICR__OUT_MASK	0x001f7000
+#define I2S_AICR_DIV		0x03000000	/* frequency division rate */
+#define I2S_AICR_DIV_SHIFT	24
+#define I2S_AICR_FL		0x20000000	/* frame length */
+#define I2S_AICR_FS		0x40000000	/* frame sync method */
+#define I2S_AICR_ME		0x80000000	/* master enable */
+
+/*
+ * PCMCIA
+ */
+#define __addr_MB93493_PCMCIA(X)  ((volatile unsigned long *)(__region_CS5 + (X)))
+
+/*
+ * GPIO
+ */
+#define __get_MB93493_GPIO_PDR(X)	__get_MB93493(0x380 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDR(X,V)	__set_MB93493(0x380 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_GPDR(X)	__get_MB93493(0x384 + (X) * 0xc0)
+#define __set_MB93493_GPIO_GPDR(X,V)	__set_MB93493(0x384 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SIR(X)	__get_MB93493(0x388 + (X) * 0xc0)
+#define __set_MB93493_GPIO_SIR(X,V)	__set_MB93493(0x388 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SOR(X)	__get_MB93493(0x38c + (X) * 0xc0)
+#define __set_MB93493_GPIO_SOR(X,V)	__set_MB93493(0x38c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDSR(X)	__get_MB93493(0x390 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDSR(X,V)	__set_MB93493(0x390 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDCR(X)	__get_MB93493(0x394 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDCR(X,V)	__set_MB93493(0x394 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_INTST(X)	__get_MB93493(0x398 + (X) * 0xc0)
+#define __set_MB93493_GPIO_INTST(X,V)	__set_MB93493(0x398 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IEHL(X)	__get_MB93493(0x39c + (X) * 0xc0)
+#define __set_MB93493_GPIO_IEHL(X,V)	__set_MB93493(0x39c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IELH(X)	__get_MB93493(0x3a0 + (X) * 0xc0)
+#define __set_MB93493_GPIO_IELH(X,V)	__set_MB93493(0x3a0 + (X) * 0xc0, (V))
+
+#endif /* _ASM_MB93493_REGS_H */
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
new file mode 100644
index 000000000000..a025dd4514e7
--- /dev/null
+++ b/include/asm-frv/mem-layout.h
@@ -0,0 +1,78 @@
+/* mem-layout.h: memory layout
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MEM_LAYOUT_H
+#define _ASM_MEM_LAYOUT_H
+
+#ifndef __ASSEMBLY__
+#define __UL(X)	((unsigned long) (X))
+#else
+#define __UL(X)	(X)
+#endif
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#define PAGE_SHIFT			14
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE			(1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE			(1 << PAGE_SHIFT)
+#endif
+
+#define PAGE_MASK			(~(PAGE_SIZE-1))
+
+/*****************************************************************************/
+/*
+ * virtual memory layout from kernel's point of view
+ */
+#define PAGE_OFFSET			((unsigned long) &__page_offset)
+
+#ifdef CONFIG_MMU
+
+/* see Documentation/fujitsu/frv/mmu-layout.txt */
+#define KERNEL_LOWMEM_START		__UL(0xc0000000)
+#define KERNEL_LOWMEM_END		__UL(0xd0000000)
+#define VMALLOC_START			__UL(0xd0000000)
+#define VMALLOC_END			__UL(0xd8000000)
+#define PKMAP_BASE			__UL(0xd8000000)
+#define PKMAP_END			__UL(0xdc000000)
+#define KMAP_ATOMIC_SECONDARY_FRAME	__UL(0xdc000000)
+#define KMAP_ATOMIC_PRIMARY_FRAME	__UL(0xdd000000)
+
+#endif
+
+#define KERNEL_IO_START			__UL(0xe0000000)
+
+
+/*****************************************************************************/
+/*
+ * memory layout from userspace's point of view
+ */
+#define BRK_BASE			__UL(2 * 1024 * 1024 + PAGE_SIZE)
+#define STACK_TOP			__UL(2 * 1024 * 1024)
+
+/* userspace process size */
+#ifdef CONFIG_MMU
+#define TASK_SIZE			(PAGE_OFFSET)
+#else
+#define TASK_SIZE			__UL(0xFFFFFFFFUL)
+#endif
+
+/* base of area at which unspecified mmaps will start */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define TASK_UNMAPPED_BASE		__UL(16 * 1024 * 1024)
+#else
+#define TASK_UNMAPPED_BASE		__UL(TASK_SIZE / 3)
+#endif
+
+#endif /* _ASM_MEM_LAYOUT_H */
diff --git a/include/asm-frv/mman.h b/include/asm-frv/mman.h
new file mode 100644
index 000000000000..c684720dfbdd
--- /dev/null
+++ b/include/asm-frv/mman.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __ASM_MMAN_H__ */
+
diff --git a/include/asm-frv/mmu.h b/include/asm-frv/mmu.h
new file mode 100644
index 000000000000..22c03714fb14
--- /dev/null
+++ b/include/asm-frv/mmu.h
@@ -0,0 +1,42 @@
+/* mmu.h: memory management context for FR-V with or without MMU support
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+typedef struct {
+#ifdef CONFIG_MMU
+	struct list_head id_link;		/* link in list of context ID owners */
+	unsigned short	id;			/* MMU context ID */
+	unsigned short	id_busy;		/* true if ID is in CXNR */
+	unsigned long	itlb_cached_pge;	/* [SCR0] PGE cached for insn TLB handler */
+	unsigned long	itlb_ptd_mapping;	/* [DAMR4] PTD mapping for itlb cached PGE */
+	unsigned long	dtlb_cached_pge;	/* [SCR1] PGE cached for data TLB handler */
+	unsigned long	dtlb_ptd_mapping;	/* [DAMR5] PTD mapping for dtlb cached PGE */
+
+#else
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+
+#endif
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long	exec_fdpic_loadmap;
+	unsigned long	interp_fdpic_loadmap;
+#endif
+
+} mm_context_t;
+
+#ifdef CONFIG_MMU
+extern int __nongpreldata cxn_pinned;
+extern int cxn_pin_by_pid(pid_t pid);
+#endif
+
+#endif /* _ASM_MMU_H */
diff --git a/include/asm-frv/mmu_context.h b/include/asm-frv/mmu_context.h
new file mode 100644
index 000000000000..4fb9ea3c5bc9
--- /dev/null
+++ b/include/asm-frv/mmu_context.h
@@ -0,0 +1,50 @@
+/* mmu_context.h: MMU context management routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_MMU
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd);
+extern void destroy_context(struct mm_struct *mm);
+
+#else
+#define init_new_context(tsk, mm)		({ 0; })
+#define change_mm_context(old, ctx, _pml4)	do {} while(0)
+#define destroy_context(mm)			do {} while(0)
+#endif
+
+#define switch_mm(prev, next, tsk)						\
+do {										\
+	if (prev != next)							\
+		change_mm_context(&prev->context, &next->context, next->pgd);	\
+} while(0)
+
+#define activate_mm(prev, next)						\
+do {									\
+	change_mm_context(&prev->context, &next->context, next->pgd);	\
+} while(0)
+
+#define deactivate_mm(tsk, mm)			\
+do {						\
+} while(0)
+
+#endif
diff --git a/include/asm-frv/module.h b/include/asm-frv/module.h
new file mode 100644
index 000000000000..3223cfaef743
--- /dev/null
+++ b/include/asm-frv/module.h
@@ -0,0 +1,20 @@
+/* module.h: FRV module stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#define module_map(x)		vmalloc(x)
+#define module_unmap(x)		vfree(x)
+#define module_arch_init(x)	(0)
+#define arch_init_modules(x)	do { } while (0)
+
+#endif /* _ASM_MODULE_H */
+
diff --git a/include/asm-frv/msgbuf.h b/include/asm-frv/msgbuf.h
new file mode 100644
index 000000000000..97ceb55a06fb
--- /dev/null
+++ b/include/asm-frv/msgbuf.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm	msg_perm;
+	__kernel_time_t		msg_stime;	/* last msgsnd time */
+	unsigned long		__unused1;
+	__kernel_time_t		msg_rtime;	/* last msgrcv time */
+	unsigned long		__unused2;
+	__kernel_time_t		msg_ctime;	/* last change time */
+	unsigned long		__unused3;
+	unsigned long		msg_cbytes;	/* current number of bytes on queue */
+	unsigned long		msg_qnum;	/* number of messages in queue */
+	unsigned long		msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t		msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t		msg_lrpid;	/* last receive pid */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
+
diff --git a/include/asm-frv/namei.h b/include/asm-frv/namei.h
new file mode 100644
index 000000000000..84ddd6445f23
--- /dev/null
+++ b/include/asm-frv/namei.h
@@ -0,0 +1,18 @@
+/*
+ * asm/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ASM_NAMEI_H
+#define __ASM_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif
+
diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h
new file mode 100644
index 000000000000..f7914f1782b0
--- /dev/null
+++ b/include/asm-frv/page.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/virtconvert.h>
+#include <asm/mem-layout.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)		free_page(addr)
+
+#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to,from)			memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg)	memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long	pte;	} pte_t;
+typedef struct { unsigned long	ste[64];} pmd_t;
+typedef struct { pmd_t		pue[1]; } pud_t;
+typedef struct { pud_t		pge[1];	} pgd_t;
+typedef struct { unsigned long	pgprot;	} pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).ste[0])
+#define pud_val(x)	((x).pue[0])
+#define pgd_val(x)	((x).pge[0])
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pud(x)	((pud_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define PTE_MASK	PAGE_MASK
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute_const__;
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (PAGE_SHIFT - 1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#define devmem_is_allowed(pfn)	1
+
+#define __pa(vaddr)		virt_to_phys((void *) vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long) paddr)
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#ifdef CONFIG_MMU
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long) ((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+
+#else
+#define pfn_to_page(pfn)	(&mem_map[(pfn) - (PAGE_OFFSET >> PAGE_SHIFT)])
+#define page_to_pfn(page)	((PAGE_OFFSET >> PAGE_SHIFT) + (unsigned long) ((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+
+#ifdef CONFIG_MMU
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
+#define WANT_PAGE_VIRTUAL	1
+#endif
+
+#endif /* _ASM_PAGE_H */
diff --git a/include/asm-frv/param.h b/include/asm-frv/param.h
new file mode 100644
index 000000000000..168381ebb41a
--- /dev/null
+++ b/include/asm-frv/param.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		1000		/* Internal kernel timer frequency */
+#define USER_HZ		100		/* .. some user interfaces are in "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	16384
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN		64	/* max length of hostname */
+#define COMMAND_LINE_SIZE	512
+
+#endif /* _ASM_PARAM_H */
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
new file mode 100644
index 000000000000..a6a469231f62
--- /dev/null
+++ b/include/asm-frv/pci.h
@@ -0,0 +1,108 @@
+/* pci.h: FR-V specific PCI declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68k/pci.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef ASM_PCI_H
+#define	ASM_PCI_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+
+struct pci_dev;
+
+#define pcibios_assign_all_busses()	0
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern void pcibios_penalize_isa_irq(int irq);
+
+#ifdef CONFIG_MMU
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+extern void consistent_free(void *vaddr);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+extern void consistent_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+#endif
+
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+				  dma_addr_t *dma_handle);
+
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)	(1)
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_controller_num(PDEV)	(0)
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+/*
+ *	These are pretty much arbitary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, the
+ * device again owns the buffer.
+ */
+static inline void pci_dma_sync_single(struct pci_dev *hwdev,
+				       dma_addr_t dma_handle,
+				       size_t size, int direction)
+{
+	if (direction == PCI_DMA_NONE)
+                BUG();
+
+	frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
+			    (unsigned long)bus_to_virt(dma_handle) + size);
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
+				   struct scatterlist *sg,
+				   int nelems, int direction)
+{
+	int i;
+
+	if (direction == PCI_DMA_NONE)
+                BUG();
+
+	for (i = 0; i < nelems; i++)
+		frv_cache_wback_inv(sg_dma_address(&sg[i]),
+				    sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
+}
+
+
+#endif
diff --git a/include/asm-frv/percpu.h b/include/asm-frv/percpu.h
new file mode 100644
index 000000000000..2cad3f874ded
--- /dev/null
+++ b/include/asm-frv/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif	/* __ASM_PERCPU_H */
diff --git a/include/asm-frv/pgalloc.h b/include/asm-frv/pgalloc.h
new file mode 100644
index 000000000000..1bd28f41bfa8
--- /dev/null
+++ b/include/asm-frv/pgalloc.h
@@ -0,0 +1,64 @@
+/* pgalloc.h: Page allocation routines for FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *	include/asm-m68knommu/pgalloc.h
+ *	include/asm-i386/pgalloc.h
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+#ifdef CONFIG_MMU
+
+#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE)
+#define pmd_populate(MM, PMD, PAGE)						\
+do {										\
+	__set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE);	\
+} while(0)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte)		tlb_remove_page((tlb),(pte))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
new file mode 100644
index 000000000000..cc1373c4b790
--- /dev/null
+++ b/include/asm-frv/pgtable.h
@@ -0,0 +1,555 @@
+/* pgtable.h: FR-V page table mangling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *	include/asm-m68knommu/pgtable.h
+ *	include/asm-i386/pgtable.h
+ */
+
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <linux/config.h>
+#include <asm/mem-layout.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_HIGHPTE)
+typedef unsigned long pte_addr_t;
+#else
+typedef pte_t *pte_addr_t;
+#endif
+#endif
+
+/*****************************************************************************/
+/*
+ * MMU-less operation case first
+ */
+#ifndef CONFIG_MMU
+
+#define pgd_present(pgd)	(1)		/* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *) 0)
+
+#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif
+
+#define ZERO_PAGE(vaddr)	({ BUG(); NULL; })
+
+#define swapper_pg_dir		((pgd_t *) NULL)
+
+#define pgtable_cache_init()	do {} while(0)
+
+#else /* !CONFIG_MMU */
+/*****************************************************************************/
+/*
+ * then MMU operation
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long empty_zero_page;
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+#endif
+
+/*
+ * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
+ * [see Documentation/fujitsu/frv/mmu-layout.txt]
+ *
+ * Page Directory:
+ *  - Size: 16KB
+ *  - 64 PGEs per PGD
+ *  - Each PGE holds 1 PUD and covers 64MB
+ *
+ * Page Upper Directory:
+ *  - Size: 256B
+ *  - 1 PUE per PUD
+ *  - Each PUE holds 1 PMD and covers 64MB
+ *
+ * Page Mid-Level Directory
+ *  - Size: 256B
+ *  - 1 PME per PMD
+ *  - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table
+ *  - All STEs are instantiated at the same time
+ *
+ * Page Table
+ *  - Size: 16KB
+ *  - 4096 PTEs per PT
+ *  - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries
+ *
+ * Pages
+ *  - Size: 4KB
+ *
+ * total PTEs
+ *	= 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs
+ *	= 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT
+ *	= 262144 (or 256 * 1024)
+ */
+#define PGDIR_SHIFT		26
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		64
+
+#define PUD_SHIFT		26
+#define PTRS_PER_PUD		1
+#define PUD_SIZE		(1UL << PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PUE_SIZE		256
+
+#define PMD_SHIFT		26
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		1
+#define PME_SIZE		256
+
+#define __frv_PT_SIZE		256
+
+#define PTRS_PER_PTE		4096
+
+#define USER_PGDS_IN_LAST_PML4	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS		(PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT	26
+#define BOOT_USER_PGD_PTRS	(__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS	(PTRS_PER_PGD - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte)
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e)))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e))))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)				\
+do {							\
+	*(pteptr) = (pteval);				\
+	asm volatile("dcf %M0" :: "U"(*pteptr));	\
+} while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define set_pte_atomic(pteptr, pteval)		set_pte((pteptr), (pteval))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t *pgd)	{ }
+
+#define pgd_populate(mm, pgd, pud)		do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval)				\
+do {							\
+	memcpy((pgdptr), &(pgdval), sizeof(pgd_t));	\
+	asm volatile("dcf %M0" :: "U"(*(pgdptr)));	\
+} while(0)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	return (pud_t *) pgd;
+}
+
+#define pgd_page(pgd)				(pud_page((pud_t){ pgd }))
+#define pgd_page_kernel(pgd)			(pud_page_kernel((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address)		NULL
+#define pud_free(x)				do { } while (0)
+#define __pud_free_tlb(tlb, x)			do { } while (0)
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud)		{ return 0; }
+static inline int pud_bad(pud_t pud)		{ return 0; }
+static inline int pud_present(pud_t pud)	{ return 1; }
+static inline void pud_clear(pud_t *pud)	{ }
+
+#define pud_populate(mm, pmd, pte)		do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval)			set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+#define pud_page(pud)				(pmd_page((pmd_t){ pud }))
+#define pud_page_kernel(pud)			(pmd_page_kernel((pmd_t){ pud }))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd);
+
+#define set_pmd(pmdptr, pmdval)			\
+do {						\
+	__set_pmd((pmdptr), (pmdval).ste[0]);	\
+} while(0)
+
+#define __pmd_index(address)			0
+
+static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir + __pmd_index(address);
+}
+
+#define pte_same(a, b)		((a).pte == (b).pte)
+#define pte_page(x)		(mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT))))
+#define pte_none(x)		(!(x).pte)
+#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define VMALLOC_VMADDR(x)	((unsigned long) (x))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * control flags in AMPR registers and TLB entries
+ */
+#define _PAGE_BIT_PRESENT	xAMPRx_V_BIT
+#define _PAGE_BIT_WP		DAMPRx_WP_BIT
+#define _PAGE_BIT_NOCACHE	xAMPRx_C_BIT
+#define _PAGE_BIT_SUPER		xAMPRx_S_BIT
+#define _PAGE_BIT_ACCESSED	xAMPRx_RESERVED8_BIT
+#define _PAGE_BIT_DIRTY		xAMPRx_M_BIT
+#define _PAGE_BIT_NOTGLOBAL	xAMPRx_NG_BIT
+
+#define _PAGE_PRESENT		xAMPRx_V
+#define _PAGE_WP		DAMPRx_WP
+#define _PAGE_NOCACHE		xAMPRx_C
+#define _PAGE_SUPER		xAMPRx_S
+#define _PAGE_ACCESSED		xAMPRx_RESERVED8	/* accessed if set */
+#define _PAGE_DIRTY		xAMPRx_M
+#define _PAGE_NOTGLOBAL		xAMPRx_NG
+
+#define _PAGE_RESERVED_MASK	(xAMPRx_RESERVED8 | xAMPRx_RESERVED13)
+
+#define _PAGE_FILE		0x002	/* set:pagecache unset:swap */
+#define _PAGE_PROTNONE		0x000	/* If not present */
+
+#define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PGPROT_BASE \
+	(_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(__PGPROT_BASE)
+#define PAGE_COPY	__pgprot(__PGPROT_BASE | _PAGE_WP)
+#define PAGE_READONLY	__pgprot(__PGPROT_BASE | _PAGE_WP)
+
+#define __PAGE_KERNEL		(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY)
+#define __PAGE_KERNEL_NOCACHE	(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE)
+#define __PAGE_KERNEL_RO	(__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP)
+
+#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL)
+
+#define PAGE_KERNEL		MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO		MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE	MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#define _PAGE_TABLE		(_PAGE_PRESENT | xAMPRx_SS_16Kb)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The FR451 can do execute protection by virtue of having separate TLB miss handlers for
+ * instruction access and for data access. However, we don't have enough reserved bits to say
+ * "execute only", so we don't bother. If you can read it, you can execute it and vice versa.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define	pmd_bad(x)	(pmd_val(x) & xAMPRx_SS)
+#define pmd_clear(xp)	do { __set_pmd(xp, 0); } while(0)
+
+#define pmd_page_kernel(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#endif
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)		{ return !((pte).pte & _PAGE_SUPER); }
+static inline int pte_exec(pte_t pte)		{ return !((pte).pte & _PAGE_SUPER); }
+static inline int pte_dirty(pte_t pte)		{ return (pte).pte & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return (pte).pte & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)		{ return !((pte).pte & _PAGE_WP); }
+
+static inline pte_t pte_rdprotect(pte_t pte)	{ (pte).pte |= _PAGE_SUPER; return pte; }
+static inline pte_t pte_exprotect(pte_t pte)	{ (pte).pte |= _PAGE_SUPER; return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ (pte).pte &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ (pte).pte &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ (pte).pte |= _PAGE_WP; return pte; }
+static inline pte_t pte_mkread(pte_t pte)	{ (pte).pte &= ~_PAGE_SUPER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ (pte).pte &= ~_PAGE_SUPER; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ (pte).pte |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ (pte).pte |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ (pte).pte &= ~_PAGE_WP; return pte; }
+
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	int i = test_and_clear_bit(_PAGE_BIT_DIRTY, ptep);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+	return i;
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+	return i;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long x = xchg(&ptep->pte, 0);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+	return __pte(x);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	set_bit(_PAGE_BIT_WP, ptep);
+	asm volatile("dcf %M0" :: "U"(*ptep));
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry)	((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot)	pfn_pte((physpage) >> PAGE_SHIFT, pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte &= _PAGE_CHG_MASK;
+	pte.pte |= pgprot_val(newprot);
+	return pte;
+}
+
+#define page_pte(page)	page_pte_prot((page), __pgprot(0))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_index_k(addr) pgd_index(addr)
+
+/* Find an entry in the bottom-level page table.. */
+#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+		(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address) \
+	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
+#define pte_offset_map_nested(dir, address) \
+	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
+#else
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/*
+ * Handle swap and file entries
+ * - the PTE is encoded in the following format:
+ *	bit 0:		Must be 0 (!_PAGE_PRESENT)
+ *	bit 1:		Type: 0 for swap, 1 for file (_PAGE_FILE)
+ *	bits 2-7:	Swap type
+ *	bits 8-31:	Swap offset
+ *	bits 2-31:	File pgoff
+ */
+#define __swp_type(x)			(((x).val >> 2) & 0x1f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+	return pte.pte & _PAGE_FILE;
+}
+
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(PTE)	((PTE).pte >> 2)
+#define pgoff_to_pte(off)	__pte((off) << 2 | _PAGE_FILE)
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define PageSkip(page)		(0)
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+/*
+ * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long ampr;
+	pgd_t *pge = pgd_offset(current->mm, address);
+	pud_t *pue = pud_offset(pge, address);
+	pmd_t *pme = pmd_offset(pue, address);
+
+	ampr = pme->ste[0] & 0xffffff00;
+	ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V;
+
+	asm volatile("movgs %0,scr0\n"
+		     "movgs %0,scr1\n"
+		     "movgs %1,dampr4\n"
+		     "movgs %1,dampr5\n"
+		     :
+		     : "r"(address), "r"(ampr)
+		     );
+}
+
+#ifdef CONFIG_PROC_FS
+extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer);
+#endif
+
+extern void __init pgtable_cache_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_MMU */
+
+#ifndef __ASSEMBLY__
+extern void __init paging_init(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/include/asm-frv/poll.h b/include/asm-frv/poll.h
new file mode 100644
index 000000000000..8cbcd60e334f
--- /dev/null
+++ b/include/asm-frv/poll.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_POLL_H
+#define _ASM_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		0x0400
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
+
diff --git a/include/asm-frv/posix_types.h b/include/asm-frv/posix_types.h
new file mode 100644
index 000000000000..73c2ba8d76b4
--- /dev/null
+++ b/include/asm-frv/posix_types.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	(!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
+
diff --git a/include/asm-frv/processor.h b/include/asm-frv/processor.h
new file mode 100644
index 000000000000..5228c18b7f78
--- /dev/null
+++ b/include/asm-frv/processor.h
@@ -0,0 +1,153 @@
+/* processor.h: FRV processor definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <linux/config.h>
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/linkage.h>
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/registers.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/cache.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+struct cpuinfo_frv {
+#ifdef CONFIG_MMU
+	unsigned long	*pgd_quick;
+	unsigned long	*pte_quick;
+	unsigned long	pgtable_cache_sz;
+#endif
+} __cacheline_aligned;
+
+extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+#define cpu_data		(&boot_cpu_data)
+#define current_cpu_data	boot_cpu_data
+
+/*
+ * Bus types
+ */
+#define EISA_bus 0
+#define MCA_bus 0
+
+struct thread_struct {
+	struct pt_regs		*frame;		/* [GR28] exception frame ptr for this thread */
+	struct task_struct	*curr;		/* [GR29] current pointer for this thread */
+	unsigned long		sp;		/* [GR1 ] kernel stack pointer */
+	unsigned long		fp;		/* [GR2 ] kernel frame pointer */
+	unsigned long		lr;		/* link register */
+	unsigned long		pc;		/* program counter */
+	unsigned long		gr[12];		/* [GR16-GR27] */
+	unsigned long		sched_lr;	/* LR from schedule() */
+
+	union {
+		struct pt_regs		*frame0;	/* top (user) stack frame */
+		struct user_context	*user;		/* userspace context */
+	};
+} __attribute__((aligned(8)));
+
+extern struct pt_regs *__kernel_frame0_ptr;
+extern struct task_struct *__kernel_current_task;
+
+#endif
+
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_FRAME0 \
+	((struct pt_regs *) \
+	(sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context)))
+
+#define INIT_THREAD {				\
+	NULL,					\
+	(struct task_struct *) init_stack,	\
+	0, 0, 0, 0,				\
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },	\
+	0,					\
+	{ INIT_THREAD_FRAME0 },			\
+}
+
+/*
+ * do necessary setup to start up a newly executed thread.
+ * - need to discard the frame stacked by init() invoking the execve syscall
+ */
+#define start_thread(_regs, _pc, _usp)			\
+do {							\
+	set_fs(USER_DS); /* reads from user space */	\
+	__frame = __kernel_frame0_ptr;			\
+	__frame->pc	= (_pc);			\
+	__frame->psr	&= ~PSR_S;			\
+	__frame->sp	= (_usp);			\
+} while(0)
+
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern asmlinkage void save_user_regs(struct user_context *target);
+extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
+
+#define copy_segments(tsk, mm)		do { } while (0)
+#define release_segments(mm)		do { } while (0)
+#define forget_segments()		do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
+#define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
+
+/* Allocation and freeing of basic task resources. */
+extern struct task_struct *alloc_task_struct(void);
+extern void free_task_struct(struct task_struct *p);
+
+#define cpu_relax()    do { } while (0)
+
+/* data cache prefetch */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x)
+{
+	asm volatile("dcpl %0,gr0,#0" : : "r"(x));
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_PROCESSOR_H */
diff --git a/include/asm-frv/ptrace.h b/include/asm-frv/ptrace.h
new file mode 100644
index 000000000000..b2cce0718e57
--- /dev/null
+++ b/include/asm-frv/ptrace.h
@@ -0,0 +1,86 @@
+/* ptrace.h: ptrace() relevant definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+
+#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
+
+
+#define PT_PSR		0
+#define	PT_ISR		1
+#define PT_CCR		2
+#define PT_CCCR		3
+#define PT_LR		4
+#define PT_LCR		5
+#define PT_PC		6
+
+#define PT__STATUS	7	/* exception status */
+#define PT_SYSCALLNO	8	/* syscall number or -1 */
+#define PT_ORIG_GR8	9	/* saved GR8 for signal handling */
+#define PT_GNER0	10
+#define PT_GNER1	11
+#define PT_IACC0H	12
+#define PT_IACC0L	13
+
+#define PT_GR(j)	( 14 + (j))	/* GRj for 0<=j<=63 */
+#define PT_FR(j)	( 78 + (j))	/* FRj for 0<=j<=63 */
+#define PT_FNER(j)	(142 + (j))	/* FNERj for 0<=j<=1 */
+#define PT_MSR(j)	(144 + (j))	/* MSRj for 0<=j<=2 */
+#define PT_ACC(j)	(146 + (j))	/* ACCj for 0<=j<=7 */
+#define PT_ACCG(jklm)	(154 + (jklm))	/* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
+#define PT_FSR(j)	(156 + (j))	/* FSRj for 0<=j<=0 */
+#define PT__GPEND	78
+#define PT__END		157
+
+#define PT_TBR		PT_GR(0)
+#define PT_SP		PT_GR(1)
+#define PT_FP		PT_GR(2)
+#define PT_PREV_FRAME	PT_GR(28)	/* previous exception frame pointer (old gr28 value) */
+#define PT_CURR_TASK	PT_GR(29)	/* current task */
+
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * dedicate GR28; to keeping the a pointer to the current exception frame
+ */
+register struct pt_regs *__frame asm("gr28");
+register struct pt_regs *__debug_frame asm("gr31");
+
+#ifndef container_of
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
+#define __debug_regs container_of(__debug_frame, struct pt_debug_regs, normal_regs)
+
+#define user_mode(regs)			(!((regs)->psr & PSR_S))
+#define instruction_pointer(regs)	((regs)->pc)
+
+extern unsigned long user_stack(const struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#define profile_pc(regs) ((regs)->pc)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_PTRACE_H */
diff --git a/include/asm-frv/registers.h b/include/asm-frv/registers.h
new file mode 100644
index 000000000000..fccfd95cff68
--- /dev/null
+++ b/include/asm-frv/registers.h
@@ -0,0 +1,255 @@
+/* registers.h: register frame declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * notes:
+ *
+ * (1) that the members of all these structures are carefully aligned to permit
+ *     usage of STD/STDF instructions
+ *
+ * (2) if you change these structures, you must change the code in
+ *     arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c}
+ *
+ *
+ * the kernel stack space block looks like this:
+ *
+ *	+0x2000	+----------------------
+ *		| union {
+ *		|	struct user_context
+ *		|	struct pt_regs [user exception]
+ *		| }
+ *		+---------------------- <-- __kernel_frame0_ptr (maybe GR28)
+ *		|
+ *		| kernel stack
+ *		|
+ *		|......................
+ *		| struct pt_regs [kernel exception]
+ *		|...................... <-- __kernel_frame0_ptr (maybe GR28)
+ *		|
+ *		| kernel stack
+ *		|
+ *		|...................... <-- stack pointer (GR1)
+ *		|
+ *		| unused stack space
+ *		|
+ *		+----------------------
+ *		| struct thread_info
+ *	+0x0000	+---------------------- <-- __current_thread_info (GR15);
+ *
+ * note that GR28 points to the current exception frame
+ */
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#ifndef __ASSEMBLY__
+#define __OFFSET(X)	(X)
+#define __OFFSETC(X,N)	xxxxxxxxxxxxxxxxxxxxxxxx
+#else
+#define __OFFSET(X)	((X)*4)
+#define __OFFSETC(X,N)	((X)*4+(N))
+#endif
+
+/*****************************************************************************/
+/*
+ * Exception/Interrupt frame
+ * - held on kernel stack
+ * - 8-byte aligned on stack (old SP is saved in frame)
+ * - GR0 is fixed 0, so we don't save it
+ */
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long		psr;		/* Processor Status Register */
+	unsigned long		isr;		/* Integer Status Register */
+	unsigned long		ccr;		/* Condition Code Register */
+	unsigned long		cccr;		/* Condition Code for Conditional Insns Register */
+	unsigned long		lr;		/* Link Register */
+	unsigned long		lcr;		/* Loop Count Register */
+	unsigned long		pc;		/* Program Counter Register */
+	unsigned long		__status;	/* exception status */
+	unsigned long		syscallno;	/* syscall number or -1 */
+	unsigned long		orig_gr8;	/* original syscall arg #1 */
+	unsigned long		gner0;
+	unsigned long		gner1;
+	unsigned long long	iacc0;
+	unsigned long		tbr;		/* GR0 is fixed zero, so we use this for TBR */
+	unsigned long		sp;		/* GR1: USP/KSP */
+	unsigned long		fp;		/* GR2: FP */
+	unsigned long		gr3;
+	unsigned long		gr4;
+	unsigned long		gr5;
+	unsigned long		gr6;
+	unsigned long		gr7;		/* syscall number */
+	unsigned long		gr8;		/* 1st syscall param; syscall return */
+	unsigned long		gr9;		/* 2nd syscall param */
+	unsigned long		gr10;		/* 3rd syscall param */
+	unsigned long		gr11;		/* 4th syscall param */
+	unsigned long		gr12;		/* 5th syscall param */
+	unsigned long		gr13;		/* 6th syscall param */
+	unsigned long		gr14;
+	unsigned long		gr15;
+	unsigned long		gr16;		/* GP pointer */
+	unsigned long		gr17;		/* small data */
+	unsigned long		gr18;		/* PIC/PID */
+	unsigned long		gr19;
+	unsigned long		gr20;
+	unsigned long		gr21;
+	unsigned long		gr22;
+	unsigned long		gr23;
+	unsigned long		gr24;
+	unsigned long		gr25;
+	unsigned long		gr26;
+	unsigned long		gr27;
+	struct pt_regs		*next_frame;	/* GR28 - next exception frame */
+	unsigned long		gr29;		/* GR29 - OS reserved */
+	unsigned long		gr30;		/* GR30 - OS reserved */
+	unsigned long		gr31;		/* GR31 - OS reserved */
+} __attribute__((aligned(8)));
+
+#endif
+
+#define REG_PSR		__OFFSET( 0)	/* Processor Status Register */
+#define REG_ISR		__OFFSET( 1)	/* Integer Status Register */
+#define REG_CCR		__OFFSET( 2)	/* Condition Code Register */
+#define REG_CCCR	__OFFSET( 3)	/* Condition Code for Conditional Insns Register */
+#define REG_LR		__OFFSET( 4)	/* Link Register */
+#define REG_LCR		__OFFSET( 5)	/* Loop Count Register */
+#define REG_PC		__OFFSET( 6)	/* Program Counter */
+
+#define REG__STATUS	__OFFSET( 7)	/* exception status */
+#define REG__STATUS_STEP	0x00000001	/* - reenable single stepping on return */
+#define REG__STATUS_STEPPED	0x00000002	/* - single step caused exception */
+#define REG__STATUS_BROKE	0x00000004	/* - BREAK insn caused exception */
+#define REG__STATUS_SYSC_ENTRY	0x40000000	/* - T on syscall entry (ptrace.c only) */
+#define REG__STATUS_SYSC_EXIT	0x80000000	/* - T on syscall exit (ptrace.c only) */
+
+#define REG_SYSCALLNO	__OFFSET( 8)	/* syscall number or -1 */
+#define REG_ORIG_GR8	__OFFSET( 9)	/* saved GR8 for signal handling */
+#define REG_GNER0	__OFFSET(10)
+#define REG_GNER1	__OFFSET(11)
+#define REG_IACC0	__OFFSET(12)
+
+#define REG_TBR		__OFFSET(14)	/* Trap Vector Register */
+#define REG_GR(R)	__OFFSET((14+(R)))
+#define REG__END	REG_GR(32)
+
+#define REG_SP		REG_GR(1)
+#define REG_FP		REG_GR(2)
+#define REG_PREV_FRAME	REG_GR(28)	/* previous exception frame pointer (old gr28 value) */
+#define REG_CURR_TASK	REG_GR(29)	/* current task */
+
+/*****************************************************************************/
+/*
+ * extension tacked in front of the exception frame in debug mode
+ */
+#ifndef __ASSEMBLY__
+
+struct pt_debug_regs
+{
+	unsigned long		bpsr;
+	unsigned long		dcr;
+	unsigned long		brr;
+	unsigned long		nmar;
+	struct pt_regs		normal_regs;
+} __attribute__((aligned(8)));
+
+#endif
+
+#define REG_NMAR		__OFFSET(-1)
+#define REG_BRR			__OFFSET(-2)
+#define REG_DCR			__OFFSET(-3)
+#define REG_BPSR		__OFFSET(-4)
+#define REG__DEBUG_XTRA		__OFFSET(4)
+
+/*****************************************************************************/
+/*
+ * userspace registers
+ */
+#ifndef __ASSEMBLY__
+
+struct user_int_regs
+{
+	/* integer registers
+	 * - up to gr[31] mirror pt_regs
+	 * - total size must be multiple of 8 bytes
+	 */
+	unsigned long		psr;		/* Processor Status Register */
+	unsigned long		isr;		/* Integer Status Register */
+	unsigned long		ccr;		/* Condition Code Register */
+	unsigned long		cccr;		/* Condition Code for Conditional Insns Register */
+	unsigned long		lr;		/* Link Register */
+	unsigned long		lcr;		/* Loop Count Register */
+	unsigned long		pc;		/* Program Counter Register */
+	unsigned long		__status;	/* exception status */
+	unsigned long		syscallno;	/* syscall number or -1 */
+	unsigned long		orig_gr8;	/* original syscall arg #1 */
+	unsigned long		gner[2];
+	unsigned long long	iacc[1];
+
+	union {
+		unsigned long	tbr;
+		unsigned long	gr[64];
+	};
+};
+
+struct user_fpmedia_regs
+{
+	/* FP/Media registers */
+	unsigned long	fr[64];
+	unsigned long	fner[2];
+	unsigned long	msr[2];
+	unsigned long	acc[8];
+	unsigned char	accg[8];
+	unsigned long	fsr[1];
+};
+
+struct user_context
+{
+	struct user_int_regs		i;
+	struct user_fpmedia_regs	f;
+
+	/* we provide a context extension so that we can save the regs for CPUs that
+	 * implement many more of Fujitsu's lavish register spec
+	 */
+	void *extension;
+} __attribute__((aligned(8)));
+
+#endif
+
+#define NR_USER_INT_REGS	(14 + 64)
+#define NR_USER_FPMEDIA_REGS	(64 + 2 + 2 + 8 + 8/4 + 1)
+#define NR_USER_CONTEXT		(NR_USER_INT_REGS + NR_USER_FPMEDIA_REGS + 1)
+
+#define USER_CONTEXT_SIZE	(((NR_USER_CONTEXT + 1) & ~1) * 4)
+
+#define __THREAD_FRAME		__OFFSET(0)
+#define __THREAD_CURR		__OFFSET(1)
+#define __THREAD_SP		__OFFSET(2)
+#define __THREAD_FP		__OFFSET(3)
+#define __THREAD_LR		__OFFSET(4)
+#define __THREAD_PC		__OFFSET(5)
+#define __THREAD_GR(R)		__OFFSET(6 + (R) - 16)
+#define __THREAD_FRAME0		__OFFSET(19)
+#define __THREAD_USER		__OFFSET(19)
+
+#define __USER_INT		__OFFSET(0)
+#define __INT_GR(R)		__OFFSET(14 + (R))
+
+#define __USER_FPMEDIA		__OFFSET(NR_USER_INT_REGS)
+#define __FPMEDIA_FR(R)		__OFFSET(NR_USER_INT_REGS + (R))
+#define __FPMEDIA_FNER(R)	__OFFSET(NR_USER_INT_REGS + 64 + (R))
+#define __FPMEDIA_MSR(R)	__OFFSET(NR_USER_INT_REGS + 66 + (R))
+#define __FPMEDIA_ACC(R)	__OFFSET(NR_USER_INT_REGS + 68 + (R))
+#define __FPMEDIA_ACCG(R)	__OFFSETC(NR_USER_INT_REGS + 76, (R))
+#define __FPMEDIA_FSR(R)	__OFFSET(NR_USER_INT_REGS + 78 + (R))
+
+#endif /* _ASM_REGISTERS_H */
diff --git a/include/asm-frv/resource.h b/include/asm-frv/resource.h
new file mode 100644
index 000000000000..5fc60548fd02
--- /dev/null
+++ b/include/asm-frv/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
+
diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h
new file mode 100644
index 000000000000..fb38fd329a5f
--- /dev/null
+++ b/include/asm-frv/scatterlist.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+/*
+ * Drivers must set either ->address or (preferred) ->page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using ->page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to ->page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg->page = virt_to_page(some_ptr);
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+	struct page	*page;		/* Location for highmem page, if any */
+	unsigned int	offset;		/* for highmem, page offset */
+
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+
+#endif /* !_ASM_SCATTERLIST_H */
diff --git a/include/asm-frv/sections.h b/include/asm-frv/sections.h
new file mode 100644
index 000000000000..17d0fb171bba
--- /dev/null
+++ b/include/asm-frv/sections.h
@@ -0,0 +1,46 @@
+/* sections.h: linkage layout variables
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm-generic/sections.h>
+
+#ifdef __KERNEL__
+
+/*
+ * we don't want to put variables in the GP-REL section if they're not used very much - that would
+ * be waste since GP-REL addressing is limited to GP16+/-2048
+ */
+#define __nongpreldata	__attribute__((section(".data")))
+#define __nongprelbss	__attribute__((section(".bss")))
+
+/*
+ * linker symbols
+ */
+extern const void __kernel_image_start, __kernel_image_end, __page_offset;
+
+extern unsigned long __nongprelbss memory_start;
+extern unsigned long __nongprelbss memory_end;
+extern unsigned long __nongprelbss rom_length;
+
+/* determine if we're running from ROM */
+static inline int is_in_rom(unsigned long addr)
+{
+	return 0; /* default case: not in ROM */
+}
+
+#endif
+#endif
+#endif /* _ASM_SECTIONS_H */
diff --git a/include/asm-frv/segment.h b/include/asm-frv/segment.h
new file mode 100644
index 000000000000..61222f00dfc1
--- /dev/null
+++ b/include/asm-frv/segment.h
@@ -0,0 +1,46 @@
+/* segment.h: MMU segment settings
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
+
+#ifdef CONFIG_MMU
+#define USER_DS			MAKE_MM_SEG(TASK_SIZE - 1)
+#else
+#define USER_DS			KERNEL_DS
+#endif
+
+#define get_ds()		(KERNEL_DS)
+#define get_fs()		(__current_thread_info->addr_limit)
+#define segment_eq(a,b)		((a).seg == (b).seg)
+#define __kernel_ds_p()		segment_eq(get_fs(), KERNEL_DS)
+#define get_addr_limit()	(get_fs().seg)
+
+#define set_fs(_x)					\
+do {							\
+	__current_thread_info->addr_limit = (_x);	\
+} while(0)
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SEGMENT_H */
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
new file mode 100644
index 000000000000..393545630806
--- /dev/null
+++ b/include/asm-frv/semaphore.h
@@ -0,0 +1,161 @@
+/* semaphore.h: semaphores for the FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_SEMAPHORE_H
+#define _ASM_SEMAPHORE_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#define SEMAPHORE_DEBUG		WAITQUEUE_DEBUG
+
+/*
+ * the semaphore definition
+ * - if counter is >0 then there are tokens available on the semaphore for down to collect
+ * - if counter is <=0 then there are no spare tokens, and anyone that wants one must wait
+ * - if wait_list is not empty, then there are processes waiting for the semaphore
+ */
+struct semaphore {
+	unsigned		counter;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if SEMAPHORE_DEBUG
+	unsigned		__magic;
+#endif
+};
+
+#if SEMAPHORE_DEBUG
+# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
+#else
+# define __SEM_DEBUG_INIT(name)
+#endif
+
+
+#define __SEMAPHORE_INITIALIZER(name,count) \
+{ count, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) __SEM_DEBUG_INIT(name) }
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore *sem, unsigned long flags);
+extern int  __down_interruptible(struct semaphore *sem, unsigned long flags);
+extern void __up(struct semaphore *sem);
+
+static inline void down(struct semaphore *sem)
+{
+	unsigned long flags;
+
+#if SEMAPHORE_DEBUG
+	CHECK_MAGIC(sem->__magic);
+#endif
+
+	spin_lock_irqsave(&sem->wait_lock, flags);
+	if (likely(sem->counter > 0)) {
+		sem->counter--;
+		spin_unlock_irqrestore(&sem->wait_lock, flags);
+	}
+	else {
+		__down(sem, flags);
+	}
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+#if SEMAPHORE_DEBUG
+	CHECK_MAGIC(sem->__magic);
+#endif
+
+	spin_lock_irqsave(&sem->wait_lock, flags);
+	if (likely(sem->counter > 0)) {
+		sem->counter--;
+		spin_unlock_irqrestore(&sem->wait_lock, flags);
+	}
+	else {
+		ret = __down_interruptible(sem, flags);
+	}
+	return ret;
+}
+
+/*
+ * non-blockingly attempt to down() a semaphore.
+ * - returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int success = 0;
+
+#if SEMAPHORE_DEBUG
+	CHECK_MAGIC(sem->__magic);
+#endif
+
+	spin_lock_irqsave(&sem->wait_lock, flags);
+	if (sem->counter > 0) {
+		sem->counter--;
+		success = 1;
+	}
+	spin_unlock_irqrestore(&sem->wait_lock, flags);
+	return !success;
+}
+
+static inline void up(struct semaphore *sem)
+{
+	unsigned long flags;
+
+#if SEMAPHORE_DEBUG
+	CHECK_MAGIC(sem->__magic);
+#endif
+
+	spin_lock_irqsave(&sem->wait_lock, flags);
+	if (!list_empty(&sem->wait_list))
+		__up(sem);
+	else
+		sem->counter++;
+	spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+static inline int sem_getcount(struct semaphore *sem)
+{
+	return sem->counter;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-frv/sembuf.h b/include/asm-frv/sembuf.h
new file mode 100644
index 000000000000..164b12786d6d
--- /dev/null
+++ b/include/asm-frv/sembuf.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm	sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t		sem_otime;	/* last semop time */
+	unsigned long		__unused1;
+	__kernel_time_t		sem_ctime;	/* last change time */
+	unsigned long		__unused2;
+	unsigned long		sem_nsems;	/* no. of semaphores in array */
+	unsigned long		__unused3;
+	unsigned long		__unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
+
diff --git a/include/asm-frv/serial-regs.h b/include/asm-frv/serial-regs.h
new file mode 100644
index 000000000000..e1286bda00eb
--- /dev/null
+++ b/include/asm-frv/serial-regs.h
@@ -0,0 +1,44 @@
+/* serial-regs.h: serial port registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <linux/serial_reg.h>
+#include <asm/irc-regs.h>
+
+#define SERIAL_ICLK	33333333	/* the target serial input clock */
+#define UART0_BASE	0xfeff9c00
+#define UART1_BASE	0xfeff9c40
+
+#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; })
+#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; })
+#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0)
+#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0)
+
+#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); })
+#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); })
+
+#define __set_UART0_IER(V) __set_UART0(UART_IER,(V))
+#define __set_UART1_IER(V) __set_UART1(UART_IER,(V))
+
+/* serial prescaler select register */
+#define __get_UCPSR()	({ *(volatile unsigned long *)(0xfeff9c90); })
+#define __set_UCPSR(V)	do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0)
+#define UCPSR_SELECT0	0x07000000
+#define UCPSR_SELECT1	0x38000000
+
+/* serial prescaler base value register */
+#define __get_UCPVR()	({ *(volatile unsigned long *)(0xfeff9c98); mb(); })
+#define __set_UCPVR(V)	do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0)
+
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/include/asm-frv/serial.h b/include/asm-frv/serial.h
new file mode 100644
index 000000000000..6917d556a1e1
--- /dev/null
+++ b/include/asm-frv/serial.h
@@ -0,0 +1,19 @@
+/*
+ * serial.h
+ *
+ * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/)
+ * Author: Bernardo Innocenti <bernie@codewiz.org>
+ *
+ * Based on linux/include/asm-i386/serial.h
+ */
+#include <linux/config.h>
+#include <asm/serial-regs.h>
+
+/*
+ * the base baud is derived from the clock speed and so is variable
+ */
+#define BASE_BAUD 0
+
+#define STD_COM_FLAGS		ASYNC_BOOT_AUTOCONF
+
+#define SERIAL_PORT_DFNS
diff --git a/include/asm-frv/setup.h b/include/asm-frv/setup.h
new file mode 100644
index 000000000000..0d293b9a5857
--- /dev/null
+++ b/include/asm-frv/setup.h
@@ -0,0 +1,25 @@
+/* setup.h: setup stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+extern unsigned long __initdata num_mappedpages;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SETUP_H */
diff --git a/include/asm-frv/shmbuf.h b/include/asm-frv/shmbuf.h
new file mode 100644
index 000000000000..4c6e711a4779
--- /dev/null
+++ b/include/asm-frv/shmbuf.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
+
diff --git a/include/asm-frv/shmparam.h b/include/asm-frv/shmparam.h
new file mode 100644
index 000000000000..ab711009cfaa
--- /dev/null
+++ b/include/asm-frv/shmparam.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
+
diff --git a/include/asm-frv/sigcontext.h b/include/asm-frv/sigcontext.h
new file mode 100644
index 000000000000..3b263f3cc96f
--- /dev/null
+++ b/include/asm-frv/sigcontext.h
@@ -0,0 +1,26 @@
+/* sigcontext.h: FRV signal context
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/registers.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	struct user_context	sc_context;
+	unsigned long		sc_oldmask; 	/* old sigmask */
+} __attribute__((aligned(8)));
+
+#endif
diff --git a/include/asm-frv/siginfo.h b/include/asm-frv/siginfo.h
new file mode 100644
index 000000000000..d3fd1ca45653
--- /dev/null
+++ b/include/asm-frv/siginfo.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define FPE_MDAOVF	(__SI_FAULT|9)	/* media overflow */
+#undef NSIGFPE
+#define NSIGFPE		9
+
+#endif
+
diff --git a/include/asm-frv/signal.h b/include/asm-frv/signal.h
new file mode 100644
index 000000000000..f18952f86a80
--- /dev/null
+++ b/include/asm-frv/signal.h
@@ -0,0 +1,187 @@
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/include/asm-frv/smp.h b/include/asm-frv/smp.h
new file mode 100644
index 000000000000..5ca771631fd8
--- /dev/null
+++ b/include/asm-frv/smp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
diff --git a/include/asm-frv/socket.h b/include/asm-frv/socket.h
new file mode 100644
index 000000000000..c3be17c7de4b
--- /dev/null
+++ b/include/asm-frv/socket.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
+
diff --git a/include/asm-frv/sockios.h b/include/asm-frv/sockios.h
new file mode 100644
index 000000000000..8a6e4b2074b7
--- /dev/null
+++ b/include/asm-frv/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS__
+#define _ASM_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* _ASM_SOCKIOS__ */
+
diff --git a/include/asm-frv/spinlock.h b/include/asm-frv/spinlock.h
new file mode 100644
index 000000000000..fe385f45d1fd
--- /dev/null
+++ b/include/asm-frv/spinlock.h
@@ -0,0 +1,17 @@
+/* spinlock.h: spinlocks for FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error no spinlocks for FR-V yet
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/include/asm-frv/spr-regs.h b/include/asm-frv/spr-regs.h
new file mode 100644
index 000000000000..ef472f058d9c
--- /dev/null
+++ b/include/asm-frv/spr-regs.h
@@ -0,0 +1,401 @@
+/* spr-regs.h: special-purpose registers on the FRV
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPR_REGS_H
+#define _ASM_SPR_REGS_H
+
+/*
+ * PSR - Processor Status Register
+ */
+#define PSR_ET			0x00000001	/* enable interrupts/exceptions flag */
+#define PSR_PS			0x00000002	/* previous supervisor mode flag */
+#define PSR_S			0x00000004	/* supervisor mode flag */
+#define PSR_PIL			0x00000078	/* processor external interrupt level */
+#define PSR_PIL_0		0x00000000	/* - no interrupt in progress */
+#define PSR_PIL_13		0x00000068	/* - debugging only */
+#define PSR_PIL_14		0x00000070	/* - debugging in progress */
+#define PSR_PIL_15		0x00000078	/* - NMI in progress */
+#define PSR_EM			0x00000080	/* enable media operation */
+#define PSR_EF			0x00000100	/* enable FPU operation */
+#define PSR_BE			0x00001000	/* endianness mode */
+#define PSR_BE_LE		0x00000000	/* - little endian mode */
+#define PSR_BE_BE		0x00001000	/* - big endian mode */
+#define PSR_CM			0x00002000	/* conditional mode */
+#define PSR_NEM			0x00004000	/* non-excepting mode */
+#define PSR_ICE			0x00010000	/* in-circuit emulation mode */
+#define PSR_VERSION_SHIFT	24		/* CPU silicon ID */
+#define PSR_IMPLE_SHIFT		28		/* CPU core ID */
+
+#define PSR_VERSION(psr)	(((psr) >> PSR_VERSION_SHIFT) & 0xf)
+#define PSR_IMPLE(psr)		(((psr) >> PSR_IMPLE_SHIFT) & 0xf)
+
+#define PSR_IMPLE_FR401		0x2
+#define PSR_VERSION_FR401_MB93401	0x0
+#define PSR_VERSION_FR401_MB93401A	0x1
+#define PSR_VERSION_FR401_MB93403	0x2
+
+#define PSR_IMPLE_FR405		0x4
+#define PSR_VERSION_FR405_MB93405	0x0
+
+#define PSR_IMPLE_FR451		0x5
+#define PSR_VERSION_FR451_MB93451	0x0
+
+#define PSR_IMPLE_FR501		0x1
+#define PSR_VERSION_FR501_MB93501	0x1
+#define PSR_VERSION_FR501_MB93501A	0x2
+
+#define PSR_IMPLE_FR551		0x3
+#define PSR_VERSION_FR551_MB93555	0x1
+
+#define __get_PSR()	({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; })
+#define __set_PSR(V)	do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0)
+
+/*
+ * TBR - Trap Base Register
+ */
+#define TBR_TT			0x00000ff0
+#define TBR_TT_INSTR_MMU_MISS	(0x01 << 4)
+#define TBR_TT_INSTR_ACC_ERROR	(0x02 << 4)
+#define TBR_TT_INSTR_ACC_EXCEP	(0x03 << 4)
+#define TBR_TT_PRIV_INSTR	(0x06 << 4)
+#define TBR_TT_ILLEGAL_INSTR	(0x07 << 4)
+#define TBR_TT_FP_EXCEPTION	(0x0d << 4)
+#define TBR_TT_MP_EXCEPTION	(0x0e << 4)
+#define TBR_TT_DATA_ACC_ERROR	(0x11 << 4)
+#define TBR_TT_DATA_MMU_MISS	(0x12 << 4)
+#define TBR_TT_DATA_ACC_EXCEP	(0x13 << 4)
+#define TBR_TT_DATA_STR_ERROR	(0x14 << 4)
+#define TBR_TT_DIVISION_EXCEP	(0x17 << 4)
+#define TBR_TT_COMMIT_EXCEP	(0x19 << 4)
+#define TBR_TT_INSTR_TLB_MISS	(0x1a << 4)
+#define TBR_TT_DATA_TLB_MISS	(0x1b << 4)
+#define TBR_TT_DATA_DAT_EXCEP	(0x1d << 4)
+#define TBR_TT_DECREMENT_TIMER	(0x1f << 4)
+#define TBR_TT_COMPOUND_EXCEP	(0x20 << 4)
+#define TBR_TT_INTERRUPT_1	(0x21 << 4)
+#define TBR_TT_INTERRUPT_2	(0x22 << 4)
+#define TBR_TT_INTERRUPT_3	(0x23 << 4)
+#define TBR_TT_INTERRUPT_4	(0x24 << 4)
+#define TBR_TT_INTERRUPT_5	(0x25 << 4)
+#define TBR_TT_INTERRUPT_6	(0x26 << 4)
+#define TBR_TT_INTERRUPT_7	(0x27 << 4)
+#define TBR_TT_INTERRUPT_8	(0x28 << 4)
+#define TBR_TT_INTERRUPT_9	(0x29 << 4)
+#define TBR_TT_INTERRUPT_10	(0x2a << 4)
+#define TBR_TT_INTERRUPT_11	(0x2b << 4)
+#define TBR_TT_INTERRUPT_12	(0x2c << 4)
+#define TBR_TT_INTERRUPT_13	(0x2d << 4)
+#define TBR_TT_INTERRUPT_14	(0x2e << 4)
+#define TBR_TT_INTERRUPT_15	(0x2f << 4)
+#define TBR_TT_TRAP0		(0x80 << 4)
+#define TBR_TT_TRAP1		(0x81 << 4)
+#define TBR_TT_TRAP2		(0x82 << 4)
+#define TBR_TT_TRAP126		(0xfe << 4)
+#define TBR_TT_BREAK		(0xff << 4)
+
+#define __get_TBR()	({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
+
+/*
+ * HSR0 - Hardware Status Register 0
+ */
+#define HSR0_PDM		0x00000007	/* power down mode */
+#define HSR0_PDM_NORMAL		0x00000000	/* - normal mode */
+#define HSR0_PDM_CORE_SLEEP	0x00000001	/* - CPU core sleep mode */
+#define HSR0_PDM_BUS_SLEEP	0x00000003	/* - bus sleep mode */
+#define HSR0_PDM_PLL_RUN	0x00000005	/* - PLL run */
+#define HSR0_PDM_PLL_STOP	0x00000007	/* - PLL stop */
+#define HSR0_GRLE		0x00000040	/* GR lower register set enable */
+#define HSR0_GRHE		0x00000080	/* GR higher register set enable */
+#define HSR0_FRLE		0x00000100	/* FR lower register set enable */
+#define HSR0_FRHE		0x00000200	/* FR higher register set enable */
+#define HSR0_GRN		0x00000400	/* GR quantity */
+#define HSR0_GRN_64		0x00000000	/* - 64 GR registers */
+#define HSR0_GRN_32		0x00000400	/* - 32 GR registers */
+#define HSR0_FRN		0x00000800	/* FR quantity */
+#define HSR0_FRN_64		0x00000000	/* - 64 FR registers */
+#define HSR0_FRN_32		0x00000800	/* - 32 FR registers */
+#define HSR0_SA			0x00001000	/* start address (RAMBOOT#) */
+#define HSR0_ETMI		0x00008000	/* enable TIMERI (64-bit up timer) */
+#define HSR0_ETMD		0x00004000	/* enable TIMERD (32-bit down timer) */
+#define HSR0_PEDAT		0x00010000	/* previous DAT mode */
+#define HSR0_XEDAT		0x00020000	/* exception DAT mode */
+#define HSR0_EDAT		0x00080000	/* enable DAT mode */
+#define HSR0_RME		0x00400000	/* enable RAM mode */
+#define HSR0_EMEM		0x00800000	/* enable MMU_Miss mask */
+#define HSR0_EXMMU		0x01000000	/* enable extended MMU mode */
+#define HSR0_EDMMU		0x02000000	/* enable data MMU */
+#define HSR0_EIMMU		0x04000000	/* enable instruction MMU */
+#define HSR0_CBM		0x08000000	/* copy back mode */
+#define HSR0_CBM_WRITE_THRU	0x00000000	/* - write through */
+#define HSR0_CBM_COPY_BACK	0x08000000	/* - copy back */
+#define HSR0_NWA		0x10000000	/* no write allocate */
+#define HSR0_DCE		0x40000000	/* data cache enable */
+#define HSR0_ICE		0x80000000	/* instruction cache enable */
+
+#define __get_HSR(R)	({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; })
+#define __set_HSR(R,V)	do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0)
+
+/*
+ * CCR - Condition Codes Register
+ */
+#define CCR_FCC0		0x0000000f	/* FP/Media condition 0 (fcc0 reg) */
+#define CCR_FCC1		0x000000f0	/* FP/Media condition 1 (fcc1 reg) */
+#define CCR_FCC2		0x00000f00	/* FP/Media condition 2 (fcc2 reg) */
+#define CCR_FCC3		0x0000f000	/* FP/Media condition 3 (fcc3 reg) */
+#define CCR_ICC0		0x000f0000	/* Integer condition 0 (icc0 reg) */
+#define CCR_ICC0_C		0x00010000	/* - Carry flag */
+#define CCR_ICC0_V		0x00020000	/* - Overflow flag */
+#define CCR_ICC0_Z		0x00040000	/* - Zero flag */
+#define CCR_ICC0_N		0x00080000	/* - Negative flag */
+#define CCR_ICC1		0x00f00000	/* Integer condition 1 (icc1 reg) */
+#define CCR_ICC2		0x0f000000	/* Integer condition 2 (icc2 reg) */
+#define CCR_ICC3		0xf0000000	/* Integer condition 3 (icc3 reg) */
+
+/*
+ * CCCR - Condition Codes for Conditional Instructions Register
+ */
+#define CCCR_CC0		0x00000003	/* condition 0 (cc0 reg) */
+#define CCCR_CC0_FALSE		0x00000002	/* - condition is false */
+#define CCCR_CC0_TRUE		0x00000003	/* - condition is true */
+#define CCCR_CC1		0x0000000c	/* condition 1 (cc1 reg) */
+#define CCCR_CC2		0x00000030	/* condition 2 (cc2 reg) */
+#define CCCR_CC3		0x000000c0	/* condition 3 (cc3 reg) */
+#define CCCR_CC4		0x00000300	/* condition 4 (cc4 reg) */
+#define CCCR_CC5		0x00000c00	/* condition 5 (cc5 reg) */
+#define CCCR_CC6		0x00003000	/* condition 6 (cc6 reg) */
+#define CCCR_CC7		0x0000c000	/* condition 7 (cc7 reg) */
+
+/*
+ * ISR - Integer Status Register
+ */
+#define ISR_EMAM		0x00000001	/* memory misaligned access handling */
+#define ISR_EMAM_EXCEPTION	0x00000000	/* - generate exception */
+#define ISR_EMAM_FUDGE		0x00000001	/* - mask out invalid address bits */
+#define ISR_AEXC		0x00000004	/* accrued [overflow] exception */
+#define ISR_DTT			0x00000018	/* division type trap */
+#define ISR_DTT_IGNORE		0x00000000	/* - ignore division error */
+#define ISR_DTT_DIVBYZERO	0x00000008	/* - generate exception */
+#define ISR_DTT_OVERFLOW	0x00000010	/* - record overflow */
+#define ISR_EDE			0x00000020	/* enable division exception */
+#define ISR_PLI			0x20000000	/* pre-load instruction information */
+#define ISR_QI			0x80000000	/* quad data implementation information */
+
+/*
+ * EPCR0 - Exception PC Register
+ */
+#define EPCR0_V			0x00000001	/* register content validity indicator */
+#define EPCR0_PC		0xfffffffc	/* faulting instruction address */
+
+/*
+ * ESR0/14/15 - Exception Status Register
+ */
+#define ESRx_VALID		0x00000001	/* register content validity indicator */
+#define ESRx_EC			0x0000003e	/* exception type */
+#define ESRx_EC_DATA_STORE	0x00000000	/* - data_store_error */
+#define ESRx_EC_INSN_ACCESS	0x00000006	/* - instruction_access_error */
+#define ESRx_EC_PRIV_INSN	0x00000008	/* - privileged_instruction */
+#define ESRx_EC_ILL_INSN	0x0000000a	/* - illegal_instruction */
+#define ESRx_EC_MP_EXCEP	0x0000001c	/* - mp_exception */
+#define ESRx_EC_DATA_ACCESS	0x00000020	/* - data_access_error */
+#define ESRx_EC_DIVISION	0x00000026	/* - division_exception */
+#define ESRx_EC_ITLB_MISS	0x00000034	/* - instruction_access_TLB_miss */
+#define ESRx_EC_DTLB_MISS	0x00000036	/* - data_access_TLB_miss */
+#define ESRx_EC_DATA_ACCESS_DAT	0x0000003a	/* - data_access_DAT_exception */
+
+#define ESR0_IAEC		0x00000100	/* info for instruction-access-exception */
+#define ESR0_IAEC_RESV		0x00000000	/* - reserved */
+#define ESR0_IAEC_PROT_VIOL	0x00000100	/* - protection violation */
+
+#define ESR0_ATXC		0x00f00000	/* address translation exception code */
+#define ESR0_ATXC_MMU_MISS	0x00000000	/* - MMU miss exception and more (?) */
+#define ESR0_ATXC_MULTI_DAT	0x00800000	/* - multiple DAT entry hit */
+#define ESR0_ATXC_MULTI_SAT	0x00900000	/* - multiple SAT entry hit */
+#define ESR0_ATXC_AMRTLB_MISS	0x00a00000	/* - MMU/TLB miss exception */
+#define ESR0_ATXC_PRIV_EXCEP	0x00c00000	/* - privilege protection fault */
+#define ESR0_ATXC_WP_EXCEP	0x00d00000	/* - write protection fault */
+
+#define ESR0_EAV		0x00000800	/* true if EAR0 register valid */
+#define ESR15_EAV		0x00000800	/* true if EAR15 register valid */
+
+/*
+ * ESFR1 - Exception Status Valid Flag Register
+ */
+#define ESFR1_ESR0		0x00000001	/* true if ESR0 is valid */
+#define ESFR1_ESR14		0x00004000	/* true if ESR14 is valid */
+#define ESFR1_ESR15		0x00008000	/* true if ESR15 is valid */
+
+/*
+ * MSR - Media Status Register
+ */
+#define MSR0_AOVF		0x00000001	/* overflow exception accrued */
+#define MSRx_OVF		0x00000002	/* overflow exception detected */
+#define MSRx_SIE		0x0000003c	/* last SIMD instruction exception detected */
+#define MSRx_SIE_NONE		0x00000000	/* - none detected */
+#define MSRx_SIE_FRkHI_ACCk	0x00000020	/* - exception at FRkHI or ACCk */
+#define MSRx_SIE_FRkLO_ACCk1	0x00000010	/* - exception at FRkLO or ACCk+1 */
+#define MSRx_SIE_FRk1HI_ACCk2	0x00000008	/* - exception at FRk+1HI or ACCk+2 */
+#define MSRx_SIE_FRk1LO_ACCk3	0x00000004	/* - exception at FRk+1LO or ACCk+3 */
+#define MSR0_MTT		0x00007000	/* type of last media trap detected */
+#define MSR0_MTT_NONE		0x00000000	/* - none detected */
+#define MSR0_MTT_OVERFLOW	0x00001000	/* - overflow detected */
+#define MSR0_HI			0x00c00000	/* hardware implementation */
+#define MSR0_HI_ROUNDING	0x00000000	/* - rounding mode */
+#define MSR0_HI_NONROUNDING	0x00c00000	/* - non-rounding mode */
+#define MSR0_EMCI		0x01000000	/* enable media custom instructions */
+#define MSR0_SRDAV		0x10000000	/* select rounding mode of MAVEH */
+#define MSR0_SRDAV_RDAV		0x00000000	/* - controlled by MSR.RDAV */
+#define MSR0_SRDAV_RD		0x10000000	/* - controlled by MSR.RD */
+#define MSR0_RDAV		0x20000000	/* rounding mode of MAVEH */
+#define MSR0_RDAV_NEAREST_MI	0x00000000	/* - round to nearest minus */
+#define MSR0_RDAV_NEAREST_PL	0x20000000	/* - round to nearest plus */
+#define MSR0_RD			0xc0000000	/* rounding mode */
+#define MSR0_RD_NEAREST		0x00000000	/* - nearest */
+#define MSR0_RD_ZERO		0x40000000	/* - zero */
+#define MSR0_RD_POS_INF		0x80000000	/* - postive infinity */
+#define MSR0_RD_NEG_INF		0xc0000000	/* - negative infinity */
+
+/*
+ * IAMPR0-7 - Instruction Address Mapping Register
+ * DAMPR0-7 - Data Address Mapping Register
+ */
+#define xAMPRx_V		0x00000001	/* register content validity indicator */
+#define DAMPRx_WP		0x00000002	/* write protect */
+#define DAMPRx_WP_RW		0x00000000	/* - read/write */
+#define DAMPRx_WP_RO		0x00000002	/* - read-only */
+#define xAMPRx_C		0x00000004	/* cached/uncached */
+#define xAMPRx_C_CACHED		0x00000000	/* - cached */
+#define xAMPRx_C_UNCACHED	0x00000004	/* - uncached */
+#define xAMPRx_S		0x00000008	/* supervisor only */
+#define xAMPRx_S_USER		0x00000000	/* - userspace can access */
+#define xAMPRx_S_KERNEL		0x00000008	/* - kernel only */
+#define xAMPRx_SS		0x000000f0	/* segment size */
+#define xAMPRx_SS_16Kb		0x00000000	/* - 16 kilobytes */
+#define xAMPRx_SS_64Kb		0x00000010	/* - 64 kilobytes */
+#define xAMPRx_SS_256Kb		0x00000020	/* - 256 kilobytes */
+#define xAMPRx_SS_1Mb		0x00000030	/* - 1 megabyte */
+#define xAMPRx_SS_2Mb		0x00000040	/* - 2 megabytes */
+#define xAMPRx_SS_4Mb		0x00000050	/* - 4 megabytes */
+#define xAMPRx_SS_8Mb		0x00000060	/* - 8 megabytes */
+#define xAMPRx_SS_16Mb		0x00000070	/* - 16 megabytes */
+#define xAMPRx_SS_32Mb		0x00000080	/* - 32 megabytes */
+#define xAMPRx_SS_64Mb		0x00000090	/* - 64 megabytes */
+#define xAMPRx_SS_128Mb		0x000000a0	/* - 128 megabytes */
+#define xAMPRx_SS_256Mb		0x000000b0	/* - 256 megabytes */
+#define xAMPRx_SS_512Mb		0x000000c0	/* - 512 megabytes */
+#define xAMPRx_RESERVED8	0x00000100	/* reserved bit */
+#define xAMPRx_NG		0x00000200	/* non-global */
+#define xAMPRx_L		0x00000400	/* locked */
+#define xAMPRx_M		0x00000800	/* modified */
+#define xAMPRx_D		0x00001000	/* DAT entry */
+#define xAMPRx_RESERVED13	0x00002000	/* reserved bit */
+#define xAMPRx_PPFN		0xfff00000	/* physical page frame number */
+
+#define xAMPRx_V_BIT		0
+#define DAMPRx_WP_BIT		1
+#define xAMPRx_C_BIT		2
+#define xAMPRx_S_BIT		3
+#define xAMPRx_RESERVED8_BIT	8
+#define xAMPRx_NG_BIT		9
+#define xAMPRx_L_BIT		10
+#define xAMPRx_M_BIT		11
+#define xAMPRx_D_BIT		12
+#define xAMPRx_RESERVED13_BIT	13
+
+#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; })
+
+#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; })
+
+#define __set_IAMPR(R,V) 	do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0)
+#define __set_DAMPR(R,V)  	do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0)
+
+#define __set_IAMLR(R,V) 	do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0)
+#define __set_DAMLR(R,V)  	do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0)
+
+#define save_dampr(R, _dampr)					\
+do {								\
+	asm volatile("movsg dampr"R",%0" : "=r"(_dampr));	\
+} while(0)
+
+#define restore_dampr(R, _dampr)			\
+do {							\
+	asm volatile("movgs %0,dampr"R :: "r"(_dampr));	\
+} while(0)
+
+/*
+ * AMCR - Address Mapping Control Register
+ */
+#define AMCR_IAMRN		0x000000ff	/* quantity of IAMPR registers */
+#define AMCR_DAMRN		0x0000ff00	/* quantity of DAMPR registers */
+
+/*
+ * TTBR - Address Translation Table Base Register
+ */
+#define __get_TTBR()		({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; })
+
+/*
+ * TPXR - TLB Probe Extend Register
+ */
+#define TPXR_E			0x00000001
+#define TPXR_LMAX_SHIFT		20
+#define TPXR_LMAX_SMASK		0xf
+#define TPXR_WMAX_SHIFT		24
+#define TPXR_WMAX_SMASK		0xf
+#define TPXR_WAY_SHIFT		28
+#define TPXR_WAY_SMASK		0xf
+
+/*
+ * DCR - Debug Control Register
+ */
+#define DCR_IBCE3		0x00000001	/* break on conditional insn pointed to by IBAR3 */
+#define DCR_IBE3		0x00000002	/* break on insn pointed to by IBAR3 */
+#define DCR_IBCE1		0x00000004	/* break on conditional insn pointed to by IBAR2 */
+#define DCR_IBE1		0x00000008	/* break on insn pointed to by IBAR2 */
+#define DCR_IBCE2		0x00000010	/* break on conditional insn pointed to by IBAR1 */
+#define DCR_IBE2		0x00000020	/* break on insn pointed to by IBAR1 */
+#define DCR_IBCE0		0x00000040	/* break on conditional insn pointed to by IBAR0 */
+#define DCR_IBE0		0x00000080	/* break on insn pointed to by IBAR0 */
+
+#define DCR_DDBE1		0x00004000	/* use DBDR1x when checking DBAR1 */
+#define DCR_DWBE1		0x00008000	/* break on store to address in DBAR1/DBMR1x */
+#define DCR_DRBE1		0x00010000	/* break on load from address in DBAR1/DBMR1x */
+#define DCR_DDBE0		0x00020000	/* use DBDR0x when checking DBAR0 */
+#define DCR_DWBE0		0x00040000	/* break on store to address in DBAR0/DBMR0x */
+#define DCR_DRBE0		0x00080000	/* break on load from address in DBAR0/DBMR0x */
+
+#define DCR_EIM			0x0c000000	/* external interrupt disable */
+#define DCR_IBM			0x10000000	/* instruction break disable */
+#define DCR_SE			0x20000000	/* single step enable */
+#define DCR_EBE			0x40000000	/* exception break enable */
+
+/*
+ * BRR - Break Interrupt Request Register
+ */
+#define BRR_ST			0x00000001	/* single-step detected */
+#define BRR_SB			0x00000002	/* break instruction detected */
+#define BRR_BB			0x00000004	/* branch with hint detected */
+#define BRR_CBB			0x00000008	/* branch to LR detected */
+#define BRR_IBx			0x000000f0	/* hardware breakpoint detected */
+#define BRR_DBx			0x00000f00	/* hardware watchpoint detected */
+#define BRR_DBNEx		0x0000f000	/* ? */
+#define BRR_EBTT		0x00ff0000	/* trap type of exception break */
+#define BRR_TB			0x10000000	/* external break request detected */
+#define BRR_CB			0x20000000	/* ICE break command detected */
+#define BRR_EB			0x40000000	/* exception break detected */
+
+/*
+ * BPSR - Break PSR Save Register
+ */
+#define BPSR_BET		0x00000001	/* former PSR.ET */
+#define BPSR_BS			0x00001000	/* former PSR.S */
+
+#endif /* _ASM_SPR_REGS_H */
diff --git a/include/asm-frv/stat.h b/include/asm-frv/stat.h
new file mode 100644
index 000000000000..ce56de9b37ba
--- /dev/null
+++ b/include/asm-frv/stat.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+/* This matches struct stat in uClibc/glibc.  */
+struct stat {
+	unsigned char __pad1[6];
+	unsigned short st_dev;
+
+	unsigned long __pad2;
+	unsigned long st_ino;
+
+	unsigned short __pad3;
+	unsigned short st_mode;
+	unsigned short __pad4;
+	unsigned short st_nlink;
+
+	unsigned short __pad5;
+	unsigned short st_uid;
+	unsigned short __pad6;
+	unsigned short st_gid;
+
+	unsigned char __pad7[6];
+	unsigned short st_rdev;
+
+	unsigned long __pad8;
+	unsigned long st_size;
+
+	unsigned long __pad9;		/* align 64-bit st_blocks to 2-word */
+	unsigned long st_blksize;
+
+	unsigned long __pad10;	/* future possible st_blocks high bits */
+	unsigned long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long __unused1;
+	unsigned long st_atime;
+
+	unsigned long __unused2;
+	unsigned long st_mtime;
+
+	unsigned long __unused3;
+	unsigned long st_ctime;
+
+	unsigned long long __unused4;
+};
+
+/* This matches struct stat64 in uClibc/glibc.  The layout is exactly
+   the same as that of struct stat above, with 64-bit types taking up
+   space that was formerly used by padding.  stat syscalls are still
+   different from stat64, though, in that the former tests for
+   overflow.  */
+struct stat64 {
+	unsigned char __pad1[6];
+	unsigned short st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int st_mode;
+	unsigned int st_nlink;
+
+	unsigned long st_uid;
+	unsigned long st_gid;
+
+	unsigned char __pad2[6];
+	unsigned short st_rdev;
+
+	long long st_size;
+
+	unsigned long __pad3;		/* align 64-bit st_blocks to 2-word */
+	unsigned long st_blksize;
+
+	unsigned long __pad4;		/* future possible st_blocks high bits */
+	unsigned long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long st_atime_nsec;
+	unsigned long st_atime;
+
+	unsigned int st_mtime_nsec;
+	unsigned long st_mtime;
+
+	unsigned long st_ctime_nsec;
+	unsigned long st_ctime;
+
+	unsigned long long __unused4;
+};
+
+#endif /* _ASM_STAT_H */
diff --git a/include/asm-frv/statfs.h b/include/asm-frv/statfs.h
new file mode 100644
index 000000000000..741f586045ba
--- /dev/null
+++ b/include/asm-frv/statfs.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_STATFS_H */
+
diff --git a/include/asm-frv/string.h b/include/asm-frv/string.h
new file mode 100644
index 000000000000..5ed310f64b7e
--- /dev/null
+++ b/include/asm-frv/string.h
@@ -0,0 +1,51 @@
+/* string.h: FRV string handling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_STRING_H_
+#define _ASM_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+#endif /* _ASM_STRING_H_ */
diff --git a/include/asm-frv/suspend.h b/include/asm-frv/suspend.h
new file mode 100644
index 000000000000..5fa7b5a6ee40
--- /dev/null
+++ b/include/asm-frv/suspend.h
@@ -0,0 +1,20 @@
+/* suspend.h: suspension stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SUSPEND_H
+#define _ASM_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+#endif /* _ASM_SUSPEND_H */
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
new file mode 100644
index 000000000000..d2aea70a5f64
--- /dev/null
+++ b/include/asm-frv/system.h
@@ -0,0 +1,128 @@
+/* system.h: FR-V CPU control definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/config.h> /* get configuration macros */
+#include <linux/linkage.h>
+#include <asm/atomic.h>
+
+struct thread_struct;
+
+#define prepare_to_switch()    do { } while(0)
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ * The `mb' is to tell GCC not to cache `current' across this call.
+ */
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev_thread,
+				struct thread_struct *next_thread,
+				struct task_struct *prev);
+
+#define switch_to(prev, next, last)					\
+do {									\
+	(prev)->thread.sched_lr =					\
+		(unsigned long) __builtin_return_address(0);		\
+	(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev));	\
+	mb();								\
+} while(0)
+
+/*
+ * interrupt flag manipulation
+ */
+#define local_irq_disable()				\
+do {							\
+	unsigned long psr;				\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%2,%0	\n"	\
+		     "	ori	%0,%1,%0	\n"	\
+		     "	movgs	%0,psr		\n"	\
+		     : "=r"(psr)			\
+		     : "i" (PSR_PIL_14), "i" (~PSR_PIL)	\
+		     : "memory");			\
+} while(0)
+
+#define local_irq_enable()				\
+do {							\
+	unsigned long psr;				\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%1,%0	\n"	\
+		     "	movgs	%0,psr		\n"	\
+		     : "=r"(psr)			\
+		     : "i" (~PSR_PIL)			\
+		     : "memory");			\
+} while(0)
+
+#define local_save_flags(flags)			\
+do {						\
+	typecheck(unsigned long, flags);	\
+	asm("movsg psr,%0"			\
+	    : "=r"(flags)			\
+	    :					\
+	    : "memory");			\
+} while(0)
+
+#define	local_irq_save(flags)				\
+do {							\
+	unsigned long npsr;				\
+	typecheck(unsigned long, flags);		\
+	asm volatile("	movsg	psr,%0		\n"	\
+		     "	andi	%0,%3,%1	\n"	\
+		     "	ori	%1,%2,%1	\n"	\
+		     "	movgs	%1,psr		\n"	\
+		     : "=r"(flags), "=r"(npsr)		\
+		     : "i" (PSR_PIL_14), "i" (~PSR_PIL)	\
+		     : "memory");			\
+} while(0)
+
+#define	local_irq_restore(flags)			\
+do {							\
+	typecheck(unsigned long, flags);		\
+	asm volatile("	movgs	%0,psr		\n"	\
+		     :					\
+		     : "r" (flags)			\
+		     : "memory");			\
+} while(0)
+
+#define irqs_disabled() \
+	((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop()			asm volatile ("nop"::)
+#define mb()			asm volatile ("membar" : : :"memory")
+#define rmb()			asm volatile ("membar" : : :"memory")
+#define wmb()			asm volatile ("membar" : : :"memory")
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
+
+#define smp_mb()		mb()
+#define smp_rmb()		rmb()
+#define smp_wmb()		wmb()
+
+#define read_barrier_depends()		do {} while(0)
+#define smp_read_barrier_depends()	read_barrier_depends()
+
+#define HARD_RESET_NOW()			\
+do {						\
+	cli();					\
+} while(1)
+
+extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
+extern void free_initmem(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/include/asm-frv/termbits.h b/include/asm-frv/termbits.h
new file mode 100644
index 000000000000..74f20d6e292f
--- /dev/null
+++ b/include/asm-frv/termbits.h
@@ -0,0 +1,177 @@
+#ifndef _ASM_TERMBITS_H__
+#define _ASM_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CTVB	  004000000000		/* VisioBraille Terminal flow control */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_TERMBITS_H__ */
+
diff --git a/include/asm-frv/termios.h b/include/asm-frv/termios.h
new file mode 100644
index 000000000000..b4a664e7f55c
--- /dev/null
+++ b/include/asm-frv/termios.h
@@ -0,0 +1,74 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#include <asm-generic/termios.h>
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h
new file mode 100644
index 000000000000..b80a97f50af6
--- /dev/null
+++ b/include/asm-frv/thread_info.h
@@ -0,0 +1,159 @@
+/* thread_info.h: description
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/thread_info.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block    restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK			0x00000000
+#define TI_EXEC_DOMAIN		0x00000004
+#define TI_FLAGS		0x00000008
+#define TI_STATUS		0x0000000C
+#define TI_CPU			0x00000010
+#define TI_PRE_COUNT		0x00000014
+#define TI_ADDR_LIMIT		0x00000018
+#define TI_RESTART_BLOCK	0x0000001C
+
+#endif
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#ifdef CONFIG_SMALL_TASKS
+#define THREAD_SIZE		4096
+#else
+#define THREAD_SIZE		8192
+#endif
+
+/* how to get the thread information struct from C */
+register struct thread_info *__current_thread_info asm("gr15");
+
+#define current_thread_info() ({ __current_thread_info; })
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+	({							\
+		struct thread_info *ret;			\
+								\
+		ret = kmalloc(THREAD_SIZE, GFP_KERNEL);		\
+		if (ret)					\
+			memset(ret, 0, THREAD_SIZE);		\
+		ret;						\
+	})
+#else
+#define alloc_thread_info(tsk)	kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info)	kfree(info)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#define THREAD_SIZE	8192
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_IRET		5	/* return with iret */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17	/* OOM killer killed process */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_IRET		(1 << TIF_IRET)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPM		0x0001	/* FPU/Media was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-frv/timer-regs.h b/include/asm-frv/timer-regs.h
new file mode 100644
index 000000000000..6c5a871ce5e9
--- /dev/null
+++ b/include/asm-frv/timer-regs.h
@@ -0,0 +1,106 @@
+/* timer-regs.h: hardware timer register definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/sections.h>
+
+extern unsigned long __nongprelbss __clkin_clock_speed_HZ;
+extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __res_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __sdram_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_clock_speed_HZ;
+extern unsigned long __nongprelbss __dsu_clock_speed_HZ;
+extern unsigned long __nongprelbss __serial_clock_speed_HZ;
+
+#define __get_CLKC()	({ *(volatile unsigned long *)(0xfeff9a00); })
+
+static inline void __set_CLKC(unsigned long v)
+{
+	int tmp;
+
+	asm volatile("	st%I0.p	%2,%M0		\n"
+		     "	setlos	%3,%1		\n"
+		     "	membar			\n"
+		     "0:			\n"
+		     "	subicc	%1,#1,%1,icc0	\n"
+		     "	bnc	icc0,#1,0b	\n"
+		     : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp)
+		     : "r"(v), "i"(256)
+		     : "icc0");
+}
+
+#define __get_TCTR()	({ *(volatile unsigned long *)(0xfeff9418); })
+#define __get_TPRV()	({ *(volatile unsigned long *)(0xfeff9420); })
+#define __get_TPRCKSL()	({ *(volatile unsigned long *)(0xfeff9428); })
+#define __get_TCSR(T)	({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); })
+#define __get_TxCKSL(T)	({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); })
+
+#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; })
+
+#define __set_TCTR(V)	do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0)
+#define __set_TPRV(V)	do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0)
+#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0)
+#define __set_TCSR(T,V)	\
+do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TxCKSL(T,V) \
+do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24)
+#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V)))
+
+/* clock control register */
+#define CLKC_CMODE		0x0f000000
+#define CLKC_SLPL		0x000f0000
+#define CLKC_P0			0x00000100
+#define CLKC_CM			0x00000003
+
+#define CLKC_CMODE_s		24
+
+/* timer control register - non-readback mode */
+#define TCTR_MODE_0		0x00000000
+#define TCTR_MODE_2		0x04000000
+#define TCTR_MODE_4		0x08000000
+#define TCTR_MODE_5		0x0a000000
+#define TCTR_RL_LATCH		0x00000000
+#define TCTR_RL_RW_LOW8		0x10000000
+#define TCTR_RL_RW_HIGH8	0x20000000
+#define TCTR_RL_RW_LH8		0x30000000
+#define TCTR_SC_CTR0		0x00000000
+#define TCTR_SC_CTR1		0x40000000
+#define TCTR_SC_CTR2		0x80000000
+
+/* timer control register - readback mode */
+#define TCTR_CNT0		0x02000000
+#define TCTR_CNT1		0x04000000
+#define TCTR_CNT2		0x08000000
+#define TCTR_NSTATUS		0x10000000
+#define TCTR_NCOUNT		0x20000000
+#define TCTR_SC_READBACK	0xc0000000
+
+/* timer control status registers - non-readback mode */
+#define TCSRx_DATA		0xff000000
+
+/* timer control status registers - readback mode */
+#define TCSRx_OUTPUT		0x80000000
+#define TCSRx_NULLCOUNT		0x40000000
+#define TCSRx_RL		0x30000000
+#define TCSRx_MODE		0x07000000
+
+/* timer clock select registers */
+#define TxCKSL_SELECT		0x0f000000
+#define __TxCKSL_SELECT(X)	((X) << 24)
+#define TxCKSL_EIGHT		0xf0000000
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/include/asm-frv/timex.h b/include/asm-frv/timex.h
new file mode 100644
index 000000000000..2aa562fa067b
--- /dev/null
+++ b/include/asm-frv/timex.h
@@ -0,0 +1,25 @@
+/* timex.h: FR-V architecture timex specifications
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1193180 /* Underlying HZ */
+#define CLOCK_TICK_FACTOR	20	/* Factor of both 1000000 and CLOCK_TICK_RATE */
+
+#define FINETUNE							\
+((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) *			\
+   (1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR))	\
+  << (SHIFT_SCALE-SHIFT_HZ)) / HZ)
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#define vxtime_lock()		do {} while (0)
+#define vxtime_unlock()		do {} while (0)
+
+#endif
+
diff --git a/include/asm-frv/tlb.h b/include/asm-frv/tlb.h
new file mode 100644
index 000000000000..f94fe5cb9b3a
--- /dev/null
+++ b/include/asm-frv/tlb.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache() do {} while(0)
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
+
diff --git a/include/asm-frv/tlbflush.h b/include/asm-frv/tlbflush.h
new file mode 100644
index 000000000000..bc3462625084
--- /dev/null
+++ b/include/asm-frv/tlbflush.h
@@ -0,0 +1,77 @@
+/* tlbflush.h: TLB flushing functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef __ASSEMBLY__
+extern void asmlinkage __flush_tlb_all(void);
+extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
+extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
+extern void asmlinkage __flush_tlb_range(unsigned long contextid,
+					 unsigned long start, unsigned long end);
+#endif /* !__ASSEMBLY__ */
+
+#define flush_tlb_all()				\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_all();			\
+	preempt_enable();			\
+} while(0)
+
+#define flush_tlb_mm(mm)			\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_mm((mm)->context.id);	\
+	preempt_enable();			\
+} while(0)
+
+#define flush_tlb_range(vma,start,end)					\
+do {									\
+	preempt_disable();						\
+	__flush_tlb_range((vma)->vm_mm->context.id, start, end);	\
+	preempt_enable();						\
+} while(0)
+
+#define flush_tlb_page(vma,addr)				\
+do {								\
+	preempt_disable();					\
+	__flush_tlb_page((vma)->vm_mm->context.id, addr);	\
+	preempt_enable();					\
+} while(0)
+
+
+#define __flush_tlb_global()			flush_tlb_all()
+#define flush_tlb()				flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)	flush_tlb_all()
+#define flush_tlb_pgtables(mm,start,end) \
+	asm volatile("movgs %0,scr0 ! movgs %0,scr1" :: "r"(ULONG_MAX) : "memory");
+
+#else
+
+#define flush_tlb()				BUG()
+#define flush_tlb_all()				BUG()
+#define flush_tlb_mm(mm)			BUG()
+#define flush_tlb_page(vma,addr)		BUG()
+#define flush_tlb_range(mm,start,end)		BUG()
+#define flush_tlb_pgtables(mm,start,end)	BUG()
+#define flush_tlb_kernel_range(start, end)	BUG()
+
+#endif
+
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/include/asm-frv/topology.h b/include/asm-frv/topology.h
new file mode 100644
index 000000000000..abe7298742ac
--- /dev/null
+++ b/include/asm-frv/topology.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_TOPOLOGY_H
+#define _ASM_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#error NUMA not supported yet
+
+#else /* !CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_TOPOLOGY_H */
diff --git a/include/asm-frv/types.h b/include/asm-frv/types.h
new file mode 100644
index 000000000000..1a5b6546bb41
--- /dev/null
+++ b/include/asm-frv/types.h
@@ -0,0 +1,74 @@
+/* types.h: FRV types
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+typedef u64 u_quad_t;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-frv/uaccess.h b/include/asm-frv/uaccess.h
new file mode 100644
index 000000000000..32dc52e883e5
--- /dev/null
+++ b/include/asm-frv/uaccess.h
@@ -0,0 +1,318 @@
+/* uaccess.h: userspace accessor functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+#define HAVE_ARCH_UNMAPPED_AREA	/* we decide where to put mmaps */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
+{
+#ifdef CONFIG_MMU
+	int flag = -EFAULT, tmp;
+
+	asm volatile (
+		"	addcc	%3,%2,%1,icc0	\n"	/* set C-flag if addr+size>4GB */
+		"	subcc.p	%1,%4,gr0,icc1	\n"	/* jump if addr+size>limit */
+		"	bc	icc0,#0,0f	\n"
+		"	bhi	icc1,#0,0f	\n"
+		"	setlos	#0,%0		\n"	/* mark okay */
+		"0:				\n"
+		: "=r"(flag), "=&r"(tmp)
+		: "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag)
+		);
+
+	return flag;
+
+#else
+
+	if (addr < memory_start ||
+	    addr > memory_end ||
+	    size > memory_end - memory_start ||
+	    addr + size > memory_end)
+		return -EFAULT;
+
+	return 0;
+#endif
+}
+
+#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size))
+
+#define access_ok(type,addr,size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
+
+/* this function will go away soon - use access_ok() / __range_ok() instead */
+static inline int __deprecated verify_area(int type, const void * addr, unsigned long size)
+{
+	return __range_ok(addr, size);
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+									\
+	typeof(*(ptr)) __pu_val = (x);					\
+									\
+	switch (sizeof (*(ptr))) {					\
+	case 1:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "b", "r");	\
+		break;							\
+	case 2:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "h", "r");	\
+		break;							\
+	case 4:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "",  "r");	\
+		break;							\
+	case 8:								\
+		__put_user_asm(__pu_err, __pu_val, ptr, "d", "e");	\
+		break;							\
+	default:							\
+		__pu_err = __put_user_bad();				\
+		break;							\
+	}								\
+	__pu_err;							\
+})
+
+#define put_user(x, ptr)			\
+({						\
+	typeof(&*ptr) _p = (ptr);		\
+	int _e;					\
+						\
+	_e = __range_ok(_p, sizeof(*_p));	\
+	if (_e == 0)				\
+		_e = __put_user((x), _p);	\
+	_e;					\
+})
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#ifdef CONFIG_MMU
+
+#define __put_user_asm(err,x,ptr,dsize,constraint)					\
+do {											\
+	asm volatile("1:	st"dsize"%I1	%2,%M1	\n"				\
+		     "2:				\n"				\
+		     ".subsection 2			\n"				\
+		     "3:	setlos		%3,%0	\n"				\
+		     "		bra		2b	\n"				\
+		     ".previous				\n"				\
+		     ".section __ex_table,\"a\"		\n"				\
+		     "		.balign		8	\n"				\
+		     "		.long		1b,3b	\n"				\
+		     ".previous"							\
+		     : "=r" (err)							\
+		     : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err)	\
+		     : "memory");							\
+} while (0)
+
+#else
+
+#define __put_user_asm(err,x,ptr,bwl,con)	\
+do {						\
+	asm("	st"bwl"%I0	%1,%M0	\n"	\
+	    "	membar			\n"	\
+	    :					\
+	    : "m" (*__ptr(ptr)), con (x)	\
+	    : "memory");			\
+} while (0)
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define __get_user(x, ptr)						\
+({									\
+	typeof(*(ptr)) __gu_val = 0;					\
+	int __gu_err = 0;						\
+									\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r");	\
+		break;							\
+	case 2:								\
+		__get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r");	\
+		break;							\
+	case 4:								\
+		__get_user_asm(__gu_err, __gu_val, ptr, "", "=r");	\
+		break;							\
+	case 8:								\
+		__get_user_asm(__gu_err, __gu_val, ptr, "d", "=e");	\
+		break;							\
+	default:							\
+		__gu_err = __get_user_bad();				\
+		break;							\
+	}								\
+	(x) = __gu_val;							\
+	__gu_err;							\
+})
+
+#define get_user(x, ptr)			\
+({						\
+	typeof(&*ptr) _p = (ptr);		\
+	int _e;					\
+						\
+	_e = __range_ok(_p, sizeof(*_p));	\
+	if (likely(_e == 0))			\
+		_e = __get_user((x), _p);	\
+	else					\
+		(x) = (typeof(x)) 0;		\
+	_e;					\
+})
+
+extern int __get_user_bad(void);
+
+#ifdef CONFIG_MMU
+
+#define __get_user_asm(err,x,ptr,dtype,constraint)	\
+do {							\
+	asm("1:		ld"dtype"%I2	%M2,%1	\n"	\
+	    "2:					\n"	\
+	    ".subsection 2			\n"	\
+	    "3:		setlos		%3,%0	\n"	\
+	    "		setlos		#0,%1	\n"	\
+	    "		bra		2b	\n"	\
+	    ".previous				\n"	\
+	    ".section __ex_table,\"a\"		\n"	\
+	    "		.balign		8	\n"	\
+	    "		.long		1b,3b	\n"	\
+	    ".previous"					\
+	    : "=r" (err), constraint (x)		\
+	    : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err)	\
+	    );						\
+} while(0)
+
+#else
+
+#define __get_user_asm(err,x,ptr,bwl,con)	\
+	asm("	ld"bwl"%I1	%M1,%0	\n"	\
+	    "	membar			\n"	\
+	    : con(x)				\
+	    : "m" (*__ptr(ptr)))
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#ifdef CONFIG_MMU
+extern long __memset_user(void *dst, unsigned long count);
+extern long __memcpy_user(void *dst, const void *src, unsigned long count);
+
+#define clear_user(dst,count)			__memset_user((dst), (count))
+#define __copy_from_user_inatomic(to, from, n)	__memcpy_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n)	__memcpy_user((to), (from), (n))
+
+#else
+
+#define clear_user(dst,count)			(memset((dst), 0, (count)), 0)
+#define __copy_from_user_inatomic(to, from, n)	(memcpy((to), (from), (n)), 0)
+#define __copy_to_user_inatomic(to, from, n)	(memcpy((to), (from), (n)), 0)
+
+#endif
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline long copy_from_user(void *to, const void *from, unsigned long n)
+{
+	unsigned long ret = n;
+
+	if (likely(__access_ok(from, n)))
+		ret = __copy_from_user(to, from, n);
+
+	if (unlikely(ret != 0))
+		memset(to + (n - ret), 0, ret);
+
+	return ret;
+}
+
+static inline long copy_to_user(void *to, const void *from, unsigned long n)
+{
+	return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
+}
+
+#define copy_to_user_ret(to,from,n,retval)	({ if (copy_to_user(to,from,n)) return retval; })
+#define copy_from_user_ret(to,from,n,retval)	({ if (copy_from_user(to,from,n)) return retval; })
+
+extern long strncpy_from_user(char *dst, const char *src, long count);
+extern long strnlen_user(const char *src, long count);
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+extern unsigned long search_exception_table(unsigned long addr);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-frv/ucontext.h b/include/asm-frv/ucontext.h
new file mode 100644
index 000000000000..8d8c0c948007
--- /dev/null
+++ b/include/asm-frv/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long		uc_flags;
+	struct ucontext		*uc_link;
+	stack_t			uc_stack;
+	struct sigcontext	uc_mcontext;
+	sigset_t		uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/include/asm-frv/unaligned.h b/include/asm-frv/unaligned.h
new file mode 100644
index 000000000000..a0d199bf01d9
--- /dev/null
+++ b/include/asm-frv/unaligned.h
@@ -0,0 +1,203 @@
+/* unaligned.h: unaligned access handler
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <linux/config.h>
+
+/*
+ * Unaligned accesses on uClinux can't be performed in a fault handler - the
+ * CPU detects them as imprecise exceptions making this impossible.
+ *
+ * With the FR451, however, they are precise, and so we used to fix them up in
+ * the memory access fault handler.  However, instruction bundling make this
+ * impractical.  So, now we fall back to using memcpy.
+ */
+#ifdef CONFIG_MMU
+
+/*
+ * The asm statement in the macros below is a way to get GCC to copy a
+ * value from one variable to another without having any clue it's
+ * actually doing so, so that it won't have any idea that the values
+ * in the two variables are related.
+ */
+
+#define get_unaligned(ptr) ({				\
+	typeof((*(ptr))) __x;				\
+	void *__ptrcopy;				\
+	asm("" : "=r" (__ptrcopy) : "0" (ptr));		\
+	memcpy(&__x, __ptrcopy, sizeof(*(ptr)));	\
+	__x;						\
+})
+
+#define put_unaligned(val, ptr) ({			\
+	typeof((*(ptr))) __x = (val);			\
+	void *__ptrcopy;				\
+	asm("" : "=r" (__ptrcopy) : "0" (ptr));		\
+	memcpy(__ptrcopy, &__x, sizeof(*(ptr)));	\
+})
+
+extern int handle_misalignment(unsigned long esr0, unsigned long ear0, unsigned long epcr0);
+
+#else
+
+#define get_unaligned(ptr)							\
+({										\
+	typeof(*(ptr)) x;							\
+	const char *__p = (const char *) (ptr);					\
+										\
+	switch (sizeof(x)) {							\
+	case 1:									\
+		x = *(ptr);							\
+		break;								\
+	case 2:									\
+	{									\
+		uint8_t a;							\
+		asm("	ldub%I2		%M2,%0		\n"			\
+		    "	ldub%I3.p	%M3,%1		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%1,%0	\n"			\
+		    : "=&r"(x), "=&r"(a)					\
+		    : "m"(__p[0]),  "m"(__p[1])					\
+		    );								\
+		break;								\
+	}									\
+										\
+	case 4:									\
+	{									\
+		uint8_t a;							\
+		asm("	ldub%I2		%M2,%0		\n"			\
+		    "	ldub%I3.p	%M3,%1		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%1,%0	\n"			\
+		    "	ldub%I4.p	%M4,%1		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%1,%0	\n"			\
+		    "	ldub%I5.p	%M5,%1		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%1,%0	\n"			\
+		    : "=&r"(x), "=&r"(a)					\
+		    : "m"(__p[0]),  "m"(__p[1]), "m"(__p[2]), "m"(__p[3])	\
+		    );								\
+		break;								\
+	}									\
+										\
+	case 8:									\
+	{									\
+		union { uint64_t x; u32 y[2]; } z;				\
+		uint8_t a;							\
+		asm("	ldub%I3		%M3,%0		\n"			\
+		    "	ldub%I4.p	%M4,%2		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%2,%0	\n"			\
+		    "	ldub%I5.p	%M5,%2		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%2,%0	\n"			\
+		    "	ldub%I6.p	%M6,%2		\n"			\
+		    "	slli		%0,#8,%0	\n"			\
+		    "	or		%0,%2,%0	\n"			\
+		    "	ldub%I7		%M7,%1		\n"			\
+		    "	ldub%I8.p	%M8,%2		\n"			\
+		    "	slli		%1,#8,%1	\n"			\
+		    "	or		%1,%2,%1	\n"			\
+		    "	ldub%I9.p	%M9,%2		\n"			\
+		    "	slli		%1,#8,%1	\n"			\
+		    "	or		%1,%2,%1	\n"			\
+		    "	ldub%I10.p	%M10,%2		\n"			\
+		    "	slli		%1,#8,%1	\n"			\
+		    "	or		%1,%2,%1	\n"			\
+		    : "=&r"(z.y[0]), "=&r"(z.y[1]), "=&r"(a)			\
+		    : "m"(__p[0]), "m"(__p[1]), "m"(__p[2]), "m"(__p[3]),	\
+		      "m"(__p[4]), "m"(__p[5]), "m"(__p[6]), "m"(__p[7])	\
+		    );								\
+		x = z.x;							\
+		break;								\
+	}									\
+										\
+	default:								\
+		x = 0;								\
+		BUG();								\
+		break;								\
+	}									\
+										\
+	x;									\
+})
+
+#define put_unaligned(val, ptr)								\
+do {											\
+	char *__p = (char *) (ptr);							\
+	int x;										\
+											\
+	switch (sizeof(*ptr)) {								\
+	case 2:										\
+	{										\
+		asm("	stb%I1.p	%0,%M1		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I2		%0,%M2		\n"				\
+		    : "=r"(x), "=m"(__p[1]),  "=m"(__p[0])				\
+		    : "0"(val)								\
+		    );									\
+		break;									\
+	}										\
+											\
+	case 4:										\
+	{										\
+		asm("	stb%I1.p	%0,%M1		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I2.p	%0,%M2		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I3.p	%0,%M3		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I4		%0,%M4		\n"				\
+		    : "=r"(x), "=m"(__p[3]),  "=m"(__p[2]), "=m"(__p[1]), "=m"(__p[0])	\
+		    : "0"(val)								\
+		    );									\
+		break;									\
+	}										\
+											\
+	case 8:										\
+	{										\
+		uint32_t __high, __low;							\
+		__high = (uint64_t)val >> 32;						\
+		__low = val & 0xffffffff;						\
+		asm("	stb%I2.p	%0,%M2		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I3.p	%0,%M3		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I4.p	%0,%M4		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I5.p	%0,%M5		\n"				\
+		    "	srli		%0,#8,%0	\n"				\
+		    "	stb%I6.p	%1,%M6		\n"				\
+		    "	srli		%1,#8,%1	\n"				\
+		    "	stb%I7.p	%1,%M7		\n"				\
+		    "	srli		%1,#8,%1	\n"				\
+		    "	stb%I8.p	%1,%M8		\n"				\
+		    "	srli		%1,#8,%1	\n"				\
+		    "	stb%I9		%1,%M9		\n"				\
+		    : "=&r"(__low), "=&r"(__high), "=m"(__p[7]), "=m"(__p[6]), 		\
+		      "=m"(__p[5]), "=m"(__p[4]), "=m"(__p[3]), "=m"(__p[2]), 		\
+		      "=m"(__p[1]), "=m"(__p[0])					\
+		    : "0"(__low), "1"(__high)						\
+		    );									\
+		break;									\
+	}										\
+											\
+        default:									\
+		*(ptr) = (val);								\
+		break;									\
+	}										\
+} while(0)
+
+#endif
+
+#endif
diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h
new file mode 100644
index 000000000000..5cf989b448d5
--- /dev/null
+++ b/include/asm-frv/unistd.h
@@ -0,0 +1,501 @@
+#ifndef _ASM_UNISTD_H_
+#define _ASM_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+// #define __NR_oldolduname	 /* 59 */ obsolete
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+// #define __NR_mmap		 90	/* obsolete - not implemented */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+// #define __NR_profil		 /* 98 */ obsolete
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+// #define __NR_ioperm		/* 101 */ not supported
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+// #define __NR_olduname		/* 109 */ obsolete
+// #define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+// #define __NR_idle		/* 112 */ Obsolete
+// #define __NR_vm86old		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+// #define __NR_modify_ldt	/* 123 */ not supported
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+// #define __NR_vm86		/* 166 */ not supported
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+#define __NR_security		223	/* syscall for security modules */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_sys_kexec_load	283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_vperfctr_open	289
+#define __NR_vperfctr_control	(__NR_perfctr_info+1)
+#define __NR_vperfctr_unlink	(__NR_perfctr_info+2)
+#define __NR_vperfctr_iresume	(__NR_perfctr_info+3)
+#define __NR_vperfctr_read	(__NR_perfctr_info+4)
+
+#define NR_syscalls 294
+
+/*
+ * process the return value of a syscall, consigning it to one of two possible fates
+ * - user-visible error numbers are in the range -1 - -4095: see <asm-frv/errno.h>
+ */
+#undef __syscall_return
+#define __syscall_return(type, res)					\
+do {									\
+        unsigned long __sr2 = (res);					\
+	if (__builtin_expect(__sr2 >= (unsigned long)(-4095), 0)) {	\
+		errno = (-__sr2);					\
+		__sr2 = ULONG_MAX;					\
+	}								\
+	return (type) __sr2;						\
+} while (0)
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+
+#undef _syscall0
+#define _syscall0(type,name)						\
+type name(void)								\
+{									\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);	\
+	register unsigned long __sc0 __asm__ ("gr8");			\
+	__asm__ __volatile__ ("tira gr0,#0"				\
+			      : "=r" (__sc0)				\
+			      : "r" (__scnum));				\
+	__syscall_return(type, __sc0);					\
+}
+
+#undef _syscall1
+#define _syscall1(type,name,type1,arg1)						\
+type name(type1 arg1)								\
+{										\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);		\
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;	\
+	__asm__ __volatile__ ("tira gr0,#0"					\
+			      : "+r" (__sc0)					\
+			      : "r" (__scnum));					\
+	__syscall_return(type, __sc0);						\
+}
+
+#undef _syscall2
+#define _syscall2(type,name,type1,arg1,type2,arg2)				\
+type name(type1 arg1,type2 arg2)						\
+{										\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);		\
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;	\
+	register unsigned long __sc1 __asm__ ("gr9") = (unsigned long) arg2;	\
+	__asm__ __volatile__ ("tira gr0,#0"					\
+			      : "+r" (__sc0)					\
+			      : "r" (__scnum), "r" (__sc1));			\
+	__syscall_return(type, __sc0);						\
+}
+
+#undef _syscall3
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)			\
+type name(type1 arg1,type2 arg2,type3 arg3)					\
+{										\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);		\
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;	\
+	register unsigned long __sc1 __asm__ ("gr9") = (unsigned long) arg2;	\
+	register unsigned long __sc2 __asm__ ("gr10") = (unsigned long) arg3;	\
+	__asm__ __volatile__ ("tira gr0,#0"					\
+			      : "+r" (__sc0)					\
+			      : "r" (__scnum), "r" (__sc1), "r" (__sc2));	\
+	__syscall_return(type, __sc0);						\
+}
+
+#undef _syscall4
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4)		\
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4)				\
+{											\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);			\
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;		\
+	register unsigned long __sc1 __asm__ ("gr9") = (unsigned long) arg2;		\
+	register unsigned long __sc2 __asm__ ("gr10") = (unsigned long) arg3;		\
+	register unsigned long __sc3 __asm__ ("gr11") = (unsigned long) arg4;		\
+	__asm__ __volatile__ ("tira gr0,#0"						\
+			      : "+r" (__sc0)						\
+			      : "r" (__scnum), "r" (__sc1), "r" (__sc2), "r" (__sc3));	\
+	__syscall_return(type, __sc0);							\
+}
+
+#undef _syscall5
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5)	\
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5)			\
+{											\
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);			\
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;		\
+	register unsigned long __sc1 __asm__ ("gr9") = (unsigned long) arg2;		\
+	register unsigned long __sc2 __asm__ ("gr10") = (unsigned long) arg3;		\
+	register unsigned long __sc3 __asm__ ("gr11") = (unsigned long) arg4;		\
+	register unsigned long __sc4 __asm__ ("gr12") = (unsigned long) arg5;		\
+	__asm__ __volatile__ ("tira gr0,#0"						\
+			      : "+r" (__sc0)						\
+			      : "r" (__scnum), "r" (__sc1), "r" (__sc2),		\
+			      "r" (__sc3), "r" (__sc4));				\
+	__syscall_return(type, __sc0);							\
+}
+
+#undef _syscall6
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5, type6, arg6) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6)		 \
+{												 \
+	register unsigned long __scnum __asm__ ("gr7") = (__NR_##name);				 \
+	register unsigned long __sc0 __asm__ ("gr8") = (unsigned long) arg1;			 \
+	register unsigned long __sc1 __asm__ ("gr9") = (unsigned long) arg2;			 \
+	register unsigned long __sc2 __asm__ ("gr10") = (unsigned long) arg3;			 \
+	register unsigned long __sc3 __asm__ ("gr11") = (unsigned long) arg4;			 \
+	register unsigned long __sc4 __asm__ ("gr12") = (unsigned long) arg5;			 \
+	register unsigned long __sc5 __asm__ ("gr13") = (unsigned long) arg6;			 \
+	__asm__ __volatile__ ("tira gr0,#0"							 \
+			      : "+r" (__sc0)							 \
+			      : "r" (__scnum), "r" (__sc1), "r" (__sc2),			 \
+			      "r" (__sc3), "r" (__sc4), "r" (__sc5));				 \
+	__syscall_return(type, __sc0);								 \
+}
+
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(int,pause)
+static inline _syscall0(int,sync)
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall1(int,_exit,int,exitcode)
+static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static inline _syscall1(int,delete_module,const char *,name)
+
+static inline pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+
+#endif
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+/* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_PAUSE
+/* #define __ARCH_WANT_SYS_SGETMASK */
+/* #define __ARCH_WANT_SYS_SIGNAL */
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+/* #define __ARCH_WANT_SYS_SIGPENDING */
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* _ASM_UNISTD_H_ */
diff --git a/include/asm-frv/user.h b/include/asm-frv/user.h
new file mode 100644
index 000000000000..82fa8fab64ae
--- /dev/null
+++ b/include/asm-frv/user.h
@@ -0,0 +1,80 @@
+/* user.h: FR-V core file format stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/registers.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the 'trad-core' bfd).  There are quite a number of
+ * obstacles to being able to view the contents of the floating point
+ * registers, and until these are solved you will not be able to view
+ * the contents of them.  Actually, you can read in the core file and
+ * look at the contents of the user struct to find out what the
+ * floating point registers contain.
+ *
+ * The actual file contents are as follows:
+ * UPAGE:
+ *   1 page consisting of a user struct that tells gdb what is present
+ *   in the file.  Directly after this is a copy of the task_struct,
+ *   which is currently not used by gdb, but it may come in useful at
+ *   some point.  All of the registers are stored as part of the
+ *   upage.  The upage should always be only one page.
+ *
+ * DATA:
+ *   The data area is stored.  We use current->end_text to
+ *   current->brk to pick up all of the user variables, plus any
+ *   memory that may have been malloced.  No attempt is made to
+ *   determine if a page is demand-zero or if a page is totally
+ *   unused, we just cover the entire range.  All of the addresses are
+ *   rounded in such a way that an integral number of pages is
+ *   written.
+ *
+ * STACK:
+ *   We need the stack information in order to get a meaningful
+ *   backtrace.  We need to write the data from (esp) to
+ *   current->start_stack, so we round each of these off in order to
+ *   be able to write an integer number of pages.  The minimum core
+ *   file size is 3 pages, or 12288 bytes.
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ * this will be used by gdb to figure out where the data and stack segments
+ *  are within the file, and what virtual addresses to use.
+ */
+struct user {
+	/* We start with the registers, to mimic the way that "memory" is returned
+	 * from the ptrace(3,...) function.  */
+	struct user_context	regs;
+
+	/* The rest of this junk is to help gdb figure out what goes where */
+	unsigned long		u_tsize;	/* Text segment size (pages). */
+	unsigned long		u_dsize;	/* Data segment size (pages). */
+	unsigned long		u_ssize;	/* Stack segment size (pages). */
+	unsigned long		start_code;     /* Starting virtual address of text. */
+	unsigned long		start_stack;	/* Starting virtual address of stack area.
+						 * This is actually the bottom of the stack,
+						 * the top of the stack is always found in the
+						 * esp register.  */
+	long int		signal;		/* Signal that caused the core dump. */
+
+	unsigned long		magic;		/* To uniquely identify a core file */
+	char			u_comm[32];	/* User command that was responsible */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/include/asm-frv/virtconvert.h b/include/asm-frv/virtconvert.h
new file mode 100644
index 000000000000..a29a0aec291f
--- /dev/null
+++ b/include/asm-frv/virtconvert.h
@@ -0,0 +1,42 @@
+/* virtconvert.h: virtual/physical/page address convertion
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_VIRTCONVERT_H
+#define _ASM_VIRTCONVERT_H
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_MMU
+
+#define phys_to_virt(vaddr)	((void *) ((unsigned long)(vaddr) + PAGE_OFFSET))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr) - PAGE_OFFSET)
+
+#else
+
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#endif
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#define __page_address(page)	(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+
+#endif
+#endif
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
new file mode 100644
index 000000000000..c20ec257ecc0
--- /dev/null
+++ b/include/asm-generic/4level-fixup.h
@@ -0,0 +1,38 @@
+#ifndef _4LEVEL_FIXUP_H
+#define _4LEVEL_FIXUP_H
+
+#define __ARCH_HAS_4LEVEL_HACK
+#define __PAGETABLE_PUD_FOLDED
+
+#define PUD_SIZE			PGDIR_SIZE
+#define PUD_MASK			PGDIR_MASK
+#define PTRS_PER_PUD			1
+
+#define pud_t				pgd_t
+
+#define pmd_alloc(mm, pud, address)			\
+({	pmd_t *ret;					\
+	if (pgd_none(*pud))				\
+ 		ret = __pmd_alloc(mm, pud, address);	\
+ 	else						\
+		ret = pmd_offset(pud, address);		\
+ 	ret;						\
+})
+
+#define pud_alloc(mm, pgd, address)	(pgd)
+#define pud_offset(pgd, start)		(pgd)
+#define pud_none(pud)			0
+#define pud_bad(pud)			0
+#define pud_present(pud)		1
+#define pud_ERROR(pud)			do { } while (0)
+#define pud_clear(pud)			pgd_clear(pud)
+
+#undef pud_free_tlb
+#define pud_free_tlb(tlb, x)            do { } while (0)
+#define pud_free(x)			do { } while (0)
+#define __pud_free_tlb(tlb, x)		do { } while (0)
+
+#undef  pud_addr_end
+#define pud_addr_end(addr, end)		(end)
+
+#endif
diff --git a/include/asm-generic/bitops.h b/include/asm-generic/bitops.h
new file mode 100644
index 000000000000..ce31b739fd80
--- /dev/null
+++ b/include/asm-generic/bitops.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_GENERIC_BITOPS_H_
+#define _ASM_GENERIC_BITOPS_H_
+
+/*
+ * For the benefit of those who are trying to port Linux to another
+ * architecture, here are some C-language equivalents.  You should
+ * recode these in the native assembly language, if at all possible.
+ * To guarantee atomicity, these routines call cli() and sti() to
+ * disable interrupts while they operate.  (You have to provide inline
+ * routines to cli() and sti().)
+ *
+ * Also note, these routines assume that you have 32 bit longs.
+ * You will have to change this if you are trying to port Linux to the
+ * Alpha architecture or to a Cray.  :-)
+ * 
+ * C language equivalents written by Theodore Ts'o, 9/26/92
+ */
+
+extern __inline__ int set_bit(int nr,long * addr)
+{
+	int	mask, retval;
+
+	addr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	cli();
+	retval = (mask & *addr) != 0;
+	*addr |= mask;
+	sti();
+	return retval;
+}
+
+extern __inline__ int clear_bit(int nr, long * addr)
+{
+	int	mask, retval;
+
+	addr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	cli();
+	retval = (mask & *addr) != 0;
+	*addr &= ~mask;
+	sti();
+	return retval;
+}
+
+extern __inline__ int test_bit(int nr, const unsigned long * addr)
+{
+	int	mask;
+
+	addr += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *addr) != 0);
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_BITOPS_H */
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
new file mode 100644
index 000000000000..e5913c3b715a
--- /dev/null
+++ b/include/asm-generic/bug.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_GENERIC_BUG_H
+#define _ASM_GENERIC_BUG_H
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+
+#ifndef HAVE_ARCH_BUG
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	panic("BUG!"); \
+} while (0)
+#endif
+
+#ifndef HAVE_ARCH_PAGE_BUG
+#define PAGE_BUG(page) do { \
+	printk("page BUG for page at %p\n", page); \
+	BUG(); \
+} while (0)
+#endif
+
+#ifndef HAVE_ARCH_BUG_ON
+#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
+#endif
+
+#ifndef HAVE_ARCH_WARN_ON
+#define WARN_ON(condition) do { \
+	if (unlikely((condition)!=0)) { \
+		printk("Badness in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \
+		dump_stack(); \
+	} \
+} while (0)
+#endif
+
+#endif
diff --git a/include/asm-generic/cputime.h b/include/asm-generic/cputime.h
new file mode 100644
index 000000000000..6f178563e336
--- /dev/null
+++ b/include/asm-generic/cputime.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_GENERIC_CPUTIME_H
+#define _ASM_GENERIC_CPUTIME_H
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+
+typedef unsigned long cputime_t;
+
+#define cputime_zero			(0UL)
+#define cputime_max			((~0UL >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+#define cputime_to_jiffies(__ct)	(__ct)
+#define jiffies_to_cputime(__hz)	(__hz)
+
+typedef u64 cputime64_t;
+
+#define cputime64_zero (0ULL)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_to_jiffies64(__ct)	(__ct)
+#define cputime_to_cputime64(__ct)	((u64) __ct)
+
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+#define cputime_to_msecs(__ct)		jiffies_to_msecs(__ct)
+#define msecs_to_cputime(__msecs)	msecs_to_jiffies(__msecs)
+
+/*
+ * Convert cputime to seconds and back.
+ */
+#define cputime_to_secs(jif)		((jif) / HZ)
+#define secs_to_cputime(sec)		((sec) * HZ)
+
+/*
+ * Convert cputime to timespec and back.
+ */
+#define timespec_to_cputime(__val)	timespec_to_jiffies(__val)
+#define cputime_to_timespec(__ct,__val)	jiffies_to_timespec(__ct,__val)
+
+/*
+ * Convert cputime to timeval and back.
+ */
+#define timeval_to_cputime(__val)	timeval_to_jiffies(__val)
+#define cputime_to_timeval(__ct,__val)	jiffies_to_timeval(__ct,__val)
+
+/*
+ * Convert cputime to clock and back.
+ */
+#define cputime_to_clock_t(__ct)	jiffies_to_clock_t(__ct)
+#define clock_t_to_cputime(__x)		clock_t_to_jiffies(__x)
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct)	jiffies_64_to_clock_t(__ct)
+
+#endif
diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h
new file mode 100644
index 000000000000..8f4e3193342e
--- /dev/null
+++ b/include/asm-generic/div64.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_GENERIC_DIV64_H
+#define _ASM_GENERIC_DIV64_H
+/*
+ * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
+ * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
+ *
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * NOTE: macro parameter n is evaluated multiple times,
+ *       beware of side effects!
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#if BITS_PER_LONG == 64
+
+# define do_div(n,base) ({					\
+	uint32_t __base = (base);				\
+	uint32_t __rem;						\
+	__rem = ((uint64_t)(n)) % __base;			\
+	(n) = ((uint64_t)(n)) / __base;				\
+	__rem;							\
+ })
+
+#elif BITS_PER_LONG == 32
+
+extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
+
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({				\
+	uint32_t __base = (base);			\
+	uint32_t __rem;					\
+	(void)(((typeof((n)) *)0) == ((uint64_t *)0));	\
+	if (likely(((n) >> 32) == 0)) {			\
+		__rem = (uint32_t)(n) % __base;		\
+		(n) = (uint32_t)(n) / __base;		\
+	} else 						\
+		__rem = __div64_32(&(n), __base);	\
+	__rem;						\
+ })
+
+#else /* BITS_PER_LONG == ?? */
+
+# error do_div() does not yet support the C64
+
+#endif /* BITS_PER_LONG */
+
+#endif /* _ASM_GENERIC_DIV64_H */
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
new file mode 100644
index 000000000000..fd9de9502dff
--- /dev/null
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_GENERIC_DMA_MAPPING_H
+#define _ASM_GENERIC_DMA_MAPPING_H
+
+/* This is used for archs that do not support DMA */
+
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   int flag)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+#endif /* _ASM_GENERIC_DMA_MAPPING_H */
diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h
new file mode 100644
index 000000000000..8cef663c5cd9
--- /dev/null
+++ b/include/asm-generic/dma-mapping.h
@@ -0,0 +1,309 @@
+/* Copyright (C) 2002 by James.Bottomley@HansenPartnership.com 
+ *
+ * Implements the generic device dma API via the existing pci_ one
+ * for unconverted architectures
+ */
+
+#ifndef _ASM_GENERIC_DMA_MAPPING_H
+#define _ASM_GENERIC_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+
+/* we implement the API below in terms of the existing PCI one,
+ * so include it */
+#include <linux/pci.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_dma_supported(to_pci_dev(dev), mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   unsigned int __nocast flag)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+				    size, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+				       size, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+	return pci_dma_mapping_error(dma_addr);
+}
+
+
+#else
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	return 0;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG();
+	return 0;
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   unsigned int __nocast flag)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+#endif
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d)	(1)
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << L1_CACHE_SHIFT_MAX);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
+}
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	/* could define this in terms of the dma_cache ... operations,
+	 * but if you get this on a platform, you should convert the platform
+	 * to using the generic device DMA API */
+	BUG();
+}
+
+#endif
+
diff --git a/include/asm-generic/errno-base.h b/include/asm-generic/errno-base.h
new file mode 100644
index 000000000000..65115978510f
--- /dev/null
+++ b/include/asm-generic/errno-base.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_GENERIC_ERRNO_BASE_H
+#define _ASM_GENERIC_ERRNO_BASE_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+
+#endif
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h
new file mode 100644
index 000000000000..4dd2384bc38d
--- /dev/null
+++ b/include/asm-generic/errno.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_GENERIC_ERRNO_H
+#define _ASM_GENERIC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+#define	ECANCELED	125	/* Operation Canceled */
+#define	ENOKEY		126	/* Required key not available */
+#define	EKEYEXPIRED	127	/* Key has expired */
+#define	EKEYREVOKED	128	/* Key has been revoked */
+#define	EKEYREJECTED	129	/* Key was rejected by service */
+
+#endif
diff --git a/include/asm-generic/hdreg.h b/include/asm-generic/hdreg.h
new file mode 100644
index 000000000000..7051fba8bcf9
--- /dev/null
+++ b/include/asm-generic/hdreg.h
@@ -0,0 +1,8 @@
+#warning <asm/hdreg.h> is obsolete, please do not use it
+
+#ifndef __ASM_GENERIC_HDREG_H
+#define __ASM_GENERIC_HDREG_H
+
+typedef unsigned long ide_ioreg_t;
+
+#endif /* __ASM_GENERIC_HDREG_H */
diff --git a/include/asm-generic/ide_iops.h b/include/asm-generic/ide_iops.h
new file mode 100644
index 000000000000..1b91d0681914
--- /dev/null
+++ b/include/asm-generic/ide_iops.h
@@ -0,0 +1,38 @@
+/* Generic I/O and MEMIO string operations.  */
+
+#define __ide_insw	insw
+#define __ide_insl	insl
+#define __ide_outsw	outsw
+#define __ide_outsl	outsl
+
+static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u16 *)addr = readw(port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u32 *)addr = readl(port);
+		addr += 4;
+	}
+}
+
+static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		writew(*(u16 *)addr, port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+	while (count--) {
+		writel(*(u32 *)addr, port);
+		addr += 4;
+	}
+}
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
new file mode 100644
index 000000000000..4991543d44c8
--- /dev/null
+++ b/include/asm-generic/iomap.h
@@ -0,0 +1,63 @@
+#ifndef __GENERIC_IO_H
+#define __GENERIC_IO_H
+
+#include <linux/linkage.h>
+
+/*
+ * These are the "generic" interfaces for doing new-style
+ * memory-mapped or PIO accesses. Architectures may do
+ * their own arch-optimized versions, these just act as
+ * wrappers around the old-style IO register access functions:
+ * read[bwl]/write[bwl]/in[bwl]/out[bwl]
+ *
+ * Don't include this directly, include it from <asm/io.h>.
+ */
+
+/*
+ * Read/write from/to an (offsettable) iomem cookie. It might be a PIO
+ * access or a MMIO access, these functions don't care. The info is
+ * encoded in the hardware mapping set up by the mapping functions
+ * (or the cookie itself, depending on implementation and hw).
+ *
+ * The generic routines just encode the PIO/MMIO as part of the
+ * cookie, and coldly assume that the MMIO IO mappings are not
+ * in the low address range. Architectures for which this is not
+ * true can't use this generic implementation.
+ */
+extern unsigned int fastcall ioread8(void __iomem *);
+extern unsigned int fastcall ioread16(void __iomem *);
+extern unsigned int fastcall ioread32(void __iomem *);
+
+extern void fastcall iowrite8(u8, void __iomem *);
+extern void fastcall iowrite16(u16, void __iomem *);
+extern void fastcall iowrite32(u32, void __iomem *);
+
+/*
+ * "string" versions of the above. Note that they
+ * use native byte ordering for the accesses (on
+ * the assumption that IO and memory agree on a
+ * byte order, and CPU byteorder is irrelevant).
+ *
+ * They do _not_ update the port address. If you
+ * want MMIO that copies stuff laid out in MMIO
+ * memory across multiple ports, use "memcpy_toio()"
+ * and friends.
+ */
+extern void fastcall ioread8_rep(void __iomem *port, void *buf, unsigned long count);
+extern void fastcall ioread16_rep(void __iomem *port, void *buf, unsigned long count);
+extern void fastcall ioread32_rep(void __iomem *port, void *buf, unsigned long count);
+
+extern void fastcall iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void fastcall iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void fastcall iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+#endif
diff --git a/include/asm-generic/ipc.h b/include/asm-generic/ipc.h
new file mode 100644
index 000000000000..a40407a165ce
--- /dev/null
+++ b/include/asm-generic/ipc.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_GENERIC_IPC_H
+#define _ASM_GENERIC_IPC_H
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+	struct msgbuf __user *msgp;
+	long msgtyp;
+};
+
+#define SEMOP		 1
+#define SEMGET		 2
+#define SEMCTL		 3
+#define SEMTIMEDOP	 4
+#define MSGSND		11
+#define MSGRCV		12
+#define MSGGET		13
+#define MSGCTL		14
+#define SHMAT		21
+#define SHMDT		22
+#define SHMGET		23
+#define SHMCTL		24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC            25
+
+#define IPCCALL(version,op)	((version)<<16 | (op))
+
+#endif	/* _ASM_GENERIC_IPC_H */
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
new file mode 100644
index 000000000000..16fc00360f75
--- /dev/null
+++ b/include/asm-generic/local.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_GENERIC_LOCAL_H
+#define _ASM_GENERIC_LOCAL_H
+
+#include <linux/config.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/types.h>
+
+/* An unsigned long type for operations which are atomic for a single
+ * CPU.  Usually used in combination with per-cpu variables. */
+
+#if BITS_PER_LONG == 32
+/* Implement in terms of atomics. */
+
+/* Don't use typedef: don't want them to be mixed with atomic_t's. */
+typedef struct
+{
+	atomic_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_INIT(i) }
+
+#define local_read(l)	((unsigned long)atomic_read(&(l)->a))
+#define local_set(l,i)	atomic_set((&(l)->a),(i))
+#define local_inc(l)	atomic_inc(&(l)->a)
+#define local_dec(l)	atomic_dec(&(l)->a)
+#define local_add(i,l)	atomic_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_sub((i),(&(l)->a))
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local_inc(l)		local_set((l), local_read(l) + 1)
+#define __local_dec(l)		local_set((l), local_read(l) - 1)
+#define __local_add(i,l)	local_set((l), local_read(l) + (i))
+#define __local_sub(i,l)	local_set((l), local_read(l) - (i))
+
+#else /* ... can't use atomics. */
+/* Implement in terms of three variables.
+   Another option would be to use local_irq_save/restore. */
+
+typedef struct
+{
+	/* 0 = in hardirq, 1 = in softirq, 2 = usermode. */
+	unsigned long v[3];
+} local_t;
+
+#define _LOCAL_VAR(l)	((l)->v[!in_interrupt() + !in_irq()])
+
+#define LOCAL_INIT(i)	{ { (i), 0, 0 } }
+
+static inline unsigned long local_read(local_t *l)
+{
+	return l->v[0] + l->v[1] + l->v[2];
+}
+
+static inline void local_set(local_t *l, unsigned long v)
+{
+	l->v[0] = v;
+	l->v[1] = l->v[2] = 0;
+}
+
+static inline void local_inc(local_t *l)
+{
+	preempt_disable();
+	_LOCAL_VAR(l)++;
+	preempt_enable();
+}
+
+static inline void local_dec(local_t *l)
+{
+	preempt_disable();
+	_LOCAL_VAR(l)--;
+	preempt_enable();
+}
+
+static inline void local_add(unsigned long v, local_t *l)
+{
+	preempt_disable();
+	_LOCAL_VAR(l) += v;
+	preempt_enable();
+}
+
+static inline void local_sub(unsigned long v, local_t *l)
+{
+	preempt_disable();
+	_LOCAL_VAR(l) -= v;
+	preempt_enable();
+}
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local_inc(l)		((l)->v[0]++)
+#define __local_dec(l)		((l)->v[0]--)
+#define __local_add(i,l)	((l)->v[0] += (i))
+#define __local_sub(i,l)	((l)->v[0] -= (i))
+
+#endif /* Non-atomic implementation */
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable (eg. mystruct.foo), not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+/* Non-atomic increments, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well.
+ */
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ASM_GENERIC_LOCAL_H */
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
new file mode 100644
index 000000000000..25c10e96b2b7
--- /dev/null
+++ b/include/asm-generic/pci-dma-compat.h
@@ -0,0 +1,107 @@
+/* include this file if the platform implements the dma_ DMA Mapping API
+ * and wants to provide the pci_ DMA Mapping API in terms of it */
+
+#ifndef _ASM_GENERIC_PCI_DMA_COMPAT_H
+#define _ASM_GENERIC_PCI_DMA_COMPAT_H
+
+#include <linux/dma-mapping.h>
+
+/* note pci_set_dma_mask isn't here, since it's a public function
+ * exported from drivers/pci, use dma_supported instead */
+
+static inline int
+pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return dma_supported(hwdev == NULL ? NULL : &hwdev->dev, mask);
+}
+
+static inline void *
+pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+		     dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void
+pci_free_consistent(struct pci_dev *hwdev, size_t size,
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t
+pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
+{
+	return dma_map_single(hwdev == NULL ? NULL : &hwdev->dev, ptr, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+		 size_t size, int direction)
+{
+	dma_unmap_single(hwdev == NULL ? NULL : &hwdev->dev, dma_addr, size, (enum dma_data_direction)direction);
+}
+
+static inline dma_addr_t
+pci_map_page(struct pci_dev *hwdev, struct page *page,
+	     unsigned long offset, size_t size, int direction)
+{
+	return dma_map_page(hwdev == NULL ? NULL : &hwdev->dev, page, offset, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
+	       size_t size, int direction)
+{
+	dma_unmap_page(hwdev == NULL ? NULL : &hwdev->dev, dma_address, size, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+	   int nents, int direction)
+{
+	return dma_map_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+	     int nents, int direction)
+{
+	dma_unmap_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+		    size_t size, int direction)
+{
+	dma_sync_single_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+		    size_t size, int direction)
+{
+	dma_sync_single_for_device(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nelems, int direction)
+{
+	dma_sync_sg_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nelems, int direction)
+{
+	dma_sync_sg_for_device(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return dma_mapping_error(dma_addr);
+}
+
+#endif
diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
new file mode 100644
index 000000000000..9d4cc47bde39
--- /dev/null
+++ b/include/asm-generic/pci.h
@@ -0,0 +1,34 @@
+/*
+ * linux/include/asm-generic/pci.h
+ *
+ *  Copyright (C) 2003 Russell King
+ */
+#ifndef _ASM_GENERIC_PCI_H
+#define _ASM_GENERIC_PCI_H
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+static inline void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res)
+{
+	region->start = res->start;
+	region->end = res->end;
+}
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#ifndef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+#endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
+
+#endif
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
new file mode 100644
index 000000000000..3b709b84934f
--- /dev/null
+++ b/include/asm-generic/percpu.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_GENERIC_PERCPU_H_
+#define _ASM_GENERIC_PERCPU_H_
+#include <linux/compiler.h>
+
+#define __GENERIC_PER_CPU
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
+
+/* var is in discarded region: offset to particular copy we want */
+#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
+#define __get_cpu_var(var) per_cpu(var, smp_processor_id())
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size)			\
+do {								\
+	unsigned int __i;					\
+	for (__i = 0; __i < NR_CPUS; __i++)			\
+		if (cpu_possible(__i))				\
+			memcpy((pcpudst)+__per_cpu_offset[__i],	\
+			       (src), (size));			\
+} while (0)
+#else /* ! SMP */
+
+#define DEFINE_PER_CPU(type, name) \
+    __typeof__(type) per_cpu__##name
+
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var)			per_cpu__##var
+
+#endif	/* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+#endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
new file mode 100644
index 000000000000..c8d53ba20e19
--- /dev/null
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -0,0 +1,65 @@
+#ifndef _PGTABLE_NOPMD_H
+#define _PGTABLE_NOPMD_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/pgtable-nopud.h>
+
+#define __PAGETABLE_PMD_FOLDED
+
+/*
+ * Having the pmd type consist of a pud gets the size right, and allows
+ * us to conceptually access the pud entry that this pmd is folded into
+ * without casting.
+ */
+typedef struct { pud_t pud; } pmd_t;
+
+#define PMD_SHIFT	PUD_SHIFT
+#define PTRS_PER_PMD	1
+#define PMD_SIZE  	(1UL << PMD_SHIFT)
+#define PMD_MASK  	(~(PMD_SIZE-1))
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud)		{ return 0; }
+static inline int pud_bad(pud_t pud)		{ return 0; }
+static inline int pud_present(pud_t pud)	{ return 1; }
+static inline void pud_clear(pud_t *pud)	{ }
+#define pmd_ERROR(pmd)				(pud_ERROR((pmd).pud))
+
+#define pud_populate(mm, pmd, pte)		do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval)			set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
+{
+	return (pmd_t *)pud;
+}
+
+#define pmd_val(x)				(pud_val((x).pud))
+#define __pmd(x)				((pmd_t) { __pud(x) } )
+
+#define pud_page(pud)				(pmd_page((pmd_t){ pud }))
+#define pud_page_kernel(pud)			(pmd_page_kernel((pmd_t){ pud }))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pud, so has no extra memory associated with it.
+ */
+#define pmd_alloc_one(mm, address)		NULL
+#define pmd_free(x)				do { } while (0)
+#define __pmd_free_tlb(tlb, x)			do { } while (0)
+
+#undef  pmd_addr_end
+#define pmd_addr_end(addr, end)			(end)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PGTABLE_NOPMD_H */
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
new file mode 100644
index 000000000000..82e29f0ce467
--- /dev/null
+++ b/include/asm-generic/pgtable-nopud.h
@@ -0,0 +1,61 @@
+#ifndef _PGTABLE_NOPUD_H
+#define _PGTABLE_NOPUD_H
+
+#ifndef __ASSEMBLY__
+
+#define __PAGETABLE_PUD_FOLDED
+
+/*
+ * Having the pud type consist of a pgd gets the size right, and allows
+ * us to conceptually access the pgd entry that this pud is folded into
+ * without casting.
+ */
+typedef struct { pgd_t pgd; } pud_t;
+
+#define PUD_SHIFT	PGDIR_SHIFT
+#define PTRS_PER_PUD	1
+#define PUD_SIZE  	(1UL << PUD_SHIFT)
+#define PUD_MASK  	(~(PUD_SIZE-1))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t *pgd)	{ }
+#define pud_ERROR(pud)				(pgd_ERROR((pud).pgd))
+
+#define pgd_populate(mm, pgd, pud)		do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval)			set_pud((pud_t *)(pgdptr), (pud_t) { pgdval })
+
+static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address)
+{
+	return (pud_t *)pgd;
+}
+
+#define pud_val(x)				(pgd_val((x).pgd))
+#define __pud(x)				((pud_t) { __pgd(x) } )
+
+#define pgd_page(pgd)				(pud_page((pud_t){ pgd }))
+#define pgd_page_kernel(pgd)			(pud_page_kernel((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address)		NULL
+#define pud_free(x)				do { } while (0)
+#define __pud_free_tlb(tlb, x)			do { } while (0)
+
+#undef  pud_addr_end
+#define pud_addr_end(addr, end)			(end)
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PGTABLE_NOPUD_H */
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
new file mode 100644
index 000000000000..a3b28710d56c
--- /dev/null
+++ b/include/asm-generic/pgtable.h
@@ -0,0 +1,213 @@
+#ifndef _ASM_GENERIC_PGTABLE_H
+#define _ASM_GENERIC_PGTABLE_H
+
+#ifndef __HAVE_ARCH_PTEP_ESTABLISH
+/*
+ * Establish a new mapping:
+ *  - flush the old one
+ *  - update the page tables
+ *  - inform the TLB about the new one
+ *
+ * We hold the mm semaphore for reading and vma->vm_mm->page_table_lock.
+ *
+ * Note: the old pte is known to not be writable, so we don't need to
+ * worry about dirty bits etc getting lost.
+ */
+#ifndef __HAVE_ARCH_SET_PTE_ATOMIC
+#define ptep_establish(__vma, __address, __ptep, __entry)		\
+do {				  					\
+	set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry);	\
+	flush_tlb_page(__vma, __address);				\
+} while (0)
+#else /* __HAVE_ARCH_SET_PTE_ATOMIC */
+#define ptep_establish(__vma, __address, __ptep, __entry)		\
+do {				  					\
+	set_pte_atomic(__ptep, __entry);				\
+	flush_tlb_page(__vma, __address);				\
+} while (0)
+#endif /* __HAVE_ARCH_SET_PTE_ATOMIC */
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Largely same as above, but only sets the access flags (dirty,
+ * accessed, and writable). Furthermore, we know it always gets set
+ * to a "more permissive" setting, which allows most architectures
+ * to optimize this.
+ */
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+do {				  					  \
+	set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry);	  \
+	flush_tlb_page(__vma, __address);				  \
+} while (0)
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __address, __ptep)		\
+({									\
+	pte_t __pte = *(__ptep);					\
+	int r = 1;							\
+	if (!pte_young(__pte))						\
+		r = 0;							\
+	else								\
+		set_pte_at((__vma)->vm_mm, (__address),			\
+			   (__ptep), pte_mkold(__pte));			\
+	r;								\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young;							\
+	__young = ptep_test_and_clear_young(__vma, __address, __ptep);	\
+	if (__young)							\
+		flush_tlb_page(__vma, __address);			\
+	__young;							\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define ptep_test_and_clear_dirty(__vma, __address, __ptep)		\
+({									\
+	pte_t __pte = *__ptep;						\
+	int r = 1;							\
+	if (!pte_dirty(__pte))						\
+		r = 0;							\
+	else								\
+		set_pte_at((__vma)->vm_mm, (__address), (__ptep),	\
+			   pte_mkclean(__pte));				\
+	r;								\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
+#define ptep_clear_flush_dirty(__vma, __address, __ptep)		\
+({									\
+	int __dirty;							\
+	__dirty = ptep_test_and_clear_dirty(__vma, __address, __ptep);	\
+	if (__dirty)							\
+		flush_tlb_page(__vma, __address);			\
+	__dirty;							\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define ptep_get_and_clear(__mm, __address, __ptep)			\
+({									\
+	pte_t __pte = *(__ptep);					\
+	pte_clear((__mm), (__address), (__ptep));			\
+	__pte;								\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
+#define ptep_clear_flush(__vma, __address, __ptep)			\
+({									\
+	pte_t __pte;							\
+	__pte = ptep_get_and_clear((__vma)->vm_mm, __address, __ptep);	\
+	flush_tlb_page(__vma, __address);				\
+	__pte;								\
+})
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
+{
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, address, ptep, pte_wrprotect(old_pte));
+}
+#endif
+
+#ifndef __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(pte_val(A) == pte_val(B))
+#endif
+
+#ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY
+#define page_test_and_clear_dirty(page) (0)
+#endif
+
+#ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
+#define page_test_and_clear_young(page) (0)
+#endif
+
+#ifndef __HAVE_ARCH_PGD_OFFSET_GATE
+#define pgd_offset_gate(mm, addr)	pgd_offset(mm, addr)
+#endif
+
+#ifndef __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+#define lazy_mmu_prot_update(pte)	do { } while (0)
+#endif
+
+/*
+ * When walking page tables, get the address of the next boundary, or
+ * the end address of the range if that comes earlier.  Although end might
+ * wrap to 0 only in clear_page_range, __boundary may wrap to 0 throughout.
+ */
+
+#ifndef pgd_addr_end
+#define pgd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+#endif
+
+#ifndef pud_addr_end
+#define pud_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PUD_SIZE) & PUD_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+#endif
+
+#ifndef pmd_addr_end
+#define pmd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * When walking page tables, we usually want to skip any p?d_none entries;
+ * and any p?d_bad entries - reporting the error before resetting to none.
+ * Do the tests inline, but report and clear the bad entry in mm/memory.c.
+ */
+void pgd_clear_bad(pgd_t *);
+void pud_clear_bad(pud_t *);
+void pmd_clear_bad(pmd_t *);
+
+static inline int pgd_none_or_clear_bad(pgd_t *pgd)
+{
+	if (pgd_none(*pgd))
+		return 1;
+	if (unlikely(pgd_bad(*pgd))) {
+		pgd_clear_bad(pgd);
+		return 1;
+	}
+	return 0;
+}
+
+static inline int pud_none_or_clear_bad(pud_t *pud)
+{
+	if (pud_none(*pud))
+		return 1;
+	if (unlikely(pud_bad(*pud))) {
+		pud_clear_bad(pud);
+		return 1;
+	}
+	return 0;
+}
+
+static inline int pmd_none_or_clear_bad(pmd_t *pmd)
+{
+	if (pmd_none(*pmd))
+		return 1;
+	if (unlikely(pmd_bad(*pmd))) {
+		pmd_clear_bad(pmd);
+		return 1;
+	}
+	return 0;
+}
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_GENERIC_PGTABLE_H */
diff --git a/include/asm-generic/resource.h b/include/asm-generic/resource.h
new file mode 100644
index 000000000000..b1fcda9eac23
--- /dev/null
+++ b/include/asm-generic/resource.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_GENERIC_RESOURCE_H
+#define _ASM_GENERIC_RESOURCE_H
+
+/*
+ * Resource limit IDs
+ *
+ * ( Compatibility detail: there are architectures that have
+ *   a different rlimit ID order in the 5-9 range and want
+ *   to keep that order for binary compatibility. The reasons
+ *   are historic and all new rlimits are identical across all
+ *   arches. If an arch has such special order for some rlimits
+ *   then it defines them prior including asm-generic/resource.h. )
+ */
+
+#define RLIMIT_CPU		0	/* CPU time in ms */
+#define RLIMIT_FSIZE		1	/* Maximum filesize */
+#define RLIMIT_DATA		2	/* max data size */
+#define RLIMIT_STACK		3	/* max stack size */
+#define RLIMIT_CORE		4	/* max core file size */
+
+#ifndef RLIMIT_RSS
+# define RLIMIT_RSS		5	/* max resident set size */
+#endif
+
+#ifndef RLIMIT_NPROC
+# define RLIMIT_NPROC		6	/* max number of processes */
+#endif
+
+#ifndef RLIMIT_NOFILE
+# define RLIMIT_NOFILE		7	/* max number of open files */
+#endif
+
+#ifndef RLIMIT_MEMLOCK
+# define RLIMIT_MEMLOCK		8	/* max locked-in-memory address space */
+#endif
+
+#ifndef RLIMIT_AS
+# define RLIMIT_AS		9	/* address space limit */
+#endif
+
+#define RLIMIT_LOCKS		10	/* maximum file locks held */
+#define RLIMIT_SIGPENDING	11	/* max number of pending signals */
+#define RLIMIT_MSGQUEUE		12	/* maximum bytes in POSIX mqueues */
+
+#define RLIM_NLIMITS		13
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway.
+ *
+ * Some architectures override this (for compatibility reasons):
+ */
+#ifndef RLIM_INFINITY
+# define RLIM_INFINITY		(~0UL)
+#endif
+
+/*
+ * RLIMIT_STACK default maximum - some architectures override it:
+ */
+#ifndef _STK_LIM_MAX
+# define _STK_LIM_MAX		RLIM_INFINITY
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * boot-time rlimit defaults for the init task:
+ */
+#define INIT_RLIMITS							\
+{									\
+	[RLIMIT_CPU]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_FSIZE]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_DATA]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_STACK]		= {       _STK_LIM,   _STK_LIM_MAX },	\
+	[RLIMIT_CORE]		= {              0,  RLIM_INFINITY },	\
+	[RLIMIT_RSS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_NPROC]		= {              0,              0 },	\
+	[RLIMIT_NOFILE]		= {       INR_OPEN,       INR_OPEN },	\
+	[RLIMIT_MEMLOCK]	= {    MLOCK_LIMIT,    MLOCK_LIMIT },	\
+	[RLIMIT_AS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_LOCKS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_SIGPENDING]	= { 		0,	       0 },	\
+	[RLIMIT_MSGQUEUE]	= {   MQ_BYTES_MAX,   MQ_BYTES_MAX },	\
+}
+
+#endif	/* __KERNEL__ */
+
+#endif
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
new file mode 100644
index 000000000000..cef08db34ada
--- /dev/null
+++ b/include/asm-generic/rtc.h
@@ -0,0 +1,213 @@
+/* 
+ * inclue/asm-generic/rtc.h
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * Based on:
+ * drivers/char/rtc.c
+ *
+ * Please read the COPYING file for all license details.
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/mc146818rtc.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char rtc_is_updating(void)
+{
+	unsigned char uip;
+
+	spin_lock_irq(&rtc_lock);
+	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irq(&rtc_lock);
+	return uip;
+}
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	unsigned long uip_watchdog = jiffies;
+	unsigned char ctrl;
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_year;
+#endif
+
+	/*
+	 * read RTC once any update in progress is done. The update
+	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+	 * If you need to know *exactly* when a second has started, enable
+	 * periodic update complete interrupts, (via ioctl) and then 
+	 * immediately read /dev/rtc which will block until you get the IRQ.
+	 * Once the read clears, read the RTC time (again via ioctl). Easy.
+	 */
+
+	if (rtc_is_updating() != 0)
+		while (jiffies - uip_watchdog < 2*HZ/100) {
+			barrier();
+			cpu_relax();
+		}
+
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	spin_lock_irq(&rtc_lock);
+	time->tm_sec = CMOS_READ(RTC_SECONDS);
+	time->tm_min = CMOS_READ(RTC_MINUTES);
+	time->tm_hour = CMOS_READ(RTC_HOURS);
+	time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+	time->tm_mon = CMOS_READ(RTC_MONTH);
+	time->tm_year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_MACH_DECSTATION
+	real_year = CMOS_READ(RTC_DEC_YEAR);
+#endif
+	ctrl = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	{
+		BCD_TO_BIN(time->tm_sec);
+		BCD_TO_BIN(time->tm_min);
+		BCD_TO_BIN(time->tm_hour);
+		BCD_TO_BIN(time->tm_mday);
+		BCD_TO_BIN(time->tm_mon);
+		BCD_TO_BIN(time->tm_year);
+	}
+
+#ifdef CONFIG_MACH_DECSTATION
+	time->tm_year += real_year - 72;
+#endif
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	if (time->tm_year <= 69)
+		time->tm_year += 100;
+
+	time->tm_mon--;
+
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	unsigned char mon, day, hrs, min, sec;
+	unsigned char save_control, save_freq_select;
+	unsigned int yrs;
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_yrs, leap_yr;
+#endif
+
+	yrs = time->tm_year;
+	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
+	day = time->tm_mday;
+	hrs = time->tm_hour;
+	min = time->tm_min;
+	sec = time->tm_sec;
+
+	if (yrs > 255)	/* They are unsigned */
+		return -EINVAL;
+
+	spin_lock_irq(&rtc_lock);
+#ifdef CONFIG_MACH_DECSTATION
+	real_yrs = yrs;
+	leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
+			!((yrs + 1900) % 400));
+	yrs = 72;
+
+	/*
+	 * We want to keep the year set to 73 until March
+	 * for non-leap years, so that Feb, 29th is handled
+	 * correctly.
+	 */
+	if (!leap_yr && mon < 3) {
+		real_yrs--;
+		yrs = 73;
+	}
+#endif
+	/* These limits and adjustments are independent of
+	 * whether the chip is in binary mode or not.
+	 */
+	if (yrs > 169) {
+		spin_unlock_irq(&rtc_lock);
+		return -EINVAL;
+	}
+
+	if (yrs >= 100)
+		yrs -= 100;
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+	    || RTC_ALWAYS_BCD) {
+		BIN_TO_BCD(sec);
+		BIN_TO_BCD(min);
+		BIN_TO_BCD(hrs);
+		BIN_TO_BCD(day);
+		BIN_TO_BCD(mon);
+		BIN_TO_BCD(yrs);
+	}
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_MACH_DECSTATION
+	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
+#endif
+	CMOS_WRITE(yrs, RTC_YEAR);
+	CMOS_WRITE(mon, RTC_MONTH);
+	CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+	CMOS_WRITE(hrs, RTC_HOURS);
+	CMOS_WRITE(min, RTC_MINUTES);
+	CMOS_WRITE(sec, RTC_SECONDS);
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	spin_unlock_irq(&rtc_lock);
+
+	return 0;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
new file mode 100644
index 000000000000..976ac29598b7
--- /dev/null
+++ b/include/asm-generic/sections.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_GENERIC_SECTIONS_H_
+#define _ASM_GENERIC_SECTIONS_H_
+
+/* References to section boundaries */
+
+extern char _text[], _stext[], _etext[];
+extern char _data[], _sdata[], _edata[];
+extern char __bss_start[], __bss_stop[];
+extern char __init_begin[], __init_end[];
+extern char _sinittext[], _einittext[];
+extern char _end[];
+
+#endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
new file mode 100644
index 000000000000..9cac8e8dde51
--- /dev/null
+++ b/include/asm-generic/siginfo.h
@@ -0,0 +1,287 @@
+#ifndef _ASM_GENERIC_SIGINFO_H
+#define _ASM_GENERIC_SIGINFO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+typedef union sigval {
+	int sival_int;
+	void __user *sival_ptr;
+} sigval_t;
+
+/*
+ * This is the size (including padding) of the part of the
+ * struct siginfo that is before the union.
+ */
+#ifndef __ARCH_SI_PREAMBLE_SIZE
+#define __ARCH_SI_PREAMBLE_SIZE	(3 * sizeof(int))
+#endif
+
+#define SI_MAX_SIZE	128
+#ifndef SI_PAD_SIZE
+#define SI_PAD_SIZE	((SI_MAX_SIZE - __ARCH_SI_PREAMBLE_SIZE) / sizeof(int))
+#endif
+
+#ifndef __ARCH_SI_UID_T
+#define __ARCH_SI_UID_T	uid_t
+#endif
+
+/*
+ * The default "si_band" type is "long", as specified by POSIX.
+ * However, some architectures want to override this to "int"
+ * for historical compatibility reasons, so we allow that.
+ */
+#ifndef __ARCH_SI_BAND_T
+#define __ARCH_SI_BAND_T long
+#endif
+
+#ifndef HAVE_ARCH_SIGINFO_T
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#endif
+
+/*
+ * How these fields are to be accessed.
+ */
+#define si_pid		_sifields._kill._pid
+#define si_uid		_sifields._kill._uid
+#define si_tid		_sifields._timer._tid
+#define si_overrun	_sifields._timer._overrun
+#define si_sys_private  _sifields._timer._sys_private
+#define si_status	_sifields._sigchld._status
+#define si_utime	_sifields._sigchld._utime
+#define si_stime	_sifields._sigchld._stime
+#define si_value	_sifields._rt._sigval
+#define si_int		_sifields._rt._sigval.sival_int
+#define si_ptr		_sifields._rt._sigval.sival_ptr
+#define si_addr		_sifields._sigfault._addr
+#ifdef __ARCH_SI_TRAPNO
+#define si_trapno	_sifields._sigfault._trapno
+#endif
+#define si_band		_sifields._sigpoll._band
+#define si_fd		_sifields._sigpoll._fd
+
+#ifdef __KERNEL__
+#define __SI_MASK	0xffff0000u
+#define __SI_KILL	(0 << 16)
+#define __SI_TIMER	(1 << 16)
+#define __SI_POLL	(2 << 16)
+#define __SI_FAULT	(3 << 16)
+#define __SI_CHLD	(4 << 16)
+#define __SI_RT		(5 << 16)
+#define __SI_MESGQ	(6 << 16)
+#define __SI_CODE(T,N)	((T) | ((N) & 0xffff))
+#else
+#define __SI_KILL	0
+#define __SI_TIMER	0
+#define __SI_POLL	0
+#define __SI_FAULT	0
+#define __SI_CHLD	0
+#define __SI_RT		0
+#define __SI_MESGQ	0
+#define __SI_CODE(T,N)	(N)
+#endif
+
+/*
+ * si_code values
+ * Digital reserves positive values for kernel-generated signals.
+ */
+#define SI_USER		0		/* sent by kill, sigsend, raise */
+#define SI_KERNEL	0x80		/* sent by the kernel from somewhere */
+#define SI_QUEUE	-1		/* sent by sigqueue */
+#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ,-3) /* sent by real time mesq state change */
+#define SI_ASYNCIO	-4		/* sent by AIO completion */
+#define SI_SIGIO	-5		/* sent by queued SIGIO */
+#define SI_TKILL	-6		/* sent by tkill system call */
+#define SI_DETHREAD	-7		/* sent by execve() killing subsidiary threads */
+
+#define SI_FROMUSER(siptr)	((siptr)->si_code <= 0)
+#define SI_FROMKERNEL(siptr)	((siptr)->si_code > 0)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_ILLOPC	(__SI_FAULT|1)	/* illegal opcode */
+#define ILL_ILLOPN	(__SI_FAULT|2)	/* illegal operand */
+#define ILL_ILLADR	(__SI_FAULT|3)	/* illegal addressing mode */
+#define ILL_ILLTRP	(__SI_FAULT|4)	/* illegal trap */
+#define ILL_PRVOPC	(__SI_FAULT|5)	/* privileged opcode */
+#define ILL_PRVREG	(__SI_FAULT|6)	/* privileged register */
+#define ILL_COPROC	(__SI_FAULT|7)	/* coprocessor error */
+#define ILL_BADSTK	(__SI_FAULT|8)	/* internal stack error */
+#define NSIGILL		8
+
+/*
+ * SIGFPE si_codes
+ */
+#define FPE_INTDIV	(__SI_FAULT|1)	/* integer divide by zero */
+#define FPE_INTOVF	(__SI_FAULT|2)	/* integer overflow */
+#define FPE_FLTDIV	(__SI_FAULT|3)	/* floating point divide by zero */
+#define FPE_FLTOVF	(__SI_FAULT|4)	/* floating point overflow */
+#define FPE_FLTUND	(__SI_FAULT|5)	/* floating point underflow */
+#define FPE_FLTRES	(__SI_FAULT|6)	/* floating point inexact result */
+#define FPE_FLTINV	(__SI_FAULT|7)	/* floating point invalid operation */
+#define FPE_FLTSUB	(__SI_FAULT|8)	/* subscript out of range */
+#define NSIGFPE		8
+
+/*
+ * SIGSEGV si_codes
+ */
+#define SEGV_MAPERR	(__SI_FAULT|1)	/* address not mapped to object */
+#define SEGV_ACCERR	(__SI_FAULT|2)	/* invalid permissions for mapped object */
+#define NSIGSEGV	2
+
+/*
+ * SIGBUS si_codes
+ */
+#define BUS_ADRALN	(__SI_FAULT|1)	/* invalid address alignment */
+#define BUS_ADRERR	(__SI_FAULT|2)	/* non-existant physical address */
+#define BUS_OBJERR	(__SI_FAULT|3)	/* object specific hardware error */
+#define NSIGBUS		3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRKPT	(__SI_FAULT|1)	/* process breakpoint */
+#define TRAP_TRACE	(__SI_FAULT|2)	/* process trace trap */
+#define NSIGTRAP	2
+
+/*
+ * SIGCHLD si_codes
+ */
+#define CLD_EXITED	(__SI_CHLD|1)	/* child has exited */
+#define CLD_KILLED	(__SI_CHLD|2)	/* child was killed */
+#define CLD_DUMPED	(__SI_CHLD|3)	/* child terminated abnormally */
+#define CLD_TRAPPED	(__SI_CHLD|4)	/* traced child has trapped */
+#define CLD_STOPPED	(__SI_CHLD|5)	/* child has stopped */
+#define CLD_CONTINUED	(__SI_CHLD|6)	/* stopped child has continued */
+#define NSIGCHLD	6
+
+/*
+ * SIGPOLL si_codes
+ */
+#define POLL_IN		(__SI_POLL|1)	/* data input available */
+#define POLL_OUT	(__SI_POLL|2)	/* output buffers available */
+#define POLL_MSG	(__SI_POLL|3)	/* input message available */
+#define POLL_ERR	(__SI_POLL|4)	/* i/o error */
+#define POLL_PRI	(__SI_POLL|5)	/* high priority input available */
+#define POLL_HUP	(__SI_POLL|6)	/* device disconnected */
+#define NSIGPOLL	6
+
+/*
+ * sigevent definitions
+ * 
+ * It seems likely that SIGEV_THREAD will have to be handled from 
+ * userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
+ * thread manager then catches and does the appropriate nonsense.
+ * However, everything is written out here so as to not get lost.
+ */
+#define SIGEV_SIGNAL	0	/* notify via signal */
+#define SIGEV_NONE	1	/* other notification: meaningless */
+#define SIGEV_THREAD	2	/* deliver via thread creation */
+#define SIGEV_THREAD_ID 4	/* deliver to thread */
+
+#define SIGEV_MAX_SIZE	64
+#ifndef SIGEV_PAD_SIZE
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 3)
+#endif
+
+typedef struct sigevent {
+	sigval_t sigev_value;
+	int sigev_signo;
+	int sigev_notify;
+	union {
+		int _pad[SIGEV_PAD_SIZE];
+		 int _tid;
+
+		struct {
+			void (*_function)(sigval_t);
+			void *_attribute;	/* really pthread_attr_t */
+		} _sigev_thread;
+	} _sigev_un;
+} sigevent_t;
+
+#define sigev_notify_function	_sigev_un._sigev_thread._function
+#define sigev_notify_attributes	_sigev_un._sigev_thread._attribute
+#define sigev_notify_thread_id	 _sigev_un._tid
+
+#ifdef __KERNEL__
+
+struct siginfo;
+void do_schedule_next_timer(struct siginfo *info);
+
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+extern int copy_siginfo_to_user(struct siginfo __user *to, struct siginfo *from);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-generic/statfs.h b/include/asm-generic/statfs.h
new file mode 100644
index 000000000000..1d01043e797d
--- /dev/null
+++ b/include/asm-generic/statfs.h
@@ -0,0 +1,51 @@
+#ifndef _GENERIC_STATFS_H
+#define _GENERIC_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+struct statfs {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u32 f_blocks;
+	__u32 f_bfree;
+	__u32 f_bavail;
+	__u32 f_files;
+	__u32 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+struct statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h
new file mode 100644
index 000000000000..1e58ca39592c
--- /dev/null
+++ b/include/asm-generic/termios.h
@@ -0,0 +1,69 @@
+/* termios.h: generic termios/termio user copying/translation
+ */
+
+#ifndef _ASM_GENERIC_TERMIOS_H
+#define _ASM_GENERIC_TERMIOS_H
+
+#include <asm/uaccess.h>
+
+#ifndef __ARCH_TERMIO_GETPUT
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+static inline int user_termio_to_kernel_termios(struct termios *termios,
+						struct termio __user *termio)
+{
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct termios *termios)
+{
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __ARCH_TERMIO_GETPUT */
+
+#endif /* _ASM_GENERIC_TERMIOS_H */
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
new file mode 100644
index 000000000000..faff403e1061
--- /dev/null
+++ b/include/asm-generic/tlb.h
@@ -0,0 +1,160 @@
+/* asm-generic/tlb.h
+ *
+ *	Generic TLB shootdown code
+ *
+ * Copyright 2001 Red Hat, Inc.
+ * Based on code from mm/memory.c Copyright Linus Torvalds and others.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC__TLB_H
+#define _ASM_GENERIC__TLB_H
+
+#include <linux/config.h>
+#include <linux/swap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR	506
+  #define tlb_fast_mode(tlb) ((tlb)->nr == ~0U)
+#else
+  #define FREE_PTE_NR	1
+  #define tlb_fast_mode(tlb) 1
+#endif
+
+/* struct mmu_gather is an opaque type used by the mm code for passing around
+ * any data needed by arch specific code for tlb_remove_page.  This structure
+ * can be per-CPU or per-MM as the page table lock is held for the duration of
+ * TLB shootdown.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		nr;	/* set to ~0U means fast mode */
+	unsigned int		need_flush;/* Really unmapped some ptes? */
+	unsigned int		fullmm; /* non-zero means full mm flush */
+	unsigned long		freed;
+	struct page *		pages[FREE_PTE_NR];
+};
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/* tlb_gather_mmu
+ *	Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &per_cpu(mmu_gathers, smp_processor_id());
+
+	tlb->mm = mm;
+
+	/* Use fast mode if only one CPU is online */
+	tlb->nr = num_online_cpus() > 1 ? 0U : ~0U;
+
+	tlb->fullmm = full_mm_flush;
+	tlb->freed = 0;
+
+	return tlb;
+}
+
+static inline void
+tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (!tlb->need_flush)
+		return;
+	tlb->need_flush = 0;
+	tlb_flush(tlb);
+	if (!tlb_fast_mode(tlb)) {
+		free_pages_and_swap_cache(tlb->pages, tlb->nr);
+		tlb->nr = 0;
+	}
+}
+
+/* tlb_finish_mmu
+ *	Called at the end of the shootdown operation to free up any resources
+ *	that were required.  The page table lock is still held at this point.
+ */
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	int freed = tlb->freed;
+	struct mm_struct *mm = tlb->mm;
+	int rss = get_mm_counter(mm, rss);
+
+	if (rss < freed)
+		freed = rss;
+	add_mm_counter(mm, rss, -freed);
+	tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+	return tlb->fullmm;
+}
+
+/* tlb_remove_page
+ *	Must perform the equivalent to __free_pte(pte_get_and_clear(ptep)), while
+ *	handling the additional races in SMP caused by other CPUs caching valid
+ *	mappings in their TLBs.
+ */
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	tlb->pages[tlb->nr++] = page;
+	if (tlb->nr >= FREE_PTE_NR)
+		tlb_flush_mmu(tlb, 0, 0);
+}
+
+/**
+ * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
+ *
+ * Record the fact that pte's were really umapped in ->need_flush, so we can
+ * later optimise away the tlb invalidate.   This helps when userspace is
+ * unmapping already-unmapped pages, which happens quite a lot.
+ */
+#define tlb_remove_tlb_entry(tlb, ptep, address)		\
+	do {							\
+		tlb->need_flush = 1;				\
+		__tlb_remove_tlb_entry(tlb, ptep, address);	\
+	} while (0)
+
+#define pte_free_tlb(tlb, ptep)					\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pte_free_tlb(tlb, ptep);			\
+	} while (0)
+
+#ifndef __ARCH_HAS_4LEVEL_HACK
+#define pud_free_tlb(tlb, pudp)					\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pud_free_tlb(tlb, pudp);			\
+	} while (0)
+#endif
+
+#define pmd_free_tlb(tlb, pmdp)					\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pmd_free_tlb(tlb, pmdp);			\
+	} while (0)
+
+#define tlb_migrate_finish(mm) do {} while (0)
+
+#endif /* _ASM_GENERIC__TLB_H */
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
new file mode 100644
index 000000000000..ec96e8b0f190
--- /dev/null
+++ b/include/asm-generic/topology.h
@@ -0,0 +1,48 @@
+/*
+ * linux/include/asm-generic/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_GENERIC_TOPOLOGY_H
+#define _ASM_GENERIC_TOPOLOGY_H
+
+/* Other architectures wishing to use this simple topology API should fill
+   in the below functions as appropriate in their own <asm/topology.h> file. */
+#ifndef cpu_to_node
+#define cpu_to_node(cpu)	(0)
+#endif
+#ifndef parent_node
+#define parent_node(node)	(0)
+#endif
+#ifndef node_to_cpumask
+#define node_to_cpumask(node)	(cpu_online_map)
+#endif
+#ifndef node_to_first_cpu
+#define node_to_first_cpu(node)	(0)
+#endif
+#ifndef pcibus_to_cpumask
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+#endif
+
+#endif /* _ASM_GENERIC_TOPOLOGY_H */
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
new file mode 100644
index 000000000000..549cb3a1640a
--- /dev/null
+++ b/include/asm-generic/uaccess.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_GENERIC_UACCESS_H_
+#define _ASM_GENERIC_UACCESS_H_
+
+/*
+ * This macro should be used instead of __get_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __get_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x;					\
+	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
+	(x) = __x;							\
+})
+
+
+/*
+ * This macro should be used instead of __put_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __put_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x = (x);					\
+	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+})
+
+#endif /* _ASM_GENERIC_UACCESS_H */
diff --git a/include/asm-generic/unaligned.h b/include/asm-generic/unaligned.h
new file mode 100644
index 000000000000..c856a43e3b45
--- /dev/null
+++ b/include/asm-generic/unaligned.h
@@ -0,0 +1,121 @@
+#ifndef _ASM_GENERIC_UNALIGNED_H_
+#define _ASM_GENERIC_UNALIGNED_H_
+
+/*
+ * For the benefit of those who are trying to port Linux to another
+ * architecture, here are some C-language equivalents. 
+ *
+ * This is based almost entirely upon Richard Henderson's
+ * asm-alpha/unaligned.h implementation.  Some comments were
+ * taken from David Mosberger's asm-ia64/unaligned.h header.
+ */
+
+#include <linux/types.h>
+
+/* 
+ * The main single-value unaligned transfer routines.
+ */
+#define get_unaligned(ptr) \
+	((__typeof__(*(ptr)))__get_unaligned((ptr), sizeof(*(ptr))))
+#define put_unaligned(x,ptr) \
+	__put_unaligned((unsigned long)(x), (ptr), sizeof(*(ptr)))
+
+/*
+ * This function doesn't actually exist.  The idea is that when
+ * someone uses the macros below with an unsupported size (datatype),
+ * the linker will alert us to the problem via an unresolved reference
+ * error.
+ */
+extern void bad_unaligned_access_length(void) __attribute__((noreturn));
+
+struct __una_u64 { __u64 x __attribute__((packed)); };
+struct __una_u32 { __u32 x __attribute__((packed)); };
+struct __una_u16 { __u16 x __attribute__((packed)); };
+
+/*
+ * Elemental unaligned loads 
+ */
+
+static inline unsigned long __uldq(const __u64 *addr)
+{
+	const struct __una_u64 *ptr = (const struct __una_u64 *) addr;
+	return ptr->x;
+}
+
+static inline unsigned long __uldl(const __u32 *addr)
+{
+	const struct __una_u32 *ptr = (const struct __una_u32 *) addr;
+	return ptr->x;
+}
+
+static inline unsigned long __uldw(const __u16 *addr)
+{
+	const struct __una_u16 *ptr = (const struct __una_u16 *) addr;
+	return ptr->x;
+}
+
+/*
+ * Elemental unaligned stores 
+ */
+
+static inline void __ustq(__u64 val, __u64 *addr)
+{
+	struct __una_u64 *ptr = (struct __una_u64 *) addr;
+	ptr->x = val;
+}
+
+static inline void __ustl(__u32 val, __u32 *addr)
+{
+	struct __una_u32 *ptr = (struct __una_u32 *) addr;
+	ptr->x = val;
+}
+
+static inline void __ustw(__u16 val, __u16 *addr)
+{
+	struct __una_u16 *ptr = (struct __una_u16 *) addr;
+	ptr->x = val;
+}
+
+static inline unsigned long __get_unaligned(const void *ptr, size_t size)
+{
+	unsigned long val;
+	switch (size) {
+	case 1:
+		val = *(const __u8 *)ptr;
+		break;
+	case 2:
+		val = __uldw((const __u16 *)ptr);
+		break;
+	case 4:
+		val = __uldl((const __u32 *)ptr);
+		break;
+	case 8:
+		val = __uldq((const __u64 *)ptr);
+		break;
+	default:
+		bad_unaligned_access_length();
+	};
+	return val;
+}
+
+static inline void __put_unaligned(unsigned long val, void *ptr, size_t size)
+{
+	switch (size) {
+	case 1:
+		*(__u8 *)ptr = val;
+	        break;
+	case 2:
+		__ustw(val, (__u16 *)ptr);
+		break;
+	case 4:
+		__ustl(val, (__u32 *)ptr);
+		break;
+	case 8:
+		__ustq(val, (__u64 *)ptr);
+		break;
+	default:
+	    	bad_unaligned_access_length();
+	};
+}
+
+#endif /* _ASM_GENERIC_UNALIGNED_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
new file mode 100644
index 000000000000..99cef06a364a
--- /dev/null
+++ b/include/asm-generic/vmlinux.lds.h
@@ -0,0 +1,90 @@
+#ifndef LOAD_OFFSET
+#define LOAD_OFFSET 0
+#endif
+
+#ifndef VMLINUX_SYMBOL
+#define VMLINUX_SYMBOL(_sym_) _sym_
+#endif
+
+#define RODATA								\
+	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
+		*(.rodata) *(.rodata.*)					\
+		*(__vermagic)		/* Kernel version magic */	\
+	}								\
+									\
+	.rodata1          : AT(ADDR(.rodata1) - LOAD_OFFSET) {		\
+		*(.rodata1)						\
+	}								\
+									\
+	/* PCI quirks */						\
+	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start_pci_fixups_early) = .;		\
+		*(.pci_fixup_early)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_early) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_header) = .;		\
+		*(.pci_fixup_header)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_header) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_final) = .;		\
+		*(.pci_fixup_final)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_final) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_enable) = .;		\
+		*(.pci_fixup_enable)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_enable) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+		*(__ksymtab)						\
+		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+		*(__ksymtab_gpl)					\
+		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__kcrctab         : AT(ADDR(__kcrctab) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___kcrctab) = .;			\
+		*(__kcrctab)						\
+		VMLINUX_SYMBOL(__stop___kcrctab) = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__kcrctab_gpl     : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___kcrctab_gpl) = .;		\
+		*(__kcrctab_gpl)					\
+		VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: strings */				\
+        __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+		*(__ksymtab_strings)					\
+	}								\
+									\
+	/* Built-in module parameters. */				\
+	__param : AT(ADDR(__param) - LOAD_OFFSET) {			\
+		VMLINUX_SYMBOL(__start___param) = .;			\
+		*(__param)						\
+		VMLINUX_SYMBOL(__stop___param) = .;			\
+	}
+
+#define SECURITY_INIT							\
+	.security_initcall.init : {					\
+		VMLINUX_SYMBOL(__security_initcall_start) = .;		\
+		*(.security_initcall.init) 				\
+		VMLINUX_SYMBOL(__security_initcall_end) = .;		\
+	}
+
+#define SCHED_TEXT							\
+		VMLINUX_SYMBOL(__sched_text_start) = .;			\
+		*(.sched.text)						\
+		VMLINUX_SYMBOL(__sched_text_end) = .;
+
+#define LOCK_TEXT							\
+		VMLINUX_SYMBOL(__lock_text_start) = .;			\
+		*(.spinlock.text)					\
+		VMLINUX_SYMBOL(__lock_text_end) = .;
diff --git a/include/asm-generic/xor.h b/include/asm-generic/xor.h
new file mode 100644
index 000000000000..aaab875e1a35
--- /dev/null
+++ b/include/asm-generic/xor.h
@@ -0,0 +1,718 @@
+/*
+ * include/asm-generic/xor.h
+ *
+ * Generic optimized RAID-5 checksumming functions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/processor.h>
+
+static void
+xor_8regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0];
+		p1[1] ^= p2[1];
+		p1[2] ^= p2[2];
+		p1[3] ^= p2[3];
+		p1[4] ^= p2[4];
+		p1[5] ^= p2[5];
+		p1[6] ^= p2[6];
+		p1[7] ^= p2[7];
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0];
+		p1[1] ^= p2[1] ^ p3[1];
+		p1[2] ^= p2[2] ^ p3[2];
+		p1[3] ^= p2[3] ^ p3[3];
+		p1[4] ^= p2[4] ^ p3[4];
+		p1[5] ^= p2[5] ^ p3[5];
+		p1[6] ^= p2[6] ^ p3[6];
+		p1[7] ^= p2[7] ^ p3[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0] ^ p5[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1] ^ p5[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2] ^ p5[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3] ^ p5[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4] ^ p5[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5] ^ p5[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6] ^ p5[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7] ^ p5[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		d0 ^= p5[0];
+		d1 ^= p5[1];
+		d2 ^= p5[2];
+		d3 ^= p5[3];
+		d4 ^= p5[4];
+		d5 ^= p5[5];
+		d6 ^= p5[6];
+		d7 ^= p5[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_p_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+	prefetchw(p1);
+	prefetch(p2);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+ once_more:
+		p1[0] ^= p2[0];
+		p1[1] ^= p2[1];
+		p1[2] ^= p2[2];
+		p1[3] ^= p2[3];
+		p1[4] ^= p2[4];
+		p1[5] ^= p2[5];
+		p1[6] ^= p2[6];
+		p1[7] ^= p2[7];
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0];
+		p1[1] ^= p2[1] ^ p3[1];
+		p1[2] ^= p2[2] ^ p3[2];
+		p1[3] ^= p2[3] ^ p3[3];
+		p1[4] ^= p2[4] ^ p3[4];
+		p1[5] ^= p2[5] ^ p3[5];
+		p1[6] ^= p2[6] ^ p3[6];
+		p1[7] ^= p2[7] ^ p3[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+	prefetch(p5);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+		prefetch(p5+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0] ^ p5[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1] ^ p5[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2] ^ p5[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3] ^ p5[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4] ^ p5[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5] ^ p5[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6] ^ p5[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7] ^ p5[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+	prefetch(p5);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+		prefetch(p5+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		d0 ^= p5[0];
+		d1 ^= p5[1];
+		d2 ^= p5[2];
+		d3 ^= p5[3];
+		d4 ^= p5[4];
+		d5 ^= p5[5];
+		d6 ^= p5[6];
+		d7 ^= p5[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static struct xor_block_template xor_block_8regs = {
+	.name = "8regs",
+	.do_2 = xor_8regs_2,
+	.do_3 = xor_8regs_3,
+	.do_4 = xor_8regs_4,
+	.do_5 = xor_8regs_5,
+};
+
+static struct xor_block_template xor_block_32regs = {
+	.name = "32regs",
+	.do_2 = xor_32regs_2,
+	.do_3 = xor_32regs_3,
+	.do_4 = xor_32regs_4,
+	.do_5 = xor_32regs_5,
+};
+
+static struct xor_block_template xor_block_8regs_p = {
+	.name = "8regs_prefetch",
+	.do_2 = xor_8regs_p_2,
+	.do_3 = xor_8regs_p_3,
+	.do_4 = xor_8regs_p_4,
+	.do_5 = xor_8regs_p_5,
+};
+
+static struct xor_block_template xor_block_32regs_p = {
+	.name = "32regs_prefetch",
+	.do_2 = xor_32regs_p_2,
+	.do_3 = xor_32regs_p_3,
+	.do_4 = xor_32regs_p_4,
+	.do_5 = xor_32regs_p_5,
+};
+
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_8regs_p);	\
+		xor_speed(&xor_block_32regs);	\
+		xor_speed(&xor_block_32regs_p);	\
+	} while (0)
diff --git a/include/asm-h8300/a.out.h b/include/asm-h8300/a.out.h
new file mode 100644
index 000000000000..3c70939f9f00
--- /dev/null
+++ b/include/asm-h8300/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __H8300_A_OUT_H__
+#define __H8300_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __H8300_A_OUT_H__ */
diff --git a/include/asm-h8300/atomic.h b/include/asm-h8300/atomic.h
new file mode 100644
index 000000000000..7230f6507995
--- /dev/null
+++ b/include/asm-h8300/atomic.h
@@ -0,0 +1,113 @@
+#ifndef __ARCH_H8300_ATOMIC__
+#define __ARCH_H8300_ATOMIC__
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+#include <asm/system.h>
+#include <linux/kernel.h>
+
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	ret = v->counter += i;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_add(i, v) atomic_add_return(i, v)
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	ret = v->counter -= i;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_sub(i, v) atomic_sub_return(i, v)
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	v->counter++;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_inc(v) atomic_inc_return(v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	--v->counter;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_dec(v) atomic_dec_return(v)
+
+static __inline__ int atomic_dec_and_test(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	--v->counter;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret == 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("stc ccr,r1l\n\t"
+	                     "orc #0x80,ccr\n\t"
+	                     "mov.l %0,er0\n\t"
+	                     "and.l %1,er0\n\t"
+	                     "mov.l er0,%0\n\t"
+	                     "ldc r1l,ccr" 
+                             : "=m" (*v) : "g" (~(mask)) :"er0","er1");
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("stc ccr,r1l\n\t"
+	                     "orc #0x80,ccr\n\t"
+	                     "mov.l %0,er0\n\t"
+	                     "or.l %1,er0\n\t"
+	                     "mov.l er0,%0\n\t"
+	                     "ldc r1l,ccr" 
+                             : "=m" (*v) : "g" (mask) :"er0","er1");
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/include/asm-h8300/bitops.h b/include/asm-h8300/bitops.h
new file mode 100644
index 000000000000..5036f595f8c9
--- /dev/null
+++ b/include/asm-h8300/bitops.h
@@ -0,0 +1,410 @@
+#ifndef _H8300_BITOPS_H
+#define _H8300_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2002, Yoshinori Sato
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>
+
+#ifdef __KERNEL__
+/*
+ * Function prototypes to keep gcc -Wall happy
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	result = -1;
+	__asm__("1:\n\t"
+		"shlr.l %2\n\t"
+		"adds #1,%0\n\t"
+		"bcs 1b"
+		: "=r" (result)
+		: "0"  (result),"r" (word));
+	return result;
+}
+
+#define H8300_GEN_BITOP_CONST(OP,BIT)			    \
+	case BIT:					    \
+	__asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
+	break;
+
+#define H8300_GEN_BITOP(FNAME,OP)				      \
+static __inline__ void FNAME(int nr, volatile unsigned long* addr)    \
+{								      \
+	volatile unsigned char *b_addr;				      \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);    \
+	if (__builtin_constant_p(nr)) {				      \
+		switch(nr & 7) {				      \
+			H8300_GEN_BITOP_CONST(OP,0)		      \
+			H8300_GEN_BITOP_CONST(OP,1)		      \
+			H8300_GEN_BITOP_CONST(OP,2)		      \
+			H8300_GEN_BITOP_CONST(OP,3)		      \
+			H8300_GEN_BITOP_CONST(OP,4)		      \
+			H8300_GEN_BITOP_CONST(OP,5)		      \
+			H8300_GEN_BITOP_CONST(OP,6)		      \
+			H8300_GEN_BITOP_CONST(OP,7)		      \
+		}						      \
+	} else {						      \
+		__asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
+	}							      \
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+H8300_GEN_BITOP(set_bit	  ,"bset")
+H8300_GEN_BITOP(clear_bit ,"bclr")
+H8300_GEN_BITOP(change_bit,"bnot")
+#define __set_bit(nr,addr)    set_bit((nr),(addr))
+#define __clear_bit(nr,addr)  clear_bit((nr),(addr))
+#define __change_bit(nr,addr) change_bit((nr),(addr))
+
+#undef H8300_GEN_BITOP
+#undef H8300_GEN_BITOP_CONST
+
+static __inline__ int test_bit(int nr, const unsigned long* addr)
+{
+	return (*((volatile unsigned char *)addr + 
+               ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
+}
+
+#define __test_bit(nr, addr) test_bit(nr, addr)
+
+#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT)			     \
+	case BIT:						     \
+	__asm__("stc ccr,%w1\n\t"				     \
+		"orc #0x80,ccr\n\t"				     \
+		"bld #" #BIT ",@%4\n\t"				     \
+		OP " #" #BIT ",@%4\n\t"				     \
+		"rotxl.l %0\n\t"				     \
+		"ldc %w1,ccr"					     \
+		: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)	     \
+		: "0" (retval),"r" (b_addr)			     \
+		: "memory");                                         \
+        break;
+
+#define H8300_GEN_TEST_BITOP_CONST(OP,BIT)			     \
+	case BIT:						     \
+	__asm__("bld #" #BIT ",@%3\n\t"				     \
+		OP " #" #BIT ",@%3\n\t"				     \
+		"rotxl.l %0\n\t"				     \
+		: "=r"(retval),"=m"(*b_addr)			     \
+		: "0" (retval),"r" (b_addr)			     \
+		: "memory");                                         \
+        break;
+
+#define H8300_GEN_TEST_BITOP(FNNAME,OP)				     \
+static __inline__ int FNNAME(int nr, volatile void * addr)	     \
+{								     \
+	int retval = 0;						     \
+	char ccrsave;						     \
+	volatile unsigned char *b_addr;				     \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
+	if (__builtin_constant_p(nr)) {				     \
+		switch(nr & 7) {				     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,0)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,1)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,2)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,3)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,4)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,5)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,6)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,7)	     \
+		}						     \
+	} else {						     \
+		__asm__("stc ccr,%w1\n\t"			     \
+			"orc #0x80,ccr\n\t"			     \
+			"btst %w5,@%4\n\t"			     \
+			OP " %w5,@%4\n\t"			     \
+			"beq 1f\n\t"				     \
+			"inc.l #1,%0\n"				     \
+			"1:\n\t"				     \
+			"ldc %w1,ccr"				     \
+			: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)  \
+			: "0" (retval),"r" (b_addr),"r"(nr)	     \
+			: "memory");				     \
+	}							     \
+	return retval;						     \
+}								     \
+								     \
+static __inline__ int __ ## FNNAME(int nr, volatile void * addr)     \
+{								     \
+	int retval = 0;						     \
+	volatile unsigned char *b_addr;				     \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
+	if (__builtin_constant_p(nr)) {				     \
+		switch(nr & 7) {				     \
+			H8300_GEN_TEST_BITOP_CONST(OP,0) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,1) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,2) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,3) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,4) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,5) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,6) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,7) 	     \
+		}						     \
+	} else {						     \
+		__asm__("btst %w4,@%3\n\t"			     \
+			OP " %w4,@%3\n\t"			     \
+			"beq 1f\n\t"				     \
+			"inc.l #1,%0\n"				     \
+			"1:"					     \
+			: "=r"(retval),"=m"(*b_addr)		     \
+			: "0" (retval),"r" (b_addr),"r"(nr)	     \
+			: "memory");				     \
+	}							     \
+	return retval;						     \
+}
+
+H8300_GEN_TEST_BITOP(test_and_set_bit,	 "bset")
+H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
+H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
+#undef H8300_GEN_TEST_BITOP_CONST
+#undef H8300_GEN_TEST_BITOP_CONST_INT
+#undef H8300_GEN_TEST_BITOP
+
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+#define ffs(x) generic_ffs(x)
+
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	result = -1;
+	__asm__("1:\n\t"
+		"shlr.l %2\n\t"
+		"adds #1,%0\n\t"
+		"bcc 1b"
+		: "=r" (result)
+		: "0"(result),"r"(word));
+	return result;
+}
+
+static __inline__ int find_next_zero_bit (const unsigned long * addr, int size, int offset)
+{
+	unsigned long *p = (unsigned long *)(((unsigned long)addr + (offset >> 3)) & ~3);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL >> size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned long *p = (unsigned long *)(((unsigned long)addr + (offset >> 3)) & ~3);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)
+		return result + size;
+found_middle:
+	return result + __ffs(tmp);
+}
+
+#define find_first_bit(addr, size) find_next_bit(addr, size, 0)
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+#define ext2_set_bit_atomic(lock, nr, addr) ext2_set_bit(nr, addr)
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+	local_irq_restore(flags);
+	return retval;
+}
+#define ext2_clear_bit_atomic(lock, nr, addr) ext2_set_bit(nr, addr)
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	int			mask;
+	const volatile unsigned char	*ADDR = (const unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+	ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease performance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#define fls(x) generic_fls(x)
+
+#endif /* _H8300_BITOPS_H */
diff --git a/include/asm-h8300/bootinfo.h b/include/asm-h8300/bootinfo.h
new file mode 100644
index 000000000000..5bed7e7aac0a
--- /dev/null
+++ b/include/asm-h8300/bootinfo.h
@@ -0,0 +1,2 @@
+
+/* Nothing for h8300 */
diff --git a/include/asm-h8300/bug.h b/include/asm-h8300/bug.h
new file mode 100644
index 000000000000..edddf5b086e5
--- /dev/null
+++ b/include/asm-h8300/bug.h
@@ -0,0 +1,4 @@
+#ifndef _H8300_BUG_H
+#define _H8300_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-h8300/bugs.h b/include/asm-h8300/bugs.h
new file mode 100644
index 000000000000..1cb4afba6eb1
--- /dev/null
+++ b/include/asm-h8300/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-h8300/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-h8300/byteorder.h b/include/asm-h8300/byteorder.h
new file mode 100644
index 000000000000..36e597d61619
--- /dev/null
+++ b/include/asm-h8300/byteorder.h
@@ -0,0 +1,13 @@
+#ifndef _H8300_BYTEORDER_H
+#define _H8300_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _H8300_BYTEORDER_H */
diff --git a/include/asm-h8300/cache.h b/include/asm-h8300/cache.h
new file mode 100644
index 000000000000..c6350283649d
--- /dev/null
+++ b/include/asm-h8300/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_H8300_CACHE_H
+#define __ARCH_H8300_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  4
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/include/asm-h8300/cachectl.h b/include/asm-h8300/cachectl.h
new file mode 100644
index 000000000000..c464022d8e26
--- /dev/null
+++ b/include/asm-h8300/cachectl.h
@@ -0,0 +1,14 @@
+#ifndef _H8300_CACHECTL_H
+#define _H8300_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define FLUSH_SCOPE_LINE    0	/* Flush a cache line */
+#define FLUSH_SCOPE_PAGE    0	/* Flush a page */
+#define FLUSH_SCOPE_ALL     0	/* Flush the whole cache -- superuser only */
+
+#define FLUSH_CACHE_DATA    0	/* Writeback and flush data cache */
+#define FLUSH_CACHE_INSN    0	/* Flush instruction cache */
+#define FLUSH_CACHE_BOTH    0	/* Flush both caches */
+
+#endif /* _H8300_CACHECTL_H */
diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h
new file mode 100644
index 000000000000..1e4d95bb5ec9
--- /dev/null
+++ b/include/asm-h8300/cacheflush.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#ifndef _ASM_H8300_CACHEFLUSH_H
+#define _AMS_H8300_CACHEFLUSH_H
+
+/*
+ * Cache handling functions
+ * No Cache memory all dummy functions
+ */
+
+#define flush_cache_all()
+#define	flush_cache_mm(mm)
+#define	flush_cache_range(vma,a,b)
+#define	flush_cache_page(vma,p,pfn)
+#define	flush_dcache_page(page)
+#define	flush_dcache_mmap_lock(mapping)
+#define	flush_dcache_mmap_unlock(mapping)
+#define	flush_icache()
+#define	flush_icache_page(vma,page)
+#define	flush_icache_range(start,len)
+#define flush_cache_vmap(start, end)
+#define flush_cache_vunmap(start, end)
+#define	cache_push_v(vaddr,len)
+#define	cache_push(paddr,len)
+#define	cache_clear(paddr,len)
+
+#define	flush_dcache_range(a,b)
+
+#define	flush_icache_user_range(vma,page,addr,len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_H8300_CACHEFLUSH_H */
diff --git a/include/asm-h8300/checksum.h b/include/asm-h8300/checksum.h
new file mode 100644
index 000000000000..3051931dd301
--- /dev/null
+++ b/include/asm-h8300/checksum.h
@@ -0,0 +1,105 @@
+#ifndef _H8300_CHECKSUM_H
+#define _H8300_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+						int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	__asm__("mov.l %0,er0\n\t"
+		"add.w e0,r0\n\t"
+		"xor.w e0,e0\n\t"
+		"rotxl.w e0\n\t"
+		"add.w e0,r0\n\t"
+		"sub.w e0,e0\n\t"
+		"mov.l er0,%0"
+		: "=r"(sum)
+		: "0"(sum)
+		: "er0");
+	return ~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	__asm__ ("sub.l er0,er0\n\t"
+		 "add.l %2,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l	%3,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l %4,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l	er0,%0\n\t"
+		 "bcc	1f\n\t"
+		 "inc.l	#1,%0\n"
+		 "1:"
+		 : "=&r" (sum)
+		 : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
+		 :"er0");
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern unsigned short ip_compute_csum(const unsigned char * buff, int len);
+
+#endif /* _H8300_CHECKSUM_H */
diff --git a/include/asm-h8300/cputime.h b/include/asm-h8300/cputime.h
new file mode 100644
index 000000000000..092e187c7b08
--- /dev/null
+++ b/include/asm-h8300/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_CPUTIME_H
+#define __H8300_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __H8300_CPUTIME_H */
diff --git a/include/asm-h8300/current.h b/include/asm-h8300/current.h
new file mode 100644
index 000000000000..57d74ee55a14
--- /dev/null
+++ b/include/asm-h8300/current.h
@@ -0,0 +1,25 @@
+#ifndef _H8300_CURRENT_H
+#define _H8300_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+#include <asm/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _H8300_CURRENT_H */
diff --git a/include/asm-h8300/dbg.h b/include/asm-h8300/dbg.h
new file mode 100644
index 000000000000..2c6d1cbcf736
--- /dev/null
+++ b/include/asm-h8300/dbg.h
@@ -0,0 +1,2 @@
+#define DEBUG 1
+#define	BREAK asm volatile ("trap #3")
diff --git a/include/asm-h8300/delay.h b/include/asm-h8300/delay.h
new file mode 100644
index 000000000000..cbccbbdd640f
--- /dev/null
+++ b/include/asm-h8300/delay.h
@@ -0,0 +1,38 @@
+#ifndef _H8300_DELAY_H
+#define _H8300_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+extern __inline__ void __delay(unsigned long loops)
+{
+	__asm__ __volatile__ ("1:\n\t"
+			      "dec.l #1,%0\n\t"
+			      "bne 1b"
+			      :"=r" (loops):"0"(loops));
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)  
+ */
+
+extern unsigned long loops_per_jiffy;
+
+extern __inline__ void udelay(unsigned long usecs)
+{
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	usecs /= (loops_per_jiffy*HZ);
+	if (usecs)
+		__delay(usecs);
+}
+
+#endif /* _H8300_DELAY_H */
diff --git a/include/asm-h8300/div64.h b/include/asm-h8300/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-h8300/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-h8300/dma-mapping.h b/include/asm-h8300/dma-mapping.h
new file mode 100644
index 000000000000..d00e40099165
--- /dev/null
+++ b/include/asm-h8300/dma-mapping.h
@@ -0,0 +1 @@
+#include <asm-generic/dma-mapping-broken.h>
diff --git a/include/asm-h8300/dma.h b/include/asm-h8300/dma.h
new file mode 100644
index 000000000000..3708681b7ddc
--- /dev/null
+++ b/include/asm-h8300/dma.h
@@ -0,0 +1,16 @@
+#ifndef _H8300_DMA_H
+#define _H8300_DMA_H 
+ 
+#include <linux/config.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _H8300_DMA_H */
diff --git a/include/asm-h8300/elf.h b/include/asm-h8300/elf.h
new file mode 100644
index 000000000000..f4af1553a55f
--- /dev/null
+++ b/include/asm-h8300/elf.h
@@ -0,0 +1,107 @@
+#ifndef __ASMH8300_ELF_H
+#define __ASMH8300_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_H8_300
+#if defined(__H8300H__)
+#define ELF_FLAGS       0x810000
+#endif
+#if defined(__H8300S__)
+#define ELF_FLAGS       0x820000
+#endif
+
+#define ELF_PLAT_INIT(_r)	_r->er1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#endif
+
+#define R_H8_NONE       0
+#define R_H8_DIR32      1
+#define R_H8_DIR32_28   2
+#define R_H8_DIR32_24   3
+#define R_H8_DIR32_16   4
+#define R_H8_DIR32U     6
+#define R_H8_DIR32U_28  7
+#define R_H8_DIR32U_24  8
+#define R_H8_DIR32U_20  9
+#define R_H8_DIR32U_16 10
+#define R_H8_DIR24     11
+#define R_H8_DIR24_20  12
+#define R_H8_DIR24_16  13
+#define R_H8_DIR24U    14
+#define R_H8_DIR24U_20 15
+#define R_H8_DIR24U_16 16
+#define R_H8_DIR16     17
+#define R_H8_DIR16U    18
+#define R_H8_DIR16S_32 19
+#define R_H8_DIR16S_28 20
+#define R_H8_DIR16S_24 21
+#define R_H8_DIR16S_20 22
+#define R_H8_DIR16S    23
+#define R_H8_DIR8      24
+#define R_H8_DIR8U     25
+#define R_H8_DIR8Z_32  26
+#define R_H8_DIR8Z_28  27
+#define R_H8_DIR8Z_24  28
+#define R_H8_DIR8Z_20  29
+#define R_H8_DIR8Z_16  30
+#define R_H8_PCREL16   31
+#define R_H8_PCREL8    32
+#define R_H8_BPOS      33
+#define R_H8_PCREL32   34
+#define R_H8_GOT32O    35
+#define R_H8_GOT16O    36
+#define R_H8_DIR16A8   59
+#define R_H8_DIR16R8   60
+#define R_H8_DIR24A8   61
+#define R_H8_DIR24R8   62
+#define R_H8_DIR32A16  63
+#define R_H8_ABS32     65
+#define R_H8_ABS32A16 127
+
+#endif
diff --git a/include/asm-h8300/errno.h b/include/asm-h8300/errno.h
new file mode 100644
index 000000000000..0c2f5641fdcc
--- /dev/null
+++ b/include/asm-h8300/errno.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_ERRNO_H
+#define _H8300_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _H8300_ERRNO_H */
diff --git a/include/asm-h8300/fcntl.h b/include/asm-h8300/fcntl.h
new file mode 100644
index 000000000000..355350a57bf9
--- /dev/null
+++ b/include/asm-h8300/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef _H8300_FCNTL_H
+#define _H8300_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	  0003
+#define O_RDONLY	    00
+#define O_WRONLY	    01
+#define O_RDWR		    02
+#define O_CREAT		  0100	/* not fcntl */
+#define O_EXCL		  0200	/* not fcntl */
+#define O_NOCTTY	  0400	/* not fcntl */
+#define O_TRUNC		 01000	/* not fcntl */
+#define O_APPEND	 02000
+#define O_NONBLOCK	 04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		010000
+#define FASYNC		020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* _H8300_FCNTL_H */
diff --git a/include/asm-h8300/flat.h b/include/asm-h8300/flat.h
new file mode 100644
index 000000000000..c20eee767d6f
--- /dev/null
+++ b/include/asm-h8300/flat.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-h8300/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __H8300_FLAT_H__
+#define __H8300_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		1
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+
+/*
+ * on the H8 a couple of the relocations have an instruction in the
+ * top byte.  As there can only be 24bits of address space,  we just
+ * always preserve that 8bits at the top,  when it isn't an instruction
+ * is is 0 (davidm@snapgear.com)
+ */
+
+#define	flat_get_relocate_addr(rel)		(rel)
+#define flat_get_addr_from_rp(rp, relval, flags) \
+        (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
+#define flat_put_addr_at_rp(rp, addr, rel) \
+	put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
+
+#endif /* __H8300_FLAT_H__ */
diff --git a/include/asm-h8300/fpu.h b/include/asm-h8300/fpu.h
new file mode 100644
index 000000000000..4fc416e80bef
--- /dev/null
+++ b/include/asm-h8300/fpu.h
@@ -0,0 +1 @@
+/* Nothing do */
diff --git a/include/asm-h8300/gpio.h b/include/asm-h8300/gpio.h
new file mode 100644
index 000000000000..a714f0c0efbc
--- /dev/null
+++ b/include/asm-h8300/gpio.h
@@ -0,0 +1,52 @@
+#ifndef _H8300_GPIO_H
+#define _H8300_GPIO_H
+
+#define H8300_GPIO_P1 0
+#define H8300_GPIO_P2 1
+#define H8300_GPIO_P3 2
+#define H8300_GPIO_P4 3
+#define H8300_GPIO_P5 4
+#define H8300_GPIO_P6 5
+#define H8300_GPIO_P7 6
+#define H8300_GPIO_P8 7
+#define H8300_GPIO_P9 8
+#define H8300_GPIO_PA 9
+#define H8300_GPIO_PB 10
+#define H8300_GPIO_PC 11
+#define H8300_GPIO_PD 12
+#define H8300_GPIO_PE 13
+#define H8300_GPIO_PF 14
+#define H8300_GPIO_PG 15
+#define H8300_GPIO_PH 16
+
+#define H8300_GPIO_B7 0x80
+#define H8300_GPIO_B6 0x40
+#define H8300_GPIO_B5 0x20
+#define H8300_GPIO_B4 0x10
+#define H8300_GPIO_B3 0x08
+#define H8300_GPIO_B2 0x04
+#define H8300_GPIO_B1 0x02
+#define H8300_GPIO_B0 0x01
+
+#define H8300_GPIO_INPUT 0
+#define H8300_GPIO_OUTPUT 1
+
+#define H8300_GPIO_RESERVE(port, bits) \
+        h8300_reserved_gpio(port, bits)
+
+#define H8300_GPIO_FREE(port, bits) \
+        h8300_free_gpio(port, bits)
+
+#define H8300_GPIO_DDR(port, bit, dir) \
+        h8300_set_gpio_dir(((port) << 8) | (bit), dir)
+
+#define H8300_GPIO_GETDIR(port, bit) \
+        h8300_get_gpio_dir(((port) << 8) | (bit))
+
+extern int h8300_reserved_gpio(int port, int bits);
+extern int h8300_free_gpio(int port, int bits);
+extern int h8300_set_gpio_dir(int port_bit, int dir);
+extern int h8300_get_gpio_dir(int port_bit);
+extern int h8300_init_gpio(void);
+
+#endif
diff --git a/include/asm-h8300/hardirq.h b/include/asm-h8300/hardirq.h
new file mode 100644
index 000000000000..e961bfe201b8
--- /dev/null
+++ b/include/asm-h8300/hardirq.h
@@ -0,0 +1,27 @@
+#ifndef __H8300_HARDIRQ_H
+#define __H8300_HARDIRQ_H
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif
diff --git a/include/asm-h8300/hdreg.h b/include/asm-h8300/hdreg.h
new file mode 100644
index 000000000000..36d0c06687d8
--- /dev/null
+++ b/include/asm-h8300/hdreg.h
@@ -0,0 +1,15 @@
+/*
+ *  linux/include/asm-h8300/hdreg.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+#warning this file is obsolete, please do not use it
+
+#ifndef _H8300_HDREG_H
+#define _H8300_HDREG_H
+
+typedef unsigned int   q40ide_ioreg_t;
+typedef unsigned char * ide_ioreg_t;
+
+#endif /* _H8300_HDREG_H */
diff --git a/include/asm-h8300/hw_irq.h b/include/asm-h8300/hw_irq.h
new file mode 100644
index 000000000000..d75a5a1119e8
--- /dev/null
+++ b/include/asm-h8300/hw_irq.h
@@ -0,0 +1 @@
+/* Do Nothing */
diff --git a/include/asm-h8300/ide.h b/include/asm-h8300/ide.h
new file mode 100644
index 000000000000..f8535ce7476e
--- /dev/null
+++ b/include/asm-h8300/ide.h
@@ -0,0 +1,26 @@
+/****************************************************************************/
+
+/*
+ *  linux/include/asm-h8300/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ *  Copyright (C) 2001       Lineo Inc., davidm@snapgear.com
+ *  Copyright (C) 2002       Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 2002       Yoshinori Sato (ysato@users.sourceforge.jp)
+ */
+
+/****************************************************************************/
+#ifndef _H8300_IDE_H
+#define _H8300_IDE_H
+/****************************************************************************/
+#ifdef __KERNEL__
+/****************************************************************************/
+
+#define MAX_HWIFS	1
+
+#include <asm-generic/ide_iops.h>
+
+/****************************************************************************/
+#endif /* __KERNEL__ */
+#endif /* _H8300_IDE_H */
+/****************************************************************************/
diff --git a/include/asm-h8300/io.h b/include/asm-h8300/io.h
new file mode 100644
index 000000000000..1773e373e9c6
--- /dev/null
+++ b/include/asm-h8300/io.h
@@ -0,0 +1,333 @@
+#ifndef _H8300_IO_H
+#define _H8300_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/virtconvert.h>
+
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+#include <asm/regs306x.h>
+#elif defined(CONFIG_H8S2678)
+#include <asm/regs267x.h>
+#else
+#error UNKNOWN CPU TYPE
+#endif
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+#ifndef H8300_IO_NOSWAP
+	unsigned short r;
+	__asm__("xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0"
+		:"=r"(r)
+		:"0"(v));
+	return r;
+#else
+	return v;
+#endif
+}
+
+static inline unsigned long _swapl(volatile unsigned long v)
+{
+#ifndef H8300_IO_NOSWAP
+	unsigned long r;
+	__asm__("xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0\n\t"
+		"xor.w %e0,%f0\n\t"
+		"xor.w %f0,%e0\n\t"
+		"xor.w %e0,%f0\n\t"
+		"xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0"
+		:"=r"(r)
+		:"0"(v));
+	return r;
+#else
+	return v;
+#endif
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = \
+     *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+#define readw(addr) \
+    ({ unsigned short __v = \
+     *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+#define readl(addr) \
+    ({ unsigned long __v = \
+     *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned long *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline int h8300_buswidth(unsigned int addr)
+{
+	return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
+}
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned char  *ap_b = (volatile unsigned char *) addr;
+	volatile unsigned short *ap_w = (volatile unsigned short *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+
+	if(h8300_buswidth(addr) && (addr & 1)) {
+		while (len--)
+			*ap_w = *bp++;
+	} else {
+		while (len--)
+			*ap_b = *bp++;
+	}
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char  *ap_b;
+	volatile unsigned short *ap_w;
+	unsigned char *bp = (unsigned char *) buf;
+
+	if(h8300_buswidth(addr)) {
+		ap_w = (volatile unsigned short *)(addr & ~1);
+		while (len--)
+			*bp++ = *ap_w & 0xff;
+	} else {
+		ap_b = (volatile unsigned char *)addr;
+		while (len--)
+			*bp++ = *ap_b;
+	}
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define mmiowb()
+
+#define inb(addr)    ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr))
+#define inw(addr)    _swapw(readw(addr))
+#define inl(addr)    _swapl(readl(addr))
+#define outb(x,addr) ((void)((h8300_buswidth(addr) && \
+                      ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr)))
+#define outw(x,addr) ((void) writew(_swapw(x),addr))
+#define outl(x,addr) ((void) writel(_swapl(x),addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/* H8/300 internal I/O functions */
+static __inline__ unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static __inline__ unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static __inline__ unsigned long ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define mm_ptov(vaddr)		((void *) (vaddr))
+#define mm_vtop(vaddr)		((unsigned long) (vaddr))
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_IO_H */
diff --git a/include/asm-h8300/ioctl.h b/include/asm-h8300/ioctl.h
new file mode 100644
index 000000000000..031c623478b3
--- /dev/null
+++ b/include/asm-h8300/ioctl.h
@@ -0,0 +1,80 @@
+/* $Id: ioctl.h,v 1.1 2002/11/19 02:09:26 gerg Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _H8300_IOCTL_H
+#define _H8300_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * I don't really have any idea about what this should look like, so
+ * for the time being, this is heavily based on the PC definitions.
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _H8300_IOCTL_H */
diff --git a/include/asm-h8300/ioctls.h b/include/asm-h8300/ioctls.h
new file mode 100644
index 000000000000..ac20457e5978
--- /dev/null
+++ b/include/asm-h8300/ioctls.h
@@ -0,0 +1,81 @@
+#ifndef __ARCH_H8300_IOCTLS_H__
+#define __ARCH_H8300_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ARCH_H8300_IOCTLS_H__ */
diff --git a/include/asm-h8300/ipc.h b/include/asm-h8300/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-h8300/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-h8300/ipcbuf.h b/include/asm-h8300/ipcbuf.h
new file mode 100644
index 000000000000..2cd1ebcc109d
--- /dev/null
+++ b/include/asm-h8300/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __H8300_IPCBUF_H__
+#define __H8300_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for H8/300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __H8300_IPCBUF_H__ */
diff --git a/include/asm-h8300/irq.h b/include/asm-h8300/irq.h
new file mode 100644
index 000000000000..5027181ed067
--- /dev/null
+++ b/include/asm-h8300/irq.h
@@ -0,0 +1,75 @@
+#ifndef _H8300_IRQ_H_
+#define _H8300_IRQ_H_
+
+#include <asm/ptrace.h>
+
+#if defined(__H8300H__)
+#define NR_IRQS 64
+#define EXT_IRQ0 12
+#define EXT_IRQ1 13
+#define EXT_IRQ2 14
+#define EXT_IRQ3 15
+#define EXT_IRQ4 16
+#define EXT_IRQ5 17
+#define EXT_IRQ6 18
+#define EXT_IRQ7 19
+#define EXT_IRQS 5
+
+#include <asm/regs306x.h>
+#define h8300_clear_isr(irq)                                                \
+do {                                                                        \
+	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ5)                             \
+		*(volatile unsigned char *)ISR &= ~(1 << (irq - EXT_IRQ0)); \
+} while(0)
+
+#define IER_REGS *(volatile unsigned char *)IER
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define NR_IRQS 128
+#define EXT_IRQ0 16
+#define EXT_IRQ1 17
+#define EXT_IRQ2 18
+#define EXT_IRQ3 19
+#define EXT_IRQ4 20
+#define EXT_IRQ5 21
+#define EXT_IRQ6 22
+#define EXT_IRQ7 23
+#define EXT_IRQ8 24
+#define EXT_IRQ9 25
+#define EXT_IRQ10 26
+#define EXT_IRQ11 27
+#define EXT_IRQ12 28
+#define EXT_IRQ13 29
+#define EXT_IRQ14 30
+#define EXT_IRQ15 31
+#define EXT_IRQS 15
+
+#include <asm/regs267x.h>
+#define h8300_clear_isr(irq)                                                 \
+do {                                                                         \
+	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15)                             \
+		*(volatile unsigned short *)ISR &= ~(1 << (irq - EXT_IRQ0)); \
+} while(0)
+
+#define IER_REGS *(volatile unsigned short *)IER
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern void enable_irq(unsigned int);
+extern void disable_irq(unsigned int);
+
+/*
+ * Some drivers want these entry points
+ */
+#define enable_irq_nosync(x)	enable_irq(x)
+#define disable_irq_nosync(x)	disable_irq(x)
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _H8300_IRQ_H_ */
diff --git a/include/asm-h8300/keyboard.h b/include/asm-h8300/keyboard.h
new file mode 100644
index 000000000000..b05d11387ae5
--- /dev/null
+++ b/include/asm-h8300/keyboard.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-h8300/keyboard.h
+ *  Created 04 Dec 2001 by Khaled Hassounah <khassounah@mediumware.net>
+ *  This file contains the Dragonball architecture specific keyboard definitions
+ */
+
+#ifndef _H8300_KEYBOARD_H
+#define _H8300_KEYBOARD_H
+
+#include <linux/config.h>
+
+/* dummy i.e. no real keyboard */
+#define kbd_setkeycode(x...)	(-ENOSYS)
+#define kbd_getkeycode(x...)	(-ENOSYS)
+#define kbd_translate(x...)	(0)
+#define kbd_unexpected_up(x...)	(1)
+#define kbd_leds(x...)		do {;} while (0)
+#define kbd_init_hw(x...)	do {;} while (0)
+#define kbd_enable_irq(x...)	do {;} while (0)
+#define kbd_disable_irq(x...)	do {;} while (0)
+
+
+/* needed if MAGIC_SYSRQ is enabled for serial console */
+#ifndef SYSRQ_KEY
+#define SYSRQ_KEY		((unsigned char)(-1))
+#define kbd_sysrq_xlate         ((unsigned char *)NULL)
+#endif
+
+
+#endif  /* _H8300_KEYBOARD_H */
+
+
+
diff --git a/include/asm-h8300/kmap_types.h b/include/asm-h8300/kmap_types.h
new file mode 100644
index 000000000000..82431edeb2a1
--- /dev/null
+++ b/include/asm-h8300/kmap_types.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-h8300/linkage.h b/include/asm-h8300/linkage.h
new file mode 100644
index 000000000000..6f4df7d46180
--- /dev/null
+++ b/include/asm-h8300/linkage.h
@@ -0,0 +1,8 @@
+#ifndef _H8300_LINKAGE_H
+#define _H8300_LINKAGE_H
+
+#undef SYMBOL_NAME_LABEL
+#undef SYMBOL_NAME
+#define SYMBOL_NAME_LABEL(_name_) _##_name_##:
+#define SYMBOL_NAME(_name_) _##_name_
+#endif
diff --git a/include/asm-h8300/local.h b/include/asm-h8300/local.h
new file mode 100644
index 000000000000..fdd4efe437cd
--- /dev/null
+++ b/include/asm-h8300/local.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_LOCAL_H_
+#define _H8300_LOCAL_H_
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/include/asm-h8300/mc146818rtc.h b/include/asm-h8300/mc146818rtc.h
new file mode 100644
index 000000000000..ab9d9646d241
--- /dev/null
+++ b/include/asm-h8300/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _H8300_MC146818RTC_H
+#define _H8300_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _H8300_MC146818RTC_H */
diff --git a/include/asm-h8300/md.h b/include/asm-h8300/md.h
new file mode 100644
index 000000000000..1a47dc6691fb
--- /dev/null
+++ b/include/asm-h8300/md.h
@@ -0,0 +1,13 @@
+/* $Id: md.h,v 1.1 2002/11/19 02:09:26 gerg Exp $
+ * md.h: High speed xor_block operation for RAID4/5 
+ *
+ */
+ 
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/include/asm-h8300/mman.h b/include/asm-h8300/mman.h
new file mode 100644
index 000000000000..abe08856c84f
--- /dev/null
+++ b/include/asm-h8300/mman.h
@@ -0,0 +1,40 @@
+#ifndef __H8300_MMAN_H__
+#define __H8300_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __H8300_MMAN_H__ */
diff --git a/include/asm-h8300/mmu.h b/include/asm-h8300/mmu.h
new file mode 100644
index 000000000000..2ce06ea46104
--- /dev/null
+++ b/include/asm-h8300/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif
diff --git a/include/asm-h8300/mmu_context.h b/include/asm-h8300/mmu_context.h
new file mode 100644
index 000000000000..23b555b7b4b9
--- /dev/null
+++ b/include/asm-h8300/mmu_context.h
@@ -0,0 +1,32 @@
+#ifndef __H8300_MMU_CONTEXT_H
+#define __H8300_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+#define deactivate_mm(tsk,mm)           do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+extern inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/include/asm-h8300/module.h b/include/asm-h8300/module.h
new file mode 100644
index 000000000000..de23231f3196
--- /dev/null
+++ b/include/asm-h8300/module.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_H8300_MODULE_H
+#define _ASM_H8300_MODULE_H
+/*
+ * This file contains the H8/300 architecture specific module code.
+ */
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+#endif /* _ASM_H8/300_MODULE_H */
diff --git a/include/asm-h8300/msgbuf.h b/include/asm-h8300/msgbuf.h
new file mode 100644
index 000000000000..6b148cd09aa5
--- /dev/null
+++ b/include/asm-h8300/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _H8300_MSGBUF_H
+#define _H8300_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for H8/300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _H8300_MSGBUF_H */
diff --git a/include/asm-h8300/namei.h b/include/asm-h8300/namei.h
new file mode 100644
index 000000000000..ab6f196db6e0
--- /dev/null
+++ b/include/asm-h8300/namei.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-h8300/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __H8300_NAMEI_H
+#define __H8300_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif
diff --git a/include/asm-h8300/page.h b/include/asm-h8300/page.h
new file mode 100644
index 000000000000..58b053f1ef3b
--- /dev/null
+++ b/include/asm-h8300/page.h
@@ -0,0 +1,104 @@
+#ifndef _H8300_PAGE_H
+#define _H8300_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
+#define KTHREAD_SIZE (8192)
+#else
+#define KTHREAD_SIZE PAGE_SIZE
+#endif
+ 
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_PAGE_H */
diff --git a/include/asm-h8300/page_offset.h b/include/asm-h8300/page_offset.h
new file mode 100644
index 000000000000..8cc6e17218a8
--- /dev/null
+++ b/include/asm-h8300/page_offset.h
@@ -0,0 +1,4 @@
+
+#include <linux/config.h>
+#define PAGE_OFFSET_RAW		0x00000000
+
diff --git a/include/asm-h8300/param.h b/include/asm-h8300/param.h
new file mode 100644
index 000000000000..126dddf72359
--- /dev/null
+++ b/include/asm-h8300/param.h
@@ -0,0 +1,23 @@
+#ifndef _H8300_PARAM_H
+#define _H8300_PARAM_H
+
+#include <linux/config.h>
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#ifdef __KERNEL__
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _H8300_PARAM_H */
diff --git a/include/asm-h8300/pci.h b/include/asm-h8300/pci.h
new file mode 100644
index 000000000000..d032729b19df
--- /dev/null
+++ b/include/asm-h8300/pci.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_H8300_PCI_H
+#define _ASM_H8300_PCI_H
+
+/*
+ * asm-h8300/pci.h - H8/300 specific PCI declarations.
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+extern inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* _ASM_H8300_PCI_H */
diff --git a/include/asm-h8300/percpu.h b/include/asm-h8300/percpu.h
new file mode 100644
index 000000000000..72c03e3666d8
--- /dev/null
+++ b/include/asm-h8300/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_H8300_PERCPU__
+#define __ARCH_H8300_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_H8300_PERCPU__ */
diff --git a/include/asm-h8300/pgalloc.h b/include/asm-h8300/pgalloc.h
new file mode 100644
index 000000000000..c2e89a286d23
--- /dev/null
+++ b/include/asm-h8300/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _H8300_PGALLOC_H
+#define _H8300_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _H8300_PGALLOC_H */
diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h
new file mode 100644
index 000000000000..69076eb31476
--- /dev/null
+++ b/include/asm-h8300/pgtable.h
@@ -0,0 +1,79 @@
+#ifndef _H8300_PGTABLE_H
+#define _H8300_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+#define pgd_present(pgd)     (1)       /* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+#define pmd_none(pmd)           (1)
+#define pgd_offset_k(adrdress)  ((pgd_t *)0)
+#define pte_offset_kernel(dir, address) ((pte_t *)0)
+
+#define PAGE_NONE		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_READONLY	__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)    /* these mean nothing to NO_MM */
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()   do { } while (0)
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#endif /* _H8300_PGTABLE_H */
diff --git a/include/asm-h8300/poll.h b/include/asm-h8300/poll.h
new file mode 100644
index 000000000000..bf49ab8ad6da
--- /dev/null
+++ b/include/asm-h8300/poll.h
@@ -0,0 +1,22 @@
+#ifndef __H8300_POLL_H
+#define __H8300_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		0x0400
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-h8300/posix_types.h b/include/asm-h8300/posix_types.h
new file mode 100644
index 000000000000..7de94b1fd0e5
--- /dev/null
+++ b/include/asm-h8300/posix_types.h
@@ -0,0 +1,64 @@
+#ifndef __ARCH_H8300_POSIX_TYPES_H
+#define __ARCH_H8300_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/include/asm-h8300/processor.h b/include/asm-h8300/processor.h
new file mode 100644
index 000000000000..c6f0a7108ef3
--- /dev/null
+++ b/include/asm-h8300/processor.h
@@ -0,0 +1,135 @@
+/*
+ * include/asm-h8300/processor.h
+ *
+ * Copyright (C) 2002 Yoshinori Sato
+ *
+ * Based on: linux/asm-m68nommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_H8300_PROCESSOR_H
+#define __ASM_H8300_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void) {
+	extern unsigned int	sw_usp;
+	return(sw_usp);
+}
+
+static inline void wrusp(unsigned long usp) {
+	extern unsigned int	sw_usp;
+	sw_usp = usp;
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xFFFFFFFFUL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned long  ccr;		/* saved status register */
+	unsigned long  esp0;            /* points to SR of stack frame */
+	struct {
+		unsigned short *addr;
+		unsigned short inst;
+	} breakinfo;
+};
+
+#define INIT_THREAD  {						\
+	.ksp  = sizeof(init_stack) + (unsigned long)init_stack, \
+	.usp  = 0,						\
+	.ccr  = PS_S,						\
+	.esp0 = 0,						\
+	.breakinfo = {						\
+		.addr = (unsigned short *)-1,			\
+		.inst = 0					\
+	}							\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#if defined(__H8300H__)
+#define start_thread(_regs, _pc, _usp)			        \
+do {							        \
+	set_fs(USER_DS);           /* reads from user space */  \
+  	(_regs)->pc = (_pc);				        \
+	(_regs)->ccr &= 0x00;	   /* clear kernel flag */      \
+	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
+	wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3);	\
+} while(0)
+#endif
+#if defined(__H8300S__)
+#define start_thread(_regs, _pc, _usp)			        \
+do {							        \
+	set_fs(USER_DS);           /* reads from user space */  \
+	(_regs)->pc = (_pc);				        \
+	(_regs)->ccr = 0x00;	   /* clear kernel flag */      \
+	(_regs)->exr = 0x78;       /* enable all interrupts */  \
+	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
+	/* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
+	wrusp(((unsigned long)(_usp)) - 14);                    \
+} while(0)
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    MAP_NR((tsk)->thread.esp0) < max_mapnr) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    do { } while (0)
+
+#endif
diff --git a/include/asm-h8300/ptrace.h b/include/asm-h8300/ptrace.h
new file mode 100644
index 000000000000..c2e05e4b512e
--- /dev/null
+++ b/include/asm-h8300/ptrace.h
@@ -0,0 +1,64 @@
+#ifndef _H8300_PTRACE_H
+#define _H8300_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+#define PT_ER1	   0
+#define PT_ER2	   1
+#define PT_ER3	   2
+#define PT_ER4	   3
+#define PT_ER5	   4
+#define PT_ER6	   5
+#define PT_ER0	   6
+#define PT_ORIG_ER0	   7
+#define PT_CCR	   8
+#define PT_PC	   9
+#define PT_USP	   10
+#define PT_EXR     12
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long     retpc;
+	long     er4;
+	long     er5;
+	long     er6;
+	long     er3;
+	long     er2;
+	long     er1;
+	long     orig_er0;
+	unsigned short ccr;
+	long     er0;
+	long     vector;
+#if defined(CONFIG_CPU_H8S)
+	unsigned short exr;
+#endif
+	unsigned long  pc;
+} __attribute__((aligned(2),packed));
+
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+
+#ifdef __KERNEL__
+#ifndef PS_S
+#define PS_S  (0x10)
+#endif
+
+#if defined(__H8300H__)
+#define H8300_REGS_NO 11
+#endif
+#if defined(__H8300S__)
+#define H8300_REGS_NO 12
+#endif
+
+/* Find the stack offset for a register, relative to thread.esp0. */
+#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
+
+#define user_mode(regs) (!((regs)->ccr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _H8300_PTRACE_H */
diff --git a/include/asm-h8300/regs267x.h b/include/asm-h8300/regs267x.h
new file mode 100644
index 000000000000..1bff731a9f77
--- /dev/null
+++ b/include/asm-h8300/regs267x.h
@@ -0,0 +1,336 @@
+/* internal Peripherals Register address define */
+/* CPU: H8/306x                                 */
+
+#if !defined(__REGS_H8S267x__)
+#define __REGS_H8S267x__ 
+
+#if defined(__KERNEL__)
+
+#define DASTCR 0xFEE01A
+#define DADR0  0xFFFFA4
+#define DADR1  0xFFFFA5
+#define DACR01 0xFFFFA6
+#define DADR2  0xFFFFA8
+#define DADR3  0xFFFFA9
+#define DACR23 0xFFFFAA
+
+#define ADDRA  0xFFFF90
+#define ADDRAH 0xFFFF90
+#define ADDRAL 0xFFFF91
+#define ADDRB  0xFFFF92
+#define ADDRBH 0xFFFF92
+#define ADDRBL 0xFFFF93
+#define ADDRC  0xFFFF94
+#define ADDRCH 0xFFFF94
+#define ADDRCL 0xFFFF95
+#define ADDRD  0xFFFF96
+#define ADDRDH 0xFFFF96
+#define ADDRDL 0xFFFF97
+#define ADDRE  0xFFFF98
+#define ADDREH 0xFFFF98
+#define ADDREL 0xFFFF99
+#define ADDRF  0xFFFF9A
+#define ADDRFH 0xFFFF9A
+#define ADDRFL 0xFFFF9B
+#define ADDRG  0xFFFF9C
+#define ADDRGH 0xFFFF9C
+#define ADDRGL 0xFFFF9D
+#define ADDRH  0xFFFF9E
+#define ADDRHH 0xFFFF9E
+#define ADDRHL 0xFFFF9F
+
+#define ADCSR  0xFFFFA0
+#define ADCR   0xFFFFA1
+
+#define ABWCR  0xFFFEC0
+#define ASTCR  0xFFFEC1
+#define WTCRAH 0xFFFEC2
+#define WTCRAL 0xFFFEC3
+#define WTCRBH 0xFFFEC4
+#define WTCRBL 0xFFFEC5
+#define RDNCR  0xFFFEC6
+#define CSACRH 0xFFFEC8
+#define CSACRL 0xFFFEC9
+#define BROMCRH 0xFFFECA
+#define BROMCRL 0xFFFECB
+#define BCR    0xFFFECC
+#define DRAMCR 0xFFFED0
+#define DRACCR 0xFFFED2
+#define REFCR  0xFFFED4
+#define RTCNT  0xFFFED6
+#define RTCOR  0xFFFED7
+
+#define MAR0AH  0xFFFEE0
+#define MAR0AL  0xFFFEE2
+#define IOAR0A  0xFFFEE4
+#define ETCR0A  0xFFFEE6
+#define MAR0BH  0xFFFEE8
+#define MAR0BL  0xFFFEEA
+#define IOAR0B  0xFFFEEC
+#define ETCR0B  0xFFFEEE
+#define MAR1AH  0xFFFEF0
+#define MAR1AL  0xFFFEF2
+#define IOAR1A  0xFFFEF4
+#define ETCR1A  0xFFFEF6
+#define MAR1BH  0xFFFEF8
+#define MAR1BL  0xFFFEFA
+#define IOAR1B  0xFFFEFC
+#define ETCR1B  0xFFFEFE
+#define DMAWER  0xFFFF20
+#define DMATCR  0xFFFF21
+#define DMACR0A 0xFFFF22
+#define DMACR0B 0xFFFF23
+#define DMACR1A 0xFFFF24
+#define DMACR1B 0xFFFF25
+#define DMABCRH 0xFFFF26
+#define DMABCRL 0xFFFF27
+
+#define EDSAR0  0xFFFDC0
+#define EDDAR0  0xFFFDC4
+#define EDTCR0  0xFFFDC8
+#define EDMDR0  0xFFFDCC
+#define EDMDR0H 0xFFFDCC
+#define EDMDR0L 0xFFFDCD
+#define EDACR0  0xFFFDCE
+#define EDSAR1  0xFFFDD0
+#define EDDAR1  0xFFFDD4
+#define EDTCR1  0xFFFDD8
+#define EDMDR1  0xFFFDDC
+#define EDMDR1H 0xFFFDDC
+#define EDMDR1L 0xFFFDDD
+#define EDACR1  0xFFFDDE
+#define EDSAR2  0xFFFDE0
+#define EDDAR2  0xFFFDE4
+#define EDTCR2  0xFFFDE8
+#define EDMDR2  0xFFFDEC
+#define EDMDR2H 0xFFFDEC
+#define EDMDR2L 0xFFFDED
+#define EDACR2  0xFFFDEE
+#define EDSAR3  0xFFFDF0
+#define EDDAR3  0xFFFDF4
+#define EDTCR3  0xFFFDF8
+#define EDMDR3  0xFFFDFC
+#define EDMDR3H 0xFFFDFC
+#define EDMDR3L 0xFFFDFD
+#define EDACR3  0xFFFDFE
+
+#define IPRA  0xFFFE00
+#define IPRB  0xFFFE02
+#define IPRC  0xFFFE04
+#define IPRD  0xFFFE06
+#define IPRE  0xFFFE08
+#define IPRF  0xFFFE0A
+#define IPRG  0xFFFE0C
+#define IPRH  0xFFFE0E
+#define IPRI  0xFFFE10
+#define IPRJ  0xFFFE12
+#define IPRK  0xFFFE14
+#define ITSR  0xFFFE16
+#define SSIER 0xFFFE18
+#define ISCRH 0xFFFE1A
+#define ISCRL 0xFFFE1C
+
+#define INTCR 0xFFFF31
+#define IER   0xFFFF32
+#define IERH  0xFFFF32
+#define IERL  0xFFFF33
+#define ISR   0xFFFF34
+#define ISRH  0xFFFF34
+#define ISRL  0xFFFF35
+
+#define P1DDR 0xFFFE20
+#define P2DDR 0xFFFE21
+#define P3DDR 0xFFFE22
+#define P4DDR 0xFFFE23
+#define P5DDR 0xFFFE24
+#define P6DDR 0xFFFE25
+#define P7DDR 0xFFFE26
+#define P8DDR 0xFFFE27
+#define P9DDR 0xFFFE28
+#define PADDR 0xFFFE29
+#define PBDDR 0xFFFE2A
+#define PCDDR 0xFFFE2B
+#define PDDDR 0xFFFE2C
+#define PEDDR 0xFFFE2D
+#define PFDDR 0xFFFE2E
+#define PGDDR 0xFFFE2F
+#define PHDDR 0xFFFF74
+
+#define PFCR0 0xFFFE32
+#define PFCR1 0xFFFE33
+#define PFCR2 0xFFFE34
+
+#define PAPCR 0xFFFE36
+#define PBPCR 0xFFFE37
+#define PCPCR 0xFFFE38
+#define PDPCR 0xFFFE39
+#define PEPCR 0xFFFE3A
+
+#define P3ODR 0xFFFE3C
+#define PAODR 0xFFFE3D
+
+#define P1DR  0xFFFF60
+#define P2DR  0xFFFF61
+#define P3DR  0xFFFF62
+#define P4DR  0xFFFF63
+#define P5DR  0xFFFF64
+#define P6DR  0xFFFF65
+#define P7DR  0xFFFF66
+#define P8DR  0xFFFF67
+#define P9DR  0xFFFF68
+#define PADR  0xFFFF69
+#define PBDR  0xFFFF6A
+#define PCDR  0xFFFF6B
+#define PDDR  0xFFFF6C
+#define PEDR  0xFFFF6D
+#define PFDR  0xFFFF6E
+#define PGDR  0xFFFF6F
+#define PHDR  0xFFFF72
+
+#define PORT1 0xFFFF50
+#define PORT2 0xFFFF51
+#define PORT3 0xFFFF52
+#define PORT4 0xFFFF53
+#define PORT5 0xFFFF54
+#define PORT6 0xFFFF55
+#define PORT7 0xFFFF56
+#define PORT8 0xFFFF57
+#define PORT9 0xFFFF58
+#define PORTA 0xFFFF59
+#define PORTB 0xFFFF5A
+#define PORTC 0xFFFF5B
+#define PORTD 0xFFFF5C
+#define PORTE 0xFFFF5D
+#define PORTF 0xFFFF5E
+#define PORTG 0xFFFF5F
+#define PORTH 0xFFFF70
+
+#define PCR   0xFFFF46
+#define PMR   0xFFFF47
+#define NDERH 0xFFFF48
+#define NDERL 0xFFFF49
+#define PODRH 0xFFFF4A
+#define PODRL 0xFFFF4B
+#define NDRH1 0xFFFF4C
+#define NDRL1 0xFFFF4D
+#define NDRH2 0xFFFF4E
+#define NDRL2 0xFFFF4F
+
+#define SMR0  0xFFFF78
+#define BRR0  0xFFFF79
+#define SCR0  0xFFFF7A
+#define TDR0  0xFFFF7B
+#define SSR0  0xFFFF7C
+#define RDR0  0xFFFF7D
+#define SCMR0 0xFFFF7E
+#define SMR1  0xFFFF80
+#define BRR1  0xFFFF81
+#define SCR1  0xFFFF82
+#define TDR1  0xFFFF83
+#define SSR1  0xFFFF84
+#define RDR1  0xFFFF85
+#define SCMR1 0xFFFF86
+#define SMR2  0xFFFF88
+#define BRR2  0xFFFF89
+#define SCR2  0xFFFF8A
+#define TDR2  0xFFFF8B
+#define SSR2  0xFFFF8C
+#define RDR2  0xFFFF8D
+#define SCMR2 0xFFFF8E
+
+#define IRCR0 0xFFFE1E
+#define SEMR  0xFFFDA8
+
+#define MDCR    0xFFFF3E
+#define SYSCR   0xFFFF3D
+#define MSTPCRH 0xFFFF40
+#define MSTPCRL 0xFFFF41
+#define FLMCR1  0xFFFFC8
+#define FLMCR2  0xFFFFC9
+#define EBR1    0xFFFFCA
+#define EBR2    0xFFFFCB
+#define CTGARC_RAMCR   0xFFFECE
+#define SBYCR   0xFFFF3A
+#define SCKCR   0xFFFF3B
+#define PLLCR   0xFFFF45
+
+#define TSTR   0xFFFFC0
+#define TSNC   0XFFFFC1
+
+#define TCR0   0xFFFFD0
+#define TMDR0  0xFFFFD1
+#define TIORH0 0xFFFFD2
+#define TIORL0 0xFFFFD3
+#define TIER0  0xFFFFD4
+#define TSR0   0xFFFFD5
+#define TCNT0  0xFFFFD6
+#define GRA0   0xFFFFD8
+#define GRB0   0xFFFFDA
+#define GRC0   0xFFFFDC
+#define GRD0   0xFFFFDE
+#define TCR1   0xFFFFE0
+#define TMDR1  0xFFFFE1
+#define TIORH1 0xFFFFE2
+#define TIORL1 0xFFFFE3
+#define TIER1  0xFFFFE4
+#define TSR1   0xFFFFE5
+#define TCNT1  0xFFFFE6
+#define GRA1   0xFFFFE8
+#define GRB1   0xFFFFEA
+#define TCR2   0xFFFFF0
+#define TMDR2  0xFFFFF1
+#define TIORH2 0xFFFFF2
+#define TIORL2 0xFFFFF3
+#define TIER2  0xFFFFF4
+#define TSR2   0xFFFFF5
+#define TCNT2  0xFFFFF6
+#define GRA2   0xFFFFF8
+#define GRB2   0xFFFFFA
+#define TCR3   0xFFFE80
+#define TMDR3  0xFFFE81
+#define TIORH3 0xFFFE82
+#define TIORL3 0xFFFE83
+#define TIER3  0xFFFE84
+#define TSR3   0xFFFE85
+#define TCNT3  0xFFFE86
+#define GRA3   0xFFFE88
+#define GRB3   0xFFFE8A
+#define GRC3   0xFFFE8C
+#define GRD3   0xFFFE8E
+#define TCR4   0xFFFE90
+#define TMDR4  0xFFFE91
+#define TIORH4 0xFFFE92
+#define TIORL4 0xFFFE93
+#define TIER4  0xFFFE94
+#define TSR4   0xFFFE95
+#define TCNT4  0xFFFE96
+#define GRA4   0xFFFE98
+#define GRB4   0xFFFE9A
+#define TCR5   0xFFFEA0
+#define TMDR5  0xFFFEA1
+#define TIORH5 0xFFFEA2
+#define TIORL5 0xFFFEA3
+#define TIER5  0xFFFEA4
+#define TSR5   0xFFFEA5
+#define TCNT5  0xFFFEA6
+#define GRA5   0xFFFEA8
+#define GRB5   0xFFFEAA
+
+#define _8TCR0   0xFFFFB0
+#define _8TCR1   0xFFFFB1
+#define _8TCSR0  0xFFFFB2
+#define _8TCSR1  0xFFFFB3
+#define _8TCORA0 0xFFFFB4
+#define _8TCORA1 0xFFFFB5
+#define _8TCORB0 0xFFFFB6
+#define _8TCORB1 0xFFFFB7
+#define _8TCNT0  0xFFFFB8
+#define _8TCNT1  0xFFFFB9
+
+#define TCSR    0xFFFFBC
+#define TCNT    0xFFFFBD
+#define RSTCSRW 0xFFFFBE
+#define RSTCSRR 0xFFFFBF
+
+#endif /* __KERNEL__ */
+#endif /* __REGS_H8S267x__ */
diff --git a/include/asm-h8300/regs306x.h b/include/asm-h8300/regs306x.h
new file mode 100644
index 000000000000..027dd633fa25
--- /dev/null
+++ b/include/asm-h8300/regs306x.h
@@ -0,0 +1,212 @@
+/* internal Peripherals Register address define */
+/* CPU: H8/306x                                 */
+
+#if !defined(__REGS_H8306x__)
+#define __REGS_H8306x__ 
+
+#if defined(__KERNEL__)
+
+#define DASTCR 0xFEE01A
+#define DADR0  0xFEE09C
+#define DADR1  0xFEE09D
+#define DACR   0xFEE09E
+
+#define ADDRAH 0xFFFFE0
+#define ADDRAL 0xFFFFE1
+#define ADDRBH 0xFFFFE2
+#define ADDRBL 0xFFFFE3
+#define ADDRCH 0xFFFFE4
+#define ADDRCL 0xFFFFE5
+#define ADDRDH 0xFFFFE6
+#define ADDRDL 0xFFFFE7
+#define ADCSR  0xFFFFE8
+#define ADCR   0xFFFFE9
+
+#define BRCR   0xFEE013
+#define ADRCR  0xFEE01E
+#define CSCR   0xFEE01F
+#define ABWCR  0xFEE020
+#define ASTCR  0xFEE021
+#define WCRH   0xFEE022
+#define WCRL   0xFEE023
+#define BCR    0xFEE024
+#define DRCRA  0xFEE026
+#define DRCRB  0xFEE027
+#define RTMCSR 0xFEE028
+#define RTCNT  0xFEE029
+#define RTCOR  0xFEE02A
+
+#define MAR0AR  0xFFFF20
+#define MAR0AE  0xFFFF21
+#define MAR0AH  0xFFFF22
+#define MAR0AL  0xFFFF23
+#define ETCR0AL 0xFFFF24
+#define ETCR0AH 0xFFFF25
+#define IOAR0A  0xFFFF26
+#define DTCR0A  0xFFFF27
+#define MAR0BR  0xFFFF28
+#define MAR0BE  0xFFFF29
+#define MAR0BH  0xFFFF2A
+#define MAR0BL  0xFFFF2B
+#define ETCR0BL 0xFFFF2C
+#define ETCR0BH 0xFFFF2D
+#define IOAR0B  0xFFFF2E
+#define DTCR0B  0xFFFF2F
+#define MAR1AR  0xFFFF30
+#define MAR1AE  0xFFFF31
+#define MAR1AH  0xFFFF32
+#define MAR1AL  0xFFFF33
+#define ETCR1AL 0xFFFF34
+#define ETCR1AH 0xFFFF35
+#define IOAR1A  0xFFFF36
+#define DTCR1A  0xFFFF37
+#define MAR1BR  0xFFFF38
+#define MAR1BE  0xFFFF39
+#define MAR1BH  0xFFFF3A
+#define MAR1BL  0xFFFF3B
+#define ETCR1BL 0xFFFF3C
+#define ETCR1BH 0xFFFF3D
+#define IOAR1B  0xFFFF3E
+#define DTCR1B  0xFFFF3F
+
+#define ISCR 0xFEE014
+#define IER  0xFEE015
+#define ISR  0xFEE016
+#define IPRA 0xFEE018
+#define IPRB 0xFEE019
+
+#define P1DDR 0xFEE000
+#define P2DDR 0xFEE001
+#define P3DDR 0xFEE002
+#define P4DDR 0xFEE003
+#define P5DDR 0xFEE004
+#define P6DDR 0xFEE005
+/*#define P7DDR 0xFEE006*/
+#define P8DDR 0xFEE007
+#define P9DDR 0xFEE008
+#define PADDR 0xFEE009
+#define PBDDR 0xFEE00A
+
+#define P1DR  0xFFFFD0
+#define P2DR  0xFFFFD1
+#define P3DR  0xFFFFD2
+#define P4DR  0xFFFFD3
+#define P5DR  0xFFFFD4
+#define P6DR  0xFFFFD5
+/*#define P7DR  0xFFFFD6*/
+#define P8DR  0xFFFFD7
+#define P9DR  0xFFFFD8
+#define PADR  0xFFFFD9
+#define PBDR  0xFFFFDA
+
+#define P2CR  0xFEE03C
+#define P4CR  0xFEE03E
+#define P5CR  0xFEE03F
+
+#define SMR0  0xFFFFB0
+#define BRR0  0xFFFFB1
+#define SCR0  0xFFFFB2
+#define TDR0  0xFFFFB3
+#define SSR0  0xFFFFB4
+#define RDR0  0xFFFFB5
+#define SCMR0 0xFFFFB6
+#define SMR1  0xFFFFB8
+#define BRR1  0xFFFFB9
+#define SCR1  0xFFFFBA
+#define TDR1  0xFFFFBB
+#define SSR1  0xFFFFBC
+#define RDR1  0xFFFFBD
+#define SCMR1 0xFFFFBE
+#define SMR2  0xFFFFC0
+#define BRR2  0xFFFFC1
+#define SCR2  0xFFFFC2
+#define TDR2  0xFFFFC3
+#define SSR2  0xFFFFC4
+#define RDR2  0xFFFFC5
+#define SCMR2 0xFFFFC6
+
+#define MDCR   0xFEE011
+#define SYSCR  0xFEE012
+#define DIVCR  0xFEE01B
+#define MSTCRH 0xFEE01C
+#define MSTCRL 0xFEE01D
+#define FLMCR1 0xFEE030
+#define FLMCR2 0xFEE031
+#define EBR1   0xFEE032
+#define EBR2   0xFEE033
+#define RAMCR  0xFEE077
+
+#define TSTR   0xFFFF60
+#define TSNC   0XFFFF61
+#define TMDR   0xFFFF62
+#define TOLR   0xFFFF63
+#define TISRA  0xFFFF64
+#define TISRB  0xFFFF65
+#define TISRC  0xFFFF66
+#define TCR0   0xFFFF68
+#define TIOR0  0xFFFF69
+#define TCNT0H 0xFFFF6A
+#define TCNT0L 0xFFFF6B
+#define GRA0H  0xFFFF6C
+#define GRA0L  0xFFFF6D
+#define GRB0H  0xFFFF6E
+#define GRB0L  0xFFFF6F
+#define TCR1   0xFFFF70
+#define TIOR1  0xFFFF71
+#define TCNT1H 0xFFFF72
+#define TCNT1L 0xFFFF73
+#define GRA1H  0xFFFF74
+#define GRA1L  0xFFFF75
+#define GRB1H  0xFFFF76
+#define GRB1L  0xFFFF77
+#define TCR3   0xFFFF78
+#define TIOR3  0xFFFF79
+#define TCNT3H 0xFFFF7A
+#define TCNT3L 0xFFFF7B
+#define GRA3H  0xFFFF7C
+#define GRA3L  0xFFFF7D
+#define GRB3H  0xFFFF7E
+#define GRB3L  0xFFFF7F
+
+#define _8TCR0  0xFFFF80
+#define _8TCR1  0xFFFF81
+#define _8TCSR0 0xFFFF82
+#define _8TCSR1 0xFFFF83
+#define TCORA0 0xFFFF84
+#define TCORA1 0xFFFF85
+#define TCORB0 0xFFFF86
+#define TCORB1 0xFFFF87
+#define _8TCNT0 0xFFFF88
+#define _8TCNT1 0xFFFF89
+
+#define _8TCR2  0xFFFF90
+#define _8TCR3  0xFFFF91
+#define _8TCSR2 0xFFFF92
+#define _8TCSR3 0xFFFF93
+#define TCORA2 0xFFFF94
+#define TCORA3 0xFFFF95
+#define TCORB2 0xFFFF96
+#define TCORB3 0xFFFF97
+#define _8TCNT2 0xFFFF98
+#define _8TCNT3 0xFFFF99
+
+#define TCSR   0xFFFF8C
+#define TCNT   0xFFFF8D
+#define RSTCSR 0xFFFF8F
+
+#define TPMR  0xFFFFA0
+#define TPCR  0xFFFFA1
+#define NDERB 0xFFFFA2
+#define NDERA 0xFFFFA3
+#define NDRB1 0xFFFFA4
+#define NDRA1 0xFFFFA5
+#define NDRB2 0xFFFFA6
+#define NDRA2 0xFFFFA7
+
+#define TCSR    0xFFFF8C
+#define TCNT    0xFFFF8D
+#define RSTCSRW 0xFFFF8E
+#define RSTCSRR 0xFFFF8F
+
+#endif /* __KERNEL__ */
+#endif /* __REGS_H8306x__ */
diff --git a/include/asm-h8300/resource.h b/include/asm-h8300/resource.h
new file mode 100644
index 000000000000..46c5f4391607
--- /dev/null
+++ b/include/asm-h8300/resource.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_RESOURCE_H
+#define _H8300_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _H8300_RESOURCE_H */
diff --git a/include/asm-h8300/scatterlist.h b/include/asm-h8300/scatterlist.h
new file mode 100644
index 000000000000..7627f0cd1a2f
--- /dev/null
+++ b/include/asm-h8300/scatterlist.h
@@ -0,0 +1,13 @@
+#ifndef _H8300_SCATTERLIST_H
+#define _H8300_SCATTERLIST_H
+
+struct scatterlist {
+	struct page	*page;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_H8300_SCATTERLIST_H) */
diff --git a/include/asm-h8300/sections.h b/include/asm-h8300/sections.h
new file mode 100644
index 000000000000..a81743e8b743
--- /dev/null
+++ b/include/asm-h8300/sections.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SECTIONS_H_
+#define _H8300_SECTIONS_H_
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-h8300/segment.h b/include/asm-h8300/segment.h
new file mode 100644
index 000000000000..b79a82d0f99d
--- /dev/null
+++ b/include/asm-h8300/segment.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_SEGMENT_H
+#define _H8300_SEGMENT_H
+
+/* define constants */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (3)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (4)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_SEGMENT_H */
diff --git a/include/asm-h8300/semaphore-helper.h b/include/asm-h8300/semaphore-helper.h
new file mode 100644
index 000000000000..29e0fbf1acb7
--- /dev/null
+++ b/include/asm-h8300/semaphore-helper.h
@@ -0,0 +1,86 @@
+#ifndef _H8300_SEMAPHORE_HELPER_H
+#define _H8300_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * based on
+ * m68k version by Andreas Schwab
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc((atomic_t *)&sem->sleepers);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 1;
+	if (sem->sleepers <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->sleepers--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif
diff --git a/include/asm-h8300/semaphore.h b/include/asm-h8300/semaphore.h
new file mode 100644
index 000000000000..fe6ef3774297
--- /dev/null
+++ b/include/asm-h8300/semaphore.h
@@ -0,0 +1,194 @@
+#ifndef _H8300_SEMAPHORE_H
+#define _H8300_SEMAPHORE_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+/*
+ * Interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * H8/300 version by Yoshinori Sato
+ */
+
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits. See arch/m68k/lib/semaphore.S
+ */
+static inline void down(struct semaphore * sem)
+{
+	register atomic_t *count asm("er0");
+
+	might_sleep();
+
+	count = &(sem->count);
+	__asm__ __volatile__(
+		"stc ccr,r3l\n\t"
+		"orc #0x80,ccr\n\t"
+		"mov.l %2, er1\n\t"
+		"dec.l #1,er1\n\t"
+		"mov.l er1,%0\n\t"
+		"bpl 1f\n\t"
+		"ldc r3l,ccr\n\t"
+		"mov.l %1,er0\n\t"
+		"jsr @___down\n\t"
+		"bra 2f\n"
+		"1:\n\t"
+		"ldc r3l,ccr\n"
+		"2:"
+		: "=m"(*count)
+		: "g"(sem),"m"(*count)
+		: "cc",  "er1", "er2", "er3");
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	register atomic_t *count asm("er0");
+
+	might_sleep();
+
+	count = &(sem->count);
+	__asm__ __volatile__(
+		"stc ccr,r1l\n\t"
+		"orc #0x80,ccr\n\t"
+		"mov.l %3, er2\n\t"
+		"dec.l #1,er2\n\t"
+		"mov.l er2,%1\n\t"
+		"bpl 1f\n\t"
+		"ldc r1l,ccr\n\t"
+		"mov.l %2,er0\n\t"
+		"jsr @___down_interruptible\n\t"
+		"bra 2f\n"
+		"1:\n\t"
+		"ldc r1l,ccr\n\t"
+		"sub.l %0,%0\n\t"
+		"2:\n\t"
+		: "=r" (count),"=m" (*count)
+		: "g"(sem),"m"(*count)
+		: "cc", "er1", "er2", "er3");
+	return (int)count;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	register atomic_t *count asm("er0");
+
+	count = &(sem->count);
+	__asm__ __volatile__(
+		"stc ccr,r3l\n\t"
+		"orc #0x80,ccr\n\t"
+		"mov.l %3,er2\n\t"
+		"dec.l #1,er2\n\t"
+		"mov.l er2,%0\n\t"
+		"bpl 1f\n\t"
+		"ldc r3l,ccr\n\t"
+		"jmp @3f\n\t"
+		LOCK_SECTION_START(".align 2\n\t")
+		"3:\n\t"
+		"mov.l %2,er0\n\t"
+		"jsr @___down_trylock\n\t"
+		"jmp @2f\n\t"
+		LOCK_SECTION_END
+		"1:\n\t"
+		"ldc r3l,ccr\n\t"
+		"sub.l %1,%1\n"
+		"2:"
+		: "=m" (*count),"=r"(count)
+		: "g"(sem),"m"(*count)
+		: "cc", "er1","er2", "er3");
+	return (int)count;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	register atomic_t *count asm("er0");
+
+	count = &(sem->count);
+	__asm__ __volatile__(
+		"stc ccr,r3l\n\t"
+		"orc #0x80,ccr\n\t"
+		"mov.l %2,er1\n\t"
+		"inc.l #1,er1\n\t"
+		"mov.l er1,%0\n\t"
+		"ldc r3l,ccr\n\t"
+		"sub.l er2,er2\n\t"
+		"cmp.l er2,er1\n\t"
+		"bgt 1f\n\t"
+		"mov.l %1,er0\n\t"
+		"jsr @___up\n"
+		"1:"
+		: "=m"(*count)
+		: "g"(sem),"m"(*count)
+		: "cc", "er1", "er2", "er3");
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-h8300/sembuf.h b/include/asm-h8300/sembuf.h
new file mode 100644
index 000000000000..e04a3ec0cb92
--- /dev/null
+++ b/include/asm-h8300/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _H8300_SEMBUF_H
+#define _H8300_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _H8300_SEMBUF_H */
diff --git a/include/asm-h8300/setup.h b/include/asm-h8300/setup.h
new file mode 100644
index 000000000000..e2c600e96733
--- /dev/null
+++ b/include/asm-h8300/setup.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_SETUP_H
+#define __H8300_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif
diff --git a/include/asm-h8300/sh_bios.h b/include/asm-h8300/sh_bios.h
new file mode 100644
index 000000000000..b6bb6e58295c
--- /dev/null
+++ b/include/asm-h8300/sh_bios.h
@@ -0,0 +1,29 @@
+/* eCos HAL interface header */
+
+#ifndef SH_BIOS_H
+#define SH_BIOS_H
+
+#define HAL_IF_VECTOR_TABLE 0xfffe20
+#define CALL_IF_SET_CONSOLE_COMM  13
+#define QUERY_CURRENT -1
+#define MANGLER       -3
+
+/* Checking for GDB stub active */
+/* suggestion Jonathan Larmour */
+static int sh_bios_in_gdb_mode(void)
+{
+	static int gdb_active = -1;
+	if (gdb_active == -1) {
+		int (*set_console_comm)(int);
+		set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
+		gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
+	}
+	return gdb_active;
+}
+
+static void sh_bios_gdb_detach(void)
+{
+
+}
+
+#endif
diff --git a/include/asm-h8300/shm.h b/include/asm-h8300/shm.h
new file mode 100644
index 000000000000..bec758524839
--- /dev/null
+++ b/include/asm-h8300/shm.h
@@ -0,0 +1,32 @@
+#ifndef _H8300_SHM_H
+#define _H8300_SHM_H
+
+#include <linux/config.h>
+
+/* format of page table entries that correspond to shared memory pages
+   currently out in swap space (see also mm/swap.c):
+   bits 0-1 (PAGE_PRESENT) is  = 0
+   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
+   bits 31..9 are used like this:
+   bits 15..9 (SHM_ID) the id of the shared memory segment
+   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
+                    (actually only bits 25..16 get used since SHMMAX is so low)
+   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
+*/
+/* on the m68k both bits 0 and 1 must be zero */
+/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
+   others are reduced by 2. --m */
+
+#ifndef CONFIG_SUN3
+#define SHM_ID_SHIFT	9
+#else
+#define SHM_ID_SHIFT	7
+#endif
+#define _SHM_ID_BITS	7
+#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
+
+#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
+#define _SHM_IDX_BITS	15
+#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
+
+#endif /* _H8300_SHM_H */
diff --git a/include/asm-h8300/shmbuf.h b/include/asm-h8300/shmbuf.h
new file mode 100644
index 000000000000..64e77993a7a9
--- /dev/null
+++ b/include/asm-h8300/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _H8300_SHMBUF_H
+#define _H8300_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _H8300_SHMBUF_H */
diff --git a/include/asm-h8300/shmparam.h b/include/asm-h8300/shmparam.h
new file mode 100644
index 000000000000..d1863953ec64
--- /dev/null
+++ b/include/asm-h8300/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SHMPARAM_H
+#define _H8300_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _H8300_SHMPARAM_H */
diff --git a/include/asm-h8300/sigcontext.h b/include/asm-h8300/sigcontext.h
new file mode 100644
index 000000000000..e4b81505f8f8
--- /dev/null
+++ b/include/asm-h8300/sigcontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_H8300_SIGCONTEXT_H
+#define _ASM_H8300_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask; 	/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_er0;
+	unsigned long  sc_er1;
+	unsigned long  sc_er2;
+	unsigned long  sc_er3;
+	unsigned long  sc_er4;
+	unsigned long  sc_er5;
+	unsigned long  sc_er6;
+	unsigned short sc_ccr;
+	unsigned long  sc_pc;
+};
+
+#endif
diff --git a/include/asm-h8300/siginfo.h b/include/asm-h8300/siginfo.h
new file mode 100644
index 000000000000..bc8fbea931a5
--- /dev/null
+++ b/include/asm-h8300/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SIGINFO_H
+#define _H8300_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-h8300/signal.h b/include/asm-h8300/signal.h
new file mode 100644
index 000000000000..3a08544a473e
--- /dev/null
+++ b/include/asm-h8300/signal.h
@@ -0,0 +1,185 @@
+#ifndef _H8300_SIGNAL_H
+#define _H8300_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_SIGNAL_H */
diff --git a/include/asm-h8300/smp.h b/include/asm-h8300/smp.h
new file mode 100644
index 000000000000..9e9bd7e58922
--- /dev/null
+++ b/include/asm-h8300/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/include/asm-h8300/socket.h b/include/asm-h8300/socket.h
new file mode 100644
index 000000000000..af33b8525dcf
--- /dev/null
+++ b/include/asm-h8300/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-h8300/sockios.h b/include/asm-h8300/sockios.h
new file mode 100644
index 000000000000..d005d9594cc6
--- /dev/null
+++ b/include/asm-h8300/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_H8300_SOCKIOS__
+#define __ARCH_H8300_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* __ARCH_H8300_SOCKIOS__ */
diff --git a/include/asm-h8300/spinlock.h b/include/asm-h8300/spinlock.h
new file mode 100644
index 000000000000..d5407fa173e4
--- /dev/null
+++ b/include/asm-h8300/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_SPINLOCK_H
+#define __H8300_SPINLOCK_H
+
+#error "H8/300 doesn't do SMP yet"
+
+#endif
diff --git a/include/asm-h8300/stat.h b/include/asm-h8300/stat.h
new file mode 100644
index 000000000000..62c3cc24dfe6
--- /dev/null
+++ b/include/asm-h8300/stat.h
@@ -0,0 +1,78 @@
+#ifndef _H8300_STAT_H
+#define _H8300_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  __unused1;
+	unsigned long  st_mtime;
+	unsigned long  __unused2;
+	unsigned long  st_ctime;
+	unsigned long  __unused3;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[2];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif /* _H8300_STAT_H */
diff --git a/include/asm-h8300/statfs.h b/include/asm-h8300/statfs.h
new file mode 100644
index 000000000000..b96efa712aac
--- /dev/null
+++ b/include/asm-h8300/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_STATFS_H
+#define _H8300_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _H8300_STATFS_H */
diff --git a/include/asm-h8300/string.h b/include/asm-h8300/string.h
new file mode 100644
index 000000000000..ca5034897d87
--- /dev/null
+++ b/include/asm-h8300/string.h
@@ -0,0 +1,44 @@
+#ifndef _H8300_STRING_H_
+#define _H8300_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/include/asm-h8300/system.h b/include/asm-h8300/system.h
new file mode 100644
index 000000000000..dfe96c7121cf
--- /dev/null
+++ b/include/asm-h8300/system.h
@@ -0,0 +1,149 @@
+#ifndef _H8300_SYSTEM_H
+#define _H8300_SYSTEM_H
+
+#include <linux/config.h> /* get configuration macros */
+#include <linux/linkage.h>
+
+#define prepare_to_switch()	do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ *
+ * H8/300 Porting 2002/09/04 Yoshinori Sato
+ */
+
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) {                         \
+  void *_last;						    \
+  __asm__ __volatile__(					    \
+  			"mov.l	%1, er0\n\t"		    \
+			"mov.l	%2, er1\n\t"		    \
+                        "mov.l  %3, er2\n\t"                \
+			"jsr @_resume\n\t"                  \
+                        "mov.l  er2,%0\n\t"                 \
+		       : "=r" (_last)			    \
+		       : "r" (&(prev->thread)),		    \
+			 "r" (&(next->thread)),		    \
+                         "g" (prev)                         \
+		       : "cc", "er0", "er1", "er2", "er3"); \
+  (last) = _last; 					    \
+}
+
+#define __sti() asm volatile ("andc #0x7f,ccr")
+#define __cli() asm volatile ("orc  #0x80,ccr")
+
+#define __save_flags(x) \
+       asm volatile ("stc ccr,%w0":"=r" (x))
+
+#define __restore_flags(x) \
+       asm volatile ("ldc %w0,ccr": :"r" (x))
+
+#define	irqs_disabled()			\
+({					\
+	unsigned char flags;		\
+	__save_flags(flags);	        \
+	((flags & 0x80) == 0x80);	\
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/* For spinlocks etc */
+#define local_irq_disable()	__cli()
+#define local_irq_enable()      __sti()
+#define local_irq_save(x)	({ __save_flags(x); local_irq_disable(); })
+#define local_irq_restore(x)	__restore_flags(x)
+#define local_save_flags(x)     __save_flags(x)
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on H8...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_rmb(var, value)    do { xchg(&var, value); } while (0)
+#define set_mb(var, value)     set_rmb(var, value)
+#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("mov.b %2,%0\n\t"
+     "mov.b %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("mov.w %2,%0\n\t"
+     "mov.w %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("mov.l %2,%0\n\t"
+     "mov.l %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  default:
+    tmp = 0;	  
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("jmp @@0");			\
+})
+
+#define arch_align_stack(x) (x)
+
+#endif /* _H8300_SYSTEM_H */
diff --git a/include/asm-h8300/target_time.h b/include/asm-h8300/target_time.h
new file mode 100644
index 000000000000..9f2a9aa1fe6f
--- /dev/null
+++ b/include/asm-h8300/target_time.h
@@ -0,0 +1,4 @@
+extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
+extern void platform_timer_eoi(void);
+extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, 
+                            unsigned int *hour, unsigned int *min, unsigned int *sec);
diff --git a/include/asm-h8300/termbits.h b/include/asm-h8300/termbits.h
new file mode 100644
index 000000000000..fa69ae00eda3
--- /dev/null
+++ b/include/asm-h8300/termbits.h
@@ -0,0 +1,175 @@
+#ifndef __ARCH_H8300_TERMBITS_H__
+#define __ARCH_H8300_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ARCH_H8300_TERMBITS_H__ */
diff --git a/include/asm-h8300/termios.h b/include/asm-h8300/termios.h
new file mode 100644
index 000000000000..e2319f992af2
--- /dev/null
+++ b/include/asm-h8300/termios.h
@@ -0,0 +1,108 @@
+#ifndef _H8300_TERMIOS_H
+#define _H8300_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+ 
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif /* _H8300_TERMIOS_H */
diff --git a/include/asm-h8300/thread_info.h b/include/asm-h8300/thread_info.h
new file mode 100644
index 000000000000..b07c9344776f
--- /dev/null
+++ b/include/asm-h8300/thread_info.h
@@ -0,0 +1,109 @@
+/* thread_info.h: h8300 low-level thread information
+ * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG*/
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.flags =	0,			\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE		8192	/* 2 pages */
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"mov.l	sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&r"(ti)
+		: "i" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+				__get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PRE_COUNT	16
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		5
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-h8300/timex.h b/include/asm-h8300/timex.h
new file mode 100644
index 000000000000..20413145fabb
--- /dev/null
+++ b/include/asm-h8300/timex.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-h8300/timex.h
+ *
+ * H8/300 architecture timex specifications
+ */
+#ifndef _ASM_H8300_TIMEX_H
+#define _ASM_H8300_TIMEX_H
+
+#define CLOCK_TICK_RATE CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
+
+typedef unsigned long cycles_t;
+extern short h8300_timer_count;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/include/asm-h8300/tlb.h b/include/asm-h8300/tlb.h
new file mode 100644
index 000000000000..3dea80ad9e6f
--- /dev/null
+++ b/include/asm-h8300/tlb.h
@@ -0,0 +1,23 @@
+/* 
+  include/asm-h8300/tlb.h 
+*/
+
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb)	do { } while(0)
+
+/* 
+  include/asm-h8300/tlb.h 
+*/
+
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb)	do { } while(0)
+
+#include <asm-generic/tlb.h>
+
+#endif
+
+#endif
diff --git a/include/asm-h8300/tlbflush.h b/include/asm-h8300/tlbflush.h
new file mode 100644
index 000000000000..bbdffbeeedef
--- /dev/null
+++ b/include/asm-h8300/tlbflush.h
@@ -0,0 +1,61 @@
+#ifndef _H8300_TLBFLUSH_H
+#define _H8300_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+extern inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+#endif /* _H8300_TLBFLUSH_H */
diff --git a/include/asm-h8300/topology.h b/include/asm-h8300/topology.h
new file mode 100644
index 000000000000..fdc121924d4c
--- /dev/null
+++ b/include/asm-h8300/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_H8300_TOPOLOGY_H
+#define _ASM_H8300_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_H8300_TOPOLOGY_H */
diff --git a/include/asm-h8300/traps.h b/include/asm-h8300/traps.h
new file mode 100644
index 000000000000..41cf6be02f68
--- /dev/null
+++ b/include/asm-h8300/traps.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-h8300/traps.h
+ *
+ *  Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _H8300_TRAPS_H
+#define _H8300_TRAPS_H
+
+extern void system_call(void);
+extern void interrupt_entry(void);
+extern void trace_break(void);
+
+#define JMP_OP 0x5a000000
+#define JSR_OP 0x5e000000
+#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
+#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
+
+#define TRACE_VEC 5
+
+#define TRAP0_VEC 8
+#define TRAP1_VEC 9
+#define TRAP2_VEC 10
+#define TRAP3_VEC 11
+
+#if defined(__H8300H__)
+#define NR_TRAPS 12
+#endif
+#if defined(__H8300S__)
+#define NR_TRAPS 16
+#endif
+
+#endif /* _H8300_TRAPS_H */
diff --git a/include/asm-h8300/types.h b/include/asm-h8300/types.h
new file mode 100644
index 000000000000..21f4fc07ac0e
--- /dev/null
+++ b/include/asm-h8300/types.h
@@ -0,0 +1,67 @@
+#ifndef _H8300_TYPES_H
+#define _H8300_TYPES_H
+
+#if !defined(__ASSEMBLY__)
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#define HAVE_SECTOR_T
+typedef u64 sector_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_TYPES_H */
diff --git a/include/asm-h8300/uaccess.h b/include/asm-h8300/uaccess.h
new file mode 100644
index 000000000000..1480f307a474
--- /dev/null
+++ b/include/asm-h8300/uaccess.h
@@ -0,0 +1,171 @@
+#ifndef __H8300_UACCESS_H
+#define __H8300_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/* We let the MMU do all checking */
+#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+#define	RANGE_CHECK_OK(addr, size, lower, upper) \
+	(((addr) >= (lower)) && (((addr) + (size)) < (upper)))
+
+	extern unsigned long _ramend;
+	return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
+}
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void *addr, unsigned long size)
+{
+	return access_ok(type,addr,size)?0:-EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err = 0;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+    case 2:						\
+    case 4:						\
+	*(ptr) = (__pu_val);   	        		\
+	break;						\
+    case 8:						\
+	memcpy(ptr, &__pu_val, sizeof (*(ptr)));        \
+	break;						\
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err = 0;						\
+    typeof(*(ptr)) __gu_val = 0;				\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+    case 2:							\
+    case 4:							\
+	__gu_val = *(ptr);	                		\
+	break;							\
+    case 8:							\
+	memcpy(&__gu_val, ptr, sizeof (*(ptr))); 		\
+	break;							\
+    default:							\
+	__gu_val = 0;						\
+	__gu_err = __get_user_bad();				\
+	break;							\
+    }								\
+    (x) = __gu_val;						\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#endif /* _H8300_UACCESS_H */
diff --git a/include/asm-h8300/ucontext.h b/include/asm-h8300/ucontext.h
new file mode 100644
index 000000000000..0bcf8f85fab9
--- /dev/null
+++ b/include/asm-h8300/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _H8300_UCONTEXT_H
+#define _H8300_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/include/asm-h8300/unaligned.h b/include/asm-h8300/unaligned.h
new file mode 100644
index 000000000000..8a93961173c3
--- /dev/null
+++ b/include/asm-h8300/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef __H8300_UNALIGNED_H
+#define __H8300_UNALIGNED_H
+
+#include <linux/config.h>
+
+/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+
+#define get_unaligned(ptr) \
+  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
+
+#define put_unaligned(val, ptr)				\
+  ({ __typeof__(*(ptr)) __tmp = (val);			\
+     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
+     (void)0; })
+
+#endif
diff --git a/include/asm-h8300/unistd.h b/include/asm-h8300/unistd.h
new file mode 100644
index 000000000000..48b362ff7500
--- /dev/null
+++ b/include/asm-h8300/unistd.h
@@ -0,0 +1,555 @@
+#ifndef _ASM_H8300_UNISTD_H_
+#define _ASM_H8300_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+#define __NR_security		223
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_alloc_hugepages	250
+#define __NR_free_hugepages	251
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_sys_epoll_create	254
+#define __NR_sys_epoll_ctl	255
+#define __NR_sys_epoll_wait	256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_sys_kexec_load	283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+
+#define NR_syscalls 289
+
+
+/* user-visible error numbers are in the range -1 - -122: see
+   <asm-m68k/errno.h> */
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+	/* avoid using res which is declared to be in register d0; \
+	   errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+#define _syscall0(type, name)							\
+type name(void)									\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%1,er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name)					\
+			: "cc");						\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {			\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall1(type, name, atype, a)						\
+type name(atype a)								\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%2, er1\n\t"					\
+  			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a)						\
+			: "cc", "er1");					\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {			\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall2(type, name, atype, a, btype, b)				\
+type name(atype a, btype b)							\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%3, er2\n\t"					\
+  			"mov.l	%2, er1\n\t"					\
+			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a),					\
+			  "g" ((long)b)						\
+			: "cc", "er1", "er2"); 				\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {			\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall3(type, name, atype, a, btype, b, ctype, c)			\
+type name(atype a, btype b, ctype c)						\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%4, er3\n\t"					\
+			"mov.l	%3, er2\n\t"					\
+  			"mov.l	%2, er1\n\t"					\
+			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a),					\
+			  "g" ((long)b),					\
+			  "g" ((long)c)						\
+			: "cc", "er1", "er2", "er3");  			\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {			\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d)		\
+type name(atype a, btype b, ctype c, dtype d)					\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%5, er4\n\t"					\
+			"mov.l	%4, er3\n\t"					\
+			"mov.l	%3, er2\n\t"					\
+  			"mov.l	%2, er1\n\t"					\
+			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a),					\
+			  "g" ((long)b),					\
+			  "g" ((long)c),					\
+			  "g" ((long)d)						\
+			: "cc", "er1", "er2", "er3", "er4");			\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {			\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e)	\
+type name(atype a, btype b, ctype c, dtype d, etype e)				\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	%6, er5\n\t"					\
+			"mov.l	%5, er4\n\t"					\
+			"mov.l	%4, er3\n\t"					\
+			"mov.l	%3, er2\n\t"					\
+  			"mov.l	%2, er1\n\t"					\
+			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a),					\
+			  "g" ((long)b),					\
+			  "g" ((long)c),					\
+			  "g" ((long)d),					\
+			  "m" ((long)e)						\
+			: "cc", "er1", "er2", "er3", "er4", "er5");		\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {		       	\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+		
+#define _syscall6(type, name, atype, a, btype, b, ctype, c, dtype, d,           \
+                              etype, e, ftype, f)	                        \
+type name(atype a, btype b, ctype c, dtype d, etype e, ftype f)			\
+{										\
+  register long __res __asm__("er0");						\
+  __asm__ __volatile__ ("mov.l	er6,@-sp\n\t"					\
+                        "mov.l	%7, er6\n\t"					\
+                        "mov.l	%6, er5\n\t"					\
+			"mov.l	%5, er4\n\t"					\
+			"mov.l	%4, er3\n\t"					\
+			"mov.l	%3, er2\n\t"					\
+  			"mov.l	%2, er1\n\t"					\
+			"mov.l	%1, er0\n\t"					\
+  			"trapa	#0\n\t"						\
+  			"mov.l	@sp+,er6"					\
+			: "=r" (__res)						\
+			: "ir" (__NR_##name),					\
+			  "g" ((long)a),					\
+			  "g" ((long)b),					\
+			  "g" ((long)c),					\
+			  "g" ((long)d),					\
+			  "m" ((long)e),					\
+			  "m" ((long)e)						\
+			: "cc", "er1", "er2", "er3", "er4", "er5");		\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {		       	\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+		
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(int,pause)
+static inline _syscall0(int,sync)
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall1(int,_exit,int,exitcode)
+static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static inline _syscall1(int,delete_module,const char *,name)
+
+static inline pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(char *name, char **argv, char **envp,
+			int dummy, ...);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(name)						\
+  asm (".weak\t_" #name "\n"				\
+       ".set\t_" #name ",_sys_ni_syscall");
+
+#endif /* _ASM_H8300_UNISTD_H_ */
diff --git a/include/asm-h8300/user.h b/include/asm-h8300/user.h
new file mode 100644
index 000000000000..6c64f99af3e1
--- /dev/null
+++ b/include/asm-h8300/user.h
@@ -0,0 +1,76 @@
+#ifndef _H8300_USER_H
+#define _H8300_USER_H
+
+#include <asm/page.h>
+
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+   is still the layout used by user (the new pt_regs doesn't have
+   all registers). */
+struct user_regs_struct {
+	long er1,er2,er3,er4,er5,er6;
+	long er0;
+	long usp;
+	long orig_er0;
+	short ccr;
+	long pc;
+};
+
+	
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  struct user_regs_struct *u_ar0;
+				/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/include/asm-h8300/virtconvert.h b/include/asm-h8300/virtconvert.h
new file mode 100644
index 000000000000..3b344c1dfe0f
--- /dev/null
+++ b/include/asm-h8300/virtconvert.h
@@ -0,0 +1,23 @@
+#ifndef __H8300_VIRT_CONVERT__
+#define __H8300_VIRT_CONVERT__
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define mm_ptov(vaddr)		((void *) (vaddr))
+#define mm_vtop(vaddr)		((unsigned long) (vaddr))
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#endif
+#endif
diff --git a/include/asm-i386/8253pit.h b/include/asm-i386/8253pit.h
new file mode 100644
index 000000000000..96c7c3592daf
--- /dev/null
+++ b/include/asm-i386/8253pit.h
@@ -0,0 +1,12 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#include <asm/timex.h>
+
+#define PIT_TICK_RATE 	CLOCK_TICK_RATE
+
+#endif
diff --git a/include/asm-i386/a.out.h b/include/asm-i386/a.out.h
new file mode 100644
index 000000000000..ab17bb8e5465
--- /dev/null
+++ b/include/asm-i386/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __I386_A_OUT_H__
+#define __I386_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
new file mode 100644
index 000000000000..c976c1dadece
--- /dev/null
+++ b/include/asm-i386/acpi.h
@@ -0,0 +1,190 @@
+/*
+ *  asm-i386/acpi.h
+ *
+ *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
+  *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <asm/system.h>		/* defines cmpxchg */
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces 
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+
+
+static inline int
+__acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+__acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
+	((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
+	((Acq) = __acpi_release_global_lock((unsigned int *) GLptr))
+
+/*
+ * Math helper asm macros
+ */
+#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
+        asm("divl %2;"        \
+        :"=a"(q32), "=d"(r32) \
+        :"r"(d32),            \
+        "0"(n_lo), "1"(n_hi))
+
+
+#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
+    asm("shrl   $1,%2;"             \
+        "rcrl   $1,%3;"             \
+        :"=r"(n_hi), "=r"(n_lo)     \
+        :"0"(n_hi), "1"(n_lo))
+
+/*
+ * Refer Intel ACPI _PDC support document for bit definitions
+ */
+#define ACPI_PDC_EST_CAPABILITY_SMP 	0xa
+#define ACPI_PDC_EST_CAPABILITY_MSR	0x1
+
+#ifdef CONFIG_ACPI_BOOT 
+extern int acpi_lapic;
+extern int acpi_ioapic;
+extern int acpi_noirq;
+extern int acpi_strict;
+extern int acpi_disabled;
+extern int acpi_ht;
+extern int acpi_pci_disabled;
+static inline void disable_acpi(void) 
+{ 
+	acpi_disabled = 1; 
+	acpi_ht = 0;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
+#define FIX_ACPI_PAGES 4
+
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
+
+#ifdef CONFIG_X86_IO_APIC
+extern int skip_ioapic_setup;
+extern int acpi_skip_timer_override;
+
+extern void check_acpi_pci(void);
+
+static inline void disable_ioapic_setup(void)
+{
+	skip_ioapic_setup = 1;
+}
+
+static inline int ioapic_setup_disabled(void)
+{
+	return skip_ioapic_setup;
+}
+
+#else
+static inline void disable_ioapic_setup(void) { }
+static inline void check_acpi_pci(void) { }
+
+#endif
+
+#else	/* CONFIG_ACPI_BOOT */
+#  define acpi_lapic 0
+#  define acpi_ioapic 0
+
+#endif
+
+#ifdef CONFIG_ACPI_PCI
+static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void) 
+{
+	acpi_pci_disabled = 1; 
+	acpi_noirq_set();
+}
+extern int acpi_irq_balance_set(char *str);
+#else
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline int acpi_irq_balance_set(char *str) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+
+extern unsigned long acpi_wakeup_address;
+
+/* early initialization routine */
+extern void acpi_reserve_bootmem(void);
+
+#endif /*CONFIG_ACPI_SLEEP*/
+
+extern u8 x86_acpiid_to_apicid[];
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-i386/agp.h b/include/asm-i386/agp.h
new file mode 100644
index 000000000000..a917ff50354f
--- /dev/null
+++ b/include/asm-i386/agp.h
@@ -0,0 +1,24 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+
+/* 
+ * Functions to keep the agpgart mappings coherent with the MMU.
+ * The GART gives the CPU a physical alias of pages in memory. The alias region is
+ * mapped uncacheable. Make sure there are no conflicting mappings
+ * with different cachability attributes for the same page. This avoids
+ * data corruption on some CPUs.
+ */
+
+int map_page_into_agp(struct page *page);
+int unmap_page_from_agp(struct page *page);
+#define flush_agp_mappings() global_flush_tlb()
+
+/* Could use CLFLUSH here if the cpu supports it. But then it would
+   need to be called for each cacheline of the whole page so it may not be 
+   worth it. Would need a page for it. */
+#define flush_agp_cache() asm volatile("wbinvd":::"memory")
+
+#endif
diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h
new file mode 100644
index 000000000000..e1de67483f38
--- /dev/null
+++ b/include/asm-i386/apic.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_APIC_H
+#define __ASM_APIC_H
+
+#include <linux/config.h>
+#include <linux/pm.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/system.h>
+
+#define Dprintk(x...)
+
+/*
+ * Debugging macros
+ */
+#define APIC_QUIET   0
+#define APIC_VERBOSE 1
+#define APIC_DEBUG   2
+
+extern int apic_verbosity;
+
+/*
+ * Define the default level of output to be very little
+ * This can be turned up by using apic=verbose for more
+ * information and apic=debug for _lots_ of information.
+ * apic_verbosity is defined in apic.c
+ */
+#define apic_printk(v, s, a...) do {       \
+		if ((v) <= apic_verbosity) \
+			printk(s, ##a);    \
+	} while (0)
+
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+/*
+ * Basic functions accessing APICs.
+ */
+
+static __inline void apic_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(APIC_BASE+reg)) = v;
+}
+
+static __inline void apic_write_atomic(unsigned long reg, unsigned long v)
+{
+	xchg((volatile unsigned long *)(APIC_BASE+reg), v);
+}
+
+static __inline unsigned long apic_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(APIC_BASE+reg));
+}
+
+static __inline__ void apic_wait_icr_idle(void)
+{
+	while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY )
+		cpu_relax();
+}
+
+int get_physical_broadcast(void);
+
+#ifdef CONFIG_X86_GOOD_APIC
+# define FORCE_READ_AROUND_WRITE 0
+# define apic_read_around(x)
+# define apic_write_around(x,y) apic_write((x),(y))
+#else
+# define FORCE_READ_AROUND_WRITE 1
+# define apic_read_around(x) apic_read(x)
+# define apic_write_around(x,y) apic_write_atomic((x),(y))
+#endif
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction:
+	 * - a single rmw on Pentium/82489DX
+	 * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write_around(APIC_EOI, 0);
+}
+
+extern void (*wait_timer_tick)(void);
+
+extern int get_maxlvt(void);
+extern void clear_local_APIC(void);
+extern void connect_bsp_APIC (void);
+extern void disconnect_bsp_APIC (void);
+extern void disable_local_APIC (void);
+extern void lapic_shutdown (void);
+extern int verify_local_APIC (void);
+extern void cache_APIC_registers (void);
+extern void sync_Arb_IDs (void);
+extern void init_bsp_APIC (void);
+extern void setup_local_APIC (void);
+extern void init_apic_mappings (void);
+extern void smp_local_timer_interrupt (struct pt_regs * regs);
+extern void setup_boot_APIC_clock (void);
+extern void setup_secondary_APIC_clock (void);
+extern void setup_apic_nmi_watchdog (void);
+extern int reserve_lapic_nmi(void);
+extern void release_lapic_nmi(void);
+extern void disable_timer_nmi_watchdog(void);
+extern void enable_timer_nmi_watchdog(void);
+extern void nmi_watchdog_tick (struct pt_regs * regs);
+extern int APIC_init_uniprocessor (void);
+extern void disable_APIC_timer(void);
+extern void enable_APIC_timer(void);
+
+extern int check_nmi_watchdog (void);
+extern void enable_NMI_through_LVT0 (void * dummy);
+
+extern unsigned int nmi_watchdog;
+#define NMI_NONE	0
+#define NMI_IO_APIC	1
+#define NMI_LOCAL_APIC	2
+#define NMI_INVALID	3
+
+#else /* !CONFIG_X86_LOCAL_APIC */
+static inline void lapic_shutdown(void) { }
+
+#endif /* !CONFIG_X86_LOCAL_APIC */
+
+#endif /* __ASM_APIC_H */
diff --git a/include/asm-i386/apicdef.h b/include/asm-i386/apicdef.h
new file mode 100644
index 000000000000..c689554ad5b9
--- /dev/null
+++ b/include/asm-i386/apicdef.h
@@ -0,0 +1,377 @@
+#ifndef __ASM_APICDEF_H
+#define __ASM_APICDEF_H
+
+/*
+ * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
+ *
+ * Alan Cox <Alan.Cox@linux.org>, 1995.
+ * Ingo Molnar <mingo@redhat.com>, 1999, 2000
+ */
+
+#define		APIC_DEFAULT_PHYS_BASE	0xfee00000
+ 
+#define		APIC_ID		0x20
+#define		APIC_LVR	0x30
+#define			APIC_LVR_MASK		0xFF00FF
+#define			GET_APIC_VERSION(x)	((x)&0xFF)
+#define			GET_APIC_MAXLVT(x)	(((x)>>16)&0xFF)
+#define			APIC_INTEGRATED(x)	((x)&0xF0)
+#define		APIC_TASKPRI	0x80
+#define			APIC_TPRI_MASK		0xFF
+#define		APIC_ARBPRI	0x90
+#define			APIC_ARBPRI_MASK	0xFF
+#define		APIC_PROCPRI	0xA0
+#define		APIC_EOI	0xB0
+#define			APIC_EIO_ACK		0x0		/* Write this to the EOI register */
+#define		APIC_RRR	0xC0
+#define		APIC_LDR	0xD0
+#define			APIC_LDR_MASK		(0xFF<<24)
+#define			GET_APIC_LOGICAL_ID(x)	(((x)>>24)&0xFF)
+#define			SET_APIC_LOGICAL_ID(x)	(((x)<<24))
+#define			APIC_ALL_CPUS		0xFF
+#define		APIC_DFR	0xE0
+#define			APIC_DFR_CLUSTER		0x0FFFFFFFul
+#define			APIC_DFR_FLAT			0xFFFFFFFFul
+#define		APIC_SPIV	0xF0
+#define			APIC_SPIV_FOCUS_DISABLED	(1<<9)
+#define			APIC_SPIV_APIC_ENABLED		(1<<8)
+#define		APIC_ISR	0x100
+#define		APIC_TMR	0x180
+#define 	APIC_IRR	0x200
+#define 	APIC_ESR	0x280
+#define			APIC_ESR_SEND_CS	0x00001
+#define			APIC_ESR_RECV_CS	0x00002
+#define			APIC_ESR_SEND_ACC	0x00004
+#define			APIC_ESR_RECV_ACC	0x00008
+#define			APIC_ESR_SENDILL	0x00020
+#define			APIC_ESR_RECVILL	0x00040
+#define			APIC_ESR_ILLREGA	0x00080
+#define		APIC_ICR	0x300
+#define			APIC_DEST_SELF		0x40000
+#define			APIC_DEST_ALLINC	0x80000
+#define			APIC_DEST_ALLBUT	0xC0000
+#define			APIC_ICR_RR_MASK	0x30000
+#define			APIC_ICR_RR_INVALID	0x00000
+#define			APIC_ICR_RR_INPROG	0x10000
+#define			APIC_ICR_RR_VALID	0x20000
+#define			APIC_INT_LEVELTRIG	0x08000
+#define			APIC_INT_ASSERT		0x04000
+#define			APIC_ICR_BUSY		0x01000
+#define			APIC_DEST_LOGICAL	0x00800
+#define			APIC_DM_FIXED		0x00000
+#define			APIC_DM_LOWEST		0x00100
+#define			APIC_DM_SMI		0x00200
+#define			APIC_DM_REMRD		0x00300
+#define			APIC_DM_NMI		0x00400
+#define			APIC_DM_INIT		0x00500
+#define			APIC_DM_STARTUP		0x00600
+#define			APIC_DM_EXTINT		0x00700
+#define			APIC_VECTOR_MASK	0x000FF
+#define		APIC_ICR2	0x310
+#define			GET_APIC_DEST_FIELD(x)	(((x)>>24)&0xFF)
+#define			SET_APIC_DEST_FIELD(x)	((x)<<24)
+#define		APIC_LVTT	0x320
+#define		APIC_LVTTHMR	0x330
+#define		APIC_LVTPC	0x340
+#define		APIC_LVT0	0x350
+#define			APIC_LVT_TIMER_BASE_MASK	(0x3<<18)
+#define			GET_APIC_TIMER_BASE(x)		(((x)>>18)&0x3)
+#define			SET_APIC_TIMER_BASE(x)		(((x)<<18))
+#define			APIC_TIMER_BASE_CLKIN		0x0
+#define			APIC_TIMER_BASE_TMBASE		0x1
+#define			APIC_TIMER_BASE_DIV		0x2
+#define			APIC_LVT_TIMER_PERIODIC		(1<<17)
+#define			APIC_LVT_MASKED			(1<<16)
+#define			APIC_LVT_LEVEL_TRIGGER		(1<<15)
+#define			APIC_LVT_REMOTE_IRR		(1<<14)
+#define			APIC_INPUT_POLARITY		(1<<13)
+#define			APIC_SEND_PENDING		(1<<12)
+#define			GET_APIC_DELIVERY_MODE(x)	(((x)>>8)&0x7)
+#define			SET_APIC_DELIVERY_MODE(x,y)	(((x)&~0x700)|((y)<<8))
+#define				APIC_MODE_FIXED		0x0
+#define				APIC_MODE_NMI		0x4
+#define				APIC_MODE_EXINT		0x7
+#define 	APIC_LVT1	0x360
+#define		APIC_LVTERR	0x370
+#define		APIC_TMICT	0x380
+#define		APIC_TMCCT	0x390
+#define		APIC_TDCR	0x3E0
+#define			APIC_TDR_DIV_TMBASE	(1<<2)
+#define			APIC_TDR_DIV_1		0xB
+#define			APIC_TDR_DIV_2		0x0
+#define			APIC_TDR_DIV_4		0x1
+#define			APIC_TDR_DIV_8		0x2
+#define			APIC_TDR_DIV_16		0x3
+#define			APIC_TDR_DIV_32		0x8
+#define			APIC_TDR_DIV_64		0x9
+#define			APIC_TDR_DIV_128	0xA
+
+#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+
+#ifdef CONFIG_NUMA
+ #define MAX_IO_APICS 32
+#else
+ #define MAX_IO_APICS 8
+#endif
+
+/*
+ * the local APIC register structure, memory mapped. Not terribly well
+ * tested, but we might eventually use this one in the future - the
+ * problem why we cannot use it right now is the P5 APIC, it has an
+ * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
+ */
+#define u32 unsigned int
+
+#define lapic ((volatile struct local_apic *)APIC_BASE)
+
+struct local_apic {
+
+/*000*/	struct { u32 __reserved[4]; } __reserved_01;
+
+/*010*/	struct { u32 __reserved[4]; } __reserved_02;
+
+/*020*/	struct { /* APIC ID Register */
+		u32   __reserved_1	: 24,
+			phys_apic_id	:  4,
+			__reserved_2	:  4;
+		u32 __reserved[3];
+	} id;
+
+/*030*/	const
+	struct { /* APIC Version Register */
+		u32   version		:  8,
+			__reserved_1	:  8,
+			max_lvt		:  8,
+			__reserved_2	:  8;
+		u32 __reserved[3];
+	} version;
+
+/*040*/	struct { u32 __reserved[4]; } __reserved_03;
+
+/*050*/	struct { u32 __reserved[4]; } __reserved_04;
+
+/*060*/	struct { u32 __reserved[4]; } __reserved_05;
+
+/*070*/	struct { u32 __reserved[4]; } __reserved_06;
+
+/*080*/	struct { /* Task Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} tpr;
+
+/*090*/	const
+	struct { /* Arbitration Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} apr;
+
+/*0A0*/	const
+	struct { /* Processor Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} ppr;
+
+/*0B0*/	struct { /* End Of Interrupt Register */
+		u32   eoi;
+		u32 __reserved[3];
+	} eoi;
+
+/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
+
+/*0D0*/	struct { /* Logical Destination Register */
+		u32   __reserved_1	: 24,
+			logical_dest	:  8;
+		u32 __reserved_2[3];
+	} ldr;
+
+/*0E0*/	struct { /* Destination Format Register */
+		u32   __reserved_1	: 28,
+			model		:  4;
+		u32 __reserved_2[3];
+	} dfr;
+
+/*0F0*/	struct { /* Spurious Interrupt Vector Register */
+		u32	spurious_vector	:  8,
+			apic_enabled	:  1,
+			focus_cpu	:  1,
+			__reserved_2	: 22;
+		u32 __reserved_3[3];
+	} svr;
+
+/*100*/	struct { /* In Service Register */
+/*170*/		u32 bitfield;
+		u32 __reserved[3];
+	} isr [8];
+
+/*180*/	struct { /* Trigger Mode Register */
+/*1F0*/		u32 bitfield;
+		u32 __reserved[3];
+	} tmr [8];
+
+/*200*/	struct { /* Interrupt Request Register */
+/*270*/		u32 bitfield;
+		u32 __reserved[3];
+	} irr [8];
+
+/*280*/	union { /* Error Status Register */
+		struct {
+			u32   send_cs_error			:  1,
+				receive_cs_error		:  1,
+				send_accept_error		:  1,
+				receive_accept_error		:  1,
+				__reserved_1			:  1,
+				send_illegal_vector		:  1,
+				receive_illegal_vector		:  1,
+				illegal_register_address	:  1,
+				__reserved_2			: 24;
+			u32 __reserved_3[3];
+		} error_bits;
+		struct {
+			u32 errors;
+			u32 __reserved_3[3];
+		} all_errors;
+	} esr;
+
+/*290*/	struct { u32 __reserved[4]; } __reserved_08;
+
+/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
+
+/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
+
+/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
+
+/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
+
+/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
+
+/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
+
+/*300*/	struct { /* Interrupt Command Register 1 */
+		u32   vector			:  8,
+			delivery_mode		:  3,
+			destination_mode	:  1,
+			delivery_status		:  1,
+			__reserved_1		:  1,
+			level			:  1,
+			trigger			:  1,
+			__reserved_2		:  2,
+			shorthand		:  2,
+			__reserved_3		:  12;
+		u32 __reserved_4[3];
+	} icr1;
+
+/*310*/	struct { /* Interrupt Command Register 2 */
+		union {
+			u32   __reserved_1	: 24,
+				phys_dest	:  4,
+				__reserved_2	:  4;
+			u32   __reserved_3	: 24,
+				logical_dest	:  8;
+		} dest;
+		u32 __reserved_4[3];
+	} icr2;
+
+/*320*/	struct { /* LVT - Timer */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			timer_mode	:  1,
+			__reserved_3	: 14;
+		u32 __reserved_4[3];
+	} lvt_timer;
+
+/*330*/	struct { /* LVT - Thermal Sensor */
+		u32  vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_thermal;
+
+/*340*/	struct { /* LVT - Performance Counter */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_pc;
+
+/*350*/	struct { /* LVT - LINT0 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint0;
+
+/*360*/	struct { /* LVT - LINT1 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint1;
+
+/*370*/	struct { /* LVT - Error */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_error;
+
+/*380*/	struct { /* Timer Initial Count Register */
+		u32   initial_count;
+		u32 __reserved_2[3];
+	} timer_icr;
+
+/*390*/	const
+	struct { /* Timer Current Count Register */
+		u32   curr_count;
+		u32 __reserved_2[3];
+	} timer_ccr;
+
+/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
+
+/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
+
+/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
+
+/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
+
+/*3E0*/	struct { /* Timer Divide Configuration Register */
+		u32   divisor		:  4,
+			__reserved_1	: 28;
+		u32 __reserved_2[3];
+	} timer_dcr;
+
+/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
+
+} __attribute__ ((packed));
+
+#undef u32
+
+#endif
diff --git a/include/asm-i386/arch_hooks.h b/include/asm-i386/arch_hooks.h
new file mode 100644
index 000000000000..28b96a6fb9fa
--- /dev/null
+++ b/include/asm-i386/arch_hooks.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_ARCH_HOOKS_H
+#define _ASM_ARCH_HOOKS_H
+
+#include <linux/interrupt.h>
+
+/*
+ *	linux/include/asm/arch_hooks.h
+ *
+ *	define the architecture specific hooks 
+ */
+
+/* these aren't arch hooks, they are generic routines
+ * that can be used by the hooks */
+extern void init_ISA_irqs(void);
+extern void apic_intr_init(void);
+extern void smp_intr_init(void);
+extern irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/* these are the defined hooks */
+extern void intr_init_hook(void);
+extern void pre_intr_init_hook(void);
+extern void pre_setup_arch_hook(void);
+extern void trap_init_hook(void);
+extern void time_init_hook(void);
+extern void mca_nmi_hook(void);
+
+#endif
diff --git a/include/asm-i386/atomic.h b/include/asm-i386/atomic.h
new file mode 100644
index 000000000000..509720be772a
--- /dev/null
+++ b/include/asm-i386/atomic.h
@@ -0,0 +1,236 @@
+#ifndef __ARCH_I386_ATOMIC__
+#define __ARCH_I386_ATOMIC__
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/processor.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK "lock ; "
+#else
+#define LOCK ""
+#endif
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically reads the value of @v.
+ */ 
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ * 
+ * Atomically sets the value of @v to @i.
+ */ 
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "addl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "subl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "subl %2,%0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically increments @v by 1.
+ */ 
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "incl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically decrements @v by 1.
+ */ 
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "decl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */ 
+static __inline__ int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "decl %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test 
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */ 
+static __inline__ int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "incl %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ * 
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */ 
+static __inline__ int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "addl %2,%0; sets %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+	int __i;
+#ifdef CONFIG_M386
+	if(unlikely(boot_cpu_data.x86==3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	__asm__ __volatile__(
+		LOCK "xaddl %0, %1;"
+		:"=r"(i)
+		:"m"(v->counter), "0"(i));
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	local_irq_disable();
+	__i = atomic_read(v);
+	atomic_set(v, i + __i);
+	local_irq_enable();
+	return i + __i;
+#endif
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i,v);
+}
+
+#define atomic_inc_return(v)  (atomic_add_return(1,v))
+#define atomic_dec_return(v)  (atomic_sub_return(1,v))
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr) \
+__asm__ __volatile__(LOCK "andl %0,%1" \
+: : "r" (~(mask)),"m" (*addr) : "memory")
+
+#define atomic_set_mask(mask, addr) \
+__asm__ __volatile__(LOCK "orl %0,%1" \
+: : "r" (mask),"m" (*(addr)) : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif
diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h
new file mode 100644
index 000000000000..9db0b712d57a
--- /dev/null
+++ b/include/asm-i386/bitops.h
@@ -0,0 +1,462 @@
+#ifndef _I386_BITOPS_H
+#define _I386_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX "lock ; "
+#else
+#define LOCK_PREFIX ""
+#endif
+
+#define ADDR (*(volatile long *) addr)
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writting portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__(
+		"btsl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__(
+		"btrl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__(
+		"btcl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %1,%0"
+		:"=m" (ADDR)
+		:"Ir" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It may be reordered on other architectures than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr));
+	return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr));
+	return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long* addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"Ir" (nr) : "memory");
+	return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile void * addr);
+#endif
+
+static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+	return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
+}
+
+static inline int variable_test_bit(int nr, const volatile unsigned long * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit)
+		:"m" (ADDR),"Ir" (nr));
+	return oldbit;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+#undef ADDR
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static inline int find_first_zero_bit(const unsigned long *addr, unsigned size)
+{
+	int d0, d1, d2;
+	int res;
+
+	if (!size)
+		return 0;
+	/* This looks at memory. Mark it volatile to tell gcc not to move it around */
+	__asm__ __volatile__(
+		"movl $-1,%%eax\n\t"
+		"xorl %%edx,%%edx\n\t"
+		"repe; scasl\n\t"
+		"je 1f\n\t"
+		"xorl -4(%%edi),%%eax\n\t"
+		"subl $4,%%edi\n\t"
+		"bsfl %%eax,%%edx\n"
+		"1:\tsubl %%ebx,%%edi\n\t"
+		"shll $3,%%edi\n\t"
+		"addl %%edi,%%edx"
+		:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
+		:"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
+	return res;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_zero_bit(const unsigned long *addr, int size, int offset);
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+static inline int find_first_bit(const unsigned long *addr, unsigned size)
+{
+	int d0, d1;
+	int res;
+
+	/* This looks at memory. Mark it volatile to tell gcc not to move it around */
+	__asm__ __volatile__(
+		"xorl %%eax,%%eax\n\t"
+		"repe; scasl\n\t"
+		"jz 1f\n\t"
+		"leal -4(%%edi),%%edi\n\t"
+		"bsfl (%%edi),%%eax\n"
+		"1:\tsubl %%ebx,%%edi\n\t"
+		"shll $3,%%edi\n\t"
+		"addl %%edi,%%eax"
+		:"=a" (res), "=&c" (d0), "=&D" (d1)
+		:"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
+	return res;
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+int find_next_bit(const unsigned long *addr, int size, int offset);
+
+/**
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	__asm__("bsfl %1,%0"
+		:"=r" (word)
+		:"r" (~word));
+	return word;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	__asm__("bsfl %1,%0"
+		:"=r" (word)
+		:"rm" (word));
+	return word;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	int r;
+
+	__asm__("bsfl %1,%0\n\t"
+		"jnz 1f\n\t"
+		"movl $-1,%0\n"
+		"1:" : "=r" (r) : "rm" (x));
+	return r+1;
+}
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_bit((nr),(unsigned long*)addr)
+#define ext2_set_bit_atomic(lock,nr,addr) \
+        test_and_set_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock,nr, addr) \
+	        test_and_clear_bit((nr),(unsigned long*)addr)
+#define ext2_test_bit(nr, addr)      test_bit((nr),(unsigned long*)addr)
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_bit((unsigned long*)addr, size, off)
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,(void*)addr)
+#define minix_set_bit(nr,addr) __set_bit(nr,(void*)addr)
+#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,(void*)addr)
+#define minix_test_bit(nr,addr) test_bit(nr,(void*)addr)
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_bit((void*)addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _I386_BITOPS_H */
diff --git a/include/asm-i386/boot.h b/include/asm-i386/boot.h
new file mode 100644
index 000000000000..96b228e6e79c
--- /dev/null
+++ b/include/asm-i386/boot.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_BOOT_H
+#define _LINUX_BOOT_H
+
+/* Don't touch these, unless you really know what you're doing. */
+#define DEF_INITSEG	0x9000
+#define DEF_SYSSEG	0x1000
+#define DEF_SETUPSEG	0x9020
+#define DEF_SYSSIZE	0x7F00
+
+/* Internal svga startup constants */
+#define NORMAL_VGA	0xffff		/* 80x25 mode */
+#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
+#define ASK_VGA		0xfffd		/* ask for it at bootup */
+
+#endif
diff --git a/include/asm-i386/bug.h b/include/asm-i386/bug.h
new file mode 100644
index 000000000000..706eb511c330
--- /dev/null
+++ b/include/asm-i386/bug.h
@@ -0,0 +1,25 @@
+#ifndef _I386_BUG_H
+#define _I386_BUG_H
+
+#include <linux/config.h>
+
+/*
+ * Tell the user there is some problem.
+ * The offending file and line are encoded after the "officially
+ * undefined" opcode for parsing in the trap handler.
+ */
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define BUG()				\
+ __asm__ __volatile__(	"ud2\n"		\
+			"\t.word %c0\n"	\
+			"\t.long %c1\n"	\
+			 : : "i" (__LINE__), "i" (__FILE__))
+#else
+#define BUG() __asm__ __volatile__("ud2\n")
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-i386/bugs.h b/include/asm-i386/bugs.h
new file mode 100644
index 000000000000..6789fc275da3
--- /dev/null
+++ b/include/asm-i386/bugs.h
@@ -0,0 +1,213 @@
+/*
+ *  include/asm-i386/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ *
+ *  Cyrix stuff, June 1998 by:
+ *	- Rafael R. Reilova (moved everything from head.S),
+ *        <rreilova@ececs.uc.edu>
+ *	- Channing Corn (tests & fixes),
+ *	- Andrew D. Balsa (code cleanup).
+ *
+ *  Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+
+static int __init no_halt(char *s)
+{
+	boot_cpu_data.hlt_works_ok = 0;
+	return 1;
+}
+
+__setup("no-hlt", no_halt);
+
+static int __init mca_pentium(char *s)
+{
+	mca_pentium_flag = 1;
+	return 1;
+}
+
+__setup("mca-pentium", mca_pentium);
+
+static int __init no_387(char *s)
+{
+	boot_cpu_data.hard_math = 0;
+	write_cr0(0xE | read_cr0());
+	return 1;
+}
+
+__setup("no387", no_387);
+
+static double __initdata x = 4195835.0;
+static double __initdata y = 3145727.0;
+
+/*
+ * This used to check for exceptions.. 
+ * However, it turns out that to support that,
+ * the XMM trap handlers basically had to
+ * be buggy. So let's have a correct XMM trap
+ * handler, and forget about printing out
+ * some status at boot.
+ *
+ * We should really only care about bugs here
+ * anyway. Not features.
+ */
+static void __init check_fpu(void)
+{
+	if (!boot_cpu_data.hard_math) {
+#ifndef CONFIG_MATH_EMULATION
+		printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
+		printk(KERN_EMERG "Giving up.\n");
+		for (;;) ;
+#endif
+		return;
+	}
+
+/* Enable FXSR and company _before_ testing for FP problems. */
+	/*
+	 * Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned.
+	 */
+	if (offsetof(struct task_struct, thread.i387.fxsave) & 15) {
+		extern void __buggy_fxsr_alignment(void);
+		__buggy_fxsr_alignment();
+	}
+	if (cpu_has_fxsr) {
+		printk(KERN_INFO "Enabling fast FPU save and restore... ");
+		set_in_cr4(X86_CR4_OSFXSR);
+		printk("done.\n");
+	}
+	if (cpu_has_xmm) {
+		printk(KERN_INFO "Enabling unmasked SIMD FPU exception support... ");
+		set_in_cr4(X86_CR4_OSXMMEXCPT);
+		printk("done.\n");
+	}
+
+	/* Test for the divl bug.. */
+	__asm__("fninit\n\t"
+		"fldl %1\n\t"
+		"fdivl %2\n\t"
+		"fmull %2\n\t"
+		"fldl %1\n\t"
+		"fsubp %%st,%%st(1)\n\t"
+		"fistpl %0\n\t"
+		"fwait\n\t"
+		"fninit"
+		: "=m" (*&boot_cpu_data.fdiv_bug)
+		: "m" (*&x), "m" (*&y));
+	if (boot_cpu_data.fdiv_bug)
+		printk("Hmm, FPU with FDIV bug.\n");
+}
+
+static void __init check_hlt(void)
+{
+	printk(KERN_INFO "Checking 'hlt' instruction... ");
+	if (!boot_cpu_data.hlt_works_ok) {
+		printk("disabled\n");
+		return;
+	}
+	__asm__ __volatile__("hlt ; hlt ; hlt ; hlt");
+	printk("OK.\n");
+}
+
+/*
+ *	Most 386 processors have a bug where a POPAD can lock the 
+ *	machine even from user space.
+ */
+ 
+static void __init check_popad(void)
+{
+#ifndef CONFIG_X86_POPAD_OK
+	int res, inp = (int) &res;
+
+	printk(KERN_INFO "Checking for popad bug... ");
+	__asm__ __volatile__( 
+	  "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
+	  : "=&a" (res)
+	  : "d" (inp)
+	  : "ecx", "edi" );
+	/* If this fails, it means that any user program may lock the CPU hard. Too bad. */
+	if (res != 12345678) printk( "Buggy.\n" );
+		        else printk( "OK.\n" );
+#endif
+}
+
+/*
+ * Check whether we are able to run this kernel safely on SMP.
+ *
+ * - In order to run on a i386, we need to be compiled for i386
+ *   (for due to lack of "invlpg" and working WP on a i386)
+ * - In order to run on anything without a TSC, we need to be
+ *   compiled for a i486.
+ * - In order to support the local APIC on a buggy Pentium machine,
+ *   we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
+ *   which happens implicitly if compiled for a Pentium or lower
+ *   (unless an advanced selection of CPU features is used) as an
+ *   otherwise config implies a properly working local APIC without
+ *   the need to do extra reads from the APIC.
+*/
+
+static void __init check_config(void)
+{
+/*
+ * We'd better not be a i386 if we're configured to use some
+ * i486+ only features! (WP works in supervisor mode and the
+ * new "invlpg" and "bswap" instructions)
+ */
+#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
+	if (boot_cpu_data.x86 == 3)
+		panic("Kernel requires i486+ for 'invlpg' and other features");
+#endif
+
+/*
+ * If we configured ourselves for a TSC, we'd better have one!
+ */
+#ifdef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		panic("Kernel compiled for Pentium+, requires TSC feature!");
+#endif
+
+/*
+ * If we were told we had a good local APIC, check for buggy Pentia,
+ * i.e. all B steppings and the C2 stepping of P54C when using their
+ * integrated APIC (see 11AP erratum in "Pentium Processor
+ * Specification Update").
+ */
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
+	    && cpu_has_apic
+	    && boot_cpu_data.x86 == 5
+	    && boot_cpu_data.x86_model == 2
+	    && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
+		panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
+#endif
+}
+
+extern void alternative_instructions(void);
+
+static void __init check_bugs(void)
+{
+	identify_cpu(&boot_cpu_data);
+#ifndef CONFIG_SMP
+	printk("CPU: ");
+	print_cpu_info(&boot_cpu_data);
+#endif
+	check_config();
+	check_fpu();
+	check_hlt();
+	check_popad();
+	system_utsname.machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
+	alternative_instructions(); 
+}
diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h
new file mode 100644
index 000000000000..a0d73f48d5be
--- /dev/null
+++ b/include/asm-i386/byteorder.h
@@ -0,0 +1,59 @@
+#ifndef _I386_BYTEORDER_H
+#define _I386_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+/* For avoiding bswap on i386 */
+#ifdef __KERNEL__
+#include <linux/config.h>
+#endif
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+#ifdef CONFIG_X86_BSWAP
+	__asm__("bswap %0" : "=r" (x) : "0" (x));
+#else
+	__asm__("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
+		"rorl $16,%0\n\t"	/* swap words		*/
+		"xchgb %b0,%h0"		/* swap higher bytes	*/
+		:"=q" (x)
+		: "0" (x));
+#endif
+	return x;
+}
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 val)
+{ 
+	union { 
+		struct { __u32 a,b; } s;
+		__u64 u;
+	} v;
+	v.u = val;
+#ifdef CONFIG_X86_BSWAP
+	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1" 
+	    : "=r" (v.s.a), "=r" (v.s.b) 
+	    : "0" (v.s.a), "1" (v.s.b)); 
+#else
+   v.s.a = ___arch__swab32(v.s.a); 
+	v.s.b = ___arch__swab32(v.s.b); 
+	asm("xchgl %0,%1" : "=r" (v.s.a), "=r" (v.s.b) : "0" (v.s.a), "1" (v.s.b));
+#endif
+	return v.u;	
+} 
+
+/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
+   convert it into rotation or exhange.  */
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _I386_BYTEORDER_H */
diff --git a/include/asm-i386/cache.h b/include/asm-i386/cache.h
new file mode 100644
index 000000000000..849788710feb
--- /dev/null
+++ b/include/asm-i386/cache.h
@@ -0,0 +1,15 @@
+/*
+ * include/asm-i386/cache.h
+ */
+#ifndef __ARCH_I386_CACHE_H
+#define __ARCH_I386_CACHE_H
+
+#include <linux/config.h>
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#endif
diff --git a/include/asm-i386/cacheflush.h b/include/asm-i386/cacheflush.h
new file mode 100644
index 000000000000..2ea36dea37d9
--- /dev/null
+++ b/include/asm-i386/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef _I386_CACHEFLUSH_H
+#define _I386_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the intel. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+void global_flush_tlb(void); 
+int change_page_attr(struct page *page, int numpages, pgprot_t prot);
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* _I386_CACHEFLUSH_H */
diff --git a/include/asm-i386/checksum.h b/include/asm-i386/checksum.h
new file mode 100644
index 000000000000..d76a5f081c91
--- /dev/null
+++ b/include/asm-i386/checksum.h
@@ -0,0 +1,192 @@
+#ifndef _I386_CHECKSUM_H
+#define _I386_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage unsigned int csum_partial_copy_generic(const unsigned char *src, unsigned char *dst,
+						  int len, int sum, int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	verify_area().
+ */
+static __inline__
+unsigned int csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst,
+					int len, int sum)
+{
+	return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL);
+}
+
+static __inline__
+unsigned int csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst,
+						int len, int sum, int *err_ptr)
+{
+	might_sleep();
+	return csum_partial_copy_generic((__force unsigned char *)src, dst,
+					len, sum, err_ptr, NULL);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline unsigned short ip_fast_csum(unsigned char * iph,
+					  unsigned int ihl)
+{
+	unsigned int sum;
+
+	__asm__ __volatile__(
+	    "movl (%1), %0	;\n"
+	    "subl $4, %2	;\n"
+	    "jbe 2f		;\n"
+	    "addl 4(%1), %0	;\n"
+	    "adcl 8(%1), %0	;\n"
+	    "adcl 12(%1), %0	;\n"
+"1:	    adcl 16(%1), %0	;\n"
+	    "lea 4(%1), %1	;\n"
+	    "decl %2		;\n"
+	    "jne 1b		;\n"
+	    "adcl $0, %0	;\n"
+	    "movl %0, %2	;\n"
+	    "shrl $16, %0	;\n"
+	    "addw %w2, %w0	;\n"
+	    "adcl $0, %0	;\n"
+	    "notl %0		;\n"
+"2:				;\n"
+	/* Since the input registers which are loaded with iph and ipl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl)
+	: "1" (iph), "2" (ihl)
+	: "memory");
+	return(sum);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	__asm__(
+		"addl %1, %0		;\n"
+		"adcl $0xffff, %0	;\n"
+		: "=r" (sum)
+		: "r" (sum << 16), "0" (sum & 0xffff0000)
+	);
+	return (~sum) >> 16;
+}
+
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+    __asm__(
+	"addl %1, %0	;\n"
+	"adcl %2, %0	;\n"
+	"adcl %3, %0	;\n"
+	"adcl $0, %0	;\n"
+	: "=r" (sum)
+	: "g" (daddr), "g"(saddr), "g"((ntohs(len)<<16)+proto*256), "0"(sum));
+    return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+    return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						     struct in6_addr *daddr,
+						     __u32 len,
+						     unsigned short proto,
+						     unsigned int sum)
+{
+	__asm__(
+		"addl 0(%1), %0		;\n"
+		"adcl 4(%1), %0		;\n"
+		"adcl 8(%1), %0		;\n"
+		"adcl 12(%1), %0	;\n"
+		"adcl 0(%2), %0		;\n"
+		"adcl 4(%2), %0		;\n"
+		"adcl 8(%2), %0		;\n"
+		"adcl 12(%2), %0	;\n"
+		"adcl %3, %0		;\n"
+		"adcl %4, %0		;\n"
+		"adcl $0, %0		;\n"
+		: "=&r" (sum)
+		: "r" (saddr), "r" (daddr),
+		  "r"(htonl(len)), "r"(htonl(proto)), "0"(sum));
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ unsigned int csum_and_copy_to_user(const unsigned char *src,
+						     unsigned char __user *dst,
+						     int len, int sum, 
+						     int *err_ptr)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic(src, (__force unsigned char *)dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return -1; /* invalid checksum */
+}
+
+#endif
diff --git a/include/asm-i386/cpu.h b/include/asm-i386/cpu.h
new file mode 100644
index 000000000000..002740b21951
--- /dev/null
+++ b/include/asm-i386/cpu.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_I386_CPU_H_
+#define _ASM_I386_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/nodemask.h>
+
+#include <asm/node.h>
+
+struct i386_cpu {
+	struct cpu cpu;
+};
+extern int arch_register_cpu(int num);
+#ifdef CONFIG_HOTPLUG_CPU
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_I386_CPU_H_ */
diff --git a/include/asm-i386/cpufeature.h b/include/asm-i386/cpufeature.h
new file mode 100644
index 000000000000..e147cabd3bfe
--- /dev/null
+++ b/include/asm-i386/cpufeature.h
@@ -0,0 +1,129 @@
+/*
+ * cpufeature.h
+ *
+ * Defines x86 CPU feature bits
+ */
+
+#ifndef __ASM_I386_CPUFEATURE_H
+#define __ASM_I386_CPUFEATURE_H
+
+#include <linux/bitops.h>
+
+#define NCAPINTS	7	/* N 32-bit words worth of info */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
+#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE 	(0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
+#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
+#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLSH	(0*32+19) /* Supports the CLFLUSH instruction */
+#define X86_FEATURE_DTES	(0*32+21) /* Debug Trace Store */
+#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
+				          /* of FPU context), and CR4.OSFXSR available */
+#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
+#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
+#define X86_FEATURE_SELFSNOOP	(0*32+27) /* CPU self snoop */
+#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC		(0*32+29) /* Automatic clock control */
+#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MP		(1*32+19) /* MP Capable. */
+#define X86_FEATURE_NX		(1*32+20) /* Execute Disable */
+#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
+/* cpu types for specific tunings: */
+#define X86_FEATURE_K8		(3*32+ 4) /* Opteron, Athlon64 */
+#define X86_FEATURE_K7		(3*32+ 5) /* Athlon */
+#define X86_FEATURE_P3		(3*32+ 6) /* P3 */
+#define X86_FEATURE_P4		(3*32+ 7) /* P4 */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
+#define X86_FEATURE_MWAIT	(4*32+ 3) /* Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	(4*32+ 4) /* CPL Qualified Debug Store */
+#define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_CID		(4*32+10) /* Context ID */
+#define X86_FEATURE_CX16        (4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
+
+/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
+#define X86_FEATURE_XSTORE	(5*32+ 2) /* on-CPU RNG present (xstore insn) */
+#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* on-CPU RNG enabled */
+#define X86_FEATURE_XCRYPT	(5*32+ 6) /* on-CPU crypto (xcrypt insn) */
+#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* on-CPU crypto enabled */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM	(5*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY	(5*32+ 1) /* If yes HyperThreading not valid */
+
+#define cpu_has(c, bit)		test_bit(bit, (c)->x86_capability)
+#define boot_cpu_has(bit)	test_bit(bit, boot_cpu_data.x86_capability)
+
+#define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
+#define cpu_has_vme		boot_cpu_has(X86_FEATURE_VME)
+#define cpu_has_de		boot_cpu_has(X86_FEATURE_DE)
+#define cpu_has_pse		boot_cpu_has(X86_FEATURE_PSE)
+#define cpu_has_tsc		boot_cpu_has(X86_FEATURE_TSC)
+#define cpu_has_pae		boot_cpu_has(X86_FEATURE_PAE)
+#define cpu_has_pge		boot_cpu_has(X86_FEATURE_PGE)
+#define cpu_has_apic		boot_cpu_has(X86_FEATURE_APIC)
+#define cpu_has_sep		boot_cpu_has(X86_FEATURE_SEP)
+#define cpu_has_mtrr		boot_cpu_has(X86_FEATURE_MTRR)
+#define cpu_has_mmx		boot_cpu_has(X86_FEATURE_MMX)
+#define cpu_has_fxsr		boot_cpu_has(X86_FEATURE_FXSR)
+#define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
+#define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
+#define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
+#define cpu_has_mp		boot_cpu_has(X86_FEATURE_MP)
+#define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
+#define cpu_has_k6_mtrr		boot_cpu_has(X86_FEATURE_K6_MTRR)
+#define cpu_has_cyrix_arr	boot_cpu_has(X86_FEATURE_CYRIX_ARR)
+#define cpu_has_centaur_mcr	boot_cpu_has(X86_FEATURE_CENTAUR_MCR)
+#define cpu_has_xstore		boot_cpu_has(X86_FEATURE_XSTORE)
+#define cpu_has_xstore_enabled	boot_cpu_has(X86_FEATURE_XSTORE_EN)
+#define cpu_has_xcrypt		boot_cpu_has(X86_FEATURE_XCRYPT)
+#define cpu_has_xcrypt_enabled	boot_cpu_has(X86_FEATURE_XCRYPT_EN)
+
+#endif /* __ASM_I386_CPUFEATURE_H */
+
+/* 
+ * Local Variables:
+ * mode:c
+ * comment-column:42
+ * End:
+ */
diff --git a/include/asm-i386/cputime.h b/include/asm-i386/cputime.h
new file mode 100644
index 000000000000..398ed7cd171d
--- /dev/null
+++ b/include/asm-i386/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __I386_CPUTIME_H
+#define __I386_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __I386_CPUTIME_H */
diff --git a/include/asm-i386/current.h b/include/asm-i386/current.h
new file mode 100644
index 000000000000..d97328951f5f
--- /dev/null
+++ b/include/asm-i386/current.h
@@ -0,0 +1,15 @@
+#ifndef _I386_CURRENT_H
+#define _I386_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+ 
+#define current get_current()
+
+#endif /* !(_I386_CURRENT_H) */
diff --git a/include/asm-i386/debugreg.h b/include/asm-i386/debugreg.h
new file mode 100644
index 000000000000..f0b2b06ae0f7
--- /dev/null
+++ b/include/asm-i386/debugreg.h
@@ -0,0 +1,64 @@
+#ifndef _I386_DEBUGREG_H
+#define _I386_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+   We can slow the instruction pipeline for instructions coming via the
+   gdt or the ldt if we want to.  I am not sure why this is an advantage */
+
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
+
+#endif
diff --git a/include/asm-i386/delay.h b/include/asm-i386/delay.h
new file mode 100644
index 000000000000..456db8501c09
--- /dev/null
+++ b/include/asm-i386/delay.h
@@ -0,0 +1,26 @@
+#ifndef _I386_DELAY_H
+#define _I386_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/i386/lib/delay.c
+ */
+ 
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+	__udelay(n))
+	
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* defined(_I386_DELAY_H) */
diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h
new file mode 100644
index 000000000000..11e67811a990
--- /dev/null
+++ b/include/asm-i386/desc.h
@@ -0,0 +1,144 @@
+#ifndef __ARCH_DESC_H
+#define __ARCH_DESC_H
+
+#include <asm/ldt.h>
+#include <asm/segment.h>
+
+#define CPU_16BIT_STACK_SIZE 1024
+
+#ifndef __ASSEMBLY__
+
+#include <linux/preempt.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+
+#include <asm/mmu.h>
+
+extern struct desc_struct cpu_gdt_table[GDT_ENTRIES];
+DECLARE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]);
+
+DECLARE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
+
+struct Xgt_desc_struct {
+	unsigned short size;
+	unsigned long address __attribute__((packed));
+	unsigned short pad;
+} __attribute__ ((packed));
+
+extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS];
+
+#define load_TR_desc() __asm__ __volatile__("ltr %%ax"::"a" (GDT_ENTRY_TSS*8))
+#define load_LDT_desc() __asm__ __volatile__("lldt %%ax"::"a" (GDT_ENTRY_LDT*8))
+
+/*
+ * This is the ldt that every process will get unless we need
+ * something other than this.
+ */
+extern struct desc_struct default_ldt[];
+extern void set_intr_gate(unsigned int irq, void * addr);
+
+#define _set_tssldt_desc(n,addr,limit,type) \
+__asm__ __volatile__ ("movw %w3,0(%2)\n\t" \
+	"movw %%ax,2(%2)\n\t" \
+	"rorl $16,%%eax\n\t" \
+	"movb %%al,4(%2)\n\t" \
+	"movb %4,5(%2)\n\t" \
+	"movb $0,6(%2)\n\t" \
+	"movb %%ah,7(%2)\n\t" \
+	"rorl $16,%%eax" \
+	: "=m"(*(n)) : "a" (addr), "r"(n), "ir"(limit), "i"(type))
+
+static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, void *addr)
+{
+	_set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[entry], (int)addr,
+		offsetof(struct tss_struct, __cacheline_filler) - 1, 0x89);
+}
+
+#define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
+
+static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int size)
+{
+	_set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_LDT], (int)addr, ((size << 3)-1), 0x82);
+}
+
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	)
+
+#if TLS_SIZE != 24
+# error update this code.
+#endif
+
+static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
+{
+#define C(i) per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
+	C(0); C(1); C(2);
+#undef C
+}
+
+static inline void clear_LDT(void)
+{
+	int cpu = get_cpu();
+
+	set_ldt_desc(cpu, &default_ldt[0], 5);
+	load_LDT_desc();
+	put_cpu();
+}
+
+/*
+ * load one particular LDT into the current CPU
+ */
+static inline void load_LDT_nolock(mm_context_t *pc, int cpu)
+{
+	void *segments = pc->ldt;
+	int count = pc->size;
+
+	if (likely(!count)) {
+		segments = &default_ldt[0];
+		count = 5;
+	}
+		
+	set_ldt_desc(cpu, segments, count);
+	load_LDT_desc();
+}
+
+static inline void load_LDT(mm_context_t *pc)
+{
+	int cpu = get_cpu();
+	load_LDT_nolock(pc, cpu);
+	put_cpu();
+}
+
+static inline unsigned long get_desc_base(unsigned long *desc)
+{
+	unsigned long base;
+	base = ((desc[0] >> 16)  & 0x0000ffff) |
+		((desc[1] << 16) & 0x00ff0000) |
+		(desc[1] & 0xff000000);
+	return base;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-i386/div64.h b/include/asm-i386/div64.h
new file mode 100644
index 000000000000..28ed8b296afc
--- /dev/null
+++ b/include/asm-i386/div64.h
@@ -0,0 +1,48 @@
+#ifndef __I386_DIV64
+#define __I386_DIV64
+
+/*
+ * do_div() is NOT a C function. It wants to return
+ * two values (the quotient and the remainder), but
+ * since that doesn't work very well in C, what it
+ * does is:
+ *
+ * - modifies the 64-bit dividend _in_place_
+ * - returns the 32-bit remainder
+ *
+ * This ends up being the most efficient "calling
+ * convention" on x86.
+ */
+#define do_div(n,base) ({ \
+	unsigned long __upper, __low, __high, __mod, __base; \
+	__base = (base); \
+	asm("":"=a" (__low), "=d" (__high):"A" (n)); \
+	__upper = __high; \
+	if (__high) { \
+		__upper = __high % (__base); \
+		__high = __high / (__base); \
+	} \
+	asm("divl %2":"=a" (__low), "=d" (__mod):"rm" (__base), "0" (__low), "1" (__upper)); \
+	asm("":"=A" (n):"a" (__low),"d" (__high)); \
+	__mod; \
+})
+
+/*
+ * (long)X = ((long long)divs) / (long)div
+ * (long)rem = ((long long)divs) % (long)div
+ *
+ * Warning, this will do an exception if X overflows.
+ */
+#define div_long_long_rem(a,b,c) div_ll_X_l_rem(a,b,c)
+
+extern inline long
+div_ll_X_l_rem(long long divs, long div, long *rem)
+{
+	long dum2;
+      __asm__("divl %2":"=a"(dum2), "=d"(*rem)
+      :	"rm"(div), "A"(divs));
+
+	return dum2;
+
+}
+#endif
diff --git a/include/asm-i386/dma-mapping.h b/include/asm-i386/dma-mapping.h
new file mode 100644
index 000000000000..563964b2995b
--- /dev/null
+++ b/include/asm-i386/dma-mapping.h
@@ -0,0 +1,177 @@
+#ifndef _ASM_I386_DMA_MAPPING_H
+#define _ASM_I386_DMA_MAPPING_H
+
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, unsigned int __nocast flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	flush_write_buffers();
+	return virt_to_phys(ptr);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++ ) {
+		BUG_ON(!sg[i].page);
+
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+
+	flush_write_buffers();
+	return nents;
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+	     size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	return page_to_phys(page) + offset;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if(mask < 0x00ffffff)
+                return 0;
+
+	return 1;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all x86, so return the
+	 * maximum possible, to be safe */
+	return (1 << L1_CACHE_SHIFT_MAX);
+}
+
+#define dma_is_consistent(d)	(1)
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+
+#endif
diff --git a/include/asm-i386/dma.h b/include/asm-i386/dma.h
new file mode 100644
index 000000000000..f24b2bba2831
--- /dev/null
+++ b/include/asm-i386/dma.h
@@ -0,0 +1,298 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <asm/io.h>		/* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-i386/e820.h b/include/asm-i386/e820.h
new file mode 100644
index 000000000000..5c285aee7294
--- /dev/null
+++ b/include/asm-i386/e820.h
@@ -0,0 +1,40 @@
+/*
+ * structures and definitions for the int 15, ax=e820 memory map
+ * scheme.
+ *
+ * In a nutshell, arch/i386/boot/setup.S populates a scratch table
+ * in the empty_zero_block that contains a list of usable address/size
+ * duples.   In arch/i386/kernel/setup.c, this information is
+ * transferred into the e820map, and in arch/i386/mm/init.c, that
+ * new information is used to mark pages reserved or not.
+ *
+ */
+#ifndef __E820_HEADER
+#define __E820_HEADER
+
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	32		/* number of entries in E820MAP */
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3 /* usable as RAM once ACPI tables have been read */
+#define E820_NVS	4
+
+#define HIGH_MEMORY	(1024*1024)
+
+#ifndef __ASSEMBLY__
+
+struct e820map {
+    int nr_map;
+    struct e820entry {
+	unsigned long long addr;	/* start of memory segment */
+	unsigned long long size;	/* size of memory segment */
+	unsigned long type;		/* type of memory segment */
+    } map[E820MAX];
+};
+
+extern struct e820map e820;
+#endif/*!__ASSEMBLY__*/
+
+#endif/*__E820_HEADER*/
diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h
new file mode 100644
index 000000000000..130bdc8c68cf
--- /dev/null
+++ b/include/asm-i386/elf.h
@@ -0,0 +1,193 @@
+#ifndef __ASMi386_ELF_H
+#define __ASMi386_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/processor.h>
+#include <asm/system.h>		/* for savesegment */
+
+#include <linux/utsname.h>
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+typedef struct user_fxsr_struct elf_fpxregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_386
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
+   contains a pointer to a function which might be registered using `atexit'.
+   This provides a mean for the dynamic linker to call DT_FINI functions for
+   shared libraries that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler. 
+
+   We might as well make sure everything else is cleared too (except for %esp),
+   just to make things more deterministic.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	_r->ebx = 0; _r->ecx = 0; _r->edx = 0; \
+	_r->esi = 0; _r->edi = 0; _r->ebp = 0; \
+	_r->eax = 0; \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+   now struct_user_regs, they are different) */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)		\
+	pr_reg[0] = regs->ebx;				\
+	pr_reg[1] = regs->ecx;				\
+	pr_reg[2] = regs->edx;				\
+	pr_reg[3] = regs->esi;				\
+	pr_reg[4] = regs->edi;				\
+	pr_reg[5] = regs->ebp;				\
+	pr_reg[6] = regs->eax;				\
+	pr_reg[7] = regs->xds;				\
+	pr_reg[8] = regs->xes;				\
+	savesegment(fs,pr_reg[9]);			\
+	savesegment(gs,pr_reg[10]);			\
+	pr_reg[11] = regs->orig_eax;			\
+	pr_reg[12] = regs->eip;				\
+	pr_reg[13] = regs->xcs;				\
+	pr_reg[14] = regs->eflags;			\
+	pr_reg[15] = regs->esp;				\
+	pr_reg[16] = regs->xss;
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.x86_capability[0])
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (system_utsname.machine)
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) do { } while (0)
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	(executable_stack != EXSTACK_DISABLE_X)
+
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+#define ELF_CORE_COPY_XFPREGS(tsk, elf_xfpregs) dump_task_extended_fpu(tsk, elf_xfpregs)
+
+#define VSYSCALL_BASE	(__fix_to_virt(FIX_VSYSCALL))
+#define VSYSCALL_EHDR	((const struct elfhdr *) VSYSCALL_BASE)
+#define VSYSCALL_ENTRY	((unsigned long) &__kernel_vsyscall)
+extern void __kernel_vsyscall;
+
+#define ARCH_DLINFO						\
+do {								\
+		NEW_AUX_ENT(AT_SYSINFO,	VSYSCALL_ENTRY);	\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VSYSCALL_BASE);	\
+} while (0)
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the vsyscall DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the vsyscall DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS		(VSYSCALL_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS					      \
+do {									      \
+	const struct elf_phdr *const vsyscall_phdrs =			      \
+		(const struct elf_phdr *) (VSYSCALL_BASE		      \
+					   + VSYSCALL_EHDR->e_phoff);	      \
+	int i;								      \
+	Elf32_Off ofs = 0;						      \
+	for (i = 0; i < VSYSCALL_EHDR->e_phnum; ++i) {			      \
+		struct elf_phdr phdr = vsyscall_phdrs[i];		      \
+		if (phdr.p_type == PT_LOAD) {				      \
+			BUG_ON(ofs != 0);				      \
+			ofs = phdr.p_offset = offset;			      \
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
+			phdr.p_filesz = phdr.p_memsz;			      \
+			offset += phdr.p_filesz;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;				      \
+		phdr.p_paddr = 0; /* match other core phdrs */		      \
+		DUMP_WRITE(&phdr, sizeof(phdr));			      \
+	}								      \
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA					      \
+do {									      \
+	const struct elf_phdr *const vsyscall_phdrs =			      \
+		(const struct elf_phdr *) (VSYSCALL_BASE		      \
+					   + VSYSCALL_EHDR->e_phoff);	      \
+	int i;								      \
+	for (i = 0; i < VSYSCALL_EHDR->e_phnum; ++i) {			      \
+		if (vsyscall_phdrs[i].p_type == PT_LOAD)		      \
+			DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr,	      \
+				   PAGE_ALIGN(vsyscall_phdrs[i].p_memsz));    \
+	}								      \
+} while (0)
+
+#endif
+
+#endif
diff --git a/include/asm-i386/errno.h b/include/asm-i386/errno.h
new file mode 100644
index 000000000000..969b34374728
--- /dev/null
+++ b/include/asm-i386/errno.h
@@ -0,0 +1,6 @@
+#ifndef _I386_ERRNO_H
+#define _I386_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-i386/fcntl.h b/include/asm-i386/fcntl.h
new file mode 100644
index 000000000000..511cde94a3ed
--- /dev/null
+++ b/include/asm-i386/fcntl.h
@@ -0,0 +1,88 @@
+#ifndef _I386_FCNTL_H
+#define _I386_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif
diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h
new file mode 100644
index 000000000000..c94cac958389
--- /dev/null
+++ b/include/asm-i386/fixmap.h
@@ -0,0 +1,158 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+
+/* used by vmalloc.c, vsyscall.lds.S.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap.
+ */
+#define __FIXADDR_TOP	0xfffff000
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+	FIX_VSYSCALL,
+#ifdef CONFIG_X86_LOCAL_APIC
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+	FIX_CO_CPU,	/* Cobalt timer */
+	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */ 
+	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
+	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
+#endif
+#ifdef CONFIG_X86_F00F_BUG
+	FIX_F00F_IDT,	/* Virtual mapping for IDT */
+#endif
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	FIX_CYCLONE_TIMER, /*cyclone timer register*/
+#endif 
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+#ifdef CONFIG_ACPI_BOOT
+	FIX_ACPI_BEGIN,
+	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
+#ifdef CONFIG_PCI_MMCONFIG
+	FIX_PCIE_MCFG,
+#endif
+	__end_of_permanent_fixed_addresses,
+	/* temporary boot-time mappings, used before ioremap() is functional */
+#define NR_FIX_BTMAPS	16
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS - 1,
+	FIX_WP_TEST,
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+		__set_fixmap(idx, 0, __pgprot(0))
+
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
+#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START	(__fix_to_virt(FIX_VSYSCALL))
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/include/asm-i386/floppy.h b/include/asm-i386/floppy.h
new file mode 100644
index 000000000000..f4782284807a
--- /dev/null
+++ b/include/asm-i386/floppy.h
@@ -0,0 +1,319 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_I386_FLOPPY_H
+#define __ASM_I386_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if (!doing_pdma)
+		return floppy_interrupt(irq, dev_id, regs);
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+#ifndef NO_FLOPPY_ASSEMBLER
+	__asm__ (
+       "testl %1,%1"
+	"je 3f"
+"1:	inb %w4,%b0"
+	"andb $160,%b0"
+	"cmpb $160,%b0"
+	"jne 2f"
+	"incw %w4"
+	"testl %3,%3"
+	"jne 4f"
+	"inb %w4,%b0"
+	"movb %0,(%2)"
+	"jmp 5f"
+"4:    	movb (%2),%0"
+	"outb %b0,%w4"
+"5:	decw %w4"
+	"outb %0,$0x80"
+	"decl %1"
+	"incl %2"
+	"testl %1,%1"
+	"jne 1b"
+"3:	inb %w4,%b0"
+"2:	"
+       : "=a" ((char) st), 
+       "=c" ((long) virtual_dma_count), 
+       "=S" ((long) virtual_dma_addr)
+       : "b" ((long) virtual_dma_mode),
+       "d" ((short) virtual_dma_port+4), 
+       "1" ((long) virtual_dma_count),
+       "2" ((long) virtual_dma_addr));
+#else	
+	{
+		register int lcount;
+		register char *lptr;
+
+		st = 1;
+		for(lcount=virtual_dma_count, lptr=virtual_dma_addr; 
+		    lcount; lcount--, lptr++) {
+			st=inb(virtual_dma_port+4) & 0xa0 ;
+			if(st != 0xa0) 
+				break;
+			if(virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port+5);
+			else
+				*lptr = inb_p(virtual_dma_port+5);
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port+4);
+	}
+#endif
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if(st == 0x20)
+		return IRQ_HANDLED;
+	if(!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+#ifdef TRACE_FLPY_INT
+	if(!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+	if(! (can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if(can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+						   SA_INTERRUPT|SA_SAMPLE_RANDOM,
+						   "floppy", NULL);	
+
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL,get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if((unsigned int) addr >= (unsigned int) high_memory)
+		vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));		
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if(can_use_virtual_dma == 2) {
+		if((unsigned int) addr >= (unsigned int) high_memory ||
+		   isa_virt_to_bus(addr) >= 0x1000000 ||
+		   _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char * device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc) (unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user.		Paul G.
+ */
+#define FLOPPY0_TYPE	({				\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = (CMOS_READ(0x10) >> 4) & 15;		\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define FLOPPY1_TYPE	({				\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = CMOS_READ(0x10) & 15;			\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define AUTO_DMA
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_I386_FLOPPY_H */
diff --git a/include/asm-i386/genapic.h b/include/asm-i386/genapic.h
new file mode 100644
index 000000000000..fc813b2e8274
--- /dev/null
+++ b/include/asm-i386/genapic.h
@@ -0,0 +1,115 @@
+#ifndef _ASM_GENAPIC_H
+#define _ASM_GENAPIC_H 1
+
+/*
+ * Generic APIC driver interface.
+ *
+ * An straight forward mapping of the APIC related parts of the
+ * x86 subarchitecture interface to a dynamic object.
+ *
+ * This is used by the "generic" x86 subarchitecture.
+ *
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ */
+
+struct mpc_config_translation;
+struct mpc_config_bus;
+struct mp_config_table;
+struct mpc_config_processor;
+
+struct genapic { 
+	char *name; 
+	int (*probe)(void); 
+
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	int int_delivery_mode;
+	int int_dest_mode; 
+	int ESR_DISABLE;
+	int apic_destination_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid); 
+	int no_balance_irq;
+	int no_ioapic_check;
+	void (*init_apic_ldr)(void);
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*clustered_apic_check)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid); 
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	int (*mpc_apic_id)(struct mpc_config_processor *m, 
+			   struct mpc_config_translation *t); 
+	void (*setup_portio_remap)(void); 
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+
+	/* mpparse */
+	void (*mpc_oem_bus_info)(struct mpc_config_bus *, char *, 
+				 struct mpc_config_translation *);
+	void (*mpc_oem_pci_bus)(struct mpc_config_bus *, 
+				struct mpc_config_translation *); 
+
+	/* When one of the next two hooks returns 1 the genapic
+	   is switched to this. Essentially they are additional probe 
+	   functions. */
+	int (*mps_oem_check)(struct mp_config_table *mpc, char *oem, 
+			      char *productid);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+
+	unsigned (*get_apic_id)(unsigned long x);
+	unsigned long apic_id_mask;
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+}; 
+
+#define APICFUNC(x) .x = x
+
+#define APIC_INIT(aname, aprobe) { \
+	.name = aname, \
+	.probe = aprobe, \
+	.int_delivery_mode = INT_DELIVERY_MODE, \
+	.int_dest_mode = INT_DEST_MODE, \
+	.no_balance_irq = NO_BALANCE_IRQ, \
+	.no_ioapic_check = NO_IOAPIC_CHECK, \
+	.ESR_DISABLE = esr_disable, \
+	.apic_destination_logical = APIC_DEST_LOGICAL, \
+	APICFUNC(apic_id_registered), \
+	APICFUNC(target_cpus), \
+	APICFUNC(check_apicid_used), \
+	APICFUNC(check_apicid_present), \
+	APICFUNC(init_apic_ldr), \
+	APICFUNC(ioapic_phys_id_map), \
+	APICFUNC(clustered_apic_check), \
+	APICFUNC(multi_timer_check), \
+	APICFUNC(apicid_to_node), \
+	APICFUNC(cpu_to_logical_apicid), \
+	APICFUNC(cpu_present_to_apicid), \
+	APICFUNC(apicid_to_cpu_present), \
+	APICFUNC(mpc_apic_id), \
+	APICFUNC(setup_portio_remap), \
+	APICFUNC(check_phys_apicid_present), \
+	APICFUNC(mpc_oem_bus_info), \
+	APICFUNC(mpc_oem_pci_bus), \
+	APICFUNC(mps_oem_check), \
+	APICFUNC(get_apic_id), \
+	.apic_id_mask = APIC_ID_MASK, \
+	APICFUNC(cpu_mask_to_apicid), \
+	APICFUNC(acpi_madt_oem_check), \
+	APICFUNC(send_IPI_mask), \
+	APICFUNC(send_IPI_allbutself), \
+	APICFUNC(send_IPI_all), \
+	APICFUNC(enable_apic_mode), \
+	APICFUNC(phys_pkg_id), \
+	}
+
+extern struct genapic *genapic;
+
+#endif
diff --git a/include/asm-i386/hardirq.h b/include/asm-i386/hardirq.h
new file mode 100644
index 000000000000..ee754d359734
--- /dev/null
+++ b/include/asm-i386/hardirq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned long idle_timestamp;
+	unsigned int __nmi_count;	/* arch dependent */
+	unsigned int apic_timer_irqs;	/* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+extern irq_cpustat_t irq_stat[];
+
+#define __ARCH_IRQ_STAT
+#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+
+void ack_bad_irq(unsigned int irq);
+#include <linux/irq_cpustat.h>
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-i386/hdreg.h b/include/asm-i386/hdreg.h
new file mode 100644
index 000000000000..5989bbc97cbf
--- /dev/null
+++ b/include/asm-i386/hdreg.h
@@ -0,0 +1 @@
+#warning this file is obsolete, please do not use it
diff --git a/include/asm-i386/highmem.h b/include/asm-i386/highmem.h
new file mode 100644
index 000000000000..1df42bf347df
--- /dev/null
+++ b/include/asm-i386/highmem.h
@@ -0,0 +1,79 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+/*
+ * Ordering is:
+ *
+ * FIXADDR_TOP
+ * 			fixed_addresses
+ * FIXADDR_START
+ * 			temp fixed addresses
+ * FIXADDR_BOOT_START
+ * 			Persistent kmap area
+ * PKMAP_BASE
+ * VMALLOC_END
+ * 			Vmalloc area
+ * VMALLOC_START
+ * high_memory
+ */
+#define PKMAP_BASE ( (FIXADDR_BOOT_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK )
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void * FASTCALL(kmap_high(struct page *page));
+extern void FASTCALL(kunmap_high(struct page *page));
+
+void *kmap(struct page *page);
+void kunmap(struct page *page);
+void *kmap_atomic(struct page *page, enum km_type type);
+void kunmap_atomic(void *kvaddr, enum km_type type);
+struct page *kmap_atomic_to_page(void *ptr);
+
+#define flush_cache_kmaps()	do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-i386/hpet.h b/include/asm-i386/hpet.h
new file mode 100644
index 000000000000..6e20b079f1d3
--- /dev/null
+++ b/include/asm-i386/hpet.h
@@ -0,0 +1,113 @@
+
+#ifndef _I386_HPET_H
+#define _I386_HPET_H
+
+#ifdef CONFIG_HPET_TIMER
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/fixmap.h>
+
+/*
+ * Documentation on HPET can be found at:
+ *      http://www.intel.com/ial/home/sp/pcmmspec.htm
+ *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_MMAP_SIZE	1024
+
+#define HPET_ID		0x000
+#define HPET_PERIOD	0x004
+#define HPET_CFG	0x010
+#define HPET_STATUS	0x020
+#define HPET_COUNTER	0x0f0
+#define HPET_T0_CFG	0x100
+#define HPET_T0_CMP	0x108
+#define HPET_T0_ROUTE	0x110
+#define HPET_T1_CFG	0x120
+#define HPET_T1_CMP	0x128
+#define HPET_T1_ROUTE	0x130
+#define HPET_T2_CFG	0x140
+#define HPET_T2_CMP	0x148
+#define HPET_T2_ROUTE	0x150
+
+#define HPET_ID_LEGSUP	0x00008000
+#define HPET_ID_NUMBER	0x00001f00
+#define HPET_ID_REV	0x000000ff
+#define	HPET_ID_NUMBER_SHIFT	8
+
+#define HPET_CFG_ENABLE	0x001
+#define HPET_CFG_LEGACY	0x002
+#define	HPET_LEGACY_8254	2
+#define	HPET_LEGACY_RTC		8
+
+#define HPET_TN_ENABLE		0x004
+#define HPET_TN_PERIODIC	0x008
+#define HPET_TN_PERIODIC_CAP	0x010
+#define HPET_TN_SETVAL		0x040
+#define HPET_TN_32BIT		0x100
+
+/* Use our own asm for 64 bit multiply/divide */
+#define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) 			\
+		__asm__ __volatile__("mull %2" 				\
+				:"=a" (eax_out), "=d" (edx_out) 	\
+				:"r" (reg_in), "0" (eax_in))
+
+#define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) 		\
+		__asm__ __volatile__("divl %2" 				\
+				:"=a" (eax_out), "=d" (edx_out) 	\
+				:"r" (reg_in), "0" (eax_in), "1" (edx_in))
+
+#define KERNEL_TICK_USEC 	(1000000UL/HZ)	/* tick value in microsec */
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD (100000000UL)
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD (100000UL)
+
+extern unsigned long hpet_tick;  	/* hpet clks count per tick */
+extern unsigned long hpet_address;	/* hpet memory map physical address */
+
+extern int hpet_rtc_timer_init(void);
+extern int hpet_enable(void);
+extern int hpet_reenable(void);
+extern int is_hpet_enabled(void);
+extern int is_hpet_capable(void);
+extern int hpet_readl(unsigned long a);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+#endif /* CONFIG_HPET_EMULATE_RTC */
+#endif /* CONFIG_HPET_TIMER */
+#endif /* _I386_HPET_H */
diff --git a/include/asm-i386/hw_irq.h b/include/asm-i386/hw_irq.h
new file mode 100644
index 000000000000..4ac84cc6f01a
--- /dev/null
+++ b/include/asm-i386/hw_irq.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+/*
+ *	linux/include/asm/hw_irq.h
+ *
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#include <linux/config.h>
+#include <linux/profile.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+
+/*
+ * Various low-level irq details needed by irq.c, process.c,
+ * time.c, io_apic.c and smp.c
+ *
+ * Interrupt entry/exit code at both C and assembly level
+ */
+
+extern u8 irq_vector[NR_IRQ_VECTORS];
+#define IO_APIC_VECTOR(irq)	(irq_vector[irq])
+#define AUTO_ASSIGN		-1
+
+extern void (*interrupt[NR_IRQS])(void);
+
+#ifdef CONFIG_SMP
+fastcall void reschedule_interrupt(void);
+fastcall void invalidate_interrupt(void);
+fastcall void call_function_interrupt(void);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+fastcall void apic_timer_interrupt(void);
+fastcall void error_interrupt(void);
+fastcall void spurious_interrupt(void);
+fastcall void thermal_interrupt(struct pt_regs *);
+#define platform_legacy_irq(irq)	((irq) < 16)
+#endif
+
+void disable_8259A_irq(unsigned int irq);
+void enable_8259A_irq(unsigned int irq);
+int i8259A_irq_pending(unsigned int irq);
+void make_8259A_irq(unsigned int irq);
+void init_8259A(int aeoi);
+void FASTCALL(send_IPI_self(int vector));
+void init_VISWS_APIC_irqs(void);
+void setup_IO_APIC(void);
+void disable_IO_APIC(void);
+void print_IO_APIC(void);
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+void send_IPI(int dest, int vector);
+void setup_ioapic_dest(void);
+
+extern unsigned long io_apic_irqs;
+
+extern atomic_t irq_err_count;
+extern atomic_t irq_mis_count;
+
+#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+
+#if defined(CONFIG_X86_IO_APIC)
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+	if (IO_APIC_IRQ(i))
+		send_IPI_self(IO_APIC_VECTOR(i));
+}
+#else
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+#endif
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-i386/i387.h b/include/asm-i386/i387.h
new file mode 100644
index 000000000000..f6feb98a9397
--- /dev/null
+++ b/include/asm-i386/i387.h
@@ -0,0 +1,115 @@
+/*
+ * include/asm-i386/i387.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+#ifndef __ASM_I386_I387_H
+#define __ASM_I386_I387_H
+
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+extern void mxcsr_feature_mask_init(void);
+extern void init_fpu(struct task_struct *);
+/*
+ * FPU lazy state save handling...
+ */
+extern void restore_fpu( struct task_struct *tsk );
+
+extern void kernel_fpu_begin(void);
+#define kernel_fpu_end() do { stts(); preempt_enable(); } while(0)
+
+/*
+ * These must be called with preempt disabled
+ */
+static inline void __save_init_fpu( struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		asm volatile( "fxsave %0 ; fnclex"
+			      : "=m" (tsk->thread.i387.fxsave) );
+	} else {
+		asm volatile( "fnsave %0 ; fwait"
+			      : "=m" (tsk->thread.i387.fsave) );
+	}
+	tsk->thread_info->status &= ~TS_USEDFPU;
+}
+
+#define __unlazy_fpu( tsk ) do { \
+	if ((tsk)->thread_info->status & TS_USEDFPU) \
+		save_init_fpu( tsk ); \
+} while (0)
+
+#define __clear_fpu( tsk )					\
+do {								\
+	if ((tsk)->thread_info->status & TS_USEDFPU) {		\
+		asm volatile("fnclex ; fwait");				\
+		(tsk)->thread_info->status &= ~TS_USEDFPU;	\
+		stts();						\
+	}							\
+} while (0)
+
+
+/*
+ * These disable preemption on their own and are safe
+ */
+static inline void save_init_fpu( struct task_struct *tsk )
+{
+	preempt_disable();
+	__save_init_fpu(tsk);
+	stts();
+	preempt_enable();
+}
+
+#define unlazy_fpu( tsk ) do {	\
+	preempt_disable();	\
+	__unlazy_fpu(tsk);	\
+	preempt_enable();	\
+} while (0)
+
+#define clear_fpu( tsk ) do {	\
+	preempt_disable();	\
+	__clear_fpu( tsk );	\
+	preempt_enable();	\
+} while (0)
+					\
+/*
+ * FPU state interaction...
+ */
+extern unsigned short get_fpu_cwd( struct task_struct *tsk );
+extern unsigned short get_fpu_swd( struct task_struct *tsk );
+extern unsigned short get_fpu_mxcsr( struct task_struct *tsk );
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387( struct _fpstate __user *buf );
+extern int restore_i387( struct _fpstate __user *buf );
+
+/*
+ * ptrace request handers...
+ */
+extern int get_fpregs( struct user_i387_struct __user *buf,
+		       struct task_struct *tsk );
+extern int set_fpregs( struct task_struct *tsk,
+		       struct user_i387_struct __user *buf );
+
+extern int get_fpxregs( struct user_fxsr_struct __user *buf,
+			struct task_struct *tsk );
+extern int set_fpxregs( struct task_struct *tsk,
+			struct user_fxsr_struct __user *buf );
+
+/*
+ * FPU state for core dumps...
+ */
+extern int dump_fpu( struct pt_regs *regs,
+		     struct user_i387_struct *fpu );
+
+#endif /* __ASM_I386_I387_H */
diff --git a/include/asm-i386/i8259.h b/include/asm-i386/i8259.h
new file mode 100644
index 000000000000..29d8f9a6b3fc
--- /dev/null
+++ b/include/asm-i386/i8259.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_I8259_H__
+#define __ASM_I8259_H__
+
+extern unsigned int cached_irq_mask;
+
+#define __byte(x,y) 		(((unsigned char *) &(y))[x])
+#define cached_master_mask	(__byte(0, cached_irq_mask))
+#define cached_slave_mask	(__byte(1, cached_irq_mask))
+
+extern spinlock_t i8259A_lock;
+
+extern void init_8259A(int auto_eoi);
+extern void enable_8259A_irq(unsigned int irq);
+extern void disable_8259A_irq(unsigned int irq);
+extern unsigned int startup_8259A_irq(unsigned int irq);
+
+#endif	/* __ASM_I8259_H__ */
diff --git a/include/asm-i386/ide.h b/include/asm-i386/ide.h
new file mode 100644
index 000000000000..859ebf4da632
--- /dev/null
+++ b/include/asm-i386/ide.h
@@ -0,0 +1,69 @@
+/*
+ *  linux/include/asm-i386/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the i386 architecture specific IDE code.
+ */
+
+#ifndef __ASMi386_IDE_H
+#define __ASMi386_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_BLK_DEV_IDEPCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	6
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static __inline__ int ide_default_irq(unsigned long base)
+{
+	switch (base) {
+		case 0x1f0: return 14;
+		case 0x170: return 15;
+		case 0x1e8: return 11;
+		case 0x168: return 10;
+		case 0x1e0: return 8;
+		case 0x160: return 12;
+		default:
+			return 0;
+	}
+}
+
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+	switch (index) {
+		case 0:	return 0x1f0;
+		case 1:	return 0x170;
+		case 2: return 0x1e8;
+		case 3: return 0x168;
+		case 4: return 0x1e0;
+		case 5: return 0x160;
+		default:
+			return 0;
+	}
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_BLK_DEV_IDEPCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMi386_IDE_H */
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
new file mode 100644
index 000000000000..7babb97a02eb
--- /dev/null
+++ b/include/asm-i386/io.h
@@ -0,0 +1,381 @@
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc. 
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+ 
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address. 
+ */
+
+static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, 0);
+}
+
+extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size);
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * bt_ioremap() and bt_iounmap() are for temporary early boot-time
+ * mappings, before the real ioremap() is functional.
+ * A boot-time mapping is currently limited to at most 16 pages.
+ */
+extern void *bt_ioremap(unsigned long offset, unsigned long size);
+extern void bt_iounmap(void *addr, unsigned long size);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *) addr;
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *) addr;
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = b;
+}
+static inline void writew(unsigned short b, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = b;
+}
+static inline void writel(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = b;
+}
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define mmiowb()
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	__memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	__memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+#define isa_readb(a) readb(__ISA_IO_base + (a))
+#define isa_readw(a) readw(__ISA_IO_base + (a))
+#define isa_readl(a) readl(__ISA_IO_base + (a))
+#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a))
+#define isa_writew(w,a) writew(w,__ISA_IO_base + (a))
+#define isa_writel(l,a) writel(l,__ISA_IO_base + (a))
+#define isa_memset_io(a,b,c)		memset_io(__ISA_IO_base + (a),(b),(c))
+#define isa_memcpy_fromio(a,b,c)	memcpy_fromio((a),__ISA_IO_base + (b),(c))
+#define isa_memcpy_toio(a,b,c)		memcpy_toio(__ISA_IO_base + (a),(b),(c))
+
+
+/*
+ * Again, i386 does not require mem IO specific function.
+ */
+
+#define eth_io_copy_and_sum(a,b,c,d)		eth_copy_and_sum((a),(void __force *)(b),(c),(d))
+#define isa_eth_io_copy_and_sum(a,b,c,d)	eth_copy_and_sum((a),(void __force *)(__ISA_IO_base + (b)),(c),(d))
+
+/**
+ *	check_signature		-	find BIOS signatures
+ *	@io_addr: mmio address to check 
+ *	@signature:  signature block
+ *	@length: length of signature
+ *
+ *	Perform a signature comparison with the mmio address io_addr. This
+ *	address should have been obtained by ioremap.
+ *	Returns 1 on a match.
+ */
+ 
+static inline int check_signature(volatile void __iomem * io_addr,
+	const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/*
+ *	Cache management
+ *
+ *	This needed for two cases
+ *	1. Out of order aware processors
+ *	2. Accidentally out of order processors (PPro errata #51)
+ */
+ 
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+
+static inline void flush_write_buffers(void)
+{
+	__asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory");
+}
+
+#define dma_cache_inv(_start,_size)		flush_write_buffers()
+#define dma_cache_wback(_start,_size)		flush_write_buffers()
+#define dma_cache_wback_inv(_start,_size)	flush_write_buffers()
+
+#else
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+#define flush_write_buffers()
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#ifdef SLOW_IO_BY_JUMPING
+#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
+#else
+#define __SLOW_DOWN_IO "outb %%al,$0x80;"
+#endif
+
+static inline void slow_down_io(void) {
+	__asm__ __volatile__(
+		__SLOW_DOWN_IO
+#ifdef REALLY_SLOW_IO
+		__SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+		: : );
+}
+
+#ifdef CONFIG_X86_NUMAQ
+extern void *xquad_portio;    /* Where the IO area was mapped */
+#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
+#define __BUILDIO(bwl,bw,type) \
+static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \
+	if (xquad_portio) \
+		write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \
+	else \
+		out##bwl##_local(value, port); \
+} \
+static inline void out##bwl(unsigned type value, int port) { \
+	out##bwl##_quad(value, port, 0); \
+} \
+static inline unsigned type in##bwl##_quad(int port, int quad) { \
+	if (xquad_portio) \
+		return read##bwl(XQUAD_PORT_ADDR(port, quad)); \
+	else \
+		return in##bwl##_local(port); \
+} \
+static inline unsigned type in##bwl(int port) { \
+	return in##bwl##_quad(port, 0); \
+}
+#else
+#define __BUILDIO(bwl,bw,type) \
+static inline void out##bwl(unsigned type value, int port) { \
+	out##bwl##_local(value, port); \
+} \
+static inline unsigned type in##bwl(int port) { \
+	return in##bwl##_local(port); \
+}
+#endif
+
+
+#define BUILDIO(bwl,bw,type) \
+static inline void out##bwl##_local(unsigned type value, int port) { \
+	__asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \
+} \
+static inline unsigned type in##bwl##_local(int port) { \
+	unsigned type value; \
+	__asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \
+	return value; \
+} \
+static inline void out##bwl##_local_p(unsigned type value, int port) { \
+	out##bwl##_local(value, port); \
+	slow_down_io(); \
+} \
+static inline unsigned type in##bwl##_local_p(int port) { \
+	unsigned type value = in##bwl##_local(port); \
+	slow_down_io(); \
+	return value; \
+} \
+__BUILDIO(bwl,bw,type) \
+static inline void out##bwl##_p(unsigned type value, int port) { \
+	out##bwl(value, port); \
+	slow_down_io(); \
+} \
+static inline unsigned type in##bwl##_p(int port) { \
+	unsigned type value = in##bwl(port); \
+	slow_down_io(); \
+	return value; \
+} \
+static inline void outs##bwl(int port, const void *addr, unsigned long count) { \
+	__asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \
+} \
+static inline void ins##bwl(int port, void *addr, unsigned long count) { \
+	__asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \
+}
+
+BUILDIO(b,b,char)
+BUILDIO(w,w,short)
+BUILDIO(l,,int)
+
+#endif
diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h
new file mode 100644
index 000000000000..002c203ccd6a
--- /dev/null
+++ b/include/asm-i386/io_apic.h
@@ -0,0 +1,213 @@
+#ifndef __ASM_IO_APIC_H
+#define __ASM_IO_APIC_H
+
+#include <linux/config.h>
+#include <asm/types.h>
+#include <asm/mpspec.h>
+
+/*
+ * Intel IO-APIC support for SMP and UP systems.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
+ */
+
+#ifdef CONFIG_X86_IO_APIC
+
+#ifdef CONFIG_PCI_MSI
+static inline int use_pci_vector(void)	{return 1;}
+static inline void disable_edge_ioapic_vector(unsigned int vector) { }
+static inline void mask_and_ack_level_ioapic_vector(unsigned int vector) { }
+static inline void end_edge_ioapic_vector (unsigned int vector) { }
+#define startup_level_ioapic	startup_level_ioapic_vector
+#define shutdown_level_ioapic	mask_IO_APIC_vector
+#define enable_level_ioapic	unmask_IO_APIC_vector
+#define disable_level_ioapic	mask_IO_APIC_vector
+#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_vector
+#define end_level_ioapic	end_level_ioapic_vector
+#define set_ioapic_affinity	set_ioapic_affinity_vector
+
+#define startup_edge_ioapic 	startup_edge_ioapic_vector
+#define shutdown_edge_ioapic 	disable_edge_ioapic_vector
+#define enable_edge_ioapic 	unmask_IO_APIC_vector
+#define disable_edge_ioapic 	disable_edge_ioapic_vector
+#define ack_edge_ioapic 	ack_edge_ioapic_vector
+#define end_edge_ioapic 	end_edge_ioapic_vector
+#else
+static inline int use_pci_vector(void)	{return 0;}
+static inline void disable_edge_ioapic_irq(unsigned int irq) { }
+static inline void mask_and_ack_level_ioapic_irq(unsigned int irq) { }
+static inline void end_edge_ioapic_irq (unsigned int irq) { }
+#define startup_level_ioapic	startup_level_ioapic_irq
+#define shutdown_level_ioapic	mask_IO_APIC_irq
+#define enable_level_ioapic	unmask_IO_APIC_irq
+#define disable_level_ioapic	mask_IO_APIC_irq
+#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_irq
+#define end_level_ioapic	end_level_ioapic_irq
+#define set_ioapic_affinity	set_ioapic_affinity_irq
+
+#define startup_edge_ioapic 	startup_edge_ioapic_irq
+#define shutdown_edge_ioapic 	disable_edge_ioapic_irq
+#define enable_edge_ioapic 	unmask_IO_APIC_irq
+#define disable_edge_ioapic 	disable_edge_ioapic_irq
+#define ack_edge_ioapic 	ack_edge_ioapic_irq
+#define end_edge_ioapic 	end_edge_ioapic_irq
+#endif
+
+#define IO_APIC_BASE(idx) \
+		((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
+		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
+
+/*
+ * The structure of the IO-APIC:
+ */
+union IO_APIC_reg_00 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 14,
+			LTS		:  1,
+			delivery_type	:  1,
+			__reserved_1	:  8,
+			ID		:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_01 {
+	u32	raw;
+	struct {
+		u32	version		:  8,
+			__reserved_2	:  7,
+			PRQ		:  1,
+			entries		:  8,
+			__reserved_1	:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_02 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 24,
+			arbitration	:  4,
+			__reserved_1	:  4;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_03 {
+	u32	raw;
+	struct {
+		u32	boot_DT		:  1,
+			__reserved_1	: 31;
+	} __attribute__ ((packed)) bits;
+};
+
+/*
+ * # of IO-APICs and # of IRQ routing registers
+ */
+extern int nr_ioapics;
+extern int nr_ioapic_registers[MAX_IO_APICS];
+
+enum ioapic_irq_destination_types {
+	dest_Fixed = 0,
+	dest_LowestPrio = 1,
+	dest_SMI = 2,
+	dest__reserved_1 = 3,
+	dest_NMI = 4,
+	dest_INIT = 5,
+	dest__reserved_2 = 6,
+	dest_ExtINT = 7
+};
+
+struct IO_APIC_route_entry {
+	__u32	vector		:  8,
+		delivery_mode	:  3,	/* 000: FIXED
+					 * 001: lowest prio
+					 * 111: ExtINT
+					 */
+		dest_mode	:  1,	/* 0: physical, 1: logical */
+		delivery_status	:  1,
+		polarity	:  1,
+		irr		:  1,
+		trigger		:  1,	/* 0: edge, 1: level */
+		mask		:  1,	/* 0: enabled, 1: disabled */
+		__reserved_2	: 15;
+
+	union {		struct { __u32
+					__reserved_1	: 24,
+					physical_dest	:  4,
+					__reserved_2	:  4;
+			} physical;
+
+			struct { __u32
+					__reserved_1	: 24,
+					logical_dest	:  8;
+			} logical;
+	} dest;
+
+} __attribute__ ((packed));
+
+/*
+ * MP-BIOS irq configuration table structures:
+ */
+
+/* I/O APIC entries */
+extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+extern int mp_irq_entries;
+
+/* MP IRQ source entries */
+extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* non-0 if default (table-less) MP configuration */
+extern int mpc_default_type;
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+	*IO_APIC_BASE(apic) = reg;
+	return *(IO_APIC_BASE(apic)+4);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	*IO_APIC_BASE(apic) = reg;
+	*(IO_APIC_BASE(apic)+4) = value;
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ *
+ * Older SiS APIC requires we rewrite the index regiser
+ */
+extern int sis_apic_bug;
+static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	if (sis_apic_bug)
+		*IO_APIC_BASE(apic) = reg;
+	*(IO_APIC_BASE(apic)+4) = value;
+}
+
+/* 1 if "noapic" boot option passed */
+extern int skip_ioapic_setup;
+
+/*
+ * If we use the IO-APIC for IRQ routing, disable automatic
+ * assignment of PCI IRQ's.
+ */
+#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
+
+#ifdef CONFIG_ACPI_BOOT
+extern int io_apic_get_unique_id (int ioapic, int apic_id);
+extern int io_apic_get_version (int ioapic);
+extern int io_apic_get_redir_entries (int ioapic);
+extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low);
+#endif /*CONFIG_ACPI_BOOT*/
+
+extern int (*ioapic_renumber_irq)(int ioapic, int irq);
+
+#else  /* !CONFIG_X86_IO_APIC */
+#define io_apic_assign_pci_irqs 0
+#endif
+
+extern int assign_irq_vector(int irq);
+
+#endif
diff --git a/include/asm-i386/ioctl.h b/include/asm-i386/ioctl.h
new file mode 100644
index 000000000000..543f7843d553
--- /dev/null
+++ b/include/asm-i386/ioctl.h
@@ -0,0 +1,85 @@
+/* $Id: ioctl.h,v 1.5 1993/07/19 21:53:50 root Exp root $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASMI386_IOCTL_H
+#define _ASMI386_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASMI386_IOCTL_H */
diff --git a/include/asm-i386/ioctls.h b/include/asm-i386/ioctls.h
new file mode 100644
index 000000000000..f962fadab0fa
--- /dev/null
+++ b/include/asm-i386/ioctls.h
@@ -0,0 +1,83 @@
+#ifndef __ARCH_I386_IOCTLS_H__
+#define __ARCH_I386_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-i386/ipc.h b/include/asm-i386/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-i386/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-i386/ipcbuf.h b/include/asm-i386/ipcbuf.h
new file mode 100644
index 000000000000..0dcad4f84c2a
--- /dev/null
+++ b/include/asm-i386/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __i386_IPCBUF_H__
+#define __i386_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __i386_IPCBUF_H__ */
diff --git a/include/asm-i386/irq.h b/include/asm-i386/irq.h
new file mode 100644
index 000000000000..05b9e61b0a72
--- /dev/null
+++ b/include/asm-i386/irq.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+/*
+ *	linux/include/asm/irq.h
+ *
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+/* include comes from machine specific directory */
+#include "irq_vectors.h"
+#include <asm/thread_info.h>
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void release_vm86_irqs(struct task_struct *);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# define ARCH_HAS_NMI_WATCHDOG		/* See include/linux/nmi.h */
+#endif
+
+#ifdef CONFIG_4KSTACKS
+  extern void irq_ctx_init(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_IRQBALANCE
+extern int irqbalance_disable(char *str);
+#endif
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-i386/ist.h b/include/asm-i386/ist.h
new file mode 100644
index 000000000000..d13d1e68afa9
--- /dev/null
+++ b/include/asm-i386/ist.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_IST_H
+#define _ASM_IST_H
+
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+
+#ifdef __KERNEL__
+
+struct ist_info {
+	unsigned long	signature;
+	unsigned long	command;
+	unsigned long	event;
+	unsigned long	perf_level;
+};
+
+extern struct ist_info ist_info;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_IST_H */
diff --git a/include/asm-i386/kdebug.h b/include/asm-i386/kdebug.h
new file mode 100644
index 000000000000..de6498b0d493
--- /dev/null
+++ b/include/asm-i386/kdebug.h
@@ -0,0 +1,50 @@
+#ifndef _I386_KDEBUG_H
+#define _I386_KDEBUG_H 1
+
+/*
+ * Aug-05 2004 Ported by Prasanna S Panchamukhi <prasanna@in.ibm.com>
+ * from x86_64 architecture.
+ */
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args {
+	struct pt_regs *regs;
+	const char *str;
+	long err;
+	int trapnr;
+	int signr;
+};
+
+/* Note - you should never unregister because that can race with NMIs.
+   If you really want to do it first unregister - then synchronize_kernel - then free.
+  */
+int register_die_notifier(struct notifier_block *nb);
+extern struct notifier_block *i386die_chain;
+
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_INT3,
+	DIE_DEBUG,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+	DIE_PAGE_FAULT,
+};
+
+static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
+{
+	struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig };
+	return notifier_call_chain(&i386die_chain, val, &args);
+}
+
+#endif
diff --git a/include/asm-i386/kmap_types.h b/include/asm-i386/kmap_types.h
new file mode 100644
index 000000000000..6886a0c3fedf
--- /dev/null
+++ b/include/asm-i386/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-i386/kprobes.h b/include/asm-i386/kprobes.h
new file mode 100644
index 000000000000..4092f68d123a
--- /dev/null
+++ b/include/asm-i386/kprobes.h
@@ -0,0 +1,69 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *  include/asm-i386/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct pt_regs;
+
+typedef u8 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xcc
+#define MAX_INSN_SIZE 16
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)pentry
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+
+/* trap3/1 are intr gates for kprobes.  So, restore the status of IF,
+ * if necessary, before executing the original int3/1 (trap) handler.
+ */
+static inline void restore_interrupts(struct pt_regs *regs)
+{
+	if (regs->eflags & IF_MASK)
+		local_irq_enable();
+}
+
+#ifdef CONFIG_KPROBES
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#else				/* !CONFIG_KPROBES */
+static inline int kprobe_exceptions_notify(struct notifier_block *self,
+					   unsigned long val, void *data)
+{
+	return 0;
+}
+#endif
+#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-i386/ldt.h b/include/asm-i386/ldt.h
new file mode 100644
index 000000000000..e9d3de1dee6c
--- /dev/null
+++ b/include/asm-i386/ldt.h
@@ -0,0 +1,32 @@
+/*
+ * ldt.h
+ *
+ * Definitions of structures used with the modify_ldt system call.
+ */
+#ifndef _LINUX_LDT_H
+#define _LINUX_LDT_H
+
+/* Maximum number of LDT entries supported. */
+#define LDT_ENTRIES	8192
+/* The size of each LDT entry. */
+#define LDT_ENTRY_SIZE	8
+
+#ifndef __ASSEMBLY__
+struct user_desc {
+	unsigned int  entry_number;
+	unsigned long base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+};
+
+#define MODIFY_LDT_CONTENTS_DATA	0
+#define MODIFY_LDT_CONTENTS_STACK	1
+#define MODIFY_LDT_CONTENTS_CODE	2
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/include/asm-i386/linkage.h b/include/asm-i386/linkage.h
new file mode 100644
index 000000000000..af3d8571c5c7
--- /dev/null
+++ b/include/asm-i386/linkage.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
+#define FASTCALL(x)	x __attribute__((regparm(3)))
+#define fastcall	__attribute__((regparm(3)))
+
+#ifdef CONFIG_REGPARM
+# define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
+#endif
+
+#ifdef CONFIG_X86_ALIGNMENT_16
+#define __ALIGN .align 16,0x90
+#define __ALIGN_STR ".align 16,0x90"
+#endif
+
+#endif
diff --git a/include/asm-i386/local.h b/include/asm-i386/local.h
new file mode 100644
index 000000000000..0177da80dde3
--- /dev/null
+++ b/include/asm-i386/local.h
@@ -0,0 +1,70 @@
+#ifndef _ARCH_I386_LOCAL_H
+#define _ARCH_I386_LOCAL_H
+
+#include <linux/percpu.h>
+
+typedef struct
+{
+	volatile unsigned long counter;
+} local_t;
+
+#define LOCAL_INIT(i)	{ (i) }
+
+#define local_read(v)	((v)->counter)
+#define local_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ void local_inc(local_t *v)
+{
+	__asm__ __volatile__(
+		"incl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+static __inline__ void local_dec(local_t *v)
+{
+	__asm__ __volatile__(
+		"decl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+static __inline__ void local_add(unsigned long i, local_t *v)
+{
+	__asm__ __volatile__(
+		"addl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+static __inline__ void local_sub(unsigned long i, local_t *v)
+{
+	__asm__ __volatile__(
+		"subl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/* On x86, these are no better than the atomic variants. */
+#define __local_inc(l)		local_inc(l)
+#define __local_dec(l)		local_dec(l)
+#define __local_add(i,l)	local_add((i),(l))
+#define __local_sub(i,l)	local_sub((i),(l))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	cpu_local_inc(v)
+#define __cpu_local_dec(v)	cpu_local_dec(v)
+#define __cpu_local_add(i, v)	cpu_local_add((i), (v))
+#define __cpu_local_sub(i, v)	cpu_local_sub((i), (v))
+
+#endif /* _ARCH_I386_LOCAL_H */
diff --git a/include/asm-i386/mach-bigsmp/mach_apic.h b/include/asm-i386/mach-bigsmp/mach_apic.h
new file mode 100644
index 000000000000..2339868270ef
--- /dev/null
+++ b/include/asm-i386/mach-bigsmp/mach_apic.h
@@ -0,0 +1,167 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+#include <asm/smp.h>
+
+#define SEQUENTIAL_APICID
+#ifdef SEQUENTIAL_APICID
+#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\
+		((phys_apic<<2) & (~0xf)) )
+#elif CLUSTERED_APICID
+#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\
+		((phys_apic) & (~0xf)) )
+#endif
+
+#define NO_BALANCE_IRQ (1)
+#define esr_disable (1)
+
+#define NO_IOAPIC_CHECK (0)
+
+static inline int apic_id_registered(void)
+{
+	return (1);
+}
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+/* Round robin the irqs amoung the online cpus */
+static inline cpumask_t target_cpus(void)
+{ 
+	static unsigned long cpu = NR_CPUS;
+	do {
+		if (cpu >= NR_CPUS)
+			cpu = first_cpu(cpu_online_map);
+		else
+			cpu = next_cpu(cpu, cpu_online_map);
+	} while (cpu >= NR_CPUS);
+	return cpumask_of_cpu(cpu);
+}
+#define TARGET_CPUS	(target_cpus())
+
+#define INT_DELIVERY_MODE dest_Fixed
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long check_apicid_present(int bit) 
+{
+	return 1;
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(unsigned long old)
+{
+	unsigned long id;
+	id = xapic_phys_to_log_apicid(hard_smp_processor_id());
+	return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val = calculate_ldr(val);
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"Cluster", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+extern u8 bios_cpu_apicid[];
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int)bios_cpu_apicid[mps_cpu];
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+       return (int)cpu_2_logical_apicid[cpu];
+ }
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+			struct mpc_config_translation *translation_record)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+	        m->mpc_apicid,
+	        (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	        (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	        m->mpc_apicver);
+	return m->mpc_apicid;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+#define WAKE_SECONDARY_VIA_INIT
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+	int apicid;	
+
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-bigsmp/mach_apicdef.h b/include/asm-i386/mach-bigsmp/mach_apicdef.h
new file mode 100644
index 000000000000..23e58b317c79
--- /dev/null
+++ b/include/asm-i386/mach-bigsmp/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0x0F<<24)
+
+static inline unsigned get_apic_id(unsigned long x) 
+{ 
+	return (((x)>>24)&0x0F);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-bigsmp/mach_ipi.h b/include/asm-i386/mach-bigsmp/mach_ipi.h
new file mode 100644
index 000000000000..9404c535b7ec
--- /dev/null
+++ b/include/asm-i386/mach-bigsmp/mach_ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-bigsmp/mach_mpspec.h b/include/asm-i386/mach-bigsmp/mach_mpspec.h
new file mode 100644
index 000000000000..6b5dadcf1d0e
--- /dev/null
+++ b/include/asm-i386/mach-bigsmp/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#define MAX_MP_BUSSES 32
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-default/apm.h b/include/asm-i386/mach-default/apm.h
new file mode 100644
index 000000000000..1f730b8bd1fd
--- /dev/null
+++ b/include/asm-i386/mach-default/apm.h
@@ -0,0 +1,75 @@
+/*
+ *  include/asm-i386/mach-default/apm.h
+ *
+ *  Machine specific APM BIOS functions for generic.
+ *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_APM_H
+#define _ASM_APM_H
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DO_ZERO_SEGS \
+		"pushl %%ds\n\t" \
+		"pushl %%es\n\t" \
+		"xorl %%edx, %%edx\n\t" \
+		"mov %%dx, %%ds\n\t" \
+		"mov %%dx, %%es\n\t" \
+		"mov %%dx, %%fs\n\t" \
+		"mov %%dx, %%gs\n\t"
+#	define APM_DO_POP_SEGS \
+		"popl %%es\n\t" \
+		"popl %%ds\n\t"
+#else
+#	define APM_DO_ZERO_SEGS
+#	define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+					u32 *eax, u32 *ebx, u32 *ecx,
+					u32 *edx, u32 *esi)
+{
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%al\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+		  "=S" (*esi)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+						u32 ecx_in, u32 *eax)
+{
+	int	cx, dx, si;
+	u8	error;
+
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%bl\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+		  "=S" (si)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+	return error;
+}
+
+#endif /* _ASM_APM_H */
diff --git a/include/asm-i386/mach-default/bios_ebda.h b/include/asm-i386/mach-default/bios_ebda.h
new file mode 100644
index 000000000000..9cbd9a668af8
--- /dev/null
+++ b/include/asm-i386/mach-default/bios_ebda.h
@@ -0,0 +1,15 @@
+#ifndef _MACH_BIOS_EBDA_H
+#define _MACH_BIOS_EBDA_H
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+	address <<= 4;
+	return address;	/* 0 means none */
+}
+
+#endif /* _MACH_BIOS_EBDA_H */
diff --git a/include/asm-i386/mach-default/do_timer.h b/include/asm-i386/mach-default/do_timer.h
new file mode 100644
index 000000000000..03dd13a48a8c
--- /dev/null
+++ b/include/asm-i386/mach-default/do_timer.h
@@ -0,0 +1,85 @@
+/* defines for inline arch setup functions */
+
+#include <asm/apic.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs:	standard registers from interrupt
+ *
+ * Description:
+ *	This hook is called immediately after the timer interrupt is ack'd.
+ *	It's primary purpose is to allow architectures that don't possess
+ *	individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ *	timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+	profile_tick(CPU_PROFILING, regs);
+#else
+	if (!using_apic_timer)
+		smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count:	hardware timer interrupt count on overflow
+ *
+ * Description:
+ *	This call is invoked when the jiffies count has not incremented but
+ *	the hardware timer interrupt has.  It means that a timer tick interrupt
+ *	came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+	int i;
+
+	spin_lock(&i8259A_lock);
+	/*
+	 * This is tricky when I/O APICs are used;
+	 * see do_timer_interrupt().
+	 */
+	i = inb(0x20);
+	spin_unlock(&i8259A_lock);
+	
+	/* assumption about timer being IRQ0 */
+	if (i & 0x01) {
+		/*
+		 * We cannot detect lost timer interrupts ... 
+		 * well, that's why we call them lost, don't we? :)
+		 * [hmm, on the Pentium and Alpha we can ... sort of]
+		 */
+		count -= LATCH;
+	} else {
+#ifdef BUGGY_NEPTUN_TIMER
+		/*
+		 * for the Neptun bug we know that the 'latch'
+		 * command doesn't latch the high and low value
+		 * of the counter atomically. Thus we have to 
+		 * substract 256 from the counter 
+		 * ... funny, isnt it? :)
+		 */
+		
+		count -= 256;
+#else
+		printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+	}
+	return count;
+}
diff --git a/include/asm-i386/mach-default/entry_arch.h b/include/asm-i386/mach-default/entry_arch.h
new file mode 100644
index 000000000000..bc861469bdba
--- /dev/null
+++ b/include/asm-i386/mach-default/entry_arch.h
@@ -0,0 +1,34 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff --git a/include/asm-i386/mach-default/io_ports.h b/include/asm-i386/mach-default/io_ports.h
new file mode 100644
index 000000000000..a96d9f6604ee
--- /dev/null
+++ b/include/asm-i386/mach-default/io_ports.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/i386/mach-generic/io_ports.h
+ *
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_IO_PORTS_H
+#define _MACH_IO_PORTS_H
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+#endif /* !_MACH_IO_PORTS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors.h b/include/asm-i386/mach-default/irq_vectors.h
new file mode 100644
index 000000000000..881c63ca61ad
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors.h
@@ -0,0 +1,96 @@
+/*
+ * This file should contain #defines for all of the interrupt vector
+ * numbers used by this architecture.
+ *
+ * In addition, there are some standard defines:
+ *
+ *	FIRST_EXTERNAL_VECTOR:
+ *		The first free place for external interrupts
+ *
+ *	SYSCALL_VECTOR:
+ *		The IRQ vector a syscall makes the user to kernel transition
+ *		under.
+ *
+ *	TIMER_IRQ:
+ *		The IRQ number the timer interrupt comes in at.
+ *
+ *	NR_IRQS:
+ *		The total number of interrupt vectors (including all the
+ *		architecture specific interrupts) needed.
+ *
+ */			
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#define SYSCALL_VECTOR		0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR	0xff
+#define ERROR_APIC_VECTOR	0xfe
+#define INVALIDATE_TLB_VECTOR	0xfd
+#define RESCHEDULE_VECTOR	0xfc
+#define CALL_FUNCTION_VECTOR	0xfb
+
+#define THERMAL_APIC_VECTOR	0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	0x31
+#define FIRST_SYSTEM_VECTOR	0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+
+/*
+ * The maximum number of vectors supported by i386 processors
+ * is limited to 256. For processors other than i386, NR_VECTORS
+ * should be changed accordingly.
+ */
+#define NR_VECTORS 256
+
+#include "irq_vectors_limits.h"
+
+#define FPU_IRQ			13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-i386/mach-default/irq_vectors_limits.h
new file mode 100644
index 000000000000..b330026e6f7f
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors_limits.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+#ifdef CONFIG_PCI_MSI
+#define NR_IRQS FIRST_SYSTEM_VECTOR
+#define NR_IRQ_VECTORS NR_IRQS
+#else
+#ifdef CONFIG_X86_IO_APIC
+#define NR_IRQS 224
+# if (224 >= 32 * NR_CPUS)
+# define NR_IRQ_VECTORS NR_IRQS
+# else
+# define NR_IRQ_VECTORS (32 * NR_CPUS)
+# endif
+#else
+#define NR_IRQS 16
+#define NR_IRQ_VECTORS NR_IRQS
+#endif
+#endif
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-i386/mach-default/mach_apic.h b/include/asm-i386/mach-default/mach_apic.h
new file mode 100644
index 000000000000..627f1cd084ba
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apic.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline cpumask_t target_cpus(void)
+{ 
+#ifdef CONFIG_SMP
+	return cpu_online_map;
+#else
+	return cpumask_of_cpu(0);
+#endif
+} 
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (0)
+#define esr_disable (0)
+
+#define NO_IOAPIC_CHECK (0)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < get_physical_broadcast())
+		return  mps_cpu;
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, 
+			struct mpc_config_translation *translation_record)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+			m->mpc_apicid,
+			(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+			(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+			m->mpc_apicver);
+	return (m->mpc_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline int apic_id_registered(void)
+{
+	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-default/mach_apicdef.h b/include/asm-i386/mach-default/mach_apicdef.h
new file mode 100644
index 000000000000..7bcb350c3ee8
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x) 
+{ 
+	return (((x)>>24)&0xF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-default/mach_ipi.h b/include/asm-i386/mach-default/mach_ipi.h
new file mode 100644
index 000000000000..6f2b17a20089
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_ipi.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_bitmask(cpumask_t mask, int vector);
+void __send_IPI_shortcut(unsigned int shortcut, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_bitmask(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send 
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+	return;
+}
+
+static inline void send_IPI_all(int vector)
+{
+	__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-default/mach_mpparse.h b/include/asm-i386/mach-default/mach_mpparse.h
new file mode 100644
index 000000000000..1d3832482580
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpparse.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, 
+				struct mpc_config_translation *translation)
+{
+//	Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, 
+				struct mpc_config_translation *translation)
+{
+}
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
+		char *productid)
+{
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-i386/mach-default/mach_mpspec.h
new file mode 100644
index 000000000000..6b5dadcf1d0e
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#define MAX_MP_BUSSES 32
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-i386/mach-default/mach_reboot.h
new file mode 100644
index 000000000000..521e227db679
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_reboot.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/i386/mach-generic/mach_reboot.h
+ *
+ *  Machine specific reboot functions for generic.
+ *  Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_REBOOT_H
+#define _MACH_REBOOT_H
+
+static inline void kb_wait(void)
+{
+	int i;
+
+	for (i = 0; i < 0x10000; i++)
+		if ((inb_p(0x64) & 0x02) == 0)
+			break;
+}
+
+static inline void mach_reboot(void)
+{
+	int i;
+	for (i = 0; i < 100; i++) {
+		kb_wait();
+		udelay(50);
+		outb(0xfe, 0x64);         /* pulse reset low */
+		udelay(50);
+	}
+}
+
+#endif /* !_MACH_REBOOT_H */
diff --git a/include/asm-i386/mach-default/mach_time.h b/include/asm-i386/mach-default/mach_time.h
new file mode 100644
index 000000000000..b749aa44a86f
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_time.h
@@ -0,0 +1,122 @@
+/*
+ *  include/asm-i386/mach-default/mach_time.h
+ *
+ *  Machine specific set RTC function for generic.
+ *  Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/mc146818rtc.h>
+
+/* for check timing call set_rtc_mmss() 500ms     */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	return retval;
+}
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int i;
+
+	/* The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+	/* read RTC exactly on falling edge of update flag */
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+			break;
+	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
+		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+			break;
+	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	  {
+	    BCD_TO_BIN(sec);
+	    BCD_TO_BIN(min);
+	    BCD_TO_BIN(hour);
+	    BCD_TO_BIN(day);
+	    BCD_TO_BIN(mon);
+	    BCD_TO_BIN(year);
+	  }
+	if ((year += 1900) < 1970)
+		year += 100;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* !_MACH_TIME_H */
diff --git a/include/asm-i386/mach-default/mach_timer.h b/include/asm-i386/mach-default/mach_timer.h
new file mode 100644
index 000000000000..4b9703bb0288
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ *  include/asm-i386/mach-default/mach_timer.h
+ *
+ *  Machine specific calibrate_tsc() for generic.
+ *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC ------- 
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_TIMER_H
+#define _MACH_TIMER_H
+
+#define CALIBRATE_LATCH	(5 * LATCH)
+
+static inline void mach_prepare_counter(void)
+{
+       /* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
+	 */
+	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+	unsigned long count = 0;
+	do {
+		count++;
+	} while ((inb_p(0x61) & 0x20) == 0);
+	*count_p = count;
+}
+
+#endif /* !_MACH_TIMER_H */
diff --git a/include/asm-i386/mach-default/mach_traps.h b/include/asm-i386/mach-default/mach_traps.h
new file mode 100644
index 000000000000..625438b8a6eb
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_traps.h
@@ -0,0 +1,41 @@
+/*
+ *  include/asm-i386/mach-default/mach_traps.h
+ *
+ *  Machine specific NMI handling for generic.
+ *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline void clear_mem_error(unsigned char reason)
+{
+	reason = (reason & 0xf) | 4;
+	outb(reason, 0x61);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+	return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+	int old_reg = -1;
+
+	if (do_i_have_lock_cmos())
+		old_reg = current_lock_cmos_reg();
+	else
+		lock_cmos(0); /* register doesn't matter here */
+	outb(0x8f, 0x70);
+	inb(0x71);		/* dummy */
+	outb(0x0f, 0x70);
+	inb(0x71);		/* dummy */
+	if (old_reg >= 0)
+		outb(old_reg, 0x70);
+	else
+		unlock_cmos();
+}
+
+#endif /* !_MACH_TRAPS_H */
diff --git a/include/asm-i386/mach-default/mach_wakecpu.h b/include/asm-i386/mach-default/mach_wakecpu.h
new file mode 100644
index 000000000000..673b85c9b273
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_wakecpu.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert));
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-i386/mach-default/pci-functions.h b/include/asm-i386/mach-default/pci-functions.h
new file mode 100644
index 000000000000..ed0bab427354
--- /dev/null
+++ b/include/asm-i386/mach-default/pci-functions.h
@@ -0,0 +1,19 @@
+/*
+ *	PCI BIOS function numbering for conventional PCI BIOS 
+ *	systems
+ */
+
+#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
+#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
+#define PCIBIOS_FIND_PCI_DEVICE		0xb102
+#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
+#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
+#define PCIBIOS_READ_CONFIG_BYTE	0xb108
+#define PCIBIOS_READ_CONFIG_WORD	0xb109
+#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
+#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
+#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
+#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
+#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
+#define PCIBIOS_SET_PCI_HW_INT		0xb10f
+
diff --git a/include/asm-i386/mach-default/setup_arch_post.h b/include/asm-i386/mach-default/setup_arch_post.h
new file mode 100644
index 000000000000..2fc4888721f6
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_post.h
@@ -0,0 +1,40 @@
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ *
+ * Description:
+ *	This is included late in kernel/setup.c so that it can make
+ *	use of all of the static functions.
+ **/
+
+static char * __init machine_specific_memory_setup(void)
+{
+	char *who;
+
+
+	who = "BIOS-e820";
+
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+		unsigned long mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (ALT_MEM_K < EXT_MEM_K) {
+			mem_size = EXT_MEM_K;
+			who = "BIOS-88";
+		} else {
+			mem_size = ALT_MEM_K;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+  	}
+	return who;
+}
diff --git a/include/asm-i386/mach-default/setup_arch_pre.h b/include/asm-i386/mach-default/setup_arch_pre.h
new file mode 100644
index 000000000000..fb42099e7bd4
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_pre.h
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
+
+#define ARCH_SETUP
diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h
new file mode 100644
index 000000000000..7f45f6311059
--- /dev/null
+++ b/include/asm-i386/mach-default/smpboot_hooks.h
@@ -0,0 +1,44 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+	io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+	CMOS_WRITE(0xa, 0xf);
+	local_flush_tlb();
+	Dprintk("1.\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+	Dprintk("2.\n");
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+	Dprintk("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+	/*
+	 * Install writable page 0 entry to set BIOS data area.
+	 */
+	local_flush_tlb();
+
+	/*
+	 * Paranoid:  Set warm reset code and vector here back
+	 * to default values.
+	 */
+	CMOS_WRITE(0, 0xf);
+
+	*((volatile long *) phys_to_virt(0x467)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+	/*
+	 * Here we can be sure that there is an IO-APIC in the system. Let's
+	 * go and set it up:
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+}
diff --git a/include/asm-i386/mach-es7000/mach_apic.h b/include/asm-i386/mach-es7000/mach_apic.h
new file mode 100644
index 000000000000..ceab2c464b13
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_apic.h
@@ -0,0 +1,207 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+extern u8 bios_cpu_apicid[];
+
+#define xapic_phys_to_log_apicid(cpu) (bios_cpu_apicid[cpu])
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	        return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{ 
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+	return CPU_MASK_ALL;
+#else
+	return cpumask_of_cpu(smp_processor_id());
+#endif
+}
+#define TARGET_CPUS	(target_cpus())
+
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+#define APIC_DFR_VALUE		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE	(dest_LowestPrio)
+#define INT_DEST_MODE		(1)    /* logical delivery broadcast to all procs */
+#define NO_BALANCE_IRQ 		(1)
+#undef  WAKE_SECONDARY_VIA_INIT
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE	(dest_Fixed)
+#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
+#define NO_BALANCE_IRQ 		(0)
+#undef  APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL	0x0
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#define NO_IOAPIC_CHECK (1)
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{ 
+	return 0;
+} 
+static inline unsigned long check_apicid_present(int bit) 
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id;
+	id = xapic_phys_to_log_apicid(cpu);
+	return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write_around(APIC_LDR, val);
+}
+
+extern void es7000_sw_apic(void);
+static inline void enable_apic_mode(void)
+{
+	es7000_sw_apic();
+	return;
+}
+
+extern int apic_version [MAX_APICS];
+static inline void clustered_apic_check(void)
+{
+	int apic = bios_cpu_apicid[smp_processor_id()];
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ? 
+		"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < NR_CPUS)
+		return (int) bios_cpu_apicid[mps_cpu];
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	static int id = 0;
+	physid_mask_t mask;
+	mask = physid_mask_of_physid(id);
+	++id;
+	return mask;
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+       return (int)cpu_2_logical_apicid[cpu];
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, struct mpc_config_translation *unused)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+	        m->mpc_apicid,
+	        (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	        (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	        m->mpc_apicver);
+	return (m->mpc_apicid);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+
+static inline void setup_portio_remap(void)
+{
+}
+
+extern unsigned int boot_cpu_physical_apicid;
+static inline int check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+	return (1);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;	
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+		return 0xFF;
+#else
+		return cpu_to_logical_apicid(0);
+#endif
+	/* 
+	 * The cpus in the mask must all be on the apic cluster.  If are not 
+	 * on the same apicid cluster return default value of TARGET_CPUS. 
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) != 
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n",__FUNCTION__);
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+				return 0xFF;
+#else
+				return cpu_to_logical_apicid(0);
+#endif
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-es7000/mach_apicdef.h b/include/asm-i386/mach-es7000/mach_apicdef.h
new file mode 100644
index 000000000000..a58ab5a75c8c
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x) 
+{ 
+	return (((x)>>24)&0xFF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-es7000/mach_ipi.h b/include/asm-i386/mach-es7000/mach_ipi.h
new file mode 100644
index 000000000000..5e61bd220b06
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_ipi.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-es7000/mach_mpparse.h b/include/asm-i386/mach-es7000/mach_mpparse.h
new file mode 100644
index 000000000000..85809e0898d7
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_mpparse.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, 
+				struct mpc_config_translation *translation)
+{
+	Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, 
+				struct mpc_config_translation *translation)
+{
+}
+
+extern int parse_unisys_oem (char *oemptr, int oem_entries);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length);
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	if (mpc->mpc_oemptr) {
+		struct mp_config_oemtable *oem_table = 
+			(struct mp_config_oemtable *)mpc->mpc_oemptr;
+		if (!strncmp(oem, "UNISYS", 6))
+			return parse_unisys_oem((char *)oem_table, oem_table->oem_length);
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	unsigned long oem_addr; 
+	int oem_entries;
+	if (!find_unisys_acpi_oem_table(&oem_addr, &oem_entries))
+		return parse_unisys_oem((char *)oem_addr, oem_entries);
+	return 0;
+}
+
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-es7000/mach_mpspec.h b/include/asm-i386/mach-es7000/mach_mpspec.h
new file mode 100644
index 000000000000..b1f5039d4506
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#define MAX_MP_BUSSES 256
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-es7000/mach_wakecpu.h b/include/asm-i386/mach-es7000/mach_wakecpu.h
new file mode 100644
index 000000000000..efc903b73486
--- /dev/null
+++ b/include/asm-i386/mach-es7000/mach_wakecpu.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_MIP
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+static inline int
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+	int boot_error = 0;
+	boot_error = es7000_start_cpu(phys_apicid, start_eip);
+	return boot_error;
+}
+#endif
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+#ifdef WAKE_SECONDARY_VIA_INIT
+	while (!atomic_read(deassert));
+#endif
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-i386/mach-generic/irq_vectors_limits.h b/include/asm-i386/mach-generic/irq_vectors_limits.h
new file mode 100644
index 000000000000..890ce3f5e09a
--- /dev/null
+++ b/include/asm-i386/mach-generic/irq_vectors_limits.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+/*
+ * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
+ * even with uni-proc kernels, so use a big array.
+ *
+ * This value should be the same in both the generic and summit subarches.
+ * Change one, change 'em both.
+ */
+#define NR_IRQS	224
+#define NR_IRQ_VECTORS	1024
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-i386/mach-generic/mach_apic.h b/include/asm-i386/mach-generic/mach_apic.h
new file mode 100644
index 000000000000..ab36d02ebede
--- /dev/null
+++ b/include/asm-i386/mach-generic/mach_apic.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <asm/genapic.h>
+
+#define esr_disable (genapic->ESR_DISABLE)
+#define NO_BALANCE_IRQ (genapic->no_balance_irq)
+#define NO_IOAPIC_CHECK	(genapic->no_ioapic_check)
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
+#define clustered_apic_check (genapic->clustered_apic_check) 
+#define multi_timer_check (genapic->multi_timer_check)
+#define apicid_to_node (genapic->apicid_to_node)
+#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
+#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
+#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
+#define mpc_apic_id (genapic->mpc_apic_id) 
+#define setup_portio_remap (genapic->setup_portio_remap)
+#define check_apicid_present (genapic->check_apicid_present)
+#define check_phys_apicid_present (genapic->check_phys_apicid_present)
+#define check_apicid_used (genapic->check_apicid_used)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define enable_apic_mode (genapic->enable_apic_mode)
+#define phys_pkg_id (genapic->phys_pkg_id)
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-generic/mach_apicdef.h b/include/asm-i386/mach-generic/mach_apicdef.h
new file mode 100644
index 000000000000..28ed98972ca8
--- /dev/null
+++ b/include/asm-i386/mach-generic/mach_apicdef.h
@@ -0,0 +1,11 @@
+#ifndef _GENAPIC_MACH_APICDEF_H
+#define _GENAPIC_MACH_APICDEF_H 1
+
+#ifndef APIC_DEFINITION
+#include <asm/genapic.h>
+
+#define GET_APIC_ID (genapic->get_apic_id)
+#define APIC_ID_MASK (genapic->apic_id_mask)
+#endif
+
+#endif
diff --git a/include/asm-i386/mach-generic/mach_ipi.h b/include/asm-i386/mach-generic/mach_ipi.h
new file mode 100644
index 000000000000..441b0fe3ed1d
--- /dev/null
+++ b/include/asm-i386/mach-generic/mach_ipi.h
@@ -0,0 +1,10 @@
+#ifndef _MACH_IPI_H
+#define _MACH_IPI_H 1
+
+#include <asm/genapic.h>
+
+#define send_IPI_mask (genapic->send_IPI_mask)
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+
+#endif
diff --git a/include/asm-i386/mach-generic/mach_mpparse.h b/include/asm-i386/mach-generic/mach_mpparse.h
new file mode 100644
index 000000000000..dbd9fce54f4d
--- /dev/null
+++ b/include/asm-i386/mach-generic/mach_mpparse.h
@@ -0,0 +1,12 @@
+#ifndef _MACH_MPPARSE_H
+#define _MACH_MPPARSE_H 1
+
+#include <asm/genapic.h>
+
+#define mpc_oem_bus_info (genapic->mpc_oem_bus_info)
+#define mpc_oem_pci_bus (genapic->mpc_oem_pci_bus)
+
+int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
+int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+#endif
diff --git a/include/asm-i386/mach-generic/mach_mpspec.h b/include/asm-i386/mach-generic/mach_mpspec.h
new file mode 100644
index 000000000000..9ef0b941bb22
--- /dev/null
+++ b/include/asm-i386/mach-generic/mach_mpspec.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
+/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
+#define MAX_MP_BUSSES 260
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-numaq/mach_apic.h b/include/asm-i386/mach-numaq/mach_apic.h
new file mode 100644
index 000000000000..e1a04494764a
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_apic.h
@@ -0,0 +1,151 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	return CPU_MASK_ALL;
+}
+
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (1)
+#define esr_disable (1)
+
+#define NO_IOAPIC_CHECK (0)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
+ 
+#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
+#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+static inline int apicid_to_node(int logical_apicid) 
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
+{
+	int node = apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, 
+			struct mpc_config_translation *translation_record)
+{
+	int quad = translation_record->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk("Processor #%d %ld:%ld APIC version %d (quad %d, apic %d)\n",
+			m->mpc_apicid,
+			(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+			(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+			m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+static inline void setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+       		return;
+
+	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return (int) 0xF;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-numaq/mach_apicdef.h b/include/asm-i386/mach-numaq/mach_apicdef.h
new file mode 100644
index 000000000000..bf439d0690f5
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_apicdef.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+
+#define APIC_ID_MASK (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	        return (((x)>>24)&0x0F);
+}
+
+#define         GET_APIC_ID(x)  get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-numaq/mach_ipi.h b/include/asm-i386/mach-numaq/mach_ipi.h
new file mode 100644
index 000000000000..1b46fd3f2ae3
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+inline void send_IPI_mask_sequence(cpumask_t, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-numaq/mach_mpparse.h b/include/asm-i386/mach-numaq/mach_mpparse.h
new file mode 100644
index 000000000000..51bbac8fc0c2
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_mpparse.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, 
+				struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk("Bus #%d is %s (node %d)\n", m->mpc_busid, name, quad);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, 
+				struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+}
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-numaq/mach_mpspec.h b/include/asm-i386/mach-numaq/mach_mpspec.h
new file mode 100644
index 000000000000..dffb09856f8f
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 512
+
+#define MAX_MP_BUSSES 32
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-numaq/mach_wakecpu.h b/include/asm-i386/mach-numaq/mach_wakecpu.h
new file mode 100644
index 000000000000..00530041a991
--- /dev/null
+++ b/include/asm-i386/mach-numaq/mach_wakecpu.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/* This file copes with machines that wakeup secondary CPUs by NMIs */
+
+#define WAKE_SECONDARY_VIA_NMI
+
+#define TRAMPOLINE_LOW phys_to_virt(0x8)
+#define TRAMPOLINE_HIGH phys_to_virt(0xa)
+
+#define boot_cpu_apicid boot_cpu_logical_apicid
+
+/* We don't do anything here because we use NMI's to boot instead */
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+}
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
+ */
+static inline void smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Storing NMI vector\n");
+	*high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
+	*low = *((volatile unsigned short *) TRAMPOLINE_LOW);
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Restoring NMI vector\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
+}
+
+#define inquire_remote_apic(apicid) {}
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-i386/mach-summit/irq_vectors_limits.h b/include/asm-i386/mach-summit/irq_vectors_limits.h
new file mode 100644
index 000000000000..890ce3f5e09a
--- /dev/null
+++ b/include/asm-i386/mach-summit/irq_vectors_limits.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+/*
+ * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
+ * even with uni-proc kernels, so use a big array.
+ *
+ * This value should be the same in both the generic and summit subarches.
+ * Change one, change 'em both.
+ */
+#define NR_IRQS	224
+#define NR_IRQ_VECTORS	1024
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-i386/mach-summit/mach_apic.h b/include/asm-i386/mach-summit/mach_apic.h
new file mode 100644
index 000000000000..74e9cbc8c01b
--- /dev/null
+++ b/include/asm-i386/mach-summit/mach_apic.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <linux/config.h>
+#include <asm/smp.h>
+
+#define esr_disable (1)
+#define NO_BALANCE_IRQ (0)
+
+#define NO_IOAPIC_CHECK (1)	/* Don't check I/O APIC ID for xAPIC */
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return cpumask_of_cpu(0);
+} 
+#define TARGET_CPUS	(target_cpus())
+
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+} 
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long check_apicid_present(int bit) 
+{
+	return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 bios_cpu_apicid[];
+extern u8 cpu_2_logical_apicid[];
+
+static inline void init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int i, count;
+	u8 lid;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = (u8)apicid_cluster(my_id);
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = NR_CPUS; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+			++count;
+	}
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return logical_apicid >> 5;          /* 2 clusterids per CEC */
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int)bios_cpu_apicid[mps_cpu];
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, 
+			struct mpc_config_translation *translation_record)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+			m->mpc_apicid,
+			(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+			(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+			m->mpc_apicver);
+	return (m->mpc_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;	
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+		return (int) 0xFF;
+	/* 
+	 * The cpus in the mask must all be on the apic cluster.  If are not 
+	 * on the same apicid cluster return default value of TARGET_CPUS. 
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) != 
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n",__FUNCTION__);
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+/* cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-summit/mach_apicdef.h b/include/asm-i386/mach-summit/mach_apicdef.h
new file mode 100644
index 000000000000..a58ab5a75c8c
--- /dev/null
+++ b/include/asm-i386/mach-summit/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x) 
+{ 
+	return (((x)>>24)&0xFF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-summit/mach_ipi.h b/include/asm-i386/mach-summit/mach_ipi.h
new file mode 100644
index 000000000000..9404c535b7ec
--- /dev/null
+++ b/include/asm-i386/mach-summit/mach_ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h
new file mode 100644
index 000000000000..2b9e6d55bef1
--- /dev/null
+++ b/include/asm-i386/mach-summit/mach_mpparse.h
@@ -0,0 +1,121 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+#include <mach_apic.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, 
+				struct mpc_config_translation *translation)
+{
+	Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, 
+				struct mpc_config_translation *translation)
+{
+}
+
+extern int usb_early_handoff;
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
+		char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) && 
+			(!strncmp(productid, "VIGIL SMP", 9) 
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		usb_early_handoff = 1;
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		usb_early_handoff = 1;
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-summit/mach_mpspec.h b/include/asm-i386/mach-summit/mach_mpspec.h
new file mode 100644
index 000000000000..bd765523511a
--- /dev/null
+++ b/include/asm-i386/mach-summit/mach_mpspec.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
+#define MAX_MP_BUSSES 260
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-visws/cobalt.h b/include/asm-i386/mach-visws/cobalt.h
new file mode 100644
index 000000000000..33c36225a042
--- /dev/null
+++ b/include/asm-i386/mach-visws/cobalt.h
@@ -0,0 +1,125 @@
+#ifndef __I386_SGI_COBALT_H
+#define __I386_SGI_COBALT_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */ 
+
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+#define	CO_CPU_PHYS		0xc2000000
+#define	CO_APIC_PHYS		0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
+#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define	CO_CPU_REV		0x08
+#define	CO_CPU_CTRL		0x10
+#define	CO_CPU_STAT		0x20
+#define	CO_CPU_TIMEVAL		0x30
+
+/* CO_CPU_CTRL bits */
+#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
+#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
+#define	CO_APIC_LO(n)		((n) * 0x10)
+#define	CO_APIC_ID		0x0ffc
+
+/* CO_APIC_ID bits */
+#define	CO_APIC_ENABLE		0x00000100
+
+/* CO_APIC_LO bits */
+#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
+#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define	CO_APIC_IDE0		4
+#define CO_APIC_IDE1		2		/* Only on 320 */
+
+#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
+#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
+
+#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
+#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
+
+#define	CO_APIC_VIDOUT0		16
+#define	CO_APIC_VIDOUT1		17
+#define	CO_APIC_VIDIN0		18
+#define	CO_APIC_VIDIN1		19
+
+#define	CO_APIC_LI_AUDIO	22
+
+#define	CO_APIC_AS		24
+#define	CO_APIC_RE		25
+
+#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
+#define	CO_APIC_NMI		29
+#define	CO_APIC_LAST		CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
+#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
+#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
+#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
+#define CO_IRQ_IDE0	14			/* knowledge of... */
+#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
+#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+extern __inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+extern __inline unsigned long co_cpu_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}            
+             
+extern __inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}            
+             
+extern __inline unsigned long co_apic_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define	VISWS_320	0
+#define	VISWS_540	1
+
+extern char visws_board_rev;
+
+#endif /* __I386_SGI_COBALT_H */
diff --git a/include/asm-i386/mach-visws/do_timer.h b/include/asm-i386/mach-visws/do_timer.h
new file mode 100644
index 000000000000..33acd50fd9a8
--- /dev/null
+++ b/include/asm-i386/mach-visws/do_timer.h
@@ -0,0 +1,52 @@
+/* defines for inline arch setup functions */
+
+#include <asm/fixmap.h>
+#include "cobalt.h"
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+	/* Clear the interrupt */
+	co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR);
+
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+	profile_tick(CPU_PROFILING, regs);
+#else
+	if (!using_apic_timer)
+		smp_local_timer_interrupt(regs);
+#endif
+}
+
+static inline int do_timer_overflow(int count)
+{
+	int i;
+
+	spin_lock(&i8259A_lock);
+	/*
+	 * This is tricky when I/O APICs are used;
+	 * see do_timer_interrupt().
+	 */
+	i = inb(0x20);
+	spin_unlock(&i8259A_lock);
+	
+	/* assumption about timer being IRQ0 */
+	if (i & 0x01) {
+		/*
+		 * We cannot detect lost timer interrupts ... 
+		 * well, that's why we call them lost, don't we? :)
+		 * [hmm, on the Pentium and Alpha we can ... sort of]
+		 */
+		count -= LATCH;
+	} else {
+		printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+	}
+	return count;
+}
diff --git a/include/asm-i386/mach-visws/entry_arch.h b/include/asm-i386/mach-visws/entry_arch.h
new file mode 100644
index 000000000000..b183fa6d83d9
--- /dev/null
+++ b/include/asm-i386/mach-visws/entry_arch.h
@@ -0,0 +1,23 @@
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+#endif
diff --git a/include/asm-i386/mach-visws/irq_vectors.h b/include/asm-i386/mach-visws/irq_vectors.h
new file mode 100644
index 000000000000..cb572d8db505
--- /dev/null
+++ b/include/asm-i386/mach-visws/irq_vectors.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#define SYSCALL_VECTOR		0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR	0xff
+#define ERROR_APIC_VECTOR	0xfe
+#define INVALIDATE_TLB_VECTOR	0xfd
+#define RESCHEDULE_VECTOR	0xfc
+#define CALL_FUNCTION_VECTOR	0xfb
+
+#define THERMAL_APIC_VECTOR	0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	0x31
+#define FIRST_SYSTEM_VECTOR	0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * IRQ definitions
+ */
+#define NR_VECTORS 256
+#define NR_IRQS 224
+#define NR_IRQ_VECTORS NR_IRQS
+
+#define FPU_IRQ			13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-i386/mach-visws/lithium.h b/include/asm-i386/mach-visws/lithium.h
new file mode 100644
index 000000000000..d443e68d0066
--- /dev/null
+++ b/include/asm-i386/mach-visws/lithium.h
@@ -0,0 +1,53 @@
+#ifndef __I386_SGI_LITHIUM_H
+#define __I386_SGI_LITHIUM_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
+#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN    0x46
+
+/* LI_PCI_INTENT bits */
+#define	LI_INTA_0	0x0001
+#define	LI_INTA_1	0x0002
+#define	LI_INTA_2	0x0004
+#define	LI_INTA_3	0x0008
+#define	LI_INTA_4	0x0010
+#define	LI_INTB		0x0020
+#define	LI_INTC		0x0040
+#define	LI_INTD		0x0080
+
+/* More special purpose macros... */
+extern __inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+extern __inline unsigned short li_pcia_read16(unsigned long reg)
+{
+	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+extern __inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+extern __inline unsigned short li_pcib_read16(unsigned long reg)
+{
+	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+
+#endif
+
diff --git a/include/asm-i386/mach-visws/mach_apic.h b/include/asm-i386/mach-visws/mach_apic.h
new file mode 100644
index 000000000000..4e6cdfb8b091
--- /dev/null
+++ b/include/asm-i386/mach-visws/mach_apic.h
@@ -0,0 +1,100 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+#define no_balance_irq (0)
+#define esr_disable (0)
+
+#define NO_IOAPIC_CHECK (0)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+#ifdef CONFIG_SMP
+ #define TARGET_CPUS cpu_online_map
+#else
+ #define TARGET_CPUS cpumask_of_cpu(0)
+#endif
+
+#define check_apicid_used(bitmap, apicid)	physid_isset(apicid, bitmap)
+#define check_apicid_present(bit)		physid_isset(bit, phys_cpu_present_map)
+
+static inline int apic_id_registered(void)
+{
+	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline void summit_check(char *oem, char *productid) 
+{
+}
+
+static inline void clustered_apic_check(void)
+{
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < get_physical_broadcast())
+		return mps_cpu;
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(apicid);
+}
+
+#define WAKE_SECONDARY_VIA_INIT
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-visws/mach_apicdef.h b/include/asm-i386/mach-visws/mach_apicdef.h
new file mode 100644
index 000000000000..826cfa97d778
--- /dev/null
+++ b/include/asm-i386/mach-visws/mach_apicdef.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define         APIC_ID_MASK            (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	        return (((x)>>24)&0xF);
+}
+#define         GET_APIC_ID(x)  get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-visws/piix4.h b/include/asm-i386/mach-visws/piix4.h
new file mode 100644
index 000000000000..83ea4f46e419
--- /dev/null
+++ b/include/asm-i386/mach-visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef __I386_SGI_PIIX_H
+#define __I386_SGI_PIIX_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define	PIIX_PM_START		0x0F80
+
+#define	SIO_GPIO_START		0x0FC0
+
+#define	SIO_PM_START		0x0FC8
+
+#define	PMBASE			PIIX_PM_START
+#define	GPIREG0			(PMBASE+0x30)
+#define	GPIREG(x)		(GPIREG0+((x)/8))
+#define	GPIBIT(x)		(1 << ((x)%8))
+
+#define	PIIX_GPI_BD_ID1		18
+#define	PIIX_GPI_BD_ID2		19
+#define	PIIX_GPI_BD_ID3		20
+#define	PIIX_GPI_BD_ID4		21
+#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
+#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
+				GPIBIT(PIIX_GPI_BD_ID2) | \
+				GPIBIT(PIIX_GPI_BD_ID3) | \
+				GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
+
+#define	SIO_INDEX		0x2e
+#define	SIO_DATA		0x2f
+
+#define	SIO_DEV_SEL		0x7
+#define	SIO_DEV_ENB		0x30
+#define	SIO_DEV_MSB		0x60
+#define	SIO_DEV_LSB		0x61
+
+#define	SIO_GP_DEV		0x7
+
+#define	SIO_GP_BASE		SIO_GPIO_START
+#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
+#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
+
+#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
+
+#define	SIO_PM_DEV		0x8
+
+#define	SIO_PM_BASE		SIO_PM_START
+#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
+#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
+#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
+#define	SIO_PM_DATA		(SIO_PM_BASE+1)
+
+#define	SIO_PM_FER2		0x1
+
+#define	SIO_PM_GP_EN		0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV		0xff
+#define SPECIAL_REG		0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state.  PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP		0x00120002
+
+#define PIIX4_RESET_PORT	0xcf9
+#define PIIX4_RESET_VAL		0x6
+
+#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
+#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
+#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
+
+#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM		(1<<15)	// Resume Status
+#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
+#define PM_STS_RTC		(1<<10)	// RTC status
+#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
+#define PM_STS_GBL		(1<<5)	// Global Status
+#define PM_STS_BM		(1<<4)	// Bus Master Status
+#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0			(0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
+
+#endif
diff --git a/include/asm-i386/mach-visws/setup_arch_post.h b/include/asm-i386/mach-visws/setup_arch_post.h
new file mode 100644
index 000000000000..cdbd895a54b1
--- /dev/null
+++ b/include/asm-i386/mach-visws/setup_arch_post.h
@@ -0,0 +1,49 @@
+/* Hook for machine specific memory setup.
+ *
+ * This is included late in kernel/setup.c so that it can make use of all of
+ * the static functions. */
+
+#define MB (1024 * 1024)
+
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
+
+long long mem_size __initdata = 0;
+
+static char * __init machine_specific_memory_setup(void)
+{
+	long long gfx_mem_size = 8 * MB;
+
+	mem_size = ALT_MEM_K;
+
+	if (!mem_size) {
+		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
+		mem_size = 128 * MB;
+	}
+
+	/*
+	 * this hardcodes the graphics memory to 8 MB
+	 * it really should be sized dynamically (or at least
+	 * set as a boot param)
+	 */
+	if (!sgivwfb_mem_size) {
+		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
+		sgivwfb_mem_size = 8 * MB;
+	}
+
+	/*
+	 * Trim to nearest MB
+	 */
+	sgivwfb_mem_size &= ~((1 << 20) - 1);
+	sgivwfb_mem_phys = mem_size - gfx_mem_size;
+
+	add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+	add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
+	add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
+
+	return "PROM";
+
+	/* Remove gcc warnings */
+	(void) sanitize_e820_map(NULL, NULL);
+	(void) copy_e820_map(NULL, 0);
+}
diff --git a/include/asm-i386/mach-visws/setup_arch_pre.h b/include/asm-i386/mach-visws/setup_arch_pre.h
new file mode 100644
index 000000000000..b92d6d9a4d3c
--- /dev/null
+++ b/include/asm-i386/mach-visws/setup_arch_pre.h
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for visws */
+
+#define ARCH_SETUP
diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-i386/mach-visws/smpboot_hooks.h
new file mode 100644
index 000000000000..d926471fa359
--- /dev/null
+++ b/include/asm-i386/mach-visws/smpboot_hooks.h
@@ -0,0 +1,24 @@
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+	CMOS_WRITE(0xa, 0xf);
+	local_flush_tlb();
+	Dprintk("1.\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+	Dprintk("2.\n");
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+	Dprintk("3.\n");
+}
+
+/* for visws do nothing for any of these */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+}
diff --git a/include/asm-i386/mach-voyager/do_timer.h b/include/asm-i386/mach-voyager/do_timer.h
new file mode 100644
index 000000000000..ae510e5d0d78
--- /dev/null
+++ b/include/asm-i386/mach-voyager/do_timer.h
@@ -0,0 +1,25 @@
+/* defines for inline arch setup functions */
+#include <asm/voyager.h>
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+
+	voyager_timer_interrupt(regs);
+}
+
+static inline int do_timer_overflow(int count)
+{
+	/* can't read the ISR, just assume 1 tick
+	   overflow */
+	if(count > LATCH || count < 0) {
+		printk(KERN_ERR "VOYAGER PROBLEM: count is %d, latch is %d\n", count, LATCH);
+		count = LATCH;
+	}
+	count -= LATCH;
+
+	return count;
+}
diff --git a/include/asm-i386/mach-voyager/entry_arch.h b/include/asm-i386/mach-voyager/entry_arch.h
new file mode 100644
index 000000000000..4a1e1e8c10b6
--- /dev/null
+++ b/include/asm-i386/mach-voyager/entry_arch.h
@@ -0,0 +1,26 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2002
+ *
+ * Author: James.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/voyager/entry_arch.h
+ *
+ * This file builds the VIC and QIC CPI gates
+ */
+
+/* initialise the voyager interrupt gates 
+ *
+ * This uses the macros in irq.h to set up assembly jump gates.  The
+ * calls are then redirected to the same routine with smp_ prefixed */
+BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
+BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
+BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
+
+/* do all the QIC interrupts */
+BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
+BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
+BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
+BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
+BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
+
diff --git a/include/asm-i386/mach-voyager/irq_vectors.h b/include/asm-i386/mach-voyager/irq_vectors.h
new file mode 100644
index 000000000000..165421f5821c
--- /dev/null
+++ b/include/asm-i386/mach-voyager/irq_vectors.h
@@ -0,0 +1,79 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2002
+ *
+ * Author: James.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/voyager/irq_vectors.h
+ *
+ * This file provides definitions for the VIC and QIC CPIs
+ */
+
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#define SYSCALL_VECTOR		0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0			0
+#define VIC_CPI_LEVEL1			1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI			2
+#define VIC_INVALIDATE_CPI		3
+#define VIC_RESCHEDULE_CPI		4
+#define VIC_ENABLE_IRQ_CPI		5
+#define VIC_CALL_FUNCTION_CPI		6
+
+/* Now the QIC CPIs:  Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET			1
+#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT			8
+#define VIC_CMN_INT			15
+
+/* This is the boot CPI for alternate processors.  It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
+
+#define NR_VECTORS 256
+#define NR_IRQS 224
+#define NR_IRQ_VECTORS NR_IRQS
+
+#define FPU_IRQ				13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+#ifndef __ASSEMBLY__
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-i386/mach-voyager/setup_arch_post.h b/include/asm-i386/mach-voyager/setup_arch_post.h
new file mode 100644
index 000000000000..f6f6c2cbc75c
--- /dev/null
+++ b/include/asm-i386/mach-voyager/setup_arch_post.h
@@ -0,0 +1,73 @@
+/* Hook for machine specific memory setup.
+ *
+ * This is included late in kernel/setup.c so that it can make use of all of
+ * the static functions. */
+
+static char * __init machine_specific_memory_setup(void)
+{
+	char *who;
+
+	who = "NOT VOYAGER";
+
+	if(voyager_level == 5) {
+		__u32 addr, length;
+		int i;
+
+		who = "Voyager-SUS";
+
+		e820.nr_map = 0;
+		for(i=0; voyager_memory_detect(i, &addr, &length); i++) {
+			add_memory_region(addr, length, E820_RAM);
+		}
+		return who;
+	} else if(voyager_level == 4) {
+		__u32 tom;
+		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
+		/* select the DINO config space */
+		outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
+		/* Read DINO top of memory register */
+		tom = ((inb(catbase + 0x4) & 0xf0) << 16)
+			+ ((inb(catbase + 0x5) & 0x7f) << 24);
+
+		if(inb(catbase) != VOYAGER_DINO) {
+			printk(KERN_ERR "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
+			tom = (EXT_MEM_K)<<10;
+		}
+		who = "Voyager-TOM";
+		add_memory_region(0, 0x9f000, E820_RAM);
+		/* map from 1M to top of memory */
+		add_memory_region(1*1024*1024, tom - 1*1024*1024, E820_RAM);
+		/* FIXME: Should check the ASICs to see if I need to
+		 * take out the 8M window.  Just do it at the moment
+		 * */
+		add_memory_region(8*1024*1024, 8*1024*1024, E820_RESERVED);
+		return who;
+	}
+
+	who = "BIOS-e820";
+
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+		unsigned long mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (ALT_MEM_K < EXT_MEM_K) {
+			mem_size = EXT_MEM_K;
+			who = "BIOS-88";
+		} else {
+			mem_size = ALT_MEM_K;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+  	}
+	return who;
+}
diff --git a/include/asm-i386/mach-voyager/setup_arch_pre.h b/include/asm-i386/mach-voyager/setup_arch_pre.h
new file mode 100644
index 000000000000..48f7e6ff49a5
--- /dev/null
+++ b/include/asm-i386/mach-voyager/setup_arch_pre.h
@@ -0,0 +1,10 @@
+#include <asm/voyager.h>
+#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40))
+
+/* Hook to call BIOS initialisation function */
+
+/* for voyager, pass the voyager BIOS/SUS info area to the detection 
+ * routines */
+
+#define ARCH_SETUP	voyager_detect(VOYAGER_BIOS_INFO);
+
diff --git a/include/asm-i386/math_emu.h b/include/asm-i386/math_emu.h
new file mode 100644
index 000000000000..697673b555ce
--- /dev/null
+++ b/include/asm-i386/math_emu.h
@@ -0,0 +1,35 @@
+#ifndef _I386_MATH_EMU_H
+#define _I386_MATH_EMU_H
+
+#include <asm/sigcontext.h>
+
+int restore_i387_soft(void *s387, struct _fpstate __user *buf);
+int save_i387_soft(void *s387, struct _fpstate __user *buf);
+
+/* This structure matches the layout of the data saved to the stack
+   following a device-not-present interrupt, part of it saved
+   automatically by the 80386/80486.
+   */
+struct info {
+	long ___orig_eip;
+	long ___ebx;
+	long ___ecx;
+	long ___edx;
+	long ___esi;
+	long ___edi;
+	long ___ebp;
+	long ___eax;
+	long ___ds;
+	long ___es;
+	long ___orig_eax;
+	long ___eip;
+	long ___cs;
+	long ___eflags;
+	long ___esp;
+	long ___ss;
+	long ___vm86_es; /* This and the following only in vm86 mode */
+	long ___vm86_ds;
+	long ___vm86_fs;
+	long ___vm86_gs;
+};
+#endif
diff --git a/include/asm-i386/mc146818rtc.h b/include/asm-i386/mc146818rtc.h
new file mode 100644
index 000000000000..99a890047023
--- /dev/null
+++ b/include/asm-i386/mc146818rtc.h
@@ -0,0 +1,94 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/mc146818rtc.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+#ifdef __HAVE_ARCH_CMPXCHG
+/*
+ * This lock provides nmi access to the CMOS/RTC registers.  It has some
+ * special properties.  It is owned by a CPU and stores the index register
+ * currently being accessed (if owned).  The idea here is that it works
+ * like a normal lock (normally).  However, in an NMI, the NMI code will
+ * first check to see if its CPU owns the lock, meaning that the NMI
+ * interrupted during the read/write of the device.  If it does, it goes ahead
+ * and performs the access and then restores the index register.  If it does
+ * not, it locks normally.
+ *
+ * Note that since we are working with NMIs, we need this lock even in
+ * a non-SMP machine just to mark that the lock is owned.
+ *
+ * This only works with compare-and-swap.  There is no other way to
+ * atomically claim the lock and set the owner.
+ */
+#include <linux/smp.h>
+extern volatile unsigned long cmos_lock;
+
+/*
+ * All of these below must be called with interrupts off, preempt
+ * disabled, etc.
+ */
+
+static inline void lock_cmos(unsigned char reg)
+{
+	unsigned long new;
+	new = ((smp_processor_id()+1) << 8) | reg;
+	for (;;) {
+		if (cmos_lock)
+			continue;
+		if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
+			return;
+	}
+}
+
+static inline void unlock_cmos(void)
+{
+	cmos_lock = 0;
+}
+static inline int do_i_have_lock_cmos(void)
+{
+	return (cmos_lock >> 8) == (smp_processor_id()+1);
+}
+static inline unsigned char current_lock_cmos_reg(void)
+{
+	return cmos_lock & 0xff;
+}
+#define lock_cmos_prefix(reg) \
+	do {					\
+		unsigned long cmos_flags;	\
+		local_irq_save(cmos_flags);	\
+		lock_cmos(reg)
+#define lock_cmos_suffix(reg) \
+		unlock_cmos();			\
+		local_irq_restore(cmos_flags);	\
+	} while (0)
+#else
+#define lock_cmos_prefix(reg) do {} while (0)
+#define lock_cmos_suffix(reg) do {} while (0)
+#define lock_cmos(reg)
+#define unlock_cmos()
+#define do_i_have_lock_cmos() 0
+#define current_lock_cmos_reg() 0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) rtc_cmos_read(addr)
+#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
+unsigned char rtc_cmos_read(unsigned char addr);
+void rtc_cmos_write(unsigned char val, unsigned char addr);
+
+#define RTC_IRQ 8
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-i386/mca.h b/include/asm-i386/mca.h
new file mode 100644
index 000000000000..09adf2eac4dc
--- /dev/null
+++ b/include/asm-i386/mca.h
@@ -0,0 +1,43 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Platform specific MCA defines */
+#ifndef _ASM_MCA_H
+#define _ASM_MCA_H
+
+/* Maximal number of MCA slots - actually, some machines have less, but
+ * they all have sufficient number of POS registers to cover 8.
+ */
+#define MCA_MAX_SLOT_NR  8
+
+/* Most machines have only one MCA bus.  The only multiple bus machines
+ * I know have at most two */
+#define MAX_MCA_BUSSES 2
+
+#define MCA_PRIMARY_BUS		0
+#define MCA_SECONDARY_BUS	1
+
+/* Dummy slot numbers on primary MCA for integrated functions */
+#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
+#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
+#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
+
+/* Dummy POS values for integrated functions */
+#define MCA_DUMMY_POS_START	0x10000
+#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
+#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
+#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
+
+/* MCA registers */
+
+#define MCA_MOTHERBOARD_SETUP_REG	0x94
+#define MCA_ADAPTER_SETUP_REG		0x96
+#define MCA_POS_REG(n)			(0x100+(n))
+
+#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
+
+/* Max number of adapters, including both slots and various integrated
+ * things.
+ */
+#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
+
+#endif
diff --git a/include/asm-i386/mca_dma.h b/include/asm-i386/mca_dma.h
new file mode 100644
index 000000000000..4b3b526c5a3f
--- /dev/null
+++ b/include/asm-i386/mca_dma.h
@@ -0,0 +1,202 @@
+#ifndef MCA_DMA_H
+#define MCA_DMA_H
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+
+/*
+ * Microchannel specific DMA stuff.  DMA on an MCA machine is fairly similar to
+ *   standard PC dma, but it certainly has its quirks.  DMA register addresses
+ *   are in a different place and there are some added functions.  Most of this
+ *   should be pretty obvious on inspection.  Note that the user must divide
+ *   count by 2 when using 16-bit dma; that is not handled by these functions.
+ *
+ * Ramen Noodles are yummy.
+ * 
+ *  1998 Tymm Twillman <tymm@computer.org>  
+ */
+
+/*
+ * Registers that are used by the DMA controller; FN is the function register 
+ *   (tell the controller what to do) and EXE is the execution register (how
+ *   to do it)
+ */
+
+#define MCA_DMA_REG_FN  0x18
+#define MCA_DMA_REG_EXE 0x1A 
+
+/*
+ * Functions that the DMA controller can do
+ */
+
+#define MCA_DMA_FN_SET_IO       0x00
+#define MCA_DMA_FN_SET_ADDR     0x20
+#define MCA_DMA_FN_GET_ADDR     0x30
+#define MCA_DMA_FN_SET_COUNT    0x40
+#define MCA_DMA_FN_GET_COUNT    0x50
+#define MCA_DMA_FN_GET_STATUS   0x60
+#define MCA_DMA_FN_SET_MODE     0x70
+#define MCA_DMA_FN_SET_ARBUS    0x80
+#define MCA_DMA_FN_MASK         0x90
+#define MCA_DMA_FN_RESET_MASK   0xA0
+#define MCA_DMA_FN_MASTER_CLEAR 0xD0
+
+/*
+ * Modes (used by setting MCA_DMA_FN_MODE in the function register)
+ * 
+ * Note that the MODE_READ is read from memory (write to device), and
+ *   MODE_WRITE is vice-versa.  
+ */
+
+#define MCA_DMA_MODE_XFER  0x04  /* read by default */
+#define MCA_DMA_MODE_READ  0x04  /* same as XFER */
+#define MCA_DMA_MODE_WRITE 0x08  /* OR with MODE_XFER to use */
+#define MCA_DMA_MODE_IO    0x01  /* DMA from IO register */
+#define MCA_DMA_MODE_16    0x40  /* 16 bit xfers */
+
+
+/**
+ *	mca_enable_dma	-	channel to enable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static __inline__ void mca_enable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_disble_dma	-	channel to disable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static __inline__ void mca_disable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_set_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *	@a: 24bit bus address
+ *
+ *	Load the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb). 
+ */
+
+static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
+	outb(a & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *
+ *	Read the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb). The return is a bus address.
+ */
+
+static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr)
+{
+	unsigned int addr;
+
+	outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
+	addr = inb(MCA_DMA_REG_EXE);
+	addr |= inb(MCA_DMA_REG_EXE) << 8;
+	addr |= inb(MCA_DMA_REG_EXE) << 16;  
+
+	return addr;
+}
+
+/**
+ *	mca_set_dma_count -	load a 16bit transfer count
+ *	@dmanr: DMA channel
+ *	@count: count
+ *
+ *	Set the DMA count for this channel. This can be up to 64Kbytes.
+ *	Setting a count of zero will not do what you expect.
+ */
+
+static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;  /* transfers one more than count -- correct for this */
+
+	outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
+	outb(count & 0xff, MCA_DMA_REG_EXE);
+	outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_residue -	get the remaining bytes to transfer
+ *	@dmanr: DMA channel
+ *
+ *	This function returns the number of bytes left to transfer
+ *	on this DMA channel.
+ */
+
+static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr)
+{
+	unsigned short count;
+
+	outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
+	count = 1 + inb(MCA_DMA_REG_EXE);
+	count += inb(MCA_DMA_REG_EXE) << 8;
+
+	return count;
+}
+
+/**
+ *	mca_set_dma_io -	set the port for an I/O transfer
+ *	@dmanr: DMA channel
+ *	@io_addr: an I/O port number
+ *
+ *	Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
+ *	with an I/O port target.
+ */
+
+static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
+{
+	/*
+	 * DMA from a port address -- set the io address
+	 */
+	
+	outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
+	outb(io_addr & 0xff, MCA_DMA_REG_EXE);
+	outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_set_dma_mode -	set the DMA mode
+ *	@dmanr: DMA channel
+ *	@mode: mode to set
+ *
+ *	The DMA controller supports several modes. The mode values you can
+ *	set are :
+ *
+ *	%MCA_DMA_MODE_READ when reading from the DMA device.
+ *
+ *	%MCA_DMA_MODE_WRITE to writing to the DMA device.
+ *
+ *	%MCA_DMA_MODE_IO to do DMA to or from an I/O port.
+ *
+ *	%MCA_DMA_MODE_16 to do 16bit transfers.
+ *
+ */
+
+static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
+	outb(mode, MCA_DMA_REG_EXE);
+}
+
+#endif /* MCA_DMA_H */
diff --git a/include/asm-i386/mman.h b/include/asm-i386/mman.h
new file mode 100644
index 000000000000..196619a83854
--- /dev/null
+++ b/include/asm-i386/mman.h
@@ -0,0 +1,43 @@
+#ifndef __I386_MMAN_H__
+#define __I386_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __I386_MMAN_H__ */
diff --git a/include/asm-i386/mmu.h b/include/asm-i386/mmu.h
new file mode 100644
index 000000000000..f431a0b86d4c
--- /dev/null
+++ b/include/asm-i386/mmu.h
@@ -0,0 +1,17 @@
+#ifndef __i386_MMU_H
+#define __i386_MMU_H
+
+#include <asm/semaphore.h>
+/*
+ * The i386 doesn't have a mmu context, but
+ * we put the segment information here.
+ *
+ * cpu_vm_mask is used to optimize ldt flushing.
+ */
+typedef struct { 
+	int size;
+	struct semaphore sem;
+	void *ldt;
+} mm_context_t;
+
+#endif
diff --git a/include/asm-i386/mmu_context.h b/include/asm-i386/mmu_context.h
new file mode 100644
index 000000000000..bf08218357ea
--- /dev/null
+++ b/include/asm-i386/mmu_context.h
@@ -0,0 +1,72 @@
+#ifndef __I386_SCHED_H
+#define __I386_SCHED_H
+
+#include <linux/config.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Used for LDT copy/destruction.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context(struct mm_struct *mm);
+
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	unsigned cpu = smp_processor_id();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_LAZY;
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		per_cpu(cpu_tlbstate, cpu).active_mm = next;
+#endif
+		cpu_set(cpu, next->cpu_vm_mask);
+
+		/* Re-load page tables */
+		load_cr3(next->pgd);
+
+		/*
+		 * load the LDT, if the LDT is different:
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_LDT_nolock(&next->context, cpu);
+	}
+#ifdef CONFIG_SMP
+	else {
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next);
+
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled 
+			 * tlb flush IPI delivery. We must reload %cr3.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context, cpu);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk, mm) \
+	asm("movl %0,%%fs ; movl %0,%%gs": :"r" (0))
+
+#define activate_mm(prev, next) \
+	switch_mm((prev),(next),NULL)
+
+#endif
diff --git a/include/asm-i386/mmx.h b/include/asm-i386/mmx.h
new file mode 100644
index 000000000000..46b71da99869
--- /dev/null
+++ b/include/asm-i386/mmx.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_MMX_H
+#define _ASM_MMX_H
+
+/*
+ *	MMX 3Dnow! helper operations
+ */
+
+#include <linux/types.h>
+ 
+extern void *_mmx_memcpy(void *to, const void *from, size_t size);
+extern void mmx_clear_page(void *page);
+extern void mmx_copy_page(void *to, void *from);
+
+#endif
diff --git a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h
new file mode 100644
index 000000000000..13830ae67cac
--- /dev/null
+++ b/include/asm-i386/mmzone.h
@@ -0,0 +1,147 @@
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/smp.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#ifdef CONFIG_NUMA
+	#ifdef CONFIG_X86_NUMAQ
+		#include <asm/numaq.h>
+	#else	/* summit or generic arch */
+		#include <asm/srat.h>
+	#endif
+#else /* !CONFIG_NUMA */
+	#define get_memcfg_numa get_memcfg_numa_flat
+	#define get_zholes_size(n) (0)
+#endif /* CONFIG_NUMA */
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[nid])
+
+/*
+ * generic node memory support, the following assumptions apply:
+ *
+ * 1) memory comes in 256Mb contigious chunks which are either present or not
+ * 2) we will not have more than 64Gb in total
+ *
+ * for now assume that 64Gb is max amount of RAM for whole system
+ *    64Gb / 4096bytes/page = 16777216 pages
+ */
+#define MAX_NR_PAGES 16777216
+#define MAX_ELEMENTS 256
+#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
+
+extern s8 physnode_map[];
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+#ifdef CONFIG_NUMA
+	return((int) physnode_map[(pfn) / PAGES_PER_ELEMENT]);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+#define reserve_bootmem(addr, size) \
+	reserve_bootmem_node(NODE_DATA(0), (addr), (size))
+#define alloc_bootmem(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+#define alloc_bootmem_node(ignore, x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_node(ignore, x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages_node(ignore, x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+
+#define node_localnr(pfn, nid)		((pfn) - node_data[nid]->node_start_pfn)
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define kvaddr_to_nid(kaddr)	pfn_to_nid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+
+#define local_mapnr(kvaddr)						\
+({									\
+	unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT;		\
+	(__pfn - node_start_pfn(pfn_to_nid(__pfn)));			\
+})
+
+/* XXX: FIXME -- wli */
+#define kern_addr_valid(kaddr)	(0)
+
+#define pfn_to_page(pfn)						\
+({									\
+	unsigned long __pfn = pfn;					\
+	int __node  = pfn_to_nid(__pfn);				\
+	&node_mem_map(__node)[node_localnr(__pfn,__node)];		\
+})
+
+#define page_to_pfn(pg)							\
+({									\
+	struct page *__page = pg;					\
+	struct zone *__zone = page_zone(__page);			\
+	(unsigned long)(__page - __zone->zone_mem_map)			\
+		+ __zone->zone_start_pfn;				\
+})
+
+#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
+#define pfn_valid(pfn)          ((pfn) < num_physpages)
+#else
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+#endif
+
+extern int get_memcfg_numa_flat(void );
+/*
+ * This allows any one NUMA architecture to be compiled
+ * for, and still fall back to the flat function if it
+ * fails.
+ */
+static inline void get_memcfg_numa(void)
+{
+#ifdef CONFIG_X86_NUMAQ
+	if (get_memcfg_numaq())
+		return;
+#elif CONFIG_ACPI_SRAT
+	if (get_memcfg_from_srat())
+		return;
+#endif
+
+	get_memcfg_numa_flat();
+}
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-i386/module.h b/include/asm-i386/module.h
new file mode 100644
index 000000000000..508865e26308
--- /dev/null
+++ b/include/asm-i386/module.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_I386_MODULE_H
+#define _ASM_I386_MODULE_H
+
+/* x86 is simple */
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#ifdef CONFIG_M386
+#define MODULE_PROC_FAMILY "386 "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_X86_ELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP2
+#define MODULE_PROC_FAMILY "WINCHIP2 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif CONFIG_MGEODE
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_REGPARM
+#define MODULE_REGPARM "REGPARM "
+#else
+#define MODULE_REGPARM ""
+#endif
+
+#ifdef CONFIG_4KSTACKS
+#define MODULE_STACKSIZE "4KSTACKS "
+#else
+#define MODULE_STACKSIZE ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_REGPARM MODULE_STACKSIZE
+
+#endif /* _ASM_I386_MODULE_H */
diff --git a/include/asm-i386/mpspec.h b/include/asm-i386/mpspec.h
new file mode 100644
index 000000000000..d9fafba075bc
--- /dev/null
+++ b/include/asm-i386/mpspec.h
@@ -0,0 +1,83 @@
+#ifndef __ASM_MPSPEC_H
+#define __ASM_MPSPEC_H
+
+#include <linux/cpumask.h>
+#include <asm/mpspec_def.h>
+#include <mach_mpspec.h>
+
+extern int mp_bus_id_to_type [MAX_MP_BUSSES];
+extern int mp_bus_id_to_node [MAX_MP_BUSSES];
+extern int mp_bus_id_to_local [MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
+
+extern unsigned int boot_cpu_physical_apicid;
+extern int smp_found_config;
+extern void find_smp_config (void);
+extern void get_smp_config (void);
+extern int nr_ioapics;
+extern int apic_version [MAX_APICS];
+extern int mp_bus_id_to_type [MAX_MP_BUSSES];
+extern int mp_irq_entries;
+extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES];
+extern int mpc_default_type;
+extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
+extern unsigned long mp_lapic_addr;
+extern int pic_mode;
+extern int using_apic_timer;
+
+#ifdef CONFIG_ACPI_BOOT
+extern void mp_register_lapic (u8 id, u8 enabled);
+extern void mp_register_lapic_address (u64 address);
+extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
+extern void mp_config_acpi_legacy_irqs (void);
+extern int mp_register_gsi (u32 gsi, int edge_level, int active_high_low);
+#endif /*CONFIG_ACPI_BOOT*/
+
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+
+struct physid_mask
+{
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)			set_bit(physid, (map).mask)
+#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)		test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)	test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)		bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_or(dst, src1, src2)		bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_clear(map)			bitmap_zero((map).mask, MAX_APICS)
+#define physids_complement(dst, src)		bitmap_complement((dst).mask,(src).mask, MAX_APICS)
+#define physids_empty(map)			bitmap_empty((map).mask, MAX_APICS)
+#define physids_equal(map1, map2)		bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+#define physids_weight(map)			bitmap_weight((map).mask, MAX_APICS)
+#define physids_shift_right(d, s, n)		bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+#define physids_shift_left(d, s, n)		bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+#define physids_coerce(map)			((map).mask[0])
+
+#define physids_promote(physids)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		__physid_mask.mask[0] = physids;				\
+		__physid_mask;							\
+	})
+
+#define physid_mask_of_physid(physid)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		physid_set(physid, __physid_mask);				\
+		__physid_mask;							\
+	})
+
+#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+#endif
+
diff --git a/include/asm-i386/mpspec_def.h b/include/asm-i386/mpspec_def.h
new file mode 100644
index 000000000000..a961093dbf88
--- /dev/null
+++ b/include/asm-i386/mpspec_def.h
@@ -0,0 +1,188 @@
+#ifndef __ASM_MPSPEC_DEF_H
+#define __ASM_MPSPEC_DEF_H
+
+/*
+ * Structure definitions for SMP machines following the
+ * Intel Multiprocessing Specification 1.1 and 1.4.
+ */
+
+/*
+ * This tag identifies where the SMP configuration
+ * information is. 
+ */
+ 
+#define SMP_MAGIC_IDENT	(('_'<<24)|('P'<<16)|('M'<<8)|'_')
+
+#define MAX_MPC_ENTRY 1024
+#define MAX_APICS      256
+
+struct intel_mp_floating
+{
+	char mpf_signature[4];		/* "_MP_" 			*/
+	unsigned long mpf_physptr;	/* Configuration table address	*/
+	unsigned char mpf_length;	/* Our length (paragraphs)	*/
+	unsigned char mpf_specification;/* Specification version	*/
+	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
+	unsigned char mpf_feature1;	/* Standard or configuration ? 	*/
+	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
+	unsigned char mpf_feature3;	/* Unused (0)			*/
+	unsigned char mpf_feature4;	/* Unused (0)			*/
+	unsigned char mpf_feature5;	/* Unused (0)			*/
+};
+
+struct mp_config_table
+{
+	char mpc_signature[4];
+#define MPC_SIGNATURE "PCMP"
+	unsigned short mpc_length;	/* Size of table */
+	char  mpc_spec;			/* 0x01 */
+	char  mpc_checksum;
+	char  mpc_oem[8];
+	char  mpc_productid[12];
+	unsigned long mpc_oemptr;	/* 0 if not present */
+	unsigned short mpc_oemsize;	/* 0 if not present */
+	unsigned short mpc_oemcount;
+	unsigned long mpc_lapic;	/* APIC address */
+	unsigned long reserved;
+};
+
+/* Followed by entries */
+
+#define	MP_PROCESSOR	0
+#define	MP_BUS		1
+#define	MP_IOAPIC	2
+#define	MP_INTSRC	3
+#define	MP_LINTSRC	4
+#define	MP_TRANSLATION  192  /* Used by IBM NUMA-Q to describe node locality */
+
+struct mpc_config_processor
+{
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;	/* Local APIC number */
+	unsigned char mpc_apicver;	/* Its versions */
+	unsigned char mpc_cpuflag;
+#define CPU_ENABLED		1	/* Processor is available */
+#define CPU_BOOTPROCESSOR	2	/* Processor is the BP */
+	unsigned long mpc_cpufeature;		
+#define CPU_STEPPING_MASK 0x0F
+#define CPU_MODEL_MASK	0xF0
+#define CPU_FAMILY_MASK	0xF00
+	unsigned long mpc_featureflag;	/* CPUID feature value */
+	unsigned long mpc_reserved[2];
+};
+
+struct mpc_config_bus
+{
+	unsigned char mpc_type;
+	unsigned char mpc_busid;
+	unsigned char mpc_bustype[6] __attribute((packed));
+};
+
+/* List of Bus Type string values, Intel MP Spec. */
+#define BUSTYPE_EISA	"EISA"
+#define BUSTYPE_ISA	"ISA"
+#define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
+#define BUSTYPE_MCA	"MCA"
+#define BUSTYPE_VL	"VL"		/* Local bus */
+#define BUSTYPE_PCI	"PCI"
+#define BUSTYPE_PCMCIA	"PCMCIA"
+#define BUSTYPE_CBUS	"CBUS"
+#define BUSTYPE_CBUSII	"CBUSII"
+#define BUSTYPE_FUTURE	"FUTURE"
+#define BUSTYPE_MBI	"MBI"
+#define BUSTYPE_MBII	"MBII"
+#define BUSTYPE_MPI	"MPI"
+#define BUSTYPE_MPSA	"MPSA"
+#define BUSTYPE_NUBUS	"NUBUS"
+#define BUSTYPE_TC	"TC"
+#define BUSTYPE_VME	"VME"
+#define BUSTYPE_XPRESS	"XPRESS"
+#define BUSTYPE_NEC98	"NEC98"
+
+struct mpc_config_ioapic
+{
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;
+	unsigned char mpc_apicver;
+	unsigned char mpc_flags;
+#define MPC_APIC_USABLE		0x01
+	unsigned long mpc_apicaddr;
+};
+
+struct mpc_config_intsrc
+{
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbus;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_dstapic;
+	unsigned char mpc_dstirq;
+};
+
+enum mp_irq_source_types {
+	mp_INT = 0,
+	mp_NMI = 1,
+	mp_SMI = 2,
+	mp_ExtINT = 3
+};
+
+#define MP_IRQDIR_DEFAULT	0
+#define MP_IRQDIR_HIGH		1
+#define MP_IRQDIR_LOW		3
+
+
+struct mpc_config_lintsrc
+{
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbusid;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_destapic;	
+#define MP_APIC_ALL	0xFF
+	unsigned char mpc_destapiclint;
+};
+
+struct mp_config_oemtable
+{
+	char oem_signature[4];
+#define MPC_OEM_SIGNATURE "_OEM"
+	unsigned short oem_length;	/* Size of table */
+	char  oem_rev;			/* 0x01 */
+	char  oem_checksum;
+	char  mpc_oem[8];
+};
+
+struct mpc_config_translation
+{
+        unsigned char mpc_type;
+        unsigned char trans_len;
+        unsigned char trans_type;
+        unsigned char trans_quad;
+        unsigned char trans_global;
+        unsigned char trans_local;
+        unsigned short trans_reserved;
+};
+
+/*
+ *	Default configurations
+ *
+ *	1	2 CPU ISA 82489DX
+ *	2	2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
+ *	3	2 CPU EISA 82489DX
+ *	4	2 CPU MCA 82489DX
+ *	5	2 CPU ISA+PCI
+ *	6	2 CPU EISA+PCI
+ *	7	2 CPU MCA+PCI
+ */
+
+enum mp_bustype {
+	MP_BUS_ISA = 1,
+	MP_BUS_EISA,
+	MP_BUS_PCI,
+	MP_BUS_MCA,
+	MP_BUS_NEC98
+};
+#endif
+
diff --git a/include/asm-i386/msgbuf.h b/include/asm-i386/msgbuf.h
new file mode 100644
index 000000000000..b8d659c157ae
--- /dev/null
+++ b/include/asm-i386/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _I386_MSGBUF_H
+#define _I386_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _I386_MSGBUF_H */
diff --git a/include/asm-i386/msi.h b/include/asm-i386/msi.h
new file mode 100644
index 000000000000..b85393094c83
--- /dev/null
+++ b/include/asm-i386/msi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2003-2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef ASM_MSI_H
+#define ASM_MSI_H
+
+#include <asm/desc.h>
+#include <mach_apic.h>
+
+#define LAST_DEVICE_VECTOR		232
+#define MSI_DEST_MODE			MSI_LOGICAL_MODE
+#define MSI_TARGET_CPU_SHIFT		12
+
+#ifdef CONFIG_SMP
+#define MSI_TARGET_CPU		logical_smp_processor_id()
+#else
+#define MSI_TARGET_CPU	cpu_to_logical_apicid(first_cpu(cpu_online_map))
+#endif
+
+#endif /* ASM_MSI_H */
diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h
new file mode 100644
index 000000000000..c76fce8badbb
--- /dev/null
+++ b/include/asm-i386/msr.h
@@ -0,0 +1,272 @@
+#ifndef __ASM_MSR_H
+#define __ASM_MSR_H
+
+/*
+ * Access to machine-specific registers (available on 586 and better only)
+ * Note: the rd* operations modify the parameters directly (without using
+ * pointer indirection), this allows gcc to optimize better
+ */
+
+#define rdmsr(msr,val1,val2) \
+	__asm__ __volatile__("rdmsr" \
+			  : "=a" (val1), "=d" (val2) \
+			  : "c" (msr))
+
+#define wrmsr(msr,val1,val2) \
+	__asm__ __volatile__("wrmsr" \
+			  : /* no outputs */ \
+			  : "c" (msr), "a" (val1), "d" (val2))
+
+#define rdmsrl(msr,val) do { \
+	unsigned long l__,h__; \
+	rdmsr (msr, l__, h__);  \
+	val = l__;  \
+	val |= ((u64)h__<<32);  \
+} while(0)
+
+static inline void wrmsrl (unsigned long msr, unsigned long long val)
+{
+	unsigned long lo, hi;
+	lo = (unsigned long) val;
+	hi = val >> 32;
+	wrmsr (msr, lo, hi);
+}
+
+/* wrmsr with exception handling */
+#define wrmsr_safe(msr,a,b) ({ int ret__;						\
+	asm volatile("2: wrmsr ; xorl %0,%0\n"						\
+		     "1:\n\t"								\
+		     ".section .fixup,\"ax\"\n\t"					\
+		     "3:  movl %4,%0 ; jmp 1b\n\t"					\
+		     ".previous\n\t"							\
+ 		     ".section __ex_table,\"a\"\n"					\
+		     "   .align 4\n\t"							\
+		     "   .long 	2b,3b\n\t"						\
+		     ".previous"							\
+		     : "=a" (ret__)							\
+		     : "c" (msr), "0" (a), "d" (b), "i" (-EFAULT));\
+	ret__; })
+
+#define rdtsc(low,high) \
+     __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))
+
+#define rdtscl(low) \
+     __asm__ __volatile__("rdtsc" : "=a" (low) : : "edx")
+
+#define rdtscll(val) \
+     __asm__ __volatile__("rdtsc" : "=A" (val))
+
+#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
+
+#define rdpmc(counter,low,high) \
+     __asm__ __volatile__("rdpmc" \
+			  : "=a" (low), "=d" (high) \
+			  : "c" (counter))
+
+/* symbolic names for some interesting MSRs */
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR		0
+#define MSR_IA32_P5_MC_TYPE		1
+#define MSR_IA32_PLATFORM_ID		0x17
+#define MSR_IA32_EBL_CR_POWERON		0x2a
+
+#define MSR_IA32_APICBASE		0x1b
+#define MSR_IA32_APICBASE_BSP		(1<<8)
+#define MSR_IA32_APICBASE_ENABLE	(1<<11)
+#define MSR_IA32_APICBASE_BASE		(0xfffff<<12)
+
+#define MSR_IA32_UCODE_WRITE		0x79
+#define MSR_IA32_UCODE_REV		0x8b
+
+#define MSR_P6_PERFCTR0		0xc1
+#define MSR_P6_PERFCTR1		0xc2
+
+#define MSR_IA32_BBL_CR_CTL		0x119
+
+#define MSR_IA32_SYSENTER_CS		0x174
+#define MSR_IA32_SYSENTER_ESP		0x175
+#define MSR_IA32_SYSENTER_EIP		0x176
+
+#define MSR_IA32_MCG_CAP		0x179
+#define MSR_IA32_MCG_STATUS		0x17a
+#define MSR_IA32_MCG_CTL		0x17b
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX		0x180
+#define MSR_IA32_MCG_EBX		0x181
+#define MSR_IA32_MCG_ECX		0x182
+#define MSR_IA32_MCG_EDX		0x183
+#define MSR_IA32_MCG_ESI		0x184
+#define MSR_IA32_MCG_EDI		0x185
+#define MSR_IA32_MCG_EBP		0x186
+#define MSR_IA32_MCG_ESP		0x187
+#define MSR_IA32_MCG_EFLAGS		0x188
+#define MSR_IA32_MCG_EIP		0x189
+#define MSR_IA32_MCG_RESERVED		0x18A
+
+#define MSR_P6_EVNTSEL0			0x186
+#define MSR_P6_EVNTSEL1			0x187
+
+#define MSR_IA32_PERF_STATUS		0x198
+#define MSR_IA32_PERF_CTL		0x199
+
+#define MSR_IA32_THERM_CONTROL		0x19a
+#define MSR_IA32_THERM_INTERRUPT	0x19b
+#define MSR_IA32_THERM_STATUS		0x19c
+#define MSR_IA32_MISC_ENABLE		0x1a0
+
+#define MSR_IA32_DEBUGCTLMSR		0x1d9
+#define MSR_IA32_LASTBRANCHFROMIP	0x1db
+#define MSR_IA32_LASTBRANCHTOIP		0x1dc
+#define MSR_IA32_LASTINTFROMIP		0x1dd
+#define MSR_IA32_LASTINTTOIP		0x1de
+
+#define MSR_IA32_MC0_CTL		0x400
+#define MSR_IA32_MC0_STATUS		0x401
+#define MSR_IA32_MC0_ADDR		0x402
+#define MSR_IA32_MC0_MISC		0x403
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0 		0x300
+#define MSR_P4_BPU_PERFCTR1 		0x301
+#define MSR_P4_BPU_PERFCTR2 		0x302
+#define MSR_P4_BPU_PERFCTR3 		0x303
+#define MSR_P4_MS_PERFCTR0 		0x304
+#define MSR_P4_MS_PERFCTR1 		0x305
+#define MSR_P4_MS_PERFCTR2 		0x306
+#define MSR_P4_MS_PERFCTR3 		0x307
+#define MSR_P4_FLAME_PERFCTR0 		0x308
+#define MSR_P4_FLAME_PERFCTR1 		0x309
+#define MSR_P4_FLAME_PERFCTR2 		0x30a
+#define MSR_P4_FLAME_PERFCTR3 		0x30b
+#define MSR_P4_IQ_PERFCTR0 		0x30c
+#define MSR_P4_IQ_PERFCTR1 		0x30d
+#define MSR_P4_IQ_PERFCTR2 		0x30e
+#define MSR_P4_IQ_PERFCTR3 		0x30f
+#define MSR_P4_IQ_PERFCTR4 		0x310
+#define MSR_P4_IQ_PERFCTR5 		0x311
+#define MSR_P4_BPU_CCCR0 		0x360
+#define MSR_P4_BPU_CCCR1 		0x361
+#define MSR_P4_BPU_CCCR2 		0x362
+#define MSR_P4_BPU_CCCR3 		0x363
+#define MSR_P4_MS_CCCR0 		0x364
+#define MSR_P4_MS_CCCR1 		0x365
+#define MSR_P4_MS_CCCR2 		0x366
+#define MSR_P4_MS_CCCR3 		0x367
+#define MSR_P4_FLAME_CCCR0 		0x368
+#define MSR_P4_FLAME_CCCR1 		0x369
+#define MSR_P4_FLAME_CCCR2 		0x36a
+#define MSR_P4_FLAME_CCCR3 		0x36b
+#define MSR_P4_IQ_CCCR0 		0x36c
+#define MSR_P4_IQ_CCCR1 		0x36d
+#define MSR_P4_IQ_CCCR2 		0x36e
+#define MSR_P4_IQ_CCCR3 		0x36f
+#define MSR_P4_IQ_CCCR4 		0x370
+#define MSR_P4_IQ_CCCR5 		0x371
+#define MSR_P4_ALF_ESCR0 		0x3ca
+#define MSR_P4_ALF_ESCR1 		0x3cb
+#define MSR_P4_BPU_ESCR0 		0x3b2
+#define MSR_P4_BPU_ESCR1 		0x3b3
+#define MSR_P4_BSU_ESCR0 		0x3a0
+#define MSR_P4_BSU_ESCR1 		0x3a1
+#define MSR_P4_CRU_ESCR0 		0x3b8
+#define MSR_P4_CRU_ESCR1 		0x3b9
+#define MSR_P4_CRU_ESCR2 		0x3cc
+#define MSR_P4_CRU_ESCR3 		0x3cd
+#define MSR_P4_CRU_ESCR4 		0x3e0
+#define MSR_P4_CRU_ESCR5 		0x3e1
+#define MSR_P4_DAC_ESCR0 		0x3a8
+#define MSR_P4_DAC_ESCR1 		0x3a9
+#define MSR_P4_FIRM_ESCR0 		0x3a4
+#define MSR_P4_FIRM_ESCR1 		0x3a5
+#define MSR_P4_FLAME_ESCR0 		0x3a6
+#define MSR_P4_FLAME_ESCR1 		0x3a7
+#define MSR_P4_FSB_ESCR0 		0x3a2
+#define MSR_P4_FSB_ESCR1 		0x3a3
+#define MSR_P4_IQ_ESCR0 		0x3ba
+#define MSR_P4_IQ_ESCR1 		0x3bb
+#define MSR_P4_IS_ESCR0 		0x3b4
+#define MSR_P4_IS_ESCR1 		0x3b5
+#define MSR_P4_ITLB_ESCR0 		0x3b6
+#define MSR_P4_ITLB_ESCR1 		0x3b7
+#define MSR_P4_IX_ESCR0 		0x3c8
+#define MSR_P4_IX_ESCR1 		0x3c9
+#define MSR_P4_MOB_ESCR0 		0x3aa
+#define MSR_P4_MOB_ESCR1 		0x3ab
+#define MSR_P4_MS_ESCR0 		0x3c0
+#define MSR_P4_MS_ESCR1 		0x3c1
+#define MSR_P4_PMH_ESCR0 		0x3ac
+#define MSR_P4_PMH_ESCR1 		0x3ad
+#define MSR_P4_RAT_ESCR0 		0x3bc
+#define MSR_P4_RAT_ESCR1 		0x3bd
+#define MSR_P4_SAAT_ESCR0 		0x3ae
+#define MSR_P4_SAAT_ESCR1 		0x3af
+#define MSR_P4_SSU_ESCR0 		0x3be
+#define MSR_P4_SSU_ESCR1 		0x3bf    /* guess: not defined in manual */
+#define MSR_P4_TBPU_ESCR0 		0x3c2
+#define MSR_P4_TBPU_ESCR1 		0x3c3
+#define MSR_P4_TC_ESCR0 		0x3c4
+#define MSR_P4_TC_ESCR1 		0x3c5
+#define MSR_P4_U2L_ESCR0 		0x3b0
+#define MSR_P4_U2L_ESCR1 		0x3b1
+
+/* AMD Defined MSRs */
+#define MSR_K6_EFER			0xC0000080
+#define MSR_K6_STAR			0xC0000081
+#define MSR_K6_WHCR			0xC0000082
+#define MSR_K6_UWCCR			0xC0000085
+#define MSR_K6_EPMR			0xC0000086
+#define MSR_K6_PSOR			0xC0000087
+#define MSR_K6_PFIR			0xC0000088
+
+#define MSR_K7_EVNTSEL0			0xC0010000
+#define MSR_K7_EVNTSEL1			0xC0010001
+#define MSR_K7_EVNTSEL2			0xC0010002
+#define MSR_K7_EVNTSEL3			0xC0010003
+#define MSR_K7_PERFCTR0			0xC0010004
+#define MSR_K7_PERFCTR1			0xC0010005
+#define MSR_K7_PERFCTR2			0xC0010006
+#define MSR_K7_PERFCTR3			0xC0010007
+#define MSR_K7_HWCR			0xC0010015
+#define MSR_K7_CLK_CTL			0xC001001b
+#define MSR_K7_FID_VID_CTL		0xC0010041
+#define MSR_K7_FID_VID_STATUS		0xC0010042
+
+/* extended feature register */
+#define MSR_EFER 			0xc0000080
+
+/* EFER bits: */
+
+/* Execute Disable enable */
+#define _EFER_NX			11
+#define EFER_NX				(1<<_EFER_NX)
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1			0x107
+#define MSR_IDT_FCR2			0x108
+#define MSR_IDT_FCR3			0x109
+#define MSR_IDT_FCR4			0x10a
+
+#define MSR_IDT_MCR0			0x110
+#define MSR_IDT_MCR1			0x111
+#define MSR_IDT_MCR2			0x112
+#define MSR_IDT_MCR3			0x113
+#define MSR_IDT_MCR4			0x114
+#define MSR_IDT_MCR5			0x115
+#define MSR_IDT_MCR6			0x116
+#define MSR_IDT_MCR7			0x117
+#define MSR_IDT_MCR_CTRL		0x120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR			0x1107
+#define MSR_VIA_LONGHAUL		0x110a
+#define MSR_VIA_RNG			0x110b
+#define MSR_VIA_BCR2			0x1147
+
+/* Transmeta defined MSRs */
+#define MSR_TMTA_LONGRUN_CTRL		0x80868010
+#define MSR_TMTA_LONGRUN_FLAGS		0x80868011
+#define MSR_TMTA_LRTI_READOUT		0x80868018
+#define MSR_TMTA_LRTI_VOLT_MHZ		0x8086801a
+
+#endif /* __ASM_MSR_H */
diff --git a/include/asm-i386/mtrr.h b/include/asm-i386/mtrr.h
new file mode 100644
index 000000000000..5b6ceda68c5f
--- /dev/null
+++ b/include/asm-i386/mtrr.h
@@ -0,0 +1,107 @@
+/*  Generic MTRR (Memory Type Range Register) ioctls.
+
+    Copyright (C) 1997-1999  Richard Gooch
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _LINUX_MTRR_H
+#define _LINUX_MTRR_H
+
+#include <linux/config.h>
+#include <linux/ioctl.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+struct mtrr_sentry
+{
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+struct mtrr_gentry
+{
+    unsigned int regnum;   /*  Register number  */
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/*  These are the region types  */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+#ifdef __KERNEL__
+
+/*  The following functions are for use by other drivers  */
+# ifdef CONFIG_MTRR
+extern int mtrr_add (unsigned long base, unsigned long size,
+		     unsigned int type, char increment);
+extern int mtrr_add_page (unsigned long base, unsigned long size,
+		     unsigned int type, char increment);
+extern int mtrr_del (int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page (int reg, unsigned long base, unsigned long size);
+extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
+#  else
+static __inline__ int mtrr_add (unsigned long base, unsigned long size,
+				unsigned int type, char increment)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_add_page (unsigned long base, unsigned long size,
+				unsigned int type, char increment)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_del (int reg, unsigned long base,
+				unsigned long size)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_del_page (int reg, unsigned long base,
+				unsigned long size)
+{
+    return -ENODEV;
+}
+
+static __inline__ void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) {;}
+
+#  endif
+
+#endif
+
+#endif  /*  _LINUX_MTRR_H  */
diff --git a/include/asm-i386/namei.h b/include/asm-i386/namei.h
new file mode 100644
index 000000000000..814865088617
--- /dev/null
+++ b/include/asm-i386/namei.h
@@ -0,0 +1,17 @@
+/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
+ * linux/include/asm-i386/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __I386_NAMEI_H
+#define __I386_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __I386_NAMEI_H */
diff --git a/include/asm-i386/nmi.h b/include/asm-i386/nmi.h
new file mode 100644
index 000000000000..21f16638fc61
--- /dev/null
+++ b/include/asm-i386/nmi.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-i386/nmi.h
+ */
+#ifndef ASM_NMI_H
+#define ASM_NMI_H
+
+#include <linux/pm.h>
+ 
+struct pt_regs;
+ 
+typedef int (*nmi_callback_t)(struct pt_regs * regs, int cpu);
+ 
+/** 
+ * set_nmi_callback
+ *
+ * Set a handler for an NMI. Only one handler may be
+ * set. Return 1 if the NMI was handled.
+ */
+void set_nmi_callback(nmi_callback_t callback);
+ 
+/** 
+ * unset_nmi_callback
+ *
+ * Remove the handler previously set.
+ */
+void unset_nmi_callback(void);
+ 
+#endif /* ASM_NMI_H */
diff --git a/include/asm-i386/node.h b/include/asm-i386/node.h
new file mode 100644
index 000000000000..e13c6ffa72ae
--- /dev/null
+++ b/include/asm-i386/node.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_I386_NODE_H_
+#define _ASM_I386_NODE_H_
+
+#include <linux/device.h>
+#include <linux/mmzone.h>
+#include <linux/node.h>
+#include <linux/topology.h>
+#include <linux/nodemask.h>
+
+struct i386_node {
+	struct node node;
+};
+extern struct i386_node node_devices[MAX_NUMNODES];
+
+static inline int arch_register_node(int num){
+	int p_node;
+	struct node *parent = NULL;
+
+	if (!node_online(num))
+		return 0;
+	p_node = parent_node(num);
+
+	if (p_node != num)
+		parent = &node_devices[p_node].node;
+
+	return register_node(&node_devices[num].node, num, parent);
+}
+
+#endif /* _ASM_I386_NODE_H_ */
diff --git a/include/asm-i386/numaq.h b/include/asm-i386/numaq.h
new file mode 100644
index 000000000000..38f710dc37f2
--- /dev/null
+++ b/include/asm-i386/numaq.h
@@ -0,0 +1,164 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#ifndef NUMAQ_H
+#define NUMAQ_H
+
+#ifdef CONFIG_X86_NUMAQ
+
+extern int get_memcfg_numaq(void);
+
+/*
+ * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
+ */
+#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private quad space */
+
+/*
+ * Communication area for each processor on lynxer-processor tests.
+ *
+ * NOTE: If you change the size of this eachproc structure you need
+ *       to change the definition for EACH_QUAD_SIZE.
+ */
+struct eachquadmem {
+	unsigned int	priv_mem_start;		/* Starting address of this */
+						/* quad's private memory. */
+						/* This is always 0. */
+						/* In MB. */
+	unsigned int	priv_mem_size;		/* Size of this quad's */
+						/* private memory. */
+						/* In MB. */
+	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
+						/* quad's low shared block */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_start;	/* Starting address of this */
+						/* quad's low shared memory */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	lmmio_copb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	io_apic_0_start;	/* Starting address of I/O */
+						/* APIC 0. */
+	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
+	unsigned int	io_apic_1_start;	/* Starting address of I/O */
+						/* APIC 1. */
+	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
+	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
+						/* quad's high shared memory.*/
+						/* In MB. */
+	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	mps_table_addr;		/* Address of this quad's */
+						/* MPS tables from BIOS, */
+						/* in system space.*/
+	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
+						/* local access of MDC. */
+	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
+						/* remote access of MDC. */
+	unsigned int	mm_port_io_start;	/* Starting address of this */
+						/* quad's memory mapped Port */
+						/* I/O space. */
+	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
+						/* mapped Port I/O space. */
+	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
+						/* quad's memory mapped */
+						/* remote I/O APIC space. */
+	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
+						/* mapped remote I/O APIC */
+						/* space. */
+	unsigned int	mm_isa_start;		/* Starting address of this */
+						/* quad's memory mapped ISA */
+						/* space (contains MDC */
+						/* memory space). */
+	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
+						/* mapped ISA space (contains*/
+						/* MDC memory space). */
+	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
+	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
+};
+
+/*
+ * Note: This structure must be NOT be changed unless the multiproc and
+ * OS are changed to reflect the new structure.
+ */
+struct sys_cfg_data {
+	unsigned int	quad_id;
+	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
+	unsigned int	scd_version; /* Version number of this table. */
+	unsigned int	first_quad_id;
+	unsigned int	quads_present31_0; /* 1 bit for each quad */
+	unsigned int	quads_present63_32; /* 1 bit for each quad */
+	unsigned int	config_flags;
+	unsigned int	boot_flags;
+	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
+	unsigned int	csr_size; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
+	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
+	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
+					/* may not be totally populated */
+	unsigned int	split_mem_enbl; /* 0 for no low shared memory */ 
+	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
+				 /* (in MB). */
+	unsigned int	quad_spin_lock; /* Spare location used for quad */
+					/* bringup. */
+	unsigned int	nonzero55; /* For checksumming. */
+	unsigned int	nonzeroaa; /* For checksumming. */
+	unsigned int	scd_magic_number;
+	unsigned int	system_type;
+	unsigned int	checksum;
+	/*
+	 *	memory configuration area for each quad
+	 */
+        struct	eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
+};
+
+static inline unsigned long *get_zholes_size(int nid)
+{
+	return NULL;
+}
+#endif /* CONFIG_X86_NUMAQ */
+#endif /* NUMAQ_H */
+
diff --git a/include/asm-i386/numnodes.h b/include/asm-i386/numnodes.h
new file mode 100644
index 000000000000..a61f38c8176f
--- /dev/null
+++ b/include/asm-i386/numnodes.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_X86_NUMAQ
+
+/* Max 16 Nodes */
+#define NODES_SHIFT	4
+
+#elif defined(CONFIG_ACPI_SRAT)
+
+/* Max 8 Nodes */
+#define NODES_SHIFT	3
+
+#endif /* CONFIG_X86_NUMAQ */
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h
new file mode 100644
index 000000000000..ed13969fa2d6
--- /dev/null
+++ b/include/asm-i386/page.h
@@ -0,0 +1,153 @@
+#ifndef _I386_PAGE_H
+#define _I386_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1))
+#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_X86_USE_3DNOW
+
+#include <asm/mmx.h>
+
+#define clear_page(page)	mmx_clear_page((void *)(page))
+#define copy_page(to,from)	mmx_copy_page(to,from)
+
+#else
+
+/*
+ *	On older X86 processors it's not a win to use MMX here it seems.
+ *	Maybe the K6-III ?
+ */
+ 
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#endif
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+extern int nx_enabled;
+#ifdef CONFIG_X86_PAE
+extern unsigned long long __supported_pte_mask;
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pmd; } pmd_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+#define pmd_val(x)	((x).pmd)
+#define pte_val(x)	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pmd(x) ((pmd_t) { (x) } )
+#define HPAGE_SHIFT	21
+#else
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define boot_pte_t pte_t /* or would you rather have a typedef */
+#define pte_val(x)	((x).pte_low)
+#define HPAGE_SHIFT	22
+#endif
+#define PTE_MASK	PAGE_MASK
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB. 
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+extern unsigned int __VMALLOC_RESERVE;
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+extern int sysctl_legacy_va_layout;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+#define __PAGE_OFFSET		(0xC0000000)
+#else
+#define __PAGE_OFFSET		(0xC0000000UL)
+#endif
+
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+#define VMALLOC_RESERVE		((unsigned long)__VMALLOC_RESERVE)
+#define MAXMEM			(-__PAGE_OFFSET-__VMALLOC_RESERVE)
+#define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif /* !CONFIG_DISCONTIGMEM */
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _I386_PAGE_H */
diff --git a/include/asm-i386/param.h b/include/asm-i386/param.h
new file mode 100644
index 000000000000..b6440526e42a
--- /dev/null
+++ b/include/asm-i386/param.h
@@ -0,0 +1,23 @@
+#ifndef _ASMi386_PARAM_H
+#define _ASMi386_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		1000		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC		(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif
diff --git a/include/asm-i386/parport.h b/include/asm-i386/parport.h
new file mode 100644
index 000000000000..fa0e321e498e
--- /dev/null
+++ b/include/asm-i386/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: ia32-specific parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_I386_PARPORT_H
+#define _ASM_I386_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_I386_PARPORT_H) */
diff --git a/include/asm-i386/pci-direct.h b/include/asm-i386/pci-direct.h
new file mode 100644
index 000000000000..4f6738b08206
--- /dev/null
+++ b/include/asm-i386/pci-direct.h
@@ -0,0 +1 @@
+#include "asm-x86_64/pci-direct.h"
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
new file mode 100644
index 000000000000..fb749b85a739
--- /dev/null
+++ b/include/asm-i386/pci.h
@@ -0,0 +1,110 @@
+#ifndef __i386_PCI_H
+#define __i386_PCI_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+#include <linux/mm.h>		/* for struct page */
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+extern unsigned int pcibios_assign_all_busses(void);
+#else
+#define pcibios_assign_all_busses()	0
+#endif
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		(pci_mem_start)
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+void pcibios_config_init(void);
+struct pci_bus * pcibios_scan_root(int bus);
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+struct irq_routing_table *pcibios_get_irq_routing_table(void);
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)	(1)
+
+static inline dma64_addr_t
+pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
+{
+	return ((dma64_addr_t) page_to_phys(page) +
+		(dma64_addr_t) offset);
+}
+
+static inline struct page *
+pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	return pfn_to_page(dma_addr >> PAGE_SHIFT);
+}
+
+static inline unsigned long
+pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	return (dma_addr & ~PAGE_MASK);
+}
+
+static inline void
+pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+}
+
+static inline void
+pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+	flush_write_buffers();
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state, int write_combine);
+
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __i386_PCI_H */
diff --git a/include/asm-i386/percpu.h b/include/asm-i386/percpu.h
new file mode 100644
index 000000000000..5764afa4b6a4
--- /dev/null
+++ b/include/asm-i386/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_I386_PERCPU__
+#define __ARCH_I386_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_I386_PERCPU__ */
diff --git a/include/asm-i386/pgalloc.h b/include/asm-i386/pgalloc.h
new file mode 100644
index 000000000000..0380c3dc1f7e
--- /dev/null
+++ b/include/asm-i386/pgalloc.h
@@ -0,0 +1,50 @@
+#ifndef _I386_PGALLOC_H
+#define _I386_PGALLOC_H
+
+#include <linux/config.h>
+#include <asm/fixmap.h>
+#include <linux/threads.h>
+#include <linux/mm.h>		/* for struct page */
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+
+#define pmd_populate(mm, pmd, pte) 				\
+	set_pmd(pmd, __pmd(_PAGE_TABLE +			\
+		((unsigned long long)page_to_pfn(pte) <<	\
+			(unsigned long long) PAGE_SHIFT)))
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+#ifdef CONFIG_X86_PAE
+/*
+ * In the PAE case we free the pmds as part of the pgd.
+ */
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define pud_populate(mm, pmd, pte)	BUG()
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _I386_PGALLOC_H */
diff --git a/include/asm-i386/pgtable-2level-defs.h b/include/asm-i386/pgtable-2level-defs.h
new file mode 100644
index 000000000000..02518079f816
--- /dev/null
+++ b/include/asm-i386/pgtable-2level-defs.h
@@ -0,0 +1,18 @@
+#ifndef _I386_PGTABLE_2LEVEL_DEFS_H
+#define _I386_PGTABLE_2LEVEL_DEFS_H
+
+/*
+ * traditional i386 two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * the i386 is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+
+#define PTRS_PER_PTE	1024
+
+#endif /* _I386_PGTABLE_2LEVEL_DEFS_H */
diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h
new file mode 100644
index 000000000000..fa07bd6c7529
--- /dev/null
+++ b/include/asm-i386/pgtable-2level.h
@@ -0,0 +1,69 @@
+#ifndef _I386_PGTABLE_2LEVEL_H
+#define _I386_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval)
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+
+#define ptep_get_and_clear(mm,addr,xp)	__pte(xchg(&(xp)->pte_low, 0))
+#define pte_same(a, b)		((a).pte_low == (b).pte_low)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_none(x)		(!(x).pte_low)
+#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pmd_page_kernel(pmd) \
+((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+	return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+	return 1;
+}
+
+/*
+ * Bits 0, 6 and 7 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(pte) \
+	((((pte).pte_low >> 1) & 0x1f ) + (((pte).pte_low >> 8) << 5 ))
+
+#define pgoff_to_pte(off) \
+	((pte_t) { (((off) & 0x1f) << 1) + (((off) >> 5) << 8) + _PAGE_FILE })
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x1f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_low })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#endif /* _I386_PGTABLE_2LEVEL_H */
diff --git a/include/asm-i386/pgtable-3level-defs.h b/include/asm-i386/pgtable-3level-defs.h
new file mode 100644
index 000000000000..eb3a1ea88671
--- /dev/null
+++ b/include/asm-i386/pgtable-3level-defs.h
@@ -0,0 +1,22 @@
+#ifndef _I386_PGTABLE_3LEVEL_DEFS_H
+#define _I386_PGTABLE_3LEVEL_DEFS_H
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	30
+#define PTRS_PER_PGD	4
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#endif /* _I386_PGTABLE_3LEVEL_DEFS_H */
diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h
new file mode 100644
index 000000000000..d609f9c2c1f0
--- /dev/null
+++ b/include/asm-i386/pgtable-3level.h
@@ -0,0 +1,160 @@
+#ifndef _I386_PGTABLE_3LEVEL_H
+#define _I386_PGTABLE_3LEVEL_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Intel Physical Address Extension (PAE) Mode - three-level page
+ * tables on PPro+ CPUs.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
+
+#define pud_none(pud)				0
+#define pud_bad(pud)				0
+#define pud_present(pud)			1
+
+/*
+ * Is the pte executable?
+ */
+static inline int pte_x(pte_t pte)
+{
+	return !(pte_val(pte) & _PAGE_NX);
+}
+
+/*
+ * All present user-pages with !NX bit are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+	return pte_user(pte) && pte_x(pte);
+}
+/*
+ * All present pages with !NX bit are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+	return pte_x(pte);
+}
+
+/* Rules for using set_pte: the pte being assigned *must* be
+ * either not present or in a state where the hardware will
+ * not attempt to update the pte.  In places where this is
+ * not possible, use pte_get_and_clear to obtain the old pte
+ * value and then use set_pte to update it.  -ben
+ */
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define __HAVE_ARCH_SET_PTE_ATOMIC
+#define set_pte_atomic(pteptr,pteval) \
+		set_64bit((unsigned long long *)(pteptr),pte_val(pteval))
+#define set_pmd(pmdptr,pmdval) \
+		set_64bit((unsigned long long *)(pmdptr),pmd_val(pmdval))
+#define set_pud(pudptr,pudval) \
+		set_64bit((unsigned long long *)(pudptr),pud_val(pudval))
+
+/*
+ * Pentium-II erratum A13: in PAE mode we explicitly have to flush
+ * the TLB via cr3 if the top-level pgd is changed...
+ * We do not let the generic code free and clear pgd entries due to
+ * this erratum.
+ */
+static inline void pud_clear (pud_t * pud) { }
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pmd_page_kernel(pmd) \
+((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pud_page(pud) \
+((struct page *) __va(pud_val(pud) & PAGE_MASK))
+
+#define pud_page_kernel(pud) \
+((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
+			pmd_index(address))
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t res;
+
+	/* xchg acts as a barrier before the setting of the high bits */
+	res.pte_low = xchg(&ptep->pte_low, 0);
+	res.pte_high = ptep->pte_high;
+	ptep->pte_high = 0;
+
+	return res;
+}
+
+static inline int pte_same(pte_t a, pte_t b)
+{
+	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
+}
+
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte.pte_low && !pte.pte_high;
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return (pte.pte_low >> PAGE_SHIFT) |
+		(pte.pte_high << (32 - PAGE_SHIFT));
+}
+
+extern unsigned long long __supported_pte_mask;
+
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+
+	pte.pte_high = (page_nr >> (32 - PAGE_SHIFT)) | \
+					(pgprot_val(pgprot) >> 32);
+	pte.pte_high &= (__supported_pte_mask >> 32);
+	pte.pte_low = ((page_nr << PAGE_SHIFT) | pgprot_val(pgprot)) & \
+							__supported_pte_mask;
+	return pte;
+}
+
+static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pmd((((unsigned long long)page_nr << PAGE_SHIFT) | \
+			pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+/*
+ * Bits 0, 6 and 7 are taken in the low part of the pte,
+ * put the 32 bits of offset into the high part.
+ */
+#define pte_to_pgoff(pte) ((pte).pte_high)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
+#define PTE_FILE_MAX_BITS       32
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val) & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
+
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+
+#endif /* _I386_PGTABLE_3LEVEL_H */
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
new file mode 100644
index 000000000000..488c2b4befa5
--- /dev/null
+++ b/include/asm-i386/pgtable.h
@@ -0,0 +1,422 @@
+#ifndef _I386_PGTABLE_H
+#define _I386_PGTABLE_H
+
+#include <linux/config.h>
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <linux/threads.h>
+
+#ifndef _I386_BITOPS_H
+#include <asm/bitops.h>
+#endif
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern pgd_t swapper_pg_dir[1024];
+extern kmem_cache_t *pgd_cache;
+extern kmem_cache_t *pmd_cache;
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+void pmd_ctor(void *, kmem_cache_t *, unsigned long);
+void pgd_ctor(void *, kmem_cache_t *, unsigned long);
+void pgd_dtor(void *, kmem_cache_t *, unsigned long);
+void pgtable_cache_init(void);
+void paging_init(void);
+
+/*
+ * The Linux x86 paging architecture is 'compile-time dual-mode', it
+ * implements both the traditional 2-level x86 page tables and the
+ * newer 3-level PAE-mode page tables.
+ */
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level-defs.h>
+# define PMD_SIZE	(1UL << PMD_SHIFT)
+# define PMD_MASK	(~(PMD_SIZE-1))
+#else
+# include <asm/pgtable-2level-defs.h>
+#endif
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT	22
+#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS (1024-BOOT_USER_PGD_PTRS)
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	(8*1024*1024)
+#define VMALLOC_START	(((unsigned long) high_memory + vmalloc_earlyreserve + \
+			2*VMALLOC_OFFSET-1) & ~(VMALLOC_OFFSET-1))
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+/*
+ * The 4MB page is guessing..  Detailed in the infamous "Chapter H"
+ * of the Pentium details, but assuming intel did the straightforward
+ * thing, this bit set in the page directory entry just means that
+ * the page directory entry points directly to a 4MB-aligned block of
+ * memory. 
+ */
+#define _PAGE_BIT_PRESENT	0
+#define _PAGE_BIT_RW		1
+#define _PAGE_BIT_USER		2
+#define _PAGE_BIT_PWT		3
+#define _PAGE_BIT_PCD		4
+#define _PAGE_BIT_ACCESSED	5
+#define _PAGE_BIT_DIRTY		6
+#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page, Pentium+, if present.. */
+#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
+#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
+#define _PAGE_BIT_UNUSED2	10
+#define _PAGE_BIT_UNUSED3	11
+#define _PAGE_BIT_NX		63
+
+#define _PAGE_PRESENT	0x001
+#define _PAGE_RW	0x002
+#define _PAGE_USER	0x004
+#define _PAGE_PWT	0x008
+#define _PAGE_PCD	0x010
+#define _PAGE_ACCESSED	0x020
+#define _PAGE_DIRTY	0x040
+#define _PAGE_PSE	0x080	/* 4 MB (or 2MB) page, Pentium+, if present.. */
+#define _PAGE_GLOBAL	0x100	/* Global TLB entry PPro+ */
+#define _PAGE_UNUSED1	0x200	/* available for programmer */
+#define _PAGE_UNUSED2	0x400
+#define _PAGE_UNUSED3	0x800
+
+#define _PAGE_FILE	0x040	/* set:pagecache unset:swap */
+#define _PAGE_PROTNONE	0x080	/* If not present */
+#ifdef CONFIG_X86_PAE
+#define _PAGE_NX	(1ULL<<_PAGE_BIT_NX)
+#else
+#define _PAGE_NX	0
+#endif
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE \
+	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED \
+	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+
+#define PAGE_SHARED_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY \
+	PAGE_COPY_NOEXEC
+#define PAGE_READONLY \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+
+#define _PAGE_KERNEL \
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_NX)
+#define _PAGE_KERNEL_EXEC \
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+extern unsigned long long __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
+#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
+#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD)
+#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL		__pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO		__pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC	__pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE	__pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE	__pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC	__pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * The i386 can't do page protection for execute, and considers that
+ * the same are read. Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * Define this if things work differently on an i386 and an i486:
+ * it will (on an i486) warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+/* The boot page tables (all created as a single array) */
+extern unsigned long pg0[];
+
+#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)		{ return (pte).pte_low & _PAGE_USER; }
+static inline int pte_read(pte_t pte)		{ return (pte).pte_low & _PAGE_USER; }
+static inline int pte_dirty(pte_t pte)		{ return (pte).pte_low & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return (pte).pte_low & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)		{ return (pte).pte_low & _PAGE_RW; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)		{ return (pte).pte_low & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)	{ (pte).pte_low &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_exprotect(pte_t pte)	{ (pte).pte_low &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ (pte).pte_low &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ (pte).pte_low &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ (pte).pte_low &= ~_PAGE_RW; return pte; }
+static inline pte_t pte_mkread(pte_t pte)	{ (pte).pte_low |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ (pte).pte_low |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ (pte).pte_low |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ (pte).pte_low |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ (pte).pte_low |= _PAGE_RW; return pte; }
+
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level.h>
+#else
+# include <asm/pgtable-2level.h>
+#endif
+
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte_low);
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte_low);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	clear_bit(_PAGE_BIT_RW, &ptep->pte_low);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".  On processors which do not support
+ * it, this is a no-op.
+ */
+#define pgprot_noncached(prot)	((boot_cpu_data.x86 > 3)					  \
+				 ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT)) : (prot))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+#ifdef CONFIG_X86_PAE
+	/*
+	 * Chop off the NX bit (if present), and add the NX portion of
+	 * the newprot (if present):
+	 */
+	pte.pte_high &= ~(1 << (_PAGE_BIT_NX - 32));
+	pte.pte_high |= (pgprot_val(newprot) >> 32) & \
+					(__supported_pte_mask >> 32);
+#endif
+	return pte;
+}
+
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+#define pmd_large(pmd) \
+((pmd_val(pmd) & (_PAGE_PSE|_PAGE_PRESENT)) == (_PAGE_PSE|_PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_index_k(addr) pgd_index(addr)
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+		(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+		(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+
+/*
+ * Helper function that returns the kernel pagetable entry controlling
+ * the virtual address 'address'. NULL means no pagetable entry present.
+ * NOTE: the return type is pte_t but if the pmd is PSE then we return it
+ * as a pte too.
+ */
+extern pte_t *lookup_address(unsigned long address);
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+#ifdef CONFIG_X86_PAE
+ extern int set_kernel_exec(unsigned long vaddr, int enable);
+#else
+ static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;}
+#endif
+
+extern void noexec_setup(const char *str);
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address) \
+	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
+#define pte_offset_map_nested(dir, address) \
+	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+#else
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/*
+ * The i386 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ *
+ * Also, we only update the dirty/accessed state if we set
+ * the dirty bit by hand in the kernel, since the hardware
+ * will do the accessed bit for us, and we don't want to
+ * race with other CPU's that might be updating the dirty
+ * bit at the same time.
+ */
+#define update_mmu_cache(vma,address,pte) do { } while (0)
+#define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+	do {								  \
+		if (__dirty) {						  \
+			(__ptep)->pte_low = (__entry).pte_low;	  	  \
+			flush_tlb_page(__vma, __address);		  \
+		}							  \
+	} while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef CONFIG_DISCONTIGMEM
+#define kern_addr_valid(addr)	(1)
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* _I386_PGTABLE_H */
diff --git a/include/asm-i386/poll.h b/include/asm-i386/poll.h
new file mode 100644
index 000000000000..aecc80a15d36
--- /dev/null
+++ b/include/asm-i386/poll.h
@@ -0,0 +1,26 @@
+#ifndef __i386_POLL_H
+#define __i386_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-i386/posix_types.h b/include/asm-i386/posix_types.h
new file mode 100644
index 000000000000..4e47ed059ad6
--- /dev/null
+++ b/include/asm-i386/posix_types.h
@@ -0,0 +1,82 @@
+#ifndef __ARCH_I386_POSIX_TYPES_H
+#define __ARCH_I386_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd,fdsetp) \
+		__asm__ __volatile__("btsl %1,%0": \
+			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd,fdsetp) \
+		__asm__ __volatile__("btrl %1,%0": \
+			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
+		unsigned char __result; \
+		__asm__ __volatile__("btl %1,%2 ; setb %0" \
+			:"=q" (__result) :"r" ((int) (fd)), \
+			"m" (*(__kernel_fd_set *) (fdsetp))); \
+		__result; }))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+do { \
+	int __d0, __d1; \
+	__asm__ __volatile__("cld ; rep ; stosl" \
+			:"=m" (*(__kernel_fd_set *) (fdsetp)), \
+			  "=&c" (__d0), "=&D" (__d1) \
+			:"a" (0), "1" (__FDSET_LONGS), \
+			"2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
+} while (0)
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h
new file mode 100644
index 000000000000..be258b0e5a5f
--- /dev/null
+++ b/include/asm-i386/processor.h
@@ -0,0 +1,682 @@
+/*
+ * include/asm-i386/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+#ifndef __ASM_I386_PROCESSOR_H
+#define __ASM_I386_PROCESSOR_H
+
+#include <asm/vm86.h>
+#include <asm/math_emu.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/sigcontext.h>
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
+#include <asm/system.h>
+#include <linux/cache.h>
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/percpu.h>
+
+/* flag for disabling the tsc */
+extern int tsc_disable;
+
+struct desc_struct {
+	unsigned long a,b;
+};
+
+#define desc_empty(desc) \
+		(!((desc)->a + (desc)->b))
+
+#define desc_equal(desc1, desc2) \
+		(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct cpuinfo_x86 {
+	__u8	x86;		/* CPU family */
+	__u8	x86_vendor;	/* CPU vendor */
+	__u8	x86_model;
+	__u8	x86_mask;
+	char	wp_works_ok;	/* It doesn't on 386's */
+	char	hlt_works_ok;	/* Problems on some 486Dx4's and old 386's */
+	char	hard_math;
+	char	rfu;
+       	int	cpuid_level;	/* Maximum supported CPUID level, -1=no CPUID */
+	unsigned long	x86_capability[NCAPINTS];
+	char	x86_vendor_id[16];
+	char	x86_model_id[64];
+	int 	x86_cache_size;  /* in KB - valid for CPUS which support this
+				    call  */
+	int 	x86_cache_alignment;	/* In bytes */
+	int	fdiv_bug;
+	int	f00f_bug;
+	int	coma_bug;
+	unsigned long loops_per_jiffy;
+	unsigned char x86_num_cores;
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+#define X86_VENDOR_INTEL 0
+#define X86_VENDOR_CYRIX 1
+#define X86_VENDOR_AMD 2
+#define X86_VENDOR_UMC 3
+#define X86_VENDOR_NEXGEN 4
+#define X86_VENDOR_CENTAUR 5
+#define X86_VENDOR_RISE 6
+#define X86_VENDOR_TRANSMETA 7
+#define X86_VENDOR_NSC 8
+#define X86_VENDOR_NUM 9
+#define X86_VENDOR_UNKNOWN 0xff
+
+/*
+ * capabilities of CPUs
+ */
+
+extern struct cpuinfo_x86 boot_cpu_data;
+extern struct cpuinfo_x86 new_cpu_data;
+extern struct tss_struct doublefault_tss;
+DECLARE_PER_CPU(struct tss_struct, init_tss);
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_x86 cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+extern	int phys_proc_id[NR_CPUS];
+extern char ignore_fpu_irq;
+
+extern void identify_cpu(struct cpuinfo_x86 *);
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+
+#ifdef CONFIG_X86_HT
+extern void detect_ht(struct cpuinfo_x86 *c);
+#else
+static inline void detect_ht(struct cpuinfo_x86 *c) {}
+#endif
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
+
+/*
+ * Generic CPUID function
+ * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
+ * resulting in stale register contents being returned.
+ */
+static inline void cpuid(unsigned int op, unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx)
+{
+	__asm__("cpuid"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (op), "c"(0));
+}
+
+/* Some CPUID calls want 'count' to be placed in ecx */
+static inline void cpuid_count(int op, int count, int *eax, int *ebx, int *ecx,
+	       	int *edx)
+{
+	__asm__("cpuid"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (op), "c" (count));
+}
+
+/*
+ * CPUID functions returning a single datum
+ */
+static inline unsigned int cpuid_eax(unsigned int op)
+{
+	unsigned int eax;
+
+	__asm__("cpuid"
+		: "=a" (eax)
+		: "0" (op)
+		: "bx", "cx", "dx");
+	return eax;
+}
+static inline unsigned int cpuid_ebx(unsigned int op)
+{
+	unsigned int eax, ebx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=b" (ebx)
+		: "0" (op)
+		: "cx", "dx" );
+	return ebx;
+}
+static inline unsigned int cpuid_ecx(unsigned int op)
+{
+	unsigned int eax, ecx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=c" (ecx)
+		: "0" (op)
+		: "bx", "dx" );
+	return ecx;
+}
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+	unsigned int eax, edx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=d" (edx)
+		: "0" (op)
+		: "bx", "cx");
+	return edx;
+}
+
+#define load_cr3(pgdir) \
+	asm volatile("movl %0,%%cr3": :"r" (__pa(pgdir)))
+
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME		0x0001	/* enable vm86 extensions */
+#define X86_CR4_PVI		0x0002	/* virtual interrupts flag enable */
+#define X86_CR4_TSD		0x0004	/* disable time stamp at ipl 3 */
+#define X86_CR4_DE		0x0008	/* enable debugging extensions */
+#define X86_CR4_PSE		0x0010	/* enable page size extensions */
+#define X86_CR4_PAE		0x0020	/* enable physical address extensions */
+#define X86_CR4_MCE		0x0040	/* Machine check enable */
+#define X86_CR4_PGE		0x0080	/* enable global pages */
+#define X86_CR4_PCE		0x0100	/* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR		0x0200	/* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT	0x0400	/* enable unmasked SSE exceptions */
+
+/*
+ * Save the cr4 feature set we're using (ie
+ * Pentium 4MB enable and PPro Global page
+ * enable), so that any CPU's that boot up
+ * after us can get the correct flags.
+ */
+extern unsigned long mmu_cr4_features;
+
+static inline void set_in_cr4 (unsigned long mask)
+{
+	mmu_cr4_features |= mask;
+	__asm__("movl %%cr4,%%eax\n\t"
+		"orl %0,%%eax\n\t"
+		"movl %%eax,%%cr4\n"
+		: : "irg" (mask)
+		:"ax");
+}
+
+static inline void clear_in_cr4 (unsigned long mask)
+{
+	mmu_cr4_features &= ~mask;
+	__asm__("movl %%cr4,%%eax\n\t"
+		"andl %0,%%eax\n\t"
+		"movl %%eax,%%cr4\n"
+		: : "irg" (~mask)
+		:"ax");
+}
+
+/*
+ *      NSC/Cyrix CPU configuration register indexes
+ */
+
+#define CX86_PCR0 0x20
+#define CX86_GCR  0xb8
+#define CX86_CCR0 0xc0
+#define CX86_CCR1 0xc1
+#define CX86_CCR2 0xc2
+#define CX86_CCR3 0xc3
+#define CX86_CCR4 0xe8
+#define CX86_CCR5 0xe9
+#define CX86_CCR6 0xea
+#define CX86_CCR7 0xeb
+#define CX86_PCR1 0xf0
+#define CX86_DIR0 0xfe
+#define CX86_DIR1 0xff
+#define CX86_ARR_BASE 0xc4
+#define CX86_RCR_BASE 0xdc
+
+/*
+ *      NSC/Cyrix CPU indexed register access macros
+ */
+
+#define getCx86(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86(reg, data) do { \
+	outb((reg), 0x22); \
+	outb((data), 0x23); \
+} while (0)
+
+static inline void __monitor(const void *eax, unsigned long ecx,
+		unsigned long edx)
+{
+	/* "monitor %eax,%ecx,%edx;" */
+	asm volatile(
+		".byte 0x0f,0x01,0xc8;"
+		: :"a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+	/* "mwait %eax,%ecx;" */
+	asm volatile(
+		".byte 0x0f,0x01,0xc9;"
+		: :"a" (eax), "c" (ecx));
+}
+
+/* from system description table in BIOS.  Mostly for MCA use, but
+others may find it useful. */
+extern unsigned int machine_id;
+extern unsigned int machine_submodel_id;
+extern unsigned int BIOS_revision;
+extern unsigned int mca_pentium_flag;
+
+/* Boot loader type from the setup header */
+extern int bootloader_type;
+
+/*
+ * User space process size: 3GB (default).
+ */
+#define TASK_SIZE	(PAGE_OFFSET)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+/*
+ * Size of io_bitmap.
+ */
+#define IO_BITMAP_BITS  65536
+#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
+#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_OFFSET offsetof(struct tss_struct,io_bitmap)
+#define INVALID_IO_BITMAP_OFFSET 0x8000
+#define INVALID_IO_BITMAP_OFFSET_LAZY 0x9000
+
+struct i387_fsave_struct {
+	long	cwd;
+	long	swd;
+	long	twd;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
+	long	status;		/* software status information */
+};
+
+struct i387_fxsave_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;
+	unsigned short	fop;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	mxcsr;
+	long	mxcsr_mask;
+	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	long	padding[56];
+} __attribute__ ((aligned (16)));
+
+struct i387_soft_struct {
+	long	cwd;
+	long	swd;
+	long	twd;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
+	unsigned char	ftop, changed, lookahead, no_update, rm, alimit;
+	struct info	*info;
+	unsigned long	entry_eip;
+};
+
+union i387_union {
+	struct i387_fsave_struct	fsave;
+	struct i387_fxsave_struct	fxsave;
+	struct i387_soft_struct soft;
+};
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct;
+
+struct tss_struct {
+	unsigned short	back_link,__blh;
+	unsigned long	esp0;
+	unsigned short	ss0,__ss0h;
+	unsigned long	esp1;
+	unsigned short	ss1,__ss1h;	/* ss1 is used to cache MSR_IA32_SYSENTER_CS */
+	unsigned long	esp2;
+	unsigned short	ss2,__ss2h;
+	unsigned long	__cr3;
+	unsigned long	eip;
+	unsigned long	eflags;
+	unsigned long	eax,ecx,edx,ebx;
+	unsigned long	esp;
+	unsigned long	ebp;
+	unsigned long	esi;
+	unsigned long	edi;
+	unsigned short	es, __esh;
+	unsigned short	cs, __csh;
+	unsigned short	ss, __ssh;
+	unsigned short	ds, __dsh;
+	unsigned short	fs, __fsh;
+	unsigned short	gs, __gsh;
+	unsigned short	ldt, __ldth;
+	unsigned short	trace, io_bitmap_base;
+	/*
+	 * The extra 1 is there because the CPU will access an
+	 * additional byte beyond the end of the IO permission
+	 * bitmap. The extra byte must be all 1 bits, and must
+	 * be within the limit.
+	 */
+	unsigned long	io_bitmap[IO_BITMAP_LONGS + 1];
+	/*
+	 * Cache the current maximum and the last task that used the bitmap:
+	 */
+	unsigned long io_bitmap_max;
+	struct thread_struct *io_bitmap_owner;
+	/*
+	 * pads the TSS to be cacheline-aligned (size is 0x100)
+	 */
+	unsigned long __cacheline_filler[35];
+	/*
+	 * .. and then another 0x100 bytes for emergency kernel stack
+	 */
+	unsigned long stack[64];
+} __attribute__((packed));
+
+#define ARCH_MIN_TASKALIGN	16
+
+struct thread_struct {
+/* cached TLS descriptors. */
+	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+	unsigned long	esp0;
+	unsigned long	sysenter_cs;
+	unsigned long	eip;
+	unsigned long	esp;
+	unsigned long	fs;
+	unsigned long	gs;
+/* Hardware debugging registers */
+	unsigned long	debugreg[8];  /* %%db0-7 debug registers */
+/* fault info */
+	unsigned long	cr2, trap_no, error_code;
+/* floating point info */
+	union i387_union	i387;
+/* virtual 86 mode info */
+	struct vm86_struct __user * vm86_info;
+	unsigned long		screen_bitmap;
+	unsigned long		v86flags, v86mask, saved_esp0;
+	unsigned int		saved_fs, saved_gs;
+/* IO permissions */
+	unsigned long	*io_bitmap_ptr;
+/* max allowed port in the bitmap, in bytes: */
+	unsigned long	io_bitmap_max;
+};
+
+#define INIT_THREAD  {							\
+	.vm86_info = NULL,						\
+	.sysenter_cs = __KERNEL_CS,					\
+	.io_bitmap_ptr = NULL,						\
+}
+
+/*
+ * Note that the .io_bitmap member must be extra-big. This is because
+ * the CPU will access an additional byte beyond the end of the IO
+ * permission bitmap. The extra byte must be all 1 bits, and must
+ * be within the limit.
+ */
+#define INIT_TSS  {							\
+	.esp0		= sizeof(init_stack) + (long)&init_stack,	\
+	.ss0		= __KERNEL_DS,					\
+	.ss1		= __KERNEL_CS,					\
+	.ldt		= GDT_ENTRY_LDT,				\
+	.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,			\
+	.io_bitmap	= { [ 0 ... IO_BITMAP_LONGS] = ~0 },		\
+}
+
+static inline void load_esp0(struct tss_struct *tss, struct thread_struct *thread)
+{
+	tss->esp0 = thread->esp0;
+	/* This can only happen when SEP is enabled, no need to test "SEP"arately */
+	if (unlikely(tss->ss1 != thread->sysenter_cs)) {
+		tss->ss1 = thread->sysenter_cs;
+		wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
+	}
+}
+
+#define start_thread(regs, new_eip, new_esp) do {		\
+	__asm__("movl %0,%%fs ; movl %0,%%gs": :"r" (0));	\
+	set_fs(USER_DS);					\
+	regs->xds = __USER_DS;					\
+	regs->xes = __USER_DS;					\
+	regs->xss = __USER_DS;					\
+	regs->xcs = __USER_CS;					\
+	regs->eip = new_eip;					\
+	regs->esp = new_esp;					\
+} while (0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+void show_trace(struct task_struct *task, unsigned long *stack);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define THREAD_SIZE_LONGS      (THREAD_SIZE/sizeof(unsigned long))
+#define KSTK_TOP(info)                                                 \
+({                                                                     \
+       unsigned long *__ptr = (unsigned long *)(info);                 \
+       (unsigned long)(&__ptr[THREAD_SIZE_LONGS]);                     \
+})
+
+#define task_pt_regs(task)                                             \
+({                                                                     \
+       struct pt_regs *__regs__;                                       \
+       __regs__ = (struct pt_regs *)KSTK_TOP((task)->thread_info);     \
+       __regs__ - 1;                                                   \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->eip)
+#define KSTK_ESP(task) (task_pt_regs(task)->esp)
+
+
+struct microcode_header {
+	unsigned int hdrver;
+	unsigned int rev;
+	unsigned int date;
+	unsigned int sig;
+	unsigned int cksum;
+	unsigned int ldrver;
+	unsigned int pf;
+	unsigned int datasize;
+	unsigned int totalsize;
+	unsigned int reserved[3];
+};
+
+struct microcode {
+	struct microcode_header hdr;
+	unsigned int bits[0];
+};
+
+typedef struct microcode microcode_t;
+typedef struct microcode_header microcode_header_t;
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int cksum;
+};
+
+struct extended_sigtable {
+	unsigned int count;
+	unsigned int cksum;
+	unsigned int reserved[3];
+	struct extended_signature sigs[0];
+};
+/* '6' because it used to be for P6 only (but now covers Pentium 4 as well) */
+#define MICROCODE_IOCFREE	_IO('6',0)
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()	rep_nop()
+
+/* generic versions from gas */
+#define GENERIC_NOP1	".byte 0x90\n"
+#define GENERIC_NOP2    	".byte 0x89,0xf6\n"
+#define GENERIC_NOP3        ".byte 0x8d,0x76,0x00\n"
+#define GENERIC_NOP4        ".byte 0x8d,0x74,0x26,0x00\n"
+#define GENERIC_NOP5        GENERIC_NOP1 GENERIC_NOP4
+#define GENERIC_NOP6	".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP7	".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP8	GENERIC_NOP1 GENERIC_NOP7
+
+/* Opteron nops */
+#define K8_NOP1 GENERIC_NOP1
+#define K8_NOP2	".byte 0x66,0x90\n" 
+#define K8_NOP3	".byte 0x66,0x66,0x90\n" 
+#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n" 
+#define K8_NOP5	K8_NOP3 K8_NOP2 
+#define K8_NOP6	K8_NOP3 K8_NOP3
+#define K8_NOP7	K8_NOP4 K8_NOP3
+#define K8_NOP8	K8_NOP4 K8_NOP4
+
+/* K7 nops */
+/* uses eax dependencies (arbitary choice) */
+#define K7_NOP1  GENERIC_NOP1
+#define K7_NOP2	".byte 0x8b,0xc0\n" 
+#define K7_NOP3	".byte 0x8d,0x04,0x20\n"
+#define K7_NOP4	".byte 0x8d,0x44,0x20,0x00\n"
+#define K7_NOP5	K7_NOP4 ASM_NOP1
+#define K7_NOP6	".byte 0x8d,0x80,0,0,0,0\n"
+#define K7_NOP7        ".byte 0x8D,0x04,0x05,0,0,0,0\n"
+#define K7_NOP8        K7_NOP7 ASM_NOP1
+
+#ifdef CONFIG_MK8
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
+#elif defined(CONFIG_MK7)
+#define ASM_NOP1 K7_NOP1
+#define ASM_NOP2 K7_NOP2
+#define ASM_NOP3 K7_NOP3
+#define ASM_NOP4 K7_NOP4
+#define ASM_NOP5 K7_NOP5
+#define ASM_NOP6 K7_NOP6
+#define ASM_NOP7 K7_NOP7
+#define ASM_NOP8 K7_NOP8
+#else
+#define ASM_NOP1 GENERIC_NOP1
+#define ASM_NOP2 GENERIC_NOP2
+#define ASM_NOP3 GENERIC_NOP3
+#define ASM_NOP4 GENERIC_NOP4
+#define ASM_NOP5 GENERIC_NOP5
+#define ASM_NOP6 GENERIC_NOP6
+#define ASM_NOP7 GENERIC_NOP7
+#define ASM_NOP8 GENERIC_NOP8
+#endif
+
+#define ASM_NOP_MAX 8
+
+/* Prefetch instructions for Pentium III and AMD Athlon */
+/* It's not worth to care about 3dnow! prefetches for the K6
+   because they are microcoded there and very slow.
+   However we don't do prefetches for pre XP Athlons currently
+   That should be fixed. */
+#define ARCH_HAS_PREFETCH
+extern inline void prefetch(const void *x)
+{
+	alternative_input(ASM_NOP4,
+			  "prefetchnta (%1)",
+			  X86_FEATURE_XMM,
+			  "r" (x));
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+/* 3dnow! prefetch to get an exclusive cache line. Useful for 
+   spinlocks to avoid one state transition in the cache coherency protocol. */
+extern inline void prefetchw(const void *x)
+{
+	alternative_input(ASM_NOP4,
+			  "prefetchw (%1)",
+			  X86_FEATURE_3DNOW,
+			  "r" (x));
+}
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern void select_idle_routine(const struct cpuinfo_x86 *c);
+
+#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
+
+extern unsigned long boot_option_idle_override;
+
+#endif /* __ASM_I386_PROCESSOR_H */
diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h
new file mode 100644
index 000000000000..8618914b3521
--- /dev/null
+++ b/include/asm-i386/ptrace.h
@@ -0,0 +1,69 @@
+#ifndef _I386_PTRACE_H
+#define _I386_PTRACE_H
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS  13
+#define EFL 14
+#define UESP 15
+#define SS   16
+#define FRAME_SIZE 17
+
+/* this struct defines the way the registers are stored on the 
+   stack during a system call. */
+
+struct pt_regs {
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	int  xds;
+	int  xes;
+	long orig_eax;
+	long eip;
+	int  xcs;
+	long eflags;
+	long esp;
+	int  xss;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETFPXREGS         18
+#define PTRACE_SETFPXREGS         19
+
+#define PTRACE_OLDSETOPTIONS         21
+
+#define PTRACE_GET_THREAD_AREA    25
+#define PTRACE_SET_THREAD_AREA    26
+
+#ifdef __KERNEL__
+struct task_struct;
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code);
+#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs))
+#define instruction_pointer(regs) ((regs)->eip)
+#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+#endif
+
+#endif
diff --git a/include/asm-i386/resource.h b/include/asm-i386/resource.h
new file mode 100644
index 000000000000..6c1ea37c7718
--- /dev/null
+++ b/include/asm-i386/resource.h
@@ -0,0 +1,6 @@
+#ifndef _I386_RESOURCE_H
+#define _I386_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-i386/rtc.h b/include/asm-i386/rtc.h
new file mode 100644
index 000000000000..ffd02109a0e5
--- /dev/null
+++ b/include/asm-i386/rtc.h
@@ -0,0 +1,10 @@
+#ifndef _I386_RTC_H
+#define _I386_RTC_H
+
+/*
+ * x86 uses the default access methods for the RTC.
+ */
+
+#include <asm-generic/rtc.h>
+
+#endif
diff --git a/include/asm-i386/rwlock.h b/include/asm-i386/rwlock.h
new file mode 100644
index 000000000000..b57cc7afdf7e
--- /dev/null
+++ b/include/asm-i386/rwlock.h
@@ -0,0 +1,71 @@
+/* include/asm-i386/rwlock.h
+ *
+ *	Helpers used by both rw spinlocks and rw semaphores.
+ *
+ *	Based in part on code from semaphore.h and
+ *	spinlock.h Copyright 1996 Linus Torvalds.
+ *
+ *	Copyright 1999 Red Hat, Inc.
+ *
+ *	Written by Benjamin LaHaise.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_I386_RWLOCK_H
+#define _ASM_I386_RWLOCK_H
+
+#define RW_LOCK_BIAS		 0x01000000
+#define RW_LOCK_BIAS_STR	"0x01000000"
+
+#define __build_read_lock_ptr(rw, helper)   \
+	asm volatile(LOCK "subl $1,(%0)\n\t" \
+		     "jns 1f\n" \
+		     "call " helper "\n\t" \
+		     "1:\n" \
+		     ::"a" (rw) : "memory")
+
+#define __build_read_lock_const(rw, helper)   \
+	asm volatile(LOCK "subl $1,%0\n\t" \
+		     "jns 1f\n" \
+		     "pushl %%eax\n\t" \
+		     "leal %0,%%eax\n\t" \
+		     "call " helper "\n\t" \
+		     "popl %%eax\n\t" \
+		     "1:\n" \
+		     :"=m" (*(volatile int *)rw) : : "memory")
+
+#define __build_read_lock(rw, helper)	do { \
+						if (__builtin_constant_p(rw)) \
+							__build_read_lock_const(rw, helper); \
+						else \
+							__build_read_lock_ptr(rw, helper); \
+					} while (0)
+
+#define __build_write_lock_ptr(rw, helper) \
+	asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+		     "jz 1f\n" \
+		     "call " helper "\n\t" \
+		     "1:\n" \
+		     ::"a" (rw) : "memory")
+
+#define __build_write_lock_const(rw, helper) \
+	asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
+		     "jz 1f\n" \
+		     "pushl %%eax\n\t" \
+		     "leal %0,%%eax\n\t" \
+		     "call " helper "\n\t" \
+		     "popl %%eax\n\t" \
+		     "1:\n" \
+		     :"=m" (*(volatile int *)rw) : : "memory")
+
+#define __build_write_lock(rw, helper)	do { \
+						if (__builtin_constant_p(rw)) \
+							__build_write_lock_const(rw, helper); \
+						else \
+							__build_write_lock_ptr(rw, helper); \
+					} while (0)
+
+#endif
diff --git a/include/asm-i386/rwsem.h b/include/asm-i386/rwsem.h
new file mode 100644
index 000000000000..7625a675852f
--- /dev/null
+++ b/include/asm-i386/rwsem.h
@@ -0,0 +1,288 @@
+/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ *
+ * Derived from asm-i386/semaphore.h
+ *
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _I386_RWSEM_H
+#define _I386_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *FASTCALL(rwsem_down_read_failed(struct rw_semaphore *sem));
+extern struct rw_semaphore *FASTCALL(rwsem_down_write_failed(struct rw_semaphore *sem));
+extern struct rw_semaphore *FASTCALL(rwsem_wake(struct rw_semaphore *));
+extern struct rw_semaphore *FASTCALL(rwsem_downgrade_wake(struct rw_semaphore *sem));
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+	__RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+		"# beginning down_read\n\t"
+LOCK_PREFIX	"  incl      (%%eax)\n\t" /* adds 0x00000001, returns the old value */
+		"  js        2f\n\t" /* jump if we weren't granted the lock */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  pushl     %%ecx\n\t"
+		"  pushl     %%edx\n\t"
+		"  call      rwsem_down_read_failed\n\t"
+		"  popl      %%edx\n\t"
+		"  popl      %%ecx\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending down_read\n\t"
+		: "=m"(sem->count)
+		: "a"(sem), "m"(sem->count)
+		: "memory", "cc");
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	__s32 result, tmp;
+	__asm__ __volatile__(
+		"# beginning __down_read_trylock\n\t"
+		"  movl      %0,%1\n\t"
+		"1:\n\t"
+		"  movl	     %1,%2\n\t"
+		"  addl      %3,%2\n\t"
+		"  jle	     2f\n\t"
+LOCK_PREFIX	"  cmpxchgl  %2,%0\n\t"
+		"  jnz	     1b\n\t"
+		"2:\n\t"
+		"# ending __down_read_trylock\n\t"
+		: "+m"(sem->count), "=&a"(result), "=&r"(tmp)
+		: "i"(RWSEM_ACTIVE_READ_BIAS)
+		: "memory", "cc");
+	return result>=0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	__asm__ __volatile__(
+		"# beginning down_write\n\t"
+LOCK_PREFIX	"  xadd      %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns the old value */
+		"  testl     %%edx,%%edx\n\t" /* was the count 0 before? */
+		"  jnz       2f\n\t" /* jump if we weren't granted the lock */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  pushl     %%ecx\n\t"
+		"  call      rwsem_down_write_failed\n\t"
+		"  popl      %%ecx\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending down_write"
+		: "=m"(sem->count), "=d"(tmp)
+		: "a"(sem), "1"(tmp), "m"(sem->count)
+		: "memory", "cc");
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long ret = cmpxchg(&sem->count,
+				  RWSEM_UNLOCKED_VALUE, 
+				  RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+	__asm__ __volatile__(
+		"# beginning __up_read\n\t"
+LOCK_PREFIX	"  xadd      %%edx,(%%eax)\n\t" /* subtracts 1, returns the old value */
+		"  js        2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  decw      %%dx\n\t" /* do nothing if still outstanding active readers */
+		"  jnz       1b\n\t"
+		"  pushl     %%ecx\n\t"
+		"  call      rwsem_wake\n\t"
+		"  popl      %%ecx\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __up_read\n"
+		: "=m"(sem->count), "=d"(tmp)
+		: "a"(sem), "1"(tmp), "m"(sem->count)
+		: "memory", "cc");
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+		"# beginning __up_write\n\t"
+		"  movl      %2,%%edx\n\t"
+LOCK_PREFIX	"  xaddl     %%edx,(%%eax)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */
+		"  jnz       2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  decw      %%dx\n\t" /* did the active count reduce to 0? */
+		"  jnz       1b\n\t" /* jump back if not */
+		"  pushl     %%ecx\n\t"
+		"  call      rwsem_wake\n\t"
+		"  popl      %%ecx\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __up_write\n"
+		: "=m"(sem->count)
+		: "a"(sem), "i"(-RWSEM_ACTIVE_WRITE_BIAS), "m"(sem->count)
+		: "memory", "cc", "edx");
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+		"# beginning __downgrade_write\n\t"
+LOCK_PREFIX	"  addl      %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+		"  js        2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  pushl     %%ecx\n\t"
+		"  pushl     %%edx\n\t"
+		"  call      rwsem_downgrade_wake\n\t"
+		"  popl      %%edx\n\t"
+		"  popl      %%ecx\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __downgrade_write\n"
+		: "=m"(sem->count)
+		: "a"(sem), "i"(-RWSEM_WAITING_BIAS), "m"(sem->count)
+		: "memory", "cc");
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+LOCK_PREFIX	"addl %1,%0"
+		: "=m"(sem->count)
+		: "ir"(delta), "m"(sem->count));
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	int tmp = delta;
+
+	__asm__ __volatile__(
+LOCK_PREFIX	"xadd %0,(%2)"
+		: "+r"(tmp), "=m"(sem->count)
+		: "r"(sem), "m"(sem->count)
+		: "memory");
+
+	return tmp+delta;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _I386_RWSEM_H */
diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h
new file mode 100644
index 000000000000..55d6c953a76e
--- /dev/null
+++ b/include/asm-i386/scatterlist.h
@@ -0,0 +1,21 @@
+#ifndef _I386_SCATTERLIST_H
+#define _I386_SCATTERLIST_H
+
+struct scatterlist {
+    struct page		*page;
+    unsigned int	offset;
+    dma_addr_t		dma_address;
+    unsigned int	length;
+};
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#endif /* !(_I386_SCATTERLIST_H) */
diff --git a/include/asm-i386/seccomp.h b/include/asm-i386/seccomp.h
new file mode 100644
index 000000000000..18da19e89bff
--- /dev/null
+++ b/include/asm-i386/seccomp.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on i386"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/include/asm-i386/sections.h b/include/asm-i386/sections.h
new file mode 100644
index 000000000000..2dcbb92918b2
--- /dev/null
+++ b/include/asm-i386/sections.h
@@ -0,0 +1,7 @@
+#ifndef _I386_SECTIONS_H
+#define _I386_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-i386/segment.h b/include/asm-i386/segment.h
new file mode 100644
index 000000000000..bb5ff5b2c02e
--- /dev/null
+++ b/include/asm-i386/segment.h
@@ -0,0 +1,101 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/*
+ * The layout of the per-CPU GDT under Linux:
+ *
+ *   0 - null
+ *   1 - reserved
+ *   2 - reserved
+ *   3 - reserved
+ *
+ *   4 - unused			<==== new cacheline
+ *   5 - unused
+ *
+ *  ------- start of TLS (Thread-Local Storage) segments:
+ *
+ *   6 - TLS segment #1			[ glibc's TLS segment ]
+ *   7 - TLS segment #2			[ Wine's %fs Win32 segment ]
+ *   8 - TLS segment #3
+ *   9 - reserved
+ *  10 - reserved
+ *  11 - reserved
+ *
+ *  ------- start of kernel segments:
+ *
+ *  12 - kernel code segment		<==== new cacheline
+ *  13 - kernel data segment
+ *  14 - default user CS
+ *  15 - default user DS
+ *  16 - TSS
+ *  17 - LDT
+ *  18 - PNPBIOS support (16->32 gate)
+ *  19 - PNPBIOS support
+ *  20 - PNPBIOS support
+ *  21 - PNPBIOS support
+ *  22 - PNPBIOS support
+ *  23 - APM BIOS support
+ *  24 - APM BIOS support
+ *  25 - APM BIOS support 
+ *
+ *  26 - ESPFIX small SS
+ *  27 - unused
+ *  28 - unused
+ *  29 - unused
+ *  30 - unused
+ *  31 - TSS for double fault handler
+ */
+#define GDT_ENTRY_TLS_ENTRIES	3
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+#define GDT_ENTRY_DEFAULT_USER_CS	14
+#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3)
+
+#define GDT_ENTRY_DEFAULT_USER_DS	15
+#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3)
+
+#define GDT_ENTRY_KERNEL_BASE	12
+
+#define GDT_ENTRY_KERNEL_CS		(GDT_ENTRY_KERNEL_BASE + 0)
+#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
+
+#define GDT_ENTRY_KERNEL_DS		(GDT_ENTRY_KERNEL_BASE + 1)
+#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
+
+#define GDT_ENTRY_TSS			(GDT_ENTRY_KERNEL_BASE + 4)
+#define GDT_ENTRY_LDT			(GDT_ENTRY_KERNEL_BASE + 5)
+
+#define GDT_ENTRY_PNPBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 6)
+#define GDT_ENTRY_APMBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 11)
+
+#define GDT_ENTRY_ESPFIX_SS		(GDT_ENTRY_KERNEL_BASE + 14)
+#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
+
+#define GDT_ENTRY_DOUBLEFAULT_TSS	31
+
+/*
+ * The GDT has 32 entries
+ */
+#define GDT_ENTRIES 32
+
+#define GDT_SIZE (GDT_ENTRIES * 8)
+
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS		2
+#define __BOOT_CS	(GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS		(GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS	(GDT_ENTRY_BOOT_DS * 8)
+
+/*
+ * The interrupt descriptor table has room for 256 idt's,
+ * the global descriptor table is dependent on the number
+ * of tasks we can have..
+ */
+#define IDT_ENTRIES 256
+
+#endif
diff --git a/include/asm-i386/semaphore.h b/include/asm-i386/semaphore.h
new file mode 100644
index 000000000000..ea563da63e24
--- /dev/null
+++ b/include/asm-i386/semaphore.h
@@ -0,0 +1,194 @@
+#ifndef _I386_SEMAPHORE_H
+#define _I386_SEMAPHORE_H
+
+#include <linux/linkage.h>
+
+#ifdef __KERNEL__
+
+/*
+ * SMP- and interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * Modified 1996-12-23 by Dave Grothe <dave@gcom.com> to fix bugs in
+ *                     the original code and to make semaphore waits
+ *                     interruptible so that processes waiting on
+ *                     semaphores can be killed.
+ * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper
+ *		       functions in asm/sempahore-helper.h while fixing a
+ *		       potential and subtle race discovered by Ulrich Schmid
+ *		       in down_interruptible(). Since I started to play here I
+ *		       also implemented the `trylock' semaphore operation.
+ *          1999-07-02 Artur Skawina <skawina@geocities.com>
+ *                     Optimized "0(ecx)" -> "(ecx)" (the assembler does not
+ *                     do this). Changed calling sequences from push/jmp to
+ *                     traditional call/ret.
+ * Modified 2001-01-01 Andreas Franck <afranck@gmx.de>
+ *		       Some hacks to ensure compatibility with recent
+ *		       GCC snapshots, to avoid stack corruption when compiling
+ *		       with -fomit-frame-pointer. It's not sure if this will
+ *		       be fixed in GCC, as our previous implementation was a
+ *		       bit dubious.
+ *
+ * If you would like to see an analysis of this implementation, please
+ * ftp to gcom.com and download the file
+ * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz.
+ *
+ */
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+/*
+ *	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+ *
+ * i'd rather use the more flexible initialization above, but sadly
+ * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
+ */
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+fastcall void __down_failed(void /* special register calling convention */);
+fastcall int  __down_failed_interruptible(void  /* params in registers */);
+fastcall int  __down_failed_trylock(void  /* params in registers */);
+fastcall void __up_wakeup(void /* special register calling convention */);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down_failed" is a special asm handler that calls the C
+ * routine that actually waits. See arch/i386/kernel/semaphore.c
+ */
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	__asm__ __volatile__(
+		"# atomic down operation\n\t"
+		LOCK "decl %0\n\t"     /* --sem->count */
+		"js 2f\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tlea %0,%%eax\n\t"
+		"call __down_failed\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=m" (sem->count)
+		:
+		:"memory","ax");
+}
+
+/*
+ * Interruptible try to acquire a semaphore.  If we obtained
+ * it, return zero.  If we were interrupted, returns -EINTR
+ */
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int result;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"# atomic interruptible down operation\n\t"
+		LOCK "decl %1\n\t"     /* --sem->count */
+		"js 2f\n\t"
+		"xorl %0,%0\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tlea %1,%%eax\n\t"
+		"call __down_failed_interruptible\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=a" (result), "=m" (sem->count)
+		:
+		:"memory");
+	return result;
+}
+
+/*
+ * Non-blockingly attempt to down() a semaphore.
+ * Returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore * sem)
+{
+	int result;
+
+	__asm__ __volatile__(
+		"# atomic interruptible down operation\n\t"
+		LOCK "decl %1\n\t"     /* --sem->count */
+		"js 2f\n\t"
+		"xorl %0,%0\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tlea %1,%%eax\n\t"
+		"call __down_failed_trylock\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=a" (result), "=m" (sem->count)
+		:
+		:"memory");
+	return result;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	__asm__ __volatile__(
+		"# atomic up operation\n\t"
+		LOCK "incl %0\n\t"     /* ++sem->count */
+		"jle 2f\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tlea %0,%%eax\n\t"
+		"call __up_wakeup\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		".subsection 0\n"
+		:"=m" (sem->count)
+		:
+		:"memory","ax");
+}
+
+#endif
+#endif
diff --git a/include/asm-i386/sembuf.h b/include/asm-i386/sembuf.h
new file mode 100644
index 000000000000..323835166c14
--- /dev/null
+++ b/include/asm-i386/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _I386_SEMBUF_H
+#define _I386_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _I386_SEMBUF_H */
diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h
new file mode 100644
index 000000000000..21ddecc77c77
--- /dev/null
+++ b/include/asm-i386/serial.h
@@ -0,0 +1,130 @@
+/*
+ * include/asm-i386/serial.h
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#endif
+
+#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
+
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS		\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#ifdef CONFIG_MCA
+#define MCA_SERIAL_PORT_DFNS			\
+	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
+#else
+#define MCA_SERIAL_PORT_DFNS
+#endif
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS		\
+	HUB6_SERIAL_PORT_DFNS		\
+	MCA_SERIAL_PORT_DFNS
+
diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h
new file mode 100644
index 000000000000..8814b54c75d4
--- /dev/null
+++ b/include/asm-i386/setup.h
@@ -0,0 +1,66 @@
+/*
+ *	Just a place holder. We don't want to have to test x86 before
+ *	we include stuff
+ */
+
+#ifndef _i386_SETUP_H
+#define _i386_SETUP_H
+
+#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
+
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+#define MAX_NONPAE_PFN	(1 << 20)
+
+#define PARAM_SIZE 2048
+#define COMMAND_LINE_SIZE 256
+
+#define OLD_CL_MAGIC_ADDR	0x90020
+#define OLD_CL_MAGIC		0xA33F
+#define OLD_CL_BASE_ADDR	0x90000
+#define OLD_CL_OFFSET		0x90022
+#define NEW_CL_POINTER		0x228	/* Relative to real mode data */
+
+#ifndef __ASSEMBLY__
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+extern unsigned char boot_params[PARAM_SIZE];
+
+#define PARAM	(boot_params)
+#define SCREEN_INFO (*(struct screen_info *) (PARAM+0))
+#define EXT_MEM_K (*(unsigned short *) (PARAM+2))
+#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0))
+#define E820_MAP_NR (*(char*) (PARAM+E820NR))
+#define E820_MAP    ((struct e820entry *) (PARAM+E820MAP))
+#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
+#define IST_INFO   (*(struct ist_info *) (PARAM+0x60))
+#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
+#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
+#define EFI_SYSTAB ((efi_system_table_t *) *((unsigned long *)(PARAM+0x1c4)))
+#define EFI_MEMDESC_SIZE (*((unsigned long *) (PARAM+0x1c8)))
+#define EFI_MEMDESC_VERSION (*((unsigned long *) (PARAM+0x1cc)))
+#define EFI_MEMMAP ((efi_memory_desc_t *) *((unsigned long *)(PARAM+0x1d0)))
+#define EFI_MEMMAP_SIZE (*((unsigned long *) (PARAM+0x1d4)))
+#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))
+#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8))
+#define VIDEO_MODE (*(unsigned short *) (PARAM+0x1FA))
+#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC))
+#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF))
+#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210))
+#define KERNEL_START (*(unsigned long *) (PARAM+0x214))
+#define INITRD_START (*(unsigned long *) (PARAM+0x218))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
+#define EDID_INFO   (*(struct edid_info *) (PARAM+0x140))
+#define EDD_NR     (*(unsigned char *) (PARAM+EDDNR))
+#define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF))
+#define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF))
+#define EDD_BUF     ((struct edd_info *) (PARAM+EDDBUF))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _i386_SETUP_H */
diff --git a/include/asm-i386/shmbuf.h b/include/asm-i386/shmbuf.h
new file mode 100644
index 000000000000..d1cdc3cb079b
--- /dev/null
+++ b/include/asm-i386/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _I386_SHMBUF_H
+#define _I386_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _I386_SHMBUF_H */
diff --git a/include/asm-i386/shmparam.h b/include/asm-i386/shmparam.h
new file mode 100644
index 000000000000..786243a5b319
--- /dev/null
+++ b/include/asm-i386/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASMI386_SHMPARAM_H
+#define _ASMI386_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASMI386_SHMPARAM_H */
diff --git a/include/asm-i386/sigcontext.h b/include/asm-i386/sigcontext.h
new file mode 100644
index 000000000000..aaef089a7787
--- /dev/null
+++ b/include/asm-i386/sigcontext.h
@@ -0,0 +1,85 @@
+#ifndef _ASMi386_SIGCONTEXT_H
+#define _ASMi386_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+
+/*
+ * As documented in the iBCS2 standard..
+ *
+ * The first part of "struct _fpstate" is just the normal i387
+ * hardware setup, the extra "status" word is used to save the
+ * coprocessor status word before entering the handler.
+ *
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * The FPU state data structure has had to grow to accommodate the
+ * extended FPU state required by the Streaming SIMD Extensions.
+ * There is no documented standard to accomplish this at the moment.
+ */
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	unsigned long element[4];
+};
+
+struct _fpstate {
+	/* Regular FPU environment */
+	unsigned long 	cw;
+	unsigned long	sw;
+	unsigned long	tag;
+	unsigned long	ipoff;
+	unsigned long	cssel;
+	unsigned long	dataoff;
+	unsigned long	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	unsigned long	_fxsr_env[6];	/* FXSR FPU env is ignored */
+	unsigned long	mxcsr;
+	unsigned long	reserved;
+	struct _fpxreg	_fxsr_st[8];	/* FXSR FPU reg data is ignored */
+	struct _xmmreg	_xmm[8];
+	unsigned long	padding[56];
+};
+
+#define X86_FXSR_MAGIC		0x0000
+
+struct sigcontext {
+	unsigned short gs, __gsh;
+	unsigned short fs, __fsh;
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned long edi;
+	unsigned long esi;
+	unsigned long ebp;
+	unsigned long esp;
+	unsigned long ebx;
+	unsigned long edx;
+	unsigned long ecx;
+	unsigned long eax;
+	unsigned long trapno;
+	unsigned long err;
+	unsigned long eip;
+	unsigned short cs, __csh;
+	unsigned long eflags;
+	unsigned long esp_at_signal;
+	unsigned short ss, __ssh;
+	struct _fpstate __user * fpstate;
+	unsigned long oldmask;
+	unsigned long cr2;
+};
+
+
+#endif
diff --git a/include/asm-i386/siginfo.h b/include/asm-i386/siginfo.h
new file mode 100644
index 000000000000..fe18f98fccfa
--- /dev/null
+++ b/include/asm-i386/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _I386_SIGINFO_H
+#define _I386_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h
new file mode 100644
index 000000000000..7ef343b6812d
--- /dev/null
+++ b/include/asm-i386/signal.h
@@ -0,0 +1,237 @@
+#ifndef _ASMi386_SIGNAL_H
+#define _ASMi386_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+static __inline__ void sigaddset(sigset_t *set, int _sig)
+{
+	__asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static __inline__ void sigdelset(sigset_t *set, int _sig)
+{
+	__asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static __inline__ int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static __inline__ int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	__asm__("btl %2,%1\n\tsbbl %0,%0"
+		: "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+	return ret;
+}
+
+#define sigismember(set,sig)			\
+	(__builtin_constant_p(sig) ?		\
+	 __const_sigismember((set),(sig)) :	\
+	 __gen_sigismember((set),(sig)))
+
+static __inline__ int sigfindinword(unsigned long word)
+{
+	__asm__("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
+	return word;
+}
+
+struct pt_regs;
+extern int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset));
+
+#define ptrace_signal_deliver(regs, cookie)		\
+	do {						\
+		if (current->ptrace & PT_DTRACE) {	\
+			current->ptrace &= ~PT_DTRACE;	\
+			(regs)->eflags &= ~TF_MASK;	\
+		}					\
+	} while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h
new file mode 100644
index 000000000000..dd1491225d51
--- /dev/null
+++ b/include/asm-i386/smp.h
@@ -0,0 +1,90 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+/*
+ * We need the APIC definitions automatically as part of 'smp.h'
+ */
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#ifndef __ASSEMBLY__
+#include <asm/fixmap.h>
+#include <asm/bitops.h>
+#include <asm/mpspec.h>
+#ifdef CONFIG_X86_IO_APIC
+#include <asm/io_apic.h>
+#endif
+#include <asm/apic.h>
+#endif
+#endif
+
+#define BAD_APICID 0xFFu
+#ifdef CONFIG_SMP
+#ifndef __ASSEMBLY__
+
+/*
+ * Private routines/data
+ */
+ 
+extern void smp_alloc_memory(void);
+extern int pic_mode;
+extern int smp_num_siblings;
+extern cpumask_t cpu_sibling_map[];
+
+extern void smp_flush_tlb(void);
+extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
+extern void smp_invalidate_rcv(void);		/* Process an NMI */
+extern void (*mtrr_hook) (void);
+extern void zap_low_mappings (void);
+
+#define MAX_APICID 256
+extern u8 x86_cpu_to_apicid[];
+
+/*
+ * This function is needed by all SMP systems. It must _always_ be valid
+ * from the initial startup. We map APIC_BASE very early in page_setup(),
+ * so this is correct in the x86 case.
+ */
+#define __smp_processor_id() (current_thread_info()->cpu)
+
+extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_callin_map;
+#define cpu_possible_map cpu_callout_map
+
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#ifdef APIC_DEFINITION
+extern int hard_smp_processor_id(void);
+#else
+#include <mach_apicdef.h>
+static inline int hard_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_ID(*(unsigned long *)(APIC_BASE+APIC_ID));
+}
+#endif
+
+static __inline int logical_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
+}
+
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+
+#endif
+#endif
diff --git a/include/asm-i386/socket.h b/include/asm-i386/socket.h
new file mode 100644
index 000000000000..07f6b38ad140
--- /dev/null
+++ b/include/asm-i386/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-i386/sockios.h b/include/asm-i386/sockios.h
new file mode 100644
index 000000000000..6b747f8e228b
--- /dev/null
+++ b/include/asm-i386/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_I386_SOCKIOS__
+#define __ARCH_I386_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-i386/spinlock.h b/include/asm-i386/spinlock.h
new file mode 100644
index 000000000000..f9ff31f40036
--- /dev/null
+++ b/include/asm-i386/spinlock.h
@@ -0,0 +1,250 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+#include <linux/config.h>
+#include <linux/compiler.h>
+
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+	volatile unsigned int slock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPINLOCK_MAGIC	0xdead4ead
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPINLOCK_MAGIC_INIT	, SPINLOCK_MAGIC
+#else
+#define SPINLOCK_MAGIC_INIT	/* */
+#endif
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define spin_is_locked(x)	(*(volatile signed char *)(&(x)->slock) <= 0)
+#define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
+
+#define spin_lock_string \
+	"\n1:\t" \
+	"lock ; decb %0\n\t" \
+	"jns 3f\n" \
+	"2:\t" \
+	"rep;nop\n\t" \
+	"cmpb $0,%0\n\t" \
+	"jle 2b\n\t" \
+	"jmp 1b\n" \
+	"3:\n\t"
+
+#define spin_lock_string_flags \
+	"\n1:\t" \
+	"lock ; decb %0\n\t" \
+	"jns 4f\n\t" \
+	"2:\t" \
+	"testl $0x200, %1\n\t" \
+	"jz 3f\n\t" \
+	"sti\n\t" \
+	"3:\t" \
+	"rep;nop\n\t" \
+	"cmpb $0, %0\n\t" \
+	"jle 3b\n\t" \
+	"cli\n\t" \
+	"jmp 1b\n" \
+	"4:\n\t"
+
+/*
+ * This works. Despite all the confusion.
+ * (except on PPro SMP or if we are using OOSTORE)
+ * (PPro errata 66, 92)
+ */
+
+#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
+
+#define spin_unlock_string \
+	"movb $1,%0" \
+		:"=m" (lock->slock) : : "memory"
+
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(lock->magic != SPINLOCK_MAGIC);
+	BUG_ON(!spin_is_locked(lock));
+#endif
+	__asm__ __volatile__(
+		spin_unlock_string
+	);
+}
+
+#else
+
+#define spin_unlock_string \
+	"xchgb %b0, %1" \
+		:"=q" (oldval), "=m" (lock->slock) \
+		:"0" (oldval) : "memory"
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	char oldval = 1;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(lock->magic != SPINLOCK_MAGIC);
+	BUG_ON(!spin_is_locked(lock));
+#endif
+	__asm__ __volatile__(
+		spin_unlock_string
+	);
+}
+
+#endif
+
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	char oldval;
+	__asm__ __volatile__(
+		"xchgb %b0,%1"
+		:"=q" (oldval), "=m" (lock->slock)
+		:"0" (0) : "memory");
+	return oldval > 0;
+}
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
+		printk("eip: %p\n", __builtin_return_address(0));
+		BUG();
+	}
+#endif
+	__asm__ __volatile__(
+		spin_lock_string
+		:"=m" (lock->slock) : : "memory");
+}
+
+static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
+		printk("eip: %p\n", __builtin_return_address(0));
+		BUG();
+	}
+#endif
+	__asm__ __volatile__(
+		spin_lock_string_flags
+		:"=m" (lock->slock) : "r" (flags) : "memory");
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RWLOCK_MAGIC	0xdeaf1eed
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define RWLOCK_MAGIC_INIT	, RWLOCK_MAGIC
+#else
+#define RWLOCK_MAGIC_INIT	/* */
+#endif
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
+
+#define rwlock_init(x)	do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+/*
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores.  See
+ * semaphore.h for details.  -ben
+ */
+/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
+
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	__build_read_lock(rw, "__read_lock_failed");
+}
+
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	__build_write_lock(rw, "__write_lock_failed");
+}
+
+#define _raw_read_unlock(rw)		asm volatile("lock ; incl %0" :"=m" ((rw)->lock) : : "memory")
+#define _raw_write_unlock(rw)	asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ",%0":"=m" ((rw)->lock) : : "memory")
+
+static inline int _raw_read_trylock(rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	atomic_dec(count);
+	if (atomic_read(count) >= 0)
+		return 1;
+	atomic_inc(count);
+	return 0;
+}
+
+static inline int _raw_write_trylock(rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-i386/srat.h b/include/asm-i386/srat.h
new file mode 100644
index 000000000000..165ab4bdc02b
--- /dev/null
+++ b/include/asm-i386/srat.h
@@ -0,0 +1,37 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit 
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+
+#ifndef _ASM_SRAT_H_
+#define _ASM_SRAT_H_
+
+#ifndef CONFIG_ACPI_SRAT
+#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
+#endif
+
+extern int get_memcfg_from_srat(void);
+extern unsigned long *get_zholes_size(int);
+
+#endif /* _ASM_SRAT_H_ */
diff --git a/include/asm-i386/stat.h b/include/asm-i386/stat.h
new file mode 100644
index 000000000000..b464f8020ec4
--- /dev/null
+++ b/include/asm-i386/stat.h
@@ -0,0 +1,78 @@
+#ifndef _I386_STAT_H
+#define _I386_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif
diff --git a/include/asm-i386/statfs.h b/include/asm-i386/statfs.h
new file mode 100644
index 000000000000..24972c175132
--- /dev/null
+++ b/include/asm-i386/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _I386_STATFS_H
+#define _I386_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h
new file mode 100644
index 000000000000..1679983d053f
--- /dev/null
+++ b/include/asm-i386/string.h
@@ -0,0 +1,449 @@
+#ifndef _I386_STRING_H_
+#define _I386_STRING_H_
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+/*
+ * On a 486 or Pentium, we are better off not using the
+ * byte string operations. But on a 386 or a PPro the
+ * byte string ops are faster than doing it by hand
+ * (MUCH faster on a Pentium).
+ */
+
+/*
+ * This string-include defines all string functions as inline
+ * functions. Use gcc. It also assumes ds=es=data space, this should be
+ * normal. Most of the string-functions are rather heavily hand-optimized,
+ * see especially strsep,strstr,str[c]spn. They should work, but are not
+ * very easy to understand. Everything is done entirely within the register
+ * set, making the functions fast and clean. String instructions have been
+ * used through-out, making for "slightly" unclear code :-)
+ *
+ *		NO Copyright (C) 1991, 1992 Linus Torvalds,
+ *		consider these trivial functions to be PD.
+ */
+
+/* AK: in fact I bet it would be better to move this stuff all out of line.
+ */
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+int d0, d1, d2;
+__asm__ __volatile__(
+	"1:\tlodsb\n\t"
+	"stosb\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b"
+	: "=&S" (d0), "=&D" (d1), "=&a" (d2)
+	:"0" (src),"1" (dest) : "memory");
+return dest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char * dest,const char *src,size_t count)
+{
+int d0, d1, d2, d3;
+__asm__ __volatile__(
+	"1:\tdecl %2\n\t"
+	"js 2f\n\t"
+	"lodsb\n\t"
+	"stosb\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b\n\t"
+	"rep\n\t"
+	"stosb\n"
+	"2:"
+	: "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
+	:"0" (src),"1" (dest),"2" (count) : "memory");
+return dest;
+}
+
+#define __HAVE_ARCH_STRCAT
+static inline char * strcat(char * dest,const char * src)
+{
+int d0, d1, d2, d3;
+__asm__ __volatile__(
+	"repne\n\t"
+	"scasb\n\t"
+	"decl %1\n"
+	"1:\tlodsb\n\t"
+	"stosb\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b"
+	: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
+	: "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu):"memory");
+return dest;
+}
+
+#define __HAVE_ARCH_STRNCAT
+static inline char * strncat(char * dest,const char * src,size_t count)
+{
+int d0, d1, d2, d3;
+__asm__ __volatile__(
+	"repne\n\t"
+	"scasb\n\t"
+	"decl %1\n\t"
+	"movl %8,%3\n"
+	"1:\tdecl %3\n\t"
+	"js 2f\n\t"
+	"lodsb\n\t"
+	"stosb\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b\n"
+	"2:\txorl %2,%2\n\t"
+	"stosb"
+	: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
+	: "0" (src),"1" (dest),"2" (0),"3" (0xffffffffu), "g" (count)
+	: "memory");
+return dest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+int d0, d1;
+register int __res;
+__asm__ __volatile__(
+	"1:\tlodsb\n\t"
+	"scasb\n\t"
+	"jne 2f\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b\n\t"
+	"xorl %%eax,%%eax\n\t"
+	"jmp 3f\n"
+	"2:\tsbbl %%eax,%%eax\n\t"
+	"orb $1,%%al\n"
+	"3:"
+	:"=a" (__res), "=&S" (d0), "=&D" (d1)
+		     :"1" (cs),"2" (ct));
+return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+register int __res;
+int d0, d1, d2;
+__asm__ __volatile__(
+	"1:\tdecl %3\n\t"
+	"js 2f\n\t"
+	"lodsb\n\t"
+	"scasb\n\t"
+	"jne 3f\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b\n"
+	"2:\txorl %%eax,%%eax\n\t"
+	"jmp 4f\n"
+	"3:\tsbbl %%eax,%%eax\n\t"
+	"orb $1,%%al\n"
+	"4:"
+		     :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
+		     :"1" (cs),"2" (ct),"3" (count));
+return __res;
+}
+
+#define __HAVE_ARCH_STRCHR
+static inline char * strchr(const char * s, int c)
+{
+int d0;
+register char * __res;
+__asm__ __volatile__(
+	"movb %%al,%%ah\n"
+	"1:\tlodsb\n\t"
+	"cmpb %%ah,%%al\n\t"
+	"je 2f\n\t"
+	"testb %%al,%%al\n\t"
+	"jne 1b\n\t"
+	"movl $1,%1\n"
+	"2:\tmovl %1,%0\n\t"
+	"decl %0"
+	:"=a" (__res), "=&S" (d0) : "1" (s),"0" (c));
+return __res;
+}
+
+#define __HAVE_ARCH_STRRCHR
+static inline char * strrchr(const char * s, int c)
+{
+int d0, d1;
+register char * __res;
+__asm__ __volatile__(
+	"movb %%al,%%ah\n"
+	"1:\tlodsb\n\t"
+	"cmpb %%ah,%%al\n\t"
+	"jne 2f\n\t"
+	"leal -1(%%esi),%0\n"
+	"2:\ttestb %%al,%%al\n\t"
+	"jne 1b"
+	:"=g" (__res), "=&S" (d0), "=&a" (d1) :"0" (0),"1" (s),"2" (c));
+return __res;
+}
+
+#define __HAVE_ARCH_STRLEN
+static inline size_t strlen(const char * s)
+{
+int d0;
+register int __res;
+__asm__ __volatile__(
+	"repne\n\t"
+	"scasb\n\t"
+	"notl %0\n\t"
+	"decl %0"
+	:"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffffu));
+return __res;
+}
+
+static inline void * __memcpy(void * to, const void * from, size_t n)
+{
+int d0, d1, d2;
+__asm__ __volatile__(
+	"rep ; movsl\n\t"
+	"testb $2,%b4\n\t"
+	"je 1f\n\t"
+	"movsw\n"
+	"1:\ttestb $1,%b4\n\t"
+	"je 2f\n\t"
+	"movsb\n"
+	"2:"
+	: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+	:"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from)
+	: "memory");
+return (to);
+}
+
+/*
+ * This looks horribly ugly, but the compiler can optimize it totally,
+ * as the count is constant.
+ */
+static inline void * __constant_memcpy(void * to, const void * from, size_t n)
+{
+	if (n <= 128)
+		return __builtin_memcpy(to, from, n);
+
+#define COMMON(x) \
+__asm__ __volatile__( \
+	"rep ; movsl" \
+	x \
+	: "=&c" (d0), "=&D" (d1), "=&S" (d2) \
+	: "0" (n/4),"1" ((long) to),"2" ((long) from) \
+	: "memory");
+{
+	int d0, d1, d2;
+	switch (n % 4) {
+		case 0: COMMON(""); return to;
+		case 1: COMMON("\n\tmovsb"); return to;
+		case 2: COMMON("\n\tmovsw"); return to;
+		default: COMMON("\n\tmovsw\n\tmovsb"); return to;
+	}
+}
+  
+#undef COMMON
+}
+
+#define __HAVE_ARCH_MEMCPY
+
+#ifdef CONFIG_X86_USE_3DNOW
+
+#include <asm/mmx.h>
+
+/*
+ *	This CPU favours 3DNow strongly (eg AMD Athlon)
+ */
+
+static inline void * __constant_memcpy3d(void * to, const void * from, size_t len)
+{
+	if (len < 512)
+		return __constant_memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+static __inline__ void *__memcpy3d(void *to, const void *from, size_t len)
+{
+	if (len < 512)
+		return __memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy3d((t),(f),(n)) : \
+ __memcpy3d((t),(f),(n)))
+
+#else
+
+/*
+ *	No 3D Now!
+ */
+ 
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __memcpy((t),(f),(n)))
+
+#endif
+
+#define __HAVE_ARCH_MEMMOVE
+void *memmove(void * dest,const void * src, size_t n);
+
+#define memcmp __builtin_memcmp
+
+#define __HAVE_ARCH_MEMCHR
+static inline void * memchr(const void * cs,int c,size_t count)
+{
+int d0;
+register void * __res;
+if (!count)
+	return NULL;
+__asm__ __volatile__(
+	"repne\n\t"
+	"scasb\n\t"
+	"je 1f\n\t"
+	"movl $1,%0\n"
+	"1:\tdecl %0"
+	:"=D" (__res), "=&c" (d0) : "a" (c),"0" (cs),"1" (count));
+return __res;
+}
+
+static inline void * __memset_generic(void * s, char c,size_t count)
+{
+int d0, d1;
+__asm__ __volatile__(
+	"rep\n\t"
+	"stosb"
+	: "=&c" (d0), "=&D" (d1)
+	:"a" (c),"1" (s),"0" (count)
+	:"memory");
+return s;
+}
+
+/* we might want to write optimized versions of these later */
+#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count))
+
+/*
+ * memset(x,0,y) is a reasonably common thing to do, so we want to fill
+ * things 32 bits at a time even when we don't know the size of the
+ * area at compile-time..
+ */
+static inline void * __constant_c_memset(void * s, unsigned long c, size_t count)
+{
+int d0, d1;
+__asm__ __volatile__(
+	"rep ; stosl\n\t"
+	"testb $2,%b3\n\t"
+	"je 1f\n\t"
+	"stosw\n"
+	"1:\ttestb $1,%b3\n\t"
+	"je 2f\n\t"
+	"stosb\n"
+	"2:"
+	: "=&c" (d0), "=&D" (d1)
+	:"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
+	:"memory");
+return (s);	
+}
+
+/* Added by Gertjan van Wingerde to make minix and sysv module work */
+#define __HAVE_ARCH_STRNLEN
+static inline size_t strnlen(const char * s, size_t count)
+{
+int d0;
+register int __res;
+__asm__ __volatile__(
+	"movl %2,%0\n\t"
+	"jmp 2f\n"
+	"1:\tcmpb $0,(%0)\n\t"
+	"je 3f\n\t"
+	"incl %0\n"
+	"2:\tdecl %1\n\t"
+	"cmpl $-1,%1\n\t"
+	"jne 1b\n"
+	"3:\tsubl %2,%0"
+	:"=a" (__res), "=&d" (d0)
+	:"c" (s),"1" (count));
+return __res;
+}
+/* end of additional stuff */
+
+#define __HAVE_ARCH_STRSTR
+
+extern char *strstr(const char *cs, const char *ct);
+
+/*
+ * This looks horribly ugly, but the compiler can optimize it totally,
+ * as we by now know that both pattern and count is constant..
+ */
+static inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count)
+{
+	switch (count) {
+		case 0:
+			return s;
+		case 1:
+			*(unsigned char *)s = pattern;
+			return s;
+		case 2:
+			*(unsigned short *)s = pattern;
+			return s;
+		case 3:
+			*(unsigned short *)s = pattern;
+			*(2+(unsigned char *)s) = pattern;
+			return s;
+		case 4:
+			*(unsigned long *)s = pattern;
+			return s;
+	}
+#define COMMON(x) \
+__asm__  __volatile__( \
+	"rep ; stosl" \
+	x \
+	: "=&c" (d0), "=&D" (d1) \
+	: "a" (pattern),"0" (count/4),"1" ((long) s) \
+	: "memory")
+{
+	int d0, d1;
+	switch (count % 4) {
+		case 0: COMMON(""); return s;
+		case 1: COMMON("\n\tstosb"); return s;
+		case 2: COMMON("\n\tstosw"); return s;
+		default: COMMON("\n\tstosw\n\tstosb"); return s;
+	}
+}
+  
+#undef COMMON
+}
+
+#define __constant_c_x_memset(s, c, count) \
+(__builtin_constant_p(count) ? \
+ __constant_c_and_count_memset((s),(c),(count)) : \
+ __constant_c_memset((s),(c),(count)))
+
+#define __memset(s, c, count) \
+(__builtin_constant_p(count) ? \
+ __constant_count_memset((s),(c),(count)) : \
+ __memset_generic((s),(c),(count)))
+
+#define __HAVE_ARCH_MEMSET
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? \
+ __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \
+ __memset((s),(c),(count)))
+
+/*
+ * find the first occurrence of byte 'c', or 1 past the area if none
+ */
+#define __HAVE_ARCH_MEMSCAN
+static inline void * memscan(void * addr, int c, size_t size)
+{
+	if (!size)
+		return addr;
+	__asm__("repnz; scasb\n\t"
+		"jnz 1f\n\t"
+		"dec %%edi\n"
+		"1:"
+		: "=D" (addr), "=c" (size)
+		: "0" (addr), "1" (size), "a" (c));
+	return addr;
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-i386/suspend.h b/include/asm-i386/suspend.h
new file mode 100644
index 000000000000..dfc1114c1b6f
--- /dev/null
+++ b/include/asm-i386/suspend.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2001-2002 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int
+arch_prepare_suspend(void)
+{
+	/* If you want to make non-PSE machine work, turn off paging
+           in swsusp_arch_suspend. swsusp_pg_dir should have identity mapping, so
+           it could work...  */
+	if (!cpu_has_pse) {
+		printk(KERN_ERR "PSE is required for swsusp.\n");
+		return -EPERM;
+	}
+	return 0;
+}
+
+/* image of the saved processor state */
+struct saved_context {
+  	u16 es, fs, gs, ss;
+	unsigned long cr0, cr2, cr3, cr4;
+	u16 gdt_pad;
+	u16 gdt_limit;
+	unsigned long gdt_base;
+	u16 idt_pad;
+	u16 idt_limit;
+	unsigned long idt_base;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+} __attribute__((packed));
+
+#define loaddebug(thread,register) \
+               __asm__("movl %0,%%db" #register  \
+                       : /* no output */ \
+                       :"r" ((thread)->debugreg[register]))
+
+#ifdef CONFIG_ACPI_SLEEP
+extern unsigned long saved_eip;
+extern unsigned long saved_esp;
+extern unsigned long saved_ebp;
+extern unsigned long saved_ebx;
+extern unsigned long saved_esi;
+extern unsigned long saved_edi;
+
+static inline void acpi_save_register_state(unsigned long return_point)
+{
+	saved_eip = return_point;
+	asm volatile ("movl %%esp,%0" : "=m" (saved_esp));
+	asm volatile ("movl %%ebp,%0" : "=m" (saved_ebp));
+	asm volatile ("movl %%ebx,%0" : "=m" (saved_ebx));
+	asm volatile ("movl %%edi,%0" : "=m" (saved_edi));
+	asm volatile ("movl %%esi,%0" : "=m" (saved_esi));
+}
+
+#define acpi_restore_register_state()  do {} while (0)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+#endif
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
new file mode 100644
index 000000000000..6f74d4c44a0e
--- /dev/null
+++ b/include/asm-i386/system.h
@@ -0,0 +1,473 @@
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <linux/bitops.h> /* for LOCK_PREFIX */
+
+#ifdef __KERNEL__
+
+struct task_struct;	/* one of the stranger aspects of C forward declarations.. */
+extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
+
+#define switch_to(prev,next,last) do {					\
+	unsigned long esi,edi;						\
+	asm volatile("pushfl\n\t"					\
+		     "pushl %%ebp\n\t"					\
+		     "movl %%esp,%0\n\t"	/* save ESP */		\
+		     "movl %5,%%esp\n\t"	/* restore ESP */	\
+		     "movl $1f,%1\n\t"		/* save EIP */		\
+		     "pushl %6\n\t"		/* restore EIP */	\
+		     "jmp __switch_to\n"				\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"					\
+		     "popfl"						\
+		     :"=m" (prev->thread.esp),"=m" (prev->thread.eip),	\
+		      "=a" (last),"=S" (esi),"=D" (edi)			\
+		     :"m" (next->thread.esp),"m" (next->thread.eip),	\
+		      "2" (prev), "d" (next));				\
+} while (0)
+
+#define _set_base(addr,base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+         "0" (base) \
+        ); } while(0)
+
+#define _set_limit(addr,limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+        ); } while(0)
+
+#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) )
+#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1)>>12 )
+
+static inline unsigned long _get_base(char * addr)
+{
+	unsigned long __base;
+	__asm__("movb %3,%%dh\n\t"
+		"movb %2,%%dl\n\t"
+		"shll $16,%%edx\n\t"
+		"movw %1,%%dx"
+		:"=&d" (__base)
+		:"m" (*((addr)+2)),
+		 "m" (*((addr)+4)),
+		 "m" (*((addr)+7)));
+	return __base;
+}
+
+#define get_base(ldt) _get_base( ((char *)&(ldt)) )
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg,value)			\
+	asm volatile("\n"			\
+		"1:\t"				\
+		"movl %0,%%" #seg "\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:\t"				\
+		"pushl $0\n\t"			\
+		"popl %%" #seg "\n\t"		\
+		"jmp 2b\n"			\
+		".previous\n"			\
+		".section __ex_table,\"a\"\n\t"	\
+		".align 4\n\t"			\
+		".long 1b,3b\n"			\
+		".previous"			\
+		: :"m" (*(unsigned int *)&(value)))
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value) \
+	asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value)))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+#define read_cr0() ({ \
+	unsigned int __dummy; \
+	__asm__( \
+		"movl %%cr0,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr0(x) \
+	__asm__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr4() ({ \
+	unsigned int __dummy; \
+	__asm__( \
+		"movl %%cr4,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr4(x) \
+	__asm__("movl %0,%%cr4": :"r" (x));
+#define stts() write_cr0(8 | read_cr0())
+
+#endif	/* __KERNEL__ */
+
+#define wbinvd() \
+	__asm__ __volatile__ ("wbinvd": : :"memory");
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	__asm__("lsll %1,%0"
+		:"=r" (__limit):"r" (segment));
+	return __limit+1;
+}
+
+#define nop() __asm__ __volatile__ ("nop")
+
+#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+
+/*
+ * The semantics of XCHGCMP8B are a bit strange, this is why
+ * there is a loop and the loading of %%eax and %%edx has to
+ * be inside. This inlines well in most cases, the cached
+ * cost is around ~38 cycles. (in the future we might want
+ * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
+ * might have an implicit FPU-save as a cost, so it's not
+ * clear which path to go.)
+ *
+ * cmpxchg8b must be used with the lock prefix here to allow
+ * the instruction to be executed atomically, see page 3-102
+ * of the instruction set reference 24319102.pdf. We need
+ * the reader side to see the coherent 64bit value.
+ */
+static inline void __set_64bit (unsigned long long * ptr,
+		unsigned int low, unsigned int high)
+{
+	__asm__ __volatile__ (
+		"\n1:\t"
+		"movl (%0), %%eax\n\t"
+		"movl 4(%0), %%edx\n\t"
+		"lock cmpxchg8b (%0)\n\t"
+		"jnz 1b"
+		: /* no outputs */
+		:	"D"(ptr),
+			"b"(low),
+			"c"(high)
+		:	"ax","dx","memory");
+}
+
+static inline void __set_64bit_constant (unsigned long long *ptr,
+						 unsigned long long value)
+{
+	__set_64bit(ptr,(unsigned int)(value), (unsigned int)((value)>>32ULL));
+}
+#define ll_low(x)	*(((unsigned int*)&(x))+0)
+#define ll_high(x)	*(((unsigned int*)&(x))+1)
+
+static inline void __set_64bit_var (unsigned long long *ptr,
+			 unsigned long long value)
+{
+	__set_64bit(ptr,ll_low(value), ll_high(value));
+}
+
+#define set_64bit(ptr,value) \
+(__builtin_constant_p(value) ? \
+ __set_64bit_constant(ptr, value) : \
+ __set_64bit_var(ptr, value) )
+
+#define _set_64bit(ptr,value) \
+(__builtin_constant_p(value) ? \
+ __set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \
+ __set_64bit(ptr, ll_low(value), ll_high(value)) )
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+		case 1:
+			__asm__ __volatile__("xchgb %b0,%1"
+				:"=q" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 2:
+			__asm__ __volatile__("xchgw %w0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 4:
+			__asm__ __volatile__("xchgl %0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#ifdef CONFIG_X86_CMPXCHG
+#define __HAVE_ARCH_CMPXCHG 1
+#endif
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 2:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 4:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+					(unsigned long)(n),sizeof(*(ptr))))
+    
+#ifdef __KERNEL__
+struct alt_instr { 
+	__u8 *instr; 		/* original instruction */
+	__u8 *replacement;
+	__u8  cpuid;		/* cpuid bit set for replacement */
+	__u8  instrlen;		/* length of original instruction */
+	__u8  replacementlen; 	/* length of new instruction, <= instrlen */ 
+	__u8  pad;
+}; 
+#endif
+
+/* 
+ * Alternative instructions for different CPU types or capabilities.
+ * 
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ * 
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ * 
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature) 	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n" 		     \
+		      ".section .altinstructions,\"a\"\n"     	     \
+		      "  .align 4\n"				       \
+		      "  .long 661b\n"            /* label */          \
+		      "  .long 663f\n"		  /* new instruction */ 	\
+		      "  .byte %c0\n"             /* feature bit */    \
+		      "  .byte 662b-661b\n"       /* sourcelen */      \
+		      "  .byte 664f-663f\n"       /* replacementlen */ \
+		      ".previous\n"						\
+		      ".section .altinstr_replacement,\"ax\"\n"			\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */    \
+		      ".previous" :: "i" (feature) : "memory")  
+
+/*
+ * Alternative inline assembly with input.
+ * 
+ * Pecularities:
+ * No memory clobber here. 
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the 
+ * replacement maake sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)		\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"				\
+		      ".section .altinstructions,\"a\"\n"			\
+		      "  .align 4\n"						\
+		      "  .long 661b\n"            /* label */			\
+		      "  .long 663f\n"		  /* new instruction */ 	\
+		      "  .byte %c0\n"             /* feature bit */		\
+		      "  .byte 662b-661b\n"       /* sourcelen */		\
+		      "  .byte 664f-663f\n"       /* replacementlen */ 		\
+		      ".previous\n"						\
+		      ".section .altinstr_replacement,\"ax\"\n"			\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */ 	\
+		      ".previous" :: "i" (feature), ##input)
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+ 
+
+/* 
+ * Actually only lfence would be needed for mb() because all stores done 
+ * by the kernel should be already ordered. But keep a full barrier for now. 
+ */
+
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like thiswhere there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_X86_OOSTORE
+/* Actually there are no OOO store capable CPUs for now that do SSE, 
+   but make it already an possibility. */
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define wmb()	__asm__ __volatile__ ("": : :"memory")
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/* interrupt control.. */
+#define local_save_flags(x)	do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
+#define local_irq_restore(x) 	do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0)
+#define local_irq_disable() 	__asm__ __volatile__("cli": : :"memory")
+#define local_irq_enable()	__asm__ __volatile__("sti": : :"memory")
+/* used in the idle loop; sti takes one instruction cycle to complete */
+#define safe_halt()		__asm__ __volatile__("sti; hlt": : :"memory")
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	!(flags & (1<<9));		\
+})
+
+/* For spinlocks etc */
+#define local_irq_save(x)	__asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory")
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+extern int es7000_plat;
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif
diff --git a/include/asm-i386/termbits.h b/include/asm-i386/termbits.h
new file mode 100644
index 000000000000..72c10e3190f8
--- /dev/null
+++ b/include/asm-i386/termbits.h
@@ -0,0 +1,173 @@
+#ifndef __ARCH_I386_TERMBITS_H__
+#define __ARCH_I386_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/include/asm-i386/termios.h b/include/asm-i386/termios.h
new file mode 100644
index 000000000000..03f548536d6b
--- /dev/null
+++ b/include/asm-i386/termios.h
@@ -0,0 +1,107 @@
+#ifndef _I386_TERMIOS_H
+#define _I386_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _I386_TERMIOS_H */
diff --git a/include/asm-i386/thread_info.h b/include/asm-i386/thread_info.h
new file mode 100644
index 000000000000..2cd57271801d
--- /dev/null
+++ b/include/asm-i386/thread_info.h
@@ -0,0 +1,174 @@
+/* thread_info.h: i386 low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block    restart_block;
+
+	unsigned long           previous_esp;   /* ESP of the previous stack in case
+						   of nested (IRQ) stacks
+						*/
+	__u8			supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm_offsets.h>
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE            (4096)
+#else
+#define THREAD_SIZE		(8192)
+#endif
+
+#define STACK_WARN             (THREAD_SIZE/8)
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("andl %%esp,%0; ":"=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+	return ti;
+}
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("esp") __attribute_used__;
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+	({							\
+		struct thread_info *ret;			\
+								\
+		ret = kmalloc(THREAD_SIZE, GFP_KERNEL);		\
+		if (ret)					\
+			memset(ret, 0, THREAD_SIZE);		\
+		ret;						\
+	})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info)	kfree(info)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+	movl $-THREAD_SIZE, reg; \
+	andl %esp, reg
+
+/* use this one if reg already contains %esp */
+#define GET_THREAD_INFO_WITH_ESP(reg) \
+	andl $-THREAD_SIZE, reg
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_IRET		5	/* return with iret */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SECCOMP		8	/* secure computing */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK \
+  (0x0000FFFF & ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP))
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(0x0000FFFF & ~_TIF_SECCOMP)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h
new file mode 100644
index 000000000000..40c54f69780e
--- /dev/null
+++ b/include/asm-i386/timer.h
@@ -0,0 +1,64 @@
+#ifndef _ASMi386_TIMER_H
+#define _ASMi386_TIMER_H
+#include <linux/init.h>
+
+/**
+ * struct timer_ops - used to define a timer source
+ *
+ * @name: name of the timer.
+ * @init: Probes and initializes the timer. Takes clock= override 
+ *        string as an argument. Returns 0 on success, anything else
+ *        on failure.
+ * @mark_offset: called by the timer interrupt.
+ * @get_offset:  called by gettimeofday(). Returns the number of microseconds
+ *               since the last timer interupt.
+ * @monotonic_clock: returns the number of nanoseconds since the init of the
+ *                   timer.
+ * @delay: delays this many clock cycles.
+ */
+struct timer_opts {
+	char* name;
+	void (*mark_offset)(void);
+	unsigned long (*get_offset)(void);
+	unsigned long long (*monotonic_clock)(void);
+	void (*delay)(unsigned long);
+};
+
+struct init_timer_opts {
+	int (*init)(char *override);
+	struct timer_opts *opts;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct timer_opts* __init select_timer(void);
+extern void clock_fallback(void);
+void setup_pit_timer(void);
+
+/* Modifiers for buggy PIT handling */
+
+extern int pit_latch_buggy;
+
+extern struct timer_opts *cur_timer;
+extern int timer_ack;
+
+/* list of externed timers */
+extern struct timer_opts timer_none;
+extern struct timer_opts timer_pit;
+extern struct init_timer_opts timer_pit_init;
+extern struct init_timer_opts timer_tsc_init;
+#ifdef CONFIG_X86_CYCLONE_TIMER
+extern struct init_timer_opts timer_cyclone_init;
+#endif
+
+extern unsigned long calibrate_tsc(void);
+extern void init_cpu_khz(void);
+#ifdef CONFIG_HPET_TIMER
+extern struct init_timer_opts timer_hpet_init;
+extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr);
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern struct init_timer_opts timer_pmtmr_init;
+#endif
+#endif
diff --git a/include/asm-i386/timex.h b/include/asm-i386/timex.h
new file mode 100644
index 000000000000..b41e484c3445
--- /dev/null
+++ b/include/asm-i386/timex.h
@@ -0,0 +1,52 @@
+/*
+ * linux/include/asm-i386/timex.h
+ *
+ * i386 architecture timex specifications
+ */
+#ifndef _ASMi386_TIMEX_H
+#define _ASMi386_TIMEX_H
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_X86_ELAN
+#  define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#else
+#  define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
+#endif
+
+
+/*
+ * Standard way to access the cycle counter on i586+ CPUs.
+ * Currently only used on SMP.
+ *
+ * If you really have a SMP machine with i486 chips or older,
+ * compile for that, and this will just always return zero.
+ * That's ok, it just means that the nicer scheduling heuristics
+ * won't work for you.
+ *
+ * We only use the low 32 bits, and we'd simply better make sure
+ * that we reschedule before that wraps. Scheduling at least every
+ * four billion cycles just basically sounds like a good idea,
+ * regardless of how fast the machine is. 
+ */
+typedef unsigned long long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	unsigned long long ret=0;
+
+#ifndef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		return 0;
+#endif
+
+#if defined(CONFIG_X86_GENERIC) || defined(CONFIG_X86_TSC)
+	rdtscll(ret);
+#endif
+	return ret;
+}
+
+extern unsigned long cpu_khz;
+
+#endif
diff --git a/include/asm-i386/tlb.h b/include/asm-i386/tlb.h
new file mode 100644
index 000000000000..c006c5c92bea
--- /dev/null
+++ b/include/asm-i386/tlb.h
@@ -0,0 +1,20 @@
+#ifndef _I386_TLB_H
+#define _I386_TLB_H
+
+/*
+ * x86 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h
new file mode 100644
index 000000000000..f22fab0cea26
--- /dev/null
+++ b/include/asm-i386/tlbflush.h
@@ -0,0 +1,147 @@
+#ifndef _I386_TLBFLUSH_H
+#define _I386_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#define __flush_tlb()							\
+	do {								\
+		unsigned int tmpreg;					\
+									\
+		__asm__ __volatile__(					\
+			"movl %%cr3, %0;              \n"		\
+			"movl %0, %%cr3;  # flush TLB \n"		\
+			: "=r" (tmpreg)					\
+			:: "memory");					\
+	} while (0)
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+#define __flush_tlb_global()						\
+	do {								\
+		unsigned int tmpreg;					\
+									\
+		__asm__ __volatile__(					\
+			"movl %1, %%cr4;  # turn off PGE     \n"	\
+			"movl %%cr3, %0;                     \n"	\
+			"movl %0, %%cr3;  # flush TLB        \n"	\
+			"movl %2, %%cr4;  # turn PGE back on \n"	\
+			: "=&r" (tmpreg)				\
+			: "r" (mmu_cr4_features & ~X86_CR4_PGE),	\
+			  "r" (mmu_cr4_features)			\
+			: "memory");					\
+	} while (0)
+
+extern unsigned long pgkern_mask;
+
+# define __flush_tlb_all()						\
+	do {								\
+		if (cpu_has_pge)					\
+			__flush_tlb_global();				\
+		else							\
+			__flush_tlb();					\
+	} while (0)
+
+#define cpu_has_invlpg	(boot_cpu_data.x86 > 3)
+
+#define __flush_tlb_single(addr) \
+	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
+
+#ifdef CONFIG_X86_INVLPG
+# define __flush_tlb_one(addr) __flush_tlb_single(addr)
+#else
+# define __flush_tlb_one(addr)						\
+	do {								\
+		if (cpu_has_invlpg)					\
+			__flush_tlb_single(addr);			\
+		else							\
+			__flush_tlb();					\
+	} while (0)
+#endif
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ *
+ * ..but the i386 has somewhat limited tlb flushing capabilities,
+ * and page-granular flushes are available only on i486 and up.
+ */
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb() __flush_tlb()
+#define flush_tlb_all() __flush_tlb_all()
+#define local_flush_tlb() __flush_tlb()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long addr)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb_one(addr);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb();
+}
+
+#else
+
+#include <asm/smp.h>
+
+#define local_flush_tlb() \
+	__flush_tlb()
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+
+#define flush_tlb()	flush_tlb_current_task()
+
+static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+#define TLBSTATE_OK	1
+#define TLBSTATE_LAZY	2
+
+struct tlb_state
+{
+	struct mm_struct *active_mm;
+	int state;
+	char __cacheline_padding[L1_CACHE_BYTES-8];
+};
+DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+
+
+#endif
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	/* i386 does not keep any page table caches in TLB */
+}
+
+#endif /* _I386_TLBFLUSH_H */
diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h
new file mode 100644
index 000000000000..98f9e6850cba
--- /dev/null
+++ b/include/asm-i386/topology.h
@@ -0,0 +1,108 @@
+/*
+ * linux/include/asm-i386/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_I386_TOPOLOGY_H
+#define _ASM_I386_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mpspec.h>
+
+#include <linux/cpumask.h>
+
+/* Mappings between logical cpu number and node number */
+extern cpumask_t node_2_cpu_mask[];
+extern int cpu_2_node[];
+
+/* Returns the number of the node containing CPU 'cpu' */
+static inline int cpu_to_node(int cpu)
+{ 
+	return cpu_2_node[cpu];
+}
+
+/* Returns the number of the node containing Node 'node'.  This architecture is flat, 
+   so it is a pretty simple function! */
+#define parent_node(node) (node)
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return node_2_cpu_mask[node];
+}
+
+/* Returns the number of the first CPU on Node 'node'. */
+static inline int node_to_first_cpu(int node)
+{ 
+	cpumask_t mask = node_to_cpumask(node);
+	return first_cpu(mask);
+}
+
+/* Returns the number of the node containing PCI bus number 'busnr' */
+static inline cpumask_t __pcibus_to_cpumask(int busnr)
+{
+	return node_to_cpumask(mp_bus_id_to_node[busnr]);
+}
+#define pcibus_to_cpumask(bus)	__pcibus_to_cpumask(bus->number)
+
+/* sched_domains SD_NODE_INIT for NUMAQ machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+extern unsigned long node_start_pfn[];
+extern unsigned long node_end_pfn[];
+extern unsigned long node_remap_size[];
+
+#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
+
+#else /* !CONFIG_NUMA */
+/*
+ * Other i386 platforms should define their own version of the 
+ * above macros here.
+ */
+
+#include <asm-generic/topology.h>
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_I386_TOPOLOGY_H */
diff --git a/include/asm-i386/types.h b/include/asm-i386/types.h
new file mode 100644
index 000000000000..901b77c42b8a
--- /dev/null
+++ b/include/asm-i386/types.h
@@ -0,0 +1,72 @@
+#ifndef _I386_TYPES_H
+#define _I386_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* DMA addresses come in generic and 64-bit flavours.  */
+
+#ifdef CONFIG_HIGHMEM64G
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-i386/uaccess.h b/include/asm-i386/uaccess.h
new file mode 100644
index 000000000000..886867aea947
--- /dev/null
+++ b/include/asm-i386/uaccess.h
@@ -0,0 +1,539 @@
+#ifndef __i386_UACCESS_H
+#define __i386_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+	int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define __addr_ok(addr) ((unsigned long __force)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
+ *
+ * This needs 33-bit arithmetic. We have a carry...
+ */
+#define __range_ok(addr,size) ({ \
+	unsigned long flag,sum; \
+	__chk_user_ptr(addr); \
+	asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
+		:"=&r" (flag), "=r" (sum) \
+		:"1" (addr),"g" ((int)(size)),"g" (current_thread_info()->addr_limit.seg)); \
+	flag; })
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
+
+/**
+ * verify_area: - Obsolete/deprecated and will go away soon,
+ * use access_ok() instead.
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This function has been replaced by access_ok().
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns zero if the memory block may be valid, -EFAULT
+ * if it is definitely invalid.
+ *
+ * See access_ok() for more details.
+ */
+static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern void __get_user_1(void);
+extern void __get_user_2(void);
+extern void __get_user_4(void);
+
+#define __get_user_x(size,ret,x,ptr) \
+	__asm__ __volatile__("call __get_user_" #size \
+		:"=a" (ret),"=d" (x) \
+		:"0" (ptr))
+
+
+/* Careful: we have to cast the result to the type of the pointer for sign reasons */
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr)							\
+({	int __ret_gu;							\
+	unsigned long __val_gu;						\
+	__chk_user_ptr(ptr);						\
+	switch(sizeof (*(ptr))) {					\
+	case 1:  __get_user_x(1,__ret_gu,__val_gu,ptr); break;		\
+	case 2:  __get_user_x(2,__ret_gu,__val_gu,ptr); break;		\
+	case 4:  __get_user_x(4,__ret_gu,__val_gu,ptr); break;		\
+	default: __get_user_x(X,__ret_gu,__val_gu,ptr); break;		\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax, no clobbers.
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr))
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+#define put_user(x,ptr)						\
+({	int __ret_pu;						\
+	__chk_user_ptr(ptr);					\
+	switch(sizeof(*(ptr))) {				\
+	case 1: __put_user_1(x, ptr); break;			\
+	case 2: __put_user_2(x, ptr); break;			\
+	case 4: __put_user_4(x, ptr); break;			\
+	case 8: __put_user_8(x, ptr); break;			\
+	default:__put_user_X(x, ptr); break;			\
+	}							\
+	__ret_pu;						\
+})
+
+#else
+#define put_user(x,ptr)						\
+({								\
+ 	int __ret_pu;						\
+	__typeof__(*(ptr)) __pus_tmp = x;			\
+	__ret_pu=0;						\
+	if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp,		\
+				sizeof(*(ptr))) != 0))		\
+ 		__ret_pu=-EFAULT;				\
+ 	__ret_pu;						\
+ })
+
+
+#endif
+
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__put_user_size((x),(ptr),(size),__pu_err,-EFAULT);	\
+	__pu_err;						\
+})
+
+
+#define __put_user_u64(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	movl %%eax,0(%2)\n"			\
+		"2:	movl %%edx,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	movl %3,%0\n"				\
+		"	jmp 3b\n"				\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 4\n"				\
+		"	.long 1b,4b\n"				\
+		"	.long 2b,4b\n"				\
+		".previous"					\
+		: "=r"(err)					\
+		: "A" (x), "r" (addr), "i"(-EFAULT), "0"(err))
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+#define __put_user_size(x,ptr,size,retval,errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1: __put_user_asm(x,ptr,retval,"b","b","iq",errret);break;	\
+	case 2: __put_user_asm(x,ptr,retval,"w","w","ir",errret);break; \
+	case 4: __put_user_asm(x,ptr,retval,"l","","ir",errret); break;	\
+	case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
+	  default: __put_user_bad();					\
+	}								\
+} while (0)
+
+#else
+
+#define __put_user_size(x,ptr,size,retval,errret)			\
+do {									\
+	__typeof__(*(ptr)) __pus_tmp = x;				\
+	retval = 0;							\
+									\
+	if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0))	\
+		retval = errret;					\
+} while (0)
+
+#endif
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	__asm__ __volatile__(						\
+		"1:	mov"itype" %"rtype"1,%2\n"			\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:	movl %3,%0\n"					\
+		"	jmp 2b\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.align 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err)						\
+		: ltype (x), "m"(__m(addr)), "i"(errret), "0"(err))
+
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval,errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1: __get_user_asm(x,ptr,retval,"b","b","=q",errret);break;	\
+	case 2: __get_user_asm(x,ptr,retval,"w","w","=r",errret);break;	\
+	case 4: __get_user_asm(x,ptr,retval,"l","","=r",errret);break;	\
+	default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	__asm__ __volatile__(						\
+		"1:	mov"itype" %2,%"rtype"1\n"			\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:	movl %3,%0\n"					\
+		"	xor"itype" %"rtype"1,%"rtype"1\n"		\
+		"	jmp 2b\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.align 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err), ltype (x)					\
+		: "m"(__m(addr)), "i"(errret), "0"(err))
+
+
+unsigned long __must_check __copy_to_user_ll(void __user *to,
+				const void *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll(void *to,
+				const void __user *from, unsigned long n);
+
+/*
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the x86 will not write
+ * anything, so this is accurate.
+ */
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1);
+			return ret;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2);
+			return ret;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_to_user_ll(to, from, n);
+}
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_to_user_inatomic(to, from, n);
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll(to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_from_user_inatomic(to, from, n);
+}
+unsigned long __must_check copy_to_user(void __user *to,
+				const void *from, unsigned long n);
+unsigned long __must_check copy_from_user(void *to,
+				const void __user *from, unsigned long n);
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+				long count);
+long __must_check __strncpy_from_user(char *dst,
+				const char __user *src, long count);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+
+long strnlen_user(const char __user *str, long n);
+unsigned long __must_check clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
+
+#endif /* __i386_UACCESS_H */
diff --git a/include/asm-i386/ucontext.h b/include/asm-i386/ucontext.h
new file mode 100644
index 000000000000..b0db36925f55
--- /dev/null
+++ b/include/asm-i386/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASMi386_UCONTEXT_H
+#define _ASMi386_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASMi386_UCONTEXT_H */
diff --git a/include/asm-i386/unaligned.h b/include/asm-i386/unaligned.h
new file mode 100644
index 000000000000..7acd7957621e
--- /dev/null
+++ b/include/asm-i386/unaligned.h
@@ -0,0 +1,37 @@
+#ifndef __I386_UNALIGNED_H
+#define __I386_UNALIGNED_H
+
+/*
+ * The i386 can do unaligned accesses itself. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+/**
+ * get_unaligned - get value from possibly mis-aligned location
+ * @ptr: pointer to value
+ *
+ * This macro should be used for accessing values larger in size than 
+ * single bytes at locations that are expected to be improperly aligned, 
+ * e.g. retrieving a u16 value from a location not u16-aligned.
+ *
+ * Note that unaligned accesses can be very expensive on some architectures.
+ */
+#define get_unaligned(ptr) (*(ptr))
+
+/**
+ * put_unaligned - put value to a possibly mis-aligned location
+ * @val: value to place
+ * @ptr: pointer to location
+ *
+ * This macro should be used for placing values larger in size than 
+ * single bytes at locations that are expected to be improperly aligned, 
+ * e.g. writing a u16 value to a location not u16-aligned.
+ *
+ * Note that unaligned accesses can be very expensive on some architectures.
+ */
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
new file mode 100644
index 000000000000..61bcc1b1e3f4
--- /dev/null
+++ b/include/asm-i386/unistd.h
@@ -0,0 +1,466 @@
+#ifndef _ASM_I386_UNISTD_H_
+#define _ASM_I386_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_sys_kexec_load	283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+
+#define NR_syscalls 289
+
+/*
+ * user-visible error numbers are in the range -1 - -128: see
+ * <asm-i386/errno.h>
+ */
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-(128 + 1))) { \
+		errno = -(res); \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name)); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"b" ((long)(arg1))); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2))); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
+		  "d" ((long)(arg3))); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
+	  "d" ((long)(arg3)),"S" ((long)(arg4))); \
+__syscall_return(type,__res); \
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+__asm__ volatile ("int $0x80" \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
+	  "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5,type6,arg6) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \
+{ \
+long __res; \
+__asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; int $0x80 ; pop %%ebp" \
+	: "=a" (__res) \
+	: "i" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
+	  "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5)), \
+	  "0" ((long)(arg6))); \
+__syscall_return(type,__res); \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+
+asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount);
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(struct pt_regs regs);
+asmlinkage int sys_clone(struct pt_regs regs);
+asmlinkage int sys_fork(struct pt_regs regs);
+asmlinkage int sys_vfork(struct pt_regs regs);
+asmlinkage int sys_pipe(unsigned long __user *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+asmlinkage long sys_iopl(unsigned long unused);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* _ASM_I386_UNISTD_H_ */
diff --git a/include/asm-i386/user.h b/include/asm-i386/user.h
new file mode 100644
index 000000000000..0e85d2a5e33a
--- /dev/null
+++ b/include/asm-i386/user.h
@@ -0,0 +1,121 @@
+#ifndef _I386_USER_H
+#define _I386_USER_H
+
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ */
+
+struct user_i387_struct {
+	long	cwd;
+	long	swd;
+	long	twd;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+struct user_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;
+	unsigned short	fop;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	mxcsr;
+	long	reserved;
+	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	long	padding[56];
+};
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+struct user_regs_struct {
+	long ebx, ecx, edx, esi, edi, ebp, eax;
+	unsigned short ds, __ds, es, __es;
+	unsigned short fs, __fs, gs, __gs;
+	long orig_eax, eip;
+	unsigned short cs, __cs;
+	long eflags, esp;
+	unsigned short ss, __ss;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  struct user_pt_regs * u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct* u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _I386_USER_H */
diff --git a/include/asm-i386/vga.h b/include/asm-i386/vga.h
new file mode 100644
index 000000000000..ef0c0e50cc95
--- /dev/null
+++ b/include/asm-i386/vga.h
@@ -0,0 +1,20 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif
diff --git a/include/asm-i386/vic.h b/include/asm-i386/vic.h
new file mode 100644
index 000000000000..4abfcfb91eb8
--- /dev/null
+++ b/include/asm-i386/vic.h
@@ -0,0 +1,61 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * Standard include definitions for the NCR Voyager Interrupt Controller */
+
+/* The eight CPI vectors.  To activate a CPI, you write a bit mask
+ * corresponding to the processor set to be interrupted into the
+ * relevant register.  That set of CPUs will then be interrupted with
+ * the CPI */
+static const int VIC_CPI_Registers[] =
+	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
+	 0xFC10, 0xFC11, 0xFC18, 0xFC19 };
+
+#define VIC_PROC_WHO_AM_I		0xfc29
+#	define	QUAD_IDENTIFIER		0xC0
+#	define  EIGHT_SLOT_IDENTIFIER	0xE0
+#define QIC_EXTENDED_PROCESSOR_SELECT	0xFC72
+#define VIC_CPI_BASE_REGISTER		0xFC41
+#define VIC_PROCESSOR_ID		0xFC21
+#	define VIC_CPU_MASQUERADE_ENABLE 0x8
+
+#define VIC_CLAIM_REGISTER_0		0xFC38
+#define VIC_CLAIM_REGISTER_1		0xFC39
+#define VIC_REDIRECT_REGISTER_0		0xFC60
+#define VIC_REDIRECT_REGISTER_1		0xFC61
+#define VIC_PRIORITY_REGISTER		0xFC20
+
+#define VIC_PRIMARY_MC_BASE		0xFC48
+#define VIC_SECONDARY_MC_BASE		0xFC49
+
+#define QIC_PROCESSOR_ID		0xFC71
+#	define	QIC_CPUID_ENABLE	0x08
+
+#define QIC_VIC_CPI_BASE_REGISTER	0xFC79
+#define QIC_CPI_BASE_REGISTER		0xFC7A
+
+#define QIC_MASK_REGISTER0		0xFC80
+/* NOTE: these are masked high, enabled low */
+#	define QIC_PERF_TIMER		0x01
+#	define QIC_LPE			0x02
+#	define QIC_SYS_INT		0x04
+#	define QIC_CMN_INT		0x08
+/* at the moment, just enable CMN_INT, disable SYS_INT */
+#	define QIC_DEFAULT_MASK0	(~(QIC_CMN_INT /* | VIC_SYS_INT */))
+#define QIC_MASK_REGISTER1		0xFC81
+#	define QIC_BOOT_CPI_MASK	0xFE
+/* Enable CPI's 1-6 inclusive */
+#	define QIC_CPI_ENABLE		0x81
+
+#define QIC_INTERRUPT_CLEAR0		0xFC8A
+#define QIC_INTERRUPT_CLEAR1		0xFC8B
+
+/* this is where we place the CPI vectors */
+#define VIC_DEFAULT_CPI_BASE		0xC0
+/* this is where we place the QIC CPI vectors */
+#define QIC_DEFAULT_CPI_BASE		0xD0
+
+#define VIC_BOOT_INTERRUPT_MASK		0xfe
+
+extern void smp_vic_timer_interrupt(struct pt_regs *regs);
diff --git a/include/asm-i386/vm86.h b/include/asm-i386/vm86.h
new file mode 100644
index 000000000000..40ec82c6914d
--- /dev/null
+++ b/include/asm-i386/vm86.h
@@ -0,0 +1,208 @@
+#ifndef _LINUX_VM86_H
+#define _LINUX_VM86_H
+
+/*
+ * I'm guessing at the VIF/VIP flag usage, but hope that this is how
+ * the Pentium uses them. Linux will return from vm86 mode when both
+ * VIF and VIP is set.
+ *
+ * On a Pentium, we could probably optimize the virtual flags directly
+ * in the eflags register instead of doing it "by hand" in vflags...
+ *
+ * Linus
+ */
+
+#define TF_MASK		0x00000100
+#define IF_MASK		0x00000200
+#define IOPL_MASK	0x00003000
+#define NT_MASK		0x00004000
+#define VM_MASK		0x00020000
+#define AC_MASK		0x00040000
+#define VIF_MASK	0x00080000	/* virtual interrupt flag */
+#define VIP_MASK	0x00100000	/* virtual interrupt pending */
+#define ID_MASK		0x00200000
+
+#define BIOSSEG		0x0f000
+
+#define CPU_086		0
+#define CPU_186		1
+#define CPU_286		2
+#define CPU_386		3
+#define CPU_486		4
+#define CPU_586		5
+
+/*
+ * Return values for the 'vm86()' system call
+ */
+#define VM86_TYPE(retval)	((retval) & 0xff)
+#define VM86_ARG(retval)	((retval) >> 8)
+
+#define VM86_SIGNAL	0	/* return due to signal */
+#define VM86_UNKNOWN	1	/* unhandled GP fault - IO-instruction or similar */
+#define VM86_INTx	2	/* int3/int x instruction (ARG = x) */
+#define VM86_STI	3	/* sti/popf/iret instruction enabled virtual interrupts */
+
+/*
+ * Additional return values when invoking new vm86()
+ */
+#define VM86_PICRETURN	4	/* return due to pending PIC request */
+#define VM86_TRAP	6	/* return due to DOS-debugger request */
+
+/*
+ * function codes when invoking new vm86()
+ */
+#define VM86_PLUS_INSTALL_CHECK	0
+#define VM86_ENTER		1
+#define VM86_ENTER_NO_BYPASS	2
+#define	VM86_REQUEST_IRQ	3
+#define VM86_FREE_IRQ		4
+#define VM86_GET_IRQ_BITS	5
+#define VM86_GET_AND_RESET_IRQ	6
+
+/*
+ * This is the stack-layout seen by the user space program when we have
+ * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
+ * is 'kernel_vm86_regs' (see below).
+ */
+
+struct vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	long __null_ds;
+	long __null_es;
+	long __null_fs;
+	long __null_gs;
+	long orig_eax;
+	long eip;
+	unsigned short cs, __csh;
+	long eflags;
+	long esp;
+	unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct revectored_struct {
+	unsigned long __map[8];			/* 256 bits */
+};
+
+struct vm86_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+};
+
+/*
+ * flags masks
+ */
+#define VM86_SCREEN_BITMAP	0x0001
+
+struct vm86plus_info_struct {
+	unsigned long force_return_for_pic:1;
+	unsigned long vm86dbg_active:1;       /* for debugger */
+	unsigned long vm86dbg_TFpendig:1;     /* for debugger */
+	unsigned long unused:28;
+	unsigned long is_vm86pus:1;	      /* for vm86 internal use */
+	unsigned char vm86dbg_intxxtab[32];   /* for debugger */
+};
+
+struct vm86plus_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+};
+
+#ifdef __KERNEL__
+/*
+ * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
+ * mode - the main change is that the old segment descriptors aren't
+ * useful any more and are forced to be zero by the kernel (and the
+ * hardware when a trap occurs), and the real segment descriptors are
+ * at the end of the structure. Look at ptrace.h to see the "normal"
+ * setup. For user space layout see 'struct vm86_regs' above.
+ */
+
+struct kernel_vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	long __null_ds;
+	long __null_es;
+	long orig_eax;
+	long eip;
+	unsigned short cs, __csh;
+	long eflags;
+	long esp;
+	unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct kernel_vm86_struct {
+	struct kernel_vm86_regs regs;
+/*
+ * the below part remains on the kernel stack while we are in VM86 mode.
+ * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we
+ * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above
+ * 'struct kernel_vm86_regs' with the then actual values.
+ * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct'
+ * in kernelspace, hence we need not reget the data from userspace.
+ */
+#define VM86_TSS_ESP0 flags
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+	struct pt_regs *regs32;   /* here we save the pointer to the old regs */
+/*
+ * The below is not part of the structure, but the stack layout continues
+ * this way. In front of 'return-eip' may be some data, depending on
+ * compilation, so we don't rely on this and save the pointer to 'oldregs'
+ * in 'regs32' above.
+ * However, with GCC-2.7.2 and the current CFLAGS you see exactly this:
+
+	long return-eip;        from call to vm86()
+	struct pt_regs oldregs;  user space registers as saved by syscall
+ */
+};
+
+void handle_vm86_fault(struct kernel_vm86_regs *, long);
+int handle_vm86_trap(struct kernel_vm86_regs *, long, int);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-i386/voyager.h b/include/asm-i386/voyager.h
new file mode 100644
index 000000000000..aaf432dd7673
--- /dev/null
+++ b/include/asm-i386/voyager.h
@@ -0,0 +1,521 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * Standard include definitions for the NCR Voyager system */
+
+#undef	VOYAGER_DEBUG
+#undef	VOYAGER_CAT_DEBUG
+
+#ifdef VOYAGER_DEBUG
+#define VDEBUG(x)	printk x
+#else
+#define VDEBUG(x)
+#endif
+
+/* There are three levels of voyager machine: 3,4 and 5. The rule is
+ * if it's less than 3435 it's a Level 3 except for a 3360 which is
+ * a level 4.  A 3435 or above is a Level 5 */
+#define VOYAGER_LEVEL5_AND_ABOVE	0x3435
+#define VOYAGER_LEVEL4			0x3360
+
+/* The L4 DINO ASIC */
+#define VOYAGER_DINO			0x43
+
+/* voyager ports in standard I/O space */
+#define VOYAGER_MC_SETUP	0x96
+
+
+#define	VOYAGER_CAT_CONFIG_PORT			0x97
+#	define VOYAGER_CAT_DESELECT		0xff
+#define VOYAGER_SSPB_RELOCATION_PORT		0x98
+
+/* Valid CAT controller commands */
+/* start instruction register cycle */
+#define VOYAGER_CAT_IRCYC			0x01
+/* start data register cycle */
+#define VOYAGER_CAT_DRCYC			0x02
+/* move to execute state */
+#define VOYAGER_CAT_RUN				0x0F
+/* end operation */
+#define VOYAGER_CAT_END				0x80
+/* hold in idle state */
+#define VOYAGER_CAT_HOLD			0x90
+/* single step an "intest" vector */
+#define VOYAGER_CAT_STEP			0xE0
+/* return cat controller to CLEMSON mode */
+#define VOYAGER_CAT_CLEMSON			0xFF
+
+/* the default cat command header */
+#define VOYAGER_CAT_HEADER			0x7F
+
+/* the range of possible CAT module ids in the system */
+#define VOYAGER_MIN_MODULE			0x10
+#define VOYAGER_MAX_MODULE			0x1f
+
+/* The voyager registers per asic */
+#define VOYAGER_ASIC_ID_REG			0x00
+#define VOYAGER_ASIC_TYPE_REG			0x01
+/* the sub address registers can be made auto incrementing on reads */
+#define VOYAGER_AUTO_INC_REG			0x02
+#	define VOYAGER_AUTO_INC			0x04
+#	define VOYAGER_NO_AUTO_INC		0xfb
+#define VOYAGER_SUBADDRDATA			0x03
+#define VOYAGER_SCANPATH			0x05
+#	define VOYAGER_CONNECT_ASIC		0x01
+#	define VOYAGER_DISCONNECT_ASIC		0xfe
+#define VOYAGER_SUBADDRLO			0x06
+#define VOYAGER_SUBADDRHI			0x07
+#define VOYAGER_SUBMODSELECT			0x08
+#define VOYAGER_SUBMODPRESENT			0x09
+
+#define VOYAGER_SUBADDR_LO			0xff
+#define VOYAGER_SUBADDR_HI			0xffff
+
+/* the maximum size of a scan path -- used to form instructions */
+#define VOYAGER_MAX_SCAN_PATH			0x100
+/* the biggest possible register size (in bytes) */
+#define VOYAGER_MAX_REG_SIZE			4
+
+/* Total number of possible modules (including submodules) */
+#define VOYAGER_MAX_MODULES			16
+/* Largest number of asics per module */
+#define VOYAGER_MAX_ASICS_PER_MODULE		7
+
+/* the CAT asic of each module is always the first one */
+#define VOYAGER_CAT_ID				0
+#define VOYAGER_PSI				0x1a
+
+/* voyager instruction operations and registers */
+#define VOYAGER_READ_CONFIG			0x1
+#define VOYAGER_WRITE_CONFIG			0x2
+#define VOYAGER_BYPASS				0xff
+
+typedef struct voyager_asic 
+{
+	__u8	asic_addr;	/* ASIC address; Level 4 */
+	__u8	asic_type;      /* ASIC type */
+	__u8	asic_id;	/* ASIC id */
+	__u8	jtag_id[4];	/* JTAG id */
+	__u8	asic_location;	/* Location within scan path; start w/ 0 */
+	__u8	bit_location;	/* Location within bit stream; start w/ 0 */
+	__u8	ireg_length;	/* Instruction register length */
+	__u16	subaddr;	/* Amount of sub address space */
+	struct voyager_asic *next;	/* Next asic in linked list */
+} voyager_asic_t;
+
+typedef struct voyager_module {
+	__u8	module_addr;		/* Module address */
+	__u8	scan_path_connected;	/* Scan path connected */
+	__u16   ee_size;		/* Size of the EEPROM */
+	__u16   num_asics;		/* Number of Asics */
+	__u16   inst_bits;		/* Instruction bits in the scan path */
+	__u16   largest_reg;		/* Largest register in the scan path */
+	__u16   smallest_reg;		/* Smallest register in the scan path */
+	voyager_asic_t   *asic;		/* First ASIC in scan path (CAT_I) */
+	struct   voyager_module *submodule;	/* Submodule pointer */ 
+	struct   voyager_module *next;		/* Next module in linked list */
+} voyager_module_t;
+
+typedef struct voyager_eeprom_hdr {
+	 __u8  module_id[4] __attribute__((packed)); 
+	 __u8  version_id __attribute__((packed));
+	 __u8  config_id __attribute__((packed)); 
+	 __u16 boundry_id __attribute__((packed));	/* boundary scan id */
+	 __u16 ee_size __attribute__((packed));		/* size of EEPROM */
+	 __u8  assembly[11] __attribute__((packed));	/* assembly # */
+	 __u8  assembly_rev __attribute__((packed));	/* assembly rev */
+	 __u8  tracer[4] __attribute__((packed));	/* tracer number */
+	 __u16 assembly_cksum __attribute__((packed));	/* asm checksum */
+	 __u16 power_consump __attribute__((packed));	/* pwr requirements */
+	 __u16 num_asics __attribute__((packed));	/* number of asics */
+	 __u16 bist_time __attribute__((packed));	/* min. bist time */
+	 __u16 err_log_offset __attribute__((packed));	/* error log offset */
+	 __u16 scan_path_offset __attribute__((packed));/* scan path offset */
+	 __u16 cct_offset __attribute__((packed));
+	 __u16 log_length __attribute__((packed));	/* length of err log */
+	 __u16 xsum_end __attribute__((packed));	/* offset to end of
+							   checksum */
+	 __u8  reserved[4] __attribute__((packed));
+	 __u8  sflag __attribute__((packed));		/* starting sentinal */
+	 __u8  part_number[13] __attribute__((packed));	/* prom part number */
+	 __u8  version[10] __attribute__((packed));	/* version number */
+	 __u8  signature[8] __attribute__((packed));
+	 __u16 eeprom_chksum __attribute__((packed));
+	 __u32  data_stamp_offset __attribute__((packed));
+	 __u8  eflag  __attribute__((packed));		 /* ending sentinal */
+} voyager_eprom_hdr_t;
+
+
+
+#define VOYAGER_EPROM_SIZE_OFFSET   ((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
+#define VOYAGER_XSUM_END_OFFSET		0x2a
+
+/* the following three definitions are for internal table layouts
+ * in the module EPROMs.  We really only care about the IDs and
+ * offsets */
+typedef struct voyager_sp_table {
+	__u8 asic_id __attribute__((packed));
+	__u8 bypass_flag __attribute__((packed));
+	__u16 asic_data_offset __attribute__((packed));
+	__u16 config_data_offset __attribute__((packed));
+} voyager_sp_table_t;
+
+typedef struct voyager_jtag_table {
+	__u8 icode[4] __attribute__((packed));
+	__u8 runbist[4] __attribute__((packed));
+	__u8 intest[4] __attribute__((packed));
+	__u8 samp_preld[4] __attribute__((packed));
+	__u8 ireg_len __attribute__((packed));
+} voyager_jtt_t;
+
+typedef struct voyager_asic_data_table {
+	__u8 jtag_id[4] __attribute__((packed));
+	__u16 length_bsr __attribute__((packed));
+	__u16 length_bist_reg __attribute__((packed));
+	__u32 bist_clk __attribute__((packed));
+	__u16 subaddr_bits __attribute__((packed));
+	__u16 seed_bits __attribute__((packed));
+	__u16 sig_bits __attribute__((packed));
+	__u16 jtag_offset __attribute__((packed));
+} voyager_at_t;
+
+/* Voyager Interrupt Controller (VIC) registers */
+
+/* Base to add to Cross Processor Interrupts (CPIs) when triggering
+ * the CPU IRQ line */
+/* register defines for the WCBICs (one per processor) */
+#define VOYAGER_WCBIC0	0x41		/* bus A node P1 processor 0 */
+#define VOYAGER_WCBIC1	0x49		/* bus A node P1 processor 1 */
+#define VOYAGER_WCBIC2	0x51		/* bus A node P2 processor 0 */
+#define VOYAGER_WCBIC3	0x59		/* bus A node P2 processor 1 */
+#define VOYAGER_WCBIC4	0x61		/* bus B node P1 processor 0 */
+#define VOYAGER_WCBIC5	0x69		/* bus B node P1 processor 1 */
+#define VOYAGER_WCBIC6	0x71		/* bus B node P2 processor 0 */
+#define VOYAGER_WCBIC7	0x79		/* bus B node P2 processor 1 */
+
+
+/* top of memory registers */
+#define VOYAGER_WCBIC_TOM_L	0x4
+#define VOYAGER_WCBIC_TOM_H	0x5
+
+/* register defines for Voyager Memory Contol (VMC) 
+ * these are present on L4 machines only */
+#define	VOYAGER_VMC1		0x81
+#define VOYAGER_VMC2		0x91
+#define VOYAGER_VMC3		0xa1
+#define VOYAGER_VMC4		0xb1
+
+/* VMC Ports */
+#define VOYAGER_VMC_MEMORY_SETUP	0x9
+#	define VMC_Interleaving		0x01
+#	define VMC_4Way			0x02
+#	define VMC_EvenCacheLines	0x04
+#	define VMC_HighLine		0x08
+#	define VMC_Start0_Enable	0x20
+#	define VMC_Start1_Enable	0x40
+#	define VMC_Vremap		0x80
+#define VOYAGER_VMC_BANK_DENSITY	0xa
+#	define	VMC_BANK_EMPTY		0
+#	define	VMC_BANK_4MB		1
+#	define	VMC_BANK_16MB		2
+#	define	VMC_BANK_64MB		3
+#	define	VMC_BANK0_MASK		0x03
+#	define	VMC_BANK1_MASK		0x0C
+#	define	VMC_BANK2_MASK		0x30
+#	define	VMC_BANK3_MASK		0xC0
+
+/* Magellan Memory Controller (MMC) defines - present on L5 */
+#define VOYAGER_MMC_ASIC_ID		1
+/* the two memory modules corresponding to memory cards in the system */
+#define VOYAGER_MMC_MEMORY0_MODULE	0x14
+#define VOYAGER_MMC_MEMORY1_MODULE	0x15
+/* the Magellan Memory Address (MMA) defines */
+#define VOYAGER_MMA_ASIC_ID		2
+
+/* Submodule number for the Quad Baseboard */
+#define VOYAGER_QUAD_BASEBOARD		1
+
+/* ASIC defines for the Quad Baseboard */
+#define VOYAGER_QUAD_QDATA0		1
+#define VOYAGER_QUAD_QDATA1		2
+#define VOYAGER_QUAD_QABC		3
+
+/* Useful areas in extended CMOS */
+#define VOYAGER_PROCESSOR_PRESENT_MASK	0x88a
+#define VOYAGER_MEMORY_CLICKMAP		0xa23
+#define VOYAGER_DUMP_LOCATION		0xb1a
+
+/* SUS In Control bit - used to tell SUS that we don't need to be
+ * babysat anymore */
+#define VOYAGER_SUS_IN_CONTROL_PORT	0x3ff
+#	define VOYAGER_IN_CONTROL_FLAG	0x80
+
+/* Voyager PSI defines */
+#define VOYAGER_PSI_STATUS_REG		0x08
+#	define PSI_DC_FAIL		0x01
+#	define PSI_MON			0x02
+#	define PSI_FAULT		0x04
+#	define PSI_ALARM		0x08
+#	define PSI_CURRENT		0x10
+#	define PSI_DVM			0x20
+#	define PSI_PSCFAULT		0x40
+#	define PSI_STAT_CHG		0x80
+
+#define VOYAGER_PSI_SUPPLY_REG		0x8000
+	/* read */
+#	define PSI_FAIL_DC		0x01
+#	define PSI_FAIL_AC		0x02
+#	define PSI_MON_INT		0x04
+#	define PSI_SWITCH_OFF		0x08
+#	define PSI_HX_OFF		0x10
+#	define PSI_SECURITY		0x20
+#	define PSI_CMOS_BATT_LOW	0x40
+#	define PSI_CMOS_BATT_FAIL	0x80
+	/* write */
+#	define PSI_CLR_SWITCH_OFF	0x13
+#	define PSI_CLR_HX_OFF		0x14
+#	define PSI_CLR_CMOS_BATT_FAIL	0x17
+
+#define VOYAGER_PSI_MASK		0x8001
+#	define PSI_MASK_MASK		0x10
+
+#define VOYAGER_PSI_AC_FAIL_REG		0x8004
+#define	AC_FAIL_STAT_CHANGE		0x80
+
+#define VOYAGER_PSI_GENERAL_REG		0x8007
+	/* read */
+#	define PSI_SWITCH_ON		0x01
+#	define PSI_SWITCH_ENABLED	0x02
+#	define PSI_ALARM_ENABLED	0x08
+#	define PSI_SECURE_ENABLED	0x10
+#	define PSI_COLD_RESET		0x20
+#	define PSI_COLD_START		0x80
+	/* write */
+#	define PSI_POWER_DOWN		0x10
+#	define PSI_SWITCH_DISABLE	0x01
+#	define PSI_SWITCH_ENABLE	0x11
+#	define PSI_CLEAR		0x12
+#	define PSI_ALARM_DISABLE	0x03
+#	define PSI_ALARM_ENABLE		0x13
+#	define PSI_CLEAR_COLD_RESET	0x05
+#	define PSI_SET_COLD_RESET	0x15
+#	define PSI_CLEAR_COLD_START	0x07
+#	define PSI_SET_COLD_START	0x17
+
+
+
+struct voyager_bios_info {
+	__u8	len;
+	__u8	major;
+	__u8	minor;
+	__u8	debug;
+	__u8	num_classes;
+	__u8	class_1;
+	__u8	class_2;
+};
+
+/* The following structures and definitions are for the Kernel/SUS
+ * interface these are needed to find out how SUS initialised any Quad
+ * boards in the system */
+
+#define	NUMBER_OF_MC_BUSSES	2
+#define SLOTS_PER_MC_BUS	8
+#define MAX_CPUS                16      /* 16 way CPU system */
+#define MAX_PROCESSOR_BOARDS	4	/* 4 processor slot system */
+#define MAX_CACHE_LEVELS	4	/* # of cache levels supported */
+#define MAX_SHARED_CPUS		4	/* # of CPUs that can share a LARC */
+#define NUMBER_OF_POS_REGS	8
+
+typedef struct {
+	__u8	MC_Slot __attribute__((packed));
+	__u8	POS_Values[NUMBER_OF_POS_REGS] __attribute__((packed));
+} MC_SlotInformation_t;
+
+struct QuadDescription {
+	__u8  Type __attribute__((packed));	/* for type 0 (DYADIC or MONADIC) all fields
+                         * will be zero except for slot */
+	__u8 StructureVersion __attribute__((packed));
+	__u32 CPI_BaseAddress __attribute__((packed));
+	__u32  LARC_BankSize __attribute__((packed));	
+	__u32 LocalMemoryStateBits __attribute__((packed));
+	__u8  Slot __attribute__((packed)); /* Processor slots 1 - 4 */
+}; 
+
+struct ProcBoardInfo { 
+	__u8 Type __attribute__((packed));    
+	__u8 StructureVersion __attribute__((packed));
+	__u8 NumberOfBoards __attribute__((packed));
+	struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS] __attribute__((packed));
+};
+
+struct CacheDescription {
+	__u8 Level __attribute__((packed));
+	__u32 TotalSize __attribute__((packed));
+	__u16 LineSize __attribute__((packed));
+	__u8  Associativity __attribute__((packed));
+	__u8  CacheType __attribute__((packed));
+	__u8  WriteType __attribute__((packed));
+	__u8  Number_CPUs_SharedBy __attribute__((packed));
+	__u8  Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS] __attribute__((packed));
+
+};
+
+struct CPU_Description {
+	__u8 CPU_HardwareId __attribute__((packed));
+	char *FRU_String __attribute__((packed));
+	__u8 NumberOfCacheLevels __attribute__((packed));
+	struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS] __attribute__((packed));
+};
+
+struct CPU_Info {
+	__u8 Type __attribute__((packed));
+	__u8 StructureVersion __attribute__((packed));
+	__u8 NumberOf_CPUs __attribute__((packed));
+	struct CPU_Description CPU_Data[MAX_CPUS] __attribute__((packed));
+};
+
+
+/*
+ * This structure will be used by SUS and the OS.
+ * The assumption about this structure is that no blank space is
+ * packed in it by our friend the compiler.
+ */
+typedef struct {
+	__u8	Mailbox_SUS;		/* Written to by SUS to give commands/response to the OS */
+	__u8	Mailbox_OS;		/* Written to by the OS to give commands/response to SUS */
+	__u8	SUS_MailboxVersion;	/* Tells the OS which iteration of the interface SUS supports */
+	__u8	OS_MailboxVersion;	/* Tells SUS which iteration of the interface the OS supports */
+	__u32	OS_Flags;		/* Flags set by the OS as info for SUS */
+	__u32	SUS_Flags;		/* Flags set by SUS as info for the OS */
+	__u32	WatchDogPeriod;		/* Watchdog period (in seconds) which the DP uses to see if the OS is dead */
+	__u32	WatchDogCount;		/* Updated by the OS on every tic. */
+	__u32	MemoryFor_SUS_ErrorLog;	/* Flat 32 bit address which tells SUS where to stuff the SUS error log on a dump */
+	MC_SlotInformation_t  MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];	/* Storage for MCA POS data */
+	/* All new SECOND_PASS_INTERFACE fields added from this point */
+        struct ProcBoardInfo    *BoardData;
+        struct CPU_Info         *CPU_Data;
+	/* All new fields must be added from this point */
+} Voyager_KernelSUS_Mbox_t;
+
+/* structure for finding the right memory address to send a QIC CPI to */
+struct voyager_qic_cpi {
+	/* Each cache line (32 bytes) can trigger a cpi.  The cpi
+	 * read/write may occur anywhere in the cache line---pick the
+	 * middle to be safe */
+	struct  {
+		__u32 pad1[3];
+		__u32 cpi;
+		__u32 pad2[4];
+	} qic_cpi[8];
+};
+
+struct voyager_status {
+	__u32	power_fail:1;
+	__u32	switch_off:1;
+	__u32	request_from_kernel:1;
+};
+
+struct voyager_psi_regs {
+	__u8 cat_id;
+	__u8 cat_dev;
+	__u8 cat_control;
+	__u8 subaddr;
+	__u8 dummy4;
+	__u8 checkbit;
+	__u8 subaddr_low;
+	__u8 subaddr_high;
+	__u8 intstatus;
+	__u8 stat1;
+	__u8 stat3;
+	__u8 fault;
+	__u8 tms;
+	__u8 gen;
+	__u8 sysconf;
+	__u8 dummy15;
+};
+
+struct voyager_psi_subregs {
+	__u8 supply;
+	__u8 mask;
+	__u8 present;
+	__u8 DCfail;
+	__u8 ACfail;
+	__u8 fail;
+	__u8 UPSfail;
+	__u8 genstatus;
+};
+
+struct voyager_psi {
+	struct voyager_psi_regs regs;
+	struct voyager_psi_subregs subregs;
+};
+
+struct voyager_SUS {
+#define	VOYAGER_DUMP_BUTTON_NMI		0x1
+#define VOYAGER_SUS_VALID		0x2
+#define VOYAGER_SYSINT_COMPLETE		0x3
+	__u8	SUS_mbox;
+#define VOYAGER_NO_COMMAND		0x0
+#define VOYAGER_IGNORE_DUMP		0x1
+#define VOYAGER_DO_DUMP			0x2
+#define VOYAGER_SYSINT_HANDSHAKE	0x3
+#define VOYAGER_DO_MEM_DUMP		0x4
+#define VOYAGER_SYSINT_WAS_RECOVERED	0x5
+	__u8	kernel_mbox;
+#define	VOYAGER_MAILBOX_VERSION		0x10
+	__u8	SUS_version;
+	__u8	kernel_version;
+#define VOYAGER_OS_HAS_SYSINT		0x1
+#define VOYAGER_OS_IN_PROGRESS		0x2
+#define VOYAGER_UPDATING_WDPERIOD	0x4
+	__u32	kernel_flags;
+#define VOYAGER_SUS_BOOTING		0x1
+#define VOYAGER_SUS_IN_PROGRESS		0x2
+	__u32	SUS_flags;
+	__u32	watchdog_period;
+	__u32	watchdog_count;
+	__u32	SUS_errorlog;
+	/* lots of system configuration stuff under here */
+};
+	
+/* Variables exported by voyager_smp */
+extern __u32 voyager_extended_vic_processors;
+extern __u32 voyager_allowed_boot_processors;
+extern __u32 voyager_quad_processors;
+extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS];
+extern struct voyager_SUS *voyager_SUS;
+
+/* variables exported always */
+extern int voyager_level;
+extern int kvoyagerd_running;
+extern struct semaphore kvoyagerd_sem;
+extern struct voyager_status voyager_status;
+
+
+
+/* functions exported by the voyager and voyager_smp modules */
+
+extern int voyager_cat_readb(__u8 module, __u8 asic, int reg);
+extern void voyager_cat_init(void);
+extern void voyager_detect(struct voyager_bios_info *);
+extern void voyager_trap_init(void);
+extern void voyager_setup_irqs(void);
+extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length);
+extern void voyager_smp_intr_init(void);
+extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
+extern void voyager_smp_dump(void);
+extern void voyager_timer_interrupt(struct pt_regs *regs);
+extern void smp_local_timer_interrupt(struct pt_regs * regs);
+extern void voyager_power_off(void);
+extern void smp_voyager_power_off(void *dummy);
+extern void voyager_restart(void);
+extern void voyager_cat_power_off(void);
+extern void voyager_cat_do_common_interrupt(void);
+extern void voyager_handle_nmi(void);
+/* Commands for the following are */
+#define	VOYAGER_PSI_READ	0
+#define VOYAGER_PSI_WRITE	1
+#define VOYAGER_PSI_SUBREAD	2
+#define VOYAGER_PSI_SUBWRITE	3
+extern void voyager_cat_psi(__u8, __u16, __u8 *);
diff --git a/include/asm-i386/xor.h b/include/asm-i386/xor.h
new file mode 100644
index 000000000000..f80e2dbe1b56
--- /dev/null
+++ b/include/asm-i386/xor.h
@@ -0,0 +1,883 @@
+/*
+ * include/asm-i386/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High-speed RAID5 checksumming functions utilizing MMX instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+#define LD(x,y)		"       movq   8*("#x")(%1), %%mm"#y"   ;\n"
+#define ST(x,y)		"       movq %%mm"#y",   8*("#x")(%1)   ;\n"
+#define XO1(x,y)	"       pxor   8*("#x")(%2), %%mm"#y"   ;\n"
+#define XO2(x,y)	"       pxor   8*("#x")(%3), %%mm"#y"   ;\n"
+#define XO3(x,y)	"       pxor   8*("#x")(%4), %%mm"#y"   ;\n"
+#define XO4(x,y)	"       pxor   8*("#x")(%5), %%mm"#y"   ;\n"
+
+#include <asm/i387.h>
+
+static void
+xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+	LD(i,0)					\
+		LD(i+1,1)			\
+			LD(i+2,2)		\
+				LD(i+3,3)	\
+	XO1(i,0)				\
+	ST(i,0)					\
+		XO1(i+1,1)			\
+		ST(i+1,1)			\
+			XO1(i+2,2)		\
+			ST(i+2,2)		\
+				XO1(i+3,3)	\
+				ST(i+3,3)
+
+	" .align 32			;\n"
+  	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+	LD(i,0)					\
+		LD(i+1,1)			\
+			LD(i+2,2)		\
+				LD(i+3,3)	\
+	XO1(i,0)				\
+		XO1(i+1,1)			\
+			XO1(i+2,2)		\
+				XO1(i+3,3)	\
+	XO2(i,0)				\
+	ST(i,0)					\
+		XO2(i+1,1)			\
+		ST(i+1,1)			\
+			XO2(i+2,2)		\
+			ST(i+2,2)		\
+				XO2(i+3,3)	\
+				ST(i+3,3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+	LD(i,0)					\
+		LD(i+1,1)			\
+			LD(i+2,2)		\
+				LD(i+3,3)	\
+	XO1(i,0)				\
+		XO1(i+1,1)			\
+			XO1(i+2,2)		\
+				XO1(i+3,3)	\
+	XO2(i,0)				\
+		XO2(i+1,1)			\
+			XO2(i+2,2)		\
+				XO2(i+3,3)	\
+	XO3(i,0)				\
+	ST(i,0)					\
+		XO3(i+1,1)			\
+		ST(i+1,1)			\
+			XO3(i+2,2)		\
+			ST(i+2,2)		\
+				XO3(i+3,3)	\
+				ST(i+3,3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+
+static void
+xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	__asm__ ("" : "+r" (p4), "+r" (p5));
+
+	__asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+	LD(i,0)					\
+		LD(i+1,1)			\
+			LD(i+2,2)		\
+				LD(i+3,3)	\
+	XO1(i,0)				\
+		XO1(i+1,1)			\
+			XO1(i+2,2)		\
+				XO1(i+3,3)	\
+	XO2(i,0)				\
+		XO2(i+1,1)			\
+			XO2(i+2,2)		\
+				XO2(i+3,3)	\
+	XO3(i,0)				\
+		XO3(i+1,1)			\
+			XO3(i+2,2)		\
+				XO3(i+3,3)	\
+	XO4(i,0)				\
+	ST(i,0)					\
+		XO4(i+1,1)			\
+		ST(i+1,1)			\
+			XO4(i+2,2)		\
+			ST(i+2,2)		\
+				XO4(i+3,3)	\
+				ST(i+3,3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       addl $128, %5         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5) 
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	__asm__ ("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+#undef LD
+#undef XO1
+#undef XO2
+#undef XO3
+#undef XO4
+#undef ST
+#undef BLOCK
+
+static void
+xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+	" .align 32	             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+	
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+      
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory" );
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	__asm__ __volatile__ (
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+      
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	__asm__ ("" : "+r" (p4), "+r" (p5));
+
+	__asm__ __volatile__ (
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor   (%5), %%mm0   ;\n"
+	"       pxor  8(%5), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%5), %%mm2   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%5), %%mm3   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 32(%5), %%mm4   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       pxor 40(%5), %%mm5   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%5), %%mm6   ;\n"
+	"       pxor 56(%5), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+      
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       addl $64, %5         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	__asm__ ("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+static struct xor_block_template xor_block_pII_mmx = {
+	.name = "pII_mmx",
+	.do_2 = xor_pII_mmx_2,
+	.do_3 = xor_pII_mmx_3,
+	.do_4 = xor_pII_mmx_4,
+	.do_5 = xor_pII_mmx_5,
+};
+
+static struct xor_block_template xor_block_p5_mmx = {
+	.name = "p5_mmx",
+	.do_2 = xor_p5_mmx_2,
+	.do_3 = xor_p5_mmx_3,
+	.do_4 = xor_p5_mmx_4,
+	.do_5 = xor_p5_mmx_5,
+};
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+#define XMMS_SAVE do {				\
+	preempt_disable();			\
+	__asm__ __volatile__ ( 			\
+		"movl %%cr0,%0		;\n\t"	\
+		"clts			;\n\t"	\
+		"movups %%xmm0,(%1)	;\n\t"	\
+		"movups %%xmm1,0x10(%1)	;\n\t"	\
+		"movups %%xmm2,0x20(%1)	;\n\t"	\
+		"movups %%xmm3,0x30(%1)	;\n\t"	\
+		: "=&r" (cr0)			\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while(0)
+
+#define XMMS_RESTORE do {			\
+	__asm__ __volatile__ ( 			\
+		"sfence			;\n\t"	\
+		"movups (%1),%%xmm0	;\n\t"	\
+		"movups 0x10(%1),%%xmm1	;\n\t"	\
+		"movups 0x20(%1),%%xmm2	;\n\t"	\
+		"movups 0x30(%1),%%xmm3	;\n\t"	\
+		"movl 	%0,%%cr0	;\n\t"	\
+		:				\
+		: "r" (cr0), "r" (xmm_save)	\
+		: "memory");			\
+	preempt_enable();			\
+} while(0)
+
+#define ALIGN16 __attribute__((aligned(16)))
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%1)		;\n"
+#define LD(x,y)		"       movaps   "OFFS(x)"(%1), %%xmm"#y"	;\n"
+#define ST(x,y)		"       movaps %%xmm"#y",   "OFFS(x)"(%1)	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%2)		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%3)		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%4)		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%5)		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%6)		;\n"
+#define XO1(x,y)	"       xorps   "OFFS(x)"(%2), %%xmm"#y"	;\n"
+#define XO2(x,y)	"       xorps   "OFFS(x)"(%3), %%xmm"#y"	;\n"
+#define XO3(x,y)	"       xorps   "OFFS(x)"(%4), %%xmm"#y"	;\n"
+#define XO4(x,y)	"       xorps   "OFFS(x)"(%5), %%xmm"#y"	;\n"
+#define XO5(x,y)	"       xorps   "OFFS(x)"(%6), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+        unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		LD(i,0)					\
+			LD(i+1,1)			\
+		PF1(i)					\
+				PF1(i+2)		\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addl $256, %1           ;\n"
+        "       addl $256, %2           ;\n"
+        "       decl %0                 ;\n"
+        "       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+        : "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+        unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addl $256, %1           ;\n"
+        "       addl $256, %2           ;\n"
+        "       addl $256, %3           ;\n"
+        "       decl %0                 ;\n"
+        "       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r"(p2), "+r"(p3)
+	:
+        : "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+        unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		PF3(i)					\
+				PF3(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		XO3(i,0)				\
+			XO3(i+1,1)			\
+				XO3(i+2,2)		\
+					XO3(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addl $256, %1           ;\n"
+        "       addl $256, %2           ;\n"
+        "       addl $256, %3           ;\n"
+        "       addl $256, %4           ;\n"
+        "       decl %0                 ;\n"
+        "       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+        : "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+        unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	__asm__ ("" : "+r" (p4), "+r" (p5));
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		PF3(i)					\
+				PF3(i+2)		\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		PF4(i)					\
+				PF4(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO3(i,0)				\
+			XO3(i+1,1)			\
+				XO3(i+2,2)		\
+					XO3(i+3,3)	\
+		XO4(i,0)				\
+			XO4(i+1,1)			\
+				XO4(i+2,2)		\
+					XO4(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addl $256, %1           ;\n"
+        "       addl $256, %2           ;\n"
+        "       addl $256, %3           ;\n"
+        "       addl $256, %4           ;\n"
+        "       addl $256, %5           ;\n"
+        "       decl %0                 ;\n"
+        "       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	__asm__ ("" : "=r" (p4), "=r" (p5));
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_pIII_sse = {
+        .name = "pIII_sse",
+        .do_2 =  xor_sse_2,
+        .do_3 =  xor_sse_3,
+        .do_4 =  xor_sse_4,
+        .do_5 = xor_sse_5,
+};
+
+/* Also try the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_8regs_p);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_32regs_p);		\
+	        if (cpu_has_xmm)			\
+			xor_speed(&xor_block_pIII_sse);	\
+	        if (cpu_has_mmx) {			\
+	                xor_speed(&xor_block_pII_mmx);	\
+	                xor_speed(&xor_block_p5_mmx);	\
+	        }					\
+	} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h
new file mode 100644
index 000000000000..7293ac1df3ab
--- /dev/null
+++ b/include/asm-ia64/a.out.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_A_OUT_H
+#define _ASM_IA64_A_OUT_H
+
+/*
+ * No a.out format has been (or should be) defined so this file is
+ * just a dummy that allows us to get binfmt_elf compiled.  It
+ * probably would be better to clean up binfmt_elf.c so it does not
+ * necessarily depend on there being a.out support.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <linux/types.h>
+
+struct exec {
+	unsigned long a_info;
+	unsigned long a_text;
+	unsigned long a_data;
+	unsigned long a_bss;
+	unsigned long a_entry;
+};
+
+#define N_TXTADDR(x)	0
+#define N_DATADDR(x)	0
+#define N_BSSADDR(x)	0
+#define N_DRSIZE(x)	0
+#define N_TRSIZE(x)	0
+#define N_SYMSIZE(x)	0
+#define N_TXTOFF(x)	0
+
+#ifdef __KERNEL__
+#include <asm/ustack.h>
+#endif
+#endif /* _ASM_IA64_A_OUT_H */
diff --git a/include/asm-ia64/acpi-ext.h b/include/asm-ia64/acpi-ext.h
new file mode 100644
index 000000000000..9271d74c64cc
--- /dev/null
+++ b/include/asm-ia64/acpi-ext.h
@@ -0,0 +1,17 @@
+/*
+ * ia64/platform/hp/common/hp_acpi.h
+ *
+ * Copyright (C) 2003 Hewlett-Packard
+ * Copyright (C) Alex Williamson
+ * Copyright (C) Bjorn Helgaas
+ *
+ * Vendor specific extensions to ACPI.
+ */
+#ifndef _ASM_IA64_ACPI_EXT_H
+#define _ASM_IA64_ACPI_EXT_H
+
+#include <linux/types.h>
+
+extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
+
+#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
new file mode 100644
index 000000000000..6a26a977f253
--- /dev/null
+++ b/include/asm-ia64/acpi.h
@@ -0,0 +1,112 @@
+/*
+ *  asm-ia64/acpi.h
+ *
+ *  Copyright (C) 1999 VA Linux Systems
+ *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ *  Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <asm/system.h>
+
+#define COMPILER_DEPENDENT_INT64	long
+#define COMPILER_DEPENDENT_UINT64	unsigned long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()
+
+static inline int
+ia64_acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+ia64_acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq)				\
+	((Acq) = ia64_acpi_acquire_global_lock((unsigned int *) GLptr))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq)				\
+	((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
+
+#define acpi_disabled 0	/* ACPI always enabled on IA64 */
+#define acpi_noirq 0	/* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
+#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+static inline void disable_acpi(void) { }
+
+const char *acpi_get_sysname (void);
+int acpi_request_vector (u32 int_type);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+#ifdef CONFIG_ACPI_NUMA
+/* Proximity bitmap length; _PXM is at most 255 (8 bit)*/
+#define MAX_PXM_DOMAINS (256)
+extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
+#endif
+
+extern u16 ia64_acpiid_to_sapicid[];
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h
new file mode 100644
index 000000000000..d1316f1e6ee1
--- /dev/null
+++ b/include/asm-ia64/agp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_AGP_H
+#define _ASM_IA64_AGP_H
+
+/*
+ * IA-64 specific AGP definitions.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
+ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
+ * (unlike x86, where it gets mapped "write-coalescing").
+ */
+#define map_page_into_agp(page)		/* nothing */
+#define unmap_page_from_agp(page)	/* nothing */
+#define flush_agp_mappings()		/* nothing */
+#define flush_agp_cache()		mb()
+
+#endif /* _ASM_IA64_AGP_H */
diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h
new file mode 100644
index 000000000000..77af457f4ad7
--- /dev/null
+++ b/include/asm-ia64/asmmacro.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_IA64_ASMMACRO_H
+#define _ASM_IA64_ASMMACRO_H
+
+/*
+ * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#define ENTRY(name)				\
+	.align 32;				\
+	.proc name;				\
+name:
+
+#define ENTRY_MIN_ALIGN(name)			\
+	.align 16;				\
+	.proc name;				\
+name:
+
+#define GLOBAL_ENTRY(name)			\
+	.global name;				\
+	ENTRY(name)
+
+#define END(name)				\
+	.endp name
+
+/*
+ * Helper macros to make unwind directives more readable:
+ */
+
+/* prologue_gr: */
+#define ASM_UNW_PRLG_RP			0x8
+#define ASM_UNW_PRLG_PFS		0x4
+#define ASM_UNW_PRLG_PSP		0x2
+#define ASM_UNW_PRLG_PR			0x1
+#define ASM_UNW_PRLG_GRSAVE(ninputs)	(32+(ninputs))
+
+/*
+ * Helper macros for accessing user memory.
+ */
+
+	.section "__ex_table", "a"		// declare section & section attributes
+	.previous
+
+# define EX(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.;	\
+  [99:]	x
+# define EXCLR(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.+4;	\
+  [99:]	x
+
+/*
+ * Mark instructions that need a load of a virtual address patched to be
+ * a load of a physical address.  We use this either in critical performance
+ * path (ivt.S - TLB miss processing) or in places where it might not be
+ * safe to use a "tpa" instruction (mca_asm.S - error recovery).
+ */
+	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.previous
+
+#define	LOAD_PHYSICAL(pr, reg, obj)		\
+[1:](pr)movl reg = obj;				\
+	.xdata4 ".data.patch.vtop", 1b-.
+
+/*
+ * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
+ * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
+ */
+#define DO_MCKINLEY_E9_WORKAROUND
+
+#ifdef DO_MCKINLEY_E9_WORKAROUND
+	.section ".data.patch.mckinley_e9", "a"
+	.previous
+/* workaround for Itanium 2 Errata 9: */
+# define FSYS_RETURN					\
+	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+1:{ .mib;						\
+	nop.m 0;					\
+	mov r16=ar.pfs;					\
+	br.call.sptk.many b7=2f;;			\
+  };							\
+2:{ .mib;						\
+	nop.m 0;					\
+	mov ar.pfs=r16;					\
+	br.ret.sptk.many b6;;				\
+  }
+#else
+# define FSYS_RETURN	br.ret.sptk.many b6
+#endif
+
+/*
+ * Up until early 2004, use of .align within a function caused bad unwind info.
+ * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
+ * otherwise.
+ */
+#ifdef HAVE_WORKING_TEXT_ALIGN
+# define TEXT_ALIGN(n)	.align n
+#else
+# define TEXT_ALIGN(n)
+#endif
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define dv_serialize_data		.serialize.data
+# define dv_serialize_instruction	.serialize.instruction
+#else
+# define dv_serialize_data
+# define dv_serialize_instruction
+#endif
+
+#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h
new file mode 100644
index 000000000000..874a6f890e75
--- /dev/null
+++ b/include/asm-ia64/atomic.h
@@ -0,0 +1,183 @@
+#ifndef _ASM_IA64_ATOMIC_H
+#define _ASM_IA64_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * NOTE: don't mess with the types below!  The "unsigned long" and
+ * "int" types were carefully placed so as to ensure proper operation
+ * of the macros.
+ *
+ * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/types.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * On IA-64, counter must always be volatile to ensure that that the
+ * memory accesses are ordered.
+ */
+typedef struct { volatile __s32 counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		((atomic_t) { (i) })
+#define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v,i)		(((v)->counter) = (i))
+#define atomic64_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ int
+ia64_atomic_add (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_add (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic_sub (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_sub (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+#define atomic_add_return(i,v)						\
+({									\
+	int __ia64_aar_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic_add(__ia64_aar_i, v);			\
+})
+
+#define atomic64_add_return(i,v)					\
+({									\
+	long __ia64_aar_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic64_add(__ia64_aar_i, v);			\
+})
+
+/*
+ * Atomically add I to V and return TRUE if the resulting value is
+ * negative.
+ */
+static __inline__ int
+atomic_add_negative (int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static __inline__ int
+atomic64_add_negative (__s64 i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+#define atomic_sub_return(i,v)						\
+({									\
+	int __ia64_asr_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic64_sub_return(i,v)					\
+({									\
+	long __ia64_asr_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic64_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_sub_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_add_return(1, (v)) == 0)
+
+#define atomic_add(i,v)			atomic_add_return((i), (v))
+#define atomic_sub(i,v)			atomic_sub_return((i), (v))
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+#define atomic64_add(i,v)		atomic64_add_return((i), (v))
+#define atomic64_sub(i,v)		atomic64_sub_return((i), (v))
+#define atomic64_inc(v)			atomic64_add(1, (v))
+#define atomic64_dec(v)			atomic64_sub(1, (v))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h
new file mode 100644
index 000000000000..925d54cee475
--- /dev/null
+++ b/include/asm-ia64/bitops.h
@@ -0,0 +1,410 @@
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 O(1)
+ *	    scheduler patch
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to operate on
+ * hw-defined data-structures, so we can't easily change these operations to force a
+ * bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__set_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/*
+ * clear_bit() has "acquire" semantics.
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	do { /* skip */; } while (0)
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory (non-atomic version)
+ */
+static __inline__ void
+__clear_bit (int nr, volatile void *addr)
+{
+	volatile __u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	*p &= ~m;
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__change_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p |= m;
+	return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & ~mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = *p & m;
+
+	*p &= ~m;
+	return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ int
+__test_and_change_bit (int nr, void *addr)
+{
+	__u32 old, bit = (1 << (nr & 31));
+	__u32 *m = (__u32 *) addr + (nr >> 5);
+
+	old = *m;
+	*m = old ^ bit;
+	return (old & bit) != 0;
+}
+
+static __inline__ int
+test_bit (int nr, const volatile void *addr)
+{
+	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.  Undefined if
+ * no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt(x & (~x - 1));
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt((x-1) & ~x);
+	return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * find_last_zero_bit - find the last zero bit in a 64 bit quantity
+ * @x: The value to search
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+	long double d = x;
+	long exp;
+
+	exp = ia64_getf_exp(d);
+	return exp - 0xffff;
+}
+
+static inline int
+fls (int x)
+{
+	return ia64_fls((unsigned int) x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as the libc and compiler builtin
+ * ffs routines, therefore differs in spirit from the above ffz (man ffs): it operates on
+ * "int" values only and the result value is the bit number + 1.  ffs(0) is defined to
+ * return zero.
+ */
+#define ffs(x)	__builtin_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long
+hweight64 (unsigned long x)
+{
+	unsigned long result;
+	result = ia64_popcnt(x);
+	return result;
+}
+
+#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+
+#endif /* __KERNEL__ */
+
+extern int __find_next_zero_bit (const void *addr, unsigned long size,
+			unsigned long offset);
+extern int __find_next_bit(const void *addr, unsigned long size,
+			unsigned long offset);
+
+#define find_next_zero_bit(addr, size, offset) \
+			__find_next_zero_bit((addr), (size), (offset))
+#define find_next_bit(addr, size, offset) \
+			__find_next_bit((addr), (size), (offset))
+
+/*
+ * The optimizer actually does good code for this case..
+ */
+#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
+
+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+
+#ifdef __KERNEL__
+
+#define __clear_bit(nr, addr)		clear_bit(nr, addr)
+
+#define ext2_set_bit			test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
+#define ext2_clear_bit			test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)		test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)			set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr)			test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
+
+static inline int
+sched_find_first_bit (unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return 64 + __ffs(b[1]);
+	return __ffs(b[2]) + 128;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */
diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h
new file mode 100644
index 000000000000..97c7b2d79600
--- /dev/null
+++ b/include/asm-ia64/break.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_BREAK_H
+#define _ASM_IA64_BREAK_H
+
+/*
+ * IA-64 Linux break numbers.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * OS-specific debug break numbers:
+ */
+#define __IA64_BREAK_KDB		0x80100
+
+/*
+ * OS-specific break numbers:
+ */
+#define __IA64_BREAK_SYSCALL		0x100000
+
+#endif /* _ASM_IA64_BREAK_H */
diff --git a/include/asm-ia64/bug.h b/include/asm-ia64/bug.h
new file mode 100644
index 000000000000..2c0cd51e8856
--- /dev/null
+++ b/include/asm-ia64/bug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_IA64_BUG_H
+#define _ASM_IA64_BUG_H
+
+#if (__GNUC__ > 3) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)
+# define ia64_abort()	__builtin_trap()
+#else
+# define ia64_abort()	(*(volatile int *) 0 = 0)
+#endif
+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+
+/* should this BUG should be made generic? */
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ia64/bugs.h b/include/asm-ia64/bugs.h
new file mode 100644
index 000000000000..433523e3b2ed
--- /dev/null
+++ b/include/asm-ia64/bugs.h
@@ -0,0 +1,19 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ *
+ * Based on <asm-alpha/bugs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
+ */
+#ifndef _ASM_IA64_BUGS_H
+#define _ASM_IA64_BUGS_H
+
+#include <asm/processor.h>
+
+extern void check_bugs (void);
+
+#endif /* _ASM_IA64_BUGS_H */
diff --git a/include/asm-ia64/byteorder.h b/include/asm-ia64/byteorder.h
new file mode 100644
index 000000000000..69bd41d7c26e
--- /dev/null
+++ b/include/asm-ia64/byteorder.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_BYTEORDER_H
+#define _ASM_IA64_BYTEORDER_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <asm/types.h>
+#include <asm/intrinsics.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u64
+__ia64_swab64 (__u64 x)
+{
+	__u64 result;
+
+	result = ia64_mux1(x, ia64_mux1_rev);
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32
+__ia64_swab32 (__u32 x)
+{
+	return __ia64_swab64(x) >> 32;
+}
+
+static __inline__ __attribute_const__ __u16
+__ia64_swab16(__u16 x)
+{
+	return __ia64_swab64(x) >> 48;
+}
+
+#define __arch__swab64(x) __ia64_swab64(x)
+#define __arch__swab32(x) __ia64_swab32(x)
+#define __arch__swab16(x) __ia64_swab16(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/include/asm-ia64/cache.h b/include/asm-ia64/cache.h
new file mode 100644
index 000000000000..666d8f175cb3
--- /dev/null
+++ b/include/asm-ia64/cache.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_CACHE_H
+#define _ASM_IA64_CACHE_H
+
+#include <linux/config.h>
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/* Bytes per L1 (data) cache line.  */
+#define L1_CACHE_SHIFT		CONFIG_IA64_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#ifdef CONFIG_SMP
+# define SMP_CACHE_SHIFT	L1_CACHE_SHIFT
+# define SMP_CACHE_BYTES	L1_CACHE_BYTES
+#else
+  /*
+   * The "aligned" directive can only _increase_ alignment, so this is
+   * safe and provides an easy way to avoid wasting space on a
+   * uni-processor:
+   */
+# define SMP_CACHE_SHIFT	3
+# define SMP_CACHE_BYTES	(1 << 3)
+#endif
+
+#endif /* _ASM_IA64_CACHE_H */
diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h
new file mode 100644
index 000000000000..f2dacb4245ec
--- /dev/null
+++ b/include/asm-ia64/cacheflush.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_CACHEFLUSH_H
+#define _ASM_IA64_CACHEFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/page-flags.h>
+
+#include <asm/bitops.h>
+#include <asm/page.h>
+
+/*
+ * Cache flushing routines.  This is the kind of stuff that can be very expensive, so try
+ * to avoid them whenever possible.
+ */
+
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma,page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define flush_dcache_page(page)			\
+do {						\
+	clear_bit(PG_arch_1, &(page)->flags);	\
+} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range (unsigned long start, unsigned long end);
+
+#define flush_icache_user_range(vma, page, user_addr, len)					\
+do {												\
+	unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK);	\
+	flush_icache_range(_addr, _addr + (len));						\
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h
new file mode 100644
index 000000000000..1f230ff8ea81
--- /dev/null
+++ b/include/asm-ia64/checksum.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_IA64_CHECKSUM_H
+#define _ASM_IA64_CHECKSUM_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern unsigned short ip_fast_csum (unsigned char * iph, unsigned int ihl);
+
+/*
+ * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
+ * checksum, already complemented
+ */
+extern unsigned short int csum_tcpudp_magic (unsigned long saddr,
+					     unsigned long daddr,
+					     unsigned short len,
+					     unsigned short proto,
+					     unsigned int sum);
+
+extern unsigned int csum_tcpudp_nofold (unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					unsigned int sum);
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial (const unsigned char * buff, int len,
+				  unsigned int sum);
+
+/*
+ * Same as csum_partial, but copies from src while it checksums.
+ *
+ * Here it is even more important to align src and dst on a 32-bit (or
+ * even better 64-bit) boundary.
+ */
+extern unsigned int csum_partial_copy_from_user (const char *src, char *dst,
+						 int len, unsigned int sum,
+						 int *errp);
+
+extern unsigned int csum_partial_copy_nocheck (const char *src, char *dst,
+					       int len, unsigned int sum);
+
+/*
+ * This routine is used for miscellaneous IP-like checksums, mainly in
+ * icmp.c
+ */
+extern unsigned short ip_compute_csum (unsigned char *buff, int len);
+
+/*
+ * Fold a partial checksum without adding pseudo headers.
+ */
+static inline unsigned short
+csum_fold (unsigned int sum)
+{
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return ~sum;
+}
+
+#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h
new file mode 100644
index 000000000000..cc0ff0a4bdd0
--- /dev/null
+++ b/include/asm-ia64/compat.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_IA64_COMPAT_H
+#define _ASM_IA64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_key_t;
+typedef s32		compat_pid_t;
+typedef u16		compat_uid_t;
+typedef u16		compat_gid_t;
+typedef u32		compat_uid32_t;
+typedef u32		compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY       0x7fffffff
+#define COMPAT_RLIM_INFINITY           0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	compat_uid32_t uid;
+	compat_gid32_t gid;
+	compat_uid32_t cuid;
+	compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not be used for syscall parameters,
+ * just declare them as pointers because the syscall entry code will have appropriately
+ * comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *
+compat_ptr (compat_uptr_t uptr)
+{
+	return (void __user *) (unsigned long) uptr;
+}
+
+static __inline__ void __user *
+compat_alloc_user_space (long len)
+{
+	struct pt_regs *regs = ia64_task_regs(current);
+	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
+}
+
+#endif /* _ASM_IA64_COMPAT_H */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
new file mode 100644
index 000000000000..e87fa3210a2b
--- /dev/null
+++ b/include/asm-ia64/cpu.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_CPU_H_
+#define _ASM_IA64_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/percpu.h>
+
+struct ia64_cpu {
+	struct cpu cpu;
+};
+
+DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
+
+DECLARE_PER_CPU(int, cpu_state);
+
+extern int arch_register_cpu(int num);
+#ifdef CONFIG_HOTPLUG_CPU
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_IA64_CPU_H_ */
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
new file mode 100644
index 000000000000..72400a78002a
--- /dev/null
+++ b/include/asm-ia64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/current.h b/include/asm-ia64/current.h
new file mode 100644
index 000000000000..c659f90fbfd9
--- /dev/null
+++ b/include/asm-ia64/current.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_IA64_CURRENT_H
+#define _ASM_IA64_CURRENT_H
+
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/intrinsics.h>
+
+/*
+ * In kernel mode, thread pointer (r13) is used to point to the current task
+ * structure.
+ */
+#define current	((struct task_struct *) ia64_getreg(_IA64_REG_TP))
+
+#endif /* _ASM_IA64_CURRENT_H */
diff --git a/include/asm-ia64/cyclone.h b/include/asm-ia64/cyclone.h
new file mode 100644
index 000000000000..88f6500e84ab
--- /dev/null
+++ b/include/asm-ia64/cyclone.h
@@ -0,0 +1,15 @@
+#ifndef ASM_IA64_CYCLONE_H
+#define ASM_IA64_CYCLONE_H
+
+#ifdef	CONFIG_IA64_CYCLONE
+extern int use_cyclone;
+extern void __init cyclone_setup(void);
+#else	/* CONFIG_IA64_CYCLONE */
+#define use_cyclone 0
+static inline void cyclone_setup(void)
+{
+	printk(KERN_ERR "Cyclone Counter: System not configured"
+					" w/ CONFIG_IA64_CYCLONE.\n");
+}
+#endif	/* CONFIG_IA64_CYCLONE */
+#endif	/* !ASM_IA64_CYCLONE_H */
diff --git a/include/asm-ia64/delay.h b/include/asm-ia64/delay.h
new file mode 100644
index 000000000000..57182d6f2b9a
--- /dev/null
+++ b/include/asm-ia64/delay.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_DELAY_H
+#define _ASM_IA64_DELAY_H
+
+/*
+ * Delay routines using a pre-computed "cycles/usec" value.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+static __inline__ void
+ia64_set_itm (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITM, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itm (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_CR_ITM);
+	ia64_srlz_d();
+	return result;
+}
+
+static __inline__ void
+ia64_set_itv (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITV, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itv (void)
+{
+	return ia64_getreg(_IA64_REG_CR_ITV);
+}
+
+static __inline__ void
+ia64_set_itc (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_AR_ITC, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itc (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_AR_ITC);
+	ia64_barrier();
+#ifdef CONFIG_ITANIUM
+	while (unlikely((__s32) result == -1)) {
+		result = ia64_getreg(_IA64_REG_AR_ITC);
+		ia64_barrier();
+	}
+#endif
+	return result;
+}
+
+extern void ia64_delay_loop (unsigned long loops);
+
+static __inline__ void
+__delay (unsigned long loops)
+{
+	if (unlikely(loops < 1))
+		return;
+
+	ia64_delay_loop (loops - 1);
+}
+
+static __inline__ void
+udelay (unsigned long usecs)
+{
+	unsigned long start = ia64_get_itc();
+	unsigned long cycles = usecs*local_cpu_data->cyc_per_usec;
+
+	while (ia64_get_itc() - start < cycles)
+		cpu_relax();
+}
+
+#endif /* _ASM_IA64_DELAY_H */
diff --git a/include/asm-ia64/div64.h b/include/asm-ia64/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-ia64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h
new file mode 100644
index 000000000000..6347c9845642
--- /dev/null
+++ b/include/asm-ia64/dma-mapping.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_DMA_MAPPING_H
+#define _ASM_IA64_DMA_MAPPING_H
+
+/*
+ * Copyright (C) 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/config.h>
+#include <asm/machvec.h>
+
+#define dma_alloc_coherent	platform_dma_alloc_coherent
+#define dma_alloc_noncoherent	platform_dma_alloc_coherent	/* coherent mem. is cheap */
+#define dma_free_coherent	platform_dma_free_coherent
+#define dma_free_noncoherent	platform_dma_free_coherent
+#define dma_map_single		platform_dma_map_single
+#define dma_map_sg		platform_dma_map_sg
+#define dma_unmap_single	platform_dma_unmap_single
+#define dma_unmap_sg		platform_dma_unmap_sg
+#define dma_sync_single_for_cpu	platform_dma_sync_single_for_cpu
+#define dma_sync_sg_for_cpu	platform_dma_sync_sg_for_cpu
+#define dma_sync_single_for_device platform_dma_sync_single_for_device
+#define dma_sync_sg_for_device	platform_dma_sync_sg_for_device
+#define dma_mapping_error	platform_dma_mapping_error
+
+#define dma_map_page(dev, pg, off, size, dir)				\
+	dma_map_single(dev, page_address(pg) + (off), (size), (dir))
+#define dma_unmap_page(dev, dma_addr, size, dir)			\
+	dma_unmap_single(dev, dma_addr, size, dir)
+
+/*
+ * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
+ * See Documentation/DMA-API.txt for details.
+ */
+
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_device(dev, dma_handle, size, dir)
+
+#define dma_supported		platform_dma_supported
+
+static inline int
+dma_set_mask (struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment (void)
+{
+	extern int ia64_max_cacheline_size;
+	return ia64_max_cacheline_size;
+}
+
+static inline void
+dma_cache_sync (void *vaddr, size_t size, enum dma_data_direction dir)
+{
+	/*
+	 * IA-64 is cache-coherent, so this is mostly a no-op.  However, we do need to
+	 * ensure that dma_cache_sync() enforces order, hence the mb().
+	 */
+	mb();
+}
+
+#define dma_is_consistent(dma_handle)	(1)	/* all we do is coherent memory... */
+
+#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h
new file mode 100644
index 000000000000..3be1b4925e18
--- /dev/null
+++ b/include/asm-ia64/dma.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IA64_DMA_H
+#define _ASM_IA64_DMA_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/io.h>		/* need byte IO */
+
+extern unsigned long MAX_DMA_ADDRESS;
+
+#ifdef CONFIG_PCI
+  extern int isa_dma_bridge_buggy;
+#else
+# define isa_dma_bridge_buggy 	(0)
+#endif
+
+#define free_dma(x)
+
+#endif /* _ASM_IA64_DMA_H */
diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h
new file mode 100644
index 000000000000..7d4ccc4b976e
--- /dev/null
+++ b/include/asm-ia64/elf.h
@@ -0,0 +1,259 @@
+#ifndef _ASM_IA64_ELF_H
+#define _ASM_IA64_ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_IA_64
+
+#define USE_ELF_CORE_DUMP
+
+/* Least-significant four bits of ELF header's e_flags are OS-specific.  The bits are
+   interpreted as follows by Linux: */
+#define EF_IA_64_LINUX_EXECUTABLE_STACK	0x1	/* is stack (& heap) executable by default? */
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader.  We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x800000000UL)
+
+#define PT_IA_64_UNWIND		0x70000001
+
+/* IA-64 relocations: */
+#define R_IA64_NONE		0x00	/* none */
+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22		0x2a	/* @gprel(sym+add), add imm22 */
+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym+add), mov imm64 */
+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym+add), data4 MSB */
+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym+add), data4 LSB */
+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym+add), data8 MSB */
+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym+add), add imm22 */
+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym+add), add imm22 */
+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym+add), data8 MSB */
+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym+add), data8 LSB */
+#define R_IA64_FPTR64I		0x43	/* @fptr(sym+add), mov imm64 */
+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym+add), data4 MSB */
+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym+add), data4 LSB */
+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym+add), data8 MSB */
+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym+add), data8 LSB */
+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym+add), brl */
+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym+add), chk.s */
+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym+add), fchkf */
+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym+add), data4 MSB */
+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym+add), data4 LSB */
+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym+add), data8 MSB */
+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), 4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), 4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), 8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), 8 LSB */
+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym+add), data4 MSB */
+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym+add), data4 LSB */
+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym+add), data8 MSB */
+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym+add), data8 LSB */
+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym+add), data4 MSB */
+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym+add), data4 LSB */
+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym+add), data8 MSB */
+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym+add), data8 LSB */
+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym+add), imm22 */
+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym+add), imm64 */
+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY		0x84	/* dynamic reloc, data copy */
+#define R_IA64_SUB		0x85	/* -symbol + addend, add imm22 */
+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
+#define R_IA64_TPREL14		0x91	/* @tprel(sym+add), add imm14 */
+#define R_IA64_TPREL22		0x92	/* @tprel(sym+add), add imm22 */
+#define R_IA64_TPREL64I		0x93	/* @tprel(sym+add), add imm64 */
+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym+add), data8 MSB */
+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), add imm22 */
+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym+add), data8 MSB */
+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(s+a)), imm22 */
+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym+add), imm14 */
+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym+add), imm22 */
+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym+add), imm64 */
+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym+add), data4 MSB */
+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym+add), data4 LSB */
+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym+add), data8 MSB */
+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
+
+/* IA-64 specific section flags: */
+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
+
+/*
+ * We use (abuse?) this macro to insert the (empty) vm_area that is
+ * used to map the register backing store.  I don't see any better
+ * place to do this, but we should discuss this with Linus once we can
+ * talk to him...
+ */
+extern void ia64_init_addr_space (void);
+#define ELF_PLAT_INIT(_r, load_addr)	ia64_init_addr_space()
+
+/* ELF register definitions.  This is needed for core dump support.  */
+
+/*
+ * elf_gregset_t contains the application-level state in the following order:
+ *	r0-r31
+ *	NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ *	predicate registers (p0-p63)
+ *	b0-b7
+ *	ip cfm psr
+ *	ar.rsc ar.bsp ar.bspstore ar.rnat
+ *	ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+#define ELF_NGREG	128	/* we really need just 72 but let's leave some headroom... */
+#define ELF_NFPREG	128	/* f0 and f1 could be omitted, but so what... */
+
+typedef unsigned long elf_fpxregset_t;
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia64_fpreg elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+
+
+struct pt_regs;	/* forward declaration... */
+extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
+#define ELF_CORE_COPY_REGS(_dest,_regs)	ia64_elf_core_copy_regs(_regs, _dest);
+
+/* This macro yields a bitmask that programs can use to figure out
+   what instruction set this CPU supports.  */
+#define ELF_HWCAP 	0
+
+/* This macro yields a string that ld.so will use to load
+   implementation specific libraries for optimization.  Not terribly
+   relevant until we have real hardware to play with... */
+#define ELF_PLATFORM	NULL
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO	32
+#define AT_SYSINFO_EHDR	33
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
+#define elf_read_implies_exec(ex, executable_stack)					\
+	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
+
+struct task_struct;
+
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_gregs) dump_task_regs(tsk, elf_gregs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#define GATE_EHDR	((const struct elfhdr *) GATE_ADDR)
+
+#define ARCH_DLINFO								\
+do {										\
+	extern char __kernel_syscall_via_epc[];					\
+	NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc);	\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
+} while (0)
+
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS						\
+do {										\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;									\
+	Elf64_Off ofs = 0;						      \
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
+		struct elf_phdr phdr = gate_phdrs[i];			      \
+		if (phdr.p_type == PT_LOAD) {					\
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
+			phdr.p_filesz = phdr.p_memsz;			      \
+			if (ofs == 0) {					      \
+				ofs = phdr.p_offset = offset;		      \
+			offset += phdr.p_filesz;				\
+		}							      \
+		else							      \
+				phdr.p_offset = ofs;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;					\
+		phdr.p_paddr = 0; /* match other core phdrs */			\
+		DUMP_WRITE(&phdr, sizeof(phdr));				\
+	}									\
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA					\
+do {									\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;								\
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
+		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
+			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
+				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
+			break;						      \
+		}							      \
+	}								\
+} while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_ELF_H */
diff --git a/include/asm-ia64/errno.h b/include/asm-ia64/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/include/asm-ia64/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/include/asm-ia64/fcntl.h b/include/asm-ia64/fcntl.h
new file mode 100644
index 000000000000..d193981bb1d8
--- /dev/null
+++ b/include/asm-ia64/fcntl.h
@@ -0,0 +1,84 @@
+#ifndef _ASM_IA64_FCNTL_H
+#define _ASM_IA64_FCNTL_H
+/*
+ * Based on <asm-i386/fcntl.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+/*
+ * open/fcntl - O_SYNC is only implemented on blocks devices and on
+ * files located on an ext2 file system
+ */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* _ASM_IA64_FCNTL_H */
diff --git a/include/asm-ia64/fpswa.h b/include/asm-ia64/fpswa.h
new file mode 100644
index 000000000000..62edfceadaa6
--- /dev/null
+++ b/include/asm-ia64/fpswa.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_IA64_FPSWA_H
+#define _ASM_IA64_FPSWA_H
+
+/*
+ * Floating-point Software Assist
+ *
+ * Copyright (C) 1999 Intel Corporation.
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
+ */
+
+typedef struct {
+	/* 4 * 128 bits */
+	unsigned long fp_lp[4*2];
+} fp_state_low_preserved_t;
+
+typedef struct {
+	/* 10 * 128 bits */
+	unsigned long fp_lv[10 * 2];
+} fp_state_low_volatile_t;
+
+typedef	struct {
+	/* 16 * 128 bits */
+	unsigned long fp_hp[16 * 2];
+} fp_state_high_preserved_t;
+
+typedef struct {
+	/* 96 * 128 bits */
+	unsigned long fp_hv[96 * 2];
+} fp_state_high_volatile_t;
+
+/**
+ * floating point state to be passed to the FP emulation library by
+ * the trap/fault handler
+ */
+typedef struct {
+	unsigned long			bitmask_low64;
+	unsigned long			bitmask_high64;
+	fp_state_low_preserved_t	*fp_state_low_preserved;
+	fp_state_low_volatile_t		*fp_state_low_volatile;
+	fp_state_high_preserved_t	*fp_state_high_preserved;
+	fp_state_high_volatile_t	*fp_state_high_volatile;
+} fp_state_t;
+
+typedef struct {
+	unsigned long status;
+	unsigned long err0;
+	unsigned long err1;
+	unsigned long err2;
+} fpswa_ret_t;
+
+/**
+ * function header for the Floating Point software assist
+ * library. This function is invoked by the Floating point software
+ * assist trap/fault handler.
+ */
+typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
+				    unsigned long *fsr, unsigned long *isr, unsigned long *preds,
+				    unsigned long *ifs, fp_state_t *fp_state);
+
+/**
+ * This is the FPSWA library interface as defined by EFI.  We need to pass a 
+ * pointer to the interface itself on a call to the assist library
+ */
+typedef struct {
+	unsigned int	 revision;
+	unsigned int	 reserved;
+	efi_fpswa_t	 fpswa;
+} fpswa_interface_t;
+
+extern fpswa_interface_t *fpswa_interface;
+
+#endif /* _ASM_IA64_FPSWA_H */
diff --git a/include/asm-ia64/fpu.h b/include/asm-ia64/fpu.h
new file mode 100644
index 000000000000..3859558ff0a4
--- /dev/null
+++ b/include/asm-ia64/fpu.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_FPU_H
+#define _ASM_IA64_FPU_H
+
+/*
+ * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/types.h>
+
+/* floating point status register: */
+#define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
+#define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
+#define FPSR_TRAP_ZD	(1 << 2)	/* zero-divide trap disabled */
+#define FPSR_TRAP_OD	(1 << 3)	/* overflow trap disabled */
+#define FPSR_TRAP_UD	(1 << 4)	/* underflow trap disabled */
+#define FPSR_TRAP_ID	(1 << 5)	/* inexact trap disabled */
+#define FPSR_S0(x)	((x) <<  6)
+#define FPSR_S1(x)	((x) << 19)
+#define FPSR_S2(x)	(__IA64_UL(x) << 32)
+#define FPSR_S3(x)	(__IA64_UL(x) << 45)
+
+/* floating-point status field controls: */
+#define FPSF_FTZ	(1 << 0)		/* flush-to-zero */
+#define FPSF_WRE	(1 << 1)		/* widest-range exponent */
+#define FPSF_PC(x)	(((x) & 0x3) << 2)	/* precision control */
+#define FPSF_RC(x)	(((x) & 0x3) << 4)	/* rounding control */
+#define FPSF_TD		(1 << 6)		/* trap disabled */
+
+/* floating-point status field flags: */
+#define FPSF_V		(1 <<  7)		/* invalid operation flag */
+#define FPSF_D		(1 <<  8)		/* denormal/unnormal operand flag */
+#define FPSF_Z		(1 <<  9)		/* zero divide (IEEE) flag */
+#define FPSF_O		(1 << 10)		/* overflow (IEEE) flag */
+#define FPSF_U		(1 << 11)		/* underflow (IEEE) flag */
+#define FPSF_I		(1 << 12)		/* inexact (IEEE) flag) */
+
+/* floating-point rounding control: */
+#define FPRC_NEAREST	0x0
+#define FPRC_NEGINF	0x1
+#define FPRC_POSINF	0x2
+#define FPRC_TRUNC	0x3
+
+#define FPSF_DEFAULT	(FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
+
+/* This default value is the same as HP-UX uses.  Don't change it
+   without a very good reason.  */
+#define FPSR_DEFAULT	(FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD	\
+			 | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID	\
+			 | FPSR_S0 (FPSF_DEFAULT)			\
+			 | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE)	\
+			 | FPSR_S2 (FPSF_DEFAULT | FPSF_TD)		\
+			 | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
+
+# ifndef __ASSEMBLY__
+
+struct ia64_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_FPU_H */
diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h
new file mode 100644
index 000000000000..7c357dfbae50
--- /dev/null
+++ b/include/asm-ia64/gcc_intrin.h
@@ -0,0 +1,597 @@
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier()	asm volatile ("":::"memory")
+
+#define ia64_stop()	asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+register unsigned long ia64_r13 asm ("r13") __attribute_used__;
+
+#define ia64_setreg(regnum, val)						\
+({										\
+	switch (regnum) {							\
+	    case _IA64_REG_PSR_L:						\
+		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
+		    break;							\
+	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		    asm volatile ("mov ar%0=%1" ::				\
+		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
+					  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
+		    asm volatile ("mov cr%0=%1" ::				\
+				          "i" (regnum - _IA64_REG_CR_DCR),	\
+					  "r"(val): "memory" );			\
+		    break;							\
+	    case _IA64_REG_SP:							\
+		    asm volatile ("mov r12=%0" ::				\
+			    		  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_GP:							\
+		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
+		break;								\
+	    default:								\
+		    ia64_bad_param_for_setreg();				\
+		    break;							\
+	}									\
+})
+
+#define ia64_getreg(regnum)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (regnum) {							\
+	case _IA64_REG_GP:							\
+		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_IP:							\
+		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_PSR:							\
+		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_TP:	/* for current() */				\
+		ia64_intri_res = ia64_r13;					\
+		break;								\
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
+				      : "i"(regnum - _IA64_REG_AR_KR0));	\
+		break;								\
+	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
+		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
+				      : "i" (regnum - _IA64_REG_CR_DCR));	\
+		break;								\
+	case _IA64_REG_SP:							\
+		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
+		break;								\
+	default:								\
+		ia64_bad_param_for_getreg();					\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode)						\
+({								\
+	switch (mode) {						\
+	case ia64_hint_pause:					\
+		asm volatile ("hint @pause" ::: "memory");	\
+		break;						\
+	}							\
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix   8
+#define ia64_mux1_shuf  9
+#define ia64_mux1_alt  10
+#define ia64_mux1_rev  11
+
+#define ia64_mux1(x, mode)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (mode) {								\
+	case ia64_mux1_brcst:							\
+		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_mix:							\
+		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_shuf:							\
+		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_alt:							\
+		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_rev:							\
+		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_popcnt(x)						\
+({								\
+	__u64 ia64_intri_res;					\
+	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_getf_exp(x)					\
+({								\
+	long ia64_intri_res;					\
+								\
+	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_shrp(a, b, count)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
+	ia64_intri_res;									\
+})
+
+#define ia64_ldfs(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfd(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfe(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf8(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf_fill(regnum, x)				\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_stfs(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfd(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfe(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf8(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf_spill(x, regnum)						\
+({										\
+	register double __f__ asm ("f"#regnum);					\
+	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_fetchadd4_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd4_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg1(ptr,x)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("xchg1 %0=[%1],%2"					\
+		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg2(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg4(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg8(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_mf()	asm volatile ("mf" ::: "memory")
+#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_thash(addr)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr)								\
+({										\
+	__u64 ia64_pa;								\
+	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
+	ia64_pa;								\
+})
+
+#define __ia64_set_dbr(index, val)						\
+	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val)						\
+	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val)						\
+	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val)						\
+	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val)						\
+	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_rr(index, val)							\
+	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_get_cpuid(index)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
+	ia64_intri_res;									\
+})
+
+#define __ia64_get_dbr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_ibr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pkr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pmc(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+
+#define ia64_get_pmd(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_rr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_ptcga(addr, size)							\
+do {										\
+	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptcl(addr, size)							\
+do {										\
+	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptri(addr, size)						\
+	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size)						\
+	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none   0
+#define ia64_lfhint_nt1    1
+#define ia64_lfhint_nt2    2
+#define ia64_lfhint_nta    3
+
+#define ia64_lfetch(lfhint, y)					\
+({								\
+        switch (lfhint) {					\
+        case ia64_lfhint_none:					\
+                asm volatile ("lfetch [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt1:					\
+                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt2:					\
+                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nta:					\
+                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
+                break;						\
+        }							\
+})
+
+#define ia64_lfetch_excl(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y)				\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_intrin_local_irq_restore(x)			\
+do {								\
+	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
+		      "(p6) ssm psr.i;"				\
+		      "(p7) rsm psr.i;;"			\
+		      "(p6) srlz.d"				\
+		      :: "r"((x)) : "p6", "p7", "memory");	\
+} while (0)
+
+#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/include/asm-ia64/hardirq.h b/include/asm-ia64/hardirq.h
new file mode 100644
index 000000000000..33ef8f096d95
--- /dev/null
+++ b/include/asm-ia64/hardirq.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_HARDIRQ_H
+#define _ASM_IA64_HARDIRQ_H
+
+/*
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+
+/*
+ * No irq_cpustat_t for IA-64.  The data is held in the per-CPU data structure.
+ */
+
+#define __ARCH_IRQ_STAT	1
+
+#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+
+#define HARDIRQ_BITS	14
+
+/*
+ * The hardirq mask has to be large enough to have space for potentially all IRQ sources
+ * in the system nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+extern void __iomem *ipi_base_addr;
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/include/asm-ia64/hdreg.h b/include/asm-ia64/hdreg.h
new file mode 100644
index 000000000000..83b5161d2678
--- /dev/null
+++ b/include/asm-ia64/hdreg.h
@@ -0,0 +1,14 @@
+/*
+ *  linux/include/asm-ia64/hdreg.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+#warning this file is obsolete, please do not use it
+
+#ifndef __ASM_IA64_HDREG_H
+#define __ASM_IA64_HDREG_H
+
+typedef unsigned short ide_ioreg_t;
+
+#endif /* __ASM_IA64_HDREG_H */
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
new file mode 100644
index 000000000000..041ab8c51a64
--- /dev/null
+++ b/include/asm-ia64/hw_irq.h
@@ -0,0 +1,144 @@
+#ifndef _ASM_IA64_HW_IRQ_H
+#define _ASM_IA64_HW_IRQ_H
+
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/profile.h>
+
+#include <asm/machvec.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+typedef u8 ia64_vector;
+
+/*
+ * 0 special
+ *
+ * 1,3-14 are reserved from firmware
+ *
+ * 16-255 (vectored external interrupts) are available
+ *
+ * 15 spurious interrupt (see IVR)
+ *
+ * 16 lowest priority, 255 highest priority
+ *
+ * 15 classes of 16 interrupts each.
+ */
+#define IA64_MIN_VECTORED_IRQ		 16
+#define IA64_MAX_VECTORED_IRQ		255
+#define IA64_NUM_VECTORS		256
+
+#define AUTO_ASSIGN			-1
+
+#define IA64_SPURIOUS_INT_VECTOR	0x0f
+
+/*
+ * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
+ */
+#define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
+#define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
+#define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
+#define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
+/*
+ * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
+ */
+#define IA64_FIRST_DEVICE_VECTOR	0x30
+#define IA64_LAST_DEVICE_VECTOR		0xe7
+#define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
+
+#define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
+#define IA64_PERFMON_VECTOR		0xee	/* performanc monitor interrupt vector */
+#define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
+#define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
+#define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
+#define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
+
+/* Used for encoding redirected irqs */
+
+#define IA64_IRQ_REDIRECTED		(1 << 31)
+
+/* IA64 inter-cpu interrupt related definitions */
+
+#define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
+
+/* Delivery modes for inter-cpu interrupts */
+enum {
+        IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
+        IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
+        IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
+        IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
+        IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
+};
+
+extern __u8 isa_irq_to_vector_map[16];
+#define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
+
+extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
+
+extern int assign_irq_vector (int irq);	/* allocate a free vector */
+extern void free_irq_vector (int vector);
+extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
+extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
+
+static inline void
+hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
+{
+	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+}
+
+/*
+ * Default implementations for the irq-descriptor API:
+ */
+
+extern irq_desc_t irq_desc[NR_IRQS];
+
+#ifndef CONFIG_IA64_GENERIC
+static inline unsigned int
+__ia64_local_vector_to_irq (ia64_vector vec)
+{
+	return (unsigned int) vec;
+}
+#endif
+
+/*
+ * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
+ * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
+ * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
+ * domains meaning that the translation from vector number to irq number depends on the
+ * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
+ * differences and provides a uniform means to translate between vector and irq numbers
+ * and to obtain the irq descriptor for a given irq number.
+ */
+
+/* Return a pointer to the irq descriptor for IRQ.  */
+static inline irq_desc_t *
+irq_descp (int irq)
+{
+	return irq_desc + irq;
+}
+
+/* Extract the IA-64 vector that corresponds to IRQ.  */
+static inline ia64_vector
+irq_to_vector (int irq)
+{
+	return (ia64_vector) irq;
+}
+
+/*
+ * Convert the local IA-64 vector to the corresponding irq number.  This translation is
+ * done in the context of the interrupt domain that the currently executing CPU belongs
+ * to.
+ */
+static inline unsigned int
+local_vector_to_irq (ia64_vector vec)
+{
+	return platform_local_vector_to_irq(vec);
+}
+
+#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/include/asm-ia64/ia32.h b/include/asm-ia64/ia32.h
new file mode 100644
index 000000000000..8e746b2413a6
--- /dev/null
+++ b/include/asm-ia64/ia32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_IA32_H
+#define _ASM_IA64_IA32_H
+
+#include <linux/config.h>
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+
+#define IA32_NR_syscalls		285	/* length of syscall table */
+#define IA32_PAGE_SHIFT			12	/* 4KB pages */
+
+#ifndef __ASSEMBLY__
+
+# ifdef CONFIG_IA32_SUPPORT
+
+extern void ia32_cpu_init (void);
+extern void ia32_mem_init (void);
+extern void ia32_gdt_init (void);
+extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
+extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
+extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
+
+# endif /* !CONFIG_IA32_SUPPORT */
+
+/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
+extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+			      sigset_t *set, struct pt_regs *regs);
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+extern int ia32_copy_partial_page_list (struct task_struct *, unsigned long);
+extern void ia32_drop_partial_page_list (struct task_struct *);
+#else
+# define ia32_copy_partial_page_list(a1, a2)	0
+# define ia32_drop_partial_page_list(a1)	do { ; } while (0)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_IA32_H */
diff --git a/include/asm-ia64/ia64regs.h b/include/asm-ia64/ia64regs.h
new file mode 100644
index 000000000000..1757f1c11ad4
--- /dev/null
+++ b/include/asm-ia64/ia64regs.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002,2003 Intel Corp.
+ *      Jun Nakajima <jun.nakajima@intel.com>
+ *      Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#ifndef _ASM_IA64_IA64REGS_H
+#define _ASM_IA64_IA64REGS_H
+
+/*
+ * Register Names for getreg() and setreg().
+ *
+ * The "magic" numbers happen to match the values used by the Intel compiler's
+ * getreg()/setreg() intrinsics.
+ */
+
+/* Special Registers */
+
+#define _IA64_REG_IP		1016	/* getreg only */
+#define _IA64_REG_PSR		1019
+#define _IA64_REG_PSR_L		1019
+
+/* General Integer Registers */
+
+#define _IA64_REG_GP		1025	/* R1 */
+#define _IA64_REG_R8		1032	/* R8 */
+#define _IA64_REG_R9		1033	/* R9 */
+#define _IA64_REG_SP		1036	/* R12 */
+#define _IA64_REG_TP		1037	/* R13 */
+
+/* Application Registers */
+
+#define _IA64_REG_AR_KR0	3072
+#define _IA64_REG_AR_KR1	3073
+#define _IA64_REG_AR_KR2	3074
+#define _IA64_REG_AR_KR3	3075
+#define _IA64_REG_AR_KR4	3076
+#define _IA64_REG_AR_KR5	3077
+#define _IA64_REG_AR_KR6	3078
+#define _IA64_REG_AR_KR7	3079
+#define _IA64_REG_AR_RSC	3088
+#define _IA64_REG_AR_BSP	3089
+#define _IA64_REG_AR_BSPSTORE	3090
+#define _IA64_REG_AR_RNAT	3091
+#define _IA64_REG_AR_FCR	3093
+#define _IA64_REG_AR_EFLAG	3096
+#define _IA64_REG_AR_CSD	3097
+#define _IA64_REG_AR_SSD	3098
+#define _IA64_REG_AR_CFLAG	3099
+#define _IA64_REG_AR_FSR	3100
+#define _IA64_REG_AR_FIR	3101
+#define _IA64_REG_AR_FDR	3102
+#define _IA64_REG_AR_CCV	3104
+#define _IA64_REG_AR_UNAT	3108
+#define _IA64_REG_AR_FPSR	3112
+#define _IA64_REG_AR_ITC	3116
+#define _IA64_REG_AR_PFS	3136
+#define _IA64_REG_AR_LC		3137
+#define _IA64_REG_AR_EC		3138
+
+/* Control Registers */
+
+#define _IA64_REG_CR_DCR	4096
+#define _IA64_REG_CR_ITM	4097
+#define _IA64_REG_CR_IVA	4098
+#define _IA64_REG_CR_PTA	4104
+#define _IA64_REG_CR_IPSR	4112
+#define _IA64_REG_CR_ISR	4113
+#define _IA64_REG_CR_IIP	4115
+#define _IA64_REG_CR_IFA	4116
+#define _IA64_REG_CR_ITIR	4117
+#define _IA64_REG_CR_IIPA	4118
+#define _IA64_REG_CR_IFS	4119
+#define _IA64_REG_CR_IIM	4120
+#define _IA64_REG_CR_IHA	4121
+#define _IA64_REG_CR_LID	4160
+#define _IA64_REG_CR_IVR	4161	/* getreg only */
+#define _IA64_REG_CR_TPR	4162
+#define _IA64_REG_CR_EOI	4163
+#define _IA64_REG_CR_IRR0	4164	/* getreg only */
+#define _IA64_REG_CR_IRR1	4165	/* getreg only */
+#define _IA64_REG_CR_IRR2	4166	/* getreg only */
+#define _IA64_REG_CR_IRR3	4167	/* getreg only */
+#define _IA64_REG_CR_ITV	4168
+#define _IA64_REG_CR_PMV	4169
+#define _IA64_REG_CR_CMCV	4170
+#define _IA64_REG_CR_LRR0	4176
+#define _IA64_REG_CR_LRR1	4177
+
+/* Indirect Registers for getindreg() and setindreg() */
+
+#define _IA64_REG_INDR_CPUID	9000	/* getindreg only */
+#define _IA64_REG_INDR_DBR	9001
+#define _IA64_REG_INDR_IBR	9002
+#define _IA64_REG_INDR_PKR	9003
+#define _IA64_REG_INDR_PMC	9004
+#define _IA64_REG_INDR_PMD	9005
+#define _IA64_REG_INDR_RR	9006
+
+#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
new file mode 100644
index 000000000000..e62b95301d51
--- /dev/null
+++ b/include/asm-ia64/ide.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/include/asm-ia64/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ia64 architecture specific IDE code.
+ */
+
+#ifndef __ASM_IA64_IDE_H
+#define __ASM_IA64_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#include <linux/irq.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_PCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	6
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static inline int ide_default_irq(unsigned long base)
+{
+	switch (base) {
+	      case 0x1f0: return isa_irq_to_vector(14);
+	      case 0x170: return isa_irq_to_vector(15);
+	      case 0x1e8: return isa_irq_to_vector(11);
+	      case 0x168: return isa_irq_to_vector(10);
+	      case 0x1e0: return isa_irq_to_vector(8);
+	      case 0x160: return isa_irq_to_vector(12);
+	      default:
+		return 0;
+	}
+}
+
+static inline unsigned long ide_default_io_base(int index)
+{
+	switch (index) {
+	      case 0: return 0x1f0;
+	      case 1: return 0x170;
+	      case 2: return 0x1e8;
+	      case 3: return 0x168;
+	      case 4: return 0x1e0;
+	      case 5: return 0x160;
+	      default:
+		return 0;
+	}
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_IA64_IDE_H */
diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h
new file mode 100644
index 000000000000..a7122d850177
--- /dev/null
+++ b/include/asm-ia64/intel_intrin.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_IA64_INTEL_INTRIN_H
+#define _ASM_IA64_INTEL_INTRIN_H
+/*
+ * Intel Compiler Intrinsics
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ *
+ */
+#include <asm/types.h>
+
+void  __lfetch(int lfhint, void *y);
+void  __lfetch_excl(int lfhint, void *y);
+void  __lfetch_fault(int lfhint, void *y);
+void  __lfetch_fault_excl(int lfhint, void *y);
+
+/* In the following, whichFloatReg should be an integer from 0-127 */
+void  __ldfs(const int whichFloatReg, void *src);
+void  __ldfd(const int whichFloatReg, void *src);
+void  __ldfe(const int whichFloatReg, void *src);
+void  __ldf8(const int whichFloatReg, void *src);
+void  __ldf_fill(const int whichFloatReg, void *src);
+void  __stfs(void *dst, const int whichFloatReg);
+void  __stfd(void *dst, const int whichFloatReg);
+void  __stfe(void *dst, const int whichFloatReg);
+void  __stf8(void *dst, const int whichFloatReg);
+void  __stf_spill(void *dst, const int whichFloatReg);
+
+void  __st1_rel(void *dst, const __s8  value);
+void  __st2_rel(void *dst, const __s16 value);
+void  __st4_rel(void *dst, const __s32 value);
+void  __st8_rel(void *dst, const __s64 value);
+__u8  __ld1_acq(void *src);
+__u16 __ld2_acq(void *src);
+__u32 __ld4_acq(void *src);
+__u64 __ld8_acq(void *src);
+
+__u64 __fetchadd4_acq(__u32 *addend, const int increment);
+__u64 __fetchadd4_rel(__u32 *addend, const int increment);
+__u64 __fetchadd8_acq(__u64 *addend, const int increment);
+__u64 __fetchadd8_rel(__u64 *addend, const int increment);
+
+__u64 __getf_exp(double d);
+
+/* OS Related Itanium(R) Intrinsics  */
+
+/* The names to use for whichReg and whichIndReg below come from
+   the include file asm/ia64regs.h */
+
+__u64 __getIndReg(const int whichIndReg, __s64 index);
+__u64 __getReg(const int whichReg);
+
+void  __setIndReg(const int whichIndReg, __s64 index, __u64 value);
+void  __setReg(const int whichReg, __u64 value);
+
+void  __mf(void);
+void  __mfa(void);
+void  __synci(void);
+void  __itcd(__s64 pa);
+void  __itci(__s64 pa);
+void  __itrd(__s64 whichTransReg, __s64 pa);
+void  __itri(__s64 whichTransReg, __s64 pa);
+void  __ptce(__s64 va);
+void  __ptcl(__s64 va, __s64 pagesz);
+void  __ptcg(__s64 va, __s64 pagesz);
+void  __ptcga(__s64 va, __s64 pagesz);
+void  __ptri(__s64 va, __s64 pagesz);
+void  __ptrd(__s64 va, __s64 pagesz);
+void  __invala (void);
+void  __invala_gr(const int whichGeneralReg /* 0-127 */ );
+void  __invala_fr(const int whichFloatReg /* 0-127 */ );
+void  __nop(const int);
+void  __fc(__u64 *addr);
+void  __sum(int mask);
+void  __rum(int mask);
+void  __ssm(int mask);
+void  __rsm(int mask);
+__u64 __thash(__s64);
+__u64 __ttag(__s64);
+__s64 __tpa(__s64);
+
+/* Intrinsics for implementing get/put_user macros */
+void __st_user(const char *tableName, __u64 addr, char size, char relocType, __u64 val);
+void __ld_user(const char *tableName, __u64 addr, char size, char relocType);
+
+/* This intrinsic does not generate code, it creates a barrier across which
+ * the compiler will not schedule data access instructions.
+ */
+void __memory_barrier(void);
+
+void __isrlz(void);
+void __dsrlz(void);
+
+__u64  _m64_mux1(__u64 a, const int n);
+__u64  __thash(__u64);
+
+/* Lock and Atomic Operation Related Intrinsics */
+__u64 _InterlockedExchange8(volatile __u8 *trgt, __u8 value);
+__u64 _InterlockedExchange16(volatile __u16 *trgt, __u16 value);
+__s64 _InterlockedExchange(volatile __u32 *trgt, __u32 value);
+__s64 _InterlockedExchange64(volatile __u64 *trgt, __u64 value);
+
+__u64 _InterlockedCompareExchange8_rel(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange8_acq(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_rel(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_acq(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_rel(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_acq(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_rel(volatile __u64 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_acq(volatile __u64 *dest, __u64 xchg, __u64 comp);
+
+__s64 _m64_dep_mi(const int v, __s64 s, const int p, const int len);
+__s64 _m64_shrp(__s64 a, __s64 b, const int count);
+__s64 _m64_popcnt(__s64 a);
+
+#define ia64_barrier()		__memory_barrier()
+
+#define ia64_stop()	/* Nothing: As of now stop bit is generated for each
+		 	 * intrinsic
+		 	 */
+
+#define ia64_getreg		__getReg
+#define ia64_setreg		__setReg
+
+#define ia64_hint(x)
+
+#define ia64_mux1_brcst	 0
+#define ia64_mux1_mix		 8
+#define ia64_mux1_shuf		 9
+#define ia64_mux1_alt		10
+#define ia64_mux1_rev		11
+
+#define ia64_mux1		_m64_mux1
+#define ia64_popcnt		_m64_popcnt
+#define ia64_getf_exp		__getf_exp
+#define ia64_shrp		_m64_shrp
+
+#define ia64_tpa		__tpa
+#define ia64_invala		__invala
+#define ia64_invala_gr		__invala_gr
+#define ia64_invala_fr		__invala_fr
+#define ia64_nop		__nop
+#define ia64_sum		__sum
+#define ia64_ssm		__ssm
+#define ia64_rum		__rum
+#define ia64_rsm		__rsm
+#define ia64_fc 		__fc
+
+#define ia64_ldfs		__ldfs
+#define ia64_ldfd		__ldfd
+#define ia64_ldfe		__ldfe
+#define ia64_ldf8		__ldf8
+#define ia64_ldf_fill		__ldf_fill
+
+#define ia64_stfs		__stfs
+#define ia64_stfd		__stfd
+#define ia64_stfe		__stfe
+#define ia64_stf8		__stf8
+#define ia64_stf_spill		__stf_spill
+
+#define ia64_mf		__mf
+#define ia64_mfa		__mfa
+
+#define ia64_fetchadd4_acq	__fetchadd4_acq
+#define ia64_fetchadd4_rel	__fetchadd4_rel
+#define ia64_fetchadd8_acq	__fetchadd8_acq
+#define ia64_fetchadd8_rel	__fetchadd8_rel
+
+#define ia64_xchg1		_InterlockedExchange8
+#define ia64_xchg2		_InterlockedExchange16
+#define ia64_xchg4		_InterlockedExchange
+#define ia64_xchg8		_InterlockedExchange64
+
+#define ia64_cmpxchg1_rel	_InterlockedCompareExchange8_rel
+#define ia64_cmpxchg1_acq	_InterlockedCompareExchange8_acq
+#define ia64_cmpxchg2_rel	_InterlockedCompareExchange16_rel
+#define ia64_cmpxchg2_acq	_InterlockedCompareExchange16_acq
+#define ia64_cmpxchg4_rel	_InterlockedCompareExchange_rel
+#define ia64_cmpxchg4_acq	_InterlockedCompareExchange_acq
+#define ia64_cmpxchg8_rel	_InterlockedCompareExchange64_rel
+#define ia64_cmpxchg8_acq	_InterlockedCompareExchange64_acq
+
+#define __ia64_set_dbr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_DBR, index, val)
+#define ia64_set_ibr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_IBR, index, val)
+#define ia64_set_pkr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PKR, index, val)
+#define ia64_set_pmc(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMC, index, val)
+#define ia64_set_pmd(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMD, index, val)
+#define ia64_set_rr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_RR, index, val)
+
+#define ia64_get_cpuid(index) 	__getIndReg(_IA64_REG_INDR_CPUID, index)
+#define __ia64_get_dbr(index) 	__getIndReg(_IA64_REG_INDR_DBR, index)
+#define ia64_get_ibr(index) 	__getIndReg(_IA64_REG_INDR_IBR, index)
+#define ia64_get_pkr(index) 	__getIndReg(_IA64_REG_INDR_PKR, index)
+#define ia64_get_pmc(index) 	__getIndReg(_IA64_REG_INDR_PMC, index)
+#define ia64_get_pmd(index)  	__getIndReg(_IA64_REG_INDR_PMD, index)
+#define ia64_get_rr(index) 	__getIndReg(_IA64_REG_INDR_RR, index)
+
+#define ia64_srlz_d		__dsrlz
+#define ia64_srlz_i		__isrlz
+
+#define ia64_dv_serialize_data()
+#define ia64_dv_serialize_instruction()
+
+#define ia64_st1_rel		__st1_rel
+#define ia64_st2_rel		__st2_rel
+#define ia64_st4_rel		__st4_rel
+#define ia64_st8_rel		__st8_rel
+
+#define ia64_ld1_acq		__ld1_acq
+#define ia64_ld2_acq		__ld2_acq
+#define ia64_ld4_acq		__ld4_acq
+#define ia64_ld8_acq		__ld8_acq
+
+#define ia64_sync_i		__synci
+#define ia64_thash		__thash
+#define ia64_ttag		__ttag
+#define ia64_itcd		__itcd
+#define ia64_itci		__itci
+#define ia64_itrd		__itrd
+#define ia64_itri		__itri
+#define ia64_ptce		__ptce
+#define ia64_ptcl		__ptcl
+#define ia64_ptcg		__ptcg
+#define ia64_ptcga		__ptcga
+#define ia64_ptri		__ptri
+#define ia64_ptrd		__ptrd
+#define ia64_dep_mi		_m64_dep_mi
+
+/* Values for lfhint in __lfetch and __lfetch_fault */
+
+#define ia64_lfhint_none   	0
+#define ia64_lfhint_nt1    	1
+#define ia64_lfhint_nt2    	2
+#define ia64_lfhint_nta    	3
+
+#define ia64_lfetch		__lfetch
+#define ia64_lfetch_excl	__lfetch_excl
+#define ia64_lfetch_fault	__lfetch_fault
+#define ia64_lfetch_fault_excl	__lfetch_fault_excl
+
+#define ia64_intrin_local_irq_restore(x)		\
+do {							\
+	if ((x) != 0) {					\
+		ia64_ssm(IA64_PSR_I);			\
+		ia64_srlz_d();				\
+	} else {					\
+		ia64_rsm(IA64_PSR_I);			\
+	}						\
+} while (0)
+
+#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/include/asm-ia64/intrinsics.h b/include/asm-ia64/intrinsics.h
new file mode 100644
index 000000000000..8089f955e5d2
--- /dev/null
+++ b/include/asm-ia64/intrinsics.h
@@ -0,0 +1,181 @@
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
+
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
+({										\
+	switch (sz) {								\
+	      case 4:								\
+	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
+		break;								\
+										\
+	      case 8:								\
+	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
+		break;								\
+										\
+	      default:								\
+		__bad_size_for_ia64_fetch_and_add();				\
+	}									\
+})
+
+#define ia64_fetchadd(i,v,sem)								\
+({											\
+	__u64 _tmp;									\
+	volatile __typeof__(*(v)) *_v = (v);						\
+	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
+	if ((i) == -16)									\
+		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
+	else if ((i) == -8)								\
+		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
+	else if ((i) == -4)								\
+		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
+	else if ((i) == -1)								\
+		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
+	else if ((i) == 1)								\
+		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
+	else if ((i) == 4)								\
+		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
+	else if ((i) == 8)								\
+		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
+	else if ((i) == 16)								\
+		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
+	else										\
+		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
+	(__typeof__(*(v))) (_tmp);	/* return old value */				\
+})
+
+#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer (void);
+
+#define __xchg(x,ptr,size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	      case 1:							\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	      case 2:							\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	      case 4:							\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	      case 8:							\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	      default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr,x)							     \
+  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer (void);
+
+#define ia64_cmpxchg(sem,ptr,old,new,size)						\
+({											\
+	__u64 _o_, _r_;									\
+											\
+	switch (size) {									\
+	      case 1: _o_ = (__u8 ) (long) (old); break;				\
+	      case 2: _o_ = (__u16) (long) (old); break;				\
+	      case 4: _o_ = (__u32) (long) (old); break;				\
+	      case 8: _o_ = (__u64) (long) (old); break;				\
+	      default: break;								\
+	}										\
+	switch (size) {									\
+	      case 1:									\
+	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 2:									\
+	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 4:									\
+	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 8:									\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      default:									\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
+		break;									\
+	}										\
+	(__typeof__(old)) _r_;								\
+})
+
+#define cmpxchg_acq(ptr,o,n)	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr,o,n)	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr,o,n)	cmpxchg_acq(ptr,o,n)
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)							\
+  do {										\
+	if (_cmpxchg_bugcheck_count-- <= 0) {					\
+		void *ip;							\
+		extern int printk(const char *fmt, ...);			\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
+		break;								\
+	}									\
+  } while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif
+#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
new file mode 100644
index 000000000000..491e9d1fc538
--- /dev/null
+++ b/include/asm-ia64/io.h
@@ -0,0 +1,484 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET	0xc000000000000000UL	/* region 6 */
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT		0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS		4
+#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS			24
+#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | (p & 0xfff))
+
+struct io_space {
+	unsigned long mmio_base;	/* base in MMIO space */
+	int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
+ *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK		(PIO_OFFSET - 1)
+#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+	return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+	return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range (unsigned long addr, size_t *count); /* efi.c */
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt	phys_to_virt
+#define virt_to_bus	virt_to_phys
+#define page_to_bus	page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept.  This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a()	ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes.  This will make sure that writes
+ * following the barrier will arrive after all previous writes.  For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+	ia64_mfa();
+}
+
+static inline const unsigned long
+__ia64_get_io_port_base (void)
+{
+	extern unsigned long ia64_iobase;
+
+	return ia64_iobase;
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+	struct io_space *space;
+	unsigned long offset;
+
+	space = &io_space[IO_SPACE_NR(port)];
+	port = IO_SPACE_PORT(port);
+	if (space->sparse)
+		offset = IO_SPACE_SPARSE_ENCODING(port);
+	else
+		offset = port;
+
+	return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb	___ia64_inb
+#define __ia64_inw	___ia64_inw
+#define __ia64_inl	___ia64_inl
+#define __ia64_outb	___ia64_outb
+#define __ia64_outw	___ia64_outw
+#define __ia64_outl	___ia64_outl
+#define __ia64_readb	___ia64_readb
+#define __ia64_readw	___ia64_readw
+#define __ia64_readl	___ia64_readl
+#define __ia64_readq	___ia64_readq
+#define __ia64_readb_relaxed	___ia64_readb
+#define __ia64_readw_relaxed	___ia64_readw
+#define __ia64_readl_relaxed	___ia64_readl
+#define __ia64_readq_relaxed	___ia64_readq
+#define __ia64_writeb	___ia64_writeb
+#define __ia64_writew	___ia64_writew
+#define __ia64_writel	___ia64_writel
+#define __ia64_writeq	___ia64_writeq
+#define __ia64_mmiowb	___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses.  Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order.  However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+	unsigned char ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+	unsigned short ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+	unsigned int ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inw(port);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned int *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inl(port);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *sp = src;
+
+	while (count--)
+		platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *sp = src;
+
+	while (count--)
+		platform_outw(*sp++, port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned int *sp = src;
+
+	while (count--)
+		platform_outl(*sp++, port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support.  Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb		platform_inb
+#define __inw		platform_inw
+#define __inl		platform_inl
+#define __outb		platform_outb
+#define __outw		platform_outw
+#define __outl		platform_outl
+#define __mmiowb	platform_mmiowb
+
+#define inb(p)		__inb(p)
+#define inw(p)		__inw(p)
+#define inl(p)		__inl(p)
+#define insb(p,d,c)	__insb(p,d,c)
+#define insw(p,d,c)	__insw(p,d,c)
+#define insl(p,d,c)	__insl(p,d,c)
+#define outb(v,p)	__outb(v,p)
+#define outw(v,p)	__outw(v,p)
+#define outl(v,p)	__outl(v,p)
+#define outsb(p,s,c)	__outsb(p,s,c)
+#define outsw(p,s,c)	__outsw(p,s,c)
+#define outsl(p,s,c)	__outsl(p,s,c)
+#define mmiowb()	__mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea).  Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb		platform_readb
+#define __readw		platform_readw
+#define __readl		platform_readl
+#define __readq		platform_readq
+#define __readb_relaxed	platform_readb_relaxed
+#define __readw_relaxed	platform_readw_relaxed
+#define __readl_relaxed	platform_readl_relaxed
+#define __readq_relaxed	platform_readq_relaxed
+
+#define readb(a)	__readb((a))
+#define readw(a)	__readw((a))
+#define readl(a)	__readl((a))
+#define readq(a)	__readq((a))
+#define readb_relaxed(a)	__readb_relaxed((a))
+#define readw_relaxed(a)	__readw_relaxed((a))
+#define readl_relaxed(a)	__readl_relaxed((a))
+#define readq_relaxed(a)	__readq_relaxed((a))
+#define __raw_readb	readb
+#define __raw_readw	readw
+#define __raw_readl	readl
+#define __raw_readq	readq
+#define __raw_readb_relaxed	readb_relaxed
+#define __raw_readw_relaxed	readw_relaxed
+#define __raw_readl_relaxed	readl_relaxed
+#define __raw_readq_relaxed	readq_relaxed
+#define writeb(v,a)	__writeb((v), (a))
+#define writew(v,a)	__writew((v), (a))
+#define writel(v,a)	__writel((v), (a))
+#define writeq(v,a)	__writeq((v), (a))
+#define __raw_writeb	writeb
+#define __raw_writew	writew
+#define __raw_writel	writel
+#define __raw_writeq	writeq
+
+#ifndef inb_p
+# define inb_p		inb
+#endif
+#ifndef inw_p
+# define inw_p		inw
+#endif
+#ifndef inl_p
+# define inl_p		inl
+#endif
+
+#ifndef outb_p
+# define outb_p		outb
+#endif
+#ifndef outw_p
+# define outw_p		outw
+#endif
+#ifndef outl_p
+# define outl_p		outl
+#endif
+
+/*
+ * An "address" in IO memory space is not clearly either an integer or a pointer. We will
+ * accept both, thus the casts.
+ *
+ * On ia-64, we access the physical I/O memory space through the uncached kernel region.
+ */
+static inline void __iomem *
+ioremap (unsigned long offset, unsigned long size)
+{
+	return (void __iomem *) (__IA64_UNCACHED_OFFSET | (offset));
+}
+
+static inline void
+iounmap (volatile void __iomem *addr)
+{
+}
+
+#define ioremap_nocache(o,s)	ioremap(o,s)
+
+# ifdef __KERNEL__
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+#define dma_cache_inv(_start,_size)             do { } while (0)
+#define dma_cache_wback(_start,_size)           do { } while (0)
+#define dma_cache_wback_inv(_start,_size)       do { } while (0)
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY	0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
+ * replaced by dma_merge_mask() or something of that sort.  Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
+ * expanded into:
+ *
+ *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/ioctl.h b/include/asm-ia64/ioctl.h
new file mode 100644
index 000000000000..be9cc2403d2a
--- /dev/null
+++ b/include/asm-ia64/ioctl.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_IA64_IOCTL_H
+#define _ASM_IA64_IOCTL_H
+
+/*
+ * Based on <asm-i386/ioctl.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The ia64 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IA64_IOCTL_H */
diff --git a/include/asm-ia64/ioctl32.h b/include/asm-ia64/ioctl32.h
new file mode 100644
index 000000000000..d0d227f45e05
--- /dev/null
+++ b/include/asm-ia64/ioctl32.h
@@ -0,0 +1 @@
+#include <linux/ioctl32.h>
diff --git a/include/asm-ia64/ioctls.h b/include/asm-ia64/ioctls.h
new file mode 100644
index 000000000000..31ee521aeb7a
--- /dev/null
+++ b/include/asm-ia64/ioctls.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_IA64_IOCTLS_H
+#define _ASM_IA64_IOCTLS_H
+
+/*
+ * Based on <asm-i386/ioctls.h>
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
new file mode 100644
index 000000000000..38a7a72791cc
--- /dev/null
+++ b/include/asm-ia64/iosapic.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_IA64_IOSAPIC_H
+#define __ASM_IA64_IOSAPIC_H
+
+#define	IOSAPIC_REG_SELECT	0x0
+#define	IOSAPIC_WINDOW		0x10
+#define	IOSAPIC_EOI		0x40
+
+#define	IOSAPIC_VERSION		0x1
+
+/*
+ * Redirection table entry
+ */
+#define	IOSAPIC_RTE_LOW(i)	(0x10+i*2)
+#define	IOSAPIC_RTE_HIGH(i)	(0x11+i*2)
+
+#define	IOSAPIC_DEST_SHIFT		16
+
+/*
+ * Delivery mode
+ */
+#define	IOSAPIC_DELIVERY_SHIFT		8
+#define	IOSAPIC_FIXED			0x0
+#define	IOSAPIC_LOWEST_PRIORITY	0x1
+#define	IOSAPIC_PMI			0x2
+#define	IOSAPIC_NMI			0x4
+#define	IOSAPIC_INIT			0x5
+#define	IOSAPIC_EXTINT			0x7
+
+/*
+ * Interrupt polarity
+ */
+#define	IOSAPIC_POLARITY_SHIFT		13
+#define	IOSAPIC_POL_HIGH		0
+#define	IOSAPIC_POL_LOW		1
+
+/*
+ * Trigger mode
+ */
+#define	IOSAPIC_TRIGGER_SHIFT		15
+#define	IOSAPIC_EDGE			0
+#define	IOSAPIC_LEVEL			1
+
+/*
+ * Mask bit
+ */
+
+#define	IOSAPIC_MASK_SHIFT		16
+#define	IOSAPIC_MASK			(1<<IOSAPIC_MASK_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_IOSAPIC
+
+#define NR_IOSAPICS			256
+
+static inline unsigned int iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	return readl(iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	writel(val, iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
+{
+	writel(vector, iosapic + IOSAPIC_EOI);
+}
+
+extern void __init iosapic_system_init (int pcat_compat);
+extern void __init iosapic_init (unsigned long address,
+				    unsigned int gsi_base);
+extern int gsi_to_vector (unsigned int gsi);
+extern int gsi_to_irq (unsigned int gsi);
+extern void iosapic_enable_intr (unsigned int vector);
+extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
+				  unsigned long trigger);
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+extern void iosapic_unregister_intr (unsigned int irq);
+#endif
+extern void __init iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
+				      unsigned long polarity,
+				      unsigned long trigger);
+extern int __init iosapic_register_platform_intr (u32 int_type,
+					   unsigned int gsi,
+					   int pmi_vector,
+					   u16 eid, u16 id,
+					   unsigned long polarity,
+					   unsigned long trigger);
+extern unsigned int iosapic_version (char __iomem *addr);
+
+extern void iosapic_pci_fixup (int);
+#ifdef CONFIG_NUMA
+extern void __init map_iosapic_to_node (unsigned int, int);
+#endif
+#else
+#define iosapic_system_init(pcat_compat)			do { } while (0)
+#define iosapic_init(address,gsi_base)				do { } while (0)
+#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
+#define iosapic_unregister_intr(irq)				do { } while (0)
+#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
+#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
+	polarity,trigger)					(gsi)
+#endif
+
+# endif /* !__ASSEMBLY__ */
+#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/include/asm-ia64/ipcbuf.h b/include/asm-ia64/ipcbuf.h
new file mode 100644
index 000000000000..079899ae7d32
--- /dev/null
+++ b/include/asm-ia64/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_IPCBUF_H
+#define _ASM_IA64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
new file mode 100644
index 000000000000..bd07d11d9f37
--- /dev/null
+++ b/include/asm-ia64/irq.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_IRQ_H
+#define _ASM_IA64_IRQ_H
+
+/*
+ * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 11/24/98	S.Eranian 	updated TIMER_IRQ and irq_canonicalize
+ * 01/20/99	S.Eranian	added keyboard interrupt
+ * 02/29/00     D.Mosberger	moved most things into hw_irq.h
+ */
+
+#define NR_IRQS		256
+#define NR_IRQ_VECTORS	NR_IRQS
+
+static __inline__ int
+irq_canonicalize (int irq)
+{
+	/*
+	 * We do the legacy thing here of pretending that irqs < 16
+	 * are 8259 irqs.  This really shouldn't be necessary at all,
+	 * but we keep it here as serial.c still uses it...
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void disable_irq (unsigned int);
+extern void disable_irq_nosync (unsigned int);
+extern void enable_irq (unsigned int);
+extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+
+#ifdef CONFIG_SMP
+extern void move_irq(int irq);
+#else
+#define move_irq(irq)
+#endif
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IA64_IRQ_H */
diff --git a/include/asm-ia64/kmap_types.h b/include/asm-ia64/kmap_types.h
new file mode 100644
index 000000000000..bc777525fa12
--- /dev/null
+++ b/include/asm-ia64/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_KMAP_TYPES_H
+#define _ASM_IA64_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h
new file mode 100644
index 000000000000..221b5cb564b2
--- /dev/null
+++ b/include/asm-ia64/kregs.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_IA64_KREGS_H
+#define _ASM_IA64_KREGS_H
+
+/*
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * This file defines the kernel register usage convention used by Linux/ia64.
+ */
+
+/*
+ * Kernel registers:
+ */
+#define IA64_KR_IO_BASE		0	/* ar.k0: legacy I/O base address */
+#define IA64_KR_TSSD		1	/* ar.k1: IVE uses this as the TSSD */
+#define IA64_KR_PER_CPU_DATA	3	/* ar.k3: physical per-CPU base */
+#define IA64_KR_CURRENT_STACK	4	/* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
+#define IA64_KR_FPU_OWNER	5	/* ar.k5: fpu-owner (UP only, at the moment) */
+#define IA64_KR_CURRENT		6	/* ar.k6: "current" task pointer */
+#define IA64_KR_PT_BASE		7	/* ar.k7: page table base address (physical) */
+
+#define _IA64_KR_PASTE(x,y)	x##y
+#define _IA64_KR_PREFIX(n)	_IA64_KR_PASTE(ar.k, n)
+#define IA64_KR(n)		_IA64_KR_PREFIX(IA64_KR_##n)
+
+/*
+ * Translation registers:
+ */
+#define IA64_TR_KERNEL		0	/* itr0, dtr0: maps kernel image (code & data) */
+#define IA64_TR_PALCODE		1	/* itr1: maps PALcode as required by EFI */
+#define IA64_TR_PERCPU_DATA	1	/* dtr1: percpu data */
+#define IA64_TR_CURRENT_STACK	2	/* dtr2: maps kernel's memory- & register-stacks */
+
+/* Processor status register bits: */
+#define IA64_PSR_BE_BIT		1
+#define IA64_PSR_UP_BIT		2
+#define IA64_PSR_AC_BIT		3
+#define IA64_PSR_MFL_BIT	4
+#define IA64_PSR_MFH_BIT	5
+#define IA64_PSR_IC_BIT		13
+#define IA64_PSR_I_BIT		14
+#define IA64_PSR_PK_BIT		15
+#define IA64_PSR_DT_BIT		17
+#define IA64_PSR_DFL_BIT	18
+#define IA64_PSR_DFH_BIT	19
+#define IA64_PSR_SP_BIT		20
+#define IA64_PSR_PP_BIT		21
+#define IA64_PSR_DI_BIT		22
+#define IA64_PSR_SI_BIT		23
+#define IA64_PSR_DB_BIT		24
+#define IA64_PSR_LP_BIT		25
+#define IA64_PSR_TB_BIT		26
+#define IA64_PSR_RT_BIT		27
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL0_BIT	32
+#define IA64_PSR_CPL1_BIT	33
+#define IA64_PSR_IS_BIT		34
+#define IA64_PSR_MC_BIT		35
+#define IA64_PSR_IT_BIT		36
+#define IA64_PSR_ID_BIT		37
+#define IA64_PSR_DA_BIT		38
+#define IA64_PSR_DD_BIT		39
+#define IA64_PSR_SS_BIT		40
+#define IA64_PSR_RI_BIT		41
+#define IA64_PSR_ED_BIT		43
+#define IA64_PSR_BN_BIT		44
+#define IA64_PSR_IA_BIT		45
+
+/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
+   execve().  Only list flags here that need to be cleared/set for BOTH clone2() and
+   execve().  */
+#define IA64_PSR_BITS_TO_CLEAR	(IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
+				 IA64_PSR_TB  | IA64_PSR_ID  | IA64_PSR_DA | IA64_PSR_DD | \
+				 IA64_PSR_SS  | IA64_PSR_ED  | IA64_PSR_IA)
+#define IA64_PSR_BITS_TO_SET	(IA64_PSR_DFH | IA64_PSR_SP)
+
+#define IA64_PSR_BE	(__IA64_UL(1) << IA64_PSR_BE_BIT)
+#define IA64_PSR_UP	(__IA64_UL(1) << IA64_PSR_UP_BIT)
+#define IA64_PSR_AC	(__IA64_UL(1) << IA64_PSR_AC_BIT)
+#define IA64_PSR_MFL	(__IA64_UL(1) << IA64_PSR_MFL_BIT)
+#define IA64_PSR_MFH	(__IA64_UL(1) << IA64_PSR_MFH_BIT)
+#define IA64_PSR_IC	(__IA64_UL(1) << IA64_PSR_IC_BIT)
+#define IA64_PSR_I	(__IA64_UL(1) << IA64_PSR_I_BIT)
+#define IA64_PSR_PK	(__IA64_UL(1) << IA64_PSR_PK_BIT)
+#define IA64_PSR_DT	(__IA64_UL(1) << IA64_PSR_DT_BIT)
+#define IA64_PSR_DFL	(__IA64_UL(1) << IA64_PSR_DFL_BIT)
+#define IA64_PSR_DFH	(__IA64_UL(1) << IA64_PSR_DFH_BIT)
+#define IA64_PSR_SP	(__IA64_UL(1) << IA64_PSR_SP_BIT)
+#define IA64_PSR_PP	(__IA64_UL(1) << IA64_PSR_PP_BIT)
+#define IA64_PSR_DI	(__IA64_UL(1) << IA64_PSR_DI_BIT)
+#define IA64_PSR_SI	(__IA64_UL(1) << IA64_PSR_SI_BIT)
+#define IA64_PSR_DB	(__IA64_UL(1) << IA64_PSR_DB_BIT)
+#define IA64_PSR_LP	(__IA64_UL(1) << IA64_PSR_LP_BIT)
+#define IA64_PSR_TB	(__IA64_UL(1) << IA64_PSR_TB_BIT)
+#define IA64_PSR_RT	(__IA64_UL(1) << IA64_PSR_RT_BIT)
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL	(__IA64_UL(3) << IA64_PSR_CPL0_BIT)
+#define IA64_PSR_IS	(__IA64_UL(1) << IA64_PSR_IS_BIT)
+#define IA64_PSR_MC	(__IA64_UL(1) << IA64_PSR_MC_BIT)
+#define IA64_PSR_IT	(__IA64_UL(1) << IA64_PSR_IT_BIT)
+#define IA64_PSR_ID	(__IA64_UL(1) << IA64_PSR_ID_BIT)
+#define IA64_PSR_DA	(__IA64_UL(1) << IA64_PSR_DA_BIT)
+#define IA64_PSR_DD	(__IA64_UL(1) << IA64_PSR_DD_BIT)
+#define IA64_PSR_SS	(__IA64_UL(1) << IA64_PSR_SS_BIT)
+#define IA64_PSR_RI	(__IA64_UL(3) << IA64_PSR_RI_BIT)
+#define IA64_PSR_ED	(__IA64_UL(1) << IA64_PSR_ED_BIT)
+#define IA64_PSR_BN	(__IA64_UL(1) << IA64_PSR_BN_BIT)
+#define IA64_PSR_IA	(__IA64_UL(1) << IA64_PSR_IA_BIT)
+
+/* User mask bits: */
+#define IA64_PSR_UM	(IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
+
+/* Default Control Register */
+#define IA64_DCR_PP_BIT		 0	/* privileged performance monitor default */
+#define IA64_DCR_BE_BIT		 1	/* big-endian default */
+#define IA64_DCR_LC_BIT		 2	/* ia32 lock-check enable */
+#define IA64_DCR_DM_BIT		 8	/* defer TLB miss faults */
+#define IA64_DCR_DP_BIT		 9	/* defer page-not-present faults */
+#define IA64_DCR_DK_BIT		10	/* defer key miss faults */
+#define IA64_DCR_DX_BIT		11	/* defer key permission faults */
+#define IA64_DCR_DR_BIT		12	/* defer access right faults */
+#define IA64_DCR_DA_BIT		13	/* defer access bit faults */
+#define IA64_DCR_DD_BIT		14	/* defer debug faults */
+
+#define IA64_DCR_PP	(__IA64_UL(1) << IA64_DCR_PP_BIT)
+#define IA64_DCR_BE	(__IA64_UL(1) << IA64_DCR_BE_BIT)
+#define IA64_DCR_LC	(__IA64_UL(1) << IA64_DCR_LC_BIT)
+#define IA64_DCR_DM	(__IA64_UL(1) << IA64_DCR_DM_BIT)
+#define IA64_DCR_DP	(__IA64_UL(1) << IA64_DCR_DP_BIT)
+#define IA64_DCR_DK	(__IA64_UL(1) << IA64_DCR_DK_BIT)
+#define IA64_DCR_DX	(__IA64_UL(1) << IA64_DCR_DX_BIT)
+#define IA64_DCR_DR	(__IA64_UL(1) << IA64_DCR_DR_BIT)
+#define IA64_DCR_DA	(__IA64_UL(1) << IA64_DCR_DA_BIT)
+#define IA64_DCR_DD	(__IA64_UL(1) << IA64_DCR_DD_BIT)
+
+/* Interrupt Status Register */
+#define IA64_ISR_X_BIT		32	/* execute access */
+#define IA64_ISR_W_BIT		33	/* write access */
+#define IA64_ISR_R_BIT		34	/* read access */
+#define IA64_ISR_NA_BIT		35	/* non-access */
+#define IA64_ISR_SP_BIT		36	/* speculative load exception */
+#define IA64_ISR_RS_BIT		37	/* mandatory register-stack exception */
+#define IA64_ISR_IR_BIT		38	/* invalid register frame exception */
+#define IA64_ISR_CODE_MASK	0xf
+
+#define IA64_ISR_X	(__IA64_UL(1) << IA64_ISR_X_BIT)
+#define IA64_ISR_W	(__IA64_UL(1) << IA64_ISR_W_BIT)
+#define IA64_ISR_R	(__IA64_UL(1) << IA64_ISR_R_BIT)
+#define IA64_ISR_NA	(__IA64_UL(1) << IA64_ISR_NA_BIT)
+#define IA64_ISR_SP	(__IA64_UL(1) << IA64_ISR_SP_BIT)
+#define IA64_ISR_RS	(__IA64_UL(1) << IA64_ISR_RS_BIT)
+#define IA64_ISR_IR	(__IA64_UL(1) << IA64_ISR_IR_BIT)
+
+/* ISR code field for non-access instructions */
+#define IA64_ISR_CODE_TPA	0
+#define IA64_ISR_CODE_FC	1
+#define IA64_ISR_CODE_PROBE	2
+#define IA64_ISR_CODE_TAK	3
+#define IA64_ISR_CODE_LFETCH	4
+#define IA64_ISR_CODE_PROBEF	5
+
+#endif /* _ASM_IA64_kREGS_H */
diff --git a/include/asm-ia64/linkage.h b/include/asm-ia64/linkage.h
new file mode 100644
index 000000000000..14cd72cd8007
--- /dev/null
+++ b/include/asm-ia64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
+
+#endif
diff --git a/include/asm-ia64/local.h b/include/asm-ia64/local.h
new file mode 100644
index 000000000000..1dbd584ad851
--- /dev/null
+++ b/include/asm-ia64/local.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_LOCAL_H
+#define _ASM_IA64_LOCAL_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/percpu.h>
+
+typedef struct {
+	atomic64_t val;
+} local_t;
+
+#define LOCAL_INIT(i)	((local_t) { { (i) } })
+#define local_read(l)	atomic64_read(&(l)->val)
+#define local_set(l, i)	atomic64_set(&(l)->val, i)
+#define local_inc(l)	atomic64_inc(&(l)->val)
+#define local_dec(l)	atomic64_dec(&(l)->val)
+#define local_add(l)	atomic64_add(&(l)->val)
+#define local_sub(l)	atomic64_sub(&(l)->val)
+
+/* Non-atomic variants, i.e., preemption disabled and won't be touched in interrupt, etc.  */
+
+#define __local_inc(l)		(++(l)->val.counter)
+#define __local_dec(l)		(--(l)->val.counter)
+#define __local_add(i,l)	((l)->val.counter += (i))
+#define __local_sub(i,l)	((l)->val.counter -= (i))
+
+/*
+ * Use these for per-cpu local_t variables.  Note they take a variable (eg. mystruct.foo),
+ * not an address.
+ */
+#define cpu_local_read(v)	local_read(&__ia64_per_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__ia64_per_cpu_var(v), (i))
+#define cpu_local_inc(v)	local_inc(&__ia64_per_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__ia64_per_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__ia64_per_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__ia64_per_cpu_var(v))
+
+/*
+ * Non-atomic increments, i.e., preemption disabled and won't be touched in interrupt,
+ * etc.
+ */
+#define __cpu_local_inc(v)	__local_inc(&__ia64_per_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__ia64_per_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__ia64_per_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__ia64_per_cpu_var(v))
+
+#endif /* _ASM_IA64_LOCAL_H */
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
new file mode 100644
index 000000000000..79e89a7db566
--- /dev/null
+++ b/include/asm-ia64/machvec.h
@@ -0,0 +1,390 @@
+/*
+ * Machine vector for IA-64.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_MACHVEC_H
+#define _ASM_IA64_MACHVEC_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* forward declarations: */
+struct device;
+struct pt_regs;
+struct scatterlist;
+struct page;
+struct mm_struct;
+struct pci_bus;
+
+typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_cpu_init_t (void);
+typedef void ia64_mv_irq_init_t (void);
+typedef void ia64_mv_send_ipi_t (int, int, int, int);
+typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *);
+typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
+typedef unsigned int ia64_mv_local_vector_to_irq (u8);
+typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
+typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
+				       u8 size);
+typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
+					u8 size);
+
+/* DMA-mapping interface: */
+typedef void ia64_mv_dma_init (void);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, int);
+typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
+typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
+typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
+typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
+typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
+typedef int ia64_mv_dma_supported (struct device *, u64);
+
+/*
+ * WARNING: The legacy I/O space is _architected_.  Platforms are
+ * expected to follow this architected model (see Section 10.7 in the
+ * IA-64 Architecture Software Developer's Manual).  Unfortunately,
+ * some broken machines do not follow that model, which is why we have
+ * to make the inX/outX operations part of the machine vector.
+ * Platform designers should follow the architected model whenever
+ * possible.
+ */
+typedef unsigned int ia64_mv_inb_t (unsigned long);
+typedef unsigned int ia64_mv_inw_t (unsigned long);
+typedef unsigned int ia64_mv_inl_t (unsigned long);
+typedef void ia64_mv_outb_t (unsigned char, unsigned long);
+typedef void ia64_mv_outw_t (unsigned short, unsigned long);
+typedef void ia64_mv_outl_t (unsigned int, unsigned long);
+typedef void ia64_mv_mmiowb_t (void);
+typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
+typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
+
+static inline void
+machvec_noop (void)
+{
+}
+
+static inline void
+machvec_noop_mm (struct mm_struct *mm)
+{
+}
+
+extern void machvec_setup (char **);
+extern void machvec_timer_interrupt (int, void *, struct pt_regs *);
+extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
+extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
+extern void machvec_tlb_migrate_finish (struct mm_struct *);
+
+# if defined (CONFIG_IA64_HP_SIM)
+#  include <asm/machvec_hpsim.h>
+# elif defined (CONFIG_IA64_DIG)
+#  include <asm/machvec_dig.h>
+# elif defined (CONFIG_IA64_HP_ZX1)
+#  include <asm/machvec_hpzx1.h>
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+#  include <asm/machvec_hpzx1_swiotlb.h>
+# elif defined (CONFIG_IA64_SGI_SN2)
+#  include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_GENERIC)
+
+# ifdef MACHVEC_PLATFORM_HEADER
+#  include MACHVEC_PLATFORM_HEADER
+# else
+#  define platform_name		ia64_mv.name
+#  define platform_setup	ia64_mv.setup
+#  define platform_cpu_init	ia64_mv.cpu_init
+#  define platform_irq_init	ia64_mv.irq_init
+#  define platform_send_ipi	ia64_mv.send_ipi
+#  define platform_timer_interrupt	ia64_mv.timer_interrupt
+#  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
+#  define platform_tlb_migrate_finish	ia64_mv.tlb_migrate_finish
+#  define platform_dma_init		ia64_mv.dma_init
+#  define platform_dma_alloc_coherent	ia64_mv.dma_alloc_coherent
+#  define platform_dma_free_coherent	ia64_mv.dma_free_coherent
+#  define platform_dma_map_single	ia64_mv.dma_map_single
+#  define platform_dma_unmap_single	ia64_mv.dma_unmap_single
+#  define platform_dma_map_sg		ia64_mv.dma_map_sg
+#  define platform_dma_unmap_sg		ia64_mv.dma_unmap_sg
+#  define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
+#  define platform_dma_sync_sg_for_cpu	ia64_mv.dma_sync_sg_for_cpu
+#  define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
+#  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
+#  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
+#  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
+#  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
+#  define platform_pci_legacy_read	ia64_mv.pci_legacy_read
+#  define platform_pci_legacy_write	ia64_mv.pci_legacy_write
+#  define platform_inb		ia64_mv.inb
+#  define platform_inw		ia64_mv.inw
+#  define platform_inl		ia64_mv.inl
+#  define platform_outb		ia64_mv.outb
+#  define platform_outw		ia64_mv.outw
+#  define platform_outl		ia64_mv.outl
+#  define platform_mmiowb	ia64_mv.mmiowb
+#  define platform_readb        ia64_mv.readb
+#  define platform_readw        ia64_mv.readw
+#  define platform_readl        ia64_mv.readl
+#  define platform_readq        ia64_mv.readq
+#  define platform_readb_relaxed        ia64_mv.readb_relaxed
+#  define platform_readw_relaxed        ia64_mv.readw_relaxed
+#  define platform_readl_relaxed        ia64_mv.readl_relaxed
+#  define platform_readq_relaxed        ia64_mv.readq_relaxed
+# endif
+
+/* __attribute__((__aligned__(16))) is required to make size of the
+ * structure multiple of 16 bytes.
+ * This will fillup the holes created because of section 3.3.1 in
+ * Software Conventions guide.
+ */
+struct ia64_machine_vector {
+	const char *name;
+	ia64_mv_setup_t *setup;
+	ia64_mv_cpu_init_t *cpu_init;
+	ia64_mv_irq_init_t *irq_init;
+	ia64_mv_send_ipi_t *send_ipi;
+	ia64_mv_timer_interrupt_t *timer_interrupt;
+	ia64_mv_global_tlb_purge_t *global_tlb_purge;
+	ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
+	ia64_mv_dma_init *dma_init;
+	ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
+	ia64_mv_dma_free_coherent *dma_free_coherent;
+	ia64_mv_dma_map_single *dma_map_single;
+	ia64_mv_dma_unmap_single *dma_unmap_single;
+	ia64_mv_dma_map_sg *dma_map_sg;
+	ia64_mv_dma_unmap_sg *dma_unmap_sg;
+	ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
+	ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
+	ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
+	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
+	ia64_mv_dma_mapping_error *dma_mapping_error;
+	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_local_vector_to_irq *local_vector_to_irq;
+	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
+	ia64_mv_pci_legacy_read_t *pci_legacy_read;
+	ia64_mv_pci_legacy_write_t *pci_legacy_write;
+	ia64_mv_inb_t *inb;
+	ia64_mv_inw_t *inw;
+	ia64_mv_inl_t *inl;
+	ia64_mv_outb_t *outb;
+	ia64_mv_outw_t *outw;
+	ia64_mv_outl_t *outl;
+	ia64_mv_mmiowb_t *mmiowb;
+	ia64_mv_readb_t *readb;
+	ia64_mv_readw_t *readw;
+	ia64_mv_readl_t *readl;
+	ia64_mv_readq_t *readq;
+	ia64_mv_readb_relaxed_t *readb_relaxed;
+	ia64_mv_readw_relaxed_t *readw_relaxed;
+	ia64_mv_readl_relaxed_t *readl_relaxed;
+	ia64_mv_readq_relaxed_t *readq_relaxed;
+} __attribute__((__aligned__(16))); /* align attrib? see above comment */
+
+#define MACHVEC_INIT(name)			\
+{						\
+	#name,					\
+	platform_setup,				\
+	platform_cpu_init,			\
+	platform_irq_init,			\
+	platform_send_ipi,			\
+	platform_timer_interrupt,		\
+	platform_global_tlb_purge,		\
+	platform_tlb_migrate_finish,		\
+	platform_dma_init,			\
+	platform_dma_alloc_coherent,		\
+	platform_dma_free_coherent,		\
+	platform_dma_map_single,		\
+	platform_dma_unmap_single,		\
+	platform_dma_map_sg,			\
+	platform_dma_unmap_sg,			\
+	platform_dma_sync_single_for_cpu,	\
+	platform_dma_sync_sg_for_cpu,		\
+	platform_dma_sync_single_for_device,	\
+	platform_dma_sync_sg_for_device,	\
+	platform_dma_mapping_error,			\
+	platform_dma_supported,			\
+	platform_local_vector_to_irq,		\
+	platform_pci_get_legacy_mem,		\
+	platform_pci_legacy_read,		\
+	platform_pci_legacy_write,		\
+	platform_inb,				\
+	platform_inw,				\
+	platform_inl,				\
+	platform_outb,				\
+	platform_outw,				\
+	platform_outl,				\
+	platform_mmiowb,			\
+	platform_readb,				\
+	platform_readw,				\
+	platform_readl,				\
+	platform_readq,				\
+	platform_readb_relaxed,			\
+	platform_readw_relaxed,			\
+	platform_readl_relaxed,			\
+	platform_readq_relaxed,			\
+}
+
+extern struct ia64_machine_vector ia64_mv;
+extern void machvec_init (const char *name);
+
+# else
+#  error Unknown configuration.  Update asm-ia64/machvec.h.
+# endif /* CONFIG_IA64_GENERIC */
+
+/*
+ * Declare default routines which aren't declared anywhere else:
+ */
+extern ia64_mv_dma_init			swiotlb_init;
+extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
+extern ia64_mv_dma_map_single		swiotlb_map_single;
+extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
+extern ia64_mv_dma_map_sg		swiotlb_map_sg;
+extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
+extern ia64_mv_dma_supported		swiotlb_dma_supported;
+
+/*
+ * Define default versions so we can extend machvec for new platforms without having
+ * to update the machvec files for all existing platforms.
+ */
+#ifndef platform_setup
+# define platform_setup			machvec_setup
+#endif
+#ifndef platform_cpu_init
+# define platform_cpu_init		machvec_noop
+#endif
+#ifndef platform_irq_init
+# define platform_irq_init		machvec_noop
+#endif
+
+#ifndef platform_send_ipi
+# define platform_send_ipi		ia64_send_ipi	/* default to architected version */
+#endif
+#ifndef platform_timer_interrupt
+# define platform_timer_interrupt 	machvec_timer_interrupt
+#endif
+#ifndef platform_global_tlb_purge
+# define platform_global_tlb_purge	ia64_global_tlb_purge /* default to architected version */
+#endif
+#ifndef platform_tlb_migrate_finish
+# define platform_tlb_migrate_finish	machvec_noop_mm
+#endif
+#ifndef platform_dma_init
+# define platform_dma_init		swiotlb_init
+#endif
+#ifndef platform_dma_alloc_coherent
+# define platform_dma_alloc_coherent	swiotlb_alloc_coherent
+#endif
+#ifndef platform_dma_free_coherent
+# define platform_dma_free_coherent	swiotlb_free_coherent
+#endif
+#ifndef platform_dma_map_single
+# define platform_dma_map_single	swiotlb_map_single
+#endif
+#ifndef platform_dma_unmap_single
+# define platform_dma_unmap_single	swiotlb_unmap_single
+#endif
+#ifndef platform_dma_map_sg
+# define platform_dma_map_sg		swiotlb_map_sg
+#endif
+#ifndef platform_dma_unmap_sg
+# define platform_dma_unmap_sg		swiotlb_unmap_sg
+#endif
+#ifndef platform_dma_sync_single_for_cpu
+# define platform_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu
+#endif
+#ifndef platform_dma_sync_sg_for_cpu
+# define platform_dma_sync_sg_for_cpu		swiotlb_sync_sg_for_cpu
+#endif
+#ifndef platform_dma_sync_single_for_device
+# define platform_dma_sync_single_for_device	swiotlb_sync_single_for_device
+#endif
+#ifndef platform_dma_sync_sg_for_device
+# define platform_dma_sync_sg_for_device	swiotlb_sync_sg_for_device
+#endif
+#ifndef platform_dma_mapping_error
+# define platform_dma_mapping_error		swiotlb_dma_mapping_error
+#endif
+#ifndef platform_dma_supported
+# define  platform_dma_supported	swiotlb_dma_supported
+#endif
+#ifndef platform_local_vector_to_irq
+# define platform_local_vector_to_irq	__ia64_local_vector_to_irq
+#endif
+#ifndef platform_pci_get_legacy_mem
+# define platform_pci_get_legacy_mem	ia64_pci_get_legacy_mem
+#endif
+#ifndef platform_pci_legacy_read
+# define platform_pci_legacy_read	ia64_pci_legacy_read
+#endif
+#ifndef platform_pci_legacy_write
+# define platform_pci_legacy_write	ia64_pci_legacy_write
+#endif
+#ifndef platform_inb
+# define platform_inb		__ia64_inb
+#endif
+#ifndef platform_inw
+# define platform_inw		__ia64_inw
+#endif
+#ifndef platform_inl
+# define platform_inl		__ia64_inl
+#endif
+#ifndef platform_outb
+# define platform_outb		__ia64_outb
+#endif
+#ifndef platform_outw
+# define platform_outw		__ia64_outw
+#endif
+#ifndef platform_outl
+# define platform_outl		__ia64_outl
+#endif
+#ifndef platform_mmiowb
+# define platform_mmiowb	__ia64_mmiowb
+#endif
+#ifndef platform_readb
+# define platform_readb		__ia64_readb
+#endif
+#ifndef platform_readw
+# define platform_readw		__ia64_readw
+#endif
+#ifndef platform_readl
+# define platform_readl		__ia64_readl
+#endif
+#ifndef platform_readq
+# define platform_readq		__ia64_readq
+#endif
+#ifndef platform_readb_relaxed
+# define platform_readb_relaxed	__ia64_readb_relaxed
+#endif
+#ifndef platform_readw_relaxed
+# define platform_readw_relaxed	__ia64_readw_relaxed
+#endif
+#ifndef platform_readl_relaxed
+# define platform_readl_relaxed	__ia64_readl_relaxed
+#endif
+#ifndef platform_readq_relaxed
+# define platform_readq_relaxed	__ia64_readq_relaxed
+#endif
+
+#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/include/asm-ia64/machvec_dig.h b/include/asm-ia64/machvec_dig.h
new file mode 100644
index 000000000000..4dc8522c974f
--- /dev/null
+++ b/include/asm-ia64/machvec_dig.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_h
+#define _ASM_IA64_MACHVEC_DIG_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_irq_init_t dig_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"dig"
+#define platform_setup		dig_setup
+#define platform_irq_init	dig_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/include/asm-ia64/machvec_hpsim.h b/include/asm-ia64/machvec_hpsim.h
new file mode 100644
index 000000000000..cf72fc87fdfe
--- /dev/null
+++ b/include/asm-ia64/machvec_hpsim.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_HPSIM_h
+#define _ASM_IA64_MACHVEC_HPSIM_h
+
+extern ia64_mv_setup_t hpsim_setup;
+extern ia64_mv_irq_init_t hpsim_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"hpsim"
+#define platform_setup		hpsim_setup
+#define platform_irq_init	hpsim_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h
new file mode 100644
index 000000000000..daafe504c5f4
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_h
+#define _ASM_IA64_MACHVEC_HPZX1_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_setup_t			sba_setup;
+extern ia64_mv_dma_alloc_coherent	sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sba_free_coherent;
+extern ia64_mv_dma_map_single		sba_map_single;
+extern ia64_mv_dma_unmap_single		sba_unmap_single;
+extern ia64_mv_dma_map_sg		sba_map_sg;
+extern ia64_mv_dma_unmap_sg		sba_unmap_sg;
+extern ia64_mv_dma_supported		sba_dma_supported;
+extern ia64_mv_dma_mapping_error	sba_dma_mapping_error;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"hpzx1"
+#define platform_setup			sba_setup
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sba_alloc_coherent
+#define platform_dma_free_coherent	sba_free_coherent
+#define platform_dma_map_single		sba_map_single
+#define platform_dma_unmap_single	sba_unmap_single
+#define platform_dma_map_sg		sba_map_sg
+#define platform_dma_unmap_sg		sba_unmap_sg
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			sba_dma_supported
+#define platform_dma_mapping_error		sba_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h
new file mode 100644
index 000000000000..9924b1b00a6c
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1_swiotlb.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+
+extern ia64_mv_setup_t				dig_setup;
+extern ia64_mv_dma_init				hwsw_init;
+extern ia64_mv_dma_alloc_coherent		hwsw_alloc_coherent;
+extern ia64_mv_dma_free_coherent		hwsw_free_coherent;
+extern ia64_mv_dma_map_single			hwsw_map_single;
+extern ia64_mv_dma_unmap_single			hwsw_unmap_single;
+extern ia64_mv_dma_map_sg			hwsw_map_sg;
+extern ia64_mv_dma_unmap_sg			hwsw_unmap_sg;
+extern ia64_mv_dma_supported			hwsw_dma_supported;
+extern ia64_mv_dma_mapping_error		hwsw_dma_mapping_error;
+extern ia64_mv_dma_sync_single_for_cpu		hwsw_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device	hwsw_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device		hwsw_sync_sg_for_device;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1_swiotlb"
+
+#define platform_setup				dig_setup
+#define platform_dma_init			hwsw_init
+#define platform_dma_alloc_coherent		hwsw_alloc_coherent
+#define platform_dma_free_coherent		hwsw_free_coherent
+#define platform_dma_map_single			hwsw_map_single
+#define platform_dma_unmap_single		hwsw_unmap_single
+#define platform_dma_map_sg			hwsw_map_sg
+#define platform_dma_unmap_sg			hwsw_unmap_sg
+#define platform_dma_supported			hwsw_dma_supported
+#define platform_dma_mapping_error		hwsw_dma_mapping_error
+#define platform_dma_sync_single_for_cpu	hwsw_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device	hwsw_sync_single_for_device
+#define platform_dma_sync_sg_for_device		hwsw_sync_sg_for_device
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/include/asm-ia64/machvec_init.h b/include/asm-ia64/machvec_init.h
new file mode 100644
index 000000000000..2d36f6840f0b
--- /dev/null
+++ b/include/asm-ia64/machvec_init.h
@@ -0,0 +1,32 @@
+#include <asm/machvec.h>
+
+extern ia64_mv_send_ipi_t ia64_send_ipi;
+extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
+
+extern ia64_mv_inb_t __ia64_inb;
+extern ia64_mv_inw_t __ia64_inw;
+extern ia64_mv_inl_t __ia64_inl;
+extern ia64_mv_outb_t __ia64_outb;
+extern ia64_mv_outw_t __ia64_outw;
+extern ia64_mv_outl_t __ia64_outl;
+extern ia64_mv_mmiowb_t __ia64_mmiowb;
+extern ia64_mv_readb_t __ia64_readb;
+extern ia64_mv_readw_t __ia64_readw;
+extern ia64_mv_readl_t __ia64_readl;
+extern ia64_mv_readq_t __ia64_readq;
+extern ia64_mv_readb_t __ia64_readb_relaxed;
+extern ia64_mv_readw_t __ia64_readw_relaxed;
+extern ia64_mv_readl_t __ia64_readl_relaxed;
+extern ia64_mv_readq_t __ia64_readq_relaxed;
+
+#define MACHVEC_HELPER(name)									\
+ struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
+	= MACHVEC_INIT(name);
+
+#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
+
+MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h
new file mode 100644
index 000000000000..e1b6cd63f49e
--- /dev/null
+++ b/include/asm-ia64/machvec_sn2.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2002-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it 
+ * under the terms of version 2 of the GNU General Public License 
+ * as published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it would be useful, but 
+ * WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+ * 
+ * Further, this software is distributed without any warranty that it is 
+ * free of the rightful claim of any third person regarding infringement 
+ * or the like.  Any license provided herein, whether implied or 
+ * otherwise, applies only to this software file.  Patent licenses, if 
+ * any, provided herein do not apply to combinations of this program with 
+ * other software, or any other product whatsoever.
+ * 
+ * You should have received a copy of the GNU General Public 
+ * License along with this program; if not, write the Free Software 
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * 
+ * Contact information:  Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, 
+ * Mountain View, CA  94043, or:
+ * 
+ * http://www.sgi.com 
+ * 
+ * For further information regarding this notice, see: 
+ * 
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#ifndef _ASM_IA64_MACHVEC_SN2_H
+#define _ASM_IA64_MACHVEC_SN2_H
+
+extern ia64_mv_setup_t sn_setup;
+extern ia64_mv_cpu_init_t sn_cpu_init;
+extern ia64_mv_irq_init_t sn_irq_init;
+extern ia64_mv_send_ipi_t sn2_send_IPI;
+extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
+extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
+extern ia64_mv_tlb_migrate_finish_t	sn_tlb_migrate_finish;
+extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
+extern ia64_mv_inb_t __sn_inb;
+extern ia64_mv_inw_t __sn_inw;
+extern ia64_mv_inl_t __sn_inl;
+extern ia64_mv_outb_t __sn_outb;
+extern ia64_mv_outw_t __sn_outw;
+extern ia64_mv_outl_t __sn_outl;
+extern ia64_mv_mmiowb_t __sn_mmiowb;
+extern ia64_mv_readb_t __sn_readb;
+extern ia64_mv_readw_t __sn_readw;
+extern ia64_mv_readl_t __sn_readl;
+extern ia64_mv_readq_t __sn_readq;
+extern ia64_mv_readb_t __sn_readb_relaxed;
+extern ia64_mv_readw_t __sn_readw_relaxed;
+extern ia64_mv_readl_t __sn_readl_relaxed;
+extern ia64_mv_readq_t __sn_readq_relaxed;
+extern ia64_mv_dma_alloc_coherent	sn_dma_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sn_dma_free_coherent;
+extern ia64_mv_dma_map_single		sn_dma_map_single;
+extern ia64_mv_dma_unmap_single		sn_dma_unmap_single;
+extern ia64_mv_dma_map_sg		sn_dma_map_sg;
+extern ia64_mv_dma_unmap_sg		sn_dma_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu	sn_dma_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
+extern ia64_mv_dma_supported		sn_dma_supported;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"sn2"
+#define platform_setup			sn_setup
+#define platform_cpu_init		sn_cpu_init
+#define platform_irq_init		sn_irq_init
+#define platform_send_ipi		sn2_send_IPI
+#define platform_timer_interrupt	sn_timer_interrupt
+#define platform_global_tlb_purge       sn2_global_tlb_purge
+#define platform_tlb_migrate_finish	sn_tlb_migrate_finish
+#define platform_pci_fixup		sn_pci_fixup
+#define platform_inb			__sn_inb
+#define platform_inw			__sn_inw
+#define platform_inl			__sn_inl
+#define platform_outb			__sn_outb
+#define platform_outw			__sn_outw
+#define platform_outl			__sn_outl
+#define platform_mmiowb			__sn_mmiowb
+#define platform_readb			__sn_readb
+#define platform_readw			__sn_readw
+#define platform_readl			__sn_readl
+#define platform_readq			__sn_readq
+#define platform_readb_relaxed		__sn_readb_relaxed
+#define platform_readw_relaxed		__sn_readw_relaxed
+#define platform_readl_relaxed		__sn_readl_relaxed
+#define platform_readq_relaxed		__sn_readq_relaxed
+#define platform_local_vector_to_irq	sn_local_vector_to_irq
+#define platform_pci_get_legacy_mem	sn_pci_get_legacy_mem
+#define platform_pci_legacy_read	sn_pci_legacy_read
+#define platform_pci_legacy_write	sn_pci_legacy_write
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sn_dma_alloc_coherent
+#define platform_dma_free_coherent	sn_dma_free_coherent
+#define platform_dma_map_single		sn_dma_map_single
+#define platform_dma_unmap_single	sn_dma_unmap_single
+#define platform_dma_map_sg		sn_dma_map_sg
+#define platform_dma_unmap_sg		sn_dma_unmap_sg
+#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
+#define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
+#define platform_dma_mapping_error		sn_dma_mapping_error
+#define platform_dma_supported		sn_dma_supported
+
+#include <asm/sn/io.h>
+
+#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/include/asm-ia64/mc146818rtc.h b/include/asm-ia64/mc146818rtc.h
new file mode 100644
index 000000000000..407787a237ba
--- /dev/null
+++ b/include/asm-ia64/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_MC146818RTC_H
+#define _ASM_IA64_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
new file mode 100644
index 000000000000..149ad0118455
--- /dev/null
+++ b/include/asm-ia64/mca.h
@@ -0,0 +1,132 @@
+/*
+ * File:	mca.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
+ * Copyright (C) Russ Anderson (rja@sgi.com)
+ */
+
+#ifndef _ASM_IA64_MCA_H
+#define _ASM_IA64_MCA_H
+
+#define IA64_MCA_STACK_SIZE	8192
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/sal.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+
+#define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
+
+typedef struct ia64_fptr {
+	unsigned long fp;
+	unsigned long gp;
+} ia64_fptr_t;
+
+typedef union cmcv_reg_u {
+	u64	cmcv_regval;
+	struct	{
+		u64	cmcr_vector		: 8;
+		u64	cmcr_reserved1		: 4;
+		u64	cmcr_ignored1		: 1;
+		u64	cmcr_reserved2		: 3;
+		u64	cmcr_mask		: 1;
+		u64	cmcr_ignored2		: 47;
+	} cmcv_reg_s;
+
+} cmcv_reg_t;
+
+#define cmcv_mask		cmcv_reg_s.cmcr_mask
+#define cmcv_vector		cmcv_reg_s.cmcr_vector
+
+enum {
+	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
+	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1
+};
+
+/* Information maintained by the MC infrastructure */
+typedef struct ia64_mc_info_s {
+	u64		imi_mca_handler;
+	size_t		imi_mca_handler_size;
+	u64		imi_monarch_init_handler;
+	size_t		imi_monarch_init_handler_size;
+	u64		imi_slave_init_handler;
+	size_t		imi_slave_init_handler_size;
+	u8		imi_rendez_checkin[NR_CPUS];
+
+} ia64_mc_info_t;
+
+typedef struct ia64_mca_sal_to_os_state_s {
+	u64		imsto_os_gp;		/* GP of the os registered with the SAL */
+	u64		imsto_pal_proc;		/* PAL_PROC entry point - physical addr */
+	u64		imsto_sal_proc;		/* SAL_PROC entry point - physical addr */
+	u64		imsto_sal_gp;		/* GP of the SAL - physical */
+	u64		imsto_rendez_state;	/* Rendez state information */
+	u64		imsto_sal_check_ra;	/* Return address in SAL_CHECK while going
+						 * back to SAL from OS after MCA handling.
+						 */
+	u64		pal_min_state;		/* from PAL in r17 */
+	u64		proc_state_param;	/* from PAL in r18. See SDV 2:268 11.3.2.1 */
+} ia64_mca_sal_to_os_state_t;
+
+enum {
+	IA64_MCA_CORRECTED	=	0x0,	/* Error has been corrected by OS_MCA */
+	IA64_MCA_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+	IA64_MCA_COLD_BOOT	=	-2,	/* Cold boot of the system need from SAL */
+	IA64_MCA_HALT		=	-3	/* System to be halted by SAL */
+};
+
+enum {
+	IA64_MCA_SAME_CONTEXT	=	0x0,	/* SAL to return to same context */
+	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
+};
+
+typedef struct ia64_mca_os_to_sal_state_s {
+	u64		imots_os_status;	/*   OS status to SAL as to what happened
+						 *   with the MCA handling.
+						 */
+	u64		imots_sal_gp;		/* GP of the SAL - physical */
+	u64		imots_context;		/* 0 if return to same context
+						   1 if return to new context */
+	u64		*imots_new_min_state;	/* Pointer to structure containing
+						 * new values of registers in the min state
+						 * save area.
+						 */
+	u64		imots_sal_check_ra;	/* Return address in SAL_CHECK while going
+						 * back to SAL from OS after MCA handling.
+						 */
+} ia64_mca_os_to_sal_state_t;
+
+/* Per-CPU MCA state that is too big for normal per-CPU variables.  */
+
+struct ia64_mca_cpu {
+	u64 stack[IA64_MCA_STACK_SIZE/8];	/* MCA memory-stack */
+	u64 proc_state_dump[512];
+	u64 stackframe[32];
+	u64 rbstore[IA64_MCA_STACK_SIZE/8];	/* MCA reg.-backing store */
+	u64 init_stack[KERNEL_STACK_SIZE/8];
+} __attribute__ ((aligned(16)));
+
+/* Array of physical addresses of each CPU's MCA area.  */
+extern unsigned long __per_cpu_mca[NR_CPUS];
+
+extern void ia64_mca_init(void);
+extern void ia64_mca_cpu_init(void *);
+extern void ia64_os_mca_dispatch(void);
+extern void ia64_os_mca_dispatch_end(void);
+extern void ia64_mca_ucmc_handler(void);
+extern void ia64_monarch_init_handler(void);
+extern void ia64_slave_init_handler(void);
+extern void ia64_mca_cmc_vector_setup(void);
+extern int  ia64_reg_MCA_extension(void*);
+extern void ia64_unreg_MCA_extension(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_MCA_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
new file mode 100644
index 000000000000..836953e0f91f
--- /dev/null
+++ b/include/asm-ia64/mca_asm.h
@@ -0,0 +1,312 @@
+/*
+ * File:	mca_asm.h
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) 2000 Hewlett-Packard Co.
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ */
+#ifndef _ASM_IA64_MCA_ASM_H
+#define _ASM_IA64_MCA_ASM_H
+
+#define PSR_IC		13
+#define PSR_I		14
+#define	PSR_DT		17
+#define PSR_RT		27
+#define PSR_MC		35
+#define PSR_IT		36
+#define PSR_BN		44
+
+/*
+ * This macro converts a instruction virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define INST_VA_TO_PA(addr)							\
+	dep	addr	= 0, addr, 61, 3
+/*
+ * This macro converts a data virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define DATA_VA_TO_PA(addr)							\
+	tpa	addr	= addr
+/*
+ * This macro converts a data physical address to a virtual address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Put 0x7 in bits 61 thru 63.
+ */
+#define DATA_PA_TO_VA(addr,temp)							\
+	mov	temp	= 0x7	;;							\
+	dep	addr	= temp, addr, 61, 3
+
+#define GET_THIS_PADDR(reg, var)		\
+	mov	reg = IA64_KR(PER_CPU_DATA);;	\
+        addl	reg = THIS_CPU(var), reg
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in physical mode with all the address
+ * translations turned off.
+ *	1.	Save the current psr
+ *	2.	Make sure that all the upper 32 bits are off
+ *
+ *	3.	Clear the interrupt enable and interrupt state collection bits
+ *		in the psr before updating the ipsr and iip.
+ *
+ *	4.	Turn off the instruction, data and rse translation bits of the psr
+ *		and store the new value into ipsr
+ *		Also make sure that the interrupts are disabled.
+ *		Ensure that we are in little endian mode.
+ *		[psr.{rt, it, dt, i, be} = 0]
+ *
+ *	5.	Get the physical address corresponding to the virtual address
+ *		of the next instruction bundle and put it in iip.
+ *		(Using magic numbers 24 and 40 in the deposint instruction since
+ *		 the IA64_SDK code directly maps to lower 24bits as physical address
+ *		 from a virtual address).
+ *
+ *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
+ */
+#define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
+	mov	old_psr = psr;								\
+	;;										\
+	dep	old_psr = 0, old_psr, 32, 32;						\
+											\
+	mov	ar.rsc = 0 ;								\
+	;;										\
+	srlz.d;										\
+	mov	temp2 = ar.bspstore;							\
+	;;										\
+	DATA_VA_TO_PA(temp2);								\
+	;;										\
+	mov	temp1 = ar.rnat;							\
+	;;										\
+	mov	ar.bspstore = temp2;							\
+	;;										\
+	mov	ar.rnat = temp1;							\
+	mov	temp1 = psr;								\
+	mov	temp2 = psr;								\
+	;;										\
+											\
+	dep	temp2 = 0, temp2, PSR_IC, 2;						\
+	;;										\
+	mov	psr.l = temp2;								\
+	;;										\
+	srlz.d;										\
+	dep	temp1 = 0, temp1, 32, 32;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_DT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_RT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_I, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IC, 1;						\
+	;;										\
+	dep	temp1 = -1, temp1, PSR_MC, 1;						\
+	;;										\
+	mov	cr.ipsr = temp1;							\
+	;;										\
+	LOAD_PHYSICAL(p0, temp2, start_addr);						\
+	;;										\
+	mov	cr.iip = temp2;								\
+	mov	cr.ifs = r0;								\
+	DATA_VA_TO_PA(sp);								\
+	DATA_VA_TO_PA(gp);								\
+	;;										\
+	srlz.i;										\
+	;;										\
+	nop	1;									\
+	nop	2;									\
+	nop	1;									\
+	nop	2;									\
+	rfi;										\
+	;;
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in virtual mode with all the address
+ * translations turned on.
+ *	1.	Get the old saved psr
+ *
+ *	2.	Clear the interrupt state collection bit in the current psr.
+ *
+ *	3.	Set the instruction translation bit back in the old psr
+ *		Note we have to do this since we are right now saving only the
+ *		lower 32-bits of old psr.(Also the old psr has the data and
+ *		rse translation bits on)
+ *
+ *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
+ *
+ *	5.	Reset the current thread pointer (r13).
+ *
+ *	6.	Set iip to the virtual address of the next instruction bundle.
+ *
+ *	7.	Do an rfi to move ipsr to psr and iip to ip.
+ */
+
+#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
+	mov	temp2 = psr;					\
+	;;							\
+	mov	old_psr = temp2;				\
+	;;							\
+	dep	temp2 = 0, temp2, PSR_IC, 2;			\
+	;;							\
+	mov	psr.l = temp2;					\
+	mov	ar.rsc = 0;					\
+	;;							\
+	srlz.d;							\
+	mov	r13 = ar.k6;					\
+	mov	temp2 = ar.bspstore;				\
+	;;							\
+	DATA_PA_TO_VA(temp2,temp1);				\
+	;;							\
+	mov	temp1 = ar.rnat;				\
+	;;							\
+	mov	ar.bspstore = temp2;				\
+	;;							\
+	mov	ar.rnat = temp1;				\
+	;;							\
+	mov	temp1 = old_psr;				\
+	;;							\
+	mov	temp2 = 1;					\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
+	;;							\
+								\
+	mov     cr.ipsr = temp1;				\
+	movl	temp2 = start_addr;				\
+	;;							\
+	mov	cr.iip = temp2;					\
+	;;							\
+	DATA_PA_TO_VA(sp, temp1);				\
+	DATA_PA_TO_VA(gp, temp2);				\
+	srlz.i;							\
+	;;							\
+	nop	1;						\
+	nop	2;						\
+	nop	1;						\
+	rfi							\
+	;;
+
+/*
+ * The following offsets capture the order in which the
+ * RSE related registers from the old context are
+ * saved onto the new stack frame.
+ *
+ *	+-----------------------+
+ *	|NDIRTY [BSP - BSPSTORE]|
+ *	+-----------------------+
+ *	|	RNAT		|
+ *	+-----------------------+
+ *	|	BSPSTORE	|
+ *	+-----------------------+
+ *	|	IFS		|
+ *	+-----------------------+
+ *	|	PFS		|
+ *	+-----------------------+
+ *	|	RSC		|
+ *	+-----------------------+ <-------- Bottom of new stack frame
+ */
+#define  rse_rsc_offset		0
+#define  rse_pfs_offset		(rse_rsc_offset+0x08)
+#define  rse_ifs_offset		(rse_pfs_offset+0x08)
+#define  rse_bspstore_offset	(rse_ifs_offset+0x08)
+#define  rse_rnat_offset	(rse_bspstore_offset+0x08)
+#define  rse_ndirty_offset	(rse_rnat_offset+0x08)
+
+/*
+ * rse_switch_context
+ *
+ *	1. Save old RSC onto the new stack frame
+ *	2. Save PFS onto new stack frame
+ *	3. Cover the old frame and start a new frame.
+ *	4. Save IFS onto new stack frame
+ *	5. Save the old BSPSTORE on the new stack frame
+ *	6. Save the old RNAT on the new stack frame
+ *	7. Write BSPSTORE with the new backing store pointer
+ *	8. Read and save the new BSP to calculate the #dirty registers
+ * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
+ */
+#define rse_switch_context(temp,p_stackframe,p_bspstore)			\
+	;;									\
+	mov     temp=ar.rsc;;							\
+	st8     [p_stackframe]=temp,8;;					\
+	mov     temp=ar.pfs;;							\
+	st8     [p_stackframe]=temp,8;						\
+	cover ;;								\
+	mov     temp=cr.ifs;;							\
+	st8     [p_stackframe]=temp,8;;						\
+	mov     temp=ar.bspstore;;						\
+	st8     [p_stackframe]=temp,8;;					\
+	mov     temp=ar.rnat;;							\
+	st8     [p_stackframe]=temp,8;						\
+	mov     ar.bspstore=p_bspstore;;					\
+	mov     temp=ar.bsp;;							\
+	sub     temp=temp,p_bspstore;;						\
+	st8     [p_stackframe]=temp,8;;
+
+/*
+ * rse_return_context
+ *	1. Allocate a zero-sized frame
+ *	2. Store the number of dirty registers RSC.loadrs field
+ *	3. Issue a loadrs to insure that any registers from the interrupted
+ *	   context which were saved on the new stack frame have been loaded
+ *	   back into the stacked registers
+ *	4. Restore BSPSTORE
+ *	5. Restore RNAT
+ *	6. Restore PFS
+ *	7. Restore IFS
+ *	8. Restore RSC
+ *	9. Issue an RFI
+ */
+#define rse_return_context(psr_mask_reg,temp,p_stackframe)			\
+	;;									\
+	alloc   temp=ar.pfs,0,0,0,0;						\
+	add     p_stackframe=rse_ndirty_offset,p_stackframe;;			\
+	ld8     temp=[p_stackframe];;						\
+	shl     temp=temp,16;;							\
+	mov     ar.rsc=temp;;							\
+	loadrs;;								\
+	add     p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.bspstore=temp;;						\
+	add     p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.rnat=temp;;							\
+	add     p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.pfs=temp;;							\
+	add     p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     cr.ifs=temp;;							\
+	add     p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.rsc=temp ;							\
+	mov     temp=psr;;							\
+	or      temp=temp,psr_mask_reg;;					\
+	mov     cr.ipsr=temp;;							\
+	mov     temp=ip;;							\
+	add     temp=0x30,temp;;						\
+	mov     cr.iip=temp;;							\
+	srlz.i;;								\
+	rfi;;
+
+#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
new file mode 100644
index 000000000000..1590dc65b30b
--- /dev/null
+++ b/include/asm-ia64/meminit.h
@@ -0,0 +1,60 @@
+#ifndef meminit_h
+#define meminit_h
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Entries defined so far:
+ * 	- boot param structure itself
+ * 	- memory map
+ * 	- initrd (optional)
+ * 	- command line string
+ * 	- kernel code & data
+ *
+ * More could be added if necessary
+ */
+#define IA64_MAX_RSVD_REGIONS 5
+
+struct rsvd_region {
+	unsigned long start;	/* virtual address of beginning of element */
+	unsigned long end;	/* virtual address of end of element + 1 */
+};
+
+extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
+extern int num_rsvd_regions;
+
+extern void find_memory (void);
+extern void reserve_memory (void);
+extern void find_initrd (void);
+extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+
+/*
+ * For rounding an address to the next IA64_GRANULE_SIZE or order
+ */
+#define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
+#define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
+#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
+
+#ifdef CONFIG_DISCONTIGMEM
+  extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
+#else
+# define call_pernode_memory(start, len, func)	(*func)(start, len, 0)
+#endif
+
+#define IGNORE_PFN0	1	/* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
+  extern unsigned long vmalloc_end;
+  extern struct page *vmem_map;
+  extern int find_largest_hole (u64 start, u64 end, void *arg);
+  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+#endif
+
+#endif /* meminit_h */
diff --git a/include/asm-ia64/mman.h b/include/asm-ia64/mman.h
new file mode 100644
index 000000000000..1c0a73af1461
--- /dev/null
+++ b/include/asm-ia64/mman.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
+
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
+#define MAP_GROWSUP	0x00200		/* register stack-like segment */
+#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
+#define MAP_LOCKED	0x02000		/* pages are locked */
+#define MAP_NORESERVE	0x04000		/* don't check for reservations */
+#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* _ASM_IA64_MMAN_H */
diff --git a/include/asm-ia64/mmu.h b/include/asm-ia64/mmu.h
new file mode 100644
index 000000000000..ae1525352a25
--- /dev/null
+++ b/include/asm-ia64/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Type for a context number.  We declare it volatile to ensure proper ordering when it's
+ * accessed outside of spinlock'd critical sections (e.g., as done in activate_mm() and
+ * init_new_context()).
+ */
+typedef volatile unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h
new file mode 100644
index 000000000000..0096e7e05012
--- /dev/null
+++ b/include/asm-ia64/mmu_context.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_IA64_MMU_CONTEXT_H
+#define _ASM_IA64_MMU_CONTEXT_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * Routines to manage the allocation of task context numbers.  Task context numbers are
+ * used to reduce or eliminate the need to perform TLB flushes due to context switches.
+ * Context numbers are implemented using ia-64 region ids.  Since the IA-64 TLB does not
+ * consider the region number when performing a TLB lookup, we need to assign a unique
+ * region id to each region in a process.  We use the least significant three bits in a
+ * region id for this purpose.
+ */
+
+#define IA64_REGION_ID_KERNEL	0 /* the kernel's region id (tlb.c depends on this being 0) */
+
+#define ia64_rid(ctx,addr)	(((ctx) << 3) | (addr >> 61))
+
+# ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+
+struct ia64_ctx {
+	spinlock_t lock;
+	unsigned int next;	/* next context number to use */
+	unsigned int limit;	/* next >= limit => must call wrap_mmu_context() */
+	unsigned int max_ctx;	/* max. context value supported by all CPUs */
+};
+
+extern struct ia64_ctx ia64_ctx;
+DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
+
+extern void wrap_mmu_context (struct mm_struct *mm);
+
+static inline void
+enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * When the context counter wraps around all TLBs need to be flushed because an old
+ * context number might have been reused. This is signalled by the ia64_need_tlb_flush
+ * per-CPU variable, which is checked in the routine below. Called by activate_mm().
+ * <efocht@ess.nec.de>
+ */
+static inline void
+delayed_tlb_flush (void)
+{
+	extern void local_flush_tlb_all (void);
+
+	if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
+		local_flush_tlb_all();
+		__ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
+	}
+}
+
+static inline mm_context_t
+get_mmu_context (struct mm_struct *mm)
+{
+	unsigned long flags;
+	mm_context_t context = mm->context;
+
+	if (context)
+		return context;
+
+	spin_lock_irqsave(&ia64_ctx.lock, flags);
+	{
+		/* re-check, now that we've got the lock: */
+		context = mm->context;
+		if (context == 0) {
+			cpus_clear(mm->cpu_vm_mask);
+			if (ia64_ctx.next >= ia64_ctx.limit)
+				wrap_mmu_context(mm);
+			mm->context = context = ia64_ctx.next++;
+		}
+	}
+	spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+	return context;
+}
+
+/*
+ * Initialize context number to some sane value.  MM is guaranteed to be a brand-new
+ * address-space, so no TLB flushing is needed, ever.
+ */
+static inline int
+init_new_context (struct task_struct *p, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void
+destroy_context (struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+reload_context (mm_context_t context)
+{
+	unsigned long rid;
+	unsigned long rid_incr = 0;
+	unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
+
+	old_rr4 = ia64_get_rr(0x8000000000000000UL);
+	rid = context << 3;	/* make space for encoding the region number */
+	rid_incr = 1 << 8;
+
+	/* encode the region id, preferred page size, and VHPT enable bit: */
+	rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
+	rr1 = rr0 + 1*rid_incr;
+	rr2 = rr0 + 2*rid_incr;
+	rr3 = rr0 + 3*rid_incr;
+	rr4 = rr0 + 4*rid_incr;
+#ifdef  CONFIG_HUGETLB_PAGE
+	rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
+#endif
+
+	ia64_set_rr(0x0000000000000000UL, rr0);
+	ia64_set_rr(0x2000000000000000UL, rr1);
+	ia64_set_rr(0x4000000000000000UL, rr2);
+	ia64_set_rr(0x6000000000000000UL, rr3);
+	ia64_set_rr(0x8000000000000000UL, rr4);
+	ia64_srlz_i();			/* srlz.i implies srlz.d */
+}
+
+static inline void
+activate_context (struct mm_struct *mm)
+{
+	mm_context_t context;
+
+	do {
+		context = get_mmu_context(mm);
+		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+		reload_context(context);
+		/* in the unlikely event of a TLB-flush by another thread, redo the load: */
+	} while (unlikely(context != mm->context));
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * Switch from address space PREV to address space NEXT.
+ */
+static inline void
+activate_mm (struct mm_struct *prev, struct mm_struct *next)
+{
+	delayed_tlb_flush();
+
+	/*
+	 * We may get interrupts here, but that's OK because interrupt handlers cannot
+	 * touch user-space.
+	 */
+	ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
+	activate_context(next);
+}
+
+#define switch_mm(prev_mm,next_mm,next_task)	activate_mm(prev_mm, next_mm)
+
+# endif /* ! __ASSEMBLY__ */
+#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
new file mode 100644
index 000000000000..9491dacc89cf
--- /dev/null
+++ b/include/asm-ia64/mmzone.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000,2003 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_MMZONE_H
+#define _ASM_IA64_MMZONE_H
+
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/meminit.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#ifdef CONFIG_IA64_DIG /* DIG systems are small */
+# define MAX_PHYSNODE_ID	8
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
+#else /* sn2 is the biggest case, so we use that if !DIG */
+# define MAX_PHYSNODE_ID	2048
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif
+
+#else /* CONFIG_DISCONTIGMEM */
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_MMZONE_H */
diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h
new file mode 100644
index 000000000000..85c82bd819f2
--- /dev/null
+++ b/include/asm-ia64/module.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_MODULE_H
+#define _ASM_IA64_MODULE_H
+
+/*
+ * IA-64-specific support for kernel module loader.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+struct elf64_shdr;			/* forward declration */
+
+struct mod_arch_specific {
+	struct elf64_shdr *core_plt;	/* core PLT section */
+	struct elf64_shdr *init_plt;	/* init PLT section */
+	struct elf64_shdr *got;		/* global offset table */
+	struct elf64_shdr *opd;		/* official procedure descriptors */
+	struct elf64_shdr *unwind;	/* unwind-table section */
+	unsigned long gp;		/* global-pointer for module */
+
+	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
+	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
+	unsigned int next_got_entry;	/* index of next available got entry */
+};
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+
+#define MODULE_PROC_FAMILY	"ia64"
+#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY
+
+#define ARCH_SHF_SMALL	SHF_IA_64_SHORT
+
+#endif /* _ASM_IA64_MODULE_H */
diff --git a/include/asm-ia64/msgbuf.h b/include/asm-ia64/msgbuf.h
new file mode 100644
index 000000000000..6c64c0d2aae1
--- /dev/null
+++ b/include/asm-ia64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_MSGBUF_H
+#define _ASM_IA64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/include/asm-ia64/msi.h b/include/asm-ia64/msi.h
new file mode 100644
index 000000000000..60f2137f9278
--- /dev/null
+++ b/include/asm-ia64/msi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2003-2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef ASM_MSI_H
+#define ASM_MSI_H
+
+#define NR_VECTORS		NR_IRQS
+#define FIRST_DEVICE_VECTOR 	IA64_FIRST_DEVICE_VECTOR
+#define LAST_DEVICE_VECTOR	IA64_LAST_DEVICE_VECTOR
+static inline void set_intr_gate (int nr, void *func) {}
+#define IO_APIC_VECTOR(irq)	(irq)
+#define ack_APIC_irq		ia64_eoi
+#define cpu_mask_to_apicid(mask) cpu_physical_id(first_cpu(mask))
+#define MSI_DEST_MODE		MSI_PHYSICAL_MODE
+#define MSI_TARGET_CPU	((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#define MSI_TARGET_CPU_SHIFT	4
+
+#endif /* ASM_MSI_H */
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
new file mode 100644
index 000000000000..78e768079083
--- /dev/null
+++ b/include/asm-ia64/namei.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_NAMEI_H
+#define _ASM_IA64_NAMEI_H
+
+/*
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
+
+static inline char *
+__emul_prefix (void)
+{
+	switch (current->personality) {
+	      case PER_LINUX32:
+		return EMUL_PREFIX_LINUX_IA32;
+	      default:
+		return NULL;
+	}
+}
+
+#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h
new file mode 100644
index 000000000000..6b0f3ed89b7e
--- /dev/null
+++ b/include/asm-ia64/nodedata.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_NODEDATA_H
+#define _ASM_IA64_NODEDATA_H
+
+#include <linux/config.h>
+#include <linux/numa.h>
+
+#include <asm/percpu.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Node Data. One of these structures is located on each node of a NUMA system.
+ */
+
+struct pglist_data;
+struct ia64_node_data {
+	short			active_cpu_count;
+	short			node;
+	struct pglist_data	*pg_data_ptrs[MAX_NUMNODES];
+};
+
+
+/*
+ * Return a pointer to the node_data structure for the executing cpu.
+ */
+#define local_node_data		(local_cpu_data->node_data)
+
+/*
+ * Given a node id, return a pointer to the pg_data_t for the node.
+ *
+ * NODE_DATA 	- should be used in all code not related to system
+ *		  initialization. It uses pernode data structures to minimize
+ *		  offnode memory references. However, these structure are not 
+ *		  present during boot. This macro can be used once cpu_init
+ *		  completes.
+ */
+#define NODE_DATA(nid)		(local_node_data->pg_data_ptrs[nid])
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
new file mode 100644
index 000000000000..3ae128fe0823
--- /dev/null
+++ b/include/asm-ia64/numa.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains NUMA specific prototypes and definitions.
+ *
+ * 2002/08/05 Erich Focht <efocht@ess.nec.de>
+ *
+ */
+#ifndef _ASM_IA64_NUMA_H
+#define _ASM_IA64_NUMA_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/mmzone.h>
+
+extern u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+
+/* Stuff below this line could be architecture independent */
+
+extern int num_node_memblks;		/* total number of memory chunks */
+
+/*
+ * List of node memory chunks. Filled when parsing SRAT table to
+ * obtain information about memory nodes.
+*/
+
+struct node_memblk_s {
+	unsigned long start_paddr;
+	unsigned long size;
+	int nid;		/* which logical node contains this chunk? */
+	int bank;		/* which mem bank on this node */
+};
+
+struct node_cpuid_s {
+	u16	phys_id;	/* id << 8 | eid */
+	int	nid;		/* logical node containing this CPU */
+};
+
+extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
+extern struct node_cpuid_s node_cpuid[NR_CPUS];
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ *
+ * This is a matrix with "distances" between nodes, they should be
+ * proportional to the memory access latency ratios.
+ */
+
+extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
+#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+
+extern int paddr_to_nid(unsigned long paddr);
+
+#define local_nodeid (cpu_to_node_map[smp_processor_id()])
+
+#else /* !CONFIG_NUMA */
+
+#define paddr_to_nid(addr)	0
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NUMA_H */
diff --git a/include/asm-ia64/numnodes.h b/include/asm-ia64/numnodes.h
new file mode 100644
index 000000000000..21cff4da5485
--- /dev/null
+++ b/include/asm-ia64/numnodes.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+#ifdef CONFIG_IA64_DIG
+/* Max 8 Nodes */
+#define NODES_SHIFT	3
+#elif defined(CONFIG_IA64_HP_ZX1) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+/* Max 32 Nodes */
+#define NODES_SHIFT	5
+#elif defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+/* Max 256 Nodes */
+#define NODES_SHIFT	8
+#endif
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
new file mode 100644
index 000000000000..24aab801a8ca
--- /dev/null
+++ b/include/asm-ia64/page.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_PAGE_H
+#define _ASM_IA64_PAGE_H
+/*
+ * Pagetable related stuff.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/types.h>
+
+/*
+ * PAGE_SHIFT determines the actual kernel page size.
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error Unsupported page size!
+#endif
+
+#define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE - 1))
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
+
+#define RGN_MAP_LIMIT	((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE)	/* per region addr limit */
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define REGION_HPAGE		(4UL)	/* note: this is hardcoded in reload_context()!*/
+# define REGION_SHIFT		61
+# define HPAGE_REGION_BASE	(REGION_HPAGE << REGION_SHIFT)
+# define HPAGE_SHIFT		hpage_shift
+# define HPAGE_SHIFT_DEFAULT	28	/* check ia64 SDM for architecture supported size */
+# define HPAGE_SIZE		(__IA64_UL_CONST(1) << HPAGE_SHIFT)
+# define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
+# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+# define ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef __ASSEMBLY__
+# define __pa(x)		((x) - PAGE_OFFSET)
+# define __va(x)		((x) + PAGE_OFFSET)
+#else /* !__ASSEMBLY */
+# ifdef __KERNEL__
+#  define STRICT_MM_TYPECHECKS
+
+extern void clear_page (void *page);
+extern void copy_page (void *to, void *from);
+
+/*
+ * clear_user_page() and copy_user_page() can't be inline functions because
+ * flush_dcache_page() can't be defined until later...
+ */
+#define clear_user_page(addr, vaddr, page)	\
+do {						\
+	clear_page(addr);			\
+	flush_dcache_page(page);		\
+} while (0)
+
+#define copy_user_page(to, from, vaddr, page)	\
+do {						\
+	copy_page((to), (from));		\
+	flush_dcache_page(page);		\
+} while (0)
+
+
+#define alloc_zeroed_user_highpage(vma, vaddr) \
+({						\
+	struct page *page = alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr); \
+	if (page)				\
+ 		flush_dcache_page(page);	\
+	page;					\
+})
+
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern int ia64_pfn_valid (unsigned long pfn);
+#else
+# define ia64_pfn_valid(pfn) 1
+#endif
+
+#ifndef CONFIG_DISCONTIGMEM
+# define pfn_valid(pfn)		(((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page)	((unsigned long) (page - mem_map))
+# define pfn_to_page(pfn)	(mem_map + (pfn))
+#else
+extern struct page *vmem_map;
+extern unsigned long max_low_pfn;
+# define pfn_valid(pfn)		(((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page)	((unsigned long) (page - vmem_map))
+# define pfn_to_page(pfn)	(vmem_map + (pfn))
+#endif
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+typedef union ia64_va {
+	struct {
+		unsigned long off : 61;		/* intra-region offset */
+		unsigned long reg :  3;		/* region number */
+	} f;
+	unsigned long l;
+	void *p;
+} ia64_va;
+
+/*
+ * Note: These macros depend on the fact that PAGE_OFFSET has all
+ * region bits set to 1 and all other bits set to zero.  They are
+ * expressed in this way to ensure they result in a single "dep"
+ * instruction.
+ */
+#define __pa(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
+#define __va(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
+
+#define REGION_NUMBER(x)	({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
+#define REGION_OFFSET(x)	({ia64_va _v; _v.l = (long) (x); _v.f.off;})
+
+#define REGION_SIZE		REGION_NUMBER(1)
+#define REGION_KERNEL		7
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define htlbpage_to_page(x)	(((unsigned long) REGION_NUMBER(x) << 61)			\
+				 | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
+# define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+# define is_hugepage_only_range(mm, addr, len)		\
+	 (REGION_NUMBER(addr) == REGION_HPAGE &&	\
+	  REGION_NUMBER((addr)+(len)) == REGION_HPAGE)
+extern unsigned int hpage_shift;
+#endif
+
+static __inline__ int
+get_order (unsigned long size)
+{
+	long double d = size - 1;
+	long order;
+
+	order = ia64_getf_exp(d);
+	order = order - PAGE_SHIFT - 0xffff + 1;
+	if (order < 0)
+		order = 0;
+	return order;
+}
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#ifdef STRICT_MM_TYPECHECKS
+  /*
+   * These are used to make use of C type-checking..
+   */
+  typedef struct { unsigned long pte; } pte_t;
+  typedef struct { unsigned long pmd; } pmd_t;
+  typedef struct { unsigned long pgd; } pgd_t;
+  typedef struct { unsigned long pgprot; } pgprot_t;
+
+# define pte_val(x)	((x).pte)
+# define pmd_val(x)	((x).pmd)
+# define pgd_val(x)	((x).pgd)
+# define pgprot_val(x)	((x).pgprot)
+
+# define __pte(x)	((pte_t) { (x) } )
+# define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+  /*
+   * .. while these make it easier on the compiler
+   */
+# ifndef __ASSEMBLY__
+    typedef unsigned long pte_t;
+    typedef unsigned long pmd_t;
+    typedef unsigned long pgd_t;
+    typedef unsigned long pgprot_t;
+# endif
+
+# define pte_val(x)	(x)
+# define pmd_val(x)	(x)
+# define pgd_val(x)	(x)
+# define pgprot_val(x)	(x)
+
+# define __pte(x)	(x)
+# define __pgd(x)	(x)
+# define __pgprot(x)	(x)
+#endif /* !STRICT_MM_TYPECHECKS */
+
+#define PAGE_OFFSET			__IA64_UL_CONST(0xe000000000000000)
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
+					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
+					  ? VM_EXEC : 0))
+
+#endif /* _ASM_IA64_PAGE_H */
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
new file mode 100644
index 000000000000..5dd477ffb88e
--- /dev/null
+++ b/include/asm-ia64/pal.h
@@ -0,0 +1,1564 @@
+#ifndef _ASM_IA64_PAL_H
+#define _ASM_IA64_PAL_H
+
+/*
+ * Processor Abstraction Layer definitions.
+ *
+ * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
+ * chapter 11 IA-64 Processor Abstraction Layer
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 99/10/01	davidm	Make sure we pass zero for reserved parameters.
+ * 00/03/07	davidm	Updated pal_cache_flush() to be in sync with PAL v2.6.
+ * 00/03/23     cfleck  Modified processor min-state save area to match updated PAL & SAL info
+ * 00/05/24     eranian Updated to latest PAL spec, fix structures bugs, added
+ * 00/05/25	eranian Support for stack calls, and static physical calls
+ * 00/06/18	eranian Support for stacked physical calls
+ */
+
+/*
+ * Note that some of these calls use a static-register only calling
+ * convention which has nothing to do with the regular calling
+ * convention.
+ */
+#define PAL_CACHE_FLUSH		1	/* flush i/d cache */
+#define PAL_CACHE_INFO		2	/* get detailed i/d cache info */
+#define PAL_CACHE_INIT		3	/* initialize i/d cache */
+#define PAL_CACHE_SUMMARY	4	/* get summary of cache heirarchy */
+#define PAL_MEM_ATTRIB		5	/* list supported memory attributes */
+#define PAL_PTCE_INFO		6	/* purge TLB info */
+#define PAL_VM_INFO		7	/* return supported virtual memory features */
+#define PAL_VM_SUMMARY		8	/* return summary on supported vm features */
+#define PAL_BUS_GET_FEATURES	9	/* return processor bus interface features settings */
+#define PAL_BUS_SET_FEATURES	10	/* set processor bus features */
+#define PAL_DEBUG_INFO		11	/* get number of debug registers */
+#define PAL_FIXED_ADDR		12	/* get fixed component of processors's directed address */
+#define PAL_FREQ_BASE		13	/* base frequency of the platform */
+#define PAL_FREQ_RATIOS		14	/* ratio of processor, bus and ITC frequency */
+#define PAL_PERF_MON_INFO	15	/* return performance monitor info */
+#define PAL_PLATFORM_ADDR	16	/* set processor interrupt block and IO port space addr */
+#define PAL_PROC_GET_FEATURES	17	/* get configurable processor features & settings */
+#define PAL_PROC_SET_FEATURES	18	/* enable/disable configurable processor features */
+#define PAL_RSE_INFO		19	/* return rse information */
+#define PAL_VERSION		20	/* return version of PAL code */
+#define PAL_MC_CLEAR_LOG	21	/* clear all processor log info */
+#define PAL_MC_DRAIN		22	/* drain operations which could result in an MCA */
+#define PAL_MC_EXPECTED		23	/* set/reset expected MCA indicator */
+#define PAL_MC_DYNAMIC_STATE	24	/* get processor dynamic state */
+#define PAL_MC_ERROR_INFO	25	/* get processor MCA info and static state */
+#define PAL_MC_RESUME		26	/* Return to interrupted process */
+#define PAL_MC_REGISTER_MEM	27	/* Register memory for PAL to use during MCAs and inits */
+#define PAL_HALT		28	/* enter the low power HALT state */
+#define PAL_HALT_LIGHT		29	/* enter the low power light halt state*/
+#define PAL_COPY_INFO		30	/* returns info needed to relocate PAL */
+#define PAL_CACHE_LINE_INIT	31	/* init tags & data of cache line */
+#define PAL_PMI_ENTRYPOINT	32	/* register PMI memory entry points with the processor */
+#define PAL_ENTER_IA_32_ENV	33	/* enter IA-32 system environment */
+#define PAL_VM_PAGE_SIZE	34	/* return vm TC and page walker page sizes */
+
+#define PAL_MEM_FOR_TEST	37	/* get amount of memory needed for late processor test */
+#define PAL_CACHE_PROT_INFO	38	/* get i/d cache protection info */
+#define PAL_REGISTER_INFO	39	/* return AR and CR register information*/
+#define PAL_SHUTDOWN		40	/* enter processor shutdown state */
+#define PAL_PREFETCH_VISIBILITY	41	/* Make Processor Prefetches Visible */
+
+#define PAL_COPY_PAL		256	/* relocate PAL procedures and PAL PMI */
+#define PAL_HALT_INFO		257	/* return the low power capabilities of processor */
+#define PAL_TEST_PROC		258	/* perform late processor self-test */
+#define PAL_CACHE_READ		259	/* read tag & data of cacheline for diagnostic testing */
+#define PAL_CACHE_WRITE		260	/* write tag & data of cacheline for diagnostic testing */
+#define PAL_VM_TR_READ		261	/* read contents of translation register */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/fpu.h>
+
+/*
+ * Data types needed to pass information into PAL procedures and
+ * interpret information returned by them.
+ */
+
+/* Return status from the PAL procedure */
+typedef s64				pal_status_t;
+
+#define PAL_STATUS_SUCCESS		0	/* No error */
+#define PAL_STATUS_UNIMPLEMENTED	(-1)	/* Unimplemented procedure */
+#define PAL_STATUS_EINVAL		(-2)	/* Invalid argument */
+#define PAL_STATUS_ERROR		(-3)	/* Error */
+#define PAL_STATUS_CACHE_INIT_FAIL	(-4)	/* Could not initialize the
+						 * specified level and type of
+						 * cache without sideeffects
+						 * and "restrict" was 1
+						 */
+
+/* Processor cache level in the heirarchy */
+typedef u64				pal_cache_level_t;
+#define PAL_CACHE_LEVEL_L0		0	/* L0 */
+#define PAL_CACHE_LEVEL_L1		1	/* L1 */
+#define PAL_CACHE_LEVEL_L2		2	/* L2 */
+
+
+/* Processor cache type at a particular level in the heirarchy */
+
+typedef u64				pal_cache_type_t;
+#define PAL_CACHE_TYPE_INSTRUCTION	1	/* Instruction cache */
+#define PAL_CACHE_TYPE_DATA		2	/* Data or unified cache */
+#define PAL_CACHE_TYPE_INSTRUCTION_DATA	3	/* Both Data & Instruction */
+
+
+#define PAL_CACHE_FLUSH_INVALIDATE	1	/* Invalidate clean lines */
+#define PAL_CACHE_FLUSH_CHK_INTRS	2	/* check for interrupts/mc while flushing */
+
+/* Processor cache line size in bytes  */
+typedef int				pal_cache_line_size_t;
+
+/* Processor cache line state */
+typedef u64				pal_cache_line_state_t;
+#define PAL_CACHE_LINE_STATE_INVALID	0	/* Invalid */
+#define PAL_CACHE_LINE_STATE_SHARED	1	/* Shared */
+#define PAL_CACHE_LINE_STATE_EXCLUSIVE	2	/* Exclusive */
+#define PAL_CACHE_LINE_STATE_MODIFIED	3	/* Modified */
+
+typedef struct pal_freq_ratio {
+	u64 den : 32, num : 32;	/* numerator & denominator */
+} itc_ratio, proc_ratio;
+
+typedef	union  pal_cache_config_info_1_s {
+	struct {
+		u64		u		: 1,	/* 0 Unified cache ? */
+				at		: 2,	/* 2-1 Cache mem attr*/
+				reserved	: 5,	/* 7-3 Reserved */
+				associativity	: 8,	/* 16-8 Associativity*/
+				line_size	: 8,	/* 23-17 Line size */
+				stride		: 8,	/* 31-24 Stride */
+				store_latency	: 8,	/*39-32 Store latency*/
+				load_latency	: 8,	/* 47-40 Load latency*/
+				store_hints	: 8,	/* 55-48 Store hints*/
+				load_hints	: 8;	/* 63-56 Load hints */
+	} pcci1_bits;
+	u64			pcci1_data;
+} pal_cache_config_info_1_t;
+
+typedef	union  pal_cache_config_info_2_s {
+	struct {
+		u64		cache_size	: 32,	/*cache size in bytes*/
+
+
+				alias_boundary	: 8,	/* 39-32 aliased addr
+							 * separation for max
+							 * performance.
+							 */
+				tag_ls_bit	: 8,	/* 47-40 LSb of addr*/
+				tag_ms_bit	: 8,	/* 55-48 MSb of addr*/
+				reserved	: 8;	/* 63-56 Reserved */
+	} pcci2_bits;
+	u64			pcci2_data;
+} pal_cache_config_info_2_t;
+
+
+typedef struct pal_cache_config_info_s {
+	pal_status_t			pcci_status;
+	pal_cache_config_info_1_t	pcci_info_1;
+	pal_cache_config_info_2_t	pcci_info_2;
+	u64				pcci_reserved;
+} pal_cache_config_info_t;
+
+#define pcci_ld_hints		pcci_info_1.pcci1_bits.load_hints
+#define pcci_st_hints		pcci_info_1.pcci1_bits.store_hints
+#define pcci_ld_latency		pcci_info_1.pcci1_bits.load_latency
+#define pcci_st_latency		pcci_info_1.pcci1_bits.store_latency
+#define pcci_stride		pcci_info_1.pcci1_bits.stride
+#define pcci_line_size		pcci_info_1.pcci1_bits.line_size
+#define pcci_assoc		pcci_info_1.pcci1_bits.associativity
+#define pcci_cache_attr		pcci_info_1.pcci1_bits.at
+#define pcci_unified		pcci_info_1.pcci1_bits.u
+#define pcci_tag_msb		pcci_info_2.pcci2_bits.tag_ms_bit
+#define pcci_tag_lsb		pcci_info_2.pcci2_bits.tag_ls_bit
+#define pcci_alias_boundary	pcci_info_2.pcci2_bits.alias_boundary
+#define pcci_cache_size		pcci_info_2.pcci2_bits.cache_size
+
+
+
+/* Possible values for cache attributes */
+
+#define PAL_CACHE_ATTR_WT		0	/* Write through cache */
+#define PAL_CACHE_ATTR_WB		1	/* Write back cache */
+#define PAL_CACHE_ATTR_WT_OR_WB		2	/* Either write thru or write
+						 * back depending on TLB
+						 * memory attributes
+						 */
+
+
+/* Possible values for cache hints */
+
+#define PAL_CACHE_HINT_TEMP_1		0	/* Temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_1		1	/* Non-temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_ALL	3	/* Non-temporal all levels */
+
+/* Processor cache protection  information */
+typedef union pal_cache_protection_element_u {
+	u32			pcpi_data;
+	struct {
+		u32		data_bits	: 8, /* # data bits covered by
+						      * each unit of protection
+						      */
+
+				tagprot_lsb	: 6, /* Least -do- */
+				tagprot_msb	: 6, /* Most Sig. tag address
+						      * bit that this
+						      * protection covers.
+						      */
+				prot_bits	: 6, /* # of protection bits */
+				method		: 4, /* Protection method */
+				t_d		: 2; /* Indicates which part
+						      * of the cache this
+						      * protection encoding
+						      * applies.
+						      */
+	} pcp_info;
+} pal_cache_protection_element_t;
+
+#define pcpi_cache_prot_part	pcp_info.t_d
+#define pcpi_prot_method	pcp_info.method
+#define pcpi_prot_bits		pcp_info.prot_bits
+#define pcpi_tagprot_msb	pcp_info.tagprot_msb
+#define pcpi_tagprot_lsb	pcp_info.tagprot_lsb
+#define pcpi_data_bits		pcp_info.data_bits
+
+/* Processor cache part encodings */
+#define PAL_CACHE_PROT_PART_DATA	0	/* Data protection  */
+#define PAL_CACHE_PROT_PART_TAG		1	/* Tag  protection */
+#define PAL_CACHE_PROT_PART_TAG_DATA	2	/* Tag+data protection (tag is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_DATA_TAG	3	/* Data+tag protection (data is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_MAX		6
+
+
+typedef struct pal_cache_protection_info_s {
+	pal_status_t			pcpi_status;
+	pal_cache_protection_element_t	pcp_info[PAL_CACHE_PROT_PART_MAX];
+} pal_cache_protection_info_t;
+
+
+/* Processor cache protection method encodings */
+#define PAL_CACHE_PROT_METHOD_NONE		0	/* No protection */
+#define PAL_CACHE_PROT_METHOD_ODD_PARITY	1	/* Odd parity */
+#define PAL_CACHE_PROT_METHOD_EVEN_PARITY	2	/* Even parity */
+#define PAL_CACHE_PROT_METHOD_ECC		3	/* ECC protection */
+
+
+/* Processor cache line identification in the heirarchy */
+typedef union pal_cache_line_id_u {
+	u64			pclid_data;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * heirarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				reserved	: 32;	/* 63-32 is reserved*/
+	} pclid_info_read;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * heirarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				mesi		: 8,	/* 39-32 cache line
+							 * state
+							 */
+				start		: 8,	/* 47-40 lsb of data to
+							 * invert
+							 */
+				length		: 8,	/* 55-48 #bits to
+							 * invert
+							 */
+				trigger		: 8;	/* 63-56 Trigger error
+							 * by doing a load
+							 * after the write
+							 */
+
+	} pclid_info_write;
+} pal_cache_line_id_u_t;
+
+#define pclid_read_part		pclid_info_read.part
+#define pclid_read_way		pclid_info_read.way
+#define pclid_read_level	pclid_info_read.level
+#define pclid_read_cache_type	pclid_info_read.cache_type
+
+#define pclid_write_trigger	pclid_info_write.trigger
+#define pclid_write_length	pclid_info_write.length
+#define pclid_write_start	pclid_info_write.start
+#define pclid_write_mesi	pclid_info_write.mesi
+#define pclid_write_part	pclid_info_write.part
+#define pclid_write_way		pclid_info_write.way
+#define pclid_write_level	pclid_info_write.level
+#define pclid_write_cache_type	pclid_info_write.cache_type
+
+/* Processor cache line part encodings */
+#define PAL_CACHE_LINE_ID_PART_DATA		0	/* Data */
+#define PAL_CACHE_LINE_ID_PART_TAG		1	/* Tag */
+#define PAL_CACHE_LINE_ID_PART_DATA_PROT	2	/* Data protection */
+#define PAL_CACHE_LINE_ID_PART_TAG_PROT		3	/* Tag protection */
+#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT	4	/* Data+tag
+							 * protection
+							 */
+typedef struct pal_cache_line_info_s {
+	pal_status_t		pcli_status;		/* Return status of the read cache line
+							 * info call.
+							 */
+	u64			pcli_data;		/* 64-bit data, tag, protection bits .. */
+	u64			pcli_data_len;		/* data length in bits */
+	pal_cache_line_state_t	pcli_cache_line_state;	/* mesi state */
+
+} pal_cache_line_info_t;
+
+
+/* Machine Check related crap */
+
+/* Pending event status bits  */
+typedef u64					pal_mc_pending_events_t;
+
+#define PAL_MC_PENDING_MCA			(1 << 0)
+#define PAL_MC_PENDING_INIT			(1 << 1)
+
+/* Error information type */
+typedef u64					pal_mc_info_index_t;
+
+#define PAL_MC_INFO_PROCESSOR			0	/* Processor */
+#define PAL_MC_INFO_CACHE_CHECK			1	/* Cache check */
+#define PAL_MC_INFO_TLB_CHECK			2	/* Tlb check */
+#define PAL_MC_INFO_BUS_CHECK			3	/* Bus check */
+#define PAL_MC_INFO_REQ_ADDR			4	/* Requestor address */
+#define PAL_MC_INFO_RESP_ADDR			5	/* Responder address */
+#define PAL_MC_INFO_TARGET_ADDR			6	/* Target address */
+#define PAL_MC_INFO_IMPL_DEP			7	/* Implementation
+							 * dependent
+							 */
+
+
+typedef struct pal_process_state_info_s {
+	u64		reserved1	: 2,
+			rz		: 1,	/* PAL_CHECK processor
+						 * rendezvous
+						 * successful.
+						 */
+
+			ra		: 1,	/* PAL_CHECK attempted
+						 * a rendezvous.
+						 */
+			me		: 1,	/* Distinct multiple
+						 * errors occurred
+						 */
+
+			mn		: 1,	/* Min. state save
+						 * area has been
+						 * registered with PAL
+						 */
+
+			sy		: 1,	/* Storage integrity
+						 * synched
+						 */
+
+
+			co		: 1,	/* Continuable */
+			ci		: 1,	/* MC isolated */
+			us		: 1,	/* Uncontained storage
+						 * damage.
+						 */
+
+
+			hd		: 1,	/* Non-essential hw
+						 * lost (no loss of
+						 * functionality)
+						 * causing the
+						 * processor to run in
+						 * degraded mode.
+						 */
+
+			tl		: 1,	/* 1 => MC occurred
+						 * after an instr was
+						 * executed but before
+						 * the trap that
+						 * resulted from instr
+						 * execution was
+						 * generated.
+						 * (Trap Lost )
+						 */
+			mi		: 1,	/* More information available
+						 * call PAL_MC_ERROR_INFO
+						 */
+			pi		: 1,	/* Precise instruction pointer */
+			pm		: 1,	/* Precise min-state save area */
+
+			dy		: 1,	/* Processor dynamic
+						 * state valid
+						 */
+
+
+			in		: 1,	/* 0 = MC, 1 = INIT */
+			rs		: 1,	/* RSE valid */
+			cm		: 1,	/* MC corrected */
+			ex		: 1,	/* MC is expected */
+			cr		: 1,	/* Control regs valid*/
+			pc		: 1,	/* Perf cntrs valid */
+			dr		: 1,	/* Debug regs valid */
+			tr		: 1,	/* Translation regs
+						 * valid
+						 */
+			rr		: 1,	/* Region regs valid */
+			ar		: 1,	/* App regs valid */
+			br		: 1,	/* Branch regs valid */
+			pr		: 1,	/* Predicate registers
+						 * valid
+						 */
+
+			fp		: 1,	/* fp registers valid*/
+			b1		: 1,	/* Preserved bank one
+						 * general registers
+						 * are valid
+						 */
+			b0		: 1,	/* Preserved bank zero
+						 * general registers
+						 * are valid
+						 */
+			gr		: 1,	/* General registers
+						 * are valid
+						 * (excl. banked regs)
+						 */
+			dsize		: 16,	/* size of dynamic
+						 * state returned
+						 * by the processor
+						 */
+
+			reserved2	: 11,
+			cc		: 1,	/* Cache check */
+			tc		: 1,	/* TLB check */
+			bc		: 1,	/* Bus check */
+			rc		: 1,	/* Register file check */
+			uc		: 1;	/* Uarch check */
+
+} pal_processor_state_info_t;
+
+typedef struct pal_cache_check_info_s {
+	u64		op		: 4,	/* Type of cache
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			level		: 2,	/* Cache level */
+			reserved1	: 2,
+			dl		: 1,	/* Failure in data part
+						 * of cache line
+						 */
+			tl		: 1,	/* Failure in tag part
+						 * of cache line
+						 */
+			dc		: 1,	/* Failure in dcache */
+			ic		: 1,	/* Failure in icache */
+			mesi		: 3,	/* Cache line state */
+			mv		: 1,	/* mesi valid */
+			way		: 5,	/* Way in which the
+						 * error occurred
+						 */
+			wiv		: 1,	/* Way field valid */
+			reserved2	: 10,
+
+			index		: 20,	/* Cache line index */
+			reserved3	: 2,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_cache_check_info_t;
+
+typedef struct pal_tlb_check_info_s {
+
+	u64		tr_slot		: 8,	/* Slot# of TR where
+						 * error occurred
+						 */
+			trv		: 1,	/* tr_slot field is valid */
+			reserved1	: 1,
+			level		: 2,	/* TLB level where failure occurred */
+			reserved2	: 4,
+			dtr		: 1,	/* Fail in data TR */
+			itr		: 1,	/* Fail in inst TR */
+			dtc		: 1,	/* Fail in data TC */
+			itc		: 1,	/* Fail in inst. TC */
+			op		: 4,	/* Cache operation */
+			reserved3	: 30,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_tlb_check_info_t;
+
+typedef struct pal_bus_check_info_s {
+	u64		size		: 5,	/* Xaction size */
+			ib		: 1,	/* Internal bus error */
+			eb		: 1,	/* External bus error */
+			cc		: 1,	/* Error occurred
+						 * during cache-cache
+						 * transfer.
+						 */
+			type		: 8,	/* Bus xaction type*/
+			sev		: 5,	/* Bus error severity*/
+			hier		: 2,	/* Bus hierarchy level */
+			reserved1	: 1,
+			bsi		: 8,	/* Bus error status
+						 * info
+						 */
+			reserved2	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_bus_check_info_t;
+
+typedef struct pal_reg_file_check_info_s {
+	u64		id		: 4,	/* Register file identifier */
+			op		: 4,	/* Type of register
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			reg_num		: 7,	/* Register number */
+			rnv		: 1,	/* reg_num valid */
+			reserved2	: 38,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			reserved3	: 3,
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_reg_file_check_info_t;
+
+typedef struct pal_uarch_check_info_s {
+	u64		sid		: 5,	/* Structure identification */
+			level		: 3,	/* Level of failure */
+			array_id	: 4,	/* Array identification */
+			op		: 4,	/* Type of
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			way		: 6,	/* Way of structure */
+			wv		: 1,	/* way valid */
+			xv		: 1,	/* index valid */
+			reserved1	: 8,
+			index		: 8,	/* Index or set of the uarch
+						 * structure that failed.
+						 */
+			reserved2	: 24,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_uarch_check_info_t;
+
+typedef union pal_mc_error_info_u {
+	u64				pmei_data;
+	pal_processor_state_info_t	pme_processor;
+	pal_cache_check_info_t		pme_cache;
+	pal_tlb_check_info_t		pme_tlb;
+	pal_bus_check_info_t		pme_bus;
+	pal_reg_file_check_info_t	pme_reg_file;
+	pal_uarch_check_info_t		pme_uarch;
+} pal_mc_error_info_t;
+
+#define pmci_proc_unknown_check			pme_processor.uc
+#define pmci_proc_bus_check			pme_processor.bc
+#define pmci_proc_tlb_check			pme_processor.tc
+#define pmci_proc_cache_check			pme_processor.cc
+#define pmci_proc_dynamic_state_size		pme_processor.dsize
+#define pmci_proc_gpr_valid			pme_processor.gr
+#define pmci_proc_preserved_bank0_gpr_valid	pme_processor.b0
+#define pmci_proc_preserved_bank1_gpr_valid	pme_processor.b1
+#define pmci_proc_fp_valid			pme_processor.fp
+#define pmci_proc_predicate_regs_valid		pme_processor.pr
+#define pmci_proc_branch_regs_valid		pme_processor.br
+#define pmci_proc_app_regs_valid		pme_processor.ar
+#define pmci_proc_region_regs_valid		pme_processor.rr
+#define pmci_proc_translation_regs_valid	pme_processor.tr
+#define pmci_proc_debug_regs_valid		pme_processor.dr
+#define pmci_proc_perf_counters_valid		pme_processor.pc
+#define pmci_proc_control_regs_valid		pme_processor.cr
+#define pmci_proc_machine_check_expected	pme_processor.ex
+#define pmci_proc_machine_check_corrected	pme_processor.cm
+#define pmci_proc_rse_valid			pme_processor.rs
+#define pmci_proc_machine_check_or_init		pme_processor.in
+#define pmci_proc_dynamic_state_valid		pme_processor.dy
+#define pmci_proc_operation			pme_processor.op
+#define pmci_proc_trap_lost			pme_processor.tl
+#define pmci_proc_hardware_damage		pme_processor.hd
+#define pmci_proc_uncontained_storage_damage	pme_processor.us
+#define pmci_proc_machine_check_isolated	pme_processor.ci
+#define pmci_proc_continuable			pme_processor.co
+#define pmci_proc_storage_intergrity_synced	pme_processor.sy
+#define pmci_proc_min_state_save_area_regd	pme_processor.mn
+#define	pmci_proc_distinct_multiple_errors	pme_processor.me
+#define pmci_proc_pal_attempted_rendezvous	pme_processor.ra
+#define pmci_proc_pal_rendezvous_complete	pme_processor.rz
+
+
+#define pmci_cache_level			pme_cache.level
+#define pmci_cache_line_state			pme_cache.mesi
+#define pmci_cache_line_state_valid		pme_cache.mv
+#define pmci_cache_line_index			pme_cache.index
+#define pmci_cache_instr_cache_fail		pme_cache.ic
+#define pmci_cache_data_cache_fail		pme_cache.dc
+#define pmci_cache_line_tag_fail		pme_cache.tl
+#define pmci_cache_line_data_fail		pme_cache.dl
+#define pmci_cache_operation			pme_cache.op
+#define pmci_cache_way_valid			pme_cache.wv
+#define pmci_cache_target_address_valid		pme_cache.tv
+#define pmci_cache_way				pme_cache.way
+#define pmci_cache_mc				pme_cache.mc
+
+#define pmci_tlb_instr_translation_cache_fail	pme_tlb.itc
+#define pmci_tlb_data_translation_cache_fail	pme_tlb.dtc
+#define pmci_tlb_instr_translation_reg_fail	pme_tlb.itr
+#define pmci_tlb_data_translation_reg_fail	pme_tlb.dtr
+#define pmci_tlb_translation_reg_slot		pme_tlb.tr_slot
+#define pmci_tlb_mc				pme_tlb.mc
+
+#define pmci_bus_status_info			pme_bus.bsi
+#define pmci_bus_req_address_valid		pme_bus.rq
+#define pmci_bus_resp_address_valid		pme_bus.rp
+#define pmci_bus_target_address_valid		pme_bus.tv
+#define pmci_bus_error_severity			pme_bus.sev
+#define pmci_bus_transaction_type		pme_bus.type
+#define pmci_bus_cache_cache_transfer		pme_bus.cc
+#define pmci_bus_transaction_size		pme_bus.size
+#define pmci_bus_internal_error			pme_bus.ib
+#define pmci_bus_external_error			pme_bus.eb
+#define pmci_bus_mc				pme_bus.mc
+
+/*
+ * NOTE: this min_state_save area struct only includes the 1KB
+ * architectural state save area.  The other 3 KB is scratch space
+ * for PAL.
+ */
+
+typedef struct pal_min_state_area_s {
+	u64	pmsa_nat_bits;		/* nat bits for saved GRs  */
+	u64	pmsa_gr[15];		/* GR1	- GR15		   */
+	u64	pmsa_bank0_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_bank1_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_pr;		/* predicate registers	   */
+	u64	pmsa_br0;		/* branch register 0	   */
+	u64	pmsa_rsc;		/* ar.rsc		   */
+	u64	pmsa_iip;		/* cr.iip		   */
+	u64	pmsa_ipsr;		/* cr.ipsr		   */
+	u64	pmsa_ifs;		/* cr.ifs		   */
+	u64	pmsa_xip;		/* previous iip		   */
+	u64	pmsa_xpsr;		/* previous psr		   */
+	u64	pmsa_xfs;		/* previous ifs		   */
+	u64	pmsa_br1;		/* branch register 1	   */
+	u64	pmsa_reserved[70];	/* pal_min_state_area should total to 1KB */
+} pal_min_state_area_t;
+
+
+struct ia64_pal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+/*
+ * Note: Currently unused PAL arguments are generally labeled
+ * "reserved" so the value specified in the PAL documentation
+ * (generally 0) MUST be passed.  Reserved parameters are not optional
+ * parameters.
+ */
+extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
+extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
+extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
+
+#define PAL_CALL(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3, 0);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_IC_OFF(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3, 1);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+typedef int (*ia64_pal_handler) (u64, ...);
+extern ia64_pal_handler ia64_pal;
+extern void ia64_pal_handler_init (void *);
+
+extern ia64_pal_handler ia64_pal;
+
+extern pal_cache_config_info_t		l0d_cache_config_info;
+extern pal_cache_config_info_t		l0i_cache_config_info;
+extern pal_cache_config_info_t		l1_cache_config_info;
+extern pal_cache_config_info_t		l2_cache_config_info;
+
+extern pal_cache_protection_info_t	l0d_cache_protection_info;
+extern pal_cache_protection_info_t	l0i_cache_protection_info;
+extern pal_cache_protection_info_t	l1_cache_protection_info;
+extern pal_cache_protection_info_t	l2_cache_protection_info;
+
+extern pal_cache_config_info_t		pal_cache_config_info_get(pal_cache_level_t,
+								  pal_cache_type_t);
+
+extern pal_cache_protection_info_t	pal_cache_protection_info_get(pal_cache_level_t,
+								      pal_cache_type_t);
+
+
+extern void				pal_error(int);
+
+
+/* Useful wrappers for the current list of pal procedures */
+
+typedef union pal_bus_features_u {
+	u64	pal_bus_features_val;
+	struct {
+		u64	pbf_reserved1				:	29;
+		u64	pbf_req_bus_parking			:	1;
+		u64	pbf_bus_lock_mask			:	1;
+		u64	pbf_enable_half_xfer_rate		:	1;
+		u64	pbf_reserved2				:	22;
+		u64	pbf_disable_xaction_queueing		:	1;
+		u64	pbf_disable_resp_err_check		:	1;
+		u64	pbf_disable_berr_check			:	1;
+		u64	pbf_disable_bus_req_internal_err_signal	:	1;
+		u64	pbf_disable_bus_req_berr_signal		:	1;
+		u64	pbf_disable_bus_init_event_check	:	1;
+		u64	pbf_disable_bus_init_event_signal	:	1;
+		u64	pbf_disable_bus_addr_err_check		:	1;
+		u64	pbf_disable_bus_addr_err_signal		:	1;
+		u64	pbf_disable_bus_data_err_check		:	1;
+	} pal_bus_features_s;
+} pal_bus_features_u_t;
+
+extern void pal_bus_features_print (u64);
+
+/* Provide information about configurable processor bus features */
+static inline s64
+ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
+			   pal_bus_features_u_t *features_status,
+			   pal_bus_features_u_t *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
+	if (features_avail)
+		features_avail->pal_bus_features_val = iprv.v0;
+	if (features_status)
+		features_status->pal_bus_features_val = iprv.v1;
+	if (features_control)
+		features_control->pal_bus_features_val = iprv.v2;
+	return iprv.status;
+}
+
+/* Enables/disables specific processor bus features */
+static inline s64
+ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
+	return iprv.status;
+}
+
+/* Get detailed cache information */
+static inline s64
+ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		conf->pcci_status                 = iprv.status;
+		conf->pcci_info_1.pcci1_data      = iprv.v0;
+		conf->pcci_info_2.pcci2_data      = iprv.v1;
+		conf->pcci_reserved               = iprv.v2;
+	}
+	return iprv.status;
+
+}
+
+/* Get detailed cche protection information */
+static inline s64
+ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		prot->pcpi_status           = iprv.status;
+		prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
+		prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
+		prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
+		prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
+		prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
+		prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
+	}
+	return iprv.status;
+}
+
+/*
+ * Flush the processor instruction or data caches.  *PROGRESS must be
+ * initialized to zero before calling this for the first time..
+ */
+static inline s64
+ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+	if (vector)
+		*vector = iprv.v0;
+	*progress = iprv.v1;
+	return iprv.status;
+}
+
+
+/* Initialize the processor controlled caches */
+static inline s64
+ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
+	return iprv.status;
+}
+
+/* Initialize the tags and data of a data or unified cache line of
+ * processor controlled cache to known values without the availability
+ * of backing memory.
+ */
+static inline s64
+ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
+	return iprv.status;
+}
+
+
+/* Read the data and tag of a processor controlled cache line for diags */
+static inline s64
+ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_READ, line_id.pclid_data, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Return summary information about the heirarchy of caches controlled by the processor */
+static inline s64
+ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
+	if (cache_levels)
+		*cache_levels = iprv.v0;
+	if (unique_caches)
+		*unique_caches = iprv.v1;
+	return iprv.status;
+}
+
+/* Write the data and tag of a processor-controlled cache line for diags */
+static inline s64
+ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_WRITE, line_id.pclid_data, physical_addr, data);
+	return iprv.status;
+}
+
+
+/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
+		    u64 *buffer_size, u64 *buffer_align)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
+	if (buffer_size)
+		*buffer_size = iprv.v0;
+	if (buffer_align)
+		*buffer_align = iprv.v1;
+	return iprv.status;
+}
+
+/* Copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
+	if (pal_proc_offset)
+		*pal_proc_offset = iprv.v0;
+	return iprv.status;
+}
+
+/* Return the number of instruction and data debug register pairs */
+static inline s64
+ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
+	if (inst_regs)
+		*inst_regs = iprv.v0;
+	if (data_regs)
+		*data_regs = iprv.v1;
+
+	return iprv.status;
+}
+
+#ifdef TBD
+/* Switch from IA64-system environment to IA-32 system environment */
+static inline s64
+ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
+	return iprv.status;
+}
+#endif
+
+/* Get unique geographical address of this processor on its bus */
+static inline s64
+ia64_pal_fixed_addr (u64 *global_unique_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
+	if (global_unique_addr)
+		*global_unique_addr = iprv.v0;
+	return iprv.status;
+}
+
+/* Get base frequency of the platform if generated by the processor */
+static inline s64
+ia64_pal_freq_base (u64 *platform_base_freq)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
+	if (platform_base_freq)
+		*platform_base_freq = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * Get the ratios for processor frequency, bus frequency and interval timer to
+ * to base frequency of the platform
+ */
+static inline s64
+ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
+		      struct pal_freq_ratio *itc_ratio)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
+	if (proc_ratio)
+		*(u64 *)proc_ratio = iprv.v0;
+	if (bus_ratio)
+		*(u64 *)bus_ratio = iprv.v1;
+	if (itc_ratio)
+		*(u64 *)itc_ratio = iprv.v2;
+	return iprv.status;
+}
+
+/* Make the processor enter HALT or one of the implementation dependent low
+ * power states where prefetching and execution are suspended and cache and
+ * TLB coherency is not maintained.
+ */
+static inline s64
+ia64_pal_halt (u64 halt_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
+	return iprv.status;
+}
+
+typedef union pal_power_mgmt_info_u {
+	u64			ppmi_data;
+	struct {
+	       u64		exit_latency		: 16,
+				entry_latency		: 16,
+				power_consumption	: 28,
+				im			: 1,
+				co			: 1,
+				reserved		: 2;
+	} pal_power_mgmt_info_s;
+} pal_power_mgmt_info_u_t;
+
+/* Return information about processor's optional power management capabilities. */
+static inline s64
+ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
+ * suspended, but cache and TLB coherency is maintained.
+ */
+static inline s64
+ia64_pal_halt_light (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Clear all the processor error logging   registers and reset the indicator that allows
+ * the error logging registers to be written. This procedure also checks the pending
+ * machine check bit and pending INIT bit and reports their states.
+ */
+static inline s64
+ia64_pal_mc_clear_log (u64 *pending_vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
+	if (pending_vector)
+		*pending_vector = iprv.v0;
+	return iprv.status;
+}
+
+/* Ensure that all outstanding transactions in a processor are completed or that any
+ * MCA due to thes outstanding transaction is taken.
+ */
+static inline s64
+ia64_pal_mc_drain (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Return the machine check dynamic processor state */
+static inline s64
+ia64_pal_mc_dynamic_state (u64 offset, u64 *size, u64 *pds)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, offset, 0, 0);
+	if (size)
+		*size = iprv.v0;
+	if (pds)
+		*pds = iprv.v1;
+	return iprv.status;
+}
+
+/* Return processor machine check information */
+static inline s64
+ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
+	if (size)
+		*size = iprv.v0;
+	if (error_info)
+		*error_info = iprv.v1;
+	return iprv.status;
+}
+
+/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
+ * attempt to correct any expected machine checks.
+ */
+static inline s64
+ia64_pal_mc_expected (u64 expected, u64 *previous)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
+	if (previous)
+		*previous = iprv.v0;
+	return iprv.status;
+}
+
+/* Register a platform dependent location with PAL to which it can save
+ * minimal processor state in the event of a machine check or initialization
+ * event.
+ */
+static inline s64
+ia64_pal_mc_register_mem (u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, 0, 0);
+	return iprv.status;
+}
+
+/* Restore minimal architectural processor state, set CMC interrupt if necessary
+ * and resume execution
+ */
+static inline s64
+ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
+	return iprv.status;
+}
+
+/* Return the memory attributes implemented by the processor */
+static inline s64
+ia64_pal_mem_attrib (u64 *mem_attrib)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
+	if (mem_attrib)
+		*mem_attrib = iprv.v0 & 0xff;
+	return iprv.status;
+}
+
+/* Return the amount of memory needed for second phase of processor
+ * self-test and the required alignment of memory.
+ */
+static inline s64
+ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
+	if (bytes_needed)
+		*bytes_needed = iprv.v0;
+	if (alignment)
+		*alignment = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_perf_mon_info_u {
+	u64			  ppmi_data;
+	struct {
+	       u64		generic		: 8,
+				width		: 8,
+				cycles		: 8,
+				retired		: 8,
+				reserved	: 32;
+	} pal_perf_mon_info_s;
+} pal_perf_mon_info_u_t;
+
+/* Return the performance monitor information about what can be counted
+ * and how to configure the monitors to count the desired events.
+ */
+static inline s64
+ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
+	if (pm_info)
+		pm_info->ppmi_data = iprv.v0;
+	return iprv.status;
+}
+
+/* Specifies the physical address of the processor interrupt block
+ * and I/O port space.
+ */
+static inline s64
+ia64_pal_platform_addr (u64 type, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Set the SAL PMI entrypoint in memory */
+static inline s64
+ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
+	return iprv.status;
+}
+
+struct pal_features_s;
+/* Provide information about configurable processor features */
+static inline s64
+ia64_pal_proc_get_features (u64 *features_avail,
+			    u64 *features_status,
+			    u64 *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, 0, 0);
+	if (iprv.status == 0) {
+		*features_avail   = iprv.v0;
+		*features_status  = iprv.v1;
+		*features_control = iprv.v2;
+	}
+	return iprv.status;
+}
+
+/* Enable/disable processor dependent features */
+static inline s64
+ia64_pal_proc_set_features (u64 feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
+	return iprv.status;
+}
+
+/*
+ * Put everything in a struct so we avoid the global offset table whenever
+ * possible.
+ */
+typedef struct ia64_ptce_info_s {
+	u64		base;
+	u32		count[2];
+	u32		stride[2];
+} ia64_ptce_info_t;
+
+/* Return the information required for the architected loop used to purge
+ * (initialize) the entire TC
+ */
+static inline s64
+ia64_get_ptce (ia64_ptce_info_t *ptce)
+{
+	struct ia64_pal_retval iprv;
+
+	if (!ptce)
+		return -1;
+
+	PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
+	if (iprv.status == 0) {
+		ptce->base = iprv.v0;
+		ptce->count[0] = iprv.v1 >> 32;
+		ptce->count[1] = iprv.v1 & 0xffffffff;
+		ptce->stride[0] = iprv.v2 >> 32;
+		ptce->stride[1] = iprv.v2 & 0xffffffff;
+	}
+	return iprv.status;
+}
+
+/* Return info about implemented application and control registers. */
+static inline s64
+ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
+	if (reg_info_1)
+		*reg_info_1 = iprv.v0;
+	if (reg_info_2)
+		*reg_info_2 = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_hints_u {
+	u64			ph_data;
+	struct {
+	       u64		si		: 1,
+				li		: 1,
+				reserved	: 62;
+	} pal_hints_s;
+} pal_hints_u_t;
+
+/* Return information about the register stack and RSE for this processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
+	if (num_phys_stacked)
+		*num_phys_stacked = iprv.v0;
+	if (hints)
+		hints->ph_data = iprv.v1;
+	return iprv.status;
+}
+
+/* Cause the processor to enter	SHUTDOWN state, where prefetching and execution are
+ * suspended, but cause cache and TLB coherency to be maintained.
+ * This is usually called in IA-32 mode.
+ */
+static inline s64
+ia64_pal_shutdown (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Perform the second phase of processor self-test. */
+static inline s64
+ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
+	if (self_test_state)
+		*self_test_state = iprv.v0;
+	return iprv.status;
+}
+
+typedef union  pal_version_u {
+	u64	pal_version_val;
+	struct {
+		u64	pv_pal_b_rev		:	8;
+		u64	pv_pal_b_model		:	8;
+		u64	pv_reserved1		:	8;
+		u64	pv_pal_vendor		:	8;
+		u64	pv_pal_a_rev		:	8;
+		u64	pv_pal_a_model		:	8;
+		u64	pv_reserved2		:	16;
+	} pal_version_s;
+} pal_version_u_t;
+
+
+/* Return PAL version information */
+static inline s64
+ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
+	if (pal_min_version)
+		pal_min_version->pal_version_val = iprv.v0;
+
+	if (pal_cur_version)
+		pal_cur_version->pal_version_val = iprv.v1;
+
+	return iprv.status;
+}
+
+typedef union pal_tc_info_u {
+	u64			pti_val;
+	struct {
+	       u64		num_sets	:	8,
+				associativity	:	8,
+				num_entries	:	16,
+				pf		:	1,
+				unified		:	1,
+				reduce_tr	:	1,
+				reserved	:	29;
+	} pal_tc_info_s;
+} pal_tc_info_u_t;
+
+#define tc_reduce_tr		pal_tc_info_s.reduce_tr
+#define tc_unified		pal_tc_info_s.unified
+#define tc_pf			pal_tc_info_s.pf
+#define tc_num_entries		pal_tc_info_s.num_entries
+#define tc_associativity	pal_tc_info_s.associativity
+#define tc_num_sets		pal_tc_info_s.num_sets
+
+
+/* Return information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
+	if (tc_info)
+		tc_info->pti_val = iprv.v0;
+	if (tc_pages)
+		*tc_pages = iprv.v1;
+	return iprv.status;
+}
+
+/* Get page size information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
+	if (tr_pages)
+		*tr_pages = iprv.v0;
+	if (vw_pages)
+		*vw_pages = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vm_info_1_u {
+	u64			pvi1_val;
+	struct {
+		u64		vw		: 1,
+				phys_add_size	: 7,
+				key_size	: 8,
+				max_pkr		: 8,
+				hash_tag_id	: 8,
+				max_dtr_entry	: 8,
+				max_itr_entry	: 8,
+				max_unique_tcs	: 8,
+				num_tc_levels	: 8;
+	} pal_vm_info_1_s;
+} pal_vm_info_1_u_t;
+
+typedef union pal_vm_info_2_u {
+	u64			pvi2_val;
+	struct {
+		u64		impl_va_msb	: 8,
+				rid_size	: 8,
+				reserved	: 48;
+	} pal_vm_info_2_s;
+} pal_vm_info_2_u_t;
+
+/* Get summary information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
+	if (vm_info_1)
+		vm_info_1->pvi1_val = iprv.v0;
+	if (vm_info_2)
+		vm_info_2->pvi2_val = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_itr_valid_u {
+	u64			piv_val;
+	struct {
+	       u64		access_rights_valid	: 1,
+				priv_level_valid	: 1,
+				dirty_bit_valid		: 1,
+				mem_attr_valid		: 1,
+				reserved		: 60;
+	} pal_tr_valid_s;
+} pal_tr_valid_u_t;
+
+/* Read a translation register */
+static inline s64
+ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
+	if (tr_valid)
+		tr_valid->piv_val = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * PAL_PREFETCH_VISIBILITY transaction types
+ */
+#define PAL_VISIBILITY_VIRTUAL		0
+#define PAL_VISIBILITY_PHYSICAL		1
+
+/*
+ * PAL_PREFETCH_VISIBILITY return codes
+ */
+#define PAL_VISIBILITY_OK		1
+#define PAL_VISIBILITY_OK_REMOTE_NEEDED	0
+#define PAL_VISIBILITY_INVAL_ARG	-2
+#define PAL_VISIBILITY_ERROR		-3
+
+static inline s64
+ia64_pal_prefetch_visibility (s64 trans_type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
+	return iprv.status;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PAL_H */
diff --git a/include/asm-ia64/param.h b/include/asm-ia64/param.h
new file mode 100644
index 000000000000..6c6b679b7a9e
--- /dev/null
+++ b/include/asm-ia64/param.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
+
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# include <linux/config.h>	/* mustn't include <linux/config.h> outside of #ifdef __KERNEL__ */
+# ifdef CONFIG_IA64_HP_SIM
+  /*
+   * Yeah, simulating stuff is slow, so let us catch some breath between
+   * timer interrupts...
+   */
+#  define HZ	  32
+# else
+#  define HZ	1024
+# endif
+# define USER_HZ	HZ
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#else
+   /*
+    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
+    * get the HZ value is via sysconf(_SC_CLK_TCK).
+    */
+# define HZ 1024
+#endif
+
+#endif /* _ASM_IA64_PARAM_H */
diff --git a/include/asm-ia64/parport.h b/include/asm-ia64/parport.h
new file mode 100644
index 000000000000..67e16adfcd25
--- /dev/null
+++ b/include/asm-ia64/parport.h
@@ -0,0 +1,20 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_IA64_PARPORT_H
+#define _ASM_IA64_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+
+static int __devinit
+parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_IA64_PARPORT_H */
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
new file mode 100644
index 000000000000..4797f3535e6d
--- /dev/null
+++ b/include/asm-ia64/patch.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_PATCH_H
+#define _ASM_IA64_PATCH_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * There are a number of reasons for patching instructions.  Rather than duplicating code
+ * all over the place, we put the common stuff here.  Reasons for patching: in-kernel
+ * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
+ * shared library.  Undoubtedly, some of these reasons will disappear and others will
+ * be added over time.
+ */
+#include <linux/elf.h>
+#include <linux/types.h>
+
+extern void ia64_patch (u64 insn_addr, u64 mask, u64 val);	/* patch any insn slot */
+extern void ia64_patch_imm64 (u64 insn_addr, u64 val);		/* patch "movl" w/abs. value*/
+extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel value */
+
+extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
+extern void ia64_patch_vtop (unsigned long start, unsigned long end);
+extern void ia64_patch_gate (void);
+
+#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
new file mode 100644
index 000000000000..a8314ee4e7d2
--- /dev/null
+++ b/include/asm-ia64/pci.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_PCI_H
+#define _ASM_IA64_PCI_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
+ * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
+ * loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+void pcibios_config_init(void);
+
+struct pci_dev;
+
+/*
+ * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct correspondence
+ * between device bus addresses and CPU physical addresses.  Platforms with a hardware I/O
+ * MMU _must_ turn this off to suppress the bounce buffer handling code in the block and
+ * network device layers.  Platforms with separate bus address spaces _must_ turn this off
+ * and provide a device DMA mapping implementation that takes care of the necessary
+ * address translation.
+ *
+ * For now, the ia64 platforms which may have separate/multiple bus address spaces all
+ * have I/O MMUs which support the merging of physically discontiguous buffers, so we can
+ * use that as the sole factor to determine the setting of PCI_DMA_BUS_IS_PHYS.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
+
+static inline void
+pcibios_set_master (struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void
+pcibios_penalize_isa_irq (int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_MWI 1
+extern int pcibios_prep_mwi (struct pci_dev *);
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* The ia64 platform always supports 64-bit addressing. */
+#define pci_dac_dma_supported(pci_dev, mask)		(1)
+#define pci_dac_page_to_dma(dev,pg,off,dir)		((dma_addr_t) page_to_bus(pg) + (off))
+#define pci_dac_dma_to_page(dev,dma_addr)		(virt_to_page(bus_to_virt(dma_addr)))
+#define pci_dac_dma_to_offset(dev,dma_addr)		offset_in_page(dma_addr)
+#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir)	do { } while (0)
+#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir)	do { mb(); } while (0)
+
+#define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_address(sg)	((sg)->dma_address)
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+				enum pci_mmap_state mmap_state, int write_combine);
+#define HAVE_PCI_LEGACY
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma);
+extern ssize_t pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+				  size_t count);
+extern ssize_t pci_write_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+				   size_t count);
+extern int pci_mmap_legacy_mem(struct kobject *kobj,
+			       struct bin_attribute *attr,
+			       struct vm_area_struct *vma);
+
+#define pci_get_legacy_mem platform_pci_get_legacy_mem
+#define pci_legacy_read platform_pci_legacy_read
+#define pci_legacy_write platform_pci_legacy_write
+
+struct pci_window {
+	struct resource resource;
+	u64 offset;
+};
+
+struct pci_controller {
+	void *acpi_handle;
+	void *iommu;
+	int segment;
+
+	unsigned int windows;
+	struct pci_window *window;
+
+	void *platform_data;
+};
+
+#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
+#define pci_domain_nr(busdev)    (PCI_CONTROLLER(busdev)->segment)
+
+extern struct pci_ops pci_root_ops;
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return (pci_domain_nr(bus) != 0);
+}
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+		struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+		struct resource *res, struct pci_bus_region *region);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#endif /* _ASM_IA64_PCI_H */
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
new file mode 100644
index 000000000000..1e87f19dad56
--- /dev/null
+++ b/include/asm-ia64/percpu.h
@@ -0,0 +1,72 @@
+#ifndef _ASM_IA64_PERCPU_H
+#define _ASM_IA64_PERCPU_H
+
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+
+#ifdef __ASSEMBLY__
+# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
+#else /* !__ASSEMBLY__ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+
+#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
+# define __SMALL_ADDR_AREA	__attribute__((__model__ (__small__)))
+#else
+# define __SMALL_ADDR_AREA
+#endif
+
+#define DECLARE_PER_CPU(type, name)				\
+	extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name)				\
+	__attribute__((__section__(".data.percpu")))		\
+	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/*
+ * Pretty much a literal copy of asm-generic/percpu.h, except that percpu_modcopy() is an
+ * external routine, to avoid include-hell.
+ */
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#define per_cpu(var, cpu)  (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+
+extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
+extern void setup_per_cpu_areas (void);
+extern void *per_cpu_init(void);
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var)			per_cpu__##var
+#define per_cpu_init()				(__phys_per_cpu_start)
+
+#endif	/* SMP */
+
+#define EXPORT_PER_CPU_SYMBOL(var)		EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var)		EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+/*
+ * Be extremely careful when taking the address of this variable!  Due to virtual
+ * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
+ * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
+ * more efficient.
+ */
+#define __ia64_per_cpu_var(var)	(per_cpu__##var)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PERCPU_H */
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
new file mode 100644
index 000000000000..136c60e6bfcc
--- /dev/null
+++ b/include/asm-ia64/perfmon.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _ASM_IA64_PERFMON_H
+#define _ASM_IA64_PERFMON_H
+
+/*
+ * perfmon comamnds supported on all CPU models
+ */
+#define PFM_WRITE_PMCS		0x01
+#define PFM_WRITE_PMDS		0x02
+#define PFM_READ_PMDS		0x03
+#define PFM_STOP		0x04
+#define PFM_START		0x05
+#define PFM_ENABLE		0x06 /* obsolete */
+#define PFM_DISABLE		0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT	0x08
+#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
+#define PFM_RESTART		0x0a
+#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
+#define PFM_GET_FEATURES	0x0c
+#define PFM_DEBUG		0x0d
+#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL	0x0f
+#define PFM_LOAD_CONTEXT	0x10
+#define PFM_UNLOAD_CONTEXT	0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS		0x20
+#define PFM_WRITE_DBRS		0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
+#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
+	unsigned long  ctx_flags;	 /* noblock/block */
+	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
+	unsigned short ctx_reserved1;	 /* for future use */
+	int	       ctx_fd;		 /* return arg: unique identification for context */
+	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
+	unsigned long  ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+	unsigned int	reg_num;	   /* which register */
+	unsigned short	reg_set;	   /* event set for this register */
+	unsigned short	reg_reserved1;	   /* for future use */
+
+	unsigned long	reg_value;	   /* initial pmc/pmd value */
+	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
+
+	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
+	unsigned long	reg_short_reset;   /* reset after counter overflow */
+
+	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
+	unsigned long	reg_random_seed;   /* seed value when randomization is used */
+	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
+	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
+
+	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
+	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
+
+	unsigned long   reg_reserved2[3];   /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+	unsigned int	dbreg_num;		/* which debug register */
+	unsigned short	dbreg_set;		/* event set for this register */
+	unsigned short	dbreg_reserved1;	/* for future use */
+	unsigned long	dbreg_value;		/* value for debug register */
+	unsigned long	dbreg_flags;		/* return: dbreg error */
+	unsigned long	dbreg_reserved2[1];	/* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
+	unsigned int	ft_reserved;	/* reserved for future use */
+	unsigned long	reserved[4];	/* for future use */
+} pfarg_features_t;
+
+typedef struct {
+	pid_t		load_pid;	   /* process to load the context into */
+	unsigned short	load_set;	   /* first event set to load */
+	unsigned short	load_reserved1;	   /* for future use */
+	unsigned long	load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
+	unsigned short  msg_active_set;		/* active set at the time of overflow */
+	unsigned short  msg_reserved1;		/* for future use */
+	unsigned int    msg_reserved2;		/* for future use */
+	unsigned long	msg_tstamp;		/* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+	int		msg_type;		/* type of the message */
+	int		msg_ctx_fd;		/* unique identifier for the context */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL	1	/* an overflow happened */
+#define PFM_MSG_END	2	/* task to which context was attached ended */
+
+typedef union {
+	pfm_ovfl_msg_t	pfm_ovfl_msg;
+	pfm_end_msg_t	pfm_end_msg;
+	pfm_gen_msg_t	pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ		 2U
+#define PFM_VERSION_MIN		 0U
+#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
+
+#ifdef __KERNEL__
+
+extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+
+extern void pfm_save_regs (struct task_struct *);
+extern void pfm_load_regs (struct task_struct *);
+
+extern void pfm_exit_thread(struct task_struct *);
+extern int  pfm_use_debug_registers(struct task_struct *);
+extern int  pfm_release_debug_registers(struct task_struct *);
+extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
+extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
+extern void pfm_init_percpu(void);
+extern void pfm_handle_work(void);
+
+/*
+ * Reset PMD register flags
+ */
+#define PFM_PMD_SHORT_RESET	0
+#define PFM_PMD_LONG_RESET	1
+
+typedef union {
+	unsigned int val;
+	struct {
+		unsigned int notify_user:1;	/* notify user program of overflow */
+		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
+		unsigned int block_task:1;	/* block monitored task on kernel exit */
+		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
+		unsigned int reserved:28;	/* for future use */
+	} bits;
+} pfm_ovfl_ctrl_t;
+
+typedef struct {
+	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
+	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
+	unsigned short  active_set;			/* event set active at the time of the overflow */
+	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
+
+	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
+	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
+	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
+	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
+	unsigned long	pmd_eventid;			/* eventid associated with PMD */
+} pfm_ovfl_arg_t;
+
+
+typedef struct {
+	char		*fmt_name;
+	pfm_uuid_t	fmt_uuid;
+	size_t		fmt_arg_size;
+	unsigned long	fmt_flags;
+
+	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
+	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
+	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
+
+	struct list_head fmt_list;
+} pfm_buffer_fmt_t;
+
+extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
+extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
+
+/*
+ * perfmon interface exported to modules
+ */
+extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+
+/*
+ * describe the content of the local_cpu_date->pfm_syst_info field
+ */
+#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
+#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
+#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_PERFMON_H */
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/include/asm-ia64/perfmon_default_smpl.h
new file mode 100644
index 000000000000..48822c0811d8
--- /dev/null
+++ b/include/asm-ia64/perfmon_default_smpl.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * This file implements the default sampling buffer format
+ * for Linux/ia64 perfmon subsystem.
+ */
+#ifndef __PERFMON_DEFAULT_SMPL_H__
+#define __PERFMON_DEFAULT_SMPL_H__ 1
+
+#define PFM_DEFAULT_SMPL_UUID { \
+		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
+
+/*
+ * format specific parameters (passed at context creation)
+ */
+typedef struct {
+	unsigned long buf_size;		/* size of the buffer in bytes */
+	unsigned int  flags;		/* buffer specific flags */
+	unsigned int  res1;		/* for future use */
+	unsigned long reserved[2];	/* for future use */
+} pfm_default_smpl_arg_t;
+
+/*
+ * combined context+format specific structure. Can be passed
+ * to PFM_CONTEXT_CREATE
+ */
+typedef struct {
+	pfarg_context_t		ctx_arg;
+	pfm_default_smpl_arg_t	buf_arg;
+} pfm_default_smpl_ctx_arg_t;
+
+/*
+ * This header is at the beginning of the sampling buffer returned to the user.
+ * It is directly followed by the first record.
+ */
+typedef struct {
+	unsigned long	hdr_count;		/* how many valid entries */
+	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
+	unsigned long	hdr_reserved2;		/* reserved for future use */
+
+	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
+	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
+
+	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
+	unsigned int	hdr_reserved1;		/* for future use */
+	unsigned long	hdr_reserved[10];	/* for future use */
+} pfm_default_smpl_hdr_t;
+
+/*
+ * Entry header in the sampling buffer.  The header is directly followed
+ * with the values of the PMD registers of interest saved in increasing 
+ * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
+ * on how the session was programmed.
+ *
+ * In the case where multiple counters overflow at the same time, multiple
+ * entries are written consecutively.
+ *
+ * last_reset_value member indicates the initial value of the overflowed PMD. 
+ */
+typedef struct {
+        int             pid;                    /* thread id (for NPTL, this is gettid()) */
+        unsigned char   reserved1[3];           /* reserved for future use */
+        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
+
+        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
+        unsigned long   ip;                     /* where did the overflow interrupt happened  */
+        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
+
+        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  set;                    /* event set active when overflow ocurred   */
+        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
+} pfm_default_smpl_entry_t;
+
+#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
+#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
+#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
+
+#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
+#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
+#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
+
+#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
new file mode 100644
index 000000000000..0f05dc8bd460
--- /dev/null
+++ b/include/asm-ia64/pgalloc.h
@@ -0,0 +1,167 @@
+#ifndef _ASM_IA64_PGALLOC_H
+#define _ASM_IA64_PGALLOC_H
+
+/*
+ * This file contains the functions and defines necessary to allocate
+ * page tables.
+ *
+ * This hopefully works with any (fixed) ia-64 page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/threads.h>
+
+#include <asm/mmu_context.h>
+
+/*
+ * Very stupidly, we used to get new pgd's and pmd's, init their contents
+ * to point to the NULL versions of the next level page table, later on
+ * completely re-init them the same way, then free them up.  This wasted
+ * a lot of work and caused unnecessary memory traffic.  How broken...
+ * We fix this by caching them.
+ */
+#define pgd_quicklist		(local_cpu_data->pgd_quick)
+#define pmd_quicklist		(local_cpu_data->pmd_quick)
+#define pgtable_cache_size	(local_cpu_data->pgtable_cache_sz)
+
+static inline pgd_t*
+pgd_alloc_one_fast (struct mm_struct *mm)
+{
+	unsigned long *ret = NULL;
+
+	preempt_disable();
+
+	ret = pgd_quicklist;
+	if (likely(ret != NULL)) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		--pgtable_cache_size;
+	} else
+		ret = NULL;
+
+	preempt_enable();
+
+	return (pgd_t *) ret;
+}
+
+static inline pgd_t*
+pgd_alloc (struct mm_struct *mm)
+{
+	/* the VM system never calls pgd_alloc_one_fast(), so we do it here. */
+	pgd_t *pgd = pgd_alloc_one_fast(mm);
+
+	if (unlikely(pgd == NULL)) {
+		pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+	}
+	return pgd;
+}
+
+static inline void
+pgd_free (pgd_t *pgd)
+{
+	preempt_disable();
+	*(unsigned long *)pgd = (unsigned long) pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	++pgtable_cache_size;
+	preempt_enable();
+}
+
+static inline void
+pud_populate (struct mm_struct *mm, pud_t *pud_entry, pmd_t *pmd)
+{
+	pud_val(*pud_entry) = __pa(pmd);
+}
+
+static inline pmd_t*
+pmd_alloc_one_fast (struct mm_struct *mm, unsigned long addr)
+{
+	unsigned long *ret = NULL;
+
+	preempt_disable();
+
+	ret = (unsigned long *)pmd_quicklist;
+	if (likely(ret != NULL)) {
+		pmd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		--pgtable_cache_size;
+	}
+
+	preempt_enable();
+
+	return (pmd_t *)ret;
+}
+
+static inline pmd_t*
+pmd_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+	pmd_t *pmd = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+	return pmd;
+}
+
+static inline void
+pmd_free (pmd_t *pmd)
+{
+	preempt_disable();
+	*(unsigned long *)pmd = (unsigned long) pmd_quicklist;
+	pmd_quicklist = (unsigned long *) pmd;
+	++pgtable_cache_size;
+	preempt_enable();
+}
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free(pmd)
+
+static inline void
+pmd_populate (struct mm_struct *mm, pmd_t *pmd_entry, struct page *pte)
+{
+	pmd_val(*pmd_entry) = page_to_phys(pte);
+}
+
+static inline void
+pmd_populate_kernel (struct mm_struct *mm, pmd_t *pmd_entry, pte_t *pte)
+{
+	pmd_val(*pmd_entry) = __pa(pte);
+}
+
+static inline struct page *
+pte_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+
+	return pte;
+}
+
+static inline pte_t *
+pte_alloc_one_kernel (struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+	return pte;
+}
+
+static inline void
+pte_free (struct page *pte)
+{
+	__free_page(pte);
+}
+
+static inline void
+pte_free_kernel (pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+#define __pte_free_tlb(tlb, pte)	tlb_remove_page((tlb), (pte))
+
+extern void check_pgt_cache (void);
+
+#endif /* _ASM_IA64_PGALLOC_H */
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
new file mode 100644
index 000000000000..1757a811f436
--- /dev/null
+++ b/include/asm-ia64/pgtable.h
@@ -0,0 +1,593 @@
+#ifndef _ASM_IA64_PGTABLE_H
+#define _ASM_IA64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the IA-64 page table tree.
+ *
+ * This hopefully works with any (fixed) IA-64 page-size, as defined
+ * in <asm/page.h>.
+ *
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#define IA64_MAX_PHYS_BITS	50	/* max. number of physical address bits (architected) */
+
+/*
+ * First, define the various bits in a PTE.  Note that the PTE format
+ * matches the VHPT short format, the firt doubleword of the VHPD long
+ * format, and the first doubleword of the TLB insertion format.
+ */
+#define _PAGE_P_BIT		0
+#define _PAGE_A_BIT		5
+#define _PAGE_D_BIT		6
+
+#define _PAGE_P			(1 << _PAGE_P_BIT)	/* page present bit */
+#define _PAGE_MA_WB		(0x0 <<  2)	/* write back memory attribute */
+#define _PAGE_MA_UC		(0x4 <<  2)	/* uncacheable memory attribute */
+#define _PAGE_MA_UCE		(0x5 <<  2)	/* UC exported attribute */
+#define _PAGE_MA_WC		(0x6 <<  2)	/* write coalescing memory attribute */
+#define _PAGE_MA_NAT		(0x7 <<  2)	/* not-a-thing attribute */
+#define _PAGE_MA_MASK		(0x7 <<  2)
+#define _PAGE_PL_0		(0 <<  7)	/* privilege level 0 (kernel) */
+#define _PAGE_PL_1		(1 <<  7)	/* privilege level 1 (unused) */
+#define _PAGE_PL_2		(2 <<  7)	/* privilege level 2 (unused) */
+#define _PAGE_PL_3		(3 <<  7)	/* privilege level 3 (user) */
+#define _PAGE_PL_MASK		(3 <<  7)
+#define _PAGE_AR_R		(0 <<  9)	/* read only */
+#define _PAGE_AR_RX		(1 <<  9)	/* read & execute */
+#define _PAGE_AR_RW		(2 <<  9)	/* read & write */
+#define _PAGE_AR_RWX		(3 <<  9)	/* read, write & execute */
+#define _PAGE_AR_R_RW		(4 <<  9)	/* read / read & write */
+#define _PAGE_AR_RX_RWX		(5 <<  9)	/* read & exec / read, write & exec */
+#define _PAGE_AR_RWX_RW		(6 <<  9)	/* read, write & exec / read & write */
+#define _PAGE_AR_X_RX		(7 <<  9)	/* exec & promote / read & exec */
+#define _PAGE_AR_MASK		(7 <<  9)
+#define _PAGE_AR_SHIFT		9
+#define _PAGE_A			(1 << _PAGE_A_BIT)	/* page accessed bit */
+#define _PAGE_D			(1 << _PAGE_D_BIT)	/* page dirty bit */
+#define _PAGE_PPN_MASK		(((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
+#define _PAGE_ED		(__IA64_UL(1) << 52)	/* exception deferral */
+#define _PAGE_PROTNONE		(__IA64_UL(1) << 63)
+
+/* Valid only for a PTE with the present bit cleared: */
+#define _PAGE_FILE		(1 << 1)		/* see swap & file pte remarks below */
+
+#define _PFN_MASK		_PAGE_PPN_MASK
+/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
+#define _PAGE_CHG_MASK	(_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
+
+#define _PAGE_SIZE_4K	12
+#define _PAGE_SIZE_8K	13
+#define _PAGE_SIZE_16K	14
+#define _PAGE_SIZE_64K	16
+#define _PAGE_SIZE_256K	18
+#define _PAGE_SIZE_1M	20
+#define _PAGE_SIZE_4M	22
+#define _PAGE_SIZE_16M	24
+#define _PAGE_SIZE_64M	26
+#define _PAGE_SIZE_256M	28
+#define _PAGE_SIZE_1G	30
+#define _PAGE_SIZE_4G	32
+
+#define __ACCESS_BITS		_PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
+#define __DIRTY_BITS_NO_ED	_PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
+#define __DIRTY_BITS		_PAGE_ED | __DIRTY_BITS_NO_ED
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#define PGDIR_SHIFT		(PAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define PGDIR_SIZE		(__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD		(1UL << (PAGE_SHIFT-3))
+#define USER_PTRS_PER_PGD	(5*PTRS_PER_PGD/8)	/* regions 0-4 are user regions */
+#define FIRST_USER_PGD_NR	0
+
+/*
+ * Definitions for second level:
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table
+ * can map.
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
+
+/*
+ * Definitions for third level:
+ */
+#define PTRS_PER_PTE	(__IA64_UL(1) << (PAGE_SHIFT-3))
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time
+ * they are used, the page is accessed. They are cleared only by the
+ * page-out routines.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_A)
+#define PAGE_SHARED	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
+#define PAGE_READONLY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY_EXEC	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
+#define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
+#define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+
+# ifndef __ASSEMBLY__
+
+#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+
+/*
+ * Next come the mappings that determine how mmap() protection bits
+ * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented.  The
+ * _P version gets used for a private shared memory segment, the _S
+ * version gets used for a shared memory segment with MAP_SHARED on.
+ * In a private shared memory segment, we do a copy-on-write if a task
+ * attempts to write to the page.
+ */
+	/* xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_READONLY	/* write to priv pg -> copy & make writable */
+#define __P011	PAGE_READONLY	/* ditto */
+#define __P100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __P101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED	/* we don't have (and don't need) write-only */
+#define __S011	PAGE_SHARED
+#define __S100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __S101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __S110	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+#define __S111	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+
+#define pgd_ERROR(e)	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#define pmd_ERROR(e)	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pte_ERROR(e)	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page addresses:
+ */
+
+
+/* Quick test to see if ADDR is a (potentially) valid physical address. */
+static inline long
+ia64_phys_addr_valid (unsigned long addr)
+{
+	return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
+}
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for IA-64.
+ */
+#define kern_addr_valid(addr)	(1)
+
+
+/*
+ * Now come the defines and routines to manage and access the three-level
+ * page table.
+ */
+
+/*
+ * On some architectures, special things need to be done when setting
+ * the PTE in a page table.  Nothing special needs to be on IA-64.
+ */
+#define set_pte(ptep, pteval)	(*(ptep) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define RGN_SIZE	(1UL << 61)
+#define RGN_KERNEL	7
+
+#define VMALLOC_START		0xa000000200000000UL
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define VMALLOC_END_INIT	(0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+# define VMALLOC_END		vmalloc_end
+  extern unsigned long vmalloc_end;
+#else
+# define VMALLOC_END		(0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+#endif
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) - 0xa000000000000000UL)
+#define	kc_offset_to_vaddr(o) ((o) + 0xa000000000000000UL)
+
+/*
+ * Conversion functions: convert page frame number (pfn) and a protection value to a page
+ * table entry (pte).
+ */
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
+
+/* Extract pfn from pte.  */
+#define pte_pfn(_pte)		((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+#define pte_modify(_pte, newprot) \
+	(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
+
+#define page_pte_prot(page,prot)	mk_pte(page, prot)
+#define page_pte(page)			page_pte_prot(page, __pgprot(0))
+
+#define pte_none(pte) 			(!pte_val(pte))
+#define pte_present(pte)		(pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,pte)		(pte_val(*(pte)) = 0UL)
+/* pte_page() returns the "struct page *" corresponding to the PTE: */
+#define pte_page(pte)			virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
+
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(!ia64_phys_addr_valid(pmd_val(pmd)))
+#define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
+#define pmd_page_kernel(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
+
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(!ia64_phys_addr_valid(pud_val(pud)))
+#define pud_present(pud)		(pud_val(pud) != 0UL)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
+
+#define pud_page(pud)			((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+#define pte_user(pte)		((pte_val(pte) & _PAGE_PL_MASK) == _PAGE_PL_3)
+#define pte_read(pte)		(((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) < 6)
+#define pte_write(pte)	((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
+#define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
+#define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
+#define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
+#define pte_file(pte)		((pte_val(pte) & _PAGE_FILE) != 0)
+/*
+ * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
+ * access rights:
+ */
+#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~_PAGE_AR_RW))
+#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_AR_RW))
+#define pte_mkexec(pte)		(__pte(pte_val(pte) | _PAGE_AR_RX))
+#define pte_mkold(pte)		(__pte(pte_val(pte) & ~_PAGE_A))
+#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_A))
+#define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
+#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
+
+/*
+ * Macro to a page protection value as "uncacheable".  Note that "protection" is really a
+ * misnomer here as the protection value contains the memory attribute bits, dirty bits,
+ * and various other bits as well.
+ */
+#define pgprot_noncached(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
+
+/*
+ * Macro to make mark a page protection value as "write-combining".
+ * Note that "protection" is really a misnomer here as the protection
+ * value contains the memory attribute bits, dirty bits, and various
+ * other bits as well.  Accesses through a write-combining translation
+ * works bypasses the caches, but does allow for consecutive writes to
+ * be combined into single (but larger) write transactions.
+ */
+#define pgprot_writecombine(prot)	__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
+
+static inline unsigned long
+pgd_index (unsigned long address)
+{
+	unsigned long region = address >> 61;
+	unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
+
+	return (region << (PAGE_SHIFT - 6)) | l1index;
+}
+
+/* The offset in the 1-level directory is given by the 3 region bits
+   (61..63) and the level-1 bits.  */
+static inline pgd_t*
+pgd_offset (struct mm_struct *mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+/* In the kernel's mapped region we completely ignore the region number
+   (since we know it's in region number 5). */
+#define pgd_offset_k(addr) \
+	(init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
+
+/* Look up a pgd entry in the gate area.  On IA-64, the gate-area
+   resides in the kernel-mapped segment, hence we use pgd_offset_k()
+   here.  */
+#define pgd_offset_gate(mm, addr)	pgd_offset_k(addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir,addr) \
+	((pmd_t *) pud_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/*
+ * Find an entry in the third-level page table.  This looks more complicated than it
+ * should be because some platforms place page tables in high memory.
+ */
+#define pte_index(addr)	 	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr)	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_map(dir, addr)
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* atomic versions of the some PTE manipulations: */
+
+static inline int
+ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_A_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+static inline int
+ptep_test_and_clear_dirty (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_D_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_dirty(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkclean(pte));
+	return 1;
+#endif
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	return __pte(xchg((long *) ptep, 0));
+#else
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+#endif
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+static inline int
+pte_same (pte_t a, pte_t b)
+{
+	return pte_val(a) == pte_val(b);
+}
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init (void);
+
+/*
+ * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
+ *	 bits in the swap-type field of the swap pte.  It would be nice to
+ *	 enforce that, but we can't easily include <linux/swap.h> here.
+ *	 (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
+ *
+ * Format of swap pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be zero)
+ *	bits  2- 8: swap-type
+ *	bits  9-62: swap offset
+ *	bit  63   : _PAGE_PROTNONE bit
+ *
+ * Format of file pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be one)
+ *	bits  2-62: file_offset/PAGE_SIZE
+ *	bit  63   : _PAGE_PROTNONE bit
+ */
+#define __swp_type(entry)		(((entry).val >> 2) & 0x7f)
+#define __swp_offset(entry)		(((entry).val << 1) >> 10)
+#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS		61
+#define pte_to_pgoff(pte)		((pte_val(pte) << 1) >> 3)
+#define pgoff_to_pte(off)		((pte_t) { ((off) << 2) | _PAGE_FILE })
+
+/* XXX is this right? */
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern struct page *zero_page_memmap_ptr;
+#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HUGETLB_PGDIR_SHIFT	(HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define HUGETLB_PGDIR_SIZE	(__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
+#define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
+struct mmu_gather;
+extern void hugetlb_free_pgtables(struct mmu_gather *tlb,
+	struct vm_area_struct * prev, unsigned long start, unsigned long end);
+#endif
+
+/*
+ * IA-64 doesn't have any external MMU info: the page tables contain all the necessary
+ * information.  However, we use this routine to take care of any (delayed) i-cache
+ * flushing that may be necessary.
+ */
+extern void lazy_mmu_prot_update (pte_t pte);
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Update PTEP with ENTRY, which is guaranteed to be a less
+ * restrictive PTE.  That is, ENTRY may have the ACCESSED, DIRTY, and
+ * WRITABLE bits turned on, when the value at PTEP did not.  The
+ * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
+ *
+ * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
+ * having to worry about races.  On SMP machines, there are only two
+ * cases where this is true:
+ *
+ *	(1) *PTEP has the PRESENT bit turned OFF
+ *	(2) ENTRY has the DIRTY bit turned ON
+ *
+ * On ia64, we could implement this routine with a cmpxchg()-loop
+ * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
+ * However, like on x86, we can get a more streamlined version by
+ * observing that it is OK to drop ACCESSED bit updates when
+ * SAFELY_WRITABLE is FALSE.  Besides being rare, all that would do is
+ * result in an extra Access-bit fault, which would then turn on the
+ * ACCESSED bit in the low-level fault handler (iaccess_bit or
+ * daccess_bit in ivt.S).
+ */
+#ifdef CONFIG_SMP
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable)	\
+do {											\
+	if (__safely_writable) {							\
+		set_pte(__ptep, __entry);						\
+		flush_tlb_page(__vma, __addr);						\
+	}										\
+} while (0)
+#else
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable)	\
+	ptep_establish(__vma, __addr, __ptep, __entry)
+#endif
+
+#  ifdef CONFIG_VIRTUAL_MEM_MAP
+  /* arch mem_map init routine is needed due to holes in a virtual mem_map */
+#   define __HAVE_ARCH_MEMMAP_INIT
+    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
+			     unsigned long start_pfn);
+#  endif /* CONFIG_VIRTUAL_MEM_MAP */
+# endif /* !__ASSEMBLY__ */
+
+/*
+ * Identity-mapped regions use a large page size.  We'll call such large pages
+ * "granules".  If you can think of a better name that's unambiguous, let me
+ * know...
+ */
+#if defined(CONFIG_IA64_GRANULE_64MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_64M
+#elif defined(CONFIG_IA64_GRANULE_16MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_16M
+#endif
+#define IA64_GRANULE_SIZE	(1 << IA64_GRANULE_SHIFT)
+/*
+ * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
+ */
+#define KERNEL_TR_PAGE_SHIFT	_PAGE_SIZE_64M
+#define KERNEL_TR_PAGE_SIZE	(1 << KERNEL_TR_PAGE_SHIFT)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* These tell get_user_pages() that the first gate page is accessible from user-level.  */
+#define FIXADDR_USER_START	GATE_ADDR
+#define FIXADDR_USER_END	(GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PGD_OFFSET_GATE
+#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+
+/*
+ * Override for pgd_addr_end() to deal with the virtual address space holes
+ * in each region.  In regions 0..4 virtual address bits are used like this:
+ *      +--------+------+--------+-----+-----+--------+
+ *      | pgdhi3 | rsvd | pgdlow | pmd | pte | offset |
+ *      +--------+------+--------+-----+-----+--------+
+ *  'pgdlow' overflows to pgdhi3 (a.k.a. region bits) leaving rsvd==0
+ */
+#define IA64_PGD_OVERFLOW (PGDIR_SIZE << (PAGE_SHIFT-6))
+
+#define pgd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;	\
+ 	if (REGION_NUMBER(__boundary) < 5 && 				\
+	    __boundary & IA64_PGD_OVERFLOW)				\
+		__boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#define pmd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;	\
+ 	if (REGION_NUMBER(__boundary) < 5 &&				\
+	    __boundary & IA64_PGD_OVERFLOW)				\
+		__boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#include <asm-generic/pgtable-nopud.h>
+#include <asm-generic/pgtable.h>
+
+#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h
new file mode 100644
index 000000000000..160258a0528d
--- /dev/null
+++ b/include/asm-ia64/poll.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_POLL_H
+#define _ASM_IA64_POLL_H
+
+/*
+ * poll(2) bit definitions.  Based on <asm-i386/poll.h>.
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* _ASM_IA64_POLL_H */
diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h
new file mode 100644
index 000000000000..adb62272694f
--- /dev/null
+++ b/include/asm-ia64/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_IA64_POSIX_TYPES_H
+#define _ASM_IA64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * Based on <asm-alpha/posix_types.h>.
+ *
+ * Modified 1998-2000, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+# ifdef __KERNEL__
+
+#  ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#  else /* !__GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#  endif /* !__GNUC__ */
+# endif /* __KERNEL__ */
+#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
new file mode 100644
index 000000000000..8769dd9df369
--- /dev/null
+++ b/include/asm-ia64/processor.h
@@ -0,0 +1,698 @@
+#ifndef _ASM_IA64_PROCESSOR_H
+#define _ASM_IA64_PROCESSOR_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ *
+ * 11/24/98	S.Eranian	added ia64_set_iva()
+ * 12/03/99	D. Mosberger	implement thread_saved_pc() via kernel unwind API
+ * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 support
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/kregs.h>
+#include <asm/ptrace.h>
+#include <asm/ustack.h>
+
+/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
+#define ARCH_HAS_SCHED_DOMAIN
+
+#define IA64_NUM_DBG_REGS	8
+/*
+ * Limits for PMC and PMD are set to less than maximum architected values
+ * but should be sufficient for a while
+ */
+#define IA64_NUM_PMC_REGS	32
+#define IA64_NUM_PMD_REGS	32
+
+#define DEFAULT_MAP_BASE	__IA64_UL_CONST(0x2000000000000000)
+#define DEFAULT_TASK_SIZE	__IA64_UL_CONST(0xa000000000000000)
+
+/*
+ * TASK_SIZE really is a mis-named.  It really is the maximum user
+ * space address (plus one).  On IA-64, there are five regions of 2TB
+ * each (assuming 8KB page size), for a total of 8TB of user virtual
+ * address space.
+ */
+#define TASK_SIZE		(current->thread.task_size)
+
+/*
+ * MM_VM_SIZE(mm) gives the maximum address (plus 1) which may contain a mapping for
+ * address-space MM.  Note that with 32-bit tasks, this is still DEFAULT_TASK_SIZE,
+ * because the kernel may have installed helper-mappings above TASK_SIZE.  For example,
+ * for x86 emulation, the LDT and GDT are mapped above TASK_SIZE.
+ */
+#define MM_VM_SIZE(mm)		DEFAULT_TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(current->thread.map_base)
+
+#define IA64_THREAD_FPH_VALID	(__IA64_UL(1) << 0)	/* floating-point high state valid? */
+#define IA64_THREAD_DBG_VALID	(__IA64_UL(1) << 1)	/* debug registers valid? */
+#define IA64_THREAD_PM_VALID	(__IA64_UL(1) << 2)	/* performance registers valid? */
+#define IA64_THREAD_UAC_NOPRINT	(__IA64_UL(1) << 3)	/* don't log unaligned accesses */
+#define IA64_THREAD_UAC_SIGBUS	(__IA64_UL(1) << 4)	/* generate SIGBUS on unaligned acc. */
+							/* bit 5 is currently unused */
+#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6)	/* don't log any fpswa faults */
+#define IA64_THREAD_FPEMU_SIGFPE  (__IA64_UL(1) << 7)	/* send a SIGFPE for fpswa faults */
+
+#define IA64_THREAD_UAC_SHIFT	3
+#define IA64_THREAD_UAC_MASK	(IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
+#define IA64_THREAD_FPEMU_SHIFT	6
+#define IA64_THREAD_FPEMU_MASK	(IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
+
+
+/*
+ * This shift should be large enough to be able to represent 1000000000/itc_freq with good
+ * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
+ * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
+ */
+#define IA64_NSEC_PER_CYC_SHIFT	30
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/types.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/rse.h>
+#include <asm/unwind.h>
+#include <asm/atomic.h>
+#ifdef CONFIG_NUMA
+#include <asm/nodedata.h>
+#endif
+
+/* like above but expressed as bitfields for more efficient access: */
+struct ia64_psr {
+	__u64 reserved0 : 1;
+	__u64 be : 1;
+	__u64 up : 1;
+	__u64 ac : 1;
+	__u64 mfl : 1;
+	__u64 mfh : 1;
+	__u64 reserved1 : 7;
+	__u64 ic : 1;
+	__u64 i : 1;
+	__u64 pk : 1;
+	__u64 reserved2 : 1;
+	__u64 dt : 1;
+	__u64 dfl : 1;
+	__u64 dfh : 1;
+	__u64 sp : 1;
+	__u64 pp : 1;
+	__u64 di : 1;
+	__u64 si : 1;
+	__u64 db : 1;
+	__u64 lp : 1;
+	__u64 tb : 1;
+	__u64 rt : 1;
+	__u64 reserved3 : 4;
+	__u64 cpl : 2;
+	__u64 is : 1;
+	__u64 mc : 1;
+	__u64 it : 1;
+	__u64 id : 1;
+	__u64 da : 1;
+	__u64 dd : 1;
+	__u64 ss : 1;
+	__u64 ri : 2;
+	__u64 ed : 1;
+	__u64 bn : 1;
+	__u64 reserved4 : 19;
+};
+
+/*
+ * CPU type, hardware bug flags, and per-CPU state.  Frequently used
+ * state comes earlier:
+ */
+struct cpuinfo_ia64 {
+	__u32 softirq_pending;
+	__u64 itm_delta;	/* # of clock cycles between clock ticks */
+	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
+	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
+	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
+	__u64 *pgd_quick;
+	__u64 *pmd_quick;
+	__u64 pgtable_cache_sz;
+	__u64 itc_freq;		/* frequency of ITC counter */
+	__u64 proc_freq;	/* frequency of processor */
+	__u64 cyc_per_usec;	/* itc_freq/1000000 */
+	__u64 ptce_base;
+	__u32 ptce_count[2];
+	__u32 ptce_stride[2];
+	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
+
+#ifdef CONFIG_SMP
+	__u64 loops_per_jiffy;
+	int cpu;
+#endif
+
+	/* CPUID-derived information: */
+	__u64 ppn;
+	__u64 features;
+	__u8 number;
+	__u8 revision;
+	__u8 model;
+	__u8 family;
+	__u8 archrev;
+	char vendor[16];
+
+#ifdef CONFIG_NUMA
+	struct ia64_node_data *node_data;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+
+/*
+ * The "local" data variable.  It refers to the per-CPU data of the currently executing
+ * CPU, much like "current" points to the per-task data of the currently executing task.
+ * Do not use the address of local_cpu_data, since it will be different from
+ * cpu_data(smp_processor_id())!
+ */
+#define local_cpu_data		(&__ia64_per_cpu_var(cpu_info))
+#define cpu_data(cpu)		(&per_cpu(cpu_info, cpu))
+
+extern void identify_cpu (struct cpuinfo_ia64 *);
+extern void print_cpu_info (struct cpuinfo_ia64 *);
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define SET_UNALIGN_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
+				| (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK));	\
+	0;											\
+})
+#define GET_UNALIGN_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#define SET_FPEMU_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK)		\
+			  | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK));	\
+	0;											\
+})
+#define GET_FPEMU_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#ifdef CONFIG_IA32_SUPPORT
+struct desc_struct {
+	unsigned int a, b;
+};
+
+#define desc_empty(desc)		(!((desc)->a + (desc)->b))
+#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+#define GDT_ENTRY_TLS_ENTRIES	3
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+struct partial_page_list;
+#endif
+
+struct thread_struct {
+	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
+	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
+	__u8 on_ustack;			/* executing on user-stacks? */
+	__u8 pad[3];
+	__u64 ksp;			/* kernel stack pointer */
+	__u64 map_base;			/* base address for get_unmapped_area() */
+	__u64 task_size;		/* limit for task size */
+	__u64 rbs_bot;			/* the base address for the RBS */
+	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
+
+#ifdef CONFIG_IA32_SUPPORT
+	__u64 eflag;			/* IA32 EFLAGS reg */
+	__u64 fsr;			/* IA32 floating pt status reg */
+	__u64 fcr;			/* IA32 floating pt control reg */
+	__u64 fir;			/* IA32 fp except. instr. reg */
+	__u64 fdr;			/* IA32 fp except. data reg */
+	__u64 old_k1;			/* old value of ar.k1 */
+	__u64 old_iob;			/* old IOBase value */
+	struct partial_page_list *ppl;	/* partial page list for 4K page size issue */
+        /* cached TLS descriptors. */
+	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+
+# define INIT_THREAD_IA32	.eflag =	0,			\
+				.fsr =		0,			\
+				.fcr =		0x17800000037fULL,	\
+				.fir =		0,			\
+				.fdr =		0,			\
+				.old_k1 =	0,			\
+				.old_iob =	0,			\
+				.ppl =		NULL,
+#else
+# define INIT_THREAD_IA32
+#endif /* CONFIG_IA32_SUPPORT */
+#ifdef CONFIG_PERFMON
+	__u64 pmcs[IA64_NUM_PMC_REGS];
+	__u64 pmds[IA64_NUM_PMD_REGS];
+	void *pfm_context;		     /* pointer to detailed PMU context */
+	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
+# define INIT_THREAD_PM		.pmcs =			{0UL, },  \
+				.pmds =			{0UL, },  \
+				.pfm_context =		NULL,     \
+				.pfm_needs_checking =	0UL,
+#else
+# define INIT_THREAD_PM
+#endif
+	__u64 dbr[IA64_NUM_DBG_REGS];
+	__u64 ibr[IA64_NUM_DBG_REGS];
+	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
+};
+
+#define INIT_THREAD {						\
+	.flags =	0,					\
+	.on_ustack =	0,					\
+	.ksp =		0,					\
+	.map_base =	DEFAULT_MAP_BASE,			\
+	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
+	.task_size =	DEFAULT_TASK_SIZE,			\
+	.last_fph_cpu =  -1,					\
+	INIT_THREAD_IA32					\
+	INIT_THREAD_PM						\
+	.dbr =		{0, },					\
+	.ibr =		{0, },					\
+	.fph =		{{{{0}}}, }				\
+}
+
+#define start_thread(regs,new_ip,new_sp) do {							\
+	set_fs(USER_DS);									\
+	regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL))		\
+			 & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS));		\
+	regs->cr_iip = new_ip;									\
+	regs->ar_rsc = 0xf;		/* eager mode, privilege level 3 */			\
+	regs->ar_rnat = 0;									\
+	regs->ar_bspstore = current->thread.rbs_bot;						\
+	regs->ar_fpsr = FPSR_DEFAULT;								\
+	regs->loadrs = 0;									\
+	regs->r8 = current->mm->dumpable;	/* set "don't zap registers" flag */		\
+	regs->r12 = new_sp - 16;	/* allocate 16 byte scratch area */			\
+	if (unlikely(!current->mm->dumpable)) {							\
+		/*										\
+		 * Zap scratch regs to avoid leaking bits between processes with different	\
+		 * uid/privileges.								\
+		 */										\
+		regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0;					\
+		regs->r1 = 0; regs->r9  = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0;	\
+	}											\
+} while (0)
+
+/* Forward declarations, a strange C thing... */
+struct mm_struct;
+struct task_struct;
+
+/*
+ * Free all resources held by a thread. This is called after the
+ * parent of DEAD_TASK has collected the exit status of the task via
+ * wait().
+ */
+#define release_thread(dead_task)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE 1: Only a kernel-only process (ie the swapper or direct
+ * descendants who haven't done an "execve()") should use this: it
+ * will work within a system call from a "real" process, but the
+ * process memory space will not be free'd until both the parent and
+ * the child have exited.
+ *
+ * NOTE 2: This MUST NOT be an inlined function.  Otherwise, we get
+ * into trouble in init/main.c when the child thread returns to
+ * do_basic_setup() and the timing is such that free_initmem() has
+ * been called already.
+ */
+extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Get wait channel for task P.  */
+extern unsigned long get_wchan (struct task_struct *p);
+
+/* Return instruction pointer of blocked task TSK.  */
+#define KSTK_EIP(tsk)					\
+  ({							\
+	struct pt_regs *_regs = ia64_task_regs(tsk);	\
+	_regs->cr_iip + ia64_psr(_regs)->ri;		\
+  })
+
+/* Return stack pointer of blocked task TSK.  */
+#define KSTK_ESP(tsk)  ((tsk)->thread.ksp)
+
+extern void ia64_getreg_unknown_kr (void);
+extern void ia64_setreg_unknown_kr (void);
+
+#define ia64_get_kr(regnum)					\
+({								\
+	unsigned long r = 0;					\
+								\
+	switch (regnum) {					\
+	    case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break;	\
+	    case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break;	\
+	    case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break;	\
+	    case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break;	\
+	    case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break;	\
+	    case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break;	\
+	    case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break;	\
+	    case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break;	\
+	    default: ia64_getreg_unknown_kr(); break;		\
+	}							\
+	r;							\
+})
+
+#define ia64_set_kr(regnum, r) 					\
+({								\
+	switch (regnum) {					\
+	    case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break;	\
+	    case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break;	\
+	    case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break;	\
+	    case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break;	\
+	    case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break;	\
+	    case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break;	\
+	    case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break;	\
+	    case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break;	\
+	    default: ia64_setreg_unknown_kr(); break;		\
+	}							\
+})
+
+/*
+ * The following three macros can't be inline functions because we don't have struct
+ * task_struct at this point.
+ */
+
+/* Return TRUE if task T owns the fph partition of the CPU we're running on. */
+#define ia64_is_local_fpu_owner(t)								\
+({												\
+	struct task_struct *__ia64_islfo_task = (t);						\
+	(__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id()				\
+	 && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER));	\
+})
+
+/* Mark task T as owning the fph partition of the CPU we're running on. */
+#define ia64_set_local_fpu_owner(t) do {						\
+	struct task_struct *__ia64_slfo_task = (t);					\
+	__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id();			\
+	ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task);		\
+} while (0)
+
+/* Mark the fph partition of task T as being invalid on all CPUs.  */
+#define ia64_drop_fpu(t)	((t)->thread.last_fph_cpu = -1)
+
+extern void __ia64_init_fpu (void);
+extern void __ia64_save_fpu (struct ia64_fpreg *fph);
+extern void __ia64_load_fpu (struct ia64_fpreg *fph);
+extern void ia64_save_debug_regs (unsigned long *save_area);
+extern void ia64_load_debug_regs (unsigned long *save_area);
+
+#ifdef CONFIG_IA32_SUPPORT
+extern void ia32_save_state (struct task_struct *task);
+extern void ia32_load_state (struct task_struct *task);
+#endif
+
+#define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+#define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+
+/* load fp 0.0 into fph */
+static inline void
+ia64_init_fpu (void) {
+	ia64_fph_enable();
+	__ia64_init_fpu();
+	ia64_fph_disable();
+}
+
+/* save f32-f127 at FPH */
+static inline void
+ia64_save_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_save_fpu(fph);
+	ia64_fph_disable();
+}
+
+/* load f32-f127 from FPH */
+static inline void
+ia64_load_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_load_fpu(fph);
+	ia64_fph_disable();
+}
+
+static inline __u64
+ia64_clear_ic (void)
+{
+	__u64 psr;
+	psr = ia64_getreg(_IA64_REG_PSR);
+	ia64_stop();
+	ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
+	ia64_srlz_i();
+	return psr;
+}
+
+/*
+ * Restore the psr.
+ */
+static inline void
+ia64_set_psr (__u64 psr)
+{
+	ia64_stop();
+	ia64_setreg(_IA64_REG_PSR_L, psr);
+	ia64_srlz_d();
+}
+
+/*
+ * Insert a translation into an instruction and/or data translation
+ * register.
+ */
+static inline void
+ia64_itr (__u64 target_mask, __u64 tr_num,
+	  __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	if (target_mask & 0x1)
+		ia64_itri(tr_num, pte);
+	if (target_mask & 0x2)
+		ia64_itrd(tr_num, pte);
+}
+
+/*
+ * Insert a translation into the instruction and/or data translation
+ * cache.
+ */
+static inline void
+ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	/* as per EAS2.6, itc must be the last instruction in an instruction group */
+	if (target_mask & 0x1)
+		ia64_itci(pte);
+	if (target_mask & 0x2)
+		ia64_itcd(pte);
+}
+
+/*
+ * Purge a range of addresses from instruction and/or data translation
+ * register(s).
+ */
+static inline void
+ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
+{
+	if (target_mask & 0x1)
+		ia64_ptri(vmaddr, (log_size << 2));
+	if (target_mask & 0x2)
+		ia64_ptrd(vmaddr, (log_size << 2));
+}
+
+/* Set the interrupt vector address.  The address must be suitably aligned (32KB).  */
+static inline void
+ia64_set_iva (void *ivt_addr)
+{
+	ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
+	ia64_srlz_i();
+}
+
+/* Set the page table address and control bits.  */
+static inline void
+ia64_set_pta (__u64 pta)
+{
+	/* Note: srlz.i implies srlz.d */
+	ia64_setreg(_IA64_REG_CR_PTA, pta);
+	ia64_srlz_i();
+}
+
+static inline void
+ia64_eoi (void)
+{
+	ia64_setreg(_IA64_REG_CR_EOI, 0);
+	ia64_srlz_d();
+}
+
+#define cpu_relax()	ia64_hint(ia64_hint_pause)
+
+static inline void
+ia64_set_lrr0 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR0, val);
+	ia64_srlz_d();
+}
+
+static inline void
+ia64_set_lrr1 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR1, val);
+	ia64_srlz_d();
+}
+
+
+/*
+ * Given the address to which a spill occurred, return the unat bit
+ * number that corresponds to this address.
+ */
+static inline __u64
+ia64_unat_pos (void *spill_addr)
+{
+	return ((__u64) spill_addr >> 3) & 0x3f;
+}
+
+/*
+ * Set the NaT bit of an integer register which was spilled at address
+ * SPILL_ADDR.  UNAT is the mask to be updated.
+ */
+static inline void
+ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
+{
+	__u64 bit = ia64_unat_pos(spill_addr);
+	__u64 mask = 1UL << bit;
+
+	*unat = (*unat & ~mask) | (nat << bit);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * Note that the only way T can block is through a call to schedule() -> switch_to().
+ */
+static inline unsigned long
+thread_saved_pc (struct task_struct *t)
+{
+	struct unw_frame_info info;
+	unsigned long ip;
+
+	unw_init_from_blocked_task(&info, t);
+	if (unw_unwind(&info) < 0)
+		return 0;
+	unw_get_ip(&info, &ip);
+	return ip;
+}
+
+/*
+ * Get the current instruction/program counter value.
+ */
+#define current_text_addr() \
+	({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
+
+static inline __u64
+ia64_get_ivr (void)
+{
+	__u64 r;
+	ia64_srlz_d();
+	r = ia64_getreg(_IA64_REG_CR_IVR);
+	ia64_srlz_d();
+	return r;
+}
+
+static inline void
+ia64_set_dbr (__u64 regnum, __u64 value)
+{
+	__ia64_set_dbr(regnum, value);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+}
+
+static inline __u64
+ia64_get_dbr (__u64 regnum)
+{
+	__u64 retval;
+
+	retval = __ia64_get_dbr(regnum);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+	return retval;
+}
+
+static inline __u64
+ia64_rotr (__u64 w, __u64 n)
+{
+	return (w >> n) | (w << (64 - n));
+}
+
+#define ia64_rotl(w,n)	ia64_rotr((w), (64) - (n))
+
+/*
+ * Take a mapped kernel address and return the equivalent address
+ * in the region 7 identity mapped virtual area.
+ */
+static inline void *
+ia64_imva (void *addr)
+{
+	void *result;
+	result = (void *) ia64_tpa(addr);
+	return __va(result);
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define PREFETCH_STRIDE			L1_CACHE_BYTES
+
+static inline void
+prefetch (const void *x)
+{
+	 ia64_lfetch(ia64_lfhint_none, x);
+}
+
+static inline void
+prefetchw (const void *x)
+{
+	ia64_lfetch_excl(ia64_lfhint_none, x);
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern unsigned long boot_option_idle_override;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
new file mode 100644
index 000000000000..0bef19538406
--- /dev/null
+++ b/include/asm-ia64/ptrace.h
@@ -0,0 +1,337 @@
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ *	Suresh Siddha <suresh.b.siddha@intel.com>
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98	S. Eranian	added pt_regs & switch_stack
+ * 12/21/98	D. Mosberger	updated to match latest code
+ *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
+ *
+ */
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ *            +----------------------+	-------	IA64_STK_OFFSET
+ *     	      |			     |	 ^
+ *            | struct pt_regs       |	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *	      |			     |	 |
+ *     	      |	   memory stack	     |	 |
+ *	      |	(growing downwards)  |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *            | struct switch_stack  |	 |
+ *	      |			     |	 |
+ *	      +----------------------+	 |
+ *	      |			     |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *	      |	 register stack	     |	 |
+ *	      |	(growing upwards)    |	 |
+ *            |			     |	 |
+ *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
+ *            |  struct thread_info  |	 |  ^
+ *	      +----------------------+	 |  |
+ *	      |			     |	 |  |
+ *            |  struct task_struct  |	 |  |
+ * current -> |			     |   |  |
+ *	      +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/offsets.h>
+
+/*
+ * Base-2 logarithm of number of pages to allocate per task structure
+ * (including register backing store and memory stack):
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define KERNEL_STACK_SIZE_ORDER		3
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define KERNEL_STACK_SIZE_ORDER		2
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define KERNEL_STACK_SIZE_ORDER		1
+#else
+# define KERNEL_STACK_SIZE_ORDER		0
+#endif
+
+#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
+
+#define KERNEL_STACK_SIZE		IA64_STK_OFFSET
+
+#ifndef __ASSEMBLY__
+
+#include <asm/current.h>
+#include <asm/page.h>
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;		/* scratch */
+	unsigned long b7;		/* scratch */
+
+	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd;           /* reserved for future use (scratch) */
+
+	unsigned long r8;		/* scratch (return value register 0) */
+	unsigned long r9;		/* scratch (return value register 1) */
+	unsigned long r10;		/* scratch (return value register 2) */
+	unsigned long r11;		/* scratch (return value register 3) */
+
+	unsigned long cr_ipsr;		/* interrupted task's psr */
+	unsigned long cr_iip;		/* interrupted task's instruction pointer */
+	/*
+	 * interrupted task's function state; if bit 63 is cleared, it
+	 * contains syscall's ar.pfs.pfm:
+	 */
+	unsigned long cr_ifs;
+
+	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;		/* prev function state  */
+	unsigned long ar_rsc;		/* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0: */
+	unsigned long ar_rnat;		/* RSE NaT */
+	unsigned long ar_bspstore;	/* RSE bspstore */
+
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+	unsigned long b0;		/* return pointer (bp) */
+	unsigned long loadrs;		/* size of dirty partition << 16 */
+
+	unsigned long r1;		/* the gp pointer */
+	unsigned long r12;		/* interrupted task's memory stack pointer */
+	unsigned long r13;		/* thread pointer */
+
+	unsigned long ar_fpsr;		/* floating point status (preserved) */
+	unsigned long r15;		/* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+
+	unsigned long r14;		/* scratch */
+	unsigned long r2;		/* scratch */
+	unsigned long r3;		/* scratch */
+
+	/* The following registers are saved by SAVE_REST: */
+	unsigned long r16;		/* scratch */
+	unsigned long r17;		/* scratch */
+	unsigned long r18;		/* scratch */
+	unsigned long r19;		/* scratch */
+	unsigned long r20;		/* scratch */
+	unsigned long r21;		/* scratch */
+	unsigned long r22;		/* scratch */
+	unsigned long r23;		/* scratch */
+	unsigned long r24;		/* scratch */
+	unsigned long r25;		/* scratch */
+	unsigned long r26;		/* scratch */
+	unsigned long r27;		/* scratch */
+	unsigned long r28;		/* scratch */
+	unsigned long r29;		/* scratch */
+	unsigned long r30;		/* scratch */
+	unsigned long r31;		/* scratch */
+
+	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;		/* scratch */
+	struct ia64_fpreg f7;		/* scratch */
+	struct ia64_fpreg f8;		/* scratch */
+	struct ia64_fpreg f9;		/* scratch */
+	struct ia64_fpreg f10;		/* scratch */
+	struct ia64_fpreg f11;		/* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch.  This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+	unsigned long caller_unat;	/* user NaT collection register (preserved) */
+	unsigned long ar_fpsr;		/* floating-point status register */
+
+	struct ia64_fpreg f2;		/* preserved */
+	struct ia64_fpreg f3;		/* preserved */
+	struct ia64_fpreg f4;		/* preserved */
+	struct ia64_fpreg f5;		/* preserved */
+
+	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f16;		/* preserved */
+	struct ia64_fpreg f17;		/* preserved */
+	struct ia64_fpreg f18;		/* preserved */
+	struct ia64_fpreg f19;		/* preserved */
+	struct ia64_fpreg f20;		/* preserved */
+	struct ia64_fpreg f21;		/* preserved */
+	struct ia64_fpreg f22;		/* preserved */
+	struct ia64_fpreg f23;		/* preserved */
+	struct ia64_fpreg f24;		/* preserved */
+	struct ia64_fpreg f25;		/* preserved */
+	struct ia64_fpreg f26;		/* preserved */
+	struct ia64_fpreg f27;		/* preserved */
+	struct ia64_fpreg f28;		/* preserved */
+	struct ia64_fpreg f29;		/* preserved */
+	struct ia64_fpreg f30;		/* preserved */
+	struct ia64_fpreg f31;		/* preserved */
+
+	unsigned long r4;		/* preserved */
+	unsigned long r5;		/* preserved */
+	unsigned long r6;		/* preserved */
+	unsigned long r7;		/* preserved */
+
+	unsigned long b0;		/* so we can force a direct return in copy_thread */
+	unsigned long b1;
+	unsigned long b2;
+	unsigned long b3;
+	unsigned long b4;
+	unsigned long b5;
+
+	unsigned long ar_pfs;		/* previous function state */
+	unsigned long ar_lc;		/* loop counter (preserved) */
+	unsigned long ar_unat;		/* NaT bits for r4-r7 */
+	unsigned long ar_rnat;		/* RSE NaT collection register */
+	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+};
+
+#ifdef __KERNEL__
+/*
+ * We use the ia64_psr(regs)->ri to determine which of the three
+ * instructions in bundle (16 bytes) took the sample. Generate
+ * the canonical representation by adding to instruction pointer.
+ */
+# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
+/* Conserve space in histogram by encoding slot bits in address
+ * bits 2 and 3 rather than bits 0 and 1.
+ */
+#define profile_pc(regs)						\
+({									\
+	unsigned long __ip = instruction_pointer(regs);			\
+	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
+})
+
+  /* given a pointer to a task_struct, return the user's pt_regs */
+# define ia64_task_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
+# define ia64_psr(regs)			((struct ia64_psr *) &(regs)->cr_ipsr)
+# define user_mode(regs)		(((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
+# define user_stack(task,regs)	((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
+# define fsys_mode(task,regs)					\
+  ({								\
+	  struct task_struct *_task = (task);			\
+	  struct pt_regs *_regs = (regs);			\
+	  !user_mode(_regs) && user_stack(_task, _regs);	\
+  })
+
+  /*
+   * System call handlers that, upon successful completion, need to return a negative value
+   * should call force_successful_syscall_return() right before returning.  On architectures
+   * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
+   * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
+   * flag will not get set.  On architectures which do not support a separate error flag,
+   * the macro is a no-op and the spurious error condition needs to be filtered out by some
+   * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
+   * or something along those lines).
+   *
+   * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
+   */
+# define force_successful_syscall_return()	(ia64_task_regs(current)->r8 = 0)
+
+  struct task_struct;			/* forward decl */
+  struct unw_frame_info;		/* forward decl */
+
+  extern void show_regs (struct pt_regs *);
+  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
+  extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
+					      unsigned long *);
+  extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long *);
+  extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long);
+  extern void ia64_flush_fph (struct task_struct *);
+  extern void ia64_sync_fph (struct task_struct *);
+  extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
+				  unsigned long, unsigned long);
+
+  /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
+  extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
+  /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
+  extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
+
+  extern void ia64_increment_ip (struct pt_regs *pt);
+  extern void ia64_decrement_ip (struct pt_regs *pt);
+
+#endif /* !__KERNEL__ */
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+	unsigned long nat;
+	unsigned long cr_iip;
+	unsigned long cfm;
+	unsigned long cr_ipsr;
+	unsigned long pr;
+
+	unsigned long gr[32];
+	unsigned long br[8];
+	unsigned long ar[128];
+	struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC	16
+#define PT_AUR_BSP	17
+#define PT_AUR_BSPSTORE	18
+#define PT_AUR_RNAT	19
+#define PT_AUR_CCV	32
+#define PT_AUR_UNAT	36
+#define PT_AUR_FPSR	40
+#define PT_AUR_PFS	64
+#define PT_AUR_LC	65
+#define PT_AUR_EC	66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#endif /* _ASM_IA64_PTRACE_H */
diff --git a/include/asm-ia64/ptrace_offsets.h b/include/asm-ia64/ptrace_offsets.h
new file mode 100644
index 000000000000..b712773c759e
--- /dev/null
+++ b/include/asm-ia64/ptrace_offsets.h
@@ -0,0 +1,268 @@
+#ifndef _ASM_IA64_PTRACE_OFFSETS_H
+#define _ASM_IA64_PTRACE_OFFSETS_H
+
+/*
+ * Copyright (C) 1999, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
+ * virtual structure that would have the following definition:
+ *
+ *	struct uarea {
+ *		struct ia64_fpreg fph[96];		// f32-f127
+ *		unsigned long nat_bits;
+ *		unsigned long empty1;
+ *		struct ia64_fpreg f2;			// f2-f5
+ *			:
+ *		struct ia64_fpreg f5;
+ *		struct ia64_fpreg f10;			// f10-f31
+ *			:
+ *		struct ia64_fpreg f31;
+ *		unsigned long r4;			// r4-r7
+ *			:
+ *		unsigned long r7;
+ *		unsigned long b1;			// b1-b5
+ *			:
+ *		unsigned long b5;
+ *		unsigned long ar_ec;
+ *		unsigned long ar_lc;
+ *		unsigned long empty2[5];
+ *		unsigned long cr_ipsr;
+ *		unsigned long cr_iip;
+ *		unsigned long cfm;
+ *		unsigned long ar_unat;
+ *		unsigned long ar_pfs;
+ *		unsigned long ar_rsc;
+ *		unsigned long ar_rnat;
+ *		unsigned long ar_bspstore;
+ *		unsigned long pr;
+ *		unsigned long b6;
+ *		unsigned long ar_bsp;
+ *		unsigned long r1;
+ *		unsigned long r2;
+ *		unsigned long r3;
+ *		unsigned long r12;
+ *		unsigned long r13;
+ *		unsigned long r14;
+ *		unsigned long r15;
+ *		unsigned long r8;
+ *		unsigned long r9;
+ *		unsigned long r10;
+ *		unsigned long r11;
+ *		unsigned long r16;
+ *			:
+ *		unsigned long r31;
+ *		unsigned long ar_ccv;
+ *		unsigned long ar_fpsr;
+ *		unsigned long b0;
+ *		unsigned long b7;
+ *		unsigned long f6;
+ *		unsigned long f7;
+ *		unsigned long f8;
+ *		unsigned long f9;
+ *		unsigned long ar_csd;
+ *		unsigned long ar_ssd;
+ *		unsigned long rsvd1[710];
+ *		unsigned long dbr[8];
+ *		unsigned long rsvd2[504];
+ *		unsigned long ibr[8];
+ *		unsigned long rsvd3[504];
+ *		unsigned long pmd[4];
+ *	}
+ */
+
+/* fph: */
+#define PT_F32			0x0000
+#define PT_F33			0x0010
+#define PT_F34			0x0020
+#define PT_F35			0x0030
+#define PT_F36			0x0040
+#define PT_F37			0x0050
+#define PT_F38			0x0060
+#define PT_F39			0x0070
+#define PT_F40			0x0080
+#define PT_F41			0x0090
+#define PT_F42			0x00a0
+#define PT_F43			0x00b0
+#define PT_F44			0x00c0
+#define PT_F45			0x00d0
+#define PT_F46			0x00e0
+#define PT_F47			0x00f0
+#define PT_F48			0x0100
+#define PT_F49			0x0110
+#define PT_F50			0x0120
+#define PT_F51			0x0130
+#define PT_F52			0x0140
+#define PT_F53			0x0150
+#define PT_F54			0x0160
+#define PT_F55			0x0170
+#define PT_F56			0x0180
+#define PT_F57			0x0190
+#define PT_F58			0x01a0
+#define PT_F59			0x01b0
+#define PT_F60			0x01c0
+#define PT_F61			0x01d0
+#define PT_F62			0x01e0
+#define PT_F63			0x01f0
+#define PT_F64			0x0200
+#define PT_F65			0x0210
+#define PT_F66			0x0220
+#define PT_F67			0x0230
+#define PT_F68			0x0240
+#define PT_F69			0x0250
+#define PT_F70			0x0260
+#define PT_F71			0x0270
+#define PT_F72			0x0280
+#define PT_F73			0x0290
+#define PT_F74			0x02a0
+#define PT_F75			0x02b0
+#define PT_F76			0x02c0
+#define PT_F77			0x02d0
+#define PT_F78			0x02e0
+#define PT_F79			0x02f0
+#define PT_F80			0x0300
+#define PT_F81			0x0310
+#define PT_F82			0x0320
+#define PT_F83			0x0330
+#define PT_F84			0x0340
+#define PT_F85			0x0350
+#define PT_F86			0x0360
+#define PT_F87			0x0370
+#define PT_F88			0x0380
+#define PT_F89			0x0390
+#define PT_F90			0x03a0
+#define PT_F91			0x03b0
+#define PT_F92			0x03c0
+#define PT_F93			0x03d0
+#define PT_F94			0x03e0
+#define PT_F95			0x03f0
+#define PT_F96			0x0400
+#define PT_F97			0x0410
+#define PT_F98			0x0420
+#define PT_F99			0x0430
+#define PT_F100			0x0440
+#define PT_F101			0x0450
+#define PT_F102			0x0460
+#define PT_F103			0x0470
+#define PT_F104			0x0480
+#define PT_F105			0x0490
+#define PT_F106			0x04a0
+#define PT_F107			0x04b0
+#define PT_F108			0x04c0
+#define PT_F109			0x04d0
+#define PT_F110			0x04e0
+#define PT_F111			0x04f0
+#define PT_F112			0x0500
+#define PT_F113			0x0510
+#define PT_F114			0x0520
+#define PT_F115			0x0530
+#define PT_F116			0x0540
+#define PT_F117			0x0550
+#define PT_F118			0x0560
+#define PT_F119			0x0570
+#define PT_F120			0x0580
+#define PT_F121			0x0590
+#define PT_F122			0x05a0
+#define PT_F123			0x05b0
+#define PT_F124			0x05c0
+#define PT_F125			0x05d0
+#define PT_F126			0x05e0
+#define PT_F127			0x05f0
+
+#define PT_NAT_BITS		0x0600
+
+#define PT_F2			0x0610
+#define PT_F3			0x0620
+#define PT_F4			0x0630
+#define PT_F5			0x0640
+#define PT_F10			0x0650
+#define PT_F11			0x0660
+#define PT_F12			0x0670
+#define PT_F13			0x0680
+#define PT_F14			0x0690
+#define PT_F15			0x06a0
+#define PT_F16			0x06b0
+#define PT_F17			0x06c0
+#define PT_F18			0x06d0
+#define PT_F19			0x06e0
+#define PT_F20			0x06f0
+#define PT_F21			0x0700
+#define PT_F22			0x0710
+#define PT_F23			0x0720
+#define PT_F24			0x0730
+#define PT_F25			0x0740
+#define PT_F26			0x0750
+#define PT_F27			0x0760
+#define PT_F28			0x0770
+#define PT_F29			0x0780
+#define PT_F30			0x0790
+#define PT_F31			0x07a0
+#define PT_R4			0x07b0
+#define PT_R5			0x07b8
+#define PT_R6			0x07c0
+#define PT_R7			0x07c8
+
+#define PT_B1			0x07d8
+#define PT_B2			0x07e0
+#define PT_B3			0x07e8
+#define PT_B4			0x07f0
+#define PT_B5			0x07f8
+
+#define PT_AR_EC		0x0800
+#define PT_AR_LC		0x0808
+
+#define PT_CR_IPSR		0x0830
+#define PT_CR_IIP		0x0838
+#define PT_CFM			0x0840
+#define PT_AR_UNAT		0x0848
+#define PT_AR_PFS		0x0850
+#define PT_AR_RSC		0x0858
+#define PT_AR_RNAT		0x0860
+#define PT_AR_BSPSTORE		0x0868
+#define PT_PR			0x0870
+#define PT_B6			0x0878
+#define PT_AR_BSP		0x0880	/* note: this points to the *end* of the backing store! */
+#define PT_R1			0x0888
+#define PT_R2			0x0890
+#define PT_R3			0x0898
+#define PT_R12			0x08a0
+#define PT_R13			0x08a8
+#define PT_R14			0x08b0
+#define PT_R15			0x08b8
+#define PT_R8 			0x08c0
+#define PT_R9			0x08c8
+#define PT_R10			0x08d0
+#define PT_R11			0x08d8
+#define PT_R16			0x08e0
+#define PT_R17			0x08e8
+#define PT_R18			0x08f0
+#define PT_R19			0x08f8
+#define PT_R20			0x0900
+#define PT_R21			0x0908
+#define PT_R22			0x0910
+#define PT_R23			0x0918
+#define PT_R24			0x0920
+#define PT_R25			0x0928
+#define PT_R26			0x0930
+#define PT_R27			0x0938
+#define PT_R28			0x0940
+#define PT_R29			0x0948
+#define PT_R30			0x0950
+#define PT_R31			0x0958
+#define PT_AR_CCV		0x0960
+#define PT_AR_FPSR		0x0968
+#define PT_B0			0x0970
+#define PT_B7			0x0978
+#define PT_F6			0x0980
+#define PT_F7			0x0990
+#define PT_F8			0x09a0
+#define PT_F9			0x09b0
+#define PT_AR_CSD		0x09c0
+#define PT_AR_SSD		0x09c8
+
+#define PT_DBR			0x2000	/* data breakpoint registers */
+#define PT_IBR			0x3000	/* instruction breakpoint registers */
+#define PT_PMD			0x4000	/* performance monitoring counters */
+
+#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/include/asm-ia64/resource.h b/include/asm-ia64/resource.h
new file mode 100644
index 000000000000..77b1eee01f30
--- /dev/null
+++ b/include/asm-ia64/resource.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_IA64_RESOURCE_H
+#define _ASM_IA64_RESOURCE_H
+
+#include <asm/ustack.h>
+#define _STK_LIM_MAX	DEFAULT_USER_STACK_SIZE
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/include/asm-ia64/rse.h b/include/asm-ia64/rse.h
new file mode 100644
index 000000000000..02830a3b0196
--- /dev/null
+++ b/include/asm-ia64/rse.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_RSE_H
+#define _ASM_IA64_RSE_H
+
+/*
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Register stack engine related helper functions.  This file may be
+ * used in applications, so be careful about the name-space and give
+ * some consideration to non-GNU C compilers (though __inline__ is
+ * fine).
+ */
+
+static __inline__ unsigned long
+ia64_rse_slot_num (unsigned long *addr)
+{
+	return (((unsigned long) addr) >> 3) & 0x3f;
+}
+
+/*
+ * Return TRUE if ADDR is the address of an RNAT slot.
+ */
+static __inline__ unsigned long
+ia64_rse_is_rnat_slot (unsigned long *addr)
+{
+	return ia64_rse_slot_num(addr) == 0x3f;
+}
+
+/*
+ * Returns the address of the RNAT slot that covers the slot at
+ * address SLOT_ADDR.
+ */
+static __inline__ unsigned long *
+ia64_rse_rnat_addr (unsigned long *slot_addr)
+{
+	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
+}
+
+/*
+ * Calculate the number of registers in the dirty partition starting at BSPSTORE and
+ * ending at BSP.  This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
+ * ar.rnat.
+ */
+static __inline__ unsigned long
+ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
+{
+	unsigned long slots = (bsp - bspstore);
+
+	return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
+}
+
+/*
+ * The inverse of the above: given bspstore and the number of
+ * registers, calculate ar.bsp.
+ */
+static __inline__ unsigned long *
+ia64_rse_skip_regs (unsigned long *addr, long num_regs)
+{
+	long delta = ia64_rse_slot_num(addr) + num_regs;
+
+	if (num_regs < 0)
+		delta -= 0x3e;
+	return addr + num_regs + delta/0x3f;
+}
+
+#endif /* _ASM_IA64_RSE_H */
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
new file mode 100644
index 000000000000..6ece5061dc19
--- /dev/null
+++ b/include/asm-ia64/rwsem.h
@@ -0,0 +1,188 @@
+/*
+ * asm-ia64/rwsem.h: R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case
+ * of an uncontended lock. Readers increment by 1 and see a positive value
+ * when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed int		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialization
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+	int result = ia64_fetchadd4_acq((unsigned int *)&sem->count, 1);
+
+	if (result < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old + RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_acq(&sem->count, old, new) != old);
+
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+	int result = ia64_fetchadd4_rel((unsigned int *)&sem->count, -1);
+
+	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+	int tmp;
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+	int tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+			      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_WAITING_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (old < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem)	atomic_add(delta, (atomic_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem)	atomic_add_return(delta, (atomic_t *)(&(sem)->count))
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
new file mode 100644
index 000000000000..ea1ed377de4c
--- /dev/null
+++ b/include/asm-ia64/sal.h
@@ -0,0 +1,840 @@
+#ifndef _ASM_IA64_SAL_H
+#define _ASM_IA64_SAL_H
+
+/*
+ * System Abstraction Layer definitions.
+ *
+ * This is based on version 2.5 of the manual "IA-64 System
+ * Abstraction Layer".
+ *
+ * Copyright (C) 2001 Intel
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
+ * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
+ *		    revision of the SAL spec.
+ * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
+ *                  revision of the SAL spec.
+ * 99/09/29 davidm	Updated for SAL 2.6.
+ * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6)
+ *                      (plus examples of platform error info structures from smariset @ Intel)
+ */
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT		0
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT	1
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT	2
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT	 	3
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK	  (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT	  (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bcd.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+
+#include <asm/pal.h>
+#include <asm/system.h>
+#include <asm/fpu.h>
+
+extern spinlock_t sal_lock;
+
+/* SAL spec _requires_ eight args for each call. */
+#define __SAL_CALL(result,a0,a1,a2,a3,a4,a5,a6,a7)	\
+	result = (*ia64_sal)(a0,a1,a2,a3,a4,a5,a6,a7)
+
+# define SAL_CALL(result,args...) do {				\
+	unsigned long __ia64_sc_flags;				\
+	struct ia64_fpreg __ia64_sc_fr[6];			\
+	ia64_save_scratch_fpregs(__ia64_sc_fr);			\
+	spin_lock_irqsave(&sal_lock, __ia64_sc_flags);		\
+	__SAL_CALL(result, args);				\
+	spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags);	\
+	ia64_load_scratch_fpregs(__ia64_sc_fr);			\
+} while (0)
+
+# define SAL_CALL_NOLOCK(result,args...) do {		\
+	unsigned long __ia64_scn_flags;			\
+	struct ia64_fpreg __ia64_scn_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scn_fr);	\
+	local_irq_save(__ia64_scn_flags);		\
+	__SAL_CALL(result, args);			\
+	local_irq_restore(__ia64_scn_flags);		\
+	ia64_load_scratch_fpregs(__ia64_scn_fr);	\
+} while (0)
+
+# define SAL_CALL_REENTRANT(result,args...) do {	\
+	struct ia64_fpreg __ia64_scs_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scs_fr);	\
+	preempt_disable();				\
+	__SAL_CALL(result, args);			\
+	preempt_enable();				\
+	ia64_load_scratch_fpregs(__ia64_scs_fr);	\
+} while (0)
+
+#define SAL_SET_VECTORS			0x01000000
+#define SAL_GET_STATE_INFO		0x01000001
+#define SAL_GET_STATE_INFO_SIZE		0x01000002
+#define SAL_CLEAR_STATE_INFO		0x01000003
+#define SAL_MC_RENDEZ			0x01000004
+#define SAL_MC_SET_PARAMS		0x01000005
+#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006
+
+#define SAL_CACHE_FLUSH			0x01000008
+#define SAL_CACHE_INIT			0x01000009
+#define SAL_PCI_CONFIG_READ		0x01000010
+#define SAL_PCI_CONFIG_WRITE		0x01000011
+#define SAL_FREQ_BASE			0x01000012
+
+#define SAL_UPDATE_PAL			0x01000020
+
+struct ia64_sal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
+
+enum {
+	SAL_FREQ_BASE_PLATFORM = 0,
+	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
+	SAL_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+/*
+ * The SAL system table is followed by a variable number of variable
+ * length descriptors.  The structure of these descriptors follows
+ * below.
+ * The defininition follows SAL specs from July 2000
+ */
+struct ia64_sal_systab {
+	u8 signature[4];	/* should be "SST_" */
+	u32 size;		/* size of this table in bytes */
+	u8 sal_rev_minor;
+	u8 sal_rev_major;
+	u16 entry_count;	/* # of entries in variable portion */
+	u8 checksum;
+	u8 reserved1[7];
+	u8 sal_a_rev_minor;
+	u8 sal_a_rev_major;
+	u8 sal_b_rev_minor;
+	u8 sal_b_rev_major;
+	/* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
+	u8 oem_id[32];
+	u8 product_id[32];	/* ASCII product id  */
+	u8 reserved2[8];
+};
+
+enum sal_systab_entry_type {
+	SAL_DESC_ENTRY_POINT = 0,
+	SAL_DESC_MEMORY = 1,
+	SAL_DESC_PLATFORM_FEATURE = 2,
+	SAL_DESC_TR = 3,
+	SAL_DESC_PTC = 4,
+	SAL_DESC_AP_WAKEUP = 5
+};
+
+/*
+ * Entry type:	Size:
+ *	0	48
+ *	1	32
+ *	2	16
+ *	3	32
+ *	4	16
+ *	5	16
+ */
+#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]
+
+typedef struct ia64_sal_desc_entry_point {
+	u8 type;
+	u8 reserved1[7];
+	u64 pal_proc;
+	u64 sal_proc;
+	u64 gp;
+	u8 reserved2[16];
+}ia64_sal_desc_entry_point_t;
+
+typedef struct ia64_sal_desc_memory {
+	u8 type;
+	u8 used_by_sal;	/* needs to be mapped for SAL? */
+	u8 mem_attr;		/* current memory attribute setting */
+	u8 access_rights;	/* access rights set up by SAL */
+	u8 mem_attr_mask;	/* mask of supported memory attributes */
+	u8 reserved1;
+	u8 mem_type;		/* memory type */
+	u8 mem_usage;		/* memory usage */
+	u64 addr;		/* physical address of memory */
+	u32 length;	/* length (multiple of 4KB pages) */
+	u32 reserved2;
+	u8 oem_reserved[8];
+} ia64_sal_desc_memory_t;
+
+typedef struct ia64_sal_desc_platform_feature {
+	u8 type;
+	u8 feature_mask;
+	u8 reserved1[14];
+} ia64_sal_desc_platform_feature_t;
+
+typedef struct ia64_sal_desc_tr {
+	u8 type;
+	u8 tr_type;		/* 0 == instruction, 1 == data */
+	u8 regnum;		/* translation register number */
+	u8 reserved1[5];
+	u64 addr;		/* virtual address of area covered */
+	u64 page_size;		/* encoded page size */
+	u8 reserved2[8];
+} ia64_sal_desc_tr_t;
+
+typedef struct ia64_sal_desc_ptc {
+	u8 type;
+	u8 reserved1[3];
+	u32 num_domains;	/* # of coherence domains */
+	u64 domain_info;	/* physical address of domain info table */
+} ia64_sal_desc_ptc_t;
+
+typedef struct ia64_sal_ptc_domain_info {
+	u64 proc_count;		/* number of processors in domain */
+	u64 proc_list;		/* physical address of LID array */
+} ia64_sal_ptc_domain_info_t;
+
+typedef struct ia64_sal_ptc_domain_proc_entry {
+	u64 id  : 8;		/* id of processor */
+	u64 eid : 8;		/* eid of processor */
+} ia64_sal_ptc_domain_proc_entry_t;
+
+
+#define IA64_SAL_AP_EXTERNAL_INT 0
+
+typedef struct ia64_sal_desc_ap_wakeup {
+	u8 type;
+	u8 mechanism;		/* 0 == external interrupt */
+	u8 reserved1[6];
+	u64 vector;		/* interrupt vector in range 0x10-0xff */
+} ia64_sal_desc_ap_wakeup_t ;
+
+extern ia64_sal_handler ia64_sal;
+extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
+
+extern unsigned short sal_revision;	/* supported SAL spec revision */
+extern unsigned short sal_version;	/* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+
+extern const char *ia64_sal_strerror (long status);
+extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
+
+/* SAL information type encodings */
+enum {
+	SAL_INFO_TYPE_MCA  = 0,		/* Machine check abort information */
+        SAL_INFO_TYPE_INIT = 1,		/* Init information */
+        SAL_INFO_TYPE_CMC  = 2,		/* Corrected machine check information */
+        SAL_INFO_TYPE_CPE  = 3		/* Corrected platform error information */
+};
+
+/* Encodings for machine check parameter types */
+enum {
+	SAL_MC_PARAM_RENDEZ_INT    = 1,	/* Rendezvous interrupt */
+	SAL_MC_PARAM_RENDEZ_WAKEUP = 2,	/* Wakeup */
+	SAL_MC_PARAM_CPE_INT	   = 3	/* Corrected Platform Error Int */
+};
+
+/* Encodings for rendezvous mechanisms */
+enum {
+	SAL_MC_PARAM_MECHANISM_INT = 1,	/* Use interrupt */
+	SAL_MC_PARAM_MECHANISM_MEM = 2	/* Use memory synchronization variable*/
+};
+
+/* Encodings for vectors which can be registered by the OS with SAL */
+enum {
+	SAL_VECTOR_OS_MCA	  = 0,
+	SAL_VECTOR_OS_INIT	  = 1,
+	SAL_VECTOR_OS_BOOT_RENDEZ = 2
+};
+
+/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
+#define	SAL_MC_PARAM_RZ_ALWAYS		0x1
+#define	SAL_MC_PARAM_BINIT_ESCALATE	0x10
+
+/*
+ * Definition of the SAL Error Log from the SAL spec
+ */
+
+/* SAL Error Record Section GUID Definitions */
+#define SAL_PROC_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+
+#define MAX_CACHE_ERRORS	6
+#define MAX_TLB_ERRORS		6
+#define MAX_BUS_ERRORS		1
+
+/* Definition of version  according to SAL spec for logging purposes */
+typedef struct sal_log_revision {
+	u8 minor;		/* BCD (0..99) */
+	u8 major;		/* BCD (0..99) */
+} sal_log_revision_t;
+
+/* Definition of timestamp according to SAL spec for logging purposes */
+typedef struct sal_log_timestamp {
+	u8 slh_second;		/* Second (0..59) */
+	u8 slh_minute;		/* Minute (0..59) */
+	u8 slh_hour;		/* Hour (0..23) */
+	u8 slh_reserved;
+	u8 slh_day;		/* Day (1..31) */
+	u8 slh_month;		/* Month (1..12) */
+	u8 slh_year;		/* Year (00..99) */
+	u8 slh_century;		/* Century (19, 20, 21, ...) */
+} sal_log_timestamp_t;
+
+/* Definition of log record  header structures */
+typedef struct sal_log_record_header {
+	u64 id;				/* Unique monotonically increasing ID */
+	sal_log_revision_t revision;	/* Major and Minor revision of header */
+	u16 severity;			/* Error Severity */
+	u32 len;			/* Length of this error log in bytes */
+	sal_log_timestamp_t timestamp;	/* Timestamp */
+	efi_guid_t platform_guid;	/* Unique OEM Platform ID */
+} sal_log_record_header_t;
+
+#define sal_log_severity_recoverable	0
+#define sal_log_severity_fatal		1
+#define sal_log_severity_corrected	2
+
+/* Definition of log section header structures */
+typedef struct sal_log_sec_header {
+    efi_guid_t guid;			/* Unique Section ID */
+    sal_log_revision_t revision;	/* Major and Minor revision of Section */
+    u16 reserved;
+    u32 len;				/* Section length */
+} sal_log_section_hdr_t;
+
+typedef struct sal_log_mod_error_info {
+	struct {
+		u64 check_info              : 1,
+		    requestor_identifier    : 1,
+		    responder_identifier    : 1,
+		    target_identifier       : 1,
+		    precise_ip              : 1,
+		    reserved                : 59;
+	} valid;
+	u64 check_info;
+	u64 requestor_identifier;
+	u64 responder_identifier;
+	u64 target_identifier;
+	u64 precise_ip;
+} sal_log_mod_error_info_t;
+
+typedef struct sal_processor_static_info {
+	struct {
+		u64 minstate        : 1,
+		    br              : 1,
+		    cr              : 1,
+		    ar              : 1,
+		    rr              : 1,
+		    fr              : 1,
+		    reserved        : 58;
+	} valid;
+	pal_min_state_area_t min_state_area;
+	u64 br[8];
+	u64 cr[128];
+	u64 ar[128];
+	u64 rr[8];
+	struct ia64_fpreg __attribute__ ((packed)) fr[128];
+} sal_processor_static_info_t;
+
+struct sal_cpuid_info {
+	u64 regs[5];
+	u64 reserved;
+};
+
+typedef struct sal_log_processor_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 proc_error_map      : 1,
+		    proc_state_param    : 1,
+		    proc_cr_lid         : 1,
+		    psi_static_struct   : 1,
+		    num_cache_check     : 4,
+		    num_tlb_check       : 4,
+		    num_bus_check       : 4,
+		    num_reg_file_check  : 4,
+		    num_ms_check        : 4,
+		    cpuid_info          : 1,
+		    reserved1           : 39;
+	} valid;
+	u64 proc_error_map;
+	u64 proc_state_parameter;
+	u64 proc_cr_lid;
+	/*
+	 * The rest of this structure consists of variable-length arrays, which can't be
+	 * expressed in C.
+	 */
+	sal_log_mod_error_info_t info[0];
+	/*
+	 * This is what the rest looked like if C supported variable-length arrays:
+	 *
+	 * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
+	 * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
+	 * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
+	 * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
+	 * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
+	 * struct sal_cpuid_info cpuid_info;
+	 * sal_processor_static_info_t processor_static_info;
+	 */
+} sal_log_processor_info_t;
+
+/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
+#define SAL_LPI_PSI_INFO(l)									\
+({	sal_log_processor_info_t *_l = (l);							\
+	((sal_processor_static_info_t *)							\
+	 ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check		\
+				+ _l->valid.num_bus_check + _l->valid.num_reg_file_check	\
+				+ _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t)	\
+			       + sizeof(struct sal_cpuid_info))));				\
+})
+
+/* platform error log structures */
+
+typedef struct sal_log_mem_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 error_status    : 1,
+		    physical_addr   : 1,
+		    addr_mask       : 1,
+		    node            : 1,
+		    card            : 1,
+		    module          : 1,
+		    bank            : 1,
+		    device          : 1,
+		    row             : 1,
+		    column          : 1,
+		    bit_position    : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_id          : 1,
+		    oem_data        : 1,
+		    reserved        : 47;
+	} valid;
+	u64 error_status;
+	u64 physical_addr;
+	u64 addr_mask;
+	u16 node;
+	u16 card;
+	u16 module;
+	u16 bank;
+	u16 device;
+	u16 row;
+	u16 column;
+	u16 bit_position;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_id[16];
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_mem_dev_err_info_t;
+
+typedef struct sal_log_sel_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 record_id       : 1,
+		    record_type     : 1,
+		    generator_id    : 1,
+		    evm_rev         : 1,
+		    sensor_type     : 1,
+		    sensor_num      : 1,
+		    event_dir       : 1,
+		    event_data1     : 1,
+		    event_data2     : 1,
+		    event_data3     : 1,
+		    reserved        : 54;
+	} valid;
+	u16 record_id;
+	u8 record_type;
+	u8 timestamp[4];
+	u16 generator_id;
+	u8 evm_rev;
+	u8 sensor_type;
+	u8 sensor_num;
+	u8 event_dir;
+	u8 event_data1;
+	u8 event_data2;
+	u8 event_data3;
+} sal_log_sel_dev_err_info_t;
+
+typedef struct sal_log_pci_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    err_type        : 1,
+		    bus_id          : 1,
+		    bus_address     : 1,
+		    bus_data        : 1,
+		    bus_cmd         : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    oem_data        : 1,
+		    reserved        : 54;
+	} valid;
+	u64 err_status;
+	u16 err_type;
+	u16 bus_id;
+	u32 reserved;
+	u64 bus_address;
+	u64 bus_data;
+	u64 bus_cmd;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_bus_err_info_t;
+
+typedef struct sal_log_smbios_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 event_type      : 1,
+		    length          : 1,
+		    time_stamp      : 1,
+		    data            : 1,
+		    reserved1       : 60;
+	} valid;
+	u8 event_type;
+	u8 length;
+	u8 time_stamp[6];
+	u8 data[1];			/* data of variable length, length == slsmb_length */
+} sal_log_smbios_dev_err_info_t;
+
+typedef struct sal_log_pci_comp_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    comp_info       : 1,
+		    num_mem_regs    : 1,
+		    num_io_regs     : 1,
+		    reg_data_pairs  : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	struct {
+		u16 vendor_id;
+		u16 device_id;
+		u8 class_code[3];
+		u8 func_num;
+		u8 dev_num;
+		u8 bus_num;
+		u8 seg_num;
+		u8 reserved[5];
+	} comp_info;
+	u32 num_mem_regs;
+	u32 num_io_regs;
+	u64 reg_data_pairs[1];
+	/*
+	 * array of address/data register pairs is num_mem_regs + num_io_regs elements
+	 * long.  Each array element consists of a u64 address followed by a u64 data
+	 * value.  The oem_data array immediately follows the reg_data_pairs array
+	 */
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_comp_err_info_t;
+
+typedef struct sal_log_plat_specific_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    guid            : 1,
+		    oem_data        : 1,
+		    reserved        : 61;
+	} valid;
+	u64 err_status;
+	efi_guid_t guid;
+	u8 oem_data[1];			/* platform specific variable length data */
+} sal_log_plat_specific_err_info_t;
+
+typedef struct sal_log_host_ctlr_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_host_ctlr_err_info_t;
+
+typedef struct sal_log_plat_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_plat_bus_err_info_t;
+
+/* Overall platform error section structure */
+typedef union sal_log_platform_err_info {
+	sal_log_mem_dev_err_info_t mem_dev_err;
+	sal_log_sel_dev_err_info_t sel_dev_err;
+	sal_log_pci_bus_err_info_t pci_bus_err;
+	sal_log_smbios_dev_err_info_t smbios_dev_err;
+	sal_log_pci_comp_err_info_t pci_comp_err;
+	sal_log_plat_specific_err_info_t plat_specific_err;
+	sal_log_host_ctlr_err_info_t host_ctlr_err;
+	sal_log_plat_bus_err_info_t plat_bus_err;
+} sal_log_platform_err_info_t;
+
+/* SAL log over-all, multi-section error record structure (processor+platform) */
+typedef struct err_rec {
+	sal_log_record_header_t sal_elog_header;
+	sal_log_processor_info_t proc_err;
+	sal_log_platform_err_info_t plat_err;
+	u8 oem_data_pad[1024];
+} ia64_err_rec_t;
+
+/*
+ * Now define a couple of inline functions for improved type checking
+ * and convenience.
+ */
+static inline long
+ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
+		    unsigned long *drift_info)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+	*ticks_per_second = isrv.v0;
+	*drift_info = isrv.v1;
+	return isrv.status;
+}
+
+/* Flush all the processor and platform level instruction and/or data caches */
+static inline s64
+ia64_sal_cache_flush (u64 cache_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Initialize all the processor and platform level instruction and data caches */
+static inline s64
+ia64_sal_cache_init (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Clear the processor and platform information logged by SAL with respect to the machine
+ * state at the time of MCA's, INITs, CMCs, or CPEs.
+ */
+static inline s64
+ia64_sal_clear_state_info (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Get the processor and platform information logged by SAL with respect to the machine
+ * state at the time of the MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
+	              sal_info, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+
+	return isrv.v0;
+}
+
+/*
+ * Get the maximum size of the information logged by SAL with respect to the machine state
+ * at the time of MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info_size (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/*
+ * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
+ * the monarch processor.  Must not lock, because it will not return on any cpu until the
+ * monarch processor sends a wake up.
+ */
+static inline s64
+ia64_sal_mc_rendez (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
+ * the machine check rendezvous sequence as well as the mechanism to wake up the
+ * non-monarch processor at the end of machine check processing.
+ * Returns the complete ia64_sal_retval because some calls return more than just a status
+ * value.
+ */
+static inline struct ia64_sal_retval
+ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
+		 timeout, rz_always, 0, 0);
+	return isrv;
+}
+
+/* Read from PCI configuration space */
+static inline s64
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
+	if (value)
+		*value = isrv.v0;
+	return isrv.status;
+}
+
+/* Write to PCI configuration space */
+static inline s64
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
+	         type, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register physical addresses of locations needed by SAL when SAL procedures are invoked
+ * in virtual mode.
+ */
+static inline s64
+ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
+	         0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register software dependent code locations within SAL. These locations are handlers or
+ * entry points where SAL will pass control for the specified event. These event handlers
+ * are for the bott rendezvous, MCAs and INIT scenarios.
+ */
+static inline s64
+ia64_sal_set_vectors (u64 vector_type,
+		      u64 handler_addr1, u64 gp1, u64 handler_len1,
+		      u64 handler_addr2, u64 gp2, u64 handler_len2)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
+			handler_addr1, gp1, handler_len1,
+			handler_addr2, gp2, handler_len2);
+
+	return isrv.status;
+}
+
+/* Update the contents of PAL block in the non-volatile storage device */
+static inline s64
+ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
+		     u64 *error_code, u64 *scratch_buf_size_needed)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
+	         0, 0, 0, 0);
+	if (error_code)
+		*error_code = isrv.v0;
+	if (scratch_buf_size_needed)
+		*scratch_buf_size_needed = isrv.v1;
+	return isrv.status;
+}
+
+extern unsigned long sal_platform_features;
+
+extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
+
+struct sal_ret_values {
+	long r8; long r9; long r10; long r11;
+};
+
+#define IA64_SAL_OEMFUNC_MIN		0x02000000
+#define IA64_SAL_OEMFUNC_MAX		0x03ffffff
+
+extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
+			    u64, u64, u64);
+extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
+				   u64, u64, u64, u64, u64);
+extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
+				      u64, u64, u64, u64, u64);
+
+extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SAL_H */
diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
new file mode 100644
index 000000000000..834a189ef189
--- /dev/null
+++ b/include/asm-ia64/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_SCATTERLIST_H
+#define _ASM_IA64_SCATTERLIST_H
+
+/*
+ * Modified 1998-1999, 2001-2002, 2004
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+	unsigned int length;	/* buffer length */
+
+	dma_addr_t dma_address;
+	unsigned int dma_length;
+};
+
+/*
+ * It used to be that ISA_DMA_THRESHOLD had something to do with the
+ * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
+ * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
+ * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
+ * address of a page is that is allocated with GFP_DMA.  On IA-64,
+ * that's 4GB - 1.
+ */
+#define ISA_DMA_THRESHOLD	0xffffffff
+
+#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
new file mode 100644
index 000000000000..8e3dbde1b429
--- /dev/null
+++ b/include/asm-ia64/sections.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SECTIONS_H
+#define _ASM_IA64_SECTIONS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm-generic/sections.h>
+
+extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
+extern char __start_gate_section[];
+extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
+extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
+extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
+extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
+extern char __start_unwind[], __end_unwind[];
+
+#endif /* _ASM_IA64_SECTIONS_H */
+
diff --git a/include/asm-ia64/segment.h b/include/asm-ia64/segment.h
new file mode 100644
index 000000000000..b89e2b3d648f
--- /dev/null
+++ b/include/asm-ia64/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_SEGMENT_H
+#define _ASM_IA64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
new file mode 100644
index 000000000000..3a2f0f3f78f3
--- /dev/null
+++ b/include/asm-ia64/semaphore.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_IA64_SEMAPHORE_H
+#define _ASM_IA64_SEMAPHORE_H
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ * Copyright (C) 1998-2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name)	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)					\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void
+sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void
+init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void
+init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down (struct semaphore * sem);
+extern int  __down_interruptible (struct semaphore * sem);
+extern int  __down_trylock (struct semaphore * sem);
+extern void __up (struct semaphore * sem);
+
+/*
+ * Atomically decrement the semaphore's count.  If it goes negative,
+ * block the calling thread in the TASK_UNINTERRUPTIBLE state.
+ */
+static inline void
+down (struct semaphore *sem)
+{
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+}
+
+/*
+ * Atomically decrement the semaphore's count.  If it goes negative,
+ * block the calling thread in the TASK_INTERRUPTIBLE state.
+ */
+static inline int
+down_interruptible (struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int
+down_trylock (struct semaphore *sem)
+{
+	int ret = 0;
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_trylock(sem);
+	return ret;
+}
+
+static inline void
+up (struct semaphore * sem)
+{
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif /* _ASM_IA64_SEMAPHORE_H */
diff --git a/include/asm-ia64/sembuf.h b/include/asm-ia64/sembuf.h
new file mode 100644
index 000000000000..1340fbc04d3e
--- /dev/null
+++ b/include/asm-ia64/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SEMBUF_H
+#define _ASM_IA64_SEMBUF_H
+
+/*
+ * The semid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h
new file mode 100644
index 000000000000..0c7a2f3dcf13
--- /dev/null
+++ b/include/asm-ia64/serial.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-ia64/serial.h
+ *
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/include/asm-ia64/setup.h b/include/asm-ia64/setup.h
new file mode 100644
index 000000000000..ea29b57affcb
--- /dev/null
+++ b/include/asm-ia64/setup.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_SETUP_H
+#define __IA64_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif
diff --git a/include/asm-ia64/shmbuf.h b/include/asm-ia64/shmbuf.h
new file mode 100644
index 000000000000..585002a77acd
--- /dev/null
+++ b/include/asm-ia64/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SHMBUF_H
+#define _ASM_IA64_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/include/asm-ia64/shmparam.h b/include/asm-ia64/shmparam.h
new file mode 100644
index 000000000000..d07508dc54ae
--- /dev/null
+++ b/include/asm-ia64/shmparam.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_SHMPARAM_H
+#define _ASM_IA64_SHMPARAM_H
+
+/*
+ * SHMLBA controls minimum alignment at which shared memory segments
+ * get attached.  The IA-64 architecture says that there may be a
+ * performance degradation when there are virtual aliases within 1MB.
+ * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
+ */
+#define	SHMLBA	(1024*1024)
+
+#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/include/asm-ia64/sigcontext.h b/include/asm-ia64/sigcontext.h
new file mode 100644
index 000000000000..57ff777bcc40
--- /dev/null
+++ b/include/asm-ia64/sigcontext.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_SIGCONTEXT_H
+#define _ASM_IA64_SIGCONTEXT_H
+
+/*
+ * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/fpu.h>
+
+#define IA64_SC_FLAG_ONSTACK_BIT		0	/* is handler running on signal stack? */
+#define IA64_SC_FLAG_IN_SYSCALL_BIT		1	/* did signal interrupt a syscall? */
+#define IA64_SC_FLAG_FPH_VALID_BIT		2	/* is state in f[32]-f[127] valid? */
+
+#define IA64_SC_FLAG_ONSTACK		(1 << IA64_SC_FLAG_ONSTACK_BIT)
+#define IA64_SC_FLAG_IN_SYSCALL		(1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
+#define IA64_SC_FLAG_FPH_VALID		(1 << IA64_SC_FLAG_FPH_VALID_BIT)
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Note on handling of register backing store: sc_ar_bsp contains the address that would
+ * be found in ar.bsp after executing a "cover" instruction the context in which the
+ * signal was raised.  If signal delivery required switching to an alternate signal stack
+ * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
+ * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
+ * original one.  In this case, sc_rbs_base contains the base address of the new register
+ * backing store.  The number of registers in the dirty partition can be calculated as:
+ *
+ *   ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
+ *
+ */
+
+struct sigcontext {
+	unsigned long		sc_flags;	/* see manifest constants above */
+	unsigned long		sc_nat;		/* bit i == 1 iff scratch reg gr[i] is a NaT */
+	stack_t			sc_stack;	/* previously active stack */
+
+	unsigned long		sc_ip;		/* instruction pointer */
+	unsigned long		sc_cfm;		/* current frame marker */
+	unsigned long		sc_um;		/* user mask bits */
+	unsigned long		sc_ar_rsc;	/* register stack configuration register */
+	unsigned long		sc_ar_bsp;	/* backing store pointer */
+	unsigned long		sc_ar_rnat;	/* RSE NaT collection register */
+	unsigned long		sc_ar_ccv;	/* compare and exchange compare value register */
+	unsigned long		sc_ar_unat;	/* ar.unat of interrupted context */
+	unsigned long		sc_ar_fpsr;	/* floating-point status register */
+	unsigned long		sc_ar_pfs;	/* previous function state */
+	unsigned long		sc_ar_lc;	/* loop count register */
+	unsigned long		sc_pr;		/* predicate registers */
+	unsigned long		sc_br[8];	/* branch registers */
+	/* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
+	unsigned long		sc_gr[32];	/* general registers (static partition) */
+	struct ia64_fpreg	sc_fr[128];	/* floating-point registers */
+
+	unsigned long		sc_rbs_base;	/* NULL or new base of sighandler's rbs */
+	unsigned long		sc_loadrs;	/* see description above */
+
+	unsigned long		sc_ar25;	/* cmp8xchg16 uses this */
+	unsigned long		sc_ar26;	/* rsvd for scratch use */
+	unsigned long		sc_rsvd[12];	/* reserved for future use */
+	/*
+	 * The mask must come last so we can increase _NSIG_WORDS
+	 * without breaking binary compatibility.
+	 */
+	sigset_t		sc_mask;	/* signal mask to restore after handler returns */
+};
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/include/asm-ia64/siginfo.h b/include/asm-ia64/siginfo.h
new file mode 100644
index 000000000000..d55f139cbcdc
--- /dev/null
+++ b/include/asm-ia64/siginfo.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
+
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define SI_PAD_SIZE	((SI_MAX_SIZE/sizeof(int)) - 4)
+
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+	int __pad0;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* must overlay ._rt._sigval! */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			uid_t _uid;		/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr;	/* faulting insn/memory ref. */
+			int _imm;		/* immediate value for "break" */
+			unsigned int _flags;	/* see below */
+			unsigned long _isr;	/* isr */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
+#define si_flags	_sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr		_sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT	0
+#define __ISR_VALID	(1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
+#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
+#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL		11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
+#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
+#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
+#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
+#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE		13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+static inline void
+copy_siginfo (siginfo_t *to, siginfo_t *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(siginfo_t));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h
new file mode 100644
index 000000000000..660a759744dd
--- /dev/null
+++ b/include/asm-ia64/signal.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
+
+/*
+ * Modified 1998-2001, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
+ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models.  The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers.  The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+  /*
+   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
+   * incorrect value and fix libc only.
+   */
+# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#define SA_PERCPU_IRQ		0x02000000
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+/* Type of a signal handler.  */
+typedef void __user (*__sighandler_t)(int);
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#  include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+void set_sigdelayed(pid_t pid, int signo, int code, void __user *addr);
+
+#endif /* __KERNEL__ */
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
new file mode 100644
index 000000000000..c4a227acfeb0
--- /dev/null
+++ b/include/asm-ia64/smp.h
@@ -0,0 +1,134 @@
+/*
+ * SMP Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+#ifndef _ASM_IA64_SMP_H
+#define _ASM_IA64_SMP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+static inline unsigned int
+ia64_get_lid (void)
+{
+	union {
+		struct {
+			unsigned long reserved : 16;
+			unsigned long eid : 8;
+			unsigned long id : 8;
+			unsigned long ignored : 32;
+		} f;
+		unsigned long bits;
+	} lid;
+
+	lid.bits = ia64_getreg(_IA64_REG_CR_LID);
+	return lid.f.id << 8 | lid.f.eid;
+}
+
+#ifdef CONFIG_SMP
+
+#define XTP_OFFSET		0x1e0008
+
+#define SMP_IRQ_REDIRECTION	(1 << 0)
+#define SMP_IPI_REDIRECTION	(1 << 1)
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+extern struct smp_boot_data {
+	int cpu_count;
+	int cpu_phys_id[NR_CPUS];
+} smp_boot_data __initdata;
+
+extern char no_int_routing __devinitdata;
+
+extern cpumask_t cpu_online_map;
+extern void __iomem *ipi_base_addr;
+extern unsigned char smp_int_redirect;
+
+extern volatile int ia64_cpu_to_sapicid[];
+#define cpu_physical_id(i)	ia64_cpu_to_sapicid[i]
+
+extern unsigned long ap_wakeup_vector;
+
+/*
+ * Function to map hard smp processor id to logical id.  Slow, so don't use this in
+ * performance-critical code.
+ */
+static inline int
+cpu_logical_id (int cpuid)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; ++i)
+		if (cpu_physical_id(i) == cpuid)
+			break;
+	return i;
+}
+
+/*
+ * XTP control functions:
+ *	min_xtp   : route all interrupts to this CPU
+ *	normal_xtp: nominal XTP value
+ *	max_xtp   : never deliver interrupts to this CPU.
+ */
+
+static inline void
+min_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
+}
+
+static inline void
+normal_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
+}
+
+static inline void
+max_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
+}
+
+#define hard_smp_processor_id()		ia64_get_lid()
+
+/* Upping and downing of CPUs */
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+extern void __init smp_build_cpu_map(void);
+
+extern void __init init_smp_config (void);
+extern void smp_do_timer (struct pt_regs *regs);
+
+extern int smp_call_function_single (int cpuid, void (*func) (void *info), void *info,
+				     int retry, int wait);
+extern void smp_send_reschedule (int cpu);
+extern void lock_ipi_calllock(void);
+extern void unlock_ipi_calllock(void);
+
+#else
+
+#define cpu_logical_id(i)		0
+#define cpu_physical_id(i)		ia64_get_lid()
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_IA64_SMP_H */
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
new file mode 100644
index 000000000000..c916bd22767a
--- /dev/null
+++ b/include/asm-ia64/sn/addrs.h
@@ -0,0 +1,238 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ *  Memory/SHUB Address Format:
+ *  +-+---------+--+--------------+
+ *  |0|  NASID  |AS| NodeOffset   |
+ *  +-+---------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ *   AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ *     00: Local Resources and MMR space
+ *           Top bit of NodeOffset
+ *               0: Local resources space
+ *                  node id:
+ *                        0: IA64/NT compatibility space
+ *                        2: Local MMR Space
+ *                        4: Local memory, regardless of local node id
+ *               1: Global MMR space
+ *     01: GET space.
+ *     10: AMO space.
+ *     11: Cacheable memory space.
+ *
+ *   NodeOffset: byte offset
+ *
+ *
+ *  TIO address format:
+ *  +-+----------+--+--------------+
+ *  |0|  NASID   |AS| Nodeoffset   |
+ *  +-+----------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 1) TIO
+ *   AS: 2-bit Chiplet Identifier
+ *     00: TIO LB (Indicates TIO MMR access.)
+ *     01: TIO ICE (indicates coretalk space access.)
+ * 
+ *   NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK		(sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT		(sn_hub_info->nasid_shift)
+#define AS_SHIFT		(sn_hub_info->as_shift)
+#define AS_BITMASK		0x3UL
+
+#define NASID_MASK              ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK			((u64)AS_BITMASK << AS_SHIFT)
+#define REGION_BITS		0xe000000000000000UL
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL		1UL
+#define AS_AMO_VAL		2UL
+#define AS_CAC_VAL		3UL
+#define AS_GET_SPACE		(AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE		(AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE		(AS_CAC_VAL << AS_SHIFT)
+
+
+/*
+ * Base addresses for various address ranges.
+ */
+#define CACHED			0xe000000000000000UL
+#define UNCACHED                0xc000000000000000UL
+#define UNCACHED_PHYS           0x8000000000000000UL
+
+
+/* 
+ * Virtual Mode Local & Global MMR space.  
+ */
+#define SH1_LOCAL_MMR_OFFSET	0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET	0x0200000000UL
+#define LOCAL_MMR_OFFSET	(is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE		(UNCACHED | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE	(UNCACHED_PHYS | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET	0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET	0x0300000000UL
+#define GLOBAL_MMR_OFFSET	(is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE	(UNCACHED | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE	(UNCACHED_PHYS | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK		(~(REGION_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n)		((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a)	(NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x)		((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE     (1UL << AS_SHIFT)
+#define NASID_GET(x)		(int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a)	(LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a)	(GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a)	(CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x)	((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP		0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE		(CACHED   | AS_CAC_SPACE)
+#define AMO_BASE		(UNCACHED | AS_AMO_SPACE)
+#define GET_BASE		(CACHED   | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x)		(TO_PHYS_MASK & (x))
+#define TO_CAC(x)		(CAC_BASE     | TO_PHYS(x))
+#define TO_AMO(x)		(AMO_BASE     | TO_PHYS(x))
+#define TO_GET(x)		(GET_BASE     | TO_PHYS(x))
+
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ *	II - squeeze out the AS bits
+ *	TIO- requires a chiplet id in bits 38-39.  For DMA to memory,
+ *           the chiplet id is zero.  If we implement TIO-TIO dma, we might need
+ *           to insert a chiplet id into this macro.  However, it is our belief
+ *           right now that this chiplet id will be ICE, which is also zero.
+ */
+#define PHYS_TO_TIODMA(x)	( (((u64)(x) & NASID_MASK) << 2) | NODE_OFFSET(x))
+#define PHYS_TO_DMA(x)          ( (((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS			29	/* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS		30	/* big window size: 1G */
+#define NODE_SWIN_BASE(n, w)		((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+		: RAW_NODE_SWIN_BASE(n, w))
+#define NODE_IO_BASE(n)			(GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define BWIN_SIZE			(1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n)		(NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w)		(NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w)	(NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK		0x7
+#define BWIN_WINDOWNUM(x)		(((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK	0x7
+#define TIO_BWIN_WINDOWNUM(x)		(((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS			24
+#define	SWIN_WIDGET_MASK		0xF
+
+#define TIO_SWIN_SIZE_BITS		28
+#define TIO_SWIN_SIZE			(1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK		0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETNUM(x)		(((x)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ *   WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+#define REMOTE_HUB_ADDR(n,x)						\
+	((n & 1) ?							\
+	/* TIO: */							\
+	((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))			\
+	: /* SHUB: */							\
+	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+	: ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
+
+
+
+#define HUB_L(x)			(*((volatile typeof(*x) *)x))
+#define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a)		HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d)		HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+
+#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
new file mode 100644
index 000000000000..7c349f07916a
--- /dev/null
+++ b/include/asm-ia64/sn/arch.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995-1997,1999,2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_IA64_SN_ARCH_H
+#define _ASM_IA64_SN_ARCH_H
+
+#include <asm/types.h>
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn_cpuid.h>
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced. They are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct sn_hub_info_s {
+	u8 shub2;
+	u8 nasid_shift;
+	u8 as_shift;
+	u8 shub_1_1_found;
+	u16 nasid_bitmask;
+};
+DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+#define sn_hub_info 	(&__get_cpu_var(__sn_hub_info))
+#define is_shub2()	(sn_hub_info->shub2)
+#define is_shub1()	(sn_hub_info->shub2 == 0)
+
+/*
+ * Use this macro to test if shub 1.1 wars should be enabled
+ */
+#define enable_shub_wars_1_1()	(sn_hub_info->shub_1_1_found)
+
+
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ * This is not necessarily the same as MAX_NASIDS.
+ */
+#define MAX_COMPACT_NODES	2048
+#define CPUS_PER_NODE		4
+
+extern void sn_flush_all_caches(long addr, long bytes);
+
+#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
new file mode 100644
index 000000000000..0ec27f99c181
--- /dev/null
+++ b/include/asm-ia64/sn/bte.h
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/types.h>
+
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+#  define BTE_PRINTK(x) printk x	/* Terse */
+#  ifdef BTE_DEBUG_VERBOSE
+#    define BTE_PRINTKV(x) printk x	/* Verbose */
+#  else
+#    define BTE_PRINTKV(x)
+#  endif /* BTE_DEBUG_VERBOSE */
+#else
+#  define BTE_PRINTK(x)
+#  define BTE_PRINTKV(x)
+#endif	/* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE 2
+
+
+/* Define hardware modes */
+#define BTE_NOTIFY (IBCT_NOTIFY)
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE (0x4000)
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
+#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte)						\
+			HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x)						\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_SRC/8), (_x))
+#define BTE_DEST_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_DEST/8), (_x))
+#define BTE_CTRL_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_CTRL/8), (_x))
+#define BTE_NOTIF_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_NOTIFY/8), (_x))
+
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET	1
+
+typedef enum {
+	BTE_SUCCESS,		/* 0 is success */
+	BTEFAIL_DIR,		/* Directory error due to IIO access*/
+	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
+	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
+	BTEFAIL_ACCESS,		/* access error (protection violation) */
+	BTEFAIL_PWERR,		/* Partial Write Error */
+	BTEFAIL_PRERR,		/* Partial Read Error */
+	BTEFAIL_TOUT,		/* CRB Time out */
+	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
+	BTEFAIL_NOTAVAIL,	/* BTE not available */
+} bte_result_t;
+
+
+/*
+ * Structure defining a bte.  An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+	volatile u64 notify ____cacheline_aligned;
+	u64 *bte_base_addr ____cacheline_aligned;
+	spinlock_t spinlock;
+	cnodeid_t bte_cnode;	/* cnode                            */
+	int bte_error_count;	/* Number of errors encountered     */
+	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
+	int cleanup_active;	/* Interface is locked for cleanup  */
+	volatile bte_result_t bh_error;	/* error while processing   */
+	volatile u64 *most_rcnt_na;
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead.  Since bte_copy is inlined, this saves a call
+ * stack.  NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete.  In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
+	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
+	  (dest & L1_CACHE_MASK)) ?                                     \
+	 bte_unaligned_copy(src, dest, len, mode) :              	\
+	 bte_copy(src, dest, len, mode, NULL))
+
+
+#endif	/* _ASM_IA64_SN_BTE_H */
diff --git a/include/asm-ia64/sn/clksupport.h b/include/asm-ia64/sn/clksupport.h
new file mode 100644
index 000000000000..d340c365a824
--- /dev/null
+++ b/include/asm-ia64/sn/clksupport.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * This file contains definitions for accessing a platform supported high resolution
+ * clock. The clock is monitonically increasing and can be accessed from any node
+ * in the system. The clock is synchronized across nodes - all nodes see the
+ * same value.
+ * 
+ *	RTC_COUNTER_ADDR - contains the address of the counter 
+ *
+ */
+
+#ifndef _ASM_IA64_SN_CLKSUPPORT_H
+#define _ASM_IA64_SN_CLKSUPPORT_H
+
+extern unsigned long sn_rtc_cycles_per_second;
+
+#define RTC_COUNTER_ADDR	((long *)LOCAL_MMR_ADDR(SH_RTC))
+
+#define rtc_time()		(*RTC_COUNTER_ADDR)
+
+#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/include/asm-ia64/sn/fetchop.h b/include/asm-ia64/sn/fetchop.h
new file mode 100644
index 000000000000..5f4ad8f4b5d2
--- /dev/null
+++ b/include/asm-ia64/sn/fetchop.h
@@ -0,0 +1,85 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_FETCHOP_H
+#define _ASM_IA64_SN_FETCHOP_H
+
+#include <linux/config.h>
+
+#define FETCHOP_BASENAME	"sgi_fetchop"
+#define FETCHOP_FULLNAME	"/dev/sgi_fetchop"
+
+
+
+#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
+
+#define FETCHOP_LOAD		0
+#define FETCHOP_INCREMENT	8
+#define FETCHOP_DECREMENT	16
+#define FETCHOP_CLEAR		24
+
+#define FETCHOP_STORE		0
+#define FETCHOP_AND		24
+#define FETCHOP_OR		32
+
+#define FETCHOP_CLEAR_CACHE	56
+
+#define FETCHOP_LOAD_OP(addr, op) ( \
+         *(volatile long *)((char*) (addr) + (op)))
+
+#define FETCHOP_STORE_OP(addr, op, x) ( \
+         *(volatile long *)((char*) (addr) + (op)) = (long) (x))
+
+#ifdef __KERNEL__
+
+/*
+ * Convert a region 6 (kaddr) address to the address of the fetchop variable
+ */
+#define FETCHOP_KADDR_TO_MSPEC_ADDR(kaddr)	TO_MSPEC(kaddr)
+
+
+/*
+ * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * variable is 64 bytes long.  The first 8 bytes are used.  The
+ * remaining 56 bytes are unaddressable due to the operation taking
+ * that portion of the address.
+ * 
+ * NOTE: The AMO_t _MUST_ be placed in either the first or second half
+ * of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional AMO_t entries.  This is because there are two
+ * addresses which reference the same physical cache line.  One will
+ * be a cached entry with the memory type bits all set.  This address
+ * may be loaded into processor cache.  The AMO_t will be referenced
+ * uncached via the memory special memory type.  If any portion of the
+ * cached cache-line is modified, when that line is flushed, it will
+ * overwrite the uncached value in physical memory and lead to
+ * inconsistency.
+ */
+typedef struct {
+        u64 variable;
+        u64 unused[7];
+} AMO_t;
+
+
+/*
+ * The following APIs are externalized to the kernel to allocate/free pages of
+ * fetchop variables.
+ *	fetchop_kalloc_page	- Allocate/initialize 1 fetchop page on the
+ *				  specified cnode. 
+ *	fetchop_kfree_page	- Free a previously allocated fetchop page
+ */
+
+unsigned long fetchop_kalloc_page(int nid);
+void fetchop_kfree_page(unsigned long maddr);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SN_FETCHOP_H */
+
diff --git a/include/asm-ia64/sn/geo.h b/include/asm-ia64/sn/geo.h
new file mode 100644
index 000000000000..f566343d25f8
--- /dev/null
+++ b/include/asm-ia64/sn/geo.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_GEO_H
+#define _ASM_IA64_SN_GEO_H
+
+/* The geoid_t implementation below is based loosely on the pcfg_t
+   implementation in sys/SN/promcfg.h. */
+
+/* Type declaractions */
+
+/* Size of a geoid_t structure (must be before decl. of geoid_u) */
+#define GEOID_SIZE	8	/* Would 16 be better?  The size can
+				   be different on different platforms. */
+
+#define MAX_SLABS	0xe	/* slabs per module */
+
+typedef unsigned char	geo_type_t;
+
+/* Fields common to all substructures */
+typedef struct geo_any_s {
+    moduleid_t	module;		/* The module (box) this h/w lives in */
+    geo_type_t	type;		/* What type of h/w is named by this geoid_t */
+    slabid_t	slab;		/* The logical assembly within the module */
+} geo_any_t;
+
+/* Additional fields for particular types of hardware */
+typedef struct geo_node_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_node_t;
+
+typedef struct geo_rtr_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_rtr_t;
+
+typedef struct geo_iocntl_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_iocntl_t;
+
+typedef struct geo_pcicard_s {
+    geo_iocntl_t	any;
+    char		bus;	/* Bus/widget number */
+    char		slot;	/* PCI slot number */
+} geo_pcicard_t;
+
+/* Subcomponents of a node */
+typedef struct geo_cpu_s {
+    geo_node_t	node;
+    char	slice;		/* Which CPU on the node */
+} geo_cpu_t;
+
+typedef struct geo_mem_s {
+    geo_node_t	node;
+    char	membus;		/* The memory bus on the node */
+    char	memslot;	/* The memory slot on the bus */
+} geo_mem_t;
+
+
+typedef union geoid_u {
+    geo_any_t	any;
+    geo_node_t	node;
+    geo_iocntl_t	iocntl;
+    geo_pcicard_t	pcicard;
+    geo_rtr_t	rtr;
+    geo_cpu_t	cpu;
+    geo_mem_t	mem;
+    char	padsize[GEOID_SIZE];
+} geoid_t;
+
+
+/* Preprocessor macros */
+
+#define GEO_MAX_LEN	48	/* max. formatted length, plus some pad:
+				   module/001c07/slab/5/node/memory/2/slot/4 */
+
+/* Values for geo_type_t */
+#define GEO_TYPE_INVALID	0
+#define GEO_TYPE_MODULE		1
+#define GEO_TYPE_NODE		2
+#define GEO_TYPE_RTR		3
+#define GEO_TYPE_IOCNTL		4
+#define GEO_TYPE_IOCARD		5
+#define GEO_TYPE_CPU		6
+#define GEO_TYPE_MEM		7
+#define GEO_TYPE_MAX		(GEO_TYPE_MEM+1)
+
+/* Parameter for hwcfg_format_geoid_compt() */
+#define GEO_COMPT_MODULE	1
+#define GEO_COMPT_SLAB		2
+#define GEO_COMPT_IOBUS		3
+#define GEO_COMPT_IOSLOT	4
+#define GEO_COMPT_CPU		5
+#define GEO_COMPT_MEMBUS	6
+#define GEO_COMPT_MEMSLOT	7
+
+#define GEO_INVALID_STR		"<invalid>"
+
+#define INVALID_NASID           ((nasid_t)-1)
+#define INVALID_CNODEID         ((cnodeid_t)-1)
+#define INVALID_PNODEID         ((pnodeid_t)-1)
+#define INVALID_SLAB            (slabid_t)-1
+#define INVALID_MODULE          ((moduleid_t)-1)
+#define INVALID_PARTID          ((partid_t)-1)
+
+static inline slabid_t geo_slab(geoid_t g)
+{
+	return (g.any.type == GEO_TYPE_INVALID) ?
+		INVALID_SLAB : g.any.slab;
+}
+
+static inline moduleid_t geo_module(geoid_t g)
+{
+	return (g.any.type == GEO_TYPE_INVALID) ?
+		INVALID_MODULE : g.any.module;
+}
+
+extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
+
+#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
new file mode 100644
index 000000000000..e51471fb0867
--- /dev/null
+++ b/include/asm-ia64/sn/intr.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_INTR_H
+#define _ASM_IA64_SN_INTR_H
+
+#define SGI_UART_VECTOR		(0xe9)
+#define SGI_PCIBR_ERROR		(0x33)
+
+/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
+#define SGI_XPC_ACTIVATE                (0x30)
+#define SGI_II_ERROR                    (0x31)
+#define SGI_XBOW_ERROR                  (0x32)
+#define SGI_PCIBR_ERROR                 (0x33)
+#define SGI_ACPI_SCI_INT                (0x34)
+#define SGI_TIOCA_ERROR                 (0x35)
+#define SGI_TIO_ERROR                   (0x36)
+#define SGI_TIOCX_ERROR                 (0x37)
+#define SGI_MMTIMER_VECTOR              (0x38)
+#define SGI_XPC_NOTIFY                  (0xe7)
+
+#define IA64_SN2_FIRST_DEVICE_VECTOR    (0x3c)
+#define IA64_SN2_LAST_DEVICE_VECTOR     (0xe6)
+
+#define SN2_IRQ_RESERVED        (0x1)
+#define SN2_IRQ_CONNECTED       (0x2)
+#define SN2_IRQ_SHARED          (0x4)
+
+// The SN PROM irq struct
+struct sn_irq_info {
+	struct sn_irq_info *irq_next;	/* sharing irq list	     */
+	short		irq_nasid;	/* Nasid IRQ is assigned to  */
+	int		irq_slice;	/* slice IRQ is assigned to  */
+	int		irq_cpuid;	/* kernel logical cpuid	     */
+	int		irq_irq;	/* the IRQ number */
+	int		irq_int_bit;	/* Bridge interrupt pin */
+	uint64_t	irq_xtalkaddr;	/* xtalkaddr IRQ is sent to  */
+	int		irq_bridge_type;/* pciio asic type (pciio.h) */
+	void	       *irq_bridge;	/* bridge generating irq     */
+	void	       *irq_pciioinfo;	/* associated pciio_info_t   */
+	int		irq_last_intr;	/* For Shub lb lost intr WAR */
+	int		irq_cookie;	/* unique cookie 	     */
+	int		irq_flags;	/* flags */
+	int		irq_share_cnt;	/* num devices sharing IRQ   */
+};
+
+extern void sn_send_IPI_phys(int, long, int, int);
+
+#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
+
+#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h
new file mode 100644
index 000000000000..42209733f6b1
--- /dev/null
+++ b/include/asm-ia64/sn/io.h
@@ -0,0 +1,265 @@
+/* 
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+
+extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
+extern void __sn_mmiowb(void); /* Forward definition */
+
+extern int numionodes;
+
+#define __sn_mf_a()   ia64_mfa()
+
+extern void sn_dma_flush(unsigned long);
+
+#define __sn_inb ___sn_inb
+#define __sn_inw ___sn_inw
+#define __sn_inl ___sn_inl
+#define __sn_outb ___sn_outb
+#define __sn_outw ___sn_outw
+#define __sn_outl ___sn_outl
+#define __sn_readb ___sn_readb
+#define __sn_readw ___sn_readw
+#define __sn_readl ___sn_readl
+#define __sn_readq ___sn_readq
+#define __sn_readb_relaxed ___sn_readb_relaxed
+#define __sn_readw_relaxed ___sn_readw_relaxed
+#define __sn_readl_relaxed ___sn_readl_relaxed
+#define __sn_readq_relaxed ___sn_readq_relaxed
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to inX/outX set macros.  SN Platform
+ * inX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned int
+___sn_inb (unsigned long port)
+{
+	volatile unsigned char *addr;
+	unsigned char ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inw (unsigned long port)
+{
+	volatile unsigned short *addr;
+	unsigned short ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inl (unsigned long port)
+{
+	volatile unsigned int *addr;
+	unsigned int ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline void
+___sn_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+/*
+ * The following routines are SN Platform specific, called when 
+ * a reference is made to readX/writeX set macros.  SN Platform 
+ * readX set of macros ensures that Posted DMA writes on the 
+ * Bridge is flushed.
+ * 
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned char
+___sn_readb (const volatile void __iomem *addr)
+{
+	unsigned char val;
+
+	val = *(volatile unsigned char __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned short
+___sn_readw (const volatile void __iomem *addr)
+{
+	unsigned short val;
+
+	val = *(volatile unsigned short __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned int
+___sn_readl (const volatile void __iomem *addr)
+{
+	unsigned int val;
+
+	val = *(volatile unsigned int __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned long
+___sn_readq (const volatile void __iomem *addr)
+{
+	unsigned long val;
+
+	val = *(volatile unsigned long __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+/*
+ * For generic and SN2 kernels, we have a set of fast access
+ * PIO macros.	These macros are provided on SN Platform
+ * because the normal inX and readX macros perform an
+ * additional task of flushing Post DMA request on the Bridge.
+ *
+ * These routines should be self explainatory.
+ */
+
+static inline unsigned int
+sn_inb_fast (unsigned long port)
+{
+	volatile unsigned char *addr = (unsigned char *)port;
+	unsigned char ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inw_fast (unsigned long port)
+{
+	volatile unsigned short *addr = (unsigned short *)port;
+	unsigned short ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inl_fast (unsigned long port)
+{
+	volatile unsigned int *addr = (unsigned int *)port;
+	unsigned int ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned char
+___sn_readb_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___sn_readw_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___sn_readl_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___sn_readq_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+struct pci_dev;
+
+static inline int
+sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
+{
+
+	if (vchan > 1) {
+		return -1;
+	}
+
+	if (!(*addr >> 32))	/* Using a mask here would be cleaner */
+		return 0;	/* but this generates better code */
+
+	if (vchan == 1) {
+		/* Set Bit 57 */
+		*addr |= (1UL << 57);
+	} else {
+		/* Clear Bit 57 */
+		*addr &= ~(1UL << 57);
+	}
+
+	return 0;
+}
+
+#endif	/* _ASM_SN_IO_H */
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h
new file mode 100644
index 000000000000..9f920c70a62a
--- /dev/null
+++ b/include/asm-ia64/sn/klconfig.h
@@ -0,0 +1,272 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_KLCONFIG_H
+#define _ASM_IA64_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+typedef s32 klconf_off_t;
+
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	char		pad[20];
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	char		pad0[88];
+} kl_config_hdr_t;
+
+
+#define NODE_OFFSET_TO_LBOARD(nasid,off)        (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to 
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and 
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 
+ * First board info on the remote node. The remote node list is 
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ * 
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has 
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error 
+ * information specific to the COMPONENT is present in the respective 
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the 
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is 
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes 
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ * 
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+
+/*
+ * BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0   
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE	
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI 
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_IOBRICK	0x70		/* IP35 iobrick */
+#define KLCLASS_MAX	8		/* Bump this if a new CLASS is added */
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+
+/*
+ * board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE(_x)      ((_x) & KLTYPE_MASK)
+
+#define KLTYPE_SNIA	(KLCLASS_CPU | 0x1)
+#define KLTYPE_TIO	(KLCLASS_CPU | 0x2)
+
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
+
+#define KLTYPE_IOBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_NBRICK		(KLCLASS_IOBRICK | 0x4)
+#define KLTYPE_PXBRICK		(KLCLASS_IOBRICK | 0x6)
+#define KLTYPE_IXBRICK		(KLCLASS_IOBRICK | 0x7)
+#define KLTYPE_CGBRICK		(KLCLASS_IOBRICK | 0x8)
+#define KLTYPE_OPUSBRICK	(KLCLASS_IOBRICK | 0x9)
+#define KLTYPE_SABRICK          (KLCLASS_IOBRICK | 0xa)
+#define KLTYPE_IABRICK		(KLCLASS_IOBRICK | 0xb)
+#define KLTYPE_PABRICK          (KLCLASS_IOBRICK | 0xc)
+#define KLTYPE_GABRICK		(KLCLASS_IOBRICK | 0xd)
+
+
+/* 
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next_any;     /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+ 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	geoid_t		brd_geoid;	  /* geo id */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	char            pad0[4];
+	unsigned char	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		pad1[24];	  /* future expansion */
+	char		brd_name[32];
+	nasid_t		brd_next_same_host; /* host of next brd w/same nasid */
+	klconf_off_t	brd_next_same;    /* Next BOARD with same nasid */
+} lboard_t;
+
+#define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
+#define NODE_OFFSET_TO_KLINFO(n,off)    ((klinfo_t*) TO_NODE_CAC(n,off))
+#define KLCF_NEXT(_brd)         \
+        ((_brd)->brd_next_same ?     \
+         (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
+#define KLCF_NEXT_ANY(_brd)         \
+        ((_brd)->brd_next_any ?     \
+         (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
+#define KLCF_COMP(_brd, _ndx)   \
+                ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
+			(NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
+
+
+/*
+ * Generic info structure. This stores common info about a 
+ * component.
+ */
+ 
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+        unsigned short  partid;		   /* widget part number */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	void		*data;
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+
+static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
+{
+        /* Search all boards stored on this node. */
+
+        while (start) {
+                if (start->brd_type == brd_type)
+                        return start;
+                start = KLCF_NEXT_ANY(start);
+        }
+        /* Didn't find it. */
+        return (lboard_t *) NULL;
+}
+
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *root_lboard[];
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+
+#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
new file mode 100644
index 000000000000..d5dbd55e44b5
--- /dev/null
+++ b/include/asm-ia64/sn/l1.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_L1_H
+#define _ASM_IA64_SN_L1_H
+
+/* brick type response codes */
+#define L1_BRICKTYPE_PX         0x23            /* # */
+#define L1_BRICKTYPE_PE         0x25            /* % */
+#define L1_BRICKTYPE_N_p0       0x26            /* & */
+#define L1_BRICKTYPE_IP45       0x34            /* 4 */
+#define L1_BRICKTYPE_IP41       0x35            /* 5 */
+#define L1_BRICKTYPE_TWISTER    0x36            /* 6 */ /* IP53 & ROUTER */
+#define L1_BRICKTYPE_IX         0x3d            /* = */
+#define L1_BRICKTYPE_IP34       0x61            /* a */
+#define L1_BRICKTYPE_GA		0x62            /* b */
+#define L1_BRICKTYPE_C          0x63            /* c */
+#define L1_BRICKTYPE_OPUS_TIO	0x66		/* f */
+#define L1_BRICKTYPE_I          0x69            /* i */
+#define L1_BRICKTYPE_N          0x6e            /* n */
+#define L1_BRICKTYPE_OPUS       0x6f		/* o */
+#define L1_BRICKTYPE_P          0x70            /* p */
+#define L1_BRICKTYPE_R          0x72            /* r */
+#define L1_BRICKTYPE_CHI_CG     0x76            /* v */
+#define L1_BRICKTYPE_X          0x78            /* x */
+#define L1_BRICKTYPE_X2         0x79            /* y */
+#define L1_BRICKTYPE_SA		0x5e            /* ^ */ /* TIO bringup brick */
+#define L1_BRICKTYPE_PA		0x6a            /* j */
+#define L1_BRICKTYPE_IA		0x6b            /* k */
+
+#endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/leds.h b/include/asm-ia64/sn/leds.h
new file mode 100644
index 000000000000..66cf8c4d92c9
--- /dev/null
+++ b/include/asm-ia64/sn/leds.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_LEDS_H
+#define _ASM_IA64_SN_LEDS_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/shub_mmr.h>
+
+#define LED0		(LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
+#define LED_CPU_SHIFT	16
+
+#define LED_CPU_HEARTBEAT	0x01
+#define LED_CPU_ACTIVITY	0x02
+#define LED_ALWAYS_SET		0x00
+
+/*
+ * Basic macros for flashing the LEDS on an SGI SN.
+ */
+
+static __inline__ void
+set_led_bits(u8 value, u8 mask)
+{
+	pda->led_state = (pda->led_state & ~mask) | (value & mask);
+	*pda->led_address = (short) pda->led_state;
+}
+
+#endif /* _ASM_IA64_SN_LEDS_H */
+
diff --git a/include/asm-ia64/sn/module.h b/include/asm-ia64/sn/module.h
new file mode 100644
index 000000000000..734e980ece2f
--- /dev/null
+++ b/include/asm-ia64/sn/module.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_MODULE_H
+#define _ASM_IA64_SN_MODULE_H
+
+/* parameter for format_module_id() */
+#define MODULE_FORMAT_BRIEF	1
+#define MODULE_FORMAT_LONG	2
+#define MODULE_FORMAT_LCD	3
+
+/*
+ *	Module id format
+ *
+ *	31-16	Rack ID (encoded class, group, number - 16-bit unsigned int)
+ *	 15-8	Brick type (8-bit ascii character)
+ *	  7-0	Bay (brick position in rack (0-63) - 8-bit unsigned int)
+ *
+ */
+
+/*
+ * Macros for getting the brick type
+ */
+#define MODULE_BTYPE_MASK	0xff00
+#define MODULE_BTYPE_SHFT	8
+#define MODULE_GET_BTYPE(_m)	(((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
+#define MODULE_BT_TO_CHAR(_b)	((char)(_b))
+#define MODULE_GET_BTCHAR(_m)	(MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
+
+/*
+ * Macros for getting the rack ID.
+ */
+#define MODULE_RACK_MASK	0xffff0000
+#define MODULE_RACK_SHFT	16
+#define MODULE_GET_RACK(_m)	(((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
+
+/*
+ * Macros for getting the brick position
+ */
+#define MODULE_BPOS_MASK	0x00ff
+#define MODULE_BPOS_SHFT	0
+#define MODULE_GET_BPOS(_m)	(((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class (0==CPU/mixed, 1==I/O), group, number
+ *
+ * Rack number is stored just as it is displayed on the screen:
+ * a 3-decimal-digit number.
+ */
+#define RACK_CLASS_DVDR         100
+#define RACK_GROUP_DVDR         10
+#define RACK_NUM_DVDR           1
+
+#define RACK_CREATE_RACKID(_c, _g, _n)  ((_c) * RACK_CLASS_DVDR +       \
+        (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
+
+#define RACK_GET_CLASS(_r)              ((_r) / RACK_CLASS_DVDR)
+#define RACK_GET_GROUP(_r)              (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
+#define RACK_GET_NUM(_r)                (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR - RACK_GET_GROUP(_r) *      \
+            RACK_GROUP_DVDR) / RACK_NUM_DVDR)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class      1 bit, 0==CPU/mixed, 1==I/O
+ *   group      2 bits for CPU/mixed, 3 bits for I/O
+ *   number     3 bits for CPU/mixed, 2 bits for I/O (1 based)
+ */
+#define RACK_GROUP_BITS(_r)     (RACK_GET_CLASS(_r) ? 3 : 2)
+#define RACK_NUM_BITS(_r)       (RACK_GET_CLASS(_r) ? 2 : 3)
+
+#define RACK_CLASS_MASK(_r)     0x20
+#define RACK_CLASS_SHFT(_r)     5
+#define RACK_ADD_CLASS(_r, _c)  \
+        ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
+
+#define RACK_GROUP_SHFT(_r)     RACK_NUM_BITS(_r)
+#define RACK_GROUP_MASK(_r)     \
+        ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
+#define RACK_ADD_GROUP(_r, _g)  \
+        ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
+
+#define RACK_NUM_SHFT(_r)       0
+#define RACK_NUM_MASK(_r)       \
+        ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
+#define RACK_ADD_NUM(_r, _n)    \
+        ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
+
+
+/*
+ * Brick type definitions
+ */
+#define MAX_BRICK_TYPES         256 /* brick type is stored as uchar */
+
+extern char brick_types[];
+
+#define MODULE_CBRICK           0
+#define MODULE_RBRICK           1
+#define MODULE_IBRICK           2
+#define MODULE_KBRICK           3
+#define MODULE_XBRICK           4
+#define MODULE_DBRICK           5
+#define MODULE_PBRICK           6
+#define MODULE_NBRICK           7
+#define MODULE_PEBRICK          8
+#define MODULE_PXBRICK          9
+#define MODULE_IXBRICK          10
+#define MODULE_CGBRICK		11
+#define MODULE_OPUSBRICK        12
+#define MODULE_SABRICK		13	/* TIO BringUp Brick */
+#define MODULE_IABRICK		14
+#define MODULE_PABRICK		15
+#define MODULE_GABRICK		16
+#define MODULE_OPUS_TIO		17	/* OPUS TIO Riser */
+
+extern char brick_types[];
+extern void format_module_id(char *, moduleid_t, int);
+
+#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h
new file mode 100644
index 000000000000..2fbde33656e6
--- /dev/null
+++ b/include/asm-ia64/sn/nodepda.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_NODEPDA_H
+#define _ASM_IA64_SN_NODEPDA_H
+
+
+#include <asm/semaphore.h>
+#include <asm/irq.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/bte.h>
+
+/*
+ * NUMA Node-Specific Data structures are defined in this file.
+ * In particular, this is the location of the node PDA.
+ * A pointer to the right node PDA is saved in each CPU PDA.
+ */
+
+/*
+ * Node-specific data structure.
+ *
+ * One of these structures is allocated on each node of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all per-node data structures. 
+ */
+struct phys_cpuid {
+	short			nasid;
+	char			subnode;
+	char			slice;
+};
+
+struct nodepda_s {
+	void 		*pdinfo;	/* Platform-dependent per-node info */
+	spinlock_t		bist_lock;
+
+	/*
+	 * The BTEs on this node are shared by the local cpus
+	 */
+	struct bteinfo_s	bte_if[BTES_PER_NODE];	/* Virtual Interface */
+	struct timer_list	bte_recovery_timer;
+	spinlock_t		bte_recovery_lock;
+
+	/* 
+	 * Array of pointers to the nodepdas for each node.
+	 */
+	struct nodepda_s	*pernode_pdaindr[MAX_COMPACT_NODES]; 
+
+	/*
+	 * Array of physical cpu identifiers. Indexed by cpuid.
+	 */
+	struct phys_cpuid	phys_cpuid[NR_CPUS];
+};
+
+typedef struct nodepda_s nodepda_t;
+
+/*
+ * Access Functions for node PDA.
+ * Since there is one nodepda for each node, we need a convenient mechanism
+ * to access these nodepdas without cluttering code with #ifdefs.
+ * The next set of definitions provides this.
+ * Routines are expected to use 
+ *
+ *	nodepda			-> to access node PDA for the node on which code is running
+ *	subnodepda		-> to access subnode PDA for the subnode on which code is running
+ *
+ *	NODEPDA(cnode)		-> to access node PDA for cnodeid 
+ *	SUBNODEPDA(cnode,sn)	-> to access subnode PDA for cnodeid/subnode
+ */
+
+#define	nodepda		pda->p_nodepda		/* Ptr to this node's PDA */
+#define	NODEPDA(cnode)		(nodepda->pernode_pdaindr[cnode])
+
+/*
+ * Check if given a compact node id the corresponding node has all the
+ * cpus disabled. 
+ */
+#define is_headless_node(cnode)		(nr_cpus_node(cnode) == 0)
+
+#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h
new file mode 100644
index 000000000000..e940d3647c80
--- /dev/null
+++ b/include/asm-ia64/sn/pda.h
@@ -0,0 +1,80 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PDA_H
+#define _ASM_IA64_SN_PDA_H
+
+#include <linux/cache.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/sn/bte.h>
+
+
+/*
+ * CPU-specific data structure.
+ *
+ * One of these structures is allocated for each cpu of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all SN per-cpu data structures. 
+ */
+
+typedef struct pda_s {
+
+	/* Having a pointer in the begining of PDA tends to increase
+	 * the chance of having this pointer in cache. (Yes something
+	 * else gets pushed out). Doing this reduces the number of memory
+	 * access to all nodepda variables to be one
+	 */
+	struct nodepda_s *p_nodepda;		/* Pointer to Per node PDA */
+	struct subnodepda_s *p_subnodepda;	/* Pointer to CPU  subnode PDA */
+
+	/*
+	 * Support for SN LEDs
+	 */
+	volatile short	*led_address;
+	u8		led_state;
+	u8		hb_state;	/* supports blinking heartbeat leds */
+	unsigned int	hb_count;
+
+	unsigned int	idle_flag;
+	
+	volatile unsigned long *bedrock_rev_id;
+	volatile unsigned long *pio_write_status_addr;
+	unsigned long pio_write_status_val;
+	volatile unsigned long *pio_shub_war_cam_addr;
+
+	unsigned long	sn_soft_irr[4];
+	unsigned long	sn_in_service_ivecs[4];
+	short		cnodeid_to_nasid_table[MAX_NUMNODES];
+	int		sn_lb_int_war_ticks;
+	int		sn_last_irq;
+	int		sn_first_irq;
+} pda_t;
+
+
+#define CACHE_ALIGN(x)	(((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
+
+/*
+ * PDA
+ * Per-cpu private data area for each cpu. The PDA is located immediately after
+ * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
+ * cpu but only a small amout of the page is actually used. We put the SNIA PDA
+ * in the same page as the cpu_data area. Note that there is a check in the setup
+ * code to verify that we don't overflow the page.
+ *
+ * Seems like we should should cache-line align the pda so that any changes in the
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
+ * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
+ */
+DECLARE_PER_CPU(struct pda_s, pda_percpu);
+
+#define pda		(&__ia64_per_cpu_var(pda_percpu))
+
+#define pdacpu(cpu)	(&per_cpu(pda_percpu, cpu))
+
+#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/include/asm-ia64/sn/rw_mmr.h b/include/asm-ia64/sn/rw_mmr.h
new file mode 100644
index 000000000000..f40fd1a5510d
--- /dev/null
+++ b/include/asm-ia64/sn/rw_mmr.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+#ifndef _ASM_IA64_SN_RW_MMR_H
+#define _ASM_IA64_SN_RW_MMR_H
+
+
+/*
+ * This file contains macros used to access MMR registers via
+ * uncached physical addresses.
+ * 	pio_phys_read_mmr  - read an MMR
+ * 	pio_phys_write_mmr - write an MMR
+ * 	pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ *		Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+extern inline long
+pio_phys_read_mmr(volatile long *mmr) 
+{
+	long val;
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt;;"
+             "srlz.i;;"
+             "ld8.acq %0=[%1];;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+             : "=r"(val)
+             : "r"(mmr)
+	     : "r2");
+        return val;
+}
+
+
+
+extern inline void
+pio_phys_write_mmr(volatile long *mmr, long val) 
+{
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt;;"
+             "srlz.i;;"
+             "st8.rel [%0]=%1;;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+	     :: "r"(mmr), "r"(val)
+             : "r2", "memory");
+}            
+
+extern inline void
+pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2) 
+{
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt | psr.ic;;"
+	     "cmp.ne p9,p0=%2,r0;"
+             "srlz.i;;"
+             "st8.rel [%0]=%1;"
+             "(p9) st8.rel [%2]=%3;;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+	     :: "r"(mmr1), "r"(val1), "r"(mmr2), "r"(val2)
+             : "p9", "r2", "memory");
+}            
+
+#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
new file mode 100644
index 000000000000..5c2fcf13d5ce
--- /dev/null
+++ b/include/asm-ia64/sn/shub_mmr.h
@@ -0,0 +1,441 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/*                        Register "SH_IPI_INT"                         */
+/*               SHub Inter-Processor Interrupt Registers               */
+/* ==================================================================== */
+#define SH1_IPI_INT                               0x0000000110000380
+#define SH2_IPI_INT                               0x0000000010000380
+
+/*   SH_IPI_INT_TYPE                                                    */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_IPI_INT_TYPE_SHFT                     0
+#define SH_IPI_INT_TYPE_MASK                     0x0000000000000007
+
+/*   SH_IPI_INT_AGT                                                     */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_IPI_INT_AGT_SHFT                      3
+#define SH_IPI_INT_AGT_MASK                      0x0000000000000008
+
+/*   SH_IPI_INT_PID                                                     */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_IPI_INT_PID_SHFT                      4
+#define SH_IPI_INT_PID_MASK                      0x00000000000ffff0
+
+/*   SH_IPI_INT_BASE                                                    */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_IPI_INT_BASE_SHFT                     21
+#define SH_IPI_INT_BASE_MASK                     0x0003ffffffe00000
+
+/*   SH_IPI_INT_IDX                                                     */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_IPI_INT_IDX_SHFT                      52
+#define SH_IPI_INT_IDX_MASK                      0x0ff0000000000000
+
+/*   SH_IPI_INT_SEND                                                    */
+/*   Description:  Send Interrupt Message to PI, This generates a puls  */
+#define SH_IPI_INT_SEND_SHFT                     63
+#define SH_IPI_INT_SEND_MASK                     0x8000000000000000
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED                        0x0000000110010000
+#define SH1_EVENT_OCCURRED_ALIAS                  0x0000000110010008
+#define SH2_EVENT_OCCURRED                        0x0000000010010000
+#define SH2_EVENT_OCCURRED_ALIAS                  0x0000000010010008
+
+/* ==================================================================== */
+/*                     Register "SH_PI_CAM_CONTROL"                     */
+/*                      CRB CAM MMR Access Control                      */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL                        0x0000000120050300
+
+/* ==================================================================== */
+/*                        Register "SH_SHUB_ID"                         */
+/*                            SHub ID Number                            */
+/* ==================================================================== */
+#define SH1_SHUB_ID                               0x0000000110060580
+#define SH1_SHUB_ID_REVISION_SHFT                 28
+#define SH1_SHUB_ID_REVISION_MASK                 0x00000000f0000000
+
+/* ==================================================================== */
+/*                          Register "SH_RTC"                           */
+/*                           Real-time Clock                            */
+/* ==================================================================== */
+#define SH1_RTC                                   0x00000001101c0000
+#define SH2_RTC					  0x00000002101c0000
+#define SH_RTC_MASK                               0x007fffffffffffff
+
+/* ==================================================================== */
+/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
+/*                      PIO Write Status for CPU 0 & 1                  */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0                    0x0000000120070200
+#define SH1_PIO_WRITE_STATUS_1                    0x0000000120070280
+#define SH2_PIO_WRITE_STATUS_0                    0x0000000020070200
+#define SH2_PIO_WRITE_STATUS_1                    0x0000000020070280
+#define SH2_PIO_WRITE_STATUS_2                    0x0000000020070300
+#define SH2_PIO_WRITE_STATUS_3                    0x0000000020070380
+
+/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
+/*   Description:  Deadlock response detected                           */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+
+/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
+/*   Description:  Count of currently pending PIO writes                */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+
+/* ==================================================================== */
+/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS              0x0000000120070208
+#define SH2_PIO_WRITE_STATUS_0_ALIAS              0x0000000020070208
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+/*   SH_EVENT_OCCURRED_UART_INT                                         */
+/*   Description:  Pending Junk Bus UART Interrupt                      */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT          20
+#define SH_EVENT_OCCURRED_UART_INT_MASK          0x0000000000100000
+
+/*   SH_EVENT_OCCURRED_IPI_INT                                          */
+/*   Description:  Pending IPI Interrupt                                */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT           28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK           0x0000000010000000
+
+/*   SH_EVENT_OCCURRED_II_INT0                                          */
+/*   Description:  Pending II 0 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT           29
+#define SH_EVENT_OCCURRED_II_INT0_MASK           0x0000000020000000
+
+/*   SH_EVENT_OCCURRED_II_INT1                                          */
+/*   Description:  Pending II 1 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT           30
+#define SH_EVENT_OCCURRED_II_INT1_MASK           0x0000000040000000
+
+/* ==================================================================== */
+/*                         LEDS                                         */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0			 0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1			 0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2			 0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3			 0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0			 0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1			 0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2			 0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3			 0xf0030000UL
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_0"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_0                                 0x00000001101a0000
+
+/*   SH1_PTC_0_A                                                        */
+/*   Description:  Type                                                 */
+#define SH1_PTC_0_A_SHFT                          0
+
+/*   SH1_PTC_0_PS                                                       */
+/*   Description:  Page Size                                            */
+#define SH1_PTC_0_PS_SHFT                         2
+
+/*   SH1_PTC_0_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH1_PTC_0_RID_SHFT                        8
+
+/*   SH1_PTC_0_START                                                    */
+/*   Description:  Start                                                */
+#define SH1_PTC_0_START_SHFT                      63
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_1"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_1                                 0x00000001101a0080
+
+/*   SH1_PTC_1_START                                                    */
+/*   Description:  PTC_1 Start                                          */
+#define SH1_PTC_1_START_SHFT                      63
+
+
+/* ==================================================================== */
+/*                         Register "SH2_PTC"                           */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH2_PTC                                   0x0000000170000000
+
+/*   SH2_PTC_A                                                          */
+/*   Description:  Type                                                 */
+#define SH2_PTC_A_SHFT                            0
+
+/*   SH2_PTC_PS                                                         */
+/*   Description:  Page Size                                            */
+#define SH2_PTC_PS_SHFT                           2
+
+/*   SH2_PTC_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_RID_SHFT                          4
+
+/*   SH2_PTC_START                                                      */
+/*   Description:  Start                                                */
+#define SH2_PTC_START_SHFT                        63
+
+/*   SH2_PTC_ADDR_RID                                                   */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_ADDR_SHFT                         4
+#define SH2_PTC_ADDR_MASK                         0x1ffffffffffff000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_CONFIG"                     */
+/*                SHub RTC 1 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG                      0x0000000110001480
+#define SH2_RTC1_INT_CONFIG                      0x0000000010001480
+#define SH_RTC1_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC1_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC1_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC1_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC1_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC1_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC1_INT_CONFIG_PID_SHFT              4
+#define SH_RTC1_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC1_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC1_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC1_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC1_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_ENABLE"                     */
+/*                SHub RTC 1 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE                      0x0000000110001500
+#define SH2_RTC1_INT_ENABLE                      0x0000000010001500
+#define SH_RTC1_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC1_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
+/*   Description:  Enable RTC 1 Interrupt                               */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT      0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK      0x0000000000000001
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_CONFIG"                     */
+/*                SHub RTC 2 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG                      0x0000000110001580
+#define SH2_RTC2_INT_CONFIG                      0x0000000010001580
+#define SH_RTC2_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC2_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC2_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC2_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC2_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC2_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC2_INT_CONFIG_PID_SHFT              4
+#define SH_RTC2_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC2_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC2_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC2_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC2_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_ENABLE"                     */
+/*                SHub RTC 2 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE                      0x0000000110001600
+#define SH2_RTC2_INT_ENABLE                      0x0000000010001600
+#define SH_RTC2_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC2_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
+/*   Description:  Enable RTC 2 Interrupt                               */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT      0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK      0x0000000000000001
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_CONFIG"                     */
+/*                SHub RTC 3 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG                      0x0000000110001680
+#define SH2_RTC3_INT_CONFIG                      0x0000000010001680
+#define SH_RTC3_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC3_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC3_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC3_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC3_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC3_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC3_INT_CONFIG_PID_SHFT              4
+#define SH_RTC3_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC3_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC3_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC3_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC3_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_ENABLE"                     */
+/*                SHub RTC 3 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE                      0x0000000110001700
+#define SH2_RTC3_INT_ENABLE                      0x0000000010001700
+#define SH_RTC3_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC3_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
+/*   Description:  Enable RTC 3 Interrupt                               */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT      0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK      0x0000000000000001
+
+/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
+/*   Description:  Pending RTC 1 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT          24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK          0x0000000001000000
+
+/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
+/*   Description:  Pending RTC 2 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT          25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK          0x0000000002000000
+
+/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
+/*   Description:  Pending RTC 3 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT          26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK          0x0000000004000000
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPB"                        */
+/*                  RTC Compare Value for Processor B                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB                             0x00000001101b0080
+#define SH2_INT_CMPB                             0x00000000101b0080
+#define SH_INT_CMPB_MASK                         0x007fffffffffffff
+#define SH_INT_CMPB_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT          0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK          0x007fffffffffffff
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPC"                        */
+/*                  RTC Compare Value for Processor C                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC                             0x00000001101b0100
+#define SH2_INT_CMPC                             0x00000000101b0100
+#define SH_INT_CMPC_MASK                         0x007fffffffffffff
+#define SH_INT_CMPC_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT          0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK          0x007fffffffffffff
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPD"                        */
+/*                  RTC Compare Value for Processor D                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD                             0x00000001101b0180
+#define SH2_INT_CMPD                             0x00000000101b0180
+#define SH_INT_CMPD_MASK                         0x007fffffffffffff
+#define SH_INT_CMPD_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT          0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK          0x007fffffffffffff
+
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
+/* on the type of the SHUB. Do not use these #defines in performance    */
+/* critical code  or loops - there is a small performance penalty.      */
+/* ==================================================================== */
+#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT		shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC			shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h
new file mode 100644
index 000000000000..fbd880e6bb96
--- /dev/null
+++ b/include/asm-ia64/sn/shubio.h
@@ -0,0 +1,3476 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUBIO_H
+#define _ASM_IA64_SN_SHUBIO_H
+
+#define HUB_WIDGET_ID_MAX 0xf
+#define IIO_NUM_ITTES   7
+#define HUB_NUM_BIG_WINDOW      (IIO_NUM_ITTES - 1)
+
+#define    IIO_WID                   0x00400000    /* Crosstalk Widget Identification */
+                                                   /* This register is also accessible from
+                                                    * Crosstalk at address 0x0.  */
+#define    IIO_WSTAT                 0x00400008    /* Crosstalk Widget Status */
+#define    IIO_WCR                   0x00400020    /* Crosstalk Widget Control Register */
+#define    IIO_ILAPR                 0x00400100    /* IO Local Access Protection Register */
+#define    IIO_ILAPO                 0x00400108    /* IO Local Access Protection Override */
+#define    IIO_IOWA                  0x00400110    /* IO Outbound Widget Access */
+#define    IIO_IIWA                  0x00400118    /* IO Inbound Widget Access */
+#define    IIO_IIDEM                 0x00400120    /* IO Inbound Device Error Mask */
+#define    IIO_ILCSR                 0x00400128    /* IO LLP Control and Status Register */
+#define    IIO_ILLR                  0x00400130    /* IO LLP Log Register    */
+#define    IIO_IIDSR                 0x00400138    /* IO Interrupt Destination */
+
+#define    IIO_IGFX0                 0x00400140    /* IO Graphics Node-Widget Map 0 */
+#define    IIO_IGFX1                 0x00400148    /* IO Graphics Node-Widget Map 1 */
+
+#define    IIO_ISCR0                 0x00400150    /* IO Scratch Register 0 */
+#define    IIO_ISCR1                 0x00400158    /* IO Scratch Register 1 */
+
+#define    IIO_ITTE1                 0x00400160    /* IO Translation Table Entry 1 */
+#define    IIO_ITTE2                 0x00400168    /* IO Translation Table Entry 2 */
+#define    IIO_ITTE3                 0x00400170    /* IO Translation Table Entry 3 */
+#define    IIO_ITTE4                 0x00400178    /* IO Translation Table Entry 4 */
+#define    IIO_ITTE5                 0x00400180    /* IO Translation Table Entry 5 */
+#define    IIO_ITTE6                 0x00400188    /* IO Translation Table Entry 6 */
+#define    IIO_ITTE7                 0x00400190    /* IO Translation Table Entry 7 */
+
+#define    IIO_IPRB0                 0x00400198    /* IO PRB Entry 0         */
+#define    IIO_IPRB8                 0x004001A0    /* IO PRB Entry 8         */
+#define    IIO_IPRB9                 0x004001A8    /* IO PRB Entry 9         */
+#define    IIO_IPRBA                 0x004001B0    /* IO PRB Entry A         */
+#define    IIO_IPRBB                 0x004001B8    /* IO PRB Entry B         */
+#define    IIO_IPRBC                 0x004001C0    /* IO PRB Entry C         */
+#define    IIO_IPRBD                 0x004001C8    /* IO PRB Entry D         */
+#define    IIO_IPRBE                 0x004001D0    /* IO PRB Entry E         */
+#define    IIO_IPRBF                 0x004001D8    /* IO PRB Entry F         */
+
+#define    IIO_IXCC                  0x004001E0    /* IO Crosstalk Credit Count Timeout */
+#define    IIO_IMEM                  0x004001E8    /* IO Miscellaneous Error Mask */
+#define    IIO_IXTT                  0x004001F0    /* IO Crosstalk Timeout Threshold */
+#define    IIO_IECLR                 0x004001F8    /* IO Error Clear Register */
+#define    IIO_IBCR                  0x00400200    /* IO BTE Control Register */
+
+#define    IIO_IXSM                  0x00400208    /* IO Crosstalk Spurious Message */
+#define    IIO_IXSS                  0x00400210    /* IO Crosstalk Spurious Sideband */
+
+#define    IIO_ILCT                  0x00400218    /* IO LLP Channel Test    */
+
+#define    IIO_IIEPH1                0x00400220    /* IO Incoming Error Packet Header, Part 1 */
+#define    IIO_IIEPH2                0x00400228    /* IO Incoming Error Packet Header, Part 2 */
+
+
+#define    IIO_ISLAPR                0x00400230    /* IO SXB Local Access Protection Regster */
+#define    IIO_ISLAPO                0x00400238    /* IO SXB Local Access Protection Override */
+
+#define    IIO_IWI                   0x00400240    /* IO Wrapper Interrupt Register */
+#define    IIO_IWEL                  0x00400248    /* IO Wrapper Error Log Register */
+#define    IIO_IWC                   0x00400250    /* IO Wrapper Control Register */
+#define    IIO_IWS                   0x00400258    /* IO Wrapper Status Register */
+#define    IIO_IWEIM                 0x00400260    /* IO Wrapper Error Interrupt Masking Register */
+
+#define    IIO_IPCA                  0x00400300    /* IO PRB Counter Adjust */
+
+#define    IIO_IPRTE0_A              0x00400308    /* IO PIO Read Address Table Entry 0, Part A */
+#define    IIO_IPRTE1_A              0x00400310    /* IO PIO Read Address Table Entry 1, Part A */
+#define    IIO_IPRTE2_A              0x00400318    /* IO PIO Read Address Table Entry 2, Part A */
+#define    IIO_IPRTE3_A               0x00400320    /* IO PIO Read Address Table Entry 3, Part A */
+#define    IIO_IPRTE4_A               0x00400328    /* IO PIO Read Address Table Entry 4, Part A */
+#define    IIO_IPRTE5_A               0x00400330    /* IO PIO Read Address Table Entry 5, Part A */
+#define    IIO_IPRTE6_A               0x00400338    /* IO PIO Read Address Table Entry 6, Part A */
+#define    IIO_IPRTE7_A               0x00400340    /* IO PIO Read Address Table Entry 7, Part A */
+
+#define    IIO_IPRTE0_B              0x00400348    /* IO PIO Read Address Table Entry 0, Part B */
+#define    IIO_IPRTE1_B              0x00400350    /* IO PIO Read Address Table Entry 1, Part B */
+#define    IIO_IPRTE2_B              0x00400358    /* IO PIO Read Address Table Entry 2, Part B */
+#define    IIO_IPRTE3_B               0x00400360    /* IO PIO Read Address Table Entry 3, Part B */
+#define    IIO_IPRTE4_B               0x00400368    /* IO PIO Read Address Table Entry 4, Part B */
+#define    IIO_IPRTE5_B               0x00400370    /* IO PIO Read Address Table Entry 5, Part B */
+#define    IIO_IPRTE6_B               0x00400378    /* IO PIO Read Address Table Entry 6, Part B */
+#define    IIO_IPRTE7_B               0x00400380    /* IO PIO Read Address Table Entry 7, Part B */
+
+#define    IIO_IPDR                  0x00400388    /* IO PIO Deallocation Register */
+#define    IIO_ICDR                  0x00400390    /* IO CRB Entry Deallocation Register */
+#define    IIO_IFDR                  0x00400398    /* IO IOQ FIFO Depth Register */
+#define    IIO_IIAP                  0x004003A0    /* IO IIQ Arbitration Parameters */
+#define    IIO_ICMR                  0x004003A8    /* IO CRB Management Register */
+#define    IIO_ICCR                  0x004003B0    /* IO CRB Control Register */
+#define    IIO_ICTO                  0x004003B8    /* IO CRB Timeout         */
+#define    IIO_ICTP                  0x004003C0    /* IO CRB Timeout Prescalar */
+
+#define    IIO_ICRB0_A               0x00400400    /* IO CRB Entry 0_A       */
+#define    IIO_ICRB0_B               0x00400408    /* IO CRB Entry 0_B       */
+#define    IIO_ICRB0_C               0x00400410    /* IO CRB Entry 0_C       */
+#define    IIO_ICRB0_D               0x00400418    /* IO CRB Entry 0_D       */
+#define    IIO_ICRB0_E               0x00400420    /* IO CRB Entry 0_E       */
+
+#define    IIO_ICRB1_A               0x00400430    /* IO CRB Entry 1_A       */
+#define    IIO_ICRB1_B               0x00400438    /* IO CRB Entry 1_B       */
+#define    IIO_ICRB1_C               0x00400440    /* IO CRB Entry 1_C       */
+#define    IIO_ICRB1_D               0x00400448    /* IO CRB Entry 1_D       */
+#define    IIO_ICRB1_E               0x00400450    /* IO CRB Entry 1_E       */
+
+#define    IIO_ICRB2_A               0x00400460    /* IO CRB Entry 2_A       */
+#define    IIO_ICRB2_B               0x00400468    /* IO CRB Entry 2_B       */
+#define    IIO_ICRB2_C               0x00400470    /* IO CRB Entry 2_C       */
+#define    IIO_ICRB2_D               0x00400478    /* IO CRB Entry 2_D       */
+#define    IIO_ICRB2_E               0x00400480    /* IO CRB Entry 2_E       */
+
+#define    IIO_ICRB3_A               0x00400490    /* IO CRB Entry 3_A       */
+#define    IIO_ICRB3_B               0x00400498    /* IO CRB Entry 3_B       */
+#define    IIO_ICRB3_C               0x004004a0    /* IO CRB Entry 3_C       */
+#define    IIO_ICRB3_D               0x004004a8    /* IO CRB Entry 3_D       */
+#define    IIO_ICRB3_E               0x004004b0    /* IO CRB Entry 3_E       */
+
+#define    IIO_ICRB4_A               0x004004c0    /* IO CRB Entry 4_A       */
+#define    IIO_ICRB4_B               0x004004c8    /* IO CRB Entry 4_B       */
+#define    IIO_ICRB4_C               0x004004d0    /* IO CRB Entry 4_C       */
+#define    IIO_ICRB4_D               0x004004d8    /* IO CRB Entry 4_D       */
+#define    IIO_ICRB4_E               0x004004e0    /* IO CRB Entry 4_E       */
+
+#define    IIO_ICRB5_A               0x004004f0    /* IO CRB Entry 5_A       */
+#define    IIO_ICRB5_B               0x004004f8    /* IO CRB Entry 5_B       */
+#define    IIO_ICRB5_C               0x00400500    /* IO CRB Entry 5_C       */
+#define    IIO_ICRB5_D               0x00400508    /* IO CRB Entry 5_D       */
+#define    IIO_ICRB5_E               0x00400510    /* IO CRB Entry 5_E       */
+
+#define    IIO_ICRB6_A               0x00400520    /* IO CRB Entry 6_A       */
+#define    IIO_ICRB6_B               0x00400528    /* IO CRB Entry 6_B       */
+#define    IIO_ICRB6_C               0x00400530    /* IO CRB Entry 6_C       */
+#define    IIO_ICRB6_D               0x00400538    /* IO CRB Entry 6_D       */
+#define    IIO_ICRB6_E               0x00400540    /* IO CRB Entry 6_E       */
+
+#define    IIO_ICRB7_A               0x00400550    /* IO CRB Entry 7_A       */
+#define    IIO_ICRB7_B               0x00400558    /* IO CRB Entry 7_B       */
+#define    IIO_ICRB7_C               0x00400560    /* IO CRB Entry 7_C       */
+#define    IIO_ICRB7_D               0x00400568    /* IO CRB Entry 7_D       */
+#define    IIO_ICRB7_E               0x00400570    /* IO CRB Entry 7_E       */
+
+#define    IIO_ICRB8_A               0x00400580    /* IO CRB Entry 8_A       */
+#define    IIO_ICRB8_B               0x00400588    /* IO CRB Entry 8_B       */
+#define    IIO_ICRB8_C               0x00400590    /* IO CRB Entry 8_C       */
+#define    IIO_ICRB8_D               0x00400598    /* IO CRB Entry 8_D       */
+#define    IIO_ICRB8_E               0x004005a0    /* IO CRB Entry 8_E       */
+
+#define    IIO_ICRB9_A               0x004005b0    /* IO CRB Entry 9_A       */
+#define    IIO_ICRB9_B               0x004005b8    /* IO CRB Entry 9_B       */
+#define    IIO_ICRB9_C               0x004005c0    /* IO CRB Entry 9_C       */
+#define    IIO_ICRB9_D               0x004005c8    /* IO CRB Entry 9_D       */
+#define    IIO_ICRB9_E               0x004005d0    /* IO CRB Entry 9_E       */
+
+#define    IIO_ICRBA_A               0x004005e0    /* IO CRB Entry A_A       */
+#define    IIO_ICRBA_B               0x004005e8    /* IO CRB Entry A_B       */
+#define    IIO_ICRBA_C               0x004005f0    /* IO CRB Entry A_C       */
+#define    IIO_ICRBA_D               0x004005f8    /* IO CRB Entry A_D       */
+#define    IIO_ICRBA_E               0x00400600    /* IO CRB Entry A_E       */
+
+#define    IIO_ICRBB_A               0x00400610    /* IO CRB Entry B_A       */
+#define    IIO_ICRBB_B               0x00400618    /* IO CRB Entry B_B       */
+#define    IIO_ICRBB_C               0x00400620    /* IO CRB Entry B_C       */
+#define    IIO_ICRBB_D               0x00400628    /* IO CRB Entry B_D       */
+#define    IIO_ICRBB_E               0x00400630    /* IO CRB Entry B_E       */
+
+#define    IIO_ICRBC_A               0x00400640    /* IO CRB Entry C_A       */
+#define    IIO_ICRBC_B               0x00400648    /* IO CRB Entry C_B       */
+#define    IIO_ICRBC_C               0x00400650    /* IO CRB Entry C_C       */
+#define    IIO_ICRBC_D               0x00400658    /* IO CRB Entry C_D       */
+#define    IIO_ICRBC_E               0x00400660    /* IO CRB Entry C_E       */
+
+#define    IIO_ICRBD_A               0x00400670    /* IO CRB Entry D_A       */
+#define    IIO_ICRBD_B               0x00400678    /* IO CRB Entry D_B       */
+#define    IIO_ICRBD_C               0x00400680    /* IO CRB Entry D_C       */
+#define    IIO_ICRBD_D               0x00400688    /* IO CRB Entry D_D       */
+#define    IIO_ICRBD_E               0x00400690    /* IO CRB Entry D_E       */
+
+#define    IIO_ICRBE_A               0x004006a0    /* IO CRB Entry E_A       */
+#define    IIO_ICRBE_B               0x004006a8    /* IO CRB Entry E_B       */
+#define    IIO_ICRBE_C               0x004006b0    /* IO CRB Entry E_C       */
+#define    IIO_ICRBE_D               0x004006b8    /* IO CRB Entry E_D       */
+#define    IIO_ICRBE_E               0x004006c0    /* IO CRB Entry E_E       */
+
+#define    IIO_ICSML                 0x00400700    /* IO CRB Spurious Message Low */
+#define    IIO_ICSMM                 0x00400708    /* IO CRB Spurious Message Middle */
+#define    IIO_ICSMH                 0x00400710    /* IO CRB Spurious Message High */
+
+#define    IIO_IDBSS                 0x00400718    /* IO Debug Submenu Select */
+
+#define    IIO_IBLS0                 0x00410000    /* IO BTE Length Status 0 */
+#define    IIO_IBSA0                 0x00410008    /* IO BTE Source Address 0 */
+#define    IIO_IBDA0                 0x00410010    /* IO BTE Destination Address 0 */
+#define    IIO_IBCT0                 0x00410018    /* IO BTE Control Terminate 0 */
+#define    IIO_IBNA0                 0x00410020    /* IO BTE Notification Address 0 */
+#define    IIO_IBIA0                 0x00410028    /* IO BTE Interrupt Address 0 */
+#define    IIO_IBLS1                 0x00420000    /* IO BTE Length Status 1 */
+#define    IIO_IBSA1                 0x00420008    /* IO BTE Source Address 1 */
+#define    IIO_IBDA1                 0x00420010    /* IO BTE Destination Address 1 */
+#define    IIO_IBCT1                 0x00420018    /* IO BTE Control Terminate 1 */
+#define    IIO_IBNA1                 0x00420020    /* IO BTE Notification Address 1 */
+#define    IIO_IBIA1                 0x00420028    /* IO BTE Interrupt Address 1 */
+
+#define    IIO_IPCR                  0x00430000    /* IO Performance Control */
+#define    IIO_IPPR                  0x00430008    /* IO Performance Profiling */
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register echoes some information from the         *
+ * LB_REV_ID register. It is available through Crosstalk as described   *
+ * above. The REV_NUM and MFG_NUM fields receive their values from      *
+ * the REVISION and MANUFACTURER fields in the LB_REV_ID register.      *
+ * The PART_NUM field's value is the Crosstalk device ID number that    *
+ * Steve Miller assigned to the SHub chip.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wid_u {
+	uint64_t	ii_wid_regval;
+	struct	{
+		uint64_t	w_rsvd_1		  :	 1;
+		uint64_t	w_mfg_num		  :	11;
+		uint64_t	w_part_num		  :	16;
+		uint64_t	w_rev_num		  :	 4;
+		uint64_t	w_rsvd			  :	32;
+	} ii_wid_fld_s;
+} ii_wid_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  The fields in this register are set upon detection of an error      *
+ * and cleared by various mechanisms, as explained in the               *
+ * description.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wstat_u {
+	uint64_t	ii_wstat_regval;
+	struct	{
+		uint64_t	w_pending		  :	 4;
+		uint64_t	w_xt_crd_to		  :	 1;
+		uint64_t	w_xt_tail_to		  :	 1;
+		uint64_t	w_rsvd_3		  :	 3;
+		uint64_t       w_tx_mx_rty               :      1;
+		uint64_t	w_rsvd_2		  :	 6;
+		uint64_t	w_llp_tx_cnt		  :	 8;
+		uint64_t	w_rsvd_1		  :	 8;
+		uint64_t	w_crazy			  :	 1;
+		uint64_t	w_rsvd			  :	31;
+	} ii_wstat_fld_s;
+} ii_wstat_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This is a read-write enabled register. It controls     *
+ * various aspects of the Crosstalk flow control.                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wcr_u {
+	uint64_t	ii_wcr_regval;
+	struct	{
+		uint64_t	w_wid			  :	 4;
+		uint64_t	w_tag			  :	 1;
+		uint64_t	w_rsvd_1		  :	 8;
+		uint64_t	w_dst_crd		  :	 3;
+		uint64_t	w_f_bad_pkt		  :	 1;
+		uint64_t	w_dir_con		  :	 1;
+		uint64_t	w_e_thresh		  :	 5;
+		uint64_t	w_rsvd			  :	41;
+	} ii_wcr_fld_s;
+} ii_wcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register's value is a bit vector that guards      *
+ * access to local registers within the II as well as to external       *
+ * Crosstalk widgets. Each bit in the register corresponds to a         *
+ * particular region in the system; a region consists of one, two or    *
+ * four nodes (depending on the value of the REGION_SIZE field in the   *
+ * LB_REV_ID register, which is documented in Section 8.3.1.1). The     *
+ * protection provided by this register applies to PIO read             *
+ * operations as well as PIO write operations. The II will perform a    *
+ * PIO read or write request only if the bit for the requestor's        *
+ * region is set; otherwise, the II will not perform the requested      *
+ * operation and will return an error response. When a PIO read or      *
+ * write request targets an external Crosstalk widget, then not only    *
+ * must the bit for the requestor's region be set in the ILAPR, but     *
+ * also the target widget's bit in the IOWA register must be set in     *
+ * order for the II to perform the requested operation; otherwise,      *
+ * the II will return an error response. Hence, the protection          *
+ * provided by the IOWA register supplements the protection provided    *
+ * by the ILAPR for requests that target external Crosstalk widgets.    *
+ * This register itself can be accessed only by the nodes whose         *
+ * region ID bits are enabled in this same register. It can also be     *
+ * accessed through the IAlias space by the local processors.           *
+ * The reset value of this register allows access by all nodes.         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilapr_u {
+	uint64_t	ii_ilapr_regval;
+	struct  {
+		uint64_t	i_region                  :	64;
+	} ii_ilapr_fld_s;
+} ii_ilapr_u_t;
+
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  A write to this register of the 64-bit value           *
+ * "SGIrules" in ASCII, will cause the bit in the ILAPR register        *
+ * corresponding to the region of the requestor to be set (allow        *
+ * access). A write of any other value will be ignored. Access          *
+ * protection for this register is "SGIrules".                          *
+ * This register can also be accessed through the IAlias space.         *
+ * However, this access will not change the access permissions in the   *
+ * ILAPR.                                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilapo_u {
+	uint64_t	ii_ilapo_regval;
+	struct	{
+		uint64_t	i_io_ovrride            :	64;
+	} ii_ilapo_fld_s;
+} ii_ilapo_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register qualifies all the PIO and Graphics writes launched    *
+ * from the SHUB towards a widget.                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iowa_u {
+	uint64_t	ii_iowa_regval;
+	struct	{
+		uint64_t	i_w0_oac		  :	 1;
+		uint64_t	i_rsvd_1		  :	 7;
+                uint64_t       i_wx_oac                  :      8;
+		uint64_t	i_rsvd			  :	48;
+	} ii_iowa_fld_s;
+} ii_iowa_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the requests launched      *
+ * from a widget towards the Shub. This register is intended to be      *
+ * used by software in case of misbehaving widgets.                     *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iiwa_u {
+	uint64_t	ii_iiwa_regval;
+	struct  {
+		uint64_t	i_w0_iac                  :	 1;
+		uint64_t	i_rsvd_1		  :	 7;
+		uint64_t	i_wx_iac		  :	 8;
+		uint64_t	i_rsvd			  :	48;
+	} ii_iiwa_fld_s;
+} ii_iiwa_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the operations launched    *
+ * from a widget towards the SHub. It allows individual access          *
+ * control for up to 8 devices per widget. A device refers to           *
+ * individual DMA master hosted by a widget.                            *
+ * The bits in each field of this register are cleared by the Shub      *
+ * upon detection of an error which requires the device to be           *
+ * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric    *
+ * Crosstalk). Whether or not a device has access rights to this        *
+ * Shub is determined by an AND of the device enable bit in the         *
+ * appropriate field of this register and the corresponding bit in      *
+ * the Wx_IAC field (for the widget which this device belongs to).      *
+ * The bits in this field are set by writing a 1 to them. Incoming      *
+ * replies from Crosstalk are not subject to this access control        *
+ * mechanism.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iidem_u {
+	uint64_t	ii_iidem_regval;
+	struct	{
+		uint64_t	i_w8_dxs		  :	 8;
+		uint64_t	i_w9_dxs		  :	 8;
+		uint64_t	i_wa_dxs		  :	 8;
+		uint64_t	i_wb_dxs		  :	 8;
+		uint64_t	i_wc_dxs		  :	 8;
+		uint64_t	i_wd_dxs		  :	 8;
+		uint64_t	i_we_dxs		  :	 8;
+		uint64_t	i_wf_dxs		  :	 8;
+	} ii_iidem_fld_s;
+} ii_iidem_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the various programmable fields necessary    *
+ * for controlling and observing the LLP signals.                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilcsr_u {
+	uint64_t	ii_ilcsr_regval;
+	struct  {
+		uint64_t	i_nullto                  :	 6;
+		uint64_t	i_rsvd_4		  :	 2;
+		uint64_t	i_wrmrst		  :	 1;
+		uint64_t	i_rsvd_3		  :	 1;
+		uint64_t	i_llp_en		  :	 1;
+		uint64_t	i_bm8			  :	 1;
+		uint64_t	i_llp_stat		  :	 2;
+		uint64_t	i_remote_power		  :	 1;
+		uint64_t	i_rsvd_2		  :	 1;
+		uint64_t	i_maxrtry		  :	10;
+		uint64_t	i_d_avail_sel		  :	 2;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_maxbrst		  :	10;
+                uint64_t       i_rsvd                    :     22;
+
+	} ii_ilcsr_fld_s;
+} ii_ilcsr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This is simply a status registers that monitors the LLP error       *
+ * rate.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_illr_u {
+	uint64_t	ii_illr_regval;
+	struct	{
+		uint64_t	i_sn_cnt		  :	16;
+		uint64_t	i_cb_cnt		  :	16;
+		uint64_t	i_rsvd			  :	32;
+	} ii_illr_fld_s;
+} ii_illr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  All II-detected non-BTE error interrupts are           *
+ * specified via this register.                                         *
+ * NOTE: The PI interrupt register address is hardcoded in the II. If   *
+ * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI      *
+ * packet) to address offset 0x0180_0090 within the local register      *
+ * address space of PI0 on the node specified by the NODE field. If     *
+ * PI_ID==1, then the II sends the interrupt request to address         *
+ * offset 0x01A0_0090 within the local register address space of PI1    *
+ * on the node specified by the NODE field.                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iidsr_u {
+	uint64_t	ii_iidsr_regval;
+	struct  {
+		uint64_t	i_level                   :	 8;
+		uint64_t	i_pi_id			  :	 1;
+		uint64_t	i_node			  :	11;
+		uint64_t       i_rsvd_3                  :      4;
+		uint64_t	i_enable		  :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_int_sent		  :	 2;
+		uint64_t       i_rsvd_1                  :      2;
+		uint64_t	i_pi0_forward_int	  :	 1;
+		uint64_t	i_pi1_forward_int	  :	 1;
+		uint64_t	i_rsvd			  :	30;
+	} ii_iidsr_fld_s;
+} ii_iidsr_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_igfx0_u {
+	uint64_t	ii_igfx0_regval;
+	struct	{
+		uint64_t	i_w_num			  :	 4;
+		uint64_t       i_pi_id                   :      1;
+		uint64_t	i_n_num			  :	12;
+		uint64_t       i_p_num                   :      1;
+		uint64_t       i_rsvd                    :     46;
+	} ii_igfx0_fld_s;
+} ii_igfx0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_igfx1_u {
+	uint64_t	ii_igfx1_regval;
+	struct  {
+		uint64_t	i_w_num			  :	 4;
+		uint64_t       i_pi_id                   :      1;
+		uint64_t	i_n_num			  :	12;
+		uint64_t       i_p_num                   :      1;
+		uint64_t       i_rsvd                    :     46;
+	} ii_igfx1_fld_s;
+} ii_igfx1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iscr0_u {
+	uint64_t	ii_iscr0_regval;
+	struct  {
+		uint64_t	i_scratch                 :	64;
+	} ii_iscr0_fld_s;
+} ii_iscr0_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iscr1_u {
+	uint64_t	ii_iscr1_regval;
+	struct  {
+		uint64_t	i_scratch                 :	64;
+	} ii_iscr1_fld_s;
+} ii_iscr1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       * 
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte1_u {
+	uint64_t	ii_itte1_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_w_num			  :	 4;
+		uint64_t	i_iosp			  :	 1;
+		uint64_t	i_rsvd			  :	51;
+	} ii_itte1_fld_s;
+} ii_itte1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte2_u {
+	uint64_t	ii_itte2_regval;
+	struct	{
+		uint64_t	i_offset		  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_w_num			  :	 4;
+		uint64_t	i_iosp			  :	 1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte2_fld_s;
+} ii_itte2_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte3_u {
+	uint64_t	ii_itte3_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte3_fld_s;
+} ii_itte3_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte4_u {
+	uint64_t	ii_itte4_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte4_fld_s;
+} ii_itte4_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte5_u {
+	uint64_t	ii_itte5_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte5_fld_s;
+} ii_itte5_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte6_u {
+	uint64_t	ii_itte6_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte6_fld_s;
+} ii_itte6_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte7_u {
+	uint64_t	ii_itte7_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte7_fld_s;
+} ii_itte7_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb0_u {
+	uint64_t	ii_iprb0_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb0_fld_s;
+} ii_iprb0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb8_u {
+	uint64_t	ii_iprb8_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t       i_rsvd_1                  :      2;
+		uint64_t       i_m                       :      2;
+		uint64_t       i_f                       :      1;
+		uint64_t       i_of_cnt                  :      5;
+		uint64_t       i_error                   :      1;
+		uint64_t       i_rd_to                   :      1;
+		uint64_t       i_spur_wr                 :      1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t       i_rsvd                    :     11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb8_fld_s;
+} ii_iprb8_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb9_u {
+	uint64_t	ii_iprb9_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb9_fld_s;
+} ii_iprb9_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.        *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprba_u {
+	uint64_t	ii_iprba_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprba_fld_s;
+} ii_iprba_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbb_u {
+	uint64_t	ii_iprbb_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbb_fld_s;
+} ii_iprbb_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbc_u {
+	uint64_t	ii_iprbc_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbc_fld_s;
+} ii_iprbc_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbd_u {
+	uint64_t	ii_iprbd_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbd_fld_s;
+} ii_iprbd_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbe_u {
+	uint64_t	ii_iprbe_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbe_fld_s;
+} ii_iprbe_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of Shub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbf_u {
+        uint64_t       ii_iprbf_regval;
+        struct  {
+                uint64_t       i_c                       :      8;
+                uint64_t       i_na                      :     14;
+                uint64_t       i_rsvd_2                  :      2;
+                uint64_t       i_nb                      :     14;
+                uint64_t       i_rsvd_1                  :      2;
+                uint64_t       i_m                       :      2;
+                uint64_t       i_f                       :      1;
+                uint64_t       i_of_cnt                  :      5;
+                uint64_t       i_error                   :      1;
+                uint64_t       i_rd_to                   :      1;
+                uint64_t       i_spur_wr                 :      1;
+                uint64_t       i_spur_rd                 :      1;
+                uint64_t       i_rsvd                    :     11;
+                uint64_t       i_mult_err                :      1;
+        } ii_iprbe_fld_s;
+} ii_iprbf_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register specifies the timeout value to use for monitoring     *
+ * Crosstalk credits which are used outbound to Crosstalk. An           *
+ * internal counter called the Crosstalk Credit Timeout Counter         *
+ * increments every 128 II clocks. The counter starts counting          *
+ * anytime the credit count drops below a threshold, and resets to      *
+ * zero (stops counting) anytime the credit count is at or above the    *
+ * threshold. The threshold is 1 credit in direct connect mode and 2    *
+ * in Crossbow connect mode. When the internal Crosstalk Credit         *
+ * Timeout Counter reaches the value programmed in this register, a     *
+ * Crosstalk Credit Timeout has occurred. The internal counter is not   *
+ * readable from software, and stops counting at its maximum value,     *
+ * so it cannot cause more than one interrupt.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixcc_u {
+	uint64_t	ii_ixcc_regval;
+	struct  {
+		uint64_t	i_time_out                :	26;
+		uint64_t	i_rsvd			  :	38;
+	} ii_ixcc_fld_s;
+} ii_ixcc_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the PIO and DMA            *
+ * operations launched from widget 0 towards the SHub. In               *
+ * addition, it also qualifies accesses by the BTE streams.             *
+ * The bits in each field of this register are cleared by the SHub      *
+ * upon detection of an error which requires widget 0 or the BTE        *
+ * streams to be terminated. Whether or not widget x has access         *
+ * rights to this SHub is determined by an AND of the device            *
+ * enable bit in the appropriate field of this register and bit 0 in    *
+ * the Wx_IAC field. The bits in this field are set by writing a 1 to   *
+ * them. Incoming replies from Crosstalk are not subject to this        *
+ * access control mechanism.                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_imem_u {
+	uint64_t	ii_imem_regval;
+	struct  {
+		uint64_t	i_w0_esd                  :	 1;
+		uint64_t	i_rsvd_3		  :	 3;
+		uint64_t	i_b0_esd		  :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_b1_esd		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_clr_precise		  :	 1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_imem_fld_s;
+} ii_imem_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register specifies the timeout value to use for   *
+ * monitoring Crosstalk tail flits coming into the Shub in the          *
+ * TAIL_TO field. An internal counter associated with this register     *
+ * is incremented every 128 II internal clocks (7 bits). The counter    *
+ * starts counting anytime a header micropacket is received and stops   *
+ * counting (and resets to zero) any time a micropacket with a Tail     *
+ * bit is received. Once the counter reaches the threshold value        *
+ * programmed in this register, it generates an interrupt to the        *
+ * processor that is programmed into the IIDSR. The counter saturates   *
+ * (does not roll over) at its maximum value, so it cannot cause        *
+ * another interrupt until after it is cleared.                         *
+ * The register also contains the Read Response Timeout values. The     *
+ * Prescalar is 23 bits, and counts II clocks. An internal counter      *
+ * increments on every II clock and when it reaches the value in the    *
+ * Prescalar field, all IPRTE registers with their valid bits set       *
+ * have their Read Response timers bumped. Whenever any of them match   *
+ * the value in the RRSP_TO field, a Read Response Timeout has          *
+ * occurred, and error handling occurs as described in the Error        *
+ * Handling section of this document.                                   *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixtt_u {
+	uint64_t	ii_ixtt_regval;
+	struct  {
+		uint64_t	i_tail_to                 :	26;
+		uint64_t	i_rsvd_1		  :	 6;
+		uint64_t	i_rrsp_ps		  :	23;
+		uint64_t	i_rrsp_to		  :	 5;
+		uint64_t	i_rsvd			  :	 4;
+	} ii_ixtt_fld_s;
+} ii_ixtt_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing a 1 to the fields of this register clears the appropriate   *
+ * error bits in other areas of SHub. Note that when the                *
+ * E_PRB_x bits are used to clear error bits in PRB registers,          *
+ * SPUR_RD and SPUR_WR may persist, because they require additional     *
+ * action to clear them. See the IPRBx and IXSS Register                *
+ * specifications.                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ieclr_u {
+	uint64_t	ii_ieclr_regval;
+	struct  {
+		uint64_t	i_e_prb_0                 :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_e_prb_8		  :	 1;
+		uint64_t	i_e_prb_9		  :	 1;
+		uint64_t	i_e_prb_a		  :	 1;
+		uint64_t	i_e_prb_b		  :	 1;
+		uint64_t	i_e_prb_c		  :	 1;
+		uint64_t	i_e_prb_d		  :	 1;
+		uint64_t	i_e_prb_e		  :	 1;
+		uint64_t	i_e_prb_f		  :	 1;
+		uint64_t	i_e_crazy		  :	 1;
+		uint64_t	i_e_bte_0		  :	 1;
+		uint64_t	i_e_bte_1		  :	 1;
+		uint64_t	i_reserved_1		  :	10;
+		uint64_t	i_spur_rd_hdr		  :	 1;
+		uint64_t	i_cam_intr_to		  :	 1;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_ii_xn_rep_cred_overflow :	 1;
+		uint64_t	i_ii_xn_req_cred_overflow :	 1;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_reserved_2		  :	21;
+	} ii_ieclr_fld_s;
+} ii_ieclr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register controls both BTEs. SOFT_RESET is intended for        *
+ * recovery after an error. COUNT controls the total number of CRBs     *
+ * that both BTEs (combined) can use, which affects total BTE           *
+ * bandwidth.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibcr_u {
+	uint64_t	ii_ibcr_regval;
+	struct  {
+		uint64_t	i_count                   :	 4;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_soft_reset		  :	 1;
+		uint64_t	i_rsvd			  :	55;
+	} ii_ibcr_fld_s;
+} ii_ibcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the header of a spurious read response       *
+ * received from Crosstalk. A spurious read response is defined as a    *
+ * read response received by II from a widget for which (1) the SIDN    *
+ * has a value between 1 and 7, inclusive (II never sends requests to   *
+ * these widgets (2) there is no valid IPRTE register which             *
+ * corresponds to the TNUM, or (3) the widget indicated in SIDN is      *
+ * not the same as the widget recorded in the IPRTE register            *
+ * referenced by the TNUM. If this condition is true, and if the        *
+ * IXSS[VALID] bit is clear, then the header of the spurious read       *
+ * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
+ * errant header is thereby captured, and no further spurious read      *
+ * respones are captured until IXSS[VALID] is cleared by setting the    *
+ * appropriate bit in IECLR.Everytime a spurious read response is       *
+ * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
+ * message's SIDN field is set. This always happens, regarless of       *
+ * whether a header is captured. The programmer should check            *
+ * IXSM[SIDN] to determine which widget sent the spurious response,     *
+ * because there may be more than one SPUR_RD bit set in the PRB        *
+ * registers. The widget indicated by IXSM[SIDN] was the first          *
+ * spurious read response to be received since the last time            *
+ * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB      *
+ * will be set. Any SPUR_RD bits in any other PRB registers indicate    *
+ * spurious messages from other widets which were detected after the    *
+ * header was captured..                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixsm_u {
+	uint64_t	ii_ixsm_regval;
+	struct  {
+		uint64_t	i_byte_en                 :	32;
+		uint64_t	i_reserved		  :	 1;
+		uint64_t	i_tag			  :	 3;
+		uint64_t	i_alt_pactyp		  :	 4;
+		uint64_t	i_bo			  :	 1;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_vbpm			  :	 1;
+		uint64_t	i_gbr			  :	 1;
+		uint64_t	i_ds			  :	 2;
+		uint64_t	i_ct			  :	 1;
+		uint64_t	i_tnum			  :	 5;
+		uint64_t	i_pactyp		  :	 4;
+		uint64_t	i_sidn			  :	 4;
+		uint64_t	i_didn			  :	 4;
+	} ii_ixsm_fld_s;
+} ii_ixsm_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the sideband bits of a spurious read         *
+ * response received from Crosstalk.                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixss_u {
+	uint64_t	ii_ixss_regval;
+	struct  {
+		uint64_t	i_sideband                :	 8;
+		uint64_t	i_rsvd			  :	55;
+		uint64_t	i_valid			  :	 1;
+	} ii_ixss_fld_s;
+} ii_ixss_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register enables software to access the II LLP's test port.    *
+ * Refer to the LLP 2.5 documentation for an explanation of the test    *
+ * port. Software can write to this register to program the values      *
+ * for the control fields (TestErrCapture, TestClear, TestFlit,         *
+ * TestMask and TestSeed). Similarly, software can read from this       *
+ * register to obtain the values of the test port's status outputs      *
+ * (TestCBerr, TestValid and TestData).                                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilct_u {
+	uint64_t	ii_ilct_regval;
+	struct  {
+		uint64_t	i_test_seed               :	20;
+		uint64_t	i_test_mask               :	 8;
+		uint64_t	i_test_data               :	20;
+		uint64_t	i_test_valid              :	 1;
+		uint64_t	i_test_cberr              :	 1;
+		uint64_t	i_test_flit               :	 3;
+		uint64_t	i_test_clear              :	 1;
+		uint64_t	i_test_err_capture        :	 1;
+		uint64_t	i_rsvd                    :	 9;
+	} ii_ilct_fld_s;
+} ii_ilct_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  If the II detects an illegal incoming Duplonet packet (request or   *
+ * reply) when VALID==0 in the IIEPH1 register, then it saves the       *
+ * contents of the packet's header flit in the IIEPH1 and IIEPH2        *
+ * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit,     *
+ * and assigns a value to the ERR_TYPE field which indicates the        *
+ * specific nature of the error. The II recognizes four different       *
+ * types of errors: short request packets (ERR_TYPE==2), short reply    *
+ * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long   *
+ * reply packets (ERR_TYPE==5). The encodings for these types of        *
+ * errors were chosen to be consistent with the same types of errors    *
+ * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in    *
+ * the LB unit). If the II detects an illegal incoming Duplonet         *
+ * packet when VALID==1 in the IIEPH1 register, then it merely sets     *
+ * the OVERRUN bit to indicate that a subsequent error has happened,    *
+ * and does nothing further.                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iieph1_u {
+	uint64_t	ii_iieph1_regval;
+	struct	{
+		uint64_t	i_command		  :	 7;
+		uint64_t	i_rsvd_5		  :	 1;
+		uint64_t	i_suppl			  :	14;
+		uint64_t	i_rsvd_4		  :	 1;
+		uint64_t	i_source		  :	14;
+		uint64_t	i_rsvd_3		  :	 1;
+		uint64_t	i_err_type		  :	 4;
+		uint64_t	i_rsvd_2		  :	 4;
+		uint64_t	i_overrun		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_valid			  :	 1;
+		uint64_t	i_rsvd			  :	13;
+	} ii_iieph1_fld_s;
+} ii_iieph1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register holds the Address field from the header flit of an    *
+ * incoming erroneous Duplonet packet, along with the tail bit which    *
+ * accompanied this header flit. This register is essentially an        *
+ * extension of IIEPH1. Two registers were necessary because the 64     *
+ * bits available in only a single register were insufficient to        *
+ * capture the entire header flit of an erroneous packet.               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iieph2_u {
+	uint64_t	ii_iieph2_regval;
+	struct  {
+		uint64_t	i_rsvd_0		  :	 3;
+		uint64_t	i_address                 :	47;
+		uint64_t	i_rsvd_1		  :	10;
+		uint64_t	i_tail			  :	 1;
+		uint64_t	i_rsvd			  :	 3;
+	} ii_iieph2_fld_s;
+} ii_iieph2_u_t;
+
+
+/******************************/
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register's value is a bit vector that guards access from SXBs  *
+ * to local registers within the II as well as to external Crosstalk    *
+ * widgets								*
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_islapr_u {
+	uint64_t	ii_islapr_regval;
+	struct  {
+		uint64_t	i_region		  :	64;
+	} ii_islapr_fld_s;
+} ii_islapr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register of the 56-bit value "Pup+Bun" will cause	*
+ * the bit in the ISLAPR register corresponding to the region of the	*
+ * requestor to be set (access allowed).				(
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_islapo_u {
+	uint64_t	ii_islapo_regval;
+	struct  {
+		uint64_t	i_io_sbx_ovrride	  :	56;
+		uint64_t	i_rsvd			  :	 8;
+	} ii_islapo_fld_s;
+} ii_islapo_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Determines how long the wrapper will wait aftr an interrupt is	*
+ * initially issued from the II before it times out the outstanding	*
+ * interrupt and drops it from the interrupt queue.			* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwi_u {
+	uint64_t	ii_iwi_regval;
+	struct  {
+		uint64_t	i_prescale		  :	24;
+		uint64_t	i_rsvd			  :	 8;
+		uint64_t	i_timeout		  :	 8;
+		uint64_t	i_rsvd1			  :	 8;
+		uint64_t	i_intrpt_retry_period	  :	 8;
+		uint64_t	i_rsvd2			  :	 8;
+	} ii_iwi_fld_s;
+} ii_iwi_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Log errors which have occurred in the II wrapper. The errors are	*
+ * cleared by writing to the IECLR register.				* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwel_u {
+	uint64_t	ii_iwel_regval;
+	struct  {
+		uint64_t	i_intr_timed_out	  :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_rsvd1			  :	 2;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_rsvd2			  :	 6;
+		uint64_t	i_ii_xn_rep_cred_over_under:	 1;
+		uint64_t	i_ii_xn_req_cred_over_under:	 1;
+		uint64_t	i_rsvd3			  :	 6;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_rsvd4			  :	30;
+	} ii_iwel_fld_s;
+} ii_iwel_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Controls the II wrapper.						* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwc_u {
+	uint64_t	ii_iwc_regval;
+	struct  {
+		uint64_t	i_dma_byte_swap		  :	 1;
+		uint64_t	i_rsvd			  :	 3;
+		uint64_t	i_cam_read_lines_reset	  :	 1;
+		uint64_t	i_rsvd1			  :	 3;
+		uint64_t	i_ii_xn_cred_over_under_log:	 1;
+		uint64_t	i_rsvd2			  :	19;
+		uint64_t	i_xn_rep_iq_depth	  :	 5;
+		uint64_t	i_rsvd3			  :	 3;
+		uint64_t	i_xn_req_iq_depth	  :	 5;
+		uint64_t	i_rsvd4			  :	 3;
+		uint64_t	i_iiq_depth		  :	 6;
+		uint64_t	i_rsvd5			  :	12;
+		uint64_t	i_force_rep_cred	  :	 1;
+		uint64_t	i_force_req_cred	  :	 1;
+	} ii_iwc_fld_s;
+} ii_iwc_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Status in the II wrapper.						* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iws_u {
+	uint64_t	ii_iws_regval;
+	struct  {
+		uint64_t	i_xn_rep_iq_credits	  :	 5;
+		uint64_t	i_rsvd			  :	 3;
+		uint64_t	i_xn_req_iq_credits	  :	 5;
+		uint64_t	i_rsvd1			  :	51;
+	} ii_iws_fld_s;
+} ii_iws_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Masks errors in the IWEL register.					*
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iweim_u {
+	uint64_t	ii_iweim_regval;
+	struct  {
+		uint64_t	i_intr_timed_out	  :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_rsvd1			  :	 2;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_rsvd2			  :	 6;
+		uint64_t	i_ii_xn_rep_cred_overflow :	 1;
+		uint64_t	i_ii_xn_req_cred_overflow :	 1;
+		uint64_t	i_rsvd3			  :	 6;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_rsvd4			  :	30;
+	} ii_iweim_fld_s;
+} ii_iweim_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register causes a particular field in the           *
+ * corresponding widget's PRB entry to be adjusted up or down by 1.     *
+ * This counter should be used when recovering from error and reset     *
+ * conditions. Note that software would be capable of causing           *
+ * inadvertent overflow or underflow of these counters.                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipca_u {
+	uint64_t	ii_ipca_regval;
+	struct  {
+		uint64_t	i_wid                     :	 4;
+		uint64_t	i_adjust		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_field			  :	 2;
+		uint64_t	i_rsvd			  :	54;
+	} ii_ipca_fld_s;
+} ii_ipca_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+
+typedef union ii_iprte0a_u {
+	uint64_t	ii_iprte0a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte0a_fld_s;
+} ii_iprte0a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte1a_u {
+	uint64_t	ii_iprte1a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte1a_fld_s;
+} ii_iprte1a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte2a_u {
+	uint64_t	ii_iprte2a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte2a_fld_s;
+} ii_iprte2a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte3a_u {
+	uint64_t	ii_iprte3a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte3a_fld_s;
+} ii_iprte3a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte4a_u {
+	uint64_t	ii_iprte4a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte4a_fld_s;
+} ii_iprte4a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte5a_u {
+	uint64_t	ii_iprte5a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte5a_fld_s;
+} ii_iprte5a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte6a_u {
+	uint64_t	ii_iprte6a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte6a_fld_s;
+} ii_iprte6a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte7a_u {
+        uint64_t       ii_iprte7a_regval;
+        struct  {
+                uint64_t       i_rsvd_1                  :     54;
+                uint64_t       i_widget                  :      4;
+                uint64_t       i_to_cnt                  :      5;
+                uint64_t       i_vld                     :      1;
+        } ii_iprtea7_fld_s;
+} ii_iprte7a_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+
+typedef union ii_iprte0b_u {
+	uint64_t	ii_iprte0b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte0b_fld_s;
+} ii_iprte0b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte1b_u {
+	uint64_t	ii_iprte1b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte1b_fld_s;
+} ii_iprte1b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte2b_u {
+	uint64_t	ii_iprte2b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte2b_fld_s;
+} ii_iprte2b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte3b_u {
+	uint64_t	ii_iprte3b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte3b_fld_s;
+} ii_iprte3b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte4b_u {
+	uint64_t	ii_iprte4b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte4b_fld_s;
+} ii_iprte4b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte5b_u {
+	uint64_t	ii_iprte5b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte5b_fld_s;
+} ii_iprte5b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte6b_u {
+	uint64_t	ii_iprte6b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+
+	} ii_iprte6b_fld_s;
+} ii_iprte6b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte7b_u {
+        uint64_t       ii_iprte7b_regval;
+        struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+        } ii_iprte7b_fld_s;
+} ii_iprte7b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  SHub II contains a feature which did not exist in      *
+ * the Hub which automatically cleans up after a Read Response          *
+ * timeout, including deallocation of the IPRTE and recovery of IBuf    *
+ * space. The inclusion of this register in SHub is for backward        *
+ * compatibility                                                        *
+ * A write to this register causes an entry from the table of           *
+ * outstanding PIO Read Requests to be freed and returned to the        *
+ * stack of free entries. This register is used in handling the         *
+ * timeout errors that result in a PIO Reply never returning from       *
+ * Crosstalk.                                                           *
+ * Note that this register does not affect the contents of the IPRTE    *
+ * registers. The Valid bits in those registers have to be              *
+ * specifically turned off by software.                                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipdr_u {
+	uint64_t	ii_ipdr_regval;
+	struct  {
+		uint64_t	i_te                      :	 3;
+		uint64_t	i_rsvd_1		  :	 1;
+		uint64_t	i_pnd			  :	 1;
+		uint64_t	i_init_rpcnt		  :	 1;
+		uint64_t	i_rsvd			  :	58;
+	} ii_ipdr_fld_s;
+} ii_ipdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register causes a CRB entry to be returned to the   *
+ * queue of free CRBs. The entry should have previously been cleared    *
+ * (mark bit) via backdoor access to the pertinent CRB entry. This      *
+ * register is used in the last step of handling the errors that are    *
+ * captured and marked in CRB entries.  Briefly: 1) first error for     *
+ * DMA write from a particular device, and first error for a            *
+ * particular BTE stream, lead to a marked CRB entry, and processor     *
+ * interrupt, 2) software reads the error information captured in the   *
+ * CRB entry, and presumably takes some corrective action, 3)           *
+ * software clears the mark bit, and finally 4) software writes to      *
+ * the ICDR register to return the CRB entry to the list of free CRB    *
+ * entries.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icdr_u {
+	uint64_t	ii_icdr_regval;
+	struct  {
+		uint64_t	i_crb_num                 :	 4;
+		uint64_t	i_pnd			  :	 1;
+		uint64_t       i_rsvd                    :     59;
+	} ii_icdr_fld_s;
+} ii_icdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register provides debug access to two FIFOs inside of II.      *
+ * Both IOQ_MAX* fields of this register contain the instantaneous      *
+ * depth (in units of the number of available entries) of the           *
+ * associated IOQ FIFO.  A read of this register will return the        *
+ * number of free entries on each FIFO at the time of the read.  So     *
+ * when a FIFO is idle, the associated field contains the maximum       *
+ * depth of the FIFO.  This register is writable for debug reasons      *
+ * and is intended to be written with the maximum desired FIFO depth    *
+ * while the FIFO is idle. Software must assure that II is idle when    *
+ * this register is written. If there are any active entries in any     *
+ * of these FIFOs when this register is written, the results are        *
+ * undefined.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ifdr_u {
+	uint64_t	ii_ifdr_regval;
+	struct  {
+		uint64_t	i_ioq_max_rq              :	 7;
+		uint64_t	i_set_ioq_rq		  :	 1;
+		uint64_t	i_ioq_max_rp		  :	 7;
+		uint64_t	i_set_ioq_rp		  :	 1;
+		uint64_t	i_rsvd			  :	48;
+	} ii_ifdr_fld_s;
+} ii_ifdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the II to become sluggish in removing          *
+ * messages from its inbound queue (IIQ). This will cause messages to   *
+ * back up in either virtual channel. Disabling the "molasses" mode     *
+ * subsequently allows the II to be tested under stress. In the         *
+ * sluggish ("Molasses") mode, the localized effects of congestion      *
+ * can be observed.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iiap_u {
+        uint64_t       ii_iiap_regval;
+        struct  {
+                uint64_t       i_rq_mls                  :      6;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_rp_mls		  :	 6;
+		uint64_t       i_rsvd                    :     50;
+        } ii_iiap_fld_s;
+} ii_iiap_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows several parameters of CRB operation to be      *
+ * set. Note that writing to this register can have catastrophic side   *
+ * effects, if the CRB is not quiescent, i.e. if the CRB is             *
+ * processing protocol messages when the write occurs.                  *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icmr_u {
+	uint64_t	ii_icmr_regval;
+	struct  {
+		uint64_t	i_sp_msg                  :	 1;
+		uint64_t	i_rd_hdr		  :	 1;
+		uint64_t	i_rsvd_4		  :	 2;
+		uint64_t	i_c_cnt			  :	 4;
+		uint64_t	i_rsvd_3		  :	 4;
+		uint64_t	i_clr_rqpd		  :	 1;
+		uint64_t	i_clr_rppd		  :	 1;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_fc_cnt		  :	 4;
+		uint64_t	i_crb_vld		  :	15;
+		uint64_t	i_crb_mark		  :	15;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_precise		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+	} ii_icmr_fld_s;
+} ii_icmr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows control of the table portion of the CRB        *
+ * logic via software. Control operations from this register have       *
+ * priority over all incoming Crosstalk or BTE requests.                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iccr_u {
+	uint64_t	ii_iccr_regval;
+	struct  {
+		uint64_t	i_crb_num                 :	 4;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_cmd			  :	 8;
+		uint64_t	i_pending		  :	 1;
+		uint64_t	i_rsvd			  :	47;
+	} ii_iccr_fld_s;
+} ii_iccr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the maximum timeout value to be programmed.    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icto_u {
+	uint64_t	ii_icto_regval;
+	struct  {
+		uint64_t	i_timeout                 :	 8;
+		uint64_t	i_rsvd			  :	56;
+	} ii_icto_fld_s;
+} ii_icto_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the timeout prescalar to be programmed. An     *
+ * internal counter is associated with this register. When the          *
+ * internal counter reaches the value of the PRESCALE field, the        *
+ * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT]   *
+ * field). The internal counter resets to zero, and then continues      *
+ * counting.                                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ictp_u {
+	uint64_t	ii_ictp_regval;
+	struct  {
+		uint64_t	i_prescale                :	24;
+		uint64_t	i_rsvd			  :	40;
+	} ii_ictp_fld_s;
+} ii_ictp_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ * The CRB Entry registers can be conceptualized as rows and columns    *
+ * (illustrated in the table above). Each row contains the 4            *
+ * registers required for a single CRB Entry. The first doubleword      *
+ * (column) for each entry is labeled A, and the second doubleword      *
+ * (higher address) is labeled B, the third doubleword is labeled C,    *
+ * the fourth doubleword is labeled D and the fifth doubleword is       *
+ * labeled E. All CRB entries have their addresses on a quarter         *
+ * cacheline aligned boundary.                   *
+ * Upon reset, only the following fields are initialized: valid         *
+ * (VLD), priority count, timeout, timeout valid, and context valid.    *
+ * All other bits should be cleared by software before use (after       *
+ * recovering any potential error state from before the reset).         *
+ * The following four tables summarize the format for the four          *
+ * registers that are used for each ICRB# Entry.                        *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_a_u {
+	uint64_t	ii_icrb0_a_regval;
+	struct  {
+		uint64_t	ia_iow                    :	 1;
+		uint64_t	ia_vld			  :	 1;
+		uint64_t	ia_addr			  :	47;
+		uint64_t	ia_tnum			  :	 5;
+		uint64_t	ia_sidn			  :	 4;
+		uint64_t       ia_rsvd                   :      6;
+	} ii_icrb0_a_fld_s;
+} ii_icrb0_a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_b_u {
+	uint64_t	ii_icrb0_b_regval;
+	struct	{
+		uint64_t	ib_xt_err		  :	 1;
+		uint64_t	ib_mark			  :	 1;
+		uint64_t	ib_ln_uce		  :	 1;
+		uint64_t	ib_errcode		  :	 3;
+		uint64_t	ib_error		  :	 1;
+		uint64_t	ib_stall__bte_1		  :	 1;
+		uint64_t	ib_stall__bte_0		  :	 1;
+		uint64_t	ib_stall__intr		  :	 1;
+		uint64_t	ib_stall_ib		  :	 1;
+		uint64_t	ib_intvn		  :	 1;
+		uint64_t	ib_wb			  :	 1;
+		uint64_t	ib_hold			  :	 1;
+		uint64_t	ib_ack			  :	 1;
+		uint64_t	ib_resp			  :	 1;
+		uint64_t	ib_ack_cnt		  :	11;
+		uint64_t	ib_rsvd			  :	 7;
+		uint64_t	ib_exc			  :	 5;
+		uint64_t	ib_init			  :	 3;
+		uint64_t	ib_imsg			  :	 8;
+		uint64_t	ib_imsgtype		  :	 2;
+		uint64_t	ib_use_old		  :	 1;
+		uint64_t	ib_rsvd_1		  :	11;
+	} ii_icrb0_b_fld_s;
+} ii_icrb0_b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_c_u {
+	uint64_t	ii_icrb0_c_regval;
+	struct	{
+		uint64_t	ic_source		  :	15;
+		uint64_t	ic_size			  :	 2;
+		uint64_t	ic_ct			  :	 1;
+		uint64_t	ic_bte_num		  :	 1;
+		uint64_t	ic_gbr			  :	 1;
+		uint64_t	ic_resprqd		  :	 1;
+		uint64_t	ic_bo			  :	 1;
+		uint64_t	ic_suppl		  :	15;
+		uint64_t	ic_rsvd			  :	27;
+	} ii_icrb0_c_fld_s;
+} ii_icrb0_c_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_d_u {
+	uint64_t	ii_icrb0_d_regval;
+	struct  {
+		uint64_t	id_pa_be                  :	43;
+		uint64_t	id_bte_op		  :	 1;
+		uint64_t	id_pr_psc		  :	 4;
+		uint64_t	id_pr_cnt		  :	 4;
+		uint64_t	id_sleep		  :	 1;
+		uint64_t	id_rsvd			  :	11;
+	} ii_icrb0_d_fld_s;
+} ii_icrb0_d_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_e_u {
+	uint64_t	ii_icrb0_e_regval;
+	struct  {
+		uint64_t	ie_timeout                :	 8;
+		uint64_t	ie_context		  :	15;
+		uint64_t	ie_rsvd			  :	 1;
+		uint64_t	ie_tvld			  :	 1;
+		uint64_t	ie_cvld			  :	 1;
+		uint64_t	ie_rsvd_0		  :	38;
+	} ii_icrb0_e_fld_s;
+} ii_icrb0_e_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the lower 64 bits of the header of the       *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsml_u {
+	uint64_t	ii_icsml_regval;
+	struct  {
+		uint64_t	i_tt_addr                 :	47;
+		uint64_t	i_newsuppl_ex		  :	14;
+		uint64_t	i_reserved		  :	 2;
+		uint64_t       i_overflow                :      1;
+	} ii_icsml_fld_s;
+} ii_icsml_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the middle 64 bits of the header of the      *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsmm_u {
+	uint64_t	ii_icsmm_regval;
+	struct  {
+		uint64_t	i_tt_ack_cnt              :	11;
+		uint64_t	i_reserved		  :	53;
+	} ii_icsmm_fld_s;
+} ii_icsmm_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the microscopic state, all the inputs to     *
+ * the protocol table, captured with the spurious message. Valid when   *
+ * the SP_MSG bit in the ICMR register is set.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsmh_u {
+	uint64_t	ii_icsmh_regval;
+	struct  {
+		uint64_t	i_tt_vld                  :	 1;
+		uint64_t	i_xerr			  :	 1;
+		uint64_t	i_ft_cwact_o		  :	 1;
+		uint64_t	i_ft_wact_o		  :	 1;
+		uint64_t       i_ft_active_o             :      1;
+		uint64_t	i_sync			  :	 1;
+		uint64_t	i_mnusg			  :	 1;
+		uint64_t	i_mnusz			  :	 1;
+		uint64_t	i_plusz			  :	 1;
+		uint64_t	i_plusg			  :	 1;
+		uint64_t	i_tt_exc		  :	 5;
+		uint64_t	i_tt_wb			  :	 1;
+		uint64_t	i_tt_hold		  :	 1;
+		uint64_t	i_tt_ack		  :	 1;
+		uint64_t	i_tt_resp		  :	 1;
+		uint64_t	i_tt_intvn		  :	 1;
+		uint64_t	i_g_stall_bte1		  :	 1;
+		uint64_t	i_g_stall_bte0		  :	 1;
+		uint64_t	i_g_stall_il		  :	 1;
+		uint64_t	i_g_stall_ib		  :	 1;
+		uint64_t	i_tt_imsg		  :	 8;
+		uint64_t	i_tt_imsgtype		  :	 2;
+		uint64_t	i_tt_use_old		  :	 1;
+		uint64_t	i_tt_respreqd		  :	 1;
+		uint64_t	i_tt_bte_num		  :	 1;
+		uint64_t	i_cbn			  :	 1;
+		uint64_t	i_match			  :	 1;
+		uint64_t	i_rpcnt_lt_34		  :	 1;
+		uint64_t	i_rpcnt_ge_34		  :	 1;
+		uint64_t	i_rpcnt_lt_18		  :	 1;
+		uint64_t	i_rpcnt_ge_18		  :	 1;
+		uint64_t       i_rpcnt_lt_2              :      1;
+		uint64_t	i_rpcnt_ge_2		  :	 1;
+		uint64_t	i_rqcnt_lt_18		  :	 1;
+		uint64_t	i_rqcnt_ge_18		  :	 1;
+		uint64_t	i_rqcnt_lt_2		  :	 1;
+		uint64_t	i_rqcnt_ge_2		  :	 1;
+		uint64_t	i_tt_device		  :	 7;
+		uint64_t	i_tt_init		  :	 3;
+		uint64_t	i_reserved		  :	 5;
+	} ii_icsmh_fld_s;
+} ii_icsmh_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  The Shub DEBUG unit provides a 3-bit selection signal to the        *
+ * II core and a 3-bit selection signal to the fsbclk domain in the II  *
+ * wrapper.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_idbss_u {
+	uint64_t	ii_idbss_regval;
+	struct  {
+		uint64_t	i_iioclk_core_submenu     :	 3;
+		uint64_t	i_rsvd			  :	 5;
+		uint64_t	i_fsbclk_wrapper_submenu  :	 3;
+		uint64_t	i_rsvd_1		  :	 5;
+		uint64_t	i_iioclk_menu		  :	 5;
+		uint64_t	i_rsvd_2		  :	43;
+	} ii_idbss_fld_s;
+} ii_idbss_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibls0_u {
+	uint64_t	ii_ibls0_regval;
+	struct	{
+		uint64_t	i_length		  :	16;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_busy			  :	 1;
+		uint64_t       i_rsvd                    :     43;
+	} ii_ibls0_fld_s;
+} ii_ibls0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibsa0_u {
+	uint64_t	ii_ibsa0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t       i_rsvd                    :     15;
+	} ii_ibsa0_fld_s;
+} ii_ibsa0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibda0_u {
+	uint64_t	ii_ibda0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t	i_rsvd			  :	15;
+	} ii_ibda0_fld_s;
+} ii_ibda0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibct0_u {
+	uint64_t	ii_ibct0_regval;
+	struct  {
+		uint64_t	i_zerofill                :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_notify		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_poison                  :      1;
+		uint64_t       i_rsvd                    :     55;
+	} ii_ibct0_fld_s;
+} ii_ibct0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibna0_u {
+	uint64_t	ii_ibna0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t	i_rsvd			  :	15;
+	} ii_ibna0_fld_s;
+} ii_ibna0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibia0_u {
+	uint64_t	ii_ibia0_regval;
+	struct  {
+		uint64_t	i_rsvd_2                   :	 1;
+		uint64_t	i_node_id		  :	11;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_level			  :	 7;
+		uint64_t       i_rsvd                    :     41;
+	} ii_ibia0_fld_s;
+} ii_ibia0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibls1_u {
+	uint64_t	ii_ibls1_regval;
+	struct  {
+		uint64_t	i_length                  :	16;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_busy			  :	 1;
+		uint64_t       i_rsvd                    :     43;
+	} ii_ibls1_fld_s;
+} ii_ibls1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibsa1_u {
+	uint64_t	ii_ibsa1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t	i_rsvd			  :	24;
+	} ii_ibsa1_fld_s;
+} ii_ibsa1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibda1_u {
+	uint64_t	ii_ibda1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t	i_rsvd			  :	24;
+	} ii_ibda1_fld_s;
+} ii_ibda1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibct1_u {
+	uint64_t	ii_ibct1_regval;
+	struct  {
+		uint64_t	i_zerofill                :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_notify		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_poison		  :	 1;
+		uint64_t	i_rsvd			  :	55;
+	} ii_ibct1_fld_s;
+} ii_ibct1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibna1_u {
+	uint64_t	ii_ibna1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t       i_rsvd                    :     24;
+	} ii_ibna1_fld_s;
+} ii_ibna1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibia1_u {
+	uint64_t	ii_ibia1_regval;
+	struct  {
+		uint64_t	i_pi_id                   :	 1;
+		uint64_t	i_node_id		  :	 8;
+		uint64_t	i_rsvd_1		  :	 7;
+		uint64_t	i_level			  :	 7;
+		uint64_t	i_rsvd			  :	41;
+	} ii_ibia1_fld_s;
+} ii_ibia1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register defines the resources that feed information into      *
+ * the two performance counters located in the IO Performance           *
+ * Profiling Register. There are 17 different quantities that can be    *
+ * measured. Given these 17 different options, the two performance      *
+ * counters have 15 of them in common; menu selections 0 through 0xE    *
+ * are identical for each performance counter. As for the other two     *
+ * options, one is available from one performance counter and the       *
+ * other is available from the other performance counter. Hence, the    *
+ * II supports all 17*16=272 possible combinations of quantities to     *
+ * measure.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipcr_u {
+	uint64_t	ii_ipcr_regval;
+	struct  {
+		uint64_t	i_ippr0_c                 :	 4;
+		uint64_t	i_ippr1_c		  :	 4;
+		uint64_t	i_icct			  :	 8;
+		uint64_t       i_rsvd                    :     48;
+	} ii_ipcr_fld_s;
+} ii_ipcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ippr_u {
+	uint64_t	ii_ippr_regval;
+	struct  {
+		uint64_t	i_ippr0                   :	32;
+		uint64_t	i_ippr1			  :	32;
+	} ii_ippr_fld_s;
+} ii_ippr_u_t;
+
+
+
+/**************************************************************************
+ *                                                                        *
+ * The following defines which were not formed into structures are        *
+ * probably indentical to another register, and the name of the           *
+ * register is provided against each of these registers. This             *
+ * information needs to be checked carefully                              *
+ *                                                                        *
+ *           IIO_ICRB1_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB1_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB1_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB1_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB1_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB2_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB2_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB2_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB2_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB2_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB3_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB3_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB3_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB3_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB3_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB4_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB4_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB4_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB4_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB4_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB5_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB5_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB5_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB5_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB5_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB6_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB6_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB6_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB6_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB6_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB7_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB7_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB7_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB7_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB7_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB8_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB8_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB8_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB8_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB8_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB9_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB9_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB9_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB9_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB9_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBA_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBA_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBA_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBA_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBA_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBB_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBB_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBB_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBB_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBB_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBC_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBC_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBC_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBC_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBC_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBD_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBD_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBD_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBD_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBD_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBE_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBE_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBE_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBE_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBE_E                IIO_ICRB0_E                       *
+ *                                                                        *
+ **************************************************************************/
+
+
+/*
+ * Slightly friendlier names for some common registers.
+ */
+#define IIO_WIDGET              IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT         IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL         IIO_WCR      /* Widget control register */
+#define IIO_PROTECT             IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD       IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS    IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS     IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK      IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR             IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG             IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT        IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT        IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR          IIO_IECLR    /* IO error clear */
+#define IIO_IGFX_0 		IIO_IGFX0
+#define IIO_IGFX_1 		IIO_IGFX1
+#define IIO_IBCT_0		IIO_IBCT0
+#define IIO_IBCT_1		IIO_IBCT1
+#define IIO_IBLS_0		IIO_IBLS0
+#define IIO_IBLS_1		IIO_IBLS1
+#define IIO_IBSA_0		IIO_IBSA0
+#define IIO_IBSA_1		IIO_IBSA1
+#define IIO_IBDA_0		IIO_IBDA0
+#define IIO_IBDA_1		IIO_IBDA1
+#define IIO_IBNA_0		IIO_IBNA0
+#define IIO_IBNA_1		IIO_IBNA1
+#define IIO_IBIA_0		IIO_IBIA0
+#define IIO_IBIA_1		IIO_IBIA1
+#define IIO_IOPRB_0		IIO_IPRB0
+
+#define IIO_PRTE_A(_x)		(IIO_IPRTE0_A + (8 * (_x)))
+#define IIO_PRTE_B(_x)		(IIO_IPRTE0_B + (8 * (_x)))
+#define IIO_NUM_PRTES		8	/* Total number of PRB table entries */
+#define IIO_WIDPRTE_A(x)	IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_WIDPRTE_B(x)	IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */
+
+#define IIO_NUM_IPRBS 		(9) 
+
+#define IIO_LLP_CSR_IS_UP               0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK       0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT       12
+
+#define IIO_LLP_CB_MAX  0xffff	/* in ILLR CB_CNT, Max Check Bit errors */
+#define IIO_LLP_SN_MAX  0xffff	/* in ILLR SN_CNT, Max Sequence Number errors */
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY   0x53474972756c6573ull   /* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0          IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0           IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0          IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0          IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0        IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0           IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0           0            /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1   	(IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT             0
+#define BTEOFF_SRC              (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST             (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL             (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY           (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT              (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/* names used in shub diags */
+#define IIO_BASE_BTE0   IIO_IBLS_0		
+#define IIO_BASE_BTE1   IIO_IBLS_1		
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x)   (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+                        (_x) : \
+                        (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_PI_NUM_BITS	1	/* size of PI num field */
+#define IIO_IGFX_PI_NUM_MASK	((1<<IIO_IGFX_PI_NUM_BITS)-1)
+#define IIO_IGFX_PI_NUM_SHIFT	4
+#define IIO_IGFX_N_NUM_BITS	8	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	5
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_INIT(widget, pi, node, cpu)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((pi)     & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)|	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
+
+
+/* Scratch registers (all bits available) */
+#define IIO_SCRATCH_REG0        IIO_ISCR0
+#define IIO_SCRATCH_REG1        IIO_ISCR1
+#define IIO_SCRATCH_MASK        0xffffffffffffffffUL
+
+#define IIO_SCRATCH_BIT0_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT0_1      0x0000000000000002UL
+#define IIO_SCRATCH_BIT0_2      0x0000000000000004UL
+#define IIO_SCRATCH_BIT0_3      0x0000000000000008UL
+#define IIO_SCRATCH_BIT0_4      0x0000000000000010UL
+#define IIO_SCRATCH_BIT0_5      0x0000000000000020UL
+#define IIO_SCRATCH_BIT0_6      0x0000000000000040UL
+#define IIO_SCRATCH_BIT0_7      0x0000000000000080UL
+#define IIO_SCRATCH_BIT0_8      0x0000000000000100UL
+#define IIO_SCRATCH_BIT0_9      0x0000000000000200UL
+#define IIO_SCRATCH_BIT0_A      0x0000000000000400UL
+
+#define IIO_SCRATCH_BIT1_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT1_1      0x0000000000000002UL
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES   7               /* ITTEs numbered 0..6 */
+                                        /* Hw manuals number them 1..7! */
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1UL             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1UL << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1UL << 8)        /* BTE 1 Shut down due to error */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the shub, we've
+ * redefined big window 7 as small window 0.
+ XXX does this still apply for SN1??
+ */
+#define HUB_NUM_BIG_WINDOW      (IIO_NUM_ITTES - 1)
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN            HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET        0x100
+
+/*
+ * CRB manipulation macros
+ *      The CRB macros are slightly complicated, since there are up to
+ *      four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS            15      /* Number of CRBs */
+#define IIO_NUM_PC_CRBS         4       /* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET         8
+#define IIO_ICRB_0              IIO_ICRB0_A
+#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+/* XXX - This is now tuneable:
+        #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)  ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
+#define IIO_ICRB_B(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
+#define IIO_ICRB_C(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
+#define IIO_ICRB_D(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
+#define IIO_ICRB_E(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
+
+#define TNUM_TO_WIDGET_DEV(_tnum)	(_tnum & 0x7)
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR     0       /* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR     1       /* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR     2       /* Write error by IIO access
+                                         * e.g. WINV to a Read only line. */
+#define IIO_ICRB_ECODE_AERR     3       /* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR    4       /* Error on partial write       */
+#define IIO_ICRB_ECODE_PRERR    5       /* Error on partial read        */
+#define IIO_ICRB_ECODE_TOUT     6       /* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR    7       /* Incoming xtalk pkt had error bit */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK    0       /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE      1       /* Incoming message from BTE    */
+#define IIO_ICRB_IMSGT_SN1NET   2       /* Incoming message from SN1 net */
+#define IIO_ICRB_IMSGT_CRB      3       /* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK     0       /* Message originated in xtalk  */
+#define IIO_ICRB_INIT_BTE0      0x1     /* Message originated in BTE 0  */
+#define IIO_ICRB_INIT_SN1NET    0x2     /* Message originated in SN1net */
+#define IIO_ICRB_INIT_CRB       0x3     /* Message originated in CRB ?  */
+#define IIO_ICRB_INIT_BTE1      0x5     /* MEssage originated in BTE 1  */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define       HUBII_XBOW_REV2_CREDIT  4
+
+/*
+ * Number of credits that xtalk devices should use when communicating
+ * with a SHub (depth of SHub's queue).
+ */
+#define HUB_CREDIT 4
+
+/*
+ * Some IIO_PRB fields
+ */
+#define IIO_PRB_MULTI_ERR	(1LL << 63)
+#define IIO_PRB_SPUR_RD		(1LL << 51)
+#define IIO_PRB_SPUR_WR		(1LL << 50)
+#define IIO_PRB_RD_TO		(1LL << 49)
+#define IIO_PRB_ERROR		(1LL << 48)
+
+/*************************************************************************
+
+ Some of the IIO field masks and shifts are defined here.
+ This is in order to maintain compatibility in SN0 and SN1 code
+ 
+**************************************************************************/
+
+/*
+ * ICMR register fields
+ * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
+ * present in SHub)
+ */
+
+#define IIO_ICMR_CRB_VLD_SHFT   20
+#define IIO_ICMR_CRB_VLD_MASK   (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT    16
+#define IIO_ICMR_FC_CNT_MASK    (0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT     4
+#define IIO_ICMR_C_CNT_MASK     (0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE        (1UL << 52)
+#define IIO_ICMR_CLR_RPPD       (1UL << 13)
+#define IIO_ICMR_CLR_RQPD       (1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ XXX present but not needed in bedrock?  See the manual.
+ */
+#define IIO_IPDR_PND    (1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND    (1 << 4)
+
+/* 
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1UL << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1UL << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1UL << 8)
+#define IBCT_NOTIFY		(0x1UL << 4)
+#define IBCT_ZFIL_MODE		(0x1UL << 0)
+
+/*
+ * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
+ */
+#define IIEPH1_VALID		(1UL << 44)
+#define IIEPH1_OVERRUN		(1UL << 40)
+#define IIEPH1_ERR_TYPE_SHFT	32
+#define IIEPH1_ERR_TYPE_MASK	0xf
+#define IIEPH1_SOURCE_SHFT	20
+#define IIEPH1_SOURCE_MASK	11
+#define IIEPH1_SUPPL_SHFT	8
+#define IIEPH1_SUPPL_MASK	11
+#define IIEPH1_CMD_SHFT		0
+#define IIEPH1_CMD_MASK		7
+
+#define IIEPH2_TAIL		(1UL << 40)
+#define IIEPH2_ADDRESS_SHFT	0
+#define IIEPH2_ADDRESS_MASK	38
+
+#define IIEPH1_ERR_SHORT_REQ	2
+#define IIEPH1_ERR_SHORT_REPLY	3
+#define IIEPH1_ERR_LONG_REQ	4
+#define IIEPH1_ERR_LONG_REPLY	5
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_PI1_FWD_INT	(1UL << 31)  /* clear PI1_FORWARD_INT in iidsr */
+#define IECLR_PI0_FWD_INT	(1UL << 30)  /* clear PI0_FORWARD_INT in iidsr */
+#define IECLR_SPUR_RD_HDR	(1UL << 29)  /* clear valid bit in ixss reg */
+#define IECLR_BTE1		(1UL << 18)  /* clear bte error 1 */
+#define IECLR_BTE0		(1UL << 17)  /* clear bte error 0 */
+#define IECLR_CRAZY		(1UL << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1UL << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1UL << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1UL << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1UL << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1UL << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1UL << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1UL << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1UL << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1UL << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR 
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory 
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to shub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Easy access macros for CRBs, all 5 registers (A-E)
+ */
+typedef ii_icrb0_a_u_t icrba_t;
+#define a_sidn          ii_icrb0_a_fld_s.ia_sidn
+#define a_tnum          ii_icrb0_a_fld_s.ia_tnum
+#define a_addr          ii_icrb0_a_fld_s.ia_addr
+#define a_valid         ii_icrb0_a_fld_s.ia_vld
+#define a_iow           ii_icrb0_a_fld_s.ia_iow
+#define a_regvalue	ii_icrb0_a_regval
+
+typedef ii_icrb0_b_u_t icrbb_t;
+#define b_use_old       ii_icrb0_b_fld_s.ib_use_old
+#define b_imsgtype      ii_icrb0_b_fld_s.ib_imsgtype
+#define b_imsg          ii_icrb0_b_fld_s.ib_imsg
+#define b_initiator     ii_icrb0_b_fld_s.ib_init
+#define b_exc           ii_icrb0_b_fld_s.ib_exc
+#define b_ackcnt        ii_icrb0_b_fld_s.ib_ack_cnt
+#define b_resp          ii_icrb0_b_fld_s.ib_resp
+#define b_ack           ii_icrb0_b_fld_s.ib_ack
+#define b_hold          ii_icrb0_b_fld_s.ib_hold
+#define b_wb            ii_icrb0_b_fld_s.ib_wb
+#define b_intvn         ii_icrb0_b_fld_s.ib_intvn
+#define b_stall_ib      ii_icrb0_b_fld_s.ib_stall_ib
+#define b_stall_int     ii_icrb0_b_fld_s.ib_stall__intr
+#define b_stall_bte_0   ii_icrb0_b_fld_s.ib_stall__bte_0
+#define b_stall_bte_1   ii_icrb0_b_fld_s.ib_stall__bte_1
+#define b_error         ii_icrb0_b_fld_s.ib_error
+#define b_ecode         ii_icrb0_b_fld_s.ib_errcode
+#define b_lnetuce       ii_icrb0_b_fld_s.ib_ln_uce
+#define b_mark          ii_icrb0_b_fld_s.ib_mark
+#define b_xerr          ii_icrb0_b_fld_s.ib_xt_err
+#define b_regvalue	ii_icrb0_b_regval
+
+typedef ii_icrb0_c_u_t icrbc_t;
+#define c_suppl         ii_icrb0_c_fld_s.ic_suppl
+#define c_barrop        ii_icrb0_c_fld_s.ic_bo
+#define c_doresp        ii_icrb0_c_fld_s.ic_resprqd
+#define c_gbr           ii_icrb0_c_fld_s.ic_gbr
+#define c_btenum        ii_icrb0_c_fld_s.ic_bte_num
+#define c_cohtrans      ii_icrb0_c_fld_s.ic_ct
+#define c_xtsize        ii_icrb0_c_fld_s.ic_size
+#define c_source        ii_icrb0_c_fld_s.ic_source
+#define c_regvalue	ii_icrb0_c_regval
+
+
+typedef ii_icrb0_d_u_t icrbd_t;
+#define d_sleep         ii_icrb0_d_fld_s.id_sleep
+#define d_pricnt        ii_icrb0_d_fld_s.id_pr_cnt
+#define d_pripsc        ii_icrb0_d_fld_s.id_pr_psc
+#define d_bteop         ii_icrb0_d_fld_s.id_bte_op
+#define d_bteaddr       ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_benable       ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_regvalue	ii_icrb0_d_regval
+
+typedef ii_icrb0_e_u_t icrbe_t;
+#define icrbe_ctxtvld   ii_icrb0_e_fld_s.ie_cvld
+#define icrbe_toutvld   ii_icrb0_e_fld_s.ie_tvld
+#define icrbe_context   ii_icrb0_e_fld_s.ie_context
+#define icrbe_timeout   ii_icrb0_e_fld_s.ie_timeout
+#define e_regvalue	ii_icrb0_e_regval
+
+
+/* Number of widgets supported by shub */
+#define HUB_NUM_WIDGET          9
+#define HUB_WIDGET_ID_MIN       0x8
+#define HUB_WIDGET_ID_MAX       0xf
+
+#define HUB_WIDGET_PART_NUM     0xc120
+#define MAX_HUBS_PER_XBOW       2
+
+/* A few more #defines for backwards compatibility */
+#define iprb_t          ii_iprb0_u_t
+#define iprb_regval     ii_iprb0_regval
+#define iprb_mult_err	ii_iprb0_fld_s.i_mult_err
+#define iprb_spur_rd	ii_iprb0_fld_s.i_spur_rd
+#define iprb_spur_wr	ii_iprb0_fld_s.i_spur_wr
+#define iprb_rd_to	ii_iprb0_fld_s.i_rd_to
+#define iprb_ovflow     ii_iprb0_fld_s.i_of_cnt
+#define iprb_error      ii_iprb0_fld_s.i_error
+#define iprb_ff         ii_iprb0_fld_s.i_f
+#define iprb_mode       ii_iprb0_fld_s.i_m
+#define iprb_bnakctr    ii_iprb0_fld_s.i_nb
+#define iprb_anakctr    ii_iprb0_fld_s.i_na
+#define iprb_xtalkctr   ii_iprb0_fld_s.i_c
+
+#define LNK_STAT_WORKING        0x2		/* LLP is working */
+
+#define IIO_WSTAT_ECRAZY        (1ULL << 32)    /* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY       (1ULL << 9)     /* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK  (0x7F)   /* should be 0xFF?? */
+#define IIO_WSTAT_TXRETRY_SHFT  (16)
+#define IIO_WSTAT_TXRETRY_CNT(w)        (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+                                          IIO_WSTAT_TXRETRY_MASK)
+
+/* Number of II perf. counters we can multiplex at once */
+
+#define IO_PERF_SETS	32
+
+/* Bit for the widget in inbound access register */
+#define IIO_IIWA_WIDGET(_w)     ((uint64_t)(1ULL << _w))
+/* Bit for the widget in outbound access register */
+#define IIO_IOWA_WIDGET(_w)     ((uint64_t)(1ULL << _w))
+
+/* NOTE: The following define assumes that we are going to get
+ * widget numbers from 8 thru F and the device numbers within
+ * widget from 0 thru 7.
+ */
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d)  ((uint64_t)(1ULL << (8 * ((w) - 8) + (d))))
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT    28
+#define IIO_IIDSR_SENT_MASK     0x30000000
+#define IIO_IIDSR_ENB_SHIFT     24
+#define IIO_IIDSR_ENB_MASK      0x01000000
+#define IIO_IIDSR_NODE_SHIFT    9
+#define IIO_IIDSR_NODE_MASK     0x000ff700
+#define IIO_IIDSR_PI_ID_SHIFT   8
+#define IIO_IIDSR_PI_ID_MASK    0x00000100
+#define IIO_IIDSR_LVL_SHIFT     0
+#define IIO_IIDSR_LVL_MASK      0x000000ff
+
+/* Xtalk timeout threshhold register (IIO_IXTT) */
+#define IXTT_RRSP_TO_SHFT	55	   /* read response timeout */
+#define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
+#define IXTT_RRSP_PS_SHFT	32	   /* read responsed TO prescalar */
+#define IXTT_RRSP_PS_MASK	(0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
+#define IXTT_TAIL_TO_SHFT	0	   /* tail timeout counter threshold */
+#define IXTT_TAIL_TO_MASK	(0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
+
+/*
+ * The IO LLP control status register and widget control register
+ */
+
+typedef union hubii_wcr_u {
+        uint64_t      wcr_reg_value;
+        struct {
+	  uint64_t	wcr_widget_id:   4,     /* LLP crossbar credit */
+			wcr_tag_mode:	 1,	/* Tag mode */
+			wcr_rsvd1:	 8,	/* Reserved */
+			wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+			wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+			wcr_dir_con:	 1,	/* widget direct connect */
+			wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_rsvd:	41;	/* unused */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con    wcr_fields_s.wcr_dir_con
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+
+typedef union io_perf_sel {
+        uint64_t perf_sel_reg;
+        struct {
+               uint64_t	perf_ippr0 :  4,
+				perf_ippr1 :  4,
+				perf_icct  :  8,
+				perf_rsvd  : 48;
+        } perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the shub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+        uint64_t      perf_cnt;
+        struct {
+               uint64_t	perf_cnt   : 20,
+				perf_rsvd2 : 12,
+				perf_rsvd1 : 32;
+        } perf_cnt_bits;
+
+} io_perf_cnt_t;
+
+typedef union iprte_a {
+	uint64_t	entry;
+	struct {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_addr			  :	38;
+		uint64_t	i_init			  :	 3;
+		uint64_t	i_source		  :	 8;
+		uint64_t	i_rsvd			  :	 2;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} iprte_fields;
+} iprte_a_t;
+
+#endif /* _ASM_IA64_SN_SHUBIO_H */
+
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
new file mode 100644
index 000000000000..78eb4f869c8b
--- /dev/null
+++ b/include/asm-ia64/sn/simulator.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SIMULATOR_H
+#define _ASM_IA64_SN_SIMULATOR_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IA64_SGI_SN_SIM
+
+#define SNMAGIC 0xaeeeeeee8badbeefL
+#define IS_RUNNING_ON_SIMULATOR() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+
+#define SIMULATOR_SLEEP()	asm("nop.i 0x8beef")
+
+#else
+
+#define IS_RUNNING_ON_SIMULATOR()	(0)
+#define SIMULATOR_SLEEP()
+
+#endif
+
+#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
new file mode 100644
index 000000000000..b0c4d6dd77ba
--- /dev/null
+++ b/include/asm-ia64/sn/sn2/sn_hwperf.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
+ * SGI Altix node and router hardware
+ *
+ * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
+ */
+
+#ifndef SN_HWPERF_H
+#define SN_HWPERF_H
+
+/*
+ * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
+ * return an array of these. Do not change this without also
+ * changing the corresponding SAL code.
+ */
+#define SN_HWPERF_MAXSTRING		128
+struct sn_hwperf_object_info {
+	u32 id;
+	union {
+		struct {
+			u64 this_part:1;
+			u64 is_shared:1;
+		} fields;
+		struct {
+			u64 flags;
+			u64 reserved;
+		} b;
+	} f;
+	char name[SN_HWPERF_MAXSTRING];
+	char location[SN_HWPERF_MAXSTRING];
+	u32 ports;
+};
+
+#define sn_hwp_this_part	f.fields.this_part
+#define sn_hwp_is_shared	f.fields.is_shared
+#define sn_hwp_flags		f.b.flags
+
+/* macros for object classification */
+#define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
+#define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
+#define SN_HWPERF_IS_ROUTER(x)		((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
+#define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
+					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
+					(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
+
+/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
+struct sn_hwperf_port_info {
+	u32 port;
+	u32 conn_id;
+	u32 conn_port;
+};
+
+/* for HWPERF_{GET,SET}_MMRS */
+struct sn_hwperf_data {
+	u64 addr;
+	u64 data;
+};
+
+/* user ioctl() argument, see below */
+struct sn_hwperf_ioctl_args {
+        u64 arg;		/* argument, usually an object id */
+        u64 sz;                 /* size of transfer */
+        void *ptr;              /* pointer to source/target */
+        u32 v0;			/* second return value */
+};
+
+/*
+ * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
+ * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
+ * to call SAL, and whether to use an interprocessor interrupt
+ * or task migration in order to do so. If the CPU specified is
+ * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
+ */
+#define SN_HWPERF_ARG_ANY_CPU		0x7fffffffUL
+#define SN_HWPERF_ARG_CPU_MASK		0x7fffffff00000000ULL
+#define SN_HWPERF_ARG_USE_IPI_MASK	0x8000000000000000ULL
+#define SN_HWPERF_ARG_OBJID_MASK	0x00000000ffffffffULL
+
+/* 
+ * ioctl requests on the "sn_hwperf" misc device that call SAL.
+ */
+#define SN_HWPERF_OP_MEM_COPYIN		0x1000
+#define SN_HWPERF_OP_MEM_COPYOUT	0x2000
+#define SN_HWPERF_OP_MASK		0x0fff
+
+/*
+ * Determine mem requirement.
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define	SN_HWPERF_GET_HEAPSIZE		1
+
+/*
+ * Install mem for SAL drvr
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to buffer for scratch area
+ */
+#define SN_HWPERF_INSTALL_HEAP		2
+
+/*
+ * Determine number of objects
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_COUNT		(10|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Determine object "distance", relative to a cpu. This operation can
+ * execute on a designated logical cpu number, using either an IPI or
+ * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of IPI flag, cpu number and object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_DISTANCE	(11|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate objects. Special case if sz == 8, returns the required
+ * buffer size.
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_ENUM_OBJECTS		(12|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate NumaLink ports for an object. Special case if sz == 8,
+ * returns the required buffer size.
+ * arg	object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_port_info
+ */
+#define SN_HWPERF_ENUM_PORTS		(13|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * SET/GET memory mapped registers. These operations can execute
+ * on a designated logical cpu number, using either an IPI or via
+ * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of ipi flag, cpu number and object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_data
+ */
+#define SN_HWPERF_SET_MMRS		(14|SN_HWPERF_OP_MEM_COPYIN)
+#define SN_HWPERF_GET_MMRS		(15|SN_HWPERF_OP_MEM_COPYOUT| \
+					    SN_HWPERF_OP_MEM_COPYIN)
+/*
+ * Lock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_ACQUIRE		16
+
+/*
+ * Unlock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_RELEASE		17
+
+/*
+ * Break a lock on a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_FORCE_RELEASE		18
+
+/*
+ * ioctl requests on "sn_hwperf" that do not call SAL
+ */
+
+/*
+ * get cpu info as an array of hwperf_object_info_t. 
+ * id is logical CPU number, name is description, location
+ * is geoid (e.g. 001c04#1c). Special case if sz == 8,
+ * returns the required buffer size.
+ *
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_GET_CPU_INFO		(100|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given an object id, return it's node number (aka cnode).
+ * arg	object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_OBJ_NODE		(101|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node number (cnode), return it's nasid.
+ * arg	ordinal node number (aka cnodeid)
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_NODE_NASID	(102|SN_HWPERF_OP_MEM_COPYOUT)
+
+/* return codes */
+#define SN_HWPERF_OP_OK			0
+#define SN_HWPERF_OP_NOMEM		1
+#define SN_HWPERF_OP_NO_PERM		2
+#define SN_HWPERF_OP_IO_ERROR		3
+#define SN_HWPERF_OP_BUSY		4
+#define SN_HWPERF_OP_RECONFIGURE	253
+#define SN_HWPERF_OP_INVAL		254
+
+#endif				/* SN_HWPERF_H */
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
new file mode 100644
index 000000000000..685435af170d
--- /dev/null
+++ b/include/asm-ia64/sn/sn_cpuid.h
@@ -0,0 +1,144 @@
+/* 
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_SN_CPUID_H
+#define _ASM_IA64_SN_SN_CPUID_H
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/intrinsics.h>
+
+
+/*
+ * Functions for converting between cpuids, nodeids and NASIDs.
+ * 
+ * These are for SGI platforms only.
+ *
+ */
+
+
+
+
+/*
+ *  Definitions of terms (these definitions are for IA64 ONLY. Other architectures
+ *  use cpuid/cpunum quite defferently):
+ *
+ *	   CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
+ *		the cpu. The value cpuid has no significance on IA64 other than
+ *		the boot cpu is 0.
+ *			smp_processor_id() returns the cpuid of the current cpu.
+ *
+ * 	   CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
+ *		This is the same as 31:24 of the processor LID register
+ *			hard_smp_processor_id()- cpu_physical_id of current processor
+ *			cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
+ *			cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> 
+ *				* not real efficient - don't use in perf critical code
+ *
+ *         SLICE - a number in the range of 0 - 3 (typically) that represents the
+ *		cpu number on a brick.
+ *
+ *	   SUBNODE - (almost obsolete) the number of the FSB that a cpu is
+ *		connected to. This is also the same as the PI number. Usually 0 or 1.
+ *
+ *	NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no 
+ *	significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
+ *
+ *
+ * The macros convert between cpu physical ids & slice/nasid/cnodeid.
+ * These terms are described below:
+ *
+ *
+ * Brick
+ *          -----   -----           -----   -----       CPU
+ *          | 0 |   | 1 |           | 0 |   | 1 |       SLICE
+ *          -----   -----           -----   -----
+ *            |       |               |       |
+ *            |       |               |       |
+ *          0 |       | 2           0 |       | 2       FSB SLOT
+ *             -------                 -------  
+ *                |                       |
+ *                |                       |
+ *                |                       |
+ *             ------------      -------------
+ *             |          |      |           |
+ *             |    SHUB  |      |   SHUB    |        NASID   (0..MAX_NASIDS)
+ *             |          |----- |           |        CNODEID (0..num_compact_nodes-1)
+ *             |          |      |           |
+ *             |          |      |           |
+ *             ------------      -------------
+ *                   |                 |
+ *                           
+ *
+ */
+
+#ifndef CONFIG_SMP
+#define cpu_physical_id(cpuid)			((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#endif
+
+
+#define get_node_number(addr)			NASID_GET(addr)
+
+/*
+ * NOTE: on non-MP systems, only cpuid 0 exists
+ */
+
+extern short physical_node_map[];			/* indexed by nasid to get cnode */
+
+/*
+ * Macros for retrieving info about current cpu
+ */
+#define get_nasid()			(nodepda->phys_cpuid[smp_processor_id()].nasid)
+#define get_subnode()			(nodepda->phys_cpuid[smp_processor_id()].subnode)
+#define get_slice()			(nodepda->phys_cpuid[smp_processor_id()].slice)
+#define get_cnode()			(nodepda->phys_cpuid[smp_processor_id()].cnode)
+#define get_sapicid()			((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+
+/*
+ * Macros for retrieving info about an arbitrary cpu
+ *	cpuid - logical cpu id
+ */
+#define cpuid_to_nasid(cpuid)		(nodepda->phys_cpuid[cpuid].nasid)
+#define cpuid_to_subnode(cpuid)		(nodepda->phys_cpuid[cpuid].subnode)
+#define cpuid_to_slice(cpuid)		(nodepda->phys_cpuid[cpuid].slice)
+#define cpuid_to_cnodeid(cpuid)		(physical_node_map[cpuid_to_nasid(cpuid)])
+
+
+/*
+ * Dont use the following in performance critical code. They require scans
+ * of potentially large tables.
+ */
+extern int nasid_slice_to_cpuid(int, int);
+#define nasid_slice_to_cpu_physical_id(nasid, slice)			\
+	cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
+
+/*
+ * cnodeid_to_nasid - convert a cnodeid to a NASID
+ *	Macro relies on pg_data for a node being on the node itself.
+ *	Just extract the NASID from the pointer.
+ *
+ */
+#define cnodeid_to_nasid(cnodeid)	pda->cnodeid_to_nasid_table[cnodeid]
+ 
+/*
+ * nasid_to_cnodeid - convert a NASID to a cnodeid
+ */
+#define nasid_to_cnodeid(nasid)		(physical_node_map[nasid])
+
+/*
+ * partition_coherence_id - get the coherence ID of the current partition
+ */
+extern u8 sn_coherency_id;
+#define partition_coherence_id()	(sn_coherency_id)
+
+#endif /* _ASM_IA64_SN_SN_CPUID_H */
+
diff --git a/include/asm-ia64/sn/sn_fru.h b/include/asm-ia64/sn/sn_fru.h
new file mode 100644
index 000000000000..8c21ac3f0156
--- /dev/null
+++ b/include/asm-ia64/sn/sn_fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,1999-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_SN_FRU_H
+#define _ASM_IA64_SN_SN_FRU_H
+
+#define MAX_DIMMS			8	 /* max # of dimm banks */
+#define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+	confidence_t km_confidence; /* confidence level that the memory is bad
+				     * is this necessary ?
+				     */
+	confidence_t km_dimm[MAX_DIMMS];
+				    /* confidence level that dimm[i] is bad
+				     *I think this is the right number
+				     */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+	confidence_t	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+
+typedef struct kf_pci_bus_s {
+	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
+	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
+					/* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+
+#endif /* _ASM_IA64_SN_SN_FRU_H */
+
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
new file mode 100644
index 000000000000..88c31b53dc09
--- /dev/null
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -0,0 +1,1015 @@
+#ifndef _ASM_IA64_SN_SN_SAL_H
+#define _ASM_IA64_SN_SN_SAL_H
+
+/*
+ * System Abstraction Layer definitions for IA64
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+#include <linux/config.h>
+#include <asm/sal.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/shub_mmr.h>
+
+// SGI Specific Calls
+#define  SN_SAL_POD_MODE                           0x02000001
+#define  SN_SAL_SYSTEM_RESET                       0x02000002
+#define  SN_SAL_PROBE                              0x02000003
+#define  SN_SAL_GET_MASTER_NASID                   0x02000004
+#define	 SN_SAL_GET_KLCONFIG_ADDR		   0x02000005
+#define  SN_SAL_LOG_CE				   0x02000006
+#define  SN_SAL_REGISTER_CE			   0x02000007
+#define  SN_SAL_GET_PARTITION_ADDR		   0x02000009
+#define  SN_SAL_XP_ADDR_REGION			   0x0200000f
+#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL		   0x02000010
+#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL		   0x02000011
+#define  SN_SAL_PRINT_ERROR			   0x02000012
+#define  SN_SAL_SET_ERROR_HANDLING_FEATURES	   0x0200001a	// reentrant
+#define  SN_SAL_GET_FIT_COMPT			   0x0200001b	// reentrant
+#define  SN_SAL_GET_SN_INFO                        0x0200001c
+#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
+#define  SN_SAL_CONSOLE_PUTC                       0x02000021
+#define  SN_SAL_CONSOLE_GETC                       0x02000022
+#define  SN_SAL_CONSOLE_PUTS                       0x02000023
+#define  SN_SAL_CONSOLE_GETS                       0x02000024
+#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
+#define  SN_SAL_CONSOLE_POLL                       0x02000026
+#define  SN_SAL_CONSOLE_INTR                       0x02000027
+#define  SN_SAL_CONSOLE_PUTB			   0x02000028
+#define  SN_SAL_CONSOLE_XMIT_CHARS		   0x0200002a
+#define  SN_SAL_CONSOLE_READC			   0x0200002b
+#define  SN_SAL_SYSCTL_MODID_GET	           0x02000031
+#define  SN_SAL_SYSCTL_GET                         0x02000032
+#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
+#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
+#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
+#define  SN_SAL_BUS_CONFIG		   	   0x02000037
+#define  SN_SAL_SYS_SERIAL_GET			   0x02000038
+#define  SN_SAL_PARTITION_SERIAL_GET		   0x02000039
+#define  SN_SAL_SYSCTL_PARTITION_GET		   0x0200003a
+#define  SN_SAL_SYSTEM_POWER_DOWN		   0x0200003b
+#define  SN_SAL_GET_MASTER_BASEIO_NASID		   0x0200003c
+#define  SN_SAL_COHERENCE                          0x0200003d
+#define  SN_SAL_MEMPROTECT                         0x0200003e
+#define  SN_SAL_SYSCTL_FRU_CAPTURE		   0x0200003f
+
+#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP		   0x02000042	// reentrant
+#define	 SN_SAL_IROUTER_OP			   0x02000043
+#define  SN_SAL_IOIF_INTERRUPT			   0x0200004a
+#define  SN_SAL_HWPERF_OP			   0x02000050   // lock
+#define  SN_SAL_IOIF_ERROR_INTERRUPT		   0x02000051
+
+#define  SN_SAL_IOIF_SLOT_ENABLE		   0x02000053
+#define  SN_SAL_IOIF_SLOT_DISABLE		   0x02000054
+#define  SN_SAL_IOIF_GET_HUBDEV_INFO		   0x02000055
+#define  SN_SAL_IOIF_GET_PCIBUS_INFO		   0x02000056
+#define  SN_SAL_IOIF_GET_PCIDEV_INFO		   0x02000057
+#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST	   0x02000058
+
+#define SN_SAL_HUB_ERROR_INTERRUPT		   0x02000060
+
+
+/*
+ * Service-specific constants
+ */
+
+/* Console interrupt manipulation */
+	/* action codes */
+#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
+#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
+#define SAL_CONSOLE_INTR_STATUS 2	/* retrieve the interrupt status */
+	/* interrupt specification & status return codes */
+#define SAL_CONSOLE_INTR_XMIT	1	/* output interrupt */
+#define SAL_CONSOLE_INTR_RECV	2	/* input interrupt */
+
+/* interrupt handling */
+#define SAL_INTR_ALLOC		1
+#define SAL_INTR_FREE		2
+
+/*
+ * IRouter (i.e. generalized system controller) operations
+ */
+#define SAL_IROUTER_OPEN	0	/* open a subchannel */
+#define SAL_IROUTER_CLOSE	1	/* close a subchannel */
+#define SAL_IROUTER_SEND	2	/* send part of an IRouter packet */
+#define SAL_IROUTER_RECV	3	/* receive part of an IRouter packet */
+#define SAL_IROUTER_INTR_STATUS	4	/* check the interrupt status for
+					 * an open subchannel
+					 */
+#define SAL_IROUTER_INTR_ON	5	/* enable an interrupt */
+#define SAL_IROUTER_INTR_OFF	6	/* disable an interrupt */
+#define SAL_IROUTER_INIT	7	/* initialize IRouter driver */
+
+/* IRouter interrupt mask bits */
+#define SAL_IROUTER_INTR_XMIT	SAL_CONSOLE_INTR_XMIT
+#define SAL_IROUTER_INTR_RECV	SAL_CONSOLE_INTR_RECV
+
+
+/*
+ * SAL Error Codes
+ */
+#define SALRET_MORE_PASSES	1
+#define SALRET_OK		0
+#define SALRET_NOT_IMPLEMENTED	(-1)
+#define SALRET_INVALID_ARG	(-2)
+#define SALRET_ERROR		(-3)
+
+
+/**
+ * sn_sal_rev_major - get the major SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the major value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_major(void)
+{
+	struct ia64_sal_systab *systab = efi.sal_systab;
+
+	return (int)systab->sal_b_rev_major;
+}
+
+/**
+ * sn_sal_rev_minor - get the minor SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the minor value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_minor(void)
+{
+	struct ia64_sal_systab *systab = efi.sal_systab;
+	
+	return (int)systab->sal_b_rev_minor;
+}
+
+/*
+ * Specify the minimum PROM revsion required for this kernel.
+ * Note that they're stored in hex format...
+ */
+#define SN_SAL_MIN_MAJOR	0x4  /* SN2 kernels need at least PROM 4.0 */
+#define SN_SAL_MIN_MINOR	0x0
+
+/*
+ * Returns the master console nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_console_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master console nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Returns the master baseio nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_master_baseio_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master baseio nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+static inline char *
+ia64_sn_get_klconfig_addr(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	int cnodeid;
+
+	cnodeid = nasid_to_cnodeid(nasid);
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
+
+	/*
+	 * We should panic if a valid cnode nasid does not produce
+	 * a klconfig address.
+	 */
+	if (ret_stuff.status != 0) {
+		panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
+	}
+	return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
+}
+
+/*
+ * Returns the next console character.
+ */
+static inline u64
+ia64_sn_console_getc(int *ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	*ch = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Read a character from the SAL console device, after a previous interrupt
+ * or poll operation has given us to know that a character is available
+ * to be read.
+ */
+static inline u64
+ia64_sn_console_readc(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Sends the given character to the console.
+ */
+static inline u64
+ia64_sn_console_putc(char ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (uint64_t)ch, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Sends the given buffer to the console.
+ */
+static inline u64
+ia64_sn_console_putb(const char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0; 
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (uint64_t)buf, (uint64_t)len, 0, 0, 0, 0, 0);
+
+	if ( ret_stuff.status == 0 ) {
+		return ret_stuff.v0;
+	}
+	return (u64)0;
+}
+
+/*
+ * Print a platform error record
+ */
+static inline u64
+ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (uint64_t)hook, (uint64_t)rec, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Check for Platform errors
+ */
+static inline u64
+ia64_sn_plat_cpei_handler(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks for console input.
+ */
+static inline u64
+ia64_sn_console_check(int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks console interrupt status
+ */
+static inline u64
+ia64_sn_console_intr_status(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 0, SAL_CONSOLE_INTR_STATUS,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+	
+	return 0;
+}
+
+/*
+ * Enable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_enable(uint64_t intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_ON,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Disable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_disable(uint64_t intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_OFF,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Sends a character buffer to the console asynchronously.
+ */
+static inline u64
+ia64_sn_console_xmit_chars(char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
+		 (uint64_t)buf, (uint64_t)len,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+
+	return 0;
+}
+
+/*
+ * Returns the iobrick module Id
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/**
+ * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
+ *
+ * SN_SAL_POD_MODE actually takes an argument, but it's always
+ * 0 when we call it from the kernel, so we don't have to expose
+ * it to the caller.
+ */
+static inline u64
+ia64_sn_pod_mode(void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/**
+ * ia64_sn_probe_mem - read from memory safely
+ * @addr: address to probe
+ * @size: number bytes to read (1,2,4,8)
+ * @data_ptr: address to store value read by probe (-1 returned if probe fails)
+ *
+ * Call into the SAL to do a memory read.  If the read generates a machine
+ * check, this routine will recover gracefully and return -1 to the caller.
+ * @addr is usually a kernel virtual address in uncached space (i.e. the
+ * address starts with 0xc), but if called in physical mode, @addr should
+ * be a physical address.
+ *
+ * Return values:
+ *  0 - probe successful
+ *  1 - probe failed (generated MCA)
+ *  2 - Bad arg
+ * <0 - PAL error
+ */
+static inline u64
+ia64_sn_probe_mem(long addr, long size, void *data_ptr)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
+
+	if (data_ptr) {
+		switch (size) {
+		case 1:
+			*((u8*)data_ptr) = (u8)isrv.v0;
+			break;
+		case 2:
+			*((u16*)data_ptr) = (u16)isrv.v0;
+			break;
+		case 4:
+			*((u32*)data_ptr) = (u32)isrv.v0;
+			break;
+		case 8:
+			*((u64*)data_ptr) = (u64)isrv.v0;
+			break;
+		default:
+			isrv.status = 2;
+		}
+	}
+	return isrv.status;
+}
+
+/*
+ * Retrieve the system serial number as an ASCII string.
+ */
+static inline u64
+ia64_sn_sys_serial_get(char *buf)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+extern char sn_system_serial_number_string[];
+extern u64 sn_partition_serial_number;
+
+static inline char *
+sn_system_serial_number(void) {
+	if (sn_system_serial_number_string[0]) {
+		return(sn_system_serial_number_string);
+	} else {
+		ia64_sn_sys_serial_get(sn_system_serial_number_string);
+		return(sn_system_serial_number_string);
+	}
+}
+	
+
+/*
+ * Returns a unique id number for this system and partition (suitable for
+ * use with license managers), based in part on the system serial number.
+ */
+static inline u64
+ia64_sn_partition_serial_get(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, 0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return 0;
+	return ret_stuff.v0;
+}
+
+static inline u64
+sn_partition_serial_number_val(void) {
+	if (sn_partition_serial_number) {
+		return(sn_partition_serial_number);
+	} else {
+		return(sn_partition_serial_number = ia64_sn_partition_serial_get());
+	}
+}
+
+/*
+ * Returns the partition id of the nasid passed in as an argument,
+ * or INVALID_PARTID if the partition id cannot be retrieved.
+ */
+static inline partid_t
+ia64_sn_sysctl_partition_get(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
+		 0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return INVALID_PARTID;
+	return ((partid_t)ret_stuff.v0);
+}
+
+/*
+ * Returns the partition id of the current processor.
+ */
+
+extern partid_t sn_partid;
+
+static inline partid_t
+sn_local_partid(void) {
+	if (sn_partid < 0) {
+		return (sn_partid = ia64_sn_sysctl_partition_get(cpuid_to_nasid(smp_processor_id())));
+	} else {
+		return sn_partid;
+	}
+}
+
+/*
+ * Register or unregister a physical address range being referenced across
+ * a partition boundary for which certain SAL errors should be scanned for,
+ * cleaned up and ignored.  This is of value for kernel partitioning code only.
+ * Values for the operation argument:
+ *	1 = register this address range with SAL
+ *	0 = unregister this address range with SAL
+ * 
+ * SAL maintains a reference count on an address range in case it is registered
+ * multiple times.
+ * 
+ * On success, returns the reference count of the address range after the SAL
+ * call has performed the current registration/unregistration.  Returns a
+ * negative value if an error occurred.
+ */
+static inline int
+sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, (u64)operation,
+		 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister an instruction range for which SAL errors should
+ * be ignored.  If an error occurs while in the registered range, SAL jumps
+ * to return_addr after ignoring the error.  Values for the operation argument:
+ *	1 = register this instruction range with SAL
+ *	0 = unregister this instruction range with SAL
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
+			 int virtual, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	u64 call;
+	if (virtual) {
+		call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
+	} else {
+		call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
+	}
+	SAL_CALL(ret_stuff, call, start_addr, end_addr, return_addr, (u64)1,
+		 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change or query the coherence domain for this partition. Each cpu-based
+ * nasid is represented by a bit in an array of 64-bit words:
+ *      0 = not in this partition's coherency domain
+ *      1 = in this partition's coherency domain
+ *
+ * It is not possible for the local system's nasids to be removed from
+ * the coherency domain.  Purpose of the domain arguments:
+ *      new_domain = set the coherence domain to the given nasids
+ *      old_domain = return the current coherence domain
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_change_coherence(u64 *new_domain, u64 *old_domain)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_COHERENCE, new_domain, old_domain, 0, 0,
+		 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change memory access protections for a physical address range.
+ * nasid_array is not used on Altix, but may be in future architectures.
+ * Available memory protection access classes are defined after the function.
+ */
+static inline int
+sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
+{
+	struct ia64_sal_retval ret_stuff;
+	int cnodeid;
+	unsigned long irq_flags;
+
+	cnodeid = nasid_to_cnodeid(get_node_number(paddr));
+	// spin_lock(&NODEPDA(cnodeid)->bist_lock);
+	local_irq_save(irq_flags);
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_MEMPROTECT, paddr, len, nasid_array,
+		 perms, 0, 0, 0);
+	local_irq_restore(irq_flags);
+	// spin_unlock(&NODEPDA(cnodeid)->bist_lock);
+	return ret_stuff.status;
+}
+#define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
+#define SN_MEMPROT_ACCESS_CLASS_1		0x2520c2
+#define SN_MEMPROT_ACCESS_CLASS_2		0x14a1ca
+#define SN_MEMPROT_ACCESS_CLASS_3		0x14a290
+#define SN_MEMPROT_ACCESS_CLASS_6		0x084080
+#define SN_MEMPROT_ACCESS_CLASS_7		0x021080
+
+/*
+ * Turns off system power.
+ */
+static inline void
+ia64_sn_power_down(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
+	while(1);
+	/* never returns */
+}
+
+/**
+ * ia64_sn_fru_capture - tell the system controller to capture hw state
+ *
+ * This routine will call the SAL which will tell the system controller(s)
+ * to capture hw mmr information from each SHub in the system.
+ */
+static inline u64
+ia64_sn_fru_capture(void)
+{
+        struct ia64_sal_retval isrv;
+        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
+        if (isrv.status)
+                return 0;
+        return isrv.v0;
+}
+
+/*
+ * Performs an operation on a PCI bus or slot -- power up, power down
+ * or reset.
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
+			      u64 bus, char slot, 
+			      u64 action)
+{
+	struct ia64_sal_retval rv = {0, 0, 0, 0};
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
+		 bus, (u64) slot, 0, 0);
+	if (rv.status)
+	    	return rv.v0;
+	return 0;
+}
+
+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'.  Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+			   0, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'.  The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'.  The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call.  The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'.  The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written.  The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'.  The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ *	%SALRET_OK if ok
+ *	%SALRET_INVALID_ARG if index too big
+ *	%SALRET_NOT_IMPLEMENTED if running on older PROM
+ *	??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+		      u64 banlen)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+			banbuf, banlen, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened.  "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+			   (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ *  In:
+ *	arg0 - SN_SAL_GET_SAPIC_INFO
+ *	arg1 - sapicid (lid >> 16) 
+ *  Out:
+ *	v0 - nasid
+ *	v1 - subnode
+ *	v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		if (nasid) *nasid = sapicid & 0xfff;
+		if (subnode) *subnode = (sapicid >> 13) & 1;
+		if (slice) *slice = (sapicid >> 12) & 3;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (nasid) *nasid = (int) ret_stuff.v0;
+	if (subnode) *subnode = (int) ret_stuff.v1;
+	if (slice) *slice = (int) ret_stuff.v2;
+	return 0;
+}
+ 
+/*
+ * Returns information about the HUB/SHUB.
+ *  In:
+ *	arg0 - SN_SAL_GET_SN_INFO
+ * 	arg1 - 0 (other values reserved for future use)
+ *  Out:
+ *	v0 
+ *		[7:0]   - shub type (0=shub1, 1=shub2)
+ *		[15:8]  - Log2 max number of nodes in entire system (includes
+ *			  C-bricks, I-bricks, etc)
+ *		[23:16] - Log2 of nodes per sharing domain			 
+ * 		[31:24] - partition ID
+ * 		[39:32] - coherency_id
+ * 		[47:40] - regionsize
+ *	v1 
+ *		[15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
+ *	 	[23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
+		u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		int nasid = get_sapicid() & 0xfff;;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL                                               
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48                                                               
+		if (shubtype) *shubtype = 0;
+		if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+		if (nasid_shift) *nasid_shift = 38;
+		if (systemsize) *systemsize = 11;
+		if (sharing_domain_size) *sharing_domain_size = 9;
+		if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+		if (coher) *coher = nasid >> 9;
+		if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+			SH_SHUB_ID_NODES_PER_BIT_SHFT;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+	if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+	if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+	if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+	if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+	if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+	if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+	if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+	return 0;
+}
+ 
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * include/asm-ia64/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+                  u64 a3, u64 a4, int *v0)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+		opcode, a0, a1, a2, a3, a4);
+	if (v0)
+		*v0 = (int) rv.v0;
+	return (int) rv.status;
+}
+
+#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/sn/sndrv.h b/include/asm-ia64/sn/sndrv.h
new file mode 100644
index 000000000000..aa00d42cde32
--- /dev/null
+++ b/include/asm-ia64/sn/sndrv.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2002-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SNDRV_H
+#define _ASM_IA64_SN_SNDRV_H
+
+/* ioctl commands */
+#define SNDRV_GET_ROUTERINFO		1
+#define SNDRV_GET_INFOSIZE		2
+#define SNDRV_GET_HUBINFO		3
+#define SNDRV_GET_FLASHLOGSIZE		4
+#define SNDRV_SET_FLASHSYNC		5
+#define SNDRV_GET_FLASHLOGDATA		6
+#define SNDRV_GET_FLASHLOGALL		7
+
+#define SNDRV_SET_HISTOGRAM_TYPE	14
+
+#define SNDRV_ELSC_COMMAND		19
+#define	SNDRV_CLEAR_LOG			20
+#define	SNDRV_INIT_LOG			21
+#define	SNDRV_GET_PIMM_PSC		22
+#define SNDRV_SET_PARTITION		23
+#define SNDRV_GET_PARTITION		24
+
+/* see synergy_perf_ioctl() */
+#define SNDRV_GET_SYNERGY_VERSION	30
+#define SNDRV_GET_SYNERGY_STATUS	31
+#define SNDRV_GET_SYNERGYINFO		32
+#define SNDRV_SYNERGY_APPEND		33
+#define SNDRV_SYNERGY_ENABLE		34
+#define SNDRV_SYNERGY_FREQ		35
+
+/* Devices */
+#define SNDRV_UKNOWN_DEVICE		-1
+#define SNDRV_ROUTER_DEVICE		1
+#define SNDRV_HUB_DEVICE		2
+#define SNDRV_ELSC_NVRAM_DEVICE		3
+#define SNDRV_ELSC_CONTROLLER_DEVICE	4
+#define SNDRV_SYSCTL_SUBCH		5
+#define SNDRV_SYNERGY_DEVICE		6
+
+#endif /* _ASM_IA64_SN_SNDRV_H */
diff --git a/include/asm-ia64/sn/types.h b/include/asm-ia64/sn/types.h
new file mode 100644
index 000000000000..586ed47cae9c
--- /dev/null
+++ b/include/asm-ia64/sn/types.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_TYPES_H
+#define _ASM_IA64_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef unsigned int    moduleid_t;     /* user-visible module number type */
+typedef unsigned int    cmoduleid_t;    /* kernel compact module id type */
+typedef signed char     slabid_t;
+typedef u64 nic_t;
+typedef unsigned long iopaddr_t;
+typedef unsigned long paddr_t;
+typedef short cnodeid_t;
+
+#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/include/asm-ia64/socket.h b/include/asm-ia64/socket.h
new file mode 100644
index 000000000000..21a9f10d6baa
--- /dev/null
+++ b/include/asm-ia64/socket.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_IA64_SOCKET_H
+#define _ASM_IA64_SOCKET_H
+
+/*
+ * Socket related defines.
+ *
+ * Based on <asm-i386/socket.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_IA64_SOCKET_H */
diff --git a/include/asm-ia64/sockios.h b/include/asm-ia64/sockios.h
new file mode 100644
index 000000000000..cf94857c8a54
--- /dev/null
+++ b/include/asm-ia64/sockios.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_IA64_SOCKIOS_H
+#define _ASM_IA64_SOCKIOS_H
+
+/*
+ * Socket-level I/O control calls.
+ *
+ * Based on <asm-i386/sockios.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/include/asm-ia64/spinlock.h b/include/asm-ia64/spinlock.h
new file mode 100644
index 000000000000..909936f25512
--- /dev/null
+++ b/include/asm-ia64/spinlock.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_IA64_SPINLOCK_H
+#define _ASM_IA64_SPINLOCK_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *
+ * This file is used for SMP configurations only.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED			(spinlock_t) { 0 }
+#define spin_lock_init(x)			((x)->lock = 0)
+
+#ifdef ASM_SUPPORTED
+/*
+ * Try to get the lock.  If we fail to get the lock, make a non-standard call to
+ * ia64_spinlock_contention().  We do not use a normal call because that would force all
+ * callers of spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
+ * carefully coded to touch only those registers that spin_lock() marks "clobbered".
+ */
+
+#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+
+static inline void
+_raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
+{
+	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+
+#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) br.cond.spnt.many b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#else
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	/* mis-declare, so we get the entry-point, not it's function descriptor: */
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "(p14) br.call.spnt.many b6 = b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#endif
+}
+#define _raw_spin_lock(lock) _raw_spin_lock_flags(lock, 0)
+#else /* !ASM_SUPPORTED */
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+# define _raw_spin_lock(x)								\
+do {											\
+	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
+	__u64 ia64_spinlock_val;							\
+	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
+	if (unlikely(ia64_spinlock_val)) {						\
+		do {									\
+			while (*ia64_spinlock_ptr)					\
+				ia64_barrier();						\
+			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
+		} while (ia64_spinlock_val);						\
+	}										\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+#define spin_is_locked(x)	((x)->lock != 0)
+#define _raw_spin_unlock(x)	do { barrier(); ((spinlock_t *) x)->lock = 0; } while (0)
+#define _raw_spin_trylock(x)	(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
+#define spin_unlock_wait(x)	do { barrier(); } while ((x)->lock)
+
+typedef struct {
+	volatile unsigned int read_counter	: 31;
+	volatile unsigned int write_lock	:  1;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }
+
+#define rwlock_init(x)		do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+#define read_can_lock(rw)	(*(volatile int *)(rw) >= 0)
+#define write_can_lock(rw)	(*(volatile int *)(rw) == 0)
+
+#define _raw_read_lock(rw)								\
+do {											\
+	rwlock_t *__read_lock_ptr = (rw);						\
+											\
+	while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) {		\
+		ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);			\
+		while (*(volatile int *)__read_lock_ptr < 0)				\
+			cpu_relax();							\
+	}										\
+} while (0)
+
+#define _raw_read_unlock(rw)					\
+do {								\
+	rwlock_t *__read_lock_ptr = (rw);			\
+	ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);	\
+} while (0)
+
+#ifdef ASM_SUPPORTED
+#define _raw_write_lock(rw)							\
+do {										\
+ 	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"1:\n"								\
+		"ld4 r2 = [%0];;\n"						\
+		"cmp4.eq p0,p7 = r0,r2\n"					\
+		"(p7) br.cond.spnt.few 1b \n"					\
+		"cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n"			\
+		"cmp4.eq p0,p7 = r0, r2\n"					\
+		"(p7) br.cond.spnt.few 1b;;\n"					\
+		:: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory");		\
+} while(0)
+
+#define _raw_write_trylock(rw)							\
+({										\
+	register long result;							\
+										\
+	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"cmpxchg4.acq %0 = [%1], r29, ar.ccv\n"				\
+		: "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory");		\
+	(result == 0);								\
+})
+
+#else /* !ASM_SUPPORTED */
+
+#define _raw_write_lock(l)								\
+({											\
+	__u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1);			\
+	__u32 *ia64_write_lock_ptr = (__u32 *) (l);					\
+	do {										\
+		while (*ia64_write_lock_ptr)						\
+			ia64_barrier();							\
+		ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0);	\
+	} while (ia64_val);								\
+})
+
+#define _raw_write_trylock(rw)						\
+({									\
+	__u64 ia64_val;							\
+	__u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1);			\
+	ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0);	\
+	(ia64_val == 0);						\
+})
+
+#endif /* !ASM_SUPPORTED */
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+#define _raw_write_unlock(x)								\
+({											\
+	smp_mb__before_clear_bit();	/* need barrier before releasing lock... */	\
+	clear_bit(31, (x));								\
+})
+
+#endif /*  _ASM_IA64_SPINLOCK_H */
diff --git a/include/asm-ia64/stat.h b/include/asm-ia64/stat.h
new file mode 100644
index 000000000000..367bb90cdffa
--- /dev/null
+++ b/include/asm-ia64/stat.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_STAT_H
+#define _ASM_IA64_STAT_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	st_blksize;
+	long		st_blocks;
+	unsigned long	__unused[3];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct ia64_oldstat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	unsigned int	__pad1;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_IA64_STAT_H */
diff --git a/include/asm-ia64/statfs.h b/include/asm-ia64/statfs.h
new file mode 100644
index 000000000000..811097974f31
--- /dev/null
+++ b/include/asm-ia64/statfs.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IA64_STATFS_H
+#define _ASM_IA64_STATFS_H
+
+/*
+ * Based on <asm-i386/statfs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__((packed));
+
+#endif /* _ASM_IA64_STATFS_H */
diff --git a/include/asm-ia64/string.h b/include/asm-ia64/string.h
new file mode 100644
index 000000000000..43502d3b57e5
--- /dev/null
+++ b/include/asm-ia64/string.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_STRING_H
+#define _ASM_IA64_STRING_H
+
+/*
+ * Here is where we want to put optimized versions of the string
+ * routines.
+ *
+ * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>	/* remove this once we remove the A-step workaround... */
+
+#define __HAVE_ARCH_STRLEN	1 /* see arch/ia64/lib/strlen.S */
+#define __HAVE_ARCH_MEMSET	1 /* see arch/ia64/lib/memset.S */
+#define __HAVE_ARCH_MEMCPY	1 /* see arch/ia64/lib/memcpy.S */
+
+extern __kernel_size_t strlen (const char *);
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+
+#endif /* _ASM_IA64_STRING_H */
diff --git a/include/asm-ia64/suspend.h b/include/asm-ia64/suspend.h
new file mode 100644
index 000000000000..b05bbb6074e2
--- /dev/null
+++ b/include/asm-ia64/suspend.h
@@ -0,0 +1 @@
+/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
new file mode 100644
index 000000000000..6f516e76d1f0
--- /dev/null
+++ b/include/asm-ia64/system.h
@@ -0,0 +1,295 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.  This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+#include <linux/config.h>
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR		__IA64_UL_CONST(0xa000000000000000)
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START		 __IA64_UL_CONST(0xa000000100000000)
+#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct pci_vector_struct {
+	__u16 segment;	/* PCI Segment number */
+	__u16 bus;	/* PCI Bus number */
+	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+	__u32 irq;	/* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+	__u64 command_line;		/* physical address of command line arguments */
+	__u64 efi_systab;		/* physical address of EFI system table */
+	__u64 efi_memmap;		/* physical address of EFI memory map */
+	__u64 efi_memmap_size;		/* size of EFI memory map */
+	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
+	__u32 efi_memdesc_version;	/* memory descriptor version */
+	struct {
+		__u16 num_cols;	/* number of columns on console output device */
+		__u16 num_rows;	/* number of rows on console output device */
+		__u16 orig_x;	/* cursor's x position */
+		__u16 orig_y;	/* cursor's y position */
+	} console_info;
+	__u64 fpswa;		/* physical address of the fpswa interface */
+	__u64 initrd_start;
+	__u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering.  In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ *   wmb():	Guarantees that all preceding stores to memory-
+ *		like regions are visible before any subsequent
+ *		stores and that all following stores will be
+ *		visible only after all previous stores.
+ *   rmb():	Like wmb(), but for reads.
+ *   mb():	wmb()/rmb() combo, i.e., all previous memory
+ *		accesses are visible before all subsequent
+ *		accesses and vice versa.  This is also known as
+ *		a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers.  For that, mf.a needs to
+ * be used.  However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb()	ia64_mf()
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb()	mb()
+# define smp_rmb()	rmb()
+# define smp_wmb()	wmb()
+# define smp_read_barrier_depends()	read_barrier_depends()
+#else
+# define smp_mb()	barrier()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+# define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+/*
+ * XXX check on these---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet.  Grrr...
+ */
+#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
+#define set_wmb(var, value)	do { (var) = (value); mb(); } while (0)
+
+#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ *   write a floating-point register right before reading the PSR
+ *   and that writes to PSR.mfl
+ */
+#define __local_irq_save(x)			\
+do {						\
+	ia64_stop();				\
+	(x) = ia64_getreg(_IA64_REG_PSR);	\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_disable()			\
+do {						\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+  extern unsigned long last_cli_ip;
+
+# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x)					\
+do {								\
+	unsigned long psr;					\
+								\
+	__local_irq_save(psr);					\
+	if (psr & IA64_PSR_I)					\
+		__save_ip();					\
+	(x) = psr;						\
+} while (0)
+
+# define local_irq_disable()	do { unsigned long x; local_irq_save(x); } while (0)
+
+# define local_irq_restore(x)					\
+do {								\
+	unsigned long old_psr, psr = (x);			\
+								\
+	local_save_flags(old_psr);				\
+	__local_irq_restore(psr);				\
+	if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I))	\
+		__save_ip();					\
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x)	__local_irq_save(x)
+# define local_irq_disable()	__local_irq_disable()
+# define local_irq_restore(x)	__local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags)	({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
+
+#define irqs_disabled()				\
+({						\
+	unsigned long __ia64_id_flags;		\
+	local_save_flags(__ia64_id_flags);	\
+	(__ia64_id_flags & IA64_PSR_I) == 0;	\
+})
+
+#ifdef __KERNEL__
+
+#define prepare_to_switch()    do { } while(0)
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs)		0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another.  If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_PERFMON
+  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t)							\
+	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
+	 || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do {							 \
+	if (IA64_HAS_EXTRA_STATE(prev))								 \
+		ia64_save_extra(prev);								 \
+	if (IA64_HAS_EXTRA_STATE(next))								 \
+		ia64_load_extra(next);								 \
+	ia64_psr(ia64_task_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
+	(last) = ia64_switch_to((next));							 \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.  In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do {						\
+	if (ia64_psr(ia64_task_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
+		ia64_psr(ia64_task_regs(prev))->mfh = 0;			\
+		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
+		__ia64_save_fpu((prev)->thread.fph);				\
+	}									\
+	__switch_to(prev, next, last);						\
+} while (0)
+#else
+# define switch_to(prev,next,last)	__switch_to(prev, next, last)
+#endif
+
+/*
+ * On IA-64, we don't want to hold the runqueue's lock during the low-level context-switch,
+ * because that could cause a deadlock.  Here is an example by Erich Focht:
+ *
+ * Example:
+ * CPU#0:
+ * schedule()
+ *    -> spin_lock_irq(&rq->lock)
+ *    -> context_switch()
+ *       -> wrap_mmu_context()
+ *          -> read_lock(&tasklist_lock)
+ *
+ * CPU#1:
+ * sys_wait4() or release_task() or forget_original_parent()
+ *    -> write_lock(&tasklist_lock)
+ *    -> do_notify_parent()
+ *       -> wake_up_parent()
+ *          -> try_to_wake_up()
+ *             -> spin_lock_irq(&parent_rq->lock)
+ *
+ * If the parent's rq happens to be on CPU#0, we'll wait for the rq->lock
+ * of that CPU which will not be released, because there we wait for the
+ * tasklist_lock to become available.
+ */
+#define prepare_arch_switch(rq, next)		\
+do {						\
+	spin_lock(&(next)->switch_lock);	\
+	spin_unlock(&(rq)->lock);		\
+} while (0)
+#define finish_arch_switch(rq, prev)	spin_unlock_irq(&(prev)->switch_lock)
+#define task_running(rq, p) 		((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h
new file mode 100644
index 000000000000..b9e843f7dc42
--- /dev/null
+++ b/include/asm-ia64/termbits.h
@@ -0,0 +1,182 @@
+#ifndef _ASM_IA64_TERMBITS_H
+#define _ASM_IA64_TERMBITS_H
+
+/*
+ * Based on <asm-i386/termbits.h>.
+ *
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added new baudrates
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/include/asm-ia64/termios.h b/include/asm-ia64/termios.h
new file mode 100644
index 000000000000..42c95693240c
--- /dev/null
+++ b/include/asm-ia64/termios.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
+
+/*
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added N_IRDA and N_SMSBLOCK
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS msgs */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+# ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {	\
+	unsigned short __tmp;				\
+	get_user(__tmp,&(termio)->x);			\
+	*(unsigned short *) &(termios)->x = __tmp;	\
+}
+
+#define user_termio_to_kernel_termios(termios, termio)		\
+({								\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);		\
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC);	\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios)		\
+({								\
+	put_user((termios)->c_iflag, &(termio)->c_iflag);	\
+	put_user((termios)->c_oflag, &(termio)->c_oflag);	\
+	put_user((termios)->c_cflag, &(termio)->c_cflag);	\
+	put_user((termios)->c_lflag, &(termio)->c_lflag);	\
+	put_user((termios)->c_line,  &(termio)->c_line);	\
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);	\
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+# endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
new file mode 100644
index 000000000000..8d5b7e77028c
--- /dev/null
+++ b/include/asm-ia64/thread_info.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#include <asm/offsets.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 flags;			/* thread_info flags (see TIF_*) */
+	__u32 cpu;			/* current CPU */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	__s32 preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+	struct {
+		int signo;
+		int code;
+		void __user *addr;
+		unsigned long start_time;
+		pid_t pid;
+	} sigdelayed;			/* Saved information for TIF_SIGDELAYED */
+};
+
+#define THREAD_SIZE			KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 0,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define free_thread_info(ti)	/* nothing */
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct()	((task_t *)__get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ *   in top 16 bits
+ */
+#define TIF_NOTIFY_RESUME	0	/* resumption notification requested */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SYSCALL_TRACE	3	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_SIGDELAYED		5	/* signal delayed from MCA/INIT/NMI/PMI context */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SIGDELAYED	(1 << TIF_SIGDELAYED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK	(_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SIGDELAYED)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/timex.h b/include/asm-ia64/timex.h
new file mode 100644
index 000000000000..414aae060440
--- /dev/null
+++ b/include/asm-ia64/timex.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_IA64_TIMEX_H
+#define _ASM_IA64_TIMEX_H
+
+/*
+ * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
+ *			Also removed cacheflush_time as it's entirely unused.
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+typedef unsigned long cycles_t;
+
+/*
+ * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
+ * local_cpu_data->itc_rate.  Fortunately, we don't have to, either: according to George
+ * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock.  The time
+ * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
+ * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
+ * the actual value is calculated and used to update the wall clock each jiffie.  Setting
+ * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors.  Hence we
+ * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
+ * 100MHz.
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+
+static inline cycles_t
+get_cycles (void)
+{
+	cycles_t ret;
+
+	ret = ia64_getreg(_IA64_REG_AR_ITC);
+	return ret;
+}
+
+#endif /* _ASM_IA64_TIMEX_H */
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
new file mode 100644
index 000000000000..3a9a6d1be75c
--- /dev/null
+++ b/include/asm-ia64/tlb.h
@@ -0,0 +1,245 @@
+#ifndef _ASM_IA64_TLB_H
+#define _ASM_IA64_TLB_H
+/*
+ * Based on <asm-generic/tlb.h>.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * Removing a translation from a page table (including TLB-shootdown) is a four-step
+ * procedure:
+ *
+ *	(1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
+ *	    (this is a no-op on ia64).
+ *	(2) Clear the relevant portions of the page-table
+ *	(3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
+ *	(4) Release the pages that were freed up in step (2).
+ *
+ * Note that the ordering of these steps is crucial to avoid races on MP machines.
+ *
+ * The Linux kernel defines several platform-specific hooks for TLB-shootdown.  When
+ * unmapping a portion of the virtual address space, these hooks are called according to
+ * the following template:
+ *
+ *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	{
+ *	  for each vma that needs a shootdown do {
+ *	    tlb_start_vma(tlb, vma);
+ *	      for each page-table-entry PTE that needs to be removed do {
+ *		tlb_remove_tlb_entry(tlb, pte, address);
+ *		if (pte refers to a normal page) {
+ *		  tlb_remove_page(tlb, page);
+ *		}
+ *	      }
+ *	    tlb_end_vma(tlb, vma);
+ *	  }
+ *	}
+ *	tlb_finish_mmu(tlb, start, end);	// finish unmap for address space MM
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SMP
+# define FREE_PTE_NR		2048
+# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
+#else
+# define FREE_PTE_NR		0
+# define tlb_fast_mode(tlb)	(1)
+#endif
+
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		nr;		/* == ~0U => fast mode */
+	unsigned char		fullmm;		/* non-zero means full mm flush */
+	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		freed;		/* number of pages freed */
+	unsigned long		start_addr;
+	unsigned long		end_addr;
+	struct page 		*pages[FREE_PTE_NR];
+};
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned int nr;
+
+	if (!tlb->need_flush)
+		return;
+	tlb->need_flush = 0;
+
+	if (tlb->fullmm) {
+		/*
+		 * Tearing down the entire address space.  This happens both as a result
+		 * of exit() and execve().  The latter case necessitates the call to
+		 * flush_tlb_mm() here.
+		 */
+		flush_tlb_mm(tlb->mm);
+	} else if (unlikely (end - start >= 1024*1024*1024*1024UL
+			     || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
+	{
+		/*
+		 * If we flush more than a tera-byte or across regions, we're probably
+		 * better off just flushing the entire TLB(s).  This should be very rare
+		 * and is not worth optimizing for.
+		 */
+		flush_tlb_all();
+	} else {
+		/*
+		 * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
+		 * vma pointer.
+		 */
+		struct vm_area_struct vma;
+
+		vma.vm_mm = tlb->mm;
+		/* flush the address range from the tlb: */
+		flush_tlb_range(&vma, start, end);
+		/* now flush the virt. page-table area mapping the address range: */
+		flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
+	}
+
+	/* lastly, release the freed pages */
+	nr = tlb->nr;
+	if (!tlb_fast_mode(tlb)) {
+		unsigned long i;
+		tlb->nr = 0;
+		tlb->start_addr = ~0UL;
+		for (i = 0; i < nr; ++i)
+			free_page_and_swap_cache(tlb->pages[i]);
+	}
+}
+
+/*
+ * Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &__get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	/*
+	 * Use fast mode if only 1 CPU is online.
+	 *
+	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
+	 * doesn't work because of speculative accesses and software prefetching: the page
+	 * table of "mm" may (and usually is) the currently active page table and even
+	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
+	 * compiler might use speculation or lfetch.fault on what happens to be a valid
+	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
+	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
+	 * problems.  (We could make fast-mode work by switching the current task to a
+	 * different "mm" during the shootdown.) --davidm 08/02/2002
+	 */
+	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+	tlb->fullmm = full_mm_flush;
+	tlb->freed = 0;
+	tlb->start_addr = ~0UL;
+	return tlb;
+}
+
+/*
+ * Called at the end of the shootdown operation to free up any resources that were
+ * collected.  The page table lock is still held at this point.
+ */
+static inline void
+tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned long freed = tlb->freed;
+	struct mm_struct *mm = tlb->mm;
+	unsigned long rss = get_mm_counter(mm, rss);
+
+	if (rss < freed)
+		freed = rss;
+	add_mm_counter(mm, rss, -freed);
+	/*
+	 * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
+	 * tlb->end_addr.
+	 */
+	ia64_tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+     return tlb->fullmm;
+}
+
+/*
+ * Logically, this routine frees PAGE.  On MP machines, the actual freeing of the page
+ * must be delayed until after the TLB has been flushed (see comments at the beginning of
+ * this file).
+ */
+static inline void
+tlb_remove_page (struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	tlb->pages[tlb->nr++] = page;
+	if (tlb->nr >= FREE_PTE_NR)
+		ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+/*
+ * Remove TLB entry for PTE mapped at virtual address ADDRESS.  This is called for any
+ * PTE, not just those pointing to (normal) physical memory.
+ */
+static inline void
+__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start_addr == ~0UL)
+		tlb->start_addr = address;
+	tlb->end_addr = address + PAGE_SIZE;
+}
+
+#define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+
+#define tlb_remove_tlb_entry(tlb, ptep, addr)		\
+do {							\
+	tlb->need_flush = 1;				\
+	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
+} while (0)
+
+#define pte_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pte_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pmd_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pmd_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pud_free_tlb(tlb, pudp)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pud_free_tlb(tlb, pudp);			\
+} while (0)
+
+#endif /* _ASM_IA64_TLB_H */
diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h
new file mode 100644
index 000000000000..b65c62702724
--- /dev/null
+++ b/include/asm-ia64/tlbflush.h
@@ -0,0 +1,99 @@
+#ifndef _ASM_IA64_TLBFLUSH_H
+#define _ASM_IA64_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+/*
+ * Now for some TLB flushing routines.  This is the kind of stuff that
+ * can be very expensive, so try to avoid them whenever possible.
+ */
+
+/*
+ * Flush everything (kernel mapping may also have changed due to
+ * vmalloc/vfree).
+ */
+extern void local_flush_tlb_all (void);
+
+#ifdef CONFIG_SMP
+  extern void smp_flush_tlb_all (void);
+  extern void smp_flush_tlb_mm (struct mm_struct *mm);
+# define flush_tlb_all()	smp_flush_tlb_all()
+#else
+# define flush_tlb_all()	local_flush_tlb_all()
+#endif
+
+static inline void
+local_finish_flush_tlb_mm (struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		activate_context(mm);
+}
+
+/*
+ * Flush a specified user mapping.  This is called, e.g., as a result of fork() and
+ * exit().  fork() ends up here because the copy-on-write mechanism needs to write-protect
+ * the PTEs of the parent task.
+ */
+static inline void
+flush_tlb_mm (struct mm_struct *mm)
+{
+	if (!mm)
+		return;
+
+	mm->context = 0;
+
+	if (atomic_read(&mm->mm_users) == 0)
+		return;		/* happens as a result of exit_mmap() */
+
+#ifdef CONFIG_SMP
+	smp_flush_tlb_mm(mm);
+#else
+	local_finish_flush_tlb_mm(mm);
+#endif
+}
+
+extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
+/*
+ * Page-granular tlb flush.
+ */
+static inline void
+flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
+{
+#ifdef CONFIG_SMP
+	flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
+#else
+	if (vma->vm_mm == current->active_mm)
+		ia64_ptcl(addr, (PAGE_SHIFT << 2));
+	else
+		vma->vm_mm->context = 0;
+#endif
+}
+
+/*
+ * Flush the TLB entries mapping the virtually mapped linear page
+ * table corresponding to address range [START-END).
+ */
+static inline void
+flush_tlb_pgtables (struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+	/*
+	 * Deprecated.  The virtual page table is now flushed via the normal gather/flush
+	 * interface (see tlb.h).
+	 */
+}
+
+#define flush_tlb_kernel_range(start, end)	flush_tlb_all()	/* XXX fix me */
+
+#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
new file mode 100644
index 000000000000..21cf351fd05c
--- /dev/null
+++ b/include/asm-ia64/topology.h
@@ -0,0 +1,90 @@
+/*
+ * linux/include/asm-ia64/topology.h
+ *
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (__ffs(node_to_cpumask(node)))
+
+void build_cpu_to_node_map(void);
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 80,			\
+	.max_interval		= 320,			\
+	.busy_factor		= 320,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+/* sched_domains SD_ALLNODES_INIT for IA64 NUMA machines */
+#define SD_ALLNODES_INIT (struct sched_domain) {	\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 80,			\
+	.max_interval		= 320,			\
+	.busy_factor		= 320,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 100*(63+num_online_cpus())/64,   \
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
new file mode 100644
index 000000000000..a677565aa954
--- /dev/null
+++ b/include/asm-ia64/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
+
+/*
+ * This file is never included by application software unless explicitly requested (e.g.,
+ * via linux/types.h) in which case the application is Linux specific so (user-) name
+ * space pollution is not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x)		(x)
+# define __IA64_UL_CONST(x)	x
+
+# ifdef __KERNEL__
+#  define BITS_PER_LONG 64
+# endif
+
+#else
+# define __IA64_UL(x)		((unsigned long)(x))
+# define __IA64_UL_CONST(x)	x##UL
+
+typedef unsigned int umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+
+typedef __s8 s8;
+typedef __u8 u8;
+
+typedef __s16 s16;
+typedef __u16 u16;
+
+typedef __s32 s32;
+typedef __u32 u32;
+
+typedef __s64 s64;
+typedef __u64 u64;
+
+#define BITS_PER_LONG 64
+
+/* DMA addresses are 64-bits wide, in general.  */
+
+typedef u64 dma_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_TYPES_H */
diff --git a/include/asm-ia64/uaccess.h b/include/asm-ia64/uaccess.h
new file mode 100644
index 000000000000..8edd9a90949c
--- /dev/null
+++ b/include/asm-ia64/uaccess.h
@@ -0,0 +1,408 @@
+#ifndef _ASM_IA64_UACCESS_H
+#define _ASM_IA64_UACCESS_H
+
+/*
+ * This file defines various macros to transfer memory areas across
+ * the user/kernel boundary.  This needs to be done carefully because
+ * this code is executed in kernel mode and uses user-specified
+ * addresses.  Thus, we need to be careful not to let the user to
+ * trick us into accessing kernel memory that would normally be
+ * inaccessible.  This code is also fairly performance sensitive,
+ * so we want to spend as little time doing safety checks as
+ * possible.
+ *
+ * To make matters a bit more interesting, these macros sometimes also
+ * called from within the kernel itself, in which case the address
+ * validity check must be skipped.  The get_fs() macro tells us what
+ * to do: if get_fs()==USER_DS, checking is performed, if
+ * get_fs()==KERNEL_DS, checking is bypassed.
+ *
+ * Note that even if the memory area specified by the user is in a
+ * valid address range, it is still possible that we'll get a page
+ * fault while accessing it.  This is handled by filling out an
+ * exception handler fixup entry for each instruction that has the
+ * potential to fault.  When such a fault occurs, the page fault
+ * handler checks to see whether the faulting instruction has a fixup
+ * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
+ * then resumes execution at the continuation point.
+ *
+ * Based on <asm-alpha/uaccess.h>.
+ *
+ * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/page-flags.h>
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+/*
+ * For historical reasons, the following macros are grossly misnamed:
+ */
+#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
+#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()  (KERNEL_DS)
+#define get_fs()  (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+/*
+ * When accessing user memory, we need to make sure the entire area really is in
+ * user-level space.  In order to do this efficiently, we make sure that the page at
+ * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
+ * point inside the virtually mapped linear page table.
+ */
+#define __access_ok(addr, size, segment)						\
+({											\
+	__chk_user_ptr(addr);								\
+	(likely((unsigned long) (addr) <= (segment).seg)				\
+	 && ((segment).seg == KERNEL_DS.seg						\
+	     || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));	\
+})
+#define access_ok(type, addr, size)	__access_ok((addr), (size), get_fs())
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated
+verify_area (int type, const void __user *addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_unaligned_unknown (void);
+
+#define __put_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __put_user((x), (ptr)); break;					\
+		case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))				\
+			| (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))				\
+			| (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))				\
+			| (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __put_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+extern long __get_user_unaligned_unknown (void);
+
+#define __get_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __get_user((x), (ptr)); break;					\
+		case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))				\
+			| (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))				\
+			| (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))				\
+			| (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __get_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+#ifdef ASM_SUPPORTED
+  struct __large_struct { unsigned long buf[100]; };
+# define __m(x) (*(struct __large_struct __user *)(x))
+
+/* We need to declare the __ex_table section before we can use it in .xdata.  */
+asm (".section \"__ex_table\", \"a\"\n\t.previous");
+
+# define __get_user_size(val, addr, n, err)							\
+do {												\
+	register long __gu_r8 asm ("r8") = 0;							\
+	register long __gu_r9 asm ("r9");							\
+	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
+	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
+	     "[1:]"										\
+	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
+	(err) = __gu_r8;									\
+	(val) = __gu_r9;									\
+} while (0)
+
+/*
+ * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
+ * is because they do not write to any memory gcc knows about, so there are no aliasing
+ * issues.
+ */
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	register long __pu_r8 asm ("r8") = 0;							\
+	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
+		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
+		      "[1:]"									\
+		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
+	(err) = __pu_r8;									\
+} while (0)
+
+#else /* !ASM_SUPPORTED */
+# define RELOC_TYPE	2	/* ip-rel */
+# define __get_user_size(val, addr, n, err)				\
+do {									\
+	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
+	(err) = ia64_getreg(_IA64_REG_R8);				\
+	(val) = ia64_getreg(_IA64_REG_R9);				\
+} while (0)
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));	\
+	(err) = ia64_getreg(_IA64_REG_R8);							\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+extern void __get_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
+ * using r8/r9.
+ */
+#define __do_get_user(check, x, ptr, size, segment)					\
+({											\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
+	__typeof__ (size) __gu_size = (size);						\
+	long __gu_err = -EFAULT, __gu_val = 0;						\
+											\
+	if (!check || __access_ok(__gu_ptr, size, segment))				\
+		switch (__gu_size) {							\
+		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
+		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
+		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
+		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
+		      default: __get_user_unknown(); break;				\
+		}									\
+	(x) = (__typeof__(*(__gu_ptr))) __gu_val;					\
+	__gu_err;									\
+})
+
+#define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size, KERNEL_DS)
+#define __get_user_check(x, ptr, size, segment)	__do_get_user(1, x, ptr, size, segment)
+
+extern void __put_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
+ */
+#define __do_put_user(check, x, ptr, size, segment)					\
+({											\
+	__typeof__ (x) __pu_x = (x);							\
+	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
+	__typeof__ (size) __pu_size = (size);						\
+	long __pu_err = -EFAULT;							\
+											\
+	if (!check || __access_ok(__pu_ptr, __pu_size, segment))			\
+		switch (__pu_size) {							\
+		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
+		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
+		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
+		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
+		      default: __put_user_unknown(); break;				\
+		}									\
+	__pu_err;									\
+})
+
+#define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size, KERNEL_DS)
+#define __put_user_check(x, ptr, size, segment)	__do_put_user(1, x, ptr, size, segment)
+
+/*
+ * Complex access routines
+ */
+extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
+					       unsigned long count);
+
+static inline unsigned long
+__copy_to_user (void __user *to, const void *from, unsigned long count)
+{
+	return __copy_user(to, (void __user *) from, count);
+}
+
+static inline unsigned long
+__copy_from_user (void *to, const void __user *from, unsigned long count)
+{
+	return __copy_user((void __user *) to, from, count);
+}
+
+#define __copy_to_user_inatomic		__copy_to_user
+#define __copy_from_user_inatomic	__copy_from_user
+#define copy_to_user(to, from, n)							\
+({											\
+	void __user *__cu_to = (to);							\
+	const void *__cu_from = (from);							\
+	long __cu_len = (n);								\
+											\
+	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
+		__cu_len = __copy_user(__cu_to, (void __user *) __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define copy_from_user(to, from, n)							\
+({											\
+	void *__cu_to = (to);								\
+	const void __user *__cu_from = (from);						\
+	long __cu_len = (n);								\
+											\
+	__chk_user_ptr(__cu_from);							\
+	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
+		__cu_len = __copy_user((void __user *) __cu_to, __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
+
+static inline unsigned long
+copy_in_user (void __user *to, const void __user *from, unsigned long n)
+{
+	if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_user(to, from, n);
+	return n;
+}
+
+extern unsigned long __do_clear_user (void __user *, unsigned long);
+
+#define __clear_user(to, n)		__do_clear_user(to, n)
+
+#define clear_user(to, n)					\
+({								\
+	unsigned long __cu_len = (n);				\
+	if (__access_ok(to, __cu_len, get_fs()))		\
+		__cu_len = __do_clear_user(to, __cu_len);	\
+	__cu_len;						\
+})
+
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
+ * strlen.
+ */
+extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
+
+#define strncpy_from_user(to, from, n)					\
+({									\
+	const char __user * __sfu_from = (from);			\
+	long __sfu_ret = -EFAULT;					\
+	if (__access_ok(__sfu_from, 0, get_fs()))			\
+		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
+	__sfu_ret;							\
+})
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern unsigned long __strlen_user (const char __user *);
+
+#define strlen_user(str)				\
+({							\
+	const char __user *__su_str = (str);		\
+	unsigned long __su_ret = 0;			\
+	if (__access_ok(__su_str, 0, get_fs()))		\
+		__su_ret = __strlen_user(__su_str);	\
+	__su_ret;					\
+})
+
+/*
+ * Returns: 0 if exception before NUL or reaching the supplied limit
+ * (N), a value greater than N if the limit would be exceeded, else
+ * strlen.
+ */
+extern unsigned long __strnlen_user (const char __user *, long);
+
+#define strnlen_user(str, len)					\
+({								\
+	const char __user *__su_str = (str);			\
+	unsigned long __su_ret = 0;				\
+	if (__access_ok(__su_str, 0, get_fs()))			\
+		__su_ret = __strnlen_user(__su_str, len);	\
+	__su_ret;						\
+})
+
+/* Generic code can't deal with the location-relative format that we use for compactness.  */
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
+struct exception_table_entry {
+	int addr;	/* location-relative address of insn this fixup is for */
+	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+};
+
+extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+static inline int
+ia64_done_with_exception (struct pt_regs *regs)
+{
+	const struct exception_table_entry *e;
+	e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
+	if (e) {
+		ia64_handle_exception(regs, e);
+		return 1;
+	}
+	return 0;
+}
+
+#define ARCH_HAS_TRANSLATE_MEM_PTR	1
+static __inline__ char *
+xlate_dev_mem_ptr (unsigned long p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = pfn_to_page(p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = __va(p);
+
+	return ptr;
+}
+
+/*
+ * Convert a virtual cached kernel memory pointer to an uncached pointer
+ */
+static __inline__ char *
+xlate_dev_kmem_ptr (char * p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = virt_to_page((unsigned long)p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = p;
+
+	return ptr;
+}
+
+#endif /* _ASM_IA64_UACCESS_H */
diff --git a/include/asm-ia64/ucontext.h b/include/asm-ia64/ucontext.h
new file mode 100644
index 000000000000..bf573dc8ca6a
--- /dev/null
+++ b/include/asm-ia64/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_UCONTEXT_H
+#define _ASM_IA64_UCONTEXT_H
+
+struct ucontext {
+	struct sigcontext uc_mcontext;
+};
+
+#define uc_link		uc_mcontext.sc_gr[0]	/* wrong type; nobody cares */
+#define uc_sigmask	uc_mcontext.sc_sigmask
+#define uc_stack	uc_mcontext.sc_stack
+
+#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/include/asm-ia64/unaligned.h b/include/asm-ia64/unaligned.h
new file mode 100644
index 000000000000..bb8559888103
--- /dev/null
+++ b/include/asm-ia64/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_UNALIGNED_H
+#define _ASM_IA64_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
new file mode 100644
index 000000000000..33e26c557c5c
--- /dev/null
+++ b/include/asm-ia64/unistd.h
@@ -0,0 +1,399 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#define NR_syscalls			256 /* length of syscall table */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <asm/ptrace.h>
+#include <linux/stringify.h>
+#include <linux/syscalls.h>
+
+static inline long
+open (const char * name, int mode, int flags)
+{
+	return sys_open(name, mode, flags);
+}
+
+static inline long
+dup (int fd)
+{
+	return sys_dup(fd);
+}
+
+static inline long
+close (int fd)
+{
+	return sys_close(fd);
+}
+
+static inline off_t
+lseek (int fd, off_t off, int whence)
+{
+	return sys_lseek(fd, off, whence);
+}
+
+static inline void
+_exit (int value)
+{
+	sys_exit(value);
+}
+
+#define exit(x) _exit(x)
+
+static inline long
+write (int fd, const char * buf, size_t nr)
+{
+	return sys_write(fd, buf, nr);
+}
+
+static inline long
+read (int fd, char * buf, size_t nr)
+{
+	return sys_read(fd, buf, nr);
+}
+
+
+static inline long
+setsid (void)
+{
+	return sys_setsid();
+}
+
+static inline pid_t
+waitpid (int pid, int * wait_stat, int flags)
+{
+	return sys_wait4(pid, wait_stat, flags, NULL);
+}
+
+
+extern int execve (const char *filename, char *const av[], char *const ep[]);
+extern pid_t clone (unsigned long flags, void *sp);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+			   char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_ptrace(long request, pid_t pid,
+			   unsigned long addr, unsigned long data);
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/unwind.h b/include/asm-ia64/unwind.h
new file mode 100644
index 000000000000..61426ad3ecdb
--- /dev/null
+++ b/include/asm-ia64/unwind.h
@@ -0,0 +1,240 @@
+#ifndef _ASM_IA64_UNWIND_H
+#define _ASM_IA64_UNWIND_H
+
+/*
+ * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * A simple API for unwinding kernel stacks.  This is used for
+ * debugging and error reporting purposes.  The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whitles, so there
+ * is not much point in implementing the full IA-64 unwind API (though
+ * it would of course be possible to implement the kernel API on top
+ * of it).
+ */
+
+struct task_struct;	/* forward declaration */
+struct switch_stack;	/* forward declaration */
+
+enum unw_application_register {
+	UNW_AR_BSP,
+	UNW_AR_BSPSTORE,
+	UNW_AR_PFS,
+	UNW_AR_RNAT,
+	UNW_AR_UNAT,
+	UNW_AR_LC,
+	UNW_AR_EC,
+	UNW_AR_FPSR,
+	UNW_AR_RSC,
+	UNW_AR_CCV,
+	UNW_AR_CSD,
+	UNW_AR_SSD
+};
+
+/*
+ * The following declarations are private to the unwind
+ * implementation:
+ */
+
+struct unw_stack {
+	unsigned long limit;
+	unsigned long top;
+};
+
+#define UNW_FLAG_INTERRUPT_FRAME	(1UL << 0)
+
+/*
+ * No user of this module should every access this structure directly
+ * as it is subject to change.  It is declared here solely so we can
+ * use automatic variables.
+ */
+struct unw_frame_info {
+	struct unw_stack regstk;
+	struct unw_stack memstk;
+	unsigned int flags;
+	short hint;
+	short prev_script;
+
+	/* current frame info: */
+	unsigned long bsp;		/* backing store pointer value */
+	unsigned long sp;		/* stack pointer value */
+	unsigned long psp;		/* previous sp value */
+	unsigned long ip;		/* instruction pointer value */
+	unsigned long pr;		/* current predicate values */
+	unsigned long *cfm_loc;		/* cfm save location (or NULL) */
+	unsigned long pt;		/* struct pt_regs location */
+
+	struct task_struct *task;
+	struct switch_stack *sw;
+
+	/* preserved state: */
+	unsigned long *bsp_loc;		/* previous bsp save location */
+	unsigned long *bspstore_loc;
+	unsigned long *pfs_loc;
+	unsigned long *rnat_loc;
+	unsigned long *rp_loc;
+	unsigned long *pri_unat_loc;
+	unsigned long *unat_loc;
+	unsigned long *pr_loc;
+	unsigned long *lc_loc;
+	unsigned long *fpsr_loc;
+	struct unw_ireg {
+		unsigned long *loc;
+		struct unw_ireg_nat {
+			long type : 3;			/* enum unw_nat_type */
+			signed long off : 61;		/* NaT word is at loc+nat.off */
+		} nat;
+	} r4, r5, r6, r7;
+	unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
+	struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
+};
+
+/*
+ * The official API follows below:
+ */
+
+struct unw_table_entry {
+	u64 start_offset;
+	u64 end_offset;
+	u64 info_offset;
+};
+
+/*
+ * Initialize unwind support.
+ */
+extern void unw_init (void);
+
+extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
+				   const void *table_start, const void *table_end);
+
+extern void unw_remove_unwind_table (void *handle);
+
+/*
+ * Prepare to unwind blocked task t.
+ */
+extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
+
+/*
+ * Prepare to unwind from interruption.  The pt-regs and switch-stack structures must have
+ * be "adjacent" (no state modifications between pt-regs and switch-stack).
+ */
+extern void unw_init_from_interruption (struct unw_frame_info *info, struct task_struct *t,
+					struct pt_regs *pt, struct switch_stack *sw);
+
+extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
+				 struct switch_stack *sw);
+
+/*
+ * Prepare to unwind the currently running thread.
+ */
+extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
+
+/*
+ * Unwind to previous to frame.  Returns 0 if successful, negative
+ * number in case of an error.
+ */
+extern int unw_unwind (struct unw_frame_info *info);
+
+/*
+ * Unwind until the return pointer is in user-land (or until an error
+ * occurs).  Returns 0 if successful, negative number in case of
+ * error.
+ */
+extern int unw_unwind_to_user (struct unw_frame_info *info);
+
+#define unw_is_intr_frame(info)	(((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
+
+static inline int
+unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->ip;
+	return 0;
+}
+
+static inline int
+unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->sp;
+	return 0;
+}
+
+static inline int
+unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->psp;
+	return 0;
+}
+
+static inline int
+unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->bsp;
+	return 0;
+}
+
+static inline int
+unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = *(info)->cfm_loc;
+	return 0;
+}
+
+static inline int
+unw_set_cfm (struct unw_frame_info *info, unsigned long val)
+{
+	*(info)->cfm_loc = val;
+	return 0;
+}
+
+static inline int
+unw_get_rp (struct unw_frame_info *info, unsigned long *val)
+{
+	if (!info->rp_loc)
+		return -1;
+	*val = *info->rp_loc;
+	return 0;
+}
+
+extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
+extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
+extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
+
+static inline int
+unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
+{
+	return unw_access_gr(i, n, &v, &nat, 1);
+}
+
+static inline int
+unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_br(i, n, &v, 1);
+}
+
+static inline int
+unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
+{
+	return unw_access_fr(i, n, &v, 1);
+}
+
+static inline int
+unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_ar(i, n, &v, 1);
+}
+
+static inline int
+unw_set_pr (struct unw_frame_info *i, unsigned long v)
+{
+	return unw_access_pr(i, &v, 1);
+}
+
+#define unw_get_gr(i,n,v,nat)	unw_access_gr(i,n,v,nat,0)
+#define unw_get_br(i,n,v)	unw_access_br(i,n,v,0)
+#define unw_get_fr(i,n,v)	unw_access_fr(i,n,v,0)
+#define unw_get_ar(i,n,v)	unw_access_ar(i,n,v,0)
+#define unw_get_pr(i,v)		unw_access_pr(i,v,0)
+
+#endif /* _ASM_UNWIND_H */
diff --git a/include/asm-ia64/user.h b/include/asm-ia64/user.h
new file mode 100644
index 000000000000..78e5a20140aa
--- /dev/null
+++ b/include/asm-ia64/user.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_USER_H
+#define _ASM_IA64_USER_H
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as
+ * follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ *
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#define EF_SIZE		3072	/* XXX fix me */
+
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_IA64_USER_H */
diff --git a/include/asm-ia64/ustack.h b/include/asm-ia64/ustack.h
new file mode 100644
index 000000000000..da55c91246e3
--- /dev/null
+++ b/include/asm-ia64/ustack.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_USTACK_H
+#define _ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+#include <asm/page.h>
+
+/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
+#define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
+/* Make a default stack size of 2GB */
+#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
+#define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
+
+#endif /* _ASM_IA64_USTACK_H */
diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h
new file mode 100644
index 000000000000..1f446d6841f6
--- /dev/null
+++ b/include/asm-ia64/vga.h
@@ -0,0 +1,22 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *	(c) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ *	(c) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#ifndef __ASM_IA64_VGA_H_
+#define __ASM_IA64_VGA_H_
+
+/*
+ * On the PC, we can just recalculate addresses and then access the
+ * videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x)	((unsigned long) ioremap((x), 0))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif /* __ASM_IA64_VGA_H_ */
diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h
new file mode 100644
index 000000000000..41fb8744d17a
--- /dev/null
+++ b/include/asm-ia64/xor.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-ia64/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+	.name =	"ia64",
+	.do_2 =	xor_ia64_2,
+	.do_3 =	xor_ia64_3,
+	.do_4 =	xor_ia64_4,
+	.do_5 =	xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/include/asm-m32r/a.out.h b/include/asm-m32r/a.out.h
new file mode 100644
index 000000000000..4619ba5c372e
--- /dev/null
+++ b/include/asm-m32r/a.out.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_M32R_A_OUT_H
+#define _ASM_M32R_A_OUT_H
+
+/* orig : i386 2.4.18 */
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* _ASM_M32R_A_OUT_H */
diff --git a/include/asm-m32r/addrspace.h b/include/asm-m32r/addrspace.h
new file mode 100644
index 000000000000..06a83dc94648
--- /dev/null
+++ b/include/asm-m32r/addrspace.h
@@ -0,0 +1,58 @@
+/* $Id$ */
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 by Hiroyuki Kondo
+ *
+ * Defitions for the address spaces of the M32R CPUs.
+ */
+#ifndef __ASM_M32R_ADDRSPACE_H
+#define __ASM_M32R_ADDRSPACE_H
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ */
+#define KUSEG                   0x00000000
+#define KSEG0                   0x80000000
+#define KSEG1                   0xa0000000
+#define KSEG2                   0xc0000000
+#define KSEG3                   0xe0000000
+
+#define K0BASE  KSEG0
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#ifndef __ASSEMBLY__
+#define KSEGX(a)                (((unsigned long)(a)) & 0xe0000000)
+#else
+#define KSEGX(a)                ((a) & 0xe0000000)
+#endif
+
+/*
+ * Returns the physical address of a KSEG0/KSEG1 address
+ */
+#ifndef __ASSEMBLY__
+#define PHYSADDR(a)		(((unsigned long)(a)) & 0x1fffffff)
+#else
+#define PHYSADDR(a)		((a) & 0x1fffffff)
+#endif
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#ifndef __ASSEMBLY__
+#define KSEG0ADDR(a)		((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0))
+#define KSEG1ADDR(a)		((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1))
+#define KSEG2ADDR(a)		((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2))
+#define KSEG3ADDR(a)		((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3))
+#else
+#define KSEG0ADDR(a)		(((a) & 0x1fffffff) | KSEG0)
+#define KSEG1ADDR(a)		(((a) & 0x1fffffff) | KSEG1)
+#define KSEG2ADDR(a)		(((a) & 0x1fffffff) | KSEG2)
+#define KSEG3ADDR(a)		(((a) & 0x1fffffff) | KSEG3)
+#endif
+
+#endif /* __ASM_M32R_ADDRSPACE_H */
diff --git a/include/asm-m32r/assembler.h b/include/asm-m32r/assembler.h
new file mode 100644
index 000000000000..e1dff9d6baad
--- /dev/null
+++ b/include/asm-m32r/assembler.h
@@ -0,0 +1,225 @@
+#ifndef _ASM_M32R_ASSEMBLER_H
+#define _ASM_M32R_ASSEMBLER_H
+
+/*
+ * linux/asm-m32r/assembler.h
+ *
+ * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This file contains M32R architecture specific macro definitions.
+ */
+
+#include <linux/config.h>
+
+#ifndef __STR
+#ifdef __ASSEMBLY__
+#define __STR(x) x
+#else
+#define __STR(x) #x
+#endif
+#endif /* __STR */
+
+#ifdef CONFIG_SMP
+#define M32R_LOCK	__STR(lock)
+#define M32R_UNLOCK	__STR(unlock)
+#else
+#define M32R_LOCK	__STR(ld)
+#define M32R_UNLOCK	__STR(st)
+#endif
+
+#ifdef __ASSEMBLY__
+#undef ENTRY
+#define ENTRY(name) ENTRY_M name
+	.macro  ENTRY_M name
+	.global \name
+	ALIGN
+\name:
+	.endm
+#endif
+
+
+/**
+ * LDIMM - load immediate value
+ * STI - enable interruption
+ * CLI - disable interruption
+ */
+
+#ifdef __ASSEMBLY__
+
+#define LDIMM(reg,x) LDIMM reg x
+	.macro LDIMM reg x
+	seth	\reg, #high(\x)
+	or3	\reg, \reg, #low(\x)
+	.endm
+
+#if !defined(CONFIG_CHIP_M32102)
+#define STI(reg) STI_M reg
+	.macro STI_M reg
+	setpsw  #0x40	    ->	nop
+	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
+	.endm
+
+#define CLI(reg) CLI_M reg
+	.macro CLI_M reg
+	clrpsw  #0x40	    ->	nop
+	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
+	.endm
+#else	/* CONFIG_CHIP_M32102 */
+#define STI(reg) STI_M reg
+	.macro STI_M reg
+	mvfc	\reg, psw
+	or3	\reg, \reg, #0x0040
+	mvtc	\reg, psw
+	.endm
+
+#define CLI(reg) CLI_M reg
+	.macro CLI_M reg
+	mvfc	\reg, psw
+	and3	\reg, \reg, #0xffbf
+	mvtc	\reg, psw
+	.endm
+#endif	/* CONFIG_CHIP_M32102 */
+
+	.macro	SAVE_ALL
+	push	r0		; orig_r0
+	push	sp		; spi (r15)
+	push	lr		; r14
+	push	r13
+	mvfc	r13, cr3	; spu
+	push	r13
+	mvfc	r13, bbpc
+	push	r13
+	mvfc	r13, bbpsw
+	push	r13
+	mvfc	r13, bpc
+	push	r13
+	mvfc	r13, psw
+	push	r13
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	mvfaclo	r13, a1
+	push	r13
+	mvfachi r13, a1
+	push	r13
+	mvfaclo	r13, a0
+	push	r13
+	mvfachi	r13, a0
+	push	r13
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	mvfaclo	r13
+	push	r13
+	mvfachi	r13
+	push	r13
+#else
+#error unknown isa configuration
+#endif
+	ldi	r13, #-1
+	push	r13		; syscall_nr (default: -1)
+	push	r12
+	push	r11
+	push	r10
+	push	r9
+	push	r8
+	push	r7
+	push	r3
+	push	r2
+	push	r1
+	push	r0
+	addi	sp, #-4		; room for implicit pt_regs parameter
+	push	r6
+	push	r5
+	push	r4
+	.endm
+
+	.macro	RESTORE_ALL
+	pop	r4
+	pop	r5
+	pop	r6
+	addi	sp, #4
+	pop	r0
+	pop	r1
+	pop	r2
+	pop	r3
+	pop	r7
+	pop	r8
+	pop	r9
+	pop	r10
+	pop	r11
+	pop	r12
+	addi	r15, #4		; Skip syscall number
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	pop	r13
+	mvtachi	r13, a0
+	pop	r13
+	mvtaclo	r13, a0
+	pop	r13
+	mvtachi	r13, a1
+	pop	r13
+	mvtaclo	r13, a1
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	pop	r13
+	mvtachi	r13
+	pop	r13
+	mvtaclo	r13
+#else
+#error unknown isa configuration
+#endif
+	pop	r14
+	mvtc	r14, psw
+	pop	r14
+	mvtc	r14, bpc
+	addi	sp, #8		; Skip bbpsw, bbpc
+	pop	r14
+	mvtc	r14, cr3	; spu
+	pop	r13
+	pop	lr		; r14
+	pop	sp		; spi (r15)
+	addi	sp, #4		; Skip orig_r0
+	.fillinsn
+1:	rte
+	.section .fixup,"ax"
+2:	bl	do_exit
+	.previous
+	.section __ex_table,"a"
+	ALIGN
+	.long	1b, 2b
+	.previous
+	.endm
+
+#define GET_CURRENT(reg)  get_current reg
+	.macro get_current reg
+	ldi  \reg, #-8192
+	and  \reg, sp
+	.endm
+
+#if !defined(CONFIG_CHIP_M32102)
+	.macro	SWITCH_TO_KERNEL_STACK
+	; switch to kernel stack (spi)
+	clrpsw	#0x80	    ->	nop
+	.endm
+#else	/* CONFIG_CHIP_M32102 */
+	.macro	SWITCH_TO_KERNEL_STACK
+	push	r0		; save r0 for working
+	mvfc	r0, psw
+	and3	r0, r0, #0x00ff7f
+	mvtc	r0, psw
+	slli	r0, #16
+	bltz	r0, 1f		; check BSM-bit
+;
+	;; called from kernel context: previous stack = spi
+	pop	r0		; retrieve r0
+	bra	2f
+	.fillinsn
+1:
+	;; called from user context: previous stack = spu
+	mvfc	r0, cr3		; spu
+	addi	r0, #4
+	mvtc	r0, cr3		; spu
+	ld	r0, @(-4,r0)	; retrieve r0
+	.fillinsn
+2:
+	.endm
+#endif	/* CONFIG_CHIP_M32102 */
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_M32R_ASSEMBLER_H */
diff --git a/include/asm-m32r/atomic.h b/include/asm-m32r/atomic.h
new file mode 100644
index 000000000000..bfff69a49936
--- /dev/null
+++ b/include/asm-m32r/atomic.h
@@ -0,0 +1,295 @@
+#ifndef _ASM_M32R_ATOMIC_H
+#define _ASM_M32R_ATOMIC_H
+
+/*
+ *  linux/include/asm-m32r/atomic.h
+ *
+ *  M32R version:
+ *    Copyright (C) 2001, 2002  Hitoshi Yamamoto
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)	((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+/**
+ * atomic_add_return - add integer to atomic variable and return it
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and return (@i + @v).
+ */
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int result;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_add_return		\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"add	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (result)
+		: "r" (&v->counter), "r" (i)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	return result;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable and return it
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and return (@v - @i).
+ */
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int result;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_sub_return		\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"sub	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (result)
+		: "r" (&v->counter), "r" (i)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	return result;
+}
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+#define atomic_add(i,v) ((void) atomic_add_return((i), (v)))
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v)))
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+
+/**
+ * atomic_inc_return - increment atomic variable and return it
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns the result.
+ */
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	unsigned long flags;
+	int result;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_inc_return		\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #1;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (result)
+		: "r" (&v->counter)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	return result;
+}
+
+/**
+ * atomic_dec_return - decrement atomic variable and return it
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns the result.
+ */
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	unsigned long flags;
+	int result;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_dec_return		\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (result)
+		: "r" (&v->counter)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	return result;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) ((void)atomic_inc_return(v))
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) ((void)atomic_dec_return(v))
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all
+ * other cases.
+ */
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
+
+static __inline__ void atomic_clear_mask(unsigned long  mask, atomic_t *addr)
+{
+	unsigned long flags;
+	unsigned long tmp;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_clear_mask		\n\t"
+		DCACHE_CLEAR("%0", "r5", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"and	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (tmp)
+		: "r" (addr), "r" (~mask)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r5"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned long  mask, atomic_t *addr)
+{
+	unsigned long flags;
+	unsigned long tmp;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# atomic_set_mask		\n\t"
+		DCACHE_CLEAR("%0", "r5", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"or	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (tmp)
+		: "r" (addr), "r" (mask)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r5"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing on m32r */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif	/* _ASM_M32R_ATOMIC_H */
diff --git a/include/asm-m32r/bitops.h b/include/asm-m32r/bitops.h
new file mode 100644
index 000000000000..e78443981349
--- /dev/null
+++ b/include/asm-m32r/bitops.h
@@ -0,0 +1,702 @@
+#ifndef _ASM_M32R_BITOPS_H
+#define _ASM_M32R_BITOPS_H
+
+/*
+ *  linux/include/asm-m32r/bitops.h
+ *
+ *  Copyright 1992, Linus Torvalds.
+ *
+ *  M32R version:
+ *    Copyright (C) 2001, 2002  Hitoshi Yamamoto
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/types.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+	__u32 mask;
+	volatile __u32 *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "r6", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"or	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (tmp)
+		: "r" (a), "r" (mask)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __set_bit(int nr, volatile void * addr)
+{
+	__u32 mask;
+	volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	*a |= mask;
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void clear_bit(int nr, volatile void * addr)
+{
+	__u32 mask;
+	volatile __u32 *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "r6", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"and	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (tmp)
+		: "r" (a), "r" (~mask)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+}
+
+static __inline__ void __clear_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask;
+	volatile unsigned long *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	*a &= ~mask;
+}
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __change_bit(int nr, volatile void * addr)
+{
+	__u32 mask;
+	volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	*a ^= mask;
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+	__u32  mask;
+	volatile __u32  *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "r6", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"xor	%0, %2;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (tmp)
+		: "r" (a), "r" (mask)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "%1", "%2")
+		M32R_LOCK" %0, @%2;		\n\t"
+		"mv	%1, %0;			\n\t"
+		"and	%0, %3;			\n\t"
+		"or	%1, %3;			\n\t"
+		M32R_UNLOCK" %1, @%2;		\n\t"
+		: "=&r" (oldbit), "=&r" (tmp)
+		: "r" (a), "r" (mask)
+		: "memory"
+	);
+	local_irq_restore(flags);
+
+	return (oldbit != 0);
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	oldbit = (*a & mask);
+	*a |= mask;
+
+	return (oldbit != 0);
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "%1", "%3")
+		M32R_LOCK" %0, @%3;		\n\t"
+		"mv	%1, %0;			\n\t"
+		"and	%0, %2;			\n\t"
+		"not	%2, %2;			\n\t"
+		"and	%1, %2;			\n\t"
+		M32R_UNLOCK" %1, @%3;		\n\t"
+		: "=&r" (oldbit), "=&r" (tmp), "+r" (mask)
+		: "r" (a)
+		: "memory"
+	);
+	local_irq_restore(flags);
+
+	return (oldbit != 0);
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	oldbit = (*a & mask);
+	*a &= ~mask;
+
+	return (oldbit != 0);
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+	oldbit = (*a & mask);
+	*a ^= mask;
+
+	return (oldbit != 0);
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+	__u32 mask, oldbit;
+	volatile __u32 *a = addr;
+	unsigned long flags;
+	unsigned long tmp;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "%1", "%2")
+		M32R_LOCK" %0, @%2;		\n\t"
+		"mv	%1, %0;			\n\t"
+		"and	%0, %3;			\n\t"
+		"xor	%1, %3;			\n\t"
+		M32R_UNLOCK" %1, @%2;		\n\t"
+		: "=&r" (oldbit), "=&r" (tmp)
+		: "r" (a), "r" (mask)
+		: "memory"
+	);
+	local_irq_restore(flags);
+
+	return (oldbit != 0);
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static __inline__ int test_bit(int nr, const volatile void * addr)
+{
+	__u32 mask;
+	const volatile __u32 *a = addr;
+
+	a += (nr >> 5);
+	mask = (1 << (nr & 0x1F));
+
+	return ((*a & mask) != 0);
+}
+
+/**
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	int k;
+
+	word = ~word;
+	k = 0;
+	if (!(word & 0x0000ffff)) { k += 16; word >>= 16; }
+	if (!(word & 0x000000ff)) { k += 8; word >>= 8; }
+	if (!(word & 0x0000000f)) { k += 4; word >>= 4; }
+	if (!(word & 0x00000003)) { k += 2; word >>= 2; }
+	if (!(word & 0x00000001)) { k += 1; }
+
+	return k;
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ int find_next_zero_bit(const unsigned long *addr,
+					 int size, int offset)
+{
+	const unsigned long *p = addr + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	int k = 0;
+
+	if (!(word & 0x0000ffff)) { k += 16; word >>= 16; }
+	if (!(word & 0x000000ff)) { k += 8; word >>= 8; }
+	if (!(word & 0x0000000f)) { k += 4; word >>= 4; }
+	if (!(word & 0x00000003)) { k += 2; word >>= 2; }
+	if (!(word & 0x00000001)) { k += 1;}
+
+	return k;
+}
+
+/*
+ * fls: find last bit set.
+ */
+#define fls(x) generic_fls(x)
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+#define ffs(x)	generic_ffs(x)
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x)	generic_hweight32(x)
+#define hweight16(x)	generic_hweight16(x)
+#define hweight8(x)	generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+/*
+ * ext2_XXXX function
+ * orig: include/asm-sh/bitops.h
+ */
+
+#ifdef __LITTLE_ENDIAN__
+#define ext2_set_bit			test_and_set_bit
+#define ext2_clear_bit			__test_and_clear_bit
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+#else
+static inline int ext2_set_bit(int nr, volatile void * addr)
+{
+	__u8 mask, oldbit;
+	volatile __u8 *a = addr;
+
+	a += (nr >> 3);
+	mask = (1 << (nr & 0x07));
+	oldbit = (*a & mask);
+	*a |= mask;
+
+	return (oldbit != 0);
+}
+
+static inline int ext2_clear_bit(int nr, volatile void * addr)
+{
+	__u8 mask, oldbit;
+	volatile __u8 *a = addr;
+
+	a += (nr >> 3);
+	mask = (1 << (nr & 0x07));
+	oldbit = (*a & mask);
+	*a &= ~mask;
+
+	return (oldbit != 0);
+}
+
+static inline int ext2_test_bit(int nr, const volatile void * addr)
+{
+	__u32 mask;
+	const volatile __u8 *a = addr;
+
+	a += (nr >> 3);
+	mask = (1 << (nr & 0x07));
+
+	return ((mask & *a) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+	ext2_find_next_zero_bit((addr), (size), 0)
+
+static inline unsigned long ext2_find_next_zero_bit(void *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+#endif
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)		__test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)			__set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	__test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_BITOPS_H */
diff --git a/include/asm-m32r/bug.h b/include/asm-m32r/bug.h
new file mode 100644
index 000000000000..4cc0462c15b8
--- /dev/null
+++ b/include/asm-m32r/bug.h
@@ -0,0 +1,4 @@
+#ifndef _M32R_BUG_H
+#define _M32R_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-m32r/bugs.h b/include/asm-m32r/bugs.h
new file mode 100644
index 000000000000..9a56f661bdb3
--- /dev/null
+++ b/include/asm-m32r/bugs.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_M32R_BUGS_H
+#define _ASM_M32R_BUGS_H
+
+/* $Id$ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *     void check_bugs(void);
+ */
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+	extern unsigned long loops_per_jiffy;
+
+	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+}
+
+#endif  /* _ASM_M32R_BUGS_H */
diff --git a/include/asm-m32r/byteorder.h b/include/asm-m32r/byteorder.h
new file mode 100644
index 000000000000..3c0b9a2e03bc
--- /dev/null
+++ b/include/asm-m32r/byteorder.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_M32R_BYTEORDER_H
+#define _ASM_M32R_BYTEORDER_H
+
+/* $Id$ */
+
+#include <asm/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#if defined(__LITTLE_ENDIAN__)
+#  include <linux/byteorder/little_endian.h>
+#else
+#  include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* _ASM_M32R_BYTEORDER_H */
diff --git a/include/asm-m32r/cache.h b/include/asm-m32r/cache.h
new file mode 100644
index 000000000000..724820596980
--- /dev/null
+++ b/include/asm-m32r/cache.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_M32R_CACHE_H
+#define _ASM_M32R_CACHE_H
+
+/* $Id$ */
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT		4
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX	4
+
+#endif  /* _ASM_M32R_CACHE_H */
diff --git a/include/asm-m32r/cachectl.h b/include/asm-m32r/cachectl.h
new file mode 100644
index 000000000000..2aab8f6fff41
--- /dev/null
+++ b/include/asm-m32r/cachectl.h
@@ -0,0 +1,26 @@
+/*
+ * cachectl.h -- defines for M32R cache control system calls
+ *
+ * Copyright (C) 2003 by Kazuhiro Inaoka
+ */
+#ifndef	__ASM_M32R_CACHECTL
+#define	__ASM_M32R_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ *
+ * cacheflush() is currently fluch_cache_all().
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE	0	/* make pages cacheable */
+#define UNCACHEABLE	1	/* make pages uncacheable */
+
+#endif	/* __ASM_M32R_CACHECTL */
diff --git a/include/asm-m32r/cacheflush.h b/include/asm-m32r/cacheflush.h
new file mode 100644
index 000000000000..46fc4c325108
--- /dev/null
+++ b/include/asm-m32r/cacheflush.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_M32R_CACHEFLUSH_H
+#define _ASM_M32R_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+extern void _flush_cache_all(void);
+extern void _flush_cache_copyback_all(void);
+
+#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#ifndef CONFIG_SMP
+#define flush_icache_range(start, end)		_flush_cache_copyback_all()
+#define flush_icache_page(vma,pg)		_flush_cache_copyback_all()
+#define flush_icache_user_range(vma,pg,adr,len)	_flush_cache_copyback_all()
+#define flush_cache_sigtramp(addr)		_flush_cache_copyback_all()
+#else	/* CONFIG_SMP */
+extern void smp_flush_cache_all(void);
+#define flush_icache_range(start, end)		smp_flush_cache_all()
+#define flush_icache_page(vma,pg)		smp_flush_cache_all()
+#define flush_icache_user_range(vma,pg,adr,len)	smp_flush_cache_all()
+#define flush_cache_sigtramp(addr)		_flush_cache_copyback_all()
+#endif	/* CONFIG_SMP */
+#elif defined(CONFIG_CHIP_M32102)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		_flush_cache_all()
+#define flush_icache_page(vma,pg)		_flush_cache_all()
+#define flush_icache_user_range(vma,pg,adr,len)	_flush_cache_all()
+#define flush_cache_sigtramp(addr)		_flush_cache_all()
+#else
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(addr)		do { } while (0)
+#endif	/* CONFIG_CHIP_* */
+
+#define flush_cache_vmap(start, end)	do { } while (0)
+#define flush_cache_vunmap(start, end)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+do {								\
+	memcpy(dst, src, len);					\
+	flush_icache_user_range(vma, page, vaddr, len);		\
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy(dst, src, len)
+
+#endif /* _ASM_M32R_CACHEFLUSH_H */
+
diff --git a/include/asm-m32r/checksum.h b/include/asm-m32r/checksum.h
new file mode 100644
index 000000000000..99f37dbf2558
--- /dev/null
+++ b/include/asm-m32r/checksum.h
@@ -0,0 +1,208 @@
+#ifdef __KERNEL__
+#ifndef _ASM_M32R_CHECKSUM_H
+#define _ASM_M32R_CHECKSUM_H
+
+/*
+ * include/asm-m32r/checksum.h
+ *
+ * IP/TCP/UDP checksum routines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Some code taken from mips and parisc architecture.
+ *
+ *    Copyright (C) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage unsigned int csum_partial(const unsigned char *buff,
+				     int len, unsigned int sum);
+
+/*
+ * The same as csum_partial, but copies from src while it checksums.
+ *
+ * Here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+					      unsigned char *dst,
+                                              int len, unsigned int sum);
+
+/*
+ * This is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros thre rest of the buffer.
+ */
+extern unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+                                                unsigned char *dst,
+                                                int len, unsigned int sum,
+                                                int *err_ptr);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned long tmpreg;
+	__asm__(
+		"	sll3	%1, %0, #16 \n"
+		"	cmp	%0, %0 \n"
+		"	addx	%0, %1 \n"
+		"	ldi	%1, #0 \n"
+		"	srli	%0, #16 \n"
+		"	addx	%0, %1 \n"
+		"	xor3	%0, %0, #0x0000ffff \n"
+		: "=r" (sum), "=&r" (tmpreg)
+		: "0"  (sum)
+		: "cbit"
+	);
+	return sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+static inline unsigned short ip_fast_csum(unsigned char * iph,
+					  unsigned int ihl) {
+	unsigned long sum, tmpreg0, tmpreg1;
+
+	__asm__ __volatile__(
+		"	ld	%0, @%1+ \n"
+		"	addi	%2, #-4 \n"
+		"#	bgez	%2, 2f \n"
+		"	cmp	%0, %0 \n"
+		"	ld	%3, @%1+ \n"
+		"	ld	%4, @%1+ \n"
+		"	addx	%0, %3 \n"
+		"	ld	%3, @%1+ \n"
+		"	addx	%0, %4 \n"
+		"	addx	%0, %3 \n"
+		"	.fillinsn\n"
+		"1: \n"
+		"	ld	%4, @%1+ \n"
+		"	addi	%2, #-1 \n"
+		"	addx	%0, %4 \n"
+		"	bgtz	%2, 1b \n"
+		"\n"
+		"	ldi	%3, #0 \n"
+		"	addx	%0, %3 \n"
+		"	.fillinsn\n"
+		"2: \n"
+	/* Since the input registers which are loaded with iph and ipl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1)
+	: "1" (iph), "2" (ihl)
+	: "cbit", "memory");
+
+	return csum_fold(sum);
+}
+
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+					       unsigned long daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       unsigned int sum)
+{
+#if defined(__LITTLE_ENDIAN)
+	unsigned long len_proto = (ntohs(len)<<16)+proto*256;
+#else
+	unsigned long len_proto = (proto<<16)+len;
+#endif
+	unsigned long tmpreg;
+
+	__asm__(
+		"	cmp	%0, %0 \n"
+		"	addx	%0, %2 \n"
+		"	addx	%0, %3 \n"
+		"	addx	%0, %4 \n"
+		"	ldi	%1, #0 \n"
+		"	addx	%0, %1 \n"
+		: "=r" (sum), "=&r" (tmpreg)
+		: "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum)
+		: "cbit"
+	);
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len) {
+	return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						 struct in6_addr *daddr,
+						 __u16 len,
+						 unsigned short proto,
+						 unsigned int sum)
+{
+	unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3;
+	__asm__(
+		"	ld	%1, @(%5) \n"
+		"	ld	%2, @(4,%5) \n"
+		"	ld	%3, @(8,%5) \n"
+		"	ld	%4, @(12,%5) \n"
+		"	add	%0, %1 \n"
+		"	addx	%0, %2 \n"
+		"	addx	%0, %3 \n"
+		"	addx	%0, %4 \n"
+		"	ld	%1, @(%6) \n"
+		"	ld	%2, @(4,%6) \n"
+		"	ld	%3, @(8,%6) \n"
+		"	ld	%4, @(12,%6) \n"
+		"	addx	%0, %1 \n"
+		"	addx	%0, %2 \n"
+		"	addx	%0, %3 \n"
+		"	addx	%0, %4 \n"
+		"	addx	%0, %7 \n"
+		"	addx	%0, %8 \n"
+		"	ldi	%1, #0 \n"
+		"	addx	%0, %1 \n"
+		: "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1),
+		  "=&r" (tmpreg2), "=&r" (tmpreg3)
+		: "r" (saddr), "r" (daddr),
+		  "r" (htonl((__u32) (len))), "r" (htonl(proto)), "0" (sum)
+		: "cbit"
+	);
+
+	return csum_fold(sum);
+}
+
+#endif /* _ASM_M32R_CHECKSUM_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-m32r/cputime.h b/include/asm-m32r/cputime.h
new file mode 100644
index 000000000000..0a47550df2b7
--- /dev/null
+++ b/include/asm-m32r/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M32R_CPUTIME_H
+#define __M32R_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M32R_CPUTIME_H */
diff --git a/include/asm-m32r/current.h b/include/asm-m32r/current.h
new file mode 100644
index 000000000000..c19d927ff22d
--- /dev/null
+++ b/include/asm-m32r/current.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_M32R_CURRENT_H
+#define _ASM_M32R_CURRENT_H
+
+/* $Id$ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current	(get_current())
+
+#endif	/* _ASM_M32R_CURRENT_H */
+
diff --git a/include/asm-m32r/delay.h b/include/asm-m32r/delay.h
new file mode 100644
index 000000000000..f285eaee7d27
--- /dev/null
+++ b/include/asm-m32r/delay.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_M32R_DELAY_H
+#define _ASM_M32R_DELAY_H
+
+/* $Id$ */
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/m32r/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* _ASM_M32R_DELAY_H */
diff --git a/include/asm-m32r/div64.h b/include/asm-m32r/div64.h
new file mode 100644
index 000000000000..417a51bd552d
--- /dev/null
+++ b/include/asm-m32r/div64.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_M32R_DIV64
+#define _ASM_M32R_DIV64
+
+/* $Id$ */
+
+/* unsigned long long division.
+ * Input:
+ *  unsigned long long  n
+ *  unsigned long  base
+ * Output:
+ *  n = n / base;
+ *  return value = n % base;
+ */
+#define do_div(n, base)						\
+({								\
+	unsigned long _res, _high, _mid, _low;			\
+								\
+	_low = (n) & 0xffffffffUL;				\
+	_high = (n) >> 32;					\
+	if (_high) {						\
+		_mid = (_high % (unsigned long)(base)) << 16;	\
+		_high = _high / (unsigned long)(base);		\
+		_mid += _low >> 16;				\
+		_low &= 0x0000ffffUL;				\
+		_low += (_mid % (unsigned long)(base)) << 16;	\
+		_mid = _mid / (unsigned long)(base);		\
+		_res = _low % (unsigned long)(base);		\
+		_low = _low / (unsigned long)(base);		\
+		n = _low + ((long long)_mid << 16) +		\
+			((long long)_high << 32);		\
+	} else {						\
+		_res = _low % (unsigned long)(base);		\
+		n = (_low / (unsigned long)(base));		\
+	}							\
+	_res;							\
+})
+
+#endif  /* _ASM_M32R_DIV64 */
diff --git a/include/asm-m32r/dma-mapping.h b/include/asm-m32r/dma-mapping.h
new file mode 100644
index 000000000000..3a2db28834b6
--- /dev/null
+++ b/include/asm-m32r/dma-mapping.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_M32R_DMA_MAPPING_H
+#define _ASM_M32R_DMA_MAPPING_H
+
+/*
+ * NOTE: Do not include <asm-generic/dma-mapping.h>
+ * Because it requires PCI stuffs, but current M32R don't provide these.
+ */
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   int flag)
+{
+	return (void *)NULL;
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	return;
+}
+
+#endif /* _ASM_M32R_DMA_MAPPING_H */
diff --git a/include/asm-m32r/dma.h b/include/asm-m32r/dma.h
new file mode 100644
index 000000000000..7263b013b67e
--- /dev/null
+++ b/include/asm-m32r/dma.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_M32R_DMA_H
+#define _ASM_M32R_DMA_H
+
+/* $Id$ */
+
+#include <asm/io.h>
+
+/*
+ * The maximum address that we can perform a DMA transfer
+ * to on this platform
+ */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x20000000)
+
+#endif /* _ASM_M32R_DMA_H */
diff --git a/include/asm-m32r/elf.h b/include/asm-m32r/elf.h
new file mode 100644
index 000000000000..bbee8b25d175
--- /dev/null
+++ b/include/asm-m32r/elf.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_M32R__ELF_H
+#define _ASM_M32R__ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1999-2004, Renesas Technology Corp.
+ *      Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/page.h>
+
+/* M32R relocation types  */
+#define	R_M32R_NONE		0
+#define	R_M32R_16		1
+#define	R_M32R_32		2
+#define	R_M32R_24		3
+#define	R_M32R_10_PCREL		4
+#define	R_M32R_18_PCREL		5
+#define	R_M32R_26_PCREL		6
+#define	R_M32R_HI16_ULO		7
+#define	R_M32R_HI16_SLO		8
+#define	R_M32R_LO16		9
+#define	R_M32R_SDA16		10
+#define	R_M32R_GNU_VTINHERIT	11
+#define	R_M32R_GNU_VTENTRY	12
+
+#define R_M32R_16_RELA		33
+#define R_M32R_32_RELA		34
+#define R_M32R_24_RELA		35
+#define R_M32R_10_PCREL_RELA	36
+#define R_M32R_18_PCREL_RELA	37
+#define R_M32R_26_PCREL_RELA	38
+#define R_M32R_HI16_ULO_RELA	39
+#define R_M32R_HI16_SLO_RELA	40
+#define R_M32R_LO16_RELA	41
+#define R_M32R_SDA16_RELA	42
+#define	R_M32R_RELA_GNU_VTINHERIT	43
+#define	R_M32R_RELA_GNU_VTENTRY	44
+
+#define R_M32R_GOT24		48
+#define R_M32R_26_PLTREL	49
+#define R_M32R_COPY		50
+#define R_M32R_GLOB_DAT		51
+#define R_M32R_JMP_SLOT		52
+#define R_M32R_RELATIVE		53
+#define R_M32R_GOTOFF		54
+#define R_M32R_GOTPC24		55
+#define R_M32R_GOT16_HI_ULO	56
+#define R_M32R_GOT16_HI_SLO	57
+#define R_M32R_GOT16_LO		58
+#define R_M32R_GOTPC_HI_ULO	59
+#define R_M32R_GOTPC_HI_SLO	60
+#define R_M32R_GOTPC_LO		61
+#define R_M32R_GOTOFF_HI_ULO	62
+#define R_M32R_GOTOFF_HI_SLO	63
+#define R_M32R_GOTOFF_LO	64
+
+#define R_M32R_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* We have no FP mumumu.  */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#if defined(__LITTLE_ENDIAN)
+#define ELF_DATA	ELFDATA2LSB
+#elif defined(__BIG_ENDIAN)
+#define ELF_DATA	ELFDATA2MSB
+#else
+#error no endian defined
+#endif
+#define ELF_ARCH	EM_M32R
+
+/* r0 is set by ld.so to a pointer to a function which might be
+ * registered using 'atexit'.  This provides a mean for the dynamic
+ * linker to call DT_FINI functions for shared libraries that have
+ * been loaded before the code runs.
+ *
+ * So that we can use the same startup file with static executables,
+ * we start programs with a value of 0 to indicate that there is no
+ * such function.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->r0 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader.  We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+   now struct_user_regs, they are different) */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)  \
+	memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  */
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+#define ELF_PLATFORM	(NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#endif
+
+#endif  /* _ASM_M32R__ELF_H */
diff --git a/include/asm-m32r/errno.h b/include/asm-m32r/errno.h
new file mode 100644
index 000000000000..7a98520194a7
--- /dev/null
+++ b/include/asm-m32r/errno.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_M32R_ERRNO_H
+#define _ASM_M32R_ERRNO_H
+
+/* $Id$ */
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_M32R_ERRNO_H */
+
diff --git a/include/asm-m32r/fcntl.h b/include/asm-m32r/fcntl.h
new file mode 100644
index 000000000000..3e3089572028
--- /dev/null
+++ b/include/asm-m32r/fcntl.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_M32R_FCNTL_H
+#define _ASM_M32R_FCNTL_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif  /* _ASM_M32R_FCNTL_H */
diff --git a/include/asm-m32r/flat.h b/include/asm-m32r/flat.h
new file mode 100644
index 000000000000..1b285f65cab6
--- /dev/null
+++ b/include/asm-m32r/flat.h
@@ -0,0 +1,145 @@
+/*
+ * include/asm-m32r/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2004  Kazuhiro Inaoka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_M32R_FLAT_H
+#define __ASM_M32R_FLAT_H
+
+#define	flat_stack_align(sp)		(*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		\
+	(((reloc) - textlen_for_m32r_lo16_data) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags) \
+	m32r_flat_get_addr_from_rp(rp, relval, (text_len) )
+
+#define flat_put_addr_at_rp(rp, addr, relval) \
+	m32r_flat_put_addr_at_rp(rp, addr, relval)
+
+/* Convert a relocation entry into an address.  */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+        return relval & 0x00ffffff; /* Mask out top 8-bits */
+}
+
+#define	flat_m32r_get_reloc_type(relval)	((relval) >> 24)
+
+#define M32R_SETH_OPCODE	0xd0c00000 /* SETH instruction code */
+
+#define FLAT_M32R_32		0x00	/* 32bits reloc */
+#define FLAT_M32R_24		0x01	/* unsigned 24bits reloc */
+#define FLAT_M32R_16		0x02	/* 16bits reloc */
+#define FLAT_M32R_LO16		0x03	/* signed low 16bits reloc (low()) */
+#define FLAT_M32R_LO16_DATA	0x04	/* signed low 16bits reloc (low())
+					   for a symbol in .data section */
+					/* High 16bits of an address used
+					   when the lower 16bbits are treated
+					   as unsigned.
+                                           To create SETH instruction only.
+					   0x1X: X means a number of register.
+					   0x10 - 0x3F are reserved. */
+#define FLAT_M32R_HI16_ULO	0x10	/* reloc for SETH Rn,#high(imm16) */
+					/* High 16bits of an address used
+					   when the lower 16bbits are treated
+					   as signed.
+                                           To create SETH instruction only.
+					   0x2X: X means a number of register.
+					   0x20 - 0x4F are reserved. */
+#define FLAT_M32R_HI16_SLO	0x20	/* reloc for SETH Rn,#shigh(imm16) */
+
+static unsigned long textlen_for_m32r_lo16_data = 0;
+
+static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp,
+                                                        unsigned long relval,
+						        unsigned long textlen)
+{
+        unsigned int reloc = flat_m32r_get_reloc_type (relval);
+	textlen_for_m32r_lo16_data = 0;
+	if (reloc & 0xf0) {
+		unsigned long addr = htonl(*rp);
+		switch (reloc & 0xf0)
+		{
+		case FLAT_M32R_HI16_ULO:
+		case FLAT_M32R_HI16_SLO:
+			if (addr == 0) {
+				/* put "seth Rn,#0x0" instead of 0 (addr). */
+				*rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24));
+			}
+			return addr;
+		default:
+			break;
+		}
+	} else {
+		switch (reloc)
+		{
+		case FLAT_M32R_LO16:
+			return htonl(*rp) & 0xFFFF;
+		case FLAT_M32R_LO16_DATA:
+                        /* FIXME: The return value will decrease by textlen
+			   at m32r_flat_put_addr_at_rp () */
+			textlen_for_m32r_lo16_data = textlen;
+			return (htonl(*rp) & 0xFFFF) + textlen;
+		case FLAT_M32R_16:
+			return htons(*(unsigned short *)rp) & 0xFFFF;
+		case FLAT_M32R_24:
+			return htonl(*rp) & 0xFFFFFF;
+		case FLAT_M32R_32:
+			return htonl(*rp);
+		default:
+			break;
+		}
+	}
+	return ~0;      /* bogus value */
+}
+
+static inline void m32r_flat_put_addr_at_rp (unsigned long *rp,
+					     unsigned long addr,
+                                             unsigned long relval)
+{
+        unsigned int reloc = flat_m32r_get_reloc_type (relval);
+	if (reloc & 0xf0) {
+		unsigned long Rn = reloc & 0x0f; /* get a number of register */
+		Rn <<= 24; /* 0x0R000000 */
+		reloc &= 0xf0;
+		switch (reloc)
+		{
+		case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */
+			*rp = (M32R_SETH_OPCODE | Rn
+			       | ((addr >> 16) & 0xFFFF));
+			break;
+		case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */
+			*rp = (M32R_SETH_OPCODE | Rn
+			       | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0))
+				  & 0xFFFF));
+			break;
+		}
+	} else {
+		switch (reloc) {
+		case FLAT_M32R_LO16_DATA:
+			addr -= textlen_for_m32r_lo16_data;
+			textlen_for_m32r_lo16_data = 0;
+		case FLAT_M32R_LO16:
+			*rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF);
+			break;
+		case FLAT_M32R_16:
+			*(unsigned short *)rp = addr & 0xFFFF;
+			break;
+		case FLAT_M32R_24:
+			*rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF);
+			break;
+		case FLAT_M32R_32:
+			*rp = addr;
+			break;
+		}
+	}
+}
+
+#endif /* __ASM_M32R_FLAT_H */
diff --git a/include/asm-m32r/hardirq.h b/include/asm-m32r/hardirq.h
new file mode 100644
index 000000000000..5da830ec1587
--- /dev/null
+++ b/include/asm-m32r/hardirq.h
@@ -0,0 +1,37 @@
+#ifdef __KERNEL__
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+	BUG();
+}
+
+#endif /* __ASM_HARDIRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-m32r/hdreg.h b/include/asm-m32r/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-m32r/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-m32r/hw_irq.h b/include/asm-m32r/hw_irq.h
new file mode 100644
index 000000000000..8d7e9d0e09e8
--- /dev/null
+++ b/include/asm-m32r/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_M32R_HW_IRQ_H
+#define _ASM_M32R_HW_IRQ_H
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+	/* Nothing to do */
+}
+
+#endif /* _ASM_M32R_HW_IRQ_H */
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
new file mode 100644
index 000000000000..be64f24e37ee
--- /dev/null
+++ b/include/asm-m32r/ide.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_M32R_IDE_H
+#define _ASM_M32R_IDE_H
+
+/* $Id$ */
+
+/*
+ *  linux/include/asm-m32r/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the i386 architecture specific IDE code.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_BLK_DEV_IDEPCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	2
+# endif
+#endif
+
+#if defined(CONFIG_PLAT_M32700UT)
+#include <asm/irq.h>
+#include <asm/m32700ut/m32700ut_pld.h>
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static __inline__ int ide_default_irq(unsigned long base)
+{
+	switch (base) {
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
+		case 0x1f0: return PLD_IRQ_CFIREQ;
+		default:
+			return 0;
+#else
+		case 0x1f0: return 14;
+		case 0x170: return 15;
+		case 0x1e8: return 11;
+		case 0x168: return 10;
+		case 0x1e0: return 8;
+		case 0x160: return 12;
+		default:
+			return 0;
+#endif
+	}
+}
+
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+	switch (index) {
+		case 0:	return 0x1f0;
+		case 1:	return 0x170;
+		case 2: return 0x1e8;
+		case 3: return 0x168;
+		case 4: return 0x1e0;
+		case 5: return 0x160;
+		default:
+			return 0;
+	}
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_BLK_DEV_IDEPCI
+#define ide_init_default_irq(base)     (0)
+#else
+#define ide_init_default_irq(base)     ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_IDE_H */
diff --git a/include/asm-m32r/io.h b/include/asm-m32r/io.h
new file mode 100644
index 000000000000..8e9e481e6996
--- /dev/null
+++ b/include/asm-m32r/io.h
@@ -0,0 +1,232 @@
+#ifndef _ASM_M32R_IO_H
+#define _ASM_M32R_IO_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <asm/page.h>  /* __va */
+
+#ifdef __KERNEL__
+
+#define IO_SPACE_LIMIT  0xFFFFFFFF
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+extern void __iomem *
+__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+/**
+ *	ioremap		-	map bus memory into CPU space
+ *	@offset:	bus address of the memory
+ *	@size:		size of the resource to map
+ *
+ *	ioremap performs a platform specific sequence of operations to
+ *	make bus memory CPU accessible via the readb/readw/readl/writeb/
+ *	writew/writel functions and the other mmio helpers. The returned
+ *	address is not guaranteed to be usable directly as a virtual
+ *	address.
+ */
+
+static inline void * ioremap(unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, 0);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+#define ioremap_nocache(off,size) ioremap(off,size)
+
+/*
+ * IO bus memory addresses are also 1:1 with the physical address
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_bus	page_to_phys
+#define virt_to_bus	virt_to_phys
+
+extern unsigned char _inb(unsigned long);
+extern unsigned short _inw(unsigned long);
+extern unsigned long _inl(unsigned long);
+extern unsigned char _inb_p(unsigned long);
+extern unsigned short _inw_p(unsigned long);
+extern unsigned long _inl_p(unsigned long);
+extern void _outb(unsigned char, unsigned long);
+extern void _outw(unsigned short, unsigned long);
+extern void _outl(unsigned long, unsigned long);
+extern void _outb_p(unsigned char, unsigned long);
+extern void _outw_p(unsigned short, unsigned long);
+extern void _outl_p(unsigned long, unsigned long);
+extern void _insb(unsigned int, void *, unsigned long);
+extern void _insw(unsigned int, void *, unsigned long);
+extern void _insl(unsigned int, void *, unsigned long);
+extern void _outsb(unsigned int, const void *, unsigned long);
+extern void _outsw(unsigned int, const void *, unsigned long);
+extern void _outsl(unsigned int, const void *, unsigned long);
+
+static inline unsigned char _readb(unsigned long addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short _readw(unsigned long addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned long _readl(unsigned long addr)
+{
+	return *(volatile unsigned long __force *)addr;
+}
+
+static inline void _writeb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char __force *)addr = b;
+}
+
+static inline void _writew(unsigned short w, unsigned long addr)
+{
+	*(volatile unsigned short __force *)addr = w;
+}
+
+static inline void _writel(unsigned long l, unsigned long addr)
+{
+	*(volatile unsigned long __force *)addr = l;
+}
+
+#define inb     _inb
+#define inw     _inw
+#define inl     _inl
+#define outb    _outb
+#define outw    _outw
+#define outl    _outl
+
+#define inb_p   _inb_p
+#define inw_p   _inw_p
+#define inl_p   _inl_p
+#define outb_p  _outb_p
+#define outw_p  _outw_p
+#define outl_p  _outl_p
+
+#define insb    _insb
+#define insw    _insw
+#define insl    _insl
+#define outsb   _outsb
+#define outsw   _outsw
+#define outsl   _outsl
+
+#define readb(addr)   _readb((unsigned long)(addr))
+#define readw(addr)   _readw((unsigned long)(addr))
+#define readl(addr)   _readl((unsigned long)(addr))
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+#define writeb(val, addr)  _writeb((val), (unsigned long)(addr))
+#define writew(val, addr)  _writew((val), (unsigned long)(addr))
+#define writel(val, addr)  _writel((val), (unsigned long)(addr))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define mmiowb()
+
+#define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
+
+/**
+ *	check_signature		-	find BIOS signatures
+ *	@io_addr: mmio address to check
+ *	@signature:  signature block
+ *	@length: length of signature
+ *
+ *	Perform a signature comparison with the ISA mmio address io_addr.
+ *	Returns 1 on a match.
+ *
+ *	This function is deprecated. New drivers should use ioremap and
+ *	check_signature.
+ */
+
+static inline int check_signature(void __iomem *io_addr,
+        const unsigned char *signature, int length)
+{
+        int retval = 0;
+#if 0
+printk("check_signature\n");
+        do {
+                if (readb(io_addr) != *signature)
+                        goto out;
+                io_addr++;
+                signature++;
+                length--;
+        } while (length);
+        retval = 1;
+out:
+#endif
+        return retval;
+}
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif  /* __KERNEL__ */
+
+#endif  /* _ASM_M32R_IO_H */
diff --git a/include/asm-m32r/ioctl.h b/include/asm-m32r/ioctl.h
new file mode 100644
index 000000000000..87d8f7db6af1
--- /dev/null
+++ b/include/asm-m32r/ioctl.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_M32R_IOCTL_H
+#define _ASM_M32R_IOCTL_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_M32R_IOCTL_H */
diff --git a/include/asm-m32r/ioctls.h b/include/asm-m32r/ioctls.h
new file mode 100644
index 000000000000..b3508292246a
--- /dev/null
+++ b/include/asm-m32r/ioctls.h
@@ -0,0 +1,88 @@
+#ifndef __ARCH_M32R_IOCTLS_H__
+#define __ARCH_M32R_IOCTLS_H__
+
+/* $Id$ */
+
+/* orig : i386 2.5.67 */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ARCH_M32R_IOCTLS_H__ */
+
diff --git a/include/asm-m32r/ipc.h b/include/asm-m32r/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-m32r/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-m32r/ipcbuf.h b/include/asm-m32r/ipcbuf.h
new file mode 100644
index 000000000000..7c77fb0b1467
--- /dev/null
+++ b/include/asm-m32r/ipcbuf.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_M32R_IPCBUF_H
+#define _ASM_M32R_IPCBUF_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * The ipc64_perm structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* _ASM_M32R_IPCBUF_H */
diff --git a/include/asm-m32r/irq.h b/include/asm-m32r/irq.h
new file mode 100644
index 000000000000..8ed77968ecb4
--- /dev/null
+++ b/include/asm-m32r/irq.h
@@ -0,0 +1,75 @@
+#ifdef __KERNEL__
+#ifndef _ASM_M32R_IRQ_H
+#define _ASM_M32R_IRQ_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_USRV)
+/*
+ * IRQ definitions for M32700UT
+ *  M32700 Chip: 64 interrupts
+ *  ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ */
+#define	M32700UT_NUM_CPU_IRQ	(64)
+#define M32700UT_NUM_PLD_IRQ	(32)
+#define M32700UT_IRQ_BASE	0
+#define M32700UT_CPU_IRQ_BASE	M32700UT_IRQ_BASE
+#define M32700UT_PLD_IRQ_BASE	(M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
+
+#define NR_IRQS	(M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ)
+#elif defined(CONFIG_PLAT_M32700UT)
+/*
+ * IRQ definitions for M32700UT(Rev.C) + M32R-LAN
+ *  M32700 Chip: 64 interrupts
+ *  ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ *  ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
+ *  ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
+ */
+#define M32700UT_NUM_CPU_IRQ		(64)
+#define M32700UT_NUM_PLD_IRQ		(32)
+#define M32700UT_NUM_LCD_PLD_IRQ	(32)
+#define M32700UT_NUM_LAN_PLD_IRQ	(32)
+#define M32700UT_IRQ_BASE		0
+#define M32700UT_CPU_IRQ_BASE		(M32700UT_IRQ_BASE)
+#define M32700UT_PLD_IRQ_BASE \
+	(M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
+#define M32700UT_LCD_PLD_IRQ_BASE \
+	(M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ)
+#define M32700UT_LAN_PLD_IRQ_BASE \
+	(M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ)
+
+#define NR_IRQS \
+	(M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \
+	+ M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ)
+#elif defined(CONFIG_PLAT_OPSPUT)
+/*
+ * IRQ definitions for OPSPUT + M32R-LAN
+ *  OPSP Chip: 64 interrupts
+ *  ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ *  ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
+ *  ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
+ */
+#define OPSPUT_NUM_CPU_IRQ		(64)
+#define OPSPUT_NUM_PLD_IRQ		(32)
+#define OPSPUT_NUM_LCD_PLD_IRQ	(32)
+#define OPSPUT_NUM_LAN_PLD_IRQ	(32)
+#define OPSPUT_IRQ_BASE		0
+#define OPSPUT_CPU_IRQ_BASE		(OPSPUT_IRQ_BASE)
+#define OPSPUT_PLD_IRQ_BASE \
+	(OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ)
+#define OPSPUT_LCD_PLD_IRQ_BASE \
+	(OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ)
+#define OPSPUT_LAN_PLD_IRQ_BASE \
+	(OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ)
+
+#define NR_IRQS \
+	(OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \
+	+ OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ)
+#else
+#define NR_IRQS	64
+#endif
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif /* _ASM_M32R_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-m32r/kmap_types.h b/include/asm-m32r/kmap_types.h
new file mode 100644
index 000000000000..7429591010b6
--- /dev/null
+++ b/include/asm-m32r/kmap_types.h
@@ -0,0 +1,34 @@
+#ifndef __M32R_KMAP_TYPES_H
+#define __M32R_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* __M32R_KMAP_TYPES_H */
+
diff --git a/include/asm-m32r/linkage.h b/include/asm-m32r/linkage.h
new file mode 100644
index 000000000000..a9fb151cf648
--- /dev/null
+++ b/include/asm-m32r/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN		.balign 4
+#define __ALIGN_STR	".balign 4"
+
+#endif /* __ASM_LINKAGE_H */
diff --git a/include/asm-m32r/local.h b/include/asm-m32r/local.h
new file mode 100644
index 000000000000..def29d095740
--- /dev/null
+++ b/include/asm-m32r/local.h
@@ -0,0 +1,6 @@
+#ifndef __M32R_LOCAL_H
+#define __M32R_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M32R_LOCAL_H */
diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h
new file mode 100644
index 000000000000..b56034026bf8
--- /dev/null
+++ b/include/asm-m32r/m32102.h
@@ -0,0 +1,294 @@
+#ifndef _M32102_H_
+#define _M32102_H_
+
+/*
+ * Renesas M32R 32102 group
+ *
+ * Copyright (c) 2001  Hitoshi Yamamoto
+ * Copyright (c) 2003, 2004  Renesas Technology Corp.
+ */
+
+/*======================================================================*
+ * Special Function Register
+ *======================================================================*/
+#define M32R_SFR_OFFSET  (0x00E00000)  /* 0x00E00000-0x00EFFFFF 1[MB] */
+
+/*
+ * Clock and Power Management registers.
+ */
+#define M32R_CPM_OFFSET          (0x000F4000+M32R_SFR_OFFSET)
+
+#define M32R_CPM_CPUCLKCR_PORTL  (0x00+M32R_CPM_OFFSET)
+#define M32R_CPM_CLKMOD_PORTL    (0x04+M32R_CPM_OFFSET)
+#define M32R_CPM_PLLCR_PORTL     (0x08+M32R_CPM_OFFSET)
+
+/*
+ * DMA Controller registers.
+ */
+#define M32R_DMA_OFFSET		(0x000F8000+M32R_SFR_OFFSET)
+
+#define M32R_DMAEN_PORTL	(0x000+M32R_DMA_OFFSET)
+#define M32R_DMAISTS_PORTL	(0x004+M32R_DMA_OFFSET)
+#define M32R_DMAEDET_PORTL	(0x008+M32R_DMA_OFFSET)
+#define M32R_DMAASTS_PORTL	(0x00c+M32R_DMA_OFFSET)
+
+#define M32R_DMA0CR0_PORTL	(0x100+M32R_DMA_OFFSET)
+#define M32R_DMA0CR1_PORTL	(0x104+M32R_DMA_OFFSET)
+#define M32R_DMA0CSA_PORTL	(0x108+M32R_DMA_OFFSET)
+#define M32R_DMA0RSA_PORTL	(0x10c+M32R_DMA_OFFSET)
+#define M32R_DMA0CDA_PORTL	(0x110+M32R_DMA_OFFSET)
+#define M32R_DMA0RDA_PORTL	(0x114+M32R_DMA_OFFSET)
+#define M32R_DMA0CBCUT_PORTL	(0x118+M32R_DMA_OFFSET)
+#define M32R_DMA0RBCUT_PORTL	(0x11c+M32R_DMA_OFFSET)
+
+#define M32R_DMA1CR0_PORTL	(0x200+M32R_DMA_OFFSET)
+#define M32R_DMA1CR1_PORTL	(0x204+M32R_DMA_OFFSET)
+#define M32R_DMA1CSA_PORTL	(0x208+M32R_DMA_OFFSET)
+#define M32R_DMA1RSA_PORTL	(0x20c+M32R_DMA_OFFSET)
+#define M32R_DMA1CDA_PORTL	(0x210+M32R_DMA_OFFSET)
+#define M32R_DMA1RDA_PORTL	(0x214+M32R_DMA_OFFSET)
+#define M32R_DMA1CBCUT_PORTL	(0x218+M32R_DMA_OFFSET)
+#define M32R_DMA1RBCUT_PORTL	(0x21c+M32R_DMA_OFFSET)
+
+/*
+ * Multi Function Timer registers.
+ */
+#define M32R_MFT_OFFSET        (0x000FC000+M32R_SFR_OFFSET)
+
+#define M32R_MFTCR_PORTL       (0x000+M32R_MFT_OFFSET)  /* MFT control */
+#define M32R_MFTRPR_PORTL      (0x004+M32R_MFT_OFFSET)  /* MFT real port */
+
+#define M32R_MFT0_OFFSET       (0x100+M32R_MFT_OFFSET)
+#define M32R_MFT0MOD_PORTL     (0x00+M32R_MFT0_OFFSET)  /* MFT0 mode */
+#define M32R_MFT0BOS_PORTL     (0x04+M32R_MFT0_OFFSET)  /* MFT0 b-port output status */
+#define M32R_MFT0CUT_PORTL     (0x08+M32R_MFT0_OFFSET)  /* MFT0 count */
+#define M32R_MFT0RLD_PORTL     (0x0C+M32R_MFT0_OFFSET)  /* MFT0 reload */
+#define M32R_MFT0CMPRLD_PORTL  (0x10+M32R_MFT0_OFFSET)  /* MFT0 compare reload */
+
+#define M32R_MFT1_OFFSET       (0x200+M32R_MFT_OFFSET)
+#define M32R_MFT1MOD_PORTL     (0x00+M32R_MFT1_OFFSET)  /* MFT1 mode */
+#define M32R_MFT1BOS_PORTL     (0x04+M32R_MFT1_OFFSET)  /* MFT1 b-port output status */
+#define M32R_MFT1CUT_PORTL     (0x08+M32R_MFT1_OFFSET)  /* MFT1 count */
+#define M32R_MFT1RLD_PORTL     (0x0C+M32R_MFT1_OFFSET)  /* MFT1 reload */
+#define M32R_MFT1CMPRLD_PORTL  (0x10+M32R_MFT1_OFFSET)  /* MFT1 compare reload */
+
+#define M32R_MFT2_OFFSET       (0x300+M32R_MFT_OFFSET)
+#define M32R_MFT2MOD_PORTL     (0x00+M32R_MFT2_OFFSET)  /* MFT2 mode */
+#define M32R_MFT2BOS_PORTL     (0x04+M32R_MFT2_OFFSET)  /* MFT2 b-port output status */
+#define M32R_MFT2CUT_PORTL     (0x08+M32R_MFT2_OFFSET)  /* MFT2 count */
+#define M32R_MFT2RLD_PORTL     (0x0C+M32R_MFT2_OFFSET)  /* MFT2 reload */
+#define M32R_MFT2CMPRLD_PORTL  (0x10+M32R_MFT2_OFFSET)  /* MFT2 compare reload */
+
+#define M32R_MFT3_OFFSET       (0x400+M32R_MFT_OFFSET)
+#define M32R_MFT3MOD_PORTL     (0x00+M32R_MFT3_OFFSET)  /* MFT3 mode */
+#define M32R_MFT3BOS_PORTL     (0x04+M32R_MFT3_OFFSET)  /* MFT3 b-port output status */
+#define M32R_MFT3CUT_PORTL     (0x08+M32R_MFT3_OFFSET)  /* MFT3 count */
+#define M32R_MFT3RLD_PORTL     (0x0C+M32R_MFT3_OFFSET)  /* MFT3 reload */
+#define M32R_MFT3CMPRLD_PORTL  (0x10+M32R_MFT3_OFFSET)  /* MFT3 compare reload */
+
+#define M32R_MFT4_OFFSET       (0x500+M32R_MFT_OFFSET)
+#define M32R_MFT4MOD_PORTL     (0x00+M32R_MFT4_OFFSET)  /* MFT4 mode */
+#define M32R_MFT4BOS_PORTL     (0x04+M32R_MFT4_OFFSET)  /* MFT4 b-port output status */
+#define M32R_MFT4CUT_PORTL     (0x08+M32R_MFT4_OFFSET)  /* MFT4 count */
+#define M32R_MFT4RLD_PORTL     (0x0C+M32R_MFT4_OFFSET)  /* MFT4 reload */
+#define M32R_MFT4CMPRLD_PORTL  (0x10+M32R_MFT4_OFFSET)  /* MFT4 compare reload */
+
+#define M32R_MFT5_OFFSET       (0x600+M32R_MFT_OFFSET)
+#define M32R_MFT5MOD_PORTL     (0x00+M32R_MFT5_OFFSET)  /* MFT4 mode */
+#define M32R_MFT5BOS_PORTL     (0x04+M32R_MFT5_OFFSET)  /* MFT4 b-port output status */
+#define M32R_MFT5CUT_PORTL     (0x08+M32R_MFT5_OFFSET)  /* MFT4 count */
+#define M32R_MFT5RLD_PORTL     (0x0C+M32R_MFT5_OFFSET)  /* MFT4 reload */
+#define M32R_MFT5CMPRLD_PORTL  (0x10+M32R_MFT5_OFFSET)  /* MFT4 compare reload */
+
+#ifdef CONFIG_CHIP_M32700
+#define M32R_MFTCR_MFT0MSK  (1UL<<31)  /* b0 */
+#define M32R_MFTCR_MFT1MSK  (1UL<<30)  /* b1 */
+#define M32R_MFTCR_MFT2MSK  (1UL<<29)  /* b2 */
+#define M32R_MFTCR_MFT3MSK  (1UL<<28)  /* b3 */
+#define M32R_MFTCR_MFT4MSK  (1UL<<27)  /* b4 */
+#define M32R_MFTCR_MFT5MSK  (1UL<<26)  /* b5 */
+#define M32R_MFTCR_MFT0EN   (1UL<<23)  /* b8 */
+#define M32R_MFTCR_MFT1EN   (1UL<<22)  /* b9 */
+#define M32R_MFTCR_MFT2EN   (1UL<<21)  /* b10 */
+#define M32R_MFTCR_MFT3EN   (1UL<<20)  /* b11 */
+#define M32R_MFTCR_MFT4EN   (1UL<<19)  /* b12 */
+#define M32R_MFTCR_MFT5EN   (1UL<<18)  /* b13 */
+#else	/* not CONFIG_CHIP_M32700 */
+#define M32R_MFTCR_MFT0MSK  (1UL<<15)  /* b16 */
+#define M32R_MFTCR_MFT1MSK  (1UL<<14)  /* b17 */
+#define M32R_MFTCR_MFT2MSK  (1UL<<13)  /* b18 */
+#define M32R_MFTCR_MFT3MSK  (1UL<<12)  /* b19 */
+#define M32R_MFTCR_MFT4MSK  (1UL<<11)  /* b20 */
+#define M32R_MFTCR_MFT5MSK  (1UL<<10)  /* b21 */
+#define M32R_MFTCR_MFT0EN   (1UL<<7)   /* b24 */
+#define M32R_MFTCR_MFT1EN   (1UL<<6)   /* b25 */
+#define M32R_MFTCR_MFT2EN   (1UL<<5)   /* b26 */
+#define M32R_MFTCR_MFT3EN   (1UL<<4)   /* b27 */
+#define M32R_MFTCR_MFT4EN   (1UL<<3)   /* b28 */
+#define M32R_MFTCR_MFT5EN   (1UL<<2)   /* b29 */
+#endif	/* not CONFIG_CHIP_M32700 */
+
+#define M32R_MFTMOD_CC_MASK    (1UL<<15)  /* b16 */
+#define M32R_MFTMOD_TCCR       (1UL<<13)  /* b18 */
+#define M32R_MFTMOD_GTSEL000   (0UL<<8)   /* b21-23 : 000 */
+#define M32R_MFTMOD_GTSEL001   (1UL<<8)   /* b21-23 : 001 */
+#define M32R_MFTMOD_GTSEL010   (2UL<<8)   /* b21-23 : 010 */
+#define M32R_MFTMOD_GTSEL011   (3UL<<8)   /* b21-23 : 011 */
+#define M32R_MFTMOD_GTSEL110   (6UL<<8)   /* b21-23 : 110 */
+#define M32R_MFTMOD_GTSEL111   (7UL<<8)   /* b21-23 : 111 */
+#define M32R_MFTMOD_CMSEL      (1UL<<3)   /* b28 */
+#define M32R_MFTMOD_CSSEL000   (0UL<<0)   /* b29-b31 : 000 */
+#define M32R_MFTMOD_CSSEL001   (1UL<<0)   /* b29-b31 : 001 */
+#define M32R_MFTMOD_CSSEL010   (2UL<<0)   /* b29-b31 : 010 */
+#define M32R_MFTMOD_CSSEL011   (3UL<<0)   /* b29-b31 : 011 */
+#define M32R_MFTMOD_CSSEL100   (4UL<<0)   /* b29-b31 : 100 */
+#define M32R_MFTMOD_CSSEL110   (6UL<<0)   /* b29-b31 : 110 */
+
+/*
+ * Serial I/O registers.
+ */
+#define M32R_SIO_OFFSET  (0x000FD000+M32R_SFR_OFFSET)
+
+#define M32R_SIO0_CR_PORTL    (0x000+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD0_PORTL  (0x004+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD1_PORTL  (0x008+M32R_SIO_OFFSET)
+#define M32R_SIO0_STS_PORTL   (0x00C+M32R_SIO_OFFSET)
+#define M32R_SIO0_TRCR_PORTL  (0x010+M32R_SIO_OFFSET)
+#define M32R_SIO0_BAUR_PORTL  (0x014+M32R_SIO_OFFSET)
+#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET)
+#define M32R_SIO0_TXB_PORTL   (0x01C+M32R_SIO_OFFSET)
+#define M32R_SIO0_RXB_PORTL   (0x020+M32R_SIO_OFFSET)
+
+/*
+ * Interrupt Control Unit registers.
+ */
+#define M32R_ICU_OFFSET       (0x000FF000+M32R_SFR_OFFSET)
+#define M32R_ICU_ISTS_PORTL   (0x004+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ0_PORTL  (0x008+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ1_PORTL  (0x00C+M32R_ICU_OFFSET)
+#define M32R_ICU_SBICR_PORTL  (0x018+M32R_ICU_OFFSET)
+#define M32R_ICU_IMASK_PORTL  (0x01C+M32R_ICU_OFFSET)
+#define M32R_ICU_CR1_PORTL    (0x200+M32R_ICU_OFFSET)  /* INT0 */
+#define M32R_ICU_CR2_PORTL    (0x204+M32R_ICU_OFFSET)  /* INT1 */
+#define M32R_ICU_CR3_PORTL    (0x208+M32R_ICU_OFFSET)  /* INT2 */
+#define M32R_ICU_CR4_PORTL    (0x20C+M32R_ICU_OFFSET)  /* INT3 */
+#define M32R_ICU_CR5_PORTL    (0x210+M32R_ICU_OFFSET)  /* INT4 */
+#define M32R_ICU_CR6_PORTL    (0x214+M32R_ICU_OFFSET)  /* INT5 */
+#define M32R_ICU_CR7_PORTL    (0x218+M32R_ICU_OFFSET)  /* INT6 */
+#define M32R_ICU_CR16_PORTL   (0x23C+M32R_ICU_OFFSET)  /* MFT0 */
+#define M32R_ICU_CR17_PORTL   (0x240+M32R_ICU_OFFSET)  /* MFT1 */
+#define M32R_ICU_CR18_PORTL   (0x244+M32R_ICU_OFFSET)  /* MFT2 */
+#define M32R_ICU_CR19_PORTL   (0x248+M32R_ICU_OFFSET)  /* MFT3 */
+#define M32R_ICU_CR20_PORTL   (0x24C+M32R_ICU_OFFSET)  /* MFT4 */
+#define M32R_ICU_CR21_PORTL   (0x250+M32R_ICU_OFFSET)  /* MFT5 */
+#define M32R_ICU_CR32_PORTL   (0x27C+M32R_ICU_OFFSET)  /* DMA0 */
+#define M32R_ICU_CR33_PORTL   (0x280+M32R_ICU_OFFSET)  /* DMA1 */
+#define M32R_ICU_CR48_PORTL   (0x2BC+M32R_ICU_OFFSET)  /* SIO0 */
+#define M32R_ICU_CR49_PORTL   (0x2C0+M32R_ICU_OFFSET)  /* SIO0 */
+#define M32R_ICU_CR50_PORTL   (0x2C4+M32R_ICU_OFFSET)  /* SIO1 */
+#define M32R_ICU_CR51_PORTL   (0x2C8+M32R_ICU_OFFSET)  /* SIO1 */
+#define M32R_ICU_CR52_PORTL   (0x2CC+M32R_ICU_OFFSET)  /* SIO2 */
+#define M32R_ICU_CR53_PORTL   (0x2D0+M32R_ICU_OFFSET)  /* SIO2 */
+#define M32R_ICU_CR54_PORTL   (0x2D4+M32R_ICU_OFFSET)  /* SIO3 */
+#define M32R_ICU_CR55_PORTL   (0x2D8+M32R_ICU_OFFSET)  /* SIO3 */
+#define M32R_ICU_CR56_PORTL   (0x2DC+M32R_ICU_OFFSET)  /* SIO4 */
+#define M32R_ICU_CR57_PORTL   (0x2E0+M32R_ICU_OFFSET)  /* SIO4 */
+
+#ifdef CONFIG_SMP
+#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET)  /* IPI0 */
+#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET)  /* IPI1 */
+#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET)  /* IPI2 */
+#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET)  /* IPI3 */
+#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET)  /* IPI4 */
+#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET)  /* IPI5 */
+#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET)  /* IPI6 */
+#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET)  /* IPI7 */
+#endif /* CONFIG_SMP */
+
+#define M32R_ICUIMASK_IMSK0  (0UL<<16)  /* b13-b15: Disable interrupt */
+#define M32R_ICUIMASK_IMSK1  (1UL<<16)  /* b13-b15: Enable level 0 interrupt */
+#define M32R_ICUIMASK_IMSK2  (2UL<<16)  /* b13-b15: Enable level 0,1 interrupt */
+#define M32R_ICUIMASK_IMSK3  (3UL<<16)  /* b13-b15: Enable level 0-2 interrupt */
+#define M32R_ICUIMASK_IMSK4  (4UL<<16)  /* b13-b15: Enable level 0-3 interrupt */
+#define M32R_ICUIMASK_IMSK5  (5UL<<16)  /* b13-b15: Enable level 0-4 interrupt */
+#define M32R_ICUIMASK_IMSK6  (6UL<<16)  /* b13-b15: Enable level 0-5 interrupt */
+#define M32R_ICUIMASK_IMSK7  (7UL<<16)  /* b13-b15: Enable level 0-6 interrupt */
+
+#define M32R_ICUCR_IEN      (1UL<<12)  /* b19: Interrupt enable */
+#define M32R_ICUCR_IRQ      (1UL<<8)   /* b23: Interrupt request */
+#define M32R_ICUCR_ISMOD00  (0UL<<4)   /* b26-b27: Interrupt sense mode Edge HtoL */
+#define M32R_ICUCR_ISMOD01  (1UL<<4)   /* b26-b27: Interrupt sense mode Level L */
+#define M32R_ICUCR_ISMOD10  (2UL<<4)   /* b26-b27: Interrupt sense mode Edge LtoH*/
+#define M32R_ICUCR_ISMOD11  (3UL<<4)   /* b26-b27: Interrupt sense mode Level H */
+#define M32R_ICUCR_ILEVEL0  (0UL<<0)   /* b29-b31: Interrupt priority level 0 */
+#define M32R_ICUCR_ILEVEL1  (1UL<<0)   /* b29-b31: Interrupt priority level 1 */
+#define M32R_ICUCR_ILEVEL2  (2UL<<0)   /* b29-b31: Interrupt priority level 2 */
+#define M32R_ICUCR_ILEVEL3  (3UL<<0)   /* b29-b31: Interrupt priority level 3 */
+#define M32R_ICUCR_ILEVEL4  (4UL<<0)   /* b29-b31: Interrupt priority level 4 */
+#define M32R_ICUCR_ILEVEL5  (5UL<<0)   /* b29-b31: Interrupt priority level 5 */
+#define M32R_ICUCR_ILEVEL6  (6UL<<0)   /* b29-b31: Interrupt priority level 6 */
+#define M32R_ICUCR_ILEVEL7  (7UL<<0)   /* b29-b31: Disable interrupt */
+
+#define M32R_IRQ_INT0    (1)   /* INT0 */
+#define M32R_IRQ_INT1    (2)   /* INT1 */
+#define M32R_IRQ_INT2    (3)   /* INT2 */
+#define M32R_IRQ_INT3    (4)   /* INT3 */
+#define M32R_IRQ_INT4    (5)   /* INT4 */
+#define M32R_IRQ_INT5    (6)   /* INT5 */
+#define M32R_IRQ_INT6    (7)   /* INT6 */
+#define M32R_IRQ_MFT0    (16)  /* MFT0 */
+#define M32R_IRQ_MFT1    (17)  /* MFT1 */
+#define M32R_IRQ_MFT2    (18)  /* MFT2 */
+#define M32R_IRQ_MFT3    (19)  /* MFT3 */
+#define M32R_IRQ_MFT4    (20)  /* MFT4 */
+#define M32R_IRQ_MFT5    (21)  /* MFT5 */
+#define M32R_IRQ_DMA0    (32)  /* DMA0 */
+#define M32R_IRQ_DMA1    (33)  /* DMA1 */
+#define M32R_IRQ_SIO0_R  (48)  /* SIO0 send    */
+#define M32R_IRQ_SIO0_S  (49)  /* SIO0 receive */
+#define M32R_IRQ_SIO1_R  (50)  /* SIO1 send    */
+#define M32R_IRQ_SIO1_S  (51)  /* SIO1 receive */
+#define M32R_IRQ_SIO2_R  (52)  /* SIO2 send    */
+#define M32R_IRQ_SIO2_S  (53)  /* SIO2 receive */
+#define M32R_IRQ_SIO3_R  (54)  /* SIO3 send    */
+#define M32R_IRQ_SIO3_S  (55)  /* SIO3 receive */
+#define M32R_IRQ_SIO4_R  (56)  /* SIO4 send    */
+#define M32R_IRQ_SIO4_S  (57)  /* SIO4 receive */
+
+#ifdef CONFIG_SMP
+#define M32R_IRQ_IPI0    (56)
+#define M32R_IRQ_IPI1    (57)
+#define M32R_IRQ_IPI2    (58)
+#define M32R_IRQ_IPI3    (59)
+#define M32R_IRQ_IPI4    (60)
+#define M32R_IRQ_IPI5    (61)
+#define M32R_IRQ_IPI6    (62)
+#define M32R_IRQ_IPI7    (63)
+#define M32R_CPUID_PORTL (0xffffffe0)
+
+#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET)
+
+#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME0_PORTL   (0x10+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME1_PORTL   (0x14+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME2_PORTL   (0x18+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME3_PORTL   (0x1c+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID0_PORTL   (0x20+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID1_PORTL   (0x24+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID2_PORTL   (0x28+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID3_PORTL   (0x2c+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION0_PORTL    (0x30+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION1_PORTL    (0x34+M32R_FPGA_TOP)
+
+#ifndef __ASSEMBLY__
+/* For NETDEV WATCHDOG */
+typedef struct {
+	unsigned long icucr;	/* ICU Control Register */
+} icu_data_t;
+
+extern icu_data_t icu_data[];
+#endif
+
+#endif /* CONFIG_SMP */
+
+#endif /* _M32102_H_ */
diff --git a/include/asm-m32r/m32102peri.h b/include/asm-m32r/m32102peri.h
new file mode 100644
index 000000000000..3c12955ad0f0
--- /dev/null
+++ b/include/asm-m32r/m32102peri.h
@@ -0,0 +1,468 @@
+/* $Id$
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000,2001 by Hiroyuki Kondo
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef	void	V;
+typedef	char	B;
+typedef	short	S;
+typedef	int		W;
+typedef	long	L;
+typedef	float	F;
+typedef	double	D;
+typedef	unsigned char	UB;
+typedef	unsigned short	US;
+typedef	unsigned int	UW;
+typedef	unsigned long	UL;
+typedef	const unsigned int	CUW;
+
+/*********************************
+
+M32102 ICU
+
+*********************************/
+#define		ICUISTS		(UW *)0xa0EFF004
+#define		ICUIREQ0	(UW *)0xa0EFF008
+#define		ICUIREQ1	(UW *)0xa0EFF00C
+
+#define		ICUSBICR	(UW *)0xa0EFF018
+#define		ICUIMASK	(UW *)0xa0EFF01C
+
+#define		ICUCR1		(UW *)0xa0EFF200	/* INT0 */
+#define		ICUCR2		(UW *)0xa0EFF204	/* INT1 */
+#define		ICUCR3		(UW *)0xa0EFF208	/* INT2 */
+#define		ICUCR4		(UW *)0xa0EFF20C	/* INT3 */
+#define		ICUCR5		(UW *)0xa0EFF210	/* INT4 */
+#define		ICUCR6		(UW *)0xa0EFF214	/* INT5 */
+#define		ICUCR7		(UW *)0xa0EFF218	/* INT6 */
+
+#define		ICUCR16		(UW *)0xa0EFF23C	/* MFT0 */
+#define		ICUCR17		(UW *)0xa0EFF240	/* MFT1 */
+#define		ICUCR18		(UW *)0xa0EFF244	/* MFT2 */
+#define		ICUCR19		(UW *)0xa0EFF248	/* MFT3 */
+#define		ICUCR20		(UW *)0xa0EFF24C	/* MFT4 */
+#define		ICUCR21		(UW *)0xa0EFF250	/* MFT5 */
+
+#define		ICUCR32		(UW *)0xa0EFF27C	/* DMA0 */
+#define		ICUCR33		(UW *)0xa0EFF280	/* DMA1 */
+
+#define		ICUCR48		(UW *)0xa0EFF2BC	/* SIO0R */
+#define		ICUCR49		(UW *)0xa0EFF2C0	/* SIO0S */
+#define		ICUCR50		(UW *)0xa0EFF2C4	/* SIO1R */
+#define		ICUCR51		(UW *)0xa0EFF2C8	/* SIO1S */
+#define		ICUCR52		(UW *)0xa0EFF2CC	/* SIO2R */
+#define		ICUCR53		(UW *)0xa0EFF2D0	/* SIO2S */
+#define		ICUCR54		(UW *)0xa0EFF2D4	/* SIO3R */
+#define		ICUCR55		(UW *)0xa0EFF2D8	/* SIO3S */
+#define		ICUCR56		(UW *)0xa0EFF2DC	/* SIO4R */
+#define		ICUCR57		(UW *)0xa0EFF2E0	/* SIO4S */
+
+/*********************************
+
+M32102 MFT
+
+*********************************/
+#define		MFTCR		(US *)0xa0EFC002
+#define		MFTRPR		(UB *)0xa0EFC006
+
+#define		MFT0MOD		(US *)0xa0EFC102
+#define		MFT0BOS		(US *)0xa0EFC106
+#define		MFT0CUT		(US *)0xa0EFC10A
+#define		MFT0RLD		(US *)0xa0EFC10E
+#define		MFT0CRLD	(US *)0xa0EFC112
+
+#define		MFT1MOD		(US *)0xa0EFC202
+#define		MFT1BOS		(US *)0xa0EFC206
+#define		MFT1CUT		(US *)0xa0EFC20A
+#define		MFT1RLD		(US *)0xa0EFC20E
+#define		MFT1CRLD	(US *)0xa0EFC212
+
+#define		MFT2MOD		(US *)0xa0EFC302
+#define		MFT2BOS		(US *)0xa0EFC306
+#define		MFT2CUT		(US *)0xa0EFC30A
+#define		MFT2RLD		(US *)0xa0EFC30E
+#define		MFT2CRLD	(US *)0xa0EFC312
+
+#define		MFT3MOD		(US *)0xa0EFC402
+#define		MFT3CUT		(US *)0xa0EFC40A
+#define		MFT3RLD		(US *)0xa0EFC40E
+#define		MFT3CRLD	(US *)0xa0EFC412
+
+#define		MFT4MOD		(US *)0xa0EFC502
+#define		MFT4CUT		(US *)0xa0EFC50A
+#define		MFT4RLD		(US *)0xa0EFC50E
+#define		MFT4CRLD	(US *)0xa0EFC512
+
+#define		MFT5MOD		(US *)0xa0EFC602
+#define		MFT5CUT		(US *)0xa0EFC60A
+#define		MFT5RLD		(US *)0xa0EFC60E
+#define		MFT5CRLD	(US *)0xa0EFC612
+
+/*********************************
+
+M32102 SIO
+
+*********************************/
+
+#define SIO0CR     (volatile int *)0xa0efd000
+#define SIO0MOD0   (volatile int *)0xa0efd004
+#define SIO0MOD1   (volatile int *)0xa0efd008
+#define SIO0STS    (volatile int *)0xa0efd00c
+#define SIO0IMASK  (volatile int *)0xa0efd010
+#define SIO0BAUR   (volatile int *)0xa0efd014
+#define SIO0RBAUR  (volatile int *)0xa0efd018
+#define SIO0TXB    (volatile int *)0xa0efd01c
+#define SIO0RXB    (volatile int *)0xa0efd020
+
+#define SIO1CR     (volatile int *)0xa0efd100
+#define SIO1MOD0   (volatile int *)0xa0efd104
+#define SIO1MOD1   (volatile int *)0xa0efd108
+#define SIO1STS    (volatile int *)0xa0efd10c
+#define SIO1IMASK  (volatile int *)0xa0efd110
+#define SIO1BAUR   (volatile int *)0xa0efd114
+#define SIO1RBAUR  (volatile int *)0xa0efd118
+#define SIO1TXB    (volatile int *)0xa0efd11c
+#define SIO1RXB    (volatile int *)0xa0efd120
+/*********************************
+
+M32102 PORT
+
+*********************************/
+#define		PIEN		(UB *)0xa0EF1003	/* input enable */
+
+#define		P0DATA		(UB *)0xa0EF1020	/* data */
+#define		P1DATA		(UB *)0xa0EF1021
+#define		P2DATA		(UB *)0xa0EF1022
+#define		P3DATA		(UB *)0xa0EF1023
+#define		P4DATA		(UB *)0xa0EF1024
+#define		P5DATA		(UB *)0xa0EF1025
+#define		P6DATA		(UB *)0xa0EF1026
+#define		P7DATA		(UB *)0xa0EF1027
+
+#define		P0DIR		(UB *)0xa0EF1040	/* direction */
+#define		P1DIR		(UB *)0xa0EF1041
+#define		P2DIR		(UB *)0xa0EF1042
+#define		P3DIR		(UB *)0xa0EF1043
+#define		P4DIR		(UB *)0xa0EF1044
+#define		P5DIR		(UB *)0xa0EF1045
+#define		P6DIR		(UB *)0xa0EF1046
+#define		P7DIR		(UB *)0xa0EF1047
+
+#define		P0MOD		(US *)0xa0EF1060	/* mode control */
+#define		P1MOD		(US *)0xa0EF1062
+#define		P2MOD		(US *)0xa0EF1064
+#define		P3MOD		(US *)0xa0EF1066
+#define		P4MOD		(US *)0xa0EF1068
+#define		P5MOD		(US *)0xa0EF106A
+#define		P6MOD		(US *)0xa0EF106C
+#define		P7MOD		(US *)0xa0EF106E
+
+#define		P0ODCR		(UB *)0xa0EF1080	/* open-drain control */
+#define		P1ODCR		(UB *)0xa0EF1081
+#define		P2ODCR		(UB *)0xa0EF1082
+#define		P3ODCR		(UB *)0xa0EF1083
+#define		P4ODCR		(UB *)0xa0EF1084
+#define		P5ODCR		(UB *)0xa0EF1085
+#define		P6ODCR		(UB *)0xa0EF1086
+#define		P7ODCR		(UB *)0xa0EF1087
+
+/*********************************
+
+M32102 Cache
+
+********************************/
+
+#define		MCCR	(US *)0xFFFFFFFE
+
+
+#else  /* __ASSEMBLY__ */
+
+;;
+;; PIO     0x80ef1000
+;;
+
+#define PIEN          0xa0ef1000
+
+#define P0DATA        0xa0ef1020
+#define P1DATA        0xa0ef1021
+#define P2DATA        0xa0ef1022
+#define P3DATA        0xa0ef1023
+#define P4DATA        0xa0ef1024
+#define P5DATA        0xa0ef1025
+#define P6DATA        0xa0ef1026
+#define P7DATA        0xa0ef1027
+
+#define P0DIR         0xa0ef1040
+#define P1DIR         0xa0ef1041
+#define P2DIR         0xa0ef1042
+#define P3DIR         0xa0ef1043
+#define P4DIR         0xa0ef1044
+#define P5DIR         0xa0ef1045
+#define P6DIR         0xa0ef1046
+#define P7DIR         0xa0ef1047
+
+#define P0MOD         0xa0ef1060
+#define P1MOD         0xa0ef1062
+#define P2MOD         0xa0ef1064
+#define P3MOD         0xa0ef1066
+#define P4MOD         0xa0ef1068
+#define P5MOD         0xa0ef106a
+#define P6MOD         0xa0ef106c
+#define P7MOD         0xa0ef106e
+;
+#define P0ODCR        0xa0ef1080
+#define P1ODCR        0xa0ef1081
+#define P2ODCR        0xa0ef1082
+#define P3ODCR        0xa0ef1083
+#define P4ODCR        0xa0ef1084
+#define P5ODCR        0xa0ef1085
+#define P6ODCR        0xa0ef1086
+#define P7ODCR        0xa0ef1087
+
+;;
+;; WDT     0xa0ef2000
+;;
+
+#define WDTCR         0xa0ef2000
+
+
+;;
+;; CLK     0xa0ef4000
+;;
+
+#define CPUCLKCR      0xa0ef4000
+#define CLKMOD        0xa0ef4004
+#define PLLCR         0xa0ef4008
+
+
+;;
+;; BSEL    0xa0ef5000
+;;
+
+#define BSEL0CR       0xa0ef5000
+#define BSEL1CR       0xa0ef5004
+#define BSEL2CR       0xa0ef5008
+#define BSEL3CR       0xa0ef500c
+#define BSEL4CR       0xa0ef5010
+#define BSEL5CR       0xa0ef5014
+
+
+;;
+;; SDRAMC  0xa0ef6000
+;;
+
+#define SDRF0         0xa0ef6000
+#define SDRF1         0xa0ef6004
+#define SDIR0         0xa0ef6008
+#define SDIR1         0xa0ef600c
+#define SDBR          0xa0ef6010
+
+;; CH0
+#define SD0ADR        0xa0ef6020
+#define SD0SZ         0xa0ef6022
+#define SD0ER         0xa0ef6024
+#define SD0TR         0xa0ef6028
+#define SD0MOD        0xa0ef602c
+
+;; CH1
+#define SD1ADR        0xa0ef6040
+#define SD1SZ         0xa0ef6042
+#define SD1ER         0xa0ef6044
+#define SD1TR         0xa0ef6048
+#define SD1MOD        0xa0ef604c
+
+
+;;
+;; DMAC    0xa0ef8000
+;;
+
+#define DMAEN         0xa0ef8000
+#define DMAISTS       0xa0ef8004
+#define DMAEDET       0xa0ef8008
+#define DMAASTS       0xa0ef800c
+
+;; CH0
+#define DMA0CR0       0xa0ef8100
+#define DMA0CR1       0xa0ef8104
+#define DMA0CSA       0xa0ef8108
+#define DMA0RSA       0xa0ef810c
+#define DMA0CDA       0xa0ef8110
+#define DMA0RDA       0xa0ef8114
+#define DMA0CBCUT     0xa0ef8118
+#define DMA0RBCUT     0xa0ef811c
+
+;; CH1
+#define DMA1CR0       0xa0ef8200
+#define DMA1CR1       0xa0ef8204
+#define DMA1CSA       0xa0ef8208
+#define DMA1RSA       0xa0ef820c
+#define DMA1CDA       0xa0ef8210
+#define DMA1RDA       0xa0ef8214
+#define DMA1CBCUT     0xa0ef8218
+#define DMA1RBCUT     0xa0ef821c
+
+
+;;
+;; MFT     0xa0efc000
+;;
+
+#define MFTCR        0xa0efc000
+#define MFTRPR       0xa0efc004
+
+;; CH0
+#define MFT0MOD      0xa0efc100
+#define MFT0BOS      0xa0efc104
+#define MFT0CUT      0xa0efc108
+#define MFT0RLD      0xa0efc10c
+#define MFT0CMPRLD   0xa0efc110
+
+;; CH1
+#define MFT1MOD      0xa0efc200
+#define MFT1BOS      0xa0efc204
+#define MFT1CUT      0xa0efc208
+#define MFT1RLD      0xa0efc20c
+#define MFT1CMPRLD   0xa0efc210
+
+;; CH2
+#define MFT2MOD      0xa0efc300
+#define MFT2BOS      0xa0efc304
+#define MFT2CUT      0xa0efc308
+#define MFT2RLD      0xa0efc30c
+#define MFT2CMPRLD   0xa0efc310
+
+;; CH3
+#define MFT3MOD      0xa0efc400
+#define MFT3BOS      0xa0efc404
+#define MFT3CUT      0xa0efc408
+#define MFT3RLD      0xa0efc40c
+#define MFT3CMPRLD   0xa0efc410
+
+;; CH4
+#define MFT4MOD      0xa0efc500
+#define MFT4BOS      0xa0efc504
+#define MFT4CUT      0xa0efc508
+#define MFT4RLD      0xa0efc50c
+#define MFT4CMPRLD   0xa0efc510
+
+;; CH5
+#define MFT5MOD      0xa0efc600
+#define MFT5BOS      0xa0efc604
+#define MFT5CUT      0xa0efc608
+#define MFT5RLD      0xa0efc60c
+#define MFT5CMPRLD   0xa0efc610
+
+
+;;
+;; SIO     0xa0efd000
+;;
+
+;; CH0
+#define SIO0CR        0xa0efd000
+#define SIO0MOD0      0xa0efd004
+#define SIO0MOD1      0xa0efd008
+#define SIO0STS       0xa0efd00c
+#define SIO0IMASK     0xa0efd010
+#define SIO0BAUR      0xa0efd014
+#define SIO0RBAUR     0xa0efd018
+#define SIO0TXB       0xa0efd01c
+#define SIO0RXB       0xa0efd020
+
+;; CH1
+#define SIO1CR        0xa0efd100
+#define SIO1MOD0      0xa0efd104
+#define SIO1MOD1      0xa0efd108
+#define SIO1STS       0xa0efd10c
+#define SIO1IMASK     0xa0efd110
+#define SIO1BAUR      0xa0efd114
+#define SIO1RBAUR     0xa0efd118
+#define SIO1TXB       0xa0efd11c
+#define SIO1RXB       0xa0efd120
+
+;; CH2
+#define SIO2CR        0xa0efd200
+#define SIO2MOD0      0xa0efd204
+#define SIO2MOD1      0xa0efd208
+#define SIO2STS       0xa0efd20c
+#define SIO2IMASK     0xa0efd210
+#define SIO2BAUR      0xa0efd214
+#define SIO2RBAUR     0xa0efd218
+#define SIO2TXB       0xa0efd21c
+#define SIO2RXB       0xa0efd220
+
+;; CH3
+#define SIO3CR        0xa0efd300
+#define SIO3MOD0      0xa0efd304
+#define SIO3MOD1      0xa0efd308
+#define SIO3STS       0xa0efd30c
+#define SIO3IMASK     0xa0efd310
+#define SIO3BAUR      0xa0efd314
+#define SIO3RBAUR     0xa0efd318
+#define SIO3TXB       0xa0efd31c
+#define SIO3RXB       0xa0efd320
+
+;; CH4
+#define SIO4CR        0xa0efd400
+#define SIO4MOD0      0xa0efd404
+#define SIO4MOD1      0xa0efd408
+#define SIO4STS       0xa0efd40c
+#define SIO4IMASK     0xa0efd410
+#define SIO4BAUR      0xa0efd414
+#define SIO4RBAUR     0xa0efd418
+#define SIO4TXB       0xa0efd41c
+#define SIO4RXB       0xa0efd420
+
+
+;;
+;; ICU     0xa0eff000
+;;
+
+#define ICUISTS       0xa0eff004
+#define ICUIREQ0      0xa0eff008
+#define ICUIREQ1      0xa0eff00c
+
+#define ICUSBICR      0xa0eff018
+#define ICUIMASK      0xa0eff01c
+
+#define ICUCR1        0xa0eff200
+#define ICUCR2        0xa0eff204
+#define ICUCR3        0xa0eff208
+#define ICUCR4        0xa0eff20c
+#define ICUCR5        0xa0eff210
+#define ICUCR6        0xa0eff214
+#define ICUCR7        0xa0eff218
+
+#define ICUCR16       0xa0eff23c
+#define ICUCR17       0xa0eff240
+#define ICUCR18       0xa0eff244
+#define ICUCR19       0xa0eff248
+#define ICUCR20       0xa0eff24c
+#define ICUCR21       0xa0eff250
+
+#define ICUCR32       0xa0eff27c
+#define ICUCR33       0xa0eff280
+
+#define ICUCR48       0xa0eff2bc
+#define ICUCR49       0xa0eff2c0
+#define ICUCR50       0xa0eff2c4
+#define ICUCR51       0xa0eff2c8
+#define ICUCR52       0xa0eff2cc
+#define ICUCR53       0xa0eff2d0
+#define ICUCR54       0xa0eff2d4
+#define ICUCR55       0xa0eff2d8
+#define ICUCR56       0xa0eff2dc
+#define ICUCR57       0xa0eff2e0
+
+;;
+;; CACHE
+;;
+
+#define MCCR		  0xfffffffc
+
+
+#endif  /* __ASSEMBLY__ */
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/include/asm-m32r/m32700ut/m32700ut_lan.h
new file mode 100644
index 000000000000..50545ec9c42c
--- /dev/null
+++ b/include/asm-m32r/m32700ut/m32700ut_lan.h
@@ -0,0 +1,107 @@
+/*
+ * include/asm/m32700ut_lan.h
+ *
+ * M32700UT-LAN board
+ *
+ * Copyright (c) 2002	Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id$
+ */
+
+#ifndef _M32700UT_M32700UT_LAN_H
+#define _M32700UT_M32700UT_LAN_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define M32700UT_LAN_BASE	(0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define M32700UT_LAN_BASE	(0x10000000 + NONCACHE_OFFSET)
+#endif	/* __ASSEMBLY__ */
+
+/* ICU
+ *  ICUISTS:	status register
+ *  ICUIREQ0: 	request register
+ *  ICUIREQ1: 	request register
+ *  ICUCR3:	control register for CFIREQ# interrupt
+ *  ICUCR4:	control register for CFC Card insert interrupt
+ *  ICUCR5:	control register for CFC Card eject interrupt
+ *  ICUCR6:	control register for external interrupt
+ *  ICUCR11:	control register for MMC Card insert/eject interrupt
+ *  ICUCR13:	control register for SC error interrupt
+ *  ICUCR14:	control register for SC receive interrupt
+ *  ICUCR15:	control register for SC send interrupt
+ *  ICUCR16:	control register for SIO0 receive interrupt
+ *  ICUCR17:	control register for SIO0 send interrupt
+ */
+#define M32700UT_LAN_IRQ_LAN	(M32700UT_LAN_PLD_IRQ_BASE + 1)	/* LAN */
+#define M32700UT_LAN_IRQ_I2C	(M32700UT_LAN_PLD_IRQ_BASE + 3)	/* I2C */
+
+#define M32700UT_LAN_ICUISTS	__reg16(M32700UT_LAN_BASE + 0xc0002)
+#define M32700UT_LAN_ICUISTS_VECB_MASK	(0xf000)
+#define M32700UT_LAN_VECB(x)	((x) & M32700UT_LAN_ICUISTS_VECB_MASK)
+#define M32700UT_LAN_ICUISTS_ISN_MASK	(0x07c0)
+#define M32700UT_LAN_ICUISTS_ISN(x)	((x) & M32700UT_LAN_ICUISTS_ISN_MASK)
+#define M32700UT_LAN_ICUIREQ0	__reg16(M32700UT_LAN_BASE + 0xc0004)
+#define M32700UT_LAN_ICUCR1	__reg16(M32700UT_LAN_BASE + 0xc0010)
+#define M32700UT_LAN_ICUCR3	__reg16(M32700UT_LAN_BASE + 0xc0014)
+
+/*
+ * AR register on PLD
+ */
+#define ARVCR0		__reg32(M32700UT_LAN_BASE + 0x40000)
+#define ARVCR0_VDS		0x00080000
+#define ARVCR0_RST		0x00010000
+#define ARVCR1		__reg32(M32700UT_LAN_BASE + 0x40004)
+#define ARVCR1_QVGA		0x02000000
+#define ARVCR1_NORMAL		0x01000000
+#define ARVCR1_HIEN		0x00010000
+#define ARVHCOUNT	__reg32(M32700UT_LAN_BASE + 0x40008)
+#define ARDATA		__reg32(M32700UT_LAN_BASE + 0x40010)
+#define ARINTSEL	__reg32(M32700UT_LAN_BASE + 0x40014)
+#define ARINTSEL_INT3		0x10000000	/* CPU INT3 */
+#define ARDATA32	__reg32(M32700UT_LAN_BASE + 0x04040010)	// Block 5
+/*
+#define ARINTSEL_SEL2		0x00002000
+#define ARINTSEL_SEL3		0x00001000
+#define ARINTSEL_SEL6		0x00000200
+#define ARINTSEL_SEL7		0x00000100
+#define ARINTSEL_SEL9		0x00000040
+#define ARINTSEL_SEL10		0x00000020
+#define ARINTSEL_SEL11		0x00000010
+#define ARINTSEL_SEL12		0x00000008
+*/
+
+/*
+ * I2C register on PLD
+ */
+#define PLDI2CCR	__reg32(M32700UT_LAN_BASE + 0x40040)
+#define	PLDI2CCR_ES0		0x00000001	/* enable I2C interface */
+#define PLDI2CMOD	__reg32(M32700UT_LAN_BASE + 0x40044)
+#define PLDI2CMOD_ACKCLK	0x00000200
+#define PLDI2CMOD_DTWD		0x00000100
+#define PLDI2CMOD_10BT		0x00000004
+#define PLDI2CMOD_ATM_NORMAL	0x00000000
+#define PLDI2CMOD_ATM_AUTO	0x00000003
+#define PLDI2CACK	__reg32(M32700UT_LAN_BASE + 0x40048)
+#define PLDI2CACK_ACK		0x00000001
+#define PLDI2CFREQ	__reg32(M32700UT_LAN_BASE + 0x4004c)
+#define PLDI2CCND	__reg32(M32700UT_LAN_BASE + 0x40050)
+#define PLDI2CCND_START		0x00000001
+#define PLDI2CCND_STOP		0x00000002
+#define PLDI2CSTEN	__reg32(M32700UT_LAN_BASE + 0x40054)
+#define PLDI2CSTEN_STEN		0x00000001
+#define PLDI2CDATA	__reg32(M32700UT_LAN_BASE + 0x40060)
+#define PLDI2CSTS	__reg32(M32700UT_LAN_BASE + 0x40064)
+#define PLDI2CSTS_TRX		0x00000020
+#define PLDI2CSTS_BB		0x00000010
+#define PLDI2CSTS_NOACK		0x00000001	/* 0:ack, 1:noack */
+
+#endif	/* _M32700UT_M32700UT_LAN_H */
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/include/asm-m32r/m32700ut/m32700ut_lcd.h
new file mode 100644
index 000000000000..ede6c77bd5e6
--- /dev/null
+++ b/include/asm-m32r/m32700ut/m32700ut_lcd.h
@@ -0,0 +1,59 @@
+/*
+ * include/asm/m32700ut_lcd.h
+ *
+ * M32700UT-LCD board
+ *
+ * Copyright (c) 2002	Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id$
+ */
+
+#ifndef _M32700UT_M32700UT_LCD_H
+#define _M32700UT_M32700UT_LCD_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define M32700UT_LCD_BASE	(0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define M32700UT_LCD_BASE	(0x10000000 + NONCACHE_OFFSET)
+#endif	/* __ASSEMBLY__ */
+
+/*
+ * ICU
+ */
+#define M32700UT_LCD_IRQ_BAT_INT	(M32700UT_LCD_PLD_IRQ_BASE + 1)
+#define M32700UT_LCD_IRQ_USB_INT1	(M32700UT_LCD_PLD_IRQ_BASE + 2)
+#define M32700UT_LCD_IRQ_AUDT0		(M32700UT_LCD_PLD_IRQ_BASE + 3)
+#define M32700UT_LCD_IRQ_AUDT2		(M32700UT_LCD_PLD_IRQ_BASE + 4)
+#define M32700UT_LCD_IRQ_BATSIO_RCV	(M32700UT_LCD_PLD_IRQ_BASE + 16)
+#define M32700UT_LCD_IRQ_BATSIO_SND	(M32700UT_LCD_PLD_IRQ_BASE + 17)
+#define M32700UT_LCD_IRQ_ASNDSIO_RCV	(M32700UT_LCD_PLD_IRQ_BASE + 18)
+#define M32700UT_LCD_IRQ_ASNDSIO_SND	(M32700UT_LCD_PLD_IRQ_BASE + 19)
+#define M32700UT_LCD_IRQ_ACNLSIO_SND	(M32700UT_LCD_PLD_IRQ_BASE + 21)
+
+#define M32700UT_LCD_ICUISTS	__reg16(M32700UT_LCD_BASE + 0x300002)
+#define M32700UT_LCD_ICUISTS_VECB_MASK	(0xf000)
+#define M32700UT_LCD_VECB(x)	((x) & M32700UT_LCD_ICUISTS_VECB_MASK)
+#define M32700UT_LCD_ICUISTS_ISN_MASK	(0x07c0)
+#define M32700UT_LCD_ICUISTS_ISN(x)	((x) & M32700UT_LCD_ICUISTS_ISN_MASK)
+#define M32700UT_LCD_ICUIREQ0	__reg16(M32700UT_LCD_BASE + 0x300004)
+#define M32700UT_LCD_ICUIREQ1	__reg16(M32700UT_LCD_BASE + 0x300006)
+#define M32700UT_LCD_ICUCR1	__reg16(M32700UT_LCD_BASE + 0x300020)
+#define M32700UT_LCD_ICUCR2	__reg16(M32700UT_LCD_BASE + 0x300022)
+#define M32700UT_LCD_ICUCR3	__reg16(M32700UT_LCD_BASE + 0x300024)
+#define M32700UT_LCD_ICUCR4	__reg16(M32700UT_LCD_BASE + 0x300026)
+#define M32700UT_LCD_ICUCR16	__reg16(M32700UT_LCD_BASE + 0x300030)
+#define M32700UT_LCD_ICUCR17	__reg16(M32700UT_LCD_BASE + 0x300032)
+#define M32700UT_LCD_ICUCR18	__reg16(M32700UT_LCD_BASE + 0x300034)
+#define M32700UT_LCD_ICUCR19	__reg16(M32700UT_LCD_BASE + 0x300036)
+#define M32700UT_LCD_ICUCR21	__reg16(M32700UT_LCD_BASE + 0x30003a)
+
+#endif	/* _M32700UT_M32700UT_LCD_H */
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/include/asm-m32r/m32700ut/m32700ut_pld.h
new file mode 100644
index 000000000000..f5e479486696
--- /dev/null
+++ b/include/asm-m32r/m32700ut/m32700ut_pld.h
@@ -0,0 +1,265 @@
+/*
+ * include/asm/m32700ut/m32700ut_pld.h
+ *
+ * Definitions for Programable Logic Device(PLD) on M32700UT board.
+ *
+ * Copyright (c) 2002	Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id$
+ */
+
+#ifndef _M32700UT_M32700UT_PLD_H
+#define _M32700UT_M32700UT_PLD_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_PLAT_M32700UT_Alpha)
+#define PLD_PLAT_BASE		0x08c00000
+#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV)
+#define PLD_PLAT_BASE		0x04c00000
+#else
+#error "no platform configuration"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define PLD_BASE		(PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
+#define __reg8			(volatile unsigned char *)
+#define __reg16			(volatile unsigned short *)
+#define __reg32			(volatile unsigned int *)
+#else
+#define PLD_BASE		(PLD_PLAT_BASE + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif	/* __ASSEMBLY__ */
+
+/* CFC */
+#define	PLD_CFRSTCR		__reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS		__reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK		__reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR		__reg16(PLD_BASE + 0x0006)
+#define PLD_CFVENCR		__reg16(PLD_BASE + 0x0008)
+#define PLD_CFCR0		__reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1		__reg16(PLD_BASE + 0x000c)
+#define PLD_IDERSTCR		__reg16(PLD_BASE + 0x0010)
+
+/* MMC */
+#define PLD_MMCCR		__reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD		__reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS		__reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR		__reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT		__reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT		__reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET		__reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP		__reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA		__reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA		__reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA		__reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA		__reg16(PLD_BASE + 0x7006)
+
+/* ICU
+ *  ICUISTS:	status register
+ *  ICUIREQ0: 	request register
+ *  ICUIREQ1: 	request register
+ *  ICUCR3:	control register for CFIREQ# interrupt
+ *  ICUCR4:	control register for CFC Card insert interrupt
+ *  ICUCR5:	control register for CFC Card eject interrupt
+ *  ICUCR6:	control register for external interrupt
+ *  ICUCR11:	control register for MMC Card insert/eject interrupt
+ *  ICUCR13:	control register for SC error interrupt
+ *  ICUCR14:	control register for SC receive interrupt
+ *  ICUCR15:	control register for SC send interrupt
+ *  ICUCR16:	control register for SIO0 receive interrupt
+ *  ICUCR17:	control register for SIO0 send interrupt
+ */
+#if !defined(CONFIG_PLAT_USRV)
+#define PLD_IRQ_INT0		(M32700UT_PLD_IRQ_BASE + 0)	/* None */
+#define PLD_IRQ_INT1		(M32700UT_PLD_IRQ_BASE + 1)	/* reserved */
+#define PLD_IRQ_INT2		(M32700UT_PLD_IRQ_BASE + 2)	/* reserved */
+#define PLD_IRQ_CFIREQ		(M32700UT_PLD_IRQ_BASE + 3)	/* CF IREQ */
+#define PLD_IRQ_CFC_INSERT	(M32700UT_PLD_IRQ_BASE + 4)	/* CF Insert */
+#define PLD_IRQ_CFC_EJECT	(M32700UT_PLD_IRQ_BASE + 5)	/* CF Eject */
+#define PLD_IRQ_EXINT		(M32700UT_PLD_IRQ_BASE + 6)	/* EXINT */
+#define PLD_IRQ_INT7		(M32700UT_PLD_IRQ_BASE + 7)	/* reserved */
+#define PLD_IRQ_INT8		(M32700UT_PLD_IRQ_BASE + 8)	/* reserved */
+#define PLD_IRQ_INT9		(M32700UT_PLD_IRQ_BASE + 9)	/* reserved */
+#define PLD_IRQ_INT10		(M32700UT_PLD_IRQ_BASE + 10)	/* reserved */
+#define PLD_IRQ_MMCCARD		(M32700UT_PLD_IRQ_BASE + 11)	/* MMC Insert/Eject */
+#define PLD_IRQ_INT12		(M32700UT_PLD_IRQ_BASE + 12)	/* reserved */
+#define PLD_IRQ_SC_ERROR	(M32700UT_PLD_IRQ_BASE + 13)	/* SC error */
+#define PLD_IRQ_SC_RCV		(M32700UT_PLD_IRQ_BASE + 14)	/* SC receive */
+#define PLD_IRQ_SC_SND		(M32700UT_PLD_IRQ_BASE + 15)	/* SC send */
+#define PLD_IRQ_SIO0_RCV	(M32700UT_PLD_IRQ_BASE + 16)	/* SIO receive */
+#define PLD_IRQ_SIO0_SND	(M32700UT_PLD_IRQ_BASE + 17)	/* SIO send */
+#define PLD_IRQ_INT18		(M32700UT_PLD_IRQ_BASE + 18)	/* reserved */
+#define PLD_IRQ_INT19		(M32700UT_PLD_IRQ_BASE + 19)	/* reserved */
+#define PLD_IRQ_INT20		(M32700UT_PLD_IRQ_BASE + 20)	/* reserved */
+#define PLD_IRQ_INT21		(M32700UT_PLD_IRQ_BASE + 21)	/* reserved */
+#define PLD_IRQ_INT22		(M32700UT_PLD_IRQ_BASE + 22)	/* reserved */
+#define PLD_IRQ_INT23		(M32700UT_PLD_IRQ_BASE + 23)	/* reserved */
+#define PLD_IRQ_INT24		(M32700UT_PLD_IRQ_BASE + 24)	/* reserved */
+#define PLD_IRQ_INT25		(M32700UT_PLD_IRQ_BASE + 25)	/* reserved */
+#define PLD_IRQ_INT26		(M32700UT_PLD_IRQ_BASE + 26)	/* reserved */
+#define PLD_IRQ_INT27		(M32700UT_PLD_IRQ_BASE + 27)	/* reserved */
+#define PLD_IRQ_INT28		(M32700UT_PLD_IRQ_BASE + 28)	/* reserved */
+#define PLD_IRQ_INT29		(M32700UT_PLD_IRQ_BASE + 29)	/* reserved */
+#define PLD_IRQ_INT30		(M32700UT_PLD_IRQ_BASE + 30)	/* reserved */
+#define PLD_IRQ_INT31		(M32700UT_PLD_IRQ_BASE + 31)	/* reserved */
+
+#else	/* CONFIG_PLAT_USRV */
+
+#define PLD_IRQ_INT0		(M32700UT_PLD_IRQ_BASE + 0)	/* None */
+#define PLD_IRQ_INT1		(M32700UT_PLD_IRQ_BASE + 1)	/* reserved */
+#define PLD_IRQ_INT2		(M32700UT_PLD_IRQ_BASE + 2)	/* reserved */
+#define PLD_IRQ_CF0		(M32700UT_PLD_IRQ_BASE + 3)	/* CF0# */
+#define PLD_IRQ_CF1		(M32700UT_PLD_IRQ_BASE + 4)	/* CF1# */
+#define PLD_IRQ_CF2		(M32700UT_PLD_IRQ_BASE + 5)	/* CF2# */
+#define PLD_IRQ_CF3		(M32700UT_PLD_IRQ_BASE + 6)	/* CF3# */
+#define PLD_IRQ_CF4		(M32700UT_PLD_IRQ_BASE + 7)	/* CF4# */
+#define PLD_IRQ_INT8		(M32700UT_PLD_IRQ_BASE + 8)	/* reserved */
+#define PLD_IRQ_INT9		(M32700UT_PLD_IRQ_BASE + 9)	/* reserved */
+#define PLD_IRQ_INT10		(M32700UT_PLD_IRQ_BASE + 10)	/* reserved */
+#define PLD_IRQ_INT11		(M32700UT_PLD_IRQ_BASE + 11)	/* reserved */
+#define PLD_IRQ_UART0		(M32700UT_PLD_IRQ_BASE + 12)	/* UARTIRQ0 */
+#define PLD_IRQ_UART1		(M32700UT_PLD_IRQ_BASE + 13)	/* UARTIRQ1 */
+#define PLD_IRQ_INT14		(M32700UT_PLD_IRQ_BASE + 14)	/* reserved */
+#define PLD_IRQ_INT15		(M32700UT_PLD_IRQ_BASE + 15)	/* reserved */
+#define PLD_IRQ_SNDINT		(M32700UT_PLD_IRQ_BASE + 16)	/* SNDINT# */
+#define PLD_IRQ_INT17		(M32700UT_PLD_IRQ_BASE + 17)	/* reserved */
+#define PLD_IRQ_INT18		(M32700UT_PLD_IRQ_BASE + 18)	/* reserved */
+#define PLD_IRQ_INT19		(M32700UT_PLD_IRQ_BASE + 19)	/* reserved */
+#define PLD_IRQ_INT20		(M32700UT_PLD_IRQ_BASE + 20)	/* reserved */
+#define PLD_IRQ_INT21		(M32700UT_PLD_IRQ_BASE + 21)	/* reserved */
+#define PLD_IRQ_INT22		(M32700UT_PLD_IRQ_BASE + 22)	/* reserved */
+#define PLD_IRQ_INT23		(M32700UT_PLD_IRQ_BASE + 23)	/* reserved */
+#define PLD_IRQ_INT24		(M32700UT_PLD_IRQ_BASE + 24)	/* reserved */
+#define PLD_IRQ_INT25		(M32700UT_PLD_IRQ_BASE + 25)	/* reserved */
+#define PLD_IRQ_INT26		(M32700UT_PLD_IRQ_BASE + 26)	/* reserved */
+#define PLD_IRQ_INT27		(M32700UT_PLD_IRQ_BASE + 27)	/* reserved */
+#define PLD_IRQ_INT28		(M32700UT_PLD_IRQ_BASE + 28)	/* reserved */
+#define PLD_IRQ_INT29		(M32700UT_PLD_IRQ_BASE + 29)	/* reserved */
+#define PLD_IRQ_INT30		(M32700UT_PLD_IRQ_BASE + 30)	/* reserved */
+
+#endif	/* CONFIG_PLAT_USRV */
+
+#define PLD_ICUISTS		__reg16(PLD_BASE + 0x8002)
+#define PLD_ICUISTS_VECB_MASK	(0xf000)
+#define PLD_ICUISTS_VECB(x)	((x) & PLD_ICUISTS_VECB_MASK)
+#define PLD_ICUISTS_ISN_MASK	(0x07c0)
+#define PLD_ICUISTS_ISN(x)	((x) & PLD_ICUISTS_ISN_MASK)
+#define PLD_ICUIREQ0		__reg16(PLD_BASE + 0x8004)
+#define PLD_ICUIREQ1		__reg16(PLD_BASE + 0x8006)
+#define PLD_ICUCR1		__reg16(PLD_BASE + 0x8100)
+#define PLD_ICUCR2		__reg16(PLD_BASE + 0x8102)
+#define PLD_ICUCR3		__reg16(PLD_BASE + 0x8104)
+#define PLD_ICUCR4		__reg16(PLD_BASE + 0x8106)
+#define PLD_ICUCR5		__reg16(PLD_BASE + 0x8108)
+#define PLD_ICUCR6		__reg16(PLD_BASE + 0x810a)
+#define PLD_ICUCR7		__reg16(PLD_BASE + 0x810c)
+#define PLD_ICUCR8		__reg16(PLD_BASE + 0x810e)
+#define PLD_ICUCR9		__reg16(PLD_BASE + 0x8110)
+#define PLD_ICUCR10		__reg16(PLD_BASE + 0x8112)
+#define PLD_ICUCR11		__reg16(PLD_BASE + 0x8114)
+#define PLD_ICUCR12		__reg16(PLD_BASE + 0x8116)
+#define PLD_ICUCR13		__reg16(PLD_BASE + 0x8118)
+#define PLD_ICUCR14		__reg16(PLD_BASE + 0x811a)
+#define PLD_ICUCR15		__reg16(PLD_BASE + 0x811c)
+#define PLD_ICUCR16		__reg16(PLD_BASE + 0x811e)
+#define PLD_ICUCR17		__reg16(PLD_BASE + 0x8120)
+#define PLD_ICUCR_IEN		(0x1000)
+#define PLD_ICUCR_IREQ		(0x0100)
+#define PLD_ICUCR_ISMOD00	(0x0000)	/* Low edge */
+#define PLD_ICUCR_ISMOD01	(0x0010)	/* Low level */
+#define PLD_ICUCR_ISMOD02	(0x0020)	/* High edge */
+#define PLD_ICUCR_ISMOD03	(0x0030)	/* High level */
+#define PLD_ICUCR_ILEVEL0	(0x0000)
+#define PLD_ICUCR_ILEVEL1	(0x0001)
+#define PLD_ICUCR_ILEVEL2	(0x0002)
+#define PLD_ICUCR_ILEVEL3	(0x0003)
+#define PLD_ICUCR_ILEVEL4	(0x0004)
+#define PLD_ICUCR_ILEVEL5	(0x0005)
+#define PLD_ICUCR_ILEVEL6	(0x0006)
+#define PLD_ICUCR_ILEVEL7	(0x0007)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR		__reg16(PLD_BASE + 0x14000)
+#define PLD_CPCR_CF		0x0001
+#define PLD_CPCR_MMC		0x0002
+
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR		__reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON		0x001
+#define PLD_IOLED_1_OFF		0x000
+#define PLD_IOLED_2_ON		0x002
+#define PLD_IOLED_2_OFF		0x000
+
+/* DIP Switch
+ *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ *  1: -
+ *  2: -
+ *  3: -
+ */
+#define PLD_IOSWSTS		__reg16(PLD_BASE + 0x14004)
+#define	PLD_IOSWSTS_IOSW2	0x0200
+#define	PLD_IOSWSTS_IOSW1	0x0100
+#define	PLD_IOSWSTS_IOWP0	0x0001
+
+/* CRC */
+#define PLD_CRC7DATA		__reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA		__reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA		__reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA		__reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)
+
+/* RTC */
+#define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR		__reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA		__reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA		__reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT		__reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR		__reg16(PLD_BASE + 0x20000)
+#define	PLD_ESIO0CR_TXEN	0x0001
+#define	PLD_ESIO0CR_RXEN	0x0002
+#define PLD_ESIO0MOD0		__reg16(PLD_BASE + 0x20002)
+#define	PLD_ESIO0MOD0_CTSS	0x0040
+#define	PLD_ESIO0MOD0_RTSS	0x0080
+#define PLD_ESIO0MOD1		__reg16(PLD_BASE + 0x20004)
+#define	PLD_ESIO0MOD1_LMFS	0x0010
+#define PLD_ESIO0STS		__reg16(PLD_BASE + 0x20006)
+#define	PLD_ESIO0STS_TEMP	0x0001
+#define	PLD_ESIO0STS_TXCP	0x0002
+#define	PLD_ESIO0STS_RXCP	0x0004
+#define	PLD_ESIO0STS_TXSC	0x0100
+#define	PLD_ESIO0STS_RXSC	0x0200
+#define PLD_ESIO0STS_TXREADY	(PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR		__reg16(PLD_BASE + 0x20008)
+#define	PLD_ESIO0INTCR_TXIEN	0x0002
+#define	PLD_ESIO0INTCR_RXCEN	0x0004
+#define PLD_ESIO0BAUR		__reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB		__reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB		__reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR		__reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD		__reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS		__reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR		__reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR		__reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB		__reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB		__reg16(PLD_BASE + 0x3800e)
+
+#endif	/* _M32700UT_M32700UT_PLD.H */
diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h
new file mode 100644
index 000000000000..f116649bbef3
--- /dev/null
+++ b/include/asm-m32r/m32r.h
@@ -0,0 +1,134 @@
+#ifndef _ASM_M32R_M32R_H_
+#define _ASM_M32R_M32R_H_
+
+/*
+ * Renesas M32R processor
+ *
+ * Copyright (C) 2003, 2004  Renesas Technology Corp.
+ */
+
+#include <linux/config.h>
+
+/* Chip type */
+#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP)
+#include <asm/m32r_mp_fpga.h>
+#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \
+	|| defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
+        || defined(CONFIG_CHIP_OPSP)
+#include <asm/m32102.h>
+#include <asm/m32102peri.h>
+#endif
+
+/* Platform type */
+#if defined(CONFIG_PLAT_M32700UT)
+#include <asm/m32700ut/m32700ut_pld.h>
+#include <asm/m32700ut/m32700ut_lan.h>
+#include <asm/m32700ut/m32700ut_lcd.h>
+#endif  /* CONFIG_PLAT_M32700UT */
+
+#if defined(CONFIG_PLAT_OPSPUT)
+#include <asm/opsput/opsput_pld.h>
+#include <asm/opsput/opsput_lan.h>
+#include <asm/opsput/opsput_lcd.h>
+#endif  /* CONFIG_PLAT_OPSPUT */
+
+#if defined(CONFIG_PLAT_MAPPI2)
+#include <asm/mappi2/mappi2_pld.h>
+#endif	/* CONFIG_PLAT_MAPPI2 */
+
+#if defined(CONFIG_PLAT_USRV)
+#include <asm/m32700ut/m32700ut_pld.h>
+#endif
+
+/*
+ * M32R Register
+ */
+
+/*
+ * MMU Register
+ */
+
+#define MMU_REG_BASE	(0xffff0000)
+#define ITLB_BASE	(0xfe000000)
+#define DTLB_BASE	(0xfe000800)
+
+#define NR_TLB_ENTRIES	CONFIG_TLB_ENTRIES
+
+#define MATM	MMU_REG_BASE		/* MMU Address Translation Mode
+					   Register */
+#define MPSZ	(0x04 + MMU_REG_BASE)	/* MMU Page Size Designation Register */
+#define MASID	(0x08 + MMU_REG_BASE)	/* MMU Address Space ID Register */
+#define MESTS	(0x0c + MMU_REG_BASE)	/* MMU Exception Status Register */
+#define MDEVA	(0x10 + MMU_REG_BASE)	/* MMU Operand Exception Virtual
+					   Address Register */
+#define MDEVP	(0x14 + MMU_REG_BASE)	/* MMU Operand Exception Virtual Page
+					   Number Register */
+#define MPTB	(0x18 + MMU_REG_BASE)	/* MMU Page Table Base Register */
+#define MSVA	(0x20 + MMU_REG_BASE)	/* MMU Search Virtual Address
+					   Register */
+#define MTOP	(0x24 + MMU_REG_BASE)	/* MMU TLB Operation Register */
+#define MIDXI	(0x28 + MMU_REG_BASE)	/* MMU Index Register for
+					   Instruciton */
+#define MIDXD	(0x2c + MMU_REG_BASE)	/* MMU Index Register for Operand */
+
+#define MATM_offset	(MATM - MMU_REG_BASE)
+#define MPSZ_offset	(MPSZ - MMU_REG_BASE)
+#define MASID_offset	(MASID - MMU_REG_BASE)
+#define MESTS_offset	(MESTS - MMU_REG_BASE)
+#define MDEVA_offset	(MDEVA - MMU_REG_BASE)
+#define MDEVP_offset	(MDEVP - MMU_REG_BASE)
+#define MPTB_offset	(MPTB - MMU_REG_BASE)
+#define MSVA_offset	(MSVA - MMU_REG_BASE)
+#define MTOP_offset	(MTOP - MMU_REG_BASE)
+#define MIDXI_offset	(MIDXI - MMU_REG_BASE)
+#define MIDXD_offset	(MIDXD - MMU_REG_BASE)
+
+#define MESTS_IT	(1 << 0)	/* Instruction TLB miss */
+#define MESTS_IA	(1 << 1)	/* Instruction Access Exception */
+#define MESTS_DT	(1 << 4)	/* Operand TLB miss */
+#define MESTS_DA	(1 << 5)	/* Operand Access Exception */
+#define MESTS_DRW	(1 << 6)	/* Operand Write Exception Flag */
+
+/*
+ * PSW (Processor Status Word)
+ */
+
+/* PSW bit */
+#define M32R_PSW_BIT_SM   (7)    /* Stack Mode */
+#define M32R_PSW_BIT_IE   (6)    /* Interrupt Enable */
+#define M32R_PSW_BIT_PM   (3)    /* Processor Mode [0:Supervisor,1:User] */
+#define M32R_PSW_BIT_C    (0)    /* Condition */
+#define M32R_PSW_BIT_BSM  (7+8)  /* Backup Stack Mode */
+#define M32R_PSW_BIT_BIE  (6+8)  /* Backup Interrupt Enable */
+#define M32R_PSW_BIT_BPM  (3+8)  /* Backup Processor Mode */
+#define M32R_PSW_BIT_BC   (0+8)  /* Backup Condition */
+
+/* PSW bit map */
+#define M32R_PSW_SM   (1UL<< M32R_PSW_BIT_SM)   /* Stack Mode */
+#define M32R_PSW_IE   (1UL<< M32R_PSW_BIT_IE)   /* Interrupt Enable */
+#define M32R_PSW_PM   (1UL<< M32R_PSW_BIT_PM)   /* Processor Mode */
+#define M32R_PSW_C    (1UL<< M32R_PSW_BIT_C)    /* Condition */
+#define M32R_PSW_BSM  (1UL<< M32R_PSW_BIT_BSM)  /* Backup Stack Mode */
+#define M32R_PSW_BIE  (1UL<< M32R_PSW_BIT_BIE)  /* Backup Interrupt Enable */
+#define M32R_PSW_BPM  (1UL<< M32R_PSW_BIT_BPM)  /* Backup Processor Mode */
+#define M32R_PSW_BC   (1UL<< M32R_PSW_BIT_BC)   /* Backup Condition */
+
+/*
+ * Direct address to SFR
+ */
+
+#include <asm/page.h>
+#ifdef CONFIG_MMU
+#define NONCACHE_OFFSET  __PAGE_OFFSET+0x20000000
+#else
+#define NONCACHE_OFFSET  __PAGE_OFFSET
+#endif /* CONFIG_MMU */
+
+#define M32R_ICU_ISTS_ADDR  M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET
+#define M32R_ICU_IPICR_ADDR  M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET
+#define M32R_ICU_IMASK_ADDR  M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_CPU_NAME_ADDR  M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_MODEL_ID_ADDR  M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_VERSION_ADDR   M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET
+
+#endif /* _ASM_M32R_M32R_H_ */
diff --git a/include/asm-m32r/m32r_mp_fpga.h b/include/asm-m32r/m32r_mp_fpga.h
new file mode 100644
index 000000000000..976d2b995919
--- /dev/null
+++ b/include/asm-m32r/m32r_mp_fpga.h
@@ -0,0 +1,313 @@
+#ifndef _ASM_M32R_M32R_MP_FPGA_
+#define _ASM_M32R_M32R_MP_FPGA_
+
+/*
+ * Renesas M32R-MP-FPGA
+ *
+ * Copyright (c) 2002  Hitoshi Yamamoto
+ * Copyright (c) 2003, 2004  Renesas Technology Corp.
+ */
+
+/*
+ * ========================================================
+ * M32R-MP-FPGA Memory Map
+ * ========================================================
+ * 0x00000000 : Block#0 : 64[MB]
+ *              0x03E00000 : SFR
+ *                           0x03E00000 : reserved
+ *                           0x03EF0000 : FPGA
+ *                           0x03EF1000 : reserved
+ *                           0x03EF4000 : CKM
+ *                           0x03EF4000 : BSELC
+ *                           0x03EF5000 : reserved
+ *                           0x03EFC000 : MFT
+ *                           0x03EFD000 : SIO
+ *                           0x03EFE000 : reserved
+ *                           0x03EFF000 : ICU
+ *              0x03F00000 : Internal SRAM 64[KB]
+ *              0x03F10000 : reserved
+ * --------------------------------------------------------
+ * 0x04000000 : Block#1 : 64[MB]
+ *              0x04000000 : Debug board SRAM 4[MB]
+ *              0x04400000 : reserved
+ * --------------------------------------------------------
+ * 0x08000000 : Block#2 : 64[MB]
+ * --------------------------------------------------------
+ * 0x0C000000 : Block#3 : 64[MB]
+ * --------------------------------------------------------
+ * 0x10000000 : Block#4 : 64[MB]
+ * --------------------------------------------------------
+ * 0x14000000 : Block#5 : 64[MB]
+ * --------------------------------------------------------
+ * 0x18000000 : Block#6 : 64[MB]
+ * --------------------------------------------------------
+ * 0x1C000000 : Block#7 : 64[MB]
+ * --------------------------------------------------------
+ * 0xFE000000 : TLB
+ *              0xFE000000 : ITLB
+ *              0xFE000080 : reserved
+ *              0xFE000800 : DTLB
+ *              0xFE000880 : reserved
+ * --------------------------------------------------------
+ * 0xFF000000 : System area
+ *              0xFFFF0000 : MMU
+ *              0xFFFF0030 : reserved
+ *              0xFFFF8000 : Debug function
+ *              0xFFFFA000 : reserved
+ *              0xFFFFC000 : CPU control
+ * 0xFFFFFFFF
+ * ========================================================
+ */
+
+/*======================================================================*
+ * Special Function Register
+ *======================================================================*/
+#define M32R_SFR_OFFSET  (0x00E00000)  /* 0x03E00000-0x03EFFFFF 1[MB] */
+
+/*
+ * FPGA registers.
+ */
+#define M32R_FPGA_TOP  (0x000F0000+M32R_SFR_OFFSET)
+
+#define M32R_FPGA_NUM_OF_CPUS_PORTL  (0x00+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME0_PORTL    (0x10+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME1_PORTL    (0x14+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME2_PORTL    (0x18+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME3_PORTL    (0x1C+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID0_PORTL    (0x20+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID1_PORTL    (0x24+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID2_PORTL    (0x28+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID3_PORTL    (0x2C+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION0_PORTL     (0x30+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION1_PORTL     (0x34+M32R_FPGA_TOP)
+
+/*
+ * Clock and Power Manager registers.
+ */
+#define M32R_CPM_OFFSET  (0x000F4000+M32R_SFR_OFFSET)
+
+#define M32R_CPM_CPUCLKCR_PORTL  (0x00+M32R_CPM_OFFSET)
+#define M32R_CPM_CLKMOD_PORTL    (0x04+M32R_CPM_OFFSET)
+#define M32R_CPM_PLLCR_PORTL     (0x08+M32R_CPM_OFFSET)
+
+/*
+ * Block SELect Controller registers.
+ */
+#define M32R_BSELC_OFFSET  (0x000F5000+M32R_SFR_OFFSET)
+
+#define M32R_BSEL0_CR0_PORTL  (0x000+M32R_BSELC_OFFSET)
+#define M32R_BSEL0_CR1_PORTL  (0x004+M32R_BSELC_OFFSET)
+#define M32R_BSEL1_CR0_PORTL  (0x100+M32R_BSELC_OFFSET)
+#define M32R_BSEL1_CR1_PORTL  (0x104+M32R_BSELC_OFFSET)
+#define M32R_BSEL2_CR0_PORTL  (0x200+M32R_BSELC_OFFSET)
+#define M32R_BSEL2_CR1_PORTL  (0x204+M32R_BSELC_OFFSET)
+#define M32R_BSEL3_CR0_PORTL  (0x300+M32R_BSELC_OFFSET)
+#define M32R_BSEL3_CR1_PORTL  (0x304+M32R_BSELC_OFFSET)
+#define M32R_BSEL4_CR0_PORTL  (0x400+M32R_BSELC_OFFSET)
+#define M32R_BSEL4_CR1_PORTL  (0x404+M32R_BSELC_OFFSET)
+#define M32R_BSEL5_CR0_PORTL  (0x500+M32R_BSELC_OFFSET)
+#define M32R_BSEL5_CR1_PORTL  (0x504+M32R_BSELC_OFFSET)
+#define M32R_BSEL6_CR0_PORTL  (0x600+M32R_BSELC_OFFSET)
+#define M32R_BSEL6_CR1_PORTL  (0x604+M32R_BSELC_OFFSET)
+#define M32R_BSEL7_CR0_PORTL  (0x700+M32R_BSELC_OFFSET)
+#define M32R_BSEL7_CR1_PORTL  (0x704+M32R_BSELC_OFFSET)
+
+/*
+ * Multi Function Timer registers.
+ */
+#define M32R_MFT_OFFSET        (0x000FC000+M32R_SFR_OFFSET)
+
+#define M32R_MFTCR_PORTL       (0x000+M32R_MFT_OFFSET)  /* MFT control */
+#define M32R_MFTRPR_PORTL      (0x004+M32R_MFT_OFFSET)  /* MFT real port */
+
+#define M32R_MFT0_OFFSET       (0x100+M32R_MFT_OFFSET)
+#define M32R_MFT0MOD_PORTL     (0x00+M32R_MFT0_OFFSET)  /* MFT0 mode */
+#define M32R_MFT0BOS_PORTL     (0x04+M32R_MFT0_OFFSET)  /* MFT0 b-port output status */
+#define M32R_MFT0CUT_PORTL     (0x08+M32R_MFT0_OFFSET)  /* MFT0 count */
+#define M32R_MFT0RLD_PORTL     (0x0C+M32R_MFT0_OFFSET)  /* MFT0 reload */
+#define M32R_MFT0CMPRLD_PORTL  (0x10+M32R_MFT0_OFFSET)  /* MFT0 compare reload */
+
+#define M32R_MFT1_OFFSET       (0x200+M32R_MFT_OFFSET)
+#define M32R_MFT1MOD_PORTL     (0x00+M32R_MFT1_OFFSET)  /* MFT1 mode */
+#define M32R_MFT1BOS_PORTL     (0x04+M32R_MFT1_OFFSET)  /* MFT1 b-port output status */
+#define M32R_MFT1CUT_PORTL     (0x08+M32R_MFT1_OFFSET)  /* MFT1 count */
+#define M32R_MFT1RLD_PORTL     (0x0C+M32R_MFT1_OFFSET)  /* MFT1 reload */
+#define M32R_MFT1CMPRLD_PORTL  (0x10+M32R_MFT1_OFFSET)  /* MFT1 compare reload */
+
+#define M32R_MFT2_OFFSET       (0x300+M32R_MFT_OFFSET)
+#define M32R_MFT2MOD_PORTL     (0x00+M32R_MFT2_OFFSET)  /* MFT2 mode */
+#define M32R_MFT2BOS_PORTL     (0x04+M32R_MFT2_OFFSET)  /* MFT2 b-port output status */
+#define M32R_MFT2CUT_PORTL     (0x08+M32R_MFT2_OFFSET)  /* MFT2 count */
+#define M32R_MFT2RLD_PORTL     (0x0C+M32R_MFT2_OFFSET)  /* MFT2 reload */
+#define M32R_MFT2CMPRLD_PORTL  (0x10+M32R_MFT2_OFFSET)  /* MFT2 compare reload */
+
+#define M32R_MFT3_OFFSET       (0x400+M32R_MFT_OFFSET)
+#define M32R_MFT3MOD_PORTL     (0x00+M32R_MFT3_OFFSET)  /* MFT3 mode */
+#define M32R_MFT3BOS_PORTL     (0x04+M32R_MFT3_OFFSET)  /* MFT3 b-port output status */
+#define M32R_MFT3CUT_PORTL     (0x08+M32R_MFT3_OFFSET)  /* MFT3 count */
+#define M32R_MFT3RLD_PORTL     (0x0C+M32R_MFT3_OFFSET)  /* MFT3 reload */
+#define M32R_MFT3CMPRLD_PORTL  (0x10+M32R_MFT3_OFFSET)  /* MFT3 compare reload */
+
+#define M32R_MFT4_OFFSET       (0x500+M32R_MFT_OFFSET)
+#define M32R_MFT4MOD_PORTL     (0x00+M32R_MFT4_OFFSET)  /* MFT4 mode */
+#define M32R_MFT4BOS_PORTL     (0x04+M32R_MFT4_OFFSET)  /* MFT4 b-port output status */
+#define M32R_MFT4CUT_PORTL     (0x08+M32R_MFT4_OFFSET)  /* MFT4 count */
+#define M32R_MFT4RLD_PORTL     (0x0C+M32R_MFT4_OFFSET)  /* MFT4 reload */
+#define M32R_MFT4CMPRLD_PORTL  (0x10+M32R_MFT4_OFFSET)  /* MFT4 compare reload */
+
+#define M32R_MFT5_OFFSET       (0x600+M32R_MFT_OFFSET)
+#define M32R_MFT5MOD_PORTL     (0x00+M32R_MFT5_OFFSET)  /* MFT4 mode */
+#define M32R_MFT5BOS_PORTL     (0x04+M32R_MFT5_OFFSET)  /* MFT4 b-port output status */
+#define M32R_MFT5CUT_PORTL     (0x08+M32R_MFT5_OFFSET)  /* MFT4 count */
+#define M32R_MFT5RLD_PORTL     (0x0C+M32R_MFT5_OFFSET)  /* MFT4 reload */
+#define M32R_MFT5CMPRLD_PORTL  (0x10+M32R_MFT5_OFFSET)  /* MFT4 compare reload */
+
+#define M32R_MFTCR_MFT0MSK  (1UL<<15)  /* b16 */
+#define M32R_MFTCR_MFT1MSK  (1UL<<14)  /* b17 */
+#define M32R_MFTCR_MFT2MSK  (1UL<<13)  /* b18 */
+#define M32R_MFTCR_MFT3MSK  (1UL<<12)  /* b19 */
+#define M32R_MFTCR_MFT4MSK  (1UL<<11)  /* b20 */
+#define M32R_MFTCR_MFT5MSK  (1UL<<10)  /* b21 */
+#define M32R_MFTCR_MFT0EN   (1UL<<7)   /* b24 */
+#define M32R_MFTCR_MFT1EN   (1UL<<6)   /* b25 */
+#define M32R_MFTCR_MFT2EN   (1UL<<5)   /* b26 */
+#define M32R_MFTCR_MFT3EN   (1UL<<4)   /* b27 */
+#define M32R_MFTCR_MFT4EN   (1UL<<3)   /* b28 */
+#define M32R_MFTCR_MFT5EN   (1UL<<2)   /* b29 */
+
+#define M32R_MFTMOD_CC_MASK    (1UL<<15)  /* b16 */
+#define M32R_MFTMOD_TCCR       (1UL<<13)  /* b18 */
+#define M32R_MFTMOD_GTSEL000   (0UL<<8)   /* b21-23 : 000 */
+#define M32R_MFTMOD_GTSEL001   (1UL<<8)   /* b21-23 : 001 */
+#define M32R_MFTMOD_GTSEL010   (2UL<<8)   /* b21-23 : 010 */
+#define M32R_MFTMOD_GTSEL011   (3UL<<8)   /* b21-23 : 011 */
+#define M32R_MFTMOD_GTSEL110   (6UL<<8)   /* b21-23 : 110 */
+#define M32R_MFTMOD_GTSEL111   (7UL<<8)   /* b21-23 : 111 */
+#define M32R_MFTMOD_CMSEL      (1UL<<3)   /* b28 */
+#define M32R_MFTMOD_CSSEL000   (0UL<<0)   /* b29-b31 : 000 */
+#define M32R_MFTMOD_CSSEL001   (1UL<<0)   /* b29-b31 : 001 */
+#define M32R_MFTMOD_CSSEL010   (2UL<<0)   /* b29-b31 : 010 */
+#define M32R_MFTMOD_CSSEL011   (3UL<<0)   /* b29-b31 : 011 */
+#define M32R_MFTMOD_CSSEL100   (4UL<<0)   /* b29-b31 : 100 */
+#define M32R_MFTMOD_CSSEL110   (6UL<<0)   /* b29-b31 : 110 */
+
+/*
+ * Serial I/O registers.
+ */
+#define M32R_SIO_OFFSET  (0x000FD000+M32R_SFR_OFFSET)
+
+#define M32R_SIO0_CR_PORTL     (0x000+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD0_PORTL   (0x004+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD1_PORTL   (0x008+M32R_SIO_OFFSET)
+#define M32R_SIO0_STS_PORTL    (0x00C+M32R_SIO_OFFSET)
+#define M32R_SIO0_TRCR_PORTL   (0x010+M32R_SIO_OFFSET)
+#define M32R_SIO0_BAUR_PORTL   (0x014+M32R_SIO_OFFSET)
+#define M32R_SIO0_RBAUR_PORTL  (0x018+M32R_SIO_OFFSET)
+#define M32R_SIO0_TXB_PORTL    (0x01C+M32R_SIO_OFFSET)
+#define M32R_SIO0_RXB_PORTL    (0x020+M32R_SIO_OFFSET)
+
+/*
+ * Interrupt Control Unit registers.
+ */
+#define M32R_ICU_OFFSET  (0x000FF000+M32R_SFR_OFFSET)
+
+#define M32R_ICU_ISTS_PORTL     (0x004+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ0_PORTL    (0x008+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ1_PORTL    (0x00C+M32R_ICU_OFFSET)
+#define M32R_ICU_SBICR_PORTL    (0x018+M32R_ICU_OFFSET)
+#define M32R_ICU_IMASK_PORTL    (0x01C+M32R_ICU_OFFSET)
+#define M32R_ICU_CR1_PORTL      (0x200+M32R_ICU_OFFSET)  /* INT0 */
+#define M32R_ICU_CR2_PORTL      (0x204+M32R_ICU_OFFSET)  /* INT1 */
+#define M32R_ICU_CR3_PORTL      (0x208+M32R_ICU_OFFSET)  /* INT2 */
+#define M32R_ICU_CR4_PORTL      (0x20C+M32R_ICU_OFFSET)  /* INT3 */
+#define M32R_ICU_CR5_PORTL      (0x210+M32R_ICU_OFFSET)  /* INT4 */
+#define M32R_ICU_CR6_PORTL      (0x214+M32R_ICU_OFFSET)  /* INT5 */
+#define M32R_ICU_CR7_PORTL      (0x218+M32R_ICU_OFFSET)  /* INT6 */
+#define M32R_ICU_CR8_PORTL      (0x218+M32R_ICU_OFFSET)  /* INT7 */
+#define M32R_ICU_CR32_PORTL     (0x27C+M32R_ICU_OFFSET)  /* SIO0 RX */
+#define M32R_ICU_CR33_PORTL     (0x280+M32R_ICU_OFFSET)  /* SIO0 TX */
+#define M32R_ICU_CR40_PORTL     (0x29C+M32R_ICU_OFFSET)  /* DMAC0 */
+#define M32R_ICU_CR41_PORTL     (0x2A0+M32R_ICU_OFFSET)  /* DMAC1 */
+#define M32R_ICU_CR48_PORTL     (0x2BC+M32R_ICU_OFFSET)  /* MFT0 */
+#define M32R_ICU_CR49_PORTL     (0x2C0+M32R_ICU_OFFSET)  /* MFT1 */
+#define M32R_ICU_CR50_PORTL     (0x2C4+M32R_ICU_OFFSET)  /* MFT2 */
+#define M32R_ICU_CR51_PORTL     (0x2C8+M32R_ICU_OFFSET)  /* MFT3 */
+#define M32R_ICU_CR52_PORTL     (0x2CC+M32R_ICU_OFFSET)  /* MFT4 */
+#define M32R_ICU_CR53_PORTL     (0x2D0+M32R_ICU_OFFSET)  /* MFT5 */
+#define M32R_ICU_IPICR0_PORTL   (0x2DC+M32R_ICU_OFFSET)  /* IPI0 */
+#define M32R_ICU_IPICR1_PORTL   (0x2E0+M32R_ICU_OFFSET)  /* IPI1 */
+#define M32R_ICU_IPICR2_PORTL   (0x2E4+M32R_ICU_OFFSET)  /* IPI2 */
+#define M32R_ICU_IPICR3_PORTL   (0x2E8+M32R_ICU_OFFSET)  /* IPI3 */
+#define M32R_ICU_IPICR4_PORTL   (0x2EC+M32R_ICU_OFFSET)  /* IPI4 */
+#define M32R_ICU_IPICR5_PORTL   (0x2F0+M32R_ICU_OFFSET)  /* IPI5 */
+#define M32R_ICU_IPICR6_PORTL   (0x2F4+M32R_ICU_OFFSET)  /* IPI6 */
+#define M32R_ICU_IPICR7_PORTL   (0x2FC+M32R_ICU_OFFSET)  /* IPI7 */
+
+#define M32R_ICUISTS_VECB(val)  ((val>>28) & 0xF)
+#define M32R_ICUISTS_ISN(val)   ((val>>22) & 0x3F)
+#define M32R_ICUISTS_PIML(val)  ((val>>16) & 0x7)
+
+#define M32R_ICUIMASK_IMSK0  (0UL<<16)  /* b13-b15: Disable interrupt */
+#define M32R_ICUIMASK_IMSK1  (1UL<<16)  /* b13-b15: Enable level 0 interrupt */
+#define M32R_ICUIMASK_IMSK2  (2UL<<16)  /* b13-b15: Enable level 0,1 interrupt */
+#define M32R_ICUIMASK_IMSK3  (3UL<<16)  /* b13-b15: Enable level 0-2 interrupt */
+#define M32R_ICUIMASK_IMSK4  (4UL<<16)  /* b13-b15: Enable level 0-3 interrupt */
+#define M32R_ICUIMASK_IMSK5  (5UL<<16)  /* b13-b15: Enable level 0-4 interrupt */
+#define M32R_ICUIMASK_IMSK6  (6UL<<16)  /* b13-b15: Enable level 0-5 interrupt */
+#define M32R_ICUIMASK_IMSK7  (7UL<<16)  /* b13-b15: Enable level 0-6 interrupt */
+
+#define M32R_ICUCR_IEN      (1UL<<12)  /* b19: Interrupt enable */
+#define M32R_ICUCR_IRQ      (1UL<<8)   /* b23: Interrupt request */
+#define M32R_ICUCR_ISMOD00  (0UL<<4)   /* b26-b27: Interrupt sense mode Edge HtoL */
+#define M32R_ICUCR_ISMOD01  (1UL<<4)   /* b26-b27: Interrupt sense mode Level L */
+#define M32R_ICUCR_ISMOD10  (2UL<<4)   /* b26-b27: Interrupt sense mode Edge LtoH*/
+#define M32R_ICUCR_ISMOD11  (3UL<<4)   /* b26-b27: Interrupt sense mode Level H */
+#define M32R_ICUCR_ILEVEL0  (0UL<<0)   /* b29-b31: Interrupt priority level 0 */
+#define M32R_ICUCR_ILEVEL1  (1UL<<0)   /* b29-b31: Interrupt priority level 1 */
+#define M32R_ICUCR_ILEVEL2  (2UL<<0)   /* b29-b31: Interrupt priority level 2 */
+#define M32R_ICUCR_ILEVEL3  (3UL<<0)   /* b29-b31: Interrupt priority level 3 */
+#define M32R_ICUCR_ILEVEL4  (4UL<<0)   /* b29-b31: Interrupt priority level 4 */
+#define M32R_ICUCR_ILEVEL5  (5UL<<0)   /* b29-b31: Interrupt priority level 5 */
+#define M32R_ICUCR_ILEVEL6  (6UL<<0)   /* b29-b31: Interrupt priority level 6 */
+#define M32R_ICUCR_ILEVEL7  (7UL<<0)   /* b29-b31: Disable interrupt */
+#define M32R_ICUCR_ILEVEL_MASK  (7UL)
+
+#define M32R_IRQ_INT0    (1)   /* INT0 */
+#define M32R_IRQ_INT1    (2)   /* INT1 */
+#define M32R_IRQ_INT2    (3)   /* INT2 */
+#define M32R_IRQ_INT3    (4)   /* INT3 */
+#define M32R_IRQ_INT4    (5)   /* INT4 */
+#define M32R_IRQ_INT5    (6)   /* INT5 */
+#define M32R_IRQ_INT6    (7)   /* INT6 */
+#define M32R_IRQ_INT7    (8)   /* INT7 */
+#define M32R_IRQ_MFT0    (16)  /* MFT0 */
+#define M32R_IRQ_MFT1    (17)  /* MFT1 */
+#define M32R_IRQ_MFT2    (18)  /* MFT2 */
+#define M32R_IRQ_MFT3    (19)  /* MFT3 */
+#define M32R_IRQ_MFT4    (20)  /* MFT4 */
+#define M32R_IRQ_MFT5    (21)  /* MFT5 */
+#define M32R_IRQ_DMAC0   (32)  /* DMAC0 */
+#define M32R_IRQ_DMAC1   (33)  /* DMAC1 */
+#define M32R_IRQ_SIO0_R  (48)  /* SIO0 receive */
+#define M32R_IRQ_SIO0_S  (49)  /* SIO0 send    */
+#define M32R_IRQ_SIO1_R  (50)  /* SIO1 send    */
+#define M32R_IRQ_SIO1_S  (51)  /* SIO1 receive */
+#define M32R_IRQ_IPI0    (56)  /* IPI0 */
+#define M32R_IRQ_IPI1    (57)  /* IPI1 */
+#define M32R_IRQ_IPI2    (58)  /* IPI2 */
+#define M32R_IRQ_IPI3    (59)  /* IPI3 */
+#define M32R_IRQ_IPI4    (60)  /* IPI4 */
+#define M32R_IRQ_IPI5    (61)  /* IPI5 */
+#define M32R_IRQ_IPI6    (62)  /* IPI6 */
+#define M32R_IRQ_IPI7    (63)  /* IPI7 */
+
+/*======================================================================*
+ * CPU
+ *======================================================================*/
+
+#define M32R_CPUID_PORTL   (0xFFFFFFE0)
+#define M32R_MCICAR_PORTL  (0xFFFFFFF0)
+#define M32R_MCDCAR_PORTL  (0xFFFFFFF4)
+#define M32R_MCCR_PORTL    (0xFFFFFFFC)
+
+#endif  /* _ASM_M32R_M32R_MP_FPGA_ */
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/include/asm-m32r/mappi2/mappi2_pld.h
new file mode 100644
index 000000000000..01dcdd19dbe6
--- /dev/null
+++ b/include/asm-m32r/mappi2/mappi2_pld.h
@@ -0,0 +1,151 @@
+/*
+ * include/asm/mappi2/mappi2_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI2 board.
+ *  based on m32700ut_pld.h by
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ */
+
+#ifndef _MAPPI2_PLD_H
+#define _MAPPI2_PLD_H
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE		(0x10c00000 /* + NONCACHE_OFFSET */)
+#define __reg8			(volatile unsigned char *)
+#define __reg16			(volatile unsigned short *)
+#define __reg32			(volatile unsigned int *)
+#else
+#define PLD_BASE		(0x10c00000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif	/* __ASSEMBLY__ */
+
+/* CFC */
+#define	PLD_CFRSTCR		__reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS		__reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK		__reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR		__reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0		__reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1		__reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR		__reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD		__reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS		__reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR		__reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT		__reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT		__reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET		__reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP		__reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA		__reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA		__reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA		__reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA		__reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR		__reg16(PLD_BASE + 0x14000)
+
+
+/*==== ICU ====*/
+#define  M32R_IRQ_PC104        (5)   /* INT4(PC/104) */
+#define  M32R_IRQ_I2C          (28)  /* I2C-BUS     */
+#if 1
+#define  PLD_IRQ_CFIREQ       (40)  /* CFC Card Interrupt */
+#define  PLD_IRQ_CFC_INSERT   (41)  /* CFC Card Insert */
+#define  PLD_IRQ_CFC_EJECT    (42)  /* CFC Card Eject */
+#define  PLD_IRQ_MMCCARD      (43)  /* MMC Card Insert */
+#define  PLD_IRQ_MMCIRQ       (44)  /* MMC Transfer Done */
+#else
+#define  PLD_IRQ_CFIREQ       (34)  /* CFC Card Interrupt */
+#define  PLD_IRQ_CFC_INSERT   (35)  /* CFC Card Insert */
+#define  PLD_IRQ_CFC_EJECT    (36)  /* CFC Card Eject */
+#define  PLD_IRQ_MMCCARD      (37)  /* MMC Card Insert */
+#define  PLD_IRQ_MMCIRQ       (38)  /* MMC Transfer Done */
+#endif
+
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR		__reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON		0x001
+#define PLD_IOLED_1_OFF		0x000
+#define PLD_IOLED_2_ON		0x002
+#define PLD_IOLED_2_OFF		0x000
+
+/* DIP Switch
+ *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ *  1: -
+ *  2: -
+ *  3: -
+ */
+#define PLD_IOSWSTS		__reg16(PLD_BASE + 0x14004)
+#define	PLD_IOSWSTS_IOSW2	0x0200
+#define	PLD_IOSWSTS_IOSW1	0x0100
+#define	PLD_IOSWSTS_IOWP0	0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA		__reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA		__reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA		__reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA		__reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)
+
+
+#if 0
+/* RTC */
+#define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR		__reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA		__reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA		__reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT		__reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR		__reg16(PLD_BASE + 0x20000)
+#define	PLD_ESIO0CR_TXEN	0x0001
+#define	PLD_ESIO0CR_RXEN	0x0002
+#define PLD_ESIO0MOD0		__reg16(PLD_BASE + 0x20002)
+#define	PLD_ESIO0MOD0_CTSS	0x0040
+#define	PLD_ESIO0MOD0_RTSS	0x0080
+#define PLD_ESIO0MOD1		__reg16(PLD_BASE + 0x20004)
+#define	PLD_ESIO0MOD1_LMFS	0x0010
+#define PLD_ESIO0STS		__reg16(PLD_BASE + 0x20006)
+#define	PLD_ESIO0STS_TEMP	0x0001
+#define	PLD_ESIO0STS_TXCP	0x0002
+#define	PLD_ESIO0STS_RXCP	0x0004
+#define	PLD_ESIO0STS_TXSC	0x0100
+#define	PLD_ESIO0STS_RXSC	0x0200
+#define PLD_ESIO0STS_TXREADY	(PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR		__reg16(PLD_BASE + 0x20008)
+#define	PLD_ESIO0INTCR_TXIEN	0x0002
+#define	PLD_ESIO0INTCR_RXCEN	0x0004
+#define PLD_ESIO0BAUR		__reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB		__reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB		__reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR		__reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD		__reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS		__reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR		__reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR		__reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB		__reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB		__reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+#endif	/* _MAPPI2_PLD.H */
diff --git a/include/asm-m32r/mc146818rtc.h b/include/asm-m32r/mc146818rtc.h
new file mode 100644
index 000000000000..755601d053cc
--- /dev/null
+++ b/include/asm-m32r/mc146818rtc.h
@@ -0,0 +1,32 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+// #define RTC_PORT(x)	(0x70 + (x))
+#define RTC_PORT(x)	((x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+#if 0
+#endif
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-m32r/mman.h b/include/asm-m32r/mman.h
new file mode 100644
index 000000000000..011f6d9ec5cc
--- /dev/null
+++ b/include/asm-m32r/mman.h
@@ -0,0 +1,45 @@
+#ifndef __M32R_MMAN_H__
+#define __M32R_MMAN_H__
+
+/* orig : i386 2.6.0-test6 */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __M32R_MMAN_H__ */
diff --git a/include/asm-m32r/mmu.h b/include/asm-m32r/mmu.h
new file mode 100644
index 000000000000..9c00eb78ee50
--- /dev/null
+++ b/include/asm-m32r/mmu.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_M32R_MMU_H
+#define _ASM_M32R_MMU_H
+
+#include <linux/config.h>
+
+#if !defined(CONFIG_MMU)
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+#else
+
+/* Default "unsigned long" context */
+#ifndef CONFIG_SMP
+typedef unsigned long mm_context_t;
+#else
+typedef unsigned long mm_context_t[NR_CPUS];
+#endif
+
+#endif  /* CONFIG_MMU */
+#endif  /* _ASM_M32R_MMU_H */
diff --git a/include/asm-m32r/mmu_context.h b/include/asm-m32r/mmu_context.h
new file mode 100644
index 000000000000..3634c5361a9b
--- /dev/null
+++ b/include/asm-m32r/mmu_context.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_M32R_MMU_CONTEXT_H
+#define _ASM_M32R_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#include <asm/m32r.h>
+
+#define MMU_CONTEXT_ASID_MASK      (0x000000FF)
+#define MMU_CONTEXT_VERSION_MASK   (0xFFFFFF00)
+#define MMU_CONTEXT_FIRST_VERSION  (0x00000100)
+#define NO_CONTEXT                 (0x00000000)
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Cache of MMU context last used.
+ */
+#ifndef CONFIG_SMP
+extern unsigned long mmu_context_cache_dat;
+#define mmu_context_cache	mmu_context_cache_dat
+#define mm_context(mm)		mm->context
+#else /* not CONFIG_SMP */
+extern unsigned long mmu_context_cache_dat[];
+#define mmu_context_cache	mmu_context_cache_dat[smp_processor_id()]
+#define mm_context(mm)		mm->context[smp_processor_id()]
+#endif /* not CONFIG_SMP */
+
+#define set_tlb_tag(entry, tag)		(*entry = (tag & PAGE_MASK)|get_asid())
+#define set_tlb_data(entry, data)	(*entry = (data | _PAGE_PRESENT))
+
+#ifdef CONFIG_MMU
+#define enter_lazy_tlb(mm, tsk)	do { } while (0)
+
+static inline void get_new_mmu_context(struct mm_struct *mm)
+{
+	unsigned long mc = ++mmu_context_cache;
+
+	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+		/* We exhaust ASID of this version.
+		   Flush all TLB and start new cycle. */
+		local_flush_tlb_all();
+		/* Fix version if needed.
+		   Note that we avoid version #0 to distingush NO_CONTEXT. */
+		if (!mc)
+			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm_context(mm) = mc;
+}
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	if (mm) {
+		unsigned long mc = mmu_context_cache;
+
+		/* Check if we have old version of context.
+		   If it's old, we need to get new context with new version. */
+		if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK)
+			get_new_mmu_context(mm);
+	}
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+	struct mm_struct *mm)
+{
+#ifndef CONFIG_SMP
+	mm->context = NO_CONTEXT;
+#else /* CONFIG_SMP */
+	int num_cpus = num_online_cpus();
+	int i;
+
+	for (i = 0 ; i < num_cpus ; i++)
+		mm->context[i] = NO_CONTEXT;
+#endif /* CONFIG_SMP */
+
+	return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+#define destroy_context(mm)	do { } while (0)
+
+static inline void set_asid(unsigned long asid)
+{
+	*(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	asid = *(volatile long *)MASID;
+	asid &= MMU_CONTEXT_ASID_MASK;
+
+	return asid;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+	struct mm_struct *next, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+#endif	/* CONFIG_SMP */
+
+	if (prev != next) {
+#ifdef CONFIG_SMP
+		cpu_set(cpu, next->cpu_vm_mask);
+#endif /* CONFIG_SMP */
+		/* Set MPTB = next->pgd */
+		*(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
+		activate_context(next);
+	}
+#ifdef CONFIG_SMP
+	else
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+			activate_context(next);
+#endif /* CONFIG_SMP */
+}
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+
+#define activate_mm(prev, next)	\
+	switch_mm((prev), (next), NULL)
+
+#else
+#define get_mmu_context(mm)             do { } while (0)
+#define init_new_context(tsk,mm)        (0)
+#define destroy_context(mm)             do { } while (0)
+#define set_asid(asid)                  do { } while (0)
+#define get_asid()                      (0)
+#define activate_context(mm)            do { } while (0)
+#define switch_mm(prev,next,tsk)        do { } while (0)
+#define deactivate_mm(mm,tsk)           do { } while (0)
+#define activate_mm(prev,next)          do { } while (0)
+#define enter_lazy_tlb(mm,tsk)          do { } while (0)
+#endif /* CONFIG_MMU */
+
+
+#endif /* not __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_MMU_CONTEXT_H */
diff --git a/include/asm-m32r/mmzone.h b/include/asm-m32r/mmzone.h
new file mode 100644
index 000000000000..ebf0228fec42
--- /dev/null
+++ b/include/asm-m32r/mmzone.h
@@ -0,0 +1,80 @@
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/smp.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1;	\
+})
+
+#define local_mapnr(kvaddr)						\
+({									\
+	unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT;		\
+	(__pfn - node_start_pfn(pfn_to_nid(__pfn)));			\
+})
+
+#define pfn_to_page(pfn)						\
+({									\
+	unsigned long __pfn = pfn;					\
+	int __node  = pfn_to_nid(__pfn);				\
+	&node_mem_map(__node)[node_localnr(__pfn,__node)];		\
+})
+
+#define page_to_pfn(pg)							\
+({									\
+	struct page *__page = pg;					\
+	struct zone *__zone = page_zone(__page);			\
+	(unsigned long)(__page - __zone->zone_mem_map)			\
+		+ __zone->zone_start_pfn;				\
+})
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+/*
+ * pfn_valid should be made as fast as possible, and the current definition
+ * is valid for machines that are NUMA, but still contiguous, which is what
+ * is currently supported. A more generalised, but slower definition would
+ * be something like this - mbligh:
+ * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) )
+ */
+#if 1	/* M32R_FIXME */
+#define pfn_valid(pfn)	(1)
+#else
+#define pfn_valid(pfn)	((pfn) < num_physpages)
+#endif
+
+/*
+ * generic node memory support, the following assumptions apply:
+ */
+
+static __inline__ int pfn_to_nid(unsigned long pfn)
+{
+	int node;
+
+	for (node = 0 ; node < MAX_NUMNODES ; node++)
+		if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
+			break;
+
+	return node;
+}
+
+static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn)
+{
+	return(NODE_DATA(pfn_to_nid(pfn)));
+}
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-m32r/module.h b/include/asm-m32r/module.h
new file mode 100644
index 000000000000..3f2541c92a7b
--- /dev/null
+++ b/include/asm-m32r/module.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_M32R_MODULE_H
+#define _ASM_M32R_MODULE_H
+
+/* $Id$ */
+
+struct mod_arch_specific { };
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+#endif /* _ASM_M32R_MODULE_H */
+
diff --git a/include/asm-m32r/msgbuf.h b/include/asm-m32r/msgbuf.h
new file mode 100644
index 000000000000..852ff52af4c2
--- /dev/null
+++ b/include/asm-m32r/msgbuf.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_M32R_MSGBUF_H
+#define _ASM_M32R_MSGBUF_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * The msqid64_ds structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_M32R_MSGBUF_H */
diff --git a/include/asm-m32r/namei.h b/include/asm-m32r/namei.h
new file mode 100644
index 000000000000..7172d3d2e260
--- /dev/null
+++ b/include/asm-m32r/namei.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_M32R_NAMEI_H
+#define _ASM_M32R_NAMEI_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * linux/include/asm-m32r/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_M32R_NAMEI_H */
diff --git a/include/asm-m32r/numnodes.h b/include/asm-m32r/numnodes.h
new file mode 100644
index 000000000000..479a39d49f83
--- /dev/null
+++ b/include/asm-m32r/numnodes.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_NUMNODES_H_
+#define _ASM_NUMNODES_H_
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#if defined(CONFIG_CHIP_M32700)
+#define	NODES_SHIFT	1	/* Max 2 Nodes */
+#endif	/* CONFIG_CHIP_M32700 */
+
+#endif	/* CONFIG_DISCONTIGMEM */
+
+#endif	/* _ASM_NUMNODES_H_ */
+
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/include/asm-m32r/opsput/opsput_lan.h
new file mode 100644
index 000000000000..7a2a839eedab
--- /dev/null
+++ b/include/asm-m32r/opsput/opsput_lan.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm/opsput_lan.h
+ *
+ * OPSPUT-LAN board
+ *
+ * Copyright (c) 2002-2004	Takeo Takahashi, Mamoru Sakugawa
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id: opsput_lan.h,v 1.1 2004/07/27 06:54:20 sakugawa Exp $
+ */
+
+#ifndef _OPSPUT_OPSPUT_LAN_H
+#define _OPSPUT_OPSPUT_LAN_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define OPSPUT_LAN_BASE	(0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define OPSPUT_LAN_BASE	(0x10000000 + NONCACHE_OFFSET)
+#endif	/* __ASSEMBLY__ */
+
+/* ICU
+ *  ICUISTS:	status register
+ *  ICUIREQ0: 	request register
+ *  ICUIREQ1: 	request register
+ *  ICUCR3:	control register for CFIREQ# interrupt
+ *  ICUCR4:	control register for CFC Card insert interrupt
+ *  ICUCR5:	control register for CFC Card eject interrupt
+ *  ICUCR6:	control register for external interrupt
+ *  ICUCR11:	control register for MMC Card insert/eject interrupt
+ *  ICUCR13:	control register for SC error interrupt
+ *  ICUCR14:	control register for SC receive interrupt
+ *  ICUCR15:	control register for SC send interrupt
+ *  ICUCR16:	control register for SIO0 receive interrupt
+ *  ICUCR17:	control register for SIO0 send interrupt
+ */
+#define OPSPUT_LAN_IRQ_LAN	(OPSPUT_LAN_PLD_IRQ_BASE + 1)	/* LAN */
+#define OPSPUT_LAN_IRQ_I2C	(OPSPUT_LAN_PLD_IRQ_BASE + 3)	/* I2C */
+
+#define OPSPUT_LAN_ICUISTS	__reg16(OPSPUT_LAN_BASE + 0xc0002)
+#define OPSPUT_LAN_ICUISTS_VECB_MASK	(0xf000)
+#define OPSPUT_LAN_VECB(x)	((x) & OPSPUT_LAN_ICUISTS_VECB_MASK)
+#define OPSPUT_LAN_ICUISTS_ISN_MASK	(0x07c0)
+#define OPSPUT_LAN_ICUISTS_ISN(x)	((x) & OPSPUT_LAN_ICUISTS_ISN_MASK)
+#define OPSPUT_LAN_ICUIREQ0	__reg16(OPSPUT_LAN_BASE + 0xc0004)
+#define OPSPUT_LAN_ICUCR1	__reg16(OPSPUT_LAN_BASE + 0xc0010)
+#define OPSPUT_LAN_ICUCR3	__reg16(OPSPUT_LAN_BASE + 0xc0014)
+
+#endif	/* _OPSPUT_OPSPUT_LAN_H */
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/include/asm-m32r/opsput/opsput_lcd.h
new file mode 100644
index 000000000000..3a883e3d7187
--- /dev/null
+++ b/include/asm-m32r/opsput/opsput_lcd.h
@@ -0,0 +1,59 @@
+/*
+ * include/asm/opsput_lcd.h
+ *
+ * OPSPUT-LCD board
+ *
+ * Copyright (c) 2002	Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id: opsput_lcd.h,v 1.1 2004/07/27 06:54:20 sakugawa Exp $
+ */
+
+#ifndef _OPSPUT_OPSPUT_LCD_H
+#define _OPSPUT_OPSPUT_LCD_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define OPSPUT_LCD_BASE	(0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define OPSPUT_LCD_BASE	(0x10000000 + NONCACHE_OFFSET)
+#endif	/* __ASSEMBLY__ */
+
+/*
+ * ICU
+ */
+#define OPSPUT_LCD_IRQ_BAT_INT	(OPSPUT_LCD_PLD_IRQ_BASE + 1)
+#define OPSPUT_LCD_IRQ_USB_INT1	(OPSPUT_LCD_PLD_IRQ_BASE + 2)
+#define OPSPUT_LCD_IRQ_AUDT0		(OPSPUT_LCD_PLD_IRQ_BASE + 3)
+#define OPSPUT_LCD_IRQ_AUDT2		(OPSPUT_LCD_PLD_IRQ_BASE + 4)
+#define OPSPUT_LCD_IRQ_BATSIO_RCV	(OPSPUT_LCD_PLD_IRQ_BASE + 16)
+#define OPSPUT_LCD_IRQ_BATSIO_SND	(OPSPUT_LCD_PLD_IRQ_BASE + 17)
+#define OPSPUT_LCD_IRQ_ASNDSIO_RCV	(OPSPUT_LCD_PLD_IRQ_BASE + 18)
+#define OPSPUT_LCD_IRQ_ASNDSIO_SND	(OPSPUT_LCD_PLD_IRQ_BASE + 19)
+#define OPSPUT_LCD_IRQ_ACNLSIO_SND	(OPSPUT_LCD_PLD_IRQ_BASE + 21)
+
+#define OPSPUT_LCD_ICUISTS	__reg16(OPSPUT_LCD_BASE + 0x300002)
+#define OPSPUT_LCD_ICUISTS_VECB_MASK	(0xf000)
+#define OPSPUT_LCD_VECB(x)	((x) & OPSPUT_LCD_ICUISTS_VECB_MASK)
+#define OPSPUT_LCD_ICUISTS_ISN_MASK	(0x07c0)
+#define OPSPUT_LCD_ICUISTS_ISN(x)	((x) & OPSPUT_LCD_ICUISTS_ISN_MASK)
+#define OPSPUT_LCD_ICUIREQ0	__reg16(OPSPUT_LCD_BASE + 0x300004)
+#define OPSPUT_LCD_ICUIREQ1	__reg16(OPSPUT_LCD_BASE + 0x300006)
+#define OPSPUT_LCD_ICUCR1	__reg16(OPSPUT_LCD_BASE + 0x300020)
+#define OPSPUT_LCD_ICUCR2	__reg16(OPSPUT_LCD_BASE + 0x300022)
+#define OPSPUT_LCD_ICUCR3	__reg16(OPSPUT_LCD_BASE + 0x300024)
+#define OPSPUT_LCD_ICUCR4	__reg16(OPSPUT_LCD_BASE + 0x300026)
+#define OPSPUT_LCD_ICUCR16	__reg16(OPSPUT_LCD_BASE + 0x300030)
+#define OPSPUT_LCD_ICUCR17	__reg16(OPSPUT_LCD_BASE + 0x300032)
+#define OPSPUT_LCD_ICUCR18	__reg16(OPSPUT_LCD_BASE + 0x300034)
+#define OPSPUT_LCD_ICUCR19	__reg16(OPSPUT_LCD_BASE + 0x300036)
+#define OPSPUT_LCD_ICUCR21	__reg16(OPSPUT_LCD_BASE + 0x30003a)
+
+#endif	/* _OPSPUT_OPSPUT_LCD_H */
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/include/asm-m32r/opsput/opsput_pld.h
new file mode 100644
index 000000000000..2018e6925035
--- /dev/null
+++ b/include/asm-m32r/opsput/opsput_pld.h
@@ -0,0 +1,259 @@
+/*
+ * include/asm/opsput/opsput_pld.h
+ *
+ * Definitions for Programable Logic Device(PLD) on OPSPUT board.
+ *
+ * Copyright (c) 2002	Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * $Id: opsput_pld.h,v 1.1 2004/07/27 06:54:20 sakugawa Exp $
+ */
+
+#ifndef _OPSPUT_OPSPUT_PLD_H
+#define _OPSPUT_OPSPUT_PLD_H
+
+#include <linux/config.h>
+
+#define PLD_PLAT_BASE		0x1cc00000
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define PLD_BASE		(PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
+#define __reg8			(volatile unsigned char *)
+#define __reg16			(volatile unsigned short *)
+#define __reg32			(volatile unsigned int *)
+#else
+#define PLD_BASE		(PLD_PLAT_BASE + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif	/* __ASSEMBLY__ */
+
+/* CFC */
+#define	PLD_CFRSTCR		__reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS		__reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK		__reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR		__reg16(PLD_BASE + 0x0006)
+#define PLD_CFVENCR		__reg16(PLD_BASE + 0x0008)
+#define PLD_CFCR0		__reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1		__reg16(PLD_BASE + 0x000c)
+#define PLD_IDERSTCR		__reg16(PLD_BASE + 0x0010)
+
+/* MMC */
+#define PLD_MMCCR		__reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD		__reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS		__reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR		__reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT		__reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT		__reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET		__reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP		__reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA		__reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA		__reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA		__reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA		__reg16(PLD_BASE + 0x7006)
+
+/* ICU
+ *  ICUISTS:	status register
+ *  ICUIREQ0: 	request register
+ *  ICUIREQ1: 	request register
+ *  ICUCR3:	control register for CFIREQ# interrupt
+ *  ICUCR4:	control register for CFC Card insert interrupt
+ *  ICUCR5:	control register for CFC Card eject interrupt
+ *  ICUCR6:	control register for external interrupt
+ *  ICUCR11:	control register for MMC Card insert/eject interrupt
+ *  ICUCR13:	control register for SC error interrupt
+ *  ICUCR14:	control register for SC receive interrupt
+ *  ICUCR15:	control register for SC send interrupt
+ *  ICUCR16:	control register for SIO0 receive interrupt
+ *  ICUCR17:	control register for SIO0 send interrupt
+ */
+#if !defined(CONFIG_PLAT_USRV)
+#define PLD_IRQ_INT0		(OPSPUT_PLD_IRQ_BASE + 0)	/* None */
+#define PLD_IRQ_INT1		(OPSPUT_PLD_IRQ_BASE + 1)	/* reserved */
+#define PLD_IRQ_INT2		(OPSPUT_PLD_IRQ_BASE + 2)	/* reserved */
+#define PLD_IRQ_CFIREQ		(OPSPUT_PLD_IRQ_BASE + 3)	/* CF IREQ */
+#define PLD_IRQ_CFC_INSERT	(OPSPUT_PLD_IRQ_BASE + 4)	/* CF Insert */
+#define PLD_IRQ_CFC_EJECT	(OPSPUT_PLD_IRQ_BASE + 5)	/* CF Eject */
+#define PLD_IRQ_EXINT		(OPSPUT_PLD_IRQ_BASE + 6)	/* EXINT */
+#define PLD_IRQ_INT7		(OPSPUT_PLD_IRQ_BASE + 7)	/* reserved */
+#define PLD_IRQ_INT8		(OPSPUT_PLD_IRQ_BASE + 8)	/* reserved */
+#define PLD_IRQ_INT9		(OPSPUT_PLD_IRQ_BASE + 9)	/* reserved */
+#define PLD_IRQ_INT10		(OPSPUT_PLD_IRQ_BASE + 10)	/* reserved */
+#define PLD_IRQ_MMCCARD		(OPSPUT_PLD_IRQ_BASE + 11)	/* MMC Insert/Eject */
+#define PLD_IRQ_INT12		(OPSPUT_PLD_IRQ_BASE + 12)	/* reserved */
+#define PLD_IRQ_SC_ERROR	(OPSPUT_PLD_IRQ_BASE + 13)	/* SC error */
+#define PLD_IRQ_SC_RCV		(OPSPUT_PLD_IRQ_BASE + 14)	/* SC receive */
+#define PLD_IRQ_SC_SND		(OPSPUT_PLD_IRQ_BASE + 15)	/* SC send */
+#define PLD_IRQ_SIO0_RCV	(OPSPUT_PLD_IRQ_BASE + 16)	/* SIO receive */
+#define PLD_IRQ_SIO0_SND	(OPSPUT_PLD_IRQ_BASE + 17)	/* SIO send */
+#define PLD_IRQ_INT18		(OPSPUT_PLD_IRQ_BASE + 18)	/* reserved */
+#define PLD_IRQ_INT19		(OPSPUT_PLD_IRQ_BASE + 19)	/* reserved */
+#define PLD_IRQ_INT20		(OPSPUT_PLD_IRQ_BASE + 20)	/* reserved */
+#define PLD_IRQ_INT21		(OPSPUT_PLD_IRQ_BASE + 21)	/* reserved */
+#define PLD_IRQ_INT22		(OPSPUT_PLD_IRQ_BASE + 22)	/* reserved */
+#define PLD_IRQ_INT23		(OPSPUT_PLD_IRQ_BASE + 23)	/* reserved */
+#define PLD_IRQ_INT24		(OPSPUT_PLD_IRQ_BASE + 24)	/* reserved */
+#define PLD_IRQ_INT25		(OPSPUT_PLD_IRQ_BASE + 25)	/* reserved */
+#define PLD_IRQ_INT26		(OPSPUT_PLD_IRQ_BASE + 26)	/* reserved */
+#define PLD_IRQ_INT27		(OPSPUT_PLD_IRQ_BASE + 27)	/* reserved */
+#define PLD_IRQ_INT28		(OPSPUT_PLD_IRQ_BASE + 28)	/* reserved */
+#define PLD_IRQ_INT29		(OPSPUT_PLD_IRQ_BASE + 29)	/* reserved */
+#define PLD_IRQ_INT30		(OPSPUT_PLD_IRQ_BASE + 30)	/* reserved */
+#define PLD_IRQ_INT31		(OPSPUT_PLD_IRQ_BASE + 31)	/* reserved */
+
+#else	/* CONFIG_PLAT_USRV */
+
+#define PLD_IRQ_INT0		(OPSPUT_PLD_IRQ_BASE + 0)	/* None */
+#define PLD_IRQ_INT1		(OPSPUT_PLD_IRQ_BASE + 1)	/* reserved */
+#define PLD_IRQ_INT2		(OPSPUT_PLD_IRQ_BASE + 2)	/* reserved */
+#define PLD_IRQ_CF0		(OPSPUT_PLD_IRQ_BASE + 3)	/* CF0# */
+#define PLD_IRQ_CF1		(OPSPUT_PLD_IRQ_BASE + 4)	/* CF1# */
+#define PLD_IRQ_CF2		(OPSPUT_PLD_IRQ_BASE + 5)	/* CF2# */
+#define PLD_IRQ_CF3		(OPSPUT_PLD_IRQ_BASE + 6)	/* CF3# */
+#define PLD_IRQ_CF4		(OPSPUT_PLD_IRQ_BASE + 7)	/* CF4# */
+#define PLD_IRQ_INT8		(OPSPUT_PLD_IRQ_BASE + 8)	/* reserved */
+#define PLD_IRQ_INT9		(OPSPUT_PLD_IRQ_BASE + 9)	/* reserved */
+#define PLD_IRQ_INT10		(OPSPUT_PLD_IRQ_BASE + 10)	/* reserved */
+#define PLD_IRQ_INT11		(OPSPUT_PLD_IRQ_BASE + 11)	/* reserved */
+#define PLD_IRQ_UART0		(OPSPUT_PLD_IRQ_BASE + 12)	/* UARTIRQ0 */
+#define PLD_IRQ_UART1		(OPSPUT_PLD_IRQ_BASE + 13)	/* UARTIRQ1 */
+#define PLD_IRQ_INT14		(OPSPUT_PLD_IRQ_BASE + 14)	/* reserved */
+#define PLD_IRQ_INT15		(OPSPUT_PLD_IRQ_BASE + 15)	/* reserved */
+#define PLD_IRQ_SNDINT		(OPSPUT_PLD_IRQ_BASE + 16)	/* SNDINT# */
+#define PLD_IRQ_INT17		(OPSPUT_PLD_IRQ_BASE + 17)	/* reserved */
+#define PLD_IRQ_INT18		(OPSPUT_PLD_IRQ_BASE + 18)	/* reserved */
+#define PLD_IRQ_INT19		(OPSPUT_PLD_IRQ_BASE + 19)	/* reserved */
+#define PLD_IRQ_INT20		(OPSPUT_PLD_IRQ_BASE + 20)	/* reserved */
+#define PLD_IRQ_INT21		(OPSPUT_PLD_IRQ_BASE + 21)	/* reserved */
+#define PLD_IRQ_INT22		(OPSPUT_PLD_IRQ_BASE + 22)	/* reserved */
+#define PLD_IRQ_INT23		(OPSPUT_PLD_IRQ_BASE + 23)	/* reserved */
+#define PLD_IRQ_INT24		(OPSPUT_PLD_IRQ_BASE + 24)	/* reserved */
+#define PLD_IRQ_INT25		(OPSPUT_PLD_IRQ_BASE + 25)	/* reserved */
+#define PLD_IRQ_INT26		(OPSPUT_PLD_IRQ_BASE + 26)	/* reserved */
+#define PLD_IRQ_INT27		(OPSPUT_PLD_IRQ_BASE + 27)	/* reserved */
+#define PLD_IRQ_INT28		(OPSPUT_PLD_IRQ_BASE + 28)	/* reserved */
+#define PLD_IRQ_INT29		(OPSPUT_PLD_IRQ_BASE + 29)	/* reserved */
+#define PLD_IRQ_INT30		(OPSPUT_PLD_IRQ_BASE + 30)	/* reserved */
+
+#endif	/* CONFIG_PLAT_USRV */
+
+#define PLD_ICUISTS		__reg16(PLD_BASE + 0x8002)
+#define PLD_ICUISTS_VECB_MASK	(0xf000)
+#define PLD_ICUISTS_VECB(x)	((x) & PLD_ICUISTS_VECB_MASK)
+#define PLD_ICUISTS_ISN_MASK	(0x07c0)
+#define PLD_ICUISTS_ISN(x)	((x) & PLD_ICUISTS_ISN_MASK)
+#define PLD_ICUIREQ0		__reg16(PLD_BASE + 0x8004)
+#define PLD_ICUIREQ1		__reg16(PLD_BASE + 0x8006)
+#define PLD_ICUCR1		__reg16(PLD_BASE + 0x8100)
+#define PLD_ICUCR2		__reg16(PLD_BASE + 0x8102)
+#define PLD_ICUCR3		__reg16(PLD_BASE + 0x8104)
+#define PLD_ICUCR4		__reg16(PLD_BASE + 0x8106)
+#define PLD_ICUCR5		__reg16(PLD_BASE + 0x8108)
+#define PLD_ICUCR6		__reg16(PLD_BASE + 0x810a)
+#define PLD_ICUCR7		__reg16(PLD_BASE + 0x810c)
+#define PLD_ICUCR8		__reg16(PLD_BASE + 0x810e)
+#define PLD_ICUCR9		__reg16(PLD_BASE + 0x8110)
+#define PLD_ICUCR10		__reg16(PLD_BASE + 0x8112)
+#define PLD_ICUCR11		__reg16(PLD_BASE + 0x8114)
+#define PLD_ICUCR12		__reg16(PLD_BASE + 0x8116)
+#define PLD_ICUCR13		__reg16(PLD_BASE + 0x8118)
+#define PLD_ICUCR14		__reg16(PLD_BASE + 0x811a)
+#define PLD_ICUCR15		__reg16(PLD_BASE + 0x811c)
+#define PLD_ICUCR16		__reg16(PLD_BASE + 0x811e)
+#define PLD_ICUCR17		__reg16(PLD_BASE + 0x8120)
+#define PLD_ICUCR_IEN		(0x1000)
+#define PLD_ICUCR_IREQ		(0x0100)
+#define PLD_ICUCR_ISMOD00	(0x0000)	/* Low edge */
+#define PLD_ICUCR_ISMOD01	(0x0010)	/* Low level */
+#define PLD_ICUCR_ISMOD02	(0x0020)	/* High edge */
+#define PLD_ICUCR_ISMOD03	(0x0030)	/* High level */
+#define PLD_ICUCR_ILEVEL0	(0x0000)
+#define PLD_ICUCR_ILEVEL1	(0x0001)
+#define PLD_ICUCR_ILEVEL2	(0x0002)
+#define PLD_ICUCR_ILEVEL3	(0x0003)
+#define PLD_ICUCR_ILEVEL4	(0x0004)
+#define PLD_ICUCR_ILEVEL5	(0x0005)
+#define PLD_ICUCR_ILEVEL6	(0x0006)
+#define PLD_ICUCR_ILEVEL7	(0x0007)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR		__reg16(PLD_BASE + 0x14000)
+#define PLD_CPCR_CF		0x0001
+#define PLD_CPCR_MMC		0x0002
+
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR		__reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON		0x001
+#define PLD_IOLED_1_OFF		0x000
+#define PLD_IOLED_2_ON		0x002
+#define PLD_IOLED_2_OFF		0x000
+
+/* DIP Switch
+ *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ *  1: -
+ *  2: -
+ *  3: -
+ */
+#define PLD_IOSWSTS		__reg16(PLD_BASE + 0x14004)
+#define	PLD_IOSWSTS_IOSW2	0x0200
+#define	PLD_IOSWSTS_IOSW1	0x0100
+#define	PLD_IOSWSTS_IOWP0	0x0001
+
+/* CRC */
+#define PLD_CRC7DATA		__reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA		__reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA		__reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA		__reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)
+
+/* RTC */
+#define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR		__reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA		__reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA		__reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT		__reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR		__reg16(PLD_BASE + 0x20000)
+#define	PLD_ESIO0CR_TXEN	0x0001
+#define	PLD_ESIO0CR_RXEN	0x0002
+#define PLD_ESIO0MOD0		__reg16(PLD_BASE + 0x20002)
+#define	PLD_ESIO0MOD0_CTSS	0x0040
+#define	PLD_ESIO0MOD0_RTSS	0x0080
+#define PLD_ESIO0MOD1		__reg16(PLD_BASE + 0x20004)
+#define	PLD_ESIO0MOD1_LMFS	0x0010
+#define PLD_ESIO0STS		__reg16(PLD_BASE + 0x20006)
+#define	PLD_ESIO0STS_TEMP	0x0001
+#define	PLD_ESIO0STS_TXCP	0x0002
+#define	PLD_ESIO0STS_RXCP	0x0004
+#define	PLD_ESIO0STS_TXSC	0x0100
+#define	PLD_ESIO0STS_RXSC	0x0200
+#define PLD_ESIO0STS_TXREADY	(PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR		__reg16(PLD_BASE + 0x20008)
+#define	PLD_ESIO0INTCR_TXIEN	0x0002
+#define	PLD_ESIO0INTCR_RXCEN	0x0004
+#define PLD_ESIO0BAUR		__reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB		__reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB		__reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR		__reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD		__reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS		__reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR		__reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR		__reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB		__reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB		__reg16(PLD_BASE + 0x3800e)
+
+#endif	/* _OPSPUT_OPSPUT_PLD.H */
diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h
new file mode 100644
index 000000000000..1c6abb9f3f1f
--- /dev/null
+++ b/include/asm-m32r/page.h
@@ -0,0 +1,115 @@
+#ifndef _ASM_M32R_PAGE_H
+#define _ASM_M32R_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte)
+#define PTE_MASK	PAGE_MASK
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+
+
+/* This handles the memory map.. */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (PAGE_SHIFT - 1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+
+	return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define __MEMORY_START  CONFIG_MEMORY_START
+#define __MEMORY_SIZE   CONFIG_MEMORY_SIZE
+
+#ifdef CONFIG_MMU
+#define __PAGE_OFFSET  (0x80000000)
+#else
+#define __PAGE_OFFSET  (0x00000000)
+#endif
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x) + PAGE_OFFSET))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define PFN_BASE		(CONFIG_MEMORY_START >> PAGE_SHIFT)
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - PFN_BASE))
+#define page_to_pfn(page)	\
+	((unsigned long)((page) - mem_map) + PFN_BASE)
+#define pfn_valid(pfn)		(((pfn) - PFN_BASE) < max_mapnr)
+#endif  /* !CONFIG_DISCONTIGMEM */
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC )
+
+#define devmem_is_allowed(x) 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_PAGE_H */
+
diff --git a/include/asm-m32r/param.h b/include/asm-m32r/param.h
new file mode 100644
index 000000000000..750b938ccb52
--- /dev/null
+++ b/include/asm-m32r/param.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_M32R_PARAM_H
+#define _ASM_M32R_PARAM_H
+
+/* $Id$ */
+
+/* orig : i386 2.5.67 */
+
+#ifdef __KERNEL__
+# define HZ		100		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_M32R_PARAM_H */
+
diff --git a/include/asm-m32r/pci.h b/include/asm-m32r/pci.h
new file mode 100644
index 000000000000..00d7b6f39a33
--- /dev/null
+++ b/include/asm-m32r/pci.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_M32R_PCI_H
+#define _ASM_M32R_PCI_H
+
+/* $Id$ */
+
+#include <asm-generic/pci.h>
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#endif /* _ASM_M32R_PCI_H */
diff --git a/include/asm-m32r/percpu.h b/include/asm-m32r/percpu.h
new file mode 100644
index 000000000000..e3169301fe66
--- /dev/null
+++ b/include/asm-m32r/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_M32R_PERCPU__
+#define __ARCH_M32R_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M32R_PERCPU__ */
diff --git a/include/asm-m32r/pgalloc.h b/include/asm-m32r/pgalloc.h
new file mode 100644
index 000000000000..6da309b6fda7
--- /dev/null
+++ b/include/asm-m32r/pgalloc.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_M32R_PGALLOC_H
+#define _ASM_M32R_PGALLOC_H
+
+/* $Id$ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+#include <asm/io.h>
+
+#define pmd_populate_kernel(mm, pmd, pte)	\
+	set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+
+static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	struct page *pte)
+{
+	set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+
+	return pgd;
+}
+
+static __inline__ void pgd_free(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+
+	return pte;
+}
+
+static __inline__ struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO);
+
+
+	return pte;
+}
+
+static __inline__ void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static __inline__ void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((pte))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_M32R_PGALLOC_H */
+
diff --git a/include/asm-m32r/pgtable-2level.h b/include/asm-m32r/pgtable-2level.h
new file mode 100644
index 000000000000..861727c20e8f
--- /dev/null
+++ b/include/asm-m32r/pgtable-2level.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_M32R_PGTABLE_2LEVEL_H
+#define _ASM_M32R_PGTABLE_2LEVEL_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * traditional M32R two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * the M32R is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+#define PMD_SHIFT	22
+#define PTRS_PER_PMD	1
+
+#define PTRS_PER_PTE	1024
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)	{ return 0; }
+static inline int pgd_bad(pgd_t pgd)	{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+#define pgd_clear(xp)				do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define set_pte_atomic(pteptr, pteval)	set_pte(pteptr, pteval)
+/*
+ * (pmds are folded into pgds so this doesnt get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
+
+#define pgd_page(pgd) \
+((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+#define ptep_get_and_clear(mm,addr,xp)	__pte(xchg(&(xp)->pte, 0))
+#define pte_same(a, b)		(pte_val(a) == pte_val(b))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_none(x)		(!pte_val(x))
+#define pte_pfn(x)		(pte_val(x) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(((pte_val(pte) >> 2) & 0xef) | (((pte_val(pte) >> 10)) << 7))
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0xef) << 2) | (((off) >> 7) << 10) | _PAGE_FILE })
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */
diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
new file mode 100644
index 000000000000..70a0eb68fdf6
--- /dev/null
+++ b/include/asm-m32r/pgtable.h
@@ -0,0 +1,400 @@
+#ifndef _ASM_M32R_PGTABLE_H
+#define _ASM_M32R_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * the M32R, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * M32R mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the M32R page table tree.
+ */
+
+/* CAUTION!: If you change macro definitions in this file, you might have to
+ * change arch/m32r/mmu.S manually.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/addrspace.h>
+#include <asm/bitops.h>
+#include <asm/page.h>
+
+extern pgd_t swapper_pg_dir[1024];
+extern void paging_init(void);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+#include <asm/pgtable-2level.h>
+#endif
+
+#define pgtable_cache_init()	do { } while (0)
+
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE - 1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#ifndef __ASSEMBLY__
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_START		KSEG2
+#define VMALLOC_END		KSEG3
+
+/*
+ *     M32R TLB format
+ *
+ *     [0]    [1:19]           [20:23]       [24:31]
+ *     +-----------------------+----+-------------+
+ *     |          VPN          |0000|    ASID     |
+ *     +-----------------------+----+-------------+
+ *     +-+---------------------+----+-+---+-+-+-+-+
+ *     |0         PPN          |0000|N|AC |L|G|V| |
+ *     +-+---------------------+----+-+---+-+-+-+-+
+ *                                     RWX
+ */
+
+#define _PAGE_BIT_DIRTY		0	/* software: page changed */
+#define _PAGE_BIT_FILE		0	/* when !present: nonlinear file
+					   mapping */
+#define _PAGE_BIT_PRESENT	1	/* Valid: page is valid */
+#define _PAGE_BIT_GLOBAL	2	/* Global */
+#define _PAGE_BIT_LARGE		3	/* Large */
+#define _PAGE_BIT_EXEC		4	/* Execute */
+#define _PAGE_BIT_WRITE		5	/* Write */
+#define _PAGE_BIT_READ		6	/* Read */
+#define _PAGE_BIT_NONCACHABLE	7	/* Non cachable */
+#define _PAGE_BIT_ACCESSED	8	/* software: page referenced */
+#define _PAGE_BIT_PROTNONE	9	/* software: if not present */
+
+#define _PAGE_DIRTY		(1UL << _PAGE_BIT_DIRTY)
+#define _PAGE_FILE		(1UL << _PAGE_BIT_FILE)
+#define _PAGE_PRESENT		(1UL << _PAGE_BIT_PRESENT)
+#define _PAGE_GLOBAL		(1UL << _PAGE_BIT_GLOBAL)
+#define _PAGE_LARGE		(1UL << _PAGE_BIT_LARGE)
+#define _PAGE_EXEC		(1UL << _PAGE_BIT_EXEC)
+#define _PAGE_WRITE		(1UL << _PAGE_BIT_WRITE)
+#define _PAGE_READ		(1UL << _PAGE_BIT_READ)
+#define _PAGE_NONCACHABLE	(1UL << _PAGE_BIT_NONCACHABLE)
+#define _PAGE_ACCESSED		(1UL << _PAGE_BIT_ACCESSED)
+#define _PAGE_PROTNONE		(1UL << _PAGE_BIT_PROTNONE)
+
+#define _PAGE_TABLE	\
+	( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
+	| _PAGE_DIRTY )
+#define _KERNPG_TABLE	\
+	( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
+	| _PAGE_DIRTY )
+#define _PAGE_CHG_MASK	\
+	( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY )
+
+#ifdef CONFIG_MMU
+#define PAGE_NONE	\
+	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	\
+	__pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_SHARED_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \
+		| _PAGE_ACCESSED)
+#define PAGE_COPY	\
+	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_COPY_EXEC	\
+	__pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_READONLY	\
+	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_READONLY_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL	\
+	( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \
+	| _PAGE_ACCESSED )
+#define __PAGE_KERNEL_RO	( __PAGE_KERNEL & ~_PAGE_WRITE )
+#define __PAGE_KERNEL_NOCACHE	( __PAGE_KERNEL | _PAGE_NONCACHABLE)
+
+#define MAKE_GLOBAL(x)	__pgprot((x) | _PAGE_GLOBAL)
+
+#define PAGE_KERNEL		MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO		MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE	MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#else
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_SHARED_EXEC	__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_COPY_EXEC		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_READONLY_EXEC	__pgprot(0)
+
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#endif /* CONFIG_MMU */
+
+	/* xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/* page table for 0-4MB for everybody */
+
+#define pte_present(x)	(pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE)
+
+#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_READ;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_EXEC;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_WRITE;
+}
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_READ;
+	return pte;
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_EXEC;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_DIRTY;
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_ACCESSED;
+	return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_EXEC;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_DIRTY;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	return pte;
+}
+
+static inline  int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	return test_and_clear_bit(_PAGE_BIT_DIRTY, ptep);
+}
+
+static inline  int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	clear_bit(_PAGE_BIT_WRITE, ptep);
+}
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot |= _PAGE_NONCACHABLE;
+	return __pgprot(prot);
+}
+
+#define pgprot_writecombine(prot) pgprot_noncached(prot)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \
+		| pgprot_val(newprot)));
+
+	return pte;
+}
+
+#define page_pte(page)	page_pte_prot(page, __pgprot(0))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+{
+	pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK);
+}
+
+#define pmd_page_kernel(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)	(mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE))
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	\
+	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+#define pmd_index(address)	\
+	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+#define pte_index(address)	\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address)	\
+	((pte_t *)pmd_page_kernel(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)	\
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address)	pte_offset_map(dir, address)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 2) & 0x3f)
+#define __swp_offset(x)			((x).val >> 10)
+#define __swp_entry(type, offset)	\
+	((swp_entry_t) { ((type) << 2) | ((offset) << 10) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)	\
+	remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_PGTABLE_H */
diff --git a/include/asm-m32r/poll.h b/include/asm-m32r/poll.h
new file mode 100644
index 000000000000..43b7acf732d5
--- /dev/null
+++ b/include/asm-m32r/poll.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_M32R_POLL_H
+#define _ASM_M32R_POLL_H
+
+/*
+ * poll(2) bit definitions.  Based on <asm-i386/poll.h>.
+ *
+ * Modified 2004
+ *      Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif  /* _ASM_M32R_POLL_H */
diff --git a/include/asm-m32r/posix_types.h b/include/asm-m32r/posix_types.h
new file mode 100644
index 000000000000..47e7e85a3dc3
--- /dev/null
+++ b/include/asm-m32r/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_M32R_POSIX_TYPES_H
+#define _ASM_M32R_POSIX_TYPES_H
+
+/* $Id$ */
+
+/* orig : i386, sh 2.4.18 */
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif  /* _ASM_M32R_POSIX_TYPES_H */
diff --git a/include/asm-m32r/processor.h b/include/asm-m32r/processor.h
new file mode 100644
index 000000000000..09fd1813e780
--- /dev/null
+++ b/include/asm-m32r/processor.h
@@ -0,0 +1,143 @@
+#ifndef _ASM_M32R_PROCESSOR_H
+#define _ASM_M32R_PROCESSOR_H
+
+/*
+ * include/asm-m32r/processor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994  Linus Torvalds
+ * Copyright (C) 2001  Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>  /* pt_regs */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct cpuinfo_m32r {
+	unsigned long pgtable_cache_sz;
+	unsigned long cpu_clock;
+	unsigned long bus_clock;
+	unsigned long timer_divide;
+	unsigned long loops_per_jiffy;
+};
+
+/*
+ * capabilities of CPUs
+ */
+
+extern struct cpuinfo_m32r boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_m32r cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/*
+ * User space process size: 2GB (default).
+ */
+#ifdef CONFIG_MMU
+#define TASK_SIZE  (0x80000000UL)
+#else
+#define TASK_SIZE  (0x00400000UL)
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAX_TRAPS 10
+
+struct debug_trap {
+	int nr_trap;
+	unsigned long	addr[MAX_TRAPS];
+	unsigned long	insn[MAX_TRAPS];
+};
+
+struct thread_struct {
+	unsigned long address;
+	unsigned long trap_no;		/* Trap number  */
+	unsigned long error_code;	/* Error code of trap */
+	unsigned long lr;		/* saved pc */
+	unsigned long sp;		/* user stack pointer */
+	struct debug_trap debug_trap;
+};
+
+#define INIT_SP	(sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD	{	\
+	.sp = INIT_SP,		\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+
+/* User process Backup PSW */
+#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM)
+
+#define start_thread(regs, new_pc, new_spu) 				\
+	do {								\
+		set_fs(USER_DS); 					\
+		regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL;	\
+		regs->bpc = new_pc;					\
+		regs->spu = new_spu;					\
+	} while (0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+extern void copy_segments(struct task_struct *p, struct mm_struct * mm);
+extern void release_segments(struct mm_struct * mm);
+
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)  do { } while (0)
+#define release_segments(mm)  do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+#define KSTK_EIP(tsk)  ((tsk)->thread.lr)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+#define cpu_relax()	barrier()
+
+#endif /* _ASM_M32R_PROCESSOR_H */
diff --git a/include/asm-m32r/ptrace.h b/include/asm-m32r/ptrace.h
new file mode 100644
index 000000000000..976417126b2d
--- /dev/null
+++ b/include/asm-m32r/ptrace.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_M32R_PTRACE_H
+#define _ASM_M32R_PTRACE_H
+
+/*
+ * linux/include/asm-m32r/ptrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * M32R version:
+ *   Copyright (C) 2001-2002, 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+#include <asm/m32r.h>		/* M32R_PSW_BSM, M32R_PSW_BPM */
+
+/* 0 - 13 are integer registers (general purpose registers).  */
+#define PT_R4		0
+#define PT_R5		1
+#define PT_R6		2
+#define PT_REGS 	3
+#define PT_R0		4
+#define PT_R1		5
+#define PT_R2		6
+#define PT_R3		7
+#define PT_R7		8
+#define PT_R8		9
+#define PT_R9		10
+#define PT_R10		11
+#define PT_R11		12
+#define PT_R12		13
+#define PT_SYSCNR	14
+#define PT_R13		PT_FP
+#define PT_R14		PT_LR
+#define PT_R15		PT_SP
+
+/* processor status and miscellaneous context registers.  */
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+#define PT_ACC0H	15
+#define PT_ACC0L	16
+#define PT_ACC1H	17
+#define PT_ACC1L	18
+#define PT_ACCH		PT_ACC0H
+#define PT_ACCL		PT_ACC0L
+#define PT_PSW		19
+#define PT_BPC		20
+#define PT_BBPSW	21
+#define PT_BBPC		22
+#define PT_SPU		23
+#define PT_FP		24
+#define PT_LR		25
+#define PT_SPI		26
+#define PT_ORIGR0	27
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+#define PT_ACCH		15
+#define PT_ACCL		16
+#define PT_PSW		17
+#define PT_BPC		18
+#define PT_BBPSW	19
+#define PT_BBPC		20
+#define PT_SPU		21
+#define PT_FP		22
+#define PT_LR		23
+#define PT_SPI		24
+#define PT_ORIGR0	25
+#else
+#error unknown isa conifiguration
+#endif
+
+/* virtual pt_reg entry for gdb */
+#define PT_PC		30
+#define PT_CBR		31
+#define PT_EVB		32
+
+
+/* Control registers.  */
+#define SPR_CR0 PT_PSW
+#define SPR_CR1 PT_CBR		/* read only */
+#define SPR_CR2 PT_SPI
+#define SPR_CR3 PT_SPU
+#define SPR_CR4
+#define SPR_CR5 PT_EVB		/* part of M32R/E, M32R/I core only */
+#define SPR_CR6 PT_BPC
+#define SPR_CR7
+#define SPR_CR8 PT_BBPSW
+#define SPR_CR9
+#define SPR_CR10
+#define SPR_CR11
+#define SPR_CR12
+#define SPR_CR13 PT_WR
+#define SPR_CR14 PT_BBPC
+#define SPR_CR15
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+struct pt_regs {
+	/* Saved main processor registers. */
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	struct pt_regs *pt_regs;
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	long syscall_nr;
+
+	/* Saved main processor status and miscellaneous context registers. */
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	unsigned long acc0h;
+	unsigned long acc0l;
+	unsigned long acc1h;
+	unsigned long acc1l;
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	unsigned long acch;
+	unsigned long accl;
+#else
+#error unknown isa configuration
+#endif
+	unsigned long psw;
+	unsigned long bpc;		/* saved PC for TRAP syscalls */
+	unsigned long bbpsw;
+	unsigned long bbpc;
+	unsigned long spu;		/* saved user stack */
+	unsigned long fp;
+	unsigned long lr;		/* saved PC for JL syscalls */
+	unsigned long spi;		/* saved kernel stack */
+	unsigned long orig_r0;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
+#define PTRACE_OLDSETOPTIONS	21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD	0x00000001
+
+#ifdef __KERNEL__
+#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2)
+#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0)
+#elif defined(CONFIG_ISA_M32R)
+#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0)
+#else
+#error unknown isa configuration
+#endif
+
+#define instruction_pointer(regs) ((regs)->bpc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern void show_regs(struct pt_regs *);
+
+extern void withdraw_debug_trap(struct pt_regs *regs);
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_M32R_PTRACE_H */
diff --git a/include/asm-m32r/resource.h b/include/asm-m32r/resource.h
new file mode 100644
index 000000000000..b1ce766e37a0
--- /dev/null
+++ b/include/asm-m32r/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M32R_RESOURCE_H
+#define _ASM_M32R_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif  /* _ASM_M32R_RESOURCE_H */
diff --git a/include/asm-m32r/rtc.h b/include/asm-m32r/rtc.h
new file mode 100644
index 000000000000..ec3cdf666c68
--- /dev/null
+++ b/include/asm-m32r/rtc.h
@@ -0,0 +1,70 @@
+/* $Id: rtc.h,v 1.1.1.1 2004/03/25 04:29:22 hitoshiy Exp $ */
+
+#ifndef __RTC_H__
+#define __RTC_H__
+
+
+#include <linux/config.h>
+
+   /* Dallas DS1302 clock/calendar register numbers. */
+#  define RTC_SECONDS      0
+#  define RTC_MINUTES      1
+#  define RTC_HOURS        2
+#  define RTC_DAY_OF_MONTH 3
+#  define RTC_MONTH        4
+#  define RTC_WEEKDAY      5
+#  define RTC_YEAR         6
+#  define RTC_CONTROL      7
+
+   /* Bits in CONTROL register. */
+#  define RTC_CONTROL_WRITEPROTECT 	0x80
+#  define RTC_TRICKLECHARGER 		8
+
+  /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
+#  define RTC_TCR_PATTERN 	0xA0	/* 1010xxxx */
+#  define RTC_TCR_1DIOD 	0x04	/* xxxx01xx */
+#  define RTC_TCR_2DIOD 	0x08	/* xxxx10xx */
+#  define RTC_TCR_DISABLED 	0x00	/* xxxxxx00 Disabled */
+#  define RTC_TCR_2KOHM 	0x01	/* xxxxxx01 2KOhm */
+#  define RTC_TCR_4KOHM 	0x02	/* xxxxxx10 4kOhm */
+#  define RTC_TCR_8KOHM 	0x03	/* xxxxxx11 8kOhm */
+
+#ifdef CONFIG_DS1302
+extern unsigned char ds1302_readreg(int reg);
+extern void ds1302_writereg(int reg, unsigned char val);
+extern int ds1302_init(void);
+#  define CMOS_READ(x) ds1302_readreg(x)
+#  define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
+#  define RTC_INIT() ds1302_init()
+#else
+  /* No RTC configured so we shouldn't try to access any. */
+#  define CMOS_READ(x) 42
+#  define CMOS_WRITE(x,y)
+#  define RTC_INIT() (-1)
+#endif
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/* ioctl() calls that are permitted to the /dev/rtc interface. */
+#define RTC_MAGIC 'p'
+#define RTC_RD_TIME		_IOR(RTC_MAGIC, 0x09, struct rtc_time)	/* Read RTC time. */
+#define RTC_SET_TIME		_IOW(RTC_MAGIC, 0x0a, struct rtc_time)	/* Set RTC time. */
+#define RTC_SET_CHARGE  	_IOW(RTC_MAGIC, 0x0b, int)
+#define RTC_MAX_IOCTL 0x0b
+
+#endif /* __RTC_H__ */
diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h
new file mode 100644
index 000000000000..09a10e43bf0f
--- /dev/null
+++ b/include/asm-m32r/scatterlist.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_M32R_SCATTERLIST_H
+#define _ASM_M32R_SCATTERLIST_H
+
+/* $Id$ */
+
+struct scatterlist {
+    char *  address;    /* Location data is to be transferred to, NULL for
+                         * highmem page */
+    struct page * page; /* Location for highmem page, if any */
+    unsigned int offset;/* for highmem, page offset */
+
+    dma_addr_t dma_address;
+    unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x1fffffff)
+
+#endif /* _ASM_M32R_SCATTERLIST_H */
diff --git a/include/asm-m32r/sections.h b/include/asm-m32r/sections.h
new file mode 100644
index 000000000000..6b969e53b806
--- /dev/null
+++ b/include/asm-m32r/sections.h
@@ -0,0 +1,8 @@
+#ifndef _M32R_SECTIONS_H
+#define _M32R_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif	/* _M32R_SECTIONS_H */
+
diff --git a/include/asm-m32r/segment.h b/include/asm-m32r/segment.h
new file mode 100644
index 000000000000..e45db68e6c2d
--- /dev/null
+++ b/include/asm-m32r/segment.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_M32R_SEGMENT_H
+#define _ASM_M32R_SEGMENT_H
+
+/* $Id$ */
+
+/* orig : i386 (2.4.18) */
+
+#define __KERNEL_CS	0x10
+#define __KERNEL_DS	0x18
+
+#define __USER_CS	0x23
+#define __USER_DS	0x2B
+
+#endif  /* _ASM_M32R_SEGMENT_H */
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
new file mode 100644
index 000000000000..53e3c60f21ec
--- /dev/null
+++ b/include/asm-m32r/semaphore.h
@@ -0,0 +1,205 @@
+#ifndef _ASM_M32R_SEMAPHORE_H
+#define _ASM_M32R_SEMAPHORE_H
+
+#include <linux/linkage.h>
+
+#ifdef __KERNEL__
+
+/*
+ * SMP- and interrupt-safe semaphores..
+ *
+ * Copyright (C) 1996  Linus Torvalds
+ * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+/*
+ *	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+ *
+ * i'd rather use the more flexible initialization above, but sadly
+ * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well.
+ */
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+/*
+ * Atomically decrement the semaphore's count.  If it goes negative,
+ * block the calling thread in the TASK_UNINTERRUPTIBLE state.
+ */
+static inline void down(struct semaphore * sem)
+{
+	unsigned long flags;
+	long count;
+
+	might_sleep();
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# down				\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (count)
+		: "r" (&sem->count)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	if (unlikely(count < 0))
+		__down(sem);
+}
+
+/*
+ * Interruptible try to acquire a semaphore.  If we obtained
+ * it, return zero.  If we were interrupted, returns -EINTR
+ */
+static inline int down_interruptible(struct semaphore * sem)
+{
+	unsigned long flags;
+	long count;
+	int result = 0;
+
+	might_sleep();
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# down_interruptible		\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (count)
+		: "r" (&sem->count)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	if (unlikely(count < 0))
+		result = __down_interruptible(sem);
+
+	return result;
+}
+
+/*
+ * Non-blockingly attempt to down() a semaphore.
+ * Returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore * sem)
+{
+	unsigned long flags;
+	long count;
+	int result = 0;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# down_trylock			\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (count)
+		: "r" (&sem->count)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	if (unlikely(count < 0))
+		result = __down_trylock(sem);
+
+	return result;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	unsigned long flags;
+	long count;
+
+	local_irq_save(flags);
+	__asm__ __volatile__ (
+		"# up				\n\t"
+		DCACHE_CLEAR("%0", "r4", "%1")
+		M32R_LOCK" %0, @%1;		\n\t"
+		"addi	%0, #1;			\n\t"
+		M32R_UNLOCK" %0, @%1;		\n\t"
+		: "=&r" (count)
+		: "r" (&sem->count)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+	local_irq_restore(flags);
+
+	if (unlikely(count <= 0))
+		__up(sem);
+}
+
+#endif  /* __KERNEL__ */
+
+#endif  /* _ASM_M32R_SEMAPHORE_H */
diff --git a/include/asm-m32r/sembuf.h b/include/asm-m32r/sembuf.h
new file mode 100644
index 000000000000..e69018e6ff71
--- /dev/null
+++ b/include/asm-m32r/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_M32R_SEMBUF_H
+#define _ASM_M32R_SEMBUF_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * The semid64_ds structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_M32R_SEMBUF_H */
diff --git a/include/asm-m32r/serial.h b/include/asm-m32r/serial.h
new file mode 100644
index 000000000000..1bf480f58493
--- /dev/null
+++ b/include/asm-m32r/serial.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_M32R_SERIAL_H
+#define _ASM_M32R_SERIAL_H
+
+/* include/asm-m32r/serial.h */
+
+#include <linux/config.h>
+
+#define BASE_BAUD	115200
+
+#endif  /* _ASM_M32R_SERIAL_H */
diff --git a/include/asm-m32r/setup.h b/include/asm-m32r/setup.h
new file mode 100644
index 000000000000..5f028dc26a9b
--- /dev/null
+++ b/include/asm-m32r/setup.h
@@ -0,0 +1,33 @@
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM			((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY	(*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS		(*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV		(*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE		(*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x014))
+
+#define M32R_CPUCLK		(*(unsigned long *) (PARAM+0x018))
+#define M32R_BUSCLK		(*(unsigned long *) (PARAM+0x01c))
+#define M32R_TIMER_DIVIDE	(*(unsigned long *) (PARAM+0x020))
+
+#define COMMAND_LINE		((char *) (PARAM+0x100))
+
+#define SCREEN_INFO		(*(struct screen_info *) (PARAM+0x200))
+
+#define COMMAND_LINE_SIZE	(512)
+
+#define RAMDISK_IMAGE_START_MASK	(0x07FF)
+#define RAMDISK_PROMPT_FLAG		(0x8000)
+#define RAMDISK_LOAD_FLAG		(0x4000)
+
+#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
diff --git a/include/asm-m32r/shmbuf.h b/include/asm-m32r/shmbuf.h
new file mode 100644
index 000000000000..b84e897fa87b
--- /dev/null
+++ b/include/asm-m32r/shmbuf.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_M32R_SHMBUF_H
+#define _ASM_M32R_SHMBUF_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+/*
+ * The shmid64_ds structure for M32R architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_M32R_SHMBUF_H */
diff --git a/include/asm-m32r/shmparam.h b/include/asm-m32r/shmparam.h
new file mode 100644
index 000000000000..db0019ba955d
--- /dev/null
+++ b/include/asm-m32r/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_M32R_SHMPARAM_H
+#define _ASM_M32R_SHMPARAM_H
+
+/* $Id$ */
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASM_M32R_SHMPARAM_H */
diff --git a/include/asm-m32r/sigcontext.h b/include/asm-m32r/sigcontext.h
new file mode 100644
index 000000000000..c233e2def2a3
--- /dev/null
+++ b/include/asm-m32r/sigcontext.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_M32R_SIGCONTEXT_H
+#define _ASM_M32R_SIGCONTEXT_H
+
+/* $Id$ */
+
+#include <linux/config.h>
+
+struct sigcontext {
+	/* CPU registers */
+	/* Saved main processor registers. */
+	unsigned long sc_r4;
+	unsigned long sc_r5;
+	unsigned long sc_r6;
+	struct pt_regs *sc_pt_regs;
+	unsigned long sc_r0;
+	unsigned long sc_r1;
+	unsigned long sc_r2;
+	unsigned long sc_r3;
+	unsigned long sc_r7;
+	unsigned long sc_r8;
+	unsigned long sc_r9;
+	unsigned long sc_r10;
+	unsigned long sc_r11;
+	unsigned long sc_r12;
+
+	/* Saved main processor status and miscellaneous context registers. */
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+	unsigned long sc_acc0h;
+	unsigned long sc_acc0l;
+	unsigned long sc_acc1h;
+	unsigned long sc_acc1l;
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	unsigned long sc_acch;
+	unsigned long sc_accl;
+#else
+#error unknown isa configuration
+#endif
+	unsigned long sc_psw;
+	unsigned long sc_bpc;		/* saved PC for TRAP syscalls */
+	unsigned long sc_bbpsw;
+	unsigned long sc_bbpc;
+	unsigned long sc_spu;		/* saved user stack */
+	unsigned long sc_fp;
+	unsigned long sc_lr;		/* saved PC for JL syscalls */
+	unsigned long sc_spi;		/* saved kernel stack */
+
+	unsigned long	oldmask;
+};
+
+#endif  /* _ASM_M32R_SIGCONTEXT_H */
diff --git a/include/asm-m32r/siginfo.h b/include/asm-m32r/siginfo.h
new file mode 100644
index 000000000000..482202f2e77f
--- /dev/null
+++ b/include/asm-m32r/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef _M32R_SIGINFO_H
+#define _M32R_SIGINFO_H
+
+/* $Id$ */
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _M32R_SIGINFO_H */
diff --git a/include/asm-m32r/signal.h b/include/asm-m32r/signal.h
new file mode 100644
index 000000000000..ce46eaea4494
--- /dev/null
+++ b/include/asm-m32r/signal.h
@@ -0,0 +1,200 @@
+#ifndef _ASM_M32R_SIGNAL_H
+#define _ASM_M32R_SIGNAL_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#undef __HAVE_ARCH_SIG_BITOPS
+
+struct pt_regs;
+extern int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset));
+
+#define ptrace_signal_deliver(regs, cookie)	do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif  /* _ASM_M32R_SIGNAL_H */
diff --git a/include/asm-m32r/smp.h b/include/asm-m32r/smp.h
new file mode 100644
index 000000000000..8cd4d0da4be1
--- /dev/null
+++ b/include/asm-m32r/smp.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_M32R_SMP_H
+#define _ASM_M32R_SMP_H
+
+/* $Id$ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <asm/m32r.h>
+
+#define PHYSID_ARRAY_SIZE       1
+
+struct physid_mask
+{
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)                 set_bit(physid, (map).mask)
+#define physid_clear(physid, map)               clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)               test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)        test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)            bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_or(dst, src1, src2)             bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_clear(map)                      bitmap_zero((map).mask, MAX_APICS)
+#define physids_complement(dst, src)            bitmap_complement((dst).mask,(src).mask, MAX_APICS)
+#define physids_empty(map)                      bitmap_empty((map).mask, MAX_APICS)
+#define physids_equal(map1, map2)               bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+#define physids_weight(map)                     bitmap_weight((map).mask, MAX_APICS)
+#define physids_shift_right(d, s, n)            bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+#define physids_shift_left(d, s, n)             bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+#define physids_coerce(map)                     ((map).mask[0])
+
+#define physids_promote(physids)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		__physid_mask.mask[0] = physids;			\
+		__physid_mask;						\
+	})
+
+#define physid_mask_of_physid(physid)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		physid_set(physid, __physid_mask);			\
+		__physid_mask;						\
+	})
+
+#define PHYSID_MASK_ALL         { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE        { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+/*
+ * Some lowlevel functions might want to know about
+ * the real CPU ID <-> CPU # mapping.
+ */
+extern volatile int physid_2_cpu[NR_CPUS];
+extern volatile int cpu_2_physid[NR_CPUS];
+#define physid_to_cpu(physid)	physid_2_cpu[physid]
+#define cpu_to_physid(cpu_id)	cpu_2_physid[cpu_id]
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+extern cpumask_t cpu_callout_map;
+#define cpu_possible_map cpu_callout_map
+
+static __inline__ int hard_smp_processor_id(void)
+{
+	return (int)*(volatile long *)M32R_CPUID_PORTL;
+}
+
+static __inline__ int cpu_logical_map(int cpu)
+{
+	return cpu;
+}
+
+static __inline__ int cpu_number_map(int cpu)
+{
+	return cpu;
+}
+
+static __inline__ unsigned int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+
+extern void smp_send_timer(void);
+extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
+
+#endif	/* not __ASSEMBLY__ */
+
+#define NO_PROC_ID (0xff)	/* No processor magic marker */
+
+#define PROC_CHANGE_PENALTY	(15)	/* Schedule penalty */
+
+/*
+ * M32R-mp IPI
+ */
+#define RESCHEDULE_IPI		(M32R_IRQ_IPI0-M32R_IRQ_IPI0)
+#define INVALIDATE_TLB_IPI	(M32R_IRQ_IPI1-M32R_IRQ_IPI0)
+#define CALL_FUNCTION_IPI	(M32R_IRQ_IPI2-M32R_IRQ_IPI0)
+#define LOCAL_TIMER_IPI		(M32R_IRQ_IPI3-M32R_IRQ_IPI0)
+#define INVALIDATE_CACHE_IPI	(M32R_IRQ_IPI4-M32R_IRQ_IPI0)
+#define CPU_BOOT_IPI		(M32R_IRQ_IPI5-M32R_IRQ_IPI0)
+
+#define IPI_SHIFT	(0)
+#define NR_IPIS		(8)
+
+#endif	/* CONFIG_SMP */
+
+#endif	/* _ASM_M32R_SMP_H */
diff --git a/include/asm-m32r/socket.h b/include/asm-m32r/socket.h
new file mode 100644
index 000000000000..159519d99042
--- /dev/null
+++ b/include/asm-m32r/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_M32R_SOCKET_H
+#define _ASM_M32R_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_M32R_SOCKET_H */
diff --git a/include/asm-m32r/sockios.h b/include/asm-m32r/sockios.h
new file mode 100644
index 000000000000..147a118442ac
--- /dev/null
+++ b/include/asm-m32r/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_M32R_SOCKIOS_H
+#define _ASM_M32R_SOCKIOS_H
+
+/* $Id$ */
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif  /* _ASM_M32R_SOCKIOS_H */
diff --git a/include/asm-m32r/spinlock.h b/include/asm-m32r/spinlock.h
new file mode 100644
index 000000000000..6608d8371c50
--- /dev/null
+++ b/include/asm-m32r/spinlock.h
@@ -0,0 +1,380 @@
+#ifndef _ASM_M32R_SPINLOCK_H
+#define _ASM_M32R_SPINLOCK_H
+
+/*
+ *  linux/include/asm-m32r/spinlock.h
+ *
+ *  M32R version:
+ *    Copyright (C) 2001, 2002  Hitoshi Yamamoto
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>	/* CONFIG_DEBUG_SPINLOCK, CONFIG_SMP */
+#include <linux/compiler.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+
+extern int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+#define RW_LOCK_BIAS		 0x01000000
+#define RW_LOCK_BIAS_STR	"0x01000000"
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+	volatile int slock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPINLOCK_MAGIC	0xdead4ead
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPINLOCK_MAGIC_INIT	, SPINLOCK_MAGIC
+#else
+#define SPINLOCK_MAGIC_INIT	/* */
+#endif
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define spin_is_locked(x)	(*(volatile int *)(&(x)->slock) <= 0)
+#define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+/**
+ * _raw_spin_trylock - Try spin lock and return a result
+ * @lock: Pointer to the lock variable
+ *
+ * _raw_spin_trylock() tries to get the lock and returns a result.
+ * On the m32r, the result value is 1 (= Success) or 0 (= Failure).
+ */
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	int oldval;
+	unsigned long tmp1, tmp2;
+
+	/*
+	 * lock->slock :  =1 : unlock
+	 *             : <=0 : lock
+	 * {
+	 *   oldval = lock->slock; <--+ need atomic operation
+	 *   lock->slock = 0;      <--+
+	 * }
+	 */
+	__asm__ __volatile__ (
+		"# spin_trylock			\n\t"
+		"ldi	%1, #0;			\n\t"
+		"mvfc	%2, psw;		\n\t"
+		"clrpsw	#0x40 -> nop;		\n\t"
+		DCACHE_CLEAR("%0", "r6", "%3")
+		"lock	%0, @%3;		\n\t"
+		"unlock	%1, @%3;		\n\t"
+		"mvtc	%2, psw;		\n\t"
+		: "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
+		: "r" (&lock->slock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+
+	return (oldval > 0);
+}
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	unsigned long tmp0, tmp1;
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
+		printk("pc: %p\n", __builtin_return_address(0));
+		BUG();
+	}
+#endif
+	/*
+	 * lock->slock :  =1 : unlock
+	 *             : <=0 : lock
+	 *
+	 * for ( ; ; ) {
+	 *   lock->slock -= 1;  <-- need atomic operation
+	 *   if (lock->slock == 0) break;
+	 *   for ( ; lock->slock <= 0 ; );
+	 * }
+	 */
+	__asm__ __volatile__ (
+		"# spin_lock			\n\t"
+		".fillinsn			\n"
+		"1:				\n\t"
+		"mvfc	%1, psw;		\n\t"
+		"clrpsw	#0x40 -> nop;		\n\t"
+		DCACHE_CLEAR("%0", "r6", "%2")
+		"lock	%0, @%2;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		"unlock	%0, @%2;		\n\t"
+		"mvtc	%1, psw;		\n\t"
+		"bltz	%0, 2f;			\n\t"
+		LOCK_SECTION_START(".balign 4 \n\t")
+		".fillinsn			\n"
+		"2:				\n\t"
+		"ld	%0, @%2;		\n\t"
+		"bgtz	%0, 1b;			\n\t"
+		"bra	2b;			\n\t"
+		LOCK_SECTION_END
+		: "=&r" (tmp0), "=&r" (tmp1)
+		: "r" (&lock->slock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(lock->magic != SPINLOCK_MAGIC);
+	BUG_ON(!spin_is_locked(lock));
+#endif
+	mb();
+	lock->slock = 1;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	volatile int lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RWLOCK_MAGIC	0xdeaf1eed
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define RWLOCK_MAGIC_INIT	, RWLOCK_MAGIC
+#else
+#define RWLOCK_MAGIC_INIT	/* */
+#endif
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
+
+#define rwlock_init(x)	do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+/*
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores.  See
+ * semaphore.h for details.  -ben
+ */
+/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
+
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+	unsigned long tmp0, tmp1;
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	/*
+	 * rw->lock :  >0 : unlock
+	 *          : <=0 : lock
+	 *
+	 * for ( ; ; ) {
+	 *   rw->lock -= 1;  <-- need atomic operation
+	 *   if (rw->lock >= 0) break;
+	 *   rw->lock += 1;  <-- need atomic operation
+	 *   for ( ; rw->lock <= 0 ; );
+	 * }
+	 */
+	__asm__ __volatile__ (
+		"# read_lock			\n\t"
+		".fillinsn			\n"
+		"1:				\n\t"
+		"mvfc	%1, psw;		\n\t"
+		"clrpsw	#0x40 -> nop;		\n\t"
+		DCACHE_CLEAR("%0", "r6", "%2")
+		"lock	%0, @%2;		\n\t"
+		"addi	%0, #-1;		\n\t"
+		"unlock	%0, @%2;		\n\t"
+		"mvtc	%1, psw;		\n\t"
+		"bltz	%0, 2f;			\n\t"
+		LOCK_SECTION_START(".balign 4 \n\t")
+		".fillinsn			\n"
+		"2:				\n\t"
+		"clrpsw	#0x40 -> nop;		\n\t"
+		DCACHE_CLEAR("%0", "r6", "%2")
+		"lock	%0, @%2;		\n\t"
+		"addi	%0, #1;			\n\t"
+		"unlock	%0, @%2;		\n\t"
+		"mvtc	%1, psw;		\n\t"
+		".fillinsn			\n"
+		"3:				\n\t"
+		"ld	%0, @%2;		\n\t"
+		"bgtz	%0, 1b;			\n\t"
+		"bra	3b;			\n\t"
+		LOCK_SECTION_END
+		: "=&r" (tmp0), "=&r" (tmp1)
+		: "r" (&rw->lock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+}
+
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+	unsigned long tmp0, tmp1, tmp2;
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	/*
+	 * rw->lock :  =RW_LOCK_BIAS_STR : unlock
+	 *          : !=RW_LOCK_BIAS_STR : lock
+	 *
+	 * for ( ; ; ) {
+	 *   rw->lock -= RW_LOCK_BIAS_STR;  <-- need atomic operation
+	 *   if (rw->lock == 0) break;
+	 *   rw->lock += RW_LOCK_BIAS_STR;  <-- need atomic operation
+	 *   for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ;
+	 * }
+	 */
+	__asm__ __volatile__ (
+		"# write_lock					\n\t"
+		"seth	%1, #high(" RW_LOCK_BIAS_STR ");	\n\t"
+		"or3	%1, %1, #low(" RW_LOCK_BIAS_STR ");	\n\t"
+		".fillinsn					\n"
+		"1:						\n\t"
+		"mvfc	%2, psw;				\n\t"
+		"clrpsw	#0x40 -> nop;				\n\t"
+		DCACHE_CLEAR("%0", "r7", "%3")
+		"lock	%0, @%3;				\n\t"
+		"sub	%0, %1;					\n\t"
+		"unlock	%0, @%3;				\n\t"
+		"mvtc	%2, psw;				\n\t"
+		"bnez	%0, 2f;					\n\t"
+		LOCK_SECTION_START(".balign 4 \n\t")
+		".fillinsn					\n"
+		"2:						\n\t"
+		"clrpsw	#0x40 -> nop;				\n\t"
+		DCACHE_CLEAR("%0", "r7", "%3")
+		"lock	%0, @%3;				\n\t"
+		"add	%0, %1;					\n\t"
+		"unlock	%0, @%3;				\n\t"
+		"mvtc	%2, psw;				\n\t"
+		".fillinsn					\n"
+		"3:						\n\t"
+		"ld	%0, @%3;				\n\t"
+		"beq	%0, %1, 1b;				\n\t"
+		"bra	3b;					\n\t"
+		LOCK_SECTION_END
+		: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
+		: "r" (&rw->lock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r7"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+}
+
+static inline void _raw_read_unlock(rwlock_t *rw)
+{
+	unsigned long tmp0, tmp1;
+
+	__asm__ __volatile__ (
+		"# read_unlock			\n\t"
+		"mvfc	%1, psw;		\n\t"
+		"clrpsw	#0x40 -> nop;		\n\t"
+		DCACHE_CLEAR("%0", "r6", "%2")
+		"lock	%0, @%2;		\n\t"
+		"addi	%0, #1;			\n\t"
+		"unlock	%0, @%2;		\n\t"
+		"mvtc	%1, psw;		\n\t"
+		: "=&r" (tmp0), "=&r" (tmp1)
+		: "r" (&rw->lock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r6"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+}
+
+static inline void _raw_write_unlock(rwlock_t *rw)
+{
+	unsigned long tmp0, tmp1, tmp2;
+
+	__asm__ __volatile__ (
+		"# write_unlock					\n\t"
+		"seth	%1, #high(" RW_LOCK_BIAS_STR ");	\n\t"
+		"or3	%1, %1, #low(" RW_LOCK_BIAS_STR ");	\n\t"
+		"mvfc	%2, psw;				\n\t"
+		"clrpsw	#0x40 -> nop;				\n\t"
+		DCACHE_CLEAR("%0", "r7", "%3")
+		"lock	%0, @%3;				\n\t"
+		"add	%0, %1;					\n\t"
+		"unlock	%0, @%3;				\n\t"
+		"mvtc	%2, psw;				\n\t"
+		: "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
+		: "r" (&rw->lock)
+		: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		, "r7"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+	);
+}
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+static inline int _raw_write_trylock(rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+#endif	/* _ASM_M32R_SPINLOCK_H */
diff --git a/include/asm-m32r/stat.h b/include/asm-m32r/stat.h
new file mode 100644
index 000000000000..05748fef4c8e
--- /dev/null
+++ b/include/asm-m32r/stat.h
@@ -0,0 +1,91 @@
+#ifndef _ASM_M32R_STAT_H
+#define _ASM_M32R_STAT_H
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+#include <asm/byteorder.h>
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC	1
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+#define STAT64_HAS_BROKEN_ST_INO
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+#if defined(__BIG_ENDIAN)
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+#elif defined(__LITTLE_ENDIAN)
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+#else
+#error no endian defined
+#endif
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif  /* _ASM_M32R_STAT_H */
diff --git a/include/asm-m32r/statfs.h b/include/asm-m32r/statfs.h
new file mode 100644
index 000000000000..6eb4c6007e6b
--- /dev/null
+++ b/include/asm-m32r/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M32R_STATFS_H
+#define _ASM_M32R_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif  /* _ASM_M32R_STATFS_H */
diff --git a/include/asm-m32r/string.h b/include/asm-m32r/string.h
new file mode 100644
index 000000000000..cb54bcc2e677
--- /dev/null
+++ b/include/asm-m32r/string.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_M32R_STRING_H
+#define _ASM_M32R_STRING_H
+
+/* $Id$ */
+
+#define  __HAVE_ARCH_STRLEN
+extern size_t strlen(const char * s);
+
+#define  __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define  __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#endif  /* _ASM_M32R_STRING_H */
diff --git a/include/asm-m32r/syscall.h b/include/asm-m32r/syscall.h
new file mode 100644
index 000000000000..d8d4b2c7a7d4
--- /dev/null
+++ b/include/asm-m32r/syscall.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_M32R_SYSCALL_H
+#define _ASM_M32R_SYSCALL_H
+
+/* $Id$ */
+
+/* Definitions for the system call vector.  */
+#define SYSCALL_VECTOR          "2"
+#define SYSCALL_VECTOR_ADDRESS  "0xa0"
+
+#endif /* _ASM_M32R_SYSCALL_H */
+
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
new file mode 100644
index 000000000000..73348c3f858b
--- /dev/null
+++ b/include/asm-m32r/system.h
@@ -0,0 +1,299 @@
+#ifndef _ASM_M32R_SYSTEM_H
+#define _ASM_M32R_SYSTEM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001  by Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ *
+ * `next' and `prev' should be struct task_struct, but it isn't always defined
+ */
+
+#ifndef CONFIG_SMP
+#define prepare_to_switch()  do { } while(0)
+#endif	/* not CONFIG_SMP */
+
+#define switch_to(prev, next, last)  do { \
+	register unsigned long  arg0 __asm__ ("r0") = (unsigned long)prev; \
+	register unsigned long  arg1 __asm__ ("r1") = (unsigned long)next; \
+	register unsigned long  *oldsp __asm__ ("r2") = &(prev->thread.sp); \
+	register unsigned long  *newsp __asm__ ("r3") = &(next->thread.sp); \
+	register unsigned long  *oldlr __asm__ ("r4") = &(prev->thread.lr); \
+	register unsigned long  *newlr __asm__ ("r5") = &(next->thread.lr); \
+	register struct task_struct  *__last __asm__ ("r6"); \
+	__asm__ __volatile__ ( \
+		"st     r8, @-r15                                 \n\t" \
+		"st     r9, @-r15                                 \n\t" \
+		"st    r10, @-r15                                 \n\t" \
+		"st    r11, @-r15                                 \n\t" \
+		"st    r12, @-r15                                 \n\t" \
+		"st    r13, @-r15                                 \n\t" \
+		"st    r14, @-r15                                 \n\t" \
+		"seth  r14, #high(1f)                             \n\t" \
+		"or3   r14, r14, #low(1f)                         \n\t" \
+		"st    r14, @r4    ; store old LR                 \n\t" \
+		"st    r15, @r2    ; store old SP                 \n\t" \
+		"ld    r15, @r3    ; load new SP                  \n\t" \
+		"st     r0, @-r15  ; store 'prev' onto new stack  \n\t" \
+		"ld    r14, @r5    ; load new LR                  \n\t" \
+		"jmp   r14                                        \n\t" \
+		".fillinsn                                        \n  " \
+		"1:                                               \n\t" \
+		"ld     r6, @r15+  ; load 'prev' from new stack   \n\t" \
+		"ld    r14, @r15+                                 \n\t" \
+		"ld    r13, @r15+                                 \n\t" \
+		"ld    r12, @r15+                                 \n\t" \
+		"ld    r11, @r15+                                 \n\t" \
+		"ld    r10, @r15+                                 \n\t" \
+		"ld     r9, @r15+                                 \n\t" \
+		"ld     r8, @r15+                                 \n\t" \
+		: "=&r" (__last) \
+		: "r" (arg0), "r" (arg1), "r" (oldsp), "r" (newsp), \
+		  "r" (oldlr), "r" (newlr) \
+		: "memory" \
+	); \
+	last = __last; \
+} while(0)
+
+/* Interrupt Control */
+#if !defined(CONFIG_CHIP_M32102)
+#define local_irq_enable() \
+	__asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory")
+#define local_irq_disable() \
+	__asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory")
+#else	/* CONFIG_CHIP_M32102 */
+static inline void local_irq_enable(void)
+{
+	unsigned long tmpreg;
+	__asm__ __volatile__(
+		"mvfc	%0, psw;		\n\t"
+		"or3	%0, %0, #0x0040;	\n\t"
+		"mvtc	%0, psw;		\n\t"
+	: "=&r" (tmpreg) : : "cbit", "memory");
+}
+
+static inline void local_irq_disable(void)
+{
+	unsigned long tmpreg0, tmpreg1;
+	__asm__ __volatile__(
+		"ld24	%0, #0	; Use 32-bit insn. \n\t"
+		"mvfc	%1, psw	; No interrupt can be accepted here. \n\t"
+		"mvtc	%0, psw	\n\t"
+		"and3	%0, %1, #0xffbf	\n\t"
+		"mvtc	%0, psw	\n\t"
+	: "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory");
+}
+#endif	/* CONFIG_CHIP_M32102 */
+
+#define local_save_flags(x) \
+	__asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */)
+
+#define local_irq_restore(x) \
+	__asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \
+		: "r" (x) : "cbit", "memory")
+
+#if !defined(CONFIG_CHIP_M32102)
+#define local_irq_save(x)				\
+	__asm__ __volatile__(				\
+  		"mvfc	%0, psw;		\n\t"	\
+	  	"clrpsw	#0x40 -> nop;		\n\t"	\
+  		: "=r" (x) : /* no input */ : "memory")
+#else	/* CONFIG_CHIP_M32102 */
+#define local_irq_save(x) 				\
+	({						\
+		unsigned long tmpreg;			\
+		__asm__ __volatile__( 			\
+			"ld24	%1, #0 \n\t" 		\
+			"mvfc	%0, psw \n\t"		\
+			"mvtc	%1, psw \n\t"		\
+			"and3	%1, %0, #0xffbf \n\t"	\
+			"mvtc	%1, psw \n\t" 		\
+			: "=r" (x), "=&r" (tmpreg)	\
+			: : "cbit", "memory");		\
+	})
+#endif	/* CONFIG_CHIP_M32102 */
+
+#define irqs_disabled()					\
+	({						\
+		unsigned long flags;			\
+		local_save_flags(flags);		\
+		!(flags & 0x40);			\
+	})
+
+#endif  /* __KERNEL__ */
+
+#define nop()	__asm__ __volatile__ ("nop" : : )
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr)	(xchg((ptr),1))
+
+#ifdef CONFIG_SMP
+extern void  __xchg_called_with_bad_pointer(void);
+#endif
+
+#ifdef CONFIG_CHIP_M32700_TS1
+#define DCACHE_CLEAR(reg0, reg1, addr)				\
+	"seth	"reg1", #high(dcache_dummy);		\n\t"	\
+	"or3	"reg1", "reg1", #low(dcache_dummy);	\n\t"	\
+	"lock	"reg0", @"reg1";			\n\t"	\
+	"add3	"reg0", "addr", #0x1000;		\n\t"	\
+	"ld	"reg0", @"reg0";			\n\t"	\
+	"add3	"reg0", "addr", #0x2000;		\n\t"	\
+	"ld	"reg0", @"reg0";			\n\t"	\
+	"unlock	"reg0", @"reg1";			\n\t"
+	/* FIXME: This workaround code cannot handle kenrel modules
+	 * correctly under SMP environment.
+	 */
+#else	/* CONFIG_CHIP_M32700_TS1 */
+#define DCACHE_CLEAR(reg0, reg1, addr)
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+
+static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr,
+	int size)
+{
+	unsigned long flags;
+	unsigned long tmp = 0;
+
+	local_irq_save(flags);
+
+	switch (size) {
+#ifndef CONFIG_SMP
+	case 1:
+		__asm__ __volatile__ (
+			"ldb	%0, @%2 \n\t"
+			"stb	%1, @%2 \n\t"
+			: "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+		break;
+	case 2:
+		__asm__ __volatile__ (
+			"ldh	%0, @%2 \n\t"
+			"sth	%1, @%2 \n\t"
+			: "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+		break;
+	case 4:
+		__asm__ __volatile__ (
+			"ld	%0, @%2 \n\t"
+			"st	%1, @%2 \n\t"
+			: "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+		break;
+#else  /* CONFIG_SMP */
+	case 4:
+		__asm__ __volatile__ (
+			DCACHE_CLEAR("%0", "r4", "%2")
+			"lock	%0, @%2;	\n\t"
+			"unlock	%1, @%2;	\n\t"
+			: "=&r" (tmp) : "r" (x), "r" (ptr)
+			: "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+			, "r4"
+#endif	/* CONFIG_CHIP_M32700_TS1 */
+		);
+		break;
+	default:
+		__xchg_called_with_bad_pointer();
+#endif  /* CONFIG_SMP */
+	}
+
+	local_irq_restore(flags);
+
+	return (tmp);
+}
+
+/*
+ * Memory barrier.
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ */
+#define mb()   barrier()
+#define rmb()  mb()
+#define wmb()  mb()
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *      CPU 0                           CPU 1
+ *
+ *      b = 2;
+ *      memory_barrier();
+ *      p = &b;                         q = p;
+ *                                      read_barrier_depends();
+ *                                      d = *q;
+ * </programlisting>
+ *
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *      CPU 0                           CPU 1
+ *
+ *      a = 2;
+ *      memory_barrier();
+ *      b = 3;                          y = b;
+ *                                      read_barrier_depends();
+ *                                      x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like thiswhere there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#endif
+
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define arch_align_stack(x) (x)
+
+#endif  /* _ASM_M32R_SYSTEM_H */
diff --git a/include/asm-m32r/termbits.h b/include/asm-m32r/termbits.h
new file mode 100644
index 000000000000..5ace3702df75
--- /dev/null
+++ b/include/asm-m32r/termbits.h
@@ -0,0 +1,176 @@
+#ifndef _ASM_M32R_TERMBITS_H
+#define _ASM_M32R_TERMBITS_H
+
+/* $Id$ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8   0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CTVB	  004000000000		/* VisioBraille Terminal flow control */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif  /* _ASM_M32R_TERMBITS_H */
diff --git a/include/asm-m32r/termios.h b/include/asm-m32r/termios.h
new file mode 100644
index 000000000000..fc99d2e178d8
--- /dev/null
+++ b/include/asm-m32r/termios.h
@@ -0,0 +1,109 @@
+#ifndef _M32R_TERMIOS_H
+#define _M32R_TERMIOS_H
+
+/* orig : i386 2.6.0-test5 */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _M32R_TERMIOS_H */
diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h
new file mode 100644
index 000000000000..9f3a0fcf6e2b
--- /dev/null
+++ b/include/asm-m32r/thread_info.h
@@ -0,0 +1,182 @@
+#ifndef _ASM_M32R_THREAD_INFO_H
+#define _ASM_M32R_THREAD_INFO_H
+
+/* thread_info.h: m32r low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user-thread
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block    restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		0x00000000
+#define TI_EXEC_DOMAIN	0x00000004
+#define TI_FLAGS	0x00000008
+#define TI_STATUS	0x0000000C
+#define TI_CPU		0x00000010
+#define TI_PRE_COUNT	0x00000014
+#define TI_ADDR_LIMIT	0x00000018
+#define TI_RESTART_BLOCK 0x000001C
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+
+	__asm__ __volatile__ (
+		"ldi	%0, #%1			\n\t"
+		"and	%0, sp			\n\t"
+		: "=r" (ti) : "i" (~(THREAD_SIZE - 1))
+	);
+
+	return ti;
+}
+
+/* thread information allocation */
+#if CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+	({							\
+		struct thread_info *ret;			\
+	 							\
+	 	ret = kmalloc(THREAD_SIZE, GFP_KERNEL);		\
+	 	if (ret)					\
+	 		memset(ret, 0, THREAD_SIZE);		\
+	 	ret;						\
+	 })
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#define TI_FLAG_FAULT_CODE_SHIFT	28
+
+static inline void set_thread_fault_code(unsigned int val)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
+		| (val << TI_FLAG_FAULT_CODE_SHIFT);
+}
+
+static inline unsigned int get_thread_fault_code(void)
+{
+	struct thread_info *ti = current_thread_info();
+	return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
+}
+
+#else /* !__ASSEMBLY__ */
+
+#define THREAD_SIZE	8192
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
+	.macro GET_THREAD_INFO reg
+	ldi	\reg, #-THREAD_SIZE
+	and	\reg, sp
+	.endm
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_IRET		5	/* return with iret */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+					/* 31..28 fault code */
+#define TIF_MEMDIE		17
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_THREAD_INFO_H */
diff --git a/include/asm-m32r/timex.h b/include/asm-m32r/timex.h
new file mode 100644
index 000000000000..abf12e7ffbf3
--- /dev/null
+++ b/include/asm-m32r/timex.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_M32R_TIMEX_H
+#define _ASM_M32R_TIMEX_H
+
+/* $Id$ */
+
+/*
+ * linux/include/asm-m32r/timex.h
+ *
+ * m32r architecture timex specifications
+ */
+
+#include <linux/config.h>
+
+#define CLOCK_TICK_RATE	(CONFIG_BUS_CLOCK / CONFIG_TIMER_DIVIDE)
+#define CLOCK_TICK_FACTOR	20	/* Factor of both 1000000 and CLOCK_TICK_RATE */
+#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
+	(1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR)) \
+		<< (SHIFT_SCALE-SHIFT_HZ)) / HZ)
+
+#ifdef __KERNEL__
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP.
+ */
+
+typedef unsigned long long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+	return 0;
+}
+#endif  /* __KERNEL__ */
+
+#endif  /* _ASM_M32R_TIMEX_H */
diff --git a/include/asm-m32r/tlb.h b/include/asm-m32r/tlb.h
new file mode 100644
index 000000000000..c7ebd8d48f3b
--- /dev/null
+++ b/include/asm-m32r/tlb.h
@@ -0,0 +1,20 @@
+#ifndef _M32R_TLB_H
+#define _M32R_TLB_H
+
+/*
+ * x86 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _M32R_TLB_H */
diff --git a/include/asm-m32r/tlbflush.h b/include/asm-m32r/tlbflush.h
new file mode 100644
index 000000000000..bc7c407dbd92
--- /dev/null
+++ b/include/asm-m32r/tlbflush.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_M32R_TLBFLUSH_H
+#define _ASM_M32R_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <asm/m32r.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *);
+extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long,
+	unsigned long);
+
+#ifndef CONFIG_SMP
+#ifdef CONFIG_MMU
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_range(vma, start, end)	\
+	local_flush_tlb_range(vma, start, end)
+#define flush_tlb_kernel_range(start, end)	local_flush_tlb_all()
+#else	/* CONFIG_MMU */
+#define flush_tlb_all()			do { } while (0)
+#define flush_tlb_mm(mm)		do { } while (0)
+#define flush_tlb_page(vma, vmaddr)	do { } while (0)
+#define flush_tlb_range(vma, start, end)	do { } while (0)
+#endif	/* CONFIG_MMU */
+#else	/* CONFIG_SMP */
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *);
+extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long,
+	unsigned long);
+
+#define flush_tlb_all()			smp_flush_tlb_all()
+#define flush_tlb_mm(mm)		smp_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page)	smp_flush_tlb_page(vma, page)
+#define flush_tlb_range(vma, start, end)	\
+	smp_flush_tlb_range(vma, start, end)
+#define flush_tlb_kernel_range(start, end)	smp_flush_tlb_all()
+#endif	/* CONFIG_SMP */
+
+static __inline__ void __flush_tlb_page(unsigned long page)
+{
+	unsigned int tmpreg0, tmpreg1, tmpreg2;
+
+	__asm__ __volatile__ (
+		"seth	%0, #high(%4)	\n\t"
+		"st	%3, @(%5, %0)	\n\t"
+		"ldi	%1, #1		\n\t"
+		"st	%1, @(%6, %0)	\n\t"
+		"add3	%1, %0, %7	\n\t"
+		".fillinsn		\n"
+		"1:			\n\t"
+		"ld	%2, @(%6, %0)	\n\t"
+		"bnez	%2, 1b		\n\t"
+		"ld	%0, @%1+	\n\t"
+		"ld	%1, @%1		\n\t"
+		"st	%2, @+%0	\n\t"
+		"st	%2, @+%1	\n\t"
+		: "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2)
+		: "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset),
+		"i" (MTOP_offset), "i" (MIDXI_offset)
+		: "memory"
+	);
+}
+
+static __inline__ void __flush_tlb_all(void)
+{
+	unsigned int tmpreg0, tmpreg1;
+
+	__asm__ __volatile__ (
+		"seth	%0, #high(%2)		\n\t"
+		"or3	%0, %0, #low(%2)	\n\t"
+		"ldi	%1, #0xc		\n\t"
+		"st	%1, @%0			\n\t"
+		".fillinsn			\n"
+		"1:				\n\t"
+		"ld	%1, @%0			\n\t"
+		"bnez	%1, 1b			\n\t"
+		: "=&r" (tmpreg0), "=&r" (tmpreg1)
+		: "i" (MTOP) : "memory"
+	);
+}
+
+#define flush_tlb_pgtables(mm, start, end)	do { } while (0)
+
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif	/* _ASM_M32R_TLBFLUSH_H */
+
diff --git a/include/asm-m32r/topology.h b/include/asm-m32r/topology.h
new file mode 100644
index 000000000000..299a89d91bde
--- /dev/null
+++ b/include/asm-m32r/topology.h
@@ -0,0 +1,48 @@
+/*
+ * linux/include/asm-generic/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_M32R_TOPOLOGY_H
+#define _ASM_M32R_TOPOLOGY_H
+
+/* Other architectures wishing to use this simple topology API should fill
+   in the below functions as appropriate in their own <asm/topology.h> file. */
+
+#define cpu_to_node(cpu)	(0)
+
+#ifndef parent_node
+#define parent_node(node)	(0)
+#endif
+#ifndef node_to_cpumask
+#define node_to_cpumask(node)	(cpu_online_map)
+#endif
+#ifndef node_to_first_cpu
+#define node_to_first_cpu(node)	(0)
+#endif
+#ifndef pcibus_to_cpumask
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+#endif
+
+#endif /* _ASM_M32R_TOPOLOGY_H */
diff --git a/include/asm-m32r/types.h b/include/asm-m32r/types.h
new file mode 100644
index 000000000000..ca0a887d2237
--- /dev/null
+++ b/include/asm-m32r/types.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_M32R_TYPES_H
+#define _ASM_M32R_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+/* $Id$ */
+
+/* orig : i386 2.4.18 */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* DMA addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif  /* _ASM_M32R_TYPES_H */
diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
new file mode 100644
index 000000000000..bbb8ac4018a0
--- /dev/null
+++ b/include/asm-m32r/uaccess.h
@@ -0,0 +1,753 @@
+#ifndef _ASM_M32R_UACCESS_H
+#define _ASM_M32R_UACCESS_H
+
+/*
+ *  linux/include/asm-m32r/uaccess.h
+ *
+ *  M32R version.
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#undef UACCESS_DEBUG
+
+#ifdef UACCESS_DEBUG
+#define UAPRINTK(args...) printk(args)
+#else
+#define UAPRINTK(args...)
+#endif /* UACCESS_DEBUG */
+
+/*
+ * User space memory access functions
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifdef CONFIG_MMU
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(0xFFFFFFFF)
+#endif /* CONFIG_MMU */
+
+#define get_ds()	(KERNEL_DS)
+#ifdef CONFIG_MMU
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+#else
+static inline mm_segment_t get_fs(void)
+{
+  return USER_DS;
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+}
+#endif /* CONFIG_MMU */
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
+ *
+ * This needs 33-bit arithmetic. We have a carry...
+ */
+#define __range_ok(addr,size) ({					\
+	unsigned long flag, sum; 					\
+	__chk_user_ptr(addr);						\
+	asm ( 								\
+		"	cmpu	%1, %1    ; clear cbit\n"		\
+		"	addx	%1, %3    ; set cbit if overflow\n"	\
+		"	subx	%0, %0\n"				\
+		"	cmpu	%4, %1\n"				\
+		"	subx	%0, %5\n"				\
+		: "=&r"(flag), "=r"(sum)				\
+		: "1"(addr), "r"((int)(size)), 				\
+		  "r"(current_thread_info()->addr_limit.seg), "r"(0)	\
+		: "cbit" );						\
+	flag; })
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#ifdef CONFIG_MMU
+#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
+#else
+static inline int access_ok(int type, const void *addr, unsigned long size)
+{
+  extern unsigned long memory_start, memory_end;
+  unsigned long val = (unsigned long)addr;
+
+  return ((val >= memory_start) && ((val + size) < memory_end));
+}
+#endif /* CONFIG_MMU */
+
+/**
+ * verify_area: - Obsolete/deprecated and will go away soon,
+ * use access_ok() instead.
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This function has been replaced by access_ok().
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns zero if the memory block may be valid, -EFAULT
+ * if it is definitely invalid.
+ *
+ * See access_ok() for more details.
+ */
+static inline int __deprecated verify_area(int type, const void __user *addr,
+			      unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern void __get_user_1(void);
+extern void __get_user_2(void);
+extern void __get_user_4(void);
+
+#ifndef MODULE
+#define __get_user_x(size,ret,x,ptr) 					\
+	__asm__ __volatile__(						\
+		"	mv	r0, %0\n"				\
+		"	mv	r1, %1\n" 				\
+		"	bl __get_user_" #size "\n"			\
+		"	mv	%0, r0\n"				\
+		"	mv	%1, r1\n" 				\
+		: "=r"(ret), "=r"(x) 					\
+		: "0"(ptr)						\
+		: "r0", "r1", "r14" )
+#else /* MODULE */
+/*
+ * Use "jl" instead of "bl" for MODULE
+ */
+#define __get_user_x(size,ret,x,ptr) 					\
+	__asm__ __volatile__(						\
+		"	mv	r0, %0\n"				\
+		"	mv	r1, %1\n" 				\
+		"	seth	lr, #high(__get_user_" #size ")\n"	\
+		"	or3	lr, lr, #low(__get_user_" #size ")\n"	\
+		"	jl 	lr\n"					\
+		"	mv	%0, r0\n"				\
+		"	mv	%1, r1\n" 				\
+		: "=r"(ret), "=r"(x) 					\
+		: "0"(ptr)						\
+		: "r0", "r1", "r14" )
+#endif
+
+/* Careful: we have to cast the result to the type of the pointer for sign
+   reasons */
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr)							\
+({	int __ret_gu,__val_gu;						\
+	__chk_user_ptr(ptr);						\
+	switch(sizeof (*(ptr))) {					\
+	case 1:  __get_user_x(1,__ret_gu,__val_gu,ptr); break;		\
+	case 2:  __get_user_x(2,__ret_gu,__val_gu,ptr); break;		\
+	case 4:  __get_user_x(4,__ret_gu,__val_gu,ptr); break;		\
+	default: __get_user_x(X,__ret_gu,__val_gu,ptr); break;		\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+extern void __put_user_bad(void);
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)							\
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __put_user_nocheck(x,ptr,size)					\
+({									\
+	long __pu_err;							\
+	__put_user_size((x),(ptr),(size),__pu_err);			\
+	__pu_err;							\
+})
+
+
+#define __put_user_check(x,ptr,size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))			\
+		__put_user_size((x),__pu_addr,(size),__pu_err);		\
+	__pu_err;							\
+})
+
+#if defined(__LITTLE_ENDIAN__)
+#define __put_user_u64(x, addr, err)                                    \
+        __asm__ __volatile__(                                           \
+                "       .fillinsn\n"                                    \
+                "1:     st %L1,@%2\n"                                    \
+                "       .fillinsn\n"                                    \
+                "2:     st %H1,@(4,%2)\n"                                \
+                "       .fillinsn\n"                                    \
+                "3:\n"                                                  \
+                ".section .fixup,\"ax\"\n"                              \
+                "       .balign 4\n"                                    \
+                "4:     ldi %0,%3\n"                                    \
+                "       seth r14,#high(3b)\n"                           \
+                "       or3 r14,r14,#low(3b)\n"                         \
+                "       jmp r14\n"                                      \
+                ".previous\n"                                           \
+                ".section __ex_table,\"a\"\n"                           \
+                "       .balign 4\n"                                    \
+                "       .long 1b,4b\n"                                  \
+                "       .long 2b,4b\n"                                  \
+                ".previous"                                             \
+                : "=r"(err)                                             \
+                : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+                : "r14", "memory")
+
+#elif defined(__BIG_ENDIAN__)
+#define __put_user_u64(x, addr, err)					\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	st %H1,@%2\n"					\
+		"	.fillinsn\n"					\
+		"2:	st %L1,@(4,%2)\n"				\
+		"	.fillinsn\n"					\
+		"3:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"4:	ldi %0,%3\n"					\
+		"	seth r14,#high(3b)\n"				\
+		"	or3 r14,r14,#low(3b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,4b\n"					\
+		"	.long 2b,4b\n"					\
+		".previous"						\
+		: "=r"(err)						\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+		: "r14", "memory")
+#else
+#error no endian defined
+#endif
+
+#define __put_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __put_user_asm(x,ptr,retval,"b"); break;		\
+	  case 2: __put_user_asm(x,ptr,retval,"h"); break;		\
+	  case 4: __put_user_asm(x,ptr,retval,""); break;		\
+	  case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
+	  default: __put_user_bad();					\
+	}								\
+} while (0)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype)				\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	st"itype" %1,@%2\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	ldi %0,%3\n"					\
+		"	seth r14,#high(2b)\n"				\
+		"	or3 r14,r14,#low(2b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err)						\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+		: "r14", "memory")
+
+#define __get_user_nocheck(x,ptr,size)					\
+({									\
+	long __gu_err, __gu_val;					\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err);		\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __get_user_asm(x,ptr,retval,"ub"); break;		\
+	  case 2: __get_user_asm(x,ptr,retval,"uh"); break;		\
+	  case 4: __get_user_asm(x,ptr,retval,""); break;		\
+	  default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype)				\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	ld"itype" %1,@%2\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	ldi %0,%3\n"					\
+		"	seth r14,#high(2b)\n"				\
+		"	or3 r14,r14,#low(2b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err), "=&r"(x)					\
+		: "r"(addr), "i"(-EFAULT), "0"(err)			\
+		: "r14", "memory")
+
+/*
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the m32r will not write
+ * anything, so this is accurate.
+ */
+
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied.  */
+#define __copy_user(to,from,size)					\
+do {									\
+	unsigned long __dst, __src, __c;				\
+	__asm__ __volatile__ (						\
+		"	mv	r14, %0\n"				\
+		"	or	r14, %1\n"				\
+		"	beq	%0, %1, 9f\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	and3	r14, r14, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%2, %2, #3\n"				\
+		"	beqz	%3, 2f\n"				\
+		"	addi	%0, #-4		; word_copy \n"		\
+		"	.fillinsn\n"					\
+		"0:	ld	r14, @%1+\n"				\
+		"	addi	%3, #-1\n"				\
+		"	.fillinsn\n"					\
+		"1:	st	r14, @+%0\n"				\
+		"	bnez	%3, 0b\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"2:	ldb	r14, @%1	; byte_copy \n"		\
+		"	.fillinsn\n"					\
+		"3:	stb	r14, @%0\n"				\
+		"	addi	%1, #1\n"				\
+		"	addi	%2, #-1\n"				\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"5:	addi	%3, #1\n"				\
+		"	addi	%1, #-4\n"				\
+		"	.fillinsn\n"					\
+		"6:	slli	%3, #2\n"				\
+		"	add	%2, %3\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"7:	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,6b\n"					\
+		"	.long 1b,5b\n"					\
+		"	.long 2b,9b\n"					\
+		"	.long 3b,9b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c)	\
+		: "0"(to), "1"(from), "2"(size), "3"(size / 4)		\
+		: "r14", "memory");					\
+} while (0)
+
+#define __copy_user_zeroing(to,from,size)				\
+do {									\
+	unsigned long __dst, __src, __c;				\
+	__asm__ __volatile__ (						\
+		"	mv	r14, %0\n"				\
+		"	or	r14, %1\n"				\
+		"	beq	%0, %1, 9f\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	and3	r14, r14, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%2, %2, #3\n"				\
+		"	beqz	%3, 2f\n"				\
+		"	addi	%0, #-4		; word_copy \n"		\
+		"	.fillinsn\n"					\
+		"0:	ld	r14, @%1+\n"				\
+		"	addi	%3, #-1\n"				\
+		"	.fillinsn\n"					\
+		"1:	st	r14, @+%0\n"				\
+		"	bnez	%3, 0b\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"2:	ldb	r14, @%1	; byte_copy \n"		\
+		"	.fillinsn\n"					\
+		"3:	stb	r14, @%0\n"				\
+		"	addi	%1, #1\n"				\
+		"	addi	%2, #-1\n"				\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"5:	addi	%3, #1\n"				\
+		"	addi	%1, #-4\n"				\
+		"	.fillinsn\n"					\
+		"6:	slli	%3, #2\n"				\
+		"	add	%2, %3\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"7:	ldi	r14, #0		; store zero \n"	\
+		"	.fillinsn\n"					\
+		"8:	addi	%2, #-1\n"				\
+		"	stb	r14, @%0	; ACE? \n"		\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 8b\n"				\
+		"	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,6b\n"					\
+		"	.long 1b,5b\n"					\
+		"	.long 2b,7b\n"					\
+		"	.long 3b,7b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c)	\
+		: "0"(to), "1"(from), "2"(size), "3"(size / 4)		\
+		: "r14", "memory");					\
+} while (0)
+
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline unsigned long __generic_copy_from_user_nocheck(void *to,
+	const void __user *from, unsigned long n)
+{
+	__copy_user_zeroing(to,from,n);
+	return n;
+}
+
+static inline unsigned long __generic_copy_to_user_nocheck(void __user *to,
+	const void *from, unsigned long n)
+{
+	__copy_user(to,from,n);
+	return n;
+}
+
+unsigned long __generic_copy_to_user(void *, const void *, unsigned long);
+unsigned long __generic_copy_from_user(void *, const void *, unsigned long);
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to,from,n)			\
+	__generic_copy_to_user_nocheck((to),(from),(n))
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to,from,n)				\
+({							\
+	might_sleep();					\
+	__generic_copy_to_user((to),(from),(n));	\
+})
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking. * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to,from,n)			\
+	__generic_copy_from_user_nocheck((to),(from),(n))
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to,from,n)			\
+({							\
+	might_sleep();					\
+__generic_copy_from_user((to),(from),(n));	\
+})
+
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+				long count);
+long __must_check __strncpy_from_user(char *dst,
+				const char __user *src, long count);
+
+/**
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long __clear_user(void __user *mem, unsigned long len);
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long clear_user(void __user *mem, unsigned long len);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+long strnlen_user(const char __user *str, long n);
+
+#endif /* _ASM_M32R_UACCESS_H */
diff --git a/include/asm-m32r/ucontext.h b/include/asm-m32r/ucontext.h
new file mode 100644
index 000000000000..2de709a5c53c
--- /dev/null
+++ b/include/asm-m32r/ucontext.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_M32R_UCONTEXT_H
+#define _ASM_M32R_UCONTEXT_H
+
+/* orig : i386 2.4.18 */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_M32R_UCONTEXT_H */
diff --git a/include/asm-m32r/unaligned.h b/include/asm-m32r/unaligned.h
new file mode 100644
index 000000000000..3aef9ac8d3aa
--- /dev/null
+++ b/include/asm-m32r/unaligned.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_M32R_UNALIGNED_H
+#define _ASM_M32R_UNALIGNED_H
+
+/* $Id$ */
+
+/* orig : generic 2.4.18 */
+
+/*
+ * For the benefit of those who are trying to port Linux to another
+ * architecture, here are some C-language equivalents.
+ */
+
+#include <asm/string.h>
+
+
+#define get_unaligned(ptr) \
+  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
+
+#define put_unaligned(val, ptr)				\
+  ({ __typeof__(*(ptr)) __tmp = (val);			\
+     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
+     (void)0; })
+
+
+#endif  /* _ASM_M32R_UNALIGNED_H */
diff --git a/include/asm-m32r/unistd.h b/include/asm-m32r/unistd.h
new file mode 100644
index 000000000000..8552d8f45ab1
--- /dev/null
+++ b/include/asm-m32r/unistd.h
@@ -0,0 +1,474 @@
+#ifndef _ASM_M32R_UNISTD_H
+#define _ASM_M32R_UNISTD_H
+
+/* $Id$ */
+
+#include <asm/syscall.h>	/* SYSCALL_* */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+/* 16 is unused */
+/* 17 is unused */
+/* 18 is unused */
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+/* 23 is unused */
+/* 24 is unused */
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+/* 28 is unused */
+#define __NR_pause		 29
+#define __NR_utime		 30
+/* 31 is unused */
+#define __NR_cachectl		 32 /* old #define __NR_gtty		 32*/
+#define __NR_access		 33
+/* 34 is unused */
+/* 35 is unused */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+/* 44 is unused */
+#define __NR_brk		 45
+/* 46 is unused */
+/* 47 is unused (getgid16) */
+/* 48 is unused */
+/* 49 is unused */
+/* 50 is unused */
+#define __NR_acct		 51
+#define __NR_umount2		 52
+/* 53 is unused */
+#define __NR_ioctl		 54
+/* 55 is unused (fcntl) */
+/* 56 is unused */
+#define __NR_setpgid		 57
+/* 58 is unused */
+/* 59 is unused */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+/* 67 is unused */
+/* 68 is unused*/
+/* 69 is unused*/
+/* 70 is unused */
+/* 71 is unused */
+/* 72 is unused */
+/* 73 is unused */
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+/* 76 is unused (old getrlimit) */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+/* 80 is unused */
+/* 81 is unused */
+/* 82 is unused */
+#define __NR_symlink		 83
+/* 84 is unused */
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+/* 89 is unused */
+/* 90 is unused */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+/* 95 is unused */
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+/* 98 is unused */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+/* 101 is unused */
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+/* 109 is unused */
+/* 110 is unused */
+#define __NR_vhangup		111
+/* 112 is unused */
+/* 113 is unused */
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+/* 119 is unused */
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+/* 123 is unused */
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+/* 126 is unused */
+/* 127 is unused */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+/* 130 is unused */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+/* 137 is unused */
+/* 138 is unused */
+/* 139 is unused */
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+/* 164 is unused */
+/* 165 is unused */
+#define __NR_tas		166
+/* 167 is unused */
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+/* 170 is unused */
+/* 171 is unused */
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+/* 182 is unused */
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+/* 188 is unused */
+/* 189 is unused */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 222 is unused */
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+/* 251 is unused */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_sys_kexec_load	283
+#define __NR_waitid		284
+
+#define NR_syscalls 285
+
+/* user-visible error numbers are in the range -1 - -124: see
+ * <asm-m32r/errno.h>
+ */
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-(124 + 1))) { \
+	/* Avoid using "res" which is declared to be in register r0; \
+	   errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __res __asm__("r0"); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __res __asm__ ("r0") = (long)(arg1); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno), "0" (__res) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __arg2 __asm__ ("r1") = (long)(arg2); \
+register long __res __asm__ ("r0") = (long)(arg1); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno), "0" (__res), "r" (__arg2) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __arg3 __asm__ ("r2") = (long)(arg3); \
+register long __arg2 __asm__ ("r1") = (long)(arg2); \
+register long __res __asm__ ("r0") = (long)(arg1); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno), "0" (__res), "r" (__arg2), \
+		"r" (__arg3) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1,type2 arg2,type3 arg3,type4 arg4) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __arg4 __asm__ ("r3") = (long)(arg4); \
+register long __arg3 __asm__ ("r2") = (long)(arg3); \
+register long __arg2 __asm__ ("r1") = (long)(arg2); \
+register long __res __asm__ ("r0") = (long)(arg1); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno), "0" (__res), "r" (__arg2), \
+		"r" (__arg3), "r" (__arg4) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	type5,arg5) \
+type name(type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+register long __scno __asm__ ("r7") = __NR_##name; \
+register long __arg5 __asm__ ("r4") = (long)(arg5); \
+register long __arg4 __asm__ ("r3") = (long)(arg4); \
+register long __arg3 __asm__ ("r2") = (long)(arg3); \
+register long __arg2 __asm__ ("r1") = (long)(arg2); \
+register long __res __asm__ ("r0") = (long)(arg1); \
+__asm__ __volatile__ (\
+	"trap #" SYSCALL_VECTOR \
+	: "=r" (__res) \
+	: "r" (__scno), "0" (__res), "r" (__arg2), \
+		"r" (__arg3), "r" (__arg4), "r" (__arg5) \
+	: "memory"); \
+__syscall_return(type,__res); \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+static __inline__ _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			  unsigned long prot, unsigned long flags,
+			  unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(struct pt_regs regs);
+asmlinkage int sys_clone(struct pt_regs regs);
+asmlinkage int sys_fork(struct pt_regs regs);
+asmlinkage int sys_vfork(struct pt_regs regs);
+asmlinkage int sys_pipe(unsigned long __user *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* _ASM_M32R_UNISTD_H */
diff --git a/include/asm-m32r/user.h b/include/asm-m32r/user.h
new file mode 100644
index 000000000000..2ffd0c65a782
--- /dev/null
+++ b/include/asm-m32r/user.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_M32R_USER_H
+#define _ASM_M32R_USER_H
+
+/* $Id$ */
+
+/* orig : sh 2.4.18
+ * mod  : remove fpu registers
+ */
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).
+ *
+ * The actual file contents are as follows:
+ * UPAGE: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page.
+ * DATA: The data area is stored.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ * STACK: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these off in order to be
+ *	able to write an integer number of pages.
+ */
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_M32R_USER_H */
diff --git a/include/asm-m32r/vga.h b/include/asm-m32r/vga.h
new file mode 100644
index 000000000000..d0f4b6eed7a3
--- /dev/null
+++ b/include/asm-m32r/vga.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_M32R_VGA_H
+#define _ASM_M32R_VGA_H
+
+/* $Id$ */
+
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif  /* _ASM_M32R_VGA_H */
diff --git a/include/asm-m32r/xor.h b/include/asm-m32r/xor.h
new file mode 100644
index 000000000000..fd960dc9bf76
--- /dev/null
+++ b/include/asm-m32r/xor.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_M32R_XOR_H
+#define _ASM_M32R_XOR_H
+
+/* $Id$ */
+
+#include <asm-generic/xor.h>
+
+#endif  /* _ASM_M32R_XOR_H */
diff --git a/include/asm-m68k/a.out.h b/include/asm-m68k/a.out.h
new file mode 100644
index 000000000000..eda1662773b8
--- /dev/null
+++ b/include/asm-m68k/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __M68K_A_OUT_H__
+#define __M68K_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __M68K_A_OUT_H__ */
diff --git a/include/asm-m68k/adb.h b/include/asm-m68k/adb.h
new file mode 100644
index 000000000000..9176b55185bb
--- /dev/null
+++ b/include/asm-m68k/adb.h
@@ -0,0 +1,75 @@
+/*
+ * Definitions for talking to ADB and CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things on
+ * later Macintoshes
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+/* First byte sent to or received from CUDA */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+
+/* ADB commands (2nd byte) */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(1 + ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(8 + (reg) + ((id) << 4))
+#define ADB_READREG(id, reg)	(0xc + (reg) + ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of 2nd byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+#ifdef __KERNEL__
+
+struct adb_request {
+    unsigned char data[16];
+    int nbytes;
+    unsigned char reply[16];
+    int reply_len;
+    unsigned char reply_expected;
+    unsigned char sent;
+    unsigned char got_reply;
+    void (*done)(struct adb_request *);
+    void *arg;
+    struct adb_request *next;
+};
+
+void via_adb_init(void);
+int adb_request(struct adb_request *req,
+		 void (*done)(struct adb_request *), int nbytes, ...);
+int adb_send_request(struct adb_request *req);
+void adb_poll(void);
+int adb_register(int default_id,
+		 void (*handler)(unsigned char *, int, struct pt_regs *));
+
+#endif	/* __KERNEL */
diff --git a/include/asm-m68k/adb_iop.h b/include/asm-m68k/adb_iop.h
new file mode 100644
index 000000000000..8a48e56f2d62
--- /dev/null
+++ b/include/asm-m68k/adb_iop.h
@@ -0,0 +1,44 @@
+/*
+ * ADB through the IOP
+ * Written by Joshua M. Thompson
+ */
+
+/* IOP number and channel number for ADB */
+
+#define ADB_IOP		IOP_NUM_ISM
+#define ADB_CHAN	2
+
+/* From the A/UX headers...maybe important, maybe not */
+
+#define ADB_IOP_LISTEN	0x01
+#define ADB_IOP_TALK	0x02
+#define ADB_IOP_EXISTS	0x04
+#define ADB_IOP_FLUSH	0x08
+#define ADB_IOP_RESET	0x10
+#define ADB_IOP_INT	0x20
+#define ADB_IOP_POLL	0x40
+#define ADB_IOP_UNINT	0x80
+
+#define AIF_RESET	0x00
+#define AIF_FLUSH	0x01
+#define AIF_LISTEN	0x08
+#define AIF_TALK	0x0C
+
+/* Flag bits in struct adb_iopmsg */
+
+#define ADB_IOP_EXPLICIT	0x80	/* nonzero if explicit command */
+#define ADB_IOP_AUTOPOLL	0x40	/* auto/SRQ polling enabled    */
+#define ADB_IOP_SRQ		0x04	/* SRQ detected                */
+#define ADB_IOP_TIMEOUT		0x02	/* nonzero if timeout          */
+
+#ifndef __ASSEMBLY__
+
+struct adb_iopmsg {
+	__u8 flags;		/* ADB flags         */
+	__u8 count;		/* no. of data bytes */
+	__u8 cmd;		/* ADB command       */
+	__u8 data[8];		/* ADB data          */
+	__u8 spare[21];		/* spare             */
+};
+
+#endif /* __ASSEMBLY__ */
diff --git a/include/asm-m68k/amigahw.h b/include/asm-m68k/amigahw.h
new file mode 100644
index 000000000000..3ae5d8d55ba9
--- /dev/null
+++ b/include/asm-m68k/amigahw.h
@@ -0,0 +1,354 @@
+/*
+** asm-m68k/amigahw.h -- This header defines some macros and pointers for
+**                    the various Amiga custom hardware registers.
+**                    The naming conventions used here conform to those
+**                    used in the Amiga Hardware Reference Manual, 3rd Edition
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 9/24/92 by Greg Harp
+*/
+
+#ifndef _M68K_AMIGAHW_H
+#define _M68K_AMIGAHW_H
+
+#include <linux/ioport.h>
+
+    /*
+     *  Different Amiga models
+     */
+
+extern unsigned long amiga_model;
+
+#define AMI_UNKNOWN	(0)
+#define AMI_500		(1)
+#define AMI_500PLUS	(2)
+#define AMI_600		(3)
+#define AMI_1000	(4)
+#define AMI_1200	(5)
+#define AMI_2000	(6)
+#define AMI_2500	(7)
+#define AMI_3000	(8)
+#define AMI_3000T	(9)
+#define AMI_3000PLUS	(10)
+#define AMI_4000	(11)
+#define AMI_4000T	(12)
+#define AMI_CDTV	(13)
+#define AMI_CD32	(14)
+#define AMI_DRACO	(15)
+
+
+    /*
+     *  Chipsets
+     */
+
+extern unsigned long amiga_chipset;
+
+#define CS_STONEAGE	(0)
+#define CS_OCS		(1)
+#define CS_ECS		(2)
+#define CS_AGA		(3)
+
+
+    /*
+     *  Miscellaneous
+     */
+
+extern unsigned long amiga_eclock;	/* 700 kHz E Peripheral Clock */
+extern unsigned long amiga_masterclock;	/* 28 MHz Master Clock */
+extern unsigned long amiga_colorclock;	/* 3.5 MHz Color Clock */
+extern unsigned long amiga_chip_size;	/* Chip RAM Size (bytes) */
+extern unsigned char amiga_vblank;	/* VBLANK Frequency */
+extern unsigned char amiga_psfreq;	/* Power Supply Frequency */
+
+
+#define AMIGAHW_DECLARE(name)	unsigned name : 1
+#define AMIGAHW_SET(name)	(amiga_hw_present.name = 1)
+#define AMIGAHW_PRESENT(name)	(amiga_hw_present.name)
+
+struct amiga_hw_present {
+    /* video hardware */
+    AMIGAHW_DECLARE(AMI_VIDEO);		/* Amiga Video */
+    AMIGAHW_DECLARE(AMI_BLITTER);	/* Amiga Blitter */
+    AMIGAHW_DECLARE(AMBER_FF);		/* Amber Flicker Fixer */
+    /* sound hardware */
+    AMIGAHW_DECLARE(AMI_AUDIO);		/* Amiga Audio */
+    /* disk storage interfaces */
+    AMIGAHW_DECLARE(AMI_FLOPPY);	/* Amiga Floppy */
+    AMIGAHW_DECLARE(A3000_SCSI);	/* SCSI (wd33c93, A3000 alike) */
+    AMIGAHW_DECLARE(A4000_SCSI);	/* SCSI (ncr53c710, A4000T alike) */
+    AMIGAHW_DECLARE(A1200_IDE);		/* IDE (A1200 alike) */
+    AMIGAHW_DECLARE(A4000_IDE);		/* IDE (A4000 alike) */
+    AMIGAHW_DECLARE(CD_ROM);		/* CD ROM drive */
+    /* other I/O hardware */
+    AMIGAHW_DECLARE(AMI_KEYBOARD);	/* Amiga Keyboard */
+    AMIGAHW_DECLARE(AMI_MOUSE);		/* Amiga Mouse */
+    AMIGAHW_DECLARE(AMI_SERIAL);	/* Amiga Serial */
+    AMIGAHW_DECLARE(AMI_PARALLEL);	/* Amiga Parallel */
+    /* real time clocks */
+    AMIGAHW_DECLARE(A2000_CLK);		/* Hardware Clock (A2000 alike) */
+    AMIGAHW_DECLARE(A3000_CLK);		/* Hardware Clock (A3000 alike) */
+    /* supporting hardware */
+    AMIGAHW_DECLARE(CHIP_RAM);		/* Chip RAM */
+    AMIGAHW_DECLARE(PAULA);		/* Paula (8364) */
+    AMIGAHW_DECLARE(DENISE);		/* Denise (8362) */
+    AMIGAHW_DECLARE(DENISE_HR);		/* Denise (8373) */
+    AMIGAHW_DECLARE(LISA);		/* Lisa (8375) */
+    AMIGAHW_DECLARE(AGNUS_PAL);		/* Normal/Fat PAL Agnus (8367/8371) */
+    AMIGAHW_DECLARE(AGNUS_NTSC);	/* Normal/Fat NTSC Agnus (8361/8370) */
+    AMIGAHW_DECLARE(AGNUS_HR_PAL);	/* Fat Hires PAL Agnus (8372) */
+    AMIGAHW_DECLARE(AGNUS_HR_NTSC);	/* Fat Hires NTSC Agnus (8372) */
+    AMIGAHW_DECLARE(ALICE_PAL);		/* PAL Alice (8374) */
+    AMIGAHW_DECLARE(ALICE_NTSC);	/* NTSC Alice (8374) */
+    AMIGAHW_DECLARE(MAGIC_REKICK);	/* A3000 Magic Hard Rekick */
+    AMIGAHW_DECLARE(PCMCIA);		/* PCMCIA Slot */
+    AMIGAHW_DECLARE(GG2_ISA);		/* GG2 Zorro2ISA Bridge */
+    AMIGAHW_DECLARE(ZORRO);		/* Zorro AutoConfig */
+    AMIGAHW_DECLARE(ZORRO3);		/* Zorro III */
+};
+
+extern struct amiga_hw_present amiga_hw_present;
+
+struct CUSTOM {
+    unsigned short bltddat;
+    unsigned short dmaconr;
+    unsigned short vposr;
+    unsigned short vhposr;
+    unsigned short dskdatr;
+    unsigned short joy0dat;
+    unsigned short joy1dat;
+    unsigned short clxdat;
+    unsigned short adkconr;
+    unsigned short pot0dat;
+    unsigned short pot1dat;
+    unsigned short potgor;
+    unsigned short serdatr;
+    unsigned short dskbytr;
+    unsigned short intenar;
+    unsigned short intreqr;
+    unsigned char  *dskptr;
+    unsigned short dsklen;
+    unsigned short dskdat;
+    unsigned short refptr;
+    unsigned short vposw;
+    unsigned short vhposw;
+    unsigned short copcon;
+    unsigned short serdat;
+    unsigned short serper;
+    unsigned short potgo;
+    unsigned short joytest;
+    unsigned short strequ;
+    unsigned short strvbl;
+    unsigned short strhor;
+    unsigned short strlong;
+    unsigned short bltcon0;
+    unsigned short bltcon1;
+    unsigned short bltafwm;
+    unsigned short bltalwm;
+    unsigned char  *bltcpt;
+    unsigned char  *bltbpt;
+    unsigned char  *bltapt;
+    unsigned char  *bltdpt;
+    unsigned short bltsize;
+    unsigned char  pad2d;
+    unsigned char  bltcon0l;
+    unsigned short bltsizv;
+    unsigned short bltsizh;
+    unsigned short bltcmod;
+    unsigned short bltbmod;
+    unsigned short bltamod;
+    unsigned short bltdmod;
+    unsigned short spare2[4];
+    unsigned short bltcdat;
+    unsigned short bltbdat;
+    unsigned short bltadat;
+    unsigned short spare3[3];
+    unsigned short deniseid;
+    unsigned short dsksync;
+    unsigned short *cop1lc;
+    unsigned short *cop2lc;
+    unsigned short copjmp1;
+    unsigned short copjmp2;
+    unsigned short copins;
+    unsigned short diwstrt;
+    unsigned short diwstop;
+    unsigned short ddfstrt;
+    unsigned short ddfstop;
+    unsigned short dmacon;
+    unsigned short clxcon;
+    unsigned short intena;
+    unsigned short intreq;
+    unsigned short adkcon;
+    struct {
+	unsigned short	*audlc;
+	unsigned short audlen;
+	unsigned short audper;
+	unsigned short audvol;
+	unsigned short auddat;
+	unsigned short audspare[2];
+    } aud[4];
+    unsigned char  *bplpt[8];
+    unsigned short bplcon0;
+    unsigned short bplcon1;
+    unsigned short bplcon2;
+    unsigned short bplcon3;
+    unsigned short bpl1mod;
+    unsigned short bpl2mod;
+    unsigned short bplcon4;
+    unsigned short clxcon2;
+    unsigned short bpldat[8];
+    unsigned char  *sprpt[8];
+    struct {
+	unsigned short pos;
+	unsigned short ctl;
+	unsigned short dataa;
+	unsigned short datab;
+    } spr[8];
+    unsigned short color[32];
+    unsigned short htotal;
+    unsigned short hsstop;
+    unsigned short hbstrt;
+    unsigned short hbstop;
+    unsigned short vtotal;
+    unsigned short vsstop;
+    unsigned short vbstrt;
+    unsigned short vbstop;
+    unsigned short sprhstrt;
+    unsigned short sprhstop;
+    unsigned short bplhstrt;
+    unsigned short bplhstop;
+    unsigned short hhposw;
+    unsigned short hhposr;
+    unsigned short beamcon0;
+    unsigned short hsstrt;
+    unsigned short vsstrt;
+    unsigned short hcenter;
+    unsigned short diwhigh;
+    unsigned short spare4[11];
+    unsigned short fmode;
+};
+
+/*
+ * DMA register bits
+ */
+#define DMAF_SETCLR		(0x8000)
+#define DMAF_AUD0		(0x0001)
+#define DMAF_AUD1		(0x0002)
+#define DMAF_AUD2		(0x0004)
+#define DMAF_AUD3		(0x0008)
+#define DMAF_DISK		(0x0010)
+#define DMAF_SPRITE		(0x0020)
+#define DMAF_BLITTER		(0x0040)
+#define DMAF_COPPER		(0x0080)
+#define DMAF_RASTER		(0x0100)
+#define DMAF_MASTER		(0x0200)
+#define DMAF_BLITHOG		(0x0400)
+#define DMAF_BLTNZERO		(0x2000)
+#define DMAF_BLTDONE		(0x4000)
+#define DMAF_ALL		(0x01FF)
+
+struct CIA {
+    unsigned char pra;		char pad0[0xff];
+    unsigned char prb;		char pad1[0xff];
+    unsigned char ddra;		char pad2[0xff];
+    unsigned char ddrb;		char pad3[0xff];
+    unsigned char talo;		char pad4[0xff];
+    unsigned char tahi;		char pad5[0xff];
+    unsigned char tblo;		char pad6[0xff];
+    unsigned char tbhi;		char pad7[0xff];
+    unsigned char todlo;	char pad8[0xff];
+    unsigned char todmid;	char pad9[0xff];
+    unsigned char todhi;	char pada[0x1ff];
+    unsigned char sdr;		char padb[0xff];
+    unsigned char icr;		char padc[0xff];
+    unsigned char cra;		char padd[0xff];
+    unsigned char crb;		char pade[0xff];
+};
+
+#define zTwoBase (0x80000000)
+#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase)
+#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase)
+
+#define CUSTOM_PHYSADDR     (0xdff000)
+#define custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR)))
+
+#define CIAA_PHYSADDR	  (0xbfe001)
+#define CIAB_PHYSADDR	  (0xbfd000)
+#define ciaa   ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR)))
+#define ciab   ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR)))
+
+#define CHIP_PHYSADDR	    (0x000000)
+
+void amiga_chip_init (void);
+void *amiga_chip_alloc(unsigned long size, const char *name);
+void *amiga_chip_alloc_res(unsigned long size, struct resource *res);
+void amiga_chip_free(void *ptr);
+unsigned long amiga_chip_avail( void ); /*MILAN*/
+extern volatile unsigned short amiga_audio_min_period;
+
+static inline void amifb_video_off(void)
+{
+	if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) {
+		/* program Denise/Lisa for a higher maximum play rate */
+		custom.htotal = 113;        /* 31 kHz */
+		custom.vtotal = 223;        /* 70 Hz */
+		custom.beamcon0 = 0x4390;   /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */
+		/* suspend the monitor */
+		custom.hsstrt = custom.hsstop = 116;
+		custom.vsstrt = custom.vsstop = 226;
+		amiga_audio_min_period = 57;
+	}
+}
+
+struct tod3000 {
+  unsigned int  :28, second2:4;	/* lower digit */
+  unsigned int  :28, second1:4;	/* upper digit */
+  unsigned int  :28, minute2:4;	/* lower digit */
+  unsigned int  :28, minute1:4;	/* upper digit */
+  unsigned int  :28, hour2:4;	/* lower digit */
+  unsigned int  :28, hour1:4;	/* upper digit */
+  unsigned int  :28, weekday:4;
+  unsigned int  :28, day2:4;	/* lower digit */
+  unsigned int  :28, day1:4;	/* upper digit */
+  unsigned int  :28, month2:4;	/* lower digit */
+  unsigned int  :28, month1:4;	/* upper digit */
+  unsigned int  :28, year2:4;	/* lower digit */
+  unsigned int  :28, year1:4;	/* upper digit */
+  unsigned int  :28, cntrl1:4;	/* control-byte 1 */
+  unsigned int  :28, cntrl2:4;	/* control-byte 2 */
+  unsigned int  :28, cntrl3:4;	/* control-byte 3 */
+};
+#define TOD3000_CNTRL1_HOLD	0
+#define TOD3000_CNTRL1_FREE	9
+#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000)))
+
+struct tod2000 {
+  unsigned int  :28, second2:4;	/* lower digit */
+  unsigned int  :28, second1:4;	/* upper digit */
+  unsigned int  :28, minute2:4;	/* lower digit */
+  unsigned int  :28, minute1:4;	/* upper digit */
+  unsigned int  :28, hour2:4;	/* lower digit */
+  unsigned int  :28, hour1:4;	/* upper digit */
+  unsigned int  :28, day2:4;	/* lower digit */
+  unsigned int  :28, day1:4;	/* upper digit */
+  unsigned int  :28, month2:4;	/* lower digit */
+  unsigned int  :28, month1:4;	/* upper digit */
+  unsigned int  :28, year2:4;	/* lower digit */
+  unsigned int  :28, year1:4;	/* upper digit */
+  unsigned int  :28, weekday:4;
+  unsigned int  :28, cntrl1:4;	/* control-byte 1 */
+  unsigned int  :28, cntrl2:4;	/* control-byte 2 */
+  unsigned int  :28, cntrl3:4;	/* control-byte 3 */
+};
+
+#define TOD2000_CNTRL1_HOLD	(1<<0)
+#define TOD2000_CNTRL1_BUSY	(1<<1)
+#define TOD2000_CNTRL3_24HMODE	(1<<2)
+#define TOD2000_HOUR1_PM	(1<<2)
+#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000)))
+
+#endif /* _M68K_AMIGAHW_H */
diff --git a/include/asm-m68k/amigaints.h b/include/asm-m68k/amigaints.h
new file mode 100644
index 000000000000..2aff4cfbf7b3
--- /dev/null
+++ b/include/asm-m68k/amigaints.h
@@ -0,0 +1,133 @@
+/*
+** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 10/2/92 by Greg Harp
+*/
+
+#ifndef _ASMm68k_AMIGAINTS_H_
+#define _ASMm68k_AMIGAINTS_H_
+
+/*
+** Amiga Interrupt sources.
+**
+*/
+
+#define AUTO_IRQS           (8)
+#define AMI_STD_IRQS        (14)
+#define CIA_IRQS            (5)
+#define AMI_IRQS            (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
+
+/* vertical blanking interrupt */
+#define IRQ_AMIGA_VERTB     0
+
+/* copper interrupt */
+#define IRQ_AMIGA_COPPER    1
+
+/* Audio interrupts */
+#define IRQ_AMIGA_AUD0	    2
+#define IRQ_AMIGA_AUD1	    3
+#define IRQ_AMIGA_AUD2	    4
+#define IRQ_AMIGA_AUD3	    5
+
+/* Blitter done interrupt */
+#define IRQ_AMIGA_BLIT	    6
+
+/* floppy disk interrupts */
+#define IRQ_AMIGA_DSKSYN    7
+#define IRQ_AMIGA_DSKBLK    8
+
+/* builtin serial port interrupts */
+#define IRQ_AMIGA_RBF	    9
+#define IRQ_AMIGA_TBE	    10
+
+/* software interrupts */
+#define IRQ_AMIGA_SOFT      11
+
+/* interrupts from external hardware */
+#define IRQ_AMIGA_PORTS	    12
+#define IRQ_AMIGA_EXTER	    13
+
+/* CIA interrupt sources */
+#define IRQ_AMIGA_CIAA      14
+#define IRQ_AMIGA_CIAA_TA   14
+#define IRQ_AMIGA_CIAA_TB   15
+#define IRQ_AMIGA_CIAA_ALRM 16
+#define IRQ_AMIGA_CIAA_SP   17
+#define IRQ_AMIGA_CIAA_FLG  18
+#define IRQ_AMIGA_CIAB      19
+#define IRQ_AMIGA_CIAB_TA   19
+#define IRQ_AMIGA_CIAB_TB   20
+#define IRQ_AMIGA_CIAB_ALRM 21
+#define IRQ_AMIGA_CIAB_SP   22
+#define IRQ_AMIGA_CIAB_FLG  23
+
+/* auto-vector interrupts */
+#define IRQ_AMIGA_AUTO      24
+#define IRQ_AMIGA_AUTO_0    24 /* This is just a dummy */
+#define IRQ_AMIGA_AUTO_1    25
+#define IRQ_AMIGA_AUTO_2    26
+#define IRQ_AMIGA_AUTO_3    27
+#define IRQ_AMIGA_AUTO_4    28
+#define IRQ_AMIGA_AUTO_5    29
+#define IRQ_AMIGA_AUTO_6    30
+#define IRQ_AMIGA_AUTO_7    31
+
+#define IRQ_FLOPPY	    IRQ_AMIGA_DSKBLK
+
+/* INTREQR masks */
+#define IRQ1_MASK   0x0007	/* INTREQR mask for IRQ 1 */
+#define IRQ2_MASK   0x0008	/* INTREQR mask for IRQ 2 */
+#define IRQ3_MASK   0x0070	/* INTREQR mask for IRQ 3 */
+#define IRQ4_MASK   0x0780	/* INTREQR mask for IRQ 4 */
+#define IRQ5_MASK   0x1800	/* INTREQR mask for IRQ 5 */
+#define IRQ6_MASK   0x2000	/* INTREQR mask for IRQ 6 */
+#define IRQ7_MASK   0x4000	/* INTREQR mask for IRQ 7 */
+
+#define IF_SETCLR   0x8000      /* set/clr bit */
+#define IF_INTEN    0x4000	/* master interrupt bit in INT* registers */
+#define IF_EXTER    0x2000	/* external level 6 and CIA B interrupt */
+#define IF_DSKSYN   0x1000	/* disk sync interrupt */
+#define IF_RBF	    0x0800	/* serial receive buffer full interrupt */
+#define IF_AUD3     0x0400	/* audio channel 3 done interrupt */
+#define IF_AUD2     0x0200	/* audio channel 2 done interrupt */
+#define IF_AUD1     0x0100	/* audio channel 1 done interrupt */
+#define IF_AUD0     0x0080	/* audio channel 0 done interrupt */
+#define IF_BLIT     0x0040	/* blitter done interrupt */
+#define IF_VERTB    0x0020	/* vertical blanking interrupt */
+#define IF_COPER    0x0010	/* copper interrupt */
+#define IF_PORTS    0x0008	/* external level 2 and CIA A interrupt */
+#define IF_SOFT     0x0004	/* software initiated interrupt */
+#define IF_DSKBLK   0x0002	/* diskblock DMA finished */
+#define IF_TBE	    0x0001	/* serial transmit buffer empty interrupt */
+
+extern void amiga_do_irq(int irq, struct pt_regs *fp);
+extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
+
+extern unsigned short amiga_intena_vals[];
+
+/* CIA interrupt control register bits */
+
+#define CIA_ICR_TA	0x01
+#define CIA_ICR_TB	0x02
+#define CIA_ICR_ALRM	0x04
+#define CIA_ICR_SP	0x08
+#define CIA_ICR_FLG	0x10
+#define CIA_ICR_ALL	0x1f
+#define CIA_ICR_SETCLR	0x80
+
+/* to access the interrupt control registers of CIA's use only
+** these functions, they behave exactly like the amiga os routines
+*/
+
+extern struct ciabase ciaa_base, ciab_base;
+
+extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask);
+extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask);
+
+#endif /* asm-m68k/amigaints.h */
diff --git a/include/asm-m68k/amigayle.h b/include/asm-m68k/amigayle.h
new file mode 100644
index 000000000000..bb5a6aa329f3
--- /dev/null
+++ b/include/asm-m68k/amigayle.h
@@ -0,0 +1,107 @@
+/*
+** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
+**                        found on the Amiga 1200
+**                        This information was found by disassembling card.resource,
+**                        so the definitions may not be 100% correct
+**                        anyone has an official doc ?
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 11/28/97 by Alain Malek
+*/
+
+#ifndef _M68K_AMIGAYLE_H_
+#define _M68K_AMIGAYLE_H_
+
+#include <linux/types.h>
+#include <asm/amigahw.h>
+
+/* memory layout */
+
+#define GAYLE_RAM		(0x600000+zTwoBase)
+#define GAYLE_RAMSIZE		(0x400000)
+#define GAYLE_ATTRIBUTE		(0xa00000+zTwoBase)
+#define GAYLE_ATTRIBUTESIZE	(0x020000)
+#define GAYLE_IO		(0xa20000+zTwoBase)	/* 16bit and even 8bit registers */
+#define GAYLE_IOSIZE		(0x010000)
+#define GAYLE_IO_8BITODD	(0xa30000+zTwoBase)	/* odd 8bit registers */
+
+/* offset for accessing odd IO registers */
+#define GAYLE_ODD		(GAYLE_IO_8BITODD-GAYLE_IO-1)
+
+/* GAYLE registers */
+
+struct GAYLE {
+	u_char cardstatus;
+	u_char pad0[0x1000-1];
+
+	u_char intreq;
+	u_char pad1[0x1000-1];
+
+	u_char inten;
+	u_char pad2[0x1000-1];
+
+	u_char config;
+	u_char pad3[0x1000-1];
+};
+
+#define GAYLE_ADDRESS	(0xda8000)	/* gayle main registers base address */
+
+#define GAYLE_RESET	(0xa40000)	/* write 0x00 to start reset,
+                                           read 1 byte to stop reset */
+
+#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
+#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
+
+#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
+
+#if 0
+#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+
+#define gayle_inw(a) readw( GAYLE_IO+(a) )
+#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
+#endif
+
+/* GAYLE_CARDSTATUS bit def */
+
+#define GAYLE_CS_CCDET		0x40	/* credit card detect */
+#define GAYLE_CS_BVD1		0x20	/* battery voltage detect 1 */
+#define GAYLE_CS_SC		0x20	/* credit card status change */
+#define GAYLE_CS_BVD2		0x10	/* battery voltage detect 2 */
+#define GAYLE_CS_DA		0x10	/* digital audio */
+#define GAYLE_CS_WR		0x08	/* write enable (1 == enabled) */
+#define GAYLE_CS_BSY		0x04	/* credit card busy */
+#define GAYLE_CS_IRQ		0x04	/* interrupt request */
+
+/* GAYLE_IRQ bit def */
+
+#define GAYLE_IRQ_IDE		0x80
+#define GAYLE_IRQ_CCDET		0x40
+#define GAYLE_IRQ_BVD1		0x20
+#define GAYLE_IRQ_SC		0x20
+#define GAYLE_IRQ_BVD2		0x10
+#define GAYLE_IRQ_DA		0x10
+#define GAYLE_IRQ_WR		0x08
+#define GAYLE_IRQ_BSY		0x04
+#define GAYLE_IRQ_IRQ		0x04
+#define GAYLE_IRQ_IDEACK1	0x02
+#define GAYLE_IRQ_IDEACK0	0x01
+
+/* GAYLE_CONFIG bit def
+   (bit 0-1 for program voltage, bit 2-3 for access speed */
+
+#define GAYLE_CFG_0V		0x00
+#define GAYLE_CFG_5V		0x01
+#define GAYLE_CFG_12V		0x02
+
+#define GAYLE_CFG_100NS		0x08
+#define GAYLE_CFG_150NS		0x04
+#define GAYLE_CFG_250NS		0x00
+#define GAYLE_CFG_720NS		0x0c
+
+#endif /* asm-m68k/amigayle.h */
diff --git a/include/asm-m68k/amipcmcia.h b/include/asm-m68k/amipcmcia.h
new file mode 100644
index 000000000000..6f1ec1887d82
--- /dev/null
+++ b/include/asm-m68k/amipcmcia.h
@@ -0,0 +1,110 @@
+/*
+** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 12/10/97 by Alain Malek
+*/
+
+#ifndef __AMIGA_PCMCIA_H__
+#define __AMIGA_PCMCIA_H__
+
+#include <asm/amigayle.h>
+
+/* prototypes */
+
+void pcmcia_reset(void);
+int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len);
+void pcmcia_program_voltage(int voltage);
+void pcmcia_access_speed(int speed);
+void pcmcia_write_enable(void);
+void pcmcia_write_disable(void);
+
+static inline u_char pcmcia_read_status(void)
+{
+	return (gayle.cardstatus & 0x7c);
+}
+
+static inline u_char pcmcia_get_intreq(void)
+{
+	return (gayle.intreq);
+}
+
+static inline void pcmcia_ack_int(u_char intreq)
+{
+	gayle.intreq = 0xf8;
+}
+
+static inline void pcmcia_enable_irq(void)
+{
+	gayle.inten |= GAYLE_IRQ_IRQ;
+}
+
+static inline void pcmcia_disable_irq(void)
+{
+	gayle.inten &= ~GAYLE_IRQ_IRQ;
+}
+
+#define PCMCIA_INSERTED	(gayle.cardstatus & GAYLE_CS_CCDET)
+
+/* valid voltages for pcmcia_ProgramVoltage */
+
+#define PCMCIA_0V	0
+#define PCMCIA_5V	5
+#define PCMCIA_12V	12
+
+/* valid speeds for pcmcia_AccessSpeed */
+
+#define PCMCIA_SPEED_100NS	100
+#define PCMCIA_SPEED_150NS	150
+#define PCMCIA_SPEED_250NS	250
+#define PCMCIA_SPEED_720NS	720
+
+/* PCMCIA Tuple codes */
+
+#define CISTPL_NULL		0x00
+#define CISTPL_DEVICE		0x01
+#define CISTPL_LONGLINK_CB	0x02
+#define CISTPL_CONFIG_CB	0x04
+#define CISTPL_CFTABLE_ENTRY_CB	0x05
+#define CISTPL_LONGLINK_MFC	0x06
+#define CISTPL_BAR		0x07
+#define CISTPL_CHECKSUM		0x10
+#define CISTPL_LONGLINK_A	0x11
+#define CISTPL_LONGLINK_C	0x12
+#define CISTPL_LINKTARGET	0x13
+#define CISTPL_NO_LINK		0x14
+#define CISTPL_VERS_1		0x15
+#define CISTPL_ALTSTR		0x16
+#define CISTPL_DEVICE_A		0x17
+#define CISTPL_JEDEC_C		0x18
+#define CISTPL_JEDEC_A		0x19
+#define CISTPL_CONFIG		0x1a
+#define CISTPL_CFTABLE_ENTRY	0x1b
+#define CISTPL_DEVICE_OC	0x1c
+#define CISTPL_DEVICE_OA	0x1d
+#define CISTPL_DEVICE_GEO	0x1e
+#define CISTPL_DEVICE_GEO_A	0x1f
+#define CISTPL_MANFID		0x20
+#define CISTPL_FUNCID		0x21
+#define CISTPL_FUNCE		0x22
+#define CISTPL_SWIL		0x23
+#define CISTPL_END		0xff
+
+/* FUNCID */
+
+#define CISTPL_FUNCID_MULTI	0x00
+#define CISTPL_FUNCID_MEMORY	0x01
+#define CISTPL_FUNCID_SERIAL	0x02
+#define CISTPL_FUNCID_PARALLEL	0x03
+#define CISTPL_FUNCID_FIXED	0x04
+#define CISTPL_FUNCID_VIDEO	0x05
+#define CISTPL_FUNCID_NETWORK	0x06
+#define CISTPL_FUNCID_AIMS	0x07
+#define CISTPL_FUNCID_SCSI	0x08
+
+#endif
diff --git a/include/asm-m68k/apollodma.h b/include/asm-m68k/apollodma.h
new file mode 100644
index 000000000000..6821e3ba32e9
--- /dev/null
+++ b/include/asm-m68k/apollodma.h
@@ -0,0 +1,248 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_APOLLO_DMA_H
+#define _ASM_APOLLO_DMA_H
+
+#include <asm/apollohw.h>		/* need byte IO */
+#include <linux/spinlock.h>		/* And spinlocks */
+#include <linux/delay.h>
+
+
+#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
+#define dma_inb(addr)	   (*((volatile unsigned char *)(addr+IO_BASE)))
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x10C00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0x10D00	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		(IO_DMA1_BASE+0x08) /* command register (w) */
+#define DMA1_STAT_REG		(IO_DMA1_BASE+0x08) /* status register (r) */
+#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
+#define DMA1_MASK_REG		(IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
+#define DMA1_MODE_REG		(IO_DMA1_BASE+0x0B) /* mode register (w) */
+#define DMA1_CLEAR_FF_REG	(IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
+#define DMA1_RESET_REG		(IO_DMA1_BASE+0x0D) /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
+#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		(IO_DMA2_BASE+0x10) /* command register (w) */
+#define DMA2_STAT_REG		(IO_DMA2_BASE+0x10) /* status register (r) */
+#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
+#define DMA2_MASK_REG		(IO_DMA2_BASE+0x14) /* single-channel mask (w) */
+#define DMA2_MODE_REG		(IO_DMA2_BASE+0x16) /* mode register (w) */
+#define DMA2_CLEAR_FF_REG	(IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
+#define DMA2_RESET_REG		(IO_DMA2_BASE+0x1A) /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
+#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
+
+#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
+#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
+#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
+#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
+#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
+#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
+#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
+#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
+
+#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
+#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
+#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
+#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
+#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
+#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
+#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
+#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+#define DMA_8BIT 0
+#define DMA_16BIT 1
+#define DMA_BUSMASTER 2
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* These are in arch/m68k/apollo/dma.c: */
+extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
+extern void dma_unmap_page(unsigned short dma_addr);
+
+#endif /* _ASM_APOLLO_DMA_H */
diff --git a/include/asm-m68k/apollohw.h b/include/asm-m68k/apollohw.h
new file mode 100644
index 000000000000..4304e1c33e17
--- /dev/null
+++ b/include/asm-m68k/apollohw.h
@@ -0,0 +1,104 @@
+/* apollohw.h : some structures to access apollo HW */
+
+#ifndef _ASMm68k_APOLLOHW_H_
+#define _ASMm68k_APOLLOHW_H_
+
+/*
+   apollo models
+*/
+
+extern u_long apollo_model;
+
+#define APOLLO_UNKNOWN (0)
+#define APOLLO_DN3000 (1)
+#define APOLLO_DN3010 (2)
+#define APOLLO_DN3500 (3)
+#define APOLLO_DN4000 (4)
+#define APOLLO_DN4500 (5)
+
+/*
+   see scn2681 data sheet for more info.
+   member names are read_write.
+*/
+
+#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x
+
+struct SCN2681 {
+
+	DECLARE_2681_FIELD(mra);
+	DECLARE_2681_FIELD(sra_csra);
+	DECLARE_2681_FIELD(BRGtest_cra);
+	DECLARE_2681_FIELD(rhra_thra);
+	DECLARE_2681_FIELD(ipcr_acr);
+	DECLARE_2681_FIELD(isr_imr);
+	DECLARE_2681_FIELD(ctu_ctur);
+	DECLARE_2681_FIELD(ctl_ctlr);
+	DECLARE_2681_FIELD(mrb);
+	DECLARE_2681_FIELD(srb_csrb);
+	DECLARE_2681_FIELD(tst_crb);
+	DECLARE_2681_FIELD(rhrb_thrb);
+	DECLARE_2681_FIELD(reserved);
+	DECLARE_2681_FIELD(ip_opcr);
+	DECLARE_2681_FIELD(startCnt_setOutBit);
+	DECLARE_2681_FIELD(stopCnt_resetOutBit);
+
+};
+
+#if 0
+struct mc146818 {
+
+	unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
+		     minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
+	unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
+		     day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
+	unsigned int month1:4, month2:4, year1:4, year2:4, :16;
+
+};
+#endif
+
+struct mc146818 {
+        unsigned char second, alarm_second;
+        unsigned char minute, alarm_minute;
+        unsigned char hours, alarm_hours;
+        unsigned char day_of_week, day_of_month;
+        unsigned char month, year;
+};
+
+
+#define IO_BASE 0x80000000
+
+extern u_long sio01_physaddr;
+extern u_long sio23_physaddr;
+extern u_long rtc_physaddr;
+extern u_long pica_physaddr;
+extern u_long picb_physaddr;
+extern u_long cpuctrl_physaddr;
+extern u_long timer_physaddr;
+
+#define SAU7_SIO01_PHYSADDR 0x10400
+#define SAU7_SIO23_PHYSADDR 0x10500
+#define SAU7_RTC_PHYSADDR 0x10900
+#define SAU7_PICA 0x11000
+#define SAU7_PICB 0x11100
+#define SAU7_CPUCTRL 0x10100
+#define SAU7_TIMER 0x010800
+
+#define SAU8_SIO01_PHYSADDR 0x8400
+#define SAU8_RTC_PHYSADDR 0x8900
+#define SAU8_PICA 0x9400
+#define SAU8_PICB 0x9500
+#define SAU8_CPUCTRL 0x8100
+#define SAU8_TIMER 0x8800
+
+#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr)))
+#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr)))
+#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr)))
+#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
+#define pica (IO_BASE + pica_physaddr)
+#define picb (IO_BASE + picb_physaddr)
+#define timer (IO_BASE + timer_physaddr)
+#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
+
+#define isaIO2mem(x) (((((x) & 0x3f8)  << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
+
+#endif
diff --git a/include/asm-m68k/atafd.h b/include/asm-m68k/atafd.h
new file mode 100644
index 000000000000..8456889ee7da
--- /dev/null
+++ b/include/asm-m68k/atafd.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_M68K_FD_H
+#define _ASM_M68K_FD_H
+
+/* Definitions for the Atari Floppy driver */
+
+struct atari_format_descr {
+    int track;			/* to be formatted */
+    int head;			/*   ""     ""     */
+    int sect_offset;		/* offset of first sector */
+};
+
+#endif
diff --git a/include/asm-m68k/atafdreg.h b/include/asm-m68k/atafdreg.h
new file mode 100644
index 000000000000..bbf80949fd9f
--- /dev/null
+++ b/include/asm-m68k/atafdreg.h
@@ -0,0 +1,79 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+
+/*
+** WD1772 stuff
+ */
+
+/* register codes */
+
+#define FDCSELREG_STP   (0x80)   /* command/status register */
+#define FDCSELREG_TRA   (0x82)   /* track register */
+#define FDCSELREG_SEC   (0x84)   /* sector register */
+#define FDCSELREG_DTA   (0x86)   /* data register */
+
+/* register names for FDC_READ/WRITE macros */
+
+#define FDCREG_CMD		0
+#define FDCREG_STATUS	0
+#define FDCREG_TRACK	2
+#define FDCREG_SECTOR	4
+#define FDCREG_DATA		6
+
+/* command opcodes */
+
+#define FDCCMD_RESTORE  (0x00)   /*  -                   */
+#define FDCCMD_SEEK     (0x10)   /*   |                  */
+#define FDCCMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
+#define FDCCMD_STIN     (0x40)   /*   |                  */
+#define FDCCMD_STOT     (0x60)   /*  -                   */
+#define FDCCMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
+#define FDCCMD_WRSEC    (0xa0)   /*  -          "        */
+#define FDCCMD_RDADR    (0xc0)   /*  -                   */
+#define FDCCMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
+#define FDCCMD_WRTRA    (0xf0)   /*  -                   */
+#define FDCCMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
+
+/* command modifier bits */
+
+#define FDCCMDADD_SR6   (0x00)   /* step rate settings */
+#define FDCCMDADD_SR12  (0x01)
+#define FDCCMDADD_SR2   (0x02)
+#define FDCCMDADD_SR3   (0x03)
+#define FDCCMDADD_V     (0x04)   /* verify */
+#define FDCCMDADD_H     (0x08)   /* wait for spin-up */
+#define FDCCMDADD_U     (0x10)   /* update track register */
+#define FDCCMDADD_M     (0x10)   /* multiple sector access */
+#define FDCCMDADD_E     (0x04)   /* head settling flag */
+#define FDCCMDADD_P     (0x02)   /* precompensation off */
+#define FDCCMDADD_A0    (0x01)   /* DAM flag */
+
+/* status register bits */
+
+#define	FDCSTAT_MOTORON	(0x80)   /* motor on */
+#define	FDCSTAT_WPROT	(0x40)   /* write protected (FDCCMD_WR*) */
+#define	FDCSTAT_SPINUP	(0x20)   /* motor speed stable (Type I) */
+#define	FDCSTAT_DELDAM	(0x20)   /* sector has deleted DAM (Type II+III) */
+#define	FDCSTAT_RECNF	(0x10)   /* record not found */
+#define	FDCSTAT_CRC		(0x08)   /* CRC error */
+#define	FDCSTAT_TR00	(0x04)   /* Track 00 flag (Type I) */
+#define	FDCSTAT_LOST	(0x04)   /* Lost Data (Type II+III) */
+#define	FDCSTAT_IDX		(0x02)   /* Index status (Type I) */
+#define	FDCSTAT_DRQ		(0x02)   /* DRQ status (Type II+III) */
+#define	FDCSTAT_BUSY	(0x01)   /* FDC is busy */
+
+
+/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
+#define DSKSIDE     (0x01)
+
+#define DSKDRVNONE  (0x06)
+#define DSKDRV0     (0x02)
+#define DSKDRV1     (0x04)
+
+/* step rates */
+#define	FDCSTEP_6	0x00
+#define	FDCSTEP_12	0x01
+#define	FDCSTEP_2	0x02
+#define	FDCSTEP_3	0x03
+
+#endif
diff --git a/include/asm-m68k/atari_SLM.h b/include/asm-m68k/atari_SLM.h
new file mode 100644
index 000000000000..42f4fcdd8bc7
--- /dev/null
+++ b/include/asm-m68k/atari_SLM.h
@@ -0,0 +1,28 @@
+
+#ifndef _ATARI_SLM_H
+#define _ATARI_SLM_H
+
+/* Atari SLM laser printer specific ioctls */
+
+#define	SLMIOGSTAT	0xa100
+#define	SLMIOGPSIZE	0xa101
+#define	SLMIOGMFEED	0xa102
+
+#define	SLMIORESET	0xa140
+
+#define	SLMIOSPSIZE	0xa181
+#define	SLMIOSMFEED	0xa182
+
+/* Status returning structure (SLMIOGSTAT) */
+struct SLM_status {
+	int		stat;		/* numeric status code */
+	char	str[40];	/* status string */
+};
+
+/* Paper size structure (SLMIO[GS]PSIZE) */
+struct SLM_paper_size {
+	int		width;
+	int		height;
+};
+
+#endif /* _ATARI_SLM_H */
diff --git a/include/asm-m68k/atari_acsi.h b/include/asm-m68k/atari_acsi.h
new file mode 100644
index 000000000000..10fea68f191a
--- /dev/null
+++ b/include/asm-m68k/atari_acsi.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_ATARI_ACSI_H
+#define _ASM_ATARI_ACSI_H
+
+/* Functions exported by drivers/block/acsi.c */
+
+void acsi_delay_start( void );
+void acsi_delay_end( long usec );
+int acsi_wait_for_IRQ( unsigned timeout );
+int acsi_wait_for_noIRQ( unsigned timeout );
+int acsicmd_nodma( const char *cmd, int enable);
+int acsi_getstatus( void );
+int acsi_extstatus( char *buffer, int cnt );
+void acsi_end_extstatus( void );
+int acsi_extcmd( unsigned char *buffer, int cnt );
+
+/* The ACSI buffer is guarantueed to reside in ST-RAM and may be used by other
+ * drivers that work on the ACSI bus, too. It's data are valid only as long as
+ * the ST-DMA is locked. */
+extern char *acsi_buffer;
+extern unsigned long phys_acsi_buffer;
+
+/* Utility macros */
+
+/* Send one data byte over the bus and set mode for next operation
+ * with one move.l -- Atari recommends this...
+ */
+
+#define DMA_LONG_WRITE(data,mode)							\
+    do {													\
+		*((unsigned long *)&dma_wd.fdc_acces_seccount) =	\
+			((data)<<16) | (mode);							\
+	} while(0)
+
+#define ENABLE_IRQ()	atari_turnon_irq( IRQ_MFP_ACSI )
+#define DISABLE_IRQ()	atari_turnoff_irq( IRQ_MFP_ACSI )
+
+#endif /* _ASM_ATARI_ACSI_H */
diff --git a/include/asm-m68k/atari_joystick.h b/include/asm-m68k/atari_joystick.h
new file mode 100644
index 000000000000..93be7da9f2c7
--- /dev/null
+++ b/include/asm-m68k/atari_joystick.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_ATARI_JOYSTICK_H
+#define _LINUX_ATARI_JOYSTICK_H
+
+/*
+ * linux/include/linux/atari_joystick.h
+ * header file for Atari Joystick driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+void atari_joystick_interrupt(char*);
+int atari_joystick_init(void);
+extern int atari_mouse_buttons;
+
+struct joystick_status {
+	char		fire;
+	char		dir;
+	int		ready;
+	int		active;
+	wait_queue_head_t wait;
+};
+
+#endif
diff --git a/include/asm-m68k/atari_stdma.h b/include/asm-m68k/atari_stdma.h
new file mode 100644
index 000000000000..64f92880ce43
--- /dev/null
+++ b/include/asm-m68k/atari_stdma.h
@@ -0,0 +1,23 @@
+
+#ifndef _atari_stdma_h
+#define _atari_stdma_h
+
+
+#include <asm/irq.h>
+
+
+/***************************** Prototypes *****************************/
+
+void stdma_lock(irqreturn_t (*handler)(int, void *, struct pt_regs *),
+		void *data);
+void stdma_release( void );
+int stdma_others_waiting( void );
+int stdma_islocked( void );
+void *stdma_locked_by( void );
+void stdma_init( void );
+
+/************************* End of Prototypes **************************/
+
+
+
+#endif  /* _atari_stdma_h */
diff --git a/include/asm-m68k/atari_stram.h b/include/asm-m68k/atari_stram.h
new file mode 100644
index 000000000000..7546d13963be
--- /dev/null
+++ b/include/asm-m68k/atari_stram.h
@@ -0,0 +1,17 @@
+#ifndef _M68K_ATARI_STRAM_H
+#define _M68K_ATARI_STRAM_H
+
+/*
+ * Functions for Atari ST-RAM management
+ */
+
+/* public interface */
+void *atari_stram_alloc(long size, const char *owner);
+void atari_stram_free(void *);
+
+/* functions called internally by other parts of the kernel */
+void atari_stram_init(void);
+void atari_stram_reserve_pages(void *start_mem);
+void atari_stram_mem_init_hook (void);
+
+#endif /*_M68K_ATARI_STRAM_H */
diff --git a/include/asm-m68k/atarihw.h b/include/asm-m68k/atarihw.h
new file mode 100644
index 000000000000..f28acd0fd689
--- /dev/null
+++ b/include/asm-m68k/atarihw.h
@@ -0,0 +1,808 @@
+/*
+** linux/atarihw.h -- This header defines some macros and pointers for
+**                    the various Atari custom hardware registers.
+**
+** Copyright 1994 by Bj”rn Brauel
+**
+** 5/1/94 Roman Hodek:
+**   Added definitions for TT specific chips.
+**
+** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
+**   Finally added definitions for the matrix/codec and the DSP56001 host
+**   interface.
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIHW_H_
+#define _LINUX_ATARIHW_H_
+
+#include <linux/types.h>
+#include <asm/bootinfo.h>
+#include <asm/raw_io.h>
+
+extern u_long atari_mch_cookie;
+extern u_long atari_mch_type;
+extern u_long atari_switches;
+extern int atari_rtc_year_offset;
+extern int atari_dont_touch_floppy_select;
+
+/* convenience macros for testing machine type */
+#define MACH_IS_ST	((atari_mch_cookie >> 16) == ATARI_MCH_ST)
+#define MACH_IS_STE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+			 (atari_mch_cookie & 0xffff) == 0)
+#define MACH_IS_MSTE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+			 (atari_mch_cookie & 0xffff) == 0x10)
+#define MACH_IS_TT	((atari_mch_cookie >> 16) == ATARI_MCH_TT)
+#define MACH_IS_FALCON	((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
+#define MACH_IS_MEDUSA	(atari_mch_type == ATARI_MACH_MEDUSA)
+#define MACH_IS_HADES	(atari_mch_type == ATARI_MACH_HADES)
+#define MACH_IS_AB40	(atari_mch_type == ATARI_MACH_AB40)
+
+/* values for atari_switches */
+#define ATARI_SWITCH_IKBD	0x01
+#define ATARI_SWITCH_MIDI	0x02
+#define ATARI_SWITCH_SND6	0x04
+#define ATARI_SWITCH_SND7	0x08
+#define ATARI_SWITCH_OVSC_SHIFT	16
+#define ATARI_SWITCH_OVSC_IKBD	(ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MIDI	(ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND6	(ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND7	(ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MASK	0xffff0000
+
+/*
+ * Define several Hardware-Chips for indication so that for the ATARI we do
+ * no longer decide whether it is a Falcon or other machine . It's just
+ * important what hardware the machine uses
+ */
+
+/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
+
+#define ATARIHW_DECLARE(name)	unsigned name : 1
+#define ATARIHW_SET(name)	(atari_hw_present.name = 1)
+#define ATARIHW_PRESENT(name)	(atari_hw_present.name)
+
+struct atari_hw_present {
+    /* video hardware */
+    ATARIHW_DECLARE(STND_SHIFTER);	/* ST-Shifter - no base low ! */
+    ATARIHW_DECLARE(EXTD_SHIFTER);	/* STe-Shifter - 24 bit address */
+    ATARIHW_DECLARE(TT_SHIFTER);	/* TT-Shifter */
+    ATARIHW_DECLARE(VIDEL_SHIFTER);	/* Falcon-Shifter */
+    /* sound hardware */
+    ATARIHW_DECLARE(YM_2149);		/* Yamaha YM 2149 */
+    ATARIHW_DECLARE(PCM_8BIT);		/* PCM-Sound in STe-ATARI */
+    ATARIHW_DECLARE(CODEC);		/* CODEC Sound (Falcon) */
+    /* disk storage interfaces */
+    ATARIHW_DECLARE(TT_SCSI);		/* Directly mapped NCR5380 */
+    ATARIHW_DECLARE(ST_SCSI);		/* NCR5380 via ST-DMA (Falcon) */
+    ATARIHW_DECLARE(ACSI);		/* Standard ACSI like in STs */
+    ATARIHW_DECLARE(IDE);		/* IDE Interface */
+    ATARIHW_DECLARE(FDCSPEED);		/* 8/16 MHz switch for FDC */
+    /* other I/O hardware */
+    ATARIHW_DECLARE(ST_MFP);		/* The ST-MFP (there should be no Atari
+					   without it... but who knows?) */
+    ATARIHW_DECLARE(TT_MFP);		/* 2nd MFP */
+    ATARIHW_DECLARE(SCC);		/* Serial Communications Contr. */
+    ATARIHW_DECLARE(ST_ESCC);		/* SCC Z83230 in an ST */
+    ATARIHW_DECLARE(ANALOG_JOY);	/* Paddle Interface for STe
+					   and Falcon */
+    ATARIHW_DECLARE(MICROWIRE);		/* Microwire Interface */
+    /* DMA */
+    ATARIHW_DECLARE(STND_DMA);		/* 24 Bit limited ST-DMA */
+    ATARIHW_DECLARE(EXTD_DMA);		/* 32 Bit ST-DMA */
+    ATARIHW_DECLARE(SCSI_DMA);		/* DMA for the NCR5380 */
+    ATARIHW_DECLARE(SCC_DMA);		/* DMA for the SCC */
+    /* real time clocks */
+    ATARIHW_DECLARE(TT_CLK);		/* TT compatible clock chip */
+    ATARIHW_DECLARE(MSTE_CLK);		/* Mega ST(E) clock chip */
+    /* supporting hardware */
+    ATARIHW_DECLARE(SCU);		/* System Control Unit */
+    ATARIHW_DECLARE(BLITTER);		/* Blitter */
+    ATARIHW_DECLARE(VME);		/* VME Bus */
+    ATARIHW_DECLARE(DSP56K);		/* DSP56k processor in Falcon */
+};
+
+extern struct atari_hw_present atari_hw_present;
+
+
+/* Reading the MFP port register gives a machine independent delay, since the
+ * MFP always has a 8 MHz clock. This avoids problems with the varying length
+ * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
+ */
+#define	MFPDELAY() \
+	__asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+
+/* Do cache push/invalidate for DMA read/write. This function obeys the
+ * snooping on some machines (Medusa) and processors: The Medusa itself can
+ * snoop, but only the '040 can source data from its cache to DMA writes i.e.,
+ * reads from memory). Both '040 and '060 invalidate cache entries on snooped
+ * DMA reads (i.e., writes to memory).
+ */
+
+
+#define atari_readb   raw_inb
+#define atari_writeb  raw_outb
+
+#define atari_inb_p   raw_inb
+#define atari_outb_p  raw_outb
+
+
+
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+
+static inline void dma_cache_maintenance( unsigned long paddr,
+					  unsigned long len,
+					  int writeflag )
+
+{
+	if (writeflag) {
+		if (!MACH_IS_MEDUSA || CPU_IS_060)
+			cache_push( paddr, len );
+	}
+	else {
+		if (!MACH_IS_MEDUSA)
+			cache_clear( paddr, len );
+	}
+}
+
+
+/*
+** Shifter
+ */
+#define ST_LOW  0
+#define ST_MID  1
+#define ST_HIGH 2
+#define TT_LOW  7
+#define TT_MID  4
+#define TT_HIGH 6
+
+#define SHF_BAS (0xffff8200)
+struct SHIFTER
+ {
+	u_char pad1;
+	u_char bas_hi;
+	u_char pad2;
+	u_char bas_md;
+	u_char pad3;
+	u_char volatile vcounthi;
+	u_char pad4;
+	u_char volatile vcountmid;
+	u_char pad5;
+	u_char volatile vcountlow;
+	u_char volatile syncmode;
+	u_char pad6;
+	u_char pad7;
+	u_char bas_lo;
+ };
+# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
+
+#define SHF_FBAS (0xffff820e)
+struct SHIFTER_F030
+ {
+  u_short off_next;
+  u_short scn_width;
+ };
+# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
+
+
+#define	SHF_TBAS (0xffff8200)
+struct SHIFTER_TT {
+	u_char	char_dummy0;
+	u_char	bas_hi;			/* video mem base addr, high and mid byte */
+	u_char	char_dummy1;
+	u_char	bas_md;
+	u_char	char_dummy2;
+	u_char	vcount_hi;		/* pointer to currently displayed byte */
+	u_char	char_dummy3;
+	u_char	vcount_md;
+	u_char	char_dummy4;
+	u_char	vcount_lo;
+	u_short	st_sync;		/* ST compatible sync mode register, unused */
+	u_char	char_dummy5;
+	u_char	bas_lo;			/* video mem addr, low byte */
+	u_char	char_dummy6[2+3*16];
+	/* $ffff8240: */
+	u_short	color_reg[16];	/* 16 color registers */
+	u_char	st_shiftmode;	/* ST compatible shift mode register, unused */
+	u_char  char_dummy7;
+	u_short tt_shiftmode;	/* TT shift mode register */
+
+
+};
+#define	shifter_tt	((*(volatile struct SHIFTER_TT *)SHF_TBAS))
+
+/* values for shifter_tt->tt_shiftmode */
+#define	TT_SHIFTER_STLOW		0x0000
+#define	TT_SHIFTER_STMID		0x0100
+#define	TT_SHIFTER_STHIGH		0x0200
+#define	TT_SHIFTER_TTLOW		0x0700
+#define	TT_SHIFTER_TTMID		0x0400
+#define	TT_SHIFTER_TTHIGH		0x0600
+#define	TT_SHIFTER_MODEMASK	0x0700
+#define TT_SHIFTER_NUMMODE	0x0008
+#define	TT_SHIFTER_PALETTE_MASK	0x000f
+#define	TT_SHIFTER_GRAYMODE		0x1000
+
+/* 256 TT palette registers */
+#define	TT_PALETTE_BASE	(0xffff8400)
+#define	tt_palette	((volatile u_short *)TT_PALETTE_BASE)
+
+#define	TT_PALETTE_RED_MASK		0x0f00
+#define	TT_PALETTE_GREEN_MASK	0x00f0
+#define	TT_PALETTE_BLUE_MASK	0x000f
+
+/*
+** Falcon030 VIDEL Video Controller
+** for description see File 'linux\tools\atari\hardware.txt
+ */
+#define f030_col ((u_long *)		0xffff9800)
+#define f030_xreg ((u_short*)		0xffff8282)
+#define f030_yreg ((u_short*)		0xffff82a2)
+#define f030_creg ((u_short*)		0xffff82c0)
+#define f030_sreg ((u_short*)		0xffff8260)
+#define f030_mreg ((u_short*)		0xffff820a)
+#define f030_linewidth ((u_short*)      0xffff820e)
+#define f030_hscroll ((u_char*)		0xffff8265)
+
+#define VIDEL_BAS (0xffff8260)
+struct VIDEL {
+	u_short st_shift;
+	u_short pad1;
+	u_char  xoffset_s;
+	u_char  xoffset;
+	u_short f_shift;
+	u_char  pad2[0x1a];
+	u_short hht;
+	u_short hbb;
+	u_short hbe;
+	u_short hdb;
+	u_short hde;
+	u_short hss;
+	u_char  pad3[0x14];
+	u_short vft;
+	u_short vbb;
+	u_short vbe;
+	u_short vdb;
+	u_short vde;
+	u_short vss;
+	u_char  pad4[0x12];
+	u_short control;
+	u_short mode;
+};
+#define	videl	((*(volatile struct VIDEL *)VIDEL_BAS))
+
+/*
+** DMA/WD1772 Disk Controller
+ */
+
+#define FWD_BAS (0xffff8604)
+struct DMA_WD
+ {
+  u_short fdc_acces_seccount;
+  u_short dma_mode_status;
+  u_char dma_vhi;	/* Some extended ST-DMAs can handle 32 bit addresses */
+  u_char dma_hi;
+  u_char char_dummy2;
+  u_char dma_md;
+  u_char char_dummy3;
+  u_char dma_lo;
+  u_short fdc_speed;
+ };
+# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
+/* alias */
+#define	st_dma dma_wd
+/* The two highest bytes of an extended DMA as a short; this is a must
+ * for the Medusa.
+ */
+#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
+
+/*
+** YM2149 Sound Chip
+** access in bytes
+ */
+
+#define YM_BAS (0xffff8800)
+struct SOUND_YM
+ {
+  u_char rd_data_reg_sel;
+  u_char char_dummy1;
+  u_char wd_data;
+ };
+#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
+
+/* TT SCSI DMA */
+
+#define	TT_SCSI_DMA_BAS	(0xffff8700)
+struct TT_DMA {
+	u_char	char_dummy0;
+	u_char	dma_addr_hi;
+	u_char	char_dummy1;
+	u_char	dma_addr_hmd;
+	u_char	char_dummy2;
+	u_char	dma_addr_lmd;
+	u_char	char_dummy3;
+	u_char	dma_addr_lo;
+	u_char	char_dummy4;
+	u_char	dma_cnt_hi;
+	u_char	char_dummy5;
+	u_char	dma_cnt_hmd;
+	u_char	char_dummy6;
+	u_char	dma_cnt_lmd;
+	u_char	char_dummy7;
+	u_char	dma_cnt_lo;
+	u_long	dma_restdata;
+	u_short	dma_ctrl;
+};
+#define	tt_scsi_dma	((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
+
+/* TT SCSI Controller 5380 */
+
+#define	TT_5380_BAS	(0xffff8781)
+struct TT_5380 {
+	u_char	scsi_data;
+	u_char	char_dummy1;
+	u_char	scsi_icr;
+	u_char	char_dummy2;
+	u_char	scsi_mode;
+	u_char	char_dummy3;
+	u_char	scsi_tcr;
+	u_char	char_dummy4;
+	u_char	scsi_idstat;
+	u_char	char_dummy5;
+	u_char	scsi_dmastat;
+	u_char	char_dummy6;
+	u_char	scsi_targrcv;
+	u_char	char_dummy7;
+	u_char	scsi_inircv;
+};
+#define	tt_scsi			((*(volatile struct TT_5380 *)TT_5380_BAS))
+#define	tt_scsi_regp	((volatile char *)TT_5380_BAS)
+
+
+/*
+** Falcon DMA Sound Subsystem
+ */
+
+#define MATRIX_BASE (0xffff8930)
+struct MATRIX
+{
+  u_short source;
+  u_short destination;
+  u_char external_frequency_divider;
+  u_char internal_frequency_divider;
+};
+#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
+
+#define CODEC_BASE (0xffff8936)
+struct CODEC
+{
+  u_char tracks;
+  u_char input_source;
+#define CODEC_SOURCE_ADC        1
+#define CODEC_SOURCE_MATRIX     2
+  u_char adc_source;
+#define ADC_SOURCE_RIGHT_PSG    1
+#define ADC_SOURCE_LEFT_PSG     2
+  u_char gain;
+#define CODEC_GAIN_RIGHT        0x0f
+#define CODEC_GAIN_LEFT         0xf0
+  u_char attenuation;
+#define CODEC_ATTENUATION_RIGHT 0x0f
+#define CODEC_ATTENUATION_LEFT  0xf0
+  u_char unused1;
+  u_char status;
+#define CODEC_OVERFLOW_RIGHT    1
+#define CODEC_OVERFLOW_LEFT     2
+  u_char unused2, unused3, unused4, unused5;
+  u_char gpio_directions;
+#define GPIO_IN                 0
+#define GPIO_OUT                1
+  u_char unused6;
+  u_char gpio_data;
+};
+#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
+
+/*
+** Falcon Blitter
+*/
+
+#define BLT_BAS (0xffff8a00)
+
+struct BLITTER
+ {
+  u_short halftone[16];
+  u_short src_x_inc;
+  u_short src_y_inc;
+  u_long src_address;
+  u_short endmask1;
+  u_short endmask2;
+  u_short endmask3;
+  u_short dst_x_inc;
+  u_short dst_y_inc;
+  u_long dst_address;
+  u_short wd_per_line;
+  u_short ln_per_bb;
+  u_short hlf_op_reg;
+  u_short log_op_reg;
+  u_short lin_nm_reg;
+  u_short skew_reg;
+ };
+# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
+
+
+/*
+** SCC Z8530
+ */
+
+#define SCC_BAS (0xffff8c81)
+struct SCC
+ {
+  u_char cha_a_ctrl;
+  u_char char_dummy1;
+  u_char cha_a_data;
+  u_char char_dummy2;
+  u_char cha_b_ctrl;
+  u_char char_dummy3;
+  u_char cha_b_data;
+ };
+# define scc ((*(volatile struct SCC*)SCC_BAS))
+
+/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
+# define st_escc ((*(volatile struct SCC*)0xfffffa31))
+# define st_escc_dsr ((*(volatile char *)0xfffffa39))
+
+/* TT SCC DMA Controller (same chip as SCSI DMA) */
+
+#define	TT_SCC_DMA_BAS	(0xffff8c00)
+#define	tt_scc_dma	((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
+
+/*
+** VIDEL Palette Register
+ */
+
+#define FPL_BAS (0xffff9800)
+struct VIDEL_PALETTE
+ {
+  u_long reg[256];
+ };
+# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
+
+
+/*
+** Falcon DSP Host Interface
+ */
+
+#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
+struct DSP56K_HOST_INTERFACE {
+  u_char icr;
+#define DSP56K_ICR_RREQ	0x01
+#define DSP56K_ICR_TREQ	0x02
+#define DSP56K_ICR_HF0	0x08
+#define DSP56K_ICR_HF1	0x10
+#define DSP56K_ICR_HM0	0x20
+#define DSP56K_ICR_HM1	0x40
+#define DSP56K_ICR_INIT	0x80
+
+  u_char cvr;
+#define DSP56K_CVR_HV_MASK 0x1f
+#define DSP56K_CVR_HC	0x80
+
+  u_char isr;
+#define DSP56K_ISR_RXDF	0x01
+#define DSP56K_ISR_TXDE	0x02
+#define DSP56K_ISR_TRDY	0x04
+#define DSP56K_ISR_HF2	0x08
+#define DSP56K_ISR_HF3	0x10
+#define DSP56K_ISR_DMA	0x40
+#define DSP56K_ISR_HREQ	0x80
+
+  u_char ivr;
+
+  union {
+    u_char b[4];
+    u_short w[2];
+    u_long l;
+  } data;
+};
+#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
+
+/*
+** MFP 68901
+ */
+
+#define MFP_BAS (0xfffffa01)
+struct MFP
+ {
+  u_char par_dt_reg;
+  u_char char_dummy1;
+  u_char active_edge;
+  u_char char_dummy2;
+  u_char data_dir;
+  u_char char_dummy3;
+  u_char int_en_a;
+  u_char char_dummy4;
+  u_char int_en_b;
+  u_char char_dummy5;
+  u_char int_pn_a;
+  u_char char_dummy6;
+  u_char int_pn_b;
+  u_char char_dummy7;
+  u_char int_sv_a;
+  u_char char_dummy8;
+  u_char int_sv_b;
+  u_char char_dummy9;
+  u_char int_mk_a;
+  u_char char_dummy10;
+  u_char int_mk_b;
+  u_char char_dummy11;
+  u_char vec_adr;
+  u_char char_dummy12;
+  u_char tim_ct_a;
+  u_char char_dummy13;
+  u_char tim_ct_b;
+  u_char char_dummy14;
+  u_char tim_ct_cd;
+  u_char char_dummy15;
+  u_char tim_dt_a;
+  u_char char_dummy16;
+  u_char tim_dt_b;
+  u_char char_dummy17;
+  u_char tim_dt_c;
+  u_char char_dummy18;
+  u_char tim_dt_d;
+  u_char char_dummy19;
+  u_char sync_char;
+  u_char char_dummy20;
+  u_char usart_ctr;
+  u_char char_dummy21;
+  u_char rcv_stat;
+  u_char char_dummy22;
+  u_char trn_stat;
+  u_char char_dummy23;
+  u_char usart_dta;
+ };
+# define mfp ((*(volatile struct MFP*)MFP_BAS))
+
+/* TT's second MFP */
+
+#define	TT_MFP_BAS	(0xfffffa81)
+# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
+
+
+/* TT System Control Unit */
+
+#define	TT_SCU_BAS	(0xffff8e01)
+struct TT_SCU {
+	u_char	sys_mask;
+	u_char	char_dummy1;
+	u_char	sys_stat;
+	u_char	char_dummy2;
+	u_char	softint;
+	u_char	char_dummy3;
+	u_char	vmeint;
+	u_char	char_dummy4;
+	u_char	gp_reg1;
+	u_char	char_dummy5;
+	u_char	gp_reg2;
+	u_char	char_dummy6;
+	u_char	vme_mask;
+	u_char	char_dummy7;
+	u_char	vme_stat;
+};
+#define	tt_scu	((*(volatile struct TT_SCU *)TT_SCU_BAS))
+
+/* TT real time clock */
+
+#define	TT_RTC_BAS	(0xffff8961)
+struct TT_RTC {
+	u_char	regsel;
+	u_char	dummy;
+	u_char	data;
+};
+#define	tt_rtc	((*(volatile struct TT_RTC *)TT_RTC_BAS))
+
+
+/*
+** ACIA 6850
+ */
+/* constants for the ACIA registers */
+
+/* baudrate selection and reset (Baudrate = clock/factor) */
+#define ACIA_DIV1  0
+#define ACIA_DIV16 1
+#define ACIA_DIV64 2
+#define ACIA_RESET 3
+
+/* character format */
+#define ACIA_D7E2S (0<<2)	/* 7 data, even parity, 2 stop */
+#define ACIA_D7O2S (1<<2)	/* 7 data, odd parity, 2 stop */
+#define ACIA_D7E1S (2<<2)	/* 7 data, even parity, 1 stop */
+#define ACIA_D7O1S (3<<2)	/* 7 data, odd parity, 1 stop */
+#define ACIA_D8N2S (4<<2)	/* 8 data, no parity, 2 stop */
+#define ACIA_D8N1S (5<<2)	/* 8 data, no parity, 1 stop */
+#define ACIA_D8E1S (6<<2)	/* 8 data, even parity, 1 stop */
+#define ACIA_D8O1S (7<<2)	/* 8 data, odd parity, 1 stop */
+
+/* transmit control */
+#define ACIA_RLTID (0<<5)	/* RTS low, TxINT disabled */
+#define ACIA_RLTIE (1<<5)	/* RTS low, TxINT enabled */
+#define ACIA_RHTID (2<<5)	/* RTS high, TxINT disabled */
+#define ACIA_RLTIDSB (3<<5)	/* RTS low, TxINT disabled, send break */
+
+/* receive control */
+#define ACIA_RID (0<<7)		/* RxINT disabled */
+#define ACIA_RIE (1<<7)		/* RxINT enabled */
+
+/* status fields of the ACIA */
+#define ACIA_RDRF 1		/* Receive Data Register Full */
+#define ACIA_TDRE (1<<1)	/* Transmit Data Register Empty */
+#define ACIA_DCD  (1<<2)	/* Data Carrier Detect */
+#define ACIA_CTS  (1<<3)	/* Clear To Send */
+#define ACIA_FE   (1<<4)	/* Framing Error */
+#define ACIA_OVRN (1<<5)	/* Receiver Overrun */
+#define ACIA_PE   (1<<6)	/* Parity Error */
+#define ACIA_IRQ  (1<<7)	/* Interrupt Request */
+
+#define ACIA_BAS (0xfffffc00)
+struct ACIA
+ {
+  u_char key_ctrl;
+  u_char char_dummy1;
+  u_char key_data;
+  u_char char_dummy2;
+  u_char mid_ctrl;
+  u_char char_dummy3;
+  u_char mid_data;
+ };
+# define acia ((*(volatile struct ACIA*)ACIA_BAS))
+
+#define	TT_DMASND_BAS (0xffff8900)
+struct TT_DMASND {
+	u_char	int_ctrl;	/* Falcon: Interrupt control */
+	u_char	ctrl;
+	u_char	pad2;
+	u_char	bas_hi;
+	u_char	pad3;
+	u_char	bas_mid;
+	u_char	pad4;
+	u_char	bas_low;
+	u_char	pad5;
+	u_char	addr_hi;
+	u_char	pad6;
+	u_char	addr_mid;
+	u_char	pad7;
+	u_char	addr_low;
+	u_char	pad8;
+	u_char	end_hi;
+	u_char	pad9;
+	u_char	end_mid;
+	u_char	pad10;
+	u_char	end_low;
+	u_char	pad11[12];
+	u_char	track_select;	/* Falcon */
+	u_char	mode;
+	u_char	pad12[14];
+	/* Falcon only: */
+	u_short	cbar_src;
+	u_short cbar_dst;
+	u_char	ext_div;
+	u_char	int_div;
+	u_char	rec_track_select;
+	u_char	dac_src;
+	u_char	adc_src;
+	u_char	input_gain;
+	u_short	output_atten;
+};
+# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
+
+#define DMASND_MFP_INT_REPLAY     0x01
+#define DMASND_MFP_INT_RECORD     0x02
+#define DMASND_TIMERA_INT_REPLAY  0x04
+#define DMASND_TIMERA_INT_RECORD  0x08
+
+#define	DMASND_CTRL_OFF		  0x00
+#define	DMASND_CTRL_ON		  0x01
+#define	DMASND_CTRL_REPEAT	  0x02
+#define DMASND_CTRL_RECORD_ON     0x10
+#define DMASND_CTRL_RECORD_OFF    0x00
+#define DMASND_CTRL_RECORD_REPEAT 0x20
+#define DMASND_CTRL_SELECT_REPLAY 0x00
+#define DMASND_CTRL_SELECT_RECORD 0x80
+#define	DMASND_MODE_MONO	  0x80
+#define	DMASND_MODE_STEREO	  0x00
+#define DMASND_MODE_8BIT	  0x00
+#define DMASND_MODE_16BIT	  0x40	/* Falcon only */
+#define	DMASND_MODE_6KHZ	  0x00	/* Falcon: mute */
+#define	DMASND_MODE_12KHZ	  0x01
+#define	DMASND_MODE_25KHZ	  0x02
+#define	DMASND_MODE_50KHZ	  0x03
+
+
+#define DMASNDSetBase(bufstart)						\
+    do {								\
+	tt_dmasnd.bas_hi  = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
+	tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
+	tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
+    } while( 0 )
+
+#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) +	\
+			(tt_dmasnd.addr_mid << 8) +	\
+			(tt_dmasnd.addr_low))
+
+#define DMASNDSetEnd(bufend)				\
+    do {						\
+	tt_dmasnd.end_hi  = (unsigned char)(((bufend) & 0xff0000) >> 16); \
+	tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
+	tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
+    } while( 0 )
+
+
+#define	TT_MICROWIRE_BAS	(0xffff8922)
+struct TT_MICROWIRE {
+	u_short	data;
+	u_short	mask;
+};
+# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
+
+#define	MW_LM1992_ADDR		0x0400
+
+#define	MW_LM1992_VOLUME(dB)	\
+    (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
+#define	MW_LM1992_BALLEFT(dB)	\
+    (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define	MW_LM1992_BALRIGHT(dB)	\
+    (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define	MW_LM1992_TREBLE(dB)	\
+    (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+#define	MW_LM1992_BASS(dB)	\
+    (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+
+#define	MW_LM1992_PSG_LOW	0x000
+#define	MW_LM1992_PSG_HIGH	0x001
+#define	MW_LM1992_PSG_OFF	0x002
+
+#define MSTE_RTC_BAS	(0xfffffc21)
+
+struct MSTE_RTC {
+	u_char sec_ones;
+	u_char dummy1;
+	u_char sec_tens;
+	u_char dummy2;
+	u_char min_ones;
+	u_char dummy3;
+	u_char min_tens;
+	u_char dummy4;
+	u_char hr_ones;
+	u_char dummy5;
+	u_char hr_tens;
+	u_char dummy6;
+	u_char weekday;
+	u_char dummy7;
+	u_char day_ones;
+	u_char dummy8;
+	u_char day_tens;
+	u_char dummy9;
+	u_char mon_ones;
+	u_char dummy10;
+	u_char mon_tens;
+	u_char dummy11;
+	u_char year_ones;
+	u_char dummy12;
+	u_char year_tens;
+	u_char dummy13;
+	u_char mode;
+	u_char dummy14;
+	u_char test;
+	u_char dummy15;
+	u_char reset;
+};
+
+#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
+
+#endif /* linux/atarihw.h */
+
diff --git a/include/asm-m68k/atariints.h b/include/asm-m68k/atariints.h
new file mode 100644
index 000000000000..42952c890593
--- /dev/null
+++ b/include/asm-m68k/atariints.h
@@ -0,0 +1,215 @@
+/*
+** atariints.h -- Atari Linux interrupt handling structs and prototypes
+**
+** Copyright 1994 by Bj”rn Brauel
+**
+** 5/2/94 Roman Hodek:
+**   TT interrupt definitions added.
+**
+** 12/02/96: (Roman)
+**   Adapted to new int handling scheme (see ataints.c); revised numbering
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIINTS_H_
+#define _LINUX_ATARIINTS_H_
+
+#include <asm/irq.h>
+#include <asm/atarihw.h>
+
+/*
+** Atari Interrupt sources.
+**
+*/
+
+#define STMFP_SOURCE_BASE  8
+#define TTMFP_SOURCE_BASE  24
+#define SCC_SOURCE_BASE    40
+#define VME_SOURCE_BASE    56
+#define VME_MAX_SOURCES    16
+
+#define NUM_ATARI_SOURCES   (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
+
+/* convert vector number to int source number */
+#define IRQ_VECTOR_TO_SOURCE(v)	((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
+
+/* convert irq_handler index to vector number */
+#define IRQ_SOURCE_TO_VECTOR(i)	((i) + ((i) < 8 ? 0x18 : (0x40-8)))
+
+/* interrupt service types */
+#define IRQ_TYPE_SLOW     0
+#define IRQ_TYPE_FAST     1
+#define IRQ_TYPE_PRIO     2
+
+#define	IRQ_SPURIOUS      (0)
+
+/* auto-vector interrupts */
+#define IRQ_AUTO_1        (1)
+#define IRQ_AUTO_2        (2)
+#define IRQ_AUTO_3        (3)
+#define IRQ_AUTO_4        (4)
+#define IRQ_AUTO_5        (5)
+#define IRQ_AUTO_6        (6)
+#define IRQ_AUTO_7        (7)
+
+/* ST-MFP interrupts */
+#define IRQ_MFP_BUSY      (8)
+#define IRQ_MFP_DCD       (9)
+#define IRQ_MFP_CTS	  (10)
+#define IRQ_MFP_GPU	  (11)
+#define IRQ_MFP_TIMD      (12)
+#define IRQ_MFP_TIMC	  (13)
+#define IRQ_MFP_ACIA	  (14)
+#define IRQ_MFP_FDC       (15)
+#define IRQ_MFP_ACSI      IRQ_MFP_FDC
+#define IRQ_MFP_FSCSI     IRQ_MFP_FDC
+#define IRQ_MFP_IDE       IRQ_MFP_FDC
+#define IRQ_MFP_TIMB      (16)
+#define IRQ_MFP_SERERR    (17)
+#define IRQ_MFP_SEREMPT   (18)
+#define IRQ_MFP_RECERR    (19)
+#define IRQ_MFP_RECFULL   (20)
+#define IRQ_MFP_TIMA      (21)
+#define IRQ_MFP_RI        (22)
+#define IRQ_MFP_MMD       (23)
+
+/* TT-MFP interrupts */
+#define IRQ_TT_MFP_IO0       (24)
+#define IRQ_TT_MFP_IO1       (25)
+#define IRQ_TT_MFP_SCC	     (26)
+#define IRQ_TT_MFP_RI	     (27)
+#define IRQ_TT_MFP_TIMD      (28)
+#define IRQ_TT_MFP_TIMC	     (29)
+#define IRQ_TT_MFP_DRVRDY    (30)
+#define IRQ_TT_MFP_SCSIDMA   (31)
+#define IRQ_TT_MFP_TIMB      (32)
+#define IRQ_TT_MFP_SERERR    (33)
+#define IRQ_TT_MFP_SEREMPT   (34)
+#define IRQ_TT_MFP_RECERR    (35)
+#define IRQ_TT_MFP_RECFULL   (36)
+#define IRQ_TT_MFP_TIMA      (37)
+#define IRQ_TT_MFP_RTC       (38)
+#define IRQ_TT_MFP_SCSI      (39)
+
+/* SCC interrupts */
+#define IRQ_SCCB_TX	     (40)
+#define IRQ_SCCB_STAT	     (42)
+#define IRQ_SCCB_RX	     (44)
+#define IRQ_SCCB_SPCOND	     (46)
+#define IRQ_SCCA_TX	     (48)
+#define IRQ_SCCA_STAT	     (50)
+#define IRQ_SCCA_RX	     (52)
+#define IRQ_SCCA_SPCOND	     (54)
+
+
+#define INT_CLK   24576	    /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246	    /* to make sched_time = 99.902... HZ */
+
+
+#define MFP_ENABLE	0
+#define MFP_PENDING	1
+#define MFP_SERVICE	2
+#define MFP_MASK	3
+
+/* Utility functions for setting/clearing bits in the interrupt registers of
+ * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
+ * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
+
+static inline int get_mfp_bit( unsigned irq, int type )
+
+{	unsigned char	mask, *reg;
+
+	mask = 1 << (irq & 7);
+	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+	return( *reg & mask );
+}
+
+static inline void set_mfp_bit( unsigned irq, int type )
+
+{	unsigned char	mask, *reg;
+
+	mask = 1 << (irq & 7);
+	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+	__asm__ __volatile__ ( "orb %0,%1"
+			      : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+static inline void clear_mfp_bit( unsigned irq, int type )
+
+{	unsigned char	mask, *reg;
+
+	mask = ~(1 << (irq & 7));
+	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+	if (type == MFP_PENDING || type == MFP_SERVICE)
+		__asm__ __volatile__ ( "moveb %0,%1"
+				      : : "di" (mask), "m" (*reg) : "memory" );
+	else
+		__asm__ __volatile__ ( "andb %0,%1"
+				      : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+/*
+ * {en,dis}able_irq have the usual semantics of temporary blocking the
+ * interrupt, but not loosing requests that happen between disabling and
+ * enabling. This is done with the MFP mask registers.
+ */
+
+static inline void atari_enable_irq( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+	set_mfp_bit( irq, MFP_MASK );
+}
+
+static inline void atari_disable_irq( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+	clear_mfp_bit( irq, MFP_MASK );
+}
+
+/*
+ * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
+ * "stored"
+ */
+
+static inline void atari_turnon_irq( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+	set_mfp_bit( irq, MFP_ENABLE );
+}
+
+static inline void atari_turnoff_irq( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+	clear_mfp_bit( irq, MFP_ENABLE );
+	clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline void atari_clear_pending_irq( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+	clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline int atari_irq_pending( unsigned irq )
+
+{
+	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
+	return( get_mfp_bit( irq, MFP_PENDING ) );
+}
+
+unsigned long atari_register_vme_int( void );
+void atari_unregister_vme_int( unsigned long );
+
+#endif /* linux/atariints.h */
diff --git a/include/asm-m68k/atarikb.h b/include/asm-m68k/atarikb.h
new file mode 100644
index 000000000000..18926058fde7
--- /dev/null
+++ b/include/asm-m68k/atarikb.h
@@ -0,0 +1,40 @@
+/*
+** atarikb.h -- This header contains the prototypes of functions of
+**              the intelligent keyboard of the Atari needed by the
+**              mouse and joystick drivers.
+**
+** Copyright 1994 by Robert de Vries
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 20 Feb 1994 by Robert de Vries
+*/
+
+#ifndef _LINUX_ATARIKB_H
+#define _LINUX_ATARIKB_H
+
+void ikbd_write(const char *, int);
+void ikbd_mouse_button_action(int mode);
+void ikbd_mouse_rel_pos(void);
+void ikbd_mouse_abs_pos(int xmax, int ymax);
+void ikbd_mouse_kbd_mode(int dx, int dy);
+void ikbd_mouse_thresh(int x, int y);
+void ikbd_mouse_scale(int x, int y);
+void ikbd_mouse_pos_get(int *x, int *y);
+void ikbd_mouse_pos_set(int x, int y);
+void ikbd_mouse_y0_bot(void);
+void ikbd_mouse_y0_top(void);
+void ikbd_mouse_disable(void);
+void ikbd_joystick_event_on(void);
+void ikbd_joystick_event_off(void);
+void ikbd_joystick_get_state(void);
+void ikbd_joystick_disable(void);
+
+/* Hook for MIDI serial driver */
+extern void (*atari_MIDI_interrupt_hook) (void);
+/* Hook for mouse driver */
+extern void (*atari_mouse_interrupt_hook) (char *);
+
+#endif /* _LINUX_ATARIKB_H */
diff --git a/include/asm-m68k/atomic.h b/include/asm-m68k/atomic.h
new file mode 100644
index 000000000000..38f3043e7fe1
--- /dev/null
+++ b/include/asm-m68k/atomic.h
@@ -0,0 +1,148 @@
+#ifndef __ARCH_M68K_ATOMIC__
+#define __ARCH_M68K_ATOMIC__
+
+#include <linux/config.h>
+
+#include <asm/system.h>	/* local_irq_XXX() */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+#ifdef CONFIG_RMW_INSNS
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int t, tmp;
+
+	__asm__ __volatile__(
+			"1:	movel %2,%1\n"
+			"	addl %3,%1\n"
+			"	casl %2,%1,%0\n"
+			"	jne 1b"
+			: "+m" (*v), "=&d" (t), "=&d" (tmp)
+			: "g" (i), "2" (atomic_read(v)));
+	return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	int t, tmp;
+
+	__asm__ __volatile__(
+			"1:	movel %2,%1\n"
+			"	subl %3,%1\n"
+			"	casl %2,%1,%0\n"
+			"	jne 1b"
+			: "+m" (*v), "=&d" (t), "=&d" (tmp)
+			: "g" (i), "2" (atomic_read(v)));
+	return t;
+}
+#else /* !CONFIG_RMW_INSNS */
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long flags;
+	int t;
+
+	local_irq_save(flags);
+	t = atomic_read(v);
+	t += i;
+	atomic_set(v, t);
+	local_irq_restore(flags);
+
+	return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long flags;
+	int t;
+
+	local_irq_save(flags);
+	t = atomic_read(v);
+	t -= i;
+	atomic_set(v, t);
+	local_irq_restore(flags);
+
+	return t;
+}
+#endif /* !CONFIG_RMW_INSNS */
+
+#define atomic_dec_return(v)	atomic_sub_return(1, (v))
+#define atomic_inc_return(v)	atomic_add_return(1, (v))
+
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
+	return c != 0;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
+	return c != 0;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __ARCH_M68K_ATOMIC __ */
diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h
new file mode 100644
index 000000000000..b1bcf7c66516
--- /dev/null
+++ b/include/asm-m68k/bitops.h
@@ -0,0 +1,436 @@
+#ifndef _M68K_BITOPS_H
+#define _M68K_BITOPS_H
+/*
+ * Copyright 1992, Linus Torvalds.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/compiler.h>
+
+/*
+ * Require 68020 or better.
+ *
+ * They use the standard big-endian m680x0 bit ordering.
+ */
+
+#define test_and_set_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_set_bit(nr, vaddr) : \
+   __generic_test_and_set_bit(nr, vaddr))
+
+#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr)
+
+static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	char retval;
+
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+			: "=d" (retval), "+m" (*p)
+			: "di" (nr & 7));
+
+	return retval;
+}
+
+static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+	char retval;
+
+	__asm__ __volatile__ ("bfset %2{%1:#1}; sne %0"
+			: "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+	return retval;
+}
+
+#define set_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_set_bit(nr, vaddr) : \
+   __generic_set_bit(nr, vaddr))
+
+#define __set_bit(nr,vaddr) set_bit(nr,vaddr)
+
+static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	__asm__ __volatile__ ("bset %1,%0"
+			: "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr)
+{
+	__asm__ __volatile__ ("bfset %1{%0:#1}"
+			: : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_clear_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_clear_bit(nr, vaddr) : \
+   __generic_test_and_clear_bit(nr, vaddr))
+
+#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr)
+
+static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	char retval;
+
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+			: "=d" (retval), "+m" (*p)
+			: "di" (nr & 7));
+
+	return retval;
+}
+
+static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+	char retval;
+
+	__asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0"
+			: "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+	return retval;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#define clear_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_clear_bit(nr, vaddr) : \
+   __generic_clear_bit(nr, vaddr))
+#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr)
+
+static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	__asm__ __volatile__ ("bclr %1,%0"
+			: "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+	__asm__ __volatile__ ("bfclr %1{%0:#1}"
+			: : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_change_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_change_bit(nr, vaddr) : \
+   __generic_test_and_change_bit(nr, vaddr))
+
+#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr)
+#define __change_bit(nr,vaddr) change_bit(nr,vaddr)
+
+static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	char retval;
+
+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
+			: "=d" (retval), "+m" (*p)
+			: "di" (nr & 7));
+
+	return retval;
+}
+
+static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+	char retval;
+
+	__asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0"
+			: "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+	return retval;
+}
+
+#define change_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_change_bit(nr, vaddr) : \
+   __generic_change_bit(nr, vaddr))
+
+static inline void __constant_change_bit(int nr, unsigned long *vaddr)
+{
+	char *p = (char *)vaddr + (nr ^ 31) / 8;
+	__asm__ __volatile__ ("bchg %1,%0"
+			: "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_change_bit(int nr, unsigned long *vaddr)
+{
+	__asm__ __volatile__ ("bfchg %1{%0:#1}"
+			: : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+static inline int test_bit(int nr, const unsigned long *vaddr)
+{
+	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
+}
+
+static inline int find_first_zero_bit(const unsigned long *vaddr,
+				      unsigned size)
+{
+	const unsigned long *p = vaddr;
+	int res = 32;
+	unsigned long num;
+
+	if (!size)
+		return 0;
+
+	size = (size + 31) >> 5;
+	while (!(num = ~*p++)) {
+		if (!--size)
+			goto out;
+	}
+
+	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+			      : "=d" (res) : "d" (num & -num));
+	res ^= 31;
+out:
+	return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
+				     int offset)
+{
+	const unsigned long *p = vaddr + (offset >> 5);
+	int bit = offset & 31UL, res;
+
+	if (offset >= size)
+		return size;
+
+	if (bit) {
+		unsigned long num = ~*p++ & (~0UL << bit);
+		offset -= bit;
+
+		/* Look for zero in first longword */
+		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+				      : "=d" (res) : "d" (num & -num));
+		if (res < 32)
+			return offset + (res ^ 31);
+		offset += 32;
+	}
+	/* No zero yet, search remaining full bytes for a zero */
+	res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
+	return offset + res;
+}
+
+static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
+{
+	const unsigned long *p = vaddr;
+	int res = 32;
+	unsigned long num;
+
+	if (!size)
+		return 0;
+
+	size = (size + 31) >> 5;
+	while (!(num = *p++)) {
+		if (!--size)
+			goto out;
+	}
+
+	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+			      : "=d" (res) : "d" (num & -num));
+	res ^= 31;
+out:
+	return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_bit(const unsigned long *vaddr, int size,
+				int offset)
+{
+	const unsigned long *p = vaddr + (offset >> 5);
+	int bit = offset & 31UL, res;
+
+	if (offset >= size)
+		return size;
+
+	if (bit) {
+		unsigned long num = *p++ & (~0UL << bit);
+		offset -= bit;
+
+		/* Look for one in first longword */
+		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+				      : "=d" (res) : "d" (num & -num));
+		if (res < 32)
+			return offset + (res ^ 31);
+		offset += 32;
+	}
+	/* No one yet, search remaining full bytes for a one */
+	res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
+	return offset + res;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	int res;
+
+	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+			      : "=d" (res) : "d" (~word & -~word));
+	return res ^ 31;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+static inline int ffs(int x)
+{
+	int cnt;
+
+	asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x));
+
+	return 32 - cnt;
+}
+#define __ffs(x) (ffs(x) - 1)
+
+/*
+ * fls: find last bit set.
+ */
+
+static inline int fls(int x)
+{
+	int cnt;
+
+	asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x));
+
+	return 32 - cnt;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/* Bitmap functions for the minix filesystem */
+
+static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+	const unsigned short *p = vaddr, *addr = vaddr;
+	int res;
+	unsigned short num;
+
+	if (!size)
+		return 0;
+
+	size = (size >> 4) + ((size & 15) > 0);
+	while (*p++ == 0xffff)
+	{
+		if (--size == 0)
+			return (p - addr) << 4;
+	}
+
+	num = ~*--p;
+	__asm__ __volatile__ ("bfffo %1{#16,#16},%0"
+			      : "=d" (res) : "d" (num & -num));
+	return ((p - addr) << 4) + (res ^ 31);
+}
+
+#define minix_test_and_set_bit(nr, addr)	test_and_set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_set_bit(nr,addr)			set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr, addr)	test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr))
+
+static inline int minix_test_bit(int nr, const void *vaddr)
+{
+	const unsigned short *p = vaddr;
+	return (p[nr >> 4] & (1U << (nr & 15))) != 0;
+}
+
+/* Bitmap functions for the ext2 filesystem. */
+
+#define ext2_set_bit(nr, addr)			test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit(nr, addr)		test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+
+static inline int ext2_test_bit(int nr, const void *vaddr)
+{
+	const unsigned char *p = vaddr;
+	return (p[nr >> 3] & (1U << (nr & 7))) != 0;
+}
+
+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+	const unsigned long *p = vaddr, *addr = vaddr;
+	int res;
+
+	if (!size)
+		return 0;
+
+	size = (size >> 5) + ((size & 31) > 0);
+	while (*p++ == ~0UL)
+	{
+		if (--size == 0)
+			return (p - addr) << 5;
+	}
+
+	--p;
+	for (res = 0; res < 32; res++)
+		if (!ext2_test_bit (res, p))
+			break;
+	return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
+					  unsigned offset)
+{
+	const unsigned long *addr = vaddr;
+	const unsigned long *p = addr + (offset >> 5);
+	int bit = offset & 31UL, res;
+
+	if (offset >= size)
+		return size;
+
+	if (bit) {
+		/* Look for zero in first longword */
+		for (res = bit; res < 32; res++)
+			if (!ext2_test_bit (res, p))
+				return (p - addr) * 32 + res;
+		p++;
+	}
+	/* No zero yet, search remaining full bytes for a zero */
+	res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
+	return (p - addr) * 32 + res;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_BITOPS_H */
diff --git a/include/asm-m68k/blinken.h b/include/asm-m68k/blinken.h
new file mode 100644
index 000000000000..1a749cf7b06d
--- /dev/null
+++ b/include/asm-m68k/blinken.h
@@ -0,0 +1,32 @@
+/*
+** asm/blinken.h -- m68k blinkenlights support (currently hp300 only)
+**
+** (c) 1998 Phil Blundell <philb@gnu.org>
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _M68K_BLINKEN_H
+#define _M68K_BLINKEN_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+#define HP300_LEDS		0xf001ffff
+
+extern unsigned char ledstate;
+
+static __inline__ void blinken_leds(int on, int off)
+{
+	if (MACH_IS_HP300)
+	{
+		ledstate |= on;
+		ledstate &= ~off;
+		out_8(HP300_LEDS, ~ledstate);
+	}
+}
+
+#endif
diff --git a/include/asm-m68k/bootinfo.h b/include/asm-m68k/bootinfo.h
new file mode 100644
index 000000000000..fb8a06b9ab6a
--- /dev/null
+++ b/include/asm-m68k/bootinfo.h
@@ -0,0 +1,378 @@
+/*
+** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+**   Added bi_atari part of the machine dependent union bi_un; for now it
+**   contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+**   Renamed to setup.h; added some useful macros to allow gcc some
+**   optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+**   Redesign of the boot information structure; renamed to bootinfo.h again
+** 27/11/96 Geert Uytterhoeven:
+**   Backwards compatibility with bootinfo interface version 1.0
+*/
+
+#ifndef _M68K_BOOTINFO_H
+#define _M68K_BOOTINFO_H
+
+
+    /*
+     *  Bootinfo definitions
+     *
+     *  This is an easily parsable and extendable structure containing all
+     *  information to be passed from the bootstrap to the kernel.
+     *
+     *  This way I hope to keep all future changes back/forewards compatible.
+     *  Thus, keep your fingers crossed...
+     *
+     *  This structure is copied right after the kernel bss by the bootstrap
+     *  routine.
+     */
+
+#ifndef __ASSEMBLY__
+
+struct bi_record {
+    unsigned short tag;			/* tag ID */
+    unsigned short size;		/* size of record (in bytes) */
+    unsigned long data[0];		/* data */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+    /*
+     *  Tag Definitions
+     *
+     *  Machine independent tags start counting from 0x0000
+     *  Machine dependent tags start counting from 0x8000
+     */
+
+#define BI_LAST			0x0000	/* last record (sentinel) */
+#define BI_MACHTYPE		0x0001	/* machine type (u_long) */
+#define BI_CPUTYPE		0x0002	/* cpu type (u_long) */
+#define BI_FPUTYPE		0x0003	/* fpu type (u_long) */
+#define BI_MMUTYPE		0x0004	/* mmu type (u_long) */
+#define BI_MEMCHUNK		0x0005	/* memory chunk address and size */
+					/* (struct mem_info) */
+#define BI_RAMDISK		0x0006	/* ramdisk address and size */
+					/* (struct mem_info) */
+#define BI_COMMAND_LINE		0x0007	/* kernel command line parameters */
+					/* (string) */
+
+    /*
+     *  Amiga-specific tags
+     */
+
+#define BI_AMIGA_MODEL		0x8000	/* model (u_long) */
+#define BI_AMIGA_AUTOCON	0x8001	/* AutoConfig device */
+					/* (struct ConfigDev) */
+#define BI_AMIGA_CHIP_SIZE	0x8002	/* size of Chip RAM (u_long) */
+#define BI_AMIGA_VBLANK		0x8003	/* VBLANK frequency (u_char) */
+#define BI_AMIGA_PSFREQ		0x8004	/* power supply frequency (u_char) */
+#define BI_AMIGA_ECLOCK		0x8005	/* EClock frequency (u_long) */
+#define BI_AMIGA_CHIPSET	0x8006	/* native chipset present (u_long) */
+#define BI_AMIGA_SERPER		0x8007	/* serial port period (u_short) */
+
+    /*
+     *  Atari-specific tags
+     */
+
+#define BI_ATARI_MCH_COOKIE	0x8000	/* _MCH cookie from TOS (u_long) */
+#define BI_ATARI_MCH_TYPE	0x8001	/* special machine type (u_long) */
+					/* (values are ATARI_MACH_* defines */
+
+/* mch_cookie values (upper word) */
+#define ATARI_MCH_ST		0
+#define ATARI_MCH_STE		1
+#define ATARI_MCH_TT		2
+#define ATARI_MCH_FALCON	3
+
+/* mch_type values */
+#define ATARI_MACH_NORMAL	0	/* no special machine type */
+#define ATARI_MACH_MEDUSA	1	/* Medusa 040 */
+#define ATARI_MACH_HADES	2	/* Hades 040 or 060 */
+#define ATARI_MACH_AB40		3	/* Afterburner040 on Falcon */
+
+    /*
+     *  VME-specific tags
+     */
+
+#define BI_VME_TYPE		0x8000	/* VME sub-architecture (u_long) */
+#define BI_VME_BRDINFO		0x8001	/* VME board information (struct) */
+
+/* BI_VME_TYPE codes */
+#define	VME_TYPE_TP34V		0x0034	/* Tadpole TP34V */
+#define VME_TYPE_MVME147	0x0147	/* Motorola MVME147 */
+#define VME_TYPE_MVME162	0x0162	/* Motorola MVME162 */
+#define VME_TYPE_MVME166	0x0166	/* Motorola MVME166 */
+#define VME_TYPE_MVME167	0x0167	/* Motorola MVME167 */
+#define VME_TYPE_MVME172	0x0172	/* Motorola MVME172 */
+#define VME_TYPE_MVME177	0x0177	/* Motorola MVME177 */
+#define VME_TYPE_BVME4000	0x4000	/* BVM Ltd. BVME4000 */
+#define VME_TYPE_BVME6000	0x6000	/* BVM Ltd. BVME6000 */
+
+/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on
+ * Motorola VME boards.  Contains board number, Bug version, board
+ * configuration options, etc.  See include/asm/mvme16xhw.h for details.
+ */
+
+
+    /*
+     *  Macintosh-specific tags (all u_long)
+     */
+
+#define BI_MAC_MODEL		0x8000	/* Mac Gestalt ID (model type) */
+#define BI_MAC_VADDR		0x8001	/* Mac video base address */
+#define BI_MAC_VDEPTH		0x8002	/* Mac video depth */
+#define BI_MAC_VROW		0x8003	/* Mac video rowbytes */
+#define BI_MAC_VDIM		0x8004	/* Mac video dimensions */
+#define BI_MAC_VLOGICAL		0x8005	/* Mac video logical base */
+#define BI_MAC_SCCBASE		0x8006	/* Mac SCC base address */
+#define BI_MAC_BTIME		0x8007	/* Mac boot time */
+#define BI_MAC_GMTBIAS		0x8008	/* Mac GMT timezone offset */
+#define BI_MAC_MEMSIZE		0x8009	/* Mac RAM size (sanity check) */
+#define BI_MAC_CPUID		0x800a	/* Mac CPU type (sanity check) */
+#define BI_MAC_ROMBASE		0x800b	/* Mac system ROM base address */
+
+    /*
+     *  Macintosh hardware profile data - unused, see macintosh.h for
+     *  resonable type values
+     */
+
+#define BI_MAC_VIA1BASE		0x8010	/* Mac VIA1 base address (always present) */
+#define BI_MAC_VIA2BASE		0x8011	/* Mac VIA2 base address (type varies) */
+#define BI_MAC_VIA2TYPE		0x8012	/* Mac VIA2 type (VIA, RBV, OSS) */
+#define BI_MAC_ADBTYPE		0x8013	/* Mac ADB interface type */
+#define BI_MAC_ASCBASE		0x8014	/* Mac Apple Sound Chip base address */
+#define BI_MAC_SCSI5380		0x8015	/* Mac NCR 5380 SCSI (base address, multi) */
+#define BI_MAC_SCSIDMA		0x8016	/* Mac SCSI DMA (base address) */
+#define BI_MAC_SCSI5396		0x8017	/* Mac NCR 53C96 SCSI (base address, multi) */
+#define BI_MAC_IDETYPE		0x8018	/* Mac IDE interface type */
+#define BI_MAC_IDEBASE		0x8019	/* Mac IDE interface base address */
+#define BI_MAC_NUBUS		0x801a	/* Mac Nubus type (none, regular, pseudo) */
+#define BI_MAC_SLOTMASK		0x801b	/* Mac Nubus slots present */
+#define BI_MAC_SCCTYPE		0x801c	/* Mac SCC serial type (normal, IOP) */
+#define BI_MAC_ETHTYPE		0x801d	/* Mac builtin ethernet type (Sonic, MACE */
+#define BI_MAC_ETHBASE		0x801e	/* Mac builtin ethernet base address */
+#define BI_MAC_PMU		0x801f	/* Mac power management / poweroff hardware */
+#define BI_MAC_IOP_SWIM		0x8020	/* Mac SWIM floppy IOP */
+#define BI_MAC_IOP_ADB		0x8021	/* Mac ADB IOP */
+
+    /*
+     * Mac: compatibility with old booter data format (temporarily)
+     * Fields unused with the new bootinfo can be deleted now; instead of
+     * adding new fields the struct might be splitted into a hardware address
+     * part and a hardware type part
+     */
+
+#ifndef __ASSEMBLY__
+
+struct mac_booter_data
+{
+	unsigned long videoaddr;
+	unsigned long videorow;
+	unsigned long videodepth;
+	unsigned long dimensions;
+	unsigned long args;
+	unsigned long boottime;
+	unsigned long gmtbias;
+	unsigned long bootver;
+	unsigned long videological;
+	unsigned long sccbase;
+	unsigned long id;
+	unsigned long memsize;
+	unsigned long serialmf;
+	unsigned long serialhsk;
+	unsigned long serialgpi;
+	unsigned long printmf;
+	unsigned long printhsk;
+	unsigned long printgpi;
+	unsigned long cpuid;
+	unsigned long rombase;
+	unsigned long adbdelay;
+	unsigned long timedbra;
+};
+
+extern struct mac_booter_data
+	mac_bi_data;
+
+#endif
+
+    /*
+     *  Apollo-specific tags
+     */
+
+#define BI_APOLLO_MODEL         0x8000  /* model (u_long) */
+
+    /*
+     *  HP300-specific tags
+     */
+
+#define BI_HP300_MODEL		0x8000	/* model (u_long) */
+#define BI_HP300_UART_SCODE	0x8001	/* UART select code (u_long) */
+#define BI_HP300_UART_ADDR	0x8002	/* phys. addr of UART (u_long) */
+
+    /*
+     * Stuff for bootinfo interface versioning
+     *
+     * At the start of kernel code, a 'struct bootversion' is located.
+     * bootstrap checks for a matching version of the interface before booting
+     * a kernel, to avoid user confusion if kernel and bootstrap don't work
+     * together :-)
+     *
+     * If incompatible changes are made to the bootinfo interface, the major
+     * number below should be stepped (and the minor reset to 0) for the
+     * appropriate machine. If a change is backward-compatible, the minor
+     * should be stepped. "Backwards-compatible" means that booting will work,
+     * but certain features may not.
+     */
+
+#define BOOTINFOV_MAGIC			0x4249561A	/* 'BIV^Z' */
+#define MK_BI_VERSION(major,minor)	(((major)<<16)+(minor))
+#define BI_VERSION_MAJOR(v)		(((v) >> 16) & 0xffff)
+#define BI_VERSION_MINOR(v)		((v) & 0xffff)
+
+#ifndef __ASSEMBLY__
+
+struct bootversion {
+    unsigned short branch;
+    unsigned long magic;
+    struct {
+	unsigned long machtype;
+	unsigned long version;
+    } machversions[0];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AMIGA_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
+#define ATARI_BOOTI_VERSION    MK_BI_VERSION( 2, 1 )
+#define MAC_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
+#define MVME147_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
+#define MVME16x_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
+#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define Q40_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
+#define HP300_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
+
+#ifdef BOOTINFO_COMPAT_1_0
+
+    /*
+     *  Backwards compatibility with bootinfo interface version 1.0
+     */
+
+#define COMPAT_AMIGA_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
+#define COMPAT_ATARI_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
+#define COMPAT_MAC_BOOTI_VERSION      MK_BI_VERSION( 1, 0 )
+
+#include <linux/zorro.h>
+
+#define COMPAT_NUM_AUTO    16
+
+struct compat_bi_Amiga {
+    int model;
+    int num_autocon;
+    struct ConfigDev autocon[COMPAT_NUM_AUTO];
+    unsigned long chip_size;
+    unsigned char vblank;
+    unsigned char psfreq;
+    unsigned long eclock;
+    unsigned long chipset;
+    unsigned long hw_present;
+};
+
+struct compat_bi_Atari {
+    unsigned long hw_present;
+    unsigned long mch_cookie;
+};
+
+#ifndef __ASSEMBLY__
+
+struct compat_bi_Macintosh
+{
+	unsigned long videoaddr;
+	unsigned long videorow;
+	unsigned long videodepth;
+	unsigned long dimensions;
+	unsigned long args;
+	unsigned long boottime;
+	unsigned long gmtbias;
+	unsigned long bootver;
+	unsigned long videological;
+	unsigned long sccbase;
+	unsigned long id;
+	unsigned long memsize;
+	unsigned long serialmf;
+	unsigned long serialhsk;
+	unsigned long serialgpi;
+	unsigned long printmf;
+	unsigned long printhsk;
+	unsigned long printgpi;
+	unsigned long cpuid;
+	unsigned long rombase;
+	unsigned long adbdelay;
+	unsigned long timedbra;
+};
+
+#endif
+
+struct compat_mem_info {
+    unsigned long addr;
+    unsigned long size;
+};
+
+#define COMPAT_NUM_MEMINFO  4
+
+#define COMPAT_CPUB_68020 0
+#define COMPAT_CPUB_68030 1
+#define COMPAT_CPUB_68040 2
+#define COMPAT_CPUB_68060 3
+#define COMPAT_FPUB_68881 5
+#define COMPAT_FPUB_68882 6
+#define COMPAT_FPUB_68040 7
+#define COMPAT_FPUB_68060 8
+
+#define COMPAT_CPU_68020    (1<<COMPAT_CPUB_68020)
+#define COMPAT_CPU_68030    (1<<COMPAT_CPUB_68030)
+#define COMPAT_CPU_68040    (1<<COMPAT_CPUB_68040)
+#define COMPAT_CPU_68060    (1<<COMPAT_CPUB_68060)
+#define COMPAT_CPU_MASK     (31)
+#define COMPAT_FPU_68881    (1<<COMPAT_FPUB_68881)
+#define COMPAT_FPU_68882    (1<<COMPAT_FPUB_68882)
+#define COMPAT_FPU_68040    (1<<COMPAT_FPUB_68040)
+#define COMPAT_FPU_68060    (1<<COMPAT_FPUB_68060)
+#define COMPAT_FPU_MASK     (0xfe0)
+
+#define COMPAT_CL_SIZE      (256)
+
+struct compat_bootinfo {
+    unsigned long machtype;
+    unsigned long cputype;
+    struct compat_mem_info memory[COMPAT_NUM_MEMINFO];
+    int num_memory;
+    unsigned long ramdisk_size;
+    unsigned long ramdisk_addr;
+    char command_line[COMPAT_CL_SIZE];
+    union {
+	struct compat_bi_Amiga     bi_ami;
+	struct compat_bi_Atari     bi_ata;
+	struct compat_bi_Macintosh bi_mac;
+    } bi_un;
+};
+
+#define bi_amiga	bi_un.bi_ami
+#define bi_atari	bi_un.bi_ata
+#define bi_mac		bi_un.bi_mac
+
+#endif /* BOOTINFO_COMPAT_1_0 */
+
+
+#endif /* _M68K_BOOTINFO_H */
diff --git a/include/asm-m68k/bug.h b/include/asm-m68k/bug.h
new file mode 100644
index 000000000000..3e1d2266fa69
--- /dev/null
+++ b/include/asm-m68k/bug.h
@@ -0,0 +1,27 @@
+#ifndef _M68K_BUG_H
+#define _M68K_BUG_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#ifndef CONFIG_SUN3
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	asm volatile("illegal"); \
+} while (0)
+#else
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	panic("BUG!"); \
+} while (0)
+#endif
+#else
+#define BUG() do { \
+	asm volatile("illegal"); \
+} while (0)
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-m68k/bugs.h b/include/asm-m68k/bugs.h
new file mode 100644
index 000000000000..d01935592410
--- /dev/null
+++ b/include/asm-m68k/bugs.h
@@ -0,0 +1,14 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+extern void check_bugs(void);	/* in arch/m68k/kernel/setup.c */
diff --git a/include/asm-m68k/bvme6000hw.h b/include/asm-m68k/bvme6000hw.h
new file mode 100644
index 000000000000..28a859b03959
--- /dev/null
+++ b/include/asm-m68k/bvme6000hw.h
@@ -0,0 +1,150 @@
+#ifndef _M68K_BVME6000HW_H_
+#define _M68K_BVME6000HW_H_
+
+#include <asm/irq.h>
+
+/*
+ * PIT structure
+ */
+
+#define BVME_PIT_BASE	0xffa00000
+
+typedef struct {
+	unsigned char
+	pad_a[3], pgcr,
+	pad_b[3], psrr,
+	pad_c[3], paddr,
+	pad_d[3], pbddr,
+	pad_e[3], pcddr,
+	pad_f[3], pivr,
+	pad_g[3], pacr,
+	pad_h[3], pbcr,
+	pad_i[3], padr,
+	pad_j[3], pbdr,
+	pad_k[3], paar,
+	pad_l[3], pbar,
+	pad_m[3], pcdr,
+	pad_n[3], psr,
+	pad_o[3], res1,
+	pad_p[3], res2,
+	pad_q[3], tcr,
+	pad_r[3], tivr,
+	pad_s[3], res3,
+	pad_t[3], cprh,
+	pad_u[3], cprm,
+	pad_v[3], cprl,
+	pad_w[3], res4,
+	pad_x[3], crh,
+	pad_y[3], crm,
+	pad_z[3], crl,
+	pad_A[3], tsr,
+	pad_B[3], res5;
+} PitRegs_t, *PitRegsPtr;
+
+#define bvmepit   ((*(volatile PitRegsPtr)(BVME_PIT_BASE)))
+
+#define BVME_RTC_BASE	0xff900000
+
+typedef struct {
+	unsigned char
+	pad_a[3], msr,
+	pad_b[3], t0cr_rtmr,
+	pad_c[3], t1cr_omr,
+	pad_d[3], pfr_icr0,
+	pad_e[3], irr_icr1,
+	pad_f[3], bcd_tenms,
+	pad_g[3], bcd_sec,
+	pad_h[3], bcd_min,
+	pad_i[3], bcd_hr,
+	pad_j[3], bcd_dom,
+	pad_k[3], bcd_mth,
+	pad_l[3], bcd_year,
+	pad_m[3], bcd_ujcc,
+	pad_n[3], bcd_hjcc,
+	pad_o[3], bcd_dow,
+	pad_p[3], t0lsb,
+	pad_q[3], t0msb,
+	pad_r[3], t1lsb,
+	pad_s[3], t1msb,
+	pad_t[3], cmp_sec,
+	pad_u[3], cmp_min,
+	pad_v[3], cmp_hr,
+	pad_w[3], cmp_dom,
+	pad_x[3], cmp_mth,
+	pad_y[3], cmp_dow,
+	pad_z[3], sav_sec,
+	pad_A[3], sav_min,
+	pad_B[3], sav_hr,
+	pad_C[3], sav_dom,
+	pad_D[3], sav_mth,
+	pad_E[3], ram,
+	pad_F[3], test;
+} RtcRegs_t, *RtcPtr_t;
+
+
+#define BVME_I596_BASE	0xff100000
+
+#define BVME_ETHIRQ_REG	0xff20000b
+
+#define BVME_LOCAL_IRQ_STAT  0xff20000f
+
+#define BVME_ETHERR          0x02
+#define BVME_ABORT_STATUS    0x08
+
+#define BVME_NCR53C710_BASE	0xff000000
+
+#define BVME_SCC_A_ADDR	0xffb0000b
+#define BVME_SCC_B_ADDR	0xffb00003
+#define BVME_SCC_RTxC	7372800
+
+#define BVME_CONFIG_REG	0xff500003
+
+#define config_reg_ptr	(volatile unsigned char *)BVME_CONFIG_REG
+
+#define BVME_CONFIG_SW1	0x08
+#define BVME_CONFIG_SW2	0x04
+#define BVME_CONFIG_SW3	0x02
+#define BVME_CONFIG_SW4	0x01
+
+
+#define BVME_IRQ_TYPE_PRIO	0
+
+#define BVME_IRQ_PRN		0x54
+#define BVME_IRQ_I596		0x1a
+#define BVME_IRQ_SCSI		0x1b
+#define BVME_IRQ_TIMER		0x59
+#define BVME_IRQ_RTC		0x1e
+#define BVME_IRQ_ABORT		0x1f
+
+/* SCC interrupts */
+#define BVME_IRQ_SCC_BASE		0x40
+#define BVME_IRQ_SCCB_TX		0x40
+#define BVME_IRQ_SCCB_STAT		0x42
+#define BVME_IRQ_SCCB_RX		0x44
+#define BVME_IRQ_SCCB_SPCOND		0x46
+#define BVME_IRQ_SCCA_TX		0x48
+#define BVME_IRQ_SCCA_STAT		0x4a
+#define BVME_IRQ_SCCA_RX		0x4c
+#define BVME_IRQ_SCCA_SPCOND		0x4e
+
+/* Address control registers */
+
+#define BVME_ACR_A32VBA		0xff400003
+#define BVME_ACR_A32MSK		0xff410003
+#define BVME_ACR_A24VBA		0xff420003
+#define BVME_ACR_A24MSK		0xff430003
+#define BVME_ACR_A16VBA		0xff440003
+#define BVME_ACR_A32LBA		0xff450003
+#define BVME_ACR_A24LBA		0xff460003
+#define BVME_ACR_ADDRCTL	0xff470003
+
+#define bvme_acr_a32vba		*(volatile unsigned char *)BVME_ACR_A32VBA
+#define bvme_acr_a32msk		*(volatile unsigned char *)BVME_ACR_A32MSK
+#define bvme_acr_a24vba		*(volatile unsigned char *)BVME_ACR_A24VBA
+#define bvme_acr_a24msk		*(volatile unsigned char *)BVME_ACR_A24MSK
+#define bvme_acr_a16vba		*(volatile unsigned char *)BVME_ACR_A16VBA
+#define bvme_acr_a32lba		*(volatile unsigned char *)BVME_ACR_A32LBA
+#define bvme_acr_a24lba		*(volatile unsigned char *)BVME_ACR_A24LBA
+#define bvme_acr_addrctl	*(volatile unsigned char *)BVME_ACR_ADDRCTL
+
+#endif
diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h
new file mode 100644
index 000000000000..81d420b35c80
--- /dev/null
+++ b/include/asm-m68k/byteorder.h
@@ -0,0 +1,25 @@
+#ifndef _M68K_BYTEORDER_H
+#define _M68K_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
+{
+	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+	return val;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#endif
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68K_BYTEORDER_H */
diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h
new file mode 100644
index 000000000000..6161fd3d8600
--- /dev/null
+++ b/include/asm-m68k/cache.h
@@ -0,0 +1,13 @@
+/*
+ * include/asm-m68k/cache.h
+ */
+#ifndef __ARCH_M68K_CACHE_H
+#define __ARCH_M68K_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_SHIFT  4
+#define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 4	/* largest L1 which this arch supports */
+
+#endif
diff --git a/include/asm-m68k/cachectl.h b/include/asm-m68k/cachectl.h
new file mode 100644
index 000000000000..525978e959e3
--- /dev/null
+++ b/include/asm-m68k/cachectl.h
@@ -0,0 +1,14 @@
+#ifndef _M68K_CACHECTL_H
+#define _M68K_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define FLUSH_SCOPE_LINE    1	/* Flush a cache line */
+#define FLUSH_SCOPE_PAGE    2	/* Flush a page */
+#define FLUSH_SCOPE_ALL     3	/* Flush the whole cache -- superuser only */
+
+#define FLUSH_CACHE_DATA    1	/* Writeback and flush data cache */
+#define FLUSH_CACHE_INSN    2	/* Flush instruction cache */
+#define FLUSH_CACHE_BOTH    3	/* Flush both caches */
+
+#endif /* _M68K_CACHECTL_H */
diff --git a/include/asm-m68k/cacheflush.h b/include/asm-m68k/cacheflush.h
new file mode 100644
index 000000000000..e4773946f10d
--- /dev/null
+++ b/include/asm-m68k/cacheflush.h
@@ -0,0 +1,149 @@
+#ifndef _M68K_CACHEFLUSH_H
+#define _M68K_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * Cache handling functions
+ */
+
+#define flush_icache()						\
+({								\
+	if (CPU_IS_040_OR_060)					\
+		__asm__ __volatile__("nop\n\t"			\
+				     ".chip 68040\n\t"		\
+				     "cinva %%ic\n\t"		\
+				     ".chip 68k" : );		\
+	else {							\
+		unsigned long _tmp;				\
+		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
+				     "orw %1,%0\n\t"		\
+				     "movec %0,%%cacr"		\
+				     : "=&d" (_tmp)		\
+				     : "id" (FLUSH_I));	\
+	}							\
+})
+
+/*
+ * invalidate the cache for the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_clear(unsigned long paddr, int len);
+/*
+ * push any dirty cache in the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_push(unsigned long paddr, int len);
+
+/*
+ * push and invalidate pages in the specified user virtual
+ * memory range.
+ */
+extern void cache_push_v(unsigned long vaddr, int len);
+
+/* cache code */
+#define FLUSH_I_AND_D	(0x00000808)
+#define FLUSH_I		(0x00000008)
+
+/* This is needed whenever the virtual mapping of the current
+   process changes.  */
+#define __flush_cache_all()					\
+({								\
+	if (CPU_IS_040_OR_060)					\
+		__asm__ __volatile__("nop\n\t"			\
+				     ".chip 68040\n\t"		\
+				     "cpusha %dc\n\t"		\
+				     ".chip 68k");		\
+	else {							\
+		unsigned long _tmp;				\
+		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
+				     "orw %1,%0\n\t"		\
+				     "movec %0,%%cacr"		\
+				     : "=&d" (_tmp)		\
+				     : "di" (FLUSH_I_AND_D));	\
+	}							\
+})
+
+#define __flush_cache_030()					\
+({								\
+	if (CPU_IS_020_OR_030) {				\
+		unsigned long _tmp;				\
+		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
+				     "orw %1,%0\n\t"		\
+				     "movec %0,%%cacr"		\
+				     : "=&d" (_tmp)		\
+				     : "di" (FLUSH_I_AND_D));	\
+	}							\
+})
+
+#define flush_cache_all() __flush_cache_all()
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (mm == current->mm)
+		__flush_cache_030();
+}
+
+/* flush_cache_range/flush_cache_page must be macros to avoid
+   a dependency on linux/mm.h, which includes this file... */
+static inline void flush_cache_range(struct vm_area_struct *vma,
+				     unsigned long start,
+				     unsigned long end)
+{
+	if (vma->vm_mm == current->mm)
+	        __flush_cache_030();
+}
+
+static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
+{
+	if (vma->vm_mm == current->mm)
+	        __flush_cache_030();
+}
+
+
+/* Push the page at kernel virtual address and clear the icache */
+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+static inline void __flush_page_to_ram(void *vaddr)
+{
+	if (CPU_IS_040_OR_060) {
+		__asm__ __volatile__("nop\n\t"
+				     ".chip 68040\n\t"
+				     "cpushp %%bc,(%0)\n\t"
+				     ".chip 68k"
+				     : : "a" (__pa(vaddr)));
+	} else {
+		unsigned long _tmp;
+		__asm__ __volatile__("movec %%cacr,%0\n\t"
+				     "orw %1,%0\n\t"
+				     "movec %0,%%cacr"
+				     : "=&d" (_tmp)
+				     : "di" (FLUSH_I));
+	}
+}
+
+#define flush_dcache_page(page)		__flush_page_to_ram(page_address(page))
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_page(vma, page)	__flush_page_to_ram(page_address(page))
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
+
+#endif /* _M68K_CACHEFLUSH_H */
diff --git a/include/asm-m68k/checksum.h b/include/asm-m68k/checksum.h
new file mode 100644
index 000000000000..78860c20db01
--- /dev/null
+++ b/include/asm-m68k/checksum.h
@@ -0,0 +1,150 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int csum_partial_copy_from_user(const unsigned char *src,
+						unsigned char *dst,
+						int len, int sum,
+						int *csum_err);
+
+extern unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+					      unsigned char *dst, int len,
+					      int sum);
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline unsigned short
+ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+	unsigned int sum = 0;
+	unsigned long tmp;
+
+	__asm__ ("subqw #1,%2\n"
+		 "1:\t"
+		 "movel %1@+,%3\n\t"
+		 "addxl %3,%0\n\t"
+		 "dbra  %2,1b\n\t"
+		 "movel %0,%3\n\t"
+		 "swap  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 "clrw  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+		 : "0" (sum), "1" (iph), "2" (ihl)
+		 : "memory");
+	return ~sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int tmp = sum;
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (tmp));
+	return ~sum;
+}
+
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	__asm__ ("addl  %2,%0\n\t"
+		 "addxl %3,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=d" (saddr)
+		 : "g" (daddr), "1" (saddr), "d" (len + proto),
+		   "0" (sum));
+	return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short
+ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
+		__u32 len, unsigned short proto, unsigned int sum)
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h
new file mode 100644
index 000000000000..1e233e7d191e
--- /dev/null
+++ b/include/asm-m68k/contregs.h
@@ -0,0 +1,4 @@
+#ifndef _M68K_CONTREGS_H
+#define _M68K_CONTREGS_H
+#include <asm-sparc/contregs.h>
+#endif /* _M68K_CONTREGS_H */
diff --git a/include/asm-m68k/cputime.h b/include/asm-m68k/cputime.h
new file mode 100644
index 000000000000..c79c5e892305
--- /dev/null
+++ b/include/asm-m68k/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M68K_CPUTIME_H
+#define __M68K_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68K_CPUTIME_H */
diff --git a/include/asm-m68k/current.h b/include/asm-m68k/current.h
new file mode 100644
index 000000000000..8de8f8ceda61
--- /dev/null
+++ b/include/asm-m68k/current.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_CURRENT_H
+#define _M68K_CURRENT_H
+
+register struct task_struct *current __asm__("%a2");
+
+#endif /* !(_M68K_CURRENT_H) */
diff --git a/include/asm-m68k/delay.h b/include/asm-m68k/delay.h
new file mode 100644
index 000000000000..5ed92851bc6f
--- /dev/null
+++ b/include/asm-m68k/delay.h
@@ -0,0 +1,57 @@
+#ifndef _M68K_DELAY_H
+#define _M68K_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ */
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
+		: "=d" (loops) : "0" (loops));
+}
+
+extern void __bad_udelay(void);
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void __const_udelay(unsigned long xloops)
+{
+	unsigned long tmp;
+
+	__asm__ ("mulul %2,%0:%1"
+		: "=d" (xloops), "=d" (tmp)
+		: "d" (xloops), "1" (loops_per_jiffy));
+	__delay(xloops * HZ);
+}
+
+static inline void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 4295);	/* 2**32 / 1000000 */
+}
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \
+	__udelay(n))
+
+static inline unsigned long muldiv(unsigned long a, unsigned long b,
+				   unsigned long c)
+{
+	unsigned long tmp;
+
+	__asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
+		: "=d" (tmp), "=d" (a)
+		: "d" (b), "d" (c), "1" (a));
+	return a;
+}
+
+#endif /* defined(_M68K_DELAY_H) */
diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h
new file mode 100644
index 000000000000..9f65de1a2480
--- /dev/null
+++ b/include/asm-m68k/div64.h
@@ -0,0 +1,26 @@
+#ifndef _M68K_DIV64_H
+#define _M68K_DIV64_H
+
+/* n = n / base; return rem; */
+
+#define do_div(n, base) ({					\
+	union {							\
+		unsigned long n32[2];				\
+		unsigned long long n64;				\
+	} __n;							\
+	unsigned long __rem, __upper;				\
+								\
+	__n.n64 = (n);						\
+	if ((__upper = __n.n32[0])) {				\
+		asm ("divul.l %2,%1:%0"				\
+			: "=d" (__n.n32[0]), "=d" (__upper)	\
+			: "d" (base), "0" (__n.n32[0]));	\
+	}							\
+	asm ("divu.l %2,%1:%0"					\
+		: "=d" (__n.n32[1]), "=d" (__rem)		\
+		: "d" (base), "1" (__upper), "0" (__n.n32[1]));	\
+	(n) = __n.n64;						\
+	__rem;							\
+})
+
+#endif /* _M68K_DIV64_H */
diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h
new file mode 100644
index 000000000000..b1920c703d82
--- /dev/null
+++ b/include/asm-m68k/dma-mapping.h
@@ -0,0 +1,12 @@
+#ifndef _M68K_DMA_MAPPING_H
+#define _M68K_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif  /* _M68K_DMA_MAPPING_H */
diff --git a/include/asm-m68k/dma.h b/include/asm-m68k/dma.h
new file mode 100644
index 000000000000..d5266a886226
--- /dev/null
+++ b/include/asm-m68k/dma.h
@@ -0,0 +1,21 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+#include <linux/config.h>
+
+/* it's useless on the m68k, but unfortunately needed by the new
+   bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _M68K_DMA_H */
diff --git a/include/asm-m68k/dsp56k.h b/include/asm-m68k/dsp56k.h
new file mode 100644
index 000000000000..ab3dd33e23a1
--- /dev/null
+++ b/include/asm-m68k/dsp56k.h
@@ -0,0 +1,35 @@
+/*
+ * linux/include/asm-m68k/dsp56k.h - defines and declarations for
+ *                                   DSP56k device driver
+ *
+ * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+
+/* Used for uploading DSP binary code */
+struct dsp56k_upload {
+	int len;
+	char *bin;
+};
+
+/* For the DSP host flags */
+struct dsp56k_host_flags {
+	int dir;     /* Bit field. 1 = write output bit, 0 = do nothing.
+		      * 0x0000 means reading only, 0x0011 means
+		      * writing the bits stored in `out' on HF0 and HF1.
+		      * Note that HF2 and HF3 can only be read.
+		      */
+	int out;     /* Bit field like above. */
+	int status;  /* Host register's current state is returned */
+};
+
+/* ioctl command codes */
+#define DSP56K_UPLOAD	        1    /* Upload DSP binary program       */
+#define DSP56K_SET_TX_WSIZE	2    /* Host transmit word size (1-4)   */
+#define DSP56K_SET_RX_WSIZE	3    /* Host receive word size (1-4)    */
+#define DSP56K_HOST_FLAGS	4    /* Host flag registers             */
+#define DSP56K_HOST_CMD         5    /* Trig Host Command (0-31)        */
diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h
new file mode 100644
index 000000000000..5978f87b0a8a
--- /dev/null
+++ b/include/asm-m68k/dvma.h
@@ -0,0 +1,243 @@
+/* $Id: dvma.h,v 1.4 1999/03/27 20:23:41 tsbogend Exp $
+ * include/asm-m68k/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Hacked to fit Sun3x needs by Thomas Bogendoerfer
+ */
+
+#ifndef __M68K_DVMA_H
+#define __M68K_DVMA_H
+
+#include <linux/config.h>
+
+#define DVMA_PAGE_SHIFT	13
+#define DVMA_PAGE_SIZE	(1UL << DVMA_PAGE_SHIFT)
+#define DVMA_PAGE_MASK	(~(DVMA_PAGE_SIZE-1))
+#define DVMA_PAGE_ALIGN(addr)	(((addr)+DVMA_PAGE_SIZE-1)&DVMA_PAGE_MASK)
+
+extern void dvma_init(void);
+extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
+			  int len);
+
+#define dvma_malloc(x) dvma_malloc_align(x, 0)
+#define dvma_map(x, y) dvma_map_align(x, y, 0)
+#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
+#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
+extern unsigned long dvma_map_align(unsigned long kaddr, int len,
+			    int align);
+extern void *dvma_malloc_align(unsigned long len, unsigned long align);
+
+extern void dvma_unmap(void *baddr);
+extern void dvma_free(void *vaddr);
+
+
+#ifdef CONFIG_SUN3
+/* sun3 dvma page support */
+
+/* memory and pmegs potentially reserved for dvma */
+#define DVMA_PMEG_START 10
+#define DVMA_PMEG_END 16
+#define DVMA_START 0xf00000
+#define DVMA_END 0xfe0000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES 128
+#define IOMMU_ENTRIES 120
+
+/* empirical kludge -- dvma regions only seem to work right on 0x10000
+   byte boundaries */
+#define DVMA_REGION_SIZE 0x10000
+#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
+                         ~(DVMA_REGION_SIZE-1))
+
+/* virt <-> phys conversions */
+#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
+#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
+#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
+#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
+#define dvma_vtob(x) dvma_vtop(x)
+#define dvma_btov(x) dvma_ptov(x)
+
+static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
+			       int len)
+{
+	return 0;
+}
+
+extern unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr);
+
+#else /* Sun3x */
+
+/* sun3x dvma page support */
+
+#define DVMA_START 0x0
+#define DVMA_END 0xf00000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES	   2048
+/* the prom takes the top meg */
+#define IOMMU_ENTRIES              (IOMMU_TOTAL_ENTRIES - 0x80)
+
+#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
+#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
+
+extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
+
+
+
+/* everything below this line is specific to dma used for the onboard
+   ESP scsi on sun3x */
+
+/* Structure to describe the current status of DMA registers on the Sparc */
+struct sparc_dma_registers {
+  __volatile__ unsigned long cond_reg;	/* DMA condition register */
+  __volatile__ unsigned long st_addr;	/* Start address of this transfer */
+  __volatile__ unsigned long  cnt;	/* How many bytes to transfer */
+  __volatile__ unsigned long dma_test;	/* DMA test register */
+};
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct Linux_SBus_DMA {
+	struct Linux_SBus_DMA *next;
+	struct linux_sbus_device *SBus_dev;
+	struct sparc_dma_registers *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	unsigned long addr;      /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct Linux_SBus_DMA *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURST8	 0x00040000	   /* ENET: SBUS r/w burst size */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+	struct sparc_dma_registers *regs = dma->regs;                      \
+	/* Let the current FIFO drain itself */                            \
+	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+	/* Reset the logic */                                              \
+	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+	__delay(400);                         /* let the bits set ;) */    \
+	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+	/* Enable FAST transfers if available */                           \
+	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+	dma->running = 0;                                                  \
+} while(0)
+
+
+#endif /* !CONFIG_SUN3 */
+
+#endif /* !(__M68K_DVMA_H) */
diff --git a/include/asm-m68k/elf.h b/include/asm-m68k/elf.h
new file mode 100644
index 000000000000..38bf8347f14d
--- /dev/null
+++ b/include/asm-m68k/elf.h
@@ -0,0 +1,122 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE	0
+#define R_68K_32	1
+#define R_68K_16	2
+#define R_68K_8		3
+#define R_68K_PC32	4
+#define R_68K_PC16	5
+#define R_68K_PC8	6
+#define R_68K_GOT32	7
+#define R_68K_GOT16	8
+#define R_68K_GOT8	9
+#define R_68K_GOT32O	10
+#define R_68K_GOT16O	11
+#define R_68K_GOT8O	12
+#define R_68K_PLT32	13
+#define R_68K_PLT16	14
+#define R_68K_PLT8	15
+#define R_68K_PLT32O	16
+#define R_68K_PLT16O	17
+#define R_68K_PLT8O	18
+#define R_68K_COPY	19
+#define R_68K_GLOB_DAT	20
+#define R_68K_JMP_SLOT	21
+#define R_68K_RELATIVE	22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN3
+#define ELF_EXEC_PAGESIZE	4096
+#else
+#define ELF_EXEC_PAGESIZE	8192
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef CONFIG_SUN3
+#define ELF_ET_DYN_BASE         0xD0000000UL
+#else
+#define ELF_ET_DYN_BASE         0x0D800000UL
+#endif
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	/* Bleech. */							\
+	pr_reg[0] = regs->d1;						\
+	pr_reg[1] = regs->d2;						\
+	pr_reg[2] = regs->d3;						\
+	pr_reg[3] = regs->d4;						\
+	pr_reg[4] = regs->d5;						\
+	pr_reg[7] = regs->a0;						\
+	pr_reg[8] = regs->a1;						\
+	pr_reg[9] = regs->a2;						\
+	pr_reg[14] = regs->d0;						\
+	pr_reg[15] = rdusp();						\
+	pr_reg[16] = regs->orig_d0;					\
+	pr_reg[17] = regs->sr;						\
+	pr_reg[18] = regs->pc;						\
+	pr_reg[19] = (regs->format << 12) | regs->vector;		\
+	{								\
+	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
+	  pr_reg[5] = sw->d6;						\
+	  pr_reg[6] = sw->d7;						\
+	  pr_reg[10] = sw->a3;						\
+	  pr_reg[11] = sw->a4;						\
+	  pr_reg[12] = sw->a5;						\
+	  pr_reg[13] = sw->a6;						\
+	}
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif
diff --git a/include/asm-m68k/entry.h b/include/asm-m68k/entry.h
new file mode 100644
index 000000000000..0396495cd97d
--- /dev/null
+++ b/include/asm-m68k/entry.h
@@ -0,0 +1,138 @@
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ *	This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - sr
+ *	2E(sp) - pc
+ *	32(sp) - format & vector
+ */
+
+/*
+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
+ *		     the whole kernel.
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES)
+	/* block out HSYNC on the atari */
+#define ALLOWINT	(~0x400)
+#define	MAX_NOINT_IPL	3
+#else
+	/* portable version */
+#define ALLOWINT	(~0x700)
+#define	MAX_NOINT_IPL	0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+
+#define curptr a2
+
+LFLUSH_I_AND_D = 0x00000808
+LSIGTRAP = 5
+
+/* process bits for task_struct.ptrace */
+PT_TRACESYS_OFF = 3
+PT_TRACESYS_BIT = 1
+PT_PTRACED_OFF = 3
+PT_PTRACED_BIT = 0
+PT_DTRACE_OFF = 3
+PT_DTRACE_BIT = 2
+
+#define SAVE_ALL_INT save_all_int
+#define SAVE_ALL_SYS save_all_sys
+#define RESTORE_ALL restore_all
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro	save_all_int
+	clrl	%sp@-		| stk_adj
+	pea	-1:w		| orig d0
+	movel	%d0,%sp@-	| d0
+	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro	save_all_sys
+	clrl	%sp@-		| stk_adj
+	movel	%d0,%sp@-	| orig d0
+	movel	%d0,%sp@-	| d0
+	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro	restore_all
+	moveml	%sp@+,%a0-%a1/%curptr/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp		| orig d0
+	addl	%sp@+,%sp	| stk adj
+	rte
+.endm
+
+#define SWITCH_STACK_SIZE (6*4+4)	/* includes return address */
+
+#define SAVE_SWITCH_STACK save_switch_stack
+#define RESTORE_SWITCH_STACK restore_switch_stack
+#define GET_CURRENT(tmp) get_current tmp
+
+.macro	save_switch_stack
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro	restore_switch_stack
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+.macro	get_current reg=%d0
+	movel	%sp,\reg
+	andw	#-THREAD_SIZE,\reg
+	movel	\reg,%curptr
+	movel	%curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define PT_OFF_ORIG_D0	 0x24
+#define PT_OFF_FORMATVEC 0x32
+#define PT_OFF_SR	 0x2C
+#define SAVE_ALL_INT				\
+	"clrl	%%sp@-;"    /* stk_adj */	\
+	"pea	-1:w;"	    /* orig d0 = -1 */	\
+	"movel	%%d0,%%sp@-;" /* d0 */		\
+	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@-"
+#define GET_CURRENT(tmp) \
+	"movel	%%sp,"#tmp"\n\t" \
+	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
+	"movel	"#tmp",%%a2\n\t" \
+	"movel	%%a2@,%%a2"
+
+#endif
+
+#endif /* __M68K_ENTRY_H */
diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h
new file mode 100644
index 000000000000..0d4e188d6ef6
--- /dev/null
+++ b/include/asm-m68k/errno.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_ERRNO_H
+#define _M68K_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _M68K_ERRNO_H */
diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h
new file mode 100644
index 000000000000..c17edf8c7bc4
--- /dev/null
+++ b/include/asm-m68k/fbio.h
@@ -0,0 +1 @@
+#include <asm-sparc/fbio.h>
diff --git a/include/asm-m68k/fcntl.h b/include/asm-m68k/fcntl.h
new file mode 100644
index 000000000000..0d4212983a33
--- /dev/null
+++ b/include/asm-m68k/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef _M68K_FCNTL_H
+#define _M68K_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	  0003
+#define O_RDONLY	    00
+#define O_WRONLY	    01
+#define O_RDWR		    02
+#define O_CREAT		  0100	/* not fcntl */
+#define O_EXCL		  0200	/* not fcntl */
+#define O_NOCTTY	  0400	/* not fcntl */
+#define O_TRUNC		 01000	/* not fcntl */
+#define O_APPEND	 02000
+#define O_NONBLOCK	 04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		010000
+#define FASYNC		020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* _M68K_FCNTL_H */
diff --git a/include/asm-m68k/floppy.h b/include/asm-m68k/floppy.h
new file mode 100644
index 000000000000..c6e708dd9f62
--- /dev/null
+++ b/include/asm-m68k/floppy.h
@@ -0,0 +1,259 @@
+/*
+ * Implementation independent bits of the Floppy driver.
+ *
+ * much of this file is derived from what was originally the Q40 floppy driver.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2001
+ *
+ * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net)
+ *
+ */
+
+#include <asm/io.h>
+
+#include <linux/vmalloc.h>
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id,
+				      struct pt_regs *regs);
+
+/* constants... */
+
+#undef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS   0x00  /* nothing like that */
+
+
+/*
+ * Again, the CMOS information doesn't work on m68k..
+ */
+#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4)
+#define FLOPPY1_TYPE 0
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+
+/* basically PC init + set use_virtual_dma */
+#define  FDC1 m68k_floppy_init()
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+
+/* vdma globals adapted from asm-i386/floppy.h */
+
+static int virtual_dma_count=0;
+static int virtual_dma_residue=0;
+static char *virtual_dma_addr=0;
+static int virtual_dma_mode=0;
+static int doing_pdma=0;
+
+#include <asm/sun3xflop.h>
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+
+static __inline__ unsigned char fd_inb(int port)
+{
+	if(MACH_IS_Q40)
+		return inb_p(port);
+	else if(MACH_IS_SUN3X)
+		return sun3x_82072_fd_inb(port);
+	return 0;
+}
+
+static __inline__ void fd_outb(unsigned char value, int port)
+{
+	if(MACH_IS_Q40)
+		outb_p(value, port);
+	else if(MACH_IS_SUN3X)
+		sun3x_82072_fd_outb(value, port);
+}
+
+
+static int fd_request_irq(void)
+{
+	if(MACH_IS_Q40)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", floppy_hardint);
+	else if(MACH_IS_SUN3X)
+		return sun3xflop_request_irq();
+	return -ENXIO;
+}
+
+static void fd_free_irq(void)
+{
+	if(MACH_IS_Q40)
+		free_irq(FLOPPY_IRQ, floppy_hardint);
+}
+
+#define fd_request_dma()        vdma_request_dma(FLOPPY_DMA,"floppy")
+#define fd_get_dma_residue()    vdma_get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	vdma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
+
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+
+#define fd_free_dma()             /* nothing */
+
+/* No 64k boundary crossing problems on Q40 - no DMA at all */
+#define CROSS_64KB(a,s) (0)
+
+#define DMA_MODE_READ  0x44    /* i386 look-alike */
+#define DMA_MODE_WRITE 0x48
+
+
+static int m68k_floppy_init(void)
+{
+  use_virtual_dma =1;
+  can_use_virtual_dma = 1;
+
+
+  if (MACH_IS_Q40)
+	  return 0x3f0;
+  else if(MACH_IS_SUN3X)
+	  return sun3xflop_init();
+  else
+    return -1;
+}
+
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+        vfree((void *)addr);
+}
+#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size)
+
+
+/* choose_dma_mode ???*/
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = (MACH_IS_Q40 ? io : 0);
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+
+
+static void fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+
+
+/* this is the only truly Q40 specific function */
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id,
+				      struct pt_regs *regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if(!doing_pdma) {
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr;
+
+		/* serve 1st byte fast: */
+
+		st=1;
+		for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+		    lcount; lcount--, lptr++) {
+			st=inb(virtual_dma_port+4) & 0xa0 ;
+			if(st != 0xa0)
+				break;
+			if(virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port+5);
+			else
+				*lptr = inb_p(virtual_dma_port+5);
+		}
+
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port+4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if(st == 0x20)
+		return IRQ_HANDLED;
+	if(!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+#ifdef TRACE_FLPY_INT
+	if(!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+#define EXTRA_FLOPPY_PARAMS
diff --git a/include/asm-m68k/fpu.h b/include/asm-m68k/fpu.h
new file mode 100644
index 000000000000..3bcf85065c19
--- /dev/null
+++ b/include/asm-m68k/fpu.h
@@ -0,0 +1,22 @@
+#ifndef __M68K_FPU_H
+#define __M68K_FPU_H
+
+#include <linux/config.h>
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+#define FPSTATESIZE error no_cpu_type_configured
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/include/asm-m68k/hardirq.h b/include/asm-m68k/hardirq.h
new file mode 100644
index 000000000000..728318bf7f0e
--- /dev/null
+++ b/include/asm-m68k/hardirq.h
@@ -0,0 +1,26 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif
diff --git a/include/asm-m68k/hdreg.h b/include/asm-m68k/hdreg.h
new file mode 100644
index 000000000000..5989bbc97cbf
--- /dev/null
+++ b/include/asm-m68k/hdreg.h
@@ -0,0 +1 @@
+#warning this file is obsolete, please do not use it
diff --git a/include/asm-m68k/hp300hw.h b/include/asm-m68k/hp300hw.h
new file mode 100644
index 000000000000..d998ea67c19c
--- /dev/null
+++ b/include/asm-m68k/hp300hw.h
@@ -0,0 +1,25 @@
+#ifndef _M68K_HP300HW_H
+#define _M68K_HP300HW_H
+
+extern unsigned long hp300_model;
+
+/* This information was taken from NetBSD */
+#define	HP_320		(0)	/* 16MHz 68020+HP MMU+16K external cache */
+#define	HP_330		(1)	/* 16MHz 68020+68851 MMU */
+#define	HP_340		(2)	/* 16MHz 68030 */
+#define	HP_345		(3)	/* 50MHz 68030+32K external cache */
+#define	HP_350		(4)	/* 25MHz 68020+HP MMU+32K external cache */
+#define	HP_360		(5)	/* 25MHz 68030 */
+#define	HP_370		(6)	/* 33MHz 68030+64K external cache */
+#define	HP_375		(7)	/* 50MHz 68030+32K external cache */
+#define	HP_380		(8)	/* 25MHz 68040 */
+#define	HP_385		(9)	/* 33MHz 68040 */
+
+#define	HP_400		(10)	/* 50MHz 68030+32K external cache */
+#define	HP_425T		(11)	/* 25MHz 68040 - model 425t */
+#define	HP_425S		(12)	/* 25MHz 68040 - model 425s */
+#define HP_425E		(13)	/* 25MHz 68040 - model 425e */
+#define HP_433T		(14)	/* 33MHz 68040 - model 433t */
+#define HP_433S		(15)	/* 33MHz 68040 - model 433s */
+
+#endif /* _M68K_HP300HW_H */
diff --git a/include/asm-m68k/hw_irq.h b/include/asm-m68k/hw_irq.h
new file mode 100644
index 000000000000..eacef0951fbf
--- /dev/null
+++ b/include/asm-m68k/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_M68K_HW_IRQ_H
+#define __ASM_M68K_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/include/asm-m68k/hwtest.h b/include/asm-m68k/hwtest.h
new file mode 100644
index 000000000000..402c8a4401fe
--- /dev/null
+++ b/include/asm-m68k/hwtest.h
@@ -0,0 +1,15 @@
+/* Routines to test for presence/absence of hardware registers:
+ * see arch/m68k/mm/hwtest.c.
+ *  -- PMM <pmaydell@chiark.greenend.org.uk> 05/1998
+ *
+ * Removed __init from decls.  We might want them in modules, and
+ * the code is tiny anyway.  16/5/98 pb
+ */
+
+#ifndef __ASM_HWTEST_H
+#define __ASM_HWTEST_H
+
+extern int hwreg_present(volatile void *regp);
+extern int hwreg_write(volatile void *regp, unsigned short val);
+
+#endif
diff --git a/include/asm-m68k/ide.h b/include/asm-m68k/ide.h
new file mode 100644
index 000000000000..36118fd01867
--- /dev/null
+++ b/include/asm-m68k/ide.h
@@ -0,0 +1,144 @@
+/*
+ *  linux/include/asm-m68k/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/* Copyright(c) 1996 Kars de Jong */
+/* Based on the ide driver from 1.2.13pl8 */
+
+/*
+ * Credits (alphabetical):
+ *
+ *  - Bjoern Brauel
+ *  - Kars de Jong
+ *  - Torsten Ebeling
+ *  - Dwight Engen
+ *  - Thorsten Floeck
+ *  - Roman Hodek
+ *  - Guenther Kelleter
+ *  - Chris Lawrence
+ *  - Michael Rausch
+ *  - Christian Sauer
+ *  - Michael Schmitz
+ *  - Jes Soerensen
+ *  - Michael Thurm
+ *  - Geert Uytterhoeven
+ */
+
+#ifndef _M68K_IDE_H
+#define _M68K_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ATARI
+#include <linux/interrupt.h>
+#include <asm/atari_stdma.h>
+#endif
+
+#ifdef CONFIG_MAC
+#include <asm/macints.h>
+#endif
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4	/* same as the other archs */
+#endif
+
+/*
+ * Get rid of defs from io.h - ide has its private and conflicting versions
+ * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
+ * always use the `raw' MMIO versions
+ */
+#undef inb
+#undef inw
+#undef insw
+#undef inl
+#undef insl
+#undef outb
+#undef outw
+#undef outsw
+#undef outl
+#undef outsl
+#undef readb
+#undef readw
+#undef readl
+#undef writeb
+#undef writew
+#undef writel
+
+#define inb				in_8
+#define inw				in_be16
+#define insw(port, addr, n)		raw_insw((u16 *)port, addr, n)
+#define inl				in_be32
+#define insl(port, addr, n)		raw_insl((u32 *)port, addr, n)
+#define outb(val, port)			out_8(port, val)
+#define outw(val, port)			out_be16(port, val)
+#define outsw(port, addr, n)		raw_outsw((u16 *)port, addr, n)
+#define outl(val, port)			out_be32(port, val)
+#define outsl(port, addr, n)		raw_outsl((u32 *)port, addr, n)
+#define readb				in_8
+#define readw				in_be16
+#define __ide_mm_insw(port, addr, n)	raw_insw((u16 *)port, addr, n)
+#define readl				in_be32
+#define __ide_mm_insl(port, addr, n)	raw_insl((u32 *)port, addr, n)
+#define writeb(val, port)		out_8(port, val)
+#define writew(val, port)		out_be16(port, val)
+#define __ide_mm_outsw(port, addr, n)	raw_outsw((u16 *)port, addr, n)
+#define writel(val, port)		out_be32(port, val)
+#define __ide_mm_outsl(port, addr, n)	raw_outsl((u32 *)port, addr, n)
+#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
+#define insw_swapw(port, addr, n)	raw_insw_swapw((u16 *)port, addr, n)
+#define outsw_swapw(port, addr, n)	raw_outsw_swapw((u16 *)port, addr, n)
+#endif
+
+
+/* Q40 and Atari have byteswapped IDE busses and since many interesting
+ * values in the identification string are text, chars and words they
+ * happened to be almost correct without swapping.. However *_capacity
+ * is needed for drives over 8 GB. RZ */
+#if defined(CONFIG_Q40) || defined(CONFIG_ATARI)
+#define M68K_IDE_SWAPW  (MACH_IS_Q40 || MACH_IS_ATARI)
+#endif
+
+#ifdef CONFIG_BLK_DEV_FALCON_IDE
+#define IDE_ARCH_LOCK
+
+extern int falconide_intr_lock;
+
+static __inline__ void ide_release_lock (void)
+{
+	if (MACH_IS_ATARI) {
+		if (falconide_intr_lock == 0) {
+			printk("ide_release_lock: bug\n");
+			return;
+		}
+		falconide_intr_lock = 0;
+		stdma_release();
+	}
+}
+
+static __inline__ void
+ide_get_lock(irqreturn_t (*handler)(int, void *, struct pt_regs *), void *data)
+{
+	if (MACH_IS_ATARI) {
+		if (falconide_intr_lock == 0) {
+			if (in_interrupt() > 0)
+				panic( "Falcon IDE hasn't ST-DMA lock in interrupt" );
+			stdma_lock(handler, data);
+			falconide_intr_lock = 1;
+		}
+	}
+}
+#endif /* CONFIG_BLK_DEV_FALCON_IDE */
+
+#define IDE_ARCH_ACK_INTR
+#define ide_ack_intr(hwif)	((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
+
+#endif /* __KERNEL__ */
+#endif /* _M68K_IDE_H */
diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h
new file mode 100644
index 000000000000..4349eaf3cfe4
--- /dev/null
+++ b/include/asm-m68k/idprom.h
@@ -0,0 +1,8 @@
+#ifndef _M68K_IDPROM_H
+#define _M68K_IDPROM_H
+#include <asm-sparc/idprom.h>
+
+/* Sun3: in control space */
+#define SUN3_IDPROM_BASE	0x00000000
+
+#endif /* !(_M68K_IDPROM_H) */
diff --git a/include/asm-m68k/intersil.h b/include/asm-m68k/intersil.h
new file mode 100644
index 000000000000..f482902cac8a
--- /dev/null
+++ b/include/asm-m68k/intersil.h
@@ -0,0 +1,48 @@
+#ifndef _SUN3_INTERSIL_H
+#define _SUN3_INTERSIL_H
+/* bits 0 and 1 */
+#define INTERSIL_FREQ_32K        0x00
+#define INTERSIL_FREQ_1M         0x01
+#define INTERSIL_FREQ_2M         0x02
+#define INTERSIL_FREQ_4M         0x03
+
+/* bit 2 */
+#define INTERSIL_12H_MODE   0x00
+#define INTERSIL_24H_MODE   0x04
+
+/* bit 3 */
+#define INTERSIL_STOP            0x00
+#define INTERSIL_RUN             0x08
+
+/* bit 4 */
+#define INTERSIL_INT_ENABLE     0x10
+#define INTERSIL_INT_DISABLE    0x00
+
+/* bit 5 */
+#define INTERSIL_MODE_NORMAL     0x00
+#define INTERSIL_MODE_TEST       0x20
+
+#define INTERSIL_HZ_100_MASK	 0x02
+
+struct intersil_dt {
+	unsigned char	csec;
+	unsigned char	hour;
+	unsigned char	minute;
+	unsigned char	second;
+	unsigned char	month;
+	unsigned char	day;
+	unsigned char	year;
+	unsigned char	weekday;
+};
+
+struct intersil_7170 {
+	struct intersil_dt counter;
+	struct intersil_dt alarm;
+	unsigned char	int_reg;
+	unsigned char	cmd_reg;
+};
+
+extern volatile char* clock_va;
+#define intersil_clock ((volatile struct intersil_7170 *) clock_va)
+#define intersil_clear() (void)intersil_clock->int_reg
+#endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
new file mode 100644
index 000000000000..6bb8b0d8f99d
--- /dev/null
+++ b/include/asm-m68k/io.h
@@ -0,0 +1,376 @@
+/*
+ * linux/include/asm-m68k/io.h
+ *
+ * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
+ *              IO access
+ *            - added Q40 support
+ *            - added skeleton for GG-II and Amiga PCMCIA
+ * 2/3/01 RZ: - moved a few more defs into raw_io.h
+ *
+ * inX/outX/readX/writeX should not be used by any driver unless it does
+ * ISA or PCI access. Other drivers should use function defined in raw_io.h
+ * or define its own macros on top of these.
+ *
+ *    inX(),outX()              are for PCI and ISA I/O
+ *    readX(),writeX()          are for PCI memory
+ *    isa_readX(),isa_writeX()  are for ISA memory
+ *
+ * moved mem{cpy,set}_*io inside CONFIG_PCI
+ */
+
+#ifndef _IO_H
+#define _IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/raw_io.h>
+#include <asm/virtconvert.h>
+
+
+#ifdef CONFIG_ATARI
+#include <asm/atarihw.h>
+#endif
+
+
+/*
+ * IO/MEM definitions for various ISA bridges
+ */
+
+
+#ifdef CONFIG_Q40
+
+#define q40_isa_io_base  0xff400000
+#define q40_isa_mem_base 0xff800000
+
+#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr)))
+#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+  4*((unsigned long)(ioaddr)))
+#define Q40_ISA_MEM_B(madr)  (q40_isa_mem_base+1+4*((unsigned long)(madr)))
+#define Q40_ISA_MEM_W(madr)  (q40_isa_mem_base+  4*((unsigned long)(madr)))
+
+#define MULTI_ISA 0
+#endif /* Q40 */
+
+/* GG-II Zorro to ISA bridge */
+#ifdef CONFIG_GG2
+
+extern unsigned long gg2_isa_base;
+#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4))
+#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+  ((unsigned long)(ioaddr)*4))
+#define GG2_ISA_MEM_B(madr)  (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff))
+#define GG2_ISA_MEM_W(madr)  (gg2_isa_base+  (((unsigned long)(madr)*4) & 0xfffff))
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* GG2 */
+
+#ifdef CONFIG_AMIGA_PCMCIA
+#include <asm/amigayle.h>
+
+#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) )
+#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) )
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* AMIGA_PCMCIA */
+
+
+
+#ifdef CONFIG_ISA
+
+#if MULTI_ISA == 0
+#undef MULTI_ISA
+#endif
+
+#define Q40_ISA (1)
+#define GG2_ISA (2)
+#define AG_ISA  (3)
+
+#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
+#define ISA_TYPE Q40_ISA
+#define ISA_SEX  0
+#endif
+#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
+#define ISA_TYPE AG_ISA
+#define ISA_SEX  1
+#endif
+#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
+#define ISA_TYPE GG2_ISA
+#define ISA_SEX  0
+#endif
+
+#ifdef MULTI_ISA
+extern int isa_type;
+extern int isa_sex;
+
+#define ISA_TYPE isa_type
+#define ISA_SEX  isa_sex
+#endif
+
+/*
+ * define inline addr translation functions. Normally only one variant will
+ * be compiled in so the case statement will be optimised away
+ */
+
+static inline u8 *isa_itb(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case Q40_ISA: return (u8 *)Q40_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_GG2
+    case GG2_ISA: return (u8 *)GG2_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case AG_ISA: return (u8 *)AG_ISA_IO_B(addr);
+#endif
+    default: return 0; /* avoid warnings, just in case */
+    }
+}
+static inline u16 *isa_itw(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case Q40_ISA: return (u16 *)Q40_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_GG2
+    case GG2_ISA: return (u16 *)GG2_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case AG_ISA: return (u16 *)AG_ISA_IO_W(addr);
+#endif
+    default: return 0; /* avoid warnings, just in case */
+    }
+}
+static inline u8 *isa_mtb(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case Q40_ISA: return (u8 *)Q40_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_GG2
+    case GG2_ISA: return (u8 *)GG2_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case AG_ISA: return (u8 *)addr;
+#endif
+    default: return 0; /* avoid warnings, just in case */
+    }
+}
+static inline u16 *isa_mtw(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case Q40_ISA: return (u16 *)Q40_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_GG2
+    case GG2_ISA: return (u16 *)GG2_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case AG_ISA: return (u16 *)addr;
+#endif
+    default: return 0; /* avoid warnings, just in case */
+    }
+}
+
+
+#define isa_inb(port)      in_8(isa_itb(port))
+#define isa_inw(port)      (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
+#define isa_outb(val,port) out_8(isa_itb(port),(val))
+#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
+
+#define isa_readb(p)       in_8(isa_mtb((unsigned long)(p)))
+#define isa_readw(p)       \
+	(ISA_SEX ? in_be16(isa_mtw((unsigned long)(p)))	\
+		 : in_le16(isa_mtw((unsigned long)(p))))
+#define isa_writeb(val,p)  out_8(isa_mtb((unsigned long)(p)),(val))
+#define isa_writew(val,p)  \
+	(ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val))	\
+		 : out_le16(isa_mtw((unsigned long)(p)),(val)))
+
+static inline void isa_delay(void)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case Q40_ISA: isa_outb(0,0x80); break;
+#endif
+#ifdef CONFIG_GG2
+    case GG2_ISA: break;
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case AG_ISA: break;
+#endif
+    default: break; /* avoid warnings */
+    }
+}
+
+#define isa_inb_p(p)      ({u8 v=isa_inb(p);isa_delay();v;})
+#define isa_outb_p(v,p)   ({isa_outb((v),(p));isa_delay();})
+#define isa_inw_p(p)      ({u16 v=isa_inw(p);isa_delay();v;})
+#define isa_outw_p(v,p)   ({isa_outw((v),(p));isa_delay();})
+#define isa_inl_p(p)      ({u32 v=isa_inl(p);isa_delay();v;})
+#define isa_outl_p(v,p)   ({isa_outl((v),(p));isa_delay();})
+
+#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr))
+#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr))
+
+#define isa_insw(port, buf, nr)     \
+       (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) :    \
+                  raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+
+#define isa_outsw(port, buf, nr)    \
+       (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) :  \
+                  raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+#endif  /* CONFIG_ISA */
+
+
+#if defined(CONFIG_ISA) && !defined(CONFIG_PCI)
+#define inb     isa_inb
+#define inb_p   isa_inb_p
+#define outb    isa_outb
+#define outb_p  isa_outb_p
+#define inw     isa_inw
+#define inw_p   isa_inw_p
+#define outw    isa_outw
+#define outw_p  isa_outw_p
+#define inl     isa_inw
+#define inl_p   isa_inw_p
+#define outl    isa_outw
+#define outl_p  isa_outw_p
+#define insb    isa_insb
+#define insw    isa_insw
+#define outsb   isa_outsb
+#define outsw   isa_outsw
+#define readb   isa_readb
+#define readw   isa_readw
+#define writeb  isa_writeb
+#define writew  isa_writew
+#endif /* CONFIG_ISA */
+
+#if defined(CONFIG_PCI)
+
+#define inl(port)        in_le32(port)
+#define outl(val,port)   out_le32((port),(val))
+#define readl(addr)      in_le32(addr)
+#define writel(val,addr) out_le32((addr),(val))
+
+/* those can be defined for both ISA and PCI - it won't work though */
+#define readb(addr)       in_8(addr)
+#define readw(addr)       in_le16(addr)
+#define writeb(val,addr)  out_8((addr),(val))
+#define writew(val,addr)  out_le16((addr),(val))
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#ifndef CONFIG_ISA
+#define inb(port)      in_8(port)
+#define outb(val,port) out_8((port),(val))
+#define inw(port)      in_le16(port)
+#define outw(val,port) out_le16((port),(val))
+
+#else
+/*
+ * kernel with both ISA and PCI compiled in, those have
+ * conflicting defs for in/out. Simply consider port < 1024
+ * ISA and everything else PCI. read,write not defined
+ * in this case
+ */
+#define inb(port) ((port)<1024 ? isa_inb(port) : in_8(port))
+#define inb_p(port) ((port)<1024 ? isa_inb_p(port) : in_8(port))
+#define inw(port) ((port)<1024 ? isa_inw(port) : in_le16(port))
+#define inw_p(port) ((port)<1024 ? isa_inw_p(port) : in_le16(port))
+#define inl(port) ((port)<1024 ? isa_inl(port) : in_le32(port))
+#define inl_p(port) ((port)<1024 ? isa_inl_p(port) : in_le32(port))
+
+#define outb(val,port) ((port)<1024 ? isa_outb((val),(port)) : out_8((port),(val)))
+#define outb_p(val,port) ((port)<1024 ? isa_outb_p((val),(port)) : out_8((port),(val)))
+#define outw(val,port) ((port)<1024 ? isa_outw((val),(port)) : out_le16((port),(val)))
+#define outw_p(val,port) ((port)<1024 ? isa_outw_p((val),(port)) : out_le16((port),(val)))
+#define outl(val,port) ((port)<1024 ? isa_outl((val),(port)) : out_le32((port),(val)))
+#define outl_p(val,port) ((port)<1024 ? isa_outl_p((val),(port)) : out_le32((port),(val)))
+#endif
+#endif /* CONFIG_PCI */
+
+#if !defined(CONFIG_ISA) && !defined(CONFIG_PCI) && defined(CONFIG_HP300)
+/*
+ * We need to define dummy functions otherwise drivers/serial/8250.c doesn't link
+ */
+#define inb(port)        0xff
+#define inb_p(port)      0xff
+#define outb(val,port)   do { } while (0)
+#define outb_p(val,port) do { } while (0)
+
+/*
+ * These should be valid on any ioremap()ed region
+ */
+#define readb(addr)      in_8(addr)
+#define writeb(val,addr) out_8((addr),(val))
+#define readl(addr)      in_le32(addr)
+#define writel(val,addr) out_le32((addr),(val))
+#endif
+
+#define mmiowb()
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr,
+					 unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr,
+				      unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+
+/* m68k caches aren't DMA coherent */
+extern void dma_cache_wback_inv(unsigned long start, unsigned long size);
+extern void dma_cache_wback(unsigned long start, unsigned long size);
+extern void dma_cache_inv(unsigned long start, unsigned long size);
+
+
+#ifndef CONFIG_SUN3
+#define IO_SPACE_LIMIT 0xffff
+#else
+#define IO_SPACE_LIMIT 0x0fffffff
+#endif
+
+#endif /* __KERNEL__ */
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* _IO_H */
diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h
new file mode 100644
index 000000000000..fd68914ab292
--- /dev/null
+++ b/include/asm-m68k/ioctl.h
@@ -0,0 +1,80 @@
+/* $Id: ioctl.h,v 1.3 1997/04/16 15:10:07 jes Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _M68K_IOCTL_H
+#define _M68K_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * I don't really have any idea about what this should look like, so
+ * for the time being, this is heavily based on the PC definitions.
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _M68K_IOCTL_H */
diff --git a/include/asm-m68k/ioctls.h b/include/asm-m68k/ioctls.h
new file mode 100644
index 000000000000..0c48929ab444
--- /dev/null
+++ b/include/asm-m68k/ioctls.h
@@ -0,0 +1,80 @@
+#ifndef __ARCH_M68K_IOCTLS_H__
+#define __ARCH_M68K_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ARCH_M68K_IOCTLS_H__ */
diff --git a/include/asm-m68k/ipc.h b/include/asm-m68k/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-m68k/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-m68k/ipcbuf.h b/include/asm-m68k/ipcbuf.h
new file mode 100644
index 000000000000..a623ea3f0955
--- /dev/null
+++ b/include/asm-m68k/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __m68k_IPCBUF_H__
+#define __m68k_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __m68k_IPCBUF_H__ */
diff --git a/include/asm-m68k/irq.h b/include/asm-m68k/irq.h
new file mode 100644
index 000000000000..1f569905cb74
--- /dev/null
+++ b/include/asm-m68k/irq.h
@@ -0,0 +1,131 @@
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+
+/*
+ * # of m68k interrupts
+ */
+
+#define SYS_IRQS 8
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS (72+SYS_IRQS)
+#else
+#define NR_IRQS (24+SYS_IRQS)
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ1		(1)	/* level 1 interrupt */
+#define IRQ2		(2)	/* level 2 interrupt */
+#define IRQ3		(3)	/* level 3 interrupt */
+#define IRQ4		(4)	/* level 4 interrupt */
+#define IRQ5		(5)	/* level 5 interrupt */
+#define IRQ6		(6)	/* level 6 interrupt */
+#define IRQ7		(7)	/* level 7 interrupt (non-maskable) */
+
+/*
+ * "Generic" interrupt sources
+ */
+
+#define IRQ_SCHED_TIMER	(8)    /* interrupt source for scheduling timer */
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time.
+ *                                                      01/11/97 - Jes
+ */
+
+extern void (*enable_irq)(unsigned int);
+extern void (*disable_irq)(unsigned int);
+
+#define disable_irq_nosync	disable_irq
+#define enable_irq_nosync	enable_irq
+
+struct pt_regs;
+
+extern int cpu_request_irq(unsigned int,
+			   irqreturn_t (*)(int, void *, struct pt_regs *),
+			   unsigned long, const char *, void *);
+extern void cpu_free_irq(unsigned int, void *);
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
+ * are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
+#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
+#define IRQ_FLG_FAST	(0x0004)
+#define IRQ_FLG_SLOW	(0x0008)
+#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+	struct irq_node *next;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+typedef struct irq_handler {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+} irq_handler_t;
+
+/* count of spurious interrupts */
+extern volatile unsigned int num_spurious;
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/include/asm-m68k/kbio.h b/include/asm-m68k/kbio.h
new file mode 100644
index 000000000000..e1fbf8fba3e8
--- /dev/null
+++ b/include/asm-m68k/kbio.h
@@ -0,0 +1 @@
+#include <asm-sparc/kbio.h>
diff --git a/include/asm-m68k/kmap_types.h b/include/asm-m68k/kmap_types.h
new file mode 100644
index 000000000000..c843c63d3801
--- /dev/null
+++ b/include/asm-m68k/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif	/* __ASM_M68K_KMAP_TYPES_H */
diff --git a/include/asm-m68k/linkage.h b/include/asm-m68k/linkage.h
new file mode 100644
index 000000000000..5a822bb790f7
--- /dev/null
+++ b/include/asm-m68k/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/include/asm-m68k/local.h b/include/asm-m68k/local.h
new file mode 100644
index 000000000000..6c259263e1f0
--- /dev/null
+++ b/include/asm-m68k/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_LOCAL_H
+#define _ASM_M68K_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_M68K_LOCAL_H */
diff --git a/include/asm-m68k/mac_asc.h b/include/asm-m68k/mac_asc.h
new file mode 100644
index 000000000000..fc2e5467b41e
--- /dev/null
+++ b/include/asm-m68k/mac_asc.h
@@ -0,0 +1,27 @@
+/*
+ *	Apple Sound Chip
+ */
+
+#ifndef __ASM_MAC_ASC_H
+#define __ASM_MAC_ASC_H
+
+/*
+ *	ASC offsets and controls
+ */
+
+#define ASC_BUF_BASE	0x00	/* RAM buffer offset */
+#define ASC_BUF_SIZE	0x800
+
+#define ASC_CONTROL	0x800
+#define ASC_CONTROL_OFF		0x00
+#define ASC_FREQ(chan,byte)	((0x810)+((chan)<<3)+(byte))
+#define ASC_ENABLE	0x801
+#define ASC_ENABLE_SAMPLE	0x02
+#define ASC_MODE	0x802
+#define ASC_MODE_SAMPLE		0x02
+
+#define ASC_VOLUME	0x806
+#define ASC_CHAN	0x807	/* ??? */
+
+
+#endif
diff --git a/include/asm-m68k/mac_baboon.h b/include/asm-m68k/mac_baboon.h
new file mode 100644
index 000000000000..e87850830be8
--- /dev/null
+++ b/include/asm-m68k/mac_baboon.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for the "Baboon" custom IC on the PowerBook 190.
+ */
+
+#define BABOON_BASE (0x50F1A000)	/* same as IDE controller base */
+
+#ifndef __ASSEMBLY__
+
+struct baboon {
+	char	pad1[208];	/* generic IDE registers, not used here */
+	short	mb_control;	/* Control register:
+				 * bit 5 : slot 2 power control
+				 * bit 6 : slot 1 power control
+				 */
+	char	pad2[2];
+	short	mb_status;	/* (0xD4) media bay status register:
+				 *
+				 * bit 0: ????
+				 * bit 1: IDE interrupt active?
+				 * bit 2: bay status, 0 = full, 1 = empty
+				 * bit 3: ????
+				 */
+	char	pad3[2];	/* (0xD6) not used */
+	short	mb_ifr;		/* (0xD8) media bay interrupt flags register:
+				 *
+				 * bit 0: ????
+				 * bit 1: IDE controller interrupt
+				 * bit 2: media bay status change interrupt
+				 */
+};
+
+extern volatile struct baboon *baboon;
+
+#endif /* __ASSEMBLY **/
diff --git a/include/asm-m68k/mac_iop.h b/include/asm-m68k/mac_iop.h
new file mode 100644
index 000000000000..b0d2e3473537
--- /dev/null
+++ b/include/asm-m68k/mac_iop.h
@@ -0,0 +1,162 @@
+/*
+ * I/O Processor (IOP) defines and structures, mostly snagged from A/UX
+ * header files.
+ *
+ * The original header from which this was taken is copyrighted. I've done some
+ * rewriting (in fact my changes make this a bit more readable, IMHO) but some
+ * more should be done.
+ */
+
+/*
+ * This is the base address of the IOPs. Use this as the address of
+ * a "struct iop" (see below) to see where the actual registers fall.
+ */
+
+#define SCC_IOP_BASE_IIFX	(0x50F04000)
+#define ISM_IOP_BASE_IIFX	(0x50F12000)
+
+#define SCC_IOP_BASE_QUADRA	(0x50F0C000)
+#define ISM_IOP_BASE_QUADRA	(0x50F1E000)
+
+/* IOP status/control register bits: */
+
+#define	IOP_BYPASS	0x01	/* bypass-mode hardware access */
+#define	IOP_AUTOINC	0x02	/* allow autoincrement of ramhi/lo */
+#define	IOP_RUN		0x04	/* set to 0 to reset IOP chip */
+#define	IOP_IRQ		0x08	/* generate IRQ to IOP if 1 */
+#define	IOP_INT0	0x10	/* intr priority from IOP to host */
+#define	IOP_INT1	0x20	/* intr priority from IOP to host */
+#define	IOP_HWINT	0x40	/* IRQ from hardware; bypass mode only */
+#define	IOP_DMAINACTIVE	0x80	/* no DMA request active; bypass mode only */
+
+#define NUM_IOPS	2
+#define NUM_IOP_CHAN	7
+#define NUM_IOP_MSGS	NUM_IOP_CHAN*8
+#define IOP_MSG_LEN	32
+
+/* IOP reference numbers, used by the globally-visible iop_xxx functions */
+
+#define IOP_NUM_SCC	0
+#define IOP_NUM_ISM	1
+
+/* IOP channel states */
+
+#define IOP_MSG_IDLE		0       /* idle                         */
+#define IOP_MSG_NEW		1       /* new message sent             */
+#define IOP_MSG_RCVD		2       /* message received; processing */
+#define IOP_MSG_COMPLETE	3       /* message processing complete  */
+
+/* IOP message status codes */
+
+#define IOP_MSGSTATUS_UNUSED	0	/* Unusued message structure       */
+#define IOP_MSGSTATUS_WAITING	1	/* waiting for channel             */
+#define IOP_MSGSTATUS_SENT	2	/* message sent, awaiting reply    */
+#define IOP_MSGSTATUS_COMPLETE	3	/* message complete and reply rcvd */
+#define IOP_MSGSTATUS_UNSOL	6	/* message is unsolicited          */
+
+/* IOP memory addresses of the members of the mac_iop_kernel structure. */
+
+#define IOP_ADDR_MAX_SEND_CHAN	0x0200
+#define IOP_ADDR_SEND_STATE	0x0201
+#define IOP_ADDR_PATCH_CTRL	0x021F
+#define IOP_ADDR_SEND_MSG	0x0220
+#define IOP_ADDR_MAX_RECV_CHAN	0x0300
+#define IOP_ADDR_RECV_STATE	0x0301
+#define IOP_ADDR_ALIVE		0x031F
+#define IOP_ADDR_RECV_MSG	0x0320
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOP Control registers, staggered because in usual Apple style they were
+ * too lazy to decode the A0 bit. This structure is assumed to begin at
+ * one of the xxx_IOP_BASE addresses given above.
+ */
+
+struct mac_iop {
+    __u8	ram_addr_hi;	/* shared RAM address hi byte */
+    __u8	pad0;
+    __u8	ram_addr_lo;	/* shared RAM address lo byte */
+    __u8	pad1;
+    __u8	status_ctrl;	/* status/control register */
+    __u8	pad2[3];
+    __u8	ram_data;	/* RAM data byte at ramhi/lo */
+
+    __u8	pad3[23];
+
+    /* Bypass-mode hardware access registers */
+
+    union {
+	struct {		/* SCC registers */
+	    __u8 sccb_cmd;	/* SCC B command reg */
+	    __u8 pad4;
+	    __u8 scca_cmd;	/* SCC A command reg */
+	    __u8 pad5;
+	    __u8 sccb_data;	/* SCC B data */
+	    __u8 pad6;
+	    __u8 scca_data;	/* SCC A data */
+	} scc_regs;
+
+	struct {		/* ISM registers */
+	    __u8 wdata;		/* write a data byte */
+	    __u8 pad7;
+	    __u8 wmark;		/* write a mark byte */
+	    __u8 pad8;
+	    __u8 wcrc;		/* write 2-byte crc to disk */
+	    __u8 pad9;
+	    __u8 wparams;	/* write the param regs */
+	    __u8 pad10;
+	    __u8 wphase;	/* write the phase states & dirs */
+	    __u8 pad11;
+	    __u8 wsetup;	/* write the setup register */
+	    __u8 pad12;
+	    __u8 wzeroes;	/* mode reg: 1's clr bits, 0's are x */
+	    __u8 pad13;
+	    __u8 wones;		/* mode reg: 1's set bits, 0's are x */
+	    __u8 pad14;
+	    __u8 rdata;		/* read a data byte */
+	    __u8 pad15;
+	    __u8 rmark;		/* read a mark byte */
+	    __u8 pad16;
+	    __u8 rerror;	/* read the error register */
+	    __u8 pad17;
+	    __u8 rparams;	/* read the param regs */
+	    __u8 pad18;
+	    __u8 rphase;	/* read the phase states & dirs */
+	    __u8 pad19;
+	    __u8 rsetup;	/* read the setup register */
+	    __u8 pad20;
+	    __u8 rmode;		/* read the mode register */
+	    __u8 pad21;
+	    __u8 rhandshake;	/* read the handshake register */
+	} ism_regs;
+    } b;
+};
+
+/* This structure is used to track IOP messages in the Linux kernel */
+
+struct iop_msg {
+	struct iop_msg	*next;		/* next message in queue or NULL     */
+	uint	iop_num;		/* IOP number                        */
+	uint	channel;		/* channel number                    */
+	void	*caller_priv;		/* caller private data               */
+	int	status;			/* status of this message            */
+	__u8	message[IOP_MSG_LEN];	/* the message being sent/received   */
+	__u8	reply[IOP_MSG_LEN];	/* the reply to the message          */
+	void	(*handler)(struct iop_msg *, struct pt_regs *);
+					/* function to call when reply recvd */
+};
+
+extern int iop_scc_present,iop_ism_present;
+
+extern int iop_listen(uint, uint,
+			void (*handler)(struct iop_msg *, struct pt_regs *),
+			const char *);
+extern int iop_send_message(uint, uint, void *, uint, __u8 *,
+			    void (*)(struct iop_msg *, struct pt_regs *));
+extern void iop_complete_message(struct iop_msg *);
+extern void iop_upload_code(uint, __u8 *, uint, __u16);
+extern void iop_download_code(uint, __u8 *, uint, __u16);
+extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
+
+#endif /* __ASSEMBLY__ */
diff --git a/include/asm-m68k/mac_mouse.h b/include/asm-m68k/mac_mouse.h
new file mode 100644
index 000000000000..39a5c292eaee
--- /dev/null
+++ b/include/asm-m68k/mac_mouse.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_MAC_MOUSE_H
+#define _ASM_MAC_MOUSE_H
+
+/*
+ * linux/include/asm-m68k/mac_mouse.h
+ * header file for Macintosh ADB mouse driver
+ * 27-10-97 Michael Schmitz
+ * copied from:
+ * header file for Atari Mouse driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+struct mouse_status {
+	char		buttons;
+	short		dx;
+	short		dy;
+	int		ready;
+	int		active;
+	wait_queue_head_t wait;
+	struct fasync_struct *fasyncptr;
+};
+
+#endif
diff --git a/include/asm-m68k/mac_oss.h b/include/asm-m68k/mac_oss.h
new file mode 100644
index 000000000000..7644a639cd6c
--- /dev/null
+++ b/include/asm-m68k/mac_oss.h
@@ -0,0 +1,94 @@
+/*
+ *	OSS
+ *
+ *	This is used in place of VIA2 on the IIfx.
+ */
+
+#define OSS_BASE	(0x50f1a000)
+
+/*
+ * Interrupt level offsets for mac_oss->irq_level
+ */
+
+#define OSS_NUBUS0	0
+#define OSS_NUBUS1	1
+#define OSS_NUBUS2	2
+#define OSS_NUBUS3	3
+#define OSS_NUBUS4	4
+#define OSS_NUBUS5	5
+#define OSS_IOPISM	6
+#define OSS_IOPSCC	7
+#define OSS_SOUND	8
+#define OSS_SCSI	9
+#define OSS_60HZ	10
+#define OSS_VIA1	11
+#define OSS_UNUSED1	12
+#define OSS_UNUSED2	13
+#define OSS_PARITY	14
+#define OSS_UNUSED3	15
+
+#define OSS_NUM_SOURCES	16
+
+/*
+ * Pending interrupt bits in mac_oss->irq_pending
+ */
+
+#define OSS_IP_NUBUS0	0x0001
+#define OSS_IP_NUBUS1	0x0002
+#define OSS_IP_NUBUS2	0x0004
+#define OSS_IP_NUBUS3	0x0008
+#define OSS_IP_NUBUS4	0x0010
+#define OSS_IP_NUBUS5	0x0020
+#define OSS_IP_IOPISM	0x0040
+#define OSS_IP_IOPSCC	0x0080
+#define OSS_IP_SOUND	0x0100
+#define OSS_IP_SCSI	0x0200
+#define OSS_IP_60HZ	0x0400
+#define OSS_IP_VIA1	0x0800
+#define OSS_IP_UNUSED1	0x1000
+#define OSS_IP_UNUSED2	0x2000
+#define OSS_IP_PARITY	0x4000
+#define OSS_IP_UNUSED3	0x8000
+
+#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5)
+
+/*
+ * Rom Control Register
+ */
+
+#define OSS_POWEROFF	0x80
+
+/*
+ * OSS Interrupt levels for various sub-systems
+ *
+ * This mapping is layed out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
+ */
+
+#define OSS_IRQLEV_DISABLED	0
+#define OSS_IRQLEV_IOPISM	1	/* ADB? */
+#define OSS_IRQLEV_SCSI		2
+#define OSS_IRQLEV_NUBUS	3	/* keep this on its own level */
+#define OSS_IRQLEV_IOPSCC	4	/* matches VIA alternate mapping */
+#define OSS_IRQLEV_SOUND	5	/* matches VIA alternate mapping */
+#define OSS_IRQLEV_60HZ		6	/* matches VIA alternate mapping */
+#define OSS_IRQLEV_VIA1		6	/* matches VIA alternate mapping */
+#define OSS_IRQLEV_PARITY	7	/* matches VIA alternate mapping */
+
+#ifndef __ASSEMBLY__
+
+struct mac_oss {
+    __u8  irq_level[0x10];	/* [0x000-0x00f] Interrupt levels */
+    __u8  padding0[0x1F2];	/* [0x010-0x201] IO space filler */
+    __u16 irq_pending;		/* [0x202-0x203] pending interrupts bits */
+    __u8  rom_ctrl;		/* [0x204-0x204] ROM cntl reg (for poweroff) */
+    __u8  padding1[0x2];	/* [0x205-0x206] currently unused by A/UX */
+    __u8  ack_60hz;		/* [0x207-0x207] 60 Hz ack. */
+};
+
+extern volatile struct mac_oss *oss;
+extern int oss_present;
+
+#endif /* __ASSEMBLY__ */
diff --git a/include/asm-m68k/mac_psc.h b/include/asm-m68k/mac_psc.h
new file mode 100644
index 000000000000..7808bb0b2323
--- /dev/null
+++ b/include/asm-m68k/mac_psc.h
@@ -0,0 +1,248 @@
+/*
+ * Apple Peripheral System Controller (PSC)
+ *
+ * The PSC is used on the AV Macs to control IO functions not handled
+ * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
+ * channels.
+ *
+ * The first seven DMA channels appear to be "one-shot" and are actually
+ * sets of two channels; one member is active while the other is being
+ * configured, and then you flip the active member and start all over again.
+ * The one-shot channels are grouped together and are:
+ *
+ * 1. SCSI
+ * 2. Ethernet Read
+ * 3. Ethernet Write
+ * 4. Floppy Disk Controller
+ * 5. SCC Channel A Receive
+ * 6. SCC Channel B Receive
+ * 7. SCC Channel A Transmit
+ *
+ * The remaining two channels are handled somewhat differently. They appear
+ * to be closely tied and share one set of registers. They also seem to run
+ * continuously, although how you keep the buffer filled in this scenario is
+ * not understood as there seems to be only one input and one output buffer
+ * pointer.
+ *
+ * Much of this was extrapolated from what was known about the Ethernet
+ * registers and subsequently confirmed using MacsBug (ie by pinging the
+ * machine with easy-to-find patterns and looking for them in the DMA
+ * buffers, or by sending a file over the serial ports and finding the
+ * file in the buffers.)
+ *
+ * 1999-05-25 (jmt)
+ */
+
+#define PSC_BASE	(0x50F31000)
+
+/*
+ * The IER/IFR registers work like the VIA, except that it has 4
+ * of them each on different interrupt levels, and each register
+ * set only seems to handle four interrupts instead of seven.
+ *
+ * To access a particular set of registers, add 0xn0 to the base
+ * where n = 3,4,5 or 6.
+ */
+
+#define pIFRbase	0x100
+#define pIERbase	0x104
+
+/*
+ * One-shot DMA control registers
+ */
+
+#define PSC_MYSTERY	0x804
+
+#define PSC_CTL_BASE	0xC00
+
+#define PSC_SCSI_CTL	0xC00
+#define PSC_ENETRD_CTL  0xC10
+#define PSC_ENETWR_CTL  0xC20
+#define PSC_FDC_CTL	0xC30
+#define PSC_SCCA_CTL	0xC40
+#define PSC_SCCB_CTL	0xC50
+#define PSC_SCCATX_CTL	0xC60
+
+/*
+ * DMA channels. Add +0x10 for the second channel in the set.
+ * You're supposed to use one channel while the other runs and
+ * then flip channels and do the whole thing again.
+ */
+
+#define PSC_ADDR_BASE	0x1000
+#define PSC_LEN_BASE	0x1004
+#define PSC_CMD_BASE	0x1008
+
+#define PSC_SET0	0x00
+#define PSC_SET1	0x10
+
+#define PSC_SCSI_ADDR	0x1000	/* confirmed */
+#define PSC_SCSI_LEN	0x1004	/* confirmed */
+#define PSC_SCSI_CMD	0x1008	/* confirmed */
+#define PSC_ENETRD_ADDR 0x1020	/* confirmed */
+#define PSC_ENETRD_LEN  0x1024	/* confirmed */
+#define PSC_ENETRD_CMD  0x1028	/* confirmed */
+#define PSC_ENETWR_ADDR 0x1040	/* confirmed */
+#define PSC_ENETWR_LEN  0x1044	/* confirmed */
+#define PSC_ENETWR_CMD  0x1048	/* confirmed */
+#define PSC_FDC_ADDR	0x1060	/* strongly suspected */
+#define PSC_FDC_LEN	0x1064	/* strongly suspected */
+#define PSC_FDC_CMD	0x1068	/* strongly suspected */
+#define PSC_SCCA_ADDR	0x1080	/* confirmed */
+#define PSC_SCCA_LEN	0x1084	/* confirmed */
+#define PSC_SCCA_CMD	0x1088	/* confirmed */
+#define PSC_SCCB_ADDR	0x10A0	/* confirmed */
+#define PSC_SCCB_LEN	0x10A4	/* confirmed */
+#define PSC_SCCB_CMD	0x10A8	/* confirmed */
+#define PSC_SCCATX_ADDR	0x10C0	/* confirmed */
+#define PSC_SCCATX_LEN	0x10C4	/* confirmed */
+#define PSC_SCCATX_CMD	0x10C8	/* confirmed */
+
+/*
+ * Free-running DMA registers. The only part known for sure are the bits in
+ * the control register, the buffer addresses and the buffer length. Everything
+ * else is anybody's guess.
+ *
+ * These registers seem to be mirrored every thirty-two bytes up until offset
+ * 0x300. It's safe to assume then that a new set of registers starts there.
+ */
+
+#define PSC_SND_CTL	0x200	/*
+				 * [ 16-bit ]
+				 * Sound (Singer?) control register.
+				 *
+				 * bit 0  : ????
+				 * bit 1  : ????
+				 * bit 2  : Set to one to enable sound
+				 *          output. Possibly a mute flag.
+				 * bit 3  : ????
+				 * bit 4  : ????
+				 * bit 5  : ????
+				 * bit 6  : Set to one to enable pass-thru
+				 *          audio. In this mode the audio data
+				 *          seems to appear in both the input
+				 *          buffer and the output buffer.
+				 * bit 7  : Set to one to activate the
+				 *          sound input DMA or zero to
+				 *          disable it.
+				 * bit 8  : Set to one to activate the
+				 *          sound output DMA or zero to
+				 *          disable it.
+				 * bit 9  : \
+				 * bit 11 :  |
+				 *          These two bits control the sample
+				 *          rate. Usually set to binary 10 and
+				 *	    MacOS 8.0 says I'm at 48 KHz. Using
+				 *	    a binary value of 01 makes things
+				 *	    sound about 1/2 speed (24 KHz?) and
+				 *          binary 00 is slower still (22 KHz?)
+				 *
+				 * Setting this to 0x0000 is a good way to
+				 * kill all DMA at boot time so that the
+				 * PSC won't overwrite the kernel image
+				 * with sound data.
+				 */
+
+/*
+ * 0x0202 - 0x0203 is unused. Writing there
+ * seems to clobber the control register.
+ */
+
+#define PSC_SND_SOURCE	0x204	/*
+				 * [ 32-bit ]
+				 * Controls input source and volume:
+				 *
+				 * bits 12-15 : input source volume, 0 - F
+				 * bits 16-19 : unknown, always 0x5
+				 * bits 20-23 : input source selection:
+				 *                  0x3 = CD Audio
+				 *                  0x4 = External Audio
+				 *
+				 * The volume is definitely not the general
+				 * output volume as it doesn't affect the
+				 * alert sound volume.
+				 */
+#define PSC_SND_STATUS1	0x208	/*
+				 * [ 32-bit ]
+				 * Appears to be a read-only status register.
+				 * The usual value is 0x00400002.
+				 */
+#define PSC_SND_HUH3	0x20C	/*
+				 * [ 16-bit ]
+				 * Unknown 16-bit value, always 0x0000.
+				 */
+#define PSC_SND_BITS2GO	0x20E	/*
+				 * [ 16-bit ]
+				 * Counts down to zero from some constant
+				 * value. The value appears to be the
+				 * number of _bits_ remaining before the
+				 * buffer is full, which would make sense
+				 * since Apple's docs say the sound DMA
+				 * channels are 1 bit wide.
+				 */
+#define PSC_SND_INADDR	0x210	/*
+				 * [ 32-bit ]
+				 * Address of the sound input DMA buffer
+				 */
+#define PSC_SND_OUTADDR	0x214	/*
+				 * [ 32-bit ]
+				 * Address of the sound output DMA buffer
+				 */
+#define PSC_SND_LEN	0x218	/*
+				 * [ 16-bit ]
+				 * Length of both buffers in eight-byte units.
+				 */
+#define PSC_SND_HUH4	0x21A	/*
+				 * [ 16-bit ]
+				 * Unknown, always 0x0000.
+				 */
+#define PSC_SND_STATUS2	0x21C	/*
+				 * [ 16-bit ]
+				 * Appears to e a read-only status register.
+				 * The usual value is 0x0200.
+				 */
+#define PSC_SND_HUH5	0x21E	/*
+				 * [ 16-bit ]
+				 * Unknown, always 0x0000.
+				 */
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *psc;
+extern int psc_present;
+
+/*
+ *	Access functions
+ */
+
+static inline void psc_write_byte(int offset, __u8 data)
+{
+	*((volatile __u8 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_word(int offset, __u16 data)
+{
+	*((volatile __u16 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_long(int offset, __u32 data)
+{
+	*((volatile __u32 *)(psc + offset)) = data;
+}
+
+static inline u8 psc_read_byte(int offset)
+{
+	return *((volatile __u8 *)(psc + offset));
+}
+
+static inline u16 psc_read_word(int offset)
+{
+	return *((volatile __u16 *)(psc + offset));
+}
+
+static inline u32 psc_read_long(int offset)
+{
+	return *((volatile __u32 *)(psc + offset));
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/include/asm-m68k/mac_via.h b/include/asm-m68k/mac_via.h
new file mode 100644
index 000000000000..59b758cd16ad
--- /dev/null
+++ b/include/asm-m68k/mac_via.h
@@ -0,0 +1,268 @@
+/*
+ *	6522 Versatile Interface Adapter (VIA)
+ *
+ *	There are two of these on the Mac II. Some IRQ's are vectored
+ *	via them as are assorted bits and bobs - eg rtc, adb. The picture
+ *	is a bit incomplete as the Mac documentation doesn't cover this well
+ */
+
+#ifndef _ASM_MAC_VIA_H_
+#define _ASM_MAC_VIA_H_
+
+/*
+ * Base addresses for the VIAs. There are two in every machine,
+ * although on some machines the second is an RBV or an OSS.
+ * The OSS is different enough that it's handled separately.
+ *
+ * Do not use these values directly; use the via1 and via2 variables
+ * instead (and don't forget to check rbv_present when using via2!)
+ */
+
+#define VIA1_BASE	(0x50F00000)
+#define VIA2_BASE	(0x50F02000)
+#define  RBV_BASE	(0x50F26000)
+
+/*
+ *	Not all of these are true post MacII I think.
+ *      CSA: probably the ones CHRP marks as 'unused' change purposes
+ *      when the IWM becomes the SWIM.
+ *      http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
+ *      ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
+ *
+ * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
+ * following changes for IIfx:
+ * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
+ * Also, "All of the functionality of VIA2 has been moved to other chips".
+ */
+
+#define VIA1A_vSccWrReq	0x80	/* SCC write. (input)
+				 * [CHRP] SCC WREQ: Reflects the state of the
+				 * Wait/Request pins from the SCC.
+				 * [Macintosh Family Hardware]
+				 * as CHRP on SE/30,II,IIx,IIcx,IIci.
+				 * on IIfx, "0 means an active request"
+				 */
+#define VIA1A_vRev8	0x40	/* Revision 8 board ???
+                                 * [CHRP] En WaitReqB: Lets the WaitReq_L
+				 * signal from port B of the SCC appear on
+				 * the PA7 input pin. Output.
+				 * [Macintosh Family] On the SE/30, this
+				 * is the bit to flip screen buffers.
+				 * 0=alternate, 1=main.
+				 * on II,IIx,IIcx,IIci,IIfx this is a bit
+				 * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
+				 */
+#define VIA1A_vHeadSel	0x20	/* Head select for IWM.
+				 * [CHRP] unused.
+				 * [Macintosh Family] "Floppy disk
+				 * state-control line SEL" on all but IIfx
+				 */
+#define VIA1A_vOverlay	0x10    /* [Macintosh Family] On SE/30,II,IIx,IIcx
+				 * this bit enables the "Overlay" address
+				 * map in the address decoders as it is on
+				 * reset for mapping the ROM over the reset
+				 * vector. 1=use overlay map.
+				 * On the IIci,IIfx it is another bit of the
+				 * CPU ID: 0=normal IIci, 1=IIci with parity
+				 * feature or IIfx.
+				 * [CHRP] En WaitReqA: Lets the WaitReq_L
+				 * signal from port A of the SCC appear
+				 * on the PA7 input pin (CHRP). Output.
+				 * [MkLinux] "Drive Select"
+				 *  (with 0x20 being 'disk head select')
+				 */
+#define VIA1A_vSync	0x08    /* [CHRP] Sync Modem: modem clock select:
+                                 * 1: select the external serial clock to
+				 *    drive the SCC's /RTxCA pin.
+				 * 0: Select the 3.6864MHz clock to drive
+				 *    the SCC cell.
+				 * [Macintosh Family] Correct on all but IIfx
+				 */
+
+/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
+ * on Macs which had the PWM sound hardware.  Reserved on newer models.
+ * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
+ * bit 2: 1=IIci, 0=IIfx
+ * bit 1: 1 on both IIci and IIfx.
+ * MkLinux sez bit 0 is 'burnin flag' in this case.
+ * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
+ * inputs, these bits will read 0.
+ */
+#define VIA1A_vVolume	0x07	/* Audio volume mask for PWM */
+#define VIA1A_CPUID0	0x02	/* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID1	0x04	/* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID2	0x10	/* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID3	0x40	/* CPU id bit 0 on RBV, others */
+
+/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
+ * CHRP offers no info. */
+#define VIA1B_vSound	0x80	/* Sound enable (for compatibility with
+				 * PWM hardware) 0=enabled.
+				 * Also, on IIci w/parity, shows parity error
+				 * 0=error, 1=OK. */
+#define VIA1B_vMystery	0x40    /* On IIci, parity enable. 0=enabled,1=disabled
+				 * On SE/30, vertical sync interrupt enable.
+				 * 0=enabled. This vSync interrupt shows up
+				 * as a slot $E interrupt. */
+#define VIA1B_vADBS2	0x20	/* ADB state input bit 1 (unused on IIfx) */
+#define VIA1B_vADBS1	0x10	/* ADB state input bit 0 (unused on IIfx) */
+#define VIA1B_vADBInt	0x08	/* ADB interrupt 0=interrupt (unused on IIfx)*/
+#define VIA1B_vRTCEnb	0x04	/* Enable Real time clock. 0=enabled. */
+#define VIA1B_vRTCClk	0x02    /* Real time clock serial-clock line. */
+#define VIA1B_vRTCData	0x01    /* Real time clock serial-data line. */
+
+/* MkLinux defines the following "VIA1 Register B contents where they
+ * differ from standard VIA1".  From the naming scheme, we assume they
+ * correspond to a VIA work-alike named 'EVR'. */
+#define	EVRB_XCVR	0x08	/* XCVR_SESSION* */
+#define	EVRB_FULL	0x10	/* VIA_FULL */
+#define	EVRB_SYSES	0x20	/* SYS_SESSION */
+#define	EVRB_AUXIE	0x00	/* Enable A/UX Interrupt Scheme */
+#define	EVRB_AUXID	0x40	/* Disable A/UX Interrupt Scheme */
+#define	EVRB_SFTWRIE	0x00	/* Software Interrupt ReQuest */
+#define	EVRB_SFTWRID	0x80	/* Software Interrupt ReQuest */
+
+/*
+ *	VIA2 A register is the interrupt lines raised off the nubus
+ *	slots.
+ *      The below info is from 'Macintosh Family Hardware.'
+ *      MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
+ *      It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
+ *      defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
+ *      Perhaps OSS uses vRAM1 and vRAM2 for ADB.
+ */
+
+#define VIA2A_vRAM1	0x80	/* RAM size bit 1 (IIci: reserved) */
+#define VIA2A_vRAM0	0x40	/* RAM size bit 0 (IIci: internal video IRQ) */
+#define VIA2A_vIRQE	0x20	/* IRQ from slot $E */
+#define VIA2A_vIRQD	0x10	/* IRQ from slot $D */
+#define VIA2A_vIRQC	0x08	/* IRQ from slot $C */
+#define VIA2A_vIRQB	0x04	/* IRQ from slot $B */
+#define VIA2A_vIRQA	0x02	/* IRQ from slot $A */
+#define VIA2A_vIRQ9	0x01	/* IRQ from slot $9 */
+
+/* RAM size bits decoded as follows:
+ * bit1 bit0  size of ICs in bank A
+ *  0    0    256 kbit
+ *  0    1    1 Mbit
+ *  1    0    4 Mbit
+ *  1    1   16 Mbit
+ */
+
+/*
+ *	Register B has the fun stuff in it
+ */
+
+#define VIA2B_vVBL	0x80	/* VBL output to VIA1 (60.15Hz) driven by
+				 * timer T1.
+				 * on IIci, parity test: 0=test mode.
+				 * [MkLinux] RBV_PARODD: 1=odd,0=even. */
+#define VIA2B_vSndJck	0x40	/* External sound jack status.
+				 * 0=plug is inserted.  On SE/30, always 0 */
+#define VIA2B_vTfr0	0x20	/* Transfer mode bit 0 ack from NuBus */
+#define VIA2B_vTfr1	0x10	/* Transfer mode bit 1 ack from NuBus */
+#define VIA2B_vMode32	0x08	/* 24/32bit switch - doubles as cache flush
+				 * on II, AMU/PMMU control.
+				 *   if AMU, 0=24bit to 32bit translation
+				 *   if PMMU, 1=PMMU is accessing page table.
+				 * on SE/30 tied low.
+				 * on IIx,IIcx,IIfx, unused.
+				 * on IIci/RBV, cache control. 0=flush cache.
+				 */
+#define VIA2B_vPower	0x04	/* Power off, 0=shut off power.
+				 * on SE/30 this signal sent to PDS card. */
+#define VIA2B_vBusLk	0x02	/* Lock NuBus transactions, 0=locked.
+				 * on SE/30 sent to PDS card. */
+#define VIA2B_vCDis	0x01	/* Cache control. On IIci, 1=disable cache card
+				 * on others, 0=disable processor's instruction
+				 * and data caches. */
+
+/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
+ * Another example of a valid function that has no ROM support is the use
+ * of the alternate video page for page-flipping animation. Since there
+ * is no ROM call to flip pages, it is necessary to go play with the
+ * right bit in the VIA chip (6522 Versatile Interface Adapter).
+ * [CSA: don't know which one this is, but it's one of 'em!]
+ */
+
+/*
+ *	6522 registers - see databook.
+ * CSA: Assignments for VIA1 confirmed from CHRP spec.
+ */
+
+/* partial address decode.  0xYYXX : XX part for RBV, YY part for VIA */
+/* Note: 15 VIA regs, 8 RBV regs */
+
+#define vBufB	0x0000	/* [VIA/RBV]  Register B */
+#define vBufAH	0x0200  /* [VIA only] Buffer A, with handshake. DON'T USE! */
+#define vDirB	0x0400  /* [VIA only] Data Direction Register B. */
+#define vDirA	0x0600  /* [VIA only] Data Direction Register A. */
+#define vT1CL	0x0800  /* [VIA only] Timer one counter low. */
+#define vT1CH	0x0a00  /* [VIA only] Timer one counter high. */
+#define vT1LL	0x0c00  /* [VIA only] Timer one latches low. */
+#define vT1LH	0x0e00  /* [VIA only] Timer one latches high. */
+#define vT2CL	0x1000  /* [VIA only] Timer two counter low. */
+#define vT2CH	0x1200  /* [VIA only] Timer two counter high. */
+#define vSR	0x1400  /* [VIA only] Shift register. */
+#define vACR	0x1600  /* [VIA only] Auxilary control register. */
+#define vPCR	0x1800  /* [VIA only] Peripheral control register. */
+                        /*            CHRP sez never ever to *write* this.
+			 *            Mac family says never to *change* this.
+			 * In fact we need to initialize it once at start. */
+#define vIFR	0x1a00  /* [VIA/RBV]  Interrupt flag register. */
+#define vIER	0x1c00  /* [VIA/RBV]  Interrupt enable register. */
+#define vBufA	0x1e00  /* [VIA/RBV] register A (no handshake) */
+
+/* The RBV only decodes the bottom eight address lines; the VIA doesn't
+ * decode the bottom eight -- so vBufB | rBufB will always get you BufB */
+/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
+ * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
+ * to matter.  In fact *all* of the top 8 bits seem to matter;
+ * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
+ * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
+ */
+
+#define rBufB   0x0000  /* [VIA/RBV]  Register B */
+#define rExp	0x0001	/* [RBV only] RBV future expansion (always 0) */
+#define rSIFR	0x0002  /* [RBV only] RBV slot interrupts register. */
+#define rIFR	0x1a03  /* [VIA/RBV]  RBV interrupt flag register. */
+#define rMonP   0x0010  /* [RBV only] RBV video monitor type. */
+#define rChpT   0x0011  /* [RBV only] RBV test mode register (reads as 0). */
+#define rSIER   0x0012  /* [RBV only] RBV slot interrupt enables. */
+#define rIER    0x1c13  /* [VIA/RBV]  RBV interrupt flag enable register. */
+#define rBufA	rSIFR   /* the 'slot interrupts register' is BufA on a VIA */
+
+/*
+ * Video monitor parameters, for rMonP:
+ */
+#define RBV_DEPTH  0x07	/* bits per pixel: 000=1,001=2,010=4,011=8 */
+#define RBV_MONID  0x38	/* monitor type, as below. */
+#define RBV_VIDOFF 0x40	/* 1 turns off onboard video */
+/* Supported monitor types: */
+#define MON_15BW   (1<<3) /* 15" BW portrait. */
+#define MON_IIGS   (2<<3) /* 12" color (modified IIGS monitor). */
+#define MON_15RGB  (5<<3) /* 15" RGB portrait. */
+#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
+#define MON_NONE   (7<<3) /* No monitor attached. */
+
+/* To clarify IER manipulations */
+#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
+#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *via1,*via2;
+extern int rbv_present,via_alt_mapping;
+extern __u8 rbv_clear;
+
+static inline int rbv_set_video_bpp(int bpp)
+{
+	char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
+	if (!rbv_present || val<0) return -1;
+	via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
+	return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MAC_VIA_H_ */
diff --git a/include/asm-m68k/machdep.h b/include/asm-m68k/machdep.h
new file mode 100644
index 000000000000..a0dd5c47002c
--- /dev/null
+++ b/include/asm-m68k/machdep.h
@@ -0,0 +1,42 @@
+#ifndef _M68K_MACHDEP_H
+#define _M68K_MACHDEP_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+struct pt_regs;
+struct mktime;
+struct rtc_time;
+struct rtc_pll_info;
+struct buffer_head;
+
+extern void (*mach_sched_init) (irqreturn_t (*handler)(int, void *, struct pt_regs *));
+/* machine dependent irq functions */
+extern void (*mach_init_IRQ) (void);
+extern irqreturn_t (*(*mach_default_handler)[]) (int, void *, struct pt_regs *);
+extern int (*mach_request_irq) (unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
+                                unsigned long flags, const char *devname, void *dev_id);
+extern void (*mach_free_irq) (unsigned int irq, void *dev_id);
+extern void (*mach_get_model) (char *model);
+extern int (*mach_get_hardware_list) (char *buffer);
+extern int (*mach_get_irq_list) (struct seq_file *p, void *v);
+extern irqreturn_t (*mach_process_int) (int irq, struct pt_regs *fp);
+/* machine dependent timer functions */
+extern unsigned long (*mach_gettimeoffset)(void);
+extern int (*mach_hwclk)(int, struct rtc_time*);
+extern unsigned int (*mach_get_ss)(void);
+extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_clock_mmss)(unsigned long);
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
+extern void (*mach_hd_setup)(char *, int *);
+extern long mach_max_dma_address;
+extern void (*mach_floppy_setup)(char *, int *);
+extern void (*mach_heartbeat) (int);
+extern void (*mach_l2_flush) (int);
+extern void (*mach_beep) (unsigned int, unsigned int);
+
+#endif /* _M68K_MACHDEP_H */
diff --git a/include/asm-m68k/machines.h b/include/asm-m68k/machines.h
new file mode 100644
index 000000000000..da6015a90f24
--- /dev/null
+++ b/include/asm-m68k/machines.h
@@ -0,0 +1,87 @@
+/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+	char *name;
+	unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+// reduced along with table in arch/m68k/sun3/idprom.c
+// sun3 port doesn't need to know about sparc machines.
+//#define NUM_SUN_MACHINES   23
+#define NUM_SUN_MACHINES  8
+
+extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN3       0x10
+#define SM_SUN4       0x20
+#define SM_SUN3X      0x40
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun3 machines */
+#define SM_3_160      0x01    /* Sun 3/160 series */
+#define SM_3_50       0x02    /* Sun 3/50 series */
+#define SM_3_260      0x03    /* Sun 3/260 series */
+#define SM_3_110      0x04    /* Sun 3/110 series */
+#define SM_3_60       0x07    /* Sun 3/60 series */
+#define SM_3_E        0x08    /* Sun 3/E series */
+
+/* Sun3x machines */
+#define SM_3_460      0x01    /* Sun 3/460 (460,470,480) series */
+#define SM_3_80       0x02    /* Sun 3/80 series */
+
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h
new file mode 100644
index 000000000000..d2e0e25d5c90
--- /dev/null
+++ b/include/asm-m68k/machw.h
@@ -0,0 +1,101 @@
+/*
+** linux/machw.h -- This header defines some macros and pointers for
+**                    the various Macintosh custom hardware registers.
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACHW_H_
+#define _ASM_MACHW_H_
+
+/*
+ * head.S maps the videomem to VIDEOMEMBASE
+ */
+
+#define VIDEOMEMBASE	0xf0000000
+#define VIDEOMEMSIZE	(4096*1024)
+#define VIDEOMEMMASK	(-4096*1024)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#if 0
+/* Mac SCSI Controller 5380 */
+
+#define	MAC_5380_BAS	(0x50F10000) /* This is definitely wrong!! */
+struct MAC_5380 {
+	u_char	scsi_data;
+	u_char	char_dummy1;
+	u_char	scsi_icr;
+	u_char	char_dummy2;
+	u_char	scsi_mode;
+	u_char	char_dummy3;
+	u_char	scsi_tcr;
+	u_char	char_dummy4;
+	u_char	scsi_idstat;
+	u_char	char_dummy5;
+	u_char	scsi_dmastat;
+	u_char	char_dummy6;
+	u_char	scsi_targrcv;
+	u_char	char_dummy7;
+	u_char	scsi_inircv;
+};
+#define	mac_scsi       ((*(volatile struct MAC_5380 *)MAC_5380_BAS))
+
+/*
+** SCC Z8530
+*/
+
+#define MAC_SCC_BAS (0x50F04000)
+struct MAC_SCC
+ {
+  u_char cha_a_ctrl;
+  u_char char_dummy1;
+  u_char cha_a_data;
+  u_char char_dummy2;
+  u_char cha_b_ctrl;
+  u_char char_dummy3;
+  u_char cha_b_data;
+ };
+# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
+#endif
+
+/* hardware stuff */
+
+#define MACHW_DECLARE(name)	unsigned name : 1
+#define MACHW_SET(name)		(mac_hw_present.name = 1)
+#define MACHW_PRESENT(name)	(mac_hw_present.name)
+
+struct mac_hw_present {
+  /* video hardware */
+  /* sound hardware */
+  /* disk storage interfaces */
+  MACHW_DECLARE(MAC_SCSI_80);     /* Directly mapped NCR5380 */
+  MACHW_DECLARE(MAC_SCSI_96);     /* 53c9[46] */
+  MACHW_DECLARE(MAC_SCSI_96_2);   /* 2nd 53c9[46] Q900 and Q950 */
+  MACHW_DECLARE(IDE);             /* IDE Interface */
+  /* other I/O hardware */
+  MACHW_DECLARE(SCC);             /* Serial Communications Contr. */
+  /* DMA */
+  MACHW_DECLARE(SCSI_DMA);        /* DMA for the NCR5380 */
+  /* real time clocks */
+  MACHW_DECLARE(RTC_CLK);         /* clock chip */
+  /* supporting hardware */
+  MACHW_DECLARE(VIA1);            /* Versatile Interface Ad. 1 */
+  MACHW_DECLARE(VIA2);            /* Versatile Interface Ad. 2 */
+  MACHW_DECLARE(RBV);             /* Versatile Interface Ad. 2+ */
+  /* NUBUS */
+  MACHW_DECLARE(NUBUS);           /* NUBUS */
+};
+
+extern struct mac_hw_present mac_hw_present;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* linux/machw.h */
diff --git a/include/asm-m68k/macintosh.h b/include/asm-m68k/macintosh.h
new file mode 100644
index 000000000000..6fc3d19512d1
--- /dev/null
+++ b/include/asm-m68k/macintosh.h
@@ -0,0 +1,152 @@
+#ifndef __ASM_MACINTOSH_H
+#define __ASM_MACINTOSH_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+/*
+ *	Apple Macintoshisms
+ */
+
+extern void mac_reset(void);
+extern void mac_poweroff(void);
+extern void mac_init_IRQ(void);
+extern int mac_request_irq (unsigned int, irqreturn_t (*)(int, void *,
+				struct pt_regs *),
+				unsigned long, const char *, void *);
+extern void mac_free_irq(unsigned int, void *);
+extern void mac_enable_irq(unsigned int);
+extern void mac_disable_irq(unsigned int);
+extern int mac_irq_pending(unsigned int);
+extern int show_mac_interrupts(struct seq_file *, void *);
+#if 0
+extern void mac_default_handler(int irq);
+#endif
+extern void mac_identify(void);
+extern void mac_report_hardware(void);
+extern void mac_debugging_penguin(int);
+extern void mac_boom(int);
+
+/*
+ *	Floppy driver magic hook - probably shouldnt be here
+ */
+
+extern void via1_set_head(int);
+
+extern void parse_booter(char *ptr);
+extern void print_booter(char *ptr);
+
+/*
+ *	Macintosh Table
+ */
+
+struct mac_model
+{
+	short ident;
+	char *name;
+	char adb_type;
+	char via_type;
+	char scsi_type;
+	char ide_type;
+	char scc_type;
+	char ether_type;
+	char nubus_type;
+};
+
+#define MAC_ADB_NONE		0
+#define MAC_ADB_II		1
+#define MAC_ADB_IISI		2
+#define MAC_ADB_CUDA		3
+#define MAC_ADB_PB1		4
+#define MAC_ADB_PB2		5
+#define MAC_ADB_IOP		6
+
+#define MAC_VIA_II		1
+#define MAC_VIA_IIci		2
+#define MAC_VIA_QUADRA		3
+
+#define MAC_SCSI_NONE		0
+#define MAC_SCSI_OLD		1
+#define MAC_SCSI_QUADRA		2
+#define MAC_SCSI_QUADRA2	3
+#define MAC_SCSI_QUADRA3	4
+
+#define MAC_IDE_NONE		0
+#define MAC_IDE_QUADRA		1
+#define MAC_IDE_PB		2
+#define MAC_IDE_BABOON		3
+
+#define MAC_SCC_II		1
+#define MAC_SCC_IOP		2
+#define MAC_SCC_QUADRA		3
+#define MAC_SCC_PSC		4
+
+#define MAC_ETHER_NONE		0
+#define MAC_ETHER_SONIC		1
+#define MAC_ETHER_MACE		2
+
+#define MAC_NO_NUBUS		0
+#define MAC_NUBUS		1
+
+/*
+ *	Gestalt numbers
+ */
+
+#define MAC_MODEL_II		6
+#define MAC_MODEL_IIX		7
+#define MAC_MODEL_IICX		8
+#define MAC_MODEL_SE30		9
+#define MAC_MODEL_IICI		11
+#define MAC_MODEL_IIFX		13	/* And well numbered it is too */
+#define MAC_MODEL_IISI		18
+#define MAC_MODEL_LC		19
+#define MAC_MODEL_Q900		20
+#define MAC_MODEL_PB170		21
+#define MAC_MODEL_Q700		22
+#define MAC_MODEL_CLII		23	/* aka: P200 */
+#define MAC_MODEL_PB140		25
+#define MAC_MODEL_Q950		26	/* aka: WGS95 */
+#define MAC_MODEL_LCIII		27	/* aka: P450 */
+#define MAC_MODEL_PB210		29
+#define MAC_MODEL_C650		30
+#define MAC_MODEL_PB230		32
+#define MAC_MODEL_PB180		33
+#define MAC_MODEL_PB160		34
+#define MAC_MODEL_Q800		35	/* aka: WGS80 */
+#define MAC_MODEL_Q650		36
+#define MAC_MODEL_LCII		37	/* aka: P400/405/410/430 */
+#define MAC_MODEL_PB250		38
+#define MAC_MODEL_IIVI		44
+#define MAC_MODEL_P600		45	/* aka: P600CD */
+#define MAC_MODEL_IIVX		48
+#define MAC_MODEL_CCL		49	/* aka: P250 */
+#define MAC_MODEL_PB165C	50
+#define MAC_MODEL_C610		52	/* aka: WGS60 */
+#define MAC_MODEL_Q610		53
+#define MAC_MODEL_PB145		54	/* aka: PB145B */
+#define MAC_MODEL_P520		56	/* aka: LC520 */
+#define MAC_MODEL_C660		60
+#define MAC_MODEL_P460		62	/* aka: LCIII+, P466/P467 */
+#define MAC_MODEL_PB180C	71
+#define MAC_MODEL_PB520		72	/* aka: PB520C, PB540, PB540C, PB550C */
+#define MAC_MODEL_PB270C	77
+#define MAC_MODEL_Q840		78
+#define MAC_MODEL_P550		80	/* aka: LC550, P560 */
+#define MAC_MODEL_CCLII		83	/* aka: P275 */
+#define MAC_MODEL_PB165		84
+#define MAC_MODEL_PB190		85	/* aka: PB190CS */
+#define MAC_MODEL_TV		88
+#define MAC_MODEL_P475		89	/* aka: LC475, P476 */
+#define MAC_MODEL_P475F		90	/* aka: P475 w/ FPU (no LC040) */
+#define MAC_MODEL_P575		92	/* aka: LC575, P577/P578 */
+#define MAC_MODEL_Q605		94
+#define MAC_MODEL_Q605_ACC	95	/* Q605 accelerated to 33 MHz */
+#define MAC_MODEL_Q630		98	/* aka: LC630, P630/631/635/636/637/638/640 */
+#define MAC_MODEL_P588		99	/* aka: LC580, P580 */
+#define MAC_MODEL_PB280		102
+#define MAC_MODEL_PB280C	103
+#define MAC_MODEL_PB150		115
+
+extern struct mac_model *macintosh_config;
+
+#endif
diff --git a/include/asm-m68k/macints.h b/include/asm-m68k/macints.h
new file mode 100644
index 000000000000..fd8c3a9fea4d
--- /dev/null
+++ b/include/asm-m68k/macints.h
@@ -0,0 +1,169 @@
+/*
+** macints.h -- Macintosh Linux interrupt handling structs and prototypes
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACINTS_H_
+#define _ASM_MACINTS_H_
+
+#include <asm/irq.h>
+
+/* Setting this prints debugging info for unclaimed interrupts */
+
+#define DEBUG_SPURIOUS
+
+/* Setting this prints debugging info on each autovector interrupt */
+
+/* #define DEBUG_IRQS */
+
+/* Setting this prints debugging info on each Nubus interrupt */
+
+/* #define DEBUG_NUBUS_INT */
+
+/* Setting this prints debugging info on irqs as they enabled and disabled. */
+
+/* #define DEBUG_IRQUSE */
+
+/*
+ * Base IRQ number for all Mac68K interrupt sources. Each source
+ * has eight indexes (base -> base+7).
+ */
+
+#define VIA1_SOURCE_BASE	8
+#define VIA2_SOURCE_BASE	16
+#define MAC_SCC_SOURCE_BASE	24
+#define PSC3_SOURCE_BASE	24
+#define PSC4_SOURCE_BASE	32
+#define PSC5_SOURCE_BASE	40
+#define PSC6_SOURCE_BASE	48
+#define NUBUS_SOURCE_BASE	56
+#define BABOON_SOURCE_BASE	64
+
+/*
+ * Maximum IRQ number is BABOON_SOURCE_BASE + 7,
+ * giving us IRQs up through 71
+ */
+
+#define NUM_MAC_SOURCES		72
+
+/*
+ * clean way to separate IRQ into its source and index
+ */
+
+#define IRQ_SRC(irq)	(irq >> 3)
+#define	IRQ_IDX(irq)	(irq & 7)
+
+#define	IRQ_SPURIOUS      (0)
+
+/* auto-vector interrupts */
+#define IRQ_AUTO_1        (1)
+#define IRQ_AUTO_2        (2)
+#define IRQ_AUTO_3        (3)
+#define IRQ_AUTO_4        (4)
+#define IRQ_AUTO_5        (5)
+#define IRQ_AUTO_6        (6)
+#define IRQ_AUTO_7        (7)
+
+/* VIA1 interrupts */
+#define IRQ_VIA1_0	  (8)		/* one second int. */
+#define IRQ_VIA1_1        (9)		/* VBlank int. */
+#define IRQ_MAC_VBL	  IRQ_VIA1_1
+#define IRQ_VIA1_2	  (10)		/* ADB SR shifts complete */
+#define IRQ_MAC_ADB	  IRQ_VIA1_2
+#define IRQ_MAC_ADB_SR	  IRQ_VIA1_2
+#define IRQ_VIA1_3	  (11)		/* ADB SR CB2 ?? */
+#define IRQ_MAC_ADB_SD	  IRQ_VIA1_3
+#define IRQ_VIA1_4        (12)		/* ADB SR ext. clock pulse */
+#define IRQ_MAC_ADB_CL	  IRQ_VIA1_4
+#define IRQ_VIA1_5	  (13)
+#define IRQ_MAC_TIMER_2	  IRQ_VIA1_5
+#define IRQ_VIA1_6	  (14)
+#define IRQ_MAC_TIMER_1	  IRQ_VIA1_6
+#define IRQ_VIA1_7        (15)
+
+/* VIA2/RBV interrupts */
+#define IRQ_VIA2_0	  (16)
+#define IRQ_MAC_SCSIDRQ	  IRQ_VIA2_0
+#define IRQ_VIA2_1        (17)
+#define IRQ_MAC_NUBUS	  IRQ_VIA2_1
+#define IRQ_VIA2_2	  (18)
+#define IRQ_VIA2_3	  (19)
+#define IRQ_MAC_SCSI	  IRQ_VIA2_3
+#define IRQ_VIA2_4        (20)
+#define IRQ_VIA2_5	  (21)
+#define IRQ_VIA2_6	  (22)
+#define IRQ_VIA2_7        (23)
+
+/* Level 3 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC3_0	  (24)
+#define IRQ_MAC_MACE	  IRQ_PSC3_0
+#define IRQ_PSC3_1	  (25)
+#define IRQ_PSC3_2	  (26)
+#define IRQ_PSC3_3	  (27)
+
+/* Level 4 (SCC) interrupts */
+#define IRQ_SCC		     (32)
+#define IRQ_SCCA	     (33)
+#define IRQ_SCCB	     (34)
+#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
+/* SCC interrupts */
+#define IRQ_SCCB_TX	     (32)
+#define IRQ_SCCB_STAT	     (33)
+#define IRQ_SCCB_RX	     (34)
+#define IRQ_SCCB_SPCOND	     (35)
+#define IRQ_SCCA_TX	     (36)
+#define IRQ_SCCA_STAT	     (37)
+#define IRQ_SCCA_RX	     (38)
+#define IRQ_SCCA_SPCOND	     (39)
+#endif
+
+/* Level 4 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC4_0	  (32)
+#define IRQ_PSC4_1	  (33)
+#define IRQ_PSC4_2	  (34)
+#define IRQ_PSC4_3	  (35)
+#define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
+
+/* Level 5 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC5_0	  (40)
+#define IRQ_PSC5_1	  (41)
+#define IRQ_PSC5_2	  (42)
+#define IRQ_PSC5_3	  (43)
+
+/* Level 6 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC6_0	  (48)
+#define IRQ_PSC6_1	  (49)
+#define IRQ_PSC6_2	  (50)
+#define IRQ_PSC6_3	  (51)
+
+/* Nubus interrupts (cascaded to VIA2) */
+#define IRQ_NUBUS_9	  (56)
+#define IRQ_NUBUS_A	  (57)
+#define IRQ_NUBUS_B	  (58)
+#define IRQ_NUBUS_C	  (59)
+#define IRQ_NUBUS_D	  (60)
+#define IRQ_NUBUS_E	  (61)
+#define IRQ_NUBUS_F	  (62)
+
+/* Baboon interrupts (cascaded to nubus slot $C) */
+#define IRQ_BABOON_0	  (64)
+#define IRQ_BABOON_1	  (65)
+#define IRQ_BABOON_2	  (66)
+#define IRQ_BABOON_3	  (67)
+
+#define SLOT2IRQ(x)	  (x + 47)
+#define IRQ2SLOT(x)	  (x - 47)
+
+#define INT_CLK   24576	    /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246	    /* to make sched_time = 99.902... HZ */
+
+extern irq_node_t *mac_irq_list[NUM_MAC_SOURCES];
+extern void mac_do_irq_list(int irq, struct pt_regs *);
+
+#endif /* asm/macints.h */
diff --git a/include/asm-m68k/math-emu.h b/include/asm-m68k/math-emu.h
new file mode 100644
index 000000000000..7ac6259b68df
--- /dev/null
+++ b/include/asm-m68k/math-emu.h
@@ -0,0 +1,300 @@
+#ifndef _ASM_M68K_SETUP_H
+#define _ASM_M68K_SETUP_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX	3
+#define FPSR_AEXC_DZ	4
+#define FPSR_AEXC_UNFL	5
+#define FPSR_AEXC_OVFL	6
+#define FPSR_AEXC_IOP	7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1	8
+#define FPSR_EXC_INEX2	9
+#define FPSR_EXC_DZ	10
+#define FPSR_EXC_UNFL	11
+#define FPSR_EXC_OVFL	12
+#define FPSR_EXC_OPERR	13
+#define FPSR_EXC_SNAN	14
+#define FPSR_EXC_BSUN	15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN	24
+#define FPSR_CC_INF	25
+#define FPSR_CC_Z	26
+#define FPSR_CC_NEG	27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define	FPCR_ROUND_RN	0		/* round to nearest/even */
+#define FPCR_ROUND_RZ	1		/* round to zero */
+#define FPCR_ROUND_RM	2		/* minus infinity */
+#define FPCR_ROUND_RP	3		/* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X	0	/* long double */
+#define FPCR_PRECISION_S	1	/* double */
+#define FPCR_PRECISION_D	2	/* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE		0
+#define PEXECUTE	1
+#define PCONV		2
+#define PNORM		3
+#define PREGISTER	4
+#define PINSTR		5
+#define PUNIMPL		6
+#define PMOVEM		7
+
+#define PMDECODE	(1<<PDECODE)
+#define PMEXECUTE	(1<<PEXECUTE)
+#define PMCONV		(1<<PCONV)
+#define PMNORM		(1<<PNORM)
+#define PMREGISTER	(1<<PREGISTER)
+#define PMINSTR		(1<<PINSTR)
+#define PMUNIMPL	(1<<PUNIMPL)
+#define PMMOVEM		(1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+	unsigned long long m64;
+	unsigned long m32[2];
+};
+
+union fp_mant128 {
+	unsigned long long m64[2];
+	unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+	unsigned char lowmant;
+	unsigned char sign;
+	unsigned short exp;
+	union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+	struct fp_ext fpreg[8];
+	unsigned int fpcr;
+	unsigned int fpsr;
+	unsigned int fpiar;
+	unsigned short prec;
+	unsigned short rnd;
+	struct fp_ext temp[2];
+};
+
+#ifdef FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({			\
+	if (fp_debugprint & (1 << (bit)))		\
+		printk(fmt, ## args);			\
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({					\
+	static int __count = 3;				\
+							\
+	if (__count > 0) {				\
+		printk("You just hit an unimplemented "	\
+		       "fpu instruction (%s)\n", str);	\
+		printk("Please report this to ....\n");	\
+		__count--;				\
+	}						\
+})
+
+#define FPDATA		((struct fp_data *)current->thread.fp)
+
+#else	/* __ASSEMBLY__ */
+
+#define FPDATA		%a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG	(TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR	(TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR	(TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR	(TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC	(TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND		(TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1	(TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2	(TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF	(TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO		(PT_D0)
+#define FPS_D1		(PT_D1)
+#define FPS_D2		(PT_D2)
+#define FPS_A0		(PT_A0)
+#define FPS_A1		(PT_A1)
+#define FPS_A2		(PT_A2)
+#define FPS_SR		(PT_SR)
+#define FPS_PC		(PT_PC)
+#define FPS_EA		(PT_PC+6)
+#define FPS_PC2		(PT_PC+10)
+
+.macro	fp_get_fp_reg
+	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
+	lea	(%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro	fp_get_pc dest
+	move.l	(FPS_PC+4,%sp),\dest
+.endm
+
+.macro	fp_put_pc src,jump=0
+	move.l	\src,(FPS_PC+4,%sp)
+.endm
+
+.macro	fp_get_instr_data	f,s,dest,label
+	getuser	\f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+	addq.l	#\s,%sp@(FPS_PC+4)
+.endm
+
+.macro	fp_get_instr_word	dest,label,addr
+	fp_get_instr_data	w,2,\dest,\label,\addr
+.endm
+
+.macro	fp_get_instr_long	dest,label,addr
+	fp_get_instr_data	l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro	getuser	size,src,dest,label,addr
+|	printf	,"[\size<%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+
+	.section .fixup,"ax"
+	.even
+.Lu2\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu2\@
+	.previous
+.endm
+
+.macro	putuser	size,src,dest,label,addr
+|	printf	,"[\size>%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+.Lu2\@:
+
+	.section .fixup,"ax"
+	.even
+.Lu3\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu3\@
+	.long	.Lu2\@,.Lu3\@
+	.previous
+.endm
+
+
+.macro	movestack	nr,arg1,arg2,arg3,arg4,arg5
+	.if	\nr
+	movestack	(\nr-1),\arg2,\arg3,\arg4,\arg5
+	move.l	\arg1,-(%sp)
+	.endif
+.endm
+
+.macro	printf	bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+	.data
+.Lpdata\@:
+	.string	"\string"
+	.previous
+
+	movem.l	%d0/%d1/%a0/%a1,-(%sp)
+	.if	\bit+1
+#if 0
+	moveq	#\bit,%d0
+	andw	#7,%d0
+	btst	%d0,fp_debugprint+((31-\bit)/8)
+#else
+	btst	#\bit,fp_debugprint+((31-\bit)/8)
+#endif
+	jeq	.Lpskip\@
+	.endif
+	movestack	\nr,\arg1,\arg2,\arg3,\arg4,\arg5
+	pea	.Lpdata\@
+	jsr	printk
+	lea	((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+	movem.l	(%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro	printx	bit,fp
+#ifdef FPU_EMU_DEBUG
+	movem.l	%d0/%a0,-(%sp)
+	lea	\fp,%a0
+#if 0
+	moveq	#'+',%d0
+	tst.w	(%a0)
+	jeq	.Lx1\@
+	moveq	#'-',%d0
+.Lx1\@:	printf	\bit," %c",1,%d0
+	move.l	(4,%a0),%d0
+	bclr	#31,%d0
+	jne	.Lx2\@
+	printf	\bit,"0."
+	jra	.Lx3\@
+.Lx2\@:	printf	\bit,"1."
+.Lx3\@:	printf	\bit,"%08x%08x",2,%d0,%a0@(8)
+	move.w	(2,%a0),%d0
+	ext.l	%d0
+	printf	\bit,"E%04x",1,%d0
+#else
+	printf	\bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+	movem.l	(%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro	debug	instr,args
+#ifdef FPU_EMU_DEBUG
+	\instr	\args
+#endif
+.endm
+
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_M68K_SETUP_H */
diff --git a/include/asm-m68k/mc146818rtc.h b/include/asm-m68k/mc146818rtc.h
new file mode 100644
index 000000000000..11442095a8cf
--- /dev/null
+++ b/include/asm-m68k/mc146818rtc.h
@@ -0,0 +1,26 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_ATARI
+/* RTC in Atari machines */
+
+#include <asm/atarihw.h>
+
+#define RTC_PORT(x)	(TT_RTC_BAS + 2*(x))
+
+#define CMOS_READ(addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_outb_p((val),RTC_PORT(1)); \
+})
+#endif /* CONFIG_ATARI */
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-m68k/md.h b/include/asm-m68k/md.h
new file mode 100644
index 000000000000..467ea08383e4
--- /dev/null
+++ b/include/asm-m68k/md.h
@@ -0,0 +1,13 @@
+/* $Id: md.h,v 1.1 1997/12/15 15:12:04 jj Exp $
+ * md.h: High speed xor_block operation for RAID4/5
+ *
+ */
+
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/include/asm-m68k/mman.h b/include/asm-m68k/mman.h
new file mode 100644
index 000000000000..f831c4eeae6e
--- /dev/null
+++ b/include/asm-m68k/mman.h
@@ -0,0 +1,43 @@
+#ifndef __M68K_MMAN_H__
+#define __M68K_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __M68K_MMAN_H__ */
diff --git a/include/asm-m68k/mmu.h b/include/asm-m68k/mmu.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/include/asm-m68k/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-m68k/mmu_context.h b/include/asm-m68k/mmu_context.h
new file mode 100644
index 000000000000..661191d15c81
--- /dev/null
+++ b/include/asm-m68k/mmu_context.h
@@ -0,0 +1,154 @@
+#ifndef __M68K_MMU_CONTEXT_H
+#define __M68K_MMU_CONTEXT_H
+
+#include <linux/config.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifndef CONFIG_SUN3
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	mm->context = virt_to_phys(mm->pgd);
+	return 0;
+}
+
+#define destroy_context(mm)		do { } while(0)
+
+static inline void switch_mm_0230(struct mm_struct *mm)
+{
+	unsigned long crp[2] = {
+		0x80000000 | _PAGE_TABLE, mm->context
+	};
+	unsigned long tmp;
+
+	asm volatile (".chip 68030");
+
+	/* flush MC68030/MC68020 caches (they are virtually addressed) */
+	asm volatile (
+		"movec %%cacr,%0;"
+		"orw %1,%0; "
+		"movec %0,%%cacr"
+		: "=d" (tmp) : "di" (FLUSH_I_AND_D));
+
+	/* Switch the root pointer. For a 030-only kernel,
+	 * avoid flushing the whole ATC, we only need to
+	 * flush the user entries. The 68851 does this by
+	 * itself. Avoid a runtime check here.
+	 */
+	asm volatile (
+#ifdef CPU_M68030_ONLY
+		"pmovefd %0,%%crp; "
+		"pflush #0,#4"
+#else
+		"pmove %0,%%crp"
+#endif
+		: : "m" (crp[0]));
+
+	asm volatile (".chip 68k");
+}
+
+static inline void switch_mm_0460(struct mm_struct *mm)
+{
+	asm volatile (".chip 68040");
+
+	/* flush address translation cache (user entries) */
+	asm volatile ("pflushan");
+
+	/* switch the root pointer */
+	asm volatile ("movec %0,%%urp" : : "r" (mm->context));
+
+	if (CPU_IS_060) {
+		unsigned long tmp;
+
+		/* clear user entries in the branch cache */
+		asm volatile (
+			"movec %%cacr,%0; "
+		        "orl %1,%0; "
+		        "movec %0,%%cacr"
+			: "=d" (tmp): "di" (0x00200000));
+	}
+
+	asm volatile (".chip 68k");
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+	if (prev != next) {
+		if (CPU_IS_020_OR_030)
+			switch_mm_0230(next);
+		else
+			switch_mm_0460(next);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+	next_mm->context = virt_to_phys(next_mm->pgd);
+
+	if (CPU_IS_020_OR_030)
+		switch_mm_0230(next_mm);
+	else
+		switch_mm_0460(next_mm);
+}
+
+#else  /* CONFIG_SUN3 */
+#include <asm/sun3mmu.h>
+#include <linux/sched.h>
+
+extern unsigned long get_free_context(struct mm_struct *mm);
+extern void clear_context(unsigned long context);
+
+/* set the context for a new task to unmapped */
+static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context = SUN3_INVALID_CONTEXT;
+	return 0;
+}
+
+/* find the context given to this process, and if it hasn't already
+   got one, go get one for it. */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	if(mm->context == SUN3_INVALID_CONTEXT)
+		mm->context = get_free_context(mm);
+}
+
+/* flush context if allocated... */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if(mm->context != SUN3_INVALID_CONTEXT)
+		clear_context(mm->context);
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	sun3_put_context(mm->context);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+	activate_context(tsk->mm);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+	activate_context(next_mm);
+}
+
+#endif
+#endif
diff --git a/include/asm-m68k/module.h b/include/asm-m68k/module.h
new file mode 100644
index 000000000000..c6d75af2d8d3
--- /dev/null
+++ b/include/asm-m68k/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_M68K_MODULE_H
+#define _ASM_M68K_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_M68K_MODULE_H */
diff --git a/include/asm-m68k/motorola_pgalloc.h b/include/asm-m68k/motorola_pgalloc.h
new file mode 100644
index 000000000000..5158412cd54d
--- /dev/null
+++ b/include/asm-m68k/motorola_pgalloc.h
@@ -0,0 +1,107 @@
+#ifndef _MOTOROLA_PGALLOC_H
+#define _MOTOROLA_PGALLOC_H
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+extern pmd_t *get_pointer_table(void);
+extern int free_pointer_table(pmd_t *);
+
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (pte) {
+		__flush_page_to_ram(pte);
+		flush_tlb_kernel_page(pte);
+		nocache_page(pte);
+	}
+
+	return pte;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	cache_page(pte);
+	free_page((unsigned long) pte);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	pte_t *pte;
+
+	if(!page)
+		return NULL;
+
+	pte = kmap(page);
+	if (pte) {
+		__flush_page_to_ram(pte);
+		flush_tlb_kernel_page(pte);
+		nocache_page(pte);
+	}
+	kunmap(pte);
+
+	return page;
+}
+
+static inline void pte_free(struct page *page)
+{
+	cache_page(kmap(page));
+	kunmap(page);
+	__free_page(page);
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
+{
+	cache_page(kmap(page));
+	kunmap(page);
+	__free_page(page);
+}
+
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	return get_pointer_table();
+}
+
+static inline int pmd_free(pmd_t *pmd)
+{
+	return free_pointer_table(pmd);
+}
+
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+	return free_pointer_table(pmd);
+}
+
+
+static inline void pgd_free(pgd_t *pgd)
+{
+	pmd_free((pmd_t *)pgd);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return (pgd_t *)get_pointer_table();
+}
+
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	pmd_set(pmd, pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+{
+	pmd_set(pmd, page_address(page));
+}
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	pgd_set(pgd, pmd);
+}
+
+#endif /* _MOTOROLA_PGALLOC_H */
diff --git a/include/asm-m68k/motorola_pgtable.h b/include/asm-m68k/motorola_pgtable.h
new file mode 100644
index 000000000000..1628723458f5
--- /dev/null
+++ b/include/asm-m68k/motorola_pgtable.h
@@ -0,0 +1,294 @@
+#ifndef _MOTOROLA_PGTABLE_H
+#define _MOTOROLA_PGTABLE_H
+
+#include <linux/config.h>
+
+/*
+ * Definitions for MMU descriptors
+ */
+#define _PAGE_PRESENT	0x001
+#define _PAGE_SHORT	0x002
+#define _PAGE_RONLY	0x004
+#define _PAGE_ACCESSED	0x008
+#define _PAGE_DIRTY	0x010
+#define _PAGE_SUPER	0x080	/* 68040 supervisor only */
+#define _PAGE_GLOBAL040	0x400	/* 68040 global bit, used for kva descs */
+#define _PAGE_NOCACHE030 0x040	/* 68030 no-cache mode */
+#define _PAGE_NOCACHE	0x060	/* 68040 cache mode, non-serialized */
+#define _PAGE_NOCACHE_S	0x040	/* 68040 no-cache mode, serialized */
+#define _PAGE_CACHE040	0x020	/* 68040 cache mode, cachable, copyback */
+#define _PAGE_CACHE040W	0x000	/* 68040 cache mode, cachable, write-through */
+
+#define _DESCTYPE_MASK	0x003
+
+#define _CACHEMASK040	(~0x060)
+#define _TABLE_MASK	(0xfffffe00)
+
+#define _PAGE_TABLE	(_PAGE_SHORT)
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE)
+
+#define _PAGE_PROTNONE	0x004
+#define _PAGE_FILE	0x008	/* pagecache or swap? */
+
+#ifndef __ASSEMBLY__
+
+/* This is the cache mode to be used for pages containing page descriptors for
+ * processors >= '040. It is in pte_mknocache(), and the variable is defined
+ * and initialized in head.S */
+extern int m68k_pgtable_cachemode;
+
+/* This is the cache mode for normal pages, for supervisor access on
+ * processors >= '040. It is used in pte_mkcache(), and the variable is
+ * defined and initialized in head.S */
+
+#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH)
+#define m68k_supervisor_cachemode _PAGE_CACHE040W
+#elif defined(CPU_M68040_OR_M68060_ONLY)
+#define m68k_supervisor_cachemode _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define m68k_supervisor_cachemode 0
+#else
+extern int m68k_supervisor_cachemode;
+#endif
+
+#if defined(CPU_M68040_OR_M68060_ONLY)
+#define mm_cachebits _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define mm_cachebits 0
+#else
+extern unsigned long mm_cachebits;
+#endif
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits)
+
+/* Alternate definitions that are compile time constants, for
+   initializing protection_map.  The cachebits are fixed later.  */
+#define PAGE_NONE_C	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED_C	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_COPY_C	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+#define PAGE_READONLY_C	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+
+/*
+ * The m68k can't do page protection for execute, and considers that the same are read.
+ * Also, write permissions imply read permissions. This is the closest we can get..
+ */
+#define __P000	PAGE_NONE_C
+#define __P001	PAGE_READONLY_C
+#define __P010	PAGE_COPY_C
+#define __P011	PAGE_COPY_C
+#define __P100	PAGE_READONLY_C
+#define __P101	PAGE_READONLY_C
+#define __P110	PAGE_COPY_C
+#define __P111	PAGE_COPY_C
+
+#define __S000	PAGE_NONE_C
+#define __S001	PAGE_READONLY_C
+#define __S010	PAGE_SHARED_C
+#define __S011	PAGE_SHARED_C
+#define __S100	PAGE_READONLY_C
+#define __S101	PAGE_READONLY_C
+#define __S110	PAGE_SHARED_C
+#define __S111	PAGE_SHARED_C
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED;
+	unsigned long *ptr = pmdp->pmd;
+	short i = 16;
+	while (--i >= 0) {
+		*ptr++ = ptbl;
+		ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16);
+	}
+}
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+	pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp);
+}
+
+#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK))
+#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK))
+#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK))
+
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,ptep)		({ pte_val(*(ptep)) = 0; })
+
+#define pte_page(pte)		(mem_map + ((unsigned long)(__va(pte_val(pte)) - PAGE_OFFSET) >> PAGE_SHIFT))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_bad(pmd)		((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pmd_present(pmd)	(pmd_val(pmd) & _PAGE_TABLE)
+#define pmd_clear(pmdp) ({			\
+	unsigned long *__ptr = pmdp->pmd;	\
+	short __i = 16;				\
+	while (--__i >= 0)			\
+		*__ptr++ = 0;			\
+})
+#define pmd_page(pmd)		(mem_map + ((unsigned long)(__va(pmd_val(pmd)) - PAGE_OFFSET) >> PAGE_SHIFT))
+
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pgd_present(pgd)	(pgd_val(pgd) & _PAGE_TABLE)
+#define pgd_clear(pgdp)		({ pgd_val(*pgdp) = 0; })
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)		{ return 1; }
+static inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_RONLY); }
+static inline int pte_exec(pte_t pte)		{ return 1; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_RONLY; return pte; }
+static inline pte_t pte_rdprotect(pte_t pte)	{ return pte; }
+static inline pte_t pte_exprotect(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_RONLY; return pte; }
+static inline pte_t pte_mkread(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte)
+{
+	pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode;
+	return pte;
+}
+static inline pte_t pte_mkcache(pte_t pte)
+{
+	pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
+	return pte;
+}
+
+#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
+
+#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+static inline pgd_t *pgd_offset(struct mm_struct *mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+#define swapper_pg_dir kernel_pg_dir
+extern pgd_t kernel_pg_dir[128];
+
+static inline pgd_t *pgd_offset_k(unsigned long address)
+{
+	return kernel_pg_dir + (address >> PGDIR_SHIFT);
+}
+
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+	return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1));
+}
+
+/* Find an entry in the third-level page table.. */
+static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address)
+{
+	return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
+}
+
+#define pte_offset_map(pmdp,address) ((pte_t *)kmap(pmd_page(*pmdp)) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
+#define pte_unmap(pte) kunmap(pte)
+#define pte_unmap_nested(pte) kunmap(pte)
+
+/*
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+/* Prior to calling these routines, the page should have been flushed
+ * from both the cache and ATC, or the CPU might not notice that the
+ * cache setting for the page has been changed. -jskov
+ */
+static inline void nocache_page(void *vaddr)
+{
+	unsigned long addr = (unsigned long)vaddr;
+
+	if (CPU_IS_040_OR_060) {
+		pgd_t *dir;
+		pmd_t *pmdp;
+		pte_t *ptep;
+
+		dir = pgd_offset_k(addr);
+		pmdp = pmd_offset(dir, addr);
+		ptep = pte_offset_kernel(pmdp, addr);
+		*ptep = pte_mknocache(*ptep);
+	}
+}
+
+static inline void cache_page(void *vaddr)
+{
+	unsigned long addr = (unsigned long)vaddr;
+
+	if (CPU_IS_040_OR_060) {
+		pgd_t *dir;
+		pmd_t *pmdp;
+		pte_t *ptep;
+
+		dir = pgd_offset_k(addr);
+		pmdp = pmd_offset(dir, addr);
+		ptep = pte_offset_kernel(pmdp, addr);
+		*ptep = pte_mkcache(*ptep);
+	}
+}
+
+#define PTE_FILE_MAX_BITS	28
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+	return pte.pte >> 4;
+}
+
+static inline pte_t pgoff_to_pte(unsigned off)
+{
+	pte_t pte = { (off << 4) + _PAGE_FILE };
+	return pte;
+}
+
+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
+#define __swp_type(x)		(((x).val >> 4) & 0xff)
+#define __swp_offset(x)		((x).val >> 12)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#endif	/* !__ASSEMBLY__ */
+#endif /* _MOTOROLA_PGTABLE_H */
diff --git a/include/asm-m68k/movs.h b/include/asm-m68k/movs.h
new file mode 100644
index 000000000000..67dbea36960f
--- /dev/null
+++ b/include/asm-m68k/movs.h
@@ -0,0 +1,55 @@
+#ifndef  __MOVS_H__
+#define __MOVS_H__
+
+/*
+** movs.h
+**
+** Inline assembly macros to generate movs & related instructions
+*/
+
+/* Set DFC register value */
+
+#define SET_DFC(x) \
+        __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x));
+
+/* Get DFC register value */
+
+#define GET_DFC(x) \
+        __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : );
+
+/* Set SFC register value */
+
+#define SET_SFC(x) \
+        __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x));
+
+/* Get SFC register value */
+
+#define GET_SFC(x) \
+        __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : );
+
+#define SET_VBR(x) \
+        __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x));
+
+#define GET_VBR(x) \
+        __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : );
+
+/* Set a byte using the "movs" instruction */
+
+#define SET_CONTROL_BYTE(addr,value) \
+        __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a byte using the "movs" instruction */
+
+#define GET_CONTROL_BYTE(addr,value) \
+        __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr));
+
+/* Set a (long)word using the "movs" instruction */
+
+#define SET_CONTROL_WORD(addr,value) \
+        __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a (long)word using the "movs" instruction */
+
+#define GET_CONTROL_WORD(addr,value) \
+        __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr));
+#endif
diff --git a/include/asm-m68k/msgbuf.h b/include/asm-m68k/msgbuf.h
new file mode 100644
index 000000000000..243cb798de8f
--- /dev/null
+++ b/include/asm-m68k/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _M68K_MSGBUF_H
+#define _M68K_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _M68K_MSGBUF_H */
diff --git a/include/asm-m68k/mvme147hw.h b/include/asm-m68k/mvme147hw.h
new file mode 100644
index 000000000000..f245139f3671
--- /dev/null
+++ b/include/asm-m68k/mvme147hw.h
@@ -0,0 +1,111 @@
+#ifndef _MVME147HW_H_
+#define _MVME147HW_H_
+
+typedef struct {
+	unsigned char
+		ctrl,
+		bcd_sec,
+		bcd_min,
+		bcd_hr,
+		bcd_dow,
+		bcd_dom,
+		bcd_mth,
+		bcd_year;
+} MK48T02;
+
+#define RTC_WRITE	0x80
+#define RTC_READ	0x40
+#define RTC_STOP	0x20
+
+#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
+
+
+struct pcc_regs {
+   volatile u_long	dma_tadr;
+   volatile u_long	dma_dadr;
+   volatile u_long	dma_bcr;
+   volatile u_long	dma_hr;
+   volatile u_short	t1_preload;
+   volatile u_short	t1_count;
+   volatile u_short	t2_preload;
+   volatile u_short	t2_count;
+   volatile u_char	t1_int_cntrl;
+   volatile u_char	t1_cntrl;
+   volatile u_char	t2_int_cntrl;
+   volatile u_char	t2_cntrl;
+   volatile u_char	ac_fail;
+   volatile u_char	watchdog;
+   volatile u_char	lpt_intr;
+   volatile u_char	lpt_cntrl;
+   volatile u_char	dma_intr;
+   volatile u_char	dma_cntrl;
+   volatile u_char	bus_error;
+   volatile u_char	dma_status;
+   volatile u_char	abort;
+   volatile u_char	ta_fnctl;
+   volatile u_char	serial_cntrl;
+   volatile u_char	general_cntrl;
+   volatile u_char	lan_cntrl;
+   volatile u_char	general_status;
+   volatile u_char	scsi_interrupt;
+   volatile u_char	slave;
+   volatile u_char	soft1_cntrl;
+   volatile u_char	int_base;
+   volatile u_char	soft2_cntrl;
+   volatile u_char	revision_level;
+   volatile u_char	lpt_data;
+   volatile u_char	lpt_status;
+   };
+
+#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000)
+
+
+#define PCC_INT_ENAB		0x08
+
+#define PCC_TIMER_INT_CLR	0x80
+#define PCC_TIMER_PRELOAD	63936l
+
+#define PCC_LEVEL_ABORT		0x07
+#define PCC_LEVEL_SERIAL	0x04
+#define PCC_LEVEL_ETH		0x04
+#define PCC_LEVEL_TIMER1	0x04
+#define PCC_LEVEL_SCSI_PORT	0x04
+#define PCC_LEVEL_SCSI_DMA	0x04
+
+#define PCC_IRQ_AC_FAIL		0x40
+#define PCC_IRQ_BERR		0x41
+#define PCC_IRQ_ABORT		0x42
+/* #define PCC_IRQ_SERIAL	0x43 */
+#define PCC_IRQ_PRINTER		0x47
+#define PCC_IRQ_TIMER1		0x48
+#define PCC_IRQ_TIMER2		0x49
+#define PCC_IRQ_SOFTWARE1	0x4a
+#define PCC_IRQ_SOFTWARE2	0x4b
+
+
+#define M147_SCC_A_ADDR		0xfffe3002
+#define M147_SCC_B_ADDR		0xfffe3000
+#define M147_SCC_PCLK		5000000
+
+#define MVME147_IRQ_SCSI_PORT	0x45
+#define MVME147_IRQ_SCSI_DMA	0x46
+
+/* SCC interrupts, for MVME147 */
+
+#define MVME147_IRQ_TYPE_PRIO	0
+#define MVME147_IRQ_SCC_BASE		0x60
+#define MVME147_IRQ_SCCB_TX		0x60
+#define MVME147_IRQ_SCCB_STAT		0x62
+#define MVME147_IRQ_SCCB_RX		0x64
+#define MVME147_IRQ_SCCB_SPCOND		0x66
+#define MVME147_IRQ_SCCA_TX		0x68
+#define MVME147_IRQ_SCCA_STAT		0x6a
+#define MVME147_IRQ_SCCA_RX		0x6c
+#define MVME147_IRQ_SCCA_SPCOND		0x6e
+
+#define MVME147_LANCE_BASE	0xfffe1800
+#define MVME147_LANCE_IRQ	0x44
+
+#define ETHERNET_ADDRESS 0xfffe0778
+
+#endif
diff --git a/include/asm-m68k/mvme16xhw.h b/include/asm-m68k/mvme16xhw.h
new file mode 100644
index 000000000000..5d07231d2426
--- /dev/null
+++ b/include/asm-m68k/mvme16xhw.h
@@ -0,0 +1,111 @@
+#ifndef _M68K_MVME16xHW_H_
+#define _M68K_MVME16xHW_H_
+
+#include <asm/irq.h>
+
+/* Board ID data structure - pointer to this retrieved from Bug by head.S */
+
+/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */
+
+extern long mvme_bdid_ptr;
+
+typedef struct {
+	char	bdid[4];
+	u_char	rev, mth, day, yr;
+	u_short	size, reserved;
+	u_short	brdno;
+	char brdsuffix[2];
+	u_long	options;
+	u_short	clun, dlun, ctype, dnum;
+	u_long	option2;
+} t_bdid, *p_bdid;
+
+
+typedef struct {
+	u_char	ack_icr,
+		flt_icr,
+		sel_icr,
+		pe_icr,
+		bsy_icr,
+		spare1,
+		isr,
+		cr,
+		spare2,
+		spare3,
+		spare4,
+		data;
+} MVMElp, *MVMElpPtr;
+
+#define MVME_LPR_BASE	0xfff42030
+
+#define mvmelp   ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
+
+typedef struct {
+	unsigned char
+		ctrl,
+		bcd_sec,
+		bcd_min,
+		bcd_hr,
+		bcd_dow,
+		bcd_dom,
+		bcd_mth,
+		bcd_year;
+} MK48T08_t, *MK48T08ptr_t;
+
+#define RTC_WRITE	0x80
+#define RTC_READ	0x40
+#define RTC_STOP	0x20
+
+#define MVME_RTC_BASE	0xfffc1ff8
+
+#define MVME_I596_BASE	0xfff46000
+
+#define MVME_SCC_A_ADDR	0xfff45005
+#define MVME_SCC_B_ADDR	0xfff45001
+#define MVME_SCC_PCLK	10000000
+
+#define MVME162_IRQ_TYPE_PRIO	0
+
+#define MVME167_IRQ_PRN		0x54
+#define MVME16x_IRQ_I596	0x57
+#define MVME16x_IRQ_SCSI	0x55
+#define MVME16x_IRQ_FLY		0x7f
+#define MVME167_IRQ_SER_ERR	0x5c
+#define MVME167_IRQ_SER_MODEM	0x5d
+#define MVME167_IRQ_SER_TX	0x5e
+#define MVME167_IRQ_SER_RX	0x5f
+#define MVME16x_IRQ_TIMER	0x59
+#define MVME167_IRQ_ABORT	0x6e
+#define MVME162_IRQ_ABORT	0x5e
+
+/* SCC interrupts, for MVME162 */
+#define MVME162_IRQ_SCC_BASE		0x40
+#define MVME162_IRQ_SCCB_TX		0x40
+#define MVME162_IRQ_SCCB_STAT		0x42
+#define MVME162_IRQ_SCCB_RX		0x44
+#define MVME162_IRQ_SCCB_SPCOND		0x46
+#define MVME162_IRQ_SCCA_TX		0x48
+#define MVME162_IRQ_SCCA_STAT		0x4a
+#define MVME162_IRQ_SCCA_RX		0x4c
+#define MVME162_IRQ_SCCA_SPCOND		0x4e
+
+/* MVME162 version register */
+
+#define MVME162_VERSION_REG	0xfff4202e
+
+extern unsigned short mvme16x_config;
+
+/* Lower 8 bits must match the revision register in the MC2 chip */
+
+#define MVME16x_CONFIG_SPEED_32		0x0001
+#define MVME16x_CONFIG_NO_VMECHIP2	0x0002
+#define MVME16x_CONFIG_NO_SCSICHIP	0x0004
+#define MVME16x_CONFIG_NO_ETHERNET	0x0008
+#define MVME16x_CONFIG_GOT_FPU		0x0010
+
+#define MVME16x_CONFIG_GOT_LP		0x0100
+#define MVME16x_CONFIG_GOT_CD2401	0x0200
+#define MVME16x_CONFIG_GOT_SCCA		0x0400
+#define MVME16x_CONFIG_GOT_SCCB		0x0800
+
+#endif
diff --git a/include/asm-m68k/namei.h b/include/asm-m68k/namei.h
new file mode 100644
index 000000000000..f33f243b644a
--- /dev/null
+++ b/include/asm-m68k/namei.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-m68k/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __M68K_NAMEI_H
+#define __M68K_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif
diff --git a/include/asm-m68k/nubus.h b/include/asm-m68k/nubus.h
new file mode 100644
index 000000000000..d6be9976f1ae
--- /dev/null
+++ b/include/asm-m68k/nubus.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_M68K_NUBUS_H
+#define _ASM_M68K_NUBUS_H
+
+#include <asm/raw_io.h>
+
+#define nubus_readb raw_inb
+#define nubus_readw raw_inw
+#define nubus_readl raw_inl
+
+#define nubus_writeb raw_outb
+#define nubus_writew raw_outw
+#define nubus_writel raw_outl
+
+#define nubus_memset_io(a,b,c)		memset((void *)(a),(b),(c))
+#define nubus_memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define nubus_memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+static inline void *nubus_remap_nocache_ser(unsigned long physaddr,
+					    unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void *nubus_remap_nocache_nonser(unsigned long physaddr,
+					       unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void *nbus_remap_writethrough(unsigned long physaddr,
+					    unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void *nubus_remap_fullcache(unsigned long physaddr,
+					  unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define nubus_unmap iounmap
+#define nubus_iounmap iounmap
+#define nubus_ioremap nubus_remap_nocache_ser
+
+#endif /* _ASM_NUBUS_H */
diff --git a/include/asm-m68k/openprom.h b/include/asm-m68k/openprom.h
new file mode 100644
index 000000000000..efbfb0bec6e2
--- /dev/null
+++ b/include/asm-m68k/openprom.h
@@ -0,0 +1,314 @@
+/* $Id: openprom.h,v 1.19 1996/09/25 03:51:08 davem Exp $ */
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+
+/* Empirical constants... */
+#ifdef CONFIG_SUN3
+#define KADB_DEBUGGER_BEGVM     0x0fee0000    /* There is no kadb yet but...*/
+#define LINUX_OPPROM_BEGVM      0x0fef0000
+#define LINUX_OPPROM_ENDVM      0x0ff10000    /* I think this is right - tm */
+#else
+#define KADB_DEBUGGER_BEGVM     0xffc00000    /* Where kern debugger is in virt-mem */
+#define	LINUX_OPPROM_BEGVM	0xffd00000
+#define	LINUX_OPPROM_ENDVM	0xfff00000
+#define	LINUX_OPPROM_MAGIC      0x10010407
+#endif
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	char *start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+struct linux_romvec {
+	char		*pv_initsp;
+	int		(*pv_startmon)(void);
+
+	int		*diagberr;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+	unsigned	*pv_sun3mem;
+
+	unsigned char	(*pv_getchar)(void);
+	int		(*pv_putchar)(int ch);
+	int		(*pv_nbgetchar)(void);
+	int		(*pv_nbputchar)(int ch);
+	unsigned char	*pv_echo;
+	unsigned char	*pv_insource;
+	unsigned char	*pv_outsink;
+
+	int		(*pv_getkey)(void);
+	int		(*pv_initgetkey)(void);
+	unsigned int	*pv_translation;
+	unsigned char	*pv_keybid;
+	int		*pv_screen_x;
+	int		*pv_screen_y;
+	struct keybuf	*pv_keybuf;
+
+	char		*pv_monid;
+
+	/*
+	 * Frame buffer output and terminal emulation
+	 */
+
+	int		(*pv_fbwritechar)(char);
+	int		*pv_fbaddr;
+	char		**pv_font;
+	int		(*pv_fbwritestr)(char);
+
+	void		(*pv_reboot)(char *bootstr);
+
+	/*
+	 * Line input and parsing
+	 */
+
+	unsigned char	*pv_linebuf;
+	unsigned char	**pv_lineptr;
+	int		*pv_linesize;
+	int		(*pv_getline)(void);
+	unsigned char	(*pv_getnextchar)(void);
+	unsigned char	(*pv_peeknextchar)(void);
+	int		*pv_fbthere;
+	int		(*pv_getnum)(void);
+
+	void		(*pv_printf)(const char *fmt, ...);
+	int		(*pv_printhex)(void);
+
+	unsigned char	*pv_leds;
+	int		(*pv_setleds)(void);
+
+	/*
+	 * Non-maskable interrupt  (nmi) information
+	 */
+
+	int		(*pv_nmiaddr)(void);
+	int		(*pv_abortentry)(void);
+	int		*pv_nmiclock;
+
+	int		*pv_fbtype;
+
+	/*
+	 * Assorted other things
+	 */
+
+	unsigned	pv_romvers;
+	struct globram  *pv_globram;
+	char		*pv_kbdzscc;
+
+	int		*pv_keyrinit;
+	unsigned char	*pv_keyrtick;
+	unsigned	*pv_memoryavail;
+	long		*pv_resetaddr;
+	long		*pv_resetmap;
+
+	void		(*pv_halt)(void);
+	unsigned char	*pv_memorybitmap;
+
+#ifdef CONFIG_SUN3
+	void		(*pv_setctxt)(int ctxt, char *va, int pmeg);
+	void		(*pv_vector_cmd)(void);
+	int		dummy1z;
+	int		dummy2z;
+	int		dummy3z;
+	int		dummy4z;
+#endif
+};
+#else
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+#endif
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	int which_io;         /* is this in OBIO space? */
+	char *phys_addr;      /* The physical address of this register */
+	int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/include/asm-m68k/oplib.h b/include/asm-m68k/oplib.h
new file mode 100644
index 000000000000..c3594f473ef7
--- /dev/null
+++ b/include/asm-m68k/oplib.h
@@ -0,0 +1,297 @@
+/* $Id: oplib.h,v 1.12 1996/10/31 06:29:13 davem Exp $
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+        PROM_AP1000,  /* actually no prom at all */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries.  One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom.  So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_v0 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void);
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal printf routine, don't use in kernel/boot code. */
+void prom_printf(char *fmt, ...);
+
+/* Query for input device type */
+
+enum prom_input_device {
+	PROMDEV_IKBD,			/* input from keyboard */
+	PROMDEV_ITTYA,			/* input from ttya */
+	PROMDEV_ITTYB,			/* input from ttyb */
+	PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+	PROMDEV_OSCREEN,		/* to screen */
+	PROMDEV_OTTYA,			/* to ttya */
+	PROMDEV_OTTYB,			/* to ttyb */
+	PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+			 int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+			    int physical_segment);
+
+/* PROM device tree traversal functions... */
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, char *property,
+			    char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Puts in buffer a prom name in the form name@x,y or name (x for which_io
+ * and y for first regs phys address
+ */
+extern int prom_getname(int node, char *buf, int buflen);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Adjust reg values with the passed ranges. */
+extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
+			     struct linux_prom_ranges *rangep, int nranges);
+
+/* Adjust child ranges with the passed parent ranges. */
+extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges,
+			       struct linux_prom_ranges *pranges, int npranges);
+
+/* Apply promlib probed OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+				      struct linux_prom_registers *sbusregs, int nregs);
+
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
new file mode 100644
index 000000000000..99a516709210
--- /dev/null
+++ b/include/asm-m68k/page.h
@@ -0,0 +1,195 @@
+#ifndef _M68K_PAGE_H
+#define _M68K_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#ifndef CONFIG_SUN3
+#define PAGE_SHIFT	(12)
+#else
+#define PAGE_SHIFT	(13)
+#endif
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#if PAGE_SHIFT < 13
+#define THREAD_SIZE (8192)
+#else
+#define THREAD_SIZE PAGE_SIZE
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+/*
+ * We don't need to check for alignment etc.
+ */
+#ifdef CPU_M68040_OR_M68060_ONLY
+static inline void copy_page(void *to, void *from)
+{
+  unsigned long tmp;
+
+  __asm__ __volatile__("1:\t"
+		       ".chip 68040\n\t"
+		       "move16 %1@+,%0@+\n\t"
+		       "move16 %1@+,%0@+\n\t"
+		       ".chip 68k\n\t"
+		       "dbra  %2,1b\n\t"
+		       : "=a" (to), "=a" (from), "=d" (tmp)
+		       : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1)
+		       );
+}
+
+static inline void clear_page(void *page)
+{
+	unsigned long tmp;
+	unsigned long *sp = page;
+
+	*sp++ = 0;
+	*sp++ = 0;
+	*sp++ = 0;
+	*sp++ = 0;
+
+	__asm__ __volatile__("1:\t"
+			     ".chip 68040\n\t"
+			     "move16 %2@+,%0@+\n\t"
+			     ".chip 68k\n\t"
+			     "subqw  #8,%2\n\t"
+			     "subqw  #8,%2\n\t"
+			     "dbra   %1,1b\n\t"
+			     : "=a" (sp), "=d" (tmp)
+			     : "a" (page), "0" (sp),
+			       "1" ((PAGE_SIZE - 16) / 16 - 1));
+}
+
+#else
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+#endif
+
+#define clear_user_page(addr, vaddr, page)	\
+	do {	clear_page(addr);		\
+		flush_dcache_page(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		flush_dcache_page(page);	\
+	} while (0)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_SUN3
+
+#define WANT_PAGE_VIRTUAL
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+extern unsigned long m68k_memoffset;
+
+#define __pa(vaddr)		((unsigned long)(vaddr)+m68k_memoffset)
+#define __va(paddr)		((void *)((unsigned long)(paddr)-m68k_memoffset))
+#else
+#define __pa(vaddr)		virt_to_phys((void *)vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+#endif
+
+#else	/* !CONFIG_SUN3 */
+/* This #define is a horrible hack to suppress lots of warnings. --m */
+#define __pa(x) ___pa((unsigned long)x)
+static inline unsigned long ___pa(unsigned long x)
+{
+     if(x == 0)
+	  return 0;
+     if(x >= PAGE_OFFSET)
+        return (x-PAGE_OFFSET);
+     else
+        return (x+0x2000000);
+}
+
+static inline void *__va(unsigned long x)
+{
+     if(x == 0)
+	  return (void *)0;
+
+     if(x < 0x2000000)
+        return (void *)(x+PAGE_OFFSET);
+     else
+        return (void *)(x-0x2000000);
+}
+#endif	/* CONFIG_SUN3 */
+
+/*
+ * NOTE: virtual isn't really correct, actually it should be the offset into the
+ * memory node, but we have no highmem, so that works for now.
+ * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
+ * of the shifts unnecessary.
+ */
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(kaddr)	(mem_map + (((unsigned long)(kaddr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+
+#define virt_addr_valid(kaddr)	((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
+#define pfn_valid(pfn)		virt_addr_valid(pfn_to_virt(pfn))
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_PAGE_H */
diff --git a/include/asm-m68k/page_offset.h b/include/asm-m68k/page_offset.h
new file mode 100644
index 000000000000..86d3c2845ad4
--- /dev/null
+++ b/include/asm-m68k/page_offset.h
@@ -0,0 +1,9 @@
+#include <linux/config.h>
+
+/* This handles the memory map.. */
+#ifndef CONFIG_SUN3
+#define PAGE_OFFSET_RAW		0x00000000
+#else
+#define PAGE_OFFSET_RAW		0x0E000000
+#endif
+
diff --git a/include/asm-m68k/param.h b/include/asm-m68k/param.h
new file mode 100644
index 000000000000..60f409d81658
--- /dev/null
+++ b/include/asm-m68k/param.h
@@ -0,0 +1,22 @@
+#ifndef _M68K_PARAM_H
+#define _M68K_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		100		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68K_PARAM_H */
diff --git a/include/asm-m68k/parport.h b/include/asm-m68k/parport.h
new file mode 100644
index 000000000000..646b1872f73b
--- /dev/null
+++ b/include/asm-m68k/parport.h
@@ -0,0 +1,26 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ *
+ * RZ: for use with Q40 and other ISA machines
+ */
+
+#ifndef _ASM_M68K_PARPORT_H
+#define _ASM_M68K_PARPORT_H 1
+
+#define insl(port,buf,len)   isa_insb(port,buf,(len)<<2)
+#define outsl(port,buf,len)  isa_outsb(port,buf,(len)<<2)
+
+/* no dma, or IRQ autoprobing */
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+        if (! (MACH_IS_Q40))
+	  return 0; /* count=0 */
+	return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE);
+}
+
+#endif /* !(_ASM_M68K_PARPORT_H) */
diff --git a/include/asm-m68k/pci.h b/include/asm-m68k/pci.h
new file mode 100644
index 000000000000..9e7d79ab5d13
--- /dev/null
+++ b/include/asm-m68k/pci.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_M68K_PCI_H
+#define _ASM_M68K_PCI_H
+
+/*
+ * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
+ *
+ * Written by Wout Klaren.
+ */
+
+#include <asm/scatterlist.h>
+
+struct pci_ops;
+
+/*
+ * Structure with hardware dependent information and functions of the
+ * PCI bus.
+ */
+
+struct pci_bus_info
+{
+	/*
+	 * Resources of the PCI bus.
+	 */
+
+	struct resource mem_space;
+	struct resource io_space;
+
+	/*
+	 * System dependent functions.
+	 */
+
+	struct pci_ops *m68k_pci_ops;
+
+	void (*fixup)(int pci_modify);
+	void (*conf_device)(struct pci_dev *dev);
+};
+
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* _ASM_M68K_PCI_H */
diff --git a/include/asm-m68k/percpu.h b/include/asm-m68k/percpu.h
new file mode 100644
index 000000000000..0859d048faf5
--- /dev/null
+++ b/include/asm-m68k/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_M68K_PERCPU_H
+#define __ASM_M68K_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif	/* __ASM_M68K_PERCPU_H */
diff --git a/include/asm-m68k/pgalloc.h b/include/asm-m68k/pgalloc.h
new file mode 100644
index 000000000000..b468b7958aaa
--- /dev/null
+++ b/include/asm-m68k/pgalloc.h
@@ -0,0 +1,19 @@
+
+#ifndef M68K_PGALLOC_H
+#define M68K_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgalloc.h>
+#else
+#include <asm/motorola_pgalloc.h>
+#endif
+
+#endif /* M68K_PGALLOC_H */
diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h
new file mode 100644
index 000000000000..0eef32778df2
--- /dev/null
+++ b/include/asm-m68k/pgtable.h
@@ -0,0 +1,191 @@
+#ifndef _M68K_PGTABLE_H
+#define _M68K_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the m68k page table tree.
+ */
+
+#include <asm/virtconvert.h>
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)					\
+	do{							\
+		*(pteptr) = (pteval);				\
+	} while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#ifdef CONFIG_SUN3
+#define PMD_SHIFT       17
+#else
+#define PMD_SHIFT	22
+#endif
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#ifdef CONFIG_SUN3
+#define PGDIR_SHIFT     17
+#else
+#define PGDIR_SHIFT	25
+#endif
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the m68k is configured as three-level,
+ * so we do have PMD level physically.
+ */
+#ifdef CONFIG_SUN3
+#define PTRS_PER_PTE   16
+#define PTRS_PER_PMD   1
+#define PTRS_PER_PGD   2048
+#else
+#define PTRS_PER_PTE	1024
+#define PTRS_PER_PMD	8
+#define PTRS_PER_PGD	128
+#endif
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+/* Virtual address region for use by kernel_map() */
+#ifdef CONFIG_SUN3
+#define KMAP_START     0x0DC00000
+#define KMAP_END       0x0E000000
+#else
+#define	KMAP_START	0xd0000000
+#define	KMAP_END	0xf0000000
+#endif
+
+#ifndef CONFIG_SUN3
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	(8*1024*1024)
+#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END KMAP_START
+#else
+extern unsigned long vmalloc_end;
+#define VMALLOC_START 0x0f800000
+#define VMALLOC_END vmalloc_end
+#endif /* CONFIG_SUN3 */
+
+/* zero page used for uninitialized stuff */
+extern void *empty_zero_page;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware!  SRB. */
+#define SIZEOF_PTR_LOG2			       2
+
+/*
+ * Check if the addr/len goes up to the end of a physical
+ * memory chunk.  Used for DMA functions.
+ */
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+/*
+ * It makes no sense to consider whether we cross a memory boundary if
+ * we support just one physical chunk of memory.
+ */
+static inline int mm_end_of_chunk(unsigned long addr, int len)
+{
+	return 0;
+}
+#else
+int mm_end_of_chunk (unsigned long addr, int len);
+#endif
+
+extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
+
+/*
+ * The m68k doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.  The Sun3 does, but
+ * they are updated on demand.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+				    unsigned long address, pte_t pte)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/* MMU-specific headers */
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgtable.h>
+#else
+#include <asm/motorola_pgtable.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#ifdef SUN3_PAGE_NOCACHE
+# define __SUN3_PAGE_NOCACHE	SUN3_PAGE_NOCACHE
+#else
+# define __SUN3_PAGE_NOCACHE	0
+#endif
+#define pgprot_noncached(prot)							\
+	(MMU_IS_SUN3								\
+	 ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE))			\
+	 : ((MMU_IS_851 || MMU_IS_030)						\
+	    ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030))			\
+	    : (MMU_IS_040 || MMU_IS_060)					\
+	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
+	    : (prot)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _M68K_PGTABLE_H */
diff --git a/include/asm-m68k/poll.h b/include/asm-m68k/poll.h
new file mode 100644
index 000000000000..c4b69c4a87e1
--- /dev/null
+++ b/include/asm-m68k/poll.h
@@ -0,0 +1,23 @@
+#ifndef __m68k_POLL_H
+#define __m68k_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-m68k/posix_types.h b/include/asm-m68k/posix_types.h
new file mode 100644
index 000000000000..fa166ee30286
--- /dev/null
+++ b/include/asm-m68k/posix_types.h
@@ -0,0 +1,65 @@
+#ifndef __ARCH_M68K_POSIX_TYPES_H
+#define __ARCH_M68K_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h
new file mode 100644
index 000000000000..df1575db32af
--- /dev/null
+++ b/include/asm-m68k/processor.h
@@ -0,0 +1,140 @@
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+	unsigned long usp;
+
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE	(0xF0000000UL)
+#else
+#ifdef __ASSEMBLY__
+#define TASK_SIZE	(0x0E000000)
+#else
+#define TASK_SIZE	(0x0E000000UL)
+#endif
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE	0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE	0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
+
+struct task_work {
+	unsigned char sigpending;
+	unsigned char notify_resume;	/* request for notification on
+					   userspace execution resumption */
+	char          need_resched;
+	unsigned char delayed_trace;	/* single step a syscall */
+	unsigned char syscall_trace;	/* count of syscall interceptors */
+	unsigned char memdie;		/* task was selected to be killed */
+	unsigned char pad[2];
+};
+
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  faddr;		/* info about last fault */
+	int            signo, code;
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+	struct task_work work;
+};
+
+#define INIT_THREAD  {							\
+	ksp:	sizeof(init_stack) + (unsigned long) init_stack,	\
+	sr:	PS_S,							\
+	fs:	__KERNEL_DS,						\
+	info:	INIT_THREAD_INFO(init_task)				\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				unsigned long usp)
+{
+	/* reads from user space */
+	set_fs(USER_DS);
+
+	regs->pc = pc;
+	regs->sr &= ~0x2000;
+	wrusp(usp);
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()	barrier()
+
+#endif
diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h
new file mode 100644
index 000000000000..57e763d79bf4
--- /dev/null
+++ b/include/asm-m68k/ptrace.h
@@ -0,0 +1,80 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/include/asm-m68k/q40_master.h b/include/asm-m68k/q40_master.h
new file mode 100644
index 000000000000..3907a09d4fca
--- /dev/null
+++ b/include/asm-m68k/q40_master.h
@@ -0,0 +1,69 @@
+/*
+ * Q40 master Chip Control
+ * RTC stuff merged for compactnes..
+*/
+
+#ifndef _Q40_MASTER_H
+#define _Q40_MASTER_H
+
+#include <asm/raw_io.h>
+
+
+#define q40_master_addr 0xff000000
+
+#define IIRQ_REG            0x0       /* internal IRQ reg */
+#define EIRQ_REG            0x4       /* external ... */
+#define KEYCODE_REG         0x1c      /* value of received scancode  */
+#define DISPLAY_CONTROL_REG 0x18
+#define FRAME_CLEAR_REG     0x24
+#define LED_REG             0x30
+
+#define Q40_LED_ON()        master_outb(1,LED_REG)
+#define Q40_LED_OFF()       master_outb(0,LED_REG)
+
+#define INTERRUPT_REG       IIRQ_REG  /* "native" ints */
+#define KEY_IRQ_ENABLE_REG  0x08      /**/
+#define KEYBOARD_UNLOCK_REG 0x20      /* clear kb int */
+
+#define SAMPLE_ENABLE_REG   0x14      /* generate SAMPLE ints */
+#define SAMPLE_RATE_REG     0x2c
+#define SAMPLE_CLEAR_REG    0x28
+#define SAMPLE_LOW          0x00
+#define SAMPLE_HIGH         0x01
+
+#define FRAME_RATE_REG       0x38      /* generate FRAME ints at 200 HZ rate */
+
+#if 0
+#define SER_ENABLE_REG      0x0c      /* allow serial ints to be generated */
+#endif
+#define EXT_ENABLE_REG      0x10      /* ... rest of the ISA ints ... */
+
+
+#define master_inb(_reg_)      in_8((unsigned char *)q40_master_addr+_reg_)
+#define master_outb(_b_,_reg_)  out_8((unsigned char *)q40_master_addr+_reg_,_b_)
+
+/* RTC defines */
+
+#define Q40_RTC_BASE	    (0xff021ffc)
+
+#define Q40_RTC_YEAR        (*(volatile unsigned char *)(Q40_RTC_BASE+0))
+#define Q40_RTC_MNTH        (*(volatile unsigned char *)(Q40_RTC_BASE-4))
+#define Q40_RTC_DATE        (*(volatile unsigned char *)(Q40_RTC_BASE-8))
+#define Q40_RTC_DOW         (*(volatile unsigned char *)(Q40_RTC_BASE-12))
+#define Q40_RTC_HOUR        (*(volatile unsigned char *)(Q40_RTC_BASE-16))
+#define Q40_RTC_MINS        (*(volatile unsigned char *)(Q40_RTC_BASE-20))
+#define Q40_RTC_SECS        (*(volatile unsigned char *)(Q40_RTC_BASE-24))
+#define Q40_RTC_CTRL        (*(volatile unsigned char *)(Q40_RTC_BASE-28))
+
+/* some control bits */
+#define Q40_RTC_READ   64  /* prepare for reading */
+#define Q40_RTC_WRITE  128
+
+/* define some Q40 specific ints */
+#include "q40ints.h"
+
+/* misc defs */
+#define DAC_LEFT  ((unsigned char *)0xff008000)
+#define DAC_RIGHT ((unsigned char *)0xff008004)
+
+#endif /* _Q40_MASTER_H */
diff --git a/include/asm-m68k/q40ints.h b/include/asm-m68k/q40ints.h
new file mode 100644
index 000000000000..3d970afb708f
--- /dev/null
+++ b/include/asm-m68k/q40ints.h
@@ -0,0 +1,29 @@
+/*
+ * contains some Q40 related interrupt definitions
+ */
+
+#define Q40_IRQ_MAX      (34)
+
+#define Q40_IRQ_SAMPLE    (34)
+#define Q40_IRQ_KEYBOARD (32)
+#define Q40_IRQ_FRAME    (33)
+
+
+/* masks for interrupt regiosters*/
+/* internal, IIRQ_REG */
+#define Q40_IRQ_KEYB_MASK    (2)
+#define Q40_IRQ_SER_MASK     (1<<2)
+#define Q40_IRQ_FRAME_MASK   (1<<3)
+#define Q40_IRQ_EXT_MASK     (1<<4)    /* is a EIRQ */
+/* eirq, EIRQ_REG */
+#define Q40_IRQ3_MASK        (1)
+#define Q40_IRQ4_MASK        (1<<1)
+#define Q40_IRQ5_MASK        (1<<2)
+#define Q40_IRQ6_MASK        (1<<3)
+#define Q40_IRQ7_MASK        (1<<4)
+#define Q40_IRQ10_MASK       (1<<5)
+#define Q40_IRQ14_MASK       (1<<6)
+#define Q40_IRQ15_MASK       (1<<7)
+
+extern unsigned long q40_probe_irq_on (void);
+extern int q40_probe_irq_off (unsigned long irqs);
diff --git a/include/asm-m68k/raw_io.h b/include/asm-m68k/raw_io.h
new file mode 100644
index 000000000000..041f0a87b25d
--- /dev/null
+++ b/include/asm-m68k/raw_io.h
@@ -0,0 +1,342 @@
+/*
+ * linux/include/asm-m68k/raw_io.h
+ *
+ * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
+ *
+ */
+
+#ifndef _RAW_IO_H
+#define _RAW_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void iounmap(void *addr);
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size,
+		       int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesirable for some devices.
+ */
+#define in_8(addr) \
+    ({ u8 __v = (*(volatile u8 *) (addr)); __v; })
+#define in_be16(addr) \
+    ({ u16 __v = (*(volatile u16 *) (addr)); __v; })
+#define in_be32(addr) \
+    ({ u32 __v = (*(volatile u32 *) (addr)); __v; })
+#define in_le16(addr) \
+    ({ u16 __v = le16_to_cpu(*(volatile u16 *) (addr)); __v; })
+#define in_le32(addr) \
+    ({ u32 __v = le32_to_cpu(*(volatile u32 *) (addr)); __v; })
+
+#define out_8(addr,b) (void)((*(volatile u8 *) (addr)) = (b))
+#define out_be16(addr,w) (void)((*(volatile u16 *) (addr)) = (w))
+#define out_be32(addr,l) (void)((*(volatile u32 *) (addr)) = (l))
+#define out_le16(addr,w) (void)((*(volatile u16 *) (addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(volatile u32 *) (addr)) = cpu_to_le32(l))
+
+#define raw_inb in_8
+#define raw_inw in_be16
+#define raw_inl in_be32
+
+#define raw_outb(val,port) out_8((port),(val))
+#define raw_outw(val,port) out_be16((port),(val))
+#define raw_outl(val,port) out_be32((port),(val))
+
+static inline void raw_insb(volatile u8 *port, u8 *buf, unsigned int len)
+{
+	unsigned int i;
+
+        for (i = 0; i < len; i++)
+		*buf++ = in_8(port);
+}
+
+static inline void raw_outsb(volatile u8 *port, const u8 *buf,
+			     unsigned int len)
+{
+	unsigned int i;
+
+        for (i = 0; i < len; i++)
+		out_8(port, *buf++);
+}
+
+static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr)
+{
+	unsigned int tmp;
+
+	if (nr & 15) {
+		tmp = (nr & 15) - 1;
+		asm volatile (
+			"1: movew %2@,%0@+; dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+	if (nr >> 4) {
+		tmp = (nr >> 4) - 1;
+		asm volatile (
+			"1: "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"movew %2@,%0@+; "
+			"dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+}
+
+static inline void raw_outsw(volatile u16 *port, const u16 *buf,
+			     unsigned int nr)
+{
+	unsigned int tmp;
+
+	if (nr & 15) {
+		tmp = (nr & 15) - 1;
+		asm volatile (
+			"1: movew %0@+,%2@; dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+	if (nr >> 4) {
+		tmp = (nr >> 4) - 1;
+		asm volatile (
+			"1: "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"movew %0@+,%2@; "
+			"dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+}
+
+static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr)
+{
+	unsigned int tmp;
+
+	if (nr & 15) {
+		tmp = (nr & 15) - 1;
+		asm volatile (
+			"1: movel %2@,%0@+; dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+	if (nr >> 4) {
+		tmp = (nr >> 4) - 1;
+		asm volatile (
+			"1: "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"movel %2@,%0@+; "
+			"dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+}
+
+static inline void raw_outsl(volatile u32 *port, const u32 *buf,
+			     unsigned int nr)
+{
+	unsigned int tmp;
+
+	if (nr & 15) {
+		tmp = (nr & 15) - 1;
+		asm volatile (
+			"1: movel %0@+,%2@; dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+	if (nr >> 4) {
+		tmp = (nr >> 4) - 1;
+		asm volatile (
+			"1: "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"movel %0@+,%2@; "
+			"dbra %1,1b"
+			: "=a" (buf), "=d" (tmp)
+			: "a" (port), "0" (buf),
+			  "1" (tmp));
+	}
+}
+
+
+static inline void raw_insw_swapw(volatile u16 *port, u16 *buf,
+				  unsigned int nr)
+{
+    if ((nr) % 8)
+	__asm__ __volatile__
+	       ("\tmovel %0,%/a0\n\t"
+		"movel %1,%/a1\n\t"
+		"movel %2,%/d6\n\t"
+		"subql #1,%/d6\n"
+		"1:\tmovew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"dbra %/d6,1b"
+		:
+		: "g" (port), "g" (buf), "g" (nr)
+		: "d0", "a0", "a1", "d6");
+    else
+	__asm__ __volatile__
+	       ("movel %0,%/a0\n\t"
+		"movel %1,%/a1\n\t"
+		"movel %2,%/d6\n\t"
+		"lsrl  #3,%/d6\n\t"
+		"subql #1,%/d6\n"
+		"1:\tmovew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"movew %/a0@,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a1@+\n\t"
+		"dbra %/d6,1b"
+                :
+		: "g" (port), "g" (buf), "g" (nr)
+		: "d0", "a0", "a1", "d6");
+}
+
+static inline void raw_outsw_swapw(volatile u16 *port, const u16 *buf,
+				   unsigned int nr)
+{
+    if ((nr) % 8)
+	__asm__ __volatile__
+	       ("movel %0,%/a0\n\t"
+		"movel %1,%/a1\n\t"
+		"movel %2,%/d6\n\t"
+		"subql #1,%/d6\n"
+		"1:\tmovew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"dbra %/d6,1b"
+                :
+		: "g" (port), "g" (buf), "g" (nr)
+		: "d0", "a0", "a1", "d6");
+    else
+	__asm__ __volatile__
+	       ("movel %0,%/a0\n\t"
+		"movel %1,%/a1\n\t"
+		"movel %2,%/d6\n\t"
+		"lsrl  #3,%/d6\n\t"
+		"subql #1,%/d6\n"
+		"1:\tmovew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"movew %/a1@+,%/d0\n\t"
+		"rolw  #8,%/d0\n\t"
+		"movew %/d0,%/a0@\n\t"
+		"dbra %/d6,1b"
+                :
+		: "g" (port), "g" (buf), "g" (nr)
+		: "d0", "a0", "a1", "d6");
+}
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _RAW_IO_H */
diff --git a/include/asm-m68k/resource.h b/include/asm-m68k/resource.h
new file mode 100644
index 000000000000..e7d35019f337
--- /dev/null
+++ b/include/asm-m68k/resource.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_RESOURCE_H
+#define _M68K_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _M68K_RESOURCE_H */
diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h
new file mode 100644
index 000000000000..71406fc4e599
--- /dev/null
+++ b/include/asm-m68k/rtc.h
@@ -0,0 +1,76 @@
+/* asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	mach_hwclk(0, time);
+	return RTC_24H;
+}
+
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	return mach_hwclk(1, time);
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	if (mach_get_ss)
+		return mach_get_ss();
+	else{
+		struct rtc_time h;
+
+		get_rtc_time(&h);
+		return h.tm_sec;
+	}
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	if (mach_get_rtc_pll)
+		return mach_get_rtc_pll(pll);
+	else
+		return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	if (mach_set_rtc_pll)
+		return mach_set_rtc_pll(pll);
+	else
+		return -EINVAL;
+}
+#endif /* __KERNEL__ */
+
+#endif /* _ASM__RTC_H */
diff --git a/include/asm-m68k/sbus.h b/include/asm-m68k/sbus.h
new file mode 100644
index 000000000000..3b25c0040aa6
--- /dev/null
+++ b/include/asm-m68k/sbus.h
@@ -0,0 +1,50 @@
+/*
+ * some sbus structures and macros to make usage of sbus drivers possible
+ */
+
+#ifndef __M68K_SBUS_H
+#define __M68K_SBUS_H
+
+struct sbus_dev {
+	struct {
+		unsigned int which_io;
+		unsigned int phys_addr;
+	} reg_addrs[1];
+};
+
+extern void *sparc_alloc_io (u32, void *, int, char *, u32, int);
+#define sparc_alloc_io(a,b,c,d,e,f)	(a)
+
+#define ARCH_SUN4  0
+
+/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
+/* No SBUS on the Sun3, kludge -- sam */
+
+static inline void _sbus_writeb(unsigned char val, unsigned long addr)
+{
+	*(volatile unsigned char *)addr = val;
+}
+
+static inline unsigned char _sbus_readb(unsigned long addr)
+{
+	return *(volatile unsigned char *)addr;
+}
+
+static inline void _sbus_writel(unsigned long val, unsigned long addr)
+{
+	*(volatile unsigned long *)addr = val;
+
+}
+
+extern inline unsigned long _sbus_readl(unsigned long addr)
+{
+	return *(volatile unsigned long *)addr;
+}
+
+
+#define sbus_readb(a) _sbus_readb((unsigned long)a)
+#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
+#define sbus_readl(a) _sbus_readl((unsigned long)a)
+#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
+
+#endif
diff --git a/include/asm-m68k/scatterlist.h b/include/asm-m68k/scatterlist.h
new file mode 100644
index 000000000000..d7c9b5c5e6c7
--- /dev/null
+++ b/include/asm-m68k/scatterlist.h
@@ -0,0 +1,19 @@
+#ifndef _M68K_SCATTERLIST_H
+#define _M68K_SCATTERLIST_H
+
+struct scatterlist {
+	/* These two are only valid if ADDRESS member of this
+	 * struct is NULL.
+	 */
+	struct page *page;
+	unsigned int offset;
+
+	unsigned int length;
+
+	__u32 dvma_address; /* A place to hang host-specific addresses at. */
+};
+
+/* This is bogus and should go away. */
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/include/asm-m68k/sections.h b/include/asm-m68k/sections.h
new file mode 100644
index 000000000000..d64967ecfec6
--- /dev/null
+++ b/include/asm-m68k/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_SECTIONS_H
+#define _ASM_M68K_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_M68K_SECTIONS_H */
diff --git a/include/asm-m68k/segment.h b/include/asm-m68k/segment.h
new file mode 100644
index 000000000000..7b0b2d3127f9
--- /dev/null
+++ b/include/asm-m68k/segment.h
@@ -0,0 +1,57 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+	mm_segment_t _v;
+	__asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
+
+	return _v;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+	__asm__ __volatile__ ("movec %0,%/sfc\n\t"
+			      "movec %0,%/dfc\n\t"
+			      : /* no outputs */ : "r" (val.seg) : "memory");
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/include/asm-m68k/semaphore-helper.h b/include/asm-m68k/semaphore-helper.h
new file mode 100644
index 000000000000..1516a642f9a5
--- /dev/null
+++ b/include/asm-m68k/semaphore-helper.h
@@ -0,0 +1,143 @@
+#ifndef _M68K_SEMAPHORE_HELPER_H
+#define _M68K_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc(&sem->waking);
+}
+
+#ifndef CONFIG_RMW_INSNS
+extern spinlock_t semaphore_wake_lock;
+#endif
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+	int ret;
+#ifndef CONFIG_RMW_INSNS
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+#else
+	int tmp1, tmp2;
+
+	__asm__ __volatile__
+	  ("1:	movel	%1,%2\n"
+	   "    jle	2f\n"
+	   "	subql	#1,%2\n"
+	   "	casl	%1,%2,%3\n"
+	   "	jne	1b\n"
+	   "	moveq	#1,%0\n"
+	   "2:"
+	   : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
+	   : "m" (sem->waking), "0" (0), "1" (sem->waking));
+#endif
+
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	int ret;
+#ifndef CONFIG_RMW_INSNS
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+#else
+	int tmp1, tmp2;
+
+	__asm__ __volatile__
+	  ("1:	movel	%1,%2\n"
+	   "	jle	2f\n"
+	   "	subql	#1,%2\n"
+	   "	casl	%1,%2,%3\n"
+	   "	jne	1b\n"
+	   "	moveq	#1,%0\n"
+	   "	jra	%a4\n"
+	   "2:"
+	   : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
+	   : "m" (sem->waking), "i" (&&next), "0" (0), "1" (sem->waking));
+	if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+next:
+#endif
+
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+	int ret;
+#ifndef CONFIG_RMW_INSNS
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 1;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 0;
+	} else
+		atomic_inc(&sem->count);
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+#else
+	int tmp1, tmp2;
+
+	__asm__ __volatile__
+	  ("1:	movel	%1,%2\n"
+	   "    jle	2f\n"
+	   "	subql	#1,%2\n"
+	   "	casl	%1,%2,%3\n"
+	   "	jne	1b\n"
+	   "	moveq	#0,%0\n"
+	   "2:"
+	   : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
+	   : "m" (sem->waking), "0" (1), "1" (sem->waking));
+	if (ret)
+		atomic_inc(&sem->count);
+#endif
+	return ret;
+}
+
+#endif
diff --git a/include/asm-m68k/semaphore.h b/include/asm-m68k/semaphore.h
new file mode 100644
index 000000000000..ab94cf3ed447
--- /dev/null
+++ b/include/asm-m68k/semaphore.h
@@ -0,0 +1,167 @@
+#ifndef _M68K_SEMAPHORE_H
+#define _M68K_SEMAPHORE_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <linux/stringify.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+/*
+ * Interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+
+struct semaphore {
+	atomic_t count;
+	atomic_t waking;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.waking		= ATOMIC_INIT(0),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits. See arch/m68k/lib/semaphore.S
+ */
+static inline void down(struct semaphore *sem)
+{
+	register struct semaphore *sem1 __asm__ ("%a1") = sem;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"| atomic down operation\n\t"
+		"subql #1,%0@\n\t"
+		"jmi 2f\n\t"
+		"1:\n"
+		LOCK_SECTION_START(".even\n\t")
+		"2:\tpea 1b\n\t"
+		"jbra __down_failed\n"
+		LOCK_SECTION_END
+		: /* no outputs */
+		: "a" (sem1)
+		: "memory");
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+	register struct semaphore *sem1 __asm__ ("%a1") = sem;
+	register int result __asm__ ("%d0");
+
+	might_sleep();
+	__asm__ __volatile__(
+		"| atomic interruptible down operation\n\t"
+		"subql #1,%1@\n\t"
+		"jmi 2f\n\t"
+		"clrl %0\n"
+		"1:\n"
+		LOCK_SECTION_START(".even\n\t")
+		"2:\tpea 1b\n\t"
+		"jbra __down_failed_interruptible\n"
+		LOCK_SECTION_END
+		: "=d" (result)
+		: "a" (sem1)
+		: "memory");
+	return result;
+}
+
+static inline int down_trylock(struct semaphore *sem)
+{
+	register struct semaphore *sem1 __asm__ ("%a1") = sem;
+	register int result __asm__ ("%d0");
+
+	__asm__ __volatile__(
+		"| atomic down trylock operation\n\t"
+		"subql #1,%1@\n\t"
+		"jmi 2f\n\t"
+		"clrl %0\n"
+		"1:\n"
+		LOCK_SECTION_START(".even\n\t")
+		"2:\tpea 1b\n\t"
+		"jbra __down_failed_trylock\n"
+		LOCK_SECTION_END
+		: "=d" (result)
+		: "a" (sem1)
+		: "memory");
+	return result;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore *sem)
+{
+	register struct semaphore *sem1 __asm__ ("%a1") = sem;
+
+	__asm__ __volatile__(
+		"| atomic up operation\n\t"
+		"addql #1,%0@\n\t"
+		"jle 2f\n"
+		"1:\n"
+		LOCK_SECTION_START(".even\n\t")
+		"2:\t"
+		"pea 1b\n\t"
+		"jbra __up_wakeup\n"
+		LOCK_SECTION_END
+		: /* no outputs */
+		: "a" (sem1)
+		: "memory");
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-m68k/sembuf.h b/include/asm-m68k/sembuf.h
new file mode 100644
index 000000000000..2308052a8c24
--- /dev/null
+++ b/include/asm-m68k/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _M68K_SEMBUF_H
+#define _M68K_SEMBUF_H
+
+/*
+ * The semid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _M68K_SEMBUF_H */
diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h
new file mode 100644
index 000000000000..9f5bcdc105fc
--- /dev/null
+++ b/include/asm-m68k/serial.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-m68k/serial.h
+ *
+ * currently this seems useful only for a Q40,
+ * it's an almost exact copy of ../asm-alpha/serial.h
+ *
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#endif
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS },	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-m68k/setup.h b/include/asm-m68k/setup.h
new file mode 100644
index 000000000000..9e23492685eb
--- /dev/null
+++ b/include/asm-m68k/setup.h
@@ -0,0 +1,375 @@
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+**   Added bi_atari part of the machine dependent union bi_un; for now it
+**   contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+**   Renamed to setup.h; added some useful macros to allow gcc some
+**   optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+**   Redesign of the boot information structure; moved boot information
+**   structure to bootinfo.h
+*/
+
+#ifndef _M68K_SETUP_H
+#define _M68K_SETUP_H
+
+#include <linux/config.h>
+
+
+    /*
+     *  Linux/m68k Architectures
+     */
+
+#define MACH_AMIGA    1
+#define MACH_ATARI    2
+#define MACH_MAC      3
+#define MACH_APOLLO   4
+#define MACH_SUN3     5
+#define MACH_MVME147  6
+#define MACH_MVME16x  7
+#define MACH_BVME6000 8
+#define MACH_HP300    9
+#define MACH_Q40     10
+#define MACH_SUN3X   11
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_machtype;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_AMIGA)
+#  define MACH_IS_AMIGA (0)
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
+#else
+#  define MACH_AMIGA_ONLY
+#  define MACH_IS_AMIGA (1)
+#  define MACH_TYPE (MACH_AMIGA)
+#endif
+
+#if !defined(CONFIG_ATARI)
+#  define MACH_IS_ATARI (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+#else
+#  define MACH_ATARI_ONLY
+#  define MACH_IS_ATARI (1)
+#  define MACH_TYPE (MACH_ATARI)
+#endif
+
+#if !defined(CONFIG_MAC)
+#  define MACH_IS_MAC (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+#else
+#  define MACH_MAC_ONLY
+#  define MACH_IS_MAC (1)
+#  define MACH_TYPE (MACH_MAC)
+#endif
+
+#if defined(CONFIG_SUN3)
+#define MACH_IS_SUN3 (1)
+#define MACH_SUN3_ONLY (1)
+#define MACH_TYPE (MACH_SUN3)
+#else
+#define MACH_IS_SUN3 (0)
+#endif
+
+#if !defined (CONFIG_APOLLO)
+#  define MACH_IS_APOLLO (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+#else
+#  define MACH_APOLLO_ONLY
+#  define MACH_IS_APOLLO (1)
+#  define MACH_TYPE (MACH_APOLLO)
+#endif
+
+#if !defined (CONFIG_MVME147)
+#  define MACH_IS_MVME147 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+#else
+#  define MACH_MVME147_ONLY
+#  define MACH_IS_MVME147 (1)
+#  define MACH_TYPE (MACH_MVME147)
+#endif
+
+#if !defined (CONFIG_MVME16x)
+#  define MACH_IS_MVME16x (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+#else
+#  define MACH_MVME16x_ONLY
+#  define MACH_IS_MVME16x (1)
+#  define MACH_TYPE (MACH_MVME16x)
+#endif
+
+#if !defined (CONFIG_BVME6000)
+#  define MACH_IS_BVME6000 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+#else
+#  define MACH_BVME6000_ONLY
+#  define MACH_IS_BVME6000 (1)
+#  define MACH_TYPE (MACH_BVME6000)
+#endif
+
+#if !defined (CONFIG_HP300)
+#  define MACH_IS_HP300 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+#else
+#  define MACH_HP300_ONLY
+#  define MACH_IS_HP300 (1)
+#  define MACH_TYPE (MACH_HP300)
+#endif
+
+#if !defined (CONFIG_Q40)
+#  define MACH_IS_Q40 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+#else
+#  define MACH_Q40_ONLY
+#  define MACH_IS_Q40 (1)
+#  define MACH_TYPE (MACH_Q40)
+#endif
+
+#if !defined (CONFIG_SUN3X)
+#  define MACH_IS_SUN3X (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+	|| defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+#else
+#  define CONFIG_SUN3X_ONLY
+#  define MACH_IS_SUN3X (1)
+#  define MACH_TYPE (MACH_SUN3X)
+#endif
+
+#ifndef MACH_TYPE
+#  define MACH_TYPE (m68k_machtype)
+#endif
+
+#endif /* __KERNEL__ */
+
+
+    /*
+     *  CPU, FPU and MMU types
+     *
+     *  Note: we may rely on the following equalities:
+     *
+     *      CPU_68020 == MMU_68851
+     *      CPU_68030 == MMU_68030
+     *      CPU_68040 == FPU_68040 == MMU_68040
+     *      CPU_68060 == FPU_68060 == MMU_68060
+     */
+
+#define CPUB_68020     0
+#define CPUB_68030     1
+#define CPUB_68040     2
+#define CPUB_68060     3
+
+#define CPU_68020      (1<<CPUB_68020)
+#define CPU_68030      (1<<CPUB_68030)
+#define CPU_68040      (1<<CPUB_68040)
+#define CPU_68060      (1<<CPUB_68060)
+
+#define FPUB_68881     0
+#define FPUB_68882     1
+#define FPUB_68040     2                       /* Internal FPU */
+#define FPUB_68060     3                       /* Internal FPU */
+#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
+
+#define FPU_68881      (1<<FPUB_68881)
+#define FPU_68882      (1<<FPUB_68882)
+#define FPU_68040      (1<<FPUB_68040)
+#define FPU_68060      (1<<FPUB_68060)
+#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+
+#define MMUB_68851     0
+#define MMUB_68030     1                       /* Internal MMU */
+#define MMUB_68040     2                       /* Internal MMU */
+#define MMUB_68060     3                       /* Internal MMU */
+#define MMUB_APOLLO    4                       /* Custom Apollo */
+#define MMUB_SUN3      5                       /* Custom Sun-3 */
+
+#define MMU_68851      (1<<MMUB_68851)
+#define MMU_68030      (1<<MMUB_68030)
+#define MMU_68040      (1<<MMUB_68040)
+#define MMU_68060      (1<<MMUB_68060)
+#define MMU_SUN3       (1<<MMUB_SUN3)
+#define MMU_APOLLO     (1<<MMUB_APOLLO)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_cputype;
+extern unsigned long m68k_fputype;
+extern unsigned long m68k_mmutype;		/* Not really used yet */
+#ifdef CONFIG_VME
+extern unsigned long vme_brdtype;
+#endif
+
+    /*
+     *  m68k_is040or060 is != 0 for a '040 or higher;
+     *  used numbers are 4 for 68040 and 6 for 68060.
+     */
+
+extern int m68k_is040or060;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_M68020)
+#  define CPU_IS_020 (0)
+#  define MMU_IS_851 (0)
+#  define MMU_IS_SUN3 (0)
+#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_020 (m68k_cputype & CPU_68020)
+#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
+#  define MMU_IS_SUN3 (0)	/* Sun3 not supported with other CPU enabled */
+#else
+#  define CPU_M68020_ONLY
+#  define CPU_IS_020 (1)
+#ifdef MACH_SUN3_ONLY
+#  define MMU_IS_SUN3 (1)
+#  define MMU_IS_851 (0)
+#else
+#  define MMU_IS_SUN3 (0)
+#  define MMU_IS_851 (1)
+#endif
+#endif
+
+#if !defined(CONFIG_M68030)
+#  define CPU_IS_030 (0)
+#  define MMU_IS_030 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_030 (m68k_cputype & CPU_68030)
+#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
+#else
+#  define CPU_M68030_ONLY
+#  define CPU_IS_030 (1)
+#  define MMU_IS_030 (1)
+#endif
+
+#if !defined(CONFIG_M68040)
+#  define CPU_IS_040 (0)
+#  define MMU_IS_040 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+#  define CPU_IS_040 (m68k_cputype & CPU_68040)
+#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
+#else
+#  define CPU_M68040_ONLY
+#  define CPU_IS_040 (1)
+#  define MMU_IS_040 (1)
+#endif
+
+#if !defined(CONFIG_M68060)
+#  define CPU_IS_060 (0)
+#  define MMU_IS_060 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+#  define CPU_IS_060 (m68k_cputype & CPU_68060)
+#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
+#else
+#  define CPU_M68060_ONLY
+#  define CPU_IS_060 (1)
+#  define MMU_IS_060 (1)
+#endif
+
+#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+#  define CPU_IS_020_OR_030 (0)
+#else
+#  define CPU_M68020_OR_M68030
+#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#    define CPU_IS_020_OR_030 (!m68k_is040or060)
+#  else
+#    define CPU_M68020_OR_M68030_ONLY
+#    define CPU_IS_020_OR_030 (1)
+#  endif
+#endif
+
+#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+#  define CPU_IS_040_OR_060 (0)
+#else
+#  define CPU_M68040_OR_M68060
+#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#    define CPU_IS_040_OR_060 (m68k_is040or060)
+#  else
+#    define CPU_M68040_OR_M68060_ONLY
+#    define CPU_IS_040_OR_060 (1)
+#  endif
+#endif
+
+#define CPU_TYPE (m68k_cputype)
+
+#ifdef CONFIG_M68KFPU_EMU
+#  ifdef CONFIG_M68KFPU_EMU_ONLY
+#    define FPU_IS_EMU (1)
+#  else
+#    define FPU_IS_EMU (!m68k_fputype)
+#  endif
+#else
+#  define FPU_IS_EMU (0)
+#endif
+
+
+    /*
+     *  Miscellaneous
+     */
+
+#define NUM_MEMINFO	4
+#define CL_SIZE		256
+#define COMMAND_LINE_SIZE	CL_SIZE
+
+#ifndef __ASSEMBLY__
+extern int m68k_num_memory;		/* # of memory blocks found (and used) */
+extern int m68k_realnum_memory;		/* real # of memory blocks found */
+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+
+struct mem_info {
+	unsigned long addr;		/* physical address of memory chunk */
+	unsigned long size;		/* length of memory chunk (in bytes) */
+};
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SETUP_H */
diff --git a/include/asm-m68k/shm.h b/include/asm-m68k/shm.h
new file mode 100644
index 000000000000..3fa2f368fc1a
--- /dev/null
+++ b/include/asm-m68k/shm.h
@@ -0,0 +1,32 @@
+#ifndef _M68K_SHM_H
+#define _M68K_SHM_H
+
+#include <linux/config.h>
+
+/* format of page table entries that correspond to shared memory pages
+   currently out in swap space (see also mm/swap.c):
+   bits 0-1 (PAGE_PRESENT) is  = 0
+   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
+   bits 31..9 are used like this:
+   bits 15..9 (SHM_ID) the id of the shared memory segment
+   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
+                    (actually only bits 25..16 get used since SHMMAX is so low)
+   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
+*/
+/* on the m68k both bits 0 and 1 must be zero */
+/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
+   others are reduced by 2. --m */
+
+#ifndef CONFIG_SUN3
+#define SHM_ID_SHIFT	9
+#else
+#define SHM_ID_SHIFT	7
+#endif
+#define _SHM_ID_BITS	7
+#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
+
+#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
+#define _SHM_IDX_BITS	15
+#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
+
+#endif /* _M68K_SHM_H */
diff --git a/include/asm-m68k/shmbuf.h b/include/asm-m68k/shmbuf.h
new file mode 100644
index 000000000000..f8928d62f1b7
--- /dev/null
+++ b/include/asm-m68k/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _M68K_SHMBUF_H
+#define _M68K_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _M68K_SHMBUF_H */
diff --git a/include/asm-m68k/shmparam.h b/include/asm-m68k/shmparam.h
new file mode 100644
index 000000000000..558892a2efb3
--- /dev/null
+++ b/include/asm-m68k/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_SHMPARAM_H
+#define _M68K_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _M68K_SHMPARAM_H */
diff --git a/include/asm-m68k/sigcontext.h b/include/asm-m68k/sigcontext.h
new file mode 100644
index 000000000000..64fbe34cf26f
--- /dev/null
+++ b/include/asm-m68k/sigcontext.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_M68k_SIGCONTEXT_H
+#define _ASM_M68k_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask;		/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_d0;
+	unsigned long  sc_d1;
+	unsigned long  sc_a0;
+	unsigned long  sc_a1;
+	unsigned short sc_sr;
+	unsigned long  sc_pc;
+	unsigned short sc_formatvec;
+	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
+	unsigned long  sc_fpcntl[3];
+	unsigned char  sc_fpstate[216];
+};
+
+#endif
diff --git a/include/asm-m68k/siginfo.h b/include/asm-m68k/siginfo.h
new file mode 100644
index 000000000000..05a8d6d90b58
--- /dev/null
+++ b/include/asm-m68k/siginfo.h
@@ -0,0 +1,92 @@
+#ifndef _M68K_SIGINFO_H
+#define _M68K_SIGINFO_H
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			sigval_t _sigval;
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			__kernel_pid_t _pid;	/* which child */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void *_addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+/*
+ * How these fields are to be accessed.
+ */
+#undef si_uid
+#ifdef __KERNEL__
+#define si_uid		_sifields._kill._uid32
+#define si_uid16	_sifields._kill._uid
+#else
+#define si_uid		_sifields._kill._uid
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-m68k/signal.h b/include/asm-m68k/signal.h
new file mode 100644
index 000000000000..6681bb6a5523
--- /dev/null
+++ b/include/asm-m68k/signal.h
@@ -0,0 +1,220 @@
+#ifndef _M68K_SIGNAL_H
+#define _M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+	__asm__("bfset %0{%1,#1}" : "=m" (*set) : "id" ((_sig - 1) ^ 31)
+		: "cc");
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+	__asm__("bfclr %0{%1,#1}" : "=m"(*set) : "id"((_sig - 1) ^ 31)
+		: "cc");
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	__asm__("bfextu %1{%2,#1},%0"
+		: "=d"(ret) : "m"(*set), "id"((_sig-1) ^ 31));
+	return ret;
+}
+
+#define sigismember(set,sig)			\
+	(__builtin_constant_p(sig) ?		\
+	 __const_sigismember(set,sig) :		\
+	 __gen_sigismember(set,sig))
+
+static inline int sigfindinword(unsigned long word)
+{
+	__asm__("bfffo %1{#0,#0},%0" : "=d"(word) : "d"(word & -word) : "cc");
+	return word ^ 31;
+}
+
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SIGNAL_H */
diff --git a/include/asm-m68k/socket.h b/include/asm-m68k/socket.h
new file mode 100644
index 000000000000..8d0b9fc2d07e
--- /dev/null
+++ b/include/asm-m68k/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-m68k/sockios.h b/include/asm-m68k/sockios.h
new file mode 100644
index 000000000000..9b9ed973c24e
--- /dev/null
+++ b/include/asm-m68k/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68K_SOCKIOS__
+#define __ARCH_M68K_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* __ARCH_M68K_SOCKIOS__ */
diff --git a/include/asm-m68k/spinlock.h b/include/asm-m68k/spinlock.h
new file mode 100644
index 000000000000..20f46e27b534
--- /dev/null
+++ b/include/asm-m68k/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __M68K_SPINLOCK_H
+#define __M68K_SPINLOCK_H
+
+#error "m68k doesn't do SMP yet"
+
+#endif
diff --git a/include/asm-m68k/stat.h b/include/asm-m68k/stat.h
new file mode 100644
index 000000000000..c4c402a45e21
--- /dev/null
+++ b/include/asm-m68k/stat.h
@@ -0,0 +1,78 @@
+#ifndef _M68K_STAT_H
+#define _M68K_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  __unused1;
+	unsigned long  st_mtime;
+	unsigned long  __unused2;
+	unsigned long  st_ctime;
+	unsigned long  __unused3;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[2];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif /* _M68K_STAT_H */
diff --git a/include/asm-m68k/statfs.h b/include/asm-m68k/statfs.h
new file mode 100644
index 000000000000..08d93f14e061
--- /dev/null
+++ b/include/asm-m68k/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_STATFS_H
+#define _M68K_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _M68K_STATFS_H */
diff --git a/include/asm-m68k/string.h b/include/asm-m68k/string.h
new file mode 100644
index 000000000000..44def078132a
--- /dev/null
+++ b/include/asm-m68k/string.h
@@ -0,0 +1,542 @@
+#ifndef _M68K_STRING_H_
+#define _M68K_STRING_H_
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+  char *xdest = dest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jne 1b"
+	: "=a" (dest), "=a" (src)
+        : "0" (dest), "1" (src) : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+  char *xdest = dest;
+
+  if (n == 0)
+    return xdest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+	"jeq 2f\n\t"
+        "subql #1,%2\n\t"
+        "jne 1b\n\t"
+        "2:"
+        : "=a" (dest), "=a" (src), "=d" (n)
+        : "0" (dest), "1" (src), "2" (n)
+        : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRCAT
+static inline char * strcat(char * dest, const char * src)
+{
+	char *tmp = dest;
+
+	while (*dest)
+		dest++;
+	while ((*dest++ = *src++))
+		;
+
+	return tmp;
+}
+
+#define __HAVE_ARCH_STRNCAT
+static inline char * strncat(char *dest, const char *src, size_t count)
+{
+	char *tmp = dest;
+
+	if (count) {
+		while (*dest)
+			dest++;
+		while ((*dest++ = *src++)) {
+			if (--count == 0) {
+				*dest++='\0';
+				break;
+			}
+		}
+	}
+
+	return tmp;
+}
+
+#define __HAVE_ARCH_STRCHR
+static inline char * strchr(const char * s, int c)
+{
+  const char ch = c;
+
+  for(; *s != ch; ++s)
+    if (*s == '\0')
+      return( NULL );
+  return( (char *) s);
+}
+
+#if 0
+#define __HAVE_ARCH_STRPBRK
+static inline char *strpbrk(const char *cs,const char *ct)
+{
+  const char *sc1,*sc2;
+
+  for( sc1 = cs; *sc1 != '\0'; ++sc1)
+    for( sc2 = ct; *sc2 != '\0'; ++sc2)
+      if (*sc1 == *sc2)
+	return((char *) sc1);
+  return( NULL );
+}
+#endif
+
+#if 0
+#define __HAVE_ARCH_STRSPN
+static inline size_t strspn(const char *s, const char *accept)
+{
+  const char *p;
+  const char *a;
+  size_t count = 0;
+
+  for (p = s; *p != '\0'; ++p)
+    {
+      for (a = accept; *a != '\0'; ++a)
+        if (*p == *a)
+          break;
+      if (*a == '\0')
+        return count;
+      else
+        ++count;
+    }
+
+  return count;
+}
+#endif
+
+/* strstr !! */
+
+#define __HAVE_ARCH_STRLEN
+static inline size_t strlen(const char * s)
+{
+  const char *sc;
+  for (sc = s; *sc != '\0'; ++sc) ;
+  return(sc - s);
+}
+
+/* strnlen !! */
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+  char __res;
+
+  __asm__
+       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+        "cmpb %1@+,%2\n\t"      /* compare a byte */
+        "jne  2f\n\t"           /* not equal, break out */
+        "tstb %2\n\t"           /* at end of cs? */
+        "jne  1b\n\t"           /* no, keep going */
+        "jra  3f\n\t"		/* strings are equal */
+        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
+        "3:"
+        : "=a" (cs), "=a" (ct), "=d" (__res)
+        : "0" (cs), "1" (ct));
+  return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+  char __res;
+
+  if (!count)
+    return 0;
+  __asm__
+       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
+        "cmpb   %1@+,%3\n\t"            /* compare a byte */
+        "jne    3f\n\t"                 /* not equal, break out */
+        "tstb   %3\n\t"                 /* at end of cs? */
+        "jeq    4f\n\t"                 /* yes, all done */
+        "subql  #1,%2\n\t"              /* no, adjust count */
+        "jne    1b\n\t"                 /* more to do, keep going */
+        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
+        "jra    4f\n\t"
+        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
+        "4:"
+        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+        : "0" (cs), "1" (ct), "2" (count));
+  return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+/*
+ * This is really ugly, but its highly optimizatiable by the
+ * compiler and is meant as compensation for gcc's missing
+ * __builtin_memset(). For the 680[23]0	it might be worth considering
+ * the optimal number of misaligned writes compared to the number of
+ * tests'n'branches needed to align the destination address. The
+ * 680[46]0 doesn't really care due to their copy-back caches.
+ *						10/09/96 - Jes Sorensen
+ */
+static inline void * __memset_g(void * s, int c, size_t count)
+{
+  void *xs = s;
+  size_t temp;
+
+  if (!count)
+    return xs;
+
+  c &= 0xff;
+  c |= c << 8;
+  c |= c << 16;
+
+  if (count < 36){
+	  long *ls = s;
+
+	  switch(count){
+	  case 32: case 33: case 34: case 35:
+		  *ls++ = c;
+	  case 28: case 29: case 30: case 31:
+		  *ls++ = c;
+	  case 24: case 25: case 26: case 27:
+		  *ls++ = c;
+	  case 20: case 21: case 22: case 23:
+		  *ls++ = c;
+	  case 16: case 17: case 18: case 19:
+		  *ls++ = c;
+	  case 12: case 13: case 14: case 15:
+		  *ls++ = c;
+	  case 8: case 9: case 10: case 11:
+		  *ls++ = c;
+	  case 4: case 5: case 6: case 7:
+		  *ls++ = c;
+		  break;
+	  default:
+		  break;
+	  }
+	  s = ls;
+	  if (count & 0x02){
+		  short *ss = s;
+		  *ss++ = c;
+		  s = ss;
+	  }
+	  if (count & 0x01){
+		  char *cs = s;
+		  *cs++ = c;
+		  s = cs;
+	  }
+	  return xs;
+  }
+
+  if ((long) s & 1)
+    {
+      char *cs = s;
+      *cs++ = c;
+      s = cs;
+      count--;
+    }
+  if (count > 2 && (long) s & 2)
+    {
+      short *ss = s;
+      *ss++ = c;
+      s = ss;
+      count -= 2;
+    }
+  temp = count >> 2;
+  if (temp)
+    {
+      long *ls = s;
+      temp--;
+      do
+	*ls++ = c;
+      while (temp--);
+      s = ls;
+    }
+  if (count & 2)
+    {
+      short *ss = s;
+      *ss++ = c;
+      s = ss;
+    }
+  if (count & 1)
+    {
+      char *cs = s;
+      *cs = c;
+    }
+  return xs;
+}
+
+/*
+ * __memset_page assumes that data is longword aligned. Most, if not
+ * all, of these page sized memsets are performed on page aligned
+ * areas, thus we do not need to check if the destination is longword
+ * aligned. Of course we suffer a serious performance loss if this is
+ * not the case but I think the risk of this ever happening is
+ * extremely small. We spend a lot of time clearing pages in
+ * get_empty_page() so I think it is worth it anyway. Besides, the
+ * 680[46]0 do not really care about misaligned writes due to their
+ * copy-back cache.
+ *
+ * The optimized case for the 680[46]0 is implemented using the move16
+ * instruction. My tests showed that this implementation is 35-45%
+ * faster than the original implementation using movel, the only
+ * caveat is that the destination address must be 16-byte aligned.
+ *                                            01/09/96 - Jes Sorensen
+ */
+static inline void * __memset_page(void * s,int c,size_t count)
+{
+  unsigned long data, tmp;
+  void *xs = s;
+
+  c = c & 255;
+  data = c | (c << 8);
+  data |= data << 16;
+
+#ifdef CPU_M68040_OR_M68060_ONLY
+
+  if (((unsigned long) s) & 0x0f)
+	  __memset_g(s, c, count);
+  else{
+	  unsigned long *sp = s;
+	  *sp++ = data;
+	  *sp++ = data;
+	  *sp++ = data;
+	  *sp++ = data;
+
+	  __asm__ __volatile__("1:\t"
+			       ".chip 68040\n\t"
+			       "move16 %2@+,%0@+\n\t"
+			       ".chip 68k\n\t"
+			       "subqw  #8,%2\n\t"
+			       "subqw  #8,%2\n\t"
+			       "dbra   %1,1b\n\t"
+			       : "=a" (sp), "=d" (tmp)
+			       : "a" (s), "0" (sp), "1" ((count - 16) / 16 - 1)
+			       );
+  }
+
+#else
+  __asm__ __volatile__("1:\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "movel %2,%0@+\n\t"
+		       "dbra  %1,1b\n\t"
+		       : "=a" (s), "=d" (tmp)
+		       : "d" (data), "0" (s), "1" (count / 32 - 1)
+		       );
+#endif
+
+  return xs;
+}
+
+extern void *memset(void *,int,__kernel_size_t);
+
+#define __memset_const(s,c,count) \
+((count==PAGE_SIZE) ? \
+  __memset_page((s),(c),(count)) : \
+  __memset_g((s),(c),(count)))
+
+#define memset(s, c, count) \
+(__builtin_constant_p(count) ? \
+ __memset_const((s),(c),(count)) : \
+ __memset_g((s),(c),(count)))
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, size_t );
+/*
+ * __builtin_memcpy() does not handle page-sized memcpys very well,
+ * thus following the same assumptions as for page-sized memsets, this
+ * function copies page-sized areas using an unrolled loop, without
+ * considering alignment.
+ *
+ * For the 680[46]0 only kernels we use the move16 instruction instead
+ * as it writes through the data-cache, invalidating the cache-lines
+ * touched. In this way we do not use up the entire data-cache (well,
+ * half of it on the 68060) by copying a page. An unrolled loop of two
+ * move16 instructions seem to the fastest. The only caveat is that
+ * both source and destination must be 16-byte aligned, if not we fall
+ * back to the generic memcpy function.  - Jes
+ */
+static inline void * __memcpy_page(void * to, const void * from, size_t count)
+{
+  unsigned long tmp;
+  void *xto = to;
+
+#ifdef CPU_M68040_OR_M68060_ONLY
+
+  if (((unsigned long) to | (unsigned long) from) & 0x0f)
+	  return memcpy(to, from, count);
+
+  __asm__ __volatile__("1:\t"
+		       ".chip 68040\n\t"
+		       "move16 %1@+,%0@+\n\t"
+		       "move16 %1@+,%0@+\n\t"
+		       ".chip 68k\n\t"
+		       "dbra  %2,1b\n\t"
+		       : "=a" (to), "=a" (from), "=d" (tmp)
+		       : "0" (to), "1" (from) , "2" (count / 32 - 1)
+		       );
+#else
+  __asm__ __volatile__("1:\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "movel %1@+,%0@+\n\t"
+		       "dbra  %2,1b\n\t"
+		       : "=a" (to), "=a" (from), "=d" (tmp)
+		       : "0" (to), "1" (from) , "2" (count / 32 - 1)
+		       );
+#endif
+  return xto;
+}
+
+#define __memcpy_const(to, from, n) \
+((n==PAGE_SIZE) ? \
+  __memcpy_page((to),(from),(n)) : \
+  __builtin_memcpy((to),(from),(n)))
+
+#define memcpy(to, from, n) \
+(__builtin_constant_p(n) ? \
+ __memcpy_const((to),(from),(n)) : \
+ memcpy((to),(from),(n)))
+
+#define __HAVE_ARCH_MEMMOVE
+static inline void * memmove(void * dest,const void * src, size_t n)
+{
+  void *xdest = dest;
+  size_t temp;
+
+  if (!n)
+    return xdest;
+
+  if (dest < src)
+    {
+      if ((long) dest & 1)
+	{
+	  char *cdest = dest;
+	  const char *csrc = src;
+	  *cdest++ = *csrc++;
+	  dest = cdest;
+	  src = csrc;
+	  n--;
+	}
+      if (n > 2 && (long) dest & 2)
+	{
+	  short *sdest = dest;
+	  const short *ssrc = src;
+	  *sdest++ = *ssrc++;
+	  dest = sdest;
+	  src = ssrc;
+	  n -= 2;
+	}
+      temp = n >> 2;
+      if (temp)
+	{
+	  long *ldest = dest;
+	  const long *lsrc = src;
+	  temp--;
+	  do
+	    *ldest++ = *lsrc++;
+	  while (temp--);
+	  dest = ldest;
+	  src = lsrc;
+	}
+      if (n & 2)
+	{
+	  short *sdest = dest;
+	  const short *ssrc = src;
+	  *sdest++ = *ssrc++;
+	  dest = sdest;
+	  src = ssrc;
+	}
+      if (n & 1)
+	{
+	  char *cdest = dest;
+	  const char *csrc = src;
+	  *cdest = *csrc;
+	}
+    }
+  else
+    {
+      dest = (char *) dest + n;
+      src = (const char *) src + n;
+      if ((long) dest & 1)
+	{
+	  char *cdest = dest;
+	  const char *csrc = src;
+	  *--cdest = *--csrc;
+	  dest = cdest;
+	  src = csrc;
+	  n--;
+	}
+      if (n > 2 && (long) dest & 2)
+	{
+	  short *sdest = dest;
+	  const short *ssrc = src;
+	  *--sdest = *--ssrc;
+	  dest = sdest;
+	  src = ssrc;
+	  n -= 2;
+	}
+      temp = n >> 2;
+      if (temp)
+	{
+	  long *ldest = dest;
+	  const long *lsrc = src;
+	  temp--;
+	  do
+	    *--ldest = *--lsrc;
+	  while (temp--);
+	  dest = ldest;
+	  src = lsrc;
+	}
+      if (n & 2)
+	{
+	  short *sdest = dest;
+	  const short *ssrc = src;
+	  *--sdest = *--ssrc;
+	  dest = sdest;
+	  src = ssrc;
+	}
+      if (n & 1)
+	{
+	  char *cdest = dest;
+	  const char *csrc = src;
+	  *--cdest = *--csrc;
+	}
+    }
+  return xdest;
+}
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void * ,const void * ,size_t );
+#define memcmp(cs, ct, n) \
+(__builtin_constant_p(n) ? \
+ __builtin_memcmp((cs),(ct),(n)) : \
+ memcmp((cs),(ct),(n)))
+
+#define __HAVE_ARCH_MEMCHR
+static inline void *memchr(const void *cs, int c, size_t count)
+{
+	/* Someone else can optimize this, I don't care - tonym@mac.linux-m68k.org */
+	unsigned char *ret = (unsigned char *)cs;
+	for(;count>0;count--,ret++)
+		if(*ret == c) return ret;
+
+	return NULL;
+}
+
+#endif /* _M68K_STRING_H_ */
diff --git a/include/asm-m68k/sun3-head.h b/include/asm-m68k/sun3-head.h
new file mode 100644
index 000000000000..f799d95bad53
--- /dev/null
+++ b/include/asm-m68k/sun3-head.h
@@ -0,0 +1,12 @@
+/* $Id: head.h,v 1.32 1996/12/04 00:12:48 ecd Exp $ */
+#ifndef __SUN3_HEAD_H
+#define __SUN3_HEAD_H
+
+#define KERNBASE        0xE000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define BI_START (KERNBASE + 0x3000) /* beginning of the bootinfo records */
+#define FC_CONTROL  3
+#define FC_SUPERD    5
+#define FC_CPU      7
+
+#endif /* __SUN3_HEAD_H */
diff --git a/include/asm-m68k/sun3_pgalloc.h b/include/asm-m68k/sun3_pgalloc.h
new file mode 100644
index 000000000000..fd8241117649
--- /dev/null
+++ b/include/asm-m68k/sun3_pgalloc.h
@@ -0,0 +1,95 @@
+/* sun3_pgalloc.h --
+ * reorganization around 2.3.39, routines moved from sun3_pgtable.h
+ *
+ *
+ * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam)
+ *
+ * moved 1/26/2000 Sam Creasey
+ */
+
+#ifndef _SUN3_PGALLOC_H
+#define _SUN3_PGALLOC_H
+
+#include <asm/tlb.h>
+
+/* FIXME - when we get this compiling */
+/* erm, now that it's compiling, what do we do with it? */
+#define _KERNPG_TABLE 0
+
+extern const char bad_pmd_string[];
+
+#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
+
+
+static inline void pte_free_kernel(pte_t * pte)
+{
+        free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct page *page)
+{
+        __free_page(page);
+}
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
+
+	if (!page)
+		return NULL;
+
+	memset((void *)page, 0, PAGE_SIZE);
+	return (pte_t *) (page);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+					 unsigned long address)
+{
+        struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+
+	if (page == NULL)
+		return NULL;
+
+	clear_highpage(page);
+	return page;
+
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	pmd_val(*pmd) = __pa((unsigned long)pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+{
+	pmd_val(*pmd) = __pa((unsigned long)page_address(page));
+}
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+
+static inline void pgd_free(pgd_t * pgd)
+{
+        free_page((unsigned long) pgd);
+}
+
+static inline pgd_t * pgd_alloc(struct mm_struct *mm)
+{
+     pgd_t *new_pgd;
+
+     new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+     memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+     memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
+     return new_pgd;
+}
+
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#endif /* SUN3_PGALLOC_H */
diff --git a/include/asm-m68k/sun3_pgtable.h b/include/asm-m68k/sun3_pgtable.h
new file mode 100644
index 000000000000..e974bb072047
--- /dev/null
+++ b/include/asm-m68k/sun3_pgtable.h
@@ -0,0 +1,238 @@
+#ifndef _SUN3_PGTABLE_H
+#define _SUN3_PGTABLE_H
+
+#include <asm/sun3mmu.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/virtconvert.h>
+#include <linux/linkage.h>
+
+/*
+ * This file contains all the things which change drastically for the sun3
+ * pagetable stuff, to avoid making too much of a mess of the generic m68k
+ * `pgtable.h'; this should only be included from the generic file. --m
+ */
+
+/* For virtual address to physical address conversion */
+#define VTOP(addr)	__pa(addr)
+#define PTOV(addr)	__va(addr)
+
+
+#endif	/* !__ASSEMBLY__ */
+
+/* These need to be defined for compatibility although the sun3 doesn't use them */
+#define _PAGE_NOCACHE030 0x040
+#define _CACHEMASK040   (~0x060)
+#define _PAGE_NOCACHE_S 0x040
+
+/* Page protection values within PTE. */
+#define SUN3_PAGE_VALID     (0x80000000)
+#define SUN3_PAGE_WRITEABLE (0x40000000)
+#define SUN3_PAGE_SYSTEM    (0x20000000)
+#define SUN3_PAGE_NOCACHE   (0x10000000)
+#define SUN3_PAGE_ACCESSED  (0x02000000)
+#define SUN3_PAGE_MODIFIED  (0x01000000)
+
+
+/* Externally used page protection values. */
+#define _PAGE_PRESENT	(SUN3_PAGE_VALID)
+#define _PAGE_ACCESSED	(SUN3_PAGE_ACCESSED)
+
+#define PTE_FILE_MAX_BITS 28
+
+/* Compound page protection values. */
+//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
+// is it just PAGE_KERNEL and PAGE_SHARED?
+#define PAGE_NONE	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_ACCESSED \
+				 | SUN3_PAGE_NOCACHE)
+#define PAGE_SHARED	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_WRITEABLE \
+				 | SUN3_PAGE_ACCESSED \
+				 | SUN3_PAGE_NOCACHE)
+#define PAGE_COPY	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_ACCESSED \
+				 | SUN3_PAGE_NOCACHE)
+#define PAGE_READONLY	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_ACCESSED \
+				 | SUN3_PAGE_NOCACHE)
+#define PAGE_KERNEL	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_WRITEABLE \
+				 | SUN3_PAGE_SYSTEM \
+				 | SUN3_PAGE_NOCACHE \
+				 | SUN3_PAGE_ACCESSED \
+				 | SUN3_PAGE_MODIFIED)
+#define PAGE_INIT	__pgprot(SUN3_PAGE_VALID \
+				 | SUN3_PAGE_WRITEABLE \
+				 | SUN3_PAGE_SYSTEM \
+				 | SUN3_PAGE_NOCACHE)
+
+/*
+ * Page protections for initialising protection_map. The sun3 has only two
+ * protection settings, valid (implying read and execute) and writeable. These
+ * are as close as we can get...
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/* Use these fake page-protections on PMDs. */
+#define SUN3_PMD_VALID	(0x00000001)
+#define SUN3_PMD_MASK	(0x0000003F)
+#define SUN3_PMD_MAGIC	(0x0000002B)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+#define pmd_set(pmdp,ptep) do {} while (0)
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+	pgd_val(*pgdp) = virt_to_phys(pmdp);
+}
+
+#define __pte_page(pte) \
+((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
+#define __pmd_page(pmd) \
+((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
+
+static inline int pte_none (pte_t pte) { return !pte_val (pte); }
+static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
+static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_val (*ptep) = 0;
+}
+
+#define pte_pfn(pte)            (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
+
+#define pte_page(pte)		(mem_map+((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT))
+#define pmd_page(pmd)		(mem_map+((__pmd_page(pmd) - PAGE_OFFSET) >> PAGE_SHIFT))
+
+
+static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
+#define pmd_none(pmd) pmd_none2(&(pmd))
+//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
+static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
+#define pmd_bad(pmd) pmd_bad2(&(pmd))
+static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
+/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
+static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
+
+static inline int pgd_none (pgd_t pgd) { return 0; }
+static inline int pgd_bad (pgd_t pgd) { return 0; }
+static inline int pgd_present (pgd_t pgd) { return 1; }
+static inline void pgd_clear (pgd_t *pgdp) {}
+
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not...
+ * [we have the full set here even if they don't change from m68k]
+ */
+static inline int pte_read(pte_t pte)		{ return 1; }
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
+static inline int pte_exec(pte_t pte)		{ return 1; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_rdprotect(pte_t pte)	{ return pte; }
+static inline pte_t pte_exprotect(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_mkread(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
+// use this version when caches work...
+//static inline pte_t pte_mkcache(pte_t pte)	{ pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
+// until then, use:
+static inline pte_t pte_mkcache(pte_t pte)	{ return pte; }
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
+
+/* Find an entry in a pagetable directory. */
+#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, address) \
+((mm)->pgd + pgd_index(address))
+
+/* Find an entry in a kernel pagetable directory. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level pagetable. */
+static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
+{
+	return (pmd_t *) pgd;
+}
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+	return pte.pte & SUN3_PAGE_PGNUM_MASK;
+}
+
+static inline pte_t pgoff_to_pte(inline unsigned off)
+{
+	pte_t pte = { off + SUN3_PAGE_ACCESSED };
+	return pte;
+}
+
+
+/* Find an entry in the third-level pagetable. */
+#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
+/* FIXME: should we bother with kmap() here? */
+#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address))
+#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address)
+#define pte_unmap(pte) kunmap(pte)
+#define pte_unmap_nested(pte) kunmap(pte)
+
+/* Macros to (de)construct the fake PTEs representing swap pages. */
+#define __swp_type(x)		((x).val & 0x7F)
+#define __swp_offset(x)		(((x).val) >> 7)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#endif	/* !__ASSEMBLY__ */
+#endif	/* !_SUN3_PGTABLE_H */
diff --git a/include/asm-m68k/sun3ints.h b/include/asm-m68k/sun3ints.h
new file mode 100644
index 000000000000..fd838eb14213
--- /dev/null
+++ b/include/asm-m68k/sun3ints.h
@@ -0,0 +1,49 @@
+/*
+ * sun3ints.h -- Linux/Sun3 interrupt handling code definitions
+ *
+ * Erik Verbruggen (erik@bigmama.xtdnet.nl)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef SUN3INTS_H
+#define SUN3INTS_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <asm/segment.h>
+#include <asm/intersil.h>
+#include <asm/oplib.h>
+
+#define SUN3_INT_VECS 192
+
+void sun3_enable_irq(unsigned int irq);
+void sun3_disable_irq(unsigned int irq);
+int sun3_request_irq(unsigned int irq,
+                     irqreturn_t (*handler)(int, void *, struct pt_regs *),
+                     unsigned long flags, const char *devname, void *dev_id
+		    );
+extern void sun3_init_IRQ (void);
+extern irqreturn_t (*sun3_default_handler[]) (int, void *, struct pt_regs *);
+extern irqreturn_t (*sun3_inthandler[]) (int, void *, struct pt_regs *);
+extern void sun3_free_irq (unsigned int irq, void *dev_id);
+extern void sun3_enable_interrupts (void);
+extern void sun3_disable_interrupts (void);
+extern int show_sun3_interrupts(struct seq_file *, void *);
+extern irqreturn_t sun3_process_int(int, struct pt_regs *);
+extern volatile unsigned char* sun3_intreg;
+
+/* master list of VME vectors -- don't fuck with this */
+#define SUN3_VEC_FLOPPY 0x40
+#define SUN3_VEC_VMESCSI0 0x40
+#define SUN3_VEC_VMESCSI1 0x41
+#define SUN3_VEC_CG 0xA8
+
+
+#endif /* SUN3INTS_H */
diff --git a/include/asm-m68k/sun3mmu.h b/include/asm-m68k/sun3mmu.h
new file mode 100644
index 000000000000..6c8c17d047a1
--- /dev/null
+++ b/include/asm-m68k/sun3mmu.h
@@ -0,0 +1,170 @@
+/*
+ * Definitions for Sun3 custom MMU.
+ */
+#ifndef __SUN3_MMU_H__
+#define __SUN3_MMU_H__
+
+#include <asm/movs.h>
+#include <asm/sun3-head.h>
+
+/* MMU characteristics. */
+#define SUN3_SEGMAPS_PER_CONTEXT	2048
+#define SUN3_PMEGS_NUM			256
+#define SUN3_CONTEXTS_NUM               8
+
+#define SUN3_PMEG_SIZE_BITS	 17
+#define SUN3_PMEG_SIZE		 (1 << SUN3_PMEG_SIZE_BITS)
+#define SUN3_PMEG_MASK		 (SUN3_PMEG_SIZE - 1)
+
+#define SUN3_PTE_SIZE_BITS       13
+#define SUN3_PTE_SIZE		 (1 << SUN3_PTE_SIZE_BITS)
+#define SUN3_PTE_MASK		 (SUN3_PTE_SIZE - 1)
+
+#define SUN3_CONTROL_MASK       (0x0FFFFFFC)
+#define SUN3_INVALID_PMEG	255
+#define SUN3_INVALID_CONTEXT 255
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Cleared on read, byte.            */
+#define AC_SYNC_ERR   0x60000000    /*   c fault type                        */
+#define AC_SYNC_VA    0x60000004    /*   c fault virtual address             */
+#define AC_ASYNC_ERR  0x60000008    /*   c asynchronous fault type           */
+#define AC_ASYNC_VA   0x6000000c    /*   c async fault virtual address       */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4   Not used on Sun boards, byte      */
+#define AC_VME_VECTOR 0xE0000000    /* 4   For non-Autovector VME, byte      */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \
+			    | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED)
+
+/* Bus access type within PTE. */
+#define SUN3_PAGE_TYPE_MASK   (0x0c000000)
+#define SUN3_PAGE_TYPE_MEMORY (0x00000000)
+#define SUN3_PAGE_TYPE_IO     (0x04000000)
+#define SUN3_PAGE_TYPE_VME16  (0x08000000)
+#define SUN3_PAGE_TYPE_VME32  (0x0c000000)
+
+/* Mask for page number within PTE. */
+#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF)
+
+/* Bits within bus-error register. */
+#define SUN3_BUSERR_WATCHDOG	(0x01)
+#define SUN3_BUSERR_unused	(0x02)
+#define SUN3_BUSERR_FPAENERR	(0x04)
+#define SUN3_BUSERR_FPABERR	(0x08)
+#define SUN3_BUSERR_VMEBERR	(0x10)
+#define SUN3_BUSERR_TIMEOUT	(0x20)
+#define SUN3_BUSERR_PROTERR	(0x40)
+#define SUN3_BUSERR_INVALID	(0x80)
+
+#ifndef __ASSEMBLY__
+
+/* Read bus error status register (implicitly clearing it). */
+static inline unsigned char sun3_get_buserr(void)
+{
+	unsigned char sfc, c;
+
+	GET_SFC (sfc);
+	SET_SFC (FC_CONTROL);
+	GET_CONTROL_BYTE (AC_BUS_ERROR, c);
+	SET_SFC (sfc);
+
+	return c;
+}
+
+/* Read segmap from hardware MMU. */
+static inline unsigned long sun3_get_segmap(unsigned long addr)
+{
+        register unsigned long entry;
+        unsigned char c, sfc;
+
+        GET_SFC (sfc);
+        SET_SFC (FC_CONTROL);
+        GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c);
+        SET_SFC (sfc);
+        entry = c;
+
+        return entry;
+}
+
+/* Write segmap to hardware MMU. */
+static inline void sun3_put_segmap(unsigned long addr, unsigned long entry)
+{
+        unsigned char sfc;
+
+        GET_DFC (sfc);
+        SET_DFC (FC_CONTROL);
+        SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry);
+	SET_DFC (sfc);
+
+        return;
+}
+
+/* Read PTE from hardware MMU. */
+static inline unsigned long sun3_get_pte(unsigned long addr)
+{
+        register unsigned long entry;
+        unsigned char sfc;
+
+        GET_SFC (sfc);
+        SET_SFC (FC_CONTROL);
+        GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+        SET_SFC (sfc);
+
+        return entry;
+}
+
+/* Write PTE to hardware MMU. */
+static inline void sun3_put_pte(unsigned long addr, unsigned long entry)
+{
+        unsigned char sfc;
+
+        GET_DFC (sfc);
+        SET_DFC (FC_CONTROL);
+        SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+	SET_DFC (sfc);
+
+        return;
+}
+
+/* get current context */
+static inline unsigned char sun3_get_context(void)
+{
+	unsigned char sfc, c;
+
+	GET_SFC(sfc);
+	SET_SFC(FC_CONTROL);
+	GET_CONTROL_BYTE(AC_CONTEXT, c);
+	SET_SFC(sfc);
+
+	return c;
+}
+
+/* set alternate context */
+static inline void sun3_put_context(unsigned char c)
+{
+	unsigned char dfc;
+	GET_DFC(dfc);
+	SET_DFC(FC_CONTROL);
+	SET_CONTROL_BYTE(AC_CONTEXT, c);
+	SET_DFC(dfc);
+
+	return;
+}
+
+extern void *sun3_ioremap(unsigned long phys, unsigned long size,
+			  unsigned long type);
+
+extern int sun3_map_test(unsigned long addr, char *val);
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif	/* !__SUN3_MMU_H__ */
diff --git a/include/asm-m68k/sun3x.h b/include/asm-m68k/sun3x.h
new file mode 100644
index 000000000000..f5691a1ed7cc
--- /dev/null
+++ b/include/asm-m68k/sun3x.h
@@ -0,0 +1,27 @@
+#ifndef SUN3X_H
+#define SUN3X_H
+
+/* hardware addresses */
+#define SUN3X_IOMMU       0x60000000
+#define SUN3X_ENAREG      0x61000000
+#define SUN3X_INTREG      0x61001400
+#define SUN3X_DIAGREG     0x61001800
+#define SUN3X_ZS1         0x62000000
+#define SUN3X_ZS2         0x62002000
+#define SUN3X_LANCE       0x65002000
+#define SUN3X_EEPROM      0x64000000
+#define SUN3X_IDPROM      0x640007d8
+#define SUN3X_VIDEO_BASE  0x50000000
+#define SUN3X_VIDEO_P4ID  0x50300000
+#define SUN3X_ESP_BASE	  0x66000000
+#define SUN3X_ESP_DMA	  0x66001000
+#define SUN3X_FDC         0x6e000000
+#define SUN3X_FDC_FCR     0x6e000400
+#define SUN3X_FDC_FVR     0x6e000800
+
+/* some NVRAM addresses */
+#define SUN3X_EEPROM_CONS	(SUN3X_EEPROM + 0x1f)
+#define SUN3X_EEPROM_PORTA	(SUN3X_EEPROM + 0x58)
+#define SUN3X_EEPROM_PORTB	(SUN3X_EEPROM + 0x60)
+
+#endif
diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h
new file mode 100644
index 000000000000..1ed3b787ee05
--- /dev/null
+++ b/include/asm-m68k/sun3xflop.h
@@ -0,0 +1,265 @@
+/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.
+ *
+ * Derived partially from asm-sparc/floppy.h, which is:
+ *     Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
+ */
+
+#ifndef __ASM_SUN3X_FLOPPY_H
+#define __ASM_SUN3X_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/sun3x.h>
+
+/* default interrupt vector */
+#define SUN3X_FDC_IRQ 0x40
+
+/* some constants */
+#define FCR_TC 0x1
+#define FCR_EJECT 0x2
+#define FCR_MTRON 0x4
+#define FCR_DSEL1 0x8
+#define FCR_DSEL0 0x10
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef check_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define check_region(X, Y)	(0)
+#define request_region(X, Y, Z)	(1)
+
+struct sun3xflop_private {
+	volatile unsigned char *status_r;
+	volatile unsigned char *data_r;
+	volatile unsigned char *fcr_r;
+	volatile unsigned char *fvr_r;
+	unsigned char fcr;
+} sun3x_fdc;
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun3x_82072_fd_inb(int port)
+{
+	static int once = 0;
+//	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return (*sun3x_fdc.status_r) & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return (*sun3x_fdc.data_r);
+	case 7: /* FD_DIR */
+		/* ugly hack, I can't find a way to actually detect the disk */
+		if(!once) {
+			once = 1;
+			return 0x80;
+		}
+		return 0;
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun3x_82072_fd_outb(unsigned char value, int port)
+{
+//	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Oh geese, 82072 on the Sun has no DOR register,
+		 * so we make do with taunting the FCR.
+		 *
+		 * ASSUMPTIONS:  There will only ever be one floppy
+		 *               drive attached to a Sun controller
+		 *               and it will be at drive zero.
+		 */
+
+	{
+		unsigned char fcr = sun3x_fdc.fcr;
+
+		if(value & 0x10) {
+			fcr |= (FCR_DSEL0 | FCR_MTRON);
+		} else
+			fcr &= ~(FCR_DSEL0 | FCR_MTRON);
+
+
+		if(fcr != sun3x_fdc.fcr) {
+			*(sun3x_fdc.fcr_r) = fcr;
+			sun3x_fdc.fcr = fcr;
+		}
+	}
+		break;
+	case 5: /* FD_DATA */
+		*(sun3x_fdc.data_r) = value;
+		break;
+	case 7: /* FD_DCR */
+		*(sun3x_fdc.status_r) = value;
+		break;
+	case 4: /* FD_STATUS */
+		*(sun3x_fdc.status_r) = value;
+		break;
+	};
+	return;
+}
+
+
+asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id,
+					 struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if(!doing_pdma) {
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+
+//	printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr;
+
+		for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+		    lcount; lcount--, lptr++) {
+/*			st=fd_inb(virtual_dma_port+4) & 0x80 ;  */
+			st = *(sun3x_fdc.status_r);
+/*			if(st != 0xa0)                  */
+/*				break;                  */
+
+			if((st & 0x80) == 0) {
+				virtual_dma_count = lcount;
+				virtual_dma_addr = lptr;
+				return IRQ_HANDLED;
+			}
+
+			if((st & 0x20) == 0)
+				break;
+
+			if(virtual_dma_mode)
+/*				fd_outb(*lptr, virtual_dma_port+5); */
+				*(sun3x_fdc.data_r) = *lptr;
+			else
+/*				*lptr = fd_inb(virtual_dma_port+5); */
+				*lptr = *(sun3x_fdc.data_r);
+		}
+
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+/*		st = fd_inb(virtual_dma_port+4);   */
+		st = *(sun3x_fdc.status_r);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+//	printk("st=%02x\n", st);
+	if(st == 0x20)
+		return IRQ_HANDLED;
+	if(!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+		doing_pdma = 0;
+
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+
+
+#ifdef TRACE_FLPY_INT
+	if(!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+static int sun3xflop_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, SA_INTERRUPT, "floppy", 0);
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static void __init floppy_set_flags(int *ints,int param, int param2);
+
+static int sun3xflop_init(void)
+{
+	if(FLOPPY_IRQ < 0x40)
+		FLOPPY_IRQ = SUN3X_FDC_IRQ;
+
+	sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
+	sun3x_fdc.data_r  = (volatile unsigned char *)(SUN3X_FDC+1);
+	sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
+	sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
+	sun3x_fdc.fcr = 0;
+
+	/* Last minute sanity check... */
+	if(*sun3x_fdc.status_r == 0xff) {
+		return -1;
+	}
+
+	*sun3x_fdc.fvr_r = FLOPPY_IRQ;
+
+	*sun3x_fdc.fcr_r = FCR_TC;
+	udelay(10);
+	*sun3x_fdc.fcr_r = 0;
+
+	/* Success... */
+	floppy_set_flags(0, 1, FD_BROKEN_DCL); // I don't know how to detect this.
+	allowed_drive_mask = 0x01;
+	return (int) SUN3X_FDC;
+}
+
+/* I'm not precisely sure this eject routine works */
+static int sun3x_eject(void)
+{
+	if(MACH_IS_SUN3X) {
+
+		sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
+		*(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+		udelay(10);
+		sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
+		*(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+	}
+
+	return 0;
+}
+
+#define fd_eject(drive) sun3x_eject()
+
+#endif /* !(__ASM_SUN3X_FLOPPY_H) */
diff --git a/include/asm-m68k/sun3xprom.h b/include/asm-m68k/sun3xprom.h
new file mode 100644
index 000000000000..6735efcf5f6d
--- /dev/null
+++ b/include/asm-m68k/sun3xprom.h
@@ -0,0 +1,43 @@
+/* Useful PROM locations */
+
+#ifndef SUN3X_PROM_H
+#define SUN3X_PROM_H
+
+extern void (*sun3x_putchar)(int);
+extern int (*sun3x_getchar)(void);
+extern int (*sun3x_mayget)(void);
+extern int (*sun3x_mayput)(int);
+
+void sun3x_reboot(void);
+void sun3x_abort(void);
+void sun3x_prom_init(void);
+unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size);
+
+/* interesting hardware locations */
+#define SUN3X_IOMMU       0x60000000
+#define SUN3X_ENAREG      0x61000000
+#define SUN3X_INTREG      0x61001400
+#define SUN3X_DIAGREG     0x61001800
+#define SUN3X_ZS1         0x62000000
+#define SUN3X_ZS2         0x62002000
+#define SUN3X_LANCE       0x65002000
+#define SUN3X_EEPROM      0x64000000
+#define SUN3X_IDPROM      0x640007d8
+#define SUN3X_VIDEO_BASE  0x50400000
+#define SUN3X_VIDEO_REGS  0x50300000
+
+/* vector table */
+#define SUN3X_PROM_BASE   0xfefe0000
+#define SUN3X_P_GETCHAR   (SUN3X_PROM_BASE + 20)
+#define SUN3X_P_PUTCHAR   (SUN3X_PROM_BASE + 24)
+#define SUN3X_P_MAYGET    (SUN3X_PROM_BASE + 28)
+#define SUN3X_P_MAYPUT    (SUN3X_PROM_BASE + 32)
+#define SUN3X_P_REBOOT    (SUN3X_PROM_BASE + 96)
+#define SUN3X_P_SETLEDS   (SUN3X_PROM_BASE + 144)
+#define SUN3X_P_ABORT     (SUN3X_PROM_BASE + 152)
+
+/* mapped area */
+#define SUN3X_MAP_START   0xfee00000
+#define SUN3X_MAP_END     0xff000000
+
+#endif
diff --git a/include/asm-m68k/suspend.h b/include/asm-m68k/suspend.h
new file mode 100644
index 000000000000..57b3ddb4d269
--- /dev/null
+++ b/include/asm-m68k/suspend.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_SUSPEND_H
+#define _M68K_SUSPEND_H
+
+/* Dummy include. */
+
+#endif  /* _M68K_SUSPEND_H */
diff --git a/include/asm-m68k/swim_iop.h b/include/asm-m68k/swim_iop.h
new file mode 100644
index 000000000000..f29b67876b01
--- /dev/null
+++ b/include/asm-m68k/swim_iop.h
@@ -0,0 +1,221 @@
+/*
+ * SWIM access through the IOP
+ * Written by Joshua M. Thompson
+ */
+
+/* IOP number and channel number for the SWIM */
+
+#define SWIM_IOP	IOP_NUM_ISM
+#define SWIM_CHAN	1
+
+/* Command code: */
+
+#define CMD_INIT		0x01	/* Initialize                  */
+#define CMD_SHUTDOWN		0x02	/* Shutdown                    */
+#define CMD_START_POLL		0x03	/* Start insert/eject polling  */
+#define CMD_STOP_POLL		0x04	/* Stop insert/eject polling   */
+#define CMD_SETHFSTAG		0x05	/* Set HFS tag buffer address  */
+#define CMD_STATUS		0x06	/* Status                      */
+#define CMD_EJECT		0x07	/* Eject                       */
+#define CMD_FORMAT		0x08	/* Format                      */
+#define CMD_FORMAT_VERIFY	0x09	/* Format and Verify           */
+#define CMD_WRITE		0x0A	/* Write                       */
+#define CMD_READ		0x0B	/* Read                        */
+#define CMD_READ_VERIFY		0x0C	/* Read and Verify             */
+#define CMD_CACHE_CTRL		0x0D	/* Cache control               */
+#define CMD_TAGBUFF_CTRL	0x0E	/* Tag buffer control          */
+#define CMD_GET_ICON		0x0F	/* Get Icon                    */
+
+/* Drive types: */
+
+/* note: apple sez DRV_FDHD is 4, but I get back a type */
+/*       of 5 when I do a drive status check on my FDHD */
+
+#define	DRV_NONE	0	/* No drive             */
+#define	DRV_UNKNOWN	1	/* Unspecified drive    */
+#define	DRV_400K	2	/* 400K                 */
+#define	DRV_800K	3	/* 400K/800K            */
+#define	DRV_FDHD	5	/* 400K/800K/720K/1440K */
+#define	DRV_HD20	7	/* Apple HD20           */
+
+/* Format types: */
+
+#define	FMT_HD20	0x0001	/*  Apple HD20 */
+#define	FMT_400K	0x0002	/*  400K (GCR) */
+#define	FMT_800K	0x0004	/*  800K (GCR) */
+#define	FMT_720K	0x0008	/*  720K (MFM) */
+#define	FMT_1440K	0x0010	/* 1.44M (MFM) */
+
+#define	FMD_KIND_400K	1
+#define	FMD_KIND_800K	2
+#define	FMD_KIND_720K	3
+#define	FMD_KIND_1440K	1
+
+/* Icon Flags: */
+
+#define	ICON_MEDIA	0x01	/* Have IOP supply media icon */
+#define	ICON_DRIVE	0x01	/* Have IOP supply drive icon */
+
+/* Error codes: */
+
+#define	gcrOnMFMErr	-400	/* GCR (400/800K) on HD media */
+#define	verErr		-84	/* verify failed */
+#define	fmt2Err		-83	/* can't get enough sync during format */
+#define	fmt1Err		-82	/* can't find sector 0 after track format */
+#define	sectNFErr	-81	/* can't find sector */
+#define	seekErr		-80	/* drive error during seek */
+#define	spdAdjErr	-79	/* can't set drive speed */
+#define	twoSideErr	-78	/* drive is single-sided */
+#define	initIWMErr	-77	/* error during initialization */
+#define	tk0badErr	-76	/* track zero is bad */
+#define	cantStepErr	-75	/* drive error during step */
+#define	wrUnderrun	-74	/* write underrun occurred */
+#define	badDBtSlp	-73	/* bad data bitslip marks */
+#define	badDCksum	-72	/* bad data checksum */
+#define	noDtaMkErr	-71	/* can't find data mark */
+#define	badBtSlpErr	-70	/* bad address bitslip marks */
+#define	badCksmErr	-69	/* bad address-mark checksum */
+#define	dataVerErr	-68	/* read-verify failed */
+#define	noAdrMkErr	-67	/* can't find an address mark */
+#define	noNybErr	-66	/* no nybbles? disk is probably degaussed */
+#define	offLinErr	-65	/* no disk in drive */
+#define	noDriveErr	-64	/* drive isn't connected */
+#define	nsDrvErr	-56	/* no such drive */
+#define	paramErr	-50	/* bad positioning information */
+#define	wPrErr		-44	/* write protected */
+#define	openErr		-23	/* already initialized */
+
+#ifndef __ASSEMBLY__
+
+struct swim_drvstatus {
+	__u16	curr_track;	/* Current track number                   */
+	__u8	write_prot;	/* 0x80 if disk is write protected        */
+	__u8	disk_in_drive;	/* 0x01 or 0x02 if a disk is in the drive */
+	__u8	installed;	/* 0x01 if drive installed, 0xFF if not   */
+	__u8	num_sides;	/* 0x80 if two-sided format supported     */
+	__u8	two_sided;	/* 0xff if two-sided format diskette      */
+	__u8	new_interface;	/* 0x00 if old 400K drive, 0xFF if newer  */
+	__u16	errors;		/* Disk error count                       */
+	struct {		/* 32 bits */
+		__u16	reserved;
+		__u16	:4;
+		__u16	external:1;	/* Drive is external        */
+		__u16	scsi:1;		/* Drive is a SCSI drive    */
+		__u16	fixed:1;	/* Drive has fixed media    */
+		__u16	secondary:1;	/* Drive is secondary drive */
+		__u8	type;		/* Drive type               */
+	} info;
+	__u8	mfm_drive;	/* 0xFF if this is an FDHD drive    */
+	__u8	mfm_disk;	/* 0xFF if 720K/1440K (MFM) disk    */
+	__u8	mfm_format;	/* 0x00 if 720K, 0xFF if 1440K      */
+	__u8	ctlr_type;	/* 0x00 if IWM, 0xFF if SWIM        */
+	__u16	curr_format;	/* Current format type              */
+	__u16	allowed_fmt;	/* Allowed format types             */
+	__u32	num_blocks;	/* Number of blocks on disk         */
+	__u8	icon_flags;	/* Icon flags                       */
+	__u8	unusued;
+};
+
+/* Commands issued from the host to the IOP: */
+
+struct swimcmd_init {
+	__u8	code;		/* CMD_INIT */
+	__u8	unusued;
+	__u16	error;
+	__u8	drives[28];	/* drive type list */
+};
+
+struct swimcmd_startpoll {
+	__u8	code;		/* CMD_START_POLL */
+	__u8	unusued;
+	__u16	error;
+};
+
+struct swimcmd_sethfstag {
+	__u8	code;		/* CMD_SETHFSTAG */
+	__u8	unusued;
+	__u16	error;
+	caddr_t	tagbuf;		/* HFS tag buffer address */
+};
+
+struct swimcmd_status {
+	__u8	code;		/* CMD_STATUS */
+	__u8	drive_num;
+	__u16	error;
+	struct swim_drvstatus status;
+};
+
+struct swimcmd_eject {
+	__u8	code;		/* CMD_EJECT */
+	__u8	drive_num;
+	__u16	error;
+	struct swim_drvstatus status;
+};
+
+struct swimcmd_format {
+	__u8	code;		/* CMD_FORMAT */
+	__u8	drive_num;
+	__u16	error;
+	union {
+		struct {
+			__u16 fmt;	   /* format kind                  */
+			__u8  hdrbyte;	   /* fmt byte for hdr (0=default) */
+			__u8  interleave;  /* interleave (0 = default)     */
+			caddr_t	databuf;   /* sector data buff (0=default  */
+			caddr_t	tagbuf;	   /* tag data buffer (0=default)  */
+		} f;
+		struct swim_drvstatus status;
+	} p;
+};
+
+struct swimcmd_fmtverify {
+	__u8	code;		/* CMD_FORMAT_VERIFY */
+	__u8	drive_num;
+	__u16	error;
+};
+
+struct swimcmd_rw {
+	__u8	code;		/* CMD_READ, CMD_WRITE or CMD_READ_VERIFY */
+	__u8	drive_num;
+	__u16	error;
+	caddr_t	buffer;		/* R/W buffer address */
+	__u32	first_block;	/* Starting block     */
+	__u32	num_blocks;	/* Number of blocks   */
+	__u8	tag[12];	/* tag data           */
+};
+
+struct swimcmd_cachectl {
+	__u8	code;		/* CMD_CACHE_CTRL */
+	__u8	unused;
+	__u16	error;
+	__u8	enable;		/* Nonzero to enable cache                */
+	__u8	install;	/* +1 = install, -1 = remove, 0 = neither */
+};
+
+struct swimcmd_tagbufctl {
+	__u8	code;		/* CMD_TAGBUFF_CTRL */
+	__u8	unused;
+	__u16	error;
+	caddr_t	buf;		/* buffer address or 0 to disable */
+};
+
+struct swimcmd_geticon {
+	__u8	code;		/* CMD_GET_ICON */
+	__u8	drive_num;
+	__u16	error;
+	caddr_t	buffer;		/* Nuffer address */
+	__u16	kind;		/* 0 = media icon, 1 = drive icon */
+	__u16	unused;
+	__u16	max_bytes;	/* maximum  byte count */
+};
+
+/* Messages from the SWIM IOP to the host CPU: */
+
+struct swimmsg_status {
+	__u8	code;		/* 1 = insert, 2 = eject, 3 = status changed */
+	__u8	drive_num;
+	__u16	error;
+	struct swim_drvstatus status;
+};
+
+#endif /* __ASSEMBLY__ */
diff --git a/include/asm-m68k/system.h b/include/asm-m68k/system.h
new file mode 100644
index 000000000000..64d3481df74c
--- /dev/null
+++ b/include/asm-m68k/system.h
@@ -0,0 +1,201 @@
+#ifndef _M68K_SYSTEM_H
+#define _M68K_SYSTEM_H
+
+#include <linux/config.h> /* get configuration macros */
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) do { \
+  register void *_prev __asm__ ("a0") = (prev); \
+  register void *_next __asm__ ("a1") = (next); \
+  register void *_last __asm__ ("d1"); \
+  __asm__ __volatile__("jbsr resume" \
+		       : "=a" (_prev), "=a" (_next), "=d" (_last) \
+		       : "0" (_prev), "1" (_next) \
+		       : "d0", "d2", "d3", "d4", "d5"); \
+  (last) = _last; \
+} while (0)
+
+
+/* interrupt control.. */
+#if 0
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#else
+#include <linux/hardirq.h>
+#define local_irq_enable() ({							\
+	if (MACH_IS_Q40 || !hardirq_count())					\
+		asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory");	\
+})
+#endif
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+static inline int irqs_disabled(void)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	return flags & ~ALLOWINT;
+}
+
+/* For spinlocks etc */
+#define local_irq_save(x)	({ local_save_flags(x); local_irq_disable(); })
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()		do { asm volatile ("nop"); barrier(); } while (0)
+#define mb()		barrier()
+#define rmb()		barrier()
+#define wmb()		barrier()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(var, value)    do { xchg(&var, value); } while (0)
+#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
+
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	unsigned long flags, tmp;
+
+	local_irq_save(flags);
+
+	switch (size) {
+	case 1:
+		tmp = *(u8 *)ptr;
+		*(u8 *)ptr = x;
+		x = tmp;
+		break;
+	case 2:
+		tmp = *(u16 *)ptr;
+		*(u16 *)ptr = x;
+		x = tmp;
+		break;
+	case 4:
+		tmp = *(u32 *)ptr;
+		*(u32 *)ptr = x;
+		x = tmp;
+		break;
+	default:
+		BUG();
+	}
+
+	local_irq_restore(flags);
+	return x;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	    case 1:
+		__asm__ __volatile__
+			("moveb %2,%0\n\t"
+			 "1:\n\t"
+			 "casb %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 2:
+		__asm__ __volatile__
+			("movew %2,%0\n\t"
+			 "1:\n\t"
+			 "casw %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 4:
+		__asm__ __volatile__
+			("movel %2,%0\n\t"
+			 "1:\n\t"
+			 "casl %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	return x;
+}
+#endif
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#ifdef CONFIG_RMW_INSNS
+#define __HAVE_ARCH_CMPXCHG	1
+
+static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 1:
+		__asm__ __volatile__ ("casb %0,%2,%1"
+				      : "=d" (old), "=m" (*(char *)p)
+				      : "d" (new), "0" (old), "m" (*(char *)p));
+		break;
+	case 2:
+		__asm__ __volatile__ ("casw %0,%2,%1"
+				      : "=d" (old), "=m" (*(short *)p)
+				      : "d" (new), "0" (old), "m" (*(short *)p));
+		break;
+	case 4:
+		__asm__ __volatile__ ("casl %0,%2,%1"
+				      : "=d" (old), "=m" (*(int *)p)
+				      : "d" (new), "0" (old), "m" (*(int *)p));
+		break;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+					(unsigned long)(n),sizeof(*(ptr))))
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SYSTEM_H */
diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h
new file mode 100644
index 000000000000..e9eec3eb0718
--- /dev/null
+++ b/include/asm-m68k/termbits.h
@@ -0,0 +1,175 @@
+#ifndef __ARCH_M68K_TERMBITS_H__
+#define __ARCH_M68K_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ARCH_M68K_TERMBITS_H__ */
diff --git a/include/asm-m68k/termios.h b/include/asm-m68k/termios.h
new file mode 100644
index 000000000000..857f0c9a9120
--- /dev/null
+++ b/include/asm-m68k/termios.h
@@ -0,0 +1,108 @@
+#ifndef _M68K_TERMIOS_H
+#define _M68K_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif /* _M68K_TERMIOS_H */
diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h
new file mode 100644
index 000000000000..5f58939c59db
--- /dev/null
+++ b/include/asm-m68k/thread_info.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_M68K_THREAD_INFO_H
+#define _ASM_M68K_THREAD_INFO_H
+
+#include <asm/types.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+	__u32 cpu; /* should always be 0 on m68k */
+	struct restart_block    restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
+#if PAGE_SHIFT == 13 /* 8k machines */
+#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,0))
+#define free_thread_info(ti)  free_pages((unsigned long)(ti),0)
+#else /* otherwise assume 4k pages */
+#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,1))
+#define free_thread_info(ti)  free_pages((unsigned long)(ti),1)
+#endif /* PAGE_SHIFT == 13 */
+
+//#define init_thread_info	(init_task.thread.info)
+#define init_stack		(init_thread_union.stack)
+
+#define current_thread_info()	(current->thread_info)
+
+
+#define __HAVE_THREAD_FUNCTIONS
+
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_DELAYED_TRACE	1	/* single step a syscall */
+#define TIF_NOTIFY_RESUME	2	/* resumption notification requested */
+#define TIF_SIGPENDING		3	/* signal pending */
+#define TIF_NEED_RESCHED	4	/* rescheduling necessary */
+#define TIF_MEMDIE		5
+
+extern int thread_flag_fixme(void);
+
+/*
+ * flag set/clear/test wrappers
+ * - pass TIF_xxxx constants to these functions
+ */
+
+#define __set_tsk_thread_flag(tsk, flag, val) ({	\
+	switch (flag) {					\
+	case TIF_SIGPENDING:				\
+		tsk->thread.work.sigpending = val;	\
+		break;					\
+	case TIF_NEED_RESCHED:				\
+		tsk->thread.work.need_resched = val;	\
+		break;					\
+	case TIF_SYSCALL_TRACE:				\
+		tsk->thread.work.syscall_trace = val;	\
+		break;					\
+	case TIF_MEMDIE:				\
+		tsk->thread.work.memdie = val;		\
+		break;					\
+	default:					\
+		thread_flag_fixme();			\
+	}						\
+})
+
+#define __get_tsk_thread_flag(tsk, flag) ({		\
+	int ___res;					\
+	switch (flag) {					\
+	case TIF_SIGPENDING:				\
+		___res = tsk->thread.work.sigpending;	\
+		break;					\
+	case TIF_NEED_RESCHED:				\
+		___res = tsk->thread.work.need_resched;	\
+		break;					\
+	case TIF_SYSCALL_TRACE:				\
+		___res = tsk->thread.work.syscall_trace;\
+		break;					\
+	case TIF_MEMDIE:				\
+		___res = tsk->thread.work.memdie;\
+		break;					\
+	default:					\
+		___res = thread_flag_fixme();		\
+	}						\
+	___res;						\
+})
+
+#define __get_set_tsk_thread_flag(tsk, flag, val) ({	\
+	int __res = __get_tsk_thread_flag(tsk, flag);	\
+	__set_tsk_thread_flag(tsk, flag, val);		\
+	__res;						\
+})
+
+#define set_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, ~0)
+#define clear_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, 0)
+#define test_and_set_tsk_thread_flag(tsk, flag) __get_set_tsk_thread_flag(tsk, flag, ~0)
+#define test_tsk_thread_flag(tsk, flag) __get_tsk_thread_flag(tsk, flag)
+
+#define set_thread_flag(flag) set_tsk_thread_flag(current, flag)
+#define clear_thread_flag(flag) clear_tsk_thread_flag(current, flag)
+#define test_thread_flag(flag) test_tsk_thread_flag(current, flag)
+
+#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED)
+#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED)
+
+#endif	/* _ASM_M68K_THREAD_INFO_H */
diff --git a/include/asm-m68k/timex.h b/include/asm-m68k/timex.h
new file mode 100644
index 000000000000..b87f2f278f67
--- /dev/null
+++ b/include/asm-m68k/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-m68k/timex.h
+ *
+ * m68k architecture timex specifications
+ */
+#ifndef _ASMm68k_TIMEX_H
+#define _ASMm68k_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/include/asm-m68k/tlb.h b/include/asm-m68k/tlb.h
new file mode 100644
index 000000000000..1785cff73449
--- /dev/null
+++ b/include/asm-m68k/tlb.h
@@ -0,0 +1,20 @@
+#ifndef _M68K_TLB_H
+#define _M68K_TLB_H
+
+/*
+ * m68k doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _M68K_TLB_H */
diff --git a/include/asm-m68k/tlbflush.h b/include/asm-m68k/tlbflush.h
new file mode 100644
index 000000000000..8e61ccffe13a
--- /dev/null
+++ b/include/asm-m68k/tlbflush.h
@@ -0,0 +1,230 @@
+#ifndef _M68K_TLBFLUSH_H
+#define _M68K_TLBFLUSH_H
+
+#include <linux/config.h>
+
+#ifndef CONFIG_SUN3
+
+#include <asm/current.h>
+
+static inline void flush_tlb_kernel_page(void *addr)
+{
+	if (CPU_IS_040_OR_060) {
+		mm_segment_t old_fs = get_fs();
+		set_fs(KERNEL_DS);
+		__asm__ __volatile__(".chip 68040\n\t"
+				     "pflush (%0)\n\t"
+				     ".chip 68k"
+				     : : "a" (addr));
+		set_fs(old_fs);
+	} else
+		__asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
+}
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	if (CPU_IS_040_OR_060)
+		__asm__ __volatile__(".chip 68040\n\t"
+				     "pflushan\n\t"
+				     ".chip 68k");
+	else
+		__asm__ __volatile__("pflush #0,#4");
+}
+
+static inline void __flush_tlb040_one(unsigned long addr)
+{
+	__asm__ __volatile__(".chip 68040\n\t"
+			     "pflush (%0)\n\t"
+			     ".chip 68k"
+			     : : "a" (addr));
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	if (CPU_IS_040_OR_060)
+		__flush_tlb040_one(addr);
+	else
+		__asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	if (CPU_IS_040_OR_060)
+		__asm__ __volatile__(".chip 68040\n\t"
+				     "pflusha\n\t"
+				     ".chip 68k");
+	else
+		__asm__ __volatile__("pflusha");
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	if (vma->vm_mm == current->active_mm) {
+		mm_segment_t old_fs = get_fs();
+		set_fs(USER_DS);
+		__flush_tlb_one(addr);
+		set_fs(old_fs);
+	}
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	flush_tlb_all();
+}
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+}
+
+#else
+
+
+/* Reserved PMEGs. */
+extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
+extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM];
+
+/* Flush all userspace mappings one by one...  (why no flush command,
+   sun?) */
+static inline void flush_tlb_all(void)
+{
+       unsigned long addr;
+       unsigned char ctx, oldctx;
+
+       oldctx = sun3_get_context();
+       for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) {
+	       for(ctx = 0; ctx < 8; ctx++) {
+		       sun3_put_context(ctx);
+		       sun3_put_segmap(addr, SUN3_INVALID_PMEG);
+	       }
+       }
+
+       sun3_put_context(oldctx);
+       /* erase all of the userspace pmeg maps, we've clobbered them
+	  all anyway */
+       for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) {
+	       if(pmeg_alloc[addr] == 1) {
+		       pmeg_alloc[addr] = 0;
+		       pmeg_ctx[addr] = 0;
+		       pmeg_vaddr[addr] = 0;
+	       }
+       }
+
+}
+
+/* Clear user TLB entries within the context named in mm */
+static inline void flush_tlb_mm (struct mm_struct *mm)
+{
+     unsigned char oldctx;
+     unsigned char seg;
+     unsigned long i;
+
+     oldctx = sun3_get_context();
+     sun3_put_context(mm->context);
+
+     for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) {
+	     seg = sun3_get_segmap(i);
+	     if(seg == SUN3_INVALID_PMEG)
+		     continue;
+
+	     sun3_put_segmap(i, SUN3_INVALID_PMEG);
+	     pmeg_alloc[seg] = 0;
+	     pmeg_ctx[seg] = 0;
+	     pmeg_vaddr[seg] = 0;
+     }
+
+     sun3_put_context(oldctx);
+
+}
+
+/* Flush a single TLB page. In this case, we're limited to flushing a
+   single PMEG */
+static inline void flush_tlb_page (struct vm_area_struct *vma,
+				   unsigned long addr)
+{
+	unsigned char oldctx;
+	unsigned char i;
+
+	oldctx = sun3_get_context();
+	sun3_put_context(vma->vm_mm->context);
+	addr &= ~SUN3_PMEG_MASK;
+	if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG)
+	{
+		pmeg_alloc[i] = 0;
+		pmeg_ctx[i] = 0;
+		pmeg_vaddr[i] = 0;
+		sun3_put_segmap (addr,  SUN3_INVALID_PMEG);
+	}
+	sun3_put_context(oldctx);
+
+}
+/* Flush a range of pages from TLB. */
+
+static inline void flush_tlb_range (struct vm_area_struct *vma,
+		      unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned char seg, oldctx;
+
+	start &= ~SUN3_PMEG_MASK;
+
+	oldctx = sun3_get_context();
+	sun3_put_context(mm->context);
+
+	while(start < end)
+	{
+		if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG)
+		     goto next;
+		if(pmeg_ctx[seg] == mm->context) {
+			pmeg_alloc[seg] = 0;
+			pmeg_ctx[seg] = 0;
+			pmeg_vaddr[seg] = 0;
+		}
+		sun3_put_segmap(start, SUN3_INVALID_PMEG);
+	next:
+		start += SUN3_PMEG_SIZE;
+	}
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	flush_tlb_all();
+}
+
+/* Flush kernel page from TLB. */
+static inline void flush_tlb_kernel_page (unsigned long addr)
+{
+	sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
+}
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+}
+
+#endif
+
+#endif /* _M68K_TLBFLUSH_H */
diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h
new file mode 100644
index 000000000000..ca173e9f26ff
--- /dev/null
+++ b/include/asm-m68k/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/asm-m68k/traps.h b/include/asm-m68k/traps.h
new file mode 100644
index 000000000000..475056191252
--- /dev/null
+++ b/include/asm-m68k/traps.h
@@ -0,0 +1,265 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68K_TRAPS_H
+#define _M68K_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+
+#endif
+
+#define VEC_RESETSP (0)
+#define VEC_RESETPC (1)
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV12  (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_RESV16  (16)
+#define VEC_RESV17  (17)
+#define VEC_RESV18  (18)
+#define VEC_RESV19  (19)
+#define VEC_RESV20  (20)
+#define VEC_RESV21  (21)
+#define VEC_RESV22  (22)
+#define VEC_RESV23  (23)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define VEC_MMUCFG  (56)
+#define VEC_MMUILL  (57)
+#define VEC_MMUACC  (58)
+#define VEC_RESV59  (59)
+#define	VEC_UNIMPEA (60)
+#define	VEC_UNIMPII (61)
+#define VEC_RESV62  (62)
+#define VEC_RESV63  (63)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* bits for 68020/68030 special status word */
+
+#define FC    (0x8000)
+#define FB    (0x4000)
+#define RC    (0x2000)
+#define RB    (0x1000)
+#define DF    (0x0100)
+#define RM    (0x0080)
+#define RW    (0x0040)
+#define SZ    (0x0030)
+#define DFC   (0x0007)
+
+/* bits for 68030 MMU status register (mmusr,psr) */
+
+#define MMU_B	     (0x8000)    /* bus error */
+#define MMU_L	     (0x4000)    /* limit violation */
+#define MMU_S	     (0x2000)    /* supervisor violation */
+#define MMU_WP	     (0x0800)    /* write-protected */
+#define MMU_I	     (0x0400)    /* invalid descriptor */
+#define MMU_M	     (0x0200)    /* ATC entry modified */
+#define MMU_T	     (0x0040)    /* transparent translation */
+#define MMU_NUM      (0x0007)    /* number of levels traversed */
+
+
+/* bits for 68040 special status word */
+#define CP_040	(0x8000)
+#define CU_040	(0x4000)
+#define CT_040	(0x2000)
+#define CM_040	(0x1000)
+#define MA_040	(0x0800)
+#define ATC_040 (0x0400)
+#define LK_040	(0x0200)
+#define RW_040	(0x0100)
+#define SIZ_040 (0x0060)
+#define TT_040	(0x0018)
+#define TM_040	(0x0007)
+
+/* bits for 68040 write back status word */
+#define WBV_040   (0x80)
+#define WBSIZ_040 (0x60)
+#define WBBYT_040 (0x20)
+#define WBWRD_040 (0x40)
+#define WBLNG_040 (0x00)
+#define WBTT_040  (0x18)
+#define WBTM_040  (0x07)
+
+/* bus access size codes */
+#define BA_SIZE_BYTE    (0x20)
+#define BA_SIZE_WORD    (0x40)
+#define BA_SIZE_LONG    (0x00)
+#define BA_SIZE_LINE    (0x60)
+
+/* bus access transfer type codes */
+#define BA_TT_MOVE16    (0x08)
+
+/* bits for 68040 MMU status register (mmusr) */
+#define MMU_B_040   (0x0800)
+#define MMU_G_040   (0x0400)
+#define MMU_S_040   (0x0080)
+#define MMU_CM_040  (0x0060)
+#define MMU_M_040   (0x0010)
+#define MMU_WP_040  (0x0004)
+#define MMU_T_040   (0x0002)
+#define MMU_R_040   (0x0001)
+
+/* bits in the 68060 fault status long word (FSLW) */
+#define	MMU060_MA	(0x08000000)	/* misaligned */
+#define	MMU060_LK	(0x02000000)	/* locked transfer */
+#define	MMU060_RW	(0x01800000)	/* read/write */
+# define MMU060_RW_W	(0x00800000)	/* write */
+# define MMU060_RW_R	(0x01000000)	/* read */
+# define MMU060_RW_RMW	(0x01800000)	/* read/modify/write */
+# define MMU060_W	(0x00800000)	/* general write, includes rmw */
+#define	MMU060_SIZ	(0x00600000)	/* transfer size */
+#define	MMU060_TT	(0x00180000)	/* transfer type (TT) bits */
+#define	MMU060_TM	(0x00070000)	/* transfer modifier (TM) bits */
+#define	MMU060_IO	(0x00008000)	/* instruction or operand */
+#define	MMU060_PBE	(0x00004000)	/* push buffer bus error */
+#define	MMU060_SBE	(0x00002000)	/* store buffer bus error */
+#define	MMU060_PTA	(0x00001000)	/* pointer A fault */
+#define	MMU060_PTB	(0x00000800)	/* pointer B fault */
+#define	MMU060_IL	(0x00000400)	/* double indirect descr fault */
+#define	MMU060_PF	(0x00000200)	/* page fault (invalid descr) */
+#define	MMU060_SP	(0x00000100)	/* supervisor protection */
+#define	MMU060_WP	(0x00000080)	/* write protection */
+#define	MMU060_TWE	(0x00000040)	/* bus error on table search */
+#define	MMU060_RE	(0x00000020)	/* bus error on read */
+#define	MMU060_WE	(0x00000010)	/* bus error on write */
+#define	MMU060_TTR	(0x00000008)	/* error caused by TTR translation */
+#define	MMU060_BPE	(0x00000004)	/* branch prediction error */
+#define	MMU060_SEE	(0x00000001)	/* software emulated error */
+
+/* cases of missing or invalid descriptors */
+#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \
+			 MMU060_IL  | MMU060_PF)
+/* bits that indicate real errors */
+#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \
+			 MMU060_WP  | MMU060_TWE | MMU060_RE       | MMU060_WE)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+	    } fmt2;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+	    } fmt3;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned long  pc;	     /* pc of faulted instr */
+	    } fmt4;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned short ssw;      /* special status word */
+		    unsigned short wb3s;     /* write back 3 status */
+		    unsigned short wb2s;     /* write back 2 status */
+		    unsigned short wb1s;     /* write back 1 status */
+		    unsigned long  faddr;    /* fault address */
+		    unsigned long  wb3a;     /* write back 3 address */
+		    unsigned long  wb3d;     /* write back 3 data */
+		    unsigned long  wb2a;     /* write back 2 address */
+		    unsigned long  wb2d;     /* write back 2 data */
+		    unsigned long  wb1a;     /* write back 1 address */
+		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+		    unsigned long  pd1;      /* push data 1*/
+		    unsigned long  pd2;      /* push data 2*/
+		    unsigned long  pd3;      /* push data 3*/
+	    } fmt7;
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+		    unsigned short int1[4];  /* internal registers */
+	    } fmt9;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;      /* special status word */
+		    unsigned short isc;      /* instruction stage c */
+		    unsigned short isb;      /* instruction stage b */
+		    unsigned long  daddr;    /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;    /* data cycle output buffer */
+		    unsigned short int3[2];
+	    } fmta;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;     /* special status word */
+		    unsigned short isc;     /* instruction stage c */
+		    unsigned short isb;     /* instruction stage b */
+		    unsigned long  daddr;   /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;   /* data cycle output buffer */
+		    unsigned short int3[4];
+		    unsigned long  baddr;   /* stage B address */
+		    unsigned short int4[2];
+		    unsigned long  dibuf;   /* data cycle input buffer */
+		    unsigned short int5[3];
+		    unsigned	   ver : 4; /* stack frame version # */
+		    unsigned	   int6:12;
+		    unsigned short int7[18];
+	    } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_TRAPS_H */
diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h
new file mode 100644
index 000000000000..f391cbe39b96
--- /dev/null
+++ b/include/asm-m68k/types.h
@@ -0,0 +1,69 @@
+#ifndef _M68K_TYPES_H
+#define _M68K_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* DMA addresses are always 32-bits wide */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_TYPES_H */
diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h
new file mode 100644
index 000000000000..605e6cb811f8
--- /dev/null
+++ b/include/asm-m68k/uaccess.h
@@ -0,0 +1,893 @@
+#ifndef __M68K_UACCESS_H
+#define __M68K_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/* We let the MMU do all checking */
+#define access_ok(type,addr,size) 1
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void *addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
+	break;						\
+    case 2:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
+	break;						\
+    case 4:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
+	break;						\
+    case 8:                                             \
+       __pu_err = __constant_copy_to_user(ptr, &__pu_val, 8);        \
+       break;                                           \
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(err,x,ptr,bwl)			\
+__asm__ __volatile__					\
+    ("21:moves" #bwl " %2,%1\n"				\
+     "1:\n"						\
+     ".section .fixup,\"ax\"\n"				\
+     "   .even\n"					\
+     "2: movel %3,%0\n"					\
+     "   jra 1b\n"					\
+     ".previous\n"					\
+     ".section __ex_table,\"a\"\n"			\
+     "   .align 4\n"					\
+     "   .long 21b,2b\n"				\
+     "   .long 1b,2b\n"					\
+     ".previous"					\
+     : "=d"(err)					\
+     : "m"(*(ptr)), "r"(x), "i"(-EFAULT), "0"(0))
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err;						\
+    typeof(*(ptr)) __gu_val;					\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
+	break;							\
+    case 2:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
+	break;							\
+    case 4:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
+	break;							\
+    case 8:                                                     \
+        __gu_err = __constant_copy_from_user(&__gu_val, ptr, 8);  \
+        break;                                                  \
+    default:							\
+	__gu_val = 0;						\
+	__gu_err = __get_user_bad();				\
+	break;							\
+    }								\
+    (x) = __gu_val;						\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg)	\
+__asm__ __volatile__				\
+    ("1: moves" #bwl " %2,%1\n"			\
+     "2:\n"					\
+     ".section .fixup,\"ax\"\n"			\
+     "   .even\n"				\
+     "3: movel %3,%0\n"				\
+     "   sub" #bwl " %1,%1\n"			\
+     "   jra 2b\n"				\
+     ".previous\n"				\
+     ".section __ex_table,\"a\"\n"		\
+     "   .align 4\n"				\
+     "   .long 1b,3b\n"				\
+     ".previous"				\
+     : "=d"(err), reg(x)			\
+     : "m"(*(ptr)), "i" (-EFAULT), "0"(0))
+
+static inline unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+    unsigned long tmp;
+    __asm__ __volatile__
+	("   tstl %2\n"
+	 "   jeq 2f\n"
+	 "1: movesl (%1)+,%3\n"
+	 "   movel %3,(%0)+\n"
+	 "   subql #1,%2\n"
+	 "   jne 1b\n"
+	 "2: movel %4,%2\n"
+	 "   bclr #1,%2\n"
+	 "   jeq 4f\n"
+	 "3: movesw (%1)+,%3\n"
+	 "   movew %3,(%0)+\n"
+	 "4: bclr #0,%2\n"
+	 "   jeq 6f\n"
+	 "5: movesb (%1)+,%3\n"
+	 "   moveb %3,(%0)+\n"
+	 "6:\n"
+	 ".section .fixup,\"ax\"\n"
+	 "   .even\n"
+	 "7: movel %2,%%d0\n"
+	 "71:clrl (%0)+\n"
+	 "   subql #1,%%d0\n"
+	 "   jne 71b\n"
+	 "   lsll #2,%2\n"
+	 "   addl %4,%2\n"
+	 "   btst #1,%4\n"
+	 "   jne 81f\n"
+	 "   btst #0,%4\n"
+	 "   jne 91f\n"
+	 "   jra 6b\n"
+	 "8: addql #2,%2\n"
+	 "81:clrw (%0)+\n"
+	 "   btst #0,%4\n"
+	 "   jne 91f\n"
+	 "   jra 6b\n"
+	 "9: addql #1,%2\n"
+	 "91:clrb (%0)+\n"
+	 "   jra 6b\n"
+         ".previous\n"
+	 ".section __ex_table,\"a\"\n"
+	 "   .align 4\n"
+	 "   .long 1b,7b\n"
+	 "   .long 3b,8b\n"
+	 "   .long 5b,9b\n"
+	 ".previous"
+	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
+	 : "d"(n & 3), "0"(to), "1"(from), "2"(n/4)
+	 : "d0", "memory");
+    return n;
+}
+
+static inline unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+    unsigned long tmp;
+    __asm__ __volatile__
+	("   tstl %2\n"
+	 "   jeq 3f\n"
+	 "1: movel (%1)+,%3\n"
+	 "22:movesl %3,(%0)+\n"
+	 "2: subql #1,%2\n"
+	 "   jne 1b\n"
+	 "3: movel %4,%2\n"
+	 "   bclr #1,%2\n"
+	 "   jeq 4f\n"
+	 "   movew (%1)+,%3\n"
+	 "24:movesw %3,(%0)+\n"
+	 "4: bclr #0,%2\n"
+	 "   jeq 5f\n"
+	 "   moveb (%1)+,%3\n"
+	 "25:movesb %3,(%0)+\n"
+	 "5:\n"
+	 ".section .fixup,\"ax\"\n"
+	 "   .even\n"
+	 "60:addql #1,%2\n"
+	 "6: lsll #2,%2\n"
+	 "   addl %4,%2\n"
+	 "   jra 5b\n"
+	 "7: addql #2,%2\n"
+	 "   jra 5b\n"
+	 "8: addql #1,%2\n"
+	 "   jra 5b\n"
+	 ".previous\n"
+	 ".section __ex_table,\"a\"\n"
+	 "   .align 4\n"
+	 "   .long 1b,60b\n"
+	 "   .long 22b,6b\n"
+	 "   .long 2b,6b\n"
+	 "   .long 24b,7b\n"
+	 "   .long 3b,60b\n"
+	 "   .long 4b,7b\n"
+	 "   .long 25b,8b\n"
+	 "   .long 5b,8b\n"
+	 ".previous"
+	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
+	 : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4)
+	 : "memory");
+    return n;
+}
+
+#define __copy_from_user_big(to, from, n, fixup, copy)	\
+    __asm__ __volatile__				\
+	("10: movesl (%1)+,%%d0\n"			\
+	 "    movel %%d0,(%0)+\n"			\
+	 "    subql #1,%2\n"				\
+	 "    jne 10b\n"				\
+	 ".section .fixup,\"ax\"\n"			\
+	 "    .even\n"					\
+	 "11: movel %2,%%d0\n"				\
+	 "13: clrl (%0)+\n"				\
+	 "    subql #1,%%d0\n"				\
+	 "    jne 13b\n"				\
+	 "    lsll #2,%2\n"				\
+	 fixup "\n"					\
+	 "    jra 12f\n"				\
+	 ".previous\n"					\
+	 ".section __ex_table,\"a\"\n"			\
+	 "    .align 4\n"				\
+	 "    .long 10b,11b\n"				\
+	 ".previous\n"					\
+	 copy "\n"					\
+	 "12:"						\
+	 : "=a"(to), "=a"(from), "=d"(n)		\
+	 : "0"(to), "1"(from), "2"(n/4)			\
+	 : "d0", "memory")
+
+static inline unsigned long
+__constant_copy_from_user(void *to, const void *from, unsigned long n)
+{
+    switch (n) {
+    case 0:
+	break;
+    case 1:
+	__asm__ __volatile__
+	    ("1: movesb (%1)+,%%d0\n"
+	     "   moveb %%d0,(%0)+\n"
+	     "2:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "3: addql #1,%2\n"
+	     "   clrb (%0)+\n"
+	     "   jra 2b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,3b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 2:
+	__asm__ __volatile__
+	    ("1: movesw (%1)+,%%d0\n"
+	     "   movew %%d0,(%0)+\n"
+	     "2:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "3: addql #2,%2\n"
+	     "   clrw (%0)+\n"
+	     "   jra 2b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,3b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 3:
+	__asm__ __volatile__
+	    ("1: movesw (%1)+,%%d0\n"
+	     "   movew %%d0,(%0)+\n"
+	     "2: movesb (%1)+,%%d0\n"
+	     "   moveb %%d0,(%0)+\n"
+	     "3:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "4: addql #2,%2\n"
+	     "   clrw (%0)+\n"
+	     "5: addql #1,%2\n"
+	     "   clrb (%0)+\n"
+	     "   jra 3b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,4b\n"
+	     "   .long 2b,5b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 4:
+	__asm__ __volatile__
+	    ("1: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "2:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "3: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "   jra 2b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,3b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 8:
+	__asm__ __volatile__
+	    ("1: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "2: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "3:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "4: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "5: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "   jra 3b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,4b\n"
+	     "   .long 2b,5b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 12:
+	__asm__ __volatile__
+	    ("1: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "2: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "3: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "4:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "5: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "6: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "7: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "   jra 4b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,5b\n"
+	     "   .long 2b,6b\n"
+	     "   .long 3b,7b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 16:
+	__asm__ __volatile__
+	    ("1: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "2: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "3: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "4: movesl (%1)+,%%d0\n"
+	     "   movel %%d0,(%0)+\n"
+	     "5:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "6: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "7: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "8: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "9: addql #4,%2\n"
+	     "   clrl (%0)+\n"
+	     "   jra 5b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 1b,6b\n"
+	     "   .long 2b,7b\n"
+	     "   .long 3b,8b\n"
+	     "   .long 4b,9b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    default:
+	switch (n & 3) {
+	case 0:
+	    __copy_from_user_big(to, from, n, "", "");
+	    break;
+	case 1:
+	    __copy_from_user_big(to, from, n,
+				 /* fixup */
+				 "1: addql #1,%2\n"
+				 "   clrb (%0)+",
+				 /* copy */
+				 "2: movesb (%1)+,%%d0\n"
+				 "   moveb %%d0,(%0)+\n"
+				 ".section __ex_table,\"a\"\n"
+				 "   .long 2b,1b\n"
+				 ".previous");
+	    break;
+	case 2:
+	    __copy_from_user_big(to, from, n,
+				 /* fixup */
+				 "1: addql #2,%2\n"
+				 "   clrw (%0)+",
+				 /* copy */
+				 "2: movesw (%1)+,%%d0\n"
+				 "   movew %%d0,(%0)+\n"
+				 ".section __ex_table,\"a\"\n"
+				 "   .long 2b,1b\n"
+				 ".previous");
+	    break;
+	case 3:
+	    __copy_from_user_big(to, from, n,
+				 /* fixup */
+				 "1: addql #2,%2\n"
+				 "   clrw (%0)+\n"
+				 "2: addql #1,%2\n"
+				 "   clrb (%0)+",
+				 /* copy */
+				 "3: movesw (%1)+,%%d0\n"
+				 "   movew %%d0,(%0)+\n"
+				 "4: movesb (%1)+,%%d0\n"
+				 "   moveb %%d0,(%0)+\n"
+				 ".section __ex_table,\"a\"\n"
+				 "   .long 3b,1b\n"
+				 "   .long 4b,2b\n"
+				 ".previous");
+	    break;
+	}
+	break;
+    }
+    return n;
+}
+
+#define __copy_to_user_big(to, from, n, fixup, copy)	\
+    __asm__ __volatile__				\
+	("10: movel (%1)+,%%d0\n"			\
+	 "31: movesl %%d0,(%0)+\n"			\
+	 "11: subql #1,%2\n"				\
+	 "    jne 10b\n"				\
+	 "41:\n"					\
+	 ".section .fixup,\"ax\"\n"			\
+	 "   .even\n"					\
+	 "22: addql #1,%2\n"				\
+	 "12: lsll #2,%2\n"				\
+	 fixup "\n"					\
+	 "    jra 13f\n"				\
+	 ".previous\n"					\
+	 ".section __ex_table,\"a\"\n"			\
+	 "    .align 4\n"				\
+	 "    .long 10b,22b\n"				\
+	 "    .long 31b,12b\n"				\
+	 "    .long 11b,12b\n"				\
+	 "    .long 41b,22b\n"				\
+	 ".previous\n"					\
+	 copy "\n"					\
+	 "13:"						\
+	 : "=a"(to), "=a"(from), "=d"(n)		\
+	 : "0"(to), "1"(from), "2"(n/4)			\
+	 : "d0", "memory")
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long
+__constant_copy_to_user(void *to, const void *from, unsigned long n)
+{
+    switch (n) {
+    case 0:
+	break;
+    case 1:
+	__asm__ __volatile__
+	    ("   moveb (%1)+,%%d0\n"
+	     "21:movesb %%d0,(%0)+\n"
+	     "1:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "2: addql #1,%2\n"
+	     "   jra 1b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n  "
+	     "   .long 21b,2b\n"
+	     "   .long 1b,2b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 2:
+	__asm__ __volatile__
+	    ("   movew (%1)+,%%d0\n"
+	     "21:movesw %%d0,(%0)+\n"
+	     "1:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "2: addql #2,%2\n"
+	     "   jra 1b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,2b\n"
+	     "   .long 1b,2b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 3:
+	__asm__ __volatile__
+	    ("   movew (%1)+,%%d0\n"
+	     "21:movesw %%d0,(%0)+\n"
+	     "1: moveb (%1)+,%%d0\n"
+	     "22:movesb %%d0,(%0)+\n"
+	     "2:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "3: addql #2,%2\n"
+	     "4: addql #1,%2\n"
+	     "   jra 2b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,3b\n"
+	     "   .long 1b,3b\n"
+	     "   .long 22b,4b\n"
+	     "   .long 2b,4b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 4:
+	__asm__ __volatile__
+	    ("   movel (%1)+,%%d0\n"
+	     "21:movesl %%d0,(%0)+\n"
+	     "1:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "2: addql #4,%2\n"
+	     "   jra 1b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,2b\n"
+	     "   .long 1b,2b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 8:
+	__asm__ __volatile__
+	    ("   movel (%1)+,%%d0\n"
+	     "21:movesl %%d0,(%0)+\n"
+	     "1: movel (%1)+,%%d0\n"
+	     "22:movesl %%d0,(%0)+\n"
+	     "2:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "3: addql #4,%2\n"
+	     "4: addql #4,%2\n"
+	     "   jra 2b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,3b\n"
+	     "   .long 1b,3b\n"
+	     "   .long 22b,4b\n"
+	     "   .long 2b,4b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 12:
+	__asm__ __volatile__
+	    ("   movel (%1)+,%%d0\n"
+	     "21:movesl %%d0,(%0)+\n"
+	     "1: movel (%1)+,%%d0\n"
+	     "22:movesl %%d0,(%0)+\n"
+	     "2: movel (%1)+,%%d0\n"
+	     "23:movesl %%d0,(%0)+\n"
+	     "3:\n"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "4: addql #4,%2\n"
+	     "5: addql #4,%2\n"
+	     "6: addql #4,%2\n"
+	     "   jra 3b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,4b\n"
+	     "   .long 1b,4b\n"
+	     "   .long 22b,5b\n"
+	     "   .long 2b,5b\n"
+	     "   .long 23b,6b\n"
+	     "   .long 3b,6b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    case 16:
+	__asm__ __volatile__
+	    ("   movel (%1)+,%%d0\n"
+	     "21:movesl %%d0,(%0)+\n"
+	     "1: movel (%1)+,%%d0\n"
+	     "22:movesl %%d0,(%0)+\n"
+	     "2: movel (%1)+,%%d0\n"
+	     "23:movesl %%d0,(%0)+\n"
+	     "3: movel (%1)+,%%d0\n"
+	     "24:movesl %%d0,(%0)+\n"
+	     "4:"
+	     ".section .fixup,\"ax\"\n"
+	     "   .even\n"
+	     "5: addql #4,%2\n"
+	     "6: addql #4,%2\n"
+	     "7: addql #4,%2\n"
+	     "8: addql #4,%2\n"
+	     "   jra 4b\n"
+	     ".previous\n"
+	     ".section __ex_table,\"a\"\n"
+	     "   .align 4\n"
+	     "   .long 21b,5b\n"
+	     "   .long 1b,5b\n"
+	     "   .long 22b,6b\n"
+	     "   .long 2b,6b\n"
+	     "   .long 23b,7b\n"
+	     "   .long 3b,7b\n"
+	     "   .long 24b,8b\n"
+	     "   .long 4b,8b\n"
+	     ".previous"
+	     : "=a"(to), "=a"(from), "=d"(n)
+	     : "0"(to), "1"(from), "2"(0)
+	     : "d0", "memory");
+	break;
+    default:
+	switch (n & 3) {
+	case 0:
+	    __copy_to_user_big(to, from, n, "", "");
+	    break;
+	case 1:
+	    __copy_to_user_big(to, from, n,
+			       /* fixup */
+			       "1: addql #1,%2",
+			       /* copy */
+			       "   moveb (%1)+,%%d0\n"
+			       "22:movesb %%d0,(%0)+\n"
+			       "2:"
+			       ".section __ex_table,\"a\"\n"
+			       "   .long 22b,1b\n"
+			       "   .long 2b,1b\n"
+			       ".previous");
+	    break;
+	case 2:
+	    __copy_to_user_big(to, from, n,
+			       /* fixup */
+			       "1: addql #2,%2",
+			       /* copy */
+			       "   movew (%1)+,%%d0\n"
+			       "22:movesw %%d0,(%0)+\n"
+			       "2:"
+			       ".section __ex_table,\"a\"\n"
+			       "   .long 22b,1b\n"
+			       "   .long 2b,1b\n"
+			       ".previous");
+	    break;
+	case 3:
+	    __copy_to_user_big(to, from, n,
+			       /* fixup */
+			       "1: addql #2,%2\n"
+			       "2: addql #1,%2",
+			       /* copy */
+			       "   movew (%1)+,%%d0\n"
+			       "23:movesw %%d0,(%0)+\n"
+			       "3: moveb (%1)+,%%d0\n"
+			       "24:movesb %%d0,(%0)+\n"
+			       "4:"
+			       ".section __ex_table,\"a\"\n"
+			       "   .long 23b,1b\n"
+			       "   .long 3b,1b\n"
+			       "   .long 24b,2b\n"
+			       "   .long 4b,2b\n"
+			       ".previous");
+	    break;
+	}
+	break;
+    }
+    return n;
+}
+
+#define copy_from_user(to, from, n)		\
+(__builtin_constant_p(n) ?			\
+ __constant_copy_from_user(to, from, n) :	\
+ __generic_copy_from_user(to, from, n))
+
+#define copy_to_user(to, from, n)		\
+(__builtin_constant_p(n) ?			\
+ __constant_copy_to_user(to, from, n) :		\
+ __generic_copy_to_user(to, from, n))
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+    long res;
+    if (count == 0) return count;
+    __asm__ __volatile__
+	("1: movesb (%2)+,%%d0\n"
+	 "12:moveb %%d0,(%1)+\n"
+	 "   jeq 2f\n"
+	 "   subql #1,%3\n"
+	 "   jne 1b\n"
+	 "2: subl %3,%0\n"
+	 "3:\n"
+	 ".section .fixup,\"ax\"\n"
+	 "   .even\n"
+	 "4: movel %4,%0\n"
+	 "   jra 3b\n"
+	 ".previous\n"
+	 ".section __ex_table,\"a\"\n"
+	 "   .align 4\n"
+	 "   .long 1b,4b\n"
+	 "   .long 12b,4b\n"
+	 ".previous"
+	 : "=d"(res), "=a"(dst), "=a"(src), "=d"(count)
+	 : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count)
+	 : "d0", "memory");
+    return res;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	long res;
+
+	res = -(long)src;
+	__asm__ __volatile__
+		("1:\n"
+		 "   tstl %2\n"
+		 "   jeq 3f\n"
+		 "2: movesb (%1)+,%%d0\n"
+		 "22:\n"
+		 "   subql #1,%2\n"
+		 "   tstb %%d0\n"
+		 "   jne 1b\n"
+		 "   jra 4f\n"
+		 "3:\n"
+		 "   addql #1,%0\n"
+		 "4:\n"
+		 "   addl %1,%0\n"
+		 "5:\n"
+		 ".section .fixup,\"ax\"\n"
+		 "   .even\n"
+		 "6: moveq %3,%0\n"
+		 "   jra 5b\n"
+		 ".previous\n"
+		 ".section __ex_table,\"a\"\n"
+		 "   .align 4\n"
+		 "   .long 2b,6b\n"
+		 "   .long 22b,6b\n"
+		 ".previous"
+		 : "=d"(res), "=a"(src), "=d"(n)
+		 : "i"(0), "0"(res), "1"(src), "2"(n)
+		 : "d0");
+	return res;
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user(void *to, unsigned long n)
+{
+    __asm__ __volatile__
+	("   tstl %1\n"
+	 "   jeq 3f\n"
+	 "1: movesl %3,(%0)+\n"
+	 "2: subql #1,%1\n"
+	 "   jne 1b\n"
+	 "3: movel %2,%1\n"
+	 "   bclr #1,%1\n"
+	 "   jeq 4f\n"
+	 "24:movesw %3,(%0)+\n"
+	 "4: bclr #0,%1\n"
+	 "   jeq 5f\n"
+	 "25:movesb %3,(%0)+\n"
+	 "5:\n"
+	 ".section .fixup,\"ax\"\n"
+	 "   .even\n"
+	 "61:addql #1,%1\n"
+	 "6: lsll #2,%1\n"
+	 "   addl %2,%1\n"
+	 "   jra 5b\n"
+	 "7: addql #2,%1\n"
+	 "   jra 5b\n"
+	 "8: addql #1,%1\n"
+	 "   jra 5b\n"
+	 ".previous\n"
+	 ".section __ex_table,\"a\"\n"
+	 "   .align 4\n"
+	 "   .long 1b,61b\n"
+	 "   .long 2b,6b\n"
+	 "   .long 3b,61b\n"
+	 "   .long 24b,7b\n"
+	 "   .long 4b,7b\n"
+	 "   .long 25b,8b\n"
+	 "   .long 5b,8b\n"
+	 ".previous"
+	 : "=a"(to), "=d"(n)
+	 : "r"(n & 3), "r"(0), "0"(to), "1"(n/4));
+    return n;
+}
+
+#endif /* _M68K_UACCESS_H */
diff --git a/include/asm-m68k/ucontext.h b/include/asm-m68k/ucontext.h
new file mode 100644
index 000000000000..e4e22669edc0
--- /dev/null
+++ b/include/asm-m68k/ucontext.h
@@ -0,0 +1,30 @@
+#ifndef _M68K_UCONTEXT_H
+#define _M68K_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+	int f_fpcntl[3];
+	int f_fpregs[8*3];
+} fpregset_t;
+
+struct mcontext {
+	int version;
+	gregset_t gregs;
+	fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct mcontext	  uc_mcontext;
+	unsigned long	  uc_filler[80];
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/include/asm-m68k/unaligned.h b/include/asm-m68k/unaligned.h
new file mode 100644
index 000000000000..804cb3f888fe
--- /dev/null
+++ b/include/asm-m68k/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef __M68K_UNALIGNED_H
+#define __M68K_UNALIGNED_H
+
+/*
+ * The m68k can do unaligned accesses itself.
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
new file mode 100644
index 000000000000..cbabde4f8a45
--- /dev/null
+++ b/include/asm-m68k/unistd.h
@@ -0,0 +1,465 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_vserver		278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+
+#define NR_syscalls		282
+
+/* user-visible error numbers are in the range -1 - -124: see
+   <asm-m68k/errno.h> */
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+	/* avoid using res which is declared to be in register d0; \
+	   errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+__asm__ __volatile__ ("trap  #0" \
+                      : "+d" (__res) ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,atype,a) \
+type name(atype a) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+register long __a __asm__ ("%d1") = (long)(a); \
+__asm__ __volatile__ ("trap  #0" \
+		      : "+d" (__res) \
+		      : "d" (__a)  ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,atype,a,btype,b) \
+type name(atype a,btype b) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+register long __a __asm__ ("%d1") = (long)(a); \
+register long __b __asm__ ("%d2") = (long)(b); \
+__asm__ __volatile__ ("trap  #0" \
+		      : "+d" (__res) \
+                      : "d" (__a), "d" (__b) \
+		     ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a,btype b,ctype c) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+register long __a __asm__ ("%d1") = (long)(a); \
+register long __b __asm__ ("%d2") = (long)(b); \
+register long __c __asm__ ("%d3") = (long)(c); \
+__asm__ __volatile__ ("trap  #0" \
+		      : "+d" (__res) \
+                      : "d" (__a), "d" (__b), \
+			"d" (__c) \
+		     ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name (atype a, btype b, ctype c, dtype d) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+register long __a __asm__ ("%d1") = (long)(a); \
+register long __b __asm__ ("%d2") = (long)(b); \
+register long __c __asm__ ("%d3") = (long)(c); \
+register long __d __asm__ ("%d4") = (long)(d); \
+__asm__ __volatile__ ("trap  #0" \
+                      : "+d" (__res) \
+                      : "d" (__a), "d" (__b), \
+			"d" (__c), "d" (__d)  \
+		     ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name (atype a,btype b,ctype c,dtype d,etype e) \
+{ \
+register long __res __asm__ ("%d0") = __NR_##name; \
+register long __a __asm__ ("%d1") = (long)(a); \
+register long __b __asm__ ("%d2") = (long)(b); \
+register long __c __asm__ ("%d3") = (long)(c); \
+register long __d __asm__ ("%d4") = (long)(d); \
+register long __e __asm__ ("%d5") = (long)(e); \
+__asm__ __volatile__ ("trap  #0" \
+		      : "+d" (__res) \
+		      : "d" (__a), "d" (__b), \
+			"d" (__c), "d" (__d), "d" (__e)  \
+                     ); \
+__syscall_return(type,__res); \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall1(int,_exit,int,exitcode)
+static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+asmlinkage long sys_mmap2(
+			unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(char *name, char **argv, char **envp);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct pt_regs;
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/include/asm-m68k/user.h b/include/asm-m68k/user.h
new file mode 100644
index 000000000000..e8d5a64c7e79
--- /dev/null
+++ b/include/asm-m68k/user.h
@@ -0,0 +1,89 @@
+#ifndef _M68K_USER_H
+#define _M68K_USER_H
+
+#include <asm/page.h>
+
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_m68kfp_struct {
+	unsigned long  fpregs[8*3];	/* fp0-fp7 registers */
+	unsigned long  fpcntl[3];	/* fp control regs */
+};
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+   is still the layout used by user (the new pt_regs doesn't have
+   all registers). */
+struct user_regs_struct {
+	long d1,d2,d3,d4,d5,d6,d7;
+	long a0,a1,a2,a3,a4,a5,a6;
+	long d0;
+	long usp;
+	long orig_d0;
+	short stkadj;
+	short sr;
+	long pc;
+	short fmtvec;
+	short __fill;
+};
+
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+  struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  struct user_regs_struct *u_ar0;
+				/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_m68kfp_struct* u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/include/asm-m68k/virtconvert.h b/include/asm-m68k/virtconvert.h
new file mode 100644
index 000000000000..8c4e8037b898
--- /dev/null
+++ b/include/asm-m68k/virtconvert.h
@@ -0,0 +1,76 @@
+#ifndef __VIRT_CONVERT__
+#define __VIRT_CONVERT__
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_AMIGA
+#include <asm/amigahw.h>
+#endif
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+#ifndef CONFIG_SUN3
+extern unsigned long mm_vtop(unsigned long addr) __attribute_const__;
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+#else
+static inline unsigned long mm_vtop(unsigned long vaddr)
+{
+	return __pa(vaddr);
+}
+
+static inline unsigned long mm_ptov(unsigned long paddr)
+{
+	return (unsigned long)__va(paddr);
+}
+#endif
+
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+static inline unsigned long virt_to_phys(void *vaddr)
+{
+	return (unsigned long)vaddr - PAGE_OFFSET + m68k_memory[0].addr;
+}
+
+static inline void * phys_to_virt(unsigned long paddr)
+{
+	return (void *)(paddr - m68k_memory[0].addr + PAGE_OFFSET);
+}
+#else
+static inline unsigned long virt_to_phys(void *address)
+{
+	return mm_vtop((unsigned long)address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return (void *) mm_ptov(address);
+}
+#endif
+
+/* Permanent address of a page. */
+#define __page_address(page)	(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+
+/*
+ * IO bus memory addresses are 1:1 with the physical address,
+ * except on the PCI bus of the Hades.
+ */
+#ifdef CONFIG_HADES
+#define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0))
+#define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0)))
+#else
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#endif
+
+#endif
+#endif
diff --git a/include/asm-m68k/vuid_event.h b/include/asm-m68k/vuid_event.h
new file mode 100644
index 000000000000..52ecb521a395
--- /dev/null
+++ b/include/asm-m68k/vuid_event.h
@@ -0,0 +1,4 @@
+#ifndef _M68K_VUID_EVENT_H
+#define _M68K_VUID_EVENT_H
+#include <asm-sparc/vuid_event.h>
+#endif
diff --git a/include/asm-m68k/xor.h b/include/asm-m68k/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-m68k/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-m68k/zorro.h b/include/asm-m68k/zorro.h
new file mode 100644
index 000000000000..cf816588bedb
--- /dev/null
+++ b/include/asm-m68k/zorro.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_M68K_ZORRO_H
+#define _ASM_M68K_ZORRO_H
+
+#include <asm/raw_io.h>
+
+#define z_readb raw_inb
+#define z_readw raw_inw
+#define z_readl raw_inl
+
+#define z_writeb raw_outb
+#define z_writew raw_outw
+#define z_writel raw_outl
+
+#define z_memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define z_memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define z_memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+static inline void *z_remap_nocache_ser(unsigned long physaddr,
+					unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void *z_remap_nocache_nonser(unsigned long physaddr,
+					   unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void *z_remap_writethrough(unsigned long physaddr,
+					 unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *z_remap_fullcache(unsigned long physaddr,
+				      unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define z_unmap iounmap
+#define z_iounmap iounmap
+#define z_ioremap z_remap_nocache_ser
+
+#endif /* _ASM_M68K_ZORRO_H */
diff --git a/include/asm-m68knommu/MC68328.h b/include/asm-m68knommu/MC68328.h
new file mode 100644
index 000000000000..4f5a9845f5be
--- /dev/null
+++ b/include/asm-m68knommu/MC68328.h
@@ -0,0 +1,1266 @@
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+ 
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR	0xfffff100
+#define GRPBASEB_ADDR	0xfffff102
+#define GRPBASEC_ADDR	0xfffff104
+#define GRPBASED_ADDR	0xfffff106
+
+#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED	WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V	  0x0001	/* Valid */
+#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers 
+ */
+#define GRPMASKA_ADDR	0xfffff108
+#define GRPMASKB_ADDR	0xfffff10a
+#define GRPMASKC_ADDR	0xfffff10c
+#define GRPMASKD_ADDR	0xfffff10e
+
+#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR	0xfffff110
+#define CSA1_ADDR	0xfffff114
+#define CSA2_ADDR	0xfffff118
+#define CSA3_ADDR	0xfffff11c
+
+#define CSA0		LONG_REF(CSA0_ADDR)
+#define CSA1		LONG_REF(CSA1_ADDR)
+#define CSA2		LONG_REF(CSA2_ADDR)
+#define CSA3		LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSA_WAIT_SHIFT	0
+#define CSA_RO		0x00000008	/* Read-Only */
+#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT	8
+#define CSA_BUSW	0x00010000	/* Bus Width Select */
+#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR	0xfffff120
+#define CSB1_ADDR	0xfffff124
+#define CSB2_ADDR	0xfffff128
+#define CSB3_ADDR	0xfffff12c
+
+#define CSB0		LONG_REF(CSB0_ADDR)
+#define CSB1		LONG_REF(CSB1_ADDR)
+#define CSB2		LONG_REF(CSB2_ADDR)
+#define CSB3		LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSB_WAIT_SHIFT	0
+#define CSB_RO		0x00000008	/* Read-Only */
+#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT	8
+#define CSB_BUSW	0x00010000	/* Bus Width Select */
+#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR	0xfffff130
+#define CSC1_ADDR	0xfffff134
+#define CSC2_ADDR	0xfffff138
+#define CSC3_ADDR	0xfffff13c
+
+#define CSC0		LONG_REF(CSC0_ADDR)
+#define CSC1		LONG_REF(CSC1_ADDR)
+#define CSC2		LONG_REF(CSC2_ADDR)
+#define CSC3		LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSC_WAIT_SHIFT	0
+#define CSC_RO		0x00000008	/* Read-Only */
+#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT	4
+#define CSC_BUSW	0x00010000	/* Bus Width Select */
+#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT	20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR	0xfffff140
+#define CSD1_ADDR	0xfffff144
+#define CSD2_ADDR	0xfffff148
+#define CSD3_ADDR	0xfffff14c
+
+#define CSD0		LONG_REF(CSD0_ADDR)
+#define CSD1		LONG_REF(CSD1_ADDR)
+#define CSD2		LONG_REF(CSD2_ADDR)
+#define CSD3		LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSD_WAIT_SHIFT	0
+#define CSD_RO		0x00000008	/* Read-Only */
+#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT	4
+#define CSD_BUSW	0x00010000	/* Bus Width Select */
+#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT	20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+ 
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+ 
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
+#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define	INT4_IRQ_NUM	12	/* External INT4 */
+#define	INT5_IRQ_NUM	13	/* External INT5 */
+#define	INT6_IRQ_NUM	14	/* External INT6 */
+#define	INT7_IRQ_NUM	15	/* External INT7 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define PEN_IRQ_NUM	20	/* Pen Interrupt */
+#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM	23	/* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM	SPIM_IRQ_NUM
+#define TMR_IRQ_NUM	TMR1_IRQ_NUM
+ 
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
+#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
+#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
+#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
+#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
+#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
+#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
+#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI	IMR_MSPIM
+#define IMR_MTMR	IMR_MTMR1
+
+/* 
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR	0xfffff308
+#define IWR		LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI	ISR_SPIM
+#define ISR_TMR	ISR_TMR1
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff310
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI	IPR_SPIM
+#define IPR_TMR	IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PASEL_ADDR	0xfffff403		/* Port A Select register */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PASEL		BYTE_REF(PASEL_ADDR)
+
+#define PA(x)           (1 << (x))
+#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
+
+#define PA_A16		PA(0)		/* Use A16 as PA(0) */
+#define PA_A17		PA(1)		/* Use A17 as PA(1) */
+#define PA_A18		PA(2)		/* Use A18 as PA(2) */
+#define PA_A19		PA(3)		/* Use A19 as PA(3) */
+#define PA_A20		PA(4)		/* Use A20 as PA(4) */
+#define PA_A21		PA(5)		/* Use A21 as PA(5) */
+#define PA_A22		PA(6)		/* Use A22 as PA(6) */
+#define PA_A23		PA(7)		/* Use A23 as PA(7) */
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+#define PB_D(x)		PB(x)		/* This is specific to port B only */
+
+#define PB_D0		PB(0)		/* Use D0 as PB(0) */
+#define PB_D1		PB(1)		/* Use D1 as PB(1) */
+#define PB_D2		PB(2)		/* Use D2 as PB(2) */
+#define PB_D3		PB(3)		/* Use D3 as PB(3) */
+#define PB_D4		PB(4)		/* Use D4 as PB(4) */
+#define PB_D5		PB(5)		/* Use D5 as PB(5) */
+#define PB_D6		PB(6)		/* Use D6 as PB(6) */
+#define PB_D7		PB(7)		/* Use D7 as PB(7) */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_WE		PC(6)		/* Use WE    as PC(6) */
+#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
+#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
+#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
+#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
+#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
+
+#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
+#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
+#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
+#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
+#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
+#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
+#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
+#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
+#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
+#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
+#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
+#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
+#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
+#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
+
+#define PF_A24		PF(0)	/* Use A24 as PF(0) */
+#define PF_A25		PF(1)	/* Use A25 as PF(1) */
+#define PF_A26		PF(2)	/* Use A26 as PF(2) */
+#define PF_A27		PF(3)	/* Use A27 as PF(3) */
+#define PF_A28		PF(4)	/* Use A28 as PF(4) */
+#define PF_A29		PF(5)	/* Use A29 as PF(5) */
+#define PF_A30		PF(6)	/* Use A30 as PF(6) */
+#define PF_A31		PF(7)	/* Use A31 as PF(7) */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
+#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
+#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
+#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
+#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
+#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
+#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
+#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x)) 
+
+#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
+
+/* 
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)           (1 << (x))
+
+/* 
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff439		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)           (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_PWMEN		0x0010	/* Enable PWM */
+#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
+#define PWMC_PIN		0x0080	/* Current PWM output pin status */
+#define PWMC_LOAD		0x0100	/* Force a new period */
+#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN	PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff502
+#define PWMP		WORD_REF(PWMP_ADDR)
+
+/* 
+ * PWM Width Register 
+ */
+#define PWMW_ADDR	0xfffff504
+#define PWMW		WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff506
+#define PWMCNT		WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/* 
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR	0xfffff600
+#define TCTL1		WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR	0xfffff60c
+#define TCTL2		WORD_REF(TCTL2_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR	TCTL1_ADDR
+#define TCTL		TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR	0xfffff602
+#define TPRER1		WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR	0xfffff60e
+#define TPRER2		WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR	TPRER1_ADDR
+#define TPRER		TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR	0xfffff604
+#define TCMP1		WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR	0xfffff610
+#define TCMP2		WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR	TCMP1_ADDR
+#define TCMP		TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR	0xfffff606
+#define TCR1		WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR	0xfffff612
+#define TCR2		WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR	TCR1_ADDR
+#define TCR		TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR	0xfffff608
+#define TCN1		WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR	0xfffff614
+#define TCN2		WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR	TCN1_ADDR
+#define TCN		TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR	0xfffff60a
+#define TSTAT1		WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR	0xfffff616
+#define TSTAT2		WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR	TSTAT1_ADDR
+#define TSTAT		TSTAT1
+
+/*
+ * Watchdog Compare Register 
+ */
+#define WRR_ADDR	0xfffff61a
+#define WRR		WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register 
+ */
+#define WCN_ADDR	0xfffff61c
+#define WCN		WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR	0xfffff618
+#define WCSR		WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN	0x0001	/* Watchdog Enable */
+#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST	0x0004	/* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR	0xfffff700
+#define SPISR		WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR	0xfffff701
+#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
+#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
+#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
+#define SPISR_DATARDY	 0x1000	/* Data ready */
+#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
+#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
+#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP		0x0200	/* Stop bit transmission */
+#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
+#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
+#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN		0x4000	/* Receiver Enable */
+#define USTCNT_UARTEN		0x8000	/* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE	USTCNT_TXAVAILEN 
+#define USTCNT_TXHE	USTCNT_TXHALFEN
+#define USTCNT_TXEE	USTCNT_TXEMPTYEN
+#define USTCNT_RXRE	USTCNT_RXREADYEN
+#define USTCNT_RXHE	USTCNT_RXHALFEN
+#define USTCNT_RXFE	USTCNT_RXFULLEN
+#define USTCNT_CTSD	USTCNT_CTSDELTAEN
+#define USTCNT_ODD	USTCNT_ODD_EVEN
+#define USTCNT_PEN	USTCNT_PARITYEN
+#define USTCNT_CLKM	USTCNT_CLKMODE
+#define USTCNT_UEN	USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
+#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
+#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
+#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STATUS	 0x0200	/* CTS State */
+#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT	UTX_CTS_STATUS
+#define UTX_NOCTS	UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+  volatile unsigned short int pad3;
+} m68328_uart __attribute__((packed));
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x02
+#define   LPICF_PBSIZ_4    0x04
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
+#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16	 0x40	/* DMA burst length */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK	LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR	0xfffffa29
+#define LLBAR		BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register 
+ */
+#define LOTCR_ADDR	0xfffffa2b
+#define LOTCR		BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa32
+#define LGPMR		WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK	0x000f
+#define LGPMR_GLEVEL3_SHIFT	0 
+#define LGPMR_GLEVEL2_MASK	0x00f0
+#define LGPMR_GLEVEL2_SHIFT	4 
+#define LGPMR_GLEVEL0_MASK	0x0f00
+#define LGPMR_GLEVEL0_SHIFT	8 
+#define LGPMR_GLEVEL1_MASK	0xf000
+#define LGPMR_GLEVEL1_SHIFT	12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384	0x0020	/* Crystal Selection */
+#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL	RTCCTL_384
+#define RTCCTL_EN	RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
diff --git a/include/asm-m68knommu/MC68332.h b/include/asm-m68knommu/MC68332.h
new file mode 100644
index 000000000000..6bb8f02685a2
--- /dev/null
+++ b/include/asm-m68knommu/MC68332.h
@@ -0,0 +1,152 @@
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR	0xfffa11
+#define PORTE	BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR	0xfffa15
+#define DDRE	BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR	0xfffa17
+#define PEPAR	BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR	0xfffa19
+#define PORTF	BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR	0xfffa1d
+#define DDRF	BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR	0xfffa1f
+#define PFPAR	BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR	0xfffc15
+#define PORTQS	BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR	0xfffc17
+#define DDRQS	BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR	0xfffc16
+#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC	0x0000
+#define CSOR_MODE_SYNC	0x8000
+#define CSOR_MODE_MASK	0x8000
+#define CSOR_BYTE_DISABLE	0x0000
+#define CSOR_BYTE_UPPER		0x4000
+#define CSOR_BYTE_LOWER		0x2000
+#define CSOR_BYTE_BOTH		0x6000
+#define CSOR_BYTE_MASK		0x6000
+#define CSOR_RW_RSVD		0x0000
+#define CSOR_RW_READ		0x0800
+#define CSOR_RW_WRITE		0x1000
+#define CSOR_RW_BOTH		0x1800
+#define CSOR_RW_MASK		0x1800
+#define CSOR_STROBE_DS		0x0400
+#define CSOR_STROBE_AS		0x0000
+#define CSOR_STROBE_MASK	0x0400
+#define CSOR_DSACK_WAIT(x)	(wait << 6)
+#define CSOR_DSACK_FTERM	(14 << 6)
+#define CSOR_DSACK_EXTERNAL	(15 << 6)
+#define CSOR_DSACK_MASK		0x03c0
+#define CSOR_SPACE_CPU		0x0000
+#define CSOR_SPACE_USER		0x0010
+#define CSOR_SPACE_SU		0x0020
+#define CSOR_SPACE_BOTH		0x0030
+#define CSOR_SPACE_MASK		0x0030
+#define CSOR_IPL_ALL		0x0000
+#define CSOR_IPL_PRIORITY(x)	(x << 1)
+#define CSOR_IPL_MASK		0x000e
+#define CSOR_AVEC_ON		0x0001
+#define CSOR_AVEC_OFF		0x0000
+#define CSOR_AVEC_MASK		0x0001
+
+#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
+#define CSBAR_ADDR_MASK		0xfff8
+#define CSBAR_BLKSIZE_2K	0x0000
+#define CSBAR_BLKSIZE_8K	0x0001
+#define CSBAR_BLKSIZE_16K	0x0002
+#define CSBAR_BLKSIZE_64K	0x0003
+#define CSBAR_BLKSIZE_128K	0x0004
+#define CSBAR_BLKSIZE_256K	0x0005
+#define CSBAR_BLKSIZE_512K	0x0006
+#define CSBAR_BLKSIZE_1M	0x0007
+#define CSBAR_BLKSIZE_MASK	0x0007
+
+#define CSPAR_DISC	0
+#define CSPAR_ALT	1
+#define CSPAR_CS8	2
+#define CSPAR_CS16	3
+#define CSPAR_MASK	3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x)	(x << 2)
+#define CSPAR0_CS1(x)	(x << 4)
+#define CSPAR0_CS2(x)	(x << 6)
+#define CSPAR0_CS3(x)	(x << 8)
+#define CSPAR0_CS4(x)	(x << 10)
+#define CSPAR0_CS5(x)	(x << 12)
+
+#define CSPAR1_CS6(x)	(x << 0)
+#define CSPAR1_CS7(x)	(x << 2)
+#define CSPAR1_CS8(x)	(x << 4)
+#define CSPAR1_CS9(x)	(x << 6)
+#define CSPAR1_CS10(x)	(x << 8)
+
+#endif
diff --git a/include/asm-m68knommu/MC68EZ328.h b/include/asm-m68knommu/MC68EZ328.h
new file mode 100644
index 000000000000..801933da4c70
--- /dev/null
+++ b/include/asm-m68knommu/MC68EZ328.h
@@ -0,0 +1,1253 @@
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI_IRQ_NUM	0	/* SPI interrupt */
+#define TMR_IRQ_NUM	1	/* Timer interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+} m68328_uart __attribute__((packed));
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
diff --git a/include/asm-m68knommu/MC68VZ328.h b/include/asm-m68knommu/MC68VZ328.h
new file mode 100644
index 000000000000..df74322f37ed
--- /dev/null
+++ b/include/asm-m68knommu/MC68VZ328.h
@@ -0,0 +1,1349 @@
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
+ * 				Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
+#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
+#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
+#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+#define SPI_IRQ_NUM	SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+#define UART_IRQ_NUM	UART1_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)		(1 << (x))
+
+#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
+#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
+#define PK_R_W		0x02	/* Use R/W  as PK[1] */
+#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
+#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
+#define PK_LD4		0x10	/* Use LD4 as PK[4] */
+#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
+#define PK_LD6		0x40	/* Use LD6 as PK[6] */
+#define PK_LD7		0x80	/* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
+#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
+#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
+#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
+#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
+#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
+#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
+#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff449		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)		(1 << (x))
+
+#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
+#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
+#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
+#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
+#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
+#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int hmark;
+  volatile unsigned short int unused;
+} m68328_uart __attribute__((packed));
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
diff --git a/include/asm-m68knommu/a.out.h b/include/asm-m68knommu/a.out.h
new file mode 100644
index 000000000000..ce18ef99de04
--- /dev/null
+++ b/include/asm-m68knommu/a.out.h
@@ -0,0 +1 @@
+#include <asm-m68k/a.out.h>
diff --git a/include/asm-m68knommu/anchor.h b/include/asm-m68knommu/anchor.h
new file mode 100644
index 000000000000..75390e0b40c9
--- /dev/null
+++ b/include/asm-m68knommu/anchor.h
@@ -0,0 +1,112 @@
+/****************************************************************************/
+
+/*
+ *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef	anchor_h
+#define	anchor_h
+/****************************************************************************/
+
+/*
+ *	Define basic addressing info.
+ */
+#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407)
+#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#else
+#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ *	4-byte registers of CO-MEM, so adjust register addresses for
+ *	easy access. Handy macro for word access too.
+ */
+#define	LREG(a)		((a) >> 2)
+#define	WREG(a)		((a) >> 1)
+
+
+/*
+ *	Define base addresses within CO-MEM Lite register address space.
+ */
+#define	COMEM_I2O	0x0000		/* I2O registers */
+#define	COMEM_OPREGS	0x0400		/* Operation registers */
+#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
+#define	COMEM_SHMEM	0x4000		/* Shared memory region */
+
+#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
+
+
+/*
+ *	Define CO-MEM Registers.
+ */
+#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
+#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
+#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
+#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
+#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
+#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
+#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
+#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
+
+#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
+
+#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
+#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
+#define	COMEM_NVSTAT	0x04a8		/* I2C status */
+
+#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
+#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
+#define	COMEM_DMASIZE	0x04b8		/* DMA size */
+#define	COMEM_DMACTL	0x04bc		/* DMA control */
+
+#define	COMEM_HCTL	0x04e0		/* Host control */
+#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
+#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
+#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
+#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
+
+#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
+
+
+/*
+ *	Commands and flags for use with Direct Access Register.
+ */
+#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
+#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
+#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
+#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
+#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
+#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
+#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
+#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
+
+#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
+
+#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
+
+
+/*
+ *	The PCI bus will be limited in what slots will actually be used.
+ *	Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407)
+#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
+#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
+#else
+#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
+#endif
+
+#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif	/* anchor_h */
diff --git a/include/asm-m68knommu/asm-offsets.h b/include/asm-m68knommu/asm-offsets.h
new file mode 100644
index 000000000000..825f6e210f19
--- /dev/null
+++ b/include/asm-m68knommu/asm-offsets.h
@@ -0,0 +1,49 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by arch/m68knommu/Makefile
+ *
+ */
+
+#define TASK_STATE 0 /* offsetof(struct task_struct, state) */
+#define TASK_FLAGS 12 /* offsetof(struct task_struct, flags) */
+#define TASK_PTRACE 16 /* offsetof(struct task_struct, ptrace) */
+#define TASK_BLOCKED 922 /* offsetof(struct task_struct, blocked) */
+#define TASK_THREAD 772 /* offsetof(struct task_struct, thread) */
+#define TASK_THREAD_INFO 4 /* offsetof(struct task_struct, thread_info) */
+#define TASK_MM 92 /* offsetof(struct task_struct, mm) */
+#define TASK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */
+#define CPUSTAT_SOFTIRQ_PENDING 0 /* offsetof(irq_cpustat_t, __softirq_pending) */
+#define THREAD_KSP 0 /* offsetof(struct thread_struct, ksp) */
+#define THREAD_USP 4 /* offsetof(struct thread_struct, usp) */
+#define THREAD_SR 8 /* offsetof(struct thread_struct, sr) */
+#define THREAD_FS 10 /* offsetof(struct thread_struct, fs) */
+#define THREAD_CRP 12 /* offsetof(struct thread_struct, crp) */
+#define THREAD_ESP0 20 /* offsetof(struct thread_struct, esp0) */
+#define THREAD_FPREG 24 /* offsetof(struct thread_struct, fp) */
+#define THREAD_FPCNTL 120 /* offsetof(struct thread_struct, fpcntl) */
+#define THREAD_FPSTATE 132 /* offsetof(struct thread_struct, fpstate) */
+#define PT_D0 32 /* offsetof(struct pt_regs, d0) */
+#define PT_ORIG_D0 36 /* offsetof(struct pt_regs, orig_d0) */
+#define PT_D1 0 /* offsetof(struct pt_regs, d1) */
+#define PT_D2 4 /* offsetof(struct pt_regs, d2) */
+#define PT_D3 8 /* offsetof(struct pt_regs, d3) */
+#define PT_D4 12 /* offsetof(struct pt_regs, d4) */
+#define PT_D5 16 /* offsetof(struct pt_regs, d5) */
+#define PT_A0 20 /* offsetof(struct pt_regs, a0) */
+#define PT_A1 24 /* offsetof(struct pt_regs, a1) */
+#define PT_A2 28 /* offsetof(struct pt_regs, a2) */
+#define PT_PC 48 /* offsetof(struct pt_regs, pc) */
+#define PT_SR 46 /* offsetof(struct pt_regs, sr) */
+#define PT_VECTOR 52 /* offsetof(struct pt_regs, pc) + 4 */
+#define STAT_IRQ 5140 /* offsetof(struct kernel_stat, irqs) */
+#define SIGSEGV 11 /* SIGSEGV */
+#define SEGV_MAPERR 196609 /* SEGV_MAPERR */
+#define SIGTRAP 5 /* SIGTRAP */
+#define TRAP_TRACE 196610 /* TRAP_TRACE */
+#define PT_PTRACED 1 /* PT_PTRACED */
+#define PT_DTRACE 2 /* PT_DTRACE */
+
+#endif
diff --git a/include/asm-m68knommu/atomic.h b/include/asm-m68knommu/atomic.h
new file mode 100644
index 000000000000..b1957fba083b
--- /dev/null
+++ b/include/asm-m68knommu/atomic.h
@@ -0,0 +1,134 @@
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <asm/system.h>	/* local_irq_XXX() */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+	char c;
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "d" (i));
+#else
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "di" (i));
+#endif
+	return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+extern __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+extern __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
new file mode 100644
index 000000000000..f95e32b40425
--- /dev/null
+++ b/include/asm-m68knommu/bitops.h
@@ -0,0 +1,503 @@
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* save_flags */
+
+#ifdef __KERNEL__
+
+/*
+ *	Generic ffs().
+ */
+static inline int ffs(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ *	Generic __ffs().
+ */
+static inline int __ffs(int x)
+{
+	int r = 0;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while(word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bset %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bclr %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bchg %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+#define find_first_bit(addr, size) \
+        find_next_bit((addr), (size), 0)
+
+static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL >> size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+/*
+ * Find next one bit in a bitmap reasonably efficiently.
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("btst %2,%1; sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+/*
+ * fls: find last bit set.
+ */
+#define fls(x) generic_fls(x)
+
+#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/include/asm-m68knommu/bootinfo.h b/include/asm-m68knommu/bootinfo.h
new file mode 100644
index 000000000000..c12e526f5189
--- /dev/null
+++ b/include/asm-m68knommu/bootinfo.h
@@ -0,0 +1,2 @@
+
+/* Nothing for m68knommu */
diff --git a/include/asm-m68knommu/bootstd.h b/include/asm-m68knommu/bootstd.h
new file mode 100644
index 000000000000..3fdc79f06d50
--- /dev/null
+++ b/include/asm-m68knommu/bootstd.h
@@ -0,0 +1,132 @@
+/* bootstd.h:  Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21            /* last used bootloader system call */
+
+#define __BN_reset        0  /* reset and start the bootloader */
+#define __BN_test         1  /* tests the system call interface */
+#define __BN_exec         2  /* executes a bootloader image */
+#define __BN_exit         3  /* terminates a bootloader image */
+#define __BN_program      4  /* program FLASH from a chain */
+#define __BN_erase        5  /* erase sector(s) of FLASH */
+#define __BN_open         6
+#define __BN_write        7
+#define __BN_read         8
+#define __BN_close        9
+#define __BN_mmap         10 /* map a file descriptor into memory */
+#define __BN_munmap       11 /* remove a file to memory mapping */
+#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv      14 /* get a bootloader envvar */
+#define __BN_setbenv      15 /* get a bootloader envvar */
+#define __BN_setpmask     16 /* set the protection mask */
+#define __BN_readenv      17 /* read environment variables */
+#define __BN_flash_chattr_range		18
+#define __BN_flash_erase_range		19
+#define __BN_flash_write_range		20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+      /* let errno be a function, preserve res in %d0 */ \
+      int __err = -(res); \
+      errno = __err; \
+      res = -1; \
+   } \
+   return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   register long __e __asm__ ("%d5") = (long)e; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d), "d" (__e) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
diff --git a/include/asm-m68knommu/bug.h b/include/asm-m68knommu/bug.h
new file mode 100644
index 000000000000..70e7dc0af21a
--- /dev/null
+++ b/include/asm-m68knommu/bug.h
@@ -0,0 +1,4 @@
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-m68knommu/bugs.h b/include/asm-m68knommu/bugs.h
new file mode 100644
index 000000000000..5f382dac3a60
--- /dev/null
+++ b/include/asm-m68knommu/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-m68knommu/byteorder.h b/include/asm-m68knommu/byteorder.h
new file mode 100644
index 000000000000..8fcde907b0f9
--- /dev/null
+++ b/include/asm-m68knommu/byteorder.h
@@ -0,0 +1,13 @@
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/include/asm-m68knommu/cache.h b/include/asm-m68knommu/cache.h
new file mode 100644
index 000000000000..24e9eace5f8c
--- /dev/null
+++ b/include/asm-m68knommu/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/include/asm-m68knommu/cachectl.h b/include/asm-m68knommu/cachectl.h
new file mode 100644
index 000000000000..bcf5a6a9dd52
--- /dev/null
+++ b/include/asm-m68knommu/cachectl.h
@@ -0,0 +1 @@
+#include <asm-m68k/cachectl.h>
diff --git a/include/asm-m68knommu/cacheflush.h b/include/asm-m68knommu/cacheflush.h
new file mode 100644
index 000000000000..aa7a2ffa41af
--- /dev/null
+++ b/include/asm-m68knommu/cacheflush.h
@@ -0,0 +1,75 @@
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all()			__flush_cache_all()
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_range(start,len)		do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start,len)		__flush_cache_all()
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+extern inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+	/*
+	 *	Use cpushl to push and invalidate all cache lines.
+	 *	Gas doesn't seem to know how to generate the ColdFire
+	 *	cpushl instruction... Oh well, bit stuff it for now.
+	 */
+	__asm__ __volatile__ (
+		"nop\n\t"
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	#0x10,%%a0\n\t"
+		"cmpl	#0x00000800,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	#4,%%d0\n\t"
+		"bne	1b\n\t"
+		"movel	#0xb6088500,%%d0\n\t"
+		"movec	%%d0,%%CACR\n\t"
+		: : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#ifdef CONFIG_M5272
+	__asm__ __volatile__ (
+        	"movel	#0x01000000, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+        	"movel	#0x80000100, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5272 */
+#if 0 /* CONFIG_M5249 */
+	__asm__ __volatile__ (
+        	"movel	#0x01000000, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+        	"movel	#0xa0000200, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5249 */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/include/asm-m68knommu/checksum.h b/include/asm-m68knommu/checksum.h
new file mode 100644
index 000000000000..92cf102c2534
--- /dev/null
+++ b/include/asm-m68knommu/checksum.h
@@ -0,0 +1,133 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+						int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+#ifdef CONFIG_COLDFIRE
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+#else
+	unsigned int tmp = sum;
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (sum));
+#endif
+	return ~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	__asm__ ("addl  %1,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "addxl %5,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=&d" (saddr)
+		 : "0" (daddr), "1" (saddr), "d" (len + proto),
+		   "d"(sum));
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern unsigned short ip_compute_csum(const unsigned char * buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
+		__u32 len, unsigned short proto, unsigned int sum) 
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/include/asm-m68knommu/coldfire.h b/include/asm-m68knommu/coldfire.h
new file mode 100644
index 000000000000..16f32cc80c40
--- /dev/null
+++ b/include/asm-m68knommu/coldfire.h
@@ -0,0 +1,86 @@
+/****************************************************************************/
+
+/*
+ *	coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	coldfire_h
+#define	coldfire_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the processor support peripherals base address.
+ *	This is generally setup by the boards start up code.
+ */
+#define	MCF_MBAR	0x10000000
+#define	MCF_MBAR2	0x80000000
+#define	MCF_IPSBAR	0x40000000
+
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#undef MCF_MBAR
+#define	MCF_MBAR	MCF_IPSBAR
+#endif
+
+/*
+ *	Define master clock frequency.
+ */
+#if defined(CONFIG_CLOCK_11MHz)
+#define	MCF_CLK		11289600
+#elif defined(CONFIG_CLOCK_16MHz)
+#define	MCF_CLK		16000000
+#elif defined(CONFIG_CLOCK_20MHz)
+#define	MCF_CLK		20000000
+#elif defined(CONFIG_CLOCK_24MHz)
+#define	MCF_CLK		24000000
+#elif defined(CONFIG_CLOCK_25MHz)
+#define	MCF_CLK		25000000
+#elif defined(CONFIG_CLOCK_33MHz)
+#define	MCF_CLK		33000000
+#elif defined(CONFIG_CLOCK_40MHz)
+#define	MCF_CLK		40000000
+#elif defined(CONFIG_CLOCK_45MHz)
+#define	MCF_CLK		45000000
+#elif defined(CONFIG_CLOCK_48MHz)
+#define	MCF_CLK		48000000
+#elif defined(CONFIG_CLOCK_50MHz)
+#define	MCF_CLK		50000000
+#elif defined(CONFIG_CLOCK_54MHz)
+#define	MCF_CLK		54000000
+#elif defined(CONFIG_CLOCK_60MHz)
+#define	MCF_CLK		60000000
+#elif defined(CONFIG_CLOCK_64MHz)
+#define	MCF_CLK		64000000
+#elif defined(CONFIG_CLOCK_66MHz)
+#define	MCF_CLK		66000000
+#elif defined(CONFIG_CLOCK_70MHz)
+#define	MCF_CLK		70000000
+#elif defined(CONFIG_CLOCK_100MHz)
+#define	MCF_CLK		100000000
+#elif defined(CONFIG_CLOCK_140MHz)
+#define	MCF_CLK		140000000
+#elif defined(CONFIG_CLOCK_150MHz)
+#define	MCF_CLK		150000000
+#elif defined(CONFIG_CLOCK_166MHz)
+#define	MCF_CLK		166000000
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ *	One some ColdFire family members the bus clock (used by internal
+ *	peripherals) is not the same as the CPU clock.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M527x)
+#define	MCF_BUSCLK	(MCF_CLK / 2)
+#else
+#define	MCF_BUSCLK	MCF_CLK
+#endif
+
+/****************************************************************************/
+#endif	/* coldfire_h */
diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
new file mode 100644
index 000000000000..e522ca8193a2
--- /dev/null
+++ b/include/asm-m68knommu/commproc.h
@@ -0,0 +1,723 @@
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+#include <linux/config.h>
+
+/* CPM Command register masks: */
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
+#define CPM_CR_GCI_ABORT	((ushort)0x000a)
+#define CPM_CR_RESET_BCS	((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1	((ushort)0x0000)
+#define CPM_CR_CH_SCC2	((ushort)0x0004)
+#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
+#define CPM_CR_CH_TMR	((ushort)0x0005)
+#define CPM_CR_CH_SCC3	((ushort)0x0008)
+#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1	((ushort)0x0009)
+#define CPM_CR_CH_SCC4	((ushort)0x000c)
+#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2	((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE	((uint)0x0000)
+#define CPM_DATAONLY_SIZE	((uint)0x0800)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
+extern QUICC *pquicc;
+uint         m360_cpm_dpalloc(uint size);
+/* void         *m360_cpm_hostalloc(uint size); */
+void	      m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
+
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
+
+#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
+#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
+
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
+
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so 
+ * instead, we need only a parameter ram `slot'  */
+
+#define PRSLOT_SCC1	0
+#define PRSLOT_SCC2	1
+#define PRSLOT_SCC3	2
+#define PRSLOT_SMC1	2
+#define PRSLOT_SCC4	3
+#define PRSLOT_SMC2	3
+
+
+/* #define PROFF_SCC1	((uint)0x0000) */
+/* #define PROFF_SCC2	((uint)0x0100) */
+/* #define PROFF_SCC3	((uint)0x0200) */
+/* #define PROFF_SMC1	((uint)0x0280) */
+/* #define PROFF_SCC4	((uint)0x0300) */
+/* #define PROFF_SMC2	((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ *  68360    - lxt905
+ * PA0/RXD1  - rxd
+ * PA1/TXD1  - txd
+ * PA8/CLK1  - tclk
+ * PA9/CLK2  - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1  - cd
+ */
+#define PA_ENET_RXD	PA_RXD1
+#define PA_ENET_TXD	PA_TXD1
+#define PA_ENET_TCLK	PA_CLK1
+#define PA_ENET_RCLK	PA_CLK2
+#define PC_ENET_TENA	PC_RTS1
+#define PC_ENET_CLSN	PC_CTS1
+#define PC_ENET_RENA	PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PC_ENET_TENA	((ushort)0x0001)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP	((uint)0x00000004)
+#define PB_BSE_FDXDIS	((uint)0x00008000)
+#define PC_BSE_LOOPBACK	((ushort)0x0800)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002c00)
+#endif
+
+#ifdef CONFIG_RPXCLASSIC
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00001000)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC		((ushort)0x8000)
+#define SCU_PMSR_SL		((ushort)0x4000)
+#define SCU_PMSR_CL		((ushort)0x3000)
+#define SCU_PMSR_UM		((ushort)0x0c00)
+#define SCU_PMSR_FRZ		((ushort)0x0200)
+#define SCU_PMSR_RZS		((ushort)0x0100)
+#define SCU_PMSR_SYN		((ushort)0x0080)
+#define SCU_PMSR_DRT		((ushort)0x0040)
+#define SCU_PMSR_PEN		((ushort)0x0010)
+#define SCU_PMSR_RPM		((ushort)0x000c)
+#define SCU_PMSR_REVP		((ushort)0x0008)
+#define SCU_PMSR_TPM		((ushort)0x0003)
+#define SCU_PMSR_TEVP		((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR		32 */
+/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
+/* #define	CPMVEC_SCC1		((ushort)0x1e) */
+/* #define	CPMVEC_SCC2		((ushort)0x1d) */
+/* #define	CPMVEC_SCC3		((ushort)0x1c) */
+/* #define	CPMVEC_SCC4		((ushort)0x1b) */
+/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
+/* #define	CPMVEC_TIMER1		((ushort)0x19) */
+/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
+/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
+/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_I2C		((ushort)0x10) */
+/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
+/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
+/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
+/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
+/* #define	CPMVEC_SPI		((ushort)0x05) */
+/* #define	CPMVEC_SMC1		((ushort)0x04) */
+/* #define	CPMVEC_SMC2		((ushort)0x03) */
+/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
+/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
+/* #define	CPMVEC_ERROR		((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+#endif /* __CPM_360__ */
diff --git a/include/asm-m68knommu/cputime.h b/include/asm-m68knommu/cputime.h
new file mode 100644
index 000000000000..a0c4a660878d
--- /dev/null
+++ b/include/asm-m68knommu/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_CPUTIME_H
+#define __M68KNOMMU_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/include/asm-m68knommu/current.h b/include/asm-m68knommu/current.h
new file mode 100644
index 000000000000..53ee0f9f7cef
--- /dev/null
+++ b/include/asm-m68knommu/current.h
@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/include/asm-m68knommu/dbg.h b/include/asm-m68knommu/dbg.h
new file mode 100644
index 000000000000..27af3270f671
--- /dev/null
+++ b/include/asm-m68knommu/dbg.h
@@ -0,0 +1,6 @@
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define	BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h
new file mode 100644
index 000000000000..e3a976254672
--- /dev/null
+++ b/include/asm-m68knommu/delay.h
@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+	/* The coldfire runs this loop at significantly different speeds
+	 * depending upon long word alignment or not.  We'll pad it to
+	 * long word alignment which is the faster version.
+	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
+	 * than using a NOP (0x4e71) instruction because it executes in one
+	 * cycle not three and doesn't allow for an arbitary delay waiting
+	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
+	 * stall waiting for the register to become valid if such is added
+	 * to the coldfire at some stage.
+	 */
+	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
+				"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#else
+	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ *	Ideally we use a 32*32->64 multiply to calculate the number of
+ *	loop iterations, but the older standard 68k and ColdFire do not
+ *	have this instruction. So for them we have a clsoe approximation
+ *	loop using 32*32->32 multiplies only. This calculation based on
+ *	the ARM version of delay.
+ *
+ *	We want to implement:
+ *
+ *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+extern __inline__ void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+    defined(CONFIG_COLDFIRE)
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+	unsigned long tmp;
+
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	__asm__ ("mulul %2,%0:%1"
+		: "=d" (usecs), "=d" (tmp)
+		: "d" (usecs), "1" (loops_per_jiffy*HZ));
+	__delay(usecs);
+#endif
+}
+
+/*
+ *	Moved the udelay() function into library code, no longer inlined.
+ *	I had to change the algorithm because we are overflowing now on
+ *	the faster ColdFire parts. The code is a little biger, so it makes
+ *	sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/include/asm-m68knommu/div64.h b/include/asm-m68knommu/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-m68knommu/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-m68knommu/dma-mapping.h b/include/asm-m68knommu/dma-mapping.h
new file mode 100644
index 000000000000..a6c42ba48da6
--- /dev/null
+++ b/include/asm-m68knommu/dma-mapping.h
@@ -0,0 +1,10 @@
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#endif
+
+#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h
new file mode 100644
index 000000000000..43e98c96a5c2
--- /dev/null
+++ b/include/asm-m68knommu/dma.h
@@ -0,0 +1,492 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+ 
+//#define	DMA_DEBUG	1
+
+#include <linux/config.h>
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */     
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01  
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06 
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01  
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10  
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60  
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/* 
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit 
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device 
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+    
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+  
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+  
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+ 
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+   occurrence should be flagged as an error.  */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _M68K_DMA_H */
diff --git a/include/asm-m68knommu/elf.h b/include/asm-m68knommu/elf.h
new file mode 100644
index 000000000000..9919487703bc
--- /dev/null
+++ b/include/asm-m68knommu/elf.h
@@ -0,0 +1,113 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE  0
+#define R_68K_32    1
+#define R_68K_16    2
+#define R_68K_8     3
+#define R_68K_PC32  4
+#define R_68K_PC16  5
+#define R_68K_PC8   6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8  9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8  15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O 18
+#define R_68K_COPY  19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	/* Bleech. */							\
+	pr_reg[0] = regs->d1;						\
+	pr_reg[1] = regs->d2;						\
+	pr_reg[2] = regs->d3;						\
+	pr_reg[3] = regs->d4;						\
+	pr_reg[4] = regs->d5;						\
+	pr_reg[7] = regs->a0;						\
+	pr_reg[8] = regs->a1;						\
+	pr_reg[14] = regs->d0;						\
+	pr_reg[15] = rdusp();						\
+	pr_reg[16] = 0 /* regs->orig_d0 */;				\
+	pr_reg[17] = regs->sr;						\
+	pr_reg[18] = regs->pc;						\
+	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
+	{								\
+	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
+	  pr_reg[5] = sw->d6;						\
+	  pr_reg[6] = sw->d7;						\
+	  pr_reg[10] = sw->a3;						\
+	  pr_reg[11] = sw->a4;						\
+	  pr_reg[12] = sw->a5;						\
+	  pr_reg[13] = sw->a6;						\
+	}
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif
diff --git a/include/asm-m68knommu/elia.h b/include/asm-m68knommu/elia.h
new file mode 100644
index 000000000000..f18b8e9d8c36
--- /dev/null
+++ b/include/asm-m68knommu/elia.h
@@ -0,0 +1,42 @@
+/****************************************************************************/
+
+/*
+ *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	elia_h
+#define	elia_h
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ *	The serial port DTR and DCD lines are also on the Parallel I/O
+ *	as well, so define those too.
+ */
+
+#define	eLIA_DCD1		0x0001
+#define	eLIA_DCD0		0x0002
+#define	eLIA_DTR1		0x0004
+#define	eLIA_DTR0		0x0008
+
+#define	eLIA_PCIRESET		0x0020
+
+/*
+ *	Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short	ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif	/* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif	/* elia_h */
diff --git a/include/asm-m68knommu/entry.h b/include/asm-m68knommu/entry.h
new file mode 100644
index 000000000000..06f5aa70b0b5
--- /dev/null
+++ b/include/asm-m68knommu/entry.h
@@ -0,0 +1,183 @@
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - [ sr              ] [ format & vector ]
+ *	2E(sp) - [ pc-hiword       ] [ sr              ]
+ *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *	32(sp) - [ format & vector ] [ pc-loword       ]
+ *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *			M68K		  COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(2)		/* from user? */
+	bnes	6f			/* no, skip */
+	movel	%sp,sw_usp		/* save user sp */
+	addql	#8,sw_usp		/* remove exception */
+	movel	sw_ksp,%sp		/* kernel sp */
+	subql	#8,%sp			/* room for exception */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	movel	sw_usp,%a0		/* get usp */
+	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	bra	7f
+	6:
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	7:
+.endm
+
+.macro RESTORE_ALL
+	btst	#5,%sp@(PT_SR)		/* going user? */
+	bnes	8f			/* no, skip */
+	move	#0x2700,%sr		/* disable intrs */
+	movel	sw_usp,%a0		/* get usp */
+	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	addql	#8,%sp			/* remove exception */
+	movel	%sp,sw_ksp		/* save ksp */
+	subql	#8,sw_usp		/* set exception */
+	movel	sw_usp,%sp		/* restore usp */
+	rte
+	8:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	lea	%sp@(-24),%sp		/* 6 regs */
+	moveml	%a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@,%a3-%a6/%d6-%d7
+	lea	%sp@(24),%sp		/* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+	moveml	%sp@+,%a0-%a2/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/include/asm-m68knommu/errno.h b/include/asm-m68knommu/errno.h
new file mode 100644
index 000000000000..7e8c22b9a5e6
--- /dev/null
+++ b/include/asm-m68knommu/errno.h
@@ -0,0 +1 @@
+#include <asm-m68k/errno.h>
diff --git a/include/asm-m68knommu/fcntl.h b/include/asm-m68knommu/fcntl.h
new file mode 100644
index 000000000000..f6a552cda4cd
--- /dev/null
+++ b/include/asm-m68knommu/fcntl.h
@@ -0,0 +1 @@
+#include <asm-m68k/fcntl.h>
diff --git a/include/asm-m68knommu/flat.h b/include/asm-m68knommu/flat.h
new file mode 100644
index 000000000000..2d836edc4344
--- /dev/null
+++ b/include/asm-m68knommu/flat.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+
+#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/include/asm-m68knommu/fpu.h b/include/asm-m68knommu/fpu.h
new file mode 100644
index 000000000000..225082991a03
--- /dev/null
+++ b/include/asm-m68knommu/fpu.h
@@ -0,0 +1,22 @@
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+#include <linux/config.h>
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/include/asm-m68knommu/hardirq.h b/include/asm-m68knommu/hardirq.h
new file mode 100644
index 000000000000..e8659e739a64
--- /dev/null
+++ b/include/asm-m68knommu/hardirq.h
@@ -0,0 +1,25 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __M68K_HARDIRQ_H */
diff --git a/include/asm-m68knommu/hdreg.h b/include/asm-m68knommu/hdreg.h
new file mode 100644
index 000000000000..5cdd9b084d37
--- /dev/null
+++ b/include/asm-m68knommu/hdreg.h
@@ -0,0 +1 @@
+#include <asm-m68k/hdreg.h>
diff --git a/include/asm-m68knommu/hwtest.h b/include/asm-m68knommu/hwtest.h
new file mode 100644
index 000000000000..700626a1b1bf
--- /dev/null
+++ b/include/asm-m68knommu/hwtest.h
@@ -0,0 +1 @@
+#include <asm-m68k/hwtest.h>
diff --git a/include/asm-m68knommu/ide.h b/include/asm-m68knommu/ide.h
new file mode 100644
index 000000000000..b1cbf8bb9232
--- /dev/null
+++ b/include/asm-m68knommu/ide.h
@@ -0,0 +1,444 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-m68knommu/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ *	Copyright (C) 2001       Lineo Inc., davidm@uclinux.org
+ */
+/****************************************************************************/
+#ifndef _M68KNOMMU_IDE_H
+#define _M68KNOMMU_IDE_H
+
+#ifdef __KERNEL__
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/****************************************************************************/
+/*
+ *	some coldfire specifics
+ */
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ *	Save some space,  only have 1 interface
+ */
+#define MAX_HWIFS		  1	/* we only have one interface for now */
+
+#ifdef CONFIG_SECUREEDGEMP3
+#define	MCFSIM_LOCALCS	  MCFSIM_CSCR4
+#else
+#define	MCFSIM_LOCALCS	  MCFSIM_CSCR6
+#endif
+
+#endif /* CONFIG_COLDFIRE */
+
+/****************************************************************************/
+/*
+ *	Fix up things that may not have been provided
+ */
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4	/* same as the other archs */
+#endif
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+/* this definition is used only on startup .. */
+#undef HD_DATA
+#define HD_DATA NULL
+
+#define	DBGIDE(fmt,a...)
+// #define	DBGIDE(fmt,a...) printk(fmt, ##a)
+#define IDE_INLINE __inline__
+// #define IDE_INLINE
+
+/****************************************************************************/
+
+typedef union {
+	unsigned all			: 8;	/* all of the bits together */
+	struct {
+		unsigned bit7		: 1;	/* always 1 */
+		unsigned lba		: 1;	/* using LBA instead of CHS */
+		unsigned bit5		: 1;	/* always 1 */
+		unsigned unit		: 1;	/* drive select number, 0 or 1 */
+		unsigned head		: 4;	/* always zeros here */
+	} b;
+} select_t;
+
+/*
+ *	our list of ports/irq's for different boards
+ */
+
+static struct m68k_ide_defaults {
+	ide_ioreg_t	base;
+	int			irq;
+} m68k_ide_defaults[MAX_HWIFS] = {
+#if defined(CONFIG_SECUREEDGEMP3)
+	{ ((ide_ioreg_t)0x30800000), 29 },
+#elif defined(CONFIG_eLIA)
+	{ ((ide_ioreg_t)0x30c00000), 29 },
+#else
+	{ ((ide_ioreg_t)0x0), 0 }
+#endif
+};
+
+/****************************************************************************/
+
+static IDE_INLINE int ide_default_irq(ide_ioreg_t base)
+{
+	int i;
+
+	for (i = 0; i < MAX_HWIFS; i++)
+		if (m68k_ide_defaults[i].base == base)
+			return(m68k_ide_defaults[i].irq);
+	return 0;
+}
+
+static IDE_INLINE ide_ioreg_t ide_default_io_base(int index)
+{
+	if (index >= 0 && index < MAX_HWIFS)
+		return(m68k_ide_defaults[index].base);
+	return 0;
+}
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static IDE_INLINE void ide_init_hwif_ports(
+	hw_regs_t *hw,
+	ide_ioreg_t data_port,
+	ide_ioreg_t ctrl_port,
+	int *irq)
+{
+	ide_ioreg_t reg = data_port;
+	int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+		hw->io_ports[i] = reg;
+		reg += 1;
+	}
+	if (ctrl_port) {
+		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+	} else {
+		hw->io_ports[IDE_CONTROL_OFFSET] = data_port + 0xe;
+	}
+}
+
+#define ide_init_default_irq(base)	ide_default_irq(base)
+
+static IDE_INLINE int
+ide_request_irq(
+	unsigned int irq,
+	void (*handler)(int, void *, struct pt_regs *),
+	unsigned long flags,
+	const char *device,
+	void *dev_id)
+{
+#ifdef CONFIG_COLDFIRE
+	mcf_autovector(irq);
+#endif
+	return(request_irq(irq, handler, flags, device, dev_id));
+}
+
+
+static IDE_INLINE void
+ide_free_irq(unsigned int irq, void *dev_id)
+{
+	free_irq(irq, dev_id);
+}
+
+
+static IDE_INLINE int
+ide_check_region(ide_ioreg_t from, unsigned int extent)
+{
+	return 0;
+}
+
+
+static IDE_INLINE void
+ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
+{
+}
+
+
+static IDE_INLINE void
+ide_release_region(ide_ioreg_t from, unsigned int extent)
+{
+}
+
+
+static IDE_INLINE void
+ide_fix_driveid(struct hd_driveid *id)
+{
+#ifdef CONFIG_COLDFIRE
+	int i, n;
+	unsigned short *wp = (unsigned short *) id;
+	int avoid[] = {49, 51, 52, 59, -1 }; /* do not swap these words */
+
+	/* Need to byte swap shorts,  but not char fields */
+	for (i = n = 0; i < sizeof(*id) / sizeof(*wp); i++, wp++) {
+		if (avoid[n] == i) {
+			n++;
+			continue;
+		}
+		*wp = ((*wp & 0xff) << 8) | ((*wp >> 8) & 0xff);
+	}
+	/* have to word swap the one 32 bit field */
+	id->lba_capacity = ((id->lba_capacity & 0xffff) << 16) |
+				((id->lba_capacity >> 16) & 0xffff);
+#endif
+}
+
+
+static IDE_INLINE void
+ide_release_lock (int *ide_lock)
+{
+}
+
+
+static IDE_INLINE void
+ide_get_lock(
+	int *ide_lock,
+	void (*handler)(int, void *, struct pt_regs *),
+	void *data)
+{
+}
+
+
+#define ide_ack_intr(hwif) \
+	((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
+#define	ide__sti()	__sti()
+
+/****************************************************************************/
+/*
+ *	System specific IO requirements
+ */
+
+#ifdef CONFIG_COLDFIRE
+
+#ifdef CONFIG_SECUREEDGEMP3
+
+/* Replace standard IO functions for funky mapping of MP3 board */
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+
+#define outb(v, a)          ide_outb(v, (unsigned long) (a))
+#define outb_p(v, a)        ide_outb(v, (unsigned long) (a))
+#define inb(a)              ide_inb((unsigned long) (a))
+#define inb_p(a)            ide_inb((unsigned long) (a))
+
+#define ADDR8_PTR(addr)		(((addr) & 0x1) ? (0x8000 + (addr) - 1) : (addr))
+#define ADDR16_PTR(addr)	(addr)
+#define ADDR32_PTR(addr)	(addr)
+#define SWAP8(w)			((((w) & 0xffff) << 8) | (((w) & 0xffff) >> 8))
+#define SWAP16(w)			(w)
+#define SWAP32(w)			(w)
+
+
+static IDE_INLINE void
+ide_outb(unsigned int val, unsigned int addr)
+{
+	volatile unsigned short	*rp;
+
+	DBGIDE("%s(val=%x,addr=%x)\n", __FUNCTION__, val, addr);
+	rp = (volatile unsigned short *) ADDR8_PTR(addr);
+	*rp = SWAP8(val);
+}
+
+
+static IDE_INLINE int
+ide_inb(unsigned int addr)
+{
+	volatile unsigned short	*rp, val;
+
+	DBGIDE("%s(addr=%x)\n", __FUNCTION__, addr);
+	rp = (volatile unsigned short *) ADDR8_PTR(addr);
+	val = *rp;
+	return(SWAP8(val));
+}
+
+
+static IDE_INLINE void
+ide_outw(unsigned int val, unsigned int addr)
+{
+	volatile unsigned short	*rp;
+
+	DBGIDE("%s(val=%x,addr=%x)\n", __FUNCTION__, val, addr);
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	*rp = SWAP16(val);
+}
+
+static IDE_INLINE void
+ide_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp, val;
+	unsigned short   	*buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = SWAP16(val);
+	}
+}
+
+static IDE_INLINE int
+ide_inw(unsigned int addr)
+{
+	volatile unsigned short *rp, val;
+
+	DBGIDE("%s(addr=%x)\n", __FUNCTION__, addr);
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	val = *rp;
+	return(SWAP16(val));
+}
+
+static IDE_INLINE void
+ide_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short *rp;
+	unsigned short          w, *buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = SWAP16(w);
+	}
+}
+
+static IDE_INLINE void
+ide_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long *rp;
+	unsigned long          w, *buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) ADDR32_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = SWAP32(w);
+	}
+}
+
+static IDE_INLINE void
+ide_outsl(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp, val;
+	unsigned long   	*buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) ADDR32_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = SWAP32(val);
+	}
+}
+
+#elif CONFIG_eLIA
+
+/* 8/16 bit acesses are controlled by flicking bits in the CS register */
+#define	ACCESS_MODE_16BIT()	\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_LOCALCS)) = 0x0080
+#define	ACCESS_MODE_8BIT()	\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_LOCALCS)) = 0x0040
+
+
+static IDE_INLINE void
+ide_outw(unsigned int val, unsigned int addr)
+{
+	ACCESS_MODE_16BIT();
+	outw(val, addr);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	outsw(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE int
+ide_inw(unsigned int addr)
+{
+	int ret;
+
+	ACCESS_MODE_16BIT();
+	ret = inw(addr);
+	ACCESS_MODE_8BIT();
+	return(ret);
+}
+
+static IDE_INLINE void
+ide_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	insw(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	insl(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_outsl(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	outsl(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+#endif /* CONFIG_SECUREEDGEMP3 */
+
+#undef outw
+#undef outw_p
+#undef outsw
+#undef inw
+#undef inw_p
+#undef insw
+#undef insl
+#undef outsl
+
+#define	outw(v, a)	     ide_outw(v, (unsigned long) (a))
+#define	outw_p(v, a)     ide_outw(v, (unsigned long) (a))
+#define outsw(a, b, n)   ide_outsw((unsigned long) (a), b, n)
+#define	inw(a)	         ide_inw((unsigned long) (a))
+#define	inw_p(a)	     ide_inw((unsigned long) (a))
+#define insw(a, b, n)    ide_insw((unsigned long) (a), b, n)
+#define insl(a, b, n)    ide_insl((unsigned long) (a), b, n)
+#define outsl(a, b, n)   ide_outsl((unsigned long) (a), b, n)
+
+#endif CONFIG_COLDFIRE
+
+/****************************************************************************/
+#endif /* __KERNEL__ */
+#endif /* _M68KNOMMU_IDE_H */
+/****************************************************************************/
diff --git a/include/asm-m68knommu/io.h b/include/asm-m68knommu/io.h
new file mode 100644
index 000000000000..30fade4149b8
--- /dev/null
+++ b/include/asm-m68knommu/io.h
@@ -0,0 +1,203 @@
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+extern inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define mm_ptov(vaddr)		((void *) (vaddr))
+#define mm_vtop(vaddr)		((unsigned long) (vaddr))
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
diff --git a/include/asm-m68knommu/ioctl.h b/include/asm-m68knommu/ioctl.h
new file mode 100644
index 000000000000..cff72f33350f
--- /dev/null
+++ b/include/asm-m68knommu/ioctl.h
@@ -0,0 +1 @@
+#include <asm-m68k/ioctl.h>
diff --git a/include/asm-m68knommu/ioctls.h b/include/asm-m68knommu/ioctls.h
new file mode 100644
index 000000000000..0b1eb4d85059
--- /dev/null
+++ b/include/asm-m68knommu/ioctls.h
@@ -0,0 +1 @@
+#include <asm-m68k/ioctls.h>
diff --git a/include/asm-m68knommu/ipc.h b/include/asm-m68knommu/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-m68knommu/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-m68knommu/ipcbuf.h b/include/asm-m68knommu/ipcbuf.h
new file mode 100644
index 000000000000..e4a7be6dd706
--- /dev/null
+++ b/include/asm-m68knommu/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/ipcbuf.h>
diff --git a/include/asm-m68knommu/irq.h b/include/asm-m68knommu/irq.h
new file mode 100644
index 000000000000..208ccd969e4b
--- /dev/null
+++ b/include/asm-m68knommu/irq.h
@@ -0,0 +1,128 @@
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define	SYS_IRQS	256
+#define	NR_IRQS		SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS 8
+#define NR_IRQS (24+SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ1		(1)	/* level 1 interrupt */
+#define IRQ2		(2)	/* level 2 interrupt */
+#define IRQ3		(3)	/* level 3 interrupt */
+#define IRQ4		(4)	/* level 4 interrupt */
+#define IRQ5		(5)	/* level 5 interrupt */
+#define IRQ6		(6)	/* level 6 interrupt */
+#define IRQ7		(7)	/* level 7 interrupt (non-maskable) */
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time. 
+ *                                                      01/11/97 - Jes
+ */
+
+extern void (*mach_enable_irq)(unsigned int);
+extern void (*mach_disable_irq)(unsigned int);
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
+ * are your friends.
+ */
+#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
+#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
+#define IRQ_FLG_FAST	(0x0004)
+#define IRQ_FLG_SLOW	(0x0008)
+#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT    IRQ4
+
+/* see MC68360 User's Manual, p. 7-377  */
+#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+	struct irq_node *next;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+typedef struct irq_handler {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+} irq_handler_t;
+
+/* count of spurious interrupts */
+extern volatile unsigned int num_spurious;
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+/*
+ * Some drivers want these entry points
+ */
+#define enable_irq(x)	(mach_enable_irq  ? (*mach_enable_irq)(x)  : 0)
+#define disable_irq(x)	(mach_disable_irq ? (*mach_disable_irq)(x) : 0)
+
+#define enable_irq_nosync(x)	enable_irq(x)
+#define disable_irq_nosync(x)	disable_irq(x)
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/include/asm-m68knommu/kmap_types.h b/include/asm-m68knommu/kmap_types.h
new file mode 100644
index 000000000000..bfb6707575d1
--- /dev/null
+++ b/include/asm-m68knommu/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-m68knommu/linkage.h b/include/asm-m68knommu/linkage.h
new file mode 100644
index 000000000000..c288a19ff489
--- /dev/null
+++ b/include/asm-m68knommu/linkage.h
@@ -0,0 +1 @@
+#include <asm-m68k/linkage.h>
diff --git a/include/asm-m68knommu/local.h b/include/asm-m68knommu/local.h
new file mode 100644
index 000000000000..84a39c1b86f8
--- /dev/null
+++ b/include/asm-m68knommu/local.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_LOCAL_H
+#define __M68KNOMMU_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/include/asm-m68knommu/m5206sim.h b/include/asm-m68knommu/m5206sim.h
new file mode 100644
index 000000000000..d1e7509021c5
--- /dev/null
+++ b/include/asm-m68knommu/m5206sim.h
@@ -0,0 +1,132 @@
+/****************************************************************************/
+
+/*
+ *	m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5206sim_h
+#define	m5206sim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5206 SIM register set addresses.
+ */
+#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
+#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
+#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
+#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
+#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
+
+#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
+
+#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
+
+#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
+#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
+#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
+#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
+#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
+#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
+#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
+#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
+#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
+#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
+#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
+#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
+#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
+#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
+#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
+#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
+#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
+#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
+#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
+#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
+#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
+#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
+#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
+#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
+#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
+#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
+#define	MCFSIM_DMCR		0xc6		/* Default control */
+
+#ifdef CONFIG_M5206e
+#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
+#else
+#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
+#endif
+
+#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
+                                                /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
+                                                /* Clear to select T0 output */
+#endif
+
+/*
+ *	Some symbol defines for the Interrupt Control Register
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define	mcf_getipr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif	/* m5206sim_h */
diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
new file mode 100644
index 000000000000..9344f529bd8f
--- /dev/null
+++ b/include/asm-m68knommu/m5249sim.h
@@ -0,0 +1,209 @@
+/****************************************************************************/
+
+/*
+ *	m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m5249sim_h
+#define	m5249sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5249 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
+#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+
+#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
+#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
+#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
+
+#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
+#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
+#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
+#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
+#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
+#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
+#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
+#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
+
+#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
+
+#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
+#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
+
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to base at 128.
+	 */
+	moveb	#0x80,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#ifdef CONFIG_CLOCK_140MHz
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif	/* m5249sim_h */
diff --git a/include/asm-m68knommu/m5272sim.h b/include/asm-m68knommu/m5272sim.h
new file mode 100644
index 000000000000..b40875362f46
--- /dev/null
+++ b/include/asm-m68knommu/m5272sim.h
@@ -0,0 +1,79 @@
+/****************************************************************************/
+
+/*
+ *	m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5272sim_h
+#define	m5272sim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5272 SIM register set addresses.
+ */
+#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
+#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
+#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
+#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
+#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
+
+#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
+#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
+#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
+
+#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
+#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
+#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
+#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
+
+#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
+#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
+#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
+#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
+#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
+#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
+#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
+#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
+#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
+#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
+#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
+#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
+#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
+#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
+#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
+#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
+
+#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
+#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
+#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
+#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif	/* m5272sim_h */
diff --git a/include/asm-m68knommu/m527xsim.h b/include/asm-m68knommu/m527xsim.h
new file mode 100644
index 000000000000..d280d013da03
--- /dev/null
+++ b/include/asm-m68knommu/m527xsim.h
@@ -0,0 +1,58 @@
+/****************************************************************************/
+
+/*
+ *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m527xsim_h
+#define	m527xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5270/5271 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271EVB
+#define	MCFSIM_DCR		0x40		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#else
+#define	MCFSIM_DMR		0x40		/* SDRAM mode */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
+#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
+#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
+#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
+#endif
+
+/****************************************************************************/
+#endif	/* m527xsim_h */
diff --git a/include/asm-m68knommu/m528xsim.h b/include/asm-m68knommu/m528xsim.h
new file mode 100644
index 000000000000..371993a206ac
--- /dev/null
+++ b/include/asm-m68knommu/m528xsim.h
@@ -0,0 +1,45 @@
+/****************************************************************************/
+
+/*
+ *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m528xsim_h
+#define	m528xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5280/5282 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif	/* m528xsim_h */
diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h
new file mode 100644
index 000000000000..d3ce550f6ef4
--- /dev/null
+++ b/include/asm-m68knommu/m5307sim.h
@@ -0,0 +1,181 @@
+/****************************************************************************/
+
+/*
+ *	m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *	(C) Copyright 1999,  Lineo (www.lineo.com)
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5307sim_h
+#define	m5307sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5307 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7  -- old mask 5307 */
+
+#define	MCF5307_CS2		(0x400000)
+#define	MCF5307_CS3		(0x600000)
+#define	MCF5307_CS4		(0x800000)
+#define	MCF5307_CS5		(0xA00000)
+#define	MCF5307_CS6		(0xC00000)
+#define	MCF5307_CS7		(0xE00000)
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/****************************************************************************/
+#endif	/* m5307sim_h */
diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h
new file mode 100644
index 000000000000..75dcdacdb298
--- /dev/null
+++ b/include/asm-m68knommu/m5407sim.h
@@ -0,0 +1,157 @@
+/****************************************************************************/
+
+/*
+ *	m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ *	(C) Copyright 2000,  Lineo (www.lineo.com)
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5407sim_h
+#define	m5407sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5407 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_DEC		0x80000000	/* Enable data cache */
+#define	CACR_DWP		0x40000000	/* Data write protection */
+#define	CACR_DESB		0x20000000	/* Enable data store buffer */
+#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
+#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
+#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
+#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
+#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
+#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
+#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
+#define	CACR_BEC		0x00080000	/* Enable branch cache */
+#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
+#define	CACR_IEC		0x00008000	/* Enable instruction cache */
+#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
+#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
+#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
+#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
+#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
+
+#define	ACR_BASE_POS		24		/* Address Base */
+#define	ACR_MASK_POS		16		/* Address Mask */
+#define	ACR_ENABLE		0x00008000	/* Enable address */
+#define	ACR_USER		0x00000000	/* User mode access only */
+#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
+#define	ACR_ANY			0x00004000	/* Match any access mode */
+#define	ACR_CM_WT		0x00000000	/* Write through mode */
+#define	ACR_CM_CP		0x00000020	/* Copyback mode */
+#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
+#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
+#define	ACR_WPROTECT		0x00000004	/* Write protect */
+
+/****************************************************************************/
+#endif	/* m5407sim_h */
diff --git a/include/asm-m68knommu/m68360.h b/include/asm-m68knommu/m68360.h
new file mode 100644
index 000000000000..dd11b070884b
--- /dev/null
+++ b/include/asm-m68knommu/m68360.h
@@ -0,0 +1,5 @@
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
diff --git a/include/asm-m68knommu/m68360_enet.h b/include/asm-m68knommu/m68360_enet.h
new file mode 100644
index 000000000000..c36f4d059203
--- /dev/null
+++ b/include/asm-m68knommu/m68360_enet.h
@@ -0,0 +1,177 @@
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R     0x8000          /* ready bit */
+#define E_T_PAD 0x4000          /* short frame padding */
+#define T_W     0x2000          /* wrap bit */
+#define T_I     0x1000          /* interrupt on completion */
+#define T_L     0x0800          /* last in frame */
+#define T_TC    0x0400          /* transmit CRC (when last) */
+
+#define T_DEF   0x0200          /* defer indication */
+#define T_HB    0x0100          /* heartbeat */
+#define T_LC    0x0080          /* error: late collision */
+#define T_RL    0x0040          /* error: retransmission limit */
+#define T_RC    0x003c          /* retry count */
+#define T_UN    0x0002          /* error: underrun */
+#define T_CSL   0x0001          /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E     0x8000          /* buffer empty */
+#define R_W     0x2000          /* wrap bit */
+#define R_I     0x1000          /* interrupt on reception */
+#define R_L     0x0800          /* last BD in frame */
+#define R_F     0x0400          /* first BD in frame */
+#define R_M     0x0100          /* received because of promisc. mode */
+
+#define R_LG    0x0020          /* frame too long */
+#define R_NO    0x0010          /* non-octet aligned */
+#define R_SH    0x0008          /* short frame */
+#define R_CR    0x0004          /* receive CRC error */
+#define R_OV    0x0002          /* receive overrun */
+#define R_CL    0x0001          /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA    0x0080  /* graceful stop complete */
+#define ETHERNET_TXE    0x0010  /* transmit error         */
+#define ETHERNET_RXF    0x0008  /* receive frame          */
+#define ETHERNET_BSY    0x0004  /* busy condition         */
+#define ETHERNET_TXB    0x0002  /* transmit buffer        */
+#define ETHERNET_RXB    0x0001  /* receive buffer         */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC       0x8000    /* heartbeat checking      */
+#define ETHER_FC        0x4000    /* force collision         */
+#define ETHER_RSH       0x2000    /* receive short frames    */
+#define ETHER_IAM       0x1000    /* individual address mode */
+#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
+#define ETHER_PRO       0x0200    /* promiscuous             */
+#define ETHER_BRO       0x0100    /* broadcast address       */
+#define ETHER_SBT       0x0080    /* stop backoff timer      */
+#define ETHER_LPB       0x0040    /* Loop Back Mode          */
+#define ETHER_SIP       0x0020    /* sample input pins       */
+#define ETHER_LCW       0x0010    /* late collision window   */
+#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
+#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
+#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
+#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
+#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
+#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
+#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
+#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4          /* Length in bytes of CRC */               
+#define C_PRES   0xffffffff /* preform 32 bit CRC */
+#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
+#define CRCEC    0x00000000
+#define ALEC     0x00000000
+#define DISFC    0x00000000
+#define PADS     0x00000000
+#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee     /* 1518 max frame size */
+#define MINFLR   0x0040     /* Minimum frame size 64 */
+#define MAXD1    0x05ee     /* Max dma count 1518 */
+#define MAXD2    0x05ee
+#define GADDR1   0x00000000 /* Clear group address */  
+#define GADDR2   0x00000000
+#define GADDR3   0x00000000    
+#define GADDR4   0x00000000    
+#define P_PER    0x00000000 /*not used */              
+#define IADDR1   0x00000000 /* Individual hash table not used */       
+#define IADDR2   0x00000000
+#define IADDR3   0x00000000    
+#define IADDR4   0x00000000            
+#define TADDR_H  0x00000000 /* clear this regs */              
+#define TADDR_M  0x00000000            
+#define TADDR_L  0x00000000            
+
+/*       SCC Parameter Ram */
+#define RFCR    0x18 /* normal operation */
+#define TFCR    0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+} ETHER_ADDR;
+
+typedef struct {
+    int        max_frame_length;
+    int        promisc_mode;
+    int        reject_broadcast;
+    ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[MAX_DATALEN];
+    unsigned char  fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void        ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int                       scc_number,
+                   alloc_routine             *alloc_buffer,
+                   free_routine              *free_buffer,
+                   store_rx_buffer_routine   *store_rx_buffer,
+                   handle_tx_error_routine   *handle_tx_error,
+                   handle_rx_error_routine   *handle_rx_error,
+                   handle_lost_error_routine *handle_lost_error,
+                   ETHER_SPECIFIC            *ether_spec);
+int  ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
diff --git a/include/asm-m68knommu/m68360_pram.h b/include/asm-m68knommu/m68360_pram.h
new file mode 100644
index 000000000000..e6088bbce93d
--- /dev/null
+++ b/include/asm-m68knommu/m68360_pram.h
@@ -0,0 +1,431 @@
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT	0x8000
+#define WRAP_SLOT	0x4000
+
+/*****************************************************************
+        Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+    /*
+     * Global Multichannel parameter RAM
+     */
+    unsigned long   mcbase;		/* Multichannel Base pointer */
+    unsigned short  qmcstate;		/* Multichannel Controller state */
+    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
+    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
+    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
+    unsigned short  grfthr;		/* Global Receive frame threshold */
+    unsigned short  grfcnt;		/* Global Receive Frame Count */
+    unsigned long   intbase;		/* Multichannel Base address */
+    unsigned long   iintptr;		/* Pointer to interrupt queue */
+    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
+
+    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
+    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
+    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
+    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
+    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+        Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
+    unsigned short  chamr;		/* Channel Mode Register */
+    unsigned long   tstate;		/* Tx Internal State */
+    unsigned long   txintr;		/* Tx Internal Data Pointer */
+    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
+    unsigned short  txcntr;		/* Tx Internal Byte Count */
+    unsigned long   tupack;		/* (Tx Temp) */
+    unsigned long   zistate;		/* Zero Insertion machine state */
+    unsigned long   tcrc;		/* Temp Transmit CRC */
+    unsigned short  intmask;		/* Channel's interrupt mask flags */
+    unsigned short  bdflags;		
+    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
+    unsigned short  mflr;		/* Max Frame Length Register */
+    unsigned long   rstate;		/* Rx Internal State */
+    unsigned long   rxintr;		/* Rx Internal Data Pointer */
+    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
+    unsigned short  rxbyc;		/* Rx Internal Byte Count */
+    unsigned long   rpack;		/* (Rx Temp) */
+    unsigned long   zdstate;		/* Zero Deletion machine state */
+    unsigned long   rcrc;		/* Temp Transmit CRC */
+    unsigned short  maxc;		/* Max_length counter */
+    unsigned short  tmp_mb;		/* Temp */
+};
+
+
+/*****************************************************************
+        HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * HDLC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   c_mask;         /* CRC constant */
+    unsigned long   c_pres;         /* CRC preset */
+    unsigned short  disfc;          /* discarded frame counter */
+    unsigned short  crcec;          /* CRC error counter */
+    unsigned short  abtsc;          /* abort sequence counter */
+    unsigned short  nmarc;          /* nonmatching address rx cnt */
+    unsigned short  retrc;          /* frame retransmission cnt */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  max_cnt;        /* maximum length counter */
+    unsigned short  rfthr;          /* received frames threshold */
+    unsigned short  rfcnt;          /* received frames count */
+    unsigned short  hmask;          /* user defined frm addr mask */
+    unsigned short  haddr1;         /* user defined frm address 1 */
+    unsigned short  haddr2;         /* user defined frm address 2 */
+    unsigned short  haddr3;         /* user defined frm address 3 */
+    unsigned short  haddr4;         /* user defined frm address 4 */
+    unsigned short  tmp;            /* temp */
+    unsigned short  tmp_mb;         /* temp */
+};
+
+
+
+/*****************************************************************
+        UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID  0x8000          /* control character is valid */
+#define CC_REJ      0x4000          /* don't store char in buffer */
+#define CC_CHAR     0x00ff          /* control character */
+
+/* UART */
+struct uart_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rx_temp;        /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * UART specific parameter RAM
+     */
+    unsigned char   RESERVED1[8];   /* Reserved area */
+    unsigned short  max_idl;        /* maximum idle characters */
+    unsigned short  idlc;           /* rx idle counter (internal) */
+    unsigned short  brkcr;          /* break count register */
+                   
+    unsigned short  parec;          /* Rx parity error counter */
+    unsigned short  frmer;          /* Rx framing error counter */
+    unsigned short  nosec;          /* Rx noise counter */
+    unsigned short  brkec;          /* Rx break character counter */
+    unsigned short  brkln;          /* Reaceive break length */
+                   
+    unsigned short  uaddr1;         /* address character 1 */
+    unsigned short  uaddr2;         /* address character 2 */
+    unsigned short  rtemp;          /* temp storage */
+    unsigned short  toseq;          /* Tx out of sequence char */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Rx control char mask */
+    unsigned short  rccr;           /* Rx control char register */
+    unsigned short  rlbc;           /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+        BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * BISYNC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   crcc;           /* CRC Constant Temp Value */
+    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
+    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
+    unsigned short  parec;          /* Receive Parity Error Counter */
+    unsigned short  bsync;          /* BISYNC SYNC Character */
+    unsigned short  bdle;           /* BISYNC DLE Character */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+        IOM2 parameter RAM
+        (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+    unsigned short  ci_data;        /* ci data */
+    unsigned short  monitor_data;   /* monitor data */
+    unsigned short  tstate;         /* transmitter state */
+    unsigned short  rstate;         /* receiver state */
+};
+
+/*****************************************************************
+        SPI/SMC parameter RAM
+        (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R       0x8000          /* Ready bit in BD */
+
+struct spi_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+};
+
+struct smc_uart_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  max_idl;        /* Maximum IDLE Characters */
+    unsigned short  idlc;           /* Temporary IDLE Counter */
+    unsigned short  brkln;          /* Last Rx Break Length */
+    unsigned short  brkec;          /* Rx Break Condition Counter */
+    unsigned short  brkcr;          /* Break Count Register (Tx) */
+    unsigned short  r_mask;         /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+    unsigned short  rbase;          /* rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  reserved[5];    /* Reserved */
+};
+
+struct idma_pram {
+    unsigned short  ibase;          /* IDMA BD Base Address */
+    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
+    unsigned long   istate;         /* IDMA internal state */
+    unsigned long   itemp;          /* IDMA temp */
+};
+
+struct ethernet_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * ETHERNET specific parameter RAM
+     */
+    unsigned long   c_pres;         /* preset CRC */
+    unsigned long   c_mask;         /* constant mask for CRC */
+    unsigned long   crcec;          /* CRC error counter */
+    unsigned long   alec;           /* alighnment error counter */
+    unsigned long   disfc;          /* discard frame counter */
+    unsigned short  pads;           /* short frame PAD characters */
+    unsigned short  ret_lim;        /* retry limit threshold */
+    unsigned short  ret_cnt;        /* retry limit counter */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  minflr;         /* minimum frame length reg */
+    unsigned short  maxd1;          /* maximum DMA1 length reg */
+    unsigned short  maxd2;          /* maximum DMA2 length reg */
+    unsigned short  maxd;           /* rx max DMA */
+    unsigned short  dma_cnt;        /* rx dma counter */
+    unsigned short  max_b;          /* max bd byte count */
+    unsigned short  gaddr1;         /* group address filter 1 */
+    unsigned short  gaddr2;         /* group address filter 2 */
+    unsigned short  gaddr3;         /* group address filter 3 */
+    unsigned short  gaddr4;         /* group address filter 4 */
+    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
+    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
+    unsigned long   tbuf0_rba0;
+    unsigned long   tbuf0_crc;
+    unsigned short  tbuf0_bcnt;
+    union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+    } paddr;
+    unsigned short  p_per;          /* persistence */
+    unsigned short  rfbd_ptr;       /* rx first bd pointer */
+    unsigned short  tfbd_ptr;       /* tx first bd pointer */
+    unsigned short  tlbd_ptr;       /* tx last bd pointer */
+    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
+    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
+    unsigned long   tbuf1_rba0;
+    unsigned long   tbuf1_crc;
+    unsigned short  tbuf1_bcnt;
+    unsigned short  tx_len;         /* tx frame length counter */
+    unsigned short  iaddr1;         /* individual address filter 1*/
+    unsigned short  iaddr2;         /* individual address filter 2*/
+    unsigned short  iaddr3;         /* individual address filter 3*/
+    unsigned short  iaddr4;         /* individual address filter 4*/
+    unsigned short  boff_cnt;       /* back-off counter */
+    unsigned short  taddr_h;        /* temp address (MSB) */
+    unsigned short  taddr_m;        /* temp address */
+    unsigned short  taddr_l;        /* temp address (LSB) */
+};
+
+struct transparent_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * TRANSPARENT specific parameter RAM
+     */
+    unsigned long   crc_p;          /* CRC Preset */
+    unsigned long   crc_c;          /* CRC constant */
+};
+
+struct timer_pram {
+    /*
+     * RISC timers parameter RAM
+     */
+    unsigned short  tm_base;        /* RISC timer table base adr */
+    unsigned short  tm_ptr;         /* RISC timer table pointer */
+    unsigned short  r_tmr;          /* RISC timer mode register */
+    unsigned short  r_tmv;          /* RISC timer valid register */
+    unsigned long   tm_cmd;         /* RISC timer cmd register */
+    unsigned long   tm_cnt;         /* RISC timer internal cnt */
+};
+
+#endif
diff --git a/include/asm-m68knommu/m68360_quicc.h b/include/asm-m68knommu/m68360_quicc.h
new file mode 100644
index 000000000000..6d40f4d18e10
--- /dev/null
+++ b/include/asm-m68knommu/m68360_quicc.h
@@ -0,0 +1,362 @@
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+    volatile unsigned short     status;
+    volatile unsigned short     length;
+    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
+};
+#else
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
+    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
+    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+	union {
+		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
+		struct user_data		u;
+	}ch_or_u;	/* multipul or user space */
+
+    /* BASE + 0xc00: PARAMETER RAM */
+	union {
+		struct scc_pram {
+			union {
+				struct hdlc_pram        h;
+				struct uart_pram        u;
+				struct bisync_pram      b;
+				struct transparent_pram t;
+				unsigned char   RESERVED66[0x70];
+			} pscc;               /* scc parameter area (protocol dependent) */
+			union {
+				struct {
+					unsigned char       RESERVED70[0x10];
+					struct spi_pram     spi;
+					unsigned char       RESERVED72[0x8];
+					struct timer_pram   timer;
+				} timer_spi;
+				struct {
+					struct idma_pram idma;
+					unsigned char       RESERVED67[0x4];
+					union {
+						struct smc_uart_pram u;
+						struct smc_trnsp_pram t;
+					} psmc;
+				} idma_smc;
+			} pothers;
+		} scc;
+		struct ethernet_pram    enet_scc;
+		struct global_multi_pram        m;
+		unsigned char   pr[0x100];
+	} pram[4];
+
+    /* reserved */
+
+    /* BASE + 0x1000: INTERNAL REGISTERS */
+    /* SIM */
+    volatile unsigned long      sim_mcr;        /* module configuration reg */
+    volatile unsigned short     sim_simtr;      /* module test register     */
+    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_avr;        /* auto vector reg          */
+    volatile unsigned char      sim_rsr;        /* reset status reg         */
+    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
+    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
+    volatile unsigned short     sim_pllcr;      /* PLL control register     */
+    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
+    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
+    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
+    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
+    volatile unsigned char      sim_sypcr;      /* system protection control*/
+    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
+    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
+    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
+    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
+    volatile unsigned char      sim_swsr;       /* software service         */
+    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
+    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
+    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
+    /* MEMC */
+    volatile unsigned long      memc_gmr;       /* Global memory register   */
+    volatile unsigned short     memc_mstat;     /* MEMC status register     */
+    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
+    volatile unsigned long      memc_br0;       /* base register 0          */
+    volatile unsigned long      memc_or0;       /* option register 0        */
+    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br1;       /* base register 1          */
+    volatile unsigned long      memc_or1;       /* option register 1        */
+    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br2;       /* base register 2          */
+    volatile unsigned long      memc_or2;       /* option register 2        */
+    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br3;       /* base register 3          */
+    volatile unsigned long      memc_or3;       /* option register 3        */
+    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br4;       /* base register 3          */
+    volatile unsigned long      memc_or4;       /* option register 3        */
+    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br5;       /* base register 3          */
+    volatile unsigned long      memc_or5;       /* option register 3        */
+    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br6;       /* base register 3          */
+    volatile unsigned long      memc_or6;       /* option register 3        */
+    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br7;       /* base register 3          */
+    volatile unsigned long      memc_or7;       /* option register 3        */
+    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
+    /* TEST */
+    volatile unsigned short     test_tstmra;    /* master shift a           */
+    volatile unsigned short     test_tstmrb;    /* master shift b           */
+    volatile unsigned short     test_tstsc;     /* shift count              */
+    volatile unsigned short     test_tstrc;     /* repetition counter       */
+    volatile unsigned short     test_creg;      /* control                  */
+    volatile unsigned short     test_dreg;      /* destributed register     */
+    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
+    /* IDMA1 */
+    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
+    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
+    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
+    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
+    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma1_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED20;     /* Reserved area            */
+    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED21;     /* Reserved area            */
+    volatile unsigned char      idma1_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
+    /* SDMA */
+    volatile unsigned char      sdma_sdsr;      /* status reg               */
+    volatile unsigned char      RESERVED23;     /* Reserved area            */
+    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
+    volatile unsigned long      sdma_sdar;      /* address reg              */
+    /* IDMA2 */
+    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
+    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
+    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma2_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED24;     /* Reserved area            */
+    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED25;     /* Reserved area            */
+    volatile unsigned char      idma2_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
+    /* Interrupt Controller */
+    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
+    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
+    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
+    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
+    /* Parallel I/O */
+    volatile unsigned short     pio_padir;      /* port A data direction reg */
+    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
+    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
+    volatile unsigned short     pio_padat;      /* port A data register     */
+    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
+    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
+    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
+    volatile unsigned short     pio_pcso;       /* port C special options   */
+    volatile unsigned short     pio_pcdat;      /* port C data register     */
+    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
+    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
+    /* Timer */
+    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
+    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
+    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
+    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
+    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
+    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
+    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
+    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
+    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
+    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
+    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
+    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
+    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
+    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
+    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
+    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
+    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
+    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
+    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
+    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
+    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
+    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
+    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
+    /* CP */
+    volatile unsigned short     cp_cr;          /* command register         */
+    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rccr;        /* main configuration reg   */
+    volatile unsigned char      RESERVED37;     /* Reserved area            */
+    volatile unsigned char      cp_rmds;        /* development support status reg */
+    volatile unsigned long      cp_rmdr;        /* development support control reg */
+    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
+    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
+    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
+    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
+    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
+    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
+    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
+    /* BRG */
+    union {
+        volatile unsigned long l;
+        struct {
+            volatile unsigned short BRGC_RESERV:14;
+            volatile unsigned short rst:1;
+            volatile unsigned short en:1;
+            volatile unsigned short extc:2;
+            volatile unsigned short atb:1;
+            volatile unsigned short cd:12;
+            volatile unsigned short div16:1;
+        } b;
+    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
+    /* SCC registers */
+    struct scc_regs {
+        union {
+            struct {
+                /* Low word. */
+                volatile unsigned short GSMR_RESERV2:1;
+                volatile unsigned short edge:2;
+                volatile unsigned short tci:1;
+                volatile unsigned short tsnc:2;
+                volatile unsigned short rinv:1;
+                volatile unsigned short tinv:1;
+                volatile unsigned short tpl:3;
+                volatile unsigned short tpp:2;
+                volatile unsigned short tend:1;
+                volatile unsigned short tdcr:2;
+                volatile unsigned short rdcr:2;
+                volatile unsigned short renc:3;
+                volatile unsigned short tenc:3;
+                volatile unsigned short diag:2;
+                volatile unsigned short enr:1;
+                volatile unsigned short ent:1;
+                volatile unsigned short mode:4;
+                /* High word. */
+                volatile unsigned short GSMR_RESERV1:14;
+                volatile unsigned short pri:1;
+                volatile unsigned short gde:1;
+                volatile unsigned short tcrc:2;
+                volatile unsigned short revd:1;
+                volatile unsigned short trx:1;
+                volatile unsigned short ttx:1;
+                volatile unsigned short cdp:1;
+                volatile unsigned short ctsp:1;
+                volatile unsigned short cds:1;
+                volatile unsigned short ctss:1;
+                volatile unsigned short tfl:1;
+                volatile unsigned short rfw:1;
+                volatile unsigned short txsy:1;
+                volatile unsigned short synl:2;
+                volatile unsigned short rtsm:1;
+                volatile unsigned short rsyn:1;
+            } b;
+            struct {
+                volatile unsigned long low;
+                volatile unsigned long high;
+            } w;
+        } scc_gsmr;                         /* SCC general mode reg         */
+        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
+        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
+        volatile unsigned short scc_todr; /* SCC transmit on demand         */
+        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
+        volatile unsigned short scc_scce;       /* SCC event reg            */
+        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
+        volatile unsigned short scc_sccm;       /* SCC mask reg             */
+        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
+        volatile unsigned char  scc_sccs;       /* SCC status reg           */
+        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
+    } scc_regs[4];
+    /* SMC */
+    struct smc_regs {
+        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
+        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
+        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
+        volatile unsigned char  smc_smce;        /* SMC event reg           */
+        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
+        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
+        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
+    } smc_regs[2];
+    /* SPI */
+    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
+    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
+    volatile unsigned char      spi_spie;       /* SPI event reg            */
+    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
+    volatile unsigned char      spi_spim;       /* SPI mask reg             */
+    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
+    volatile unsigned char      spi_spcom;      /* SPI command reg          */
+    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
+    /* PIP */
+    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
+    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
+    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
+    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
+    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
+    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
+    volatile unsigned long      pip_pbdat;      /* port b data reg          */
+    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
+    /* Serial Interface */
+    volatile unsigned long      si_simode;      /* SI mode register         */
+    volatile unsigned char      si_sigmr;       /* SI global mode register  */
+    volatile unsigned char      RESERVED55;     /* Reserved area            */
+    volatile unsigned char      si_sistr;       /* SI status register       */
+    volatile unsigned char      si_sicmr;       /* SI command register      */
+    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
+    volatile unsigned long      si_sicr;        /* SI clock routing         */
+    volatile unsigned long      si_sirp;        /* SI ram pointers          */
+    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
+    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h
new file mode 100644
index 000000000000..a3f8cc8a4a84
--- /dev/null
+++ b/include/asm-m68knommu/m68360_regs.h
@@ -0,0 +1,408 @@
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit)  x =bit 
+
+/*****************************************************************
+        Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET  0x8000
+#define CMD_OPCODE      0x0f00
+#define CMD_CHANNEL     0x00f0
+#define CMD_FLAG        0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS        0x0000
+#define INIT_RX_PARAMS          0x0100
+#define INIT_TX_PARAMS          0x0200
+#define ENTER_HUNT_MODE         0x0300
+#define STOP_TX                 0x0400
+#define GR_STOP_TX              0x0500
+#define RESTART_TX              0x0600
+#define CLOSE_RX_BD             0x0700
+#define SET_ENET_GROUP          0x0800
+#define RESET_ENET_GROUP        0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32	0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV	0x01
+#define GUN	0x02
+#define GINT	0x04
+#define IQOV	0x08
+
+
+/* Timer commands */
+#define SET_TIMER               0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID	0x8000	/* Valid interrupt entry */
+#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
+#define INTR_MASK_BITS	0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC               0x0
+#define MODE_APPLE_TALK         0x2
+#define MODE_SS7                0x3
+#define MODE_UART               0x4
+#define MODE_PROFIBUS           0x5
+#define MODE_ASYNC_HDLC         0x6
+#define MODE_V14                0x7
+#define MODE_BISYNC             0x8
+#define MODE_DDCMP              0x9
+#define MODE_MULTI_CHANNEL      0xa
+#define MODE_ETHERNET           0xc
+
+#define DIAG_NORMAL             0x0
+#define DIAG_LOCAL_LPB          0x1
+#define DIAG_AUTO_ECHO          0x2
+#define DIAG_LBP_ECHO           0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ                 0x0
+#define ENC_NRZI                0x1
+#define ENC_FM0                 0x2
+#define ENC_MANCH               0x4
+#define ENC_DIFF_MANC           0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1            0x0
+#define CLOCK_RATE_8            0x1
+#define CLOCK_RATE_16           0x2
+#define CLOCK_RATE_32           0x3
+
+#define TPP_00                  0x0
+#define TPP_10                  0x1
+#define TPP_01                  0x2
+#define TPP_11                  0x3
+
+#define TPL_NO                  0x0
+#define TPL_8                   0x1
+#define TPL_16                  0x2
+#define TPL_32                  0x3
+#define TPL_48                  0x4
+#define TPL_64                  0x5
+#define TPL_128                 0x6
+
+#define TSNC_INFINITE           0x0
+#define TSNC_14_65              0x1
+#define TSNC_4_15               0x2
+#define TSNC_3_1                0x3
+
+#define EDGE_BOTH               0x0
+#define EDGE_POS                0x1
+#define EDGE_NEG                0x2
+#define EDGE_NO                 0x3
+
+#define SYNL_NO                 0x0
+#define SYNL_4                  0x1
+#define SYNL_8                  0x2
+#define SYNL_16                 0x3
+
+#define TCRC_CCITT16            0x0
+#define TCRC_CRC16              0x1
+#define TCRC_CCITT32            0x2
+
+
+/*****************************************************************
+        TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD        0x8000  /* Transmit on demand */
+
+
+/*****************************************************************
+        CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+
+/*****************************************************************
+       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
+#define INTR_SCC1       0x40000000      /* SCC port 1 */
+#define INTR_SCC2       0x20000000      /* SCC port 2 */
+#define INTR_SCC3       0x10000000      /* SCC port 3 */
+#define INTR_SCC4       0x08000000      /* SCC port 4 */
+#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
+#define INTR_TIMER1     0x02000000      /* timer 1 */
+#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
+#define INTR_DMA1       0x00200000      /* idma 1 */
+#define INTR_DMA2       0x00100000      /* idma 2 */
+#define INTR_TIMER2     0x00040000      /* timer 2 */
+#define INTR_CP_TIMER   0x00020000      /* CP timer */
+#define INTR_PIP_STATUS 0x00010000      /* PIP status */
+#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
+#define INTR_TIMER3     0x00001000      /* timer 3 */
+#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
+#define INTR_TIMER4     0x00000080      /* timer 4 */
+#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
+#define INTR_SCP        0x00000020      /* SCP */
+#define INTR_SMC1       0x00000010      /* SMC 1 */
+#define INTR_SMC2       0x00000008      /* SMC 2 */
+#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
+#define INTR_ERR        0x00000001      /* error */
+
+
+/*****************************************************************
+        CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR		32
+#define CPMVEC_PIO_PC0		0x1f
+#define CPMVEC_SCC1		0x1e
+#define CPMVEC_SCC2		0x1d
+#define CPMVEC_SCC3		0x1c
+#define CPMVEC_SCC4		0x1b
+#define CPMVEC_PIO_PC1		0x1a
+#define CPMVEC_TIMER1		0x19
+#define CPMVEC_PIO_PC2		0x18
+#define CPMVEC_PIO_PC3		0x17
+#define CPMVEC_SDMA_CB_ERR	0x16
+#define CPMVEC_IDMA1		0x15
+#define CPMVEC_IDMA2		0x14
+#define CPMVEC_RESERVED3	0x13
+#define CPMVEC_TIMER2		0x12
+#define CPMVEC_RISCTIMER	0x11
+#define CPMVEC_RESERVED2	0x10
+#define CPMVEC_PIO_PC4		0x0f
+#define CPMVEC_PIO_PC5		0x0e
+#define CPMVEC_TIMER3		0x0c
+#define CPMVEC_PIO_PC6		0x0b
+#define CPMVEC_PIO_PC7		0x0a
+#define CPMVEC_PIO_PC8		0x09
+#define CPMVEC_RESERVED1	0x08
+#define CPMVEC_TIMER4		0x07
+#define CPMVEC_PIO_PC9		0x06
+#define CPMVEC_SPI		0x05
+#define CPMVEC_SMC1		0x04
+#define CPMVEC_SMC2		0x03
+#define CPMVEC_PIO_PC10		0x02
+#define CPMVEC_PIO_PC11		0x01
+#define CPMVEC_ERROR		0x00
+
+/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
+/* #define CPMVEC_SCC1		((ushort)0x1e) */
+/* #define CPMVEC_SCC2		((ushort)0x1d) */
+/* #define CPMVEC_SCC3		((ushort)0x1c) */
+/* #define CPMVEC_SCC4		((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
+/* #define CPMVEC_TIMER1		((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_RESERVED3	((ushort)0x13) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_RESERVED2	((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
+/* #define CPMVEC_RESERVED1	((ushort)0x08) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
+/* #define CPMVEC_SPI		((ushort)0x05) */
+/* #define CPMVEC_SMC1		((ushort)0x04) */
+/* #define CPMVEC_SMC2		((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
+/* #define CPMVEC_ERROR		((ushort)0x00) */
+
+
+/*****************************************************************
+ *        PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ * 
+ *  Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1		((ushort)0x0001)
+#define PA_TXD1		((ushort)0x0002)
+#define PA_RXD2		((ushort)0x0004)
+#define PA_TXD2		((ushort)0x0008)
+#define PA_RXD3		((ushort)0x0010)
+#define PA_TXD3		((ushort)0x0020)
+#define PA_RXD4		((ushort)0x0040)
+#define PA_TXD4		((ushort)0x0080)
+
+#define PA_CLK1		((ushort)0x0100)
+#define PA_CLK2		((ushort)0x0200)
+#define PA_CLK3		((ushort)0x0400)
+#define PA_CLK4		((ushort)0x0800)
+#define PA_CLK5		((ushort)0x1000)
+#define PA_CLK6		((ushort)0x2000)
+#define PA_CLK7		((ushort)0x4000)
+#define PA_CLK8		((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1		((ushort)0x0001)
+#define PC_RTS2		((ushort)0x0002)
+#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1		((ushort)0x0010)
+#define PC_CD1		((ushort)0x0020)
+#define PC_CTS2		((ushort)0x0040)
+#define PC_CD2		((ushort)0x0080)
+#define PC_CTS3		((ushort)0x0100)
+#define PC_CD3		((ushort)0x0200)
+#define PC_CTS4		((ushort)0x0400)
+#define PC_CD4		((ushort)0x0800)
+
+
+
+/*****************************************************************
+        chip select option register
+*****************************************************************/
+#define DTACK           0xe000
+#define ADR_MASK        0x1ffc
+#define RDWR_MASK       0x0002
+#define FC_MASK         0x0001
+
+/*****************************************************************
+        tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) {  \
+    if((bd)->status & T_W)             \
+        (bd) = TBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_TBD(bd,quicc,pram) {  \
+    if ((bd) == TBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+#define INCREASE_RBD(bd,quicc,pram) {  \
+    if((bd)->status & R_W)             \
+        (bd) = RBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_RBD(bd,quicc,pram) {  \
+    if ((bd) == RBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+
+/*****************************************************************
+        Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & T_W)                        \
+        (bd) = TBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & R_W)                        \
+        (bd) = RBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+
+#endif
diff --git a/include/asm-m68knommu/machdep.h b/include/asm-m68knommu/machdep.h
new file mode 100644
index 000000000000..5a9f9c297f79
--- /dev/null
+++ b/include/asm-m68knommu/machdep.h
@@ -0,0 +1,54 @@
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+struct pt_regs;
+struct kbd_repeat;
+struct mktime;
+struct hwclk_time;
+struct gendisk;
+struct buffer_head;
+
+extern void (*mach_sched_init) (irqreturn_t (*handler)(int, void *, struct pt_regs *));
+/* machine dependent keyboard functions */
+extern int (*mach_keyb_init) (void);
+extern int (*mach_kbdrate) (struct kbd_repeat *);
+extern void (*mach_kbd_leds) (unsigned int);
+/* machine dependent irq functions */
+extern void (*mach_init_IRQ) (void);
+extern irqreturn_t (*(*mach_default_handler)[]) (int, void *, struct pt_regs *);
+extern int (*mach_request_irq) (unsigned int irq, void (*handler)(int, void *, struct pt_regs *),
+                                unsigned long flags, const char *devname, void *dev_id);
+extern void (*mach_free_irq) (unsigned int irq, void *dev_id);
+extern void (*mach_get_model) (char *model);
+extern int (*mach_get_hardware_list) (char *buffer);
+extern int (*mach_get_irq_list) (struct seq_file *p, void *v);
+extern void (*mach_process_int) (int irq, struct pt_regs *fp);
+/* machine dependent timer functions */
+extern unsigned long (*mach_gettimeoffset)(void);
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+			   int *min, int *sec);
+extern int (*mach_hwclk)(int, struct hwclk_time*);
+extern int (*mach_set_clock_mmss)(unsigned long);
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
+extern void (*mach_hd_setup)(char *, int *);
+extern long mach_max_dma_address;
+extern void (*mach_floppy_setup)(char *, int *);
+extern void (*mach_floppy_eject)(void);
+extern void (*mach_heartbeat) (int);
+extern void (*mach_l2_flush) (int);
+extern int mach_sysrq_key;
+extern int mach_sysrq_shift_state;
+extern int mach_sysrq_shift_mask;
+extern char *mach_sysrq_xlate;
+
+extern void config_BSP(char *command, int len);
+extern void (*mach_tick)(void);
+extern void (*mach_trap_init)(void);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/include/asm-m68knommu/math-emu.h b/include/asm-m68knommu/math-emu.h
new file mode 100644
index 000000000000..7e7090517b72
--- /dev/null
+++ b/include/asm-m68knommu/math-emu.h
@@ -0,0 +1 @@
+#include <asm-m68k/math-emu.h>
diff --git a/include/asm-m68knommu/mc146818rtc.h b/include/asm-m68knommu/mc146818rtc.h
new file mode 100644
index 000000000000..907a0481a140
--- /dev/null
+++ b/include/asm-m68knommu/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/include/asm-m68knommu/mcfcache.h b/include/asm-m68knommu/mcfcache.h
new file mode 100644
index 000000000000..bdd8c53ef34c
--- /dev/null
+++ b/include/asm-m68knommu/mcfcache.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+
+/*
+ *	mcfcache.h -- ColdFire CPU cache support code
+ *
+ *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	__M68KNOMMU_MCFCACHE_H
+#define	__M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	The different ColdFire families have different cache arrangments.
+ *	Everything from a small instruction only cache, to configurable
+ *	data and/or instruction cache, to unified instruction/data, to 
+ *	harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ *	Simple version 2 core cache. These have instruction cache only,
+ *	we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	movel	#0x80000100,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M527x)
+/*
+ *	New version 2 cores have a configurable split cache arrangement.
+ *	For now I am just enabling instruction cache - but ultimately I
+ *	think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01400000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80400100,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+/*
+ *	Cache is totally broken on early 5282 silicon. So far now we
+ *	disable its cache all together.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x00000000,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ *	The version 3 core cache. Oddly enough the version 2 core 5249
+ *	has the same SDRAM and cache setup as the version 3 cores.
+ *	This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+#else
+	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
+#endif
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0xa0000200,%d0		/* enable cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M5407)
+/*
+ *	Version 4 cores have a true harvard style separate instruction
+ *	and data cache. Invalidate and enable cache, also enable write
+ *	buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01040100,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR2
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR3
+	movel	#0xb6088400,%d0		/* enable caches */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5407 */
+
+
+/****************************************************************************/
+#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/include/asm-m68knommu/mcfdma.h b/include/asm-m68knommu/mcfdma.h
new file mode 100644
index 000000000000..350c6090b5c1
--- /dev/null
+++ b/include/asm-m68knommu/mcfdma.h
@@ -0,0 +1,145 @@
+/****************************************************************************/
+
+/*
+ *	mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef	mcfdma_h
+#define	mcfdma_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
+#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ *	Define the DMA register set addresses.
+ *      Note: these are longword registers, use unsigned long as data type
+ */
+#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
+#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
+#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
+#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
+
+/*
+ *	Bit definitions for the DMA Control Register (DCR).
+ */
+#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
+#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
+#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
+#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
+#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
+#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
+#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
+#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
+#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
+#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
+#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
+#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
+#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
+#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
+#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
+#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
+#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
+#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
+#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
+#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
+#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
+#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
+#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
+#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
+#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
+
+/*
+ *	Bit definitions for the DMA Status Register (DSR).
+ */
+#define	MCFDMA_DSR_CE	        0x40		/* Config error */
+#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
+#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
+#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
+#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
+#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
+#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
+#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
+#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV       0x1000 /* Invalid Combination */
+#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */ 
+
+/****************************************************************************/
+#endif	/* mcfdma_h */
diff --git a/include/asm-m68knommu/mcfmbus.h b/include/asm-m68knommu/mcfmbus.h
new file mode 100644
index 000000000000..4762589e858a
--- /dev/null
+++ b/include/asm-m68knommu/mcfmbus.h
@@ -0,0 +1,78 @@
+/****************************************************************************/
+
+/*
+ *      mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+#include <linux/config.h>
+
+
+#define MCFMBUS_BASE		0x280
+#define MCFMBUS_IRQ_VECTOR	0x19
+#define MCFMBUS_IRQ		0x1
+#define MCFMBUS_CLK		0x3f
+#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
+#define MCFMBUS_ADDRESS		0x01
+
+
+/*
+*	Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR	0x00
+#define MCFMBUS_MFDR	0x04
+#define MCFMBUS_MBCR	0x08
+#define MCFMBUS_MBSR	0x0C
+#define MCFMBUS_MBDR	0x10
+
+
+#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
+
+/*
+*	Define bit flags in Controll Register
+*/
+
+#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
+#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
+#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
+#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
+
+/*
+*	Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
+#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
+#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
+#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
+#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
+#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
+#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
+
+/*
+*	Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK		1
+#define MBUSIOCGCLOCK		2
+#define MBUSIOCSADDR			3
+#define MBUSIOCGADDR			4
+#define MBUSIOCSSLADDR			5
+#define MBUSIOCGSLADDR			6
+#define MBUSIOCSSUBADDR			7
+#define MBUSIOCGSUBADDR			8
+
+#endif
diff --git a/include/asm-m68knommu/mcfne.h b/include/asm-m68knommu/mcfne.h
new file mode 100644
index 000000000000..045875651e4d
--- /dev/null
+++ b/include/asm-m68knommu/mcfne.h
@@ -0,0 +1,353 @@
+/****************************************************************************/
+
+/*
+ *	mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000,      Lineo (www.lineo.com)
+ *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
+ *
+ *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
+ *
+ *      Hacked support for m5206e Cadre III evaluation board
+ *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef	mcfne_h
+#define	mcfne_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Support for NE2000 clones devices in ColdFire based boards.
+ *	Not all boards address these parts the same way, some use a
+ *	direct addressing method, others use a side-band address space
+ *	to access odd address registers, some require byte swapping
+ *	others do not.
+ */
+#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
+#define	RSWAP(w)	(w)
+
+
+/*
+ *	Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_M5206) && defined(CONFIG_ARNEWSH)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0xf0
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_MOTOROLA)
+#define	NE2000_ADDR		0x40000300
+#define	NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0x1c
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30000300
+#define NE2000_IRQ_VECTOR	25
+#define NE2000_IRQ_PRIORITY	1
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_CFV240)
+#define NE2000_ADDR             0x40010000
+#define NE2000_ADDR1            0x40010001
+#define NE2000_ODDOFFSET        0x00000000
+#define NE2000_IRQ              1
+#define NE2000_IRQ_VECTOR       0x19
+#define NE2000_IRQ_PRIORITY     2
+#define NE2000_IRQ_LEVEL        1
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_MOTOROLA)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	67
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0		0x30600300
+#define NE2000_ADDR1		0x30800300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR0	27
+#define NE2000_IRQ_VECTOR1	29
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	27
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_ARNEWSH)
+#define NE2000_ADDR		0xfe600300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define NE2000_IRQ_PRIORITY	2
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ *	Side-band address space for odd address requires re-mapping
+ *	many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define	outb	ne2000_outb
+#define	inb	ne2000_inb
+#define	outb_p	ne2000_outb
+#define	inb_p	ne2000_inb
+#define	outsb	ne2000_outsb
+#define	outsw	ne2000_outsw
+#define	insb	ne2000_insb
+#define	insw	ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *	This macro converts a conventional register address into the
+ *	real memory pointer of the mapped NE2000 device.
+ *	On most NE2000 implementations on ColdFire boards the chip is
+ *	mapped in kinda funny, due to its ISA heritage.
+ */
+#ifdef CONFIG_CFV240
+#define NE2000_PTR(addr)	(NE2000_ADDR + ((addr & 0x3f) << 1) + 1)
+#define NE2000_DATA_PTR(addr)	(NE2000_ADDR + ((addr & 0x3f) << 1))
+#else
+#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define	NE2000_DATA_PTR(addr)	(addr)
+#endif
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+	NE2000_BYTE	*rp;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	*rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+	NE2000_BYTE	*rp, val;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	val = *rp;
+	return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *rp;
+		*buf++ = RSWAP(val);
+	}
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = BSWAP(w);
+	}
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = RSWAP(val);
+	}
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *buf++;
+		*rp = BSWAP(w);
+	}
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ *	Lastly the interrupt set up code...
+ *	Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_M5206) && defined(CONFIG_ARNEWSH)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_MOTOROLA)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_CFV240)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = MCFSIM_ICR_LEVEL1 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT1);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned long	*icrp;
+	volatile unsigned long	*pitr;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+	*pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+	volatile unsigned long	*icrp;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+	mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif	/* mcfne_h */
diff --git a/include/asm-m68knommu/mcfpci.h b/include/asm-m68knommu/mcfpci.h
new file mode 100644
index 000000000000..d6229047d06e
--- /dev/null
+++ b/include/asm-m68knommu/mcfpci.h
@@ -0,0 +1,120 @@
+/****************************************************************************/
+
+/*
+ *	mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpci_h
+#define	mcfpci_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+
+/*
+ *	Address regions in the PCI address space are not mapped into the
+ *	normal memory space of the ColdFire. They must be accessed via
+ *	handler routines. This is easy for I/O space (inb/outb/etc) but
+ *	needs some code changes to support ordinary memory. Interrupts
+ *	also need to be vectored through the PCI handler first, then it
+ *	will call the actual driver sub-handlers.
+ */
+
+/*
+ *	Un-define all the standard I/O access routines.
+ */
+#undef	inb
+#undef	inw
+#undef	inl
+#undef	inb_p
+#undef	inw_p
+#undef	insb
+#undef	insw
+#undef	insl
+#undef	outb
+#undef	outw
+#undef	outl
+#undef	outb_p
+#undef	outw_p
+#undef	outsb
+#undef	outsw
+#undef	outsl
+
+#undef	request_irq
+#undef	free_irq
+
+#undef	bus_to_virt
+#undef	virt_to_bus
+
+
+/*
+ *	Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define	inb	pci_inb
+#define	inw	pci_inw
+#define	inl	pci_inl
+#define	inb_p	pci_inb
+#define	inw_p	pci_inw
+#define	insb	pci_insb
+#define	insw	pci_insw
+#define	insl	pci_insl
+
+#define	outb	pci_outb
+#define	outw	pci_outw
+#define	outl	pci_outl
+#define	outb_p	pci_outb
+#define	outw_p	pci_outw
+#define	outsb	pci_outsb
+#define	outsw	pci_outsw
+#define	outsl	pci_outsl
+
+#define	request_irq	pci_request_irq
+#define	free_irq	pci_free_irq
+
+#define	virt_to_bus	pci_virt_to_bus
+#define	bus_to_virt	pci_bus_to_virt
+
+#define	CONFIG_COMEMPCI	1
+
+
+/*
+ *	Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char	pci_inb(unsigned int addr);
+unsigned short	pci_inw(unsigned int addr);
+unsigned int	pci_inl(unsigned int addr);
+void		pci_insb(void *addr, void *buf, int len);
+void		pci_insw(void *addr, void *buf, int len);
+void		pci_insl(void *addr, void *buf, int len);
+
+void		pci_outb(unsigned char val, unsigned int addr);
+void		pci_outw(unsigned short val, unsigned int addr);
+void		pci_outl(unsigned int val, unsigned int addr);
+void		pci_outsb(void *addr, void *buf, int len);
+void		pci_outsw(void *addr, void *buf, int len);
+void		pci_outsl(void *addr, void *buf, int len);
+
+int		pci_request_irq(unsigned int irq,
+			void (*handler)(int, void *, struct pt_regs *),
+			unsigned long flags,
+			const char *device,
+			void *dev_id);
+void		pci_free_irq(unsigned int irq, void *dev_id);
+
+void		*pci_bmalloc(int size);
+void		pci_bmfree(void *bmp, int len);
+void		pci_copytoshmem(unsigned long bmp, void *src, int size);
+void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long	pci_virt_to_bus(volatile void *address);
+void		*pci_bus_to_virt(unsigned long address);
+void		pci_bmcpyto(void *dst, void *src, int len);
+void		pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif	/* mcfpci_h */
diff --git a/include/asm-m68knommu/mcfpit.h b/include/asm-m68knommu/mcfpit.h
new file mode 100644
index 000000000000..4cc2e9fd6ad0
--- /dev/null
+++ b/include/asm-m68knommu/mcfpit.h
@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *	mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpit_h
+#define	mcfpit_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for the 5270/5271 and 5280/5282.
+ */
+#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
+#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
+#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
+
+
+/*
+ *	Define the PIT timer register set addresses.
+ */
+struct mcfpit {
+	unsigned short	pcsr;			/* PIT control and status */
+	unsigned short	pmr;			/* PIT modulus register */
+	unsigned short	pcntr;			/* PIT count register */
+} __attribute__((packed));
+
+/*
+ *	Bit definitions for the PIT Control and Status register.
+ */
+#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
+#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
+#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
+#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
+#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
+#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
+#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
+#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
+#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
+
+/****************************************************************************/
+#endif	/* mcfpit_h */
diff --git a/include/asm-m68knommu/mcfsim.h b/include/asm-m68knommu/mcfsim.h
new file mode 100644
index 000000000000..522e513c2bc6
--- /dev/null
+++ b/include/asm-m68knommu/mcfsim.h
@@ -0,0 +1,109 @@
+/****************************************************************************/
+
+/*
+ *	mcfsim.h -- ColdFire System Integration Module support.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsim_h
+#define	mcfsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Include 5204, 5206/e, 5249, 5270/5271, 5272, 5280/5282, 5307 or
+ *	5407 specific addresses.
+ */
+#if defined(CONFIG_M5204)
+#include <asm/m5204sim.h>
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ *	Define the base address of the SIM within the MBAR address space.
+ */
+#define	MCFSIM_BASE		0x0		/* Base address of SIM */
+
+
+/*
+ *	Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
+
+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
+#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
+#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#endif
+
+/*
+ *	Mask for all of the SIM devices. Some parts have more or less
+ *	SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ *	Definition for the interrupt auto-vectoring support.
+ */
+extern void	mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif	/* mcfsim_h */
diff --git a/include/asm-m68knommu/mcfsmc.h b/include/asm-m68knommu/mcfsmc.h
new file mode 100644
index 000000000000..2583900b9591
--- /dev/null
+++ b/include/asm-m68knommu/mcfsmc.h
@@ -0,0 +1,188 @@
+/****************************************************************************/
+
+/*
+ *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsmc_h
+#define	mcfsmc_h
+/****************************************************************************/
+
+/*
+ *	None of the current ColdFire targets that use the SMC91x111
+ *	allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+#include <linux/config.h>
+
+#undef	outb
+#undef	inb
+#undef	outw
+#undef	outwd
+#undef	inw	
+#undef	outl
+#undef	inl
+
+#undef	outsb
+#undef	outsw
+#undef	outsl
+#undef	insb
+#undef	insw
+#undef	insl
+
+/*
+ *	Re-defines for ColdFire environment... The SMC part is
+ *	mapped into memory space, so remap the PC-style in/out
+ *	routines to handle that.
+ */
+#define	outb	smc_outb
+#define	inb	smc_inb
+#define	outw	smc_outw
+#define	outwd	smc_outwd
+#define	inw	smc_inw
+#define	outl	smc_outl
+#define	inl	smc_inl
+
+#define	outsb	smc_outsb
+#define	outsw	smc_outsw
+#define	outsl	smc_outsl
+#define	insb	smc_insb
+#define	insw	smc_insw
+#define	insl	smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) (addr & ~0x1));
+	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) addr);
+	return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+	*((volatile unsigned long *) addr) = 
+		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ *	The rep* functions are used to feed the data port with
+ *	raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+
+	/* Copy as words for as long as possible */
+	for (ebuf = buf + (len >> 1); (buf < ebuf); )
+		*buf++ = *rp;
+
+	/* Lastly, handle left over byte */
+	if (len & 0x1)
+		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ *	Re-map the address space of at least one of the SMC ethernet
+ *	parts. Both parts power up decoding the same address, so we
+ *	need to move one of them first, before doing enything else.
+ *
+ *	We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+	static int		once = 0;
+	extern unsigned short	ppdata;
+	if (once++ == 0) {
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		ppdata |= 0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0067, ioaddr + BASE);
+
+		ppdata &= ~0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+	}
+	
+	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif	/* mcfsmc_h */
diff --git a/include/asm-m68knommu/mcftimer.h b/include/asm-m68knommu/mcftimer.h
new file mode 100644
index 000000000000..0f47164c33a9
--- /dev/null
+++ b/include/asm-m68knommu/mcftimer.h
@@ -0,0 +1,85 @@
+/****************************************************************************/
+
+/*
+ *	mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcftimer_h
+#define	mcftimer_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
+#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
+#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
+#endif
+
+
+/*
+ *	Define the TIMER register set addresses.
+ */
+#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
+#define	MCFTIMER_TRR		0x02		/* Timer Reference (r/w) */
+#define	MCFTIMER_TCR		0x04		/* Timer Capture reg (r/w) */
+#define	MCFTIMER_TCN		0x06		/* Timer Counter reg (r/w) */
+#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
+
+struct mcftimer {
+	unsigned short	tmr;			/* Timer Mode reg (r/w) */
+	unsigned short	reserved1;
+	unsigned short	trr;			/* Timer Reference (r/w) */
+	unsigned short	reserved2;
+	unsigned short	tcr;			/* Timer Capture reg (r/w) */
+	unsigned short	reserved3;
+	unsigned short	tcn;			/* Timer Counter reg (r/w) */
+	unsigned short	reserved4;
+	unsigned char	reserved5;
+	unsigned char	ter;			/* Timer Event reg (r/w) */
+} __attribute__((packed));
+
+/*
+ *	Bit definitions for the Timer Mode Register (TMR).
+ *	Register bit flags are common accross ColdFires.
+ */
+#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
+#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
+#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
+#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
+#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
+#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
+#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
+#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
+#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
+#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
+#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
+#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
+#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
+#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
+#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
+#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
+#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
+
+/*
+ *	Bit definitions for the Timer Event Registers (TER).
+ */
+#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
+#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
+
+/****************************************************************************/
+#endif	/* mcftimer_h */
diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
new file mode 100644
index 000000000000..54d4a85f4fdf
--- /dev/null
+++ b/include/asm-m68knommu/mcfuart.h
@@ -0,0 +1,200 @@
+/****************************************************************************/
+
+/*
+ *	mcfuart.h -- ColdFire internal UART support defines.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfuart_h
+#define	mcfuart_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the base address of the UARTS within the MBAR address
+ *	space.
+ */
+#if defined(CONFIG_M5272)
+#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#else
+#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#endif
+#endif
+
+
+/*
+ *	Define the ColdFire UART register set addresses.
+ */
+#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
+#define	MCFUART_USR		0x04		/* Status register (r) */
+#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
+#define	MCFUART_UCR		0x08		/* Command register (w) */
+#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
+#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
+#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
+#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
+#define	MCFUART_UISR		0x14		/* Interrup Status (r) */
+#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
+#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
+#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
+#ifdef	CONFIG_M5272
+#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
+#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
+#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
+#else
+#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
+#endif
+#define	MCFUART_UIPR		0x34		/* Input Port (r) */
+#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
+#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
+
+
+/*
+ *	Define bit flags in Mode Register 1 (MR1).
+ */
+#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
+#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
+#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
+#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
+#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
+
+#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
+#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
+#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
+#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
+#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
+
+#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
+#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
+#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
+#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
+
+/*
+ *	Define bit flags in Mode Register 2 (MR2).
+ */
+#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
+#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
+#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
+#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
+#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
+
+#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
+#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
+#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
+
+/*
+ *	Define bit flags in Status Register (USR).
+ */
+#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
+#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
+#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
+#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
+#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
+#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
+#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
+#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
+
+#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ *	Define bit flags in Clock Select Register (UCSR).
+ */
+#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
+#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
+#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
+
+#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
+#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
+#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
+
+/*
+ *	Define bit flags in Command Register (UCR).
+ */
+#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
+#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
+#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
+#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
+#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
+#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
+#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
+#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
+
+#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
+#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
+#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
+#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
+#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
+#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
+
+/*
+ *	Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
+#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Input Port Register (UIP).
+ */
+#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Output Port Registers (UOP).
+ *	Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
+
+/*
+ *	Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
+
+/*
+ *	Define bit flags in Interrupt Status Register (UISR).
+ *	These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
+#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
+#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
+#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
+
+#ifdef	CONFIG_M5272
+/*
+ *	Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
+#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
+#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
+
+/*
+ *	Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
+#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
+#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif	/* mcfuart_h */
diff --git a/include/asm-m68knommu/mcfwdebug.h b/include/asm-m68knommu/mcfwdebug.h
new file mode 100644
index 000000000000..c425dd568155
--- /dev/null
+++ b/include/asm-m68knommu/mcfwdebug.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+
+/*
+ *	mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+#include <linux/config.h>
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
+#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
+#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
+#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
+#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
+#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
+#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
+#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
+#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
+#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
+#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
+#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
+#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
+#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
+#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
+#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
+#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
+#define MCFDEBUG_TDR_EDLW2	0x10000000
+#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
+#define MCFDEBUG_TDR_EDWL2	0x08000000
+#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
+#define MCFDEBUG_TDR_EDWU2	0x04000000
+#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
+#define MCFDEBUG_TDR_EDLL2	0x02000000
+#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
+#define MCFDEBUG_TDR_EDLM2	0x01000000
+#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
+#define MCFDEBUG_TDR_EDUM2	0x00800000
+#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
+#define MCFDEBUG_TDR_EDUU2	0x00400000
+#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
+#define MCFDEBUG_TDR_DI2	0x00200000
+#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
+#define MCFDEBUG_TDR_EAI2	0x00100000
+#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
+#define MCFDEBUG_TDR_EAR2	0x00080000
+#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
+#define MCFDEBUG_TDR_EAL2	0x00040000
+#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
+#define MCFDEBUG_TDR_EPC2	0x00020000
+#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
+#define MCFDEBUG_TDR_PCI2	0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET	0x00100000
+#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
+#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
+#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
+#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
+#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
+#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
+#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
+#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
+#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
+#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
+#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
+#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
+#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
+#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+extern inline void wdebug(int reg, unsigned long data) {
+	unsigned short dbg_spc[6];
+	unsigned short *dbg;
+
+	// Force alignment to long word boundary
+	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+	// Build up the debug instruction
+	dbg[0] = 0x2c80 | (reg & 0xf);
+	dbg[1] = (data >> 16) & 0xffff;
+	dbg[2] = data & 0xffff;
+	dbg[3] = 0;
+
+	// Perform the wdebug instruction
+#if 0
+	// This strain is for gas which doesn't have the wdebug instructions defined
+	asm(	"move.l	%0, %%a0\n\t"
+		".word	0xfbd0\n\t"
+		".word	0x0003\n\t"
+	    :: "g" (dbg) : "a0");
+#else
+	// And this is for when it does
+	asm(	"wdebug	(%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
diff --git a/include/asm-m68knommu/md.h b/include/asm-m68knommu/md.h
new file mode 100644
index 000000000000..d810c78de5ff
--- /dev/null
+++ b/include/asm-m68knommu/md.h
@@ -0,0 +1 @@
+#include <asm-m68k/md.h>
diff --git a/include/asm-m68knommu/mman.h b/include/asm-m68knommu/mman.h
new file mode 100644
index 000000000000..4846c682efed
--- /dev/null
+++ b/include/asm-m68knommu/mman.h
@@ -0,0 +1 @@
+#include <asm-m68k/mman.h>
diff --git a/include/asm-m68knommu/mmu.h b/include/asm-m68knommu/mmu.h
new file mode 100644
index 000000000000..5fa6b68353ba
--- /dev/null
+++ b/include/asm-m68knommu/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
diff --git a/include/asm-m68knommu/mmu_context.h b/include/asm-m68knommu/mmu_context.h
new file mode 100644
index 000000000000..9bc0fd49b8aa
--- /dev/null
+++ b/include/asm-m68knommu/mmu_context.h
@@ -0,0 +1,33 @@
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+extern inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/include/asm-m68knommu/module.h b/include/asm-m68knommu/module.h
new file mode 100644
index 000000000000..57e95cc01ad5
--- /dev/null
+++ b/include/asm-m68knommu/module.h
@@ -0,0 +1 @@
+#include <asm-m68k/module.h>
diff --git a/include/asm-m68knommu/movs.h b/include/asm-m68knommu/movs.h
new file mode 100644
index 000000000000..81a16779e833
--- /dev/null
+++ b/include/asm-m68knommu/movs.h
@@ -0,0 +1 @@
+#include <asm-m68k/movs.h>
diff --git a/include/asm-m68knommu/msgbuf.h b/include/asm-m68knommu/msgbuf.h
new file mode 100644
index 000000000000..bdfadec4d52d
--- /dev/null
+++ b/include/asm-m68knommu/msgbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/msgbuf.h>
diff --git a/include/asm-m68knommu/namei.h b/include/asm-m68knommu/namei.h
new file mode 100644
index 000000000000..31a85d27b931
--- /dev/null
+++ b/include/asm-m68knommu/namei.h
@@ -0,0 +1 @@
+#include <asm-m68k/namei.h>
diff --git a/include/asm-m68knommu/nettel.h b/include/asm-m68knommu/nettel.h
new file mode 100644
index 000000000000..9bda307e6544
--- /dev/null
+++ b/include/asm-m68knommu/nettel.h
@@ -0,0 +1,109 @@
+/****************************************************************************/
+
+/*
+ *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
+ */
+
+/****************************************************************************/
+#ifndef	nettel_h
+#define	nettel_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ *	GPIO lines. Most of the LED's are driver through a latch
+ *	connected to CS2.
+ */
+#define	MCFPP_DCD1	0x0001
+#define	MCFPP_DCD0	0x0002
+#define	MCFPP_DTR1	0x0004
+#define	MCFPP_DTR0	0x0008
+
+#define	NETtel_LEDADDR	0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	ppdata = (ppdata & ~mask) | bits;
+	*pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ *	NETtel/5206e based hardware has leds on latch on CS3.
+ *	No support modem for lines??
+ */
+#define	NETtel_LEDADDR	0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define	MCFPP_DCD0	0x0080
+#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
+#define	MCFPP_DTR0	0x0040
+#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	*pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif	/* nettel_h */
diff --git a/include/asm-m68knommu/openprom.h b/include/asm-m68knommu/openprom.h
new file mode 100644
index 000000000000..fdba7953ff9f
--- /dev/null
+++ b/include/asm-m68knommu/openprom.h
@@ -0,0 +1 @@
+#include <asm-m68k/openprom.h>
diff --git a/include/asm-m68knommu/oplib.h b/include/asm-m68knommu/oplib.h
new file mode 100644
index 000000000000..ce079dc332d9
--- /dev/null
+++ b/include/asm-m68knommu/oplib.h
@@ -0,0 +1 @@
+#include <asm-m68k/oplib.h>
diff --git a/include/asm-m68knommu/page.h b/include/asm-m68knommu/page.h
new file mode 100644
index 000000000000..05e03df0ec29
--- /dev/null
+++ b/include/asm-m68knommu/page.h
@@ -0,0 +1,95 @@
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_PAGE_H */
diff --git a/include/asm-m68knommu/page_offset.h b/include/asm-m68knommu/page_offset.h
new file mode 100644
index 000000000000..2b45645e9b29
--- /dev/null
+++ b/include/asm-m68knommu/page_offset.h
@@ -0,0 +1,47 @@
+
+#include <linux/config.h>
+
+/* This handles the memory map.. */
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_SMALL)
+#define PAGE_OFFSET_RAW		0x30020000
+#elif defined(CONFIG_CFV240)
+#define PAGE_OFFSET_RAW		0x02000000
+#else
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#endif
+
+#ifdef CONFIG_M68360
+#define PAGE_OFFSET_RAW     0x00000000
+#endif
+
+#ifdef CONFIG_PILOT
+#ifdef CONFIG_M68328
+#define PAGE_OFFSET_RAW		0x10000000
+#endif
+#ifdef CONFIG_M68EZ328
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#endif
+#ifdef CONFIG_UCSIMM
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+
+#if defined(CONFIG_UCDIMM) || defined(CONFIG_DRAGEN2)
+#ifdef CONFIG_M68VZ328 
+#define PAGE_OFFSET_RAW		0x00000000
+#endif /* CONFIG_M68VZ328 */
+#endif /* CONFIG_UCDIMM */
+
+#ifdef CONFIG_M68EZ328ADS
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#ifdef CONFIG_ALMA_ANS
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#ifdef CONFIG_M68EN302
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
new file mode 100644
index 000000000000..3f57d5db81f5
--- /dev/null
+++ b/include/asm-m68knommu/param.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CLEOPATRA)
+#define	HZ 1000
+#endif
+#ifndef HZ
+#define	HZ 100
+#endif
+
+#ifdef __KERNEL__
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
diff --git a/include/asm-m68knommu/pci.h b/include/asm-m68knommu/pci.h
new file mode 100644
index 000000000000..e04c77e1184d
--- /dev/null
+++ b/include/asm-m68knommu/pci.h
@@ -0,0 +1,39 @@
+#ifndef M68KNOMMU_PCI_H
+#define	M68KNOMMU_PCI_H
+
+#include <asm-m68k/pci.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ *	These are pretty much arbitary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+/*
+ * Not supporting more than 32-bit PCI bus addresses now, but
+ * must satisfy references to this function.  Change if needed.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
diff --git a/include/asm-m68knommu/percpu.h b/include/asm-m68knommu/percpu.h
new file mode 100644
index 000000000000..5de72c327efd
--- /dev/null
+++ b/include/asm-m68knommu/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_M68KNOMMU_PERCPU__
+#define __ARCH_M68KNOMMU_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/include/asm-m68knommu/pgalloc.h b/include/asm-m68knommu/pgalloc.h
new file mode 100644
index 000000000000..d6352f671ec0
--- /dev/null
+++ b/include/asm-m68knommu/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
new file mode 100644
index 000000000000..e2a69fffa370
--- /dev/null
+++ b/include/asm-m68knommu/pgtable.h
@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/include/asm-m68knommu/poll.h b/include/asm-m68knommu/poll.h
new file mode 100644
index 000000000000..ee1b6cb549ca
--- /dev/null
+++ b/include/asm-m68knommu/poll.h
@@ -0,0 +1 @@
+#include <asm-m68k/poll.h>
diff --git a/include/asm-m68knommu/posix_types.h b/include/asm-m68knommu/posix_types.h
new file mode 100644
index 000000000000..6205fb9392a3
--- /dev/null
+++ b/include/asm-m68knommu/posix_types.h
@@ -0,0 +1 @@
+#include <asm-m68k/posix_types.h>
diff --git a/include/asm-m68knommu/processor.h b/include/asm-m68knommu/processor.h
new file mode 100644
index 000000000000..85a054e758b1
--- /dev/null
+++ b/include/asm-m68knommu/processor.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+extern inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return(sw_usp);
+#else
+  	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+extern inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+/* 
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+   
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+};
+
+#define INIT_THREAD  { \
+	sizeof(init_stack) + (unsigned long) init_stack, 0, \
+	PS_S, __KERNEL_DS, \
+	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)           \
+do {                                             \
+	set_fs(USER_DS); /* reads from user space */ \
+	(_regs)->pc = (_pc);                         \
+	if (current->mm)                             \
+		(_regs)->d5 = current->mm->start_data;   \
+	(_regs)->sr &= ~0x2000;                      \
+	wrusp(_usp);                                 \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    do { } while (0)
+
+#endif
diff --git a/include/asm-m68knommu/ptrace.h b/include/asm-m68knommu/ptrace.h
new file mode 100644
index 000000000000..f65bd90749e6
--- /dev/null
+++ b/include/asm-m68knommu/ptrace.h
@@ -0,0 +1,91 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+#ifndef NO_FORMAT_VEC
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#ifdef COFNIG_FPU
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/include/asm-m68knommu/quicc_simple.h b/include/asm-m68knommu/quicc_simple.h
new file mode 100644
index 000000000000..c3636932d4bc
--- /dev/null
+++ b/include/asm-m68knommu/quicc_simple.h
@@ -0,0 +1,52 @@
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0   0
+#define GLB_SCC_1   1
+#define GLB_SCC_2   2
+#define GLB_SCC_3   3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr; 
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short  IntrDis(void);
+void            IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
diff --git a/include/asm-m68knommu/resource.h b/include/asm-m68knommu/resource.h
new file mode 100644
index 000000000000..7fa63d5ea576
--- /dev/null
+++ b/include/asm-m68knommu/resource.h
@@ -0,0 +1 @@
+#include <asm-m68k/resource.h>
diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
new file mode 100644
index 000000000000..230b8d56d17f
--- /dev/null
+++ b/include/asm-m68knommu/scatterlist.h
@@ -0,0 +1,13 @@
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+struct scatterlist {
+	struct page	*page;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/include/asm-m68knommu/sections.h b/include/asm-m68knommu/sections.h
new file mode 100644
index 000000000000..dd0ecb98ec08
--- /dev/null
+++ b/include/asm-m68knommu/sections.h
@@ -0,0 +1,7 @@
+#ifndef _M68KNOMMU_SECTIONS_H
+#define _M68KNOMMU_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-m68knommu/segment.h b/include/asm-m68knommu/segment.h
new file mode 100644
index 000000000000..42318ebec7ec
--- /dev/null
+++ b/include/asm-m68knommu/segment.h
@@ -0,0 +1,51 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/include/asm-m68knommu/semaphore-helper.h b/include/asm-m68knommu/semaphore-helper.h
new file mode 100644
index 000000000000..a6586417c1c2
--- /dev/null
+++ b/include/asm-m68knommu/semaphore-helper.h
@@ -0,0 +1,83 @@
+#ifndef _M68K_SEMAPHORE_HELPER_H
+#define _M68K_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+#include <linux/config.h>
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc(&sem->waking);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 0;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	ret = 1;
+	if (atomic_read(&sem->waking) > 0) {
+		atomic_dec(&sem->waking);
+		ret = 0;
+	} else
+		atomic_inc(&sem->count);
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif
diff --git a/include/asm-m68knommu/semaphore.h b/include/asm-m68knommu/semaphore.h
new file mode 100644
index 000000000000..febe85add509
--- /dev/null
+++ b/include/asm-m68knommu/semaphore.h
@@ -0,0 +1,157 @@
+#ifndef _M68K_SEMAPHORE_H
+#define _M68K_SEMAPHORE_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+/*
+ * Interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+
+struct semaphore {
+	atomic_t count;
+	atomic_t waking;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.waking		= ATOMIC_INIT(0),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+extern inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits. See arch/m68k/lib/semaphore.S
+ */
+extern inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	__asm__ __volatile__(
+		"| atomic down operation\n\t"
+		"movel	%0, %%a1\n\t"
+		"lea	%%pc@(1f), %%a0\n\t"
+		"subql	#1, %%a1@\n\t"
+		"jmi __down_failed\n"
+		"1:"
+		: /* no outputs */
+		: "g" (sem)
+		: "cc", "%a0", "%a1", "memory");
+}
+
+extern inline int down_interruptible(struct semaphore * sem)
+{
+	int ret;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"| atomic down operation\n\t"
+		"movel	%1, %%a1\n\t"
+		"lea	%%pc@(1f), %%a0\n\t"
+		"subql	#1, %%a1@\n\t"
+		"jmi __down_failed_interruptible\n\t"
+		"clrl	%%d0\n"
+		"1: movel	%%d0, %0\n"
+		: "=d" (ret)
+		: "g" (sem)
+		: "cc", "%d0", "%a0", "%a1", "memory");
+	return(ret);
+}
+
+extern inline int down_trylock(struct semaphore * sem)
+{
+	register struct semaphore *sem1 __asm__ ("%a1") = sem;
+	register int result __asm__ ("%d0");
+
+	__asm__ __volatile__(
+		"| atomic down trylock operation\n\t"
+		"subql #1,%1@\n\t"
+		"jmi 2f\n\t"
+		"clrl %0\n"
+		"1:\n"
+		".section .text.lock,\"ax\"\n"
+		".even\n"
+		"2:\tpea 1b\n\t"
+		"jbra __down_failed_trylock\n"
+		".previous"
+		: "=d" (result)
+		: "a" (sem1)
+		: "memory");
+	return result;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+extern inline void up(struct semaphore * sem)
+{
+	__asm__ __volatile__(
+		"| atomic up operation\n\t"
+		"movel	%0, %%a1\n\t"
+		"lea	%%pc@(1f), %%a0\n\t"
+		"addql	#1, %%a1@\n\t"
+		"jle __up_wakeup\n"
+		"1:"
+		: /* no outputs */
+		: "g" (sem)
+		: "cc", "%a0", "%a1", "memory");
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-m68knommu/sembuf.h b/include/asm-m68knommu/sembuf.h
new file mode 100644
index 000000000000..3a634f9ecf50
--- /dev/null
+++ b/include/asm-m68knommu/sembuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/sembuf.h>
diff --git a/include/asm-m68knommu/setup.h b/include/asm-m68knommu/setup.h
new file mode 100644
index 000000000000..d2b0fcce41b2
--- /dev/null
+++ b/include/asm-m68knommu/setup.h
@@ -0,0 +1,5 @@
+#include <asm-m68k/setup.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+#define COMMAND_LINE_SIZE	512
diff --git a/include/asm-m68knommu/shm.h b/include/asm-m68knommu/shm.h
new file mode 100644
index 000000000000..cc8e522d9050
--- /dev/null
+++ b/include/asm-m68knommu/shm.h
@@ -0,0 +1 @@
+#include <asm-m68k/shm.h>
diff --git a/include/asm-m68knommu/shmbuf.h b/include/asm-m68knommu/shmbuf.h
new file mode 100644
index 000000000000..bc34cf8eefce
--- /dev/null
+++ b/include/asm-m68knommu/shmbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmbuf.h>
diff --git a/include/asm-m68knommu/shmparam.h b/include/asm-m68knommu/shmparam.h
new file mode 100644
index 000000000000..d7ee69648ebf
--- /dev/null
+++ b/include/asm-m68knommu/shmparam.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmparam.h>
diff --git a/include/asm-m68knommu/sigcontext.h b/include/asm-m68knommu/sigcontext.h
new file mode 100644
index 000000000000..84bf36dc7a83
--- /dev/null
+++ b/include/asm-m68knommu/sigcontext.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask; 	/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_d0;
+	unsigned long  sc_d1;
+	unsigned long  sc_a0;
+	unsigned long  sc_a1;
+	unsigned short sc_sr;
+	unsigned long  sc_pc;
+	unsigned short sc_formatvec;
+};
+
+#endif
diff --git a/include/asm-m68knommu/siginfo.h b/include/asm-m68knommu/siginfo.h
new file mode 100644
index 000000000000..b18e5f4064ae
--- /dev/null
+++ b/include/asm-m68knommu/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-m68knommu/signal.h b/include/asm-m68knommu/signal.h
new file mode 100644
index 000000000000..486cbb0dc088
--- /dev/null
+++ b/include/asm-m68knommu/signal.h
@@ -0,0 +1,183 @@
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/include/asm-m68knommu/smp.h b/include/asm-m68knommu/smp.h
new file mode 100644
index 000000000000..9e9bd7e58922
--- /dev/null
+++ b/include/asm-m68knommu/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/include/asm-m68knommu/socket.h b/include/asm-m68knommu/socket.h
new file mode 100644
index 000000000000..ac5478bf6371
--- /dev/null
+++ b/include/asm-m68knommu/socket.h
@@ -0,0 +1 @@
+#include <asm-m68k/socket.h>
diff --git a/include/asm-m68knommu/sockios.h b/include/asm-m68knommu/sockios.h
new file mode 100644
index 000000000000..dcc6a8900ce2
--- /dev/null
+++ b/include/asm-m68knommu/sockios.h
@@ -0,0 +1 @@
+#include <asm-m68k/sockios.h>
diff --git a/include/asm-m68knommu/spinlock.h b/include/asm-m68knommu/spinlock.h
new file mode 100644
index 000000000000..6bb1f06c4781
--- /dev/null
+++ b/include/asm-m68knommu/spinlock.h
@@ -0,0 +1 @@
+#include <asm-m68k/spinlock.h>
diff --git a/include/asm-m68knommu/stat.h b/include/asm-m68knommu/stat.h
new file mode 100644
index 000000000000..3d4b260e7c03
--- /dev/null
+++ b/include/asm-m68knommu/stat.h
@@ -0,0 +1 @@
+#include <asm-m68k/stat.h>
diff --git a/include/asm-m68knommu/statfs.h b/include/asm-m68knommu/statfs.h
new file mode 100644
index 000000000000..2ce99eaf0970
--- /dev/null
+++ b/include/asm-m68knommu/statfs.h
@@ -0,0 +1 @@
+#include <asm-m68k/statfs.h>
diff --git a/include/asm-m68knommu/string.h b/include/asm-m68knommu/string.h
new file mode 100644
index 000000000000..af09e17000fc
--- /dev/null
+++ b/include/asm-m68knommu/string.h
@@ -0,0 +1,126 @@
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+  char *xdest = dest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jne 1b"
+	: "=a" (dest), "=a" (src)
+        : "0" (dest), "1" (src) : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+  char *xdest = dest;
+
+  if (n == 0)
+    return xdest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+	"jeq 2f\n\t"
+        "subql #1,%2\n\t"
+        "jne 1b\n\t"
+        "2:"
+        : "=a" (dest), "=a" (src), "=d" (n)
+        : "0" (dest), "1" (src), "2" (n)
+        : "memory");
+  return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+  char __res;
+
+  __asm__
+       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+        "cmpb %1@+,%2\n\t"      /* compare a byte */
+        "jne  2f\n\t"           /* not equal, break out */
+        "tstb %2\n\t"           /* at end of cs? */
+        "jne  1b\n\t"           /* no, keep going */
+        "jra  3f\n\t"		/* strings are equal */
+        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
+        "3:"
+        : "=a" (cs), "=a" (ct), "=d" (__res)
+        : "0" (cs), "1" (ct));
+
+  return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+  char __res;
+
+  if (!count)
+    return 0;
+  __asm__
+       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
+        "cmpb   %1@+,%3\n\t"            /* compare a byte */
+        "jne    3f\n\t"                 /* not equal, break out */
+        "tstb   %3\n\t"                 /* at end of cs? */
+        "jeq    4f\n\t"                 /* yes, all done */
+        "subql  #1,%2\n\t"              /* no, adjust count */
+        "jne    1b\n\t"                 /* more to do, keep going */
+        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
+        "jra    4f\n\t"
+        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
+        "4:"
+        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+        : "0" (cs), "1" (ct), "2" (count));
+  return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/include/asm-m68knommu/system.h b/include/asm-m68knommu/system.h
new file mode 100644
index 000000000000..c341b66c147b
--- /dev/null
+++ b/include/asm-m68knommu/system.h
@@ -0,0 +1,286 @@
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/config.h> /* get configuration macros */
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last)				\
+{								\
+  void *_last;							\
+  __asm__ __volatile__(						\
+  	"movel	%1, %%a0\n\t"					\
+	"movel	%2, %%a1\n\t"					\
+	"jbsr resume\n\t"					\
+	"movel	%%d1, %0\n\t"					\
+       : "=d" (_last)						\
+       : "d" (prev), "d" (next)					\
+       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1");	\
+  (last) = _last;						\
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"andi.l #0xf8ff,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no outputs */					\
+	:							\
+        : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"ori.l  #0x0700,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no inputs */					\
+	:							\
+	: "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+
+#define	irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	((flags & 0x0700) == 0x0700);	\
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_rmb(var, value)    do { xchg(&var, value); } while (0)
+#define set_mb(var, value)     set_rmb(var, value)
+#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("moveb %2,%0\n\t"
+     "moveb %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("movew %2,%0\n\t"
+     "movew %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("movel %2,%0\n\t"
+     "movel %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	    case 1:
+		__asm__ __volatile__
+			("moveb %2,%0\n\t"
+			 "1:\n\t"
+			 "casb %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 2:
+		__asm__ __volatile__
+			("movew %2,%0\n\t"
+			 "1:\n\t"
+			 "casw %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 4:
+		__asm__ __volatile__
+			("movel %2,%0\n\t"
+			 "1:\n\t"
+			 "casl %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	return x;
+}
+#endif
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __inline__ unsigned long
+cmpxchg(volatile int *p, int old, int new)
+{
+	unsigned long flags;
+	int prev;
+
+	local_irq_save(flags);
+	if ((prev = *p) == old)
+		*p = new;
+	local_irq_restore(flags);
+	return(prev);
+}
+
+
+#ifdef CONFIG_M68332
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("				\
+	movew   #0x0000, 0xfffa6a;	\
+        reset;				\
+        /*movew #0x1557, 0xfffa44;*/	\
+        /*movew #0x0155, 0xfffa46;*/	\
+        moveal #0, %a0;			\
+        movec %a0, %vbr;		\
+        moveal 0, %sp;			\
+        moveal 4, %a0;			\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("				\
+        moveal #0x10c00000, %a0;	\
+        moveb #0, 0xFFFFF300;		\
+        moveal 0(%a0), %sp;		\
+        moveal 4(%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ *	Need to account for broken early mask of 5272 silicon. So don't
+ *	jump through the original start address. Jump strait into the
+ *	known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        jmp 0xf0000400;			\
+        ");				\
+})
+#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+	moveal #0x10000044, %a0;	\
+	movel #0xffffffff, (%a0);	\
+	moveal #0x10000001, %a0;	\
+	moveb #0x00, (%a0);		\
+        moveal #0xf0000004, %a0;	\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({						\
+	unsigned char volatile *reset;		\
+	asm("move.w	#0x2700, %sr");		\
+	reset = ((volatile unsigned short *)(MCF_IPSBAR + 0x110000));	\
+	while(1)				\
+	*reset |= (0x01 << 7);\
+})
+#else
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        moveal #0x4, %a0;		\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/include/asm-m68knommu/termbits.h b/include/asm-m68knommu/termbits.h
new file mode 100644
index 000000000000..05dd6bc27285
--- /dev/null
+++ b/include/asm-m68knommu/termbits.h
@@ -0,0 +1 @@
+#include <asm-m68k/termbits.h>
diff --git a/include/asm-m68knommu/termios.h b/include/asm-m68knommu/termios.h
new file mode 100644
index 000000000000..e7337881a985
--- /dev/null
+++ b/include/asm-m68knommu/termios.h
@@ -0,0 +1 @@
+#include <asm-m68k/termios.h>
diff --git a/include/asm-m68knommu/thread_info.h b/include/asm-m68knommu/thread_info.h
new file mode 100644
index 000000000000..c8153b7c1f5c
--- /dev/null
+++ b/include/asm-m68knommu/thread_info.h
@@ -0,0 +1,106 @@
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+                                                                                
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG*/
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"move.l	%%sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&d"(ti)
+		: "di" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+				__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
+#define free_thread_info(ti)	free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+#endif /* __ASSEMBLY__ */
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		5
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-m68knommu/timex.h b/include/asm-m68knommu/timex.h
new file mode 100644
index 000000000000..85069998db52
--- /dev/null
+++ b/include/asm-m68knommu/timex.h
@@ -0,0 +1 @@
+#include <asm-m68k/timex.h>
diff --git a/include/asm-m68knommu/tlb.h b/include/asm-m68knommu/tlb.h
new file mode 100644
index 000000000000..77a7c51ca299
--- /dev/null
+++ b/include/asm-m68knommu/tlb.h
@@ -0,0 +1 @@
+#include <asm-m68k/tlb.h>
diff --git a/include/asm-m68knommu/tlbflush.h b/include/asm-m68knommu/tlbflush.h
new file mode 100644
index 000000000000..bf7004e1afe0
--- /dev/null
+++ b/include/asm-m68knommu/tlbflush.h
@@ -0,0 +1,61 @@
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+extern inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/include/asm-m68knommu/topology.h b/include/asm-m68knommu/topology.h
new file mode 100644
index 000000000000..ca173e9f26ff
--- /dev/null
+++ b/include/asm-m68knommu/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/asm-m68knommu/traps.h b/include/asm-m68knommu/traps.h
new file mode 100644
index 000000000000..f2a81317cc10
--- /dev/null
+++ b/include/asm-m68knommu/traps.h
@@ -0,0 +1,150 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+
+#endif
+
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV1   (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define	VEC_UNIMPEA (60)
+#define	VEC_UNIMPII (61)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+	    } fmt2;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+	    } fmt3;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned long  pc;	     /* pc of faulted instr */
+	    } fmt4;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned short ssw;      /* special status word */
+		    unsigned short wb3s;     /* write back 3 status */
+		    unsigned short wb2s;     /* write back 2 status */
+		    unsigned short wb1s;     /* write back 1 status */
+		    unsigned long  faddr;    /* fault address */
+		    unsigned long  wb3a;     /* write back 3 address */
+		    unsigned long  wb3d;     /* write back 3 data */
+		    unsigned long  wb2a;     /* write back 2 address */
+		    unsigned long  wb2d;     /* write back 2 data */
+		    unsigned long  wb1a;     /* write back 1 address */
+		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+		    unsigned long  pd1;      /* push data 1*/
+		    unsigned long  pd2;      /* push data 2*/
+		    unsigned long  pd3;      /* push data 3*/
+	    } fmt7;
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+		    unsigned short int1[4];  /* internal registers */
+	    } fmt9;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;      /* special status word */
+		    unsigned short isc;      /* instruction stage c */
+		    unsigned short isb;      /* instruction stage b */
+		    unsigned long  daddr;    /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;    /* data cycle output buffer */
+		    unsigned short int3[2];
+	    } fmta;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;     /* special status word */
+		    unsigned short isc;     /* instruction stage c */
+		    unsigned short isb;     /* instruction stage b */
+		    unsigned long  daddr;   /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;   /* data cycle output buffer */
+		    unsigned short int3[4];
+		    unsigned long  baddr;   /* stage B address */
+		    unsigned short int4[2];
+		    unsigned long  dibuf;   /* data cycle input buffer */
+		    unsigned short int5[3];
+		    unsigned	   ver : 4; /* stack frame version # */
+		    unsigned	   int6:12;
+		    unsigned short int7[18];
+	    } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/include/asm-m68knommu/types.h b/include/asm-m68knommu/types.h
new file mode 100644
index 000000000000..031238c2d180
--- /dev/null
+++ b/include/asm-m68knommu/types.h
@@ -0,0 +1 @@
+#include <asm-m68k/types.h>
diff --git a/include/asm-m68knommu/uaccess.h b/include/asm-m68knommu/uaccess.h
new file mode 100644
index 000000000000..f0be74bb353c
--- /dev/null
+++ b/include/asm-m68knommu/uaccess.h
@@ -0,0 +1,182 @@
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
+
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+	extern unsigned long memory_start, memory_end;
+
+	return (((addr >= memory_start) && (addr+size < memory_end)) ||
+		(is_in_rom(addr) && is_in_rom(addr+size)));
+}
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void * addr, unsigned long size)
+{
+	return access_ok(type,addr,size)?0:-EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err = 0;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
+	break;						\
+    case 2:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
+	break;						\
+    case 4:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
+	break;						\
+    case 8:						\
+	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+	break;						\
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl)				\
+	__asm__ ("move" #bwl " %0,%1"				\
+		: /* no outputs */						\
+		:"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err = 0;						\
+    typeof(*(ptr)) __gu_val = 0;				\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
+	break;							\
+    case 2:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
+	break;							\
+    case 4:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
+	break;							\
+    case 8:							\
+	memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
+	break;							\
+    default:							\
+	__gu_val = 0;						\
+	__gu_err = __get_user_bad();				\
+	break;							\
+    }								\
+    (x) = __gu_val;						\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg)	\
+	__asm__ ("move" #bwl " %1,%0"			\
+		 : "=d" (x)							\
+		 : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/include/asm-m68knommu/ucontext.h b/include/asm-m68knommu/ucontext.h
new file mode 100644
index 000000000000..5d570cedbb02
--- /dev/null
+++ b/include/asm-m68knommu/ucontext.h
@@ -0,0 +1,38 @@
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+#ifdef CONFIG_FPU
+typedef struct fpregset {
+	int f_pcr;
+	int f_psr;
+	int f_fpiaddr;
+	int f_fpregs[8][3];
+} fpregset_t;
+#endif
+
+struct mcontext {
+	int version;
+	gregset_t gregs;
+#ifdef CONFIG_FPU
+	fpregset_t fpregs;
+#endif
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct mcontext	  uc_mcontext;
+#ifdef CONFIG_FPU
+	unsigned long	  uc_filler[80];
+#endif
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/include/asm-m68knommu/unaligned.h b/include/asm-m68knommu/unaligned.h
new file mode 100644
index 000000000000..8876f034ea64
--- /dev/null
+++ b/include/asm-m68knommu/unaligned.h
@@ -0,0 +1,24 @@
+#ifndef __M68K_UNALIGNED_H
+#define __M68K_UNALIGNED_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_COLDFIRE
+
+#include <asm-generic/unaligned.h>
+
+#else
+/*
+ * The m68k can do unaligned accesses itself. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
+
+#endif
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
new file mode 100644
index 000000000000..84b6fa14459f
--- /dev/null
+++ b/include/asm-m68knommu/unistd.h
@@ -0,0 +1,529 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_sys_setaltroot	278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+ 
+#define NR_syscalls		282
+
+/* user-visible error numbers are in the range -1 - -122: see
+   <asm-m68k/errno.h> */
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+	/* avoid using res which is declared to be in register d0; \
+	   errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+#define _syscall0(type, name)							\
+type name(void)									\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name)					\
+			: "cc", "%d0");						\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall1(type, name, atype, a)						\
+type name(atype a)								\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%2, %%d1\n\t"					\
+  			"movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name),					\
+			  "g" ((long)a)						\
+			: "cc", "%d0", "%d1");					\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall2(type, name, atype, a, btype, b)				\
+type name(atype a, btype b)							\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%3, %%d2\n\t"					\
+  			"movel	%2, %%d1\n\t"					\
+			"movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name),					\
+			  "a" ((long)a),					\
+			  "g" ((long)b)						\
+			: "cc", "%d0", "%d1", "%d2");				\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall3(type, name, atype, a, btype, b, ctype, c)			\
+type name(atype a, btype b, ctype c)						\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%4, %%d3\n\t"					\
+			"movel	%3, %%d2\n\t"					\
+  			"movel	%2, %%d1\n\t"					\
+			"movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name),					\
+			  "a" ((long)a),					\
+			  "a" ((long)b),					\
+			  "g" ((long)c)						\
+			: "cc", "%d0", "%d1", "%d2", "%d3");			\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d)		\
+type name(atype a, btype b, ctype c, dtype d)					\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%5, %%d4\n\t"					\
+			"movel	%4, %%d3\n\t"					\
+			"movel	%3, %%d2\n\t"					\
+  			"movel	%2, %%d1\n\t"					\
+			"movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name),					\
+			  "a" ((long)a),					\
+			  "a" ((long)b),					\
+			  "a" ((long)c),					\
+			  "g" ((long)d)						\
+			: "cc", "%d0", "%d1", "%d2", "%d3",			\
+			  "%d4");						\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e)	\
+type name(atype a, btype b, ctype c, dtype d, etype e)				\
+{										\
+  long __res;									\
+  __asm__ __volatile__ ("movel	%6, %%d5\n\t"					\
+			"movel	%5, %%d4\n\t"					\
+			"movel	%4, %%d3\n\t"					\
+			"movel	%3, %%d2\n\t"					\
+  			"movel	%2, %%d1\n\t"					\
+			"movel	%1, %%d0\n\t"					\
+  			"trap	#0\n\t"						\
+  			"movel	%%d0, %0"					\
+			: "=g" (__res)						\
+			: "i" (__NR_##name),					\
+			  "a" ((long)a),					\
+			  "a" ((long)b),					\
+			  "a" ((long)c),					\
+			  "a" ((long)d),					\
+			  "g" ((long)e)						\
+			: "cc", "%d0", "%d1", "%d2", "%d3",			\
+			  "%d4", "%d5");					\
+  if ((unsigned long)(__res) >= (unsigned long)(-125)) {				\
+    errno = -__res;								\
+    __res = -1;									\
+  }										\
+  return (type)__res;								\
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(int,pause)
+static inline _syscall0(int,sync)
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall1(int,_exit,int,exitcode)
+static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static inline _syscall1(int,delete_module,const char *,name)
+
+static inline pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(char *name, char **argv, char **envp);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct pt_regs;
+int sys_request_irq(unsigned int,
+			irqreturn_t (*)(int, void *, struct pt_regs *),
+			unsigned long, const char *, void *);
+void sys_free_irq(unsigned int, void *);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/include/asm-m68knommu/user.h b/include/asm-m68knommu/user.h
new file mode 100644
index 000000000000..a5a555b761c4
--- /dev/null
+++ b/include/asm-m68knommu/user.h
@@ -0,0 +1 @@
+#include <asm-m68k/user.h>
diff --git a/include/asm-mips/8253pit.h b/include/asm-mips/8253pit.h
new file mode 100644
index 000000000000..285f78488ccb
--- /dev/null
+++ b/include/asm-mips/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193182UL
+
+#endif
diff --git a/include/asm-mips/a.out.h b/include/asm-mips/a.out.h
new file mode 100644
index 000000000000..e42b3093e903
--- /dev/null
+++ b/include/asm-mips/a.out.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_A_OUT_H
+#define _ASM_A_OUT_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#endif
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for
+				    file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file,
+				   in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in
+				    bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MIPS32
+#define STACK_TOP	TASK_SIZE
+#endif
+#ifdef CONFIG_MIPS64
+#define STACK_TOP	(current->thread.mflags & MF_32BIT_ADDR ? TASK_SIZE32 : TASK_SIZE)
+#endif
+
+#endif
+
+#endif /* _ASM_A_OUT_H */
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
new file mode 100644
index 000000000000..2caa8c427204
--- /dev/null
+++ b/include/asm-mips/addrspace.h
@@ -0,0 +1,187 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ADDRSPACE_H
+#define _ASM_ADDRSPACE_H
+
+#include <linux/config.h>
+#include <spaces.h>
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ATYPE_
+#define _ATYPE32_
+#define _ATYPE64_
+#else
+#define _ATYPE_		__PTRDIFF_TYPE__
+#define _ATYPE32_	int
+#define _ATYPE64_	long long
+#endif
+
+/*
+ *  32-bit MIPS address spaces
+ */
+#ifdef __ASSEMBLY__
+#define _ACAST32_
+#define _ACAST64_
+#else
+#define _ACAST32_		(_ATYPE_)(_ATYPE32_)	/* widen if necessary */
+#define _ACAST64_		(_ATYPE64_)		/* do _not_ narrow */
+#endif
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#define KSEGX(a)		((_ACAST32_ (a)) & 0xe0000000)
+
+/*
+ * Returns the physical address of a CKSEGx / XKPHYS address
+ */
+#define CPHYSADDR(a)		((_ACAST32_ (a)) & 0x1fffffff)
+#define XPHYSADDR(a)            ((_ACAST64_ (a)) & 0x000000ffffffffff)
+
+#ifdef CONFIG_MIPS64
+
+/*
+ * Memory segments (64bit kernel mode addresses)
+ * The compatibility segments use the full 64-bit sign extended value.  Note
+ * the R8000 doesn't have them so don't reference these in generic MIPS code.
+ */
+#define XKUSEG			0x0000000000000000
+#define XKSSEG			0x4000000000000000
+#define XKPHYS			0x8000000000000000
+#define XKSEG			0xc000000000000000
+#define CKSEG0			0xffffffff80000000
+#define CKSEG1			0xffffffffa0000000
+#define CKSSEG			0xffffffffc0000000
+#define CKSEG3			0xffffffffe0000000
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | CKSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | CKSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | CKSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | CKSEG3)
+
+#else
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#define KSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define KSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define KSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define KSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ * These are the traditional names used in the 32-bit universe.
+ */
+#define KUSEG			0x00000000
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+#define KSEG2			0xc0000000
+#define KSEG3			0xe0000000
+
+#define CKUSEG			0x00000000
+#define CKSEG0			0x80000000
+#define CKSEG1			0xa0000000
+#define CKSEG2			0xc0000000
+#define CKSEG3			0xe0000000
+
+#endif
+
+/*
+ * Cache modes for XKPHYS address conversion macros
+ */
+#define K_CALG_COH_EXCL1_NOL2	0
+#define K_CALG_COH_SHRL1_NOL2	1
+#define K_CALG_UNCACHED		2
+#define K_CALG_NONCOHERENT	3
+#define K_CALG_COH_EXCL		4
+#define K_CALG_COH_SHAREABLE	5
+#define K_CALG_NOTUSED		6
+#define K_CALG_UNCACHED_ACCEL	7
+
+/*
+ * 64-bit address conversions
+ */
+#define PHYS_TO_XKSEG_UNCACHED(p)	PHYS_TO_XKPHYS(K_CALG_UNCACHED,(p))
+#define PHYS_TO_XKSEG_CACHED(p)		PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE,(p))
+#define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
+#define PHYS_TO_XKPHYS(cm,a)		(0x8000000000000000 | ((cm)<<59) | (a))
+
+#if defined (CONFIG_CPU_R4300)						\
+    || defined (CONFIG_CPU_R4X00)					\
+    || defined (CONFIG_CPU_R5000)					\
+    || defined (CONFIG_CPU_NEVADA)					\
+    || defined (CONFIG_CPU_TX49XX)					\
+    || defined (CONFIG_CPU_MIPS64)
+#define	KUSIZE			0x0000010000000000	/* 2^^40 */
+#define	KUSIZE_64		0x0000010000000000	/* 2^^40 */
+#define	K0SIZE			0x0000001000000000	/* 2^^36 */
+#define	K1SIZE			0x0000001000000000	/* 2^^36 */
+#define	K2SIZE			0x000000ff80000000
+#define	KSEGSIZE		0x000000ff80000000	/* max syssegsz */
+#define TO_PHYS_MASK		0x0000000fffffffff	/* 2^^36 - 1 */
+#endif
+
+#if defined (CONFIG_CPU_R8000)
+/* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */
+#define	KUSIZE			0x0000010000000000	/* 2^^40 */
+#define	KUSIZE_64		0x0000010000000000	/* 2^^40 */
+#define	K0SIZE			0x0000010000000000	/* 2^^40 */
+#define	K1SIZE			0x0000010000000000	/* 2^^40 */
+#define	K2SIZE			0x0001000000000000
+#define	KSEGSIZE		0x0000010000000000	/* max syssegsz */
+#define TO_PHYS_MASK		0x000000ffffffffff	/* 2^^40 - 1 */
+#endif
+
+#if defined (CONFIG_CPU_R10000)
+#define	KUSIZE			0x0000010000000000	/* 2^^40 */
+#define	KUSIZE_64		0x0000010000000000	/* 2^^40 */
+#define	K0SIZE			0x0000010000000000	/* 2^^40 */
+#define	K1SIZE			0x0000010000000000	/* 2^^40 */
+#define	K2SIZE			0x00000fff80000000
+#define	KSEGSIZE		0x00000fff80000000	/* max syssegsz */
+#define TO_PHYS_MASK		0x000000ffffffffff	/* 2^^40 - 1 */
+#endif
+
+/*
+ * Further names for SGI source compatibility.  These are stolen from
+ * IRIX's <sys/mips_addrspace.h>.
+ */
+#define KUBASE			0
+#define KUSIZE_32		0x0000000080000000	/* KUSIZE
+							   for a 32 bit proc */
+#define K0BASE_EXL_WR		0xa800000000000000	/* exclusive on write */
+#define K0BASE_NONCOH		0x9800000000000000	/* noncoherent */
+#define K0BASE_EXL		0xa000000000000000	/* exclusive */
+
+#ifndef CONFIG_CPU_R8000
+
+/*
+ * The R8000 doesn't have the 32-bit compat spaces so we don't define them
+ * in order to catch bugs in the source code.
+ */
+
+#define COMPAT_K1BASE32		0xffffffffa0000000
+#define PHYS_TO_COMPATK1(x)	((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
+
+#endif
+
+#define KDM_TO_PHYS(x)		(_ACAST64_ (x) & TO_PHYS_MASK)
+#define PHYS_TO_K0(x)		(_ACAST64_ (x) | CAC_BASE)
+
+#endif /* _ASM_ADDRSPACE_H */
diff --git a/include/asm-mips/arc/hinv.h b/include/asm-mips/arc/hinv.h
new file mode 100644
index 000000000000..ee792bf04002
--- /dev/null
+++ b/include/asm-mips/arc/hinv.h
@@ -0,0 +1,174 @@
+/*
+ * ARCS hardware/memory inventory/configuration and system ID definitions.
+ */
+#ifndef _ASM_ARC_HINV_H
+#define _ASM_ARC_HINV_H
+
+#include <asm/arc/types.h>
+
+/* configuration query defines */
+typedef enum configclass {
+	SystemClass,
+	ProcessorClass,
+	CacheClass,
+#ifndef	_NT_PROM
+	MemoryClass,
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass
+#else	/* _NT_PROM */
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass,
+	MemoryClass
+#endif	/* _NT_PROM */
+} CONFIGCLASS;
+
+typedef enum configtype {
+	ARC,
+	CPU,
+	FPU,
+	PrimaryICache,
+	PrimaryDCache,
+	SecondaryICache,
+	SecondaryDCache,
+	SecondaryCache,
+#ifndef	_NT_PROM
+	Memory,
+#endif
+	EISAAdapter,
+	TCAdapter,
+	SCSIAdapter,
+	DTIAdapter,
+	MultiFunctionAdapter,
+	DiskController,
+	TapeController,
+	CDROMController,
+	WORMController,
+	SerialController,
+	NetworkController,
+	DisplayController,
+	ParallelController,
+	PointerController,
+	KeyboardController,
+	AudioController,
+	OtherController,
+	DiskPeripheral,
+	FloppyDiskPeripheral,
+	TapePeripheral,
+	ModemPeripheral,
+	MonitorPeripheral,
+	PrinterPeripheral,
+	PointerPeripheral,
+	KeyboardPeripheral,
+	TerminalPeripheral,
+	LinePeripheral,
+	NetworkPeripheral,
+#ifdef	_NT_PROM
+	Memory,
+#endif
+	OtherPeripheral,
+
+	/* new stuff for IP30 */
+	/* added without moving anything */
+	/* except ANONYMOUS. */
+
+	XTalkAdapter,
+	PCIAdapter,
+	GIOAdapter,
+	TPUAdapter,
+
+	Anonymous
+} CONFIGTYPE;
+
+typedef enum {
+	Failed = 1,
+	ReadOnly = 2,
+	Removable = 4,
+	ConsoleIn = 8,
+	ConsoleOut = 16,
+	Input = 32,
+	Output = 64
+} IDENTIFIERFLAG;
+
+#ifndef NULL			/* for GetChild(NULL); */
+#define	NULL	0
+#endif
+
+union key_u {
+	struct {
+#ifdef	_MIPSEB
+		unsigned char  c_bsize;		/* block size in lines */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned short c_size;		/* cache size in 4K pages */
+#else	/* _MIPSEL */
+		unsigned short c_size;		/* cache size in 4K pages */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned char  c_bsize;		/* block size in lines */
+#endif	/* _MIPSEL */
+	} cache;
+	ULONG FullKey;
+};
+
+#if _MIPS_SIM == _ABI64
+#define SGI_ARCS_VERS	64			/* sgi 64-bit version */
+#define SGI_ARCS_REV	0			/* rev .00 */
+#else
+#define SGI_ARCS_VERS	1			/* first version */
+#define SGI_ARCS_REV	10			/* rev .10, 3/04/92 */
+#endif
+
+typedef struct component {
+	CONFIGCLASS	Class;
+	CONFIGTYPE	Type;
+	IDENTIFIERFLAG	Flags;
+	USHORT		Version;
+	USHORT		Revision;
+	ULONG 		Key;
+	ULONG		AffinityMask;
+	ULONG		ConfigurationDataSize;
+	ULONG		IdentifierLength;
+	char		*Identifier;
+} COMPONENT;
+
+/* internal structure that holds pathname parsing data */
+struct cfgdata {
+	char *name;			/* full name */
+	int minlen;			/* minimum length to match */
+	CONFIGTYPE type;		/* type of token */
+};
+
+/* System ID */
+typedef struct systemid {
+	CHAR VendorId[8];
+	CHAR ProductId[8];
+} SYSTEMID;
+
+/* memory query functions */
+typedef enum memorytype {
+	ExceptionBlock,
+	SPBPage,			/* ARCS == SystemParameterBlock */
+#ifndef	_NT_PROM
+	FreeContiguous,
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent
+#else	/* _NT_PROM */
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent,
+	FreeContiguous
+#endif	/* _NT_PROM */
+} MEMORYTYPE;
+
+typedef struct memorydescriptor {
+	MEMORYTYPE	Type;
+	LONG		BasePage;
+	LONG		PageCount;
+} MEMORYDESCRIPTOR;
+
+#endif /* _ASM_ARC_HINV_H */
diff --git a/include/asm-mips/arc/types.h b/include/asm-mips/arc/types.h
new file mode 100644
index 000000000000..bbb725c366fb
--- /dev/null
+++ b/include/asm-mips/arc/types.h
@@ -0,0 +1,87 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ARC_TYPES_H
+#define _ASM_ARC_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_ARC32
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__SI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__SI__)));
+typedef void		VOID;
+
+/* The pointer types.  Note that we're using a 64-bit compiler but all
+   pointer in the ARC structures are only 32-bit, so we need some disgusting
+   workarounds.  Keep your vomit bag handy.  */
+typedef LONG		_PCHAR;
+typedef LONG		_PSHORT;
+typedef LONG		_PLARGE_INTEGER;
+typedef	LONG		_PLONG;
+typedef LONG		_PUCHAR;
+typedef LONG		_PUSHORT;
+typedef LONG		_PULONG;
+typedef LONG		_PVOID;
+
+#endif /* CONFIG_ARC32 */
+
+#ifdef CONFIG_ARC64
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__DI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__DI__)));
+typedef void		VOID;
+
+/* The pointer types.  We're 64-bit and the firmware is also 64-bit, so
+   live is sane ...  */
+typedef CHAR		*_PCHAR;
+typedef SHORT		*_PSHORT;
+typedef LARGE_INTEGER	*_PLARGE_INTEGER;
+typedef	LONG		*_PLONG;
+typedef UCHAR		*_PUCHAR;
+typedef USHORT		*_PUSHORT;
+typedef ULONG		*_PULONG;
+typedef VOID		*_PVOID;
+
+#endif /* CONFIG_ARC64  */
+
+typedef CHAR		*PCHAR;
+typedef SHORT		*PSHORT;
+typedef LARGE_INTEGER	*PLARGE_INTEGER;
+typedef	LONG		*PLONG;
+typedef UCHAR		*PUCHAR;
+typedef USHORT		*PUSHORT;
+typedef ULONG		*PULONG;
+typedef VOID		*PVOID;
+
+/*
+ * Return type of ArcGetDisplayStatus()
+ */
+typedef struct {
+	USHORT	CursorXPosition;
+	USHORT	CursorYPosition;
+	USHORT	CursorMaxXPosition;
+	USHORT	CursorMaxYPosition;
+	USHORT	ForegroundColor;
+	USHORT	BackgroundColor;
+	UCHAR	HighIntensity;
+	UCHAR	Underscored;
+	UCHAR	ReverseVideo;
+} DISPLAY_STATUS;
+
+#endif /* _ASM_ARC_TYPES_H */
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h
new file mode 100644
index 000000000000..f53237772985
--- /dev/null
+++ b/include/asm-mips/asm.h
@@ -0,0 +1,396 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <linux/config.h>
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1,str2) str1##str2
+#else
+#define __CAT(str1,str2) str1/**/str2
+#endif
+#define CAT(str1,str2) __CAT(str1,str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register)                             \
+		.cprestore register
+#define CPADD(register)                                 \
+		.cpadd	register
+#define CPLOAD(register)                                \
+		.cpload	register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define	LEAF(symbol)                                    \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol,@function;               \
+		.ent	symbol,0;                       \
+symbol:		.frame	sp,0,ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define	NESTED(symbol, framesize, rpc)                  \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol,@function;               \
+		.ent	symbol,0;                       \
+symbol:		.frame	sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define	END(function)                                   \
+		.end	function;		        \
+		.size	function,.-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol)					\
+		.globl	symbol;                         \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol)					\
+		.globl	symbol;				\
+		.type	symbol,@function;		\
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define	ABS(symbol,value)                               \
+		.globl	symbol;                         \
+symbol		=	value
+
+#define	PANIC(msg)                                      \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0,8f;                          \
+		jal	panic;                          \
+9:		b	9b;                             \
+		.set	pop;				\
+		TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#define PRINT(string)                                   \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0,8f;                          \
+		jal	printk;                         \
+		.set	pop;				\
+		TEXT(string)
+
+#define	TEXT(msg)                                       \
+		.pushsection .data;			\
+8:		.asciiz	msg;                            \
+		.popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string)                                  \
+		.pushsection .text;			\
+		.word	1f;                             \
+		.popsection				\
+		.pushsection .data;			\
+1:		.asciiz	string;                         \
+		.popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop.  The R5000
+ * is one of them.  So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr)                                 \
+		.set	push;				\
+		.set	mips4;				\
+		pref	hint,addr;			\
+		.set	pop
+
+#define PREFX(hint,addr)                                \
+		.set	push;				\
+		.set	mips4;				\
+		prefx	hint,addr;			\
+		.set	pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint,addr)
+#define PREFX(hint,addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd,rs,rt)                                  \
+		.set	push;				\
+		.set	reorder;			\
+		beqz	rt,9f;                          \
+		move	rd,rs;                          \
+		.set	pop;				\
+9:
+#define MOVZ(rd,rs,rt)                                  \
+		.set	push;				\
+		.set	reorder;			\
+		bnez	rt,9f;                          \
+		move	rd,rs;                          \
+		.set	pop;				\
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd,rs,rt)                                  \
+		.set	push;				\
+		.set	noreorder;			\
+		bnezl	rt,9f;                          \
+		 move	rd,rs;                          \
+		.set	pop;				\
+9:
+#define MOVZ(rd,rs,rt)                                  \
+		.set	push;				\
+		.set	noreorder;			\
+		beqzl	rt,9f;                          \
+		 move	rd,rs;                          \
+		.set	pop;				\
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+    (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd,rs,rt)                                  \
+		movn	rd,rs,rt
+#define MOVZ(rd,rs,rt)                                  \
+		movz	rd,rs,rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ	7
+#define ALMASK	~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ	15
+#define ALMASK	~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG	8
+#else
+#define SZREG	4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S		sw
+#define REG_L		lw
+#define REG_SUBU	subu
+#define REG_ADDU	addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S		sd
+#define REG_L		ld
+#define REG_SUBU	dsubu
+#define REG_ADDU	daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD		add
+#define INT_ADDU	addu
+#define INT_ADDI	addi
+#define INT_ADDIU	addiu
+#define INT_SUB		sub
+#define INT_SUBU	subu
+#define INT_L		lw
+#define INT_S		sw
+#define INT_SLL		sll
+#define INT_SLLV	sllv
+#define INT_SRL		srl
+#define INT_SRLV	srlv
+#define INT_SRA		sra
+#define INT_SRAV	srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD		dadd
+#define INT_ADDU	daddu
+#define INT_ADDI	daddi
+#define INT_ADDIU	daddiu
+#define INT_SUB		dsub
+#define INT_SUBU	dsubu
+#define INT_L		ld
+#define INT_S		sd
+#define INT_SLL		dsll
+#define INT_SLLV	dsllv
+#define INT_SRL		dsrl
+#define INT_SRLV	dsrlv
+#define INT_SRA		dsra
+#define INT_SRAV	dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD	add
+#define LONG_ADDU	addu
+#define LONG_ADDI	addi
+#define LONG_ADDIU	addiu
+#define LONG_SUB	sub
+#define LONG_SUBU	subu
+#define LONG_L		lw
+#define LONG_S		sw
+#define LONG_SLL	sll
+#define LONG_SLLV	sllv
+#define LONG_SRL	srl
+#define LONG_SRLV	srlv
+#define LONG_SRA	sra
+#define LONG_SRAV	srav
+
+#define LONG		.word
+#define LONGSIZE	4
+#define LONGMASK	3
+#define LONGLOG		2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD	dadd
+#define LONG_ADDU	daddu
+#define LONG_ADDI	daddi
+#define LONG_ADDIU	daddiu
+#define LONG_SUB	dsub
+#define LONG_SUBU	dsubu
+#define LONG_L		ld
+#define LONG_S		sd
+#define LONG_SLL	dsll
+#define LONG_SLLV	dsllv
+#define LONG_SRL	dsrl
+#define LONG_SRLV	dsrlv
+#define LONG_SRA	dsra
+#define LONG_SRAV	dsrav
+
+#define LONG		.dword
+#define LONGSIZE	8
+#define LONGMASK	7
+#define LONGLOG		3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD		add
+#define PTR_ADDU	addu
+#define PTR_ADDI	addi
+#define PTR_ADDIU	addiu
+#define PTR_SUB		sub
+#define PTR_SUBU	subu
+#define PTR_L		lw
+#define PTR_S		sw
+#define PTR_LA		la
+#define PTR_SLL		sll
+#define PTR_SLLV	sllv
+#define PTR_SRL		srl
+#define PTR_SRLV	srlv
+#define PTR_SRA		sra
+#define PTR_SRAV	srav
+
+#define PTR_SCALESHIFT	2
+
+#define PTR		.word
+#define PTRSIZE		4
+#define PTRLOG		2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD		dadd
+#define PTR_ADDU	daddu
+#define PTR_ADDI	daddi
+#define PTR_ADDIU	daddiu
+#define PTR_SUB		dsub
+#define PTR_SUBU	dsubu
+#define PTR_L		ld
+#define PTR_S		sd
+#define PTR_LA		dla
+#define PTR_SLL		dsll
+#define PTR_SLLV	dsllv
+#define PTR_SRL		dsrl
+#define PTR_SRLV	dsrlv
+#define PTR_SRA		dsra
+#define PTR_SRAV	dsrav
+
+#define PTR_SCALESHIFT	3
+
+#define PTR		.dword
+#define PTRSIZE		8
+#define PTRLOG		3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0		mfc0
+#define MTC0		mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0		dmfc0
+#define MTC0		dmtc0
+#endif
+
+#define SSNOP		sll zero,zero,1
+
+#endif /* __ASM_ASM_H */
diff --git a/include/asm-mips/asmmacro-32.h b/include/asm-mips/asmmacro-32.h
new file mode 100644
index 000000000000..ac8823df2554
--- /dev/null
+++ b/include/asm-mips/asmmacro-32.h
@@ -0,0 +1,158 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_32_H
+#define _ASM_ASMMACRO_32_H
+
+#include <asm/offset.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_double thread status tmp1=t0 tmp2
+	cfc1	\tmp1,  fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp1, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_single thread tmp=t0
+	cfc1	\tmp,  fcr31
+	swc1	$f0,  THREAD_FPR0(\thread)
+	swc1	$f1,  THREAD_FPR1(\thread)
+	swc1	$f2,  THREAD_FPR2(\thread)
+	swc1	$f3,  THREAD_FPR3(\thread)
+	swc1	$f4,  THREAD_FPR4(\thread)
+	swc1	$f5,  THREAD_FPR5(\thread)
+	swc1	$f6,  THREAD_FPR6(\thread)
+	swc1	$f7,  THREAD_FPR7(\thread)
+	swc1	$f8,  THREAD_FPR8(\thread)
+	swc1	$f9,  THREAD_FPR9(\thread)
+	swc1	$f10, THREAD_FPR10(\thread)
+	swc1	$f11, THREAD_FPR11(\thread)
+	swc1	$f12, THREAD_FPR12(\thread)
+	swc1	$f13, THREAD_FPR13(\thread)
+	swc1	$f14, THREAD_FPR14(\thread)
+	swc1	$f15, THREAD_FPR15(\thread)
+	swc1	$f16, THREAD_FPR16(\thread)
+	swc1	$f17, THREAD_FPR17(\thread)
+	swc1	$f18, THREAD_FPR18(\thread)
+	swc1	$f19, THREAD_FPR19(\thread)
+	swc1	$f20, THREAD_FPR20(\thread)
+	swc1	$f21, THREAD_FPR21(\thread)
+	swc1	$f22, THREAD_FPR22(\thread)
+	swc1	$f23, THREAD_FPR23(\thread)
+	swc1	$f24, THREAD_FPR24(\thread)
+	swc1	$f25, THREAD_FPR25(\thread)
+	swc1	$f26, THREAD_FPR26(\thread)
+	swc1	$f27, THREAD_FPR27(\thread)
+	swc1	$f28, THREAD_FPR28(\thread)
+	swc1	$f29, THREAD_FPR29(\thread)
+	swc1	$f30, THREAD_FPR30(\thread)
+	swc1	$f31, THREAD_FPR31(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_single thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	lwc1	$f0,  THREAD_FPR0(\thread)
+	lwc1	$f1,  THREAD_FPR1(\thread)
+	lwc1	$f2,  THREAD_FPR2(\thread)
+	lwc1	$f3,  THREAD_FPR3(\thread)
+	lwc1	$f4,  THREAD_FPR4(\thread)
+	lwc1	$f5,  THREAD_FPR5(\thread)
+	lwc1	$f6,  THREAD_FPR6(\thread)
+	lwc1	$f7,  THREAD_FPR7(\thread)
+	lwc1	$f8,  THREAD_FPR8(\thread)
+	lwc1	$f9,  THREAD_FPR9(\thread)
+	lwc1	$f10, THREAD_FPR10(\thread)
+	lwc1	$f11, THREAD_FPR11(\thread)
+	lwc1	$f12, THREAD_FPR12(\thread)
+	lwc1	$f13, THREAD_FPR13(\thread)
+	lwc1	$f14, THREAD_FPR14(\thread)
+	lwc1	$f15, THREAD_FPR15(\thread)
+	lwc1	$f16, THREAD_FPR16(\thread)
+	lwc1	$f17, THREAD_FPR17(\thread)
+	lwc1	$f18, THREAD_FPR18(\thread)
+	lwc1	$f19, THREAD_FPR19(\thread)
+	lwc1	$f20, THREAD_FPR20(\thread)
+	lwc1	$f21, THREAD_FPR21(\thread)
+	lwc1	$f22, THREAD_FPR22(\thread)
+	lwc1	$f23, THREAD_FPR23(\thread)
+	lwc1	$f24, THREAD_FPR24(\thread)
+	lwc1	$f25, THREAD_FPR25(\thread)
+	lwc1	$f26, THREAD_FPR26(\thread)
+	lwc1	$f27, THREAD_FPR27(\thread)
+	lwc1	$f28, THREAD_FPR28(\thread)
+	lwc1	$f29, THREAD_FPR29(\thread)
+	lwc1	$f30, THREAD_FPR30(\thread)
+	lwc1	$f31, THREAD_FPR31(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_32_H */
diff --git a/include/asm-mips/asmmacro-64.h b/include/asm-mips/asmmacro-64.h
new file mode 100644
index 000000000000..bbed35511f5a
--- /dev/null
+++ b/include/asm-mips/asmmacro-64.h
@@ -0,0 +1,140 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ASMMACRO_64_H
+#define _ASM_ASMMACRO_64_H
+
+#include <asm/offset.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_16even thread tmp=t0
+	cfc1	\tmp, fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_16odd thread
+	sdc1	$f1,  THREAD_FPR1(\thread)
+	sdc1	$f3,  THREAD_FPR3(\thread)
+	sdc1	$f5,  THREAD_FPR5(\thread)
+	sdc1	$f7,  THREAD_FPR7(\thread)
+	sdc1	$f9,  THREAD_FPR9(\thread)
+	sdc1	$f11, THREAD_FPR11(\thread)
+	sdc1	$f13, THREAD_FPR13(\thread)
+	sdc1	$f15, THREAD_FPR15(\thread)
+	sdc1	$f17, THREAD_FPR17(\thread)
+	sdc1	$f19, THREAD_FPR19(\thread)
+	sdc1	$f21, THREAD_FPR21(\thread)
+	sdc1	$f23, THREAD_FPR23(\thread)
+	sdc1	$f25, THREAD_FPR25(\thread)
+	sdc1	$f27, THREAD_FPR27(\thread)
+	sdc1	$f29, THREAD_FPR29(\thread)
+	sdc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_save_double thread status tmp1 tmp2
+	sll	\tmp2, \tmp1, 5
+	bgez	\tmp2, 2f
+	fpu_save_16odd \thread
+2:
+	fpu_save_16even \thread \tmp1			# clobbers t1
+	.endm
+
+	.macro	fpu_restore_16even thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_16odd thread
+	ldc1	$f1,  THREAD_FPR1(\thread)
+	ldc1	$f3,  THREAD_FPR3(\thread)
+	ldc1	$f5,  THREAD_FPR5(\thread)
+	ldc1	$f7,  THREAD_FPR7(\thread)
+	ldc1	$f9,  THREAD_FPR9(\thread)
+	ldc1	$f11, THREAD_FPR11(\thread)
+	ldc1	$f13, THREAD_FPR13(\thread)
+	ldc1	$f15, THREAD_FPR15(\thread)
+	ldc1	$f17, THREAD_FPR17(\thread)
+	ldc1	$f19, THREAD_FPR19(\thread)
+	ldc1	$f21, THREAD_FPR21(\thread)
+	ldc1	$f23, THREAD_FPR23(\thread)
+	ldc1	$f25, THREAD_FPR25(\thread)
+	ldc1	$f27, THREAD_FPR27(\thread)
+	ldc1	$f29, THREAD_FPR29(\thread)
+	ldc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread tmp
+	mfc0	t0, CP0_STATUS
+	sll	t1, t0, 5
+	bgez	t1, 1f				# 16 register mode?
+
+	fpu_restore_16odd a0
+1:	fpu_restore_16even a0, t0		# clobbers t0
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_64_H */
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h
new file mode 100644
index 000000000000..37a460aa0378
--- /dev/null
+++ b/include/asm-mips/asmmacro.h
@@ -0,0 +1,51 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_H
+#define _ASM_ASMMACRO_H
+ 
+#include <linux/config.h>
+#include <asm/hazards.h>
+ 
+#ifdef CONFIG_MIPS32
+#include <asm/asmmacro-32.h>
+#endif
+#ifdef CONFIG_MIPS64
+#include <asm/asmmacro-64.h>
+#endif
+
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	xori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_disable_hazard
+	.endm
+
+#ifdef CONFIG_CPU_SB1
+	.macro	fpu_enable_hazard
+	.set	push
+	.set	noreorder
+	.set	mips2
+	SSNOP
+	bnezl	$0, .+4
+	 SSNOP
+	.set	pop
+	.endm
+#else
+	.macro	fpu_enable_hazard
+	.endm
+#endif
+
+#endif /* _ASM_ASMMACRO_H */
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
new file mode 100644
index 000000000000..7d89e87bc8c6
--- /dev/null
+++ b/include/asm-mips/atomic.h
@@ -0,0 +1,653 @@
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * But use these as seldom as possible since they are much more slower
+ * than regular operations.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 99, 2000, 03, 04 by Ralf Baechle
+ */
+
+/*
+ * As workaround for the ATOMIC_DEC_AND_LOCK / atomic_dec_and_lock mess in
+ * <linux/spinlock.h> we have to include <linux/spinlock.h> outside the
+ * main big wrapper ...
+ */
+#include <linux/config.h>
+#include <linux/spinlock.h>
+
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+
+extern spinlock_t atomic_lock;
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)    { (i) }
+
+/*
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/*
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v,i)		((v)->counter = (i))
+
+/*
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		v->counter += i;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+}
+
+/*
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		v->counter -= i;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+/*
+ * atomic_sub_if_positive - add integer to atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and decrement if it is greater than 0.
+ * The function returns the old value of @v minus 1.
+ */
+static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	sync						\n"
+		"1:							\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	sync						\n"
+		"1:							\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/*
+ * atomic_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ */
+#define atomic_dec_if_positive(v)	atomic_sub_if_positive(1, v)
+
+/*
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1,(v))
+
+/*
+ * atomic_dec - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1,(v))
+
+/*
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i,v) (atomic_add_return(i, (v)) < 0)
+
+#ifdef CONFIG_MIPS64
+
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)    { (i) }
+
+/*
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ */
+#define atomic64_read(v)	((v)->counter)
+
+/*
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ */
+#define atomic64_set(v,i)	((v)->counter = (i))
+
+/*
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		v->counter += i;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+}
+
+/*
+ * atomic64_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		v->counter -= i;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	sync						\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+/*
+ * atomic64_sub_if_positive - add integer to atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically test @v and decrement if it is greater than 0.
+ * The function returns the old value of @v minus 1.
+ */
+static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	sync						\n"
+		"1:							\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	sync						\n"
+		"1:							\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&atomic_lock, flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		spin_unlock_irqrestore(&atomic_lock, flags);
+	}
+
+	return result;
+}
+
+#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
+#define atomic64_inc_return(v) atomic64_add_return(1,(v))
+
+/*
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+/*
+ * atomic64_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ */
+#define atomic64_dec_if_positive(v)	atomic64_sub_if_positive(1, v)
+
+/*
+ * atomic64_inc - increment atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic64_inc(v) atomic64_add(1,(v))
+
+/*
+ * atomic64_dec - decrement and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic64_dec(v) atomic64_sub(1,(v))
+
+/*
+ * atomic64_add_negative - add and test if negative
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic64_add_negative(i,v) (atomic64_add_return(i, (v)) < 0)
+
+#endif /* CONFIG_MIPS64 */
+
+/*
+ * atomic*_return operations are serializing but not the non-*_return
+ * versions.
+ */
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/include/asm-mips/bcache.h b/include/asm-mips/bcache.h
new file mode 100644
index 000000000000..446102b34f4e
--- /dev/null
+++ b/include/asm-mips/bcache.h
@@ -0,0 +1,62 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1997, 1999 by Ralf Baechle
+ * Copyright (c) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BCACHE_H
+#define _ASM_BCACHE_H
+
+#include <linux/config.h>
+
+/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
+   chipset implemented caches.  On machines with other CPUs the CPU does the
+   cache thing itself. */
+struct bcache_ops {
+	void (*bc_enable)(void);
+	void (*bc_disable)(void);
+	void (*bc_wback_inv)(unsigned long page, unsigned long size);
+	void (*bc_inv)(unsigned long page, unsigned long size);
+};
+
+extern void indy_sc_init(void);
+extern void sni_pcimt_sc_init(void);
+
+#ifdef CONFIG_BOARD_SCACHE
+
+extern struct bcache_ops *bcops;
+
+static inline void bc_enable(void)
+{
+	bcops->bc_enable();
+}
+
+static inline void bc_disable(void)
+{
+	bcops->bc_disable();
+}
+
+static inline void bc_wback_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_wback_inv(page, size);
+}
+
+static inline void bc_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_inv(page, size);
+}
+
+#else /* !defined(CONFIG_BOARD_SCACHE) */
+
+/* Not R4000 / R4400 / R4600 / R5000.  */
+
+#define bc_enable() do { } while (0)
+#define bc_disable() do { } while (0)
+#define bc_wback_inv(page, size) do { } while (0)
+#define bc_inv(page, size) do { } while (0)
+
+#endif /* !defined(CONFIG_BOARD_SCACHE) */
+
+#endif /* _ASM_BCACHE_H */
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
new file mode 100644
index 000000000000..779d2187a6a4
--- /dev/null
+++ b/include/asm-mips/bitops.h
@@ -0,0 +1,850 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994 - 1997, 1999, 2000  Ralf Baechle (ralf@gnu.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>		/* sigh ... */
+#include <asm/cpu-features.h>
+
+#if (_MIPS_SZLONG == 32)
+#define SZLONG_LOG 5
+#define SZLONG_MASK 31UL
+#define __LL	"ll	"
+#define __SC	"sc	"
+#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x)) 
+#elif (_MIPS_SZLONG == 64)
+#define SZLONG_LOG 6
+#define SZLONG_MASK 63UL
+#define __LL	"lld	"
+#define __SC	"scd	"
+#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x)) 
+#endif
+
+#ifdef __KERNEL__
+
+#include <asm/interrupt.h>
+#include <asm/sgidefs.h>
+#include <asm/war.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+/*
+ * Only disable interrupt for kernel mode stuff to keep usermode stuff
+ * that dares to use kernel include files alive.
+ */
+
+#define __bi_flags			unsigned long flags
+#define __bi_local_irq_save(x)		local_irq_save(x)
+#define __bi_local_irq_restore(x)	local_irq_restore(x)
+#else
+#define __bi_flags
+#define __bi_local_irq_save(x)
+#define __bi_local_irq_restore(x)
+#endif /* __KERNEL__ */
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	"__SC	"%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	"__SC	"%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		*a |= mask;
+		__bi_local_irq_restore(flags);
+	}
+}
+
+/*
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(unsigned long nr, volatile unsigned long * addr)
+{
+	unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+
+	*m |= 1UL << (nr & SZLONG_MASK);
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		*a &= ~mask;
+		__bi_local_irq_restore(flags);
+	}
+}
+
+/*
+ * __clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * Unlike clear_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __clear_bit(unsigned long nr, volatile unsigned long * addr)
+{
+	unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+
+	*m &= ~(1UL << (nr & SZLONG_MASK));
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	"__SC	"%0, %1				\n"
+		"	beqzl	%0, 1b				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	"__SC	"%0, %1				\n"
+		"	beqz	%0, 1b				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		*a ^= mask;
+		__bi_local_irq_restore(flags);
+	}
+}
+
+/*
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(unsigned long nr, volatile unsigned long * addr)
+{
+	unsigned long * m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+
+	*m ^= 1UL << (nr & SZLONG_MASK);
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"sync							\n"
+#endif
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"	.set	noreorder	# test_and_set_bit	\n"
+		"1:	" __LL "%0, %1					\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqz	%2, 1b					\n"
+		"	 and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"sync							\n"
+#endif
+		".set\treorder"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		int retval;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		retval = (mask & *a) != 0;
+		*a |= mask;
+		__bi_local_irq_restore(flags);
+
+		return retval;
+	}
+}
+
+/*
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned long mask;
+	int retval;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << (nr & SZLONG_MASK);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+
+	return retval;
+}
+
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+			__SC 	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"	.set	noreorder	# test_and_clear_bit	\n"
+		"1:	" __LL	"%0, %1					\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+			__SC 	"%2, %1					\n"
+		"	beqz	%2, 1b					\n"
+		"	 and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"	.set	reorder					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		int retval;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		retval = (mask & *a) != 0;
+		*a &= ~mask;
+		__bi_local_irq_restore(flags);
+
+		return retval;
+	}
+}
+
+/*
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(unsigned long nr,
+	volatile unsigned long * addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned long mask;
+	int retval;
+
+	a += (nr >> SZLONG_LOG);
+	mask = 1UL << (nr & SZLONG_MASK);
+	retval = ((mask & *a) != 0);
+	*a &= ~mask;
+
+	return retval;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"1:	" __LL	" %0, %1	# test_and_change_bit	\n"
+		"	xor	%2, %0, %3				\n"
+		"	"__SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp, res;
+
+		__asm__ __volatile__(
+		"	.set	noreorder	# test_and_change_bit	\n"
+		"1:	" __LL	" %0, %1				\n"
+		"	xor	%2, %0, %3				\n"
+		"	"__SC	"\t%2, %1				\n"
+		"	beqz	%2, 1b					\n"
+		"	 and	%2, %0, %3				\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"	.set	reorder					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
+		: "memory");
+
+		return res != 0;
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask, retval;
+		__bi_flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << (nr & SZLONG_MASK);
+		__bi_local_irq_save(flags);
+		retval = (mask & *a) != 0;
+		*a ^= mask;
+		__bi_local_irq_restore(flags);
+
+		return retval;
+	}
+}
+
+/*
+ * __test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_change_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned long mask;
+	int retval;
+
+	a += (nr >> SZLONG_LOG);
+	mask = 1UL << (nr & SZLONG_MASK);
+	retval = ((mask & *a) != 0);
+	*a ^= mask;
+
+	return retval;
+}
+
+#undef __bi_flags
+#undef __bi_local_irq_save
+#undef __bi_local_irq_restore
+
+/*
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(unsigned long nr, const volatile unsigned long *addr)
+{
+	return 1UL & (addr[nr >> SZLONG_LOG] >> (nr & SZLONG_MASK));
+}
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	int b = 0, s;
+
+	word = ~word;
+#ifdef CONFIG_MIPS32
+	s = 16; if (word << 16 != 0) s = 0; b += s; word >>= s;
+	s =  8; if (word << 24 != 0) s = 0; b += s; word >>= s;
+	s =  4; if (word << 28 != 0) s = 0; b += s; word >>= s;
+	s =  2; if (word << 30 != 0) s = 0; b += s; word >>= s;
+	s =  1; if (word << 31 != 0) s = 0; b += s;
+#endif
+#ifdef CONFIG_MIPS64
+	s = 32; if (word << 32 != 0) s = 0; b += s; word >>= s;
+	s = 16; if (word << 48 != 0) s = 0; b += s; word >>= s;
+	s =  8; if (word << 56 != 0) s = 0; b += s; word >>= s;
+	s =  4; if (word << 60 != 0) s = 0; b += s; word >>= s;
+	s =  2; if (word << 62 != 0) s = 0; b += s; word >>= s;
+	s =  1; if (word << 63 != 0) s = 0; b += s;
+#endif
+
+	return b;
+}
+
+/*
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	return ffz(~word);
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+/*
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline unsigned long find_next_zero_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr + (offset >> SZLONG_LOG);
+	unsigned long result = offset & ~SZLONG_MASK;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= SZLONG_MASK;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (_MIPS_SZLONG-offset);
+		if (size < _MIPS_SZLONG)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= _MIPS_SZLONG;
+		result += _MIPS_SZLONG;
+	}
+	while (size & ~SZLONG_MASK) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += _MIPS_SZLONG;
+		size -= _MIPS_SZLONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)		/* Are any bits zero? */
+		return result + size;	/* Nope. */
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+/*
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr + (offset >> SZLONG_LOG);
+	unsigned long result = offset & ~SZLONG_MASK;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= SZLONG_MASK;
+	if (offset) {
+		tmp = *(p++);
+		tmp &= ~0UL << offset;
+		if (size < _MIPS_SZLONG)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= _MIPS_SZLONG;
+		result += _MIPS_SZLONG;
+	}
+	while (size & ~SZLONG_MASK) {
+		if ((tmp = *(p++)))
+			goto found_middle;
+		result += _MIPS_SZLONG;
+		size -= _MIPS_SZLONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (_MIPS_SZLONG - size);
+	if (tmp == 0UL)			/* Are any bits set? */
+		return result + size;	/* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/*
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+#ifdef CONFIG_MIPS32
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+#endif
+#ifdef CONFIG_MIPS64
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 64;
+	return __ffs(b[2]) + 128;
+#endif
+}
+
+/*
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight64(x)	generic_hweight64(x)
+#define hweight32(x)	generic_hweight32(x)
+#define hweight16(x)	generic_hweight16(x)
+#define hweight8(x)	generic_hweight8(x)
+
+static inline int __test_and_set_le_bit(unsigned long nr, unsigned long *addr)
+{
+	unsigned char	*ADDR = (unsigned char *) addr;
+	int		mask, retval;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+
+	return retval;
+}
+
+static inline int __test_and_clear_le_bit(unsigned long nr, unsigned long *addr)
+{
+	unsigned char	*ADDR = (unsigned char *) addr;
+	int		mask, retval;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+
+	return retval;
+}
+
+static inline int test_le_bit(unsigned long nr, const unsigned long * addr)
+{
+	const unsigned char	*ADDR = (const unsigned char *) addr;
+	int			mask;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+
+	return ((mask & *ADDR) != 0);
+}
+
+static inline unsigned long find_next_zero_le_bit(unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> SZLONG_LOG);
+	unsigned long result = offset & ~SZLONG_MASK;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= SZLONG_MASK;
+	if (offset) {
+		tmp = cpu_to_lelongp(p++);
+		tmp |= ~0UL >> (_MIPS_SZLONG-offset); /* bug or feature ? */
+		if (size < _MIPS_SZLONG)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= _MIPS_SZLONG;
+		result += _MIPS_SZLONG;
+	}
+	while (size & ~SZLONG_MASK) {
+		if (~(tmp = cpu_to_lelongp(p++)))
+			goto found_middle;
+		result += _MIPS_SZLONG;
+		size -= _MIPS_SZLONG;
+	}
+	if (!size)
+		return result;
+	tmp = cpu_to_lelongp(p);
+
+found_first:
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)		/* Are any bits zero? */
+		return result + size;	/* Nope. */
+
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define find_first_zero_le_bit(addr, size) \
+	find_next_zero_le_bit((addr), (size), 0)
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_le_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_le_bit((nr),(unsigned long*)addr)
+ #define ext2_set_bit_atomic(lock, nr, addr)		\
+({							\
+	int ret;					\
+	spin_lock(lock);				\
+	ret = ext2_set_bit((nr), (addr));		\
+	spin_unlock(lock);				\
+	ret;						\
+})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+({							\
+	int ret;					\
+	spin_lock(lock);				\
+	ret = ext2_clear_bit((nr), (addr));		\
+	spin_unlock(lock);				\
+	ret;						\
+})
+#define ext2_test_bit(nr, addr)	test_le_bit((nr),(unsigned long*)addr)
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_le_bit((unsigned long*)addr, size, off)
+
+/*
+ * Bitmap functions for the minix filesystem.
+ *
+ * FIXME: These assume that Minix uses the native byte/bitorder.
+ * This limits the Minix filesystem's value for data exchange very much.
+ */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
new file mode 100644
index 000000000000..b1e57d783604
--- /dev/null
+++ b/include/asm-mips/bootinfo.h
@@ -0,0 +1,256 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2003 by Ralf Baechle
+ * Copyright (C) 1995, 1996 Andreas Busse
+ * Copyright (C) 1995, 1996 Stoned Elipot
+ * Copyright (C) 1995, 1996 Paul M. Antoine.
+ */
+#ifndef _ASM_BOOTINFO_H
+#define _ASM_BOOTINFO_H
+
+#include <linux/types.h>
+#include <asm/setup.h>
+
+/*
+ * The MACH_GROUP_ IDs are the equivalent to PCI vendor IDs; the remaining
+ * MACH_ values equivalent to product IDs.  As such the numbers do not
+ * necessarily reflect technical relations or similarities between systems.
+ */
+
+/*
+ * Valid machtype values for group unknown
+ */
+#define MACH_GROUP_UNKNOWN      0	/* whatever...			*/
+#define  MACH_UNKNOWN		0	/* whatever...			*/
+
+/*
+ * Valid machtype values for group JAZZ
+ */
+#define MACH_GROUP_JAZZ		1 	/* Jazz				*/
+#define  MACH_ACER_PICA_61	0	/* Acer PICA-61 (PICA1)		*/
+#define  MACH_MIPS_MAGNUM_4000	1	/* Mips Magnum 4000 "RC4030"	*/
+#define  MACH_OLIVETTI_M700	2	/* Olivetti M700-10 (-15 ??)    */
+
+/*
+ * Valid machtype for group DEC
+ */
+#define MACH_GROUP_DEC          2	/* Digital Equipment		*/
+#define  MACH_DSUNKNOWN		0
+#define  MACH_DS23100		1	/* DECstation 2100 or 3100	*/
+#define  MACH_DS5100		2	/* DECsystem 5100		*/
+#define  MACH_DS5000_200	3	/* DECstation 5000/200		*/
+#define  MACH_DS5000_1XX	4	/* DECstation 5000/120, 125, 133, 150 */
+#define  MACH_DS5000_XX		5	/* DECstation 5000/20, 25, 33, 50 */
+#define  MACH_DS5000_2X0	6	/* DECstation 5000/240, 260	*/
+#define  MACH_DS5400		7	/* DECsystem 5400		*/
+#define  MACH_DS5500		8	/* DECsystem 5500		*/
+#define  MACH_DS5800		9	/* DECsystem 5800		*/
+#define  MACH_DS5900		10	/* DECsystem 5900		*/
+
+/*
+ * Valid machtype for group ARC
+ */
+#define MACH_GROUP_ARC		3	/* Deskstation			*/
+#define MACH_DESKSTATION_RPC44  0	/* Deskstation rPC44 */
+#define MACH_DESKSTATION_TYNE	1	/* Deskstation Tyne */
+
+/*
+ * Valid machtype for group SNI_RM
+ */
+#define MACH_GROUP_SNI_RM	4	/* Siemens Nixdorf RM series	*/
+#define  MACH_SNI_RM200_PCI	0	/* RM200/RM300/RM400 PCI series */
+
+/*
+ * Valid machtype for group ACN
+ */
+#define MACH_GROUP_ACN		5
+#define  MACH_ACN_MIPS_BOARD	0       /* ACN MIPS single board        */
+
+/*
+ * Valid machtype for group SGI
+ */
+#define MACH_GROUP_SGI          6	/* Silicon Graphics		*/
+#define  MACH_SGI_IP22		0	/* Indy, Indigo2, Challenge S	*/
+#define  MACH_SGI_IP27		1	/* Origin 200, Origin 2000, Onyx 2 */
+#define  MACH_SGI_IP28		2	/* Indigo2 Impact		*/
+#define  MACH_SGI_IP32		3	/* O2				*/
+
+/*
+ * Valid machtype for group COBALT
+ */
+#define MACH_GROUP_COBALT       7	/* Cobalt servers		*/
+#define  MACH_COBALT_27		0	/* Proto "27" hardware		*/
+
+/*
+ * Valid machtype for group NEC DDB
+ */
+#define MACH_GROUP_NEC_DDB	8	/* NEC DDB			*/
+#define  MACH_NEC_DDB5074	0	/* NEC DDB Vrc-5074 */
+#define  MACH_NEC_DDB5476	1	/* NEC DDB Vrc-5476 */
+#define  MACH_NEC_DDB5477	2	/* NEC DDB Vrc-5477 */
+#define  MACH_NEC_ROCKHOPPER	3	/* Rockhopper base board */
+#define  MACH_NEC_ROCKHOPPERII	4	/* Rockhopper II base board */
+
+/*
+ * Valid machtype for group BAGET
+ */
+#define MACH_GROUP_BAGET	9	/* Baget			*/
+#define  MACH_BAGET201		0	/* BT23-201 */
+#define  MACH_BAGET202		1	/* BT23-202 */
+
+/*
+ * Cosine boards.
+ */
+#define MACH_GROUP_COSINE      10	/* CoSine Orion			*/
+#define  MACH_COSINE_ORION	0
+
+/*
+ * Valid machtype for group GALILEO
+ */
+#define MACH_GROUP_GALILEO     11	/* Galileo Eval Boards		*/
+#define  MACH_EV96100		0	/* EV96100 */
+#define  MACH_EV64120A		1	/* EV64120A */
+
+/*
+ * Valid machtype for group MOMENCO
+ */
+#define MACH_GROUP_MOMENCO	12	/* Momentum Boards		*/
+#define  MACH_MOMENCO_OCELOT	0
+#define  MACH_MOMENCO_OCELOT_G	1
+#define  MACH_MOMENCO_OCELOT_C	2
+#define  MACH_MOMENCO_JAGUAR_ATX 3
+#define  MACH_MOMENCO_OCELOT_3	4
+
+/*
+ * Valid machtype for group ITE
+ */
+#define MACH_GROUP_ITE		13	/* ITE Semi Eval Boards		*/
+#define  MACH_QED_4N_S01B	0	/* ITE8172 based eval board */
+
+/*
+ * Valid machtype for group PHILIPS
+ */
+#define MACH_GROUP_PHILIPS     14
+#define  MACH_PHILIPS_NINO	0	/* Nino */
+#define  MACH_PHILIPS_VELO	1	/* Velo */
+
+/*
+ * Valid machtype for group Globespan
+ */
+#define MACH_GROUP_GLOBESPAN   15	/* Globespan */
+#define  MACH_IVR		0	/* IVR eval board */
+
+/*
+ * Valid machtype for group SIBYTE
+ */
+#define MACH_GROUP_SIBYTE	16	/* Sibyte / Broadcom */
+#define  MACH_SWARM              0
+
+/*
+ * Valid machtypes for group Toshiba
+ */
+#define MACH_GROUP_TOSHIBA	17 /* Toshiba Reference Systems TSBREF       */
+#define  MACH_PALLAS		0
+#define  MACH_TOPAS		1
+#define  MACH_JMR		2
+#define  MACH_TOSHIBA_JMR3927	3	/* JMR-TX3927 CPU/IO board */
+#define  MACH_TOSHIBA_RBTX4927	4
+#define  MACH_TOSHIBA_RBTX4937	5
+
+#define GROUP_TOSHIBA_NAMES	{ "Pallas", "TopasCE", "JMR", "JMR TX3927", \
+				  "RBTX4927", "RBTX4937" }
+
+/*
+ * Valid machtype for group Alchemy
+ */
+#define MACH_GROUP_ALCHEMY     18	/* AMD Alchemy	*/
+#define  MACH_PB1000		0	/* Au1000-based eval board */
+#define  MACH_PB1100		1	/* Au1100-based eval board */
+#define  MACH_PB1500		2	/* Au1500-based eval board */
+#define  MACH_DB1000		3       /* Au1000-based eval board */
+#define  MACH_DB1100		4       /* Au1100-based eval board */
+#define  MACH_DB1500		5       /* Au1500-based eval board */
+#define  MACH_XXS1500		6       /* Au1500-based eval board */
+#define  MACH_MTX1		7       /* 4G MTX-1 Au1500-based board */
+#define  MACH_PB1550		8       /* Au1550-based eval board */
+#define  MACH_DB1550		9       /* Au1550-based eval board */
+
+/*
+ * Valid machtype for group NEC_VR41XX
+ *
+ * Various NEC-based devices.
+ *
+ * FIXME: MACH_GROUPs should be by _MANUFACTURER_ of * the device, not by
+ *        technical properties, so no new additions to this group.
+ */
+#define MACH_GROUP_NEC_VR41XX  19
+#define  MACH_NEC_OSPREY	0	/* Osprey eval board */
+#define  MACH_NEC_EAGLE		1	/* NEC Eagle/Hawk board */
+#define  MACH_ZAO_CAPCELLA	2	/* ZAO Networks Capcella */
+#define  MACH_VICTOR_MPC30X	3	/* Victor MP-C303/304 */
+#define  MACH_IBM_WORKPAD	4	/* IBM WorkPad z50 */
+#define  MACH_CASIO_E55		5	/* CASIO CASSIOPEIA E-10/15/55/65 */
+#define  MACH_TANBAC_TB0226	6	/* TANBAC TB0226 (Mbase) */
+#define  MACH_TANBAC_TB0229	7	/* TANBAC TB0229 (VR4131DIMM) */
+#define  MACH_NEC_CMBVR4133	8	/* CMB VR4133 Board */
+
+#define MACH_GROUP_HP_LJ	20	/* Hewlett Packard LaserJet	*/
+#define  MACH_HP_LASERJET	1
+
+/*
+ * Valid machtype for group LASAT
+ */
+#define MACH_GROUP_LASAT       21
+#define  MACH_LASAT_100		0	/* Masquerade II/SP100/SP50/SP25 */
+#define  MACH_LASAT_200		1	/* Masquerade PRO/SP200 */
+
+/*
+ * Valid machtype for group TITAN
+ */
+#define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
+#define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
+
+#define CL_SIZE			COMMAND_LINE_SIZE
+
+const char *get_system_type(void);
+
+extern unsigned long mips_machtype;
+extern unsigned long mips_machgroup;
+
+#define BOOT_MEM_MAP_MAX	32
+#define BOOT_MEM_RAM		1
+#define BOOT_MEM_ROM_DATA	2
+#define BOOT_MEM_RESERVED	3
+
+/*
+ * A memory map that's built upon what was determined
+ * or specified on the command line.
+ */
+struct boot_mem_map {
+	int nr_map;
+	struct boot_mem_map_entry {
+		phys_t addr;	/* start of memory segment */
+		phys_t size;	/* size of memory segment */
+		long type;		/* type of memory segment */
+	} map[BOOT_MEM_MAP_MAX];
+};
+
+extern struct boot_mem_map boot_mem_map;
+
+extern void add_memory_region(phys_t start, phys_t size, long type);
+
+extern void prom_init(void);
+
+/*
+ * Initial kernel command line, usually setup by prom_init()
+ */
+extern char arcs_cmdline[CL_SIZE];
+
+/*
+ * Registers a0, a1, a3 and a4 as passed to the kenrel entry by firmware
+ */
+extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+#endif /* _ASM_BOOTINFO_H */
diff --git a/include/asm-mips/branch.h b/include/asm-mips/branch.h
new file mode 100644
index 000000000000..37c6857c8d4a
--- /dev/null
+++ b/include/asm-mips/branch.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle
+ */
+#ifndef _ASM_BRANCH_H
+#define _ASM_BRANCH_H
+
+#include <asm/ptrace.h>
+
+static inline int delay_slot(struct pt_regs *regs)
+{
+	return regs->cp0_cause & CAUSEF_BD;
+}
+
+static inline unsigned long exception_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs))
+		return regs->cp0_epc;
+
+	return regs->cp0_epc + 4;
+}
+
+extern int __compute_return_epc(struct pt_regs *regs);
+
+static inline int compute_return_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs)) {
+		regs->cp0_epc += 4;
+		return 0;
+	}
+
+	return __compute_return_epc(regs);
+}
+
+#endif /* _ASM_BRANCH_H */
diff --git a/include/asm-mips/break.h b/include/asm-mips/break.h
new file mode 100644
index 000000000000..2e6de788f207
--- /dev/null
+++ b/include/asm-mips/break.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP	0	/* User bp (used by debuggers) */
+#define BRK_KERNELBP	1	/* Break in the kernel */
+#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
+#define BRK_OVERFLOW	6	/* Overflow check */
+#define BRK_DIVZERO	7	/* Divide by zero check */
+#define BRK_RANGE	8	/* Range error check */
+#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
+#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
+#define BRK_BUG		512	/* Used by BUG() */
+#define BRK_MULOVF	1023	/* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
diff --git a/include/asm-mips/bug.h b/include/asm-mips/bug.h
new file mode 100644
index 000000000000..eb94bb96cfbc
--- /dev/null
+++ b/include/asm-mips/bug.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_BUG_H
+#define __ASM_BUG_H
+
+#include <asm/break.h>
+
+#define BUG()								\
+do {									\
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
+} while (0)
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-mips/bugs.h b/include/asm-mips/bugs.h
new file mode 100644
index 000000000000..18cced19cca4
--- /dev/null
+++ b/include/asm-mips/bugs.h
@@ -0,0 +1,23 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <linux/config.h>
+
+extern void check_bugs32(void);
+extern void check_bugs64(void);
+
+static inline void check_bugs(void)
+{
+	check_bugs32();
+#ifdef CONFIG_MIPS64
+	check_bugs64();
+#endif
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/include/asm-mips/byteorder.h b/include/asm-mips/byteorder.h
new file mode 100644
index 000000000000..d1fe9e5c62e4
--- /dev/null
+++ b/include/asm-mips/byteorder.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#if defined (__MIPSEB__)
+#  include <linux/byteorder/big_endian.h>
+#elif defined (__MIPSEL__)
+#  include <linux/byteorder/little_endian.h>
+#else
+#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-mips/cache.h b/include/asm-mips/cache.h
new file mode 100644
index 000000000000..4517bdf20953
--- /dev/null
+++ b/include/asm-mips/cache.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <linux/config.h>
+
+#define L1_CACHE_SHIFT		CONFIG_MIPS_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX	6
+#define SMP_CACHE_SHIFT		L1_CACHE_SHIFT
+#define SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#define ARCH_KMALLOC_MINALIGN	8
+
+#endif /* _ASM_CACHE_H */
diff --git a/include/asm-mips/cachectl.h b/include/asm-mips/cachectl.h
new file mode 100644
index 000000000000..f3ce721861d3
--- /dev/null
+++ b/include/asm-mips/cachectl.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ */
+#ifndef	_ASM_CACHECTL
+#define	_ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE	0	/* make pages cacheable */
+#define UNCACHEABLE	1	/* make pages uncacheable */
+
+#endif	/* _ASM_CACHECTL */
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
new file mode 100644
index 000000000000..635f1bfb403e
--- /dev/null
+++ b/include/asm-mips/cacheflush.h
@@ -0,0 +1,81 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+#include <asm/cpu-features.h>
+
+/* Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *  - flush_icache_range(start, end) flush a range of instructions
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ * MIPS specific flush operations:
+ *
+ *  - flush_cache_sigtramp() flush signal trampoline
+ *  - flush_icache_all() flush the entire instruction cache
+ *  - flush_data_cache_page() flushes a page from the data cache
+ */
+extern void (*flush_cache_all)(void);
+extern void (*__flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+extern void __flush_dcache_page(struct page *page);
+
+static inline void flush_dcache_page(struct page *page)
+{
+	if (cpu_has_dc_aliases)
+		__flush_dcache_page(page);
+
+}
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void (*flush_icache_page)(struct vm_area_struct *vma,
+	struct page *page);
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy(dst, (void *) src, len);					\
+	flush_icache_page(vma, page);					\
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
+	memcpy(dst, src, len)
+
+extern void (*flush_cache_sigtramp)(unsigned long addr);
+extern void (*flush_icache_all)(void);
+extern void (*flush_data_cache_page)(unsigned long addr);
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty			PG_arch_1
+
+#define Page_dcache_dirty(page)		\
+	test_bit(PG_dcache_dirty, &(page)->flags)
+#define SetPageDcacheDirty(page)	\
+	set_bit(PG_dcache_dirty, &(page)->flags)
+#define ClearPageDcacheDirty(page)	\
+	clear_bit(PG_dcache_dirty, &(page)->flags)
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h
new file mode 100644
index 000000000000..c4a1ec31ff6a
--- /dev/null
+++ b/include/asm-mips/cacheops.h
@@ -0,0 +1,81 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef	__ASM_CACHEOPS_H
+#define	__ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I      0x00
+#define Index_Writeback_Inv_D   0x01
+#define Index_Load_Tag_I	0x04
+#define Index_Load_Tag_D	0x05
+#define Index_Store_Tag_I	0x08
+#define Index_Store_Tag_D	0x09
+#define Hit_Invalidate_I	0x10
+#define Hit_Invalidate_D	0x11
+#define Hit_Writeback_Inv_D	0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D	0x0d
+#define Fill			0x14
+#define Hit_Writeback_I		0x18
+#define Hit_Writeback_D		0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI     0x02
+#define Index_Writeback_Inv_SD  0x03
+#define Index_Load_Tag_SI	0x06
+#define Index_Load_Tag_SD	0x07
+#define Index_Store_Tag_SI	0x0A
+#define Index_Store_Tag_SD	0x0B
+#define Create_Dirty_Excl_SD	0x0f
+#define Hit_Invalidate_SI	0x12
+#define Hit_Invalidate_SD	0x13
+#define Hit_Writeback_Inv_SD	0x17
+#define Hit_Writeback_SD	0x1b
+#define Hit_Set_Virtual_SI	0x1e
+#define Hit_Set_Virtual_SD	0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S	0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T	0x16
+
+/*
+ * R1000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S	0x03
+#define Index_Load_Tag_S	0x07
+#define Index_Store_Tag_S	0x0B
+#define Hit_Invalidate_S	0x13
+#define Cache_Barrier		0x14
+#define Hit_Writeback_Inv_S	0x17
+#define Index_Load_Data_I	0x18
+#define Index_Load_Data_D	0x19
+#define Index_Load_Data_S	0x1b
+#define Index_Store_Data_I	0x1c
+#define Index_Store_Data_D	0x1d
+#define Index_Store_Data_S	0x1f
+
+#endif	/* __ASM_CACHEOPS_H */
diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h
new file mode 100644
index 000000000000..c25cc92b9950
--- /dev/null
+++ b/include/asm-mips/checksum.h
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Thiemo Seufer.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/config.h>
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, int len,
+                                         unsigned int sum, int *errp);
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline unsigned int csum_and_copy_to_user (const unsigned char *src,
+						  unsigned char __user *dst,
+						  int len, int sum,
+						  int *err_ptr)
+{
+	might_sleep();
+	sum = csum_partial(src, len, sum);
+
+	if (copy_to_user(dst, src, len)) {
+		*err_ptr = -EFAULT;
+		return -1;
+	}
+
+	return sum;
+}
+
+/*
+ * the same as csum_partial, but copies from user space (but on MIPS
+ * we have just one address space, so this is identical to the above)
+ */
+unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst,
+				       int len, unsigned int sum);
+
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+static inline unsigned short int csum_fold(unsigned int sum)
+{
+	__asm__(
+	".set\tnoat\t\t\t# csum_fold\n\t"
+	"sll\t$1,%0,16\n\t"
+	"addu\t%0,$1\n\t"
+	"sltu\t$1,%0,$1\n\t"
+	"srl\t%0,%0,16\n\t"
+	"addu\t%0,$1\n\t"
+	"xori\t%0,0xffff\n\t"
+	".set\tat"
+	: "=r" (sum)
+	: "0" (sum));
+
+	return sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+	unsigned int *word = (unsigned int *) iph;
+	unsigned int *stop = word + ihl;
+	unsigned int csum;
+	int carry;
+
+	csum = word[0];
+	csum += word[1];
+	carry = (csum < word[1]);
+	csum += carry;
+
+	csum += word[2];
+	carry = (csum < word[2]);
+	csum += carry;
+
+	csum += word[3];
+	carry = (csum < word[3]);
+	csum += carry;
+
+	word += 4;
+	do {
+		csum += *word;
+		carry = (csum < *word);
+		csum += carry;
+		word++;
+	} while (word != stop);
+
+	return csum_fold(csum);
+}
+
+static inline unsigned int csum_tcpudp_nofold(unsigned long saddr,
+	unsigned long daddr, unsigned short len, unsigned short proto,
+	unsigned int sum)
+{
+	__asm__(
+	".set\tnoat\t\t\t# csum_tcpudp_nofold\n\t"
+#ifdef CONFIG_MIPS32
+	"addu\t%0, %2\n\t"
+	"sltu\t$1, %0, %2\n\t"
+	"addu\t%0, $1\n\t"
+
+	"addu\t%0, %3\n\t"
+	"sltu\t$1, %0, %3\n\t"
+	"addu\t%0, $1\n\t"
+
+	"addu\t%0, %4\n\t"
+	"sltu\t$1, %0, %4\n\t"
+	"addu\t%0, $1\n\t"
+#endif
+#ifdef CONFIG_MIPS64
+	"daddu\t%0, %2\n\t"
+	"daddu\t%0, %3\n\t"
+	"daddu\t%0, %4\n\t"
+	"dsll32\t$1, %0, 0\n\t"
+	"daddu\t%0, $1\n\t"
+	"dsrl32\t%0, %0, 0\n\t"
+#endif
+	".set\tat"
+	: "=r" (sum)
+	: "0" (daddr), "r"(saddr),
+#ifdef __MIPSEL__
+	  "r" (((unsigned long)htons(len)<<16) + proto*256),
+#else
+	  "r" (((unsigned long)(proto)<<16) + len),
+#endif
+	  "r" (sum));
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						     struct in6_addr *daddr,
+						     __u32 len,
+						     unsigned short proto,
+						     unsigned int sum)
+{
+	__asm__(
+	".set\tpush\t\t\t# csum_ipv6_magic\n\t"
+	".set\tnoreorder\n\t"
+	".set\tnoat\n\t"
+	"addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
+	"sltu\t$1, %0, %5\n\t"
+	"addu\t%0, $1\n\t"
+
+	"addu\t%0, %6\t\t\t# csum\n\t"
+	"sltu\t$1, %0, %6\n\t"
+	"lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 4(%2)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 8(%2)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 12(%2)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 0(%3)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 4(%3)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 8(%3)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"lw\t%1, 12(%3)\n\t"
+	"addu\t%0, $1\n\t"
+	"addu\t%0, %1\n\t"
+	"sltu\t$1, %0, %1\n\t"
+
+	"addu\t%0, $1\t\t\t# Add final carry\n\t"
+	".set\tpop"
+	: "=r" (sum), "=r" (proto)
+	: "r" (saddr), "r" (daddr),
+	  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h
new file mode 100644
index 000000000000..ca1fbc0579fe
--- /dev/null
+++ b/include/asm-mips/cobalt/cobalt.h
@@ -0,0 +1,90 @@
+/*
+ * Lowlevel hardware stuff for the MIPS based Cobalt microservers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
+ */
+#ifndef __ASM_COBALT_H
+#define __ASM_COBALT_H
+
+/*
+ * i8259 legacy interrupts used on Cobalt:
+ *
+ *     8  - RTC
+ *     9  - PCI
+ *    14  - IDE0
+ *    15  - IDE1
+ *
+ * CPU IRQs  are 16 ... 23
+ */
+#define COBALT_TIMER_IRQ	18
+#define COBALT_SCC_IRQ          19		/* pre-production has 85C30 */
+#define COBALT_RAQ_SCSI_IRQ	19
+#define COBALT_ETH0_IRQ		19
+#define COBALT_ETH1_IRQ		20
+#define COBALT_SERIAL_IRQ	21
+#define COBALT_SCSI_IRQ         21
+#define COBALT_VIA_IRQ		22		/* Chained to VIA ISA bridge */
+#define COBALT_QUBE_SLOT_IRQ	23
+
+/*
+ * PCI configuration space manifest constants.  These are wired into
+ * the board layout according to the PCI spec to enable the software
+ * to probe the hardware configuration space in a well defined manner.
+ *
+ * The PCI_DEVSHFT() macro transforms these values into numbers
+ * suitable for passing as the dev parameter to the various
+ * pcibios_read/write_config routines.
+ */
+#define COBALT_PCICONF_CPU      0x06
+#define COBALT_PCICONF_ETH0     0x07
+#define COBALT_PCICONF_RAQSCSI  0x08
+#define COBALT_PCICONF_VIA      0x09
+#define COBALT_PCICONF_PCISLOT  0x0A
+#define COBALT_PCICONF_ETH1     0x0C
+
+
+/*
+ * The Cobalt board id information.  The boards have an ID number wired
+ * into the VIA that is available in the high nibble of register 94.
+ * This register is available in the VIA configuration space through the
+ * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
+ */
+#define VIA_COBALT_BRD_ID_REG  0x94
+#define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
+#define COBALT_BRD_ID_QUBE1    0x3
+#define COBALT_BRD_ID_RAQ1     0x4
+#define COBALT_BRD_ID_QUBE2    0x5
+#define COBALT_BRD_ID_RAQ2     0x6
+
+/*
+ * Galileo chipset access macros for the Cobalt. The base address for
+ * the GT64111 chip is 0x14000000
+ *
+ * Most of this really should go into a separate GT64111 header file.
+ */
+#define GT64111_IO_BASE		0x10000000UL
+#define GT64111_BASE		0x14000000UL
+#define GALILEO_REG(ofs)	(KSEG0 + GT64111_BASE + (unsigned long)(ofs))
+
+#define GALILEO_INL(port)	(*(volatile unsigned int *) GALILEO_REG(port))
+#define GALILEO_OUTL(val, port)						\
+do {									\
+	*(volatile unsigned int *) GALILEO_REG(port) = (port);		\
+} while (0)
+
+#define GALILEO_T0EXP		0x0100
+#define GALILEO_ENTC0		0x01
+#define GALILEO_SELTC0		0x02
+
+#define PCI_CFG_SET(devfn,where)					\
+	GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) |		\
+		(PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
+
+
+#endif /* __ASM_COBALT_H */
diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
new file mode 100644
index 000000000000..dce92079e7fc
--- /dev/null
+++ b/include/asm-mips/compat.h
@@ -0,0 +1,144 @@
+#ifndef _ASM_COMPAT_H
+#define _ASM_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_suseconds_t;
+
+typedef s32		compat_pid_t;
+typedef s32		compat_uid_t;
+typedef s32		compat_gid_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u32		compat_nlink_t;
+typedef s32		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef s32		compat_caddr_t;
+typedef struct {
+	s32	val[2];
+} compat_fsid_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	s32		st_pad1[3];
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	s32		st_pad2[2];
+	compat_off_t	st_size;
+	s32		st_pad3;
+	compat_time_t	st_atime;
+	s32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	s32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	s32		st_ctime_nsec;
+	s32		st_blksize;
+	s32		st_blocks;
+	s32		st_pad4[14];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	s32		l_sysid;
+	compat_pid_t	l_pid;
+	short		__unused;
+	s32		pad[4];
+};
+
+#define F_GETLK64	33
+#define F_SETLK64	34
+#define F_SETLKW64	35
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_frsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_files;
+	int		f_ffree;
+	int		f_bavail;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;
+	int		f_spare[6];
+};
+
+#define COMPAT_RLIM_INFINITY	0x7fffffffUL
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...  */
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef u32		compat_uptr_t;
+
+static inline void *compat_ptr(compat_uptr_t uptr)
+{
+	return (void *)(long)uptr;
+}
+
+static inline void *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = (struct pt_regs *)
+		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
+
+	return (void *) (regs->regs[29] - len);
+}
+#if defined (__MIPSEL__)
+#define __COMPAT_ENDIAN_SWAP__ 	1
+#endif
+
+#endif /* _ASM_COMPAT_H */
diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h
new file mode 100644
index 000000000000..169ae26105e9
--- /dev/null
+++ b/include/asm-mips/compiler.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004  Maciej W. Rozycki
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_COMPILER_H
+#define _ASM_COMPILER_H
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+#define GCC_REG_ACCUM "$0"
+#else
+#define GCC_REG_ACCUM "accum"
+#endif
+
+#endif /* _ASM_COMPILER_H */
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
new file mode 100644
index 000000000000..1df2c299de82
--- /dev/null
+++ b/include/asm-mips/cpu-features.h
@@ -0,0 +1,159 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_CPU_FEATURES_H
+#define __ASM_CPU_FEATURES_H
+
+#include <linux/config.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <cpu-feature-overrides.h>
+
+/*
+ * SMP assumption: Options of CPU 0 are a superset of all processors.
+ * This is true for all known MIPS systems.
+ */
+#ifndef cpu_has_tlb
+#define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
+#endif
+#ifndef cpu_has_4kex
+#define cpu_has_4kex		(cpu_data[0].options & MIPS_CPU_4KEX)
+#endif
+#ifndef cpu_has_4ktlb
+#define cpu_has_4ktlb		(cpu_data[0].options & MIPS_CPU_4KTLB)
+#endif
+#ifndef cpu_has_fpu
+#define cpu_has_fpu		(cpu_data[0].options & MIPS_CPU_FPU)
+#endif
+#ifndef cpu_has_32fpr
+#define cpu_has_32fpr		(cpu_data[0].options & MIPS_CPU_32FPR)
+#endif
+#ifndef cpu_has_counter
+#define cpu_has_counter		(cpu_data[0].options & MIPS_CPU_COUNTER)
+#endif
+#ifndef cpu_has_watch
+#define cpu_has_watch		(cpu_data[0].options & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16		(cpu_data[0].options & MIPS_CPU_MIPS16)
+#endif
+#ifndef cpu_has_divec
+#define cpu_has_divec		(cpu_data[0].options & MIPS_CPU_DIVEC)
+#endif
+#ifndef cpu_has_vce
+#define cpu_has_vce		(cpu_data[0].options & MIPS_CPU_VCE)
+#endif
+#ifndef cpu_has_cache_cdex_p
+#define cpu_has_cache_cdex_p	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P)
+#endif
+#ifndef cpu_has_cache_cdex_s
+#define cpu_has_cache_cdex_s	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S)
+#endif
+#ifndef cpu_has_prefetch
+#define cpu_has_prefetch	(cpu_data[0].options & MIPS_CPU_PREFETCH)
+#endif
+#ifndef cpu_has_mcheck
+#define cpu_has_mcheck		(cpu_data[0].options & MIPS_CPU_MCHECK)
+#endif
+#ifndef cpu_has_ejtag
+#define cpu_has_ejtag		(cpu_data[0].options & MIPS_CPU_EJTAG)
+#endif
+#ifndef cpu_has_llsc
+#define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
+#endif
+#ifndef cpu_has_vtag_icache
+#define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
+#endif
+#ifndef cpu_has_dc_aliases
+#define cpu_has_dc_aliases	(cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES)
+#endif
+#ifndef cpu_has_ic_fills_f_dc
+#define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
+#endif
+
+/*
+ * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+ * such as the R10000 have I-Caches that snoop local stores; the embedded ones
+ * don't.  For maintaining I-cache coherency this means we need to flush the
+ * D-cache all the way back to whever the I-cache does refills from, so the
+ * I-cache has a chance to see the new data at all.  Then we have to flush the
+ * I-cache also.
+ * Note we may have been rescheduled and may no longer be running on the CPU
+ * that did the store so we can't optimize this into only doing the flush on
+ * the local CPU.
+ */
+#ifndef cpu_icache_snoops_remote_store
+#ifdef CONFIG_SMP
+#define cpu_icache_snoops_remote_store	(cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE)
+#else
+#define cpu_icache_snoops_remote_store	1
+#endif
+#endif
+
+/*
+ * Certain CPUs may throw bizarre exceptions if not the whole cacheline
+ * contains valid instructions.  For these we ensure proper alignment of
+ * signal trampolines and pad them to the size of a full cache lines with
+ * nops.  This is also used in structure definitions so can't be a test macro
+ * like the others.
+ */
+#ifndef PLAT_TRAMPOLINE_STUFF_LINE
+#define PLAT_TRAMPOLINE_STUFF_LINE	0UL
+#endif
+
+#ifdef CONFIG_MIPS32
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex	(cpu_data[0].options & MIPS_CPU_NOFPUEX)
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg	(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		0
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	0
+# endif
+#endif
+
+#ifdef CONFIG_MIPS64
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex		0
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits			1
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg		1
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		1
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	1
+# endif
+#endif
+
+#ifndef cpu_has_subset_pcaches
+#define cpu_has_subset_pcaches	(cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
+#endif
+
+#ifndef cpu_dcache_line_size
+#define cpu_dcache_line_size()	current_cpu_data.dcache.linesz
+#endif
+#ifndef cpu_icache_line_size
+#define cpu_icache_line_size()	current_cpu_data.icache.linesz
+#endif
+#ifndef cpu_scache_line_size
+#define cpu_scache_line_size()	current_cpu_data.scache.linesz
+#endif
+
+#endif /* __ASM_CPU_FEATURES_H */
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
new file mode 100644
index 000000000000..20a35b15a31d
--- /dev/null
+++ b/include/asm-mips/cpu-info.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_CPU_INFO_H
+#define __ASM_CPU_INFO_H
+
+#include <linux/config.h>
+#include <asm/cache.h>
+
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/types.h>
+#endif
+
+/*
+ * Descriptor for a cache
+ */
+struct cache_desc {
+	unsigned short linesz;	/* Size of line in bytes */
+	unsigned short ways;	/* Number of ways */
+	unsigned short sets;	/* Number of lines per set */
+	unsigned int waysize;	/* Bytes per way */
+	unsigned int waybit;	/* Bits to select in a cache set */
+	unsigned int flags;	/* Flags describing cache properties */
+};
+
+/*
+ * Flag definitions
+ */
+#define MIPS_CACHE_NOT_PRESENT	0x00000001
+#define MIPS_CACHE_VTAG		0x00000002	/* Virtually tagged cache */
+#define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
+#define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
+#define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+
+struct cpuinfo_mips {
+	unsigned long		udelay_val;
+	unsigned long		asid_cache;
+#if defined(CONFIG_SGI_IP27)
+//	cpuid_t		p_cpuid;	/* PROM assigned cpuid */
+	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
+	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
+	unsigned char	p_slice;	/* Physical position on node board */
+#endif
+#if 0
+	unsigned long		loops_per_sec;
+	unsigned long		ipi_count;
+	unsigned long		irq_attempt[NR_IRQS];
+	unsigned long		smp_local_irq_count;
+	unsigned long		prof_multiplier;
+	unsigned long		prof_counter;
+#endif
+
+	/*
+	 * Capability and feature descriptor structure for MIPS CPU
+	 */
+	unsigned long		options;
+	unsigned int		processor_id;
+	unsigned int		fpu_id;
+	unsigned int		cputype;
+	int			isa_level;
+	int			tlbsize;
+	struct cache_desc	icache;	/* Primary I-cache */
+	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
+	struct cache_desc	scache;	/* Secondary cache */
+	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
+	void 			*data;	/* Additional data */
+} __attribute__((aligned(SMP_CACHE_BYTES)));
+
+extern struct cpuinfo_mips cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+
+extern void cpu_probe(void);
+extern void cpu_report(void);
+
+#endif /* __ASM_CPU_INFO_H */
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
new file mode 100644
index 000000000000..dec060b49556
--- /dev/null
+++ b/include/asm-mips/cpu.h
@@ -0,0 +1,222 @@
+/*
+ * cpu.h: Values of the PRId register used to match up
+ *        various MIPS cpu types.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ */
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* Assigned Company values for bits 23:16 of the PRId Register
+   (CP0 register 15, select 0).  As of the MIPS32 and MIPS64 specs from
+   MTI, the PRId register is defined in this (backwards compatible)
+   way:
+
+  +----------------+----------------+----------------+----------------+
+  | Company Options| Company ID     | Processor ID   | Revision       |
+  +----------------+----------------+----------------+----------------+
+   31            24 23            16 15             8 7
+
+   I don't have docs for all the previous processors, but my impression is
+   that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
+   spec.
+*/
+
+#define PRID_COMP_LEGACY       0x000000
+#define PRID_COMP_MIPS         0x010000
+#define PRID_COMP_BROADCOM     0x020000
+#define PRID_COMP_ALCHEMY      0x030000
+#define PRID_COMP_SIBYTE       0x040000
+#define PRID_COMP_SANDCRAFT    0x050000
+
+/*
+ * Assigned values for the product ID register.  In order to detect a
+ * certain CPU type exactly eventually additional registers may need to
+ * be examined.  These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+#define PRID_IMP_R2000		0x0100
+#define PRID_IMP_AU1_REV1	0x0100
+#define PRID_IMP_AU1_REV2	0x0200
+#define PRID_IMP_R3000		0x0200		/* Same as R2000A  */
+#define PRID_IMP_R6000		0x0300		/* Same as R3000A  */
+#define PRID_IMP_R4000		0x0400
+#define PRID_IMP_R6000A		0x0600
+#define PRID_IMP_R10000		0x0900
+#define PRID_IMP_R4300		0x0b00
+#define PRID_IMP_VR41XX		0x0c00
+#define PRID_IMP_R12000		0x0e00
+#define PRID_IMP_R8000		0x1000
+#define PRID_IMP_R4600		0x2000
+#define PRID_IMP_R4700		0x2100
+#define PRID_IMP_TX39		0x2200
+#define PRID_IMP_R4640		0x2200
+#define PRID_IMP_R4650		0x2200		/* Same as R4640 */
+#define PRID_IMP_R5000		0x2300
+#define PRID_IMP_TX49		0x2d00
+#define PRID_IMP_SONIC		0x2400
+#define PRID_IMP_MAGIC		0x2500
+#define PRID_IMP_RM7000		0x2700
+#define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
+#define PRID_IMP_RM9000		0x3400
+#define PRID_IMP_R5432		0x5400
+#define PRID_IMP_R5500		0x5500
+#define PRID_IMP_4KC		0x8000
+#define PRID_IMP_5KC		0x8100
+#define PRID_IMP_20KC		0x8200
+#define PRID_IMP_4KEC		0x8400
+#define PRID_IMP_4KSC		0x8600
+#define PRID_IMP_25KF		0x8800
+#define PRID_IMP_5KE		0x8900
+#define PRID_IMP_4KECR2		0x9000
+#define PRID_IMP_4KEMPR2	0x9100
+#define PRID_IMP_4KSD		0x9200
+#define PRID_IMP_24K		0x9300
+
+#define PRID_IMP_UNKNOWN	0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
+ */
+
+#define PRID_IMP_SB1            0x0100
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
+ */
+
+#define PRID_IMP_SR71000        0x0400
+
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
+
+#define PRID_REV_TX4927		0x0022
+#define PRID_REV_TX4937		0x0030
+#define PRID_REV_R4400		0x0040
+#define PRID_REV_R3000A		0x0030
+#define PRID_REV_R3000		0x0020
+#define PRID_REV_R2000A		0x0010
+#define PRID_REV_TX3912 	0x0010
+#define PRID_REV_TX3922 	0x0030
+#define PRID_REV_TX3927 	0x0040
+#define PRID_REV_VR4111		0x0050
+#define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
+#define PRID_REV_VR4121		0x0060
+#define PRID_REV_VR4122		0x0070
+#define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
+#define PRID_REV_VR4130		0x0080
+
+/*
+ * FPU implementation/revision register (CP1 control register 0).
+ *
+ * +---------------------------------+----------------+----------------+
+ * | 0                               | Implementation | Revision       |
+ * +---------------------------------+----------------+----------------+
+ *  31                             16 15             8 7              0
+ */
+
+#define FPIR_IMP_NONE		0x0000
+
+#define CPU_UNKNOWN		 0
+#define CPU_R2000		 1
+#define CPU_R3000		 2
+#define CPU_R3000A		 3
+#define CPU_R3041		 4
+#define CPU_R3051		 5
+#define CPU_R3052		 6
+#define CPU_R3081		 7
+#define CPU_R3081E		 8
+#define CPU_R4000PC		 9
+#define CPU_R4000SC		10
+#define CPU_R4000MC		11
+#define CPU_R4200		12
+#define CPU_R4400PC		13
+#define CPU_R4400SC		14
+#define CPU_R4400MC		15
+#define CPU_R4600		16
+#define CPU_R6000		17
+#define CPU_R6000A		18
+#define CPU_R8000		19
+#define CPU_R10000		20
+#define CPU_R12000		21
+#define CPU_R4300		22
+#define CPU_R4650		23
+#define CPU_R4700		24
+#define CPU_R5000		25
+#define CPU_R5000A		26
+#define CPU_R4640		27
+#define CPU_NEVADA		28
+#define CPU_RM7000		29
+#define CPU_R5432		30
+#define CPU_4KC			31
+#define CPU_5KC			32
+#define CPU_R4310		33
+#define CPU_SB1			34
+#define CPU_TX3912		35
+#define CPU_TX3922		36
+#define CPU_TX3927		37
+#define CPU_AU1000		38
+#define CPU_4KEC		39
+#define CPU_4KSC		40
+#define CPU_VR41XX		41
+#define CPU_R5500		42
+#define CPU_TX49XX		43
+#define CPU_AU1500		44
+#define CPU_20KC		45
+#define CPU_VR4111		46
+#define CPU_VR4121		47
+#define CPU_VR4122		48
+#define CPU_VR4131		49
+#define CPU_VR4181		50
+#define CPU_VR4181A		51
+#define CPU_AU1100		52
+#define CPU_SR71000		53
+#define CPU_RM9000		54
+#define CPU_25KF		55
+#define CPU_VR4133		56
+#define CPU_AU1550		57
+#define CPU_24K			58
+#define CPU_LAST		58
+
+/*
+ * ISA Level encodings
+ *
+ */
+#define MIPS_CPU_ISA_I		0x00000001
+#define MIPS_CPU_ISA_II		0x00000002
+#define MIPS_CPU_ISA_III	0x00008003
+#define MIPS_CPU_ISA_IV		0x00008004
+#define MIPS_CPU_ISA_V		0x00008005
+#define MIPS_CPU_ISA_M32	0x00000020
+#define MIPS_CPU_ISA_M64	0x00008040
+
+/*
+ * Bit 15 encodes if an ISA level supports 64-bit operations.
+ */
+#define MIPS_CPU_ISA_64BIT	0x00008000
+
+/*
+ * CPU Option encodings
+ */
+#define MIPS_CPU_TLB		0x00000001 /* CPU has TLB */
+/* Leave a spare bit for variant MMU types... */
+#define MIPS_CPU_4KEX		0x00000004 /* "R4K" exception model */
+#define MIPS_CPU_4KTLB		0x00000008 /* "R4K" TLB handler */
+#define MIPS_CPU_FPU		0x00000010 /* CPU has FPU */
+#define MIPS_CPU_32FPR		0x00000020 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER	0x00000040 /* Cycle count/compare */
+#define MIPS_CPU_WATCH		0x00000080 /* watchpoint registers */
+#define MIPS_CPU_MIPS16		0x00000100 /* code compression */
+#define MIPS_CPU_DIVEC		0x00000200 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE		0x00000400 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P	0x00000800 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S	0x00001000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK		0x00002000 /* Machine check exception */
+#define MIPS_CPU_EJTAG		0x00004000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX	0x00008000 /* no FPU exception */
+#define MIPS_CPU_LLSC		0x00010000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_SUBSET_CACHES	0x00020000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH	0x00040000 /* CPU has usable prefetch */
+
+#endif /* _ASM_CPU_H */
diff --git a/include/asm-mips/cputime.h b/include/asm-mips/cputime.h
new file mode 100644
index 000000000000..c00eacbdd979
--- /dev/null
+++ b/include/asm-mips/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __MIPS_CPUTIME_H
+#define __MIPS_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __MIPS_CPUTIME_H */
diff --git a/include/asm-mips/current.h b/include/asm-mips/current.h
new file mode 100644
index 000000000000..559db66b9790
--- /dev/null
+++ b/include/asm-mips/current.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2002 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current		get_current()
+
+#endif /* _ASM_CURRENT_H */
diff --git a/include/asm-mips/ddb5074.h b/include/asm-mips/ddb5074.h
new file mode 100644
index 000000000000..0d09ac27f9a5
--- /dev/null
+++ b/include/asm-mips/ddb5074.h
@@ -0,0 +1,11 @@
+/*
+ *  include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ */
+
+extern void ddb5074_led_hex(int hex);
+extern void ddb5074_led_d2(int on);
+extern void ddb5074_led_d3(int on);
+
diff --git a/include/asm-mips/ddb5xxx/ddb5074.h b/include/asm-mips/ddb5xxx/ddb5074.h
new file mode 100644
index 000000000000..58d88306af65
--- /dev/null
+++ b/include/asm-mips/ddb5xxx/ddb5074.h
@@ -0,0 +1,38 @@
+/*
+ *  include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ */
+
+#ifndef _ASM_DDB5XXX_DDB5074_H
+#define _ASM_DDB5XXX_DDB5074_H
+
+#include <asm/nile4.h>
+
+#define DDB_SDRAM_SIZE      0x04000000      /* 64MB */
+
+#define DDB_PCI_IO_BASE     0x06000000
+#define DDB_PCI_IO_SIZE     0x02000000      /* 32 MB */
+
+#define DDB_PCI_MEM_BASE    0x08000000
+#define DDB_PCI_MEM_SIZE    0x08000000  /* 128 MB */
+
+#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE
+#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE
+
+#define NILE4_PCI_IO_BASE   0xa6000000
+#define NILE4_PCI_MEM_BASE  0xa8000000
+#define NILE4_PCI_CFG_BASE  NILE4_PCI_MEM_BASE
+#define DDB_PCI_IACK_BASE NILE4_PCI_IO_BASE
+
+#define NILE4_IRQ_BASE NUM_I8259_INTERRUPTS
+#define CPU_IRQ_BASE (NUM_NILE4_INTERRUPTS + NILE4_IRQ_BASE)
+#define CPU_NILE4_CASCADE 2
+
+extern void ddb5074_led_hex(int hex);
+extern void ddb5074_led_d2(int on);
+extern void ddb5074_led_d3(int on);
+
+extern void nile4_irq_setup(u32 base);
+#endif
diff --git a/include/asm-mips/ddb5xxx/ddb5476.h b/include/asm-mips/ddb5xxx/ddb5476.h
new file mode 100644
index 000000000000..4c23390d9354
--- /dev/null
+++ b/include/asm-mips/ddb5xxx/ddb5476.h
@@ -0,0 +1,157 @@
+/*
+ * header file specific for ddb5476
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/*
+ *  Memory map (physical address)
+ *
+ *  Note most of the following address must be properly aligned by the
+ *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
+ *  PCI_IO_BASE must be aligned along 16MB boundary.
+ */
+#define DDB_SDRAM_BASE		0x00000000
+#define DDB_SDRAM_SIZE		0x04000000      /* 64MB */
+
+#define	DDB_DCS3_BASE		0x04000000	/* flash 1 */
+#define	DDB_DCS3_SIZE		0x01000000	/* 16MB */
+
+#define	DDB_DCS2_BASE		0x05000000	/* flash 2 */
+#define	DDB_DCS2_SIZE		0x01000000	/* 16MB */
+
+#define DDB_PCI_IO_BASE		0x06000000
+#define DDB_PCI_IO_SIZE		0x02000000      /* 32 MB */
+
+#define	DDB_PCI_MEM_BASE	0x08000000
+#define	DDB_PCI_MEM_SIZE	0x08000000	/* 128 MB */
+
+#define	DDB_DCS5_BASE		0x13000000	/* DDB status regs */
+#define	DDB_DCS5_SIZE		0x00200000	/* 2MB, 8-bit */
+
+#define	DDB_DCS4_BASE		0x14000000	/* DDB control regs */
+#define	DDB_DCS4_SIZE		0x00200000	/* 2MB, 8-bit */
+
+#define DDB_INTCS_BASE		0x1fa00000      /* VRC5476 control regs */
+#define DDB_INTCS_SIZE		0x00200000      /* 2MB */
+
+#define DDB_BOOTCS_BASE         0x1fc00000      /* Boot ROM / EPROM /Flash */
+#define DDB_BOOTCS_SIZE         0x00200000      /* 2 MB - doc says 4MB */
+
+
+/* aliases */
+#define	DDB_PCI_CONFIG_BASE	DDB_PCI_MEM_BASE
+#define	DDB_PCI_CONFIG_SIZE	DDB_PCI_MEM_SIZE
+
+/* PCI intr ack share PCIW0 with PCI IO */
+#define	DDB_PCI_IACK_BASE	DDB_PCI_IO_BASE
+
+/*
+ * Interrupt mapping
+ *
+ * We have three interrupt controllers:
+ *
+ *   . CPU itself - 8 sources
+ *   . i8259 - 16 sources
+ *   . vrc5476 - 16 sources
+ *
+ *  They connected as follows:
+ *    all vrc5476 interrupts are routed to cpu IP2 (by software setting)
+ *    all i2869 are routed to INTC in vrc5476 (by hardware connection)
+ *
+ *  All VRC5476 PCI interrupts are level-triggered (no ack needed).
+ *  All PCI irq but INTC are active low.
+ */
+
+/*
+ * irq number block assignment
+ */
+
+#define	NUM_CPU_IRQ		8
+#define	NUM_I8259_IRQ		16
+#define	NUM_VRC5476_IRQ		16
+
+#define	DDB_IRQ_BASE		0
+
+#define	I8259_IRQ_BASE		DDB_IRQ_BASE
+#define	VRC5476_IRQ_BASE	(I8259_IRQ_BASE + NUM_I8259_IRQ)
+#define	CPU_IRQ_BASE		(VRC5476_IRQ_BASE + NUM_VRC5476_IRQ)
+
+/*
+ * vrc5476 irq defs, see page 52-64 of Vrc5074 system controller manual
+ */
+
+#define VRC5476_IRQ_CPCE	0	/* cpu parity error */
+#define VRC5476_IRQ_CNTD	1	/* cpu no target */
+#define VRC5476_IRQ_MCE		2	/* memory check error */
+#define VRC5476_IRQ_DMA		3	/* DMA */
+#define VRC5476_IRQ_UART	4	/* vrc5476 builtin UART, not used */
+#define VRC5476_IRQ_WDOG	5	/* watchdog timer */
+#define VRC5476_IRQ_GPT		6	/* general purpose timer */
+#define VRC5476_IRQ_LBRT	7	/* local bus read timeout */
+#define VRC5476_IRQ_INTA	8	/* PCI INT #A */
+#define VRC5476_IRQ_INTB	9	/* PCI INT #B */
+#define VRC5476_IRQ_INTC	10	/* PCI INT #C */
+#define VRC5476_IRQ_INTD	11	/* PCI INT #D */
+#define VRC5476_IRQ_INTE	12	/* PCI INT #E */
+#define VRC5476_IRQ_RESERVED_13	13	/* reserved  */
+#define VRC5476_IRQ_PCIS	14	/* PCI SERR #  */
+#define VRC5476_IRQ_PCI		15	/* PCI internal error */
+
+/*
+ * i2859 irq assignment
+ */
+#define I8259_IRQ_RESERVED_0	0
+#define I8259_IRQ_KEYBOARD	1	/* M1543 default */
+#define I8259_IRQ_CASCADE	2
+#define I8259_IRQ_UART_B	3	/* M1543 default, may conflict with RTC according to schematic diagram  */
+#define I8259_IRQ_UART_A	4	/* M1543 default */
+#define I8259_IRQ_PARALLEL	5	/* M1543 default */
+#define I8259_IRQ_RESERVED_6	6
+#define I8259_IRQ_RESERVED_7	7
+#define I8259_IRQ_RTC		8	/* who set this? */
+#define I8259_IRQ_USB		9	/* ddb_setup */
+#define I8259_IRQ_PMU		10	/* ddb_setup */
+#define I8259_IRQ_RESERVED_11	11
+#define I8259_IRQ_RESERVED_12	12	/* m1543_irq_setup */
+#define I8259_IRQ_RESERVED_13	13
+#define I8259_IRQ_HDC1		14	/* default and ddb_setup */
+#define I8259_IRQ_HDC2		15	/* default */
+
+
+/*
+ * misc
+ */
+#define	VRC5476_I8259_CASCADE	VRC5476_IRQ_INTC
+#define	CPU_VRC5476_CASCADE	2
+
+#define is_i8259_irq(irq)       ((irq) < NUM_I8259_IRQ)
+#define nile4_to_irq(n)         ((n)+NUM_I8259_IRQ)
+#define irq_to_nile4(n)         ((n)-NUM_I8259_IRQ)
+
+/*
+ * low-level irq functions
+ */
+#ifndef __ASSEMBLY__
+extern void nile4_map_irq(int nile4_irq, int cpu_irq);
+extern void nile4_map_irq_all(int cpu_irq);
+extern void nile4_enable_irq(int nile4_irq);
+extern void nile4_disable_irq(int nile4_irq);
+extern void nile4_disable_irq_all(void);
+extern u16 nile4_get_irq_stat(int cpu_irq);
+extern void nile4_enable_irq_output(int cpu_irq);
+extern void nile4_disable_irq_output(int cpu_irq);
+extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
+extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
+extern void nile4_clear_irq(int nile4_irq);
+extern void nile4_clear_irq_mask(u32 mask);
+extern u8 nile4_i8259_iack(void);
+extern void nile4_dump_irq_status(void);        /* Debug */
+#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h
new file mode 100644
index 000000000000..ae3e2a38fd5f
--- /dev/null
+++ b/include/asm-mips/ddb5xxx/ddb5477.h
@@ -0,0 +1,346 @@
+/***********************************************************************
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * include/asm-mips/ddb5xxx/ddb5477.h
+ *     DDB 5477 specific definitions and macros.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ ***********************************************************************
+ */
+
+#ifndef __ASM_DDB5XXX_DDB5477_H
+#define __ASM_DDB5XXX_DDB5477_H
+
+#include <linux/config.h>
+
+/*
+ * This contains macros that are specific to DDB5477 or renamed from
+ * DDB5476.
+ */
+
+/*
+ * renamed PADRs
+ */
+#define	DDB_LCS0	DDB_DCS2
+#define	DDB_LCS1	DDB_DCS3
+#define	DDB_LCS2	DDB_DCS4
+#define	DDB_VRC5477	DDB_INTCS
+
+/*
+ * New CPU interface registers
+ */
+#define	DDB_INTCTRL0	0x0400	/* Interrupt Control 0 */
+#define	DDB_INTCTRL1	0x0404	/* Interrupt Control 1 */
+#define	DDB_INTCTRL2	0x0408	/* Interrupt Control 2 */
+#define	DDB_INTCTRL3	0x040c	/* Interrupt Control 3 */
+
+#define	DDB_INT0STAT	0x0420 	/* INT0 Status [R] */
+#define	DDB_INT1STAT	0x0428 	/* INT1 Status [R] */
+#define	DDB_INT2STAT	0x0430 	/* INT2 Status [R] */
+#define	DDB_INT3STAT	0x0438 	/* INT3 Status [R] */
+#define	DDB_INT4STAT	0x0440 	/* INT4 Status [R] */
+#define	DDB_NMISTAT	0x0450	/* NMI Status [R] */
+
+#define	DDB_INTCLR32	0x0468	/* Interrupt Clear */
+
+#define	DDB_INTPPES0	0x0470	/* PCI0 Interrupt Control */
+#define	DDB_INTPPES1	0x0478	/* PCI1 Interrupt Control */
+
+#undef  DDB_CPUSTAT		/* duplicate in Vrc-5477 */
+#define	DDB_CPUSTAT	0x0480	/* CPU Status [R] */
+#define	DDB_BUSCTRL	0x0488	/* Internal Bus Control */
+
+
+/*
+ * Timer registers
+ */
+#define	DDB_REFCTRL_L	DDB_T0CTRL
+#define	DDB_REFCTRL_H	(DDB_T0CTRL+4)
+#define	DDB_REFCNTR	DDB_T0CNTR
+#define	DDB_SPT0CTRL_L	DDB_T1CTRL
+#define	DDB_SPT0CTRL_H	(DDB_T1CTRL+4)
+#define	DDB_SPT1CTRL_L	DDB_T2CTRL
+#define	DDB_SPT1CTRL_H	(DDB_T2CTRL+4)
+#define DDB_SPT1CNTR	DDB_T1CTRL
+#define	DDB_WDTCTRL_L	DDB_T3CTRL
+#define	DDB_WDTCTRL_H	(DDB_T3CTRL+4)
+#define	DDB_WDTCNTR	DDB_T3CNTR
+
+/*
+ * DMA registers are moved.  We don't care about it for now. TODO.
+ */
+
+/*
+ * BARs for ext PCI (PCI0)
+ */
+#undef	DDB_BARC
+#undef	DDB_BARB
+
+#define DDB_BARC0	0x0210	/* PCI0 Control */
+#define DDB_BARM010	0x0218	/* PCI0 SDRAM bank01 */
+#define	DDB_BARM230	0x0220	/* PCI0 SDRAM bank23 */
+#define	DDB_BAR00	0x0240	/* PCI0 LDCS0 */
+#define	DDB_BAR10	0x0248	/* PCI0 LDCS1 */
+#define	DDB_BAR20	0x0250	/* PCI0 LDCS2 */
+#define	DDB_BAR30	0x0258	/* PCI0 LDCS3 */
+#define	DDB_BAR40	0x0260	/* PCI0 LDCS4 */
+#define	DDB_BAR50	0x0268	/* PCI0 LDCS5 */
+#define	DDB_BARB0	0x0280	/* PCI0 BOOT */
+#define	DDB_BARP00	0x0290	/* PCI0 for IOPCI Window0 */
+#define	DDB_BARP10	0x0298	/* PCI0 for IOPCI Window1 */
+
+/*
+ * BARs for IOPIC (PCI1)
+ */
+#define DDB_BARC1	0x0610	/* PCI1 Control */
+#define DDB_BARM011	0x0618	/* PCI1 SDRAM bank01 */
+#define	DDB_BARM231	0x0620	/* PCI1 SDRAM bank23 */
+#define	DDB_BAR01	0x0640	/* PCI1 LDCS0 */
+#define	DDB_BAR11	0x0648	/* PCI1 LDCS1 */
+#define	DDB_BAR21	0x0650	/* PCI1 LDCS2 */
+#define	DDB_BAR31	0x0658	/* PCI1 LDCS3 */
+#define	DDB_BAR41	0x0660	/* PCI1 LDCS4 */
+#define	DDB_BAR51	0x0668	/* PCI1 LDCS5 */
+#define	DDB_BARB1	0x0680	/* PCI1 BOOT */
+#define	DDB_BARP01	0x0690	/* PCI1 for ext PCI Window0 */
+#define	DDB_BARP11	0x0698	/* PCI1 for ext PCI Window1 */
+
+/*
+ * Other registers for ext PCI (PCI0)
+ */
+#define	DDB_PCIINIT00	0x02f0	/* PCI0 Initiator 0 */
+#define	DDB_PCIINIT10	0x02f8	/* PCI0 Initiator 1 */
+
+#define	DDB_PCISWP0	0x02b0	/* PCI0 Swap */
+#define	DDB_PCIERR0	0x02b8	/* PCI0 Error */
+
+#define	DDB_PCICTL0_L	0x02e0	/* PCI0 Control-L */
+#define	DDB_PCICTL0_H	0x02e4	/* PCI0 Control-H */
+#define	DDB_PCIARB0_L	0x02e8	/* PCI0 Arbitration-L */
+#define	DDB_PCIARB0_H	0x02ec	/* PCI0 Arbitration-H */
+
+/*
+ * Other registers for IOPCI (PCI1)
+ */
+#define DDB_IOPCIW0	0x00d0	/* PCI Address Window 0 [R/W] */
+#define DDB_IOPCIW1	0x00d8	/* PCI Address Window 1 [R/W] */
+
+#define	DDB_PCIINIT01	0x06f0	/* PCI1 Initiator 0 */
+#define	DDB_PCIINIT11	0x06f8	/* PCI1 Initiator 1 */
+
+#define	DDB_PCISWP1	0x06b0	/* PCI1 Swap */
+#define	DDB_PCIERR1	0x06b8	/* PCI1 Error */
+
+#define	DDB_PCICTL1_L	0x06e0	/* PCI1 Control-L */
+#define	DDB_PCICTL1_H	0x06e4	/* PCI1 Control-H */
+#define	DDB_PCIARB1_L	0x06e8	/* PCI1 Arbitration-L */
+#define	DDB_PCIARB1_H	0x06ec	/* PCI1 Arbitration-H */
+
+/*
+ * Local Bus
+ */
+#define DDB_LCST0	0x0110  /* LB Chip Select Timing 0 */
+#define DDB_LCST1	0x0118  /* LB Chip Select Timing 1 */
+#undef DDB_LCST2
+#define DDB_LCST2	0x0120  /* LB Chip Select Timing 2 */
+#undef DDB_LCST3
+#undef DDB_LCST4
+#undef DDB_LCST5
+#undef DDB_LCST6
+#undef DDB_LCST7
+#undef DDB_LCST8
+#define DDB_ERRADR	0x0150  /* Error Address Register */
+#define DDB_ERRCS       0x0160
+#define DDB_BTM		0x0170  /* Boot Time Mode value */
+
+/*
+ * MISC registers
+ */
+#define DDB_GIUFUNSEL	0x4040  /* select dual-func pins */
+#define DDB_PIBMISC	0x0750	/* USB buffer enable / power saving */
+
+/*
+ *  Memory map (physical address)
+ *
+ *  Note most of the following address must be properly aligned by the
+ *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
+ *  PCI_IO_BASE must be aligned along 16MB boundary.
+ */
+
+/* the actual ram size is detected at run-time */
+#define	DDB_SDRAM_BASE		0x00000000
+#define	DDB_MAX_SDRAM_SIZE	0x08000000	/* less than 128MB */
+
+#define	DDB_PCI0_MEM_BASE	0x08000000
+#define	DDB_PCI0_MEM_SIZE	0x08000000	/* 128 MB */
+
+#define	DDB_PCI1_MEM_BASE	0x10000000
+#define	DDB_PCI1_MEM_SIZE	0x08000000	/* 128 MB */
+
+#define	DDB_PCI0_CONFIG_BASE	0x18000000
+#define	DDB_PCI0_CONFIG_SIZE	0x01000000	/* 16 MB */
+
+#define	DDB_PCI1_CONFIG_BASE	0x19000000
+#define	DDB_PCI1_CONFIG_SIZE	0x01000000	/* 16 MB */
+
+#define	DDB_PCI_IO_BASE		0x1a000000	/* we concatenate two IOs */
+#define	DDB_PCI0_IO_BASE	0x1a000000
+#define	DDB_PCI0_IO_SIZE	0x01000000	/* 16 MB */
+#define	DDB_PCI1_IO_BASE	0x1b000000
+#define	DDB_PCI1_IO_SIZE	0x01000000	/* 16 MB */
+
+#define	DDB_LCS0_BASE		0x1c000000	/* flash memory */
+#define	DDB_LCS0_SIZE		0x01000000	/* 16 MB */
+
+#define	DDB_LCS1_BASE		0x1d000000	/* misc */
+#define	DDB_LCS1_SIZE		0x01000000	/* 16 MB */
+
+#define	DDB_LCS2_BASE		0x1e000000	/* Mezzanine */
+#define	DDB_LCS2_SIZE		0x01000000	/* 16 MB */
+
+#define	DDB_VRC5477_BASE	0x1fa00000	/* VRC5477 control regs */
+#define	DDB_VRC5477_SIZE	0x00200000	/* 2MB */
+
+#define	DDB_BOOTCS_BASE		0x1fc00000	/* Boot ROM / EPROM /Flash */
+#define	DDB_BOOTCS_SIZE		0x00200000	/* 2 MB - doc says 4MB */
+
+#define	DDB_LED			DDB_LCS1_BASE + 0x10000
+
+
+/*
+ * DDB5477 specific functions
+ */
+#ifndef __ASSEMBLY__
+extern void ddb5477_irq_setup(void);
+
+/* route irq to cpu int pin */
+extern void ll_vrc5477_irq_route(int vrc5477_irq, int ip);
+
+/* low-level routine for enabling vrc5477 irq, bypassing high-level */
+extern void ll_vrc5477_irq_enable(int vrc5477_irq);
+extern void ll_vrc5477_irq_disable(int vrc5477_irq);
+#endif /* !__ASSEMBLY__ */
+
+/* PCI intr ack share PCIW0 with PCI IO */
+#define	DDB_PCI_IACK_BASE	DDB_PCI_IO_BASE
+
+/*
+ * Interrupt mapping
+ *
+ * We have three interrupt controllers:
+ *
+ *   . CPU itself - 8 sources
+ *   . i8259 - 16 sources
+ *   . vrc5477 - 32 sources
+ *
+ *  They connected as follows:
+ *    all vrc5477 interrupts are routed to cpu IP2 (by software setting)
+ *    all i8359 are routed to INTC in vrc5477 (by hardware connection)
+ *
+ *  All VRC5477 PCI interrupts are level-triggered (no ack needed).
+ *  All PCI irq but INTC are active low.
+ */
+
+/* 
+ * irq number block assignment
+ */
+
+#define	NUM_CPU_IRQ		8
+#define	NUM_I8259_IRQ		16
+#define	NUM_VRC5477_IRQ		32
+
+#define	DDB_IRQ_BASE		0
+
+#define	I8259_IRQ_BASE		DDB_IRQ_BASE
+#define	VRC5477_IRQ_BASE	(I8259_IRQ_BASE + NUM_I8259_IRQ)
+#define	CPU_IRQ_BASE		(VRC5477_IRQ_BASE + NUM_VRC5477_IRQ)
+
+/*
+ * vrc5477 irq defs
+ */
+
+#define VRC5477_IRQ_CPCE	(0 + VRC5477_IRQ_BASE)	/* cpu parity error */
+#define VRC5477_IRQ_CNTD	(1 + VRC5477_IRQ_BASE)	/* cpu no target */
+#define VRC5477_IRQ_I2C		(2 + VRC5477_IRQ_BASE)	/* I2C */
+#define VRC5477_IRQ_DMA		(3 + VRC5477_IRQ_BASE)	/* DMA */
+#define VRC5477_IRQ_UART0	(4 + VRC5477_IRQ_BASE)
+#define VRC5477_IRQ_WDOG	(5 + VRC5477_IRQ_BASE)	/* watchdog timer */
+#define VRC5477_IRQ_SPT1	(6 + VRC5477_IRQ_BASE)    /* special purpose timer 1 */
+#define VRC5477_IRQ_LBRT	(7 + VRC5477_IRQ_BASE)	/* local bus read timeout */
+#define VRC5477_IRQ_INTA	(8 + VRC5477_IRQ_BASE)	/* PCI INT #A */
+#define VRC5477_IRQ_INTB	(9 + VRC5477_IRQ_BASE)	/* PCI INT #B */
+#define VRC5477_IRQ_INTC	(10 + VRC5477_IRQ_BASE)	/* PCI INT #C */
+#define VRC5477_IRQ_INTD	(11 + VRC5477_IRQ_BASE)	/* PCI INT #D */
+#define VRC5477_IRQ_INTE	(12 + VRC5477_IRQ_BASE)	/* PCI INT #E */
+#define VRC5477_IRQ_RESERVED_13	(13 + VRC5477_IRQ_BASE)	/* reserved  */
+#define VRC5477_IRQ_PCIS	(14 + VRC5477_IRQ_BASE)	/* PCI SERR #  */
+#define VRC5477_IRQ_PCI		(15 + VRC5477_IRQ_BASE)	/* PCI internal error */
+#define VRC5477_IRQ_IOPCI_INTA	(16 + VRC5477_IRQ_BASE)      /* USB-H */
+#define VRC5477_IRQ_IOPCI_INTB	(17 + VRC5477_IRQ_BASE)      /* USB-P */
+#define VRC5477_IRQ_IOPCI_INTC	(18 + VRC5477_IRQ_BASE)      /* AC97 */
+#define VRC5477_IRQ_IOPCI_INTD	(19 + VRC5477_IRQ_BASE)      /* Reserved */
+#define VRC5477_IRQ_UART1	(20 + VRC5477_IRQ_BASE)     
+#define VRC5477_IRQ_SPT0	(21 + VRC5477_IRQ_BASE)      /* special purpose timer 0 */
+#define VRC5477_IRQ_GPT0	(22 + VRC5477_IRQ_BASE)      /* general purpose timer 0 */
+#define VRC5477_IRQ_GPT1	(23 + VRC5477_IRQ_BASE)      /* general purpose timer 1 */
+#define VRC5477_IRQ_GPT2	(24 + VRC5477_IRQ_BASE)      /* general purpose timer 2 */
+#define VRC5477_IRQ_GPT3	(25 + VRC5477_IRQ_BASE)      /* general purpose timer 3 */
+#define VRC5477_IRQ_GPIO	(26 + VRC5477_IRQ_BASE)
+#define VRC5477_IRQ_SIO0	(27 + VRC5477_IRQ_BASE)
+#define VRC5477_IRQ_SIO1        (28 + VRC5477_IRQ_BASE)
+#define VRC5477_IRQ_RESERVED_29 (29 + VRC5477_IRQ_BASE)      /* reserved */
+#define VRC5477_IRQ_IOPCISERR	(30 + VRC5477_IRQ_BASE)      /* IO PCI SERR # */
+#define VRC5477_IRQ_IOPCI	(31 + VRC5477_IRQ_BASE)
+
+/*
+ * i2859 irq assignment
+ */
+#define I8259_IRQ_RESERVED_0	(0 + I8259_IRQ_BASE)	
+#define I8259_IRQ_KEYBOARD	(1 + I8259_IRQ_BASE)	/* M1543 default */
+#define I8259_IRQ_CASCADE	(2 + I8259_IRQ_BASE)
+#define I8259_IRQ_UART_B	(3 + I8259_IRQ_BASE)	/* M1543 default, may conflict with RTC according to schematic diagram  */
+#define I8259_IRQ_UART_A	(4 + I8259_IRQ_BASE)	/* M1543 default */
+#define I8259_IRQ_PARALLEL	(5 + I8259_IRQ_BASE)	/* M1543 default */
+#define I8259_IRQ_RESERVED_6	(6 + I8259_IRQ_BASE)
+#define I8259_IRQ_RESERVED_7	(7 + I8259_IRQ_BASE)
+#define I8259_IRQ_RTC		(8 + I8259_IRQ_BASE)	/* who set this? */
+#define I8259_IRQ_USB		(9 + I8259_IRQ_BASE)	/* ddb_setup */
+#define I8259_IRQ_PMU		(10 + I8259_IRQ_BASE)	/* ddb_setup */
+#define I8259_IRQ_RESERVED_11	(11 + I8259_IRQ_BASE)
+#define I8259_IRQ_RESERVED_12	(12 + I8259_IRQ_BASE)	/* m1543_irq_setup */
+#define I8259_IRQ_RESERVED_13	(13 + I8259_IRQ_BASE)
+#define I8259_IRQ_HDC1		(14 + I8259_IRQ_BASE)	/* default and ddb_setup */
+#define I8259_IRQ_HDC2		(15 + I8259_IRQ_BASE)	/* default */
+
+
+/*
+ * misc
+ */
+#define	VRC5477_I8259_CASCADE	(VRC5477_IRQ_INTC - VRC5477_IRQ_BASE)
+#define	CPU_VRC5477_CASCADE	2
+
+/*
+ * debug routines
+ */
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_RUNTIME_DEBUG)
+extern void vrc5477_show_pdar_regs(void);
+extern void vrc5477_show_pci_regs(void);
+extern void vrc5477_show_bar_regs(void);
+extern void vrc5477_show_int_regs(void);
+extern void vrc5477_show_all_regs(void);
+#endif
+
+/*
+ * RAM size
+ */
+extern int board_ram_size;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_DDB5XXX_DDB5477_H */
diff --git a/include/asm-mips/ddb5xxx/ddb5xxx.h b/include/asm-mips/ddb5xxx/ddb5xxx.h
new file mode 100644
index 000000000000..873c03f2c5fe
--- /dev/null
+++ b/include/asm-mips/ddb5xxx/ddb5xxx.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                    Sony Software Development Center Europe (SDCE), Brussels
+ *
+ * include/asm-mips/ddb5xxx/ddb5xxx.h
+ *     Common header for all NEC DDB 5xxx boards, including 5074, 5476, 5477.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_DDB5XXX_DDB5XXX_H
+#define __ASM_DDB5XXX_DDB5XXX_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/*
+ *  This file is based on the following documentation:
+ *
+ *	NEC Vrc 5074 System Controller Data Sheet, June 1998
+ *
+ * [jsun] It is modified so that this file only contains the macros
+ * that are true for all DDB 5xxx boards.  The modification is based on
+ *
+ *	uPD31577(VRC5477) VR5432-SDRAM/PCI Bridge (Luke)
+ *	Preliminary Specification Decoment, Rev 1.1, 27 Dec, 2000
+ *
+ */
+
+
+#define DDB_BASE		0xbfa00000
+#define DDB_SIZE		0x00200000		/* 2 MB */
+
+
+/*
+ *  Physical Device Address Registers (PDARs)
+ */
+
+#define DDB_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
+#define DDB_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
+#define DDB_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
+#define DDB_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
+#define DDB_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
+#define DDB_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
+#define DDB_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
+#define DDB_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
+#define DDB_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
+#define DDB_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
+#define DDB_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
+#define DDB_INTCS	0x0070	/* Controller Internal Registers and Devices */
+				/* [R/W] */
+#define DDB_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
+/* Vrc5477 has two more, IOPCIW0, IOPCIW1 */
+
+/*
+ *  CPU Interface Registers
+ */
+#define DDB_CPUSTAT	0x0080	/* CPU Status [R/W] */
+#define DDB_INTCTRL	0x0088	/* Interrupt Control [R/W] */
+#define DDB_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
+#define DDB_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
+				/* Enable [R/W] */
+#define DDB_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
+#define DDB_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
+
+
+/*
+ *  Memory-Interface Registers
+ */
+#define DDB_MEMCTRL	0x00C0	/* Memory Control */
+#define DDB_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
+#define DDB_CHKERR	0x00D0	/* Memory Check Error Status [R] */
+
+
+/*
+ *  PCI-Bus Registers
+ */
+#define DDB_PCICTRL	0x00E0	/* PCI Control [R/W] */
+#define DDB_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
+#define DDB_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
+#define DDB_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
+#define DDB_PCIERR	0x00B8	/* PCI Error [R/W] */
+
+
+/*
+ *  Local-Bus Registers
+ */
+#define DDB_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
+#define DDB_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
+#define DDB_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
+#define DDB_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
+#define DDB_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
+#define DDB_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
+#define DDB_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
+#define DDB_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
+#define DDB_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
+				/* Enables [R/W] */
+#define DDB_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
+#define DDB_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
+
+
+/*
+ *  DMA Registers
+ */
+#define DDB_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
+#define DDB_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
+#define DDB_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
+#define DDB_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
+#define DDB_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
+#define DDB_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
+
+
+/*
+ *  Timer Registers
+ */
+#define DDB_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
+#define DDB_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
+#define DDB_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
+#define DDB_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
+#define DDB_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
+#define DDB_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
+#define DDB_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
+#define DDB_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
+
+
+/*
+ *  PCI Configuration Space Registers
+ */
+#define DDB_PCI_BASE	0x0200
+
+#define DDB_VID		0x0200	/* PCI Vendor ID [R] */
+#define DDB_DID		0x0202	/* PCI Device ID [R] */
+#define DDB_PCICMD	0x0204	/* PCI Command [R/W] */
+#define DDB_PCISTS	0x0206	/* PCI Status [R/W] */
+#define DDB_REVID	0x0208	/* PCI Revision ID [R] */
+#define DDB_CLASS	0x0209	/* PCI Class Code [R] */
+#define DDB_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
+#define DDB_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
+#define DDB_HTYPE	0x020E	/* PCI Header Type [R] */
+#define DDB_BIST	0x020F	/* BIST [R] (unimplemented) */
+#define DDB_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
+#define DDB_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
+#define DDB_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
+#define DDB_CIS		0x0228	/* PCI Cardbus CIS Pointer [R] */
+				/* (unimplemented) */
+#define DDB_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
+#define DDB_SSID	0x022E	/* PCI Sub-System ID [R/W] */
+#define DDB_ROM		0x0230	/* Expansion ROM Base Address [R] */
+				/* (unimplemented) */
+#define DDB_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
+#define DDB_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
+#define DDB_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
+#define DDB_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
+#define DDB_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
+#define DDB_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
+#define DDB_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
+#define DDB_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
+#define DDB_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
+#define DDB_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
+#define DDB_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
+#define DDB_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
+
+
+/*
+ *  Nile 4 Register Access
+ */
+
+static inline void ddb_sync(void)
+{
+/* The DDB5074 doesn't seem to like these accesses. They kill the board on
+ * interrupt load
+ */
+#ifndef CONFIG_DDB5074
+    volatile u32 *p = (volatile u32 *)0xbfc00000;
+    (void)(*p);
+#endif
+}
+
+static inline void ddb_out32(u32 offset, u32 val)
+{
+    *(volatile u32 *)(DDB_BASE+offset) = val;
+    ddb_sync();
+}
+
+static inline u32 ddb_in32(u32 offset)
+{
+    u32 val = *(volatile u32 *)(DDB_BASE+offset);
+    ddb_sync();
+    return val;
+}
+
+static inline void ddb_out16(u32 offset, u16 val)
+{
+    *(volatile u16 *)(DDB_BASE+offset) = val;
+    ddb_sync();
+}
+
+static inline u16 ddb_in16(u32 offset)
+{
+    u16 val = *(volatile u16 *)(DDB_BASE+offset);
+    ddb_sync();
+    return val;
+}
+
+static inline void ddb_out8(u32 offset, u8 val)
+{
+    *(volatile u8 *)(DDB_BASE+offset) = val;
+    ddb_sync();
+}
+
+static inline u8 ddb_in8(u32 offset)
+{
+    u8 val = *(volatile u8 *)(DDB_BASE+offset);
+    ddb_sync();
+    return val;
+}
+
+
+/*
+ *  Physical Device Address Registers
+ */
+
+extern u32
+ddb_calc_pdar(u32 phys, u32 size, int width, int on_memory_bus, int pci_visible);
+extern void
+ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+	     int on_memory_bus, int pci_visible);
+
+/*
+ *  PCI Master Registers
+ */
+
+#define DDB_PCICMD_IACK		0	/* PCI Interrupt Acknowledge */
+#define DDB_PCICMD_IO		1	/* PCI I/O Space */
+#define DDB_PCICMD_MEM		3	/* PCI Memory Space */
+#define DDB_PCICMD_CFG		5	/* PCI Configuration Space */
+
+/*
+ * additional options for pci init reg (no shifting needed)
+ */
+#define DDB_PCI_CFGTYPE1     0x200   /* for pci init0/1 regs */
+#define DDB_PCI_ACCESS_32    0x10    /* for pci init0/1 regs */
+
+
+extern void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options);
+
+/*
+ * we need to reset pci bus when we start up and shutdown
+ */
+extern void ddb_pci_reset_bus(void);
+
+
+/*
+ * include the board dependent part
+ */
+#if defined(CONFIG_DDB5074)
+#include <asm/ddb5xxx/ddb5074.h>
+#elif defined(CONFIG_DDB5476)
+#include <asm/ddb5xxx/ddb5476.h>
+#elif defined(CONFIG_DDB5477)
+#include <asm/ddb5xxx/ddb5477.h>
+#else
+#error "Unknown DDB board!"
+#endif
+
+#endif /* __ASM_DDB5XXX_DDB5XXX_H */
diff --git a/include/asm-mips/debug.h b/include/asm-mips/debug.h
new file mode 100644
index 000000000000..930f2b75e766
--- /dev/null
+++ b/include/asm-mips/debug.h
@@ -0,0 +1,49 @@
+/*
+ * Debug macros for run-time debugging.
+ * Turned on/off with CONFIG_RUNTIME_DEBUG option.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _ASM_DEBUG_H
+#define _ASM_DEBUG_H
+
+#include <linux/config.h>
+
+/*
+ * run-time macros for catching spurious errors.  Eable CONFIG_RUNTIME_DEBUG in
+ * kernel hacking config menu to use them.
+ *
+ * Use them as run-time debugging aid.  NEVER USE THEM AS ERROR HANDLING CODE!!!
+ */
+
+#ifdef CONFIG_RUNTIME_DEBUG
+
+#include <linux/kernel.h>
+
+#define db_assert(x)  if (!(x)) { \
+	panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_warn(x)  if (!(x)) { \
+	printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_verify(x, y) db_assert(x y)
+#define db_verify_warn(x, y) db_warn(x y)
+#define db_run(x)  do { x; } while (0)
+
+#else
+
+#define db_assert(x)
+#define db_warn(x)
+#define db_verify(x, y) x
+#define db_verify_warn(x, y) x
+#define db_run(x)
+
+#endif
+
+#endif /* _ASM_DEBUG_H */
diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h
new file mode 100644
index 000000000000..724908b0bf13
--- /dev/null
+++ b/include/asm-mips/dec/ecc.h
@@ -0,0 +1,55 @@
+/*
+ *	include/asm-mips/dec/ecc.h
+ *
+ *	ECC handling logic definitions common to DECstation/DECsystem
+ *	5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and
+ *	DECsystem 5900 (KN03), 5900/260 (KN05) systems.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_ECC_H
+#define __ASM_MIPS_DEC_ECC_H
+
+/*
+ * Error Address Register bits.
+ * The register is r/wc -- any write clears it.
+ */
+#define KN0X_EAR_VALID		(1<<31)		/* error data valid, bus IRQ */
+#define KN0X_EAR_CPU		(1<<30)		/* CPU/DMA transaction */
+#define KN0X_EAR_WRITE		(1<<29)		/* write/read transaction */
+#define KN0X_EAR_ECCERR		(1<<28)		/* ECC/timeout or overrun */
+#define KN0X_EAR_RES_27		(1<<27)		/* unused */
+#define KN0X_EAR_ADDRESS	(0x7ffffff<<0)	/* address involved */
+
+/*
+ * Error Syndrome Register bits.
+ * The register is frozen when EAR.VALID is set, otherwise it records bits
+ * from the last memory read.  The register is r/wc -- any write clears it.
+ */
+#define KN0X_ESR_VLDHI		(1<<31)		/* error data valid hi word */
+#define KN0X_ESR_CHKHI		(0x7f<<24)	/* check bits read from mem */
+#define KN0X_ESR_SNGHI		(1<<23)		/* single/double bit error */
+#define KN0X_ESR_SYNHI		(0x7f<<16)	/* syndrome from ECC logic */
+#define KN0X_ESR_VLDLO		(1<<15)		/* error data valid lo word */
+#define KN0X_ESR_CHKLO		(0x7f<<8)	/* check bits read from mem */
+#define KN0X_ESR_SNGLO		(1<<7)		/* single/double bit error */
+#define KN0X_ESR_SYNLO		(0x7f<<0)	/* syndrome from ECC logic */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_ecc_be_init(void);
+extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+#endif
+
+#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/include/asm-mips/dec/interrupts.h b/include/asm-mips/dec/interrupts.h
new file mode 100644
index 000000000000..273e4d65bfe6
--- /dev/null
+++ b/include/asm-mips/dec/interrupts.h
@@ -0,0 +1,125 @@
+/*
+ * Miscellaneous definitions used to initialise the interrupt vector table
+ * with the machine-specific interrupt routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 by Paul M. Antoine.
+ * reworked 1998 by Harald Koerfgen.
+ * Copyright (C) 2001, 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_INTERRUPTS_H
+#define __ASM_DEC_INTERRUPTS_H
+
+#include <asm/mipsregs.h>
+
+
+/*
+ * The list of possible system devices which provide an
+ * interrupt.  Not all devices exist on a given system.
+ */
+#define DEC_IRQ_CASCADE		0	/* cascade from CSR or I/O ASIC */
+
+/* Ordinary interrupts */
+#define DEC_IRQ_AB_RECV		1	/* ACCESS.bus receive */
+#define DEC_IRQ_AB_XMIT		2	/* ACCESS.bus transmit */
+#define DEC_IRQ_DZ11		3	/* DZ11 (DC7085) serial */
+#define DEC_IRQ_ASC		4	/* ASC (NCR53C94) SCSI */
+#define DEC_IRQ_FLOPPY		5	/* 82077 FDC */
+#define DEC_IRQ_FPU		6	/* R3k FPU */
+#define DEC_IRQ_HALT		7	/* HALT button or from ACCESS.Bus */
+#define DEC_IRQ_ISDN		8	/* Am79C30A ISDN */
+#define DEC_IRQ_LANCE		9	/* LANCE (Am7990) Ethernet */
+#define DEC_IRQ_BUS		10	/* memory, I/O bus read/write errors */
+#define DEC_IRQ_PSU		11	/* power supply unit warning */
+#define DEC_IRQ_RTC		12	/* DS1287 RTC */
+#define DEC_IRQ_SCC0		13	/* SCC (Z85C30) serial #0 */
+#define DEC_IRQ_SCC1		14	/* SCC (Z85C30) serial #1 */
+#define DEC_IRQ_SII		15	/* SII (DC7061) SCSI */
+#define DEC_IRQ_TC0		16	/* TURBOchannel slot #0 */
+#define DEC_IRQ_TC1		17	/* TURBOchannel slot #1 */
+#define DEC_IRQ_TC2		18	/* TURBOchannel slot #2 */
+#define DEC_IRQ_TIMER		19	/* ARC periodic timer */
+#define DEC_IRQ_VIDEO		20	/* framebuffer */
+
+/* I/O ASIC DMA interrupts */
+#define DEC_IRQ_ASC_MERR	21	/* ASC memory read error */
+#define DEC_IRQ_ASC_ERR		22	/* ASC page overrun */
+#define DEC_IRQ_ASC_DMA		23	/* ASC buffer pointer loaded */
+#define DEC_IRQ_FLOPPY_ERR	24	/* FDC error */
+#define DEC_IRQ_ISDN_ERR	25	/* ISDN memory read/overrun error */
+#define DEC_IRQ_ISDN_RXDMA	26	/* ISDN recv buffer pointer loaded */
+#define DEC_IRQ_ISDN_TXDMA	27	/* ISDN xmit buffer pointer loaded */
+#define DEC_IRQ_LANCE_MERR	28	/* LANCE memory read error */
+#define DEC_IRQ_SCC0A_RXERR	29	/* SCC0A (printer) receive overrun */
+#define DEC_IRQ_SCC0A_RXDMA	30	/* SCC0A receive half page */
+#define DEC_IRQ_SCC0A_TXERR	31	/* SCC0A xmit memory read/overrun */
+#define DEC_IRQ_SCC0A_TXDMA	32	/* SCC0A transmit page end */
+#define DEC_IRQ_AB_RXERR	33	/* ACCESS.bus receive overrun */
+#define DEC_IRQ_AB_RXDMA	34	/* ACCESS.bus receive half page */
+#define DEC_IRQ_AB_TXERR	35	/* ACCESS.bus xmit memory read/ovrn */
+#define DEC_IRQ_AB_TXDMA	36	/* ACCESS.bus transmit page end */
+#define DEC_IRQ_SCC1A_RXERR	37	/* SCC1A (modem) receive overrun */
+#define DEC_IRQ_SCC1A_RXDMA	38	/* SCC1A receive half page */
+#define DEC_IRQ_SCC1A_TXERR	39	/* SCC1A xmit memory read/overrun */
+#define DEC_IRQ_SCC1A_TXDMA	40	/* SCC1A transmit page end */
+
+/* TC5 & TC6 are virtual slots for KN02's onboard devices */
+#define DEC_IRQ_TC5		DEC_IRQ_ASC	/* virtual PMAZ-AA */
+#define DEC_IRQ_TC6		DEC_IRQ_LANCE	/* virtual PMAD-AA */
+
+#define DEC_NR_INTS		41
+
+
+/* Largest of cpu mask_nr tables. */
+#define DEC_MAX_CPU_INTS	6
+/* Largest of asic mask_nr tables. */
+#define DEC_MAX_ASIC_INTS	9
+
+
+/*
+ * CPU interrupt bits common to all systems.
+ */
+#define DEC_CPU_INR_FPU		7	/* R3k FPU */
+#define DEC_CPU_INR_SW1		1	/* software #1 */
+#define DEC_CPU_INR_SW0		0	/* software #0 */
+
+#define DEC_CPU_IRQ_BASE	0	/* first IRQ assigned to CPU */
+
+#define DEC_CPU_IRQ_NR(n)	((n) + DEC_CPU_IRQ_BASE)
+#define DEC_CPU_IRQ_MASK(n)	(1 << ((n) + CAUSEB_IP))
+#define DEC_CPU_IRQ_ALL		(0xff << CAUSEB_IP)
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Interrupt table structures to hide differences between systems.
+ */
+typedef union { int i; void *p; } int_ptr;
+extern int dec_interrupt[DEC_NR_INTS];
+extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2];
+extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2];
+extern int cpu_fpu_mask;
+
+
+/*
+ * Common interrupt routine prototypes for all DECStations
+ */
+extern void kn02_io_int(void);
+extern void kn02xa_io_int(void);
+extern void kn03_io_int(void);
+extern void asic_dma_int(void);
+extern void asic_all_int(void);
+extern void kn02_all_int(void);
+extern void cpu_all_int(void);
+
+extern void dec_intr_unimplemented(void);
+extern void asic_intr_unimplemented(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mips/dec/ioasic.h b/include/asm-mips/dec/ioasic.h
new file mode 100644
index 000000000000..486a5b0a1302
--- /dev/null
+++ b/include/asm-mips/dec/ioasic.h
@@ -0,0 +1,36 @@
+/*
+ *	include/asm-mips/dec/ioasic.h
+ *
+ *	DEC I/O ASIC access operations.
+ *
+ *	Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_DEC_IOASIC_H
+#define __ASM_DEC_IOASIC_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+extern spinlock_t ioasic_ssr_lock;
+
+extern volatile u32 *ioasic_base;
+
+static inline void ioasic_write(unsigned int reg, u32 v)
+{
+	ioasic_base[reg / 4] = v;
+}
+
+static inline u32 ioasic_read(unsigned int reg)
+{
+	return ioasic_base[reg / 4];
+}
+
+extern void init_ioasic_irqs(int base);
+
+#endif /* __ASM_DEC_IOASIC_H */
diff --git a/include/asm-mips/dec/ioasic_addrs.h b/include/asm-mips/dec/ioasic_addrs.h
new file mode 100644
index 000000000000..5e18a7510592
--- /dev/null
+++ b/include/asm-mips/dec/ioasic_addrs.h
@@ -0,0 +1,151 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the address map in the JUNKIO Asic
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H
+#define __ASM_MIPS_DEC_IOASIC_ADDRS_H
+
+#define IOASIC_SLOT_SIZE 0x00040000
+
+/*
+ * Address ranges decoded by the I/O ASIC for onboard devices.
+ */
+#define IOASIC_SYS_ROM	(0*IOASIC_SLOT_SIZE)	/* system board ROM */
+#define IOASIC_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define IOASIC_ESAR 	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define IOASIC_LANCE 	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define IOASIC_SCC0 	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
+#define IOASIC_VDAC_HI	(5*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_SCC1 	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
+#define IOASIC_VDAC_LO	(7*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_TOY 	(8*IOASIC_SLOT_SIZE)	/* RTC */
+#define IOASIC_ISDN 	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
+#define IOASIC_ERRADDR	(9*IOASIC_SLOT_SIZE)	/* bus error address (3max+) */
+#define IOASIC_CHKSYN 	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
+#define IOASIC_ACC_BUS	(10*IOASIC_SLOT_SIZE)	/* ACCESS.bus (maxine) */
+#define IOASIC_MCR 	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
+#define IOASIC_FLOPPY 	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
+#define IOASIC_SCSI 	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
+#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
+
+
+/*
+ * Offsets for I/O ASIC registers (relative to (system_base + IOASIC_IOCTL)).
+ */
+					/* all systems */
+#define IO_REG_SCSI_DMA_P	0x00	/* SCSI DMA Pointer */
+#define IO_REG_SCSI_DMA_BP	0x10	/* SCSI DMA Buffer Pointer */
+#define IO_REG_LANCE_DMA_P	0x20	/* LANCE DMA Pointer */
+#define IO_REG_SCC0A_T_DMA_P	0x30	/* SCC0A Transmit DMA Pointer */
+#define IO_REG_SCC0A_R_DMA_P	0x40	/* SCC0A Receive DMA Pointer */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_T_DMA_P	0x50	/* SCC1A Transmit DMA Pointer */
+#define IO_REG_SCC1A_R_DMA_P	0x60	/* SCC1A Receive DMA Pointer */
+
+					/* Maxine */
+#define IO_REG_AB_T_DMA_P	0x50	/* ACCESS.bus Transmit DMA Pointer */
+#define IO_REG_AB_R_DMA_P	0x60	/* ACCESS.bus Receive DMA Pointer */
+#define IO_REG_FLOPPY_DMA_P	0x70	/* Floppy DMA Pointer */
+#define IO_REG_ISDN_T_DMA_P	0x80	/* ISDN Transmit DMA Pointer */
+#define IO_REG_ISDN_T_DMA_BP	0x90	/* ISDN Transmit DMA Buffer Pointer */
+#define IO_REG_ISDN_R_DMA_P	0xa0	/* ISDN Receive DMA Pointer */
+#define IO_REG_ISDN_R_DMA_BP	0xb0	/* ISDN Receive DMA Buffer Pointer */
+
+					/* all systems */
+#define IO_REG_DATA_0		0xc0	/* System Data Buffer 0 */
+#define IO_REG_DATA_1		0xd0	/* System Data Buffer 1 */
+#define IO_REG_DATA_2		0xe0	/* System Data Buffer 2 */
+#define IO_REG_DATA_3		0xf0	/* System Data Buffer 3 */
+
+					/* all systems */
+#define IO_REG_SSR		0x100	/* System Support Register */
+#define IO_REG_SIR		0x110	/* System Interrupt Register */
+#define IO_REG_SIMR		0x120	/* System Interrupt Mask Reg. */
+#define IO_REG_SAR		0x130	/* System Address Register */
+
+					/* Maxine */
+#define IO_REG_ISDN_T_DATA	0x140	/* ISDN Xmit Data Register */
+#define IO_REG_ISDN_R_DATA	0x150	/* ISDN Receive Data Register */
+
+					/* all systems */
+#define IO_REG_LANCE_SLOT	0x160	/* LANCE I/O Slot Register */
+#define IO_REG_SCSI_SLOT	0x170	/* SCSI Slot Register */
+#define IO_REG_SCC0A_SLOT	0x180	/* SCC0A DMA Slot Register */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_SLOT	0x190	/* SCC1A DMA Slot Register */
+
+					/* Maxine */
+#define IO_REG_AB_SLOT		0x190	/* ACCESS.bus DMA Slot Register */
+#define IO_REG_FLOPPY_SLOT	0x1a0	/* Floppy Slot Register */
+
+					/* all systems */
+#define IO_REG_SCSI_SCR		0x1b0	/* SCSI Partial-Word DMA Control */
+#define IO_REG_SCSI_SDR0	0x1c0	/* SCSI DMA Partial Word 0 */
+#define IO_REG_SCSI_SDR1	0x1d0	/* SCSI DMA Partial Word 1 */
+#define IO_REG_FCTR		0x1e0	/* Free-Running Counter */
+#define IO_REG_RES_31		0x1f0	/* unused */
+
+
+/*
+ * The upper 16 bits of the System Support Register are a part of the
+ * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC
+ * machines.  The exception is the Maxine, which makes use of the
+ * FLOPPY and ISDN bits (otherwise unused) and has a different SCC
+ * wiring.
+ */
+						/* all systems */
+#define IO_SSR_SCC0A_TX_DMA_EN	(1<<31)		/* SCC0A transmit DMA enable */
+#define IO_SSR_SCC0A_RX_DMA_EN	(1<<30)		/* SCC0A receive DMA enable */
+#define IO_SSR_RES_27		(1<<27)		/* unused */
+#define IO_SSR_RES_26		(1<<26)		/* unused */
+#define IO_SSR_RES_25		(1<<25)		/* unused */
+#define IO_SSR_RES_24		(1<<24)		/* unused */
+#define IO_SSR_RES_23		(1<<23)		/* unused */
+#define IO_SSR_SCSI_DMA_DIR	(1<<18)		/* SCSI DMA direction */
+#define IO_SSR_SCSI_DMA_EN	(1<<17)		/* SCSI DMA enable */
+#define IO_SSR_LANCE_DMA_EN	(1<<16)		/* LANCE DMA enable */
+
+						/* except Maxine */
+#define IO_SSR_SCC1A_TX_DMA_EN	(1<<29)		/* SCC1A transmit DMA enable */
+#define IO_SSR_SCC1A_RX_DMA_EN	(1<<28)		/* SCC1A receive DMA enable */
+#define IO_SSR_RES_22		(1<<22)		/* unused */
+#define IO_SSR_RES_21		(1<<21)		/* unused */
+#define IO_SSR_RES_20		(1<<20)		/* unused */
+#define IO_SSR_RES_19		(1<<19)		/* unused */
+
+						/* Maxine */
+#define IO_SSR_AB_TX_DMA_EN	(1<<29)		/* ACCESS.bus xmit DMA enable */
+#define IO_SSR_AB_RX_DMA_EN	(1<<28)		/* ACCESS.bus recv DMA enable */
+#define IO_SSR_FLOPPY_DMA_DIR	(1<<22)		/* Floppy DMA direction */
+#define IO_SSR_FLOPPY_DMA_EN	(1<<21)		/* Floppy DMA enable */
+#define IO_SSR_ISDN_TX_DMA_EN	(1<<20)		/* ISDN transmit DMA enable */
+#define IO_SSR_ISDN_RX_DMA_EN	(1<<19)		/* ISDN receive DMA enable */
+
+/*
+ * The lower 16 bits are system-specific.  Bits 15,11:8 are common and
+ * defined here.  The rest is defined in system-specific headers.
+ */
+#define KN0X_IO_SSR_DIAGDN	(1<<15)		/* diagnostic jumper */
+#define KN0X_IO_SSR_SCC_RST	(1<<11)		/* ~SCC0,1 (Z85C30) reset */
+#define KN0X_IO_SSR_RTC_RST	(1<<10)		/* ~RTC (DS1287) reset */
+#define KN0X_IO_SSR_ASC_RST	(1<<9)		/* ~ASC (NCR53C94) reset */
+#define KN0X_IO_SSR_LANCE_RST	(1<<8)		/* ~LANCE (Am7990) reset */
+
+#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */
diff --git a/include/asm-mips/dec/ioasic_ints.h b/include/asm-mips/dec/ioasic_ints.h
new file mode 100644
index 000000000000..9aaa9869615f
--- /dev/null
+++ b/include/asm-mips/dec/ioasic_ints.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the interrupt related bits in the I/O ASIC
+ * interrupt status register (and the interrupt mask register, of course)
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_IOASIC_INTS_H
+#define __ASM_DEC_IOASIC_INTS_H
+
+/*
+ * The upper 16 bits are a part of the I/O ASIC's internal DMA engine
+ * and thus are common to all I/O ASIC machines.  The exception is
+ * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise
+ * unused) and has a different SCC wiring.
+ */
+					/* all systems */
+#define IO_INR_SCC0A_TXDMA	31	/* SCC0A transmit page end */
+#define IO_INR_SCC0A_TXERR	30	/* SCC0A transmit memory read error */
+#define IO_INR_SCC0A_RXDMA	29	/* SCC0A receive half page */
+#define IO_INR_SCC0A_RXERR	28	/* SCC0A receive overrun */
+#define IO_INR_ASC_DMA		19	/* ASC buffer pointer loaded */
+#define IO_INR_ASC_ERR		18	/* ASC page overrun */
+#define IO_INR_ASC_MERR		17	/* ASC memory read error */
+#define IO_INR_LANCE_MERR	16	/* LANCE memory read error */
+
+					/* except Maxine */
+#define IO_INR_SCC1A_TXDMA	27	/* SCC1A transmit page end */
+#define IO_INR_SCC1A_TXERR	26	/* SCC1A transmit memory read error */
+#define IO_INR_SCC1A_RXDMA	25	/* SCC1A receive half page */
+#define IO_INR_SCC1A_RXERR	24	/* SCC1A receive overrun */
+#define IO_INR_RES_23		23	/* unused */
+#define IO_INR_RES_22		22	/* unused */
+#define IO_INR_RES_21		21	/* unused */
+#define IO_INR_RES_20		20	/* unused */
+
+					/* Maxine */
+#define IO_INR_AB_TXDMA		27	/* ACCESS.bus transmit page end */
+#define IO_INR_AB_TXERR		26	/* ACCESS.bus xmit memory read error */
+#define IO_INR_AB_RXDMA		25	/* ACCESS.bus receive half page */
+#define IO_INR_AB_RXERR		24	/* ACCESS.bus receive overrun */
+#define IO_INR_FLOPPY_ERR	23	/* FDC error */
+#define IO_INR_ISDN_TXDMA	22	/* ISDN xmit buffer pointer loaded */
+#define IO_INR_ISDN_RXDMA	21	/* ISDN recv buffer pointer loaded */
+#define IO_INR_ISDN_ERR		20	/* ISDN memory read/overrun error */
+
+#define IO_INR_DMA		16	/* first DMA IRQ */
+
+/*
+ * The lower 16 bits are system-specific and thus defined in
+ * system-specific headers.
+ */
+
+
+#define IO_IRQ_BASE		8	/* first IRQ assigned to I/O ASIC */
+#define IO_IRQ_LINES		32	/* number of I/O ASIC interrupts */
+
+#define IO_IRQ_NR(n)		((n) + IO_IRQ_BASE)
+#define IO_IRQ_MASK(n)		(1 << (n))
+#define IO_IRQ_ALL		0x0000ffff
+#define IO_IRQ_DMA		0xffff0000
+
+#endif /* __ASM_DEC_IOASIC_INTS_H */
diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h
new file mode 100644
index 000000000000..946943502f83
--- /dev/null
+++ b/include/asm-mips/dec/kn01.h
@@ -0,0 +1,83 @@
+/*
+ * Hardware info about DECstation DS2100/3100 systems (otherwise known as
+ * pmin/pmax or KN01).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN01_H
+#define __ASM_MIPS_DEC_KN01_H
+
+#include <asm/addrspace.h>
+
+#define KN01_SLOT_BASE	KSEG1ADDR(0x10000000)
+#define KN01_SLOT_SIZE	0x01000000
+
+/*
+ * Address ranges for devices.
+ */
+#define KN01_PMASK	(0*KN01_SLOT_SIZE)	/* color plane mask */
+#define KN01_PCC	(1*KN01_SLOT_SIZE)	/* PCC (DC503) cursor */
+#define KN01_VDAC	(2*KN01_SLOT_SIZE)	/* color map */
+#define KN01_RES_3	(3*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_4	(4*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_5	(5*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_6	(6*KN01_SLOT_SIZE)	/* unused */
+#define KN01_ERRADDR	(7*KN01_SLOT_SIZE)	/* write error address */
+#define KN01_LANCE	(8*KN01_SLOT_SIZE)	/* LANCE (Am7990) Ethernet */
+#define KN01_LANCE_MEM	(9*KN01_SLOT_SIZE)	/* LANCE buffer memory */
+#define KN01_SII	(10*KN01_SLOT_SIZE)	/* SII (DC7061) SCSI */
+#define KN01_SII_MEM	(11*KN01_SLOT_SIZE)	/* SII buffer memory */
+#define KN01_DZ11	(12*KN01_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN01_RTC	(13*KN01_SLOT_SIZE)	/* DS1287 RTC (bytes #0) */
+#define KN01_ESAR	(13*KN01_SLOT_SIZE)	/* MAC address (bytes #1) */
+#define KN01_CSR	(14*KN01_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN01_SYS_ROM	(15*KN01_SLOT_SIZE)	/* system board ROM */
+
+
+/*
+ * Some port addresses...
+ */
+#define KN01_LANCE_BASE (KN01_SLOT_BASE + KN01_LANCE)	/* 0xB8000000 */
+#define KN01_DZ11_BASE	(KN01_SLOT_BASE + KN01_DZ11)	/* 0xBC000000 */
+#define KN01_RTC_BASE	(KN01_SLOT_BASE + KN01_RTC)	/* 0xBD000000 */
+
+
+/*
+ * Frame buffer memory address.
+ */
+#define KN01_VFB_MEM	KSEG1ADDR(0x0fc00000)
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN01_CPU_INR_BUS	6	/* memory, I/O bus read/write errors */
+#define KN01_CPU_INR_VIDEO	6	/* PCC area detect #2 */
+#define KN01_CPU_INR_RTC	5	/* DS1287 RTC */
+#define KN01_CPU_INR_DZ11	4	/* DZ11 (DC7085) serial */
+#define KN01_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN01_CPU_INR_SII	2	/* SII (DC7061) SCSI */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
+#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
+#define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
+#define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
+#define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRG		(1<<1)	/* red DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRB		(1<<0)	/* red DAC voltage over blue (r/o) */
+#define KN01_CSR_LEDS		(0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
new file mode 100644
index 000000000000..f797f7045920
--- /dev/null
+++ b/include/asm-mips/dec/kn02.h
@@ -0,0 +1,106 @@
+/*
+ * Hardware info about DECstation 5000/200 systems (otherwise known as
+ * 3max or KN02).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN02_H
+#define __ASM_MIPS_DEC_KN02_H
+
+#ifndef __ASSEMBLY__
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#endif
+
+#include <asm/addrspace.h>
+#include <asm/dec/ecc.h>
+
+
+#define KN02_SLOT_BASE	KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_SIZE	0x00080000
+
+/*
+ * Address ranges decoded by the "system slot" logic for onboard devices.
+ */
+#define KN02_SYS_ROM	(0*KN02_SLOT_SIZE)	/* system board ROM */
+#define KN02_RES_1	(1*KN02_SLOT_SIZE)	/* unused */
+#define KN02_CHKSYN	(2*KN02_SLOT_SIZE)	/* ECC syndrome */
+#define KN02_ERRADDR	(3*KN02_SLOT_SIZE)	/* bus error address */
+#define KN02_DZ11	(4*KN02_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN02_RTC	(5*KN02_SLOT_SIZE)	/* DS1287 RTC */
+#define KN02_CSR	(6*KN02_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
+
+
+/*
+ * Some port addresses...
+ */
+#define KN02_DZ11_BASE	(KN02_SLOT_BASE + KN02_DZ11)	/* DZ11 */
+#define KN02_RTC_BASE	(KN02_SLOT_BASE + KN02_RTC)	/* RTC */
+#define KN02_CSR_BASE	(KN02_SLOT_BASE + KN02_CSR)	/* CSR */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN02_CSR_RES_28		(0xf<<28)	/* unused */
+#define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
+#define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
+#define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
+#define KN03_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
+#define KN03_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
+#define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN02_CSR_LEDIAG		(1<<12)		/* ECC diagn. latch strobe */
+#define KN02_CSR_TXDIS		(1<<11)		/* DZ11 transmit disable */
+#define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
+#define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
+#define KN03_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
+#define KN03_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02_CPU_INR_RES_6	6	/* unused */
+#define KN02_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN02_CPU_INR_RES_4	4	/* unused */
+#define KN02_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02_CPU_INR_CASCADE	2	/* CSR cascade */
+
+/*
+ * CSR interrupt bits.
+ */
+#define KN02_CSR_INR_DZ11	7	/* DZ11 (DC7085) serial */
+#define KN02_CSR_INR_LANCE	6	/* LANCE (Am7990) Ethernet */
+#define KN02_CSR_INR_ASC	5	/* ASC (NCR53C94) SCSI */
+#define KN02_CSR_INR_RES_4	4	/* unused */
+#define KN02_CSR_INR_RES_3	3	/* unused */
+#define KN02_CSR_INR_TC2	2	/* TURBOchannel slot #2 */
+#define KN02_CSR_INR_TC1	1	/* TURBOchannel slot #1 */
+#define KN02_CSR_INR_TC0	0	/* TURBOchannel slot #0 */
+
+
+#define KN02_IRQ_BASE		8	/* first IRQ assigned to CSR */
+#define KN02_IRQ_LINES		8	/* number of CSR interrupts */
+
+#define KN02_IRQ_NR(n)		((n) + KN02_IRQ_BASE)
+#define KN02_IRQ_MASK(n)	(1 << (n))
+#define KN02_IRQ_ALL		0xff
+
+
+#ifndef __ASSEMBLY__
+extern u32 cached_kn02_csr;
+extern spinlock_t kn02_lock;
+extern void init_kn02_irqs(int base);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02_H */
diff --git a/include/asm-mips/dec/kn02ba.h b/include/asm-mips/dec/kn02ba.h
new file mode 100644
index 000000000000..c957a4f1b32d
--- /dev/null
+++ b/include/asm-mips/dec/kn02ba.h
@@ -0,0 +1,67 @@
+/*
+ *	include/asm-mips/dec/kn02ba.h
+ *
+ *	DECstation 5000/1xx (3min or KN02-BA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02BA_H
+#define __ASM_MIPS_DEC_KN02BA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02BA_CPU_INR_HALT	6	/* HALT button */
+#define KN02BA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02BA_CPU_INR_TC2	4	/* TURBOchannel slot #2 */
+#define KN02BA_CPU_INR_TC1	3	/* TURBOchannel slot #1 */
+#define KN02BA_CPU_INR_TC0	2	/* TURBOchannel slot #0 */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02BA_IO_INR_RES_15	15	/* unused */
+#define KN02BA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02BA_IO_INR_RES_13	13	/* unused */
+#define KN02BA_IO_INR_BUS	12	/* memory, I/O bus read/write errors */
+#define KN02BA_IO_INR_RES_11	11	/* unused */
+#define KN02BA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02BA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02BA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02BA_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN02BA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02BA_IO_INR_RTC	5	/* DS1287 RTC */
+#define KN02BA_IO_INR_PSU	4	/* power supply unit warning */
+#define KN02BA_IO_INR_RES_3	3	/* unused */
+#define KN02BA_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN02BA_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN02BA_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02BA_MER_RES_27	(1<<27)		/* unused */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02BA_MSR_RES_17	(0x3ff<<17)	/* unused */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN02BA_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN02BA_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN02BA_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN02BA_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN02BA_H */
diff --git a/include/asm-mips/dec/kn02ca.h b/include/asm-mips/dec/kn02ca.h
new file mode 100644
index 000000000000..92c0fe256099
--- /dev/null
+++ b/include/asm-mips/dec/kn02ca.h
@@ -0,0 +1,79 @@
+/*
+ *	include/asm-mips/dec/kn02ca.h
+ *
+ *	Personal DECstation 5000/xx (Maxine or KN02-CA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02CA_H
+#define __ASM_MIPS_DEC_KN02CA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02CA_CPU_INR_HALT	6	/* HALT from ACCESS.Bus */
+#define KN02CA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02CA_CPU_INR_BUS	4	/* memory, I/O bus read/write errors */
+#define KN02CA_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02CA_CPU_INR_TIMER	2	/* ARC periodic timer */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02CA_IO_INR_FLOPPY	15	/* 82077 FDC */
+#define KN02CA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02CA_IO_INR_POWERON	13	/* (*) ACCESS.Bus/power-on reset */
+#define KN02CA_IO_INR_TC0	12	/* TURBOchannel slot #0 */
+#define KN02CA_IO_INR_TIMER	12	/* ARC periodic timer (?) */
+#define KN02CA_IO_INR_ISDN	11	/* Am79C30A ISDN */
+#define KN02CA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02CA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02CA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02CA_IO_INR_HDFLOPPY	7	/* (*) HD (1.44MB) floppy status */
+#define KN02CA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02CA_IO_INR_TC1	5	/* TURBOchannel slot #1 */
+#define KN02CA_IO_INR_XDFLOPPY	4	/* (*) XD (2.88MB) floppy status */
+#define KN02CA_IO_INR_VIDEO	3	/* framebuffer */
+#define KN02CA_IO_INR_XVIDEO	2	/* ~framebuffer */
+#define KN02CA_IO_INR_AB_XMIT	1	/* ACCESS.bus transmit */
+#define KN02CA_IO_INR_AB_RECV	0	/* ACCESS.bus receive */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02CA_MER_INTR		(1<<27)		/* ARC IRQ status & ack */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02CA_MSR_INTREN	(1<<26)		/* ARC periodic IRQ enable */
+#define KN02CA_MSR_MS10EN	(1<<25)		/* 10/1ms IRQ period select */
+#define KN02CA_MSR_PFORCE	(0xf<<21)	/* byte lane error force */
+#define KN02CA_MSR_MABEN	(1<<20)		/* A side VFB address enable */
+#define KN02CA_MSR_LASTBANK	(0x7<<17)	/* onboard RAM bank # */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03CA_IO_SSR_RES_14	(1<<14)		/* unused */
+#define KN03CA_IO_SSR_RES_13	(1<<13)		/* unused */
+#define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
+
+#define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
+#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
+#define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_2	(1<<2)		/* unused */
+#define KN03CA_IO_SSR_RES_1	(1<<1)		/* unused */
+#define KN03CA_IO_SSR_LED	(1<<0)		/* power LED */
+
+#endif /* __ASM_MIPS_DEC_KN02CA_H */
diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h
new file mode 100644
index 000000000000..648c4dcbba1d
--- /dev/null
+++ b/include/asm-mips/dec/kn02xa.h
@@ -0,0 +1,75 @@
+/*
+ * Hardware info common to DECstation 5000/1xx systems (otherwise
+ * known as 3min or kn02ba) and Personal DECstations 5000/xx ones
+ * (otherwise known as maxine or kn02ca).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ *
+ * These are addresses which have to be known early in the boot process.
+ * For other addresses refer to tc.h, ioasic_addrs.h and friends.
+ */
+#ifndef __ASM_MIPS_DEC_KN02XA_H
+#define __ASM_MIPS_DEC_KN02XA_H
+
+#include <asm/addrspace.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN02XA_SLOT_BASE	KSEG1ADDR(0x1c000000)
+
+/*
+ * Some port addresses...
+ */
+#define KN02XA_IOASIC_BASE    (KN02XA_SLOT_BASE + IOASIC_IOCTL)	/* I/O ASIC */
+#define KN02XA_RTC_BASE		(KN02XA_SLOT_BASE + IOASIC_TOY)	/* RTC */
+
+
+/*
+ * Memory control ASIC registers.
+ */
+#define KN02XA_MER	KSEG1ADDR(0x0c400000)	/* memory error register */
+#define KN02XA_MSR	KSEG1ADDR(0x0c800000)	/* memory size register */
+
+/*
+ * CPU control ASIC registers.
+ */
+#define KN02XA_MEM_CONF	KSEG1ADDR(0x0e000000)	/* write timeout config */
+#define KN02XA_EAR	KSEG1ADDR(0x0e000004)	/* error address register */
+#define KN02XA_BOOT0	KSEG1ADDR(0x0e000008)	/* boot 0 register */
+#define KN02XA_MEM_INTR	KSEG1ADDR(0x0e00000c)	/* write err IRQ stat & ack */
+
+/*
+ * Memory Error Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MER_RES_28	(0xf<<28)	/* unused */
+#define KN02XA_MER_RES_17	(0x3ff<<17)	/* unused */
+#define KN02XA_MER_PAGERR	(1<<16)		/* 2k page boundary error */
+#define KN02XA_MER_TRANSERR	(1<<15)		/* transfer length error */
+#define KN02XA_MER_PARDIS	(1<<14)		/* parity error disable */
+#define KN02XA_MER_RES_12	(0x3<<12)	/* unused */
+#define KN02XA_MER_BYTERR	(0xf<<8)	/* byte lane error bitmask */
+#define KN02XA_MER_RES_0	(0xff<<0)	/* unused */
+
+/*
+ * Memory Size Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MSR_RES_27	(0x1f<<27)	/* unused */
+#define KN02XA_MSR_RES_14	(0x7<<14)	/* unused */
+#define KN02XA_MSR_SIZE		(1<<13)		/* 16M/4M stride */
+#define KN02XA_MSR_RES_0	(0x1fff<<0)	/* unused */
+
+/*
+ * Error Address Register bits.
+ */
+#define KN02XA_EAR_RES_29	(0x7<<29)	/* unused */
+#define KN02XA_EAR_ADDRESS	(0x7ffffff<<2)	/* address involved */
+#define KN02XA_EAR_RES_0	(0x3<<0)	/* unused */
+
+#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h
new file mode 100644
index 000000000000..676abd17c6a4
--- /dev/null
+++ b/include/asm-mips/dec/kn03.h
@@ -0,0 +1,83 @@
+/*
+ * Hardware info about DECstation 5000/2x0 systems (otherwise known as
+ * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which
+ * differ mechanically but are otherwise identical (both are known as
+ * KN03).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN03_H
+#define __ASM_MIPS_DEC_KN03_H
+
+#include <asm/addrspace.h>
+#include <asm/dec/ecc.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN03_SLOT_BASE	KSEG1ADDR(0x1f800000)
+
+/*
+ * Some port addresses...
+ */
+#define KN03_IOASIC_BASE	(KN03_SLOT_BASE + IOASIC_IOCTL)	/* I/O ASIC */
+#define KN03_RTC_BASE		(KN03_SLOT_BASE + IOASIC_TOY)	/* RTC */
+#define KN03_MCR_BASE		(KN03_SLOT_BASE + IOASIC_MCR)	/* MCR */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN03_CPU_INR_HALT	6	/* HALT button */
+#define KN03_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN03_CPU_INR_RES_4	4	/* unused */
+#define KN03_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN03_CPU_INR_CASCADE	2	/* I/O ASIC cascade */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN03_IO_INR_3MAXP	15	/* (*) 3max+/bigmax ID */
+#define KN03_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN03_IO_INR_TC2		13	/* TURBOchannel slot #2 */
+#define KN03_IO_INR_TC1		12	/* TURBOchannel slot #1 */
+#define KN03_IO_INR_TC0		11	/* TURBOchannel slot #0 */
+#define KN03_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN03_IO_INR_ASC		9	/* ASC (NCR53C94) SCSI */
+#define KN03_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN03_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN03_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN03_IO_INR_RTC		5	/* DS1287 RTC */
+#define KN03_IO_INR_PSU		4	/* power supply unit warning */
+#define KN03_IO_INR_RES_3	3	/* unused */
+#define KN03_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN03_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN03_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Control Register bits.
+ */
+#define KN03_MCR_RES_16		(0xffff<<16)	/* unused */
+#define KN03_MCR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN03_MCR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN03_MCR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN03_MCR_RES_11		(0x3<<12)	/* unused */
+#define KN03_MCR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN03_MCR_RES_7		(0x7<<7)	/* unused */
+#define KN03_MCR_CHECK		(0x7f<<0)	/* diagnostic check bits */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN03_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN03_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN03_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN03_H */
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
new file mode 100644
index 000000000000..b120362b8f13
--- /dev/null
+++ b/include/asm-mips/dec/kn05.h
@@ -0,0 +1,71 @@
+/*
+ *	include/asm-mips/dec/kn05.h
+ *
+ *	DECstation 5000/260 (4max+ or KN05) and DECsystem 5900/260
+ *	definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	WARNING!  All this information is pure guesswork based on the
+ *	ROM.  It is provided here in hope it will give someone some
+ *	food for thought.  No documentation for the KN05 module has
+ *	been located so far.
+ */
+#ifndef __ASM_MIPS_DEC_KN05_H
+#define __ASM_MIPS_DEC_KN05_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+/*
+ * The oncard MB (Memory Buffer) ASIC provides an additional address
+ * decoder.  Certain address ranges within the "high" 16 slots are
+ * passed to the I/O ASIC's decoder like with the KN03.  Others are
+ * handled locally.  "Low" slots are always passed.
+ */
+#define KN05_MB_ROM	(16*IOASIC_SLOT_SIZE)	/* KN05 card ROM */
+#define KN05_IOCTL	(17*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define KN05_ESAR	(18*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define KN05_LANCE	(19*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define KN05_MB_INT	(20*IOASIC_SLOT_SIZE)	/* MB interrupt register */
+#define KN05_MB_EA	(21*IOASIC_SLOT_SIZE)	/* MB error address? */
+#define KN05_MB_EC	(22*IOASIC_SLOT_SIZE)	/* MB error ??? */
+#define KN05_MB_CSR	(23*IOASIC_SLOT_SIZE)	/* MB control & status */
+#define KN05_RES_24	(24*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_RES_25	(25*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_RES_26	(26*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_RES_27	(27*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_SCSI	(28*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define KN05_RES_29	(29*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_RES_30	(30*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN05_RES_31	(31*IOASIC_SLOT_SIZE)	/* unused? */
+
+/*
+ * Bits for the MB interrupt register.
+ * The register appears read-only.
+ */
+#define KN05_MB_INT_TC		(1<<0)		/* TURBOchannel? */
+#define KN05_MB_INT_RTC		(1<<1)		/* RTC? */
+#define KN05_MB_INT_MT		(1<<3)		/* ??? */
+
+/*
+ * Bits for the MB control & status register.
+ * Set to 0x00bf8001 on my system by the ROM.
+ */
+#define KN05_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
+#define KN05_MB_CSR_F		(1<<1)		/* ??? */
+#define KN05_MB_CSR_ECC		(0xff<<2)	/* ??? */
+#define KN05_MB_CSR_OD		(1<<10)		/* ??? */
+#define KN05_MB_CSR_CP		(1<<11)		/* ??? */
+#define KN05_MB_CSR_UNC		(1<<12)		/* ??? */
+#define KN05_MB_CSR_IM		(1<<13)		/* ??? */
+#define KN05_MB_CSR_NC		(1<<14)		/* ??? */
+#define KN05_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
+#define KN05_MB_CSR_MSK		(0x1f<<16)	/* ??? */
+#define KN05_MB_CSR_FW		(1<<21)		/* ??? */
+
+#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/include/asm-mips/dec/kn230.h b/include/asm-mips/dec/kn230.h
new file mode 100644
index 000000000000..ff1bf17de8d8
--- /dev/null
+++ b/include/asm-mips/dec/kn230.h
@@ -0,0 +1,26 @@
+/*
+ *	include/asm-mips/dec/kn230.h
+ *
+ *	DECsystem 5100 (MIPSmate or KN230) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN230_H
+#define __ASM_MIPS_DEC_KN230_H
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN230_CPU_INR_HALT	6	/* HALT button */
+#define KN230_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN230_CPU_INR_RTC	4	/* DS1287 RTC */
+#define KN230_CPU_INR_SII	3	/* SII (DC7061) SCSI */
+#define KN230_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN230_CPU_INR_DZ11	2	/* DZ11 (DC7085) serial */
+
+#endif /* __ASM_MIPS_DEC_KN230_H */
diff --git a/include/asm-mips/dec/machtype.h b/include/asm-mips/dec/machtype.h
new file mode 100644
index 000000000000..a6ecdebc430a
--- /dev/null
+++ b/include/asm-mips/dec/machtype.h
@@ -0,0 +1,27 @@
+/*
+ * Various machine type macros
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998, 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_DEC_MACHTYPE_H
+#define __ASM_DEC_MACHTYPE_H
+
+#include <asm/bootinfo.h>
+
+#define TURBOCHANNEL	(mips_machtype == MACH_DS5000_200 || \
+			 mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#define IOASIC		(mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#endif
diff --git a/include/asm-mips/dec/prom.h b/include/asm-mips/dec/prom.h
new file mode 100644
index 000000000000..b63e2f2317d1
--- /dev/null
+++ b/include/asm-mips/dec/prom.h
@@ -0,0 +1,173 @@
+/*
+ *	include/asm-mips/dec/prom.h
+ *
+ *	DECstation PROM interface.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on arch/mips/dec/prom/prom.h by the Anonymous.
+ */
+#ifndef _ASM_DEC_PROM_H
+#define _ASM_DEC_PROM_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+/*
+ * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
+ * Many of these will work for MIPSen as well!
+ */
+#define VEC_RESET		(u64 *)KSEG1ADDR(0x1fc00000)
+							/* Prom base address */
+
+#define PMAX_PROM_ENTRY(x)	(VEC_RESET + (x))	/* Prom jump table */
+
+#define PMAX_PROM_HALT		PMAX_PROM_ENTRY(2)	/* valid on MIPSen */
+#define PMAX_PROM_AUTOBOOT	PMAX_PROM_ENTRY(5)	/* valid on MIPSen */
+#define PMAX_PROM_OPEN		PMAX_PROM_ENTRY(6)
+#define PMAX_PROM_READ		PMAX_PROM_ENTRY(7)
+#define PMAX_PROM_CLOSE		PMAX_PROM_ENTRY(10)
+#define PMAX_PROM_LSEEK		PMAX_PROM_ENTRY(11)
+#define PMAX_PROM_GETCHAR	PMAX_PROM_ENTRY(12)
+#define PMAX_PROM_PUTCHAR	PMAX_PROM_ENTRY(13)	/* 12 on MIPSen */
+#define PMAX_PROM_GETS		PMAX_PROM_ENTRY(15)
+#define PMAX_PROM_PRINTF	PMAX_PROM_ENTRY(17)
+#define PMAX_PROM_GETENV	PMAX_PROM_ENTRY(33)	/* valid on MIPSen */
+
+
+/*
+ * Magic number indicating REX PROM available on DECstation.  Found in
+ * register a2 on transfer of control to program from PROM.
+ */
+#define REX_PROM_MAGIC		0x30464354
+
+#ifdef CONFIG_MIPS64
+
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+
+#else /* !CONFIG_MIPS64 */
+
+#define prom_is_rex(magic)	((magic) == REX_PROM_MAGIC)
+
+#endif /* !CONFIG_MIPS64 */
+
+
+/*
+ * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
+ * DS5000/2x0.
+ */
+#define REX_PROM_GETBITMAP	0x84/4	/* get mem bitmap */
+#define REX_PROM_GETCHAR	0x24/4	/* getch() */
+#define REX_PROM_GETENV		0x64/4	/* get env. variable */
+#define REX_PROM_GETSYSID	0x80/4	/* get system id */
+#define REX_PROM_GETTCINFO	0xa4/4
+#define REX_PROM_PRINTF		0x30/4	/* printf() */
+#define REX_PROM_SLOTADDR	0x6c/4	/* slotaddr */
+#define REX_PROM_BOOTINIT	0x54/4	/* open() */
+#define REX_PROM_BOOTREAD	0x58/4	/* read() */
+#define REX_PROM_CLEARCACHE	0x7c/4
+
+
+/*
+ * Used by rex_getbitmap().
+ */
+typedef struct {
+	int pagesize;
+	unsigned char bitmap[0];
+} memmap;
+
+
+/*
+ * Function pointers as read from a PROM's callback vector.
+ */
+extern int (*__rex_bootinit)(void);
+extern int (*__rex_bootread)(void);
+extern int (*__rex_getbitmap)(memmap *);
+extern unsigned long *(*__rex_slot_address)(int);
+extern void *(*__rex_gettcinfo)(void);
+extern int (*__rex_getsysid)(void);
+extern void (*__rex_clear_cache)(void);
+
+extern int (*__prom_getchar)(void);
+extern char *(*__prom_getenv)(char *);
+extern int (*__prom_printf)(char *, ...);
+
+extern int (*__pmax_open)(char*, int);
+extern int (*__pmax_lseek)(int, long, int);
+extern int (*__pmax_read)(int, void *, int);
+extern int (*__pmax_close)(int);
+
+
+#ifdef CONFIG_MIPS64
+
+/*
+ * On MIPS64 we have to call PROM functions via a helper
+ * dispatcher to accomodate ABI incompatibilities.
+ */
+#define __DEC_PROM_O32 __attribute__((alias("call_o32")))
+
+int _rex_bootinit(int (*)(void)) __DEC_PROM_O32;
+int _rex_bootread(int (*)(void)) __DEC_PROM_O32;
+int _rex_getbitmap(int (*)(memmap *), memmap *) __DEC_PROM_O32;
+unsigned long *_rex_slot_address(unsigned long *(*)(int), int) __DEC_PROM_O32;
+void *_rex_gettcinfo(void *(*)(void)) __DEC_PROM_O32;
+int _rex_getsysid(int (*)(void)) __DEC_PROM_O32;
+void _rex_clear_cache(void (*)(void)) __DEC_PROM_O32;
+
+int _prom_getchar(int (*)(void)) __DEC_PROM_O32;
+char *_prom_getenv(char *(*)(char *), char *) __DEC_PROM_O32;
+int _prom_printf(int (*)(char *, ...), char *, ...) __DEC_PROM_O32;
+
+
+#define rex_bootinit()		_rex_bootinit(__rex_bootinit)
+#define rex_bootread()		_rex_bootread(__rex_bootread)
+#define rex_getbitmap(x)	_rex_getbitmap(__rex_getbitmap, x)
+#define rex_slot_address(x)	_rex_slot_address(__rex_slot_address, x)
+#define rex_gettcinfo()		_rex_gettcinfo(__rex_gettcinfo)
+#define rex_getsysid()		_rex_getsysid(__rex_getsysid)
+#define rex_clear_cache()	_rex_clear_cache(__rex_clear_cache)
+
+#define prom_getchar()		_prom_getchar(__prom_getchar)
+#define prom_getenv(x)		_prom_getenv(__prom_getenv, x)
+#define prom_printf(x...)	_prom_printf(__prom_printf, x)
+
+#else /* !CONFIG_MIPS64 */
+
+/*
+ * On plain MIPS we just call PROM functions directly.
+ */
+#define rex_bootinit		__rex_bootinit
+#define rex_bootread		__rex_bootread
+#define rex_getbitmap		__rex_getbitmap
+#define rex_slot_address	__rex_slot_address
+#define rex_gettcinfo		__rex_gettcinfo
+#define rex_getsysid		__rex_getsysid
+#define rex_clear_cache		__rex_clear_cache
+
+#define prom_getchar		__prom_getchar
+#define prom_getenv		__prom_getenv
+#define prom_printf		__prom_printf
+
+#define pmax_open		__pmax_open
+#define pmax_lseek		__pmax_lseek
+#define pmax_read		__pmax_read
+#define pmax_close		__pmax_close
+
+#endif /* !CONFIG_MIPS64 */
+
+
+extern void prom_meminit(u32);
+extern void prom_identify_arch(u32);
+extern void prom_init_cmdline(s32, s32 *, u32);
+
+extern void register_prom_console(void);
+extern void unregister_prom_console(void);
+
+#endif /* _ASM_DEC_PROM_H */
diff --git a/include/asm-mips/dec/serial.h b/include/asm-mips/dec/serial.h
new file mode 100644
index 000000000000..acad75890a05
--- /dev/null
+++ b/include/asm-mips/dec/serial.h
@@ -0,0 +1,36 @@
+/*
+ *	include/asm-mips/dec/serial.h
+ *
+ *	Definitions common to all DECstation serial devices.
+ *
+ *	Copyright (C) 2004  Maciej W. Rozycki
+ *
+ *	Based on bits extracted from drivers/tc/zs.h for which
+ *	the following copyrights apply:
+ *
+ *	Copyright (C) 1995  David S. Miller (davem@caip.rutgers.edu)
+ *	Copyright (C) 1996  Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
+ *	Copyright (C)       Harald Koerfgen
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_SERIAL_H
+#define __ASM_MIPS_DEC_SERIAL_H
+
+struct dec_serial_hook {
+	int (*init_channel)(void *handle);
+	void (*init_info)(void *handle);
+	void (*rx_char)(unsigned char ch, unsigned char fl);
+	int (*poll_rx_char)(void *handle);
+	int (*poll_tx_char)(void *handle, unsigned char ch);
+	unsigned int cflags;
+};
+
+extern int register_dec_serial_hook(unsigned int channel,
+				    struct dec_serial_hook *hook);
+extern int unregister_dec_serial_hook(unsigned int channel);
+
+#endif /* __ASM_MIPS_DEC_SERIAL_H */
diff --git a/include/asm-mips/dec/tc.h b/include/asm-mips/dec/tc.h
new file mode 100644
index 000000000000..d7bba43f863a
--- /dev/null
+++ b/include/asm-mips/dec/tc.h
@@ -0,0 +1,43 @@
+/*
+ * Interface to the TURBOchannel related routines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+#ifndef ASM_TC_H
+#define ASM_TC_H
+
+extern unsigned long system_base;
+
+/*
+ * Search for a TURBOchannel Option Module
+ * with a certain name. Returns slot number
+ * of the first card not in use or -ENODEV
+ * if none found.
+ */
+extern int search_tc_card(const char *);
+/*
+ * Marks the card in slot as used
+ */
+extern void claim_tc_card(int);
+/*
+ * Marks the card in slot as free
+ */
+extern void release_tc_card(int);
+/*
+ * Return base address of card in slot
+ */
+extern unsigned long get_tc_base_addr(int);
+/*
+ * Return interrupt number of slot
+ */
+extern unsigned long get_tc_irq_nr(int);
+/*
+ * Return TURBOchannel clock frequency in hz
+ */
+extern unsigned long get_tc_speed(void);
+
+#endif
diff --git a/include/asm-mips/dec/tcinfo.h b/include/asm-mips/dec/tcinfo.h
new file mode 100644
index 000000000000..cc23509ee77a
--- /dev/null
+++ b/include/asm-mips/dec/tcinfo.h
@@ -0,0 +1,47 @@
+/*
+ * Various TURBOchannel related stuff
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Information obtained through the get_tcinfo prom call
+ * created from:
+ *
+ * TURBOchannel Firmware Specification
+ *
+ * EK-TCAAD-FS-004
+ * from Digital Equipment Corporation
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+
+typedef struct {
+	int revision;
+	int clk_period;
+	int slot_size;
+	int io_timeout;
+	int dma_range;
+	int max_dma_burst;
+	int parity;
+	int reserved[4];
+} tcinfo;
+
+#define MAX_SLOT 7
+
+typedef struct {
+	unsigned long base_addr;
+	unsigned char name[9];
+	unsigned char vendor[9];
+	unsigned char firmware[9];
+	int interrupt;
+	int flags;
+} slot_info;
+
+/*
+ * Values for flags
+ */
+#define FREE 	1<<0
+#define IN_USE	1<<1
+
+
diff --git a/include/asm-mips/dec/tcmodule.h b/include/asm-mips/dec/tcmodule.h
new file mode 100644
index 000000000000..6268e8915d87
--- /dev/null
+++ b/include/asm-mips/dec/tcmodule.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Offsets for the ROM header locations for
+ * TURBOchannel cards
+ *
+ * created from:
+ *
+ * TURBOchannel Firmware Specification
+ *
+ * EK-TCAAD-FS-004
+ * from Digital Equipment Corporation
+ *
+ * Jan.1998 Harald Koerfgen
+ */
+#ifndef __ASM_DEC_TCMODULE_H
+#define __ASM_DEC_TCMODULE_H
+
+#define OLDCARD 0x3c0000
+#define NEWCARD 0x000000
+
+#define TC_ROM_WIDTH	0x3e0
+#define TC_ROM_STRIDE	0x3e4
+#define TC_ROM_SIZE	0x3e8
+#define TC_SLOT_SIZE	0x3ec
+#define TC_PATTERN0	0x3f0
+#define TC_PATTERN1	0x3f4
+#define TC_PATTERN2	0x3f8
+#define TC_PATTERN3	0x3fc
+#define TC_FIRM_VER	0x400
+#define TC_VENDOR	0x420
+#define TC_MODULE	0x440
+#define TC_FIRM_TYPE	0x460
+#define TC_FLAGS	0x470
+#define TC_ROM_OBJECTS	0x480
+
+#endif /* __ASM_DEC_TCMODULE_H */
diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
new file mode 100644
index 000000000000..d0f68447e5a7
--- /dev/null
+++ b/include/asm-mips/delay.h
@@ -0,0 +1,93 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <linux/config.h>
+#include <linux/param.h>
+
+#include <asm/compiler.h>
+
+extern unsigned long loops_per_jiffy;
+
+static inline void __delay(unsigned long loops)
+{
+	if (sizeof(long) == 4)
+		__asm__ __volatile__ (
+		".set\tnoreorder\n"
+		"1:\tbnez\t%0,1b\n\t"
+		"subu\t%0,1\n\t"
+		".set\treorder"
+		: "=r" (loops)
+		: "0" (loops));
+	else if (sizeof(long) == 8)
+		__asm__ __volatile__ (
+		".set\tnoreorder\n"
+		"1:\tbnez\t%0,1b\n\t"
+		"dsubu\t%0,1\n\t"
+		".set\treorder"
+		:"=r" (loops)
+		:"0" (loops));
+}
+
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+static inline void __udelay(unsigned long usecs, unsigned long lpj)
+{
+	unsigned long lo;
+
+	/*
+	 * The common rates of 1000 and 128 are rounded wrongly by the
+	 * catchall case for 64-bit.  Excessive precission?  Probably ...
+	 */
+#if defined(CONFIG_MIPS64) && (HZ == 128)
+	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
+#elif defined(CONFIG_MIPS64) && (HZ == 1000)
+	usecs *= 0x004189374BC6A7f0UL;		/* 2**64 / (1000000 / HZ) */
+#elif defined(CONFIG_MIPS64)
+	usecs *= (0x8000000000000000UL / (500000 / HZ));
+#else /* 32-bit junk follows here */
+	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
+	                           0x80000000ULL) >> 32);
+#endif
+
+	if (sizeof(long) == 4)
+		__asm__("multu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+	else if (sizeof(long) == 8)
+		__asm__("dmultu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+
+	__delay(usecs);
+}
+
+#ifdef CONFIG_SMP
+#define __udelay_val cpu_data[smp_processor_id()].udelay_val
+#else
+#define __udelay_val loops_per_jiffy
+#endif
+
+#define udelay(usecs) __udelay((usecs),__udelay_val)
+
+#endif /* _ASM_DELAY_H */
diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h
new file mode 100644
index 000000000000..5f7dcf5452e7
--- /dev/null
+++ b/include/asm-mips/div64.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2000, 2004  Maciej W. Rozycki
+ * Copyright (C) 2003 Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_DIV64_H
+#define _ASM_DIV64_H
+
+#if (_MIPS_SZLONG == 32)
+
+#include <asm/compiler.h>
+
+/*
+ * No traps on overflows for any of these...
+ */
+
+#define do_div64_32(res, high, low, base) ({ \
+	unsigned long __quot, __mod; \
+	unsigned long __cf, __tmp, __tmp2, __i; \
+	\
+	__asm__(".set	push\n\t" \
+		".set	noat\n\t" \
+		".set	noreorder\n\t" \
+		"move	%2, $0\n\t" \
+		"move	%3, $0\n\t" \
+		"b	1f\n\t" \
+		" li	%4, 0x21\n" \
+		"0:\n\t" \
+		"sll	$1, %0, 0x1\n\t" \
+		"srl	%3, %0, 0x1f\n\t" \
+		"or	%0, $1, %5\n\t" \
+		"sll	%1, %1, 0x1\n\t" \
+		"sll	%2, %2, 0x1\n" \
+		"1:\n\t" \
+		"bnez	%3, 2f\n\t" \
+		" sltu	%5, %0, %z6\n\t" \
+		"bnez	%5, 3f\n" \
+		"2:\n\t" \
+		" addiu	%4, %4, -1\n\t" \
+		"subu	%0, %0, %z6\n\t" \
+		"addiu	%2, %2, 1\n" \
+		"3:\n\t" \
+		"bnez	%4, 0b\n\t" \
+		" srl	%5, %1, 0x1f\n\t" \
+		".set	pop" \
+		: "=&r" (__mod), "=&r" (__tmp), "=&r" (__quot), "=&r" (__cf), \
+		  "=&r" (__i), "=&r" (__tmp2) \
+		: "Jr" (base), "0" (high), "1" (low)); \
+	\
+	(res) = __quot; \
+	__mod; })
+
+#define do_div(n, base) ({ \
+	unsigned long long __quot; \
+	unsigned long __mod; \
+	unsigned long long __div; \
+	unsigned long __upper, __low, __high, __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__high = __div >> 32; \
+	__low = __div; \
+	__upper = __high; \
+	\
+	if (__high) \
+		__asm__("divu	$0, %z2, %z3" \
+			: "=h" (__upper), "=l" (__high) \
+			: "Jr" (__high), "Jr" (__base) \
+			: GCC_REG_ACCUM); \
+	\
+	__mod = do_div64_32(__low, __upper, __low, __base); \
+	\
+	__quot = __high; \
+	__quot = __quot << 32 | __low; \
+	(n) = __quot; \
+	__mod; })
+#endif /* (_MIPS_SZLONG == 32) */
+
+#if (_MIPS_SZLONG == 64)
+
+/*
+ * Don't use this one in new code
+ */
+#define do_div64_32(res, high, low, base) ({ \
+	unsigned int __quot, __mod; \
+	unsigned long __div; \
+	unsigned int __low, __high, __base; \
+	\
+	__high = (high); \
+	__low = (low); \
+	__div = __high; \
+	__div = __div << 32 | __low; \
+	__base = (base); \
+	\
+	__mod = __div % __base; \
+	__div = __div / __base; \
+	\
+	__quot = __div; \
+	(res) = __quot; \
+	__mod; })
+
+/*
+ * Hey, we're already 64-bit, no
+ * need to play games..
+ */
+#define do_div(n, base) ({ \
+	unsigned long __quot; \
+	unsigned int __mod; \
+	unsigned long __div; \
+	unsigned int __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__mod = __div % __base; \
+	__quot = __div / __base; \
+	\
+	(n) = __quot; \
+	__mod; })
+
+#endif /* (_MIPS_SZLONG == 64) */
+
+#endif /* _ASM_DIV64_H */
diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h
new file mode 100644
index 000000000000..af28dc88930b
--- /dev/null
+++ b/include/asm-mips/dma-mapping.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+#include <asm/cache.h>
+
+void *dma_alloc_noncoherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, int flag);
+
+void dma_free_noncoherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, int flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+	enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+	unsigned long offset, size_t size, enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	int nhwentries, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+	size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern int dma_mapping_error(dma_addr_t dma_addr);
+extern int dma_supported(struct device *dev, u64 mask);
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* XXX Largest on any MIPS */
+	return 128;
+}
+
+extern int dma_is_consistent(dma_addr_t dma_addr);
+
+extern void dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction);
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+	dma_addr_t device_addr, size_t size, int flags);
+extern void dma_release_declared_memory(struct device *dev);
+extern void * dma_mark_declared_memory_occupied(struct device *dev,
+	dma_addr_t device_addr, size_t size);
+
+#endif /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h
new file mode 100644
index 000000000000..6aaf9939a716
--- /dev/null
+++ b/include/asm-mips/dma.h
@@ -0,0 +1,313 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ *
+ * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
+ * and can only be used for expansion cards. Onboard DMA controllers, such
+ * as the R4030 on Jazz boards behave totally different!
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <asm/io.h>			/* need byte IO */
+#include <linux/spinlock.h>		/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/*
+ * The maximum address in KSEG0 that we can perform a DMA transfer to on this
+ * platform.  This describes only the PC style part of the DMA logic like on
+ * Deskstations or Acer PICA but not the much more versatile DMA logic used
+ * for the local devices on Acer PICA or Magnums.
+ */
+#ifdef CONFIG_SGI_IP22
+/* Horrible hack to have a correct DMA window on IP22 */
+#include <asm/sgi/mc.h>
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SGIMC_SEG0_BADDR + 0x01000000)
+#else
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + 0x01000000)
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-mips/ds1286.h b/include/asm-mips/ds1286.h
new file mode 100644
index 000000000000..6983b6ff0af3
--- /dev/null
+++ b/include/asm-mips/ds1286.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_DS1286_H
+#define _ASM_DS1286_H
+
+#include <ds1286.h>
+
+#endif /* _ASM_DS1286_H */
diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h
new file mode 100644
index 000000000000..7b92c8045cc2
--- /dev/null
+++ b/include/asm-mips/elf.h
@@ -0,0 +1,282 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/config.h>
+
+/* ELF header e_flags defines. */
+/* MIPS architecture level. */
+#define EF_MIPS_ARCH_1		0x00000000	/* -mips1 code.  */
+#define EF_MIPS_ARCH_2		0x10000000	/* -mips2 code.  */
+#define EF_MIPS_ARCH_3		0x20000000	/* -mips3 code.  */
+#define EF_MIPS_ARCH_4		0x30000000	/* -mips4 code.  */
+#define EF_MIPS_ARCH_5		0x40000000	/* -mips5 code.  */
+#define EF_MIPS_ARCH_32		0x50000000	/* MIPS32 code.  */
+#define EF_MIPS_ARCH_64		0x60000000	/* MIPS64 code.  */
+
+/* The ABI of a file. */
+#define EF_MIPS_ABI_O32		0x00001000	/* O32 ABI.  */
+#define EF_MIPS_ABI_O64		0x00002000	/* O32 extended for 64 bit.  */
+
+#define PT_MIPS_REGINFO		0x70000000
+#define PT_MIPS_RTPROC		0x70000001
+#define PT_MIPS_OPTIONS		0x70000002
+
+/* Flags in the e_flags field of the header */
+#define EF_MIPS_NOREORDER	0x00000001
+#define EF_MIPS_PIC		0x00000002
+#define EF_MIPS_CPIC		0x00000004
+#define EF_MIPS_ABI2		0x00000020
+#define EF_MIPS_OPTIONS_FIRST	0x00000080
+#define EF_MIPS_32BITMODE	0x00000100
+#define EF_MIPS_ABI		0x0000f000
+#define EF_MIPS_ARCH		0xf0000000
+
+#define DT_MIPS_RLD_VERSION	0x70000001
+#define DT_MIPS_TIME_STAMP	0x70000002
+#define DT_MIPS_ICHECKSUM	0x70000003
+#define DT_MIPS_IVERSION	0x70000004
+#define DT_MIPS_FLAGS		0x70000005
+	#define RHF_NONE	0x00000000
+	#define RHF_HARDWAY	0x00000001
+	#define RHF_NOTPOT	0x00000002
+	#define RHF_SGI_ONLY	0x00000010
+#define DT_MIPS_BASE_ADDRESS	0x70000006
+#define DT_MIPS_CONFLICT	0x70000008
+#define DT_MIPS_LIBLIST		0x70000009
+#define DT_MIPS_LOCAL_GOTNO	0x7000000a
+#define DT_MIPS_CONFLICTNO	0x7000000b
+#define DT_MIPS_LIBLISTNO	0x70000010
+#define DT_MIPS_SYMTABNO	0x70000011
+#define DT_MIPS_UNREFEXTNO	0x70000012
+#define DT_MIPS_GOTSYM		0x70000013
+#define DT_MIPS_HIPAGENO	0x70000014
+#define DT_MIPS_RLD_MAP		0x70000016
+
+#define R_MIPS_NONE		0
+#define R_MIPS_16		1
+#define R_MIPS_32		2
+#define R_MIPS_REL32		3
+#define R_MIPS_26		4
+#define R_MIPS_HI16		5
+#define R_MIPS_LO16		6
+#define R_MIPS_GPREL16		7
+#define R_MIPS_LITERAL		8
+#define R_MIPS_GOT16		9
+#define R_MIPS_PC16		10
+#define R_MIPS_CALL16		11
+#define R_MIPS_GPREL32		12
+/* The remaining relocs are defined on Irix, although they are not
+   in the MIPS ELF ABI.  */
+#define R_MIPS_UNUSED1		13
+#define R_MIPS_UNUSED2		14
+#define R_MIPS_UNUSED3		15
+#define R_MIPS_SHIFT5		16
+#define R_MIPS_SHIFT6		17
+#define R_MIPS_64		18
+#define R_MIPS_GOT_DISP		19
+#define R_MIPS_GOT_PAGE		20
+#define R_MIPS_GOT_OFST		21
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_GOTHI16		22
+#define R_MIPS_GOTLO16		23
+#define R_MIPS_SUB		24
+#define R_MIPS_INSERT_A		25
+#define R_MIPS_INSERT_B		26
+#define R_MIPS_DELETE		27
+#define R_MIPS_HIGHER		28
+#define R_MIPS_HIGHEST		29
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_CALLHI16		30
+#define R_MIPS_CALLLO16		31
+/*
+ * This range is reserved for vendor specific relocations.
+ */
+#define R_MIPS_LOVENDOR		100
+#define R_MIPS_HIVENDOR		127
+
+#define SHN_MIPS_ACCOMON	0xff00
+
+#define SHT_MIPS_LIST		0x70000000
+#define SHT_MIPS_CONFLICT	0x70000002
+#define SHT_MIPS_GPTAB		0x70000003
+#define SHT_MIPS_UCODE		0x70000004
+
+#define SHF_MIPS_GPREL	0x10000000
+
+#ifndef ELF_ARCH
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef CONFIG_MIPS32
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if ((__h->e_flags & EF_MIPS_ABI2) != 0)				\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
+	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS64) 			\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+
+#endif /* CONFIG_MIPS64 */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifdef __MIPSEB__
+#define ELF_DATA	ELFDATA2MSB
+#elif __MIPSEL__
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_MIPS
+
+#endif /* !defined(ELF_ARCH) */
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MIPS32
+
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {							\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	set_personality(PER_LINUX);			\
+} while (0)
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+
+#define SET_PERSONALITY(ex, ibcs2)				\
+do {	current->thread.mflags &= ~MF_ABI_MASK;			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32) {		\
+		if ((((ex).e_flags & EF_MIPS_ABI2) != 0) &&	\
+		     ((ex).e_flags & EF_MIPS_ABI) == 0)		\
+			current->thread.mflags |= MF_N32;	\
+		else						\
+			current->thread.mflags |= MF_O32;	\
+	} else							\
+		current->thread.mflags |= MF_N64;		\
+	if (ibcs2)						\
+		set_personality(PER_SVR4);			\
+	else if (current->personality != PER_LINUX32)		\
+		set_personality(PER_LINUX);			\
+} while (0)
+
+#endif /* CONFIG_MIPS64 */
+
+extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs)			\
+	dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
+	dump_task_fpu(tsk, elf_fpregs)
+
+#endif /* __KERNEL__ */
+
+/* This one accepts IRIX binaries.  */
+#define irix_elf_check_arch(hdr)	((hdr)->e_flags & RHF_SGI_ONLY)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+/*
+ * See comments in asm-alpha/elf.h, this is the same thing
+ * on the MIPS.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
+	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
+	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
+	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
+	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
+	_r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0;	\
+	_r->regs[30] = _r->regs[31] = 0;				\
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
new file mode 100644
index 000000000000..2b458f9538cd
--- /dev/null
+++ b/include/asm-mips/errno.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+
+#include <asm-generic/errno-base.h>
+
+#define	ENOMSG		35	/* No message of desired type */
+#define	EIDRM		36	/* Identifier removed */
+#define	ECHRNG		37	/* Channel number out of range */
+#define	EL2NSYNC	38	/* Level 2 not synchronized */
+#define	EL3HLT		39	/* Level 3 halted */
+#define	EL3RST		40	/* Level 3 reset */
+#define	ELNRNG		41	/* Link number out of range */
+#define	EUNATCH		42	/* Protocol driver not attached */
+#define	ENOCSI		43	/* No CSI structure available */
+#define	EL2HLT		44	/* Level 2 halted */
+#define	EDEADLK		45	/* Resource deadlock would occur */
+#define	ENOLCK		46	/* No record locks available */
+#define	EBADE		50	/* Invalid exchange */
+#define	EBADR		51	/* Invalid request descriptor */
+#define	EXFULL		52	/* Exchange full */
+#define	ENOANO		53	/* No anode */
+#define	EBADRQC		54	/* Invalid request code */
+#define	EBADSLT		55	/* Invalid slot */
+#define	EDEADLOCK	56	/* File locking deadlock error */
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EMULTIHOP	74	/* Multihop attempted */
+#define	EBADMSG		77	/* Not a data message */
+#define	ENAMETOOLONG	78	/* File name too long */
+#define	EOVERFLOW	79	/* Value too large for defined data type */
+#define	ENOTUNIQ	80	/* Name not unique on network */
+#define	EBADFD		81	/* File descriptor in bad state */
+#define	EREMCHG		82	/* Remote address changed */
+#define	ELIBACC		83	/* Can not access a needed shared library */
+#define	ELIBBAD		84	/* Accessing a corrupted shared library */
+#define	ELIBSCN		85	/* .lib section in a.out corrupted */
+#define	ELIBMAX		86	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	87	/* Cannot exec a shared library directly */
+#define	EILSEQ		88	/* Illegal byte sequence */
+#define	ENOSYS		89	/* Function not implemented */
+#define	ELOOP		90	/* Too many symbolic links encountered */
+#define	ERESTART	91	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	92	/* Streams pipe error */
+#define	ENOTEMPTY	93	/* Directory not empty */
+#define	EUSERS		94	/* Too many users */
+#define	ENOTSOCK	95	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	96	/* Destination address required */
+#define	EMSGSIZE	97	/* Message too long */
+#define	EPROTOTYPE	98	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	99	/* Protocol not available */
+#define	EPROTONOSUPPORT	120	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	121	/* Socket type not supported */
+#define	EOPNOTSUPP	122	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	123	/* Protocol family not supported */
+#define	EAFNOSUPPORT	124	/* Address family not supported by protocol */
+#define	EADDRINUSE	125	/* Address already in use */
+#define	EADDRNOTAVAIL	126	/* Cannot assign requested address */
+#define	ENETDOWN	127	/* Network is down */
+#define	ENETUNREACH	128	/* Network is unreachable */
+#define	ENETRESET	129	/* Network dropped connection because of reset */
+#define	ECONNABORTED	130	/* Software caused connection abort */
+#define	ECONNRESET	131	/* Connection reset by peer */
+#define	ENOBUFS		132	/* No buffer space available */
+#define	EISCONN		133	/* Transport endpoint is already connected */
+#define	ENOTCONN	134	/* Transport endpoint is not connected */
+#define	EUCLEAN		135	/* Structure needs cleaning */
+#define	ENOTNAM		137	/* Not a XENIX named type file */
+#define	ENAVAIL		138	/* No XENIX semaphores available */
+#define	EISNAM		139	/* Is a named type file */
+#define	EREMOTEIO	140	/* Remote I/O error */
+#define EINIT		141	/* Reserved */
+#define EREMDEV		142	/* Error 142 */
+#define	ESHUTDOWN	143	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	144	/* Too many references: cannot splice */
+#define	ETIMEDOUT	145	/* Connection timed out */
+#define	ECONNREFUSED	146	/* Connection refused */
+#define	EHOSTDOWN	147	/* Host is down */
+#define	EHOSTUNREACH	148	/* No route to host */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EALREADY	149	/* Operation already in progress */
+#define	EINPROGRESS	150	/* Operation now in progress */
+#define	ESTALE		151	/* Stale NFS file handle */
+#define ECANCELED	158	/* AIO operation canceled */
+
+/*
+ * These error are Linux extensions.
+ */
+#define ENOMEDIUM	159	/* No medium found */
+#define EMEDIUMTYPE	160	/* Wrong medium type */
+#define	ENOKEY		161	/* Required key not available */
+#define	EKEYEXPIRED	162	/* Key has expired */
+#define	EKEYREVOKED	163	/* Key has been revoked */
+#define	EKEYREJECTED	164	/* Key was rejected by service */
+
+#define EDQUOT		1133	/* Quota exceeded */
+
+#ifdef __KERNEL__
+
+/* The biggest error number defined here or in <linux/errno.h>. */
+#define EMAXERRNO	1133
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ERRNO_H */
diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h
new file mode 100644
index 000000000000..2436392e7990
--- /dev/null
+++ b/include/asm-mips/fcntl.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003 Ralf Baechle
+ */
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	0x0003
+#define O_RDONLY	0x0000
+#define O_WRONLY	0x0001
+#define O_RDWR		0x0002
+#define O_APPEND	0x0008
+#define O_SYNC		0x0010
+#define O_NONBLOCK	0x0080
+#define O_CREAT         0x0100	/* not fcntl */
+#define O_TRUNC		0x0200	/* not fcntl */
+#define O_EXCL		0x0400	/* not fcntl */
+#define O_NOCTTY	0x0800	/* not fcntl */
+#define FASYNC		0x1000	/* fcntl, for BSD compatibility */
+#define O_LARGEFILE	0x2000	/* allow large file opens */
+#define O_DIRECT	0x8000	/* direct disk access hint */
+#define O_DIRECTORY	0x10000	/* must be a directory */
+#define O_NOFOLLOW	0x20000	/* don't follow links */
+#define O_NOATIME	0x40000
+
+#define O_NDELAY	O_NONBLOCK
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		14
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	24	/*  for sockets. */
+#define F_GETOWN	23	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#ifndef __mips64
+#define F_GETLK64	33	/*  using 'struct flock64' */
+#define F_SETLK64	34
+#define F_SETLKW64	35
+#endif
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+/*
+ * The flavours of struct flock.  "struct flock" is the ABI compliant
+ * variant.  Finally struct flock64 is the LFS variant of struct flock.  As
+ * a historic accident and inconsistence with the ABI definition it doesn't
+ * contain all the same fields as struct flock.
+ */
+
+#ifndef __mips64
+
+typedef struct flock {
+	short	l_type;
+	short	l_whence;
+	__kernel_off_t l_start;
+	__kernel_off_t l_len;
+	long	l_sysid;
+	__kernel_pid_t l_pid;
+	long	pad[4];
+} flock_t;
+
+typedef struct flock64 {
+	short	l_type;
+	short	l_whence;
+	loff_t	l_start;
+	loff_t	l_len;
+	pid_t	l_pid;
+} flock64_t;
+
+#else /* 64-bit definitions */
+
+typedef struct flock {
+	short	l_type;
+	short	l_whence;
+	__kernel_off_t l_start;
+	__kernel_off_t l_len;
+	__kernel_pid_t l_pid;
+} flock_t;
+
+#ifdef __KERNEL__
+#define flock64		flock
+#endif
+
+#endif
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* _ASM_FCNTL_H */
diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h
new file mode 100644
index 000000000000..26b6a90a690b
--- /dev/null
+++ b/include/asm-mips/fixmap.h
@@ -0,0 +1,110 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#define FIXADDR_TOP	(0xffffe000UL)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-mips/floppy.h b/include/asm-mips/floppy.h
new file mode 100644
index 000000000000..aa1ef8b352cc
--- /dev/null
+++ b/include/asm-mips/floppy.h
@@ -0,0 +1,56 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 2000 Ralf Baechle
+ */
+#ifndef _ASM_FLOPPY_H
+#define _ASM_FLOPPY_H
+
+static inline void fd_cacheflush(char * addr, long size)
+{
+	dma_cache_wback_inv((unsigned long)addr,size);
+}
+
+#define MAX_BUFFER_SECTORS 24
+
+
+/*
+ * And on Mips's the CMOS info fails also ...
+ *
+ * FIXME: This information should come from the ARC configuration tree
+ *        or whereever a particular machine has stored this ...
+ */
+#define FLOPPY0_TYPE 		fd_drive_type(0)
+#define FLOPPY1_TYPE		fd_drive_type(1)
+
+#define FDC1			fd_getfdaddr1();
+
+#define N_FDC 1			/* do you *really* want a second controller? */
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ *
+ * On MIPSes using vdma, this actually means that *all* transfers go thru
+ * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
+ * Actually this needs to be a bit more complicated since the so much different
+ * hardware available with MIPS CPUs ...
+ */
+#define CROSS_64KB(a,s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#include <floppy.h>
+
+#endif /* _ASM_FLOPPY_H */
diff --git a/include/asm-mips/fpregdef.h b/include/asm-mips/fpregdef.h
new file mode 100644
index 000000000000..1d9aa0979181
--- /dev/null
+++ b/include/asm-mips/fpregdef.h
@@ -0,0 +1,99 @@
+/*
+ * Definitions for the FPU register names
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_FPREGDEF_H
+#define _ASM_FPREGDEF_H
+
+#include <asm/sgidefs.h>
+                                                                                
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * These definitions only cover the R3000-ish 16/32 register model.
+ * But we're trying to be R3000 friendly anyway ...
+ */
+#define fv0	$f0      /* return value */
+#define fv0f	$f1
+#define fv1	$f2
+#define fv1f	$f3
+#define fa0	$f12     /* argument registers */
+#define fa0f	$f13
+#define fa1	$f14
+#define fa1f	$f15
+#define ft0	$f4      /* caller saved */
+#define ft0f	$f5
+#define ft1	$f6
+#define ft1f	$f7
+#define ft2	$f8
+#define ft2f	$f9
+#define ft3	$f10
+#define ft3f	$f11
+#define ft4	$f16
+#define ft4f	$f17
+#define ft5	$f18
+#define ft5f	$f19
+#define fs0	$f20     /* callee saved */
+#define fs0f	$f21
+#define fs1	$f22
+#define fs1f	$f23
+#define fs2	$f24
+#define fs2f	$f25
+#define fs3	$f26
+#define fs3f	$f27
+#define fs4	$f28
+#define fs4f	$f29
+#define fs5	$f30
+#define fs5f	$f31
+
+#define fcr31	$31      /* FPU status register */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+                                                                                
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define fv0	$f0	/* return value */
+#define fv1	$f2
+#define fa0	$f12	/* argument registers */
+#define fa1	$f13
+#define fa2	$f14
+#define fa3	$f15
+#define fa4	$f16
+#define fa5	$f17
+#define fa6	$f18
+#define fa7	$f19
+#define ft0	$f4	/* caller saved */
+#define ft1	$f5
+#define ft2	$f6
+#define ft3	$f7
+#define ft4	$f8
+#define ft5	$f9
+#define ft6	$f10
+#define ft7	$f11
+#define ft8	$f20
+#define ft9	$f21
+#define ft10	$f22
+#define ft11	$f23
+#define ft12	$f1
+#define ft13	$f3
+#define fs0	$f24	/* callee saved */
+#define fs1	$f25
+#define fs2	$f26
+#define fs3	$f27
+#define fs4	$f28
+#define fs5	$f29
+#define fs6	$f30
+#define fs7	$f31
+
+#define fcr31	$31
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_FPREGDEF_H */
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
new file mode 100644
index 000000000000..6cb38d5c0407
--- /dev/null
+++ b/include/asm-mips/fpu.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/bitops.h>
+#include <asm/processor.h>
+#include <asm/current.h>
+
+struct sigcontext;
+struct sigcontext32;
+
+extern asmlinkage int (*save_fp_context)(struct sigcontext *sc);
+extern asmlinkage int (*restore_fp_context)(struct sigcontext *sc);
+
+extern asmlinkage int (*save_fp_context32)(struct sigcontext32 *sc);
+extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 *sc);
+
+extern void fpu_emulator_init_fpu(void);
+extern void _init_fpu(void);
+extern void _save_fp(struct task_struct *);
+extern void _restore_fp(struct task_struct *);
+
+#if defined(CONFIG_CPU_SB1)
+#define __enable_fpu_hazard()						\
+do {									\
+	asm(".set	push		\n\t"				\
+	    ".set	mips64		\n\t"				\
+	    ".set	noreorder	\n\t"				\
+	    "ssnop			\n\t"				\
+	    "bnezl	$0, .+4		\n\t"				\
+	    "ssnop			\n\t"				\
+	    ".set pop");						\
+} while (0)
+#else
+#define __enable_fpu_hazard()						\
+do {									\
+	asm("nop;nop;nop;nop");		/* max. hazard */		\
+} while (0)
+#endif
+
+#define __enable_fpu()							\
+do {									\
+        set_c0_status(ST0_CU1);						\
+        __enable_fpu_hazard();						\
+} while (0)
+
+#define __disable_fpu()							\
+do {									\
+	clear_c0_status(ST0_CU1);					\
+	/* We don't care about the c0 hazard here  */			\
+} while (0)
+
+#define enable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__enable_fpu();						\
+} while (0)
+
+#define disable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__disable_fpu();					\
+} while (0)
+
+
+#define clear_fpu_owner()	clear_thread_flag(TIF_USEDFPU)
+
+static inline int is_fpu_owner(void)
+{
+	return cpu_has_fpu && test_thread_flag(TIF_USEDFPU); 
+}
+
+static inline void own_fpu(void)
+{
+	if (cpu_has_fpu) {
+		__enable_fpu();
+		KSTK_STATUS(current) |= ST0_CU1;
+		set_thread_flag(TIF_USEDFPU); 
+	}
+}
+
+static inline void lose_fpu(void)
+{
+	if (cpu_has_fpu) {
+		KSTK_STATUS(current) &= ~ST0_CU1;
+		clear_thread_flag(TIF_USEDFPU); 
+		__disable_fpu();
+	}
+}
+
+static inline void init_fpu(void)
+{
+	if (cpu_has_fpu) {
+		_init_fpu();
+	} else {
+		fpu_emulator_init_fpu();
+	}
+}
+
+static inline void save_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_save_fp(tsk);
+}
+
+static inline void restore_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_restore_fp(tsk);
+}
+
+static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
+{
+	if (cpu_has_fpu) {
+		if ((tsk == current) && is_fpu_owner()) 
+			_save_fp(current);
+		return tsk->thread.fpu.hard.fpr;
+	}
+
+	return tsk->thread.fpu.soft.fpr;
+}
+
+#endif /* _ASM_FPU_H */
diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h
new file mode 100644
index 000000000000..46972ae2b95d
--- /dev/null
+++ b/include/asm-mips/fpu_emulator.h
@@ -0,0 +1,38 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Further private data for which no space exists in mips_fpu_soft_struct.
+ * This should be subsumed into the mips_fpu_soft_struct structure as
+ * defined in processor.h as soon as the absurd wired absolute assembler
+ * offsets become dynamic at compile time.
+ *
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#ifndef _ASM_FPU_EMULATOR_H
+#define _ASM_FPU_EMULATOR_H
+
+struct mips_fpu_emulator_private {
+	unsigned int eir;
+	struct {
+		unsigned int emulated;
+		unsigned int loads;
+		unsigned int stores;
+		unsigned int cp1ops;
+		unsigned int cp1xops;
+		unsigned int errors;
+	} stats;
+};
+
+#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/include/asm-mips/galileo-boards/ev96100.h b/include/asm-mips/galileo-boards/ev96100.h
new file mode 100644
index 000000000000..070dfd84a8e8
--- /dev/null
+++ b/include/asm-mips/galileo-boards/ev96100.h
@@ -0,0 +1,55 @@
+/*
+ *
+ */
+#ifndef _MIPS_EV96100_H
+#define _MIPS_EV96100_H
+
+#include <asm/addrspace.h>
+
+/*
+ *   GT64120 config space base address
+ */
+#define GT64120_BASE	(KSEG1ADDR(0x14000000))
+#define MIPS_GT_BASE	GT64120_BASE
+
+/*
+ *   PCI Bus allocation
+ */
+#define GT_PCI_MEM_BASE    0x12000000UL
+#define GT_PCI_MEM_SIZE    0x02000000UL
+#define GT_PCI_IO_BASE     0x10000000UL
+#define GT_PCI_IO_SIZE     0x02000000UL
+#define GT_ISA_IO_BASE     PCI_IO_BASE
+
+/*
+ *   Duart I/O ports.
+ */
+#define EV96100_COM1_BASE_ADDR 	(0xBD000000 + 0x20)
+#define EV96100_COM2_BASE_ADDR	(0xBD000000 + 0x00)
+
+
+/*
+ *   EV96100 interrupt controller register base.
+ */
+#define EV96100_ICTRL_REGS_BASE	(KSEG1ADDR(0x1f000000))
+
+/*
+ *   EV96100 UART register base.
+ */
+#define EV96100_UART0_REGS_BASE	EV96100_COM1_BASE_ADDR
+#define EV96100_UART1_REGS_BASE	EV96100_COM2_BASE_ADDR
+#define EV96100_BASE_BAUD	( 3686400 / 16 )
+
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.
+ */
+#define __GT_READ(ofs)							\
+	(*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs)		le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data)	__GT_WRITE(ofs, cpu_to_le32(data))
+
+#endif /* !(_MIPS_EV96100_H) */
diff --git a/include/asm-mips/galileo-boards/ev96100int.h b/include/asm-mips/galileo-boards/ev96100int.h
new file mode 100644
index 000000000000..c58b16d06d6e
--- /dev/null
+++ b/include/asm-mips/galileo-boards/ev96100int.h
@@ -0,0 +1,12 @@
+/*
+ *
+ */
+#ifndef _MIPS_EV96100INT_H
+#define _MIPS_EV96100INT_H
+
+#define EV96100INT_UART_0    6     /* IP 6 */
+#define EV96100INT_TIMER     7     /* IP 7 */
+
+extern void ev96100int_init(void);
+
+#endif /* !(_MIPS_EV96100_H) */
diff --git a/include/asm-mips/galileo-boards/gt96100.h b/include/asm-mips/galileo-boards/gt96100.h
new file mode 100644
index 000000000000..aabd1b629c19
--- /dev/null
+++ b/include/asm-mips/galileo-boards/gt96100.h
@@ -0,0 +1,427 @@
+/*
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Register offsets of the MIPS GT96100 Advanced Communication Controller.
+ */
+#ifndef _GT96100_H
+#define _GT96100_H
+
+/*
+ * Galileo GT96100 internal register base.
+ */
+#define MIPS_GT96100_BASE (KSEG1ADDR(0x14000000))
+
+#define GT96100_WRITE(ofs, data) \
+    *(volatile u32 *)(MIPS_GT96100_BASE+ofs) = cpu_to_le32(data)
+#define GT96100_READ(ofs) \
+    le32_to_cpu(*(volatile u32 *)(MIPS_GT96100_BASE+ofs))
+
+#define GT96100_ETH_IO_SIZE 0x4000
+
+/************************************************************************
+ *  Register offset addresses follow
+ ************************************************************************/
+
+/* CPU Interface Control Registers */
+#define GT96100_CPU_INTERF_CONFIG 0x000000
+
+/* Ethernet Ports */
+#define GT96100_ETH_PHY_ADDR_REG             0x080800
+#define GT96100_ETH_SMI_REG                  0x080810
+/*
+  These are offsets to port 0 registers. Add GT96100_ETH_IO_SIZE to
+  get offsets to port 1 registers.
+*/
+#define GT96100_ETH_PORT_CONFIG          0x084800
+#define GT96100_ETH_PORT_CONFIG_EXT      0x084808
+#define GT96100_ETH_PORT_COMM            0x084810
+#define GT96100_ETH_PORT_STATUS          0x084818
+#define GT96100_ETH_SER_PARAM            0x084820
+#define GT96100_ETH_HASH_TBL_PTR         0x084828
+#define GT96100_ETH_FLOW_CNTRL_SRC_ADDR_L    0x084830
+#define GT96100_ETH_FLOW_CNTRL_SRC_ADDR_H    0x084838
+#define GT96100_ETH_SDMA_CONFIG          0x084840
+#define GT96100_ETH_SDMA_COMM            0x084848
+#define GT96100_ETH_INT_CAUSE            0x084850
+#define GT96100_ETH_INT_MASK             0x084858
+#define GT96100_ETH_1ST_RX_DESC_PTR0         0x084880
+#define GT96100_ETH_1ST_RX_DESC_PTR1         0x084884
+#define GT96100_ETH_1ST_RX_DESC_PTR2         0x084888
+#define GT96100_ETH_1ST_RX_DESC_PTR3         0x08488C
+#define GT96100_ETH_CURR_RX_DESC_PTR0        0x0848A0
+#define GT96100_ETH_CURR_RX_DESC_PTR1        0x0848A4
+#define GT96100_ETH_CURR_RX_DESC_PTR2        0x0848A8
+#define GT96100_ETH_CURR_RX_DESC_PTR3        0x0848AC
+#define GT96100_ETH_CURR_TX_DESC_PTR0        0x0848E0
+#define GT96100_ETH_CURR_TX_DESC_PTR1        0x0848E4
+#define GT96100_ETH_MIB_COUNT_BASE           0x085800
+
+/* SDMAs */
+#define GT96100_SDMA_GROUP_CONFIG           0x101AF0
+/* SDMA Group 0 */
+#define GT96100_SDMA_G0_CHAN0_CONFIG        0x000900
+#define GT96100_SDMA_G0_CHAN0_COMM          0x000908
+#define GT96100_SDMA_G0_CHAN0_RX_DESC_BASE      0x008900
+#define GT96100_SDMA_G0_CHAN0_CURR_RX_DESC_PTR  0x008910
+#define GT96100_SDMA_G0_CHAN0_TX_DESC_BASE      0x00C900
+#define GT96100_SDMA_G0_CHAN0_CURR_TX_DESC_PTR  0x00C910
+#define GT96100_SDMA_G0_CHAN0_1ST_TX_DESC_PTR   0x00C914
+#define GT96100_SDMA_G0_CHAN1_CONFIG        0x010900
+#define GT96100_SDMA_G0_CHAN1_COMM          0x010908
+#define GT96100_SDMA_G0_CHAN1_RX_DESC_BASE      0x018900
+#define GT96100_SDMA_G0_CHAN1_CURR_RX_DESC_PTR  0x018910
+#define GT96100_SDMA_G0_CHAN1_TX_DESC_BASE      0x01C900
+#define GT96100_SDMA_G0_CHAN1_CURR_TX_DESC_PTR  0x01C910
+#define GT96100_SDMA_G0_CHAN1_1ST_TX_DESC_PTR   0x01C914
+#define GT96100_SDMA_G0_CHAN2_CONFIG        0x020900
+#define GT96100_SDMA_G0_CHAN2_COMM          0x020908
+#define GT96100_SDMA_G0_CHAN2_RX_DESC_BASE      0x028900
+#define GT96100_SDMA_G0_CHAN2_CURR_RX_DESC_PTR  0x028910
+#define GT96100_SDMA_G0_CHAN2_TX_DESC_BASE      0x02C900
+#define GT96100_SDMA_G0_CHAN2_CURR_TX_DESC_PTR  0x02C910
+#define GT96100_SDMA_G0_CHAN2_1ST_TX_DESC_PTR   0x02C914
+#define GT96100_SDMA_G0_CHAN3_CONFIG        0x030900
+#define GT96100_SDMA_G0_CHAN3_COMM          0x030908
+#define GT96100_SDMA_G0_CHAN3_RX_DESC_BASE      0x038900
+#define GT96100_SDMA_G0_CHAN3_CURR_RX_DESC_PTR  0x038910
+#define GT96100_SDMA_G0_CHAN3_TX_DESC_BASE      0x03C900
+#define GT96100_SDMA_G0_CHAN3_CURR_TX_DESC_PTR  0x03C910
+#define GT96100_SDMA_G0_CHAN3_1ST_TX_DESC_PTR   0x03C914
+#define GT96100_SDMA_G0_CHAN4_CONFIG        0x040900
+#define GT96100_SDMA_G0_CHAN4_COMM          0x040908
+#define GT96100_SDMA_G0_CHAN4_RX_DESC_BASE      0x048900
+#define GT96100_SDMA_G0_CHAN4_CURR_RX_DESC_PTR  0x048910
+#define GT96100_SDMA_G0_CHAN4_TX_DESC_BASE      0x04C900
+#define GT96100_SDMA_G0_CHAN4_CURR_TX_DESC_PTR  0x04C910
+#define GT96100_SDMA_G0_CHAN4_1ST_TX_DESC_PTR   0x04C914
+#define GT96100_SDMA_G0_CHAN5_CONFIG        0x050900
+#define GT96100_SDMA_G0_CHAN5_COMM          0x050908
+#define GT96100_SDMA_G0_CHAN5_RX_DESC_BASE      0x058900
+#define GT96100_SDMA_G0_CHAN5_CURR_RX_DESC_PTR  0x058910
+#define GT96100_SDMA_G0_CHAN5_TX_DESC_BASE      0x05C900
+#define GT96100_SDMA_G0_CHAN5_CURR_TX_DESC_PTR  0x05C910
+#define GT96100_SDMA_G0_CHAN5_1ST_TX_DESC_PTR   0x05C914
+#define GT96100_SDMA_G0_CHAN6_CONFIG        0x060900
+#define GT96100_SDMA_G0_CHAN6_COMM          0x060908
+#define GT96100_SDMA_G0_CHAN6_RX_DESC_BASE      0x068900
+#define GT96100_SDMA_G0_CHAN6_CURR_RX_DESC_PTR  0x068910
+#define GT96100_SDMA_G0_CHAN6_TX_DESC_BASE      0x06C900
+#define GT96100_SDMA_G0_CHAN6_CURR_TX_DESC_PTR  0x06C910
+#define GT96100_SDMA_G0_CHAN6_1ST_TX_DESC_PTR   0x06C914
+#define GT96100_SDMA_G0_CHAN7_CONFIG        0x070900
+#define GT96100_SDMA_G0_CHAN7_COMM          0x070908
+#define GT96100_SDMA_G0_CHAN7_RX_DESC_BASE      0x078900
+#define GT96100_SDMA_G0_CHAN7_CURR_RX_DESC_PTR  0x078910
+#define GT96100_SDMA_G0_CHAN7_TX_DESC_BASE      0x07C900
+#define GT96100_SDMA_G0_CHAN7_CURR_TX_DESC_PTR  0x07C910
+#define GT96100_SDMA_G0_CHAN7_1ST_TX_DESC_PTR   0x07C914
+/* SDMA Group 1 */
+#define GT96100_SDMA_G1_CHAN0_CONFIG        0x100900
+#define GT96100_SDMA_G1_CHAN0_COMM          0x100908
+#define GT96100_SDMA_G1_CHAN0_RX_DESC_BASE      0x108900
+#define GT96100_SDMA_G1_CHAN0_CURR_RX_DESC_PTR  0x108910
+#define GT96100_SDMA_G1_CHAN0_TX_DESC_BASE      0x10C900
+#define GT96100_SDMA_G1_CHAN0_CURR_TX_DESC_PTR  0x10C910
+#define GT96100_SDMA_G1_CHAN0_1ST_TX_DESC_PTR   0x10C914
+#define GT96100_SDMA_G1_CHAN1_CONFIG        0x110900
+#define GT96100_SDMA_G1_CHAN1_COMM          0x110908
+#define GT96100_SDMA_G1_CHAN1_RX_DESC_BASE      0x118900
+#define GT96100_SDMA_G1_CHAN1_CURR_RX_DESC_PTR  0x118910
+#define GT96100_SDMA_G1_CHAN1_TX_DESC_BASE      0x11C900
+#define GT96100_SDMA_G1_CHAN1_CURR_TX_DESC_PTR  0x11C910
+#define GT96100_SDMA_G1_CHAN1_1ST_TX_DESC_PTR   0x11C914
+#define GT96100_SDMA_G1_CHAN2_CONFIG        0x120900
+#define GT96100_SDMA_G1_CHAN2_COMM          0x120908
+#define GT96100_SDMA_G1_CHAN2_RX_DESC_BASE      0x128900
+#define GT96100_SDMA_G1_CHAN2_CURR_RX_DESC_PTR  0x128910
+#define GT96100_SDMA_G1_CHAN2_TX_DESC_BASE      0x12C900
+#define GT96100_SDMA_G1_CHAN2_CURR_TX_DESC_PTR  0x12C910
+#define GT96100_SDMA_G1_CHAN2_1ST_TX_DESC_PTR   0x12C914
+#define GT96100_SDMA_G1_CHAN3_CONFIG        0x130900
+#define GT96100_SDMA_G1_CHAN3_COMM          0x130908
+#define GT96100_SDMA_G1_CHAN3_RX_DESC_BASE      0x138900
+#define GT96100_SDMA_G1_CHAN3_CURR_RX_DESC_PTR  0x138910
+#define GT96100_SDMA_G1_CHAN3_TX_DESC_BASE      0x13C900
+#define GT96100_SDMA_G1_CHAN3_CURR_TX_DESC_PTR  0x13C910
+#define GT96100_SDMA_G1_CHAN3_1ST_TX_DESC_PTR   0x13C914
+#define GT96100_SDMA_G1_CHAN4_CONFIG        0x140900
+#define GT96100_SDMA_G1_CHAN4_COMM          0x140908
+#define GT96100_SDMA_G1_CHAN4_RX_DESC_BASE      0x148900
+#define GT96100_SDMA_G1_CHAN4_CURR_RX_DESC_PTR  0x148910
+#define GT96100_SDMA_G1_CHAN4_TX_DESC_BASE      0x14C900
+#define GT96100_SDMA_G1_CHAN4_CURR_TX_DESC_PTR  0x14C910
+#define GT96100_SDMA_G1_CHAN4_1ST_TX_DESC_PTR   0x14C914
+#define GT96100_SDMA_G1_CHAN5_CONFIG        0x150900
+#define GT96100_SDMA_G1_CHAN5_COMM          0x150908
+#define GT96100_SDMA_G1_CHAN5_RX_DESC_BASE      0x158900
+#define GT96100_SDMA_G1_CHAN5_CURR_RX_DESC_PTR  0x158910
+#define GT96100_SDMA_G1_CHAN5_TX_DESC_BASE      0x15C900
+#define GT96100_SDMA_G1_CHAN5_CURR_TX_DESC_PTR  0x15C910
+#define GT96100_SDMA_G1_CHAN5_1ST_TX_DESC_PTR   0x15C914
+#define GT96100_SDMA_G1_CHAN6_CONFIG        0x160900
+#define GT96100_SDMA_G1_CHAN6_COMM          0x160908
+#define GT96100_SDMA_G1_CHAN6_RX_DESC_BASE      0x168900
+#define GT96100_SDMA_G1_CHAN6_CURR_RX_DESC_PTR  0x168910
+#define GT96100_SDMA_G1_CHAN6_TX_DESC_BASE      0x16C900
+#define GT96100_SDMA_G1_CHAN6_CURR_TX_DESC_PTR  0x16C910
+#define GT96100_SDMA_G1_CHAN6_1ST_TX_DESC_PTR   0x16C914
+#define GT96100_SDMA_G1_CHAN7_CONFIG        0x170900
+#define GT96100_SDMA_G1_CHAN7_COMM          0x170908
+#define GT96100_SDMA_G1_CHAN7_RX_DESC_BASE      0x178900
+#define GT96100_SDMA_G1_CHAN7_CURR_RX_DESC_PTR  0x178910
+#define GT96100_SDMA_G1_CHAN7_TX_DESC_BASE      0x17C900
+#define GT96100_SDMA_G1_CHAN7_CURR_TX_DESC_PTR  0x17C910
+#define GT96100_SDMA_G1_CHAN7_1ST_TX_DESC_PTR   0x17C914
+/*  MPSCs  */
+#define GT96100_MPSC0_MAIN_CONFIG_LOW   0x000A00
+#define GT96100_MPSC0_MAIN_CONFIG_HIGH  0x000A04
+#define GT96100_MPSC0_PROTOCOL_CONFIG   0x000A08
+#define GT96100_MPSC_CHAN0_REG1         0x000A0C
+#define GT96100_MPSC_CHAN0_REG2         0x000A10
+#define GT96100_MPSC_CHAN0_REG3         0x000A14
+#define GT96100_MPSC_CHAN0_REG4         0x000A18
+#define GT96100_MPSC_CHAN0_REG5         0x000A1C
+#define GT96100_MPSC_CHAN0_REG6         0x000A20
+#define GT96100_MPSC_CHAN0_REG7         0x000A24
+#define GT96100_MPSC_CHAN0_REG8         0x000A28
+#define GT96100_MPSC_CHAN0_REG9         0x000A2C
+#define GT96100_MPSC_CHAN0_REG10        0x000A30
+#define GT96100_MPSC_CHAN0_REG11        0x000A34
+#define GT96100_MPSC1_MAIN_CONFIG_LOW   0x008A00
+#define GT96100_MPSC1_MAIN_CONFIG_HIGH  0x008A04
+#define GT96100_MPSC1_PROTOCOL_CONFIG   0x008A08
+#define GT96100_MPSC_CHAN1_REG1         0x008A0C
+#define GT96100_MPSC_CHAN1_REG2         0x008A10
+#define GT96100_MPSC_CHAN1_REG3         0x008A14
+#define GT96100_MPSC_CHAN1_REG4         0x008A18
+#define GT96100_MPSC_CHAN1_REG5         0x008A1C
+#define GT96100_MPSC_CHAN1_REG6         0x008A20
+#define GT96100_MPSC_CHAN1_REG7         0x008A24
+#define GT96100_MPSC_CHAN1_REG8         0x008A28
+#define GT96100_MPSC_CHAN1_REG9         0x008A2C
+#define GT96100_MPSC_CHAN1_REG10        0x008A30
+#define GT96100_MPSC_CHAN1_REG11        0x008A34
+#define GT96100_MPSC2_MAIN_CONFIG_LOW   0x010A00
+#define GT96100_MPSC2_MAIN_CONFIG_HIGH  0x010A04
+#define GT96100_MPSC2_PROTOCOL_CONFIG   0x010A08
+#define GT96100_MPSC_CHAN2_REG1         0x010A0C
+#define GT96100_MPSC_CHAN2_REG2         0x010A10
+#define GT96100_MPSC_CHAN2_REG3         0x010A14
+#define GT96100_MPSC_CHAN2_REG4         0x010A18
+#define GT96100_MPSC_CHAN2_REG5         0x010A1C
+#define GT96100_MPSC_CHAN2_REG6         0x010A20
+#define GT96100_MPSC_CHAN2_REG7         0x010A24
+#define GT96100_MPSC_CHAN2_REG8         0x010A28
+#define GT96100_MPSC_CHAN2_REG9         0x010A2C
+#define GT96100_MPSC_CHAN2_REG10        0x010A30
+#define GT96100_MPSC_CHAN2_REG11        0x010A34
+#define GT96100_MPSC3_MAIN_CONFIG_LOW   0x018A00
+#define GT96100_MPSC3_MAIN_CONFIG_HIGH  0x018A04
+#define GT96100_MPSC3_PROTOCOL_CONFIG   0x018A08
+#define GT96100_MPSC_CHAN3_REG1         0x018A0C
+#define GT96100_MPSC_CHAN3_REG2         0x018A10
+#define GT96100_MPSC_CHAN3_REG3         0x018A14
+#define GT96100_MPSC_CHAN3_REG4         0x018A18
+#define GT96100_MPSC_CHAN3_REG5         0x018A1C
+#define GT96100_MPSC_CHAN3_REG6         0x018A20
+#define GT96100_MPSC_CHAN3_REG7         0x018A24
+#define GT96100_MPSC_CHAN3_REG8         0x018A28
+#define GT96100_MPSC_CHAN3_REG9         0x018A2C
+#define GT96100_MPSC_CHAN3_REG10        0x018A30
+#define GT96100_MPSC_CHAN3_REG11        0x018A34
+#define GT96100_MPSC4_MAIN_CONFIG_LOW   0x020A00
+#define GT96100_MPSC4_MAIN_CONFIG_HIGH  0x020A04
+#define GT96100_MPSC4_PROTOCOL_CONFIG   0x020A08
+#define GT96100_MPSC_CHAN4_REG1         0x020A0C
+#define GT96100_MPSC_CHAN4_REG2         0x020A10
+#define GT96100_MPSC_CHAN4_REG3         0x020A14
+#define GT96100_MPSC_CHAN4_REG4         0x020A18
+#define GT96100_MPSC_CHAN4_REG5         0x020A1C
+#define GT96100_MPSC_CHAN4_REG6         0x020A20
+#define GT96100_MPSC_CHAN4_REG7         0x020A24
+#define GT96100_MPSC_CHAN4_REG8         0x020A28
+#define GT96100_MPSC_CHAN4_REG9         0x020A2C
+#define GT96100_MPSC_CHAN4_REG10        0x020A30
+#define GT96100_MPSC_CHAN4_REG11        0x020A34
+#define GT96100_MPSC5_MAIN_CONFIG_LOW   0x028A00
+#define GT96100_MPSC5_MAIN_CONFIG_HIGH  0x028A04
+#define GT96100_MPSC5_PROTOCOL_CONFIG   0x028A08
+#define GT96100_MPSC_CHAN5_REG1         0x028A0C
+#define GT96100_MPSC_CHAN5_REG2         0x028A10
+#define GT96100_MPSC_CHAN5_REG3         0x028A14
+#define GT96100_MPSC_CHAN5_REG4         0x028A18
+#define GT96100_MPSC_CHAN5_REG5         0x028A1C
+#define GT96100_MPSC_CHAN5_REG6         0x028A20
+#define GT96100_MPSC_CHAN5_REG7         0x028A24
+#define GT96100_MPSC_CHAN5_REG8         0x028A28
+#define GT96100_MPSC_CHAN5_REG9         0x028A2C
+#define GT96100_MPSC_CHAN5_REG10        0x028A30
+#define GT96100_MPSC_CHAN5_REG11        0x028A34
+#define GT96100_MPSC6_MAIN_CONFIG_LOW   0x030A00
+#define GT96100_MPSC6_MAIN_CONFIG_HIGH  0x030A04
+#define GT96100_MPSC6_PROTOCOL_CONFIG   0x030A08
+#define GT96100_MPSC_CHAN6_REG1         0x030A0C
+#define GT96100_MPSC_CHAN6_REG2         0x030A10
+#define GT96100_MPSC_CHAN6_REG3         0x030A14
+#define GT96100_MPSC_CHAN6_REG4         0x030A18
+#define GT96100_MPSC_CHAN6_REG5         0x030A1C
+#define GT96100_MPSC_CHAN6_REG6         0x030A20
+#define GT96100_MPSC_CHAN6_REG7         0x030A24
+#define GT96100_MPSC_CHAN6_REG8         0x030A28
+#define GT96100_MPSC_CHAN6_REG9         0x030A2C
+#define GT96100_MPSC_CHAN6_REG10        0x030A30
+#define GT96100_MPSC_CHAN6_REG11        0x030A34
+#define GT96100_MPSC7_MAIN_CONFIG_LOW   0x038A00
+#define GT96100_MPSC7_MAIN_CONFIG_HIGH  0x038A04
+#define GT96100_MPSC7_PROTOCOL_CONFIG   0x038A08
+#define GT96100_MPSC_CHAN7_REG1         0x038A0C
+#define GT96100_MPSC_CHAN7_REG2         0x038A10
+#define GT96100_MPSC_CHAN7_REG3         0x038A14
+#define GT96100_MPSC_CHAN7_REG4         0x038A18
+#define GT96100_MPSC_CHAN7_REG5         0x038A1C
+#define GT96100_MPSC_CHAN7_REG6         0x038A20
+#define GT96100_MPSC_CHAN7_REG7         0x038A24
+#define GT96100_MPSC_CHAN7_REG8         0x038A28
+#define GT96100_MPSC_CHAN7_REG9         0x038A2C
+#define GT96100_MPSC_CHAN7_REG10        0x038A30
+#define GT96100_MPSC_CHAN7_REG11        0x038A34
+/*  FlexTDMs  */
+/* TDPR0 - Transmit Dual Port RAM. block size 0xff */
+#define GT96100_FXTDM0_TDPR0_BLK0_BASE  0x000B00
+#define GT96100_FXTDM0_TDPR0_BLK1_BASE  0x001B00
+#define GT96100_FXTDM0_TDPR0_BLK2_BASE  0x002B00
+#define GT96100_FXTDM0_TDPR0_BLK3_BASE  0x003B00
+/* RDPR0 - Receive Dual Port RAM. block size 0xff */
+#define GT96100_FXTDM0_RDPR0_BLK0_BASE  0x004B00
+#define GT96100_FXTDM0_RDPR0_BLK1_BASE  0x005B00
+#define GT96100_FXTDM0_RDPR0_BLK2_BASE  0x006B00
+#define GT96100_FXTDM0_RDPR0_BLK3_BASE  0x007B00
+#define GT96100_FXTDM0_TX_READ_PTR      0x008B00
+#define GT96100_FXTDM0_RX_READ_PTR      0x008B04
+#define GT96100_FXTDM0_CONFIG       0x008B08
+#define GT96100_FXTDM0_AUX_CHANA_TX 0x008B0C
+#define GT96100_FXTDM0_AUX_CHANA_RX 0x008B10
+#define GT96100_FXTDM0_AUX_CHANB_TX 0x008B14
+#define GT96100_FXTDM0_AUX_CHANB_RX 0x008B18
+#define GT96100_FXTDM1_TDPR1_BLK0_BASE  0x010B00
+#define GT96100_FXTDM1_TDPR1_BLK1_BASE  0x011B00
+#define GT96100_FXTDM1_TDPR1_BLK2_BASE  0x012B00
+#define GT96100_FXTDM1_TDPR1_BLK3_BASE  0x013B00
+#define GT96100_FXTDM1_RDPR1_BLK0_BASE  0x014B00
+#define GT96100_FXTDM1_RDPR1_BLK1_BASE  0x015B00
+#define GT96100_FXTDM1_RDPR1_BLK2_BASE  0x016B00
+#define GT96100_FXTDM1_RDPR1_BLK3_BASE  0x017B00
+#define GT96100_FXTDM1_TX_READ_PTR      0x018B00
+#define GT96100_FXTDM1_RX_READ_PTR      0x018B04
+#define GT96100_FXTDM1_CONFIG       0x018B08
+#define GT96100_FXTDM1_AUX_CHANA_TX 0x018B0C
+#define GT96100_FXTDM1_AUX_CHANA_RX 0x018B10
+#define GT96100_FLTDM1_AUX_CHANB_TX 0x018B14
+#define GT96100_FLTDM1_AUX_CHANB_RX 0x018B18
+#define GT96100_FLTDM2_TDPR2_BLK0_BASE  0x020B00
+#define GT96100_FLTDM2_TDPR2_BLK1_BASE  0x021B00
+#define GT96100_FLTDM2_TDPR2_BLK2_BASE  0x022B00
+#define GT96100_FLTDM2_TDPR2_BLK3_BASE  0x023B00
+#define GT96100_FLTDM2_RDPR2_BLK0_BASE  0x024B00
+#define GT96100_FLTDM2_RDPR2_BLK1_BASE  0x025B00
+#define GT96100_FLTDM2_RDPR2_BLK2_BASE  0x026B00
+#define GT96100_FLTDM2_RDPR2_BLK3_BASE  0x027B00
+#define GT96100_FLTDM2_TX_READ_PTR      0x028B00
+#define GT96100_FLTDM2_RX_READ_PTR      0x028B04
+#define GT96100_FLTDM2_CONFIG       0x028B08
+#define GT96100_FLTDM2_AUX_CHANA_TX 0x028B0C
+#define GT96100_FLTDM2_AUX_CHANA_RX 0x028B10
+#define GT96100_FLTDM2_AUX_CHANB_TX 0x028B14
+#define GT96100_FLTDM2_AUX_CHANB_RX 0x028B18
+#define GT96100_FLTDM3_TDPR3_BLK0_BASE  0x030B00
+#define GT96100_FLTDM3_TDPR3_BLK1_BASE  0x031B00
+#define GT96100_FLTDM3_TDPR3_BLK2_BASE  0x032B00
+#define GT96100_FLTDM3_TDPR3_BLK3_BASE  0x033B00
+#define GT96100_FXTDM3_RDPR3_BLK0_BASE  0x034B00
+#define GT96100_FXTDM3_RDPR3_BLK1_BASE  0x035B00
+#define GT96100_FXTDM3_RDPR3_BLK2_BASE  0x036B00
+#define GT96100_FXTDM3_RDPR3_BLK3_BASE  0x037B00
+#define GT96100_FXTDM3_TX_READ_PTR      0x038B00
+#define GT96100_FXTDM3_RX_READ_PTR      0x038B04
+#define GT96100_FXTDM3_CONFIG       0x038B08
+#define GT96100_FXTDM3_AUX_CHANA_TX 0x038B0C
+#define GT96100_FXTDM3_AUX_CHANA_RX 0x038B10
+#define GT96100_FXTDM3_AUX_CHANB_TX 0x038B14
+#define GT96100_FXTDM3_AUX_CHANB_RX 0x038B18
+/*  Baud Rate Generators  */
+#define GT96100_BRG0_CONFIG     0x102A00
+#define GT96100_BRG0_BAUD_TUNE  0x102A04
+#define GT96100_BRG1_CONFIG     0x102A08
+#define GT96100_BRG1_BAUD_TUNE  0x102A0C
+#define GT96100_BRG2_CONFIG     0x102A10
+#define GT96100_BRG2_BAUD_TUNE  0x102A14
+#define GT96100_BRG3_CONFIG     0x102A18
+#define GT96100_BRG3_BAUD_TUNE  0x102A1C
+#define GT96100_BRG4_CONFIG     0x102A20
+#define GT96100_BRG4_BAUD_TUNE  0x102A24
+#define GT96100_BRG5_CONFIG     0x102A28
+#define GT96100_BRG5_BAUD_TUNE  0x102A2C
+#define GT96100_BRG6_CONFIG     0x102A30
+#define GT96100_BRG6_BAUD_TUNE  0x102A34
+#define GT96100_BRG7_CONFIG     0x102A38
+#define GT96100_BRG7_BAUD_TUNE  0x102A3C
+/*  Routing Registers  */
+#define GT96100_ROUTE_MAIN      0x101A00
+#define GT96100_ROUTE_RX_CLOCK  0x101A10
+#define GT96100_ROUTE_TX_CLOCK  0x101A20
+/*  General Purpose Ports  */
+#define GT96100_GPP_CONFIG0     0x100A00
+#define GT96100_GPP_CONFIG1     0x100A04
+#define GT96100_GPP_CONFIG2     0x100A08
+#define GT96100_GPP_CONFIG3     0x100A0C
+#define GT96100_GPP_IO0         0x100A20
+#define GT96100_GPP_IO1         0x100A24
+#define GT96100_GPP_IO2         0x100A28
+#define GT96100_GPP_IO3         0x100A2C
+#define GT96100_GPP_DATA0       0x100A40
+#define GT96100_GPP_DATA1       0x100A44
+#define GT96100_GPP_DATA2       0x100A48
+#define GT96100_GPP_DATA3       0x100A4C
+#define GT96100_GPP_LEVEL0      0x100A60
+#define GT96100_GPP_LEVEL1      0x100A64
+#define GT96100_GPP_LEVEL2      0x100A68
+#define GT96100_GPP_LEVEL3      0x100A6C
+/*  Watchdog  */
+#define GT96100_WD_CONFIG   0x101A80
+#define GT96100_WD_VALUE    0x101A84
+/* Communication Unit Arbiter  */
+#define GT96100_COMM_UNIT_ARBTR_CONFIG 0x101AC0
+/*  PCI Arbiters  */
+#define GT96100_PCI0_ARBTR_CONFIG 0x101AE0
+#define GT96100_PCI1_ARBTR_CONFIG 0x101AE4
+/* CIU Arbiter */
+#define GT96100_CIU_ARBITER_CONFIG 0x101AC0
+/* Interrupt Controller */
+#define GT96100_MAIN_CAUSE     0x000C18
+#define GT96100_INT0_MAIN_MASK 0x000C1C
+#define GT96100_INT1_MAIN_MASK 0x000C24
+#define GT96100_HIGH_CAUSE     0x000C98
+#define GT96100_INT0_HIGH_MASK 0x000C9C
+#define GT96100_INT1_HIGH_MASK 0x000CA4
+#define GT96100_INT0_SELECT    0x000C70
+#define GT96100_INT1_SELECT    0x000C74
+#define GT96100_SERIAL_CAUSE   0x103A00
+#define GT96100_SERINT0_MASK   0x103A80
+#define GT96100_SERINT1_MASK   0x103A88
+
+#endif /*  _GT96100_H */
diff --git a/include/asm-mips/gcc/sgidefs.h b/include/asm-mips/gcc/sgidefs.h
new file mode 100644
index 000000000000..05994371a2af
--- /dev/null
+++ b/include/asm-mips/gcc/sgidefs.h
@@ -0,0 +1,17 @@
+/*
+ * include/sgidefs.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996 by Ralf Baechle
+ *
+ * This file is here to satisfy GCC's expectations.
+ */
+#ifndef __SGIDEFS_H
+#define __SGIDEFS_H
+
+#include <asm/sgidefs.h>
+
+#endif /* __SGIDEFS_H */
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
new file mode 100644
index 000000000000..22f67d4a71ab
--- /dev/null
+++ b/include/asm-mips/gdb-stub.h
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 Andreas Busse
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+
+/*
+ * important register numbers
+ */
+
+#define REG_EPC			37
+#define REG_FP			72
+#define REG_SP			29
+
+/*
+ * Stack layout for the GDB exception handler
+ * Derived from the stack layout described in asm-mips/stackframe.h
+ *
+ * The first PTRSIZE*6 bytes are argument save space for C subroutines.
+ */
+#define NUMREGS			90
+
+#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
+#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
+#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
+#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
+#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
+#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
+#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
+#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
+#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
+#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
+#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
+#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
+#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
+#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
+#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
+#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
+#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
+#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
+#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
+#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
+#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
+#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
+#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
+#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
+#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
+#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
+#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
+#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
+#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
+#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
+#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
+#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
+
+/*
+ * Saved special registers
+ */
+#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
+#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
+#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
+#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
+#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
+#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
+
+/*
+ * Saved floating point registers
+ */
+#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
+#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
+#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
+#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
+#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
+#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
+#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
+#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
+#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
+#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
+#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
+#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
+#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
+#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
+#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
+#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
+#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
+#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
+#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
+#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
+#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
+#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
+#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
+#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
+#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
+#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
+#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
+#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
+#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
+#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
+#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
+#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
+
+#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
+#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
+#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
+
+#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
+
+/*
+ * Again, CP0 registers
+ */
+#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
+#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
+#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
+#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
+#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
+#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
+#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
+#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
+#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
+#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
+#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
+#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
+#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
+#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
+#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
+#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
+
+#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+	/*
+	 * Pad bytes for argument save space on the stack
+	 * 24/48 Bytes for 32/64 bit code
+	 */
+	unsigned long pad0[6];
+
+	/*
+	 * saved main processor registers
+	 */
+	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
+	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
+	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
+	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
+
+	/*
+	 * Saved special registers
+	 */
+	long	cp0_status;
+	long	lo;
+	long	hi;
+	long	cp0_badvaddr;
+	long	cp0_cause;
+	long	cp0_epc;
+
+	/*
+	 * Saved floating point registers
+	 */
+	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
+	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
+	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
+	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
+
+	long	cp1_fsr;
+	long	cp1_fir;
+
+	/*
+	 * Frame pointer
+	 */
+	long	frame_ptr;
+	long    dummy;		/* unused */
+
+	/*
+	 * saved cp0 registers
+	 */
+	long	cp0_index;
+	long	cp0_random;
+	long	cp0_entrylo0;
+	long	cp0_entrylo1;
+	long	cp0_context;
+	long	cp0_pagemask;
+	long	cp0_wired;
+	long	cp0_reg7;
+	long	cp0_reg8;
+	long	cp0_reg9;
+	long	cp0_entryhi;
+	long	cp0_reg11;
+	long	cp0_reg12;
+	long	cp0_reg13;
+	long	cp0_reg14;
+	long	cp0_prid;
+};
+
+/*
+ * Prototypes
+ */
+
+extern int kgdb_enabled;
+void set_debug_traps(void);
+void set_async_breakpoint(unsigned long *epc);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/gfx.h b/include/asm-mips/gfx.h
new file mode 100644
index 000000000000..37235e41a6fd
--- /dev/null
+++ b/include/asm-mips/gfx.h
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This is the user-visible SGI GFX interface.
+ *
+ * This must be used verbatim into the GNU libc.  It does not include
+ * any kernel-only bits on it.
+ *
+ * miguel@nuclecu.unam.mx
+ */
+#ifndef _ASM_GFX_H
+#define _ASM_GFX_H
+
+/* The iocls, yes, they do not make sense, but such is life */
+#define GFX_BASE             100
+#define GFX_GETNUM_BOARDS    (GFX_BASE + 1)
+#define GFX_GETBOARD_INFO    (GFX_BASE + 2)
+#define GFX_ATTACH_BOARD     (GFX_BASE + 3)
+#define GFX_DETACH_BOARD     (GFX_BASE + 4)
+#define GFX_IS_MANAGED       (GFX_BASE + 5)
+
+#define GFX_MAPALL           (GFX_BASE + 10)
+#define GFX_LABEL            (GFX_BASE + 11)
+
+#define GFX_INFO_NAME_SIZE  16
+#define GFX_INFO_LABEL_SIZE 16
+
+struct gfx_info {
+	char name  [GFX_INFO_NAME_SIZE];  /* board name */
+	char label [GFX_INFO_LABEL_SIZE]; /* label name */
+	unsigned short int xpmax, ypmax;  /* screen resolution */
+	unsigned int lenght;	          /* size of a complete gfx_info for this board */
+};
+
+struct gfx_getboardinfo_args {
+	unsigned int board;     /* board number.  starting from zero */
+	void *buf;              /* pointer to gfx_info */
+	unsigned int len;       /* buffer size of buf */
+};
+
+struct gfx_attach_board_args {
+	unsigned int board;	/* board number, starting from zero */
+	void        *vaddr;	/* address where the board registers should be mapped */
+};
+
+#ifdef __KERNEL__
+/* umap.c */
+extern void remove_mapping (struct vm_area_struct *vma, struct task_struct *, unsigned long, unsigned long);
+extern void *vmalloc_uncached (unsigned long size);
+extern int vmap_page_range (struct vm_area_struct *vma, unsigned long from, unsigned long size, unsigned long vaddr);
+#endif
+
+#endif /* _ASM_GFX_H */
diff --git a/include/asm-mips/gt64120.h b/include/asm-mips/gt64120.h
new file mode 100644
index 000000000000..2edd171bb6cd
--- /dev/null
+++ b/include/asm-mips/gt64120.h
@@ -0,0 +1,561 @@
+/*
+ * Copyright (C) 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _ASM_GT64120_H
+#define _ASM_GT64120_H
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#define MSK(n)			((1 << (n)) - 1)
+
+/*
+ *  Register offset addresses
+ */
+/* CPU Configuration.  */
+#define GT_CPU_OFS		0x000
+
+#define GT_MULTI_OFS		0x120
+
+/* CPU Address Decode.  */
+#define GT_SCS10LD_OFS		0x008
+#define GT_SCS10HD_OFS		0x010
+#define GT_SCS32LD_OFS		0x018
+#define GT_SCS32HD_OFS		0x020
+#define GT_CS20LD_OFS		0x028
+#define GT_CS20HD_OFS		0x030
+#define GT_CS3BOOTLD_OFS	0x038
+#define GT_CS3BOOTHD_OFS	0x040
+#define GT_PCI0IOLD_OFS		0x048
+#define GT_PCI0IOHD_OFS		0x050
+#define GT_PCI0M0LD_OFS		0x058
+#define GT_PCI0M0HD_OFS		0x060
+#define GT_ISD_OFS		0x068
+
+#define GT_PCI0M1LD_OFS		0x080
+#define GT_PCI0M1HD_OFS		0x088
+#define GT_PCI1IOLD_OFS		0x090
+#define GT_PCI1IOHD_OFS		0x098
+#define GT_PCI1M0LD_OFS		0x0a0
+#define GT_PCI1M0HD_OFS		0x0a8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+
+#define GT_SCS10AR_OFS		0x0d0
+#define GT_SCS32AR_OFS		0x0d8
+#define GT_CS20R_OFS		0x0e0
+#define GT_CS3BOOTR_OFS		0x0e8
+
+#define GT_PCI0IOREMAP_OFS	0x0f0
+#define GT_PCI0M0REMAP_OFS	0x0f8
+#define GT_PCI0M1REMAP_OFS	0x100
+#define GT_PCI1IOREMAP_OFS	0x108
+#define GT_PCI1M0REMAP_OFS	0x110
+#define GT_PCI1M1REMAP_OFS	0x118
+
+/* CPU Error Report.  */
+#define GT_CPUERR_ADDRLO_OFS	0x070
+#define GT_CPUERR_ADDRHI_OFS	0x078
+
+#define GT_CPUERR_DATALO_OFS	0x128			/* GT-64120A only  */
+#define GT_CPUERR_DATAHI_OFS	0x130			/* GT-64120A only  */
+#define GT_CPUERR_PARITY_OFS	0x138			/* GT-64120A only  */
+
+/* CPU Sync Barrier.  */
+#define GT_PCI0SYNC_OFS		0x0c0
+#define GT_PCI1SYNC_OFS		0x0c8
+
+/* SDRAM and Device Address Decode.  */
+#define GT_SCS0LD_OFS		0x400
+#define GT_SCS0HD_OFS		0x404
+#define GT_SCS1LD_OFS		0x408
+#define GT_SCS1HD_OFS		0x40c
+#define GT_SCS2LD_OFS		0x410
+#define GT_SCS2HD_OFS		0x414
+#define GT_SCS3LD_OFS		0x418
+#define GT_SCS3HD_OFS		0x41c
+#define GT_CS0LD_OFS		0x420
+#define GT_CS0HD_OFS		0x424
+#define GT_CS1LD_OFS		0x428
+#define GT_CS1HD_OFS		0x42c
+#define GT_CS2LD_OFS		0x430
+#define GT_CS2HD_OFS		0x434
+#define GT_CS3LD_OFS		0x438
+#define GT_CS3HD_OFS		0x43c
+#define GT_BOOTLD_OFS		0x440
+#define GT_BOOTHD_OFS		0x444
+
+#define GT_ADERR_OFS		0x470
+
+/* SDRAM Configuration.  */
+#define GT_SDRAM_CFG_OFS	0x448
+
+#define GT_SDRAM_OPMODE_OFS	0x474
+#define GT_SDRAM_BM_OFS		0x478
+#define GT_SDRAM_ADDRDECODE_OFS	0x47c
+
+/* SDRAM Parameters.  */
+#define GT_SDRAM_B0_OFS		0x44c
+#define GT_SDRAM_B1_OFS		0x450
+#define GT_SDRAM_B2_OFS		0x454
+#define GT_SDRAM_B3_OFS		0x458
+
+/* Device Parameters.  */
+#define GT_DEV_B0_OFS		0x45c
+#define GT_DEV_B1_OFS		0x460
+#define GT_DEV_B2_OFS		0x464
+#define GT_DEV_B3_OFS		0x468
+#define GT_DEV_BOOT_OFS		0x46c
+
+/* ECC.  */
+#define GT_ECC_ERRDATALO	0x480			/* GT-64120A only  */
+#define GT_ECC_ERRDATAHI	0x484			/* GT-64120A only  */
+#define GT_ECC_MEM		0x488			/* GT-64120A only  */
+#define GT_ECC_CALC		0x48c			/* GT-64120A only  */
+#define GT_ECC_ERRADDR		0x490			/* GT-64120A only  */
+
+/* DMA Record.  */
+#define GT_DMA0_CNT_OFS		0x800
+#define GT_DMA1_CNT_OFS		0x804
+#define GT_DMA2_CNT_OFS		0x808
+#define GT_DMA3_CNT_OFS		0x80c
+#define GT_DMA0_SA_OFS		0x810
+#define GT_DMA1_SA_OFS		0x814
+#define GT_DMA2_SA_OFS		0x818
+#define GT_DMA3_SA_OFS		0x81c
+#define GT_DMA0_DA_OFS		0x820
+#define GT_DMA1_DA_OFS		0x824
+#define GT_DMA2_DA_OFS		0x828
+#define GT_DMA3_DA_OFS		0x82c
+#define GT_DMA0_NEXT_OFS	0x830
+#define GT_DMA1_NEXT_OFS	0x834
+#define GT_DMA2_NEXT_OFS	0x838
+#define GT_DMA3_NEXT_OFS	0x83c
+
+#define GT_DMA0_CUR_OFS		0x870
+#define GT_DMA1_CUR_OFS		0x874
+#define GT_DMA2_CUR_OFS		0x878
+#define GT_DMA3_CUR_OFS		0x87c
+
+/* DMA Channel Control.  */
+#define GT_DMA0_CTRL_OFS	0x840
+#define GT_DMA1_CTRL_OFS	0x844
+#define GT_DMA2_CTRL_OFS	0x848
+#define GT_DMA3_CTRL_OFS	0x84c
+
+/* DMA Arbiter.  */
+#define GT_DMA_ARB_OFS		0x860
+
+/* Timer/Counter.  */
+#define GT_TC0_OFS		0x850
+#define GT_TC1_OFS		0x854
+#define GT_TC2_OFS		0x858
+#define GT_TC3_OFS		0x85c
+
+#define GT_TC_CONTROL_OFS	0x864
+
+/* PCI Internal.  */
+#define GT_PCI0_CMD_OFS		0xc00
+#define GT_PCI0_TOR_OFS		0xc04
+#define GT_PCI0_BS_SCS10_OFS	0xc08
+#define GT_PCI0_BS_SCS32_OFS	0xc0c
+#define GT_PCI0_BS_CS20_OFS	0xc10
+#define GT_PCI0_BS_CS3BT_OFS	0xc14
+
+#define GT_PCI1_IACK_OFS	0xc30
+#define GT_PCI0_IACK_OFS	0xc34
+
+#define GT_PCI0_BARE_OFS	0xc3c
+#define GT_PCI0_PREFMBR_OFS	0xc40
+
+#define GT_PCI0_SCS10_BAR_OFS	0xc48
+#define GT_PCI0_SCS32_BAR_OFS	0xc4c
+#define GT_PCI0_CS20_BAR_OFS	0xc50
+#define GT_PCI0_CS3BT_BAR_OFS	0xc54
+#define GT_PCI0_SSCS10_BAR_OFS	0xc58
+#define GT_PCI0_SSCS32_BAR_OFS	0xc5c
+
+#define GT_PCI0_SCS3BT_BAR_OFS	0xc64
+
+#define GT_PCI1_CMD_OFS		0xc80
+#define GT_PCI1_TOR_OFS		0xc84
+#define GT_PCI1_BS_SCS10_OFS	0xc88
+#define GT_PCI1_BS_SCS32_OFS	0xc8c
+#define GT_PCI1_BS_CS20_OFS	0xc90
+#define GT_PCI1_BS_CS3BT_OFS	0xc94
+
+#define GT_PCI1_BARE_OFS	0xcbc
+#define GT_PCI1_PREFMBR_OFS	0xcc0
+
+#define GT_PCI1_SCS10_BAR_OFS	0xcc8
+#define GT_PCI1_SCS32_BAR_OFS	0xccc
+#define GT_PCI1_CS20_BAR_OFS	0xcd0
+#define GT_PCI1_CS3BT_BAR_OFS	0xcd4
+#define GT_PCI1_SSCS10_BAR_OFS	0xcd8
+#define GT_PCI1_SSCS32_BAR_OFS	0xcdc
+
+#define GT_PCI1_SCS3BT_BAR_OFS	0xce4
+
+#define GT_PCI1_CFGADDR_OFS	0xcf0
+#define GT_PCI1_CFGDATA_OFS	0xcf4
+#define GT_PCI0_CFGADDR_OFS	0xcf8
+#define GT_PCI0_CFGDATA_OFS	0xcfc
+
+/* Interrupts.  */
+#define GT_INTRCAUSE_OFS	0xc18
+#define GT_INTRMASK_OFS		0xc1c
+
+#define GT_PCI0_ICMASK_OFS	0xc24
+#define GT_PCI0_SERR0MASK_OFS	0xc28
+
+#define GT_CPU_INTSEL_OFS	0xc70
+#define GT_PCI0_INTSEL_OFS	0xc74
+
+#define GT_HINTRCAUSE_OFS	0xc98
+#define GT_HINTRMASK_OFS	0xc9c
+
+#define GT_PCI0_HICMASK_OFS	0xca4
+#define GT_PCI1_SERR1MASK_OFS	0xca8
+
+
+/*
+ * I2O Support Registers
+ */
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x01c
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE		0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE		0x02c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE			0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE		0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x06c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x07c
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c1c
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c2c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE			0x1c50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE		0x1c54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c6c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c7c
+
+/*
+ *  Register encodings
+ */
+#define GT_CPU_ENDIAN_SHF	12
+#define GT_CPU_ENDIAN_MSK	(MSK(1) << GT_CPU_ENDIAN_SHF)
+#define GT_CPU_ENDIAN_BIT	GT_CPU_ENDIAN_MSK
+#define GT_CPU_WR_SHF		16
+#define GT_CPU_WR_MSK		(MSK(1) << GT_CPU_WR_SHF)
+#define GT_CPU_WR_BIT		GT_CPU_WR_MSK
+#define GT_CPU_WR_DXDXDXDX	0
+#define GT_CPU_WR_DDDD		1
+
+
+#define GT_PCI_DCRM_SHF		21
+#define GT_PCI_LD_SHF		0
+#define GT_PCI_LD_MSK		(MSK(15) << GT_PCI_LD_SHF)
+#define GT_PCI_HD_SHF		0
+#define GT_PCI_HD_MSK		(MSK(7) << GT_PCI_HD_SHF)
+#define GT_PCI_REMAP_SHF	0
+#define GT_PCI_REMAP_MSK	(MSK(11) << GT_PCI_REMAP_SHF)
+
+
+#define GT_CFGADDR_CFGEN_SHF	31
+#define GT_CFGADDR_CFGEN_MSK	(MSK(1) << GT_CFGADDR_CFGEN_SHF)
+#define GT_CFGADDR_CFGEN_BIT	GT_CFGADDR_CFGEN_MSK
+
+#define GT_CFGADDR_BUSNUM_SHF	16
+#define GT_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_CFGADDR_BUSNUM_SHF)
+
+#define GT_CFGADDR_DEVNUM_SHF	11
+#define GT_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_CFGADDR_DEVNUM_SHF)
+
+#define GT_CFGADDR_FUNCNUM_SHF	8
+#define GT_CFGADDR_FUNCNUM_MSK	(MSK(3) << GT_CFGADDR_FUNCNUM_SHF)
+
+#define GT_CFGADDR_REGNUM_SHF	2
+#define GT_CFGADDR_REGNUM_MSK	(MSK(6) << GT_CFGADDR_REGNUM_SHF)
+
+
+#define GT_SDRAM_BM_ORDER_SHF	2
+#define GT_SDRAM_BM_ORDER_MSK	(MSK(1) << GT_SDRAM_BM_ORDER_SHF)
+#define GT_SDRAM_BM_ORDER_BIT	GT_SDRAM_BM_ORDER_MSK
+#define GT_SDRAM_BM_ORDER_SUB	1
+#define GT_SDRAM_BM_ORDER_LIN	0
+
+#define GT_SDRAM_BM_RSVD_ALL1	0xffb
+
+
+#define GT_SDRAM_ADDRDECODE_ADDR_SHF	0
+#define GT_SDRAM_ADDRDECODE_ADDR_MSK	(MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF)
+#define GT_SDRAM_ADDRDECODE_ADDR_0	0
+#define GT_SDRAM_ADDRDECODE_ADDR_1	1
+#define GT_SDRAM_ADDRDECODE_ADDR_2	2
+#define GT_SDRAM_ADDRDECODE_ADDR_3	3
+#define GT_SDRAM_ADDRDECODE_ADDR_4	4
+#define GT_SDRAM_ADDRDECODE_ADDR_5	5
+#define GT_SDRAM_ADDRDECODE_ADDR_6	6
+#define GT_SDRAM_ADDRDECODE_ADDR_7	7
+
+
+#define GT_SDRAM_B0_CASLAT_SHF		0
+#define GT_SDRAM_B0_CASLAT_MSK		(MSK(2) << GT_SDRAM_B0__SHF)
+#define GT_SDRAM_B0_CASLAT_2		1
+#define GT_SDRAM_B0_CASLAT_3		2
+
+#define GT_SDRAM_B0_FTDIS_SHF		2
+#define GT_SDRAM_B0_FTDIS_MSK		(MSK(1) << GT_SDRAM_B0_FTDIS_SHF)
+#define GT_SDRAM_B0_FTDIS_BIT		GT_SDRAM_B0_FTDIS_MSK
+
+#define GT_SDRAM_B0_SRASPRCHG_SHF	3
+#define GT_SDRAM_B0_SRASPRCHG_MSK	(MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF)
+#define GT_SDRAM_B0_SRASPRCHG_BIT	GT_SDRAM_B0_SRASPRCHG_MSK
+#define GT_SDRAM_B0_SRASPRCHG_2		0
+#define GT_SDRAM_B0_SRASPRCHG_3		1
+
+#define GT_SDRAM_B0_B0COMPAB_SHF	4
+#define GT_SDRAM_B0_B0COMPAB_MSK	(MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF)
+#define GT_SDRAM_B0_B0COMPAB_BIT	GT_SDRAM_B0_B0COMPAB_MSK
+
+#define GT_SDRAM_B0_64BITINT_SHF	5
+#define GT_SDRAM_B0_64BITINT_MSK	(MSK(1) << GT_SDRAM_B0_64BITINT_SHF)
+#define GT_SDRAM_B0_64BITINT_BIT	GT_SDRAM_B0_64BITINT_MSK
+#define GT_SDRAM_B0_64BITINT_2		0
+#define GT_SDRAM_B0_64BITINT_4		1
+
+#define GT_SDRAM_B0_BW_SHF		6
+#define GT_SDRAM_B0_BW_MSK		(MSK(1) << GT_SDRAM_B0_BW_SHF)
+#define GT_SDRAM_B0_BW_BIT		GT_SDRAM_B0_BW_MSK
+#define GT_SDRAM_B0_BW_32		0
+#define GT_SDRAM_B0_BW_64		1
+
+#define GT_SDRAM_B0_BLODD_SHF		7
+#define GT_SDRAM_B0_BLODD_MSK		(MSK(1) << GT_SDRAM_B0_BLODD_SHF)
+#define GT_SDRAM_B0_BLODD_BIT		GT_SDRAM_B0_BLODD_MSK
+
+#define GT_SDRAM_B0_PAR_SHF		8
+#define GT_SDRAM_B0_PAR_MSK		(MSK(1) << GT_SDRAM_B0_PAR_SHF)
+#define GT_SDRAM_B0_PAR_BIT		GT_SDRAM_B0_PAR_MSK
+
+#define GT_SDRAM_B0_BYPASS_SHF		9
+#define GT_SDRAM_B0_BYPASS_MSK		(MSK(1) << GT_SDRAM_B0_BYPASS_SHF)
+#define GT_SDRAM_B0_BYPASS_BIT		GT_SDRAM_B0_BYPASS_MSK
+
+#define GT_SDRAM_B0_SRAS2SCAS_SHF	10
+#define GT_SDRAM_B0_SRAS2SCAS_MSK	(MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF)
+#define GT_SDRAM_B0_SRAS2SCAS_BIT	GT_SDRAM_B0_SRAS2SCAS_MSK
+#define GT_SDRAM_B0_SRAS2SCAS_2		0
+#define GT_SDRAM_B0_SRAS2SCAS_3		1
+
+#define GT_SDRAM_B0_SIZE_SHF		11
+#define GT_SDRAM_B0_SIZE_MSK		(MSK(1) << GT_SDRAM_B0_SIZE_SHF)
+#define GT_SDRAM_B0_SIZE_BIT		GT_SDRAM_B0_SIZE_MSK
+#define GT_SDRAM_B0_SIZE_16M		0
+#define GT_SDRAM_B0_SIZE_64M		1
+
+#define GT_SDRAM_B0_EXTPAR_SHF		12
+#define GT_SDRAM_B0_EXTPAR_MSK		(MSK(1) << GT_SDRAM_B0_EXTPAR_SHF)
+#define GT_SDRAM_B0_EXTPAR_BIT		GT_SDRAM_B0_EXTPAR_MSK
+
+#define GT_SDRAM_B0_BLEN_SHF		13
+#define GT_SDRAM_B0_BLEN_MSK		(MSK(1) << GT_SDRAM_B0_BLEN_SHF)
+#define GT_SDRAM_B0_BLEN_BIT		GT_SDRAM_B0_BLEN_MSK
+#define GT_SDRAM_B0_BLEN_8		0
+#define GT_SDRAM_B0_BLEN_4		1
+
+
+#define GT_SDRAM_CFG_REFINT_SHF		0
+#define GT_SDRAM_CFG_REFINT_MSK		(MSK(14) << GT_SDRAM_CFG_REFINT_SHF)
+
+#define GT_SDRAM_CFG_NINTERLEAVE_SHF	14
+#define GT_SDRAM_CFG_NINTERLEAVE_MSK	(MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF)
+#define GT_SDRAM_CFG_NINTERLEAVE_BIT	GT_SDRAM_CFG_NINTERLEAVE_MSK
+
+#define GT_SDRAM_CFG_RMW_SHF		15
+#define GT_SDRAM_CFG_RMW_MSK		(MSK(1) << GT_SDRAM_CFG_RMW_SHF)
+#define GT_SDRAM_CFG_RMW_BIT		GT_SDRAM_CFG_RMW_MSK
+
+#define GT_SDRAM_CFG_NONSTAGREF_SHF	16
+#define GT_SDRAM_CFG_NONSTAGREF_MSK	(MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF)
+#define GT_SDRAM_CFG_NONSTAGREF_BIT	GT_SDRAM_CFG_NONSTAGREF_MSK
+
+#define GT_SDRAM_CFG_DUPCNTL_SHF	19
+#define GT_SDRAM_CFG_DUPCNTL_MSK	(MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF)
+#define GT_SDRAM_CFG_DUPCNTL_BIT	GT_SDRAM_CFG_DUPCNTL_MSK
+
+#define GT_SDRAM_CFG_DUPBA_SHF		20
+#define GT_SDRAM_CFG_DUPBA_MSK		(MSK(1) << GT_SDRAM_CFG_DUPBA_SHF)
+#define GT_SDRAM_CFG_DUPBA_BIT		GT_SDRAM_CFG_DUPBA_MSK
+
+#define GT_SDRAM_CFG_DUPEOT0_SHF	21
+#define GT_SDRAM_CFG_DUPEOT0_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF)
+#define GT_SDRAM_CFG_DUPEOT0_BIT	GT_SDRAM_CFG_DUPEOT0_MSK
+
+#define GT_SDRAM_CFG_DUPEOT1_SHF	22
+#define GT_SDRAM_CFG_DUPEOT1_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF)
+#define GT_SDRAM_CFG_DUPEOT1_BIT	GT_SDRAM_CFG_DUPEOT1_MSK
+
+#define GT_SDRAM_OPMODE_OP_SHF		0
+#define GT_SDRAM_OPMODE_OP_MSK		(MSK(3) << GT_SDRAM_OPMODE_OP_SHF)
+#define GT_SDRAM_OPMODE_OP_NORMAL	0
+#define GT_SDRAM_OPMODE_OP_NOP		1
+#define GT_SDRAM_OPMODE_OP_PRCHG	2
+#define GT_SDRAM_OPMODE_OP_MODE		3
+#define GT_SDRAM_OPMODE_OP_CBR		4
+
+
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF	0
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT	GT_PCI0_BARE_SWSCS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_SWSCS32DIS_SHF	1
+#define GT_PCI0_BARE_SWSCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF)
+#define GT_PCI0_BARE_SWSCS32DIS_BIT	GT_PCI0_BARE_SWSCS32DIS_MSK
+
+#define GT_PCI0_BARE_SWSCS10DIS_SHF	2
+#define GT_PCI0_BARE_SWSCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF)
+#define GT_PCI0_BARE_SWSCS10DIS_BIT	GT_PCI0_BARE_SWSCS10DIS_MSK
+
+#define GT_PCI0_BARE_INTIODIS_SHF	3
+#define GT_PCI0_BARE_INTIODIS_MSK	(MSK(1) << GT_PCI0_BARE_INTIODIS_SHF)
+#define GT_PCI0_BARE_INTIODIS_BIT	GT_PCI0_BARE_INTIODIS_MSK
+
+#define GT_PCI0_BARE_INTMEMDIS_SHF	4
+#define GT_PCI0_BARE_INTMEMDIS_MSK	(MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF)
+#define GT_PCI0_BARE_INTMEMDIS_BIT	GT_PCI0_BARE_INTMEMDIS_MSK
+
+#define GT_PCI0_BARE_CS3BOOTDIS_SHF	5
+#define GT_PCI0_BARE_CS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_CS3BOOTDIS_BIT	GT_PCI0_BARE_CS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_CS20DIS_SHF	6
+#define GT_PCI0_BARE_CS20DIS_MSK	(MSK(1) << GT_PCI0_BARE_CS20DIS_SHF)
+#define GT_PCI0_BARE_CS20DIS_BIT	GT_PCI0_BARE_CS20DIS_MSK
+
+#define GT_PCI0_BARE_SCS32DIS_SHF	7
+#define GT_PCI0_BARE_SCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF)
+#define GT_PCI0_BARE_SCS32DIS_BIT	GT_PCI0_BARE_SCS32DIS_MSK
+
+#define GT_PCI0_BARE_SCS10DIS_SHF	8
+#define GT_PCI0_BARE_SCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF)
+#define GT_PCI0_BARE_SCS10DIS_BIT	GT_PCI0_BARE_SCS10DIS_MSK
+
+
+#define GT_INTRCAUSE_MASABORT0_SHF	18
+#define GT_INTRCAUSE_MASABORT0_MSK	(MSK(1) << GT_INTRCAUSE_MASABORT0_SHF)
+#define GT_INTRCAUSE_MASABORT0_BIT	GT_INTRCAUSE_MASABORT0_MSK
+
+#define GT_INTRCAUSE_TARABORT0_SHF	19
+#define GT_INTRCAUSE_TARABORT0_MSK	(MSK(1) << GT_INTRCAUSE_TARABORT0_SHF)
+#define GT_INTRCAUSE_TARABORT0_BIT	GT_INTRCAUSE_TARABORT0_MSK
+
+
+#define GT_PCI0_CFGADDR_REGNUM_SHF	2
+#define GT_PCI0_CFGADDR_REGNUM_MSK	(MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
+#define GT_PCI0_CFGADDR_FUNCTNUM_SHF	8
+#define GT_PCI0_CFGADDR_FUNCTNUM_MSK	(MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
+#define GT_PCI0_CFGADDR_DEVNUM_SHF	11
+#define GT_PCI0_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
+#define GT_PCI0_CFGADDR_BUSNUM_SHF	16
+#define GT_PCI0_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_SHF	31
+#define GT_PCI0_CFGADDR_CONFIGEN_MSK	(MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_BIT	GT_PCI0_CFGADDR_CONFIGEN_MSK
+
+#define GT_PCI0_CMD_MBYTESWAP_SHF	0
+#define GT_PCI0_CMD_MBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF)
+#define GT_PCI0_CMD_MBYTESWAP_BIT	GT_PCI0_CMD_MBYTESWAP_MSK
+#define GT_PCI0_CMD_MWORDSWAP_SHF	10
+#define GT_PCI0_CMD_MWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF)
+#define GT_PCI0_CMD_MWORDSWAP_BIT	GT_PCI0_CMD_MWORDSWAP_MSK
+#define GT_PCI0_CMD_SBYTESWAP_SHF	16
+#define GT_PCI0_CMD_SBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF)
+#define GT_PCI0_CMD_SBYTESWAP_BIT	GT_PCI0_CMD_SBYTESWAP_MSK
+#define GT_PCI0_CMD_SWORDSWAP_SHF	11
+#define GT_PCI0_CMD_SWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF)
+#define GT_PCI0_CMD_SWORDSWAP_BIT	GT_PCI0_CMD_SWORDSWAP_MSK
+
+/*
+ *  Misc
+ */
+#define GT_DEF_PCI0_IO_BASE	0x10000000UL
+#define GT_DEF_PCI0_IO_SIZE	0x02000000UL
+#define GT_DEF_PCI0_MEM0_BASE	0x12000000UL
+#define GT_DEF_PCI0_MEM0_SIZE	0x02000000UL
+#define GT_DEF_BASE		0x14000000UL
+
+#define GT_MAX_BANKSIZE		(256 * 1024 * 1024)	/* Max 256MB bank  */
+#define GT_LATTIM_MIN		6			/* Minimum lat  */
+
+/*
+ * The gt64120_dep.h file must define the following macros
+ *
+ *   GT_READ(ofs, data_pointer)
+ *   GT_WRITE(ofs, data)           - read/write GT64120 registers in 32bit
+ *
+ *   TIMER 	- gt64120 timer irq, temporary solution until
+ *		  full gt64120 cascade interrupt support is in place
+ */
+
+#include <mach-gt64120.h>
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.  We also provide non-swapping versions.
+ */
+#define __GT_READ(ofs)							\
+	(*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs)		le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data)	__GT_WRITE(ofs, cpu_to_le32(data))
+
+#endif /* _ASM_GT64120_H */
diff --git a/include/asm-mips/gt64240.h b/include/asm-mips/gt64240.h
new file mode 100644
index 000000000000..8f9bd341ed49
--- /dev/null
+++ b/include/asm-mips/gt64240.h
@@ -0,0 +1,1235 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright - Galileo technology.
+ * Copyright (C) 2004 by Ralf Baechle
+ */
+#ifndef __ASM_MIPS_MV64240_H
+#define __ASM_MIPS_MV64240_H
+
+#include <asm/addrspace.h>
+#include <asm/marvell.h>
+
+/*
+ * CPU Control Registers
+ */
+
+#define CPU_CONFIGURATION					0x000
+#define CPU_MODE						0x120
+#define CPU_READ_RESPONSE_CROSSBAR_LOW				0x170
+#define CPU_READ_RESPONSE_CROSSBAR_HIGH				0x178
+
+/*
+ * Processor Address Space
+ */
+
+/* Sdram's BAR'S */
+#define SCS_0_LOW_DECODE_ADDRESS				0x008
+#define SCS_0_HIGH_DECODE_ADDRESS				0x010
+#define SCS_1_LOW_DECODE_ADDRESS				0x208
+#define SCS_1_HIGH_DECODE_ADDRESS				0x210
+#define SCS_2_LOW_DECODE_ADDRESS				0x018
+#define SCS_2_HIGH_DECODE_ADDRESS				0x020
+#define SCS_3_LOW_DECODE_ADDRESS				0x218
+#define SCS_3_HIGH_DECODE_ADDRESS				0x220
+/* Devices BAR'S */
+#define CS_0_LOW_DECODE_ADDRESS					0x028
+#define CS_0_HIGH_DECODE_ADDRESS				0x030
+#define CS_1_LOW_DECODE_ADDRESS					0x228
+#define CS_1_HIGH_DECODE_ADDRESS				0x230
+#define CS_2_LOW_DECODE_ADDRESS					0x248
+#define CS_2_HIGH_DECODE_ADDRESS				0x250
+#define CS_3_LOW_DECODE_ADDRESS					0x038
+#define CS_3_HIGH_DECODE_ADDRESS				0x040
+#define BOOTCS_LOW_DECODE_ADDRESS				0x238
+#define BOOTCS_HIGH_DECODE_ADDRESS				0x240
+
+#define PCI_0I_O_LOW_DECODE_ADDRESS				0x048
+#define PCI_0I_O_HIGH_DECODE_ADDRESS				0x050
+#define PCI_0MEMORY0_LOW_DECODE_ADDRESS				0x058
+#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS			0x060
+#define PCI_0MEMORY1_LOW_DECODE_ADDRESS				0x080
+#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS			0x088
+#define PCI_0MEMORY2_LOW_DECODE_ADDRESS				0x258
+#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS			0x260
+#define PCI_0MEMORY3_LOW_DECODE_ADDRESS				0x280
+#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS			0x288
+
+#define PCI_1I_O_LOW_DECODE_ADDRESS				0x090
+#define PCI_1I_O_HIGH_DECODE_ADDRESS				0x098
+#define PCI_1MEMORY0_LOW_DECODE_ADDRESS				0x0a0
+#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS			0x0a8
+#define PCI_1MEMORY1_LOW_DECODE_ADDRESS				0x0b0
+#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS			0x0b8
+#define PCI_1MEMORY2_LOW_DECODE_ADDRESS				0x2a0
+#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS			0x2a8
+#define PCI_1MEMORY3_LOW_DECODE_ADDRESS				0x2b0
+#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS			0x2b8
+
+#define INTERNAL_SPACE_DECODE					0x068
+
+#define CPU_0_LOW_DECODE_ADDRESS				0x290
+#define CPU_0_HIGH_DECODE_ADDRESS				0x298
+#define CPU_1_LOW_DECODE_ADDRESS				0x2c0
+#define CPU_1_HIGH_DECODE_ADDRESS				0x2c8
+
+#define PCI_0I_O_ADDRESS_REMAP					0x0f0
+#define PCI_0MEMORY0_ADDRESS_REMAP				0x0f8
+#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP				0x320
+#define PCI_0MEMORY1_ADDRESS_REMAP				0x100
+#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP				0x328
+#define PCI_0MEMORY2_ADDRESS_REMAP				0x2f8
+#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP				0x330
+#define PCI_0MEMORY3_ADDRESS_REMAP				0x300
+#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP				0x338
+
+#define PCI_1I_O_ADDRESS_REMAP					0x108
+#define PCI_1MEMORY0_ADDRESS_REMAP				0x110
+#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP				0x340
+#define PCI_1MEMORY1_ADDRESS_REMAP				0x118
+#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP				0x348
+#define PCI_1MEMORY2_ADDRESS_REMAP				0x310
+#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP				0x350
+#define PCI_1MEMORY3_ADDRESS_REMAP				0x318
+#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP				0x358
+
+/*
+ * CPU Sync Barrier
+ */
+
+#define PCI_0SYNC_BARIER_VIRTUAL_REGISTER			0x0c0
+#define PCI_1SYNC_BARIER_VIRTUAL_REGISTER			0x0c8
+
+
+/*
+ * CPU Access Protect
+ */
+
+#define CPU_LOW_PROTECT_ADDRESS_0				0X180
+#define CPU_HIGH_PROTECT_ADDRESS_0				0X188
+#define CPU_LOW_PROTECT_ADDRESS_1				0X190
+#define CPU_HIGH_PROTECT_ADDRESS_1				0X198
+#define CPU_LOW_PROTECT_ADDRESS_2				0X1a0
+#define CPU_HIGH_PROTECT_ADDRESS_2				0X1a8
+#define CPU_LOW_PROTECT_ADDRESS_3				0X1b0
+#define CPU_HIGH_PROTECT_ADDRESS_3				0X1b8
+#define CPU_LOW_PROTECT_ADDRESS_4				0X1c0
+#define CPU_HIGH_PROTECT_ADDRESS_4				0X1c8
+#define CPU_LOW_PROTECT_ADDRESS_5				0X1d0
+#define CPU_HIGH_PROTECT_ADDRESS_5				0X1d8
+#define CPU_LOW_PROTECT_ADDRESS_6				0X1e0
+#define CPU_HIGH_PROTECT_ADDRESS_6				0X1e8
+#define CPU_LOW_PROTECT_ADDRESS_7				0X1f0
+#define CPU_HIGH_PROTECT_ADDRESS_7				0X1f8
+
+
+/*
+ * Snoop Control
+ */
+
+#define SNOOP_BASE_ADDRESS_0					0x380
+#define SNOOP_TOP_ADDRESS_0					0x388
+#define SNOOP_BASE_ADDRESS_1					0x390
+#define SNOOP_TOP_ADDRESS_1					0x398
+#define SNOOP_BASE_ADDRESS_2					0x3a0
+#define SNOOP_TOP_ADDRESS_2					0x3a8
+#define SNOOP_BASE_ADDRESS_3					0x3b0
+#define SNOOP_TOP_ADDRESS_3					0x3b8
+
+/*
+ * CPU Error Report
+ */
+
+#define CPU_ERROR_ADDRESS_LOW					0x070
+#define CPU_ERROR_ADDRESS_HIGH					0x078
+#define CPU_ERROR_DATA_LOW					0x128
+#define CPU_ERROR_DATA_HIGH					0x130
+#define CPU_ERROR_PARITY					0x138
+#define CPU_ERROR_CAUSE						0x140
+#define CPU_ERROR_MASK						0x148
+
+/*
+ * Pslave Debug
+ */
+
+#define X_0_ADDRESS						0x360
+#define X_0_COMMAND_ID						0x368
+#define X_1_ADDRESS						0x370
+#define X_1_COMMAND_ID						0x378
+#define WRITE_DATA_LOW						0x3c0
+#define WRITE_DATA_HIGH						0x3c8
+#define WRITE_BYTE_ENABLE					0X3e0
+#define READ_DATA_LOW						0x3d0
+#define READ_DATA_HIGH						0x3d8
+#define READ_ID							0x3e8
+
+
+/*
+ * SDRAM and Device Address Space
+ */
+
+
+/*
+ * SDRAM Configuration
+ */
+
+#define SDRAM_CONFIGURATION					0x448
+#define SDRAM_OPERATION_MODE					0x474
+#define SDRAM_ADDRESS_DECODE					0x47C
+#define SDRAM_TIMING_PARAMETERS					0x4b4
+#define SDRAM_UMA_CONTROL					0x4a4
+#define SDRAM_CROSS_BAR_CONTROL_LOW				0x4a8
+#define SDRAM_CROSS_BAR_CONTROL_HIGH				0x4ac
+#define SDRAM_CROSS_BAR_TIMEOUT					0x4b0
+
+
+/*
+ * SDRAM Parameters
+ */
+
+#define SDRAM_BANK0PARAMETERS					0x44C
+#define SDRAM_BANK1PARAMETERS					0x450
+#define SDRAM_BANK2PARAMETERS					0x454
+#define SDRAM_BANK3PARAMETERS					0x458
+
+
+/*
+ * SDRAM Error Report
+ */
+
+#define SDRAM_ERROR_DATA_LOW					0x484
+#define SDRAM_ERROR_DATA_HIGH					0x480
+#define SDRAM_AND_DEVICE_ERROR_ADDRESS				0x490
+#define SDRAM_RECEIVED_ECC					0x488
+#define SDRAM_CALCULATED_ECC					0x48c
+#define SDRAM_ECC_CONTROL					0x494
+#define SDRAM_ECC_ERROR_COUNTER					0x498
+
+
+/*
+ * SDunit Debug (for internal use)
+ */
+
+#define X0_ADDRESS						0x500
+#define X0_COMMAND_AND_ID					0x504
+#define X0_WRITE_DATA_LOW					0x508
+#define X0_WRITE_DATA_HIGH					0x50c
+#define X0_WRITE_BYTE_ENABLE					0x518
+#define X0_READ_DATA_LOW					0x510
+#define X0_READ_DATA_HIGH					0x514
+#define X0_READ_ID						0x51c
+#define X1_ADDRESS						0x520
+#define X1_COMMAND_AND_ID					0x524
+#define X1_WRITE_DATA_LOW					0x528
+#define X1_WRITE_DATA_HIGH					0x52c
+#define X1_WRITE_BYTE_ENABLE					0x538
+#define X1_READ_DATA_LOW					0x530
+#define X1_READ_DATA_HIGH					0x534
+#define X1_READ_ID						0x53c
+#define X0_SNOOP_ADDRESS					0x540
+#define X0_SNOOP_COMMAND					0x544
+#define X1_SNOOP_ADDRESS					0x548
+#define X1_SNOOP_COMMAND					0x54c
+
+
+/*
+ * Device Parameters
+ */
+
+#define DEVICE_BANK0PARAMETERS					0x45c
+#define DEVICE_BANK1PARAMETERS					0x460
+#define DEVICE_BANK2PARAMETERS					0x464
+#define DEVICE_BANK3PARAMETERS					0x468
+#define DEVICE_BOOT_BANK_PARAMETERS				0x46c
+#define DEVICE_CONTROL						0x4c0
+#define DEVICE_CROSS_BAR_CONTROL_LOW				0x4c8
+#define DEVICE_CROSS_BAR_CONTROL_HIGH				0x4cc
+#define DEVICE_CROSS_BAR_TIMEOUT				0x4c4
+
+
+/*
+ * Device Interrupt
+ */
+
+#define DEVICE_INTERRUPT_CAUSE					0x4d0
+#define DEVICE_INTERRUPT_MASK					0x4d4
+#define DEVICE_ERROR_ADDRESS					0x4d8
+
+/*
+ * DMA Record
+ */
+
+#define CHANNEL0_DMA_BYTE_COUNT					0x800
+#define CHANNEL1_DMA_BYTE_COUNT					0x804
+#define CHANNEL2_DMA_BYTE_COUNT					0x808
+#define CHANNEL3_DMA_BYTE_COUNT					0x80C
+#define CHANNEL4_DMA_BYTE_COUNT					0x900
+#define CHANNEL5_DMA_BYTE_COUNT					0x904
+#define CHANNEL6_DMA_BYTE_COUNT					0x908
+#define CHANNEL7_DMA_BYTE_COUNT					0x90C
+#define CHANNEL0_DMA_SOURCE_ADDRESS				0x810
+#define CHANNEL1_DMA_SOURCE_ADDRESS				0x814
+#define CHANNEL2_DMA_SOURCE_ADDRESS				0x818
+#define CHANNEL3_DMA_SOURCE_ADDRESS				0x81C
+#define CHANNEL4_DMA_SOURCE_ADDRESS				0x910
+#define CHANNEL5_DMA_SOURCE_ADDRESS				0x914
+#define CHANNEL6_DMA_SOURCE_ADDRESS				0x918
+#define CHANNEL7_DMA_SOURCE_ADDRESS				0x91C
+#define CHANNEL0_DMA_DESTINATION_ADDRESS			0x820
+#define CHANNEL1_DMA_DESTINATION_ADDRESS			0x824
+#define CHANNEL2_DMA_DESTINATION_ADDRESS			0x828
+#define CHANNEL3_DMA_DESTINATION_ADDRESS			0x82C
+#define CHANNEL4_DMA_DESTINATION_ADDRESS			0x920
+#define CHANNEL5_DMA_DESTINATION_ADDRESS			0x924
+#define CHANNEL6_DMA_DESTINATION_ADDRESS			0x928
+#define CHANNEL7_DMA_DESTINATION_ADDRESS			0x92C
+#define CHANNEL0NEXT_RECORD_POINTER				0x830
+#define CHANNEL1NEXT_RECORD_POINTER				0x834
+#define CHANNEL2NEXT_RECORD_POINTER				0x838
+#define CHANNEL3NEXT_RECORD_POINTER				0x83C
+#define CHANNEL4NEXT_RECORD_POINTER				0x930
+#define CHANNEL5NEXT_RECORD_POINTER				0x934
+#define CHANNEL6NEXT_RECORD_POINTER				0x938
+#define CHANNEL7NEXT_RECORD_POINTER				0x93C
+#define CHANNEL0CURRENT_DESCRIPTOR_POINTER			0x870
+#define CHANNEL1CURRENT_DESCRIPTOR_POINTER			0x874
+#define CHANNEL2CURRENT_DESCRIPTOR_POINTER			0x878
+#define CHANNEL3CURRENT_DESCRIPTOR_POINTER			0x87C
+#define CHANNEL4CURRENT_DESCRIPTOR_POINTER			0x970
+#define CHANNEL5CURRENT_DESCRIPTOR_POINTER			0x974
+#define CHANNEL6CURRENT_DESCRIPTOR_POINTER			0x978
+#define CHANNEL7CURRENT_DESCRIPTOR_POINTER			0x97C
+#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS			0x890
+#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS			0x894
+#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS			0x898
+#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS			0x89c
+#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS			0x990
+#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS			0x994
+#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS			0x998
+#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS			0x99c
+#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x8a0
+#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x8a4
+#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x8a8
+#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x8ac
+#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x9a0
+#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x9a4
+#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x9a8
+#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS		0x9ac
+#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x8b0
+#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x8b4
+#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x8b8
+#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x8bc
+#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x9b0
+#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x9b4
+#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x9b8
+#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS	0x9bc
+
+/*
+ * DMA Channel Control
+ */
+
+#define CHANNEL0CONTROL						0x840
+#define CHANNEL0CONTROL_HIGH					0x880
+
+#define CHANNEL1CONTROL						0x844
+#define CHANNEL1CONTROL_HIGH					0x884
+
+#define CHANNEL2CONTROL						0x848
+#define CHANNEL2CONTROL_HIGH					0x888
+
+#define CHANNEL3CONTROL						0x84C
+#define CHANNEL3CONTROL_HIGH					0x88C
+
+#define CHANNEL4CONTROL						0x940
+#define CHANNEL4CONTROL_HIGH					0x980
+
+#define CHANNEL5CONTROL						0x944
+#define CHANNEL5CONTROL_HIGH					0x984
+
+#define CHANNEL6CONTROL						0x948
+#define CHANNEL6CONTROL_HIGH					0x988
+
+#define CHANNEL7CONTROL						0x94C
+#define CHANNEL7CONTROL_HIGH					0x98C
+
+
+/*
+ * DMA Arbiter
+ */
+
+#define ARBITER_CONTROL_0_3					0x860
+#define ARBITER_CONTROL_4_7					0x960
+
+
+/*
+ * DMA Interrupt
+ */
+
+#define CHANELS0_3_INTERRUPT_CAUSE				0x8c0
+#define CHANELS0_3_INTERRUPT_MASK				0x8c4
+#define CHANELS0_3_ERROR_ADDRESS				0x8c8
+#define CHANELS0_3_ERROR_SELECT					0x8cc
+#define CHANELS4_7_INTERRUPT_CAUSE				0x9c0
+#define CHANELS4_7_INTERRUPT_MASK				0x9c4
+#define CHANELS4_7_ERROR_ADDRESS				0x9c8
+#define CHANELS4_7_ERROR_SELECT					0x9cc
+
+
+/*
+ * DMA Debug (for internal use)
+ */
+
+#define DMA_X0_ADDRESS						0x8e0
+#define DMA_X0_COMMAND_AND_ID					0x8e4
+#define DMA_X0_WRITE_DATA_LOW					0x8e8
+#define DMA_X0_WRITE_DATA_HIGH					0x8ec
+#define DMA_X0_WRITE_BYTE_ENABLE				0x8f8
+#define DMA_X0_READ_DATA_LOW					0x8f0
+#define DMA_X0_READ_DATA_HIGH					0x8f4
+#define DMA_X0_READ_ID						0x8fc
+#define DMA_X1_ADDRESS						0x9e0
+#define DMA_X1_COMMAND_AND_ID					0x9e4
+#define DMA_X1_WRITE_DATA_LOW					0x9e8
+#define DMA_X1_WRITE_DATA_HIGH					0x9ec
+#define DMA_X1_WRITE_BYTE_ENABLE				0x9f8
+#define DMA_X1_READ_DATA_LOW					0x9f0
+#define DMA_X1_READ_DATA_HIGH					0x9f4
+#define DMA_X1_READ_ID						0x9fc
+
+/*
+ * Timer_Counter
+ */
+
+#define TIMER_COUNTER0						0x850
+#define TIMER_COUNTER1						0x854
+#define TIMER_COUNTER2						0x858
+#define TIMER_COUNTER3						0x85C
+#define TIMER_COUNTER_0_3_CONTROL				0x864
+#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE			0x868
+#define TIMER_COUNTER_0_3_INTERRUPT_MASK			0x86c
+#define TIMER_COUNTER4						0x950
+#define TIMER_COUNTER5						0x954
+#define TIMER_COUNTER6						0x958
+#define TIMER_COUNTER7						0x95C
+#define TIMER_COUNTER_4_7_CONTROL				0x964
+#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE			0x968
+#define TIMER_COUNTER_4_7_INTERRUPT_MASK			0x96c
+
+/*
+ * PCI Slave Address Decoding
+ */
+
+#define PCI_0SCS_0_BANK_SIZE					0xc08
+#define PCI_1SCS_0_BANK_SIZE					0xc88
+#define PCI_0SCS_1_BANK_SIZE					0xd08
+#define PCI_1SCS_1_BANK_SIZE					0xd88
+#define PCI_0SCS_2_BANK_SIZE					0xc0c
+#define PCI_1SCS_2_BANK_SIZE					0xc8c
+#define PCI_0SCS_3_BANK_SIZE					0xd0c
+#define PCI_1SCS_3_BANK_SIZE					0xd8c
+#define PCI_0CS_0_BANK_SIZE					0xc10
+#define PCI_1CS_0_BANK_SIZE					0xc90
+#define PCI_0CS_1_BANK_SIZE					0xd10
+#define PCI_1CS_1_BANK_SIZE					0xd90
+#define PCI_0CS_2_BANK_SIZE					0xd18
+#define PCI_1CS_2_BANK_SIZE					0xd98
+#define PCI_0CS_3_BANK_SIZE					0xc14
+#define PCI_1CS_3_BANK_SIZE					0xc94
+#define PCI_0CS_BOOT_BANK_SIZE					0xd14
+#define PCI_1CS_BOOT_BANK_SIZE					0xd94
+#define PCI_0P2P_MEM0_BAR_SIZE					0xd1c
+#define PCI_1P2P_MEM0_BAR_SIZE					0xd9c
+#define PCI_0P2P_MEM1_BAR_SIZE					0xd20
+#define PCI_1P2P_MEM1_BAR_SIZE					0xda0
+#define PCI_0P2P_I_O_BAR_SIZE					0xd24
+#define PCI_1P2P_I_O_BAR_SIZE					0xda4
+#define PCI_0CPU_BAR_SIZE					0xd28
+#define PCI_1CPU_BAR_SIZE					0xda8
+#define PCI_0DAC_SCS_0_BANK_SIZE				0xe00
+#define PCI_1DAC_SCS_0_BANK_SIZE				0xe80
+#define PCI_0DAC_SCS_1_BANK_SIZE				0xe04
+#define PCI_1DAC_SCS_1_BANK_SIZE				0xe84
+#define PCI_0DAC_SCS_2_BANK_SIZE				0xe08
+#define PCI_1DAC_SCS_2_BANK_SIZE				0xe88
+#define PCI_0DAC_SCS_3_BANK_SIZE				0xe0c
+#define PCI_1DAC_SCS_3_BANK_SIZE				0xe8c
+#define PCI_0DAC_CS_0_BANK_SIZE					0xe10
+#define PCI_1DAC_CS_0_BANK_SIZE					0xe90
+#define PCI_0DAC_CS_1_BANK_SIZE					0xe14
+#define PCI_1DAC_CS_1_BANK_SIZE					0xe94
+#define PCI_0DAC_CS_2_BANK_SIZE					0xe18
+#define PCI_1DAC_CS_2_BANK_SIZE					0xe98
+#define PCI_0DAC_CS_3_BANK_SIZE					0xe1c
+#define PCI_1DAC_CS_3_BANK_SIZE					0xe9c
+#define PCI_0DAC_BOOTCS_BANK_SIZE				0xe20
+#define PCI_1DAC_BOOTCS_BANK_SIZE				0xea0
+#define PCI_0DAC_P2P_MEM0_BAR_SIZE				0xe24
+#define PCI_1DAC_P2P_MEM0_BAR_SIZE				0xea4
+#define PCI_0DAC_P2P_MEM1_BAR_SIZE				0xe28
+#define PCI_1DAC_P2P_MEM1_BAR_SIZE				0xea8
+#define PCI_0DAC_CPU_BAR_SIZE					0xe2c
+#define PCI_1DAC_CPU_BAR_SIZE					0xeac
+#define PCI_0EXPANSION_ROM_BAR_SIZE				0xd2c
+#define PCI_1EXPANSION_ROM_BAR_SIZE				0xdac
+#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE			0xc3c
+#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE			0xcbc
+#define PCI_0SCS_0_BASE_ADDRESS_REMAP				0xc48
+#define PCI_1SCS_0_BASE_ADDRESS_REMAP				0xcc8
+#define PCI_0SCS_1_BASE_ADDRESS_REMAP				0xd48
+#define PCI_1SCS_1_BASE_ADDRESS_REMAP				0xdc8
+#define PCI_0SCS_2_BASE_ADDRESS_REMAP				0xc4c
+#define PCI_1SCS_2_BASE_ADDRESS_REMAP				0xccc
+#define PCI_0SCS_3_BASE_ADDRESS_REMAP				0xd4c
+#define PCI_1SCS_3_BASE_ADDRESS_REMAP				0xdcc
+#define PCI_0CS_0_BASE_ADDRESS_REMAP				0xc50
+#define PCI_1CS_0_BASE_ADDRESS_REMAP				0xcd0
+#define PCI_0CS_1_BASE_ADDRESS_REMAP				0xd50
+#define PCI_1CS_1_BASE_ADDRESS_REMAP				0xdd0
+#define PCI_0CS_2_BASE_ADDRESS_REMAP				0xd58
+#define PCI_1CS_2_BASE_ADDRESS_REMAP				0xdd8
+#define PCI_0CS_3_BASE_ADDRESS_REMAP				0xc54
+#define PCI_1CS_3_BASE_ADDRESS_REMAP				0xcd4
+#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP			0xd54
+#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP			0xdd4
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW			0xd5c
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW			0xddc
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH			0xd60
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH			0xde0
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW			0xd64
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW			0xde4
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH			0xd68
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH			0xde8
+#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP				0xd6c
+#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP				0xdec
+#define PCI_0CPU_BASE_ADDRESS_REMAP				0xd70
+#define PCI_1CPU_BASE_ADDRESS_REMAP				0xdf0
+#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP			0xf00
+#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP			0xff0
+#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP			0xf04
+#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP			0xf84
+#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP			0xf08
+#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP			0xf88
+#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP			0xf0c
+#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP			0xf8c
+#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP			0xf10
+#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP			0xf90
+#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP			0xf14
+#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP			0xf94
+#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP			0xf18
+#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP			0xf98
+#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP			0xf1c
+#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP			0xf9c
+#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP			0xf20
+#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP			0xfa0
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW		0xf24
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW		0xfa4
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		0xf28
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		0xfa8
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW		0xf2c
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW		0xfac
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		0xf30
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		0xfb0
+#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP				0xf34
+#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP				0xfb4
+#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP			0xf38
+#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP			0xfb8
+#define PCI_0ADDRESS_DECODE_CONTROL				0xd3c
+#define PCI_1ADDRESS_DECODE_CONTROL				0xdbc
+
+/*
+ * PCI Control
+ */
+
+#define PCI_0COMMAND						0xc00
+#define PCI_1COMMAND						0xc80
+#define PCI_0MODE						0xd00
+#define PCI_1MODE						0xd80
+#define PCI_0TIMEOUT_RETRY					0xc04
+#define PCI_1TIMEOUT_RETRY					0xc84
+#define PCI_0READ_BUFFER_DISCARD_TIMER				0xd04
+#define PCI_1READ_BUFFER_DISCARD_TIMER				0xd84
+#define MSI_0TRIGGER_TIMER					0xc38
+#define MSI_1TRIGGER_TIMER					0xcb8
+#define PCI_0ARBITER_CONTROL					0x1d00
+#define PCI_1ARBITER_CONTROL					0x1d80
+/* changing untill here */
+#define PCI_0CROSS_BAR_CONTROL_LOW				 0x1d08
+#define PCI_0CROSS_BAR_CONTROL_HIGH				 0x1d0c
+#define PCI_0CROSS_BAR_TIMEOUT					 0x1d04
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW		 0x1d18
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH		 0x1d1c
+#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER			 0x1d10
+#define PCI_0P2P_CONFIGURATION					 0x1d14
+#define PCI_0ACCESS_CONTROL_BASE_0_LOW				 0x1e00
+#define PCI_0ACCESS_CONTROL_BASE_0_HIGH				 0x1e04
+#define PCI_0ACCESS_CONTROL_TOP_0				 0x1e08
+#define PCI_0ACCESS_CONTROL_BASE_1_LOW				 0c1e10
+#define PCI_0ACCESS_CONTROL_BASE_1_HIGH				 0x1e14
+#define PCI_0ACCESS_CONTROL_TOP_1				 0x1e18
+#define PCI_0ACCESS_CONTROL_BASE_2_LOW				 0c1e20
+#define PCI_0ACCESS_CONTROL_BASE_2_HIGH				 0x1e24
+#define PCI_0ACCESS_CONTROL_TOP_2				 0x1e28
+#define PCI_0ACCESS_CONTROL_BASE_3_LOW				 0c1e30
+#define PCI_0ACCESS_CONTROL_BASE_3_HIGH				 0x1e34
+#define PCI_0ACCESS_CONTROL_TOP_3				 0x1e38
+#define PCI_0ACCESS_CONTROL_BASE_4_LOW				 0c1e40
+#define PCI_0ACCESS_CONTROL_BASE_4_HIGH				 0x1e44
+#define PCI_0ACCESS_CONTROL_TOP_4				 0x1e48
+#define PCI_0ACCESS_CONTROL_BASE_5_LOW				 0c1e50
+#define PCI_0ACCESS_CONTROL_BASE_5_HIGH				 0x1e54
+#define PCI_0ACCESS_CONTROL_TOP_5				 0x1e58
+#define PCI_0ACCESS_CONTROL_BASE_6_LOW				 0c1e60
+#define PCI_0ACCESS_CONTROL_BASE_6_HIGH				 0x1e64
+#define PCI_0ACCESS_CONTROL_TOP_6				 0x1e68
+#define PCI_0ACCESS_CONTROL_BASE_7_LOW				 0c1e70
+#define PCI_0ACCESS_CONTROL_BASE_7_HIGH				 0x1e74
+#define PCI_0ACCESS_CONTROL_TOP_7				 0x1e78
+#define PCI_1CROSS_BAR_CONTROL_LOW				 0x1d88
+#define PCI_1CROSS_BAR_CONTROL_HIGH				 0x1d8c
+#define PCI_1CROSS_BAR_TIMEOUT					 0x1d84
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW		 0x1d98
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH		 0x1d9c
+#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER			 0x1d90
+#define PCI_1P2P_CONFIGURATION					 0x1d94
+#define PCI_1ACCESS_CONTROL_BASE_0_LOW				 0x1e80
+#define PCI_1ACCESS_CONTROL_BASE_0_HIGH				 0x1e84
+#define PCI_1ACCESS_CONTROL_TOP_0				 0x1e88
+#define PCI_1ACCESS_CONTROL_BASE_1_LOW				 0c1e90
+#define PCI_1ACCESS_CONTROL_BASE_1_HIGH				 0x1e94
+#define PCI_1ACCESS_CONTROL_TOP_1				 0x1e98
+#define PCI_1ACCESS_CONTROL_BASE_2_LOW				 0c1ea0
+#define PCI_1ACCESS_CONTROL_BASE_2_HIGH				 0x1ea4
+#define PCI_1ACCESS_CONTROL_TOP_2				 0x1ea8
+#define PCI_1ACCESS_CONTROL_BASE_3_LOW				 0c1eb0
+#define PCI_1ACCESS_CONTROL_BASE_3_HIGH				 0x1eb4
+#define PCI_1ACCESS_CONTROL_TOP_3				 0x1eb8
+#define PCI_1ACCESS_CONTROL_BASE_4_LOW				 0c1ec0
+#define PCI_1ACCESS_CONTROL_BASE_4_HIGH				 0x1ec4
+#define PCI_1ACCESS_CONTROL_TOP_4				 0x1ec8
+#define PCI_1ACCESS_CONTROL_BASE_5_LOW				 0c1ed0
+#define PCI_1ACCESS_CONTROL_BASE_5_HIGH				 0x1ed4
+#define PCI_1ACCESS_CONTROL_TOP_5				 0x1ed8
+#define PCI_1ACCESS_CONTROL_BASE_6_LOW				 0c1ee0
+#define PCI_1ACCESS_CONTROL_BASE_6_HIGH				 0x1ee4
+#define PCI_1ACCESS_CONTROL_TOP_6				 0x1ee8
+#define PCI_1ACCESS_CONTROL_BASE_7_LOW				 0c1ef0
+#define PCI_1ACCESS_CONTROL_BASE_7_HIGH				 0x1ef4
+#define PCI_1ACCESS_CONTROL_TOP_7				 0x1ef8
+
+/*
+ * PCI Snoop Control
+ */
+
+#define PCI_0SNOOP_CONTROL_BASE_0_LOW				 0x1f00
+#define PCI_0SNOOP_CONTROL_BASE_0_HIGH				 0x1f04
+#define PCI_0SNOOP_CONTROL_TOP_0				 0x1f08
+#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW				 0x1f10
+#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH			 0x1f14
+#define PCI_0SNOOP_CONTROL_TOP_1				 0x1f18
+#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW				 0x1f20
+#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH			 0x1f24
+#define PCI_0SNOOP_CONTROL_TOP_2				 0x1f28
+#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW				 0x1f30
+#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH			 0x1f34
+#define PCI_0SNOOP_CONTROL_TOP_3				 0x1f38
+#define PCI_1SNOOP_CONTROL_BASE_0_LOW				 0x1f80
+#define PCI_1SNOOP_CONTROL_BASE_0_HIGH				 0x1f84
+#define PCI_1SNOOP_CONTROL_TOP_0				 0x1f88
+#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW				 0x1f90
+#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH			 0x1f94
+#define PCI_1SNOOP_CONTROL_TOP_1				 0x1f98
+#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW				 0x1fa0
+#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH			 0x1fa4
+#define PCI_1SNOOP_CONTROL_TOP_2				 0x1fa8
+#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW				 0x1fb0
+#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH			 0x1fb4
+#define PCI_1SNOOP_CONTROL_TOP_3				 0x1fb8
+
+/*
+ * PCI Configuration Address
+ */
+
+#define PCI_0CONFIGURATION_ADDRESS				0xcf8
+#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER		0xcfc
+#define PCI_1CONFIGURATION_ADDRESS				0xc78
+#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER		0xc7c
+#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER		0xc34
+#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER		0xcb4
+
+/*
+ * PCI Error Report
+ */
+
+#define PCI_0SERR_MASK						 0xc28
+#define PCI_0ERROR_ADDRESS_LOW					 0x1d40
+#define PCI_0ERROR_ADDRESS_HIGH					 0x1d44
+#define PCI_0ERROR_DATA_LOW					 0x1d48
+#define PCI_0ERROR_DATA_HIGH					 0x1d4c
+#define PCI_0ERROR_COMMAND					 0x1d50
+#define PCI_0ERROR_CAUSE					 0x1d58
+#define PCI_0ERROR_MASK						 0x1d5c
+
+#define PCI_1SERR_MASK						 0xca8
+#define PCI_1ERROR_ADDRESS_LOW					 0x1dc0
+#define PCI_1ERROR_ADDRESS_HIGH					 0x1dc4
+#define PCI_1ERROR_DATA_LOW					 0x1dc8
+#define PCI_1ERROR_DATA_HIGH					 0x1dcc
+#define PCI_1ERROR_COMMAND					 0x1dd0
+#define PCI_1ERROR_CAUSE					 0x1dd8
+#define PCI_1ERROR_MASK						 0x1ddc
+
+
+/*
+ * Lslave Debug	 (for internal use)
+ */
+
+#define L_SLAVE_X0_ADDRESS					0x1d20
+#define L_SLAVE_X0_COMMAND_AND_ID				0x1d24
+#define L_SLAVE_X1_ADDRESS					0x1d28
+#define L_SLAVE_X1_COMMAND_AND_ID				0x1d2c
+#define L_SLAVE_WRITE_DATA_LOW					0x1d30
+#define L_SLAVE_WRITE_DATA_HIGH					0x1d34
+#define L_SLAVE_WRITE_BYTE_ENABLE				0x1d60
+#define L_SLAVE_READ_DATA_LOW					0x1d38
+#define L_SLAVE_READ_DATA_HIGH					0x1d3c
+#define L_SLAVE_READ_ID						0x1d64
+
+#if 0 /* Disabled because PCI_* namespace belongs to PCI subsystem ... */
+
+/*
+ * PCI Configuration Function 0
+ */
+
+#define PCI_DEVICE_AND_VENDOR_ID				0x000
+#define PCI_STATUS_AND_COMMAND					0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID				0x008
+#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE		0x00C
+#define PCI_SCS_0_BASE_ADDRESS					0x010
+#define PCI_SCS_1_BASE_ADDRESS					0x014
+#define PCI_SCS_2_BASE_ADDRESS					0x018
+#define PCI_SCS_3_BASE_ADDRESS					0x01C
+#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS	0x020
+#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS		0x024
+#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID		0x02C
+#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER			0x030
+#define PCI_CAPABILTY_LIST_POINTER				0x034
+#define PCI_INTERRUPT_PIN_AND_LINE				0x03C
+#define PCI_POWER_MANAGEMENT_CAPABILITY				0x040
+#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL			0x044
+#define PCI_VPD_ADDRESS						0x048
+#define PCI_VPD_DATA						0X04c
+#define PCI_MSI_MESSAGE_CONTROL					0x050
+#define PCI_MSI_MESSAGE_ADDRESS					0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDRESS				0x058
+#define PCI_MSI_MESSAGE_DATA					0x05c
+#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY			0x058
+
+/*
+ * PCI Configuration Function 1
+ */
+
+#define PCI_CS_0_BASE_ADDRESS					0x110
+#define PCI_CS_1_BASE_ADDRESS					0x114
+#define PCI_CS_2_BASE_ADDRESS					0x118
+#define PCI_CS_3_BASE_ADDRESS					0x11c
+#define PCI_BOOTCS_BASE_ADDRESS					0x120
+
+/*
+ * PCI Configuration Function 2
+ */
+
+#define PCI_P2P_MEM0_BASE_ADDRESS				0x210
+#define PCI_P2P_MEM1_BASE_ADDRESS				0x214
+#define PCI_P2P_I_O_BASE_ADDRESS				0x218
+#define PCI_CPU_BASE_ADDRESS					0x21c
+
+/*
+ * PCI Configuration Function 4
+ */
+
+#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW				0x410
+#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH				0x414
+#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW				0x418
+#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH				0x41c
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW			0x420
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH			0x424
+
+
+/*
+ * PCI Configuration Function 5
+ */
+
+#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW				0x510
+#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH				0x514
+#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW				0x518
+#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH				0x51c
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW			0x520
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH			0x524
+
+
+/*
+ * PCI Configuration Function 6
+ */
+
+#define PCI_DAC_CS_0_BASE_ADDRESS_LOW				0x610
+#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH				0x614
+#define PCI_DAC_CS_1_BASE_ADDRESS_LOW				0x618
+#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH				0x61c
+#define PCI_DAC_CS_2_BASE_ADDRESS_LOW				0x620
+#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH				0x624
+
+/*
+ * PCI Configuration Function 7
+ */
+
+#define PCI_DAC_CS_3_BASE_ADDRESS_LOW				0x710
+#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH				0x714
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW				0x718
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH			0x71c
+#define PCI_DAC_CPU_BASE_ADDRESS_LOW				0x720
+#define PCI_DAC_CPU_BASE_ADDRESS_HIGH				0x724
+#endif
+
+/*
+ * Interrupts
+ */
+
+#define LOW_INTERRUPT_CAUSE_REGISTER				0xc18
+#define HIGH_INTERRUPT_CAUSE_REGISTER				0xc68
+#define CPU_INTERRUPT_MASK_REGISTER_LOW				0xc1c
+#define CPU_INTERRUPT_MASK_REGISTER_HIGH			0xc6c
+#define CPU_SELECT_CAUSE_REGISTER				0xc70
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW			0xc24
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH			0xc64
+#define PCI_0SELECT_CAUSE					0xc74
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW			0xca4
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH			0xce4
+#define PCI_1SELECT_CAUSE					0xcf4
+#define CPU_INT_0_MASK						0xe60
+#define CPU_INT_1_MASK						0xe64
+#define CPU_INT_2_MASK						0xe68
+#define CPU_INT_3_MASK						0xe6c
+
+/*
+ * I20 Support registers
+ */
+
+#define INBOUND_MESSAGE_REGISTER0_PCI0_SIDE			0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI0_SIDE			0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI0_SIDE			0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI0_SIDE			0x01C
+#define INBOUND_DOORBELL_REGISTER_PCI0_SIDE			0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI0_SIDE		0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI0_SIDE		0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI0_SIDE			0x02C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI0_SIDE		0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI0_SIDE		0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI0_SIDE		0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI0_SIDE		0x044
+#define QUEUE_CONTROL_REGISTER_PCI0_SIDE			0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI0_SIDE			0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI0_SIDE		0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI0_SIDE		0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI0_SIDE		0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI0_SIDE		0x06C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI0_SIDE		0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI0_SIDE		0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI0_SIDE		0x0F8
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI0_SIDE		0x0FC
+
+#define INBOUND_MESSAGE_REGISTER0_PCI1_SIDE			0x090
+#define INBOUND_MESSAGE_REGISTER1_PCI1_SIDE			0x094
+#define OUTBOUND_MESSAGE_REGISTER0_PCI1_SIDE			0x098
+#define OUTBOUND_MESSAGE_REGISTER1_PCI1_SIDE			0x09C
+#define INBOUND_DOORBELL_REGISTER_PCI1_SIDE			0x0A0
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI1_SIDE		0x0A4
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI1_SIDE		0x0A8
+#define OUTBOUND_DOORBELL_REGISTER_PCI1_SIDE			0x0AC
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI1_SIDE		0x0B0
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI1_SIDE		0x0B4
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI1_SIDE		0x0C0
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI1_SIDE		0x0C4
+#define QUEUE_CONTROL_REGISTER_PCI1_SIDE			0x0D0
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI1_SIDE			0x0D4
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI1_SIDE		0x0E0
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI1_SIDE		0x0E4
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI1_SIDE		0x0E8
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI1_SIDE		0x0EC
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI1_SIDE		0x0F0
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI1_SIDE		0x0F4
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI1_SIDE		0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI1_SIDE		0x07C
+
+#define INBOUND_MESSAGE_REGISTER0_CPU0_SIDE			0X1C10
+#define INBOUND_MESSAGE_REGISTER1_CPU0_SIDE			0X1C14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU0_SIDE			0X1C18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU0_SIDE			0X1C1C
+#define INBOUND_DOORBELL_REGISTER_CPU0_SIDE			0X1C20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU0_SIDE		0X1C24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU0_SIDE		0X1C28
+#define OUTBOUND_DOORBELL_REGISTER_CPU0_SIDE			0X1C2C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU0_SIDE		0X1C30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU0_SIDE		0X1C34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU0_SIDE		0X1C40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU0_SIDE		0X1C44
+#define QUEUE_CONTROL_REGISTER_CPU0_SIDE			0X1C50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU0_SIDE			0X1C54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU0_SIDE		0X1C60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU0_SIDE		0X1C64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU0_SIDE		0X1C68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU0_SIDE		0X1C6C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU0_SIDE		0X1C70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU0_SIDE		0X1C74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU0_SIDE		0X1CF8
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU0_SIDE		0X1CFC
+
+#define INBOUND_MESSAGE_REGISTER0_CPU1_SIDE			0X1C90
+#define INBOUND_MESSAGE_REGISTER1_CPU1_SIDE			0X1C94
+#define OUTBOUND_MESSAGE_REGISTER0_CPU1_SIDE			0X1C98
+#define OUTBOUND_MESSAGE_REGISTER1_CPU1_SIDE			0X1C9C
+#define INBOUND_DOORBELL_REGISTER_CPU1_SIDE			0X1CA0
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU1_SIDE		0X1CA4
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU1_SIDE		0X1CA8
+#define OUTBOUND_DOORBELL_REGISTER_CPU1_SIDE			0X1CAC
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU1_SIDE		0X1CB0
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU1_SIDE		0X1CB4
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU1_SIDE		0X1CC0
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU1_SIDE		0X1CC4
+#define QUEUE_CONTROL_REGISTER_CPU1_SIDE			0X1CD0
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU1_SIDE			0X1CD4
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU1_SIDE		0X1CE0
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU1_SIDE		0X1CE4
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU1_SIDE		0X1CE8
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU1_SIDE		0X1CEC
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU1_SIDE		0X1CF0
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU1_SIDE		0X1CF4
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU1_SIDE		0X1C78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU1_SIDE		0X1C7C
+
+/*
+ * Communication Unit Registers
+ */
+
+#define ETHERNET_0_ADDRESS_CONTROL_LOW
+#define ETHERNET_0_ADDRESS_CONTROL_HIGH				0xf204
+#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		0xf208
+#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		0xf20c
+#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf210
+#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf214
+#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS			0xf218
+#define ETHERNET_1_ADDRESS_CONTROL_LOW				0xf220
+#define ETHERNET_1_ADDRESS_CONTROL_HIGH				0xf224
+#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		0xf228
+#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		0xf22c
+#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf230
+#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf234
+#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS			0xf238
+#define ETHERNET_2_ADDRESS_CONTROL_LOW				0xf240
+#define ETHERNET_2_ADDRESS_CONTROL_HIGH				0xf244
+#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		0xf248
+#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		0xf24c
+#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf250
+#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf254
+#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS			0xf258
+#define MPSC_0_ADDRESS_CONTROL_LOW				0xf280
+#define MPSC_0_ADDRESS_CONTROL_HIGH				0xf284
+#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS			0xf288
+#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS			0xf28c
+#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf290
+#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf294
+#define MPSC_1_ADDRESS_CONTROL_LOW				0xf2a0
+#define MPSC_1_ADDRESS_CONTROL_HIGH				0xf2a4
+#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS			0xf2a8
+#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS			0xf2ac
+#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf2b0
+#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf2b4
+#define MPSC_2_ADDRESS_CONTROL_LOW				0xf2c0
+#define MPSC_2_ADDRESS_CONTROL_HIGH				0xf2c4
+#define MPSC_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS			0xf2c8
+#define MPSC_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS			0xf2cc
+#define MPSC_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf2d0
+#define MPSC_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS		0xf2d4
+#define SERIAL_INIT_PCI_HIGH_ADDRESS				0xf320
+#define SERIAL_INIT_LAST_DATA					0xf324
+#define SERIAL_INIT_STATUS_AND_CONTROL				0xf328
+#define COMM_UNIT_ARBITER_CONTROL				0xf300
+#define COMM_UNIT_CROSS_BAR_TIMEOUT				0xf304
+#define COMM_UNIT_INTERRUPT_CAUSE				0xf310
+#define COMM_UNIT_INTERRUPT_MASK				0xf314
+#define COMM_UNIT_ERROR_ADDRESS					0xf314
+
+/*
+ * Cunit Debug	(for internal use)
+ */
+
+#define CUNIT_ADDRESS						0xf340
+#define CUNIT_COMMAND_AND_ID					0xf344
+#define CUNIT_WRITE_DATA_LOW					0xf348
+#define CUNIT_WRITE_DATA_HIGH					0xf34c
+#define CUNIT_WRITE_BYTE_ENABLE					0xf358
+#define CUNIT_READ_DATA_LOW					0xf350
+#define CUNIT_READ_DATA_HIGH					0xf354
+#define CUNIT_READ_ID						0xf35c
+
+/*
+ * Fast Ethernet Unit Registers
+ */
+
+/* Ethernet */
+
+#define ETHERNET_PHY_ADDRESS_REGISTER				0x2000
+#define ETHERNET_SMI_REGISTER					0x2010
+
+/* Ethernet 0 */
+
+#define ETHERNET0_PORT_CONFIGURATION_REGISTER			0x2400
+#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER		0x2408
+#define ETHERNET0_PORT_COMMAND_REGISTER				0x2410
+#define ETHERNET0_PORT_STATUS_REGISTER				0x2418
+#define ETHERNET0_SERIAL_PARAMETRS_REGISTER			0x2420
+#define ETHERNET0_HASH_TABLE_POINTER_REGISTER			0x2428
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2430
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2438
+#define ETHERNET0_SDMA_CONFIGURATION_REGISTER			0x2440
+#define ETHERNET0_SDMA_COMMAND_REGISTER				0x2448
+#define ETHERNET0_INTERRUPT_CAUSE_REGISTER			0x2450
+#define ETHERNET0_INTERRUPT_MASK_REGISTER			0x2458
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0			0x2480
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1			0x2484
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2			0x2488
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3			0x248c
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0		0x24a0
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1		0x24a4
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2		0x24a8
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3		0x24ac
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0		0x24e0
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1		0x24e4
+#define ETHERNET0_MIB_COUNTER_BASE				0x2500
+
+/* Ethernet 1 */
+
+#define ETHERNET1_PORT_CONFIGURATION_REGISTER			0x2800
+#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER		0x2808
+#define ETHERNET1_PORT_COMMAND_REGISTER				0x2810
+#define ETHERNET1_PORT_STATUS_REGISTER				0x2818
+#define ETHERNET1_SERIAL_PARAMETRS_REGISTER			0x2820
+#define ETHERNET1_HASH_TABLE_POINTER_REGISTER			0x2828
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2830
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2838
+#define ETHERNET1_SDMA_CONFIGURATION_REGISTER			0x2840
+#define ETHERNET1_SDMA_COMMAND_REGISTER				0x2848
+#define ETHERNET1_INTERRUPT_CAUSE_REGISTER			0x2850
+#define ETHERNET1_INTERRUPT_MASK_REGISTER			0x2858
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0			0x2880
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1			0x2884
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2			0x2888
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3			0x288c
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0		0x28a0
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1		0x28a4
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2		0x28a8
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3		0x28ac
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0		0x28e0
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1		0x28e4
+#define ETHERNET1_MIB_COUNTER_BASE				0x2900
+
+/* Ethernet 2 */
+
+#define ETHERNET2_PORT_CONFIGURATION_REGISTER			0x2c00
+#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER		0x2c08
+#define ETHERNET2_PORT_COMMAND_REGISTER				0x2c10
+#define ETHERNET2_PORT_STATUS_REGISTER				0x2c18
+#define ETHERNET2_SERIAL_PARAMETRS_REGISTER			0x2c20
+#define ETHERNET2_HASH_TABLE_POINTER_REGISTER			0x2c28
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2c30
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2c38
+#define ETHERNET2_SDMA_CONFIGURATION_REGISTER			0x2c40
+#define ETHERNET2_SDMA_COMMAND_REGISTER				0x2c48
+#define ETHERNET2_INTERRUPT_CAUSE_REGISTER			0x2c50
+#define ETHERNET2_INTERRUPT_MASK_REGISTER			0x2c58
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0			0x2c80
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1			0x2c84
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2			0x2c88
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3			0x2c8c
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0		0x2ca0
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1		0x2ca4
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2		0x2ca8
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3		0x2cac
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0		0x2ce0
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1		0x2ce4
+#define ETHERNET2_MIB_COUNTER_BASE				0x2d00
+
+/*
+ * SDMA Registers
+ */
+
+#define SDMA_GROUP_CONFIGURATION_REGISTER			0xb1f0
+#define CHANNEL0_CONFIGURATION_REGISTER				0x4000
+#define CHANNEL0_COMMAND_REGISTER				0x4008
+#define CHANNEL0_RX_CMD_STATUS					0x4800
+#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES			0x4804
+#define CHANNEL0_RX_BUFFER_POINTER				0x4808
+#define CHANNEL0_RX_NEXT_POINTER				0x480c
+#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER			0x4810
+#define CHANNEL0_TX_CMD_STATUS					0x4C00
+#define CHANNEL0_TX_PACKET_SIZE					0x4C04
+#define CHANNEL0_TX_BUFFER_POINTER				0x4C08
+#define CHANNEL0_TX_NEXT_POINTER				0x4C0c
+#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER			0x4c10
+#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER			0x4c14
+#define CHANNEL1_CONFIGURATION_REGISTER				0x6000
+#define CHANNEL1_COMMAND_REGISTER				0x6008
+#define CHANNEL1_RX_CMD_STATUS					0x6800
+#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES			0x6804
+#define CHANNEL1_RX_BUFFER_POINTER				0x6808
+#define CHANNEL1_RX_NEXT_POINTER				0x680c
+#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER			0x6810
+#define CHANNEL1_TX_CMD_STATUS					0x6C00
+#define CHANNEL1_TX_PACKET_SIZE					0x6C04
+#define CHANNEL1_TX_BUFFER_POINTER				0x6C08
+#define CHANNEL1_TX_NEXT_POINTER				0x6C0c
+#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER			0x6810
+#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER			0x6c10
+#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER			0x6c14
+
+/* SDMA Interrupt */
+
+#define SDMA_CAUSE						0xb820
+#define SDMA_MASK						0xb8a0
+
+
+/*
+ * Baude Rate Generators Registers
+ */
+
+/* BRG 0 */
+
+#define BRG0_CONFIGURATION_REGISTER				0xb200
+#define BRG0_BAUDE_TUNING_REGISTER				0xb204
+
+/* BRG 1 */
+
+#define BRG1_CONFIGURATION_REGISTER				0xb208
+#define BRG1_BAUDE_TUNING_REGISTER				0xb20c
+
+/* BRG 2 */
+
+#define BRG2_CONFIGURATION_REGISTER				0xb210
+#define BRG2_BAUDE_TUNING_REGISTER				0xb214
+
+/* BRG Interrupts */
+
+#define BRG_CAUSE_REGISTER					0xb834
+#define BRG_MASK_REGISTER					0xb8b4
+
+/* MISC */
+
+#define MAIN_ROUTING_REGISTER					0xb400
+#define RECEIVE_CLOCK_ROUTING_REGISTER				0xb404
+#define TRANSMIT_CLOCK_ROUTING_REGISTER				0xb408
+#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER		0xb40c
+#define WATCHDOG_CONFIGURATION_REGISTER				0xb410
+#define WATCHDOG_VALUE_REGISTER					0xb414
+
+
+/*
+ * Flex TDM Registers
+ */
+
+/* FTDM Port */
+
+#define FLEXTDM_TRANSMIT_READ_POINTER				0xa800
+#define FLEXTDM_RECEIVE_READ_POINTER				0xa804
+#define FLEXTDM_CONFIGURATION_REGISTER				0xa808
+#define FLEXTDM_AUX_CHANNELA_TX_REGISTER			0xa80c
+#define FLEXTDM_AUX_CHANNELA_RX_REGISTER			0xa810
+#define FLEXTDM_AUX_CHANNELB_TX_REGISTER			0xa814
+#define FLEXTDM_AUX_CHANNELB_RX_REGISTER			0xa818
+
+/* FTDM Interrupts */
+
+#define FTDM_CAUSE_REGISTER					0xb830
+#define FTDM_MASK_REGISTER					0xb8b0
+
+
+/*
+ * GPP Interface Registers
+ */
+
+#define GPP_IO_CONTROL						0xf100
+#define GPP_LEVEL_CONTROL					0xf110
+#define GPP_VALUE						0xf104
+#define GPP_INTERRUPT_CAUSE					0xf108
+#define GPP_INTERRUPT_MASK					0xf10c
+
+#define MPP_CONTROL0						0xf000
+#define MPP_CONTROL1						0xf004
+#define MPP_CONTROL2						0xf008
+#define MPP_CONTROL3						0xf00c
+#define DEBUG_PORT_MULTIPLEX					0xf014
+#define SERIAL_PORT_MULTIPLEX					0xf010
+
+/*
+ * I2C Registers
+ */
+
+#define I2C_SLAVE_ADDRESS					0xc000
+#define I2C_EXTENDED_SLAVE_ADDRESS				0xc040
+#define I2C_DATA						0xc004
+#define I2C_CONTROL						0xc008
+#define I2C_STATUS_BAUDE_RATE					0xc00C
+#define I2C_SOFT_RESET						0xc01c
+
+/*
+ * MPSC Registers
+ */
+
+/*
+ * MPSC0
+ */
+
+#define MPSC0_MAIN_CONFIGURATION_LOW				0x8000
+#define MPSC0_MAIN_CONFIGURATION_HIGH				0x8004
+#define MPSC0_PROTOCOL_CONFIGURATION				0x8008
+#define CHANNEL0_REGISTER1					0x800c
+#define CHANNEL0_REGISTER2					0x8010
+#define CHANNEL0_REGISTER3					0x8014
+#define CHANNEL0_REGISTER4					0x8018
+#define CHANNEL0_REGISTER5					0x801c
+#define CHANNEL0_REGISTER6					0x8020
+#define CHANNEL0_REGISTER7					0x8024
+#define CHANNEL0_REGISTER8					0x8028
+#define CHANNEL0_REGISTER9					0x802c
+#define CHANNEL0_REGISTER10					0x8030
+#define CHANNEL0_REGISTER11					0x8034
+
+/*
+ * MPSC1
+ */
+
+#define MPSC1_MAIN_CONFIGURATION_LOW				0x9000
+#define MPSC1_MAIN_CONFIGURATION_HIGH				0x9004
+#define MPSC1_PROTOCOL_CONFIGURATION				0x9008
+#define CHANNEL1_REGISTER1					0x900c
+#define CHANNEL1_REGISTER2					0x9010
+#define CHANNEL1_REGISTER3					0x9014
+#define CHANNEL1_REGISTER4					0x9018
+#define CHANNEL1_REGISTER5					0x901c
+#define CHANNEL1_REGISTER6					0x9020
+#define CHANNEL1_REGISTER7					0x9024
+#define CHANNEL1_REGISTER8					0x9028
+#define CHANNEL1_REGISTER9					0x902c
+#define CHANNEL1_REGISTER10					0x9030
+#define CHANNEL1_REGISTER11					0x9034
+
+/*
+ * MPSCs Interupts
+ */
+
+#define MPSC0_CAUSE						0xb804
+#define MPSC0_MASK						0xb884
+#define MPSC1_CAUSE						0xb80c
+#define MPSC1_MASK						0xb88c
+
+#endif	/* __ASM_MIPS_MV64240_H */
diff --git a/include/asm-mips/hardirq.h b/include/asm-mips/hardirq.h
new file mode 100644
index 000000000000..90bf399e6dd9
--- /dev/null
+++ b/include/asm-mips/hardirq.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
new file mode 100644
index 000000000000..f524eaccd5f1
--- /dev/null
+++ b/include/asm-mips/hazards.h
@@ -0,0 +1,217 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef _ASM_HAZARDS_H
+#define _ASM_HAZARDS_H
+
+#include <linux/config.h>
+
+#ifdef __ASSEMBLY__
+
+	.macro	_ssnop
+	sll	$0, $0, 1
+	.endm
+
+	.macro	_ehb
+	sll	$0, $0, 3
+	.endm
+
+/*
+ * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+#ifdef CONFIG_CPU_RM9000
+
+	.macro	mtc0_tlbw_hazard
+	.set	push
+	.set	mips32
+	_ssnop; _ssnop; _ssnop; _ssnop
+	.set	pop
+	.endm
+
+	.macro	tlbw_eret_hazard
+	.set	push
+	.set	mips32
+	_ssnop; _ssnop; _ssnop; _ssnop
+	.set	pop
+	.endm
+
+#else
+
+/*
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400.  Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+	.macro	mtc0_tlbw_hazard
+	b	. + 8
+	.endm
+
+	.macro	tlbw_eret_hazard
+	.endm
+#endif
+
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+
+#define irq_enable_hazard
+	_ehb
+
+#define irq_disable_hazard
+	_ehb
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+#define irq_enable_hazard
+
+#define irq_disable_hazard
+
+#else
+
+/*
+ * Classic MIPS needs 1 - 3 nops or ssnops
+ */
+#define irq_enable_hazard
+#define irq_disable_hazard						\
+	_ssnop; _ssnop; _ssnop
+
+#endif
+
+#else /* __ASSEMBLY__ */
+
+__asm__(
+	"	.macro	_ssnop					\n\t"
+	"	sll	$0, $2, 1				\n\t"
+	"	.endm						\n\t"
+	"							\n\t"
+	"	.macro	_ehb					\n\t"
+	"	sll	$0, $0, 3				\n\t"
+	"	.endm						\n\t");
+
+#ifdef CONFIG_CPU_RM9000
+/*
+ * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+
+#define mtc0_tlbw_hazard()						\
+	__asm__ __volatile__(						\
+		".set\tmips32\n\t"					\
+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
+		".set\tmips0")
+
+#define tlbw_use_hazard()						\
+	__asm__ __volatile__(						\
+		".set\tmips32\n\t"					\
+		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
+		".set\tmips0")
+#else
+
+/*
+ * Overkill warning ...
+ */
+#define mtc0_tlbw_hazard()						\
+	__asm__ __volatile__(						\
+		".set noreorder\n\t"					\
+		"nop; nop; nop; nop; nop; nop;\n\t"			\
+		".set reorder\n\t")
+
+#define tlbw_use_hazard()						\
+	__asm__ __volatile__(						\
+		".set noreorder\n\t"					\
+		"nop; nop; nop; nop; nop; nop;\n\t"			\
+		".set reorder\n\t")
+
+#endif
+
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+__asm__(
+	"	.macro\tirq_enable_hazard			\n\t"
+	"	_ehb						\n\t"
+	"	.endm						\n\t"
+	"							\n\t"
+	"	.macro\tirq_disable_hazard			\n\t"
+	"	_ehb						\n\t"
+	"	.endm");
+
+#define irq_enable_hazard()						\
+	__asm__ __volatile__(						\
+	"_ehb\t\t\t\t# irq_enable_hazard")
+
+#define irq_disable_hazard()						\
+	__asm__ __volatile__(						\
+	"_ehb\t\t\t\t# irq_disable_hazard")
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+__asm__(
+	"	.macro\tirq_enable_hazard			\n\t"
+	"	.endm						\n\t"
+	"							\n\t"
+	"	.macro\tirq_disable_hazard			\n\t"
+	"	.endm");
+
+#define irq_enable_hazard()	do { } while (0)
+#define irq_disable_hazard()	do { } while (0)
+
+#else
+
+/*
+ * Default for classic MIPS processors.  Assume worst case hazards but don't
+ * care about the irq_enable_hazard - sooner or later the hardware will
+ * enable it and we don't care when exactly.
+ */
+
+__asm__(
+	"	#						\n\t"
+	"	# There is a hazard but we do not care		\n\t"
+	"	#						\n\t"
+	"	.macro\tirq_enable_hazard			\n\t"
+	"	.endm						\n\t"
+	"							\n\t"
+	"	.macro\tirq_disable_hazard			\n\t"
+	"	_ssnop; _ssnop; _ssnop				\n\t"
+	"	.endm");
+
+#define irq_enable_hazard()	do { } while (0)
+#define irq_disable_hazard()						\
+	__asm__ __volatile__(						\
+	"_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_HAZARDS_H */
diff --git a/include/asm-mips/hdreg.h b/include/asm-mips/hdreg.h
new file mode 100644
index 000000000000..5989bbc97cbf
--- /dev/null
+++ b/include/asm-mips/hdreg.h
@@ -0,0 +1 @@
+#warning this file is obsolete, please do not use it
diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h
new file mode 100644
index 000000000000..f49930d947d4
--- /dev/null
+++ b/include/asm-mips/highmem.h
@@ -0,0 +1,103 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE (0xfe000000UL)
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void * kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+/*
+ * CONFIG_LIMITED_DMA is for systems with DMA limitations such as Momentum's
+ * Jaguar ATX.  This option exploits the highmem code in the kernel so is
+ * always enabled together with CONFIG_HIGHMEM but at this time doesn't
+ * actually add highmem functionality.
+ */
+
+#ifdef CONFIG_LIMITED_DMA
+
+/*
+ * These are the default functions for the no-highmem case from
+ * <linux/highmem.h>
+ */
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	return page_address(page);
+}
+
+#define kunmap(page) do { (void) (page); } while (0)
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	return page_address(page);
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type) { }
+
+#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
+
+#define flush_cache_kmaps()	do { } while (0)
+
+#else /* LIMITED_DMA */
+
+extern void *__kmap(struct page *page);
+extern void __kunmap(struct page *page);
+extern void *__kmap_atomic(struct page *page, enum km_type type);
+extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *__kmap_atomic_to_page(void *ptr);
+
+#define kmap			__kmap
+#define kunmap			__kunmap
+#define kmap_atomic		__kmap_atomic
+#define kunmap_atomic		__kunmap_atomic
+#define kmap_atomic_to_page	__kmap_atomic_to_page
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* LIMITED_DMA */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-mips/hp-lj/asic.h b/include/asm-mips/hp-lj/asic.h
new file mode 100644
index 000000000000..fc2ca656da00
--- /dev/null
+++ b/include/asm-mips/hp-lj/asic.h
@@ -0,0 +1,7 @@
+
+typedef enum { IllegalAsic, UnknownAsic, AndrosAsic, HarmonyAsic } AsicId;
+
+AsicId GetAsicId(void);
+
+const char* const GetAsicName(void);
+
diff --git a/include/asm-mips/hw_irq.h b/include/asm-mips/hw_irq.h
new file mode 100644
index 000000000000..c854d017c0e5
--- /dev/null
+++ b/include/asm-mips/hw_irq.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2001, 2002 by Ralf Baechle
+ */
+#ifndef __ASM_HW_IRQ_H
+#define __ASM_HW_IRQ_H
+
+#include <linux/profile.h>
+#include <asm/atomic.h>
+
+extern void disable_8259A_irq(unsigned int irq);
+extern void enable_8259A_irq(unsigned int irq);
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+extern void init_8259A(int aeoi);
+
+extern atomic_t irq_err_count;
+
+/* This may not be apropriate for all machines, we'll see ...  */
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+}
+
+#endif /* __ASM_HW_IRQ_H */
diff --git a/include/asm-mips/i8259.h b/include/asm-mips/i8259.h
new file mode 100644
index 000000000000..0214abe3f0af
--- /dev/null
+++ b/include/asm-mips/i8259.h
@@ -0,0 +1,67 @@
+/*
+ *	include/asm-mips/i8259.h
+ *
+ *	i8259A interrupt definitions.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *	Copyright (C) 2003  Ralf Baechle <ralf@linux-mips.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_I8259_H
+#define _ASM_I8259_H
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+
+extern spinlock_t i8259A_lock;
+
+extern void init_i8259_irqs(void);
+
+/*
+ * Do the traditional i8259 interrupt polling thing.  This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int i8259_irq(void)
+{
+	int irq;
+
+	spin_lock(&i8259A_lock);
+
+	/* Perform an interrupt acknowledge cycle on controller 1. */
+	outb(0x0C, 0x20);		/* prepare for poll */
+	irq = inb(0x20) & 7;
+	if (irq == 2) {
+		/*
+		 * Interrupt is cascaded so perform interrupt
+		 * acknowledge on controller 2.
+		 */
+		outb(0x0C, 0xA0);		/* prepare for poll */
+		irq = (inb(0xA0) & 7) + 8;
+	}
+
+	if (unlikely(irq == 7)) {
+		/*
+		 * This may be a spurious interrupt.
+		 *
+		 * Read the interrupt status register (ISR). If the most
+		 * significant bit is not set then there is no valid
+		 * interrupt.
+		 */
+		outb(0x0B, 0x20);		/* ISR register */
+		if(~inb(0x20) & 0x80)
+			irq = -1;
+	}
+
+	spin_unlock(&i8259A_lock);
+
+	return irq;
+}
+
+#endif /* _ASM_I8259_H */
diff --git a/include/asm-mips/ide.h b/include/asm-mips/ide.h
new file mode 100644
index 000000000000..bb674c3b0303
--- /dev/null
+++ b/include/asm-mips/ide.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains the MIPS architecture specific IDE code.
+ */
+#ifndef __ASM_IDE_H
+#define __ASM_IDE_H
+
+#include <ide.h>
+
+#endif /* __ASM_IDE_H */
diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h
new file mode 100644
index 000000000000..6ad517241768
--- /dev/null
+++ b/include/asm-mips/inst.h
@@ -0,0 +1,371 @@
+/*
+ * Format of an instruction in memory.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_INST_H
+#define _ASM_INST_H
+
+/*
+ * Major opcodes; before MIPS IV cop1x was called cop3.
+ */
+enum major_op {
+	spec_op, bcond_op, j_op, jal_op,
+	beq_op, bne_op, blez_op, bgtz_op,
+	addi_op, addiu_op, slti_op, sltiu_op,
+	andi_op, ori_op, xori_op, lui_op,
+	cop0_op, cop1_op, cop2_op, cop1x_op,
+	beql_op, bnel_op, blezl_op, bgtzl_op,
+	daddi_op, daddiu_op, ldl_op, ldr_op,
+	major_1c_op, jalx_op, major_1e_op, major_1f_op,
+	lb_op, lh_op, lwl_op, lw_op,
+	lbu_op, lhu_op, lwr_op, lwu_op,
+	sb_op, sh_op, swl_op, sw_op,
+	sdl_op, sdr_op, swr_op, cache_op,
+	ll_op, lwc1_op, lwc2_op, pref_op,
+	lld_op, ldc1_op, ldc2_op, ld_op,
+	sc_op, swc1_op, swc2_op, major_3b_op, /* Opcode 0x3b is unused */
+	scd_op, sdc1_op, sdc2_op, sd_op
+};
+
+/*
+ * func field of spec opcode.
+ */
+enum spec_op {
+	sll_op, movc_op, srl_op, sra_op,
+	sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */
+	jr_op, jalr_op, movz_op, movn_op,
+	syscall_op, break_op, spim_op, sync_op,
+	mfhi_op, mthi_op, mflo_op, mtlo_op,
+	dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
+	mult_op, multu_op, div_op, divu_op,
+	dmult_op, dmultu_op, ddiv_op, ddivu_op,
+	add_op, addu_op, sub_op, subu_op,
+	and_op, or_op, xor_op, nor_op,
+	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
+	dadd_op, daddu_op, dsub_op, dsubu_op,
+	tge_op, tgeu_op, tlt_op, tltu_op,
+	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
+	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
+	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+};
+
+/*
+ * rt field of bcond opcodes.
+ */
+enum rt_op {
+	bltz_op, bgez_op, bltzl_op, bgezl_op,
+	spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
+	tgei_op, tgeiu_op, tlti_op, tltiu_op,
+	teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
+	bltzal_op, bgezal_op, bltzall_op, bgezall_op
+	/*
+	 * The others (0x14 - 0x1f) are unused.
+ 	 */
+};
+
+/*
+ * rs field of cop opcodes.
+ */
+enum cop_op {
+	mfc_op        = 0x00, dmfc_op       = 0x01,
+	cfc_op        = 0x02, mtc_op        = 0x04,
+	dmtc_op       = 0x05, ctc_op        = 0x06,
+	bc_op         = 0x08, cop_op        = 0x10,
+	copm_op       = 0x18
+};
+
+/*
+ * rt field of cop.bc_op opcodes
+ */
+enum bcop_op {
+	bcf_op, bct_op, bcfl_op, bctl_op
+};
+
+/*
+ * func field of cop0 coi opcodes.
+ */
+enum cop0_coi_func {
+	tlbr_op       = 0x01, tlbwi_op      = 0x02,
+	tlbwr_op      = 0x06, tlbp_op       = 0x08,
+	rfe_op        = 0x10, eret_op       = 0x18
+};
+
+/*
+ * func field of cop0 com opcodes.
+ */
+enum cop0_com_func {
+	tlbr1_op      = 0x01, tlbw_op       = 0x02,
+	tlbp1_op      = 0x08, dctr_op       = 0x09,
+	dctw_op       = 0x0a
+};
+
+/*
+ * fmt field of cop1 opcodes.
+ */
+enum cop1_fmt {
+	s_fmt, d_fmt, e_fmt, q_fmt,
+	w_fmt, l_fmt
+};
+
+/*
+ * func field of cop1 instructions using d, s or w format.
+ */
+enum cop1_sdw_func {
+	fadd_op      =  0x00, fsub_op      =  0x01,
+	fmul_op      =  0x02, fdiv_op      =  0x03,
+	fsqrt_op     =  0x04, fabs_op      =  0x05,
+	fmov_op      =  0x06, fneg_op      =  0x07,
+	froundl_op   =  0x08, ftruncl_op   =  0x09,
+	fceill_op    =  0x0a, ffloorl_op   =  0x0b,
+	fround_op    =  0x0c, ftrunc_op    =  0x0d,
+	fceil_op     =  0x0e, ffloor_op    =  0x0f,
+	fmovc_op     =  0x11, fmovz_op     =  0x12,
+	fmovn_op     =  0x13, frecip_op    =  0x15,
+	frsqrt_op    =  0x16, fcvts_op     =  0x20,
+	fcvtd_op     =  0x21, fcvte_op     =  0x22,
+	fcvtw_op     =  0x24, fcvtl_op     =  0x25,
+	fcmp_op      =  0x30
+};
+
+/*
+ * func field of cop1x opcodes (MIPS IV).
+ */
+enum cop1x_func {
+	lwxc1_op     =  0x00, ldxc1_op     =  0x01,
+	pfetch_op    =  0x07, swxc1_op     =  0x08,
+	sdxc1_op     =  0x09, madd_s_op    =  0x20,
+	madd_d_op    =  0x21, madd_e_op    =  0x22,
+	msub_s_op    =  0x28, msub_d_op    =  0x29,
+	msub_e_op    =  0x2a, nmadd_s_op   =  0x30,
+	nmadd_d_op   =  0x31, nmadd_e_op   =  0x32,
+	nmsub_s_op   =  0x38, nmsub_d_op   =  0x39,
+	nmsub_e_op   =  0x3a
+};
+
+/*
+ * func field for mad opcodes (MIPS IV).
+ */
+enum mad_func {
+	madd_op      = 0x08, msub_op      = 0x0a,
+	nmadd_op     = 0x0c, nmsub_op     = 0x0e
+};
+
+/*
+ * Damn ...  bitfields depend from byteorder :-(
+ */
+#ifdef __MIPSEB__
+struct j_format {	/* Jump format */
+	unsigned int opcode : 6;
+	unsigned int target : 26;
+};
+
+struct i_format {	/* Immediate format (addi, lw, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	signed int simmediate : 16;
+};
+
+struct u_format {	/* Unsigned immediate format (ori, xori, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int uimmediate : 16;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int c_op : 3;
+	unsigned int cache : 2;
+	unsigned int simmediate : 16;
+};
+
+struct r_format {	/* Register format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int opcode : 6;
+	unsigned int : 1;
+	unsigned int fmt : 4;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int opcode : 6;
+	unsigned int fr : 5;
+	unsigned int ft : 5;
+	unsigned int fs : 5;
+	unsigned int fd : 5;
+	unsigned int func : 4;
+	unsigned int fmt : 2;
+};
+
+#elif defined(__MIPSEL__)
+
+struct j_format {	/* Jump format */
+	unsigned int target : 26;
+	unsigned int opcode : 6;
+};
+
+struct i_format {	/* Immediate format */
+	signed int simmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct u_format {	/* Unsigned immediate format */
+	unsigned int uimmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int simmediate : 16;
+	unsigned int cache : 2;
+	unsigned int c_op : 3;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct r_format {	/* Register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int fmt : 4;
+	unsigned int : 1;
+	unsigned int opcode : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int fmt : 2;
+	unsigned int func : 4;
+	unsigned int fd : 5;
+	unsigned int fs : 5;
+	unsigned int ft : 5;
+	unsigned int fr : 5;
+	unsigned int opcode : 6;
+};
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+union mips_instruction {
+	unsigned int word;
+	unsigned short halfword[2];
+	unsigned char byte[4];
+	struct j_format j_format;
+	struct i_format i_format;
+	struct u_format u_format;
+	struct c_format c_format;
+	struct r_format r_format;
+	struct f_format f_format;
+        struct ma_format ma_format;
+};
+
+/* HACHACHAHCAHC ...  */
+
+/* In case some other massaging is needed, keep MIPSInst as wrapper */
+
+#define MIPSInst(x) x
+
+#define I_OPCODE_SFT	26
+#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT)
+
+#define I_JTARGET_SFT	0
+#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff)
+
+#define I_RS_SFT	21
+#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT)
+
+#define I_RT_SFT	16
+#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT)
+
+#define I_IMM_SFT	0
+#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff)))
+#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff)
+
+#define I_CACHEOP_SFT	18
+#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT)
+
+#define I_CACHESEL_SFT	16
+#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT)
+
+#define I_RD_SFT	11
+#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT)
+
+#define I_RE_SFT	6
+#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT)
+
+#define I_FUNC_SFT	0
+#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
+
+#define I_FFMT_SFT	21
+#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT)
+
+#define I_FT_SFT	16
+#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT)
+
+#define I_FS_SFT	11
+#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT)
+
+#define I_FD_SFT	6
+#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT)
+
+#define I_FR_SFT	21
+#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT)
+
+#define I_FMA_FUNC_SFT	2
+#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT)
+
+#define I_FMA_FFMT_SFT	0
+#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003)
+
+typedef unsigned int mips_instruction;
+
+#endif /* _ASM_INST_H */
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
new file mode 100644
index 000000000000..e8357f5379fa
--- /dev/null
+++ b/include/asm-mips/interrupt.h
@@ -0,0 +1,134 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_INTERRUPT_H
+#define _ASM_INTERRUPT_H
+
+#include <asm/hazards.h>
+
+__asm__ (
+	".macro\tlocal_irq_enable\n\t"
+	".set\tpush\n\t"
+	".set\treorder\n\t"
+	".set\tnoat\n\t"
+	"mfc0\t$1,$12\n\t"
+	"ori\t$1,0x1f\n\t"
+	"xori\t$1,0x1e\n\t"
+	"mtc0\t$1,$12\n\t"
+	"irq_enable_hazard\n\t"
+	".set\tpop\n\t"
+	".endm");
+
+static inline void local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"local_irq_enable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+__asm__ (
+	".macro\tlocal_irq_disable\n\t"
+	".set\tpush\n\t"
+	".set\tnoat\n\t"
+	"mfc0\t$1,$12\n\t"
+	"ori\t$1,1\n\t"
+	"xori\t$1,1\n\t"
+	".set\tnoreorder\n\t"
+	"mtc0\t$1,$12\n\t"
+	"irq_disable_hazard\n\t"
+	".set\tpop\n\t"
+	".endm");
+
+static inline void local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+__asm__ (
+	".macro\tlocal_save_flags flags\n\t"
+	".set\tpush\n\t"
+	".set\treorder\n\t"
+	"mfc0\t\\flags, $12\n\t"
+	".set\tpop\n\t"
+	".endm");
+
+#define local_save_flags(x)						\
+__asm__ __volatile__(							\
+	"local_save_flags %0"						\
+	: "=r" (x))
+
+__asm__ (
+	".macro\tlocal_irq_save result\n\t"
+	".set\tpush\n\t"
+	".set\treorder\n\t"
+	".set\tnoat\n\t"
+	"mfc0\t\\result, $12\n\t"
+	"ori\t$1, \\result, 1\n\t"
+	"xori\t$1, 1\n\t"
+	".set\tnoreorder\n\t"
+	"mtc0\t$1, $12\n\t"
+	"irq_disable_hazard\n\t"
+	".set\tpop\n\t"
+	".endm");
+
+#define local_irq_save(x)						\
+__asm__ __volatile__(							\
+	"local_irq_save\t%0"						\
+	: "=r" (x)							\
+	: /* no inputs */						\
+	: "memory")
+
+__asm__ (
+	".macro\tlocal_irq_restore flags\n\t"
+	".set\tnoreorder\n\t"
+	".set\tnoat\n\t"
+	"mfc0\t$1, $12\n\t"
+	"andi\t\\flags, 1\n\t"
+	"ori\t$1, 1\n\t"
+	"xori\t$1, 1\n\t"
+	"or\t\\flags, $1\n\t"
+	"mtc0\t\\flags, $12\n\t"
+	"irq_disable_hazard\n\t"
+	".set\tat\n\t"
+	".set\treorder\n\t"
+	".endm");
+
+#define local_irq_restore(flags)					\
+do {									\
+	unsigned long __tmp1;						\
+									\
+	__asm__ __volatile__(						\
+		"local_irq_restore\t%0"					\
+		: "=r" (__tmp1)						\
+		: "0" (flags)						\
+		: "memory");						\
+} while(0)
+
+#define irqs_disabled()							\
+({									\
+	unsigned long flags;						\
+	local_save_flags(flags);					\
+	!(flags & 1);							\
+})
+
+#endif /* _ASM_INTERRUPT_H */
diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h
new file mode 100644
index 000000000000..4cd36fe98173
--- /dev/null
+++ b/include/asm-mips/inventory.h
@@ -0,0 +1,20 @@
+/*
+ * Miguel de Icaza
+ */
+#ifndef __ASM_INVENTORY_H
+#define __ASM_INVENTORY_H
+
+typedef struct inventory_s {
+	struct inventory_s *inv_next;
+	int    inv_class;
+	int    inv_type;
+	int    inv_controller;
+	int    inv_unit;
+	int    inv_state;
+} inventory_t;
+
+extern int inventory_items;
+void add_to_inventory (int class, int type, int controller, int unit, int state);
+int dump_inventory_to_user (void *userbuf, int size);
+
+#endif /* __ASM_INVENTORY_H */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
new file mode 100644
index 000000000000..039845f2e6b0
--- /dev/null
+++ b/include/asm-mips/io.h
@@ -0,0 +1,630 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf GmbH
+ * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	Maciej W. Rozycki <macro@mips.com>
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/processor.h>
+
+#include <mangle-port.h>
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * Raw operations are never swapped in software.  Otoh values that raw
+ * operations are working on may or may not have been swapped by the bus
+ * hardware.  An example use would be for flash memory that's used for
+ * execute in place.
+ */
+# define __raw_ioswabb(x)	(x)
+# define __raw_ioswabw(x)	(x)
+# define __raw_ioswabl(x)	(x)
+# define __raw_ioswabq(x)	(x)
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(x)		(x)
+# ifdef CONFIG_SGI_IP22
+/*
+ * IP22 seems braindead enough to swap 16bits values in hardware, but
+ * not 32bits.  Go figure... Can't tell without documentation.
+ */
+#  define ioswabw(x)		(x)
+# else
+#  define ioswabw(x)		le16_to_cpu(x)
+# endif
+# define ioswabl(x)		le32_to_cpu(x)
+# define ioswabq(x)		le64_to_cpu(x)
+
+#else
+
+# define ioswabb(x)		(x)
+# define ioswabw(x)		(x)
+# define ioswabl(x)		(x)
+# define ioswabq(x)		(x)
+
+#endif
+
+/*
+ * Native bus accesses never swapped.
+ */
+#define bus_ioswabb(x)		(x)
+#define bus_ioswabw(x)		(x)
+#define bus_ioswabl(x)		(x)
+#define bus_ioswabq(x)		(x)
+
+#define __bus_ioswabq		bus_ioswabq
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * On MIPS I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. mips_io_port_base is the virtual address to
+ * which all ports are being mapped.  For sake of efficiency some code
+ * assumes that this is an address that can be loaded with a single lui
+ * instruction, so the lower 16 bits must be zero.  Should be true on
+ * on any sane architecture; generic code does not use this assumption.
+ */
+extern const unsigned long mips_io_port_base;
+
+#define set_io_port_base(base)	\
+	do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ *
+ */
+
+#define __SLOW_DOWN_IO \
+	__asm__ __volatile__( \
+		"sb\t$0,0x80(%0)" \
+		: : "r" (mips_io_port_base));
+
+#ifdef CONF_SLOWDOWN_IO
+#ifdef REALLY_SLOW_IO
+#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+#else
+#define SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+#else
+#define SLOW_DOWN_IO
+#endif
+
+/*
+ *     virt_to_phys    -       map virtual addresses to physical
+ *     @address: address to remap
+ *
+ *     The returned physical address is the physical (CPU) mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses directly mapped or allocated via kmalloc.
+ *
+ *     This function does not give bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return (unsigned long)address - PAGE_OFFSET;
+}
+
+/*
+ *     phys_to_virt    -       map physical address to virtual
+ *     @address: address to remap
+ *
+ *     The returned virtual address is a current CPU mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses that have a kernel mapping
+ *
+ *     This function does not handle bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET);
+}
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+static inline unsigned long isa_virt_to_bus(volatile void * address)
+{
+	return (unsigned long)address - PAGE_OFFSET;
+}
+
+static inline void * isa_bus_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET);
+}
+
+#define isa_page_to_bus page_to_phys
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them for x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
+ * for the processor.  This implies the assumption that there is only
+ * one of these busses.
+ */
+extern unsigned long isa_slot_offset;
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iounmap(volatile void __iomem *addr);
+
+static inline void * __ioremap_mode(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	if (cpu_has_64bit_addresses) {
+		u64 base = UNCAC_BASE;
+
+		/*
+		 * R10000 supports a 2 bit uncached attribute therefore
+		 * UNCAC_BASE may not equal IO_BASE.
+		 */
+		if (flags == _CACHE_UNCACHED)
+			base = (u64) IO_BASE;
+		return (void *) (unsigned long) (base + offset);
+	}
+
+	return __ioremap(offset, size, flags);
+}
+
+/*
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+#define ioremap(offset, size)						\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_nocache     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In paticular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ */
+#define ioremap_nocache(offset, size)					\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
+ * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * mapping using the uncached accelerated mode which isn't supported on
+ * all processors.
+ */
+#define ioremap_cacheable_cow(offset, size)				\
+	__ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+#define ioremap_uncached_accelerated(offset, size)			\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+	if (cpu_has_64bit_addresses)
+		return;
+
+	__iounmap(addr);
+}
+
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
+									\
+static inline void pfx##write##bwlq(type val,				\
+				    volatile void __iomem *mem)		\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	__val = pfx##ioswab##bwlq(val);					\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		*__mem = __val;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+		type __tmp;						\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __writeq""\n\t"	\
+			"dsll32	%L0, %L0, 0"			"\n\t"	\
+			"dsrl32	%L0, %L0, 0"			"\n\t"	\
+			"dsll32	%M0, %M0, 0"			"\n\t"	\
+			"or	%L0, %L0, %M0"			"\n\t"	\
+			"sd	%L0, %2"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__tmp)					\
+			: "0" (__val), "m" (*__mem));			\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else								\
+		BUG();							\
+}									\
+									\
+static inline type pfx##read##bwlq(volatile void __iomem *mem)		\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		__val = *__mem;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+									\
+		local_irq_save(__flags);				\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			"ld	%L0, %1"			"\n\t"	\
+			"dsra32	%M0, %L0, 0"			"\n\t"	\
+			"sll	%L0, %L0, 0"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__val)					\
+			: "m" (*__mem));				\
+		local_irq_restore(__flags);				\
+	} else {							\
+		__val = 0;						\
+		BUG();							\
+	}								\
+									\
+	return pfx##ioswab##bwlq(__val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	port = __swizzle_addr_##bwlq(port);				\
+	__addr = (void *)(mips_io_port_base + port);			\
+									\
+	__val = pfx##ioswab##bwlq(val);					\
+									\
+	if (sizeof(type) != sizeof(u64)) {				\
+		*__addr = __val;					\
+		slow;							\
+	} else								\
+		BUILD_BUG();						\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	port = __swizzle_addr_##bwlq(port);				\
+	__addr = (void *)(mips_io_port_base + port);			\
+									\
+	if (sizeof(type) != sizeof(u64)) {				\
+		__val = *__addr;					\
+		slow;							\
+	} else {							\
+		__val = 0;						\
+		BUILD_BUG();						\
+	}								\
+									\
+	return pfx##ioswab##bwlq(__val);				\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwlq, type)				\
+									\
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+									\
+__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)				\
+__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO(bwlq, type)						\
+									\
+__BUILD_MEMORY_PFX(, bwlq, type)					\
+__BUILD_MEMORY_PFX(__raw_, bwlq, type)					\
+__BUILD_MEMORY_PFX(bus_, bwlq, type)					\
+__BUILD_IOPORT_PFX(, bwlq, type)					\
+__BUILD_IOPORT_PFX(__raw_, bwlq, type)
+
+#define __BUILDIO(bwlq, type)						\
+									\
+__BUILD_MEMORY_SINGLE(__bus_, bwlq, type, 0)
+
+BUILDIO(b, u8)
+BUILDIO(w, u16)
+BUILDIO(l, u32)
+BUILDIO(q, u64)
+
+__BUILDIO(q, u64)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+#define readq_relaxed			readq
+
+/*
+ * Some code tests for these symbols
+ */
+#define readq				readq
+#define writeq				writeq
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem, void *addr,	\
+				unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		__raw_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, void *addr,		\
+			      unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		__raw_out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+#define BUILDSTRING(bwlq, type)						\
+									\
+__BUILD_MEMORY_STRING(bwlq, type)					\
+__BUILD_IOPORT_STRING(bwlq, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+BUILDSTRING(q, u64)
+
+
+/* Depends on MIPS II instruction set */
+#define mmiowb() asm volatile ("sync" ::: "memory")
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+/*
+ * Memory Mapped I/O
+ */
+#define ioread8(addr)		readb(addr)
+#define ioread16(addr)		readw(addr)
+#define ioread32(addr)		readl(addr)
+
+#define iowrite8(b,addr)	writeb(b,addr)
+#define iowrite16(w,addr)	writew(w,addr)
+#define iowrite32(l,addr)	writel(l,addr)
+
+#define ioread8_rep(a,b,c)	readsb(a,b,c)
+#define ioread16_rep(a,b,c)	readsw(a,b,c)
+#define ioread32_rep(a,b,c)	readsl(a,b,c)
+
+#define iowrite8_rep(a,b,c)	writesb(a,b,c)
+#define iowrite16_rep(a,b,c)	writesw(a,b,c)
+#define iowrite32_rep(a,b,c)	writesl(a,b,c)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * ISA space is 'always mapped' on currently supported MIPS systems, no need
+ * to explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char *)(isa_slot_offset))
+
+#define isa_readb(a)		readb(__ISA_IO_base + (a))
+#define isa_readw(a)		readw(__ISA_IO_base + (a))
+#define isa_readl(a)		readl(__ISA_IO_base + (a))
+#define isa_readq(a)		readq(__ISA_IO_base + (a))
+#define isa_writeb(b,a)		writeb(b,__ISA_IO_base + (a))
+#define isa_writew(w,a)		writew(w,__ISA_IO_base + (a))
+#define isa_writel(l,a)		writel(l,__ISA_IO_base + (a))
+#define isa_writeq(q,a)		writeq(q,__ISA_IO_base + (a))
+#define isa_memset_io(a,b,c)	memset_io(__ISA_IO_base + (a),(b),(c))
+#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c))
+#define isa_memcpy_toio(a,b,c)	memcpy_toio(__ISA_IO_base + (a),(b),(c))
+
+/*
+ * We don't have csum_partial_copy_fromio() yet, so we cheat here and
+ * just copy it. The net code will then do the checksum later.
+ */
+#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len))
+#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d))
+
+/*
+ *     check_signature         -       find BIOS signatures
+ *     @io_addr: mmio address to check
+ *     @signature:  signature block
+ *     @length: length of signature
+ *
+ *     Perform a signature comparison with the mmio address io_addr. This
+ *     address should have been obtained by ioremap.
+ *     Returns 1 on a match.
+ */
+static inline int check_signature(char __iomem *io_addr,
+	const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_wback(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+
+extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+#define dma_cache_wback_inv(start, size)	_dma_cache_wback_inv(start,size)
+#define dma_cache_wback(start, size)		_dma_cache_wback(start,size)
+#define dma_cache_inv(start, size)		_dma_cache_inv(start,size)
+
+#else /* Sane hardware */
+
+#define dma_cache_wback_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_wback(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+
+#endif /* CONFIG_DMA_NONCOHERENT */
+
+/*
+ * Read a 32-bit register that requires a 64-bit read cycle on the bus.
+ * Avoid interrupt mucking, just adjust the address for 4-byte access.
+ * Assume the addresses are 8-byte aligned.
+ */
+#ifdef __MIPSEB__
+#define __CSR_32_ADJUST 4
+#else
+#define __CSR_32_ADJUST 0
+#endif
+
+#define csr_out32(v,a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
+#define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* _ASM_IO_H */
diff --git a/include/asm-mips/ioctl.h b/include/asm-mips/ioctl.h
new file mode 100644
index 000000000000..cba641a6ce09
--- /dev/null
+++ b/include/asm-mips/ioctl.h
@@ -0,0 +1,99 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle
+ */
+#ifndef _ASM_IOCTL_H
+#define _ASM_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned.  Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ *
+ * The same applies for for the MIPS ABI; in fact even the macros
+ * from Linux/Alpha fit almost perfectly.
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * We to additionally limit parameters to a maximum 255 bytes.
+ */
+#define _IOC_SLMASK	0xff
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+/*
+ * The following are included for compatibility
+ */
+#define _IOC_VOID	0x20000000
+#define _IOC_OUT	0x40000000
+#define _IOC_IN		0x80000000
+#define _IOC_INOUT	(IOC_IN|IOC_OUT)
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IOCTL_H */
diff --git a/include/asm-mips/ioctls.h b/include/asm-mips/ioctls.h
new file mode 100644
index 000000000000..92f6c36aac4d
--- /dev/null
+++ b/include/asm-mips/ioctls.h
@@ -0,0 +1,105 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2001 Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_IOCTLS_H
+#define __ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define TCGETA		0x5401
+#define TCSETA		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETAW		0x5403
+#define TCSETAF		0x5404
+
+#define TCSBRK		0x5405
+#define TCXONC		0x5406
+#define TCFLSH		0x5407
+
+#define TCGETS		0x540d
+#define TCSETS		0x540e
+#define TCSETSW		0x540f
+#define TCSETSF		0x5410
+
+#define TIOCEXCL	0x740d		/* set exclusive use of tty */
+#define TIOCNXCL	0x740e		/* reset exclusive use of tty */
+#define TIOCOUTQ	0x7472		/* output queue size */
+#define TIOCSTI		0x5472		/* simulate terminal input */
+#define TIOCMGET	0x741d		/* get all modem bits */
+#define TIOCMBIS	0x741b		/* bis modem bits */
+#define TIOCMBIC	0x741c		/* bic modem bits */
+#define TIOCMSET	0x741a		/* set all modem bits */
+#define TIOCPKT		0x5470		/* pty: set/clear packet mode */
+#define	 TIOCPKT_DATA		0x00	/* data packet */
+#define	 TIOCPKT_FLUSHREAD	0x01	/* flush packet */
+#define	 TIOCPKT_FLUSHWRITE	0x02	/* flush packet */
+#define	 TIOCPKT_STOP		0x04	/* stop output */
+#define	 TIOCPKT_START		0x08	/* start output */
+#define	 TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
+#define	 TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
+/* #define  TIOCPKT_IOCTL		0x40	state change of pty driver */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
+#define TIOCNOTTY	0x5471		/* void tty association */
+#define TIOCSETD	0x7401
+#define TIOCGETD	0x7400
+
+#define FIOCLEX		0x6601
+#define FIONCLEX	0x6602
+#define FIOASYNC	0x667d
+#define FIONBIO		0x667e
+#define FIOQSIZE	0x667f
+
+#define TIOCGLTC	0x7474			/* get special local chars */
+#define TIOCSLTC	0x7475			/* set special local chars */
+#define TIOCSPGRP	_IOW('t', 118, int)	/* set pgrp of tty */
+#define TIOCGPGRP	_IOR('t', 119, int)	/* get pgrp of tty */
+#define TIOCCONS	_IOW('t', 120, int)	/* become virtual console */
+
+#define FIONREAD	0x467f
+#define TIOCINQ		FIONREAD
+
+#define TIOCGETP        0x7408
+#define TIOCSETP        0x7409
+#define TIOCSETN        0x740a			/* TIOCSETP wo flush */
+
+/* #define TIOCSETA	_IOW('t', 20, struct termios) set termios struct */
+/* #define TIOCSETAW	_IOW('t', 21, struct termios) drain output, set */
+/* #define TIOCSETAF	_IOW('t', 22, struct termios) drn out, fls in, set */
+/* #define TIOCGETD	_IOR('t', 26, int)	get line discipline */
+/* #define TIOCSETD	_IOW('t', 27, int)	set line discipline */
+						/* 127-124 compat */
+
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x7416  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+/* I hope the range from 0x5480 on is free ... */
+#define TIOCSCTTY	0x5480		/* become controlling tty */
+#define TIOCGSOFTCAR	0x5481
+#define TIOCSSOFTCAR	0x5482
+#define TIOCLINUX	0x5483
+#define TIOCGSERIAL	0x5484
+#define TIOCSSERIAL	0x5485
+#define TCSBRKP		0x5486	/* Needed for POSIX tcsendbreak() */
+#define TIOCSERCONFIG	0x5488
+#define TIOCSERGWILD	0x5489
+#define TIOCSERSWILD	0x548a
+#define TIOCGLCKTRMIOS	0x548b
+#define TIOCSLCKTRMIOS	0x548c
+#define TIOCSERGSTRUCT	0x548d /* For debugging only */
+#define TIOCSERGETLSR   0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config  */
+#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
+#define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP	0x5493 /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP	0x5494 /* Set Hayes ESP configuration */
+
+#endif /* __ASM_IOCTLS_H */
diff --git a/include/asm-mips/ip32/crime.h b/include/asm-mips/ip32/crime.h
new file mode 100644
index 000000000000..152879bae20f
--- /dev/null
+++ b/include/asm-mips/ip32/crime.h
@@ -0,0 +1,161 @@
+/*
+ * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory
+ * Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_CRIME_H__
+#define __ASM_CRIME_H__
+
+/*
+ * Address map
+ */
+#define CRIME_BASE	0x14000000	/* physical */
+
+#undef BIT
+#define BIT(x)	(1UL << (x))
+
+struct sgi_crime {
+	volatile unsigned long id;
+#define CRIME_ID_MASK			0xff
+#define CRIME_ID_IDBITS			0xf0
+#define CRIME_ID_IDVALUE		0xa0
+#define CRIME_ID_REV			0x0f
+#define CRIME_REV_PETTY			0x00
+#define CRIME_REV_11			0x11
+#define CRIME_REV_13			0x13
+#define CRIME_REV_14			0x14
+
+	volatile unsigned long control;
+#define CRIME_CONTROL_MASK		0x3fff
+#define CRIME_CONTROL_TRITON_SYSADC	0x2000
+#define CRIME_CONTROL_CRIME_SYSADC	0x1000
+#define CRIME_CONTROL_HARD_RESET	0x0800
+#define CRIME_CONTROL_SOFT_RESET	0x0400
+#define CRIME_CONTROL_DOG_ENA		0x0200
+#define CRIME_CONTROL_ENDIANESS		0x0100
+#define CRIME_CONTROL_ENDIAN_BIG	0x0100
+#define CRIME_CONTROL_ENDIAN_LITTLE	0x0000
+#define CRIME_CONTROL_CQUEUE_HWM	0x000f
+#define CRIME_CONTROL_CQUEUE_SHFT	0
+#define CRIME_CONTROL_WBUF_HWM		0x00f0
+#define CRIME_CONTROL_WBUF_SHFT		8
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+	volatile unsigned long soft_int;
+	volatile unsigned long hard_int;
+#define MACE_VID_IN1_INT		BIT(0)
+#define MACE_VID_IN2_INT		BIT(1)
+#define MACE_VID_OUT_INT		BIT(2)
+#define MACE_ETHERNET_INT		BIT(3)
+#define MACE_SUPERIO_INT		BIT(4)
+#define MACE_MISC_INT			BIT(5)
+#define MACE_AUDIO_INT			BIT(6)
+#define MACE_PCI_BRIDGE_INT		BIT(7)
+#define MACEPCI_SCSI0_INT		BIT(8)
+#define MACEPCI_SCSI1_INT		BIT(9)
+#define MACEPCI_SLOT0_INT		BIT(10)
+#define MACEPCI_SLOT1_INT		BIT(11)
+#define MACEPCI_SLOT2_INT		BIT(12)
+#define MACEPCI_SHARED0_INT		BIT(13)
+#define MACEPCI_SHARED1_INT		BIT(14)
+#define MACEPCI_SHARED2_INT		BIT(15)
+#define CRIME_GBE0_INT			BIT(16)
+#define CRIME_GBE1_INT			BIT(17)
+#define CRIME_GBE2_INT			BIT(18)
+#define CRIME_GBE3_INT			BIT(19)
+#define CRIME_CPUERR_INT		BIT(20)
+#define CRIME_MEMERR_INT		BIT(21)
+#define CRIME_RE_EMPTY_E_INT		BIT(22)
+#define CRIME_RE_FULL_E_INT		BIT(23)
+#define CRIME_RE_IDLE_E_INT		BIT(24)
+#define CRIME_RE_EMPTY_L_INT		BIT(25)
+#define CRIME_RE_FULL_L_INT		BIT(26)
+#define CRIME_RE_IDLE_L_INT    		BIT(27)
+#define CRIME_SOFT0_INT			BIT(28)
+#define CRIME_SOFT1_INT			BIT(29)
+#define CRIME_SOFT2_INT			BIT(30)
+#define CRIME_SYSCORERR_INT		CRIME_SOFT2_INT
+#define CRIME_VICE_INT			BIT(31)
+/* Masks for deciding who handles the interrupt */
+#define CRIME_MACE_INT_MASK		0x8f
+#define CRIME_MACEISA_INT_MASK		0x70
+#define CRIME_MACEPCI_INT_MASK		0xff00
+#define CRIME_CRIME_INT_MASK		0xffff0000
+
+	volatile unsigned long watchdog;
+#define CRIME_DOG_POWER_ON_RESET	0x00010000
+#define CRIME_DOG_WARM_RESET		0x00080000
+#define CRIME_DOG_TIMEOUT		(CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET)
+#define CRIME_DOG_VALUE			0x00007fff
+
+	volatile unsigned long timer;
+#define CRIME_MASTER_FREQ		66666500	/* Crime upcounter frequency */
+#define CRIME_NS_PER_TICK		15		/* for delay_calibrate */
+
+	volatile unsigned long cpu_error_addr;
+#define CRIME_CPU_ERROR_ADDR_MASK	0x3ffffffff
+
+	volatile unsigned long cpu_error_stat;
+#define CRIME_CPU_ERROR_MASK		0x7		/* cpu error stat is 3 bits */
+#define CRIME_CPU_ERROR_CPU_ILL_ADDR	0x4
+#define CRIME_CPU_ERROR_VICE_WRT_PRTY	0x2
+#define CRIME_CPU_ERROR_CPU_WRT_PRTY	0x1
+
+	unsigned long _pad0[54];
+
+	volatile unsigned long mc_ctrl;
+	volatile unsigned long bank_ctrl[8];
+#define CRIME_MEM_BANK_CONTROL_MASK		0x11f	/* 9 bits 7:5 reserved */
+#define CRIME_MEM_BANK_CONTROL_ADDR		0x01f
+#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE	0x100
+#define CRIME_MAXBANKS				8
+
+	volatile unsigned long mem_ref_counter;
+#define CRIME_MEM_REF_COUNTER_MASK	0x3ff		/* 10bit */
+
+	volatile unsigned long mem_error_stat;
+#define CRIME_MEM_ERROR_STAT_MASK       0x0ff7ffff	/* 28-bit register */
+#define CRIME_MEM_ERROR_MACE_ID		0x0000007f
+#define CRIME_MEM_ERROR_MACE_ACCESS	0x00000080
+#define CRIME_MEM_ERROR_RE_ID		0x00007f00
+#define CRIME_MEM_ERROR_RE_ACCESS	0x00008000
+#define CRIME_MEM_ERROR_GBE_ACCESS	0x00010000
+#define CRIME_MEM_ERROR_VICE_ACCESS	0x00020000
+#define CRIME_MEM_ERROR_CPU_ACCESS	0x00040000
+#define CRIME_MEM_ERROR_RESERVED	0x00080000
+#define CRIME_MEM_ERROR_SOFT_ERR	0x00100000
+#define CRIME_MEM_ERROR_HARD_ERR	0x00200000
+#define CRIME_MEM_ERROR_MULTIPLE	0x00400000
+#define CRIME_MEM_ERROR_ECC		0x01800000
+#define CRIME_MEM_ERROR_MEM_ECC_RD	0x00800000
+#define CRIME_MEM_ERROR_MEM_ECC_RMW	0x01000000
+#define CRIME_MEM_ERROR_INV		0x0e000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD	0x02000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR	0x04000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000
+
+	volatile unsigned long mem_error_addr;
+#define CRIME_MEM_ERROR_ADDR_MASK	0x3fffffff
+
+	volatile unsigned long mem_ecc_syn;
+#define CRIME_MEM_ERROR_ECC_SYN_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_chk;
+#define CRIME_MEM_ERROR_ECC_CHK_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_repl;
+#define CRIME_MEM_ERROR_ECC_REPL_MASK	0xffffffff
+};
+
+extern struct sgi_crime *crime;
+
+#define CRIME_HI_MEM_BASE	0x40000000	/* this is where whole 1G of RAM is mapped */
+
+#endif /* __ASM_CRIME_H__ */
diff --git a/include/asm-mips/ip32/ip32_ints.h b/include/asm-mips/ip32/ip32_ints.h
new file mode 100644
index 000000000000..c3c280e3d591
--- /dev/null
+++ b/include/asm-mips/ip32/ip32_ints.h
@@ -0,0 +1,94 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_IP32_INTS_H
+#define __ASM_IP32_INTS_H
+
+/*
+ * This list reflects the assignment of interrupt numbers to
+ * interrupting events.  Order is fairly irrelevant to handling
+ * priority.  This differs from irix.
+ */
+
+/* CPU */
+#define IP32_R4K_TIMER_IRQ		0
+
+/* MACE */
+#define MACE_VID_IN1_IRQ		1
+#define MACE_VID_IN2_IRQ		2
+#define MACE_VID_OUT_IRQ		3
+#define MACE_ETHERNET_IRQ		4
+/* SUPERIO, MISC, and AUDIO are MACEISA */
+#define MACE_PCI_BRIDGE_IRQ		8
+
+/* MACEPCI */
+#define MACEPCI_SCSI0_IRQ		9
+#define MACEPCI_SCSI1_IRQ		10
+#define MACEPCI_SLOT0_IRQ		11
+#define MACEPCI_SLOT1_IRQ		12
+#define MACEPCI_SLOT2_IRQ		13
+#define MACEPCI_SHARED0_IRQ		14
+#define MACEPCI_SHARED1_IRQ		15
+#define MACEPCI_SHARED2_IRQ		16
+
+/* CRIME */
+#define CRIME_GBE0_IRQ			17
+#define CRIME_GBE1_IRQ			18
+#define CRIME_GBE2_IRQ			19
+#define CRIME_GBE3_IRQ			20
+#define CRIME_CPUERR_IRQ		21
+#define CRIME_MEMERR_IRQ		22
+#define CRIME_RE_EMPTY_E_IRQ		23
+#define CRIME_RE_FULL_E_IRQ		24
+#define CRIME_RE_IDLE_E_IRQ		25
+#define CRIME_RE_EMPTY_L_IRQ		26
+#define CRIME_RE_FULL_L_IRQ		27
+#define CRIME_RE_IDLE_L_IRQ		28
+#define CRIME_SOFT0_IRQ			29
+#define CRIME_SOFT1_IRQ			30
+#define CRIME_SOFT2_IRQ			31
+#define CRIME_SYSCORERR_IRQ		CRIME_SOFT2_IRQ
+#define CRIME_VICE_IRQ			32
+
+/* MACEISA */
+#define MACEISA_AUDIO_SW_IRQ		33
+#define MACEISA_AUDIO_SC_IRQ		34
+#define MACEISA_AUDIO1_DMAT_IRQ		35
+#define MACEISA_AUDIO1_OF_IRQ		36
+#define MACEISA_AUDIO2_DMAT_IRQ		37
+#define MACEISA_AUDIO2_MERR_IRQ		38
+#define MACEISA_AUDIO3_DMAT_IRQ		39
+#define MACEISA_AUDIO3_MERR_IRQ		40
+#define MACEISA_RTC_IRQ			41
+#define MACEISA_KEYB_IRQ		42
+/* MACEISA_KEYB_POLL is not an IRQ */
+#define MACEISA_MOUSE_IRQ		44
+/* MACEISA_MOUSE_POLL is not an IRQ */
+#define MACEISA_TIMER0_IRQ		46
+#define MACEISA_TIMER1_IRQ		47
+#define MACEISA_TIMER2_IRQ		48
+#define MACEISA_PARALLEL_IRQ		49
+#define MACEISA_PAR_CTXA_IRQ		50
+#define MACEISA_PAR_CTXB_IRQ		51
+#define MACEISA_PAR_MERR_IRQ		52
+#define MACEISA_SERIAL1_IRQ		53
+#define MACEISA_SERIAL1_TDMAT_IRQ	54
+#define MACEISA_SERIAL1_TDMAPR_IRQ	55
+#define MACEISA_SERIAL1_TDMAME_IRQ	56
+#define MACEISA_SERIAL1_RDMAT_IRQ	57
+#define MACEISA_SERIAL1_RDMAOR_IRQ	58
+#define MACEISA_SERIAL2_IRQ		59
+#define MACEISA_SERIAL2_TDMAT_IRQ	60
+#define MACEISA_SERIAL2_TDMAPR_IRQ	61
+#define MACEISA_SERIAL2_TDMAME_IRQ	62
+#define MACEISA_SERIAL2_RDMAT_IRQ	63
+#define MACEISA_SERIAL2_RDMAOR_IRQ	64
+
+#define IP32_IRQ_MAX			MACEISA_SERIAL2_RDMAOR_IRQ
+
+#endif /* __ASM_IP32_INTS_H */
diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h
new file mode 100644
index 000000000000..2b7b0fdeac19
--- /dev/null
+++ b/include/asm-mips/ip32/mace.h
@@ -0,0 +1,334 @@
+/*
+ * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2004 Ladislav Michl
+ */
+
+#ifndef __ASM_MACE_H__
+#define __ASM_MACE_H__
+
+/*
+ * Address map
+ */
+#define MACE_BASE	0x1f000000	/* physical */
+
+#undef BIT
+#define BIT(x) (1UL << (x))
+
+/*
+ * PCI interface
+ */
+struct mace_pci {
+	volatile unsigned int error_addr;
+	volatile unsigned int error;
+#define MACEPCI_ERROR_MASTER_ABORT		BIT(31)
+#define MACEPCI_ERROR_TARGET_ABORT		BIT(30)
+#define MACEPCI_ERROR_DATA_PARITY_ERR		BIT(29)
+#define MACEPCI_ERROR_RETRY_ERR			BIT(28)
+#define MACEPCI_ERROR_ILLEGAL_CMD		BIT(27)
+#define MACEPCI_ERROR_SYSTEM_ERR		BIT(26)
+#define MACEPCI_ERROR_INTERRUPT_TEST		BIT(25)
+#define MACEPCI_ERROR_PARITY_ERR		BIT(24)
+#define MACEPCI_ERROR_OVERRUN			BIT(23)
+#define MACEPCI_ERROR_RSVD			BIT(22)
+#define MACEPCI_ERROR_MEMORY_ADDR		BIT(21)
+#define MACEPCI_ERROR_CONFIG_ADDR		BIT(20)
+#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID	BIT(19)
+#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID	BIT(18)
+#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID	BIT(17)
+#define MACEPCI_ERROR_RETRY_ADDR_VALID		BIT(16)
+#define MACEPCI_ERROR_SIG_TABORT		BIT(4)
+#define MACEPCI_ERROR_DEVSEL_MASK		0xc0
+#define MACEPCI_ERROR_DEVSEL_FAST		0
+#define MACEPCI_ERROR_DEVSEL_MED		0x40
+#define MACEPCI_ERROR_DEVSEL_SLOW		0x80
+#define MACEPCI_ERROR_FBB			BIT(1)
+#define MACEPCI_ERROR_66MHZ			BIT(0)
+	volatile unsigned int control;
+#define MACEPCI_CONTROL_INT(x)			BIT(x)
+#define MACEPCI_CONTROL_INT_MASK		0xff
+#define MACEPCI_CONTROL_SERR_ENA		BIT(8)
+#define MACEPCI_CONTROL_ARB_N6			BIT(9)
+#define MACEPCI_CONTROL_PARITY_ERR		BIT(10)
+#define MACEPCI_CONTROL_MRMRA_ENA		BIT(11)
+#define MACEPCI_CONTROL_ARB_N3			BIT(12)
+#define MACEPCI_CONTROL_ARB_N4			BIT(13)
+#define MACEPCI_CONTROL_ARB_N5			BIT(14)
+#define MACEPCI_CONTROL_PARK_LIU		BIT(15)
+#define MACEPCI_CONTROL_INV_INT(x)		BIT(16+x)
+#define MACEPCI_CONTROL_INV_INT_MASK		0x00ff0000
+#define MACEPCI_CONTROL_OVERRUN_INT		BIT(24)
+#define MACEPCI_CONTROL_PARITY_INT		BIT(25)
+#define MACEPCI_CONTROL_SERR_INT		BIT(26)
+#define MACEPCI_CONTROL_IT_INT			BIT(27)
+#define MACEPCI_CONTROL_RE_INT			BIT(28)
+#define MACEPCI_CONTROL_DPED_INT		BIT(29)
+#define MACEPCI_CONTROL_TAR_INT			BIT(30)
+#define MACEPCI_CONTROL_MAR_INT			BIT(31)
+	volatile unsigned int rev;
+	unsigned int _pad[0xcf8/4 - 4];
+	volatile unsigned int config_addr;
+	union {
+		volatile unsigned char b[4];
+		volatile unsigned short w[2];
+		volatile unsigned int l;
+	} config_data;
+};
+#define MACEPCI_LOW_MEMORY		0x1a000000
+#define MACEPCI_LOW_IO			0x18000000
+#define MACEPCI_SWAPPED_VIEW		0
+#define MACEPCI_NATIVE_VIEW		0x40000000
+#define MACEPCI_IO			0x80000000
+#define MACEPCI_HI_MEMORY		0x280000000
+#define MACEPCI_HI_IO			0x100000000
+
+/*
+ * Video interface
+ */
+struct mace_video {
+	unsigned long xxx;	/* later... */
+};
+
+/* 
+ * Ethernet interface
+ */
+struct mace_ethernet {
+	volatile unsigned long mac_ctrl;
+	volatile unsigned long int_stat;
+	volatile unsigned long dma_ctrl;
+	volatile unsigned long timer;
+	volatile unsigned long tx_int_al;
+	volatile unsigned long rx_int_al;
+	volatile unsigned long tx_info;
+	volatile unsigned long tx_info_al;
+	volatile unsigned long rx_buff;
+	volatile unsigned long rx_buff_al1;
+	volatile unsigned long rx_buff_al2;
+	volatile unsigned long diag;
+	volatile unsigned long phy_data;
+	volatile unsigned long phy_regs;
+	volatile unsigned long phy_trans_go;
+	volatile unsigned long backoff_seed;
+	/*===================================*/
+	volatile unsigned long imq_reserved[4];
+	volatile unsigned long mac_addr;
+	volatile unsigned long mac_addr2;
+	volatile unsigned long mcast_filter;
+	volatile unsigned long tx_ring_base;
+	/* Following are read-only registers for debugging */
+	volatile unsigned long tx_pkt1_hdr;
+	volatile unsigned long tx_pkt1_ptr[3];
+	volatile unsigned long tx_pkt2_hdr;
+	volatile unsigned long tx_pkt2_ptr[3];
+	/*===================================*/
+	volatile unsigned long rx_fifo;
+};
+
+/* 
+ * Peripherals
+ */
+
+/* Audio registers */
+struct mace_audio {
+	volatile unsigned long control;
+	volatile unsigned long codec_control;		/* codec status control */
+	volatile unsigned long codec_mask;		/* codec status input mask */
+	volatile unsigned long codec_read;		/* codec status read data */
+	struct {
+		volatile unsigned long control;		/* channel control */
+		volatile unsigned long read_ptr;	/* channel read pointer */
+		volatile unsigned long write_ptr;	/* channel write pointer */
+		volatile unsigned long depth;		/* channel depth */
+	} chan[3];
+};
+
+/* ISA Control and DMA registers */
+struct mace_isactrl {
+	volatile unsigned long ringbase;
+#define MACEISA_RINGBUFFERS_SIZE	(8 * 4096)
+
+	volatile unsigned long misc;
+#define MACEISA_FLASH_WE		BIT(0)	/* 1=> Enable FLASH writes */
+#define MACEISA_PWD_CLEAR		BIT(1)	/* 1=> PWD CLEAR jumper detected */
+#define MACEISA_NIC_DEASSERT		BIT(2)
+#define MACEISA_NIC_DATA		BIT(3)
+#define MACEISA_LED_RED			BIT(4)	/* 0=> Illuminate red LED */
+#define MACEISA_LED_GREEN		BIT(5)	/* 0=> Illuminate green LED */
+#define MACEISA_DP_RAM_ENABLE		BIT(6)
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+#define MACEISA_AUDIO_SW_INT		BIT(0)
+#define MACEISA_AUDIO_SC_INT		BIT(1)
+#define MACEISA_AUDIO1_DMAT_INT		BIT(2)
+#define MACEISA_AUDIO1_OF_INT		BIT(3)
+#define MACEISA_AUDIO2_DMAT_INT		BIT(4)
+#define MACEISA_AUDIO2_MERR_INT		BIT(5)
+#define MACEISA_AUDIO3_DMAT_INT		BIT(6)
+#define MACEISA_AUDIO3_MERR_INT		BIT(7)
+#define MACEISA_RTC_INT			BIT(8)
+#define MACEISA_KEYB_INT		BIT(9)
+#define MACEISA_KEYB_POLL_INT		BIT(10)
+#define MACEISA_MOUSE_INT		BIT(11)
+#define MACEISA_MOUSE_POLL_INT		BIT(12)
+#define MACEISA_TIMER0_INT		BIT(13)
+#define MACEISA_TIMER1_INT		BIT(14)
+#define MACEISA_TIMER2_INT		BIT(15)
+#define MACEISA_PARALLEL_INT		BIT(16)
+#define MACEISA_PAR_CTXA_INT		BIT(17)
+#define MACEISA_PAR_CTXB_INT		BIT(18)
+#define MACEISA_PAR_MERR_INT		BIT(19)
+#define MACEISA_SERIAL1_INT		BIT(20)
+#define MACEISA_SERIAL1_TDMAT_INT	BIT(21)
+#define MACEISA_SERIAL1_TDMAPR_INT	BIT(22)
+#define MACEISA_SERIAL1_TDMAME_INT	BIT(23)
+#define MACEISA_SERIAL1_RDMAT_INT	BIT(24)
+#define MACEISA_SERIAL1_RDMAOR_INT	BIT(25)
+#define MACEISA_SERIAL2_INT		BIT(26)
+#define MACEISA_SERIAL2_TDMAT_INT	BIT(27)
+#define MACEISA_SERIAL2_TDMAPR_INT	BIT(28)
+#define MACEISA_SERIAL2_TDMAME_INT	BIT(29)
+#define MACEISA_SERIAL2_RDMAT_INT	BIT(30)
+#define MACEISA_SERIAL2_RDMAOR_INT	BIT(31)
+
+	volatile unsigned long _pad[0x2000/8 - 4];
+
+	volatile unsigned long dp_ram[0x400];
+};
+
+/* Keyboard & Mouse registers
+ * -> drivers/input/serio/maceps2.c */
+struct mace_ps2port {
+	volatile unsigned long tx;
+	volatile unsigned long rx;
+	volatile unsigned long control;
+	volatile unsigned long status;
+};
+
+struct mace_ps2 {
+	struct mace_ps2port keyb;
+	struct mace_ps2port mouse;
+};
+
+/* I2C registers
+ * -> drivers/i2c/algos/i2c-algo-sgi.c */
+struct mace_i2c {
+	volatile unsigned long config;
+#define MACEI2C_RESET           BIT(0)
+#define MACEI2C_FAST            BIT(1)
+#define MACEI2C_DATA_OVERRIDE   BIT(2)
+#define MACEI2C_CLOCK_OVERRIDE  BIT(3)
+#define MACEI2C_DATA_STATUS     BIT(4)
+#define MACEI2C_CLOCK_STATUS    BIT(5)
+	volatile unsigned long control;
+	volatile unsigned long data;
+};
+
+/* Timer registers */
+typedef union {
+	volatile unsigned long ust_msc;
+	struct reg {
+		volatile unsigned int ust;
+		volatile unsigned int msc;
+	} reg;
+} timer_reg;
+
+struct mace_timers {
+	volatile unsigned long ust;
+#define MACE_UST_PERIOD_NS	960
+
+	volatile unsigned long compare1;
+	volatile unsigned long compare2;
+	volatile unsigned long compare3;
+
+	timer_reg audio_in;
+	timer_reg audio_out1;
+	timer_reg audio_out2;
+	timer_reg video_in1;
+	timer_reg video_in2;
+	timer_reg video_out;	
+};
+
+struct mace_perif {
+	struct mace_audio audio;
+	char _pad0[0x10000 - sizeof(struct mace_audio)];
+
+	struct mace_isactrl ctrl;
+	char _pad1[0x10000 - sizeof(struct mace_isactrl)];
+
+	struct mace_ps2 ps2;
+	char _pad2[0x10000 - sizeof(struct mace_ps2)];
+
+	struct mace_i2c i2c;
+	char _pad3[0x10000 - sizeof(struct mace_i2c)];
+
+	struct mace_timers timers;
+	char _pad4[0x10000 - sizeof(struct mace_timers)];
+};
+
+
+/* 
+ * ISA peripherals
+ */
+
+/* Parallel port */
+struct mace_parallel {	/* later... */
+};
+
+struct mace_ecp1284 {	/* later... */
+};
+
+/* Serial port */
+struct mace_serial {
+	volatile unsigned long xxx;	/* later... */
+};
+
+struct mace_isa {
+	struct mace_parallel parallel;
+	char _pad1[0x8000 - sizeof(struct mace_parallel)];
+
+	struct mace_ecp1284 ecp1284;
+	char _pad2[0x8000 - sizeof(struct mace_ecp1284)];
+
+	struct mace_serial serial1;
+	char _pad3[0x8000 - sizeof(struct mace_serial)];
+
+	struct mace_serial serial2;
+	char _pad4[0x8000 - sizeof(struct mace_serial)];
+
+	volatile unsigned char rtc[0x10000];
+};
+
+struct sgi_mace {
+	char _reserved[0x80000];
+
+	struct mace_pci pci;
+	char _pad0[0x80000 - sizeof(struct mace_pci)];
+
+	struct mace_video video_in1;
+	char _pad1[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_in2;
+	char _pad2[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_out;
+	char _pad3[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_ethernet eth;
+	char _pad4[0x80000 - sizeof(struct mace_ethernet)];
+
+	struct mace_perif perif;
+	char _pad5[0x80000 - sizeof(struct mace_perif)];
+
+	struct mace_isa isa;
+	char _pad6[0x80000 - sizeof(struct mace_isa)];
+};
+
+extern struct sgi_mace *mace;
+
+#endif /* __ASM_MACE_H__ */
diff --git a/include/asm-mips/ip32/machine.h b/include/asm-mips/ip32/machine.h
new file mode 100644
index 000000000000..e440fdf4b232
--- /dev/null
+++ b/include/asm-mips/ip32/machine.h
@@ -0,0 +1,21 @@
+/*
+ * machine.h -- Machine/group probing for ip32
+ *
+ * Copyright (C) 2001 Keith M Wesolowski
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_IP32_MACHINE_H
+#define _ASM_IP32_MACHINE_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SGI_IP32
+
+#define SGI_MACH_O2		0x3201
+
+#endif /* CONFIG_SGI_IP32 */
+
+#endif /* _ASM_SGI_MACHINE_H */
diff --git a/include/asm-mips/ipc.h b/include/asm-mips/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-mips/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-mips/ipcbuf.h b/include/asm-mips/ipcbuf.h
new file mode 100644
index 000000000000..d47d08f264e7
--- /dev/null
+++ b/include/asm-mips/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
new file mode 100644
index 000000000000..b90b11d0b886
--- /dev/null
+++ b/include/asm-mips/irq.h
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <irq.h>
+
+#ifdef CONFIG_I8259
+static inline int irq_canonicalize(int irq)
+{
+	return ((irq == 2) ? 9 : irq);
+}
+#else
+#define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
+#endif
+
+struct pt_regs;
+
+#ifdef CONFIG_PREEMPT
+
+extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
+
+#else
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ *
+ * Ideally there should be away to get this into kernel/irq/handle.c to
+ * avoid the overhead of a call for just a tiny function ...
+ */
+#define do_IRQ(irq, regs)						\
+do {									\
+	irq_enter();							\
+	__do_IRQ((irq), (regs));					\
+	irq_exit();							\
+} while (0)
+
+#endif
+
+extern void arch_init_irq(void);
+
+struct irqaction;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/irq_cpu.h b/include/asm-mips/irq_cpu.h
new file mode 100644
index 000000000000..ed3d1e3d09ec
--- /dev/null
+++ b/include/asm-mips/irq_cpu.h
@@ -0,0 +1,20 @@
+/*
+ *	include/asm-mips/irq_cpu.h
+ *
+ *	MIPS CPU interrupt definitions.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_CPU_H
+#define _ASM_IRQ_CPU_H
+
+extern void mips_cpu_irq_init(int irq_base);
+extern void rm7k_cpu_irq_init(int irq_base);
+extern void rm9k_cpu_irq_init(int irq_base);
+
+#endif /* _ASM_IRQ_CPU_H */
diff --git a/include/asm-mips/isadep.h b/include/asm-mips/isadep.h
new file mode 100644
index 000000000000..7bb003511d9e
--- /dev/null
+++ b/include/asm-mips/isadep.h
@@ -0,0 +1,35 @@
+/*
+ * Various ISA level dependent constants.
+ * Most of the following constants reflect the different layout
+ * of Coprocessor 0 registers.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+#include <linux/config.h>
+
+#ifndef __ASM_ISADEP_H
+#define __ASM_ISADEP_H
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+/*
+ * R2000 or R3000
+ */
+
+/*
+ * kernel or user mode? (CP0_STATUS)
+ */
+#define KU_MASK 0x08
+#define	KU_USER 0x08
+#define KU_KERN 0x00
+
+#else
+/*
+ * kernel or user mode?
+ */
+#define KU_MASK 0x18
+#define	KU_USER 0x10
+#define KU_KERN 0x00
+
+#endif
+
+#endif /* __ASM_ISADEP_H */
diff --git a/include/asm-mips/it8172/it8172.h b/include/asm-mips/it8172/it8172.h
new file mode 100644
index 000000000000..8f23af0a1ee8
--- /dev/null
+++ b/include/asm-mips/it8172/it8172.h
@@ -0,0 +1,348 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172 system controller defines.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __IT8172__H__
+#define __IT8172__H__
+
+#include <asm/addrspace.h>
+
+#define IT8172_BASE			0x18000000
+#define IT8172_PCI_IO_BASE		0x14000000
+#define IT8172_PCI_MEM_BASE		0x10000000
+
+// System registers offsets from IT8172_BASE
+#define IT_CMFPCR			0x0
+#define IT_DSRR				0x2
+#define IT_PCDCR			0x4
+#define IT_SPLLCR			0x6
+#define IT_CIDR				0x10
+#define IT_CRNR				0x12
+#define IT_CPUTR			0x14
+#define IT_CTCR				0x16
+#define IT_SDPR				0xF0
+
+// Power management register offset from IT8172_PCI_IO_BASE
+// Power Management Device Standby Register
+#define IT_PM_DSR		0x15800
+
+#define IT_PM_DSR_TMR0SB	0x0001
+#define IT_PM_DSR_TMR1SB	0x0002
+#define IT_PM_DSR_CIR0SB	0x0004
+#define IT_PM_DSR_CIR1SB	0x0008
+#define IT_PM_DSR_SCR0SB	0x0010
+#define IT_PM_DSR_SCR1SB	0x0020
+#define IT_PM_DSR_PPSB		0x0040
+#define IT_PM_DSR_I2CSB		0x0080
+#define IT_PM_DSR_UARTSB	0x0100
+#define IT_PM_DSR_IDESB		0x0200
+#define IT_PM_DSR_ACSB		0x0400
+#define IT_PM_DSR_M68KSB	0x0800
+
+// Power Management PCI Device Software Reset Register
+#define IT_PM_PCISR             0x15802
+
+#define IT_PM_PCISR_IDESR       0x0001
+#define IT_PM_PCISR_CDMASR      0x0002
+#define IT_PM_PCISR_USBSR       0x0004
+#define IT_PM_PCISR_DMASR       0x0008
+#define IT_PM_PCISR_ACSR        0x0010
+#define IT_PM_PCISR_MEMSR       0x0020
+#define IT_PM_PCISR_68KSR       0x0040
+
+
+// PCI Configuration address and data register offsets
+// from IT8172_BASE
+#define IT_CONFADDR			0x4000
+#define IT_BUSNUM_SHF                   16
+#define IT_DEVNUM_SHF                   11
+#define IT_FUNCNUM_SHF                  8
+#define IT_REGNUM_SHF                   2
+
+#define IT_CONFDATA			0x4004
+
+// PCI configuration header common register offsets
+#define IT_VID				0x00
+#define IT_DID				0x02
+#define IT_PCICMD			0x04
+#define IT_PCISTS			0x06
+#define IT_RID				0x08
+#define IT_CLASSC			0x09
+#define IT_HEADT			0x0E
+#define IT_SERIRQC			0x49
+
+// PCI to Internal/LPC Bus Bridge configuration header register offset
+#define IT_P2I_BCR				0x4C
+#define IT_P2I_D0IOSC				0x50
+#define IT_P2I_D1IOSC				0x54
+#define IT_P2I_D2IOSC				0x58
+#define IT_P2I_D3IOSC				0x5C
+#define IT_P2I_D4IOSC				0x60
+#define IT_P2I_D5IOSC				0x64
+#define IT_P2I_D6IOSC				0x68
+#define IT_P2I_D7IOSC				0x6C
+#define IT_P2I_D8IOSC				0x70
+#define IT_P2I_D9IOSC				0x74
+#define IT_P2I_D10IOSC				0x78
+#define IT_P2I_D11IOSC				0x7C
+
+// Memory controller register offsets from IT8172_BASE
+#define IT_MC_SDRMR					0x1000
+#define IT_MC_SDRTR					0x1004
+#define IT_MC_MCR					0x1008
+#define IT_MC_SDTYPE					0x100C
+#define IT_MC_WPBA					0x1010
+#define IT_MC_WPTA					0x1014
+#define IT_MC_HATR					0x1018
+#define IT_MC_PCICR					0x101C
+
+// Flash/ROM control register offsets from IT8172_BASE
+#define IT_FC_BRCR					0x2000
+#define IT_FC_FCR					0x2004
+#define IT_FC_DCR					0x2008
+
+// M68K interface bridge configuration header register offset
+#define IT_M68K_MBCSR					0x54
+#define IT_M68K_TMR					0x58
+#define IT_M68K_BCR					0x5C
+#define IT_M68K_BSR					0x5D
+#define IT_M68K_DTR					0x5F
+
+// Register offset from IT8172_PCI_IO_BASE
+// These registers are accessible through 8172 PCI IO window.
+
+// INTC
+#define IT_INTC_BASE				0x10000
+#define IT_INTC_LBDNIRR				0x10000
+#define IT_INTC_LBDNIMR				0x10002
+#define IT_INTC_LBDNITR				0x10004
+#define IT_INTC_LBDNIAR				0x10006
+#define IT_INTC_LPCNIRR				0x10010
+#define IT_INTC_LPCNIMR				0x10012
+#define IT_INTC_LPCNITR				0x10014
+#define IT_INTC_LPCNIAR				0x10016
+#define IT_INTC_PDNIRR				0x10020
+#define IT_INTC_PDNIMR				0x10022
+#define IT_INTC_PDNITR				0x10024
+#define IT_INTC_PDNIAR				0x10026
+#define IT_INTC_UMNIRR				0x10030
+#define IT_INTC_UMNITR				0x10034
+#define IT_INTC_UMNIAR				0x10036
+#define IT_INTC_TYPER				0x107FE
+
+// IT8172 PCI device number
+#define IT_C2P_DEVICE				0
+#define IT_AUDIO_DEVICE				1
+#define IT_DMAC_DEVICE				1
+#define IT_CDMAC_DEVICE				1
+#define IT_USB_DEVICE				1
+#define IT_P2I_DEVICE				1
+#define IT_IDE_DEVICE				1
+#define IT_M68K_DEVICE				1
+
+// IT8172 PCI function number
+#define IT_C2P_FUNCION				0
+#define IT_AUDIO_FUNCTION			0
+#define IT_DMAC_FUNCTION			1
+#define IT_CDMAC_FUNCTION			2
+#define IT_USB_FUNCTION				3
+#define IT_P2I_FUNCTION				4
+#define IT_IDE_FUNCTION				5
+#define IT_M68K_FUNCTION			6
+
+// IT8172 GPIO
+#define IT_GPADR				0x13800
+#define IT_GPBDR				0x13808
+#define IT_GPCDR				0x13810
+#define IT_GPACR				0x13802
+#define IT_GPBCR				0x1380A
+#define IT_GPCCR				0x13812
+#define IT_GPAICR				0x13804
+#define IT_GPBICR				0x1380C
+#define IT_GPCICR				0x13814
+#define IT_GPAISR				0x13806
+#define IT_GPBISR				0x1380E
+#define IT_GPCISR				0x13816
+#define IT_GCR					0x13818
+
+// IT8172 RTC
+#define IT_RTC_BASE				0x14800
+#define IT_RTC_CENTURY				0x14808
+
+#define IT_RTC_RIR0				0x00
+#define IT_RTC_RTR0				0x01
+#define IT_RTC_RIR1				0x02
+#define IT_RTC_RTR1				0x03
+#define IT_RTC_RIR2				0x04
+#define IT_RTC_RTR2				0x05
+#define IT_RTC_RCTR				0x08
+#define IT_RTC_RA				0x0A
+#define IT_RTC_RB				0x0B
+#define IT_RTC_RC				0x0C
+#define IT_RTC_RD				0x0D
+
+#define RTC_SEC_INDEX				0x00
+#define RTC_MIN_INDEX				0x02
+#define RTC_HOUR_INDEX				0x04
+#define RTC_DAY_INDEX				0x06
+#define RTC_DATE_INDEX				0x07
+#define RTC_MONTH_INDEX				0x08
+#define RTC_YEAR_INDEX				0x09
+
+// IT8172 internal device registers
+#define IT_TIMER_BASE				0x10800
+#define IT_CIR0_BASE				0x11000
+#define IT_UART_BASE				0x11800
+#define IT_SCR0_BASE				0x12000
+#define IT_SCR1_BASE				0x12800
+#define IT_PP_BASE				0x13000
+#define IT_I2C_BASE				0x14000
+#define IT_CIR1_BASE				0x15000
+
+// IT8172 Smart Card Reader offsets from IT_SCR*_BASE
+#define IT_SCR_SFR				0x08
+#define IT_SCR_SCDR				0x09
+
+// IT8172 IT_SCR_SFR bit definition & mask
+#define	IT_SCR_SFR_GATE_UART			0x40
+#define	IT_SCR_SFR_GATE_UART_BIT		6
+#define IT_SCR_SFR_GATE_UART_OFF		0
+#define	IT_SCR_SFR_GATE_UART_ON			1
+#define	IT_SCR_SFR_FET_CHARGE			0x30
+#define	IT_SCR_SFR_FET_CHARGE_BIT		4
+#define IT_SCR_SFR_FET_CHARGE_3_3_US		3
+#define IT_SCR_SFR_FET_CHARGE_13_US		2
+#define IT_SCR_SFR_FET_CHARGE_53_US		1
+#define IT_SCR_SFR_FET_CHARGE_213_US		0
+#define	IT_SCR_SFR_CARD_FREQ			0x0C
+#define	IT_SCR_SFR_CARD_FREQ_BIT		2
+#define IT_SCR_SFR_CARD_FREQ_STOP		3
+#define IT_SCR_SFR_CARD_FREQ_3_5_MHZ		0
+#define IT_SCR_SFR_CARD_FREQ_7_1_MHZ		2
+#define IT_SCR_SFR_CARD_FREQ_96_DIV_MHZ		1
+#define	IT_SCR_SFR_FET_ACTIVE			0x02
+#define	IT_SCR_SFR_FET_ACTIVE_BIT		1
+#define IT_SCR_SFR_FET_ACTIVE_INVERT		0
+#define IT_SCR_SFR_FET_ACTIVE_NONINVERT		1
+#define	IT_SCR_SFR_ENABLE			0x01
+#define	IT_SCR_SFR_ENABLE_BIT			0
+#define IT_SCR_SFR_ENABLE_OFF			0
+#define IT_SCR_SFR_ENABLE_ON			1
+
+// IT8172 IT_SCR_SCDR bit definition & mask
+#define	IT_SCR_SCDR_RESET_MODE			0x80
+#define	IT_SCR_SCDR_RESET_MODE_BIT		7
+#define	IT_SCR_SCDR_RESET_MODE_ASYNC		0
+#define IT_SCR_SCDR_RESET_MODE_SYNC		1
+#define	IT_SCR_SCDR_DIVISOR			0x7F
+#define	IT_SCR_SCDR_DIVISOR_BIT			0
+#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_1		0x00
+#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_2		0x01
+#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_3		0x7F
+
+// IT8172 DMA
+#define IT_DMAC_BASE				0x16000
+#define IT_DMAC_BCAR0				0x00
+#define IT_DMAC_BCAR1				0x04
+#define IT_DMAC_BCAR2				0x08
+#define IT_DMAC_BCAR3				0x0C
+#define IT_DMAC_BCCR0				0x02
+#define IT_DMAC_BCCR1				0x06
+#define IT_DMAC_BCCR2				0x0a
+#define IT_DMAC_BCCR3				0x0e
+#define IT_DMAC_CR				0x10
+#define IT_DMAC_SR				0x12
+#define IT_DMAC_ESR				0x13
+#define IT_DMAC_RQR				0x14
+#define IT_DMAC_MR				0x16
+#define IT_DMAC_EMR				0x17
+#define IT_DMAC_MKR				0x18
+#define IT_DMAC_PAR0				0x20
+#define IT_DMAC_PAR1				0x22
+#define IT_DMAC_PAR2				0x24
+#define IT_DMAC_PAR3				0x26
+
+// IT8172 IDE
+#define IT_IDE_BASE				0x17800
+#define IT_IDE_STATUS				0x1F7
+
+// IT8172 Audio Controller
+#define IT_AC_BASE				0x17000
+#define	IT_AC_PCMOV				0x00
+#define IT_AC_FMOV				0x02
+#define	IT_AC_I2SV				0x04
+#define IT_AC_DRSS				0x06
+#define IT_AC_PCC				0x08
+#define IT_AC_PCDL				0x0A
+#define IT_AC_PCB1STA				0x0C
+#define IT_AC_PCB2STA				0x10
+#define IT_AC_CAPCC				0x14
+#define IT_AC_CAPCDL				0x16
+#define IT_AC_CAPB1STA				0x18
+#define IT_AC_CAPB2STA				0x1C
+#define IT_AC_CODECC				0x22
+#define IT_AC_I2SMC				0x24
+#define IT_AC_VS				0x26
+#define IT_AC_SRCS				0x28
+#define IT_AC_CIRCP				0x2A
+#define IT_AC_CIRDP				0x2C
+#define IT_AC_TM				0x4A
+#define IT_AC_PFDP				0x4C
+#define IT_AC_GC				0x54
+#define IT_AC_IMC				0x56
+#define IT_AC_ISC				0x5B
+#define IT_AC_OPL3SR				0x68
+#define IT_AC_OPL3DWDR				0x69
+#define IT_AC_OPL3AB1W				0x6A
+#define IT_AC_OPL3DW				0x6B
+#define IT_AC_BPDC				0x70
+
+
+// IT8172 Timer
+#define IT_TIMER_BASE				0x10800
+#define	TIMER_TCVR0				0x00
+#define TIMER_TRVR0				0x02
+#define	TIMER_TCR0				0x04
+#define TIMER_TIRR				0x06
+#define	TIMER_TCVR1				0x08
+#define TIMER_TRVR1				0x0A
+#define	TIMER_TCR1				0x0C
+#define TIMER_TIDR				0x0E
+
+
+#define IT_WRITE(ofs, data) *(volatile u32 *)KSEG1ADDR((IT8172_BASE+ofs)) = data
+#define IT_READ(ofs, data)  data = *(volatile u32 *)KSEG1ADDR((IT8172_BASE+ofs))
+
+#define IT_IO_WRITE(ofs, data) *(volatile u32 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs)) = data
+#define IT_IO_READ(ofs, data)  data = *(volatile u32 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs))
+
+#define IT_IO_WRITE16(ofs, data) *(volatile u16 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs)) = data
+#define IT_IO_READ16(ofs, data)  data = *(volatile u16 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs))
+
+#endif
diff --git a/include/asm-mips/it8172/it8172_cir.h b/include/asm-mips/it8172/it8172_cir.h
new file mode 100644
index 000000000000..6a1dbd29f6d1
--- /dev/null
+++ b/include/asm-mips/it8172/it8172_cir.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172 Consumer IR port defines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define NUM_CIR_PORTS 2
+
+/* Master Control Register */
+#define CIR_RESET              0x1
+#define CIR_FIFO_CLEAR         0x2
+#define CIR_SET_FIFO_TL(x)     (((x)&0x3)<<2)
+#define CIR_ILE                0x10
+#define CIR_ILSEL              0x20
+
+/* Interrupt Enable Register */
+#define CIR_TLDLIE             0x1
+#define CIR_RDAIE              0x2
+#define CIR_RFOIE              0x4
+#define CIR_IEC                0x80
+
+/* Interrupt Identification Register */
+#define CIR_TLDLI              0x1
+#define CIR_RDAI               0x2
+#define CIR_RFOI               0x4
+#define CIR_NIP                0x80
+
+/* Carrier Frequency Register */
+#define CIR_SET_CF(x)          ((x)&0x1f)
+  #define CFQ_38_480           0xB       /* 38 KHz low, 480 KHz high */
+#define CIR_HCFS               0x20
+  #define CIR_SET_HS(x)        (((x)&0x1)<<5)
+
+
+/* Receiver Control Register */
+#define CIR_SET_RXDCR(x)       ((x)&0x7)
+#define CIR_RXACT              0x8
+#define CIR_RXEND              0x10
+#define CIR_RDWOS              0x20
+  #define CIR_SET_RDWOS(x)     (((x)&0x1)<<5)
+#define CIR_RXEN               0x80
+
+/* Transmitter Control Register */
+#define CIR_SET_TXMPW(x)       ((x)&0x7)
+#define CIR_SET_TXMPM(x)       (((x)&0x3)<<3)
+#define CIR_TXENDF             0x20
+#define CIR_TXRLE              0x40
+
+/* Receiver FIFO Status Register */
+#define CIR_RXFBC_MASK         0x3f
+#define CIR_RXFTO              0x80
+
+/* Wakeup Code Length Register */
+#define CIR_SET_WCL            ((x)&0x3f)
+#define CIR_WCL_MASK(x)        ((x)&0x3f)
+
+/* Wakeup Power Control/Status Register */
+#define CIR_BTMON              0x2
+#define CIR_CIRON              0x4
+#define CIR_RCRST              0x10
+#define CIR_WCRST              0x20
+
+struct cir_port {
+	int port;
+	unsigned short baud_rate;
+	unsigned char fifo_tl;
+	unsigned char cfq;
+	unsigned char hcfs;
+	unsigned char rdwos;
+	unsigned char rxdcr;
+};
+
+struct it8172_cir_regs {
+	unsigned char dr;       /* data                        */
+	char pad;
+	unsigned char mstcr;    /* master control              */
+	char pad1;
+	unsigned char ier;      /* interrupt enable            */
+	char pad2;
+	unsigned char iir;      /* interrupt identification    */
+	char pad3;
+	unsigned char cfr;      /* carrier frequency           */
+	char pad4;
+	unsigned char rcr;      /* receiver control            */
+	char pad5;
+	unsigned char tcr;      /* transmitter control         */
+	char pad6;
+	char pad7;
+	char pad8;
+	unsigned char bdlr;     /* baud rate divisor low byte  */
+	char pad9;
+	unsigned char bdhr;     /* baud rate divisor high byte */
+	char pad10;
+	unsigned char tfsr;     /* tx fifo byte count          */
+	char pad11;
+	unsigned char rfsr;     /* rx fifo status              */
+	char pad12;
+	unsigned char wcl;      /* wakeup code length          */
+	char pad13;
+	unsigned char wcr;      /* wakeup code read/write      */
+	char pad14;
+	unsigned char wps;      /* wakeup power control/status */
+};
+
+int cir_port_init(struct cir_port *cir);
+extern void clear_fifo(struct cir_port *cir);
+extern void enable_receiver(struct cir_port *cir);
+extern void disable_receiver(struct cir_port *cir);
+extern void enable_rx_demodulation(struct cir_port *cir);
+extern void disable_rx_demodulation(struct cir_port *cir);
+extern void set_rx_active(struct cir_port *cir);
+extern void int_enable(struct cir_port *cir);
+extern void rx_int_enable(struct cir_port *cir);
+extern char get_int_status(struct cir_port *cir);
+extern int cir_get_rx_count(struct cir_port *cir);
+extern char cir_read_data(struct cir_port *cir);
diff --git a/include/asm-mips/it8172/it8172_dbg.h b/include/asm-mips/it8172/it8172_dbg.h
new file mode 100644
index 000000000000..f404ec7c03ac
--- /dev/null
+++ b/include/asm-mips/it8172/it8172_dbg.h
@@ -0,0 +1,38 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Function prototypes for low level uart routines to
+ *	directly access a 16550 uart.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+
+extern void putch(const unsigned char c);
+extern void puts(unsigned char *cp);
+extern void fputs(unsigned char *cp);
+extern void put64(uint64_t ul);
+extern void put32(unsigned u);
diff --git a/include/asm-mips/it8172/it8172_int.h b/include/asm-mips/it8172/it8172_int.h
new file mode 100644
index 000000000000..837e83ac25f5
--- /dev/null
+++ b/include/asm-mips/it8172/it8172_int.h
@@ -0,0 +1,144 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	ITE 8172 Interrupt Numbering
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _MIPS_ITEINT_H
+#define _MIPS_ITEINT_H
+
+/*
+ * Here's the "strategy":
+ * We number the LPC serial irqs from 0 to 15,
+ * the local bus irqs from 16 to 31,
+ * the pci dev register interrupts from 32 to 47,
+ * and the non-maskable ints from 48 to 53.
+ */
+
+#define IT8172_LPC_IRQ_BASE  0    /* first LPC int number */
+#define IT8172_SERIRQ_0      (IT8172_LPC_IRQ_BASE + 0)
+#define IT8172_SERIRQ_1      (IT8172_LPC_IRQ_BASE + 1)
+#define IT8172_SERIRQ_2      (IT8172_LPC_IRQ_BASE + 2)
+#define IT8172_SERIRQ_3      (IT8172_LPC_IRQ_BASE + 3)
+#define IT8172_SERIRQ_4      (IT8172_LPC_IRQ_BASE + 4)
+#define IT8172_SERIRQ_5      (IT8172_LPC_IRQ_BASE + 5)
+#define IT8172_SERIRQ_6      (IT8172_LPC_IRQ_BASE + 6)
+#define IT8172_SERIRQ_7      (IT8172_LPC_IRQ_BASE + 7)
+#define IT8172_SERIRQ_8      (IT8172_LPC_IRQ_BASE + 8)
+#define IT8172_SERIRQ_9      (IT8172_LPC_IRQ_BASE + 9)
+#define IT8172_SERIRQ_10     (IT8172_LPC_IRQ_BASE + 10)
+#define IT8172_SERIRQ_11     (IT8172_LPC_IRQ_BASE + 11)
+#define IT8172_SERIRQ_12     (IT8172_LPC_IRQ_BASE + 12)
+#define IT8172_SERIRQ_13     (IT8172_LPC_IRQ_BASE + 13)
+#define IT8172_SERIRQ_14     (IT8172_LPC_IRQ_BASE + 14)
+#define IT8172_SERIRQ_15     (IT8172_LPC_IRQ_BASE + 15)
+
+#define IT8172_LB_IRQ_BASE  16   /* first local bus int number */
+#define IT8172_PPR_IRQ          (IT8172_LB_IRQ_BASE + 0) /* parallel port */
+#define IT8172_TIMER0_IRQ       (IT8172_LB_IRQ_BASE + 1)
+#define IT8172_TIMER1_IRQ       (IT8172_LB_IRQ_BASE + 2)
+#define IT8172_I2C_IRQ          (IT8172_LB_IRQ_BASE + 3)
+#define IT8172_GPIO_IRQ         (IT8172_LB_IRQ_BASE + 4)
+#define IT8172_CIR0_IRQ         (IT8172_LB_IRQ_BASE + 5)
+#define IT8172_CIR1_IRQ         (IT8172_LB_IRQ_BASE + 6)
+#define IT8172_UART_IRQ         (IT8172_LB_IRQ_BASE + 7)
+#define IT8172_SCR0_IRQ         (IT8172_LB_IRQ_BASE + 8)
+#define IT8172_SCR1_IRQ         (IT8172_LB_IRQ_BASE + 9)
+#define IT8172_RTC_IRQ          (IT8172_LB_IRQ_BASE + 10)
+#define IT8172_IOCHK_IRQ        (IT8172_LB_IRQ_BASE + 11)
+/* 12 - 15 reserved */
+
+/*
+ * Note here that the pci dev registers includes bits for more than
+ * just the pci devices.
+ */
+#define IT8172_PCI_DEV_IRQ_BASE  32   /* first pci dev irq */
+#define IT8172_AC97_IRQ          (IT8172_PCI_DEV_IRQ_BASE + 0)
+#define IT8172_MC68K_IRQ         (IT8172_PCI_DEV_IRQ_BASE + 1)
+#define IT8172_IDE_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 2)
+#define IT8172_USB_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 3)
+#define IT8172_BRIDGE_MASTER_IRQ (IT8172_PCI_DEV_IRQ_BASE + 4)
+#define IT8172_BRIDGE_TARGET_IRQ (IT8172_PCI_DEV_IRQ_BASE + 5)
+#define IT8172_PCI_INTA_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 6)
+#define IT8172_PCI_INTB_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 7)
+#define IT8172_PCI_INTC_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 8)
+#define IT8172_PCI_INTD_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 9)
+#define IT8172_S_INTA_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 10)
+#define IT8172_S_INTB_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 11)
+#define IT8172_S_INTC_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 12)
+#define IT8172_S_INTD_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 13)
+#define IT8172_CDMA_IRQ          (IT8172_PCI_DEV_IRQ_BASE + 14)
+#define IT8172_DMA_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 15)
+
+#define IT8172_NMI_IRQ_BASE      48
+#define IT8172_SER_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 0)
+#define IT8172_PCI_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 1)
+#define IT8172_RTC_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 2)
+#define IT8172_CPUIF_NMI_IRQ     (IT8172_NMI_IRQ_BASE + 3)
+#define IT8172_PMER_NMI_IRQ      (IT8172_NMI_IRQ_BASE + 4)
+#define IT8172_POWER_NMI_IRQ     (IT8172_NMI_IRQ_BASE + 5)
+
+#define IT8172_LAST_IRQ          (IT8172_POWER_NMI_IRQ)
+/* Finally, let's move over here the mips cpu timer interrupt.
+ */
+#define MIPS_CPU_TIMER_IRQ       (NR_IRQS-1)
+
+/*
+ * IT8172 Interrupt Controller Registers
+ */
+struct it8172_intc_regs {
+        volatile unsigned short lb_req;      /* offset 0 */
+        volatile unsigned short lb_mask;
+        volatile unsigned short lb_trigger;
+        volatile unsigned short lb_level;
+	unsigned char pad0[8];
+
+        volatile unsigned short lpc_req;     /* offset 0x10 */
+        volatile unsigned short lpc_mask;
+        volatile unsigned short lpc_trigger;
+        volatile unsigned short lpc_level;
+	unsigned char pad1[8];
+
+        volatile unsigned short pci_req;     /* offset 0x20 */
+        volatile unsigned short pci_mask;
+        volatile unsigned short pci_trigger;
+        volatile unsigned short pci_level;
+	unsigned char pad2[8];
+
+        volatile unsigned short nmi_req;     /* offset 0x30 */
+        volatile unsigned short nmi_mask;
+        volatile unsigned short nmi_trigger;
+        volatile unsigned short nmi_level;
+	unsigned char pad3[6];
+
+        volatile unsigned short nmi_redir;   /* offset 0x3E */
+	unsigned char pad4[0xBE];
+
+        volatile unsigned short intstatus;    /* offset 0xFE */
+};
+
+#endif /* _MIPS_ITEINT_H */
diff --git a/include/asm-mips/it8172/it8172_pci.h b/include/asm-mips/it8172/it8172_pci.h
new file mode 100644
index 000000000000..42c61f56eeba
--- /dev/null
+++ b/include/asm-mips/it8172/it8172_pci.h
@@ -0,0 +1,108 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172 system controller specific pci defines.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _8172PCI_H_
+#define _8172PCI_H_
+
+// PCI configuration space Type0
+#define	PCI_IDREG	0x00
+#define	PCI_CMDSTSREG	0x04
+#define	PCI_CLASSREG	0x08
+#define	PCI_BHLCREG	0x0C
+#define	PCI_BASE1REG	0x10
+#define	PCI_BASE2REG	0x14
+#define	PCI_BASE3REG	0x18
+#define	PCI_BASE4REG	0x1C
+#define	PCI_BASE5REG	0x20
+#define	PCI_BASE6REG	0x24
+#define	PCI_ROMBASEREG	0x30
+#define	PCI_INTRREG	0x3C
+
+// PCI configuration space Type1
+#define	PCI_BUSNOREG	0x18
+
+#define	IT_PCI_VENDORID(x)	((x) & 0xFFFF)
+#define	IT_PCI_DEVICEID(x)	(((x)>>16) & 0xFFFF)
+
+// Command register
+#define	PCI_CMD_IOEN		0x00000001
+#define	PCI_CMD_MEMEN		0x00000002
+#define	PCI_CMD_BUSMASTER	0x00000004
+#define	PCI_CMD_SPCYCLE		0x00000008
+#define	PCI_CMD_WRINV		0x00000010
+#define	PCI_CMD_VGASNOOP	0x00000020
+#define	PCI_CMD_PERR		0x00000040
+#define	PCI_CMD_WAITCTRL	0x00000080
+#define	PCI_CMD_SERR		0x00000100
+#define	PCI_CMD_FAST_BACKTOBACK	0x00000200
+
+// Status register
+#define	PCI_STS_66MHZ		0x00200000
+#define	PCI_STS_SUPPORT_UDF	0x00400000
+#define	PCI_STS_FAST_BACKTOBACK	0x00800000
+#define	PCI_STS_DATA_PERR	0x01000000
+#define	PCI_STS_DEVSEL0		0x02000000
+#define	PCI_STS_DEVSEL1		0x04000000
+#define	PCI_STS_SIG_TGTABORT	0x08000000
+#define	PCI_STS_RCV_TGTABORT	0x10000000
+#define	PCI_STS_RCV_MSTABORT	0x20000000
+#define	PCI_STS_SYSERR		0x40000000
+#define	PCI_STS_DETCT_PERR	0x80000000
+
+#define	IT_PCI_CLASS(x)		(((x)>>24) & 0xFF)
+#define	IT_PCI_SUBCLASS(x)		(((x)>>16) & 0xFF)
+#define	IT_PCI_INTERFACE(x)	(((x)>>8) & 0xFF)
+#define	IT_PCI_REVISION(x)		((x) & 0xFF)
+
+// PCI class code
+#define	PCI_CLASS_BRIDGE			0x06
+
+// bridge subclass
+#define	PCI_SUBCLASS_BRIDGE_HOST		0x00
+#define	PCI_SUBCLASS_BRIDGE_PCI			0x04
+
+// BHLCREG
+#define	IT_PCI_BIST(x)		(((x)>>24) & 0xFF)
+#define	IT_PCI_HEADERTYPE(x)	(((x)>>16) & 0xFF)
+#define	IT_PCI_LATENCYTIMER(x)	(((x)>>8) & 0xFF)
+#define	IT_PCI_CACHELINESIZE(x)	((x) & 0xFF)
+
+#define	PCI_MULTIFUNC	0x80
+
+// INTRREG
+#define	IT_PCI_MAXLAT(x)		(((x)>>24) & 0xFF)
+#define	IT_PCI_MINGNT(x)		(((x)>>16) & 0xFF)
+#define	IT_PCI_INTRPIN(x)		(((x)>>8) & 0xFF)
+#define	IT_PCI_INTRLINE(x)		((x) & 0xFF)
+
+#define	PCI_VENDOR_NEC	0x1033
+#define PCI_VENDOR_DEC	0x1101
+
+#endif // _8172PCI_H_
diff --git a/include/asm-mips/it8712.h b/include/asm-mips/it8712.h
new file mode 100644
index 000000000000..ca2dee02a011
--- /dev/null
+++ b/include/asm-mips/it8712.h
@@ -0,0 +1,28 @@
+
+#ifndef __IT8712_H__
+#define __IT8712_H__
+
+#define LPC_BASE_ADDR	0x14000000
+
+// MB PnP configuration register
+#define LPC_KEY_ADDR	0x1400002E
+#define LPC_DATA_ADDR	0x1400002F
+
+// Device LDN
+#define LDN_SERIAL1	0x01
+#define LDN_SERIAL2	0x02
+#define LDN_PARALLEL	0x03
+#define LDN_KEYBOARD	0x05
+#define LDN_MOUSE	0x06
+
+#define IT8712_UART1_PORT      0x3F8
+#define IT8712_UART2_PORT      0x2F8
+
+#ifndef ASM_ONLY
+
+void LPCSetConfig(char LdnNumber, char Index, char data);
+char LPCGetConfig(char LdnNumber, char Index);
+
+#endif
+
+#endif
diff --git a/include/asm-mips/jazz.h b/include/asm-mips/jazz.h
new file mode 100644
index 000000000000..81cbf004fd13
--- /dev/null
+++ b/include/asm-mips/jazz.h
@@ -0,0 +1,322 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
+ */
+#ifndef __ASM_JAZZ_H
+#define __ASM_JAZZ_H
+
+/*
+ * The addresses below are virtual address. The mappings are
+ * created on startup via wired entries in the tlb. The Mips
+ * Magnum R3000 and R4000 machines are similar in many aspects,
+ * but many hardware register are accessible at 0xb9000000 in
+ * instead of 0xe0000000.
+ */
+
+#define JAZZ_LOCAL_IO_SPACE     0xe0000000
+
+/*
+ * Revision numbers in PICA_ASIC_REVISION
+ *
+ * 0xf0000000 - Rev1
+ * 0xf0000001 - Rev2
+ * 0xf0000002 - Rev3
+ */
+#define PICA_ASIC_REVISION      0xe0000008
+
+/*
+ * The segments of the seven segment LED are mapped
+ * to the control bits as follows:
+ *
+ *         (7)
+ *      ---------
+ *      |       |
+ *  (2) |       | (6)
+ *      |  (1)  |
+ *      ---------
+ *      |       |
+ *  (3) |       | (5)
+ *      |  (4)  |
+ *      --------- . (0)
+ */
+#define PICA_LED                0xe000f000
+
+/*
+ * Some characters for the LED control registers
+ * The original Mips machines seem to have a LED display
+ * with integrated decoder while the Acer machines can
+ * control each of the seven segments and the dot independently.
+ * It's only a toy, anyway...
+ */
+#define LED_DOT                 0x01
+#define LED_SPACE               0x00
+#define LED_0                   0xfc
+#define LED_1                   0x60
+#define LED_2                   0xda
+#define LED_3                   0xf2
+#define LED_4                   0x66
+#define LED_5                   0xb6
+#define LED_6                   0xbe
+#define LED_7                   0xe0
+#define LED_8                   0xfe
+#define LED_9                   0xf6
+#define LED_A                   0xee
+#define LED_b                   0x3e
+#define LED_C                   0x9c
+#define LED_d                   0x7a
+#define LED_E                   0x9e
+#define LED_F                   0x8e
+
+#ifndef __ASSEMBLY__
+
+static __inline__ void pica_set_led(unsigned int bits)
+{
+	volatile unsigned int *led_register = (unsigned int *) PICA_LED;
+
+	*led_register = bits;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Base address of the Sonic Ethernet adapter in Jazz machines.
+ */
+#define JAZZ_ETHERNET_BASE  0xe0001000
+
+/*
+ * Base address of the 53C94 SCSI hostadapter in Jazz machines.
+ */
+#define JAZZ_SCSI_BASE		0xe0002000
+
+/*
+ * i8042 keyboard controller for JAZZ and PICA chipsets.
+ * This address is just a guess and seems to differ from
+ * other mips machines such as RC3xxx...
+ */
+#define JAZZ_KEYBOARD_ADDRESS   0xe0005000
+#define JAZZ_KEYBOARD_DATA      0xe0005000
+#define JAZZ_KEYBOARD_COMMAND   0xe0005001
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char data;
+	unsigned char command;
+} jazz_keyboard_hardware;
+
+#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
+
+typedef struct {
+	unsigned char pad0[3];
+	unsigned char data;
+	unsigned char pad1[3];
+	unsigned char command;
+} mips_keyboard_hardware;
+
+/*
+ * For now. Needs to be changed for RC3xxx support. See below.
+ */
+#define keyboard_hardware       jazz_keyboard_hardware
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * i8042 keyboard controller for most other Mips machines.
+ */
+#define MIPS_KEYBOARD_ADDRESS   0xb9005000
+#define MIPS_KEYBOARD_DATA      0xb9005003
+#define MIPS_KEYBOARD_COMMAND   0xb9005007
+
+/*
+ * Serial and parallel ports (WD 16C552) on the Mips JAZZ
+ */
+#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000
+
+/*
+ * Dummy Device Address. Used in jazzdma.c
+ */
+#define JAZZ_DUMMY_DEVICE       0xe000d000
+
+/*
+ * JAZZ timer registers and interrupt no.
+ * Note that the hardware timer interrupt is actually on
+ * cpu level 6, but to keep compatibility with PC stuff
+ * it is remapped to vector 0. See arch/mips/kernel/entry.S.
+ */
+#define JAZZ_TIMER_INTERVAL     0xe0000228
+#define JAZZ_TIMER_REGISTER     0xe0000230
+
+/*
+ * DRAM configuration register
+ */
+#ifndef __ASSEMBLY__
+#ifdef __MIPSEL__
+typedef struct {
+	unsigned int bank2 : 3;
+	unsigned int bank1 : 3;
+	unsigned int mem_bus_width : 1;
+	unsigned int reserved2 : 1;
+	unsigned int page_mode : 1;
+	unsigned int reserved1 : 23;
+} dram_configuration;
+#else /* defined (__MIPSEB__) */
+typedef struct {
+	unsigned int reserved1 : 23;
+	unsigned int page_mode : 1;
+	unsigned int reserved2 : 1;
+	unsigned int mem_bus_width : 1;
+	unsigned int bank1 : 3;
+	unsigned int bank2 : 3;
+} dram_configuration;
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define PICA_DRAM_CONFIG        0xe00fffe0
+
+/*
+ * JAZZ interrupt control registers
+ */
+#define JAZZ_IO_IRQ_SOURCE      0xe0010000
+#define JAZZ_IO_IRQ_ENABLE      0xe0010002
+
+/*
+ * JAZZ interrupt enable bits
+ */
+#define JAZZ_IE_PARALLEL            (1 << 0)
+#define JAZZ_IE_FLOPPY              (1 << 1)
+#define JAZZ_IE_SOUND               (1 << 2)
+#define JAZZ_IE_VIDEO               (1 << 3)
+#define JAZZ_IE_ETHERNET            (1 << 4)
+#define JAZZ_IE_SCSI                (1 << 5)
+#define JAZZ_IE_KEYBOARD            (1 << 6)
+#define JAZZ_IE_MOUSE               (1 << 7)
+#define JAZZ_IE_SERIAL1             (1 << 8)
+#define JAZZ_IE_SERIAL2             (1 << 9)
+
+/*
+ * JAZZ Interrupt Level definitions
+ *
+ * This is somewhat broken.  For reasons which nobody can remember anymore
+ * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
+ */
+#define JAZZ_PARALLEL_IRQ       16
+#define JAZZ_FLOPPY_IRQ         17
+#define JAZZ_SOUND_IRQ          18
+#define JAZZ_VIDEO_IRQ          19
+#define JAZZ_ETHERNET_IRQ       20
+#define JAZZ_SCSI_IRQ           21
+#define JAZZ_KEYBOARD_IRQ       22
+#define JAZZ_MOUSE_IRQ          23
+#define JAZZ_SERIAL1_IRQ        24
+#define JAZZ_SERIAL2_IRQ        25
+
+#define JAZZ_TIMER_IRQ          31
+
+
+/*
+ * JAZZ DMA Channels
+ * Note: Channels 4...7 are not used with respect to the Acer PICA-61
+ * chipset which does not provide these DMA channels.
+ */
+#define JAZZ_SCSI_DMA           0              /* SCSI */
+#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */
+#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */
+#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */
+
+/*
+ * JAZZ R4030 MCT_ADR chip (DMA controller)
+ * Note: Virtual Addresses !
+ */
+#define JAZZ_R4030_CONFIG	0xE0000000	/* R4030 config register */
+#define JAZZ_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
+
+#define JAZZ_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
+
+#define JAZZ_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Address */
+
+#define JAZZ_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
+
+/*
+ * Remote Speed Registers.
+ *
+ *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
+ *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
+ *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
+ * 12: reserved, 13: free,     14: 7seg LED, 15: ???
+ */
+#define JAZZ_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
+						/* 0xE0000070,78,80... 0xE00000E8 */
+#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR   0xE0000010	/* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
+
+/*
+ * Virtual (E)ISA controller address
+ */
+#define JAZZ_EISA_IRQ_ACK	0xE0000238	/* EISA interrupt acknowledge */
+
+/*
+ * Access the R4030 DMA and I/O Controller
+ */
+#ifndef __ASSEMBLY__
+
+static inline void r4030_delay(void)
+{
+__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	".set\treorder");
+}
+
+static inline unsigned short r4030_read_reg16(unsigned long addr)
+{
+	unsigned short ret = *((volatile unsigned short *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline unsigned int r4030_read_reg32(unsigned long addr)
+{
+	unsigned int ret = *((volatile unsigned int *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline void r4030_write_reg16(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned short *)addr) = val;
+	r4030_delay();
+}
+
+static inline void r4030_write_reg32(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned int *)addr) = val;
+	r4030_delay();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define JAZZ_FDC_BASE	0xe0003000
+#define JAZZ_RTC_BASE	0xe0004000
+#define JAZZ_PORT_BASE	0xe2000000
+
+#define JAZZ_EISA_BASE	0xe3000000
+
+#endif /* __ASM_JAZZ_H */
diff --git a/include/asm-mips/jazzdma.h b/include/asm-mips/jazzdma.h
new file mode 100644
index 000000000000..0a205b77e505
--- /dev/null
+++ b/include/asm-mips/jazzdma.h
@@ -0,0 +1,96 @@
+/*
+ * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
+ */
+#ifndef _ASM_JAZZDMA_H
+#define _ASM_JAZZDMA_H
+
+/*
+ * Prototypes and macros
+ */
+extern void vdma_init(void);
+extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
+extern int vdma_free(unsigned long laddr);
+extern int vdma_remap(unsigned long laddr, unsigned long paddr,
+                      unsigned long size);
+extern unsigned long vdma_phys2log(unsigned long paddr);
+extern unsigned long vdma_log2phys(unsigned long laddr);
+extern void vdma_stats(void);		/* for debugging only */
+
+extern void vdma_enable(int channel);
+extern void vdma_disable(int channel);
+extern void vdma_set_mode(int channel, int mode);
+extern void vdma_set_addr(int channel, long addr);
+extern void vdma_set_count(int channel, int count);
+extern int vdma_get_residue(int channel);
+extern int vdma_get_enable(int channel);
+
+/*
+ * some definitions used by the driver functions
+ */
+#define VDMA_PAGESIZE		4096
+#define VDMA_PGTBL_ENTRIES	4096
+#define VDMA_PGTBL_SIZE		(sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
+#define VDMA_PAGE_EMPTY		0xff000000
+
+/*
+ * Macros to get page no. and offset of a given address
+ * Note that VDMA_PAGE() works for physical addresses only
+ */
+#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+
+/*
+ * error code returned by vdma_alloc()
+ * (See also arch/mips/kernel/jazzdma.c)
+ */
+#define VDMA_ERROR              0xffffffff
+
+/*
+ * VDMA pagetable entry description
+ */
+typedef volatile struct VDMA_PGTBL_ENTRY {
+	unsigned int frame;		/* physical frame no. */
+	unsigned int owner;		/* owner of this entry (0=free) */
+} VDMA_PGTBL_ENTRY;
+
+
+/*
+ * DMA channel control registers
+ * in the R4030 MCT_ADR chip
+ */
+#define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
+						/* 0xE0000100,120,140... */
+#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
+						/* 0xE0000108,128,148... */
+#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
+						/* 0xE0000110,130,150... */
+#define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
+						/* 0xE0000118,138,158... */
+
+/* channel enable register bits */
+
+#define R4030_CHNL_ENABLE        (1<<0)
+#define R4030_CHNL_WRITE         (1<<1)
+#define R4030_TC_INTR            (1<<8)
+#define R4030_MEM_INTR           (1<<9)
+#define R4030_ADDR_INTR          (1<<10)
+
+/*
+ * Channel mode register bits
+ */
+#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80      (1)
+#define R4030_MODE_ATIME_120     (2)
+#define R4030_MODE_ATIME_160     (3)
+#define R4030_MODE_ATIME_200     (4)
+#define R4030_MODE_ATIME_240     (5)
+#define R4030_MODE_ATIME_280     (6)
+#define R4030_MODE_ATIME_320     (7)
+#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
+#define R4030_MODE_WIDTH_16      (2<<3)
+#define R4030_MODE_WIDTH_32      (3<<3)
+#define R4030_MODE_INTR_EN       (1<<5)
+#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
+#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
+
+#endif /* _ASM_JAZZDMA_H */
diff --git a/include/asm-mips/jmr3927/irq.h b/include/asm-mips/jmr3927/irq.h
new file mode 100644
index 000000000000..b0c325a22343
--- /dev/null
+++ b/include/asm-mips/jmr3927/irq.h
@@ -0,0 +1,62 @@
+/*
+ *  linux/include/asm-mips/tx3927/irq.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Toshiba Corporation
+ */
+#ifndef __ASM_TX3927_IRQ_H
+#define __ASM_TX3927_IRQ_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <asm/irq.h>
+
+struct tb_irq_space {
+	struct tb_irq_space* next;
+	int start_irqno;
+	int nr_irqs;
+	void (*mask_func)(int irq_nr, int space_id);
+	void (*unmask_func)(int irq_no, int space_id);
+	const char *name;
+	int space_id;
+	int can_share;
+};
+extern struct tb_irq_space* tb_irq_spaces;
+
+static __inline__ void add_tb_irq_space(struct tb_irq_space* sp)
+{
+	sp->next = tb_irq_spaces;
+	tb_irq_spaces = sp;
+}
+
+
+struct pt_regs;
+extern void
+toshibaboards_spurious(struct pt_regs *regs, int irq);
+extern void
+toshibaboards_irqdispatch(struct pt_regs *regs, int irq);
+
+extern struct irqaction *
+toshibaboards_get_irq_action(int irq);
+extern int
+toshibaboards_setup_irq(int irq, struct irqaction * new);
+
+
+#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
+extern void tx_branch_likely_bug_fixup(struct pt_regs *regs);
+#endif
+
+extern int (*toshibaboards_gen_iack)(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#define NR_ISA_IRQS 16
+#define TB_IRQ_IS_ISA(irq)	\
+	(0 <= (irq) && (irq) < NR_ISA_IRQS)
+#define TB_IRQ_TO_ISA_IRQ(irq)	(irq)
+
+#endif /* __ASM_TX3927_IRQ_H */
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h
new file mode 100644
index 000000000000..86df317b4078
--- /dev/null
+++ b/include/asm-mips/jmr3927/jmr3927.h
@@ -0,0 +1,325 @@
+/*
+ * Defines for the TJSYS JMR-TX3927/JMI-3927IO2/JMY-1394IF.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#ifndef __ASM_TX3927_JMR3927_H
+#define __ASM_TX3927_JMR3927_H
+
+#include <asm/jmr3927/tx3927.h>
+#include <asm/addrspace.h>
+#include <asm/jmr3927/irq.h>
+#ifndef __ASSEMBLY__
+#include <asm/system.h>
+#endif
+
+/* CS */
+#define JMR3927_ROMCE0	0x1fc00000	/* 4M */
+#define JMR3927_ROMCE1	0x1e000000	/* 4M */
+#define JMR3927_ROMCE2	0x14000000	/* 16M */
+#define JMR3927_ROMCE3	0x10000000	/* 64M */
+#define JMR3927_ROMCE5	0x1d000000	/* 4M */
+#define JMR3927_SDCS0	0x00000000	/* 32M */
+#define JMR3927_SDCS1	0x02000000	/* 32M */
+/* PCI Direct Mappings */
+
+#define JMR3927_PCIMEM	0x08000000
+#define JMR3927_PCIMEM_SIZE	0x08000000	/* 128M */
+#define JMR3927_PCIIO	0x15000000
+#define JMR3927_PCIIO_SIZE	0x01000000	/* 16M */
+
+#define JMR3927_SDRAM_SIZE	0x02000000	/* 32M */
+#define JMR3927_PORT_BASE	KSEG1
+
+/* select indirect initiator access per errata */
+#define JMR3927_INIT_INDIRECT_PCI
+#define PCI_ISTAT_IDICC           0x1000
+#define PCI_IPCIBE_IBE_LONG       0
+#define PCI_IPCIBE_ICMD_IOREAD    2
+#define PCI_IPCIBE_ICMD_IOWRITE   3
+#define PCI_IPCIBE_ICMD_MEMREAD   6
+#define PCI_IPCIBE_ICMD_MEMWRITE  7
+#define PCI_IPCIBE_ICMD_SHIFT     4
+
+/* Address map (virtual address) */
+#define JMR3927_ROM0_BASE	(KSEG1 + JMR3927_ROMCE0)
+#define JMR3927_ROM1_BASE	(KSEG1 + JMR3927_ROMCE1)
+#define JMR3927_IOC_BASE	(KSEG1 + JMR3927_ROMCE2)
+#define JMR3927_IOB_BASE	(KSEG1 + JMR3927_ROMCE3)
+#define JMR3927_ISAMEM_BASE	(JMR3927_IOB_BASE)
+#define JMR3927_ISAIO_BASE	(JMR3927_IOB_BASE + 0x01000000)
+#define JMR3927_ISAC_BASE	(JMR3927_IOB_BASE + 0x02000000)
+#define JMR3927_LCDVGA_REG_BASE	(JMR3927_IOB_BASE + 0x03000000)
+#define JMR3927_LCDVGA_MEM_BASE	(JMR3927_IOB_BASE + 0x03800000)
+#define JMR3927_JMY1394_BASE	(KSEG1 + JMR3927_ROMCE5)
+#define JMR3927_PREMIER3_BASE	(JMR3927_JMY1394_BASE + 0x00100000)
+#define JMR3927_PCIMEM_BASE	(KSEG1 + JMR3927_PCIMEM)
+#define JMR3927_PCIIO_BASE	(KSEG1 + JMR3927_PCIIO)
+
+#define JMR3927_IOC_REV_ADDR	(JMR3927_IOC_BASE + 0x00000000)
+#define JMR3927_IOC_NVRAMB_ADDR	(JMR3927_IOC_BASE + 0x00010000)
+#define JMR3927_IOC_LED_ADDR	(JMR3927_IOC_BASE + 0x00020000)
+#define JMR3927_IOC_DIPSW_ADDR	(JMR3927_IOC_BASE + 0x00030000)
+#define JMR3927_IOC_BREV_ADDR	(JMR3927_IOC_BASE + 0x00040000)
+#define JMR3927_IOC_DTR_ADDR	(JMR3927_IOC_BASE + 0x00050000)
+#define JMR3927_IOC_INTS1_ADDR	(JMR3927_IOC_BASE + 0x00080000)
+#define JMR3927_IOC_INTS2_ADDR	(JMR3927_IOC_BASE + 0x00090000)
+#define JMR3927_IOC_INTM_ADDR	(JMR3927_IOC_BASE + 0x000a0000)
+#define JMR3927_IOC_INTP_ADDR	(JMR3927_IOC_BASE + 0x000b0000)
+#define JMR3927_IOC_RESET_ADDR	(JMR3927_IOC_BASE + 0x000f0000)
+
+#define JMR3927_ISAC_REV_ADDR	(JMR3927_ISAC_BASE + 0x00000000)
+#define JMR3927_ISAC_EINTS_ADDR	(JMR3927_ISAC_BASE + 0x00200000)
+#define JMR3927_ISAC_EINTM_ADDR	(JMR3927_ISAC_BASE + 0x00300000)
+#define JMR3927_ISAC_NMI_ADDR	(JMR3927_ISAC_BASE + 0x00400000)
+#define JMR3927_ISAC_LED_ADDR	(JMR3927_ISAC_BASE + 0x00500000)
+#define JMR3927_ISAC_INTP_ADDR	(JMR3927_ISAC_BASE + 0x00800000)
+#define JMR3927_ISAC_INTS1_ADDR	(JMR3927_ISAC_BASE + 0x00900000)
+#define JMR3927_ISAC_INTS2_ADDR	(JMR3927_ISAC_BASE + 0x00a00000)
+#define JMR3927_ISAC_INTM_ADDR	(JMR3927_ISAC_BASE + 0x00b00000)
+
+/* Flash ROM */
+#define JMR3927_FLASH_BASE	(JMR3927_ROM0_BASE)
+#define JMR3927_FLASH_SIZE	0x00400000
+
+/* bits for IOC_REV/IOC_BREV/ISAC_REV (high byte) */
+#define JMR3927_IDT_MASK	0xfc
+#define JMR3927_REV_MASK	0x03
+#define JMR3927_IOC_IDT		0xe0
+#define JMR3927_ISAC_IDT	0x20
+
+/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */
+#define JMR3927_IOC_INTB_PCIA	0
+#define JMR3927_IOC_INTB_PCIB	1
+#define JMR3927_IOC_INTB_PCIC	2
+#define JMR3927_IOC_INTB_PCID	3
+#define JMR3927_IOC_INTB_MODEM	4
+#define JMR3927_IOC_INTB_INT6	5
+#define JMR3927_IOC_INTB_INT7	6
+#define JMR3927_IOC_INTB_SOFT	7
+#define JMR3927_IOC_INTF_PCIA	(1 << JMR3927_IOC_INTF_PCIA)
+#define JMR3927_IOC_INTF_PCIB	(1 << JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IOC_INTF_PCIC	(1 << JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IOC_INTF_PCID	(1 << JMR3927_IOC_INTB_PCID)
+#define JMR3927_IOC_INTF_MODEM	(1 << JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IOC_INTF_INT6	(1 << JMR3927_IOC_INTB_INT6)
+#define JMR3927_IOC_INTF_INT7	(1 << JMR3927_IOC_INTB_INT7)
+#define JMR3927_IOC_INTF_SOFT	(1 << JMR3927_IOC_INTB_SOFT)
+
+/* bits for IOC_RESET (high byte) */
+#define JMR3927_IOC_RESET_CPU	1
+#define JMR3927_IOC_RESET_PCI	2
+
+/* bits for ISAC_EINTS/ISAC_EINTM (high byte) */
+#define JMR3927_ISAC_EINTB_IOCHK	2
+#define JMR3927_ISAC_EINTB_BWTH	4
+#define JMR3927_ISAC_EINTF_IOCHK	(1 << JMR3927_ISAC_EINTB_IOCHK)
+#define JMR3927_ISAC_EINTF_BWTH	(1 << JMR3927_ISAC_EINTB_BWTH)
+
+/* bits for ISAC_LED (high byte) */
+#define JMR3927_ISAC_LED_ISALED	0x01
+#define JMR3927_ISAC_LED_USRLED	0x02
+
+/* bits for ISAC_INTS/ISAC_INTM/ISAC_INTP (high byte) */
+#define JMR3927_ISAC_INTB_IRQ5	0
+#define JMR3927_ISAC_INTB_IRQKB	1
+#define JMR3927_ISAC_INTB_IRQMOUSE	2
+#define JMR3927_ISAC_INTB_IRQ4	3
+#define JMR3927_ISAC_INTB_IRQ12	4
+#define JMR3927_ISAC_INTB_IRQ3	5
+#define JMR3927_ISAC_INTB_IRQ10	6
+#define JMR3927_ISAC_INTB_ISAER	7
+#define JMR3927_ISAC_INTF_IRQ5	(1 << JMR3927_ISAC_INTB_IRQ5)
+#define JMR3927_ISAC_INTF_IRQKB	(1 << JMR3927_ISAC_INTB_IRQKB)
+#define JMR3927_ISAC_INTF_IRQMOUSE	(1 << JMR3927_ISAC_INTB_IRQMOUSE)
+#define JMR3927_ISAC_INTF_IRQ4	(1 << JMR3927_ISAC_INTB_IRQ4)
+#define JMR3927_ISAC_INTF_IRQ12	(1 << JMR3927_ISAC_INTB_IRQ12)
+#define JMR3927_ISAC_INTF_IRQ3	(1 << JMR3927_ISAC_INTB_IRQ3)
+#define JMR3927_ISAC_INTF_IRQ10	(1 << JMR3927_ISAC_INTB_IRQ10)
+#define JMR3927_ISAC_INTF_ISAER	(1 << JMR3927_ISAC_INTB_ISAER)
+
+#ifndef __ASSEMBLY__
+
+#if 0
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned short *)(a)) = (d) << 8)
+#define jmr3927_ioc_reg_in(a)		(((*(volatile unsigned short *)(a)) >> 8) & 0xff)
+#else
+#if defined(__BIG_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)(a)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)(a))
+#elif defined(__LITTLE_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)((a)^1)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)((a)^1))
+#else
+#error "No Endian"
+#endif
+#endif
+#define jmr3927_isac_reg_out(d, a)	((*(volatile unsigned char *)(a)) = (d))
+#define jmr3927_isac_reg_in(a)		(*(volatile unsigned char *)(a))
+
+static inline int jmr3927_have_isac(void)
+{
+	unsigned char idt;
+	unsigned long flags;
+	unsigned long romcr3;
+
+	local_irq_save(flags);
+	romcr3 = tx3927_romcptr->cr[3];
+	tx3927_romcptr->cr[3] &= 0xffffefff;	/* do not wait infinitely */
+	idt = jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_IDT_MASK;
+	tx3927_romcptr->cr[3] = romcr3;
+	local_irq_restore(flags);
+
+	return idt == JMR3927_ISAC_IDT;
+}
+#define jmr3927_have_nvram() \
+	((jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_IDT_MASK) == JMR3927_IOC_IDT)
+
+/* NVRAM macro */
+#define jmr3927_nvram_in(ofs) \
+	jmr3927_ioc_reg_in(JMR3927_IOC_NVRAMB_ADDR + ((ofs) << 1))
+#define jmr3927_nvram_out(d, ofs) \
+	jmr3927_ioc_reg_out(d, JMR3927_IOC_NVRAMB_ADDR + ((ofs) << 1))
+
+/* LED macro */
+#define jmr3927_led_set(n/*0-16*/)	jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR)
+#define jmr3927_io_led_set(n/*0-3*/)	jmr3927_isac_reg_out((n), JMR3927_ISAC_LED_ADDR)
+
+#define jmr3927_led_and_set(n/*0-16*/)	jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR)
+
+/* DIPSW4 macro */
+#define jmr3927_dipsw1()	((tx3927_pioptr->din & (1 << 11)) == 0)
+#define jmr3927_dipsw2()	((tx3927_pioptr->din & (1 << 10)) == 0)
+#define jmr3927_dipsw3()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0)
+#define jmr3927_dipsw4()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0)
+#define jmr3927_io_dipsw()	(jmr3927_isac_reg_in(JMR3927_ISAC_LED_ADDR) >> 4)
+
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * UART defines for serial.h
+ */
+
+/* use Pre-scaler T0 (1/2) */
+#define JMR3927_BASE_BAUD (JMR3927_IMCLK / 2 / 16)
+
+#define UART0_ADDR   0xfffef300
+#define UART1_ADDR   0xfffef400
+#define UART0_INT    JMR3927_IRQ_IRC_SIO0
+#define UART1_INT    JMR3927_IRQ_IRC_SIO1
+#define UART0_FLAGS  ASYNC_BOOT_AUTOCONF
+#define UART1_FLAGS  0
+
+/*
+ * IRQ mappings
+ */
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an JMR machine.  Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define JMR3927_NR_IRQ_IRC	16	/* On-Chip IRC */
+#define JMR3927_NR_IRQ_IOC	8	/* PCI/MODEM/INT[6:7] */
+#define JMR3927_NR_IRQ_ISAC	8	/* ISA */
+
+
+#define JMR3927_IRQ_IRC	NR_ISA_IRQS
+#define JMR3927_IRQ_IOC	(JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
+#define JMR3927_IRQ_ISAC	(JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
+#define JMR3927_IRQ_END	(JMR3927_IRQ_ISAC + JMR3927_NR_IRQ_ISAC)
+#define JMR3927_IRQ_IS_IRC(irq)	(JMR3927_IRQ_IRC <= (irq) && (irq) < JMR3927_IRQ_IOC)
+#define JMR3927_IRQ_IS_IOC(irq)		(JMR3927_IRQ_IOC <= (irq) && (irq) < JMR3927_IRQ_ISAC)
+#define JMR3927_IRQ_IS_ISAC(irq)	(JMR3927_IRQ_ISAC <= (irq) && (irq) < JMR3927_IRQ_END)
+
+#define JMR3927_IRQ_IRC_INT0	(JMR3927_IRQ_IRC + TX3927_IR_INT0)
+#define JMR3927_IRQ_IRC_INT1	(JMR3927_IRQ_IRC + TX3927_IR_INT1)
+#define JMR3927_IRQ_IRC_INT2	(JMR3927_IRQ_IRC + TX3927_IR_INT2)
+#define JMR3927_IRQ_IRC_INT3	(JMR3927_IRQ_IRC + TX3927_IR_INT3)
+#define JMR3927_IRQ_IRC_INT4	(JMR3927_IRQ_IRC + TX3927_IR_INT4)
+#define JMR3927_IRQ_IRC_INT5	(JMR3927_IRQ_IRC + TX3927_IR_INT5)
+#define JMR3927_IRQ_IRC_SIO0	(JMR3927_IRQ_IRC + TX3927_IR_SIO0)
+#define JMR3927_IRQ_IRC_SIO1	(JMR3927_IRQ_IRC + TX3927_IR_SIO1)
+#define JMR3927_IRQ_IRC_SIO(ch)	(JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
+#define JMR3927_IRQ_IRC_DMA	(JMR3927_IRQ_IRC + TX3927_IR_DMA)
+#define JMR3927_IRQ_IRC_PIO	(JMR3927_IRQ_IRC + TX3927_IR_PIO)
+#define JMR3927_IRQ_IRC_PCI	(JMR3927_IRQ_IRC + TX3927_IR_PCI)
+#define JMR3927_IRQ_IRC_TMR0	(JMR3927_IRQ_IRC + TX3927_IR_TMR0)
+#define JMR3927_IRQ_IRC_TMR1	(JMR3927_IRQ_IRC + TX3927_IR_TMR1)
+#define JMR3927_IRQ_IRC_TMR2	(JMR3927_IRQ_IRC + TX3927_IR_TMR2)
+#define JMR3927_IRQ_IOC_PCIA	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
+#define JMR3927_IRQ_IOC_PCIB	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IRQ_IOC_PCIC	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IRQ_IOC_PCID	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID)
+#define JMR3927_IRQ_IOC_MODEM	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IRQ_IOC_INT6	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6)
+#define JMR3927_IRQ_IOC_INT7	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7)
+#define JMR3927_IRQ_IOC_SOFT	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT)
+#define JMR3927_IRQ_ISAC_IRQ5	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ5)
+#define JMR3927_IRQ_ISAC_IRQKB	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQKB)
+#define JMR3927_IRQ_ISAC_IRQMOUSE	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQMOUSE)
+#define JMR3927_IRQ_ISAC_IRQ4	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ4)
+#define JMR3927_IRQ_ISAC_IRQ12	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ12)
+#define JMR3927_IRQ_ISAC_IRQ3	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ3)
+#define JMR3927_IRQ_ISAC_IRQ10	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ10)
+#define JMR3927_IRQ_ISAC_ISAER	(JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_ISAER)
+
+#if 0	/* auto detect */
+/* RTL8019AS 10M Ether (JMI-3927IO2:JPW2:1-2 Short) */
+#define JMR3927_IRQ_ETHER1	JMR3927_IRQ_IRC_INT0
+#endif
+/* IOC (PCI, MODEM) */
+#define JMR3927_IRQ_IOCINT	JMR3927_IRQ_IRC_INT1
+/* ISAC (ISA, PCMCIA, KEYBOARD, MOUSE) */
+#define JMR3927_IRQ_ISACINT	JMR3927_IRQ_IRC_INT2
+/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
+#define JMR3927_IRQ_ETHER0	JMR3927_IRQ_IRC_INT3
+/* Clock Tick (10ms) */
+#define JMR3927_IRQ_TICK	JMR3927_IRQ_IRC_TMR0
+#define JMR3927_IRQ_IDE		JMR3927_IRQ_ISAC_IRQ12
+
+/* IEEE1394 (Note that this may conflicts with RTL8019AS 10M Ether...) */
+#define JMR3927_IRQ_PREMIER3	JMR3927_IRQ_IRC_INT0
+
+/* I/O Ports */
+/* RTL8019AS 10M Ether */
+#define JMR3927_ETHER1_PORT	(JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x280)
+#define JMR3927_KBD_PORT	(JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x00800060)
+#define JMR3927_IDE_PORT	(JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x001001f0)
+
+/* Clocks */
+#define JMR3927_CORECLK	132710400	/* 132.7MHz */
+#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
+#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
+
+#define jmr3927_tmrptr		tx3927_tmrptr(0)	/* TMR0 */
+
+
+/*
+ * TX3927 Pin Configuration:
+ *
+ *	PCFG bits		Avail			Dead
+ *	SELSIO[1:0]:11		RXD[1:0], TXD[1:0]	PIO[6:3]
+ *	SELSIOC[0]:1		CTS[0], RTS[0]		INT[5:4]
+ *	SELSIOC[1]:0,SELDSF:0,	GSDAO[0],GPCST[3]	CTS[1], RTS[1],DSF,
+ *	  GDBGE*					  PIO[2:1]
+ *	SELDMA[2]:1		DMAREQ[2],DMAACK[2]	PIO[13:12]
+ *	SELTMR[2:0]:000					TIMER[1:0]
+ *	SELCS:0,SELDMA[1]:0	PIO[11;10]		SDCS_CE[7:6],
+ *							  DMAREQ[1],DMAACK[1]
+ *	SELDMA[0]:1		DMAREQ[0],DMAACK[0]	PIO[9:8]
+ *	SELDMA[3]:1		DMAREQ[3],DMAACK[3]	PIO[15:14]
+ *	SELDONE:1		DMADONE			PIO[7]
+ *
+ * Usable pins are:
+ *	RXD[1;0],TXD[1:0],CTS[0],RTS[0],
+ *	DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11]
+ *	INT[3:0]
+ */
+
+#endif /* __ASM_TX3927_JMR3927_H */
diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/jmr3927/tx3927.h
new file mode 100644
index 000000000000..b3d67c75d9ac
--- /dev/null
+++ b/include/asm-mips/jmr3927/tx3927.h
@@ -0,0 +1,365 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Toshiba Corporation
+ */
+#ifndef __ASM_TX3927_H
+#define __ASM_TX3927_H
+
+#include <asm/jmr3927/txx927.h>
+
+#define TX3927_SDRAMC_REG	0xfffe8000
+#define TX3927_ROMC_REG		0xfffe9000
+#define TX3927_DMA_REG		0xfffeb000
+#define TX3927_IRC_REG		0xfffec000
+#define TX3927_PCIC_REG		0xfffed000
+#define TX3927_CCFG_REG		0xfffee000
+#define TX3927_NR_TMR	3
+#define TX3927_TMR_REG(ch)	(0xfffef000 + (ch) * 0x100)
+#define TX3927_NR_SIO	2
+#define TX3927_SIO_REG(ch)	(0xfffef300 + (ch) * 0x100)
+#define TX3927_PIO_REG		0xfffef500
+
+#ifndef __ASSEMBLY__
+
+struct tx3927_sdramc_reg {
+	volatile unsigned long cr[8];
+	volatile unsigned long tr[3];
+	volatile unsigned long cmd;
+	volatile unsigned long smrs[2];
+};
+
+struct tx3927_romc_reg {
+	volatile unsigned long cr[8];
+};
+
+struct tx3927_dma_reg {
+	struct tx3927_dma_ch_reg {
+		volatile unsigned long cha;
+		volatile unsigned long sar;
+		volatile unsigned long dar;
+		volatile unsigned long cntr;
+		volatile unsigned long sair;
+		volatile unsigned long dair;
+		volatile unsigned long ccr;
+		volatile unsigned long csr;
+	} ch[4];
+	volatile unsigned long dbr[8];
+	volatile unsigned long tdhr;
+	volatile unsigned long mcr;
+	volatile unsigned long unused0;
+};
+
+struct tx3927_irc_reg {
+	volatile unsigned long cer;
+	volatile unsigned long cr[2];
+	volatile unsigned long unused0;
+	volatile unsigned long ilr[8];
+	volatile unsigned long unused1[4];
+	volatile unsigned long imr;
+	volatile unsigned long unused2[7];
+	volatile unsigned long scr;
+	volatile unsigned long unused3[7];
+	volatile unsigned long ssr;
+	volatile unsigned long unused4[7];
+	volatile unsigned long csr;
+};
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_s2(e1,e2)	\
+	volatile unsigned short e1,e2
+#define endian_def_sb2(e1,e2,e3)	\
+	volatile unsigned short e1;volatile unsigned char e2,e3
+#define endian_def_b2s(e1,e2,e3)	\
+	volatile unsigned char e1,e2;volatile unsigned short e3
+#define endian_def_b4(e1,e2,e3,e4)	\
+	volatile unsigned char e1,e2,e3,e4
+#else
+#define endian_def_s2(e1,e2)	\
+	volatile unsigned short e2,e1
+#define endian_def_sb2(e1,e2,e3)	\
+	volatile unsigned char e3,e2;volatile unsigned short e1
+#define endian_def_b2s(e1,e2,e3)	\
+	volatile unsigned short e3;volatile unsigned char e2,e1
+#define endian_def_b4(e1,e2,e3,e4)	\
+	volatile unsigned char e4,e3,e2,e1
+#endif
+
+struct tx3927_pcic_reg {
+	endian_def_s2(did, vid);
+	endian_def_s2(pcistat, pcicmd);
+	endian_def_b4(cc, scc, rpli, rid);
+	endian_def_b4(unused0, ht, mlt, cls);
+	volatile unsigned long ioba;		/* +10 */
+	volatile unsigned long mba;
+	volatile unsigned long unused1[5];
+	endian_def_s2(svid, ssvid);
+	volatile unsigned long unused2;		/* +30 */
+	endian_def_sb2(unused3, unused4, capptr);
+	volatile unsigned long unused5;
+	endian_def_b4(ml, mg, ip, il);
+	volatile unsigned long unused6;		/* +40 */
+	volatile unsigned long istat;
+	volatile unsigned long iim;
+	volatile unsigned long rrt;
+	volatile unsigned long unused7[3];		/* +50 */
+	volatile unsigned long ipbmma;
+	volatile unsigned long ipbioma;		/* +60 */
+	volatile unsigned long ilbmma;
+	volatile unsigned long ilbioma;
+	volatile unsigned long unused8[9];
+	volatile unsigned long tc;		/* +90 */
+	volatile unsigned long tstat;
+	volatile unsigned long tim;
+	volatile unsigned long tccmd;
+	volatile unsigned long pcirrt;		/* +a0 */
+	volatile unsigned long pcirrt_cmd;
+	volatile unsigned long pcirrdt;
+	volatile unsigned long unused9[3];
+	volatile unsigned long tlboap;
+	volatile unsigned long tlbiap;
+	volatile unsigned long tlbmma;		/* +c0 */
+	volatile unsigned long tlbioma;
+	volatile unsigned long sc_msg;
+	volatile unsigned long sc_be;
+	volatile unsigned long tbl;		/* +d0 */
+	volatile unsigned long unused10[3];
+	volatile unsigned long pwmng;		/* +e0 */
+	volatile unsigned long pwmngs;
+	volatile unsigned long unused11[6];
+	volatile unsigned long req_trace;		/* +100 */
+	volatile unsigned long pbapmc;
+	volatile unsigned long pbapms;
+	volatile unsigned long pbapmim;
+	volatile unsigned long bm;		/* +110 */
+	volatile unsigned long cpcibrs;
+	volatile unsigned long cpcibgs;
+	volatile unsigned long pbacs;
+	volatile unsigned long iobas;		/* +120 */
+	volatile unsigned long mbas;
+	volatile unsigned long lbc;
+	volatile unsigned long lbstat;
+	volatile unsigned long lbim;		/* +130 */
+	volatile unsigned long pcistatim;
+	volatile unsigned long ica;
+	volatile unsigned long icd;
+	volatile unsigned long iiadp;		/* +140 */
+	volatile unsigned long iscdp;
+	volatile unsigned long mmas;
+	volatile unsigned long iomas;
+	volatile unsigned long ipciaddr;		/* +150 */
+	volatile unsigned long ipcidata;
+	volatile unsigned long ipcibe;
+};
+
+struct tx3927_ccfg_reg {
+	volatile unsigned long ccfg;
+	volatile unsigned long crir;
+	volatile unsigned long pcfg;
+	volatile unsigned long tear;
+	volatile unsigned long pdcr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * SDRAMC
+ */
+
+/*
+ * ROMC
+ */
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX3927_DMA_MCR_EIS(ch)	(0x10000000<<(ch))
+#define TX3927_DMA_MCR_DIS(ch)	(0x01000000<<(ch))
+#define TX3927_DMA_MCR_RSFIF	0x00000080
+#define TX3927_DMA_MCR_FIFUM(ch)	(0x00000008<<(ch))
+#define TX3927_DMA_MCR_LE	0x00000004
+#define TX3927_DMA_MCR_RPRT	0x00000002
+#define TX3927_DMA_MCR_MSTEN	0x00000001
+
+/* bits for CCRn */
+#define TX3927_DMA_CCR_DBINH	0x04000000
+#define TX3927_DMA_CCR_SBINH	0x02000000
+#define TX3927_DMA_CCR_CHRST	0x01000000
+#define TX3927_DMA_CCR_RVBYTE	0x00800000
+#define TX3927_DMA_CCR_ACKPOL	0x00400000
+#define TX3927_DMA_CCR_REQPL	0x00200000
+#define TX3927_DMA_CCR_EGREQ	0x00100000
+#define TX3927_DMA_CCR_CHDN	0x00080000
+#define TX3927_DMA_CCR_DNCTL	0x00060000
+#define TX3927_DMA_CCR_EXTRQ	0x00010000
+#define TX3927_DMA_CCR_INTRQD	0x0000e000
+#define TX3927_DMA_CCR_INTENE	0x00001000
+#define TX3927_DMA_CCR_INTENC	0x00000800
+#define TX3927_DMA_CCR_INTENT	0x00000400
+#define TX3927_DMA_CCR_CHNEN	0x00000200
+#define TX3927_DMA_CCR_XFACT	0x00000100
+#define TX3927_DMA_CCR_SNOP	0x00000080
+#define TX3927_DMA_CCR_DSTINC	0x00000040
+#define TX3927_DMA_CCR_SRCINC	0x00000020
+#define TX3927_DMA_CCR_XFSZ(order)	(((order) << 2) & 0x0000001c)
+#define TX3927_DMA_CCR_XFSZ_1W	TX3927_DMA_CCR_XFSZ(2)
+#define TX3927_DMA_CCR_XFSZ_4W	TX3927_DMA_CCR_XFSZ(4)
+#define TX3927_DMA_CCR_XFSZ_8W	TX3927_DMA_CCR_XFSZ(5)
+#define TX3927_DMA_CCR_XFSZ_16W	TX3927_DMA_CCR_XFSZ(6)
+#define TX3927_DMA_CCR_XFSZ_32W	TX3927_DMA_CCR_XFSZ(7)
+#define TX3927_DMA_CCR_MEMIO	0x00000002
+#define TX3927_DMA_CCR_ONEAD	0x00000001
+
+/* bits for CSRn */
+#define TX3927_DMA_CSR_CHNACT	0x00000100
+#define TX3927_DMA_CSR_ABCHC	0x00000080
+#define TX3927_DMA_CSR_NCHNC	0x00000040
+#define TX3927_DMA_CSR_NTRNFC	0x00000020
+#define TX3927_DMA_CSR_EXTDN	0x00000010
+#define TX3927_DMA_CSR_CFERR	0x00000008
+#define TX3927_DMA_CSR_CHERR	0x00000004
+#define TX3927_DMA_CSR_DESERR	0x00000002
+#define TX3927_DMA_CSR_SORERR	0x00000001
+
+/*
+ * IRC
+ */
+#define TX3927_IR_MAX_LEVEL	7
+
+/* IRCER : Int. Control Enable */
+#define TX3927_IRCER_ICE	0x00000001
+
+/* IRCR : Int. Control */
+#define TX3927_IRCR_LOW	0x00000000
+#define TX3927_IRCR_HIGH	0x00000001
+#define TX3927_IRCR_DOWN	0x00000002
+#define TX3927_IRCR_UP	0x00000003
+
+/* IRSCR : Int. Status Control */
+#define TX3927_IRSCR_EIClrE	0x00000100
+#define TX3927_IRSCR_EIClr_MASK	0x0000000f
+
+/* IRCSR : Int. Current Status */
+#define TX3927_IRCSR_IF	0x00010000
+#define TX3927_IRCSR_ILV_MASK	0x00000700
+#define TX3927_IRCSR_IVL_MASK	0x0000001f
+
+#define TX3927_IR_INT0	0
+#define TX3927_IR_INT1	1
+#define TX3927_IR_INT2	2
+#define TX3927_IR_INT3	3
+#define TX3927_IR_INT4	4
+#define TX3927_IR_INT5	5
+#define TX3927_IR_SIO0	6
+#define TX3927_IR_SIO1	7
+#define TX3927_IR_SIO(ch)	(6 + (ch))
+#define TX3927_IR_DMA	8
+#define TX3927_IR_PIO	9
+#define TX3927_IR_PCI	10
+#define TX3927_IR_TMR0	13
+#define TX3927_IR_TMR1	14
+#define TX3927_IR_TMR2	15
+#define TX3927_NUM_IR	16
+
+/*
+ * PCIC
+ */
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci.h */
+#define PCI_STATUS_NEW_CAP	0x0010
+
+/* bits for TC */
+#define TX3927_PCIC_TC_OF16E	0x00000020
+#define TX3927_PCIC_TC_IF8E	0x00000010
+#define TX3927_PCIC_TC_OF8E	0x00000008
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
+
+/* bits for PBAPMC */
+#define TX3927_PCIC_PBAPMC_RPBA	0x00000004
+#define TX3927_PCIC_PBAPMC_PBAEN	0x00000002
+#define TX3927_PCIC_PBAPMC_BMCEN	0x00000001
+
+/* bits for LBSTAT/LBIM */
+#define TX3927_PCIC_LBIM_ALL	0x0000003e
+
+/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX3927_PCIC_PCISTATIM_ALL	0x0000f900
+
+/* bits for LBC */
+#define TX3927_PCIC_LBC_IBSE	0x00004000
+#define TX3927_PCIC_LBC_TIBSE	0x00002000
+#define TX3927_PCIC_LBC_TMFBSE	0x00001000
+#define TX3927_PCIC_LBC_HRST	0x00000800
+#define TX3927_PCIC_LBC_SRST	0x00000400
+#define TX3927_PCIC_LBC_EPCAD	0x00000200
+#define TX3927_PCIC_LBC_MSDSE	0x00000100
+#define TX3927_PCIC_LBC_CRR	0x00000080
+#define TX3927_PCIC_LBC_ILMDE	0x00000040
+#define TX3927_PCIC_LBC_ILIDE	0x00000020
+
+#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad)	((ad) - 11)
+#define TX3927_PCIC_MAX_DEVNU	TX3927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX3927_CCFG_TLBOFF	0x00020000
+#define TX3927_CCFG_BEOW	0x00010000
+#define TX3927_CCFG_WR	0x00008000
+#define TX3927_CCFG_TOE	0x00004000
+#define TX3927_CCFG_PCIXARB	0x00002000
+#define TX3927_CCFG_PCI3	0x00001000
+#define TX3927_CCFG_PSNP	0x00000800
+#define TX3927_CCFG_PPRI	0x00000400
+#define TX3927_CCFG_PLLM	0x00000030
+#define TX3927_CCFG_ENDIAN	0x00000004
+#define TX3927_CCFG_HALT	0x00000002
+#define TX3927_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX3927_PCFG_SYSCLKEN	0x08000000
+#define TX3927_PCFG_SDRCLKEN_ALL	0x07c00000
+#define TX3927_PCFG_SDRCLKEN(ch)	(0x00400000<<(ch))
+#define TX3927_PCFG_PCICLKEN_ALL	0x003c0000
+#define TX3927_PCFG_PCICLKEN(ch)	(0x00040000<<(ch))
+#define TX3927_PCFG_SELALL	0x0003ffff
+#define TX3927_PCFG_SELCS	0x00020000
+#define TX3927_PCFG_SELDSF	0x00010000
+#define TX3927_PCFG_SELSIOC_ALL	0x0000c000
+#define TX3927_PCFG_SELSIOC(ch)	(0x00004000<<(ch))
+#define TX3927_PCFG_SELSIO_ALL	0x00003000
+#define TX3927_PCFG_SELSIO(ch)	(0x00001000<<(ch))
+#define TX3927_PCFG_SELTMR_ALL	0x00000e00
+#define TX3927_PCFG_SELTMR(ch)	(0x00000200<<(ch))
+#define TX3927_PCFG_SELDONE	0x00000100
+#define TX3927_PCFG_INTDMA_ALL	0x000000f0
+#define TX3927_PCFG_INTDMA(ch)	(0x00000010<<(ch))
+#define TX3927_PCFG_SELDMA_ALL	0x0000000f
+#define TX3927_PCFG_SELDMA(ch)	(0x00000001<<(ch))
+
+#ifndef __ASSEMBLY__
+
+#define tx3927_sdramcptr	((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG)
+#define tx3927_romcptr		((struct tx3927_romc_reg *)TX3927_ROMC_REG)
+#define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
+#define tx3927_ircptr		((struct tx3927_irc_reg *)TX3927_IRC_REG)
+#define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
+#define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
+#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
+#define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
+#define tx3927_pioptr		((struct txx927_pio_reg *)TX3927_PIO_REG)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_TX3927_H */
diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/jmr3927/txx927.h
new file mode 100644
index 000000000000..9d5792eab452
--- /dev/null
+++ b/include/asm-mips/jmr3927/txx927.h
@@ -0,0 +1,175 @@
+/*
+ * Common definitions for TX3927/TX4927
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Toshiba Corporation
+ */
+#ifndef __ASM_TXX927_H
+#define __ASM_TXX927_H
+
+#ifndef __ASSEMBLY__
+
+struct txx927_tmr_reg {
+	volatile unsigned long tcr;
+	volatile unsigned long tisr;
+	volatile unsigned long cpra;
+	volatile unsigned long cprb;
+	volatile unsigned long itmr;
+	volatile unsigned long unused0[3];
+	volatile unsigned long ccdr;
+	volatile unsigned long unused1[3];
+	volatile unsigned long pgmr;
+	volatile unsigned long unused2[3];
+	volatile unsigned long wtmr;
+	volatile unsigned long unused3[43];
+	volatile unsigned long trr;
+};
+
+struct txx927_sio_reg {
+	volatile unsigned long lcr;
+	volatile unsigned long dicr;
+	volatile unsigned long disr;
+	volatile unsigned long cisr;
+	volatile unsigned long fcr;
+	volatile unsigned long flcr;
+	volatile unsigned long bgr;
+	volatile unsigned long tfifo;
+	volatile unsigned long rfifo;
+};
+
+struct txx927_pio_reg {
+	volatile unsigned long dout;
+	volatile unsigned long din;
+	volatile unsigned long dir;
+	volatile unsigned long od;
+	volatile unsigned long flag[2];
+	volatile unsigned long pol;
+	volatile unsigned long intc;
+	volatile unsigned long maskcpu;
+	volatile unsigned long maskext;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * TMR
+ */
+/* TMTCR : Timer Control */
+#define TXx927_TMTCR_TCE	0x00000080
+#define TXx927_TMTCR_CCDE	0x00000040
+#define TXx927_TMTCR_CRE	0x00000020
+#define TXx927_TMTCR_ECES	0x00000008
+#define TXx927_TMTCR_CCS	0x00000004
+#define TXx927_TMTCR_TMODE_MASK	0x00000003
+#define TXx927_TMTCR_TMODE_ITVL	0x00000000
+
+/* TMTISR : Timer Int. Status */
+#define TXx927_TMTISR_TPIBS	0x00000004
+#define TXx927_TMTISR_TPIAS	0x00000002
+#define TXx927_TMTISR_TIIS	0x00000001
+
+/* TMTITMR : Interval Timer Mode */
+#define TXx927_TMTITMR_TIIE	0x00008000
+#define TXx927_TMTITMR_TZCE	0x00000001
+
+/*
+ * SIO
+ */
+/* SILCR : Line Control */
+#define TXx927_SILCR_SCS_MASK	0x00000060
+#define TXx927_SILCR_SCS_IMCLK	0x00000000
+#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
+#define TXx927_SILCR_SCS_SCLK	0x00000040
+#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
+#define TXx927_SILCR_UEPS	0x00000010
+#define TXx927_SILCR_UPEN	0x00000008
+#define TXx927_SILCR_USBL_MASK	0x00000004
+#define TXx927_SILCR_USBL_1BIT	0x00000004
+#define TXx927_SILCR_USBL_2BIT	0x00000000
+#define TXx927_SILCR_UMODE_MASK	0x00000003
+#define TXx927_SILCR_UMODE_8BIT	0x00000000
+#define TXx927_SILCR_UMODE_7BIT	0x00000001
+
+/* SIDICR : DMA/Int. Control */
+#define TXx927_SIDICR_TDE	0x00008000
+#define TXx927_SIDICR_RDE	0x00004000
+#define TXx927_SIDICR_TIE	0x00002000
+#define TXx927_SIDICR_RIE	0x00001000
+#define TXx927_SIDICR_SPIE	0x00000800
+#define TXx927_SIDICR_CTSAC	0x00000600
+#define TXx927_SIDICR_STIE_MASK	0x0000003f
+#define TXx927_SIDICR_STIE_OERS		0x00000020
+#define TXx927_SIDICR_STIE_CTSS		0x00000010
+#define TXx927_SIDICR_STIE_RBRKD	0x00000008
+#define TXx927_SIDICR_STIE_TRDY		0x00000004
+#define TXx927_SIDICR_STIE_TXALS	0x00000002
+#define TXx927_SIDICR_STIE_UBRKD	0x00000001
+
+/* SIDISR : DMA/Int. Status */
+#define TXx927_SIDISR_UBRK	0x00008000
+#define TXx927_SIDISR_UVALID	0x00004000
+#define TXx927_SIDISR_UFER	0x00002000
+#define TXx927_SIDISR_UPER	0x00001000
+#define TXx927_SIDISR_UOER	0x00000800
+#define TXx927_SIDISR_ERI	0x00000400
+#define TXx927_SIDISR_TOUT	0x00000200
+#define TXx927_SIDISR_TDIS	0x00000100
+#define TXx927_SIDISR_RDIS	0x00000080
+#define TXx927_SIDISR_STIS	0x00000040
+#define TXx927_SIDISR_RFDN_MASK	0x0000001f
+
+/* SICISR : Change Int. Status */
+#define TXx927_SICISR_OERS	0x00000020
+#define TXx927_SICISR_CTSS	0x00000010
+#define TXx927_SICISR_RBRKD	0x00000008
+#define TXx927_SICISR_TRDY	0x00000004
+#define TXx927_SICISR_TXALS	0x00000002
+#define TXx927_SICISR_UBRKD	0x00000001
+
+/* SIFCR : FIFO Control */
+#define TXx927_SIFCR_SWRST	0x00008000
+#define TXx927_SIFCR_RDIL_MASK	0x00000180
+#define TXx927_SIFCR_RDIL_1	0x00000000
+#define TXx927_SIFCR_RDIL_4	0x00000080
+#define TXx927_SIFCR_RDIL_8	0x00000100
+#define TXx927_SIFCR_RDIL_12	0x00000180
+#define TXx927_SIFCR_RDIL_MAX	0x00000180
+#define TXx927_SIFCR_TDIL_MASK	0x00000018
+#define TXx927_SIFCR_TDIL_MASK	0x00000018
+#define TXx927_SIFCR_TDIL_1	0x00000000
+#define TXx927_SIFCR_TDIL_4	0x00000001
+#define TXx927_SIFCR_TDIL_8	0x00000010
+#define TXx927_SIFCR_TDIL_MAX	0x00000010
+#define TXx927_SIFCR_TFRST	0x00000004
+#define TXx927_SIFCR_RFRST	0x00000002
+#define TXx927_SIFCR_FRSTE	0x00000001
+#define TXx927_SIO_TX_FIFO	8
+#define TXx927_SIO_RX_FIFO	16
+
+/* SIFLCR : Flow Control */
+#define TXx927_SIFLCR_RCS	0x00001000
+#define TXx927_SIFLCR_TES	0x00000800
+#define TXx927_SIFLCR_RTSSC	0x00000200
+#define TXx927_SIFLCR_RSDE	0x00000100
+#define TXx927_SIFLCR_TSDE	0x00000080
+#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
+#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
+#define TXx927_SIFLCR_TBRK	0x00000001
+
+/* SIBGR : Baudrate Control */
+#define TXx927_SIBGR_BCLK_MASK	0x00000300
+#define TXx927_SIBGR_BCLK_T0	0x00000000
+#define TXx927_SIBGR_BCLK_T2	0x00000100
+#define TXx927_SIBGR_BCLK_T4	0x00000200
+#define TXx927_SIBGR_BCLK_T6	0x00000300
+#define TXx927_SIBGR_BRD_MASK	0x000000ff
+
+/*
+ * PIO
+ */
+
+#endif /* __ASM_TXX927_H */
diff --git a/include/asm-mips/kmap_types.h b/include/asm-mips/kmap_types.h
new file mode 100644
index 000000000000..6886a0c3fedf
--- /dev/null
+++ b/include/asm-mips/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-mips/lasat/ds1603.h b/include/asm-mips/lasat/ds1603.h
new file mode 100644
index 000000000000..edcd7544b358
--- /dev/null
+++ b/include/asm-mips/lasat/ds1603.h
@@ -0,0 +1,18 @@
+#include <asm/addrspace.h>
+
+/* Lasat 100	*/
+#define DS1603_REG_100		(KSEG1ADDR(0x1c810000))
+#define DS1603_RST_100		(1 << 2)
+#define DS1603_CLK_100		(1 << 0)
+#define DS1603_DATA_SHIFT_100	1
+#define DS1603_DATA_100		(1 << DS1603_DATA_SHIFT_100)
+
+/* Lasat 200	*/
+#define DS1603_REG_200		(KSEG1ADDR(0x11000000))
+#define DS1603_RST_200		(1 << 3)
+#define DS1603_CLK_200		(1 << 4)
+#define DS1603_DATA_200		(1 << 5)
+
+#define DS1603_DATA_REG_200		(DS1603_REG_200 + 0x10000)
+#define DS1603_DATA_READ_SHIFT_200	9
+#define DS1603_DATA_READ_200	(1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/include/asm-mips/lasat/eeprom.h b/include/asm-mips/lasat/eeprom.h
new file mode 100644
index 000000000000..7b53edd5cd5f
--- /dev/null
+++ b/include/asm-mips/lasat/eeprom.h
@@ -0,0 +1,17 @@
+#include <asm/addrspace.h>
+
+/* lasat 100 */
+#define AT93C_REG_100               KSEG1ADDR(0x1c810000)
+#define AT93C_RDATA_REG_100         AT93C_REG_100
+#define AT93C_RDATA_SHIFT_100       4
+#define AT93C_WDATA_SHIFT_100       4
+#define AT93C_CS_M_100              ( 1 << 5 )
+#define AT93C_CLK_M_100             ( 1 << 3 )
+
+/* lasat 200 */
+#define AT93C_REG_200		KSEG1ADDR(0x11000000)
+#define AT93C_RDATA_REG_200	(AT93C_REG_200+0x10000)
+#define AT93C_RDATA_SHIFT_200	8
+#define AT93C_WDATA_SHIFT_200	2
+#define AT93C_CS_M_200		( 1 << 0 )
+#define AT93C_CLK_M_200		( 1 << 1 )
diff --git a/include/asm-mips/lasat/head.h b/include/asm-mips/lasat/head.h
new file mode 100644
index 000000000000..f5589f31a197
--- /dev/null
+++ b/include/asm-mips/lasat/head.h
@@ -0,0 +1,22 @@
+/*
+ * Image header stuff
+ */
+#ifndef _HEAD_H
+#define _HEAD_H
+
+#define LASAT_K_MAGIC0_VAL	0xfedeabba
+#define LASAT_K_MAGIC1_VAL	0x00bedead
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <linux/types.h>
+struct bootloader_header {
+	u32 magic[2];
+	u32 version;
+	u32 image_start;
+	u32 image_size;
+	u32 kernel_start;
+	u32 kernel_entry;
+};
+#endif
+
+#endif /* _HEAD_H */
diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h
new file mode 100644
index 000000000000..181afc5c0f1d
--- /dev/null
+++ b/include/asm-mips/lasat/lasat.h
@@ -0,0 +1,255 @@
+/*
+ * lasat.h
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Configuration for LASAT boards, loads the appropriate include files.
+ */
+#ifndef _LASAT_H
+#define _LASAT_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern struct lasat_misc {
+	volatile u32 *reset_reg;
+	volatile u32 *flash_wp_reg;
+	u32 flash_wp_bit;
+} *lasat_misc;
+
+enum lasat_mtdparts {
+	LASAT_MTD_BOOTLOADER,
+	LASAT_MTD_SERVICE,
+	LASAT_MTD_NORMAL,
+	LASAT_MTD_CONFIG,
+	LASAT_MTD_FS,
+	LASAT_MTD_LAST
+};
+
+/*
+ * The format of the data record in the EEPROM.
+ * See Documentation/LASAT/eeprom.txt for a detailed description
+ * of the fields in this struct, and the LASAT Hardware Configuration
+ * field specification for a detailed description of the config
+ * field.
+ */
+#include <linux/types.h>
+
+#define LASAT_EEPROM_VERSION 7
+struct lasat_eeprom_struct {
+	unsigned int  version;
+	unsigned int  cfg[3];
+	unsigned char hwaddr[6];
+	unsigned char print_partno[12];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[12];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[16];
+	unsigned char pwdnull;
+	unsigned char vendid;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[11];
+	unsigned char debugaccess;
+	unsigned short prid;
+	unsigned int  serviceflag;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+struct lasat_eeprom_struct_pre7 {
+	unsigned int  version;
+	unsigned int  flags[3];
+	unsigned char hwaddr0[6];
+	unsigned char hwaddr1[6];
+	unsigned char print_partno[9];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[9];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[24];
+	unsigned char pwdnull;
+	unsigned char vendor;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[6];
+	unsigned int  writecount;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+/* Configuration descriptor encoding - see the doc for details */
+
+#define LASAT_W0_DSCTYPE(v)		( ( (v)         ) & 0xf )
+#define LASAT_W0_BMID(v)		( ( (v) >> 0x04 ) & 0xf )
+#define LASAT_W0_CPUTYPE(v)		( ( (v) >> 0x08 ) & 0xf )
+#define LASAT_W0_BUSSPEED(v)		( ( (v) >> 0x0c ) & 0xf )
+#define LASAT_W0_CPUCLK(v)		( ( (v) >> 0x10 ) & 0xf )
+#define LASAT_W0_SDRAMBANKSZ(v)		( ( (v) >> 0x14 ) & 0xf )
+#define LASAT_W0_SDRAMBANKS(v)		( ( (v) >> 0x18 ) & 0xf )
+#define LASAT_W0_L2CACHE(v)		( ( (v) >> 0x1c ) & 0xf )
+
+#define LASAT_W1_EDHAC(v)		( ( (v)         ) & 0xf )
+#define LASAT_W1_HIFN(v)		( ( (v) >> 0x04 ) & 0x1 )
+#define LASAT_W1_ISDN(v)		( ( (v) >> 0x05 ) & 0x1 )
+#define LASAT_W1_IDE(v)			( ( (v) >> 0x06 ) & 0x1 )
+#define LASAT_W1_HDLC(v)		( ( (v) >> 0x07 ) & 0x1 )
+#define LASAT_W1_USVERSION(v)		( ( (v) >> 0x08 ) & 0x1 )
+#define LASAT_W1_4MACS(v)		( ( (v) >> 0x09 ) & 0x1 )
+#define LASAT_W1_EXTSERIAL(v)		( ( (v) >> 0x0a ) & 0x1 )
+#define LASAT_W1_FLASHSIZE(v)		( ( (v) >> 0x0c ) & 0xf )
+#define LASAT_W1_PCISLOTS(v)		( ( (v) >> 0x10 ) & 0xf )
+#define LASAT_W1_PCI1OPT(v)		( ( (v) >> 0x14 ) & 0xf )
+#define LASAT_W1_PCI2OPT(v)		( ( (v) >> 0x18 ) & 0xf )
+#define LASAT_W1_PCI3OPT(v)		( ( (v) >> 0x1c ) & 0xf )
+
+/* Routines specific to LASAT boards */
+
+#define LASAT_BMID_MASQUERADE2		0
+#define LASAT_BMID_MASQUERADEPRO	1
+#define LASAT_BMID_SAFEPIPE25			2
+#define LASAT_BMID_SAFEPIPE50			3
+#define LASAT_BMID_SAFEPIPE100		4
+#define LASAT_BMID_SAFEPIPE5000		5
+#define LASAT_BMID_SAFEPIPE7000		6
+#define LASAT_BMID_SAFEPIPE1000		7
+//#define LASAT_BMID_SAFEPIPE30		7
+//#define LASAT_BMID_SAFEPIPE5100	8
+//#define LASAT_BMID_SAFEPIPE7100	9
+#define LASAT_BMID_UNKNOWN				0xf
+#define LASAT_MAX_BMID_NAMES			9   // no larger than 15!
+
+#define LASAT_HAS_EDHAC			( 1 << 0 )
+#define LASAT_EDHAC_FAST		( 1 << 1 )
+#define LASAT_HAS_EADI			( 1 << 2 )
+#define LASAT_HAS_HIFN			( 1 << 3 )
+#define LASAT_HAS_ISDN			( 1 << 4 )
+#define LASAT_HAS_LEASEDLINE_IF		( 1 << 5 )
+#define LASAT_HAS_HDC			( 1 << 6 )
+
+#define LASAT_PRID_MASQUERADE2		0
+#define LASAT_PRID_MASQUERADEPRO	1
+#define LASAT_PRID_SAFEPIPE25			2
+#define LASAT_PRID_SAFEPIPE50			3
+#define LASAT_PRID_SAFEPIPE100		4
+#define LASAT_PRID_SAFEPIPE5000		5
+#define LASAT_PRID_SAFEPIPE7000		6
+#define LASAT_PRID_SAFEPIPE30			7
+#define LASAT_PRID_SAFEPIPE5100		8
+#define LASAT_PRID_SAFEPIPE7100		9
+
+#define LASAT_PRID_SAFEPIPE1110		10
+#define LASAT_PRID_SAFEPIPE3020		11
+#define LASAT_PRID_SAFEPIPE3030		12
+#define LASAT_PRID_SAFEPIPE5020		13
+#define LASAT_PRID_SAFEPIPE5030		14
+#define LASAT_PRID_SAFEPIPE1120		15
+#define LASAT_PRID_SAFEPIPE1130		16
+#define LASAT_PRID_SAFEPIPE6010		17
+#define LASAT_PRID_SAFEPIPE6110		18
+#define LASAT_PRID_SAFEPIPE6210		19
+#define LASAT_PRID_SAFEPIPE1020		20
+#define LASAT_PRID_SAFEPIPE1040		21
+#define LASAT_PRID_SAFEPIPE1060		22
+
+struct lasat_info {
+	unsigned int  li_cpu_hz;
+	unsigned int  li_bus_hz;
+	unsigned int  li_bmid;
+	unsigned int  li_memsize;
+	unsigned int  li_flash_size;
+	unsigned int  li_prid;
+	unsigned char li_bmstr[16];
+	unsigned char li_namestr[32];
+	unsigned char li_typestr[16];
+	/* Info on the Flash layout */
+	unsigned int  li_flash_base;
+	unsigned long li_flashpart_base[LASAT_MTD_LAST];
+	unsigned long li_flashpart_size[LASAT_MTD_LAST];
+	struct lasat_eeprom_struct li_eeprom_info;
+	unsigned int  li_eeprom_upgrade_version;
+	unsigned int  li_debugaccess;
+};
+
+extern struct lasat_info lasat_board_info;
+
+static inline unsigned long lasat_flash_partition_start(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_base[partno];
+}
+
+static inline unsigned long lasat_flash_partition_size(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_size[partno];
+}
+
+/* Called from setup() to initialize the global board_info struct */
+extern int lasat_init_board_info(void);
+
+/* Write the modified EEPROM info struct */
+extern void lasat_write_eeprom_info(void);
+
+#define N_MACHTYPES		2
+/* for calibration of delays */
+
+/* the lasat_ndelay function is necessary because it is used at an
+ * early stage of the boot process where ndelay is not calibrated.
+ * It is used for the bit-banging rtc and eeprom drivers */
+
+#include <asm/delay.h>
+/* calculating with the slowest board with 100 MHz clock */
+#define LASAT_100_DIVIDER 20
+/* All 200's run at 250 MHz clock */
+#define LASAT_200_DIVIDER 8
+
+extern unsigned int lasat_ndelay_divider;
+
+static inline void lasat_ndelay(unsigned int ns)
+{
+            __delay(ns / lasat_ndelay_divider);
+}
+
+extern void (* prom_printf)(const char *fmt, ...);
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#define LASAT_SERVICEMODE_MAGIC_1     0xdeadbeef
+#define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
+
+/* Lasat 100 boards */
+#define LASAT_GT_BASE           (KSEG1ADDR(0x14000000))
+
+/* Lasat 200 boards */
+#define Vrc5074_PHYS_BASE       0x1fa00000
+#define Vrc5074_BASE            (KSEG1ADDR(Vrc5074_PHYS_BASE))
+#define PCI_WINDOW1             0x1a000000
+
+#endif /* _LASAT_H */
diff --git a/include/asm-mips/lasat/lasatint.h b/include/asm-mips/lasat/lasatint.h
new file mode 100644
index 000000000000..065474feeccc
--- /dev/null
+++ b/include/asm-mips/lasat/lasatint.h
@@ -0,0 +1,12 @@
+#define LASATINT_END 16
+
+/* lasat 100 */
+#define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
+#define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
+#define LASATINT_MASK_SHIFT_100		0
+
+/* lasat 200 */
+#define LASAT_INT_STATUS_REG_200	(KSEG1ADDR(0x1104003c))
+#define LASAT_INT_MASK_REG_200		(KSEG1ADDR(0x1104003c))
+#define LASATINT_MASK_SHIFT_200		16
+
diff --git a/include/asm-mips/lasat/picvue.h b/include/asm-mips/lasat/picvue.h
new file mode 100644
index 000000000000..42a492edc40e
--- /dev/null
+++ b/include/asm-mips/lasat/picvue.h
@@ -0,0 +1,15 @@
+/* Lasat 100 */
+#define PVC_REG_100		KSEG1ADDR(0x1c820000)
+#define PVC_DATA_SHIFT_100	0
+#define PVC_DATA_M_100		0xFF
+#define PVC_E_100		(1 << 8)
+#define PVC_RW_100		(1 << 9)
+#define PVC_RS_100		(1 << 10)
+
+/* Lasat 200 */
+#define PVC_REG_200		KSEG1ADDR(0x11000000)
+#define PVC_DATA_SHIFT_200	24
+#define PVC_DATA_M_200		(0xFF << PVC_DATA_SHIFT_200)
+#define PVC_E_200		(1 << 16)
+#define PVC_RW_200		(1 << 17)
+#define PVC_RS_200		(1 << 18)
diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
new file mode 100644
index 000000000000..21d0fb7cee64
--- /dev/null
+++ b/include/asm-mips/lasat/serial.h
@@ -0,0 +1,13 @@
+#include <asm/lasat/lasat.h>
+
+/* Lasat 100 boards serial configuration */
+#define LASAT_BASE_BAUD_100 		( 7372800 / 16 ) 
+#define LASAT_UART_REGS_BASE_100	0x1c8b0000
+#define LASAT_UART_REGS_SHIFT_100	2
+#define LASATINT_UART_100		8
+
+/* * LASAT 200 boards serial configuration */
+#define LASAT_BASE_BAUD_200		(100000000 / 16 / 12) 
+#define LASAT_UART_REGS_BASE_200	(Vrc5074_PHYS_BASE + 0x0300)
+#define LASAT_UART_REGS_SHIFT_200	3
+#define LASATINT_UART_200		13
diff --git a/include/asm-mips/linkage.h b/include/asm-mips/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-mips/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-mips/local.h b/include/asm-mips/local.h
new file mode 100644
index 000000000000..7eb6bf661b80
--- /dev/null
+++ b/include/asm-mips/local.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <linux/config.h>
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_MIPS32
+
+typedef atomic_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC_INIT(i)
+#define local_read(v)	atomic_read(v)
+#define local_set(v,i)	atomic_set(v,i)
+
+#define local_inc(v)	atomic_inc(v)
+#define local_dec(v)	atomic_dec(v)
+#define local_add(i, v)	atomic_add(i, v)
+#define local_sub(i, v)	atomic_sub(i, v)
+
+#endif
+
+#ifdef CONFIG_MIPS64
+
+typedef atomic64_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC64_INIT(i)
+#define local_read(v)	atomic64_read(v)
+#define local_set(v,i)	atomic64_set(v,i)
+
+#define local_inc(v)	atomic64_inc(v)
+#define local_dec(v)	atomic64_dec(v)
+#define local_add(i, v)	atomic64_add(i, v)
+#define local_sub(i, v)	atomic64_sub(i, v)
+
+#endif
+
+#define __local_inc(v)		((v)->counter++)
+#define __local_dec(v)		((v)->counter--)
+#define __local_add(i,v)	((v)->counter+=(i))
+#define __local_sub(i,v)	((v)->counter-=(i))
+
+/*
+ * Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ASM_LOCAL_H */
diff --git a/include/asm-mips/m48t35.h b/include/asm-mips/m48t35.h
new file mode 100644
index 000000000000..f44852e9a96d
--- /dev/null
+++ b/include/asm-mips/m48t35.h
@@ -0,0 +1,27 @@
+/*
+ *  Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T35_H
+#define _ASM_M48T35_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t35_rtc {
+	volatile u8	pad[0x7ff8];    /* starts at 0x7ff8 */
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T35_RTC_SET		0x80
+#define M48T35_RTC_STOPPED	0x80
+#define M48T35_RTC_READ		0x40
+
+#endif /* _ASM_M48T35_H */
diff --git a/include/asm-mips/m48t37.h b/include/asm-mips/m48t37.h
new file mode 100644
index 000000000000..cabf86264f36
--- /dev/null
+++ b/include/asm-mips/m48t37.h
@@ -0,0 +1,35 @@
+/*
+ *  Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T37_H
+#define _ASM_M48T37_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t37_rtc {
+	volatile u8	pad[0x7ff0];    /* NVRAM */
+	volatile u8	flags;
+	volatile u8	century;
+	volatile u8	alarm_sec;
+	volatile u8	alarm_min;
+	volatile u8	alarm_hour;
+	volatile u8	alarm_data;
+	volatile u8	interrupts;
+	volatile u8	watchdog;
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T37_RTC_SET		0x80
+#define M48T37_RTC_STOPPED	0x80
+#define M48T37_RTC_READ		0x40
+
+#endif /* _ASM_M48T37_H */
diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h
new file mode 100644
index 000000000000..397522ea5565
--- /dev/null
+++ b/include/asm-mips/mach-atlas/mc146818rtc.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 1999, 2000, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2003, 05 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef __ASM_MACH_ATLAS_MC146818RTC_H
+#define __ASM_MACH_ATLAS_MC146818RTC_H
+
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mips-boards/atlas.h>
+#include <asm/mips-boards/atlasint.h>
+
+#define RTC_PORT(x)	(ATLAS_RTC_ADR_REG + (x) * 8)
+#define RTC_IO_EXTENT	0x100
+#define RTC_IOMAPPED	0
+#define RTC_IRQ		ATLASINT_RTC
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
+	volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
+
+	*ireg = addr;
+	return *dreg;
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0));
+	volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1));
+
+	*ireg = addr;
+	*dreg = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+
+#endif /* __ASM_MACH_ATLAS_MC146818RTC_H */
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
new file mode 100644
index 000000000000..2b36ea346910
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -0,0 +1,1408 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+  * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+  */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+#include <linux/config.h>
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <asm/io.h>
+
+/* cpu pipeline flush */
+void static inline au_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+void static inline au_sync_udelay(int us)
+{
+	__asm__ volatile ("sync");
+	udelay(us);
+}
+
+void static inline au_sync_delay(int ms)
+{
+	__asm__ volatile ("sync");
+	mdelay(ms);
+}
+
+void static inline au_writeb(u8 val, int reg)
+{
+	*(volatile u8 *)(reg) = val;
+}
+
+void static inline au_writew(u16 val, int reg)
+{
+	*(volatile u16 *)(reg) = val;
+}
+
+void static inline au_writel(u32 val, int reg)
+{
+	*(volatile u32 *)(reg) = val;
+}
+
+static inline u8 au_readb(unsigned long port)
+{
+	return (*(volatile u8 *)port);
+}
+
+static inline u16 au_readw(unsigned long port)
+{
+	return (*(volatile u16 *)port);
+}
+
+static inline u32 au_readl(unsigned long port)
+{
+	return (*(volatile u32 *)port);
+}
+
+/* These next three functions should be a generic part of the MIPS
+ * kernel (with the 'au_' removed from the name) and selected for
+ * processors that support the instructions.
+ * Taken from PPC tree.  -- Dan
+ */
+/* Return the bit position of the most significant 1 bit in a word */
+static __inline__ int __ilog2(unsigned int x)
+{
+	int lz;
+
+	asm volatile (
+		".set\tnoreorder\n\t"
+		".set\tnoat\n\t"
+		".set\tmips32\n\t"
+		"clz\t%0,%1\n\t"
+		".set\tmips0\n\t"
+		".set\tat\n\t"
+		".set\treorder"
+		: "=r" (lz)
+		: "r" (x));
+
+	return 31 - lz;
+}
+
+static __inline__ int au_ffz(unsigned int x)
+{
+	if ((x = ~x) == 0)
+		return 32;
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int au_ffs(int x)
+{
+	return __ilog2(x & -x) + 1;
+}
+
+/* arch/mips/au1000/common/clocks.c */
+extern void set_au1x00_speed(unsigned int new_freq);
+extern unsigned int get_au1x00_speed(void);
+extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern void set_au1x00_lcd_clock(void);
+extern unsigned int get_au1x00_lcd_clock(void);
+
+/*
+ * Every board describes its IRQ mapping with this table.
+ */
+typedef struct au1xxx_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_request;
+} au1xxx_irq_map_t;
+
+/*
+ * init_IRQ looks for a table with this name.
+ */
+extern au1xxx_irq_map_t au1xxx_irq_map[];
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#ifdef CONFIG_PM
+/* no CP0 timer irq */
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+#else
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
+#endif
+
+/* SDRAM Controller */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0                0xB4000000
+#define MEM_SDMODE1                0xB4000004
+#define MEM_SDMODE2                0xB4000008
+
+#define MEM_SDADDR0                0xB400000C
+#define MEM_SDADDR1                0xB4000010
+#define MEM_SDADDR2                0xB4000014
+
+#define MEM_SDREFCFG               0xB4000018
+#define MEM_SDPRECMD               0xB400001C
+#define MEM_SDAUTOREF              0xB4000020
+
+#define MEM_SDWRMD0                0xB4000024
+#define MEM_SDWRMD1                0xB4000028
+#define MEM_SDWRMD2                0xB400002C
+
+#define MEM_SDSLEEP                0xB4000030
+#define MEM_SDSMCKE                0xB4000034
+#endif
+
+/* Static Bus Controller */
+#define MEM_STCFG0                 0xB4001000
+#define MEM_STTIME0                0xB4001004
+#define MEM_STADDR0                0xB4001008
+
+#define MEM_STCFG1                 0xB4001010
+#define MEM_STTIME1                0xB4001014
+#define MEM_STADDR1                0xB4001018
+
+#define MEM_STCFG2                 0xB4001020
+#define MEM_STTIME2                0xB4001024
+#define MEM_STADDR2                0xB4001028
+
+#define MEM_STCFG3                 0xB4001030
+#define MEM_STTIME3                0xB4001034
+#define MEM_STADDR3                0xB4001038
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_STNDCTL                0xB4001100
+#define MEM_STSTAT                 0xB4001104
+
+#define MEM_STNAND_CMD                  (0x0)
+#define MEM_STNAND_ADDR                 (0x4)
+#define MEM_STNAND_DATA                (0x20)
+#endif
+
+/* Interrupt Controller 0 */
+#define IC0_CFG0RD                 0xB0400040
+#define IC0_CFG0SET                0xB0400040
+#define IC0_CFG0CLR                0xB0400044
+
+#define IC0_CFG1RD                 0xB0400048
+#define IC0_CFG1SET                0xB0400048
+#define IC0_CFG1CLR                0xB040004C
+
+#define IC0_CFG2RD                 0xB0400050
+#define IC0_CFG2SET                0xB0400050
+#define IC0_CFG2CLR                0xB0400054
+
+#define IC0_REQ0INT                0xB0400054
+#define IC0_SRCRD                  0xB0400058
+#define IC0_SRCSET                 0xB0400058
+#define IC0_SRCCLR                 0xB040005C
+#define IC0_REQ1INT                0xB040005C
+
+#define IC0_ASSIGNRD               0xB0400060
+#define IC0_ASSIGNSET              0xB0400060
+#define IC0_ASSIGNCLR              0xB0400064
+
+#define IC0_WAKERD                 0xB0400068
+#define IC0_WAKESET                0xB0400068
+#define IC0_WAKECLR                0xB040006C
+
+#define IC0_MASKRD                 0xB0400070
+#define IC0_MASKSET                0xB0400070
+#define IC0_MASKCLR                0xB0400074
+
+#define IC0_RISINGRD               0xB0400078
+#define IC0_RISINGCLR              0xB0400078
+#define IC0_FALLINGRD              0xB040007C
+#define IC0_FALLINGCLR             0xB040007C
+
+#define IC0_TESTBIT                0xB0400080
+
+/* Interrupt Controller 1 */
+#define IC1_CFG0RD                 0xB1800040
+#define IC1_CFG0SET                0xB1800040
+#define IC1_CFG0CLR                0xB1800044
+
+#define IC1_CFG1RD                 0xB1800048
+#define IC1_CFG1SET                0xB1800048
+#define IC1_CFG1CLR                0xB180004C
+
+#define IC1_CFG2RD                 0xB1800050
+#define IC1_CFG2SET                0xB1800050
+#define IC1_CFG2CLR                0xB1800054
+
+#define IC1_REQ0INT                0xB1800054
+#define IC1_SRCRD                  0xB1800058
+#define IC1_SRCSET                 0xB1800058
+#define IC1_SRCCLR                 0xB180005C
+#define IC1_REQ1INT                0xB180005C
+
+#define IC1_ASSIGNRD               0xB1800060
+#define IC1_ASSIGNSET              0xB1800060
+#define IC1_ASSIGNCLR              0xB1800064
+
+#define IC1_WAKERD                 0xB1800068
+#define IC1_WAKESET                0xB1800068
+#define IC1_WAKECLR                0xB180006C
+
+#define IC1_MASKRD                 0xB1800070
+#define IC1_MASKSET                0xB1800070
+#define IC1_MASKCLR                0xB1800074
+
+#define IC1_RISINGRD               0xB1800078
+#define IC1_RISINGCLR              0xB1800078
+#define IC1_FALLINGRD              0xB180007C
+#define IC1_FALLINGCLR             0xB180007C
+
+#define IC1_TESTBIT                0xB1800080
+
+/* Interrupt Configuration Modes */
+#define INTC_INT_DISABLED                0
+#define INTC_INT_RISE_EDGE             0x1
+#define INTC_INT_FALL_EDGE             0x2
+#define INTC_INT_RISE_AND_FALL_EDGE    0x3
+#define INTC_INT_HIGH_LEVEL            0x5
+#define INTC_INT_LOW_LEVEL             0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL    0x7
+
+/* Interrupt Numbers */
+/* Au1000 */
+#ifdef CONFIG_SOC_AU1000
+#define AU1000_UART0_INT          0
+#define AU1000_UART1_INT          1 /* au1000 */
+#define AU1000_UART2_INT          2 /* au1000 */
+#define AU1000_UART3_INT          3
+#define AU1000_SSI0_INT           4 /* au1000 */
+#define AU1000_SSI1_INT           5 /* au1000 */
+#define AU1000_DMA_INT_BASE       6
+#define AU1000_TOY_INT            14
+#define AU1000_TOY_MATCH0_INT     15
+#define AU1000_TOY_MATCH1_INT     16
+#define AU1000_TOY_MATCH2_INT     17
+#define AU1000_RTC_INT            18
+#define AU1000_RTC_MATCH0_INT     19
+#define AU1000_RTC_MATCH1_INT     20
+#define AU1000_RTC_MATCH2_INT     21
+#define AU1000_IRDA_TX_INT        22 /* au1000 */
+#define AU1000_IRDA_RX_INT        23 /* au1000 */
+#define AU1000_USB_DEV_REQ_INT    24
+#define AU1000_USB_DEV_SUS_INT    25
+#define AU1000_USB_HOST_INT       26
+#define AU1000_ACSYNC_INT         27
+#define AU1000_MAC0_DMA_INT       28
+#define AU1000_MAC1_DMA_INT       29
+#define AU1000_I2S_UO_INT         30 /* au1000 */
+#define AU1000_AC97C_INT          31
+#define AU1000_GPIO_0             32
+#define AU1000_GPIO_1             33
+#define AU1000_GPIO_2             34
+#define AU1000_GPIO_3             35
+#define AU1000_GPIO_4             36
+#define AU1000_GPIO_5             37
+#define AU1000_GPIO_6             38
+#define AU1000_GPIO_7             39
+#define AU1000_GPIO_8             40
+#define AU1000_GPIO_9             41
+#define AU1000_GPIO_10            42
+#define AU1000_GPIO_11            43
+#define AU1000_GPIO_12            44
+#define AU1000_GPIO_13            45
+#define AU1000_GPIO_14            46
+#define AU1000_GPIO_15            47
+#define AU1000_GPIO_16            48
+#define AU1000_GPIO_17            49
+#define AU1000_GPIO_18            50
+#define AU1000_GPIO_19            51
+#define AU1000_GPIO_20            52
+#define AU1000_GPIO_21            53
+#define AU1000_GPIO_22            54
+#define AU1000_GPIO_23            55
+#define AU1000_GPIO_24            56
+#define AU1000_GPIO_25            57
+#define AU1000_GPIO_26            58
+#define AU1000_GPIO_27            59
+#define AU1000_GPIO_28            60
+#define AU1000_GPIO_29            61
+#define AU1000_GPIO_30            62
+#define AU1000_GPIO_31            63
+
+#define UART0_ADDR                0xB1100000
+#define UART1_ADDR                0xB1200000
+#define UART2_ADDR                0xB1300000
+#define UART3_ADDR                0xB1400000
+
+#define USB_OHCI_BASE             0x10100000 // phys addr for ioremap
+#define USB_HOST_CONFIG           0xB017fffc
+
+#define AU1000_ETH0_BASE      0xB0500000
+#define AU1000_ETH1_BASE      0xB0510000
+#define AU1000_MAC0_ENABLE       0xB0520000
+#define AU1000_MAC1_ENABLE       0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif // CONFIG_SOC_AU1000
+
+/* Au1500 */
+#ifdef CONFIG_SOC_AU1500
+#define AU1500_UART0_INT          0
+#define AU1000_PCI_INTA           1 /* au1500 */
+#define AU1000_PCI_INTB           2 /* au1500 */
+#define AU1500_UART3_INT          3
+#define AU1000_PCI_INTC           4 /* au1500 */
+#define AU1000_PCI_INTD           5 /* au1500 */
+#define AU1000_DMA_INT_BASE       6
+#define AU1000_TOY_INT            14
+#define AU1000_TOY_MATCH0_INT     15
+#define AU1000_TOY_MATCH1_INT     16
+#define AU1000_TOY_MATCH2_INT     17
+#define AU1000_RTC_INT            18
+#define AU1000_RTC_MATCH0_INT     19
+#define AU1000_RTC_MATCH1_INT     20
+#define AU1000_RTC_MATCH2_INT     21
+#define AU1500_PCI_ERR_INT        22
+#define AU1000_USB_DEV_REQ_INT    24
+#define AU1000_USB_DEV_SUS_INT    25
+#define AU1000_USB_HOST_INT       26
+#define AU1000_ACSYNC_INT         27
+#define AU1500_MAC0_DMA_INT       28
+#define AU1500_MAC1_DMA_INT       29
+#define AU1000_AC97C_INT          31
+#define AU1000_GPIO_0             32
+#define AU1000_GPIO_1             33
+#define AU1000_GPIO_2             34
+#define AU1000_GPIO_3             35
+#define AU1000_GPIO_4             36
+#define AU1000_GPIO_5             37
+#define AU1000_GPIO_6             38
+#define AU1000_GPIO_7             39
+#define AU1000_GPIO_8             40
+#define AU1000_GPIO_9             41
+#define AU1000_GPIO_10            42
+#define AU1000_GPIO_11            43
+#define AU1000_GPIO_12            44
+#define AU1000_GPIO_13            45
+#define AU1000_GPIO_14            46
+#define AU1000_GPIO_15            47
+#define AU1500_GPIO_200           48
+#define AU1500_GPIO_201           49
+#define AU1500_GPIO_202           50
+#define AU1500_GPIO_203           51
+#define AU1500_GPIO_20            52
+#define AU1500_GPIO_204           53
+#define AU1500_GPIO_205           54
+#define AU1500_GPIO_23            55
+#define AU1500_GPIO_24            56
+#define AU1500_GPIO_25            57
+#define AU1500_GPIO_26            58
+#define AU1500_GPIO_27            59
+#define AU1500_GPIO_28            60
+#define AU1500_GPIO_206           61
+#define AU1500_GPIO_207           62
+#define AU1500_GPIO_208_215       63
+
+#define UART0_ADDR                0xB1100000
+#define UART3_ADDR                0xB1400000
+
+#define USB_OHCI_BASE             0x10100000 // phys addr for ioremap
+#define USB_HOST_CONFIG           0xB017fffc
+
+#define AU1500_ETH0_BASE	  0xB1500000
+#define AU1500_ETH1_BASE	  0xB1510000
+#define AU1500_MAC0_ENABLE       0xB1520000
+#define AU1500_MAC1_ENABLE       0xB1520004
+#define NUM_ETH_INTERFACES 2
+#endif // CONFIG_SOC_AU1500
+
+/* Au1100 */
+#ifdef CONFIG_SOC_AU1100
+#define AU1100_UART0_INT          0
+#define AU1100_UART1_INT          1
+#define AU1100_SD_INT             2
+#define AU1100_UART3_INT          3
+#define AU1000_SSI0_INT           4
+#define AU1000_SSI1_INT           5
+#define AU1000_DMA_INT_BASE       6
+#define AU1000_TOY_INT            14
+#define AU1000_TOY_MATCH0_INT     15
+#define AU1000_TOY_MATCH1_INT     16
+#define AU1000_TOY_MATCH2_INT     17
+#define AU1000_RTC_INT            18
+#define AU1000_RTC_MATCH0_INT     19
+#define AU1000_RTC_MATCH1_INT     20
+#define AU1000_RTC_MATCH2_INT     21
+#define AU1000_IRDA_TX_INT        22
+#define AU1000_IRDA_RX_INT        23
+#define AU1000_USB_DEV_REQ_INT    24
+#define AU1000_USB_DEV_SUS_INT    25
+#define AU1000_USB_HOST_INT       26
+#define AU1000_ACSYNC_INT         27
+#define AU1100_MAC0_DMA_INT       28
+#define	AU1100_GPIO_208_215	29
+#define	AU1100_LCD_INT            30
+#define AU1000_AC97C_INT          31
+#define AU1000_GPIO_0             32
+#define AU1000_GPIO_1             33
+#define AU1000_GPIO_2             34
+#define AU1000_GPIO_3             35
+#define AU1000_GPIO_4             36
+#define AU1000_GPIO_5             37
+#define AU1000_GPIO_6             38
+#define AU1000_GPIO_7             39
+#define AU1000_GPIO_8             40
+#define AU1000_GPIO_9             41
+#define AU1000_GPIO_10            42
+#define AU1000_GPIO_11            43
+#define AU1000_GPIO_12            44
+#define AU1000_GPIO_13            45
+#define AU1000_GPIO_14            46
+#define AU1000_GPIO_15            47
+
+#define UART0_ADDR                0xB1100000
+#define UART1_ADDR                0xB1200000
+#define UART3_ADDR                0xB1400000
+
+#define USB_OHCI_BASE             0x10100000 // phys addr for ioremap
+#define USB_HOST_CONFIG           0xB017fffc
+
+#define AU1100_ETH0_BASE	  0xB0500000
+#define AU1100_MAC0_ENABLE       0xB0520000
+#define NUM_ETH_INTERFACES 1
+#endif // CONFIG_SOC_AU1100
+
+#ifdef CONFIG_SOC_AU1550
+#define AU1550_UART0_INT          0
+#define AU1550_PCI_INTA           1
+#define AU1550_PCI_INTB           2
+#define AU1550_DDMA_INT           3
+#define AU1550_CRYPTO_INT         4
+#define AU1550_PCI_INTC           5
+#define AU1550_PCI_INTD           6
+#define AU1550_PCI_RST_INT        7
+#define AU1550_UART1_INT          8
+#define AU1550_UART3_INT          9
+#define AU1550_PSC0_INT           10
+#define AU1550_PSC1_INT           11
+#define AU1550_PSC2_INT           12
+#define AU1550_PSC3_INT           13
+#define AU1550_TOY_INT			  14
+#define AU1550_TOY_MATCH0_INT     15
+#define AU1550_TOY_MATCH1_INT     16
+#define AU1550_TOY_MATCH2_INT     17
+#define AU1550_RTC_INT            18
+#define AU1550_RTC_MATCH0_INT     19
+#define AU1550_RTC_MATCH1_INT     20
+#define AU1550_RTC_MATCH2_INT     21
+#define AU1550_NAND_INT           23
+#define AU1550_USB_DEV_REQ_INT    24
+#define AU1550_USB_DEV_SUS_INT    25
+#define AU1550_USB_HOST_INT       26
+#define AU1000_USB_DEV_REQ_INT    AU1550_USB_DEV_REQ_INT
+#define AU1000_USB_DEV_SUS_INT    AU1550_USB_DEV_SUS_INT
+#define AU1000_USB_HOST_INT       AU1550_USB_HOST_INT
+#define AU1550_MAC0_DMA_INT       27
+#define AU1550_MAC1_DMA_INT       28
+#define AU1000_GPIO_0             32
+#define AU1000_GPIO_1             33
+#define AU1000_GPIO_2             34
+#define AU1000_GPIO_3             35
+#define AU1000_GPIO_4             36
+#define AU1000_GPIO_5             37
+#define AU1000_GPIO_6             38
+#define AU1000_GPIO_7             39
+#define AU1000_GPIO_8             40
+#define AU1000_GPIO_9             41
+#define AU1000_GPIO_10            42
+#define AU1000_GPIO_11            43
+#define AU1000_GPIO_12            44
+#define AU1000_GPIO_13            45
+#define AU1000_GPIO_14            46
+#define AU1000_GPIO_15            47
+#define AU1550_GPIO_200           48
+#define AU1500_GPIO_201_205       49	// Logical or of GPIO201:205
+#define AU1500_GPIO_16            50
+#define AU1500_GPIO_17            51
+#define AU1500_GPIO_20            52
+#define AU1500_GPIO_21            53
+#define AU1500_GPIO_22            54
+#define AU1500_GPIO_23            55
+#define AU1500_GPIO_24            56
+#define AU1500_GPIO_25            57
+#define AU1500_GPIO_26            58
+#define AU1500_GPIO_27            59
+#define AU1500_GPIO_28            60
+#define AU1500_GPIO_206           61
+#define AU1500_GPIO_207           62
+#define AU1500_GPIO_208_218       63	// Logical or of GPIO208:218
+
+#define UART0_ADDR                0xB1100000
+#define UART1_ADDR                0xB1200000
+#define UART3_ADDR                0xB1400000
+
+#define USB_OHCI_BASE             0x14020000 // phys addr for ioremap
+#define USB_HOST_CONFIG           0xB4027ffc
+
+#define AU1550_ETH0_BASE      0xB0500000
+#define AU1550_ETH1_BASE      0xB0510000
+#define AU1550_MAC0_ENABLE       0xB0520000
+#define AU1550_MAC1_ENABLE       0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif // CONFIG_SOC_AU1550
+
+#ifdef CONFIG_SOC_AU1200
+#define AU1200_UART0_INT          0
+#define AU1200_SWT_INT            1
+#define AU1200_SD_INT             2
+#define AU1200_DDMA_INT           3
+#define AU1200_MAE_BE_INT         4
+#define AU1200_GPIO_200           5
+#define AU1200_GPIO_201           6
+#define AU1200_GPIO_202           7
+#define AU1200_UART1_INT          8
+#define AU1200_MAE_FE_INT         9
+#define AU1200_PSC0_INT           10
+#define AU1200_PSC1_INT           11
+#define AU1200_AES_INT            12
+#define AU1200_CAMERA_INT         13
+#define AU1200_TOY_INT			  14
+#define AU1200_TOY_MATCH0_INT     15
+#define AU1200_TOY_MATCH1_INT     16
+#define AU1200_TOY_MATCH2_INT     17
+#define AU1200_RTC_INT            18
+#define AU1200_RTC_MATCH0_INT     19
+#define AU1200_RTC_MATCH1_INT     20
+#define AU1200_RTC_MATCH2_INT     21
+#define AU1200_NAND_INT           23
+#define AU1200_GPIO_204           24
+#define AU1200_GPIO_205           25
+#define AU1200_GPIO_206           26
+#define AU1200_GPIO_207           27
+#define AU1200_GPIO_208_215       28 // Logical OR of 208:215
+#define AU1200_USB_INT            29
+#define AU1200_LCD_INT            30
+#define AU1200_MAE_BOTH_INT       31
+#define AU1000_GPIO_0             32
+#define AU1000_GPIO_1             33
+#define AU1000_GPIO_2             34
+#define AU1000_GPIO_3             35
+#define AU1000_GPIO_4             36
+#define AU1000_GPIO_5             37
+#define AU1000_GPIO_6             38
+#define AU1000_GPIO_7             39
+#define AU1000_GPIO_8             40
+#define AU1000_GPIO_9             41
+#define AU1000_GPIO_10            42
+#define AU1000_GPIO_11            43
+#define AU1000_GPIO_12            44
+#define AU1000_GPIO_13            45
+#define AU1000_GPIO_14            46
+#define AU1000_GPIO_15            47
+#define AU1000_GPIO_16            48
+#define AU1000_GPIO_17            49
+#define AU1000_GPIO_18            50
+#define AU1000_GPIO_19            51
+#define AU1000_GPIO_20            52
+#define AU1000_GPIO_21            53
+#define AU1000_GPIO_22            54
+#define AU1000_GPIO_23            55
+#define AU1000_GPIO_24            56
+#define AU1000_GPIO_25            57
+#define AU1000_GPIO_26            58
+#define AU1000_GPIO_27            59
+#define AU1000_GPIO_28            60
+#define AU1000_GPIO_29            61
+#define AU1000_GPIO_30            62
+#define AU1000_GPIO_31            63
+
+#define UART0_ADDR                0xB1100000
+#define UART1_ADDR                0xB1200000
+
+#define USB_OHCI_BASE             0x14020000 // phys addr for ioremap
+#define USB_HOST_CONFIG           0xB4027ffc
+
+// these are here for prototyping on au1550 (do not exist on au1200)
+#define AU1200_ETH0_BASE      0xB0500000
+#define AU1200_ETH1_BASE      0xB0510000
+#define AU1200_MAC0_ENABLE       0xB0520000
+#define AU1200_MAC1_ENABLE       0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif // CONFIG_SOC_AU1200
+
+#define AU1000_LAST_INTC0_INT     31
+#define AU1000_MAX_INTR           63
+
+
+/* Programmable Counters 0 and 1 */
+#define SYS_BASE                   0xB1900000
+#define SYS_COUNTER_CNTRL          (SYS_BASE + 0x14)
+  #define SYS_CNTRL_E1S            (1<<23)
+  #define SYS_CNTRL_T1S            (1<<20)
+  #define SYS_CNTRL_M21            (1<<19)
+  #define SYS_CNTRL_M11            (1<<18)
+  #define SYS_CNTRL_M01            (1<<17)
+  #define SYS_CNTRL_C1S            (1<<16)
+  #define SYS_CNTRL_BP             (1<<14)
+  #define SYS_CNTRL_EN1            (1<<13)
+  #define SYS_CNTRL_BT1            (1<<12)
+  #define SYS_CNTRL_EN0            (1<<11)
+  #define SYS_CNTRL_BT0            (1<<10)
+  #define SYS_CNTRL_E0             (1<<8)
+  #define SYS_CNTRL_E0S            (1<<7)
+  #define SYS_CNTRL_32S            (1<<5)
+  #define SYS_CNTRL_T0S            (1<<4)
+  #define SYS_CNTRL_M20            (1<<3)
+  #define SYS_CNTRL_M10            (1<<2)
+  #define SYS_CNTRL_M00            (1<<1)
+  #define SYS_CNTRL_C0S            (1<<0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM                 (SYS_BASE + 0)
+#define SYS_TOYWRITE                (SYS_BASE + 4)
+#define SYS_TOYMATCH0               (SYS_BASE + 8)
+#define SYS_TOYMATCH1               (SYS_BASE + 0xC)
+#define SYS_TOYMATCH2               (SYS_BASE + 0x10)
+#define SYS_TOYREAD                 (SYS_BASE + 0x40)
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM                 (SYS_BASE + 0x44)
+#define SYS_RTCWRITE                (SYS_BASE + 0x48)
+#define SYS_RTCMATCH0               (SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1               (SYS_BASE + 0x50)
+#define SYS_RTCMATCH2               (SYS_BASE + 0x54)
+#define SYS_RTCREAD                 (SYS_BASE + 0x58)
+
+/* I2S Controller */
+#define I2S_DATA                    0xB1000000
+  #define I2S_DATA_MASK        (0xffffff)
+#define I2S_CONFIG                0xB1000004
+  #define I2S_CONFIG_XU        (1<<25)
+  #define I2S_CONFIG_XO        (1<<24)
+  #define I2S_CONFIG_RU        (1<<23)
+  #define I2S_CONFIG_RO        (1<<22)
+  #define I2S_CONFIG_TR        (1<<21)
+  #define I2S_CONFIG_TE        (1<<20)
+  #define I2S_CONFIG_TF        (1<<19)
+  #define I2S_CONFIG_RR        (1<<18)
+  #define I2S_CONFIG_RE        (1<<17)
+  #define I2S_CONFIG_RF        (1<<16)
+  #define I2S_CONFIG_PD        (1<<11)
+  #define I2S_CONFIG_LB        (1<<10)
+  #define I2S_CONFIG_IC        (1<<9)
+  #define I2S_CONFIG_FM_BIT    7
+  #define I2S_CONFIG_FM_MASK     (0x3 << I2S_CONFIG_FM_BIT)
+    #define I2S_CONFIG_FM_I2S    (0x0 << I2S_CONFIG_FM_BIT)
+    #define I2S_CONFIG_FM_LJ     (0x1 << I2S_CONFIG_FM_BIT)
+    #define I2S_CONFIG_FM_RJ     (0x2 << I2S_CONFIG_FM_BIT)
+  #define I2S_CONFIG_TN        (1<<6)
+  #define I2S_CONFIG_RN        (1<<5)
+  #define I2S_CONFIG_SZ_BIT    0
+  #define I2S_CONFIG_SZ_MASK     (0x1F << I2S_CONFIG_SZ_BIT)
+
+#define I2S_CONTROL                0xB1000008
+  #define I2S_CONTROL_D         (1<<1)
+  #define I2S_CONTROL_CE        (1<<0)
+
+/* USB Host Controller */
+#define USB_OHCI_LEN              0x00100000
+
+/* USB Device Controller */
+#define USBD_EP0RD                0xB0200000
+#define USBD_EP0WR                0xB0200004
+#define USBD_EP2WR                0xB0200008
+#define USBD_EP3WR                0xB020000C
+#define USBD_EP4RD                0xB0200010
+#define USBD_EP5RD                0xB0200014
+#define USBD_INTEN                0xB0200018
+#define USBD_INTSTAT              0xB020001C
+  #define USBDEV_INT_SOF       (1<<12)
+  #define USBDEV_INT_HF_BIT    6
+  #define USBDEV_INT_HF_MASK   (0x3f << USBDEV_INT_HF_BIT)
+  #define USBDEV_INT_CMPLT_BIT  0
+  #define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
+#define USBD_CONFIG               0xB0200020
+#define USBD_EP0CS                0xB0200024
+#define USBD_EP2CS                0xB0200028
+#define USBD_EP3CS                0xB020002C
+#define USBD_EP4CS                0xB0200030
+#define USBD_EP5CS                0xB0200034
+  #define USBDEV_CS_SU         (1<<14)
+  #define USBDEV_CS_NAK        (1<<13)
+  #define USBDEV_CS_ACK        (1<<12)
+  #define USBDEV_CS_BUSY       (1<<11)
+  #define USBDEV_CS_TSIZE_BIT  1
+  #define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
+  #define USBDEV_CS_STALL      (1<<0)
+#define USBD_EP0RDSTAT            0xB0200040
+#define USBD_EP0WRSTAT            0xB0200044
+#define USBD_EP2WRSTAT            0xB0200048
+#define USBD_EP3WRSTAT            0xB020004C
+#define USBD_EP4RDSTAT            0xB0200050
+#define USBD_EP5RDSTAT            0xB0200054
+  #define USBDEV_FSTAT_FLUSH     (1<<6)
+  #define USBDEV_FSTAT_UF        (1<<5)
+  #define USBDEV_FSTAT_OF        (1<<4)
+  #define USBDEV_FSTAT_FCNT_BIT  0
+  #define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
+#define USBD_ENABLE               0xB0200058
+  #define USBDEV_ENABLE (1<<1)
+  #define USBDEV_CE     (1<<0)
+
+/* Ethernet Controllers  */
+
+/* 4 byte offsets from AU1000_ETH_BASE */
+#define MAC_CONTROL                     0x0
+  #define MAC_RX_ENABLE               (1<<2)
+  #define MAC_TX_ENABLE               (1<<3)
+  #define MAC_DEF_CHECK               (1<<5)
+  #define MAC_SET_BL(X)       (((X)&0x3)<<6)
+  #define MAC_AUTO_PAD                (1<<8)
+  #define MAC_DISABLE_RETRY          (1<<10)
+  #define MAC_DISABLE_BCAST          (1<<11)
+  #define MAC_LATE_COL               (1<<12)
+  #define MAC_HASH_MODE              (1<<13)
+  #define MAC_HASH_ONLY              (1<<15)
+  #define MAC_PASS_ALL               (1<<16)
+  #define MAC_INVERSE_FILTER         (1<<17)
+  #define MAC_PROMISCUOUS            (1<<18)
+  #define MAC_PASS_ALL_MULTI         (1<<19)
+  #define MAC_FULL_DUPLEX            (1<<20)
+  #define MAC_NORMAL_MODE                 0
+  #define MAC_INT_LOOPBACK           (1<<21)
+  #define MAC_EXT_LOOPBACK           (1<<22)
+  #define MAC_DISABLE_RX_OWN         (1<<23)
+  #define MAC_BIG_ENDIAN             (1<<30)
+  #define MAC_RX_ALL                 (1<<31)
+#define MAC_ADDRESS_HIGH                0x4
+#define MAC_ADDRESS_LOW                 0x8
+#define MAC_MCAST_HIGH                  0xC
+#define MAC_MCAST_LOW                  0x10
+#define MAC_MII_CNTRL                  0x14
+  #define MAC_MII_BUSY                (1<<0)
+  #define MAC_MII_READ                     0
+  #define MAC_MII_WRITE               (1<<1)
+  #define MAC_SET_MII_SELECT_REG(X)   (((X)&0x1f)<<6)
+  #define MAC_SET_MII_SELECT_PHY(X)   (((X)&0x1f)<<11)
+#define MAC_MII_DATA                   0x18
+#define MAC_FLOW_CNTRL                 0x1C
+  #define MAC_FLOW_CNTRL_BUSY         (1<<0)
+  #define MAC_FLOW_CNTRL_ENABLE       (1<<1)
+  #define MAC_PASS_CONTROL            (1<<2)
+  #define MAC_SET_PAUSE(X)        (((X)&0xffff)<<16)
+#define MAC_VLAN1_TAG                  0x20
+#define MAC_VLAN2_TAG                  0x24
+
+/* Ethernet Controller Enable */
+
+  #define MAC_EN_CLOCK_ENABLE         (1<<0)
+  #define MAC_EN_RESET0               (1<<1)
+  #define MAC_EN_TOSS                 (0<<2)
+  #define MAC_EN_CACHEABLE            (1<<3)
+  #define MAC_EN_RESET1               (1<<4)
+  #define MAC_EN_RESET2               (1<<5)
+  #define MAC_DMA_RESET               (1<<6)
+
+/* Ethernet Controller DMA Channels */
+
+#define MAC0_TX_DMA_ADDR         0xB4004000
+#define MAC1_TX_DMA_ADDR         0xB4004200
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS             0x0
+  #define TX_FRAME_ABORTED            (1<<0)
+  #define TX_JAB_TIMEOUT              (1<<1)
+  #define TX_NO_CARRIER               (1<<2)
+  #define TX_LOSS_CARRIER             (1<<3)
+  #define TX_EXC_DEF                  (1<<4)
+  #define TX_LATE_COLL_ABORT          (1<<5)
+  #define TX_EXC_COLL                 (1<<6)
+  #define TX_UNDERRUN                 (1<<7)
+  #define TX_DEFERRED                 (1<<8)
+  #define TX_LATE_COLL                (1<<9)
+  #define TX_COLL_CNT_MASK         (0xF<<10)
+  #define TX_PKT_RETRY               (1<<31)
+#define MAC_TX_BUFF0_ADDR                0x4
+  #define TX_DMA_ENABLE               (1<<0)
+  #define TX_T_DONE                   (1<<1)
+  #define TX_GET_DMA_BUFFER(X)    (((X)>>2)&0x3)
+#define MAC_TX_BUFF0_LEN                 0x8
+#define MAC_TX_BUFF1_STATUS             0x10
+#define MAC_TX_BUFF1_ADDR               0x14
+#define MAC_TX_BUFF1_LEN                0x18
+#define MAC_TX_BUFF2_STATUS             0x20
+#define MAC_TX_BUFF2_ADDR               0x24
+#define MAC_TX_BUFF2_LEN                0x28
+#define MAC_TX_BUFF3_STATUS             0x30
+#define MAC_TX_BUFF3_ADDR               0x34
+#define MAC_TX_BUFF3_LEN                0x38
+
+#define MAC0_RX_DMA_ADDR         0xB4004100
+#define MAC1_RX_DMA_ADDR         0xB4004300
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS              0x0
+  #define RX_FRAME_LEN_MASK           0x3fff
+  #define RX_WDOG_TIMER              (1<<14)
+  #define RX_RUNT                    (1<<15)
+  #define RX_OVERLEN                 (1<<16)
+  #define RX_COLL                    (1<<17)
+  #define RX_ETHER                   (1<<18)
+  #define RX_MII_ERROR               (1<<19)
+  #define RX_DRIBBLING               (1<<20)
+  #define RX_CRC_ERROR               (1<<21)
+  #define RX_VLAN1                   (1<<22)
+  #define RX_VLAN2                   (1<<23)
+  #define RX_LEN_ERROR               (1<<24)
+  #define RX_CNTRL_FRAME             (1<<25)
+  #define RX_U_CNTRL_FRAME           (1<<26)
+  #define RX_MCAST_FRAME             (1<<27)
+  #define RX_BCAST_FRAME             (1<<28)
+  #define RX_FILTER_FAIL             (1<<29)
+  #define RX_PACKET_FILTER           (1<<30)
+  #define RX_MISSED_FRAME            (1<<31)
+
+  #define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN |  \
+                    RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+                    RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR                0x4
+  #define RX_DMA_ENABLE               (1<<0)
+  #define RX_T_DONE                   (1<<1)
+  #define RX_GET_DMA_BUFFER(X)    (((X)>>2)&0x3)
+  #define RX_SET_BUFF_ADDR(X)     ((X)&0xffffffc0)
+#define MAC_RX_BUFF1_STATUS              0x10
+#define MAC_RX_BUFF1_ADDR                0x14
+#define MAC_RX_BUFF2_STATUS              0x20
+#define MAC_RX_BUFF2_ADDR                0x24
+#define MAC_RX_BUFF3_STATUS              0x30
+#define MAC_RX_BUFF3_ADDR                0x34
+
+
+/* UARTS 0-3 */
+#define UART_BASE                 UART0_ADDR
+#define UART_DEBUG_BASE           UART3_ADDR
+
+#define UART_RX		0	/* Receive buffer */
+#define UART_TX		4	/* Transmit buffer */
+#define UART_IER	8	/* Interrupt Enable Register */
+#define UART_IIR	0xC	/* Interrupt ID Register */
+#define UART_FCR	0x10	/* FIFO Control Register */
+#define UART_LCR	0x14	/* Line Control Register */
+#define UART_MCR	0x18	/* Modem Control Register */
+#define UART_LSR	0x1C	/* Line Status Register */
+#define UART_MSR	0x20	/* Modem Status Register */
+#define UART_CLK	0x28	/* Baud Rate Clock Divider */
+#define UART_MOD_CNTRL	0x100	/* Module Control */
+
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK	0xF0 /* Mask for the FIFO trigger range */
+#define UART_FCR_R_TRIGGER_1	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR_R_TRIGGER_4	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR_R_TRIGGER_8	0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR_R_TRIGGER_14   0xA0 /* Mask for receive trigger set at 14 */
+#define UART_FCR_T_TRIGGER_0	0x00 /* Mask for transmit trigger set at 0 */
+#define UART_FCR_T_TRIGGER_4	0x10 /* Mask for transmit trigger set at 4 */
+#define UART_FCR_T_TRIGGER_8    0x20 /* Mask for transmit trigger set at 8 */
+#define UART_FCR_T_TRIGGER_12	0x30 /* Mask for transmit trigger set at 12 */
+
+/*
+ * These are the definitions for the Line Control Register
+ */
+#define UART_LCR_SBC	0x40	/* Set break control */
+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
+#define UART_LCR_EPAR	0x10	/* Even parity select */
+#define UART_LCR_PARITY	0x08	/* Parity Enable */
+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT	0x40	/* Transmitter empty */
+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
+#define UART_LSR_BI	0x10	/* Break interrupt indicator */
+#define UART_LSR_FE	0x08	/* Frame error indicator */
+#define UART_LSR_PE	0x04	/* Parity error indicator */
+#define UART_LSR_OE	0x02	/* Overrun error indicator */
+#define UART_LSR_DR	0x01	/* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
+#define UART_MCR_OUT2	0x08	/* Out2 complement */
+#define UART_MCR_OUT1	0x04	/* Out1 complement */
+#define UART_MCR_RTS	0x02	/* RTS complement */
+#define UART_MCR_DTR	0x01	/* DTR complement */
+
+/*
+ * These are the definitions for the Modem Status Register
+ */
+#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
+#define UART_MSR_RI	0x40	/* Ring Indicator */
+#define UART_MSR_DSR	0x20	/* Data Set Ready */
+#define UART_MSR_CTS	0x10	/* Clear to Send */
+#define UART_MSR_DDCD	0x08	/* Delta DCD */
+#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
+#define UART_MSR_DDSR	0x02	/* Delta DSR */
+#define UART_MSR_DCTS	0x01	/* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
+
+
+
+/* SSIO */
+#define SSI0_STATUS                0xB1600000
+  #define SSI_STATUS_BF              (1<<4)
+  #define SSI_STATUS_OF              (1<<3)
+  #define SSI_STATUS_UF              (1<<2)
+  #define SSI_STATUS_D               (1<<1)
+  #define SSI_STATUS_B               (1<<0)
+#define SSI0_INT                   0xB1600004
+  #define SSI_INT_OI                 (1<<3)
+  #define SSI_INT_UI                 (1<<2)
+  #define SSI_INT_DI                 (1<<1)
+#define SSI0_INT_ENABLE            0xB1600008
+  #define SSI_INTE_OIE               (1<<3)
+  #define SSI_INTE_UIE               (1<<2)
+  #define SSI_INTE_DIE               (1<<1)
+#define SSI0_CONFIG                0xB1600020
+  #define SSI_CONFIG_AO              (1<<24)
+  #define SSI_CONFIG_DO              (1<<23)
+  #define SSI_CONFIG_ALEN_BIT        20
+    #define SSI_CONFIG_ALEN_MASK       (0x7<<20)
+  #define SSI_CONFIG_DLEN_BIT        16
+    #define SSI_CONFIG_DLEN_MASK       (0x7<<16)
+  #define SSI_CONFIG_DD              (1<<11)
+  #define SSI_CONFIG_AD              (1<<10)
+  #define SSI_CONFIG_BM_BIT          8
+    #define SSI_CONFIG_BM_MASK         (0x3<<8)
+  #define SSI_CONFIG_CE              (1<<7)
+  #define SSI_CONFIG_DP              (1<<6)
+  #define SSI_CONFIG_DL              (1<<5)
+  #define SSI_CONFIG_EP              (1<<4)
+#define SSI0_ADATA                 0xB1600024
+  #define SSI_AD_D                   (1<<24)
+  #define SSI_AD_ADDR_BIT            16
+    #define SSI_AD_ADDR_MASK           (0xff<<16)
+  #define SSI_AD_DATA_BIT            0
+    #define SSI_AD_DATA_MASK           (0xfff<<0)
+#define SSI0_CLKDIV                0xB1600028
+#define SSI0_CONTROL               0xB1600100
+  #define SSI_CONTROL_CD             (1<<1)
+  #define SSI_CONTROL_E              (1<<0)
+
+/* SSI1 */
+#define SSI1_STATUS                0xB1680000
+#define SSI1_INT                   0xB1680004
+#define SSI1_INT_ENABLE            0xB1680008
+#define SSI1_CONFIG                0xB1680020
+#define SSI1_ADATA                 0xB1680024
+#define SSI1_CLKDIV                0xB1680028
+#define SSI1_ENABLE                0xB1680100
+
+/*
+ * Register content definitions
+ */
+#define SSI_STATUS_BF				(1<<4)
+#define SSI_STATUS_OF				(1<<3)
+#define SSI_STATUS_UF				(1<<2)
+#define SSI_STATUS_D				(1<<1)
+#define SSI_STATUS_B				(1<<0)
+
+/* SSI_INT */
+#define SSI_INT_OI					(1<<3)
+#define SSI_INT_UI					(1<<2)
+#define SSI_INT_DI					(1<<1)
+
+/* SSI_INTEN */
+#define SSI_INTEN_OIE				(1<<3)
+#define SSI_INTEN_UIE				(1<<2)
+#define SSI_INTEN_DIE				(1<<1)
+
+#define SSI_CONFIG_AO				(1<<24)
+#define SSI_CONFIG_DO				(1<<23)
+#define SSI_CONFIG_ALEN				(7<<20)
+#define SSI_CONFIG_DLEN				(15<<16)
+#define SSI_CONFIG_DD				(1<<11)
+#define SSI_CONFIG_AD				(1<<10)
+#define SSI_CONFIG_BM				(3<<8)
+#define SSI_CONFIG_CE				(1<<7)
+#define SSI_CONFIG_DP				(1<<6)
+#define SSI_CONFIG_DL				(1<<5)
+#define SSI_CONFIG_EP				(1<<4)
+#define SSI_CONFIG_ALEN_N(N)		((N-1)<<20)
+#define SSI_CONFIG_DLEN_N(N)		((N-1)<<16)
+#define SSI_CONFIG_BM_HI			(0<<8)
+#define SSI_CONFIG_BM_LO			(1<<8)
+#define SSI_CONFIG_BM_CY			(2<<8)
+
+#define SSI_ADATA_D					(1<<24)
+#define SSI_ADATA_ADDR				(0xFF<<16)
+#define SSI_ADATA_DATA				(0x0FFF)
+#define SSI_ADATA_ADDR_N(N)			(N<<16)
+
+#define SSI_ENABLE_CD				(1<<1)
+#define SSI_ENABLE_E				(1<<0)
+
+
+/* IrDA Controller */
+#define IRDA_BASE                 0xB0300000
+#define IR_RING_PTR_STATUS        (IRDA_BASE+0x00)
+#define IR_RING_BASE_ADDR_H       (IRDA_BASE+0x04)
+#define IR_RING_BASE_ADDR_L       (IRDA_BASE+0x08)
+#define IR_RING_SIZE              (IRDA_BASE+0x0C)
+#define IR_RING_PROMPT            (IRDA_BASE+0x10)
+#define IR_RING_ADDR_CMPR         (IRDA_BASE+0x14)
+#define IR_INT_CLEAR              (IRDA_BASE+0x18)
+#define IR_CONFIG_1               (IRDA_BASE+0x20)
+  #define IR_RX_INVERT_LED        (1<<0)
+  #define IR_TX_INVERT_LED        (1<<1)
+  #define IR_ST                   (1<<2)
+  #define IR_SF                   (1<<3)
+  #define IR_SIR                  (1<<4)
+  #define IR_MIR                  (1<<5)
+  #define IR_FIR                  (1<<6)
+  #define IR_16CRC                (1<<7)
+  #define IR_TD                   (1<<8)
+  #define IR_RX_ALL               (1<<9)
+  #define IR_DMA_ENABLE           (1<<10)
+  #define IR_RX_ENABLE            (1<<11)
+  #define IR_TX_ENABLE            (1<<12)
+  #define IR_LOOPBACK             (1<<14)
+  #define IR_SIR_MODE	          (IR_SIR | IR_DMA_ENABLE | \
+		                   IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS              (IRDA_BASE+0x24)
+#define IR_ENABLE                 (IRDA_BASE+0x28)
+  #define IR_RX_STATUS            (1<<9)
+  #define IR_TX_STATUS            (1<<10)
+#define IR_READ_PHY_CONFIG        (IRDA_BASE+0x2C)
+#define IR_WRITE_PHY_CONFIG       (IRDA_BASE+0x30)
+#define IR_MAX_PKT_LEN            (IRDA_BASE+0x34)
+#define IR_RX_BYTE_CNT            (IRDA_BASE+0x38)
+#define IR_CONFIG_2               (IRDA_BASE+0x3C)
+  #define IR_MODE_INV             (1<<0)
+  #define IR_ONE_PIN              (1<<1)
+#define IR_INTERFACE_CONFIG       (IRDA_BASE+0x40)
+
+/* GPIO */
+#define SYS_PINFUNC               0xB190002C
+  #define SYS_PF_USB			(1<<15)	/* 2nd USB device/host */
+  #define SYS_PF_U3			(1<<14)	/* GPIO23/U3TXD */
+  #define SYS_PF_U2			(1<<13) /* GPIO22/U2TXD */
+  #define SYS_PF_U1			(1<<12) /* GPIO21/U1TXD */
+  #define SYS_PF_SRC			(1<<11)	/* GPIO6/SROMCKE */
+  #define SYS_PF_CK5			(1<<10)	/* GPIO3/CLK5 */
+  #define SYS_PF_CK4			(1<<9)	/* GPIO2/CLK4 */
+  #define SYS_PF_IRF			(1<<8)	/* GPIO15/IRFIRSEL */
+  #define SYS_PF_UR3			(1<<7)	/* GPIO[14:9]/UART3 */
+  #define SYS_PF_I2D			(1<<6)	/* GPIO8/I2SDI */
+  #define SYS_PF_I2S			(1<<5)	/* I2S/GPIO[29:31] */
+  #define SYS_PF_NI2			(1<<4)	/* NI2/GPIO[24:28] */
+  #define SYS_PF_U0			(1<<3)	/* U0TXD/GPIO20 */
+  #define SYS_PF_RD			(1<<2)	/* IRTXD/GPIO19 */
+  #define SYS_PF_A97			(1<<1)	/* AC97/SSL1 */
+  #define SYS_PF_S0			(1<<0)	/* SSI_0/GPIO[16:18] */
+
+/* Au1100 Only */
+  #define SYS_PF_PC			(1<<18)	/* PCMCIA/GPIO[207:204] */
+  #define SYS_PF_LCD			(1<<17)	/* extern lcd/GPIO[203:200] */
+  #define SYS_PF_CS			(1<<16)	/* EXTCLK0/32khz to gpio2 */
+  #define SYS_PF_EX0			(1<<9)	/* gpio2/clock */
+
+/* Au1550 Only.  Redefines lots of pins */
+  #define SYS_PF_PSC2_MASK		(7 << 17)
+  #define SYS_PF_PSC2_AC97		(0)
+  #define SYS_PF_PSC2_SPI		(0)
+  #define SYS_PF_PSC2_I2S		(1 << 17)
+  #define SYS_PF_PSC2_SMBUS		(3 << 17)
+  #define SYS_PF_PSC2_GPIO		(7 << 17)
+  #define SYS_PF_PSC3_MASK		(7 << 20)
+  #define SYS_PF_PSC3_AC97		(0)
+  #define SYS_PF_PSC3_SPI		(0)
+  #define SYS_PF_PSC3_I2S		(1 << 20)
+  #define SYS_PF_PSC3_SMBUS		(3 << 20)
+  #define SYS_PF_PSC3_GPIO		(7 << 20)
+  #define SYS_PF_PSC1_S1		(1 << 1)
+  #define SYS_PF_MUST_BE_SET		((1 << 5) | (1 << 2))
+
+#define SYS_TRIOUTRD              0xB1900100
+#define SYS_TRIOUTCLR             0xB1900100
+#define SYS_OUTPUTRD              0xB1900108
+#define SYS_OUTPUTSET             0xB1900108
+#define SYS_OUTPUTCLR             0xB190010C
+#define SYS_PINSTATERD            0xB1900110
+#define SYS_PININPUTEN            0xB1900110
+
+/* GPIO2, Au1500, Au1550 only */
+#define GPIO2_BASE                0xB1700000
+#define GPIO2_DIR                 (GPIO2_BASE + 0)
+#define GPIO2_OUTPUT              (GPIO2_BASE + 8)
+#define GPIO2_PINSTATE            (GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE           (GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE              (GPIO2_BASE + 0x14)
+
+/* Power Management */
+#define SYS_SCRATCH0              0xB1900018
+#define SYS_SCRATCH1              0xB190001C
+#define SYS_WAKEMSK               0xB1900034
+#define SYS_ENDIAN                0xB1900038
+#define SYS_POWERCTRL             0xB190003C
+#define SYS_WAKESRC               0xB190005C
+#define SYS_SLPPWR                0xB1900078
+#define SYS_SLEEP                 0xB190007C
+
+/* Clock Controller */
+#define SYS_FREQCTRL0             0xB1900020
+  #define SYS_FC_FRDIV2_BIT         22
+  #define SYS_FC_FRDIV2_MASK        (0xff << SYS_FC_FRDIV2_BIT)
+  #define SYS_FC_FE2                (1<<21)
+  #define SYS_FC_FS2                (1<<20)
+  #define SYS_FC_FRDIV1_BIT         12
+  #define SYS_FC_FRDIV1_MASK        (0xff << SYS_FC_FRDIV1_BIT)
+  #define SYS_FC_FE1                (1<<11)
+  #define SYS_FC_FS1                (1<<10)
+  #define SYS_FC_FRDIV0_BIT         2
+  #define SYS_FC_FRDIV0_MASK        (0xff << SYS_FC_FRDIV0_BIT)
+  #define SYS_FC_FE0                (1<<1)
+  #define SYS_FC_FS0                (1<<0)
+#define SYS_FREQCTRL1             0xB1900024
+  #define SYS_FC_FRDIV5_BIT         22
+  #define SYS_FC_FRDIV5_MASK        (0xff << SYS_FC_FRDIV5_BIT)
+  #define SYS_FC_FE5                (1<<21)
+  #define SYS_FC_FS5                (1<<20)
+  #define SYS_FC_FRDIV4_BIT         12
+  #define SYS_FC_FRDIV4_MASK        (0xff << SYS_FC_FRDIV4_BIT)
+  #define SYS_FC_FE4                (1<<11)
+  #define SYS_FC_FS4                (1<<10)
+  #define SYS_FC_FRDIV3_BIT         2
+  #define SYS_FC_FRDIV3_MASK        (0xff << SYS_FC_FRDIV3_BIT)
+  #define SYS_FC_FE3                (1<<1)
+  #define SYS_FC_FS3                (1<<0)
+#define SYS_CLKSRC                0xB1900028
+  #define SYS_CS_ME1_BIT            27
+  #define SYS_CS_ME1_MASK           (0x7<<SYS_CS_ME1_BIT)
+  #define SYS_CS_DE1                (1<<26)
+  #define SYS_CS_CE1                (1<<25)
+  #define SYS_CS_ME0_BIT            22
+  #define SYS_CS_ME0_MASK           (0x7<<SYS_CS_ME0_BIT)
+  #define SYS_CS_DE0                (1<<21)
+  #define SYS_CS_CE0                (1<<20)
+  #define SYS_CS_MI2_BIT            17
+  #define SYS_CS_MI2_MASK           (0x7<<SYS_CS_MI2_BIT)
+  #define SYS_CS_DI2                (1<<16)
+  #define SYS_CS_CI2                (1<<15)
+  #define SYS_CS_MUH_BIT            12
+  #define SYS_CS_MUH_MASK           (0x7<<SYS_CS_MUH_BIT)
+  #define SYS_CS_DUH                (1<<11)
+  #define SYS_CS_CUH                (1<<10)
+  #define SYS_CS_MUD_BIT            7
+  #define SYS_CS_MUD_MASK           (0x7<<SYS_CS_MUD_BIT)
+  #define SYS_CS_DUD                (1<<6)
+  #define SYS_CS_CUD                (1<<5)
+  #define SYS_CS_MIR_BIT            2
+  #define SYS_CS_MIR_MASK           (0x7<<SYS_CS_MIR_BIT)
+  #define SYS_CS_DIR                (1<<1)
+  #define SYS_CS_CIR                (1<<0)
+
+  #define SYS_CS_MUX_AUX            0x1
+  #define SYS_CS_MUX_FQ0            0x2
+  #define SYS_CS_MUX_FQ1            0x3
+  #define SYS_CS_MUX_FQ2            0x4
+  #define SYS_CS_MUX_FQ3            0x5
+  #define SYS_CS_MUX_FQ4            0x6
+  #define SYS_CS_MUX_FQ5            0x7
+#define SYS_CPUPLL                0xB1900060
+#define SYS_AUXPLL                0xB1900064
+
+/* AC97 Controller */
+#define AC97C_CONFIG              0xB0000000
+  #define AC97C_RECV_SLOTS_BIT  13
+  #define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
+  #define AC97C_XMIT_SLOTS_BIT  3
+  #define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
+  #define AC97C_SG              (1<<2)
+  #define AC97C_SYNC            (1<<1)
+  #define AC97C_RESET           (1<<0)
+#define AC97C_STATUS              0xB0000004
+  #define AC97C_XU              (1<<11)
+  #define AC97C_XO              (1<<10)
+  #define AC97C_RU              (1<<9)
+  #define AC97C_RO              (1<<8)
+  #define AC97C_READY           (1<<7)
+  #define AC97C_CP              (1<<6)
+  #define AC97C_TR              (1<<5)
+  #define AC97C_TE              (1<<4)
+  #define AC97C_TF              (1<<3)
+  #define AC97C_RR              (1<<2)
+  #define AC97C_RE              (1<<1)
+  #define AC97C_RF              (1<<0)
+#define AC97C_DATA                0xB0000008
+#define AC97C_CMD                 0xB000000C
+  #define AC97C_WD_BIT          16
+  #define AC97C_READ            (1<<7)
+  #define AC97C_INDEX_MASK      0x7f
+#define AC97C_CNTRL               0xB0000010
+  #define AC97C_RS              (1<<1)
+  #define AC97C_CE              (1<<0)
+
+
+/* Secure Digital (SD) Controller */
+#define SD0_XMIT_FIFO	0xB0600000
+#define SD0_RECV_FIFO	0xB0600004
+#define SD1_XMIT_FIFO	0xB0680000
+#define SD1_RECV_FIFO	0xB0680004
+
+
+#if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
+/* Au1500 PCI Controller */
+#define Au1500_CFG_BASE           0xB4005000 // virtual, kseg0 addr
+#define Au1500_PCI_CMEM           (Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG            (Au1500_CFG_BASE + 4)
+  #define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27))
+#define Au1500_PCI_B2BMASK_CCH    (Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID       (Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID        (Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV     (Au1500_CFG_BASE + 0x14)
+#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
+#define Au1500_PCI_ERR_ADDR       (Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK    (Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID             (Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD        (Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV       (Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE        (Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR           (Au1500_CFG_BASE + 0x110)
+
+#define Au1500_PCI_HDR            0xB4005100 // virtual, kseg0 addr
+
+/* All of our structures, like pci resource, have 32 bit members.
+ * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
+ * hard to store 0x4 0000 0000 in a 32 bit type.  We require a small patch
+ * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM
+ * addresses.  For PCI IO, it's simpler because we get to do the ioremap
+ * ourselves and then adjust the device's resources.
+ */
+#define Au1500_EXT_CFG            0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1      0x680000000ULL
+#define Au1500_PCI_IO_START       0x500000000ULL
+#define Au1500_PCI_IO_END         0x5000FFFFFULL
+#define Au1500_PCI_MEM_START      0x440000000ULL
+#define Au1500_PCI_MEM_END        0x44FFFFFFFULL
+
+#define PCI_IO_START    (Au1500_PCI_IO_START + 0x1000)
+#define PCI_IO_END      (Au1500_PCI_IO_END)
+#define PCI_MEM_START   (Au1500_PCI_MEM_START)
+#define PCI_MEM_END     (Au1500_PCI_MEM_END)
+#define PCI_FIRST_DEVFN (0<<3)
+#define PCI_LAST_DEVFN  (19<<3)
+
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END   0xffffffff
+#define IOMEM_RESOURCE_START  0x10000000
+#define IOMEM_RESOURCE_END    0xffffffff
+
+  /*
+   * Borrowed from the PPC arch:
+   * The following macro is used to lookup irqs in a standard table
+   * format for those PPC systems that do not already have PCI
+   * interrupts properly routed.
+   */
+  /* FIXME - double check this from asm-ppc/pci-bridge.h */
+#define PCI_IRQ_TABLE_LOOKUP                            \
+  ({ long _ctl_ = -1;                                 \
+      if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot)    \
+	       _ctl_ = pci_irq_table[idsel - min_idsel][pin-1];               \
+		      _ctl_; })
+
+
+#else /* Au1000 and Au1100 */
+
+/* don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000;
+#define IOPORT_RESOURCE_END   0xffffffff
+#define IOMEM_RESOURCE_START  0x10000000
+#define IOMEM_RESOURCE_END    0xffffffff
+
+#ifdef CONFIG_MIPS_PB1000
+#define PCI_IO_START      0x10000000
+#define PCI_IO_END        0x1000ffff
+#define PCI_MEM_START     0x18000000
+#define PCI_MEM_END       0x18ffffff
+#define PCI_FIRST_DEVFN   0
+#define PCI_LAST_DEVFN    1
+#else
+/* no PCI bus controller */
+#define PCI_IO_START    0
+#define PCI_IO_END      0
+#define PCI_MEM_START   0
+#define PCI_MEM_END     0 
+#define PCI_FIRST_DEVFN 0
+#define PCI_LAST_DEVFN  0
+#endif
+
+#endif
+
+/* Processor information base on prid.
+ * Copied from PowerPC.
+ */
+struct cpu_spec {
+	/* CPU is matched via (PRID & prid_mask) == prid_value */
+	unsigned int	prid_mask;
+	unsigned int	prid_value;
+
+	char		*cpu_name;
+	unsigned char	cpu_od;		/* Set Config[OD] */
+	unsigned char	cpu_bclk;	/* Enable BCLK switching */
+};
+
+extern struct cpu_spec		cpu_specs[];
+extern struct cpu_spec		*cur_cpu_spec[];
+#endif
diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h
new file mode 100644
index 000000000000..810f2fa33444
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1000_dma.h
@@ -0,0 +1,446 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using and allocating dma channels on the Alchemy
+ *      Au1000 mips processor.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+#define NUM_AU1000_DMA_CHANNELS	8
+
+/* DMA Channel Base Addresses */
+#define DMA_CHANNEL_BASE	0xB4002000
+#define DMA_CHANNEL_LEN		0x00000100
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET		0x00000000
+#define DMA_MODE_READ		DMA_MODE_SET
+#define DMA_MODE_CLEAR		0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK		(0x0f << 20)
+#define DMA_DID_BIT		16
+#define DMA_DID_MASK		(0x0f << DMA_DID_BIT)
+#define DMA_DS			(1<<15)
+#define DMA_BE			(1<<13)
+#define DMA_DR			(1<<12)
+#define DMA_TS8			(1<<11)
+#define DMA_DW_BIT		9
+#define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
+#define DMA_DW8			(0 << DMA_DW_BIT)
+#define DMA_DW16		(1 << DMA_DW_BIT)
+#define DMA_DW32		(2 << DMA_DW_BIT)
+#define DMA_NC			(1<<8)
+#define DMA_IE			(1<<7)
+#define DMA_HALT		(1<<6)
+#define DMA_GO			(1<<5)
+#define DMA_AB			(1<<4)
+#define DMA_D1			(1<<3)
+#define DMA_BE1			(1<<2)
+#define DMA_D0			(1<<1)
+#define DMA_BE0			(1<<0)
+
+#define DMA_PERIPHERAL_ADDR       0x00000008
+#define DMA_BUFFER0_START         0x0000000C
+#define DMA_BUFFER1_START         0x00000014
+#define DMA_BUFFER0_COUNT         0x00000010
+#define DMA_BUFFER1_COUNT         0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+
+/* DMA Device ID's follow */
+enum {
+	DMA_ID_UART0_TX = 0,
+	DMA_ID_UART0_RX,
+	DMA_ID_GP04,
+	DMA_ID_GP05,
+	DMA_ID_AC97C_TX,
+	DMA_ID_AC97C_RX,
+	DMA_ID_UART3_TX,
+	DMA_ID_UART3_RX,
+	DMA_ID_USBDEV_EP0_RX,
+	DMA_ID_USBDEV_EP0_TX,
+	DMA_ID_USBDEV_EP2_TX,
+	DMA_ID_USBDEV_EP3_TX,
+	DMA_ID_USBDEV_EP4_RX,
+	DMA_ID_USBDEV_EP5_RX,
+	DMA_ID_I2S_TX,
+	DMA_ID_I2S_RX,
+	DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+	DMA_ID_SD0_TX = 0,
+	DMA_ID_SD0_RX,
+	DMA_ID_SD1_TX,
+	DMA_ID_SD1_RX,
+	DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+	int dev_id;		// this channel is allocated if >=0, free otherwise
+	unsigned int io;
+	const char *dev_str;
+	int irq;
+	void *irq_dev;
+	unsigned int fifo_addr;
+	unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+			      const char *dev_str,
+			      irqreturn_t (*irqhandler)(int, void *,
+						 struct pt_regs *),
+			      unsigned long irqflags,
+			      void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+				int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+
+static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+	if (dmanr >= NUM_AU1000_DMA_CHANNELS
+	    || au1000_dma_table[dmanr].dev_id < 0)
+		return NULL;
+	return &au1000_dma_table[dmanr];
+}
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static __inline__ void enable_dma_buffer0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+static __inline__ void enable_dma_buffer1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static __inline__ void enable_dma_buffers(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static __inline__ void start_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+
+	au_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static __inline__ void halt_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	int i;
+	if (!chan)
+		return;
+
+	au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+	// poll the halt bit
+	for (i = 0; i < DMA_HALT_POLL; i++)
+		if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+			break;
+	if (i == DMA_HALT_POLL)
+		printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+
+	halt_dma(dmanr);
+
+	// now we can disable the buffers
+	au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static __inline__ int dma_halted(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return 1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* initialize a DMA channel */
+static __inline__ void init_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	u32 mode;
+	if (!chan)
+		return;
+
+	disable_dma(dmanr);
+
+	// set device FIFO address
+	au_writel(CPHYSADDR(chan->fifo_addr),
+		  chan->io + DMA_PERIPHERAL_ADDR);
+
+	mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+	if (chan->irq)
+		mode |= DMA_IE;
+
+	au_writel(~mode, chan->io + DMA_MODE_CLEAR);
+	au_writel(mode, chan->io + DMA_MODE_SET);
+}
+
+/*
+ * set mode for a specific DMA channel
+ */
+static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	/*
+	 * set_dma_mode is only allowed to change endianess, direction,
+	 * transfer size, device FIFO width, and coherency settings.
+	 * Make sure anything else is masked off.
+	 */
+	mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode |= mode;
+}
+
+static __inline__ unsigned int get_dma_mode(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return 0;
+	return chan->mode;
+}
+
+static __inline__ int get_dma_active_buffer(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return -1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+
+/*
+ * set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static __inline__ void set_dma_fifo_addr(unsigned int dmanr,
+					 unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+
+	if (chan->mode & DMA_DS)	/* second bank of device ids */
+		return;
+
+	if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+		return;
+
+	au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static __inline__ void clear_dma_done0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+static __inline__ void clear_dma_done1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static __inline__ void set_dma_count0(unsigned int dmanr,
+				      unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static __inline__ void set_dma_count1(unsigned int dmanr,
+				      unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr,
+				     unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return 0;
+
+    return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static __inline__ int get_dma_done_irq(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return -1;
+
+	return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	int curBufCntReg, count;
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	if (!chan)
+		return 0;
+
+	curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+	    DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+	count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+	if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+		count <<= 1;
+	else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+		count <<= 2;
+
+	return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
+
diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h
new file mode 100644
index 000000000000..298f92012e8e
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1000_gpio.h
@@ -0,0 +1,56 @@
+/*
+ * FILE NAME au1000_gpio.h
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	API to Alchemy Au1000 GPIO device.
+ *
+ *  Author: MontaVista Software, Inc.  <source@mvista.com>
+ *          Steve Longerbeam <stevel@mvista.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AU1000_GPIO_H
+#define __AU1000_GPIO_H
+
+#include <linux/ioctl.h>
+
+#define AU1000GPIO_IOC_MAGIC 'A'
+
+#define AU1000GPIO_IN		_IOR (AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET		_IOW (AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR	_IOW (AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT		_IOW (AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE	_IOW (AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK	_IOR (AU1000GPIO_IOC_MAGIC, 5, int)
+
+#ifdef __KERNEL__
+extern u32 get_au1000_avail_gpio_mask(void);
+extern int au1000gpio_tristate(u32 data);
+extern int au1000gpio_in(u32 *data);
+extern int au1000gpio_set(u32 data);
+extern int au1000gpio_clear(u32 data);
+extern int au1000gpio_out(u32 data);
+#endif
+
+#endif
diff --git a/include/asm-mips/mach-au1x00/au1000_usbdev.h b/include/asm-mips/mach-au1x00/au1000_usbdev.h
new file mode 100644
index 000000000000..05bc74bed0b1
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1000_usbdev.h
@@ -0,0 +1,73 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1000 USB Device-Side Driver
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *		stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define USBDEV_REV 0x0110 // BCD
+#define USBDEV_EP0_MAX_PACKET_SIZE 64
+
+typedef enum {
+	ATTACHED = 0,
+	POWERED,
+	DEFAULT,
+	ADDRESS,
+	CONFIGURED
+} usbdev_state_t;
+
+typedef enum {
+	CB_NEW_STATE = 0,
+	CB_PKT_COMPLETE
+} usbdev_cb_type_t;
+
+
+typedef struct usbdev_pkt {
+	int                ep_addr;    // ep addr this packet routed to
+	int                size;       // size of payload in bytes
+	unsigned           status;     // packet status
+	struct usbdev_pkt* next;       // function layer can't touch this
+	u8                 payload[0]; // the payload
+} usbdev_pkt_t;
+
+#define PKT_STATUS_ACK  (1<<0)
+#define PKT_STATUS_NAK  (1<<1)
+#define PKT_STATUS_SU   (1<<2)
+
+extern int usbdev_init(struct usb_device_descriptor* dev_desc,
+		       struct usb_config_descriptor* config_desc,
+		       struct usb_interface_descriptor* if_desc,
+		       struct usb_endpoint_descriptor* ep_desc,
+		       struct usb_string_descriptor* str_desc[],
+		       void (*cb)(usbdev_cb_type_t, unsigned long, void *),
+		       void* cb_data);
+
+extern void usbdev_exit(void);
+
+extern int usbdev_alloc_packet  (int ep_addr, int data_size,
+				 usbdev_pkt_t** pkt);
+extern int usbdev_send_packet   (int ep_addr, usbdev_pkt_t* pkt);
+extern int usbdev_receive_packet(int ep_addr, usbdev_pkt_t** pkt);
+extern int usbdev_get_byte_count(int ep_addr);
diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h
new file mode 100644
index 000000000000..9e7d1ba21b55
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,205 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using the MMC/SD controllers on the
+ *      Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ *         	dan@embeddededge.com or tim@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ *    June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+
+#define NUM_AU1100_MMC_CONTROLLERS	2
+
+
+#define AU1100_SD_IRQ	2
+
+
+#define SD0_BASE	0xB0600000
+#define SD1_BASE	0xB0680000
+
+
+/*
+ *  Register offsets.
+ */
+#define SD_TXPORT	(0x0000)
+#define SD_RXPORT	(0x0004)
+#define SD_CONFIG	(0x0008)
+#define SD_ENABLE	(0x000C)
+#define SD_CONFIG2	(0x0010)
+#define SD_BLKSIZE	(0x0014)
+#define SD_STATUS	(0x0018)
+#define SD_DEBUG	(0x001C)
+#define SD_CMD		(0x0020)
+#define SD_CMDARG	(0x0024)
+#define SD_RESP3	(0x0028)
+#define SD_RESP2	(0x002C)
+#define SD_RESP1	(0x0030)
+#define SD_RESP0	(0x0034)
+#define SD_TIMEOUT	(0x0038)
+
+
+/*
+ *  SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD	(0x000000ff)
+
+
+/*
+ *  SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD	(0x000000ff)
+
+
+/*
+ *  SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV	(0x000001ff)
+#define SD_CONFIG_DE	(0x00000200)
+#define SD_CONFIG_NE	(0x00000400)
+#define SD_CONFIG_TU	(0x00000800)
+#define SD_CONFIG_TO	(0x00001000)
+#define SD_CONFIG_RU	(0x00002000)
+#define SD_CONFIG_RO	(0x00004000)
+#define SD_CONFIG_I	(0x00008000)
+#define SD_CONFIG_CR	(0x00010000)
+#define SD_CONFIG_RAT	(0x00020000)
+#define SD_CONFIG_DD	(0x00040000)
+#define SD_CONFIG_DT	(0x00080000)
+#define SD_CONFIG_SC	(0x00100000)
+#define SD_CONFIG_RC	(0x00200000)
+#define SD_CONFIG_WC	(0x00400000)
+#define SD_CONFIG_xxx	(0x00800000)
+#define SD_CONFIG_TH	(0x01000000)
+#define SD_CONFIG_TE	(0x02000000)
+#define SD_CONFIG_TA	(0x04000000)
+#define SD_CONFIG_RH	(0x08000000)
+#define SD_CONFIG_RA	(0x10000000)
+#define SD_CONFIG_RF	(0x20000000)
+#define SD_CONFIG_CD	(0x40000000)
+#define SD_CONFIG_SI	(0x80000000)
+
+
+/*
+ *  SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE	(0x00000001)
+#define SD_ENABLE_R	(0x00000002)
+
+
+/*
+ *  SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN	(0x00000001)
+#define SD_CONFIG2_FF	(0x00000002)
+#define SD_CONFIG2_xx1	(0x00000004)
+#define SD_CONFIG2_DF	(0x00000008)
+#define SD_CONFIG2_DC	(0x00000010)
+#define SD_CONFIG2_xx2	(0x000000e0)
+#define SD_CONFIG2_WB	(0x00000100)
+#define SD_CONFIG2_RW	(0x00000200)
+
+
+/*
+ *  SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS	(0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT	 (0)
+#define SD_BLKSIZE_BC	(0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT	(16)
+
+
+/*
+ *  SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW	(0x00000007)
+#define SD_STATUS_xx1	(0x00000008)
+#define SD_STATUS_CB	(0x00000010)
+#define SD_STATUS_DB	(0x00000020)
+#define SD_STATUS_CF	(0x00000040)
+#define SD_STATUS_D3	(0x00000080)
+#define SD_STATUS_xx2	(0x00000300)
+#define SD_STATUS_NE	(0x00000400)
+#define SD_STATUS_TU	(0x00000800)
+#define SD_STATUS_TO	(0x00001000)
+#define SD_STATUS_RU	(0x00002000)
+#define SD_STATUS_RO	(0x00004000)
+#define SD_STATUS_I	(0x00008000)
+#define SD_STATUS_CR	(0x00010000)
+#define SD_STATUS_RAT	(0x00020000)
+#define SD_STATUS_DD	(0x00040000)
+#define SD_STATUS_DT	(0x00080000)
+#define SD_STATUS_SC	(0x00100000)
+#define SD_STATUS_RC	(0x00200000)
+#define SD_STATUS_WC	(0x00400000)
+#define SD_STATUS_xx3	(0x00800000)
+#define SD_STATUS_TH	(0x01000000)
+#define SD_STATUS_TE	(0x02000000)
+#define SD_STATUS_TA	(0x04000000)
+#define SD_STATUS_RH	(0x08000000)
+#define SD_STATUS_RA	(0x10000000)
+#define SD_STATUS_RF	(0x20000000)
+#define SD_STATUS_CD	(0x40000000)
+#define SD_STATUS_SI	(0x80000000)
+
+
+/*
+ *  SD_CMD bit definitions.
+ */
+#define SD_CMD_GO	(0x00000001)
+#define SD_CMD_RY	(0x00000002)
+#define SD_CMD_xx1	(0x0000000c)
+#define SD_CMD_CT_MASK	(0x000000f0)
+#define SD_CMD_CT_0	(0x00000000)
+#define SD_CMD_CT_1	(0x00000010)
+#define SD_CMD_CT_2	(0x00000020)
+#define SD_CMD_CT_3	(0x00000030)
+#define SD_CMD_CT_4	(0x00000040)
+#define SD_CMD_CT_5	(0x00000050)
+#define SD_CMD_CT_6	(0x00000060)
+#define SD_CMD_CT_7	(0x00000070)
+#define SD_CMD_CI	(0x0000ff00)
+#define SD_CMD_CI_SHIFT		(8)
+#define SD_CMD_RT_MASK	(0x00ff0000)
+#define SD_CMD_RT_0	(0x00000000)
+#define SD_CMD_RT_1	(0x00010000)
+#define SD_CMD_RT_2	(0x00020000)
+#define SD_CMD_RT_3	(0x00030000)
+#define SD_CMD_RT_4	(0x00040000)
+#define SD_CMD_RT_5	(0x00050000)
+#define SD_CMD_RT_6	(0x00060000)
+#define SD_CMD_RT_1B	(0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 000000000000..d5eb88cd7d51
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,299 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1550 Descriptor
+ *	Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#include <linux/config.h>
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* The DMA base addresses.
+ * The Channels are every 256 bytes (0x0100) from the channel 0 base.
+ * Interrupt status/enable is bits 15:0 for channels 15 to zero.
+ */
+#define DDMA_GLOBAL_BASE	0xb4003000
+#define DDMA_CHANNEL_BASE	0xb4002000
+
+typedef struct dbdma_global {
+	u32	ddma_config;
+	u32	ddma_intstat;
+	u32	ddma_throttle;
+	u32	ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration.
+*/
+#define DDMA_CONFIG_AF		(1 << 2)
+#define DDMA_CONFIG_AH		(1 << 1)
+#define DDMA_CONFIG_AL		(1 << 0)
+
+#define DDMA_THROTTLE_EN	(1 << 31)
+
+/* The structure of a DMA Channel.
+*/
+typedef struct au1xxx_dma_channel {
+	u32	ddma_cfg;	/* See below */
+	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
+	u32	ddma_statptr;	/* word aligned pointer to status word */
+	u32	ddma_dbell;	/* A write activates channel operation */
+	u32	ddma_irq;	/* If bit 0 set, interrupt pending */
+	u32	ddma_stat;	/* See below */
+	u32	ddma_bytecnt;	/* Byte count, valid only when chan idle */
+	/* Remainder, up to the 256 byte boundary, is reserved.
+	*/
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED	(1 << 9)	/* source DMA level/edge detect */
+#define DDMA_CFG_SP	(1 << 8)	/* source DMA polarity */
+#define DDMA_CFG_DED	(1 << 7)	/* destination DMA level/edge detect */
+#define DDMA_CFG_DP	(1 << 6)	/* destination DMA polarity */
+#define DDMA_CFG_SYNC	(1 << 5)	/* Sync static bus controller */
+#define DDMA_CFG_PPR	(1 << 4)	/* PCI posted read/write control */
+#define DDMA_CFG_DFN	(1 << 3)	/* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE	(1 << 2)	/* Source big endian */
+#define DDMA_CFG_DBE	(1 << 1)	/* Destination big endian */
+#define DDMA_CFG_EN	(1 << 0)	/* Channel enable */
+
+/* Always set when descriptor processing done, regardless of
+ * interrupt enable state.  Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN	(1 << 0)
+
+#define DDMA_STAT_DB	(1 << 2)	/* Doorbell pushed */
+#define DDMA_STAT_V	(1 << 1)	/* Descriptor valid */
+#define DDMA_STAT_H	(1 << 0)	/* Channel Halted */
+
+/* "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef struct au1xxx_ddma_desc {
+	u32	dscr_cmd0;		/* See below */
+	u32	dscr_cmd1;		/* See below */
+	u32	dscr_source0;		/* source phys address */
+	u32	dscr_source1;		/* See below */
+	u32	dscr_dest0;		/* Destination address */
+	u32	dscr_dest1;		/* See below */
+	u32	dscr_stat;		/* completion status */
+	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
+#define DSCR_CMD0_MEM		(1 << 30)	/* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK	(0x1f << 25)	/* Source ID */
+#define DSCR_CMD0_DID_MASK	(0x1f << 20)	/* Destination ID */
+#define DSCR_CMD0_SW_MASK	(0x3 << 18)	/* Source Width */
+#define DSCR_CMD0_DW_MASK	(0x3 << 16)	/* Destination Width */
+#define DSCR_CMD0_ARB		(0x1 << 15)	/* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK	(0x3 << 13)	/* Descriptor Type */
+#define DSCR_CMD0_SN		(0x1 << 12)	/* Source non-coherent */
+#define DSCR_CMD0_DN		(0x1 << 11)	/* Destination non-coherent */
+#define DSCR_CMD0_SM		(0x1 << 10)	/* Stride mode */
+#define DSCR_CMD0_IE		(0x1 << 8)	/* Interrupt Enable */
+#define DSCR_CMD0_SP		(0x1 << 4)	/* Status pointer select */
+#define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
+
+/* Command 0 device IDs.
+*/
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART3_TX	2
+#define DSCR_CMD0_UART3_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_DMA_REQ2	6
+#define DSCR_CMD0_DMA_REQ3	7
+#define DSCR_CMD0_USBDEV_RX0	8
+#define DSCR_CMD0_USBDEV_TX0	9
+#define DSCR_CMD0_USBDEV_TX1	10
+#define DSCR_CMD0_USBDEV_TX2	11
+#define DSCR_CMD0_USBDEV_RX3	12
+#define DSCR_CMD0_USBDEV_RX4	13
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_PSC2_TX	18
+#define DSCR_CMD0_PSC2_RX	19
+#define DSCR_CMD0_PSC3_TX	20
+#define DSCR_CMD0_PSC3_RX	21
+#define DSCR_CMD0_PCI_WRITE	22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_MAC0_RX	24
+#define DSCR_CMD0_MAC0_TX	25
+#define DSCR_CMD0_MAC1_RX	26
+#define DSCR_CMD0_MAC1_TX	27
+#define DSCR_CMD0_THROTTLE	30
+#define DSCR_CMD0_ALWAYS	31
+#define DSCR_NDEV_IDS		32
+
+#define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width.
+*/
+#define DSCR_CMD0_BYTE		0
+#define DSCR_CMD0_HALFWORD	1
+#define DSCR_CMD0_WORD		2
+
+#define DSCR_CMD0_SW(x)		(((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x)		(((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type.
+*/
+#define DSCR_CMD0_STANDARD	0
+#define DSCR_CMD0_LITERAL	1
+#define DSCR_CMD0_CMP_BRANCH	2
+
+#define DSCR_CMD0_DT(x)		(((x) & 0x3) << 13)
+
+/* Status Instruction.
+*/
+#define DSCR_CMD0_ST_NOCHANGE	0	/* Don't change */
+#define DSCR_CMD0_ST_CURRENT	1	/* Write current status */
+#define DSCR_CMD0_ST_CMD0	2	/* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT	3	/* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x)		(((x) & 0x3) << 0)
+
+/* Descriptor Command 1
+*/
+#define DSCR_CMD1_SUPTR_MASK	(0xf << 28)	/* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK	(0xf << 24)	/* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK	(0x3 << 22)	/* Flag bits */
+#define DSCR_CMD1_BC_MASK	(0x3fffff)	/* Byte count */
+
+/* Flag description.
+*/
+#define DSCR_CMD1_FL_MEM_STRIDE0	0
+#define DSCR_CMD1_FL_MEM_STRIDE1	1
+#define DSCR_CMD1_FL_MEM_STRIDE2	2
+
+#define DSCR_CMD1_FL(x)		(((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride.
+*/
+#define DSCR_SRC1_STS_MASK	(3 << 30)	/* Src xfer size */
+#define DSCR_SRC1_SAM_MASK	(3 << 28)	/* Src xfer movement */
+#define DSCR_SRC1_SB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_SRC1_SB(x)		(((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_SRC1_SS(x)		(((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride.
+*/
+#define DSCR_DEST1_DTS_MASK	(3 << 30)	/* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK	(3 << 28)	/* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_DEST1_DB(x)	(((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_DEST1_DS(x)	(((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1		0
+#define DSCR_xTS_SIZE2		1
+#define DSCR_xTS_SIZE4		2
+#define DSCR_xTS_SIZE8		3
+#define DSCR_SRC1_STS(x)	(((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x)	(((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT	0
+#define DSCR_xAM_DECREMENT	1
+#define DSCR_xAM_STATIC		2
+#define DSCR_xAM_BURST		3
+#define DSCR_SRC1_SAM(x)	(((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x)	(((x) & 3) << 28)
+
+/* The next descriptor pointer.
+*/
+#define DSCR_NXTPTR_MASK	(0x07ffffff)
+#define DSCR_NXTPTR(x)		((x) >> 5)
+#define DSCR_GET_NXTPTR(x)	((x) << 5)
+#define DSCR_NXTPTR_MS		(1 << 27)
+
+/* The number of DBDMA channels.
+*/
+#define NUM_DBDMA_CHANS	16
+
+/* External functions for drivers to use.
+*/
+/* Use this to allocate a dbdma channel.  The device ids are one of the
+ * DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name.  The 'callback' is called during dma completion
+ * interrupt.
+ */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+       void (*callback)(int, void *, struct pt_regs *), void *callparam);
+
+#define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
+
+/* ACK!  These should be in a board specific description file.
+*/
+#ifdef CONFIG_MIPS_PB1550
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#endif
+
+
+/* Set the device width of a in/out fifo.
+*/
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for dbdma.
+*/
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors.
+*/
+u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
+u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
+
+/* Get a buffer from the destination descriptor.
+*/
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 000000000000..283519dfdec4
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,522 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/* The PSC base addresses.  */
+#ifdef CONFIG_SOC_AU1550
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
+#define PSC2_BASE_ADDR		0xb0a00000
+#define PSC3_BASE_ADDR		0xb0d00000
+#endif
+
+/* The PSC select and control registers are common to
+ * all protocols.
+ */
+#define PSC_SEL_OFFSET		0x00000000
+#define PSC_CTRL_OFFSET		0x00000004
+
+#define PSC_SEL_CLK_MASK	(3 << 4)
+#define PSC_SEL_CLK_INTCLK	(0 << 4)
+#define PSC_SEL_CLK_EXTCLK	(1 << 4)
+#define PSC_SEL_CLK_SERCLK	(2 << 4)
+
+#define PSC_SEL_PS_MASK		0x00000007
+#define PSC_SEL_PS_DISABLED	(0)
+#define PSC_SEL_PS_SPIMODE	(2)
+#define PSC_SEL_PS_I2SMODE	(3)
+#define PSC_SEL_PS_AC97MODE	(4)
+#define PSC_SEL_PS_SMBUSMODE	(5)
+
+#define PSC_CTRL_DISABLE	(0)
+#define PSC_CTRL_SUSPEND	(2)
+#define PSC_CTRL_ENABLE		(3)
+
+/* AC97 Registers.
+*/
+#define PSC_AC97CFG_OFFSET	0x00000008
+#define PSC_AC97MSK_OFFSET	0x0000000c
+#define PSC_AC97PCR_OFFSET	0x00000010
+#define PSC_AC97STAT_OFFSET	0x00000014
+#define PSC_AC97EVNT_OFFSET	0x00000018
+#define PSC_AC97TXRX_OFFSET	0x0000001c
+#define PSC_AC97CDC_OFFSET	0x00000020
+#define PSC_AC97RST_OFFSET	0x00000024
+#define PSC_AC97GPO_OFFSET	0x00000028
+#define PSC_AC97GPI_OFFSET	0x0000002c
+
+#define AC97_PSC_SEL		(AC97_PSC_BASE + PSC_SEL_OFFSET)
+#define AC97_PSC_CTRL		(AC97_PSC_BASE + PSC_CTRL_OFFSET)
+#define PSC_AC97CFG		(AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
+#define PSC_AC97MSK		(AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
+#define PSC_AC97PCR		(AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
+#define PSC_AC97STAT		(AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
+#define PSC_AC97EVNT		(AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
+#define PSC_AC97TXRX		(AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
+#define PSC_AC97CDC		(AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
+#define PSC_AC97RST		(AC97_PSC_BASE + PSC_AC97RST_OFFSET)
+#define PSC_AC97GPO		(AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
+#define PSC_AC97GPI		(AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
+
+/* AC97 Config Register.
+*/
+#define PSC_AC97CFG_RT_MASK	(3 << 30)
+#define PSC_AC97CFG_RT_FIFO1	(0 << 30)
+#define PSC_AC97CFG_RT_FIFO2	(1 << 30)
+#define PSC_AC97CFG_RT_FIFO4	(2 << 30)
+#define PSC_AC97CFG_RT_FIFO8	(3 << 30)
+
+#define PSC_AC97CFG_TT_MASK	(3 << 28)
+#define PSC_AC97CFG_TT_FIFO1	(0 << 28)
+#define PSC_AC97CFG_TT_FIFO2	(1 << 28)
+#define PSC_AC97CFG_TT_FIFO4	(2 << 28)
+#define PSC_AC97CFG_TT_FIFO8	(3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE	(1 << 27)
+#define PSC_AC97CFG_DE_ENABLE	(1 << 26)
+#define PSC_AC97CFG_SE_ENABLE	(1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK	(0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK	(0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK	(0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE	(1)
+
+/* Enable slots 3-12.
+*/
+#define PSC_AC97CFG_TXSLOT_ENA(x)	(1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x)	(1 << (((x) - 3) + 1))
+
+/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11.  Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x)	(((((x)-2)/2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x)	(((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register.
+*/
+#define PSC_AC97MSK_GR		(1 << 25)
+#define PSC_AC97MSK_CD		(1 << 24)
+#define PSC_AC97MSK_RR		(1 << 13)
+#define PSC_AC97MSK_RO		(1 << 12)
+#define PSC_AC97MSK_RU		(1 << 11)
+#define PSC_AC97MSK_TR		(1 << 10)
+#define PSC_AC97MSK_TO		(1 << 9)
+#define PSC_AC97MSK_TU		(1 << 8)
+#define PSC_AC97MSK_RD		(1 << 5)
+#define PSC_AC97MSK_TD		(1 << 4)
+#define PSC_AC97MSK_ALLMASK	(PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+				 PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+				 PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+				 PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+				 PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register.
+*/
+#define PSC_AC97PCR_RC		(1 << 6)
+#define PSC_AC97PCR_RP		(1 << 5)
+#define PSC_AC97PCR_RS		(1 << 4)
+#define PSC_AC97PCR_TC		(1 << 2)
+#define PSC_AC97PCR_TP		(1 << 1)
+#define PSC_AC97PCR_TS		(1 << 0)
+
+/* AC97 Status register (read only).
+*/
+#define PSC_AC97STAT_CB		(1 << 26)
+#define PSC_AC97STAT_CP		(1 << 25)
+#define PSC_AC97STAT_CR		(1 << 24)
+#define PSC_AC97STAT_RF		(1 << 13)
+#define PSC_AC97STAT_RE		(1 << 12)
+#define PSC_AC97STAT_RR		(1 << 11)
+#define PSC_AC97STAT_TF		(1 << 10)
+#define PSC_AC97STAT_TE		(1 << 9)
+#define PSC_AC97STAT_TR		(1 << 8)
+#define PSC_AC97STAT_RB		(1 << 5)
+#define PSC_AC97STAT_TB		(1 << 4)
+#define PSC_AC97STAT_DI		(1 << 2)
+#define PSC_AC97STAT_DR		(1 << 1)
+#define PSC_AC97STAT_SR		(1 << 0)
+
+/* AC97 Event Register.
+*/
+#define PSC_AC97EVNT_GR		(1 << 25)
+#define PSC_AC97EVNT_CD		(1 << 24)
+#define PSC_AC97EVNT_RR		(1 << 13)
+#define PSC_AC97EVNT_RO		(1 << 12)
+#define PSC_AC97EVNT_RU		(1 << 11)
+#define PSC_AC97EVNT_TR		(1 << 10)
+#define PSC_AC97EVNT_TO		(1 << 9)
+#define PSC_AC97EVNT_TU		(1 << 8)
+#define PSC_AC97EVNT_RD		(1 << 5)
+#define PSC_AC97EVNT_TD		(1 << 4)
+
+/* CODEC Command Register.
+*/
+#define PSC_AC97CDC_RD		(1 << 25)
+#define PSC_AC97CDC_ID_MASK	(3 << 23)
+#define PSC_AC97CDC_INDX_MASK	(0x7f << 16)
+#define PSC_AC97CDC_ID(x)	(((x) & 0x3) << 23)
+#define PSC_AC97CDC_INDX(x)	(((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register.
+*/
+#define PSC_AC97RST_RST		(1 << 1)
+#define PSC_AC97RST_SNC		(1 << 0)
+
+
+/* PSC in I2S Mode.
+*/
+typedef struct	psc_i2s {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_i2scfg;
+	u32	psc_i2smsk;
+	u32	psc_i2spcr;
+	u32	psc_i2sstat;
+	u32	psc_i2sevent;
+	u32	psc_i2stxrx;
+	u32	psc_i2sudf;
+} psc_i2s_t;
+
+/* I2S Config Register.
+*/
+#define PSC_I2SCFG_RT_MASK	(3 << 30)
+#define PSC_I2SCFG_RT_FIFO1	(0 << 30)
+#define PSC_I2SCFG_RT_FIFO2	(1 << 30)
+#define PSC_I2SCFG_RT_FIFO4	(2 << 30)
+#define PSC_I2SCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_I2SCFG_TT_MASK	(3 << 28)
+#define PSC_I2SCFG_TT_FIFO1	(0 << 28)
+#define PSC_I2SCFG_TT_FIFO2	(1 << 28)
+#define PSC_I2SCFG_TT_FIFO4	(2 << 28)
+#define PSC_I2SCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE	(1 << 27)
+#define PSC_I2SCFG_DE_ENABLE	(1 << 26)
+#define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WI		(1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK	(3 << 13)
+#define PSC_I2SCFG_DIV2		(0 << 13)
+#define PSC_I2SCFG_DIV4		(1 << 13)
+#define PSC_I2SCFG_DIV8		(2 << 13)
+#define PSC_I2SCFG_DIV16	(3 << 13)
+
+#define PSC_I2SCFG_BI		(1 << 12)
+#define PSC_I2SCFG_BUF		(1 << 11)
+#define PSC_I2SCFG_MLJ		(1 << 10)
+#define PSC_I2SCFG_XM		(1 << 9)
+
+/* The word length equation is simply LEN+1.
+ */
+#define PSC_I2SCFG_SET_LEN(x)	((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x)	((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB		(1 << 2)
+#define PSC_I2SCFG_MLF		(1 << 1)
+#define PSC_I2SCFG_MS		(1 << 0)
+
+/* I2S Mask Register.
+*/
+#define PSC_I2SMSK_RR		(1 << 13)
+#define PSC_I2SMSK_RO		(1 << 12)
+#define PSC_I2SMSK_RU		(1 << 11)
+#define PSC_I2SMSK_TR		(1 << 10)
+#define PSC_I2SMSK_TO		(1 << 9)
+#define PSC_I2SMSK_TU		(1 << 8)
+#define PSC_I2SMSK_RD		(1 << 5)
+#define PSC_I2SMSK_TD		(1 << 4)
+#define PSC_I2SMSK_ALLMASK	(PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+				 PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+				 PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+				 PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register.
+*/
+#define PSC_I2SPCR_RC		(1 << 6)
+#define PSC_I2SPCR_RP		(1 << 5)
+#define PSC_I2SPCR_RS		(1 << 4)
+#define PSC_I2SPCR_TC		(1 << 2)
+#define PSC_I2SPCR_TP		(1 << 1)
+#define PSC_I2SPCR_TS		(1 << 0)
+
+/* I2S Status register (read only).
+*/
+#define PSC_I2SSTAT_RF		(1 << 13)
+#define PSC_I2SSTAT_RE		(1 << 12)
+#define PSC_I2SSTAT_RR		(1 << 11)
+#define PSC_I2SSTAT_TF		(1 << 10)
+#define PSC_I2SSTAT_TE		(1 << 9)
+#define PSC_I2SSTAT_TR		(1 << 8)
+#define PSC_I2SSTAT_RB		(1 << 5)
+#define PSC_I2SSTAT_TB		(1 << 4)
+#define PSC_I2SSTAT_DI		(1 << 2)
+#define PSC_I2SSTAT_DR		(1 << 1)
+#define PSC_I2SSTAT_SR		(1 << 0)
+
+/* I2S Event Register.
+*/
+#define PSC_I2SEVNT_RR		(1 << 13)
+#define PSC_I2SEVNT_RO		(1 << 12)
+#define PSC_I2SEVNT_RU		(1 << 11)
+#define PSC_I2SEVNT_TR		(1 << 10)
+#define PSC_I2SEVNT_TO		(1 << 9)
+#define PSC_I2SEVNT_TU		(1 << 8)
+#define PSC_I2SEVNT_RD		(1 << 5)
+#define PSC_I2SEVNT_TD		(1 << 4)
+
+/* PSC in SPI Mode.
+*/
+typedef struct	psc_spi {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_spicfg;
+	u32	psc_spimsk;
+	u32	psc_spipcr;
+	u32	psc_spistat;
+	u32	psc_spievent;
+	u32	psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register.
+*/
+#define PSC_SPICFG_RT_MASK	(3 << 30)
+#define PSC_SPICFG_RT_FIFO1	(0 << 30)
+#define PSC_SPICFG_RT_FIFO2	(1 << 30)
+#define PSC_SPICFG_RT_FIFO4	(2 << 30)
+#define PSC_SPICFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SPICFG_TT_MASK	(3 << 28)
+#define PSC_SPICFG_TT_FIFO1	(0 << 28)
+#define PSC_SPICFG_TT_FIFO2	(1 << 28)
+#define PSC_SPICFG_TT_FIFO4	(2 << 28)
+#define PSC_SPICFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE	(1 << 27)
+#define PSC_SPICFG_DE_ENABLE	(1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x)	((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x)	(((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2		0
+#define PSC_SPICFG_DIV4		1
+#define PSC_SPICFG_DIV8		2
+#define PSC_SPICFG_DIV16	3
+
+#define PSC_SPICFG_BI		(1 << 12)
+#define PSC_SPICFG_PSE		(1 << 11)
+#define PSC_SPICFG_CGE		(1 << 10)
+#define PSC_SPICFG_CDE		(1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x)	((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x)	(((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB		(1 << 3)
+#define PSC_SPICFG_MLF		(1 << 1)
+#define PSC_SPICFG_MO		(1 << 0)
+
+/* SPI Mask Register.
+*/
+#define PSC_SPIMSK_MM		(1 << 16)
+#define PSC_SPIMSK_RR		(1 << 13)
+#define PSC_SPIMSK_RO		(1 << 12)
+#define PSC_SPIMSK_RU		(1 << 11)
+#define PSC_SPIMSK_TR		(1 << 10)
+#define PSC_SPIMSK_TO		(1 << 9)
+#define PSC_SPIMSK_TU		(1 << 8)
+#define PSC_SPIMSK_SD		(1 << 5)
+#define PSC_SPIMSK_MD		(1 << 4)
+#define PSC_SPIMSK_ALLMASK	(PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+				 PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+				 PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+				 PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register.
+*/
+#define PSC_SPIPCR_RC		(1 << 6)
+#define PSC_SPIPCR_SP		(1 << 5)
+#define PSC_SPIPCR_SS		(1 << 4)
+#define PSC_SPIPCR_TC		(1 << 2)
+#define PSC_SPIPCR_MS		(1 << 0)
+
+/* SPI Status register (read only).
+*/
+#define PSC_SPISTAT_RF		(1 << 13)
+#define PSC_SPISTAT_RE		(1 << 12)
+#define PSC_SPISTAT_RR		(1 << 11)
+#define PSC_SPISTAT_TF		(1 << 10)
+#define PSC_SPISTAT_TE		(1 << 9)
+#define PSC_SPISTAT_TR		(1 << 8)
+#define PSC_SPISTAT_SB		(1 << 5)
+#define PSC_SPISTAT_MB		(1 << 4)
+#define PSC_SPISTAT_DI		(1 << 2)
+#define PSC_SPISTAT_DR		(1 << 1)
+#define PSC_SPISTAT_SR		(1 << 0)
+
+/* SPI Event Register.
+*/
+#define PSC_SPIEVNT_MM		(1 << 16)
+#define PSC_SPIEVNT_RR		(1 << 13)
+#define PSC_SPIEVNT_RO		(1 << 12)
+#define PSC_SPIEVNT_RU		(1 << 11)
+#define PSC_SPIEVNT_TR		(1 << 10)
+#define PSC_SPIEVNT_TO		(1 << 9)
+#define PSC_SPIEVNT_TU		(1 << 8)
+#define PSC_SPIEVNT_SD		(1 << 5)
+#define PSC_SPIEVNT_MD		(1 << 4)
+
+/* Transmit register control.
+*/
+#define PSC_SPITXRX_LC		(1 << 29)
+#define PSC_SPITXRX_SR		(1 << 28)
+
+/* PSC in SMBus (I2C) Mode.
+*/
+typedef struct	psc_smb {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_smbcfg;
+	u32	psc_smbmsk;
+	u32	psc_smbpcr;
+	u32	psc_smbstat;
+	u32	psc_smbevnt;
+	u32	psc_smbtxrx;
+	u32	psc_smbtmr;
+} psc_smb_t;
+
+/* SMBus Config Register.
+*/
+#define PSC_SMBCFG_RT_MASK	(3 << 30)
+#define PSC_SMBCFG_RT_FIFO1	(0 << 30)
+#define PSC_SMBCFG_RT_FIFO2	(1 << 30)
+#define PSC_SMBCFG_RT_FIFO4	(2 << 30)
+#define PSC_SMBCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SMBCFG_TT_MASK	(3 << 28)
+#define PSC_SMBCFG_TT_FIFO1	(0 << 28)
+#define PSC_SMBCFG_TT_FIFO2	(1 << 28)
+#define PSC_SMBCFG_TT_FIFO4	(2 << 28)
+#define PSC_SMBCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE	(1 << 27)
+#define PSC_SMBCFG_DE_ENABLE	(1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2		0
+#define PSC_SMBCFG_DIV4		1
+#define PSC_SMBCFG_DIV8		2
+#define PSC_SMBCFG_DIV16	3
+
+#define PSC_SMBCFG_GCE		(1 << 9)
+#define PSC_SMBCFG_SFM		(1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x)	(((x) & 0x7f) << 1)
+
+/* SMBus Mask Register.
+*/
+#define PSC_SMBMSK_DN		(1 << 30)
+#define PSC_SMBMSK_AN		(1 << 29)
+#define PSC_SMBMSK_AL		(1 << 28)
+#define PSC_SMBMSK_RR		(1 << 13)
+#define PSC_SMBMSK_RO		(1 << 12)
+#define PSC_SMBMSK_RU		(1 << 11)
+#define PSC_SMBMSK_TR		(1 << 10)
+#define PSC_SMBMSK_TO		(1 << 9)
+#define PSC_SMBMSK_TU		(1 << 8)
+#define PSC_SMBMSK_SD		(1 << 5)
+#define PSC_SMBMSK_MD		(1 << 4)
+#define PSC_SMBMSK_ALLMASK	(PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+				 PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+				 PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+				 PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+				 PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register.
+*/
+#define PSC_SMBPCR_DC		(1 << 2)
+#define PSC_SMBPCR_MS		(1 << 0)
+
+/* SMBus Status register (read only).
+*/
+#define PSC_SMBSTAT_BB		(1 << 28)
+#define PSC_SMBSTAT_RF		(1 << 13)
+#define PSC_SMBSTAT_RE		(1 << 12)
+#define PSC_SMBSTAT_RR		(1 << 11)
+#define PSC_SMBSTAT_TF		(1 << 10)
+#define PSC_SMBSTAT_TE		(1 << 9)
+#define PSC_SMBSTAT_TR		(1 << 8)
+#define PSC_SMBSTAT_SB		(1 << 5)
+#define PSC_SMBSTAT_MB		(1 << 4)
+#define PSC_SMBSTAT_DI		(1 << 2)
+#define PSC_SMBSTAT_DR		(1 << 1)
+#define PSC_SMBSTAT_SR		(1 << 0)
+
+/* SMBus Event Register.
+*/
+#define PSC_SMBEVNT_DN		(1 << 30)
+#define PSC_SMBEVNT_AN		(1 << 29)
+#define PSC_SMBEVNT_AL		(1 << 28)
+#define PSC_SMBEVNT_RR		(1 << 13)
+#define PSC_SMBEVNT_RO		(1 << 12)
+#define PSC_SMBEVNT_RU		(1 << 11)
+#define PSC_SMBEVNT_TR		(1 << 10)
+#define PSC_SMBEVNT_TO		(1 << 9)
+#define PSC_SMBEVNT_TU		(1 << 8)
+#define PSC_SMBEVNT_SD		(1 << 5)
+#define PSC_SMBEVNT_MD		(1 << 4)
+#define PSC_SMBEVNT_ALLCLR	(PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+				 PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+				 PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+				 PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+				 PSC_SMBEVNT_MD)
+
+/* Transmit register control.
+*/
+#define PSC_SMBTXRX_RSR		(1 << 30)
+#define PSC_SMBTXRX_STP		(1 << 29)
+#define PSC_SMBTXRX_DATAMASK	(0xff)
+
+/* SMBus protocol timers register.
+*/
+#define PSC_SMBTMR_SET_TH(x)	(((x) & 0x3) << 30)
+#define PSC_SMBTMR_SET_PS(x)	(((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x)	(((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x)	(((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x)	(((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x)	(((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x)	(((x) & 0x1f) << 0)
+
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/include/asm-mips/mach-au1x00/timex.h b/include/asm-mips/mach-au1x00/timex.h
new file mode 100644
index 000000000000..e3ada66cb636
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/timex.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_AU1X00_TIMEX_H
+#define __ASM_MACH_AU1X00_TIMEX_H
+
+#define CLOCK_TICK_RATE		((HZ * 100000UL) / 2)
+
+#endif /* __ASM_MACH_AU1X00_TIMEX_H */
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
new file mode 100644
index 000000000000..4691398a414f
--- /dev/null
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -0,0 +1,205 @@
+/*
+ * AMD Alchemy DB1x00 Reference Boards
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * 
+ */
+#ifndef __ASM_DB1X00_H
+#define __ASM_DB1X00_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MIPS_DB1550
+#define BCSR_KSEG1_ADDR 0xAF000000
+#define NAND_PHYS_ADDR  0x20000000
+#else
+#define BCSR_KSEG1_ADDR 0xAE000000
+#endif
+
+/*
+ * Overlay data structure of the Db1x00 board registers.
+ * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
+ */
+typedef volatile struct
+{
+	/*00*/	unsigned short whoami;
+	unsigned short reserved0;
+	/*04*/	unsigned short status;
+	unsigned short reserved1;
+	/*08*/	unsigned short switches;
+	unsigned short reserved2;
+	/*0C*/	unsigned short resets;
+	unsigned short reserved3;
+	/*10*/	unsigned short pcmcia;
+	unsigned short reserved4;
+	/*14*/	unsigned short specific;
+	unsigned short reserved5;
+	/*18*/	unsigned short leds;
+	unsigned short reserved6;
+	/*1C*/	unsigned short swreset;
+	unsigned short reserved7;
+
+} BCSR;
+
+
+/*
+ * Register/mask bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID		0x000F
+#define BCSR_WHOAMI_CPLD		0x00F0
+#define BCSR_WHOAMI_BOARD		0x0F00
+
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SWAPBOOT		0x2000
+#define BCSR_STATUS_FLASHDEN		0xC000
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0_PWR		0x0040
+#define BCSR_BOARD_SD1_PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SD0_WP		0x4000
+#define BCSR_BOARD_SD1_WP		0x8000
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+#define BCSR_SWRESET_RESET		0x0080
+
+/* PCMCIA Db1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+/* SD controller macros */
+/*
+ * Detect card.
+ */
+#define mmc_card_inserted(_n_, _res_) \
+	do { \
+		BCSR * const bcsr = (BCSR *)0xAE000000; \
+		unsigned long mmc_wp, board_specific; \
+		if ((_n_)) { \
+			mmc_wp = BCSR_BOARD_SD1_WP; \
+		} else { \
+			mmc_wp = BCSR_BOARD_SD0_WP; \
+		} \
+		board_specific = au_readl((unsigned long)(&bcsr->specific)); \
+		if (!(board_specific & mmc_wp)) {/* low means card present */ \
+			*(int *)(_res_) = 1; \
+		} else { \
+			*(int *)(_res_) = 0; \
+		} \
+	} while (0)
+
+/*
+ * Apply power to card slot(s).
+ */
+#define mmc_power_on(_n_) \
+	do { \
+		BCSR * const bcsr = (BCSR *)0xAE000000; \
+		unsigned long mmc_pwr, mmc_wp, board_specific; \
+		if ((_n_)) { \
+			mmc_pwr = BCSR_BOARD_SD1_PWR; \
+			mmc_wp = BCSR_BOARD_SD1_WP; \
+		} else { \
+			mmc_pwr = BCSR_BOARD_SD0_PWR; \
+			mmc_wp = BCSR_BOARD_SD0_WP; \
+		} \
+		board_specific = au_readl((unsigned long)(&bcsr->specific)); \
+		if (!(board_specific & mmc_wp)) {/* low means card present */ \
+			board_specific |= mmc_pwr; \
+			au_writel(board_specific, (int)(&bcsr->specific)); \
+			au_sync(); \
+		} \
+	} while (0)
+
+
+/* NAND defines */
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H			(18 >> 2)
+#define NAND_T_PUL			(30 >> 2)
+#define NAND_T_SU			(30 >> 2)
+#define NAND_T_WH			(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
+			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
+			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
+			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+
+#endif /* __ASM_DB1X00_H */
+
diff --git a/include/asm-mips/mach-ddb5074/mc146818rtc.h b/include/asm-mips/mach-ddb5074/mc146818rtc.h
new file mode 100644
index 000000000000..2eb9acb10a5a
--- /dev/null
+++ b/include/asm-mips/mach-ddb5074/mc146818rtc.h
@@ -0,0 +1,31 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_DDB5074_MC146818RTC_H
+#define __ASM_MACH_DDB5074_MC146818RTC_H
+
+#include <asm/ddb5xxx/ddb5074.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	return *(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	*(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr) = data;
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#endif /* __ASM_MACH_DDB5074_MC146818RTC_H */
diff --git a/include/asm-mips/mach-dec/mc146818rtc.h b/include/asm-mips/mach-dec/mc146818rtc.h
new file mode 100644
index 000000000000..a326f451253b
--- /dev/null
+++ b/include/asm-mips/mach-dec/mc146818rtc.h
@@ -0,0 +1,46 @@
+/*
+ * RTC definitions for DECstation style attached Dallas DS1287 chip.
+ *
+ * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998 by Harald Koerfgen
+ * Copyright (C) 2002  Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_RTC_DEC_H
+#define __ASM_MIPS_DEC_RTC_DEC_H
+
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+extern volatile u8 *dec_rtc_base;
+extern unsigned long dec_kn_slot_size;
+
+#define RTC_PORT(x)	CPHYSADDR(dec_rtc_base)
+#define RTC_IO_EXTENT	dec_kn_slot_size
+#define RTC_IOMAPPED	0
+#undef RTC_IRQ
+
+#define RTC_DEC_YEAR	0x3f	/* Where we store the real year on DECs.  */
+
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	return dec_rtc_base[addr * 4];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	dec_rtc_base[addr * 4] = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MIPS_DEC_RTC_DEC_H */
diff --git a/include/asm-mips/mach-dec/param.h b/include/asm-mips/mach-dec/param.h
new file mode 100644
index 000000000000..3e4f0e390847
--- /dev/null
+++ b/include/asm-mips/mach-dec/param.h
@@ -0,0 +1,18 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_DEC_PARAM_H
+#define __ASM_MACH_DEC_PARAM_H
+
+/*
+ * log2(HZ), change this here if you want another HZ value. This is also
+ * used in dec_time_init.  Minimum is 1, Maximum is 15.
+ */
+#define LOG_2_HZ 7
+#define HZ (1 << LOG_2_HZ)
+
+#endif /* __ASM_MACH_DEC_PARAM_H */
diff --git a/include/asm-mips/mach-ev64120/mach-gt64120.h b/include/asm-mips/mach-ev64120/mach-gt64120.h
new file mode 100644
index 000000000000..13b1443a7a65
--- /dev/null
+++ b/include/asm-mips/mach-ev64120/mach-gt64120.h
@@ -0,0 +1,61 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H
+#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H
+
+/*
+ *   GT64120 config space base address
+ */
+extern unsigned long gt64120_base;
+
+#define GT64120_BASE	(gt64120_base)
+
+/*
+ *   PCI Bus allocation
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+/*
+ *   Duart I/O ports.
+ */
+#define EV64120_COM1_BASE_ADDR	(0x1d000000 + 0x20)
+#define EV64120_COM2_BASE_ADDR	(0x1d000000 + 0x00)
+
+
+/*
+ *   EV64120 interrupt controller register base.
+ */
+#define EV64120_ICTRL_REGS_BASE	(KSEG1ADDR(0x1f000000))
+
+/*
+ *   EV64120 UART register base.
+ */
+#define EV64120_UART0_REGS_BASE	(KSEG1ADDR(EV64120_COM1_BASE_ADDR))
+#define EV64120_UART1_REGS_BASE	(KSEG1ADDR(EV64120_COM2_BASE_ADDR))
+#define EV64120_BASE_BAUD ( 3686400 / 16 )
+
+/*
+ * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
+ * boards, they all either come in on IntD or they all come in on IntA, they
+ * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
+ * "requested" interrupt numbers and go through the list whenever we get an
+ * IntA/D.
+ *
+ * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
+ * INTD is 11.
+ */
+#define GT_TIMER	4
+#define GT_INTA		2
+#define GT_INTD		5
+
+#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */
diff --git a/include/asm-mips/mach-ev96100/mach-gt64120.h b/include/asm-mips/mach-ev96100/mach-gt64120.h
new file mode 100644
index 000000000000..0ef1e6c25acf
--- /dev/null
+++ b/include/asm-mips/mach-ev96100/mach-gt64120.h
@@ -0,0 +1,46 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_GT64120_EV96100_GT64120_DEP_H
+#define _ASM_GT64120_EV96100_GT64120_DEP_H
+
+/*
+ *   GT96100 config space base address
+ */
+#define GT64120_BASE	(KSEG1ADDR(0x14000000))
+
+/*
+ *   PCI Bus allocation
+ *
+ *   (Guessing ...)
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+/*
+ *   Duart I/O ports.
+ */
+#define EV96100_COM1_BASE_ADDR	(0xBD000000 + 0x20)
+#define EV96100_COM2_BASE_ADDR	(0xBD000000 + 0x00)
+
+
+/*
+ *   EV96100 interrupt controller register base.
+ */
+#define EV96100_ICTRL_REGS_BASE	(KSEG1ADDR(0x1f000000))
+
+/*
+ *   EV96100 UART register base.
+ */
+#define EV96100_UART0_REGS_BASE	EV96100_COM1_BASE_ADDR
+#define EV96100_UART1_REGS_BASE	EV96100_COM2_BASE_ADDR
+#define EV96100_BASE_BAUD	( 3686400 / 16 )
+
+#endif /* _ASM_GT64120_EV96100_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-generic/cpu-feature-overrides.h b/include/asm-mips/mach-generic/cpu-feature-overrides.h
new file mode 100644
index 000000000000..0aecfd08e39a
--- /dev/null
+++ b/include/asm-mips/mach-generic/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+
+/* Intensionally empty file ...  */
+
+#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-generic/floppy.h b/include/asm-mips/mach-generic/floppy.h
new file mode 100644
index 000000000000..682a5858f8d7
--- /dev/null
+++ b/include/asm-mips/mach-generic/floppy.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_FLOPPY_H
+#define __ASM_MACH_GENERIC_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cachectl.h>
+#include <asm/dma.h>
+#include <asm/floppy.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+
+/*
+ * How to access the FDC's registers.
+ */
+static inline unsigned char fd_inb(unsigned int port)
+{
+	return inb_p(port);
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	outb_p(value, port);
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	enable_dma(FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	disable_dma(FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return request_dma(FLOPPY_DMA, "floppy");
+}
+
+static inline void fd_free_dma(void)
+{
+	free_dma(FLOPPY_DMA);
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+	clear_dma_ff(FLOPPY_DMA);
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	set_dma_mode(FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *addr)
+{
+	set_dma_addr(FLOPPY_DMA, (unsigned long) addr);
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	set_dma_count(FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return get_dma_residue(FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+	enable_irq(FLOPPY_IRQ);
+}
+
+static inline void fd_disable_irq(void)
+{
+	disable_irq(FLOPPY_IRQ);
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   SA_INTERRUPT | SA_SAMPLE_RANDOM, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return 0x3f0;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_FLOPPY_H */
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
new file mode 100644
index 000000000000..cb2edd018ad6
--- /dev/null
+++ b/include/asm-mips/mach-generic/ide.h
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994-1996  Linus Torvalds & authors
+ *
+ * Copied from i386; many of the especially older MIPS or ISA-based platforms
+ * are basically identical.  Using this file probably implies i8259 PIC
+ * support in a system but the very least interrupt numbers 0 - 15 need to
+ * be put aside for legacy devices.
+ */
+#ifndef __ASM_MACH_GENERIC_IDE_H
+#define __ASM_MACH_GENERIC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/stddef.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_BLK_DEV_IDEPCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	6
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static __inline__ int ide_probe_legacy(void)
+{
+#ifdef CONFIG_PCI
+	struct pci_dev *dev;
+	if ((dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL)) != NULL ||
+	    (dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL)) != NULL) {
+		pci_dev_put(dev);
+
+		return 1;
+	}
+	return 0;
+#elif defined(CONFIG_EISA) || defined(CONFIG_ISA)
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+static __inline__ int ide_default_irq(unsigned long base)
+{
+	if (ide_probe_legacy())
+		switch (base) {
+		case 0x1f0:
+			return 14;
+		case 0x170:
+			return 15;
+		case 0x1e8:
+			return 11;
+		case 0x168:
+			return 10;
+		case 0x1e0:
+			return 8;
+		case 0x160:
+			return 12;
+		default:
+			return 0;
+		}
+	else
+		return 0;
+}
+
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+	if (ide_probe_legacy())
+		switch (index) {
+		case 0:
+			return 0x1f0;
+		case 1:
+			return 0x170;
+		case 2:
+			return 0x1e8;
+		case 3:
+			return 0x168;
+		case 4:
+			return 0x1e0;
+		case 5:
+			return 0x160;
+		default:
+			return 0;
+		}
+	else
+		return 0;
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_BLK_DEV_IDEPCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+/* MIPS port and memory-mapped I/O string operations.  */
+
+#define __ide_insw	insw
+#define __ide_insl	insl
+#define __ide_outsw	outsw
+#define __ide_outsl	outsl
+
+#define __ide_mm_insw	readsw
+#define __ide_mm_insl	readsl
+#define __ide_mm_outsw	writesw
+#define __ide_mm_outsl	writesl
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_MACH_GENERIC_IDE_H */
diff --git a/include/asm-mips/mach-generic/irq.h b/include/asm-mips/mach-generic/irq.h
new file mode 100644
index 000000000000..500e10ff24de
--- /dev/null
+++ b/include/asm-mips/mach-generic/irq.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_IRQ_H
+#define __ASM_MACH_GENERIC_IRQ_H
+
+#define NR_IRQS	128
+
+#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/include/asm-mips/mach-generic/mangle-port.h b/include/asm-mips/mach-generic/mangle-port.h
new file mode 100644
index 000000000000..4a98d83b8ec7
--- /dev/null
+++ b/include/asm-mips/mach-generic/mangle-port.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H
+#define __ASM_MACH_GENERIC_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */
diff --git a/include/asm-mips/mach-generic/mc146818rtc.h b/include/asm-mips/mach-generic/mc146818rtc.h
new file mode 100644
index 000000000000..90c2e6f77faa
--- /dev/null
+++ b/include/asm-mips/mach-generic/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_GENERIC_MC146818RTC_H
+#define __ASM_MACH_GENERIC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */
diff --git a/include/asm-mips/mach-generic/param.h b/include/asm-mips/mach-generic/param.h
new file mode 100644
index 000000000000..a0d12f964e4f
--- /dev/null
+++ b/include/asm-mips/mach-generic/param.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_PARAM_H
+#define __ASM_MACH_GENERIC_PARAM_H
+
+#define HZ		1000		/* Internal kernel timer frequency */
+
+#endif /* __ASM_MACH_GENERIC_PARAM_H */
diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h
new file mode 100644
index 000000000000..63c0a81c7832
--- /dev/null
+++ b/include/asm-mips/mach-generic/spaces.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_GENERIC_SPACES_H
+#define _ASM_MACH_GENERIC_SPACES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MIPS32
+
+#define CAC_BASE		0x80000000
+#define IO_BASE			0xa0000000
+#define UNCAC_BASE		0xa0000000
+#define MAP_BASE		0xc0000000
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x80000000UL
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		0x20000000UL
+#endif
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+
+/*
+ * This handles the memory map.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+#define PAGE_OFFSET	0x9800000000000000UL
+#else
+#define PAGE_OFFSET	0xa800000000000000UL
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ * Fixme: 59 bits is a fictive number and makes assumptions about processors
+ * in the distant future.  Nobody will care for a few years :-)
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		(1UL << 59UL)
+#endif
+
+#ifdef CONFIG_DMA_NONCOHERENT
+#define CAC_BASE		0x9800000000000000
+#else
+#define CAC_BASE		0xa800000000000000
+#endif
+#define IO_BASE			0x9000000000000000
+#define UNCAC_BASE		0x9000000000000000
+#define MAP_BASE		0xc000000000000000
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+#endif /* CONFIG_MIPS64 */
+
+#endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/include/asm-mips/mach-generic/timex.h b/include/asm-mips/mach-generic/timex.h
new file mode 100644
index 000000000000..c6a2e5f0574a
--- /dev/null
+++ b/include/asm-mips/mach-generic/timex.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_TIMEX_H
+#define __ASM_MACH_GENERIC_TIMEX_H
+
+#include <linux/config.h>
+
+/*
+ * Last remaining user of the i8254 PIC, will be converted, too ...
+ */
+#ifdef CONFIG_SNI_RM200_PCI
+#define CLOCK_TICK_RATE		1193182
+#else
+#define CLOCK_TICK_RATE		500000
+#endif
+
+#endif /* __ASM_MACH_GENERIC_TIMEX_H */
diff --git a/include/asm-mips/mach-generic/topology.h b/include/asm-mips/mach-generic/topology.h
new file mode 100644
index 000000000000..5428f333a02c
--- /dev/null
+++ b/include/asm-mips/mach-generic/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
new file mode 100644
index 000000000000..3c8896d9b133
--- /dev/null
+++ b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP22 with a variety of processors so we can't use defaults for everything.
+ */
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0		/* Needs to change for R8000 */
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ip22/ds1286.h b/include/asm-mips/mach-ip22/ds1286.h
new file mode 100644
index 000000000000..f19f1eafbc71
--- /dev/null
+++ b/include/asm-mips/mach-ip22/ds1286.h
@@ -0,0 +1,18 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP22_DS1286_H
+#define __ASM_MACH_IP22_DS1286_H
+
+#include <asm/sgi/hpc3.h>
+
+#define rtc_read(reg)		(hpc3c0->rtcregs[(reg)] & 0xff)
+#define rtc_write(data, reg)	do { hpc3c0->rtcregs[(reg)] = (data); } while(0)
+
+#endif /* __ASM_MACH_IP22_DS1286_H */
diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h
new file mode 100644
index 000000000000..30d42fcafe3d
--- /dev/null
+++ b/include/asm-mips/mach-ip22/spaces.h
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP22_SPACES_H
+#define _ASM_MACH_IP22_SPACES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MIPS32
+
+#define CAC_BASE		0x80000000
+#define IO_BASE			0xa0000000
+#define UNCAC_BASE		0xa0000000
+#define MAP_BASE		0xc0000000
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x80000000UL
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		0x20000000UL
+#endif
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+#define PAGE_OFFSET		0xffffffff80000000UL
+
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		(1UL << 59UL)
+#endif
+
+#define CAC_BASE		0xffffffff80000000
+#define IO_BASE			0xffffffffa0000000
+#define UNCAC_BASE		0xffffffffa0000000
+#define MAP_BASE		0xffffffffc0000000
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+#endif /* CONFIG_MIPS64 */
+
+#endif /* __ASM_MACH_IP22_SPACES_H */
diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
new file mode 100644
index 000000000000..fe96d7358517
--- /dev/null
+++ b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP27 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	1
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	1
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	64
+#define cpu_scache_line_size()	128
+
+#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ip27/irq.h b/include/asm-mips/mach-ip27/irq.h
new file mode 100644
index 000000000000..806213ce31b6
--- /dev/null
+++ b/include/asm-mips/mach-ip27/irq.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Kanoj Sarcar
+ */
+#ifndef __ASM_MACH_IP27_IRQ_H
+#define __ASM_MACH_IP27_IRQ_H
+
+#include <asm/sn/arch.h>
+
+/*
+ * A hardwired interrupt number is completly stupid for this system - a
+ * large configuration might have thousands if not tenthousands of
+ * interrupts.
+ */
+#define NR_IRQS 256
+
+#endif /* __ASM_MACH_IP27_IRQ_H */
diff --git a/include/asm-mips/mach-ip27/mangle-port.h b/include/asm-mips/mach-ip27/mangle-port.h
new file mode 100644
index 000000000000..f76c44880451
--- /dev/null
+++ b/include/asm-mips/mach-ip27/mangle-port.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_MANGLE_PORT_H
+#define __ASM_MACH_IP27_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/include/asm-mips/mach-ip27/mmzone.h b/include/asm-mips/mach-ip27/mmzone.h
new file mode 100644
index 000000000000..d3f566362e9d
--- /dev/null
+++ b/include/asm-mips/mach-ip27/mmzone.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+
+#define pa_to_nid(addr)		NASID_TO_COMPACT_NODEID(NASID_GET(addr))
+
+#define LEVELS_PER_SLICE        128
+
+struct slice_data {
+	unsigned long irq_alloc_mask[2];
+	unsigned long irq_enable_mask[2];
+	int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+	kern_vars_t	kern_vars;
+	DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
+	cpumask_t	h_cpus;
+	unsigned long slice_map;
+	struct slice_data slice[2];
+};
+
+struct node_data {
+	struct pglist_data pglist;
+	struct hub_data hub;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
+#define hub_data(n)		(&__node_data[(n)]->hub)
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h
new file mode 100644
index 000000000000..e3b3fe32eeb1
--- /dev/null
+++ b/include/asm-mips/mach-ip27/spaces.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP27_SPACES_H
+#define _ASM_MACH_IP27_SPACES_H
+
+/*
+ * IP27 uses the R10000's uncached attribute feature.  Attribute 3 selects
+ * uncached memory addressing.
+ */
+#define CAC_BASE		0xa800000000000000
+
+#define HSPEC_BASE		0x9000000000000000
+#define IO_BASE			0x9200000000000000
+#define MSPEC_BASE		0x9400000000000000
+#define UNCAC_BASE		0x9600000000000000
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_MSPEC(x)		(MSPEC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_HSPEC(x)		(HSPEC_BASE | ((x) & TO_PHYS_MASK))
+
+#define PAGE_OFFSET		CAC_BASE
+
+#define HIGHMEM_START		(~0UL)
+
+#endif /* _ASM_MACH_IP27_SPACES_H */
diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h
new file mode 100644
index 000000000000..a70a81257c3d
--- /dev/null
+++ b/include/asm-mips/mach-ip27/topology.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H	1
+
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+#include <asm/mmzone.h>
+
+#define cpu_to_node(cpu)	(cpu_data[(cpu)].p_nodeid)
+#define parent_node(node)	(node)
+#define node_to_cpumask(node)	(hub_data(node)->h_cpus)
+#define node_to_first_cpu(node)	(first_cpu(node_to_cpumask(node)))
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+
+#define node_distance(from, to)	(__node_distances[(from)][(to)])
+
+/* sched_domains SD_NODE_INIT for SGI IP27 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
new file mode 100644
index 000000000000..b932237f2193
--- /dev/null
+++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ilya A. Volynets-Evenbakh
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/config.h>
+
+/*
+ * R5000 has an interesting "restriction":  ll(d)/sc(d)
+ * instructions to XKPHYS region simply do uncached bus
+ * requests. This breaks all the atomic bitops functions.
+ * so, for 64bit IP32 kernel we just don't use ll/sc.
+ * This does not affect luserland.
+ */
+#if defined(CONFIG_CPU_R5000) && defined(CONFIG_MIPS64)
+#define cpu_has_llsc		0
+#else
+#define cpu_has_llsc		1
+#endif
+
+/* Settings which are common for all ip32 CPUs */
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_mips16		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+
+#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ip32/mangle-port.h b/include/asm-mips/mach-ip32/mangle-port.h
new file mode 100644
index 000000000000..6e25b52ed8f2
--- /dev/null
+++ b/include/asm-mips/mach-ip32/mangle-port.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ladislav Michl
+ * Copyright (C) 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP32_MANGLE_PORT_H
+#define __ASM_MACH_IP32_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	((port) ^ 3)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */
diff --git a/include/asm-mips/mach-ip32/mc146818rtc.h b/include/asm-mips/mach-ip32/mc146818rtc.h
new file mode 100644
index 000000000000..f5d780ff843f
--- /dev/null
+++ b/include/asm-mips/mach-ip32/mc146818rtc.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2000 Harald Koerfgen
+ *
+ * RTC routines for IP32 style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP32_MC146818RTC_H
+#define __ASM_MACH_IP32_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/ip32/mace.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+
+static unsigned char CMOS_READ(unsigned long addr)
+{
+	return mace->isa.rtc[addr << 8];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	mace->isa.rtc[addr << 8] = data;
+}
+
+/* FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-) */
+#define mc146818_decode_year(year) ((year) + 2000)
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MACH_IP32_MC146818RTC_H */
diff --git a/include/asm-mips/mach-ip32/spaces.h b/include/asm-mips/mach-ip32/spaces.h
new file mode 100644
index 000000000000..c7839f85c68d
--- /dev/null
+++ b/include/asm-mips/mach-ip32/spaces.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP32_SPACES_H
+#define _ASM_MACH_IP32_SPACES_H
+
+/*
+ * Memory above this physical address will be considered highmem.
+ * Fixme: 59 bits is a fictive number and makes assumptions about processors
+ * in the distant future.  Nobody will care for a few years :-)
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		(1UL << 59UL)
+#endif
+
+#define CAC_BASE		0x9800000000000000
+#define IO_BASE			0x9000000000000000
+#define UNCAC_BASE		0x9000000000000000
+#define MAP_BASE		0xc000000000000000
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+/*
+ * This handles the memory map.
+ */
+#define PAGE_OFFSET		CAC_BASE
+
+#endif /* __ASM_MACH_IP32_SPACES_H */
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
new file mode 100644
index 000000000000..ca57e7db98bb
--- /dev/null
+++ b/include/asm-mips/mach-ja/cpu-feature-overrides.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Jaguar ATX always has the RM9000 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+/*
+ * On the RM9000 we need to ensure that I-cache lines being fetches only
+ * contain valid instructions are funny things will happen.
+ */
+#define PLAT_TRAMPOLINE_STUFF_LINE	32UL
+
+#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ja/spaces.h b/include/asm-mips/mach-ja/spaces.h
new file mode 100644
index 000000000000..8466a0e69c79
--- /dev/null
+++ b/include/asm-mips/mach-ja/spaces.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_MACH_JA_SPACES_H
+#define __ASM_MACH_JA_SPACES_H
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#define HIGHMEM_START		0x08000000UL
+
+#include_next <spaces.h>
+
+#endif /* __ASM_MACH_JA_SPACES_H */
diff --git a/include/asm-mips/mach-jazz/floppy.h b/include/asm-mips/mach-jazz/floppy.h
new file mode 100644
index 000000000000..8cf0d042c864
--- /dev/null
+++ b/include/asm-mips/mach-jazz/floppy.h
@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_FLOPPY_H
+#define __ASM_MACH_JAZZ_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/pgtable.h>
+
+static inline unsigned char fd_inb(unsigned int port)
+{
+	unsigned char c;
+
+	c = *(volatile unsigned char *) port;
+	udelay(1);
+
+	return c;
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	*(volatile unsigned char *) port = value;
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	vdma_enable(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	vdma_disable(JAZZ_FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return 0;
+}
+
+static inline void fd_free_dma(void)
+{
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	vdma_set_mode(JAZZ_FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *a)
+{
+	vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a)));
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	vdma_set_count(JAZZ_FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return vdma_get_residue(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+}
+
+static inline void fd_disable_irq(void)
+{
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   SA_INTERRUPT | SA_SAMPLE_RANDOM, "floppy", NULL);
+}
+                                                                                
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return JAZZ_FDC_BASE;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+	if(!mem)
+		return 0;
+	vdma_alloc(CPHYSADDR(mem), size);	/* XXX error checking */
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	vdma_free(vdma_phys2log(CPHYSADDR(addr)));
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	/* XXX This is wrong for machines with ED 2.88mb disk drives like the
+	   Olivetti M700.  Anyway, we should suck this from the ARC
+	   firmware.  */
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_FLOPPY_H */
diff --git a/include/asm-mips/mach-jazz/mc146818rtc.h b/include/asm-mips/mach-jazz/mc146818rtc.h
new file mode 100644
index 000000000000..f44fdba1998b
--- /dev/null
+++ b/include/asm-mips/mach-jazz/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for Jazz style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_JAZZ_MC146818RTC_H
+#define __ASM_MACH_JAZZ_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/jazz.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+
+	return *(char *)JAZZ_RTC_BASE;
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	*(char *)JAZZ_RTC_BASE = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */
diff --git a/include/asm-mips/mach-jazz/param.h b/include/asm-mips/mach-jazz/param.h
new file mode 100644
index 000000000000..639763a517bc
--- /dev/null
+++ b/include/asm-mips/mach-jazz/param.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_PARAM_H
+#define __ASM_MACH_JAZZ_PARAM_H
+
+/*
+ * Jazz is currently using the internal 100Hz timer of the R4030
+ */
+#define HZ		100		/* Internal kernel timer frequency */
+
+#endif /* __ASM_MACH_JAZZ_PARAM_H */
diff --git a/include/asm-mips/mach-jazz/timex.h b/include/asm-mips/mach-jazz/timex.h
new file mode 100644
index 000000000000..93affa33dfa8
--- /dev/null
+++ b/include/asm-mips/mach-jazz/timex.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_TIMEX_H
+#define __ASM_MACH_JAZZ_TIMEX_H
+
+/*
+ * Jazz is still using the R4030 100Hz counter
+ */
+#define CLOCK_TICK_RATE		100
+
+#endif /* __ASM_MACH_JAZZ_TIMEX_H */
diff --git a/include/asm-mips/mach-jmr3927/asm/ds1742.h b/include/asm-mips/mach-jmr3927/asm/ds1742.h
new file mode 100644
index 000000000000..134a4b6c334a
--- /dev/null
+++ b/include/asm-mips/mach-jmr3927/asm/ds1742.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JMR3927_ASM_DS1742_H
+#define __ASM_MACH_JMR3927_ASM_DS1742_H
+
+#include <asm/jmr3927/jmr3927.h>
+
+#define rtc_read(reg)		(jmr3927_nvram_in(addr))
+#define rtc_write(data, reg)	(jmr3927_nvram_out((data),(reg)))
+
+#endif /* __ASM_MACH_JMR3927_ASM_DS1742_H */
diff --git a/include/asm-mips/mach-lasat/mach-gt64120.h b/include/asm-mips/mach-lasat/mach-gt64120.h
new file mode 100644
index 000000000000..1a9ad45cc135
--- /dev/null
+++ b/include/asm-mips/mach-lasat/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
+#define _ASM_GT64120_LASAT_GT64120_DEP_H
+
+/*
+ *   GT64120 config space base address on Lasat 100
+ */
+#define GT64120_BASE	(KSEG1ADDR(0x14000000))
+
+/*
+ *   PCI Bus allocation
+ *
+ *   (Guessing ...)
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-mips/cpu-feature-overrides.h
new file mode 100644
index 000000000000..6f51be571bf0
--- /dev/null
+++ b/include/asm-mips/mach-mips/cpu-feature-overrides.h
@@ -0,0 +1,67 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/config.h>
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4ktlb		1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4ktlb		1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-mips/mach-gt64120.h b/include/asm-mips/mach-mips/mach-gt64120.h
new file mode 100644
index 000000000000..511f7cf3a6be
--- /dev/null
+++ b/include/asm-mips/mach-mips/mach-gt64120.h
@@ -0,0 +1,28 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+
+#define MIPS_GT_BASE	0x1be00000
+
+extern unsigned long _pcictrl_gt64120;
+/*
+ *   GT64120 config space base address
+ */
+#define GT64120_BASE	_pcictrl_gt64120
+
+/*
+ *   PCI Bus allocation
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-mips/mc146818rtc.h b/include/asm-mips/mach-mips/mc146818rtc.h
new file mode 100644
index 000000000000..6730ba066576
--- /dev/null
+++ b/include/asm-mips/mach-mips/mc146818rtc.h
@@ -0,0 +1,48 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 by Ralf Baechle
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * RTC routines for Malta style attached PIIX4 device, which contains a
+ * Motorola MC146818A-compatible Real Time Clock.
+ */
+#ifndef __ASM_MACH_MALTA_MC146818RTC_H
+#define __ASM_MACH_MALTA_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	return inb(MALTA_RTC_DAT_REG);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	outb(data, MALTA_RTC_DAT_REG);
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+
+#endif /* __ASM_MACH_MALTA_MC146818RTC_H */
diff --git a/include/asm-mips/mach-ocelot/mach-gt64120.h b/include/asm-mips/mach-ocelot/mach-gt64120.h
new file mode 100644
index 000000000000..a62ecb53c751
--- /dev/null
+++ b/include/asm-mips/mach-ocelot/mach-gt64120.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H
+#define _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H
+
+/*
+ * PCI address allocation
+ */
+#define GT_PCI_MEM_BASE	(0x22000000UL)
+#define GT_PCI_MEM_SIZE	GT_DEF_PCI0_MEM0_SIZE
+#define GT_PCI_IO_BASE	(0x20000000UL)
+#define GT_PCI_IO_SIZE	GT_DEF_PCI0_IO_SIZE
+
+extern unsigned long gt64120_base;
+
+#define GT64120_BASE	(gt64120_base)
+
+/*
+ * GT timer irq
+ */
+#define	GT_TIMER		6
+
+#endif  /* _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
new file mode 100644
index 000000000000..7473512384bc
--- /dev/null
+++ b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ * Copyright (C) 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Ocelot-3 is based on Rm7900 processor which
+ * is based on the E9000 core.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex 	0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+/*
+ * On the RM9000 we need to ensure that I-cache lines being fetches only
+ * contain valid instructions are funny things will happen.
+ */
+#define PLAT_TRAMPOLINE_STUFF_LINE	32UL
+
+#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-pb1x00/mc146818rtc.h b/include/asm-mips/mach-pb1x00/mc146818rtc.h
new file mode 100644
index 000000000000..622c58710e5b
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
+#define __ASM_MACH_AU1XX_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define RTC_PORT(x)	(0x0c000000 + (x))
+#define RTC_IRQ		8
+#define PB1500_RTC_ADDR 0x0c000000
+
+static inline unsigned char CMOS_READ(unsigned long offset)
+{
+	offset <<= 2;
+	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
+{
+	offset <<= 2;
+	au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
new file mode 100644
index 000000000000..50c1e413a688
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -0,0 +1,172 @@
+/*
+ * Alchemy Semi PB1000 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1000_H
+#define __ASM_PB1000_H
+
+/* PCMCIA PB1000 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+#define PB1000_PCR     0xBE000000
+  #define PCR_SLOT_0_VPP0  (1<<0)
+  #define PCR_SLOT_0_VPP1  (1<<1)
+  #define PCR_SLOT_0_VCC0  (1<<2)
+  #define PCR_SLOT_0_VCC1  (1<<3)
+  #define PCR_SLOT_0_RST   (1<<4)
+
+  #define PCR_SLOT_1_VPP0  (1<<8)
+  #define PCR_SLOT_1_VPP1  (1<<9)
+  #define PCR_SLOT_1_VCC0  (1<<10)
+  #define PCR_SLOT_1_VCC1  (1<<11)
+  #define PCR_SLOT_1_RST   (1<<12)
+
+#define PB1000_MDR     0xBE000004
+  #define MDR_PI        (1<<5)  /* pcmcia int latch  */
+  #define MDR_EPI      (1<<14)  /* enable pcmcia int */
+  #define MDR_CPI      (1<<15)  /* clear pcmcia int  */
+
+#define PB1000_ACR1    0xBE000008
+  #define ACR1_SLOT_0_CD1    (1<<0)  /* card detect 1     */
+  #define ACR1_SLOT_0_CD2    (1<<1)  /* card detect 2     */
+  #define ACR1_SLOT_0_READY  (1<<2)  /* ready             */
+  #define ACR1_SLOT_0_STATUS (1<<3)  /* status change     */
+  #define ACR1_SLOT_0_VS1    (1<<4)  /* voltage sense 1   */
+  #define ACR1_SLOT_0_VS2    (1<<5)  /* voltage sense 2   */
+  #define ACR1_SLOT_0_INPACK (1<<6)  /* inpack pin status */
+  #define ACR1_SLOT_1_CD1    (1<<8)  /* card detect 1     */
+  #define ACR1_SLOT_1_CD2    (1<<9)  /* card detect 2     */
+  #define ACR1_SLOT_1_READY  (1<<10) /* ready             */
+  #define ACR1_SLOT_1_STATUS (1<<11) /* status change     */
+  #define ACR1_SLOT_1_VS1    (1<<12) /* voltage sense 1   */
+  #define ACR1_SLOT_1_VS2    (1<<13) /* voltage sense 2   */
+  #define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
+
+#define CPLD_AUX0      0xBE00000C
+#define CPLD_AUX1      0xBE000010
+#define CPLD_AUX2      0xBE000014
+
+/* Voltage levels */
+
+/* VPPEN1 - VPPEN0 */
+#define VPP_GND ((0<<1) | (0<<0))
+#define VPP_5V  ((1<<1) | (0<<0))
+#define VPP_3V  ((0<<1) | (1<<0))
+#define VPP_12V ((0<<1) | (1<<0))
+#define VPP_HIZ ((1<<1) | (1<<0))
+
+/* VCCEN1 - VCCEN0 */
+#define VCC_3V  ((0<<1) | (1<<0))
+#define VCC_5V  ((1<<1) | (0<<0))
+#define VCC_HIZ ((0<<1) | (0<<0))
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+
+/* PCI PB1000 specific defines */
+/* The reason these defines are here instead of au1000.h is because
+ * the Au1000 does not have a PCI bus controller so the PCI implementation
+ * on the some of the older Pb1000 boards was very board specific.
+ */
+#define PCI_CONFIG_BASE   0xBA020000 /* the only external slot */
+
+#define SDRAM_DEVID       0xBA010000
+#define SDRAM_CMD         0xBA010004
+#define SDRAM_CLASS       0xBA010008
+#define SDRAM_MISC        0xBA01000C
+#define SDRAM_MBAR        0xBA010010
+
+#define PCI_IO_DATA_PORT  0xBA800000
+
+#define PCI_IO_ADDR       0xBE00001C
+#define PCI_INT_ACK       0xBBC00000
+#define PCI_IO_READ       0xBBC00020
+#define PCI_IO_WRITE      0xBBC00030
+
+#define PCI_BRIDGE_CONFIG 0xBE000018
+
+#define PCI_IO_START      0x10000000
+#define PCI_IO_END        0x1000ffff
+#define PCI_MEM_START     0x18000000
+#define PCI_MEM_END       0x18ffffff
+
+#define PCI_FIRST_DEVFN   0
+#define PCI_LAST_DEVFN    1
+
+static inline u8 au_pci_io_readb(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
+	return (readl(PCI_IO_DATA_PORT) & 0xff);
+}
+
+static inline u16 au_pci_io_readw(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
+	return (readl(PCI_IO_DATA_PORT) & 0xffff);
+}
+
+static inline u32 au_pci_io_readl(u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
+	return readl(PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writeb(u8 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writew(u16 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void au_pci_io_writel(u32 val, u32 addr)
+{
+	writel(addr, PCI_IO_ADDR);
+	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
+	writel(val, PCI_IO_DATA_PORT);
+}
+
+static inline void set_sdram_extbyte(void)
+{
+	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
+}
+
+static inline void set_slot_extbyte(void)
+{
+	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
+}
+#endif /* __ASM_PB1000_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h
new file mode 100644
index 000000000000..4c5a1cd01841
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi PB1100 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT          0xAE000000
+#define BOARD_STATUS_REG      0xAE000004
+  #define PB1100_ROM_SEL         (1<<15)
+  #define PB1100_ROM_SIZ         (1<<14)
+  #define PB1100_SWAP_BOOT       (1<<13)
+  #define PB1100_FLASH_WP        (1<<12)
+  #define PB1100_ROM_H_STS       (1<<11)
+  #define PB1100_ROM_L_STS       (1<<10)
+  #define PB1100_FLASH_H_STS      (1<<9)
+  #define PB1100_FLASH_L_STS      (1<<8)
+  #define PB1100_SRAM_SIZ         (1<<7)
+  #define PB1100_TSC_BUSY         (1<<6)
+  #define PB1100_PCMCIA_VS_MASK   (3<<4)
+  #define PB1100_RS232_CD         (1<<3)
+  #define PB1100_RS232_CTS        (1<<2)
+  #define PB1100_RS232_DSR        (1<<1)
+  #define PB1100_RS232_RI         (1<<0)
+
+#define PB1100_IRDA_RS232     0xAE00000C
+  #define PB1100_IRDA_FULL       (0<<14) /* full power */
+  #define PB1100_IRDA_SHUTDOWN   (1<<14)
+  #define PB1100_IRDA_TT         (2<<14) /* 2/3 power */
+  #define PB1100_IRDA_OT         (3<<14) /* 1/3 power */
+  #define PB1100_IRDA_FIR        (1<<13)
+
+#define PCMCIA_BOARD_REG     0xAE000010
+  #define PB1100_SD_WP1_RO       (1<<15) /* read only */
+  #define PB1100_SD_WP0_RO       (1<<14) /* read only */
+  #define PB1100_SD_PWR1         (1<<11) /* applies power to SD1 */
+  #define PB1100_SD_PWR0         (1<<10) /* applies power to SD0 */
+  #define PB1100_SEL_SD_CONN1     (1<<9)
+  #define PB1100_SEL_SD_CONN0     (1<<8)
+  #define PC_DEASSERT_RST         (1<<7)
+  #define PC_DRV_EN               (1<<4)
+
+#define PB1100_G_CONTROL      0xAE000014 /* graphics control */
+
+#define PB1100_RST_VDDI       0xAE00001C
+  #define PB1100_SOFT_RESET      (1<<15) /* clear to reset the board */
+  #define PB1100_VDDI_MASK        (0x1F)
+
+#define PB1100_LEDS           0xAE000018
+
+/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED        0xAE000018
+
+/* PCMCIA PB1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1100_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h
new file mode 100644
index 000000000000..d6c779747b3c
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1500.h
@@ -0,0 +1,51 @@
+/*
+ * Alchemy Semi PB1500 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+
+#define IDENT_BOARD_REG           0xAE000000
+#define BOARD_STATUS_REG          0xAE000004
+#define PCI_BOARD_REG             0xAE000010
+#define PCMCIA_BOARD_REG          0xAE000010
+  #define PC_DEASSERT_RST               0x80
+  #define PC_DRV_EN                     0x10 
+#define PB1500_G_CONTROL          0xAE000014
+#define PB1500_RST_VDDI           0xAE00001C
+#define PB1500_LEDS               0xAE000018
+  
+#define PB1500_HEX_LED            0xAF000004
+#define PB1500_HEX_LED_BLANK      0xAF000008
+
+/* PCMCIA PB1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1500_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
new file mode 100644
index 000000000000..431d6088ea96
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -0,0 +1,169 @@
+/*
+ * AMD Alchemy Semi PB1550 Referrence Board
+ * Board Registers defines.
+ *
+ * Copyright 2004 Embedded Edge LLC.
+ * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1550_H
+#define __ASM_PB1550_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE        PSC0_BASE_ADDR
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE      PSC2_BASE_ADDR
+#define I2S_PSC_BASE        PSC3_BASE_ADDR
+
+#define BCSR_PHYS_ADDR 0xAF000000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 pci;
+		u16 reserved5;
+	/*18*/	u16 leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_PCMCIA0FI	0x0010
+#define BCSR_STATUS_PCMCIA1FI	0x0020
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH	0x0080
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_ROMBUSY	0x0200
+#define BCSR_STATUS_USBOTGID	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+#define BCSR_STATUS_U3RXD	0x8000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_PHY0	0x0001
+#define BCSR_RESETS_PHY1	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_WSC		0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_DMAREQ	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_PCI_M66EN		0x0001
+#define BCSR_PCI_M33		0x0100
+#define BCSR_PCI_EXTERNARB	0x0200
+#define BCSR_PCI_GPIO200RST	0x0400
+#define BCSR_PCI_CLKOUT		0x0800
+#define BCSR_PCI_CFGHOST	0x1000
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_USER_ONLY
+#endif
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H			(18 >> 2)
+#define NAND_T_PUL			(30 >> 2)
+#define NAND_T_SU			(30 >> 2)
+#define NAND_T_WH			(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
+			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
+			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
+			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+
+#endif /* __ASM_PB1550_H */
diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
new file mode 100644
index 000000000000..f48736032b2a
--- /dev/null
+++ b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ *
+ * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors.
+ */
+#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+
+#include <cpu-feature-overrides.h>
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4ktlb		1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_watch		0
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0	/* No S-cache on R5000 I think ...  */
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	0	/* No S-cache on R5000 I think ...  */
+
+#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-rm200/mc146818rtc.h b/include/asm-mips/mach-rm200/mc146818rtc.h
new file mode 100644
index 000000000000..d37ae68dc6a3
--- /dev/null
+++ b/include/asm-mips/mach-rm200/mc146818rtc.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip with ARC epoch.
+ */
+#ifndef __ASM_MACH_RM200_MC146818RTC_H
+#define __ASM_MACH_RM200_MC146818RTC_H
+
+#define mc146818_decode_year(year) ((year) + 1980)
+
+#include_next <mc146818rtc.h>
+
+#endif /* __ASM_MACH_RM200_MC146818RTC_H */
diff --git a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
new file mode 100644
index 000000000000..a3a2cc6014b2
--- /dev/null
+++ b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Sibyte are MIPS64 processors weired to a specific configuration
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		1
+#define cpu_has_ejtag		1
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	1
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-vr41xx/timex.h b/include/asm-mips/mach-vr41xx/timex.h
new file mode 100644
index 000000000000..8d71485d003a
--- /dev/null
+++ b/include/asm-mips/mach-vr41xx/timex.h
@@ -0,0 +1,18 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+/*
+ * Changes:
+ *  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  - CLOCK_TICK_RATE is changed into 32768 from 6144000.
+ */
+#ifndef __ASM_MACH_VR41XX_TIMEX_H
+#define __ASM_MACH_VR41XX_TIMEX_H
+
+#define CLOCK_TICK_RATE		32768
+
+#endif /* __ASM_MACH_VR41XX_TIMEX_H */
diff --git a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
new file mode 100644
index 000000000000..58603e3daca6
--- /dev/null
+++ b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Jaguar ATX always has the RM9000 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_subset_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+/*
+ * On the RM9000 we need to ensure that I-cache lines being fetches only
+ * contain valid instructions are funny things will happen.
+ */
+#define PLAT_TRAMPOLINE_STUFF_LINE	32UL
+
+#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/marvell.h b/include/asm-mips/marvell.h
new file mode 100644
index 000000000000..9225b3397a4f
--- /dev/null
+++ b/include/asm-mips/marvell.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ */
+#ifndef __ASM_MIPS_MARVELL_H
+#define __ASM_MIPS_MARVELL_H
+
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+
+extern unsigned long marvell_base;
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.
+ */
+#define __MV_READ(ofs)							\
+	(*(volatile u32 *)(marvell_base+(ofs)))
+#define __MV_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(marvell_base+(ofs)) = (data); } while (0)
+
+#define MV_READ(ofs)		le32_to_cpu(__MV_READ(ofs))
+#define MV_WRITE(ofs, data)	__MV_WRITE(ofs, cpu_to_le32(data))
+
+#define MV_READ_16(ofs)							\
+        le16_to_cpu(*(volatile u16 *)(marvell_base+(ofs)))
+#define MV_WRITE_16(ofs, data)  \
+        *(volatile u16 *)(marvell_base+(ofs)) = cpu_to_le16(data)
+
+#define MV_READ_8(ofs)							\
+	*(volatile u8 *)(marvell_base+(ofs))
+#define MV_WRITE_8(ofs, data)						\
+	*(volatile u8 *)(marvell_base+(ofs)) = data
+
+#define MV_SET_REG_BITS(ofs, bits)					\
+	(*((volatile u32 *)(marvell_base + (ofs)))) |= ((u32)cpu_to_le32(bits))
+#define MV_RESET_REG_BITS(ofs, bits)					\
+	(*((volatile u32 *)(marvell_base + (ofs)))) &= ~((u32)cpu_to_le32(bits))
+
+extern struct pci_ops mv_pci_ops;
+
+struct mv_pci_controller {
+	struct pci_controller   pcic;
+
+	/*
+	 * GT-64240/MV-64340 specific, per host bus information
+	 */
+	unsigned long   config_addr;
+	unsigned long   config_vreg;
+};
+
+#endif	/* __ASM_MIPS_MARVELL_H */
diff --git a/include/asm-mips/mc146818-time.h b/include/asm-mips/mc146818-time.h
new file mode 100644
index 000000000000..a2c2d2c24303
--- /dev/null
+++ b/include/asm-mips/mc146818-time.h
@@ -0,0 +1,128 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_MC146818_TIME_H
+#define __ASM_MC146818_TIME_H
+
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+
+/*
+ * For check timing call set_rtc_mmss() 500ms; used in timer interrupt.
+ */
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
+{
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+	int retval = 0;
+
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	return retval;
+}
+
+static inline unsigned long mc146818_get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int i;
+
+	/*
+	 * The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+
+	/* read RTC exactly on falling edge of update flag */
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+			break;
+	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
+		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+			break;
+
+	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(day);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+	year = mc146818_decode_year(year);
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* __ASM_MC146818_TIME_H */
diff --git a/include/asm-mips/mc146818rtc.h b/include/asm-mips/mc146818rtc.h
new file mode 100644
index 000000000000..68b4da6d520b
--- /dev/null
+++ b/include/asm-mips/mc146818rtc.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mc146818rtc.h>
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h
new file mode 100644
index 000000000000..0998151fb3a1
--- /dev/null
+++ b/include/asm-mips/mips-boards/atlas.h
@@ -0,0 +1,64 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines of the Atlas board specific address-MAP, registers, etc.
+ *
+ */
+#ifndef _MIPS_ATLAS_H
+#define _MIPS_ATLAS_H
+
+#include <asm/addrspace.h>
+
+/*
+ * Atlas RTC-device indirect register access.
+ */
+#define ATLAS_RTC_ADR_REG       0x1f000800
+#define ATLAS_RTC_DAT_REG       0x1f000808
+
+
+/*
+ * Atlas interrupt controller register base.
+ */
+#define ATLAS_ICTRL_REGS_BASE   0x1f000000
+
+/*
+ * Atlas UART register base.
+ */
+#define ATLAS_UART_REGS_BASE    0x1f000900
+#define ATLAS_BASE_BAUD ( 3686400 / 16 )
+
+/*
+ * Atlas PSU standby register.
+ */
+#define ATLAS_PSUSTBY_REG       0x1f000600
+#define ATLAS_GOSTBY            0x4d
+
+/*
+ * We make a universal assumption about the way the bootloader (YAMON)
+ * have located the Philips SAA9730 chip.
+ * This is not ideal, but is needed for setting up remote debugging as
+ * soon as possible.
+ */
+#define ATLAS_SAA9730_REG	0x10800000
+
+#define ATLAS_SAA9730_BAUDCLOCK	3692300
+
+#endif /* !(_MIPS_ATLAS_H) */
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
new file mode 100644
index 000000000000..bba35c183d08
--- /dev/null
+++ b/include/asm-mips/mips-boards/atlasint.h
@@ -0,0 +1,84 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Atlas interrupt controller.
+ *
+ */
+#ifndef _MIPS_ATLASINT_H
+#define _MIPS_ATLASINT_H
+
+#define ATLASINT_BASE		1
+#define ATLASINT_UART		(ATLASINT_BASE+0)
+#define ATLASINT_TIM0		(ATLASINT_BASE+1)
+#define ATLASINT_RES2		(ATLASINT_BASE+2)
+#define ATLASINT_RES3		(ATLASINT_BASE+3)
+#define ATLASINT_RTC		(ATLASINT_BASE+4)
+#define ATLASINT_COREHI		(ATLASINT_BASE+5)
+#define ATLASINT_CORELO		(ATLASINT_BASE+6)
+#define ATLASINT_RES7		(ATLASINT_BASE+7)
+#define ATLASINT_PCIA		(ATLASINT_BASE+8)
+#define ATLASINT_PCIB		(ATLASINT_BASE+9)
+#define ATLASINT_PCIC		(ATLASINT_BASE+10)
+#define ATLASINT_PCID		(ATLASINT_BASE+11)
+#define ATLASINT_ENUM		(ATLASINT_BASE+12)
+#define ATLASINT_DEG		(ATLASINT_BASE+13)
+#define ATLASINT_ATXFAIL	(ATLASINT_BASE+14)
+#define ATLASINT_INTA		(ATLASINT_BASE+15)
+#define ATLASINT_INTB		(ATLASINT_BASE+16)
+#define ATLASINT_ETH		ATLASINT_INTB
+#define ATLASINT_INTC		(ATLASINT_BASE+17)
+#define ATLASINT_SCSI		ATLASINT_INTC
+#define ATLASINT_INTD		(ATLASINT_BASE+18)
+#define ATLASINT_SERR		(ATLASINT_BASE+19)
+#define ATLASINT_RES20		(ATLASINT_BASE+20)
+#define ATLASINT_RES21		(ATLASINT_BASE+21)
+#define ATLASINT_RES22		(ATLASINT_BASE+22)
+#define ATLASINT_RES23		(ATLASINT_BASE+23)
+#define ATLASINT_RES24		(ATLASINT_BASE+24)
+#define ATLASINT_RES25		(ATLASINT_BASE+25)
+#define ATLASINT_RES26		(ATLASINT_BASE+26)
+#define ATLASINT_RES27		(ATLASINT_BASE+27)
+#define ATLASINT_RES28		(ATLASINT_BASE+28)
+#define ATLASINT_RES29		(ATLASINT_BASE+29)
+#define ATLASINT_RES30		(ATLASINT_BASE+30)
+#define ATLASINT_RES31		(ATLASINT_BASE+31)
+#define ATLASINT_END		(ATLASINT_BASE+31)
+
+/*
+ * Atlas registers are memory mapped on 64-bit aligned boundaries and
+ * only word access are allowed.
+ */
+struct atlas_ictrl_regs {
+        volatile unsigned int intraw;
+        int dummy1;
+        volatile unsigned int intseten;
+        int dummy2;
+        volatile unsigned int intrsten;
+        int dummy3;
+        volatile unsigned int intenable;
+        int dummy4;
+        volatile unsigned int intstatus;
+        int dummy5;
+};
+
+extern void atlasint_init(void);
+
+#endif /* !(_MIPS_ATLASINT_H) */
diff --git a/include/asm-mips/mips-boards/bonito64.h b/include/asm-mips/mips-boards/bonito64.h
new file mode 100644
index 000000000000..cd7125610100
--- /dev/null
+++ b/include/asm-mips/mips-boards/bonito64.h
@@ -0,0 +1,431 @@
+/*
+ * Bonito Register Map
+ *
+ * This file is the original bonito.h from Algorithmics with minor changes
+ * to fit into linux.
+ *
+ * Copyright (c) 1999 Algorithmics Ltd
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2001 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * Algorithmics gives permission for anyone to use and modify this file
+ * without any obligation or license condition except that you retain
+ * this copyright message in any source redistribution in whole or part.
+ *
+ */
+
+/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
+/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+
+#ifndef _ASM_MIPS_BOARDS_BONITO64_H
+#define _ASM_MIPS_BOARDS_BONITO64_H
+
+#ifdef __ASSEMBLY__
+
+/* offsets from base register */
+#define BONITO(x)	(x)
+
+#else /* !__ASSEMBLY__ */
+
+/*
+ * Algorithmics Bonito64 system controller register base.
+ */
+extern unsigned long _pcictrl_bonito;
+extern unsigned long _pcictrl_bonito_pcicfg;
+
+#define BONITO(x)		*(volatile u32 *)(_pcictrl_bonito + (x))
+
+#endif /* __ASSEMBLY__ */
+
+
+#define BONITO_BOOT_BASE		0x1fc00000
+#define BONITO_BOOT_SIZE		0x00100000
+#define BONITO_BOOT_TOP 		(BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
+#define BONITO_FLASH_BASE		0x1c000000
+#define BONITO_FLASH_SIZE		0x03000000
+#define BONITO_FLASH_TOP		(BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
+#define BONITO_SOCKET_BASE		0x1f800000
+#define BONITO_SOCKET_SIZE		0x00400000
+#define BONITO_SOCKET_TOP		(BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
+#define BONITO_REG_BASE 		0x1fe00000
+#define BONITO_REG_SIZE 		0x00040000
+#define BONITO_REG_TOP			(BONITO_REG_BASE+BONITO_REG_SIZE-1)
+#define BONITO_DEV_BASE 		0x1ff00000
+#define BONITO_DEV_SIZE 		0x00100000
+#define BONITO_DEV_TOP			(BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
+#define BONITO_PCILO_BASE		0x10000000
+#define BONITO_PCILO_SIZE		0x0c000000
+#define BONITO_PCILO_TOP		(BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1)
+#define BONITO_PCILO0_BASE		0x10000000
+#define BONITO_PCILO1_BASE		0x14000000
+#define BONITO_PCILO2_BASE		0x18000000
+#define BONITO_PCIHI_BASE		0x20000000
+#define BONITO_PCIHI_SIZE		0x20000000
+#define BONITO_PCIHI_TOP		(BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1)
+#define BONITO_PCIIO_BASE		0x1fd00000
+#define BONITO_PCIIO_SIZE		0x00100000
+#define BONITO_PCIIO_TOP		(BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1)
+#define BONITO_PCICFG_BASE		0x1fe80000
+#define BONITO_PCICFG_SIZE		0x00080000
+#define BONITO_PCICFG_TOP		(BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1)
+
+
+/* Bonito Register Bases */
+
+#define BONITO_PCICONFIGBASE		0x00
+#define BONITO_REGBASE			0x100
+
+
+/* PCI Configuration  Registers */
+
+#define BONITO_PCI_REG(x)               BONITO(BONITO_PCICONFIGBASE + (x))
+#define BONITO_PCIDID			BONITO_PCI_REG(0x00)
+#define BONITO_PCICMD			BONITO_PCI_REG(0x04)
+#define BONITO_PCICLASS 		BONITO_PCI_REG(0x08)
+#define BONITO_PCILTIMER		BONITO_PCI_REG(0x0c)
+#define BONITO_PCIBASE0 		BONITO_PCI_REG(0x10)
+#define BONITO_PCIBASE1 		BONITO_PCI_REG(0x14)
+#define BONITO_PCIBASE2 		BONITO_PCI_REG(0x18)
+#define BONITO_PCIEXPRBASE		BONITO_PCI_REG(0x30)
+#define BONITO_PCIINT			BONITO_PCI_REG(0x3c)
+
+#define BONITO_PCICMD_PERR_CLR		0x80000000
+#define BONITO_PCICMD_SERR_CLR		0x40000000
+#define BONITO_PCICMD_MABORT_CLR	0x20000000
+#define BONITO_PCICMD_MTABORT_CLR	0x10000000
+#define BONITO_PCICMD_TABORT_CLR	0x08000000
+#define BONITO_PCICMD_MPERR_CLR 	0x01000000
+#define BONITO_PCICMD_PERRRESPEN	0x00000040
+#define BONITO_PCICMD_ASTEPEN		0x00000080
+#define BONITO_PCICMD_SERREN		0x00000100
+#define BONITO_PCILTIMER_BUSLATENCY	0x0000ff00
+#define BONITO_PCILTIMER_BUSLATENCY_SHIFT	8
+
+
+
+
+/* 1. Bonito h/w Configuration */
+/* Power on register */
+
+#define BONITO_BONPONCFG		BONITO(BONITO_REGBASE + 0x00)
+
+#define BONITO_BONPONCFG_SYSCONTROLLERRD	0x00040000
+#define BONITO_BONPONCFG_ROMCS1SAMP	0x00020000
+#define BONITO_BONPONCFG_ROMCS0SAMP	0x00010000
+#define BONITO_BONPONCFG_CPUBIGEND	0x00004000
+/* Added by RPF 11-9-00 */
+#define BONITO_BONPONCFG_BURSTORDER	0x00001000
+/* --- */
+#define BONITO_BONPONCFG_CPUPARITY	0x00002000
+#define BONITO_BONPONCFG_CPUTYPE	0x00000007
+#define BONITO_BONPONCFG_CPUTYPE_SHIFT	0
+#define BONITO_BONPONCFG_PCIRESET_OUT	0x00000008
+#define BONITO_BONPONCFG_IS_ARBITER	0x00000010
+#define BONITO_BONPONCFG_ROMBOOT	0x000000c0
+#define BONITO_BONPONCFG_ROMBOOT_SHIFT	6
+
+#define BONITO_BONPONCFG_ROMBOOT_FLASH	(0x0<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SOCKET (0x1<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SDRAM	(0x2<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_CPURESET	(0x3<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+
+#define BONITO_BONPONCFG_ROMCS0WIDTH	0x00000100
+#define BONITO_BONPONCFG_ROMCS1WIDTH	0x00000200
+#define BONITO_BONPONCFG_ROMCS0FAST	0x00000400
+#define BONITO_BONPONCFG_ROMCS1FAST	0x00000800
+#define BONITO_BONPONCFG_CONFIG_DIS	0x00000020
+
+
+/* Other Bonito configuration */
+
+#define BONITO_BONGENCFG_OFFSET         0x4
+#define BONITO_BONGENCFG		BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET)
+
+#define BONITO_BONGENCFG_DEBUGMODE	0x00000001
+#define BONITO_BONGENCFG_SNOOPEN	0x00000002
+#define BONITO_BONGENCFG_CPUSELFRESET	0x00000004
+
+#define BONITO_BONGENCFG_FORCE_IRQA	0x00000008
+#define BONITO_BONGENCFG_IRQA_ISOUT	0x00000010
+#define BONITO_BONGENCFG_IRQA_FROM_INT1 0x00000020
+#define BONITO_BONGENCFG_BYTESWAP	0x00000040
+
+#define BONITO_BONGENCFG_UNCACHED	0x00000080
+#define BONITO_BONGENCFG_PREFETCHEN	0x00000100
+#define BONITO_BONGENCFG_WBEHINDEN	0x00000200
+#define BONITO_BONGENCFG_CACHEALG	0x00000c00
+#define BONITO_BONGENCFG_CACHEALG_SHIFT 10
+#define BONITO_BONGENCFG_PCIQUEUE	0x00001000
+#define BONITO_BONGENCFG_CACHESTOP	0x00002000
+#define BONITO_BONGENCFG_MSTRBYTESWAP	0x00004000
+#define BONITO_BONGENCFG_BUSERREN	0x00008000
+#define BONITO_BONGENCFG_NORETRYTIMEOUT 0x00010000
+#define BONITO_BONGENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* 2. IO & IDE configuration */
+
+#define BONITO_IODEVCFG 		BONITO(BONITO_REGBASE + 0x08)
+
+/* 3. IO & IDE configuration */
+
+#define BONITO_SDCFG			BONITO(BONITO_REGBASE + 0x0c)
+
+/* 4. PCI address map control */
+
+#define BONITO_PCIMAP			BONITO(BONITO_REGBASE + 0x10)
+#define BONITO_PCIMEMBASECFG		BONITO(BONITO_REGBASE + 0x14)
+#define BONITO_PCIMAP_CFG		BONITO(BONITO_REGBASE + 0x18)
+
+/* 5. ICU & GPIO regs */
+
+/* GPIO Regs - r/w */
+
+#define BONITO_GPIODATA_OFFSET          0x1c
+#define BONITO_GPIODATA 		BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
+#define BONITO_GPIOIE			BONITO(BONITO_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define BONITO_INTEDGE			BONITO(BONITO_REGBASE + 0x24)
+#define BONITO_INTSTEER 		BONITO(BONITO_REGBASE + 0x28)
+#define BONITO_INTPOL			BONITO(BONITO_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define BONITO_INTENSET 		BONITO(BONITO_REGBASE + 0x30)
+#define BONITO_INTENCLR 		BONITO(BONITO_REGBASE + 0x34)
+#define BONITO_INTEN			BONITO(BONITO_REGBASE + 0x38)
+#define BONITO_INTISR			BONITO(BONITO_REGBASE + 0x3c)
+
+/* PCI mail boxes */
+
+#define BONITO_PCIMAIL0_OFFSET          0x40
+#define BONITO_PCIMAIL1_OFFSET          0x44
+#define BONITO_PCIMAIL2_OFFSET          0x48
+#define BONITO_PCIMAIL3_OFFSET          0x4c
+#define BONITO_PCIMAIL0 		BONITO(BONITO_REGBASE + 0x40)
+#define BONITO_PCIMAIL1 		BONITO(BONITO_REGBASE + 0x44)
+#define BONITO_PCIMAIL2 		BONITO(BONITO_REGBASE + 0x48)
+#define BONITO_PCIMAIL3 		BONITO(BONITO_REGBASE + 0x4c)
+
+
+/* 6. PCI cache */
+
+#define BONITO_PCICACHECTRL		BONITO(BONITO_REGBASE + 0x50)
+#define BONITO_PCICACHETAG		BONITO(BONITO_REGBASE + 0x54)
+
+#define BONITO_PCIBADADDR		BONITO(BONITO_REGBASE + 0x58)
+#define BONITO_PCIMSTAT 		BONITO(BONITO_REGBASE + 0x5c)
+
+
+/*
+#define BONITO_PCIRDPOST		BONITO(BONITO_REGBASE + 0x60)
+#define BONITO_PCIDATA			BONITO(BONITO_REGBASE + 0x64)
+*/
+
+/* 7. IDE DMA & Copier */
+
+#define BONITO_CONFIGBASE		0x000
+#define BONITO_BONITOBASE		0x100
+#define BONITO_LDMABASE 		0x200
+#define BONITO_COPBASE			0x300
+#define BONITO_REG_BLOCKMASK		0x300
+
+#define BONITO_LDMACTRL 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMASTAT 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMAADDR 		BONITO(BONITO_LDMABASE + 0x4)
+#define BONITO_LDMAGO			BONITO(BONITO_LDMABASE + 0x8)
+#define BONITO_LDMADATA 		BONITO(BONITO_LDMABASE + 0xc)
+
+#define BONITO_COPCTRL			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPSTAT			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPPADDR 		BONITO(BONITO_COPBASE + 0x4)
+#define BONITO_COPDADDR 		BONITO(BONITO_COPBASE + 0x8)
+#define BONITO_COPGO			BONITO(BONITO_COPBASE + 0xc)
+
+
+/* ###### Bit Definitions for individual Registers #### */
+
+/* Gen DMA. */
+
+#define BONITO_IDECOPDADDR_DMA_DADDR	0x0ffffffc
+#define BONITO_IDECOPDADDR_DMA_DADDR_SHIFT	2
+#define BONITO_IDECOPPADDR_DMA_PADDR	0xfffffffc
+#define BONITO_IDECOPPADDR_DMA_PADDR_SHIFT	2
+#define BONITO_IDECOPGO_DMA_SIZE	0x0000fffe
+#define BONITO_IDECOPGO_DMA_SIZE_SHIFT	0
+#define BONITO_IDECOPGO_DMA_WRITE	0x00010000
+#define BONITO_IDECOPGO_DMAWCOUNT	0x000f0000
+#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT	16
+
+#define BONITO_IDECOPCTRL_DMA_STARTBIT	0x80000000
+#define BONITO_IDECOPCTRL_DMA_RSTBIT	0x40000000
+
+/* DRAM - sdCfg */
+
+#define BONITO_SDCFG_AROWBITS		0x00000003
+#define BONITO_SDCFG_AROWBITS_SHIFT	0
+#define BONITO_SDCFG_ACOLBITS		0x0000000c
+#define BONITO_SDCFG_ACOLBITS_SHIFT	2
+#define BONITO_SDCFG_ABANKBIT		0x00000010
+#define BONITO_SDCFG_ASIDES		0x00000020
+#define BONITO_SDCFG_AABSENT		0x00000040
+#define BONITO_SDCFG_AWIDTH64		0x00000080
+
+#define BONITO_SDCFG_BROWBITS		0x00000300
+#define BONITO_SDCFG_BROWBITS_SHIFT	8
+#define BONITO_SDCFG_BCOLBITS		0x00000c00
+#define BONITO_SDCFG_BCOLBITS_SHIFT	10
+#define BONITO_SDCFG_BBANKBIT		0x00001000
+#define BONITO_SDCFG_BSIDES		0x00002000
+#define BONITO_SDCFG_BABSENT		0x00004000
+#define BONITO_SDCFG_BWIDTH64		0x00008000
+
+#define BONITO_SDCFG_EXTRDDATA		0x00010000
+#define BONITO_SDCFG_EXTRASCAS		0x00020000
+#define BONITO_SDCFG_EXTPRECH		0x00040000
+#define BONITO_SDCFG_EXTRASWIDTH	0x00180000
+#define BONITO_SDCFG_EXTRASWIDTH_SHIFT	19
+/* Changed by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMMODESET	0x00200000
+/* --- */
+#define BONITO_SDCFG_DRAMEXTREGS	0x00400000
+#define BONITO_SDCFG_DRAMPARITY 	0x00800000
+/* Added by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMBURSTLEN 	0x03000000
+#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT	24
+#define BONITO_SDCFG_DRAMMODESET_DONE 	0x80000000
+/* --- */
+
+/* PCI Cache - pciCacheCtrl */
+
+#define BONITO_PCICACHECTRL_CACHECMD	0x00000007
+#define BONITO_PCICACHECTRL_CACHECMD_SHIFT	0
+#define BONITO_PCICACHECTRL_CACHECMDLINE	0x00000018
+#define BONITO_PCICACHECTRL_CACHECMDLINE_SHIFT	3
+#define BONITO_PCICACHECTRL_CMDEXEC	0x00000020
+
+#define BONITO_PCICACHECTRL_IOBCCOH_PRES	0x00000100
+#define BONITO_PCICACHECTRL_IOBCCOH_EN	0x00000200
+#define BONITO_PCICACHECTRL_CPUCOH_PRES	0x00000400
+#define BONITO_PCICACHECTRL_CPUCOH_EN	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_CS0	0x00000001
+#define BONITO_IODEVCFG_SPEEDBIT_CS0	0x00000002
+#define BONITO_IODEVCFG_MOREABITS_CS0	0x00000004
+
+#define BONITO_IODEVCFG_BUFFBIT_CS1	0x00000008
+#define BONITO_IODEVCFG_SPEEDBIT_CS1	0x00000010
+#define BONITO_IODEVCFG_MOREABITS_CS1	0x00000020
+
+#define BONITO_IODEVCFG_BUFFBIT_CS2	0x00000040
+#define BONITO_IODEVCFG_SPEEDBIT_CS2	0x00000080
+#define BONITO_IODEVCFG_MOREABITS_CS2	0x00000100
+
+#define BONITO_IODEVCFG_BUFFBIT_CS3	0x00000200
+#define BONITO_IODEVCFG_SPEEDBIT_CS3	0x00000400
+#define BONITO_IODEVCFG_MOREABITS_CS3	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_IDE	0x00001000
+#define BONITO_IODEVCFG_SPEEDBIT_IDE	0x00002000
+#define BONITO_IODEVCFG_WORDSWAPBIT_IDE 0x00004000
+#define BONITO_IODEVCFG_MODEBIT_IDE	0x00008000
+#define BONITO_IODEVCFG_DMAON_IDE	0x001f0000
+#define BONITO_IODEVCFG_DMAON_IDE_SHIFT 16
+#define BONITO_IODEVCFG_DMAOFF_IDE	0x01e00000
+#define BONITO_IODEVCFG_DMAOFF_IDE_SHIFT	21
+#define BONITO_IODEVCFG_EPROMSPLIT	0x02000000
+/* Added by RPF 11-9-00 */
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD	0xfc000000
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD_SHIFT 26
+/* --- */
+
+/* gpio */
+#define BONITO_GPIO_GPIOW		0x000003ff
+#define BONITO_GPIO_GPIOW_SHIFT 	0
+#define BONITO_GPIO_GPIOR		0x01ff0000
+#define BONITO_GPIO_GPIOR_SHIFT 	16
+#define BONITO_GPIO_GPINR		0xfe000000
+#define BONITO_GPIO_GPINR_SHIFT 	25
+#define BONITO_GPIO_IOW(N)		(1<<(BONITO_GPIO_GPIOW_SHIFT+(N)))
+#define BONITO_GPIO_IOR(N)		(1<<(BONITO_GPIO_GPIOR_SHIFT+(N)))
+#define BONITO_GPIO_INR(N)		(1<<(BONITO_GPIO_GPINR_SHIFT+(N)))
+
+/* ICU */
+#define BONITO_ICU_MBOXES		0x0000000f
+#define BONITO_ICU_MBOXES_SHIFT 	0
+#define BONITO_ICU_DMARDY		0x00000010
+#define BONITO_ICU_DMAEMPTY		0x00000020
+#define BONITO_ICU_COPYRDY		0x00000040
+#define BONITO_ICU_COPYEMPTY		0x00000080
+#define BONITO_ICU_COPYERR		0x00000100
+#define BONITO_ICU_PCIIRQ		0x00000200
+#define BONITO_ICU_MASTERERR		0x00000400
+#define BONITO_ICU_SYSTEMERR		0x00000800
+#define BONITO_ICU_DRAMPERR		0x00001000
+#define BONITO_ICU_RETRYERR		0x00002000
+#define BONITO_ICU_GPIOS		0x01ff0000
+#define BONITO_ICU_GPIOS_SHIFT		16
+#define BONITO_ICU_GPINS		0x7e000000
+#define BONITO_ICU_GPINS_SHIFT		25
+#define BONITO_ICU_MBOX(N)		(1<<(BONITO_ICU_MBOXES_SHIFT+(N)))
+#define BONITO_ICU_GPIO(N)		(1<<(BONITO_ICU_GPIOS_SHIFT+(N)))
+#define BONITO_ICU_GPIN(N)		(1<<(BONITO_ICU_GPINS_SHIFT+(N)))
+
+/* pcimap */
+
+#define BONITO_PCIMAP_PCIMAP_LO0	0x0000003f
+#define BONITO_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define BONITO_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define BONITO_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define BONITO_PCIMAP_PCIMAP_LO2	0x0003f000
+#define BONITO_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define BONITO_PCIMAP_PCIMAP_2		0x00040000
+#define BONITO_PCIMAP_WIN(WIN,ADDR)	((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#define BONITO_PCIMAP_WINSIZE           (1<<26)
+#define BONITO_PCIMAP_WINOFFSET(ADDR)	((ADDR) & (BONITO_PCIMAP_WINSIZE - 1))
+#define BONITO_PCIMAP_WINBASE(ADDR)	((ADDR) << 26)
+
+/* pcimembaseCfg */
+
+#define BONITO_PCIMEMBASECFG_MASK               0xf0000000
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK	0x0000001f
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT	0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS	0x000003e0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT	5
+#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED	0x00000400
+#define BONITO_PCIMEMBASECFG_MEMBASE0_IO	0x00000800
+
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK	0x0001f000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT	12
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS	0x003e0000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT	17
+#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED	0x00400000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_IO	0x00800000
+
+#define BONITO_PCIMEMBASECFG_ASHIFT	23
+#define BONITO_PCIMEMBASECFG_AMASK              0x007fffff
+#define BONITO_PCIMEMBASECFGSIZE(WIN,SIZE)	(((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)
+#define BONITO_PCIMEMBASECFGBASE(WIN,BASE)	(((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS)
+
+#define BONITO_PCIMEMBASECFG_SIZE(WIN,CFG)  (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK)
+
+
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN,CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN,CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN,CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+
+#define BONITO_PCITOPHYS(WIN,ADDR,CFG)          ( \
+                                                  (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN,CFG)))) | \
+                                                  (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN,CFG)) \
+                                                )
+
+/* PCICmd */
+
+#define BONITO_PCICMD_MEMEN		0x00000002
+#define BONITO_PCICMD_MSTREN		0x00000004
+
+
+#endif /* _ASM_MIPS_BOARDS_BONITO64_H */
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
new file mode 100644
index 000000000000..65d1d16eab16
--- /dev/null
+++ b/include/asm-mips/mips-boards/generic.h
@@ -0,0 +1,82 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the MIPS boards specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_GENERIC_H
+#define __ASM_MIPS_BOARDS_GENERIC_H
+
+#include <linux/config.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/mips-boards/bonito64.h>
+
+/*
+ * Display register base.
+ */
+#ifdef CONFIG_MIPS_SEAD
+#define ASCII_DISPLAY_POS_BASE     0x1f0005c0
+#else
+#define ASCII_DISPLAY_WORD_BASE    0x1f000410
+#define ASCII_DISPLAY_POS_BASE     0x1f000418
+#endif
+
+
+/*
+ * Yamon Prom print address.
+ */
+#define YAMON_PROM_PRINT_ADDR      0x1fc00504
+
+
+/*
+ * Reset register.
+ */
+#ifdef CONFIG_MIPS_SEAD
+#define SOFTRES_REG       0x1e800050
+#define GORESET           0x4d
+#else
+#define SOFTRES_REG       0x1f000500
+#define GORESET           0x42
+#endif
+
+/*
+ * Revision register.
+ */
+#define MIPS_REVISION_REG                  0x1fc00010
+#define MIPS_REVISION_CORID_QED_RM5261     0
+#define MIPS_REVISION_CORID_CORE_LV        1
+#define MIPS_REVISION_CORID_BONITO64       2
+#define MIPS_REVISION_CORID_CORE_20K       3
+#define MIPS_REVISION_CORID_CORE_FPGA      4
+#define MIPS_REVISION_CORID_CORE_MSC       5
+#define MIPS_REVISION_CORID_CORE_EMUL      6
+#define MIPS_REVISION_CORID_CORE_FPGA2     7
+#define MIPS_REVISION_CORID_CORE_FPGAR2    8
+
+/**** Artificial corid defines ****/
+/*
+ *  CoreEMUL with   Bonito   System Controller is treated like a Core20K
+ *  CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC
+ */
+#define MIPS_REVISION_CORID_CORE_EMUL_BON  0x63
+#define MIPS_REVISION_CORID_CORE_EMUL_MSC  0x65
+
+#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f)
+
+extern unsigned int mips_revision_corid;
+
+#endif  /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/include/asm-mips/mips-boards/malta.h b/include/asm-mips/mips-boards/malta.h
new file mode 100644
index 000000000000..b0ba3c5a921e
--- /dev/null
+++ b/include/asm-mips/mips-boards/malta.h
@@ -0,0 +1,75 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the Malta board specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_MALTA_H
+#define __ASM_MIPS_BOARDS_MALTA_H
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mips-boards/msc01_pci.h>
+#include <asm/gt64120.h>
+
+/*
+ * Malta I/O ports base address for the Galileo GT64120 and Algorithmics
+ * Bonito system controllers.
+ */
+#define MALTA_GT_PORT_BASE      get_gt_port_base(GT_PCI0IOLD_OFS)
+#define MALTA_BONITO_PORT_BASE  ((unsigned long)ioremap (0x1fd00000, 0x10000))
+#define MALTA_MSC_PORT_BASE     get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	addr = GT_READ(reg);
+	return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	MSC_READ(reg, addr);
+	return (unsigned long) ioremap(addr, 0x10000);
+}
+
+/*
+ * Malta RTC-device indirect register access.
+ */
+#define MALTA_RTC_ADR_REG       0x70
+#define MALTA_RTC_DAT_REG       0x71
+
+/*
+ * Malta SMSC FDC37M817 Super I/O Controller register.
+ */
+#define SMSC_CONFIG_REG		0x3f0
+#define SMSC_DATA_REG		0x3f1
+
+#define SMSC_CONFIG_DEVNUM	0x7
+#define SMSC_CONFIG_ACTIVATE	0x30
+#define SMSC_CONFIG_ENTER	0x55
+#define SMSC_CONFIG_EXIT	0xaa
+
+#define SMSC_CONFIG_DEVNUM_FLOPPY     0
+
+#define SMSC_CONFIG_ACTIVATE_ENABLE   1
+
+#define SMSC_WRITE(x,a)     outb(x,a)
+
+#define MALTA_JMPRS_REG		0x1f000210
+
+#endif /* __ASM_MIPS_BOARDS_MALTA_H */
diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h
new file mode 100644
index 000000000000..376181882e81
--- /dev/null
+++ b/include/asm-mips/mips-boards/maltaint.h
@@ -0,0 +1,33 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Malta interrupt controller.
+ *
+ */
+#ifndef _MIPS_MALTAINT_H
+#define _MIPS_MALTAINT_H
+
+/* Number of IRQ supported on hw interrupt 0. */
+#define MALTAINT_END      16
+
+extern void maltaint_init(void);
+
+#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h
new file mode 100644
index 000000000000..6b2a87a38f4b
--- /dev/null
+++ b/include/asm-mips/mips-boards/msc01_pci.h
@@ -0,0 +1,256 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H
+#define __ASM_MIPS_BOARDS_MSC01_PCI_H
+
+/*
+ * Register offset addresses
+ */
+
+#define MSC01_PCI_ID_OFS		0x0000
+#define MSC01_PCI_SC2PMBASL_OFS		0x0208
+#define MSC01_PCI_SC2PMMSKL_OFS		0x0218
+#define MSC01_PCI_SC2PMMAPL_OFS		0x0228
+#define MSC01_PCI_SC2PIOBASL_OFS	0x0248
+#define MSC01_PCI_SC2PIOMSKL_OFS	0x0258
+#define MSC01_PCI_SC2PIOMAPL_OFS	0x0268
+#define MSC01_PCI_P2SCMSKL_OFS		0x0308
+#define MSC01_PCI_P2SCMAPL_OFS		0x0318
+#define MSC01_PCI_INTCFG_OFS		0x0600
+#define MSC01_PCI_INTSTAT_OFS		0x0608
+#define MSC01_PCI_CFGADDR_OFS		0x0610
+#define MSC01_PCI_CFGDATA_OFS		0x0618
+#define MSC01_PCI_IACK_OFS		0x0620
+#define MSC01_PCI_HEAD0_OFS		0x2000  /* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS		0x2008  /* Status, Command */
+#define MSC01_PCI_HEAD2_OFS		0x2010  /* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS		0x2018  /* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS		0x2020  /* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS		0x2028  /* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS		0x2030  /* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS		0x2038  /* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS		0x2040  /* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS		0x2048  /* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS		0x2050  /* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS		0x2058  /* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS		0x2060  /* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS		0x2068  /* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS		0x2070  /* reserved */
+#define MSC01_PCI_HEAD15_OFS		0x2078  /* Maxl, ming, intpin, int */
+#define MSC01_PCI_BAR0_OFS		0x2220
+#define MSC01_PCI_CFG_OFS		0x2380
+#define MSC01_PCI_SWAP_OFS		0x2388
+
+
+/*****************************************************************************
+ * Register encodings
+ ****************************************************************************/
+
+#define MSC01_PCI_ID_ID_SHF		16
+#define MSC01_PCI_ID_ID_MSK		0x00ff0000
+#define MSC01_PCI_ID_ID_HOSTBRIDGE	82
+#define MSC01_PCI_ID_MAR_SHF		8
+#define MSC01_PCI_ID_MAR_MSK		0x0000ff00
+#define MSC01_PCI_ID_MIR_SHF		0
+#define MSC01_PCI_ID_MIR_MSK		0x000000ff
+
+#define MSC01_PCI_SC2PMBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PMBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PMMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PMMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PIOBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PIOMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PIOMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMSKL_MSK_SHF	24
+#define MSC01_PCI_P2SCMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMAPL_MAP_SHF	24
+#define MSC01_PCI_P2SCMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_INTCFG_RST_SHF        10
+#define MSC01_PCI_INTCFG_RST_MSK        0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT        0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF        9
+#define MSC01_PCI_INTCFG_MWE_MSK        0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT        0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF        8
+#define MSC01_PCI_INTCFG_DTO_MSK        0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT        0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF         7
+#define MSC01_PCI_INTCFG_MA_MSK         0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT         0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF         6
+#define MSC01_PCI_INTCFG_TA_MSK         0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT         0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF        5
+#define MSC01_PCI_INTCFG_RTY_MSK        0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT        0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF        4
+#define MSC01_PCI_INTCFG_MWP_MSK        0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT        0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF        3
+#define MSC01_PCI_INTCFG_MRP_MSK        0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT        0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF        2
+#define MSC01_PCI_INTCFG_SWP_MSK        0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT        0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF        1
+#define MSC01_PCI_INTCFG_SRP_MSK        0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT        0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF         0
+#define MSC01_PCI_INTCFG_SE_MSK         0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT         0x00000001
+
+#define MSC01_PCI_INTSTAT_RST_SHF       10
+#define MSC01_PCI_INTSTAT_RST_MSK       0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT       0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF       9
+#define MSC01_PCI_INTSTAT_MWE_MSK       0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT       0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF       8
+#define MSC01_PCI_INTSTAT_DTO_MSK       0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT       0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF        7
+#define MSC01_PCI_INTSTAT_MA_MSK        0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT        0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF        6
+#define MSC01_PCI_INTSTAT_TA_MSK        0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT        0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF       5
+#define MSC01_PCI_INTSTAT_RTY_MSK       0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT       0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF       4
+#define MSC01_PCI_INTSTAT_MWP_MSK       0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT       0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF       3
+#define MSC01_PCI_INTSTAT_MRP_MSK       0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT       0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF       2
+#define MSC01_PCI_INTSTAT_SWP_MSK       0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT       0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF       1
+#define MSC01_PCI_INTSTAT_SRP_MSK       0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT       0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF        0
+#define MSC01_PCI_INTSTAT_SE_MSK        0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT        0x00000001
+
+#define MSC01_PCI_CFGADDR_BNUM_SHF	16
+#define MSC01_PCI_CFGADDR_BNUM_MSK	0x00ff0000
+#define MSC01_PCI_CFGADDR_DNUM_SHF	11
+#define MSC01_PCI_CFGADDR_DNUM_MSK	0x0000f800
+#define MSC01_PCI_CFGADDR_FNUM_SHF	8
+#define MSC01_PCI_CFGADDR_FNUM_MSK	0x00000700
+#define MSC01_PCI_CFGADDR_RNUM_SHF	2
+#define MSC01_PCI_CFGADDR_RNUM_MSK	0x000000fc
+
+#define MSC01_PCI_CFGDATA_DATA_SHF	0
+#define MSC01_PCI_CFGDATA_DATA_MSK	0xffffffff
+
+/* The defines below are ONLY valid for a MEM bar! */
+#define MSC01_PCI_BAR0_SIZE_SHF	        4
+#define MSC01_PCI_BAR0_SIZE_MSK	        0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF	        3
+#define MSC01_PCI_BAR0_P_MSK	        0x00000008
+#define MSC01_PCI_BAR0_P_BIT	        MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF	        1
+#define MSC01_PCI_BAR0_D_MSK	        0x00000006
+#define MSC01_PCI_BAR0_T_SHF	        0
+#define MSC01_PCI_BAR0_T_MSK	        0x00000001
+#define MSC01_PCI_BAR0_T_BIT	        MSC01_PCI_BAR0_T_MSK
+
+
+#define MSC01_PCI_CFG_RA_SHF	        17
+#define MSC01_PCI_CFG_RA_MSK	        0x00020000
+#define MSC01_PCI_CFG_RA_BIT	        MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF	        16
+#define MSC01_PCI_CFG_G_MSK	        0x00010000
+#define MSC01_PCI_CFG_G_BIT	        MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF	        15
+#define MSC01_PCI_CFG_EN_MSK	        0x00008000
+#define MSC01_PCI_CFG_EN_BIT	        MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF       0
+#define MSC01_PCI_CFG_MAXRTRY_MSK       0x000000ff
+
+#define MSC01_PCI_SWAP_IO_SHF		18
+#define MSC01_PCI_SWAP_IO_MSK		0x000c0000
+#define MSC01_PCI_SWAP_MEM_SHF		16
+#define MSC01_PCI_SWAP_MEM_MSK		0x00030000
+#define MSC01_PCI_SWAP_BAR0_SHF		0
+#define MSC01_PCI_SWAP_BAR0_MSK		0x00000003
+#define MSC01_PCI_SWAP_NOSWAP		0
+#define MSC01_PCI_SWAP_BYTESWAP		1
+
+/*
+ * MIPS System controller PCI register base.
+ *
+ * FIXME - are these macros specific to Malta and co or to the MSC?  If the
+ * latter, they should be moved elsewhere.
+ */
+#define MIPS_MSC01_PCI_REG_BASE	0x1bd00000
+
+extern unsigned long _pcictrl_msc;
+
+#define MSC01_PCI_REG_BASE	_pcictrl_msc
+
+#define MSC_WRITE(reg, data)	do { *(volatile u32 *)(reg) = data; } while (0)
+#define MSC_READ(reg, data)	do { data = *(volatile u32 *)(reg); } while (0)
+
+/*
+ * Registers absolute addresses
+ */
+
+#define MSC01_PCI_ID            (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL     (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL     (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL     (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL    (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL    (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL    (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL      (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL      (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG        (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT       (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR       (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA       (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_IACK		(MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
+#define MSC01_PCI_HEAD0		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
+#define MSC01_PCI_HEAD1		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
+#define MSC01_PCI_HEAD2		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS)
+#define MSC01_PCI_HEAD3		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS)
+#define MSC01_PCI_HEAD4		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS)
+#define MSC01_PCI_HEAD5		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS)
+#define MSC01_PCI_HEAD6		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS)
+#define MSC01_PCI_HEAD7		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS)
+#define MSC01_PCI_HEAD8		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS)
+#define MSC01_PCI_HEAD9		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS)
+#define MSC01_PCI_HEAD10	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS)
+#define MSC01_PCI_HEAD11	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD12	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD13	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD14	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15        (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_BAR0		(MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
+#define MSC01_PCI_CFG		(MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
+#define MSC01_PCI_SWAP		(MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */
diff --git a/include/asm-mips/mips-boards/piix4.h b/include/asm-mips/mips-boards/piix4.h
new file mode 100644
index 000000000000..2971d60f2e95
--- /dev/null
+++ b/include/asm-mips/mips-boards/piix4.h
@@ -0,0 +1,80 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Register definitions for Intel PIIX4 South Bridge Device.
+ */
+#ifndef __ASM_MIPS_BOARDS_PIIX4_H
+#define __ASM_MIPS_BOARDS_PIIX4_H
+
+/************************************************************************
+ *  IO register offsets
+ ************************************************************************/
+#define PIIX4_ICTLR1_ICW1	0x20
+#define PIIX4_ICTLR1_ICW2	0x21
+#define PIIX4_ICTLR1_ICW3	0x21
+#define PIIX4_ICTLR1_ICW4	0x21
+#define PIIX4_ICTLR2_ICW1	0xa0
+#define PIIX4_ICTLR2_ICW2	0xa1
+#define PIIX4_ICTLR2_ICW3	0xa1
+#define PIIX4_ICTLR2_ICW4	0xa1
+#define PIIX4_ICTLR1_OCW1	0x21
+#define PIIX4_ICTLR1_OCW2	0x20
+#define PIIX4_ICTLR1_OCW3	0x20
+#define PIIX4_ICTLR1_OCW4	0x20
+#define PIIX4_ICTLR2_OCW1	0xa1
+#define PIIX4_ICTLR2_OCW2	0xa0
+#define PIIX4_ICTLR2_OCW3	0xa0
+#define PIIX4_ICTLR2_OCW4	0xa0
+
+
+/************************************************************************
+ *  Register encodings.
+ ************************************************************************/
+#define PIIX4_OCW2_NSEOI	(0x1 << 5)
+#define PIIX4_OCW2_SEOI		(0x3 << 5)
+#define PIIX4_OCW2_RNSEOI	(0x5 << 5)
+#define PIIX4_OCW2_RAEOIS	(0x4 << 5)
+#define PIIX4_OCW2_RAEOIC	(0x0 << 5)
+#define PIIX4_OCW2_RSEOI	(0x7 << 5)
+#define PIIX4_OCW2_SP		(0x6 << 5)
+#define PIIX4_OCW2_NOP		(0x2 << 5)
+
+#define PIIX4_OCW2_SEL          (0x0 << 3)
+
+#define PIIX4_OCW2_ILS_0	0
+#define PIIX4_OCW2_ILS_1	1
+#define PIIX4_OCW2_ILS_2	2
+#define PIIX4_OCW2_ILS_3	3
+#define PIIX4_OCW2_ILS_4	4
+#define PIIX4_OCW2_ILS_5	5
+#define PIIX4_OCW2_ILS_6	6
+#define PIIX4_OCW2_ILS_7	7
+#define PIIX4_OCW2_ILS_8	0
+#define PIIX4_OCW2_ILS_9	1
+#define PIIX4_OCW2_ILS_10	2
+#define PIIX4_OCW2_ILS_11	3
+#define PIIX4_OCW2_ILS_12	4
+#define PIIX4_OCW2_ILS_13	5
+#define PIIX4_OCW2_ILS_14	6
+#define PIIX4_OCW2_ILS_15	7
+
+#define PIIX4_OCW3_SEL          (0x1 << 3)
+
+#define PIIX4_OCW3_IRR          0x2
+#define PIIX4_OCW3_ISR          0x3
+
+#endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/include/asm-mips/mips-boards/prom.h b/include/asm-mips/mips-boards/prom.h
new file mode 100644
index 000000000000..4168c7fcd43e
--- /dev/null
+++ b/include/asm-mips/mips-boards/prom.h
@@ -0,0 +1,49 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void setup_prom_printf(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern unsigned long prom_free_prom_memory (void);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+        unsigned long base; /* Within KSEG0. */
+        unsigned int size;  /* In bytes. */
+        unsigned int type;  /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
diff --git a/include/asm-mips/mips-boards/saa9730_uart.h b/include/asm-mips/mips-boards/saa9730_uart.h
new file mode 100644
index 000000000000..c913143d58ec
--- /dev/null
+++ b/include/asm-mips/mips-boards/saa9730_uart.h
@@ -0,0 +1,69 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Register definitions for the UART part of the Philips SAA9730 chip.
+ *
+ */
+
+#ifndef SAA9730_UART_H
+#define SAA9730_UART_H
+
+/* The SAA9730 UART register map, as seen via the PCI bus */
+
+#define SAA9730_UART_REGS_ADDR	0x21800
+
+struct uart_saa9730_regmap {
+	volatile unsigned char Thr_Rbr;
+	volatile unsigned char Ier;
+	volatile unsigned char Iir_Fcr;
+	volatile unsigned char Lcr;
+	volatile unsigned char Mcr;
+	volatile unsigned char Lsr;
+	volatile unsigned char Msr;
+	volatile unsigned char Scr;
+	volatile unsigned char BaudDivLsb;
+	volatile unsigned char BaudDivMsb;
+	volatile unsigned char Junk0;
+	volatile unsigned char Junk1;
+	volatile unsigned int Config;		/* 0x2180c */
+	volatile unsigned int TxStart;		/* 0x21810 */
+	volatile unsigned int TxLength;		/* 0x21814 */
+	volatile unsigned int TxCounter;	/* 0x21818 */
+	volatile unsigned int RxStart;		/* 0x2181c */
+	volatile unsigned int RxLength;		/* 0x21820 */
+	volatile unsigned int RxCounter;	/* 0x21824 */
+};
+typedef volatile struct uart_saa9730_regmap t_uart_saa9730_regmap;
+
+/*
+ * Only a subset of the UART control bits are defined here,
+ * enough to make the serial debug port work.
+ */
+
+#define SAA9730_LCR_DATA8	0x03
+
+#define SAA9730_MCR_DTR		0x01
+#define SAA9730_MCR_RTS		0x02
+
+#define SAA9730_LSR_DR		0x01
+#define SAA9730_LSR_THRE	0x20
+
+#endif /* !(SAA9730_UART_H) */
diff --git a/include/asm-mips/mips-boards/sead.h b/include/asm-mips/mips-boards/sead.h
new file mode 100644
index 000000000000..68c69de0b66f
--- /dev/null
+++ b/include/asm-mips/mips-boards/sead.h
@@ -0,0 +1,36 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines of the SEAD board specific address-MAP, registers, etc.
+ *
+ */
+#ifndef _MIPS_SEAD_H
+#define _MIPS_SEAD_H
+
+#include <asm/addrspace.h>
+
+/*
+ * SEAD UART register base.
+ */
+#define SEAD_UART0_REGS_BASE    (0x1f000800)
+#define SEAD_BASE_BAUD ( 3686400 / 16 )
+
+#endif /* !(_MIPS_SEAD_H) */
diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h
new file mode 100644
index 000000000000..c3dcfcb928b6
--- /dev/null
+++ b/include/asm-mips/mips-boards/seadint.h
@@ -0,0 +1,28 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines for the SEAD interrupt controller.
+ */
+#ifndef _MIPS_SEADINT_H
+#define _MIPS_SEADINT_H
+
+#define SEADINT_UART0     2
+#define SEADINT_UART1     3
+
+extern void seadint_init(void);
+
+#endif /* !(_MIPS_SEADINT_H) */
diff --git a/include/asm-mips/mipsprom.h b/include/asm-mips/mipsprom.h
new file mode 100644
index 000000000000..ce7cff7f1e8e
--- /dev/null
+++ b/include/asm-mips/mipsprom.h
@@ -0,0 +1,74 @@
+#ifndef __ASM_MIPS_PROM_H
+#define __ASM_MIPS_PROM_H
+
+#define PROM_RESET		0
+#define PROM_EXEC		1
+#define PROM_RESTART		2
+#define PROM_REINIT		3
+#define PROM_REBOOT		4
+#define PROM_AUTOBOOT		5
+#define PROM_OPEN		6
+#define PROM_READ		7
+#define PROM_WRITE		8
+#define PROM_IOCTL		9
+#define PROM_CLOSE		10
+#define PROM_GETCHAR		11
+#define PROM_PUTCHAR		12
+#define PROM_SHOWCHAR		13	/* XXX */
+#define PROM_GETS		14	/* XXX */
+#define PROM_PUTS		15	/* XXX */
+#define PROM_PRINTF		16	/* XXX */
+
+/* What are these for? */
+#define PROM_INITPROTO		17	/* XXX */
+#define PROM_PROTOENABLE	18	/* XXX */
+#define PROM_PROTODISABLE	19	/* XXX */
+#define PROM_GETPKT		20	/* XXX */
+#define PROM_PUTPKT		21	/* XXX */
+
+/* More PROM shit.  Probably has to do with VME RMW cycles??? */
+#define PROM_ORW_RMW		22	/* XXX */
+#define PROM_ORH_RMW		23	/* XXX */
+#define PROM_ORB_RMW		24	/* XXX */
+#define PROM_ANDW_RMW		25	/* XXX */
+#define PROM_ANDH_RMW		26	/* XXX */
+#define PROM_ANDB_RMW		27	/* XXX */
+
+/* Cache handling stuff */
+#define PROM_FLUSHCACHE		28	/* XXX */
+#define PROM_CLEARCACHE		29	/* XXX */
+
+/* Libc alike stuff */
+#define PROM_SETJMP		30	/* XXX */
+#define PROM_LONGJMP		31	/* XXX */
+#define PROM_BEVUTLB		32	/* XXX */
+#define PROM_GETENV		33	/* XXX */
+#define PROM_SETENV		34	/* XXX */
+#define PROM_ATOB		35	/* XXX */
+#define PROM_STRCMP		36	/* XXX */
+#define PROM_STRLEN		37	/* XXX */
+#define PROM_STRCPY		38	/* XXX */
+#define PROM_STRCAT		39	/* XXX */
+
+/* Misc stuff */
+#define PROM_PARSER		40	/* XXX */
+#define PROM_RANGE		41	/* XXX */
+#define PROM_ARGVIZE		42	/* XXX */
+#define PROM_HELP		43	/* XXX */
+
+/* Entry points for some PROM commands */
+#define PROM_DUMPCMD		44	/* XXX */
+#define PROM_SETENVCMD		45	/* XXX */
+#define PROM_UNSETENVCMD	46	/* XXX */
+#define PROM_PRINTENVCMD	47	/* XXX */
+#define PROM_BEVEXCEPT		48	/* XXX */
+#define PROM_ENABLECMD		49	/* XXX */
+#define PROM_DISABLECMD		50	/* XXX */
+
+#define PROM_CLEARNOFAULT	51	/* XXX */
+#define PROM_NOTIMPLEMENT	52	/* XXX */
+
+#define PROM_NV_GET		53	/* XXX */
+#define PROM_NV_SET		54	/* XXX */
+
+#endif /* __ASM_MIPS_PROM_H */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
new file mode 100644
index 000000000000..2197aa4ce456
--- /dev/null
+++ b/include/asm-mips/mipsregs.h
@@ -0,0 +1,1018 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003  Maciej W. Rozycki
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/hazards.h>
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
+
+/*
+ * R4640/R4650 cp0 register names.  These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux.  A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0  $26
+#define CP0_S1_DERRADDR1  $27
+#define CP0_S1_INTCONTROL $20
+
+/*
+ *  TX39 Series
+ */
+#define CP0_TX39_CACHE	$7
+
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION   $0
+#define CP1_STATUS     $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
+#define FPU_CSR_COND    0x00800000      /* $fcc0 */
+#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
+#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
+#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
+#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
+#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
+#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
+#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
+#define FPU_CSR_COND7   0x80000000      /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X   0x0003f000
+#define FPU_CSR_UNI_X   0x00020000
+#define FPU_CSR_INV_X   0x00010000
+#define FPU_CSR_DIV_X   0x00008000
+#define FPU_CSR_OVF_X   0x00004000
+#define FPU_CSR_UDF_X   0x00002000
+#define FPU_CSR_INE_X   0x00001000
+
+#define FPU_CSR_ALL_E   0x00000f80
+#define FPU_CSR_INV_E   0x00000800
+#define FPU_CSR_DIV_E   0x00000400
+#define FPU_CSR_OVF_E   0x00000200
+#define FPU_CSR_UDF_E   0x00000100
+#define FPU_CSR_INE_E   0x00000080
+
+#define FPU_CSR_ALL_S   0x0000007c
+#define FPU_CSR_INV_S   0x00000040
+#define FPU_CSR_DIV_S   0x00000020
+#define FPU_CSR_OVF_S   0x00000010
+#define FPU_CSR_UDF_S   0x00000008
+#define FPU_CSR_INE_S   0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN      0x0     /* nearest */
+#define FPU_CSR_RZ      0x1     /* towards zero */
+#define FPU_CSR_RU      0x2     /* towards +Infinity */
+#define FPU_CSR_RD      0x3     /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#ifdef CONFIG_CPU_VR41XX
+
+/* Why doesn't stupidity hurt ... */
+
+#define PM_1K		0x00000000
+#define PM_4K		0x00001800
+#define PM_16K		0x00007800
+#define PM_64K		0x0001f800
+#define PM_256K		0x0007f800
+
+#else
+
+#define PM_4K		0x00000000
+#define PM_16K		0x00006000
+#define PM_64K		0x0001e000
+#define PM_256K		0x0007e000
+#define PM_1M		0x001fe000
+#define PM_4M		0x007fe000
+#define PM_16M		0x01ffe000
+#define PM_64M		0x07ffe000
+#define PM_256M		0x1fffe000
+
+#endif
+
+/*
+ * Default page size for a given kernel configuration
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define PM_DEFAULT_MASK	PM_64K
+#else
+#error Bad page size configuration!
+#endif
+
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K		12
+#define PL_16K		14
+#define PL_64K		16
+#define PL_256K		18
+#define PL_1M		20
+#define PL_4M		22
+#define PL_16M		24
+#define PL_64M		26
+#define PL_256M		28
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0          (_ULCAST_(1) <<  8)
+#define IE_SW1          (_ULCAST_(1) <<  9)
+#define IE_IRQ0         (_ULCAST_(1) << 10)
+#define IE_IRQ1         (_ULCAST_(1) << 11)
+#define IE_IRQ2         (_ULCAST_(1) << 12)
+#define IE_IRQ3         (_ULCAST_(1) << 13)
+#define IE_IRQ4         (_ULCAST_(1) << 14)
+#define IE_IRQ5         (_ULCAST_(1) << 15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0           (_ULCAST_(1) <<  8)
+#define C_SW1           (_ULCAST_(1) <<  9)
+#define C_IRQ0          (_ULCAST_(1) << 10)
+#define C_IRQ1          (_ULCAST_(1) << 11)
+#define C_IRQ2          (_ULCAST_(1) << 12)
+#define C_IRQ3          (_ULCAST_(1) << 13)
+#define C_IRQ4          (_ULCAST_(1) << 14)
+#define C_IRQ5          (_ULCAST_(1) << 15)
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE			0x00000001
+#define ST0_EXL			0x00000002
+#define ST0_ERL			0x00000004
+#define ST0_KSU			0x00000018
+#  define KSU_USER		0x00000010
+#  define KSU_SUPERVISOR	0x00000008
+#  define KSU_KERNEL		0x00000000
+#define ST0_UX			0x00000020
+#define ST0_SX			0x00000040
+#define ST0_KX 			0x00000080
+#define ST0_DE			0x00010000
+#define ST0_CE			0x00020000
+
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace.  This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO			0x08000000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC                 0x00000001
+#define ST0_KUC			0x00000002
+#define ST0_IEP			0x00000004
+#define ST0_KUP			0x00000008
+#define ST0_IEO			0x00000010
+#define ST0_KUO			0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC			0x00010000
+#define ST0_SWC			0x00020000
+#define ST0_CM			0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM			(_ULCAST_(1) <<  4)
+#define ST0_IL			(_ULCAST_(1) << 23)
+#define ST0_DL			(_ULCAST_(1) << 24)
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT	19
+#define TX39_CONF_ICS_MASK	0x00380000
+#define TX39_CONF_ICS_1KB 	0x00000000
+#define TX39_CONF_ICS_2KB 	0x00080000
+#define TX39_CONF_ICS_4KB 	0x00100000
+#define TX39_CONF_ICS_8KB 	0x00180000
+#define TX39_CONF_ICS_16KB 	0x00200000
+
+#define TX39_CONF_DCS_SHIFT	16
+#define TX39_CONF_DCS_MASK	0x00070000
+#define TX39_CONF_DCS_1KB 	0x00000000
+#define TX39_CONF_DCS_2KB 	0x00010000
+#define TX39_CONF_DCS_4KB 	0x00020000
+#define TX39_CONF_DCS_8KB 	0x00030000
+#define TX39_CONF_DCS_16KB 	0x00040000
+
+#define TX39_CONF_CWFON 	0x00004000
+#define TX39_CONF_WBON  	0x00002000
+#define TX39_CONF_RF_SHIFT	10
+#define TX39_CONF_RF_MASK	0x00000c00
+#define TX39_CONF_DOZE		0x00000200
+#define TX39_CONF_HALT		0x00000100
+#define TX39_CONF_LOCK		0x00000080
+#define TX39_CONF_ICE		0x00000020
+#define TX39_CONF_DCE		0x00000010
+#define TX39_CONF_IRSIZE_SHIFT	2
+#define TX39_CONF_IRSIZE_MASK	0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT	0
+#define TX39_CONF_DRSIZE_MASK	0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM			0x0000ff00
+#define  STATUSB_IP0		8
+#define  STATUSF_IP0		(_ULCAST_(1) <<  8)
+#define  STATUSB_IP1		9
+#define  STATUSF_IP1		(_ULCAST_(1) <<  9)
+#define  STATUSB_IP2		10
+#define  STATUSF_IP2		(_ULCAST_(1) << 10)
+#define  STATUSB_IP3		11
+#define  STATUSF_IP3		(_ULCAST_(1) << 11)
+#define  STATUSB_IP4		12
+#define  STATUSF_IP4		(_ULCAST_(1) << 12)
+#define  STATUSB_IP5		13
+#define  STATUSF_IP5		(_ULCAST_(1) << 13)
+#define  STATUSB_IP6		14
+#define  STATUSF_IP6		(_ULCAST_(1) << 14)
+#define  STATUSB_IP7		15
+#define  STATUSF_IP7		(_ULCAST_(1) << 15)
+#define  STATUSB_IP8		0
+#define  STATUSF_IP8		(_ULCAST_(1) <<  0)
+#define  STATUSB_IP9		1
+#define  STATUSF_IP9		(_ULCAST_(1) <<  1)
+#define  STATUSB_IP10		2
+#define  STATUSF_IP10		(_ULCAST_(1) <<  2)
+#define  STATUSB_IP11		3
+#define  STATUSF_IP11		(_ULCAST_(1) <<  3)
+#define  STATUSB_IP12		4
+#define  STATUSF_IP12		(_ULCAST_(1) <<  4)
+#define  STATUSB_IP13		5
+#define  STATUSF_IP13		(_ULCAST_(1) <<  5)
+#define  STATUSB_IP14		6
+#define  STATUSF_IP14		(_ULCAST_(1) <<  6)
+#define  STATUSB_IP15		7
+#define  STATUSF_IP15		(_ULCAST_(1) <<  7)
+#define ST0_CH			0x00040000
+#define ST0_SR			0x00100000
+#define ST0_TS			0x00200000
+#define ST0_BEV			0x00400000
+#define ST0_RE			0x02000000
+#define ST0_FR			0x04000000
+#define ST0_CU			0xf0000000
+#define ST0_CU0			0x10000000
+#define ST0_CU1			0x20000000
+#define ST0_CU2			0x40000000
+#define ST0_CU3			0x80000000
+#define ST0_XX			0x80000000	/* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define  CAUSEB_EXCCODE		2
+#define  CAUSEF_EXCCODE		(_ULCAST_(31)  <<  2)
+#define  CAUSEB_IP		8
+#define  CAUSEF_IP		(_ULCAST_(255) <<  8)
+#define  CAUSEB_IP0		8
+#define  CAUSEF_IP0		(_ULCAST_(1)   <<  8)
+#define  CAUSEB_IP1		9
+#define  CAUSEF_IP1		(_ULCAST_(1)   <<  9)
+#define  CAUSEB_IP2		10
+#define  CAUSEF_IP2		(_ULCAST_(1)   << 10)
+#define  CAUSEB_IP3		11
+#define  CAUSEF_IP3		(_ULCAST_(1)   << 11)
+#define  CAUSEB_IP4		12
+#define  CAUSEF_IP4		(_ULCAST_(1)   << 12)
+#define  CAUSEB_IP5		13
+#define  CAUSEF_IP5		(_ULCAST_(1)   << 13)
+#define  CAUSEB_IP6		14
+#define  CAUSEF_IP6		(_ULCAST_(1)   << 14)
+#define  CAUSEB_IP7		15
+#define  CAUSEF_IP7		(_ULCAST_(1)   << 15)
+#define  CAUSEB_IV		23
+#define  CAUSEF_IV		(_ULCAST_(1)   << 23)
+#define  CAUSEB_CE		28
+#define  CAUSEF_CE		(_ULCAST_(3)   << 28)
+#define  CAUSEB_BD		31
+#define  CAUSEF_BD		(_ULCAST_(1)   << 31)
+
+/*
+ * Bits in the coprocessor 0 config register.
+ */
+/* Generic bits.  */
+#define CONF_CM_CACHABLE_NO_WA		0
+#define CONF_CM_CACHABLE_WA		1
+#define CONF_CM_UNCACHED		2
+#define CONF_CM_CACHABLE_NONCOHERENT	3
+#define CONF_CM_CACHABLE_CE		4
+#define CONF_CM_CACHABLE_COW		5
+#define CONF_CM_CACHABLE_CUW		6
+#define CONF_CM_CACHABLE_ACCELERATED	7
+#define CONF_CM_CMASK			7
+#define CONF_BE			(_ULCAST_(1) << 15)
+
+/* Bits common to various processors.  */
+#define CONF_CU			(_ULCAST_(1) <<  3)
+#define CONF_DB			(_ULCAST_(1) <<  4)
+#define CONF_IB			(_ULCAST_(1) <<  5)
+#define CONF_DC			(_ULCAST_(7) <<  6)
+#define CONF_IC			(_ULCAST_(7) <<  9)
+#define CONF_EB			(_ULCAST_(1) << 13)
+#define CONF_EM			(_ULCAST_(1) << 14)
+#define CONF_SM			(_ULCAST_(1) << 16)
+#define CONF_SC			(_ULCAST_(1) << 17)
+#define CONF_EW			(_ULCAST_(3) << 18)
+#define CONF_EP			(_ULCAST_(15)<< 24)
+#define CONF_EC			(_ULCAST_(7) << 28)
+#define CONF_CM			(_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0.  */
+#define R4K_CONF_SW		(_ULCAST_(1) << 20)
+#define R4K_CONF_SS		(_ULCAST_(1) << 21)
+#define R4K_CONF_SB		(_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000.  */
+#define R5K_CONF_SE		(_ULCAST_(1) << 12)
+#define R5K_CONF_SS		(_ULCAST_(3) << 20)
+
+/* Bits specific to the R10000.  */
+#define R10K_CONF_DN		(_ULCAST_(3) <<  3)
+#define R10K_CONF_CT		(_ULCAST_(1) <<  5)
+#define R10K_CONF_PE		(_ULCAST_(1) <<  6)
+#define R10K_CONF_PM		(_ULCAST_(3) <<  7)
+#define R10K_CONF_EC		(_ULCAST_(15)<<  9)
+#define R10K_CONF_SB		(_ULCAST_(1) << 13)
+#define R10K_CONF_SK		(_ULCAST_(1) << 14)
+#define R10K_CONF_SS		(_ULCAST_(7) << 16)
+#define R10K_CONF_SC		(_ULCAST_(7) << 19)
+#define R10K_CONF_DC		(_ULCAST_(7) << 26)
+#define R10K_CONF_IC		(_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx.  */
+#define VR41_CONF_CS		(_ULCAST_(1) << 12)
+#define VR41_CONF_M16		(_ULCAST_(1) << 20)
+#define VR41_CONF_AD		(_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx.  */
+#define R30XX_CONF_FDM		(_ULCAST_(1) << 19)
+#define R30XX_CONF_REV		(_ULCAST_(1) << 22)
+#define R30XX_CONF_AC		(_ULCAST_(1) << 23)
+#define R30XX_CONF_RF		(_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT		(_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT	(_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR		(_ULCAST_(1) << 29)
+#define R30XX_CONF_SB		(_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK		(_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49.  */
+#define TX49_CONF_DC		(_ULCAST_(1) << 16)
+#define TX49_CONF_IC		(_ULCAST_(1) << 17)  /* conflict with CONF_SC */
+#define TX49_CONF_HALT		(_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON		(_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA.  */
+#define MIPS_CONF_MT		(_ULCAST_(7) <<  7)
+#define MIPS_CONF_AR		(_ULCAST_(7) << 10)
+#define MIPS_CONF_AT		(_ULCAST_(3) << 13)
+#define MIPS_CONF_M		(_ULCAST_(1) << 31)
+
+/*
+ * R10000 performance counter definitions.
+ *
+ * FIXME: The R10000 performance counter opens a nice way to implement CPU
+ *        time accounting with a precission of one cycle.  I don't have
+ *        R10000 silicon but just a manual, so ...
+ */
+
+/*
+ * Events counted by counter #0
+ */
+#define CE0_CYCLES			0
+#define CE0_INSN_ISSUED			1
+#define CE0_LPSC_ISSUED			2
+#define CE0_S_ISSUED			3
+#define CE0_SC_ISSUED			4
+#define CE0_SC_FAILED			5
+#define CE0_BRANCH_DECODED		6
+#define CE0_QW_WB_SECONDARY		7
+#define CE0_CORRECTED_ECC_ERRORS	8
+#define CE0_ICACHE_MISSES		9
+#define CE0_SCACHE_I_MISSES		10
+#define CE0_SCACHE_I_WAY_MISSPREDICTED	11
+#define CE0_EXT_INTERVENTIONS_REQ	12
+#define CE0_EXT_INVALIDATE_REQ		13
+#define CE0_VIRTUAL_COHERENCY_COND	14
+#define CE0_INSN_GRADUATED		15
+
+/*
+ * Events counted by counter #1
+ */
+#define CE1_CYCLES			0
+#define CE1_INSN_GRADUATED		1
+#define CE1_LPSC_GRADUATED		2
+#define CE1_S_GRADUATED			3
+#define CE1_SC_GRADUATED		4
+#define CE1_FP_INSN_GRADUATED		5
+#define CE1_QW_WB_PRIMARY		6
+#define CE1_TLB_REFILL			7
+#define CE1_BRANCH_MISSPREDICTED	8
+#define CE1_DCACHE_MISS			9
+#define CE1_SCACHE_D_MISSES		10
+#define CE1_SCACHE_D_WAY_MISSPREDICTED	11
+#define CE1_EXT_INTERVENTION_HITS	12
+#define CE1_EXT_INVALIDATE_REQ		13
+#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS	14
+#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS	15
+
+/*
+ * These flags define in which privilege mode the counters count events
+ */
+#define CEB_USER	8	/* Count events in user mode, EXL = ERL = 0 */
+#define CEB_SUPERVISOR	4	/* Count events in supvervisor mode EXL = ERL = 0 */
+#define CEB_KERNEL	2	/* Count events in kernel mode EXL = ERL = 0 */
+#define CEB_EXL		1	/* Count events with EXL = 1, ERL = 0 */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters.  These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfpc\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntr(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtpc\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+#define read_r10k_perf_event(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfps\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntl(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtps\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel)				\
+({ int __res;								\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mfc0\t%0, " #source "\n\t"			\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0\n\t"				\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __read_64bit_c0_register(source, sel)				\
+({ unsigned long long __res;						\
+	if (sizeof(unsigned long) == 4)					\
+		__res = __read_64bit_c0_split(source, sel);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmfc0\t%0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __write_32bit_c0_register(register, sel, value)			\
+do {									\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mtc0\t%z0, " #register "\n\t"			\
+			: : "Jr" ((unsigned int)value));		\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" ((unsigned int)value));		\
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_64bit_c0_split(register, sel, value);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmtc0\t%z0, " #register "\n\t"			\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel)				\
+	((sizeof(unsigned long) == 4) ?					\
+	(unsigned long) __read_32bit_c0_register(reg, sel) :		\
+	(unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_32bit_c0_register(reg, sel, val);		\
+	else								\
+		__write_64bit_c0_register(reg, sel, val);		\
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source)				\
+({ int __res;								\
+	__asm__ __volatile__(						\
+		"cfc0\t%0, " #source "\n\t"				\
+		: "=r" (__res));					\
+	__res;								\
+})
+
+#define __write_32bit_c0_ctrl_register(register, value)			\
+do {									\
+	__asm__ __volatile__(						\
+		"ctc0\t%z0, " #register "\n\t"				\
+		: : "Jr" ((unsigned int)value));			\
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel.  That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel)				\
+({									\
+	unsigned long long val;						\
+	unsigned long flags;						\
+									\
+	local_irq_save(flags);						\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source "\n\t"			\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (val));					\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (val));					\
+	local_irq_restore(flags);					\
+									\
+	val;								\
+})
+
+#define __write_64bit_c0_split(source, sel, val)			\
+do {									\
+	unsigned long flags;						\
+									\
+	local_irq_save(flags);						\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	local_irq_restore(flags);					\
+} while (0)
+
+#define read_c0_index()		__read_32bit_c0_register($0, 0)
+#define write_c0_index(val)	__write_32bit_c0_register($0, 0, val)
+
+#define read_c0_entrylo0()	__read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val)	__write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1()	__read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val)	__write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf()		__read_32bit_c0_register($3, 0)
+#define write_c0_conf(val)	__write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context()	__read_ulong_c0_register($4, 0)
+#define write_c0_context(val)	__write_ulong_c0_register($4, 0, val)
+
+#define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired()		__read_32bit_c0_register($6, 0)
+#define write_c0_wired(val)	__write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info()		__read_32bit_c0_register($7, 0)
+
+#define read_c0_cache()		__read_32bit_c0_register($7, 0)	/* TX39xx */
+#define write_c0_cache(val)	__write_32bit_c0_register($7, 0, val)
+
+#define read_c0_count()		__read_32bit_c0_register($9, 0)
+#define write_c0_count(val)	__write_32bit_c0_register($9, 0, val)
+
+#define read_c0_entryhi()	__read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val)	__write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare()	__read_32bit_c0_register($11, 0)
+#define write_c0_compare(val)	__write_32bit_c0_register($11, 0, val)
+
+#define read_c0_status()	__read_32bit_c0_register($12, 0)
+#define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
+
+#define read_c0_cause()		__read_32bit_c0_register($13, 0)
+#define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc()		__read_ulong_c0_register($14, 0)
+#define write_c0_epc(val)	__write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid()		__read_32bit_c0_register($15, 0)
+
+#define read_c0_config()	__read_32bit_c0_register($16, 0)
+#define read_c0_config1()	__read_32bit_c0_register($16, 1)
+#define read_c0_config2()	__read_32bit_c0_register($16, 2)
+#define read_c0_config3()	__read_32bit_c0_register($16, 3)
+#define write_c0_config(val)	__write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val)	__write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val)	__write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val)	__write_32bit_c0_register($16, 3, val)
+
+/*
+ * The WatchLo register.  There may be upto 8 of them.
+ */
+#define read_c0_watchlo0()	__read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1()	__read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2()	__read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3()	__read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4()	__read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5()	__read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6()	__read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7()	__read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val)	__write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val)	__write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val)	__write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val)	__write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val)	__write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val)	__write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val)	__write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val)	__write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register.  There may be upto 8 of them.
+ */
+#define read_c0_watchhi0()	__read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1()	__read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2()	__read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3()	__read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4()	__read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5()	__read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6()	__read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7()	__read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val)	__write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val)	__write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val)	__write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val)	__write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val)	__write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val)	__write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val)	__write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val)	__write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext()	__read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val)	__write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol()	__read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask()	__read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val)	__write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol()	__read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag()		__read_32bit_c0_register($22, 0)
+#define write_c0_diag(val)	__write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1()		__read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val)	__write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2()		__read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val)	__write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3()		__read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val)	__write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4()		__read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val)	__write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5()		__read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val)	__write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug()		__read_32bit_c0_register($23, 0)
+#define write_c0_debug(val)	__write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc()		__read_ulong_c0_register($24, 0)
+#define write_c0_depc(val)	__write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0()	__read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount()	__read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val)	__write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc()		__read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0()	__read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val)	__write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr()	__read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1()	__read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val)	__write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo()		__read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val)	__write_32bit_c0_register($28, 0, val)
+
+#define read_c0_taghi()		__read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val)	__write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc()	__read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val)	__write_ulong_c0_register($30, 0, val)
+
+/*
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source)                         \
+({ int __res;                                                   \
+	__asm__ __volatile__(                                   \
+	".set\tpush\n\t"					\
+	".set\treorder\n\t"					\
+        "cfc1\t%0,"STR(source)"\n\t"                            \
+	".set\tpop"						\
+        : "=r" (__res));                                        \
+        __res;})
+
+/*
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbp\n\t"
+		".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbr\n\t"
+		".set reorder");
+}
+
+static inline void tlb_write_indexed(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwi\n\t"
+		".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwr\n\t"
+		".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MIPSREGS_H */
diff --git a/include/asm-mips/mman.h b/include/asm-mips/mman.h
new file mode 100644
index 000000000000..62060957ba93
--- /dev/null
+++ b/include/asm-mips/mman.h
@@ -0,0 +1,73 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together.  The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ.  The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+#define PROT_NONE	0x00		/* page can not be accessed */
+#define PROT_READ	0x01		/* page can be read */
+#define PROT_WRITE	0x02		/* page can be written */
+#define PROT_EXEC	0x04		/* page can be executed */
+/*			0x08		   reserved for PROT_EXEC_NOFLUSH */
+#define PROT_SEM	0x10		/* page may be used for atomic ops */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED	0x001		/* Share changes */
+#define MAP_PRIVATE	0x002		/* Changes are private */
+#define MAP_TYPE	0x00f		/* Mask for type of mapping */
+#define MAP_FIXED	0x010		/* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME	0x020		/* Assign page to file */
+#define MAP_AUTOGROW	0x040		/* File may grow by writing */
+#define MAP_LOCAL	0x080		/* Copy on fork/sproc */
+#define MAP_AUTORSRV	0x100		/* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE	0x0400		/* don't check for reservations */
+#define MAP_ANONYMOUS	0x0800		/* don't use a file */
+#define MAP_GROWSDOWN	0x1000		/* stack-like segment */
+#define MAP_DENYWRITE	0x2000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x4000		/* mark it as an executable */
+#define MAP_LOCKED	0x8000		/* pages are locked */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC	0x0001		/* sync memory asynchronously */
+#define MS_INVALIDATE	0x0002		/* invalidate mappings & caches */
+#define MS_SYNC		0x0004		/* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON       MAP_ANONYMOUS
+#define MAP_FILE       0
+
+#endif /* _ASM_MMAN_H */
diff --git a/include/asm-mips/mmu.h b/include/asm-mips/mmu.h
new file mode 100644
index 000000000000..4063edd79623
--- /dev/null
+++ b/include/asm-mips/mmu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif /* __ASM_MMU_H */
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
new file mode 100644
index 000000000000..48b77c9fb4f2
--- /dev/null
+++ b/include/asm-mips/mmu_context.h
@@ -0,0 +1,196 @@
+/*
+ * Switch a MMU context.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long pgd_current[];
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
+	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
+
+#ifdef CONFIG_MIPS32
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 23);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) &pgd_current[smp_processor_id()] << 23); \
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 23);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define ASID_INC	0x40
+#define ASID_MASK	0xfc0
+
+#elif defined(CONFIG_CPU_R8000)
+
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xfff
+
+#else /* FIXME: not correct for R6000 */
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xff
+
+#endif
+
+#define cpu_context(cpu, mm)	((mm)->context[cpu])
+#define cpu_asid(cpu, mm)	(cpu_context((cpu), (mm)) & ASID_MASK)
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ *  All unused by hardware upper bits will be considered
+ *  as a software asid extension.
+ */
+#define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
+#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+
+static inline void
+get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	if (! ((asid += ASID_INC) & ASID_MASK) ) {
+		if (cpu_has_vtag_icache)
+			flush_icache_all();
+		local_flush_tlb_all();	/* start new asid cycle */
+		if (!asid)		/* fix version if needed */
+			asid = ASID_FIRST_VERSION;
+	}
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for (i = 0; i < num_online_cpus(); i++)
+		cpu_context(i, mm) = 0;
+
+	return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* Check if our ASID is of an older version and thus invalid */
+	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
+		get_new_mmu_context(next, cpu);
+
+	write_c0_entryhi(cpu_context(cpu, next));
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/*
+	 * Mark current->active_mm as not "active" anymore.
+	 * We don't want to mislead possible IPI tlb flush routines.
+	 */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+	unsigned int cpu = smp_processor_id();
+
+	local_irq_save(flags);
+
+	/* Unconditionally get a new ASID.  */
+	get_new_mmu_context(next, cpu);
+
+	write_c0_entryhi(cpu_context(cpu, next));
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/* mark mmu ownership change */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it.  Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm, unsigned cpu)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (cpu_isset(cpu, mm->cpu_vm_mask))  {
+		get_new_mmu_context(mm, cpu);
+		write_c0_entryhi(cpu_asid(cpu, mm));
+	} else {
+		/* will get a new context next time */
+		cpu_context(cpu, mm) = 0;
+	}
+
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/include/asm-mips/mmzone.h b/include/asm-mips/mmzone.h
new file mode 100644
index 000000000000..29ee13be0b2a
--- /dev/null
+++ b/include/asm-mips/mmzone.h
@@ -0,0 +1,39 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/page.h>
+#include <mmzone.h>
+
+#define kvaddr_to_nid(kvaddr)	pa_to_nid(__pa(kvaddr))
+#define pfn_to_nid(pfn)		pa_to_nid((pfn) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)						\
+({								\
+ 	unsigned long __pfn = (pfn);				\
+ 	int __n = pfn_to_nid(__pfn);				\
+	((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn +	\
+		       NODE_DATA(__n)->node_spanned_pages) : 0);\
+})
+
+#define pfn_to_page(pfn)					\
+({								\
+ 	unsigned long __pfn = (pfn);				\
+	pg_data_t *__pg = NODE_DATA(pfn_to_nid(__pfn));		\
+	__pg->node_mem_map + (__pfn - __pg->node_start_pfn);	\
+})
+
+#define page_to_pfn(p)						\
+({								\
+	struct page *__p = (p);					\
+	struct zone *__z = page_zone(__p);			\
+	((__p - __z->zone_mem_map) + __z->zone_start_pfn);	\
+})
+
+/* XXX: FIXME -- wli */
+#define kern_addr_valid(addr)	(0)
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h
new file mode 100644
index 000000000000..90ee24aad955
--- /dev/null
+++ b/include/asm-mips/module.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+	/* Data Bus Error exception tables */
+	struct list_head dbe_list;
+	const struct exception_table_entry *dbe_start;
+	const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+
+typedef struct
+{
+  Elf64_Addr r_offset;			/* Address of relocation.  */
+  Elf64_Word r_sym;			/* Symbol index.  */
+  Elf64_Byte r_ssym;			/* Special symbol.  */
+  Elf64_Byte r_type3;			/* Third relocation.  */
+  Elf64_Byte r_type2;			/* Second relocation.  */
+  Elf64_Byte r_type;			/* First relocation.  */
+  Elf64_Sxword r_addend;		/* Addend.  */
+} Elf64_Mips_Rela;
+
+#ifdef CONFIG_MIPS32
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+#endif
+
+#ifdef CONFIG_MIPS64
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+
+#endif
+
+#ifdef CONFIG_MODULES
+/* Given an address, look for it in the exception tables. */
+const struct exception_table_entry*search_module_dbetables(unsigned long addr);
+#else
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+#endif
+
+#endif /* _ASM_MODULE_H */
diff --git a/include/asm-mips/msc01_ic.h b/include/asm-mips/msc01_ic.h
new file mode 100644
index 000000000000..64f17208d602
--- /dev/null
+++ b/include/asm-mips/msc01_ic.h
@@ -0,0 +1,151 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2004 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H
+#define __ASM_MIPS_BOARDS_MSC01_IC_H
+
+/*****************************************************************************
+ * Register offset addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST_OFS     0x00008    /* Software reset              */
+#define MSC01_IC_ENAL_OFS    0x00100    /* Int_in enable mask 31:0     */
+#define MSC01_IC_ENAH_OFS    0x00108    /* Int_in enable mask 63:32    */
+#define MSC01_IC_DISL_OFS    0x00120    /* Int_in disable mask 31:0    */
+#define MSC01_IC_DISH_OFS    0x00128    /* Int_in disable mask 63:32   */
+#define MSC01_IC_ISBL_OFS    0x00140    /* Raw int_in 31:0             */
+#define MSC01_IC_ISBH_OFS    0x00148    /* Raw int_in 63:32            */
+#define MSC01_IC_ISAL_OFS    0x00160    /* Masked int_in 31:0          */
+#define MSC01_IC_ISAH_OFS    0x00168    /* Masked int_in 63:32         */
+#define MSC01_IC_LVL_OFS     0x00180    /* Disable priority int_out    */
+#define MSC01_IC_RAMW_OFS    0x00180    /* Shadow set RAM (EI)	       */
+#define MSC01_IC_OSB_OFS     0x00188    /* Raw int_out                 */
+#define MSC01_IC_OSA_OFS     0x00190    /* Masked int_out              */
+#define MSC01_IC_GENA_OFS    0x00198    /* Global HW int enable        */
+#define MSC01_IC_BASE_OFS    0x001a0    /* Base address of IC_VEC      */
+#define MSC01_IC_VEC_OFS     0x001b0    /* Active int's vector address */
+#define MSC01_IC_EOI_OFS     0x001c0    /* Enable lower level ints     */
+#define MSC01_IC_CFG_OFS     0x001c8    /* Configuration register      */
+#define MSC01_IC_TRLD_OFS    0x001d0    /* Interval timer reload val   */
+#define MSC01_IC_TVAL_OFS    0x001e0    /* Interval timer current val  */
+#define MSC01_IC_TCFG_OFS    0x001f0    /* Interval timer config       */
+#define MSC01_IC_SUP_OFS     0x00200    /* Set up int_in line 0        */
+#define MSC01_IC_ENA_OFS     0x00800    /* Int_in enable mask 63:0     */
+#define MSC01_IC_DIS_OFS     0x00820    /* Int_in disable mask 63:0    */
+#define MSC01_IC_ISB_OFS     0x00840    /* Raw int_in 63:0             */
+#define MSC01_IC_ISA_OFS     0x00860    /* Masked int_in 63:0          */
+
+/*****************************************************************************
+ * Register field encodings
+ *****************************************************************************/
+
+#define MSC01_IC_RST_RST_SHF      0
+#define MSC01_IC_RST_RST_MSK      0x00000001
+#define MSC01_IC_RST_RST_BIT      MSC01_IC_RST_RST_MSK
+#define MSC01_IC_LVL_LVL_SHF      0
+#define MSC01_IC_LVL_LVL_MSK      0x000000ff
+#define MSC01_IC_LVL_SPUR_SHF     16
+#define MSC01_IC_LVL_SPUR_MSK     0x00010000
+#define MSC01_IC_LVL_SPUR_BIT     MSC01_IC_LVL_SPUR_MSK
+#define MSC01_IC_RAMW_RIPL_SHF	  0
+#define MSC01_IC_RAMW_RIPL_MSK	  0x0000003f
+#define MSC01_IC_RAMW_DATA_SHF	  6
+#define MSC01_IC_RAMW_DATA_MSK	  0x00000fc0
+#define MSC01_IC_RAMW_ADDR_SHF	  25
+#define MSC01_IC_RAMW_ADDR_MSK	  0x7e000000
+#define MSC01_IC_RAMW_READ_SHF	  31
+#define MSC01_IC_RAMW_READ_MSK	  0x80000000
+#define MSC01_IC_RAMW_READ_BIT	  MSC01_IC_RAMW_READ_MSK
+#define MSC01_IC_OSB_OSB_SHF      0
+#define MSC01_IC_OSB_OSB_MSK      0x000000ff
+#define MSC01_IC_OSA_OSA_SHF      0
+#define MSC01_IC_OSA_OSA_MSK      0x000000ff
+#define MSC01_IC_GENA_GENA_SHF    0
+#define MSC01_IC_GENA_GENA_MSK    0x00000001
+#define MSC01_IC_GENA_GENA_BIT    MSC01_IC_GENA_GENA_MSK
+#define MSC01_IC_CFG_DIS_SHF      0
+#define MSC01_IC_CFG_DIS_MSK      0x00000001
+#define MSC01_IC_CFG_DIS_BIT      MSC01_IC_CFG_DIS_MSK
+#define MSC01_IC_CFG_SHFT_SHF     8
+#define MSC01_IC_CFG_SHFT_MSK     0x00000f00
+#define MSC01_IC_TCFG_ENA_SHF     0
+#define MSC01_IC_TCFG_ENA_MSK     0x00000001
+#define MSC01_IC_TCFG_ENA_BIT     MSC01_IC_TCFG_ENA_MSK
+#define MSC01_IC_TCFG_INT_SHF     8
+#define MSC01_IC_TCFG_INT_MSK     0x00000100
+#define MSC01_IC_TCFG_INT_BIT     MSC01_IC_TCFG_INT_MSK
+#define MSC01_IC_TCFG_EDGE_SHF    16
+#define MSC01_IC_TCFG_EDGE_MSK    0x00010000
+#define MSC01_IC_TCFG_EDGE_BIT    MSC01_IC_TCFG_EDGE_MSK
+#define MSC01_IC_SUP_PRI_SHF      0
+#define MSC01_IC_SUP_PRI_MSK      0x00000007
+#define MSC01_IC_SUP_EDGE_SHF     8
+#define MSC01_IC_SUP_EDGE_MSK     0x00000100
+#define MSC01_IC_SUP_EDGE_BIT     MSC01_IC_SUP_EDGE_MSK
+#define MSC01_IC_SUP_STEP         8
+
+/*
+ * MIPS System controller interrupt register base.
+ *
+ * FIXME - are these macros specific to Malta and co or to the MSC?  If the
+ * latter, they should be moved elsewhere.
+ */
+#define MIPS_MSC01_IC_REG_BASE	0x1bc40000
+
+/*****************************************************************************
+ * Absolute register addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST     (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
+#define MSC01_IC_ENAL    (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
+#define MSC01_IC_ENAH    (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
+#define MSC01_IC_DISL    (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
+#define MSC01_IC_DISH    (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
+#define MSC01_IC_ISBL    (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
+#define MSC01_IC_ISBH    (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
+#define MSC01_IC_ISAL    (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
+#define MSC01_IC_ISAH    (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
+#define MSC01_IC_LVL     (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
+#define MSC01_IC_RAMW    (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
+#define MSC01_IC_OSB     (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
+#define MSC01_IC_OSA     (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
+#define MSC01_IC_GENA    (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
+#define MSC01_IC_BASE    (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
+#define MSC01_IC_VEC     (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
+#define MSC01_IC_EOI     (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
+#define MSC01_IC_CFG     (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
+#define MSC01_IC_TRLD    (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
+#define MSC01_IC_TVAL    (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
+#define MSC01_IC_TCFG    (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
+#define MSC01_IC_SUP     (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
+#define MSC01_IC_ENA     (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
+#define MSC01_IC_DIS     (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
+#define MSC01_IC_ISB     (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
+#define MSC01_IC_ISA     (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
+
+/*
+ * Soc-it interrupts are configurable.
+ * Every board describes its IRQ mapping with this table.
+ */
+typedef struct msc_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_lvl;
+} msc_irqmap_t;
+
+/* im_type */
+#define MSC01_IRQ_LEVEL		0
+#define MSC01_IRQ_EDGE		1
+
+extern void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq);
+extern void ll_msc_irq(struct pt_regs *regs);
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
+
diff --git a/include/asm-mips/msgbuf.h b/include/asm-mips/msgbuf.h
new file mode 100644
index 000000000000..513b2824838b
--- /dev/null
+++ b/include/asm-mips/msgbuf.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+#include <linux/config.h>
+
+/*
+ * The msqid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem
+ * - 2 miscellaneous unsigned long values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h
new file mode 100644
index 000000000000..c94d12d1f868
--- /dev/null
+++ b/include/asm-mips/namei.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_NAMEI_H
+#define _ASM_NAMEI_H
+
+#include <linux/personality.h>
+#include <linux/stddef.h>
+
+#define IRIX_EMUL	"/usr/gnemul/irix/"
+#define RISCOS_EMUL	"/usr/gnemul/riscos/"
+
+static inline char *__emul_prefix(void)
+{
+	switch (current->personality) {
+	case PER_IRIX32:
+	case PER_IRIXN32:
+	case PER_IRIX64:
+		return IRIX_EMUL;
+
+	case PER_RISCOS:
+		return RISCOS_EMUL;
+
+	default:
+		return NULL;
+	}
+}
+
+#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mips/nile4.h b/include/asm-mips/nile4.h
new file mode 100644
index 000000000000..c3ca959aa4d9
--- /dev/null
+++ b/include/asm-mips/nile4.h
@@ -0,0 +1,310 @@
+/*
+ *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ *
+ *  This file is based on the following documentation:
+ *
+ *	NEC Vrc 5074 System Controller Data Sheet, June 1998
+ */
+
+#ifndef _ASM_NILE4_H
+#define _ASM_NILE4_H
+
+#define NILE4_BASE		0xbfa00000
+#define NILE4_SIZE		0x00200000		/* 2 MB */
+
+
+    /*
+     *  Physical Device Address Registers (PDARs)
+     */
+
+#define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
+#define NILE4_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
+#define NILE4_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
+#define NILE4_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
+#define NILE4_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
+#define NILE4_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
+#define NILE4_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
+#define NILE4_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
+#define NILE4_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
+#define NILE4_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
+#define NILE4_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
+#define NILE4_INTCS	0x0070	/* Controller Internal Registers and Devices */
+				/* [R/W] */
+#define NILE4_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
+
+
+    /*
+     *  CPU Interface Registers
+     */
+
+#define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
+#define NILE4_INTCTRL	0x0088	/* Interrupt Control [R/W] */
+#define NILE4_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
+#define NILE4_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
+				/* Enable [R/W] */
+#define NILE4_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
+#define NILE4_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
+
+
+    /*
+     *  Memory-Interface Registers
+     */
+
+#define NILE4_MEMCTRL	0x00C0	/* Memory Control */
+#define NILE4_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
+#define NILE4_CHKERR	0x00D0	/* Memory Check Error Status [R] */
+
+
+    /*
+     *  PCI-Bus Registers
+     */
+
+#define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
+#define NILE4_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
+#define NILE4_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
+#define NILE4_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
+#define NILE4_PCIERR	0x00B8	/* PCI Error [R/W] */
+
+
+    /*
+     *  Local-Bus Registers
+     */
+
+#define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
+#define NILE4_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
+#define NILE4_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
+#define NILE4_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
+#define NILE4_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
+#define NILE4_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
+#define NILE4_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
+#define NILE4_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
+#define NILE4_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
+				/* Enables [R/W] */
+#define NILE4_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
+#define NILE4_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
+
+
+    /*
+     *  DMA Registers
+     */
+
+#define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
+#define NILE4_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
+#define NILE4_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
+#define NILE4_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
+#define NILE4_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
+#define NILE4_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
+
+
+    /*
+     *  Timer Registers
+     */
+
+#define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
+#define NILE4_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
+#define NILE4_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
+#define NILE4_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
+#define NILE4_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
+#define NILE4_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
+#define NILE4_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
+#define NILE4_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
+
+
+    /*
+     *  PCI Configuration Space Registers
+     */
+
+#define NILE4_PCI_BASE	0x0200
+
+#define NILE4_VID	0x0200	/* PCI Vendor ID [R] */
+#define NILE4_DID	0x0202	/* PCI Device ID [R] */
+#define NILE4_PCICMD	0x0204	/* PCI Command [R/W] */
+#define NILE4_PCISTS	0x0206	/* PCI Status [R/W] */
+#define NILE4_REVID	0x0208	/* PCI Revision ID [R] */
+#define NILE4_CLASS	0x0209	/* PCI Class Code [R] */
+#define NILE4_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
+#define NILE4_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
+#define NILE4_HTYPE	0x020E	/* PCI Header Type [R] */
+#define NILE4_BIST	0x020F	/* BIST [R] (unimplemented) */
+#define NILE4_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
+#define NILE4_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
+#define NILE4_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
+#define NILE4_CIS	0x0228	/* PCI Cardbus CIS Pointer [R] */
+				/* (unimplemented) */
+#define NILE4_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
+#define NILE4_SSID	0x022E	/* PCI Sub-System ID [R/W] */
+#define NILE4_ROM	0x0230	/* Expansion ROM Base Address [R] */
+				/* (unimplemented) */
+#define NILE4_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
+#define NILE4_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
+#define NILE4_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
+#define NILE4_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
+#define NILE4_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
+#define NILE4_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
+#define NILE4_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
+#define NILE4_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
+#define NILE4_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
+#define NILE4_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
+#define NILE4_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
+#define NILE4_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
+
+
+    /*
+     *  Serial-Port Registers
+     */
+
+#define NILE4_UART_BASE	0x0300
+
+#define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
+#define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
+#define NILE4_UARTIER	0x0308	/* UART Interrupt Enable [R/W] */
+#define NILE4_UARTDLL	0x0300	/* UART Divisor Latch LSB [R/W] */
+#define NILE4_UARTDLM	0x0308	/* UART Divisor Latch MSB [R/W] */
+#define NILE4_UARTIIR	0x0310	/* UART Interrupt ID [R] */
+#define NILE4_UARTFCR	0x0310	/* UART FIFO Control [W] */
+#define NILE4_UARTLCR	0x0318	/* UART Line Control [R/W] */
+#define NILE4_UARTMCR	0x0320	/* UART Modem Control [R/W] */
+#define NILE4_UARTLSR	0x0328	/* UART Line Status [R/W] */
+#define NILE4_UARTMSR	0x0330	/* UART Modem Status [R/W] */
+#define NILE4_UARTSCR	0x0338	/* UART Scratch [R/W] */
+
+#define NILE4_UART_BASE_BAUD	520833	/* 100 MHz / 12 / 16 */
+
+
+    /*
+     *  Interrupt Lines
+     */
+
+#define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
+#define NILE4_INT_CNTD	1	/* CPU No-Target Decode Interrupt */
+#define NILE4_INT_MCE	2	/* Memory-Check Error Interrupt */
+#define NILE4_INT_DMA	3	/* DMA Controller Interrupt */
+#define NILE4_INT_UART	4	/* UART Interrupt */
+#define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
+#define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
+#define NILE4_INT_LBRTD	7	/* Local-Bus Ready Timer Interrupt */
+#define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
+#define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
+#define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
+#define NILE4_INT_INTD	11	/* PCI Interrupt Signal INTD# */
+#define NILE4_INT_INTE	12	/* PCI Interrupt Signal INTE# (ISA cascade) */
+#define NILE4_INT_RESV	13	/* Reserved */
+#define NILE4_INT_PCIS	14	/* PCI SERR# Interrupt */
+#define NILE4_INT_PCIE	15	/* PCI Internal Error Interrupt */
+
+
+    /*
+     *  Nile 4 Register Access
+     */
+
+static inline void nile4_sync(void)
+{
+    volatile u32 *p = (volatile u32 *)0xbfc00000;
+    (void)(*p);
+}
+
+static inline void nile4_out32(u32 offset, u32 val)
+{
+    *(volatile u32 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u32 nile4_in32(u32 offset)
+{
+    u32 val = *(volatile u32 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out16(u32 offset, u16 val)
+{
+    *(volatile u16 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u16 nile4_in16(u32 offset)
+{
+    u16 val = *(volatile u16 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out8(u32 offset, u8 val)
+{
+    *(volatile u8 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u8 nile4_in8(u32 offset)
+{
+    u8 val = *(volatile u8 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+
+    /*
+     *  Physical Device Address Registers
+     */
+
+extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+			   int on_memory_bus, int visible);
+
+
+    /*
+     *  PCI Master Registers
+     */
+
+#define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
+#define NILE4_PCICMD_IO		1	/* PCI I/O Space */
+#define NILE4_PCICMD_MEM	3	/* PCI Memory Space */
+#define NILE4_PCICMD_CFG	5	/* PCI Configuration Space */
+
+
+    /*
+     *  PCI Address Spaces
+     *
+     *  Note that these are multiplexed using PCIINIT[01]!
+     */
+
+#define NILE4_PCI_IO_BASE	0xa6000000
+#define NILE4_PCI_MEM_BASE	0xa8000000
+#define NILE4_PCI_CFG_BASE	NILE4_PCI_MEM_BASE
+#define NILE4_PCI_IACK_BASE	NILE4_PCI_IO_BASE
+
+
+extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
+
+
+    /*
+     *  Interrupt Programming
+     */
+
+#define NUM_I8259_INTERRUPTS	16
+#define NUM_NILE4_INTERRUPTS	16
+
+#define IRQ_I8259_CASCADE	NILE4_INT_INTE
+#define is_i8259_irq(irq)	((irq) < NUM_I8259_INTERRUPTS)
+#define nile4_to_irq(n)		((n)+NUM_I8259_INTERRUPTS)
+#define irq_to_nile4(n)		((n)-NUM_I8259_INTERRUPTS)
+
+extern void nile4_map_irq(int nile4_irq, int cpu_irq);
+extern void nile4_map_irq_all(int cpu_irq);
+extern void nile4_enable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq_all(void);
+extern u16 nile4_get_irq_stat(int cpu_irq);
+extern void nile4_enable_irq_output(int cpu_irq);
+extern void nile4_disable_irq_output(int cpu_irq);
+extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
+extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
+extern void nile4_clear_irq(int nile4_irq);
+extern void nile4_clear_irq_mask(u32 mask);
+extern u8 nile4_i8259_iack(void);
+extern void nile4_dump_irq_status(void);	/* Debug */
+
+#endif
+
diff --git a/include/asm-mips/numnodes.h b/include/asm-mips/numnodes.h
new file mode 100644
index 000000000000..4f00c16ceeb0
--- /dev/null
+++ b/include/asm-mips/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+/* Max 128 Nodes */
+#define NODES_SHIFT	6
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h
new file mode 100644
index 000000000000..36cec9e31696
--- /dev/null
+++ b/include/asm-mips/paccess.h
@@ -0,0 +1,113 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Protected memory access.  Used for everything that might take revenge
+ * by sending a DBE error like accessing possibly non-existant memory or
+ * devices.
+ */
+#ifndef _ASM_PACCESS_H
+#define _ASM_PACCESS_H
+
+#include <linux/config.h>
+#include <linux/errno.h>
+
+#ifdef CONFIG_MIPS32
+#define __PA_ADDR	".word"
+#endif
+#ifdef CONFIG_MIPS64
+#define __PA_ADDR	".dword"
+#endif
+
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+
+#define put_dbe(x,ptr) __put_dbe((x),(ptr),sizeof(*(ptr)))
+#define get_dbe(x,ptr) __get_dbe((x),(ptr),sizeof(*(ptr)))
+
+struct __large_pstruct { unsigned long buf[100]; };
+#define __mp(x) (*(struct __large_pstruct *)(x))
+
+#define __get_dbe(x,ptr,size)						\
+({									\
+	long __gu_err;							\
+	__typeof(*(ptr)) __gu_val;					\
+	unsigned long __gu_addr;					\
+	__asm__("":"=r" (__gu_val));					\
+	__gu_addr = (unsigned long) (ptr);				\
+	__asm__("":"=r" (__gu_err));					\
+	switch (size) {							\
+	case 1: __get_dbe_asm("lb"); break;				\
+	case 2: __get_dbe_asm("lh"); break;				\
+	case 4: __get_dbe_asm("lw"); break;				\
+	case 8:  __get_dbe_asm("ld"); break;				\
+	default: __get_dbe_unknown(); break;				\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_dbe_asm(insn)						\
+({									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"move\t%1,$0\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	:"=r" (__gu_err), "=r" (__gu_val)				\
+	:"o" (__mp(__gu_addr)), "i" (-EFAULT));				\
+})
+
+extern void __get_dbe_unknown(void);
+
+#define __put_dbe(x,ptr,size)						\
+({									\
+	long __pu_err;							\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_addr;							\
+	__pu_val = (x);							\
+	__pu_addr = (long) (ptr);					\
+	__asm__("":"=r" (__pu_err));					\
+	switch (size) {							\
+	case 1: __put_dbe_asm("sb"); break;				\
+	case 2: __put_dbe_asm("sh"); break;				\
+	case 4: __put_dbe_asm("sw"); break;				\
+	case 8: __put_dbe_asm("sd"); break;				\
+	default: __put_dbe_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_dbe_asm(insn)						\
+({									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	: "=r" (__pu_err)						\
+	: "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT));	\
+})
+
+extern void __put_dbe_unknown(void);
+
+extern unsigned long search_dbe_table(unsigned long addr);
+
+#endif /* _ASM_PACCESS_H */
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
new file mode 100644
index 000000000000..d1bf8240e73b
--- /dev/null
+++ b/include/asm-mips/page.h
@@ -0,0 +1,151 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+
+#include <spaces.h>
+
+#endif
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PAGE_SHIFT	12
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PAGE_SHIFT	13
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PAGE_SHIFT	14
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PAGE_SHIFT	16
+#endif
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
+
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern void clear_page(void * page);
+extern void copy_page(void * to, void * from);
+
+extern unsigned long shm_align_mask;
+
+static inline unsigned long pages_do_alias(unsigned long addr1,
+	unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
+struct page;
+
+static inline void clear_user_page(void *addr, unsigned long vaddr,
+	struct page *page)
+{
+	extern void (*flush_data_cache_page)(unsigned long addr);
+
+	clear_page(addr);
+	if (pages_do_alias((unsigned long) addr, vaddr))
+		flush_data_cache_page((unsigned long)addr);
+}
+
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+	struct page *to)
+{
+	extern void (*flush_data_cache_page)(unsigned long addr);
+
+	copy_page(vto, vfrom);
+	if (pages_do_alias((unsigned long)vto, vaddr))
+		flush_data_cache_page((unsigned long)vto);
+}
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+  #ifdef CONFIG_CPU_MIPS32
+    typedef struct { unsigned long pte_low, pte_high; } pte_t;
+    #define pte_val(x)    ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+  #else
+     typedef struct { unsigned long long pte; } pte_t;
+     #define pte_val(x)	((x).pte)
+  #endif
+#else
+typedef struct { unsigned long pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#endif
+
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define ptep_buddy(x)	((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
+
+#endif /* defined (__KERNEL__) */
+
+#ifdef CONFIG_LIMITED_DMA
+#define WANT_PAGE_VIRTUAL
+#endif
+
+#endif /* _ASM_PAGE_H */
diff --git a/include/asm-mips/param.h b/include/asm-mips/param.h
new file mode 100644
index 000000000000..2bead8273ced
--- /dev/null
+++ b/include/asm-mips/param.h
@@ -0,0 +1,31 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+
+# include <param.h>			/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
diff --git a/include/asm-mips/parport.h b/include/asm-mips/parport.h
new file mode 100644
index 000000000000..a742e04e82de
--- /dev/null
+++ b/include/asm-mips/parport.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* _ASM_PARPORT_H */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
new file mode 100644
index 000000000000..c9c576b48556
--- /dev/null
+++ b/include/asm-mips/pci.h
@@ -0,0 +1,160 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+#ifdef __KERNEL__
+
+/*
+ * This file essentially defines the interface between board
+ * specific PCI code and MIPS common PCI code.  Should potentially put
+ * into include/asm/pci.h file.
+ */
+
+#include <linux/ioport.h>
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+	struct pci_controller *next;
+	struct pci_bus *bus;
+
+	struct pci_ops *pci_ops;
+	struct resource *mem_resource;
+	unsigned long mem_offset;
+	struct resource *io_resource;
+	unsigned long io_offset;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	int iommu;
+};
+
+/*
+ * Used by boards to register their PCI busses before the actual scanning.
+ */
+extern struct pci_controller * alloc_pci_controller(void);
+extern void register_pci_controller(struct pci_controller *hose);
+
+/*
+ * board supplied pci irq fixup routine
+ */
+extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long PCIBIOS_MIN_IO;
+extern unsigned long PCIBIOS_MIN_MEM;
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * Dynamic DMA mapping stuff.
+ * MIPS has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/*
+ * The PCI address space does equal the physical memory address space.  The
+ * networking and block device layers use this boolean for bounce buffer
+ * decisions.  This is set if any hose does not have an IOMMU.
+ */
+extern unsigned int PCI_DMA_BUS_IS_PHYS;
+
+#ifdef CONFIG_MAPPED_DMA_IO
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* CONFIG_MAPPED_DMA_IO  */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_MAPPED_DMA_IO  */
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)	(1)
+
+extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
+	struct page *page, unsigned long offset, int direction);
+extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
+	dma64_addr_t dma_addr);
+extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
+	dma64_addr_t dma_addr);
+extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
+	dma64_addr_t dma_addr, size_t len, int direction);
+extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
+	dma64_addr_t dma_addr, size_t len, int direction);
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+	struct pci_bus_region *region, struct resource *res);
+
+#ifdef CONFIG_PCI_DOMAINS
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+#endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/pci/bridge.h b/include/asm-mips/pci/bridge.h
new file mode 100644
index 000000000000..b4ee995c56e6
--- /dev/null
+++ b/include/asm-mips/pci/bridge.h
@@ -0,0 +1,851 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * bridge.h - bridge chip header file, derived from IRIX <sys/PCI/bridge.h>,
+ * revision 1.76.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/xtalk/xwidget.h>		/* generic widget header */
+
+/* I/O page size */
+
+#define IOPFNSHIFT		12	/* 4K per mapped page */
+
+#define IOPGSIZE		(1 << IOPFNSHIFT)
+#define IOPG(x)			((x) >> IOPFNSHIFT)
+#define IOPGOFF(x)		((x) & (IOPGSIZE-1))
+
+/* Bridge RAM sizes */
+
+#define BRIDGE_ATE_RAM_SIZE	0x00000400	/* 1kB ATE RAM */
+
+#define BRIDGE_CONFIG_BASE	0x20000
+#define BRIDGE_CONFIG1_BASE	0x28000
+#define BRIDGE_CONFIG_END	0x30000
+#define BRIDGE_CONFIG_SLOT_SIZE 0x1000
+
+#define BRIDGE_SSRAM_512K	0x00080000	/* 512kB */
+#define BRIDGE_SSRAM_128K	0x00020000	/* 128kB */
+#define BRIDGE_SSRAM_64K	0x00010000	/* 64kB */
+#define BRIDGE_SSRAM_0K		0x00000000	/* 0kB */
+
+/* ========================================================================
+ *    Bridge address map
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All accesses to bridge hardware registers must be done
+ * using 32-bit loads and stores.
+ */
+typedef u32	bridgereg_t;
+
+typedef u64	bridge_ate_t;
+
+/* pointers to bridge ATEs
+ * are always "pointer to volatile"
+ */
+typedef volatile bridge_ate_t  *bridge_ate_p;
+
+/*
+ * It is generally preferred that hardware registers on the bridge
+ * are located from C code via this structure.
+ *
+ * Generated from Bridge spec dated 04oct95
+ */
+
+typedef volatile struct bridge_s {
+	/* Local Registers			       0x000000-0x00FFFF */
+
+	/* standard widget configuration	       0x000000-0x000057 */
+	widget_cfg_t	    b_widget;			/* 0x000000 */
+
+	/* helper fieldnames for accessing bridge widget */
+
+#define b_wid_id			b_widget.w_id
+#define b_wid_stat			b_widget.w_status
+#define b_wid_err_upper			b_widget.w_err_upper_addr
+#define b_wid_err_lower			b_widget.w_err_lower_addr
+#define b_wid_control			b_widget.w_control
+#define b_wid_req_timeout		b_widget.w_req_timeout
+#define b_wid_int_upper			b_widget.w_intdest_upper_addr
+#define b_wid_int_lower			b_widget.w_intdest_lower_addr
+#define b_wid_err_cmdword		b_widget.w_err_cmd_word
+#define b_wid_llp			b_widget.w_llp_cfg
+#define b_wid_tflush			b_widget.w_tflush
+
+	/* bridge-specific widget configuration	0x000058-0x00007F */
+	bridgereg_t	    _pad_000058;
+	bridgereg_t	    b_wid_aux_err;		/* 0x00005C */
+	bridgereg_t	    _pad_000060;
+	bridgereg_t	    b_wid_resp_upper;		/* 0x000064 */
+	bridgereg_t	    _pad_000068;
+	bridgereg_t	    b_wid_resp_lower;		/* 0x00006C */
+	bridgereg_t	    _pad_000070;
+	bridgereg_t	    b_wid_tst_pin_ctrl;		/* 0x000074 */
+	bridgereg_t	_pad_000078[2];
+
+	/* PMU & Map 0x000080-0x00008F */
+	bridgereg_t	_pad_000080;
+	bridgereg_t	b_dir_map;			/* 0x000084 */
+	bridgereg_t	_pad_000088[2];
+
+	/* SSRAM 0x000090-0x00009F */
+	bridgereg_t	_pad_000090;
+	bridgereg_t	b_ram_perr;			/* 0x000094 */
+	bridgereg_t	_pad_000098[2];
+
+	/* Arbitration 0x0000A0-0x0000AF */
+	bridgereg_t	_pad_0000A0;
+	bridgereg_t	b_arb;				/* 0x0000A4 */
+	bridgereg_t	_pad_0000A8[2];
+
+	/* Number In A Can 0x0000B0-0x0000BF */
+	bridgereg_t	_pad_0000B0;
+	bridgereg_t	b_nic;				/* 0x0000B4 */
+	bridgereg_t	_pad_0000B8[2];
+
+	/* PCI/GIO 0x0000C0-0x0000FF */
+	bridgereg_t	_pad_0000C0;
+	bridgereg_t	b_bus_timeout;			/* 0x0000C4 */
+#define b_pci_bus_timeout b_bus_timeout
+
+	bridgereg_t	_pad_0000C8;
+	bridgereg_t	b_pci_cfg;			/* 0x0000CC */
+	bridgereg_t	_pad_0000D0;
+	bridgereg_t	b_pci_err_upper;		/* 0x0000D4 */
+	bridgereg_t	_pad_0000D8;
+	bridgereg_t	b_pci_err_lower;		/* 0x0000DC */
+	bridgereg_t	_pad_0000E0[8];
+#define b_gio_err_lower b_pci_err_lower
+#define b_gio_err_upper b_pci_err_upper
+
+	/* Interrupt 0x000100-0x0001FF */
+	bridgereg_t	_pad_000100;
+	bridgereg_t	b_int_status;			/* 0x000104 */
+	bridgereg_t	_pad_000108;
+	bridgereg_t	b_int_enable;			/* 0x00010C */
+	bridgereg_t	_pad_000110;
+	bridgereg_t	b_int_rst_stat;			/* 0x000114 */
+	bridgereg_t	_pad_000118;
+	bridgereg_t	b_int_mode;			/* 0x00011C */
+	bridgereg_t	_pad_000120;
+	bridgereg_t	b_int_device;			/* 0x000124 */
+	bridgereg_t	_pad_000128;
+	bridgereg_t	b_int_host_err;			/* 0x00012C */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0001{30,,,68} */
+		bridgereg_t	addr;			/* 0x0001{34,,,6C} */
+	} b_int_addr[8];				/* 0x000130 */
+
+	bridgereg_t	_pad_000170[36];
+
+	/* Device 0x000200-0x0003FF */
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{00,,,38} */
+		bridgereg_t	reg;			/* 0x0002{04,,,3C} */
+	} b_device[8];					/* 0x000200 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{40,,,78} */
+		bridgereg_t	reg;			/* 0x0002{44,,,7C} */
+	} b_wr_req_buf[8];				/* 0x000240 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{80,,,88} */
+		bridgereg_t	reg;			/* 0x0002{84,,,8C} */
+	} b_rrb_map[2];					/* 0x000280 */
+#define	b_even_resp	b_rrb_map[0].reg		/* 0x000284 */
+#define	b_odd_resp	b_rrb_map[1].reg		/* 0x00028C */
+
+	bridgereg_t	_pad_000290;
+	bridgereg_t	b_resp_status;			/* 0x000294 */
+	bridgereg_t	_pad_000298;
+	bridgereg_t	b_resp_clear;			/* 0x00029C */
+
+	bridgereg_t	_pad_0002A0[24];
+
+	char		_pad_000300[0x10000 - 0x000300];
+
+	/* Internal Address Translation Entry RAM 0x010000-0x0103FF */
+	union {
+		bridge_ate_t	wr;			/* write-only */
+		struct {
+			bridgereg_t	_p_pad;
+			bridgereg_t	rd;		/* read-only */
+		}			hi;
+	}			    b_int_ate_ram[128];
+
+	char	_pad_010400[0x11000 - 0x010400];
+
+	/* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */
+	struct {
+		bridgereg_t	_p_pad;
+		bridgereg_t	rd;		/* read-only */
+	} b_int_ate_ram_lo[128];
+
+	char	_pad_011400[0x20000 - 0x011400];
+
+	/* PCI Device Configuration Spaces 0x020000-0x027FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+		union {
+			u8	c[0x100 / 1];
+			u16	s[0x100 / 2];
+			u32	l[0x100 / 4];
+			u64	d[0x100 / 8];
+		} f[8];
+	} b_type0_cfg_dev[8];					/* 0x020000 */
+
+    /* PCI Type 1 Configuration Space 0x028000-0x028FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+	} b_type1_cfg;					/* 0x028000-0x029000 */
+
+	char	_pad_029000[0x007000];			/* 0x029000-0x030000 */
+
+	/* PCI Interrupt Acknowledge Cycle 0x030000 */
+	union {
+		u8	c[8 / 1];
+		u16	s[8 / 2];
+		u32	l[8 / 4];
+		u64	d[8 / 8];
+	} b_pci_iack;						/* 0x030000 */
+
+	u8	_pad_030007[0x04fff8];			/* 0x030008-0x07FFFF */
+
+	/* External Address Translation Entry RAM 0x080000-0x0FFFFF */
+	bridge_ate_t    b_ext_ate_ram[0x10000];
+
+	/* Reserved 0x100000-0x1FFFFF */
+	char	_pad_100000[0x200000-0x100000];
+
+	/* PCI/GIO Device Spaces 0x200000-0xBFFFFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x100000 / 1];
+		u16	s[0x100000 / 2];
+		u32	l[0x100000 / 4];
+		u64	d[0x100000 / 8];
+	} b_devio_raw[10];				/* 0x200000 */
+
+	/* b_devio macro is a bit strange; it reflects the
+	 * fact that the Bridge ASIC provides 2M for the
+	 * first two DevIO windows and 1M for the other six.
+	 */
+#define b_devio(n)	b_devio_raw[((n)<2)?(n*2):(n+2)]
+
+	/* External Flash Proms 1,0 0xC00000-0xFFFFFF */
+	union {		/* make all access sizes available. */
+		u8	c[0x400000 / 1];	/* read-only */
+		u16	s[0x400000 / 2];	/* read-write */
+		u32	l[0x400000 / 4];	/* read-only */
+		u64	d[0x400000 / 8];	/* read-only */
+	} b_external_flash;			/* 0xC00000 */
+} bridge_t;
+
+/*
+ * Field formats for Error Command Word and Auxillary Error Command Word
+ * of bridge.
+ */
+typedef struct bridge_err_cmdword_s {
+	union {
+		u32		cmd_word;
+		struct {
+			u32	didn:4,		/* Destination ID */
+				sidn:4,		/* Source ID	  */
+				pactyp:4,	/* Packet type	  */
+				tnum:5,		/* Trans Number	  */
+				coh:1,		/* Coh Transacti  */
+				ds:2,		/* Data size	  */
+				gbr:1,		/* GBR enable	  */
+				vbpm:1,		/* VBPM message	  */
+				error:1,	/* Error occurred  */
+				barr:1,		/* Barrier op	  */
+				rsvd:8;
+		} berr_st;
+	} berr_un;
+} bridge_err_cmdword_t;
+
+#define berr_field	berr_un.berr_st
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The values of these macros can and should be crosschecked
+ * regularly against the offsets of the like-named fields
+ * within the "bridge_t" structure above.
+ */
+
+/* Byte offset macros for Bridge internal registers */
+
+#define BRIDGE_WID_ID		WIDGET_ID
+#define BRIDGE_WID_STAT		WIDGET_STATUS
+#define BRIDGE_WID_ERR_UPPER	WIDGET_ERR_UPPER_ADDR
+#define BRIDGE_WID_ERR_LOWER	WIDGET_ERR_LOWER_ADDR
+#define BRIDGE_WID_CONTROL	WIDGET_CONTROL
+#define BRIDGE_WID_REQ_TIMEOUT	WIDGET_REQ_TIMEOUT
+#define BRIDGE_WID_INT_UPPER	WIDGET_INTDEST_UPPER_ADDR
+#define BRIDGE_WID_INT_LOWER	WIDGET_INTDEST_LOWER_ADDR
+#define BRIDGE_WID_ERR_CMDWORD	WIDGET_ERR_CMD_WORD
+#define BRIDGE_WID_LLP		WIDGET_LLP_CFG
+#define BRIDGE_WID_TFLUSH	WIDGET_TFLUSH
+
+#define BRIDGE_WID_AUX_ERR	0x00005C	/* Aux Error Command Word */
+#define BRIDGE_WID_RESP_UPPER	0x000064	/* Response Buf Upper Addr */
+#define BRIDGE_WID_RESP_LOWER	0x00006C	/* Response Buf Lower Addr */
+#define BRIDGE_WID_TST_PIN_CTRL 0x000074	/* Test pin control */
+
+#define BRIDGE_DIR_MAP		0x000084	/* Direct Map reg */
+
+#define BRIDGE_RAM_PERR		0x000094	/* SSRAM Parity Error */
+
+#define BRIDGE_ARB		0x0000A4	/* Arbitration Priority reg */
+
+#define BRIDGE_NIC		0x0000B4	/* Number In A Can */
+
+#define BRIDGE_BUS_TIMEOUT	0x0000C4	/* Bus Timeout Register */
+#define BRIDGE_PCI_BUS_TIMEOUT	BRIDGE_BUS_TIMEOUT
+#define BRIDGE_PCI_CFG		0x0000CC	/* PCI Type 1 Config reg */
+#define BRIDGE_PCI_ERR_UPPER	0x0000D4	/* PCI error Upper Addr */
+#define BRIDGE_PCI_ERR_LOWER	0x0000DC	/* PCI error Lower Addr */
+
+#define BRIDGE_INT_STATUS	0x000104	/* Interrupt Status */
+#define BRIDGE_INT_ENABLE	0x00010C	/* Interrupt Enables */
+#define BRIDGE_INT_RST_STAT	0x000114	/* Reset Intr Status */
+#define BRIDGE_INT_MODE		0x00011C	/* Interrupt Mode */
+#define BRIDGE_INT_DEVICE	0x000124	/* Interrupt Device */
+#define BRIDGE_INT_HOST_ERR	0x00012C	/* Host Error Field */
+
+#define BRIDGE_INT_ADDR0	0x000134	/* Host Address Reg */
+#define BRIDGE_INT_ADDR_OFF	0x000008	/* Host Addr offset (1..7) */
+#define BRIDGE_INT_ADDR(x)	(BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF)
+
+#define BRIDGE_DEVICE0		0x000204	/* Device 0 */
+#define BRIDGE_DEVICE_OFF	0x000008	/* Device offset (1..7) */
+#define BRIDGE_DEVICE(x)	(BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF)
+
+#define BRIDGE_WR_REQ_BUF0	0x000244	/* Write Request Buffer 0 */
+#define BRIDGE_WR_REQ_BUF_OFF	0x000008	/* Buffer Offset (1..7) */
+#define BRIDGE_WR_REQ_BUF(x)	(BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF)
+
+#define BRIDGE_EVEN_RESP	0x000284	/* Even Device Response Buf */
+#define BRIDGE_ODD_RESP		0x00028C	/* Odd Device Response Buf */
+
+#define BRIDGE_RESP_STATUS	0x000294	/* Read Response Status reg */
+#define BRIDGE_RESP_CLEAR	0x00029C	/* Read Response Clear reg */
+
+/* Byte offset macros for Bridge I/O space */
+
+#define BRIDGE_ATE_RAM		0x00010000	/* Internal Addr Xlat Ram */
+
+#define BRIDGE_TYPE0_CFG_DEV0	0x00020000	/* Type 0 Cfg, Device 0 */
+#define BRIDGE_TYPE0_CFG_SLOT_OFF	0x00001000	/* Type 0 Cfg Slot Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_FUNC_OFF	0x00000100	/* Type 0 Cfg Func Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_DEV(s)		(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF)
+#define BRIDGE_TYPE0_CFG_DEVF(s,f)	(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\
+					 (f)*BRIDGE_TYPE0_CFG_FUNC_OFF)
+
+#define BRIDGE_TYPE1_CFG	0x00028000	/* Type 1 Cfg space */
+
+#define BRIDGE_PCI_IACK		0x00030000	/* PCI Interrupt Ack */
+#define BRIDGE_EXT_SSRAM	0x00080000	/* Extern SSRAM (ATE) */
+
+/* Byte offset macros for Bridge device IO spaces */
+
+#define BRIDGE_DEV_CNT		8	/* Up to 8 devices per bridge */
+#define BRIDGE_DEVIO0		0x00200000	/* Device IO 0 Addr */
+#define BRIDGE_DEVIO1		0x00400000	/* Device IO 1 Addr */
+#define BRIDGE_DEVIO2		0x00600000	/* Device IO 2 Addr */
+#define BRIDGE_DEVIO_OFF	0x00100000	/* Device IO Offset (3..7) */
+
+#define BRIDGE_DEVIO_2MB	0x00200000	/* Device IO Offset (0..1) */
+#define BRIDGE_DEVIO_1MB	0x00100000	/* Device IO Offset (2..7) */
+
+#define BRIDGE_DEVIO(x)		((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB)
+
+#define BRIDGE_EXTERNAL_FLASH	0x00C00000	/* External Flash PROMS */
+
+/* ========================================================================
+ *    Bridge register bit field definitions
+ */
+
+/* Widget part number of bridge */
+#define BRIDGE_WIDGET_PART_NUM		0xc002
+#define XBRIDGE_WIDGET_PART_NUM		0xd002
+
+/* Manufacturer of bridge */
+#define BRIDGE_WIDGET_MFGR_NUM		0x036
+#define XBRIDGE_WIDGET_MFGR_NUM		0x024
+
+/* Revision numbers for known Bridge revisions */
+#define BRIDGE_REV_A			0x1
+#define BRIDGE_REV_B			0x2
+#define BRIDGE_REV_C			0x3
+#define	BRIDGE_REV_D			0x4
+
+/* Bridge widget status register bits definition */
+
+#define BRIDGE_STAT_LLP_REC_CNT		(0xFFu << 24)
+#define BRIDGE_STAT_LLP_TX_CNT		(0xFF << 16)
+#define BRIDGE_STAT_FLASH_SELECT	(0x1 << 6)
+#define BRIDGE_STAT_PCI_GIO_N		(0x1 << 5)
+#define BRIDGE_STAT_PENDING		(0x1F << 0)
+
+/* Bridge widget control register bits definition */
+#define BRIDGE_CTRL_FLASH_WR_EN		(0x1ul << 31)
+#define BRIDGE_CTRL_EN_CLK50		(0x1 << 30)
+#define BRIDGE_CTRL_EN_CLK40		(0x1 << 29)
+#define BRIDGE_CTRL_EN_CLK33		(0x1 << 28)
+#define BRIDGE_CTRL_RST(n)		((n) << 24)
+#define BRIDGE_CTRL_RST_MASK		(BRIDGE_CTRL_RST(0xF))
+#define BRIDGE_CTRL_RST_PIN(x)		(BRIDGE_CTRL_RST(0x1 << (x)))
+#define BRIDGE_CTRL_IO_SWAP		(0x1 << 23)
+#define BRIDGE_CTRL_MEM_SWAP		(0x1 << 22)
+#define BRIDGE_CTRL_PAGE_SIZE		(0x1 << 21)
+#define BRIDGE_CTRL_SS_PAR_BAD		(0x1 << 20)
+#define BRIDGE_CTRL_SS_PAR_EN		(0x1 << 19)
+#define BRIDGE_CTRL_SSRAM_SIZE(n)	((n) << 17)
+#define BRIDGE_CTRL_SSRAM_SIZE_MASK	(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_512K		(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_128K		(BRIDGE_CTRL_SSRAM_SIZE(0x2))
+#define BRIDGE_CTRL_SSRAM_64K		(BRIDGE_CTRL_SSRAM_SIZE(0x1))
+#define BRIDGE_CTRL_SSRAM_1K		(BRIDGE_CTRL_SSRAM_SIZE(0x0))
+#define BRIDGE_CTRL_F_BAD_PKT		(0x1 << 16)
+#define BRIDGE_CTRL_LLP_XBAR_CRD(n)	((n) << 12)
+#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK	(BRIDGE_CTRL_LLP_XBAR_CRD(0xf))
+#define BRIDGE_CTRL_CLR_RLLP_CNT	(0x1 << 11)
+#define BRIDGE_CTRL_CLR_TLLP_CNT	(0x1 << 10)
+#define BRIDGE_CTRL_SYS_END		(0x1 << 9)
+#define BRIDGE_CTRL_MAX_TRANS(n)	((n) << 4)
+#define BRIDGE_CTRL_MAX_TRANS_MASK	(BRIDGE_CTRL_MAX_TRANS(0x1f))
+#define BRIDGE_CTRL_WIDGET_ID(n)	((n) << 0)
+#define BRIDGE_CTRL_WIDGET_ID_MASK	(BRIDGE_CTRL_WIDGET_ID(0xf))
+
+/* Bridge Response buffer Error Upper Register bit fields definition */
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20)
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+#define BRIDGE_RESP_ERRRUPPR_BUFMASK	(0xFFFF)
+
+#define BRIDGE_RESP_ERRUPPR_BUFNUM(x)	\
+			(((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \
+				BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+
+#define BRIDGE_RESP_ERRUPPR_DEVICE(x)	\
+			(((x) &	 BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \
+				 BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+
+/* Bridge direct mapping register bits definition */
+#define BRIDGE_DIRMAP_W_ID_SHFT		20
+#define BRIDGE_DIRMAP_W_ID		(0xf << BRIDGE_DIRMAP_W_ID_SHFT)
+#define BRIDGE_DIRMAP_RMF_64		(0x1 << 18)
+#define BRIDGE_DIRMAP_ADD512		(0x1 << 17)
+#define BRIDGE_DIRMAP_OFF		(0x1ffff << 0)
+#define BRIDGE_DIRMAP_OFF_ADDRSHFT	(31)	/* lsbit of DIRMAP_OFF is xtalk address bit 31 */
+
+/* Bridge Arbitration register bits definition */
+#define BRIDGE_ARB_REQ_WAIT_TICK(x)	((x) << 16)
+#define BRIDGE_ARB_REQ_WAIT_TICK_MASK	BRIDGE_ARB_REQ_WAIT_TICK(0x3)
+#define BRIDGE_ARB_REQ_WAIT_EN(x)	((x) << 8)
+#define BRIDGE_ARB_REQ_WAIT_EN_MASK	BRIDGE_ARB_REQ_WAIT_EN(0xff)
+#define BRIDGE_ARB_FREEZE_GNT		(1 << 6)
+#define BRIDGE_ARB_HPRI_RING_B2		(1 << 5)
+#define BRIDGE_ARB_HPRI_RING_B1		(1 << 4)
+#define BRIDGE_ARB_HPRI_RING_B0		(1 << 3)
+#define BRIDGE_ARB_LPRI_RING_B2		(1 << 2)
+#define BRIDGE_ARB_LPRI_RING_B1		(1 << 1)
+#define BRIDGE_ARB_LPRI_RING_B0		(1 << 0)
+
+/* Bridge Bus time-out register bits definition */
+#define BRIDGE_BUS_PCI_RETRY_HLD(x)	((x) << 16)
+#define BRIDGE_BUS_PCI_RETRY_HLD_MASK	BRIDGE_BUS_PCI_RETRY_HLD(0x1f)
+#define BRIDGE_BUS_GIO_TIMEOUT		(1 << 12)
+#define BRIDGE_BUS_PCI_RETRY_CNT(x)	((x) << 0)
+#define BRIDGE_BUS_PCI_RETRY_MASK	BRIDGE_BUS_PCI_RETRY_CNT(0x3ff)
+
+/* Bridge interrupt status register bits definition */
+#define BRIDGE_ISR_MULTI_ERR		(0x1u << 31)
+#define BRIDGE_ISR_PMU_ESIZE_FAULT	(0x1 << 30)
+#define BRIDGE_ISR_UNEXP_RESP		(0x1 << 29)
+#define BRIDGE_ISR_BAD_XRESP_PKT	(0x1 << 28)
+#define BRIDGE_ISR_BAD_XREQ_PKT		(0x1 << 27)
+#define BRIDGE_ISR_RESP_XTLK_ERR	(0x1 << 26)
+#define BRIDGE_ISR_REQ_XTLK_ERR		(0x1 << 25)
+#define BRIDGE_ISR_INVLD_ADDR		(0x1 << 24)
+#define BRIDGE_ISR_UNSUPPORTED_XOP	(0x1 << 23)
+#define BRIDGE_ISR_XREQ_FIFO_OFLOW	(0x1 << 22)
+#define BRIDGE_ISR_LLP_REC_SNERR	(0x1 << 21)
+#define BRIDGE_ISR_LLP_REC_CBERR	(0x1 << 20)
+#define BRIDGE_ISR_LLP_RCTY		(0x1 << 19)
+#define BRIDGE_ISR_LLP_TX_RETRY		(0x1 << 18)
+#define BRIDGE_ISR_LLP_TCTY		(0x1 << 17)
+#define BRIDGE_ISR_SSRAM_PERR		(0x1 << 16)
+#define BRIDGE_ISR_PCI_ABORT		(0x1 << 15)
+#define BRIDGE_ISR_PCI_PARITY		(0x1 << 14)
+#define BRIDGE_ISR_PCI_SERR		(0x1 << 13)
+#define BRIDGE_ISR_PCI_PERR		(0x1 << 12)
+#define BRIDGE_ISR_PCI_MST_TIMEOUT	(0x1 << 11)
+#define BRIDGE_ISR_GIO_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_ISR_PCI_RETRY_CNT	(0x1 << 10)
+#define BRIDGE_ISR_XREAD_REQ_TIMEOUT	(0x1 << 9)
+#define BRIDGE_ISR_GIO_B_ENBL_ERR	(0x1 << 8)
+#define BRIDGE_ISR_INT_MSK		(0xff << 0)
+#define BRIDGE_ISR_INT(x)		(0x1 << (x))
+
+#define BRIDGE_ISR_LINK_ERROR		\
+		(BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR|	\
+		 BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY|		\
+		 BRIDGE_ISR_LLP_TCTY)
+
+#define BRIDGE_ISR_PCIBUS_PIOERR	\
+		(BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT)
+
+#define BRIDGE_ISR_PCIBUS_ERROR		\
+		(BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR|		\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT|		\
+		 BRIDGE_ISR_PCI_PARITY)
+
+#define BRIDGE_ISR_XTALK_ERROR		\
+		(BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\
+		 BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR|	\
+		 BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR|	\
+		 BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT|	\
+		 BRIDGE_ISR_UNEXP_RESP)
+
+#define BRIDGE_ISR_ERRORS		\
+		(BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR|		\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR|		\
+		 BRIDGE_ISR_PMU_ESIZE_FAULT)
+
+/*
+ * List of Errors which are fatal and kill the sytem
+ */
+#define BRIDGE_ISR_ERROR_FATAL		\
+		((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY )
+
+#define BRIDGE_ISR_ERROR_DUMP		\
+		(BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT|	\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR)
+
+/* Bridge interrupt enable register bits definition */
+#define BRIDGE_IMR_UNEXP_RESP		BRIDGE_ISR_UNEXP_RESP
+#define BRIDGE_IMR_PMU_ESIZE_FAULT	BRIDGE_ISR_PMU_ESIZE_FAULT
+#define BRIDGE_IMR_BAD_XRESP_PKT	BRIDGE_ISR_BAD_XRESP_PKT
+#define BRIDGE_IMR_BAD_XREQ_PKT		BRIDGE_ISR_BAD_XREQ_PKT
+#define BRIDGE_IMR_RESP_XTLK_ERR	BRIDGE_ISR_RESP_XTLK_ERR
+#define BRIDGE_IMR_REQ_XTLK_ERR		BRIDGE_ISR_REQ_XTLK_ERR
+#define BRIDGE_IMR_INVLD_ADDR		BRIDGE_ISR_INVLD_ADDR
+#define BRIDGE_IMR_UNSUPPORTED_XOP	BRIDGE_ISR_UNSUPPORTED_XOP
+#define BRIDGE_IMR_XREQ_FIFO_OFLOW	BRIDGE_ISR_XREQ_FIFO_OFLOW
+#define BRIDGE_IMR_LLP_REC_SNERR	BRIDGE_ISR_LLP_REC_SNERR
+#define BRIDGE_IMR_LLP_REC_CBERR	BRIDGE_ISR_LLP_REC_CBERR
+#define BRIDGE_IMR_LLP_RCTY		BRIDGE_ISR_LLP_RCTY
+#define BRIDGE_IMR_LLP_TX_RETRY		BRIDGE_ISR_LLP_TX_RETRY
+#define BRIDGE_IMR_LLP_TCTY		BRIDGE_ISR_LLP_TCTY
+#define BRIDGE_IMR_SSRAM_PERR		BRIDGE_ISR_SSRAM_PERR
+#define BRIDGE_IMR_PCI_ABORT		BRIDGE_ISR_PCI_ABORT
+#define BRIDGE_IMR_PCI_PARITY		BRIDGE_ISR_PCI_PARITY
+#define BRIDGE_IMR_PCI_SERR		BRIDGE_ISR_PCI_SERR
+#define BRIDGE_IMR_PCI_PERR		BRIDGE_ISR_PCI_PERR
+#define BRIDGE_IMR_PCI_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_IMR_GIO_MST_TIMEOUT	BRIDGE_ISR_GIO_MST_TIMEOUT
+#define BRIDGE_IMR_PCI_RETRY_CNT	BRIDGE_ISR_PCI_RETRY_CNT
+#define BRIDGE_IMR_XREAD_REQ_TIMEOUT	BRIDGE_ISR_XREAD_REQ_TIMEOUT
+#define BRIDGE_IMR_GIO_B_ENBL_ERR	BRIDGE_ISR_GIO_B_ENBL_ERR
+#define BRIDGE_IMR_INT_MSK		BRIDGE_ISR_INT_MSK
+#define BRIDGE_IMR_INT(x)		BRIDGE_ISR_INT(x)
+
+/* Bridge interrupt reset register bits definition */
+#define BRIDGE_IRR_MULTI_CLR		(0x1 << 6)
+#define BRIDGE_IRR_CRP_GRP_CLR		(0x1 << 5)
+#define BRIDGE_IRR_RESP_BUF_GRP_CLR	(0x1 << 4)
+#define BRIDGE_IRR_REQ_DSP_GRP_CLR	(0x1 << 3)
+#define BRIDGE_IRR_LLP_GRP_CLR		(0x1 << 2)
+#define BRIDGE_IRR_SSRAM_GRP_CLR	(0x1 << 1)
+#define BRIDGE_IRR_PCI_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_GIO_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_ALL_CLR		0x7f
+
+#define BRIDGE_IRR_CRP_GRP		(BRIDGE_ISR_UNEXP_RESP | \
+					 BRIDGE_ISR_XREQ_FIFO_OFLOW)
+#define BRIDGE_IRR_RESP_BUF_GRP		(BRIDGE_ISR_BAD_XRESP_PKT | \
+					 BRIDGE_ISR_RESP_XTLK_ERR | \
+					 BRIDGE_ISR_XREAD_REQ_TIMEOUT)
+#define BRIDGE_IRR_REQ_DSP_GRP		(BRIDGE_ISR_UNSUPPORTED_XOP | \
+					 BRIDGE_ISR_BAD_XREQ_PKT | \
+					 BRIDGE_ISR_REQ_XTLK_ERR | \
+					 BRIDGE_ISR_INVLD_ADDR)
+#define BRIDGE_IRR_LLP_GRP		(BRIDGE_ISR_LLP_REC_SNERR | \
+					 BRIDGE_ISR_LLP_REC_CBERR | \
+					 BRIDGE_ISR_LLP_RCTY | \
+					 BRIDGE_ISR_LLP_TX_RETRY | \
+					 BRIDGE_ISR_LLP_TCTY)
+#define BRIDGE_IRR_SSRAM_GRP		(BRIDGE_ISR_SSRAM_PERR | \
+					 BRIDGE_ISR_PMU_ESIZE_FAULT)
+#define BRIDGE_IRR_PCI_GRP		(BRIDGE_ISR_PCI_ABORT | \
+					 BRIDGE_ISR_PCI_PARITY | \
+					 BRIDGE_ISR_PCI_SERR | \
+					 BRIDGE_ISR_PCI_PERR | \
+					 BRIDGE_ISR_PCI_MST_TIMEOUT | \
+					 BRIDGE_ISR_PCI_RETRY_CNT)
+
+#define BRIDGE_IRR_GIO_GRP		(BRIDGE_ISR_GIO_B_ENBL_ERR | \
+					 BRIDGE_ISR_GIO_MST_TIMEOUT)
+
+/* Bridge INT_DEV register bits definition */
+#define BRIDGE_INT_DEV_SHFT(n)		((n)*3)
+#define BRIDGE_INT_DEV_MASK(n)		(0x7 << BRIDGE_INT_DEV_SHFT(n))
+#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line))
+
+/* Bridge interrupt(x) register bits definition */
+#define BRIDGE_INT_ADDR_HOST		0x0003FF00
+#define BRIDGE_INT_ADDR_FLD		0x000000FF
+
+#define BRIDGE_TMO_PCI_RETRY_HLD_MASK	0x1f0000
+#define BRIDGE_TMO_GIO_TIMEOUT_MASK	0x001000
+#define BRIDGE_TMO_PCI_RETRY_CNT_MASK	0x0003ff
+
+#define BRIDGE_TMO_PCI_RETRY_CNT_MAX	0x3ff
+
+/*
+ * The NASID should be shifted by this amount and stored into the
+ * interrupt(x) register.
+ */
+#define BRIDGE_INT_ADDR_NASID_SHFT	8
+
+/*
+ * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to
+ * memory.
+ */
+#define BRIDGE_INT_ADDR_DEST_IO		(1 << 17)
+#define BRIDGE_INT_ADDR_DEST_MEM	0
+#define BRIDGE_INT_ADDR_MASK		(1 << 17)
+
+/* Bridge device(x) register bits definition */
+#define BRIDGE_DEV_ERR_LOCK_EN		0x10000000
+#define BRIDGE_DEV_PAGE_CHK_DIS		0x08000000
+#define BRIDGE_DEV_FORCE_PCI_PAR	0x04000000
+#define BRIDGE_DEV_VIRTUAL_EN		0x02000000
+#define BRIDGE_DEV_PMU_WRGA_EN		0x01000000
+#define BRIDGE_DEV_DIR_WRGA_EN		0x00800000
+#define BRIDGE_DEV_DEV_SIZE		0x00400000
+#define BRIDGE_DEV_RT			0x00200000
+#define BRIDGE_DEV_SWAP_PMU		0x00100000
+#define BRIDGE_DEV_SWAP_DIR		0x00080000
+#define BRIDGE_DEV_PREF			0x00040000
+#define BRIDGE_DEV_PRECISE		0x00020000
+#define BRIDGE_DEV_COH			0x00010000
+#define BRIDGE_DEV_BARRIER		0x00008000
+#define BRIDGE_DEV_GBR			0x00004000
+#define BRIDGE_DEV_DEV_SWAP		0x00002000
+#define BRIDGE_DEV_DEV_IO_MEM		0x00001000
+#define BRIDGE_DEV_OFF_MASK		0x00000fff
+#define BRIDGE_DEV_OFF_ADDR_SHFT	20
+
+#define BRIDGE_DEV_PMU_BITS		(BRIDGE_DEV_PMU_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_PMU)
+#define BRIDGE_DEV_D32_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_PREF		| \
+					 BRIDGE_DEV_PRECISE		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+#define BRIDGE_DEV_D64_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+
+/* Bridge Error Upper register bit field definition */
+#define BRIDGE_ERRUPPR_DEVMASTER	(0x1 << 20)	/* Device was master */
+#define BRIDGE_ERRUPPR_PCIVDEV		(0x1 << 19)	/* Virtual Req value */
+#define BRIDGE_ERRUPPR_DEVNUM_SHFT	(16)
+#define BRIDGE_ERRUPPR_DEVNUM_MASK	(0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_ERRUPPR_DEVICE(err)	(((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7)
+#define BRIDGE_ERRUPPR_ADDRMASK		(0xFFFF)
+
+/* Bridge interrupt mode register bits definition */
+#define BRIDGE_INTMODE_CLR_PKT_EN(x)	(0x1 << (x))
+
+/* this should be written to the xbow's link_control(x) register */
+#define BRIDGE_CREDIT	3
+
+/* RRB assignment register */
+#define	BRIDGE_RRB_EN	0x8	/* after shifting down */
+#define	BRIDGE_RRB_DEV	0x7	/* after shifting down */
+#define	BRIDGE_RRB_VDEV	0x4	/* after shifting down */
+#define	BRIDGE_RRB_PDEV	0x3	/* after shifting down */
+
+/* RRB status register */
+#define	BRIDGE_RRB_VALID(r)	(0x00010000<<(r))
+#define	BRIDGE_RRB_INUSE(r)	(0x00000001<<(r))
+
+/* RRB clear register */
+#define	BRIDGE_RRB_CLEAR(r)	(0x00000001<<(r))
+
+/* xbox system controller declarations */
+#define XBOX_BRIDGE_WID         8
+#define FLASH_PROM1_BASE        0xE00000 /* To read the xbox sysctlr status */
+#define XBOX_RPS_EXISTS		1 << 6	 /* RPS bit in status register */
+#define XBOX_RPS_FAIL		1 << 4	 /* RPS status bit in register */
+
+/* ========================================================================
+ */
+/*
+ * Macros for Xtalk to Bridge bus (PCI/GIO) PIO
+ * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings
+ */
+/* XTALK addresses that map into Bridge Bus addr space */
+#define BRIDGE_PIO32_XTALK_ALIAS_BASE	0x000040000000L
+#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT	0x00007FFFFFFFL
+#define BRIDGE_PIO64_XTALK_ALIAS_BASE	0x000080000000L
+#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT	0x0000BFFFFFFFL
+#define BRIDGE_PCIIO_XTALK_ALIAS_BASE	0x000100000000L
+#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT	0x0001FFFFFFFFL
+
+/* Ranges of PCI bus space that can be accessed via PIO from xtalk */
+#define BRIDGE_MIN_PIO_ADDR_MEM		0x00000000	/* 1G PCI memory space */
+#define BRIDGE_MAX_PIO_ADDR_MEM		0x3fffffff
+#define BRIDGE_MIN_PIO_ADDR_IO		0x00000000	/* 4G PCI IO space */
+#define BRIDGE_MAX_PIO_ADDR_IO		0xffffffff
+
+/* XTALK addresses that map into PCI addresses */
+#define BRIDGE_PCI_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_MEM64_BASE		BRIDGE_PIO64_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM64_LIMIT		BRIDGE_PIO64_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_IO_BASE		BRIDGE_PCIIO_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_IO_LIMIT		BRIDGE_PCIIO_XTALK_ALIAS_LIMIT
+
+/*
+ * Macros for Bridge bus (PCI/GIO) to Xtalk DMA
+ */
+/* Bridge Bus DMA addresses */
+#define BRIDGE_LOCAL_BASE		0
+#define BRIDGE_DMA_MAPPED_BASE		0x40000000
+#define BRIDGE_DMA_MAPPED_SIZE		0x40000000	/* 1G Bytes */
+#define BRIDGE_DMA_DIRECT_BASE		0x80000000
+#define BRIDGE_DMA_DIRECT_SIZE		0x80000000	/* 2G Bytes */
+
+#define PCI32_LOCAL_BASE		BRIDGE_LOCAL_BASE
+
+/* PCI addresses of regions decoded by Bridge for DMA */
+#define PCI32_MAPPED_BASE		BRIDGE_DMA_MAPPED_BASE
+#define PCI32_DIRECT_BASE		BRIDGE_DMA_DIRECT_BASE
+
+#define IS_PCI32_LOCAL(x)	((ulong_t)(x) < PCI32_MAPPED_BASE)
+#define IS_PCI32_MAPPED(x)	((ulong_t)(x) < PCI32_DIRECT_BASE && \
+					(ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x)	((ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI64(x)		((ulong_t)(x) >= PCI64_BASE)
+
+/*
+ * The GIO address space.
+ */
+/* Xtalk to GIO PIO */
+#define BRIDGE_GIO_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_GIO_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+
+#define GIO_LOCAL_BASE			BRIDGE_LOCAL_BASE
+
+/* GIO addresses of regions decoded by Bridge for DMA */
+#define GIO_MAPPED_BASE			BRIDGE_DMA_MAPPED_BASE
+#define GIO_DIRECT_BASE			BRIDGE_DMA_DIRECT_BASE
+
+#define IS_GIO_LOCAL(x)		((ulong_t)(x) < GIO_MAPPED_BASE)
+#define IS_GIO_MAPPED(x)	((ulong_t)(x) < GIO_DIRECT_BASE && \
+					(ulong_t)(x) >= GIO_MAPPED_BASE)
+#define IS_GIO_DIRECT(x)	((ulong_t)(x) >= GIO_MAPPED_BASE)
+
+/* PCI to xtalk mapping */
+
+/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine
+ * which xtalk address is accessed
+ */
+#define BRIDGE_DIRECT_32_SEG_SIZE	BRIDGE_DMA_DIRECT_SIZE
+#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr)		\
+	((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE +	\
+		((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE)
+
+/* 64-bit address attribute masks */
+#define PCI64_ATTR_TARG_MASK	0xf000000000000000
+#define PCI64_ATTR_TARG_SHFT	60
+#define PCI64_ATTR_PREF		0x0800000000000000
+#define PCI64_ATTR_PREC		0x0400000000000000
+#define PCI64_ATTR_VIRTUAL	0x0200000000000000
+#define PCI64_ATTR_BAR		0x0100000000000000
+#define PCI64_ATTR_RMF_MASK	0x00ff000000000000
+#define PCI64_ATTR_RMF_SHFT	48
+
+#ifndef __ASSEMBLY__
+/* Address translation entry for mapped pci32 accesses */
+typedef union ate_u {
+	u64	ent;
+	struct ate_s {
+		u64	rmf:16;
+		u64	addr:36;
+		u64	targ:4;
+		u64	reserved:3;
+		u64	barrier:1;
+		u64	prefetch:1;
+		u64	precise:1;
+		u64	coherent:1;
+		u64	valid:1;
+	} field;
+} ate_t;
+#endif /* !__ASSEMBLY__ */
+
+#define ATE_V		0x01
+#define ATE_CO		0x02
+#define ATE_PREC	0x04
+#define ATE_PREF	0x08
+#define ATE_BAR		0x10
+
+#define ATE_PFNSHIFT		12
+#define ATE_TIDSHIFT		8
+#define ATE_RMFSHIFT		48
+
+#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \
+				((xid)<<ATE_TIDSHIFT) | \
+				(attr)
+
+#define BRIDGE_INTERNAL_ATES	128
+
+struct bridge_controller {
+	struct pci_controller	pc;
+	struct resource		mem;
+	struct resource		io;
+	bridge_t		*base;
+	nasid_t			nasid;
+	unsigned int		widget_id;
+	unsigned int 		irq_cpu;
+	dma64_addr_t		baddr;
+	unsigned int		pci_int[8];
+};
+
+#define BRIDGE_CONTROLLER(bus) \
+	((struct bridge_controller *)((bus)->sysdata))
+
+extern void register_bridge_irq(unsigned int irq);
+extern int request_bridge_irq(struct bridge_controller *bc);
+
+#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/include/asm-mips/percpu.h b/include/asm-mips/percpu.h
new file mode 100644
index 000000000000..844e763e9332
--- /dev/null
+++ b/include/asm-mips/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_PERCPU_H */
diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h
new file mode 100644
index 000000000000..2d63f5ba403f
--- /dev/null
+++ b/include/asm-mips/pgalloc.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/highmem.h>
+#include <linux/mm.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+	pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	struct page *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret, *init;
+
+	ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+	if (ret) {
+		init = pgd_offset(&init_mm, 0);
+		pgd_init((unsigned long)ret);
+		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return ret;
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+	if (pte)
+		clear_highpage(pte);
+
+	return pte;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb,pte)		tlb_remove_page((tlb),(pte))
+
+#ifdef CONFIG_MIPS32
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS64
+
+#define pgd_populate(mm, pgd, pmd)	set_pgd(pgd, __pgd(pmd))
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd;
+
+	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER);
+	if (pmd)
+		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+	return pmd;
+}
+
+static inline void pmd_free(pmd_t *pmd)
+{
+	free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#define __pmd_free_tlb(tlb,x)	pmd_free(x)
+
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
new file mode 100644
index 000000000000..41a0df7d7768
--- /dev/null
+++ b/include/asm-mips/pgtable-32.h
@@ -0,0 +1,243 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_32_H
+#define _ASM_PGTABLE_32_H
+
+#include <linux/config.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+#include <linux/linkage.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+/*
+ * - add_wired_entry() add a fixed TLB entry, and move wired register
+ */
+extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ *	starting at the top and working down. This is for populating the
+ *	TLB before trap_init() puts the TLB miss handler in place. It
+ *	should be used only for entries matching the actual page tables,
+ *	to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+
+/* Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386.  Some day
+ * when we have proper page coloring support we can have a 1% quicker
+ * tlb refill handling mechanism, but for now it is a bit slower but
+ * works even with the cache aliasing problem the R4k and above have.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define PMD_SHIFT	21
+#else
+#define PMD_SHIFT	22
+#endif
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PMD directory physically.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define PGD_ORDER	1
+#define PMD_ORDER	0
+#define PTE_ORDER	0
+#else
+#define PGD_ORDER	0
+#define PMD_ORDER	0
+#define PTE_ORDER	0
+#endif
+
+#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define VMALLOC_START     KSEG2
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#endif
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void load_pgd(unsigned long pg_dir);
+
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t *pgdp)	{ }
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
+static inline pte_t
+pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	pte_t pte;
+	pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
+	pte.pte_low = pgprot_val(prot);
+	return pte;
+}
+
+#else
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pgd_index(address)	((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm,addr)	((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) (pmd_page_kernel(*dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  __pte_offset(address))
+
+#define pte_offset_map(dir, address)                                    \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)                             \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+/* Swap entries must have VALID bit cleared. */
+#define __swp_type(x)		(((x).val >> 10) & 0x1f)
+#define __swp_offset(x)		((x).val >> 15)
+#define __swp_entry(type,offset)	\
+	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+
+/*
+ * Bits 0, 1, 2, 9 and 10 are taken, split up the 27 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	27
+
+#define pte_to_pgoff(_pte) \
+	((((_pte).pte >> 3) & 0x3f ) + (((_pte).pte >> 11) << 8 ))
+
+#define pgoff_to_pte(off) \
+	((pte_t) { (((off) & 0x3f) << 3) + (((off) >> 8) << 11) + _PAGE_FILE })
+
+#else
+
+/* Swap entries must have VALID and GLOBAL bits cleared. */
+#define __swp_type(x)		(((x).val >> 8) & 0x1f)
+#define __swp_offset(x)		((x).val >> 13)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+
+/*
+ * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	27
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+	/* fixme */
+#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
+#define pgoff_to_pte(off) \
+ 	((pte_t){(((off) & 0x3f) + ((off) << 6) + _PAGE_FILE)})
+
+#else
+#define pte_to_pgoff(_pte) \
+	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+
+#define pgoff_to_pte(off) \
+	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#endif
+
+#endif
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#endif /* _ASM_PGTABLE_32_H */
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
new file mode 100644
index 000000000000..704b551f59e9
--- /dev/null
+++ b/include/asm-mips/pgtable-64.h
@@ -0,0 +1,227 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_64_H
+#define _ASM_PGTABLE_64_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/cachectl.h>
+
+/*
+ * Each address space has 2 4K pages as its page directory, giving 1024
+ * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
+ * pair of 4K pages, giving 1024 (== PTRS_PER_PMD) 8 byte pointers to
+ * page tables. Each page table is a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pgde is initialized to point to
+ * invalid_pmd_table, each pmde is initialized to point to
+ * invalid_pte_table, each pte is initialized to 0. When memory is low,
+ * and a pmd table or a page table allocation fails, empty_bad_pmd_table
+ * and empty_bad_page_table is returned back to higher layer code, so
+ * that the failure is recognized later on. Linux does not seem to
+ * handle these failures very well though. The empty_bad_page_table has
+ * invalid pte entries in it, to force page faults.
+ *
+ * Kernel mappings: kernel mappings are held in the swapper_pg_table.
+ * The layout is identical to userspace except it's indexed with the
+ * fault address - VMALLOC_START.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT - 3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + (PAGE_SHIFT + 1 - 3))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * For 4kB page size we use a 3 level page tree and a 8kB pmd and pgds which
+ * permits us mapping 40 bits of virtual address space.
+ *
+ * We used to implement 41 bits by having an order 1 pmd level but that seemed
+ * rather pointless.
+ *
+ * For 8kB page size we use a 3 level page tree which permits a total of
+ * 8TB of address space.  Alternatively a 33-bit / 8GB organization using
+ * two levels would be easy to implement.
+ *
+ * For 16kB page size we use a 2 level page tree which permits a total of
+ * 36 bits of virtual address space.  We could add a third leve. but it seems
+ * like at the moment there's no need for this.
+ *
+ * For 64kB page size we use a 2 level page table tree for a total of 42 bits
+ * of virtual address space.
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PGD_ORDER		1
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PGD_ORDER		0
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PGD_ORDER		0
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PGD_ORDER		0
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+
+#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PMD	((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define VMALLOC_START		XKSEG
+#define VMALLOC_END	\
+	(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+extern pte_t empty_bad_page_table[PAGE_SIZE/sizeof(pte_t)];
+extern pmd_t invalid_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
+extern pmd_t empty_bad_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
+
+/*
+ * Empty pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+/*
+ * Empty pgd entries point to the invalid_pmd_table.
+ */
+static inline int pgd_none(pgd_t pgd)
+{
+	return pgd_val(pgd) == (unsigned long) invalid_pmd_table;
+}
+
+#define pgd_bad(pgd)		(pgd_val(pgd) &~ PAGE_MASK)
+
+static inline int pgd_present(pgd_t pgd)
+{
+	return pgd_val(pgd) != (unsigned long) invalid_pmd_table;
+}
+
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	pgd_val(*pgdp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x)		pfn_to_page((unsigned long)((pte_val(x) >> PAGE_SHIFT)))
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+
+#define __pgd_offset(address)	pgd_index(address)
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, 0)
+
+#define pgd_index(address)		((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm,addr)	((mm)->pgd + pgd_index(addr))
+
+static inline unsigned long pgd_page(pgd_t pgd)
+{
+	return pgd_val(pgd);
+}
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) pgd_page(*dir) +
+	       ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1));
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) (pmd_page_kernel(*dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_kernel(*(dir)) +  __pte_offset(address))
+#define pte_offset_map(dir, address)					\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)				\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+/*
+ * Non-present pages:  high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_offset(x)		((x).val >> 40)
+#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+/*
+ * Bits 0, 1, 2, 7 and 8 are taken, split up the 32 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	32
+
+#define pte_to_pgoff(_pte) \
+	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+
+#define pgoff_to_pte(off) \
+	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+
+#endif /* _ASM_PGTABLE_64_H */
diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h
new file mode 100644
index 000000000000..3aad751ccd5f
--- /dev/null
+++ b/include/asm-mips/pgtable-bits.h
@@ -0,0 +1,149 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2002 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_PGTABLE_BITS_H
+#define _ASM_PGTABLE_BITS_H
+
+#include <linux/config.h>
+
+/*
+ * Note that we shift the lower 32bits of each EntryLo[01] entry
+ * 6 bits to the left. That way we can convert the PFN into the
+ * physical address by a single 'and' operation and gain 6 additional
+ * bits for storing information which isn't present in a normal
+ * MIPS page table.
+ *
+ * Similar to the Alpha port, we need to keep track of the ref
+ * and mod bits in software.  We have a software "yeah you can read
+ * from this page" bit, and a hardware one which actually lets the
+ * process read from the page.  On the same token we have a software
+ * writable bit and the real hardware one which actually lets the
+ * process write to the page, this keeps a mod bit via the hardware
+ * dirty bit.
+ *
+ * Certain revisions of the R4000 and R5000 have a bug where if a
+ * certain sequence occurs in the last 3 instructions of an executable
+ * page, and the following page is not mapped, the cpu can do
+ * unpredictable things.  The code (when it is written) to deal with
+ * this problem will be in the update_mmu_cache() code for the r4k.
+ */
+#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+
+#define _PAGE_PRESENT               (1<<6)  /* implemented in software */
+#define _PAGE_READ                  (1<<7)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<8)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<9)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<10) /* implemented in software */
+#define _PAGE_FILE                  (1<<10)  /* set:pagecache unset:swap */
+
+#define _PAGE_R4KBUG                (1<<0)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<0)
+#define _PAGE_VALID                 (1<<1)
+#define _PAGE_SILENT_READ           (1<<1)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<2)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<2)
+#define _CACHE_MASK                 (7<<3)
+
+/* MIPS32 defines only values 2 and 3. The rest are implementation
+ * dependent.
+ */
+#define _CACHE_UNCACHED             (2<<3)
+#define _CACHE_CACHABLE_NONCOHERENT (3<<3)
+#define _CACHE_CACHABLE_COW         (3<<3)  /* Au1x                    */
+
+#else
+
+#define _PAGE_PRESENT               (1<<0)  /* implemented in software */
+#define _PAGE_READ                  (1<<1)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<2)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<3)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<4)  /* implemented in software */
+#define _PAGE_FILE                  (1<<4)  /* set:pagecache unset:swap */
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _PAGE_GLOBAL                (1<<8)
+#define _PAGE_VALID                 (1<<9)
+#define _PAGE_SILENT_READ           (1<<9)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<10) /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<10)
+#define _CACHE_UNCACHED             (1<<11)
+#define _CACHE_MASK                 (1<<11)
+#define _CACHE_CACHABLE_NONCOHERENT 0
+
+#else
+#define _PAGE_R4KBUG                (1<<5)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<6)
+#define _PAGE_VALID                 (1<<7)
+#define _PAGE_SILENT_READ           (1<<7)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<8)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<8)
+#define _CACHE_MASK                 (7<<9)
+
+#ifdef CONFIG_CPU_SB1
+
+/* No penalty for being coherent on the SB1, so just
+   use it for "noncoherent" spaces, too.  Shouldn't hurt. */
+
+#define _CACHE_UNCACHED             (2<<9)
+#define _CACHE_CACHABLE_COW         (5<<9)
+#define _CACHE_CACHABLE_NONCOHERENT (5<<9)
+#define _CACHE_UNCACHED_ACCELERATED (7<<9)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define _CACHE_WT			(0 << 9)
+#define _CACHE_WTWA			(1 << 9)
+#define _CACHE_UC_B			(2 << 9)
+#define _CACHE_WB			(3 << 9)
+#define _CACHE_CWBEA			(4 << 9)
+#define _CACHE_CWB			(5 << 9)
+#define _CACHE_UCNB			(6 << 9)
+#define _CACHE_FPC			(7 << 9)
+
+#define _CACHE_UNCACHED			_CACHE_UC_B
+#define _CACHE_CACHABLE_NONCOHERENT	_CACHE_WB
+
+#else
+
+#define _CACHE_CACHABLE_NO_WA       (0<<9)  /* R4600 only              */
+#define _CACHE_CACHABLE_WA          (1<<9)  /* R4600 only              */
+#define _CACHE_UNCACHED             (2<<9)  /* R4[0246]00              */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<9)  /* R4[0246]00              */
+#define _CACHE_CACHABLE_CE          (4<<9)  /* R4[04]00MC only         */
+#define _CACHE_CACHABLE_COW         (5<<9)  /* R4[04]00MC only         */
+#define _CACHE_CACHABLE_CUW         (6<<9)  /* R4[04]00MC only         */
+#define _CACHE_UNCACHED_ACCELERATED (7<<9)  /* R10000 only             */
+
+#endif
+#endif
+#endif /* defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR) */
+
+#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+
+#ifdef CONFIG_MIPS_UNCACHED
+#define PAGE_CACHABLE_DEFAULT	_CACHE_UNCACHED
+#elif defined(CONFIG_DMA_NONCOHERENT)
+#define PAGE_CACHABLE_DEFAULT	_CACHE_CACHABLE_NONCOHERENT
+#elif defined(CONFIG_CPU_RM9000)
+#define PAGE_CACHABLE_DEFAULT	_CACHE_CWB
+#else
+#define PAGE_CACHABLE_DEFAULT	_CACHE_CACHABLE_COW
+#endif
+
+#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#define CONF_CM_DEFAULT		(PAGE_CACHABLE_DEFAULT >> 3)
+#else
+#define CONF_CM_DEFAULT		(PAGE_CACHABLE_DEFAULT >> 9)
+#endif
+
+#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
new file mode 100644
index 000000000000..878843203d67
--- /dev/null
+++ b/include/asm-mips/pgtable.h
@@ -0,0 +1,404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#ifdef CONFIG_MIPS32
+#include <asm/pgtable-32.h>
+#endif
+#ifdef CONFIG_MIPS64
+#include <asm/pgtable-64.h>
+#endif
+
+#include <asm/pgtable-bits.h>
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			PAGE_CACHABLE_DEFAULT)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+			PAGE_CACHABLE_DEFAULT)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+			PAGE_CACHABLE_DEFAULT)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+			_PAGE_GLOBAL | PAGE_CACHABLE_DEFAULT)
+#define PAGE_USERIO	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			PAGE_CACHABLE_DEFAULT)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+			__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
+
+/*
+ * MIPS can't do page protection for execute, and considers that the same like
+ * read. Also, write permissions imply read permissions. This is the closest
+ * we can get by reasonable means..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero; used
+ * for zero-mapped memory areas etc..
+ */
+
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+#define ZERO_PAGE(vaddr) \
+	(virt_to_page(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))
+
+extern void paging_init(void);
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define page_pte(page)		page_pte_prot(page, __pgprot(0))
+#define pmd_phys(pmd)		(pmd_val(pmd) - PAGE_OFFSET)
+#define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define pmd_page_kernel(pmd)	pmd_val(pmd)
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+	//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
+
+	if (pte_val(pte) & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy))
+			buddy->pte_low |= _PAGE_GLOBAL;
+	}
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	/* Preserve global status for the pair */
+	if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
+		set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
+	else
+		set_pte_at(mm, addr, ptep, __pte(0));
+}
+#else
+/*
+ * Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	*ptep = pteval;
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	if (pte_val(pteval) & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy))
+			pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+	}
+#endif
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	/* Preserve global status for the pair */
+	if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
+		set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
+	else
+#endif
+		set_pte_at(mm, addr, ptep, __pte(0));
+}
+#endif
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
+#define set_pgd(pgdptr, pgdval) do { *(pgdptr) = (pgdval); } while(0)
+
+#define PGD_T_LOG2	ffz(~sizeof(pgd_t))
+#define PMD_T_LOG2	ffz(~sizeof(pmd_t))
+#define PTE_T_LOG2	ffz(~sizeof(pte_t))
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)	{ BUG(); return 0; }
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline int pte_read(pte_t pte)	{ return (pte).pte_low & _PAGE_READ; }
+static inline int pte_write(pte_t pte)	{ return (pte).pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return (pte).pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return (pte).pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return (pte).pte_low & _PAGE_FILE; }
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	(pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	(pte).pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	(pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+	(pte).pte_high &= ~_PAGE_SILENT_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	(pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	(pte).pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	(pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	(pte).pte_high &= ~_PAGE_SILENT_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	(pte).pte_low |= _PAGE_WRITE;
+	if ((pte).pte_low & _PAGE_MODIFIED) {
+		(pte).pte_low |= _PAGE_SILENT_WRITE;
+		(pte).pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	(pte).pte_low |= _PAGE_READ;
+	if ((pte).pte_low & _PAGE_ACCESSED) {
+		(pte).pte_low |= _PAGE_SILENT_READ;
+		(pte).pte_high |= _PAGE_SILENT_READ;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	(pte).pte_low |= _PAGE_MODIFIED;
+	if ((pte).pte_low & _PAGE_WRITE) {
+		(pte).pte_low |= _PAGE_SILENT_WRITE;
+		(pte).pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	(pte).pte_low |= _PAGE_ACCESSED;
+	if ((pte).pte_low & _PAGE_READ)
+		(pte).pte_low |= _PAGE_SILENT_READ;
+		(pte).pte_high |= _PAGE_SILENT_READ;
+	return pte;
+}
+#else
+static inline int pte_read(pte_t pte)	{ return pte_val(pte) & _PAGE_READ; }
+static inline int pte_write(pte_t pte)	{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_READ;
+	if (pte_val(pte) & _PAGE_ACCESSED)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+#endif
+
+/*
+ * Macro to make mark a page protection value as "uncacheable".  Note
+ * that "protection" is really a misnomer here as the protection value
+ * contains the memory attribute bits, dirty bits, and various other
+ * bits as well.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+
+	return __pgprot(prot);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+	pte.pte_high |= pgprot_val(newprot) & 0x3f;
+	return pte;
+}
+#else
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+#endif
+
+
+extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t pte)
+{
+	__update_tlb(vma, address, pte);
+	__update_cache(vma, address, pte);
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+#define kern_addr_valid(addr)	(1)
+#endif
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size);
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
+
+static inline int io_remap_page_range(struct vm_area_struct *vma,
+		unsigned long vaddr,
+		unsigned long paddr,
+		unsigned long size,
+		pgprot_t prot)
+{
+	phys_t phys_addr_high = fixup_bigphys_addr(paddr, size);
+	return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
+}
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+		unsigned long vaddr,
+		unsigned long pfn,
+		unsigned long size,
+		pgprot_t prot)
+{
+	phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+	return remap_pfn_range(vma, vaddr, pfn, size, prot);
+}
+#else
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own get_unmapped area to cope with the virtual aliasing
+ * constraints placed on us by the cache architecture.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/include/asm-mips/pmon.h b/include/asm-mips/pmon.h
new file mode 100644
index 000000000000..260f3448ccf1
--- /dev/null
+++ b/include/asm-mips/pmon.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * The cpustart method is a PMC-Sierra's function to start the secondary CPU.
+ * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead.
+ */
+#ifndef _ASM_PMON_H
+#define _ASM_PMON_H
+
+struct callvectors {
+	int	(*open) (char*, int, int);
+	int	(*close) (int);
+	int	(*read) (int, void*, int);
+	int	(*write) (int, void*, int);
+	off_t	(*lseek) (int, off_t, int);
+	int	(*printf) (const char*, ...);
+	void	(*cacheflush) (void);
+	char*	(*gets) (char*);
+	union {
+		int	(*smpfork) (unsigned long cp, char *sp);
+		int	(*cpustart) (long, long, long, long);
+	} _s;
+	int	(*semlock) (int sem);
+	void	(*semunlock) (int sem);
+};
+
+extern struct callvectors *debug_vectors;
+
+#define pmon_open(name, flags, mode)	debug_vectors->open(name, flage, mode)
+#define pmon_close(fd)			debug_vectors->close(fd)
+#define pmon_read(fd, buf, count)	debug_vectors->read(fd, buf, count)
+#define pmon_write(fd, buf, count)	debug_vectors->write(fd, buf, count)
+#define pmon_lseek(fd, off, whence)	debug_vectors->lseek(fd, off, whence)
+#define pmon_printf(fmt...)		debug_vectors->printf(fmt)
+#define pmon_cacheflush()		debug_vectors->cacheflush()
+#define pmon_gets(s)			debug_vectors->gets(s)
+#define pmon_cpustart(n, f, sp, gp)	debug_vectors->_s.cpustart(n, f, sp, gp)
+#define pmon_smpfork(cp, sp)		debug_vectors->_s.smpfork(cp, sp)
+#define pmon_semlock(sem)		debug_vectors->semlock(sem)
+#define pmon_semunlock(sem)		debug_vectors->semunlock(sem)
+
+#endif /* _ASM_PMON_H */
diff --git a/include/asm-mips/poll.h b/include/asm-mips/poll.h
new file mode 100644
index 000000000000..a000f1f789e3
--- /dev/null
+++ b/include/asm-mips/poll.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_POLL_H
+#define __ASM_POLL_H
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	0x0100
+
+/* These seem to be more or less nonstandard ...  */
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __ASM_POLL_H */
diff --git a/include/asm-mips/posix_types.h b/include/asm-mips/posix_types.h
new file mode 100644
index 000000000000..c2e8a0070daf
--- /dev/null
+++ b/include/asm-mips/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+#include <asm/sgidefs.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long	__kernel_nlink_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned int	__kernel_nlink_t;
+#endif
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long      __kernel_loff_t;
+#endif
+
+typedef struct {
+#if (_MIPS_SZLONG == 32)
+	long	val[2];
+#endif
+#if (_MIPS_SZLONG == 64)
+	int	val[2];
+#endif
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/include/asm-mips/prctl.h b/include/asm-mips/prctl.h
new file mode 100644
index 000000000000..4aaaff670361
--- /dev/null
+++ b/include/asm-mips/prctl.h
@@ -0,0 +1,41 @@
+/*
+ * IRIX prctl interface
+ *
+ * The IRIX kernel maps a page at PRDA_ADDRESS with the
+ * contents of prda and fills it the bits on prda_sys.
+ */
+
+#ifndef __PRCTL_H__
+#define __PRCTL_H__
+
+#define PRDA_ADDRESS 0x200000L
+#define PRDA ((struct prda *) PRDA_ADDRESS)
+
+struct prda_sys {
+	pid_t t_pid;
+        u32   t_hint;
+        u32   t_dlactseq;
+        u32   t_fpflags;
+        u32   t_prid;		/* processor type, $prid CP0 register */
+        u32   t_dlendseq;
+        u64   t_unused1[5];
+        pid_t t_rpid;
+        s32   t_resched;
+        u32   t_unused[8];
+        u32   t_cpu;		/* current/last cpu */
+
+	/* FIXME: The signal information, not supported by Linux now */
+	u32   t_flags;		/* if true, then the sigprocmask is in userspace */
+	u32   t_sigprocmask [1]; /* the sigprocmask */
+};
+
+struct prda {
+	char fill [0xe00];
+	struct prda_sys prda_sys;
+};
+
+#define t_sys           prda_sys
+
+ptrdiff_t prctl (int op, int v1, int v2);
+
+#endif
diff --git a/include/asm-mips/prefetch.h b/include/asm-mips/prefetch.h
new file mode 100644
index 000000000000..71293ec1657c
--- /dev/null
+++ b/include/asm-mips/prefetch.h
@@ -0,0 +1,88 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_PREFETCH_H
+#define __ASM_PREFETCH_H
+
+#include <linux/config.h>
+
+/*
+ * R5000 and RM5200 implements pref and prefx instructions but they're nops, so
+ * rather than wasting time we pretend these processors don't support
+ * prefetching at all.
+ *
+ * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained,
+ * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore.
+ *
+ * Hell (and the book on my shelf I can't open ...) know what the R8000 does.
+ *
+ * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements
+ * Pref_PrepareForStore also.
+ *
+ * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's
+ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
+ * current versions due to erratum G105.
+ *
+ * VR7701 only implements the Load prefetch.
+ *
+ * Finally MIPS32 and MIPS64 implement all of the following hints.
+ */
+
+#define Pref_Load			0
+#define Pref_Store			1
+						/* 2 and 3 are reserved */
+#define Pref_LoadStreamed		4
+#define Pref_StoreStreamed		5
+#define Pref_LoadRetained		6
+#define Pref_StoreRetained		7
+						/* 8 ... 24 are reserved */
+#define Pref_WriteBackInvalidate	25
+#define Pref_PrepareForStore		30
+
+#ifdef __ASSEMBLY__
+
+	.macro	__pref hint addr
+#ifdef CONFIG_CPU_HAS_PREFETCH
+	pref	\hint, \addr
+#endif
+	.endm
+
+	.macro	pref_load addr
+	__pref	Pref_Load, \addr
+	.endm
+
+	.macro	pref_store addr
+	__pref	Pref_Store, \addr
+	.endm
+
+	.macro	pref_load_streamed addr
+	__pref	Pref_LoadStreamed, \addr
+	.endm
+
+	.macro	pref_store_streamed addr
+	__pref	Pref_StoreStreamed, \addr
+	.endm
+
+	.macro	pref_load_retained addr
+	__pref	Pref_LoadRetained, \addr
+	.endm
+
+	.macro	pref_store_retained addr
+	__pref	Pref_StoreRetained, \addr
+	.endm
+
+	.macro	pref_wback_inv addr
+	__pref	Pref_WriteBackInvalidate, \addr
+	.endm
+
+	.macro	pref_prepare_for_store addr
+	__pref	Pref_PrepareForStore, \addr
+	.endm
+
+#endif
+
+#endif /* __ASM_PREFETCH_H */
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
new file mode 100644
index 000000000000..13c54d5b3b48
--- /dev/null
+++ b/include/asm-mips/processor.h
@@ -0,0 +1,220 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+#include <asm/cachectl.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/mipsregs.h>
+#include <asm/prefetch.h>
+#include <asm/system.h>
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern unsigned int vced_count, vcei_count;
+
+#ifdef CONFIG_MIPS32
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	0x7fff8000UL
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+#endif
+
+#ifdef CONFIG_MIPS64
+/*
+ * User space process size: 1TB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.  TASK_SIZE
+ * is limited to 1TB by the R4000 architecture; R10000 and better can
+ * support 16TB; the architectural reserve for future expansion is
+ * 8192EB ...
+ */
+#define TASK_SIZE32	0x7fff8000UL
+#define TASK_SIZE	0x10000000000UL
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	((current->thread.mflags & MF_32BIT_ADDR) ? \
+	PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
+#endif
+
+#define NUM_FPU_REGS	32
+
+typedef __u64 fpureg_t;
+
+struct mips_fpu_hard_struct {
+	fpureg_t	fpr[NUM_FPU_REGS];
+	unsigned int	fcr31;
+};
+
+/*
+ * It would be nice to add some more fields for emulator statistics, but there
+ * are a number of fixed offsets in offset.h and elsewhere that would have to
+ * be recalculated by hand.  So the additional information will be private to
+ * the FPU emulator for now.  See asm-mips/fpu_emulator.h.
+ */
+
+struct mips_fpu_soft_struct {
+	fpureg_t	fpr[NUM_FPU_REGS];
+	unsigned int	fcr31;
+};
+
+union mips_fpu_union {
+        struct mips_fpu_hard_struct hard;
+        struct mips_fpu_soft_struct soft;
+};
+
+#define INIT_FPU { \
+	{{0,},} \
+}
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN	8
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+	/* Saved main processor registers. */
+	unsigned long reg16;
+	unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23;
+	unsigned long reg29, reg30, reg31;
+
+	/* Saved cp0 stuff. */
+	unsigned long cp0_status;
+
+	/* Saved fpu/fpu emulator stuff. */
+	union mips_fpu_union fpu;
+
+	/* Other stuff associated with the thread. */
+	unsigned long cp0_badvaddr;	/* Last user fault */
+	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
+	unsigned long error_code;
+	unsigned long trap_no;
+#define MF_FIXADE	1		/* Fix address errors in software */
+#define MF_LOGADE	2		/* Log address errors to syslog */
+#define MF_32BIT_REGS	4		/* also implies 16/32 fprs */
+#define MF_32BIT_ADDR	8		/* 32-bit address space (o32/n32) */
+	unsigned long mflags;
+	unsigned long irix_trampoline;  /* Wheee... */
+	unsigned long irix_oldctx;
+};
+
+#define MF_ABI_MASK	(MF_32BIT_REGS | MF_32BIT_ADDR)
+#define MF_O32		(MF_32BIT_REGS | MF_32BIT_ADDR)
+#define MF_N32		MF_32BIT_ADDR
+#define MF_N64		0
+
+#define INIT_THREAD  { \
+        /* \
+         * saved main processor registers \
+         */ \
+	0, 0, 0, 0, 0, 0, 0, 0, \
+	               0, 0, 0, \
+	/* \
+	 * saved cp0 stuff \
+	 */ \
+	0, \
+	/* \
+	 * saved fpu/fpu emulator stuff \
+	 */ \
+	INIT_FPU, \
+	/* \
+	 * Other stuff associated with the process \
+	 */ \
+	0, 0, 0, 0, \
+	/* \
+	 * For now the default is to fix address errors \
+	 */ \
+	MF_FIXADE, 0, 0 \
+}
+
+struct task_struct;
+
+/* Free all resources held by a thread. */
+#define release_thread(thread) do { } while(0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define __PT_REG(reg) ((long)&((struct pt_regs *)0)->reg - sizeof(struct pt_regs))
+#define __KSTK_TOS(tsk) ((unsigned long)(tsk->thread_info) + THREAD_SIZE - 32)
+#define KSTK_EIP(tsk) (*(unsigned long *)(__KSTK_TOS(tsk) + __PT_REG(cp0_epc)))
+#define KSTK_ESP(tsk) (*(unsigned long *)(__KSTK_TOS(tsk) + __PT_REG(regs[29])))
+#define KSTK_STATUS(tsk) (*(unsigned long *)(__KSTK_TOS(tsk) + __PT_REG(cp0_status)))
+
+#define cpu_relax()	barrier()
+
+/*
+ * Return_address is a replacement for __builtin_return_address(count)
+ * which on certain architectures cannot reasonably be implemented in GCC
+ * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386).
+ * Note that __builtin_return_address(x>=1) is forbidden because GCC
+ * aborts compilation on some CPUs.  It's simply not possible to unwind
+ * some CPU's stackframes.
+ *
+ * __builtin_return_address works only for non-leaf functions.  We avoid the
+ * overhead of a function call by forcing the compiler to save the return
+ * address register on the stack.
+ */
+#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
+
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+
+extern inline void prefetch(const void *addr)
+{
+	__asm__ __volatile__(
+	"	.set	mips4		\n"
+	"	pref	%0, (%1)	\n"
+	"	.set	mips0		\n"
+	:
+	: "i" (Pref_Load), "r" (addr));
+}
+
+#endif
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
new file mode 100644
index 000000000000..d3c46d633826
--- /dev/null
+++ b/include/asm-mips/ptrace.h
@@ -0,0 +1,79 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <linux/config.h>
+
+#include <asm/isadep.h>
+
+/* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
+#define FPR_BASE	32
+#define PC		64
+#define CAUSE		65
+#define BADVADDR	66
+#define MMHI		67
+#define MMLO		68
+#define FPC_CSR		69
+#define FPC_EIR		70
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+#ifdef CONFIG_MIPS32
+	/* Pad bytes for argument save space on the stack. */
+	unsigned long pad0[6];
+#endif
+
+	/* Saved main processor registers. */
+	unsigned long regs[32];
+
+	/* Saved special registers. */
+	unsigned long cp0_status;
+	unsigned long lo;
+	unsigned long hi;
+	unsigned long cp0_badvaddr;
+	unsigned long cp0_cause;
+	unsigned long cp0_epc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+/* #define PTRACE_GETREGS		12 */
+/* #define PTRACE_SETREGS		13 */
+/* #define PTRACE_GETFPREGS		14 */
+/* #define PTRACE_SETFPREGS		15 */
+/* #define PTRACE_GETFPXREGS		18 */
+/* #define PTRACE_SETFPXREGS		19 */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#define PTRACE_GET_THREAD_AREA	25
+#define PTRACE_SET_THREAD_AREA	26
+
+#ifdef __KERNEL__
+
+#include <linux/linkage.h>
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
+
+#define instruction_pointer(regs) ((regs)->cp0_epc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern void show_regs(struct pt_regs *);
+
+extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+
+#endif
+
+#endif /* _ASM_PTRACE_H */
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
new file mode 100644
index 000000000000..da03a32c1ca7
--- /dev/null
+++ b/include/asm-mips/r4kcache.h
@@ -0,0 +1,598 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Inline assembly cache operations.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_R4KCACHE_H
+#define _ASM_R4KCACHE_H
+
+#include <asm/asm.h>
+#include <asm/cacheops.h>
+
+/*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations.  Two issues here:
+ *
+ *  - The MIPS32 and MIPS64 specs permit an implementation to directly derive
+ *    the index bits from the virtual address.  This breaks with tradition
+ *    set by the R4000.  To keep unpleassant surprises from happening we pick
+ *    an address in KSEG0 / CKSEG0.
+ *  - We need a properly sign extended address for 64-bit code.  To get away
+ *    without ifdefs we let the compiler do it by a type cast.
+ */
+#define INDEX_BASE	CKSEG0
+
+#define cache_op(op,addr)						\
+	__asm__ __volatile__(						\
+	"	.set	noreorder				\n"	\
+	"	.set	mips3\n\t				\n"	\
+	"	cache	%0, %1					\n"	\
+	"	.set	mips0					\n"	\
+	"	.set	reorder"					\
+	:								\
+	: "i" (op), "m" (*(unsigned char *)(addr)))
+
+static inline void flush_icache_line_indexed(unsigned long addr)
+{
+	cache_op(Index_Invalidate_I, addr);
+}
+
+static inline void flush_dcache_line_indexed(unsigned long addr)
+{
+	cache_op(Index_Writeback_Inv_D, addr);
+}
+
+static inline void flush_scache_line_indexed(unsigned long addr)
+{
+	cache_op(Index_Writeback_Inv_SD, addr);
+}
+
+static inline void flush_icache_line(unsigned long addr)
+{
+	cache_op(Hit_Invalidate_I, addr);
+}
+
+static inline void flush_dcache_line(unsigned long addr)
+{
+	cache_op(Hit_Writeback_Inv_D, addr);
+}
+
+static inline void invalidate_dcache_line(unsigned long addr)
+{
+	cache_op(Hit_Invalidate_D, addr);
+}
+
+static inline void invalidate_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Invalidate_SD, addr);
+}
+
+static inline void flush_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+/*
+ * The next two are for badland addresses like signal trampolines.
+ */
+static inline void protected_flush_icache_line(unsigned long addr)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".set mips3\n"
+		"1:\tcache %0,(%1)\n"
+		"2:\t.set mips0\n\t"
+		".set reorder\n\t"
+		".section\t__ex_table,\"a\"\n\t"
+		STR(PTR)"\t1b,2b\n\t"
+		".previous"
+		:
+		: "i" (Hit_Invalidate_I), "r" (addr));
+}
+
+/*
+ * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
+ * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
+ * caches.  We're talking about one cacheline unnecessarily getting invalidated
+ * here so the penaltiy isn't overly hard.
+ */
+static inline void protected_writeback_dcache_line(unsigned long addr)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".set mips3\n"
+		"1:\tcache %0,(%1)\n"
+		"2:\t.set mips0\n\t"
+		".set reorder\n\t"
+		".section\t__ex_table,\"a\"\n\t"
+		STR(PTR)"\t1b,2b\n\t"
+		".previous"
+		:
+		: "i" (Hit_Writeback_Inv_D), "r" (addr));
+}
+
+static inline void protected_writeback_scache_line(unsigned long addr)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		".set mips3\n"
+		"1:\tcache %0,(%1)\n"
+		"2:\t.set mips0\n\t"
+		".set reorder\n\t"
+		".section\t__ex_table,\"a\"\n\t"
+		STR(PTR)"\t1b,2b\n\t"
+		".previous"
+		:
+		: "i" (Hit_Writeback_Inv_SD), "r" (addr));
+}
+
+/*
+ * This one is RM7000-specific
+ */
+static inline void invalidate_tcache_page(unsigned long addr)
+{
+	cache_op(Page_Invalidate_T, addr);
+}
+
+#define cache16_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x010(%0)	\n"	\
+	"	cache %1, 0x020(%0); cache %1, 0x030(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x050(%0)	\n"	\
+	"	cache %1, 0x060(%0); cache %1, 0x070(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x090(%0)	\n"	\
+	"	cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)	\n"	\
+	"	cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x110(%0)	\n"	\
+	"	cache %1, 0x120(%0); cache %1, 0x130(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x150(%0)	\n"	\
+	"	cache %1, 0x160(%0); cache %1, 0x170(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x190(%0)	\n"	\
+	"	cache %1, 0x1a0(%0); cache %1, 0x1b0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1d0(%0)	\n"	\
+	"	cache %1, 0x1e0(%0); cache %1, 0x1f0(%0)	\n"	\
+	"	.set mips0					\n"	\
+	"	.set reorder					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+static inline void blast_dcache16(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.dcache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+	unsigned long ws_end = current_cpu_data.dcache.ways << 
+	                       current_cpu_data.dcache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200)
+			cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
+}
+
+static inline void blast_dcache16_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+
+	do {
+		cache16_unroll32(start,Hit_Writeback_Inv_D);
+		start += 0x200;
+	} while (start < end);
+}
+
+static inline void blast_dcache16_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+	unsigned long ws_end = current_cpu_data.dcache.ways <<
+	                       current_cpu_data.dcache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200) 
+			cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
+}
+
+static inline void blast_icache16(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.icache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200) 
+			cache16_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_icache16_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+
+	do {
+		cache16_unroll32(start,Hit_Invalidate_I);
+		start += 0x200;
+	} while (start < end);
+}
+
+static inline void blast_icache16_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200) 
+			cache16_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_scache16(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.scache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways << 
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200)
+			cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+static inline void blast_scache16_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = page + PAGE_SIZE;
+
+	do {
+		cache16_unroll32(start,Hit_Writeback_Inv_SD);
+		start += 0x200;
+	} while (start < end);
+}
+
+static inline void blast_scache16_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways <<
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x200) 
+			cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+#define cache32_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x020(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x060(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0a0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x120(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x160(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1a0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1e0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x220(%0)	\n"	\
+	"	cache %1, 0x240(%0); cache %1, 0x260(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2a0(%0)	\n"	\
+	"	cache %1, 0x2c0(%0); cache %1, 0x2e0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x320(%0)	\n"	\
+	"	cache %1, 0x340(%0); cache %1, 0x360(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3a0(%0)	\n"	\
+	"	cache %1, 0x3c0(%0); cache %1, 0x3e0(%0)	\n"	\
+	"	.set mips0					\n"	\
+	"	.set reorder					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+static inline void blast_dcache32(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.dcache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+	unsigned long ws_end = current_cpu_data.dcache.ways <<
+	                       current_cpu_data.dcache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x400) 
+			cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
+}
+
+static inline void blast_dcache32_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+
+	do {
+		cache32_unroll32(start,Hit_Writeback_Inv_D);
+		start += 0x400;
+	} while (start < end);
+}
+
+static inline void blast_dcache32_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+	unsigned long ws_end = current_cpu_data.dcache.ways <<
+	                       current_cpu_data.dcache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x400) 
+			cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
+}
+
+static inline void blast_icache32(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.icache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x400) 
+			cache32_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_icache32_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+
+	do {
+		cache32_unroll32(start,Hit_Invalidate_I);
+		start += 0x400;
+	} while (start < end);
+}
+
+static inline void blast_icache32_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc)
+		for (addr = start; addr < end; addr += 0x400) 
+			cache32_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_scache32(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.scache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways << 
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x400)
+			cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+static inline void blast_scache32_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = page + PAGE_SIZE;
+
+	do {
+		cache32_unroll32(start,Hit_Writeback_Inv_SD);
+		start += 0x400;
+	} while (start < end);
+}
+
+static inline void blast_scache32_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways <<
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x400) 
+			cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+#define cache64_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x040(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0c0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x140(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1c0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x240(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2c0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x340(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3c0(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x440(%0)	\n"	\
+	"	cache %1, 0x480(%0); cache %1, 0x4c0(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x540(%0)	\n"	\
+	"	cache %1, 0x580(%0); cache %1, 0x5c0(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x640(%0)	\n"	\
+	"	cache %1, 0x680(%0); cache %1, 0x6c0(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x740(%0)	\n"	\
+	"	cache %1, 0x780(%0); cache %1, 0x7c0(%0)	\n"	\
+	"	.set mips0					\n"	\
+	"	.set reorder					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+static inline void blast_icache64(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.icache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x800) 
+			cache64_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_icache64_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+
+	do {
+		cache64_unroll32(start,Hit_Invalidate_I);
+		start += 0x800;
+	} while (start < end);
+}
+
+static inline void blast_icache64_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
+	unsigned long ws_end = current_cpu_data.icache.ways <<
+	                       current_cpu_data.icache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc)
+		for (addr = start; addr < end; addr += 0x800) 
+			cache64_unroll32(addr|ws,Index_Invalidate_I);
+}
+
+static inline void blast_scache64(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.scache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways << 
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x800)
+			cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+static inline void blast_scache64_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = page + PAGE_SIZE;
+
+	do {
+		cache64_unroll32(start,Hit_Writeback_Inv_SD);
+		start += 0x800;
+	} while (start < end);
+}
+
+static inline void blast_scache64_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways <<
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x800) 
+			cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+#define cache128_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x080(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x180(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x280(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x380(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x480(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x580(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x680(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x780(%0)	\n"	\
+	"	cache %1, 0x800(%0); cache %1, 0x880(%0)	\n"	\
+	"	cache %1, 0x900(%0); cache %1, 0x980(%0)	\n"	\
+	"	cache %1, 0xa00(%0); cache %1, 0xa80(%0)	\n"	\
+	"	cache %1, 0xb00(%0); cache %1, 0xb80(%0)	\n"	\
+	"	cache %1, 0xc00(%0); cache %1, 0xc80(%0)	\n"	\
+	"	cache %1, 0xd00(%0); cache %1, 0xd80(%0)	\n"	\
+	"	cache %1, 0xe00(%0); cache %1, 0xe80(%0)	\n"	\
+	"	cache %1, 0xf00(%0); cache %1, 0xf80(%0)	\n"	\
+	"	.set mips0					\n"	\
+	"	.set reorder					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+static inline void blast_scache128(void)
+{
+	unsigned long start = INDEX_BASE;
+	unsigned long end = start + current_cpu_data.scache.waysize;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways << 
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x1000)
+			cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+static inline void blast_scache128_page(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = page + PAGE_SIZE;
+
+	do {
+		cache128_unroll32(start,Hit_Writeback_Inv_SD);
+		start += 0x1000;
+	} while (start < end);
+}
+
+static inline void blast_scache128_page_indexed(unsigned long page)
+{
+	unsigned long start = page;
+	unsigned long end = start + PAGE_SIZE;
+	unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
+	unsigned long ws_end = current_cpu_data.scache.ways <<
+	                       current_cpu_data.scache.waybit;
+	unsigned long ws, addr;
+
+	for (ws = 0; ws < ws_end; ws += ws_inc) 
+		for (addr = start; addr < end; addr += 0x1000) 
+			cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
+}
+
+#endif /* _ASM_R4KCACHE_H */
diff --git a/include/asm-mips/reboot.h b/include/asm-mips/reboot.h
new file mode 100644
index 000000000000..2f10ebcbe141
--- /dev/null
+++ b/include/asm-mips/reboot.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_REBOOT_H
+#define _ASM_REBOOT_H
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+extern void (*_machine_power_off)(void);
+
+#endif /* _ASM_REBOOT_H */
diff --git a/include/asm-mips/reg.h b/include/asm-mips/reg.h
new file mode 100644
index 000000000000..7b33bbca9585
--- /dev/null
+++ b/include/asm-mips/reg.h
@@ -0,0 +1,129 @@
+/*
+ * Various register offset definitions for debuggers, core file
+ * examiners and whatnot.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
+ */
+#ifndef __ASM_MIPS_REG_H
+#define __ASM_MIPS_REG_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_MIPS32) || defined(WANT_COMPAT_REG_H)
+
+#define EF_R0			6
+#define EF_R1			7
+#define EF_R2			8
+#define EF_R3			9
+#define EF_R4			10
+#define EF_R5			11
+#define EF_R6			12
+#define EF_R7			13
+#define EF_R8			14
+#define EF_R9			15
+#define EF_R10			16
+#define EF_R11			17
+#define EF_R12			18
+#define EF_R13			19
+#define EF_R14			20
+#define EF_R15			21
+#define EF_R16			22
+#define EF_R17			23
+#define EF_R18			24
+#define EF_R19			25
+#define EF_R20			26
+#define EF_R21			27
+#define EF_R22			28
+#define EF_R23			29
+#define EF_R24			30
+#define EF_R25			31
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			32
+#define EF_R27			33
+
+#define EF_R28			34
+#define EF_R29			35
+#define EF_R30			36
+#define EF_R31			37
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			38
+#define EF_HI			39
+
+#define EF_CP0_EPC		40
+#define EF_CP0_BADVADDR		41
+#define EF_CP0_STATUS		42
+#define EF_CP0_CAUSE		43
+#define EF_UNUSED0		44
+
+#define EF_SIZE			180
+
+#endif
+
+#if CONFIG_MIPS64
+
+#define EF_R0			 0
+#define EF_R1			 1
+#define EF_R2			 2
+#define EF_R3			 3
+#define EF_R4			 4
+#define EF_R5			 5
+#define EF_R6			 6
+#define EF_R7			 7
+#define EF_R8			 8
+#define EF_R9			 9
+#define EF_R10			10
+#define EF_R11			11
+#define EF_R12			12
+#define EF_R13			13
+#define EF_R14			14
+#define EF_R15			15
+#define EF_R16			16
+#define EF_R17			17
+#define EF_R18			18
+#define EF_R19			19
+#define EF_R20			20
+#define EF_R21			21
+#define EF_R22			22
+#define EF_R23			23
+#define EF_R24			24
+#define EF_R25			25
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			26
+#define EF_R27			27
+
+
+#define EF_R28			28
+#define EF_R29			29
+#define EF_R30			30
+#define EF_R31			31
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			32
+#define EF_HI			33
+
+#define EF_CP0_EPC		34
+#define EF_CP0_BADVADDR		35
+#define EF_CP0_STATUS		36
+#define EF_CP0_CAUSE		37
+
+#define EF_SIZE			304	/* size in bytes */
+
+#endif /* CONFIG_MIPS64 */
+
+#endif /* __ASM_MIPS_REG_H */
diff --git a/include/asm-mips/regdef.h b/include/asm-mips/regdef.h
new file mode 100644
index 000000000000..7c8ecb6b9c40
--- /dev/null
+++ b/include/asm-mips/regdef.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero    $0      /* wired zero */
+#define AT      $1      /* assembler temp  - uppercase because of ".set at" */
+#define v0      $2      /* return value */
+#define v1      $3
+#define a0      $4      /* argument registers */
+#define a1      $5
+#define a2      $6
+#define a3      $7
+#define t0      $8      /* caller saved */
+#define t1      $9
+#define t2      $10
+#define t3      $11
+#define t4      $12
+#define t5      $13
+#define t6      $14
+#define t7      $15
+#define s0      $16     /* callee saved */
+#define s1      $17
+#define s2      $18
+#define s3      $19
+#define s4      $20
+#define s5      $21
+#define s6      $22
+#define s7      $23
+#define t8      $24     /* caller saved */
+#define t9      $25
+#define jp      $25     /* PIC jump register */
+#define k0      $26     /* kernel scratch */
+#define k1      $27
+#define gp      $28     /* global pointer */
+#define sp      $29     /* stack pointer */
+#define fp      $30     /* frame pointer */
+#define s8	$30	/* same like fp! */
+#define ra      $31     /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero	$0	/* wired zero */
+#define AT	$at	/* assembler temp - uppercase because of ".set at" */
+#define v0	$2	/* return value - caller saved */
+#define v1	$3
+#define a0	$4	/* argument registers */
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define a4	$8	/* arg reg 64 bit; caller saved in 32 bit */
+#define ta0	$8
+#define a5	$9
+#define ta1	$9
+#define a6	$10
+#define ta2	$10
+#define a7	$11
+#define ta3	$11
+#define t0	$12	/* caller saved */
+#define t1	$13
+#define t2	$14
+#define t3	$15
+#define s0	$16	/* callee saved */
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24	/* caller saved */
+#define t9	$25	/* callee address for PIC/temp */
+#define jp	$25	/* PIC jump register */
+#define k0	$26	/* kernel temporary */
+#define k1	$27
+#define gp	$28	/* global pointer - caller saved for PIC */
+#define sp	$29	/* stack pointer */
+#define fp	$30	/* frame pointer */
+#define s8	$30	/* callee saved */
+#define ra	$31	/* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/include/asm-mips/resource.h b/include/asm-mips/resource.h
new file mode 100644
index 000000000000..fd3c6d17a5f6
--- /dev/null
+++ b/include/asm-mips/resource.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+#include <linux/config.h>
+
+/*
+ * These five resource limit IDs have a MIPS/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		5	/* max number of open files */
+#define RLIMIT_AS		6	/* address space limit */
+#define RLIMIT_RSS		7	/* max resident set size */
+#define RLIMIT_NPROC		8	/* max number of processes */
+#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway,
+ * but we keep the old value on MIPS32,
+ * for compatibility:
+ */
+#ifdef CONFIG_MIPS32
+# define RLIM_INFINITY		0x7fffffffUL
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
diff --git a/include/asm-mips/riscos-syscall.h b/include/asm-mips/riscos-syscall.h
new file mode 100644
index 000000000000..4d8eb15461eb
--- /dev/null
+++ b/include/asm-mips/riscos-syscall.h
@@ -0,0 +1,979 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_RISCOS_SYSCALL_H
+#define _ASM_RISCOS_SYSCALL_H
+
+/*
+ * The syscalls 0 - 3999 are reserved for a down to the root syscall
+ * compatibility with RISC/os and IRIX.  We'll see how to deal with the
+ * various "real" BSD variants like Ultrix, NetBSD ...
+ */
+
+/*
+ * SVR4 syscalls are in the range from 1 to 999
+ */
+#define __NR_SVR4			0
+#define __NR_SVR4_syscall		(__NR_SVR4 +   0)
+#define __NR_SVR4_exit			(__NR_SVR4 +   1)
+#define __NR_SVR4_fork			(__NR_SVR4 +   2)
+#define __NR_SVR4_read			(__NR_SVR4 +   3)
+#define __NR_SVR4_write			(__NR_SVR4 +   4)
+#define __NR_SVR4_open			(__NR_SVR4 +   5)
+#define __NR_SVR4_close			(__NR_SVR4 +   6)
+#define __NR_SVR4_wait			(__NR_SVR4 +   7)
+#define __NR_SVR4_creat			(__NR_SVR4 +   8)
+#define __NR_SVR4_link			(__NR_SVR4 +   9)
+#define __NR_SVR4_unlink		(__NR_SVR4 +  10)
+#define __NR_SVR4_exec			(__NR_SVR4 +  11)
+#define __NR_SVR4_chdir			(__NR_SVR4 +  12)
+#define __NR_SVR4_gtime			(__NR_SVR4 +  13)
+#define __NR_SVR4_mknod			(__NR_SVR4 +  14)
+#define __NR_SVR4_chmod			(__NR_SVR4 +  15)
+#define __NR_SVR4_chown			(__NR_SVR4 +  16)
+#define __NR_SVR4_sbreak		(__NR_SVR4 +  17)
+#define __NR_SVR4_stat			(__NR_SVR4 +  18)
+#define __NR_SVR4_lseek			(__NR_SVR4 +  19)
+#define __NR_SVR4_getpid		(__NR_SVR4 +  20)
+#define __NR_SVR4_mount			(__NR_SVR4 +  21)
+#define __NR_SVR4_umount		(__NR_SVR4 +  22)
+#define __NR_SVR4_setuid		(__NR_SVR4 +  23)
+#define __NR_SVR4_getuid		(__NR_SVR4 +  24)
+#define __NR_SVR4_stime			(__NR_SVR4 +  25)
+#define __NR_SVR4_ptrace		(__NR_SVR4 +  26)
+#define __NR_SVR4_alarm			(__NR_SVR4 +  27)
+#define __NR_SVR4_fstat			(__NR_SVR4 +  28)
+#define __NR_SVR4_pause			(__NR_SVR4 +  29)
+#define __NR_SVR4_utime			(__NR_SVR4 +  30)
+#define __NR_SVR4_stty			(__NR_SVR4 +  31)
+#define __NR_SVR4_gtty			(__NR_SVR4 +  32)
+#define __NR_SVR4_access		(__NR_SVR4 +  33)
+#define __NR_SVR4_nice			(__NR_SVR4 +  34)
+#define __NR_SVR4_statfs		(__NR_SVR4 +  35)
+#define __NR_SVR4_sync			(__NR_SVR4 +  36)
+#define __NR_SVR4_kill			(__NR_SVR4 +  37)
+#define __NR_SVR4_fstatfs		(__NR_SVR4 +  38)
+#define __NR_SVR4_setpgrp		(__NR_SVR4 +  39)
+#define __NR_SVR4_cxenix		(__NR_SVR4 +  40)
+#define __NR_SVR4_dup			(__NR_SVR4 +  41)
+#define __NR_SVR4_pipe			(__NR_SVR4 +  42)
+#define __NR_SVR4_times			(__NR_SVR4 +  43)
+#define __NR_SVR4_profil		(__NR_SVR4 +  44)
+#define __NR_SVR4_plock			(__NR_SVR4 +  45)
+#define __NR_SVR4_setgid		(__NR_SVR4 +  46)
+#define __NR_SVR4_getgid		(__NR_SVR4 +  47)
+#define __NR_SVR4_sig			(__NR_SVR4 +  48)
+#define __NR_SVR4_msgsys		(__NR_SVR4 +  49)
+#define __NR_SVR4_sysmips		(__NR_SVR4 +  50)
+#define __NR_SVR4_sysacct		(__NR_SVR4 +  51)
+#define __NR_SVR4_shmsys		(__NR_SVR4 +  52)
+#define __NR_SVR4_semsys		(__NR_SVR4 +  53)
+#define __NR_SVR4_ioctl			(__NR_SVR4 +  54)
+#define __NR_SVR4_uadmin		(__NR_SVR4 +  55)
+#define __NR_SVR4_exch 			(__NR_SVR4 +  56)
+#define __NR_SVR4_utssys		(__NR_SVR4 +  57)
+#define __NR_SVR4_fsync			(__NR_SVR4 +  58)
+#define __NR_SVR4_exece			(__NR_SVR4 +  59)
+#define __NR_SVR4_umask			(__NR_SVR4 +  60)
+#define __NR_SVR4_chroot		(__NR_SVR4 +  61)
+#define __NR_SVR4_fcntl			(__NR_SVR4 +  62)
+#define __NR_SVR4_ulimit		(__NR_SVR4 +  63)
+#define __NR_SVR4_reserved1		(__NR_SVR4 +  64)
+#define __NR_SVR4_reserved2		(__NR_SVR4 +  65)
+#define __NR_SVR4_reserved3		(__NR_SVR4 +  66)
+#define __NR_SVR4_reserved4		(__NR_SVR4 +  67)
+#define __NR_SVR4_reserved5		(__NR_SVR4 +  68)
+#define __NR_SVR4_reserved6		(__NR_SVR4 +  69)
+#define __NR_SVR4_advfs			(__NR_SVR4 +  70)
+#define __NR_SVR4_unadvfs		(__NR_SVR4 +  71)
+#define __NR_SVR4_unused1		(__NR_SVR4 +  72)
+#define __NR_SVR4_unused2		(__NR_SVR4 +  73)
+#define __NR_SVR4_rfstart		(__NR_SVR4 +  74)
+#define __NR_SVR4_unused3		(__NR_SVR4 +  75)
+#define __NR_SVR4_rdebug		(__NR_SVR4 +  76)
+#define __NR_SVR4_rfstop		(__NR_SVR4 +  77)
+#define __NR_SVR4_rfsys			(__NR_SVR4 +  78)
+#define __NR_SVR4_rmdir			(__NR_SVR4 +  79)
+#define __NR_SVR4_mkdir			(__NR_SVR4 +  80)
+#define __NR_SVR4_getdents		(__NR_SVR4 +  81)
+#define __NR_SVR4_libattach		(__NR_SVR4 +  82)
+#define __NR_SVR4_libdetach		(__NR_SVR4 +  83)
+#define __NR_SVR4_sysfs			(__NR_SVR4 +  84)
+#define __NR_SVR4_getmsg		(__NR_SVR4 +  85)
+#define __NR_SVR4_putmsg		(__NR_SVR4 +  86)
+#define __NR_SVR4_poll			(__NR_SVR4 +  87)
+#define __NR_SVR4_lstat			(__NR_SVR4 +  88)
+#define __NR_SVR4_symlink		(__NR_SVR4 +  89)
+#define __NR_SVR4_readlink		(__NR_SVR4 +  90)
+#define __NR_SVR4_setgroups		(__NR_SVR4 +  91)
+#define __NR_SVR4_getgroups		(__NR_SVR4 +  92)
+#define __NR_SVR4_fchmod		(__NR_SVR4 +  93)
+#define __NR_SVR4_fchown		(__NR_SVR4 +  94)
+#define __NR_SVR4_sigprocmask		(__NR_SVR4 +  95)
+#define __NR_SVR4_sigsuspend		(__NR_SVR4 +  96)
+#define __NR_SVR4_sigaltstack		(__NR_SVR4 +  97)
+#define __NR_SVR4_sigaction		(__NR_SVR4 +  98)
+#define __NR_SVR4_sigpending		(__NR_SVR4 +  99)
+#define __NR_SVR4_setcontext		(__NR_SVR4 + 100)
+#define __NR_SVR4_evsys			(__NR_SVR4 + 101)
+#define __NR_SVR4_evtrapret		(__NR_SVR4 + 102)
+#define __NR_SVR4_statvfs		(__NR_SVR4 + 103)
+#define __NR_SVR4_fstatvfs		(__NR_SVR4 + 104)
+#define __NR_SVR4_reserved7		(__NR_SVR4 + 105)
+#define __NR_SVR4_nfssys		(__NR_SVR4 + 106)
+#define __NR_SVR4_waitid		(__NR_SVR4 + 107)
+#define __NR_SVR4_sigsendset		(__NR_SVR4 + 108)
+#define __NR_SVR4_hrtsys		(__NR_SVR4 + 109)
+#define __NR_SVR4_acancel		(__NR_SVR4 + 110)
+#define __NR_SVR4_async			(__NR_SVR4 + 111)
+#define __NR_SVR4_priocntlset		(__NR_SVR4 + 112)
+#define __NR_SVR4_pathconf		(__NR_SVR4 + 113)
+#define __NR_SVR4_mincore		(__NR_SVR4 + 114)
+#define __NR_SVR4_mmap			(__NR_SVR4 + 115)
+#define __NR_SVR4_mprotect		(__NR_SVR4 + 116)
+#define __NR_SVR4_munmap		(__NR_SVR4 + 117)
+#define __NR_SVR4_fpathconf		(__NR_SVR4 + 118)
+#define __NR_SVR4_vfork			(__NR_SVR4 + 119)
+#define __NR_SVR4_fchdir		(__NR_SVR4 + 120)
+#define __NR_SVR4_readv			(__NR_SVR4 + 121)
+#define __NR_SVR4_writev		(__NR_SVR4 + 122)
+#define __NR_SVR4_xstat			(__NR_SVR4 + 123)
+#define __NR_SVR4_lxstat		(__NR_SVR4 + 124)
+#define __NR_SVR4_fxstat		(__NR_SVR4 + 125)
+#define __NR_SVR4_xmknod		(__NR_SVR4 + 126)
+#define __NR_SVR4_clocal		(__NR_SVR4 + 127)
+#define __NR_SVR4_setrlimit		(__NR_SVR4 + 128)
+#define __NR_SVR4_getrlimit		(__NR_SVR4 + 129)
+#define __NR_SVR4_lchown		(__NR_SVR4 + 130)
+#define __NR_SVR4_memcntl		(__NR_SVR4 + 131)
+#define __NR_SVR4_getpmsg		(__NR_SVR4 + 132)
+#define __NR_SVR4_putpmsg		(__NR_SVR4 + 133)
+#define __NR_SVR4_rename		(__NR_SVR4 + 134)
+#define __NR_SVR4_nuname		(__NR_SVR4 + 135)
+#define __NR_SVR4_setegid		(__NR_SVR4 + 136)
+#define __NR_SVR4_sysconf		(__NR_SVR4 + 137)
+#define __NR_SVR4_adjtime		(__NR_SVR4 + 138)
+#define __NR_SVR4_sysinfo		(__NR_SVR4 + 139)
+#define __NR_SVR4_reserved8		(__NR_SVR4 + 140)
+#define __NR_SVR4_seteuid		(__NR_SVR4 + 141)
+#define __NR_SVR4_PYRAMID_statis	(__NR_SVR4 + 142)
+#define __NR_SVR4_PYRAMID_tuning	(__NR_SVR4 + 143)
+#define __NR_SVR4_PYRAMID_forcerr	(__NR_SVR4 + 144)
+#define __NR_SVR4_PYRAMID_mpcntl	(__NR_SVR4 + 145)
+#define __NR_SVR4_reserved9		(__NR_SVR4 + 146)
+#define __NR_SVR4_reserved10		(__NR_SVR4 + 147)
+#define __NR_SVR4_reserved11		(__NR_SVR4 + 148)
+#define __NR_SVR4_reserved12		(__NR_SVR4 + 149)
+#define __NR_SVR4_reserved13		(__NR_SVR4 + 150)
+#define __NR_SVR4_reserved14		(__NR_SVR4 + 151)
+#define __NR_SVR4_reserved15		(__NR_SVR4 + 152)
+#define __NR_SVR4_reserved16		(__NR_SVR4 + 153)
+#define __NR_SVR4_reserved17		(__NR_SVR4 + 154)
+#define __NR_SVR4_reserved18		(__NR_SVR4 + 155)
+#define __NR_SVR4_reserved19		(__NR_SVR4 + 156)
+#define __NR_SVR4_reserved20		(__NR_SVR4 + 157)
+#define __NR_SVR4_reserved21		(__NR_SVR4 + 158)
+#define __NR_SVR4_reserved22		(__NR_SVR4 + 159)
+#define __NR_SVR4_reserved23		(__NR_SVR4 + 160)
+#define __NR_SVR4_reserved24		(__NR_SVR4 + 161)
+#define __NR_SVR4_reserved25		(__NR_SVR4 + 162)
+#define __NR_SVR4_reserved26		(__NR_SVR4 + 163)
+#define __NR_SVR4_reserved27		(__NR_SVR4 + 164)
+#define __NR_SVR4_reserved28		(__NR_SVR4 + 165)
+#define __NR_SVR4_reserved29		(__NR_SVR4 + 166)
+#define __NR_SVR4_reserved30		(__NR_SVR4 + 167)
+#define __NR_SVR4_reserved31		(__NR_SVR4 + 168)
+#define __NR_SVR4_reserved32		(__NR_SVR4 + 169)
+#define __NR_SVR4_reserved33		(__NR_SVR4 + 170)
+#define __NR_SVR4_reserved34		(__NR_SVR4 + 171)
+#define __NR_SVR4_reserved35		(__NR_SVR4 + 172)
+#define __NR_SVR4_reserved36		(__NR_SVR4 + 173)
+#define __NR_SVR4_reserved37		(__NR_SVR4 + 174)
+#define __NR_SVR4_reserved38		(__NR_SVR4 + 175)
+#define __NR_SVR4_reserved39		(__NR_SVR4 + 176)
+#define __NR_SVR4_reserved40		(__NR_SVR4 + 177)
+#define __NR_SVR4_reserved41		(__NR_SVR4 + 178)
+#define __NR_SVR4_reserved42		(__NR_SVR4 + 179)
+#define __NR_SVR4_reserved43		(__NR_SVR4 + 180)
+#define __NR_SVR4_reserved44		(__NR_SVR4 + 181)
+#define __NR_SVR4_reserved45		(__NR_SVR4 + 182)
+#define __NR_SVR4_reserved46		(__NR_SVR4 + 183)
+#define __NR_SVR4_reserved47		(__NR_SVR4 + 184)
+#define __NR_SVR4_reserved48		(__NR_SVR4 + 185)
+#define __NR_SVR4_reserved49		(__NR_SVR4 + 186)
+#define __NR_SVR4_reserved50		(__NR_SVR4 + 187)
+#define __NR_SVR4_reserved51		(__NR_SVR4 + 188)
+#define __NR_SVR4_reserved52		(__NR_SVR4 + 189)
+#define __NR_SVR4_reserved53		(__NR_SVR4 + 190)
+#define __NR_SVR4_reserved54		(__NR_SVR4 + 191)
+#define __NR_SVR4_reserved55		(__NR_SVR4 + 192)
+#define __NR_SVR4_reserved56		(__NR_SVR4 + 193)
+#define __NR_SVR4_reserved57		(__NR_SVR4 + 194)
+#define __NR_SVR4_reserved58		(__NR_SVR4 + 195)
+#define __NR_SVR4_reserved59		(__NR_SVR4 + 196)
+#define __NR_SVR4_reserved60		(__NR_SVR4 + 197)
+#define __NR_SVR4_reserved61		(__NR_SVR4 + 198)
+#define __NR_SVR4_reserved62		(__NR_SVR4 + 199)
+#define __NR_SVR4_reserved63		(__NR_SVR4 + 200)
+#define __NR_SVR4_aread			(__NR_SVR4 + 201)
+#define __NR_SVR4_awrite		(__NR_SVR4 + 202)
+#define __NR_SVR4_listio		(__NR_SVR4 + 203)
+#define __NR_SVR4_mips_acancel		(__NR_SVR4 + 204)
+#define __NR_SVR4_astatus		(__NR_SVR4 + 205)
+#define __NR_SVR4_await			(__NR_SVR4 + 206)
+#define __NR_SVR4_areadv		(__NR_SVR4 + 207)
+#define __NR_SVR4_awritev		(__NR_SVR4 + 208)
+#define __NR_SVR4_MIPS_reserved1	(__NR_SVR4 + 209)
+#define __NR_SVR4_MIPS_reserved2	(__NR_SVR4 + 210)
+#define __NR_SVR4_MIPS_reserved3	(__NR_SVR4 + 211)
+#define __NR_SVR4_MIPS_reserved4	(__NR_SVR4 + 212)
+#define __NR_SVR4_MIPS_reserved5	(__NR_SVR4 + 213)
+#define __NR_SVR4_MIPS_reserved6	(__NR_SVR4 + 214)
+#define __NR_SVR4_MIPS_reserved7	(__NR_SVR4 + 215)
+#define __NR_SVR4_MIPS_reserved8	(__NR_SVR4 + 216)
+#define __NR_SVR4_MIPS_reserved9	(__NR_SVR4 + 217)
+#define __NR_SVR4_MIPS_reserved10	(__NR_SVR4 + 218)
+#define __NR_SVR4_MIPS_reserved11	(__NR_SVR4 + 219)
+#define __NR_SVR4_MIPS_reserved12	(__NR_SVR4 + 220)
+#define __NR_SVR4_CDC_reserved1		(__NR_SVR4 + 221)
+#define __NR_SVR4_CDC_reserved2		(__NR_SVR4 + 222)
+#define __NR_SVR4_CDC_reserved3		(__NR_SVR4 + 223)
+#define __NR_SVR4_CDC_reserved4		(__NR_SVR4 + 224)
+#define __NR_SVR4_CDC_reserved5		(__NR_SVR4 + 225)
+#define __NR_SVR4_CDC_reserved6		(__NR_SVR4 + 226)
+#define __NR_SVR4_CDC_reserved7		(__NR_SVR4 + 227)
+#define __NR_SVR4_CDC_reserved8		(__NR_SVR4 + 228)
+#define __NR_SVR4_CDC_reserved9		(__NR_SVR4 + 229)
+#define __NR_SVR4_CDC_reserved10	(__NR_SVR4 + 230)
+#define __NR_SVR4_CDC_reserved11	(__NR_SVR4 + 231)
+#define __NR_SVR4_CDC_reserved12	(__NR_SVR4 + 232)
+#define __NR_SVR4_CDC_reserved13	(__NR_SVR4 + 233)
+#define __NR_SVR4_CDC_reserved14	(__NR_SVR4 + 234)
+#define __NR_SVR4_CDC_reserved15	(__NR_SVR4 + 235)
+#define __NR_SVR4_CDC_reserved16	(__NR_SVR4 + 236)
+#define __NR_SVR4_CDC_reserved17	(__NR_SVR4 + 237)
+#define __NR_SVR4_CDC_reserved18	(__NR_SVR4 + 238)
+#define __NR_SVR4_CDC_reserved19	(__NR_SVR4 + 239)
+#define __NR_SVR4_CDC_reserved20	(__NR_SVR4 + 240)
+
+/*
+ * SYS V syscalls are in the range from 1000 to 1999
+ */
+#define __NR_SYSV			1000
+#define __NR_SYSV_syscall		(__NR_SYSV +   0)
+#define __NR_SYSV_exit			(__NR_SYSV +   1)
+#define __NR_SYSV_fork			(__NR_SYSV +   2)
+#define __NR_SYSV_read			(__NR_SYSV +   3)
+#define __NR_SYSV_write			(__NR_SYSV +   4)
+#define __NR_SYSV_open			(__NR_SYSV +   5)
+#define __NR_SYSV_close			(__NR_SYSV +   6)
+#define __NR_SYSV_wait			(__NR_SYSV +   7)
+#define __NR_SYSV_creat			(__NR_SYSV +   8)
+#define __NR_SYSV_link			(__NR_SYSV +   9)
+#define __NR_SYSV_unlink		(__NR_SYSV +  10)
+#define __NR_SYSV_execv			(__NR_SYSV +  11)
+#define __NR_SYSV_chdir			(__NR_SYSV +  12)
+#define __NR_SYSV_time			(__NR_SYSV +  13)
+#define __NR_SYSV_mknod			(__NR_SYSV +  14)
+#define __NR_SYSV_chmod			(__NR_SYSV +  15)
+#define __NR_SYSV_chown			(__NR_SYSV +  16)
+#define __NR_SYSV_brk			(__NR_SYSV +  17)
+#define __NR_SYSV_stat			(__NR_SYSV +  18)
+#define __NR_SYSV_lseek			(__NR_SYSV +  19)
+#define __NR_SYSV_getpid		(__NR_SYSV +  20)
+#define __NR_SYSV_mount			(__NR_SYSV +  21)
+#define __NR_SYSV_umount		(__NR_SYSV +  22)
+#define __NR_SYSV_setuid		(__NR_SYSV +  23)
+#define __NR_SYSV_getuid		(__NR_SYSV +  24)
+#define __NR_SYSV_stime			(__NR_SYSV +  25)
+#define __NR_SYSV_ptrace		(__NR_SYSV +  26)
+#define __NR_SYSV_alarm			(__NR_SYSV +  27)
+#define __NR_SYSV_fstat			(__NR_SYSV +  28)
+#define __NR_SYSV_pause			(__NR_SYSV +  29)
+#define __NR_SYSV_utime			(__NR_SYSV +  30)
+#define __NR_SYSV_stty			(__NR_SYSV +  31)
+#define __NR_SYSV_gtty			(__NR_SYSV +  32)
+#define __NR_SYSV_access		(__NR_SYSV +  33)
+#define __NR_SYSV_nice			(__NR_SYSV +  34)
+#define __NR_SYSV_statfs		(__NR_SYSV +  35)
+#define __NR_SYSV_sync			(__NR_SYSV +  36)
+#define __NR_SYSV_kill			(__NR_SYSV +  37)
+#define __NR_SYSV_fstatfs		(__NR_SYSV +  38)
+#define __NR_SYSV_setpgrp		(__NR_SYSV +  39)
+#define __NR_SYSV_syssgi		(__NR_SYSV +  40)
+#define __NR_SYSV_dup			(__NR_SYSV +  41)
+#define __NR_SYSV_pipe			(__NR_SYSV +  42)
+#define __NR_SYSV_times			(__NR_SYSV +  43)
+#define __NR_SYSV_profil		(__NR_SYSV +  44)
+#define __NR_SYSV_plock			(__NR_SYSV +  45)
+#define __NR_SYSV_setgid		(__NR_SYSV +  46)
+#define __NR_SYSV_getgid		(__NR_SYSV +  47)
+#define __NR_SYSV_sig			(__NR_SYSV +  48)
+#define __NR_SYSV_msgsys		(__NR_SYSV +  49)
+#define __NR_SYSV_sysmips		(__NR_SYSV +  50)
+#define __NR_SYSV_acct			(__NR_SYSV +  51)
+#define __NR_SYSV_shmsys		(__NR_SYSV +  52)
+#define __NR_SYSV_semsys		(__NR_SYSV +  53)
+#define __NR_SYSV_ioctl			(__NR_SYSV +  54)
+#define __NR_SYSV_uadmin		(__NR_SYSV +  55)
+#define __NR_SYSV_sysmp			(__NR_SYSV +  56)
+#define __NR_SYSV_utssys		(__NR_SYSV +  57)
+#define __NR_SYSV_USG_reserved1		(__NR_SYSV +  58)
+#define __NR_SYSV_execve		(__NR_SYSV +  59)
+#define __NR_SYSV_umask			(__NR_SYSV +  60)
+#define __NR_SYSV_chroot		(__NR_SYSV +  61)
+#define __NR_SYSV_fcntl			(__NR_SYSV +  62)
+#define __NR_SYSV_ulimit		(__NR_SYSV +  63)
+#define __NR_SYSV_SAFARI4_reserved1	(__NR_SYSV +  64)
+#define __NR_SYSV_SAFARI4_reserved2	(__NR_SYSV +  65)
+#define __NR_SYSV_SAFARI4_reserved3	(__NR_SYSV +  66)
+#define __NR_SYSV_SAFARI4_reserved4	(__NR_SYSV +  67)
+#define __NR_SYSV_SAFARI4_reserved5	(__NR_SYSV +  68)
+#define __NR_SYSV_SAFARI4_reserved6	(__NR_SYSV +  69)
+#define __NR_SYSV_advfs			(__NR_SYSV +  70)
+#define __NR_SYSV_unadvfs		(__NR_SYSV +  71)
+#define __NR_SYSV_rmount		(__NR_SYSV +  72)
+#define __NR_SYSV_rumount		(__NR_SYSV +  73)
+#define __NR_SYSV_rfstart		(__NR_SYSV +  74)
+#define __NR_SYSV_getrlimit64		(__NR_SYSV +  75)
+#define __NR_SYSV_setrlimit64		(__NR_SYSV +  76)
+#define __NR_SYSV_nanosleep		(__NR_SYSV +  77)
+#define __NR_SYSV_lseek64		(__NR_SYSV +  78)
+#define __NR_SYSV_rmdir			(__NR_SYSV +  79)
+#define __NR_SYSV_mkdir			(__NR_SYSV +  80)
+#define __NR_SYSV_getdents		(__NR_SYSV +  81)
+#define __NR_SYSV_sginap		(__NR_SYSV +  82)
+#define __NR_SYSV_sgikopt		(__NR_SYSV +  83)
+#define __NR_SYSV_sysfs			(__NR_SYSV +  84)
+#define __NR_SYSV_getmsg		(__NR_SYSV +  85)
+#define __NR_SYSV_putmsg		(__NR_SYSV +  86)
+#define __NR_SYSV_poll			(__NR_SYSV +  87)
+#define __NR_SYSV_sigreturn		(__NR_SYSV +  88)
+#define __NR_SYSV_accept		(__NR_SYSV +  89)
+#define __NR_SYSV_bind			(__NR_SYSV +  90)
+#define __NR_SYSV_connect		(__NR_SYSV +  91)
+#define __NR_SYSV_gethostid		(__NR_SYSV +  92)
+#define __NR_SYSV_getpeername		(__NR_SYSV +  93)
+#define __NR_SYSV_getsockname		(__NR_SYSV +  94)
+#define __NR_SYSV_getsockopt		(__NR_SYSV +  95)
+#define __NR_SYSV_listen		(__NR_SYSV +  96)
+#define __NR_SYSV_recv			(__NR_SYSV +  97)
+#define __NR_SYSV_recvfrom		(__NR_SYSV +  98)
+#define __NR_SYSV_recvmsg		(__NR_SYSV +  99)
+#define __NR_SYSV_select		(__NR_SYSV + 100)
+#define __NR_SYSV_send			(__NR_SYSV + 101)
+#define __NR_SYSV_sendmsg		(__NR_SYSV + 102)
+#define __NR_SYSV_sendto		(__NR_SYSV + 103)
+#define __NR_SYSV_sethostid		(__NR_SYSV + 104)
+#define __NR_SYSV_setsockopt		(__NR_SYSV + 105)
+#define __NR_SYSV_shutdown		(__NR_SYSV + 106)
+#define __NR_SYSV_socket		(__NR_SYSV + 107)
+#define __NR_SYSV_gethostname		(__NR_SYSV + 108)
+#define __NR_SYSV_sethostname		(__NR_SYSV + 109)
+#define __NR_SYSV_getdomainname		(__NR_SYSV + 110)
+#define __NR_SYSV_setdomainname		(__NR_SYSV + 111)
+#define __NR_SYSV_truncate		(__NR_SYSV + 112)
+#define __NR_SYSV_ftruncate		(__NR_SYSV + 113)
+#define __NR_SYSV_rename		(__NR_SYSV + 114)
+#define __NR_SYSV_symlink		(__NR_SYSV + 115)
+#define __NR_SYSV_readlink		(__NR_SYSV + 116)
+#define __NR_SYSV_lstat			(__NR_SYSV + 117)
+#define __NR_SYSV_nfsmount		(__NR_SYSV + 118)
+#define __NR_SYSV_nfssvc		(__NR_SYSV + 119)
+#define __NR_SYSV_getfh			(__NR_SYSV + 120)
+#define __NR_SYSV_async_daemon		(__NR_SYSV + 121)
+#define __NR_SYSV_exportfs		(__NR_SYSV + 122)
+#define __NR_SYSV_setregid		(__NR_SYSV + 123)
+#define __NR_SYSV_setreuid		(__NR_SYSV + 124)
+#define __NR_SYSV_getitimer		(__NR_SYSV + 125)
+#define __NR_SYSV_setitimer		(__NR_SYSV + 126)
+#define __NR_SYSV_adjtime		(__NR_SYSV + 127)
+#define __NR_SYSV_BSD_getime		(__NR_SYSV + 128)
+#define __NR_SYSV_sproc			(__NR_SYSV + 129)
+#define __NR_SYSV_prctl			(__NR_SYSV + 130)
+#define __NR_SYSV_procblk		(__NR_SYSV + 131)
+#define __NR_SYSV_sprocsp		(__NR_SYSV + 132)
+#define __NR_SYSV_sgigsc		(__NR_SYSV + 133)
+#define __NR_SYSV_mmap			(__NR_SYSV + 134)
+#define __NR_SYSV_munmap		(__NR_SYSV + 135)
+#define __NR_SYSV_mprotect		(__NR_SYSV + 136)
+#define __NR_SYSV_msync			(__NR_SYSV + 137)
+#define __NR_SYSV_madvise		(__NR_SYSV + 138)
+#define __NR_SYSV_pagelock		(__NR_SYSV + 139)
+#define __NR_SYSV_getpagesize		(__NR_SYSV + 140)
+#define __NR_SYSV_quotactl		(__NR_SYSV + 141)
+#define __NR_SYSV_libdetach		(__NR_SYSV + 142)
+#define __NR_SYSV_BSDgetpgrp		(__NR_SYSV + 143)
+#define __NR_SYSV_BSDsetpgrp		(__NR_SYSV + 144)
+#define __NR_SYSV_vhangup		(__NR_SYSV + 145)
+#define __NR_SYSV_fsync			(__NR_SYSV + 146)
+#define __NR_SYSV_fchdir		(__NR_SYSV + 147)
+#define __NR_SYSV_getrlimit		(__NR_SYSV + 148)
+#define __NR_SYSV_setrlimit		(__NR_SYSV + 149)
+#define __NR_SYSV_cacheflush		(__NR_SYSV + 150)
+#define __NR_SYSV_cachectl		(__NR_SYSV + 151)
+#define __NR_SYSV_fchown		(__NR_SYSV + 152)
+#define __NR_SYSV_fchmod		(__NR_SYSV + 153)
+#define __NR_SYSV_wait3			(__NR_SYSV + 154)
+#define __NR_SYSV_socketpair		(__NR_SYSV + 155)
+#define __NR_SYSV_sysinfo		(__NR_SYSV + 156)
+#define __NR_SYSV_nuname		(__NR_SYSV + 157)
+#define __NR_SYSV_xstat			(__NR_SYSV + 158)
+#define __NR_SYSV_lxstat		(__NR_SYSV + 159)
+#define __NR_SYSV_fxstat		(__NR_SYSV + 160)
+#define __NR_SYSV_xmknod		(__NR_SYSV + 161)
+#define __NR_SYSV_ksigaction		(__NR_SYSV + 162)
+#define __NR_SYSV_sigpending		(__NR_SYSV + 163)
+#define __NR_SYSV_sigprocmask		(__NR_SYSV + 164)
+#define __NR_SYSV_sigsuspend		(__NR_SYSV + 165)
+#define __NR_SYSV_sigpoll		(__NR_SYSV + 166)
+#define __NR_SYSV_swapctl		(__NR_SYSV + 167)
+#define __NR_SYSV_getcontext		(__NR_SYSV + 168)
+#define __NR_SYSV_setcontext		(__NR_SYSV + 169)
+#define __NR_SYSV_waitsys		(__NR_SYSV + 170)
+#define __NR_SYSV_sigstack		(__NR_SYSV + 171)
+#define __NR_SYSV_sigaltstack		(__NR_SYSV + 172)
+#define __NR_SYSV_sigsendset		(__NR_SYSV + 173)
+#define __NR_SYSV_statvfs		(__NR_SYSV + 174)
+#define __NR_SYSV_fstatvfs		(__NR_SYSV + 175)
+#define __NR_SYSV_getpmsg		(__NR_SYSV + 176)
+#define __NR_SYSV_putpmsg		(__NR_SYSV + 177)
+#define __NR_SYSV_lchown		(__NR_SYSV + 178)
+#define __NR_SYSV_priocntl		(__NR_SYSV + 179)
+#define __NR_SYSV_ksigqueue		(__NR_SYSV + 180)
+#define __NR_SYSV_readv			(__NR_SYSV + 181)
+#define __NR_SYSV_writev		(__NR_SYSV + 182)
+#define __NR_SYSV_truncate64		(__NR_SYSV + 183)
+#define __NR_SYSV_ftruncate64		(__NR_SYSV + 184)
+#define __NR_SYSV_mmap64		(__NR_SYSV + 185)
+#define __NR_SYSV_dmi			(__NR_SYSV + 186)
+#define __NR_SYSV_pread			(__NR_SYSV + 187)
+#define __NR_SYSV_pwrite		(__NR_SYSV + 188)
+
+/*
+ * BSD 4.3 syscalls are in the range from 2000 to 2999
+ */
+#define __NR_BSD43			2000
+#define __NR_BSD43_syscall		(__NR_BSD43 +   0)
+#define __NR_BSD43_exit			(__NR_BSD43 +   1)
+#define __NR_BSD43_fork			(__NR_BSD43 +   2)
+#define __NR_BSD43_read			(__NR_BSD43 +   3)
+#define __NR_BSD43_write		(__NR_BSD43 +   4)
+#define __NR_BSD43_open			(__NR_BSD43 +   5)
+#define __NR_BSD43_close		(__NR_BSD43 +   6)
+#define __NR_BSD43_wait			(__NR_BSD43 +   7)
+#define __NR_BSD43_creat		(__NR_BSD43 +   8)
+#define __NR_BSD43_link			(__NR_BSD43 +   9)
+#define __NR_BSD43_unlink		(__NR_BSD43 +  10)
+#define __NR_BSD43_exec			(__NR_BSD43 +  11)
+#define __NR_BSD43_chdir		(__NR_BSD43 +  12)
+#define __NR_BSD43_time			(__NR_BSD43 +  13)
+#define __NR_BSD43_mknod		(__NR_BSD43 +  14)
+#define __NR_BSD43_chmod		(__NR_BSD43 +  15)
+#define __NR_BSD43_chown		(__NR_BSD43 +  16)
+#define __NR_BSD43_sbreak		(__NR_BSD43 +  17)
+#define __NR_BSD43_oldstat		(__NR_BSD43 +  18)
+#define __NR_BSD43_lseek		(__NR_BSD43 +  19)
+#define __NR_BSD43_getpid		(__NR_BSD43 +  20)
+#define __NR_BSD43_oldmount		(__NR_BSD43 +  21)
+#define __NR_BSD43_umount		(__NR_BSD43 +  22)
+#define __NR_BSD43_setuid		(__NR_BSD43 +  23)
+#define __NR_BSD43_getuid		(__NR_BSD43 +  24)
+#define __NR_BSD43_stime		(__NR_BSD43 +  25)
+#define __NR_BSD43_ptrace		(__NR_BSD43 +  26)
+#define __NR_BSD43_alarm		(__NR_BSD43 +  27)
+#define __NR_BSD43_oldfstat		(__NR_BSD43 +  28)
+#define __NR_BSD43_pause		(__NR_BSD43 +  29)
+#define __NR_BSD43_utime		(__NR_BSD43 +  30)
+#define __NR_BSD43_stty			(__NR_BSD43 +  31)
+#define __NR_BSD43_gtty			(__NR_BSD43 +  32)
+#define __NR_BSD43_access		(__NR_BSD43 +  33)
+#define __NR_BSD43_nice			(__NR_BSD43 +  34)
+#define __NR_BSD43_ftime		(__NR_BSD43 +  35)
+#define __NR_BSD43_sync			(__NR_BSD43 +  36)
+#define __NR_BSD43_kill			(__NR_BSD43 +  37)
+#define __NR_BSD43_stat			(__NR_BSD43 +  38)
+#define __NR_BSD43_oldsetpgrp		(__NR_BSD43 +  39)
+#define __NR_BSD43_lstat		(__NR_BSD43 +  40)
+#define __NR_BSD43_dup			(__NR_BSD43 +  41)
+#define __NR_BSD43_pipe			(__NR_BSD43 +  42)
+#define __NR_BSD43_times		(__NR_BSD43 +  43)
+#define __NR_BSD43_profil		(__NR_BSD43 +  44)
+#define __NR_BSD43_msgsys		(__NR_BSD43 +  45)
+#define __NR_BSD43_setgid		(__NR_BSD43 +  46)
+#define __NR_BSD43_getgid		(__NR_BSD43 +  47)
+#define __NR_BSD43_ssig			(__NR_BSD43 +  48)
+#define __NR_BSD43_reserved1		(__NR_BSD43 +  49)
+#define __NR_BSD43_reserved2		(__NR_BSD43 +  50)
+#define __NR_BSD43_sysacct		(__NR_BSD43 +  51)
+#define __NR_BSD43_phys			(__NR_BSD43 +  52)
+#define __NR_BSD43_lock			(__NR_BSD43 +  53)
+#define __NR_BSD43_ioctl		(__NR_BSD43 +  54)
+#define __NR_BSD43_reboot		(__NR_BSD43 +  55)
+#define __NR_BSD43_mpxchan		(__NR_BSD43 +  56)
+#define __NR_BSD43_symlink		(__NR_BSD43 +  57)
+#define __NR_BSD43_readlink		(__NR_BSD43 +  58)
+#define __NR_BSD43_execve		(__NR_BSD43 +  59)
+#define __NR_BSD43_umask		(__NR_BSD43 +  60)
+#define __NR_BSD43_chroot		(__NR_BSD43 +  61)
+#define __NR_BSD43_fstat		(__NR_BSD43 +  62)
+#define __NR_BSD43_reserved3		(__NR_BSD43 +  63)
+#define __NR_BSD43_getpagesize		(__NR_BSD43 +  64)
+#define __NR_BSD43_mremap		(__NR_BSD43 +  65)
+#define __NR_BSD43_vfork		(__NR_BSD43 +  66)
+#define __NR_BSD43_vread		(__NR_BSD43 +  67)
+#define __NR_BSD43_vwrite		(__NR_BSD43 +  68)
+#define __NR_BSD43_sbrk			(__NR_BSD43 +  69)
+#define __NR_BSD43_sstk			(__NR_BSD43 +  70)
+#define __NR_BSD43_mmap			(__NR_BSD43 +  71)
+#define __NR_BSD43_vadvise		(__NR_BSD43 +  72)
+#define __NR_BSD43_munmap		(__NR_BSD43 +  73)
+#define __NR_BSD43_mprotect		(__NR_BSD43 +  74)
+#define __NR_BSD43_madvise		(__NR_BSD43 +  75)
+#define __NR_BSD43_vhangup		(__NR_BSD43 +  76)
+#define __NR_BSD43_vlimit		(__NR_BSD43 +  77)
+#define __NR_BSD43_mincore		(__NR_BSD43 +  78)
+#define __NR_BSD43_getgroups		(__NR_BSD43 +  79)
+#define __NR_BSD43_setgroups		(__NR_BSD43 +  80)
+#define __NR_BSD43_getpgrp		(__NR_BSD43 +  81)
+#define __NR_BSD43_setpgrp		(__NR_BSD43 +  82)
+#define __NR_BSD43_setitimer		(__NR_BSD43 +  83)
+#define __NR_BSD43_wait3		(__NR_BSD43 +  84)
+#define __NR_BSD43_swapon		(__NR_BSD43 +  85)
+#define __NR_BSD43_getitimer		(__NR_BSD43 +  86)
+#define __NR_BSD43_gethostname		(__NR_BSD43 +  87)
+#define __NR_BSD43_sethostname		(__NR_BSD43 +  88)
+#define __NR_BSD43_getdtablesize	(__NR_BSD43 +  89)
+#define __NR_BSD43_dup2			(__NR_BSD43 +  90)
+#define __NR_BSD43_getdopt		(__NR_BSD43 +  91)
+#define __NR_BSD43_fcntl		(__NR_BSD43 +  92)
+#define __NR_BSD43_select		(__NR_BSD43 +  93)
+#define __NR_BSD43_setdopt		(__NR_BSD43 +  94)
+#define __NR_BSD43_fsync		(__NR_BSD43 +  95)
+#define __NR_BSD43_setpriority		(__NR_BSD43 +  96)
+#define __NR_BSD43_socket		(__NR_BSD43 +  97)
+#define __NR_BSD43_connect		(__NR_BSD43 +  98)
+#define __NR_BSD43_oldaccept		(__NR_BSD43 +  99)
+#define __NR_BSD43_getpriority		(__NR_BSD43 + 100)
+#define __NR_BSD43_send			(__NR_BSD43 + 101)
+#define __NR_BSD43_recv			(__NR_BSD43 + 102)
+#define __NR_BSD43_sigreturn		(__NR_BSD43 + 103)
+#define __NR_BSD43_bind			(__NR_BSD43 + 104)
+#define __NR_BSD43_setsockopt		(__NR_BSD43 + 105)
+#define __NR_BSD43_listen		(__NR_BSD43 + 106)
+#define __NR_BSD43_vtimes		(__NR_BSD43 + 107)
+#define __NR_BSD43_sigvec		(__NR_BSD43 + 108)
+#define __NR_BSD43_sigblock		(__NR_BSD43 + 109)
+#define __NR_BSD43_sigsetmask		(__NR_BSD43 + 110)
+#define __NR_BSD43_sigpause		(__NR_BSD43 + 111)
+#define __NR_BSD43_sigstack		(__NR_BSD43 + 112)
+#define __NR_BSD43_oldrecvmsg		(__NR_BSD43 + 113)
+#define __NR_BSD43_oldsendmsg		(__NR_BSD43 + 114)
+#define __NR_BSD43_vtrace		(__NR_BSD43 + 115)
+#define __NR_BSD43_gettimeofday		(__NR_BSD43 + 116)
+#define __NR_BSD43_getrusage		(__NR_BSD43 + 117)
+#define __NR_BSD43_getsockopt		(__NR_BSD43 + 118)
+#define __NR_BSD43_reserved4		(__NR_BSD43 + 119)
+#define __NR_BSD43_readv		(__NR_BSD43 + 120)
+#define __NR_BSD43_writev		(__NR_BSD43 + 121)
+#define __NR_BSD43_settimeofday		(__NR_BSD43 + 122)
+#define __NR_BSD43_fchown		(__NR_BSD43 + 123)
+#define __NR_BSD43_fchmod		(__NR_BSD43 + 124)
+#define __NR_BSD43_oldrecvfrom		(__NR_BSD43 + 125)
+#define __NR_BSD43_setreuid		(__NR_BSD43 + 126)
+#define __NR_BSD43_setregid		(__NR_BSD43 + 127)
+#define __NR_BSD43_rename		(__NR_BSD43 + 128)
+#define __NR_BSD43_truncate		(__NR_BSD43 + 129)
+#define __NR_BSD43_ftruncate		(__NR_BSD43 + 130)
+#define __NR_BSD43_flock		(__NR_BSD43 + 131)
+#define __NR_BSD43_semsys		(__NR_BSD43 + 132)
+#define __NR_BSD43_sendto		(__NR_BSD43 + 133)
+#define __NR_BSD43_shutdown		(__NR_BSD43 + 134)
+#define __NR_BSD43_socketpair		(__NR_BSD43 + 135)
+#define __NR_BSD43_mkdir		(__NR_BSD43 + 136)
+#define __NR_BSD43_rmdir		(__NR_BSD43 + 137)
+#define __NR_BSD43_utimes		(__NR_BSD43 + 138)
+#define __NR_BSD43_sigcleanup		(__NR_BSD43 + 139)
+#define __NR_BSD43_adjtime		(__NR_BSD43 + 140)
+#define __NR_BSD43_oldgetpeername	(__NR_BSD43 + 141)
+#define __NR_BSD43_gethostid		(__NR_BSD43 + 142)
+#define __NR_BSD43_sethostid		(__NR_BSD43 + 143)
+#define __NR_BSD43_getrlimit		(__NR_BSD43 + 144)
+#define __NR_BSD43_setrlimit		(__NR_BSD43 + 145)
+#define __NR_BSD43_killpg		(__NR_BSD43 + 146)
+#define __NR_BSD43_shmsys		(__NR_BSD43 + 147)
+#define __NR_BSD43_quota		(__NR_BSD43 + 148)
+#define __NR_BSD43_qquota		(__NR_BSD43 + 149)
+#define __NR_BSD43_oldgetsockname	(__NR_BSD43 + 150)
+#define __NR_BSD43_sysmips		(__NR_BSD43 + 151)
+#define __NR_BSD43_cacheflush		(__NR_BSD43 + 152)
+#define __NR_BSD43_cachectl		(__NR_BSD43 + 153)
+#define __NR_BSD43_debug		(__NR_BSD43 + 154)
+#define __NR_BSD43_reserved5		(__NR_BSD43 + 155)
+#define __NR_BSD43_reserved6		(__NR_BSD43 + 156)
+#define __NR_BSD43_nfs_mount		(__NR_BSD43 + 157)
+#define __NR_BSD43_nfs_svc		(__NR_BSD43 + 158)
+#define __NR_BSD43_getdirentries	(__NR_BSD43 + 159)
+#define __NR_BSD43_statfs		(__NR_BSD43 + 160)
+#define __NR_BSD43_fstatfs		(__NR_BSD43 + 161)
+#define __NR_BSD43_unmount		(__NR_BSD43 + 162)
+#define __NR_BSD43_async_daemon		(__NR_BSD43 + 163)
+#define __NR_BSD43_nfs_getfh		(__NR_BSD43 + 164)
+#define __NR_BSD43_getdomainname	(__NR_BSD43 + 165)
+#define __NR_BSD43_setdomainname	(__NR_BSD43 + 166)
+#define __NR_BSD43_pcfs_mount		(__NR_BSD43 + 167)
+#define __NR_BSD43_quotactl		(__NR_BSD43 + 168)
+#define __NR_BSD43_oldexportfs		(__NR_BSD43 + 169)
+#define __NR_BSD43_smount		(__NR_BSD43 + 170)
+#define __NR_BSD43_mipshwconf		(__NR_BSD43 + 171)
+#define __NR_BSD43_exportfs		(__NR_BSD43 + 172)
+#define __NR_BSD43_nfsfh_open		(__NR_BSD43 + 173)
+#define __NR_BSD43_libattach		(__NR_BSD43 + 174)
+#define __NR_BSD43_libdetach		(__NR_BSD43 + 175)
+#define __NR_BSD43_accept		(__NR_BSD43 + 176)
+#define __NR_BSD43_reserved7		(__NR_BSD43 + 177)
+#define __NR_BSD43_reserved8		(__NR_BSD43 + 178)
+#define __NR_BSD43_recvmsg		(__NR_BSD43 + 179)
+#define __NR_BSD43_recvfrom		(__NR_BSD43 + 180)
+#define __NR_BSD43_sendmsg		(__NR_BSD43 + 181)
+#define __NR_BSD43_getpeername		(__NR_BSD43 + 182)
+#define __NR_BSD43_getsockname		(__NR_BSD43 + 183)
+#define __NR_BSD43_aread		(__NR_BSD43 + 184)
+#define __NR_BSD43_awrite		(__NR_BSD43 + 185)
+#define __NR_BSD43_listio		(__NR_BSD43 + 186)
+#define __NR_BSD43_acancel		(__NR_BSD43 + 187)
+#define __NR_BSD43_astatus		(__NR_BSD43 + 188)
+#define __NR_BSD43_await		(__NR_BSD43 + 189)
+#define __NR_BSD43_areadv		(__NR_BSD43 + 190)
+#define __NR_BSD43_awritev		(__NR_BSD43 + 191)
+
+/*
+ * POSIX syscalls are in the range from 3000 to 3999
+ */
+#define __NR_POSIX			3000
+#define __NR_POSIX_syscall		(__NR_POSIX +   0)
+#define __NR_POSIX_exit			(__NR_POSIX +   1)
+#define __NR_POSIX_fork			(__NR_POSIX +   2)
+#define __NR_POSIX_read			(__NR_POSIX +   3)
+#define __NR_POSIX_write		(__NR_POSIX +   4)
+#define __NR_POSIX_open			(__NR_POSIX +   5)
+#define __NR_POSIX_close		(__NR_POSIX +   6)
+#define __NR_POSIX_wait			(__NR_POSIX +   7)
+#define __NR_POSIX_creat		(__NR_POSIX +   8)
+#define __NR_POSIX_link			(__NR_POSIX +   9)
+#define __NR_POSIX_unlink		(__NR_POSIX +  10)
+#define __NR_POSIX_exec			(__NR_POSIX +  11)
+#define __NR_POSIX_chdir		(__NR_POSIX +  12)
+#define __NR_POSIX_gtime		(__NR_POSIX +  13)
+#define __NR_POSIX_mknod		(__NR_POSIX +  14)
+#define __NR_POSIX_chmod		(__NR_POSIX +  15)
+#define __NR_POSIX_chown		(__NR_POSIX +  16)
+#define __NR_POSIX_sbreak		(__NR_POSIX +  17)
+#define __NR_POSIX_stat			(__NR_POSIX +  18)
+#define __NR_POSIX_lseek		(__NR_POSIX +  19)
+#define __NR_POSIX_getpid		(__NR_POSIX +  20)
+#define __NR_POSIX_mount		(__NR_POSIX +  21)
+#define __NR_POSIX_umount		(__NR_POSIX +  22)
+#define __NR_POSIX_setuid		(__NR_POSIX +  23)
+#define __NR_POSIX_getuid		(__NR_POSIX +  24)
+#define __NR_POSIX_stime		(__NR_POSIX +  25)
+#define __NR_POSIX_ptrace		(__NR_POSIX +  26)
+#define __NR_POSIX_alarm		(__NR_POSIX +  27)
+#define __NR_POSIX_fstat		(__NR_POSIX +  28)
+#define __NR_POSIX_pause		(__NR_POSIX +  29)
+#define __NR_POSIX_utime		(__NR_POSIX +  30)
+#define __NR_POSIX_stty			(__NR_POSIX +  31)
+#define __NR_POSIX_gtty			(__NR_POSIX +  32)
+#define __NR_POSIX_access		(__NR_POSIX +  33)
+#define __NR_POSIX_nice			(__NR_POSIX +  34)
+#define __NR_POSIX_statfs		(__NR_POSIX +  35)
+#define __NR_POSIX_sync			(__NR_POSIX +  36)
+#define __NR_POSIX_kill			(__NR_POSIX +  37)
+#define __NR_POSIX_fstatfs		(__NR_POSIX +  38)
+#define __NR_POSIX_getpgrp		(__NR_POSIX +  39)
+#define __NR_POSIX_syssgi		(__NR_POSIX +  40)
+#define __NR_POSIX_dup			(__NR_POSIX +  41)
+#define __NR_POSIX_pipe			(__NR_POSIX +  42)
+#define __NR_POSIX_times		(__NR_POSIX +  43)
+#define __NR_POSIX_profil		(__NR_POSIX +  44)
+#define __NR_POSIX_lock			(__NR_POSIX +  45)
+#define __NR_POSIX_setgid		(__NR_POSIX +  46)
+#define __NR_POSIX_getgid		(__NR_POSIX +  47)
+#define __NR_POSIX_sig			(__NR_POSIX +  48)
+#define __NR_POSIX_msgsys		(__NR_POSIX +  49)
+#define __NR_POSIX_sysmips		(__NR_POSIX +  50)
+#define __NR_POSIX_sysacct		(__NR_POSIX +  51)
+#define __NR_POSIX_shmsys		(__NR_POSIX +  52)
+#define __NR_POSIX_semsys		(__NR_POSIX +  53)
+#define __NR_POSIX_ioctl		(__NR_POSIX +  54)
+#define __NR_POSIX_uadmin		(__NR_POSIX +  55)
+#define __NR_POSIX_exch			(__NR_POSIX +  56)
+#define __NR_POSIX_utssys		(__NR_POSIX +  57)
+#define __NR_POSIX_USG_reserved1	(__NR_POSIX +  58)
+#define __NR_POSIX_exece		(__NR_POSIX +  59)
+#define __NR_POSIX_umask		(__NR_POSIX +  60)
+#define __NR_POSIX_chroot		(__NR_POSIX +  61)
+#define __NR_POSIX_fcntl		(__NR_POSIX +  62)
+#define __NR_POSIX_ulimit		(__NR_POSIX +  63)
+#define __NR_POSIX_SAFARI4_reserved1	(__NR_POSIX +  64)
+#define __NR_POSIX_SAFARI4_reserved2	(__NR_POSIX +  65)
+#define __NR_POSIX_SAFARI4_reserved3	(__NR_POSIX +  66)
+#define __NR_POSIX_SAFARI4_reserved4	(__NR_POSIX +  67)
+#define __NR_POSIX_SAFARI4_reserved5	(__NR_POSIX +  68)
+#define __NR_POSIX_SAFARI4_reserved6	(__NR_POSIX +  69)
+#define __NR_POSIX_advfs		(__NR_POSIX +  70)
+#define __NR_POSIX_unadvfs		(__NR_POSIX +  71)
+#define __NR_POSIX_rmount		(__NR_POSIX +  72)
+#define __NR_POSIX_rumount		(__NR_POSIX +  73)
+#define __NR_POSIX_rfstart		(__NR_POSIX +  74)
+#define __NR_POSIX_reserved1		(__NR_POSIX +  75)
+#define __NR_POSIX_rdebug		(__NR_POSIX +  76)
+#define __NR_POSIX_rfstop		(__NR_POSIX +  77)
+#define __NR_POSIX_rfsys		(__NR_POSIX +  78)
+#define __NR_POSIX_rmdir		(__NR_POSIX +  79)
+#define __NR_POSIX_mkdir		(__NR_POSIX +  80)
+#define __NR_POSIX_getdents		(__NR_POSIX +  81)
+#define __NR_POSIX_sginap		(__NR_POSIX +  82)
+#define __NR_POSIX_sgikopt		(__NR_POSIX +  83)
+#define __NR_POSIX_sysfs		(__NR_POSIX +  84)
+#define __NR_POSIX_getmsg		(__NR_POSIX +  85)
+#define __NR_POSIX_putmsg		(__NR_POSIX +  86)
+#define __NR_POSIX_poll			(__NR_POSIX +  87)
+#define __NR_POSIX_sigreturn		(__NR_POSIX +  88)
+#define __NR_POSIX_accept		(__NR_POSIX +  89)
+#define __NR_POSIX_bind			(__NR_POSIX +  90)
+#define __NR_POSIX_connect		(__NR_POSIX +  91)
+#define __NR_POSIX_gethostid		(__NR_POSIX +  92)
+#define __NR_POSIX_getpeername		(__NR_POSIX +  93)
+#define __NR_POSIX_getsockname		(__NR_POSIX +  94)
+#define __NR_POSIX_getsockopt		(__NR_POSIX +  95)
+#define __NR_POSIX_listen		(__NR_POSIX +  96)
+#define __NR_POSIX_recv			(__NR_POSIX +  97)
+#define __NR_POSIX_recvfrom		(__NR_POSIX +  98)
+#define __NR_POSIX_recvmsg		(__NR_POSIX +  99)
+#define __NR_POSIX_select		(__NR_POSIX + 100)
+#define __NR_POSIX_send			(__NR_POSIX + 101)
+#define __NR_POSIX_sendmsg		(__NR_POSIX + 102)
+#define __NR_POSIX_sendto		(__NR_POSIX + 103)
+#define __NR_POSIX_sethostid		(__NR_POSIX + 104)
+#define __NR_POSIX_setsockopt		(__NR_POSIX + 105)
+#define __NR_POSIX_shutdown		(__NR_POSIX + 106)
+#define __NR_POSIX_socket		(__NR_POSIX + 107)
+#define __NR_POSIX_gethostname		(__NR_POSIX + 108)
+#define __NR_POSIX_sethostname		(__NR_POSIX + 109)
+#define __NR_POSIX_getdomainname	(__NR_POSIX + 110)
+#define __NR_POSIX_setdomainname	(__NR_POSIX + 111)
+#define __NR_POSIX_truncate		(__NR_POSIX + 112)
+#define __NR_POSIX_ftruncate		(__NR_POSIX + 113)
+#define __NR_POSIX_rename		(__NR_POSIX + 114)
+#define __NR_POSIX_symlink		(__NR_POSIX + 115)
+#define __NR_POSIX_readlink		(__NR_POSIX + 116)
+#define __NR_POSIX_lstat		(__NR_POSIX + 117)
+#define __NR_POSIX_nfs_mount		(__NR_POSIX + 118)
+#define __NR_POSIX_nfs_svc		(__NR_POSIX + 119)
+#define __NR_POSIX_nfs_getfh		(__NR_POSIX + 120)
+#define __NR_POSIX_async_daemon		(__NR_POSIX + 121)
+#define __NR_POSIX_exportfs		(__NR_POSIX + 122)
+#define __NR_POSIX_SGI_setregid		(__NR_POSIX + 123)
+#define __NR_POSIX_SGI_setreuid		(__NR_POSIX + 124)
+#define __NR_POSIX_getitimer		(__NR_POSIX + 125)
+#define __NR_POSIX_setitimer		(__NR_POSIX + 126)
+#define __NR_POSIX_adjtime		(__NR_POSIX + 127)
+#define __NR_POSIX_SGI_bsdgettime	(__NR_POSIX + 128)
+#define __NR_POSIX_SGI_sproc		(__NR_POSIX + 129)
+#define __NR_POSIX_SGI_prctl		(__NR_POSIX + 130)
+#define __NR_POSIX_SGI_blkproc		(__NR_POSIX + 131)
+#define __NR_POSIX_SGI_reserved1	(__NR_POSIX + 132)
+#define __NR_POSIX_SGI_sgigsc		(__NR_POSIX + 133)
+#define __NR_POSIX_SGI_mmap		(__NR_POSIX + 134)
+#define __NR_POSIX_SGI_munmap		(__NR_POSIX + 135)
+#define __NR_POSIX_SGI_mprotect		(__NR_POSIX + 136)
+#define __NR_POSIX_SGI_msync		(__NR_POSIX + 137)
+#define __NR_POSIX_SGI_madvise		(__NR_POSIX + 138)
+#define __NR_POSIX_SGI_mpin		(__NR_POSIX + 139)
+#define __NR_POSIX_SGI_getpagesize	(__NR_POSIX + 140)
+#define __NR_POSIX_SGI_libattach	(__NR_POSIX + 141)
+#define __NR_POSIX_SGI_libdetach	(__NR_POSIX + 142)
+#define __NR_POSIX_SGI_getpgrp		(__NR_POSIX + 143)
+#define __NR_POSIX_SGI_setpgrp		(__NR_POSIX + 144)
+#define __NR_POSIX_SGI_reserved2	(__NR_POSIX + 145)
+#define __NR_POSIX_SGI_reserved3	(__NR_POSIX + 146)
+#define __NR_POSIX_SGI_reserved4	(__NR_POSIX + 147)
+#define __NR_POSIX_SGI_reserved5	(__NR_POSIX + 148)
+#define __NR_POSIX_SGI_reserved6	(__NR_POSIX + 149)
+#define __NR_POSIX_cacheflush		(__NR_POSIX + 150)
+#define __NR_POSIX_cachectl		(__NR_POSIX + 151)
+#define __NR_POSIX_fchown		(__NR_POSIX + 152)
+#define __NR_POSIX_fchmod		(__NR_POSIX + 153)
+#define __NR_POSIX_wait3		(__NR_POSIX + 154)
+#define __NR_POSIX_mmap			(__NR_POSIX + 155)
+#define __NR_POSIX_munmap		(__NR_POSIX + 156)
+#define __NR_POSIX_madvise		(__NR_POSIX + 157)
+#define __NR_POSIX_BSD_getpagesize	(__NR_POSIX + 158)
+#define __NR_POSIX_setreuid		(__NR_POSIX + 159)
+#define __NR_POSIX_setregid		(__NR_POSIX + 160)
+#define __NR_POSIX_setpgid		(__NR_POSIX + 161)
+#define __NR_POSIX_getgroups		(__NR_POSIX + 162)
+#define __NR_POSIX_setgroups		(__NR_POSIX + 163)
+#define __NR_POSIX_gettimeofday		(__NR_POSIX + 164)
+#define __NR_POSIX_getrusage		(__NR_POSIX + 165)
+#define __NR_POSIX_getrlimit		(__NR_POSIX + 166)
+#define __NR_POSIX_setrlimit		(__NR_POSIX + 167)
+#define __NR_POSIX_waitpid		(__NR_POSIX + 168)
+#define __NR_POSIX_dup2			(__NR_POSIX + 169)
+#define __NR_POSIX_reserved2		(__NR_POSIX + 170)
+#define __NR_POSIX_reserved3		(__NR_POSIX + 171)
+#define __NR_POSIX_reserved4		(__NR_POSIX + 172)
+#define __NR_POSIX_reserved5		(__NR_POSIX + 173)
+#define __NR_POSIX_reserved6		(__NR_POSIX + 174)
+#define __NR_POSIX_reserved7		(__NR_POSIX + 175)
+#define __NR_POSIX_reserved8		(__NR_POSIX + 176)
+#define __NR_POSIX_reserved9		(__NR_POSIX + 177)
+#define __NR_POSIX_reserved10		(__NR_POSIX + 178)
+#define __NR_POSIX_reserved11		(__NR_POSIX + 179)
+#define __NR_POSIX_reserved12		(__NR_POSIX + 180)
+#define __NR_POSIX_reserved13		(__NR_POSIX + 181)
+#define __NR_POSIX_reserved14		(__NR_POSIX + 182)
+#define __NR_POSIX_reserved15		(__NR_POSIX + 183)
+#define __NR_POSIX_reserved16		(__NR_POSIX + 184)
+#define __NR_POSIX_reserved17		(__NR_POSIX + 185)
+#define __NR_POSIX_reserved18		(__NR_POSIX + 186)
+#define __NR_POSIX_reserved19		(__NR_POSIX + 187)
+#define __NR_POSIX_reserved20		(__NR_POSIX + 188)
+#define __NR_POSIX_reserved21		(__NR_POSIX + 189)
+#define __NR_POSIX_reserved22		(__NR_POSIX + 190)
+#define __NR_POSIX_reserved23		(__NR_POSIX + 191)
+#define __NR_POSIX_reserved24		(__NR_POSIX + 192)
+#define __NR_POSIX_reserved25		(__NR_POSIX + 193)
+#define __NR_POSIX_reserved26		(__NR_POSIX + 194)
+#define __NR_POSIX_reserved27		(__NR_POSIX + 195)
+#define __NR_POSIX_reserved28		(__NR_POSIX + 196)
+#define __NR_POSIX_reserved29		(__NR_POSIX + 197)
+#define __NR_POSIX_reserved30		(__NR_POSIX + 198)
+#define __NR_POSIX_reserved31		(__NR_POSIX + 199)
+#define __NR_POSIX_reserved32		(__NR_POSIX + 200)
+#define __NR_POSIX_reserved33		(__NR_POSIX + 201)
+#define __NR_POSIX_reserved34		(__NR_POSIX + 202)
+#define __NR_POSIX_reserved35		(__NR_POSIX + 203)
+#define __NR_POSIX_reserved36		(__NR_POSIX + 204)
+#define __NR_POSIX_reserved37		(__NR_POSIX + 205)
+#define __NR_POSIX_reserved38		(__NR_POSIX + 206)
+#define __NR_POSIX_reserved39		(__NR_POSIX + 207)
+#define __NR_POSIX_reserved40		(__NR_POSIX + 208)
+#define __NR_POSIX_reserved41		(__NR_POSIX + 209)
+#define __NR_POSIX_reserved42		(__NR_POSIX + 210)
+#define __NR_POSIX_reserved43		(__NR_POSIX + 211)
+#define __NR_POSIX_reserved44		(__NR_POSIX + 212)
+#define __NR_POSIX_reserved45		(__NR_POSIX + 213)
+#define __NR_POSIX_reserved46		(__NR_POSIX + 214)
+#define __NR_POSIX_reserved47		(__NR_POSIX + 215)
+#define __NR_POSIX_reserved48		(__NR_POSIX + 216)
+#define __NR_POSIX_reserved49		(__NR_POSIX + 217)
+#define __NR_POSIX_reserved50		(__NR_POSIX + 218)
+#define __NR_POSIX_reserved51		(__NR_POSIX + 219)
+#define __NR_POSIX_reserved52		(__NR_POSIX + 220)
+#define __NR_POSIX_reserved53		(__NR_POSIX + 221)
+#define __NR_POSIX_reserved54		(__NR_POSIX + 222)
+#define __NR_POSIX_reserved55		(__NR_POSIX + 223)
+#define __NR_POSIX_reserved56		(__NR_POSIX + 224)
+#define __NR_POSIX_reserved57		(__NR_POSIX + 225)
+#define __NR_POSIX_reserved58		(__NR_POSIX + 226)
+#define __NR_POSIX_reserved59		(__NR_POSIX + 227)
+#define __NR_POSIX_reserved60		(__NR_POSIX + 228)
+#define __NR_POSIX_reserved61		(__NR_POSIX + 229)
+#define __NR_POSIX_reserved62		(__NR_POSIX + 230)
+#define __NR_POSIX_reserved63		(__NR_POSIX + 231)
+#define __NR_POSIX_reserved64		(__NR_POSIX + 232)
+#define __NR_POSIX_reserved65		(__NR_POSIX + 233)
+#define __NR_POSIX_reserved66		(__NR_POSIX + 234)
+#define __NR_POSIX_reserved67		(__NR_POSIX + 235)
+#define __NR_POSIX_reserved68		(__NR_POSIX + 236)
+#define __NR_POSIX_reserved69		(__NR_POSIX + 237)
+#define __NR_POSIX_reserved70		(__NR_POSIX + 238)
+#define __NR_POSIX_reserved71		(__NR_POSIX + 239)
+#define __NR_POSIX_reserved72		(__NR_POSIX + 240)
+#define __NR_POSIX_reserved73		(__NR_POSIX + 241)
+#define __NR_POSIX_reserved74		(__NR_POSIX + 242)
+#define __NR_POSIX_reserved75		(__NR_POSIX + 243)
+#define __NR_POSIX_reserved76		(__NR_POSIX + 244)
+#define __NR_POSIX_reserved77		(__NR_POSIX + 245)
+#define __NR_POSIX_reserved78		(__NR_POSIX + 246)
+#define __NR_POSIX_reserved79		(__NR_POSIX + 247)
+#define __NR_POSIX_reserved80		(__NR_POSIX + 248)
+#define __NR_POSIX_reserved81		(__NR_POSIX + 249)
+#define __NR_POSIX_reserved82		(__NR_POSIX + 250)
+#define __NR_POSIX_reserved83		(__NR_POSIX + 251)
+#define __NR_POSIX_reserved84		(__NR_POSIX + 252)
+#define __NR_POSIX_reserved85		(__NR_POSIX + 253)
+#define __NR_POSIX_reserved86		(__NR_POSIX + 254)
+#define __NR_POSIX_reserved87		(__NR_POSIX + 255)
+#define __NR_POSIX_reserved88		(__NR_POSIX + 256)
+#define __NR_POSIX_reserved89		(__NR_POSIX + 257)
+#define __NR_POSIX_reserved90		(__NR_POSIX + 258)
+#define __NR_POSIX_reserved91		(__NR_POSIX + 259)
+#define __NR_POSIX_netboot		(__NR_POSIX + 260)
+#define __NR_POSIX_netunboot		(__NR_POSIX + 261)
+#define __NR_POSIX_rdump		(__NR_POSIX + 262)
+#define __NR_POSIX_setsid		(__NR_POSIX + 263)
+#define __NR_POSIX_getmaxsig		(__NR_POSIX + 264)
+#define __NR_POSIX_sigpending		(__NR_POSIX + 265)
+#define __NR_POSIX_sigprocmask		(__NR_POSIX + 266)
+#define __NR_POSIX_sigsuspend		(__NR_POSIX + 267)
+#define __NR_POSIX_sigaction		(__NR_POSIX + 268)
+#define __NR_POSIX_MIPS_reserved1	(__NR_POSIX + 269)
+#define __NR_POSIX_MIPS_reserved2	(__NR_POSIX + 270)
+#define __NR_POSIX_MIPS_reserved3	(__NR_POSIX + 271)
+#define __NR_POSIX_MIPS_reserved4	(__NR_POSIX + 272)
+#define __NR_POSIX_MIPS_reserved5	(__NR_POSIX + 273)
+#define __NR_POSIX_MIPS_reserved6	(__NR_POSIX + 274)
+#define __NR_POSIX_MIPS_reserved7	(__NR_POSIX + 275)
+#define __NR_POSIX_MIPS_reserved8	(__NR_POSIX + 276)
+#define __NR_POSIX_MIPS_reserved9	(__NR_POSIX + 277)
+#define __NR_POSIX_MIPS_reserved10	(__NR_POSIX + 278)
+#define __NR_POSIX_MIPS_reserved11	(__NR_POSIX + 279)
+#define __NR_POSIX_TANDEM_reserved1	(__NR_POSIX + 280)
+#define __NR_POSIX_TANDEM_reserved2	(__NR_POSIX + 281)
+#define __NR_POSIX_TANDEM_reserved3	(__NR_POSIX + 282)
+#define __NR_POSIX_TANDEM_reserved4	(__NR_POSIX + 283)
+#define __NR_POSIX_TANDEM_reserved5	(__NR_POSIX + 284)
+#define __NR_POSIX_TANDEM_reserved6	(__NR_POSIX + 285)
+#define __NR_POSIX_TANDEM_reserved7	(__NR_POSIX + 286)
+#define __NR_POSIX_TANDEM_reserved8	(__NR_POSIX + 287)
+#define __NR_POSIX_TANDEM_reserved9	(__NR_POSIX + 288)
+#define __NR_POSIX_TANDEM_reserved10	(__NR_POSIX + 289)
+#define __NR_POSIX_TANDEM_reserved11	(__NR_POSIX + 290)
+#define __NR_POSIX_TANDEM_reserved12	(__NR_POSIX + 291)
+#define __NR_POSIX_TANDEM_reserved13	(__NR_POSIX + 292)
+#define __NR_POSIX_TANDEM_reserved14	(__NR_POSIX + 293)
+#define __NR_POSIX_TANDEM_reserved15	(__NR_POSIX + 294)
+#define __NR_POSIX_TANDEM_reserved16	(__NR_POSIX + 295)
+#define __NR_POSIX_TANDEM_reserved17	(__NR_POSIX + 296)
+#define __NR_POSIX_TANDEM_reserved18	(__NR_POSIX + 297)
+#define __NR_POSIX_TANDEM_reserved19	(__NR_POSIX + 298)
+#define __NR_POSIX_TANDEM_reserved20	(__NR_POSIX + 299)
+#define __NR_POSIX_SGI_reserved7	(__NR_POSIX + 300)
+#define __NR_POSIX_SGI_reserved8	(__NR_POSIX + 301)
+#define __NR_POSIX_SGI_reserved9	(__NR_POSIX + 302)
+#define __NR_POSIX_SGI_reserved10	(__NR_POSIX + 303)
+#define __NR_POSIX_SGI_reserved11	(__NR_POSIX + 304)
+#define __NR_POSIX_SGI_reserved12	(__NR_POSIX + 305)
+#define __NR_POSIX_SGI_reserved13	(__NR_POSIX + 306)
+#define __NR_POSIX_SGI_reserved14	(__NR_POSIX + 307)
+#define __NR_POSIX_SGI_reserved15	(__NR_POSIX + 308)
+#define __NR_POSIX_SGI_reserved16	(__NR_POSIX + 309)
+#define __NR_POSIX_SGI_reserved17	(__NR_POSIX + 310)
+#define __NR_POSIX_SGI_reserved18	(__NR_POSIX + 311)
+#define __NR_POSIX_SGI_reserved19	(__NR_POSIX + 312)
+#define __NR_POSIX_SGI_reserved20	(__NR_POSIX + 313)
+#define __NR_POSIX_SGI_reserved21	(__NR_POSIX + 314)
+#define __NR_POSIX_SGI_reserved22	(__NR_POSIX + 315)
+#define __NR_POSIX_SGI_reserved23	(__NR_POSIX + 316)
+#define __NR_POSIX_SGI_reserved24	(__NR_POSIX + 317)
+#define __NR_POSIX_SGI_reserved25	(__NR_POSIX + 318)
+#define __NR_POSIX_SGI_reserved26	(__NR_POSIX + 319)
+
+#endif /* _ASM_RISCOS_SYSCALL_H */
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
new file mode 100644
index 000000000000..31c0c2347f4f
--- /dev/null
+++ b/include/asm-mips/rtc.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-mips/rtc.h 
+ *
+ * (Really an interface for drivers/char/genrtc.c)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Please read the COPYING file for all license details.
+ */
+
+#ifndef _MIPS_RTC_H
+#define _MIPS_RTC_H
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#define RTC_PIE 0x40            /* periodic interrupt enable */
+#define RTC_AIE 0x20            /* alarm interrupt enable */
+#define RTC_UIE 0x10            /* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100      /* battery bad */
+#define RTC_SQWE 0x08           /* enable square-wave output */
+#define RTC_DM_BINARY 0x04      /* all time/date values are BCD if clear */
+#define RTC_24H 0x02            /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01         /* auto switch DST - works f. USA only */
+
+unsigned int get_rtc_time(struct rtc_time *time);
+int set_rtc_time(struct rtc_time *time);
+unsigned int get_rtc_ss(void);
+int get_rtc_pll(struct rtc_pll_info *pll);
+int set_rtc_pll(struct rtc_pll_info *pll);
+
+#endif
+#endif
diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h
new file mode 100644
index 000000000000..22634706e9d5
--- /dev/null
+++ b/include/asm-mips/scatterlist.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_SCATTERLIST_H
+#define __ASM_SCATTERLIST_H
+
+struct scatterlist {
+	struct page *	page;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0x00ffffffUL)
+
+#endif /* __ASM_SCATTERLIST_H */
diff --git a/include/asm-mips/sections.h b/include/asm-mips/sections.h
new file mode 100644
index 000000000000..f7016278b266
--- /dev/null
+++ b/include/asm-mips/sections.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _fdata;
+
+#endif /* _ASM_SECTIONS_H */
diff --git a/include/asm-mips/segment.h b/include/asm-mips/segment.h
new file mode 100644
index 000000000000..92ac001fc483
--- /dev/null
+++ b/include/asm-mips/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_SEGMENT_H */
diff --git a/include/asm-mips/semaphore.h b/include/asm-mips/semaphore.h
new file mode 100644
index 000000000000..c2c97dec661b
--- /dev/null
+++ b/include/asm-mips/semaphore.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996  Linus Torvalds
+ * Copyright (C) 1998, 99, 2000, 01, 04  Ralf Baechle
+ * Copyright (C) 1999, 2000, 01  Silicon Graphics, Inc.
+ * Copyright (C) 2000, 01 MIPS Technologies, Inc.
+ *
+ * In all honesty, little of the old MIPS code left - the PPC64 variant was
+ * just looking nice and portable so I ripped it.  Credits to whoever wrote
+ * it.
+ */
+#ifndef __ASM_SEMAPHORE_H
+#define __ASM_SEMAPHORE_H
+
+/*
+ * Remove spinlock-based RW semaphores; RW semaphore definitions are
+ * now in rwsem.h and we use the generic lib/rwsem.c implementation.
+ * Rework semaphores to use atomic_dec_if_positive.
+ * -- Paul Mackerras (paulus@samba.org)
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	/*
+	 * Note that any negative value of count is equivalent to 0,
+	 * but additionally indicates that some process(es) might be
+	 * sleeping on `wait'.
+	 */
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name, 1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int  __down_interruptible(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+
+	/*
+	 * Try to get the semaphore, take the slow path if we fail.
+	 */
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
+		__down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	return atomic_dec_if_positive(&sem->count) < 0;
+}
+
+static inline void up(struct semaphore * sem)
+{
+	if (unlikely(atomic_inc_return(&sem->count) <= 0))
+		__up(sem);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SEMAPHORE_H */
diff --git a/include/asm-mips/sembuf.h b/include/asm-mips/sembuf.h
new file mode 100644
index 000000000000..7281a4decaa0
--- /dev/null
+++ b/include/asm-mips/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
new file mode 100644
index 000000000000..8a70ff58f760
--- /dev/null
+++ b/include/asm-mips/serial.h
@@ -0,0 +1,444 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#define RS_TABLE_SIZE	64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#ifdef CONFIG_MACH_JAZZ
+#include <asm/jazz.h>
+
+#ifndef CONFIG_OLIVETTI_M700
+   /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
+      exactly which ones ... XXX */
+#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */
+#else
+/* but the M700 isn't such a strange beast */
+#define JAZZ_BASE_BAUD BASE_BAUD
+#endif
+
+#define _JAZZ_SERIAL_INIT(int, base)					\
+	{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
+	  .iomem_base = (u8 *) base, .iomem_reg_shift = 0,			\
+	  .io_type = SERIAL_IO_MEM }
+#define JAZZ_SERIAL_PORT_DEFNS						\
+	_JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE),		\
+	_JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE),
+#else
+#define JAZZ_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MIPS_COBALT
+#include <asm/cobalt/cobalt.h>
+#define COBALT_BASE_BAUD  (18432000 / 16)
+#define COBALT_SERIAL_PORT_DEFNS		\
+	/* UART CLK   PORT  IRQ  FLAGS    */ 		\
+	{ 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS },   /* ttyS0 */
+#else
+#define COBALT_SERIAL_PORT_DEFNS
+#endif
+
+/*
+ * Both Galileo boards have the same UART mappings.
+ */
+#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
+#include <asm/galileo-boards/ev96100.h>
+#include <asm/galileo-boards/ev96100int.h>
+#define EV96100_SERIAL_PORT_DEFNS                                  \
+    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+      .flags = STD_COM_FLAGS,  \
+      .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
+      .io_type = SERIAL_IO_MEM }, \
+    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
+      .flags = STD_COM_FLAGS, \
+      .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
+      .io_type = SERIAL_IO_MEM },
+#else
+#define EV96100_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MIPS_ITE8172
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#include <asm/it8712.h>
+#define ITE_SERIAL_PORT_DEFNS                                  \
+    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+    { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
+      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+    /* Smart Card Reader 0 */ \
+    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
+      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+    /* Smart Card Reader 1 */ \
+    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+#else
+#define ITE_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MIPS_IVR
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#define IVR_SERIAL_PORT_DEFNS                                  \
+    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },         \
+    /* Smart Card Reader 1 */ \
+    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+#else
+#define IVR_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_TOSHIBA_JMR3927
+#include <asm/jmr3927/jmr3927.h>
+#define TXX927_SERIAL_PORT_DEFNS                              \
+    { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT,  \
+      .flags = UART0_FLAGS, .type = 1 },                        \
+    { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT,  \
+      .flags = UART1_FLAGS, .type = 1 },
+#else
+#define TXX927_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_SERIAL_AU1X00
+#include <asm/mach-au1x00/au1000.h>
+#ifdef CONFIG_SOC_AU1000
+#define AU1000_SERIAL_PORT_DEFNS                       \
+    { .baud_base = 0, .port = UART0_ADDR,              \
+      .iomem_base = (unsigned char *)UART0_ADDR,       \
+      .irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART1_ADDR,              \
+      .iomem_base = (unsigned char *)UART1_ADDR,       \
+      .irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART2_ADDR,              \
+      .iomem_base = (unsigned char *)UART2_ADDR,       \
+      .irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART3_ADDR,              \
+      .iomem_base = (unsigned char *)UART3_ADDR,       \
+      .irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },
+#endif
+
+#ifdef CONFIG_SOC_AU1500
+#define AU1000_SERIAL_PORT_DEFNS                       \
+    { .baud_base = 0, .port = UART0_ADDR,              \
+      .iomem_base = (unsigned char *)UART0_ADDR,       \
+      .irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART3_ADDR,              \
+      .iomem_base = (unsigned char *)UART3_ADDR,       \
+      .irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },
+#endif
+
+#ifdef CONFIG_SOC_AU1100
+#define AU1000_SERIAL_PORT_DEFNS                       \
+    { .baud_base = 0, .port = UART0_ADDR,              \
+      .iomem_base = (unsigned char *)UART0_ADDR,       \
+      .irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART1_ADDR,              \
+      .iomem_base = (unsigned char *)UART1_ADDR,       \
+      .irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART3_ADDR,              \
+      .iomem_base = (unsigned char *)UART3_ADDR,       \
+      .irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },
+#endif
+
+#ifdef CONFIG_SOC_AU1550
+#define AU1000_SERIAL_PORT_DEFNS                       \
+    { .baud_base = 0, .port = UART0_ADDR,              \
+      .iomem_base = (unsigned char *)UART0_ADDR,       \
+      .irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART1_ADDR,              \
+      .iomem_base = (unsigned char *)UART1_ADDR,       \
+      .irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART3_ADDR,              \
+      .iomem_base = (unsigned char *)UART3_ADDR,       \
+      .irq = AU1550_UART3_INT,  .flags = STD_COM_FLAGS,\
+      .iomem_reg_shift = 2 },
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#define AU1000_SERIAL_PORT_DEFNS                       \
+    { .baud_base = 0, .port = UART0_ADDR,              \
+      .iomem_base = (unsigned char *)UART0_ADDR,       \
+      .irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },                          \
+    { .baud_base = 0, .port = UART1_ADDR,              \
+      .iomem_base = (unsigned char *)UART1_ADDR,       \
+      .irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \
+      .iomem_reg_shift = 2 },
+#endif
+
+#else
+#define AU1000_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS14 (spare) */ \
+	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS15 (spare) */ \
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else /* CONFIG_SERIAL_MANY_PORTS */
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif /* CONFIG_SERIAL_MANY_PORTS */
+
+#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
+#define STD_SERIAL_PORT_DEFNS
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS		\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#ifdef CONFIG_MOMENCO_JAGUAR_ATX
+/* Ordinary NS16552 duart with a 20MHz crystal.  */
+#define JAGUAR_ATX_UART_CLK	20000000
+#define JAGUAR_ATX_BASE_BAUD	(JAGUAR_ATX_UART_CLK / 16)
+
+#define JAGUAR_ATX_SERIAL1_IRQ	6
+#define JAGUAR_ATX_SERIAL1_BASE	0xfd000023L
+
+#define _JAGUAR_ATX_SERIAL_INIT(int, base)				\
+	{ baud_base: JAGUAR_ATX_BASE_BAUD, irq: int,			\
+	  flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),		\
+	  iomem_base: (u8 *) base, iomem_reg_shift: 2,			\
+	  io_type: SERIAL_IO_MEM }
+#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS				\
+	_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
+#else
+#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MOMENCO_OCELOT_3
+#define OCELOT_3_BASE_BAUD	( 20000000 / 16 )
+#define OCELOT_3_SERIAL_IRQ	6
+#define OCELOT_3_SERIAL_BASE	(signed)0xfd000020
+
+#define _OCELOT_3_SERIAL_INIT(int, base)				\
+	{ baud_base: OCELOT_3_BASE_BAUD, irq: int, 			\
+	  flags: STD_COM_FLAGS,						\
+	  iomem_base: (u8 *) base, iomem_reg_shift: 2,			\
+	  io_type: SERIAL_IO_MEM }
+
+#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS				\
+	_OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE)
+#else
+#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MOMENCO_OCELOT
+/* Ordinary NS16552 duart with a 20MHz crystal.  */
+#define OCELOT_BASE_BAUD ( 20000000 / 16 )
+
+#define OCELOT_SERIAL1_IRQ	4
+#define OCELOT_SERIAL1_BASE	0xe0001020
+
+#define _OCELOT_SERIAL_INIT(int, base)					\
+	{ .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
+	  .iomem_base = (u8 *) base, .iomem_reg_shift = 2,			\
+	  .io_type = SERIAL_IO_MEM }
+#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS				\
+	_OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE)
+#else
+#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MOMENCO_OCELOT_G
+/* Ordinary NS16552 duart with a 20MHz crystal.  */
+#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
+
+#define OCELOT_G_SERIAL1_IRQ	4
+#if 0
+#define OCELOT_G_SERIAL1_BASE	0xe0001020
+#else
+#define OCELOT_G_SERIAL1_BASE	0xfd000020
+#endif
+
+#define _OCELOT_G_SERIAL_INIT(int, base)				\
+	{ .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
+	  .iomem_base = (u8 *) base, .iomem_reg_shift = 2,			\
+	  .io_type = SERIAL_IO_MEM }
+#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS				\
+	_OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
+#else
+#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_MOMENCO_OCELOT_C
+/* Ordinary NS16552 duart with a 20MHz crystal.  */
+#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
+
+#define OCELOT_C_SERIAL1_IRQ	80
+#define OCELOT_C_SERIAL1_BASE	0xfd000020
+
+#define OCELOT_C_SERIAL2_IRQ	81
+#define OCELOT_C_SERIAL2_BASE	0xfd000000
+
+#define _OCELOT_C_SERIAL_INIT(int, base)				\
+	{ .baud_base		= OCELOT_C_BASE_BAUD,			\
+	  .irq			= (int),				\
+	  .flags		= STD_COM_FLAGS,			\
+	  .iomem_base		= (u8 *) base,				\
+	  .iomem_reg_shift	= 2,					\
+	  .io_type		= SERIAL_IO_MEM				\
+	 }
+#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS				\
+	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
+	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
+#else
+#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_DDB5477
+#include <asm/ddb5xxx/ddb5477.h>
+#define DDB5477_SERIAL_PORT_DEFNS                                       \
+        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, 		\
+	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, 	\
+	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},		\
+        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, 		\
+	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, 	\
+	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},
+#else
+#define DDB5477_SERIAL_PORT_DEFNS
+#endif
+
+#ifdef CONFIG_SGI_IP32
+/*
+ * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory
+ * They are initialized in ip32_setup
+ */
+#define IP32_SERIAL_PORT_DEFNS				\
+        {},{},
+#else
+#define IP32_SERIAL_PORT_DEFNS
+#endif /* CONFIG_SGI_IP32 */
+
+#define SERIAL_PORT_DFNS				\
+	COBALT_SERIAL_PORT_DEFNS			\
+	DDB5477_SERIAL_PORT_DEFNS			\
+	EV96100_SERIAL_PORT_DEFNS			\
+	EXTRA_SERIAL_PORT_DEFNS				\
+	HUB6_SERIAL_PORT_DFNS				\
+	IP32_SERIAL_PORT_DEFNS                          \
+	ITE_SERIAL_PORT_DEFNS           		\
+	IVR_SERIAL_PORT_DEFNS           		\
+	JAZZ_SERIAL_PORT_DEFNS				\
+	STD_SERIAL_PORT_DEFNS				\
+	MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS		\
+	MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS		\
+	MOMENCO_OCELOT_SERIAL_PORT_DEFNS		\
+	MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS		\
+	TXX927_SERIAL_PORT_DEFNS                        \
+	AU1000_SERIAL_PORT_DEFNS
+
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h
new file mode 100644
index 000000000000..737fa4a6912e
--- /dev/null
+++ b/include/asm-mips/setup.h
@@ -0,0 +1,8 @@
+#ifdef __KERNEL__
+#ifndef _MIPS_SETUP_H
+#define _MIPS_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif /* __SETUP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-mips/sgi/gio.h b/include/asm-mips/sgi/gio.h
new file mode 100644
index 000000000000..a38d66f99872
--- /dev/null
+++ b/include/asm-mips/sgi/gio.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * gio.h: Definitions for SGI GIO bus
+ *
+ * Copyright (C) 2002 Ladislav Michl
+ */
+
+#ifndef _SGI_GIO_H
+#define _SGI_GIO_H
+
+/*
+ * GIO bus addresses
+ *
+ * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
+ * three physical connectors, but only two slots, GFX and EXP0.
+ * 
+ * There is 10MB of GIO address space for GIO64 slot devices
+ * slot#   slot type address range            size
+ * -----   --------- ----------------------- -----
+ *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
+ *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
+ *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
+ *
+ * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
+ * into the HPC address space.
+ *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
+ *
+ * Following space is reserved and unused
+ *   -     RESERVED  0x18000000 - 0x1effffff 112MB
+ *
+ * GIO bus IDs
+ *
+ * Each GIO bus device identifies itself to the system by answering a
+ * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
+ * than 128 are 8 bits long, with the most significant 24 bits read from
+ * the slot undefined.
+ *
+ * 32-bit IDs are divided into
+ *	bits 0:6        the product ID; ranges from 0x00 to 0x7F.
+ *	bit 7		0=GIO Product ID is 8 bits wide
+ *			1=GIO Product ID is 32 bits wide.
+ *	bits 8:15       manufacturer version for the product.
+ *	bit 16		0=GIO32 and GIO32-bis, 1=GIO64.
+ *	bit 17		0=no ROM present
+ *			1=ROM present on this board AND next three words
+ *			space define the ROM.
+ *	bits 18:31	up to manufacturer.
+ *
+ * IDs above 0x50/0xd0 are of 3rd party boards.
+ *
+ * 8-bit IDs
+ *	0x01		XPI low cost FDDI
+ *	0x02		GTR TokenRing
+ *	0x04		Synchronous ISDN
+ *	0x05		ATM board [*]
+ *	0x06		Canon Interface
+ *	0x07		16 bit SCSI Card [*]
+ *	0x08		JPEG (Double Wide)
+ *	0x09		JPEG (Single Wide)
+ *	0x0a		XPI mez. FDDI device 0
+ *	0x0b		XPI mez. FDDI device 1
+ *	0x0c		SMPTE 259M Video [*]
+ *	0x0d		Babblefish Compression [*]
+ *	0x0e		E-Plex 8-port Ethernet
+ *	0x30		Lyon Lamb IVAS
+ *	0xb8		GIO 100BaseTX Fast Ethernet (gfe)
+ *
+ * [*] Device provide 32-bit ID.
+ *
+ */
+
+#define GIO_ID(x)		(x & 0x7f)
+#define GIO_32BIT_ID		0x80
+#define GIO_REV(x)		((x >> 8) & 0xff)
+#define GIO_64BIT_IFACE		0x10000
+#define GIO_ROM_PRESENT		0x20000
+#define GIO_VENDOR_CODE(x)	((x >> 18) & 0x3fff)
+
+#define GIO_SLOT_GFX_BASE	0x1f000000
+#define GIO_SLOT_EXP0_BASE	0x1f400000
+#define GIO_SLOT_EXP1_BASE	0x1f600000
+
+#endif /* _SGI_GIO_H */
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h
new file mode 100644
index 000000000000..a5b988d7327a
--- /dev/null
+++ b/include/asm-mips/sgi/hpc3.h
@@ -0,0 +1,317 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * hpc3.h: Definitions for SGI HPC3 controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1998 Ralf Baechle
+ */
+
+#ifndef _SGI_HPC3_H
+#define _SGI_HPC3_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+/* An HPC DMA descriptor. */
+struct hpc_dma_desc {
+	u32 pbuf;	/* physical address of data buffer */
+	u32 cntinfo;	/* counter and info bits */
+#define HPCDMA_EOX	0x80000000 /* last desc in chain for tx */
+#define HPCDMA_EOR	0x80000000 /* last desc in chain for rx */
+#define HPCDMA_EOXP	0x40000000 /* end of packet for tx */
+#define HPCDMA_EORP	0x40000000 /* end of packet for rx */
+#define HPCDMA_XIE	0x20000000 /* irq generated when at end of this desc */
+#define HPCDMA_XIU	0x01000000 /* Tx buffer in use by CPU. */
+#define HPCDMA_EIPC	0x00ff0000 /* SEEQ ethernet special xternal bytecount */
+#define HPCDMA_ETXD	0x00008000 /* set to one by HPC when packet tx'd */
+#define HPCDMA_OWN	0x00004000 /* Denotes ring buffer ownership on rx */
+#define HPCDMA_BCNT	0x00003fff /* size in bytes of this dma buffer */
+
+	u32 pnext;	/* paddr of next hpc_dma_desc if any */
+};
+
+/* The set of regs for each HPC3 PBUS DMA channel. */
+struct hpc3_pbus_dmacregs {
+	volatile u32 pbdma_bptr;	/* pbus dma channel buffer ptr */
+	volatile u32 pbdma_dptr;	/* pbus dma channel desc ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 pbdma_ctrl;	/* pbus dma channel control register has
+					 * copletely different meaning for read
+					 * compared with write */
+	/* read */
+#define HPC3_PDMACTRL_INT	0x00000001 /* interrupt (cleared after read) */
+#define HPC3_PDMACTRL_ISACT	0x00000002 /* channel active */
+	/* write */
+#define HPC3_PDMACTRL_SEL	0x00000002 /* little endian transfer */
+#define HPC3_PDMACTRL_RCV	0x00000004 /* direction is receive */
+#define HPC3_PDMACTRL_FLSH	0x00000008 /* enable flush for receive DMA */
+#define HPC3_PDMACTRL_ACT	0x00000010 /* start dma transfer */
+#define HPC3_PDMACTRL_LD	0x00000020 /* load enable for ACT */
+#define HPC3_PDMACTRL_RT	0x00000040 /* Use realtime GIO bus servicing */
+#define HPC3_PDMACTRL_HW	0x0000ff00 /* DMA High-water mark */
+#define HPC3_PDMACTRL_FB	0x003f0000 /* Ptr to beginning of fifo */
+#define HPC3_PDMACTRL_FE	0x3f000000 /* Ptr to end of fifo */
+
+	u32 _unused1[0x1000/4 - 1];	/* padding */
+};
+
+/* The HPC3 SCSI registers, this does not include external ones. */
+struct hpc3_scsiregs {
+	volatile u32 cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 ndptr;	/* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 bcd;	/* byte count info */
+#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
+#define HPC3_SBCD_XIE     0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX     0x00008000 /* Indicates this is last buf in chain */
+
+	volatile u32 ctrl;    /* control register */
+#define HPC3_SCTRL_IRQ    0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
+#define HPC3_SCTRL_DIR    0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_FLUSH  0x08 /* Tells HPC3 to flush scsi fifos */
+#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
+#define HPC3_SCTRL_AMASK  0x20 /* DMA active inhibits PIO */
+#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
+#define HPC3_SCTRL_PERR   0x80 /* Bad parity on HPC3 iface to scsi controller */
+
+	volatile u32 gfptr;	/* current GIO fifo ptr */
+	volatile u32 dfptr;	/* current device fifo ptr */
+	volatile u32 dconfig;	/* DMA configuration register */
+#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
+#define HPC3_SDCFG_D1   0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2   0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3   0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
+#define HPC3_SDCFG_HW   0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
+#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
+#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
+#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
+
+	volatile u32 pconfig;	/* PIO configuration register */
+#define HPC3_SPCFG_P3   0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W  0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R  0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1   0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW   0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
+#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
+#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
+
+	u32 _unused1[0x1000/4 - 6];	/* padding */
+};
+
+/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
+struct hpc3_ethregs {
+	/* Receiver registers. */
+	volatile u32 rx_cbptr;   /* current dma buffer ptr, diagnostic use only */
+	volatile u32 rx_ndptr;   /* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 rx_bcd;	/* byte count info */
+#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
+#define HPC3_ERXBCD_XIE     0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX     0x80000000 /* flags this as end of descriptor chain */
+
+	volatile u32 rx_ctrl;	/* control register */
+#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
+#define HPC3_ERXCTRL_STAT6  0x00000040 /* Rdonly irq status */
+#define HPC3_ERXCTRL_STAT7  0x00000080 /* Rdonlt old/new status bit from Seeq */
+#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
+#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
+#define HPC3_ERXCTRL_AMASK  0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
+#define HPC3_ERXCTRL_RBO    0x00000800 /* Receive buffer overflow if set to 1 */
+
+	volatile u32 rx_gfptr;	/* current GIO fifo ptr */
+	volatile u32 rx_dfptr;	/* current device fifo ptr */
+	u32 _unused1;		/* padding */
+	volatile u32 rx_reset;	/* reset register */
+#define HPC3_ERXRST_CRESET 0x1	/* Reset dma channel and external controller */
+#define HPC3_ERXRST_CLRIRQ 0x2	/* Clear channel interrupt */
+#define HPC3_ERXRST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
+
+	volatile u32 rx_dconfig;	/* DMA configuration register */
+#define HPC3_ERXDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_ERXDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_ERXDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_ERXDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
+#define HPC3_ERXDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
+#define HPC3_ERXDCFG_PTO   0x30000 /* Programmed timeout value for above two */
+
+	volatile u32 rx_pconfig;	/* PIO configuration register */
+#define HPC3_ERXPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_ERXPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_ERXPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_ERXPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
+
+	u32 _unused2[0x1000/4 - 8];	/* padding */
+
+	/* Transmitter registers. */
+	volatile u32 tx_cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 tx_ndptr;	/* next dma descriptor ptr */
+	u32 _unused3[0x1000/4 - 2];	/* padding */
+	volatile u32 tx_bcd;		/* byte count info */
+#define HPC3_ETXBCD_BCNTMSK 0x00003fff	/* bytes to be read from memory */
+#define HPC3_ETXBCD_ESAMP   0x10000000	/* if set, too late to add descriptor */
+#define HPC3_ETXBCD_XIE     0x20000000	/* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP     0x40000000	/* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX     0x80000000	/* This buf is the end of desc chain */
+
+	volatile u32 tx_ctrl;		/* control register */
+#define HPC3_ETXCTRL_STAT30 0x0000000f	/* Rdonly copy of seeq tx stat reg */
+#define HPC3_ETXCTRL_STAT4  0x00000010	/* Indicate late collision occurred */
+#define HPC3_ETXCTRL_STAT75 0x000000e0	/* Rdonly irq status from seeq */
+#define HPC3_ETXCTRL_ENDIAN 0x00000100	/* DMA channel endian mode, 1=little 0=big */
+#define HPC3_ETXCTRL_ACTIVE 0x00000200	/* DMA tx channel is active */
+#define HPC3_ETXCTRL_AMASK  0x00000400	/* Indicates ACTIVE inhibits PIO's */
+
+	volatile u32 tx_gfptr;		/* current GIO fifo ptr */
+	volatile u32 tx_dfptr;		/* current device fifo ptr */
+	u32 _unused4[0x1000/4 - 4];	/* padding */
+};
+
+struct hpc3_regs {
+	/* First regs for the PBUS 8 dma channels. */
+	struct hpc3_pbus_dmacregs pbdma[8];
+
+	/* Now the HPC scsi registers, we get two scsi reg sets. */
+	struct hpc3_scsiregs scsi_chan0, scsi_chan1;
+
+	/* The SEEQ hpc3 ethernet dma/control registers. */
+	struct hpc3_ethregs ethregs;
+
+	/* Here are where the hpc3 fifo's can be directly accessed
+	 * via PIO accesses.  Under normal operation we never stick
+	 * our grubby paws in here so it's just padding. */
+	u32 _unused0[0x18000/4];
+
+	/* HPC3 irq status regs.  Due to a peculiar bug you need to
+	 * look at two different register addresses to get at all of
+	 * the status bits.  The first reg can only reliably report
+	 * bits 4:0 of the status, and the second reg can only
+	 * reliably report bits 9:5 of the hpc3 irq status.  I told
+	 * you it was a peculiar bug. ;-)
+	 */
+	volatile u32 istat0;		/* Irq status, only bits <4:0> reliable. */
+#define HPC3_ISTAT_PBIMASK	0x0ff	/* irq bits for pbus devs 0 --> 7 */
+#define HPC3_ISTAT_SC0MASK	0x100	/* irq bit for scsi channel 0 */
+#define HPC3_ISTAT_SC1MASK	0x200	/* irq bit for scsi channel 1 */
+
+	volatile u32 gio_misc;		/* GIO misc control bits. */
+#define HPC3_GIOMISC_ERTIME	0x1	/* Enable external timer real time. */
+#define HPC3_GIOMISC_DENDIAN	0x2	/* dma descriptor endian, 1=lit 0=big */
+
+	volatile u32 eeprom;		/* EEPROM data reg. */
+#define HPC3_EEPROM_EPROT	0x01	/* Protect register enable */
+#define HPC3_EEPROM_CSEL	0x02	/* Chip select */
+#define HPC3_EEPROM_ECLK	0x04	/* EEPROM clock */
+#define HPC3_EEPROM_DATO	0x08	/* Data out */
+#define HPC3_EEPROM_DATI	0x10	/* Data in */
+
+	volatile u32 istat1;		/* Irq status, only bits <9:5> reliable. */
+	volatile u32 bestat;		/* Bus error interrupt status reg. */
+#define HPC3_BESTAT_BLMASK	0x000ff	/* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE	0x00100	/* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_PIDSHIFT	9
+#define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
+
+	u32 _unused1[0x14000/4 - 5];	/* padding */
+	
+	/* Now direct PIO per-HPC3 peripheral access to external regs. */
+	volatile u32 scsi0_ext[256];	/* SCSI channel 0 external regs */
+	u32 _unused2[0x7c00/4];
+	volatile u32 scsi1_ext[256];	/* SCSI channel 1 external regs */
+	u32 _unused3[0x7c00/4];
+	volatile u32 eth_ext[320];	/* Ethernet external registers */
+	u32 _unused4[0x3b00/4];
+
+	/* Per-peripheral device external registers and DMA/PIO control. */
+	volatile u32 pbus_extregs[16][256];
+	volatile u32 pbus_dmacfg[8][128];
+	/* Cycles to spend in D3 for reads */
+#define HPC3_DMACFG_D3R_MASK		0x00000001
+#define HPC3_DMACFG_D3R_SHIFT		0
+	/* Cycles to spend in D4 for reads */
+#define HPC3_DMACFG_D4R_MASK		0x0000001e
+#define HPC3_DMACFG_D4R_SHIFT		1
+	/* Cycles to spend in D5 for reads */
+#define HPC3_DMACFG_D5R_MASK		0x000001e0
+#define HPC3_DMACFG_D5R_SHIFT		5
+	/* Cycles to spend in D3 for writes */
+#define HPC3_DMACFG_D3W_MASK		0x00000200
+#define HPC3_DMACFG_D3W_SHIFT		9
+	/* Cycles to spend in D4 for writes */
+#define HPC3_DMACFG_D4W_MASK		0x00003c00
+#define HPC3_DMACFG_D4W_SHIFT		10
+	/* Cycles to spend in D5 for writes */
+#define HPC3_DMACFG_D5W_MASK		0x0003c000
+#define HPC3_DMACFG_D5W_SHIFT		14
+	/* Enable 16-bit DMA access mode */
+#define HPC3_DMACFG_DS16		0x00040000
+	/* Places halfwords on high 16 bits of bus */
+#define HPC3_DMACFG_EVENHI		0x00080000
+	/* Make this device real time */
+#define HPC3_DMACFG_RTIME		0x00200000
+	/* 5 bit burst count for DMA device */
+#define HPC3_DMACFG_BURST_MASK		0x07c00000
+#define HPC3_DMACFG_BURST_SHIFT	22
+	/* Use live pbus_dreq unsynchronized signal */
+#define HPC3_DMACFG_DRQLIVE		0x08000000
+	volatile u32 pbus_piocfg[16][64];
+	/* Cycles to spend in P2 state for reads */
+#define HPC3_PIOCFG_P2R_MASK		0x00001
+#define HPC3_PIOCFG_P2R_SHIFT		0
+	/* Cycles to spend in P3 state for reads */
+#define HPC3_PIOCFG_P3R_MASK		0x0001e
+#define HPC3_PIOCFG_P3R_SHIFT		1
+	/* Cycles to spend in P4 state for reads */
+#define HPC3_PIOCFG_P4R_MASK		0x001e0
+#define HPC3_PIOCFG_P4R_SHIFT		5
+	/* Cycles to spend in P2 state for writes */
+#define HPC3_PIOCFG_P2W_MASK		0x00200
+#define HPC3_PIOCFG_P2W_SHIFT		9
+	/* Cycles to spend in P3 state for writes */
+#define HPC3_PIOCFG_P3W_MASK		0x03c00
+#define HPC3_PIOCFG_P3W_SHIFT		10
+	/* Cycles to spend in P4 state for writes */
+#define HPC3_PIOCFG_P4W_MASK		0x3c000
+#define HPC3_PIOCFG_P4W_SHIFT		14
+	/* Enable 16-bit PIO accesses */
+#define HPC3_PIOCFG_DS16		0x40000
+	/* Place even address bits in bits <15:8> */
+#define HPC3_PIOCFG_EVENHI		0x80000
+
+	/* PBUS PROM control regs. */
+	volatile u32 pbus_promwe;	/* PROM write enable register */
+#define HPC3_PROM_WENAB	0x1	/* Enable writes to the PROM */
+
+	u32 _unused5[0x0800/4 - 1];
+	volatile u32 pbus_promswap;	/* Chip select swap reg */
+#define HPC3_PROM_SWAP	0x1	/* invert GIO addr bit to select prom0 or prom1 */
+
+	u32 _unused6[0x0800/4 - 1];
+	volatile u32 pbus_gout;	/* PROM general purpose output reg */
+#define HPC3_PROM_STAT	0x1	/* General purpose status bit in gout */
+
+	u32 _unused7[0x1000/4 - 1];
+	volatile u32 rtcregs[14];	/* Dallas clock registers */
+	u32 _unused8[50];
+	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
+};
+
+/* 
+ * It is possible to have two HPC3's within the address space on
+ * one machine, though only having one is more likely on an Indy.
+ */
+extern struct hpc3_regs *hpc3c0, *hpc3c1;
+#define HPC3_CHIP0_BASE		0x1fb80000	/* physical */
+#define HPC3_CHIP1_BASE		0x1fb00000	/* physical */
+
+extern void sgihpc_init(void);
+
+#endif /* _SGI_HPC3_H */
diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h
new file mode 100644
index 000000000000..169187f53fbc
--- /dev/null
+++ b/include/asm-mips/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/* 
+ * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+	u8 _ctrl1[3];
+	volatile u8 ctrl1;
+	u8 _data1[3];
+	volatile u8 data1;
+	u8 _ctrl2[3];
+	volatile u8 ctrl2;
+	u8 _data2[3];
+	volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _command[3];
+	volatile u8 command;
+};
+
+struct sgint_regs {
+	u8 _istat0[3];
+	volatile u8 istat0;		/* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL	0x01
+#define SGINT_ISTAT0_SCSI0	0x02
+#define SGINT_ISTAT0_SCSI1	0x04
+#define SGINT_ISTAT0_ENET	0x08
+#define SGINT_ISTAT0_GFXDMA	0x10
+#define SGINT_ISTAT0_PPORT	0x20
+#define SGINT_ISTAT0_HPC2	0x40
+#define SGINT_ISTAT0_LIO2	0x80
+	u8 _imask0[3];
+	volatile u8 imask0;		/* Interrupt mask zero */
+	u8 _istat1[3];
+	volatile u8 istat1;		/* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI	0x01
+#define SGINT_ISTAT1_PWR	0x02
+#define SGINT_ISTAT1_ISDNH	0x04
+#define SGINT_ISTAT1_LIO3	0x08
+#define SGINT_ISTAT1_HPC3	0x10
+#define SGINT_ISTAT1_AFAIL	0x20
+#define SGINT_ISTAT1_VIDEO	0x40
+#define SGINT_ISTAT1_GIO2	0x80
+	u8 _imask1[3];
+	volatile u8 imask1;		/* Interrupt mask one */
+	u8 _vmeistat[3];
+	volatile u8 vmeistat;		/* VME interrupt status */
+	u8 _cmeimask0[3];
+	volatile u8 cmeimask0;		/* VME interrupt mask zero */
+	u8 _cmeimask1[3];
+	volatile u8 cmeimask1;		/* VME interrupt mask one */
+	u8 _cmepol[3];
+	volatile u8 cmepol;		/* VME polarity */
+	u8 _tclear[3];
+	volatile u8 tclear;
+	u8 _errstat[3];
+	volatile u8 errstat;	/* Error status reg, reserved on INT2 */
+	u32 _unused0[2];
+	u8 _tcnt0[3];
+	volatile u8 tcnt0;		/* counter 0 */
+	u8 _tcnt1[3];
+	volatile u8 tcnt1;		/* counter 1 */
+	u8 _tcnt2[3];
+	volatile u8 tcnt2;		/* counter 2 */
+	u8 _tcword[3];
+	volatile u8 tcword;		/* control word */
+#define SGINT_TCWORD_BCD	0x01	/* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK	0x0e	/* Mode bitmask. */
+#define SGINT_TCWORD_MITC	0x00	/* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS	0x02	/* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN	0x04	/* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN	0x06	/* Square wave generator mode */
+#define SGINT_TCWORD_MSWST	0x08	/* Software strobe */
+#define SGINT_TCWORD_MHWST	0x0a	/* Hardware strobe */
+#define SGINT_TCWORD_CMASK	0x30	/* Command mask */
+#define SGINT_TCWORD_CLAT	0x00	/* Latch command */
+#define SGINT_TCWORD_CLSB	0x10	/* LSB read/write */
+#define SGINT_TCWORD_CMSB	0x20	/* MSB read/write */
+#define SGINT_TCWORD_CALL	0x30	/* Full counter read/write */
+#define SGINT_TCWORD_CNT0	0x00	/* Select counter zero */
+#define SGINT_TCWORD_CNT1	0x40	/* Select counter one */
+#define SGINT_TCWORD_CNT2	0x80	/* Select counter two */
+#define SGINT_TCWORD_CRBCK	0xc0	/* Readback command */
+};
+
+/*
+ * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK	1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER	((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+	struct pi1_regs pport;
+	u32 _unused0[2];
+	struct sgioc_uart_regs uart;
+	struct sgioc_keyb_regs kbdmouse;
+	u8 _gcsel[3];
+	volatile u8 gcsel;
+	u8 _genctrl[3];
+	volatile u8 genctrl;
+	u8 _panel[3];
+	volatile u8 panel;
+#define SGIOC_PANEL_POWERON	0x01
+#define SGIOC_PANEL_POWERINTR	0x02
+#define SGIOC_PANEL_VOLDNINTR	0x10
+#define SGIOC_PANEL_VOLDNHOLD	0x20
+#define SGIOC_PANEL_VOLUPINTR	0x40
+#define SGIOC_PANEL_VOLUPHOLD	0x80
+	u32 _unused1;
+	u8 _sysid[3];
+	volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE	0x01
+#define SGIOC_SYSID_BOARDREV(x)	((x & 0xe0) > 5) 
+#define SGIOC_SYSID_CHIPREV(x)	((x & 0x1e) > 1)
+	u32 _unused2;
+	u8 _read[3];
+	volatile u8 read;
+	u32 _unused3;
+	u8 _dmasel[3];
+	volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ	0x00	/* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB	0x01	/* enable isdn B */
+#define SGIOC_DMASEL_ISDNA	0x02	/* enable isdn A */
+#define SGIOC_DMASEL_PPORT	0x04	/* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ	0x10	/* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT	0x20	/* use external serial clock */
+	u32 _unused4;
+	u8 _reset[3];
+	volatile u8 reset;
+#define SGIOC_RESET_PPORT	0x01	/* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE	0x02	/* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA	0x04	/* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN	0x08	/* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF	0x10	/* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF	0x20	/* guiness: turn led off (green, else amber) */
+	u32 _unused5;
+	u8 _write[3];
+	volatile u8 write;
+#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshhold */
+#define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE	0x10	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE	0x20	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO		0x40	/* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI		0x80	/* 1=5.25V 0=+5V */
+	u32 _unused6;
+	struct sgint_regs int3;
+	u32 _unused7[16];
+	volatile u32 extio;		/* FullHouse only */
+#define EXTIO_S0_IRQ_3		0x8000	/* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2		0x4000	/* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1		0x2000	/* S0: gfx.int */
+#define EXTIO_S0_RETRACE	0x1000
+#define EXTIO_SG_IRQ_3		0x0800	/* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2		0x0400	/* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1		0x0200	/* SG: gfx.int */
+#define EXTIO_SG_RETRACE	0x0100
+#define EXTIO_GIO_33MHZ		0x0080
+#define EXTIO_EISA_BUSERR	0x0040
+#define EXTIO_MC_BUSERR		0x0020
+#define EXTIO_HPC3_BUSERR	0x0010
+#define EXTIO_S0_STAT_1		0x0008
+#define EXTIO_S0_STAT_0		0x0004
+#define EXTIO_SG_STAT_1		0x0002
+#define EXTIO_SG_STAT_0		0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif
diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h
new file mode 100644
index 000000000000..97d73adb4e40
--- /dev/null
+++ b/include/asm-mips/sgi/ip22.h
@@ -0,0 +1,77 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ip22.h: Definitions for SGI IP22 machines
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ */
+
+#ifndef _SGI_IP22_H
+#define _SGI_IP22_H
+
+/* 
+ * These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
+ * are not supported this way. Driver is supposed to allocate HPC/MC
+ * interrupt as shareable and then look to proper status bit (see
+ * HAL2 driver). This will prevent many complications, trust me ;-)
+ */
+
+#include <asm/sgi/ioc.h>
+
+#define SGINT_EISA	0	/* 16 EISA irq levels (Indigo2) */
+#define SGINT_CPU	16	/* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0	24	/* 8 local0 irq levels */
+#define SGINT_LOCAL1	32	/* 8 local1 irq levels */
+#define SGINT_LOCAL2	40	/* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3	48	/* 8 local3 vectored irq levels */
+#define SGINT_END	56	/* End of 'spaces' */
+
+/*
+ * Individual interrupt definitions for the Indy and Indigo2
+ */
+
+#define SGI_SOFT_0_IRQ	SGINT_CPU + 0
+#define SGI_SOFT_1_IRQ	SGINT_CPU + 1
+#define SGI_LOCAL_0_IRQ	SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ	SGINT_CPU + 3
+#define SGI_8254_0_IRQ	SGINT_CPU + 4
+#define SGI_8254_1_IRQ	SGINT_CPU + 5
+#define SGI_BUSERR_IRQ	SGINT_CPU + 6
+#define SGI_TIMER_IRQ	SGINT_CPU + 7
+
+#define SGI_FIFO_IRQ	SGINT_LOCAL0 + 0	/* FIFO full */
+#define SGI_GIO_0_IRQ	SGI_FIFO_IRQ		/* GIO-0 */
+#define SGI_WD93_0_IRQ	SGINT_LOCAL0 + 1	/* 1st onboard WD93 */
+#define SGI_WD93_1_IRQ	SGINT_LOCAL0 + 2	/* 2nd onboard WD93 */
+#define SGI_ENET_IRQ	SGINT_LOCAL0 + 3	/* onboard ethernet */
+#define SGI_MCDMA_IRQ	SGINT_LOCAL0 + 4	/* MC DMA done */
+#define SGI_PARPORT_IRQ	SGINT_LOCAL0 + 5	/* Parallel port */
+#define SGI_GIO_1_IRQ	SGINT_LOCAL0 + 6	/* GE / GIO-1 / 2nd-HPC */
+#define SGI_MAP_0_IRQ	SGINT_LOCAL0 + 7	/* Mappable interrupt 0 */
+
+#define SGI_GPL0_IRQ	SGINT_LOCAL1 + 0	/* General Purpose LOCAL1_N<0> */
+#define SGI_PANEL_IRQ	SGINT_LOCAL1 + 1	/* front panel */
+#define SGI_GPL2_IRQ	SGINT_LOCAL1 + 2	/* General Purpose LOCAL1_N<2> */
+#define SGI_MAP_1_IRQ	SGINT_LOCAL1 + 3	/* Mappable interrupt 1 */
+#define SGI_HPCDMA_IRQ	SGINT_LOCAL1 + 4	/* HPC DMA done */
+#define SGI_ACFAIL_IRQ	SGINT_LOCAL1 + 5	/* AC fail */
+#define SGI_VINO_IRQ	SGINT_LOCAL1 + 6	/* Indy VINO */
+#define SGI_GIO_2_IRQ	SGINT_LOCAL1 + 7	/* Vert retrace / GIO-2 */
+
+/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */
+#define SGI_VERT_IRQ	SGINT_LOCAL2 + 0	/* INT3: newport vertical status */
+#define SGI_EISA_IRQ	SGINT_LOCAL2 + 3	/* EISA interrupts */
+#define SGI_KEYBD_IRQ	SGINT_LOCAL2 + 4	/* keyboard */
+#define SGI_SERIAL_IRQ	SGINT_LOCAL2 + 5	/* onboard serial */
+
+#define ip22_is_fullhouse()	(sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
+
+extern unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg);
+extern unsigned short ip22_nvram_read(int reg);
+
+#endif
diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h
new file mode 100644
index 000000000000..fd98f930607c
--- /dev/null
+++ b/include/asm-mips/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+	u32 _unused0;
+	volatile u32 cpuctrl0;	/* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS	0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH	0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO	0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM	0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU	0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG	0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT	0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET	0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK	0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD	0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB	0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP	0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR	0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM	0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN	0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM	0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR	0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB	0x08000000 /* Allow GIO back to back writes */
+	u32 _unused1;
+	volatile u32 cpuctrl1;	/* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO	0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC	0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC	0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0	0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0	0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1	0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1	0x00020000 /* Little endian EXP1 */
+
+	u32 _unused2;
+	volatile u32 watchdogt;	/* Watchdog reg rdonly, write clears */
+
+	u32 _unused3;
+	volatile u32 systemid;	/* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV	0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT	0x00000010 /* Indicates presence of EISA bus */
+
+	u32 _unused4[3];
+	volatile u32 divider;	/* Divider reg for RPSS */
+
+	u32 _unused5;
+	volatile u32 eeprom;	/* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE	0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL	0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK	0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO	0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI	0x00000010 /* Serial EEPROM data-in */
+
+	u32 _unused6[3];
+	volatile u32 rcntpre;	/* Preload refresh counter */
+
+	u32 _unused7;
+	volatile u32 rcounter;	/* Readonly refresh counter */
+
+	u32 _unused8[13];
+	volatile u32 giopar;	/* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64	0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64	0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064	0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164	0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64	0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264	0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX	0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0	0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1	0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA	0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS	0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX	0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0	0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1	0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0	0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1	0x00008000 /* EXP(slot1) has pipeline attr */
+
+	u32 _unused9;
+	volatile u32 cputp;	/* CPU bus arb time period */
+
+	u32 _unused10[3];
+	volatile u32 lbursttp;	/* Time period for long bursts */
+
+	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+	 * be the same size. The size encoding for supported SIMMs is bellow */
+	u32 _unused11[9];
+	volatile u32 mconfig0;	/* Memory config register zero */
+	u32 _unused12;
+	volatile u32 mconfig1;	/* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR	0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK	0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID	0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS	0x00004000 /* Number of subbanks */
+
+	u32 _unused13;
+	volatile u32 cmacc;        /* Mem access config for CPU */
+	u32 _unused14;
+	volatile u32 gmacc;        /* Mem access config for GIO */
+
+	/* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG	0x20000000 /* 512MB home for alias */
+
+	/* Error address/status regs from GIO and CPU perspectives. */
+	u32 _unused15;
+	volatile u32 cerr;	/* Error address reg for CPU */
+	u32 _unused16;
+	volatile u32 cstat;	/* Status reg for CPU */
+#define SGIMC_CSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR		0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR	0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR	0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR	0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA	0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK	0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR	(SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+	u32 _unused17;
+	volatile u32 gerr;	/* Error address reg for GIO */
+	u32 _unused18;
+	volatile u32 gstat;	/* Status reg for GIO */
+#define SGIMC_GSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR		0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME	0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM	0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR	0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC		0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD	0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR	0x00008000 /* write data parity on pio */
+
+	/* Special hard bus locking registers. */
+	u32 _unused19;
+	volatile u32 syssembit;		/* Uni-bit system semaphore */
+	u32 _unused20;
+	volatile u32 mlock;		/* Global GIO memory access lock */
+	u32 _unused21;
+	volatile u32 elock;		/* Locks EISA from GIO accesses */
+
+	/* GIO dma control registers. */
+	u32 _unused22[15];
+	volatile u32 gio_dma_trans;	/* DMA mask to translation GIO addrs */
+	u32 _unused23;
+	volatile u32 gio_dma_sbits;	/* DMA GIO addr substitution bits */
+	u32 _unused24;
+	volatile u32 dma_intr_cause;	/* DMA IRQ cause indicator bits */
+	u32 _unused25;
+	volatile u32 dma_ctrl;		/* Main DMA control reg */
+
+	/* DMA TLB entry 0 */
+	u32 _unused26[5];
+	volatile u32 dtlb_hi0;
+	u32 _unused27;
+	volatile u32 dtlb_lo0;
+
+	/* DMA TLB entry 1 */
+	u32 _unused28;
+	volatile u32 dtlb_hi1;
+	u32 _unused29;
+	volatile u32 dtlb_lo1;
+
+	/* DMA TLB entry 2 */
+	u32 _unused30;
+	volatile u32 dtlb_hi2;
+	u32 _unused31;
+	volatile u32 dtlb_lo2;
+
+	/* DMA TLB entry 3 */
+	u32 _unused32;
+	volatile u32 dtlb_hi3;
+	u32 _unused33;
+	volatile u32 dtlb_lo3;
+	
+	u32 _unused34[0x0392];
+	
+	u32 _unused35;
+	volatile u32 rpsscounter;	/* Chirps at 100ns */
+
+	u32 _unused36[0x1000/4-2*4];
+	
+	u32 _unused37;
+	volatile u32 maddronly;		/* Address DMA goes at */
+	u32 _unused38;
+	volatile u32 maddrpdeflts;	/* Same as above, plus set defaults */
+	u32 _unused39;
+	volatile u32 dmasz;		/* DMA count */
+	u32 _unused40;
+	volatile u32 ssize;		/* DMA stride size */
+	u32 _unused41;
+	volatile u32 gmaddronly;	/* Set GIO DMA but don't start trans */
+	u32 _unused42;
+	volatile u32 dmaddnpgo;		/* Set GIO DMA addr + start transfer */
+	u32 _unused43;
+	volatile u32 dmamode;		/* DMA mode config bit settings */
+	u32 _unused44;
+	volatile u32 dmaccount;		/* Zoom and byte count for DMA */
+	u32 _unused45;
+	volatile u32 dmastart;		/* Pedal to the metal. */
+	u32 _unused46;
+	volatile u32 dmarunning;	/* DMA op is in progress */
+	u32 _unused47;
+	volatile u32 maddrdefstart;	/* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE		0x1fa00000	/* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR	0x08000000
+#define SGIMC_SEG1_BADDR	0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL		0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22	0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28	0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */
diff --git a/include/asm-mips/sgi/pi1.h b/include/asm-mips/sgi/pi1.h
new file mode 100644
index 000000000000..c9506915dc5c
--- /dev/null
+++ b/include/asm-mips/sgi/pi1.h
@@ -0,0 +1,71 @@
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _ctrl[3];
+	volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N	0x01
+#define PI1_CTRL_AFD_N		0x02
+#define PI1_CTRL_INIT_N		0x04
+#define PI1_CTRL_SLIN_N		0x08
+#define PI1_CTRL_IRQ_ENA	0x10
+#define PI1_CTRL_DIR		0x20
+#define PI1_CTRL_SEL		0x40
+	u8 _status[3];
+	volatile u8 status;
+#define PI1_STAT_DEVID		0x03	/* bits 0-1 */
+#define PI1_STAT_NOINK		0x04	/* SGI MODE only */
+#define PI1_STAT_ERROR		0x08
+#define PI1_STAT_ONLINE		0x10
+#define PI1_STAT_PE		0x20
+#define PI1_STAT_ACK		0x40
+#define PI1_STAT_BUSY		0x80
+	u8 _dmactrl[3];
+	volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY	0x01    /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT	0x02    /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE	0x00    /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE	0x04    /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE	0x08    /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE	0x0c    /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE	0x10    /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR	0x20    /* clear fifo W/O */
+#define PI1_DMACTRL_READ	0x40    /* read */
+#define PI1_DMACTRL_RUN		0x80    /* pedal to the metal */
+	u8 _intstat[3];
+	volatile u8 intstat;
+#define PI1_INTSTAT_ACK		0x04
+#define PI1_INTSTAT_FEMPTY	0x08
+#define PI1_INTSTAT_NOINK	0x10
+#define PI1_INTSTAT_ONLINE	0x20
+#define PI1_INTSTAT_ERR		0x40
+#define PI1_INTSTAT_PE		0x80
+	u8 _intmask[3];
+	volatile u8 intmask;		/* enabled low, reset high*/
+#define PI1_INTMASK_ACK		0x04
+#define PI1_INTMASK_FIFO_EMPTY	0x08
+#define PI1_INTMASK_NOINK	0x10
+#define PI1_INTMASK_ONLINE	0x20
+#define PI1_INTMASK_ERR		0x40
+#define PI1_INTMASK_PE		0x80
+	u8 _timer1[3];
+	volatile u8 timer1;
+#define PI1_TIME1		0x27
+	u8 _timer2[3];
+	volatile u8 timer2;
+#define PI1_TIME2		0x13
+	u8 _timer3[3];
+	volatile u8 timer3;
+#define PI1_TIME3		0x10
+	u8 _timer4[3];
+	volatile u8 timer4;
+#define PI1_TIME4		0x00
+};
+
+#endif
diff --git a/include/asm-mips/sgi/sgi.h b/include/asm-mips/sgi/sgi.h
new file mode 100644
index 000000000000..645cea7c0f8e
--- /dev/null
+++ b/include/asm-mips/sgi/sgi.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * sgi.h: Definitions specific to SGI machines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@sgi.com)
+ */
+#ifndef _ASM_SGI_SGI_H
+#define _ASM_SGI_SGI_H
+
+/* UP=UniProcessor MP=MultiProcessor(capable) */
+enum sgi_mach {
+	ip4,	/* R2k UP */
+	ip5,	/* R2k MP */
+	ip6,	/* R3k UP */
+	ip7,	/* R3k MP */
+	ip9,	/* R3k UP */
+	ip12,	/* R3kA UP, Indigo */
+	ip15,	/* R3kA MP */
+	ip17,	/* R4K UP */
+	ip19,	/* R4K MP */
+	ip20,	/* R4K UP, Indigo */
+	ip21,	/* TFP MP */
+	ip22,	/* R4x00 UP, Indigo2 */
+	ip25,	/* R10k MP */
+	ip26,	/* TFP UP, Indigo2 */
+	ip27,	/* R10k MP, R12k MP, Origin */
+	ip28,	/* R10k UP, Indigo2 */
+	ip30,	/* Octane */
+	ip32,	/* O2 */
+};
+
+extern enum sgi_mach sgimach;
+extern void sgi_sysinit(void);
+
+/* Many I/O space registers are byte sized and are contained within
+ * one byte per word, specifically the MSB, this macro helps out.
+ */
+#ifdef __MIPSEL__
+#define SGI_MSB(regaddr)   (regaddr)
+#else
+#define SGI_MSB(regaddr)   ((regaddr) | 0x3)
+#endif
+
+#endif /* _ASM_SGI_SGI_H */
diff --git a/include/asm-mips/sgialib.h b/include/asm-mips/sgialib.h
new file mode 100644
index 000000000000..73f097315502
--- /dev/null
+++ b/include/asm-mips/sgialib.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI ARCS firmware interface library for the Linux kernel.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGIALIB_H
+#define _ASM_SGIALIB_H
+
+#include <asm/sgiarcs.h>
+
+extern struct linux_romvec *romvec;
+extern int prom_argc;
+
+extern LONG *_prom_argv, *_prom_envp;
+
+/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer.
+   These macros take care of sign extension.  */
+#define prom_argv(index) ((char *) (long) _prom_argv[(index)])
+#define prom_argc(index) ((char *) (long) _prom_argc[(index)])
+
+extern int prom_flags;
+
+#define PROM_FLAG_ARCS			1
+#define PROM_FLAG_USE_AS_CONSOLE	2
+#define PROM_FLAG_DONT_FREE_TEMP	4
+
+/* Simple char-by-char console I/O. */
+extern void prom_putchar(char c);
+extern char prom_getchar(void);
+
+/* Generic printf() using ARCS console I/O. */
+extern void prom_printf(char *fmt, ...);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+	LONG	base;		/* Within KSEG0 or XKPHYS. */
+	ULONG	size;		/* In bytes. */
+	ULONG	type;		/* free or prom memory */
+};
+
+/* Get next memory descriptor after CURR, returns first descriptor
+ * in chain is CURR is NULL.
+ */
+extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
+#define PROM_NULL_MDESC   ((struct linux_mdesc *) 0)
+
+/* Called by prom_init to setup the physical memory pmemblock
+ * array.
+ */
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+
+/* PROM device tree library routines. */
+#define PROM_NULL_COMPONENT ((pcomponent *) 0)
+
+/* Get sibling component of THIS. */
+extern pcomponent *ArcGetPeer(pcomponent *this);
+
+/* Get child component of THIS. */
+extern pcomponent *ArcGetChild(pcomponent *this);
+
+/* Get parent component of CHILD. */
+extern pcomponent *prom_getparent(pcomponent *child);
+
+/* Copy component opaque data of component THIS into BUFFER
+ * if component THIS has opaque data.  Returns success or
+ * failure status.
+ */
+extern long prom_getcdata(void *buffer, pcomponent *this);
+
+/* Other misc. component routines. */
+extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
+extern long prom_delcomponent(pcomponent *this);
+extern pcomponent *prom_componentbypath(char *path);
+
+/* This is called at prom_init time to identify the
+ * ARC architecture we are running on
+ */
+extern void prom_identify_arch(void);
+
+/* Environment variable routines. */
+extern PCHAR ArcGetEnvironmentVariable(PCHAR name);
+extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
+
+/* ARCS command line acquisition and parsing. */
+extern char *prom_getcmdline(void);
+extern void prom_init_cmdline(void);
+
+/* Acquiring info about the current time, etc. */
+extern struct linux_tinfo *prom_gettinfo(void);
+extern unsigned long prom_getrtime(void);
+
+/* File operations. */
+extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
+extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
+extern long prom_close(unsigned long fd);
+extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_getrstatus(unsigned long fd);
+extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
+extern long prom_mount(char *name, enum linux_mountops op);
+extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
+extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
+
+/* Running stand-along programs. */
+extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
+extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
+extern long prom_exec(char *name, long argc, char **argv, char **envp);
+
+/* Misc. routines. */
+extern VOID prom_halt(VOID) __attribute__((noreturn));
+extern VOID prom_powerdown(VOID) __attribute__((noreturn));
+extern VOID prom_restart(VOID) __attribute__((noreturn));
+extern VOID ArcReboot(VOID) __attribute__((noreturn));
+extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
+extern long prom_cfgsave(VOID);
+extern struct linux_sysid *prom_getsysid(VOID);
+extern VOID ArcFlushAllCaches(VOID);
+extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
+
+#endif /* _ASM_SGIALIB_H */
diff --git a/include/asm-mips/sgiarcs.h b/include/asm-mips/sgiarcs.h
new file mode 100644
index 000000000000..59450335f049
--- /dev/null
+++ b/include/asm-mips/sgiarcs.h
@@ -0,0 +1,549 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ARC firmware interface defines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SGIARCS_H
+#define _ASM_SGIARCS_H
+
+#include <linux/config.h>
+#include <asm/types.h>
+#include <asm/arc/types.h>
+
+/* Various ARCS error codes. */
+#define PROM_ESUCCESS                   0x00
+#define PROM_E2BIG                      0x01
+#define PROM_EACCESS                    0x02
+#define PROM_EAGAIN                     0x03
+#define PROM_EBADF                      0x04
+#define PROM_EBUSY                      0x05
+#define PROM_EFAULT                     0x06
+#define PROM_EINVAL                     0x07
+#define PROM_EIO                        0x08
+#define PROM_EISDIR                     0x09
+#define PROM_EMFILE                     0x0a
+#define PROM_EMLINK                     0x0b
+#define PROM_ENAMETOOLONG               0x0c
+#define PROM_ENODEV                     0x0d
+#define PROM_ENOENT                     0x0e
+#define PROM_ENOEXEC                    0x0f
+#define PROM_ENOMEM                     0x10
+#define PROM_ENOSPC                     0x11
+#define PROM_ENOTDIR                    0x12
+#define PROM_ENOTTY                     0x13
+#define PROM_ENXIO                      0x14
+#define PROM_EROFS                      0x15
+/* SGI ARCS specific errno's. */
+#define PROM_EADDRNOTAVAIL              0x1f
+#define PROM_ETIMEDOUT                  0x20
+#define PROM_ECONNABORTED               0x21
+#define PROM_ENOCONNECT                 0x22
+
+/* Device classes, types, and identifiers for prom
+ * device inventory queries.
+ */
+enum linux_devclass {
+	system, processor, cache, adapter, controller, peripheral, memory
+};
+
+enum linux_devtypes {
+	/* Generic stuff. */
+	Arc, Cpu, Fpu,
+
+	/* Primary insn and data caches. */
+	picache, pdcache,
+
+	/* Secondary insn, data, and combined caches. */
+	sicache, sdcache, sccache,
+
+	memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter,
+	multifunc_adapter, dsk_controller, tp_controller, cdrom_controller,
+	worm_controller, serial_controller, net_controller, disp_controller,
+	parallel_controller, ptr_controller, kbd_controller, audio_controller,
+	misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral,
+	modem_peripheral, monitor_peripheral, printer_peripheral,
+	ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral,
+	net_peripheral, misc_peripheral, anon
+};
+
+enum linux_identifier {
+	bogus, ronly, removable, consin, consout, input, output
+};
+
+/* A prom device tree component. */
+struct linux_component {
+	enum linux_devclass     class;	/* node class */
+	enum linux_devtypes     type;	/* node type */
+	enum linux_identifier   iflags;	/* node flags */
+	USHORT 			vers;	/* node version */
+	USHORT 			rev;	/* node revision */
+	ULONG 			key;	/* completely magic */
+	ULONG 			amask;	/* XXX affinity mask??? */
+	ULONG			cdsize;	/* size of configuration data */
+	ULONG			ilen;	/* length of string identifier */
+	_PULONG			iname;	/* string identifier */
+};
+typedef struct linux_component pcomponent;
+
+struct linux_sysid {
+	char vend[8], prod[8];
+};
+
+/* ARCS prom memory descriptors. */
+enum arcs_memtypes {
+	arcs_eblock,  /* exception block */
+	arcs_rvpage,  /* ARCS romvec page */
+	arcs_fcontig, /* Contiguous and free */
+	arcs_free,    /* Generic free memory */
+	arcs_bmem,    /* Borken memory, don't use */
+	arcs_prog,    /* A loaded program resides here */
+	arcs_atmp,    /* ARCS temporary storage area, wish Sparc OpenBoot told this */
+	arcs_aperm,   /* ARCS permanent storage... */
+};
+
+/* ARC has slightly different types than ARCS */
+enum arc_memtypes {
+	arc_eblock,  /* exception block */
+	arc_rvpage,  /* romvec page */
+	arc_free,    /* Generic free memory */
+	arc_bmem,    /* Borken memory, don't use */
+	arc_prog,    /* A loaded program resides here */
+	arc_atmp,    /* temporary storage area */
+	arc_aperm,   /* permanent storage */
+	arc_fcontig, /* Contiguous and free */
+};
+
+union linux_memtypes {
+    enum arcs_memtypes arcs;
+    enum arc_memtypes arc;
+};
+
+struct linux_mdesc {
+	union linux_memtypes type;
+	ULONG base;
+	ULONG pages;
+};
+
+/* Time of day descriptor. */
+struct linux_tinfo {
+	unsigned short yr;
+	unsigned short mnth;
+	unsigned short day;
+	unsigned short hr;
+	unsigned short min;
+	unsigned short sec;
+	unsigned short msec;
+};
+
+/* ARCS virtual dirents. */
+struct linux_vdirent {
+	ULONG namelen;
+	unsigned char attr;
+	char fname[32]; /* XXX imperical, should be a define */
+};
+
+/* Other stuff for files. */
+enum linux_omode {
+	rdonly, wronly, rdwr, wronly_creat, rdwr_creat,
+	wronly_ssede, rdwr_ssede, dirent, dirent_creat
+};
+
+enum linux_seekmode {
+	absolute, relative
+};
+
+enum linux_mountops {
+	media_load, media_unload
+};
+
+/* This prom has a bolixed design. */
+struct linux_bigint {
+#ifdef __MIPSEL__
+	u32 lo;
+	s32 hi;
+#else /* !(__MIPSEL__) */
+	s32 hi;
+	u32 lo;
+#endif
+};
+
+struct linux_finfo {
+	struct linux_bigint   begin;
+	struct linux_bigint   end;
+	struct linux_bigint   cur;
+	enum linux_devtypes   dtype;
+	unsigned long         namelen;
+	unsigned char         attr;
+	char                  name[32]; /* XXX imperical, should be define */
+};
+
+/* This describes the vector containing function pointers to the ARC
+   firmware functions.  */
+struct linux_romvec {
+	LONG	load;			/* Load an executable image. */
+	LONG	invoke;			/* Invoke a standalong image. */
+	LONG	exec;			/* Load and begin execution of a
+					   standalone image. */
+	LONG	halt;			/* Halt the machine. */
+	LONG	pdown;			/* Power down the machine. */
+	LONG	restart;		/* XXX soft reset??? */
+	LONG	reboot;			/* Reboot the machine. */
+	LONG	imode;			/* Enter PROM interactive mode. */
+	LONG	_unused1;		/* Was ReturnFromMain(). */
+
+	/* PROM device tree interface. */
+	LONG	next_component;
+	LONG	child_component;
+	LONG	parent_component;
+	LONG	component_data;
+	LONG	child_add;
+	LONG	comp_del;
+	LONG	component_by_path;
+
+	/* Misc. stuff. */
+	LONG	cfg_save;
+	LONG	get_sysid;
+
+	/* Probing for memory. */
+	LONG	get_mdesc;
+	LONG	_unused2;		/* was Signal() */
+
+	LONG	get_tinfo;
+	LONG	get_rtime;
+
+	/* File type operations. */
+	LONG	get_vdirent;
+	LONG	open;
+	LONG	close;
+	LONG	read;
+	LONG	get_rstatus;
+	LONG	write;
+	LONG	seek;
+	LONG	mount;
+
+	/* Dealing with firmware environment variables. */
+	LONG	get_evar;
+	LONG	set_evar;
+
+	LONG	get_finfo;
+	LONG	set_finfo;
+
+	/* Miscellaneous. */
+	LONG	cache_flush;
+	LONG	TestUnicodeCharacter;		/* ARC; not sure if ARCS too */
+	LONG	GetDisplayStatus;
+};
+
+/* The SGI ARCS parameter block is in a fixed location for standalone
+ * programs to access PROM facilities easily.
+ */
+typedef struct _SYSTEM_PARAMETER_BLOCK {
+	ULONG			magic;		/* magic cookie */
+#define PROMBLOCK_MAGIC      0x53435241
+
+	ULONG			len;		/* length of parm block */
+	USHORT			ver;		/* ARCS firmware version */
+	USHORT			rev;		/* ARCS firmware revision */
+	_PLONG			rs_block;	/* Restart block. */
+	_PLONG			dbg_block;	/* Debug block. */
+	_PLONG			gevect;		/* XXX General vector??? */
+	_PLONG			utlbvect;	/* XXX UTLB vector??? */
+	ULONG			rveclen;	/* Size of romvec struct. */
+	_PVOID			romvec;		/* Function interface. */
+	ULONG			pveclen;	/* Length of private vector. */
+	_PVOID			pvector;	/* Private vector. */
+	ULONG			adap_cnt;	/* Adapter count. */
+	ULONG			adap_typ0;	/* First adapter type. */
+	ULONG			adap_vcnt0;	/* Adapter 0 vector count. */
+	_PVOID			adap_vector;	/* Adapter 0 vector ptr. */
+	ULONG			adap_typ1;	/* Second adapter type. */
+	ULONG			adap_vcnt1;	/* Adapter 1 vector count. */
+	_PVOID			adap_vector1;	/* Adapter 1 vector ptr. */
+	/* More adapter vectors go here... */
+} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK;
+
+#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000)
+#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec)
+
+/* Cache layout parameter block. */
+union linux_cache_key {
+	struct param {
+#ifdef __MIPSEL__
+		unsigned short size;
+		unsigned char lsize;
+		unsigned char bsize;
+#else /* !(__MIPSEL__) */
+		unsigned char bsize;
+		unsigned char lsize;
+		unsigned short size;
+#endif
+	} info;
+	unsigned long allinfo;
+};
+
+/* Configuration data. */
+struct linux_cdata {
+	char *name;
+	int mlen;
+	enum linux_devtypes type;
+};
+
+/* Common SGI ARCS firmware file descriptors. */
+#define SGIPROM_STDIN     0
+#define SGIPROM_STDOUT    1
+
+/* Common SGI ARCS firmware file types. */
+#define SGIPROM_ROFILE    0x01  /* read-only file */
+#define SGIPROM_HFILE     0x02  /* hidden file */
+#define SGIPROM_SFILE     0x04  /* System file */
+#define SGIPROM_AFILE     0x08  /* Archive file */
+#define SGIPROM_DFILE     0x10  /* Directory file */
+#define SGIPROM_DELFILE   0x20  /* Deleted file */
+
+/* SGI ARCS boot record information. */
+struct sgi_partition {
+	unsigned char flag;
+#define SGIPART_UNUSED 0x00
+#define SGIPART_ACTIVE 0x80
+
+	unsigned char shead, ssect, scyl; /* unused */
+	unsigned char systype; /* OS type, Irix or NT */
+	unsigned char ehead, esect, ecyl; /* unused */
+	unsigned char rsect0, rsect1, rsect2, rsect3;
+	unsigned char tsect0, tsect1, tsect2, tsect3;
+};
+
+#define SGIBBLOCK_MAGIC   0xaa55
+#define SGIBBLOCK_MAXPART 0x0004
+
+struct sgi_bootblock {
+	unsigned char _unused[446];
+	struct sgi_partition partitions[SGIBBLOCK_MAXPART];
+	unsigned short magic;
+};
+
+/* BIOS parameter block. */
+struct sgi_bparm_block {
+	unsigned short bytes_sect;    /* bytes per sector */
+	unsigned char  sect_clust;    /* sectors per cluster */
+	unsigned short sect_resv;     /* reserved sectors */
+	unsigned char  nfats;         /* # of allocation tables */
+	unsigned short nroot_dirents; /* # of root directory entries */
+	unsigned short sect_volume;   /* sectors in volume */
+	unsigned char  media_type;    /* media descriptor */
+	unsigned short sect_fat;      /* sectors per allocation table */
+	unsigned short sect_track;    /* sectors per track */
+	unsigned short nheads;        /* # of heads */
+	unsigned short nhsects;       /* # of hidden sectors */
+};
+
+struct sgi_bsector {
+	unsigned char   jmpinfo[3];
+	unsigned char   manuf_name[8];
+	struct sgi_bparm_block info;
+};
+
+/* Debugging block used with SGI symmon symbolic debugger. */
+#define SMB_DEBUG_MAGIC   0xfeeddead
+struct linux_smonblock {
+	unsigned long   magic;
+	void            (*handler)(void);  /* Breakpoint routine. */
+	unsigned long   dtable_base;       /* Base addr of dbg table. */
+	int             (*printf)(const char *fmt, ...);
+	unsigned long   btable_base;       /* Breakpoint table. */
+	unsigned long   mpflushreqs;       /* SMP cache flush request list. */
+	unsigned long   ntab;              /* Name table. */
+	unsigned long   stab;              /* Symbol table. */
+	int             smax;              /* Max # of symbols. */
+};
+
+/*
+ * Macros for calling a 32-bit ARC implementation from 64-bit code
+ */
+
+#if defined(CONFIG_MIPS64) && defined(CONFIG_ARC32)
+
+#define __arc_clobbers							\
+	"$2","$3" /* ... */, "$8","$9","$10","$11",			\
+	"$12","$13","$14","$15","$16","$24","$25","$31"
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec)							\
+	: __arc_clobbers, "$4","$5","$6","$7");				\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL1(dest,a1)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1)					\
+	: __arc_clobbers, "$5","$6","$7");				\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL2(dest,a1,a2)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2)				\
+	: __arc_clobbers, "$6","$7");					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest,a1,a2,a3)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3)		\
+	: __arc_clobbers, "$7");					\
+	__res;								\
+})
+
+#define ARC_CALL4(dest,a1,a2,a3,a4)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), 		\
+	  "r" (__a4)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#define ARC_CALL5(dest,a1,a2,a3,a4,a5)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	register signed int __a5 = (a5);				\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"sw\t%7, 16($29)\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec),							\
+	  "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4),		\
+	  "r" (__a5)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#endif /* defined(CONFIG_MIPS64) && defined(CONFIG_ARC32) */
+
+#if (defined(CONFIG_MIPS32) && defined(CONFIG_ARC32)) ||		\
+    (defined(CONFIG_MIPS64) && defined(CONFIG_ARC64))
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long (*__vec)(void) = (void *) romvec->dest;			\
+									\
+	__res = __vec();						\
+	__res;								\
+})
+
+#define ARC_CALL1(dest,a1)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long (*__vec)(long) = (void *) romvec->dest;			\
+									\
+	__res = __vec(__a1);						\
+	__res;								\
+})
+
+#define ARC_CALL2(dest,a1,a2)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long (*__vec)(long, long) = (void *) romvec->dest;		\
+									\
+	__res = __vec(__a1, __a2);					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest,a1,a2,a3)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long (*__vec)(long, long, long)	= (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3);				\
+	__res;								\
+})
+
+#define ARC_CALL4(dest,a1,a2,a3,a4)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long (*__vec)(long, long, long, long) = (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4);				\
+	__res;								\
+})
+
+#define ARC_CALL5(dest,a1,a2,a3,a4,a5)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long __a5 = (long) (a5);					\
+	long (*__vec)(long, long, long, long, long);			\
+	__vec = (void *) romvec->dest;					\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4, __a5);			\
+	__res;								\
+})
+#endif /* both kernel and ARC either 32-bit or 64-bit */
+
+#endif /* _ASM_SGIARCS_H */
diff --git a/include/asm-mips/sgidefs.h b/include/asm-mips/sgidefs.h
new file mode 100644
index 000000000000..876442fcfb32
--- /dev/null
+++ b/include/asm-mips/sgidefs.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_SGIDEFS_H
+#define __ASM_SGIDEFS_H
+
+/*
+ * Using a Linux compiler for building Linux seems logic but not to
+ * everybody.
+ */
+#ifndef __linux__
+#error Use a Linux compiler or give up.
+#endif
+
+/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
+ * MIPS ISAs are no longer subsets of each other.  Therefore comparisons
+ * on these symbols except with == may result in unexpected results and
+ * are forbidden!
+ */
+#define _MIPS_ISA_MIPS1		1
+#define _MIPS_ISA_MIPS2		2
+#define _MIPS_ISA_MIPS3		3
+#define _MIPS_ISA_MIPS4		4
+#define _MIPS_ISA_MIPS5		5
+#define _MIPS_ISA_MIPS32	6
+#define _MIPS_ISA_MIPS64	7
+
+/*
+ * Subprogram calling convention
+ */
+#define _MIPS_SIM_ABI32		1
+#define _MIPS_SIM_NABI32	2
+#define _MIPS_SIM_ABI64		3
+
+#endif /* __ASM_SGIDEFS_H */
diff --git a/include/asm-mips/shmbuf.h b/include/asm-mips/shmbuf.h
new file mode 100644
index 000000000000..f994438277bf
--- /dev/null
+++ b/include/asm-mips/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 32-bit rsp. 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/include/asm-mips/shmparam.h b/include/asm-mips/shmparam.h
new file mode 100644
index 000000000000..09290720751c
--- /dev/null
+++ b/include/asm-mips/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA	1
+
+#define	SHMLBA 0x40000			/* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h
new file mode 100644
index 000000000000..d7b11b6c7c32
--- /dev/null
+++ b/include/asm-mips/sibyte/board.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _SIBYTE_BOARD_H
+#define _SIBYTE_BOARD_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SIBYTE_BOARD
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
+    defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
+    defined(CONFIG_SIBYTE_LITTLESUR)
+#include <asm/sibyte/swarm.h>
+#endif
+
+#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE)
+#include <asm/sibyte/sentosa.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_CARMEL
+#include <asm/sibyte/carmel.h>
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef LEDS_PHYS
+#define setleds(t0,t1,c0,c1,c2,c3) \
+	li	t0, (LEDS_PHYS|0xa0000000); \
+	li	t1, c0; \
+	sb	t1, 0x18(t0); \
+	li	t1, c1; \
+	sb	t1, 0x10(t0); \
+	li	t1, c2; \
+	sb	t1, 0x08(t0); \
+	li	t1, c3; \
+	sb	t1, 0x00(t0)
+#else
+#define setleds(t0,t1,c0,c1,c2,c3)
+#endif /* LEDS_PHYS */
+
+#else
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_SIBYTE_BOARD */
+
+#endif /* _SIBYTE_BOARD_H */
diff --git a/include/asm-mips/sibyte/carmel.h b/include/asm-mips/sibyte/carmel.h
new file mode 100644
index 000000000000..7ac5da13ce8a
--- /dev/null
+++ b/include/asm-mips/sibyte/carmel.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_CARMEL_H
+#define __ASM_SIBYTE_CARMEL_H
+
+#include <linux/config.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#define SIBYTE_BOARD_NAME "Carmel"
+
+#define GPIO_PHY_INTERRUPT      2 
+#define GPIO_NONMASKABLE_INT    3 
+#define GPIO_CF_INSERTED        6 
+#define GPIO_MONTEREY_RESET     7 
+#define GPIO_QUADUART_INT       8 
+#define GPIO_CF_INT             9 
+#define GPIO_FPGA_CCLK          10
+#define GPIO_FPGA_DOUT          11
+#define GPIO_FPGA_DIN           12
+#define GPIO_FPGA_PGM           13
+#define GPIO_FPGA_DONE          14
+#define GPIO_FPGA_INIT          15
+
+#define LEDS_CS                 2
+#define LEDS_PHYS               0x100C0000
+#define MLEDS_CS                3
+#define MLEDS_PHYS              0x100A0000
+#define UART_CS                 4
+#define UART_PHYS               0x100D0000
+#define ARAVALI_CS              5
+#define ARAVALI_PHYS            0x11000000
+#define IDE_CS                  6
+#define IDE_PHYS                0x100B0000
+#define ARAVALI2_CS             7
+#define ARAVALI2_PHYS           0x100E0000
+
+#if defined(CONFIG_SIBYTE_CARMEL)
+#define K_GPIO_GB_IDE   9
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+
+#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h
new file mode 100644
index 000000000000..d62da4e2dd36
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ASM_SIBYTE_SB1250_H
+#define _ASM_SIBYTE_SB1250_H
+
+/*
+ * yymmddpp: year, month, day, patch.
+ * should sync with Makefile EXTRAVERSION
+ */
+#define SIBYTE_RELEASE 0x02111403
+
+#define SB1250_NR_IRQS 64
+
+#define SB1250_DUART_MINOR_BASE		64
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+/* For revision/pass information */
+#include <asm/sibyte/sb1250_scd.h>
+extern unsigned int sb1_pass;
+extern unsigned int soc_pass;
+extern unsigned int soc_type;
+extern unsigned int periph_rev;
+extern unsigned int zbbus_mhz;
+
+extern void sb1250_time_init(void);
+extern unsigned long sb1250_gettimeoffset(void);
+extern void sb1250_mask_irq(int cpu, int irq);
+extern void sb1250_unmask_irq(int cpu, int irq);
+extern void sb1250_smp_finish(void);
+extern void prom_printf(char *fmt, ...);
+
+#define AT_spin \
+	__asm__ __volatile__ (		\
+		".set noat\n"		\
+		"li $at, 0\n"		\
+		"1: beqz $at, 1b\n"	\
+		".set at\n"		\
+		)
+
+#endif
+
+#define IOADDR(a) (IO_BASE + (a))
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h
new file mode 100644
index 000000000000..96088fb074a4
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_defs.h
@@ -0,0 +1,242 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Global constants and macros		File: sb1250_defs.h	
+    *  
+    *  This file contains macros and definitions used by the other
+    *  include files.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_DEFS_H
+#define _SB1250_DEFS_H
+
+/*
+ * These headers require ANSI C89 string concatenation, and GCC or other
+ * 'long long' (64-bit integer) support.
+ */
+#if !defined(__STDC__) && !defined(_MSC_VER)
+#error SiByte headers require ANSI C89 support
+#endif
+
+
+/*  *********************************************************************
+    *  Macros for feature tests, used to enable include file features
+    *  for chip features only present in certain chip revisions.
+    *
+    *  SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision
+    *  which is to be exposed by the headers.  If undefined, it defaults to
+    *  "all features."
+    *
+    *  Use like:
+    *
+    *    #define SIBYTE_HDR_FEATURES	SIBYTE_HDR_FMASK_112x_PASS1
+    *
+    *		Generate defines only for that revision of chip.
+    *
+    *    #if SIBYTE_HDR_FEATURE(chip,pass)
+    *
+    *		True if header features for that revision or later of
+    *	        that particular chip type are enabled in SIBYTE_HDR_FEATURES.
+    *	        (Use this to bracket #defines for features present in a given
+    *		revision and later.)
+    *
+    *		Note that there is no implied ordering between chip types.
+    *
+    *		Note also that 'chip' and 'pass' must textually exactly
+    *		match the defines below.  So, for example,
+    *		SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but
+    *		SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons).
+    *
+    *    #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but true for the named revision
+    *		and earlier revisions of the named chip type.
+    *
+    *    #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but only true for the named
+    *		revision of the named chip type.  (Note that this CANNOT
+    *		be used to verify that you're compiling only for that
+    *		particular chip/revision.  It will be true any time this
+    *		chip/revision is included in SIBYTE_HDR_FEATURES.)
+    *
+    *    #if SIBYTE_HDR_FEATURE_CHIP(chip)
+    *
+    *		True if header features for (any revision of) that chip type
+    *		are enabled in SIBYTE_HDR_FEATURES.  (Use this to bracket
+    *		#defines for features specific to a given chip type.)
+    *
+    *  Mask values currently include room for additional revisions of each
+    *  chip type, but can be renumbered at will.  Note that they MUST fit
+    *  into 31 bits and may not include C type constructs, for safe use in
+    *  CPP conditionals.  Bit positions within chip types DO indicate
+    *  ordering, so be careful when adding support for new minor revs.
+    ********************************************************************* */
+
+#define	SIBYTE_HDR_FMASK_1250_ALL		0x00000ff
+#define	SIBYTE_HDR_FMASK_1250_PASS1		0x0000001
+#define	SIBYTE_HDR_FMASK_1250_PASS2		0x0000002
+#define	SIBYTE_HDR_FMASK_1250_PASS3		0x0000004
+
+#define	SIBYTE_HDR_FMASK_112x_ALL		0x0000f00
+#define	SIBYTE_HDR_FMASK_112x_PASS1		0x0000100
+
+/* Bit mask for chip/revision.  (use _ALL for all revisions of a chip).  */ 
+#define	SIBYTE_HDR_FMASK(chip, pass)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
+#define	SIBYTE_HDR_FMASK_ALLREVS(chip)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+
+#define	SIBYTE_HDR_FMASK_ALL						\
+    (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+
+#ifndef SIBYTE_HDR_FEATURES
+#define	SIBYTE_HDR_FEATURES			SIBYTE_HDR_FMASK_ALL
+#endif
+
+
+/* Bit mask for revisions of chip exclusively before the named revision.  */
+#define	SIBYTE_HDR_FMASK_BEFORE(chip, pass)				\
+    ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+/* Bit mask for revisions of chip exclusively after the named revision.  */
+#define	SIBYTE_HDR_FMASK_AFTER(chip, pass)				\
+    (~(SIBYTE_HDR_FMASK(chip, pass)					\
+     | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+
+/* True if header features enabled for (any revision of) that chip type.  */
+#define SIBYTE_HDR_FEATURE_CHIP(chip)					\
+    (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for that rev or later, inclusive.  */
+#define SIBYTE_HDR_FEATURE(chip, pass)					\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	  | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for exactly that rev.  */
+#define SIBYTE_HDR_FEATURE_EXACT(chip, pass)				\
+    (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for that rev or before, inclusive.  */
+#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass)				\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	 | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+
+/*  *********************************************************************
+    *  Naming schemes for constants in these files:
+    *  
+    *  M_xxx           MASK constant (identifies bits in a register). 
+    *                  For multi-bit fields, all bits in the field will
+    *                  be set.
+    *
+    *  K_xxx           "Code" constant (value for data in a multi-bit
+    *                  field).  The value is right justified.
+    *
+    *  V_xxx           "Value" constant.  This is the same as the 
+    *                  corresponding "K_xxx" constant, except it is
+    *                  shifted to the correct position in the register.
+    *
+    *  S_xxx           SHIFT constant.  This is the number of bits that
+    *                  a field value (code) needs to be shifted 
+    *                  (towards the left) to put the value in the right
+    *                  position for the register.
+    *
+    *  A_xxx           ADDRESS constant.  This will be a physical 
+    *                  address.  Use the PHYS_TO_K1 macro to generate
+    *                  a K1SEG address.
+    *
+    *  R_xxx           RELATIVE offset constant.  This is an offset from
+    *                  an A_xxx constant (usually the first register in
+    *                  a group).
+    *  
+    *  G_xxx(X)        GET value.  This macro obtains a multi-bit field
+    *                  from a register, masks it, and shifts it to
+    *                  the bottom of the register (retrieving a K_xxx
+    *                  value, for example).
+    *
+    *  V_xxx(X)        VALUE.  This macro computes the value of a
+    *                  K_xxx constant shifted to the correct position
+    *                  in the register.
+    ********************************************************************* */
+
+
+
+
+/*
+ * Cast to 64-bit number.  Presumably the syntax is different in 
+ * assembly language.
+ *
+ * Note: you'll need to define uint32_t and uint64_t in your headers.
+ */
+
+#if !defined(__ASSEMBLER__)
+#define _SB_MAKE64(x) ((uint64_t)(x))
+#define _SB_MAKE32(x) ((uint32_t)(x))
+#else
+#define _SB_MAKE64(x) (x)
+#define _SB_MAKE32(x) (x)
+#endif
+
+
+/*
+ * Make a mask for 1 bit at position 'n'
+ */
+
+#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n))
+
+/*
+ * Make a mask for 'v' bits at position 'n'
+ */
+
+#define _SB_MAKEMASK(v,n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK_32(v,n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n))
+
+/*
+ * Make a value at 'v' at bit position 'n'
+ */
+
+#define _SB_MAKEVALUE(v,n) (_SB_MAKE64(v) << _SB_MAKE64(n))
+#define _SB_MAKEVALUE_32(v,n) (_SB_MAKE32(v) << _SB_MAKE32(n))
+
+#define _SB_GETVALUE(v,n,m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n))
+#define _SB_GETVALUE_32(v,n,m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n))
+
+/*
+ * Macros to read/write on-chip registers
+ * XXX should we do the PHYS_TO_K1 here?
+ */
+
+
+#if defined(__mips64) && !defined(__ASSEMBLER__)
+#define SBWRITECSR(csr,val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
+#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
+#endif /* __ASSEMBLER__ */
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h
new file mode 100644
index 000000000000..f1b08d32338d
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_dma.h
@@ -0,0 +1,594 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  DMA definitions				File: sb1250_dma.h
+    *  
+    *  This module contains constants and macros useful for
+    *  programming the SB1250's DMA controllers, both the data mover
+    *  and the Ethernet DMA.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_DMA_H
+#define _SB1250_DMA_H
+
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  DMA Registers
+    ********************************************************************* */
+
+/* 
+ * Ethernet and Serial DMA Configuration Register 0  (Table 7-4)
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 
+ * Registers: DMA_CONFIG0_MAC_x_TX_CH_0
+ * Registers: DMA_CONFIG0_SER_x_RX
+ * Registers: DMA_CONFIG0_SER_x_TX
+ */
+
+
+#define M_DMA_DROP                  _SB_MAKEMASK1(0)
+
+#define M_DMA_CHAIN_SEL             _SB_MAKEMASK1(1)
+#define M_DMA_RESERVED1             _SB_MAKEMASK1(2)
+
+#define S_DMA_DESC_TYPE		    _SB_MAKE64(1)
+#define M_DMA_DESC_TYPE		    _SB_MAKE64(2,S_DMA_DESC_TYPE)
+#define V_DMA_DESC_TYPE(x)          _SB_MAKEVALUE(x,S_DMA_DESC_TYPE)
+#define G_DMA_DESC_TYPE(x)          _SB_GETVALUE(x,S_DMA_DESC_TYPE,M_DMA_DESC_TYPE)
+
+#define K_DMA_DESC_TYPE_RING_AL		0
+#define K_DMA_DESC_TYPE_CHAIN_AL	1
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_DMA_DESC_TYPE_RING_UAL_WI	2
+#define K_DMA_DESC_TYPE_RING_UAL_RMW	3
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_DMA_EOP_INT_EN            _SB_MAKEMASK1(3)
+#define M_DMA_HWM_INT_EN            _SB_MAKEMASK1(4)
+#define M_DMA_LWM_INT_EN            _SB_MAKEMASK1(5)
+#define M_DMA_TBX_EN                _SB_MAKEMASK1(6)
+#define M_DMA_TDX_EN                _SB_MAKEMASK1(7)
+
+#define S_DMA_INT_PKTCNT            _SB_MAKE64(8)
+#define M_DMA_INT_PKTCNT            _SB_MAKEMASK(8,S_DMA_INT_PKTCNT)
+#define V_DMA_INT_PKTCNT(x)         _SB_MAKEVALUE(x,S_DMA_INT_PKTCNT)
+#define G_DMA_INT_PKTCNT(x)         _SB_GETVALUE(x,S_DMA_INT_PKTCNT,M_DMA_INT_PKTCNT)
+
+#define S_DMA_RINGSZ                _SB_MAKE64(16)
+#define M_DMA_RINGSZ                _SB_MAKEMASK(16,S_DMA_RINGSZ)
+#define V_DMA_RINGSZ(x)             _SB_MAKEVALUE(x,S_DMA_RINGSZ)
+#define G_DMA_RINGSZ(x)             _SB_GETVALUE(x,S_DMA_RINGSZ,M_DMA_RINGSZ)
+
+#define S_DMA_HIGH_WATERMARK        _SB_MAKE64(32)
+#define M_DMA_HIGH_WATERMARK        _SB_MAKEMASK(16,S_DMA_HIGH_WATERMARK)
+#define V_DMA_HIGH_WATERMARK(x)     _SB_MAKEVALUE(x,S_DMA_HIGH_WATERMARK)
+#define G_DMA_HIGH_WATERMARK(x)     _SB_GETVALUE(x,S_DMA_HIGH_WATERMARK,M_DMA_HIGH_WATERMARK)
+
+#define S_DMA_LOW_WATERMARK         _SB_MAKE64(48)
+#define M_DMA_LOW_WATERMARK         _SB_MAKEMASK(16,S_DMA_LOW_WATERMARK)
+#define V_DMA_LOW_WATERMARK(x)      _SB_MAKEVALUE(x,S_DMA_LOW_WATERMARK)
+#define G_DMA_LOW_WATERMARK(x)      _SB_GETVALUE(x,S_DMA_LOW_WATERMARK,M_DMA_LOW_WATERMARK)
+
+/*
+ * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 
+ * Registers: DMA_CONFIG1_DMA_x_TX_CH_0
+ * Registers: DMA_CONFIG1_SER_x_RX
+ * Registers: DMA_CONFIG1_SER_x_TX
+ */
+
+#define M_DMA_HDR_CF_EN             _SB_MAKEMASK1(0)
+#define M_DMA_ASIC_XFR_EN           _SB_MAKEMASK1(1)
+#define M_DMA_PRE_ADDR_EN           _SB_MAKEMASK1(2)
+#define M_DMA_FLOW_CTL_EN           _SB_MAKEMASK1(3)
+#define M_DMA_NO_DSCR_UPDT          _SB_MAKEMASK1(4)
+#define M_DMA_L2CA		    _SB_MAKEMASK1(5)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_DMA_RX_XTRA_STATUS	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_CPU_PAUSE	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_FC_PAUSE_EN	    _SB_MAKEMASK1(7)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_DMA_MBZ1                  _SB_MAKEMASK(6,15)
+
+#define S_DMA_HDR_SIZE              _SB_MAKE64(21)
+#define M_DMA_HDR_SIZE              _SB_MAKEMASK(9,S_DMA_HDR_SIZE)
+#define V_DMA_HDR_SIZE(x)           _SB_MAKEVALUE(x,S_DMA_HDR_SIZE)
+#define G_DMA_HDR_SIZE(x)           _SB_GETVALUE(x,S_DMA_HDR_SIZE,M_DMA_HDR_SIZE)
+
+#define M_DMA_MBZ2                  _SB_MAKEMASK(5,32)
+
+#define S_DMA_ASICXFR_SIZE          _SB_MAKE64(37)
+#define M_DMA_ASICXFR_SIZE          _SB_MAKEMASK(9,S_DMA_ASICXFR_SIZE)
+#define V_DMA_ASICXFR_SIZE(x)       _SB_MAKEVALUE(x,S_DMA_ASICXFR_SIZE)
+#define G_DMA_ASICXFR_SIZE(x)       _SB_GETVALUE(x,S_DMA_ASICXFR_SIZE,M_DMA_ASICXFR_SIZE)
+
+#define S_DMA_INT_TIMEOUT           _SB_MAKE64(48)
+#define M_DMA_INT_TIMEOUT           _SB_MAKEMASK(16,S_DMA_INT_TIMEOUT)
+#define V_DMA_INT_TIMEOUT(x)        _SB_MAKEVALUE(x,S_DMA_INT_TIMEOUT)
+#define G_DMA_INT_TIMEOUT(x)        _SB_GETVALUE(x,S_DMA_INT_TIMEOUT,M_DMA_INT_TIMEOUT)
+
+/*
+ * Ethernet and Serial DMA Descriptor base address (Table 7-6)
+ */
+
+#define M_DMA_DSCRBASE_MBZ          _SB_MAKEMASK(4,0)
+
+
+/*
+ * ASIC Mode Base Address (Table 7-7)
+ */
+
+#define M_DMA_ASIC_BASE_MBZ         _SB_MAKEMASK(20,0)
+
+/*
+ * DMA Descriptor Count Registers (Table 7-8)
+ */
+ 
+/* No bitfields */
+
+
+/* 
+ * Current Descriptor Address Register (Table 7-11)
+ */
+
+#define S_DMA_CURDSCR_ADDR          _SB_MAKE64(0)
+#define M_DMA_CURDSCR_ADDR          _SB_MAKEMASK(40,S_DMA_CURDSCR_ADDR)
+#define S_DMA_CURDSCR_COUNT         _SB_MAKE64(40)
+#define M_DMA_CURDSCR_COUNT         _SB_MAKEMASK(16,S_DMA_CURDSCR_COUNT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_DMA_TX_CH_PAUSE_ON	    _SB_MAKEMASK1(56)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * Receive Packet Drop Registers
+ */
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_DMA_OODLOST_RX           _SB_MAKE64(0)
+#define M_DMA_OODLOST_RX           _SB_MAKEMASK(16,S_DMA_OODLOST_RX)
+#define G_DMA_OODLOST_RX(x)        _SB_GETVALUE(x,S_DMA_OODLOST_RX,M_DMA_OODLOST_RX)
+
+#define S_DMA_EOP_COUNT_RX         _SB_MAKE64(16)
+#define M_DMA_EOP_COUNT_RX         _SB_MAKEMASK(8,S_DMA_EOP_COUNT_RX)
+#define G_DMA_EOP_COUNT_RX(x)      _SB_GETVALUE(x,S_DMA_EOP_COUNT_RX,M_DMA_EOP_COUNT_RX)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*  *********************************************************************
+    *  DMA Descriptors
+    ********************************************************************* */
+
+/*
+ * Descriptor doubleword "A"  (Table 7-12)
+ */
+
+#define S_DMA_DSCRA_OFFSET          _SB_MAKE64(0)
+#define M_DMA_DSCRA_OFFSET          _SB_MAKEMASK(5,S_DMA_DSCRA_OFFSET)
+#define V_DMA_DSCRA_OFFSET(x)       _SB_MAKEVALUE(x,S_DMA_DSCRA_OFFSET)
+#define G_DMA_DSCRA_OFFSET(x)       _SB_GETVALUE(x,S_DMA_DSCRA_OFFSET,M_DMA_DSCRA_OFFSET)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRA_A_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRA_A_ADDR          _SB_MAKEMASK(35,S_DMA_DSCRA_A_ADDR)
+
+#define M_DMA_DSCRA_A_ADDR_OFFSET   (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_DMA_DSCRA_A_ADDR_UA        _SB_MAKE64(0)
+#define M_DMA_DSCRA_A_ADDR_UA        _SB_MAKEMASK(40,S_DMA_DSCRA_A_ADDR_UA)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define S_DMA_DSCRA_A_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRA_A_SIZE          _SB_MAKEMASK(9,S_DMA_DSCRA_A_SIZE)
+#define V_DMA_DSCRA_A_SIZE(x)       _SB_MAKEVALUE(x,S_DMA_DSCRA_A_SIZE)
+#define G_DMA_DSCRA_A_SIZE(x)       _SB_GETVALUE(x,S_DMA_DSCRA_A_SIZE,M_DMA_DSCRA_A_SIZE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_DMA_DSCRA_DSCR_CNT	    _SB_MAKE64(40)
+#define M_DMA_DSCRA_DSCR_CNT	    _SB_MAKEMASK(8,S_DMA_DSCRA_DSCR_CNT)
+#define G_DMA_DSCRA_DSCR_CNT(x)	    _SB_GETVALUE(x,S_DMA_DSCRA_DSCR_CNT,M_DMA_DSCRA_DSCR_CNT)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_DMA_DSCRA_INTERRUPT       _SB_MAKEMASK1(49)
+#define M_DMA_DSCRA_OFFSETB	    _SB_MAKEMASK1(50)
+
+#define S_DMA_DSCRA_STATUS          _SB_MAKE64(51)
+#define M_DMA_DSCRA_STATUS          _SB_MAKEMASK(13,S_DMA_DSCRA_STATUS)
+#define V_DMA_DSCRA_STATUS(x)       _SB_MAKEVALUE(x,S_DMA_DSCRA_STATUS)
+#define G_DMA_DSCRA_STATUS(x)       _SB_GETVALUE(x,S_DMA_DSCRA_STATUS,M_DMA_DSCRA_STATUS)
+
+/*
+ * Descriptor doubleword "B"  (Table 7-13)
+ */
+
+
+#define S_DMA_DSCRB_OPTIONS         _SB_MAKE64(0)
+#define M_DMA_DSCRB_OPTIONS         _SB_MAKEMASK(4,S_DMA_DSCRB_OPTIONS)
+#define V_DMA_DSCRB_OPTIONS(x)      _SB_MAKEVALUE(x,S_DMA_DSCRB_OPTIONS)
+#define G_DMA_DSCRB_OPTIONS(x)      _SB_GETVALUE(x,S_DMA_DSCRB_OPTIONS,M_DMA_DSCRB_OPTIONS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_DMA_DSCRB_A_SIZE        _SB_MAKE64(8)
+#define M_DMA_DSCRB_A_SIZE        _SB_MAKEMASK(14,S_DMA_DSCRB_A_SIZE)
+#define V_DMA_DSCRB_A_SIZE(x)     _SB_MAKEVALUE(x,S_DMA_DSCRB_A_SIZE)
+#define G_DMA_DSCRB_A_SIZE(x)     _SB_GETVALUE(x,S_DMA_DSCRB_A_SIZE,M_DMA_DSCRB_A_SIZE)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define R_DMA_DSCRB_ADDR            _SB_MAKE64(0x10)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRB_B_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRB_B_ADDR          _SB_MAKEMASK(35,S_DMA_DSCRB_B_ADDR)
+
+#define S_DMA_DSCRB_B_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRB_B_SIZE          _SB_MAKEMASK(9,S_DMA_DSCRB_B_SIZE)
+#define V_DMA_DSCRB_B_SIZE(x)       _SB_MAKEVALUE(x,S_DMA_DSCRB_B_SIZE)
+#define G_DMA_DSCRB_B_SIZE(x)       _SB_GETVALUE(x,S_DMA_DSCRB_B_SIZE,M_DMA_DSCRB_B_SIZE)
+
+#define M_DMA_DSCRB_B_VALID         _SB_MAKEMASK1(49)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKE64(48)
+#define M_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKEMASK(2,S_DMA_DSCRB_PKT_SIZE_MSB)
+#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB)
+#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB,M_DMA_DSCRB_PKT_SIZE_MSB)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define S_DMA_DSCRB_PKT_SIZE        _SB_MAKE64(50)
+#define M_DMA_DSCRB_PKT_SIZE        _SB_MAKEMASK(14,S_DMA_DSCRB_PKT_SIZE)
+#define V_DMA_DSCRB_PKT_SIZE(x)     _SB_MAKEVALUE(x,S_DMA_DSCRB_PKT_SIZE)
+#define G_DMA_DSCRB_PKT_SIZE(x)     _SB_GETVALUE(x,S_DMA_DSCRB_PKT_SIZE,M_DMA_DSCRB_PKT_SIZE)
+
+/*
+ * from pass2 some bits in dscr_b are also used for rx status
+ */
+#define S_DMA_DSCRB_STATUS          _SB_MAKE64(0)
+#define M_DMA_DSCRB_STATUS          _SB_MAKEMASK(1,S_DMA_DSCRB_STATUS)
+#define V_DMA_DSCRB_STATUS(x)       _SB_MAKEVALUE(x,S_DMA_DSCRB_STATUS)
+#define G_DMA_DSCRB_STATUS(x)       _SB_GETVALUE(x,S_DMA_DSCRB_STATUS,M_DMA_DSCRB_STATUS)
+
+/* 
+ * Ethernet Descriptor Status Bits (Table 7-15)
+ */
+
+#define M_DMA_ETHRX_BADIP4CS        _SB_MAKEMASK1(51)
+#define M_DMA_ETHRX_DSCRERR	    _SB_MAKEMASK1(52)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) 
+/* Note: BADTCPCS is actually in DSCR_B options field */
+#define M_DMA_ETHRX_BADTCPCS	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_DMA_ETH_VLAN_FLAG	_SB_MAKEMASK1(1)
+#define M_DMA_ETH_CRC_FLAG	_SB_MAKEMASK1(2)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define S_DMA_ETHRX_RXCH            53
+#define M_DMA_ETHRX_RXCH            _SB_MAKEMASK(2,S_DMA_ETHRX_RXCH)
+#define V_DMA_ETHRX_RXCH(x)         _SB_MAKEVALUE(x,S_DMA_ETHRX_RXCH)
+#define G_DMA_ETHRX_RXCH(x)         _SB_GETVALUE(x,S_DMA_ETHRX_RXCH,M_DMA_ETHRX_RXCH)
+
+#define S_DMA_ETHRX_PKTTYPE         55
+#define M_DMA_ETHRX_PKTTYPE         _SB_MAKEMASK(3,S_DMA_ETHRX_PKTTYPE)
+#define V_DMA_ETHRX_PKTTYPE(x)      _SB_MAKEVALUE(x,S_DMA_ETHRX_PKTTYPE)
+#define G_DMA_ETHRX_PKTTYPE(x)      _SB_GETVALUE(x,S_DMA_ETHRX_PKTTYPE,M_DMA_ETHRX_PKTTYPE)
+
+#define K_DMA_ETHRX_PKTTYPE_IPV4    0
+#define K_DMA_ETHRX_PKTTYPE_ARPV4   1
+#define K_DMA_ETHRX_PKTTYPE_802     2
+#define K_DMA_ETHRX_PKTTYPE_OTHER   3
+#define K_DMA_ETHRX_PKTTYPE_USER0   4
+#define K_DMA_ETHRX_PKTTYPE_USER1   5
+#define K_DMA_ETHRX_PKTTYPE_USER2   6
+#define K_DMA_ETHRX_PKTTYPE_USER3   7
+
+#define M_DMA_ETHRX_MATCH_HASH      _SB_MAKEMASK1(58)
+#define M_DMA_ETHRX_MATCH_EXACT     _SB_MAKEMASK1(59)
+#define M_DMA_ETHRX_BCAST           _SB_MAKEMASK1(60)
+#define M_DMA_ETHRX_MCAST           _SB_MAKEMASK1(61)
+#define M_DMA_ETHRX_BAD	            _SB_MAKEMASK1(62)
+#define M_DMA_ETHRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Status Bits (Table 7-16)
+ */
+
+#define M_DMA_ETHTX_SOP	    	    _SB_MAKEMASK1(63)
+
+/* 
+ * Ethernet Transmit Options (Table 7-17)
+ */
+
+#define K_DMA_ETHTX_NOTSOP          _SB_MAKE64(0x00)
+#define K_DMA_ETHTX_APPENDCRC       _SB_MAKE64(0x01)
+#define K_DMA_ETHTX_REPLACECRC      _SB_MAKE64(0x02)
+#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03)
+#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04)
+#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05)
+#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6)
+#define K_DMA_ETHTX_NOMODS          _SB_MAKE64(0x07)
+#define K_DMA_ETHTX_RESERVED1       _SB_MAKE64(0x08)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C)
+#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E)
+#define K_DMA_ETHTX_RESERVED2       _SB_MAKE64(0x0F)
+
+/*
+ * Serial Receive Options (Table 7-18)
+ */
+#define M_DMA_SERRX_CRC_ERROR       _SB_MAKEMASK1(56)
+#define M_DMA_SERRX_ABORT           _SB_MAKEMASK1(57)
+#define M_DMA_SERRX_OCTET_ERROR     _SB_MAKEMASK1(58)
+#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59)
+#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60)
+#define M_DMA_SERRX_OVERRUN_ERROR   _SB_MAKEMASK1(61)
+#define M_DMA_SERRX_GOOD            _SB_MAKEMASK1(62)
+#define M_DMA_SERRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Status Bits (Table 7-20)
+ */
+
+#define M_DMA_SERTX_FLAG	    _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Options (Table 7-21)
+ */
+
+#define K_DMA_SERTX_RESERVED        _SB_MAKEMASK1(0)
+#define K_DMA_SERTX_APPENDCRC       _SB_MAKEMASK1(1)
+#define K_DMA_SERTX_APPENDPAD       _SB_MAKEMASK1(2)
+#define K_DMA_SERTX_ABORT           _SB_MAKEMASK1(3)
+
+
+/*  *********************************************************************
+    *  Data Mover Registers
+    ********************************************************************* */
+
+/* 
+ * Data Mover Descriptor Base Address Register (Table 7-22)
+ * Register: DM_DSCR_BASE_0
+ * Register: DM_DSCR_BASE_1
+ * Register: DM_DSCR_BASE_2
+ * Register: DM_DSCR_BASE_3
+ */
+
+#define M_DM_DSCR_BASE_MBZ          _SB_MAKEMASK(4,0)
+
+/*  Note: Just mask the base address and then OR it in. */
+#define S_DM_DSCR_BASE_ADDR         _SB_MAKE64(4)
+#define M_DM_DSCR_BASE_ADDR         _SB_MAKEMASK(36,S_DM_DSCR_BASE_ADDR)
+
+#define S_DM_DSCR_BASE_RINGSZ       _SB_MAKE64(40)
+#define M_DM_DSCR_BASE_RINGSZ       _SB_MAKEMASK(16,S_DM_DSCR_BASE_RINGSZ)
+#define V_DM_DSCR_BASE_RINGSZ(x)    _SB_MAKEVALUE(x,S_DM_DSCR_BASE_RINGSZ)
+#define G_DM_DSCR_BASE_RINGSZ(x)    _SB_GETVALUE(x,S_DM_DSCR_BASE_RINGSZ,M_DM_DSCR_BASE_RINGSZ)
+
+#define S_DM_DSCR_BASE_PRIORITY     _SB_MAKE64(56)
+#define M_DM_DSCR_BASE_PRIORITY     _SB_MAKEMASK(3,S_DM_DSCR_BASE_PRIORITY)
+#define V_DM_DSCR_BASE_PRIORITY(x)  _SB_MAKEVALUE(x,S_DM_DSCR_BASE_PRIORITY)
+#define G_DM_DSCR_BASE_PRIORITY(x)  _SB_GETVALUE(x,S_DM_DSCR_BASE_PRIORITY,M_DM_DSCR_BASE_PRIORITY)
+
+#define K_DM_DSCR_BASE_PRIORITY_1   0
+#define K_DM_DSCR_BASE_PRIORITY_2   1
+#define K_DM_DSCR_BASE_PRIORITY_4   2
+#define K_DM_DSCR_BASE_PRIORITY_8   3
+#define K_DM_DSCR_BASE_PRIORITY_16  4
+
+#define M_DM_DSCR_BASE_ACTIVE       _SB_MAKEMASK1(59)
+#define M_DM_DSCR_BASE_INTERRUPT    _SB_MAKEMASK1(60)
+#define M_DM_DSCR_BASE_RESET        _SB_MAKEMASK1(61)	/* write register */
+#define M_DM_DSCR_BASE_ERROR        _SB_MAKEMASK1(61)	/* read register */
+#define M_DM_DSCR_BASE_ABORT        _SB_MAKEMASK1(62)
+#define M_DM_DSCR_BASE_ENABL        _SB_MAKEMASK1(63)
+
+/* 
+ * Data Mover Descriptor Count Register (Table 7-25)
+ */
+
+/* no bitfields */
+
+/*
+ * Data Mover Current Descriptor Address (Table 7-24)
+ * Register: DM_CUR_DSCR_ADDR_0
+ * Register: DM_CUR_DSCR_ADDR_1
+ * Register: DM_CUR_DSCR_ADDR_2
+ * Register: DM_CUR_DSCR_ADDR_3
+ */
+
+#define S_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKE64(0)
+#define M_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKEMASK(40,S_DM_CUR_DSCR_DSCR_ADDR)
+
+#define S_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKE64(48)
+#define M_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKEMASK(16,S_DM_CUR_DSCR_DSCR_COUNT)
+#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r,S_DM_CUR_DSCR_DSCR_COUNT)
+#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r,S_DM_CUR_DSCR_DSCR_COUNT,\
+                                     M_DM_CUR_DSCR_DSCR_COUNT)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Data Mover Channel Partial Result Registers
+ * Register: DM_PARTIAL_0
+ * Register: DM_PARTIAL_1
+ * Register: DM_PARTIAL_2
+ * Register: DM_PARTIAL_3
+ */
+#define S_DM_PARTIAL_CRC_PARTIAL      _SB_MAKE64(0)
+#define M_DM_PARTIAL_CRC_PARTIAL      _SB_MAKEMASK(32,S_DM_PARTIAL_CRC_PARTIAL)
+#define V_DM_PARTIAL_CRC_PARTIAL(r)   _SB_MAKEVALUE(r,S_DM_PARTIAL_CRC_PARTIAL)
+#define G_DM_PARTIAL_CRC_PARTIAL(r)   _SB_GETVALUE(r,S_DM_PARTIAL_CRC_PARTIAL,\
+                                       M_DM_PARTIAL_CRC_PARTIAL)
+
+#define S_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKE64(32)
+#define M_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKEMASK(16,S_DM_PARTIAL_TCPCS_PARTIAL)
+#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r,S_DM_PARTIAL_TCPCS_PARTIAL)
+#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r,S_DM_PARTIAL_TCPCS_PARTIAL,\
+                                       M_DM_PARTIAL_TCPCS_PARTIAL)
+
+#define M_DM_PARTIAL_ODD_BYTE         _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Data Mover CRC Definition Registers
+ * Register: CRC_DEF_0
+ * Register: CRC_DEF_1
+ */
+#define S_CRC_DEF_CRC_INIT            _SB_MAKE64(0)
+#define M_CRC_DEF_CRC_INIT            _SB_MAKEMASK(32,S_CRC_DEF_CRC_INIT)
+#define V_CRC_DEF_CRC_INIT(r)         _SB_MAKEVALUE(r,S_CRC_DEF_CRC_INIT)
+#define G_CRC_DEF_CRC_INIT(r)         _SB_GETVALUE(r,S_CRC_DEF_CRC_INIT,\
+                                       M_CRC_DEF_CRC_INIT)
+
+#define S_CRC_DEF_CRC_POLY            _SB_MAKE64(32)
+#define M_CRC_DEF_CRC_POLY            _SB_MAKEMASK(32,S_CRC_DEF_CRC_POLY)
+#define V_CRC_DEF_CRC_POLY(r)         _SB_MAKEVALUE(r,S_CRC_DEF_CRC_POLY)
+#define G_CRC_DEF_CRC_POLY(r)         _SB_GETVALUE(r,S_CRC_DEF_CRC_POLY,\
+                                       M_CRC_DEF_CRC_POLY)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Data Mover CRC/Checksum Definition Registers
+ * Register: CTCP_DEF_0
+ * Register: CTCP_DEF_1
+ */
+#define S_CTCP_DEF_CRC_TXOR           _SB_MAKE64(0)
+#define M_CTCP_DEF_CRC_TXOR           _SB_MAKEMASK(32,S_CTCP_DEF_CRC_TXOR)
+#define V_CTCP_DEF_CRC_TXOR(r)        _SB_MAKEVALUE(r,S_CTCP_DEF_CRC_TXOR)
+#define G_CTCP_DEF_CRC_TXOR(r)        _SB_GETVALUE(r,S_CTCP_DEF_CRC_TXOR,\
+                                       M_CTCP_DEF_CRC_TXOR)
+
+#define S_CTCP_DEF_TCPCS_INIT         _SB_MAKE64(32)
+#define M_CTCP_DEF_TCPCS_INIT         _SB_MAKEMASK(16,S_CTCP_DEF_TCPCS_INIT)
+#define V_CTCP_DEF_TCPCS_INIT(r)      _SB_MAKEVALUE(r,S_CTCP_DEF_TCPCS_INIT)
+#define G_CTCP_DEF_TCPCS_INIT(r)      _SB_GETVALUE(r,S_CTCP_DEF_TCPCS_INIT,\
+                                       M_CTCP_DEF_TCPCS_INIT)
+
+#define S_CTCP_DEF_CRC_WIDTH          _SB_MAKE64(48)
+#define M_CTCP_DEF_CRC_WIDTH          _SB_MAKEMASK(2,S_CTCP_DEF_CRC_WIDTH)
+#define V_CTCP_DEF_CRC_WIDTH(r)       _SB_MAKEVALUE(r,S_CTCP_DEF_CRC_WIDTH)
+#define G_CTCP_DEF_CRC_WIDTH(r)       _SB_GETVALUE(r,S_CTCP_DEF_CRC_WIDTH,\
+                                       M_CTCP_DEF_CRC_WIDTH)
+
+#define K_CTCP_DEF_CRC_WIDTH_4        0
+#define K_CTCP_DEF_CRC_WIDTH_2        1
+#define K_CTCP_DEF_CRC_WIDTH_1        2
+
+#define M_CTCP_DEF_CRC_BIT_ORDER      _SB_MAKEMASK1(50)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+/*
+ * Data Mover Descriptor Doubleword "A"  (Table 7-26)
+ */
+
+#define S_DM_DSCRA_DST_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRA_DST_ADDR         _SB_MAKEMASK(40,S_DM_DSCRA_DST_ADDR)
+
+#define M_DM_DSCRA_UN_DEST          _SB_MAKEMASK1(40)
+#define M_DM_DSCRA_UN_SRC           _SB_MAKEMASK1(41)
+#define M_DM_DSCRA_INTERRUPT        _SB_MAKEMASK1(42)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_DM_DSCRA_THROTTLE         _SB_MAKEMASK1(43)
+#endif /* up to 1250 PASS1 */
+
+#define S_DM_DSCRA_DIR_DEST         _SB_MAKE64(44)
+#define M_DM_DSCRA_DIR_DEST         _SB_MAKEMASK(2,S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST(x)      _SB_MAKEVALUE(x,S_DM_DSCRA_DIR_DEST)
+#define G_DM_DSCRA_DIR_DEST(x)      _SB_GETVALUE(x,S_DM_DSCRA_DIR_DEST,M_DM_DSCRA_DIR_DEST)
+
+#define K_DM_DSCRA_DIR_DEST_INCR    0
+#define K_DM_DSCRA_DIR_DEST_DECR    1
+#define K_DM_DSCRA_DIR_DEST_CONST   2
+
+#define V_DM_DSCRA_DIR_DEST_INCR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR,S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_DECR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR,S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_CONST   _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST,S_DM_DSCRA_DIR_DEST)
+
+#define S_DM_DSCRA_DIR_SRC          _SB_MAKE64(46)
+#define M_DM_DSCRA_DIR_SRC          _SB_MAKEMASK(2,S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC(x)       _SB_MAKEVALUE(x,S_DM_DSCRA_DIR_SRC)
+#define G_DM_DSCRA_DIR_SRC(x)       _SB_GETVALUE(x,S_DM_DSCRA_DIR_SRC,M_DM_DSCRA_DIR_SRC)
+
+#define K_DM_DSCRA_DIR_SRC_INCR     0
+#define K_DM_DSCRA_DIR_SRC_DECR     1
+#define K_DM_DSCRA_DIR_SRC_CONST    2
+
+#define V_DM_DSCRA_DIR_SRC_INCR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR,S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_DECR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR,S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_CONST    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST,S_DM_DSCRA_DIR_SRC)
+
+
+#define M_DM_DSCRA_ZERO_MEM         _SB_MAKEMASK1(48)
+#define M_DM_DSCRA_PREFETCH         _SB_MAKEMASK1(49)
+#define M_DM_DSCRA_L2C_DEST         _SB_MAKEMASK1(50)
+#define M_DM_DSCRA_L2C_SRC          _SB_MAKEMASK1(51)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_DM_DSCRA_RD_BKOFF	    _SB_MAKEMASK1(52)
+#define M_DM_DSCRA_WR_BKOFF	    _SB_MAKEMASK1(53)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_DM_DSCRA_TCPCS_EN         _SB_MAKEMASK1(54)
+#define M_DM_DSCRA_TCPCS_RES        _SB_MAKEMASK1(55)
+#define M_DM_DSCRA_TCPCS_AP         _SB_MAKEMASK1(56)
+#define M_DM_DSCRA_CRC_EN           _SB_MAKEMASK1(57)
+#define M_DM_DSCRA_CRC_RES          _SB_MAKEMASK1(58)
+#define M_DM_DSCRA_CRC_AP           _SB_MAKEMASK1(59)
+#define M_DM_DSCRA_CRC_DFN          _SB_MAKEMASK1(60)
+#define M_DM_DSCRA_CRC_XBIT         _SB_MAKEMASK1(61)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_DM_DSCRA_RESERVED2        _SB_MAKEMASK(3,61)
+
+/*
+ * Data Mover Descriptor Doubleword "B"  (Table 7-25)
+ */
+
+#define S_DM_DSCRB_SRC_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRB_SRC_ADDR         _SB_MAKEMASK(40,S_DM_DSCRB_SRC_ADDR)
+
+#define S_DM_DSCRB_SRC_LENGTH       _SB_MAKE64(40)
+#define M_DM_DSCRB_SRC_LENGTH       _SB_MAKEMASK(20,S_DM_DSCRB_SRC_LENGTH)
+#define V_DM_DSCRB_SRC_LENGTH(x)    _SB_MAKEVALUE(x,S_DM_DSCRB_SRC_LENGTH)
+#define G_DM_DSCRB_SRC_LENGTH(x)    _SB_GETVALUE(x,S_DM_DSCRB_SRC_LENGTH,M_DM_DSCRB_SRC_LENGTH)
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h
new file mode 100644
index 000000000000..0d9dfac3d7db
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_genbus.h
@@ -0,0 +1,276 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Generic Bus Constants                     File: sb1250_genbus.h
+    *  
+    *  This module contains constants and macros useful for 
+    *  manipulating the SB1250's Generic Bus interface
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_GENBUS_H
+#define _SB1250_GENBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Generic Bus Region Configuration Registers (Table 11-4)
+ */
+
+#define S_IO_RDY_ACTIVE         0
+#define M_IO_RDY_ACTIVE		_SB_MAKEMASK1(S_IO_RDY_ACTIVE)
+
+#define S_IO_ENA_RDY            1
+#define M_IO_ENA_RDY		_SB_MAKEMASK1(S_IO_ENA_RDY)
+
+#define S_IO_WIDTH_SEL		2
+#define M_IO_WIDTH_SEL		_SB_MAKEMASK(2,S_IO_WIDTH_SEL)
+#define K_IO_WIDTH_SEL_1	0
+#define K_IO_WIDTH_SEL_2	1
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_IO_WIDTH_SEL_1L       2
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define K_IO_WIDTH_SEL_4	3
+#define V_IO_WIDTH_SEL(x)	_SB_MAKEVALUE(x,S_IO_WIDTH_SEL)
+#define G_IO_WIDTH_SEL(x)	_SB_GETVALUE(x,S_IO_WIDTH_SEL,M_IO_WIDTH_SEL)
+
+#define S_IO_PARITY_ENA		4
+#define M_IO_PARITY_ENA		_SB_MAKEMASK1(S_IO_PARITY_ENA)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_IO_BURST_EN		5
+#define M_IO_BURST_EN		_SB_MAKEMASK1(S_IO_BURST_EN)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define S_IO_PARITY_ODD		6
+#define M_IO_PARITY_ODD		_SB_MAKEMASK1(S_IO_PARITY_ODD)
+#define S_IO_NONMUX		7
+#define M_IO_NONMUX		_SB_MAKEMASK1(S_IO_NONMUX)
+
+#define S_IO_TIMEOUT		8
+#define M_IO_TIMEOUT		_SB_MAKEMASK(8,S_IO_TIMEOUT)
+#define V_IO_TIMEOUT(x)		_SB_MAKEVALUE(x,S_IO_TIMEOUT)
+#define G_IO_TIMEOUT(x)		_SB_GETVALUE(x,S_IO_TIMEOUT,M_IO_TIMEOUT)
+
+/*
+ * Generic Bus Region Size register (Table 11-5)
+ */
+
+#define S_IO_MULT_SIZE		0
+#define M_IO_MULT_SIZE		_SB_MAKEMASK(12,S_IO_MULT_SIZE)
+#define V_IO_MULT_SIZE(x)	_SB_MAKEVALUE(x,S_IO_MULT_SIZE)
+#define G_IO_MULT_SIZE(x)	_SB_GETVALUE(x,S_IO_MULT_SIZE,M_IO_MULT_SIZE)
+
+#define S_IO_REGSIZE		16	 /* # bits to shift size for this reg */
+
+/*
+ * Generic Bus Region Address (Table 11-6)
+ */
+
+#define S_IO_START_ADDR		0
+#define M_IO_START_ADDR		_SB_MAKEMASK(14,S_IO_START_ADDR)
+#define V_IO_START_ADDR(x)	_SB_MAKEVALUE(x,S_IO_START_ADDR)
+#define G_IO_START_ADDR(x)	_SB_GETVALUE(x,S_IO_START_ADDR,M_IO_START_ADDR)
+
+#define S_IO_ADDRBASE		16	 /* # bits to shift addr for this reg */
+
+/*
+ * Generic Bus Region 0 Timing Registers (Table 11-7)
+ */
+
+#define S_IO_ALE_WIDTH		0
+#define M_IO_ALE_WIDTH		_SB_MAKEMASK(3,S_IO_ALE_WIDTH)
+#define V_IO_ALE_WIDTH(x)	_SB_MAKEVALUE(x,S_IO_ALE_WIDTH)
+#define G_IO_ALE_WIDTH(x)	_SB_GETVALUE(x,S_IO_ALE_WIDTH,M_IO_ALE_WIDTH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_IO_EARLY_CS	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_IO_ALE_TO_CS		4
+#define M_IO_ALE_TO_CS		_SB_MAKEMASK(2,S_IO_ALE_TO_CS)
+#define V_IO_ALE_TO_CS(x)	_SB_MAKEVALUE(x,S_IO_ALE_TO_CS)
+#define G_IO_ALE_TO_CS(x)	_SB_GETVALUE(x,S_IO_ALE_TO_CS,M_IO_ALE_TO_CS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_IO_BURST_WIDTH           _SB_MAKE64(6)
+#define M_IO_BURST_WIDTH           _SB_MAKEMASK(2,S_IO_BURST_WIDTH)
+#define V_IO_BURST_WIDTH(x)        _SB_MAKEVALUE(x,S_IO_BURST_WIDTH)
+#define G_IO_BURST_WIDTH(x)        _SB_GETVALUE(x,S_IO_BURST_WIDTH,M_IO_BURST_WIDTH)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_IO_CS_WIDTH		8
+#define M_IO_CS_WIDTH		_SB_MAKEMASK(5,S_IO_CS_WIDTH)
+#define V_IO_CS_WIDTH(x)	_SB_MAKEVALUE(x,S_IO_CS_WIDTH)
+#define G_IO_CS_WIDTH(x)	_SB_GETVALUE(x,S_IO_CS_WIDTH,M_IO_CS_WIDTH)
+
+#define S_IO_RDY_SMPLE		13
+#define M_IO_RDY_SMPLE		_SB_MAKEMASK(3,S_IO_RDY_SMPLE)
+#define V_IO_RDY_SMPLE(x)	_SB_MAKEVALUE(x,S_IO_RDY_SMPLE)
+#define G_IO_RDY_SMPLE(x)	_SB_GETVALUE(x,S_IO_RDY_SMPLE,M_IO_RDY_SMPLE)
+
+
+/*
+ * Generic Bus Timing 1 Registers (Table 11-8)
+ */
+
+#define S_IO_ALE_TO_WRITE	0
+#define M_IO_ALE_TO_WRITE	_SB_MAKEMASK(3,S_IO_ALE_TO_WRITE)
+#define V_IO_ALE_TO_WRITE(x)	_SB_MAKEVALUE(x,S_IO_ALE_TO_WRITE)
+#define G_IO_ALE_TO_WRITE(x)	_SB_GETVALUE(x,S_IO_ALE_TO_WRITE,M_IO_ALE_TO_WRITE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_IO_RDY_SYNC	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_IO_WRITE_WIDTH	4
+#define M_IO_WRITE_WIDTH	_SB_MAKEMASK(4,S_IO_WRITE_WIDTH)
+#define V_IO_WRITE_WIDTH(x)	_SB_MAKEVALUE(x,S_IO_WRITE_WIDTH)
+#define G_IO_WRITE_WIDTH(x)	_SB_GETVALUE(x,S_IO_WRITE_WIDTH,M_IO_WRITE_WIDTH)
+
+#define S_IO_IDLE_CYCLE		8
+#define M_IO_IDLE_CYCLE		_SB_MAKEMASK(4,S_IO_IDLE_CYCLE)
+#define V_IO_IDLE_CYCLE(x)	_SB_MAKEVALUE(x,S_IO_IDLE_CYCLE)
+#define G_IO_IDLE_CYCLE(x)	_SB_GETVALUE(x,S_IO_IDLE_CYCLE,M_IO_IDLE_CYCLE)
+
+#define S_IO_OE_TO_CS		12
+#define M_IO_OE_TO_CS		_SB_MAKEMASK(2,S_IO_OE_TO_CS)
+#define V_IO_OE_TO_CS(x)	_SB_MAKEVALUE(x,S_IO_OE_TO_CS)
+#define G_IO_OE_TO_CS(x)	_SB_GETVALUE(x,S_IO_OE_TO_CS,M_IO_OE_TO_CS)
+
+#define S_IO_CS_TO_OE		14
+#define M_IO_CS_TO_OE		_SB_MAKEMASK(2,S_IO_CS_TO_OE)
+#define V_IO_CS_TO_OE(x)	_SB_MAKEVALUE(x,S_IO_CS_TO_OE)
+#define G_IO_CS_TO_OE(x)	_SB_GETVALUE(x,S_IO_CS_TO_OE,M_IO_CS_TO_OE)
+
+/*
+ * Generic Bus Interrupt Status Register (Table 11-9)
+ */
+
+#define M_IO_CS_ERR_INT		_SB_MAKEMASK(0,8)
+#define M_IO_CS0_ERR_INT	_SB_MAKEMASK1(0)
+#define M_IO_CS1_ERR_INT	_SB_MAKEMASK1(1)
+#define M_IO_CS2_ERR_INT	_SB_MAKEMASK1(2)
+#define M_IO_CS3_ERR_INT	_SB_MAKEMASK1(3)
+#define M_IO_CS4_ERR_INT	_SB_MAKEMASK1(4)
+#define M_IO_CS5_ERR_INT	_SB_MAKEMASK1(5)
+#define M_IO_CS6_ERR_INT	_SB_MAKEMASK1(6)
+#define M_IO_CS7_ERR_INT	_SB_MAKEMASK1(7)
+
+#define M_IO_RD_PAR_INT		_SB_MAKEMASK1(9)
+#define M_IO_TIMEOUT_INT	_SB_MAKEMASK1(10)
+#define M_IO_ILL_ADDR_INT	_SB_MAKEMASK1(11)
+#define M_IO_MULT_CS_INT	_SB_MAKEMASK1(12)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_IO_COH_ERR	        _SB_MAKEMASK1(14)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * PCMCIA configuration register (Table 12-6)
+ */
+
+#define M_PCMCIA_CFG_ATTRMEM	_SB_MAKEMASK1(0)
+#define M_PCMCIA_CFG_3VEN	_SB_MAKEMASK1(1)
+#define M_PCMCIA_CFG_5VEN	_SB_MAKEMASK1(2)
+#define M_PCMCIA_CFG_VPPEN	_SB_MAKEMASK1(3)
+#define M_PCMCIA_CFG_RESET	_SB_MAKEMASK1(4)
+#define M_PCMCIA_CFG_APWRONEN	_SB_MAKEMASK1(5)
+#define M_PCMCIA_CFG_CDMASK	_SB_MAKEMASK1(6)
+#define M_PCMCIA_CFG_WPMASK	_SB_MAKEMASK1(7)
+#define M_PCMCIA_CFG_RDYMASK	_SB_MAKEMASK1(8)
+#define M_PCMCIA_CFG_PWRCTL	_SB_MAKEMASK1(9)
+
+/*
+ * PCMCIA status register (Table 12-7)
+ */
+
+#define M_PCMCIA_STATUS_CD1	_SB_MAKEMASK1(0)
+#define M_PCMCIA_STATUS_CD2	_SB_MAKEMASK1(1)
+#define M_PCMCIA_STATUS_VS1	_SB_MAKEMASK1(2)
+#define M_PCMCIA_STATUS_VS2	_SB_MAKEMASK1(3)
+#define M_PCMCIA_STATUS_WP	_SB_MAKEMASK1(4)
+#define M_PCMCIA_STATUS_RDY	_SB_MAKEMASK1(5)
+#define M_PCMCIA_STATUS_3VEN	_SB_MAKEMASK1(6)
+#define M_PCMCIA_STATUS_5VEN	_SB_MAKEMASK1(7)
+#define M_PCMCIA_STATUS_CDCHG	_SB_MAKEMASK1(8)
+#define M_PCMCIA_STATUS_WPCHG	_SB_MAKEMASK1(9)
+#define M_PCMCIA_STATUS_RDYCHG	_SB_MAKEMASK1(10)
+
+/*
+ * GPIO Interrupt Type Register (table 13-3)
+ */
+
+#define K_GPIO_INTR_DISABLE	0
+#define K_GPIO_INTR_EDGE	1
+#define K_GPIO_INTR_LEVEL	2
+#define K_GPIO_INTR_SPLIT	3
+
+#define S_GPIO_INTR_TYPEX(n)	(((n)/2)*2)
+#define M_GPIO_INTR_TYPEX(n)	_SB_MAKEMASK(2,S_GPIO_INTR_TYPEX(n))
+#define V_GPIO_INTR_TYPEX(n,x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPEX(n))
+#define G_GPIO_INTR_TYPEX(n,x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPEX(n),M_GPIO_INTR_TYPEX(n))
+
+#define S_GPIO_INTR_TYPE0	0
+#define M_GPIO_INTR_TYPE0	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE0)
+#define V_GPIO_INTR_TYPE0(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE0)
+#define G_GPIO_INTR_TYPE0(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE0,M_GPIO_INTR_TYPE0)
+
+#define S_GPIO_INTR_TYPE2	2
+#define M_GPIO_INTR_TYPE2	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE2)
+#define V_GPIO_INTR_TYPE2(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE2)
+#define G_GPIO_INTR_TYPE2(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE2,M_GPIO_INTR_TYPE2)
+
+#define S_GPIO_INTR_TYPE4	4
+#define M_GPIO_INTR_TYPE4	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE4)
+#define V_GPIO_INTR_TYPE4(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE4)
+#define G_GPIO_INTR_TYPE4(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE4,M_GPIO_INTR_TYPE4)
+
+#define S_GPIO_INTR_TYPE6	6
+#define M_GPIO_INTR_TYPE6	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE6)
+#define V_GPIO_INTR_TYPE6(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE6)
+#define G_GPIO_INTR_TYPE6(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE6,M_GPIO_INTR_TYPE6)
+
+#define S_GPIO_INTR_TYPE8	8
+#define M_GPIO_INTR_TYPE8	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE8)
+#define V_GPIO_INTR_TYPE8(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE8)
+#define G_GPIO_INTR_TYPE8(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE8,M_GPIO_INTR_TYPE8)
+
+#define S_GPIO_INTR_TYPE10	10
+#define M_GPIO_INTR_TYPE10	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE10)
+#define V_GPIO_INTR_TYPE10(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE10)
+#define G_GPIO_INTR_TYPE10(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE10,M_GPIO_INTR_TYPE10)
+
+#define S_GPIO_INTR_TYPE12	12
+#define M_GPIO_INTR_TYPE12	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE12)
+#define V_GPIO_INTR_TYPE12(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE12)
+#define G_GPIO_INTR_TYPE12(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE12,M_GPIO_INTR_TYPE12)
+
+#define S_GPIO_INTR_TYPE14	14
+#define M_GPIO_INTR_TYPE14	_SB_MAKEMASK(2,S_GPIO_INTR_TYPE14)
+#define V_GPIO_INTR_TYPE14(x)	_SB_MAKEVALUE(x,S_GPIO_INTR_TYPE14)
+#define G_GPIO_INTR_TYPE14(x)	_SB_GETVALUE(x,S_GPIO_INTR_TYPE14,M_GPIO_INTR_TYPE14)
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h
new file mode 100644
index 000000000000..c3f74df211f4
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_int.h
@@ -0,0 +1,247 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Interrupt Mapper definitions		File: sb1250_int.h
+    *  
+    *  This module contains constants for manipulating the SB1250's
+    *  interrupt mapper and definitions for the interrupt sources.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_INT_H
+#define _SB1250_INT_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Interrupt Mapper Constants
+    ********************************************************************* */
+
+/*
+ * Interrupt sources (Table 4-8, UM 0.2)
+ * 
+ * First, the interrupt numbers.
+ */
+
+#define K_INT_WATCHDOG_TIMER_0      0
+#define K_INT_WATCHDOG_TIMER_1      1
+#define K_INT_TIMER_0               2
+#define K_INT_TIMER_1               3
+#define K_INT_TIMER_2               4
+#define K_INT_TIMER_3               5
+#define K_INT_SMB_0                 6
+#define K_INT_SMB_1                 7
+#define K_INT_UART_0                8
+#define K_INT_UART_1                9
+#define K_INT_SER_0                 10
+#define K_INT_SER_1                 11
+#define K_INT_PCMCIA                12
+#define K_INT_ADDR_TRAP             13
+#define K_INT_PERF_CNT              14
+#define K_INT_TRACE_FREEZE          15
+#define K_INT_BAD_ECC               16
+#define K_INT_COR_ECC               17
+#define K_INT_IO_BUS                18
+#define K_INT_MAC_0                 19
+#define K_INT_MAC_1                 20
+#define K_INT_MAC_2                 21
+#define K_INT_DM_CH_0               22
+#define K_INT_DM_CH_1               23
+#define K_INT_DM_CH_2               24
+#define K_INT_DM_CH_3               25
+#define K_INT_MBOX_0                26
+#define K_INT_MBOX_1                27
+#define K_INT_MBOX_2                28
+#define K_INT_MBOX_3                29
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_CYCLE_CP0_INT	    30
+#define K_INT_CYCLE_CP1_INT	    31
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define K_INT_GPIO_0                32
+#define K_INT_GPIO_1                33
+#define K_INT_GPIO_2                34
+#define K_INT_GPIO_3                35
+#define K_INT_GPIO_4                36
+#define K_INT_GPIO_5                37
+#define K_INT_GPIO_6                38
+#define K_INT_GPIO_7                39
+#define K_INT_GPIO_8                40
+#define K_INT_GPIO_9                41
+#define K_INT_GPIO_10               42
+#define K_INT_GPIO_11               43
+#define K_INT_GPIO_12               44
+#define K_INT_GPIO_13               45
+#define K_INT_GPIO_14               46
+#define K_INT_GPIO_15               47
+#define K_INT_LDT_FATAL             48
+#define K_INT_LDT_NONFATAL          49
+#define K_INT_LDT_SMI               50
+#define K_INT_LDT_NMI               51
+#define K_INT_LDT_INIT              52
+#define K_INT_LDT_STARTUP           53
+#define K_INT_LDT_EXT               54
+#define K_INT_PCI_ERROR             55
+#define K_INT_PCI_INTA              56
+#define K_INT_PCI_INTB              57
+#define K_INT_PCI_INTC              58
+#define K_INT_PCI_INTD              59
+#define K_INT_SPARE_2               60
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_MAC_0_CH1		    61
+#define K_INT_MAC_1_CH1		    62
+#define K_INT_MAC_2_CH1		    63
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define M_INT_WATCHDOG_TIMER_0      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
+#define M_INT_WATCHDOG_TIMER_1      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
+#define M_INT_TIMER_0               _SB_MAKEMASK1(K_INT_TIMER_0)
+#define M_INT_TIMER_1               _SB_MAKEMASK1(K_INT_TIMER_1)
+#define M_INT_TIMER_2               _SB_MAKEMASK1(K_INT_TIMER_2)
+#define M_INT_TIMER_3               _SB_MAKEMASK1(K_INT_TIMER_3)
+#define M_INT_SMB_0                 _SB_MAKEMASK1(K_INT_SMB_0)
+#define M_INT_SMB_1                 _SB_MAKEMASK1(K_INT_SMB_1)
+#define M_INT_UART_0                _SB_MAKEMASK1(K_INT_UART_0)
+#define M_INT_UART_1                _SB_MAKEMASK1(K_INT_UART_1)
+#define M_INT_SER_0                 _SB_MAKEMASK1(K_INT_SER_0)
+#define M_INT_SER_1                 _SB_MAKEMASK1(K_INT_SER_1)
+#define M_INT_PCMCIA                _SB_MAKEMASK1(K_INT_PCMCIA)
+#define M_INT_ADDR_TRAP             _SB_MAKEMASK1(K_INT_ADDR_TRAP)
+#define M_INT_PERF_CNT              _SB_MAKEMASK1(K_INT_PERF_CNT)
+#define M_INT_TRACE_FREEZE          _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
+#define M_INT_BAD_ECC               _SB_MAKEMASK1(K_INT_BAD_ECC)
+#define M_INT_COR_ECC               _SB_MAKEMASK1(K_INT_COR_ECC)
+#define M_INT_IO_BUS                _SB_MAKEMASK1(K_INT_IO_BUS)
+#define M_INT_MAC_0                 _SB_MAKEMASK1(K_INT_MAC_0)
+#define M_INT_MAC_1                 _SB_MAKEMASK1(K_INT_MAC_1)
+#define M_INT_MAC_2                 _SB_MAKEMASK1(K_INT_MAC_2)
+#define M_INT_DM_CH_0               _SB_MAKEMASK1(K_INT_DM_CH_0)
+#define M_INT_DM_CH_1               _SB_MAKEMASK1(K_INT_DM_CH_1)
+#define M_INT_DM_CH_2               _SB_MAKEMASK1(K_INT_DM_CH_2)
+#define M_INT_DM_CH_3               _SB_MAKEMASK1(K_INT_DM_CH_3)
+#define M_INT_MBOX_0                _SB_MAKEMASK1(K_INT_MBOX_0)
+#define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
+#define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
+#define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
+#define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_INT_GPIO_0                _SB_MAKEMASK1(K_INT_GPIO_0)
+#define M_INT_GPIO_1                _SB_MAKEMASK1(K_INT_GPIO_1)
+#define M_INT_GPIO_2                _SB_MAKEMASK1(K_INT_GPIO_2)
+#define M_INT_GPIO_3                _SB_MAKEMASK1(K_INT_GPIO_3)
+#define M_INT_GPIO_4                _SB_MAKEMASK1(K_INT_GPIO_4)
+#define M_INT_GPIO_5                _SB_MAKEMASK1(K_INT_GPIO_5)
+#define M_INT_GPIO_6                _SB_MAKEMASK1(K_INT_GPIO_6)
+#define M_INT_GPIO_7                _SB_MAKEMASK1(K_INT_GPIO_7)
+#define M_INT_GPIO_8                _SB_MAKEMASK1(K_INT_GPIO_8)
+#define M_INT_GPIO_9                _SB_MAKEMASK1(K_INT_GPIO_9)
+#define M_INT_GPIO_10               _SB_MAKEMASK1(K_INT_GPIO_10)
+#define M_INT_GPIO_11               _SB_MAKEMASK1(K_INT_GPIO_11)
+#define M_INT_GPIO_12               _SB_MAKEMASK1(K_INT_GPIO_12)
+#define M_INT_GPIO_13               _SB_MAKEMASK1(K_INT_GPIO_13)
+#define M_INT_GPIO_14               _SB_MAKEMASK1(K_INT_GPIO_14)
+#define M_INT_GPIO_15               _SB_MAKEMASK1(K_INT_GPIO_15)
+#define M_INT_LDT_FATAL             _SB_MAKEMASK1(K_INT_LDT_FATAL)
+#define M_INT_LDT_NONFATAL          _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
+#define M_INT_LDT_SMI               _SB_MAKEMASK1(K_INT_LDT_SMI)
+#define M_INT_LDT_NMI               _SB_MAKEMASK1(K_INT_LDT_NMI)
+#define M_INT_LDT_INIT              _SB_MAKEMASK1(K_INT_LDT_INIT)
+#define M_INT_LDT_STARTUP           _SB_MAKEMASK1(K_INT_LDT_STARTUP)
+#define M_INT_LDT_EXT               _SB_MAKEMASK1(K_INT_LDT_EXT)
+#define M_INT_PCI_ERROR             _SB_MAKEMASK1(K_INT_PCI_ERROR)
+#define M_INT_PCI_INTA              _SB_MAKEMASK1(K_INT_PCI_INTA)
+#define M_INT_PCI_INTB              _SB_MAKEMASK1(K_INT_PCI_INTB)
+#define M_INT_PCI_INTC              _SB_MAKEMASK1(K_INT_PCI_INTC)
+#define M_INT_PCI_INTD              _SB_MAKEMASK1(K_INT_PCI_INTD)
+#define M_INT_SPARE_2               _SB_MAKEMASK1(K_INT_SPARE_2)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_MAC_0_CH1		    _SB_MAKEMASK1(K_INT_MAC_0_CH1)
+#define M_INT_MAC_1_CH1		    _SB_MAKEMASK1(K_INT_MAC_1_CH1)
+#define M_INT_MAC_2_CH1		    _SB_MAKEMASK1(K_INT_MAC_2_CH1)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Interrupt mappings
+ */
+
+#define K_INT_MAP_I0	0		/* interrupt pins on processor */
+#define K_INT_MAP_I1	1
+#define K_INT_MAP_I2	2
+#define K_INT_MAP_I3	3
+#define K_INT_MAP_I4	4
+#define K_INT_MAP_I5	5
+#define K_INT_MAP_NMI	6		/* nonmaskable */
+#define K_INT_MAP_DINT	7		/* debug interrupt */
+
+/*
+ * LDT Interrupt Set Register (table 4-5)
+ */
+
+#define S_INT_LDT_INTMSG	      0
+#define M_INT_LDT_INTMSG              _SB_MAKEMASK(3,S_INT_LDT_INTMSG)
+#define V_INT_LDT_INTMSG(x)           _SB_MAKEVALUE(x,S_INT_LDT_INTMSG)
+#define G_INT_LDT_INTMSG(x)           _SB_GETVALUE(x,S_INT_LDT_INTMSG,M_INT_LDT_INTMSG)
+
+#define K_INT_LDT_INTMSG_FIXED	      0
+#define K_INT_LDT_INTMSG_ARBITRATED   1
+#define K_INT_LDT_INTMSG_SMI	      2
+#define K_INT_LDT_INTMSG_NMI	      3
+#define K_INT_LDT_INTMSG_INIT	      4
+#define K_INT_LDT_INTMSG_STARTUP      5
+#define K_INT_LDT_INTMSG_EXTINT	      6
+#define K_INT_LDT_INTMSG_RESERVED     7
+
+#define M_INT_LDT_EDGETRIGGER         0
+#define M_INT_LDT_LEVELTRIGGER        _SB_MAKEMASK1(3)
+
+#define M_INT_LDT_PHYSICALDEST        0
+#define M_INT_LDT_LOGICALDEST         _SB_MAKEMASK1(4)
+
+#define S_INT_LDT_INTDEST             5
+#define M_INT_LDT_INTDEST             _SB_MAKEMASK(10,S_INT_LDT_INTDEST)
+#define V_INT_LDT_INTDEST(x)          _SB_MAKEVALUE(x,S_INT_LDT_INTDEST)
+#define G_INT_LDT_INTDEST(x)          _SB_GETVALUE(x,S_INT_LDT_INTDEST,M_INT_LDT_INTDEST)
+
+#define S_INT_LDT_VECTOR              13
+#define M_INT_LDT_VECTOR              _SB_MAKEMASK(8,S_INT_LDT_VECTOR)
+#define V_INT_LDT_VECTOR(x)           _SB_MAKEVALUE(x,S_INT_LDT_VECTOR)
+#define G_INT_LDT_VECTOR(x)           _SB_GETVALUE(x,S_INT_LDT_VECTOR,M_INT_LDT_VECTOR)
+
+/*
+ * Vector format (Table 4-6)
+ */
+
+#define M_LDTVECT_RAISEINT		0x00
+#define M_LDTVECT_RAISEMBOX             0x40
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h
new file mode 100644
index 000000000000..799db828d963
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_l2c.h
@@ -0,0 +1,128 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  L2 Cache constants and macros		File: sb1250_l2c.h
+    *  
+    *  This module contains constants useful for manipulating the
+    *  level 2 cache.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_L2C_H
+#define _SB1250_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Level 2 Cache Tag register (Table 5-3)
+ */
+
+#define S_L2C_TAG_MBZ               0
+#define M_L2C_TAG_MBZ               _SB_MAKEMASK(5,S_L2C_TAG_MBZ)
+
+#define S_L2C_TAG_INDEX             5
+#define M_L2C_TAG_INDEX             _SB_MAKEMASK(12,S_L2C_TAG_INDEX)
+#define V_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x,S_L2C_TAG_INDEX)
+#define G_L2C_TAG_INDEX(x)          _SB_GETVALUE(x,S_L2C_TAG_INDEX,M_L2C_TAG_INDEX)
+
+#define S_L2C_TAG_TAG               17
+#define M_L2C_TAG_TAG               _SB_MAKEMASK(23,S_L2C_TAG_TAG)
+#define V_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x,S_L2C_TAG_TAG)
+#define G_L2C_TAG_TAG(x)            _SB_GETVALUE(x,S_L2C_TAG_TAG,M_L2C_TAG_TAG)
+
+#define S_L2C_TAG_ECC               40
+#define M_L2C_TAG_ECC               _SB_MAKEMASK(6,S_L2C_TAG_ECC)
+#define V_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x,S_L2C_TAG_ECC)
+#define G_L2C_TAG_ECC(x)            _SB_GETVALUE(x,S_L2C_TAG_ECC,M_L2C_TAG_ECC)
+
+#define S_L2C_TAG_WAY               46
+#define M_L2C_TAG_WAY               _SB_MAKEMASK(2,S_L2C_TAG_WAY)
+#define V_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x,S_L2C_TAG_WAY)
+#define G_L2C_TAG_WAY(x)            _SB_GETVALUE(x,S_L2C_TAG_WAY,M_L2C_TAG_WAY)
+
+#define M_L2C_TAG_DIRTY             _SB_MAKEMASK1(48)
+#define M_L2C_TAG_VALID             _SB_MAKEMASK1(49)
+
+/*
+ * Format of level 2 cache management address (table 5-2)
+ */
+
+#define S_L2C_MGMT_INDEX            5
+#define M_L2C_MGMT_INDEX            _SB_MAKEMASK(12,S_L2C_MGMT_INDEX)
+#define V_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x,S_L2C_MGMT_INDEX)
+#define G_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x,S_L2C_MGMT_INDEX,M_L2C_MGMT_INDEX)
+
+#define S_L2C_MGMT_QUADRANT         15
+#define M_L2C_MGMT_QUADRANT         _SB_MAKEMASK(2,S_L2C_MGMT_QUADRANT)
+#define V_L2C_MGMT_QUADRANT(x)      _SB_MAKEVALUE(x,S_L2C_MGMT_QUADRANT)
+#define G_L2C_MGMT_QUADRANT(x)      _SB_GETVALUE(x,S_L2C_MGMT_QUADRANT,M_L2C_MGMT_QUADRANT)
+
+#define S_L2C_MGMT_HALF		    16
+#define M_L2C_MGMT_HALF	            _SB_MAKEMASK(1,S_L2C_MGMT_HALF)
+
+#define S_L2C_MGMT_WAY              17
+#define M_L2C_MGMT_WAY              _SB_MAKEMASK(2,S_L2C_MGMT_WAY)
+#define V_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x,S_L2C_MGMT_WAY)
+#define G_L2C_MGMT_WAY(x)           _SB_GETVALUE(x,S_L2C_MGMT_WAY,M_L2C_MGMT_WAY)
+
+#define S_L2C_MGMT_TAG              21
+#define M_L2C_MGMT_TAG              _SB_MAKEMASK(6,S_L2C_MGMT_TAG)
+#define V_L2C_MGMT_TAG(x)           _SB_MAKEVALUE(x,S_L2C_MGMT_TAG)
+#define G_L2C_MGMT_TAG(x)           _SB_GETVALUE(x,S_L2C_MGMT_TAG,M_L2C_MGMT_TAG)
+
+#define M_L2C_MGMT_DIRTY            _SB_MAKEMASK1(19)
+#define M_L2C_MGMT_VALID            _SB_MAKEMASK1(20)
+
+#define A_L2C_MGMT_TAG_BASE         0x00D0000000
+
+#define L2C_ENTRIES_PER_WAY       4096
+#define L2C_NUM_WAYS              4
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * L2 Read Misc. register (A_L2_READ_MISC)
+ */
+#define S_L2C_MISC_NO_WAY		10
+#define M_L2C_MISC_NO_WAY		_SB_MAKEMASK(4,S_L2C_MISC_NO_WAY)
+#define V_L2C_MISC_NO_WAY(x)		_SB_MAKEVALUE(x,S_L2C_MISC_NO_WAY)
+#define G_L2C_MISC_NO_WAY(x)		_SB_GETVALUE(x,S_L2C_MISC_NO_WAY,M_L2C_MISC_NO_WAY)
+
+#define M_L2C_MISC_ECC_CLEANUP_DIS	_SB_MAKEMASK1(9)
+#define M_L2C_MISC_MC_PRIO_LOW		_SB_MAKEMASK1(8)
+#define M_L2C_MISC_SOFT_DISABLE_T	_SB_MAKEMASK1(7)
+#define M_L2C_MISC_SOFT_DISABLE_B	_SB_MAKEMASK1(6)
+#define M_L2C_MISC_SOFT_DISABLE_R	_SB_MAKEMASK1(5)
+#define M_L2C_MISC_SOFT_DISABLE_L	_SB_MAKEMASK1(4)
+#define M_L2C_MISC_SCACHE_DISABLE_T	_SB_MAKEMASK1(3)
+#define M_L2C_MISC_SCACHE_DISABLE_B	_SB_MAKEMASK1(2)
+#define M_L2C_MISC_SCACHE_DISABLE_R	_SB_MAKEMASK1(1)
+#define M_L2C_MISC_SCACHE_DISABLE_L	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h
new file mode 100644
index 000000000000..d8753885df17
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_ldt.h
@@ -0,0 +1,425 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  LDT constants				File: sb1250_ldt.h
+    *  
+    *  This module contains constants and macros to describe 
+    *  the LDT interface on the SB1250.  
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_LDT_H
+#define _SB1250_LDT_H
+
+#include "sb1250_defs.h"
+
+#define K_LDT_VENDOR_SIBYTE	0x166D
+#define K_LDT_DEVICE_SB1250	0x0002
+
+/*
+ * LDT Interface Type 1 (bridge) configuration header
+ */
+
+#define R_LDT_TYPE1_DEVICEID	0x0000
+#define R_LDT_TYPE1_CMDSTATUS	0x0004
+#define R_LDT_TYPE1_CLASSREV	0x0008
+#define R_LDT_TYPE1_DEVHDR	0x000C
+#define R_LDT_TYPE1_BAR0	0x0010	/* not used */
+#define R_LDT_TYPE1_BAR1	0x0014	/* not used */
+
+#define R_LDT_TYPE1_BUSID	0x0018	/* bus ID register */
+#define R_LDT_TYPE1_SECSTATUS	0x001C	/* secondary status / I/O base/limit */
+#define R_LDT_TYPE1_MEMLIMIT	0x0020
+#define R_LDT_TYPE1_PREFETCH	0x0024
+#define R_LDT_TYPE1_PREF_BASE	0x0028
+#define R_LDT_TYPE1_PREF_LIMIT	0x002C
+#define R_LDT_TYPE1_IOLIMIT	0x0030
+#define R_LDT_TYPE1_CAPPTR	0x0034
+#define R_LDT_TYPE1_ROMADDR	0x0038
+#define R_LDT_TYPE1_BRCTL	0x003C
+#define R_LDT_TYPE1_CMD		0x0040
+#define R_LDT_TYPE1_LINKCTRL	0x0044
+#define R_LDT_TYPE1_LINKFREQ	0x0048
+#define R_LDT_TYPE1_RESERVED1	0x004C
+#define R_LDT_TYPE1_SRICMD	0x0050
+#define R_LDT_TYPE1_SRITXNUM	0x0054
+#define R_LDT_TYPE1_SRIRXNUM	0x0058
+#define R_LDT_TYPE1_ERRSTATUS   0x0068
+#define R_LDT_TYPE1_SRICTRL	0x006C
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_LDT_TYPE1_ADDSTATUS	0x0070
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define R_LDT_TYPE1_TXBUFCNT	0x00C8
+#define R_LDT_TYPE1_EXPCRC	0x00DC
+#define R_LDT_TYPE1_RXCRC	0x00F0
+
+
+/*
+ * LDT Device ID register
+ */
+
+#define S_LDT_DEVICEID_VENDOR		0
+#define M_LDT_DEVICEID_VENDOR		_SB_MAKEMASK_32(16,S_LDT_DEVICEID_VENDOR)
+#define V_LDT_DEVICEID_VENDOR(x)	_SB_MAKEVALUE_32(x,S_LDT_DEVICEID_VENDOR)
+#define G_LDT_DEVICEID_VENDOR(x)	_SB_GETVALUE_32(x,S_LDT_DEVICEID_VENDOR,M_LDT_DEVICEID_VENDOR)
+
+#define S_LDT_DEVICEID_DEVICEID		16
+#define M_LDT_DEVICEID_DEVICEID		_SB_MAKEMASK_32(16,S_LDT_DEVICEID_DEVICEID)
+#define V_LDT_DEVICEID_DEVICEID(x)	_SB_MAKEVALUE_32(x,S_LDT_DEVICEID_DEVICEID)
+#define G_LDT_DEVICEID_DEVICEID(x)	_SB_GETVALUE_32(x,S_LDT_DEVICEID_DEVICEID,M_LDT_DEVICEID_DEVICEID)
+
+
+/*
+ * LDT Command Register (Table 8-13)
+ */
+
+#define M_LDT_CMD_IOSPACE_EN		_SB_MAKEMASK1_32(0)
+#define M_LDT_CMD_MEMSPACE_EN		_SB_MAKEMASK1_32(1)
+#define M_LDT_CMD_MASTER_EN		_SB_MAKEMASK1_32(2)
+#define M_LDT_CMD_SPECCYC_EN		_SB_MAKEMASK1_32(3)
+#define M_LDT_CMD_MEMWRINV_EN		_SB_MAKEMASK1_32(4)
+#define M_LDT_CMD_VGAPALSNP_EN		_SB_MAKEMASK1_32(5)
+#define M_LDT_CMD_PARERRRESP		_SB_MAKEMASK1_32(6)
+#define M_LDT_CMD_WAITCYCCTRL		_SB_MAKEMASK1_32(7)
+#define M_LDT_CMD_SERR_EN		_SB_MAKEMASK1_32(8)
+#define M_LDT_CMD_FASTB2B_EN		_SB_MAKEMASK1_32(9)
+
+/*
+ * LDT class and revision registers
+ */
+
+#define S_LDT_CLASSREV_REV		0
+#define M_LDT_CLASSREV_REV		_SB_MAKEMASK_32(8,S_LDT_CLASSREV_REV)
+#define V_LDT_CLASSREV_REV(x)		_SB_MAKEVALUE_32(x,S_LDT_CLASSREV_REV)
+#define G_LDT_CLASSREV_REV(x)		_SB_GETVALUE_32(x,S_LDT_CLASSREV_REV,M_LDT_CLASSREV_REV)
+
+#define S_LDT_CLASSREV_CLASS		8
+#define M_LDT_CLASSREV_CLASS		_SB_MAKEMASK_32(24,S_LDT_CLASSREV_CLASS)
+#define V_LDT_CLASSREV_CLASS(x)		_SB_MAKEVALUE_32(x,S_LDT_CLASSREV_CLASS)
+#define G_LDT_CLASSREV_CLASS(x)		_SB_GETVALUE_32(x,S_LDT_CLASSREV_CLASS,M_LDT_CLASSREV_CLASS)
+
+#define K_LDT_REV			0x01
+#define K_LDT_CLASS			0x060000
+
+/*
+ * Device Header (offset 0x0C)
+ */
+
+#define S_LDT_DEVHDR_CLINESZ		0
+#define M_LDT_DEVHDR_CLINESZ		_SB_MAKEMASK_32(8,S_LDT_DEVHDR_CLINESZ)
+#define V_LDT_DEVHDR_CLINESZ(x)		_SB_MAKEVALUE_32(x,S_LDT_DEVHDR_CLINESZ)
+#define G_LDT_DEVHDR_CLINESZ(x)		_SB_GETVALUE_32(x,S_LDT_DEVHDR_CLINESZ,M_LDT_DEVHDR_CLINESZ)
+
+#define S_LDT_DEVHDR_LATTMR		8
+#define M_LDT_DEVHDR_LATTMR		_SB_MAKEMASK_32(8,S_LDT_DEVHDR_LATTMR)
+#define V_LDT_DEVHDR_LATTMR(x)		_SB_MAKEVALUE_32(x,S_LDT_DEVHDR_LATTMR)
+#define G_LDT_DEVHDR_LATTMR(x)		_SB_GETVALUE_32(x,S_LDT_DEVHDR_LATTMR,M_LDT_DEVHDR_LATTMR)
+
+#define S_LDT_DEVHDR_HDRTYPE		16
+#define M_LDT_DEVHDR_HDRTYPE		_SB_MAKEMASK_32(8,S_LDT_DEVHDR_HDRTYPE)
+#define V_LDT_DEVHDR_HDRTYPE(x)		_SB_MAKEVALUE_32(x,S_LDT_DEVHDR_HDRTYPE)
+#define G_LDT_DEVHDR_HDRTYPE(x)		_SB_GETVALUE_32(x,S_LDT_DEVHDR_HDRTYPE,M_LDT_DEVHDR_HDRTYPE)
+
+#define K_LDT_DEVHDR_HDRTYPE_TYPE1	1
+
+#define S_LDT_DEVHDR_BIST		24
+#define M_LDT_DEVHDR_BIST		_SB_MAKEMASK_32(8,S_LDT_DEVHDR_BIST)
+#define V_LDT_DEVHDR_BIST(x)		_SB_MAKEVALUE_32(x,S_LDT_DEVHDR_BIST)
+#define G_LDT_DEVHDR_BIST(x)		_SB_GETVALUE_32(x,S_LDT_DEVHDR_BIST,M_LDT_DEVHDR_BIST)
+
+
+
+/*
+ * LDT Status Register (Table 8-14).  Note that these constants
+ * assume you've read the command and status register 
+ * together (32-bit read at offset 0x04)
+ *
+ * These bits also apply to the secondary status
+ * register (Table 8-15), offset 0x1C
+ */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_STATUS_VGAEN		_SB_MAKEMASK1_32(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_LDT_STATUS_CAPLIST		_SB_MAKEMASK1_32(20)
+#define M_LDT_STATUS_66MHZCAP		_SB_MAKEMASK1_32(21)
+#define M_LDT_STATUS_RESERVED2		_SB_MAKEMASK1_32(22)
+#define M_LDT_STATUS_FASTB2BCAP		_SB_MAKEMASK1_32(23)
+#define M_LDT_STATUS_MSTRDPARERR	_SB_MAKEMASK1_32(24)
+
+#define S_LDT_STATUS_DEVSELTIMING	25
+#define M_LDT_STATUS_DEVSELTIMING	_SB_MAKEMASK_32(2,S_LDT_STATUS_DEVSELTIMING)
+#define V_LDT_STATUS_DEVSELTIMING(x)	_SB_MAKEVALUE_32(x,S_LDT_STATUS_DEVSELTIMING)
+#define G_LDT_STATUS_DEVSELTIMING(x)	_SB_GETVALUE_32(x,S_LDT_STATUS_DEVSELTIMING,M_LDT_STATUS_DEVSELTIMING)
+
+#define M_LDT_STATUS_SIGDTGTABORT	_SB_MAKEMASK1_32(27)
+#define M_LDT_STATUS_RCVDTGTABORT	_SB_MAKEMASK1_32(28)
+#define M_LDT_STATUS_RCVDMSTRABORT	_SB_MAKEMASK1_32(29)
+#define M_LDT_STATUS_SIGDSERR		_SB_MAKEMASK1_32(30)
+#define M_LDT_STATUS_DETPARERR		_SB_MAKEMASK1_32(31)
+
+/*
+ * Bridge Control Register (Table 8-16).  Note that these 
+ * constants assume you've read the register as a 32-bit 
+ * read (offset 0x3C)
+ */
+
+#define M_LDT_BRCTL_PARERRRESP_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_BRCTL_SERR_EN		_SB_MAKEMASK1_32(17)
+#define M_LDT_BRCTL_ISA_EN		_SB_MAKEMASK1_32(18)
+#define M_LDT_BRCTL_VGA_EN		_SB_MAKEMASK1_32(19)
+#define M_LDT_BRCTL_MSTRABORTMODE	_SB_MAKEMASK1_32(21)
+#define M_LDT_BRCTL_SECBUSRESET		_SB_MAKEMASK1_32(22)
+#define M_LDT_BRCTL_FASTB2B_EN		_SB_MAKEMASK1_32(23)
+#define M_LDT_BRCTL_PRIDISCARD		_SB_MAKEMASK1_32(24)
+#define M_LDT_BRCTL_SECDISCARD		_SB_MAKEMASK1_32(25)
+#define M_LDT_BRCTL_DISCARDSTAT		_SB_MAKEMASK1_32(26)
+#define M_LDT_BRCTL_DISCARDSERR_EN	_SB_MAKEMASK1_32(27)
+
+/*
+ * LDT Command Register (Table 8-17).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x40
+ */
+
+#define M_LDT_CMD_WARMRESET		_SB_MAKEMASK1_32(16)
+#define M_LDT_CMD_DOUBLEENDED		_SB_MAKEMASK1_32(17)
+
+#define S_LDT_CMD_CAPTYPE		29
+#define M_LDT_CMD_CAPTYPE		_SB_MAKEMASK_32(3,S_LDT_CMD_CAPTYPE)
+#define V_LDT_CMD_CAPTYPE(x)		_SB_MAKEVALUE_32(x,S_LDT_CMD_CAPTYPE)
+#define G_LDT_CMD_CAPTYPE(x)		_SB_GETVALUE_32(x,S_LDT_CMD_CAPTYPE,M_LDT_CMD_CAPTYPE)
+
+/*
+ * LDT link control register (Table 8-18), and (Table 8-19)
+ */
+
+#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_LINKCTRL_CRCSTARTTEST	_SB_MAKEMASK1_32(2)
+#define M_LDT_LINKCTRL_CRCFORCEERR	_SB_MAKEMASK1_32(3)
+#define M_LDT_LINKCTRL_LINKFAIL		_SB_MAKEMASK1_32(4)
+#define M_LDT_LINKCTRL_INITDONE		_SB_MAKEMASK1_32(5)
+#define M_LDT_LINKCTRL_EOC		_SB_MAKEMASK1_32(6)
+#define M_LDT_LINKCTRL_XMITOFF		_SB_MAKEMASK1_32(7)
+
+#define S_LDT_LINKCTRL_CRCERR		8
+#define M_LDT_LINKCTRL_CRCERR		_SB_MAKEMASK_32(4,S_LDT_LINKCTRL_CRCERR)
+#define V_LDT_LINKCTRL_CRCERR(x)	_SB_MAKEVALUE_32(x,S_LDT_LINKCTRL_CRCERR)
+#define G_LDT_LINKCTRL_CRCERR(x)	_SB_GETVALUE_32(x,S_LDT_LINKCTRL_CRCERR,M_LDT_LINKCTRL_CRCERR)
+
+#define S_LDT_LINKCTRL_MAXIN		16
+#define M_LDT_LINKCTRL_MAXIN		_SB_MAKEMASK_32(3,S_LDT_LINKCTRL_MAXIN)
+#define V_LDT_LINKCTRL_MAXIN(x)		_SB_MAKEVALUE_32(x,S_LDT_LINKCTRL_MAXIN)
+#define G_LDT_LINKCTRL_MAXIN(x)		_SB_GETVALUE_32(x,S_LDT_LINKCTRL_MAXIN,M_LDT_LINKCTRL_MAXIN)
+
+#define M_LDT_LINKCTRL_DWFCLN		_SB_MAKEMASK1_32(19)
+
+#define S_LDT_LINKCTRL_MAXOUT		20
+#define M_LDT_LINKCTRL_MAXOUT		_SB_MAKEMASK_32(3,S_LDT_LINKCTRL_MAXOUT)
+#define V_LDT_LINKCTRL_MAXOUT(x)	_SB_MAKEVALUE_32(x,S_LDT_LINKCTRL_MAXOUT)
+#define G_LDT_LINKCTRL_MAXOUT(x)	_SB_GETVALUE_32(x,S_LDT_LINKCTRL_MAXOUT,M_LDT_LINKCTRL_MAXOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT		_SB_MAKEMASK1_32(23)
+
+#define S_LDT_LINKCTRL_WIDTHIN		24
+#define M_LDT_LINKCTRL_WIDTHIN		_SB_MAKEMASK_32(3,S_LDT_LINKCTRL_WIDTHIN)
+#define V_LDT_LINKCTRL_WIDTHIN(x)	_SB_MAKEVALUE_32(x,S_LDT_LINKCTRL_WIDTHIN)
+#define G_LDT_LINKCTRL_WIDTHIN(x)	_SB_GETVALUE_32(x,S_LDT_LINKCTRL_WIDTHIN,M_LDT_LINKCTRL_WIDTHIN)
+
+#define M_LDT_LINKCTRL_DWFCLIN_EN	_SB_MAKEMASK1_32(27)
+
+#define S_LDT_LINKCTRL_WIDTHOUT		28
+#define M_LDT_LINKCTRL_WIDTHOUT		_SB_MAKEMASK_32(3,S_LDT_LINKCTRL_WIDTHOUT)
+#define V_LDT_LINKCTRL_WIDTHOUT(x)	_SB_MAKEVALUE_32(x,S_LDT_LINKCTRL_WIDTHOUT)
+#define G_LDT_LINKCTRL_WIDTHOUT(x)	_SB_GETVALUE_32(x,S_LDT_LINKCTRL_WIDTHOUT,M_LDT_LINKCTRL_WIDTHOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT_EN	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Link frequency register  (Table 8-20) offset 0x48
+ */
+
+#define S_LDT_LINKFREQ_FREQ		8
+#define M_LDT_LINKFREQ_FREQ		_SB_MAKEMASK_32(4,S_LDT_LINKFREQ_FREQ)
+#define V_LDT_LINKFREQ_FREQ(x)		_SB_MAKEVALUE_32(x,S_LDT_LINKFREQ_FREQ)
+#define G_LDT_LINKFREQ_FREQ(x)		_SB_GETVALUE_32(x,S_LDT_LINKFREQ_FREQ,M_LDT_LINKFREQ_FREQ)
+
+#define K_LDT_LINKFREQ_200MHZ		0
+#define K_LDT_LINKFREQ_300MHZ		1
+#define K_LDT_LINKFREQ_400MHZ		2
+#define K_LDT_LINKFREQ_500MHZ		3
+#define K_LDT_LINKFREQ_600MHZ		4
+#define K_LDT_LINKFREQ_800MHZ		5
+#define K_LDT_LINKFREQ_1000MHZ		6
+
+/*
+ * LDT SRI Command Register (Table 8-21).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x50
+ */
+
+#define M_LDT_SRICMD_SIPREADY		_SB_MAKEMASK1_32(16)
+#define M_LDT_SRICMD_SYNCPTRCTL		_SB_MAKEMASK1_32(17)
+#define M_LDT_SRICMD_REDUCESYNCZERO	_SB_MAKEMASK1_32(18)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_LDT_SRICMD_DISSTARVATIONCNT	_SB_MAKEMASK1_32(19)	/* PASS1 */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_SRICMD_DISMULTTXVLD	_SB_MAKEMASK1_32(19)
+#define M_LDT_SRICMD_EXPENDIAN		_SB_MAKEMASK1_32(26)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+#define S_LDT_SRICMD_RXMARGIN		20
+#define M_LDT_SRICMD_RXMARGIN		_SB_MAKEMASK_32(5,S_LDT_SRICMD_RXMARGIN)
+#define V_LDT_SRICMD_RXMARGIN(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICMD_RXMARGIN)
+#define G_LDT_SRICMD_RXMARGIN(x)	_SB_GETVALUE_32(x,S_LDT_SRICMD_RXMARGIN,M_LDT_SRICMD_RXMARGIN)
+
+#define M_LDT_SRICMD_LDTPLLCOMPAT	_SB_MAKEMASK1_32(25)
+
+#define S_LDT_SRICMD_TXINITIALOFFSET	28
+#define M_LDT_SRICMD_TXINITIALOFFSET	_SB_MAKEMASK_32(3,S_LDT_SRICMD_TXINITIALOFFSET)
+#define V_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICMD_TXINITIALOFFSET)
+#define G_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_GETVALUE_32(x,S_LDT_SRICMD_TXINITIALOFFSET,M_LDT_SRICMD_TXINITIALOFFSET)
+
+#define M_LDT_SRICMD_LINKFREQDIRECT	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Error control and status register (Table 8-22) (Table 8-23)
+ */
+
+#define M_LDT_ERRCTL_PROTFATAL_EN	_SB_MAKEMASK1_32(0)
+#define M_LDT_ERRCTL_PROTNONFATAL_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN	_SB_MAKEMASK1_32(2)
+#define M_LDT_ERRCTL_OVFFATAL_EN	_SB_MAKEMASK1_32(3)
+#define M_LDT_ERRCTL_OVFNONFATAL_EN	_SB_MAKEMASK1_32(4)
+#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN	_SB_MAKEMASK1_32(5)
+#define M_LDT_ERRCTL_EOCNXAFATAL_EN	_SB_MAKEMASK1_32(6)
+#define M_LDT_ERRCTL_EOCNXANONFATAL_EN	_SB_MAKEMASK1_32(7)
+#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(8)
+#define M_LDT_ERRCTL_CRCFATAL_EN	_SB_MAKEMASK1_32(9)
+#define M_LDT_ERRCTL_CRCNONFATAL_EN	_SB_MAKEMASK1_32(10)
+#define M_LDT_ERRCTL_SERRFATAL_EN	_SB_MAKEMASK1_32(11)
+#define M_LDT_ERRCTL_SRCTAGFATAL_EN	_SB_MAKEMASK1_32(12)
+#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN	_SB_MAKEMASK1_32(13)
+#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN	_SB_MAKEMASK1_32(14)
+#define M_LDT_ERRCTL_MAPNXAFATAL_EN	_SB_MAKEMASK1_32(15)
+#define M_LDT_ERRCTL_MAPNXANONFATAL_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(17)
+
+#define M_LDT_ERRCTL_PROTOERR		_SB_MAKEMASK1_32(24)
+#define M_LDT_ERRCTL_OVFERR		_SB_MAKEMASK1_32(25)
+#define M_LDT_ERRCTL_EOCNXAERR		_SB_MAKEMASK1_32(26)
+#define M_LDT_ERRCTL_SRCTAGERR		_SB_MAKEMASK1_32(27)
+#define M_LDT_ERRCTL_MAPNXAERR		_SB_MAKEMASK1_32(28)
+
+/*
+ * SRI Control register (Table 8-24, 8-25)  Offset 0x6C
+ */
+
+#define S_LDT_SRICTRL_NEEDRESP		0
+#define M_LDT_SRICTRL_NEEDRESP		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_NEEDRESP)
+#define V_LDT_SRICTRL_NEEDRESP(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_NEEDRESP)
+#define G_LDT_SRICTRL_NEEDRESP(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_NEEDRESP,M_LDT_SRICTRL_NEEDRESP)
+
+#define S_LDT_SRICTRL_NEEDNPREQ		2
+#define M_LDT_SRICTRL_NEEDNPREQ		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_NEEDNPREQ)
+#define V_LDT_SRICTRL_NEEDNPREQ(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_NEEDNPREQ)
+#define G_LDT_SRICTRL_NEEDNPREQ(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_NEEDNPREQ,M_LDT_SRICTRL_NEEDNPREQ)
+
+#define S_LDT_SRICTRL_NEEDPREQ		4
+#define M_LDT_SRICTRL_NEEDPREQ		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_NEEDPREQ)
+#define V_LDT_SRICTRL_NEEDPREQ(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_NEEDPREQ)
+#define G_LDT_SRICTRL_NEEDPREQ(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_NEEDPREQ,M_LDT_SRICTRL_NEEDPREQ)
+
+#define S_LDT_SRICTRL_WANTRESP		8
+#define M_LDT_SRICTRL_WANTRESP		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_WANTRESP)
+#define V_LDT_SRICTRL_WANTRESP(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_WANTRESP)
+#define G_LDT_SRICTRL_WANTRESP(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_WANTRESP,M_LDT_SRICTRL_WANTRESP)
+
+#define S_LDT_SRICTRL_WANTNPREQ		10
+#define M_LDT_SRICTRL_WANTNPREQ		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_WANTNPREQ)
+#define V_LDT_SRICTRL_WANTNPREQ(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_WANTNPREQ)
+#define G_LDT_SRICTRL_WANTNPREQ(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_WANTNPREQ,M_LDT_SRICTRL_WANTNPREQ)
+
+#define S_LDT_SRICTRL_WANTPREQ		12
+#define M_LDT_SRICTRL_WANTPREQ		_SB_MAKEMASK_32(2,S_LDT_SRICTRL_WANTPREQ)
+#define V_LDT_SRICTRL_WANTPREQ(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_WANTPREQ)
+#define G_LDT_SRICTRL_WANTPREQ(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_WANTPREQ,M_LDT_SRICTRL_WANTPREQ)
+
+#define S_LDT_SRICTRL_BUFRELSPACE	16
+#define M_LDT_SRICTRL_BUFRELSPACE	_SB_MAKEMASK_32(4,S_LDT_SRICTRL_BUFRELSPACE)
+#define V_LDT_SRICTRL_BUFRELSPACE(x)	_SB_MAKEVALUE_32(x,S_LDT_SRICTRL_BUFRELSPACE)
+#define G_LDT_SRICTRL_BUFRELSPACE(x)	_SB_GETVALUE_32(x,S_LDT_SRICTRL_BUFRELSPACE,M_LDT_SRICTRL_BUFRELSPACE)
+
+/*
+ * LDT SRI Transmit Buffer Count register (Table 8-26)
+ */
+
+#define S_LDT_TXBUFCNT_PCMD		0
+#define M_LDT_TXBUFCNT_PCMD		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_PCMD)
+#define V_LDT_TXBUFCNT_PCMD(x)		_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_PCMD)
+#define G_LDT_TXBUFCNT_PCMD(x)		_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_PCMD,M_LDT_TXBUFCNT_PCMD)
+
+#define S_LDT_TXBUFCNT_PDATA		4
+#define M_LDT_TXBUFCNT_PDATA		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_PDATA)
+#define V_LDT_TXBUFCNT_PDATA(x)		_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_PDATA)
+#define G_LDT_TXBUFCNT_PDATA(x)		_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_PDATA,M_LDT_TXBUFCNT_PDATA)
+
+#define S_LDT_TXBUFCNT_NPCMD		8
+#define M_LDT_TXBUFCNT_NPCMD		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_NPCMD)
+#define V_LDT_TXBUFCNT_NPCMD(x)		_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_NPCMD)
+#define G_LDT_TXBUFCNT_NPCMD(x)		_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_NPCMD,M_LDT_TXBUFCNT_NPCMD)
+
+#define S_LDT_TXBUFCNT_NPDATA		12
+#define M_LDT_TXBUFCNT_NPDATA		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_NPDATA)
+#define V_LDT_TXBUFCNT_NPDATA(x)	_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_NPDATA)
+#define G_LDT_TXBUFCNT_NPDATA(x)	_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_NPDATA,M_LDT_TXBUFCNT_NPDATA)
+
+#define S_LDT_TXBUFCNT_RCMD		16
+#define M_LDT_TXBUFCNT_RCMD		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_RCMD)
+#define V_LDT_TXBUFCNT_RCMD(x)		_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_RCMD)
+#define G_LDT_TXBUFCNT_RCMD(x)		_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_RCMD,M_LDT_TXBUFCNT_RCMD)
+
+#define S_LDT_TXBUFCNT_RDATA		20
+#define M_LDT_TXBUFCNT_RDATA		_SB_MAKEMASK_32(4,S_LDT_TXBUFCNT_RDATA)
+#define V_LDT_TXBUFCNT_RDATA(x)		_SB_MAKEVALUE_32(x,S_LDT_TXBUFCNT_RDATA)
+#define G_LDT_TXBUFCNT_RDATA(x)		_SB_GETVALUE_32(x,S_LDT_TXBUFCNT_RDATA,M_LDT_TXBUFCNT_RDATA)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Additional Status Register
+ */
+
+#define S_LDT_ADDSTATUS_TGTDONE		0
+#define M_LDT_ADDSTATUS_TGTDONE		_SB_MAKEMASK_32(8,S_LDT_ADDSTATUS_TGTDONE)
+#define V_LDT_ADDSTATUS_TGTDONE(x)	_SB_MAKEVALUE_32(x,S_LDT_ADDSTATUS_TGTDONE)
+#define G_LDT_ADDSTATUS_TGTDONE(x)	_SB_GETVALUE_32(x,S_LDT_ADDSTATUS_TGTDONE,M_LDT_ADDSTATUS_TGTDONE)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h
new file mode 100644
index 000000000000..81f603f03a98
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_mac.h
@@ -0,0 +1,643 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  MAC constants and macros			File: sb1250_mac.h
+    *  
+    *  This module contains constants and macros for the SB1250's
+    *  ethernet controllers.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MAC_H
+#define _SB1250_MAC_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Ethernet MAC Registers
+    ********************************************************************* */
+
+/*
+ * MAC Configuration Register (Table 9-13)
+ * Register: MAC_CFG_0
+ * Register: MAC_CFG_1
+ * Register: MAC_CFG_2
+ */
+
+
+#define M_MAC_RESERVED0             _SB_MAKEMASK1(0)
+#define M_MAC_TX_HOLD_SOP_EN        _SB_MAKEMASK1(1)
+#define M_MAC_RETRY_EN              _SB_MAKEMASK1(2)
+#define M_MAC_RET_DRPREQ_EN         _SB_MAKEMASK1(3)
+#define M_MAC_RET_UFL_EN            _SB_MAKEMASK1(4)
+#define M_MAC_BURST_EN              _SB_MAKEMASK1(5)
+
+#define S_MAC_TX_PAUSE              _SB_MAKE64(6)
+#define M_MAC_TX_PAUSE_CNT          _SB_MAKEMASK(3,S_MAC_TX_PAUSE)
+#define V_MAC_TX_PAUSE_CNT(x)       _SB_MAKEVALUE(x,S_MAC_TX_PAUSE)
+
+#define K_MAC_TX_PAUSE_CNT_512      0
+#define K_MAC_TX_PAUSE_CNT_1K       1
+#define K_MAC_TX_PAUSE_CNT_2K       2
+#define K_MAC_TX_PAUSE_CNT_4K       3
+#define K_MAC_TX_PAUSE_CNT_8K       4
+#define K_MAC_TX_PAUSE_CNT_16K      5
+#define K_MAC_TX_PAUSE_CNT_32K      6
+#define K_MAC_TX_PAUSE_CNT_64K      7
+
+#define V_MAC_TX_PAUSE_CNT_512      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
+#define V_MAC_TX_PAUSE_CNT_1K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
+#define V_MAC_TX_PAUSE_CNT_2K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
+#define V_MAC_TX_PAUSE_CNT_4K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
+#define V_MAC_TX_PAUSE_CNT_8K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
+#define V_MAC_TX_PAUSE_CNT_16K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
+#define V_MAC_TX_PAUSE_CNT_32K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
+#define V_MAC_TX_PAUSE_CNT_64K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
+
+#define M_MAC_RESERVED1             _SB_MAKEMASK(8,9)
+
+#define M_MAC_AP_STAT_EN            _SB_MAKEMASK1(17)
+#define M_MAC_RESERVED2		    _SB_MAKEMASK1(18)
+#define M_MAC_DRP_ERRPKT_EN         _SB_MAKEMASK1(19)
+#define M_MAC_DRP_FCSERRPKT_EN      _SB_MAKEMASK1(20)
+#define M_MAC_DRP_CODEERRPKT_EN     _SB_MAKEMASK1(21)
+#define M_MAC_DRP_DRBLERRPKT_EN     _SB_MAKEMASK1(22)
+#define M_MAC_DRP_RNTPKT_EN         _SB_MAKEMASK1(23)
+#define M_MAC_DRP_OSZPKT_EN         _SB_MAKEMASK1(24)
+#define M_MAC_DRP_LENERRPKT_EN      _SB_MAKEMASK1(25)
+
+#define M_MAC_RESERVED3             _SB_MAKEMASK(6,26)
+
+#define M_MAC_BYPASS_SEL            _SB_MAKEMASK1(32)
+#define M_MAC_HDX_EN                _SB_MAKEMASK1(33)
+
+#define S_MAC_SPEED_SEL             _SB_MAKE64(34)
+#define M_MAC_SPEED_SEL             _SB_MAKEMASK(2,S_MAC_SPEED_SEL)
+#define V_MAC_SPEED_SEL(x)	    _SB_MAKEVALUE(x,S_MAC_SPEED_SEL)
+#define G_MAC_SPEED_SEL(x)	    _SB_GETVALUE(x,S_MAC_SPEED_SEL,M_MAC_SPEED_SEL)
+
+#define K_MAC_SPEED_SEL_10MBPS      0
+#define K_MAC_SPEED_SEL_100MBPS     1
+#define K_MAC_SPEED_SEL_1000MBPS    2
+#define K_MAC_SPEED_SEL_RESERVED    3
+
+#define V_MAC_SPEED_SEL_10MBPS      V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
+#define V_MAC_SPEED_SEL_100MBPS     V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
+#define V_MAC_SPEED_SEL_1000MBPS    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS)
+#define V_MAC_SPEED_SEL_RESERVED    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED)
+
+#define M_MAC_TX_CLK_EDGE_SEL       _SB_MAKEMASK1(36)
+#define M_MAC_LOOPBACK_SEL          _SB_MAKEMASK1(37)
+#define M_MAC_FAST_SYNC             _SB_MAKEMASK1(38)
+#define M_MAC_SS_EN                 _SB_MAKEMASK1(39)
+
+#define S_MAC_BYPASS_CFG	    _SB_MAKE64(40)
+#define M_MAC_BYPASS_CFG            _SB_MAKEMASK(2,S_MAC_BYPASS_CFG)
+#define V_MAC_BYPASS_CFG(x)         _SB_MAKEVALUE(x,S_MAC_BYPASS_CFG)
+#define G_MAC_BYPASS_CFG(x)         _SB_GETVALUE(x,S_MAC_BYPASS_CFG,M_MAC_BYPASS_CFG)
+
+#define K_MAC_BYPASS_GMII	    0
+#define K_MAC_BYPASS_ENCODED        1
+#define K_MAC_BYPASS_SOP            2
+#define K_MAC_BYPASS_EOP            3
+
+#define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
+#define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_RX_CH_SEL_MSB	    _SB_MAKEMASK1(44)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define S_MAC_BYPASS_IFG            _SB_MAKE64(46)
+#define M_MAC_BYPASS_IFG            _SB_MAKEMASK(8,S_MAC_BYPASS_IFG)
+#define V_MAC_BYPASS_IFG(x)	    _SB_MAKEVALUE(x,S_MAC_BYPASS_IFG)
+#define G_MAC_BYPASS_IFG(x)	    _SB_GETVALUE(x,S_MAC_BYPASS_IFG,M_MAC_BYPASS_IFG)
+
+#define K_MAC_FC_CMD_DISABLED       0
+#define K_MAC_FC_CMD_ENABLED        1
+#define K_MAC_FC_CMD_ENAB_FALSECARR 2
+
+#define V_MAC_FC_CMD_DISABLED       V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
+#define V_MAC_FC_CMD_ENABLED        V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
+#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR)
+
+#define M_MAC_FC_SEL                _SB_MAKEMASK1(54)
+
+#define S_MAC_FC_CMD                _SB_MAKE64(55)
+#define M_MAC_FC_CMD                _SB_MAKEMASK(2,S_MAC_FC_CMD)
+#define V_MAC_FC_CMD(x)	            _SB_MAKEVALUE(x,S_MAC_FC_CMD)
+#define G_MAC_FC_CMD(x)	            _SB_GETVALUE(x,S_MAC_FC_CMD,M_MAC_FC_CMD)
+
+#define S_MAC_RX_CH_SEL             _SB_MAKE64(57)
+#define M_MAC_RX_CH_SEL             _SB_MAKEMASK(7,S_MAC_RX_CH_SEL)
+#define V_MAC_RX_CH_SEL(x)          _SB_MAKEVALUE(x,S_MAC_RX_CH_SEL)
+#define G_MAC_RX_CH_SEL(x)          _SB_GETVALUE(x,S_MAC_RX_CH_SEL,M_MAC_RX_CH_SEL)
+
+
+/*
+ * MAC Enable Registers
+ * Register: MAC_ENABLE_0
+ * Register: MAC_ENABLE_1
+ * Register: MAC_ENABLE_2
+ */
+
+#define M_MAC_RXDMA_EN0	            _SB_MAKEMASK1(0)
+#define M_MAC_RXDMA_EN1	            _SB_MAKEMASK1(1)
+#define M_MAC_TXDMA_EN0	            _SB_MAKEMASK1(4)
+#define M_MAC_TXDMA_EN1	            _SB_MAKEMASK1(5)
+
+#define M_MAC_PORT_RESET            _SB_MAKEMASK1(8)
+
+#define M_MAC_RX_ENABLE             _SB_MAKEMASK1(10)
+#define M_MAC_TX_ENABLE             _SB_MAKEMASK1(11)
+#define M_MAC_BYP_RX_ENABLE         _SB_MAKEMASK1(12)
+#define M_MAC_BYP_TX_ENABLE         _SB_MAKEMASK1(13)
+
+/*
+ * MAC DMA Control Register
+ * Register: MAC_TXD_CTL_0
+ * Register: MAC_TXD_CTL_1
+ * Register: MAC_TXD_CTL_2
+ */
+
+#define S_MAC_TXD_WEIGHT0	    _SB_MAKE64(0)
+#define M_MAC_TXD_WEIGHT0	    _SB_MAKEMASK(4,S_MAC_TXD_WEIGHT0)
+#define V_MAC_TXD_WEIGHT0(x)        _SB_MAKEVALUE(x,S_MAC_TXD_WEIGHT0)
+#define G_MAC_TXD_WEIGHT0(x)        _SB_GETVALUE(x,S_MAC_TXD_WEIGHT0,M_MAC_TXD_WEIGHT0)
+
+#define S_MAC_TXD_WEIGHT1	    _SB_MAKE64(4)
+#define M_MAC_TXD_WEIGHT1	    _SB_MAKEMASK(4,S_MAC_TXD_WEIGHT1)
+#define V_MAC_TXD_WEIGHT1(x)        _SB_MAKEVALUE(x,S_MAC_TXD_WEIGHT1)
+#define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x,S_MAC_TXD_WEIGHT1,M_MAC_TXD_WEIGHT1)
+
+/*
+ * MAC Fifo Threshhold registers (Table 9-14)
+ * Register: MAC_THRSH_CFG_0
+ * Register: MAC_THRSH_CFG_1
+ * Register: MAC_THRSH_CFG_2
+ */
+
+#define S_MAC_TX_WR_THRSH           _SB_MAKE64(0)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6,S_MAC_TX_WR_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7,S_MAC_TX_WR_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_WR_THRSH)
+#define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_WR_THRSH,M_MAC_TX_WR_THRSH)
+
+#define S_MAC_TX_RD_THRSH           _SB_MAKE64(8)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6,S_MAC_TX_RD_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7,S_MAC_TX_RD_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_RD_THRSH)
+#define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_RD_THRSH,M_MAC_TX_RD_THRSH)
+
+#define S_MAC_TX_RL_THRSH           _SB_MAKE64(16)
+#define M_MAC_TX_RL_THRSH           _SB_MAKEMASK(4,S_MAC_TX_RL_THRSH)
+#define V_MAC_TX_RL_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_RL_THRSH)
+#define G_MAC_TX_RL_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_RL_THRSH,M_MAC_TX_RL_THRSH)
+
+#define S_MAC_RX_PL_THRSH           _SB_MAKE64(24)
+#define M_MAC_RX_PL_THRSH           _SB_MAKEMASK(6,S_MAC_RX_PL_THRSH)
+#define V_MAC_RX_PL_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_RX_PL_THRSH)
+#define G_MAC_RX_PL_THRSH(x)        _SB_GETVALUE(x,S_MAC_RX_PL_THRSH,M_MAC_RX_PL_THRSH)
+
+#define S_MAC_RX_RD_THRSH           _SB_MAKE64(32)
+#define M_MAC_RX_RD_THRSH           _SB_MAKEMASK(6,S_MAC_RX_RD_THRSH)
+#define V_MAC_RX_RD_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_RX_RD_THRSH)
+#define G_MAC_RX_RD_THRSH(x)        _SB_GETVALUE(x,S_MAC_RX_RD_THRSH,M_MAC_RX_RD_THRSH)
+
+#define S_MAC_RX_RL_THRSH           _SB_MAKE64(40)
+#define M_MAC_RX_RL_THRSH           _SB_MAKEMASK(6,S_MAC_RX_RL_THRSH)
+#define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_RX_RL_THRSH)
+#define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x,S_MAC_RX_RL_THRSH,M_MAC_RX_RL_THRSH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
+#define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6,S_MAC_ENC_FC_THRSH)
+#define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_ENC_FC_THRSH)
+#define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x,S_MAC_ENC_FC_THRSH,M_MAC_ENC_FC_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * MAC Frame Configuration Registers (Table 9-15)
+ * Register: MAC_FRAME_CFG_0
+ * Register: MAC_FRAME_CFG_1
+ * Register: MAC_FRAME_CFG_2
+ */
+
+/* XXXCGD: ??? Unused in pass2? */
+#define S_MAC_IFG_RX                _SB_MAKE64(0)
+#define M_MAC_IFG_RX                _SB_MAKEMASK(6,S_MAC_IFG_RX)
+#define V_MAC_IFG_RX(x)             _SB_MAKEVALUE(x,S_MAC_IFG_RX)
+#define G_MAC_IFG_RX(x)             _SB_GETVALUE(x,S_MAC_IFG_RX,M_MAC_IFG_RX)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_PRE_LEN               _SB_MAKE64(0)
+#define M_MAC_PRE_LEN               _SB_MAKEMASK(6,S_MAC_PRE_LEN)
+#define V_MAC_PRE_LEN(x)            _SB_MAKEVALUE(x,S_MAC_PRE_LEN)
+#define G_MAC_PRE_LEN(x)            _SB_GETVALUE(x,S_MAC_PRE_LEN,M_MAC_PRE_LEN)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define S_MAC_IFG_TX                _SB_MAKE64(6)
+#define M_MAC_IFG_TX                _SB_MAKEMASK(6,S_MAC_IFG_TX)
+#define V_MAC_IFG_TX(x)             _SB_MAKEVALUE(x,S_MAC_IFG_TX)
+#define G_MAC_IFG_TX(x)             _SB_GETVALUE(x,S_MAC_IFG_TX,M_MAC_IFG_TX)
+
+#define S_MAC_IFG_THRSH             _SB_MAKE64(12)
+#define M_MAC_IFG_THRSH             _SB_MAKEMASK(6,S_MAC_IFG_THRSH)
+#define V_MAC_IFG_THRSH(x)          _SB_MAKEVALUE(x,S_MAC_IFG_THRSH)
+#define G_MAC_IFG_THRSH(x)          _SB_GETVALUE(x,S_MAC_IFG_THRSH,M_MAC_IFG_THRSH)
+
+#define S_MAC_BACKOFF_SEL           _SB_MAKE64(18)
+#define M_MAC_BACKOFF_SEL           _SB_MAKEMASK(4,S_MAC_BACKOFF_SEL)
+#define V_MAC_BACKOFF_SEL(x)        _SB_MAKEVALUE(x,S_MAC_BACKOFF_SEL)
+#define G_MAC_BACKOFF_SEL(x)        _SB_GETVALUE(x,S_MAC_BACKOFF_SEL,M_MAC_BACKOFF_SEL)
+
+#define S_MAC_LFSR_SEED             _SB_MAKE64(22)
+#define M_MAC_LFSR_SEED             _SB_MAKEMASK(8,S_MAC_LFSR_SEED)
+#define V_MAC_LFSR_SEED(x)          _SB_MAKEVALUE(x,S_MAC_LFSR_SEED)
+#define G_MAC_LFSR_SEED(x)          _SB_GETVALUE(x,S_MAC_LFSR_SEED,M_MAC_LFSR_SEED)
+
+#define S_MAC_SLOT_SIZE             _SB_MAKE64(30)
+#define M_MAC_SLOT_SIZE             _SB_MAKEMASK(10,S_MAC_SLOT_SIZE)
+#define V_MAC_SLOT_SIZE(x)          _SB_MAKEVALUE(x,S_MAC_SLOT_SIZE)
+#define G_MAC_SLOT_SIZE(x)          _SB_GETVALUE(x,S_MAC_SLOT_SIZE,M_MAC_SLOT_SIZE)
+
+#define S_MAC_MIN_FRAMESZ           _SB_MAKE64(40)
+#define M_MAC_MIN_FRAMESZ           _SB_MAKEMASK(8,S_MAC_MIN_FRAMESZ)
+#define V_MAC_MIN_FRAMESZ(x)        _SB_MAKEVALUE(x,S_MAC_MIN_FRAMESZ)
+#define G_MAC_MIN_FRAMESZ(x)        _SB_GETVALUE(x,S_MAC_MIN_FRAMESZ,M_MAC_MIN_FRAMESZ)
+
+#define S_MAC_MAX_FRAMESZ           _SB_MAKE64(48)
+#define M_MAC_MAX_FRAMESZ           _SB_MAKEMASK(16,S_MAC_MAX_FRAMESZ)
+#define V_MAC_MAX_FRAMESZ(x)        _SB_MAKEVALUE(x,S_MAC_MAX_FRAMESZ)
+#define G_MAC_MAX_FRAMESZ(x)        _SB_GETVALUE(x,S_MAC_MAX_FRAMESZ,M_MAC_MAX_FRAMESZ)
+
+/*
+ * These constants are used to configure the fields within the Frame
+ * Configuration Register.  
+ */
+
+#define K_MAC_IFG_RX_10             _SB_MAKE64(0)	/* See table 176, not used */
+#define K_MAC_IFG_RX_100            _SB_MAKE64(0)
+#define K_MAC_IFG_RX_1000           _SB_MAKE64(0)
+
+#define K_MAC_IFG_TX_10             _SB_MAKE64(20)
+#define K_MAC_IFG_TX_100            _SB_MAKE64(20)
+#define K_MAC_IFG_TX_1000           _SB_MAKE64(8)
+
+#define K_MAC_IFG_THRSH_10          _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_100         _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_1000        _SB_MAKE64(0)
+
+#define K_MAC_SLOT_SIZE_10          _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_100         _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_1000        _SB_MAKE64(0)
+
+#define V_MAC_IFG_RX_10        V_MAC_IFG_RX(K_MAC_IFG_RX_10)
+#define V_MAC_IFG_RX_100       V_MAC_IFG_RX(K_MAC_IFG_RX_100)
+#define V_MAC_IFG_RX_1000      V_MAC_IFG_RX(K_MAC_IFG_RX_1000)
+
+#define V_MAC_IFG_TX_10        V_MAC_IFG_TX(K_MAC_IFG_TX_10)
+#define V_MAC_IFG_TX_100       V_MAC_IFG_TX(K_MAC_IFG_TX_100)
+#define V_MAC_IFG_TX_1000      V_MAC_IFG_TX(K_MAC_IFG_TX_1000)
+
+#define V_MAC_IFG_THRSH_10     V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10)
+#define V_MAC_IFG_THRSH_100    V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100)
+#define V_MAC_IFG_THRSH_1000   V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000)
+
+#define V_MAC_SLOT_SIZE_10     V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10)
+#define V_MAC_SLOT_SIZE_100    V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100)
+#define V_MAC_SLOT_SIZE_1000   V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000)
+
+#define K_MAC_MIN_FRAMESZ_FIFO      _SB_MAKE64(9)
+#define K_MAC_MIN_FRAMESZ_DEFAULT   _SB_MAKE64(64)
+#define K_MAC_MAX_FRAMESZ_DEFAULT   _SB_MAKE64(1518)
+#define K_MAC_MAX_FRAMESZ_JUMBO     _SB_MAKE64(9216)
+
+#define V_MAC_MIN_FRAMESZ_FIFO      V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
+#define V_MAC_MIN_FRAMESZ_DEFAULT   V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_DEFAULT   V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_JUMBO     V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
+
+/*
+ * MAC VLAN Tag Registers (Table 9-16)
+ * Register: MAC_VLANTAG_0
+ * Register: MAC_VLANTAG_1
+ * Register: MAC_VLANTAG_2
+ */
+
+#define S_MAC_VLAN_TAG           _SB_MAKE64(0)
+#define M_MAC_VLAN_TAG           _SB_MAKEMASK(32,S_MAC_VLAN_TAG)
+#define V_MAC_VLAN_TAG(x)        _SB_MAKEVALUE(x,S_MAC_VLAN_TAG)
+#define G_MAC_VLAN_TAG(x)        _SB_GETVALUE(x,S_MAC_VLAN_TAG,M_MAC_VLAN_TAG)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_TX_PKT_OFFSET      _SB_MAKE64(32)
+#define M_MAC_TX_PKT_OFFSET      _SB_MAKEMASK(8,S_MAC_TX_PKT_OFFSET)
+#define V_MAC_TX_PKT_OFFSET(x)   _SB_MAKEVALUE(x,S_MAC_TX_PKT_OFFSET)
+#define G_MAC_TX_PKT_OFFSET(x)   _SB_GETVALUE(x,S_MAC_TX_PKT_OFFSET,M_MAC_TX_PKT_OFFSET)
+
+#define S_MAC_TX_CRC_OFFSET      _SB_MAKE64(40)
+#define M_MAC_TX_CRC_OFFSET      _SB_MAKEMASK(8,S_MAC_TX_CRC_OFFSET)
+#define V_MAC_TX_CRC_OFFSET(x)   _SB_MAKEVALUE(x,S_MAC_TX_CRC_OFFSET)
+#define G_MAC_TX_CRC_OFFSET(x)   _SB_GETVALUE(x,S_MAC_TX_CRC_OFFSET,M_MAC_TX_CRC_OFFSET)
+
+#define M_MAC_CH_BASE_FC_EN      _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Status Registers (Table 9-17)
+ * Also used for the MAC Interrupt Mask Register (Table 9-18)
+ * Register: MAC_STATUS_0
+ * Register: MAC_STATUS_1
+ * Register: MAC_STATUS_2
+ * Register: MAC_INT_MASK_0
+ * Register: MAC_INT_MASK_1
+ * Register: MAC_INT_MASK_2
+ */
+
+/* 
+ * Use these constants to shift the appropriate channel
+ * into the CH0 position so the same tests can be used
+ * on each channel.
+ */
+
+#define S_MAC_RX_CH0                _SB_MAKE64(0)
+#define S_MAC_RX_CH1                _SB_MAKE64(8)
+#define S_MAC_TX_CH0                _SB_MAKE64(16)
+#define S_MAC_TX_CH1                _SB_MAKE64(24)
+
+#define S_MAC_TXCHANNELS	    _SB_MAKE64(16)	/* this is 1st TX chan */
+#define S_MAC_CHANWIDTH             _SB_MAKE64(8)	/* bits between channels */
+
+/*
+ *  These are the same as RX channel 0.  The idea here
+ *  is that you'll use one of the "S_" things above
+ *  and pass just the six bits to a DMA-channel-specific ISR
+ */
+#define M_MAC_INT_CHANNEL           _SB_MAKEMASK(8,0)
+#define M_MAC_INT_EOP_COUNT         _SB_MAKEMASK1(0)
+#define M_MAC_INT_EOP_TIMER         _SB_MAKEMASK1(1)
+#define M_MAC_INT_EOP_SEEN          _SB_MAKEMASK1(2)
+#define M_MAC_INT_HWM               _SB_MAKEMASK1(3)
+#define M_MAC_INT_LWM               _SB_MAKEMASK1(4)
+#define M_MAC_INT_DSCR              _SB_MAKEMASK1(5)
+#define M_MAC_INT_ERR               _SB_MAKEMASK1(6)
+#define M_MAC_INT_DZERO             _SB_MAKEMASK1(7)	/* only for TX channels */
+#define M_MAC_INT_DROP              _SB_MAKEMASK1(7)	/* only for RX channels */
+
+/*
+ * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see
+ * also DMA_TX/DMA_RX in sb_regs.h).
+ */
+#define S_MAC_STATUS_CH_OFFSET(ch,txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH)
+
+#define M_MAC_STATUS_CHANNEL(ch,txrx)   _SB_MAKEVALUE(_SB_MAKEMASK(8,0),S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_EOP_COUNT(ch,txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_EOP_TIMER(ch,txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_EOP_SEEN(ch,txrx)  _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_HWM(ch,txrx)       _SB_MAKEVALUE(M_MAC_INT_HWM,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_LWM(ch,txrx)       _SB_MAKEVALUE(M_MAC_INT_LWM,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_DSCR(ch,txrx)      _SB_MAKEVALUE(M_MAC_INT_DSCR,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_ERR(ch,txrx)       _SB_MAKEVALUE(M_MAC_INT_ERR,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_DZERO(ch,txrx)     _SB_MAKEVALUE(M_MAC_INT_DZERO,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_DROP(ch,txrx)      _SB_MAKEVALUE(M_MAC_INT_DROP,S_MAC_STATUS_CH_OFFSET(ch,txrx))
+#define M_MAC_STATUS_OTHER_ERR          _SB_MAKEVALUE(_SB_MAKEMASK(7,0),40)
+
+
+#define M_MAC_RX_UNDRFL             _SB_MAKEMASK1(40)
+#define M_MAC_RX_OVRFL              _SB_MAKEMASK1(41)
+#define M_MAC_TX_UNDRFL             _SB_MAKEMASK1(42)
+#define M_MAC_TX_OVRFL              _SB_MAKEMASK1(43)
+#define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
+#define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
+#define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
+#define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5,S_MAC_COUNTER_ADDR)
+#define V_MAC_COUNTER_ADDR(x)       _SB_MAKEVALUE(x,S_MAC_COUNTER_ADDR)
+#define G_MAC_COUNTER_ADDR(x)       _SB_GETVALUE(x,S_MAC_COUNTER_ADDR,M_MAC_COUNTER_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_TX_PAUSE_ON	    _SB_MAKEMASK1(52)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Fifo Pointer Registers (Table 9-19)    [Debug register]
+ * Register: MAC_FIFO_PTRS_0
+ * Register: MAC_FIFO_PTRS_1
+ * Register: MAC_FIFO_PTRS_2
+ */
+
+#define S_MAC_TX_WRPTR              _SB_MAKE64(0)
+#define M_MAC_TX_WRPTR              _SB_MAKEMASK(6,S_MAC_TX_WRPTR)
+#define V_MAC_TX_WRPTR(x)           _SB_MAKEVALUE(x,S_MAC_TX_WRPTR)
+#define G_MAC_TX_WRPTR(x)           _SB_GETVALUE(x,S_MAC_TX_WRPTR,M_MAC_TX_WRPTR)
+
+#define S_MAC_TX_RDPTR              _SB_MAKE64(8)
+#define M_MAC_TX_RDPTR              _SB_MAKEMASK(6,S_MAC_TX_RDPTR)
+#define V_MAC_TX_RDPTR(x)           _SB_MAKEVALUE(x,S_MAC_TX_RDPTR)
+#define G_MAC_TX_RDPTR(x)           _SB_GETVALUE(x,S_MAC_TX_RDPTR,M_MAC_TX_RDPTR)
+
+#define S_MAC_RX_WRPTR              _SB_MAKE64(16)
+#define M_MAC_RX_WRPTR              _SB_MAKEMASK(6,S_MAC_RX_WRPTR)
+#define V_MAC_RX_WRPTR(x)           _SB_MAKEVALUE(x,S_MAC_RX_WRPTR)
+#define G_MAC_RX_WRPTR(x)           _SB_GETVALUE(x,S_MAC_RX_WRPTR,M_MAC_TX_WRPTR)
+
+#define S_MAC_RX_RDPTR              _SB_MAKE64(24)
+#define M_MAC_RX_RDPTR              _SB_MAKEMASK(6,S_MAC_RX_RDPTR)
+#define V_MAC_RX_RDPTR(x)           _SB_MAKEVALUE(x,S_MAC_RX_RDPTR)
+#define G_MAC_RX_RDPTR(x)           _SB_GETVALUE(x,S_MAC_RX_RDPTR,M_MAC_TX_RDPTR)
+
+/*
+ * MAC Fifo End Of Packet Count Registers (Table 9-20)  [Debug register]
+ * Register: MAC_EOPCNT_0
+ * Register: MAC_EOPCNT_1
+ * Register: MAC_EOPCNT_2
+ */
+
+#define S_MAC_TX_EOP_COUNTER        _SB_MAKE64(0)
+#define M_MAC_TX_EOP_COUNTER        _SB_MAKEMASK(6,S_MAC_TX_EOP_COUNTER)
+#define V_MAC_TX_EOP_COUNTER(x)     _SB_MAKEVALUE(x,S_MAC_TX_EOP_COUNTER)
+#define G_MAC_TX_EOP_COUNTER(x)     _SB_GETVALUE(x,S_MAC_TX_EOP_COUNTER,M_MAC_TX_EOP_COUNTER)
+
+#define S_MAC_RX_EOP_COUNTER        _SB_MAKE64(8)
+#define M_MAC_RX_EOP_COUNTER        _SB_MAKEMASK(6,S_MAC_RX_EOP_COUNTER)
+#define V_MAC_RX_EOP_COUNTER(x)     _SB_MAKEVALUE(x,S_MAC_RX_EOP_COUNTER)
+#define G_MAC_RX_EOP_COUNTER(x)     _SB_GETVALUE(x,S_MAC_RX_EOP_COUNTER,M_MAC_RX_EOP_COUNTER)
+
+/*
+ * MAC Recieve Address Filter Exact Match Registers (Table 9-21)
+ * Registers: MAC_ADDR0_0 through MAC_ADDR7_0
+ * Registers: MAC_ADDR0_1 through MAC_ADDR7_1
+ * Registers: MAC_ADDR0_2 through MAC_ADDR7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Receive Address Filter Mask Registers
+ * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1
+ * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1
+ * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Recieve Address Filter Hash Match Registers (Table 9-22)
+ * Registers: MAC_HASH0_0 through MAC_HASH7_0
+ * Registers: MAC_HASH0_1 through MAC_HASH7_1
+ * Registers: MAC_HASH0_2 through MAC_HASH7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Transmit Source Address Registers (Table 9-23)
+ * Register: MAC_ETHERNET_ADDR_0
+ * Register: MAC_ETHERNET_ADDR_1
+ * Register: MAC_ETHERNET_ADDR_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Packet Type Configuration Register
+ * Register: MAC_TYPE_CFG_0
+ * Register: MAC_TYPE_CFG_1
+ * Register: MAC_TYPE_CFG_2
+ */
+
+#define S_TYPECFG_TYPESIZE      _SB_MAKE64(16)
+
+#define S_TYPECFG_TYPE0		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE0         _SB_MAKEMASK(16,S_TYPECFG_TYPE0)
+#define V_TYPECFG_TYPE0(x)      _SB_MAKEVALUE(x,S_TYPECFG_TYPE0)
+#define G_TYPECFG_TYPE0(x)      _SB_GETVALUE(x,S_TYPECFG_TYPE0,M_TYPECFG_TYPE0)
+
+#define S_TYPECFG_TYPE1		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE1         _SB_MAKEMASK(16,S_TYPECFG_TYPE1)
+#define V_TYPECFG_TYPE1(x)      _SB_MAKEVALUE(x,S_TYPECFG_TYPE1)
+#define G_TYPECFG_TYPE1(x)      _SB_GETVALUE(x,S_TYPECFG_TYPE1,M_TYPECFG_TYPE1)
+
+#define S_TYPECFG_TYPE2		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE2         _SB_MAKEMASK(16,S_TYPECFG_TYPE2)
+#define V_TYPECFG_TYPE2(x)      _SB_MAKEVALUE(x,S_TYPECFG_TYPE2)
+#define G_TYPECFG_TYPE2(x)      _SB_GETVALUE(x,S_TYPECFG_TYPE2,M_TYPECFG_TYPE2)
+
+#define S_TYPECFG_TYPE3		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE3         _SB_MAKEMASK(16,S_TYPECFG_TYPE3)
+#define V_TYPECFG_TYPE3(x)      _SB_MAKEVALUE(x,S_TYPECFG_TYPE3)
+#define G_TYPECFG_TYPE3(x)      _SB_GETVALUE(x,S_TYPECFG_TYPE3,M_TYPECFG_TYPE3)
+
+/*
+ * MAC Receive Address Filter Control Registers (Table 9-24)
+ * Register: MAC_ADFILTER_CFG_0
+ * Register: MAC_ADFILTER_CFG_1
+ * Register: MAC_ADFILTER_CFG_2
+ */
+
+#define M_MAC_ALLPKT_EN	        _SB_MAKEMASK1(0)
+#define M_MAC_UCAST_EN          _SB_MAKEMASK1(1)
+#define M_MAC_UCAST_INV         _SB_MAKEMASK1(2)
+#define M_MAC_MCAST_EN          _SB_MAKEMASK1(3)
+#define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
+#define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
+#define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
+#define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8,S_MAC_IPHDR_OFFSET)
+#define V_MAC_IPHDR_OFFSET(x)	_SB_MAKEVALUE(x,S_MAC_IPHDR_OFFSET)
+#define G_MAC_IPHDR_OFFSET(x)	_SB_GETVALUE(x,S_MAC_IPHDR_OFFSET,M_MAC_IPHDR_OFFSET)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_RX_CRC_OFFSET     _SB_MAKE64(16)
+#define M_MAC_RX_CRC_OFFSET     _SB_MAKEMASK(8,S_MAC_RX_CRC_OFFSET)
+#define V_MAC_RX_CRC_OFFSET(x)	_SB_MAKEVALUE(x,S_MAC_RX_CRC_OFFSET)
+#define G_MAC_RX_CRC_OFFSET(x)	_SB_GETVALUE(x,S_MAC_RX_CRC_OFFSET,M_MAC_RX_CRC_OFFSET)
+
+#define S_MAC_RX_PKT_OFFSET     _SB_MAKE64(24)
+#define M_MAC_RX_PKT_OFFSET     _SB_MAKEMASK(8,S_MAC_RX_PKT_OFFSET)
+#define V_MAC_RX_PKT_OFFSET(x)	_SB_MAKEVALUE(x,S_MAC_RX_PKT_OFFSET)
+#define G_MAC_RX_PKT_OFFSET(x)	_SB_GETVALUE(x,S_MAC_RX_PKT_OFFSET,M_MAC_RX_PKT_OFFSET)
+
+#define M_MAC_FWDPAUSE_EN	_SB_MAKEMASK1(32)
+#define M_MAC_VLAN_DET_EN	_SB_MAKEMASK1(33)
+
+#define S_MAC_RX_CH_MSN_SEL     _SB_MAKE64(34)
+#define M_MAC_RX_CH_MSN_SEL     _SB_MAKEMASK(8,S_MAC_RX_CH_MSN_SEL)
+#define V_MAC_RX_CH_MSN_SEL(x)	_SB_MAKEVALUE(x,S_MAC_RX_CH_MSN_SEL)
+#define G_MAC_RX_CH_MSN_SEL(x)	_SB_GETVALUE(x,S_MAC_RX_CH_MSN_SEL,M_MAC_RX_CH_MSN_SEL)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Receive Channel Select Registers (Table 9-25)
+ */
+
+/* no bitfields */
+
+/*
+ * MAC MII Management Interface Registers (Table 9-26)
+ * Register: MAC_MDIO_0
+ * Register: MAC_MDIO_1
+ * Register: MAC_MDIO_2
+ */
+
+#define S_MAC_MDC		0
+#define S_MAC_MDIO_DIR		1
+#define S_MAC_MDIO_OUT		2
+#define S_MAC_GENC		3
+#define S_MAC_MDIO_IN		4
+
+#define M_MAC_MDC		_SB_MAKEMASK1(S_MAC_MDC)
+#define M_MAC_MDIO_DIR		_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_DIR_INPUT	_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_OUT		_SB_MAKEMASK1(S_MAC_MDIO_OUT)
+#define M_MAC_GENC		_SB_MAKEMASK1(S_MAC_GENC)
+#define M_MAC_MDIO_IN		_SB_MAKEMASK1(S_MAC_MDIO_IN)
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h
new file mode 100644
index 000000000000..93a48334b874
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_mc.h
@@ -0,0 +1,548 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Memory Controller constants              File: sb1250_mc.h       
+    *  
+    *  This module contains constants and macros useful for
+    *  programming the memory controller.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MC_H
+#define _SB1250_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Config Register (table 6-14)
+ */
+
+#define S_MC_RESERVED0              0
+#define M_MC_RESERVED0              _SB_MAKEMASK(8,S_MC_RESERVED0)
+
+#define S_MC_CHANNEL_SEL            8
+#define M_MC_CHANNEL_SEL            _SB_MAKEMASK(8,S_MC_CHANNEL_SEL)
+#define V_MC_CHANNEL_SEL(x)         _SB_MAKEVALUE(x,S_MC_CHANNEL_SEL)
+#define G_MC_CHANNEL_SEL(x)         _SB_GETVALUE(x,S_MC_CHANNEL_SEL,M_MC_CHANNEL_SEL)
+
+#define S_MC_BANK0_MAP              16
+#define M_MC_BANK0_MAP              _SB_MAKEMASK(4,S_MC_BANK0_MAP)
+#define V_MC_BANK0_MAP(x)           _SB_MAKEVALUE(x,S_MC_BANK0_MAP)
+#define G_MC_BANK0_MAP(x)           _SB_GETVALUE(x,S_MC_BANK0_MAP,M_MC_BANK0_MAP)
+
+#define K_MC_BANK0_MAP_DEFAULT      0x00
+#define V_MC_BANK0_MAP_DEFAULT      V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
+
+#define S_MC_BANK1_MAP              20
+#define M_MC_BANK1_MAP              _SB_MAKEMASK(4,S_MC_BANK1_MAP)
+#define V_MC_BANK1_MAP(x)           _SB_MAKEVALUE(x,S_MC_BANK1_MAP)
+#define G_MC_BANK1_MAP(x)           _SB_GETVALUE(x,S_MC_BANK1_MAP,M_MC_BANK1_MAP)
+
+#define K_MC_BANK1_MAP_DEFAULT      0x08
+#define V_MC_BANK1_MAP_DEFAULT      V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
+
+#define S_MC_BANK2_MAP              24
+#define M_MC_BANK2_MAP              _SB_MAKEMASK(4,S_MC_BANK2_MAP)
+#define V_MC_BANK2_MAP(x)           _SB_MAKEVALUE(x,S_MC_BANK2_MAP)
+#define G_MC_BANK2_MAP(x)           _SB_GETVALUE(x,S_MC_BANK2_MAP,M_MC_BANK2_MAP)
+
+#define K_MC_BANK2_MAP_DEFAULT      0x09
+#define V_MC_BANK2_MAP_DEFAULT      V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
+
+#define S_MC_BANK3_MAP              28
+#define M_MC_BANK3_MAP              _SB_MAKEMASK(4,S_MC_BANK3_MAP)
+#define V_MC_BANK3_MAP(x)           _SB_MAKEVALUE(x,S_MC_BANK3_MAP)
+#define G_MC_BANK3_MAP(x)           _SB_GETVALUE(x,S_MC_BANK3_MAP,M_MC_BANK3_MAP)
+
+#define K_MC_BANK3_MAP_DEFAULT      0x0C
+#define V_MC_BANK3_MAP_DEFAULT      V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
+
+#define M_MC_RESERVED1              _SB_MAKEMASK(8,32)
+
+#define S_MC_QUEUE_SIZE		    40
+#define M_MC_QUEUE_SIZE             _SB_MAKEMASK(4,S_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE(x)          _SB_MAKEVALUE(x,S_MC_QUEUE_SIZE)
+#define G_MC_QUEUE_SIZE(x)          _SB_GETVALUE(x,S_MC_QUEUE_SIZE,M_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE_DEFAULT     V_MC_QUEUE_SIZE(0x0A)
+
+#define S_MC_AGE_LIMIT              44
+#define M_MC_AGE_LIMIT              _SB_MAKEMASK(4,S_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT(x)           _SB_MAKEVALUE(x,S_MC_AGE_LIMIT)
+#define G_MC_AGE_LIMIT(x)           _SB_GETVALUE(x,S_MC_AGE_LIMIT,M_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT_DEFAULT      V_MC_AGE_LIMIT(8)
+
+#define S_MC_WR_LIMIT               48
+#define M_MC_WR_LIMIT               _SB_MAKEMASK(4,S_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT(x)            _SB_MAKEVALUE(x,S_MC_WR_LIMIT)
+#define G_MC_WR_LIMIT(x)            _SB_GETVALUE(x,S_MC_WR_LIMIT,M_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT_DEFAULT       V_MC_WR_LIMIT(5)
+
+#define M_MC_IOB1HIGHPRIORITY	    _SB_MAKEMASK1(52)
+
+#define M_MC_RESERVED2              _SB_MAKEMASK(3,53)
+
+#define S_MC_CS_MODE                56
+#define M_MC_CS_MODE                _SB_MAKEMASK(4,S_MC_CS_MODE)
+#define V_MC_CS_MODE(x)             _SB_MAKEVALUE(x,S_MC_CS_MODE)
+#define G_MC_CS_MODE(x)             _SB_GETVALUE(x,S_MC_CS_MODE,M_MC_CS_MODE)
+
+#define K_MC_CS_MODE_MSB_CS         0
+#define K_MC_CS_MODE_INTLV_CS       15
+#define K_MC_CS_MODE_MIXED_CS_10    12
+#define K_MC_CS_MODE_MIXED_CS_30    6
+#define K_MC_CS_MODE_MIXED_CS_32    3
+
+#define V_MC_CS_MODE_MSB_CS         V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
+#define V_MC_CS_MODE_INTLV_CS       V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
+#define V_MC_CS_MODE_MIXED_CS_10    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10)
+#define V_MC_CS_MODE_MIXED_CS_30    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30)
+#define V_MC_CS_MODE_MIXED_CS_32    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32)
+
+#define M_MC_ECC_DISABLE            _SB_MAKEMASK1(60)
+#define M_MC_BERR_DISABLE           _SB_MAKEMASK1(61)
+#define M_MC_FORCE_SEQ              _SB_MAKEMASK1(62)
+#define M_MC_DEBUG                  _SB_MAKEMASK1(63)
+
+#define V_MC_CONFIG_DEFAULT     V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
+				V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \
+				V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \
+                                M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
+
+
+/*
+ * Memory clock config register (Table 6-15)
+ *
+ * Note: this field has been updated to be consistent with the errata to 0.2
+ */
+
+#define S_MC_CLK_RATIO              0
+#define M_MC_CLK_RATIO              _SB_MAKEMASK(4,S_MC_CLK_RATIO)
+#define V_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x,S_MC_CLK_RATIO)
+#define G_MC_CLK_RATIO(x)           _SB_GETVALUE(x,S_MC_CLK_RATIO,M_MC_CLK_RATIO)
+
+#define K_MC_CLK_RATIO_2X           4
+#define K_MC_CLK_RATIO_25X          5
+#define K_MC_CLK_RATIO_3X           6
+#define K_MC_CLK_RATIO_35X          7
+#define K_MC_CLK_RATIO_4X           8
+#define K_MC_CLK_RATIO_45X	    9
+
+#define V_MC_CLK_RATIO_2X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X)
+#define V_MC_CLK_RATIO_25X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
+#define V_MC_CLK_RATIO_3X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
+#define V_MC_CLK_RATIO_35X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
+#define V_MC_CLK_RATIO_4X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
+#define V_MC_CLK_RATIO_45X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
+#define V_MC_CLK_RATIO_DEFAULT      V_MC_CLK_RATIO_25X
+
+#define S_MC_REF_RATE                8
+#define M_MC_REF_RATE                _SB_MAKEMASK(8,S_MC_REF_RATE)
+#define V_MC_REF_RATE(x)             _SB_MAKEVALUE(x,S_MC_REF_RATE)
+#define G_MC_REF_RATE(x)             _SB_GETVALUE(x,S_MC_REF_RATE,M_MC_REF_RATE)
+
+#define K_MC_REF_RATE_100MHz         0x62
+#define K_MC_REF_RATE_133MHz         0x81
+#define K_MC_REF_RATE_200MHz         0xC4 
+
+#define V_MC_REF_RATE_100MHz         V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
+#define V_MC_REF_RATE_133MHz         V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
+#define V_MC_REF_RATE_200MHz         V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
+#define V_MC_REF_RATE_DEFAULT        V_MC_REF_RATE_100MHz
+
+#define S_MC_CLOCK_DRIVE             16
+#define M_MC_CLOCK_DRIVE             _SB_MAKEMASK(4,S_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE(x)          _SB_MAKEVALUE(x,S_MC_CLOCK_DRIVE)
+#define G_MC_CLOCK_DRIVE(x)          _SB_GETVALUE(x,S_MC_CLOCK_DRIVE,M_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE_DEFAULT     V_MC_CLOCK_DRIVE(0xF)
+
+#define S_MC_DATA_DRIVE              20
+#define M_MC_DATA_DRIVE              _SB_MAKEMASK(4,S_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE(x)           _SB_MAKEVALUE(x,S_MC_DATA_DRIVE)
+#define G_MC_DATA_DRIVE(x)           _SB_GETVALUE(x,S_MC_DATA_DRIVE,M_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE_DEFAULT      V_MC_DATA_DRIVE(0x0)
+
+#define S_MC_ADDR_DRIVE              24
+#define M_MC_ADDR_DRIVE              _SB_MAKEMASK(4,S_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE(x)           _SB_MAKEVALUE(x,S_MC_ADDR_DRIVE)
+#define G_MC_ADDR_DRIVE(x)           _SB_GETVALUE(x,S_MC_ADDR_DRIVE,M_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE_DEFAULT      V_MC_ADDR_DRIVE(0x0)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_REF_DISABLE             _SB_MAKEMASK1(30)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_MC_DLL_BYPASS              _SB_MAKEMASK1(31)
+
+#define S_MC_DQI_SKEW               32
+#define M_MC_DQI_SKEW               _SB_MAKEMASK(8,S_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW(x)            _SB_MAKEVALUE(x,S_MC_DQI_SKEW)
+#define G_MC_DQI_SKEW(x)            _SB_GETVALUE(x,S_MC_DQI_SKEW,M_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW_DEFAULT       V_MC_DQI_SKEW(0)
+
+#define S_MC_DQO_SKEW               40
+#define M_MC_DQO_SKEW               _SB_MAKEMASK(8,S_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW(x)            _SB_MAKEVALUE(x,S_MC_DQO_SKEW)
+#define G_MC_DQO_SKEW(x)            _SB_GETVALUE(x,S_MC_DQO_SKEW,M_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW_DEFAULT       V_MC_DQO_SKEW(0)
+
+#define S_MC_ADDR_SKEW               48
+#define M_MC_ADDR_SKEW               _SB_MAKEMASK(8,S_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW(x)            _SB_MAKEVALUE(x,S_MC_ADDR_SKEW)
+#define G_MC_ADDR_SKEW(x)            _SB_GETVALUE(x,S_MC_ADDR_SKEW,M_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW_DEFAULT       V_MC_ADDR_SKEW(0x0F)
+
+#define S_MC_DLL_DEFAULT             56
+#define M_MC_DLL_DEFAULT             _SB_MAKEMASK(8,S_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT(x)          _SB_MAKEVALUE(x,S_MC_DLL_DEFAULT)
+#define G_MC_DLL_DEFAULT(x)          _SB_GETVALUE(x,S_MC_DLL_DEFAULT,M_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT_DEFAULT     V_MC_DLL_DEFAULT(0x10)
+
+#define V_MC_CLKCONFIG_DEFAULT       V_MC_DLL_DEFAULT_DEFAULT |  \
+                                     V_MC_ADDR_SKEW_DEFAULT | \
+                                     V_MC_DQO_SKEW_DEFAULT | \
+                                     V_MC_DQI_SKEW_DEFAULT | \
+                                     V_MC_ADDR_DRIVE_DEFAULT | \
+                                     V_MC_DATA_DRIVE_DEFAULT | \
+                                     V_MC_CLOCK_DRIVE_DEFAULT | \
+                                     V_MC_REF_RATE_DEFAULT 
+
+
+
+/*
+ * DRAM Command Register (Table 6-13)
+ */
+
+#define S_MC_COMMAND                0
+#define M_MC_COMMAND                _SB_MAKEMASK(4,S_MC_COMMAND)
+#define V_MC_COMMAND(x)             _SB_MAKEVALUE(x,S_MC_COMMAND)
+#define G_MC_COMMAND(x)             _SB_GETVALUE(x,S_MC_COMMAND,M_MC_COMMAND)
+
+#define K_MC_COMMAND_EMRS           0
+#define K_MC_COMMAND_MRS            1
+#define K_MC_COMMAND_PRE            2
+#define K_MC_COMMAND_AR             3
+#define K_MC_COMMAND_SETRFSH        4
+#define K_MC_COMMAND_CLRRFSH        5
+#define K_MC_COMMAND_SETPWRDN       6
+#define K_MC_COMMAND_CLRPWRDN       7
+
+#define V_MC_COMMAND_EMRS           V_MC_COMMAND(K_MC_COMMAND_EMRS)
+#define V_MC_COMMAND_MRS            V_MC_COMMAND(K_MC_COMMAND_MRS)
+#define V_MC_COMMAND_PRE            V_MC_COMMAND(K_MC_COMMAND_PRE)
+#define V_MC_COMMAND_AR             V_MC_COMMAND(K_MC_COMMAND_AR)
+#define V_MC_COMMAND_SETRFSH        V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
+#define V_MC_COMMAND_CLRRFSH        V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
+#define V_MC_COMMAND_SETPWRDN       V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
+#define V_MC_COMMAND_CLRPWRDN       V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
+
+#define M_MC_CS0                    _SB_MAKEMASK1(4)
+#define M_MC_CS1                    _SB_MAKEMASK1(5)
+#define M_MC_CS2                    _SB_MAKEMASK1(6)
+#define M_MC_CS3                    _SB_MAKEMASK1(7)
+
+/*
+ * DRAM Mode Register (Table 6-14)
+ */
+
+#define S_MC_EMODE                  0
+#define M_MC_EMODE                  _SB_MAKEMASK(15,S_MC_EMODE)
+#define V_MC_EMODE(x)               _SB_MAKEVALUE(x,S_MC_EMODE)
+#define G_MC_EMODE(x)               _SB_GETVALUE(x,S_MC_EMODE,M_MC_EMODE)
+#define V_MC_EMODE_DEFAULT          V_MC_EMODE(0)
+
+#define S_MC_MODE                   16
+#define M_MC_MODE                   _SB_MAKEMASK(15,S_MC_MODE)
+#define V_MC_MODE(x)                _SB_MAKEVALUE(x,S_MC_MODE)
+#define G_MC_MODE(x)                _SB_GETVALUE(x,S_MC_MODE,M_MC_MODE)
+#define V_MC_MODE_DEFAULT           V_MC_MODE(0x22)
+
+#define S_MC_DRAM_TYPE              32
+#define M_MC_DRAM_TYPE              _SB_MAKEMASK(3,S_MC_DRAM_TYPE)
+#define V_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x,S_MC_DRAM_TYPE)
+#define G_MC_DRAM_TYPE(x)           _SB_GETVALUE(x,S_MC_DRAM_TYPE,M_MC_DRAM_TYPE)
+
+#define K_MC_DRAM_TYPE_JEDEC        0
+#define K_MC_DRAM_TYPE_FCRAM        1
+#define K_MC_DRAM_TYPE_SGRAM	    2
+
+#define V_MC_DRAM_TYPE_JEDEC        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
+#define V_MC_DRAM_TYPE_FCRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
+#define V_MC_DRAM_TYPE_SGRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
+
+#define M_MC_EXTERNALDECODE	    _SB_MAKEMASK1(35)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(38)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+
+/*
+ * SDRAM Timing Register  (Table 6-15)
+ */
+
+#define M_MC_w2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(60)
+#define M_MC_r2wIDLE_TWOCYCLES	  _SB_MAKEMASK1(61)
+#define M_MC_r2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(62)
+
+#define S_MC_tFIFO                56
+#define M_MC_tFIFO                _SB_MAKEMASK(4,S_MC_tFIFO)
+#define V_MC_tFIFO(x)             _SB_MAKEVALUE(x,S_MC_tFIFO)
+#define G_MC_tFIFO(x)             _SB_GETVALUE(x,S_MC_tFIFO,M_MC_tFIFO)
+#define K_MC_tFIFO_DEFAULT        1
+#define V_MC_tFIFO_DEFAULT        V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
+
+#define S_MC_tRFC                 52
+#define M_MC_tRFC                 _SB_MAKEMASK(4,S_MC_tRFC)
+#define V_MC_tRFC(x)              _SB_MAKEVALUE(x,S_MC_tRFC)
+#define G_MC_tRFC(x)              _SB_GETVALUE(x,S_MC_tRFC,M_MC_tRFC)
+#define K_MC_tRFC_DEFAULT         12
+#define V_MC_tRFC_DEFAULT         V_MC_tRFC(K_MC_tRFC_DEFAULT)
+
+#define S_MC_tCwCr                40
+#define M_MC_tCwCr                _SB_MAKEMASK(4,S_MC_tCwCr)
+#define V_MC_tCwCr(x)             _SB_MAKEVALUE(x,S_MC_tCwCr)
+#define G_MC_tCwCr(x)             _SB_GETVALUE(x,S_MC_tCwCr,M_MC_tCwCr)
+#define K_MC_tCwCr_DEFAULT        4
+#define V_MC_tCwCr_DEFAULT        V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
+
+#define S_MC_tRCr                 28
+#define M_MC_tRCr                 _SB_MAKEMASK(4,S_MC_tRCr)
+#define V_MC_tRCr(x)              _SB_MAKEVALUE(x,S_MC_tRCr)
+#define G_MC_tRCr(x)              _SB_GETVALUE(x,S_MC_tRCr,M_MC_tRCr)
+#define K_MC_tRCr_DEFAULT         9
+#define V_MC_tRCr_DEFAULT         V_MC_tRCr(K_MC_tRCr_DEFAULT)
+
+#define S_MC_tRCw                 24
+#define M_MC_tRCw                 _SB_MAKEMASK(4,S_MC_tRCw)
+#define V_MC_tRCw(x)              _SB_MAKEVALUE(x,S_MC_tRCw)
+#define G_MC_tRCw(x)              _SB_GETVALUE(x,S_MC_tRCw,M_MC_tRCw)
+#define K_MC_tRCw_DEFAULT         10
+#define V_MC_tRCw_DEFAULT         V_MC_tRCw(K_MC_tRCw_DEFAULT)
+
+#define S_MC_tRRD                 20
+#define M_MC_tRRD                 _SB_MAKEMASK(4,S_MC_tRRD)
+#define V_MC_tRRD(x)              _SB_MAKEVALUE(x,S_MC_tRRD)
+#define G_MC_tRRD(x)              _SB_GETVALUE(x,S_MC_tRRD,M_MC_tRRD)
+#define K_MC_tRRD_DEFAULT         2
+#define V_MC_tRRD_DEFAULT         V_MC_tRRD(K_MC_tRRD_DEFAULT)
+
+#define S_MC_tRP                  16
+#define M_MC_tRP                  _SB_MAKEMASK(4,S_MC_tRP)
+#define V_MC_tRP(x)               _SB_MAKEVALUE(x,S_MC_tRP)
+#define G_MC_tRP(x)               _SB_GETVALUE(x,S_MC_tRP,M_MC_tRP)
+#define K_MC_tRP_DEFAULT          4
+#define V_MC_tRP_DEFAULT          V_MC_tRP(K_MC_tRP_DEFAULT)
+
+#define S_MC_tCwD                 8
+#define M_MC_tCwD                 _SB_MAKEMASK(4,S_MC_tCwD)
+#define V_MC_tCwD(x)              _SB_MAKEVALUE(x,S_MC_tCwD)
+#define G_MC_tCwD(x)              _SB_GETVALUE(x,S_MC_tCwD,M_MC_tCwD)
+#define K_MC_tCwD_DEFAULT         1
+#define V_MC_tCwD_DEFAULT         V_MC_tCwD(K_MC_tCwD_DEFAULT)
+
+#define M_tCrDh                   _SB_MAKEMASK1(7)
+#define M_MC_tCrDh		  M_tCrDh
+
+#define S_MC_tCrD                 4
+#define M_MC_tCrD                 _SB_MAKEMASK(3,S_MC_tCrD)
+#define V_MC_tCrD(x)              _SB_MAKEVALUE(x,S_MC_tCrD)
+#define G_MC_tCrD(x)              _SB_GETVALUE(x,S_MC_tCrD,M_MC_tCrD)
+#define K_MC_tCrD_DEFAULT         2
+#define V_MC_tCrD_DEFAULT         V_MC_tCrD(K_MC_tCrD_DEFAULT)
+
+#define S_MC_tRCD                 0
+#define M_MC_tRCD                 _SB_MAKEMASK(4,S_MC_tRCD)
+#define V_MC_tRCD(x)              _SB_MAKEVALUE(x,S_MC_tRCD)
+#define G_MC_tRCD(x)              _SB_GETVALUE(x,S_MC_tRCD,M_MC_tRCD)
+#define K_MC_tRCD_DEFAULT         3
+#define V_MC_tRCD_DEFAULT         V_MC_tRCD(K_MC_tRCD_DEFAULT)
+
+#define V_MC_TIMING_DEFAULT     V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
+                                V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
+                                V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
+                                V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
+                                V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
+                                V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
+                                V_MC_tRP(K_MC_tRP_DEFAULT) | \
+                                V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
+                                V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
+                                V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
+                                M_MC_r2rIDLE_TWOCYCLES
+
+/*
+ * Errata says these are not the default
+ *                               M_MC_w2rIDLE_TWOCYCLES | \
+ *                               M_MC_r2wIDLE_TWOCYCLES | \
+ */
+
+
+/*
+ * Chip Select Start Address Register (Table 6-17)
+ */
+
+#define S_MC_CS0_START              0
+#define M_MC_CS0_START              _SB_MAKEMASK(16,S_MC_CS0_START)
+#define V_MC_CS0_START(x)           _SB_MAKEVALUE(x,S_MC_CS0_START)
+#define G_MC_CS0_START(x)           _SB_GETVALUE(x,S_MC_CS0_START,M_MC_CS0_START)
+
+#define S_MC_CS1_START              16
+#define M_MC_CS1_START              _SB_MAKEMASK(16,S_MC_CS1_START)
+#define V_MC_CS1_START(x)           _SB_MAKEVALUE(x,S_MC_CS1_START)
+#define G_MC_CS1_START(x)           _SB_GETVALUE(x,S_MC_CS1_START,M_MC_CS1_START)
+
+#define S_MC_CS2_START              32
+#define M_MC_CS2_START              _SB_MAKEMASK(16,S_MC_CS2_START)
+#define V_MC_CS2_START(x)           _SB_MAKEVALUE(x,S_MC_CS2_START)
+#define G_MC_CS2_START(x)           _SB_GETVALUE(x,S_MC_CS2_START,M_MC_CS2_START)
+
+#define S_MC_CS3_START              48
+#define M_MC_CS3_START              _SB_MAKEMASK(16,S_MC_CS3_START)
+#define V_MC_CS3_START(x)           _SB_MAKEVALUE(x,S_MC_CS3_START)
+#define G_MC_CS3_START(x)           _SB_GETVALUE(x,S_MC_CS3_START,M_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 6-18)
+ */
+
+#define S_MC_CS0_END                0
+#define M_MC_CS0_END                _SB_MAKEMASK(16,S_MC_CS0_END)
+#define V_MC_CS0_END(x)             _SB_MAKEVALUE(x,S_MC_CS0_END)
+#define G_MC_CS0_END(x)             _SB_GETVALUE(x,S_MC_CS0_END,M_MC_CS0_END)
+
+#define S_MC_CS1_END                16
+#define M_MC_CS1_END                _SB_MAKEMASK(16,S_MC_CS1_END)
+#define V_MC_CS1_END(x)             _SB_MAKEVALUE(x,S_MC_CS1_END)
+#define G_MC_CS1_END(x)             _SB_GETVALUE(x,S_MC_CS1_END,M_MC_CS1_END)
+
+#define S_MC_CS2_END                32
+#define M_MC_CS2_END                _SB_MAKEMASK(16,S_MC_CS2_END)
+#define V_MC_CS2_END(x)             _SB_MAKEVALUE(x,S_MC_CS2_END)
+#define G_MC_CS2_END(x)             _SB_GETVALUE(x,S_MC_CS2_END,M_MC_CS2_END)
+
+#define S_MC_CS3_END                48
+#define M_MC_CS3_END                _SB_MAKEMASK(16,S_MC_CS3_END)
+#define V_MC_CS3_END(x)             _SB_MAKEVALUE(x,S_MC_CS3_END)
+#define G_MC_CS3_END(x)             _SB_GETVALUE(x,S_MC_CS3_END,M_MC_CS3_END)
+
+/*
+ * Chip Select Interleave Register (Table 6-19)
+ */
+
+#define S_MC_INTLV_RESERVED         0
+#define M_MC_INTLV_RESERVED         _SB_MAKEMASK(5,S_MC_INTLV_RESERVED)
+
+#define S_MC_INTERLEAVE             7
+#define M_MC_INTERLEAVE             _SB_MAKEMASK(18,S_MC_INTERLEAVE)
+#define V_MC_INTERLEAVE(x)          _SB_MAKEVALUE(x,S_MC_INTERLEAVE)
+
+#define S_MC_INTLV_MBZ              25
+#define M_MC_INTLV_MBZ              _SB_MAKEMASK(39,S_MC_INTLV_MBZ)
+
+/*
+ * Row Address Bits Register (Table 6-20)
+ */
+
+#define S_MC_RAS_RESERVED           0
+#define M_MC_RAS_RESERVED           _SB_MAKEMASK(5,S_MC_RAS_RESERVED)
+
+#define S_MC_RAS_SELECT             12
+#define M_MC_RAS_SELECT             _SB_MAKEMASK(25,S_MC_RAS_SELECT)
+#define V_MC_RAS_SELECT(x)          _SB_MAKEVALUE(x,S_MC_RAS_SELECT)
+
+#define S_MC_RAS_MBZ                37
+#define M_MC_RAS_MBZ                _SB_MAKEMASK(27,S_MC_RAS_MBZ)
+
+
+/*
+ * Column Address Bits Register (Table 6-21)
+ */
+
+#define S_MC_CAS_RESERVED           0
+#define M_MC_CAS_RESERVED           _SB_MAKEMASK(5,S_MC_CAS_RESERVED)
+
+#define S_MC_CAS_SELECT             5
+#define M_MC_CAS_SELECT             _SB_MAKEMASK(18,S_MC_CAS_SELECT)
+#define V_MC_CAS_SELECT(x)          _SB_MAKEVALUE(x,S_MC_CAS_SELECT)
+
+#define S_MC_CAS_MBZ                23
+#define M_MC_CAS_MBZ                _SB_MAKEMASK(41,S_MC_CAS_MBZ)
+
+
+/*
+ * Bank Address Address Bits Register (Table 6-22)
+ */
+
+#define S_MC_BA_RESERVED            0
+#define M_MC_BA_RESERVED            _SB_MAKEMASK(5,S_MC_BA_RESERVED)
+
+#define S_MC_BA_SELECT              5
+#define M_MC_BA_SELECT              _SB_MAKEMASK(20,S_MC_BA_SELECT)
+#define V_MC_BA_SELECT(x)           _SB_MAKEVALUE(x,S_MC_BA_SELECT)
+
+#define S_MC_BA_MBZ                 25
+#define M_MC_BA_MBZ                 _SB_MAKEMASK(39,S_MC_BA_MBZ)
+
+/*
+ * Chip Select Attribute Register (Table 6-23)
+ */
+
+#define K_MC_CS_ATTR_CLOSED         0
+#define K_MC_CS_ATTR_CASCHECK       1
+#define K_MC_CS_ATTR_HINT           2
+#define K_MC_CS_ATTR_OPEN           3
+
+#define S_MC_CS0_PAGE               0
+#define M_MC_CS0_PAGE               _SB_MAKEMASK(2,S_MC_CS0_PAGE)
+#define V_MC_CS0_PAGE(x)            _SB_MAKEVALUE(x,S_MC_CS0_PAGE)
+#define G_MC_CS0_PAGE(x)            _SB_GETVALUE(x,S_MC_CS0_PAGE,M_MC_CS0_PAGE)
+
+#define S_MC_CS1_PAGE               16
+#define M_MC_CS1_PAGE               _SB_MAKEMASK(2,S_MC_CS1_PAGE)
+#define V_MC_CS1_PAGE(x)            _SB_MAKEVALUE(x,S_MC_CS1_PAGE)
+#define G_MC_CS1_PAGE(x)            _SB_GETVALUE(x,S_MC_CS1_PAGE,M_MC_CS1_PAGE)
+
+#define S_MC_CS2_PAGE               32
+#define M_MC_CS2_PAGE               _SB_MAKEMASK(2,S_MC_CS2_PAGE)
+#define V_MC_CS2_PAGE(x)            _SB_MAKEVALUE(x,S_MC_CS2_PAGE)
+#define G_MC_CS2_PAGE(x)            _SB_GETVALUE(x,S_MC_CS2_PAGE,M_MC_CS2_PAGE)
+
+#define S_MC_CS3_PAGE               48
+#define M_MC_CS3_PAGE               _SB_MAKEMASK(2,S_MC_CS3_PAGE)
+#define V_MC_CS3_PAGE(x)            _SB_MAKEVALUE(x,S_MC_CS3_PAGE)
+#define G_MC_CS3_PAGE(x)            _SB_GETVALUE(x,S_MC_CS3_PAGE,M_MC_CS3_PAGE)
+
+/*
+ * ECC Test ECC Register (Table 6-25)
+ */
+
+#define S_MC_ECC_INVERT             0
+#define M_MC_ECC_INVERT             _SB_MAKEMASK(8,S_MC_ECC_INVERT)
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
new file mode 100644
index 000000000000..5d496c6faba6
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -0,0 +1,836 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Register Definitions                     File: sb1250_regs.h
+    *  
+    *  This module contains the addresses of the on-chip peripherals
+    *  on the SB1250.
+    *  
+    *  SB1250 specification level:  01/02/2002
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_REGS_H
+#define _SB1250_REGS_H
+
+#include "sb1250_defs.h"
+
+
+/*  *********************************************************************
+    *  Some general notes:
+    *  
+    *  For the most part, when there is more than one peripheral
+    *  of the same type on the SOC, the constants below will be
+    *  offsets from the base of each peripheral.  For example,
+    *  the MAC registers are described as offsets from the first
+    *  MAC register, and there will be a MAC_REGISTER() macro
+    *  to calculate the base address of a given MAC.  
+    *  
+    *  The information in this file is based on the SB1250 SOC
+    *  manual version 0.2, July 2000.
+    ********************************************************************* */
+
+
+/*  ********************************************************************* 
+    * Memory Controller Registers
+    ********************************************************************* */
+
+/*
+ * XXX: can't remove MC base 0 if 112x, since it's used by other macros,
+ * since there is one reg there (but it could get its addr/offset constant).
+ */
+#define A_MC_BASE_0                 0x0010051000
+#define A_MC_BASE_1                 0x0010052000
+#define MC_REGISTER_SPACING         0x1000
+
+#define A_MC_BASE(ctlid)            ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_REGISTER(ctlid,reg)    (A_MC_BASE(ctlid)+(reg))
+
+#define R_MC_CONFIG                 0x0000000100
+#define R_MC_DRAMCMD                0x0000000120
+#define R_MC_DRAMMODE               0x0000000140
+#define R_MC_TIMING1                0x0000000160
+#define R_MC_TIMING2                0x0000000180
+#define R_MC_CS_START               0x00000001A0
+#define R_MC_CS_END                 0x00000001C0
+#define R_MC_CS_INTERLEAVE          0x00000001E0
+#define S_MC_CS_STARTEND            16
+
+#define R_MC_CSX_BASE               0x0000000200
+#define R_MC_CSX_ROW                0x0000000000	/* relative to CSX_BASE, above */
+#define R_MC_CSX_COL                0x0000000020	/* relative to CSX_BASE, above */
+#define R_MC_CSX_BA                 0x0000000040	/* relative to CSX_BASE, above */
+#define MC_CSX_SPACING              0x0000000060	/* relative to CSX_BASE, above */
+
+#define R_MC_CS0_ROW                0x0000000200
+#define R_MC_CS0_COL                0x0000000220
+#define R_MC_CS0_BA                 0x0000000240
+#define R_MC_CS1_ROW                0x0000000260
+#define R_MC_CS1_COL                0x0000000280
+#define R_MC_CS1_BA                 0x00000002A0
+#define R_MC_CS2_ROW                0x00000002C0
+#define R_MC_CS2_COL                0x00000002E0
+#define R_MC_CS2_BA                 0x0000000300
+#define R_MC_CS3_ROW                0x0000000320
+#define R_MC_CS3_COL                0x0000000340
+#define R_MC_CS3_BA                 0x0000000360
+#define R_MC_CS_ATTR                0x0000000380
+#define R_MC_TEST_DATA              0x0000000400
+#define R_MC_TEST_ECC               0x0000000420
+#define R_MC_MCLK_CFG               0x0000000500
+
+/*  ********************************************************************* 
+    * L2 Cache Control Registers
+    ********************************************************************* */
+
+#define A_L2_READ_TAG               0x0010040018
+#define A_L2_ECC_TAG                0x0010040038
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_READ_MISC              0x0010040058
+#endif /* 1250 PASS3 || 112x PASS1 */
+#define A_L2_WAY_DISABLE            0x0010041000
+#define A_L2_MAKEDISABLE(x)         (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE          0x00D0000000
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_CACHE_DISABLE	   0x0010042000
+#define A_L2_MAKECACHEDISABLE(x)   (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8))
+#define A_L2_MISC_CONFIG	   0x0010043000
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/* Backward-compatibility definitions.  */
+/* XXX: discourage people from using these constants.  */
+#define A_L2_READ_ADDRESS           A_L2_READ_TAG
+#define A_L2_EEC_ADDRESS            A_L2_ECC_TAG
+
+
+/*  ********************************************************************* 
+    * PCI Interface Registers
+    ********************************************************************* */
+
+#define A_PCI_TYPE00_HEADER         0x00DE000000
+#define A_PCI_TYPE01_HEADER         0x00DE000800
+
+
+/*  ********************************************************************* 
+    * Ethernet DMA and MACs
+    ********************************************************************* */
+
+#define A_MAC_BASE_0                0x0010064000
+#define A_MAC_BASE_1                0x0010065000
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+#define A_MAC_BASE_2                0x0010066000
+#endif /* 1250 */
+
+#define MAC_SPACING                 0x1000
+#define MAC_DMA_TXRX_SPACING        0x0400
+#define MAC_DMA_CHANNEL_SPACING     0x0100
+#define DMA_RX                      0
+#define DMA_TX                      1
+#define MAC_NUM_DMACHAN		    2		    /* channels per direction */
+
+/* XXX: not correct; depends on SOC type.  */
+#define MAC_NUM_PORTS               3
+
+#define A_MAC_CHANNEL_BASE(macnum)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum))
+
+#define A_MAC_REGISTER(macnum,reg)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum) + (reg))
+
+
+#define R_MAC_DMA_CHANNELS		0x800 /* Relative to A_MAC_CHANNEL_BASE */
+
+#define A_MAC_DMA_CHANNEL_BASE(macnum,txrx,chan)    \
+             ((A_MAC_CHANNEL_BASE(macnum)) +        \
+             R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define R_MAC_DMA_CHANNEL_BASE(txrx,chan)    \
+             (R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define A_MAC_DMA_REGISTER(macnum,txrx,chan,reg)           \
+            (A_MAC_DMA_CHANNEL_BASE(macnum,txrx,chan) +    \
+            (reg))
+
+#define R_MAC_DMA_REGISTER(txrx,chan,reg)           \
+            (R_MAC_DMA_CHANNEL_BASE(txrx,chan) +    \
+            (reg))
+
+/* 
+ * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
+ */
+
+#define R_MAC_DMA_CONFIG0               0x00000000
+#define R_MAC_DMA_CONFIG1               0x00000008
+#define R_MAC_DMA_DSCR_BASE             0x00000010
+#define R_MAC_DMA_DSCR_CNT              0x00000018
+#define R_MAC_DMA_CUR_DSCRA             0x00000020
+#define R_MAC_DMA_CUR_DSCRB             0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR          0x00000030
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_DMA_OODPKTLOST_RX         0x00000038	/* rx only */
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * RMON Counters
+ */
+
+#define R_MAC_RMON_TX_BYTES             0x00000000
+#define R_MAC_RMON_COLLISIONS           0x00000008
+#define R_MAC_RMON_LATE_COL             0x00000010
+#define R_MAC_RMON_EX_COL               0x00000018
+#define R_MAC_RMON_FCS_ERROR            0x00000020
+#define R_MAC_RMON_TX_ABORT             0x00000028
+/* Counter #6 (0x30) now reserved */
+#define R_MAC_RMON_TX_BAD               0x00000038
+#define R_MAC_RMON_TX_GOOD              0x00000040
+#define R_MAC_RMON_TX_RUNT              0x00000048
+#define R_MAC_RMON_TX_OVERSIZE          0x00000050
+#define R_MAC_RMON_RX_BYTES             0x00000080
+#define R_MAC_RMON_RX_MCAST             0x00000088
+#define R_MAC_RMON_RX_BCAST             0x00000090
+#define R_MAC_RMON_RX_BAD               0x00000098
+#define R_MAC_RMON_RX_GOOD              0x000000A0
+#define R_MAC_RMON_RX_RUNT              0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE          0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR         0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR      0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR        0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR       0x000000D0
+
+/* Updated to spec 0.2 */
+#define R_MAC_CFG                       0x00000100
+#define R_MAC_THRSH_CFG                 0x00000108
+#define R_MAC_VLANTAG                   0x00000110
+#define R_MAC_FRAMECFG                  0x00000118
+#define R_MAC_EOPCNT                    0x00000120
+#define R_MAC_FIFO_PTRS                 0x00000130
+#define R_MAC_ADFILTER_CFG              0x00000200
+#define R_MAC_ETHERNET_ADDR             0x00000208
+#define R_MAC_PKT_TYPE                  0x00000210
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_ADMASK0			0x00000218
+#define R_MAC_ADMASK1			0x00000220
+#endif /* 1250 PASS3 || 112x PASS1 */
+#define R_MAC_HASH_BASE                 0x00000240
+#define R_MAC_ADDR_BASE                 0x00000280
+#define R_MAC_CHLO0_BASE                0x00000300
+#define R_MAC_CHUP0_BASE                0x00000320
+#define R_MAC_ENABLE                    0x00000400
+#define R_MAC_STATUS                    0x00000408
+#define R_MAC_INT_MASK                  0x00000410
+#define R_MAC_TXD_CTL                   0x00000420
+#define R_MAC_MDIO                      0x00000428
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_STATUS1		        0x00000430
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define R_MAC_DEBUG_STATUS              0x00000448
+
+#define MAC_HASH_COUNT			8
+#define MAC_ADDR_COUNT			8
+#define MAC_CHMAP_COUNT			4
+
+
+/*  ********************************************************************* 
+    * DUART Registers
+    ********************************************************************* */
+
+
+#define R_DUART_NUM_PORTS           2
+
+#define A_DUART                     0x0010060000
+
+#define A_DUART_REG(r)
+
+#define DUART_CHANREG_SPACING       0x100
+#define A_DUART_CHANREG(chan,reg)   (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
+#define R_DUART_CHANREG(chan,reg)   (DUART_CHANREG_SPACING*(chan) + (reg))
+
+#define R_DUART_MODE_REG_1	    0x100
+#define R_DUART_MODE_REG_2	    0x110
+#define R_DUART_STATUS              0x120
+#define R_DUART_CLK_SEL             0x130
+#define R_DUART_CMD                 0x150
+#define R_DUART_RX_HOLD             0x160
+#define R_DUART_TX_HOLD             0x170
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_DUART_FULL_CTL	    0x140
+#define R_DUART_OPCR_X		    0x180
+#define R_DUART_AUXCTL_X	    0x190
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*
+ * The IMR and ISR can't be addressed with A_DUART_CHANREG,
+ * so use this macro instead.
+ */
+
+#define R_DUART_AUX_CTRL            0x310
+#define R_DUART_ISR_A               0x320
+#define R_DUART_IMR_A               0x330
+#define R_DUART_ISR_B               0x340
+#define R_DUART_IMR_B               0x350
+#define R_DUART_OUT_PORT            0x360
+#define R_DUART_OPCR                0x370
+
+#define R_DUART_SET_OPR		    0x3B0
+#define R_DUART_CLEAR_OPR	    0x3C0
+
+#define DUART_IMRISR_SPACING        0x20
+
+#define R_DUART_IMRREG(chan)	    (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan)	    (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
+
+#define A_DUART_IMRREG(chan)	    (A_DUART + R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan)	    (A_DUART + R_DUART_ISRREG(chan))
+
+
+
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_DUART_MODE_REG_1_A        0x0010060100
+#define A_DUART_MODE_REG_2_A        0x0010060110
+#define A_DUART_STATUS_A            0x0010060120
+#define A_DUART_CLK_SEL_A           0x0010060130
+#define A_DUART_CMD_A               0x0010060150
+#define A_DUART_RX_HOLD_A           0x0010060160
+#define A_DUART_TX_HOLD_A           0x0010060170
+
+#define A_DUART_MODE_REG_1_B        0x0010060200
+#define A_DUART_MODE_REG_2_B        0x0010060210
+#define A_DUART_STATUS_B            0x0010060220
+#define A_DUART_CLK_SEL_B           0x0010060230
+#define A_DUART_CMD_B               0x0010060250
+#define A_DUART_RX_HOLD_B           0x0010060260
+#define A_DUART_TX_HOLD_B           0x0010060270
+
+#define A_DUART_INPORT_CHNG         0x0010060300
+#define A_DUART_AUX_CTRL            0x0010060310
+#define A_DUART_ISR_A               0x0010060320
+#define A_DUART_IMR_A               0x0010060330
+#define A_DUART_ISR_B               0x0010060340
+#define A_DUART_IMR_B               0x0010060350
+#define A_DUART_OUT_PORT            0x0010060360
+#define A_DUART_OPCR                0x0010060370
+#define A_DUART_IN_PORT             0x0010060380
+#define A_DUART_ISR                 0x0010060390
+#define A_DUART_IMR                 0x00100603A0
+#define A_DUART_SET_OPR             0x00100603B0
+#define A_DUART_CLEAR_OPR           0x00100603C0
+#define A_DUART_INPORT_CHNG_A       0x00100603D0
+#define A_DUART_INPORT_CHNG_B       0x00100603E0
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DUART_FULL_CTL_A	    0x0010060140
+#define A_DUART_FULL_CTL_B	    0x0010060240
+
+#define A_DUART_OPCR_A	  	    0x0010060180
+#define A_DUART_OPCR_B	  	    0x0010060280
+
+#define A_DUART_INPORT_CHNG_DEBUG   0x00100603F0
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*  ********************************************************************* 
+    * Synchronous Serial Registers
+    ********************************************************************* */
+
+
+#define A_SER_BASE_0                0x0010060400
+#define A_SER_BASE_1                0x0010060800
+#define SER_SPACING                 0x400
+
+#define SER_DMA_TXRX_SPACING        0x80
+
+#define SER_NUM_PORTS               2
+
+#define A_SER_CHANNEL_BASE(sernum)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum))
+
+#define A_SER_REGISTER(sernum,reg)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum) + (reg))
+
+
+#define R_SER_DMA_CHANNELS		0   /* Relative to A_SER_BASE_x */
+
+#define A_SER_DMA_CHANNEL_BASE(sernum,txrx)    \
+             ((A_SER_CHANNEL_BASE(sernum)) +        \
+             R_SER_DMA_CHANNELS +                   \
+             (SER_DMA_TXRX_SPACING*(txrx)))
+
+#define A_SER_DMA_REGISTER(sernum,txrx,reg)           \
+            (A_SER_DMA_CHANNEL_BASE(sernum,txrx) +    \
+            (reg))
+
+
+/* 
+ * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
+ */
+
+#define R_SER_DMA_CONFIG0           0x00000000
+#define R_SER_DMA_CONFIG1           0x00000008
+#define R_SER_DMA_DSCR_BASE         0x00000010
+#define R_SER_DMA_DSCR_CNT          0x00000018
+#define R_SER_DMA_CUR_DSCRA         0x00000020
+#define R_SER_DMA_CUR_DSCRB         0x00000028
+#define R_SER_DMA_CUR_DSCRADDR      0x00000030
+
+#define R_SER_DMA_CONFIG0_RX        0x00000000
+#define R_SER_DMA_CONFIG1_RX        0x00000008
+#define R_SER_DMA_DSCR_BASE_RX      0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX     0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX     0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX     0x00000028
+#define R_SER_DMA_CUR_DSCR_ADDR_RX  0x00000030
+
+#define R_SER_DMA_CONFIG0_TX        0x00000080
+#define R_SER_DMA_CONFIG1_TX        0x00000088
+#define R_SER_DMA_DSCR_BASE_TX      0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX     0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX     0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX     0x000000A8
+#define R_SER_DMA_CUR_DSCR_ADDR_TX  0x000000B0
+
+#define R_SER_MODE                  0x00000100
+#define R_SER_MINFRM_SZ             0x00000108
+#define R_SER_MAXFRM_SZ             0x00000110
+#define R_SER_ADDR                  0x00000118
+#define R_SER_USR0_ADDR             0x00000120
+#define R_SER_USR1_ADDR             0x00000128
+#define R_SER_USR2_ADDR             0x00000130
+#define R_SER_USR3_ADDR             0x00000138
+#define R_SER_CMD                   0x00000140
+#define R_SER_TX_RD_THRSH           0x00000160
+#define R_SER_TX_WR_THRSH           0x00000168
+#define R_SER_RX_RD_THRSH           0x00000170
+#define R_SER_LINE_MODE		    0x00000178
+#define R_SER_DMA_ENABLE            0x00000180
+#define R_SER_INT_MASK              0x00000190
+#define R_SER_STATUS                0x00000188
+#define R_SER_STATUS_DEBUG          0x000001A8
+#define R_SER_RX_TABLE_BASE         0x00000200
+#define SER_RX_TABLE_COUNT          16
+#define R_SER_TX_TABLE_BASE         0x00000300
+#define SER_TX_TABLE_COUNT          16
+
+/* RMON Counters */
+#define R_SER_RMON_TX_BYTE_LO       0x000001C0
+#define R_SER_RMON_TX_BYTE_HI       0x000001C8
+#define R_SER_RMON_RX_BYTE_LO       0x000001D0
+#define R_SER_RMON_RX_BYTE_HI       0x000001D8
+#define R_SER_RMON_TX_UNDERRUN      0x000001E0
+#define R_SER_RMON_RX_OVERFLOW      0x000001E8
+#define R_SER_RMON_RX_ERRORS        0x000001F0
+#define R_SER_RMON_RX_BADADDR       0x000001F8
+
+/*  ********************************************************************* 
+    * Generic Bus Registers
+    ********************************************************************* */
+
+#define IO_EXT_CFG_COUNT            8
+
+#define A_IO_EXT_BASE		    0x0010061000
+#define A_IO_EXT_REG(r)		    (A_IO_EXT_BASE + (r))
+
+#define A_IO_EXT_CFG_BASE           0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE     0x0010061100
+#define A_IO_EXT_START_ADDR_BASE    0x0010061200
+#define A_IO_EXT_TIME_CFG0_BASE     0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE     0x0010061700
+
+#define IO_EXT_REGISTER_SPACING	    8
+#define A_IO_EXT_CS_BASE(cs)	    (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
+#define R_IO_EXT_REG(reg,cs)	    ((cs)*IO_EXT_REGISTER_SPACING + (reg))
+
+#define R_IO_EXT_CFG		    0x0000
+#define R_IO_EXT_MULT_SIZE          0x0100
+#define R_IO_EXT_START_ADDR	    0x0200
+#define R_IO_EXT_TIME_CFG0          0x0600
+#define R_IO_EXT_TIME_CFG1          0x0700
+
+
+#define A_IO_INTERRUPT_STATUS       0x0010061A00
+#define A_IO_INTERRUPT_DATA0        0x0010061A10
+#define A_IO_INTERRUPT_DATA1        0x0010061A18
+#define A_IO_INTERRUPT_DATA2        0x0010061A20
+#define A_IO_INTERRUPT_DATA3        0x0010061A28
+#define A_IO_INTERRUPT_ADDR0        0x0010061A30
+#define A_IO_INTERRUPT_ADDR1        0x0010061A40
+#define A_IO_INTERRUPT_PARITY       0x0010061A50
+#define A_IO_PCMCIA_CFG             0x0010061A60
+#define A_IO_PCMCIA_STATUS          0x0010061A70
+#define A_IO_DRIVE_0		    0x0010061300
+#define A_IO_DRIVE_1		    0x0010061308
+#define A_IO_DRIVE_2		    0x0010061310
+#define A_IO_DRIVE_3		    0x0010061318
+#define A_IO_DRIVE_BASE		    A_IO_DRIVE_0
+#define IO_DRIVE_REGISTER_SPACING   8
+#define R_IO_DRIVE(x)		    ((x)*IO_DRIVE_REGISTER_SPACING)
+#define A_IO_DRIVE(x)		    (A_IO_DRIVE_BASE + R_IO_DRIVE(x))
+
+#define R_IO_INTERRUPT_STATUS       0x0A00
+#define R_IO_INTERRUPT_DATA0        0x0A10
+#define R_IO_INTERRUPT_DATA1        0x0A18
+#define R_IO_INTERRUPT_DATA2        0x0A20
+#define R_IO_INTERRUPT_DATA3        0x0A28
+#define R_IO_INTERRUPT_ADDR0        0x0A30
+#define R_IO_INTERRUPT_ADDR1        0x0A40
+#define R_IO_INTERRUPT_PARITY       0x0A50
+#define R_IO_PCMCIA_CFG             0x0A60
+#define R_IO_PCMCIA_STATUS          0x0A70
+
+/*  ********************************************************************* 
+    * GPIO Registers
+    ********************************************************************* */
+
+#define A_GPIO_CLR_EDGE             0x0010061A80
+#define A_GPIO_INT_TYPE             0x0010061A88
+#define A_GPIO_INPUT_INVERT         0x0010061A90
+#define A_GPIO_GLITCH               0x0010061A98
+#define A_GPIO_READ                 0x0010061AA0
+#define A_GPIO_DIRECTION            0x0010061AA8
+#define A_GPIO_PIN_CLR              0x0010061AB0
+#define A_GPIO_PIN_SET              0x0010061AB8
+
+#define A_GPIO_BASE		    0x0010061A80
+
+#define R_GPIO_CLR_EDGE             0x00
+#define R_GPIO_INT_TYPE             0x08
+#define R_GPIO_INPUT_INVERT         0x10
+#define R_GPIO_GLITCH               0x18
+#define R_GPIO_READ                 0x20
+#define R_GPIO_DIRECTION            0x28
+#define R_GPIO_PIN_CLR              0x30
+#define R_GPIO_PIN_SET              0x38
+
+/*  ********************************************************************* 
+    * SMBus Registers
+    ********************************************************************* */
+
+#define A_SMB_XTRA_0                0x0010060000
+#define A_SMB_XTRA_1                0x0010060008
+#define A_SMB_FREQ_0                0x0010060010
+#define A_SMB_FREQ_1                0x0010060018
+#define A_SMB_STATUS_0              0x0010060020
+#define A_SMB_STATUS_1              0x0010060028
+#define A_SMB_CMD_0                 0x0010060030
+#define A_SMB_CMD_1                 0x0010060038
+#define A_SMB_START_0               0x0010060040
+#define A_SMB_START_1               0x0010060048
+#define A_SMB_DATA_0                0x0010060050
+#define A_SMB_DATA_1                0x0010060058
+#define A_SMB_CONTROL_0             0x0010060060
+#define A_SMB_CONTROL_1             0x0010060068
+#define A_SMB_PEC_0                 0x0010060070
+#define A_SMB_PEC_1                 0x0010060078
+
+#define A_SMB_0                     0x0010060000
+#define A_SMB_1                     0x0010060008
+#define SMB_REGISTER_SPACING        0x8
+#define A_SMB_BASE(idx)             (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_REGISTER(idx,reg)     (A_SMB_BASE(idx)+(reg))
+
+#define R_SMB_XTRA                  0x0000000000
+#define R_SMB_FREQ                  0x0000000010
+#define R_SMB_STATUS                0x0000000020
+#define R_SMB_CMD                   0x0000000030
+#define R_SMB_START                 0x0000000040
+#define R_SMB_DATA                  0x0000000050
+#define R_SMB_CONTROL               0x0000000060
+#define R_SMB_PEC                   0x0000000070
+
+/*  ********************************************************************* 
+    * Timer Registers
+    ********************************************************************* */
+
+/*
+ * Watchdog timers
+ */
+
+#define A_SCD_WDOG_0		    0x0010020050
+#define A_SCD_WDOG_1                0x0010020150
+#define SCD_WDOG_SPACING            0x100
+#define SCD_NUM_WDOGS		    2
+#define A_SCD_WDOG_BASE(w)          (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_REGISTER(w,r)    (A_SCD_WDOG_BASE(w) + (r))
+
+#define R_SCD_WDOG_INIT		    0x0000000000
+#define R_SCD_WDOG_CNT		    0x0000000008
+#define R_SCD_WDOG_CFG		    0x0000000010
+
+#define A_SCD_WDOG_INIT_0           0x0010020050
+#define A_SCD_WDOG_CNT_0            0x0010020058
+#define A_SCD_WDOG_CFG_0            0x0010020060
+
+#define A_SCD_WDOG_INIT_1           0x0010020150
+#define A_SCD_WDOG_CNT_1            0x0010020158
+#define A_SCD_WDOG_CFG_1            0x0010020160
+
+/*
+ * Generic timers
+ */
+
+#define A_SCD_TIMER_0		    0x0010020070
+#define A_SCD_TIMER_1               0x0010020078
+#define A_SCD_TIMER_2		    0x0010020170
+#define A_SCD_TIMER_3               0x0010020178
+#define SCD_NUM_TIMERS		    4
+#define A_SCD_TIMER_BASE(w)         (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_REGISTER(w,r)   (A_SCD_TIMER_BASE(w) + (r))
+
+#define R_SCD_TIMER_INIT	    0x0000000000
+#define R_SCD_TIMER_CNT		    0x0000000010
+#define R_SCD_TIMER_CFG		    0x0000000020
+
+#define A_SCD_TIMER_INIT_0          0x0010020070
+#define A_SCD_TIMER_CNT_0           0x0010020080
+#define A_SCD_TIMER_CFG_0           0x0010020090
+
+#define A_SCD_TIMER_INIT_1          0x0010020078
+#define A_SCD_TIMER_CNT_1           0x0010020088
+#define A_SCD_TIMER_CFG_1           0x0010020098
+
+#define A_SCD_TIMER_INIT_2          0x0010020170
+#define A_SCD_TIMER_CNT_2           0x0010020180
+#define A_SCD_TIMER_CFG_2           0x0010020190
+
+#define A_SCD_TIMER_INIT_3          0x0010020178
+#define A_SCD_TIMER_CNT_3           0x0010020188
+#define A_SCD_TIMER_CFG_3           0x0010020198
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_SCRATCH		   0x0010020C10
+
+#define A_SCD_ZBBUS_CYCLE_COUNT	   0x0010030000
+#define A_SCD_ZBBUS_CYCLE_CP0	   0x0010020C00
+#define A_SCD_ZBBUS_CYCLE_CP1	   0x0010020C08
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*  ********************************************************************* 
+    * System Control Registers
+    ********************************************************************* */
+
+#define A_SCD_SYSTEM_REVISION       0x0010020000
+#define A_SCD_SYSTEM_CFG            0x0010020008
+#define A_SCD_SYSTEM_MANUF          0x0010038000
+
+/*  ********************************************************************* 
+    * System Address Trap Registers
+    ********************************************************************* */
+
+#define A_ADDR_TRAP_INDEX           0x00100200B0
+#define A_ADDR_TRAP_REG             0x00100200B8
+#define A_ADDR_TRAP_UP_0            0x0010020400
+#define A_ADDR_TRAP_UP_1            0x0010020408
+#define A_ADDR_TRAP_UP_2            0x0010020410
+#define A_ADDR_TRAP_UP_3            0x0010020418
+#define A_ADDR_TRAP_DOWN_0          0x0010020420
+#define A_ADDR_TRAP_DOWN_1          0x0010020428
+#define A_ADDR_TRAP_DOWN_2          0x0010020430
+#define A_ADDR_TRAP_DOWN_3          0x0010020438
+#define A_ADDR_TRAP_CFG_0           0x0010020440
+#define A_ADDR_TRAP_CFG_1           0x0010020448
+#define A_ADDR_TRAP_CFG_2           0x0010020450
+#define A_ADDR_TRAP_CFG_3           0x0010020458
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*  ********************************************************************* 
+    * System Interrupt Mapper Registers
+    ********************************************************************* */
+
+#define A_IMR_CPU0_BASE                 0x0010020000
+#define A_IMR_CPU1_BASE                 0x0010022000
+#define IMR_REGISTER_SPACING            0x2000
+#define IMR_REGISTER_SPACING_SHIFT      13
+
+#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
+#define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg))
+
+#define R_IMR_INTERRUPT_DIAG            0x0010
+#define R_IMR_INTERRUPT_MASK            0x0028
+#define R_IMR_INTERRUPT_TRACE           0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
+#define R_IMR_LDT_INTERRUPT_SET         0x0048
+#define R_IMR_LDT_INTERRUPT             0x0018
+#define R_IMR_LDT_INTERRUPT_CLR         0x0020
+#define R_IMR_MAILBOX_CPU               0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU         0x1000
+#define R_IMR_MAILBOX_SET_CPU           0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU     0x1008
+#define R_IMR_MAILBOX_CLR_CPU           0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE     0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT    7
+#define R_IMR_INTERRUPT_MAP_BASE        0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT       64
+
+/*  ********************************************************************* 
+    * System Performance Counter Registers
+    ********************************************************************* */
+
+#define A_SCD_PERF_CNT_CFG          0x00100204C0
+#define A_SCD_PERF_CNT_0            0x00100204D0
+#define A_SCD_PERF_CNT_1            0x00100204D8
+#define A_SCD_PERF_CNT_2            0x00100204E0
+#define A_SCD_PERF_CNT_3            0x00100204E8
+
+/*  ********************************************************************* 
+    * System Bus Watcher Registers
+    ********************************************************************* */
+
+#define A_SCD_BUS_ERR_STATUS        0x0010020880
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define A_BUS_ERR_DATA_0            0x00100208A0
+#define A_BUS_ERR_DATA_1            0x00100208A8
+#define A_BUS_ERR_DATA_2            0x00100208B0
+#define A_BUS_ERR_DATA_3            0x00100208B8
+#define A_BUS_L2_ERRORS             0x00100208C0
+#define A_BUS_MEM_IO_ERRORS         0x00100208C8
+
+/*  ********************************************************************* 
+    * System Debug Controller Registers
+    ********************************************************************* */
+
+#define A_SCD_JTAG_BASE             0x0010000000
+
+/*  ********************************************************************* 
+    * System Trace Buffer Registers
+    ********************************************************************* */
+
+#define A_SCD_TRACE_CFG             0x0010020A00
+#define A_SCD_TRACE_READ            0x0010020A08
+#define A_SCD_TRACE_EVENT_0         0x0010020A20
+#define A_SCD_TRACE_EVENT_1         0x0010020A28
+#define A_SCD_TRACE_EVENT_2         0x0010020A30
+#define A_SCD_TRACE_EVENT_3         0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0      0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1      0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2      0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3      0x0010020A58
+#define A_SCD_TRACE_EVENT_4         0x0010020A60
+#define A_SCD_TRACE_EVENT_5         0x0010020A68
+#define A_SCD_TRACE_EVENT_6         0x0010020A70
+#define A_SCD_TRACE_EVENT_7         0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4      0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5      0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
+
+/*  ********************************************************************* 
+    * System Generic DMA Registers
+    ********************************************************************* */
+
+#define A_DM_0		  	    0x0010020B00
+#define A_DM_1		  	    0x0010020B20
+#define A_DM_2			    0x0010020B40
+#define A_DM_3			    0x0010020B60
+#define DM_REGISTER_SPACING	    0x20
+#define DM_NUM_CHANNELS		    4
+#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING))
+#define A_DM_REGISTER(idx,reg) (A_DM_BASE(idx) + (reg))
+
+#define R_DM_DSCR_BASE		    0x0000000000
+#define R_DM_DSCR_COUNT		    0x0000000008
+#define R_DM_CUR_DSCR_ADDR	    0x0000000010
+#define R_DM_DSCR_BASE_DEBUG	    0x0000000018
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_PARTIAL_0		    0x0010020ba0
+#define A_DM_PARTIAL_1		    0x0010020ba8
+#define A_DM_PARTIAL_2		    0x0010020bb0
+#define A_DM_PARTIAL_3		    0x0010020bb8
+#define DM_PARTIAL_REGISTER_SPACING 0x8
+#define A_DM_PARTIAL(idx)	    (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING))
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_CRC_0		    0x0010020b80
+#define A_DM_CRC_1		    0x0010020b90
+#define DM_CRC_REGISTER_SPACING	    0x10
+#define DM_CRC_NUM_CHANNELS	    2
+#define A_DM_CRC_BASE(idx)	    (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING))
+#define A_DM_CRC_REGISTER(idx,reg)  (A_DM_CRC_BASE(idx) + (reg))
+
+#define R_CRC_DEF_0		    0x00
+#define R_CTCP_DEF_0		    0x08
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*  *********************************************************************
+    *  Physical Address Map
+    ********************************************************************* */
+
+#define A_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_PHYS_GENBUS			_SB_MAKE64(0x0010090000)
+#define A_PHYS_GENBUS_END		_SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32  _SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES  _SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES    _SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES   _SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS   _SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS     _SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS    _SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP                  _SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES     _SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS      _SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED                 _SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT     _SB_MAKE64(0xFD00000000)
+
+#define A_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS           4
+#define A_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D01E0000)
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
new file mode 100644
index 000000000000..22e8041959e2
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -0,0 +1,582 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  SCD Constants and Macros			File: sb1250_scd.h
+    *  
+    *  This module contains constants and macros useful for
+    *  manipulating the System Control and Debug module on the 1250.
+    *  
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_SCD_H
+#define _SB1250_SCD_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  System control/debug registers
+    ********************************************************************* */
+
+/*
+ * System Revision Register (Table 4-1)
+ */
+
+#define M_SYS_RESERVED		    _SB_MAKEMASK(8,0)
+
+#define S_SYS_REVISION              _SB_MAKE64(8)
+#define M_SYS_REVISION              _SB_MAKEMASK(8,S_SYS_REVISION)
+#define V_SYS_REVISION(x)           _SB_MAKEVALUE(x,S_SYS_REVISION)
+#define G_SYS_REVISION(x)           _SB_GETVALUE(x,S_SYS_REVISION,M_SYS_REVISION)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+#define K_SYS_REVISION_BCM1250_PASS1	1
+#define K_SYS_REVISION_BCM1250_PASS2	3
+#define K_SYS_REVISION_BCM1250_A10	11
+#define K_SYS_REVISION_BCM1250_PASS2_2	16
+#define K_SYS_REVISION_BCM1250_B2	17
+#define K_SYS_REVISION_BCM1250_PASS3	32
+#define K_SYS_REVISION_BCM1250_C1	33
+
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_REVISION_PASS1	    K_SYS_REVISION_BCM1250_PASS1
+#define K_SYS_REVISION_PASS2	    K_SYS_REVISION_BCM1250_PASS2
+#define K_SYS_REVISION_PASS2_2	    K_SYS_REVISION_BCM1250_PASS2_2
+#define K_SYS_REVISION_PASS3	    K_SYS_REVISION_BCM1250_PASS3
+#endif /* 1250 */
+
+#if SIBYTE_HDR_FEATURE_CHIP(112x)
+#define K_SYS_REVISION_BCM112x_A1	32
+#define K_SYS_REVISION_BCM112x_A2	33
+#endif /* 112x */
+
+/* XXX: discourage people from using these constants.  */
+#define S_SYS_PART                  _SB_MAKE64(16)
+#define M_SYS_PART                  _SB_MAKEMASK(16,S_SYS_PART)
+#define V_SYS_PART(x)               _SB_MAKEVALUE(x,S_SYS_PART)
+#define G_SYS_PART(x)               _SB_GETVALUE(x,S_SYS_PART,M_SYS_PART)
+
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_PART_SB1250           0x1250
+#define K_SYS_PART_BCM1120          0x1121
+#define K_SYS_PART_BCM1125          0x1123
+#define K_SYS_PART_BCM1125H         0x1124
+
+/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field.  */
+#define S_SYS_SOC_TYPE              _SB_MAKE64(16)
+#define M_SYS_SOC_TYPE              _SB_MAKEMASK(4,S_SYS_SOC_TYPE)
+#define V_SYS_SOC_TYPE(x)           _SB_MAKEVALUE(x,S_SYS_SOC_TYPE)
+#define G_SYS_SOC_TYPE(x)           _SB_GETVALUE(x,S_SYS_SOC_TYPE,M_SYS_SOC_TYPE)
+
+#define K_SYS_SOC_TYPE_BCM1250      0x0
+#define K_SYS_SOC_TYPE_BCM1120      0x1
+#define K_SYS_SOC_TYPE_BCM1250_ALT  0x2		/* 1250pass2 w/ 1/4 L2.  */
+#define K_SYS_SOC_TYPE_BCM1125      0x3
+#define K_SYS_SOC_TYPE_BCM1125H     0x4
+#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5		/* 1250pass2 w/ 1/2 L2.  */
+
+/*
+ * Calculate correct SOC type given a copy of system revision register.
+ *
+ * (For the assembler version, sysrev and dest may be the same register.
+ * Also, it clobbers AT.)
+ */
+#ifdef __ASSEMBLER__
+#define SYS_SOC_TYPE(dest, sysrev)					\
+	.set push ;							\
+	.set reorder ;							\
+	dsrl	dest, sysrev, S_SYS_SOC_TYPE ;				\
+	andi	dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE);		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ;		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f	 ;		\
+	b	992f ;							\
+991:	li	dest, K_SYS_SOC_TYPE_BCM1250 ;				\
+992:									\
+	.set pop
+#else
+#define SYS_SOC_TYPE(sysrev)						\
+	((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT		\
+	  || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2)	\
+	 ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev))
+#endif
+
+#define S_SYS_WID                   _SB_MAKE64(32)
+#define M_SYS_WID                   _SB_MAKEMASK(32,S_SYS_WID)
+#define V_SYS_WID(x)                _SB_MAKEVALUE(x,S_SYS_WID)
+#define G_SYS_WID(x)                _SB_GETVALUE(x,S_SYS_WID,M_SYS_WID)
+
+/* System Manufacturing Register
+* Register: SCD_SYSTEM_MANUF
+*/
+ 
+/* Wafer ID: bits 31:0 */
+#define S_SYS_WAFERID1_200        _SB_MAKE64(0)
+#define M_SYS_WAFERID1_200        _SB_MAKEMASK(32,S_SYS_WAFERID1_200)
+#define V_SYS_WAFERID1_200(x)     _SB_MAKEVALUE(x,S_SYS_WAFERID1_200)
+#define G_SYS_WAFERID1_200(x)     _SB_GETVALUE(x,S_SYS_WAFERID1_200,M_SYS_WAFERID1_200)
+ 
+#define S_SYS_BIN                 _SB_MAKE64(32)
+#define M_SYS_BIN                 _SB_MAKEMASK(4,S_SYS_BIN)
+#define V_SYS_BIN                 _SB_MAKEVALUE(x,S_SYS_BIN)
+#define G_SYS_BIN                 _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
+ 
+/* Wafer ID: bits 39:36 */
+#define S_SYS_WAFERID2_200        _SB_MAKE64(36)
+#define M_SYS_WAFERID2_200        _SB_MAKEMASK(4,S_SYS_WAFERID2_200)
+#define V_SYS_WAFERID2_200(x)     _SB_MAKEVALUE(x,S_SYS_WAFERID2_200)
+#define G_SYS_WAFERID2_200(x)     _SB_GETVALUE(x,S_SYS_WAFERID2_200,M_SYS_WAFERID2_200)
+ 
+/* Wafer ID: bits 39:0 */
+#define S_SYS_WAFERID_300         _SB_MAKE64(0)
+#define M_SYS_WAFERID_300         _SB_MAKEMASK(40,S_SYS_WAFERID_300)
+#define V_SYS_WAFERID_300(x)      _SB_MAKEVALUE(x,S_SYS_WAFERID_300)
+#define G_SYS_WAFERID_300(x)      _SB_GETVALUE(x,S_SYS_WAFERID_300,M_SYS_WAFERID_300)
+ 
+#define S_SYS_XPOS                _SB_MAKE64(40)
+#define M_SYS_XPOS                _SB_MAKEMASK(6,S_SYS_XPOS)
+#define V_SYS_XPOS(x)             _SB_MAKEVALUE(x,S_SYS_XPOS)
+#define G_SYS_XPOS(x)             _SB_GETVALUE(x,S_SYS_XPOS,M_SYS_XPOS)
+ 
+#define S_SYS_YPOS                _SB_MAKE64(46)
+#define M_SYS_YPOS                _SB_MAKEMASK(6,S_SYS_YPOS)
+#define V_SYS_YPOS(x)             _SB_MAKEVALUE(x,S_SYS_YPOS)
+#define G_SYS_YPOS(x)             _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
+ 
+/*
+ * System Config Register (Table 4-2)
+ * Register: SCD_SYSTEM_CFG
+ */
+
+#define M_SYS_LDT_PLL_BYP           _SB_MAKEMASK1(3)
+#define M_SYS_PCI_SYNC_TEST_MODE    _SB_MAKEMASK1(4)
+#define M_SYS_IOB0_DIV              _SB_MAKEMASK1(5)
+#define M_SYS_IOB1_DIV              _SB_MAKEMASK1(6)
+
+#define S_SYS_PLL_DIV               _SB_MAKE64(7)
+#define M_SYS_PLL_DIV               _SB_MAKEMASK(5,S_SYS_PLL_DIV)
+#define V_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x,S_SYS_PLL_DIV)
+#define G_SYS_PLL_DIV(x)            _SB_GETVALUE(x,S_SYS_PLL_DIV,M_SYS_PLL_DIV)
+
+#define M_SYS_SER0_ENABLE           _SB_MAKEMASK1(12)
+#define M_SYS_SER0_RSTB_EN          _SB_MAKEMASK1(13)
+#define M_SYS_SER1_ENABLE           _SB_MAKEMASK1(14)
+#define M_SYS_SER1_RSTB_EN          _SB_MAKEMASK1(15)
+#define M_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+
+#define S_SYS_BOOT_MODE             _SB_MAKE64(17)
+#define M_SYS_BOOT_MODE             _SB_MAKEMASK(2,S_SYS_BOOT_MODE)
+#define V_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x,S_SYS_BOOT_MODE)
+#define G_SYS_BOOT_MODE(x)          _SB_GETVALUE(x,S_SYS_BOOT_MODE,M_SYS_BOOT_MODE)
+#define K_SYS_BOOT_MODE_ROM32       0
+#define K_SYS_BOOT_MODE_ROM8        1
+#define K_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_SYS_BOOT_MODE_SMBUS_BIG   3
+
+#define M_SYS_PCI_HOST              _SB_MAKEMASK1(19)
+#define M_SYS_PCI_ARBITER           _SB_MAKEMASK1(20)
+#define M_SYS_SOUTH_ON_LDT          _SB_MAKEMASK1(21)
+#define M_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
+#define M_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
+#define M_SYS_LDT_TEST_EN           _SB_MAKEMASK1(24)
+#define M_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(25)
+
+#define S_SYS_CONFIG                26
+#define M_SYS_CONFIG                _SB_MAKEMASK(6,S_SYS_CONFIG)
+#define V_SYS_CONFIG(x)             _SB_MAKEVALUE(x,S_SYS_CONFIG)
+#define G_SYS_CONFIG(x)             _SB_GETVALUE(x,S_SYS_CONFIG,M_SYS_CONFIG)
+
+/* The following bits are writeable by JTAG only. */
+
+#define M_SYS_CLKSTOP               _SB_MAKEMASK1(32)
+#define M_SYS_CLKSTEP               _SB_MAKEMASK1(33)
+
+#define S_SYS_CLKCOUNT              34
+#define M_SYS_CLKCOUNT              _SB_MAKEMASK(8,S_SYS_CLKCOUNT)
+#define V_SYS_CLKCOUNT(x)           _SB_MAKEVALUE(x,S_SYS_CLKCOUNT)
+#define G_SYS_CLKCOUNT(x)           _SB_GETVALUE(x,S_SYS_CLKCOUNT,M_SYS_CLKCOUNT)
+
+#define M_SYS_PLL_BYPASS            _SB_MAKEMASK1(42)
+
+#define S_SYS_PLL_IREF		    43
+#define M_SYS_PLL_IREF		    _SB_MAKEMASK(2,S_SYS_PLL_IREF)
+
+#define S_SYS_PLL_VCO		    45
+#define M_SYS_PLL_VCO		    _SB_MAKEMASK(2,S_SYS_PLL_VCO)
+
+#define S_SYS_PLL_VREG		    47
+#define M_SYS_PLL_VREG		    _SB_MAKEMASK(2,S_SYS_PLL_VREG)
+
+#define M_SYS_MEM_RESET             _SB_MAKEMASK1(49)
+#define M_SYS_L2C_RESET             _SB_MAKEMASK1(50)
+#define M_SYS_IO_RESET_0            _SB_MAKEMASK1(51)
+#define M_SYS_IO_RESET_1            _SB_MAKEMASK1(52)
+#define M_SYS_SCD_RESET             _SB_MAKEMASK1(53)
+
+/* End of bits writable by JTAG only. */
+
+#define M_SYS_CPU_RESET_0           _SB_MAKEMASK1(54)
+#define M_SYS_CPU_RESET_1           _SB_MAKEMASK1(55)
+
+#define M_SYS_UNICPU0               _SB_MAKEMASK1(56)
+#define M_SYS_UNICPU1               _SB_MAKEMASK1(57)
+
+#define M_SYS_SB_SOFTRES            _SB_MAKEMASK1(58)
+#define M_SYS_EXT_RESET             _SB_MAKEMASK1(59)
+#define M_SYS_SYSTEM_RESET          _SB_MAKEMASK1(60)
+
+#define M_SYS_MISR_MODE             _SB_MAKEMASK1(61)
+#define M_SYS_MISR_RESET            _SB_MAKEMASK1(62)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*
+ * Mailbox Registers (Table 4-3)
+ * Registers: SCD_MBOX_CPU_x
+ */
+
+#define S_MBOX_INT_3                0
+#define M_MBOX_INT_3                _SB_MAKEMASK(16,S_MBOX_INT_3)
+#define S_MBOX_INT_2                16
+#define M_MBOX_INT_2                _SB_MAKEMASK(16,S_MBOX_INT_2)
+#define S_MBOX_INT_1                32
+#define M_MBOX_INT_1                _SB_MAKEMASK(16,S_MBOX_INT_1)
+#define S_MBOX_INT_0                48
+#define M_MBOX_INT_0                _SB_MAKEMASK(16,S_MBOX_INT_0)
+
+/*
+ * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ */
+
+#define V_SCD_WDOG_FREQ             1000000
+
+#define S_SCD_WDOG_INIT             0
+#define M_SCD_WDOG_INIT             _SB_MAKEMASK(23,S_SCD_WDOG_INIT)
+
+#define S_SCD_WDOG_CNT              0
+#define M_SCD_WDOG_CNT              _SB_MAKEMASK(23,S_SCD_WDOG_CNT)
+
+#define S_SCD_WDOG_ENABLE           0
+#define M_SCD_WDOG_ENABLE           _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
+
+#define S_SCD_WDOG_RESET_TYPE       2
+#define M_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(3,S_SCD_WDOG_RESET_TYPE)
+#define V_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x,S_SCD_WDOG_RESET_TYPE)
+#define G_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x,S_SCD_WDOG_RESET_TYPE,M_SCD_WDOG_RESET_TYPE)
+
+#define K_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
+#define K_SCD_WDOG_RESET_SOFT       1
+#define K_SCD_WDOG_RESET_CPU0       3
+#define K_SCD_WDOG_RESET_CPU1       5
+#define K_SCD_WDOG_RESET_BOTH_CPUS  7
+
+/* This feature is present in 1250 C0 and later, but *not* in 112x A revs.  */
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define S_SCD_WDOG_HAS_RESET        8
+#define M_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
+#endif
+
+
+/*
+ * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13)
+ */
+
+#define V_SCD_TIMER_FREQ            1000000
+
+#define S_SCD_TIMER_INIT            0
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(20,S_SCD_TIMER_INIT)
+#define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
+#define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
+
+#define S_SCD_TIMER_CNT             0
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(20,S_SCD_TIMER_CNT)
+#define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
+#define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT)
+
+#define M_SCD_TIMER_ENABLE          _SB_MAKEMASK1(0)
+#define M_SCD_TIMER_MODE            _SB_MAKEMASK1(1)
+#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE
+
+/*
+ * System Performance Counters
+ */
+
+#define S_SPC_CFG_SRC0            0
+#define M_SPC_CFG_SRC0            _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
+#define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
+#define G_SPC_CFG_SRC0(x)         _SB_GETVALUE(x,S_SPC_CFG_SRC0,M_SPC_CFG_SRC0)
+
+#define S_SPC_CFG_SRC1            8
+#define M_SPC_CFG_SRC1            _SB_MAKEMASK(8,S_SPC_CFG_SRC1)
+#define V_SPC_CFG_SRC1(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC1)
+#define G_SPC_CFG_SRC1(x)         _SB_GETVALUE(x,S_SPC_CFG_SRC1,M_SPC_CFG_SRC1)
+
+#define S_SPC_CFG_SRC2            16
+#define M_SPC_CFG_SRC2            _SB_MAKEMASK(8,S_SPC_CFG_SRC2)
+#define V_SPC_CFG_SRC2(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC2)
+#define G_SPC_CFG_SRC2(x)         _SB_GETVALUE(x,S_SPC_CFG_SRC2,M_SPC_CFG_SRC2)
+
+#define S_SPC_CFG_SRC3            24
+#define M_SPC_CFG_SRC3            _SB_MAKEMASK(8,S_SPC_CFG_SRC3)
+#define V_SPC_CFG_SRC3(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC3)
+#define G_SPC_CFG_SRC3(x)         _SB_GETVALUE(x,S_SPC_CFG_SRC3,M_SPC_CFG_SRC3)
+
+#define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
+#define M_SPC_CFG_ENABLE	_SB_MAKEMASK1(33)
+
+
+/*
+ * Bus Watcher
+ */
+
+#define S_SCD_BERR_TID            8
+#define M_SCD_BERR_TID            _SB_MAKEMASK(10,S_SCD_BERR_TID)
+#define V_SCD_BERR_TID(x)         _SB_MAKEVALUE(x,S_SCD_BERR_TID)
+#define G_SCD_BERR_TID(x)         _SB_GETVALUE(x,S_SCD_BERR_TID,M_SCD_BERR_TID)
+
+#define S_SCD_BERR_RID            18
+#define M_SCD_BERR_RID            _SB_MAKEMASK(4,S_SCD_BERR_RID)
+#define V_SCD_BERR_RID(x)         _SB_MAKEVALUE(x,S_SCD_BERR_RID)
+#define G_SCD_BERR_RID(x)         _SB_GETVALUE(x,S_SCD_BERR_RID,M_SCD_BERR_RID)
+
+#define S_SCD_BERR_DCODE          22
+#define M_SCD_BERR_DCODE          _SB_MAKEMASK(3,S_SCD_BERR_DCODE)
+#define V_SCD_BERR_DCODE(x)       _SB_MAKEVALUE(x,S_SCD_BERR_DCODE)
+#define G_SCD_BERR_DCODE(x)       _SB_GETVALUE(x,S_SCD_BERR_DCODE,M_SCD_BERR_DCODE)
+
+#define M_SCD_BERR_MULTERRS       _SB_MAKEMASK1(30)
+
+
+#define S_SCD_L2ECC_CORR_D        0
+#define M_SCD_L2ECC_CORR_D        _SB_MAKEMASK(8,S_SCD_L2ECC_CORR_D)
+#define V_SCD_L2ECC_CORR_D(x)     _SB_MAKEVALUE(x,S_SCD_L2ECC_CORR_D)
+#define G_SCD_L2ECC_CORR_D(x)     _SB_GETVALUE(x,S_SCD_L2ECC_CORR_D,M_SCD_L2ECC_CORR_D)
+
+#define S_SCD_L2ECC_BAD_D         8
+#define M_SCD_L2ECC_BAD_D         _SB_MAKEMASK(8,S_SCD_L2ECC_BAD_D)
+#define V_SCD_L2ECC_BAD_D(x)      _SB_MAKEVALUE(x,S_SCD_L2ECC_BAD_D)
+#define G_SCD_L2ECC_BAD_D(x)      _SB_GETVALUE(x,S_SCD_L2ECC_BAD_D,M_SCD_L2ECC_BAD_D)
+
+#define S_SCD_L2ECC_CORR_T        16
+#define M_SCD_L2ECC_CORR_T        _SB_MAKEMASK(8,S_SCD_L2ECC_CORR_T)
+#define V_SCD_L2ECC_CORR_T(x)     _SB_MAKEVALUE(x,S_SCD_L2ECC_CORR_T)
+#define G_SCD_L2ECC_CORR_T(x)     _SB_GETVALUE(x,S_SCD_L2ECC_CORR_T,M_SCD_L2ECC_CORR_T)
+
+#define S_SCD_L2ECC_BAD_T         24
+#define M_SCD_L2ECC_BAD_T         _SB_MAKEMASK(8,S_SCD_L2ECC_BAD_T)
+#define V_SCD_L2ECC_BAD_T(x)      _SB_MAKEVALUE(x,S_SCD_L2ECC_BAD_T)
+#define G_SCD_L2ECC_BAD_T(x)      _SB_GETVALUE(x,S_SCD_L2ECC_BAD_T,M_SCD_L2ECC_BAD_T)
+
+#define S_SCD_MEM_ECC_CORR        0
+#define M_SCD_MEM_ECC_CORR        _SB_MAKEMASK(8,S_SCD_MEM_ECC_CORR)
+#define V_SCD_MEM_ECC_CORR(x)     _SB_MAKEVALUE(x,S_SCD_MEM_ECC_CORR)
+#define G_SCD_MEM_ECC_CORR(x)     _SB_GETVALUE(x,S_SCD_MEM_ECC_CORR,M_SCD_MEM_ECC_CORR)
+
+#define S_SCD_MEM_ECC_BAD         8
+#define M_SCD_MEM_ECC_BAD         _SB_MAKEMASK(8,S_SCD_MEM_ECC_BAD)
+#define V_SCD_MEM_ECC_BAD(x)      _SB_MAKEVALUE(x,S_SCD_MEM_ECC_BAD)
+#define G_SCD_MEM_ECC_BAD(x)      _SB_GETVALUE(x,S_SCD_MEM_ECC_BAD,M_SCD_MEM_ECC_BAD)
+
+#define S_SCD_MEM_BUSERR          16
+#define M_SCD_MEM_BUSERR          _SB_MAKEMASK(8,S_SCD_MEM_BUSERR)
+#define V_SCD_MEM_BUSERR(x)       _SB_MAKEVALUE(x,S_SCD_MEM_BUSERR)
+#define G_SCD_MEM_BUSERR(x)       _SB_GETVALUE(x,S_SCD_MEM_BUSERR,M_SCD_MEM_BUSERR)
+
+
+/*
+ * Address Trap Registers
+ */
+
+#define M_ATRAP_INDEX		  _SB_MAKEMASK(4,0)
+#define M_ATRAP_ADDRESS		  _SB_MAKEMASK(40,0)
+
+#define S_ATRAP_CFG_CNT            0
+#define M_ATRAP_CFG_CNT            _SB_MAKEMASK(3,S_ATRAP_CFG_CNT)
+#define V_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x,S_ATRAP_CFG_CNT)
+#define G_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x,S_ATRAP_CFG_CNT,M_ATRAP_CFG_CNT)
+
+#define M_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
+#define M_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
+#define M_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
+#define M_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
+
+#define S_ATRAP_CFG_AGENTID     8
+#define M_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4,S_ATRAP_CFG_AGENTID)
+#define V_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x,S_ATRAP_CFG_AGENTID)
+#define G_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x,S_ATRAP_CFG_AGENTID,M_ATRAP_CFG_AGENTID)
+
+#define K_BUS_AGENT_CPU0	0
+#define K_BUS_AGENT_CPU1	1
+#define K_BUS_AGENT_IOB0	2
+#define K_BUS_AGENT_IOB1	3
+#define K_BUS_AGENT_SCD	4
+#define K_BUS_AGENT_RESERVED	5
+#define K_BUS_AGENT_L2C	6
+#define K_BUS_AGENT_MC	7
+
+#define S_ATRAP_CFG_CATTR     12
+#define M_ATRAP_CFG_CATTR     _SB_MAKEMASK(3,S_ATRAP_CFG_CATTR)
+#define V_ATRAP_CFG_CATTR(x)  _SB_MAKEVALUE(x,S_ATRAP_CFG_CATTR)
+#define G_ATRAP_CFG_CATTR(x)  _SB_GETVALUE(x,S_ATRAP_CFG_CATTR,M_ATRAP_CFG_CATTR)
+
+#define K_ATRAP_CFG_CATTR_IGNORE	0
+#define K_ATRAP_CFG_CATTR_UNC    	1
+#define K_ATRAP_CFG_CATTR_CACHEABLE	2
+#define K_ATRAP_CFG_CATTR_NONCOH  	3
+#define K_ATRAP_CFG_CATTR_COHERENT	4
+#define K_ATRAP_CFG_CATTR_NOTUNC	5
+#define K_ATRAP_CFG_CATTR_NOTNONCOH	6
+#define K_ATRAP_CFG_CATTR_NOTCOHERENT   7
+
+/*
+ * Trace Buffer Config register
+ */
+
+#define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
+#define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
+#define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)
+#define M_SCD_TRACE_CFG_STOP            _SB_MAKEMASK1(3)
+#define M_SCD_TRACE_CFG_FREEZE          _SB_MAKEMASK1(4)
+#define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
+#define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
+#define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#define S_SCD_TRACE_CFG_CUR_ADDR        10
+#define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8,S_SCD_TRACE_CFG_CUR_ADDR)
+#define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
+#define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
+
+/*
+ * Trace Event registers
+ */
+
+#define S_SCD_TREVT_ADDR_MATCH          0
+#define M_SCD_TREVT_ADDR_MATCH          _SB_MAKEMASK(4,S_SCD_TREVT_ADDR_MATCH)
+#define V_SCD_TREVT_ADDR_MATCH(x)       _SB_MAKEVALUE(x,S_SCD_TREVT_ADDR_MATCH)
+#define G_SCD_TREVT_ADDR_MATCH(x)       _SB_GETVALUE(x,S_SCD_TREVT_ADDR_MATCH,M_SCD_TREVT_ADDR_MATCH)
+
+#define M_SCD_TREVT_REQID_MATCH         _SB_MAKEMASK1(4)
+#define M_SCD_TREVT_DATAID_MATCH        _SB_MAKEMASK1(5)
+#define M_SCD_TREVT_RESPID_MATCH        _SB_MAKEMASK1(6)
+#define M_SCD_TREVT_INTERRUPT           _SB_MAKEMASK1(7)
+#define M_SCD_TREVT_DEBUG_PIN           _SB_MAKEMASK1(9)
+#define M_SCD_TREVT_WRITE               _SB_MAKEMASK1(10)
+#define M_SCD_TREVT_READ                _SB_MAKEMASK1(11)
+
+#define S_SCD_TREVT_REQID               12
+#define M_SCD_TREVT_REQID               _SB_MAKEMASK(4,S_SCD_TREVT_REQID)
+#define V_SCD_TREVT_REQID(x)            _SB_MAKEVALUE(x,S_SCD_TREVT_REQID)
+#define G_SCD_TREVT_REQID(x)            _SB_GETVALUE(x,S_SCD_TREVT_REQID,M_SCD_TREVT_REQID)
+
+#define S_SCD_TREVT_RESPID              16
+#define M_SCD_TREVT_RESPID              _SB_MAKEMASK(4,S_SCD_TREVT_RESPID)
+#define V_SCD_TREVT_RESPID(x)           _SB_MAKEVALUE(x,S_SCD_TREVT_RESPID)
+#define G_SCD_TREVT_RESPID(x)           _SB_GETVALUE(x,S_SCD_TREVT_RESPID,M_SCD_TREVT_RESPID)
+
+#define S_SCD_TREVT_DATAID              20
+#define M_SCD_TREVT_DATAID              _SB_MAKEMASK(4,S_SCD_TREVT_DATAID)
+#define V_SCD_TREVT_DATAID(x)           _SB_MAKEVALUE(x,S_SCD_TREVT_DATAID)
+#define G_SCD_TREVT_DATAID(x)           _SB_GETVALUE(x,S_SCD_TREVT_DATAID,M_SCD_TREVT_DATID)
+
+#define S_SCD_TREVT_COUNT               24
+#define M_SCD_TREVT_COUNT               _SB_MAKEMASK(8,S_SCD_TREVT_COUNT)
+#define V_SCD_TREVT_COUNT(x)            _SB_MAKEVALUE(x,S_SCD_TREVT_COUNT)
+#define G_SCD_TREVT_COUNT(x)            _SB_GETVALUE(x,S_SCD_TREVT_COUNT,M_SCD_TREVT_COUNT)
+
+/*
+ * Trace Sequence registers
+ */
+
+#define S_SCD_TRSEQ_EVENT4              0
+#define M_SCD_TRSEQ_EVENT4              _SB_MAKEMASK(4,S_SCD_TRSEQ_EVENT4)
+#define V_SCD_TRSEQ_EVENT4(x)           _SB_MAKEVALUE(x,S_SCD_TRSEQ_EVENT4)
+#define G_SCD_TRSEQ_EVENT4(x)           _SB_GETVALUE(x,S_SCD_TRSEQ_EVENT4,M_SCD_TRSEQ_EVENT4)
+
+#define S_SCD_TRSEQ_EVENT3              4
+#define M_SCD_TRSEQ_EVENT3              _SB_MAKEMASK(4,S_SCD_TRSEQ_EVENT3)
+#define V_SCD_TRSEQ_EVENT3(x)           _SB_MAKEVALUE(x,S_SCD_TRSEQ_EVENT3)
+#define G_SCD_TRSEQ_EVENT3(x)           _SB_GETVALUE(x,S_SCD_TRSEQ_EVENT3,M_SCD_TRSEQ_EVENT3)
+
+#define S_SCD_TRSEQ_EVENT2              8
+#define M_SCD_TRSEQ_EVENT2              _SB_MAKEMASK(4,S_SCD_TRSEQ_EVENT2)
+#define V_SCD_TRSEQ_EVENT2(x)           _SB_MAKEVALUE(x,S_SCD_TRSEQ_EVENT2)
+#define G_SCD_TRSEQ_EVENT2(x)           _SB_GETVALUE(x,S_SCD_TRSEQ_EVENT2,M_SCD_TRSEQ_EVENT2)
+
+#define S_SCD_TRSEQ_EVENT1              12
+#define M_SCD_TRSEQ_EVENT1              _SB_MAKEMASK(4,S_SCD_TRSEQ_EVENT1)
+#define V_SCD_TRSEQ_EVENT1(x)           _SB_MAKEVALUE(x,S_SCD_TRSEQ_EVENT1)
+#define G_SCD_TRSEQ_EVENT1(x)           _SB_GETVALUE(x,S_SCD_TRSEQ_EVENT1,M_SCD_TRSEQ_EVENT1)
+
+#define K_SCD_TRSEQ_E0                  0
+#define K_SCD_TRSEQ_E1                  1
+#define K_SCD_TRSEQ_E2                  2
+#define K_SCD_TRSEQ_E3                  3
+#define K_SCD_TRSEQ_E0_E1               4
+#define K_SCD_TRSEQ_E1_E2               5
+#define K_SCD_TRSEQ_E2_E3               6
+#define K_SCD_TRSEQ_E0_E1_E2            7
+#define K_SCD_TRSEQ_E0_E1_E2_E3         8
+#define K_SCD_TRSEQ_E0E1                9
+#define K_SCD_TRSEQ_E0E1E2              10
+#define K_SCD_TRSEQ_E0E1E2E3            11
+#define K_SCD_TRSEQ_E0E1_E2             12
+#define K_SCD_TRSEQ_E0E1_E2E3           13
+#define K_SCD_TRSEQ_E0E1_E2_E3          14
+#define K_SCD_TRSEQ_IGNORED             15
+
+#define K_SCD_TRSEQ_TRIGGER_ALL         (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
+
+#define S_SCD_TRSEQ_FUNCTION            16
+#define M_SCD_TRSEQ_FUNCTION            _SB_MAKEMASK(4,S_SCD_TRSEQ_FUNCTION)
+#define V_SCD_TRSEQ_FUNCTION(x)         _SB_MAKEVALUE(x,S_SCD_TRSEQ_FUNCTION)
+#define G_SCD_TRSEQ_FUNCTION(x)         _SB_GETVALUE(x,S_SCD_TRSEQ_FUNCTION,M_SCD_TRSEQ_FUNCTION)
+
+#define K_SCD_TRSEQ_FUNC_NOP            0
+#define K_SCD_TRSEQ_FUNC_START          1
+#define K_SCD_TRSEQ_FUNC_STOP           2
+#define K_SCD_TRSEQ_FUNC_FREEZE         3
+
+#define V_SCD_TRSEQ_FUNC_NOP            V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
+#define V_SCD_TRSEQ_FUNC_START          V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
+#define V_SCD_TRSEQ_FUNC_STOP           V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
+#define V_SCD_TRSEQ_FUNC_FREEZE         V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
+
+#define M_SCD_TRSEQ_ASAMPLE             _SB_MAKEMASK1(18)
+#define M_SCD_TRSEQ_DSAMPLE             _SB_MAKEMASK1(19)
+#define M_SCD_TRSEQ_DEBUGPIN            _SB_MAKEMASK1(20)
+#define M_SCD_TRSEQ_DEBUGCPU            _SB_MAKEMASK1(21)
+#define M_SCD_TRSEQ_CLEARUSE            _SB_MAKEMASK1(22)
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h
new file mode 100644
index 000000000000..287cbfe9efa2
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_smbus.h
@@ -0,0 +1,170 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  SMBUS Constants                          File: sb1250_smbus.h
+    *  
+    *  This module contains constants and macros useful for 
+    *  manipulating the SB1250's SMbus devices.
+    *  
+    *  SB1250 specification level:  01/02/2002
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SMBUS_H
+#define _SB1250_SMBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * SMBus Clock Frequency Register (Table 14-2)
+ */
+
+#define S_SMB_FREQ_DIV              0
+#define M_SMB_FREQ_DIV              _SB_MAKEMASK(13,S_SMB_FREQ_DIV)
+#define V_SMB_FREQ_DIV(x)           _SB_MAKEVALUE(x,S_SMB_FREQ_DIV)
+
+#define K_SMB_FREQ_400KHZ	    0x1F
+#define K_SMB_FREQ_100KHZ	    0x7D
+
+#define S_SMB_CMD                   0
+#define M_SMB_CMD                   _SB_MAKEMASK(8,S_SMB_CMD)
+#define V_SMB_CMD(x)                _SB_MAKEVALUE(x,S_SMB_CMD)
+
+/*
+ * SMBus control register (Table 14-4)
+ */
+
+#define M_SMB_ERR_INTR              _SB_MAKEMASK1(0)
+#define M_SMB_FINISH_INTR           _SB_MAKEMASK1(1)
+#define M_SMB_DATA_OUT              _SB_MAKEMASK1(4)
+#define M_SMB_DATA_DIR              _SB_MAKEMASK1(5)
+#define M_SMB_DATA_DIR_OUTPUT       M_SMB_DATA_DIR
+#define M_SMB_CLK_OUT               _SB_MAKEMASK1(6)
+#define M_SMB_DIRECT_ENABLE         _SB_MAKEMASK1(7)
+
+/*
+ * SMBus status registers (Table 14-5)
+ */
+
+#define M_SMB_BUSY                  _SB_MAKEMASK1(0)
+#define M_SMB_ERROR                 _SB_MAKEMASK1(1)
+#define M_SMB_ERROR_TYPE            _SB_MAKEMASK1(2)
+#define M_SMB_REF                   _SB_MAKEMASK1(6)
+#define M_SMB_DATA_IN               _SB_MAKEMASK1(7)
+
+/*
+ * SMBus Start/Command registers (Table 14-9)
+ */
+
+#define S_SMB_ADDR                  0
+#define M_SMB_ADDR                  _SB_MAKEMASK(7,S_SMB_ADDR)
+#define V_SMB_ADDR(x)               _SB_MAKEVALUE(x,S_SMB_ADDR)
+#define G_SMB_ADDR(x)               _SB_GETVALUE(x,S_SMB_ADDR,M_SMB_ADDR)
+
+#define M_SMB_QDATA                 _SB_MAKEMASK1(7)
+
+#define S_SMB_TT                    8
+#define M_SMB_TT                    _SB_MAKEMASK(3,S_SMB_TT)
+#define V_SMB_TT(x)                 _SB_MAKEVALUE(x,S_SMB_TT)
+#define G_SMB_TT(x)                 _SB_GETVALUE(x,S_SMB_TT,M_SMB_TT)
+
+#define K_SMB_TT_WR1BYTE            0
+#define K_SMB_TT_WR2BYTE            1
+#define K_SMB_TT_WR3BYTE            2
+#define K_SMB_TT_CMD_RD1BYTE        3
+#define K_SMB_TT_CMD_RD2BYTE        4
+#define K_SMB_TT_RD1BYTE            5
+#define K_SMB_TT_QUICKCMD           6
+#define K_SMB_TT_EEPROMREAD         7
+
+#define V_SMB_TT_WR1BYTE	    V_SMB_TT(K_SMB_TT_WR1BYTE)
+#define V_SMB_TT_WR2BYTE	    V_SMB_TT(K_SMB_TT_WR2BYTE)
+#define V_SMB_TT_WR3BYTE	    V_SMB_TT(K_SMB_TT_WR3BYTE)
+#define V_SMB_TT_CMD_RD1BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD1BYTE)
+#define V_SMB_TT_CMD_RD2BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD2BYTE)
+#define V_SMB_TT_RD1BYTE	    V_SMB_TT(K_SMB_TT_RD1BYTE)
+#define V_SMB_TT_QUICKCMD	    V_SMB_TT(K_SMB_TT_QUICKCMD)
+#define V_SMB_TT_EEPROMREAD	    V_SMB_TT(K_SMB_TT_EEPROMREAD)
+
+#define M_SMB_PEC                   _SB_MAKEMASK1(15)
+
+/*
+ * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7)
+ */
+
+#define S_SMB_LB                    0
+#define M_SMB_LB                    _SB_MAKEMASK(8,S_SMB_LB)
+#define V_SMB_LB(x)                 _SB_MAKEVALUE(x,S_SMB_LB)
+
+#define S_SMB_MB                    8
+#define M_SMB_MB                    _SB_MAKEMASK(8,S_SMB_MB)
+#define V_SMB_MB(x)                 _SB_MAKEVALUE(x,S_SMB_MB)
+
+
+/*
+ * SMBus Packet Error Check register (Table 14-8)
+ */
+
+#define S_SPEC_PEC                  0
+#define M_SPEC_PEC                  _SB_MAKEMASK(8,S_SPEC_PEC)
+#define V_SPEC_MB(x)                _SB_MAKEVALUE(x,S_SPEC_PEC)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+
+#define S_SMB_CMDH                  8
+#define M_SMB_CMDH                  _SB_MAKEMASK(8,S_SMBH_CMD)
+#define V_SMB_CMDH(x)               _SB_MAKEVALUE(x,S_SMBH_CMD)
+
+#define M_SMB_EXTEND		    _SB_MAKEMASK1(14)
+
+#define M_SMB_DIR		    _SB_MAKEMASK1(13)
+
+#define S_SMB_DFMT                  8
+#define M_SMB_DFMT                  _SB_MAKEMASK(3,S_SMB_DFMT)
+#define V_SMB_DFMT(x)               _SB_MAKEVALUE(x,S_SMB_DFMT)
+#define G_SMB_DFMT(x)               _SB_GETVALUE(x,S_SMB_DFMT,M_SMB_DFMT)
+
+#define K_SMB_DFMT_1BYTE            0
+#define K_SMB_DFMT_2BYTE            1
+#define K_SMB_DFMT_3BYTE            2
+#define K_SMB_DFMT_4BYTE            3
+#define K_SMB_DFMT_NODATA           4
+#define K_SMB_DFMT_CMD4BYTE         5
+#define K_SMB_DFMT_CMD5BYTE         6
+#define K_SMB_DFMT_RESERVED         7
+
+#define V_SMB_DFMT_1BYTE	    V_SMB_DFMT(K_SMB_DFMT_1BYTE)
+#define V_SMB_DFMT_2BYTE	    V_SMB_DFMT(K_SMB_DFMT_2BYTE)
+#define V_SMB_DFMT_3BYTE	    V_SMB_DFMT(K_SMB_DFMT_3BYTE)
+#define V_SMB_DFMT_4BYTE	    V_SMB_DFMT(K_SMB_DFMT_4BYTE)
+#define V_SMB_DFMT_NODATA	    V_SMB_DFMT(K_SMB_DFMT_NODATA)
+#define V_SMB_DFMT_CMD4BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE)
+#define V_SMB_DFMT_CMD5BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
+#define V_SMB_DFMT_RESERVED	    V_SMB_DFMT(K_SMB_DFMT_RESERVED)
+
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h
new file mode 100644
index 000000000000..8d5e8edd3c4b
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_syncser.h
@@ -0,0 +1,148 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Synchronous Serial Constants              File: sb1250_syncser.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's Synchronous Serial
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SYNCSER_H
+#define _SB1250_SYNCSER_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Serial Mode Configuration Register
+ */
+
+#define M_SYNCSER_CRC_MODE                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_MSB_FIRST                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_FLAG_NUM                 2
+#define M_SYNCSER_FLAG_NUM                 _SB_MAKEMASK(4,S_SYNCSER_FLAG_NUM)
+#define V_SYNCSER_FLAG_NUM                 _SB_MAKEVALUE(x,S_SYNCSER_FLAG_NUM)
+
+#define M_SYNCSER_FLAG_EN                  _SB_MAKEMASK1(6)
+#define M_SYNCSER_HDLC_EN                  _SB_MAKEMASK1(7)
+#define M_SYNCSER_LOOP_MODE                _SB_MAKEMASK1(8)
+#define M_SYNCSER_LOOPBACK                 _SB_MAKEMASK1(9)
+
+/*
+ * Serial Clock Source and Line Interface Mode Register
+ */
+
+#define M_SYNCSER_RXCLK_INV                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RXCLK_EXT                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_RXSYNC_DLY               2
+#define M_SYNCSER_RXSYNC_DLY               _SB_MAKEMASK(2,S_SYNCSER_RXSYNC_DLY)
+#define V_SYNCSER_RXSYNC_DLY(x)            _SB_MAKEVALUE(x,S_SYNCSER_RXSYNC_DLY)
+
+#define M_SYNCSER_RXSYNC_LOW               _SB_MAKEMASK1(4)
+#define M_SYNCSER_RXSTRB_LOW               _SB_MAKEMASK1(5)
+
+#define M_SYNCSER_RXSYNC_EDGE              _SB_MAKEMASK1(6)
+#define M_SYNCSER_RXSYNC_INT               _SB_MAKEMASK1(7)
+
+#define M_SYNCSER_TXCLK_INV                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TXCLK_EXT                _SB_MAKEMASK1(9)
+
+#define S_SYNCSER_TXSYNC_DLY               10
+#define M_SYNCSER_TXSYNC_DLY               _SB_MAKEMASK(2,S_SYNCSER_TXSYNC_DLY)
+#define V_SYNCSER_TXSYNC_DLY(x)            _SB_MAKEVALUE(x,S_SYNCSER_TXSYNC_DLY)
+
+#define M_SYNCSER_TXSYNC_LOW               _SB_MAKEMASK1(12)
+#define M_SYNCSER_TXSTRB_LOW               _SB_MAKEMASK1(13)
+
+#define M_SYNCSER_TXSYNC_EDGE              _SB_MAKEMASK1(14)
+#define M_SYNCSER_TXSYNC_INT               _SB_MAKEMASK1(15)
+
+/*
+ * Serial Command Register
+ */
+
+#define M_SYNCSER_CMD_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_CMD_TX_EN                _SB_MAKEMASK1(1)
+#define M_SYNCSER_CMD_RX_RESET             _SB_MAKEMASK1(2)
+#define M_SYNCSER_CMD_TX_RESET             _SB_MAKEMASK1(3)
+#define M_SYNCSER_CMD_TX_PAUSE             _SB_MAKEMASK1(5)
+
+/*
+ * Serial DMA Enable Register
+ */
+
+#define M_SYNCSER_DMA_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_DMA_TX_EN                _SB_MAKEMASK1(4)
+
+/*
+ * Serial Status Register
+ */
+
+#define M_SYNCSER_RX_CRCERR                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RX_ABORT                 _SB_MAKEMASK1(1)
+#define M_SYNCSER_RX_OCTET                 _SB_MAKEMASK1(2)
+#define M_SYNCSER_RX_LONGFRM               _SB_MAKEMASK1(3)
+#define M_SYNCSER_RX_SHORTFRM              _SB_MAKEMASK1(4)
+#define M_SYNCSER_RX_OVERRUN               _SB_MAKEMASK1(5)
+#define M_SYNCSER_RX_SYNC_ERR              _SB_MAKEMASK1(6)
+#define M_SYNCSER_TX_CRCERR                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TX_UNDERRUN              _SB_MAKEMASK1(9)
+#define M_SYNCSER_TX_SYNC_ERR              _SB_MAKEMASK1(10)
+#define M_SYNCSER_TX_PAUSE_COMPLETE        _SB_MAKEMASK1(11)
+#define M_SYNCSER_RX_EOP_COUNT             _SB_MAKEMASK1(16)
+#define M_SYNCSER_RX_EOP_TIMER             _SB_MAKEMASK1(17)
+#define M_SYNCSER_RX_EOP_SEEN              _SB_MAKEMASK1(18)
+#define M_SYNCSER_RX_HWM                   _SB_MAKEMASK1(19)
+#define M_SYNCSER_RX_LWM                   _SB_MAKEMASK1(20)
+#define M_SYNCSER_RX_DSCR                  _SB_MAKEMASK1(21)
+#define M_SYNCSER_RX_DERR                  _SB_MAKEMASK1(22)
+#define M_SYNCSER_TX_EOP_COUNT             _SB_MAKEMASK1(24)
+#define M_SYNCSER_TX_EOP_TIMER             _SB_MAKEMASK1(25)
+#define M_SYNCSER_TX_EOP_SEEN              _SB_MAKEMASK1(26)
+#define M_SYNCSER_TX_HWM                   _SB_MAKEMASK1(27)
+#define M_SYNCSER_TX_LWM                   _SB_MAKEMASK1(28)
+#define M_SYNCSER_TX_DSCR                  _SB_MAKEMASK1(29)
+#define M_SYNCSER_TX_DERR                  _SB_MAKEMASK1(30)
+#define M_SYNCSER_TX_DZERO                 _SB_MAKEMASK1(31)
+
+/*
+ * Sequencer Table Entry format
+ */
+
+#define M_SYNCSER_SEQ_LAST                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_SEQ_BYTE                 _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_SEQ_COUNT                2
+#define M_SYNCSER_SEQ_COUNT                _SB_MAKEMASK(4,S_SYNCSER_SEQ_COUNT)
+#define V_SYNCSER_SEQ_COUNT(x)             _SB_MAKEVALUE(x,S_SYNCSER_SEQ_COUNT)
+
+#define M_SYNCSER_SEQ_ENABLE               _SB_MAKEMASK1(6)
+#define M_SYNCSER_SEQ_STROBE               _SB_MAKEMASK1(7)
+
+#endif
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h
new file mode 100644
index 000000000000..7655d6945cca
--- /dev/null
+++ b/include/asm-mips/sibyte/sb1250_uart.h
@@ -0,0 +1,354 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  UART Constants				File: sb1250_uart.h
+    *  
+    *  This module contains constants and macros useful for 
+    *  manipulating the SB1250's UARTs
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_UART_H
+#define _SB1250_UART_H
+
+#include "sb1250_defs.h"
+
+/* ********************************************************************** 
+   * DUART Registers
+   ********************************************************************** */
+
+/*
+ * DUART Mode Register #1 (Table 10-3)
+ * Register: DUART_MODE_REG_1_A
+ * Register: DUART_MODE_REG_1_B
+ */
+
+#define S_DUART_BITS_PER_CHAR       0
+#define M_DUART_BITS_PER_CHAR       _SB_MAKEMASK(2,S_DUART_BITS_PER_CHAR)
+#define V_DUART_BITS_PER_CHAR(x)    _SB_MAKEVALUE(x,S_DUART_BITS_PER_CHAR)
+
+#define K_DUART_BITS_PER_CHAR_RSV0  0
+#define K_DUART_BITS_PER_CHAR_RSV1  1
+#define K_DUART_BITS_PER_CHAR_7     2
+#define K_DUART_BITS_PER_CHAR_8     3
+
+#define V_DUART_BITS_PER_CHAR_RSV0  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
+#define V_DUART_BITS_PER_CHAR_RSV1  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
+#define V_DUART_BITS_PER_CHAR_7     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+
+
+#define M_DUART_PARITY_TYPE_EVEN    0x00
+#define M_DUART_PARITY_TYPE_ODD     _SB_MAKEMASK1(2)
+
+#define S_DUART_PARITY_MODE          3
+#define M_DUART_PARITY_MODE         _SB_MAKEMASK(2,S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x)      _SB_MAKEVALUE(x,S_DUART_PARITY_MODE)
+
+#define K_DUART_PARITY_MODE_ADD       0
+#define K_DUART_PARITY_MODE_ADD_FIXED 1
+#define K_DUART_PARITY_MODE_NONE      2
+
+#define V_DUART_PARITY_MODE_ADD       V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
+#define V_DUART_PARITY_MODE_NONE      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
+
+#define M_DUART_ERR_MODE            _SB_MAKEMASK1(5)    /* must be zero */
+
+#define M_DUART_RX_IRQ_SEL_RXRDY    0
+#define M_DUART_RX_IRQ_SEL_RXFULL   _SB_MAKEMASK1(6)
+
+#define M_DUART_RX_RTS_ENA          _SB_MAKEMASK1(7)
+
+/*
+ * DUART Mode Register #2 (Table 10-4)
+ * Register: DUART_MODE_REG_2_A
+ * Register: DUART_MODE_REG_2_B
+ */
+
+#define M_DUART_MODE_RESERVED1      _SB_MAKEMASK(3,0)   /* ignored */
+
+#define M_DUART_STOP_BIT_LEN_2      _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1      0
+
+#define M_DUART_TX_CTS_ENA          _SB_MAKEMASK1(4)
+
+
+#define M_DUART_MODE_RESERVED2      _SB_MAKEMASK1(5)    /* must be zero */
+
+#define S_DUART_CHAN_MODE	    6
+#define M_DUART_CHAN_MODE           _SB_MAKEMASK(2,S_DUART_CHAN_MODE)
+#define V_DUART_CHAN_MODE(x)	    _SB_MAKEVALUE(x,S_DUART_CHAN_MODE)
+
+#define K_DUART_CHAN_MODE_NORMAL    0
+#define K_DUART_CHAN_MODE_LCL_LOOP  2
+#define K_DUART_CHAN_MODE_REM_LOOP  3
+
+#define V_DUART_CHAN_MODE_NORMAL    V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL)
+#define V_DUART_CHAN_MODE_LCL_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP)
+#define V_DUART_CHAN_MODE_REM_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP)
+
+/*
+ * DUART Command Register (Table 10-5)
+ * Register: DUART_CMD_A
+ * Register: DUART_CMD_B
+ */
+
+#define M_DUART_RX_EN               _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS              _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN               _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS              _SB_MAKEMASK1(3)
+
+#define S_DUART_MISC_CMD	    4
+#define M_DUART_MISC_CMD            _SB_MAKEMASK(3,S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x)         _SB_MAKEVALUE(x,S_DUART_MISC_CMD)
+
+#define K_DUART_MISC_CMD_NOACTION0       0
+#define K_DUART_MISC_CMD_NOACTION1       1
+#define K_DUART_MISC_CMD_RESET_RX        2
+#define K_DUART_MISC_CMD_RESET_TX        3
+#define K_DUART_MISC_CMD_NOACTION4       4
+#define K_DUART_MISC_CMD_RESET_BREAK_INT 5
+#define K_DUART_MISC_CMD_START_BREAK     6
+#define K_DUART_MISC_CMD_STOP_BREAK      7
+
+#define V_DUART_MISC_CMD_NOACTION0       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
+#define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+
+#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7) 
+
+/*
+ * DUART Status Register (Table 10-6)
+ * Register: DUART_STATUS_A
+ * Register: DUART_STATUS_B
+ * READ-ONLY
+ */
+
+#define M_DUART_RX_RDY              _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL             _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY              _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT              _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR           _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR          _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR             _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Baud Rate Register (Table 10-7)
+ * Register: DUART_CLK_SEL_A 
+ * Register: DUART_CLK_SEL_B
+ */
+
+#define M_DUART_CLK_COUNTER         _SB_MAKEMASK(12,0)
+#define V_DUART_BAUD_RATE(x)        (100000000/((x)*20)-1)
+
+/*
+ * DUART Data Registers (Table 10-8 and 10-9)
+ * Register: DUART_RX_HOLD_A
+ * Register: DUART_RX_HOLD_B
+ * Register: DUART_TX_HOLD_A
+ * Register: DUART_TX_HOLD_B
+ */
+
+#define M_DUART_RX_DATA             _SB_MAKEMASK(8,0)
+#define M_DUART_TX_DATA             _SB_MAKEMASK(8,0)
+
+/*
+ * DUART Input Port Register (Table 10-10)
+ * Register: DUART_IN_PORT
+ */
+
+#define M_DUART_IN_PIN0_VAL         _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL         _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL         _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL         _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL         _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL         _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN            _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
+ * Register: DUART_INPORT_CHNG
+ */
+
+#define S_DUART_IN_PIN_VAL          0
+#define M_DUART_IN_PIN_VAL          _SB_MAKEMASK(4,S_DUART_IN_PIN_VAL)
+
+#define S_DUART_IN_PIN_CHNG         4
+#define M_DUART_IN_PIN_CHNG         _SB_MAKEMASK(4,S_DUART_IN_PIN_CHNG)
+
+
+/*
+ * DUART Output port control register (Table 10-14)
+ * Register: DUART_OPCR
+ */
+
+#define M_DUART_OPCR_RESERVED0      _SB_MAKEMASK1(0)   /* must be zero */
+#define M_DUART_OPC2_SEL            _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1      _SB_MAKEMASK1(2)   /* must be zero */
+#define M_DUART_OPC3_SEL            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2      _SB_MAKEMASK(4,4)  /* must be zero */
+
+/*
+ * DUART Aux Control Register (Table 10-15)
+ * Register: DUART_AUX_CTRL
+ */
+
+#define M_DUART_IP0_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA        _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA        _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA        _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED        _SB_MAKEMASK(4,4)
+
+#define M_DUART_CTS_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA        _SB_MAKEMASK1(2)
+
+/*
+ * DUART Interrupt Status Register (Table 10-16)
+ * Register: DUART_ISR
+ */
+
+#define M_DUART_ISR_TX_A            _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX_A            _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_ISR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Channel A Interrupt Status Register (Table 10-17)
+ * DUART Channel B Interrupt Status Register (Table 10-18)
+ * Register: DUART_ISR_A
+ * Register: DUART_ISR_B
+ */
+
+#define M_DUART_ISR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_ISR_RESERVED        _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Interrupt Mask Register (Table 10-19)
+ * Register: DUART_IMR
+ */
+
+#define M_DUART_IMR_TX_A            _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A            _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL_A	    _SB_MAKEMASK(4,0)
+
+#define M_DUART_IMR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B           _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Channel A Interrupt Mask Register (Table 10-20)
+ * DUART Channel B Interrupt Mask Register (Table 10-21)
+ * Register: DUART_IMR_A
+ * Register: DUART_IMR_B
+ */
+
+#define M_DUART_IMR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL		    _SB_MAKEMASK(4,0)
+#define M_DUART_IMR_RESERVED        _SB_MAKEMASK(4,4)
+
+
+/*
+ * DUART Output Port Set Register (Table 10-22)
+ * Register: DUART_SET_OPR
+ */
+
+#define M_DUART_SET_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED       _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Output Port Clear Register (Table 10-23)
+ * Register: DUART_CLEAR_OPR
+ */
+
+#define M_DUART_CLR_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED       _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Output Port RTS Register (Table 10-24)
+ * Register: DUART_OUT_PORT
+ */
+
+#define M_DUART_OUT_PIN_SET0        _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1        _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0        _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1        _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED       _SB_MAKEMASK(4,4)
+
+#define M_DUART_OUT_PIN_SET(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
+#define M_DUART_OUT_PIN_CLR(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/* 
+ * Full Interrupt Control Register
+ */
+
+#define S_DUART_SIG_FULL           _SB_MAKE64(0)
+#define M_DUART_SIG_FULL           _SB_MAKEMASK(4,S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x)        _SB_MAKEVALUE(x,S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x)        _SB_GETVALUE(x,S_DUART_SIG_FULL,M_DUART_SIG_FULL)
+
+#define S_DUART_INT_TIME           _SB_MAKE64(4)
+#define M_DUART_INT_TIME           _SB_MAKEMASK(4,S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x)        _SB_MAKEVALUE(x,S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x)        _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/* ********************************************************************** */
+
+
+#endif
diff --git a/include/asm-mips/sibyte/sentosa.h b/include/asm-mips/sibyte/sentosa.h
new file mode 100644
index 000000000000..824605847af4
--- /dev/null
+++ b/include/asm-mips/sibyte/sentosa.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SENTOSA_H
+#define __ASM_SIBYTE_SENTOSA_H
+
+#include <linux/config.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SENTOSA
+#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)"
+#endif
+#ifdef CONFIG_SIBYTE_RHONE
+#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)"
+#endif
+
+/* Generic bus chip selects */
+#ifdef CONFIG_SIBYTE_RHONE
+#define LEDS_CS         6
+#define LEDS_PHYS       0x1d0a0000
+#endif
+
+/* GPIOs */
+#define K_GPIO_DBG_LED  0
+
+#endif /* __ASM_SIBYTE_SENTOSA_H */
diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h
new file mode 100644
index 000000000000..97fa0494c30c
--- /dev/null
+++ b/include/asm-mips/sibyte/swarm.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SWARM_H
+#define __ASM_SIBYTE_SWARM_H
+
+#include <linux/config.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SWARM
+#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+#ifdef CONFIG_SIBYTE_PTSWARM
+#define SIBYTE_BOARD_NAME "PTSWARM"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
+#ifdef CONFIG_SIBYTE_LITTLESUR
+#define SIBYTE_BOARD_NAME "BCM1250C2 (LittleSur)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "cfe0"
+#endif
+#ifdef CONFIG_SIBYTE_CRHONE
+#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+#ifdef CONFIG_SIBYTE_CRHINE
+#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
+#define K_GPIO_GB_IDE   4
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_SWARM_H */
diff --git a/include/asm-mips/sibyte/trace_prof.h b/include/asm-mips/sibyte/trace_prof.h
new file mode 100644
index 000000000000..557792075e9a
--- /dev/null
+++ b/include/asm-mips/sibyte/trace_prof.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_SIBYTE_TRACE_PROF_H
+#define __ASM_SIBYTE_TRACE_PROF_H
+
+#undef DBG
+#if SBPROF_TB_DEBUG
+#define DBG(a) a
+#else
+#define DBG(a)
+#endif
+
+#define SBPROF_TB_MAJOR 240
+#define DEVNAME "bcm1250_tbprof"
+
+typedef u_int64_t tb_sample_t[6*256];
+
+struct sbprof_tb {
+	int          open;
+	tb_sample_t *sbprof_tbbuf;
+	int          next_tb_sample;
+
+	volatile int tb_enable;
+	volatile int tb_armed;
+
+	wait_queue_head_t tb_sync;
+	wait_queue_head_t tb_read;
+};
+
+#define MAX_SAMPLE_BYTES (24*1024*1024)
+#define MAX_TBSAMPLE_BYTES (12*1024*1024)
+
+#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
+#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
+#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
+
+/* IOCTLs */
+#define SBPROF_ZBSTART		_IOW('s', 0, int)
+#define SBPROF_ZBSTOP		_IOW('s', 1, int)
+#define SBPROF_ZBWAITFULL	_IOW('s', 2, int)
+
+/***************************************************************************
+ * Routines for gathering ZBbus profiles using trace buffer
+ ***************************************************************************/
+
+/* Requires: Already called zclk_timer_init with a value that won't
+	     saturate 40 bits.  No subsequent use of SCD performance counters
+	     or trace buffer.
+   Effect:   Starts gathering random ZBbus profiles using trace buffer. */
+extern int sbprof_zbprof_start(struct file *filp);
+
+/* Effect: Stops collection of ZBbus profiles */
+extern int sbprof_zbprof_stop(void);
+
+
+/***************************************************************************
+ * Routines for using 40-bit SCD cycle counter
+ *
+ * Client responsible for either handling interrupts or making sure
+ * the cycles counter never saturates, e.g., by doing
+ * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
+ ***************************************************************************/
+
+/* Configures SCD counter 0 to count ZCLKs starting from val;
+   Configures SCD counters1,2,3 to count nothing.
+   Must not be called while gathering ZBbus profiles.
+
+unsigned long long val; */
+#define zclk_timer_init(val) \
+  __asm__ __volatile__ (".set push;" \
+			".set mips64;" \
+			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+			"sd   %0, 0x10($8);"   /* write val to counter0 */ \
+			"sd   %1, 0($8);"      /* config counter0 for zclks*/ \
+			".set pop" \
+			: /* no outputs */ \
+						     /* enable, counter0 */ \
+			: /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
+			: /* modifies */ "$8" )
+
+
+/* Reads SCD counter 0 and puts result in value
+   unsigned long long val; */
+#define zclk_get(val) \
+  __asm__ __volatile__ (".set push;" \
+			".set mips64;" \
+			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+			"ld   %0, 0x10($8);"   /* write val to counter0 */ \
+			".set pop" \
+			: /* outputs */ "=r"(val) \
+			: /* inputs */ \
+			: /* modifies */ "$8" )
+
+#endif /* __ASM_SIBYTE_TRACE_PROF_H */
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
new file mode 100644
index 000000000000..18939e84b6f2
--- /dev/null
+++ b/include/asm-mips/sigcontext.h
@@ -0,0 +1,93 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/sgidefs.h>
+                                                                                
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ */
+struct sigcontext {
+	unsigned int		sc_regmask;	/* Unused */
+	unsigned int		sc_status;
+	unsigned long long	sc_pc;
+	unsigned long long	sc_regs[32];
+	unsigned long long	sc_fpregs[32];
+	unsigned int		sc_ownedfp;	/* Unused */
+	unsigned int		sc_fpc_csr;
+	unsigned int		sc_fpc_eir;	/* Unused */
+	unsigned int		sc_used_math;
+	unsigned int		sc_ssflags;	/* Unused */
+	unsigned long long	sc_mdhi;
+	unsigned long long	sc_mdlo;
+
+	unsigned int		sc_cause;	/* Unused */
+	unsigned int		sc_badvaddr;	/* Unused */
+
+	unsigned long		sc_sigset[4];	/* kernel's sigset_t */
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+                                                                                
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ *
+ * Warning: this structure illdefined with sc_badvaddr being just an unsigned
+ * int so it was changed to unsigned long in 2.6.0-test1.  This may break
+ * binary compatibility - no prisoners.
+ */
+struct sigcontext {
+	unsigned long	sc_regs[32];
+	unsigned long	sc_fpregs[32];
+	unsigned long	sc_mdhi;
+	unsigned long	sc_mdlo;
+	unsigned long	sc_pc;
+	unsigned long	sc_badvaddr;
+	unsigned int	sc_status;
+	unsigned int	sc_fpc_csr;
+	unsigned int	sc_fpc_eir;
+	unsigned int	sc_used_math;
+	unsigned int	sc_cause;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/posix_types.h>
+
+struct sigcontext32 {
+	__u32	sc_regmask;		/* Unused */
+	__u32	sc_status;
+	__u64	sc_pc;
+	__u64	sc_regs[32];
+	__u64	sc_fpregs[32];
+	__u32	sc_ownedfp;		/* Unused */
+	__u32	sc_fpc_csr;
+	__u32	sc_fpc_eir;		/* Unused */
+	__u32	sc_used_math;
+	__u32	sc_ssflags;		/* Unused */
+	__u64	sc_mdhi;
+	__u64	sc_mdlo;
+
+	__u32	sc_cause;		/* Unused */
+	__u32	sc_badvaddr;		/* Unused */
+
+	__u32	sc_sigset[4];		/* kernel's sigset_t */
+};
+#endif /* __KERNEL__ */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/include/asm-mips/siginfo.h b/include/asm-mips/siginfo.h
new file mode 100644
index 000000000000..8ddd3c99bcf7
--- /dev/null
+++ b/include/asm-mips/siginfo.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+#include <linux/config.h>
+
+#define SIGEV_HEAD_SIZE	(sizeof(long) + 2*sizeof(int))
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE-SIGEV_HEAD_SIZE) / sizeof(int))
+#undef __ARCH_SI_TRAPNO	/* exception code needs to fill this ...  */
+
+#define HAVE_ARCH_SIGINFO_T
+
+/*
+ * We duplicate the generic versions - <asm-generic/siginfo.h> is just borked
+ * by design ...
+ */
+#define HAVE_ARCH_COPY_SIGINFO
+struct siginfo;
+
+/*
+ * Careful to keep union _sifields from shifting ...
+ */
+#ifdef CONFIG_MIPS32
+#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
+#endif
+#ifdef CONFIG_MIPS64
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+	int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3];
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			clock_t _utime;
+			int _status;		/* exit code */
+			clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+/*
+ * si_code values
+ * Again these have been choosen to be IRIX compatible.
+ */
+#undef SI_ASYNCIO
+#undef SI_TIMER
+#undef SI_MESGQ
+#define SI_ASYNCIO	-2	/* sent by AIO completion */
+#define SI_TIMER __SI_CODE(__SI_TIMER,-3) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ,-4) /* sent by real time mesq state change */
+
+#ifdef __KERNEL__
+
+/*
+ * Duplicated here because of <asm-generic/siginfo.h> braindamage ...
+ */
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+#endif /* _ASM_SIGINFO_H */
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
new file mode 100644
index 000000000000..994987db61be
--- /dev/null
+++ b/include/asm-mips/signal.h
@@ -0,0 +1,178 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#define _NSIG		128
+#define _NSIG_BPW	(sizeof(unsigned long) * 8)
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+#define SIGHUP		 1	/* Hangup (POSIX).  */
+#define SIGINT		 2	/* Interrupt (ANSI).  */
+#define SIGQUIT		 3	/* Quit (POSIX).  */
+#define SIGILL		 4	/* Illegal instruction (ANSI).  */
+#define SIGTRAP		 5	/* Trace trap (POSIX).  */
+#define SIGIOT		 6	/* IOT trap (4.2 BSD).  */
+#define SIGABRT		 SIGIOT	/* Abort (ANSI).  */
+#define SIGEMT		 7
+#define SIGFPE		 8	/* Floating-point exception (ANSI).  */
+#define SIGKILL		 9	/* Kill, unblockable (POSIX).  */
+#define SIGBUS		10	/* BUS error (4.2 BSD).  */
+#define SIGSEGV		11	/* Segmentation violation (ANSI).  */
+#define SIGSYS		12
+#define SIGPIPE		13	/* Broken pipe (POSIX).  */
+#define SIGALRM		14	/* Alarm clock (POSIX).  */
+#define SIGTERM		15	/* Termination (ANSI).  */
+#define SIGUSR1		16	/* User-defined signal 1 (POSIX).  */
+#define SIGUSR2		17	/* User-defined signal 2 (POSIX).  */
+#define SIGCHLD		18	/* Child status has changed (POSIX).  */
+#define SIGCLD		SIGCHLD	/* Same as SIGCHLD (System V).  */
+#define SIGPWR		19	/* Power failure restart (System V).  */
+#define SIGWINCH	20	/* Window size change (4.3 BSD, Sun).  */
+#define SIGURG		21	/* Urgent condition on socket (4.2 BSD).  */
+#define SIGIO		22	/* I/O now possible (4.2 BSD).  */
+#define SIGPOLL		SIGIO	/* Pollable event occurred (System V).  */
+#define SIGSTOP		23	/* Stop, unblockable (POSIX).  */
+#define SIGTSTP		24	/* Keyboard stop (POSIX).  */
+#define SIGCONT		25	/* Continue (POSIX).  */
+#define SIGTTIN		26	/* Background read from tty (POSIX).  */
+#define SIGTTOU		27	/* Background write to tty (POSIX).  */
+#define SIGVTALRM	28	/* Virtual alarm clock (4.2 BSD).  */
+#define SIGPROF		29	/* Profiling alarm clock (4.2 BSD).  */
+#define SIGXCPU		30	/* CPU limit exceeded (4.2 BSD).  */
+#define SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).  */
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK	0x08000000
+#define SA_RESETHAND	0x80000000
+#define SA_RESTART	0x10000000
+#define SA_SIGINFO	0x00000008
+#define SA_NODEFER	0x40000000
+#define SA_NOCLDWAIT	0x00010000
+#define SA_NOCLDSTOP	0x00000001
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000	/* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000	/* Only for o32 */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK     1
+#define SS_DISABLE     2
+
+#define MINSIGSTKSZ    2048
+#define SIGSTKSZ       8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x02000000
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK	1	/* for blocking signals */
+#define SIG_UNBLOCK	2	/* for unblocking signals */
+#define SIG_SETMASK	3	/* for setting the signal mask */
+#define SIG_SETMASK32	256	/* Goodie from SGI for BSD compatibility:
+				   set only the low 32 bit of the sigset.  */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+/* Fake signal functions */
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+struct sigaction {
+	unsigned int	sa_flags;
+	__sighandler_t	sa_handler;
+	sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+#ifdef CONFIG_BINFMT_IRIX
+	void		(*sa_restorer)(void);
+#endif
+};
+
+/* IRIX compatible stack_t  */
+typedef struct sigaltstack {
+	void *ss_sp;
+	size_t ss_size;
+	int ss_flags;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP	0	/* User bp (used by debuggers) */
+#define BRK_KERNELBP	1	/* Break in the kernel */
+#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
+#define BRK_OVERFLOW	6	/* Overflow check */
+#define BRK_DIVZERO	7	/* Divide by zero check */
+#define BRK_RANGE	8	/* Range error check */
+#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
+#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
+#define BRK_MULOVF	1023	/* Multiply overflow */
+#define BRK_BUG		512	/* Used by BUG() */
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/include/asm-mips/sim.h b/include/asm-mips/sim.h
new file mode 100644
index 000000000000..6333169be329
--- /dev/null
+++ b/include/asm-mips/sim.h
@@ -0,0 +1,83 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIM_H
+#define _ASM_SIM_H
+
+#include <linux/config.h>
+
+#include <asm/offset.h>
+
+#define __str2(x) #x
+#define __str(x) __str2(x)
+
+#ifdef CONFIG_MIPS32
+
+#define save_static_function(symbol)					\
+__asm__ (								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sw\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sw\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sw\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sw\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sw\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sw\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sw\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sw\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+
+#define save_static_function(symbol)					\
+__asm__ (								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sd\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sd\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sd\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sd\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sd\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sd\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sd\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sd\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs							\
+	unsigned long __dummy0,						\
+	unsigned long __dummy1,						\
+	unsigned long __dummy2,						\
+	unsigned long __dummy3,						\
+	unsigned long __dummy4,						\
+	unsigned long __dummy5,						\
+	unsigned long __dummy6,						\
+	unsigned long __dummy7,
+
+#endif /* CONFIG_MIPS64 */
+
+#endif /* _ASM_SIM_H */
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
new file mode 100644
index 000000000000..8ba370ecfd4c
--- /dev/null
+++ b/include/asm-mips/smp.h
@@ -0,0 +1,111 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+
+#include <linux/bitops.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/atomic.h>
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+/* Map from cpu id to sequential logical cpu number.  This will only
+   not be idempotent when cpus failed to come on-line.  */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+#define NO_PROC_ID	(-1)
+
+struct call_data_struct {
+	void		(*func)(void *);
+	void		*info;
+	atomic_t	started;
+	atomic_t	finished;
+	int		wait;
+};
+
+extern struct call_data_struct *call_data;
+
+#define SMP_RESCHEDULE_YOURSELF	0x1	/* XXX braindead */
+#define SMP_CALL_FUNCTION	0x2
+
+extern cpumask_t phys_cpu_present_map;
+extern cpumask_t cpu_online_map;
+#define cpu_possible_map	phys_cpu_present_map
+
+extern cpumask_t cpu_callout_map;
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+
+/* These are defined by the board-specific code. */
+
+/*
+ * Cause the function described by call_data to be executed on the passed
+ * cpu.  When the function has finished, increment the finished field of
+ * call_data.
+ */
+extern void core_send_ipi(int cpu, unsigned int action);
+
+/*
+ * Firmware CPU startup hook
+ */
+extern void prom_boot_secondary(int cpu, struct task_struct *idle);
+
+/*
+ *  After we've done initial boot, this function is called to allow the
+ *  board code to clean up state, if needed
+ */
+extern void prom_init_secondary(void);
+
+/*
+ * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ */
+extern void prom_prepare_cpus(unsigned int max_cpus);
+
+/*
+ * Last chance for the board code to finish SMP initialization before
+ * the CPU is "online".
+ */
+extern void prom_smp_finish(void);
+
+/* Hook for after all CPUs are online */
+extern void prom_cpus_done(void);
+
+extern void asmlinkage smp_bootstrap(void);
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static inline void smp_send_reschedule(int cpu)
+{
+	core_send_ipi(cpu, SMP_RESCHEDULE_YOURSELF);
+}
+
+extern asmlinkage void smp_call_function_interrupt(void);
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SMP_H */
diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h
new file mode 100644
index 000000000000..2b5cef1ba37f
--- /dev/null
+++ b/include/asm-mips/sn/addrs.h
@@ -0,0 +1,458 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_ADDRS_H
+#define _ASM_SN_ADDRS_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/addrspace.h>
+#include <asm/sn/kldir.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/addrs.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/addrs.h>
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_SGI_IO)	/* FIXME */
+#define PS_UINT_CAST		(__psunsigned_t)
+#define UINT64_CAST		(__uint64_t)
+#else	/* CONFIG_SGI_IO */
+#define PS_UINT_CAST		(unsigned long)
+#define UINT64_CAST		(unsigned long)
+#endif	/* CONFIG_SGI_IO */
+
+#define HUBREG_CAST		(volatile hubreg_t *)
+
+#else /* __ASSEMBLY__ */
+
+#define PS_UINT_CAST
+#define UINT64_CAST
+#define HUBREG_CAST
+
+#endif /* __ASSEMBLY__ */
+
+
+#define NASID_GET_META(_n)	((_n) >> NASID_LOCAL_BITS)
+#ifdef CONFIG_SGI_IP27
+#define NASID_GET_LOCAL(_n)	((_n) & 0xf)
+#endif
+#define NASID_MAKE(_m, _l)	(((_m) << NASID_LOCAL_BITS) | (_l))
+
+#define NODE_ADDRSPACE_MASK	(NODE_ADDRSPACE_SIZE - 1)
+#define TO_NODE_ADDRSPACE(_pa)	(UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK)
+
+#define CHANGE_ADDR_NASID(_pa, _nasid)	\
+		((UINT64_CAST (_pa) & ~NASID_MASK) | \
+		 (UINT64_CAST(_nasid) <<  NASID_SHFT))
+
+
+/*
+ * The following macros are used to index to the beginning of a specific
+ * node's address space.
+ */
+
+#define NODE_OFFSET(_n)		(UINT64_CAST (_n) << NODE_SIZE_BITS)
+
+#define NODE_CAC_BASE(_n)	(CAC_BASE   + NODE_OFFSET(_n))
+#define NODE_HSPEC_BASE(_n)	(HSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_IO_BASE(_n)	(IO_BASE    + NODE_OFFSET(_n))
+#define NODE_MSPEC_BASE(_n)	(MSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_UNCAC_BASE(_n)	(UNCAC_BASE + NODE_OFFSET(_n))
+
+#define TO_NODE(_n, _x)		(NODE_OFFSET(_n)     | ((_x)		   ))
+#define TO_NODE_CAC(_n, _x)	(NODE_CAC_BASE(_n)   | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_UNCAC(_n, _x)	(NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_MSPEC(_n, _x)	(NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_HSPEC(_n, _x)	(NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+
+
+#define RAW_NODE_SWIN_BASE(nasid, widget)				\
+	(NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS))
+
+#define WIDGETID_GET(addr)	((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff))
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS		24
+#define SWIN_SIZE		(UINT64_CAST 1 << 24)
+#define	SWIN_SIZEMASK		(SWIN_SIZE - 1)
+#define	SWIN_WIDGET_MASK	0xF
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
+#define	SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to small window address on node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+#define	NODE_SWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_SWIN_BASE(nasid, 0))  && \
+		 ((addr) <  (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
+		 ))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN.
+ *	UALIAS -- 256MB in size, reads in the UALIAS result in
+ *			uncached references to the memory of the reader's node.
+ *	CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped
+ *			depending on which CPU does the access to provide
+ *			all CPUs with unique uncached memory at low addresses.
+ *	LBOOT  -- 256MB in size, reads in the LBOOT area result in
+ *			uncached references to the local hub's boot prom and
+ *			other directory-bus connected devices.
+ *	IALIAS -- 8MB in size, reads in the IALIAS result in uncached
+ *			references to the local hub's registers.
+ */
+
+#define UALIAS_BASE		HSPEC_BASE
+#define UALIAS_SIZE		0x10000000	/* 256 Megabytes */
+#define UALIAS_LIMIT		(UALIAS_BASE + UALIAS_SIZE)
+
+/*
+ * The bottom of ualias space is flipped depending on whether you're
+ * processor 0 or 1 within a node.
+ */
+#ifdef CONFIG_SGI_IP27
+#define UALIAS_FLIP_BASE	UALIAS_BASE
+#define UALIAS_FLIP_SIZE	0x20000
+#define UALIAS_FLIP_BIT		0x10000
+#define UALIAS_FLIP_ADDR(_x)	(cputoslice(smp_processor_id()) ? \
+				 (_x) ^ UALIAS_FLIP_BIT : (_x))
+
+#define LBOOT_BASE		(HSPEC_BASE + 0x10000000)
+#define LBOOT_SIZE		0x10000000
+#define LBOOT_LIMIT		(LBOOT_BASE + LBOOT_SIZE)
+#define LBOOT_STRIDE		0		/* IP27 has only one CPU PROM */
+
+#endif
+
+#define	HUB_REGISTER_WIDGET	1
+#define IALIAS_BASE		NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
+#define IALIAS_SIZE		0x800000	/* 8 Megabytes */
+#define IS_IALIAS(_a)		(((_a) >= IALIAS_BASE) &&		\
+				 ((_a) < (IALIAS_BASE + IALIAS_SIZE)))
+
+/*
+ * Macro for referring to Hub's RBOOT space
+ */
+
+#ifdef CONFIG_SGI_IP27
+#define RBOOT_SIZE		0x10000000	/* 256 Megabytes */
+#define NODE_RBOOT_BASE(_n)	(NODE_HSPEC_BASE(_n) + 0x30000000)
+#define NODE_RBOOT_LIMIT(_n)	(NODE_RBOOT_BASE(_n) + RBOOT_SIZE)
+
+#endif
+
+/*
+ * Macros for referring the Hub's back door space
+ *
+ *   These macros correctly process addresses in any node's space.
+ *   WARNING: They won't work in assembler.
+ *
+ *   BDDIR_ENTRY_LO returns the address of the low double-word of the dir
+ *                  entry corresponding to a physical (Cac or Uncac) address.
+ *   BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
+ *   BDPRT_ENTRY    returns the address of the double-word protection entry
+ *                  corresponding to the page containing the physical address.
+ *   BDPRT_ENTRY_S  Stores the value into the protection entry.
+ *   BDPRT_ENTRY_L  Load the value from the protection entry.
+ *   BDECC_ENTRY    returns the address of the ECC byte corresponding to a
+ *                  double-word at a specified physical address.
+ *   BDECC_ENTRY_H  returns the address of the two ECC bytes corresponding to a
+ *                  quad-word at a specified physical address.
+ */
+#define NODE_BDOOR_BASE(_n)	(NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
+
+#define NODE_BDECC_BASE(_n)	(NODE_BDOOR_BASE(_n))
+#define NODE_BDDIR_BASE(_n)	(NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4))
+#ifdef CONFIG_SGI_IP27
+#define BDDIR_ENTRY_LO(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x200)				    | \
+				 UINT64_CAST (_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST (_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST (_pa) >> 3 & 0x1f << 4)
+
+#define BDDIR_ENTRY_HI(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x208)				    | \
+				 UINT64_CAST (_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST (_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST (_pa) >> 3 & 0x1f << 4)
+
+#define BDPRT_ENTRY(_pa, _rgn)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4)		    | \
+				 UINT64_CAST (_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST (_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 (_rgn) << 3)
+#define BDPRT_ENTRY_ADDR(_pa,_rgn) (BDPRT_ENTRY((_pa),(_rgn)))
+#define BDPRT_ENTRY_S(_pa,_rgn,_val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa),(_rgn))=(_val))
+#define BDPRT_ENTRY_L(_pa,_rgn)	(*(__psunsigned_t *)BDPRT_ENTRY((_pa),(_rgn)))
+
+#define BDECC_ENTRY(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE / 2)		    | \
+				 UINT64_CAST (_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST (_pa) >> 2 & BDECC_UPPER_MASK  | \
+				 UINT64_CAST (_pa) >> 3 & 3)
+
+/*
+ * Macro to convert a back door directory or protection address into the
+ *   raw physical address of the associated cache line or protection page.
+ */
+#define BDADDR_IS_DIR(_ba)	((UINT64_CAST  (_ba) & 0x200) != 0)
+#define BDADDR_IS_PRT(_ba)	((UINT64_CAST  (_ba) & 0x200) == 0)
+
+#define BDDIR_TO_MEM(_ba)	(UINT64_CAST  (_ba) & NASID_MASK            | \
+				 (UINT64_CAST (_ba) & BDDIR_UPPER_MASK)<<2  | \
+				 (UINT64_CAST (_ba) & 0x1f << 4) << 3)
+
+#define BDPRT_TO_MEM(_ba) 	(UINT64_CAST  (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST (_ba) & BDDIR_UPPER_MASK)<<2)
+
+#define BDECC_TO_MEM(_ba)	(UINT64_CAST  (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST (_ba) & BDECC_UPPER_MASK)<<2  | \
+				 (UINT64_CAST (_ba) & 3) << 3)
+#endif /* CONFIG_SGI_IP27 */
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers.  The LOCAL_HUB_* macros produce the appropriate
+ * address for the local registers.  The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for _x.
+ */
+
+#ifdef _STANDALONE
+
+/* DO NOT USE THESE DIRECTLY IN THE KERNEL. SEE BELOW. */
+#define LOCAL_HUB(_x)		(HUBREG_CAST (IALIAS_BASE + (_x)))
+#define REMOTE_HUB(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#endif /* _STANDALONE */
+
+/*
+ * WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+#define LOCAL_HUB_ADDR(_x)	(HUBREG_CAST (IALIAS_BASE + (_x)))
+#define REMOTE_HUB_ADDR(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#ifdef CONFIG_SGI_IP27
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#endif /* CONFIG_SGI_IP27 */
+
+#ifndef __ASSEMBLY__
+
+#define HUB_L(_a)			*(_a)
+#define	HUB_S(_a, _d)			*(_a) = (_d)
+
+#define LOCAL_HUB_L(_r)			HUB_L(LOCAL_HUB_ADDR(_r))
+#define LOCAL_HUB_S(_r, _d)		HUB_S(LOCAL_HUB_ADDR(_r), (_d))
+#define REMOTE_HUB_L(_n, _r)		HUB_L(REMOTE_HUB_ADDR((_n), (_r)))
+#define REMOTE_HUB_S(_n, _r, _d)	HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d))
+#define REMOTE_HUB_PI_L(_n, _sn, _r)	HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)))
+#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The following macros are used to get to a hub/bridge register, given
+ * the base of the register space.
+ */
+#define HUB_REG_PTR(_base, _off)	\
+	(HUBREG_CAST ((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define HUB_REG_PTR_L(_base, _off)	\
+	HUB_L(HUB_REG_PTR((_base), (_off)))
+
+#define HUB_REG_PTR_S(_base, _off, _data)	\
+	HUB_S(HUB_REG_PTR((_base), (_off)), (_data))
+
+/*
+ * Software structure locations -- permanently fixed
+ *    See diagram in kldir.h
+ */
+
+#define PHYS_RAMBASE		0x0
+#define K0_RAMBASE		PHYS_TO_K0(PHYS_RAMBASE)
+
+#define EX_HANDLER_OFFSET(slice) ((slice) << 16)
+#define EX_HANDLER_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice))
+#define EX_HANDLER_SIZE		0x0400
+
+#define EX_FRAME_OFFSET(slice)	((slice) << 16 | 0x400)
+#define EX_FRAME_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice))
+#define EX_FRAME_SIZE		0x0c00
+
+#define ARCS_SPB_OFFSET		0x1000
+#define ARCS_SPB_ADDR(nasid)						\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
+#define ARCS_SPB_SIZE		0x0400
+
+#ifdef _STANDALONE
+
+#define ARCS_TVECTOR_OFFSET	0x2800
+#define ARCS_PVECTOR_OFFSET	0x2c00
+
+/*
+ * These addresses are used by the master CPU to install the transfer
+ * and private vectors.  All others use the SPB to find them.
+ */
+#define TVADDR	(NODE_CAC_BASE(get_nasid()) + ARCS_TVECTOR_OFFSET)
+#define PVADDR	(NODE_CAC_BASE(get_nasid()) + ARCS_PVECTOR_OFFSET)
+
+#endif /* _STANDALONE */
+
+#define KLDIR_OFFSET		0x2000
+#define KLDIR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
+#define KLDIR_SIZE		0x0400
+
+
+/*
+ * Software structure locations -- indirected through KLDIR
+ *    See diagram in kldir.h
+ *
+ * Important:	All low memory structures must only be accessed
+ *		uncached, except for the symmon stacks.
+ */
+
+#define KLI_LAUNCH		0		/* Dir. entries */
+#define KLI_KLCONFIG		1
+#define	KLI_NMI			2
+#define KLI_GDA			3
+#define KLI_FREEMEM		4
+#define	KLI_SYMMON_STK		5
+#define KLI_PI_ERROR		6
+#define KLI_KERN_VARS		7
+#define	KLI_KERN_XP		8
+#define	KLI_KERN_PARTID		9
+
+#ifndef __ASSEMBLY__
+
+#define KLD_BASE(nasid)		((kldir_ent_t *) KLDIR_ADDR(nasid))
+#define KLD_LAUNCH(nasid)	(KLD_BASE(nasid) + KLI_LAUNCH)
+#define KLD_NMI(nasid)		(KLD_BASE(nasid) + KLI_NMI)
+#define KLD_KLCONFIG(nasid)	(KLD_BASE(nasid) + KLI_KLCONFIG)
+#define KLD_PI_ERROR(nasid)	(KLD_BASE(nasid) + KLI_PI_ERROR)
+#define KLD_GDA(nasid)		(KLD_BASE(nasid) + KLI_GDA)
+#define KLD_SYMMON_STK(nasid)	(KLD_BASE(nasid) + KLI_SYMMON_STK)
+#define KLD_FREEMEM(nasid)	(KLD_BASE(nasid) + KLI_FREEMEM)
+#define KLD_KERN_VARS(nasid)	(KLD_BASE(nasid) + KLI_KERN_VARS)
+#define	KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
+#define	KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
+
+#define LAUNCH_OFFSET(nasid, slice)					\
+	(KLD_LAUNCH(nasid)->offset +					\
+	 KLD_LAUNCH(nasid)->stride * (slice))
+#define LAUNCH_ADDR(nasid, slice)					\
+	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
+#define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
+
+#define NMI_OFFSET(nasid, slice)					\
+	(KLD_NMI(nasid)->offset +					\
+	 KLD_NMI(nasid)->stride * (slice))
+#define NMI_ADDR(nasid, slice)						\
+	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+#define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
+
+#define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
+#define KLCONFIG_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid))
+#define KLCONFIG_SIZE(nasid)	KLD_KLCONFIG(nasid)->size
+
+#define GDA_ADDR(nasid)		KLD_GDA(nasid)->pointer
+#define GDA_SIZE(nasid)		KLD_GDA(nasid)->size
+
+#define SYMMON_STK_OFFSET(nasid, slice)					\
+	(KLD_SYMMON_STK(nasid)->offset +				\
+	 KLD_SYMMON_STK(nasid)->stride * (slice))
+#define SYMMON_STK_STRIDE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_ADDR(nasid, slice)					\
+	TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice))
+
+#define SYMMON_STK_SIZE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_END(nasid)	(SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size)
+
+/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
+ * relocatable program
+ */
+#define	UNIX_DEBUG_LOADADDR	0x300000
+#define	SYMMON_LOADADDR(nasid)						\
+	TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
+
+#define FREEMEM_OFFSET(nasid)	KLD_FREEMEM(nasid)->offset
+#define FREEMEM_ADDR(nasid)	SYMMON_STK_END(nasid)
+/*
+ * XXX
+ * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded.
+ * Also, it should take into account what prom thinks to be a safe
+ * address
+	PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid))
+ */
+#define FREEMEM_SIZE(nasid)	KLD_FREEMEM(nasid)->size
+
+#define PI_ERROR_OFFSET(nasid)	KLD_PI_ERROR(nasid)->offset
+#define PI_ERROR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid))
+#define PI_ERROR_SIZE(nasid)	KLD_PI_ERROR(nasid)->size
+
+#define NODE_OFFSET_TO_K0(_nasid, _off)					\
+	PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE)
+#define NODE_OFFSET_TO_K1(_nasid, _off)					\
+	TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE)
+#define K0_TO_NODE_OFFSET(_k0addr)					\
+	((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK)
+
+#define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
+#define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
+
+#define	KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
+#define	KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
+
+#define GPDA_ADDR(nasid)	TO_NODE_CAC(nasid, GPDA_OFFSET)
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_SN_ADDRS_H */
diff --git a/include/asm-mips/sn/agent.h b/include/asm-mips/sn/agent.h
new file mode 100644
index 000000000000..d6df13aaed49
--- /dev/null
+++ b/include/asm-mips/sn/agent.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file has definitions for the hub and snac interfaces.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGI_SN_AGENT_H
+#define _ASM_SGI_SN_AGENT_H
+
+#include <linux/config.h>
+#include <linux/topology.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hub.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/hub.h>
+#endif	/* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+/*
+ * NIC register macros
+ */
+
+#if defined(CONFIG_SGI_IP27)
+#define HUB_NIC_ADDR(_cpuid) 						   \
+	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),       \
+		MD_MLAN_CTL)
+#endif
+
+#define SET_HUB_NIC(_my_cpuid, _val) 				  	   \
+	(HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val)))
+
+#define SET_MY_HUB_NIC(_v) 					           \
+	SET_HUB_NIC(cpuid(), (_v))
+
+#define GET_HUB_NIC(_my_cpuid) 						   \
+	(HUB_L(HUB_NIC_ADDR(_my_cpuid)))
+
+#define GET_MY_HUB_NIC() 						   \
+	GET_HUB_NIC(cpuid())
+
+#endif /* _ASM_SGI_SN_AGENT_H */
diff --git a/include/asm-mips/sn/arch.h b/include/asm-mips/sn/arch.h
new file mode 100644
index 000000000000..d247a819de7f
--- /dev/null
+++ b/include/asm-mips/sn/arch.h
@@ -0,0 +1,66 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_ARCH_H
+#define _ASM_SN_ARCH_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/sn/types.h>
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/arch.h>
+#endif
+
+typedef u64	hubreg_t;
+typedef u64	nic_t;
+
+#define cputonasid(cpu)			(cpu_data[(cpu)].p_nasid)
+#define cputoslice(cpu)			(cpu_data[(cpu)].p_slice)
+#define makespnum(_nasid, _slice)					\
+		(((_nasid) << CPUS_PER_NODE_SHFT) | (_slice))
+
+#define INVALID_NASID		(nasid_t)-1
+#define INVALID_CNODEID		(cnodeid_t)-1
+#define INVALID_PNODEID		(pnodeid_t)-1
+#define INVALID_MODULE		(moduleid_t)-1
+#define	INVALID_PARTID		(partid_t)-1
+
+extern nasid_t get_nasid(void);
+extern cnodeid_t get_cpu_cnode(cpuid_t);
+extern int get_cpu_slice(cpuid_t);
+
+/*
+ * NO ONE should access these arrays directly.  The only reason we refer to
+ * them here is to avoid the procedure call that would be required in the
+ * macros below.  (Really want private data members here :-)
+ */
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+
+/*
+ * These macros are used by various parts of the kernel to convert
+ * between the three different kinds of node numbering.   At least some
+ * of them may change to procedure calls in the future, but the macros
+ * will continue to work.  Don't use the arrays above directly.
+ */
+
+#define	NASID_TO_REGION(nnode)	      	\
+    ((nnode) >> \
+     (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT))
+
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+extern cnodeid_t cpuid_to_compact_node[MAXCPUS];
+
+#define NASID_TO_COMPACT_NODEID(nnode)	(nasid_to_compact_node[nnode])
+#define COMPACT_TO_NASID_NODEID(cnode)	(compact_to_nasid_node[cnode])
+#define CPUID_TO_COMPACT_NODEID(cpu)	(cpuid_to_compact_node[(cpu)])
+
+#endif /* _ASM_SN_ARCH_H */
diff --git a/include/asm-mips/sn/gda.h b/include/asm-mips/sn/gda.h
new file mode 100644
index 000000000000..9cb6ff770915
--- /dev/null
+++ b/include/asm-mips/sn/gda.h
@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/gda.h>.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ *
+ * gda.h -- Contains the data structure for the global data area,
+ * 	The GDA contains information communicated between the
+ *	PROM, SYMMON, and the kernel.
+ */
+#ifndef _ASM_SN_GDA_H
+#define _ASM_SN_GDA_H
+
+#include <asm/sn/addrs.h>
+
+#define GDA_MAGIC	0x58464552
+
+/*
+ * GDA Version History
+ *
+ * Version #	| Change
+ * -------------+-------------------------------------------------------
+ * 	1	| Initial SN0 version
+ * 	2	| Prom sets g_partid field to the partition number. 0 IS
+ *		| a valid partition #.
+ */
+
+#define GDA_VERSION	2	/* Current GDA version # */
+
+#define G_MAGICOFF	0
+#define G_VERSIONOFF	4
+#define G_PROMOPOFF	6
+#define G_MASTEROFF	8
+#define G_VDSOFF	12
+#define G_HKDNORMOFF	16
+#define G_HKDUTLBOFF	24
+#define G_HKDXUTLBOFF	32
+#define G_PARTIDOFF	40
+#define G_TABLEOFF	128
+
+#ifndef __ASSEMBLY__
+
+typedef struct gda {
+	u32	g_magic;	/* GDA magic number */
+	u16	g_version;	/* Version of this structure */
+	u16	g_masterid;	/* The NASID:CPUNUM of the master cpu */
+	u32	g_promop;	/* Passes requests from the kernel to prom */
+	u32	g_vds;		/* Store the virtual dipswitches here */
+	void	**g_hooked_norm;/* ptr to pda loc for norm hndlr */
+	void	**g_hooked_utlb;/* ptr to pda loc for utlb hndlr */
+	void	**g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */
+	int	g_partid;	/* partition id */
+	int	g_symmax;	/* Max symbols in name table. */
+	void	*g_dbstab;	/* Address of idbg symbol table */
+	char	*g_nametab;	/* Address of idbg name table */
+	void	*g_ktext_repmask;
+				/* Pointer to a mask of nodes with copies
+				 * of the kernel. */
+	char	g_padding[56];	/* pad out to 128 bytes */
+	nasid_t	g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
+						  * indexed by cnodeid.
+						  */
+} gda_t;
+
+#define GDA ((gda_t*) GDA_ADDR(get_nasid()))
+
+#endif /* !__ASSEMBLY__ */
+/*
+ * Define:	PART_GDA_VERSION
+ * Purpose:	Define the minimum version of the GDA required, lower
+ *		revisions assume GDA is NOT set up, and read partition
+ *		information from the board info.
+ */
+#define	PART_GDA_VERSION	2
+
+/*
+ * The following requests can be sent to the PROM during startup.
+ */
+
+#define PROMOP_MAGIC		0x0ead0000
+#define PROMOP_MAGIC_MASK	0x0fff0000
+
+#define PROMOP_BIST_SHIFT       11
+#define PROMOP_BIST_MASK        (0x3 << 11)
+
+#define PROMOP_REG		PI_ERR_STACK_ADDR_A
+
+#define PROMOP_INVALID		(PROMOP_MAGIC | 0x00)
+#define PROMOP_HALT             (PROMOP_MAGIC | 0x10)
+#define PROMOP_POWERDOWN        (PROMOP_MAGIC | 0x20)
+#define PROMOP_RESTART          (PROMOP_MAGIC | 0x30)
+#define PROMOP_REBOOT           (PROMOP_MAGIC | 0x40)
+#define PROMOP_IMODE            (PROMOP_MAGIC | 0x50)
+
+#define PROMOP_CMD_MASK		0x00f0
+#define PROMOP_OPTIONS_MASK	0xfff0
+
+#define PROMOP_SKIP_DIAGS	0x0100		/* don't bother running diags */
+#define PROMOP_SKIP_MEMINIT	0x0200		/* don't bother initing memory */
+#define PROMOP_SKIP_DEVINIT	0x0400		/* don't bother initing devices */
+#define PROMOP_BIST1		0x0800		/* keep track of which BIST ran */
+#define PROMOP_BIST2		0x1000		/* keep track of which BIST ran */
+
+#endif /* _ASM_SN_GDA_H */
diff --git a/include/asm-mips/sn/hub.h b/include/asm-mips/sn/hub.h
new file mode 100644
index 000000000000..1992d9254a08
--- /dev/null
+++ b/include/asm-mips/sn/hub.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SN_HUB_H
+#define __ASM_SN_HUB_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/sn/types.h>
+#include <asm/sn/io.h>
+#include <asm/sn/klkernvars.h>
+#include <asm/xtalk/xtalk.h>
+
+/* ip27-hubio.c */
+extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
+			  unsigned long xtalk_addr, size_t size);
+extern void hub_pio_init(cnodeid_t cnode);
+
+#endif /* __ASM_SN_HUB_H */
diff --git a/include/asm-mips/sn/intr.h b/include/asm-mips/sn/intr.h
new file mode 100644
index 000000000000..6718b644b970
--- /dev/null
+++ b/include/asm-mips/sn/intr.h
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS		64
+
+#define INT_PEND0_BASELVL	0
+#define INT_PEND1_BASELVL	64
+
+#define	N_INTPENDJUNK_BITS	8
+#define	INTPENDJUNK_CLRBIT	0x80
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(level)				\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
+#define REMOTE_HUB_SEND_INTR(hub, level)			\
+	REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(level)	  			\
+do {								\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
+	LOCAL_HUB_L(PI_INT_PEND0);				\
+} while (0);
+
+#define REMOTE_HUB_CLR_INTR(hub, level)				\
+do {								\
+	nasid_t  __hub = (hub);					\
+								\
+	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
+	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
+} while (0);
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ *	L0 = SW1
+ *	L1 = SW2
+ *	L2 = INT_PEND0
+ *	L3 = INT_PEND1
+ *	L4 = RTC
+ *	L5 = Profiling Timer
+ *	L6 = Hub Errors
+ *	L7 = Count/Compare (T5 counters)
+ */
+
+
+/*
+ * INT_PEND0 hard-coded bits.
+ */
+
+/*
+ * INT_PEND0 bits determined by hardware:
+ */
+#define RESERVED_INTR		 0	/* What is this bit? */
+#define GFX_INTR_A		 1
+#define GFX_INTR_B		 2
+#define PG_MIG_INTR		 3
+#define UART_INTR		 4
+#define CC_PEND_A		 5
+#define CC_PEND_B		 6
+
+/*
+ * INT_PEND0 used by the kernel for itself ...
+ */
+#define CPU_RESCHED_A_IRQ	 7
+#define CPU_RESCHED_B_IRQ	 8
+#define CPU_CALL_A_IRQ		 9
+#define CPU_CALL_B_IRQ		10
+#define MSC_MESG_INTR		11
+#define BASE_PCI_IRQ		12
+
+/*
+ * INT_PEND0 again, bits determined by hardware / hardcoded:
+ */
+#define SDISK_INTR		63	/* SABLE name */
+#define IP_PEND0_6_63		63	/* What is this bit? */
+
+/*
+ * INT_PEND1 hard-coded bits:
+ */
+#define NI_BRDCAST_ERR_A	39
+#define NI_BRDCAST_ERR_B	40
+
+#define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_B	42
+
+#define	TLB_INTR_A		43	/* used for tlb flush random */
+#define	TLB_INTR_B		44
+
+#define IP27_INTR_0		45	/* Reserved for PROM use */
+#define IP27_INTR_1		46	/* do not use in Kernel */
+#define IP27_INTR_2		47
+#define IP27_INTR_3		48
+#define IP27_INTR_4		49
+#define IP27_INTR_5		50
+#define IP27_INTR_6		51
+#define IP27_INTR_7		52
+
+#define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
+					/* Bridge Errors */
+#define	DEBUG_INTR_A		54
+#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
+#define IO_ERROR_INTR		57	/* Setup by PROM */
+#define CLK_ERR_INTR		58
+#define COR_ERR_INTR_A		59
+#define COR_ERR_INTR_B		60
+#define MD_COR_ERR_INTR		61
+#define NI_ERROR_INTR		62
+#define MSC_PANIC_INTR		63
+
+#endif /* __ASM_SN_INTR_H */
diff --git a/include/asm-mips/sn/io.h b/include/asm-mips/sn/io.h
new file mode 100644
index 000000000000..13326453efc9
--- /dev/null
+++ b/include/asm-mips/sn/io.h
@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2003 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+
+#include <linux/config.h>
+#if defined (CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hubio.h>
+#endif
+
+
+#define IIO_ITTE_BASE		0x400160 /* base of translation table entries */
+#define IIO_ITTE(bigwin)	(IIO_ITTE_BASE + 8*(bigwin))
+
+#define IIO_ITTE_OFFSET_BITS	5	/* size of offset field */
+#define IIO_ITTE_OFFSET_MASK	((1<<IIO_ITTE_OFFSET_BITS)-1)
+#define IIO_ITTE_OFFSET_SHIFT	0
+
+#define IIO_ITTE_WIDGET_BITS	4	/* size of widget field */
+#define IIO_ITTE_WIDGET_MASK	((1<<IIO_ITTE_WIDGET_BITS)-1)
+#define IIO_ITTE_WIDGET_SHIFT	8
+
+#define IIO_ITTE_IOSP		1	/* I/O Space bit */
+#define IIO_ITTE_IOSP_MASK	1
+#define IIO_ITTE_IOSP_SHIFT	12
+#define HUB_PIO_MAP_TO_MEM	0
+#define HUB_PIO_MAP_TO_IO	1
+
+#define IIO_ITTE_INVALID_WIDGET	3	/* an invalid widget  */
+
+#define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \
+	REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \
+		(((((addr) >> BWIN_SIZE_BITS) & \
+		   IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \
+		(io_or_mem << IIO_ITTE_IOSP_SHIFT) | \
+		(((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT)))
+
+#define IIO_ITTE_DISABLE(nasid, bigwin) \
+	IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \
+		     (bigwin), IIO_ITTE_INVALID_WIDGET, 0)
+
+#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin))
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define	IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+			(_x) : \
+			(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+#endif /* _ASM_SN_IO_H */
diff --git a/include/asm-mips/sn/ioc3.h b/include/asm-mips/sn/ioc3.h
new file mode 100644
index 000000000000..f7d530f306f2
--- /dev/null
+++ b/include/asm-mips/sn/ioc3.h
@@ -0,0 +1,661 @@
+/*
+ * Copyright (C) 1999, 2000 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _IOC3_H
+#define _IOC3_H
+
+/* SUPERIO uart register map */
+typedef volatile struct ioc3_uartregs {
+	union {
+		volatile u8	rbr;	/* read only, DLAB == 0 */
+		volatile u8	thr;	/* write only, DLAB == 0 */
+		volatile u8	dll;	/* DLAB == 1 */
+	} u1;
+	union {
+		volatile u8	ier;	/* DLAB == 0 */
+		volatile u8	dlm;	/* DLAB == 1 */
+	} u2;
+	union {
+		volatile u8	iir;	/* read only */
+		volatile u8	fcr;	/* write only */
+	} u3;
+	volatile u8	    iu_lcr;
+	volatile u8	    iu_mcr;
+	volatile u8	    iu_lsr;
+	volatile u8	    iu_msr;
+	volatile u8	    iu_scr;
+} ioc3_uregs_t;
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+	volatile u8		fill[0x141];	/* starts at 0x141 */
+
+	volatile u8		uartc;
+	volatile u8		kbdcg;
+
+	volatile u8		fill0[0x150 - 0x142 - 1];
+
+	volatile u8		pp_data;
+	volatile u8		pp_dsr;
+	volatile u8		pp_dcr;
+
+	volatile u8		fill1[0x158 - 0x152 - 1];
+
+	volatile u8		pp_fifa;
+	volatile u8		pp_cfgb;
+	volatile u8		pp_ecr;
+
+	volatile u8		fill2[0x168 - 0x15a - 1];
+
+	volatile u8		rtcad;
+	volatile u8		rtcdat;
+
+	volatile u8		fill3[0x170 - 0x169 - 1];
+
+	struct ioc3_uartregs    uartb;	/* 0x20170  */
+	struct ioc3_uartregs    uarta;	/* 0x20178  */
+};
+
+/* Register layout of IOC3 in configuration space.  */
+struct ioc3 {
+	volatile u32	pad0[7];	/* 0x00000  */
+	volatile u32	sio_ir;		/* 0x0001c  */
+	volatile u32	sio_ies;	/* 0x00020  */
+	volatile u32	sio_iec;	/* 0x00024  */
+	volatile u32	sio_cr;		/* 0x00028  */
+	volatile u32	int_out;	/* 0x0002c  */
+	volatile u32	mcr;		/* 0x00030  */
+
+	/* General Purpose I/O registers  */
+	volatile u32	gpcr_s;		/* 0x00034  */
+	volatile u32	gpcr_c;		/* 0x00038  */
+	volatile u32	gpdr;		/* 0x0003c  */
+	volatile u32	gppr_0;		/* 0x00040  */
+	volatile u32	gppr_1;		/* 0x00044  */
+	volatile u32	gppr_2;		/* 0x00048  */
+	volatile u32	gppr_3;		/* 0x0004c  */
+	volatile u32	gppr_4;		/* 0x00050  */
+	volatile u32	gppr_5;		/* 0x00054  */
+	volatile u32	gppr_6;		/* 0x00058  */
+	volatile u32	gppr_7;		/* 0x0005c  */
+	volatile u32	gppr_8;		/* 0x00060  */
+	volatile u32	gppr_9;		/* 0x00064  */
+	volatile u32	gppr_10;	/* 0x00068  */
+	volatile u32	gppr_11;	/* 0x0006c  */
+	volatile u32	gppr_12;	/* 0x00070  */
+	volatile u32	gppr_13;	/* 0x00074  */
+	volatile u32	gppr_14;	/* 0x00078  */
+	volatile u32	gppr_15;	/* 0x0007c  */
+
+	/* Parallel Port Registers  */
+	volatile u32	ppbr_h_a;	/* 0x00080  */
+	volatile u32	ppbr_l_a;	/* 0x00084  */
+	volatile u32	ppcr_a;		/* 0x00088  */
+	volatile u32	ppcr;		/* 0x0008c  */
+	volatile u32	ppbr_h_b;	/* 0x00090  */
+	volatile u32	ppbr_l_b;	/* 0x00094  */
+	volatile u32	ppcr_b;		/* 0x00098  */
+
+	/* Keyboard and Mouse Registers  */
+	volatile u32	km_csr;		/* 0x0009c  */
+	volatile u32	k_rd;		/* 0x000a0  */
+	volatile u32	m_rd;		/* 0x000a4  */
+	volatile u32	k_wd;		/* 0x000a8  */
+	volatile u32	m_wd;		/* 0x000ac  */
+
+	/* Serial Port Registers  */
+	volatile u32	sbbr_h;		/* 0x000b0  */
+	volatile u32	sbbr_l;		/* 0x000b4  */
+	volatile u32	sscr_a;		/* 0x000b8  */
+	volatile u32	stpir_a;	/* 0x000bc  */
+	volatile u32	stcir_a;	/* 0x000c0  */
+	volatile u32	srpir_a;	/* 0x000c4  */
+	volatile u32	srcir_a;	/* 0x000c8  */
+	volatile u32	srtr_a;		/* 0x000cc  */
+	volatile u32	shadow_a;	/* 0x000d0  */
+	volatile u32	sscr_b;		/* 0x000d4  */
+	volatile u32	stpir_b;	/* 0x000d8  */
+	volatile u32	stcir_b;	/* 0x000dc  */
+	volatile u32	srpir_b;	/* 0x000e0  */
+	volatile u32	srcir_b;	/* 0x000e4  */
+	volatile u32	srtr_b;		/* 0x000e8  */
+	volatile u32	shadow_b;	/* 0x000ec  */
+
+	/* Ethernet Registers  */
+	volatile u32	emcr;		/* 0x000f0  */
+	volatile u32	eisr;		/* 0x000f4  */
+	volatile u32	eier;		/* 0x000f8  */
+	volatile u32	ercsr;		/* 0x000fc  */
+	volatile u32	erbr_h;		/* 0x00100  */
+	volatile u32	erbr_l;		/* 0x00104  */
+	volatile u32	erbar;		/* 0x00108  */
+	volatile u32	ercir;		/* 0x0010c  */
+	volatile u32	erpir;		/* 0x00110  */
+	volatile u32	ertr;		/* 0x00114  */
+	volatile u32	etcsr;		/* 0x00118  */
+	volatile u32	ersr;		/* 0x0011c  */
+	volatile u32	etcdc;		/* 0x00120  */
+	volatile u32	ebir;		/* 0x00124  */
+	volatile u32	etbr_h;		/* 0x00128  */
+	volatile u32	etbr_l;		/* 0x0012c  */
+	volatile u32	etcir;		/* 0x00130  */
+	volatile u32	etpir;		/* 0x00134  */
+	volatile u32	emar_h;		/* 0x00138  */
+	volatile u32	emar_l;		/* 0x0013c  */
+	volatile u32	ehar_h;		/* 0x00140  */
+	volatile u32	ehar_l;		/* 0x00144  */
+	volatile u32	micr;		/* 0x00148  */
+	volatile u32	midr_r;		/* 0x0014c  */
+	volatile u32	midr_w;		/* 0x00150  */
+	volatile u32	pad1[(0x20000 - 0x00154) / 4];
+
+	/* SuperIO Registers  XXX */
+	struct ioc3_sioregs	sregs;	/* 0x20000 */
+	volatile u32	pad2[(0x40000 - 0x20180) / 4];
+
+	/* SSRAM Diagnostic Access */
+	volatile u32	ssram[(0x80000 - 0x40000) / 4];
+
+	/* Bytebus device offsets
+	   0x80000 -   Access to the generic devices selected with   DEV0
+	   0x9FFFF     bytebus DEV_SEL_0
+	   0xA0000 -   Access to the generic devices selected with   DEV1
+	   0xBFFFF     bytebus DEV_SEL_1
+	   0xC0000 -   Access to the generic devices selected with   DEV2
+	   0xDFFFF     bytebus DEV_SEL_2
+	   0xE0000 -   Access to the generic devices selected with   DEV3
+	   0xFFFFF     bytebus DEV_SEL_3  */
+};
+
+/*
+ * Ethernet RX Buffer
+ */
+struct ioc3_erxbuf {
+	u32	w0;			/* first word (valid,bcnt,cksum) */
+	u32	err;			/* second word various errors */
+	/* next comes n bytes of padding */
+	/* then the received ethernet frame itself */
+};
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+/*
+ * Ethernet TX Descriptor
+ */
+#define ETXD_DATALEN    104
+struct ioc3_etxd {
+	u32	cmd;				/* command field */
+	u32	bufcnt;				/* buffer counts field */
+	u64	p1;				/* buffer pointer 1 */
+	u64	p2;				/* buffer pointer 2 */
+	u8	data[ETXD_DATALEN];		/* opt. tx data */
+};
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0	0x80000L
+#define IOC3_BYTEBUS_DEV1	0xa0000L
+#define IOC3_BYTEBUS_DEV2	0xc0000L
+#define IOC3_BYTEBUS_DEV3	0xe0000L
+
+/* ------------------------------------------------------------------------- */
+
+/* Superio Registers (PIO Access) */
+#define IOC3_SIO_BASE		0x20000
+#define IOC3_SIO_UARTC		(IOC3_SIO_BASE+0x141)	/* UART Config */
+#define IOC3_SIO_KBDCG		(IOC3_SIO_BASE+0x142)	/* KBD Config */
+#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)		/* Parallel Port */
+#define IOC3_SIO_RTC_BASE	(IOC3_SIO_BASE+0x168)	/* Real Time Clock */
+#define IOC3_SIO_UB_BASE	(IOC3_SIO_BASE+UARTB_BASE)	/* UART B */
+#define IOC3_SIO_UA_BASE	(IOC3_SIO_BASE+UARTA_BASE)	/* UART A */
+
+/* SSRAM Diagnostic Access */
+#define IOC3_SSRAM	IOC3_RAM_OFF	/* base of SSRAM diagnostic access */
+#define IOC3_SSRAM_LEN	0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_DM	0x0000ffff	/* data mask */
+#define IOC3_SSRAM_PM	0x00010000	/* parity mask */
+
+/* bitmasks for PCI_SCR */
+#define PCI_SCR_PAR_RESP_EN	0x00000040	/* enb PCI parity checking */
+#define PCI_SCR_SERR_EN		0x00000100	/* enable the SERR# driver */
+#define PCI_SCR_DROP_MODE_EN	0x00008000	/* drop pios on parity err */
+#define PCI_SCR_RX_SERR		(0x1 << 16)
+#define PCI_SCR_DROP_MODE	(0x1 << 17)
+#define PCI_SCR_SIG_PAR_ERR	(0x1 << 24)
+#define PCI_SCR_SIG_TAR_ABRT	(0x1 << 27)
+#define PCI_SCR_RX_TAR_ABRT	(0x1 << 28)
+#define PCI_SCR_SIG_MST_ABRT	(0x1 << 29)
+#define PCI_SCR_SIG_SERR	(0x1 << 30)
+#define PCI_SCR_PAR_ERR		(0x1 << 31)
+
+/* bitmasks for IOC3_KM_CSR */
+#define KM_CSR_K_WRT_PEND 0x00000001	/* kbd port xmitting or resetting */
+#define KM_CSR_M_WRT_PEND 0x00000002	/* mouse port xmitting or resetting */
+#define KM_CSR_K_LCB	  0x00000004	/* Line Cntrl Bit for last KBD write */
+#define KM_CSR_M_LCB	  0x00000008	/* same for mouse */
+#define KM_CSR_K_DATA	  0x00000010	/* state of kbd data line */
+#define KM_CSR_K_CLK	  0x00000020	/* state of kbd clock line */
+#define KM_CSR_K_PULL_DATA 0x00000040	/* pull kbd data line low */
+#define KM_CSR_K_PULL_CLK 0x00000080	/* pull kbd clock line low */
+#define KM_CSR_M_DATA	  0x00000100	/* state of ms data line */
+#define KM_CSR_M_CLK	  0x00000200	/* state of ms clock line */
+#define KM_CSR_M_PULL_DATA 0x00000400	/* pull ms data line low */
+#define KM_CSR_M_PULL_CLK 0x00000800	/* pull ms clock line low */
+#define KM_CSR_EMM_MODE	  0x00001000	/* emulation mode */
+#define KM_CSR_SIM_MODE	  0x00002000	/* clock X8 */
+#define KM_CSR_K_SM_IDLE  0x00004000	/* Keyboard is idle */
+#define KM_CSR_M_SM_IDLE  0x00008000	/* Mouse is idle */
+#define KM_CSR_K_TO	  0x00010000	/* Keyboard trying to send/receive */
+#define KM_CSR_M_TO	  0x00020000	/* Mouse trying to send/receive */
+#define KM_CSR_K_TO_EN	  0x00040000	/* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_M_TO_EN	  0x00080000	/* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_K_CLAMP_ONE	0x00100000	/* Pull K_CLK low after rec. one char */
+#define KM_CSR_M_CLAMP_ONE	0x00200000	/* Pull M_CLK low after rec. one char */
+#define KM_CSR_K_CLAMP_THREE	0x00400000	/* Pull K_CLK low after rec. three chars */
+#define KM_CSR_M_CLAMP_THREE	0x00800000	/* Pull M_CLK low after rec. three char */
+
+/* bitmasks for IOC3_K_RD and IOC3_M_RD */
+#define KM_RD_DATA_2	0x000000ff	/* 3rd char recvd since last read */
+#define KM_RD_DATA_2_SHIFT 0
+#define KM_RD_DATA_1	0x0000ff00	/* 2nd char recvd since last read */
+#define KM_RD_DATA_1_SHIFT 8
+#define KM_RD_DATA_0	0x00ff0000	/* 1st char recvd since last read */
+#define KM_RD_DATA_0_SHIFT 16
+#define KM_RD_FRAME_ERR_2 0x01000000	/*  framing or parity error in byte 2 */
+#define KM_RD_FRAME_ERR_1 0x02000000	/* same for byte 1 */
+#define KM_RD_FRAME_ERR_0 0x04000000	/* same for byte 0 */
+
+#define KM_RD_KBD_MSE	0x08000000	/* 0 if from kbd, 1 if from mouse */
+#define KM_RD_OFLO	0x10000000	/* 4th char recvd before this read */
+#define KM_RD_VALID_2	0x20000000	/* DATA_2 valid */
+#define KM_RD_VALID_1	0x40000000	/* DATA_1 valid */
+#define KM_RD_VALID_0	0x80000000	/* DATA_0 valid */
+#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2)
+
+/* bitmasks for IOC3_K_WD & IOC3_M_WD */
+#define KM_WD_WRT_DATA	0x000000ff	/* write to keyboard/mouse port */
+#define KM_WD_WRT_DATA_SHIFT 0
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN	0x01	/* char(s) lost */
+#define RXSB_PAR_ERR	0x02	/* parity error */
+#define RXSB_FRAME_ERR	0x04	/* framing error */
+#define RXSB_BREAK	0x08	/* break character */
+#define RXSB_CTS	0x10	/* state of CTS */
+#define RXSB_DCD	0x20	/* state of DCD */
+#define RXSB_MODEM_VALID 0x40	/* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID 0x80	/* data byte, FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
+#define TXCB_INVALID	0x00	/* byte is invalid */
+#define TXCB_VALID	0x40	/* byte is valid */
+#define TXCB_MCR	0x80	/* data<7:0> to modem control register */
+#define TXCB_DELAY	0xc0	/* delay data<7:0> mSec */
+
+/* bitmasks for IOC3_SBBR_L */
+#define SBBR_L_SIZE	0x00000001	/* 0 == 1KB rings, 1 == 4KB rings */
+#define SBBR_L_BASE	0xfffff000	/* lower serial ring base addr */
+
+/* bitmasks for IOC3_SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD 0x000001ff	/* hiwater mark */
+#define SSCR_TX_TIMER_BUSY 0x00010000	/* TX timer in progress */
+#define SSCR_HFC_EN	0x00020000	/* hardware flow control enabled */
+#define SSCR_RX_RING_DCD 0x00040000	/* post RX record on delta-DCD */
+#define SSCR_RX_RING_CTS 0x00080000	/* post RX record on delta-CTS */
+#define SSCR_HIGH_SPD	0x00100000	/* 4X speed */
+#define SSCR_DIAG	0x00200000	/* bypass clock divider for sim */
+#define SSCR_RX_DRAIN	0x08000000	/* drain RX buffer to memory */
+#define SSCR_DMA_EN	0x10000000	/* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE	0x20000000	/* pause DMA */
+#define SSCR_PAUSE_STATE 0x40000000	/* sets when PAUSE takes effect */
+#define SSCR_RESET	0x80000000	/* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K 0x00000ff8	/* for 4K buffers */
+#define PROD_CONS_PTR_1K 0x000003f8	/* for 1K buffers */
+#define PROD_CONS_PTR_OFF 3
+
+/* bitmasks for IOC3_SRCIR_<A:B> */
+#define SRCIR_ARM	0x80000000	/* arm RX timer */
+
+/* bitmasks for IOC3_SRPIR_<A:B> */
+#define SRPIR_BYTE_CNT	0x07000000	/* bytes in packer */
+#define SRPIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_STCIR_<A:B> */
+#define STCIR_BYTE_CNT	0x0f000000	/* bytes in unpacker */
+#define STCIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_SHADOW_<A:B> */
+#define SHADOW_DR	0x00000001	/* data ready */
+#define SHADOW_OE	0x00000002	/* overrun error */
+#define SHADOW_PE	0x00000004	/* parity error */
+#define SHADOW_FE	0x00000008	/* framing error */
+#define SHADOW_BI	0x00000010	/* break interrupt */
+#define SHADOW_THRE	0x00000020	/* transmit holding register empty */
+#define SHADOW_TEMT	0x00000040	/* transmit shift register empty */
+#define SHADOW_RFCE	0x00000080	/* char in RX fifo has an error */
+#define SHADOW_DCTS	0x00010000	/* delta clear to send */
+#define SHADOW_DDCD	0x00080000	/* delta data carrier detect */
+#define SHADOW_CTS	0x00100000	/* clear to send */
+#define SHADOW_DCD	0x00800000	/* data carrier detect */
+#define SHADOW_DTR	0x01000000	/* data terminal ready */
+#define SHADOW_RTS	0x02000000	/* request to send */
+#define SHADOW_OUT1	0x04000000	/* 16550 OUT1 bit */
+#define SHADOW_OUT2	0x08000000	/* 16550 OUT2 bit */
+#define SHADOW_LOOP	0x10000000	/* loopback enabled */
+
+/* bitmasks for IOC3_SRTR_<A:B> */
+#define SRTR_CNT	0x00000fff	/* reload value for RX timer */
+#define SRTR_CNT_VAL	0x0fff0000	/* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT 16
+#define SRTR_HZ		16000	/* SRTR clock frequency */
+
+/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES  */
+#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
+#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
+#define SIO_IR_SB_TX_MT		0x00000200	/* */
+#define SIO_IR_SB_RX_FULL	0x00000400	/* */
+#define SIO_IR_SB_RX_HIGH	0x00000800	/* */
+#define SIO_IR_SB_RX_TIMER	0x00001000	/* */
+#define SIO_IR_SB_DELTA_DCD	0x00002000	/* */
+#define SIO_IR_SB_DELTA_CTS	0x00004000	/* */
+#define SIO_IR_SB_INT		0x00008000	/* */
+#define SIO_IR_SB_TX_EXPLICIT	0x00010000	/* */
+#define SIO_IR_SB_MEMERR	0x00020000	/* */
+#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
+#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
+#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
+#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
+#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
+#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
+#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT	28
+
+/* per device interrupt masks */
+#define SIO_IR_SA		(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \
+				 SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \
+				 SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \
+				 SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \
+				 SIO_IR_SA_MEMERR)
+#define SIO_IR_SB		(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \
+				 SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \
+				 SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \
+				 SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \
+				 SIO_IR_SB_MEMERR)
+#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* macro to load pending interrupts */
+#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
+				 PCI_INW(&((mem)->sio_ies_ro)))
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_SIO_RESET	0x00000001	/* reset the SIO */
+#define SIO_CR_SER_A_BASE	0x000000fe	/* DMA poll addr port A */
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE	0x00007f00	/* DMA poll addr port B */
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_SR_CMD_PULSE	0x00078000	/* byte bus strobe length */
+#define SIO_CR_CMD_PULSE_SHIFT	15
+#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA	0x00000000
+#define SIO_CR_ARB_DIAG_RXA	0x00080000
+#define SIO_CR_ARB_DIAG_TXB	0x00100000
+#define SIO_CR_ARB_DIAG_RXB	0x00180000
+#define SIO_CR_ARB_DIAG_PP	0x00200000
+#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
+
+/* bitmasks for INT_OUT */
+#define INT_OUT_COUNT	0x0000ffff	/* pulse interval timer */
+#define INT_OUT_MODE	0x00070000	/* mode mask */
+#define INT_OUT_MODE_0	0x00000000	/* set output to 0 */
+#define INT_OUT_MODE_1	0x00040000	/* set output to 1 */
+#define INT_OUT_MODE_1PULSE 0x00050000	/* send 1 pulse */
+#define INT_OUT_MODE_PULSES 0x00060000	/* send 1 pulse every interval */
+#define INT_OUT_MODE_SQW 0x00070000	/* toggle output every interval */
+#define INT_OUT_DIAG	0x40000000	/* diag mode */
+#define INT_OUT_INT_OUT 0x80000000	/* current state of INT_OUT */
+
+/* time constants for INT_OUT */
+#define INT_OUT_NS_PER_TICK (30 * 260)	/* 30 ns PCI clock, divisor=260 */
+#define INT_OUT_TICKS_PER_PULSE 3	/* outgoing pulse lasts 3 ticks */
+#define INT_OUT_US_TO_COUNT(x)		/* convert uS to a count value */ \
+	(((x) * 10 + INT_OUT_NS_PER_TICK / 200) *	\
+	 100 / INT_OUT_NS_PER_TICK - 1)
+#define INT_OUT_COUNT_TO_US(x)		/* convert count value to uS */ \
+	(((x) + 1) * INT_OUT_NS_PER_TICK / 1000)
+#define INT_OUT_MIN_TICKS 3	/* min period is width of pulse in "ticks" */
+#define INT_OUT_MAX_TICKS INT_OUT_COUNT		/* largest possible count */
+
+/* bitmasks for GPCR */
+#define GPCR_DIR	0x000000ff	/* tristate pin input or output */
+#define GPCR_DIR_PIN(x) (1<<(x))	/* access one of the DIR bits */
+#define GPCR_EDGE	0x000f0000	/* extint edge or level sensitive */
+#define GPCR_EDGE_PIN(x) (1<<((x)+15))	/* access one of the EDGE bits */
+
+/* values for GPCR */
+#define GPCR_INT_OUT_EN 0x00100000	/* enable INT_OUT to pin 0 */
+#define GPCR_MLAN_EN	0x00200000	/* enable MCR to pin 8 */
+#define GPCR_DIR_SERA_XCVR 0x00000080	/* Port A Transceiver select enable */
+#define GPCR_DIR_SERB_XCVR 0x00000040	/* Port B Transceiver select enable */
+#define GPCR_DIR_PHY_RST   0x00000020	/* ethernet PHY reset enable */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin controlling uart b mode select */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin controlling uart a mode select */
+
+#define EMCR_DUPLEX		0x00000001
+#define EMCR_PROMISC		0x00000002
+#define EMCR_PADEN		0x00000004
+#define EMCR_RXOFF_MASK		0x000001f8
+#define EMCR_RXOFF_SHIFT	3
+#define EMCR_RAMPAR		0x00000200
+#define EMCR_BADPAR		0x00000800
+#define EMCR_BUFSIZ		0x00001000
+#define EMCR_TXDMAEN		0x00002000
+#define EMCR_TXEN		0x00004000
+#define EMCR_RXDMAEN		0x00008000
+#define EMCR_RXEN		0x00010000
+#define EMCR_LOOPBACK		0x00020000
+#define EMCR_ARB_DIAG		0x001c0000
+#define EMCR_ARB_DIAG_IDLE	0x00200000
+#define EMCR_RST		0x80000000
+
+#define EISR_RXTIMERINT		0x00000001
+#define EISR_RXTHRESHINT	0x00000002
+#define EISR_RXOFLO		0x00000004
+#define EISR_RXBUFOFLO		0x00000008
+#define EISR_RXMEMERR		0x00000010
+#define EISR_RXPARERR		0x00000020
+#define EISR_TXEMPTY		0x00010000
+#define EISR_TXRTRY		0x00020000
+#define EISR_TXEXDEF		0x00040000
+#define EISR_TXLCOL		0x00080000
+#define EISR_TXGIANT		0x00100000
+#define EISR_TXBUFUFLO		0x00200000
+#define EISR_TXEXPLICIT		0x00400000
+#define EISR_TXCOLLWRAP		0x00800000
+#define EISR_TXDEFERWRAP	0x01000000
+#define EISR_TXMEMERR		0x02000000
+#define EISR_TXPARERR		0x04000000
+
+#define ERCSR_THRESH_MASK	0x000001ff	/* enet RX threshold */
+#define ERCSR_RX_TMR		0x40000000	/* simulation only */
+#define ERCSR_DIAG_OFLO		0x80000000	/* simulation only */
+
+#define ERBR_ALIGNMENT		4096
+#define ERBR_L_RXRINGBASE_MASK	0xfffff000
+
+#define ERBAR_BARRIER_BIT	0x0100
+#define ERBAR_RXBARR_MASK	0xffff0000
+#define ERBAR_RXBARR_SHIFT	16
+
+#define ERCIR_RXCONSUME_MASK	0x00000fff
+
+#define ERPIR_RXPRODUCE_MASK	0x00000fff
+#define ERPIR_ARM		0x80000000
+
+#define ERTR_CNT_MASK		0x000007ff
+
+#define ETCSR_IPGT_MASK		0x0000007f
+#define ETCSR_IPGR1_MASK	0x00007f00
+#define ETCSR_IPGR1_SHIFT	8
+#define ETCSR_IPGR2_MASK	0x007f0000
+#define ETCSR_IPGR2_SHIFT	16
+#define ETCSR_NOTXCLK		0x80000000
+
+#define ETCDC_COLLCNT_MASK	0x0000ffff
+#define ETCDC_DEFERCNT_MASK	0xffff0000
+#define ETCDC_DEFERCNT_SHIFT	16
+
+#define ETBR_ALIGNMENT		(64*1024)
+#define ETBR_L_RINGSZ_MASK	0x00000001
+#define ETBR_L_RINGSZ128	0
+#define ETBR_L_RINGSZ512	1
+#define ETBR_L_TXRINGBASE_MASK	0xffffc000
+
+#define ETCIR_TXCONSUME_MASK	0x0000ffff
+#define ETCIR_IDLE		0x80000000
+
+#define ETPIR_TXPRODUCE_MASK	0x0000ffff
+
+#define EBIR_TXBUFPROD_MASK	0x0000001f
+#define EBIR_TXBUFCONS_MASK	0x00001f00
+#define EBIR_TXBUFCONS_SHIFT	8
+#define EBIR_RXBUFPROD_MASK	0x007fc000
+#define EBIR_RXBUFPROD_SHIFT	14
+#define EBIR_RXBUFCONS_MASK	0xff800000
+#define EBIR_RXBUFCONS_SHIFT	23
+
+#define MICR_REGADDR_MASK	0x0000001f
+#define MICR_PHYADDR_MASK	0x000003e0
+#define MICR_PHYADDR_SHIFT	5
+#define MICR_READTRIG		0x00000400
+#define MICR_BUSY		0x00000800
+
+#define MIDR_DATA_MASK		0x0000ffff
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+typedef enum ioc3_subdevs_e {
+    ioc3_subdev_ether,
+    ioc3_subdev_generic,
+    ioc3_subdev_nic,
+    ioc3_subdev_kbms,
+    ioc3_subdev_ttya,
+    ioc3_subdev_ttyb,
+    ioc3_subdev_ecpp,
+    ioc3_subdev_rt,
+    ioc3_nsubdevs
+} ioc3_subdev_t;
+
+/* subdevice disable bits,
+ * from the standard INFO_LBL_SUBDEVS
+ */
+#define IOC3_SDB_ETHER		(1<<ioc3_subdev_ether)
+#define IOC3_SDB_GENERIC	(1<<ioc3_subdev_generic)
+#define IOC3_SDB_NIC		(1<<ioc3_subdev_nic)
+#define IOC3_SDB_KBMS		(1<<ioc3_subdev_kbms)
+#define IOC3_SDB_TTYA		(1<<ioc3_subdev_ttya)
+#define IOC3_SDB_TTYB		(1<<ioc3_subdev_ttyb)
+#define IOC3_SDB_ECPP		(1<<ioc3_subdev_ecpp)
+#define IOC3_SDB_RT		(1<<ioc3_subdev_rt)
+
+#define IOC3_ALL_SUBDEVS	((1<<ioc3_nsubdevs)-1)
+
+#define IOC3_SDB_SERIAL		(IOC3_SDB_TTYA|IOC3_SDB_TTYB)
+
+#define IOC3_STD_SUBDEVS	IOC3_ALL_SUBDEVS
+
+#define IOC3_INTA_SUBDEVS	IOC3_SDB_ETHER
+#define IOC3_INTB_SUBDEVS	(IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
+
+#endif /* _IOC3_H */
diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h
new file mode 100644
index 000000000000..d028e28d6239
--- /dev/null
+++ b/include/asm-mips/sn/klconfig.h
@@ -0,0 +1,980 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_KLCONFIG_H
+#define	_ASM_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+/*
+ * WARNING:
+ *	Certain assembly language routines (notably xxxxx.s) in the IP27PROM
+ *	will depend on the format of the data structures in this file.  In
+ *      most cases, rearranging the fields can seriously break things.
+ *      Adding fields in the beginning or middle can also break things.
+ *      Add fields if necessary, to the end of a struct in such a way
+ *      that offsets of existing fields do not change.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/sn/types.h>
+
+#if defined(CONFIG_SGI_IP27)
+
+#include <asm/sn/sn0/addrs.h>
+//#include <sys/SN/router.h>
+// XXX Stolen from <sys/SN/router.h>:
+#define MAX_ROUTER_PORTS (6)    /* Max. number of ports on a router */
+#include <asm/sn/sn0/sn0_fru.h>
+//#include <sys/graph.h>
+//#include <sys/xtalk/xbow.h>
+
+#elif defined(CONFIG_SGI_IP35)
+
+#include <asm/sn/sn1/addrs.h>
+#include <sys/sn/router.h>
+#include <sys/graph.h>
+#include <asm/xtalk/xbow.h>
+
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
+#include <asm/sn/agent.h>
+#include <asm/arc/types.h>
+#include <asm/arc/hinv.h>
+#if defined(CONFIG_SGI_IO) || defined(CONFIG_SGI_IP35)
+// The hack file has to be before vector and after sn0_fru....
+#include <asm/hack.h>
+#include <asm/sn/vector.h>
+#include <asm/xtalk/xtalk.h>
+#endif /* CONFIG_SGI_IO || CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+
+#define KLCFGINFO_MAGIC	0xbeedbabe
+
+#ifdef FRUTEST
+typedef u64 klconf_off_t;
+#else
+typedef s32 klconf_off_t;
+#endif
+
+/*
+ * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
+ */
+#if 0
+#define RAMBASE                 0
+#define ARCSSPB_OFF             0x1000 /* shift it to sys/arcs/spb.h */
+
+#define OFF_HWGRAPH 		0
+#endif
+
+#define	MAX_MODULE_ID		255
+#define SIZE_PAD		4096 /* 4k padding for structures */
+/*
+ * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
+ * 2 Midplanes assuming no pci card cages
+ */
+#define MAX_SLOTS_PER_NODE	(1 + 2 + 6 + 2)
+
+/* XXX if each node is guranteed to have some memory */
+
+#define MAX_PCI_DEVS		8
+
+/* lboard_t->brd_flags fields */
+/* All bits in this field are currently used. Try the pad fields if
+   you need more flag bits */
+
+#define ENABLE_BOARD 		0x01
+#define FAILED_BOARD  		0x02
+#define DUPLICATE_BOARD 	0x04    /* Boards like midplanes/routers which
+                                   	   are discovered twice. Use one of them */
+#define VISITED_BOARD		0x08	/* Used for compact hub numbering. */
+#define LOCAL_MASTER_IO6	0x10 	/* master io6 for that node */
+#define GLOBAL_MASTER_IO6	0x20
+#define THIRD_NIC_PRESENT 	0x40  	/* for future use */
+#define SECOND_NIC_PRESENT 	0x80 	/* addons like MIO are present */
+
+/* klinfo->flags fields */
+
+#define KLINFO_ENABLE 		0x01    /* This component is enabled */
+#define KLINFO_FAILED   	0x02 	/* This component failed */
+#define KLINFO_DEVICE   	0x04 	/* This component is a device */
+#define KLINFO_VISITED  	0x08 	/* This component has been visited */
+#define KLINFO_CONTROLLER   	0x10 	/* This component is a device controller */
+#define KLINFO_INSTALL   	0x20  	/* Install a driver */
+#define	KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
+#define IS_CONSOLE_IOC3(i)	((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
+
+#define GB2		0x80000000
+
+#define MAX_RSV_PTRS	32
+
+/* Structures to manage various data storage areas */
+/* The numbers must be contiguous since the array index i
+   is used in the code to allocate various areas.
+*/
+
+#define BOARD_STRUCT 		0
+#define COMPONENT_STRUCT 	1
+#define ERRINFO_STRUCT 		2
+#define KLMALLOC_TYPE_MAX 	(ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT 		3
+
+
+typedef struct console_s {
+#if defined(CONFIG_SGI_IO)	/* FIXME */
+	__psunsigned_t 	uart_base;
+	__psunsigned_t 	config_base;
+	__psunsigned_t 	memory_base;
+#else
+	unsigned long 	uart_base;
+	unsigned long 	config_base;
+	unsigned long 	memory_base;
+#endif
+	short		baud;
+	short		flag;
+	int		type;
+	nasid_t		nasid;
+	char		wid;
+	char 		npci;
+	nic_t		baseio_nic;
+} console_t;
+
+typedef struct klc_malloc_hdr {
+        klconf_off_t km_base;
+        klconf_off_t km_limit;
+        klconf_off_t km_current;
+} klc_malloc_hdr_t;
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	u64		ch_magic;	/* set this to KLCFGINFO_MAGIC */
+	u32		ch_version;    /* structure version number */
+	klconf_off_t	ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
+	klconf_off_t	ch_cons_off;       /* offset of ch_cons */
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	console_t	ch_cons_info;	/* address info of the console */
+	klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
+	confidence_t	ch_sw_belief;	/* confidence that software is bad*/
+	confidence_t	ch_sn0net_belief; /* confidence that sn0net is bad */
+} kl_config_hdr_t;
+
+
+#define KL_CONFIG_HDR(_nasid) 	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#if 0
+#define KL_CONFIG_MALLOC_HDR(_nasid) \
+                                (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr)
+#endif
+#define KL_CONFIG_INFO_OFFSET(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info)
+#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+
+#define KL_CONFIG_INFO(_nasid) 						\
+        (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
+	 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
+	 0)
+#define KL_CONFIG_MAGIC(_nasid)		(KL_CONFIG_HDR(_nasid)->ch_magic)
+
+#define KL_CONFIG_CHECK_MAGIC(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+
+#define KL_CONFIG_HDR_INIT_MAGIC(_nasid)	\
+                  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+
+/* --- New Macros for the changed kl_config_hdr_t structure --- */
+
+#if defined(CONFIG_SGI_IO)
+#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
+			((__psunsigned_t)_k + (_k->ch_malloc_hdr_off)))
+#else
+#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
+			(unsigned long)_k + (_k->ch_malloc_hdr_off)))
+#endif
+
+#define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
+
+#if defined(CONFIG_SGI_IO)
+#define PTR_CH_CONS_INFO(_k)	((console_t *)\
+			((__psunsigned_t)_k + (_k->ch_cons_off)))
+#else
+#define PTR_CH_CONS_INFO(_k)	((console_t *)\
+			((unsigned long)_k + (_k->ch_cons_off)))
+#endif
+
+#define KL_CONFIG_CH_CONS_INFO(_n)   PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
+
+/* ------------------------------------------------------------- */
+
+#define KL_CONFIG_INFO_START(_nasid)	\
+        (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+
+#define KL_CONFIG_BOARD_NASID(_brd)	((_brd)->brd_nasid)
+#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off)	((_brd)->brd_next = (_off))
+
+#define KL_CONFIG_DUPLICATE_BOARD(_brd)	((_brd)->brd_flags & DUPLICATE_BOARD)
+
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+
+#define XBOW_PORT_IO     0x1
+#define XBOW_PORT_HUB    0x2
+#define XBOW_PORT_ENABLE 0x4
+
+#define	SN0_PORT_FENCE_SHFT	0
+#define	SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+/*
+ * Values for CPU types
+ */
+#define KL_CPU_R4000		0x1	/* Standard R4000 */
+#define KL_CPU_TFP		0x2	/* TFP processor */
+#define	KL_CPU_R10000		0x3	/* R10000 (T5) */
+#define KL_CPU_NONE		(-1)	/* no cpu present in slot */
+
+/*
+ * IP27 BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_GFX	0x50		/* graphics boards */
+
+#define KLCLASS_PSEUDO_GFX	0x60	/* HDTV type cards that use a gfx
+					 * hw ifc to xtalk and are not gfx
+					 * class for sw purposes */
+
+#define KLCLASS_MAX	7		/* Bump this if a new CLASS is added */
+#define KLTYPE_MAX	10		/* Bump this if a new CLASS is added */
+
+#define KLCLASS_UNKNOWN	0xf0
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+/*
+ * IP27 board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE_NONE	0x00
+#define KLTYPE_EMPTY	0x00
+
+#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
+#define KLTYPE_IP27	(KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
+
+#define KLTYPE_WEIRDIO	(KLCLASS_IO  | 0x0)
+#define KLTYPE_BASEIO	(KLCLASS_IO  | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
+#define KLTYPE_IO6	KLTYPE_BASEIO       /* Additional name */
+#define KLTYPE_4CHSCSI	(KLCLASS_IO  | 0x2)
+#define KLTYPE_MSCSI	KLTYPE_4CHSCSI      /* Additional name */
+#define KLTYPE_ETHERNET	(KLCLASS_IO  | 0x3)
+#define KLTYPE_MENET	KLTYPE_ETHERNET     /* Additional name */
+#define KLTYPE_FDDI  	(KLCLASS_IO  | 0x4)
+#define KLTYPE_UNUSED	(KLCLASS_IO  | 0x5) /* XXX UNUSED */
+#define KLTYPE_HAROLD   (KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_PCI	KLTYPE_HAROLD
+#define KLTYPE_VME      (KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO   	(KLCLASS_IO  | 0x8)
+#define KLTYPE_FC    	(KLCLASS_IO  | 0x9)
+#define KLTYPE_LINC    	(KLCLASS_IO  | 0xA)
+#define KLTYPE_TPU    	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A   	(KLCLASS_IO  | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B   	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
+
+#define KLTYPE_GFX	(KLCLASS_GFX | 0x0) /* unknown graphics type */
+#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
+#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
+
+#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2    KLTYPE_ROUTER		/* Obsolete! */
+#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+
+#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
+#define KLTYPE_MIDPLANE8  (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
+#define KLTYPE_MIDPLANE    KLTYPE_MIDPLANE8
+#define KLTYPE_PBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_IBRICK		(KLCLASS_IOBRICK | 0x1)
+#define KLTYPE_PBRICK		(KLCLASS_IOBRICK | 0x2)
+#define KLTYPE_XBRICK		(KLCLASS_IOBRICK | 0x3)
+
+#define KLTYPE_PBRICK_BRIDGE	KLTYPE_PBRICK
+
+/* The value of type should be more than 8 so that hinv prints
+ * out the board name from the NIC string. For values less than
+ * 8 the name of the board needs to be hard coded in a few places.
+ * When bringup started nic names had not standardized and so we
+ * had to hard code. (For people interested in history.)
+ */
+#define KLTYPE_XTHD   	(KLCLASS_PSEUDO_GFX | 0x9)
+
+#define KLTYPE_UNKNOWN	(KLCLASS_UNKNOWN | 0xf)
+
+#define KLTYPE(_x) 	((_x) & KLTYPE_MASK)
+#define IS_MIO_PRESENT(l)	((l->brd_type == KLTYPE_BASEIO) && \
+				 (l->brd_flags & SECOND_NIC_PRESENT))
+#define IS_MIO_IOC3(l,n)	(IS_MIO_PRESENT(l) && (n > 2))
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+#define LOCAL_BOARD 1
+#define REMOTE_BOARD 2
+
+#define LBOARD_STRUCT_VERSION 	2
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next;         /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+ 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	moduleid_t	brd_module;       /* module to which it belongs */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	vertex_hdl_t	brd_graph_link;   /* vertex hdl to connect extern compts */
+	confidence_t	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		brd_name[32];
+} lboard_t;
+
+
+/*
+ *	Make sure we pass back the calias space address for local boards.
+ *	klconfig board traversal and error structure extraction defines.
+ */
+
+#define BOARD_SLOT(_brd)	((_brd)->brd_slot)
+
+#define KLCF_CLASS(_brd)	KLCLASS((_brd)->brd_type)
+#define KLCF_TYPE(_brd)		KLTYPE((_brd)->brd_type)
+#define KLCF_REMOTE(_brd)  	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
+#define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
+
+#ifdef FRUTEST
+
+#define KLCF_NEXT(_brd) 		((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next):  NULL)
+#define KLCF_COMP(_brd, _ndx)   	(klinfo_t *)((_brd)->brd_compts[(_ndx)])
+#define KLCF_COMP_ERROR(_brd, _comp)   	(_brd = _brd , (_comp)->errinfo)
+
+#else
+
+#define KLCF_NEXT(_brd) 	\
+        ((_brd)->brd_next ? 	\
+	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
+	 NULL)
+#define KLCF_COMP(_brd, _ndx)   \
+                (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd),	\
+					       (_brd)->brd_compts[(_ndx)]))
+
+#define KLCF_COMP_ERROR(_brd, _comp)	\
+               (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+
+#endif
+
+#define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
+#define KLCF_BRIDGE_W_ID(_comp)	((_comp)->physid)	/* Widget ID */
+
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	COMPONENT	*arcs_compt;      /* ptr to the arcs struct for ease*/
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+#define KLCONFIG_INFO_ENABLED(_i)	((_i)->flags & KLINFO_ENABLE)
+/*
+ * Component structures.
+ * Following are the currently identified components:
+ * 	CPU, HUB, MEM_BANK,
+ * 	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ * 	BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ * 	ROUTER
+ * 	GRAPHICS
+ */
+#define KLSTRUCT_UNKNOWN	0
+#define KLSTRUCT_CPU  		1
+#define KLSTRUCT_HUB  		2
+#define KLSTRUCT_MEMBNK 	3
+#define KLSTRUCT_XBOW 		4
+#define KLSTRUCT_BRI 		5
+#define KLSTRUCT_IOC3 		6
+#define KLSTRUCT_PCI 		7
+#define KLSTRUCT_VME 		8
+#define KLSTRUCT_ROU		9
+#define KLSTRUCT_GFX 		10
+#define KLSTRUCT_SCSI 		11
+#define KLSTRUCT_FDDI 		12
+#define KLSTRUCT_MIO 		13
+#define KLSTRUCT_DISK 		14
+#define KLSTRUCT_TAPE 		15
+#define KLSTRUCT_CDROM 		16
+#define KLSTRUCT_HUB_UART 	17
+#define KLSTRUCT_IOC3ENET 	18
+#define KLSTRUCT_IOC3UART 	19
+#define KLSTRUCT_UNUSED		20 /* XXX UNUSED */
+#define KLSTRUCT_IOC3PCKM       21
+#define KLSTRUCT_RAD        	22
+#define KLSTRUCT_HUB_TTY        23
+#define KLSTRUCT_IOC3_TTY 	24
+
+/* Early Access IO proms are compatible
+   only with KLSTRUCT values upto 24. */
+
+#define KLSTRUCT_FIBERCHANNEL 	25
+#define KLSTRUCT_MOD_SERIAL_NUM 26
+#define KLSTRUCT_IOC3MS         27
+#define KLSTRUCT_TPU            28
+#define KLSTRUCT_GSN_A          29
+#define KLSTRUCT_GSN_B          30
+#define KLSTRUCT_XTHD           31
+
+/*
+ * These are the indices of various components within a lboard structure.
+ */
+
+#define IP27_CPU0_INDEX 0
+#define IP27_CPU1_INDEX 1
+#define IP27_HUB_INDEX 2
+#define IP27_MEM_INDEX 3
+
+#define BASEIO_BRIDGE_INDEX 0
+#define BASEIO_IOC3_INDEX 1
+#define BASEIO_SCSI1_INDEX 2
+#define BASEIO_SCSI2_INDEX 3
+
+#define MIDPLANE_XBOW_INDEX 0
+#define ROUTER_COMPONENT_INDEX 0
+
+#define CH4SCSI_BRIDGE_INDEX 0
+
+/* Info holders for various hardware components */
+
+typedef u64 *pci_t;
+typedef u64 *vmeb_t;
+typedef u64 *vmed_t;
+typedef u64 *fddi_t;
+typedef u64 *scsi_t;
+typedef u64 *mio_t;
+typedef u64 *graphics_t;
+typedef u64 *router_t;
+
+/*
+ * The port info in ip27_cfg area translates to a lboart_t in the
+ * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
+ * is stored in terms of a nasid and a offset from start of KLCONFIG
+ * area  on that nasid.
+ */
+typedef struct klport_s {
+	nasid_t		port_nasid;
+	unsigned char	port_flag;
+	klconf_off_t	port_offset;
+} klport_t;
+
+#if 0
+/*
+ * This is very similar to the klport_s but instead of having a componant
+ * offset it has a board offset.
+ */
+typedef struct klxbow_port_s {
+	nasid_t		port_nasid;
+	unsigned char	port_flag;
+	klconf_off_t	board_offset;
+} klxbow_port_t;
+#endif
+
+typedef struct klcpu_s {                          /* CPU */
+	klinfo_t 	cpu_info;
+	unsigned short 	cpu_prid;	/* Processor PRID value */
+	unsigned short 	cpu_fpirr;	/* FPU IRR value */
+    	unsigned short 	cpu_speed;	/* Speed in MHZ */
+    	unsigned short 	cpu_scachesz;	/* secondary cache size in MB */
+    	unsigned short 	cpu_scachespeed;/* secondary cache speed in MHz */
+} klcpu_t ;
+
+#define CPU_STRUCT_VERSION   2
+
+typedef struct klhub_s {			/* HUB */
+	klinfo_t 	hub_info;
+	uint 		hub_flags;		/* PCFG_HUB_xxx flags */
+	klport_t	hub_port;		/* hub is connected to this */
+	nic_t		hub_box_nic;		/* nic of containing box */
+	klconf_off_t	hub_mfg_nic;		/* MFG NIC string */
+	u64		hub_speed;		/* Speed of hub in HZ */
+} klhub_t ;
+
+typedef struct klhub_uart_s {			/* HUB */
+	klinfo_t 	hubuart_info;
+	uint 		hubuart_flags;		/* PCFG_HUB_xxx flags */
+	nic_t		hubuart_box_nic;	/* nic of containing box */
+} klhub_uart_t ;
+
+#define MEMORY_STRUCT_VERSION   2
+
+typedef struct klmembnk_s {			/* MEMORY BANK */
+	klinfo_t 	membnk_info;
+    	short 		membnk_memsz;		/* Total memory in megabytes */
+	short		membnk_dimm_select; /* bank to physical addr mapping*/
+	short		membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
+	short		membnk_attr;
+} klmembnk_t ;
+
+#define KLCONFIG_MEMBNK_SIZE(_info, _bank)	\
+                            ((_info)->membnk_bnksz[(_bank)])
+
+
+#define MEMBNK_PREMIUM 1
+#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank)	\
+                            ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+
+#define MAX_SERIAL_NUM_SIZE 10
+
+typedef struct klmod_serial_num_s {
+      klinfo_t        snum_info;
+      union {
+              char snum_str[MAX_SERIAL_NUM_SIZE];
+              unsigned long long       snum_int;
+      } snum;
+} klmod_serial_num_t;
+
+/* Macros needed to access serial number structure in lboard_t.
+   Hard coded values are necessary since we cannot treat
+   serial number struct as a component without losing compatibility
+   between prom versions. */
+
+#define GET_SNUM_COMP(_l) 	((klmod_serial_num_t *)\
+				KLCF_COMP(_l, _l->brd_numcompts))
+
+#define MAX_XBOW_LINKS 16
+
+typedef struct klxbow_s {                          /* XBOW */
+	klinfo_t 	xbow_info ;
+    	klport_t	xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
+        int		xbow_master_hub_link;
+        /* type of brd connected+component struct ptr+flags */
+} klxbow_t ;
+
+#define MAX_PCI_SLOTS 8
+
+typedef struct klpci_device_s {
+	s32	pci_device_id;	/* 32 bits of vendor/device ID. */
+	s32	pci_device_pad;	/* 32 bits of padding. */
+} klpci_device_t;
+
+#define BRIDGE_STRUCT_VERSION	2
+
+typedef struct klbri_s {                          /* BRIDGE */
+	klinfo_t 	bri_info ;
+    	unsigned char	bri_eprominfo ;    /* IO6prom connected to bridge */
+    	unsigned char	bri_bustype ;      /* PCI/VME BUS bridge/GIO */
+    	pci_t    	pci_specific  ;    /* PCI Board config info */
+	klpci_device_t	bri_devices[MAX_PCI_DEVS] ;	/* PCI IDs */
+	klconf_off_t	bri_mfg_nic ;
+} klbri_t ;
+
+#define MAX_IOC3_TTY	2
+
+typedef struct klioc3_s {                          /* IOC3 */
+	klinfo_t 	ioc3_info ;
+    	unsigned char	ioc3_ssram ;        /* Info about ssram */
+    	unsigned char	ioc3_nvram ;        /* Info about nvram */
+    	klinfo_t	ioc3_superio ;      /* Info about superio */
+	klconf_off_t	ioc3_tty_off ;
+	klinfo_t	ioc3_enet ;
+	klconf_off_t	ioc3_enet_off ;
+	klconf_off_t	ioc3_kbd_off ;
+} klioc3_t ;
+
+#define MAX_VME_SLOTS 8
+
+typedef struct klvmeb_s {                          /* VME BRIDGE - PCI CTLR */
+	klinfo_t 	vmeb_info ;
+	vmeb_t		vmeb_specific ;
+    	klconf_off_t   	vmeb_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmeb_t ;
+
+typedef struct klvmed_s {                          /* VME DEVICE - VME BOARD */
+	klinfo_t	vmed_info ;
+	vmed_t		vmed_specific ;
+    	klconf_off_t   	vmed_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmed_t ;
+
+#define ROUTER_VECTOR_VERS	2
+
+/* XXX - Don't we need the number of ports here?!? */
+typedef struct klrou_s {                          /* ROUTER */
+	klinfo_t 	rou_info ;
+	uint		rou_flags ;           /* PCFG_ROUTER_xxx flags */
+	nic_t		rou_box_nic ;         /* nic of the containing module */
+    	klport_t 	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+	klconf_off_t	rou_mfg_nic ;     /* MFG NIC string */
+	u64	rou_vector;	  /* vector from master node */
+} klrou_t ;
+
+/*
+ *  Graphics Controller/Device
+ *
+ *  (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
+ *  used a couple different structures to store graphics information.
+ *  For compatibility reasons, the newer data structure preserves some
+ *  of the layout so that fields that are used in the old versions remain
+ *  in the same place (with the same info).  Determination of what version
+ *  of this structure we have is done by checking the cookie field.
+ */
+#define KLGFX_COOKIE	0x0c0de000
+
+typedef struct klgfx_s {		/* GRAPHICS Device */
+	klinfo_t 	gfx_info;
+	klconf_off_t    old_gndevs;	/* for compatibility with older proms */
+	klconf_off_t    old_gdoff0;	/* for compatibility with older proms */
+	uint		cookie;		/* for compatibility with older proms */
+	uint		moduleslot;
+	struct klgfx_s	*gfx_next_pipe;
+	graphics_t	gfx_specific;
+	klconf_off_t    pad0;		/* for compatibility with older proms */
+	klconf_off_t    gfx_mfg_nic;
+} klgfx_t;
+
+typedef struct klxthd_s {
+	klinfo_t 	xthd_info ;
+	klconf_off_t	xthd_mfg_nic ;        /* MFG NIC string */
+} klxthd_t ;
+
+typedef struct kltpu_s {                     /* TPU board */
+	klinfo_t 	tpu_info ;
+	klconf_off_t	tpu_mfg_nic ;        /* MFG NIC string */
+} kltpu_t ;
+
+typedef struct klgsn_s {                     /* GSN board */
+	klinfo_t 	gsn_info ;
+	klconf_off_t	gsn_mfg_nic ;        /* MFG NIC string */
+} klgsn_t ;
+
+#define MAX_SCSI_DEVS 16
+
+/*
+ * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
+ * to allocate space of type COMPONENT. Make sure that if the size of
+ * any other component struct becomes more than this, then redefine
+ * that as the size to be klmalloced.
+ */
+
+typedef struct klscsi_s {                          /* SCSI Controller */
+	klinfo_t 	scsi_info ;
+    	scsi_t       	scsi_specific   ;
+	unsigned char 	scsi_numdevs ;
+	klconf_off_t	scsi_devinfo[MAX_SCSI_DEVS] ;
+} klscsi_t ;
+
+typedef struct klscdev_s {                          /* SCSI device */
+	klinfo_t 	scdev_info ;
+	struct scsidisk_data *scdev_cfg ; /* driver fills up this */
+} klscdev_t ;
+
+typedef struct klttydev_s {                          /* TTY device */
+	klinfo_t 	ttydev_info ;
+	struct terminal_data *ttydev_cfg ; /* driver fills up this */
+} klttydev_t ;
+
+typedef struct klenetdev_s {                          /* ENET device */
+	klinfo_t 	enetdev_info ;
+	struct net_data *enetdev_cfg ; /* driver fills up this */
+} klenetdev_t ;
+
+typedef struct klkbddev_s {                          /* KBD device */
+	klinfo_t 	kbddev_info ;
+	struct keyboard_data *kbddev_cfg ; /* driver fills up this */
+} klkbddev_t ;
+
+typedef struct klmsdev_s {                          /* mouse device */
+        klinfo_t        msdev_info ;
+        void 		*msdev_cfg ;
+} klmsdev_t ;
+
+#define MAX_FDDI_DEVS 10 /* XXX Is this true */
+
+typedef struct klfddi_s {                          /* FDDI */
+	klinfo_t 	fddi_info ;
+    	fddi_t        	fddi_specific ;
+	klconf_off_t	fddi_devinfo[MAX_FDDI_DEVS] ;
+} klfddi_t ;
+
+typedef struct klmio_s {                          /* MIO */
+	klinfo_t 	mio_info ;
+    	mio_t       	mio_specific   ;
+} klmio_t ;
+
+
+typedef union klcomp_s {
+	klcpu_t		kc_cpu;
+	klhub_t		kc_hub;
+	klmembnk_t 	kc_mem;
+	klxbow_t  	kc_xbow;
+	klbri_t		kc_bri;
+	klioc3_t	kc_ioc3;
+	klvmeb_t	kc_vmeb;
+	klvmed_t	kc_vmed;
+	klrou_t		kc_rou;
+	klgfx_t		kc_gfx;
+	klscsi_t	kc_scsi;
+	klscdev_t	kc_scsi_dev;
+	klfddi_t	kc_fddi;
+	klmio_t		kc_mio;
+	klmod_serial_num_t kc_snum ;
+} klcomp_t;
+
+typedef union kldev_s {      /* for device structure allocation */
+	klscdev_t	kc_scsi_dev ;
+	klttydev_t	kc_tty_dev ;
+	klenetdev_t	kc_enet_dev ;
+	klkbddev_t 	kc_kbd_dev ;
+} kldev_t ;
+
+/* Data structure interface routines. TBD */
+
+/* Include launch info in this file itself? TBD */
+
+/*
+ * TBD - Can the ARCS and device driver related info also be included in the
+ * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
+ * structure, viz private to the IO4prom.
+ */
+
+/*
+ * TBD - Allocation issues.
+ *
+ * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * errinfo and allocate from them, or have a single heap and allocate all
+ * structures from it. Debug is easier in the former method since we can
+ * dump all similar structs in one command, but there will be lots of holes,
+ * in memory and max limits are needed for number of structures.
+ * Another way to make it organized, is to have a union of all components
+ * and allocate a aligned chunk of memory greater than the biggest
+ * component.
+ */
+
+typedef union {
+	lboard_t *lbinfo ;
+} biptr_t ;
+
+
+#define BRI_PER_XBOW 6
+#define PCI_PER_BRI  8
+#define DEV_PER_PCI  16
+
+
+/* Virtual dipswitch values (starting from switch "7"): */
+
+#define VDS_NOGFX		0x8000	/* Don't enable gfx and autoboot */
+#define VDS_NOMP		0x100	/* Don't start slave processors */
+#define VDS_MANUMODE		0x80	/* Manufacturing mode */
+#define VDS_NOARB		0x40	/* No bootmaster arbitration */
+#define VDS_PODMODE		0x20	/* Go straight to POD mode */
+#define VDS_NO_DIAGS		0x10	/* Don't run any diags after BM arb */
+#define VDS_DEFAULTS		0x08	/* Use default environment values */
+#define VDS_NOMEMCLEAR		0x04	/* Don't run mem cfg code */
+#define VDS_2ND_IO4		0x02	/* Boot from the second IO4 */
+#define VDS_DEBUG_PROM		0x01	/* Print PROM debugging messages */
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
+extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
+
+
+#if defined(CONFIG_SGI_IO)
+extern xwidgetnum_t nodevertex_widgetnum_get(vertex_hdl_t node_vtx);
+extern vertex_hdl_t nodevertex_xbow_peer_get(vertex_hdl_t node_vtx);
+extern lboard_t *find_gfxpipe(int pipenum);
+extern void setup_gfxpipe_link(vertex_hdl_t vhdl,int pipenum);
+extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod,
+                                               unsigned char brd_class);
+extern lboard_t *find_nic_lboard(lboard_t *, nic_t);
+extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t);
+extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot);
+extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod);
+extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name);
+extern int	config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**);
+extern int	config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**);
+extern int	config_find_xbow(nasid_t, lboard_t **, klxbow_t**);
+extern klcpu_t *get_cpuinfo(cpuid_t cpu);
+extern int 	update_klcfg_cpuinfo(nasid_t, int);
+extern void 	board_to_path(lboard_t *brd, char *path);
+extern moduleid_t get_module_id(nasid_t nasid);
+extern void 	nic_name_convert(char *old_name, char *new_name);
+extern int 	module_brds(nasid_t nasid, lboard_t **module_brds, int n);
+extern lboard_t *brd_from_key(ulong_t key);
+extern void 	device_component_canonical_name_get(lboard_t *,klinfo_t *,
+						    char *);
+extern int	board_serial_number_get(lboard_t *,char *);
+extern int	is_master_baseio(nasid_t,moduleid_t,slotid_t);
+extern nasid_t	get_actual_nasid(lboard_t *brd) ;
+extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int);
+#else	/* CONFIG_SGI_IO */
+extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
+#endif	/* CONFIG_SGI_IO */
+
+#endif /* _ASM_SN_KLCONFIG_H */
diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h
new file mode 100644
index 000000000000..f0efab1672ec
--- /dev/null
+++ b/include/asm-mips/sn/kldir.h
@@ -0,0 +1,248 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLDIR_H
+#define _ASM_SN_KLDIR_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SGI_IO)
+#include <asm/hack.h>
+#endif
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas.  This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them.  Indices in the array are
+ * permanently dedicated to areas listed below.  Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+#define KLDIR_MAGIC		0x434d5f53505f5357
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ *                                    MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M)         +-----------------------------------------+
+ *                         |      IO6 BUFFERS FOR FLASH ENET IOC3    |
+ * 0x1F80000 (31.5M)       +-----------------------------------------+
+ *                         |      IO6 TEXT/DATA/BSS/stack            |
+ * 0x1C00000 (30M)         +-----------------------------------------+
+ *                         |      IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M)         +-----------------------------------------+
+ *                         |      IP27 PROM TEXT/DATA/BSS/stack      |
+ * 0x1B00000 (27M)         +-----------------------------------------+
+ *                         |      IP27 CFG                           |
+ * 0x1A00000 (26M)         +-----------------------------------------+
+ *                         |      Graphics PROM                      |
+ * 0x1800000 (24M)         +-----------------------------------------+
+ *                         |      3rd Party PROM drivers             |
+ * 0x1600000 (22M)         +-----------------------------------------+
+ *                         |                                         |
+ *                         |      Free                               |
+ *                         |                                         |
+ *                         +-----------------------------------------+
+ *                         |      UNIX DEBUG Version                 |
+ * 0x190000 (2M--)         +-----------------------------------------+
+ *                         |      SYMMON                             |
+ *                         |      (For UNIX Debug only)              |
+ * 0x34000 (208K)          +-----------------------------------------+
+ *                         |      SYMMON STACK [NUM_CPU_PER_NODE]    |
+ *                         |      (For UNIX Debug only)              |
+ * 0x25000 (148K)          +-----------------------------------------+
+ *                         |      KLCONFIG - II (temp)               |
+ *                         |                                         |
+ *                         |    ----------------------------         |
+ *                         |                                         |
+ *                         |      UNIX NON-DEBUG Version             |
+ * 0x19000 (100K)          +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K)          +-----------------------------------------+
+ *                         |                                         |
+ *                         |      PI Error Spools (32K)              |
+ *                         |                                         |
+ * 0x12000 (72K)           +-----------------------------------------+
+ *                         |      Unused                             |
+ * 0x11c00 (71K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Eframe area       	     |
+ * 0x11a00 (70.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Eframe area       	     |
+ * 0x11800 (70K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Register save area       |
+ * 0x11600 (69.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Register save area       |
+ * 0x11400 (69K)           +-----------------------------------------+
+ *                         |      GDA (1k)                           |
+ * 0x11000 (68K)           +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x10800  (66k)	   +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x10400 (65K)           +-----------------------------------------+
+ *                         |      Exception Handlers (UALIAS copy)   |
+ * 0x10000 (64K)           +-----------------------------------------+
+ *                         |                                         |
+ *                         |                                         |
+ *                         |      KLCONFIG - I (permanent) (48K)     |
+ *                         |                                         |
+ *                         |                                         |
+ *                         |                                         |
+ * 0x4000 (16K)            +-----------------------------------------+
+ *                         |      NMI Handler (Protected Page)       |
+ * 0x3000 (12K)            +-----------------------------------------+
+ *                         |      ARCS PVECTORS (master node only)   |
+ * 0x2c00 (11K)            +-----------------------------------------+
+ *                         |      ARCS TVECTORS (master node only)   |
+ * 0x2800 (10K)            +-----------------------------------------+
+ *                         |      LAUNCH [NUM_CPU]                   |
+ * 0x2400 (9K)             +-----------------------------------------+
+ *                         |      Low memory directory (KLDIR)       |
+ * 0x2000 (8K)             +-----------------------------------------+
+ *                         |      ARCS SPB (1K)                      |
+ * 0x1000 (4K)             +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x800  (2k)	           +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x400 (1K)              +-----------------------------------------+
+ *                         |      Exception Handlers                 |
+ * 0x0   (0K)              +-----------------------------------------+
+ */
+
+#ifdef __ASSEMBLY__
+#define KLDIR_OFF_MAGIC			0x00
+#define KLDIR_OFF_OFFSET		0x08
+#define KLDIR_OFF_POINTER		0x10
+#define KLDIR_OFF_SIZE			0x18
+#define KLDIR_OFF_COUNT			0x20
+#define KLDIR_OFF_STRIDE		0x28
+#endif /* __ASSEMBLY__ */
+
+#if !defined(CONFIG_SGI_IO)
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here.  Since it's set up in the prom.  We can't redefine it later
+ * and expect more space to be allocated.  The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE		0x8000
+
+#if defined (PROM) || defined (SABLE)
+
+/*
+ * These defines are prom version dependent.  No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET		0x2400
+#define IP27_LAUNCH_SIZE		0x400
+#define IP27_LAUNCH_COUNT		2
+#define IP27_LAUNCH_STRIDE		0x200
+
+#define IP27_KLCONFIG_OFFSET		0x4000
+#define IP27_KLCONFIG_SIZE		0xc000
+#define IP27_KLCONFIG_COUNT		1
+#define IP27_KLCONFIG_STRIDE		0
+
+#define IP27_NMI_OFFSET			0x3000
+#define IP27_NMI_SIZE			0x40
+#define IP27_NMI_COUNT			2
+#define IP27_NMI_STRIDE			0x40
+
+#define IP27_PI_ERROR_OFFSET		0x12000
+#define IP27_PI_ERROR_SIZE		0x4000
+#define IP27_PI_ERROR_COUNT		1
+#define IP27_PI_ERROR_STRIDE		0
+
+#define IP27_SYMMON_STK_OFFSET		0x25000
+#define IP27_SYMMON_STK_SIZE		0xe000
+#define IP27_SYMMON_STK_COUNT		2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE		0x7000
+
+#define IP27_FREEMEM_OFFSET		0x19000
+#define IP27_FREEMEM_SIZE		-1
+#define IP27_FREEMEM_COUNT		1
+#define IP27_FREEMEM_STRIDE		0
+
+#endif /* PROM || SABLE*/
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET			0x11000
+#define IO6_GDA_SIZE			0x400
+#define IO6_GDA_COUNT			1
+#define IO6_GDA_STRIDE			0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET		0x11400
+#define IP27_NMI_KREGS_CPU_SIZE		0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET		0x11800
+#define IP27_NMI_EFRAME_SIZE		0x200
+
+#define KLDIR_ENT_SIZE			0x40
+#define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
+
+#endif	/* !CONFIG_SGI_IO */
+
+#ifndef __ASSEMBLY__
+typedef struct kldir_ent_s {
+	u64		magic;		/* Indicates validity of entry      */
+	off_t		offset;		/* Offset from start of node space  */
+#if defined(CONFIG_SGI_IO)	/* FIXME */
+	__psunsigned_t	pointer;	/* Pointer to area in some cases    */
+#else
+	unsigned long	pointer;	/* Pointer to area in some cases    */
+#endif
+	size_t		size;		/* Size in bytes 		    */
+	u64		count;		/* Repeat count if array, 1 if not  */
+	size_t		stride;		/* Stride if array, 0 if not        */
+	char		rsvd[16];	/* Pad entry to 0x40 bytes          */
+	/* NOTE: These 16 bytes are used in the Partition KLDIR
+	   entry to store partition info. Refer to klpart.h for this. */
+} kldir_ent_t;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_SGI_IO)
+
+#define KLDIR_ENT_SIZE			0x40
+#define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
+
+/*
+ * The actual offsets of each memory area are machine-dependent
+ */
+#ifdef CONFIG_SGI_IP27
+// Not yet #include <asm/sn/sn0/kldir.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/kldir.h>
+#else
+#error "kldir.h is currently defined for IP27 and IP35 platforms only"
+#endif
+
+#endif	/* CONFIG_SGI_IO */
+
+#endif /* _ASM_SN_KLDIR_H */
diff --git a/include/asm-mips/sn/klkernvars.h b/include/asm-mips/sn/klkernvars.h
new file mode 100644
index 000000000000..5de4c5e8ab30
--- /dev/null
+++ b/include/asm-mips/sn/klkernvars.h
@@ -0,0 +1,29 @@
+/*
+ * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_KLKERNVARS_H
+#define __ASM_SN_KLKERNVARS_H
+
+#define KV_MAGIC_OFFSET		0x0
+#define KV_RO_NASID_OFFSET	0x4
+#define KV_RW_NASID_OFFSET	0x6
+
+#define KV_MAGIC		0x5f4b565f
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sn/types.h>
+
+typedef struct kern_vars_s {
+	int		kv_magic;
+	nasid_t		kv_ro_nasid;
+	nasid_t		kv_rw_nasid;
+	unsigned long	kv_ro_baseaddr;
+	unsigned long	kv_rw_baseaddr;
+} kern_vars_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_SN_KLKERNVARS_H */
+
diff --git a/include/asm-mips/sn/launch.h b/include/asm-mips/sn/launch.h
new file mode 100644
index 000000000000..b67699c0c475
--- /dev/null
+++ b/include/asm-mips/sn/launch.h
@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2000 by Colin Ngam
+ */
+#ifndef _ASM_SN_LAUNCH_H
+#define _ASM_SN_LAUNCH_H
+
+#include <linux/config.h>
+#include <asm/sn/types.h>
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, then returns to the slave loop.  The master may poll or wait
+ * for the slaves to finish.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per local CPU.
+ */
+
+#define LAUNCH_MAGIC		0xaddbead2addbead3
+#ifdef CONFIG_SGI_IP27
+#define LAUNCH_SIZEOF		0x100
+#define LAUNCH_PADSZ		0xa0
+#endif
+
+#define LAUNCH_OFF_MAGIC	0x00	/* Struct offsets for assembly      */
+#define LAUNCH_OFF_BUSY		0x08
+#define LAUNCH_OFF_CALL		0x10
+#define LAUNCH_OFF_CALLC	0x18
+#define LAUNCH_OFF_CALLPARM	0x20
+#define LAUNCH_OFF_STACK	0x28
+#define LAUNCH_OFF_GP		0x30
+#define LAUNCH_OFF_BEVUTLB	0x38
+#define LAUNCH_OFF_BEVNORMAL	0x40
+#define LAUNCH_OFF_BEVECC	0x48
+
+#define LAUNCH_STATE_DONE	0	/* Return value of LAUNCH_POLL      */
+#define LAUNCH_STATE_SENT	1
+#define LAUNCH_STATE_RECD	2
+
+/*
+ * The launch routine is called only if the complement address is correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ * The slave_launch routine turns on the BUSY flag, and the slave loop
+ * clears the BUSY flag after control is returned to it.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef int launch_state_t;
+typedef void (*launch_proc_t)(u64 call_parm);
+
+typedef struct launch_s {
+	volatile u64		magic;	/* Magic number                     */
+	volatile u64		busy;	/* Slave currently active           */
+	volatile launch_proc_t	call_addr;	/* Func. for slave to call  */
+	volatile u64		call_addr_c;	/* 1's complement of call_addr*/
+	volatile u64		call_parm;	/* Single parm passed to call*/
+	volatile void *stack_addr;	/* Stack pointer for slave function */
+	volatile void *gp_addr;		/* Global pointer for slave func.   */
+	volatile char 		*bevutlb;/* Address of bev utlb ex handler   */
+	volatile char 		*bevnormal;/*Address of bev normal ex handler */
+	volatile char 		*bevecc;/* Address of bev cache err handler */
+	volatile char		pad[160];	/* Pad to LAUNCH_SIZEOF	    */
+} launch_t;
+
+/*
+ * PROM entry points for launch routines are determined by IPxxprom/start.s
+ */
+
+#define LAUNCH_SLAVE	(*(void (*)(int nasid, int cpu, \
+				    launch_proc_t call_addr, \
+				    u64 call_parm, \
+				    void *stack_addr, \
+				    void *gp_addr)) \
+			 IP27PROM_LAUNCHSLAVE)
+
+#define LAUNCH_WAIT	(*(void (*)(int nasid, int cpu, int timeout_msec)) \
+			 IP27PROM_WAITSLAVE)
+
+#define LAUNCH_POLL	(*(launch_state_t (*)(int nasid, int cpu)) \
+			 IP27PROM_POLLSLAVE)
+
+#define LAUNCH_LOOP	(*(void (*)(void)) \
+			 IP27PROM_SLAVELOOP)
+
+#define LAUNCH_FLASH	(*(void (*)(void)) \
+			 IP27PROM_FLASHLEDS)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_LAUNCH_H */
diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h
new file mode 100644
index 000000000000..3a17846df849
--- /dev/null
+++ b/include/asm-mips/sn/mapped_kernel.h
@@ -0,0 +1,59 @@
+/*
+ * File created by Kanoj Sarcar 06/06/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_MAPPED_KERNEL_H
+#define __ASM_SN_MAPPED_KERNEL_H
+
+/*
+ * Note on how mapped kernels work: the text and data section is
+ * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
+ * init/setup/data section gets a 16M virtual address bump in the
+ * ld.script file (so that tlblo0 and tlblo1 maps the sections).
+ * The vmlinux.64 section addresses are put in the xkseg range
+ * using the change-addresses makefile option. Use elfdump -of
+ * on IRIX to see where the sections go. The Origin loader loads
+ * the two sections contiguously in physical memory. The loader
+ * sets the entry point into kernel_entry using a xkphys address,
+ * but instead of using 0xa800000001160000, it uses the address
+ * 0xa800000000160000, which is where it physically loaded that
+ * code. So no jumps can be done before we have switched to using
+ * cksseg addresses.
+ */
+#include <linux/config.h>
+#include <asm/addrspace.h>
+
+#ifdef CONFIG_BUILD_ELF64
+#define REP_BASE	CAC_BASE
+#else
+#define REP_BASE	CKSEG0
+#endif
+
+#ifdef CONFIG_MAPPED_KERNEL
+
+#define MAPPED_ADDR_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_ADDR_RW_TO_PHYS(x)	(x - REP_BASE - 16777216)
+
+#define MAPPED_KERN_RO_PHYSBASE(n) \
+			(PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) \
+			(PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr)
+
+#define MAPPED_KERN_RO_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
+				MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid()))
+#define MAPPED_KERN_RW_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \
+				MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid()))
+
+#else /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_KERN_RW_TO_PHYS(x)	(x - REP_BASE)
+
+#endif /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
+#define MAPPED_KERN_RW_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
+
+#endif /* __ASM_SN_MAPPED_KERNEL_H  */
diff --git a/include/asm-mips/sn/nmi.h b/include/asm-mips/sn/nmi.h
new file mode 100644
index 000000000000..6b7b0b5f3729
--- /dev/null
+++ b/include/asm-mips/sn/nmi.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_NMI_H
+#define __ASM_SN_NMI_H
+
+#ident "$Revision: 1.5 $"
+
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, followed by an optional rendezvous function, then returns to
+ * the slave loop.  The master does not wait for the slaves before
+ * returning.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per CPU.
+ */
+
+#define NMI_MAGIC		0x48414d4d455201
+#define NMI_SIZEOF		0x40
+
+#define NMI_OFF_MAGIC		0x00	/* Struct offsets for assembly      */
+#define NMI_OFF_FLAGS		0x08
+#define NMI_OFF_CALL		0x10
+#define NMI_OFF_CALLC		0x18
+#define NMI_OFF_CALLPARM	0x20
+#define NMI_OFF_GMASTER		0x28
+
+/*
+ * The NMI routine is called only if the complement address is
+ * correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct nmi_s {
+	volatile unsigned long	 magic;		/* Magic number */
+	volatile unsigned long	 flags;		/* Combination of flags above */
+	volatile void *call_addr;	/* Routine for slave to call        */
+	volatile void *call_addr_c;	/* 1's complement of address        */
+	volatile void *call_parm;	/* Single parm passed to call	    */
+	volatile unsigned long	 gmaster;	/* Flag true only on global master*/
+} nmi_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Following definitions are needed both in the prom & the kernel
+ * to identify the format of the nmi cpu register save area in the
+ * low memory on each node.
+ */
+#ifndef __ASSEMBLY__
+
+struct reg_struct {
+	unsigned long	gpr[32];
+	unsigned long	sr;
+	unsigned long	cause;
+	unsigned long	epc;
+	unsigned long	badva;
+	unsigned long	error_epc;
+	unsigned long	cache_err;
+	unsigned long	nmi_sr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* These are the assembly language offsets into the reg_struct structure */
+
+#define R0_OFF		0x0
+#define R1_OFF		0x8
+#define R2_OFF		0x10
+#define R3_OFF		0x18
+#define R4_OFF		0x20
+#define R5_OFF		0x28
+#define R6_OFF		0x30
+#define R7_OFF		0x38
+#define R8_OFF		0x40
+#define R9_OFF		0x48
+#define R10_OFF		0x50
+#define R11_OFF		0x58
+#define R12_OFF		0x60
+#define R13_OFF		0x68
+#define R14_OFF		0x70
+#define R15_OFF		0x78
+#define R16_OFF		0x80
+#define R17_OFF		0x88
+#define R18_OFF		0x90
+#define R19_OFF		0x98
+#define R20_OFF		0xa0
+#define R21_OFF		0xa8
+#define R22_OFF		0xb0
+#define R23_OFF		0xb8
+#define R24_OFF		0xc0
+#define R25_OFF		0xc8
+#define R26_OFF		0xd0
+#define R27_OFF		0xd8
+#define R28_OFF		0xe0
+#define R29_OFF		0xe8
+#define R30_OFF		0xf0
+#define R31_OFF		0xf8
+#define SR_OFF		0x100
+#define CAUSE_OFF	0x108
+#define EPC_OFF		0x110
+#define BADVA_OFF	0x118
+#define ERROR_EPC_OFF	0x120
+#define CACHE_ERR_OFF	0x128
+#define NMISR_OFF	0x130
+
+#endif /* __ASM_SN_NMI_H */
diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h
new file mode 100644
index 000000000000..398815639fb8
--- /dev/null
+++ b/include/asm-mips/sn/sn0/addrs.h
@@ -0,0 +1,364 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+#include <linux/config.h>
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture.  It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ *	 files.  Please bracket any language-dependent definitions
+ *	 appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C.  They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory).  We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN0_N_MODE
+
+#define NODE_SIZE_BITS		31
+#define BWIN_SIZE_BITS		28
+
+#define NASID_BITS		9
+#define NASID_BITMASK		(0x1ffLL)
+#define NASID_SHFT		31
+#define NASID_META_BITS		5
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN0_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS		32
+#define BWIN_SIZE_BITS		29
+
+#define NASID_BITMASK		(0xffLL)
+#define NASID_BITS		8
+#define NASID_SHFT		32
+#define NASID_META_BITS		4
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN0_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE	(UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK		(UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
+					NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__) && !defined(_STANDALONE)
+
+#define NODE_SWIN_BASE(nasid, widget)					\
+	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
+	: RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ || _STANDALONE */
+#define NODE_SWIN_BASE(nasid, widget) \
+     (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ || _STANDALONE */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS		3
+#define BWIN_SIZE		(UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define	BWIN_SIZEMASK		(BWIN_SIZE - 1)
+#define	BWIN_WIDGET_MASK	0x7
+#define NODE_BWIN_BASE0(nasid)	(NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin)	(NODE_BWIN_BASE0(nasid) + 	\
+			(UINT64_CAST (bigwin) << BWIN_SIZE_BITS))
+
+#define	BWIN_WIDGETADDR(addr)	((addr) & BWIN_SIZEMASK)
+#define	BWIN_WINDOWNUM(addr)	(((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define	NODE_BWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_BWIN_BASE0(nasid)) && \
+		 ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+				BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ *	CALIAS -- Varies in size, points to the first n bytes of memory
+ *		  	on the reader's node.
+ */
+
+#define CALIAS_BASE		CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off)	((volatile bridgereg_t *) \
+	((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid)	(NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#ifdef SABLE
+#define SABLE_LOG_TRIGGER(_map)	\
+		*((volatile hubreg_t *)(IO_BASE + 0x17ffff0)) = (_map)
+#else
+#define SABLE_LOG_TRIGGER(_map)
+#endif /* SABLE */
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice)					\
+                    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + 	\
+				  (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE		PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE		0x200000
+
+#define DIAG_BASE		PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE		0x300000
+
+#define ROUTE_BASE		PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE		0x200000
+
+#define IP27PROM_FLASH_HDR	PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA	PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX	32
+#define IP27PROM_CORP		PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE	0x10000
+#define IP27PROM_CORP_STK	PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE	0x2000
+#define IP27PROM_DECOMP_BUF	PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE	0xfff00
+
+#define IP27PROM_BASE		PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED	(UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX	0x100000
+
+#define IP27PROM_PCFG		PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE	0xd0000
+#define IP27PROM_ERRDMP		PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE	0xf000
+
+#define IP27PROM_INIT_START	PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE	PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE	0x200
+#define IP27PROM_NETUART	PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE	0x100
+#define IP27PROM_UNUSED1	PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE	0x500
+#define IP27PROM_ELSC_BASE_A	PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B	PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A	PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B	PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT	16
+#define IP27PROM_STACK_SIZE	(1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END	PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE		PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE		0x40000
+
+#define ENETBUFS_BASE		PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE		0x20000
+
+#define IO6PROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE		0x400000
+#define	IO6PROM_BASE_MAPPED	(UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE		0x200000
+
+#define NODEBUGUNIX_ADDR	PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR		PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH	10	/* and 11 */
+#define IP27PROM_INT_NETUART	12	/* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT	10
+#define IP27PROM_ELSC_SIZE	(1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE		PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT	14	/* stack per cpu */
+#define IO6PROM_STACK_SIZE	(1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY		PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART	PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP	PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE	PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD	PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS	PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD		PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE	PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE	PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE	PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE	LOCAL_HUB_ADDR(MD_UREG0_0)	/* base of UART regs */
+#define KL_UART_CMD	LOCAL_HUB_ADDR(MD_UREG0_0)	/* UART command reg */
+#define KL_UART_DATA	LOCAL_HUB_ADDR(MD_UREG0_1)	/* UART data reg */
+#define KL_I2C_REG	MD_UREG0_0			/* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined (HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME	0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME	0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME	(CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR	(0x1000 - 32)	/* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR	(0x1000 - 40)
+#define CACHE_ERR_SP		(CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE	(ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif	/* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#ifdef _STANDALONE
+
+/*
+ * The PROM needs to pass the device base address and the
+ * device pci cfg space address to the device drivers during
+ * install. The COMPONENT->Key field is used for this purpose.
+ * Macros needed by SN0 device drivers to convert the
+ * COMPONENT->Key field to the respective base address.
+ * Key field looks as follows:
+ *
+ *  +----------------------------------------------------+
+ *  |devnasid | widget  |pciid |hubwidid|hstnasid | adap |
+ *  |   2     |   1     |  1   |   1    |    2    |   1  |
+ *  +----------------------------------------------------+
+ *  |         |         |      |        |         |      |
+ *  64        48        40     32       24        8      0
+ *
+ * These are used by standalone drivers till the io infrastructure
+ * is in place.
+ */
+
+#ifndef __ASSEMBLY__
+
+#define uchar unsigned char
+
+#define KEY_DEVNASID_SHFT  48
+#define KEY_WIDID_SHFT	   40
+#define KEY_PCIID_SHFT	   32
+#define KEY_HUBWID_SHFT	   24
+#define KEY_HSTNASID_SHFT  8
+
+#define MK_SN0_KEY(nasid, widid, pciid) \
+			((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\
+				((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\
+				((__psunsigned_t)pciid) << KEY_PCIID_SHFT)
+
+#define ADD_HUBWID_KEY(key,hubwid)\
+			(key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT))
+
+#define ADD_HSTNASID_KEY(key,hstnasid)\
+			(key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT))
+
+#define GET_DEVNASID_FROM_KEY(key)	((short)(key >> KEY_DEVNASID_SHFT))
+#define GET_WIDID_FROM_KEY(key)		((uchar)(key >> KEY_WIDID_SHFT))
+#define GET_PCIID_FROM_KEY(key)		((uchar)(key >> KEY_PCIID_SHFT))
+#define GET_HUBWID_FROM_KEY(key)	((uchar)(key >> KEY_HUBWID_SHFT))
+#define GET_HSTNASID_FROM_KEY(key)	((short)(key >> KEY_HSTNASID_SHFT))
+
+#define PCI_64_TARGID_SHFT		60
+
+#define GET_PCIBASE_FROM_KEY(key)  (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+					GET_WIDID_FROM_KEY(key))\
+					| BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key)))
+
+#define GET_PCICFGBASE_FROM_KEY(key) \
+			(NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+			      GET_WIDID_FROM_KEY(key))\
+			| BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key)))
+
+#define GET_WIDBASE_FROM_KEY(key) \
+                        (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+                              GET_WIDID_FROM_KEY(key)))
+
+#define PUT_INSTALL_STATUS(c,s)		c->Revision = s
+#define GET_INSTALL_STATUS(c)		c->Revision
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _STANDALONE */
+
+#if defined (HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER	IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR	LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR	TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+				/* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET	((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */
diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h
new file mode 100644
index 000000000000..0e00dd474afc
--- /dev/null
+++ b/include/asm-mips/sn/sn0/arch.h
@@ -0,0 +1,89 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_ARCH_H
+#define _ASM_SN_SN0_ARCH_H
+
+#include <linux/config.h>
+
+#ifndef SABLE
+
+#ifndef SN0XXL  /* 128 cpu SMP max */
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ */
+#define MAX_COMPACT_NODES       64
+
+/*
+ * MAXCPUS refers to the maximum number of CPUs in a single kernel.
+ * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
+ */
+#define MAXCPUS                 128
+
+#else /* SN0XXL system */
+
+#define MAX_COMPACT_NODES       128
+#define MAXCPUS                 256
+
+#endif /* SN0XXL */
+
+/*
+ * This is the maximum number of NASIDS that can be present in a system.
+ * (Highest NASID plus one.)
+ */
+#define MAX_NASIDS		256
+
+/*
+ * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
+ */
+#define	MAX_REGIONS		64
+#define MAX_NONPREMIUM_REGIONS  16
+#define MAX_PREMIUM_REGIONS     MAX_REGIONS
+
+/*
+ * MAX_PARITIONS refers to the maximum number of logically defined
+ * partitions the system can support.
+ */
+#define MAX_PARTITIONS		MAX_REGIONS
+
+
+#else
+
+#define MAX_COMPACT_NODES	4
+#define MAX_NASIDS		4
+#define MAXCPUS			8
+
+#endif
+
+#define NASID_MASK_BYTES	((MAX_NASIDS + 7) / 8)
+
+/*
+ * Slot constants for SN0
+ */
+#ifdef CONFIG_SGI_SN0_N_MODE
+#define MAX_MEM_SLOTS   16                      /* max slots per node */
+#else /* !CONFIG_SGI_SN0_N_MODE, assume M_MODE */
+#define MAX_MEM_SLOTS   32                      /* max slots per node */
+#endif /* defined(N_MODE) */
+
+#if SABLE_RTL
+#define SLOT_SHIFT      	(28)
+#define SLOT_MIN_MEM_SIZE	(16*1024*1024)
+#else
+#define SLOT_SHIFT      	(27)
+#define SLOT_MIN_MEM_SIZE	(32*1024*1024)
+#endif
+
+#define CPUS_PER_NODE		2	/* CPUs on a single hub */
+#define CPUS_PER_NODE_SHFT	1	/* Bits to shift in the node number */
+#define CPUS_PER_SUBNODE	2	/* CPUs on a single hub PI */
+
+#endif /* _ASM_SN_SN0_ARCH_H */
diff --git a/include/asm-mips/sn/sn0/hub.h b/include/asm-mips/sn/sn0/hub.h
new file mode 100644
index 000000000000..f5dbba6f4610
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hub.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUB_H
+#define _ASM_SN_SN0_HUB_H
+
+/* The secret password; used to release protection */
+#define HUB_PASSWORD		0x53474972756c6573ull
+
+#define CHIPID_HUB		0
+#define CHIPID_ROUTER		1
+
+#define HUB_REV_1_0		1
+#define HUB_REV_2_0		2
+#define HUB_REV_2_1		3
+#define HUB_REV_2_2		4
+#define HUB_REV_2_3             5
+#define HUB_REV_2_4             6
+
+#define MAX_HUB_PATH		80
+
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubpi.h>
+#include <asm/sn/sn0/hubmd.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/sn0/hubni.h>
+//#include <asm/sn/sn0/hubcore.h>
+
+#ifdef SABLE
+#define IP27_NO_HUBUART_INT	1
+#endif
+
+/* Translation of uncached attributes */
+#define	UATTR_HSPEC	0
+#define	UATTR_IO	1
+#define	UATTR_MSPEC	2
+#define	UATTR_UNCAC	3
+
+#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
new file mode 100644
index 000000000000..80cf6a52ed3b
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -0,0 +1,988 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SGI_SN_SN0_HUBIO_H
+#define	_ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET		IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT		IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL		IIO_WCR	     /* Widget control register */
+#define IIO_WIDGET_TOUT		IIO_WRTO     /* Widget request timeout */
+#define IIO_WIDGET_FLUSH	IIO_WTFR     /* Widget target flush */
+#define IIO_PROTECT		IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD	IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS	IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS	IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK	IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR		IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG		IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT	IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT	IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR		IIO_IECLR    /* IO error clear */
+#define IIO_BTE_CRB_CNT         IIO_IBCN     /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define	IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
+#define	IIO_LLP_CSR_LLP_STAT_SHFT	12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY	0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0		IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0		IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0		IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 	IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0		IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0		0	     /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1	IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT		0
+#define BTEOFF_SRC		(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST		(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL		(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY		(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT		(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference.  When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE	0x400000
+#define IIO_BASE_BTE0	0x410000
+#define IIO_BASE_BTE1	0x420000
+#define IIO_BASE_PERF	0x430000
+#define IIO_PERF_CNT	0x430008
+
+#define IO_PERF_SETS	32
+
+#define IIO_WID		0x400000	/* Widget identification */
+#define IIO_WSTAT	0x400008	/* Widget status */
+#define IIO_WCR		0x400020	/* Widget control */
+
+#define	IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define	IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define	IIO_WSTAT_TXRETRY_MASK	(0x7F)
+#define	IIO_WSTAT_TXRETRY_SHFT	(16)
+#define	IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+					  IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR	0x400100	/* Local Access Protection */
+#define IIO_ILAPO	0x400108	/* Protection override */
+#define IIO_IOWA	0x400110	/* outbound widget access */
+#define IIO_IIWA	0x400118	/* inbound widget access */
+#define IIO_IIDEM	0x400120	/* Inbound Device Error Mask */
+#define IIO_ILCSR	0x400128	/* LLP control and status */
+#define IIO_ILLR	0x400130	/* LLP Log */
+#define IIO_IIDSR	0x400138	/* Interrupt destination */
+
+#define IIO_IIBUSERR	0x1400208	/* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT	28
+#define IIO_IIDSR_SENT_MASK	0x10000000
+#define IIO_IIDSR_ENB_SHIFT	24
+#define IIO_IIDSR_ENB_MASK	0x01000000
+#define IIO_IIDSR_NODE_SHIFT	8
+#define IIO_IIDSR_NODE_MASK	0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT	0
+#define IIO_IIDSR_LVL_MASK	0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0	0x400140	/* gfx node/widget register 0 */
+#define IIO_IGFX_1	0x400148	/* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_N_NUM_BITS	9	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	4
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_VLD_BITS	1	/* size of valid field */
+#define IIO_IGFX_VLD_MASK	((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT	20
+#define IIO_IGFX_INIT(widget, node, cpu, valid)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
+	(((valid)  & IIO_IGFX_VLD_MASK)   << IIO_IGFX_VLD_SHIFT)	 )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0	0x400150
+#define	IIO_SCRATCH_REG1	0x400158
+#define IIO_SCRATCH_MASK	0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0	0x0000000800000000
+#define IIO_SCRATCH_BIT0_1	0x0000000400000000
+#define IIO_SCRATCH_BIT0_2	0x0000000200000000
+#define IIO_SCRATCH_BIT0_3	0x0000000100000000
+#define IIO_SCRATCH_BIT0_4	0x0000000000800000
+#define IIO_SCRATCH_BIT0_5	0x0000000000400000
+#define IIO_SCRATCH_BIT0_6	0x0000000000200000
+#define IIO_SCRATCH_BIT0_7	0x0000000000100000
+#define IIO_SCRATCH_BIT0_8	0x0000000000010000
+#define IIO_SCRATCH_BIT0_9	0x0000000000001000
+#define IIO_SCRATCH_BIT0_R	0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES	7		/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW	IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN		HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET	0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+	u64	wid_reg_value;
+	struct {
+		u64 	wid_rsvd: 	32,	/* unused */
+                   	wid_rev_num:	 4,	/* revision number */
+                   	wid_part_num:	16,	/* the widget type: hub=c101 */
+                   	wid_mfg_num:	11,	/* Manufacturer id (IBM) */
+                   	wid_rsvd1:	 1;	/* Reserved */
+        } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+	u64	wcr_reg_value;
+	struct {
+		u64 	wcr_rsvd: 	41,	/* unused */
+                   	wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_dir_con:	 1,	/* widget direct connect */
+                   	wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+                   	wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+                   	wcr_rsvd1:	 8,	/* Reserved */
+			wcr_tag_mode:    1,	/* Tag mode */
+                   	wcr_widget_id:	 4;	/* LLP crossbar credit */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define	iwcr_dir_con	wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+	u64      reg_value;
+	struct {
+		u64	rsvd1:		31,
+			crazy:		 1,	/* Crazy bit		*/
+			rsvd2:		 8,
+			llp_tx_cnt:	 8, 	/* LLP Xmit retry counter */
+			rsvd3:		 6,
+			tx_max_rtry:	 1,	/* LLP Retry Timeout Signal */
+			rsvd4:		 2,
+			xt_tail_to:	 1,	/* Xtalk Tail Timeout	*/
+			xt_crd_to:	 1,	/* Xtalk Credit Timeout	*/
+			pending:	 4;	/* Pending Requests	*/
+	} wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+	u64	icsr_reg_value;
+	struct {
+		u64 	icsr_rsvd: 	22,	/* unused */
+                   	icsr_max_burst:	10,	/* max burst */
+                        icsr_rsvd4:	 6,	/* reserved */
+                   	icsr_max_retry:	10,	/* max retry */
+                        icsr_rsvd3:	 2,	/* reserved */
+                        icsr_lnk_stat:	 2,	/* link status */
+                        icsr_bm8:	 1,	/* Bit mode 8 */
+                        icsr_llp_en:	 1,	/* LLP enable bit */
+                 	icsr_rsvd2:	 1,     /* reserver */
+                        icsr_wrm_reset:	 1,	/* Warm reset bit */
+    			icsr_rsvd1:	 2,	/* Data ready offset */
+                        icsr_null_to:	 6;	/* Null timeout   */
+
+        } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+	u64	iowa_reg_value;
+	struct {
+		u64 	iowa_rsvd: 	48,	/* unused */
+                       	iowa_wxoac:	 8,	/* xtalk widget access bits */
+                   	iowa_rsvd1:	 7,	/* xtalk widget access bits */
+                  	iowa_w0oac:	 1;	/* xtalk widget access bits */
+        } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+	u64	iiwa_reg_value;
+	struct {
+		u64 	iiwa_rsvd: 	48,	/* unused */
+			iiwa_wxiac:	 8,	/* hub wid access bits */
+			iiwa_rsvd1:	 7,	/* reserved */
+			iiwa_w0iac:	 1;	/* hub wid0 access */
+        } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union	hubii_illr_u {
+	u64	illr_reg_value;
+	struct {
+		u64 	illr_rsvd: 	32,	/* unused */
+			illr_cb_cnt:	16,	/* checkbit error count */
+                   	illr_sn_cnt:	16;	/* sequence number count */
+        } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 	perf_rsvd  : 48,
+		        perf_icct  :  8,
+		        perf_ippr1 :  4,
+  		        perf_ippr0 :  4;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64	perf_cnt;
+	struct {
+		u64	perf_rsvd1 : 32,
+  			        perf_rsvd2 : 12,
+  			        perf_cnt   : 20;
+	} perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING	0x2
+
+#define IIO_LLP_CB_MAX	0xffff
+#define IIO_LLP_SN_MAX	0xffff
+
+/* IO PRB Entries */
+#define	IIO_NUM_IPRBS	(9)
+#define IIO_IOPRB_0	0x400198	/* PRB entry 0 */
+#define IIO_IOPRB_8	0x4001a0	/* PRB entry 8 */
+#define IIO_IOPRB_9	0x4001a8	/* PRB entry 9 */
+#define IIO_IOPRB_A	0x4001b0	/* PRB entry a */
+#define IIO_IOPRB_B	0x4001b8	/* PRB entry b */
+#define IIO_IOPRB_C	0x4001c0	/* PRB entry c */
+#define IIO_IOPRB_D	0x4001c8	/* PRB entry d */
+#define IIO_IOPRB_E	0x4001d0	/* PRB entry e */
+#define IIO_IOPRB_F	0x4001d8	/* PRB entry f */
+
+
+#define IIO_IXCC	0x4001e0	/* Crosstalk credit count timeout */
+#define IIO_IXTCC	IIO_IXCC
+#define IIO_IMEM	0x4001e8	/* Miscellaneous Enable Mask */
+#define IIO_IXTT	0x4001f0	/* Crosstalk tail timeout */
+#define IIO_IECLR	0x4001f8	/* IO error clear */
+#define IIO_IBCN        0x400200        /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1 << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1 << 8)        /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA	0x400300	/* PRB Counter adjust */
+#define IIO_NUM_PRTES	8		/* Total number of PRB table entries */
+#define IIO_PRTE_0	0x400308	/* PIO Read address table entry 0 */
+#define IIO_PRTE(_x)	(IIO_PRTE_0 + (8 * (_x)))
+#define	IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR	0x400388	/* PIO table entry deallocation */
+#define IIO_ICDR	0x400390	/* CRB Entry Deallocation */
+#define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
+#define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
+#define IIO_IMMR	IIO_IIAP
+#define IIO_ICMR	0x4003a8	/* CRB Managment Register */
+#define IIO_ICCR	0x4003b0	/* CRB Control Register */
+#define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
+#define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT	36
+#define IIO_ICMR_PC_VLD_MASK	(0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT	20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT	16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT	4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT	0
+#define IIO_ICMR_P_CNT_MASK	(0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define	IIO_IPDR_PND	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define	IIO_ICDR_PND	(1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ * 	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS		15	/* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS     12	/* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 	4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET		8
+#define IIO_ICRB_0		0x400400
+/* XXX - This is now tuneable:
+	#define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	(IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x)  (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x)	(IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x)  (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+	u64	reg_value;
+	struct {
+		u64 	resvd: 	6,
+			stall_bte0: 1,	/* Stall BTE 0 */
+			stall_bte1: 1,	/* Stall BTE 1 */
+			error:	1,	/* CRB has an error	*/
+			ecode:	3,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+	u64	reg_value;
+
+	struct {
+		u64 	resvd: 	6,
+			unused:	1,	/* Unused but RW!!	*/
+			error:	1,	/* CRB has an error	*/
+			ecode:	4,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right?  Check the spec. */
+#define ICRBN_A_CERR_SHFT	54
+#define ICRBN_A_ERR_MASK	0x3ff
+
+#if 0	/* Disabled, this causes namespace polution and break allmodconfig */
+/*
+ * Easy access macros.
+ */
+#define	a_error		icrba_fields_s.error
+#define	a_ecode		icrba_fields_s.ecode
+#define	a_lnetuce	icrba_fields_s.lnetuce
+#define	a_mark		icrba_fields_s.mark
+#define	a_xerr		icrba_fields_s.xerr
+#define	a_sidn		icrba_fields_s.sidn
+#define	a_tnum		icrba_fields_s.tnum
+#define	a_addr		icrba_fields_s.addr
+#define	a_valid		icrba_fields_s.valid
+#define	a_iow		icrba_fields_s.iow
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define	IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
+#define	IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
+#define	IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line.
+					 */
+#define	IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
+#define	IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
+#define	IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
+#define	IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
+#define	IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	5,
+		btenum:	1,	/* BTE to which entry belongs to */
+		cohtrans: 1,	/* Coherent transaction	*/
+		xtsize:	2,	/* Xtalk operation size
+				 * 0: Double Word
+				 * 1: 32 Bytes.
+				 * 2: 128 Bytes,
+				 * 3: Reserved.
+				 */
+		srcnode: 9,	/* Source Node ID		*/
+		srcinit: 2,	/* Source Initiator:
+				 * See below for field values.
+				 */
+		useold:	1,	/* Use OLD command for processing */
+		imsgtype: 2,	/* Incoming message type
+				 * see below for field values
+				 */
+		imsg: 	8,	/* Incoming message 	*/
+		initator: 3,	/* Initiator of original request
+				 * See below for field values.
+				 */
+		reqtype: 5,	/* Identifies type of request
+				 * See below for field values.
+				 */
+		rsvd2:	7,
+		ackcnt:	11,	/* Invalidate ack count	*/
+		resp:	1,	/* data response  given to processor */
+		ack: 	1,	/* indicates data ack received 	*/
+		hold:	1,	/* entry is gathering inval acks */
+		wb_pend:1,	/* waiting for writeback to complete */
+		intvn: 	1,	/* Intervention */
+		stall_ib: 1,	/* Stall Ibuf (from crosstalk) */
+		stall_intr: 1;	/* Stall internal interrupts */
+	} icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+	u64	reg_value;
+	struct {
+		u64	rsvd1:	5,
+			btenum:	1,	/* BTE to which entry belongs to */
+			cohtrans: 1,	/* Coherent transaction	*/
+			xtsize:	2,	/* Xtalk operation size
+					 * 0: Double Word
+					 * 1: 32 Bytes.
+					 * 2: 128 Bytes,
+					 * 3: Reserved.
+					 */
+			srcnode: 9,	/* Source Node ID		*/
+			srcinit: 2,	/* Source Initiator:
+					 * See below for field values.
+					 */
+			useold:	1,	/* Use OLD command for processing */
+			imsgtype: 2,	/* Incoming message type
+					 * see below for field values
+					 */
+			imsg: 	8,	/* Incoming message 	*/
+			initator: 3,	/* Initiator of original request
+					 * See below for field values.
+					 */
+			rsvd2: 	1,
+			pcache: 1,	/* entry belongs to partial cache */
+			reqtype: 5,	/* Identifies type of request
+					 * See below for field values.
+					 */
+			stl_ib:	1,	/* stall Ibus coming from xtalk	*/
+			stl_intr: 1,	/* Stall internal interrupts */
+			stl_bte0: 1,	/* Stall BTE 0 	*/
+			stl_bte1: 1,	/* Stall BTE 1	*/
+			intrvn:	1,	/* Req was target of intervention */
+			ackcnt:	11,	/* Invalidate ack count	*/
+			resp:	1,	/* data response  given to processor */
+			ack: 	1,	/* indicates data ack received 	*/
+			hold:	1,	/* entry is gathering inval acks */
+			wb_pend:1,	/* waiting for writeback to complete */
+			sleep: 	1,	/* xtalk req sleeping till IO-sync */
+			pnd_reply: 1,	/* replies not issed due to IOQ full */
+			pnd_req: 1;	/* reqs not issued due to IOQ full */
+	} h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_btenum	icrbb_field_s.btenum
+#define	b_cohtrans	icrbb_field_s.cohtrans
+#define	b_xtsize	icrbb_field_s.xtsize
+#define	b_srcnode	icrbb_field_s.srcnode
+#define	b_srcinit	icrbb_field_s.srcinit
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_imsg		icrbb_field_s.imsg
+#define	b_initiator	icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define	IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
+#define	IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
+#define	IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
+#define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
+#define	IIO_ICRB_GB_REQ		2	/* Source is Guranteed BW request */
+#define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
+
+/*
+ * Values for field imsgtype
+ */
+#define	IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk	*/
+#define	IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE 	*/
+#define	IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
+#define	IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define	IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
+#define	IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
+#define	IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
+#define	IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ? 	*/
+#define	IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define	IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
+#define	IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
+#define	IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
+#define	IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
+#define	IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
+#define	IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
+#define	IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate 	*/
+#define	IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
+#define	IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
+#define	IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write 	*/
+#define	IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
+#define	IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
+#define	IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
+#define	IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
+#define	IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+	u64	reg_value;
+	struct {
+		u64	rsvd:	6,
+			sleep:	1,
+			pricnt: 4,	/* Priority count sent with Read req */
+			pripsc: 4,	/* Priority Pre scalar 	*/
+			bteop:	1,	/* BTE Operation 	*/
+			push_be: 34,	/* Push address Byte enable
+					 * Holds push addr, if CRB is for BTE
+					 * If CRB belongs to Partial cache,
+					 * this contains byte enables bits
+					 * ([47:46] = 0)
+					 */
+			suppl:	11,	/* Supplemental field	*/
+			barrop: 1,	/* Barrier Op bit set in xtalk req */
+			doresp: 1,	/* Xtalk req needs a response 	*/
+			gbr:	1;	/* GBR bit set in xtalk packet 	*/
+	} icrbc_field_s;
+} icrbc_t;
+
+#define	c_pricnt	icrbc_field_s.pricnt
+#define	c_pripsc	icrbc_field_s.pripsc
+#define	c_bteop		icrbc_field_s.bteop
+#define	c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_benable 	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define	c_suppl		icrbc_field_s.suppl
+#define	c_barrop	icrbc_field_s.barrop
+#define	c_doresp	icrbc_field_s.doresp
+#define	c_gbr	icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+	u64	reg_value;
+	struct {
+	    u64	rsvd:	38,
+		toutvld: 1,	/* Timeout in progress for this CRB */
+		ctxtvld: 1,	/* Context field below is valid	*/
+		rsvd2:	1,
+		context: 15, 	/* Bit vector:
+				 * Has a bit set for each CRB entry
+				 * which needs to be deallocated
+				 * before this CRB entry is processed.
+				 * Set only for barrier operations.
+				 */
+		timeout: 8;	/* Timeout Upper 8 bits	*/
+	} icrbd_field_s;
+} icrbd_t;
+
+#define	icrbd_toutvld	icrbd_field_s.toutvld
+#define	icrbd_ctxtvld	icrbd_field_s.ctxtvld
+#define	icrbd_context	icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+	u64	hi_ifdr_value;
+	struct {
+		u64	ifdr_rsvd:	49,
+	                ifdr_maxrp:	 7,
+	                ifdr_rsvd1:	 1,
+                      	ifdr_maxrq:	 7;
+	} hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0	0x410000	/* BTE length/status 0 */
+#define IIO_IBSA_0	0x410008	/* BTE source address 0 */
+#define IIO_IBDA_0	0x410010	/* BTE destination address 0 */
+#define IIO_IBCT_0	0x410018	/* BTE control/terminate 0 */
+#define IIO_IBNA_0	0x410020	/* BTE notification address 0 */
+#define IIO_IBNR_0	IIO_IBNA_0
+#define IIO_IBIA_0	0x410028	/* BTE interrupt address 0 */
+
+#define IIO_IBLS_1	0x420000	/* BTE length/status 1 */
+#define IIO_IBSA_1	0x420008	/* BTE source address 1 */
+#define IIO_IBDA_1	0x420010	/* BTE destination address 1 */
+#define IIO_IBCT_1	0x420018	/* BTE control/terminate 1 */
+#define IIO_IBNA_1	0x420020	/* BTE notification address 1 */
+#define IIO_IBNR_1	IIO_IBNA_1
+#define IIO_IBIA_1	0x420028	/* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR	0x430000	/* Performance Control */
+#define IIO_IPPR	0x430008	/* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1		(1 << 18)  /* clear bte error 1 ??? */
+#define IECLR_BTE0		(1 << 17)  /* clear bte error 0 ??? */
+#define IECLR_CRAZY		(1 << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1 << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1 << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1 << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1 << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1 << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1 << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1 << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1 << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1 << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+	u64	entry;
+	struct {
+	    u64	rsvd1     : 7,  /* Reserved field 		*/
+		valid     : 1,	/* Maps to a timeout entry	*/
+		rsvd2     : 1,
+		srcnode   : 9,	/* Node which did this PIO	*/
+		initiator : 2,	/* If T5A or T5B or IO 		*/
+		rsvd3     : 3,
+		addr      : 38,	/* Physical address of PIO	*/
+		rsvd4     : 3;
+	} iprte_fields;
+} iprte_a_t;
+
+#define	iprte_valid	iprte_fields.valid
+#define	iprte_timeout	iprte_fields.timeout
+#define	iprte_srcnode	iprte_fields.srcnode
+#define	iprte_init	iprte_fields.initiator
+#define	iprte_addr	iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IPRTE_ADDRSHFT	3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	15,
+		error:	1,	/* Widget rcvd wr resp pkt w/ error */
+		ovflow:	5,	/* Over flow count. perf measurement */
+		fire_and_forget: 1, /* Launch Write without response */
+		mode:	2,	/* Widget operation Mode	*/
+		rsvd2:	2,
+		bnakctr: 14,
+		rsvd3: 	2,
+		anakctr: 14,
+		xtalkctr: 8;
+	} iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval	reg_value
+
+#define	iprb_error	iprb_fields_s.error
+#define	iprb_ovflow	iprb_fields_s.ovflow
+#define	iprb_ff		iprb_fields_s.fire_and_forget
+#define	iprb_mode	iprb_fields_s.mode
+#define	iprb_bnakctr	iprb_fields_s.bnakctr
+#define	iprb_anakctr	iprb_fields_s.anakctr
+#define	iprb_xtalkctr	iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define	IPRB_MODE_NORMAL	(0)
+#define	IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
+#define	IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
+#define	IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+	u64   ip_reg;	    /* the entire register value	*/
+	struct {
+	     u64 error:	1,  /*    63, error occurred		*/
+		ln_uce:	1,  /*    62: uncorrectable memory 	*/
+		ln_ae:	1,  /*    61: protection violation 	*/
+		ln_werr:1,  /*    60: write access error 	*/
+		ln_aerr:1,  /*    59: sn0net: Address error	*/
+		ln_perr:1,  /*    58: sn0net: poison error	*/
+		timeout:1,  /*    57: CRB timed out		*/
+		l_bdpkt:1,  /*    56: truncated pkt on sn0net	*/
+		c_bdpkt:1,  /*    55: truncated pkt on xtalk	*/
+		c_err:	1,  /*    54: incoming xtalk req, err set*/
+		rsvd1: 12,  /* 53-42: reserved			*/
+		valid:	1,  /*    41: Valid status		*/
+		sidn:	4,  /* 40-37: SIDN field of xtalk rqst	*/
+		tnum:	5,  /* 36-32: TNUM of xtalk request	*/
+		bo:	1,  /*    31: barrier op set in xtalk rqst*/
+		resprqd:1,  /*    30: xtalk rqst requires response*/
+		gbr:	1,  /*    29: gbr bit set in xtalk rqst	*/
+		size:	2,  /* 28-27: size of xtalk request	*/
+		excl:	4,  /* 26-23: exclusive bit(s)		*/
+		stall:	3,  /* 22-20: stall (xtalk, bte 0/1)	*/
+		intvn:	1,  /*    19: rqst target of intervention*/
+		resp:	1,  /*    18: Data response given to t5	*/
+		ack:	1,  /*    17: Data ack received.	*/
+		hold:	1,  /*    16: crb gathering invalidate acks*/
+		wb:	1,  /*    15: writeback pending.	*/
+		ack_cnt:11, /* 14-04: counter of invalidate acks*/
+		tscaler:4;  /* 03-00: Timeout prescaler		*/
+	} ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT	54
+#define ICRBP_A_ERR_MASK	0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+	u64 iin_reg;
+	struct {
+		u64 rsvd1 : 35,
+	            isent : 1,
+	            rsvd2 : 3,
+	            ienable: 1,
+	            rsvd  : 7,
+	            node  : 9,
+	            rsvd4 : 1,
+	            level : 7;
+	} iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1 << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1 << 8)
+#define IBCT_NOTIFY		(0x1 << 4)
+#define IBCT_ZFIL_MODE		(0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT		16
+#define IBIA_LEVEL_MASK		(0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT	0
+#define IBIA_NODE_ID_MASK	(0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET		9
+#define HUB_WIDGET_ID_MIN	0x8
+#define HUB_WIDGET_ID_MAX	0xf
+
+#define HUB_WIDGET_PART_NUM	0xc101
+#define MAX_HUBS_PER_XBOW	2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid)	(REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK	(UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define	      HUBII_XBOW_REV2_CREDIT  4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/include/asm-mips/sn/sn0/hubmd.h b/include/asm-mips/sn/sn0/hubmd.h
new file mode 100644
index 000000000000..a66def4e0ba0
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hubmd.h
@@ -0,0 +1,790 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBMD_H
+#define	_ASM_SN_SN0_HUBMD_H
+
+#include <linux/config.h>
+
+/*
+ * Hub Memory/Directory interface registers
+ */
+#define CACHE_SLINE_SIZE        128	/* Secondary cache line size on SN0 */
+
+#define	MAX_REGIONS		64
+
+/* Hardware page size and shift */
+
+#define MD_PAGE_SIZE		4096	 /* Page size in bytes		    */
+#define MD_PAGE_NUM_SHFT	12	 /* Address to page number shift    */
+
+/* Register offsets from LOCAL_HUB or REMOTE_HUB */
+
+#define MD_BASE			0x200000
+#define MD_BASE_PERF		0x210000
+#define MD_BASE_JUNK		0x220000
+
+#define MD_IO_PROTECT		0x200000 /* MD and core register protection */
+#define MD_IO_PROT_OVRRD	0x200008 /* Clear my bit in MD_IO_PROTECT   */
+#define MD_HSPEC_PROTECT	0x200010 /* BDDIR, LBOOT, RBOOT protection  */
+#define MD_MEMORY_CONFIG	0x200018 /* Memory/Directory DIMM control   */
+#define	MD_REFRESH_CONTROL	0x200020 /* Memory/Directory refresh ctrl   */
+#define	MD_FANDOP_CAC_STAT	0x200028 /* Fetch-and-op cache status 	    */
+#define	MD_MIG_DIFF_THRESH	0x200030 /* Page migr. count diff thresh.   */
+#define	MD_MIG_VALUE_THRESH	0x200038 /* Page migr. count abs. thresh.   */
+#define	MD_MIG_CANDIDATE	0x200040 /* Latest page migration candidate */
+#define	MD_MIG_CANDIDATE_CLR	0x200048 /* Clear page migration candidate  */
+#define MD_DIR_ERROR		0x200050 /* Directory DIMM error 	    */
+#define MD_DIR_ERROR_CLR	0x200058 /* Directory DIMM error clear 	    */
+#define MD_PROTOCOL_ERROR	0x200060 /* Directory protocol error 	    */
+#define MD_PROTOCOL_ERROR_CLR	0x200068 /* Directory protocol error clear  */
+#define MD_MEM_ERROR		0x200070 /* Memory DIMM error 		    */
+#define MD_MEM_ERROR_CLR	0x200078 /* Memory DIMM error clear 	    */
+#define MD_MISC_ERROR		0x200080 /* Miscellaneous MD error 	    */
+#define MD_MISC_ERROR_CLR	0x200088 /* Miscellaneous MD error clear    */
+#define MD_MEM_DIMM_INIT	0x200090 /* Memory DIMM mode initization.   */
+#define MD_DIR_DIMM_INIT	0x200098 /* Directory DIMM mode init. 	    */
+#define MD_MOQ_SIZE		0x2000a0 /* MD outgoing queue size 	    */
+#define MD_MLAN_CTL		0x2000a8 /* NIC (Microlan) control register */
+
+#define MD_PERF_SEL		0x210000 /* Select perf monitor events 	    */
+#define MD_PERF_CNT0		0x210010 /* Performance counter 0 	    */
+#define MD_PERF_CNT1		0x210018 /* Performance counter 1 	    */
+#define MD_PERF_CNT2		0x210020 /* Performance counter 2 	    */
+#define MD_PERF_CNT3		0x210028 /* Performance counter 3 	    */
+#define MD_PERF_CNT4		0x210030 /* Performance counter 4 	    */
+#define MD_PERF_CNT5		0x210038 /* Performance counter 5 	    */
+
+#define MD_UREG0_0		0x220000 /* uController/UART 0 register     */
+#define MD_UREG0_1		0x220008 /* uController/UART 0 register     */
+#define MD_UREG0_2		0x220010 /* uController/UART 0 register     */
+#define MD_UREG0_3		0x220018 /* uController/UART 0 register     */
+#define MD_UREG0_4		0x220020 /* uController/UART 0 register     */
+#define MD_UREG0_5		0x220028 /* uController/UART 0 register     */
+#define MD_UREG0_6		0x220030 /* uController/UART 0 register     */
+#define MD_UREG0_7		0x220038 /* uController/UART 0 register     */
+
+#define MD_SLOTID_USTAT		0x220048 /* Hub slot ID & UART/uCtlr status */
+#define MD_LED0			0x220050 /* Eight-bit LED for CPU A 	    */
+#define MD_LED1			0x220058 /* Eight-bit LED for CPU B 	    */
+
+#define MD_UREG1_0		0x220080 /* uController/UART 1 register     */
+#define MD_UREG1_1		0x220088 /* uController/UART 1 register     */
+#define MD_UREG1_2		0x220090 /* uController/UART 1 register     */
+#define MD_UREG1_3		0x220098 /* uController/UART 1 register     */
+#define MD_UREG1_4		0x2200a0 /* uController/UART 1 register     */
+#define MD_UREG1_5		0x2200a8 /* uController/UART 1 register     */
+#define MD_UREG1_6		0x2200b0 /* uController/UART 1 register     */
+#define MD_UREG1_7		0x2200b8 /* uController/UART 1 register     */
+#define MD_UREG1_8		0x2200c0 /* uController/UART 1 register     */
+#define MD_UREG1_9		0x2200c8 /* uController/UART 1 register     */
+#define MD_UREG1_10		0x2200d0 /* uController/UART 1 register     */
+#define MD_UREG1_11		0x2200d8 /* uController/UART 1 register     */
+#define MD_UREG1_12		0x2200e0 /* uController/UART 1 register     */
+#define MD_UREG1_13		0x2200e8 /* uController/UART 1 register     */
+#define MD_UREG1_14		0x2200f0 /* uController/UART 1 register     */
+#define MD_UREG1_15		0x2200f8 /* uController/UART 1 register     */
+
+#ifdef CONFIG_SGI_SN0_N_MODE
+#define MD_MEM_BANKS		4	 /* 4 banks of memory max in N mode */
+#else
+#define MD_MEM_BANKS		8	 /* 8 banks of memory max in M mode */
+#endif
+
+/*
+ * MD_MEMORY_CONFIG fields
+ *
+ *   MD_SIZE_xxx are useful for representing the size of a SIMM or bank
+ *   (SIMM pair).  They correspond to the values needed for the bit
+ *   triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size.
+ *   Bits not used by the MD are used by software.
+ */
+
+#define MD_SIZE_EMPTY		0	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_8MB		1
+#define MD_SIZE_16MB		2
+#define MD_SIZE_32MB		3	/* Broken in Hub 1		    */
+#define MD_SIZE_64MB		4	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_128MB		5	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_256MB		6
+#define MD_SIZE_512MB		7	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_1GB		8
+#define MD_SIZE_2GB		9
+#define MD_SIZE_4GB		10
+
+#define MD_SIZE_BYTES(size)	((size) == 0 ? 0 : 0x400000L << (size))
+#define MD_SIZE_MBYTES(size)	((size) == 0 ? 0 :   4	     << (size))
+
+#define MMC_FPROM_CYC_SHFT	49	/* Have to use UINT64_CAST, instead */
+#define MMC_FPROM_CYC_MASK	(UINT64_CAST 31 << 49)	/* of 'L' suffix,   */
+#define MMC_FPROM_WR_SHFT	44			/* for assembler    */
+#define MMC_FPROM_WR_MASK	(UINT64_CAST 31 << 44)
+#define MMC_UCTLR_CYC_SHFT	39
+#define MMC_UCTLR_CYC_MASK	(UINT64_CAST 31 << 39)
+#define MMC_UCTLR_WR_SHFT	34
+#define MMC_UCTLR_WR_MASK	(UINT64_CAST 31 << 34)
+#define MMC_DIMM0_SEL_SHFT	32
+#define MMC_DIMM0_SEL_MASK	(UINT64_CAST 3 << 32)
+#define MMC_IO_PROT_EN_SHFT	31
+#define MMC_IO_PROT_EN_MASK	(UINT64_CAST 1 << 31)
+#define MMC_IO_PROT		(UINT64_CAST 1 << 31)
+#define MMC_ARB_MLSS_SHFT	30
+#define MMC_ARB_MLSS_MASK	(UINT64_CAST 1 << 30)
+#define MMC_ARB_MLSS		(UINT64_CAST 1 << 30)
+#define MMC_IGNORE_ECC_SHFT	29
+#define MMC_IGNORE_ECC_MASK	(UINT64_CAST 1 << 29)
+#define MMC_IGNORE_ECC		(UINT64_CAST 1 << 29)
+#define MMC_DIR_PREMIUM_SHFT	28
+#define MMC_DIR_PREMIUM_MASK	(UINT64_CAST 1 << 28)
+#define MMC_DIR_PREMIUM		(UINT64_CAST 1 << 28)
+#define MMC_REPLY_GUAR_SHFT	24
+#define MMC_REPLY_GUAR_MASK	(UINT64_CAST 15 << 24)
+#define MMC_BANK_SHFT(_b)	((_b) * 3)
+#define MMC_BANK_MASK(_b)	(UINT64_CAST 7 << MMC_BANK_SHFT(_b))
+#define MMC_BANK_ALL_MASK	0xffffff
+#define MMC_RESET_DEFAULTS	(UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \
+				 UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \
+				 UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \
+				 UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \
+				 MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \
+				 UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \
+				 MMC_BANK_ALL_MASK)
+
+/* MD_REFRESH_CONTROL fields */
+
+#define MRC_ENABLE_SHFT		63
+#define MRC_ENABLE_MASK		(UINT64_CAST 1 << 63)
+#define MRC_ENABLE		(UINT64_CAST 1 << 63)
+#define MRC_COUNTER_SHFT	12
+#define MRC_COUNTER_MASK	(UINT64_CAST 0xfff << 12)
+#define MRC_CNT_THRESH_MASK	0xfff
+#define MRC_RESET_DEFAULTS	(UINT64_CAST 0x400)
+
+/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */
+
+#define MDI_SELECT_SHFT		32
+#define MDI_SELECT_MASK		(UINT64_CAST 0x0f << 32)
+#define MDI_DIMM_MODE_MASK	(UINT64_CAST 0xfff)
+
+/* MD_MOQ_SIZE fields */
+
+#define MMS_RP_SIZE_SHFT	8
+#define MMS_RP_SIZE_MASK	(UINT64_CAST 0x3f << 8)
+#define MMS_RQ_SIZE_SHFT	0
+#define MMS_RQ_SIZE_MASK	(UINT64_CAST 0x1f)
+#define MMS_RESET_DEFAULTS	(0x32 << 8 | 0x12)
+
+/* MD_FANDOP_CAC_STAT fields */
+
+#define MFC_VALID_SHFT		63
+#define MFC_VALID_MASK		(UINT64_CAST 1 << 63)
+#define MFC_VALID		(UINT64_CAST 1 << 63)
+#define MFC_ADDR_SHFT		6
+#define MFC_ADDR_MASK		(UINT64_CAST 0x3ffffff)
+
+/* MD_MLAN_CTL fields */
+
+#define MLAN_PHI1_SHFT		27
+#define MLAN_PHI1_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PHI0_SHFT		20
+#define MLAN_PHI0_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PULSE_SHFT		10
+#define MLAN_PULSE_MASK		(UINT64_CAST 0x3ff << 10)
+#define MLAN_SAMPLE_SHFT	2
+#define MLAN_SAMPLE_MASK	(UINT64_CAST 0xff << 2)
+#define MLAN_DONE_SHFT		1
+#define MLAN_DONE_MASK		2
+#define MLAN_DONE		(UINT64_CAST 0x02)
+#define MLAN_RD_DATA		(UINT64_CAST 0x01)
+#define MLAN_RESET_DEFAULTS	(UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \
+				 UINT64_CAST 0x31 << MLAN_PHI0_SHFT)
+
+/* MD_SLOTID_USTAT bit definitions */
+
+#define MSU_CORECLK_TST_SHFT	7	/* You don't wanna know             */
+#define MSU_CORECLK_TST_MASK	(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_TST		(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_SHFT	6	/* You don't wanna know             */
+#define MSU_CORECLK_MASK	(UINT64_CAST 1 << 6)
+#define MSU_CORECLK		(UINT64_CAST 1 << 6)
+#define MSU_NETSYNC_SHFT	5	/* You don't wanna know             */
+#define MSU_NETSYNC_MASK	(UINT64_CAST 1 << 5)
+#define MSU_NETSYNC		(UINT64_CAST 1 << 5)
+#define MSU_FPROMRDY_SHFT	4	/* Flash PROM ready bit 	    */
+#define MSU_FPROMRDY_MASK	(UINT64_CAST 1 << 4)
+#define MSU_FPROMRDY		(UINT64_CAST 1 << 4)
+#define MSU_I2CINTR_SHFT		3	/* I2C interrupt bit   */
+#define MSU_I2CINTR_MASK		(UINT64_CAST 1 << 3)
+#define MSU_I2CINTR		(UINT64_CAST 1 << 3)
+#define MSU_SLOTID_MASK		0xff
+#define MSU_SN0_SLOTID_SHFT	0	/* Slot ID			    */
+#define MSU_SN0_SLOTID_MASK	(UINT64_CAST 7)
+#define MSU_SN00_SLOTID_SHFT	7
+#define MSU_SN00_SLOTID_MASK	(UINT64_CAST 0x80)
+
+#define	MSU_PIMM_PSC_SHFT	4
+#define	MSU_PIMM_PSC_MASK	(0xf << MSU_PIMM_PSC_SHFT)
+
+/* MD_MIG_DIFF_THRESH bit definitions */
+
+#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_DIFF_THRES_VALID_SHFT 63
+#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_VALUE_THRESH bit definitions */
+
+#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_VALUE_THRES_VALID_SHFT 63
+#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_CANDIDATE bit definitions */
+
+#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_CANDIDATE_VALID_SHFT 63
+#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30)
+#define MD_MIG_CANDIDATE_TYPE_SHFT 30
+#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29)
+#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29
+#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18)
+#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18
+#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20)
+#define MD_MIG_CANDIDATE_NODEID_SHFT 20
+#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff)
+#define MD_MIG_CANDIDATE_ADDR_SHFT 14  /* The address starts at bit 14 */
+
+/* Other MD definitions */
+
+#define MD_BANK_SHFT		29			/* log2(512 MB)     */
+#define MD_BANK_MASK		(UINT64_CAST 7 << 29)
+#define MD_BANK_SIZE		(UINT64_CAST 1 << MD_BANK_SHFT)	  /* 512 MB */
+#define MD_BANK_OFFSET(_b)	(UINT64_CAST (_b) << MD_BANK_SHFT)
+
+/*
+ * The following definitions cover the bit field definitions for the
+ * various MD registers.  For multi-bit registers, we define both
+ * a shift amount and a mask value.  By convention, if you want to
+ * isolate a field, you should mask the field and then shift it down,
+ * since this makes the masks useful without a shift.
+ */
+
+/* Directory entry states for both premium and standard SIMMs. */
+
+#define MD_DIR_SHARED		(UINT64_CAST 0x0)	/* 000 */
+#define MD_DIR_POISONED		(UINT64_CAST 0x1)	/* 001 */
+#define MD_DIR_EXCLUSIVE	(UINT64_CAST 0x2)	/* 010 */
+#define MD_DIR_BUSY_SHARED	(UINT64_CAST 0x3)	/* 011 */
+#define MD_DIR_BUSY_EXCL	(UINT64_CAST 0x4)	/* 100 */
+#define MD_DIR_WAIT		(UINT64_CAST 0x5)	/* 101 */
+#define MD_DIR_UNOWNED		(UINT64_CAST 0x7)	/* 111 */
+
+/*
+ * The MD_DIR_FORCE_ECC bit can be added directory entry write data
+ * to forcing the ECC to be written as-is instead of recalculated.
+ */
+
+#define MD_DIR_FORCE_ECC	(UINT64_CAST 1 << 63)
+
+/*
+ * Premium SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A, B, and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE = shared, FINE = 1
+ * Format B:  STATE = shared, FINE = 0
+ * Format C:  STATE != shared (FINE must be 0)
+ */
+
+#define MD_PDIR_MASK		0xffffffffffff		/* Whole entry 	    */
+#define MD_PDIR_ECC_SHFT	0			/* ABC low or high  */
+#define MD_PDIR_ECC_MASK	0x7f
+#define MD_PDIR_PRIO_SHFT	8			/* ABC low 	    */
+#define MD_PDIR_PRIO_MASK	(0xf << 8)
+#define MD_PDIR_AX_SHFT		7			/* ABC low 	    */
+#define MD_PDIR_AX_MASK		(1 << 7)
+#define MD_PDIR_AX		(1 << 7)
+#define MD_PDIR_FINE_SHFT	12			/* ABC low 	    */
+#define MD_PDIR_FINE_MASK	(1 << 12)
+#define MD_PDIR_FINE		(1 << 12)
+#define MD_PDIR_OCT_SHFT	13			/* A low 	    */
+#define MD_PDIR_OCT_MASK	(7 << 13)
+#define MD_PDIR_STATE_SHFT	13			/* BC low 	    */
+#define MD_PDIR_STATE_MASK	(7 << 13)
+#define MD_PDIR_ONECNT_SHFT	16			/* BC low 	    */
+#define MD_PDIR_ONECNT_MASK	(0x3f << 16)
+#define MD_PDIR_PTR_SHFT	22			/* C low 	    */
+#define MD_PDIR_PTR_MASK	(UINT64_CAST 0x7ff << 22)
+#define MD_PDIR_VECMSB_SHFT	22			/* AB low 	    */
+#define MD_PDIR_VECMSB_BITMASK	0x3ffffff
+#define MD_PDIR_VECMSB_BITSHFT	27
+#define MD_PDIR_VECMSB_MASK	(UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
+#define MD_PDIR_CWOFF_SHFT	7			/* C high 	    */
+#define MD_PDIR_CWOFF_MASK	(7 << 7)
+#define MD_PDIR_VECLSB_SHFT	10			/* AB high 	    */
+#define MD_PDIR_VECLSB_BITMASK	(UINT64_CAST 0x3fffffffff)
+#define MD_PDIR_VECLSB_BITSHFT	0
+#define MD_PDIR_VECLSB_MASK	(MD_PDIR_VECLSB_BITMASK << 10)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_PDIR_INIT_LO		(MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \
+				 MD_PDIR_AX)
+#define MD_PDIR_INIT_HI		0
+#define MD_PDIR_INIT_PROT	(MD_PROT_RW << MD_PPROT_IO_SHFT | \
+				 MD_PROT_RW << MD_PPROT_SHFT)
+
+/*
+ * Standard SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE == shared
+ * Format C:  STATE != shared
+ */
+
+#define MD_SDIR_MASK		0xffff			/* Whole entry 	    */
+#define MD_SDIR_ECC_SHFT	0			/* AC low or high   */
+#define MD_SDIR_ECC_MASK	0x1f
+#define MD_SDIR_PRIO_SHFT	6			/* AC low 	    */
+#define MD_SDIR_PRIO_MASK	(1 << 6)
+#define MD_SDIR_AX_SHFT		5			/* AC low 	    */
+#define MD_SDIR_AX_MASK		(1 << 5)
+#define MD_SDIR_AX		(1 << 5)
+#define MD_SDIR_STATE_SHFT	7			/* AC low 	    */
+#define MD_SDIR_STATE_MASK	(7 << 7)
+#define MD_SDIR_PTR_SHFT	10			/* C low 	    */
+#define MD_SDIR_PTR_MASK	(0x3f << 10)
+#define MD_SDIR_CWOFF_SHFT	5			/* C high 	    */
+#define MD_SDIR_CWOFF_MASK	(7 << 5)
+#define MD_SDIR_VECMSB_SHFT	11			/* A low 	    */
+#define MD_SDIR_VECMSB_BITMASK	0x1f
+#define MD_SDIR_VECMSB_BITSHFT	7
+#define MD_SDIR_VECMSB_MASK	(MD_SDIR_VECMSB_BITMASK << 11)
+#define MD_SDIR_VECLSB_SHFT	5			/* A high 	    */
+#define MD_SDIR_VECLSB_BITMASK	0x7ff
+#define MD_SDIR_VECLSB_BITSHFT	0
+#define MD_SDIR_VECLSB_MASK	(MD_SDIR_VECLSB_BITMASK << 5)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_SDIR_INIT_LO		(MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \
+				 MD_SDIR_AX)
+#define MD_SDIR_INIT_HI		0
+#define MD_SDIR_INIT_PROT	(MD_PROT_RW << MD_SPROT_SHFT)
+
+/* Protection and migration field values */
+
+#define MD_PROT_RW		(UINT64_CAST 0x6)
+#define MD_PROT_RO		(UINT64_CAST 0x3)
+#define MD_PROT_NO		(UINT64_CAST 0x0)
+#define MD_PROT_BAD		(UINT64_CAST 0x5)
+
+/* Premium SIMM protection entry shifts and masks. */
+
+#define MD_PPROT_SHFT		0			/* Prot. field 	    */
+#define MD_PPROT_MASK		7
+#define MD_PPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_PPROT_MIGMD_MASK	(3 << 3)
+#define MD_PPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_PPROT_REFCNT_WIDTH	0x7ffff
+#define MD_PPROT_REFCNT_MASK	(MD_PPROT_REFCNT_WIDTH << 5)
+
+#define MD_PPROT_IO_SHFT	45			/* I/O Prot field   */
+#define MD_PPROT_IO_MASK	(UINT64_CAST 7 << 45)
+
+/* Standard SIMM protection entry shifts and masks. */
+
+#define MD_SPROT_SHFT		0			/* Prot. field 	    */
+#define MD_SPROT_MASK		7
+#define MD_SPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_SPROT_MIGMD_MASK	(3 << 3)
+#define MD_SPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_SPROT_REFCNT_WIDTH	0x7ff
+#define MD_SPROT_REFCNT_MASK	(MD_SPROT_REFCNT_WIDTH << 5)
+
+/* Migration modes used in protection entries */
+
+#define MD_PROT_MIGMD_IREL	(UINT64_CAST 0x3 << 3)
+#define MD_PROT_MIGMD_IABS	(UINT64_CAST 0x2 << 3)
+#define MD_PROT_MIGMD_PREL	(UINT64_CAST 0x1 << 3)
+#define MD_PROT_MIGMD_OFF	(UINT64_CAST 0x0 << 3)
+
+
+/*
+ * Operations on page migration threshold register
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * LED register macros
+ */
+
+#define CPU_LED_ADDR(_nasid, _slice)					   \
+	(private.p_sn00 ?						   \
+	 REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 +	((_slice) << 5)) :	   \
+	 REMOTE_HUB_ADDR((_nasid), MD_LED0    + ((_slice) << 3)))
+
+#define SET_CPU_LEDS(_nasid, _slice,  _val)				   \
+	(HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
+
+#define SET_MY_LEDS(_v) 						   \
+	SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
+
+/*
+ * Operations on Memory/Directory DIMM control register
+ */
+
+#define DIRTYPE_PREMIUM 1
+#define DIRTYPE_STANDARD 0
+#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\
+	(REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \
+	MMC_DIR_PREMIUM_SHFT)
+
+
+/*
+ * Operations on page migration count difference and absolute threshold
+ * registers
+ */
+
+#define MD_MIG_DIFF_THRESH_GET(region) ( \
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+	MD_MIG_DIFF_THRES_VALUE_MASK)
+
+#define MD_MIG_DIFF_THRESH_SET(region, value) (				\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		MD_MIG_DIFF_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_DIFF_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     & ~MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     | MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) &			\
+	       MD_MIG_DIFF_THRES_VALID_MASK)
+
+#define MD_MIG_VALUE_THRESH_GET(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &  \
+	MD_MIG_VALUE_THRES_VALUE_MASK)
+
+#define MD_MIG_VALUE_THRESH_SET(region, value) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		MD_MIG_VALUE_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_VALUE_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH)		\
+			     & ~MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH)		\
+			     | MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) (			\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &			 \
+	       MD_MIG_VALUE_THRES_VALID_MASK)
+
+/*
+ * Operations on page migration candidate register
+ */
+
+#define MD_MIG_CANDIDATE_GET(my_region_id) ( \
+	REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR))
+
+#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK)
+
+#define MD_MIG_CANDIDATE_NODEID(value) ( \
+	((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT)
+
+#define MD_MIG_CANDIDATE_TYPE(value) ( \
+	((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT)
+
+#define MD_MIG_CANDIDATE_VALID(value) ( \
+	((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT)
+
+/*
+ * Macros to retrieve fields in the protection entry
+ */
+
+/* for Premium SIMM */
+#define MD_PPROT_REFCNT_GET(value) ( \
+	((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT)
+
+#define MD_PPROT_MIGMD_GET(value) ( \
+	((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT)
+
+/* for Standard SIMM */
+#define MD_SPROT_REFCNT_GET(value) ( \
+	((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT)
+
+#define MD_SPROT_MIGMD_GET(value) ( \
+	((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT)
+
+/*
+ * Format of dir_error, mem_error, protocol_error and misc_error registers
+ */
+
+struct dir_error_reg {
+	u64	uce_vld:   1,	/*    63: valid directory uce 	*/
+		ae_vld:	   1,	/*    62: valid dir prot ecc error */
+		ce_vld:	   1,	/*    61: valid correctable ECC err*/
+		rsvd1:	  19,	/* 60-42: reserved		*/
+		bad_prot:  3,	/* 41-39: encoding, bad access rights*/
+		bad_syn:   7,	/* 38-32: bad dir syndrome	*/
+		rsvd2:	   2,	/* 31-30: reserved		*/
+		hspec_addr:27,	/* 29-03: bddir space bad entry */
+		uce_ovr:   1,	/*     2: multiple dir uce's	*/
+		ae_ovr:	   1,	/*     1: multiple prot ecc errs*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+typedef union md_dir_error {
+	u64	derr_reg;	/* the entire register 		*/
+	struct dir_error_reg derr_fmt;	/* the register format		*/
+} md_dir_error_t;
+
+
+struct mem_error_reg {
+	u64	uce_vld:   1,	/*    63: valid memory uce 	*/
+		ce_vld:	   1,	/*    62: valid correctable ECC err*/
+		rsvd1:	  22,	/* 61-40: reserved		*/
+		bad_syn:   8,	/* 39-32: bad mem ecc syndrome	*/
+		address:  29,	/* 31-03: bad entry pointer	*/
+		rsvd2:	   1,	/*     2: reserved		*/
+		uce_ovr:   1,	/*     1: multiple mem uce's	*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+
+typedef union md_mem_error {
+	u64	merr_reg;	/* the entire register 		*/
+	struct mem_error_reg  merr_fmt; /* format of the mem_error reg  */
+} md_mem_error_t;
+
+
+struct proto_error_reg {
+	u64	valid:	   1,	/*    63: valid protocol error	*/
+		rsvd1:	   2,	/* 62-61: reserved		*/
+		initiator:11,	/* 60-50: id of request initiator*/
+		backoff:   2,	/* 49-48: backoff control	*/
+		msg_type:  8,	/* 47-40: type of request	*/
+		access:	   2,	/* 39-38: access rights of initiator*/
+		priority:  1,	/*    37: priority level of requestor*/
+		dir_state: 4,	/* 36-33: state of directory	*/
+		pointer_me:1,	/*    32: initiator same as dir ptr */
+		address:  29,	/* 31-03: request address	*/
+		rsvd2:	   2,	/* 02-01: reserved		*/
+		overrun:   1;	/*     0: multiple protocol errs */
+};
+
+typedef union md_proto_error {
+	u64	perr_reg;	/* the entire register 		*/
+	struct proto_error_reg	perr_fmt; /* format of the register	*/
+} md_proto_error_t;
+
+
+struct md_sdir_high_fmt {
+	unsigned short sd_hi_bvec : 11,
+		       sd_hi_ecc  : 5;
+};
+
+
+typedef union md_sdir_high {
+	/* The 16 bits of standard directory, upper word */
+	unsigned short sd_hi_val;
+	struct	md_sdir_high_fmt sd_hi_fmt;
+}md_sdir_high_t;
+
+
+struct md_sdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	unsigned short	sds_lo_bvec  : 5,
+			sds_lo_unused: 1,
+			sds_lo_state : 3,
+			sds_lo_prio  : 1,
+			sds_lo_ax    : 1,
+			sds_lo_ecc   : 5;
+};
+
+struct md_sdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	unsigned short	sde_lo_ptr   : 6,
+			sde_lo_state : 3,
+			sde_lo_prio  : 1,
+			sde_lo_ax    : 1,
+			sde_lo_ecc   : 5;
+};
+
+
+typedef union md_sdir_low {
+	/* The 16 bits of standard directory, lower word */
+	unsigned short	sd_lo_val;
+	struct	md_sdir_low_exclusive_fmt sde_lo_fmt;
+	struct	md_sdir_low_shared_fmt sds_lo_fmt;
+}md_sdir_low_t;
+
+
+
+struct md_pdir_high_fmt {
+	u64	pd_hi_unused   : 16,
+		pd_hi_bvec     : 38,
+		pd_hi_unused1  : 3,
+		pd_hi_ecc      : 7;
+};
+
+
+typedef union md_pdir_high {
+	/* The 48 bits of standard directory, upper word */
+	u64	pd_hi_val;
+	struct md_pdir_high_fmt pd_hi_fmt;
+}md_pdir_high_t;
+
+
+struct md_pdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	u64	pds_lo_unused	: 16,
+		pds_lo_bvec	: 26,
+		pds_lo_cnt	:  6,
+		pds_lo_state	:  3,
+		pds_lo_ste	:  1,
+		pds_lo_prio	:  4,
+		pds_lo_ax	:  1,
+		pds_lo_ecc	:  7;
+};
+
+struct md_pdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	u64	pde_lo_unused	: 31,
+		pde_lo_ptr	: 11,
+		pde_lo_unused1	:  6,
+		pde_lo_state	:  3,
+		pde_lo_ste	:  1,
+		pde_lo_prio	:  4,
+		pde_lo_ax	:  1,
+		pde_lo_ecc	:  7;
+};
+
+
+typedef union md_pdir_loent {
+	/* The 48 bits of premium directory, lower word */
+	u64	pd_lo_val;
+	struct md_pdir_low_exclusive_fmt pde_lo_fmt;
+	struct md_pdir_low_shared_fmt	pds_lo_fmt;
+}md_pdir_low_t;
+
+
+/*
+ *   the following two "union" definitions and two
+ *   "struct" definitions are used in vmdump.c to
+ *   represent directory memory information.
+ */
+
+typedef	union	md_dir_high	{
+        md_sdir_high_t	md_sdir_high;
+        md_pdir_high_t	md_pdir_high;
+} md_dir_high_t;
+
+typedef	union	md_dir_low	{
+        md_sdir_low_t	md_sdir_low;
+        md_pdir_low_t	md_pdir_low;
+} md_dir_low_t;
+
+typedef	struct	bddir_entry	{
+        md_dir_low_t	md_dir_low;
+        md_dir_high_t	md_dir_high;
+} bddir_entry_t;
+
+typedef struct	dir_mem_entry	{
+        u64		prcpf[MAX_REGIONS];
+        bddir_entry_t	directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+} dir_mem_entry_t;
+
+
+
+typedef union md_perf_sel {
+	u64 	perf_sel_reg;
+	struct	{
+		u64	perf_rsvd : 60,
+		        perf_en   :  1,
+			perf_sel  :  3;
+	} perf_sel_bits;
+} md_perf_sel_t;
+
+typedef union md_perf_cnt {
+	u64	perf_cnt;
+	struct	{
+		u64	perf_rsvd : 44,
+	                perf_cnt  : 20;
+	} perf_cnt_bits;
+} md_perf_cnt_t;
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define DIR_ERROR_VALID_MASK	0xe000000000000000
+#define DIR_ERROR_VALID_SHFT	61
+#define DIR_ERROR_VALID_UCE	0x8000000000000000
+#define DIR_ERROR_VALID_AE	0x4000000000000000
+#define DIR_ERROR_VALID_CE	0x2000000000000000
+
+#define MEM_ERROR_VALID_MASK	0xc000000000000000
+#define MEM_ERROR_VALID_SHFT	62
+#define MEM_ERROR_VALID_UCE	0x8000000000000000
+#define MEM_ERROR_VALID_CE	0x4000000000000000
+
+#define PROTO_ERROR_VALID_MASK	0x8000000000000000
+
+#define MISC_ERROR_VALID_MASK	0x3ff
+
+/*
+ * Mask for hspec address that is stored in the dir error register.
+ * This represents bits 29 through 3.
+ */
+#define DIR_ERR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_SHFT	3
+#define ERROR_ADDR_MASK		0xfffffff8
+#define ERROR_ADDR_SHFT		3
+
+/*
+ * MD_MISC_ERROR register defines.
+ */
+
+#define MMCE_VALID_MASK		0x3ff
+#define MMCE_ILL_MSG_SHFT	8
+#define MMCE_ILL_MSG_MASK	(UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT)
+#define MMCE_ILL_REV_SHFT	6
+#define MMCE_ILL_REV_MASK	(UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT)
+#define MMCE_LONG_PACK_SHFT	4
+#define MMCE_LONG_PACK_MASK	(UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT)
+#define MMCE_SHORT_PACK_SHFT	2
+#define MMCE_SHORT_PACK_MASK	(UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT)
+#define MMCE_BAD_DATA_SHFT	0
+#define MMCE_BAD_DATA_MASK	(UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT)
+
+
+#define MD_PERF_COUNTERS	6
+#define MD_PERF_SETS		6
+
+#define MEM_DIMM_MASK				0xe0000000
+#define MEM_DIMM_SHFT				29
+
+#endif /* _ASM_SN_SN0_HUBMD_H */
diff --git a/include/asm-mips/sn/sn0/hubni.h b/include/asm-mips/sn/sn0/hubni.h
new file mode 100644
index 000000000000..b40d3ef97a12
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hubni.h
@@ -0,0 +1,255 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27.
+ *
+ * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN0_HUBNI_H
+#define _ASM_SGI_SN0_HUBNI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+/*
+ * Hub Network Interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ */
+
+#define NI_BASE			0x600000
+#define NI_BASE_TABLES		0x630000
+
+#define NI_STATUS_REV_ID	0x600000 /* Hub network status, rev, and ID */
+#define NI_PORT_RESET		0x600008 /* Reset the network interface     */
+#define NI_PROTECTION		0x600010 /* NI register access permissions  */
+#define NI_GLOBAL_PARMS		0x600018 /* LLP parameters 		    */
+#define NI_SCRATCH_REG0		0x600100 /* Scratch register 0 (64 bits)    */
+#define NI_SCRATCH_REG1		0x600108 /* Scratch register 1 (64 bits)    */
+#define NI_DIAG_PARMS		0x600110 /* Parameters for diags	    */
+
+#define NI_VECTOR_PARMS		0x600200 /* Vector PIO routing parameters   */
+#define NI_VECTOR		0x600208 /* Vector PIO route 		    */
+#define NI_VECTOR_DATA		0x600210 /* Vector PIO data 		    */
+#define NI_VECTOR_STATUS	0x600300 /* Vector PIO return status 	    */
+#define NI_RETURN_VECTOR	0x600308 /* Vector PIO return vector 	    */
+#define NI_VECTOR_READ_DATA	0x600310 /* Vector PIO read data 	    */
+#define NI_VECTOR_CLEAR		0x600380 /* Vector PIO read & clear status  */
+
+#define NI_IO_PROTECT		0x600400 /* PIO protection bits 	    */
+#define NI_IO_PROT_OVRRD	0x600408 /* PIO protection bit override     */
+
+#define NI_AGE_CPU0_MEMORY	0x600500 /* CPU 0 memory age control 	    */
+#define NI_AGE_CPU0_PIO		0x600508 /* CPU 0 PIO age control 	    */
+#define NI_AGE_CPU1_MEMORY	0x600510 /* CPU 1 memory age control 	    */
+#define NI_AGE_CPU1_PIO		0x600518 /* CPU 1 PIO age control 	    */
+#define NI_AGE_GBR_MEMORY	0x600520 /* GBR memory age control 	    */
+#define NI_AGE_GBR_PIO		0x600528 /* GBR PIO age control 	    */
+#define NI_AGE_IO_MEMORY	0x600530 /* IO memory age control 	    */
+#define NI_AGE_IO_PIO		0x600538 /* IO PIO age control 		    */
+#define NI_AGE_REG_MIN		NI_AGE_CPU0_MEMORY
+#define NI_AGE_REG_MAX		NI_AGE_IO_PIO
+
+#define NI_PORT_PARMS		0x608000 /* LLP Parameters 		    */
+#define NI_PORT_ERROR		0x608008 /* LLP Errors 			    */
+#define NI_PORT_ERROR_CLEAR	0x608088 /* Clear the error bits 	    */
+
+#define NI_META_TABLE0		0x638000 /* First meta routing table entry  */
+#define NI_META_TABLE(_x)	(NI_META_TABLE0 + (8 * (_x)))
+#define NI_META_ENTRIES		32
+
+#define NI_LOCAL_TABLE0		0x638100 /* First local routing table entry */
+#define NI_LOCAL_TABLE(_x)	(NI_LOCAL_TABLE0 + (8 * (_x)))
+#define NI_LOCAL_ENTRIES	16
+
+/*
+ * NI_STATUS_REV_ID mask and shift definitions
+ * Have to use UINT64_CAST instead of 'L' suffix, for assembler.
+ */
+
+#define NSRI_8BITMODE_SHFT	30
+#define NSRI_8BITMODE_MASK	(UINT64_CAST 0x1 << 30)
+#define NSRI_LINKUP_SHFT	29
+#define NSRI_LINKUP_MASK	(UINT64_CAST 0x1 << 29)
+#define NSRI_DOWNREASON_SHFT	28		/* 0=failed, 1=never came   */
+#define NSRI_DOWNREASON_MASK	(UINT64_CAST 0x1 << 28)	/*    out of reset. */
+#define NSRI_MORENODES_SHFT	18
+#define NSRI_MORENODES_MASK	(UINT64_CAST 1 << 18)	/* Max. # of nodes  */
+#define	 MORE_MEMORY		0
+#define	 MORE_NODES		1
+#define NSRI_REGIONSIZE_SHFT	17
+#define NSRI_REGIONSIZE_MASK	(UINT64_CAST 1 << 17)	/* Granularity 	    */
+#define	 REGIONSIZE_FINE	1
+#define	 REGIONSIZE_COARSE	0
+#define NSRI_NODEID_SHFT	8
+#define NSRI_NODEID_MASK	(UINT64_CAST 0x1ff << 8)/* Node (Hub) ID    */
+#define NSRI_REV_SHFT		4
+#define NSRI_REV_MASK		(UINT64_CAST 0xf << 4)	/* Chip Revision    */
+#define NSRI_CHIPID_SHFT	0
+#define NSRI_CHIPID_MASK	(UINT64_CAST 0xf)	/* Chip type ID     */
+
+/*
+ * In fine mode, each node is a region.  In coarse mode, there are
+ * eight nodes per region.
+ */
+#define NASID_TO_FINEREG_SHFT	0
+#define NASID_TO_COARSEREG_SHFT	3
+
+/* NI_PORT_RESET mask definitions */
+
+#define NPR_PORTRESET		(UINT64_CAST 1 << 7)	/* Send warm reset  */
+#define NPR_LINKRESET		(UINT64_CAST 1 << 1)	/* Send link reset  */
+#define NPR_LOCALRESET		(UINT64_CAST 1)		/* Reset entire hub */
+
+/* NI_PROTECTION mask and shift definitions */
+
+#define NPROT_RESETOK		(UINT64_CAST 1)
+
+/* NI_GLOBAL_PARMS mask and shift definitions */
+
+#define NGP_MAXRETRY_SHFT	48		/* Maximum retries  	    */
+#define NGP_MAXRETRY_MASK	(UINT64_CAST 0x3ff << 48)
+#define NGP_TAILTOWRAP_SHFT	32		/* Tail timeout wrap 	    */
+#define NGP_TAILTOWRAP_MASK	(UINT64_CAST 0xffff << 32)
+
+#define NGP_CREDITTOVAL_SHFT	16		/* Tail timeout wrap 	    */
+#define NGP_CREDITTOVAL_MASK	(UINT64_CAST 0xf << 16)
+#define NGP_TAILTOVAL_SHFT	4		/* Tail timeout value 	    */
+#define NGP_TAILTOVAL_MASK	(UINT64_CAST 0xf << 4)
+
+/* NI_DIAG_PARMS mask and shift definitions */
+
+#define NDP_PORTTORESET		(UINT64_CAST 1 << 18)	/* Port tmout reset */
+#define NDP_LLP8BITMODE		(UINT64_CAST 1 << 12)	/* LLP 8-bit mode   */
+#define NDP_PORTDISABLE		(UINT64_CAST 1 <<  6)	/* Port disable     */
+#define NDP_SENDERROR		(UINT64_CAST 1)		/* Send data error  */
+
+/*
+ * NI_VECTOR_PARMS mask and shift definitions.
+ * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS.
+ */
+
+#define NVP_PIOID_SHFT		40
+#define NVP_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVP_WRITEID_SHFT	32
+#define NVP_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVP_ADDRESS_MASK	(UINT64_CAST 0xffff8)	/* Bits 19:3 	    */
+#define NVP_TYPE_SHFT		0
+#define NVP_TYPE_MASK		(UINT64_CAST 0x3)
+
+/* NI_VECTOR_STATUS mask and shift definitions */
+
+#define NVS_VALID		(UINT64_CAST 1 << 63)
+#define NVS_OVERRUN		(UINT64_CAST 1 << 62)
+#define NVS_TARGET_SHFT		51
+#define NVS_TARGET_MASK		(UINT64_CAST 0x3ff << 51)
+#define NVS_PIOID_SHFT		40
+#define NVS_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVS_WRITEID_SHFT	32
+#define NVS_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVS_ADDRESS_MASK	(UINT64_CAST 0xfffffff8)   /* Bits 31:3     */
+#define NVS_TYPE_SHFT		0
+#define NVS_TYPE_MASK		(UINT64_CAST 0x7)
+#define NVS_ERROR_MASK		(UINT64_CAST 0x4)  /* bit set means error */
+
+
+#define	 PIOTYPE_READ		0	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_WRITE		1	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_UNDEFINED	2	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_EXCHANGE	3	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_ADDR_ERR	4	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_CMD_ERR	5	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_PROT_ERR	6	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_UNKNOWN	7	/* VECTOR_STATUS only 		    */
+
+/* NI_AGE_XXX mask and shift definitions */
+
+#define NAGE_VCH_SHFT		10
+#define NAGE_VCH_MASK		(UINT64_CAST 3 << 10)
+#define NAGE_CC_SHFT		8
+#define NAGE_CC_MASK		(UINT64_CAST 3 << 8)
+#define NAGE_AGE_SHFT		0
+#define NAGE_AGE_MASK		(UINT64_CAST 0xff)
+#define NAGE_MASK		(NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK)
+
+#define	 VCHANNEL_A		0
+#define	 VCHANNEL_B		1
+#define	 VCHANNEL_ANY		2
+
+/* NI_PORT_PARMS mask and shift definitions */
+
+#define NPP_NULLTO_SHFT		10
+#define NPP_NULLTO_MASK		(UINT64_CAST 0x3f << 16)
+#define NPP_MAXBURST_SHFT	0
+#define NPP_MAXBURST_MASK	(UINT64_CAST 0x3ff)
+#define NPP_RESET_DFLT_HUB20	((UINT64_CAST 1	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+#define NPP_RESET_DEFAULTS	((UINT64_CAST 6	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+
+
+/* NI_PORT_ERROR mask and shift definitions */
+
+#define NPE_LINKRESET		(UINT64_CAST 1 << 37)
+#define NPE_INTERNALERROR	(UINT64_CAST 1 << 36)
+#define NPE_BADMESSAGE		(UINT64_CAST 1 << 35)
+#define NPE_BADDEST		(UINT64_CAST 1 << 34)
+#define NPE_FIFOOVERFLOW	(UINT64_CAST 1 << 33)
+#define NPE_CREDITTO_SHFT	28
+#define NPE_CREDITTO_MASK	(UINT64_CAST 0xf << 28)
+#define NPE_TAILTO_SHFT		24
+#define NPE_TAILTO_MASK		(UINT64_CAST 0xf << 24)
+#define NPE_RETRYCOUNT_SHFT	16
+#define NPE_RETRYCOUNT_MASK	(UINT64_CAST 0xff << 16)
+#define NPE_CBERRCOUNT_SHFT	8
+#define NPE_CBERRCOUNT_MASK	(UINT64_CAST 0xff << 8)
+#define NPE_SNERRCOUNT_SHFT	0
+#define NPE_SNERRCOUNT_MASK	(UINT64_CAST 0xff << 0)
+#define NPE_MASK		0x3effffffff
+
+#define NPE_COUNT_MAX		0xff
+
+#define NPE_FATAL_ERRORS	(NPE_LINKRESET | NPE_INTERNALERROR |	\
+				 NPE_BADMESSAGE | NPE_BADDEST |		\
+				 NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK |	\
+				 NPE_TAILTO_MASK)
+
+/* NI_META_TABLE mask and shift definitions */
+
+#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+/* NI_LOCAL_TABLE mask and shift definitions */
+
+#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+#ifndef __ASSEMBLY__
+
+typedef union	hubni_port_error_u {
+	u64	nipe_reg_value;
+	struct {
+	    u64	nipe_rsvd:	26,	/* unused */
+		nipe_lnk_reset:	 1,	/* link reset */
+		nipe_intl_err:	 1,	/* internal error */
+		nipe_bad_msg:	 1,	/* bad message */
+		nipe_bad_dest:	 1,	/* bad dest	*/
+		nipe_fifo_ovfl:	 1,	/* fifo overflow */
+		nipe_rsvd1:	 1,	/* unused */
+		nipe_credit_to:	 4,	/* credit timeout */
+		nipe_tail_to:	 4,	/* tail timeout */
+		nipe_retry_cnt:	 8,	/* retry error count */
+		nipe_cb_cnt:	 8,	/* checkbit error count */
+		nipe_sn_cnt:	 8;	/* sequence number count */
+	} nipe_fields_s;
+} hubni_port_error_t;
+
+#define NI_LLP_RETRY_MAX	0xff
+#define NI_LLP_CB_MAX		0xff
+#define NI_LLP_SN_MAX		0xff
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h
new file mode 100644
index 000000000000..355bba8552e3
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hubpi.h
@@ -0,0 +1,427 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBPI_H
+#define	_ASM_SN_SN0_HUBPI_H
+
+#include <linux/types.h>
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * All register "addresses" are actually offsets.  Use the LOCAL_HUB
+ * or REMOTE_HUB macros to synthesize an actual address
+ */
+
+#define PI_BASE			0x000000
+
+/* General protection and control registers */
+
+#define PI_CPU_PROTECT		0x000000 /* CPU Protection 		    */
+#define PI_PROT_OVERRD		0x000008 /* Clear CPU Protection bit 	    */
+#define	PI_IO_PROTECT		0x000010 /* Interrupt Pending Protection    */
+#define PI_REGION_PRESENT	0x000018 /* Indicates whether region exists */
+#define PI_CPU_NUM		0x000020 /* CPU Number ID 		    */
+#define PI_CALIAS_SIZE		0x000028 /* Cached Alias Size 		    */
+#define PI_MAX_CRB_TIMEOUT	0x000030 /* Maximum Timeout for CRB 	    */
+#define PI_CRB_SFACTOR		0x000038 /* Scale factor for CRB timeout    */
+
+/* CALIAS values */
+#define PI_CALIAS_SIZE_0	0
+#define PI_CALIAS_SIZE_4K	1
+#define PI_CALIAS_SIZE_8K	2
+#define PI_CALIAS_SIZE_16K	3
+#define PI_CALIAS_SIZE_32K	4
+#define PI_CALIAS_SIZE_64K	5
+#define PI_CALIAS_SIZE_128K	6
+#define PI_CALIAS_SIZE_256K	7
+#define PI_CALIAS_SIZE_512K	8
+#define PI_CALIAS_SIZE_1M	9
+#define PI_CALIAS_SIZE_2M	10
+#define PI_CALIAS_SIZE_4M	11
+#define PI_CALIAS_SIZE_8M	12
+#define PI_CALIAS_SIZE_16M	13
+#define PI_CALIAS_SIZE_32M	14
+#define PI_CALIAS_SIZE_64M	15
+
+/* Processor control and status checking */
+
+#define PI_CPU_PRESENT_A	0x000040 /* CPU Present A 		    */
+#define PI_CPU_PRESENT_B	0x000048 /* CPU Present B 		    */
+#define PI_CPU_ENABLE_A		0x000050 /* CPU Enable A 		    */
+#define PI_CPU_ENABLE_B		0x000058 /* CPU Enable B 		    */
+#define PI_REPLY_LEVEL		0x000060 /* Reply Level		 	    */
+#define PI_HARDRESET_BIT	0x020068 /* Bit cleared by s/w on SR	    */
+#define PI_NMI_A		0x000070 /* NMI to CPU A 		    */
+#define PI_NMI_B		0x000078 /* NMI to CPU B 		    */
+#define PI_NMI_OFFSET		(PI_NMI_B - PI_NMI_A)
+#define PI_SOFTRESET		0x000080 /* Softreset (to both CPUs) 	    */
+
+/* Regular Interrupt register checking.  */
+
+#define PI_INT_PEND_MOD		0x000090 /* Write to set pending ints	    */
+#define PI_INT_PEND0		0x000098 /* Read to get pending ints 	    */
+#define PI_INT_PEND1		0x0000a0 /* Read to get pending ints 	    */
+#define PI_INT_MASK0_A		0x0000a8 /* Interrupt Mask 0 for CPU A 	    */
+#define PI_INT_MASK1_A		0x0000b0 /* Interrupt Mask 1 for CPU A 	    */
+#define PI_INT_MASK0_B		0x0000b8 /* Interrupt Mask 0 for CPU B 	    */
+#define PI_INT_MASK1_B		0x0000c0 /* Interrupt Mask 1 for CPU B 	    */
+
+#define PI_INT_MASK_OFFSET	0x10	 /* Offset from A to B 		    */
+
+/* Crosscall interrupts */
+
+#define PI_CC_PEND_SET_A	0x0000c8 /* CC Interrupt Pending Set, CPU A */
+#define PI_CC_PEND_SET_B	0x0000d0 /* CC Interrupt Pending Set, CPU B */
+#define PI_CC_PEND_CLR_A	0x0000d8 /* CC Interrupt Pending Clr, CPU A */
+#define PI_CC_PEND_CLR_B	0x0000e0 /* CC Interrupt Pending Clr, CPU B */
+#define PI_CC_MASK		0x0000e8 /* CC Interrupt mask 		    */
+
+#define PI_INT_SET_OFFSET	0x08	 /* Offset from A to B 		    */
+
+/* Realtime Counter and Profiler control registers */
+
+#define PI_RT_COUNT		0x030100 /* Real Time Counter 		    */
+#define PI_RT_COMPARE_A		0x000108 /* Real Time Compare A 	    */
+#define PI_RT_COMPARE_B		0x000110 /* Real Time Compare B 	    */
+#define PI_PROFILE_COMPARE	0x000118 /* L5 int to both cpus when == RTC */
+#define PI_RT_PEND_A		0x000120 /* Set if RT int for A pending     */
+#define PI_RT_PEND_B		0x000128 /* Set if RT int for B pending     */
+#define PI_PROF_PEND_A		0x000130 /* Set if Prof int for A pending   */
+#define PI_PROF_PEND_B		0x000138 /* Set if Prof int for B pending   */
+#define PI_RT_EN_A		0x000140 /* RT int for CPU A enable 	    */
+#define PI_RT_EN_B		0x000148 /* RT int for CPU B enable 	    */
+#define PI_PROF_EN_A		0x000150 /* PROF int for CPU A enable 	    */
+#define PI_PROF_EN_B		0x000158 /* PROF int for CPU B enable 	    */
+#define PI_RT_LOCAL_CTRL	0x000160 /* RT control register 	    */
+#define PI_RT_FILTER_CTRL	0x000168 /* GCLK Filter control register    */
+
+#define PI_COUNT_OFFSET		0x08	 /* A to B offset for all counts    */
+
+/* Built-In Self Test support */
+
+#define PI_BIST_WRITE_DATA	0x000200 /* BIST write data 		    */
+#define PI_BIST_READ_DATA	0x000208 /* BIST read data 		    */
+#define PI_BIST_COUNT_TARG	0x000210 /* BIST Count and Target 	    */
+#define PI_BIST_READY		0x000218 /* BIST Ready indicator 	    */
+#define PI_BIST_SHIFT_LOAD	0x000220 /* BIST control 		    */
+#define PI_BIST_SHIFT_UNLOAD	0x000228 /* BIST control 		    */
+#define PI_BIST_ENTER_RUN	0x000230 /* BIST control 		    */
+
+/* Graphics control registers */
+
+#define PI_GFX_PAGE_A		0x000300 /* Graphics page A 		    */
+#define PI_GFX_CREDIT_CNTR_A	0x000308 /* Graphics credit counter A 	    */
+#define PI_GFX_BIAS_A		0x000310 /* Graphics bias A 		    */
+#define PI_GFX_INT_CNTR_A	0x000318 /* Graphics interrupt counter A    */
+#define PI_GFX_INT_CMP_A	0x000320 /* Graphics interrupt comparator A */
+#define PI_GFX_PAGE_B		0x000328 /* Graphics page B 		    */
+#define PI_GFX_CREDIT_CNTR_B	0x000330 /* Graphics credit counter B 	    */
+#define PI_GFX_BIAS_B		0x000338 /* Graphics bias B 		    */
+#define PI_GFX_INT_CNTR_B	0x000340 /* Graphics interrupt counter B    */
+#define PI_GFX_INT_CMP_B	0x000348 /* Graphics interrupt comparator B */
+
+#define PI_GFX_OFFSET		(PI_GFX_PAGE_B - PI_GFX_PAGE_A)
+#define PI_GFX_PAGE_ENABLE	0x0000010000000000LL
+
+/* Error and timeout registers */
+#define PI_ERR_INT_PEND		0x000400 /* Error Interrupt Pending	    */
+#define PI_ERR_INT_MASK_A	0x000408 /* Error Interrupt mask for CPU A  */
+#define PI_ERR_INT_MASK_B	0x000410 /* Error Interrupt mask for CPU B  */
+#define PI_ERR_STACK_ADDR_A	0x000418 /* Error stack address for CPU A   */
+#define PI_ERR_STACK_ADDR_B	0x000420 /* Error stack address for CPU B   */
+#define PI_ERR_STACK_SIZE	0x000428 /* Error Stack Size 		    */
+#define PI_ERR_STATUS0_A	0x000430 /* Error Status 0A 		    */
+#define PI_ERR_STATUS0_A_RCLR	0x000438 /* Error Status 0A clear on read   */
+#define PI_ERR_STATUS1_A	0x000440 /* Error Status 1A 		    */
+#define PI_ERR_STATUS1_A_RCLR	0x000448 /* Error Status 1A clear on read   */
+#define PI_ERR_STATUS0_B	0x000450 /* Error Status 0B 		    */
+#define PI_ERR_STATUS0_B_RCLR	0x000458 /* Error Status 0B clear on read   */
+#define PI_ERR_STATUS1_B	0x000460 /* Error Status 1B 		    */
+#define PI_ERR_STATUS1_B_RCLR	0x000468 /* Error Status 1B clear on read   */
+#define PI_SPOOL_CMP_A		0x000470 /* Spool compare for CPU A 	    */
+#define PI_SPOOL_CMP_B		0x000478 /* Spool compare for CPU B 	    */
+#define PI_CRB_TIMEOUT_A	0x000480 /* Timed out CRB entries for A     */
+#define PI_CRB_TIMEOUT_B	0x000488 /* Timed out CRB entries for B     */
+#define PI_SYSAD_ERRCHK_EN	0x000490 /* Enables SYSAD error checking    */
+#define PI_BAD_CHECK_BIT_A	0x000498 /* Force SYSAD check bit error     */
+#define PI_BAD_CHECK_BIT_B	0x0004a0 /* Force SYSAD check bit error     */
+#define PI_NACK_CNT_A		0x0004a8 /* Consecutive NACK counter 	    */
+#define PI_NACK_CNT_B		0x0004b0 /* 	"	" for CPU B 	    */
+#define PI_NACK_CMP		0x0004b8 /* NACK count compare		    */
+#define PI_STACKADDR_OFFSET	(PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
+#define PI_ERRSTAT_OFFSET	(PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
+#define PI_RDCLR_OFFSET		(PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A)
+
+/* Bits in PI_ERR_INT_PEND */
+#define PI_ERR_SPOOL_CMP_B	0x00000001	/* Spool end hit high water */
+#define PI_ERR_SPOOL_CMP_A	0x00000002
+#define PI_ERR_SPUR_MSG_B	0x00000004	/* Spurious message intr.   */
+#define PI_ERR_SPUR_MSG_A	0x00000008
+#define PI_ERR_WRB_TERR_B	0x00000010	/* WRB TERR		    */
+#define PI_ERR_WRB_TERR_A	0x00000020
+#define PI_ERR_WRB_WERR_B	0x00000040	/* WRB WERR 		    */
+#define PI_ERR_WRB_WERR_A	0x00000080
+#define PI_ERR_SYSSTATE_B	0x00000100	/* SysState parity error    */
+#define PI_ERR_SYSSTATE_A	0x00000200
+#define PI_ERR_SYSAD_DATA_B	0x00000400	/* SysAD data parity error  */
+#define PI_ERR_SYSAD_DATA_A	0x00000800
+#define PI_ERR_SYSAD_ADDR_B	0x00001000	/* SysAD addr parity error  */
+#define PI_ERR_SYSAD_ADDR_A	0x00002000
+#define PI_ERR_SYSCMD_DATA_B	0x00004000	/* SysCmd data parity error */
+#define PI_ERR_SYSCMD_DATA_A	0x00008000
+#define PI_ERR_SYSCMD_ADDR_B	0x00010000	/* SysCmd addr parity error */
+#define PI_ERR_SYSCMD_ADDR_A	0x00020000
+#define PI_ERR_BAD_SPOOL_B	0x00040000	/* Error spooling to memory */
+#define PI_ERR_BAD_SPOOL_A	0x00080000
+#define PI_ERR_UNCAC_UNCORR_B	0x00100000	/* Uncached uncorrectable   */
+#define PI_ERR_UNCAC_UNCORR_A	0x00200000
+#define PI_ERR_SYSSTATE_TAG_B	0x00400000	/* SysState tag parity error */
+#define PI_ERR_SYSSTATE_TAG_A	0x00800000
+#define PI_ERR_MD_UNCORR	0x01000000	/* Must be cleared in MD    */
+
+#define PI_ERR_CLEAR_ALL_A	0x00aaaaaa
+#define PI_ERR_CLEAR_ALL_B	0x00555555
+
+
+/*
+ * The following three macros define all possible error int pends.
+ */
+
+#define PI_FATAL_ERR_CPU_A	(PI_ERR_SYSSTATE_TAG_A 	| \
+				 PI_ERR_BAD_SPOOL_A 	| \
+				 PI_ERR_SYSCMD_ADDR_A 	| \
+				 PI_ERR_SYSCMD_DATA_A 	| \
+				 PI_ERR_SYSAD_ADDR_A 	| \
+				 PI_ERR_SYSAD_DATA_A	| \
+				 PI_ERR_SYSSTATE_A)
+
+#define PI_MISC_ERR_CPU_A	(PI_ERR_UNCAC_UNCORR_A 	| \
+				 PI_ERR_WRB_WERR_A 	| \
+				 PI_ERR_WRB_TERR_A 	| \
+				 PI_ERR_SPUR_MSG_A 	| \
+				 PI_ERR_SPOOL_CMP_A)
+
+#define PI_FATAL_ERR_CPU_B	(PI_ERR_SYSSTATE_TAG_B 	| \
+				 PI_ERR_BAD_SPOOL_B 	| \
+				 PI_ERR_SYSCMD_ADDR_B 	| \
+				 PI_ERR_SYSCMD_DATA_B 	| \
+				 PI_ERR_SYSAD_ADDR_B 	| \
+				 PI_ERR_SYSAD_DATA_B	| \
+				 PI_ERR_SYSSTATE_B)
+
+#define PI_MISC_ERR_CPU_B 	(PI_ERR_UNCAC_UNCORR_B  | \
+				 PI_ERR_WRB_WERR_B 	| \
+				 PI_ERR_WRB_TERR_B 	| \
+				 PI_ERR_SPUR_MSG_B 	| \
+				 PI_ERR_SPOOL_CMP_B)
+
+#define PI_ERR_GENERIC	(PI_ERR_MD_UNCORR)
+
+/*
+ * Error types for PI_ERR_STATUS0_[AB] and error stack:
+ * Use the write types if WRBRRB is 1 else use the read types
+ */
+
+/* Fields in PI_ERR_STATUS0_[AB] */
+#define PI_ERR_ST0_TYPE_MASK	0x0000000000000007
+#define PI_ERR_ST0_TYPE_SHFT	0
+#define PI_ERR_ST0_REQNUM_MASK	0x0000000000000038
+#define PI_ERR_ST0_REQNUM_SHFT	3
+#define PI_ERR_ST0_SUPPL_MASK	0x000000000001ffc0
+#define PI_ERR_ST0_SUPPL_SHFT	6
+#define PI_ERR_ST0_CMD_MASK	0x0000000001fe0000
+#define PI_ERR_ST0_CMD_SHFT	17
+#define PI_ERR_ST0_ADDR_MASK	0x3ffffffffe000000
+#define PI_ERR_ST0_ADDR_SHFT	25
+#define PI_ERR_ST0_OVERRUN_MASK	0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT	62
+#define PI_ERR_ST0_VALID_MASK	0x8000000000000000
+#define PI_ERR_ST0_VALID_SHFT	63
+
+/* Fields in PI_ERR_STATUS1_[AB] */
+#define PI_ERR_ST1_SPOOL_MASK	0x00000000001fffff
+#define PI_ERR_ST1_SPOOL_SHFT	0
+#define PI_ERR_ST1_TOUTCNT_MASK	0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT	21
+#define PI_ERR_ST1_INVCNT_MASK	0x0000007fe0000000
+#define PI_ERR_ST1_INVCNT_SHFT	29
+#define PI_ERR_ST1_CRBNUM_MASK	0x0000038000000000
+#define PI_ERR_ST1_CRBNUM_SHFT	39
+#define PI_ERR_ST1_WRBRRB_MASK	0x0000040000000000
+#define PI_ERR_ST1_WRBRRB_SHFT	42
+#define PI_ERR_ST1_CRBSTAT_MASK	0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT	43
+#define PI_ERR_ST1_MSGSRC_MASK	0xffe0000000000000
+#define PI_ERR_ST1_MSGSRC_SHFT	53
+
+/* Fields in the error stack */
+#define PI_ERR_STK_TYPE_MASK	0x0000000000000003
+#define PI_ERR_STK_TYPE_SHFT	0
+#define PI_ERR_STK_SUPPL_MASK	0x0000000000000038
+#define PI_ERR_STK_SUPPL_SHFT	3
+#define PI_ERR_STK_REQNUM_MASK	0x00000000000001c0
+#define PI_ERR_STK_REQNUM_SHFT	6
+#define PI_ERR_STK_CRBNUM_MASK	0x0000000000000e00
+#define PI_ERR_STK_CRBNUM_SHFT	9
+#define PI_ERR_STK_WRBRRB_MASK	0x0000000000001000
+#define PI_ERR_STK_WRBRRB_SHFT	12
+#define PI_ERR_STK_CRBSTAT_MASK	0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT	13
+#define PI_ERR_STK_CMD_MASK	0x000000007f800000
+#define PI_ERR_STK_CMD_SHFT	23
+#define PI_ERR_STK_ADDR_MASK	0xffffffff80000000
+#define PI_ERR_STK_ADDR_SHFT	31
+
+/* Error type in the error status or stack on Read CRBs */
+#define PI_ERR_RD_PRERR		1
+#define PI_ERR_RD_DERR		2
+#define PI_ERR_RD_TERR		3
+
+/* Error type in the error status or stack on Write CRBs */
+#define PI_ERR_WR_WERR		0
+#define PI_ERR_WR_PWERR		1
+#define PI_ERR_WR_TERR		3
+
+/* Read or Write CRB in error status or stack */
+#define PI_ERR_RRB	0
+#define PI_ERR_WRB	1
+#define PI_ERR_ANY_CRB	2
+
+/* Address masks in the error status and error stack are not the same */
+#define ERR_STK_ADDR_SHFT	7
+#define ERR_STAT0_ADDR_SHFT	3
+
+#define PI_MIN_STACK_SIZE 4096	/* For figuring out the size to set */
+#define PI_STACK_SIZE_SHFT	12	/* 4k */
+
+#define ERR_STACK_SIZE_BYTES(_sz) \
+       ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * format of error stack and error status registers.
+ */
+
+struct err_stack_format {
+	u64	sk_addr	   : 33,   /* address */
+		sk_cmd	   :  8,   /* message command */
+		sk_crb_sts : 10,   /* status from RRB or WRB */
+		sk_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		sk_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		sk_t5_req  :  3,   /* RRB T5 request number */
+		sk_suppl   :  3,   /* lowest 3 bit of supplemental */
+		sk_err_type:  3;   /* error type	*/
+};
+
+typedef union pi_err_stack {
+	u64	pi_stk_word;
+	struct	err_stack_format pi_stk_fmt;
+} pi_err_stack_t;
+
+struct err_status0_format {
+	u64	s0_valid   :  1,   /* Valid */
+		s0_ovr_run :  1,   /* Overrun, spooled to memory */
+		s0_addr	   : 37,   /* address */
+		s0_cmd	   :  8,   /* message command */
+		s0_supl	   : 11,   /* message supplemental field */
+		s0_t5_req  :  3,   /* RRB T5 request number */
+		s0_err_type:  3;   /* error type */
+};
+
+typedef union pi_err_stat0 {
+	u64	pi_stat0_word;
+	struct err_status0_format pi_stat0_fmt;
+} pi_err_stat0_t;
+
+struct err_status1_format {
+	u64	s1_src	   : 11,   /* message source */
+		s1_crb_sts : 10,   /* status from RRB or WRB */
+		s1_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		s1_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		s1_inval_cnt:10,   /* signed invalidate counter RRB */
+		s1_to_cnt  :  8,   /* crb timeout counter */
+		s1_spl_cnt : 21;   /* number spooled to memory */
+};
+
+typedef union pi_err_stat1 {
+	u64	pi_stat1_word;
+	struct err_status1_format pi_stat1_fmt;
+} pi_err_stat1_t;
+
+typedef u64	rtc_time_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* Bits in PI_SYSAD_ERRCHK_EN */
+#define PI_SYSAD_ERRCHK_ECCGEN	0x01	/* Enable ECC generation	    */
+#define PI_SYSAD_ERRCHK_QUALGEN	0x02	/* Enable data quality signal gen.  */
+#define PI_SYSAD_ERRCHK_SADP	0x04	/* Enable SysAD parity checking     */
+#define PI_SYSAD_ERRCHK_CMDP	0x08	/* Enable SysCmd parity checking    */
+#define PI_SYSAD_ERRCHK_STATE	0x10	/* Enable SysState parity checking  */
+#define PI_SYSAD_ERRCHK_QUAL	0x20	/* Enable data quality checking     */
+#define PI_SYSAD_CHECK_ALL	0x3f	/* Generate and check all signals.  */
+
+/* Interrupt pending bits on R10000 */
+
+#define HUB_IP_PEND0		0x0400
+#define HUB_IP_PEND1_CC		0x0800
+#define HUB_IP_RT		0x1000
+#define HUB_IP_PROF		0x2000
+#define HUB_IP_ERROR		0x4000
+#define HUB_IP_MASK		0x7c00
+
+/* PI_RT_LOCAL_CTRL mask and shift definitions */
+
+#define PRLC_USE_INT_SHFT	16
+#define PRLC_USE_INT_MASK	(UINT64_CAST 1 << 16)
+#define PRLC_USE_INT		(UINT64_CAST 1 << 16)
+#define PRLC_GCLK_SHFT		15
+#define PRLC_GCLK_MASK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK_COUNT_SHFT	8
+#define PRLC_GCLK_COUNT_MASK	(UINT64_CAST 0x7f << 8)
+#define PRLC_MAX_COUNT_SHFT	1
+#define PRLC_MAX_COUNT_MASK	(UINT64_CAST 0x7f << 1)
+#define PRLC_GCLK_EN_SHFT	0
+#define PRLC_GCLK_EN_MASK	(UINT64_CAST 1)
+#define PRLC_GCLK_EN		(UINT64_CAST 1)
+
+/* PI_RT_FILTER_CTRL mask and shift definitions */
+
+#if 0
+/*
+ * XXX - This register's definition has changed, but it's only implemented
+ * in Hub 2.
+ */
+#define PRFC_DROP_COUNT_SHFT	27
+#define PRFC_DROP_COUNT_MASK	(UINT64_CAST 0x3ff << 27)
+#define PRFC_DROP_CTR_SHFT	18
+#define PRFC_DROP_CTR_MASK	(UINT64_CAST 0x1ff << 18)
+#define PRFC_MASK_ENABLE_SHFT	10
+#define PRFC_MASK_ENABLE_MASK	(UINT64_CAST 0x7f << 10)
+#define PRFC_MASK_CTR_SHFT	2
+#define PRFC_MASK_CTR_MASK	(UINT64_CAST 0xff << 2)
+#define PRFC_OFFSET_SHFT	0
+#define PRFC_OFFSET_MASK	(UINT64_CAST 3)
+#endif /* 0 */
+
+
+/*
+ * Bits for NACK_CNT_A/B and NACK_CMP
+ */
+#define PI_NACK_CNT_EN_SHFT	20
+#define PI_NACK_CNT_EN_MASK	0x100000
+#define PI_NACK_CNT_MASK	0x0fffff
+#define PI_NACK_CNT_MAX		0x0fffff
+
+#endif /* _ASM_SN_SN0_HUBPI_H */
diff --git a/include/asm-mips/sn/sn0/ip27.h b/include/asm-mips/sn/sn0/ip27.h
new file mode 100644
index 000000000000..ade0e974dd78
--- /dev/null
+++ b/include/asm-mips/sn/sn0/ip27.h
@@ -0,0 +1,92 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/IP27.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_IP27_H
+#define _ASM_SN_SN0_IP27_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * Simple definitions for the masks which remove SW bits from pte.
+ */
+
+#define TLBLO_HWBITSHIFT	0		/* Shift value, for masking */
+
+#ifndef __ASSEMBLY__
+
+#define CAUSE_BERRINTR 		IE_IRQ5
+
+#define ECCF_CACHE_ERR  0
+#define ECCF_TAGLO      1
+#define ECCF_ECC        2
+#define ECCF_ERROREPC   3
+#define ECCF_PADDR      4
+#define ECCF_SIZE       (5 * sizeof(long))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
+ * the processor number of the calling processor.  The proc parameters
+ * must be a register.
+ */
+#define KL_GET_CPUNUM(proc) 				\
+	dli	proc, LOCAL_HUB(0); 			\
+	ld	proc, PI_CPU_NUM(proc)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * R10000 status register interrupt bit mask usage for IP27.
+ */
+#define SRB_SWTIMO	IE_SW0		/* 0x0100 */
+#define SRB_NET		IE_SW1		/* 0x0200 */
+#define SRB_DEV0	IE_IRQ0		/* 0x0400 */
+#define SRB_DEV1	IE_IRQ1		/* 0x0800 */
+#define SRB_TIMOCLK	IE_IRQ2		/* 0x1000 */
+#define SRB_PROFCLK	IE_IRQ3		/* 0x2000 */
+#define SRB_ERR		IE_IRQ4		/* 0x4000 */
+#define SRB_SCHEDCLK	IE_IRQ5		/* 0x8000 */
+
+#define SR_IBIT_HI	SRB_DEV0
+#define SR_IBIT_PROF	SRB_PROFCLK
+
+#define SRB_SWTIMO_IDX		0
+#define SRB_NET_IDX		1
+#define SRB_DEV0_IDX		2
+#define SRB_DEV1_IDX		3
+#define SRB_TIMOCLK_IDX		4
+#define SRB_PROFCLK_IDX		5
+#define SRB_ERR_IDX		6
+#define SRB_SCHEDCLK_IDX	7
+
+#define NUM_CAUSE_INTRS		8
+
+#define SCACHE_LINESIZE	128
+#define SCACHE_LINEMASK	(SCACHE_LINESIZE - 1)
+
+#include <asm/sn/addrs.h>
+
+#define LED_CYCLE_MASK  0x0f
+#define LED_CYCLE_SHFT  4
+
+#define SEND_NMI(_nasid, _slice)	\
+          REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
+/* Sanity hazzard ...  Below all the Origin hacks are following.  */
+
+#define SN00_BRIDGE		0x9200000008000000
+#define SN00I_BRIDGE0		0x920000000b000000
+#define SN00I_BRIDGE1		0x920000000e000000
+#define SN00I_BRIDGE2		0x920000000f000000
+
+#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/include/asm-mips/sn/sn0/sn0_fru.h b/include/asm-mips/sn/sn0/sn0_fru.h
new file mode 100644
index 000000000000..82c6377c275a
--- /dev/null
+++ b/include/asm-mips/sn/sn0/sn0_fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/sn0_fru.h>
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_SN0_FRU_H
+#define _ASM_SN_SN0_SN0_FRU_H
+
+#define MAX_DIMMS			8	 /* max # of dimm banks */
+#define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+	confidence_t km_confidence; /* confidence level that the memory is bad
+				     * is this necessary ?
+				     */
+	confidence_t km_dimm[MAX_DIMMS];
+	                            /* confidence level that dimm[i] is bad
+				     *I think this is the right number
+				     */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+	confidence_t  	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t  	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t  	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t  	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+typedef struct kf_pci_bus_s {
+	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
+	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
+	                                /* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+#endif /* _ASM_SN_SN0_SN0_FRU_H */
diff --git a/include/asm-mips/sn/sn_private.h b/include/asm-mips/sn/sn_private.h
new file mode 100644
index 000000000000..1a2c3025bf28
--- /dev/null
+++ b/include/asm-mips/sn/sn_private.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SN_SN_PRIVATE_H
+#define __ASM_SN_SN_PRIVATE_H
+
+#include <asm/sn/types.h>
+
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
+extern cnodeid_t get_compact_nodeid(void);
+extern void hub_rtc_init(cnodeid_t);
+extern void cpu_time_init(void);
+extern void per_cpu_init(void);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void setup_replication_mask(void);
+extern void replicate_kernel_text(void);
+extern pfn_t node_getfirstfree(cnodeid_t);
+
+#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/include/asm-mips/sn/types.h b/include/asm-mips/sn/types.h
new file mode 100644
index 000000000000..74d0bb260b86
--- /dev/null
+++ b/include/asm-mips/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_TYPES_H
+#define _ASM_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef unsigned long	cnodemask_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed short	cnodeid_t;	/* node id in compact-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef signed short	moduleid_t;	/* user-visible module number type */
+typedef signed short	cmoduleid_t;	/* kernel compact module id type */
+typedef unsigned char	clusterid_t;	/* Clusterid of the cell */
+typedef unsigned long 	pfn_t;
+
+typedef dev_t		vertex_hdl_t;	/* hardware graph vertex handle */
+
+#endif /* _ASM_SN_TYPES_H */
diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h
new file mode 100644
index 000000000000..b3bc698dfdee
--- /dev/null
+++ b/include/asm-mips/sni.h
@@ -0,0 +1,107 @@
+/*
+ * SNI specific definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1998 by Ralf Baechle
+ */
+#ifndef __ASM_SNI_H
+#define __ASM_SNI_H
+
+#define SNI_PORT_BASE		0xb4000000
+
+/*
+ * ASIC PCI registers for little endian configuration.
+ */
+#ifndef __MIPSEL__
+#error "Fix me for big endian"
+#endif
+#define PCIMT_UCONF		0xbfff0000
+#define PCIMT_IOADTIMEOUT2	0xbfff0008
+#define PCIMT_IOMEMCONF		0xbfff0010
+#define PCIMT_IOMMU		0xbfff0018
+#define PCIMT_IOADTIMEOUT1	0xbfff0020
+#define PCIMT_DMAACCESS		0xbfff0028
+#define PCIMT_DMAHIT		0xbfff0030
+#define PCIMT_ERRSTATUS		0xbfff0038
+#define PCIMT_ERRADDR		0xbfff0040
+#define PCIMT_SYNDROME		0xbfff0048
+#define PCIMT_ITPEND		0xbfff0050
+#define  IT_INT2		0x01
+#define  IT_INTD		0x02
+#define  IT_INTC		0x04
+#define  IT_INTB		0x08
+#define  IT_INTA		0x10
+#define  IT_EISA		0x20
+#define  IT_SCSI		0x40
+#define  IT_ETH			0x80
+#define PCIMT_IRQSEL		0xbfff0058
+#define PCIMT_TESTMEM		0xbfff0060
+#define PCIMT_ECCREG		0xbfff0068
+#define PCIMT_CONFIG_ADDRESS	0xbfff0070
+#define PCIMT_ASIC_ID		0xbfff0078	/* read */
+#define PCIMT_SOFT_RESET	0xbfff0078	/* write */
+#define PCIMT_PIA_OE		0xbfff0080
+#define PCIMT_PIA_DATAOUT	0xbfff0088
+#define PCIMT_PIA_DATAIN	0xbfff0090
+#define PCIMT_CACHECONF		0xbfff0098
+#define PCIMT_INVSPACE		0xbfff00a0
+#define PCIMT_PCI_CONF		0xbfff0100
+
+/*
+ * Data port for the PCI bus.
+ */
+#define PCIMT_CONFIG_DATA	0xb4000cfc
+
+/*
+ * Board specific registers
+ */
+#define PCIMT_CSMSR		0xbfd00000
+#define PCIMT_CSSWITCH		0xbfd10000
+#define PCIMT_CSITPEND		0xbfd20000
+#define PCIMT_AUTO_PO_EN	0xbfd30000
+#define PCIMT_CLR_TEMP		0xbfd40000
+#define PCIMT_AUTO_PO_DIS	0xbfd50000
+#define PCIMT_EXMSR		0xbfd60000
+#define PCIMT_UNUSED1		0xbfd70000
+#define PCIMT_CSWCSM		0xbfd80000
+#define PCIMT_UNUSED2		0xbfd90000
+#define PCIMT_CSLED		0xbfda0000
+#define PCIMT_CSMAPISA		0xbfdb0000
+#define PCIMT_CSRSTBP		0xbfdc0000
+#define PCIMT_CLRPOFF		0xbfdd0000
+#define PCIMT_CSTIMER		0xbfde0000
+#define PCIMT_PWDN		0xbfdf0000
+
+/*
+ * Interrupt 0-16 are EISA interrupts.  Interrupts from 16 on are assigned
+ * to the other interrupts generated by ASIC PCI.
+ *
+ * INT2 is a wired-or of the push button interrupt, high temperature interrupt
+ * ASIC PCI interrupt.
+ */
+#define PCIMT_KEYBOARD_IRQ	 1
+#define PCIMT_IRQ_INT2		16
+#define PCIMT_IRQ_INTD		17
+#define PCIMT_IRQ_INTC		18
+#define PCIMT_IRQ_INTB		19
+#define PCIMT_IRQ_INTA		20
+#define PCIMT_IRQ_EISA		21
+#define PCIMT_IRQ_SCSI		22
+#define PCIMT_IRQ_ETHERNET	23
+#define PCIMT_IRQ_TEMPERATURE	24
+#define PCIMT_IRQ_EISA_NMI	25
+#define PCIMT_IRQ_POWER_OFF	26
+#define PCIMT_IRQ_BUTTON	27
+
+/*
+ * Base address for the mapped 16mb EISA bus segment.
+ */
+#define PCIMT_EISA_BASE		0xb0000000
+
+/* PCI EISA Interrupt acknowledge  */
+#define PCIMT_INT_ACKNOWLEDGE	0xba000000
+
+#endif /* __ASM_SNI_H */
diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
new file mode 100644
index 000000000000..020b4db70ee5
--- /dev/null
+++ b/include/asm-mips/socket.h
@@ -0,0 +1,102 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/*
+ * For setsockopt(2)
+ *
+ * This defines are ABI conformant as far as Linux supports these ...
+ */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001	/* Record debugging information.  */
+#define SO_REUSEADDR	0x0004	/* Allow reuse of local addresses.  */
+#define SO_KEEPALIVE	0x0008	/* Keep connections alive and send
+				   SIGPIPE when they die.  */
+#define SO_DONTROUTE	0x0010	/* Don't do local routing.  */
+#define SO_BROADCAST	0x0020	/* Allow transmission of
+				   broadcast messages.  */
+#define SO_LINGER	0x0080	/* Block on close of a reliable
+				   socket to transmit pending data.  */
+#define SO_OOBINLINE 0x0100	/* Receive out-of-band data in-band.  */
+#if 0
+To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
+#endif
+
+#define SO_TYPE		0x1008	/* Compatible name for SO_STYLE.  */
+#define SO_STYLE	SO_TYPE	/* Synonym */
+#define SO_ERROR	0x1007	/* get error status and clear */
+#define SO_SNDBUF	0x1001	/* Send buffer size. */
+#define SO_RCVBUF	0x1002	/* Receive buffer. */
+#define SO_SNDLOWAT	0x1003	/* send low-water mark */
+#define SO_RCVLOWAT	0x1004	/* receive low-water mark */
+#define SO_SNDTIMEO	0x1005	/* send timeout */
+#define SO_RCVTIMEO 	0x1006	/* receive timeout */
+#define SO_ACCEPTCONN	0x1009
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_BSDCOMPAT	14
+
+#define SO_PASSCRED	17
+#define SO_PEERCRED	18
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		30
+
+#ifdef __KERNEL__
+
+/** sock_type - Socket types
+ *
+ * Please notice that for binary compat reasons MIPS has to
+ * override the enum sock_type in include/linux/net.h, so
+ * we define ARCH_HAS_SOCKET_TYPES here.
+ *
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket 
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ */
+enum sock_type {
+	SOCK_DGRAM	= 1,
+	SOCK_STREAM	= 2,
+	SOCK_RAW	= 3,
+	SOCK_RDM	= 4,
+	SOCK_SEQPACKET	= 5,
+	SOCK_PACKET	= 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+
+#define ARCH_HAS_SOCKET_TYPES 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-mips/sockios.h b/include/asm-mips/sockios.h
new file mode 100644
index 000000000000..87a50bf039ed
--- /dev/null
+++ b/include/asm-mips/sockios.h
@@ -0,0 +1,25 @@
+/*
+ * Socket-level I/O control calls.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906			/* Get stamp - linux-specific */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h
new file mode 100644
index 000000000000..114d3eb98a6a
--- /dev/null
+++ b/include/asm-mips/spinlock.h
@@ -0,0 +1,299 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#include <linux/config.h>
+#include <asm/war.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+
+#define spin_lock_init(x)	do { (x)->lock = 0; } while(0)
+
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_unlock_wait(x)	do { barrier(); } while ((x)->lock)
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_spin_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 li	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (lock->lock), "=&r" (tmp)
+		: "m" (lock->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_spin_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 li	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (lock->lock), "=&r" (tmp)
+		: "m" (lock->lock)
+		: "memory");
+	}
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__(
+	"	.set	noreorder	# _raw_spin_unlock	\n"
+	"	sync						\n"
+	"	sw	$0, %0					\n"
+	"	.set\treorder					\n"
+	: "=m" (lock->lock)
+	: "m" (lock->lock)
+	: "memory");
+}
+
+static inline unsigned int _raw_spin_trylock(spinlock_t *lock)
+{
+	unsigned int temp, res;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_spin_trylock	\n"
+		"1:	ll	%0, %3					\n"
+		"	ori	%2, %0, 1				\n"
+		"	sc	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	 nop						\n"
+		"	andi	%2, %0, 1				\n"
+		"	sync						\n"
+		"	.set	reorder"
+		: "=&r" (temp), "=m" (lock->lock), "=&r" (res)
+		: "m" (lock->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_spin_trylock	\n"
+		"1:	ll	%0, %3					\n"
+		"	ori	%2, %0, 1				\n"
+		"	sc	%2, %1					\n"
+		"	beqz	%2, 1b					\n"
+		"	 andi	%2, %0, 1				\n"
+		"	sync						\n"
+		"	.set	reorder"
+		: "=&r" (temp), "=m" (lock->lock), "=&r" (res)
+		: "m" (lock->lock)
+		: "memory");
+	}
+
+	return res == 0;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+
+#define rwlock_init(x)  do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 1b					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 1b					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+}
+
+/* Note the use of sub, not subu which will make the kernel die with an
+   overflow exception if we ever try to unlock an rwlock that is already
+   unlocked or is being held by a writer.  */
+static inline void _raw_read_unlock(rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# _raw_read_unlock	\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	sync						\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_read_unlock	\n"
+		"1:	ll	%1, %2					\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+}
+
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 nop						\n"
+		"	sync						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+}
+
+static inline void _raw_write_unlock(rwlock_t *rw)
+{
+	__asm__ __volatile__(
+	"	sync			# _raw_write_unlock	\n"
+	"	sw	$0, %0					\n"
+	: "=m" (rw->lock)
+	: "m" (rw->lock)
+	: "memory");
+}
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+static inline int _raw_write_trylock(rwlock_t *rw)
+{
+	unsigned int tmp;
+	int ret;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	sync						\n"
+		"	li	%2, 1					\n"
+		"	.set	reorder					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# _raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 sync						\n"
+		"	li	%2, 1					\n"
+		"	.set	reorder					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	return ret;
+}
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
new file mode 100644
index 000000000000..86283c25fd5b
--- /dev/null
+++ b/include/asm-mips/stackframe.h
@@ -0,0 +1,346 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_STACKFRAME_H
+#define _ASM_STACKFRAME_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/offset.h>
+
+		.macro	SAVE_AT
+		.set	push
+		.set	noat
+		LONG_S	$1, PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	SAVE_TEMP
+		mfhi	v1
+#ifdef CONFIG_MIPS32
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	v1, PT_HI(sp)
+		mflo	v1
+		LONG_S	$10, PT_R10(sp)
+		LONG_S	$11, PT_R11(sp)
+		LONG_S	v1,  PT_LO(sp)
+		LONG_S	$12, PT_R12(sp)
+		LONG_S	$13, PT_R13(sp)
+		LONG_S	$14, PT_R14(sp)
+		LONG_S	$15, PT_R15(sp)
+		LONG_S	$24, PT_R24(sp)
+		.endm
+
+		.macro	SAVE_STATIC
+		LONG_S	$16, PT_R16(sp)
+		LONG_S	$17, PT_R17(sp)
+		LONG_S	$18, PT_R18(sp)
+		LONG_S	$19, PT_R19(sp)
+		LONG_S	$20, PT_R20(sp)
+		LONG_S	$21, PT_R21(sp)
+		LONG_S	$22, PT_R22(sp)
+		LONG_S	$23, PT_R23(sp)
+		LONG_S	$30, PT_R30(sp)
+		.endm
+
+#ifdef CONFIG_SMP
+		.macro	get_saved_sp	/* SMP variation */
+#ifdef CONFIG_MIPS32
+		mfc0	k0, CP0_CONTEXT
+		lui	k1, %hi(kernelsp)
+		srl	k0, k0, 23
+		sll	k0, k0, 2
+		addu	k1, k0
+		LONG_L	k1, %lo(kernelsp)(k1)
+#endif
+#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+		MFC0	k1, CP0_CONTEXT
+		dsra	k1, 23
+		lui	k0, %hi(pgd_current)
+		addiu	k0, %lo(pgd_current)
+		dsubu	k1, k0
+		lui	k0, %hi(kernelsp)
+		daddu	k1, k0
+		LONG_L	k1, %lo(kernelsp)(k1)
+#endif
+#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+		MFC0	k1, CP0_CONTEXT
+		dsrl	k1, 23
+		dsll	k1, k1, 3
+		LONG_L	k1, kernelsp(k1)
+#endif
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+#ifdef CONFIG_MIPS32
+		mfc0	\temp, CP0_CONTEXT
+		srl	\temp, 23
+		sll	\temp, 2
+		LONG_S	\stackp, kernelsp(\temp)
+#endif
+#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+		lw	\temp, TI_CPU(gp)
+		dsll	\temp, 3
+		lui	\temp2, %hi(kernelsp)
+		daddu	\temp, \temp2
+		LONG_S	\stackp, %lo(kernelsp)(\temp)
+#endif
+#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+		lw	\temp, TI_CPU(gp)
+		dsll	\temp, 3
+		LONG_S	\stackp, kernelsp(\temp)
+#endif
+		.endm
+#else
+		.macro	get_saved_sp	/* Uniprocessor variation */
+		lui	k1, %hi(kernelsp)
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+		LONG_S	\stackp, kernelsp
+		.endm
+#endif
+
+		.macro	SAVE_SOME
+		.set	push
+		.set	noat
+		.set	reorder
+		mfc0	k0, CP0_STATUS
+		sll	k0, 3		/* extract cu0 bit */
+		.set	noreorder
+		bltz	k0, 8f
+		 move	k1, sp
+		.set	reorder
+		/* Called from user mode, new stack. */
+		get_saved_sp
+8:		move	k0, sp
+		PTR_SUBU sp, k1, PT_SIZE
+		LONG_S	k0, PT_R29(sp)
+		LONG_S	$3, PT_R3(sp)
+		LONG_S	$0, PT_R0(sp)
+		mfc0	v1, CP0_STATUS
+		LONG_S	$2, PT_R2(sp)
+		LONG_S	v1, PT_STATUS(sp)
+		LONG_S	$4, PT_R4(sp)
+		mfc0	v1, CP0_CAUSE
+		LONG_S	$5, PT_R5(sp)
+		LONG_S	v1, PT_CAUSE(sp)
+		LONG_S	$6, PT_R6(sp)
+		MFC0	v1, CP0_EPC
+		LONG_S	$7, PT_R7(sp)
+#ifdef CONFIG_MIPS64
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	v1, PT_EPC(sp)
+		LONG_S	$25, PT_R25(sp)
+		LONG_S	$28, PT_R28(sp)
+		LONG_S	$31, PT_R31(sp)
+		ori	$28, sp, _THREAD_MASK
+		xori	$28, _THREAD_MASK
+		.set	pop
+		.endm
+
+		.macro	SAVE_ALL
+		SAVE_SOME
+		SAVE_AT
+		SAVE_TEMP
+		SAVE_STATIC
+		.endm
+
+		.macro	RESTORE_AT
+		.set	push
+		.set	noat
+		LONG_L	$1,  PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_TEMP
+		LONG_L	$24, PT_LO(sp)
+#ifdef CONFIG_MIPS32
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		mtlo	$24
+		LONG_L	$24, PT_HI(sp)
+		LONG_L	$10, PT_R10(sp)
+		LONG_L	$11, PT_R11(sp)
+		mthi	$24
+		LONG_L	$12, PT_R12(sp)
+		LONG_L	$13, PT_R13(sp)
+		LONG_L	$14, PT_R14(sp)
+		LONG_L	$15, PT_R15(sp)
+		LONG_L	$24, PT_R24(sp)
+		.endm
+
+		.macro	RESTORE_STATIC
+		LONG_L	$16, PT_R16(sp)
+		LONG_L	$17, PT_R17(sp)
+		LONG_L	$18, PT_R18(sp)
+		LONG_L	$19, PT_R19(sp)
+		LONG_L	$20, PT_R20(sp)
+		LONG_L	$21, PT_R21(sp)
+		LONG_L	$22, PT_R22(sp)
+		LONG_L	$23, PT_R23(sp)
+		LONG_L	$30, PT_R30(sp)
+		.endm
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+		mfc0	a0, CP0_STATUS
+		ori	a0, 0x1f
+		xori	a0, 0x1f
+		mtc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+#ifdef CONFIG_MIPS64
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		.set	push
+		.set	noreorder
+		LONG_L	k0, PT_EPC(sp)
+		LONG_L	sp, PT_R29(sp)
+		jr	k0
+		 rfe
+		.set	pop
+		.endm
+
+#else
+
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+		mfc0	a0, CP0_STATUS
+		ori	a0, 0x1f
+		xori	a0, 0x1f
+		mtc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+		LONG_L	v1, PT_EPC(sp)
+		MTC0	v1, CP0_EPC
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+#ifdef CONFIG_MIPS64
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		LONG_L	sp, PT_R29(sp)
+		.set	mips3
+		eret
+		.set	mips0
+		.endm
+
+#endif
+
+		.macro	RESTORE_SP
+		LONG_L	sp, PT_R29(sp)
+		.endm
+
+		.macro	RESTORE_ALL
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP
+		.endm
+
+		.macro	RESTORE_ALL_AND_RET
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP_AND_RET
+		.endm
+
+/*
+ * Move to kernel mode and disable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	CLI
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | 0x1f
+		or	t0, t1
+		xori	t0, 0x1f
+		mtc0	t0, CP0_STATUS
+		irq_disable_hazard
+		.endm
+
+/*
+ * Move to kernel mode and enable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	STI
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | 0x1f
+		or	t0, t1
+		xori	t0, 0x1e
+		mtc0	t0, CP0_STATUS
+		irq_enable_hazard
+		.endm
+
+/*
+ * Just move to kernel mode and leave interrupts as they are.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	KMODE
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | 0x1e
+		or	t0, t1
+		xori	t0, 0x1e
+		mtc0	t0, CP0_STATUS
+		irq_disable_hazard
+		.endm
+
+#endif /* _ASM_STACKFRAME_H */
diff --git a/include/asm-mips/stat.h b/include/asm-mips/stat.h
new file mode 100644
index 000000000000..6e00f751ab6d
--- /dev/null
+++ b/include/asm-mips/stat.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+#include <linux/types.h>
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+struct stat {
+	unsigned	st_dev;
+	long		st_pad1[3];		/* Reserved for network id */
+	ino_t		st_ino;
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned 	st_rdev;
+	long		st_pad2[2];
+	off_t		st_size;
+	long		st_pad3;
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	long		st_atime_nsec;
+	time_t		st_mtime;
+	long		st_mtime_nsec;
+	time_t		st_ctime;
+	long		st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	long		st_pad4[14];
+};
+
+/*
+ * This matches struct stat64 in glibc2.1, hence the absolutely insane
+ * amounts of padding around dev_t's.  The memory layout is the same as of
+ * struct stat of the 64-bit kernel.
+ */
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_pad0[3];	/* Reserved for st_dev expansion  */
+
+	unsigned long long	st_ino;
+
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+
+	uid_t		st_uid;
+	gid_t		st_gid;
+
+	unsigned long	st_rdev;
+	unsigned long	st_pad1[3];	/* Reserved for st_rdev expansion  */
+
+	long long	st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	unsigned long	st_atime_nsec;	/* Reserved for st_atime expansion  */
+
+	time_t		st_mtime;
+	unsigned long	st_mtime_nsec;	/* Reserved for st_mtime expansion  */
+
+	time_t		st_ctime;
+	unsigned long	st_ctime_nsec;	/* Reserved for st_ctime expansion  */
+
+	unsigned long	st_blksize;
+	unsigned long	st_pad2;
+
+	long long	st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/* The memory layout is the same as of struct stat64 of the 32-bit kernel.  */
+struct stat {
+	unsigned int		st_dev;
+	unsigned int		st_pad0[3]; /* Reserved for st_dev expansion */
+
+	unsigned long		st_ino;
+
+	mode_t			st_mode;
+	nlink_t			st_nlink;
+
+	uid_t			st_uid;
+	gid_t			st_gid;
+
+	unsigned int		st_rdev;
+	unsigned int		st_pad1[3]; /* Reserved for st_rdev expansion */
+
+	off_t			st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	unsigned int		st_atime;
+	unsigned int		st_atime_nsec;
+
+	unsigned int		st_mtime;
+	unsigned int		st_mtime_nsec;
+
+	unsigned int		st_ctime;
+	unsigned int		st_ctime_nsec;
+
+	unsigned int		st_blksize;
+	unsigned int		st_pad2;
+
+	unsigned long		st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/include/asm-mips/statfs.h b/include/asm-mips/statfs.h
new file mode 100644
index 000000000000..5076fec65780
--- /dev/null
+++ b/include/asm-mips/statfs.h
@@ -0,0 +1,96 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <linux/posix_types.h>
+#include <asm/sgidefs.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t        fsid_t;
+
+#endif
+
+struct statfs {
+	long		f_type;
+#define f_fstyp f_type
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+/*
+ * Unlike the traditional version the LFAPI version has none of the ABI junk
+ */
+struct statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+ 
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+struct statfs64 {			/* Same as struct statfs */
+	long		f_type;
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+struct compat_statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#endif /* _ASM_STATFS_H */
diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h
new file mode 100644
index 000000000000..b18345504f8a
--- /dev/null
+++ b/include/asm-mips/string.h
@@ -0,0 +1,166 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle
+ * Copyright (c) 2000 by Silicon Graphics, Inc.
+ * Copyright (c) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#include <linux/config.h>
+
+/*
+ * Most of the inline functions are rather naive implementations so I just
+ * didn't bother updating them for 64-bit ...
+ */
+#ifdef CONFIG_MIPS32
+
+#ifndef IN_STRING_C
+
+#define __HAVE_ARCH_STRCPY
+static __inline__ char *strcpy(char *__dest, __const__ char *__src)
+{
+  char *__xdest = __dest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%1,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"bnez\t$1,1b\n\t"
+	"addiu\t%0,1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__dest), "=r" (__src)
+        : "0" (__dest), "1" (__src)
+	: "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n)
+{
+  char *__xdest = __dest;
+
+  if (__n == 0)
+    return __xdest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"beqz\t$1,2f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+        : "=r" (__dest), "=r" (__src), "=r" (__n)
+        : "0" (__dest), "1" (__src), "2" (__n)
+        : "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct)
+{
+  int __res;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n\t"
+	"lbu\t%2,(%0)\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%0,1\n\t"
+	"bne\t$1,%2,2f\n\t"
+	"addiu\t%1,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"lbu\t%2,(%0)\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%2,$1\n"
+	"2:\tsubu\t%2,$1\n"
+	"3:\t.set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__res)
+	: "0" (__cs), "1" (__ct));
+
+  return __res;
+}
+
+#endif /* !defined(IN_STRING_C) */
+
+#define __HAVE_ARCH_STRNCMP
+static __inline__ int
+strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count)
+{
+	int __res;
+
+	__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t%3,(%0)\n\t"
+	"beqz\t%2,2f\n\t"
+	"lbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"bne\t$1,%3,3f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%3,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%3,$1\n"
+	"3:\tsubu\t%3,$1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res)
+	: "0" (__cs), "1" (__ct), "2" (__count));
+
+	return __res;
+}
+#endif /* CONFIG_MIPS32 */
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#ifdef CONFIG_MIPS32
+#define __HAVE_ARCH_MEMSCAN
+static __inline__ void *memscan(void *__addr, int __c, size_t __size)
+{
+	char *__end = (char *)__addr + __size;
+	unsigned char __uc = (unsigned char) __c;
+
+	__asm__(".set\tpush\n\t"
+		".set\tnoat\n\t"
+		".set\treorder\n\t"
+		"1:\tbeq\t%0,%1,2f\n\t"
+		"addiu\t%0,1\n\t"
+		"lbu\t$1,-1(%0)\n\t"
+		"bne\t$1,%z4,1b\n"
+		"2:\t.set\tpop"
+		: "=r" (__addr), "=r" (__end)
+		: "0" (__addr), "1" (__end), "Jr" (__uc));
+
+	return __addr;
+}
+#endif /* CONFIG_MIPS32 */
+
+#endif /* _ASM_STRING_H */
diff --git a/include/asm-mips/suspend.h b/include/asm-mips/suspend.h
new file mode 100644
index 000000000000..2562f8f9be0e
--- /dev/null
+++ b/include/asm-mips/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SUSPEND_H
+#define __ASM_SUSPEND_H
+
+/* Somewhen...  Maybe :-)  */
+
+#endif /* __ASM_SUSPEND_H */
diff --git a/include/asm-mips/sysmips.h b/include/asm-mips/sysmips.h
new file mode 100644
index 000000000000..4f47b7d6a5f7
--- /dev/null
+++ b/include/asm-mips/sysmips.h
@@ -0,0 +1,25 @@
+/*
+ * Definitions for the MIPS sysmips(2) call
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SYSMIPS_H
+#define _ASM_SYSMIPS_H
+
+/*
+ * Commands for the sysmips(2) call
+ *
+ * sysmips(2) is deprecated - though some existing software uses it.
+ * We only support the following commands.
+ */
+#define SETNAME                    1	/* set hostname                  */
+#define FLUSH_CACHE		   3	/* writeback and invalidate caches */
+#define MIPS_FIXADE                7	/* control address error fixing  */
+#define MIPS_RDNVRAM              10	/* read NVRAM */
+#define MIPS_ATOMIC_SET		2001	/* atomically set variable       */
+
+#endif /* _ASM_SYSMIPS_H */
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
new file mode 100644
index 000000000000..888fd8908467
--- /dev/null
+++ b/include/asm-mips/system.h
@@ -0,0 +1,438 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/cpu-features.h>
+#include <asm/ptrace.h>
+#include <asm/war.h>
+#include <asm/interrupt.h>
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like thiswhere there are no data dependencies.
+ */
+
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_CPU_HAS_SYNC
+#define __sync()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		".set	mips2\n\t"		\
+		"sync\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: /* no input */		\
+		: "memory")
+#else
+#define __sync()	do { } while(0)
+#endif
+
+#define __fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"nop\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1)		\
+		: "memory")
+
+#define fast_wmb()	__sync()
+#define fast_rmb()	__sync()
+#define fast_mb()	__sync()
+#define fast_iob()				\
+	do {					\
+		__sync();			\
+		__fast_iob();			\
+	} while (0)
+
+#ifdef CONFIG_CPU_HAS_WB
+
+#include <asm/wbflush.h>
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		wbflush()
+#define iob()		wbflush()
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		fast_mb()
+#define iob()		fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#define set_wmb(var, value) \
+do { var = value; wmb(); } while (0)
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ */
+extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+
+struct task_struct;
+
+#define switch_to(prev,next,last) \
+do { \
+	(last) = resume(prev, next, next->thread_info); \
+} while(0)
+
+#define ROT_IN_PIECES							\
+	"	.set	noreorder	\n"				\
+	"	.set	reorder		\n"
+
+static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
+{
+	__u32 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	move	%2, %z4					\n"
+		"	sc	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		ROT_IN_PIECES
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	move	%2, %z4					\n"
+		"	sc	%2, %1					\n"
+		"	beqz	%2, 1b					\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	return retval;
+}
+
+#ifdef CONFIG_MIPS64
+static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
+{
+	__u64 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		ROT_IN_PIECES
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqz	%2, 1b					\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	return retval;
+}
+#else
+extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val);
+#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+		case 4:
+			return __xchg_u32(ptr, x);
+		case 8:
+			return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
+	unsigned long new)
+{
+	__u32 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noat					\n"
+		"1:	ll	%0, %2			# __cmpxchg_u32	\n"
+		"	bne	%0, %z3, 2f				\n"
+		"	move	$1, %z4					\n"
+		"	sc	$1, %1					\n"
+		"	beqzl	$1, 1b					\n"
+		ROT_IN_PIECES
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"2:							\n"
+		"	.set	at					\n"
+		: "=&r" (retval), "=m" (*m)
+		: "R" (*m), "Jr" (old), "Jr" (new)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	noat					\n"
+		"1:	ll	%0, %2			# __cmpxchg_u32	\n"
+		"	bne	%0, %z3, 2f				\n"
+		"	move	$1, %z4					\n"
+		"	sc	$1, %1					\n"
+		"	beqz	$1, 1b					\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"2:							\n"
+		"	.set	at					\n"
+		: "=&r" (retval), "=m" (*m)
+		: "R" (*m), "Jr" (old), "Jr" (new)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		retval = *m;
+		if (retval == old)
+			*m = new;
+		local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	return retval;
+}
+
+#ifdef CONFIG_MIPS64
+static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
+	unsigned long new)
+{
+	__u64 retval;
+
+	if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	noat					\n"
+		"1:	lld	%0, %2			# __cmpxchg_u64	\n"
+		"	bne	%0, %z3, 2f				\n"
+		"	move	$1, %z4					\n"
+		"	scd	$1, %1					\n"
+		"	beqzl	$1, 1b					\n"
+		ROT_IN_PIECES
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"2:							\n"
+		"	.set	at					\n"
+		: "=&r" (retval), "=m" (*m)
+		: "R" (*m), "Jr" (old), "Jr" (new)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	noat					\n"
+		"1:	lld	%0, %2			# __cmpxchg_u64	\n"
+		"	bne	%0, %z3, 2f				\n"
+		"	move	$1, %z4					\n"
+		"	scd	$1, %1					\n"
+		"	beqz	$1, 1b					\n"
+#ifdef CONFIG_SMP
+		"	sync						\n"
+#endif
+		"2:							\n"
+		"	.set	at					\n"
+		: "=&r" (retval), "=m" (*m)
+		: "R" (*m), "Jr" (old), "Jr" (new)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		retval = *m;
+		if (retval == old)
+			*m = new;
+		local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	return retval;
+}
+#else
+extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
+	volatile int * m, unsigned long old, unsigned long new);
+#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+	unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,old,new) ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr))))
+
+extern void *set_except_vector(int n, void *addr);
+extern void per_cpu_trap_init(void);
+
+extern NORET_TYPE void __die(const char *, struct pt_regs *, const char *file,
+	const char *func, unsigned long line);
+extern void __die_if_kernel(const char *, struct pt_regs *, const char *file,
+	const char *func, unsigned long line);
+
+#define die(msg, regs)							\
+	__die(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
+#define die_if_kernel(msg, regs)					\
+	__die_if_kernel(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
+
+extern int stop_a_enabled;
+
+/*
+ * Taken from include/asm-ia64/system.h; prevents deadlock on SMP
+ * systems.
+ */
+#define prepare_arch_switch(rq, next)		\
+do {						\
+	spin_lock(&(next)->switch_lock);	\
+	spin_unlock(&(rq)->lock);		\
+} while (0)
+#define finish_arch_switch(rq, prev)	spin_unlock_irq(&(prev)->switch_lock)
+#define task_running(rq, p) 		((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h
new file mode 100644
index 000000000000..c29c65b7818e
--- /dev/null
+++ b/include/asm-mips/termbits.h
@@ -0,0 +1,207 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long speed_t;
+typedef unsigned long tcflag_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef __u32 speed_t;
+typedef __u32 tcflag_t;
+#endif
+
+/*
+ * The ABI says nothing about NCC but seems to use NCCS as
+ * replacement for it in struct termio
+ */
+#define NCCS	23
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VQUIT		 1		/* Quit character [ISIG].  */
+#define VERASE		 2		/* Erase character [ICANON].  */
+#define VKILL		 3		/* Kill-line character [ICANON].  */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
+#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VSWTC		 7		/* ??? */
+#define VSWTCH		VSWTC
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
+#define VSUSP		10		/* Suspend character [ISIG].  */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#endif
+#define VREPRINT	12		/* Reprint-line character [ICANON].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VWERASE		14		/* Word-erase character [ICANON].  */
+#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
+#define VEOF		16		/* End-of-file character [ICANON].  */
+#define VEOL		17		/* End-of-line character [ICANON].  */
+
+/* c_iflag bits */
+#define IGNBRK	0000001		/* Ignore break condition.  */
+#define BRKINT	0000002		/* Signal interrupt on break.  */
+#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
+#define PARMRK	0000010		/* Mark parity and framing errors.  */
+#define INPCK	0000020		/* Enable input parity check.  */
+#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
+#define INLCR	0000100		/* Map NL to CR on input.  */
+#define IGNCR	0000200		/* Ignore CR.  */
+#define ICRNL	0000400		/* Map CR to NL on input.  */
+#define IUCLC	0001000		/* Map upper case to lower case on input.  */
+#define IXON	0002000		/* Enable start/stop output control.  */
+#define IXANY	0004000		/* Any character will restart after stop.  */
+#define IXOFF	0010000		/* Enable start/stop input control.  */
+#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#define IUTF8	0040000		/* Input is UTF8 */
+
+/* c_oflag bits */
+#define OPOST	0000001		/* Perform output processing.  */
+#define OLCUC	0000002		/* Map lower case to upper case on output.  */
+#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+/*
+#define PAGEOUT ???
+#define WRAP    ???
+ */
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060		/* Number of bits per byte (mask).  */
+#define   CS5	0000000		/* 5 bits per byte.  */
+#define   CS6	0000020		/* 6 bits per byte.  */
+#define   CS7	0000040		/* 7 bits per byte.  */
+#define   CS8	0000060		/* 8 bits per byte.  */
+#define CSTOPB	0000100		/* Two stop bits instead of one.  */
+#define CREAD	0000200		/* Enable receiver.  */
+#define PARENB	0000400		/* Parity enable.  */
+#define PARODD	0001000		/* Odd parity instead of even.  */
+#define HUPCL	0002000		/* Hang up on last close.  */
+#define CLOCAL	0004000		/* Ignore modem status lines.  */
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR    010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001		/* Enable signals.  */
+#define ICANON	0000002		/* Do erase and kill processing.  */
+#define XCASE	0000004
+#define ECHO	0000010		/* Enable echo.  */
+#define ECHOE	0000020		/* Visual erase for ERASE.  */
+#define ECHOK	0000040		/* Echo NL after KILL.  */
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define NOFLSH	0000200		/* Disable flush after interrupt.  */
+#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
+#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOKE	0004000		/* Visual erase for KILL.  */
+#define FLUSHO	0020000
+#define PENDIN	0040000		/* Retype pending input (state).  */
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
+#define ITOSTOP	TOSTOP
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0	/* Suspend output.  */
+#define	TCOON		1	/* Restart suspended output.  */
+#define	TCIOFF		2	/* Send a STOP character.  */
+#define	TCION		3	/* Send a START character.  */
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define	TCIOFLUSH	2	/* Discard all pending data.  */
+
+/* tcsetattr uses these */
+#define	TCSANOW		TCSETS	/* Change immediately.  */
+#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
+#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/include/asm-mips/termios.h b/include/asm-mips/termios.h
new file mode 100644
index 000000000000..4906204d34fe
--- /dev/null
+++ b/include/asm-mips/termios.h
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	int	sg_flags;	/* SGI special - int, not short */
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+        char    t_suspc;        /* stop process signal */
+        char    t_dsuspc;       /* delayed stop process signal */
+        char    t_rprntc;       /* reprint line */
+        char    t_flushc;       /* flush output (toggles) */
+        char    t_werasc;       /* word erase */
+        char    t_lnextc;       /* literal next character */
+};
+
+/* TIOCGSIZE, TIOCSSIZE not defined yet.  Only needed for SunOS source
+   compatibility anyway ... */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC	8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	char c_line;			/* line discipline */
+	unsigned char c_cc[NCCS];	/* control characters */
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ *	intr=^C		quit=^\		erase=del	kill=^U
+ *	vmin=\1		vtime=\0	eol2=\0		swtc=\0
+ *	start=^Q	stop=^S		susp=^Z		vdsusp=
+ *	reprint=^R	discard=^U	werase=^W	lnext=^V
+ *	eof=^D		eol=\0
+ */
+#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001		/* line enable */
+#define TIOCM_DTR	0x002		/* data terminal ready */
+#define TIOCM_RTS	0x004		/* request to send */
+#define TIOCM_ST	0x010		/* secondary transmit */
+#define TIOCM_SR	0x020		/* secondary receive */
+#define TIOCM_CTS	0x040		/* clear to send */
+#define TIOCM_CAR	0x100		/* carrier detect */
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RNG	0x200		/* ring */
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_DSR	0x400		/* data set ready */
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6		/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved fo Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15	/* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line, &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
new file mode 100644
index 000000000000..768900305e2f
--- /dev/null
+++ b/include/asm-mips/thread_info.h
@@ -0,0 +1,137 @@
+/* thread_info.h: MIPS low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$28");
+#define current_thread_info()  __current_thread_info
+
+/* thread information allocation */
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS32)
+#define THREAD_SIZE_ORDER (1)
+#endif
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS64)
+#define THREAD_SIZE_ORDER (2)
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define THREAD_SIZE_ORDER (1)
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK (THREAD_SIZE - 1UL)
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = kmalloc(THREAD_SIZE, GFP_KERNEL);			\
+	if (ret)						\
+		memset(ret, 0, THREAD_SIZE);			\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_SYSCALL_TRACE	31	/* syscall trace active */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000ffef	/* work to do on
+                                                   interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x8000ffff	/* work to do on any return to
+                                                   u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
new file mode 100644
index 000000000000..e22a20665871
--- /dev/null
+++ b/include/asm-mips/time.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2001, 2002, MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (c) 2003  Maciej W. Rozycki
+ *
+ * include/asm-mips/time.h
+ *     header file for the new style time.c file and time services.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Please refer to Documentation/mips/time.README.
+ */
+#ifndef _ASM_TIME_H
+#define _ASM_TIME_H
+
+#include <linux/interrupt.h>
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+#include <linux/rtc.h>
+
+/*
+ * RTC ops.  By default, they point to no-RTC functions.
+ *	rtc_get_time - mktime(year, mon, day, hour, min, sec) in seconds.
+ *	rtc_set_time - reverse the above translation and set time to RTC.
+ *	rtc_set_mmss - similar to rtc_set_time, but only min and sec need
+ *			to be set.  Used by RTC sync-up.
+ */
+extern unsigned long (*rtc_get_time)(void);
+extern int (*rtc_set_time)(unsigned long);
+extern int (*rtc_set_mmss)(unsigned long);
+
+/*
+ * Timer interrupt functions.
+ * mips_timer_state is needed for high precision timer calibration.
+ * mips_timer_ack may be NULL if the interrupt is self-recoverable.
+ */
+extern int (*mips_timer_state)(void);
+extern void (*mips_timer_ack)(void);
+
+/*
+ * High precision timer functions.
+ * If mips_hpt_read is NULL, an R4k-compatible timer setup is attempted.
+ */
+extern unsigned int (*mips_hpt_read)(void);
+extern void (*mips_hpt_init)(unsigned int);
+
+/*
+ * to_tm() converts system time back to (year, mon, day, hour, min, sec).
+ * It is intended to help implement rtc_set_time() functions.
+ * Copied from PPC implementation.
+ */
+extern void to_tm(unsigned long tim, struct rtc_time *tm);
+
+/*
+ * do_gettimeoffset(). By default, this func pointer points to
+ * do_null_gettimeoffset(), which leads to the same resolution as HZ.
+ * Higher resolution versions are available, which give ~1us resolution.
+ */
+extern unsigned long (*do_gettimeoffset)(void);
+
+/*
+ * high-level timer interrupt routines.
+ */
+extern irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/*
+ * the corresponding low-level timer interrupt routine.
+ */
+extern asmlinkage void ll_timer_interrupt(int irq, struct pt_regs *regs);
+
+/*
+ * profiling and process accouting is done separately in local_timer_interrupt
+ */
+extern void local_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+
+/*
+ * board specific routines required by time_init().
+ * board_time_init is defaulted to NULL and can remain so.
+ * board_timer_setup must be setup properly in machine setup routine.
+ */
+struct irqaction;
+extern void (*board_time_init)(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+
+/*
+ * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
+ * counter as a timer interrupt source; otherwise it can be set up
+ * automagically with an aid of mips_timer_state.
+ */
+extern unsigned int mips_hpt_frequency;
+
+#endif /* _ASM_TIME_H */
diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h
new file mode 100644
index 000000000000..98aa737b34aa
--- /dev/null
+++ b/include/asm-mips/timex.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * This is the frequency of the timer used for Linux's timer interrupt.
+ * The value should be defined as accurate as possible or under certain
+ * circumstances Linux timekeeping might become inaccurate or fail.
+ *
+ * For many system the exact clockrate of the timer isn't known but due to
+ * the way this value is used we can get away with a wrong value as long
+ * as this value is:
+ *
+ *  - a multiple of HZ
+ *  - a divisor of the actual rate
+ *
+ * 500000 is a good such cheat value.
+ *
+ * The obscure number 1193182 is the same as used by the original i8254
+ * time in legacy PC hardware; the chip unfortunately also found in a
+ * bunch of MIPS systems.  The last remaining user of the i8254 for the
+ * timer interrupt is the RM200; it's a very standard system so there is
+ * no reason to make this a separate architecture.
+ */
+
+#include <timex.h>
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity.
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ *
+ * We know that all SMP capable CPUs have cycle counters.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return read_c0_count();
+}
+
+#endif /*  _ASM_TIMEX_H */
diff --git a/include/asm-mips/titan_dep.h b/include/asm-mips/titan_dep.h
new file mode 100644
index 000000000000..fd9599e40a0a
--- /dev/null
+++ b/include/asm-mips/titan_dep.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Board specific definititions for the PMC-Sierra Yosemite
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __TITAN_DEP_H__
+#define __TITAN_DEP_H__
+
+#include <asm/addrspace.h>              /* for KSEG1ADDR() */
+#include <asm/byteorder.h>              /* for cpu_to_le32() */
+
+#define TITAN_READ(ofs)							\
+	(*(volatile u32 *)(ocd_base+(ofs)))
+#define TITAN_READ_16(ofs)						\
+	(*(volatile u16 *)(ocd_base+(ofs)))
+#define TITAN_READ_8(ofs)						\
+	(*(volatile u8 *)(ocd_base+(ofs)))
+
+#define TITAN_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_16(ofs, data)					\
+	do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_8(ofs, data)					\
+	do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0)
+
+/*
+ * PCI specific defines
+ */
+#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
+#define	TITAN_PCI_0_CONFIG_DATA		0x784
+
+/*
+ * HT specific defines
+ */
+#define RM9000x2_HTLINK_REG		0xbb000644
+#define RM9000x2_BASE_ADDR		0xbb000000
+
+#define OCD_BASE			0xfb000000UL
+#define OCD_SIZE			0x3000UL
+
+extern unsigned long ocd_base;
+
+/*
+ * OCD Registers
+ */
+#define RM9000x2_OCD_LKB5		0x0128		/* Ethernet */
+#define RM9000x2_OCD_LKM5		0x012c
+
+#define RM9000x2_OCD_LKB7		0x0138		/* HT Region 0 */
+#define RM9000x2_OCD_LKM7		0x013c
+#define RM9000x2_OCD_LKB8		0x0140		/* HT Region 1 */
+#define RM9000x2_OCD_LKM8		0x0144
+
+#define RM9000x2_OCD_LKB9		0x0148		/* Local Bus */
+#define RM9000x2_OCD_LKM9		0x014c
+#define RM9000x2_OCD_LKB10		0x0150
+#define RM9000x2_OCD_LKM10		0x0154
+#define RM9000x2_OCD_LKB11		0x0158
+#define RM9000x2_OCD_LKM11		0x015c
+#define RM9000x2_OCD_LKB12		0x0160
+#define RM9000x2_OCD_LKM12		0x0164
+
+#define RM9000x2_OCD_LKB13		0x0168		/* Scratch RAM */
+#define RM9000x2_OCD_LKM13		0x016c
+
+#define RM9000x2_OCD_LPD0		0x0200		/* Local Bus */
+#define RM9000x2_OCD_LPD1		0x0210
+#define RM9000x2_OCD_LPD2		0x0220
+#define RM9000x2_OCD_LPD3		0x0230
+
+#define RM9000x2_OCD_HTDVID		0x0600	/* HT Device Header */
+#define RM9000x2_OCD_HTSC		0x0604
+#define RM9000x2_OCD_HTCCR		0x0608
+#define RM9000x2_OCD_HTBHL		0x060c
+#define RM9000x2_OCD_HTBAR0		0x0610
+#define RM9000x2_OCD_HTBAR1		0x0614
+#define RM9000x2_OCD_HTBAR2		0x0618
+#define RM9000x2_OCD_HTBAR3		0x061c
+#define RM9000x2_OCD_HTBAR4		0x0620
+#define RM9000x2_OCD_HTBAR5		0x0624
+#define RM9000x2_OCD_HTCBCPT		0x0628
+#define RM9000x2_OCD_HTSDVID		0x062c
+#define RM9000x2_OCD_HTXRA		0x0630
+#define RM9000x2_OCD_HTCAP1		0x0634
+#define RM9000x2_OCD_HTIL		0x063c
+
+#define RM9000x2_OCD_HTLCC		0x0640	/* HT Capability Block */
+#define RM9000x2_OCD_HTLINK		0x0644
+#define RM9000x2_OCD_HTFQREV		0x0648
+
+#define RM9000x2_OCD_HTERCTL		0x0668	/* HT Controller */
+#define RM9000x2_OCD_HTRXDB		0x066c
+#define RM9000x2_OCD_HTIMPED		0x0670
+#define RM9000x2_OCD_HTSWIMP		0x0674
+#define RM9000x2_OCD_HTCAL		0x0678
+
+#define RM9000x2_OCD_HTBAA30		0x0680
+#define RM9000x2_OCD_HTBAA54		0x0684
+#define RM9000x2_OCD_HTMASK0		0x0688
+#define RM9000x2_OCD_HTMASK1		0x068c
+#define RM9000x2_OCD_HTMASK2		0x0690
+#define RM9000x2_OCD_HTMASK3		0x0694
+#define RM9000x2_OCD_HTMASK4		0x0698
+#define RM9000x2_OCD_HTMASK5		0x069c
+
+#define RM9000x2_OCD_HTIFCTL		0x06a0
+#define RM9000x2_OCD_HTPLL		0x06a4
+
+#define RM9000x2_OCD_HTSRI		0x06b0
+#define RM9000x2_OCD_HTRXNUM		0x06b4
+#define RM9000x2_OCD_HTTXNUM		0x06b8
+
+#define RM9000x2_OCD_HTTXCNT		0x06c8
+
+#define RM9000x2_OCD_HTERROR		0x06d8
+#define RM9000x2_OCD_HTRCRCE		0x06dc
+#define RM9000x2_OCD_HTEOI		0x06e0
+
+#define RM9000x2_OCD_CRCR		0x06f0
+
+#define RM9000x2_OCD_HTCFGA		0x06f8
+#define RM9000x2_OCD_HTCFGD		0x06fc
+
+#define RM9000x2_OCD_INTMSG		0x0a00
+
+#define RM9000x2_OCD_INTPIN0		0x0a40
+#define RM9000x2_OCD_INTPIN1		0x0a44
+#define RM9000x2_OCD_INTPIN2		0x0a48
+#define RM9000x2_OCD_INTPIN3		0x0a4c
+#define RM9000x2_OCD_INTPIN4		0x0a50
+#define RM9000x2_OCD_INTPIN5		0x0a54
+#define RM9000x2_OCD_INTPIN6		0x0a58
+#define RM9000x2_OCD_INTPIN7		0x0a5c
+#define RM9000x2_OCD_SEM		0x0a60
+#define RM9000x2_OCD_SEMSET		0x0a64
+#define RM9000x2_OCD_SEMCLR		0x0a68
+
+#define RM9000x2_OCD_TKT		0x0a70
+#define RM9000x2_OCD_TKTINC		0x0a74
+
+#define RM9000x2_OCD_NMICONFIG		0x0ac0		/* Interrupts */
+#define RM9000x2_OCD_INTP0PRI		0x1a80
+#define RM9000x2_OCD_INTP1PRI		0x1a80
+#define RM9000x2_OCD_INTP0STATUS0	0x1b00
+#define RM9000x2_OCD_INTP0MASK0		0x1b04
+#define RM9000x2_OCD_INTP0SET0		0x1b08
+#define RM9000x2_OCD_INTP0CLEAR0	0x1b0c
+#define RM9000x2_OCD_INTP0STATUS1	0x1b10
+#define RM9000x2_OCD_INTP0MASK1		0x1b14
+#define RM9000x2_OCD_INTP0SET1		0x1b18
+#define RM9000x2_OCD_INTP0CLEAR1	0x1b1c
+#define RM9000x2_OCD_INTP0STATUS2	0x1b20
+#define RM9000x2_OCD_INTP0MASK2		0x1b24
+#define RM9000x2_OCD_INTP0SET2		0x1b28
+#define RM9000x2_OCD_INTP0CLEAR2	0x1b2c
+#define RM9000x2_OCD_INTP0STATUS3	0x1b30
+#define RM9000x2_OCD_INTP0MASK3		0x1b34
+#define RM9000x2_OCD_INTP0SET3		0x1b38
+#define RM9000x2_OCD_INTP0CLEAR3	0x1b3c
+#define RM9000x2_OCD_INTP0STATUS4	0x1b40
+#define RM9000x2_OCD_INTP0MASK4		0x1b44
+#define RM9000x2_OCD_INTP0SET4		0x1b48
+#define RM9000x2_OCD_INTP0CLEAR4	0x1b4c
+#define RM9000x2_OCD_INTP0STATUS5	0x1b50
+#define RM9000x2_OCD_INTP0MASK5		0x1b54
+#define RM9000x2_OCD_INTP0SET5		0x1b58
+#define RM9000x2_OCD_INTP0CLEAR5	0x1b5c
+#define RM9000x2_OCD_INTP0STATUS6	0x1b60
+#define RM9000x2_OCD_INTP0MASK6		0x1b64
+#define RM9000x2_OCD_INTP0SET6		0x1b68
+#define RM9000x2_OCD_INTP0CLEAR6	0x1b6c
+#define RM9000x2_OCD_INTP0STATUS7	0x1b70
+#define RM9000x2_OCD_INTP0MASK7		0x1b74
+#define RM9000x2_OCD_INTP0SET7		0x1b78
+#define RM9000x2_OCD_INTP0CLEAR7	0x1b7c
+#define RM9000x2_OCD_INTP1STATUS0	0x2b00
+#define RM9000x2_OCD_INTP1MASK0		0x2b04
+#define RM9000x2_OCD_INTP1SET0		0x2b08
+#define RM9000x2_OCD_INTP1CLEAR0	0x2b0c
+#define RM9000x2_OCD_INTP1STATUS1	0x2b10
+#define RM9000x2_OCD_INTP1MASK1		0x2b14
+#define RM9000x2_OCD_INTP1SET1		0x2b18
+#define RM9000x2_OCD_INTP1CLEAR1	0x2b1c
+#define RM9000x2_OCD_INTP1STATUS2	0x2b20
+#define RM9000x2_OCD_INTP1MASK2		0x2b24
+#define RM9000x2_OCD_INTP1SET2		0x2b28
+#define RM9000x2_OCD_INTP1CLEAR2	0x2b2c
+#define RM9000x2_OCD_INTP1STATUS3	0x2b30
+#define RM9000x2_OCD_INTP1MASK3		0x2b34
+#define RM9000x2_OCD_INTP1SET3		0x2b38
+#define RM9000x2_OCD_INTP1CLEAR3	0x2b3c
+#define RM9000x2_OCD_INTP1STATUS4	0x2b40
+#define RM9000x2_OCD_INTP1MASK4		0x2b44
+#define RM9000x2_OCD_INTP1SET4		0x2b48
+#define RM9000x2_OCD_INTP1CLEAR4	0x2b4c
+#define RM9000x2_OCD_INTP1STATUS5	0x2b50
+#define RM9000x2_OCD_INTP1MASK5		0x2b54
+#define RM9000x2_OCD_INTP1SET5		0x2b58
+#define RM9000x2_OCD_INTP1CLEAR5	0x2b5c
+#define RM9000x2_OCD_INTP1STATUS6	0x2b60
+#define RM9000x2_OCD_INTP1MASK6		0x2b64
+#define RM9000x2_OCD_INTP1SET6		0x2b68
+#define RM9000x2_OCD_INTP1CLEAR6	0x2b6c
+#define RM9000x2_OCD_INTP1STATUS7	0x2b70
+#define RM9000x2_OCD_INTP1MASK7		0x2b74
+#define RM9000x2_OCD_INTP1SET7		0x2b78
+#define RM9000x2_OCD_INTP1CLEAR7	0x2b7c
+
+#define OCD_READ(reg)		(*(volatile unsigned int *)(ocd_base + (reg)))
+#define OCD_WRITE(reg, val)					\
+	do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0)
+
+/*
+ * Hypertransport specific macros
+ */
+#define RM9K_WRITE(ofs, data)   *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data
+
+#define RM9K_READ(ofs, val)     *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_8(ofs, val)   *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_16(ofs, val)  *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
+
+#endif 
diff --git a/include/asm-mips/tlb.h b/include/asm-mips/tlb.h
new file mode 100644
index 000000000000..80d9dfcf1e88
--- /dev/null
+++ b/include/asm-mips/tlb.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+/*
+ * MIPS doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma) 				\
+	do {							\
+		if (!tlb->fullmm)				\
+			flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+	}  while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_TLB_H */
diff --git a/include/asm-mips/tlbdebug.h b/include/asm-mips/tlbdebug.h
new file mode 100644
index 000000000000..fff7a73e22d0
--- /dev/null
+++ b/include/asm-mips/tlbdebug.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 by Ralf Baechle
+ */
+#ifndef __ASM_TLBDEBUG_H
+#define __ASM_TLBDEBUG_H
+
+/*
+ * TLB debugging functions:
+ */
+extern void dump_tlb(int first, int last);
+extern void dump_tlb_all(void);
+extern void dump_tlb_wired(void);
+extern void dump_tlb_addr(unsigned long addr);
+extern void dump_tlb_nonwired(void);
+
+#endif /* __ASM_TLBDEBUG_H */
diff --git a/include/asm-mips/tlbflush.h b/include/asm-mips/tlbflush.h
new file mode 100644
index 000000000000..bb4ae3cdcbf1
--- /dev/null
+++ b/include/asm-mips/tlbflush.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+	unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long,
+	unsigned long);
+extern void flush_tlb_kernel_range(unsigned long, unsigned long);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_one(unsigned long vaddr);
+
+#else /* CONFIG_SMP */
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma,vmaddr,end)	local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr,end) \
+	local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma,page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr)		local_flush_tlb_one(vaddr)
+
+#endif /* CONFIG_SMP */
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+	unsigned long start, unsigned long end)
+{
+	/* Nothing to do on MIPS.  */
+}
+
+#endif /* __ASM_TLBFLUSH_H */
diff --git a/include/asm-mips/topology.h b/include/asm-mips/topology.h
new file mode 100644
index 000000000000..0440fb9f2180
--- /dev/null
+++ b/include/asm-mips/topology.h
@@ -0,0 +1 @@
+#include <topology.h>
diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h
new file mode 100644
index 000000000000..179012263007
--- /dev/null
+++ b/include/asm-mips/traps.h
@@ -0,0 +1,24 @@
+/*
+ *	Trap handling definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_TRAPS_H
+#define _ASM_TRAPS_H
+
+/*
+ * Possible status responses for a board_be_handler backend.
+ */
+#define MIPS_BE_DISCARD	0		/* return with no action */
+#define MIPS_BE_FIXUP	1		/* return to the fixup code */
+#define MIPS_BE_FATAL	2		/* treat as an unrecoverable error */
+
+extern void (*board_be_init)(void);
+extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+
+#endif /* _ASM_TRAPS_H */
diff --git a/include/asm-mips/tx3912.h b/include/asm-mips/tx3912.h
new file mode 100644
index 000000000000..d709d87363d0
--- /dev/null
+++ b/include/asm-mips/tx3912.h
@@ -0,0 +1,361 @@
+/*
+ *  include/asm-mips/tx3912.h
+ *
+ *  Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Registers for TMPR3912/05 and PR31700 processors
+ */
+#ifndef _TX3912_H_
+#define _TX3912_H_
+
+/*****************************************************************************
+ *	Clock Subsystem                                                      *
+ *	---------------                                                      *
+ *	Chapter 6 in Philips PR31700 and Toshiba TMPR3905/12 User Manuals    *
+ *****************************************************************************/
+#define TX3912_CLK_CTRL					0x01c0
+
+/*
+ * Clock control register values
+ */
+#define TX3912_CLK_CTRL_CHICLKDIV_MASK			0xff000000
+#define TX3912_CLK_CTRL_ENCLKTEST			0x00800000
+#define TX3912_CLK_CTRL_CLKTESTSELSIB			0x00400000
+#define TX3912_CLK_CTRL_CHIMCLKSEL			0x00200000
+#define TX3912_CLK_CTRL_CHICLKDIR			0x00100000
+#define TX3912_CLK_CTRL_ENCHIMCLK			0x00080000
+#define TX3912_CLK_CTRL_ENVIDCLK			0x00040000
+#define TX3912_CLK_CTRL_ENMBUSCLK			0x00020000
+#define TX3912_CLK_CTRL_ENSPICLK			0x00010000
+#define TX3912_CLK_CTRL_ENTIMERCLK			0x00008000
+#define TX3912_CLK_CTRL_ENFASTTIMERCLK			0x00004000
+#define TX3912_CLK_CTRL_SIBMCLKDIR			0x00002000
+#define TX3912_CLK_CTRL_reserved1			0x00001000
+#define TX3912_CLK_CTRL_ENSIBMCLK			0x00000800
+#define TX3912_CLK_CTRL_SIBMCLKDIV_6			0x00000600
+#define TX3912_CLK_CTRL_SIBMCLKDIV_5			0x00000500
+#define TX3912_CLK_CTRL_SIBMCLKDIV_4			0x00000400
+#define TX3912_CLK_CTRL_SIBMCLKDIV_3			0x00000300
+#define TX3912_CLK_CTRL_SIBMCLKDIV_2			0x00000200
+#define TX3912_CLK_CTRL_SIBMCLKDIV_1			0x00000100
+#define TX3912_CLK_CTRL_CSERSEL				0x00000080
+#define TX3912_CLK_CTRL_CSERDIV_6			0x00000060
+#define TX3912_CLK_CTRL_CSERDIV_5			0x00000050
+#define TX3912_CLK_CTRL_CSERDIV_4			0x00000040
+#define TX3912_CLK_CTRL_CSERDIV_3			0x00000030
+#define TX3912_CLK_CTRL_CSERDIV_2			0x00000020
+#define TX3912_CLK_CTRL_CSERDIV_1			0x00000010
+#define TX3912_CLK_CTRL_ENCSERCLK			0x00000008
+#define TX3912_CLK_CTRL_ENIRCLK				0x00000004
+#define TX3912_CLK_CTRL_ENUARTACLK			0x00000002
+#define TX3912_CLK_CTRL_ENUARTBCLK			0x00000001
+
+
+/*****************************************************************************
+ *	Interrupt Subsystem                                                  *
+ *	-------------------                                                  *
+ *	Chapter 8 in Philips PR31700 and Toshiba TMPR3905/12 User Manuals    *
+ *****************************************************************************/
+#define TX3912_INT1_CLEAR				0x0100
+#define TX3912_INT2_CLEAR				0x0104
+#define TX3912_INT3_CLEAR				0x0108
+#define TX3912_INT4_CLEAR				0x010c
+#define TX3912_INT5_CLEAR				0x0110
+#define TX3912_INT1_ENABLE				0x0118
+#define TX3912_INT2_ENABLE				0x011c
+#define TX3912_INT3_ENABLE				0x0120
+#define TX3912_INT4_ENABLE				0x0124
+#define TX3912_INT5_ENABLE				0x0128
+#define TX3912_INT6_ENABLE				0x012c
+#define TX3912_INT1_STATUS				0x0100
+#define TX3912_INT2_STATUS				0x0104
+#define TX3912_INT3_STATUS				0x0108
+#define TX3912_INT4_STATUS				0x010c
+#define TX3912_INT5_STATUS				0x0110
+#define TX3912_INT6_STATUS				0x0114
+
+/*
+ * Interrupt 2 register values
+ */
+#define TX3912_INT2_UARTARXINT				0x80000000
+#define TX3912_INT2_UARTARXOVERRUNINT			0x40000000
+#define TX3912_INT2_UARTAFRAMEERRINT			0x20000000
+#define TX3912_INT2_UARTABREAKINT			0x10000000
+#define TX3912_INT2_UARTAPARITYINT			0x08000000
+#define TX3912_INT2_UARTATXINT				0x04000000
+#define TX3912_INT2_UARTATXOVERRUNINT			0x02000000
+#define TX3912_INT2_UARTAEMPTYINT			0x01000000
+#define TX3912_INT2_UARTADMAFULLINT			0x00800000
+#define TX3912_INT2_UARTADMAHALFINT			0x00400000
+#define TX3912_INT2_UARTBRXINT				0x00200000
+#define TX3912_INT2_UARTBRXOVERRUNINT			0x00100000
+#define TX3912_INT2_UARTBFRAMEERRINT			0x00080000
+#define TX3912_INT2_UARTBBREAKINT			0x00040000
+#define TX3912_INT2_UARTBPARITYINT			0x00020000
+#define TX3912_INT2_UARTBTXINT				0x00010000
+#define TX3912_INT2_UARTBTXOVERRUNINT			0x00008000
+#define TX3912_INT2_UARTBEMPTYINT			0x00004000
+#define TX3912_INT2_UARTBDMAFULLINT			0x00002000
+#define TX3912_INT2_UARTBDMAHALFINT			0x00001000
+#define TX3912_INT2_UARTA_RX_BITS			0xf8000000
+#define TX3912_INT2_UARTA_TX_BITS			0x07c00000
+#define TX3912_INT2_UARTB_RX_BITS			0x003e0000
+#define TX3912_INT2_UARTB_TX_BITS			0x0001f000
+
+/*
+ * Interrupt 5 register values
+ */
+#define TX3912_INT5_RTCINT				0x80000000
+#define TX3912_INT5_ALARMINT				0x40000000
+#define TX3912_INT5_PERINT				0x20000000
+#define TX3912_INT5_STPTIMERINT				0x10000000
+#define TX3912_INT5_POSPWRINT				0x08000000
+#define TX3912_INT5_NEGPWRINT				0x04000000
+#define TX3912_INT5_POSPWROKINT				0x02000000
+#define TX3912_INT5_NEGPWROKINT				0x01000000
+#define TX3912_INT5_POSONBUTINT				0x00800000
+#define TX3912_INT5_NEGONBUTINT				0x00400000
+#define TX3912_INT5_SPIBUFAVAILINT			0x00200000
+#define TX3912_INT5_SPIERRINT				0x00100000
+#define TX3912_INT5_SPIRCVINT				0x00080000
+#define TX3912_INT5_SPIEMPTYINT				0x00040000
+#define TX3912_INT5_IRCONSMINT				0x00020000
+#define TX3912_INT5_CARSTINT				0x00010000
+#define TX3912_INT5_POSCARINT				0x00008000
+#define TX3912_INT5_NEGCARINT				0x00004000
+#define TX3912_INT5_IOPOSINT6				0x00002000
+#define TX3912_INT5_IOPOSINT5				0x00001000
+#define TX3912_INT5_IOPOSINT4				0x00000800
+#define TX3912_INT5_IOPOSINT3				0x00000400
+#define TX3912_INT5_IOPOSINT2				0x00000200
+#define TX3912_INT5_IOPOSINT1				0x00000100
+#define TX3912_INT5_IOPOSINT0				0x00000080
+#define TX3912_INT5_IONEGINT6				0x00000040
+#define TX3912_INT5_IONEGINT5				0x00000020
+#define TX3912_INT5_IONEGINT4				0x00000010
+#define TX3912_INT5_IONEGINT3				0x00000008
+#define TX3912_INT5_IONEGINT2				0x00000004
+#define TX3912_INT5_IONEGINT1				0x00000002
+#define TX3912_INT5_IONEGINT0				0x00000001
+
+/*
+ * Interrupt 6 status register values
+ */
+#define TX3912_INT6_STATUS_IRQHIGH			0x80000000
+#define TX3912_INT6_STATUS_IRQLOW			0x40000000
+#define TX3912_INT6_STATUS_reserved6			0x3fffffc0
+#define TX3912_INT6_STATUS_INTVEC_POSNEGPWROKINT	0x0000003c
+#define TX3912_INT6_STATUS_INTVEC_ALARMINT		0x00000038
+#define TX3912_INT6_STATUS_INTVEC_PERINT		0x00000034
+#define TX3912_INT6_STATUS_INTVEC_reserved5		0x00000030
+#define TX3912_INT6_STATUS_INTVEC_UARTARXINT		0x0000002c
+#define TX3912_INT6_STATUS_INTVEC_UARTBRXINT		0x00000028
+#define TX3912_INT6_STATUS_INTVEC_reserved4		0x00000024
+#define TX3912_INT6_STATUS_INTVEC_IOPOSINT65		0x00000020
+#define TX3912_INT6_STATUS_INTVEC_reserved3		0x0000001c
+#define TX3912_INT6_STATUS_INTVEC_IONEGINT65		0x00000018
+#define TX3912_INT6_STATUS_INTVEC_reserved2		0x00000014
+#define TX3912_INT6_STATUS_INTVEC_SNDDMACNTINT		0x00000010
+#define TX3912_INT6_STATUS_INTVEC_TELDMACNTINT		0x0000000c
+#define TX3912_INT6_STATUS_INTVEC_CHIDMACNTINT		0x00000008
+#define TX3912_INT6_STATUS_INTVEC_IOPOSNEGINT0		0x00000004
+#define TX3912_INT6_STATUS_INTVEC_STDHANDLER		0x00000000
+#define TX3912_INT6_STATUS_reserved1			0x00000003
+
+/*
+ * Interrupt 6 enable register values
+ */
+#define TX3912_INT6_ENABLE_reserved5			0xfff80000
+#define TX3912_INT6_ENABLE_GLOBALEN			0x00040000
+#define TX3912_INT6_ENABLE_IRQPRITEST			0x00020000
+#define TX3912_INT6_ENABLE_IRQTEST			0x00010000
+#define TX3912_INT6_ENABLE_PRIORITYMASK_POSNEGPWROKINT	0x00008000
+#define TX3912_INT6_ENABLE_PRIORITYMASK_ALARMINT	0x00004000
+#define TX3912_INT6_ENABLE_PRIORITYMASK_PERINT		0x00002000
+#define TX3912_INT6_ENABLE_PRIORITYMASK_reserved4	0x00001000
+#define TX3912_INT6_ENABLE_PRIORITYMASK_UARTARXINT	0x00000800
+#define TX3912_INT6_ENABLE_PRIORITYMASK_UARTBRXINT	0x00000400
+#define TX3912_INT6_ENABLE_PRIORITYMASK_reserved3	0x00000200
+#define TX3912_INT6_ENABLE_PRIORITYMASK_IOPOSINT65	0x00000100
+#define TX3912_INT6_ENABLE_PRIORITYMASK_reserved2	0x00000080
+#define TX3912_INT6_ENABLE_PRIORITYMASK_IONEGINT65	0x00000040
+#define TX3912_INT6_ENABLE_PRIORITYMASK_reserved1	0x00000020
+#define TX3912_INT6_ENABLE_PRIORITYMASK_SNDDMACNTINT	0x00000010
+#define TX3912_INT6_ENABLE_PRIORITYMASK_TELDMACNTINT	0x00000008
+#define TX3912_INT6_ENABLE_PRIORITYMASK_CHIDMACNTINT	0x00000004
+#define TX3912_INT6_ENABLE_PRIORITYMASK_IOPOSNEGINT0	0x00000002
+#define TX3912_INT6_ENABLE_PRIORITYMASK_STDHANDLER	0x00000001
+#define TX3912_INT6_ENABLE_HIGH_PRIORITY		0x0000ffff
+
+
+/*****************************************************************************
+ *	Power Subsystem                                                      *
+ *	---------------                                                      *
+ *	Chapter 11 in Philips PR31700 User Manual                            *
+ *	Chapter 12 in Toshiba TMPR3905/12 User Manual                        *
+ *****************************************************************************/
+#define TX3912_POWER_CTRL				0x01c4
+
+/*
+ * Power control register values
+ */
+#define TX3912_POWER_CTRL_ONBUTN			0x80000000
+#define TX3912_POWER_CTRL_PWRINT			0x40000000
+#define TX3912_POWER_CTRL_PWROK				0x20000000
+#define TX3912_POWER_CTRL_VIDRF_MASK			0x18000000
+#define TX3912_POWER_CTRL_SLOWBUS			0x04000000
+#define TX3912_POWER_CTRL_DIVMOD			0x02000000
+#define TX3912_POWER_CTRL_reserved2			0x01ff0000
+#define TX3912_POWER_CTRL_STPTIMERVAL_MASK		0x0000f000
+#define TX3912_POWER_CTRL_ENSTPTIMER			0x00000800
+#define TX3912_POWER_CTRL_ENFORCESHUTDWN		0x00000400
+#define TX3912_POWER_CTRL_FORCESHUTDWN			0x00000200
+#define TX3912_POWER_CTRL_FORCESHUTDWNOCC		0x00000100
+#define TX3912_POWER_CTRL_SELC2MS			0x00000080
+#define TX3912_POWER_CTRL_reserved1			0x00000040
+#define TX3912_POWER_CTRL_BPDBVCC3			0x00000020
+#define TX3912_POWER_CTRL_STOPCPU			0x00000010
+#define TX3912_POWER_CTRL_DBNCONBUTN			0x00000008
+#define TX3912_POWER_CTRL_COLDSTART			0x00000004
+#define TX3912_POWER_CTRL_PWRCS				0x00000002
+#define TX3912_POWER_CTRL_VCCON				0x00000001
+
+
+/*****************************************************************************
+ *	Timer Subsystem                                                      *
+ *	---------------                                                      *
+ *	Chapter 14 in Philips PR31700 User Manual                            *
+ *	Chapter 15 in Toshiba TMPR3905/12 User Manual                        *
+ *****************************************************************************/
+#define TX3912_RTC_HIGH					0x0140
+#define TX3912_RTC_LOW					0x0144
+#define TX3912_RTC_ALARM_HIGH				0x0148
+#define TX3912_RTC_ALARM_LOW				0x014c
+#define TX3912_TIMER_CTRL				0x0150
+#define TX3912_TIMER_PERIOD				0x0154
+
+/*
+ * Timer control register values
+ */
+#define TX3912_TIMER_CTRL_FREEZEPRE			0x00000080
+#define TX3912_TIMER_CTRL_FREEZERTC			0x00000040
+#define TX3912_TIMER_CTRL_FREEZETIMER			0x00000020
+#define TX3912_TIMER_CTRL_ENPERTIMER			0x00000010
+#define TX3912_TIMER_CTRL_RTCCLEAR			0x00000008
+#define TX3912_TIMER_CTRL_TESTC8MS			0x00000004
+#define TX3912_TIMER_CTRL_ENTESTCLK			0x00000002
+#define TX3912_TIMER_CTRL_ENRTCTST			0x00000001
+
+/*
+ * The periodic timer has granularity of 868 nanoseconds which
+ * results in a count of (1.152 x 10^6 / 100) in order to achieve
+ * a 10 millisecond periodic system clock.
+ */
+#define TX3912_SYS_TIMER_VALUE				(1152000/HZ)
+
+
+/*****************************************************************************
+ *	UART Subsystem                                                       *
+ *	--------------                                                       *
+ *	Chapter 15 in Philips PR31700 User Manual                            *
+ *	Chapter 16 in Toshiba TMPR3905/12 User Manual                        *
+ *****************************************************************************/
+#define TX3912_UARTA_CTRL1				0x00b0
+#define TX3912_UARTA_CTRL2				0x00b4
+#define TX3912_UARTA_DMA_CTRL1				0x00b8
+#define TX3912_UARTA_DMA_CTRL2				0x00bc
+#define TX3912_UARTA_DMA_CNT				0x00c0
+#define TX3912_UARTA_DATA				0x00c4
+#define TX3912_UARTB_CTRL1				0x00c8
+#define TX3912_UARTB_CTRL2				0x00cc
+#define TX3912_UARTB_DMA_CTRL1				0x00d0
+#define TX3912_UARTB_DMA_CTRL2				0x00d4
+#define TX3912_UARTB_DMA_CNT				0x00d8
+#define TX3912_UARTB_DATA				0x00dc
+
+/*
+ * UART Control Register 1 values
+ */
+#define TX3912_UART_CTRL1_UARTON			0x80000000
+#define TX3912_UART_CTRL1_EMPTY				0x40000000
+#define TX3912_UART_CTRL1_PRXHOLDFULL			0x20000000
+#define TX3912_UART_CTRL1_RXHOLDFULL			0x10000000
+#define TX3912_UART_CTRL1_reserved1			0x0fff0000
+#define TX3912_UART_CTRL1_ENDMARX			0x00008000
+#define TX3912_UART_CTRL1_ENDMATX			0x00004000
+#define TX3912_UART_CTRL1_TESTMODE			0x00002000
+#define TX3912_UART_CTRL1_ENBREAKHALT			0x00001000
+#define TX3912_UART_CTRL1_ENDMATEST			0x00000800
+#define TX3912_UART_CTRL1_ENDMALOOP			0x00000400
+#define TX3912_UART_CTRL1_PULSEOPT1			0x00000200
+#define TX3912_UART_CTRL1_PULSEOPT1			0x00000100
+#define TX3912_UART_CTRL1_DTINVERT			0x00000080
+#define TX3912_UART_CTRL1_DISTXD			0x00000040
+#define TX3912_UART_CTRL1_TWOSTOP			0x00000020
+#define TX3912_UART_CTRL1_LOOPBACK			0x00000010
+#define TX3912_UART_CTRL1_BIT_7				0x00000008
+#define TX3912_UART_CTRL1_EVENPARITY			0x00000004
+#define TX3912_UART_CTRL1_ENPARITY			0x00000002
+#define TX3912_UART_CTRL1_ENUART			0x00000001
+
+/*
+ * UART Control Register 2 values
+ */
+#define TX3912_UART_CTRL2_B230400			0x0000	/*   0 */
+#define TX3912_UART_CTRL2_B115200			0x0001	/*   1 */
+#define TX3912_UART_CTRL2_B76800			0x0002	/*   2 */
+#define TX3912_UART_CTRL2_B57600			0x0003	/*   3 */
+#define TX3912_UART_CTRL2_B38400			0x0005	/*   5 */
+#define TX3912_UART_CTRL2_B19200			0x000b	/*  11 */
+#define TX3912_UART_CTRL2_B9600				0x0016	/*  22 */
+#define TX3912_UART_CTRL2_B4800				0x002f	/*  47 */
+#define TX3912_UART_CTRL2_B2400				0x005f	/*  95 */
+#define TX3912_UART_CTRL2_B1200				0x00bf	/* 191 */
+#define TX3912_UART_CTRL2_B600				0x017f	/* 383 */
+#define TX3912_UART_CTRL2_B300				0x02ff	/* 767 */
+
+/*****************************************************************************
+ *	Video Subsystem                                                      *
+ *	---------------                                                      *
+ *	Chapter 16 in Philips PR31700 User Manual                            *
+ *	Chapter 17 in Toshiba TMPR3905/12 User Manual                        *
+ *****************************************************************************/
+#define TX3912_VIDEO_CTRL1				0x0028
+#define TX3912_VIDEO_CTRL2				0x002c
+#define TX3912_VIDEO_CTRL3				0x0030
+#define TX3912_VIDEO_CTRL4				0x0034
+#define TX3912_VIDEO_CTRL5				0x0038
+#define TX3912_VIDEO_CTRL6				0x003c
+#define TX3912_VIDEO_CTRL7				0x0040
+#define TX3912_VIDEO_CTRL8				0x0044
+#define TX3912_VIDEO_CTRL9				0x0048
+#define TX3912_VIDEO_CTRL10				0x004c
+#define TX3912_VIDEO_CTRL11				0x0050
+#define TX3912_VIDEO_CTRL12				0x0054
+#define TX3912_VIDEO_CTRL13				0x0058
+#define TX3912_VIDEO_CTRL14				0x005c
+
+/*
+ * Video Control Register 1 values
+ */
+#define TX3912_VIDEO_CTRL1_LINECNT			0xffc00000
+#define TX3912_VIDEO_CTRL1_LOADDLY			0x00200000
+#define TX3912_VIDEO_CTRL1_BAUDVAL			0x001f0000
+#define TX3912_VIDEO_CTRL1_VIDDONEVAL			0x0000fe00
+#define TX3912_VIDEO_CTRL1_ENFREEZEFRAME		0x00000100
+#define TX3912_VIDEO_CTRL1_BITSEL_MASK			0x000000c0
+#define TX3912_VIDEO_CTRL1_BITSEL_8BIT_COLOR		0x000000c0
+#define TX3912_VIDEO_CTRL1_BITSEL_4BIT_GRAY		0x00000080
+#define TX3912_VIDEO_CTRL1_BITSEL_2BIT_GRAY		0x00000040
+#define TX3912_VIDEO_CTRL1_DISPSPLIT			0x00000020
+#define TX3912_VIDEO_CTRL1_DISP8			0x00000010
+#define TX3912_VIDEO_CTRL1_DFMODE			0x00000008
+#define TX3912_VIDEO_CTRL1_INVVID			0x00000004
+#define TX3912_VIDEO_CTRL1_DISPON			0x00000002
+#define TX3912_VIDEO_CTRL1_ENVID			0x00000001
+
+#endif	/* _TX3912_H_ */
diff --git a/include/asm-mips/tx4927/smsc_fdc37m81x.h b/include/asm-mips/tx4927/smsc_fdc37m81x.h
new file mode 100644
index 000000000000..5d93bab51254
--- /dev/null
+++ b/include/asm-mips/tx4927/smsc_fdc37m81x.h
@@ -0,0 +1,69 @@
+/*
+ * linux/include/asm-mips/tx4927/smsc_fdc37m81x.h
+ *
+ * Interface for smsc fdc48m81x Super IO chip
+ *
+ * Author: MontaVista Software, Inc. source@mvista.com
+ *
+ * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef _SMSC_FDC37M81X_H_
+#define _SMSC_FDC37M81X_H_
+
+/* Common Registers */
+#define SMSC_FDC37M81X_CONFIG_INDEX  0x00
+#define SMSC_FDC37M81X_CONFIG_DATA   0x01
+#define SMSC_FDC37M81X_CONF          0x02
+#define SMSC_FDC37M81X_INDEX         0x03
+#define SMSC_FDC37M81X_DNUM          0x07
+#define SMSC_FDC37M81X_DID           0x20
+#define SMSC_FDC37M81X_DREV          0x21
+#define SMSC_FDC37M81X_PCNT          0x22
+#define SMSC_FDC37M81X_PMGT          0x23
+#define SMSC_FDC37M81X_OSC           0x24
+#define SMSC_FDC37M81X_CONFPA0       0x26
+#define SMSC_FDC37M81X_CONFPA1       0x27
+#define SMSC_FDC37M81X_TEST4         0x2B
+#define SMSC_FDC37M81X_TEST5         0x2C
+#define SMSC_FDC37M81X_TEST1         0x2D
+#define SMSC_FDC37M81X_TEST2         0x2E
+#define SMSC_FDC37M81X_TEST3         0x2F
+
+/* Logical device numbers */
+#define SMSC_FDC37M81X_FDD           0x00
+#define SMSC_FDC37M81X_PARALLEL      0x03
+#define SMSC_FDC37M81X_SERIAL1       0x04
+#define SMSC_FDC37M81X_SERIAL2       0x05
+#define SMSC_FDC37M81X_KBD           0x07
+#define SMSC_FDC37M81X_AUXIO         0x08
+#define SMSC_FDC37M81X_NONE          0xff
+
+/* Logical device Config Registers */
+#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_BASEADDR0     0x60
+#define SMSC_FDC37M81X_BASEADDR1     0x61
+#define SMSC_FDC37M81X_INT           0x70
+#define SMSC_FDC37M81X_INT2          0x72
+#define SMSC_FDC37M81X_LDCR_F0       0xF0
+
+/* Chip Config Values */
+#define SMSC_FDC37M81X_CONFIG_ENTER  0x55
+#define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
+#define SMSC_FDC37M81X_CHIP_ID       0x4d
+
+unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+
+void smsc_fdc37m81x_config_beg(void);
+
+void smsc_fdc37m81x_config_end(void);
+
+void smsc_fdc37m81x_config_set(u8 reg, u8 val);
+
+#endif
diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/tx4927/toshiba_rbtx4927.h
new file mode 100644
index 000000000000..6ce1e9475f99
--- /dev/null
+++ b/include/asm-mips/tx4927/toshiba_rbtx4927.h
@@ -0,0 +1,56 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TX4927_TOSHIBA_RBTX4927_H
+#define __ASM_TX4927_TOSHIBA_RBTX4927_H
+
+#include <linux/config.h>
+#include <asm/tx4927/tx4927.h>
+#include <asm/tx4927/tx4927_mips.h>
+#ifdef CONFIG_PCI
+#include <asm/tx4927/tx4927_pci.h>
+#endif
+
+#define TOSHIBA_RBTX4927_WR08(a,b) do { TX4927_WR08(a,b); wbflush(); } while ( 0 )
+
+
+#ifdef CONFIG_PCI
+#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO
+#else
+#define TBTX4927_ISA_IO_OFFSET 0
+#endif
+
+#define RBTX4927_SW_RESET_DO         0xbc00f000
+#define RBTX4927_SW_RESET_DO_SET                0x01
+
+#define RBTX4927_SW_RESET_ENABLE     0xbc00f002
+#define RBTX4927_SW_RESET_ENABLE_SET            0x01
+
+
+#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET)
+#define RBTX4927_RTL_8019_IRQ  (29)
+
+#endif /* __ASM_TX4927_TOSHIBA_RBTX4927_H */
diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h
new file mode 100644
index 000000000000..5d939db6e220
--- /dev/null
+++ b/include/asm-mips/tx4927/tx4927.h
@@ -0,0 +1,525 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TX4927_TX4927_H
+#define __ASM_TX4927_TX4927_H
+
+#include <asm/tx4927/tx4927_mips.h>
+
+/*
+ This register naming came from the intergrate cpu/controoler name TX4927
+ followed by the device name from table 4.2.2 on page 4-3 and then followed
+ by the register name from table 4.2.3 on pages 4-4 to 4-8.  The manaul
+ used is "TMPR4927BT Preliminary Rev 0.1 20.Jul.2001".
+ */
+
+#define TX4927_SIO_0_BASE
+
+/* TX4927 controller */
+#define TX4927_BASE                     0xfff1f0000
+#define TX4927_BASE                     0xfff1f0000
+#define TX4927_LIMIT                    0xfff1fffff
+
+
+/* TX4927 SDRAM controller (64-bit registers) */
+#define TX4927_SDRAMC_BASE              0x8000 
+#define TX4927_SDRAMC_SDCCR0            0x8000 
+#define TX4927_SDRAMC_SDCCR1            0x8008
+#define TX4927_SDRAMC_SDCCR2            0x8010
+#define TX4927_SDRAMC_SDCCR3            0x8018
+#define TX4927_SDRAMC_SDCTR             0x8040
+#define TX4927_SDRAMC_SDCMD             0x8058
+#define TX4927_SDRAMC_LIMIT             0x8fff 
+
+
+/* TX4927 external bus controller (64-bit registers) */
+#define TX4927_EBUSC_BASE               0x9000
+#define TX4927_EBUSC_EBCCR0             0x9000
+#define TX4927_EBUSC_EBCCR1             0x9008
+#define TX4927_EBUSC_EBCCR2             0x9010
+#define TX4927_EBUSC_EBCCR3             0x9018
+#define TX4927_EBUSC_EBCCR4             0x9020
+#define TX4927_EBUSC_EBCCR5             0x9028
+#define TX4927_EBUSC_EBCCR6             0x9030
+#define TX4927_EBUSC_EBCCR7             0x9008
+#define TX4927_EBUSC_LIMIT              0x9fff
+
+
+/* TX4927 SDRRAM Error Check Correction (64-bit registers) */
+#define TX4927_ECC_BASE                 0xa000
+#define TX4927_ECC_ECCCR                0xa000
+#define TX4927_ECC_ECCSR                0xa008
+#define TX4927_ECC_LIMIT                0xafff
+
+
+/* TX4927 DMA Controller (64-bit registers) */
+#define TX4927_DMAC_BASE                0xb000
+#define TX4927_DMAC_TBD                 0xb000
+#define TX4927_DMAC_LIMIT               0xbfff
+
+
+/* TX4927 PCI Controller (32-bit registers) */
+#define TX4927_PCIC_BASE                0xd000
+#define TX4927_PCIC_TBD                 0xb000
+#define TX4927_PCIC_LIMIT               0xdfff
+
+
+/* TX4927 Configuration registers (64-bit registers) */
+#define TX4927_CONFIG_BASE                       0xe000
+#define TX4927_CONFIG_CCFG                       0xe000
+#define TX4927_CONFIG_CCFG_RESERVED_42_63                BM_63_42
+#define TX4927_CONFIG_CCFG_WDRST                         BM_41_41
+#define TX4927_CONFIG_CCFG_WDREXEN                       BM_40_40
+#define TX4927_CONFIG_CCFG_BCFG                          BM_39_32
+#define TX4927_CONFIG_CCFG_RESERVED_27_31                BM_31_27
+#define TX4927_CONFIG_CCFG_GTOT                          BM_26_25
+#define TX4927_CONFIG_CCFG_GTOT_4096                     BM_26_25
+#define TX4927_CONFIG_CCFG_GTOT_2048                     BM_26_26
+#define TX4927_CONFIG_CCFG_GTOT_1024                     BM_25_25
+#define TX4927_CONFIG_CCFG_GTOT_0512                   (~BM_26_25)
+#define TX4927_CONFIG_CCFG_TINTDIS                       BM_24_24
+#define TX4927_CONFIG_CCFG_PCI66                         BM_23_23
+#define TX4927_CONFIG_CCFG_PCIMODE                       BM_22_22
+#define TX4927_CONFIG_CCFG_RESERVED_20_21                BM_21_20
+#define TX4927_CONFIG_CCFG_DIVMODE                       BM_19_17
+#define TX4927_CONFIG_CCFG_DIVMODE_2_0                   BM_19_19
+#define TX4927_CONFIG_CCFG_DIVMODE_3_0                  (BM_19_19|BM_17_17)
+#define TX4927_CONFIG_CCFG_DIVMODE_4_0                   BM_19_18
+#define TX4927_CONFIG_CCFG_DIVMODE_2_5                   BM_19_17
+#define TX4927_CONFIG_CCFG_DIVMODE_8_0                 (~BM_19_17)
+#define TX4927_CONFIG_CCFG_DIVMODE_12_0                  BM_17_17
+#define TX4927_CONFIG_CCFG_DIVMODE_16_0                  BM_18_18
+#define TX4927_CONFIG_CCFG_DIVMODE_10_0                  BM_18_17
+#define TX4927_CONFIG_CCFG_BEOW                          BM_16_16
+#define TX4927_CONFIG_CCFG_WR                            BM_15_15
+#define TX4927_CONFIG_CCFG_TOE                           BM_14_14
+#define TX4927_CONFIG_CCFG_PCIARB                        BM_13_13
+#define TX4927_CONFIG_CCFG_PCIDIVMODE                    BM_12_11
+#define TX4927_CONFIG_CCFG_RESERVED_08_10                BM_10_08
+#define TX4927_CONFIG_CCFG_SYSSP                         BM_07_06
+#define TX4927_CONFIG_CCFG_RESERVED_03_05                BM_05_03
+#define TX4927_CONFIG_CCFG_ENDIAN                        BM_02_02
+#define TX4927_CONFIG_CCFG_ARMODE                        BM_01_01
+#define TX4927_CONFIG_CCFG_ACEHOLD                       BM_00_00
+#define TX4927_CONFIG_REVID                      0xe008
+#define TX4927_CONFIG_REVID_RESERVED_32_63               BM_32_63
+#define TX4927_CONFIG_REVID_PCODE                        BM_16_31
+#define TX4927_CONFIG_REVID_MJERREV                      BM_12_15
+#define TX4927_CONFIG_REVID_MINEREV                      BM_08_11
+#define TX4927_CONFIG_REVID_MJREV                        BM_04_07
+#define TX4927_CONFIG_REVID_MINREV                       BM_00_03
+#define TX4927_CONFIG_PCFG                       0xe010
+#define TX4927_CONFIG_PCFG_RESERVED_57_63                BM_57_63
+#define TX4927_CONFIG_PCFG_DRVDATA                       BM_56_56
+#define TX4927_CONFIG_PCFG_DRVCB                         BM_55_55
+#define TX4927_CONFIG_PCFG_DRVDQM                        BM_54_54
+#define TX4927_CONFIG_PCFG_DRVADDR                       BM_53_53
+#define TX4927_CONFIG_PCFG_DRVCKE                        BM_52_52
+#define TX4927_CONFIG_PCFG_DRVRAS                        BM_51_51
+#define TX4927_CONFIG_PCFG_DRVCAS                        BM_50_50
+#define TX4927_CONFIG_PCFG_DRVWE                         BM_49_49
+#define TX4927_CONFIG_PCFG_DRVCS3                        BM_48_48
+#define TX4927_CONFIG_PCFG_DRVCS2                        BM_47_47
+#define TX4927_CONFIG_PCFG_DRVCS1                        BM_46_4k
+#define TX4927_CONFIG_PCFG_DRVCS0                        BM_45_45
+#define TX4927_CONFIG_PCFG_DRVCK3                        BM_44_44
+#define TX4927_CONFIG_PCFG_DRVCK2                        BM_43_43
+#define TX4927_CONFIG_PCFG_DRVCK1                        BM_42_42
+#define TX4927_CONFIG_PCFG_DRVCK0                        BM_41_41
+#define TX4927_CONFIG_PCFG_DRVCKIN                       BM_40_40
+#define TX4927_CONFIG_PCFG_RESERVED_33_39                BM_33_39
+#define TX4927_CONFIG_PCFG_BYPASS_PLL                    BM_32_32
+#define TX4927_CONFIG_PCFG_RESERVED_30_31                BM_30_31
+#define TX4927_CONFIG_PCFG_SDCLKDLY                      BM_28_29
+#define TX4927_CONFIG_PCFG_SDCLKDLY_DELAY_1            (~BM_28_29)
+#define TX4927_CONFIG_PCFG_SDCLKDLY_DELAY_2              BM_28_28
+#define TX4927_CONFIG_PCFG_SDCLKDLY_DELAY_3              BM_29_29
+#define TX4927_CONFIG_PCFG_SDCLKDLY_DELAY_4              BM_28_29
+#define TX4927_CONFIG_PCFG_SYSCLKEN                      BM_27_27
+#define TX4927_CONFIG_PCFG_SDCLKEN3                      BM_26_26
+#define TX4927_CONFIG_PCFG_SDCLKEN2                      BM_25_25
+#define TX4927_CONFIG_PCFG_SDCLKEN1                      BM_24_24
+#define TX4927_CONFIG_PCFG_SDCLKEN0                      BM_23_23
+#define TX4927_CONFIG_PCFG_SDCLKINEN                     BM_22_22
+#define TX4927_CONFIG_PCFG_PCICLKEN5                     BM_21_21
+#define TX4927_CONFIG_PCFG_PCICLKEN4                     BM_20_20
+#define TX4927_CONFIG_PCFG_PCICLKEN3                     BM_19_19
+#define TX4927_CONFIG_PCFG_PCICLKEN2                     BM_18_18
+#define TX4927_CONFIG_PCFG_PCICLKEN1                     BM_17_17
+#define TX4927_CONFIG_PCFG_PCICLKEN0                     BM_16_16
+#define TX4927_CONFIG_PCFG_RESERVED_10_15                BM_10_15
+#define TX4927_CONFIG_PCFG_SEL2                          BM_09_09
+#define TX4927_CONFIG_PCFG_SEL1                          BM_08_08
+#define TX4927_CONFIG_PCFG_DMASEL3                       BM_06_07
+#define TX4927_CONFIG_PCFG_DMASEL3_DMAREQ3             (~BM_06_07)
+#define TX4927_CONFIG_PCFG_DMASEL3_SIO0                  BM_06_06
+#define TX4927_CONFIG_PCFG_DMASEL3_ACLC3                 BM_07_07
+#define TX4927_CONFIG_PCFG_DMASEL3_ACLC1                 BM_06_07
+#define TX4927_CONFIG_PCFG_DMASEL2                       BM_06_07
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_0_DMAREQ2      (~BM_06_07)
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_0_SIO0           BM_06_06
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_0_RESERVED_10    BM_07_07
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_0_RESERVED_11    BM_06_07
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_1_ACLC1        (~BM_06_07)
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_1_SIO0           BM_06_06
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_1_ACLC2          BM_07_07
+#define TX4927_CONFIG_PCFG_DMASEL2_SEL2_1_ACLC0          BM_06_07
+#define TX4927_CONFIG_PCFG_DMASEL1                       BM_02_03
+#define TX4927_CONFIG_PCFG_DMASEL1_DMAREQ1             (~BM_02_03)
+#define TX4927_CONFIG_PCFG_DMASEL1_SIO1                  BM_02_02
+#define TX4927_CONFIG_PCFG_DMASEL1_ACLC1                 BM_03_03
+#define TX4927_CONFIG_PCFG_DMASEL1_ACLC3                 BM_02_03
+#define TX4927_CONFIG_PCFG_DMASEL0                       BM_00_01
+#define TX4927_CONFIG_PCFG_DMASEL0_DMAREQ0             (~BM_00_01)
+#define TX4927_CONFIG_PCFG_DMASEL0_SIO1                  BM_00_00
+#define TX4927_CONFIG_PCFG_DMASEL0_ACLC0                 BM_01_01
+#define TX4927_CONFIG_PCFG_DMASEL0_ACLC2                 BM_00_01
+#define TX4927_CONFIG_TOEA                       0xe018
+#define TX4927_CONFIG_TOEA_RESERVED_36_63                BM_36_63
+#define TX4927_CONFIG_TOEA_TOEA                          BM_00_35
+#define TX4927_CONFIG_CLKCTR                     0xe020
+#define TX4927_CONFIG_CLKCTR_RESERVED_26_63              BM_26_63
+#define TX4927_CONFIG_CLKCTR_ACLCKD                      BM_25_25
+#define TX4927_CONFIG_CLKCTR_PIOCKD                      BM_24_24
+#define TX4927_CONFIG_CLKCTR_DMACKD                      BM_23_23
+#define TX4927_CONFIG_CLKCTR_PCICKD                      BM_22_22
+#define TX4927_CONFIG_CLKCTR_SET_21                      BM_21_21
+#define TX4927_CONFIG_CLKCTR_TM0CKD                      BM_20_20
+#define TX4927_CONFIG_CLKCTR_TM1CKD                      BM_19_19
+#define TX4927_CONFIG_CLKCTR_TM2CKD                      BM_18_18
+#define TX4927_CONFIG_CLKCTR_SIO0CKD                     BM_17_17
+#define TX4927_CONFIG_CLKCTR_SIO1CKD                     BM_16_16
+#define TX4927_CONFIG_CLKCTR_RESERVED_10_15              BM_10_15
+#define TX4927_CONFIG_CLKCTR_ACLRST                      BM_09_09
+#define TX4927_CONFIG_CLKCTR_PIORST                      BM_08_08
+#define TX4927_CONFIG_CLKCTR_DMARST                      BM_07_07
+#define TX4927_CONFIG_CLKCTR_PCIRST                      BM_06_06
+#define TX4927_CONFIG_CLKCTR_RESERVED_05_05              BM_05_05
+#define TX4927_CONFIG_CLKCTR_TM0RST                      BM_04_04
+#define TX4927_CONFIG_CLKCTR_TM1RST                      BM_03_03
+#define TX4927_CONFIG_CLKCTR_TM2RST                      BM_02_02
+#define TX4927_CONFIG_CLKCTR_SIO0RST                     BM_01_01
+#define TX4927_CONFIG_CLKCTR_SIO1RST                     BM_00_00
+#define TX4927_CONFIG_GARBC                      0xe030
+#define TX4927_CONFIG_GARBC_RESERVED_10_63               BM_10_63
+#define TX4927_CONFIG_GARBC_SET_09                       BM_09_09
+#define TX4927_CONFIG_GARBC_ARBMD                        BM_08_08
+#define TX4927_CONFIG_GARBC_RESERVED_06_07               BM_06_07
+#define TX4927_CONFIG_GARBC_PRIORITY_H1                  BM_04_05
+#define TX4927_CONFIG_GARBC_PRIORITY_H1_PCI            (~BM_04_05)
+#define TX4927_CONFIG_GARBC_PRIORITY_H1_PDMAC            BM_04_04
+#define TX4927_CONFIG_GARBC_PRIORITY_H1_DMAC             BM_05_05
+#define TX4927_CONFIG_GARBC_PRIORITY_H1_BAD_VALUE        BM_04_05
+#define TX4927_CONFIG_GARBC_PRIORITY_H2                  BM_02_03
+#define TX4927_CONFIG_GARBC_PRIORITY_H2_PCI            (~BM_02_03)
+#define TX4927_CONFIG_GARBC_PRIORITY_H2_PDMAC            BM_02_02
+#define TX4927_CONFIG_GARBC_PRIORITY_H2_DMAC             BM_03_03
+#define TX4927_CONFIG_GARBC_PRIORITY_H2_BAD_VALUE        BM_02_03
+#define TX4927_CONFIG_GARBC_PRIORITY_H3                  BM_00_01
+#define TX4927_CONFIG_GARBC_PRIORITY_H3_PCI            (~BM_00_01)
+#define TX4927_CONFIG_GARBC_PRIORITY_H3_PDMAC            BM_00_00
+#define TX4927_CONFIG_GARBC_PRIORITY_H3_DMAC             BM_01_01
+#define TX4927_CONFIG_GARBC_PRIORITY_H3_BAD_VALUE        BM_00_01
+#define TX4927_CONFIG_RAMP                       0xe048
+#define TX4927_CONFIG_RAMP_RESERVED_20_63                BM_20_63
+#define TX4927_CONFIG_RAMP_RAMP                          BM_00_19
+#define TX4927_CONFIG_LIMIT                      0xefff
+
+
+/* TX4927 Timer 0 (32-bit registers) */
+#define TX4927_TMR0_BASE                0xf000
+#define TX4927_TMR0_TMTCR0              0xf004
+#define TX4927_TMR0_TMTISR0             0xf008
+#define TX4927_TMR0_TMCPRA0             0xf008
+#define TX4927_TMR0_TMCPRB0             0xf00c
+#define TX4927_TMR0_TMITMR0             0xf010
+#define TX4927_TMR0_TMCCDR0             0xf020
+#define TX4927_TMR0_TMPGMR0             0xf030
+#define TX4927_TMR0_TMTRR0              0xf0f0
+#define TX4927_TMR0_LIMIT               0xf0ff
+
+
+/* TX4927 Timer 1 (32-bit registers) */
+#define TX4927_TMR1_BASE                0xf100
+#define TX4927_TMR1_TMTCR1              0xf104
+#define TX4927_TMR1_TMTISR1             0xf108
+#define TX4927_TMR1_TMCPRA1             0xf108
+#define TX4927_TMR1_TMCPRB1             0xf10c
+#define TX4927_TMR1_TMITMR1             0xf110
+#define TX4927_TMR1_TMCCDR1             0xf120
+#define TX4927_TMR1_TMPGMR1             0xf130
+#define TX4927_TMR1_TMTRR1              0xf1f0
+#define TX4927_TMR1_LIMIT               0xf1ff
+
+
+/* TX4927 Timer 2 (32-bit registers) */
+#define TX4927_TMR2_BASE                0xf200
+#define TX4927_TMR2_TMTCR2              0xf104
+#define TX4927_TMR2_TMTISR2             0xf208
+#define TX4927_TMR2_TMCPRA2             0xf208
+#define TX4927_TMR2_TMCPRB2             0xf20c
+#define TX4927_TMR2_TMITMR2             0xf210
+#define TX4927_TMR2_TMCCDR2             0xf220
+#define TX4927_TMR2_TMPGMR2             0xf230
+#define TX4927_TMR2_TMTRR2              0xf2f0
+#define TX4927_TMR2_LIMIT               0xf2ff
+
+
+/* TX4927 serial port 0 (32-bit registers) */
+#define TX4927_SIO0_BASE                         0xf300 
+#define TX4927_SIO0_SILCR0                       0xf300 
+#define TX4927_SIO0_SILCR0_RESERVED_16_31                BM_16_31
+#define TX4927_SIO0_SILCR0_RWUB                          BM_15_15
+#define TX4927_SIO0_SILCR0_TWUB                          BM_14_14
+#define TX4927_SIO0_SILCR0_UODE                          BM_13_13
+#define TX4927_SIO0_SILCR0_RESERVED_07_12                BM_07_12
+#define TX4927_SIO0_SILCR0_SCS                           BM_05_06
+#define TX4927_SIO0_SILCR0_SCS_IMBUSCLK_IC             (~BM_05_06)
+#define TX4927_SIO0_SILCR0_SCS_IMBUSCLK_BRG              BM_05_05
+#define TX4927_SIO0_SILCR0_SCS_SCLK_EC                   BM_06_06
+#define TX4927_SIO0_SILCR0_SCS_SCLK_BRG                  BM_05_06
+#define TX4927_SIO0_SILCR0_UEPS                          BM_04_04
+#define TX4927_SIO0_SILCR0_UPEN                          BM_03_03
+#define TX4927_SIO0_SILCR0_USBL                          BM_02_02
+#define TX4927_SIO0_SILCR0_UMODE                         BM_00_01
+#define TX4927_SIO0_SILCR0_UMODE_DATA_8_BIT              BM_00_01
+#define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT            (~BM_00_01)
+#define TX4927_SIO0_SILCR0_UMODE_DATA_8_BIT_MC           BM_01_01
+#define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT_MC           BM_00_01
+#define TX4927_SIO0_SIDICR0                      0xf304 
+#define TX4927_SIO0_SIDICR0_RESERVED_16_31               BM_16_31
+#define TX4927_SIO0_SIDICR0_TDE                          BM_15_15
+#define TX4927_SIO0_SIDICR0_RDE                          BM_14_14
+#define TX4927_SIO0_SIDICR0_TIE                          BM_13_13
+#define TX4927_SIO0_SIDICR0_RIE                          BM_12_12
+#define TX4927_SIO0_SIDICR0_SPIE                         BM_11_11
+#define TX4927_SIO0_SIDICR0_CTSAC                        BM_09_10
+#define TX4927_SIO0_SIDICR0_CTSAC_NONE                 (~BM_09_10)
+#define TX4927_SIO0_SIDICR0_CTSAC_RISE                   BM_09_09
+#define TX4927_SIO0_SIDICR0_CTSAC_FALL                   BM_10_10
+#define TX4927_SIO0_SIDICR0_CTSAC_BOTH                   BM_09_10
+#define TX4927_SIO0_SIDICR0_RESERVED_06_08               BM_06_08
+#define TX4927_SIO0_SIDICR0_STIE                         BM_00_05
+#define TX4927_SIO0_SIDICR0_STIE_NONE                  (~BM_00_05)
+#define TX4927_SIO0_SIDICR0_STIE_OERS                    BM_05_05
+#define TX4927_SIO0_SIDICR0_STIE_CTSAC                   BM_04_04
+#define TX4927_SIO0_SIDICR0_STIE_RBRKD                   BM_03_03
+#define TX4927_SIO0_SIDICR0_STIE_TRDY                    BM_02_02
+#define TX4927_SIO0_SIDICR0_STIE_TXALS                   BM_01_01
+#define TX4927_SIO0_SIDICR0_STIE_UBRKD                   BM_00_00
+#define TX4927_SIO0_SIDISR0                      0xf308 
+#define TX4927_SIO0_SIDISR0_RESERVED_16_31               BM_16_31
+#define TX4927_SIO0_SIDISR0_UBRK                         BM_15_15
+#define TX4927_SIO0_SIDISR0_UVALID                       BM_14_14
+#define TX4927_SIO0_SIDISR0_UFER                         BM_13_13
+#define TX4927_SIO0_SIDISR0_UPER                         BM_12_12
+#define TX4927_SIO0_SIDISR0_UOER                         BM_11_11
+#define TX4927_SIO0_SIDISR0_ERI                          BM_10_10
+#define TX4927_SIO0_SIDISR0_TOUT                         BM_09_09
+#define TX4927_SIO0_SIDISR0_TDIS                         BM_08_08
+#define TX4927_SIO0_SIDISR0_RDIS                         BM_07_07
+#define TX4927_SIO0_SIDISR0_STIS                         BM_06_06
+#define TX4927_SIO0_SIDISR0_RESERVED_05_05               BM_05_05
+#define TX4927_SIO0_SIDISR0_RFDN                         BM_00_04
+#define TX4927_SIO0_SISCISR0                     0xf30c 
+#define TX4927_SIO0_SISCISR0_RESERVED_06_31              BM_06_31
+#define TX4927_SIO0_SISCISR0_OERS                        BM_05_05
+#define TX4927_SIO0_SISCISR0_CTSS                        BM_04_04
+#define TX4927_SIO0_SISCISR0_RBRKD                       BM_03_03
+#define TX4927_SIO0_SISCISR0_TRDY                        BM_02_02
+#define TX4927_SIO0_SISCISR0_TXALS                       BM_01_01
+#define TX4927_SIO0_SISCISR0_UBRKD                       BM_00_00
+#define TX4927_SIO0_SIFCR0                       0xf310 
+#define TX4927_SIO0_SIFCR0_RESERVED_16_31                BM_16_31
+#define TX4927_SIO0_SIFCR0_SWRST                         BM_16_31
+#define TX4927_SIO0_SIFCR0_RESERVED_09_14                BM_09_14
+#define TX4927_SIO0_SIFCR0_RDIL                          BM_16_31
+#define TX4927_SIO0_SIFCR0_RDIL_BYTES_1                (~BM_07_08)
+#define TX4927_SIO0_SIFCR0_RDIL_BYTES_4                  BM_07_07
+#define TX4927_SIO0_SIFCR0_RDIL_BYTES_8                  BM_08_08
+#define TX4927_SIO0_SIFCR0_RDIL_BYTES_12                 BM_07_08
+#define TX4927_SIO0_SIFCR0_RESERVED_05_06                BM_05_06
+#define TX4927_SIO0_SIFCR0_TDIL                          BM_03_04
+#define TX4927_SIO0_SIFCR0_TDIL_BYTES_1                (~BM_03_04)
+#define TX4927_SIO0_SIFCR0_TDIL_BYTES_4                  BM_03_03
+#define TX4927_SIO0_SIFCR0_TDIL_BYTES_8                  BM_04_04
+#define TX4927_SIO0_SIFCR0_TDIL_BYTES_0                  BM_03_04
+#define TX4927_SIO0_SIFCR0_TFRST                         BM_02_02
+#define TX4927_SIO0_SIFCR0_RFRST                         BM_01_01
+#define TX4927_SIO0_SIFCR0_FRSTE                         BM_00_00
+#define TX4927_SIO0_SIFLCR0                      0xf314 
+#define TX4927_SIO0_SIFLCR0_RESERVED_13_31               BM_13_31
+#define TX4927_SIO0_SIFLCR0_RCS                          BM_12_12
+#define TX4927_SIO0_SIFLCR0_TES                          BM_11_11
+#define TX4927_SIO0_SIFLCR0_RESERVED_10_10               BM_10_10
+#define TX4927_SIO0_SIFLCR0_RTSSC                        BM_09_09
+#define TX4927_SIO0_SIFLCR0_RSDE                         BM_08_08
+#define TX4927_SIO0_SIFLCR0_TSDE                         BM_07_07
+#define TX4927_SIO0_SIFLCR0_RESERVED_05_06               BM_05_06
+#define TX4927_SIO0_SIFLCR0_RTSTL                        BM_01_04
+#define TX4927_SIO0_SIFLCR0_TBRK                         BM_00_00
+#define TX4927_SIO0_SIBGR0                       0xf318 
+#define TX4927_SIO0_SIBGR0_RESERVED_10_31                BM_10_31
+#define TX4927_SIO0_SIBGR0_BCLK                          BM_08_09
+#define TX4927_SIO0_SIBGR0_BCLK_T0                     (~BM_08_09)
+#define TX4927_SIO0_SIBGR0_BCLK_T2                       BM_08_08
+#define TX4927_SIO0_SIBGR0_BCLK_T4                       BM_09_09
+#define TX4927_SIO0_SIBGR0_BCLK_T6                       BM_08_09
+#define TX4927_SIO0_SIBGR0_BRD                           BM_00_07
+#define TX4927_SIO0_SITFIF00                     0xf31c 
+#define TX4927_SIO0_SITFIF00_RESERVED_08_31              BM_08_31
+#define TX4927_SIO0_SITFIF00_TXD                         BM_00_07
+#define TX4927_SIO0_SIRFIFO0                     0xf320          
+#define TX4927_SIO0_SIRFIFO0_RESERVED_08_31              BM_08_31
+#define TX4927_SIO0_SIRFIFO0_RXD                         BM_00_07
+#define TX4927_SIO0_SIRFIFO0                     0xf320          
+#define TX4927_SIO0_LIMIT                        0xf3ff 
+
+
+/* TX4927 serial port 1 (32-bit registers) */
+#define TX4927_SIO1_BASE                0xf400 
+#define TX4927_SIO1_SILCR1              0xf400 
+#define TX4927_SIO1_SIDICR1             0xf404 
+#define TX4927_SIO1_SIDISR1             0xf408 
+#define TX4927_SIO1_SISCISR1            0xf40c 
+#define TX4927_SIO1_SIFCR1              0xf410 
+#define TX4927_SIO1_SIFLCR1             0xf414 
+#define TX4927_SIO1_SIBGR1              0xf418 
+#define TX4927_SIO1_SITFIF01            0xf41c 
+#define TX4927_SIO1_SIRFIFO1            0xf420 
+#define TX4927_SIO1_LIMIT               0xf4ff 
+
+
+/* TX4927 parallel port (32-bit registers) */
+#define TX4927_PIO_BASE                 0xf500
+#define TX4927_PIO_PIOD0                0xf500
+#define TX4927_PIO_PIODI                0xf504
+#define TX4927_PIO_PIODIR               0xf508
+#define TX4927_PIO_PIOOD                0xf50c
+#define TX4927_PIO_LIMIT                0xf50f
+
+
+/* TX4927 Interrupt Controller (32-bit registers) */
+#define TX4927_IRC_BASE                 0xf510
+#define TX4927_IRC_IRFLAG0              0xf510
+#define TX4927_IRC_IRFLAG1              0xf514
+#define TX4927_IRC_IRPOL                0xf518
+#define TX4927_IRC_IRRCNT               0xf51c
+#define TX4927_IRC_IRMASKINT            0xf520
+#define TX4927_IRC_IRMASKEXT            0xf524
+#define TX4927_IRC_IRDEN                0xf600
+#define TX4927_IRC_IRDM0                0xf604
+#define TX4927_IRC_IRDM1                0xf608
+#define TX4927_IRC_IRLVL0               0xf610
+#define TX4927_IRC_IRLVL1               0xf614
+#define TX4927_IRC_IRLVL2               0xf618
+#define TX4927_IRC_IRLVL3               0xf61c
+#define TX4927_IRC_IRLVL4               0xf620
+#define TX4927_IRC_IRLVL5               0xf624
+#define TX4927_IRC_IRLVL6               0xf628
+#define TX4927_IRC_IRLVL7               0xf62c
+#define TX4927_IRC_IRMSK                0xf640
+#define TX4927_IRC_IREDC                0xf660
+#define TX4927_IRC_IRPND                0xf680
+#define TX4927_IRC_IRCS                 0xf6a0
+#define TX4927_IRC_LIMIT                0xf6ff
+
+
+/* TX4927 AC-link controller (32-bit registers) */
+#define TX4927_ACLC_BASE                0xf700
+#define TX4927_ACLC_ACCTLEN             0xf700
+#define TX4927_ACLC_ACCTLDIS            0xf704
+#define TX4927_ACLC_ACREGACC            0xf708
+#define TX4927_ACLC_ACINTSTS            0xf710
+#define TX4927_ACLC_ACINTMSTS           0xf714
+#define TX4927_ACLC_ACINTEN             0xf718
+#define TX4927_ACLC_ACINTDIS            0xf71c
+#define TX4927_ACLC_ACSEMAPH            0xf720
+#define TX4927_ACLC_ACGPIDAT            0xf740
+#define TX4927_ACLC_ACGPODAT            0xf744
+#define TX4927_ACLC_ACSLTEN             0xf748
+#define TX4927_ACLC_ACSLTDIS            0xf74c
+#define TX4927_ACLC_ACFIFOSTS           0xf750
+#define TX4927_ACLC_ACDMASTS            0xf780
+#define TX4927_ACLC_ACDMASEL            0xf784
+#define TX4927_ACLC_ACAUDODAT           0xf7a0
+#define TX4927_ACLC_ACSURRDAT           0xf7a4
+#define TX4927_ACLC_ACCENTDAT           0xf7a8
+#define TX4927_ACLC_ACLFEDAT            0xf7ac
+#define TX4927_ACLC_ACAUDIDAT           0xf7b0
+#define TX4927_ACLC_ACMODODAT           0xf7b8
+#define TX4927_ACLC_ACMODIDAT           0xf7bc
+#define TX4927_ACLC_ACREVID             0xf7fc
+#define TX4927_ACLC_LIMIT               0xf7ff
+
+
+#define TX4927_REG(x) ((TX4927_BASE)+(x))
+
+#define TX4927_RD08( reg      )   (*(vu08*)(reg))
+#define TX4927_WR08( reg, val )  ((*(vu08*)(reg))=(val))
+
+#define TX4927_RD16( reg      )   (*(vu16*)(reg))
+#define TX4927_WR16( reg, val )  ((*(vu16*)(reg))=(val))
+
+#define TX4927_RD32( reg      )   (*(vu32*)(reg))
+#define TX4927_WR32( reg, val )  ((*(vu32*)(reg))=(val))
+
+#define TX4927_RD64( reg      )   (*(vu64*)(reg))
+#define TX4927_WR64( reg, val )  ((*(vu64*)(reg))=(val))
+
+#define TX4927_RD( reg      ) TX4927_RD32( reg )
+#define TX4927_WR( reg, val ) TX4927_WR32( reg, val )
+
+
+
+
+
+#define MI8259_IRQ_ISA_RAW_BEG   0    /* optional backplane i8259 */
+#define MI8259_IRQ_ISA_RAW_END  15
+#define TX4927_IRQ_CP0_RAW_BEG   0    /* tx4927 cpu built-in cp0 */
+#define TX4927_IRQ_CP0_RAW_END   7
+#define TX4927_IRQ_PIC_RAW_BEG   0    /* tx4927 cpu build-in pic */
+#define TX4927_IRQ_PIC_RAW_END  31
+
+
+#define MI8259_IRQ_ISA_BEG                          MI8259_IRQ_ISA_RAW_BEG   /*  0 */
+#define MI8259_IRQ_ISA_END                          MI8259_IRQ_ISA_RAW_END   /* 15 */
+
+#define TX4927_IRQ_CP0_BEG  ((MI8259_IRQ_ISA_END+1)+TX4927_IRQ_CP0_RAW_BEG)  /* 16 */
+#define TX4927_IRQ_CP0_END  ((MI8259_IRQ_ISA_END+1)+TX4927_IRQ_CP0_RAW_END)  /* 23 */
+
+#define TX4927_IRQ_PIC_BEG  ((TX4927_IRQ_CP0_END+1)+TX4927_IRQ_PIC_RAW_BEG)  /* 24 */
+#define TX4927_IRQ_PIC_END  ((TX4927_IRQ_CP0_END+1)+TX4927_IRQ_PIC_RAW_END)  /* 55 */
+
+
+#define TX4927_IRQ_USER0            (TX4927_IRQ_CP0_BEG+0)
+#define TX4927_IRQ_USER1            (TX4927_IRQ_CP0_BEG+1)
+#define TX4927_IRQ_NEST_PIC_ON_CP0  (TX4927_IRQ_CP0_BEG+2)
+#define TX4927_IRQ_CPU_TIMER        (TX4927_IRQ_CP0_BEG+7)
+
+#define TX4927_IRQ_NEST_EXT_ON_PIC  (TX4927_IRQ_PIC_BEG+3)
+
+#endif /* __ASM_TX4927_TX4927_H */
diff --git a/include/asm-mips/tx4927/tx4927_mips.h b/include/asm-mips/tx4927/tx4927_mips.h
new file mode 100644
index 000000000000..242ab93bf2e2
--- /dev/null
+++ b/include/asm-mips/tx4927/tx4927_mips.h
@@ -0,0 +1,4177 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TX4927_TX4927_MIPS_H
+#define __ASM_TX4927_TX4927_MIPS_H
+
+#ifndef __ASSEMBLY__
+
+static inline void asm_wait(void)
+{
+	__asm__(".set\tmips3\n\t"
+		"wait\n\t"
+		".set\tmips0");
+}
+
+#define reg_rd08(r)    ((u8 )(*((vu8 *)(r))))
+#define reg_rd16(r)    ((u16)(*((vu16*)(r))))
+#define reg_rd32(r)    ((u32)(*((vu32*)(r))))
+#define reg_rd64(r)    ((u64)(*((vu64*)(r))))
+
+#define reg_wr08(r,v)  ((*((vu8 *)(r)))=((u8 )(v)))
+#define reg_wr16(r,v)  ((*((vu16*)(r)))=((u16)(v)))
+#define reg_wr32(r,v)  ((*((vu32*)(r)))=((u32)(v)))
+#define reg_wr64(r,v)  ((*((vu64*)(r)))=((u64)(v)))
+
+typedef volatile __signed char vs8;
+typedef volatile unsigned char vu8;
+
+typedef volatile __signed short vs16;
+typedef volatile unsigned short vu16;
+
+typedef volatile __signed int vs32;
+typedef volatile unsigned int vu32;
+
+typedef  s8  s08;
+typedef vs8 vs08;
+
+typedef  u8  u08;
+typedef vu8 vu08;
+
+
+#if (_MIPS_SZLONG == 64)
+
+typedef volatile __signed__ long vs64;
+typedef volatile unsigned long vu64;
+
+#else
+
+typedef volatile __signed__ long long vs64;
+typedef volatile unsigned long long vu64;
+
+#endif
+
+
+#define BM_00_00 0x0000000000000001
+#define BM_01_00 0x0000000000000003
+#define BM_00_01 BM_01_00
+#define BM_02_00 0x0000000000000007
+#define BM_00_02 BM_02_00
+#define BM_03_00 0x000000000000000f
+#define BM_00_03 BM_03_00
+#define BM_04_00 0x000000000000001f
+#define BM_00_04 BM_04_00
+#define BM_05_00 0x000000000000003f
+#define BM_00_05 BM_05_00
+#define BM_06_00 0x000000000000007f
+#define BM_00_06 BM_06_00
+#define BM_07_00 0x00000000000000ff
+#define BM_00_07 BM_07_00
+#define BM_08_00 0x00000000000001ff
+#define BM_00_08 BM_08_00
+#define BM_09_00 0x00000000000003ff
+#define BM_00_09 BM_09_00
+#define BM_10_00 0x00000000000007ff
+#define BM_00_10 BM_10_00
+#define BM_11_00 0x0000000000000fff
+#define BM_00_11 BM_11_00
+#define BM_12_00 0x0000000000001fff
+#define BM_00_12 BM_12_00
+#define BM_13_00 0x0000000000003fff
+#define BM_00_13 BM_13_00
+#define BM_14_00 0x0000000000007fff
+#define BM_00_14 BM_14_00
+#define BM_15_00 0x000000000000ffff
+#define BM_00_15 BM_15_00
+#define BM_16_00 0x000000000001ffff
+#define BM_00_16 BM_16_00
+#define BM_17_00 0x000000000003ffff
+#define BM_00_17 BM_17_00
+#define BM_18_00 0x000000000007ffff
+#define BM_00_18 BM_18_00
+#define BM_19_00 0x00000000000fffff
+#define BM_00_19 BM_19_00
+#define BM_20_00 0x00000000001fffff
+#define BM_00_20 BM_20_00
+#define BM_21_00 0x00000000003fffff
+#define BM_00_21 BM_21_00
+#define BM_22_00 0x00000000007fffff
+#define BM_00_22 BM_22_00
+#define BM_23_00 0x0000000000ffffff
+#define BM_00_23 BM_23_00
+#define BM_24_00 0x0000000001ffffff
+#define BM_00_24 BM_24_00
+#define BM_25_00 0x0000000003ffffff
+#define BM_00_25 BM_25_00
+#define BM_26_00 0x0000000007ffffff
+#define BM_00_26 BM_26_00
+#define BM_27_00 0x000000000fffffff
+#define BM_00_27 BM_27_00
+#define BM_28_00 0x000000001fffffff
+#define BM_00_28 BM_28_00
+#define BM_29_00 0x000000003fffffff
+#define BM_00_29 BM_29_00
+#define BM_30_00 0x000000007fffffff
+#define BM_00_30 BM_30_00
+#define BM_31_00 0x00000000ffffffff
+#define BM_00_31 BM_31_00
+#define BM_32_00 0x00000001ffffffff
+#define BM_00_32 BM_32_00
+#define BM_33_00 0x00000003ffffffff
+#define BM_00_33 BM_33_00
+#define BM_34_00 0x00000007ffffffff
+#define BM_00_34 BM_34_00
+#define BM_35_00 0x0000000fffffffff
+#define BM_00_35 BM_35_00
+#define BM_36_00 0x0000001fffffffff
+#define BM_00_36 BM_36_00
+#define BM_37_00 0x0000003fffffffff
+#define BM_00_37 BM_37_00
+#define BM_38_00 0x0000007fffffffff
+#define BM_00_38 BM_38_00
+#define BM_39_00 0x000000ffffffffff
+#define BM_00_39 BM_39_00
+#define BM_40_00 0x000001ffffffffff
+#define BM_00_40 BM_40_00
+#define BM_41_00 0x000003ffffffffff
+#define BM_00_41 BM_41_00
+#define BM_42_00 0x000007ffffffffff
+#define BM_00_42 BM_42_00
+#define BM_43_00 0x00000fffffffffff
+#define BM_00_43 BM_43_00
+#define BM_44_00 0x00001fffffffffff
+#define BM_00_44 BM_44_00
+#define BM_45_00 0x00003fffffffffff
+#define BM_00_45 BM_45_00
+#define BM_46_00 0x00007fffffffffff
+#define BM_00_46 BM_46_00
+#define BM_47_00 0x0000ffffffffffff
+#define BM_00_47 BM_47_00
+#define BM_48_00 0x0001ffffffffffff
+#define BM_00_48 BM_48_00
+#define BM_49_00 0x0003ffffffffffff
+#define BM_00_49 BM_49_00
+#define BM_50_00 0x0007ffffffffffff
+#define BM_00_50 BM_50_00
+#define BM_51_00 0x000fffffffffffff
+#define BM_00_51 BM_51_00
+#define BM_52_00 0x001fffffffffffff
+#define BM_00_52 BM_52_00
+#define BM_53_00 0x003fffffffffffff
+#define BM_00_53 BM_53_00
+#define BM_54_00 0x007fffffffffffff
+#define BM_00_54 BM_54_00
+#define BM_55_00 0x00ffffffffffffff
+#define BM_00_55 BM_55_00
+#define BM_56_00 0x01ffffffffffffff
+#define BM_00_56 BM_56_00
+#define BM_57_00 0x03ffffffffffffff
+#define BM_00_57 BM_57_00
+#define BM_58_00 0x07ffffffffffffff
+#define BM_00_58 BM_58_00
+#define BM_59_00 0x0fffffffffffffff
+#define BM_00_59 BM_59_00
+#define BM_60_00 0x1fffffffffffffff
+#define BM_00_60 BM_60_00
+#define BM_61_00 0x3fffffffffffffff
+#define BM_00_61 BM_61_00
+#define BM_62_00 0x7fffffffffffffff
+#define BM_00_62 BM_62_00
+#define BM_63_00 0xffffffffffffffff
+#define BM_00_63 BM_63_00
+#define BM_01_01 0x0000000000000002
+#define BM_02_01 0x0000000000000006
+#define BM_01_02 BM_02_01
+#define BM_03_01 0x000000000000000e
+#define BM_01_03 BM_03_01
+#define BM_04_01 0x000000000000001e
+#define BM_01_04 BM_04_01
+#define BM_05_01 0x000000000000003e
+#define BM_01_05 BM_05_01
+#define BM_06_01 0x000000000000007e
+#define BM_01_06 BM_06_01
+#define BM_07_01 0x00000000000000fe
+#define BM_01_07 BM_07_01
+#define BM_08_01 0x00000000000001fe
+#define BM_01_08 BM_08_01
+#define BM_09_01 0x00000000000003fe
+#define BM_01_09 BM_09_01
+#define BM_10_01 0x00000000000007fe
+#define BM_01_10 BM_10_01
+#define BM_11_01 0x0000000000000ffe
+#define BM_01_11 BM_11_01
+#define BM_12_01 0x0000000000001ffe
+#define BM_01_12 BM_12_01
+#define BM_13_01 0x0000000000003ffe
+#define BM_01_13 BM_13_01
+#define BM_14_01 0x0000000000007ffe
+#define BM_01_14 BM_14_01
+#define BM_15_01 0x000000000000fffe
+#define BM_01_15 BM_15_01
+#define BM_16_01 0x000000000001fffe
+#define BM_01_16 BM_16_01
+#define BM_17_01 0x000000000003fffe
+#define BM_01_17 BM_17_01
+#define BM_18_01 0x000000000007fffe
+#define BM_01_18 BM_18_01
+#define BM_19_01 0x00000000000ffffe
+#define BM_01_19 BM_19_01
+#define BM_20_01 0x00000000001ffffe
+#define BM_01_20 BM_20_01
+#define BM_21_01 0x00000000003ffffe
+#define BM_01_21 BM_21_01
+#define BM_22_01 0x00000000007ffffe
+#define BM_01_22 BM_22_01
+#define BM_23_01 0x0000000000fffffe
+#define BM_01_23 BM_23_01
+#define BM_24_01 0x0000000001fffffe
+#define BM_01_24 BM_24_01
+#define BM_25_01 0x0000000003fffffe
+#define BM_01_25 BM_25_01
+#define BM_26_01 0x0000000007fffffe
+#define BM_01_26 BM_26_01
+#define BM_27_01 0x000000000ffffffe
+#define BM_01_27 BM_27_01
+#define BM_28_01 0x000000001ffffffe
+#define BM_01_28 BM_28_01
+#define BM_29_01 0x000000003ffffffe
+#define BM_01_29 BM_29_01
+#define BM_30_01 0x000000007ffffffe
+#define BM_01_30 BM_30_01
+#define BM_31_01 0x00000000fffffffe
+#define BM_01_31 BM_31_01
+#define BM_32_01 0x00000001fffffffe
+#define BM_01_32 BM_32_01
+#define BM_33_01 0x00000003fffffffe
+#define BM_01_33 BM_33_01
+#define BM_34_01 0x00000007fffffffe
+#define BM_01_34 BM_34_01
+#define BM_35_01 0x0000000ffffffffe
+#define BM_01_35 BM_35_01
+#define BM_36_01 0x0000001ffffffffe
+#define BM_01_36 BM_36_01
+#define BM_37_01 0x0000003ffffffffe
+#define BM_01_37 BM_37_01
+#define BM_38_01 0x0000007ffffffffe
+#define BM_01_38 BM_38_01
+#define BM_39_01 0x000000fffffffffe
+#define BM_01_39 BM_39_01
+#define BM_40_01 0x000001fffffffffe
+#define BM_01_40 BM_40_01
+#define BM_41_01 0x000003fffffffffe
+#define BM_01_41 BM_41_01
+#define BM_42_01 0x000007fffffffffe
+#define BM_01_42 BM_42_01
+#define BM_43_01 0x00000ffffffffffe
+#define BM_01_43 BM_43_01
+#define BM_44_01 0x00001ffffffffffe
+#define BM_01_44 BM_44_01
+#define BM_45_01 0x00003ffffffffffe
+#define BM_01_45 BM_45_01
+#define BM_46_01 0x00007ffffffffffe
+#define BM_01_46 BM_46_01
+#define BM_47_01 0x0000fffffffffffe
+#define BM_01_47 BM_47_01
+#define BM_48_01 0x0001fffffffffffe
+#define BM_01_48 BM_48_01
+#define BM_49_01 0x0003fffffffffffe
+#define BM_01_49 BM_49_01
+#define BM_50_01 0x0007fffffffffffe
+#define BM_01_50 BM_50_01
+#define BM_51_01 0x000ffffffffffffe
+#define BM_01_51 BM_51_01
+#define BM_52_01 0x001ffffffffffffe
+#define BM_01_52 BM_52_01
+#define BM_53_01 0x003ffffffffffffe
+#define BM_01_53 BM_53_01
+#define BM_54_01 0x007ffffffffffffe
+#define BM_01_54 BM_54_01
+#define BM_55_01 0x00fffffffffffffe
+#define BM_01_55 BM_55_01
+#define BM_56_01 0x01fffffffffffffe
+#define BM_01_56 BM_56_01
+#define BM_57_01 0x03fffffffffffffe
+#define BM_01_57 BM_57_01
+#define BM_58_01 0x07fffffffffffffe
+#define BM_01_58 BM_58_01
+#define BM_59_01 0x0ffffffffffffffe
+#define BM_01_59 BM_59_01
+#define BM_60_01 0x1ffffffffffffffe
+#define BM_01_60 BM_60_01
+#define BM_61_01 0x3ffffffffffffffe
+#define BM_01_61 BM_61_01
+#define BM_62_01 0x7ffffffffffffffe
+#define BM_01_62 BM_62_01
+#define BM_63_01 0xfffffffffffffffe
+#define BM_01_63 BM_63_01
+#define BM_02_02 0x0000000000000004
+#define BM_03_02 0x000000000000000c
+#define BM_02_03 BM_03_02
+#define BM_04_02 0x000000000000001c
+#define BM_02_04 BM_04_02
+#define BM_05_02 0x000000000000003c
+#define BM_02_05 BM_05_02
+#define BM_06_02 0x000000000000007c
+#define BM_02_06 BM_06_02
+#define BM_07_02 0x00000000000000fc
+#define BM_02_07 BM_07_02
+#define BM_08_02 0x00000000000001fc
+#define BM_02_08 BM_08_02
+#define BM_09_02 0x00000000000003fc
+#define BM_02_09 BM_09_02
+#define BM_10_02 0x00000000000007fc
+#define BM_02_10 BM_10_02
+#define BM_11_02 0x0000000000000ffc
+#define BM_02_11 BM_11_02
+#define BM_12_02 0x0000000000001ffc
+#define BM_02_12 BM_12_02
+#define BM_13_02 0x0000000000003ffc
+#define BM_02_13 BM_13_02
+#define BM_14_02 0x0000000000007ffc
+#define BM_02_14 BM_14_02
+#define BM_15_02 0x000000000000fffc
+#define BM_02_15 BM_15_02
+#define BM_16_02 0x000000000001fffc
+#define BM_02_16 BM_16_02
+#define BM_17_02 0x000000000003fffc
+#define BM_02_17 BM_17_02
+#define BM_18_02 0x000000000007fffc
+#define BM_02_18 BM_18_02
+#define BM_19_02 0x00000000000ffffc
+#define BM_02_19 BM_19_02
+#define BM_20_02 0x00000000001ffffc
+#define BM_02_20 BM_20_02
+#define BM_21_02 0x00000000003ffffc
+#define BM_02_21 BM_21_02
+#define BM_22_02 0x00000000007ffffc
+#define BM_02_22 BM_22_02
+#define BM_23_02 0x0000000000fffffc
+#define BM_02_23 BM_23_02
+#define BM_24_02 0x0000000001fffffc
+#define BM_02_24 BM_24_02
+#define BM_25_02 0x0000000003fffffc
+#define BM_02_25 BM_25_02
+#define BM_26_02 0x0000000007fffffc
+#define BM_02_26 BM_26_02
+#define BM_27_02 0x000000000ffffffc
+#define BM_02_27 BM_27_02
+#define BM_28_02 0x000000001ffffffc
+#define BM_02_28 BM_28_02
+#define BM_29_02 0x000000003ffffffc
+#define BM_02_29 BM_29_02
+#define BM_30_02 0x000000007ffffffc
+#define BM_02_30 BM_30_02
+#define BM_31_02 0x00000000fffffffc
+#define BM_02_31 BM_31_02
+#define BM_32_02 0x00000001fffffffc
+#define BM_02_32 BM_32_02
+#define BM_33_02 0x00000003fffffffc
+#define BM_02_33 BM_33_02
+#define BM_34_02 0x00000007fffffffc
+#define BM_02_34 BM_34_02
+#define BM_35_02 0x0000000ffffffffc
+#define BM_02_35 BM_35_02
+#define BM_36_02 0x0000001ffffffffc
+#define BM_02_36 BM_36_02
+#define BM_37_02 0x0000003ffffffffc
+#define BM_02_37 BM_37_02
+#define BM_38_02 0x0000007ffffffffc
+#define BM_02_38 BM_38_02
+#define BM_39_02 0x000000fffffffffc
+#define BM_02_39 BM_39_02
+#define BM_40_02 0x000001fffffffffc
+#define BM_02_40 BM_40_02
+#define BM_41_02 0x000003fffffffffc
+#define BM_02_41 BM_41_02
+#define BM_42_02 0x000007fffffffffc
+#define BM_02_42 BM_42_02
+#define BM_43_02 0x00000ffffffffffc
+#define BM_02_43 BM_43_02
+#define BM_44_02 0x00001ffffffffffc
+#define BM_02_44 BM_44_02
+#define BM_45_02 0x00003ffffffffffc
+#define BM_02_45 BM_45_02
+#define BM_46_02 0x00007ffffffffffc
+#define BM_02_46 BM_46_02
+#define BM_47_02 0x0000fffffffffffc
+#define BM_02_47 BM_47_02
+#define BM_48_02 0x0001fffffffffffc
+#define BM_02_48 BM_48_02
+#define BM_49_02 0x0003fffffffffffc
+#define BM_02_49 BM_49_02
+#define BM_50_02 0x0007fffffffffffc
+#define BM_02_50 BM_50_02
+#define BM_51_02 0x000ffffffffffffc
+#define BM_02_51 BM_51_02
+#define BM_52_02 0x001ffffffffffffc
+#define BM_02_52 BM_52_02
+#define BM_53_02 0x003ffffffffffffc
+#define BM_02_53 BM_53_02
+#define BM_54_02 0x007ffffffffffffc
+#define BM_02_54 BM_54_02
+#define BM_55_02 0x00fffffffffffffc
+#define BM_02_55 BM_55_02
+#define BM_56_02 0x01fffffffffffffc
+#define BM_02_56 BM_56_02
+#define BM_57_02 0x03fffffffffffffc
+#define BM_02_57 BM_57_02
+#define BM_58_02 0x07fffffffffffffc
+#define BM_02_58 BM_58_02
+#define BM_59_02 0x0ffffffffffffffc
+#define BM_02_59 BM_59_02
+#define BM_60_02 0x1ffffffffffffffc
+#define BM_02_60 BM_60_02
+#define BM_61_02 0x3ffffffffffffffc
+#define BM_02_61 BM_61_02
+#define BM_62_02 0x7ffffffffffffffc
+#define BM_02_62 BM_62_02
+#define BM_63_02 0xfffffffffffffffc
+#define BM_02_63 BM_63_02
+#define BM_03_03 0x0000000000000008
+#define BM_04_03 0x0000000000000018
+#define BM_03_04 BM_04_03
+#define BM_05_03 0x0000000000000038
+#define BM_03_05 BM_05_03
+#define BM_06_03 0x0000000000000078
+#define BM_03_06 BM_06_03
+#define BM_07_03 0x00000000000000f8
+#define BM_03_07 BM_07_03
+#define BM_08_03 0x00000000000001f8
+#define BM_03_08 BM_08_03
+#define BM_09_03 0x00000000000003f8
+#define BM_03_09 BM_09_03
+#define BM_10_03 0x00000000000007f8
+#define BM_03_10 BM_10_03
+#define BM_11_03 0x0000000000000ff8
+#define BM_03_11 BM_11_03
+#define BM_12_03 0x0000000000001ff8
+#define BM_03_12 BM_12_03
+#define BM_13_03 0x0000000000003ff8
+#define BM_03_13 BM_13_03
+#define BM_14_03 0x0000000000007ff8
+#define BM_03_14 BM_14_03
+#define BM_15_03 0x000000000000fff8
+#define BM_03_15 BM_15_03
+#define BM_16_03 0x000000000001fff8
+#define BM_03_16 BM_16_03
+#define BM_17_03 0x000000000003fff8
+#define BM_03_17 BM_17_03
+#define BM_18_03 0x000000000007fff8
+#define BM_03_18 BM_18_03
+#define BM_19_03 0x00000000000ffff8
+#define BM_03_19 BM_19_03
+#define BM_20_03 0x00000000001ffff8
+#define BM_03_20 BM_20_03
+#define BM_21_03 0x00000000003ffff8
+#define BM_03_21 BM_21_03
+#define BM_22_03 0x00000000007ffff8
+#define BM_03_22 BM_22_03
+#define BM_23_03 0x0000000000fffff8
+#define BM_03_23 BM_23_03
+#define BM_24_03 0x0000000001fffff8
+#define BM_03_24 BM_24_03
+#define BM_25_03 0x0000000003fffff8
+#define BM_03_25 BM_25_03
+#define BM_26_03 0x0000000007fffff8
+#define BM_03_26 BM_26_03
+#define BM_27_03 0x000000000ffffff8
+#define BM_03_27 BM_27_03
+#define BM_28_03 0x000000001ffffff8
+#define BM_03_28 BM_28_03
+#define BM_29_03 0x000000003ffffff8
+#define BM_03_29 BM_29_03
+#define BM_30_03 0x000000007ffffff8
+#define BM_03_30 BM_30_03
+#define BM_31_03 0x00000000fffffff8
+#define BM_03_31 BM_31_03
+#define BM_32_03 0x00000001fffffff8
+#define BM_03_32 BM_32_03
+#define BM_33_03 0x00000003fffffff8
+#define BM_03_33 BM_33_03
+#define BM_34_03 0x00000007fffffff8
+#define BM_03_34 BM_34_03
+#define BM_35_03 0x0000000ffffffff8
+#define BM_03_35 BM_35_03
+#define BM_36_03 0x0000001ffffffff8
+#define BM_03_36 BM_36_03
+#define BM_37_03 0x0000003ffffffff8
+#define BM_03_37 BM_37_03
+#define BM_38_03 0x0000007ffffffff8
+#define BM_03_38 BM_38_03
+#define BM_39_03 0x000000fffffffff8
+#define BM_03_39 BM_39_03
+#define BM_40_03 0x000001fffffffff8
+#define BM_03_40 BM_40_03
+#define BM_41_03 0x000003fffffffff8
+#define BM_03_41 BM_41_03
+#define BM_42_03 0x000007fffffffff8
+#define BM_03_42 BM_42_03
+#define BM_43_03 0x00000ffffffffff8
+#define BM_03_43 BM_43_03
+#define BM_44_03 0x00001ffffffffff8
+#define BM_03_44 BM_44_03
+#define BM_45_03 0x00003ffffffffff8
+#define BM_03_45 BM_45_03
+#define BM_46_03 0x00007ffffffffff8
+#define BM_03_46 BM_46_03
+#define BM_47_03 0x0000fffffffffff8
+#define BM_03_47 BM_47_03
+#define BM_48_03 0x0001fffffffffff8
+#define BM_03_48 BM_48_03
+#define BM_49_03 0x0003fffffffffff8
+#define BM_03_49 BM_49_03
+#define BM_50_03 0x0007fffffffffff8
+#define BM_03_50 BM_50_03
+#define BM_51_03 0x000ffffffffffff8
+#define BM_03_51 BM_51_03
+#define BM_52_03 0x001ffffffffffff8
+#define BM_03_52 BM_52_03
+#define BM_53_03 0x003ffffffffffff8
+#define BM_03_53 BM_53_03
+#define BM_54_03 0x007ffffffffffff8
+#define BM_03_54 BM_54_03
+#define BM_55_03 0x00fffffffffffff8
+#define BM_03_55 BM_55_03
+#define BM_56_03 0x01fffffffffffff8
+#define BM_03_56 BM_56_03
+#define BM_57_03 0x03fffffffffffff8
+#define BM_03_57 BM_57_03
+#define BM_58_03 0x07fffffffffffff8
+#define BM_03_58 BM_58_03
+#define BM_59_03 0x0ffffffffffffff8
+#define BM_03_59 BM_59_03
+#define BM_60_03 0x1ffffffffffffff8
+#define BM_03_60 BM_60_03
+#define BM_61_03 0x3ffffffffffffff8
+#define BM_03_61 BM_61_03
+#define BM_62_03 0x7ffffffffffffff8
+#define BM_03_62 BM_62_03
+#define BM_63_03 0xfffffffffffffff8
+#define BM_03_63 BM_63_03
+#define BM_04_04 0x0000000000000010
+#define BM_05_04 0x0000000000000030
+#define BM_04_05 BM_05_04
+#define BM_06_04 0x0000000000000070
+#define BM_04_06 BM_06_04
+#define BM_07_04 0x00000000000000f0
+#define BM_04_07 BM_07_04
+#define BM_08_04 0x00000000000001f0
+#define BM_04_08 BM_08_04
+#define BM_09_04 0x00000000000003f0
+#define BM_04_09 BM_09_04
+#define BM_10_04 0x00000000000007f0
+#define BM_04_10 BM_10_04
+#define BM_11_04 0x0000000000000ff0
+#define BM_04_11 BM_11_04
+#define BM_12_04 0x0000000000001ff0
+#define BM_04_12 BM_12_04
+#define BM_13_04 0x0000000000003ff0
+#define BM_04_13 BM_13_04
+#define BM_14_04 0x0000000000007ff0
+#define BM_04_14 BM_14_04
+#define BM_15_04 0x000000000000fff0
+#define BM_04_15 BM_15_04
+#define BM_16_04 0x000000000001fff0
+#define BM_04_16 BM_16_04
+#define BM_17_04 0x000000000003fff0
+#define BM_04_17 BM_17_04
+#define BM_18_04 0x000000000007fff0
+#define BM_04_18 BM_18_04
+#define BM_19_04 0x00000000000ffff0
+#define BM_04_19 BM_19_04
+#define BM_20_04 0x00000000001ffff0
+#define BM_04_20 BM_20_04
+#define BM_21_04 0x00000000003ffff0
+#define BM_04_21 BM_21_04
+#define BM_22_04 0x00000000007ffff0
+#define BM_04_22 BM_22_04
+#define BM_23_04 0x0000000000fffff0
+#define BM_04_23 BM_23_04
+#define BM_24_04 0x0000000001fffff0
+#define BM_04_24 BM_24_04
+#define BM_25_04 0x0000000003fffff0
+#define BM_04_25 BM_25_04
+#define BM_26_04 0x0000000007fffff0
+#define BM_04_26 BM_26_04
+#define BM_27_04 0x000000000ffffff0
+#define BM_04_27 BM_27_04
+#define BM_28_04 0x000000001ffffff0
+#define BM_04_28 BM_28_04
+#define BM_29_04 0x000000003ffffff0
+#define BM_04_29 BM_29_04
+#define BM_30_04 0x000000007ffffff0
+#define BM_04_30 BM_30_04
+#define BM_31_04 0x00000000fffffff0
+#define BM_04_31 BM_31_04
+#define BM_32_04 0x00000001fffffff0
+#define BM_04_32 BM_32_04
+#define BM_33_04 0x00000003fffffff0
+#define BM_04_33 BM_33_04
+#define BM_34_04 0x00000007fffffff0
+#define BM_04_34 BM_34_04
+#define BM_35_04 0x0000000ffffffff0
+#define BM_04_35 BM_35_04
+#define BM_36_04 0x0000001ffffffff0
+#define BM_04_36 BM_36_04
+#define BM_37_04 0x0000003ffffffff0
+#define BM_04_37 BM_37_04
+#define BM_38_04 0x0000007ffffffff0
+#define BM_04_38 BM_38_04
+#define BM_39_04 0x000000fffffffff0
+#define BM_04_39 BM_39_04
+#define BM_40_04 0x000001fffffffff0
+#define BM_04_40 BM_40_04
+#define BM_41_04 0x000003fffffffff0
+#define BM_04_41 BM_41_04
+#define BM_42_04 0x000007fffffffff0
+#define BM_04_42 BM_42_04
+#define BM_43_04 0x00000ffffffffff0
+#define BM_04_43 BM_43_04
+#define BM_44_04 0x00001ffffffffff0
+#define BM_04_44 BM_44_04
+#define BM_45_04 0x00003ffffffffff0
+#define BM_04_45 BM_45_04
+#define BM_46_04 0x00007ffffffffff0
+#define BM_04_46 BM_46_04
+#define BM_47_04 0x0000fffffffffff0
+#define BM_04_47 BM_47_04
+#define BM_48_04 0x0001fffffffffff0
+#define BM_04_48 BM_48_04
+#define BM_49_04 0x0003fffffffffff0
+#define BM_04_49 BM_49_04
+#define BM_50_04 0x0007fffffffffff0
+#define BM_04_50 BM_50_04
+#define BM_51_04 0x000ffffffffffff0
+#define BM_04_51 BM_51_04
+#define BM_52_04 0x001ffffffffffff0
+#define BM_04_52 BM_52_04
+#define BM_53_04 0x003ffffffffffff0
+#define BM_04_53 BM_53_04
+#define BM_54_04 0x007ffffffffffff0
+#define BM_04_54 BM_54_04
+#define BM_55_04 0x00fffffffffffff0
+#define BM_04_55 BM_55_04
+#define BM_56_04 0x01fffffffffffff0
+#define BM_04_56 BM_56_04
+#define BM_57_04 0x03fffffffffffff0
+#define BM_04_57 BM_57_04
+#define BM_58_04 0x07fffffffffffff0
+#define BM_04_58 BM_58_04
+#define BM_59_04 0x0ffffffffffffff0
+#define BM_04_59 BM_59_04
+#define BM_60_04 0x1ffffffffffffff0
+#define BM_04_60 BM_60_04
+#define BM_61_04 0x3ffffffffffffff0
+#define BM_04_61 BM_61_04
+#define BM_62_04 0x7ffffffffffffff0
+#define BM_04_62 BM_62_04
+#define BM_63_04 0xfffffffffffffff0
+#define BM_04_63 BM_63_04
+#define BM_05_05 0x0000000000000020
+#define BM_06_05 0x0000000000000060
+#define BM_05_06 BM_06_05
+#define BM_07_05 0x00000000000000e0
+#define BM_05_07 BM_07_05
+#define BM_08_05 0x00000000000001e0
+#define BM_05_08 BM_08_05
+#define BM_09_05 0x00000000000003e0
+#define BM_05_09 BM_09_05
+#define BM_10_05 0x00000000000007e0
+#define BM_05_10 BM_10_05
+#define BM_11_05 0x0000000000000fe0
+#define BM_05_11 BM_11_05
+#define BM_12_05 0x0000000000001fe0
+#define BM_05_12 BM_12_05
+#define BM_13_05 0x0000000000003fe0
+#define BM_05_13 BM_13_05
+#define BM_14_05 0x0000000000007fe0
+#define BM_05_14 BM_14_05
+#define BM_15_05 0x000000000000ffe0
+#define BM_05_15 BM_15_05
+#define BM_16_05 0x000000000001ffe0
+#define BM_05_16 BM_16_05
+#define BM_17_05 0x000000000003ffe0
+#define BM_05_17 BM_17_05
+#define BM_18_05 0x000000000007ffe0
+#define BM_05_18 BM_18_05
+#define BM_19_05 0x00000000000fffe0
+#define BM_05_19 BM_19_05
+#define BM_20_05 0x00000000001fffe0
+#define BM_05_20 BM_20_05
+#define BM_21_05 0x00000000003fffe0
+#define BM_05_21 BM_21_05
+#define BM_22_05 0x00000000007fffe0
+#define BM_05_22 BM_22_05
+#define BM_23_05 0x0000000000ffffe0
+#define BM_05_23 BM_23_05
+#define BM_24_05 0x0000000001ffffe0
+#define BM_05_24 BM_24_05
+#define BM_25_05 0x0000000003ffffe0
+#define BM_05_25 BM_25_05
+#define BM_26_05 0x0000000007ffffe0
+#define BM_05_26 BM_26_05
+#define BM_27_05 0x000000000fffffe0
+#define BM_05_27 BM_27_05
+#define BM_28_05 0x000000001fffffe0
+#define BM_05_28 BM_28_05
+#define BM_29_05 0x000000003fffffe0
+#define BM_05_29 BM_29_05
+#define BM_30_05 0x000000007fffffe0
+#define BM_05_30 BM_30_05
+#define BM_31_05 0x00000000ffffffe0
+#define BM_05_31 BM_31_05
+#define BM_32_05 0x00000001ffffffe0
+#define BM_05_32 BM_32_05
+#define BM_33_05 0x00000003ffffffe0
+#define BM_05_33 BM_33_05
+#define BM_34_05 0x00000007ffffffe0
+#define BM_05_34 BM_34_05
+#define BM_35_05 0x0000000fffffffe0
+#define BM_05_35 BM_35_05
+#define BM_36_05 0x0000001fffffffe0
+#define BM_05_36 BM_36_05
+#define BM_37_05 0x0000003fffffffe0
+#define BM_05_37 BM_37_05
+#define BM_38_05 0x0000007fffffffe0
+#define BM_05_38 BM_38_05
+#define BM_39_05 0x000000ffffffffe0
+#define BM_05_39 BM_39_05
+#define BM_40_05 0x000001ffffffffe0
+#define BM_05_40 BM_40_05
+#define BM_41_05 0x000003ffffffffe0
+#define BM_05_41 BM_41_05
+#define BM_42_05 0x000007ffffffffe0
+#define BM_05_42 BM_42_05
+#define BM_43_05 0x00000fffffffffe0
+#define BM_05_43 BM_43_05
+#define BM_44_05 0x00001fffffffffe0
+#define BM_05_44 BM_44_05
+#define BM_45_05 0x00003fffffffffe0
+#define BM_05_45 BM_45_05
+#define BM_46_05 0x00007fffffffffe0
+#define BM_05_46 BM_46_05
+#define BM_47_05 0x0000ffffffffffe0
+#define BM_05_47 BM_47_05
+#define BM_48_05 0x0001ffffffffffe0
+#define BM_05_48 BM_48_05
+#define BM_49_05 0x0003ffffffffffe0
+#define BM_05_49 BM_49_05
+#define BM_50_05 0x0007ffffffffffe0
+#define BM_05_50 BM_50_05
+#define BM_51_05 0x000fffffffffffe0
+#define BM_05_51 BM_51_05
+#define BM_52_05 0x001fffffffffffe0
+#define BM_05_52 BM_52_05
+#define BM_53_05 0x003fffffffffffe0
+#define BM_05_53 BM_53_05
+#define BM_54_05 0x007fffffffffffe0
+#define BM_05_54 BM_54_05
+#define BM_55_05 0x00ffffffffffffe0
+#define BM_05_55 BM_55_05
+#define BM_56_05 0x01ffffffffffffe0
+#define BM_05_56 BM_56_05
+#define BM_57_05 0x03ffffffffffffe0
+#define BM_05_57 BM_57_05
+#define BM_58_05 0x07ffffffffffffe0
+#define BM_05_58 BM_58_05
+#define BM_59_05 0x0fffffffffffffe0
+#define BM_05_59 BM_59_05
+#define BM_60_05 0x1fffffffffffffe0
+#define BM_05_60 BM_60_05
+#define BM_61_05 0x3fffffffffffffe0
+#define BM_05_61 BM_61_05
+#define BM_62_05 0x7fffffffffffffe0
+#define BM_05_62 BM_62_05
+#define BM_63_05 0xffffffffffffffe0
+#define BM_05_63 BM_63_05
+#define BM_06_06 0x0000000000000040
+#define BM_07_06 0x00000000000000c0
+#define BM_06_07 BM_07_06
+#define BM_08_06 0x00000000000001c0
+#define BM_06_08 BM_08_06
+#define BM_09_06 0x00000000000003c0
+#define BM_06_09 BM_09_06
+#define BM_10_06 0x00000000000007c0
+#define BM_06_10 BM_10_06
+#define BM_11_06 0x0000000000000fc0
+#define BM_06_11 BM_11_06
+#define BM_12_06 0x0000000000001fc0
+#define BM_06_12 BM_12_06
+#define BM_13_06 0x0000000000003fc0
+#define BM_06_13 BM_13_06
+#define BM_14_06 0x0000000000007fc0
+#define BM_06_14 BM_14_06
+#define BM_15_06 0x000000000000ffc0
+#define BM_06_15 BM_15_06
+#define BM_16_06 0x000000000001ffc0
+#define BM_06_16 BM_16_06
+#define BM_17_06 0x000000000003ffc0
+#define BM_06_17 BM_17_06
+#define BM_18_06 0x000000000007ffc0
+#define BM_06_18 BM_18_06
+#define BM_19_06 0x00000000000fffc0
+#define BM_06_19 BM_19_06
+#define BM_20_06 0x00000000001fffc0
+#define BM_06_20 BM_20_06
+#define BM_21_06 0x00000000003fffc0
+#define BM_06_21 BM_21_06
+#define BM_22_06 0x00000000007fffc0
+#define BM_06_22 BM_22_06
+#define BM_23_06 0x0000000000ffffc0
+#define BM_06_23 BM_23_06
+#define BM_24_06 0x0000000001ffffc0
+#define BM_06_24 BM_24_06
+#define BM_25_06 0x0000000003ffffc0
+#define BM_06_25 BM_25_06
+#define BM_26_06 0x0000000007ffffc0
+#define BM_06_26 BM_26_06
+#define BM_27_06 0x000000000fffffc0
+#define BM_06_27 BM_27_06
+#define BM_28_06 0x000000001fffffc0
+#define BM_06_28 BM_28_06
+#define BM_29_06 0x000000003fffffc0
+#define BM_06_29 BM_29_06
+#define BM_30_06 0x000000007fffffc0
+#define BM_06_30 BM_30_06
+#define BM_31_06 0x00000000ffffffc0
+#define BM_06_31 BM_31_06
+#define BM_32_06 0x00000001ffffffc0
+#define BM_06_32 BM_32_06
+#define BM_33_06 0x00000003ffffffc0
+#define BM_06_33 BM_33_06
+#define BM_34_06 0x00000007ffffffc0
+#define BM_06_34 BM_34_06
+#define BM_35_06 0x0000000fffffffc0
+#define BM_06_35 BM_35_06
+#define BM_36_06 0x0000001fffffffc0
+#define BM_06_36 BM_36_06
+#define BM_37_06 0x0000003fffffffc0
+#define BM_06_37 BM_37_06
+#define BM_38_06 0x0000007fffffffc0
+#define BM_06_38 BM_38_06
+#define BM_39_06 0x000000ffffffffc0
+#define BM_06_39 BM_39_06
+#define BM_40_06 0x000001ffffffffc0
+#define BM_06_40 BM_40_06
+#define BM_41_06 0x000003ffffffffc0
+#define BM_06_41 BM_41_06
+#define BM_42_06 0x000007ffffffffc0
+#define BM_06_42 BM_42_06
+#define BM_43_06 0x00000fffffffffc0
+#define BM_06_43 BM_43_06
+#define BM_44_06 0x00001fffffffffc0
+#define BM_06_44 BM_44_06
+#define BM_45_06 0x00003fffffffffc0
+#define BM_06_45 BM_45_06
+#define BM_46_06 0x00007fffffffffc0
+#define BM_06_46 BM_46_06
+#define BM_47_06 0x0000ffffffffffc0
+#define BM_06_47 BM_47_06
+#define BM_48_06 0x0001ffffffffffc0
+#define BM_06_48 BM_48_06
+#define BM_49_06 0x0003ffffffffffc0
+#define BM_06_49 BM_49_06
+#define BM_50_06 0x0007ffffffffffc0
+#define BM_06_50 BM_50_06
+#define BM_51_06 0x000fffffffffffc0
+#define BM_06_51 BM_51_06
+#define BM_52_06 0x001fffffffffffc0
+#define BM_06_52 BM_52_06
+#define BM_53_06 0x003fffffffffffc0
+#define BM_06_53 BM_53_06
+#define BM_54_06 0x007fffffffffffc0
+#define BM_06_54 BM_54_06
+#define BM_55_06 0x00ffffffffffffc0
+#define BM_06_55 BM_55_06
+#define BM_56_06 0x01ffffffffffffc0
+#define BM_06_56 BM_56_06
+#define BM_57_06 0x03ffffffffffffc0
+#define BM_06_57 BM_57_06
+#define BM_58_06 0x07ffffffffffffc0
+#define BM_06_58 BM_58_06
+#define BM_59_06 0x0fffffffffffffc0
+#define BM_06_59 BM_59_06
+#define BM_60_06 0x1fffffffffffffc0
+#define BM_06_60 BM_60_06
+#define BM_61_06 0x3fffffffffffffc0
+#define BM_06_61 BM_61_06
+#define BM_62_06 0x7fffffffffffffc0
+#define BM_06_62 BM_62_06
+#define BM_63_06 0xffffffffffffffc0
+#define BM_06_63 BM_63_06
+#define BM_07_07 0x0000000000000080
+#define BM_08_07 0x0000000000000180
+#define BM_07_08 BM_08_07
+#define BM_09_07 0x0000000000000380
+#define BM_07_09 BM_09_07
+#define BM_10_07 0x0000000000000780
+#define BM_07_10 BM_10_07
+#define BM_11_07 0x0000000000000f80
+#define BM_07_11 BM_11_07
+#define BM_12_07 0x0000000000001f80
+#define BM_07_12 BM_12_07
+#define BM_13_07 0x0000000000003f80
+#define BM_07_13 BM_13_07
+#define BM_14_07 0x0000000000007f80
+#define BM_07_14 BM_14_07
+#define BM_15_07 0x000000000000ff80
+#define BM_07_15 BM_15_07
+#define BM_16_07 0x000000000001ff80
+#define BM_07_16 BM_16_07
+#define BM_17_07 0x000000000003ff80
+#define BM_07_17 BM_17_07
+#define BM_18_07 0x000000000007ff80
+#define BM_07_18 BM_18_07
+#define BM_19_07 0x00000000000fff80
+#define BM_07_19 BM_19_07
+#define BM_20_07 0x00000000001fff80
+#define BM_07_20 BM_20_07
+#define BM_21_07 0x00000000003fff80
+#define BM_07_21 BM_21_07
+#define BM_22_07 0x00000000007fff80
+#define BM_07_22 BM_22_07
+#define BM_23_07 0x0000000000ffff80
+#define BM_07_23 BM_23_07
+#define BM_24_07 0x0000000001ffff80
+#define BM_07_24 BM_24_07
+#define BM_25_07 0x0000000003ffff80
+#define BM_07_25 BM_25_07
+#define BM_26_07 0x0000000007ffff80
+#define BM_07_26 BM_26_07
+#define BM_27_07 0x000000000fffff80
+#define BM_07_27 BM_27_07
+#define BM_28_07 0x000000001fffff80
+#define BM_07_28 BM_28_07
+#define BM_29_07 0x000000003fffff80
+#define BM_07_29 BM_29_07
+#define BM_30_07 0x000000007fffff80
+#define BM_07_30 BM_30_07
+#define BM_31_07 0x00000000ffffff80
+#define BM_07_31 BM_31_07
+#define BM_32_07 0x00000001ffffff80
+#define BM_07_32 BM_32_07
+#define BM_33_07 0x00000003ffffff80
+#define BM_07_33 BM_33_07
+#define BM_34_07 0x00000007ffffff80
+#define BM_07_34 BM_34_07
+#define BM_35_07 0x0000000fffffff80
+#define BM_07_35 BM_35_07
+#define BM_36_07 0x0000001fffffff80
+#define BM_07_36 BM_36_07
+#define BM_37_07 0x0000003fffffff80
+#define BM_07_37 BM_37_07
+#define BM_38_07 0x0000007fffffff80
+#define BM_07_38 BM_38_07
+#define BM_39_07 0x000000ffffffff80
+#define BM_07_39 BM_39_07
+#define BM_40_07 0x000001ffffffff80
+#define BM_07_40 BM_40_07
+#define BM_41_07 0x000003ffffffff80
+#define BM_07_41 BM_41_07
+#define BM_42_07 0x000007ffffffff80
+#define BM_07_42 BM_42_07
+#define BM_43_07 0x00000fffffffff80
+#define BM_07_43 BM_43_07
+#define BM_44_07 0x00001fffffffff80
+#define BM_07_44 BM_44_07
+#define BM_45_07 0x00003fffffffff80
+#define BM_07_45 BM_45_07
+#define BM_46_07 0x00007fffffffff80
+#define BM_07_46 BM_46_07
+#define BM_47_07 0x0000ffffffffff80
+#define BM_07_47 BM_47_07
+#define BM_48_07 0x0001ffffffffff80
+#define BM_07_48 BM_48_07
+#define BM_49_07 0x0003ffffffffff80
+#define BM_07_49 BM_49_07
+#define BM_50_07 0x0007ffffffffff80
+#define BM_07_50 BM_50_07
+#define BM_51_07 0x000fffffffffff80
+#define BM_07_51 BM_51_07
+#define BM_52_07 0x001fffffffffff80
+#define BM_07_52 BM_52_07
+#define BM_53_07 0x003fffffffffff80
+#define BM_07_53 BM_53_07
+#define BM_54_07 0x007fffffffffff80
+#define BM_07_54 BM_54_07
+#define BM_55_07 0x00ffffffffffff80
+#define BM_07_55 BM_55_07
+#define BM_56_07 0x01ffffffffffff80
+#define BM_07_56 BM_56_07
+#define BM_57_07 0x03ffffffffffff80
+#define BM_07_57 BM_57_07
+#define BM_58_07 0x07ffffffffffff80
+#define BM_07_58 BM_58_07
+#define BM_59_07 0x0fffffffffffff80
+#define BM_07_59 BM_59_07
+#define BM_60_07 0x1fffffffffffff80
+#define BM_07_60 BM_60_07
+#define BM_61_07 0x3fffffffffffff80
+#define BM_07_61 BM_61_07
+#define BM_62_07 0x7fffffffffffff80
+#define BM_07_62 BM_62_07
+#define BM_63_07 0xffffffffffffff80
+#define BM_07_63 BM_63_07
+#define BM_08_08 0x0000000000000100
+#define BM_09_08 0x0000000000000300
+#define BM_08_09 BM_09_08
+#define BM_10_08 0x0000000000000700
+#define BM_08_10 BM_10_08
+#define BM_11_08 0x0000000000000f00
+#define BM_08_11 BM_11_08
+#define BM_12_08 0x0000000000001f00
+#define BM_08_12 BM_12_08
+#define BM_13_08 0x0000000000003f00
+#define BM_08_13 BM_13_08
+#define BM_14_08 0x0000000000007f00
+#define BM_08_14 BM_14_08
+#define BM_15_08 0x000000000000ff00
+#define BM_08_15 BM_15_08
+#define BM_16_08 0x000000000001ff00
+#define BM_08_16 BM_16_08
+#define BM_17_08 0x000000000003ff00
+#define BM_08_17 BM_17_08
+#define BM_18_08 0x000000000007ff00
+#define BM_08_18 BM_18_08
+#define BM_19_08 0x00000000000fff00
+#define BM_08_19 BM_19_08
+#define BM_20_08 0x00000000001fff00
+#define BM_08_20 BM_20_08
+#define BM_21_08 0x00000000003fff00
+#define BM_08_21 BM_21_08
+#define BM_22_08 0x00000000007fff00
+#define BM_08_22 BM_22_08
+#define BM_23_08 0x0000000000ffff00
+#define BM_08_23 BM_23_08
+#define BM_24_08 0x0000000001ffff00
+#define BM_08_24 BM_24_08
+#define BM_25_08 0x0000000003ffff00
+#define BM_08_25 BM_25_08
+#define BM_26_08 0x0000000007ffff00
+#define BM_08_26 BM_26_08
+#define BM_27_08 0x000000000fffff00
+#define BM_08_27 BM_27_08
+#define BM_28_08 0x000000001fffff00
+#define BM_08_28 BM_28_08
+#define BM_29_08 0x000000003fffff00
+#define BM_08_29 BM_29_08
+#define BM_30_08 0x000000007fffff00
+#define BM_08_30 BM_30_08
+#define BM_31_08 0x00000000ffffff00
+#define BM_08_31 BM_31_08
+#define BM_32_08 0x00000001ffffff00
+#define BM_08_32 BM_32_08
+#define BM_33_08 0x00000003ffffff00
+#define BM_08_33 BM_33_08
+#define BM_34_08 0x00000007ffffff00
+#define BM_08_34 BM_34_08
+#define BM_35_08 0x0000000fffffff00
+#define BM_08_35 BM_35_08
+#define BM_36_08 0x0000001fffffff00
+#define BM_08_36 BM_36_08
+#define BM_37_08 0x0000003fffffff00
+#define BM_08_37 BM_37_08
+#define BM_38_08 0x0000007fffffff00
+#define BM_08_38 BM_38_08
+#define BM_39_08 0x000000ffffffff00
+#define BM_08_39 BM_39_08
+#define BM_40_08 0x000001ffffffff00
+#define BM_08_40 BM_40_08
+#define BM_41_08 0x000003ffffffff00
+#define BM_08_41 BM_41_08
+#define BM_42_08 0x000007ffffffff00
+#define BM_08_42 BM_42_08
+#define BM_43_08 0x00000fffffffff00
+#define BM_08_43 BM_43_08
+#define BM_44_08 0x00001fffffffff00
+#define BM_08_44 BM_44_08
+#define BM_45_08 0x00003fffffffff00
+#define BM_08_45 BM_45_08
+#define BM_46_08 0x00007fffffffff00
+#define BM_08_46 BM_46_08
+#define BM_47_08 0x0000ffffffffff00
+#define BM_08_47 BM_47_08
+#define BM_48_08 0x0001ffffffffff00
+#define BM_08_48 BM_48_08
+#define BM_49_08 0x0003ffffffffff00
+#define BM_08_49 BM_49_08
+#define BM_50_08 0x0007ffffffffff00
+#define BM_08_50 BM_50_08
+#define BM_51_08 0x000fffffffffff00
+#define BM_08_51 BM_51_08
+#define BM_52_08 0x001fffffffffff00
+#define BM_08_52 BM_52_08
+#define BM_53_08 0x003fffffffffff00
+#define BM_08_53 BM_53_08
+#define BM_54_08 0x007fffffffffff00
+#define BM_08_54 BM_54_08
+#define BM_55_08 0x00ffffffffffff00
+#define BM_08_55 BM_55_08
+#define BM_56_08 0x01ffffffffffff00
+#define BM_08_56 BM_56_08
+#define BM_57_08 0x03ffffffffffff00
+#define BM_08_57 BM_57_08
+#define BM_58_08 0x07ffffffffffff00
+#define BM_08_58 BM_58_08
+#define BM_59_08 0x0fffffffffffff00
+#define BM_08_59 BM_59_08
+#define BM_60_08 0x1fffffffffffff00
+#define BM_08_60 BM_60_08
+#define BM_61_08 0x3fffffffffffff00
+#define BM_08_61 BM_61_08
+#define BM_62_08 0x7fffffffffffff00
+#define BM_08_62 BM_62_08
+#define BM_63_08 0xffffffffffffff00
+#define BM_08_63 BM_63_08
+#define BM_09_09 0x0000000000000200
+#define BM_10_09 0x0000000000000600
+#define BM_09_10 BM_10_09
+#define BM_11_09 0x0000000000000e00
+#define BM_09_11 BM_11_09
+#define BM_12_09 0x0000000000001e00
+#define BM_09_12 BM_12_09
+#define BM_13_09 0x0000000000003e00
+#define BM_09_13 BM_13_09
+#define BM_14_09 0x0000000000007e00
+#define BM_09_14 BM_14_09
+#define BM_15_09 0x000000000000fe00
+#define BM_09_15 BM_15_09
+#define BM_16_09 0x000000000001fe00
+#define BM_09_16 BM_16_09
+#define BM_17_09 0x000000000003fe00
+#define BM_09_17 BM_17_09
+#define BM_18_09 0x000000000007fe00
+#define BM_09_18 BM_18_09
+#define BM_19_09 0x00000000000ffe00
+#define BM_09_19 BM_19_09
+#define BM_20_09 0x00000000001ffe00
+#define BM_09_20 BM_20_09
+#define BM_21_09 0x00000000003ffe00
+#define BM_09_21 BM_21_09
+#define BM_22_09 0x00000000007ffe00
+#define BM_09_22 BM_22_09
+#define BM_23_09 0x0000000000fffe00
+#define BM_09_23 BM_23_09
+#define BM_24_09 0x0000000001fffe00
+#define BM_09_24 BM_24_09
+#define BM_25_09 0x0000000003fffe00
+#define BM_09_25 BM_25_09
+#define BM_26_09 0x0000000007fffe00
+#define BM_09_26 BM_26_09
+#define BM_27_09 0x000000000ffffe00
+#define BM_09_27 BM_27_09
+#define BM_28_09 0x000000001ffffe00
+#define BM_09_28 BM_28_09
+#define BM_29_09 0x000000003ffffe00
+#define BM_09_29 BM_29_09
+#define BM_30_09 0x000000007ffffe00
+#define BM_09_30 BM_30_09
+#define BM_31_09 0x00000000fffffe00
+#define BM_09_31 BM_31_09
+#define BM_32_09 0x00000001fffffe00
+#define BM_09_32 BM_32_09
+#define BM_33_09 0x00000003fffffe00
+#define BM_09_33 BM_33_09
+#define BM_34_09 0x00000007fffffe00
+#define BM_09_34 BM_34_09
+#define BM_35_09 0x0000000ffffffe00
+#define BM_09_35 BM_35_09
+#define BM_36_09 0x0000001ffffffe00
+#define BM_09_36 BM_36_09
+#define BM_37_09 0x0000003ffffffe00
+#define BM_09_37 BM_37_09
+#define BM_38_09 0x0000007ffffffe00
+#define BM_09_38 BM_38_09
+#define BM_39_09 0x000000fffffffe00
+#define BM_09_39 BM_39_09
+#define BM_40_09 0x000001fffffffe00
+#define BM_09_40 BM_40_09
+#define BM_41_09 0x000003fffffffe00
+#define BM_09_41 BM_41_09
+#define BM_42_09 0x000007fffffffe00
+#define BM_09_42 BM_42_09
+#define BM_43_09 0x00000ffffffffe00
+#define BM_09_43 BM_43_09
+#define BM_44_09 0x00001ffffffffe00
+#define BM_09_44 BM_44_09
+#define BM_45_09 0x00003ffffffffe00
+#define BM_09_45 BM_45_09
+#define BM_46_09 0x00007ffffffffe00
+#define BM_09_46 BM_46_09
+#define BM_47_09 0x0000fffffffffe00
+#define BM_09_47 BM_47_09
+#define BM_48_09 0x0001fffffffffe00
+#define BM_09_48 BM_48_09
+#define BM_49_09 0x0003fffffffffe00
+#define BM_09_49 BM_49_09
+#define BM_50_09 0x0007fffffffffe00
+#define BM_09_50 BM_50_09
+#define BM_51_09 0x000ffffffffffe00
+#define BM_09_51 BM_51_09
+#define BM_52_09 0x001ffffffffffe00
+#define BM_09_52 BM_52_09
+#define BM_53_09 0x003ffffffffffe00
+#define BM_09_53 BM_53_09
+#define BM_54_09 0x007ffffffffffe00
+#define BM_09_54 BM_54_09
+#define BM_55_09 0x00fffffffffffe00
+#define BM_09_55 BM_55_09
+#define BM_56_09 0x01fffffffffffe00
+#define BM_09_56 BM_56_09
+#define BM_57_09 0x03fffffffffffe00
+#define BM_09_57 BM_57_09
+#define BM_58_09 0x07fffffffffffe00
+#define BM_09_58 BM_58_09
+#define BM_59_09 0x0ffffffffffffe00
+#define BM_09_59 BM_59_09
+#define BM_60_09 0x1ffffffffffffe00
+#define BM_09_60 BM_60_09
+#define BM_61_09 0x3ffffffffffffe00
+#define BM_09_61 BM_61_09
+#define BM_62_09 0x7ffffffffffffe00
+#define BM_09_62 BM_62_09
+#define BM_63_09 0xfffffffffffffe00
+#define BM_09_63 BM_63_09
+#define BM_10_10 0x0000000000000400
+#define BM_11_10 0x0000000000000c00
+#define BM_10_11 BM_11_10
+#define BM_12_10 0x0000000000001c00
+#define BM_10_12 BM_12_10
+#define BM_13_10 0x0000000000003c00
+#define BM_10_13 BM_13_10
+#define BM_14_10 0x0000000000007c00
+#define BM_10_14 BM_14_10
+#define BM_15_10 0x000000000000fc00
+#define BM_10_15 BM_15_10
+#define BM_16_10 0x000000000001fc00
+#define BM_10_16 BM_16_10
+#define BM_17_10 0x000000000003fc00
+#define BM_10_17 BM_17_10
+#define BM_18_10 0x000000000007fc00
+#define BM_10_18 BM_18_10
+#define BM_19_10 0x00000000000ffc00
+#define BM_10_19 BM_19_10
+#define BM_20_10 0x00000000001ffc00
+#define BM_10_20 BM_20_10
+#define BM_21_10 0x00000000003ffc00
+#define BM_10_21 BM_21_10
+#define BM_22_10 0x00000000007ffc00
+#define BM_10_22 BM_22_10
+#define BM_23_10 0x0000000000fffc00
+#define BM_10_23 BM_23_10
+#define BM_24_10 0x0000000001fffc00
+#define BM_10_24 BM_24_10
+#define BM_25_10 0x0000000003fffc00
+#define BM_10_25 BM_25_10
+#define BM_26_10 0x0000000007fffc00
+#define BM_10_26 BM_26_10
+#define BM_27_10 0x000000000ffffc00
+#define BM_10_27 BM_27_10
+#define BM_28_10 0x000000001ffffc00
+#define BM_10_28 BM_28_10
+#define BM_29_10 0x000000003ffffc00
+#define BM_10_29 BM_29_10
+#define BM_30_10 0x000000007ffffc00
+#define BM_10_30 BM_30_10
+#define BM_31_10 0x00000000fffffc00
+#define BM_10_31 BM_31_10
+#define BM_32_10 0x00000001fffffc00
+#define BM_10_32 BM_32_10
+#define BM_33_10 0x00000003fffffc00
+#define BM_10_33 BM_33_10
+#define BM_34_10 0x00000007fffffc00
+#define BM_10_34 BM_34_10
+#define BM_35_10 0x0000000ffffffc00
+#define BM_10_35 BM_35_10
+#define BM_36_10 0x0000001ffffffc00
+#define BM_10_36 BM_36_10
+#define BM_37_10 0x0000003ffffffc00
+#define BM_10_37 BM_37_10
+#define BM_38_10 0x0000007ffffffc00
+#define BM_10_38 BM_38_10
+#define BM_39_10 0x000000fffffffc00
+#define BM_10_39 BM_39_10
+#define BM_40_10 0x000001fffffffc00
+#define BM_10_40 BM_40_10
+#define BM_41_10 0x000003fffffffc00
+#define BM_10_41 BM_41_10
+#define BM_42_10 0x000007fffffffc00
+#define BM_10_42 BM_42_10
+#define BM_43_10 0x00000ffffffffc00
+#define BM_10_43 BM_43_10
+#define BM_44_10 0x00001ffffffffc00
+#define BM_10_44 BM_44_10
+#define BM_45_10 0x00003ffffffffc00
+#define BM_10_45 BM_45_10
+#define BM_46_10 0x00007ffffffffc00
+#define BM_10_46 BM_46_10
+#define BM_47_10 0x0000fffffffffc00
+#define BM_10_47 BM_47_10
+#define BM_48_10 0x0001fffffffffc00
+#define BM_10_48 BM_48_10
+#define BM_49_10 0x0003fffffffffc00
+#define BM_10_49 BM_49_10
+#define BM_50_10 0x0007fffffffffc00
+#define BM_10_50 BM_50_10
+#define BM_51_10 0x000ffffffffffc00
+#define BM_10_51 BM_51_10
+#define BM_52_10 0x001ffffffffffc00
+#define BM_10_52 BM_52_10
+#define BM_53_10 0x003ffffffffffc00
+#define BM_10_53 BM_53_10
+#define BM_54_10 0x007ffffffffffc00
+#define BM_10_54 BM_54_10
+#define BM_55_10 0x00fffffffffffc00
+#define BM_10_55 BM_55_10
+#define BM_56_10 0x01fffffffffffc00
+#define BM_10_56 BM_56_10
+#define BM_57_10 0x03fffffffffffc00
+#define BM_10_57 BM_57_10
+#define BM_58_10 0x07fffffffffffc00
+#define BM_10_58 BM_58_10
+#define BM_59_10 0x0ffffffffffffc00
+#define BM_10_59 BM_59_10
+#define BM_60_10 0x1ffffffffffffc00
+#define BM_10_60 BM_60_10
+#define BM_61_10 0x3ffffffffffffc00
+#define BM_10_61 BM_61_10
+#define BM_62_10 0x7ffffffffffffc00
+#define BM_10_62 BM_62_10
+#define BM_63_10 0xfffffffffffffc00
+#define BM_10_63 BM_63_10
+#define BM_11_11 0x0000000000000800
+#define BM_12_11 0x0000000000001800
+#define BM_11_12 BM_12_11
+#define BM_13_11 0x0000000000003800
+#define BM_11_13 BM_13_11
+#define BM_14_11 0x0000000000007800
+#define BM_11_14 BM_14_11
+#define BM_15_11 0x000000000000f800
+#define BM_11_15 BM_15_11
+#define BM_16_11 0x000000000001f800
+#define BM_11_16 BM_16_11
+#define BM_17_11 0x000000000003f800
+#define BM_11_17 BM_17_11
+#define BM_18_11 0x000000000007f800
+#define BM_11_18 BM_18_11
+#define BM_19_11 0x00000000000ff800
+#define BM_11_19 BM_19_11
+#define BM_20_11 0x00000000001ff800
+#define BM_11_20 BM_20_11
+#define BM_21_11 0x00000000003ff800
+#define BM_11_21 BM_21_11
+#define BM_22_11 0x00000000007ff800
+#define BM_11_22 BM_22_11
+#define BM_23_11 0x0000000000fff800
+#define BM_11_23 BM_23_11
+#define BM_24_11 0x0000000001fff800
+#define BM_11_24 BM_24_11
+#define BM_25_11 0x0000000003fff800
+#define BM_11_25 BM_25_11
+#define BM_26_11 0x0000000007fff800
+#define BM_11_26 BM_26_11
+#define BM_27_11 0x000000000ffff800
+#define BM_11_27 BM_27_11
+#define BM_28_11 0x000000001ffff800
+#define BM_11_28 BM_28_11
+#define BM_29_11 0x000000003ffff800
+#define BM_11_29 BM_29_11
+#define BM_30_11 0x000000007ffff800
+#define BM_11_30 BM_30_11
+#define BM_31_11 0x00000000fffff800
+#define BM_11_31 BM_31_11
+#define BM_32_11 0x00000001fffff800
+#define BM_11_32 BM_32_11
+#define BM_33_11 0x00000003fffff800
+#define BM_11_33 BM_33_11
+#define BM_34_11 0x00000007fffff800
+#define BM_11_34 BM_34_11
+#define BM_35_11 0x0000000ffffff800
+#define BM_11_35 BM_35_11
+#define BM_36_11 0x0000001ffffff800
+#define BM_11_36 BM_36_11
+#define BM_37_11 0x0000003ffffff800
+#define BM_11_37 BM_37_11
+#define BM_38_11 0x0000007ffffff800
+#define BM_11_38 BM_38_11
+#define BM_39_11 0x000000fffffff800
+#define BM_11_39 BM_39_11
+#define BM_40_11 0x000001fffffff800
+#define BM_11_40 BM_40_11
+#define BM_41_11 0x000003fffffff800
+#define BM_11_41 BM_41_11
+#define BM_42_11 0x000007fffffff800
+#define BM_11_42 BM_42_11
+#define BM_43_11 0x00000ffffffff800
+#define BM_11_43 BM_43_11
+#define BM_44_11 0x00001ffffffff800
+#define BM_11_44 BM_44_11
+#define BM_45_11 0x00003ffffffff800
+#define BM_11_45 BM_45_11
+#define BM_46_11 0x00007ffffffff800
+#define BM_11_46 BM_46_11
+#define BM_47_11 0x0000fffffffff800
+#define BM_11_47 BM_47_11
+#define BM_48_11 0x0001fffffffff800
+#define BM_11_48 BM_48_11
+#define BM_49_11 0x0003fffffffff800
+#define BM_11_49 BM_49_11
+#define BM_50_11 0x0007fffffffff800
+#define BM_11_50 BM_50_11
+#define BM_51_11 0x000ffffffffff800
+#define BM_11_51 BM_51_11
+#define BM_52_11 0x001ffffffffff800
+#define BM_11_52 BM_52_11
+#define BM_53_11 0x003ffffffffff800
+#define BM_11_53 BM_53_11
+#define BM_54_11 0x007ffffffffff800
+#define BM_11_54 BM_54_11
+#define BM_55_11 0x00fffffffffff800
+#define BM_11_55 BM_55_11
+#define BM_56_11 0x01fffffffffff800
+#define BM_11_56 BM_56_11
+#define BM_57_11 0x03fffffffffff800
+#define BM_11_57 BM_57_11
+#define BM_58_11 0x07fffffffffff800
+#define BM_11_58 BM_58_11
+#define BM_59_11 0x0ffffffffffff800
+#define BM_11_59 BM_59_11
+#define BM_60_11 0x1ffffffffffff800
+#define BM_11_60 BM_60_11
+#define BM_61_11 0x3ffffffffffff800
+#define BM_11_61 BM_61_11
+#define BM_62_11 0x7ffffffffffff800
+#define BM_11_62 BM_62_11
+#define BM_63_11 0xfffffffffffff800
+#define BM_11_63 BM_63_11
+#define BM_12_12 0x0000000000001000
+#define BM_13_12 0x0000000000003000
+#define BM_12_13 BM_13_12
+#define BM_14_12 0x0000000000007000
+#define BM_12_14 BM_14_12
+#define BM_15_12 0x000000000000f000
+#define BM_12_15 BM_15_12
+#define BM_16_12 0x000000000001f000
+#define BM_12_16 BM_16_12
+#define BM_17_12 0x000000000003f000
+#define BM_12_17 BM_17_12
+#define BM_18_12 0x000000000007f000
+#define BM_12_18 BM_18_12
+#define BM_19_12 0x00000000000ff000
+#define BM_12_19 BM_19_12
+#define BM_20_12 0x00000000001ff000
+#define BM_12_20 BM_20_12
+#define BM_21_12 0x00000000003ff000
+#define BM_12_21 BM_21_12
+#define BM_22_12 0x00000000007ff000
+#define BM_12_22 BM_22_12
+#define BM_23_12 0x0000000000fff000
+#define BM_12_23 BM_23_12
+#define BM_24_12 0x0000000001fff000
+#define BM_12_24 BM_24_12
+#define BM_25_12 0x0000000003fff000
+#define BM_12_25 BM_25_12
+#define BM_26_12 0x0000000007fff000
+#define BM_12_26 BM_26_12
+#define BM_27_12 0x000000000ffff000
+#define BM_12_27 BM_27_12
+#define BM_28_12 0x000000001ffff000
+#define BM_12_28 BM_28_12
+#define BM_29_12 0x000000003ffff000
+#define BM_12_29 BM_29_12
+#define BM_30_12 0x000000007ffff000
+#define BM_12_30 BM_30_12
+#define BM_31_12 0x00000000fffff000
+#define BM_12_31 BM_31_12
+#define BM_32_12 0x00000001fffff000
+#define BM_12_32 BM_32_12
+#define BM_33_12 0x00000003fffff000
+#define BM_12_33 BM_33_12
+#define BM_34_12 0x00000007fffff000
+#define BM_12_34 BM_34_12
+#define BM_35_12 0x0000000ffffff000
+#define BM_12_35 BM_35_12
+#define BM_36_12 0x0000001ffffff000
+#define BM_12_36 BM_36_12
+#define BM_37_12 0x0000003ffffff000
+#define BM_12_37 BM_37_12
+#define BM_38_12 0x0000007ffffff000
+#define BM_12_38 BM_38_12
+#define BM_39_12 0x000000fffffff000
+#define BM_12_39 BM_39_12
+#define BM_40_12 0x000001fffffff000
+#define BM_12_40 BM_40_12
+#define BM_41_12 0x000003fffffff000
+#define BM_12_41 BM_41_12
+#define BM_42_12 0x000007fffffff000
+#define BM_12_42 BM_42_12
+#define BM_43_12 0x00000ffffffff000
+#define BM_12_43 BM_43_12
+#define BM_44_12 0x00001ffffffff000
+#define BM_12_44 BM_44_12
+#define BM_45_12 0x00003ffffffff000
+#define BM_12_45 BM_45_12
+#define BM_46_12 0x00007ffffffff000
+#define BM_12_46 BM_46_12
+#define BM_47_12 0x0000fffffffff000
+#define BM_12_47 BM_47_12
+#define BM_48_12 0x0001fffffffff000
+#define BM_12_48 BM_48_12
+#define BM_49_12 0x0003fffffffff000
+#define BM_12_49 BM_49_12
+#define BM_50_12 0x0007fffffffff000
+#define BM_12_50 BM_50_12
+#define BM_51_12 0x000ffffffffff000
+#define BM_12_51 BM_51_12
+#define BM_52_12 0x001ffffffffff000
+#define BM_12_52 BM_52_12
+#define BM_53_12 0x003ffffffffff000
+#define BM_12_53 BM_53_12
+#define BM_54_12 0x007ffffffffff000
+#define BM_12_54 BM_54_12
+#define BM_55_12 0x00fffffffffff000
+#define BM_12_55 BM_55_12
+#define BM_56_12 0x01fffffffffff000
+#define BM_12_56 BM_56_12
+#define BM_57_12 0x03fffffffffff000
+#define BM_12_57 BM_57_12
+#define BM_58_12 0x07fffffffffff000
+#define BM_12_58 BM_58_12
+#define BM_59_12 0x0ffffffffffff000
+#define BM_12_59 BM_59_12
+#define BM_60_12 0x1ffffffffffff000
+#define BM_12_60 BM_60_12
+#define BM_61_12 0x3ffffffffffff000
+#define BM_12_61 BM_61_12
+#define BM_62_12 0x7ffffffffffff000
+#define BM_12_62 BM_62_12
+#define BM_63_12 0xfffffffffffff000
+#define BM_12_63 BM_63_12
+#define BM_13_13 0x0000000000002000
+#define BM_14_13 0x0000000000006000
+#define BM_13_14 BM_14_13
+#define BM_15_13 0x000000000000e000
+#define BM_13_15 BM_15_13
+#define BM_16_13 0x000000000001e000
+#define BM_13_16 BM_16_13
+#define BM_17_13 0x000000000003e000
+#define BM_13_17 BM_17_13
+#define BM_18_13 0x000000000007e000
+#define BM_13_18 BM_18_13
+#define BM_19_13 0x00000000000fe000
+#define BM_13_19 BM_19_13
+#define BM_20_13 0x00000000001fe000
+#define BM_13_20 BM_20_13
+#define BM_21_13 0x00000000003fe000
+#define BM_13_21 BM_21_13
+#define BM_22_13 0x00000000007fe000
+#define BM_13_22 BM_22_13
+#define BM_23_13 0x0000000000ffe000
+#define BM_13_23 BM_23_13
+#define BM_24_13 0x0000000001ffe000
+#define BM_13_24 BM_24_13
+#define BM_25_13 0x0000000003ffe000
+#define BM_13_25 BM_25_13
+#define BM_26_13 0x0000000007ffe000
+#define BM_13_26 BM_26_13
+#define BM_27_13 0x000000000fffe000
+#define BM_13_27 BM_27_13
+#define BM_28_13 0x000000001fffe000
+#define BM_13_28 BM_28_13
+#define BM_29_13 0x000000003fffe000
+#define BM_13_29 BM_29_13
+#define BM_30_13 0x000000007fffe000
+#define BM_13_30 BM_30_13
+#define BM_31_13 0x00000000ffffe000
+#define BM_13_31 BM_31_13
+#define BM_32_13 0x00000001ffffe000
+#define BM_13_32 BM_32_13
+#define BM_33_13 0x00000003ffffe000
+#define BM_13_33 BM_33_13
+#define BM_34_13 0x00000007ffffe000
+#define BM_13_34 BM_34_13
+#define BM_35_13 0x0000000fffffe000
+#define BM_13_35 BM_35_13
+#define BM_36_13 0x0000001fffffe000
+#define BM_13_36 BM_36_13
+#define BM_37_13 0x0000003fffffe000
+#define BM_13_37 BM_37_13
+#define BM_38_13 0x0000007fffffe000
+#define BM_13_38 BM_38_13
+#define BM_39_13 0x000000ffffffe000
+#define BM_13_39 BM_39_13
+#define BM_40_13 0x000001ffffffe000
+#define BM_13_40 BM_40_13
+#define BM_41_13 0x000003ffffffe000
+#define BM_13_41 BM_41_13
+#define BM_42_13 0x000007ffffffe000
+#define BM_13_42 BM_42_13
+#define BM_43_13 0x00000fffffffe000
+#define BM_13_43 BM_43_13
+#define BM_44_13 0x00001fffffffe000
+#define BM_13_44 BM_44_13
+#define BM_45_13 0x00003fffffffe000
+#define BM_13_45 BM_45_13
+#define BM_46_13 0x00007fffffffe000
+#define BM_13_46 BM_46_13
+#define BM_47_13 0x0000ffffffffe000
+#define BM_13_47 BM_47_13
+#define BM_48_13 0x0001ffffffffe000
+#define BM_13_48 BM_48_13
+#define BM_49_13 0x0003ffffffffe000
+#define BM_13_49 BM_49_13
+#define BM_50_13 0x0007ffffffffe000
+#define BM_13_50 BM_50_13
+#define BM_51_13 0x000fffffffffe000
+#define BM_13_51 BM_51_13
+#define BM_52_13 0x001fffffffffe000
+#define BM_13_52 BM_52_13
+#define BM_53_13 0x003fffffffffe000
+#define BM_13_53 BM_53_13
+#define BM_54_13 0x007fffffffffe000
+#define BM_13_54 BM_54_13
+#define BM_55_13 0x00ffffffffffe000
+#define BM_13_55 BM_55_13
+#define BM_56_13 0x01ffffffffffe000
+#define BM_13_56 BM_56_13
+#define BM_57_13 0x03ffffffffffe000
+#define BM_13_57 BM_57_13
+#define BM_58_13 0x07ffffffffffe000
+#define BM_13_58 BM_58_13
+#define BM_59_13 0x0fffffffffffe000
+#define BM_13_59 BM_59_13
+#define BM_60_13 0x1fffffffffffe000
+#define BM_13_60 BM_60_13
+#define BM_61_13 0x3fffffffffffe000
+#define BM_13_61 BM_61_13
+#define BM_62_13 0x7fffffffffffe000
+#define BM_13_62 BM_62_13
+#define BM_63_13 0xffffffffffffe000
+#define BM_13_63 BM_63_13
+#define BM_14_14 0x0000000000004000
+#define BM_15_14 0x000000000000c000
+#define BM_14_15 BM_15_14
+#define BM_16_14 0x000000000001c000
+#define BM_14_16 BM_16_14
+#define BM_17_14 0x000000000003c000
+#define BM_14_17 BM_17_14
+#define BM_18_14 0x000000000007c000
+#define BM_14_18 BM_18_14
+#define BM_19_14 0x00000000000fc000
+#define BM_14_19 BM_19_14
+#define BM_20_14 0x00000000001fc000
+#define BM_14_20 BM_20_14
+#define BM_21_14 0x00000000003fc000
+#define BM_14_21 BM_21_14
+#define BM_22_14 0x00000000007fc000
+#define BM_14_22 BM_22_14
+#define BM_23_14 0x0000000000ffc000
+#define BM_14_23 BM_23_14
+#define BM_24_14 0x0000000001ffc000
+#define BM_14_24 BM_24_14
+#define BM_25_14 0x0000000003ffc000
+#define BM_14_25 BM_25_14
+#define BM_26_14 0x0000000007ffc000
+#define BM_14_26 BM_26_14
+#define BM_27_14 0x000000000fffc000
+#define BM_14_27 BM_27_14
+#define BM_28_14 0x000000001fffc000
+#define BM_14_28 BM_28_14
+#define BM_29_14 0x000000003fffc000
+#define BM_14_29 BM_29_14
+#define BM_30_14 0x000000007fffc000
+#define BM_14_30 BM_30_14
+#define BM_31_14 0x00000000ffffc000
+#define BM_14_31 BM_31_14
+#define BM_32_14 0x00000001ffffc000
+#define BM_14_32 BM_32_14
+#define BM_33_14 0x00000003ffffc000
+#define BM_14_33 BM_33_14
+#define BM_34_14 0x00000007ffffc000
+#define BM_14_34 BM_34_14
+#define BM_35_14 0x0000000fffffc000
+#define BM_14_35 BM_35_14
+#define BM_36_14 0x0000001fffffc000
+#define BM_14_36 BM_36_14
+#define BM_37_14 0x0000003fffffc000
+#define BM_14_37 BM_37_14
+#define BM_38_14 0x0000007fffffc000
+#define BM_14_38 BM_38_14
+#define BM_39_14 0x000000ffffffc000
+#define BM_14_39 BM_39_14
+#define BM_40_14 0x000001ffffffc000
+#define BM_14_40 BM_40_14
+#define BM_41_14 0x000003ffffffc000
+#define BM_14_41 BM_41_14
+#define BM_42_14 0x000007ffffffc000
+#define BM_14_42 BM_42_14
+#define BM_43_14 0x00000fffffffc000
+#define BM_14_43 BM_43_14
+#define BM_44_14 0x00001fffffffc000
+#define BM_14_44 BM_44_14
+#define BM_45_14 0x00003fffffffc000
+#define BM_14_45 BM_45_14
+#define BM_46_14 0x00007fffffffc000
+#define BM_14_46 BM_46_14
+#define BM_47_14 0x0000ffffffffc000
+#define BM_14_47 BM_47_14
+#define BM_48_14 0x0001ffffffffc000
+#define BM_14_48 BM_48_14
+#define BM_49_14 0x0003ffffffffc000
+#define BM_14_49 BM_49_14
+#define BM_50_14 0x0007ffffffffc000
+#define BM_14_50 BM_50_14
+#define BM_51_14 0x000fffffffffc000
+#define BM_14_51 BM_51_14
+#define BM_52_14 0x001fffffffffc000
+#define BM_14_52 BM_52_14
+#define BM_53_14 0x003fffffffffc000
+#define BM_14_53 BM_53_14
+#define BM_54_14 0x007fffffffffc000
+#define BM_14_54 BM_54_14
+#define BM_55_14 0x00ffffffffffc000
+#define BM_14_55 BM_55_14
+#define BM_56_14 0x01ffffffffffc000
+#define BM_14_56 BM_56_14
+#define BM_57_14 0x03ffffffffffc000
+#define BM_14_57 BM_57_14
+#define BM_58_14 0x07ffffffffffc000
+#define BM_14_58 BM_58_14
+#define BM_59_14 0x0fffffffffffc000
+#define BM_14_59 BM_59_14
+#define BM_60_14 0x1fffffffffffc000
+#define BM_14_60 BM_60_14
+#define BM_61_14 0x3fffffffffffc000
+#define BM_14_61 BM_61_14
+#define BM_62_14 0x7fffffffffffc000
+#define BM_14_62 BM_62_14
+#define BM_63_14 0xffffffffffffc000
+#define BM_14_63 BM_63_14
+#define BM_15_15 0x0000000000008000
+#define BM_16_15 0x0000000000018000
+#define BM_15_16 BM_16_15
+#define BM_17_15 0x0000000000038000
+#define BM_15_17 BM_17_15
+#define BM_18_15 0x0000000000078000
+#define BM_15_18 BM_18_15
+#define BM_19_15 0x00000000000f8000
+#define BM_15_19 BM_19_15
+#define BM_20_15 0x00000000001f8000
+#define BM_15_20 BM_20_15
+#define BM_21_15 0x00000000003f8000
+#define BM_15_21 BM_21_15
+#define BM_22_15 0x00000000007f8000
+#define BM_15_22 BM_22_15
+#define BM_23_15 0x0000000000ff8000
+#define BM_15_23 BM_23_15
+#define BM_24_15 0x0000000001ff8000
+#define BM_15_24 BM_24_15
+#define BM_25_15 0x0000000003ff8000
+#define BM_15_25 BM_25_15
+#define BM_26_15 0x0000000007ff8000
+#define BM_15_26 BM_26_15
+#define BM_27_15 0x000000000fff8000
+#define BM_15_27 BM_27_15
+#define BM_28_15 0x000000001fff8000
+#define BM_15_28 BM_28_15
+#define BM_29_15 0x000000003fff8000
+#define BM_15_29 BM_29_15
+#define BM_30_15 0x000000007fff8000
+#define BM_15_30 BM_30_15
+#define BM_31_15 0x00000000ffff8000
+#define BM_15_31 BM_31_15
+#define BM_32_15 0x00000001ffff8000
+#define BM_15_32 BM_32_15
+#define BM_33_15 0x00000003ffff8000
+#define BM_15_33 BM_33_15
+#define BM_34_15 0x00000007ffff8000
+#define BM_15_34 BM_34_15
+#define BM_35_15 0x0000000fffff8000
+#define BM_15_35 BM_35_15
+#define BM_36_15 0x0000001fffff8000
+#define BM_15_36 BM_36_15
+#define BM_37_15 0x0000003fffff8000
+#define BM_15_37 BM_37_15
+#define BM_38_15 0x0000007fffff8000
+#define BM_15_38 BM_38_15
+#define BM_39_15 0x000000ffffff8000
+#define BM_15_39 BM_39_15
+#define BM_40_15 0x000001ffffff8000
+#define BM_15_40 BM_40_15
+#define BM_41_15 0x000003ffffff8000
+#define BM_15_41 BM_41_15
+#define BM_42_15 0x000007ffffff8000
+#define BM_15_42 BM_42_15
+#define BM_43_15 0x00000fffffff8000
+#define BM_15_43 BM_43_15
+#define BM_44_15 0x00001fffffff8000
+#define BM_15_44 BM_44_15
+#define BM_45_15 0x00003fffffff8000
+#define BM_15_45 BM_45_15
+#define BM_46_15 0x00007fffffff8000
+#define BM_15_46 BM_46_15
+#define BM_47_15 0x0000ffffffff8000
+#define BM_15_47 BM_47_15
+#define BM_48_15 0x0001ffffffff8000
+#define BM_15_48 BM_48_15
+#define BM_49_15 0x0003ffffffff8000
+#define BM_15_49 BM_49_15
+#define BM_50_15 0x0007ffffffff8000
+#define BM_15_50 BM_50_15
+#define BM_51_15 0x000fffffffff8000
+#define BM_15_51 BM_51_15
+#define BM_52_15 0x001fffffffff8000
+#define BM_15_52 BM_52_15
+#define BM_53_15 0x003fffffffff8000
+#define BM_15_53 BM_53_15
+#define BM_54_15 0x007fffffffff8000
+#define BM_15_54 BM_54_15
+#define BM_55_15 0x00ffffffffff8000
+#define BM_15_55 BM_55_15
+#define BM_56_15 0x01ffffffffff8000
+#define BM_15_56 BM_56_15
+#define BM_57_15 0x03ffffffffff8000
+#define BM_15_57 BM_57_15
+#define BM_58_15 0x07ffffffffff8000
+#define BM_15_58 BM_58_15
+#define BM_59_15 0x0fffffffffff8000
+#define BM_15_59 BM_59_15
+#define BM_60_15 0x1fffffffffff8000
+#define BM_15_60 BM_60_15
+#define BM_61_15 0x3fffffffffff8000
+#define BM_15_61 BM_61_15
+#define BM_62_15 0x7fffffffffff8000
+#define BM_15_62 BM_62_15
+#define BM_63_15 0xffffffffffff8000
+#define BM_15_63 BM_63_15
+#define BM_16_16 0x0000000000010000
+#define BM_17_16 0x0000000000030000
+#define BM_16_17 BM_17_16
+#define BM_18_16 0x0000000000070000
+#define BM_16_18 BM_18_16
+#define BM_19_16 0x00000000000f0000
+#define BM_16_19 BM_19_16
+#define BM_20_16 0x00000000001f0000
+#define BM_16_20 BM_20_16
+#define BM_21_16 0x00000000003f0000
+#define BM_16_21 BM_21_16
+#define BM_22_16 0x00000000007f0000
+#define BM_16_22 BM_22_16
+#define BM_23_16 0x0000000000ff0000
+#define BM_16_23 BM_23_16
+#define BM_24_16 0x0000000001ff0000
+#define BM_16_24 BM_24_16
+#define BM_25_16 0x0000000003ff0000
+#define BM_16_25 BM_25_16
+#define BM_26_16 0x0000000007ff0000
+#define BM_16_26 BM_26_16
+#define BM_27_16 0x000000000fff0000
+#define BM_16_27 BM_27_16
+#define BM_28_16 0x000000001fff0000
+#define BM_16_28 BM_28_16
+#define BM_29_16 0x000000003fff0000
+#define BM_16_29 BM_29_16
+#define BM_30_16 0x000000007fff0000
+#define BM_16_30 BM_30_16
+#define BM_31_16 0x00000000ffff0000
+#define BM_16_31 BM_31_16
+#define BM_32_16 0x00000001ffff0000
+#define BM_16_32 BM_32_16
+#define BM_33_16 0x00000003ffff0000
+#define BM_16_33 BM_33_16
+#define BM_34_16 0x00000007ffff0000
+#define BM_16_34 BM_34_16
+#define BM_35_16 0x0000000fffff0000
+#define BM_16_35 BM_35_16
+#define BM_36_16 0x0000001fffff0000
+#define BM_16_36 BM_36_16
+#define BM_37_16 0x0000003fffff0000
+#define BM_16_37 BM_37_16
+#define BM_38_16 0x0000007fffff0000
+#define BM_16_38 BM_38_16
+#define BM_39_16 0x000000ffffff0000
+#define BM_16_39 BM_39_16
+#define BM_40_16 0x000001ffffff0000
+#define BM_16_40 BM_40_16
+#define BM_41_16 0x000003ffffff0000
+#define BM_16_41 BM_41_16
+#define BM_42_16 0x000007ffffff0000
+#define BM_16_42 BM_42_16
+#define BM_43_16 0x00000fffffff0000
+#define BM_16_43 BM_43_16
+#define BM_44_16 0x00001fffffff0000
+#define BM_16_44 BM_44_16
+#define BM_45_16 0x00003fffffff0000
+#define BM_16_45 BM_45_16
+#define BM_46_16 0x00007fffffff0000
+#define BM_16_46 BM_46_16
+#define BM_47_16 0x0000ffffffff0000
+#define BM_16_47 BM_47_16
+#define BM_48_16 0x0001ffffffff0000
+#define BM_16_48 BM_48_16
+#define BM_49_16 0x0003ffffffff0000
+#define BM_16_49 BM_49_16
+#define BM_50_16 0x0007ffffffff0000
+#define BM_16_50 BM_50_16
+#define BM_51_16 0x000fffffffff0000
+#define BM_16_51 BM_51_16
+#define BM_52_16 0x001fffffffff0000
+#define BM_16_52 BM_52_16
+#define BM_53_16 0x003fffffffff0000
+#define BM_16_53 BM_53_16
+#define BM_54_16 0x007fffffffff0000
+#define BM_16_54 BM_54_16
+#define BM_55_16 0x00ffffffffff0000
+#define BM_16_55 BM_55_16
+#define BM_56_16 0x01ffffffffff0000
+#define BM_16_56 BM_56_16
+#define BM_57_16 0x03ffffffffff0000
+#define BM_16_57 BM_57_16
+#define BM_58_16 0x07ffffffffff0000
+#define BM_16_58 BM_58_16
+#define BM_59_16 0x0fffffffffff0000
+#define BM_16_59 BM_59_16
+#define BM_60_16 0x1fffffffffff0000
+#define BM_16_60 BM_60_16
+#define BM_61_16 0x3fffffffffff0000
+#define BM_16_61 BM_61_16
+#define BM_62_16 0x7fffffffffff0000
+#define BM_16_62 BM_62_16
+#define BM_63_16 0xffffffffffff0000
+#define BM_16_63 BM_63_16
+#define BM_17_17 0x0000000000020000
+#define BM_18_17 0x0000000000060000
+#define BM_17_18 BM_18_17
+#define BM_19_17 0x00000000000e0000
+#define BM_17_19 BM_19_17
+#define BM_20_17 0x00000000001e0000
+#define BM_17_20 BM_20_17
+#define BM_21_17 0x00000000003e0000
+#define BM_17_21 BM_21_17
+#define BM_22_17 0x00000000007e0000
+#define BM_17_22 BM_22_17
+#define BM_23_17 0x0000000000fe0000
+#define BM_17_23 BM_23_17
+#define BM_24_17 0x0000000001fe0000
+#define BM_17_24 BM_24_17
+#define BM_25_17 0x0000000003fe0000
+#define BM_17_25 BM_25_17
+#define BM_26_17 0x0000000007fe0000
+#define BM_17_26 BM_26_17
+#define BM_27_17 0x000000000ffe0000
+#define BM_17_27 BM_27_17
+#define BM_28_17 0x000000001ffe0000
+#define BM_17_28 BM_28_17
+#define BM_29_17 0x000000003ffe0000
+#define BM_17_29 BM_29_17
+#define BM_30_17 0x000000007ffe0000
+#define BM_17_30 BM_30_17
+#define BM_31_17 0x00000000fffe0000
+#define BM_17_31 BM_31_17
+#define BM_32_17 0x00000001fffe0000
+#define BM_17_32 BM_32_17
+#define BM_33_17 0x00000003fffe0000
+#define BM_17_33 BM_33_17
+#define BM_34_17 0x00000007fffe0000
+#define BM_17_34 BM_34_17
+#define BM_35_17 0x0000000ffffe0000
+#define BM_17_35 BM_35_17
+#define BM_36_17 0x0000001ffffe0000
+#define BM_17_36 BM_36_17
+#define BM_37_17 0x0000003ffffe0000
+#define BM_17_37 BM_37_17
+#define BM_38_17 0x0000007ffffe0000
+#define BM_17_38 BM_38_17
+#define BM_39_17 0x000000fffffe0000
+#define BM_17_39 BM_39_17
+#define BM_40_17 0x000001fffffe0000
+#define BM_17_40 BM_40_17
+#define BM_41_17 0x000003fffffe0000
+#define BM_17_41 BM_41_17
+#define BM_42_17 0x000007fffffe0000
+#define BM_17_42 BM_42_17
+#define BM_43_17 0x00000ffffffe0000
+#define BM_17_43 BM_43_17
+#define BM_44_17 0x00001ffffffe0000
+#define BM_17_44 BM_44_17
+#define BM_45_17 0x00003ffffffe0000
+#define BM_17_45 BM_45_17
+#define BM_46_17 0x00007ffffffe0000
+#define BM_17_46 BM_46_17
+#define BM_47_17 0x0000fffffffe0000
+#define BM_17_47 BM_47_17
+#define BM_48_17 0x0001fffffffe0000
+#define BM_17_48 BM_48_17
+#define BM_49_17 0x0003fffffffe0000
+#define BM_17_49 BM_49_17
+#define BM_50_17 0x0007fffffffe0000
+#define BM_17_50 BM_50_17
+#define BM_51_17 0x000ffffffffe0000
+#define BM_17_51 BM_51_17
+#define BM_52_17 0x001ffffffffe0000
+#define BM_17_52 BM_52_17
+#define BM_53_17 0x003ffffffffe0000
+#define BM_17_53 BM_53_17
+#define BM_54_17 0x007ffffffffe0000
+#define BM_17_54 BM_54_17
+#define BM_55_17 0x00fffffffffe0000
+#define BM_17_55 BM_55_17
+#define BM_56_17 0x01fffffffffe0000
+#define BM_17_56 BM_56_17
+#define BM_57_17 0x03fffffffffe0000
+#define BM_17_57 BM_57_17
+#define BM_58_17 0x07fffffffffe0000
+#define BM_17_58 BM_58_17
+#define BM_59_17 0x0ffffffffffe0000
+#define BM_17_59 BM_59_17
+#define BM_60_17 0x1ffffffffffe0000
+#define BM_17_60 BM_60_17
+#define BM_61_17 0x3ffffffffffe0000
+#define BM_17_61 BM_61_17
+#define BM_62_17 0x7ffffffffffe0000
+#define BM_17_62 BM_62_17
+#define BM_63_17 0xfffffffffffe0000
+#define BM_17_63 BM_63_17
+#define BM_18_18 0x0000000000040000
+#define BM_19_18 0x00000000000c0000
+#define BM_18_19 BM_19_18
+#define BM_20_18 0x00000000001c0000
+#define BM_18_20 BM_20_18
+#define BM_21_18 0x00000000003c0000
+#define BM_18_21 BM_21_18
+#define BM_22_18 0x00000000007c0000
+#define BM_18_22 BM_22_18
+#define BM_23_18 0x0000000000fc0000
+#define BM_18_23 BM_23_18
+#define BM_24_18 0x0000000001fc0000
+#define BM_18_24 BM_24_18
+#define BM_25_18 0x0000000003fc0000
+#define BM_18_25 BM_25_18
+#define BM_26_18 0x0000000007fc0000
+#define BM_18_26 BM_26_18
+#define BM_27_18 0x000000000ffc0000
+#define BM_18_27 BM_27_18
+#define BM_28_18 0x000000001ffc0000
+#define BM_18_28 BM_28_18
+#define BM_29_18 0x000000003ffc0000
+#define BM_18_29 BM_29_18
+#define BM_30_18 0x000000007ffc0000
+#define BM_18_30 BM_30_18
+#define BM_31_18 0x00000000fffc0000
+#define BM_18_31 BM_31_18
+#define BM_32_18 0x00000001fffc0000
+#define BM_18_32 BM_32_18
+#define BM_33_18 0x00000003fffc0000
+#define BM_18_33 BM_33_18
+#define BM_34_18 0x00000007fffc0000
+#define BM_18_34 BM_34_18
+#define BM_35_18 0x0000000ffffc0000
+#define BM_18_35 BM_35_18
+#define BM_36_18 0x0000001ffffc0000
+#define BM_18_36 BM_36_18
+#define BM_37_18 0x0000003ffffc0000
+#define BM_18_37 BM_37_18
+#define BM_38_18 0x0000007ffffc0000
+#define BM_18_38 BM_38_18
+#define BM_39_18 0x000000fffffc0000
+#define BM_18_39 BM_39_18
+#define BM_40_18 0x000001fffffc0000
+#define BM_18_40 BM_40_18
+#define BM_41_18 0x000003fffffc0000
+#define BM_18_41 BM_41_18
+#define BM_42_18 0x000007fffffc0000
+#define BM_18_42 BM_42_18
+#define BM_43_18 0x00000ffffffc0000
+#define BM_18_43 BM_43_18
+#define BM_44_18 0x00001ffffffc0000
+#define BM_18_44 BM_44_18
+#define BM_45_18 0x00003ffffffc0000
+#define BM_18_45 BM_45_18
+#define BM_46_18 0x00007ffffffc0000
+#define BM_18_46 BM_46_18
+#define BM_47_18 0x0000fffffffc0000
+#define BM_18_47 BM_47_18
+#define BM_48_18 0x0001fffffffc0000
+#define BM_18_48 BM_48_18
+#define BM_49_18 0x0003fffffffc0000
+#define BM_18_49 BM_49_18
+#define BM_50_18 0x0007fffffffc0000
+#define BM_18_50 BM_50_18
+#define BM_51_18 0x000ffffffffc0000
+#define BM_18_51 BM_51_18
+#define BM_52_18 0x001ffffffffc0000
+#define BM_18_52 BM_52_18
+#define BM_53_18 0x003ffffffffc0000
+#define BM_18_53 BM_53_18
+#define BM_54_18 0x007ffffffffc0000
+#define BM_18_54 BM_54_18
+#define BM_55_18 0x00fffffffffc0000
+#define BM_18_55 BM_55_18
+#define BM_56_18 0x01fffffffffc0000
+#define BM_18_56 BM_56_18
+#define BM_57_18 0x03fffffffffc0000
+#define BM_18_57 BM_57_18
+#define BM_58_18 0x07fffffffffc0000
+#define BM_18_58 BM_58_18
+#define BM_59_18 0x0ffffffffffc0000
+#define BM_18_59 BM_59_18
+#define BM_60_18 0x1ffffffffffc0000
+#define BM_18_60 BM_60_18
+#define BM_61_18 0x3ffffffffffc0000
+#define BM_18_61 BM_61_18
+#define BM_62_18 0x7ffffffffffc0000
+#define BM_18_62 BM_62_18
+#define BM_63_18 0xfffffffffffc0000
+#define BM_18_63 BM_63_18
+#define BM_19_19 0x0000000000080000
+#define BM_20_19 0x0000000000180000
+#define BM_19_20 BM_20_19
+#define BM_21_19 0x0000000000380000
+#define BM_19_21 BM_21_19
+#define BM_22_19 0x0000000000780000
+#define BM_19_22 BM_22_19
+#define BM_23_19 0x0000000000f80000
+#define BM_19_23 BM_23_19
+#define BM_24_19 0x0000000001f80000
+#define BM_19_24 BM_24_19
+#define BM_25_19 0x0000000003f80000
+#define BM_19_25 BM_25_19
+#define BM_26_19 0x0000000007f80000
+#define BM_19_26 BM_26_19
+#define BM_27_19 0x000000000ff80000
+#define BM_19_27 BM_27_19
+#define BM_28_19 0x000000001ff80000
+#define BM_19_28 BM_28_19
+#define BM_29_19 0x000000003ff80000
+#define BM_19_29 BM_29_19
+#define BM_30_19 0x000000007ff80000
+#define BM_19_30 BM_30_19
+#define BM_31_19 0x00000000fff80000
+#define BM_19_31 BM_31_19
+#define BM_32_19 0x00000001fff80000
+#define BM_19_32 BM_32_19
+#define BM_33_19 0x00000003fff80000
+#define BM_19_33 BM_33_19
+#define BM_34_19 0x00000007fff80000
+#define BM_19_34 BM_34_19
+#define BM_35_19 0x0000000ffff80000
+#define BM_19_35 BM_35_19
+#define BM_36_19 0x0000001ffff80000
+#define BM_19_36 BM_36_19
+#define BM_37_19 0x0000003ffff80000
+#define BM_19_37 BM_37_19
+#define BM_38_19 0x0000007ffff80000
+#define BM_19_38 BM_38_19
+#define BM_39_19 0x000000fffff80000
+#define BM_19_39 BM_39_19
+#define BM_40_19 0x000001fffff80000
+#define BM_19_40 BM_40_19
+#define BM_41_19 0x000003fffff80000
+#define BM_19_41 BM_41_19
+#define BM_42_19 0x000007fffff80000
+#define BM_19_42 BM_42_19
+#define BM_43_19 0x00000ffffff80000
+#define BM_19_43 BM_43_19
+#define BM_44_19 0x00001ffffff80000
+#define BM_19_44 BM_44_19
+#define BM_45_19 0x00003ffffff80000
+#define BM_19_45 BM_45_19
+#define BM_46_19 0x00007ffffff80000
+#define BM_19_46 BM_46_19
+#define BM_47_19 0x0000fffffff80000
+#define BM_19_47 BM_47_19
+#define BM_48_19 0x0001fffffff80000
+#define BM_19_48 BM_48_19
+#define BM_49_19 0x0003fffffff80000
+#define BM_19_49 BM_49_19
+#define BM_50_19 0x0007fffffff80000
+#define BM_19_50 BM_50_19
+#define BM_51_19 0x000ffffffff80000
+#define BM_19_51 BM_51_19
+#define BM_52_19 0x001ffffffff80000
+#define BM_19_52 BM_52_19
+#define BM_53_19 0x003ffffffff80000
+#define BM_19_53 BM_53_19
+#define BM_54_19 0x007ffffffff80000
+#define BM_19_54 BM_54_19
+#define BM_55_19 0x00fffffffff80000
+#define BM_19_55 BM_55_19
+#define BM_56_19 0x01fffffffff80000
+#define BM_19_56 BM_56_19
+#define BM_57_19 0x03fffffffff80000
+#define BM_19_57 BM_57_19
+#define BM_58_19 0x07fffffffff80000
+#define BM_19_58 BM_58_19
+#define BM_59_19 0x0ffffffffff80000
+#define BM_19_59 BM_59_19
+#define BM_60_19 0x1ffffffffff80000
+#define BM_19_60 BM_60_19
+#define BM_61_19 0x3ffffffffff80000
+#define BM_19_61 BM_61_19
+#define BM_62_19 0x7ffffffffff80000
+#define BM_19_62 BM_62_19
+#define BM_63_19 0xfffffffffff80000
+#define BM_19_63 BM_63_19
+#define BM_20_20 0x0000000000100000
+#define BM_21_20 0x0000000000300000
+#define BM_20_21 BM_21_20
+#define BM_22_20 0x0000000000700000
+#define BM_20_22 BM_22_20
+#define BM_23_20 0x0000000000f00000
+#define BM_20_23 BM_23_20
+#define BM_24_20 0x0000000001f00000
+#define BM_20_24 BM_24_20
+#define BM_25_20 0x0000000003f00000
+#define BM_20_25 BM_25_20
+#define BM_26_20 0x0000000007f00000
+#define BM_20_26 BM_26_20
+#define BM_27_20 0x000000000ff00000
+#define BM_20_27 BM_27_20
+#define BM_28_20 0x000000001ff00000
+#define BM_20_28 BM_28_20
+#define BM_29_20 0x000000003ff00000
+#define BM_20_29 BM_29_20
+#define BM_30_20 0x000000007ff00000
+#define BM_20_30 BM_30_20
+#define BM_31_20 0x00000000fff00000
+#define BM_20_31 BM_31_20
+#define BM_32_20 0x00000001fff00000
+#define BM_20_32 BM_32_20
+#define BM_33_20 0x00000003fff00000
+#define BM_20_33 BM_33_20
+#define BM_34_20 0x00000007fff00000
+#define BM_20_34 BM_34_20
+#define BM_35_20 0x0000000ffff00000
+#define BM_20_35 BM_35_20
+#define BM_36_20 0x0000001ffff00000
+#define BM_20_36 BM_36_20
+#define BM_37_20 0x0000003ffff00000
+#define BM_20_37 BM_37_20
+#define BM_38_20 0x0000007ffff00000
+#define BM_20_38 BM_38_20
+#define BM_39_20 0x000000fffff00000
+#define BM_20_39 BM_39_20
+#define BM_40_20 0x000001fffff00000
+#define BM_20_40 BM_40_20
+#define BM_41_20 0x000003fffff00000
+#define BM_20_41 BM_41_20
+#define BM_42_20 0x000007fffff00000
+#define BM_20_42 BM_42_20
+#define BM_43_20 0x00000ffffff00000
+#define BM_20_43 BM_43_20
+#define BM_44_20 0x00001ffffff00000
+#define BM_20_44 BM_44_20
+#define BM_45_20 0x00003ffffff00000
+#define BM_20_45 BM_45_20
+#define BM_46_20 0x00007ffffff00000
+#define BM_20_46 BM_46_20
+#define BM_47_20 0x0000fffffff00000
+#define BM_20_47 BM_47_20
+#define BM_48_20 0x0001fffffff00000
+#define BM_20_48 BM_48_20
+#define BM_49_20 0x0003fffffff00000
+#define BM_20_49 BM_49_20
+#define BM_50_20 0x0007fffffff00000
+#define BM_20_50 BM_50_20
+#define BM_51_20 0x000ffffffff00000
+#define BM_20_51 BM_51_20
+#define BM_52_20 0x001ffffffff00000
+#define BM_20_52 BM_52_20
+#define BM_53_20 0x003ffffffff00000
+#define BM_20_53 BM_53_20
+#define BM_54_20 0x007ffffffff00000
+#define BM_20_54 BM_54_20
+#define BM_55_20 0x00fffffffff00000
+#define BM_20_55 BM_55_20
+#define BM_56_20 0x01fffffffff00000
+#define BM_20_56 BM_56_20
+#define BM_57_20 0x03fffffffff00000
+#define BM_20_57 BM_57_20
+#define BM_58_20 0x07fffffffff00000
+#define BM_20_58 BM_58_20
+#define BM_59_20 0x0ffffffffff00000
+#define BM_20_59 BM_59_20
+#define BM_60_20 0x1ffffffffff00000
+#define BM_20_60 BM_60_20
+#define BM_61_20 0x3ffffffffff00000
+#define BM_20_61 BM_61_20
+#define BM_62_20 0x7ffffffffff00000
+#define BM_20_62 BM_62_20
+#define BM_63_20 0xfffffffffff00000
+#define BM_20_63 BM_63_20
+#define BM_21_21 0x0000000000200000
+#define BM_22_21 0x0000000000600000
+#define BM_21_22 BM_22_21
+#define BM_23_21 0x0000000000e00000
+#define BM_21_23 BM_23_21
+#define BM_24_21 0x0000000001e00000
+#define BM_21_24 BM_24_21
+#define BM_25_21 0x0000000003e00000
+#define BM_21_25 BM_25_21
+#define BM_26_21 0x0000000007e00000
+#define BM_21_26 BM_26_21
+#define BM_27_21 0x000000000fe00000
+#define BM_21_27 BM_27_21
+#define BM_28_21 0x000000001fe00000
+#define BM_21_28 BM_28_21
+#define BM_29_21 0x000000003fe00000
+#define BM_21_29 BM_29_21
+#define BM_30_21 0x000000007fe00000
+#define BM_21_30 BM_30_21
+#define BM_31_21 0x00000000ffe00000
+#define BM_21_31 BM_31_21
+#define BM_32_21 0x00000001ffe00000
+#define BM_21_32 BM_32_21
+#define BM_33_21 0x00000003ffe00000
+#define BM_21_33 BM_33_21
+#define BM_34_21 0x00000007ffe00000
+#define BM_21_34 BM_34_21
+#define BM_35_21 0x0000000fffe00000
+#define BM_21_35 BM_35_21
+#define BM_36_21 0x0000001fffe00000
+#define BM_21_36 BM_36_21
+#define BM_37_21 0x0000003fffe00000
+#define BM_21_37 BM_37_21
+#define BM_38_21 0x0000007fffe00000
+#define BM_21_38 BM_38_21
+#define BM_39_21 0x000000ffffe00000
+#define BM_21_39 BM_39_21
+#define BM_40_21 0x000001ffffe00000
+#define BM_21_40 BM_40_21
+#define BM_41_21 0x000003ffffe00000
+#define BM_21_41 BM_41_21
+#define BM_42_21 0x000007ffffe00000
+#define BM_21_42 BM_42_21
+#define BM_43_21 0x00000fffffe00000
+#define BM_21_43 BM_43_21
+#define BM_44_21 0x00001fffffe00000
+#define BM_21_44 BM_44_21
+#define BM_45_21 0x00003fffffe00000
+#define BM_21_45 BM_45_21
+#define BM_46_21 0x00007fffffe00000
+#define BM_21_46 BM_46_21
+#define BM_47_21 0x0000ffffffe00000
+#define BM_21_47 BM_47_21
+#define BM_48_21 0x0001ffffffe00000
+#define BM_21_48 BM_48_21
+#define BM_49_21 0x0003ffffffe00000
+#define BM_21_49 BM_49_21
+#define BM_50_21 0x0007ffffffe00000
+#define BM_21_50 BM_50_21
+#define BM_51_21 0x000fffffffe00000
+#define BM_21_51 BM_51_21
+#define BM_52_21 0x001fffffffe00000
+#define BM_21_52 BM_52_21
+#define BM_53_21 0x003fffffffe00000
+#define BM_21_53 BM_53_21
+#define BM_54_21 0x007fffffffe00000
+#define BM_21_54 BM_54_21
+#define BM_55_21 0x00ffffffffe00000
+#define BM_21_55 BM_55_21
+#define BM_56_21 0x01ffffffffe00000
+#define BM_21_56 BM_56_21
+#define BM_57_21 0x03ffffffffe00000
+#define BM_21_57 BM_57_21
+#define BM_58_21 0x07ffffffffe00000
+#define BM_21_58 BM_58_21
+#define BM_59_21 0x0fffffffffe00000
+#define BM_21_59 BM_59_21
+#define BM_60_21 0x1fffffffffe00000
+#define BM_21_60 BM_60_21
+#define BM_61_21 0x3fffffffffe00000
+#define BM_21_61 BM_61_21
+#define BM_62_21 0x7fffffffffe00000
+#define BM_21_62 BM_62_21
+#define BM_63_21 0xffffffffffe00000
+#define BM_21_63 BM_63_21
+#define BM_22_22 0x0000000000400000
+#define BM_23_22 0x0000000000c00000
+#define BM_22_23 BM_23_22
+#define BM_24_22 0x0000000001c00000
+#define BM_22_24 BM_24_22
+#define BM_25_22 0x0000000003c00000
+#define BM_22_25 BM_25_22
+#define BM_26_22 0x0000000007c00000
+#define BM_22_26 BM_26_22
+#define BM_27_22 0x000000000fc00000
+#define BM_22_27 BM_27_22
+#define BM_28_22 0x000000001fc00000
+#define BM_22_28 BM_28_22
+#define BM_29_22 0x000000003fc00000
+#define BM_22_29 BM_29_22
+#define BM_30_22 0x000000007fc00000
+#define BM_22_30 BM_30_22
+#define BM_31_22 0x00000000ffc00000
+#define BM_22_31 BM_31_22
+#define BM_32_22 0x00000001ffc00000
+#define BM_22_32 BM_32_22
+#define BM_33_22 0x00000003ffc00000
+#define BM_22_33 BM_33_22
+#define BM_34_22 0x00000007ffc00000
+#define BM_22_34 BM_34_22
+#define BM_35_22 0x0000000fffc00000
+#define BM_22_35 BM_35_22
+#define BM_36_22 0x0000001fffc00000
+#define BM_22_36 BM_36_22
+#define BM_37_22 0x0000003fffc00000
+#define BM_22_37 BM_37_22
+#define BM_38_22 0x0000007fffc00000
+#define BM_22_38 BM_38_22
+#define BM_39_22 0x000000ffffc00000
+#define BM_22_39 BM_39_22
+#define BM_40_22 0x000001ffffc00000
+#define BM_22_40 BM_40_22
+#define BM_41_22 0x000003ffffc00000
+#define BM_22_41 BM_41_22
+#define BM_42_22 0x000007ffffc00000
+#define BM_22_42 BM_42_22
+#define BM_43_22 0x00000fffffc00000
+#define BM_22_43 BM_43_22
+#define BM_44_22 0x00001fffffc00000
+#define BM_22_44 BM_44_22
+#define BM_45_22 0x00003fffffc00000
+#define BM_22_45 BM_45_22
+#define BM_46_22 0x00007fffffc00000
+#define BM_22_46 BM_46_22
+#define BM_47_22 0x0000ffffffc00000
+#define BM_22_47 BM_47_22
+#define BM_48_22 0x0001ffffffc00000
+#define BM_22_48 BM_48_22
+#define BM_49_22 0x0003ffffffc00000
+#define BM_22_49 BM_49_22
+#define BM_50_22 0x0007ffffffc00000
+#define BM_22_50 BM_50_22
+#define BM_51_22 0x000fffffffc00000
+#define BM_22_51 BM_51_22
+#define BM_52_22 0x001fffffffc00000
+#define BM_22_52 BM_52_22
+#define BM_53_22 0x003fffffffc00000
+#define BM_22_53 BM_53_22
+#define BM_54_22 0x007fffffffc00000
+#define BM_22_54 BM_54_22
+#define BM_55_22 0x00ffffffffc00000
+#define BM_22_55 BM_55_22
+#define BM_56_22 0x01ffffffffc00000
+#define BM_22_56 BM_56_22
+#define BM_57_22 0x03ffffffffc00000
+#define BM_22_57 BM_57_22
+#define BM_58_22 0x07ffffffffc00000
+#define BM_22_58 BM_58_22
+#define BM_59_22 0x0fffffffffc00000
+#define BM_22_59 BM_59_22
+#define BM_60_22 0x1fffffffffc00000
+#define BM_22_60 BM_60_22
+#define BM_61_22 0x3fffffffffc00000
+#define BM_22_61 BM_61_22
+#define BM_62_22 0x7fffffffffc00000
+#define BM_22_62 BM_62_22
+#define BM_63_22 0xffffffffffc00000
+#define BM_22_63 BM_63_22
+#define BM_23_23 0x0000000000800000
+#define BM_24_23 0x0000000001800000
+#define BM_23_24 BM_24_23
+#define BM_25_23 0x0000000003800000
+#define BM_23_25 BM_25_23
+#define BM_26_23 0x0000000007800000
+#define BM_23_26 BM_26_23
+#define BM_27_23 0x000000000f800000
+#define BM_23_27 BM_27_23
+#define BM_28_23 0x000000001f800000
+#define BM_23_28 BM_28_23
+#define BM_29_23 0x000000003f800000
+#define BM_23_29 BM_29_23
+#define BM_30_23 0x000000007f800000
+#define BM_23_30 BM_30_23
+#define BM_31_23 0x00000000ff800000
+#define BM_23_31 BM_31_23
+#define BM_32_23 0x00000001ff800000
+#define BM_23_32 BM_32_23
+#define BM_33_23 0x00000003ff800000
+#define BM_23_33 BM_33_23
+#define BM_34_23 0x00000007ff800000
+#define BM_23_34 BM_34_23
+#define BM_35_23 0x0000000fff800000
+#define BM_23_35 BM_35_23
+#define BM_36_23 0x0000001fff800000
+#define BM_23_36 BM_36_23
+#define BM_37_23 0x0000003fff800000
+#define BM_23_37 BM_37_23
+#define BM_38_23 0x0000007fff800000
+#define BM_23_38 BM_38_23
+#define BM_39_23 0x000000ffff800000
+#define BM_23_39 BM_39_23
+#define BM_40_23 0x000001ffff800000
+#define BM_23_40 BM_40_23
+#define BM_41_23 0x000003ffff800000
+#define BM_23_41 BM_41_23
+#define BM_42_23 0x000007ffff800000
+#define BM_23_42 BM_42_23
+#define BM_43_23 0x00000fffff800000
+#define BM_23_43 BM_43_23
+#define BM_44_23 0x00001fffff800000
+#define BM_23_44 BM_44_23
+#define BM_45_23 0x00003fffff800000
+#define BM_23_45 BM_45_23
+#define BM_46_23 0x00007fffff800000
+#define BM_23_46 BM_46_23
+#define BM_47_23 0x0000ffffff800000
+#define BM_23_47 BM_47_23
+#define BM_48_23 0x0001ffffff800000
+#define BM_23_48 BM_48_23
+#define BM_49_23 0x0003ffffff800000
+#define BM_23_49 BM_49_23
+#define BM_50_23 0x0007ffffff800000
+#define BM_23_50 BM_50_23
+#define BM_51_23 0x000fffffff800000
+#define BM_23_51 BM_51_23
+#define BM_52_23 0x001fffffff800000
+#define BM_23_52 BM_52_23
+#define BM_53_23 0x003fffffff800000
+#define BM_23_53 BM_53_23
+#define BM_54_23 0x007fffffff800000
+#define BM_23_54 BM_54_23
+#define BM_55_23 0x00ffffffff800000
+#define BM_23_55 BM_55_23
+#define BM_56_23 0x01ffffffff800000
+#define BM_23_56 BM_56_23
+#define BM_57_23 0x03ffffffff800000
+#define BM_23_57 BM_57_23
+#define BM_58_23 0x07ffffffff800000
+#define BM_23_58 BM_58_23
+#define BM_59_23 0x0fffffffff800000
+#define BM_23_59 BM_59_23
+#define BM_60_23 0x1fffffffff800000
+#define BM_23_60 BM_60_23
+#define BM_61_23 0x3fffffffff800000
+#define BM_23_61 BM_61_23
+#define BM_62_23 0x7fffffffff800000
+#define BM_23_62 BM_62_23
+#define BM_63_23 0xffffffffff800000
+#define BM_23_63 BM_63_23
+#define BM_24_24 0x0000000001000000
+#define BM_25_24 0x0000000003000000
+#define BM_24_25 BM_25_24
+#define BM_26_24 0x0000000007000000
+#define BM_24_26 BM_26_24
+#define BM_27_24 0x000000000f000000
+#define BM_24_27 BM_27_24
+#define BM_28_24 0x000000001f000000
+#define BM_24_28 BM_28_24
+#define BM_29_24 0x000000003f000000
+#define BM_24_29 BM_29_24
+#define BM_30_24 0x000000007f000000
+#define BM_24_30 BM_30_24
+#define BM_31_24 0x00000000ff000000
+#define BM_24_31 BM_31_24
+#define BM_32_24 0x00000001ff000000
+#define BM_24_32 BM_32_24
+#define BM_33_24 0x00000003ff000000
+#define BM_24_33 BM_33_24
+#define BM_34_24 0x00000007ff000000
+#define BM_24_34 BM_34_24
+#define BM_35_24 0x0000000fff000000
+#define BM_24_35 BM_35_24
+#define BM_36_24 0x0000001fff000000
+#define BM_24_36 BM_36_24
+#define BM_37_24 0x0000003fff000000
+#define BM_24_37 BM_37_24
+#define BM_38_24 0x0000007fff000000
+#define BM_24_38 BM_38_24
+#define BM_39_24 0x000000ffff000000
+#define BM_24_39 BM_39_24
+#define BM_40_24 0x000001ffff000000
+#define BM_24_40 BM_40_24
+#define BM_41_24 0x000003ffff000000
+#define BM_24_41 BM_41_24
+#define BM_42_24 0x000007ffff000000
+#define BM_24_42 BM_42_24
+#define BM_43_24 0x00000fffff000000
+#define BM_24_43 BM_43_24
+#define BM_44_24 0x00001fffff000000
+#define BM_24_44 BM_44_24
+#define BM_45_24 0x00003fffff000000
+#define BM_24_45 BM_45_24
+#define BM_46_24 0x00007fffff000000
+#define BM_24_46 BM_46_24
+#define BM_47_24 0x0000ffffff000000
+#define BM_24_47 BM_47_24
+#define BM_48_24 0x0001ffffff000000
+#define BM_24_48 BM_48_24
+#define BM_49_24 0x0003ffffff000000
+#define BM_24_49 BM_49_24
+#define BM_50_24 0x0007ffffff000000
+#define BM_24_50 BM_50_24
+#define BM_51_24 0x000fffffff000000
+#define BM_24_51 BM_51_24
+#define BM_52_24 0x001fffffff000000
+#define BM_24_52 BM_52_24
+#define BM_53_24 0x003fffffff000000
+#define BM_24_53 BM_53_24
+#define BM_54_24 0x007fffffff000000
+#define BM_24_54 BM_54_24
+#define BM_55_24 0x00ffffffff000000
+#define BM_24_55 BM_55_24
+#define BM_56_24 0x01ffffffff000000
+#define BM_24_56 BM_56_24
+#define BM_57_24 0x03ffffffff000000
+#define BM_24_57 BM_57_24
+#define BM_58_24 0x07ffffffff000000
+#define BM_24_58 BM_58_24
+#define BM_59_24 0x0fffffffff000000
+#define BM_24_59 BM_59_24
+#define BM_60_24 0x1fffffffff000000
+#define BM_24_60 BM_60_24
+#define BM_61_24 0x3fffffffff000000
+#define BM_24_61 BM_61_24
+#define BM_62_24 0x7fffffffff000000
+#define BM_24_62 BM_62_24
+#define BM_63_24 0xffffffffff000000
+#define BM_24_63 BM_63_24
+#define BM_25_25 0x0000000002000000
+#define BM_26_25 0x0000000006000000
+#define BM_25_26 BM_26_25
+#define BM_27_25 0x000000000e000000
+#define BM_25_27 BM_27_25
+#define BM_28_25 0x000000001e000000
+#define BM_25_28 BM_28_25
+#define BM_29_25 0x000000003e000000
+#define BM_25_29 BM_29_25
+#define BM_30_25 0x000000007e000000
+#define BM_25_30 BM_30_25
+#define BM_31_25 0x00000000fe000000
+#define BM_25_31 BM_31_25
+#define BM_32_25 0x00000001fe000000
+#define BM_25_32 BM_32_25
+#define BM_33_25 0x00000003fe000000
+#define BM_25_33 BM_33_25
+#define BM_34_25 0x00000007fe000000
+#define BM_25_34 BM_34_25
+#define BM_35_25 0x0000000ffe000000
+#define BM_25_35 BM_35_25
+#define BM_36_25 0x0000001ffe000000
+#define BM_25_36 BM_36_25
+#define BM_37_25 0x0000003ffe000000
+#define BM_25_37 BM_37_25
+#define BM_38_25 0x0000007ffe000000
+#define BM_25_38 BM_38_25
+#define BM_39_25 0x000000fffe000000
+#define BM_25_39 BM_39_25
+#define BM_40_25 0x000001fffe000000
+#define BM_25_40 BM_40_25
+#define BM_41_25 0x000003fffe000000
+#define BM_25_41 BM_41_25
+#define BM_42_25 0x000007fffe000000
+#define BM_25_42 BM_42_25
+#define BM_43_25 0x00000ffffe000000
+#define BM_25_43 BM_43_25
+#define BM_44_25 0x00001ffffe000000
+#define BM_25_44 BM_44_25
+#define BM_45_25 0x00003ffffe000000
+#define BM_25_45 BM_45_25
+#define BM_46_25 0x00007ffffe000000
+#define BM_25_46 BM_46_25
+#define BM_47_25 0x0000fffffe000000
+#define BM_25_47 BM_47_25
+#define BM_48_25 0x0001fffffe000000
+#define BM_25_48 BM_48_25
+#define BM_49_25 0x0003fffffe000000
+#define BM_25_49 BM_49_25
+#define BM_50_25 0x0007fffffe000000
+#define BM_25_50 BM_50_25
+#define BM_51_25 0x000ffffffe000000
+#define BM_25_51 BM_51_25
+#define BM_52_25 0x001ffffffe000000
+#define BM_25_52 BM_52_25
+#define BM_53_25 0x003ffffffe000000
+#define BM_25_53 BM_53_25
+#define BM_54_25 0x007ffffffe000000
+#define BM_25_54 BM_54_25
+#define BM_55_25 0x00fffffffe000000
+#define BM_25_55 BM_55_25
+#define BM_56_25 0x01fffffffe000000
+#define BM_25_56 BM_56_25
+#define BM_57_25 0x03fffffffe000000
+#define BM_25_57 BM_57_25
+#define BM_58_25 0x07fffffffe000000
+#define BM_25_58 BM_58_25
+#define BM_59_25 0x0ffffffffe000000
+#define BM_25_59 BM_59_25
+#define BM_60_25 0x1ffffffffe000000
+#define BM_25_60 BM_60_25
+#define BM_61_25 0x3ffffffffe000000
+#define BM_25_61 BM_61_25
+#define BM_62_25 0x7ffffffffe000000
+#define BM_25_62 BM_62_25
+#define BM_63_25 0xfffffffffe000000
+#define BM_25_63 BM_63_25
+#define BM_26_26 0x0000000004000000
+#define BM_27_26 0x000000000c000000
+#define BM_26_27 BM_27_26
+#define BM_28_26 0x000000001c000000
+#define BM_26_28 BM_28_26
+#define BM_29_26 0x000000003c000000
+#define BM_26_29 BM_29_26
+#define BM_30_26 0x000000007c000000
+#define BM_26_30 BM_30_26
+#define BM_31_26 0x00000000fc000000
+#define BM_26_31 BM_31_26
+#define BM_32_26 0x00000001fc000000
+#define BM_26_32 BM_32_26
+#define BM_33_26 0x00000003fc000000
+#define BM_26_33 BM_33_26
+#define BM_34_26 0x00000007fc000000
+#define BM_26_34 BM_34_26
+#define BM_35_26 0x0000000ffc000000
+#define BM_26_35 BM_35_26
+#define BM_36_26 0x0000001ffc000000
+#define BM_26_36 BM_36_26
+#define BM_37_26 0x0000003ffc000000
+#define BM_26_37 BM_37_26
+#define BM_38_26 0x0000007ffc000000
+#define BM_26_38 BM_38_26
+#define BM_39_26 0x000000fffc000000
+#define BM_26_39 BM_39_26
+#define BM_40_26 0x000001fffc000000
+#define BM_26_40 BM_40_26
+#define BM_41_26 0x000003fffc000000
+#define BM_26_41 BM_41_26
+#define BM_42_26 0x000007fffc000000
+#define BM_26_42 BM_42_26
+#define BM_43_26 0x00000ffffc000000
+#define BM_26_43 BM_43_26
+#define BM_44_26 0x00001ffffc000000
+#define BM_26_44 BM_44_26
+#define BM_45_26 0x00003ffffc000000
+#define BM_26_45 BM_45_26
+#define BM_46_26 0x00007ffffc000000
+#define BM_26_46 BM_46_26
+#define BM_47_26 0x0000fffffc000000
+#define BM_26_47 BM_47_26
+#define BM_48_26 0x0001fffffc000000
+#define BM_26_48 BM_48_26
+#define BM_49_26 0x0003fffffc000000
+#define BM_26_49 BM_49_26
+#define BM_50_26 0x0007fffffc000000
+#define BM_26_50 BM_50_26
+#define BM_51_26 0x000ffffffc000000
+#define BM_26_51 BM_51_26
+#define BM_52_26 0x001ffffffc000000
+#define BM_26_52 BM_52_26
+#define BM_53_26 0x003ffffffc000000
+#define BM_26_53 BM_53_26
+#define BM_54_26 0x007ffffffc000000
+#define BM_26_54 BM_54_26
+#define BM_55_26 0x00fffffffc000000
+#define BM_26_55 BM_55_26
+#define BM_56_26 0x01fffffffc000000
+#define BM_26_56 BM_56_26
+#define BM_57_26 0x03fffffffc000000
+#define BM_26_57 BM_57_26
+#define BM_58_26 0x07fffffffc000000
+#define BM_26_58 BM_58_26
+#define BM_59_26 0x0ffffffffc000000
+#define BM_26_59 BM_59_26
+#define BM_60_26 0x1ffffffffc000000
+#define BM_26_60 BM_60_26
+#define BM_61_26 0x3ffffffffc000000
+#define BM_26_61 BM_61_26
+#define BM_62_26 0x7ffffffffc000000
+#define BM_26_62 BM_62_26
+#define BM_63_26 0xfffffffffc000000
+#define BM_26_63 BM_63_26
+#define BM_27_27 0x0000000008000000
+#define BM_28_27 0x0000000018000000
+#define BM_27_28 BM_28_27
+#define BM_29_27 0x0000000038000000
+#define BM_27_29 BM_29_27
+#define BM_30_27 0x0000000078000000
+#define BM_27_30 BM_30_27
+#define BM_31_27 0x00000000f8000000
+#define BM_27_31 BM_31_27
+#define BM_32_27 0x00000001f8000000
+#define BM_27_32 BM_32_27
+#define BM_33_27 0x00000003f8000000
+#define BM_27_33 BM_33_27
+#define BM_34_27 0x00000007f8000000
+#define BM_27_34 BM_34_27
+#define BM_35_27 0x0000000ff8000000
+#define BM_27_35 BM_35_27
+#define BM_36_27 0x0000001ff8000000
+#define BM_27_36 BM_36_27
+#define BM_37_27 0x0000003ff8000000
+#define BM_27_37 BM_37_27
+#define BM_38_27 0x0000007ff8000000
+#define BM_27_38 BM_38_27
+#define BM_39_27 0x000000fff8000000
+#define BM_27_39 BM_39_27
+#define BM_40_27 0x000001fff8000000
+#define BM_27_40 BM_40_27
+#define BM_41_27 0x000003fff8000000
+#define BM_27_41 BM_41_27
+#define BM_42_27 0x000007fff8000000
+#define BM_27_42 BM_42_27
+#define BM_43_27 0x00000ffff8000000
+#define BM_27_43 BM_43_27
+#define BM_44_27 0x00001ffff8000000
+#define BM_27_44 BM_44_27
+#define BM_45_27 0x00003ffff8000000
+#define BM_27_45 BM_45_27
+#define BM_46_27 0x00007ffff8000000
+#define BM_27_46 BM_46_27
+#define BM_47_27 0x0000fffff8000000
+#define BM_27_47 BM_47_27
+#define BM_48_27 0x0001fffff8000000
+#define BM_27_48 BM_48_27
+#define BM_49_27 0x0003fffff8000000
+#define BM_27_49 BM_49_27
+#define BM_50_27 0x0007fffff8000000
+#define BM_27_50 BM_50_27
+#define BM_51_27 0x000ffffff8000000
+#define BM_27_51 BM_51_27
+#define BM_52_27 0x001ffffff8000000
+#define BM_27_52 BM_52_27
+#define BM_53_27 0x003ffffff8000000
+#define BM_27_53 BM_53_27
+#define BM_54_27 0x007ffffff8000000
+#define BM_27_54 BM_54_27
+#define BM_55_27 0x00fffffff8000000
+#define BM_27_55 BM_55_27
+#define BM_56_27 0x01fffffff8000000
+#define BM_27_56 BM_56_27
+#define BM_57_27 0x03fffffff8000000
+#define BM_27_57 BM_57_27
+#define BM_58_27 0x07fffffff8000000
+#define BM_27_58 BM_58_27
+#define BM_59_27 0x0ffffffff8000000
+#define BM_27_59 BM_59_27
+#define BM_60_27 0x1ffffffff8000000
+#define BM_27_60 BM_60_27
+#define BM_61_27 0x3ffffffff8000000
+#define BM_27_61 BM_61_27
+#define BM_62_27 0x7ffffffff8000000
+#define BM_27_62 BM_62_27
+#define BM_63_27 0xfffffffff8000000
+#define BM_27_63 BM_63_27
+#define BM_28_28 0x0000000010000000
+#define BM_29_28 0x0000000030000000
+#define BM_28_29 BM_29_28
+#define BM_30_28 0x0000000070000000
+#define BM_28_30 BM_30_28
+#define BM_31_28 0x00000000f0000000
+#define BM_28_31 BM_31_28
+#define BM_32_28 0x00000001f0000000
+#define BM_28_32 BM_32_28
+#define BM_33_28 0x00000003f0000000
+#define BM_28_33 BM_33_28
+#define BM_34_28 0x00000007f0000000
+#define BM_28_34 BM_34_28
+#define BM_35_28 0x0000000ff0000000
+#define BM_28_35 BM_35_28
+#define BM_36_28 0x0000001ff0000000
+#define BM_28_36 BM_36_28
+#define BM_37_28 0x0000003ff0000000
+#define BM_28_37 BM_37_28
+#define BM_38_28 0x0000007ff0000000
+#define BM_28_38 BM_38_28
+#define BM_39_28 0x000000fff0000000
+#define BM_28_39 BM_39_28
+#define BM_40_28 0x000001fff0000000
+#define BM_28_40 BM_40_28
+#define BM_41_28 0x000003fff0000000
+#define BM_28_41 BM_41_28
+#define BM_42_28 0x000007fff0000000
+#define BM_28_42 BM_42_28
+#define BM_43_28 0x00000ffff0000000
+#define BM_28_43 BM_43_28
+#define BM_44_28 0x00001ffff0000000
+#define BM_28_44 BM_44_28
+#define BM_45_28 0x00003ffff0000000
+#define BM_28_45 BM_45_28
+#define BM_46_28 0x00007ffff0000000
+#define BM_28_46 BM_46_28
+#define BM_47_28 0x0000fffff0000000
+#define BM_28_47 BM_47_28
+#define BM_48_28 0x0001fffff0000000
+#define BM_28_48 BM_48_28
+#define BM_49_28 0x0003fffff0000000
+#define BM_28_49 BM_49_28
+#define BM_50_28 0x0007fffff0000000
+#define BM_28_50 BM_50_28
+#define BM_51_28 0x000ffffff0000000
+#define BM_28_51 BM_51_28
+#define BM_52_28 0x001ffffff0000000
+#define BM_28_52 BM_52_28
+#define BM_53_28 0x003ffffff0000000
+#define BM_28_53 BM_53_28
+#define BM_54_28 0x007ffffff0000000
+#define BM_28_54 BM_54_28
+#define BM_55_28 0x00fffffff0000000
+#define BM_28_55 BM_55_28
+#define BM_56_28 0x01fffffff0000000
+#define BM_28_56 BM_56_28
+#define BM_57_28 0x03fffffff0000000
+#define BM_28_57 BM_57_28
+#define BM_58_28 0x07fffffff0000000
+#define BM_28_58 BM_58_28
+#define BM_59_28 0x0ffffffff0000000
+#define BM_28_59 BM_59_28
+#define BM_60_28 0x1ffffffff0000000
+#define BM_28_60 BM_60_28
+#define BM_61_28 0x3ffffffff0000000
+#define BM_28_61 BM_61_28
+#define BM_62_28 0x7ffffffff0000000
+#define BM_28_62 BM_62_28
+#define BM_63_28 0xfffffffff0000000
+#define BM_28_63 BM_63_28
+#define BM_29_29 0x0000000020000000
+#define BM_30_29 0x0000000060000000
+#define BM_29_30 BM_30_29
+#define BM_31_29 0x00000000e0000000
+#define BM_29_31 BM_31_29
+#define BM_32_29 0x00000001e0000000
+#define BM_29_32 BM_32_29
+#define BM_33_29 0x00000003e0000000
+#define BM_29_33 BM_33_29
+#define BM_34_29 0x00000007e0000000
+#define BM_29_34 BM_34_29
+#define BM_35_29 0x0000000fe0000000
+#define BM_29_35 BM_35_29
+#define BM_36_29 0x0000001fe0000000
+#define BM_29_36 BM_36_29
+#define BM_37_29 0x0000003fe0000000
+#define BM_29_37 BM_37_29
+#define BM_38_29 0x0000007fe0000000
+#define BM_29_38 BM_38_29
+#define BM_39_29 0x000000ffe0000000
+#define BM_29_39 BM_39_29
+#define BM_40_29 0x000001ffe0000000
+#define BM_29_40 BM_40_29
+#define BM_41_29 0x000003ffe0000000
+#define BM_29_41 BM_41_29
+#define BM_42_29 0x000007ffe0000000
+#define BM_29_42 BM_42_29
+#define BM_43_29 0x00000fffe0000000
+#define BM_29_43 BM_43_29
+#define BM_44_29 0x00001fffe0000000
+#define BM_29_44 BM_44_29
+#define BM_45_29 0x00003fffe0000000
+#define BM_29_45 BM_45_29
+#define BM_46_29 0x00007fffe0000000
+#define BM_29_46 BM_46_29
+#define BM_47_29 0x0000ffffe0000000
+#define BM_29_47 BM_47_29
+#define BM_48_29 0x0001ffffe0000000
+#define BM_29_48 BM_48_29
+#define BM_49_29 0x0003ffffe0000000
+#define BM_29_49 BM_49_29
+#define BM_50_29 0x0007ffffe0000000
+#define BM_29_50 BM_50_29
+#define BM_51_29 0x000fffffe0000000
+#define BM_29_51 BM_51_29
+#define BM_52_29 0x001fffffe0000000
+#define BM_29_52 BM_52_29
+#define BM_53_29 0x003fffffe0000000
+#define BM_29_53 BM_53_29
+#define BM_54_29 0x007fffffe0000000
+#define BM_29_54 BM_54_29
+#define BM_55_29 0x00ffffffe0000000
+#define BM_29_55 BM_55_29
+#define BM_56_29 0x01ffffffe0000000
+#define BM_29_56 BM_56_29
+#define BM_57_29 0x03ffffffe0000000
+#define BM_29_57 BM_57_29
+#define BM_58_29 0x07ffffffe0000000
+#define BM_29_58 BM_58_29
+#define BM_59_29 0x0fffffffe0000000
+#define BM_29_59 BM_59_29
+#define BM_60_29 0x1fffffffe0000000
+#define BM_29_60 BM_60_29
+#define BM_61_29 0x3fffffffe0000000
+#define BM_29_61 BM_61_29
+#define BM_62_29 0x7fffffffe0000000
+#define BM_29_62 BM_62_29
+#define BM_63_29 0xffffffffe0000000
+#define BM_29_63 BM_63_29
+#define BM_30_30 0x0000000040000000
+#define BM_31_30 0x00000000c0000000
+#define BM_30_31 BM_31_30
+#define BM_32_30 0x00000001c0000000
+#define BM_30_32 BM_32_30
+#define BM_33_30 0x00000003c0000000
+#define BM_30_33 BM_33_30
+#define BM_34_30 0x00000007c0000000
+#define BM_30_34 BM_34_30
+#define BM_35_30 0x0000000fc0000000
+#define BM_30_35 BM_35_30
+#define BM_36_30 0x0000001fc0000000
+#define BM_30_36 BM_36_30
+#define BM_37_30 0x0000003fc0000000
+#define BM_30_37 BM_37_30
+#define BM_38_30 0x0000007fc0000000
+#define BM_30_38 BM_38_30
+#define BM_39_30 0x000000ffc0000000
+#define BM_30_39 BM_39_30
+#define BM_40_30 0x000001ffc0000000
+#define BM_30_40 BM_40_30
+#define BM_41_30 0x000003ffc0000000
+#define BM_30_41 BM_41_30
+#define BM_42_30 0x000007ffc0000000
+#define BM_30_42 BM_42_30
+#define BM_43_30 0x00000fffc0000000
+#define BM_30_43 BM_43_30
+#define BM_44_30 0x00001fffc0000000
+#define BM_30_44 BM_44_30
+#define BM_45_30 0x00003fffc0000000
+#define BM_30_45 BM_45_30
+#define BM_46_30 0x00007fffc0000000
+#define BM_30_46 BM_46_30
+#define BM_47_30 0x0000ffffc0000000
+#define BM_30_47 BM_47_30
+#define BM_48_30 0x0001ffffc0000000
+#define BM_30_48 BM_48_30
+#define BM_49_30 0x0003ffffc0000000
+#define BM_30_49 BM_49_30
+#define BM_50_30 0x0007ffffc0000000
+#define BM_30_50 BM_50_30
+#define BM_51_30 0x000fffffc0000000
+#define BM_30_51 BM_51_30
+#define BM_52_30 0x001fffffc0000000
+#define BM_30_52 BM_52_30
+#define BM_53_30 0x003fffffc0000000
+#define BM_30_53 BM_53_30
+#define BM_54_30 0x007fffffc0000000
+#define BM_30_54 BM_54_30
+#define BM_55_30 0x00ffffffc0000000
+#define BM_30_55 BM_55_30
+#define BM_56_30 0x01ffffffc0000000
+#define BM_30_56 BM_56_30
+#define BM_57_30 0x03ffffffc0000000
+#define BM_30_57 BM_57_30
+#define BM_58_30 0x07ffffffc0000000
+#define BM_30_58 BM_58_30
+#define BM_59_30 0x0fffffffc0000000
+#define BM_30_59 BM_59_30
+#define BM_60_30 0x1fffffffc0000000
+#define BM_30_60 BM_60_30
+#define BM_61_30 0x3fffffffc0000000
+#define BM_30_61 BM_61_30
+#define BM_62_30 0x7fffffffc0000000
+#define BM_30_62 BM_62_30
+#define BM_63_30 0xffffffffc0000000
+#define BM_30_63 BM_63_30
+#define BM_31_31 0x0000000080000000
+#define BM_32_31 0x0000000180000000
+#define BM_31_32 BM_32_31
+#define BM_33_31 0x0000000380000000
+#define BM_31_33 BM_33_31
+#define BM_34_31 0x0000000780000000
+#define BM_31_34 BM_34_31
+#define BM_35_31 0x0000000f80000000
+#define BM_31_35 BM_35_31
+#define BM_36_31 0x0000001f80000000
+#define BM_31_36 BM_36_31
+#define BM_37_31 0x0000003f80000000
+#define BM_31_37 BM_37_31
+#define BM_38_31 0x0000007f80000000
+#define BM_31_38 BM_38_31
+#define BM_39_31 0x000000ff80000000
+#define BM_31_39 BM_39_31
+#define BM_40_31 0x000001ff80000000
+#define BM_31_40 BM_40_31
+#define BM_41_31 0x000003ff80000000
+#define BM_31_41 BM_41_31
+#define BM_42_31 0x000007ff80000000
+#define BM_31_42 BM_42_31
+#define BM_43_31 0x00000fff80000000
+#define BM_31_43 BM_43_31
+#define BM_44_31 0x00001fff80000000
+#define BM_31_44 BM_44_31
+#define BM_45_31 0x00003fff80000000
+#define BM_31_45 BM_45_31
+#define BM_46_31 0x00007fff80000000
+#define BM_31_46 BM_46_31
+#define BM_47_31 0x0000ffff80000000
+#define BM_31_47 BM_47_31
+#define BM_48_31 0x0001ffff80000000
+#define BM_31_48 BM_48_31
+#define BM_49_31 0x0003ffff80000000
+#define BM_31_49 BM_49_31
+#define BM_50_31 0x0007ffff80000000
+#define BM_31_50 BM_50_31
+#define BM_51_31 0x000fffff80000000
+#define BM_31_51 BM_51_31
+#define BM_52_31 0x001fffff80000000
+#define BM_31_52 BM_52_31
+#define BM_53_31 0x003fffff80000000
+#define BM_31_53 BM_53_31
+#define BM_54_31 0x007fffff80000000
+#define BM_31_54 BM_54_31
+#define BM_55_31 0x00ffffff80000000
+#define BM_31_55 BM_55_31
+#define BM_56_31 0x01ffffff80000000
+#define BM_31_56 BM_56_31
+#define BM_57_31 0x03ffffff80000000
+#define BM_31_57 BM_57_31
+#define BM_58_31 0x07ffffff80000000
+#define BM_31_58 BM_58_31
+#define BM_59_31 0x0fffffff80000000
+#define BM_31_59 BM_59_31
+#define BM_60_31 0x1fffffff80000000
+#define BM_31_60 BM_60_31
+#define BM_61_31 0x3fffffff80000000
+#define BM_31_61 BM_61_31
+#define BM_62_31 0x7fffffff80000000
+#define BM_31_62 BM_62_31
+#define BM_63_31 0xffffffff80000000
+#define BM_31_63 BM_63_31
+#define BM_32_32 0x0000000100000000
+#define BM_33_32 0x0000000300000000
+#define BM_32_33 BM_33_32
+#define BM_34_32 0x0000000700000000
+#define BM_32_34 BM_34_32
+#define BM_35_32 0x0000000f00000000
+#define BM_32_35 BM_35_32
+#define BM_36_32 0x0000001f00000000
+#define BM_32_36 BM_36_32
+#define BM_37_32 0x0000003f00000000
+#define BM_32_37 BM_37_32
+#define BM_38_32 0x0000007f00000000
+#define BM_32_38 BM_38_32
+#define BM_39_32 0x000000ff00000000
+#define BM_32_39 BM_39_32
+#define BM_40_32 0x000001ff00000000
+#define BM_32_40 BM_40_32
+#define BM_41_32 0x000003ff00000000
+#define BM_32_41 BM_41_32
+#define BM_42_32 0x000007ff00000000
+#define BM_32_42 BM_42_32
+#define BM_43_32 0x00000fff00000000
+#define BM_32_43 BM_43_32
+#define BM_44_32 0x00001fff00000000
+#define BM_32_44 BM_44_32
+#define BM_45_32 0x00003fff00000000
+#define BM_32_45 BM_45_32
+#define BM_46_32 0x00007fff00000000
+#define BM_32_46 BM_46_32
+#define BM_47_32 0x0000ffff00000000
+#define BM_32_47 BM_47_32
+#define BM_48_32 0x0001ffff00000000
+#define BM_32_48 BM_48_32
+#define BM_49_32 0x0003ffff00000000
+#define BM_32_49 BM_49_32
+#define BM_50_32 0x0007ffff00000000
+#define BM_32_50 BM_50_32
+#define BM_51_32 0x000fffff00000000
+#define BM_32_51 BM_51_32
+#define BM_52_32 0x001fffff00000000
+#define BM_32_52 BM_52_32
+#define BM_53_32 0x003fffff00000000
+#define BM_32_53 BM_53_32
+#define BM_54_32 0x007fffff00000000
+#define BM_32_54 BM_54_32
+#define BM_55_32 0x00ffffff00000000
+#define BM_32_55 BM_55_32
+#define BM_56_32 0x01ffffff00000000
+#define BM_32_56 BM_56_32
+#define BM_57_32 0x03ffffff00000000
+#define BM_32_57 BM_57_32
+#define BM_58_32 0x07ffffff00000000
+#define BM_32_58 BM_58_32
+#define BM_59_32 0x0fffffff00000000
+#define BM_32_59 BM_59_32
+#define BM_60_32 0x1fffffff00000000
+#define BM_32_60 BM_60_32
+#define BM_61_32 0x3fffffff00000000
+#define BM_32_61 BM_61_32
+#define BM_62_32 0x7fffffff00000000
+#define BM_32_62 BM_62_32
+#define BM_63_32 0xffffffff00000000
+#define BM_32_63 BM_63_32
+#define BM_33_33 0x0000000200000000
+#define BM_34_33 0x0000000600000000
+#define BM_33_34 BM_34_33
+#define BM_35_33 0x0000000e00000000
+#define BM_33_35 BM_35_33
+#define BM_36_33 0x0000001e00000000
+#define BM_33_36 BM_36_33
+#define BM_37_33 0x0000003e00000000
+#define BM_33_37 BM_37_33
+#define BM_38_33 0x0000007e00000000
+#define BM_33_38 BM_38_33
+#define BM_39_33 0x000000fe00000000
+#define BM_33_39 BM_39_33
+#define BM_40_33 0x000001fe00000000
+#define BM_33_40 BM_40_33
+#define BM_41_33 0x000003fe00000000
+#define BM_33_41 BM_41_33
+#define BM_42_33 0x000007fe00000000
+#define BM_33_42 BM_42_33
+#define BM_43_33 0x00000ffe00000000
+#define BM_33_43 BM_43_33
+#define BM_44_33 0x00001ffe00000000
+#define BM_33_44 BM_44_33
+#define BM_45_33 0x00003ffe00000000
+#define BM_33_45 BM_45_33
+#define BM_46_33 0x00007ffe00000000
+#define BM_33_46 BM_46_33
+#define BM_47_33 0x0000fffe00000000
+#define BM_33_47 BM_47_33
+#define BM_48_33 0x0001fffe00000000
+#define BM_33_48 BM_48_33
+#define BM_49_33 0x0003fffe00000000
+#define BM_33_49 BM_49_33
+#define BM_50_33 0x0007fffe00000000
+#define BM_33_50 BM_50_33
+#define BM_51_33 0x000ffffe00000000
+#define BM_33_51 BM_51_33
+#define BM_52_33 0x001ffffe00000000
+#define BM_33_52 BM_52_33
+#define BM_53_33 0x003ffffe00000000
+#define BM_33_53 BM_53_33
+#define BM_54_33 0x007ffffe00000000
+#define BM_33_54 BM_54_33
+#define BM_55_33 0x00fffffe00000000
+#define BM_33_55 BM_55_33
+#define BM_56_33 0x01fffffe00000000
+#define BM_33_56 BM_56_33
+#define BM_57_33 0x03fffffe00000000
+#define BM_33_57 BM_57_33
+#define BM_58_33 0x07fffffe00000000
+#define BM_33_58 BM_58_33
+#define BM_59_33 0x0ffffffe00000000
+#define BM_33_59 BM_59_33
+#define BM_60_33 0x1ffffffe00000000
+#define BM_33_60 BM_60_33
+#define BM_61_33 0x3ffffffe00000000
+#define BM_33_61 BM_61_33
+#define BM_62_33 0x7ffffffe00000000
+#define BM_33_62 BM_62_33
+#define BM_63_33 0xfffffffe00000000
+#define BM_33_63 BM_63_33
+#define BM_34_34 0x0000000400000000
+#define BM_35_34 0x0000000c00000000
+#define BM_34_35 BM_35_34
+#define BM_36_34 0x0000001c00000000
+#define BM_34_36 BM_36_34
+#define BM_37_34 0x0000003c00000000
+#define BM_34_37 BM_37_34
+#define BM_38_34 0x0000007c00000000
+#define BM_34_38 BM_38_34
+#define BM_39_34 0x000000fc00000000
+#define BM_34_39 BM_39_34
+#define BM_40_34 0x000001fc00000000
+#define BM_34_40 BM_40_34
+#define BM_41_34 0x000003fc00000000
+#define BM_34_41 BM_41_34
+#define BM_42_34 0x000007fc00000000
+#define BM_34_42 BM_42_34
+#define BM_43_34 0x00000ffc00000000
+#define BM_34_43 BM_43_34
+#define BM_44_34 0x00001ffc00000000
+#define BM_34_44 BM_44_34
+#define BM_45_34 0x00003ffc00000000
+#define BM_34_45 BM_45_34
+#define BM_46_34 0x00007ffc00000000
+#define BM_34_46 BM_46_34
+#define BM_47_34 0x0000fffc00000000
+#define BM_34_47 BM_47_34
+#define BM_48_34 0x0001fffc00000000
+#define BM_34_48 BM_48_34
+#define BM_49_34 0x0003fffc00000000
+#define BM_34_49 BM_49_34
+#define BM_50_34 0x0007fffc00000000
+#define BM_34_50 BM_50_34
+#define BM_51_34 0x000ffffc00000000
+#define BM_34_51 BM_51_34
+#define BM_52_34 0x001ffffc00000000
+#define BM_34_52 BM_52_34
+#define BM_53_34 0x003ffffc00000000
+#define BM_34_53 BM_53_34
+#define BM_54_34 0x007ffffc00000000
+#define BM_34_54 BM_54_34
+#define BM_55_34 0x00fffffc00000000
+#define BM_34_55 BM_55_34
+#define BM_56_34 0x01fffffc00000000
+#define BM_34_56 BM_56_34
+#define BM_57_34 0x03fffffc00000000
+#define BM_34_57 BM_57_34
+#define BM_58_34 0x07fffffc00000000
+#define BM_34_58 BM_58_34
+#define BM_59_34 0x0ffffffc00000000
+#define BM_34_59 BM_59_34
+#define BM_60_34 0x1ffffffc00000000
+#define BM_34_60 BM_60_34
+#define BM_61_34 0x3ffffffc00000000
+#define BM_34_61 BM_61_34
+#define BM_62_34 0x7ffffffc00000000
+#define BM_34_62 BM_62_34
+#define BM_63_34 0xfffffffc00000000
+#define BM_34_63 BM_63_34
+#define BM_35_35 0x0000000800000000
+#define BM_36_35 0x0000001800000000
+#define BM_35_36 BM_36_35
+#define BM_37_35 0x0000003800000000
+#define BM_35_37 BM_37_35
+#define BM_38_35 0x0000007800000000
+#define BM_35_38 BM_38_35
+#define BM_39_35 0x000000f800000000
+#define BM_35_39 BM_39_35
+#define BM_40_35 0x000001f800000000
+#define BM_35_40 BM_40_35
+#define BM_41_35 0x000003f800000000
+#define BM_35_41 BM_41_35
+#define BM_42_35 0x000007f800000000
+#define BM_35_42 BM_42_35
+#define BM_43_35 0x00000ff800000000
+#define BM_35_43 BM_43_35
+#define BM_44_35 0x00001ff800000000
+#define BM_35_44 BM_44_35
+#define BM_45_35 0x00003ff800000000
+#define BM_35_45 BM_45_35
+#define BM_46_35 0x00007ff800000000
+#define BM_35_46 BM_46_35
+#define BM_47_35 0x0000fff800000000
+#define BM_35_47 BM_47_35
+#define BM_48_35 0x0001fff800000000
+#define BM_35_48 BM_48_35
+#define BM_49_35 0x0003fff800000000
+#define BM_35_49 BM_49_35
+#define BM_50_35 0x0007fff800000000
+#define BM_35_50 BM_50_35
+#define BM_51_35 0x000ffff800000000
+#define BM_35_51 BM_51_35
+#define BM_52_35 0x001ffff800000000
+#define BM_35_52 BM_52_35
+#define BM_53_35 0x003ffff800000000
+#define BM_35_53 BM_53_35
+#define BM_54_35 0x007ffff800000000
+#define BM_35_54 BM_54_35
+#define BM_55_35 0x00fffff800000000
+#define BM_35_55 BM_55_35
+#define BM_56_35 0x01fffff800000000
+#define BM_35_56 BM_56_35
+#define BM_57_35 0x03fffff800000000
+#define BM_35_57 BM_57_35
+#define BM_58_35 0x07fffff800000000
+#define BM_35_58 BM_58_35
+#define BM_59_35 0x0ffffff800000000
+#define BM_35_59 BM_59_35
+#define BM_60_35 0x1ffffff800000000
+#define BM_35_60 BM_60_35
+#define BM_61_35 0x3ffffff800000000
+#define BM_35_61 BM_61_35
+#define BM_62_35 0x7ffffff800000000
+#define BM_35_62 BM_62_35
+#define BM_63_35 0xfffffff800000000
+#define BM_35_63 BM_63_35
+#define BM_36_36 0x0000001000000000
+#define BM_37_36 0x0000003000000000
+#define BM_36_37 BM_37_36
+#define BM_38_36 0x0000007000000000
+#define BM_36_38 BM_38_36
+#define BM_39_36 0x000000f000000000
+#define BM_36_39 BM_39_36
+#define BM_40_36 0x000001f000000000
+#define BM_36_40 BM_40_36
+#define BM_41_36 0x000003f000000000
+#define BM_36_41 BM_41_36
+#define BM_42_36 0x000007f000000000
+#define BM_36_42 BM_42_36
+#define BM_43_36 0x00000ff000000000
+#define BM_36_43 BM_43_36
+#define BM_44_36 0x00001ff000000000
+#define BM_36_44 BM_44_36
+#define BM_45_36 0x00003ff000000000
+#define BM_36_45 BM_45_36
+#define BM_46_36 0x00007ff000000000
+#define BM_36_46 BM_46_36
+#define BM_47_36 0x0000fff000000000
+#define BM_36_47 BM_47_36
+#define BM_48_36 0x0001fff000000000
+#define BM_36_48 BM_48_36
+#define BM_49_36 0x0003fff000000000
+#define BM_36_49 BM_49_36
+#define BM_50_36 0x0007fff000000000
+#define BM_36_50 BM_50_36
+#define BM_51_36 0x000ffff000000000
+#define BM_36_51 BM_51_36
+#define BM_52_36 0x001ffff000000000
+#define BM_36_52 BM_52_36
+#define BM_53_36 0x003ffff000000000
+#define BM_36_53 BM_53_36
+#define BM_54_36 0x007ffff000000000
+#define BM_36_54 BM_54_36
+#define BM_55_36 0x00fffff000000000
+#define BM_36_55 BM_55_36
+#define BM_56_36 0x01fffff000000000
+#define BM_36_56 BM_56_36
+#define BM_57_36 0x03fffff000000000
+#define BM_36_57 BM_57_36
+#define BM_58_36 0x07fffff000000000
+#define BM_36_58 BM_58_36
+#define BM_59_36 0x0ffffff000000000
+#define BM_36_59 BM_59_36
+#define BM_60_36 0x1ffffff000000000
+#define BM_36_60 BM_60_36
+#define BM_61_36 0x3ffffff000000000
+#define BM_36_61 BM_61_36
+#define BM_62_36 0x7ffffff000000000
+#define BM_36_62 BM_62_36
+#define BM_63_36 0xfffffff000000000
+#define BM_36_63 BM_63_36
+#define BM_37_37 0x0000002000000000
+#define BM_38_37 0x0000006000000000
+#define BM_37_38 BM_38_37
+#define BM_39_37 0x000000e000000000
+#define BM_37_39 BM_39_37
+#define BM_40_37 0x000001e000000000
+#define BM_37_40 BM_40_37
+#define BM_41_37 0x000003e000000000
+#define BM_37_41 BM_41_37
+#define BM_42_37 0x000007e000000000
+#define BM_37_42 BM_42_37
+#define BM_43_37 0x00000fe000000000
+#define BM_37_43 BM_43_37
+#define BM_44_37 0x00001fe000000000
+#define BM_37_44 BM_44_37
+#define BM_45_37 0x00003fe000000000
+#define BM_37_45 BM_45_37
+#define BM_46_37 0x00007fe000000000
+#define BM_37_46 BM_46_37
+#define BM_47_37 0x0000ffe000000000
+#define BM_37_47 BM_47_37
+#define BM_48_37 0x0001ffe000000000
+#define BM_37_48 BM_48_37
+#define BM_49_37 0x0003ffe000000000
+#define BM_37_49 BM_49_37
+#define BM_50_37 0x0007ffe000000000
+#define BM_37_50 BM_50_37
+#define BM_51_37 0x000fffe000000000
+#define BM_37_51 BM_51_37
+#define BM_52_37 0x001fffe000000000
+#define BM_37_52 BM_52_37
+#define BM_53_37 0x003fffe000000000
+#define BM_37_53 BM_53_37
+#define BM_54_37 0x007fffe000000000
+#define BM_37_54 BM_54_37
+#define BM_55_37 0x00ffffe000000000
+#define BM_37_55 BM_55_37
+#define BM_56_37 0x01ffffe000000000
+#define BM_37_56 BM_56_37
+#define BM_57_37 0x03ffffe000000000
+#define BM_37_57 BM_57_37
+#define BM_58_37 0x07ffffe000000000
+#define BM_37_58 BM_58_37
+#define BM_59_37 0x0fffffe000000000
+#define BM_37_59 BM_59_37
+#define BM_60_37 0x1fffffe000000000
+#define BM_37_60 BM_60_37
+#define BM_61_37 0x3fffffe000000000
+#define BM_37_61 BM_61_37
+#define BM_62_37 0x7fffffe000000000
+#define BM_37_62 BM_62_37
+#define BM_63_37 0xffffffe000000000
+#define BM_37_63 BM_63_37
+#define BM_38_38 0x0000004000000000
+#define BM_39_38 0x000000c000000000
+#define BM_38_39 BM_39_38
+#define BM_40_38 0x000001c000000000
+#define BM_38_40 BM_40_38
+#define BM_41_38 0x000003c000000000
+#define BM_38_41 BM_41_38
+#define BM_42_38 0x000007c000000000
+#define BM_38_42 BM_42_38
+#define BM_43_38 0x00000fc000000000
+#define BM_38_43 BM_43_38
+#define BM_44_38 0x00001fc000000000
+#define BM_38_44 BM_44_38
+#define BM_45_38 0x00003fc000000000
+#define BM_38_45 BM_45_38
+#define BM_46_38 0x00007fc000000000
+#define BM_38_46 BM_46_38
+#define BM_47_38 0x0000ffc000000000
+#define BM_38_47 BM_47_38
+#define BM_48_38 0x0001ffc000000000
+#define BM_38_48 BM_48_38
+#define BM_49_38 0x0003ffc000000000
+#define BM_38_49 BM_49_38
+#define BM_50_38 0x0007ffc000000000
+#define BM_38_50 BM_50_38
+#define BM_51_38 0x000fffc000000000
+#define BM_38_51 BM_51_38
+#define BM_52_38 0x001fffc000000000
+#define BM_38_52 BM_52_38
+#define BM_53_38 0x003fffc000000000
+#define BM_38_53 BM_53_38
+#define BM_54_38 0x007fffc000000000
+#define BM_38_54 BM_54_38
+#define BM_55_38 0x00ffffc000000000
+#define BM_38_55 BM_55_38
+#define BM_56_38 0x01ffffc000000000
+#define BM_38_56 BM_56_38
+#define BM_57_38 0x03ffffc000000000
+#define BM_38_57 BM_57_38
+#define BM_58_38 0x07ffffc000000000
+#define BM_38_58 BM_58_38
+#define BM_59_38 0x0fffffc000000000
+#define BM_38_59 BM_59_38
+#define BM_60_38 0x1fffffc000000000
+#define BM_38_60 BM_60_38
+#define BM_61_38 0x3fffffc000000000
+#define BM_38_61 BM_61_38
+#define BM_62_38 0x7fffffc000000000
+#define BM_38_62 BM_62_38
+#define BM_63_38 0xffffffc000000000
+#define BM_38_63 BM_63_38
+#define BM_39_39 0x0000008000000000
+#define BM_40_39 0x0000018000000000
+#define BM_39_40 BM_40_39
+#define BM_41_39 0x0000038000000000
+#define BM_39_41 BM_41_39
+#define BM_42_39 0x0000078000000000
+#define BM_39_42 BM_42_39
+#define BM_43_39 0x00000f8000000000
+#define BM_39_43 BM_43_39
+#define BM_44_39 0x00001f8000000000
+#define BM_39_44 BM_44_39
+#define BM_45_39 0x00003f8000000000
+#define BM_39_45 BM_45_39
+#define BM_46_39 0x00007f8000000000
+#define BM_39_46 BM_46_39
+#define BM_47_39 0x0000ff8000000000
+#define BM_39_47 BM_47_39
+#define BM_48_39 0x0001ff8000000000
+#define BM_39_48 BM_48_39
+#define BM_49_39 0x0003ff8000000000
+#define BM_39_49 BM_49_39
+#define BM_50_39 0x0007ff8000000000
+#define BM_39_50 BM_50_39
+#define BM_51_39 0x000fff8000000000
+#define BM_39_51 BM_51_39
+#define BM_52_39 0x001fff8000000000
+#define BM_39_52 BM_52_39
+#define BM_53_39 0x003fff8000000000
+#define BM_39_53 BM_53_39
+#define BM_54_39 0x007fff8000000000
+#define BM_39_54 BM_54_39
+#define BM_55_39 0x00ffff8000000000
+#define BM_39_55 BM_55_39
+#define BM_56_39 0x01ffff8000000000
+#define BM_39_56 BM_56_39
+#define BM_57_39 0x03ffff8000000000
+#define BM_39_57 BM_57_39
+#define BM_58_39 0x07ffff8000000000
+#define BM_39_58 BM_58_39
+#define BM_59_39 0x0fffff8000000000
+#define BM_39_59 BM_59_39
+#define BM_60_39 0x1fffff8000000000
+#define BM_39_60 BM_60_39
+#define BM_61_39 0x3fffff8000000000
+#define BM_39_61 BM_61_39
+#define BM_62_39 0x7fffff8000000000
+#define BM_39_62 BM_62_39
+#define BM_63_39 0xffffff8000000000
+#define BM_39_63 BM_63_39
+#define BM_40_40 0x0000010000000000
+#define BM_41_40 0x0000030000000000
+#define BM_40_41 BM_41_40
+#define BM_42_40 0x0000070000000000
+#define BM_40_42 BM_42_40
+#define BM_43_40 0x00000f0000000000
+#define BM_40_43 BM_43_40
+#define BM_44_40 0x00001f0000000000
+#define BM_40_44 BM_44_40
+#define BM_45_40 0x00003f0000000000
+#define BM_40_45 BM_45_40
+#define BM_46_40 0x00007f0000000000
+#define BM_40_46 BM_46_40
+#define BM_47_40 0x0000ff0000000000
+#define BM_40_47 BM_47_40
+#define BM_48_40 0x0001ff0000000000
+#define BM_40_48 BM_48_40
+#define BM_49_40 0x0003ff0000000000
+#define BM_40_49 BM_49_40
+#define BM_50_40 0x0007ff0000000000
+#define BM_40_50 BM_50_40
+#define BM_51_40 0x000fff0000000000
+#define BM_40_51 BM_51_40
+#define BM_52_40 0x001fff0000000000
+#define BM_40_52 BM_52_40
+#define BM_53_40 0x003fff0000000000
+#define BM_40_53 BM_53_40
+#define BM_54_40 0x007fff0000000000
+#define BM_40_54 BM_54_40
+#define BM_55_40 0x00ffff0000000000
+#define BM_40_55 BM_55_40
+#define BM_56_40 0x01ffff0000000000
+#define BM_40_56 BM_56_40
+#define BM_57_40 0x03ffff0000000000
+#define BM_40_57 BM_57_40
+#define BM_58_40 0x07ffff0000000000
+#define BM_40_58 BM_58_40
+#define BM_59_40 0x0fffff0000000000
+#define BM_40_59 BM_59_40
+#define BM_60_40 0x1fffff0000000000
+#define BM_40_60 BM_60_40
+#define BM_61_40 0x3fffff0000000000
+#define BM_40_61 BM_61_40
+#define BM_62_40 0x7fffff0000000000
+#define BM_40_62 BM_62_40
+#define BM_63_40 0xffffff0000000000
+#define BM_40_63 BM_63_40
+#define BM_41_41 0x0000020000000000
+#define BM_42_41 0x0000060000000000
+#define BM_41_42 BM_42_41
+#define BM_43_41 0x00000e0000000000
+#define BM_41_43 BM_43_41
+#define BM_44_41 0x00001e0000000000
+#define BM_41_44 BM_44_41
+#define BM_45_41 0x00003e0000000000
+#define BM_41_45 BM_45_41
+#define BM_46_41 0x00007e0000000000
+#define BM_41_46 BM_46_41
+#define BM_47_41 0x0000fe0000000000
+#define BM_41_47 BM_47_41
+#define BM_48_41 0x0001fe0000000000
+#define BM_41_48 BM_48_41
+#define BM_49_41 0x0003fe0000000000
+#define BM_41_49 BM_49_41
+#define BM_50_41 0x0007fe0000000000
+#define BM_41_50 BM_50_41
+#define BM_51_41 0x000ffe0000000000
+#define BM_41_51 BM_51_41
+#define BM_52_41 0x001ffe0000000000
+#define BM_41_52 BM_52_41
+#define BM_53_41 0x003ffe0000000000
+#define BM_41_53 BM_53_41
+#define BM_54_41 0x007ffe0000000000
+#define BM_41_54 BM_54_41
+#define BM_55_41 0x00fffe0000000000
+#define BM_41_55 BM_55_41
+#define BM_56_41 0x01fffe0000000000
+#define BM_41_56 BM_56_41
+#define BM_57_41 0x03fffe0000000000
+#define BM_41_57 BM_57_41
+#define BM_58_41 0x07fffe0000000000
+#define BM_41_58 BM_58_41
+#define BM_59_41 0x0ffffe0000000000
+#define BM_41_59 BM_59_41
+#define BM_60_41 0x1ffffe0000000000
+#define BM_41_60 BM_60_41
+#define BM_61_41 0x3ffffe0000000000
+#define BM_41_61 BM_61_41
+#define BM_62_41 0x7ffffe0000000000
+#define BM_41_62 BM_62_41
+#define BM_63_41 0xfffffe0000000000
+#define BM_41_63 BM_63_41
+#define BM_42_42 0x0000040000000000
+#define BM_43_42 0x00000c0000000000
+#define BM_42_43 BM_43_42
+#define BM_44_42 0x00001c0000000000
+#define BM_42_44 BM_44_42
+#define BM_45_42 0x00003c0000000000
+#define BM_42_45 BM_45_42
+#define BM_46_42 0x00007c0000000000
+#define BM_42_46 BM_46_42
+#define BM_47_42 0x0000fc0000000000
+#define BM_42_47 BM_47_42
+#define BM_48_42 0x0001fc0000000000
+#define BM_42_48 BM_48_42
+#define BM_49_42 0x0003fc0000000000
+#define BM_42_49 BM_49_42
+#define BM_50_42 0x0007fc0000000000
+#define BM_42_50 BM_50_42
+#define BM_51_42 0x000ffc0000000000
+#define BM_42_51 BM_51_42
+#define BM_52_42 0x001ffc0000000000
+#define BM_42_52 BM_52_42
+#define BM_53_42 0x003ffc0000000000
+#define BM_42_53 BM_53_42
+#define BM_54_42 0x007ffc0000000000
+#define BM_42_54 BM_54_42
+#define BM_55_42 0x00fffc0000000000
+#define BM_42_55 BM_55_42
+#define BM_56_42 0x01fffc0000000000
+#define BM_42_56 BM_56_42
+#define BM_57_42 0x03fffc0000000000
+#define BM_42_57 BM_57_42
+#define BM_58_42 0x07fffc0000000000
+#define BM_42_58 BM_58_42
+#define BM_59_42 0x0ffffc0000000000
+#define BM_42_59 BM_59_42
+#define BM_60_42 0x1ffffc0000000000
+#define BM_42_60 BM_60_42
+#define BM_61_42 0x3ffffc0000000000
+#define BM_42_61 BM_61_42
+#define BM_62_42 0x7ffffc0000000000
+#define BM_42_62 BM_62_42
+#define BM_63_42 0xfffffc0000000000
+#define BM_42_63 BM_63_42
+#define BM_43_43 0x0000080000000000
+#define BM_44_43 0x0000180000000000
+#define BM_43_44 BM_44_43
+#define BM_45_43 0x0000380000000000
+#define BM_43_45 BM_45_43
+#define BM_46_43 0x0000780000000000
+#define BM_43_46 BM_46_43
+#define BM_47_43 0x0000f80000000000
+#define BM_43_47 BM_47_43
+#define BM_48_43 0x0001f80000000000
+#define BM_43_48 BM_48_43
+#define BM_49_43 0x0003f80000000000
+#define BM_43_49 BM_49_43
+#define BM_50_43 0x0007f80000000000
+#define BM_43_50 BM_50_43
+#define BM_51_43 0x000ff80000000000
+#define BM_43_51 BM_51_43
+#define BM_52_43 0x001ff80000000000
+#define BM_43_52 BM_52_43
+#define BM_53_43 0x003ff80000000000
+#define BM_43_53 BM_53_43
+#define BM_54_43 0x007ff80000000000
+#define BM_43_54 BM_54_43
+#define BM_55_43 0x00fff80000000000
+#define BM_43_55 BM_55_43
+#define BM_56_43 0x01fff80000000000
+#define BM_43_56 BM_56_43
+#define BM_57_43 0x03fff80000000000
+#define BM_43_57 BM_57_43
+#define BM_58_43 0x07fff80000000000
+#define BM_43_58 BM_58_43
+#define BM_59_43 0x0ffff80000000000
+#define BM_43_59 BM_59_43
+#define BM_60_43 0x1ffff80000000000
+#define BM_43_60 BM_60_43
+#define BM_61_43 0x3ffff80000000000
+#define BM_43_61 BM_61_43
+#define BM_62_43 0x7ffff80000000000
+#define BM_43_62 BM_62_43
+#define BM_63_43 0xfffff80000000000
+#define BM_43_63 BM_63_43
+#define BM_44_44 0x0000100000000000
+#define BM_45_44 0x0000300000000000
+#define BM_44_45 BM_45_44
+#define BM_46_44 0x0000700000000000
+#define BM_44_46 BM_46_44
+#define BM_47_44 0x0000f00000000000
+#define BM_44_47 BM_47_44
+#define BM_48_44 0x0001f00000000000
+#define BM_44_48 BM_48_44
+#define BM_49_44 0x0003f00000000000
+#define BM_44_49 BM_49_44
+#define BM_50_44 0x0007f00000000000
+#define BM_44_50 BM_50_44
+#define BM_51_44 0x000ff00000000000
+#define BM_44_51 BM_51_44
+#define BM_52_44 0x001ff00000000000
+#define BM_44_52 BM_52_44
+#define BM_53_44 0x003ff00000000000
+#define BM_44_53 BM_53_44
+#define BM_54_44 0x007ff00000000000
+#define BM_44_54 BM_54_44
+#define BM_55_44 0x00fff00000000000
+#define BM_44_55 BM_55_44
+#define BM_56_44 0x01fff00000000000
+#define BM_44_56 BM_56_44
+#define BM_57_44 0x03fff00000000000
+#define BM_44_57 BM_57_44
+#define BM_58_44 0x07fff00000000000
+#define BM_44_58 BM_58_44
+#define BM_59_44 0x0ffff00000000000
+#define BM_44_59 BM_59_44
+#define BM_60_44 0x1ffff00000000000
+#define BM_44_60 BM_60_44
+#define BM_61_44 0x3ffff00000000000
+#define BM_44_61 BM_61_44
+#define BM_62_44 0x7ffff00000000000
+#define BM_44_62 BM_62_44
+#define BM_63_44 0xfffff00000000000
+#define BM_44_63 BM_63_44
+#define BM_45_45 0x0000200000000000
+#define BM_46_45 0x0000600000000000
+#define BM_45_46 BM_46_45
+#define BM_47_45 0x0000e00000000000
+#define BM_45_47 BM_47_45
+#define BM_48_45 0x0001e00000000000
+#define BM_45_48 BM_48_45
+#define BM_49_45 0x0003e00000000000
+#define BM_45_49 BM_49_45
+#define BM_50_45 0x0007e00000000000
+#define BM_45_50 BM_50_45
+#define BM_51_45 0x000fe00000000000
+#define BM_45_51 BM_51_45
+#define BM_52_45 0x001fe00000000000
+#define BM_45_52 BM_52_45
+#define BM_53_45 0x003fe00000000000
+#define BM_45_53 BM_53_45
+#define BM_54_45 0x007fe00000000000
+#define BM_45_54 BM_54_45
+#define BM_55_45 0x00ffe00000000000
+#define BM_45_55 BM_55_45
+#define BM_56_45 0x01ffe00000000000
+#define BM_45_56 BM_56_45
+#define BM_57_45 0x03ffe00000000000
+#define BM_45_57 BM_57_45
+#define BM_58_45 0x07ffe00000000000
+#define BM_45_58 BM_58_45
+#define BM_59_45 0x0fffe00000000000
+#define BM_45_59 BM_59_45
+#define BM_60_45 0x1fffe00000000000
+#define BM_45_60 BM_60_45
+#define BM_61_45 0x3fffe00000000000
+#define BM_45_61 BM_61_45
+#define BM_62_45 0x7fffe00000000000
+#define BM_45_62 BM_62_45
+#define BM_63_45 0xffffe00000000000
+#define BM_45_63 BM_63_45
+#define BM_46_46 0x0000400000000000
+#define BM_47_46 0x0000c00000000000
+#define BM_46_47 BM_47_46
+#define BM_48_46 0x0001c00000000000
+#define BM_46_48 BM_48_46
+#define BM_49_46 0x0003c00000000000
+#define BM_46_49 BM_49_46
+#define BM_50_46 0x0007c00000000000
+#define BM_46_50 BM_50_46
+#define BM_51_46 0x000fc00000000000
+#define BM_46_51 BM_51_46
+#define BM_52_46 0x001fc00000000000
+#define BM_46_52 BM_52_46
+#define BM_53_46 0x003fc00000000000
+#define BM_46_53 BM_53_46
+#define BM_54_46 0x007fc00000000000
+#define BM_46_54 BM_54_46
+#define BM_55_46 0x00ffc00000000000
+#define BM_46_55 BM_55_46
+#define BM_56_46 0x01ffc00000000000
+#define BM_46_56 BM_56_46
+#define BM_57_46 0x03ffc00000000000
+#define BM_46_57 BM_57_46
+#define BM_58_46 0x07ffc00000000000
+#define BM_46_58 BM_58_46
+#define BM_59_46 0x0fffc00000000000
+#define BM_46_59 BM_59_46
+#define BM_60_46 0x1fffc00000000000
+#define BM_46_60 BM_60_46
+#define BM_61_46 0x3fffc00000000000
+#define BM_46_61 BM_61_46
+#define BM_62_46 0x7fffc00000000000
+#define BM_46_62 BM_62_46
+#define BM_63_46 0xffffc00000000000
+#define BM_46_63 BM_63_46
+#define BM_47_47 0x0000800000000000
+#define BM_48_47 0x0001800000000000
+#define BM_47_48 BM_48_47
+#define BM_49_47 0x0003800000000000
+#define BM_47_49 BM_49_47
+#define BM_50_47 0x0007800000000000
+#define BM_47_50 BM_50_47
+#define BM_51_47 0x000f800000000000
+#define BM_47_51 BM_51_47
+#define BM_52_47 0x001f800000000000
+#define BM_47_52 BM_52_47
+#define BM_53_47 0x003f800000000000
+#define BM_47_53 BM_53_47
+#define BM_54_47 0x007f800000000000
+#define BM_47_54 BM_54_47
+#define BM_55_47 0x00ff800000000000
+#define BM_47_55 BM_55_47
+#define BM_56_47 0x01ff800000000000
+#define BM_47_56 BM_56_47
+#define BM_57_47 0x03ff800000000000
+#define BM_47_57 BM_57_47
+#define BM_58_47 0x07ff800000000000
+#define BM_47_58 BM_58_47
+#define BM_59_47 0x0fff800000000000
+#define BM_47_59 BM_59_47
+#define BM_60_47 0x1fff800000000000
+#define BM_47_60 BM_60_47
+#define BM_61_47 0x3fff800000000000
+#define BM_47_61 BM_61_47
+#define BM_62_47 0x7fff800000000000
+#define BM_47_62 BM_62_47
+#define BM_63_47 0xffff800000000000
+#define BM_47_63 BM_63_47
+#define BM_48_48 0x0001000000000000
+#define BM_49_48 0x0003000000000000
+#define BM_48_49 BM_49_48
+#define BM_50_48 0x0007000000000000
+#define BM_48_50 BM_50_48
+#define BM_51_48 0x000f000000000000
+#define BM_48_51 BM_51_48
+#define BM_52_48 0x001f000000000000
+#define BM_48_52 BM_52_48
+#define BM_53_48 0x003f000000000000
+#define BM_48_53 BM_53_48
+#define BM_54_48 0x007f000000000000
+#define BM_48_54 BM_54_48
+#define BM_55_48 0x00ff000000000000
+#define BM_48_55 BM_55_48
+#define BM_56_48 0x01ff000000000000
+#define BM_48_56 BM_56_48
+#define BM_57_48 0x03ff000000000000
+#define BM_48_57 BM_57_48
+#define BM_58_48 0x07ff000000000000
+#define BM_48_58 BM_58_48
+#define BM_59_48 0x0fff000000000000
+#define BM_48_59 BM_59_48
+#define BM_60_48 0x1fff000000000000
+#define BM_48_60 BM_60_48
+#define BM_61_48 0x3fff000000000000
+#define BM_48_61 BM_61_48
+#define BM_62_48 0x7fff000000000000
+#define BM_48_62 BM_62_48
+#define BM_63_48 0xffff000000000000
+#define BM_48_63 BM_63_48
+#define BM_49_49 0x0002000000000000
+#define BM_50_49 0x0006000000000000
+#define BM_49_50 BM_50_49
+#define BM_51_49 0x000e000000000000
+#define BM_49_51 BM_51_49
+#define BM_52_49 0x001e000000000000
+#define BM_49_52 BM_52_49
+#define BM_53_49 0x003e000000000000
+#define BM_49_53 BM_53_49
+#define BM_54_49 0x007e000000000000
+#define BM_49_54 BM_54_49
+#define BM_55_49 0x00fe000000000000
+#define BM_49_55 BM_55_49
+#define BM_56_49 0x01fe000000000000
+#define BM_49_56 BM_56_49
+#define BM_57_49 0x03fe000000000000
+#define BM_49_57 BM_57_49
+#define BM_58_49 0x07fe000000000000
+#define BM_49_58 BM_58_49
+#define BM_59_49 0x0ffe000000000000
+#define BM_49_59 BM_59_49
+#define BM_60_49 0x1ffe000000000000
+#define BM_49_60 BM_60_49
+#define BM_61_49 0x3ffe000000000000
+#define BM_49_61 BM_61_49
+#define BM_62_49 0x7ffe000000000000
+#define BM_49_62 BM_62_49
+#define BM_63_49 0xfffe000000000000
+#define BM_49_63 BM_63_49
+#define BM_50_50 0x0004000000000000
+#define BM_51_50 0x000c000000000000
+#define BM_50_51 BM_51_50
+#define BM_52_50 0x001c000000000000
+#define BM_50_52 BM_52_50
+#define BM_53_50 0x003c000000000000
+#define BM_50_53 BM_53_50
+#define BM_54_50 0x007c000000000000
+#define BM_50_54 BM_54_50
+#define BM_55_50 0x00fc000000000000
+#define BM_50_55 BM_55_50
+#define BM_56_50 0x01fc000000000000
+#define BM_50_56 BM_56_50
+#define BM_57_50 0x03fc000000000000
+#define BM_50_57 BM_57_50
+#define BM_58_50 0x07fc000000000000
+#define BM_50_58 BM_58_50
+#define BM_59_50 0x0ffc000000000000
+#define BM_50_59 BM_59_50
+#define BM_60_50 0x1ffc000000000000
+#define BM_50_60 BM_60_50
+#define BM_61_50 0x3ffc000000000000
+#define BM_50_61 BM_61_50
+#define BM_62_50 0x7ffc000000000000
+#define BM_50_62 BM_62_50
+#define BM_63_50 0xfffc000000000000
+#define BM_50_63 BM_63_50
+#define BM_51_51 0x0008000000000000
+#define BM_52_51 0x0018000000000000
+#define BM_51_52 BM_52_51
+#define BM_53_51 0x0038000000000000
+#define BM_51_53 BM_53_51
+#define BM_54_51 0x0078000000000000
+#define BM_51_54 BM_54_51
+#define BM_55_51 0x00f8000000000000
+#define BM_51_55 BM_55_51
+#define BM_56_51 0x01f8000000000000
+#define BM_51_56 BM_56_51
+#define BM_57_51 0x03f8000000000000
+#define BM_51_57 BM_57_51
+#define BM_58_51 0x07f8000000000000
+#define BM_51_58 BM_58_51
+#define BM_59_51 0x0ff8000000000000
+#define BM_51_59 BM_59_51
+#define BM_60_51 0x1ff8000000000000
+#define BM_51_60 BM_60_51
+#define BM_61_51 0x3ff8000000000000
+#define BM_51_61 BM_61_51
+#define BM_62_51 0x7ff8000000000000
+#define BM_51_62 BM_62_51
+#define BM_63_51 0xfff8000000000000
+#define BM_51_63 BM_63_51
+#define BM_52_52 0x0010000000000000
+#define BM_53_52 0x0030000000000000
+#define BM_52_53 BM_53_52
+#define BM_54_52 0x0070000000000000
+#define BM_52_54 BM_54_52
+#define BM_55_52 0x00f0000000000000
+#define BM_52_55 BM_55_52
+#define BM_56_52 0x01f0000000000000
+#define BM_52_56 BM_56_52
+#define BM_57_52 0x03f0000000000000
+#define BM_52_57 BM_57_52
+#define BM_58_52 0x07f0000000000000
+#define BM_52_58 BM_58_52
+#define BM_59_52 0x0ff0000000000000
+#define BM_52_59 BM_59_52
+#define BM_60_52 0x1ff0000000000000
+#define BM_52_60 BM_60_52
+#define BM_61_52 0x3ff0000000000000
+#define BM_52_61 BM_61_52
+#define BM_62_52 0x7ff0000000000000
+#define BM_52_62 BM_62_52
+#define BM_63_52 0xfff0000000000000
+#define BM_52_63 BM_63_52
+#define BM_53_53 0x0020000000000000
+#define BM_54_53 0x0060000000000000
+#define BM_53_54 BM_54_53
+#define BM_55_53 0x00e0000000000000
+#define BM_53_55 BM_55_53
+#define BM_56_53 0x01e0000000000000
+#define BM_53_56 BM_56_53
+#define BM_57_53 0x03e0000000000000
+#define BM_53_57 BM_57_53
+#define BM_58_53 0x07e0000000000000
+#define BM_53_58 BM_58_53
+#define BM_59_53 0x0fe0000000000000
+#define BM_53_59 BM_59_53
+#define BM_60_53 0x1fe0000000000000
+#define BM_53_60 BM_60_53
+#define BM_61_53 0x3fe0000000000000
+#define BM_53_61 BM_61_53
+#define BM_62_53 0x7fe0000000000000
+#define BM_53_62 BM_62_53
+#define BM_63_53 0xffe0000000000000
+#define BM_53_63 BM_63_53
+#define BM_54_54 0x0040000000000000
+#define BM_55_54 0x00c0000000000000
+#define BM_54_55 BM_55_54
+#define BM_56_54 0x01c0000000000000
+#define BM_54_56 BM_56_54
+#define BM_57_54 0x03c0000000000000
+#define BM_54_57 BM_57_54
+#define BM_58_54 0x07c0000000000000
+#define BM_54_58 BM_58_54
+#define BM_59_54 0x0fc0000000000000
+#define BM_54_59 BM_59_54
+#define BM_60_54 0x1fc0000000000000
+#define BM_54_60 BM_60_54
+#define BM_61_54 0x3fc0000000000000
+#define BM_54_61 BM_61_54
+#define BM_62_54 0x7fc0000000000000
+#define BM_54_62 BM_62_54
+#define BM_63_54 0xffc0000000000000
+#define BM_54_63 BM_63_54
+#define BM_55_55 0x0080000000000000
+#define BM_56_55 0x0180000000000000
+#define BM_55_56 BM_56_55
+#define BM_57_55 0x0380000000000000
+#define BM_55_57 BM_57_55
+#define BM_58_55 0x0780000000000000
+#define BM_55_58 BM_58_55
+#define BM_59_55 0x0f80000000000000
+#define BM_55_59 BM_59_55
+#define BM_60_55 0x1f80000000000000
+#define BM_55_60 BM_60_55
+#define BM_61_55 0x3f80000000000000
+#define BM_55_61 BM_61_55
+#define BM_62_55 0x7f80000000000000
+#define BM_55_62 BM_62_55
+#define BM_63_55 0xff80000000000000
+#define BM_55_63 BM_63_55
+#define BM_56_56 0x0100000000000000
+#define BM_57_56 0x0300000000000000
+#define BM_56_57 BM_57_56
+#define BM_58_56 0x0700000000000000
+#define BM_56_58 BM_58_56
+#define BM_59_56 0x0f00000000000000
+#define BM_56_59 BM_59_56
+#define BM_60_56 0x1f00000000000000
+#define BM_56_60 BM_60_56
+#define BM_61_56 0x3f00000000000000
+#define BM_56_61 BM_61_56
+#define BM_62_56 0x7f00000000000000
+#define BM_56_62 BM_62_56
+#define BM_63_56 0xff00000000000000
+#define BM_56_63 BM_63_56
+#define BM_57_57 0x0200000000000000
+#define BM_58_57 0x0600000000000000
+#define BM_57_58 BM_58_57
+#define BM_59_57 0x0e00000000000000
+#define BM_57_59 BM_59_57
+#define BM_60_57 0x1e00000000000000
+#define BM_57_60 BM_60_57
+#define BM_61_57 0x3e00000000000000
+#define BM_57_61 BM_61_57
+#define BM_62_57 0x7e00000000000000
+#define BM_57_62 BM_62_57
+#define BM_63_57 0xfe00000000000000
+#define BM_57_63 BM_63_57
+#define BM_58_58 0x0400000000000000
+#define BM_59_58 0x0c00000000000000
+#define BM_58_59 BM_59_58
+#define BM_60_58 0x1c00000000000000
+#define BM_58_60 BM_60_58
+#define BM_61_58 0x3c00000000000000
+#define BM_58_61 BM_61_58
+#define BM_62_58 0x7c00000000000000
+#define BM_58_62 BM_62_58
+#define BM_63_58 0xfc00000000000000
+#define BM_58_63 BM_63_58
+#define BM_59_59 0x0800000000000000
+#define BM_60_59 0x1800000000000000
+#define BM_59_60 BM_60_59
+#define BM_61_59 0x3800000000000000
+#define BM_59_61 BM_61_59
+#define BM_62_59 0x7800000000000000
+#define BM_59_62 BM_62_59
+#define BM_63_59 0xf800000000000000
+#define BM_59_63 BM_63_59
+#define BM_60_60 0x1000000000000000
+#define BM_61_60 0x3000000000000000
+#define BM_60_61 BM_61_60
+#define BM_62_60 0x7000000000000000
+#define BM_60_62 BM_62_60
+#define BM_63_60 0xf000000000000000
+#define BM_60_63 BM_63_60
+#define BM_61_61 0x2000000000000000
+#define BM_62_61 0x6000000000000000
+#define BM_61_62 BM_62_61
+#define BM_63_61 0xe000000000000000
+#define BM_61_63 BM_63_61
+#define BM_62_62 0x4000000000000000
+#define BM_63_62 0xc000000000000000
+#define BM_62_63 BM_63_62
+#define BM_63_63 0x8000000000000000
+
+#endif
+
+#endif /* __ASM_TX4927_TX4927_MIPS_H */
diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h
new file mode 100644
index 000000000000..170433492246
--- /dev/null
+++ b/include/asm-mips/tx4927/tx4927_pci.h
@@ -0,0 +1,275 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#ifndef __ASM_TX4927_TX4927_PCI_H 
+#define __ASM_TX4927_TX4927_PCI_H 
+
+#define TX4927_CCFG_TOE 0x00004000
+
+#define TX4927_PCIMEM      0x08000000
+#define TX4927_PCIMEM_SIZE 0x08000000
+#define TX4927_PCIIO       0x16000000
+#define TX4927_PCIIO_SIZE  0x01000000
+
+#define TX4927_SDRAMC_REG       0xff1f8000
+#define TX4927_EBUSC_REG        0xff1f9000
+#define TX4927_PCIC_REG         0xff1fd000
+#define TX4927_CCFG_REG         0xff1fe000
+#define TX4927_IRC_REG          0xff1ff600
+#define TX4927_CE3      0x17f00000      /* 1M */
+#define TX4927_PCIRESET_ADDR    0xbc00f006
+#define TX4927_PCI_CLK_ADDR     (KSEG1 + TX4927_CE3 + 0x00040020)
+
+#define TX4927_IMSTAT_ADDR(n)   (KSEG1 + TX4927_CE3 + 0x0004001a + (n))
+#define tx4927_imstat_ptr(n)    \
+        ((volatile unsigned char *)TX4927_IMSTAT_ADDR(n))
+
+/* bits for ISTAT3/IMASK3/IMSTAT3 */
+#define TX4927_INT3B_PCID       0
+#define TX4927_INT3B_PCIC       1
+#define TX4927_INT3B_PCIB       2
+#define TX4927_INT3B_PCIA       3
+#define TX4927_INT3F_PCID       (1 << TX4927_INT3B_PCID)
+#define TX4927_INT3F_PCIC       (1 << TX4927_INT3B_PCIC)
+#define TX4927_INT3F_PCIB       (1 << TX4927_INT3B_PCIB)
+#define TX4927_INT3F_PCIA       (1 << TX4927_INT3B_PCIA)
+
+/* bits for PCI_CLK (S6) */
+#define TX4927_PCI_CLK_HOST     0x80
+#define TX4927_PCI_CLK_MASK     (0x0f << 3)
+#define TX4927_PCI_CLK_33       (0x01 << 3)
+#define TX4927_PCI_CLK_25       (0x04 << 3)
+#define TX4927_PCI_CLK_66       (0x09 << 3)
+#define TX4927_PCI_CLK_50       (0x0c << 3)
+#define TX4927_PCI_CLK_ACK      0x04
+#define TX4927_PCI_CLK_ACE      0x02
+#define TX4927_PCI_CLK_ENDIAN   0x01
+#define TX4927_NR_IRQ_LOCAL     (8+16)
+#define TX4927_NR_IRQ_IRC       32      /* On-Chip IRC */
+
+#define TX4927_IR_PCIC  	16
+#define TX4927_IR_PCIERR        22
+#define TX4927_IR_PCIPMA        23
+#define TX4927_IRQ_IRC_PCIC     (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC)
+#define TX4927_IRQ_IRC_PCIERR   (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR)
+#define TX4927_IRQ_IOC1         (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC)
+#define TX4927_IRQ_IOC_PCID     (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID)
+#define TX4927_IRQ_IOC_PCIC     (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC)
+#define TX4927_IRQ_IOC_PCIB     (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB)
+#define TX4927_IRQ_IOC_PCIA     (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA)
+
+#ifdef _LANGUAGE_ASSEMBLY
+#define _CONST64(c)     c
+#else
+#define _CONST64(c)     c##ull
+
+#include <asm/byteorder.h>
+
+#define tx4927_pcireset_ptr     \
+        ((volatile unsigned char *)TX4927_PCIRESET_ADDR)
+#define tx4927_pci_clk_ptr      \
+        ((volatile unsigned char *)TX4927_PCI_CLK_ADDR)
+
+struct tx4927_sdramc_reg {
+        volatile unsigned long long cr[4];
+        volatile unsigned long long unused0[4];
+        volatile unsigned long long tr;
+        volatile unsigned long long unused1[2];
+        volatile unsigned long long cmd;
+};
+
+struct tx4927_ebusc_reg {
+        volatile unsigned long long cr[8];
+};
+
+struct tx4927_ccfg_reg {
+        volatile unsigned long long ccfg;
+        volatile unsigned long long crir;
+        volatile unsigned long long pcfg;
+        volatile unsigned long long tear;
+        volatile unsigned long long clkctr;
+        volatile unsigned long long unused0;
+        volatile unsigned long long garbc;
+        volatile unsigned long long unused1;
+        volatile unsigned long long unused2;
+        volatile unsigned long long ramp;
+};
+
+struct tx4927_irc_reg {
+        volatile unsigned long cer;
+        volatile unsigned long cr[2];
+        volatile unsigned long unused0;
+        volatile unsigned long ilr[8];
+        volatile unsigned long unused1[4];
+        volatile unsigned long imr;
+        volatile unsigned long unused2[7];
+        volatile unsigned long scr;
+        volatile unsigned long unused3[7];
+        volatile unsigned long ssr;
+        volatile unsigned long unused4[7];
+        volatile unsigned long csr;
+};
+
+struct tx4927_pcic_reg {
+        volatile unsigned long pciid;
+        volatile unsigned long pcistatus;
+        volatile unsigned long pciccrev;
+        volatile unsigned long pcicfg1;
+        volatile unsigned long p2gm0plbase;             /* +10 */
+        volatile unsigned long p2gm0pubase;
+        volatile unsigned long p2gm1plbase;
+        volatile unsigned long p2gm1pubase;
+        volatile unsigned long p2gm2pbase;              /* +20 */
+        volatile unsigned long p2giopbase;
+        volatile unsigned long unused0;
+        volatile unsigned long pcisid;
+        volatile unsigned long unused1;         /* +30 */
+        volatile unsigned long pcicapptr;
+        volatile unsigned long unused2;
+        volatile unsigned long pcicfg2;
+        volatile unsigned long g2ptocnt;                /* +40 */
+        volatile unsigned long unused3[15];
+        volatile unsigned long g2pstatus;               /* +80 */
+        volatile unsigned long g2pmask;
+        volatile unsigned long pcisstatus;
+        volatile unsigned long pcimask;
+        volatile unsigned long p2gcfg;          /* +90 */
+        volatile unsigned long p2gstatus;
+        volatile unsigned long p2gmask;
+        volatile unsigned long p2gccmd;
+        volatile unsigned long unused4[24];             /* +a0 */
+        volatile unsigned long pbareqport;              /* +100 */
+        volatile unsigned long pbacfg;
+        volatile unsigned long pbastatus;
+        volatile unsigned long pbamask;
+        volatile unsigned long pbabm;           /* +110 */
+        volatile unsigned long pbacreq;
+        volatile unsigned long pbacgnt;
+        volatile unsigned long pbacstate;
+        volatile unsigned long long g2pmgbase[3];               /* +120 */
+        volatile unsigned long long g2piogbase;
+        volatile unsigned long g2pmmask[3];             /* +140 */
+        volatile unsigned long g2piomask;
+        volatile unsigned long long g2pmpbase[3];               /* +150 */
+        volatile unsigned long long g2piopbase;
+        volatile unsigned long pciccfg;         /* +170 */
+        volatile unsigned long pcicstatus;
+        volatile unsigned long pcicmask;
+        volatile unsigned long unused5;
+        volatile unsigned long long p2gmgbase[3];               /* +180 */
+        volatile unsigned long long p2giogbase;
+        volatile unsigned long g2pcfgadrs;              /* +1a0 */
+        volatile unsigned long g2pcfgdata;
+        volatile unsigned long unused6[8];
+        volatile unsigned long g2pintack;
+        volatile unsigned long g2pspc;
+        volatile unsigned long unused7[12];             /* +1d0 */
+        volatile unsigned long long pdmca;              /* +200 */
+        volatile unsigned long long pdmga;
+        volatile unsigned long long pdmpa;
+        volatile unsigned long long pdmcut;
+        volatile unsigned long long pdmcnt;             /* +220 */
+        volatile unsigned long long pdmsts;
+        volatile unsigned long long unused8[2];
+        volatile unsigned long long pdmdb[4];           /* +240 */
+        volatile unsigned long long pdmtdh;             /* +260 */
+        volatile unsigned long long pdmdms;
+};
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+/* IRCSR : Int. Current Status */
+#define TX4927_IRCSR_IF         0x00010000
+#define TX4927_IRCSR_ILV_MASK   0x00000700
+#define TX4927_IRCSR_IVL_MASK   0x0000001f
+
+/*
+ * PCIC
+ */
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4927_PCIC_G2PSTATUS_ALL       0x00000003
+#define TX4927_PCIC_G2PSTATUS_TTOE      0x00000002
+#define TX4927_PCIC_G2PSTATUS_RTOE      0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX4927_PCIC_PCISTATUS_ALL       0x0000f900
+
+/* bits for PBACFG */
+#define TX4927_PCIC_PBACFG_RPBA 0x00000004
+#define TX4927_PCIC_PBACFG_PBAEN        0x00000002
+#define TX4927_PCIC_PBACFG_BMCEN        0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4927_PCIC_G2PMnGBASE_BSDIS    _CONST64(0x0000002000000000)
+#define TX4927_PCIC_G2PMnGBASE_ECHG     _CONST64(0x0000001000000000)
+
+/* bits for G2PIOGBASE */
+#define TX4927_PCIC_G2PIOGBASE_BSDIS    _CONST64(0x0000002000000000)
+#define TX4927_PCIC_G2PIOGBASE_ECHG     _CONST64(0x0000001000000000)
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4927_PCIC_PCICSTATUS_ALL      0x000007dc
+
+/* bits for PCICCFG */
+#define TX4927_PCIC_PCICCFG_LBWC_MASK   0x0fff0000
+#define TX4927_PCIC_PCICCFG_HRST        0x00000800
+#define TX4927_PCIC_PCICCFG_SRST        0x00000400
+#define TX4927_PCIC_PCICCFG_IRBER       0x00000200
+#define TX4927_PCIC_PCICCFG_IMSE0       0x00000100
+#define TX4927_PCIC_PCICCFG_IMSE1       0x00000080
+#define TX4927_PCIC_PCICCFG_IMSE2       0x00000040
+#define TX4927_PCIC_PCICCFG_IISE        0x00000020
+#define TX4927_PCIC_PCICCFG_ATR 0x00000010
+#define TX4927_PCIC_PCICCFG_ICAE        0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4927_PCIC_P2GMnGBASE_TMEMEN   _CONST64(0x0000004000000000)
+#define TX4927_PCIC_P2GMnGBASE_TBSDIS   _CONST64(0x0000002000000000)
+#define TX4927_PCIC_P2GMnGBASE_TECHG    _CONST64(0x0000001000000000)
+
+/* bits for P2GIOGBASE */
+#define TX4927_PCIC_P2GIOGBASE_TIOEN    _CONST64(0x0000004000000000)
+#define TX4927_PCIC_P2GIOGBASE_TBSDIS   _CONST64(0x0000002000000000)
+#define TX4927_PCIC_P2GIOGBASE_TECHG    _CONST64(0x0000001000000000)
+
+#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad)        ((ad) - 11)
+#define TX4927_PCIC_MAX_DEVNU   TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4927_CCFG_PCI66       0x00800000
+#define TX4927_CCFG_PCIMIDE     0x00400000
+#define TX4927_CCFG_PCIXARB     0x00002000
+#define TX4927_CCFG_PCIDIVMODE_MASK     0x00001800
+#define TX4927_CCFG_PCIDIVMODE_2_5      0x00000000
+#define TX4927_CCFG_PCIDIVMODE_3        0x00000800
+#define TX4927_CCFG_PCIDIVMODE_5        0x00001000
+#define TX4927_CCFG_PCIDIVMODE_6        0x00001800
+
+/* PCFG : Pin Configuration */
+#define TX4927_PCFG_PCICLKEN_ALL        0x003f0000
+#define TX4927_PCFG_PCICLKEN(ch)        (0x00010000<<(ch))
+
+/* CLKCTR : Clock Control */
+#define TX4927_CLKCTR_PCICKD    0x00400000
+#define TX4927_CLKCTR_PCIRST    0x00000040
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#define tx4927_sdramcptr        ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG)
+#define tx4927_pcicptr          ((struct tx4927_pcic_reg *)TX4927_PCIC_REG)
+#define tx4927_ccfgptr          ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG)
+#define tx4927_ebuscptr         ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG)
+#define tx4927_ircptr           ((struct tx4927_irc_reg *)TX4927_IRC_REG)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#endif /* __ASM_TX4927_TX4927_PCI_H */
diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h
new file mode 100644
index 000000000000..d2f0c76b00a9
--- /dev/null
+++ b/include/asm-mips/types.h
@@ -0,0 +1,108 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if (_MIPS_SZLONG == 64)
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#else
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG _MIPS_SZLONG
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef __signed char s8;
+typedef unsigned char u8;
+
+typedef __signed short s16;
+typedef unsigned short u16;
+
+typedef __signed int s32;
+typedef unsigned int u32;
+
+#if (_MIPS_SZLONG == 64)
+
+typedef __signed__ long s64;
+typedef unsigned long u64;
+
+#else
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+#endif
+
+#endif
+
+#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
+    || defined(CONFIG_MIPS64)
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+/*
+ * Don't use phys_t.  You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h
new file mode 100644
index 000000000000..07114898e065
--- /dev/null
+++ b/include/asm-mips/uaccess.h
@@ -0,0 +1,830 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <asm-generic/uaccess.h>
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#ifdef CONFIG_MIPS32
+
+#define __UA_LIMIT	0x80000000UL
+
+#define __UA_ADDR	".word"
+#define __UA_LA		"la"
+#define __UA_ADDU	"addu"
+#define __UA_t0		"$8"
+#define __UA_t1		"$9"
+
+#endif /* CONFIG_MIPS32 */
+
+#ifdef CONFIG_MIPS64
+
+#define __UA_LIMIT	(- TASK_SIZE)
+
+#define __UA_ADDR	".dword"
+#define __UA_LA		"dla"
+#define __UA_ADDU	"daddu"
+#define __UA_t0		"$12"
+#define __UA_t1		"$13"
+
+#endif /* CONFIG_MIPS64 */
+
+/*
+ * USER_DS is a bitmask that has the bits set that may not be set in a valid
+ * userspace address.  Note that we limit 32-bit userspace to 0x7fff8000 but
+ * the arithmetic we're doing only works if the limit is a power of two, so
+ * we use 0x80000000 here on 32-bit kernels.  If a process passes an invalid
+ * address in this range it's the process's problem, not ours :-)
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0UL })
+#define USER_DS		((mm_segment_t) { __UA_LIMIT })
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+
+/*
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
+ */
+#define __ua_size(size)							\
+	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_mask get_fs().seg
+
+#define __access_ok(addr, size, mask)					\
+	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size)					\
+	likely(__access_ok((unsigned long)(addr), (size),__access_mask))
+
+/*
+ * verify_area: - Obsolete/deprecated and will go away soon,
+ * use access_ok() instead.
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This function has been replaced by access_ok().
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns zero if the memory block may be valid, -EFAULT
+ * if it is definitely invalid.
+ *
+ * See access_ok() for more details.
+ */
+static inline int __deprecated verify_area(int type, const void * addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)	\
+	__put_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+	__get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+	__put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+	__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef __mips64
+#define __GET_USER_DW(__gu_err) __get_user_asm("ld", __gu_err)
+#else
+#define __GET_USER_DW(__gu_err) __get_user_asm_ll32(__gu_err)
+#endif
+
+#define __get_user_nocheck(x,ptr,size)					\
+({									\
+	__typeof(*(ptr)) __gu_val = 0;					\
+	long __gu_addr;							\
+	long __gu_err = 0;						\
+									\
+	might_sleep();							\
+	__gu_addr = (long) (ptr);					\
+	switch (size) {							\
+	case 1: __get_user_asm("lb", __gu_err); break;			\
+	case 2: __get_user_asm("lh", __gu_err); break;			\
+	case 4: __get_user_asm("lw", __gu_err); break;			\
+	case 8: __GET_USER_DW(__gu_err); break;				\
+	default: __get_user_unknown(); break;				\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	__typeof__(*(ptr)) __gu_val = 0;				\
+	long __gu_addr;							\
+	long __gu_err;							\
+									\
+	might_sleep();							\
+	__gu_addr = (long) (ptr);					\
+	__gu_err = access_ok(VERIFY_READ, (void *) __gu_addr, size)	\
+				? 0 : -EFAULT;				\
+									\
+	if (likely(!__gu_err)) {					\
+		switch (size) {						\
+		case 1: __get_user_asm("lb", __gu_err); break;		\
+		case 2: __get_user_asm("lh", __gu_err); break;		\
+		case 4: __get_user_asm("lw", __gu_err); break;		\
+		case 8: __GET_USER_DW(__gu_err); break;			\
+		default: __get_user_unknown(); break;			\
+		}							\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_asm(insn,__gu_err)					\
+({									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%1, %3				\n"	\
+	"2:							\n"	\
+	"	.section .fixup,\"ax\"				\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section __ex_table,\"a\"			\n"	\
+	"	"__UA_ADDR "\t1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=r" (__gu_val)				\
+	: "0" (__gu_err), "o" (__m(__gu_addr)), "i" (-EFAULT));		\
+})
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_asm_ll32(__gu_err)					\
+({									\
+	__asm__ __volatile__(						\
+	"1:	lw	%1, %3					\n"	\
+	"2:	lw	%D1, %4					\n"	\
+	"	move	%0, $0					\n"	\
+	"3:	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %5					\n"	\
+	"	move	%1, $0					\n"	\
+	"	move	%D1, $0					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=&r" (__gu_val)				\
+	: "0" (__gu_err), "o" (__m(__gu_addr)),				\
+	  "o" (__m(__gu_addr + 4)), "i" (-EFAULT));			\
+})
+
+extern void __get_user_unknown(void);
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef __mips64
+#define __PUT_USER_DW(__pu_val) __put_user_asm("sd", __pu_val)
+#else
+#define __PUT_USER_DW(__pu_val) __put_user_asm_ll32(__pu_val)
+#endif
+
+#define __put_user_nocheck(x,ptr,size)					\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_addr;							\
+	long __pu_err = 0;						\
+									\
+	might_sleep();							\
+	__pu_val = (x);							\
+	__pu_addr = (long) (ptr);					\
+	switch (size) {							\
+	case 1: __put_user_asm("sb", __pu_val); break;			\
+	case 2: __put_user_asm("sh", __pu_val); break;			\
+	case 4: __put_user_asm("sw", __pu_val); break;			\
+	case 8: __PUT_USER_DW(__pu_val); break;				\
+	default: __put_user_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_check(x,ptr,size)					\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_addr;							\
+	long __pu_err;							\
+									\
+	might_sleep();							\
+	__pu_val = (x);							\
+	__pu_addr = (long) (ptr);					\
+	__pu_err = access_ok(VERIFY_WRITE, (void *) __pu_addr, size)	\
+				? 0 : -EFAULT;				\
+									\
+	if (likely(!__pu_err)) {					\
+		switch (size) {						\
+		case 1: __put_user_asm("sb", __pu_val); break;		\
+		case 2: __put_user_asm("sh", __pu_val); break;		\
+		case 4: __put_user_asm("sw", __pu_val); break;		\
+		case 8: __PUT_USER_DW(__pu_val); break;			\
+		default: __put_user_unknown(); break;			\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(insn, __pu_val)					\
+({									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%z2, %3		# __put_user_asm\n"	\
+	"2:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__pu_err)						\
+	: "0" (__pu_err), "Jr" (__pu_val), "o" (__m(__pu_addr)),	\
+	  "i" (-EFAULT));						\
+})
+
+#define __put_user_asm_ll32(__pu_val)					\
+({									\
+	__asm__ __volatile__(						\
+	"1:	sw	%2, %3		# __put_user_asm_ll32	\n"	\
+	"2:	sw	%D2, %4					\n"	\
+	"3:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %5					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous"						\
+	: "=r" (__pu_err)						\
+	: "0" (__pu_err), "r" (__pu_val), "o" (__m(__pu_addr)),		\
+	  "o" (__m(__pu_addr + 4)), "i" (-EFAULT));			\
+})
+
+extern void __put_user_unknown(void);
+
+/*
+ * We're generating jump to subroutines which will be outside the range of
+ * jump instructions
+ */
+#ifdef MODULE
+#define __MODULE_JAL(destination)					\
+	".set\tnoat\n\t"						\
+	__UA_LA "\t$1, " #destination "\n\t" 				\
+	"jalr\t$1\n\t"							\
+	".set\tat\n\t"
+#else
+#define __MODULE_JAL(destination)					\
+	"jal\t" #destination "\n\t"
+#endif
+
+extern size_t __copy_user(void *__to, const void *__from, size_t __n);
+
+#define __invoke_copy_to_user(to,from,n)				\
+({									\
+	register void *__cu_to_r __asm__ ("$4");			\
+	register const void *__cu_from_r __asm__ ("$5");		\
+	register long __cu_len_r __asm__ ("$6");			\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	__MODULE_JAL(__copy_user)					\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  "memory");							\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to,from,n)					\
+({									\
+	void *__cu_to;							\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len;							\
+})
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to,from,n)						\
+({									\
+	void *__cu_to;							\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
+		                                 __cu_len);		\
+	__cu_len;							\
+})
+
+#define __invoke_copy_from_user(to,from,n)				\
+({									\
+	register void *__cu_to_r __asm__ ("$4");			\
+	register const void *__cu_from_r __asm__ ("$5");		\
+	register long __cu_len_r __asm__ ("$6");			\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(__copy_user)					\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  "memory");							\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_from_user: - Copy a block of data from user space, with less checking. * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to,from,n)					\
+({									\
+	void *__cu_to;							\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
+
+/*
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to,from,n)					\
+({									\
+	void *__cu_to;							\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+
+#define copy_in_user(to,from,n)						\
+({									\
+	void *__cu_to;							\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+static inline __kernel_size_t
+__clear_user(void *addr, __kernel_size_t size)
+{
+	__kernel_size_t res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, $0\n\t"
+		"move\t$6, %2\n\t"
+		__MODULE_JAL(__bzero)
+		"move\t%0, $6"
+		: "=r" (res)
+		: "r" (addr), "r" (size)
+		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+
+	return res;
+}
+
+#define clear_user(addr,n)						\
+({									\
+	void * __cl_addr = (addr);					\
+	unsigned long __cl_size = (n);					\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+	__cl_size;							\
+})
+
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+__strncpy_from_user(char *__to, const char *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+strncpy_from_user(char *__to, const char *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strlen_user(const char *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strlen_user(const char *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strnlen_user(const char *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strnlen_user(const char *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+struct exception_table_entry
+{
+	unsigned long insn;
+	unsigned long nextinsn;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-mips/ucontext.h b/include/asm-mips/ucontext.h
new file mode 100644
index 000000000000..8a4b20e88b81
--- /dev/null
+++ b/include/asm-mips/ucontext.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Low level exception handling
+ *
+ * Copyright (C) 1998, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/include/asm-mips/unaligned.h b/include/asm-mips/unaligned.h
new file mode 100644
index 000000000000..a0042563838a
--- /dev/null
+++ b/include/asm-mips/unaligned.h
@@ -0,0 +1,14 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2000, 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_UNALIGNED_H */
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
new file mode 100644
index 000000000000..6d21cc964f76
--- /dev/null
+++ b/include/asm-mips/unistd.h
@@ -0,0 +1,1185 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto
+ * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Linux o32 style syscalls are in the range from 4000 to 4999.
+ */
+#define __NR_Linux			4000
+#define __NR_syscall			(__NR_Linux +   0)
+#define __NR_exit			(__NR_Linux +   1)
+#define __NR_fork			(__NR_Linux +   2)
+#define __NR_read			(__NR_Linux +   3)
+#define __NR_write			(__NR_Linux +   4)
+#define __NR_open			(__NR_Linux +   5)
+#define __NR_close			(__NR_Linux +   6)
+#define __NR_waitpid			(__NR_Linux +   7)
+#define __NR_creat			(__NR_Linux +   8)
+#define __NR_link			(__NR_Linux +   9)
+#define __NR_unlink			(__NR_Linux +  10)
+#define __NR_execve			(__NR_Linux +  11)
+#define __NR_chdir			(__NR_Linux +  12)
+#define __NR_time			(__NR_Linux +  13)
+#define __NR_mknod			(__NR_Linux +  14)
+#define __NR_chmod			(__NR_Linux +  15)
+#define __NR_lchown			(__NR_Linux +  16)
+#define __NR_break			(__NR_Linux +  17)
+#define __NR_unused18			(__NR_Linux +  18)
+#define __NR_lseek			(__NR_Linux +  19)
+#define __NR_getpid			(__NR_Linux +  20)
+#define __NR_mount			(__NR_Linux +  21)
+#define __NR_umount			(__NR_Linux +  22)
+#define __NR_setuid			(__NR_Linux +  23)
+#define __NR_getuid			(__NR_Linux +  24)
+#define __NR_stime			(__NR_Linux +  25)
+#define __NR_ptrace			(__NR_Linux +  26)
+#define __NR_alarm			(__NR_Linux +  27)
+#define __NR_unused28			(__NR_Linux +  28)
+#define __NR_pause			(__NR_Linux +  29)
+#define __NR_utime			(__NR_Linux +  30)
+#define __NR_stty			(__NR_Linux +  31)
+#define __NR_gtty			(__NR_Linux +  32)
+#define __NR_access			(__NR_Linux +  33)
+#define __NR_nice			(__NR_Linux +  34)
+#define __NR_ftime			(__NR_Linux +  35)
+#define __NR_sync			(__NR_Linux +  36)
+#define __NR_kill			(__NR_Linux +  37)
+#define __NR_rename			(__NR_Linux +  38)
+#define __NR_mkdir			(__NR_Linux +  39)
+#define __NR_rmdir			(__NR_Linux +  40)
+#define __NR_dup			(__NR_Linux +  41)
+#define __NR_pipe			(__NR_Linux +  42)
+#define __NR_times			(__NR_Linux +  43)
+#define __NR_prof			(__NR_Linux +  44)
+#define __NR_brk			(__NR_Linux +  45)
+#define __NR_setgid			(__NR_Linux +  46)
+#define __NR_getgid			(__NR_Linux +  47)
+#define __NR_signal			(__NR_Linux +  48)
+#define __NR_geteuid			(__NR_Linux +  49)
+#define __NR_getegid			(__NR_Linux +  50)
+#define __NR_acct			(__NR_Linux +  51)
+#define __NR_umount2			(__NR_Linux +  52)
+#define __NR_lock			(__NR_Linux +  53)
+#define __NR_ioctl			(__NR_Linux +  54)
+#define __NR_fcntl			(__NR_Linux +  55)
+#define __NR_mpx			(__NR_Linux +  56)
+#define __NR_setpgid			(__NR_Linux +  57)
+#define __NR_ulimit			(__NR_Linux +  58)
+#define __NR_unused59			(__NR_Linux +  59)
+#define __NR_umask			(__NR_Linux +  60)
+#define __NR_chroot			(__NR_Linux +  61)
+#define __NR_ustat			(__NR_Linux +  62)
+#define __NR_dup2			(__NR_Linux +  63)
+#define __NR_getppid			(__NR_Linux +  64)
+#define __NR_getpgrp			(__NR_Linux +  65)
+#define __NR_setsid			(__NR_Linux +  66)
+#define __NR_sigaction			(__NR_Linux +  67)
+#define __NR_sgetmask			(__NR_Linux +  68)
+#define __NR_ssetmask			(__NR_Linux +  69)
+#define __NR_setreuid			(__NR_Linux +  70)
+#define __NR_setregid			(__NR_Linux +  71)
+#define __NR_sigsuspend			(__NR_Linux +  72)
+#define __NR_sigpending			(__NR_Linux +  73)
+#define __NR_sethostname		(__NR_Linux +  74)
+#define __NR_setrlimit			(__NR_Linux +  75)
+#define __NR_getrlimit			(__NR_Linux +  76)
+#define __NR_getrusage			(__NR_Linux +  77)
+#define __NR_gettimeofday		(__NR_Linux +  78)
+#define __NR_settimeofday		(__NR_Linux +  79)
+#define __NR_getgroups			(__NR_Linux +  80)
+#define __NR_setgroups			(__NR_Linux +  81)
+#define __NR_reserved82			(__NR_Linux +  82)
+#define __NR_symlink			(__NR_Linux +  83)
+#define __NR_unused84			(__NR_Linux +  84)
+#define __NR_readlink			(__NR_Linux +  85)
+#define __NR_uselib			(__NR_Linux +  86)
+#define __NR_swapon			(__NR_Linux +  87)
+#define __NR_reboot			(__NR_Linux +  88)
+#define __NR_readdir			(__NR_Linux +  89)
+#define __NR_mmap			(__NR_Linux +  90)
+#define __NR_munmap			(__NR_Linux +  91)
+#define __NR_truncate			(__NR_Linux +  92)
+#define __NR_ftruncate			(__NR_Linux +  93)
+#define __NR_fchmod			(__NR_Linux +  94)
+#define __NR_fchown			(__NR_Linux +  95)
+#define __NR_getpriority		(__NR_Linux +  96)
+#define __NR_setpriority		(__NR_Linux +  97)
+#define __NR_profil			(__NR_Linux +  98)
+#define __NR_statfs			(__NR_Linux +  99)
+#define __NR_fstatfs			(__NR_Linux + 100)
+#define __NR_ioperm			(__NR_Linux + 101)
+#define __NR_socketcall			(__NR_Linux + 102)
+#define __NR_syslog			(__NR_Linux + 103)
+#define __NR_setitimer			(__NR_Linux + 104)
+#define __NR_getitimer			(__NR_Linux + 105)
+#define __NR_stat			(__NR_Linux + 106)
+#define __NR_lstat			(__NR_Linux + 107)
+#define __NR_fstat			(__NR_Linux + 108)
+#define __NR_unused109			(__NR_Linux + 109)
+#define __NR_iopl			(__NR_Linux + 110)
+#define __NR_vhangup			(__NR_Linux + 111)
+#define __NR_idle			(__NR_Linux + 112)
+#define __NR_vm86			(__NR_Linux + 113)
+#define __NR_wait4			(__NR_Linux + 114)
+#define __NR_swapoff			(__NR_Linux + 115)
+#define __NR_sysinfo			(__NR_Linux + 116)
+#define __NR_ipc			(__NR_Linux + 117)
+#define __NR_fsync			(__NR_Linux + 118)
+#define __NR_sigreturn			(__NR_Linux + 119)
+#define __NR_clone			(__NR_Linux + 120)
+#define __NR_setdomainname		(__NR_Linux + 121)
+#define __NR_uname			(__NR_Linux + 122)
+#define __NR_modify_ldt			(__NR_Linux + 123)
+#define __NR_adjtimex			(__NR_Linux + 124)
+#define __NR_mprotect			(__NR_Linux + 125)
+#define __NR_sigprocmask		(__NR_Linux + 126)
+#define __NR_create_module		(__NR_Linux + 127)
+#define __NR_init_module		(__NR_Linux + 128)
+#define __NR_delete_module		(__NR_Linux + 129)
+#define __NR_get_kernel_syms		(__NR_Linux + 130)
+#define __NR_quotactl			(__NR_Linux + 131)
+#define __NR_getpgid			(__NR_Linux + 132)
+#define __NR_fchdir			(__NR_Linux + 133)
+#define __NR_bdflush			(__NR_Linux + 134)
+#define __NR_sysfs			(__NR_Linux + 135)
+#define __NR_personality		(__NR_Linux + 136)
+#define __NR_afs_syscall		(__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid			(__NR_Linux + 138)
+#define __NR_setfsgid			(__NR_Linux + 139)
+#define __NR__llseek			(__NR_Linux + 140)
+#define __NR_getdents			(__NR_Linux + 141)
+#define __NR__newselect			(__NR_Linux + 142)
+#define __NR_flock			(__NR_Linux + 143)
+#define __NR_msync			(__NR_Linux + 144)
+#define __NR_readv			(__NR_Linux + 145)
+#define __NR_writev			(__NR_Linux + 146)
+#define __NR_cacheflush			(__NR_Linux + 147)
+#define __NR_cachectl			(__NR_Linux + 148)
+#define __NR_sysmips			(__NR_Linux + 149)
+#define __NR_unused150			(__NR_Linux + 150)
+#define __NR_getsid			(__NR_Linux + 151)
+#define __NR_fdatasync			(__NR_Linux + 152)
+#define __NR__sysctl			(__NR_Linux + 153)
+#define __NR_mlock			(__NR_Linux + 154)
+#define __NR_munlock			(__NR_Linux + 155)
+#define __NR_mlockall			(__NR_Linux + 156)
+#define __NR_munlockall			(__NR_Linux + 157)
+#define __NR_sched_setparam		(__NR_Linux + 158)
+#define __NR_sched_getparam		(__NR_Linux + 159)
+#define __NR_sched_setscheduler		(__NR_Linux + 160)
+#define __NR_sched_getscheduler		(__NR_Linux + 161)
+#define __NR_sched_yield		(__NR_Linux + 162)
+#define __NR_sched_get_priority_max	(__NR_Linux + 163)
+#define __NR_sched_get_priority_min	(__NR_Linux + 164)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 165)
+#define __NR_nanosleep			(__NR_Linux + 166)
+#define __NR_mremap			(__NR_Linux + 167)
+#define __NR_accept			(__NR_Linux + 168)
+#define __NR_bind			(__NR_Linux + 169)
+#define __NR_connect			(__NR_Linux + 170)
+#define __NR_getpeername		(__NR_Linux + 171)
+#define __NR_getsockname		(__NR_Linux + 172)
+#define __NR_getsockopt			(__NR_Linux + 173)
+#define __NR_listen			(__NR_Linux + 174)
+#define __NR_recv			(__NR_Linux + 175)
+#define __NR_recvfrom			(__NR_Linux + 176)
+#define __NR_recvmsg			(__NR_Linux + 177)
+#define __NR_send			(__NR_Linux + 178)
+#define __NR_sendmsg			(__NR_Linux + 179)
+#define __NR_sendto			(__NR_Linux + 180)
+#define __NR_setsockopt			(__NR_Linux + 181)
+#define __NR_shutdown			(__NR_Linux + 182)
+#define __NR_socket			(__NR_Linux + 183)
+#define __NR_socketpair			(__NR_Linux + 184)
+#define __NR_setresuid			(__NR_Linux + 185)
+#define __NR_getresuid			(__NR_Linux + 186)
+#define __NR_query_module		(__NR_Linux + 187)
+#define __NR_poll			(__NR_Linux + 188)
+#define __NR_nfsservctl			(__NR_Linux + 189)
+#define __NR_setresgid			(__NR_Linux + 190)
+#define __NR_getresgid			(__NR_Linux + 191)
+#define __NR_prctl			(__NR_Linux + 192)
+#define __NR_rt_sigreturn		(__NR_Linux + 193)
+#define __NR_rt_sigaction		(__NR_Linux + 194)
+#define __NR_rt_sigprocmask		(__NR_Linux + 195)
+#define __NR_rt_sigpending		(__NR_Linux + 196)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 197)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 198)
+#define __NR_rt_sigsuspend		(__NR_Linux + 199)
+#define __NR_pread64			(__NR_Linux + 200)
+#define __NR_pwrite64			(__NR_Linux + 201)
+#define __NR_chown			(__NR_Linux + 202)
+#define __NR_getcwd			(__NR_Linux + 203)
+#define __NR_capget			(__NR_Linux + 204)
+#define __NR_capset			(__NR_Linux + 205)
+#define __NR_sigaltstack		(__NR_Linux + 206)
+#define __NR_sendfile			(__NR_Linux + 207)
+#define __NR_getpmsg			(__NR_Linux + 208)
+#define __NR_putpmsg			(__NR_Linux + 209)
+#define __NR_mmap2			(__NR_Linux + 210)
+#define __NR_truncate64			(__NR_Linux + 211)
+#define __NR_ftruncate64		(__NR_Linux + 212)
+#define __NR_stat64			(__NR_Linux + 213)
+#define __NR_lstat64			(__NR_Linux + 214)
+#define __NR_fstat64			(__NR_Linux + 215)
+#define __NR_pivot_root			(__NR_Linux + 216)
+#define __NR_mincore			(__NR_Linux + 217)
+#define __NR_madvise			(__NR_Linux + 218)
+#define __NR_getdents64			(__NR_Linux + 219)
+#define __NR_fcntl64			(__NR_Linux + 220)
+#define __NR_reserved221		(__NR_Linux + 221)
+#define __NR_gettid			(__NR_Linux + 222)
+#define __NR_readahead			(__NR_Linux + 223)
+#define __NR_setxattr			(__NR_Linux + 224)
+#define __NR_lsetxattr			(__NR_Linux + 225)
+#define __NR_fsetxattr			(__NR_Linux + 226)
+#define __NR_getxattr			(__NR_Linux + 227)
+#define __NR_lgetxattr			(__NR_Linux + 228)
+#define __NR_fgetxattr			(__NR_Linux + 229)
+#define __NR_listxattr			(__NR_Linux + 230)
+#define __NR_llistxattr			(__NR_Linux + 231)
+#define __NR_flistxattr			(__NR_Linux + 232)
+#define __NR_removexattr		(__NR_Linux + 233)
+#define __NR_lremovexattr		(__NR_Linux + 234)
+#define __NR_fremovexattr		(__NR_Linux + 235)
+#define __NR_tkill			(__NR_Linux + 236)
+#define __NR_sendfile64			(__NR_Linux + 237)
+#define __NR_futex			(__NR_Linux + 238)
+#define __NR_sched_setaffinity		(__NR_Linux + 239)
+#define __NR_sched_getaffinity		(__NR_Linux + 240)
+#define __NR_io_setup			(__NR_Linux + 241)
+#define __NR_io_destroy			(__NR_Linux + 242)
+#define __NR_io_getevents		(__NR_Linux + 243)
+#define __NR_io_submit			(__NR_Linux + 244)
+#define __NR_io_cancel			(__NR_Linux + 245)
+#define __NR_exit_group			(__NR_Linux + 246)
+#define __NR_lookup_dcookie		(__NR_Linux + 247)
+#define __NR_epoll_create		(__NR_Linux + 248)
+#define __NR_epoll_ctl			(__NR_Linux + 249)
+#define __NR_epoll_wait			(__NR_Linux + 250)
+#define __NR_remap_file_pages		(__NR_Linux + 251)
+#define __NR_set_tid_address		(__NR_Linux + 252)
+#define __NR_restart_syscall		(__NR_Linux + 253)
+#define __NR_fadvise64			(__NR_Linux + 254)
+#define __NR_statfs64			(__NR_Linux + 255)
+#define __NR_fstatfs64			(__NR_Linux + 256)
+#define __NR_timer_create		(__NR_Linux + 257)
+#define __NR_timer_settime		(__NR_Linux + 258)
+#define __NR_timer_gettime		(__NR_Linux + 259)
+#define __NR_timer_getoverrun		(__NR_Linux + 260)
+#define __NR_timer_delete		(__NR_Linux + 261)
+#define __NR_clock_settime		(__NR_Linux + 262)
+#define __NR_clock_gettime		(__NR_Linux + 263)
+#define __NR_clock_getres		(__NR_Linux + 264)
+#define __NR_clock_nanosleep		(__NR_Linux + 265)
+#define __NR_tgkill			(__NR_Linux + 266)
+#define __NR_utimes			(__NR_Linux + 267)
+#define __NR_mbind			(__NR_Linux + 268)
+#define __NR_get_mempolicy		(__NR_Linux + 269)
+#define __NR_set_mempolicy		(__NR_Linux + 270)
+#define __NR_mq_open			(__NR_Linux + 271)
+#define __NR_mq_unlink			(__NR_Linux + 272)
+#define __NR_mq_timedsend		(__NR_Linux + 273)
+#define __NR_mq_timedreceive		(__NR_Linux + 274)
+#define __NR_mq_notify			(__NR_Linux + 275)
+#define __NR_mq_getsetattr		(__NR_Linux + 276)
+#define __NR_vserver			(__NR_Linux + 277)
+#define __NR_waitid			(__NR_Linux + 278)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 279) */
+#define __NR_add_key			(__NR_Linux + 280)
+#define __NR_request_key		(__NR_Linux + 281)
+#define __NR_keyctl			(__NR_Linux + 282)
+
+/*
+ * Offset of the last Linux o32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		282
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#define __NR_O32_Linux			4000
+#define __NR_O32_Linux_syscalls		282
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/*
+ * Linux 64-bit syscalls are in the range from 5000 to 5999.
+ */
+#define __NR_Linux			5000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_set_tid_address		(__NR_Linux + 212)
+#define __NR_restart_syscall		(__NR_Linux + 213)
+#define __NR_semtimedop			(__NR_Linux + 214)
+#define __NR_fadvise64			(__NR_Linux + 215)
+#define __NR_timer_create		(__NR_Linux + 216)
+#define __NR_timer_settime		(__NR_Linux + 217)
+#define __NR_timer_gettime		(__NR_Linux + 218)
+#define __NR_timer_getoverrun		(__NR_Linux + 219)
+#define __NR_timer_delete		(__NR_Linux + 220)
+#define __NR_clock_settime		(__NR_Linux + 221)
+#define __NR_clock_gettime		(__NR_Linux + 222)
+#define __NR_clock_getres		(__NR_Linux + 223)
+#define __NR_clock_nanosleep		(__NR_Linux + 224)
+#define __NR_tgkill			(__NR_Linux + 225)
+#define __NR_utimes			(__NR_Linux + 226)
+#define __NR_mbind			(__NR_Linux + 227)
+#define __NR_get_mempolicy		(__NR_Linux + 228)
+#define __NR_set_mempolicy		(__NR_Linux + 229)
+#define __NR_mq_open			(__NR_Linux + 230)
+#define __NR_mq_unlink			(__NR_Linux + 231)
+#define __NR_mq_timedsend		(__NR_Linux + 232)
+#define __NR_mq_timedreceive		(__NR_Linux + 233)
+#define __NR_mq_notify			(__NR_Linux + 234)
+#define __NR_mq_getsetattr		(__NR_Linux + 235)
+#define __NR_vserver			(__NR_Linux + 236)
+#define __NR_waitid			(__NR_Linux + 237)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 238) */
+#define __NR_add_key			(__NR_Linux + 239)
+#define __NR_request_key		(__NR_Linux + 240)
+#define __NR_keyctl			(__NR_Linux + 241)
+
+/*
+ * Offset of the last Linux 64-bit flavoured syscall
+ */
+#define __NR_Linux_syscalls		241
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define __NR_64_Linux			5000
+#define __NR_64_Linux_syscalls		241
+
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+
+/*
+ * Linux N32 syscalls are in the range from 6000 to 6999.
+ */
+#define __NR_Linux			6000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_fcntl64			(__NR_Linux + 212)
+#define __NR_set_tid_address		(__NR_Linux + 213)
+#define __NR_restart_syscall		(__NR_Linux + 214)
+#define __NR_semtimedop			(__NR_Linux + 215)
+#define __NR_fadvise64			(__NR_Linux + 216)
+#define __NR_statfs64			(__NR_Linux + 217)
+#define __NR_fstatfs64			(__NR_Linux + 218)
+#define __NR_sendfile64			(__NR_Linux + 219)
+#define __NR_timer_create		(__NR_Linux + 220)
+#define __NR_timer_settime		(__NR_Linux + 221)
+#define __NR_timer_gettime		(__NR_Linux + 222)
+#define __NR_timer_getoverrun		(__NR_Linux + 223)
+#define __NR_timer_delete		(__NR_Linux + 224)
+#define __NR_clock_settime		(__NR_Linux + 225)
+#define __NR_clock_gettime		(__NR_Linux + 226)
+#define __NR_clock_getres		(__NR_Linux + 227)
+#define __NR_clock_nanosleep		(__NR_Linux + 228)
+#define __NR_tgkill			(__NR_Linux + 229)
+#define __NR_utimes			(__NR_Linux + 230)
+#define __NR_mbind			(__NR_Linux + 231)
+#define __NR_get_mempolicy		(__NR_Linux + 232)
+#define __NR_set_mempolicy		(__NR_Linux + 233)
+#define __NR_mq_open			(__NR_Linux + 234)
+#define __NR_mq_unlink			(__NR_Linux + 235)
+#define __NR_mq_timedsend		(__NR_Linux + 236)
+#define __NR_mq_timedreceive		(__NR_Linux + 237)
+#define __NR_mq_notify			(__NR_Linux + 238)
+#define __NR_mq_getsetattr		(__NR_Linux + 239)
+#define __NR_vserver			(__NR_Linux + 240)
+#define __NR_waitid			(__NR_Linux + 241)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 242) */
+#define __NR_add_key			(__NR_Linux + 243)
+#define __NR_request_key		(__NR_Linux + 244)
+#define __NR_keyctl			(__NR_Linux + 245)
+
+/*
+ * Offset of the last N32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		245
+
+#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#define __NR_N32_Linux			6000
+#define __NR_N32_Linux_syscalls		245
+
+#ifndef __ASSEMBLY__
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+	register unsigned long __a3 asm("$7"); \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %2\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "=r" (__a3) \
+	: "i" (__NR_##name) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+/*
+ * DANGER: This macro isn't usable for the pipe(2) call
+ * which has a unusual return convention.
+ */
+#define _syscall1(type,name,atype,a) \
+type name(atype a) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a3 asm("$7"); \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %3\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "=r" (__a3) \
+	: "r" (__a0), "i" (__NR_##name) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#define _syscall2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a3 asm("$7"); \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %4\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "=r" (__a3) \
+	: "r" (__a0), "r" (__a1), "i" (__NR_##name) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#define _syscall3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7"); \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %5\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "=r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##name) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7") = (unsigned long) d; \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %5\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "+r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##name) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+
+/*
+ * Using those means your brain needs more than an oil change ;-)
+ */
+
+#define _syscall5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7") = (unsigned long) d; \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"lw\t$2, %6\n\t" \
+	"subu\t$29, 32\n\t" \
+	"sw\t$2, 16($29)\n\t" \
+	"li\t$2, %5\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	"addiu\t$29, 32\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "+r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##name), \
+	  "m" ((unsigned long)e) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
+type name(atype a, btype b, ctype c, dtype d, etype e, ftype f) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7") = (unsigned long) d; \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"lw\t$2, %6\n\t" \
+	"lw\t$8, %7\n\t" \
+	"subu\t$29, 32\n\t" \
+	"sw\t$2, 16($29)\n\t" \
+	"sw\t$8, 20($29)\n\t" \
+	"li\t$2, %5\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	"addiu\t$29, 32\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "+r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##name), \
+	  "m" ((unsigned long)e), "m" ((unsigned long)f) \
+	: "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
+
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+
+#define _syscall5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name (atype a,btype b,ctype c,dtype d,etype e) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7") = (unsigned long) d; \
+	register unsigned long __a4 asm("$8") = (unsigned long) e; \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %6\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "+r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "r" (__a4), "i" (__NR_##name) \
+	: "$2", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
+type name (atype a,btype b,ctype c,dtype d,etype e,ftype f) \
+{ \
+	register unsigned long __a0 asm("$4") = (unsigned long) a; \
+	register unsigned long __a1 asm("$5") = (unsigned long) b; \
+	register unsigned long __a2 asm("$6") = (unsigned long) c; \
+	register unsigned long __a3 asm("$7") = (unsigned long) d; \
+	register unsigned long __a4 asm("$8") = (unsigned long) e; \
+	register unsigned long __a5 asm("$9") = (unsigned long) f; \
+	unsigned long __v0; \
+	\
+	__asm__ volatile ( \
+	".set\tnoreorder\n\t" \
+	"li\t$2, %7\t\t\t# " #name "\n\t" \
+	"syscall\n\t" \
+	"move\t%0, $2\n\t" \
+	".set\treorder" \
+	: "=&r" (__v0), "+r" (__a3) \
+	: "r" (__a0), "r" (__a1), "r" (__a2), "r" (__a4), "r" (__a5), \
+	  "i" (__NR_##name) \
+	: "$2", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
+	  "memory"); \
+	\
+	if (__a3 == 0) \
+		return (type) __v0; \
+	errno = __v0; \
+	return (type) -1; \
+}
+
+#endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+# ifndef __mips64
+#  define __ARCH_WANT_STAT64
+# endif
+# ifdef CONFIG_MIPS32
+#  define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_MIPS32_O32
+#  define __ARCH_WANT_COMPAT_SYS_TIME
+# endif
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/sim.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, size_t len,
+				int prot, int flags,
+				int fd, off_t offset);
+asmlinkage long sys_mmap2(
+			unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(nabi_no_regargs struct pt_regs regs);
+asmlinkage int sys_pipe(nabi_no_regargs struct pt_regs regs);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall")
+
+#endif /* _ASM_UNISTD_H */
diff --git a/include/asm-mips/user.h b/include/asm-mips/user.h
new file mode 100644
index 000000000000..89bf8b4cab3c
--- /dev/null
+++ b/include/asm-mips/user.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the irix-core).  The file
+ * contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	unsigned long	regs[EF_SIZE /		/* integer and fp regs */
+			sizeof(unsigned long) + 64];
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/include/asm-mips/vga.h b/include/asm-mips/vga.h
new file mode 100644
index 000000000000..6b35cf054c79
--- /dev/null
+++ b/include/asm-mips/vga.h
@@ -0,0 +1,19 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x)	(0xb0000000L + (unsigned long)(x))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif /* _ASM_VGA_H */
diff --git a/include/asm-mips/vr4181/irq.h b/include/asm-mips/vr4181/irq.h
new file mode 100644
index 000000000000..4bf0ea970ed0
--- /dev/null
+++ b/include/asm-mips/vr4181/irq.h
@@ -0,0 +1,122 @@
+/*
+ * Macros for vr4181 IRQ numbers.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/*
+ * Strategy:
+ *
+ * Vr4181 has conceptually three levels of interrupt controllers:
+ *  1. the CPU itself with 8 intr level.
+ *  2. system interrupt controller, cascaded from int0 pin in CPU, 32 intrs
+ *  3. GPIO interrupts : forwarding external interrupts to sys intr controller
+ */
+
+/* decide the irq block assignment */
+#define	VR4181_NUM_CPU_IRQ	8
+#define	VR4181_NUM_SYS_IRQ	32
+#define	VR4181_NUM_GPIO_IRQ	16
+
+#define	VR4181_IRQ_BASE		0
+
+#define	VR4181_CPU_IRQ_BASE	VR4181_IRQ_BASE
+#define	VR4181_SYS_IRQ_BASE	(VR4181_CPU_IRQ_BASE + VR4181_NUM_CPU_IRQ)
+#define	VR4181_GPIO_IRQ_BASE	(VR4181_SYS_IRQ_BASE + VR4181_NUM_SYS_IRQ)
+
+/* CPU interrupts */
+
+/*
+   IP0 - Software interrupt
+   IP1 - Software interrupt
+   IP2 - All but battery, high speed modem, and real time clock
+   IP3 - RTC Long1 (system timer)
+   IP4 - RTC Long2
+   IP5 - High Speed Modem (unused on VR4181)
+   IP6 - Unused
+   IP7 - Timer interrupt from CPO_COMPARE
+*/
+
+#define VR4181_IRQ_SW1       (VR4181_CPU_IRQ_BASE + 0)
+#define VR4181_IRQ_SW2       (VR4181_CPU_IRQ_BASE + 1)
+#define VR4181_IRQ_INT0      (VR4181_CPU_IRQ_BASE + 2)
+#define VR4181_IRQ_INT1      (VR4181_CPU_IRQ_BASE + 3)
+#define VR4181_IRQ_INT2      (VR4181_CPU_IRQ_BASE + 4)
+#define VR4181_IRQ_INT3      (VR4181_CPU_IRQ_BASE + 5)
+#define VR4181_IRQ_INT4      (VR4181_CPU_IRQ_BASE + 6)
+#define VR4181_IRQ_TIMER     (VR4181_CPU_IRQ_BASE + 7)
+
+
+/* Cascaded from VR4181_IRQ_INT0 (ICU mapped interrupts) */
+
+/*
+   IP2 - same as VR4181_IRQ_INT1
+   IP8 - This is a cascade to GPIO IRQ's. Do not use.
+   IP16 - same as VR4181_IRQ_INT2
+   IP18 - CompactFlash
+*/
+
+#define VR4181_IRQ_BATTERY   (VR4181_SYS_IRQ_BASE + 0)
+#define VR4181_IRQ_POWER     (VR4181_SYS_IRQ_BASE + 1)
+#define VR4181_IRQ_RTCL1     (VR4181_SYS_IRQ_BASE + 2)
+#define VR4181_IRQ_ETIMER    (VR4181_SYS_IRQ_BASE + 3)
+#define VR4181_IRQ_RFU12     (VR4181_SYS_IRQ_BASE + 4)
+#define VR4181_IRQ_PIU       (VR4181_SYS_IRQ_BASE + 5)
+#define VR4181_IRQ_AIU       (VR4181_SYS_IRQ_BASE + 6)
+#define VR4181_IRQ_KIU       (VR4181_SYS_IRQ_BASE + 7)
+#define VR4181_IRQ_GIU       (VR4181_SYS_IRQ_BASE + 8)
+#define VR4181_IRQ_SIU       (VR4181_SYS_IRQ_BASE + 9)
+#define VR4181_IRQ_RFU18     (VR4181_SYS_IRQ_BASE + 10)
+#define VR4181_IRQ_SOFT      (VR4181_SYS_IRQ_BASE + 11)
+#define VR4181_IRQ_RFU20     (VR4181_SYS_IRQ_BASE + 12)
+#define VR4181_IRQ_DOZEPIU   (VR4181_SYS_IRQ_BASE + 13)
+#define VR4181_IRQ_RFU22     (VR4181_SYS_IRQ_BASE + 14)
+#define VR4181_IRQ_RFU23     (VR4181_SYS_IRQ_BASE + 15)
+#define VR4181_IRQ_RTCL2     (VR4181_SYS_IRQ_BASE + 16)
+#define VR4181_IRQ_LED       (VR4181_SYS_IRQ_BASE + 17)
+#define VR4181_IRQ_ECU       (VR4181_SYS_IRQ_BASE + 18)
+#define VR4181_IRQ_CSU       (VR4181_SYS_IRQ_BASE + 19)
+#define VR4181_IRQ_USB       (VR4181_SYS_IRQ_BASE + 20)
+#define VR4181_IRQ_DMA       (VR4181_SYS_IRQ_BASE + 21)
+#define VR4181_IRQ_LCD       (VR4181_SYS_IRQ_BASE + 22)
+#define VR4181_IRQ_RFU31     (VR4181_SYS_IRQ_BASE + 23)
+#define VR4181_IRQ_RFU32     (VR4181_SYS_IRQ_BASE + 24)
+#define VR4181_IRQ_RFU33     (VR4181_SYS_IRQ_BASE + 25)
+#define VR4181_IRQ_RFU34     (VR4181_SYS_IRQ_BASE + 26)
+#define VR4181_IRQ_RFU35     (VR4181_SYS_IRQ_BASE + 27)
+#define VR4181_IRQ_RFU36     (VR4181_SYS_IRQ_BASE + 28)
+#define VR4181_IRQ_RFU37     (VR4181_SYS_IRQ_BASE + 29)
+#define VR4181_IRQ_RFU38     (VR4181_SYS_IRQ_BASE + 30)
+#define VR4181_IRQ_RFU39     (VR4181_SYS_IRQ_BASE + 31)
+
+/* Cascaded from VR4181_IRQ_GIU */
+#define VR4181_IRQ_GPIO0     (VR4181_GPIO_IRQ_BASE + 0)
+#define VR4181_IRQ_GPIO1     (VR4181_GPIO_IRQ_BASE + 1)
+#define VR4181_IRQ_GPIO2     (VR4181_GPIO_IRQ_BASE + 2)
+#define VR4181_IRQ_GPIO3     (VR4181_GPIO_IRQ_BASE + 3)
+#define VR4181_IRQ_GPIO4     (VR4181_GPIO_IRQ_BASE + 4)
+#define VR4181_IRQ_GPIO5     (VR4181_GPIO_IRQ_BASE + 5)
+#define VR4181_IRQ_GPIO6     (VR4181_GPIO_IRQ_BASE + 6)
+#define VR4181_IRQ_GPIO7     (VR4181_GPIO_IRQ_BASE + 7)
+#define VR4181_IRQ_GPIO8     (VR4181_GPIO_IRQ_BASE + 8)
+#define VR4181_IRQ_GPIO9     (VR4181_GPIO_IRQ_BASE + 9)
+#define VR4181_IRQ_GPIO10    (VR4181_GPIO_IRQ_BASE + 10)
+#define VR4181_IRQ_GPIO11    (VR4181_GPIO_IRQ_BASE + 11)
+#define VR4181_IRQ_GPIO12    (VR4181_GPIO_IRQ_BASE + 12)
+#define VR4181_IRQ_GPIO13    (VR4181_GPIO_IRQ_BASE + 13)
+#define VR4181_IRQ_GPIO14    (VR4181_GPIO_IRQ_BASE + 14)
+#define VR4181_IRQ_GPIO15    (VR4181_GPIO_IRQ_BASE + 15)
+
+
+// Alternative to above GPIO IRQ defines
+#define VR4181_IRQ_GPIO(pin) ((VR4181_IRQ_GPIO0) + (pin))
+
+#define VR4181_IRQ_MAX       (VR4181_IRQ_BASE + VR4181_NUM_CPU_IRQ + \
+                              VR4181_NUM_SYS_IRQ + VR4181_NUM_GPIO_IRQ)
diff --git a/include/asm-mips/vr4181/vr4181.h b/include/asm-mips/vr4181/vr4181.h
new file mode 100644
index 000000000000..5c5d60741515
--- /dev/null
+++ b/include/asm-mips/vr4181/vr4181.h
@@ -0,0 +1,413 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Michael Klar
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ */
+#ifndef __ASM_VR4181_VR4181_H
+#define __ASM_VR4181_VR4181_H
+
+#include <asm/addrspace.h>
+
+#include <asm/vr4181/irq.h>
+
+#ifndef __ASSEMBLY__
+#define __preg8		(volatile unsigned char*)
+#define __preg16	(volatile unsigned short*)
+#define __preg32	(volatile unsigned int*)
+#else
+#define __preg8
+#define __preg16
+#define __preg32
+#endif
+
+// Embedded CPU peripheral registers
+// Note that many of the registers have different physical address for VR4181
+
+// Bus Control Unit (BCU)
+#define VR4181_BCUCNTREG1	__preg16(KSEG1 + 0x0A000000)	/* BCU control register 1 (R/W) */
+#define VR4181_CMUCLKMSK	__preg16(KSEG1 + 0x0A000004)	/* Clock mask register (R/W) */
+#define VR4181_CMUCLKMSK_MSKCSUPCLK  0x0040
+#define VR4181_CMUCLKMSK_MSKAIUPCLK  0x0020
+#define VR4181_CMUCLKMSK_MSKPIUPCLK  0x0010
+#define VR4181_CMUCLKMSK_MSKADUPCLK  0x0008
+#define VR4181_CMUCLKMSK_MSKSIU18M   0x0004
+#define VR4181_CMUCLKMSK_MSKADU18M   0x0002
+#define VR4181_CMUCLKMSK_MSKUSB      0x0001
+#define VR4181_CMUCLKMSK_MSKSIU      VR4181_CMUCLKMSK_MSKSIU18M
+#define VR4181_BCUSPEEDREG	__preg16(KSEG1 + 0x0A00000C)	/* BCU access time parameter (R/W) */
+#define VR4181_BCURFCNTREG	__preg16(KSEG1 + 0x0A000010)	/* BCU refresh control register (R/W) */
+#define VR4181_REVIDREG		__preg16(KSEG1 + 0x0A000014)	/* Revision ID register (R) */
+#define VR4181_CLKSPEEDREG	__preg16(KSEG1 + 0x0A000018)	/* Clock speed register (R) */
+#define VR4181_EDOMCYTREG	__preg16(KSEG1 + 0x0A000300)	/* Memory cycle timing register (R/W) */
+#define VR4181_MEMCFG_REG	__preg16(KSEG1 + 0x0A000304)	/* Memory configuration register (R/W) */
+#define VR4181_MODE_REG		__preg16(KSEG1 + 0x0A000308)	/* SDRAM mode register (R/W) */
+#define VR4181_SDTIMINGREG	__preg16(KSEG1 + 0x0A00030C)	/* SDRAM timing register (R/W) */
+
+// DMA Control Unit (DCU)
+#define VR4181_MICDEST1REG1	__preg16(KSEG1 + 0x0A000020)	/* Microphone destination 1 address register 1 (R/W) */
+#define VR4181_MICDEST1REG2	__preg16(KSEG1 + 0x0A000022)	/* Microphone destination 1 address register 2 (R/W) */
+#define VR4181_MICDEST2REG1	__preg16(KSEG1 + 0x0A000024)	/* Microphone destination 2 address register 1 (R/W) */
+#define VR4181_MICDEST2REG2	__preg16(KSEG1 + 0x0A000026)	/* Microphone destination 2 address register 2 (R/W) */
+#define VR4181_SPKRRC1REG1	__preg16(KSEG1 + 0x0A000028)	/* Speaker Source 1 address register 1 (R/W) */
+#define VR4181_SPKRRC1REG2	__preg16(KSEG1 + 0x0A00002A)	/* Speaker Source 1 address register 2 (R/W) */
+#define VR4181_SPKRRC2REG1	__preg16(KSEG1 + 0x0A00002C)	/* Speaker Source 2 address register 1 (R/W) */
+#define VR4181_SPKRRC2REG2	__preg16(KSEG1 + 0x0A00002E)	/* Speaker Source 2 address register 2 (R/W) */
+#define VR4181_DMARSTREG	__preg16(KSEG1 + 0x0A000040)	/* DMA Reset register (R/W) */
+#define VR4181_AIUDMAMSKREG	__preg16(KSEG1 + 0x0A000046)	/* Audio DMA mask register (R/W) */
+#define VR4181_USBDMAMSKREG	__preg16(KSEG1 + 0x0A000600)	/* USB DMA Mask register (R/W) */
+#define VR4181_USBRXS1AREG1	__preg16(KSEG1 + 0x0A000602)	/* USB Rx source 1 address register 1 (R/W) */
+#define VR4181_USBRXS1AREG2	__preg16(KSEG1 + 0x0A000604)	/* USB Rx source 1 address register 2 (R/W) */
+#define VR4181_USBRXS2AREG1	__preg16(KSEG1 + 0x0A000606)	/* USB Rx source 2 address register 1 (R/W) */
+#define VR4181_USBRXS2AREG2	__preg16(KSEG1 + 0x0A000608)	/* USB Rx source 2 address register 2 (R/W) */
+#define VR4181_USBTXS1AREG1	__preg16(KSEG1 + 0x0A00060A)	/* USB Tx source 1 address register 1 (R/W) */
+#define VR4181_USBTXS1AREG2	__preg16(KSEG1 + 0x0A00060C)	/* USB Tx source 1 address register 2 (R/W) */
+#define VR4181_USBTXS2AREG1	__preg16(KSEG1 + 0x0A00060E)	/* USB Tx source 2 address register 1 (R/W) */
+#define VR4181_USBTXS2AREG2	__preg16(KSEG1 + 0x0A000610)	/* USB Tx source 2 address register 2 (R/W) */
+#define VR4181_USBRXD1AREG1	__preg16(KSEG1 + 0x0A00062A)	/* USB Rx destination 1 address register 1 (R/W) */
+#define VR4181_USBRXD1AREG2	__preg16(KSEG1 + 0x0A00062C)	/* USB Rx destination 1 address register 2 (R/W) */
+#define VR4181_USBRXD2AREG1	__preg16(KSEG1 + 0x0A00062E)	/* USB Rx destination 2 address register 1 (R/W) */
+#define VR4181_USBRXD2AREG2	__preg16(KSEG1 + 0x0A000630)	/* USB Rx destination 2 address register 2 (R/W) */
+#define VR4181_USBTXD1AREG1	__preg16(KSEG1 + 0x0A000632)	/* USB Tx destination 1 address register 1 (R/W) */
+#define VR4181_USBTXD1AREG2	__preg16(KSEG1 + 0x0A000634)	/* USB Tx destination 1 address register 2 (R/W) */
+#define VR4181_USBTXD2AREG1	__preg16(KSEG1 + 0x0A000636)	/* USB Tx destination 2 address register 1 (R/W) */
+#define VR4181_USBTXD2AREG2	__preg16(KSEG1 + 0x0A000638)	/* USB Tx destination 2 address register 2 (R/W) */
+#define VR4181_RxRCLENREG	__preg16(KSEG1 + 0x0A000652)	/* USB Rx record length register (R/W) */
+#define VR4181_TxRCLENREG	__preg16(KSEG1 + 0x0A000654)	/* USB Tx record length register (R/W) */
+#define VR4181_MICRCLENREG	__preg16(KSEG1 + 0x0A000658)	/* Microphone record length register (R/W) */
+#define VR4181_SPKRCLENREG	__preg16(KSEG1 + 0x0A00065A)	/* Speaker record length register (R/W) */
+#define VR4181_USBCFGREG	__preg16(KSEG1 + 0x0A00065C)	/* USB configuration register (R/W) */
+#define VR4181_MICDMACFGREG	__preg16(KSEG1 + 0x0A00065E)	/* Microphone DMA configuration register (R/W) */
+#define VR4181_SPKDMACFGREG	__preg16(KSEG1 + 0x0A000660)	/* Speaker DMA configuration register (R/W) */
+#define VR4181_DMAITRQREG	__preg16(KSEG1 + 0x0A000662)	/* DMA interrupt request register (R/W) */
+#define VR4181_DMACLTREG	__preg16(KSEG1 + 0x0A000664)	/* DMA control register (R/W) */
+#define VR4181_DMAITMKREG	__preg16(KSEG1 + 0x0A000666)	/* DMA interrupt mask register (R/W) */
+
+// ISA Bridge
+#define VR4181_ISABRGCTL	__preg16(KSEG1 + 0x0B0002C0)	/* ISA Bridge Control Register (R/W) */
+#define VR4181_ISABRGSTS	__preg16(KSEG1 + 0x0B0002C2)	/* ISA Bridge Status Register (R/W) */
+#define VR4181_XISACTL		__preg16(KSEG1 + 0x0B0002C4)	/* External ISA Control Register (R/W) */
+
+// Clocked Serial Interface (CSI)
+#define VR4181_CSIMODE		__preg16(KSEG1 + 0x0B000900)	/* CSI Mode Register (R/W) */
+#define VR4181_CSIRXDATA	__preg16(KSEG1 + 0x0B000902)	/* CSI Receive Data Register (R) */
+#define VR4181_CSITXDATA	__preg16(KSEG1 + 0x0B000904)	/* CSI Transmit Data Register (R/W) */
+#define VR4181_CSILSTAT		__preg16(KSEG1 + 0x0B000906)	/* CSI Line Status Register (R/W) */
+#define VR4181_CSIINTMSK	__preg16(KSEG1 + 0x0B000908)	/* CSI Interrupt Mask Register (R/W) */
+#define VR4181_CSIINTSTAT	__preg16(KSEG1 + 0x0B00090a)	/* CSI Interrupt Status Register (R/W) */
+#define VR4181_CSITXBLEN	__preg16(KSEG1 + 0x0B00090c)	/* CSI Transmit Burst Length Register (R/W) */
+#define VR4181_CSIRXBLEN	__preg16(KSEG1 + 0x0B00090e)	/* CSI Receive Burst Length Register (R/W) */
+
+// Interrupt Control Unit (ICU)
+#define VR4181_SYSINT1REG	__preg16(KSEG1 + 0x0A000080)	/* Level 1 System interrupt register 1 (R) */
+#define VR4181_MSYSINT1REG	__preg16(KSEG1 + 0x0A00008C)	/* Level 1 mask system interrupt register 1 (R/W) */
+#define VR4181_NMIREG		__preg16(KSEG1 + 0x0A000098)	/* NMI register (R/W) */
+#define VR4181_SOFTINTREG	__preg16(KSEG1 + 0x0A00009A)	/* Software interrupt register (R/W) */
+#define VR4181_SYSINT2REG	__preg16(KSEG1 + 0x0A000200)	/* Level 1 System interrupt register 2 (R) */
+#define VR4181_MSYSINT2REG	__preg16(KSEG1 + 0x0A000206)	/* Level 1 mask system interrupt register 2 (R/W) */
+#define VR4181_PIUINTREGro	__preg16(KSEG1 + 0x0B000082)	/* Level 2 PIU interrupt register (R) */
+#define VR4181_AIUINTREG	__preg16(KSEG1 + 0x0B000084)	/* Level 2 AIU interrupt register (R) */
+#define VR4181_MPIUINTREG	__preg16(KSEG1 + 0x0B00008E)	/* Level 2 mask PIU interrupt register (R/W) */
+#define VR4181_MAIUINTREG	__preg16(KSEG1 + 0x0B000090)	/* Level 2 mask AIU interrupt register (R/W) */
+#define VR4181_MKIUINTREG	__preg16(KSEG1 + 0x0B000092)	/* Level 2 mask KIU interrupt register (R/W) */
+#define VR4181_KIUINTREG	__preg16(KSEG1 + 0x0B000198)	/* Level 2 KIU interrupt register (R) */
+
+// Power Management Unit (PMU)
+#define VR4181_PMUINTREG	__preg16(KSEG1 + 0x0B0000A0)	/* PMU Status Register (R/W) */
+#define VR4181_PMUINT_POWERSW  0x1	/* Power switch */
+#define VR4181_PMUINT_BATT     0x2	/* Low batt during normal operation */
+#define VR4181_PMUINT_DEADMAN  0x4	/* Deadman's switch */
+#define VR4181_PMUINT_RESET    0x8	/* Reset switch */
+#define VR4181_PMUINT_RTCRESET 0x10	/* RTC Reset */
+#define VR4181_PMUINT_TIMEOUT  0x20	/* HAL Timer Reset */
+#define VR4181_PMUINT_BATTLOW  0x100	/* Battery low */
+#define VR4181_PMUINT_RTC      0x200	/* RTC Alarm */
+#define VR4181_PMUINT_DCD      0x400	/* DCD# */
+#define VR4181_PMUINT_GPIO0    0x1000	/* GPIO0 */
+#define VR4181_PMUINT_GPIO1    0x2000	/* GPIO1 */
+#define VR4181_PMUINT_GPIO2    0x4000	/* GPIO2 */
+#define VR4181_PMUINT_GPIO3    0x8000	/* GPIO3 */
+
+#define VR4181_PMUCNTREG	__preg16(KSEG1 + 0x0B0000A2)	/* PMU Control Register (R/W) */
+#define VR4181_PMUWAITREG	__preg16(KSEG1 + 0x0B0000A8)	/* PMU Wait Counter Register (R/W) */
+#define VR4181_PMUDIVREG	__preg16(KSEG1 + 0x0B0000AC)	/* PMU Divide Mode Register (R/W) */
+#define VR4181_DRAMHIBCTL	__preg16(KSEG1 + 0x0B0000B2)	/* DRAM Hibernate Control Register (R/W) */
+
+// Real Time Clock Unit (RTC)
+#define VR4181_ETIMELREG	__preg16(KSEG1 + 0x0B0000C0)	/* Elapsed Time L Register (R/W) */
+#define VR4181_ETIMEMREG	__preg16(KSEG1 + 0x0B0000C2)	/* Elapsed Time M Register (R/W) */
+#define VR4181_ETIMEHREG	__preg16(KSEG1 + 0x0B0000C4)	/* Elapsed Time H Register (R/W) */
+#define VR4181_ECMPLREG		__preg16(KSEG1 + 0x0B0000C8)	/* Elapsed Compare L Register (R/W) */
+#define VR4181_ECMPMREG		__preg16(KSEG1 + 0x0B0000CA)	/* Elapsed Compare M Register (R/W) */
+#define VR4181_ECMPHREG		__preg16(KSEG1 + 0x0B0000CC)	/* Elapsed Compare H Register (R/W) */
+#define VR4181_RTCL1LREG	__preg16(KSEG1 + 0x0B0000D0)	/* RTC Long 1 L Register (R/W) */
+#define VR4181_RTCL1HREG	__preg16(KSEG1 + 0x0B0000D2)	/* RTC Long 1 H Register (R/W) */
+#define VR4181_RTCL1CNTLREG	__preg16(KSEG1 + 0x0B0000D4)	/* RTC Long 1 Count L Register (R) */
+#define VR4181_RTCL1CNTHREG	__preg16(KSEG1 + 0x0B0000D6)	/* RTC Long 1 Count H Register (R) */
+#define VR4181_RTCL2LREG	__preg16(KSEG1 + 0x0B0000D8)	/* RTC Long 2 L Register (R/W) */
+#define VR4181_RTCL2HREG	__preg16(KSEG1 + 0x0B0000DA)	/* RTC Long 2 H Register (R/W) */
+#define VR4181_RTCL2CNTLREG	__preg16(KSEG1 + 0x0B0000DC)	/* RTC Long 2 Count L Register (R) */
+#define VR4181_RTCL2CNTHREG	__preg16(KSEG1 + 0x0B0000DE)	/* RTC Long 2 Count H Register (R) */
+#define VR4181_RTCINTREG	__preg16(KSEG1 + 0x0B0001DE)	/* RTC Interrupt Register (R/W) */
+
+// Deadman's Switch Unit (DSU)
+#define VR4181_DSUCNTREG	__preg16(KSEG1 + 0x0B0000E0)	/* DSU Control Register (R/W) */
+#define VR4181_DSUSETREG	__preg16(KSEG1 + 0x0B0000E2)	/* DSU Dead Time Set Register (R/W) */
+#define VR4181_DSUCLRREG	__preg16(KSEG1 + 0x0B0000E4)	/* DSU Clear Register (W) */
+#define VR4181_DSUTIMREG	__preg16(KSEG1 + 0x0B0000E6)	/* DSU Elapsed Time Register (R/W) */
+
+// General Purpose I/O Unit (GIU)
+#define VR4181_GPMD0REG		__preg16(KSEG1 + 0x0B000300)	/* GPIO Mode 0 Register (R/W) */
+#define VR4181_GPMD1REG		__preg16(KSEG1 + 0x0B000302)	/* GPIO Mode 1 Register (R/W) */
+#define VR4181_GPMD2REG		__preg16(KSEG1 + 0x0B000304)	/* GPIO Mode 2 Register (R/W) */
+#define VR4181_GPMD3REG		__preg16(KSEG1 + 0x0B000306)	/* GPIO Mode 3 Register (R/W) */
+#define VR4181_GPDATHREG	__preg16(KSEG1 + 0x0B000308)	/* GPIO Data High Register (R/W) */
+#define VR4181_GPDATHREG_GPIO16  0x0001
+#define VR4181_GPDATHREG_GPIO17  0x0002
+#define VR4181_GPDATHREG_GPIO18  0x0004
+#define VR4181_GPDATHREG_GPIO19  0x0008
+#define VR4181_GPDATHREG_GPIO20  0x0010
+#define VR4181_GPDATHREG_GPIO21  0x0020
+#define VR4181_GPDATHREG_GPIO22  0x0040
+#define VR4181_GPDATHREG_GPIO23  0x0080
+#define VR4181_GPDATHREG_GPIO24  0x0100
+#define VR4181_GPDATHREG_GPIO25  0x0200
+#define VR4181_GPDATHREG_GPIO26  0x0400
+#define VR4181_GPDATHREG_GPIO27  0x0800
+#define VR4181_GPDATHREG_GPIO28  0x1000
+#define VR4181_GPDATHREG_GPIO29  0x2000
+#define VR4181_GPDATHREG_GPIO30  0x4000
+#define VR4181_GPDATHREG_GPIO31  0x8000
+#define VR4181_GPDATLREG	__preg16(KSEG1 + 0x0B00030A)	/* GPIO Data Low Register (R/W) */
+#define VR4181_GPDATLREG_GPIO0   0x0001
+#define VR4181_GPDATLREG_GPIO1   0x0002
+#define VR4181_GPDATLREG_GPIO2   0x0004
+#define VR4181_GPDATLREG_GPIO3   0x0008
+#define VR4181_GPDATLREG_GPIO4   0x0010
+#define VR4181_GPDATLREG_GPIO5   0x0020
+#define VR4181_GPDATLREG_GPIO6   0x0040
+#define VR4181_GPDATLREG_GPIO7   0x0080
+#define VR4181_GPDATLREG_GPIO8   0x0100
+#define VR4181_GPDATLREG_GPIO9   0x0200
+#define VR4181_GPDATLREG_GPIO10  0x0400
+#define VR4181_GPDATLREG_GPIO11  0x0800
+#define VR4181_GPDATLREG_GPIO12  0x1000
+#define VR4181_GPDATLREG_GPIO13  0x2000
+#define VR4181_GPDATLREG_GPIO14  0x4000
+#define VR4181_GPDATLREG_GPIO15  0x8000
+#define VR4181_GPINTEN		__preg16(KSEG1 + 0x0B00030C)	/* GPIO Interrupt Enable Register (R/W) */
+#define VR4181_GPINTMSK		__preg16(KSEG1 + 0x0B00030E)	/* GPIO Interrupt Mask Register (R/W) */
+#define VR4181_GPINTTYPH	__preg16(KSEG1 + 0x0B000310)	/* GPIO Interrupt Type High Register (R/W) */
+#define VR4181_GPINTTYPL	__preg16(KSEG1 + 0x0B000312)	/* GPIO Interrupt Type Low Register (R/W) */
+#define VR4181_GPINTSTAT	__preg16(KSEG1 + 0x0B000314)	/* GPIO Interrupt Status Register (R/W) */
+#define VR4181_GPHIBSTH		__preg16(KSEG1 + 0x0B000316)	/* GPIO Hibernate Pin State High Register (R/W) */
+#define VR4181_GPHIBSTL		__preg16(KSEG1 + 0x0B000318)	/* GPIO Hibernate Pin State Low Register (R/W) */
+#define VR4181_GPSICTL		__preg16(KSEG1 + 0x0B00031A)	/* GPIO Serial Interface Control Register (R/W) */
+#define VR4181_KEYEN		__preg16(KSEG1 + 0x0B00031C)	/* Keyboard Scan Pin Enable Register (R/W) */
+#define VR4181_PCS0STRA		__preg16(KSEG1 + 0x0B000320)	/* Programmable Chip Select [0] Start Address Register (R/W) */
+#define VR4181_PCS0STPA		__preg16(KSEG1 + 0x0B000322)	/* Programmable Chip Select [0] Stop Address Register (R/W) */
+#define VR4181_PCS0HIA		__preg16(KSEG1 + 0x0B000324)	/* Programmable Chip Select [0] High Address Register (R/W) */
+#define VR4181_PCS1STRA		__preg16(KSEG1 + 0x0B000326)	/* Programmable Chip Select [1] Start Address Register (R/W) */
+#define VR4181_PCS1STPA		__preg16(KSEG1 + 0x0B000328)	/* Programmable Chip Select [1] Stop Address Register (R/W) */
+#define VR4181_PCS1HIA		__preg16(KSEG1 + 0x0B00032A)	/* Programmable Chip Select [1] High Address Register (R/W) */
+#define VR4181_PCSMODE		__preg16(KSEG1 + 0x0B00032C)	/* Programmable Chip Select Mode Register (R/W) */
+#define VR4181_LCDGPMODE	__preg16(KSEG1 + 0x0B00032E)	/* LCD General Purpose Mode Register (R/W) */
+#define VR4181_MISCREG0		__preg16(KSEG1 + 0x0B000330)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG1		__preg16(KSEG1 + 0x0B000332)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG2		__preg16(KSEG1 + 0x0B000334)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG3		__preg16(KSEG1 + 0x0B000336)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG4		__preg16(KSEG1 + 0x0B000338)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG5		__preg16(KSEG1 + 0x0B00033A)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG6		__preg16(KSEG1 + 0x0B00033C)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG7		__preg16(KSEG1 + 0x0B00033D)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG8		__preg16(KSEG1 + 0x0B000340)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG9		__preg16(KSEG1 + 0x0B000342)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG10	__preg16(KSEG1 + 0x0B000344)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG11	__preg16(KSEG1 + 0x0B000346)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG12	__preg16(KSEG1 + 0x0B000348)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG13	__preg16(KSEG1 + 0x0B00034A)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG14	__preg16(KSEG1 + 0x0B00034C)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_MISCREG15	__preg16(KSEG1 + 0x0B00034E)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
+#define VR4181_SECIRQMASKL	VR4181_GPINTEN
+// No SECIRQMASKH for VR4181
+
+// Touch Panel Interface Unit (PIU)
+#define VR4181_PIUCNTREG	__preg16(KSEG1 + 0x0B000122)	/* PIU Control register (R/W) */
+#define VR4181_PIUCNTREG_PIUSEQEN	0x0004
+#define VR4181_PIUCNTREG_PIUPWR		0x0002
+#define VR4181_PIUCNTREG_PADRST		0x0001
+
+#define VR4181_PIUINTREG	__preg16(KSEG1 + 0x0B000124)	/* PIU Interrupt cause register (R/W) */
+#define VR4181_PIUINTREG_OVP		0x8000
+#define VR4181_PIUINTREG_PADCMD		0x0040
+#define VR4181_PIUINTREG_PADADP		0x0020
+#define VR4181_PIUINTREG_PADPAGE1	0x0010
+#define VR4181_PIUINTREG_PADPAGE0	0x0008
+#define VR4181_PIUINTREG_PADDLOST	0x0004
+#define VR4181_PIUINTREG_PENCHG		0x0001
+
+#define VR4181_PIUSIVLREG	__preg16(KSEG1 + 0x0B000126)	/* PIU Data sampling interval register (R/W) */
+#define VR4181_PIUSTBLREG	__preg16(KSEG1 + 0x0B000128)	/* PIU A/D converter start delay register (R/W) */
+#define VR4181_PIUCMDREG	__preg16(KSEG1 + 0x0B00012A)	/* PIU A/D command register (R/W) */
+#define VR4181_PIUASCNREG	__preg16(KSEG1 + 0x0B000130)	/* PIU A/D port scan register (R/W) */
+#define VR4181_PIUAMSKREG	__preg16(KSEG1 + 0x0B000132)	/* PIU A/D scan mask register (R/W) */
+#define VR4181_PIUCIVLREG	__preg16(KSEG1 + 0x0B00013E)	/* PIU Check interval register (R) */
+#define VR4181_PIUPB00REG	__preg16(KSEG1 + 0x0B0002A0)	/* PIU Page 0 Buffer 0 register (R/W) */
+#define VR4181_PIUPB01REG	__preg16(KSEG1 + 0x0B0002A2)	/* PIU Page 0 Buffer 1 register (R/W) */
+#define VR4181_PIUPB02REG	__preg16(KSEG1 + 0x0B0002A4)	/* PIU Page 0 Buffer 2 register (R/W) */
+#define VR4181_PIUPB03REG	__preg16(KSEG1 + 0x0B0002A6)	/* PIU Page 0 Buffer 3 register (R/W) */
+#define VR4181_PIUPB10REG	__preg16(KSEG1 + 0x0B0002A8)	/* PIU Page 1 Buffer 0 register (R/W) */
+#define VR4181_PIUPB11REG	__preg16(KSEG1 + 0x0B0002AA)	/* PIU Page 1 Buffer 1 register (R/W) */
+#define VR4181_PIUPB12REG	__preg16(KSEG1 + 0x0B0002AC)	/* PIU Page 1 Buffer 2 register (R/W) */
+#define VR4181_PIUPB13REG	__preg16(KSEG1 + 0x0B0002AE)	/* PIU Page 1 Buffer 3 register (R/W) */
+#define VR4181_PIUAB0REG	__preg16(KSEG1 + 0x0B0002B0)	/* PIU A/D scan Buffer 0 register (R/W) */
+#define VR4181_PIUAB1REG	__preg16(KSEG1 + 0x0B0002B2)	/* PIU A/D scan Buffer 1 register (R/W) */
+#define VR4181_PIUAB2REG	__preg16(KSEG1 + 0x0B0002B4)	/* PIU A/D scan Buffer 2 register (R/W) */
+#define VR4181_PIUAB3REG	__preg16(KSEG1 + 0x0B0002B6)	/* PIU A/D scan Buffer 3 register (R/W) */
+#define VR4181_PIUPB04REG	__preg16(KSEG1 + 0x0B0002BC)	/* PIU Page 0 Buffer 4 register (R/W) */
+#define VR4181_PIUPB14REG	__preg16(KSEG1 + 0x0B0002BE)	/* PIU Page 1 Buffer 4 register (R/W) */
+
+// Audio Interface Unit (AIU)
+#define VR4181_SODATREG		__preg16(KSEG1 + 0x0B000166)	/* Speaker Output Data Register (R/W) */
+#define VR4181_SCNTREG		__preg16(KSEG1 + 0x0B000168)	/* Speaker Output Control Register (R/W) */
+#define VR4181_MIDATREG		__preg16(KSEG1 + 0x0B000170)	/* Mike Input Data Register (R/W) */
+#define VR4181_MCNTREG		__preg16(KSEG1 + 0x0B000172)	/* Mike Input Control Register (R/W) */
+#define VR4181_DVALIDREG	__preg16(KSEG1 + 0x0B000178)	/* Data Valid Register (R/W) */
+#define VR4181_SEQREG		__preg16(KSEG1 + 0x0B00017A)	/* Sequential Register (R/W) */
+#define VR4181_INTREG		__preg16(KSEG1 + 0x0B00017C)	/* Interrupt Register (R/W) */
+#define VR4181_SDMADATREG	__preg16(KSEG1 + 0x0B000160)	/* Speaker DMA Data Register (R/W) */
+#define VR4181_MDMADATREG	__preg16(KSEG1 + 0x0B000162)	/* Microphone DMA Data Register (R/W) */
+#define VR4181_DAVREF_SETUP	__preg16(KSEG1 + 0x0B000164)	/* DAC Vref setup register (R/W) */
+#define VR4181_SCNVC_END	__preg16(KSEG1 + 0x0B00016E)	/* Speaker sample rate control (R/W) */
+#define VR4181_MIDATREG		__preg16(KSEG1 + 0x0B000170)	/* Microphone Input Data Register (R/W) */
+#define VR4181_MCNTREG		__preg16(KSEG1 + 0x0B000172)	/* Microphone Input Control Register (R/W) */
+#define VR4181_MCNVC_END	__preg16(KSEG1 + 0x0B00017E)	/* Microphone sample rate control (R/W) */
+
+// Keyboard Interface Unit (KIU)
+#define VR4181_KIUDAT0		__preg16(KSEG1 + 0x0B000180)	/* KIU Data0 Register (R/W) */
+#define VR4181_KIUDAT1		__preg16(KSEG1 + 0x0B000182)	/* KIU Data1 Register (R/W) */
+#define VR4181_KIUDAT2		__preg16(KSEG1 + 0x0B000184)	/* KIU Data2 Register (R/W) */
+#define VR4181_KIUDAT3		__preg16(KSEG1 + 0x0B000186)	/* KIU Data3 Register (R/W) */
+#define VR4181_KIUDAT4		__preg16(KSEG1 + 0x0B000188)	/* KIU Data4 Register (R/W) */
+#define VR4181_KIUDAT5		__preg16(KSEG1 + 0x0B00018A)	/* KIU Data5 Register (R/W) */
+#define VR4181_KIUSCANREP	__preg16(KSEG1 + 0x0B000190)	/* KIU Scan/Repeat Register (R/W) */
+#define VR4181_KIUSCANREP_KEYEN      0x8000
+#define VR4181_KIUSCANREP_SCANSTP    0x0008
+#define VR4181_KIUSCANREP_SCANSTART  0x0004
+#define VR4181_KIUSCANREP_ATSTP      0x0002
+#define VR4181_KIUSCANREP_ATSCAN     0x0001
+#define VR4181_KIUSCANS		__preg16(KSEG1 + 0x0B000192)	/* KIU Scan Status Register (R) */
+#define VR4181_KIUWKS		__preg16(KSEG1 + 0x0B000194)	/* KIU Wait Keyscan Stable Register (R/W) */
+#define VR4181_KIUWKI		__preg16(KSEG1 + 0x0B000196)	/* KIU Wait Keyscan Interval Register (R/W) */
+#define VR4181_KIUINT		__preg16(KSEG1 + 0x0B000198)	/* KIU Interrupt Register (R/W) */
+#define VR4181_KIUINT_KDATLOST       0x0004
+#define VR4181_KIUINT_KDATRDY        0x0002
+#define VR4181_KIUINT_SCANINT        0x0001
+#define VR4181_KIUDAT6		__preg16(KSEG1 + 0x0B00018C)	/* Scan Line 6 Key Data Register (R) */
+#define VR4181_KIUDAT7		__preg16(KSEG1 + 0x0B00018E)	/* Scan Line 7 Key Data Register (R) */
+
+// CompactFlash Controller
+#define VR4181_PCCARDINDEX	__preg8(KSEG1 + 0x0B0008E0)	/* PC Card Controller Index Register */
+#define VR4181_PCCARDDATA	__preg8(KSEG1 + 0x0B0008E1)	/* PC Card Controller Data Register */
+#define VR4181_INTSTATREG	__preg16(KSEG1 + 0x0B0008F8)	/* Interrupt Status Register (R/W) */
+#define VR4181_INTMSKREG	__preg16(KSEG1 + 0x0B0008FA)	/* Interrupt Mask Register (R/W) */
+#define VR4181_CFG_REG_1	__preg16(KSEG1 + 0x0B0008FE)	/* Configuration Register 1 */
+
+// LED Control Unit (LED)
+#define VR4181_LEDHTSREG	__preg16(KSEG1 + 0x0B000240)	/* LED H Time Set register (R/W) */
+#define VR4181_LEDLTSREG	__preg16(KSEG1 + 0x0B000242)	/* LED L Time Set register (R/W) */
+#define VR4181_LEDCNTREG	__preg16(KSEG1 + 0x0B000248)	/* LED Control register (R/W) */
+#define VR4181_LEDASTCREG	__preg16(KSEG1 + 0x0B00024A)	/* LED Auto Stop Time Count register (R/W) */
+#define VR4181_LEDINTREG	__preg16(KSEG1 + 0x0B00024C)	/* LED Interrupt register (R/W) */
+
+// Serial Interface Unit (SIU / SIU1 and SIU2)
+#define VR4181_SIURB		__preg8(KSEG1 + 0x0C000010)	/* Receiver Buffer Register (Read) DLAB = 0 (R) */
+#define VR4181_SIUTH		__preg8(KSEG1 + 0x0C000010)	/* Transmitter Holding Register (Write) DLAB = 0 (W) */
+#define VR4181_SIUDLL		__preg8(KSEG1 + 0x0C000010)	/* Divisor Latch (Least Significant Byte) DLAB = 1 (R/W) */
+#define VR4181_SIUIE		__preg8(KSEG1 + 0x0C000011)	/* Interrupt Enable DLAB = 0 (R/W) */
+#define VR4181_SIUDLM		__preg8(KSEG1 + 0x0C000011)	/* Divisor Latch (Most Significant Byte) DLAB = 1 (R/W) */
+#define VR4181_SIUIID		__preg8(KSEG1 + 0x0C000012)	/* Interrupt Identification Register (Read) (R) */
+#define VR4181_SIUFC		__preg8(KSEG1 + 0x0C000012)	/* FIFO Control Register (Write) (W) */
+#define VR4181_SIULC		__preg8(KSEG1 + 0x0C000013)	/* Line Control Register (R/W) */
+#define VR4181_SIUMC		__preg8(KSEG1 + 0x0C000014)	/* MODEM Control Register (R/W) */
+#define VR4181_SIULS		__preg8(KSEG1 + 0x0C000015)	/* Line Status Register (R/W) */
+#define VR4181_SIUMS		__preg8(KSEG1 + 0x0C000016)	/* MODEM Status Register (R/W) */
+#define VR4181_SIUSC		__preg8(KSEG1 + 0x0C000017)	/* Scratch Register (R/W) */
+#define VR4181_SIURESET		__preg8(KSEG1 + 0x0C000019)	/* SIU Reset Register (R/W) */
+#define VR4181_SIUACTMSK	__preg8(KSEG1 + 0x0C00001C)	/* SIU Activity Mask (R/W) */
+#define VR4181_SIUACTTMR	__preg8(KSEG1 + 0x0C00001E)	/* SIU Activity Timer (R/W) */
+#define VR4181_SIURB_2		__preg8(KSEG1 + 0x0C000000)	/* Receive Buffer Register (Read) (R) */
+#define VR4181_SIUTH_2		__preg8(KSEG1 + 0x0C000000)	/* Transmitter Holding Register (Write) (W) */
+#define VR4181_SIUDLL_2		__preg8(KSEG1 + 0x0C000000)	/* Divisor Latch (Least Significant Byte) (R/W) */
+#define VR4181_SIUIE_2		__preg8(KSEG1 + 0x0C000001)	/* Interrupt Enable (DLAB = 0) (R/W) */
+#define VR4181_SIUDLM_2		__preg8(KSEG1 + 0x0C000001)	/* Divisor Latch (Most Significant Byte) (DLAB = 1) (R/W) */
+#define VR4181_SIUIID_2		__preg8(KSEG1 + 0x0C000002)	/* Interrupt Identification Register (Read) (R) */
+#define VR4181_SIUFC_2		__preg8(KSEG1 + 0x0C000002)	/* FIFO Control Register (Write) (W) */
+#define VR4181_SIULC_2		__preg8(KSEG1 + 0x0C000003)	/* Line Control Register (R/W) */
+#define VR4181_SIUMC_2		__preg8(KSEG1 + 0x0C000004)	/* Modem Control Register (R/W) */
+#define VR4181_SIULS_2		__preg8(KSEG1 + 0x0C000005)	/* Line Status Register (R/W) */
+#define VR4181_SIUMS_2		__preg8(KSEG1 + 0x0C000006)	/* Modem Status Register (R/W) */
+#define VR4181_SIUSC_2		__preg8(KSEG1 + 0x0C000007)	/* Scratch Register (R/W) */
+#define VR4181_SIUIRSEL_2	__preg8(KSEG1 + 0x0C000008)	/* SIU IrDA Selectot (R/W) */
+#define VR4181_SIURESET_2	__preg8(KSEG1 + 0x0C000009)	/* SIU Reset Register (R/W) */
+#define VR4181_SIUCSEL_2	__preg8(KSEG1 + 0x0C00000A)	/* IrDA Echo-back Control (R/W) */
+#define VR4181_SIUACTMSK_2	__preg8(KSEG1 + 0x0C00000C)	/* SIU Activity Mask Register (R/W) */
+#define VR4181_SIUACTTMR_2	__preg8(KSEG1 + 0x0C00000E)	/* SIU Activity Timer Register (R/W) */
+
+
+// USB Module
+#define VR4181_USBINFIFO	__preg16(KSEG1 + 0x0B000780)	/* USB Bulk Input FIFO (Bulk In End Point) (W) */
+#define VR4181_USBOUTFIFO	__preg16(KSEG1 + 0x0B000782)	/* USB Bulk Output FIFO (Bulk Out End Point) (R) */
+#define VR4181_USBCTLFIFO	__preg16(KSEG1 + 0x0B000784)	/* USB Control FIFO (Control End Point) (W) */
+#define VR4181_USBSTAT		__preg16(KSEG1 + 0x0B000786)	/* Interrupt Status Register (R/W) */
+#define VR4181_USBINTMSK	__preg16(KSEG1 + 0x0B000788)	/* Interrupt Mask Register (R/W) */
+#define VR4181_USBCTLREG	__preg16(KSEG1 + 0x0B00078A)	/* Control Register (R/W) */
+#define VR4181_USBSTPREG	__preg16(KSEG1 + 0x0B00078C)	/* USB Transfer Stop Register (R/W) */
+
+// LCD Controller
+#define VR4181_HRTOTALREG	__preg16(KSEG1 + 0x0A000400)	/* Horizontal total Register (R/W) */
+#define VR4181_HRVISIBREG	__preg16(KSEG1 + 0x0A000402)	/* Horizontal Visible Register (R/W) */
+#define VR4181_LDCLKSTREG	__preg16(KSEG1 + 0x0A000404)	/* Load clock start Register (R/W) */
+#define VR4181_LDCLKNDREG	__preg16(KSEG1 + 0x0A000406)	/* Load clock end Register (R/W) */
+#define VR4181_VRTOTALREG	__preg16(KSEG1 + 0x0A000408)	/* Vertical Total Register (R/W) */
+#define VR4181_VRVISIBREG	__preg16(KSEG1 + 0x0A00040A)	/* Vertical Visible Register (R/W) */
+#define VR4181_FVSTARTREG	__preg16(KSEG1 + 0x0A00040C)	/* FLM vertical start Register (R/W) */
+#define VR4181_FVENDREG		__preg16(KSEG1 + 0x0A00040E)	/* FLM vertical end Register (R/W) */
+#define VR4181_LCDCTRLREG	__preg16(KSEG1 + 0x0A000410)	/* LCD control Register (R/W) */
+#define VR4181_LCDINRQREG	__preg16(KSEG1 + 0x0A000412)	/* LCD Interrupt request Register (R/W) */
+#define VR4181_LCDCFGREG0	__preg16(KSEG1 + 0x0A000414)	/* LCD Configuration Register 0 (R/W) */
+#define VR4181_LCDCFGREG1	__preg16(KSEG1 + 0x0A000416)	/* LCD Configuration Register 1 (R/W) */
+#define VR4181_FBSTAD1REG	__preg16(KSEG1 + 0x0A000418)	/* Frame Buffer Start Address 1 Register (R/W) */
+#define VR4181_FBSTAD2REG	__preg16(KSEG1 + 0x0A00041A)	/* Frame Buffer Start Address 2 Register (R/W) */
+#define VR4181_FBNDAD1REG	__preg16(KSEG1 + 0x0A000420)	/* Frame Buffer End Address 1 Register (R/W) */
+#define VR4181_FBNDAD2REG	__preg16(KSEG1 + 0x0A000422)	/* Frame Buffer End Address 2 register (R/W) */
+#define VR4181_FHSTARTREG	__preg16(KSEG1 + 0x0A000424)	/* FLM horizontal Start Register (R/W) */
+#define VR4181_FHENDREG		__preg16(KSEG1 + 0x0A000426)	/* FLM horizontal End Register (R/W) */
+#define VR4181_PWRCONREG1	__preg16(KSEG1 + 0x0A000430)	/* Power Control register 1 (R/W) */
+#define VR4181_PWRCONREG2	__preg16(KSEG1 + 0x0A000432)	/* Power Control register 2 (R/W) */
+#define VR4181_LCDIMSKREG	__preg16(KSEG1 + 0x0A000434)	/* LCD Interrupt Mask register (R/W) */
+#define VR4181_CPINDCTREG	__preg16(KSEG1 + 0x0A00047E)	/* Color palette Index and control Register (R/W) */
+#define VR4181_CPALDATREG	__preg32(KSEG1 + 0x0A000480)	/* Color palette data register (32bits Register) (R/W) */
+
+// physical address spaces
+#define VR4181_LCD             0x0a000000
+#define VR4181_INTERNAL_IO_2   0x0b000000
+#define VR4181_INTERNAL_IO_1   0x0c000000
+#define VR4181_ISA_MEM         0x10000000
+#define VR4181_ISA_IO          0x14000000
+#define VR4181_ROM             0x18000000
+
+// This is the base address for IO port decoding to which the 16 bit IO port address
+// is added.  Defining it to 0 will usually cause a kernel oops any time port IO is
+// attempted, which can be handy for turning up parts of the kernel that make
+// incorrect architecture assumptions (by assuming that everything acts like a PC),
+// but we need it correctly defined to use the PCMCIA/CF controller:
+#define VR4181_PORT_BASE	(KSEG1 + VR4181_ISA_IO)
+#define VR4181_ISAMEM_BASE	(KSEG1 + VR4181_ISA_MEM)
+
+#endif /* __ASM_VR4181_VR4181_H */
diff --git a/include/asm-mips/vr41xx/capcella.h b/include/asm-mips/vr41xx/capcella.h
new file mode 100644
index 000000000000..5b55083c5281
--- /dev/null
+++ b/include/asm-mips/vr41xx/capcella.h
@@ -0,0 +1,43 @@
+/*
+ *  capcella.h, Include file for ZAO Networks Capcella.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ZAO_CAPCELLA_H
+#define __ZAO_CAPCELLA_H
+
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define PC104PLUS_INTA_PIN		2
+#define PC104PLUS_INTB_PIN		3
+#define PC104PLUS_INTC_PIN		4
+#define PC104PLUS_INTD_PIN		5
+
+/*
+ * Interrupt Number
+ */
+#define RTL8139_1_IRQ			GIU_IRQ(PC104PLUS_INTC_PIN)
+#define RTL8139_2_IRQ			GIU_IRQ(PC104PLUS_INTD_PIN)
+#define PC104PLUS_INTA_IRQ		GIU_IRQ(PC104PLUS_INTA_PIN)
+#define PC104PLUS_INTB_IRQ		GIU_IRQ(PC104PLUS_INTB_PIN)
+#define PC104PLUS_INTC_IRQ		GIU_IRQ(PC104PLUS_INTC_PIN)
+#define PC104PLUS_INTD_IRQ		GIU_IRQ(PC104PLUS_INTD_PIN)
+
+#endif /* __ZAO_CAPCELLA_H */
diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h
new file mode 100644
index 000000000000..42af389019ea
--- /dev/null
+++ b/include/asm-mips/vr41xx/cmbvr4133.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-mips/vr41xx/cmbvr4133.h
+ *
+ * Include file for NEC CMB-VR4133.
+ *
+ * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
+ *         Jun Sun <jsun@mvista.com, or source@mvista.com> and
+ *         Alex Sapkov <asapkov@ru.mvista.com>
+ *
+ * 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __NEC_CMBVR4133_H
+#define __NEC_CMBVR4133_H
+
+#include <asm/addrspace.h>
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define CMBVR41XX_INTA_PIN		1
+#define CMBVR41XX_INTB_PIN		1
+#define CMBVR41XX_INTC_PIN		3
+#define CMBVR41XX_INTD_PIN		1
+#define CMBVR41XX_INTE_PIN		1
+
+/*
+ * Interrupt Number
+ */
+#define CMBVR41XX_INTA_IRQ		GIU_IRQ(CMBVR41XX_INTA_PIN)
+#define CMBVR41XX_INTB_IRQ		GIU_IRQ(CMBVR41XX_INTB_PIN)
+#define CMBVR41XX_INTC_IRQ		GIU_IRQ(CMBVR41XX_INTC_PIN)
+#define CMBVR41XX_INTD_IRQ		GIU_IRQ(CMBVR41XX_INTD_PIN)
+#define CMBVR41XX_INTE_IRQ		GIU_IRQ(CMBVR41XX_INTE_PIN)
+
+#define I8259_IRQ_BASE			72
+#define I8259_IRQ(x)			(I8259_IRQ_BASE + (x))
+#define TIMER_IRQ			I8259_IRQ(0)
+#define KEYBOARD_IRQ			I8259_IRQ(1)
+#define I8259_SLAVE_IRQ			I8259_IRQ(2)
+#define UART3_IRQ			I8259_IRQ(3)
+#define UART1_IRQ			I8259_IRQ(4)
+#define UART2_IRQ			I8259_IRQ(5)
+#define FDC_IRQ				I8259_IRQ(6)
+#define PARPORT_IRQ			I8259_IRQ(7)
+#define RTC_IRQ				I8259_IRQ(8)
+#define USB_IRQ				I8259_IRQ(9)
+#define I8259_INTA_IRQ			I8259_IRQ(10)
+#define AUDIO_IRQ			I8259_IRQ(11)
+#define AUX_IRQ				I8259_IRQ(12)
+#define IDE_PRIMARY_IRQ			I8259_IRQ(14)
+#define IDE_SECONDARY_IRQ		I8259_IRQ(15)
+#define I8259_IRQ_LAST			IDE_SECONDARY_IRQ
+
+#define RTC_PORT(x)	(0xaf000100 + (x))
+#define RTC_IO_EXTENT	0x140
+
+#endif /* __NEC_CMBVR4133_H */
diff --git a/include/asm-mips/vr41xx/e55.h b/include/asm-mips/vr41xx/e55.h
new file mode 100644
index 000000000000..ea37b56fc66d
--- /dev/null
+++ b/include/asm-mips/vr41xx/e55.h
@@ -0,0 +1,43 @@
+/*
+ *  e55.h, Include file for CASIO CASSIOPEIA E-10/15/55/65.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __CASIO_E55_H
+#define __CASIO_E55_H
+
+#include <asm/addrspace.h>
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * Board specific address mapping
+ */
+#define VR41XX_ISA_MEM_BASE		0x10000000
+#define VR41XX_ISA_MEM_SIZE		0x04000000
+
+/* VR41XX_ISA_IO_BASE includes offset from real base. */
+#define VR41XX_ISA_IO_BASE		0x1400c000
+#define VR41XX_ISA_IO_SIZE		0x03ff4000
+
+#define ISA_BUS_IO_BASE			0
+#define ISA_BUS_IO_SIZE			VR41XX_ISA_IO_SIZE
+
+#define IO_PORT_BASE			KSEG1ADDR(VR41XX_ISA_IO_BASE)
+#define IO_PORT_RESOURCE_START		ISA_BUS_IO_BASE
+#define IO_PORT_RESOURCE_END		(ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
+
+#endif /* __CASIO_E55_H */
diff --git a/include/asm-mips/vr41xx/mpc30x.h b/include/asm-mips/vr41xx/mpc30x.h
new file mode 100644
index 000000000000..e6ac3c8e8bae
--- /dev/null
+++ b/include/asm-mips/vr41xx/mpc30x.h
@@ -0,0 +1,37 @@
+/*
+ *  mpc30x.h, Include file for Victor MP-C303/304.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __VICTOR_MPC30X_H
+#define __VICTOR_MPC30X_H
+
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define VRC4173_PIN			1
+#define MQ200_PIN			4
+
+/*
+ * Interrupt Number
+ */
+#define VRC4173_CASCADE_IRQ		GIU_IRQ(VRC4173_PIN)
+#define MQ200_IRQ			GIU_IRQ(MQ200_PIN)
+
+#endif /* __VICTOR_MPC30X_H */
diff --git a/include/asm-mips/vr41xx/siu.h b/include/asm-mips/vr41xx/siu.h
new file mode 100644
index 000000000000..865cc07ddd7f
--- /dev/null
+++ b/include/asm-mips/vr41xx/siu.h
@@ -0,0 +1,50 @@
+/*
+ *  Include file for NEC VR4100 series Serial Interface Unit.
+ *
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_SIU_H
+#define __NEC_VR41XX_SIU_H
+
+typedef enum {
+	SIU_INTERFACE_RS232C,
+	SIU_INTERFACE_IRDA,
+} siu_interface_t;
+
+extern void vr41xx_select_siu_interface(siu_interface_t interface);
+
+typedef enum {
+	SIU_USE_IRDA,
+	FIR_USE_IRDA,
+} irda_use_t;
+
+extern void vr41xx_use_irda(irda_use_t use);
+
+typedef enum {
+	SHARP_IRDA,
+	TEMIC_IRDA,
+	HP_IRDA,
+} irda_module_t;
+
+typedef enum {
+	IRDA_TX_1_5MBPS,
+	IRDA_TX_4MBPS,
+} irda_speed_t;
+
+extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed);
+
+#endif /* __NEC_VR41XX_SIU_H */
diff --git a/include/asm-mips/vr41xx/tb0219.h b/include/asm-mips/vr41xx/tb0219.h
new file mode 100644
index 000000000000..273c6392688f
--- /dev/null
+++ b/include/asm-mips/vr41xx/tb0219.h
@@ -0,0 +1,42 @@
+/*
+ *  tb0219.h, Include file for TANBAC TB0219.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  Modified for TANBAC TB0219:
+ *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0219_H
+#define __TANBAC_TB0219_H
+
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0219_PCI_SLOT1_PIN		2
+#define TB0219_PCI_SLOT2_PIN		3
+#define TB0219_PCI_SLOT3_PIN		4
+
+/*
+ * Interrupt Number
+ */
+#define TB0219_PCI_SLOT1_IRQ		GIU_IRQ(TB0219_PCI_SLOT1_PIN)
+#define TB0219_PCI_SLOT2_IRQ		GIU_IRQ(TB0219_PCI_SLOT2_PIN)
+#define TB0219_PCI_SLOT3_IRQ		GIU_IRQ(TB0219_PCI_SLOT3_PIN)
+
+#endif /* __TANBAC_TB0219_H */
diff --git a/include/asm-mips/vr41xx/tb0226.h b/include/asm-mips/vr41xx/tb0226.h
new file mode 100644
index 000000000000..0ff9a60ecacc
--- /dev/null
+++ b/include/asm-mips/vr41xx/tb0226.h
@@ -0,0 +1,43 @@
+/*
+ *  tb0226.h, Include file for TANBAC TB0226.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0226_H
+#define __TANBAC_TB0226_H
+
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define GD82559_1_PIN			2
+#define GD82559_2_PIN			3
+#define UPD720100_INTA_PIN		4
+#define UPD720100_INTB_PIN		8
+#define UPD720100_INTC_PIN		13
+
+/*
+ * Interrupt Number
+ */
+#define GD82559_1_IRQ			GIU_IRQ(GD82559_1_PIN)
+#define GD82559_2_IRQ			GIU_IRQ(GD82559_2_PIN)
+#define UPD720100_INTA_IRQ		GIU_IRQ(UPD720100_INTA_PIN)
+#define UPD720100_INTB_IRQ		GIU_IRQ(UPD720100_INTB_PIN)
+#define UPD720100_INTC_IRQ		GIU_IRQ(UPD720100_INTC_PIN)
+
+#endif /* __TANBAC_TB0226_H */
diff --git a/include/asm-mips/vr41xx/vr41xx.h b/include/asm-mips/vr41xx/vr41xx.h
new file mode 100644
index 000000000000..caacaced3213
--- /dev/null
+++ b/include/asm-mips/vr41xx/vr41xx.h
@@ -0,0 +1,320 @@
+/*
+ * include/asm-mips/vr41xx/vr41xx.h
+ *
+ * Include file for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_H
+#define __NEC_VR41XX_H
+
+#include <linux/interrupt.h>
+
+/*
+ * CPU Revision
+ */
+/* VR4122 0x00000c70-0x00000c72 */
+#define PRID_VR4122_REV1_0	0x00000c70
+#define PRID_VR4122_REV2_0	0x00000c70
+#define PRID_VR4122_REV2_1	0x00000c70
+#define PRID_VR4122_REV3_0	0x00000c71
+#define PRID_VR4122_REV3_1	0x00000c72
+
+/* VR4181A 0x00000c73-0x00000c7f */
+#define PRID_VR4181A_REV1_0	0x00000c73
+#define PRID_VR4181A_REV1_1	0x00000c74
+
+/* VR4131 0x00000c80-0x00000c83 */
+#define PRID_VR4131_REV1_2	0x00000c80
+#define PRID_VR4131_REV2_0	0x00000c81
+#define PRID_VR4131_REV2_1	0x00000c82
+#define PRID_VR4131_REV2_2	0x00000c83
+
+/* VR4133 0x00000c84- */
+#define PRID_VR4133		0x00000c84
+
+/*
+ * Bus Control Uint
+ */
+extern unsigned long vr41xx_calculate_clock_frequency(void);
+extern unsigned long vr41xx_get_vtclock_frequency(void);
+extern unsigned long vr41xx_get_tclock_frequency(void);
+
+/*
+ * Clock Mask Unit
+ */
+typedef enum {
+	PIU_CLOCK,
+	SIU_CLOCK,
+	AIU_CLOCK,
+	KIU_CLOCK,
+	FIR_CLOCK,
+	DSIU_CLOCK,
+	CSI_CLOCK,
+	PCIU_CLOCK,
+	HSP_CLOCK,
+	PCI_CLOCK,
+	CEU_CLOCK,
+	ETHER0_CLOCK,
+	ETHER1_CLOCK
+} vr41xx_clock_t;
+
+extern void vr41xx_supply_clock(vr41xx_clock_t clock);
+extern void vr41xx_mask_clock(vr41xx_clock_t clock);
+
+/*
+ * Interrupt Control Unit
+ */
+/* CPU core Interrupt Numbers */
+#define MIPS_CPU_IRQ_BASE	0
+#define MIPS_CPU_IRQ(x)		(MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ	MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ	MIPS_CPU_IRQ(1)
+#define INT0_CASCADE_IRQ	MIPS_CPU_IRQ(2)
+#define INT1_CASCADE_IRQ	MIPS_CPU_IRQ(3)
+#define INT2_CASCADE_IRQ	MIPS_CPU_IRQ(4)
+#define INT3_CASCADE_IRQ	MIPS_CPU_IRQ(5)
+#define INT4_CASCADE_IRQ	MIPS_CPU_IRQ(6)
+#define TIMER_IRQ		MIPS_CPU_IRQ(7)
+
+/* SYINT1 Interrupt Numbers */
+#define SYSINT1_IRQ_BASE	8
+#define SYSINT1_IRQ(x)		(SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ		SYSINT1_IRQ(0)
+#define POWER_IRQ		SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ		SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ		SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ			SYSINT1_IRQ(5)
+#define AIU_IRQ			SYSINT1_IRQ(6)
+#define KIU_IRQ			SYSINT1_IRQ(7)
+#define GIUINT_CASCADE_IRQ	SYSINT1_IRQ(8)
+#define SIU_IRQ			SYSINT1_IRQ(9)
+#define BUSERR_IRQ		SYSINT1_IRQ(10)
+#define SOFTINT_IRQ		SYSINT1_IRQ(11)
+#define CLKRUN_IRQ		SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ		SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST	DOZEPIU_IRQ
+
+/* SYSINT2 Interrupt Numbers */
+#define SYSINT2_IRQ_BASE	24
+#define SYSINT2_IRQ(x)		(SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ		SYSINT2_IRQ(0)
+#define LED_IRQ			SYSINT2_IRQ(1)
+#define HSP_IRQ			SYSINT2_IRQ(2)
+#define TCLOCK_IRQ		SYSINT2_IRQ(3)
+#define FIR_IRQ			SYSINT2_IRQ(4)
+#define CEU_IRQ			SYSINT2_IRQ(4)	/* same number as FIR_IRQ */
+#define DSIU_IRQ		SYSINT2_IRQ(5)
+#define PCI_IRQ			SYSINT2_IRQ(6)
+#define SCU_IRQ			SYSINT2_IRQ(7)
+#define CSI_IRQ			SYSINT2_IRQ(8)
+#define BCU_IRQ			SYSINT2_IRQ(9)
+#define ETHERNET_IRQ		SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST	ETHERNET_IRQ
+
+/* GIU Interrupt Numbers */
+#define GIU_IRQ_BASE		40
+#define GIU_IRQ(x)		(GIU_IRQ_BASE + (x))	/* IRQ 40-71 */
+#define GIU_IRQ_LAST		GIU_IRQ(31)
+#define GIU_IRQ_TO_PIN(x)	((x) - GIU_IRQ_BASE)	/* Pin 0-31 */
+
+extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
+extern int vr41xx_cascade_irq(unsigned int irq, int (*get_irq_number)(int irq));
+
+#define PIUINT_COMMAND		0x0040
+#define PIUINT_DATA		0x0020
+#define PIUINT_PAGE1		0x0010
+#define PIUINT_PAGE0		0x0008
+#define PIUINT_DATALOST		0x0004
+#define PIUINT_STATUSCHANGE	0x0001
+
+extern void vr41xx_enable_piuint(uint16_t mask);
+extern void vr41xx_disable_piuint(uint16_t mask);
+
+#define AIUINT_INPUT_DMAEND	0x0800
+#define AIUINT_INPUT_DMAHALT	0x0400
+#define AIUINT_INPUT_DATALOST	0x0200
+#define AIUINT_INPUT_DATA	0x0100
+#define AIUINT_OUTPUT_DMAEND	0x0008
+#define AIUINT_OUTPUT_DMAHALT	0x0004
+#define AIUINT_OUTPUT_NODATA	0x0002
+
+extern void vr41xx_enable_aiuint(uint16_t mask);
+extern void vr41xx_disable_aiuint(uint16_t mask);
+
+#define KIUINT_DATALOST		0x0004
+#define KIUINT_DATAREADY	0x0002
+#define KIUINT_SCAN		0x0001
+
+extern void vr41xx_enable_kiuint(uint16_t mask);
+extern void vr41xx_disable_kiuint(uint16_t mask);
+
+#define DSIUINT_CTS		0x0800
+#define DSIUINT_RXERR		0x0400
+#define DSIUINT_RX		0x0200
+#define DSIUINT_TX		0x0100
+#define DSIUINT_ALL		0x0f00
+
+extern void vr41xx_enable_dsiuint(uint16_t mask);
+extern void vr41xx_disable_dsiuint(uint16_t mask);
+
+#define FIRINT_UNIT		0x0010
+#define FIRINT_RX_DMAEND	0x0008
+#define FIRINT_RX_DMAHALT	0x0004
+#define FIRINT_TX_DMAEND	0x0002
+#define FIRINT_TX_DMAHALT	0x0001
+
+extern void vr41xx_enable_firint(uint16_t mask);
+extern void vr41xx_disable_firint(uint16_t mask);
+
+extern void vr41xx_enable_pciint(void);
+extern void vr41xx_disable_pciint(void);
+
+extern void vr41xx_enable_scuint(void);
+extern void vr41xx_disable_scuint(void);
+
+#define CSIINT_TX_DMAEND	0x0040
+#define CSIINT_TX_DMAHALT	0x0020
+#define CSIINT_TX_DATA		0x0010
+#define CSIINT_TX_FIFOEMPTY	0x0008
+#define CSIINT_RX_DMAEND	0x0004
+#define CSIINT_RX_DMAHALT	0x0002
+#define CSIINT_RX_FIFOEMPTY	0x0001
+
+extern void vr41xx_enable_csiint(uint16_t mask);
+extern void vr41xx_disable_csiint(uint16_t mask);
+
+extern void vr41xx_enable_bcuint(void);
+extern void vr41xx_disable_bcuint(void);
+
+/*
+ * Power Management Unit
+ */
+
+/*
+ * RTC
+ */
+extern void vr41xx_set_rtclong1_cycle(uint32_t cycles);
+extern uint32_t vr41xx_read_rtclong1_counter(void);
+
+extern void vr41xx_set_rtclong2_cycle(uint32_t cycles);
+extern uint32_t vr41xx_read_rtclong2_counter(void);
+
+extern void vr41xx_set_tclock_cycle(uint32_t cycles);
+extern uint32_t vr41xx_read_tclock_counter(void);
+
+/*
+ * General-Purpose I/O Unit
+ */
+enum {
+	TRIGGER_LEVEL,
+	TRIGGER_EDGE,
+	TRIGGER_EDGE_FALLING,
+	TRIGGER_EDGE_RISING
+};
+
+enum {
+	SIGNAL_THROUGH,
+	SIGNAL_HOLD
+};
+
+extern void vr41xx_set_irq_trigger(int pin, int trigger, int hold);
+
+enum {
+	LEVEL_LOW,
+	LEVEL_HIGH
+};
+
+extern void vr41xx_set_irq_level(int pin, int level);
+
+enum {
+	PIO_INPUT,
+	PIO_OUTPUT
+};
+
+enum {
+	DATA_LOW,
+	DATA_HIGH
+};
+
+/*
+ * PCI Control Unit
+ */
+#define PCI_MASTER_ADDRESS_MASK	0x7fffffffU
+
+struct pci_master_address_conversion {
+	uint32_t bus_base_address;
+	uint32_t address_mask;
+	uint32_t pci_base_address;
+};
+
+struct pci_target_address_conversion {
+	uint32_t address_mask;
+	uint32_t bus_base_address;
+};
+
+typedef enum {
+	CANNOT_LOCK_FROM_DEVICE,
+	CAN_LOCK_FROM_DEVICE,
+} pci_exclusive_access_t;
+
+struct pci_mailbox_address {
+	uint32_t base_address;
+};
+
+struct pci_target_address_window {
+	uint32_t base_address;
+};
+
+typedef enum {
+	PCI_ARBITRATION_MODE_FAIR,
+	PCI_ARBITRATION_MODE_ALTERNATE_0,
+	PCI_ARBITRATION_MODE_ALTERNATE_B,
+} pci_arbiter_priority_control_t;
+
+typedef enum {
+	PCI_TAKE_AWAY_GNT_DISABLE,
+	PCI_TAKE_AWAY_GNT_ENABLE,
+} pci_take_away_gnt_mode_t;
+
+struct pci_controller_unit_setup {
+	struct pci_master_address_conversion *master_memory1;
+	struct pci_master_address_conversion *master_memory2;
+
+	struct pci_target_address_conversion *target_memory1;
+	struct pci_target_address_conversion *target_memory2;
+
+	struct pci_master_address_conversion *master_io;
+
+	pci_exclusive_access_t exclusive_access;
+
+	uint32_t pci_clock_max;
+	uint8_t wait_time_limit_from_irdy_to_trdy;	/* Only VR4122 is supported */
+
+	struct pci_mailbox_address *mailbox;
+	struct pci_target_address_window *target_window1;
+	struct pci_target_address_window *target_window2;
+
+	uint8_t master_latency_timer;
+	uint8_t retry_limit;
+
+	pci_arbiter_priority_control_t arbiter_priority_control;
+	pci_take_away_gnt_mode_t take_away_gnt_mode;
+
+	struct resource *mem_resource;
+	struct resource *io_resource;
+};
+
+extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup);
+
+#endif /* __NEC_VR41XX_H */
diff --git a/include/asm-mips/vr41xx/vrc4173.h b/include/asm-mips/vr41xx/vrc4173.h
new file mode 100644
index 000000000000..58e193c51b45
--- /dev/null
+++ b/include/asm-mips/vr41xx/vrc4173.h
@@ -0,0 +1,222 @@
+/*
+ *  vrc4173.h, Include file for NEC VRC4173.
+ *
+ *  Copyright (C) 2000  Michael R. McDonald
+ *  Copyright (C) 2001-2003 Montavista Software Inc.
+ *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
+ *  Copyright (C) 2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VRC4173_H 
+#define __NEC_VRC4173_H 
+
+#include <linux/config.h>
+#include <asm/io.h>
+
+/*
+ * Interrupt Number
+ */
+#define VRC4173_IRQ_BASE	72
+#define VRC4173_IRQ(x)		(VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ		VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ	VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ	VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ	VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ	VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ		VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ		VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ		VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ		VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ	VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ	VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ	VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST	VRC4173_DOZEPIU_IRQ
+
+/*
+ * PCI I/O accesses
+ */
+#ifdef CONFIG_VRC4173
+
+extern unsigned long vrc4173_io_offset;
+
+#define set_vrc4173_io_offset(offset)	do { vrc4173_io_offset = (offset); } while (0)
+
+#define vrc4173_outb(val,port)		outb((val), vrc4173_io_offset+(port))
+#define vrc4173_outw(val,port)		outw((val), vrc4173_io_offset+(port))
+#define vrc4173_outl(val,port)		outl((val), vrc4173_io_offset+(port))
+#define vrc4173_outb_p(val,port)	outb_p((val), vrc4173_io_offset+(port))
+#define vrc4173_outw_p(val,port)	outw_p((val), vrc4173_io_offset+(port))
+#define vrc4173_outl_p(val,port)	outl_p((val), vrc4173_io_offset+(port))
+
+#define vrc4173_inb(port)		inb(vrc4173_io_offset+(port))
+#define vrc4173_inw(port)		inw(vrc4173_io_offset+(port))
+#define vrc4173_inl(port)		inl(vrc4173_io_offset+(port))
+#define vrc4173_inb_p(port)		inb_p(vrc4173_io_offset+(port))
+#define vrc4173_inw_p(port)		inw_p(vrc4173_io_offset+(port))
+#define vrc4173_inl_p(port)		inl_p(vrc4173_io_offset+(port))
+
+#define vrc4173_outsb(port,addr,count)	outsb(vrc4173_io_offset+(port),(addr),(count))
+#define vrc4173_outsw(port,addr,count)	outsw(vrc4173_io_offset+(port),(addr),(count))
+#define vrc4173_outsl(port,addr,count)	outsl(vrc4173_io_offset+(port),(addr),(count))
+
+#define vrc4173_insb(port,addr,count)	insb(vrc4173_io_offset+(port),(addr),(count))
+#define vrc4173_insw(port,addr,count)	insw(vrc4173_io_offset+(port),(addr),(count))
+#define vrc4173_insl(port,addr,count)	insl(vrc4173_io_offset+(port),(addr),(count))
+
+#else
+
+#define set_vrc4173_io_offset(offset)	do {} while (0)
+
+#define vrc4173_outb(val,port)		do {} while (0)
+#define vrc4173_outw(val,port)		do {} while (0)
+#define vrc4173_outl(val,port)		do {} while (0)
+#define vrc4173_outb_p(val,port)	do {} while (0)
+#define vrc4173_outw_p(val,port)	do {} while (0)
+#define vrc4173_outl_p(val,port)	do {} while (0)
+
+#define vrc4173_inb(port)		0
+#define vrc4173_inw(port)		0
+#define vrc4173_inl(port)		0
+#define vrc4173_inb_p(port)		0
+#define vrc4173_inw_p(port)		0
+#define vrc4173_inl_p(port)		0
+
+#define vrc4173_outsb(port,addr,count)	do {} while (0)
+#define vrc4173_outsw(port,addr,count)	do {} while (0)
+#define vrc4173_outsl(port,addr,count)	do {} while (0)
+
+#define vrc4173_insb(port,addr,count)	do {} while (0)
+#define vrc4173_insw(port,addr,count)	do {} while (0)
+#define vrc4173_insl(port,addr,count)	do {} while (0)
+
+#endif
+
+/*
+ * Clock Mask Unit
+ */
+typedef enum vrc4173_clock {
+	VRC4173_PIU_CLOCK,
+	VRC4173_KIU_CLOCK,
+	VRC4173_AIU_CLOCK,
+	VRC4173_PS2_CH1_CLOCK,
+	VRC4173_PS2_CH2_CLOCK,
+	VRC4173_USBU_PCI_CLOCK,
+	VRC4173_CARDU1_PCI_CLOCK,
+	VRC4173_CARDU2_PCI_CLOCK,
+	VRC4173_AC97U_PCI_CLOCK,
+	VRC4173_USBU_48MHz_CLOCK,
+	VRC4173_EXT_48MHz_CLOCK,
+	VRC4173_48MHz_CLOCK,
+} vrc4173_clock_t;
+
+#ifdef CONFIG_VRC4173
+
+extern void vrc4173_supply_clock(vrc4173_clock_t clock);
+extern void vrc4173_mask_clock(vrc4173_clock_t clock);
+
+#else
+
+static inline void vrc4173_supply_clock(vrc4173_clock_t clock) {}
+static inline void vrc4173_mask_clock(vrc4173_clock_t clock) {}
+
+#endif
+
+/*
+ * Interupt Control Unit
+ */
+
+#define VRC4173_PIUINT_COMMAND		0x0040
+#define VRC4173_PIUINT_DATA		0x0020
+#define VRC4173_PIUINT_PAGE1		0x0010
+#define VRC4173_PIUINT_PAGE0		0x0008
+#define VRC4173_PIUINT_DATALOST		0x0004
+#define VRC4173_PIUINT_STATUSCHANGE	0x0001
+
+#ifdef CONFIG_VRC4173
+
+extern void vrc4173_enable_piuint(uint16_t mask);
+extern void vrc4173_disable_piuint(uint16_t mask);
+
+#else
+
+static inline void vrc4173_enable_piuint(uint16_t mask) {}
+static inline void vrc4173_disable_piuint(uint16_t mask) {}
+
+#endif
+
+#define VRC4173_AIUINT_INPUT_DMAEND	0x0800
+#define VRC4173_AIUINT_INPUT_DMAHALT	0x0400
+#define VRC4173_AIUINT_INPUT_DATALOST	0x0200
+#define VRC4173_AIUINT_INPUT_DATA	0x0100
+#define VRC4173_AIUINT_OUTPUT_DMAEND	0x0008
+#define VRC4173_AIUINT_OUTPUT_DMAHALT	0x0004
+#define VRC4173_AIUINT_OUTPUT_NODATA	0x0002
+
+#ifdef CONFIG_VRC4173
+
+extern void vrc4173_enable_aiuint(uint16_t mask);
+extern void vrc4173_disable_aiuint(uint16_t mask);
+
+#else
+
+static inline void vrc4173_enable_aiuint(uint16_t mask) {}
+static inline void vrc4173_disable_aiuint(uint16_t mask) {}
+
+#endif
+
+#define VRC4173_KIUINT_DATALOST		0x0004
+#define VRC4173_KIUINT_DATAREADY	0x0002
+#define VRC4173_KIUINT_SCAN		0x0001
+
+#ifdef CONFIG_VRC4173
+
+extern void vrc4173_enable_kiuint(uint16_t mask);
+extern void vrc4173_disable_kiuint(uint16_t mask);
+
+#else
+
+static inline void vrc4173_enable_kiuint(uint16_t mask) {}
+static inline void vrc4173_disable_kiuint(uint16_t mask) {}
+
+#endif
+
+/*
+ * General-Purpose I/O Unit
+ */
+typedef enum vrc4173_function {
+	PS2_CHANNEL1,
+	PS2_CHANNEL2,
+	TOUCHPANEL,
+	KEYBOARD_8SCANLINES,
+	KEYBOARD_10SCANLINES,
+	KEYBOARD_12SCANLINES,
+	GPIO_0_15PINS,
+	GPIO_16_20PINS,
+} vrc4173_function_t;
+
+#ifdef CONFIG_VRC4173
+
+extern void vrc4173_select_function(vrc4173_function_t function);
+
+#else
+
+static inline void vrc4173_select_function(vrc4173_function_t function) {}
+
+#endif
+
+#endif /* __NEC_VRC4173_H */
diff --git a/include/asm-mips/vr41xx/workpad.h b/include/asm-mips/vr41xx/workpad.h
new file mode 100644
index 000000000000..dfe01b43fb79
--- /dev/null
+++ b/include/asm-mips/vr41xx/workpad.h
@@ -0,0 +1,43 @@
+/*
+ *  workpad.h, Include file for IBM WorkPad z50.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __IBM_WORKPAD_H
+#define __IBM_WORKPAD_H
+
+#include <asm/addrspace.h>
+#include <asm/vr41xx/vr41xx.h>
+
+/*
+ * Board specific address mapping
+ */
+#define VR41XX_ISA_MEM_BASE		0x10000000
+#define VR41XX_ISA_MEM_SIZE		0x04000000
+
+/* VR41XX_ISA_IO_BASE includes offset from real base. */
+#define VR41XX_ISA_IO_BASE		0x15000000
+#define VR41XX_ISA_IO_SIZE		0x03000000
+
+#define ISA_BUS_IO_BASE			0
+#define ISA_BUS_IO_SIZE			VR41XX_ISA_IO_SIZE
+
+#define IO_PORT_BASE			KSEG1ADDR(VR41XX_ISA_IO_BASE)
+#define IO_PORT_RESOURCE_START		ISA_BUS_IO_BASE
+#define IO_PORT_RESOURCE_END		(ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
+
+#endif /* __IBM_WORKPAD_H */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
new file mode 100644
index 000000000000..c4a704121343
--- /dev/null
+++ b/include/asm-mips/war.h
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004 by Ralf Baechle
+ */
+#ifndef _ASM_WAR_H
+#define _ASM_WAR_H
+
+#include <linux/config.h>
+
+/*
+ * Another R4600 erratum.  Due to the lack of errata information the exact
+ * technical details aren't known.  I've experimentally found that disabling
+ * interrupts during indexed I-cache flushes seems to be sufficient to deal
+ * with the issue.
+ *
+ * #define R4600_V1_INDEX_ICACHEOP_WAR 1
+ */
+
+/*
+ * Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
+ *
+ *  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+ *      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+ *      executed if there is no other dcache activity. If the dcache is
+ *      accessed for another instruction immeidately preceding when these
+ *      cache instructions are executing, it is possible that the dcache
+ *      tag match outputs used by these cache instructions will be
+ *      incorrect. These cache instructions should be preceded by at least
+ *      four instructions that are not any kind of load or store
+ *      instruction.
+ *
+ *      This is not allowed:    lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ *
+ *      This is allowed:        lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ *
+ * #define R4600_V1_HIT_CACHEOP_WAR 1
+ */
+
+
+/*
+ * Writeback and invalidate the primary cache dcache before DMA.
+ *
+ * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+ * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+ * operate correctly if the internal data cache refill buffer is empty.  These
+ * CACHE instructions should be separated from any potential data cache miss
+ * by a load instruction to an uncached address to empty the response buffer."
+ * (Revision 2.0 device errata from IDT available on http://www.idt.com/
+ * in .pdf format.)
+ *
+ * #define R4600_V2_HIT_CACHEOP_WAR 1
+ */
+
+/*
+ * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
+ */
+#ifdef CONFIG_SGI_IP22
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	1
+#define R4600_V1_HIT_CACHEOP_WAR	1
+#define R4600_V2_HIT_CACHEOP_WAR	1
+
+#endif
+
+/*
+ * But the RM200C seems to have been shipped only with V2.0 R4600s
+ */
+#ifdef CONFIG_SNI_RM200_PCI
+
+#define R4600_V2_HIT_CACHEOP_WAR	1
+
+#endif
+
+#ifdef CONFIG_CPU_R5432
+
+/*
+ * When an interrupt happens on a CP0 register read instruction, CPU may
+ * lock up or read corrupted values of CP0 registers after it enters
+ * the exception handler.
+ *
+ * This workaround makes sure that we read a "safe" CP0 register as the
+ * first thing in the exception handler, which breaks one of the
+ * pre-conditions for this problem.
+ */
+#define	R5432_CP0_INTERRUPT_WAR 1
+
+#endif
+
+#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
+    defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+
+/*
+ * Workaround for the Sibyte M3 errata the text of which can be found at
+ *
+ *   http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
+ *
+ * This will enable the use of a special TLB refill handler which does a
+ * consistency check on the information in c0_badvaddr and c0_entryhi and
+ * will just return and take the exception again if the information was
+ * found to be inconsistent.
+ */
+#define BCM1250_M3_WAR 1
+
+/* 
+ * This is a DUART workaround related to glitches around register accesses
+ */
+#define SIBYTE_1956_WAR 1
+
+#endif
+
+/*
+ * Fill buffers not flushed on CACHE instructions
+ * 
+ * Hit_Invalidate_I cacheops invalidate an icache line but the refill
+ * for that line can get stale data from the fill buffer instead of
+ * accessing memory if the previous icache miss was also to that line.
+ *
+ * Workaround: generate an icache refill from a different line
+ *
+ * Affects:
+ *  MIPS 4K		RTL revision <3.0, PRID revision <4
+ */
+#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
+    defined(CONFIG_MIPS_SEAD)
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#endif
+
+/*
+ * Missing implicit forced flush of evictions caused by CACHE
+ * instruction
+ *
+ * Evictions caused by a CACHE instructions are not forced on to the
+ * bus. The BIU gives higher priority to fetches than to the data from
+ * the eviction buffer and no collision detection is performed between
+ * fetches and pending data from the eviction buffer.
+ *
+ * Workaround: Execute a SYNC instruction after the cache instruction
+ *
+ * Affects:
+ *   MIPS 5Kc,5Kf	RTL revision <2.3, PRID revision <8
+ *   MIPS 20Kc		RTL revision <4.0, PRID revision <?
+ */
+#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
+    defined(CONFIG_MIPS_SEAD)
+#define MIPS_CACHE_SYNC_WAR 1
+#endif
+
+/*
+ * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+ * the line which this instruction itself exists, the following
+ * operation is not guaranteed."
+ *
+ * Workaround: do two phase flushing for Index_Invalidate_I
+ */
+#ifdef CONFIG_CPU_TX49XX
+#define TX49XX_ICACHE_INDEX_INV_WAR 1
+#endif
+
+/*
+ * On the RM9000 there is a problem which makes the CreateDirtyExclusive
+ * cache operation unusable on SMP systems.
+ */
+#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE)
+#define  RM9000_CDEX_SMP_WAR		1
+#endif
+
+/*
+ * ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * may cause ll / sc and lld / scd sequences to execute non-atomically.
+ */
+#ifdef CONFIG_SGI_IP27
+#define R10000_LLSC_WAR 1
+#endif
+
+/*
+ * Workarounds default to off
+ */
+#ifndef R4600_V1_INDEX_ICACHEOP_WAR
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#endif
+#ifndef R4600_V1_HIT_CACHEOP_WAR
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#endif
+#ifndef R4600_V2_HIT_CACHEOP_WAR
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#endif
+#ifndef R5432_CP0_INTERRUPT_WAR
+#define R5432_CP0_INTERRUPT_WAR		0
+#endif
+#ifndef BCM1250_M3_WAR
+#define BCM1250_M3_WAR			0
+#endif
+#ifndef SIBYTE_1956_WAR
+#define SIBYTE_1956_WAR			0
+#endif
+#ifndef MIPS4K_ICACHE_REFILL_WAR
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#endif
+#ifndef MIPS_CACHE_SYNC_WAR
+#define MIPS_CACHE_SYNC_WAR		0
+#endif
+#ifndef TX49XX_ICACHE_INDEX_INV_WAR
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#endif
+#ifndef RM9000_CDEX_SMP_WAR
+#define RM9000_CDEX_SMP_WAR		0
+#endif
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR			0
+#endif
+
+#endif /* _ASM_WAR_H */
diff --git a/include/asm-mips/watch.h b/include/asm-mips/watch.h
new file mode 100644
index 000000000000..6aa90cae1114
--- /dev/null
+++ b/include/asm-mips/watch.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2000, 2001 by Ralf Baechle
+ */
+#ifndef _ASM_WATCH_H
+#define _ASM_WATCH_H
+
+#include <linux/linkage.h>
+
+/*
+ * Types of reference for watch_set()
+ */
+enum wref_type {
+	wr_save = 1,
+	wr_load = 2
+};
+
+extern asmlinkage void __watch_set(unsigned long addr, enum wref_type ref);
+extern asmlinkage void __watch_clear(void);
+extern asmlinkage void __watch_reenable(void);
+
+#define watch_set(addr, ref)					\
+	if (cpu_has_watch)					\
+		__watch_set(addr, ref)
+#define watch_clear()						\
+	if (cpu_has_watch)					\
+		__watch_clear()
+#define watch_reenable()					\
+	if (cpu_has_watch)					\
+		__watch_reenable()
+
+#endif /* _ASM_WATCH_H */
diff --git a/include/asm-mips/wbflush.h b/include/asm-mips/wbflush.h
new file mode 100644
index 000000000000..c3bef50f37a8
--- /dev/null
+++ b/include/asm-mips/wbflush.h
@@ -0,0 +1,35 @@
+/*
+ * Header file for using the wbflush routine
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_WBFLUSH_H
+#define _ASM_WBFLUSH_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_CPU_HAS_WB
+
+extern void (*__wbflush)(void);
+extern void wbflush_setup(void);
+
+#define wbflush()			\
+	do {				\
+		__sync();		\
+		__wbflush();		\
+	} while (0)
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wbflush_setup() do { } while (0)
+
+#define wbflush() fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#endif /* _ASM_WBFLUSH_H */
diff --git a/include/asm-mips/xor.h b/include/asm-mips/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-mips/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-mips/xtalk/xtalk.h b/include/asm-mips/xtalk/xtalk.h
new file mode 100644
index 000000000000..4a60f27c8817
--- /dev/null
+++ b/include/asm-mips/xtalk/xtalk.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xtalk.h -- platform-independent crosstalk interface, derived from
+ * IRIX <sys/PCI/bridge.h>, revision 1.38.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XTALK_H
+#define _ASM_XTALK_XTALK_H
+
+#ifndef __ASSEMBLY__
+/*
+ * User-level device driver visible types
+ */
+typedef char            xwidgetnum_t;	/* xtalk widget number  (0..15) */
+
+#define XWIDGET_NONE		-1
+
+typedef int xwidget_part_num_t;	/* xtalk widget part number */
+
+#define XWIDGET_PART_NUM_NONE	-1
+
+typedef int             xwidget_rev_num_t;	/* xtalk widget revision number */
+
+#define XWIDGET_REV_NUM_NONE	-1
+
+typedef int xwidget_mfg_num_t;	/* xtalk widget manufacturing ID */
+
+#define XWIDGET_MFG_NUM_NONE	-1
+
+typedef struct xtalk_piomap_s *xtalk_piomap_t;
+
+/* It is often convenient to fold the XIO target port
+ * number into the XIO address.
+ */
+#define	XIO_NOWHERE	(0xFFFFFFFFFFFFFFFFull)
+#define	XIO_ADDR_BITS	(0x0000FFFFFFFFFFFFull)
+#define	XIO_PORT_BITS	(0xF000000000000000ull)
+#define	XIO_PORT_SHIFT	(60)
+
+#define	XIO_PACKED(x)	(((x)&XIO_PORT_BITS) != 0)
+#define	XIO_ADDR(x)	((x)&XIO_ADDR_BITS)
+#define	XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
+#define	XIO_PACK(p,o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XTALK_H */
diff --git a/include/asm-mips/xtalk/xwidget.h b/include/asm-mips/xtalk/xwidget.h
new file mode 100644
index 000000000000..b4a13d7405ee
--- /dev/null
+++ b/include/asm-mips/xtalk/xwidget.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xwidget.h - generic crosstalk widget header file, derived from IRIX
+ * <sys/xtalk/xtalkwidget.h>, revision 1.32.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XWIDGET_H
+#define _ASM_XTALK_XWIDGET_H
+
+#include <linux/types.h>
+#include <asm/xtalk/xtalk.h>
+
+#define WIDGET_ID			0x04
+#define WIDGET_STATUS			0x0c
+#define WIDGET_ERR_UPPER_ADDR		0x14
+#define WIDGET_ERR_LOWER_ADDR		0x1c
+#define WIDGET_CONTROL			0x24
+#define WIDGET_REQ_TIMEOUT		0x2c
+#define WIDGET_INTDEST_UPPER_ADDR	0x34
+#define WIDGET_INTDEST_LOWER_ADDR	0x3c
+#define WIDGET_ERR_CMD_WORD		0x44
+#define WIDGET_LLP_CFG			0x4c
+#define WIDGET_TFLUSH			0x54
+
+/* WIDGET_ID */
+#define WIDGET_REV_NUM			0xf0000000
+#define WIDGET_PART_NUM			0x0ffff000
+#define WIDGET_MFG_NUM			0x00000ffe
+#define WIDGET_REV_NUM_SHFT		28
+#define WIDGET_PART_NUM_SHFT		12
+#define WIDGET_MFG_NUM_SHFT		1
+
+#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT)
+#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT)
+#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT)
+
+/* WIDGET_STATUS */
+#define WIDGET_LLP_REC_CNT		0xff000000
+#define WIDGET_LLP_TX_CNT		0x00ff0000
+#define WIDGET_PENDING			0x0000001f
+
+/* WIDGET_ERR_UPPER_ADDR */
+#define	WIDGET_ERR_UPPER_ADDR_ONLY	0x0000ffff
+
+/* WIDGET_CONTROL */
+#define WIDGET_F_BAD_PKT		0x00010000
+#define WIDGET_LLP_XBAR_CRD		0x0000f000
+#define	WIDGET_LLP_XBAR_CRD_SHFT	12
+#define WIDGET_CLR_RLLP_CNT		0x00000800
+#define WIDGET_CLR_TLLP_CNT		0x00000400
+#define WIDGET_SYS_END			0x00000200
+#define WIDGET_MAX_TRANS		0x000001f0
+#define WIDGET_WIDGET_ID		0x0000000f
+
+/* WIDGET_INTDEST_UPPER_ADDR */
+#define WIDGET_INT_VECTOR		0xff000000
+#define WIDGET_INT_VECTOR_SHFT		24
+#define WIDGET_TARGET_ID		0x000f0000
+#define WIDGET_TARGET_ID_SHFT		16
+#define WIDGET_UPP_ADDR			0x0000ffff
+
+/* WIDGET_ERR_CMD_WORD */
+#define WIDGET_DIDN			0xf0000000
+#define WIDGET_SIDN			0x0f000000
+#define WIDGET_PACTYP			0x00f00000
+#define WIDGET_TNUM			0x000f8000
+#define WIDGET_COHERENT			0x00004000
+#define WIDGET_DS			0x00003000
+#define WIDGET_GBR			0x00000800
+#define WIDGET_VBPM			0x00000400
+#define WIDGET_ERROR			0x00000200
+#define WIDGET_BARRIER			0x00000100
+
+/* WIDGET_LLP_CFG */
+#define WIDGET_LLP_MAXRETRY		0x03ff0000
+#define WIDGET_LLP_MAXRETRY_SHFT	16
+#define WIDGET_LLP_NULLTIMEOUT		0x0000fc00
+#define WIDGET_LLP_NULLTIMEOUT_SHFT	10
+#define WIDGET_LLP_MAXBURST		0x000003ff
+#define WIDGET_LLP_MAXBURST_SHFT	0
+
+/*
+ * according to the crosstalk spec, only 32-bits access to the widget
+ * configuration registers is allowed.  some widgets may allow 64-bits
+ * access but software should not depend on it.  registers beyond the
+ * widget target flush register are widget dependent thus will not be
+ * defined here
+ */
+#ifndef __ASSEMBLY__
+typedef u32 widgetreg_t;
+
+/* widget configuration registers */
+typedef volatile struct widget_cfg {
+	widgetreg_t		w_pad_0;		/* 0x00 */
+	widgetreg_t		w_id;			/* 0x04 */
+	widgetreg_t		w_pad_1;		/* 0x08 */
+	widgetreg_t		w_status;		/* 0x0c */
+	widgetreg_t		w_pad_2;		/* 0x10 */
+	widgetreg_t		w_err_upper_addr;	/* 0x14 */
+	widgetreg_t		w_pad_3;		/* 0x18 */
+	widgetreg_t		w_err_lower_addr;	/* 0x1c */
+	widgetreg_t		w_pad_4;		/* 0x20 */
+	widgetreg_t		w_control;		/* 0x24 */
+	widgetreg_t		w_pad_5;		/* 0x28 */
+	widgetreg_t		w_req_timeout;		/* 0x2c */
+	widgetreg_t		w_pad_6;		/* 0x30 */
+	widgetreg_t		w_intdest_upper_addr;	/* 0x34 */
+	widgetreg_t		w_pad_7;		/* 0x38 */
+	widgetreg_t		w_intdest_lower_addr;	/* 0x3c */
+	widgetreg_t		w_pad_8;		/* 0x40 */
+	widgetreg_t		w_err_cmd_word;		/* 0x44 */
+	widgetreg_t		w_pad_9;		/* 0x48 */
+	widgetreg_t		w_llp_cfg;		/* 0x4c */
+	widgetreg_t		w_pad_10;		/* 0x50 */
+	widgetreg_t		w_tflush;		/* 0x54 */
+} widget_cfg_t;
+
+typedef struct {
+	unsigned	didn:4;
+	unsigned	sidn:4;
+	unsigned	pactyp:4;
+	unsigned	tnum:5;
+	unsigned	ct:1;
+	unsigned	ds:2;
+	unsigned	gbr:1;
+	unsigned	vbpm:1;
+	unsigned	error:1;
+	unsigned	bo:1;
+	unsigned	other:8;
+} w_err_cmd_word_f;
+
+typedef union {
+	widgetreg_t		r;
+	w_err_cmd_word_f	f;
+} w_err_cmd_word_u;
+
+typedef struct xwidget_info_s *xwidget_info_t;
+
+/*
+ * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec.
+ */
+typedef struct xwidget_hwid_s {
+	xwidget_part_num_t	part_num;
+	xwidget_rev_num_t	rev_num;
+	xwidget_mfg_num_t	mfg_num;
+} *xwidget_hwid_t;
+
+
+/*
+ * Returns 1 if a driver that handles devices described by hwid1 is able
+ * to manage a device with hardwareid hwid2.  NOTE: We don't check rev
+ * numbers at all.
+ */
+#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \
+	(((hwid1)->part_num == (hwid2)->part_num) && \
+	(((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid1)->mfg_num == (hwid2)->mfg_num)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XWIDGET_H */
diff --git a/include/asm-mips/xxs1500.h b/include/asm-mips/xxs1500.h
new file mode 100644
index 000000000000..75c0ddfeca13
--- /dev/null
+++ b/include/asm-mips/xxs1500.h
@@ -0,0 +1,35 @@
+/*
+ * MyCable XXS1500 Referrence Board
+ *
+ * Copyright 2003 MontaVista Software Inc.
+ * Author: Pete Popov, MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * 
+ */
+#ifndef __ASM_XXS1500_H
+#define __ASM_XXS1500_H
+
+/* PCMCIA XXS1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_IRQ AU1000_GPIO_4
+
+#endif /* __ASM_XXS1500_ */
diff --git a/include/asm-parisc/a.out.h b/include/asm-parisc/a.out.h
new file mode 100644
index 000000000000..2a490cc9ec91
--- /dev/null
+++ b/include/asm-parisc/a.out.h
@@ -0,0 +1,29 @@
+#ifndef __PARISC_A_OUT_H__
+#define __PARISC_A_OUT_H__
+
+struct exec
+{
+  unsigned int a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+/* XXX: STACK_TOP actually should be STACK_BOTTOM for parisc.
+ * prumpf */
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-parisc/asmregs.h b/include/asm-parisc/asmregs.h
new file mode 100644
index 000000000000..d93c646e1887
--- /dev/null
+++ b/include/asm-parisc/asmregs.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 1999 Hewlett-Packard (Frank Rowand)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2, or (at your option)
+ *	any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PARISC_ASMREGS_H
+#define _PARISC_ASMREGS_H
+
+;! General Registers
+
+rp:	.reg	%r2
+arg3:	.reg	%r23
+arg2:	.reg	%r24
+arg1:	.reg	%r25
+arg0:	.reg	%r26
+dp:	.reg	%r27
+ret0:	.reg	%r28
+ret1:	.reg	%r29
+sl:	.reg	%r29
+sp:	.reg	%r30
+
+#if 0
+/* PA20_REVISIT */
+arg7:	.reg	r19
+arg6:	.reg	r20
+arg5:	.reg	r21
+arg4:	.reg	r22
+gp:	.reg	r27
+ap:	.reg	r29
+#endif
+
+
+r0:	.reg	%r0
+r1:	.reg	%r1
+r2:	.reg	%r2
+r3:	.reg	%r3
+r4:	.reg	%r4
+r5:	.reg	%r5
+r6:	.reg	%r6
+r7:	.reg	%r7
+r8:	.reg	%r8
+r9:	.reg	%r9
+r10:	.reg	%r10
+r11:	.reg	%r11
+r12:	.reg	%r12
+r13:	.reg	%r13
+r14:	.reg	%r14
+r15:	.reg	%r15
+r16:	.reg	%r16
+r17:	.reg	%r17
+r18:	.reg	%r18
+r19:	.reg	%r19
+r20:	.reg	%r20
+r21:	.reg	%r21
+r22:	.reg	%r22
+r23:	.reg	%r23
+r24:	.reg	%r24
+r25:	.reg	%r25
+r26:	.reg	%r26
+r27:	.reg	%r27
+r28:	.reg	%r28
+r29:	.reg	%r29
+r30:	.reg	%r30
+r31:	.reg	%r31
+
+
+;! Space Registers
+
+sr0:	.reg	%sr0
+sr1:	.reg	%sr1
+sr2:	.reg	%sr2
+sr3:	.reg	%sr3
+sr4:	.reg	%sr4
+sr5:	.reg	%sr5
+sr6:	.reg	%sr6
+sr7:	.reg	%sr7
+
+
+;! Floating Point Registers
+
+fr0:	.reg	%fr0
+fr1:	.reg	%fr1
+fr2:	.reg	%fr2
+fr3:	.reg	%fr3
+fr4:	.reg	%fr4
+fr5:	.reg	%fr5
+fr6:	.reg	%fr6
+fr7:	.reg	%fr7
+fr8:	.reg	%fr8
+fr9:	.reg	%fr9
+fr10:	.reg	%fr10
+fr11:	.reg	%fr11
+fr12:	.reg	%fr12
+fr13:	.reg	%fr13
+fr14:	.reg	%fr14
+fr15:	.reg	%fr15
+fr16:	.reg	%fr16
+fr17:	.reg	%fr17
+fr18:	.reg	%fr18
+fr19:	.reg	%fr19
+fr20:	.reg	%fr20
+fr21:	.reg	%fr21
+fr22:	.reg	%fr22
+fr23:	.reg	%fr23
+fr24:	.reg	%fr24
+fr25:	.reg	%fr25
+fr26:	.reg	%fr26
+fr27:	.reg	%fr27
+fr28:	.reg	%fr28
+fr29:	.reg	%fr29
+fr30:	.reg	%fr30
+fr31:	.reg	%fr31
+
+
+;! Control Registers
+
+rctr:	.reg	%cr0
+pidr1:	.reg	%cr8
+pidr2:	.reg	%cr9
+ccr:	.reg	%cr10
+sar:	.reg	%cr11
+pidr3:	.reg	%cr12
+pidr4:	.reg	%cr13
+iva:	.reg	%cr14
+eiem:	.reg	%cr15
+itmr:	.reg	%cr16
+pcsq:	.reg	%cr17
+pcoq:	.reg	%cr18
+iir:	.reg	%cr19
+isr:	.reg	%cr20
+ior:	.reg	%cr21
+ipsw:	.reg	%cr22
+eirr:	.reg	%cr23
+tr0:	.reg	%cr24
+tr1:	.reg	%cr25
+tr2:	.reg	%cr26
+tr3:	.reg	%cr27
+tr4:	.reg	%cr28
+tr5:	.reg	%cr29
+tr6:	.reg	%cr30
+tr7:	.reg	%cr31
+
+
+cr0:	.reg	%cr0
+cr8:	.reg	%cr8
+cr9:	.reg	%cr9
+cr10:	.reg	%cr10
+cr11:	.reg	%cr11
+cr12:	.reg	%cr12
+cr13:	.reg	%cr13
+cr14:	.reg	%cr14
+cr15:	.reg	%cr15
+cr16:	.reg	%cr16
+cr17:	.reg	%cr17
+cr18:	.reg	%cr18
+cr19:	.reg	%cr19
+cr20:	.reg	%cr20
+cr21:	.reg	%cr21
+cr22:	.reg	%cr22
+cr23:	.reg	%cr23
+cr24:	.reg	%cr24
+cr25:	.reg	%cr25
+cr26:	.reg	%cr26
+cr27:	.reg	%cr27
+cr28:	.reg	%cr28
+cr29:	.reg	%cr29
+cr30:	.reg	%cr30
+cr31:	.reg	%cr31
+
+#endif
diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h
new file mode 100644
index 000000000000..cbc286f49b36
--- /dev/null
+++ b/include/asm-parisc/assembly.h
@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 1999 Hewlett-Packard (Frank Rowand)
+ * Copyright (C) 1999 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 1999 SuSE GmbH
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PARISC_ASSEMBLY_H
+#define _PARISC_ASSEMBLY_H
+
+#ifdef __LP64__
+#define LDREG	ldd
+#define STREG	std
+#define LDREGX  ldd,s
+#define LDREGM	ldd,mb
+#define STREGM	std,ma
+#define SHRREG  shrd
+#define RP_OFFSET	16
+#define FRAME_SIZE	128
+#define CALLEE_SAVE_FRAME_SIZE	144
+#else
+#define LDREG	ldw
+#define STREG	stw
+#define LDREGX  ldwx,s
+#define LDREGM	ldwm
+#define STREGM	stwm
+#define SHRREG  shr
+#define RP_OFFSET	20
+#define FRAME_SIZE	64
+#define CALLEE_SAVE_FRAME_SIZE	128
+#endif
+
+#ifdef CONFIG_PA20
+#define BL		b,l
+# ifdef CONFIG_64BIT
+#  define LEVEL		2.0w
+# else
+#  define LEVEL		2.0
+# endif
+#else
+#define BL		bl
+#define LEVEL		1.1
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef __LP64__
+/* the 64-bit pa gnu assembler unfortunately defaults to .level 1.1 or 2.0 so
+ * work around that for now... */
+	.level 2.0w
+#endif
+
+#include <asm/offsets.h>
+#include <asm/page.h>
+
+#include <asm/asmregs.h>
+
+	sp	=	30
+	gp	=	27
+	ipsw	=	22
+
+	/*
+	 * We provide two versions of each macro to convert from physical
+	 * to virtual and vice versa. The "_r1" versions take one argument
+	 * register, but trashes r1 to do the conversion. The other
+	 * version takes two arguments: a src and destination register.
+	 * However, the source and destination registers can not be
+	 * the same register.
+	 */
+
+	.macro  tophys  grvirt, grphys
+	ldil    L%(__PAGE_OFFSET), \grphys
+	sub     \grvirt, \grphys, \grphys
+	.endm
+	
+	.macro  tovirt  grphys, grvirt
+	ldil    L%(__PAGE_OFFSET), \grvirt
+	add     \grphys, \grvirt, \grvirt
+	.endm
+
+	.macro  tophys_r1  gr
+	ldil    L%(__PAGE_OFFSET), %r1
+	sub     \gr, %r1, \gr
+	.endm
+	
+	.macro  tovirt_r1  gr
+	ldil    L%(__PAGE_OFFSET), %r1
+	add     \gr, %r1, \gr
+	.endm
+
+	.macro delay value
+	ldil	L%\value, 1
+	ldo	R%\value(1), 1
+	addib,UV,n -1,1,.
+	addib,NUV,n -1,1,.+8
+	nop
+	.endm
+
+	.macro	debug value
+	.endm
+
+
+	/* Shift Left - note the r and t can NOT be the same! */
+	.macro shl r, sa, t
+	dep,z	\r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* The PA 2.0 shift left */
+	.macro shlw r, sa, t
+	depw,z	\r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* And the PA 2.0W shift left */
+	.macro shld r, sa, t
+	depd,z	\r, 63-\sa, 64-\sa, \t
+	.endm
+
+	/* Shift Right - note the r and t can NOT be the same! */
+	.macro shr r, sa, t
+	extru \r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* pa20w version of shift right */
+	.macro shrd r, sa, t
+	extrd,u \r, 63-\sa, 64-\sa, \t
+	.endm
+
+	/* load 32-bit 'value' into 'reg' compensating for the ldil
+	 * sign-extension when running in wide mode.
+	 * WARNING!! neither 'value' nor 'reg' can be expressions
+	 * containing '.'!!!! */
+	.macro	load32 value, reg
+	ldil	L%\value, \reg
+	ldo	R%\value(\reg), \reg
+	.endm
+
+	.macro loadgp
+#ifdef __LP64__
+	ldil		L%__gp, %r27
+	ldo		R%__gp(%r27), %r27
+#else
+	ldil		L%$global$, %r27
+	ldo		R%$global$(%r27), %r27
+#endif
+	.endm
+
+#define SAVE_SP(r, where) mfsp r, %r1 ! STREG %r1, where
+#define REST_SP(r, where) LDREG where, %r1 ! mtsp %r1, r
+#define SAVE_CR(r, where) mfctl r, %r1 ! STREG %r1, where
+#define REST_CR(r, where) LDREG where, %r1 ! mtctl %r1, r
+
+	.macro	save_general	regs
+	STREG %r1, PT_GR1 (\regs)
+	STREG %r2, PT_GR2 (\regs)
+	STREG %r3, PT_GR3 (\regs)
+	STREG %r4, PT_GR4 (\regs)
+	STREG %r5, PT_GR5 (\regs)
+	STREG %r6, PT_GR6 (\regs)
+	STREG %r7, PT_GR7 (\regs)
+	STREG %r8, PT_GR8 (\regs)
+	STREG %r9, PT_GR9 (\regs)
+	STREG %r10, PT_GR10(\regs)
+	STREG %r11, PT_GR11(\regs)
+	STREG %r12, PT_GR12(\regs)
+	STREG %r13, PT_GR13(\regs)
+	STREG %r14, PT_GR14(\regs)
+	STREG %r15, PT_GR15(\regs)
+	STREG %r16, PT_GR16(\regs)
+	STREG %r17, PT_GR17(\regs)
+	STREG %r18, PT_GR18(\regs)
+	STREG %r19, PT_GR19(\regs)
+	STREG %r20, PT_GR20(\regs)
+	STREG %r21, PT_GR21(\regs)
+	STREG %r22, PT_GR22(\regs)
+	STREG %r23, PT_GR23(\regs)
+	STREG %r24, PT_GR24(\regs)
+	STREG %r25, PT_GR25(\regs)
+	/* r26 is saved in get_stack and used to preserve a value across virt_map */
+	STREG %r27, PT_GR27(\regs)
+	STREG %r28, PT_GR28(\regs)
+	/* r29 is saved in get_stack and used to point to saved registers */
+	/* r30 stack pointer saved in get_stack */
+	STREG %r31, PT_GR31(\regs)
+	.endm
+
+	.macro	rest_general	regs
+	/* r1 used as a temp in rest_stack and is restored there */
+	LDREG PT_GR2 (\regs), %r2
+	LDREG PT_GR3 (\regs), %r3
+	LDREG PT_GR4 (\regs), %r4
+	LDREG PT_GR5 (\regs), %r5
+	LDREG PT_GR6 (\regs), %r6
+	LDREG PT_GR7 (\regs), %r7
+	LDREG PT_GR8 (\regs), %r8
+	LDREG PT_GR9 (\regs), %r9
+	LDREG PT_GR10(\regs), %r10
+	LDREG PT_GR11(\regs), %r11
+	LDREG PT_GR12(\regs), %r12
+	LDREG PT_GR13(\regs), %r13
+	LDREG PT_GR14(\regs), %r14
+	LDREG PT_GR15(\regs), %r15
+	LDREG PT_GR16(\regs), %r16
+	LDREG PT_GR17(\regs), %r17
+	LDREG PT_GR18(\regs), %r18
+	LDREG PT_GR19(\regs), %r19
+	LDREG PT_GR20(\regs), %r20
+	LDREG PT_GR21(\regs), %r21
+	LDREG PT_GR22(\regs), %r22
+	LDREG PT_GR23(\regs), %r23
+	LDREG PT_GR24(\regs), %r24
+	LDREG PT_GR25(\regs), %r25
+	LDREG PT_GR26(\regs), %r26
+	LDREG PT_GR27(\regs), %r27
+	LDREG PT_GR28(\regs), %r28
+	/* r29 points to register save area, and is restored in rest_stack */
+	/* r30 stack pointer restored in rest_stack */
+	LDREG PT_GR31(\regs), %r31
+	.endm
+
+	.macro	save_fp 	regs
+	fstd,ma  %fr0, 8(\regs)
+	fstd,ma	 %fr1, 8(\regs)
+	fstd,ma	 %fr2, 8(\regs)
+	fstd,ma	 %fr3, 8(\regs)
+	fstd,ma	 %fr4, 8(\regs)
+	fstd,ma	 %fr5, 8(\regs)
+	fstd,ma	 %fr6, 8(\regs)
+	fstd,ma	 %fr7, 8(\regs)
+	fstd,ma	 %fr8, 8(\regs)
+	fstd,ma	 %fr9, 8(\regs)
+	fstd,ma	%fr10, 8(\regs)
+	fstd,ma	%fr11, 8(\regs)
+	fstd,ma	%fr12, 8(\regs)
+	fstd,ma	%fr13, 8(\regs)
+	fstd,ma	%fr14, 8(\regs)
+	fstd,ma	%fr15, 8(\regs)
+	fstd,ma	%fr16, 8(\regs)
+	fstd,ma	%fr17, 8(\regs)
+	fstd,ma	%fr18, 8(\regs)
+	fstd,ma	%fr19, 8(\regs)
+	fstd,ma	%fr20, 8(\regs)
+	fstd,ma	%fr21, 8(\regs)
+	fstd,ma	%fr22, 8(\regs)
+	fstd,ma	%fr23, 8(\regs)
+	fstd,ma	%fr24, 8(\regs)
+	fstd,ma	%fr25, 8(\regs)
+	fstd,ma	%fr26, 8(\regs)
+	fstd,ma	%fr27, 8(\regs)
+	fstd,ma	%fr28, 8(\regs)
+	fstd,ma	%fr29, 8(\regs)
+	fstd,ma	%fr30, 8(\regs)
+	fstd	%fr31, 0(\regs)
+	.endm
+
+	.macro	rest_fp 	regs
+	fldd	0(\regs),	 %fr31
+	fldd,mb	-8(\regs),       %fr30
+	fldd,mb	-8(\regs),       %fr29
+	fldd,mb	-8(\regs),       %fr28
+	fldd,mb	-8(\regs),       %fr27
+	fldd,mb	-8(\regs),       %fr26
+	fldd,mb	-8(\regs),       %fr25
+	fldd,mb	-8(\regs),       %fr24
+	fldd,mb	-8(\regs),       %fr23
+	fldd,mb	-8(\regs),       %fr22
+	fldd,mb	-8(\regs),       %fr21
+	fldd,mb	-8(\regs),       %fr20
+	fldd,mb	-8(\regs),       %fr19
+	fldd,mb	-8(\regs),       %fr18
+	fldd,mb	-8(\regs),       %fr17
+	fldd,mb	-8(\regs),       %fr16
+	fldd,mb	-8(\regs),       %fr15
+	fldd,mb	-8(\regs),       %fr14
+	fldd,mb	-8(\regs),       %fr13
+	fldd,mb	-8(\regs),       %fr12
+	fldd,mb	-8(\regs),       %fr11
+	fldd,mb	-8(\regs),       %fr10
+	fldd,mb	-8(\regs),       %fr9
+	fldd,mb	-8(\regs),       %fr8
+	fldd,mb	-8(\regs),       %fr7
+	fldd,mb	-8(\regs),       %fr6
+	fldd,mb	-8(\regs),       %fr5
+	fldd,mb	-8(\regs),       %fr4
+	fldd,mb	-8(\regs),       %fr3
+	fldd,mb	-8(\regs),       %fr2
+	fldd,mb	-8(\regs),       %fr1
+	fldd,mb	-8(\regs),       %fr0
+	.endm
+
+#ifdef __LP64__
+	.macro	callee_save
+	std,ma	  %r3,	CALLEE_SAVE_FRAME_SIZE(%r30)
+	mfctl	  %cr27, %r3
+	std	  %r4,	-136(%r30)
+	std	  %r5,	-128(%r30)
+	std	  %r6,	-120(%r30)
+	std	  %r7,	-112(%r30)
+	std	  %r8,	-104(%r30)
+	std	  %r9,	 -96(%r30)
+	std	 %r10,	 -88(%r30)
+	std	 %r11,	 -80(%r30)
+	std	 %r12,	 -72(%r30)
+	std	 %r13,	 -64(%r30)
+	std	 %r14,	 -56(%r30)
+	std	 %r15,	 -48(%r30)
+	std	 %r16,	 -40(%r30)
+	std	 %r17,	 -32(%r30)
+	std	 %r18,	 -24(%r30)
+	std	  %r3,	 -16(%r30)
+	.endm
+
+	.macro	callee_rest
+	ldd	 -16(%r30),    %r3
+	ldd	 -24(%r30),   %r18
+	ldd	 -32(%r30),   %r17
+	ldd	 -40(%r30),   %r16
+	ldd	 -48(%r30),   %r15
+	ldd	 -56(%r30),   %r14
+	ldd	 -64(%r30),   %r13
+	ldd	 -72(%r30),   %r12
+	ldd	 -80(%r30),   %r11
+	ldd	 -88(%r30),   %r10
+	ldd	 -96(%r30),    %r9
+	ldd	-104(%r30),    %r8
+	ldd	-112(%r30),    %r7
+	ldd	-120(%r30),    %r6
+	ldd	-128(%r30),    %r5
+	ldd	-136(%r30),    %r4
+	mtctl	%r3, %cr27
+	ldd,mb	-CALLEE_SAVE_FRAME_SIZE(%r30),    %r3
+	.endm
+
+#else /* ! __LP64__ */
+
+	.macro	callee_save
+	stw,ma	 %r3,	CALLEE_SAVE_FRAME_SIZE(%r30)
+	mfctl	 %cr27, %r3
+	stw	 %r4,	-124(%r30)
+	stw	 %r5,	-120(%r30)
+	stw	 %r6,	-116(%r30)
+	stw	 %r7,	-112(%r30)
+	stw	 %r8,	-108(%r30)
+	stw	 %r9,	-104(%r30)
+	stw	 %r10,	-100(%r30)
+	stw	 %r11,	 -96(%r30)
+	stw	 %r12,	 -92(%r30)
+	stw	 %r13,	 -88(%r30)
+	stw	 %r14,	 -84(%r30)
+	stw	 %r15,	 -80(%r30)
+	stw	 %r16,	 -76(%r30)
+	stw	 %r17,	 -72(%r30)
+	stw	 %r18,	 -68(%r30)
+	stw	  %r3,	 -64(%r30)
+	.endm
+
+	.macro	callee_rest
+	ldw	 -64(%r30),    %r3
+	ldw	 -68(%r30),   %r18
+	ldw	 -72(%r30),   %r17
+	ldw	 -76(%r30),   %r16
+	ldw	 -80(%r30),   %r15
+	ldw	 -84(%r30),   %r14
+	ldw	 -88(%r30),   %r13
+	ldw	 -92(%r30),   %r12
+	ldw	 -96(%r30),   %r11
+	ldw	-100(%r30),   %r10
+	ldw	-104(%r30),   %r9
+	ldw	-108(%r30),   %r8
+	ldw	-112(%r30),   %r7
+	ldw	-116(%r30),   %r6
+	ldw	-120(%r30),   %r5
+	ldw	-124(%r30),   %r4
+	mtctl	%r3, %cr27
+	ldw,mb	-CALLEE_SAVE_FRAME_SIZE(%r30),   %r3
+	.endm
+#endif /* ! __LP64__ */
+
+	.macro	save_specials	regs
+
+	SAVE_SP  (%sr0, PT_SR0 (\regs))
+	SAVE_SP  (%sr1, PT_SR1 (\regs))
+	SAVE_SP  (%sr2, PT_SR2 (\regs))
+	SAVE_SP  (%sr3, PT_SR3 (\regs))
+	SAVE_SP  (%sr4, PT_SR4 (\regs))
+	SAVE_SP  (%sr5, PT_SR5 (\regs))
+	SAVE_SP  (%sr6, PT_SR6 (\regs))
+	SAVE_SP  (%sr7, PT_SR7 (\regs))
+
+	SAVE_CR  (%cr17, PT_IASQ0(\regs))
+	mtctl	 %r0,	%cr17
+	SAVE_CR  (%cr17, PT_IASQ1(\regs))
+
+	SAVE_CR  (%cr18, PT_IAOQ0(\regs))
+	mtctl	 %r0,	%cr18
+	SAVE_CR  (%cr18, PT_IAOQ1(\regs))
+
+#ifdef __LP64__
+	/* cr11 (sar) is a funny one.  5 bits on PA1.1 and 6 bit on PA2.0
+	 * For PA2.0 mtsar or mtctl always write 6 bits, but mfctl only
+	 * reads 5 bits.  Use mfctl,w to read all six bits.  Otherwise
+	 * we lose the 6th bit on a save/restore over interrupt.
+	 */
+	mfctl,w  %cr11, %r1
+	STREG    %r1, PT_SAR (\regs)
+#else
+	SAVE_CR  (%cr11, PT_SAR  (\regs))
+#endif
+	SAVE_CR  (%cr19, PT_IIR  (\regs))
+
+	/*
+	 * Code immediately following this macro (in intr_save) relies
+	 * on r8 containing ipsw.
+	 */
+	mfctl    %cr22, %r8
+	STREG    %r8,   PT_PSW(\regs)
+	.endm
+
+	.macro	rest_specials	regs
+
+	REST_SP  (%sr0, PT_SR0 (\regs))
+	REST_SP  (%sr1, PT_SR1 (\regs))
+	REST_SP  (%sr2, PT_SR2 (\regs))
+	REST_SP  (%sr3, PT_SR3 (\regs))
+	REST_SP  (%sr4, PT_SR4 (\regs))
+	REST_SP  (%sr5, PT_SR5 (\regs))
+	REST_SP  (%sr6, PT_SR6 (\regs))
+	REST_SP  (%sr7, PT_SR7 (\regs))
+
+	REST_CR	(%cr17, PT_IASQ0(\regs))
+	REST_CR	(%cr17, PT_IASQ1(\regs))
+
+	REST_CR	(%cr18, PT_IAOQ0(\regs))
+	REST_CR	(%cr18, PT_IAOQ1(\regs))
+
+	REST_CR (%cr11, PT_SAR	(\regs))
+
+	REST_CR	(%cr22, PT_PSW	(\regs))
+	.endm
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/include/asm-parisc/atomic.h b/include/asm-parisc/atomic.h
new file mode 100644
index 000000000000..e24f7579adb0
--- /dev/null
+++ b/include/asm-parisc/atomic.h
@@ -0,0 +1,199 @@
+#ifndef _ASM_PARISC_ATOMIC_H_
+#define _ASM_PARISC_ATOMIC_H_
+
+#include <linux/config.h>
+#include <asm/system.h>
+/* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.  */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * And probably incredibly slow on parisc.  OTOH, we don't
+ * have to write any serious assembly.   prumpf
+ */
+
+#ifdef CONFIG_SMP
+#include <asm/spinlock.h>
+#include <asm/cache.h>		/* we use L1_CACHE_BYTES */
+
+/* Use an array of spinlocks for our atomic_ts.
+ * Hash function to index into a different SPINLOCK.
+ * Since "a" is usually an address, use one spinlock per cacheline.
+ */
+#  define ATOMIC_HASH_SIZE 4
+#  define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
+
+extern spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
+
+/* Can't use _raw_spin_lock_irq because of #include problems, so
+ * this is the substitute */
+#define _atomic_spin_lock_irqsave(l,f) do {	\
+	spinlock_t *s = ATOMIC_HASH(l);		\
+	local_irq_save(f);			\
+	_raw_spin_lock(s);			\
+} while(0)
+
+#define _atomic_spin_unlock_irqrestore(l,f) do {	\
+	spinlock_t *s = ATOMIC_HASH(l);			\
+	_raw_spin_unlock(s);				\
+	local_irq_restore(f);				\
+} while(0)
+
+
+#else
+#  define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
+#  define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
+#endif
+
+/* Note that we need not lock read accesses - aligned word writes/reads
+ * are atomic, so a reader never sees unconsistent values.
+ *
+ * Cache-line alignment would conflict with, for example, linux/module.h
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+
+/* This should get optimized out since it's never called.
+** Or get a link error if xchg is used "wrong".
+*/
+extern void __xchg_called_with_bad_pointer(void);
+
+
+/* __xchg32/64 defined in arch/parisc/lib/bitops.c */
+extern unsigned long __xchg8(char, char *);
+extern unsigned long __xchg32(int, int *);
+#ifdef __LP64__
+extern unsigned long __xchg64(unsigned long, unsigned long *);
+#endif
+
+/* optimizer better get rid of switch since size is a constant */
+static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+                                       int size)
+{
+
+	switch(size) {
+#ifdef __LP64__
+	case 8: return __xchg64(x,(unsigned long *) ptr);
+#endif
+	case 4: return __xchg32((int) x, (int *) ptr);
+	case 1: return __xchg8((char) x, (char *) ptr);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+
+/*
+** REVISIT - Abandoned use of LDCW in xchg() for now:
+** o need to test sizeof(*ptr) to avoid clearing adjacent bytes
+** o and while we are at it, could __LP64__ code use LDCD too?
+**
+**	if (__builtin_constant_p(x) && (x == NULL))
+**		if (((unsigned long)p & 0xf) == 0)
+**			return __ldcw(p);
+*/
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+/* __cmpxchg_u32/u64 defined in arch/parisc/lib/bitops.c */
+extern unsigned long __cmpxchg_u32(volatile unsigned int *m, unsigned int old, unsigned int new_);
+extern unsigned long __cmpxchg_u64(volatile unsigned long *ptr, unsigned long old, unsigned long new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch(size) {
+#ifdef __LP64__
+	case 8: return __cmpxchg_u64((unsigned long *)ptr, old, new_);
+#endif
+	case 4: return __cmpxchg_u32((unsigned int *)ptr, (unsigned int) old, (unsigned int) new_);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+
+
+/* It's possible to reduce all atomic operations to either
+ * __atomic_add_return, atomic_set and atomic_read (the latter
+ * is there only for consistency).
+ */
+
+static __inline__ int __atomic_add_return(int i, atomic_t *v)
+{
+	int ret;
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	ret = (v->counter += i);
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+	return ret;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i) 
+{
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	v->counter = i;
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+}
+
+static __inline__ int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
+
+/* exported interface */
+
+#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)i),(v))))
+#define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
+#define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
+
+#define atomic_add_return(i,v)	(__atomic_add_return( ((int)i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)i),(v)))
+#define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
+#define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v)	(atomic_dec_return(v) == 0)
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#endif
diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h
new file mode 100644
index 000000000000..928e5ef850bd
--- /dev/null
+++ b/include/asm-parisc/bitops.h
@@ -0,0 +1,520 @@
+#ifndef _PARISC_BITOPS_H
+#define _PARISC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+/*
+ * HP-PARISC specific bit operations
+ * for a detailed description of the functions please refer
+ * to include/asm-i386/bitops.h or kerneldoc
+ */
+
+#ifdef __LP64__
+#   define SHIFT_PER_LONG 6
+#ifndef BITS_PER_LONG
+#   define BITS_PER_LONG 64
+#endif
+#else
+#   define SHIFT_PER_LONG 5
+#ifndef BITS_PER_LONG
+#   define BITS_PER_LONG 32
+#endif
+#endif
+
+#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1))
+
+
+#define smp_mb__before_clear_bit()      smp_mb()
+#define smp_mb__after_clear_bit()       smp_mb()
+
+static __inline__ void set_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr |= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ void __set_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	*addr |= mask;
+}
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr &= ~mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	*addr &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr ^= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ void __change_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	*addr ^= mask;
+}
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr |= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return oldbit;
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr |= mask;
+
+	return oldbit;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr &= ~mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return oldbit;
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr &= ~mask;
+
+	return oldbit;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	_atomic_spin_lock_irqsave(addr, flags);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr ^= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return oldbit;
+}
+
+static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address)
+{
+	unsigned long mask;
+	unsigned long *addr = (unsigned long *) address;
+	int oldbit;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	oldbit = (*addr & mask) ? 1 : 0;
+	*addr ^= mask;
+
+	return oldbit;
+}
+
+static __inline__ int test_bit(int nr, const volatile unsigned long *address)
+{
+	unsigned long mask;
+	const unsigned long *addr = (const unsigned long *)address;
+	
+	addr += (nr >> SHIFT_PER_LONG);
+	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	
+	return !!(*addr & mask);
+}
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit in word. returns 0 to "BITS_PER_LONG-1".
+ * @word: The word to search
+ *
+ * __ffs() return is undefined if no bit is set.
+ *
+ * 32-bit fast __ffs by LaMont Jones "lamont At hp com".
+ * 64-bit enhancement by Grant Grundler "grundler At parisc-linux org".
+ * (with help from willy/jejb to get the semantics right)
+ *
+ * This algorithm avoids branches by making use of nullification.
+ * One side effect of "extr" instructions is it sets PSW[N] bit.
+ * How PSW[N] (nullify next insn) gets set is determined by the 
+ * "condition" field (eg "<>" or "TR" below) in the extr* insn.
+ * Only the 1st and one of either the 2cd or 3rd insn will get executed.
+ * Each set of 3 insn will get executed in 2 cycles on PA8x00 vs 16 or so
+ * cycles for each mispredicted branch.
+ */
+
+static __inline__ unsigned long __ffs(unsigned long x)
+{
+	unsigned long ret;
+
+	__asm__(
+#if BITS_PER_LONG > 32
+		" ldi       63,%1\n"
+		" extrd,u,*<>  %0,63,32,%%r0\n"
+		" extrd,u,*TR  %0,31,32,%0\n"	/* move top 32-bits down */
+		" addi    -32,%1,%1\n"
+#else
+		" ldi       31,%1\n"
+#endif
+		" extru,<>  %0,31,16,%%r0\n"
+		" extru,TR  %0,15,16,%0\n"	/* xxxx0000 -> 0000xxxx */
+		" addi    -16,%1,%1\n"
+		" extru,<>  %0,31,8,%%r0\n"
+		" extru,TR  %0,23,8,%0\n"	/* 0000xx00 -> 000000xx */
+		" addi    -8,%1,%1\n"
+		" extru,<>  %0,31,4,%%r0\n"
+		" extru,TR  %0,27,4,%0\n"	/* 000000x0 -> 0000000x */
+		" addi    -4,%1,%1\n"
+		" extru,<>  %0,31,2,%%r0\n"
+		" extru,TR  %0,29,2,%0\n"	/* 0000000y, 1100b -> 0011b */
+		" addi    -2,%1,%1\n"
+		" extru,=  %0,31,1,%%r0\n"	/* check last bit */
+		" addi    -1,%1,%1\n"
+			: "+r" (x), "=r" (ret) );
+	return ret;
+}
+
+/* Undefined if no bit is zero. */
+#define ffz(x)	__ffs(~x)
+
+/*
+ * ffs: find first bit set. returns 1 to BITS_PER_LONG or 0 (if none set)
+ * This is defined the same way as the libc and compiler builtin
+ * ffs routines, therefore differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	return x ? (__ffs((unsigned long)x) + 1) : 0;
+}
+
+/*
+ * fls: find last (most significant) bit set.
+ * fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+
+static __inline__ int fls(int x)
+{
+	int ret;
+	if (!x)
+		return 0;
+
+	__asm__(
+	"	ldi		1,%1\n"
+	"	extru,<>	%0,15,16,%%r0\n"
+	"	zdep,TR		%0,15,16,%0\n"		/* xxxx0000 */
+	"	addi		16,%1,%1\n"
+	"	extru,<>	%0,7,8,%%r0\n"
+	"	zdep,TR		%0,23,24,%0\n"		/* xx000000 */
+	"	addi		8,%1,%1\n"
+	"	extru,<>	%0,3,4,%%r0\n"
+	"	zdep,TR		%0,27,28,%0\n"		/* x0000000 */
+	"	addi		4,%1,%1\n"
+	"	extru,<>	%0,1,2,%%r0\n"
+	"	zdep,TR		%0,29,30,%0\n"		/* y0000000 (y&3 = 0) */
+	"	addi		2,%1,%1\n"
+	"	extru,=		%0,0,1,%%r0\n"
+	"	addi		1,%1,%1\n"		/* if y & 8, add 1 */
+		: "+r" (x), "=r" (ret) );
+
+	return ret;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight64(x)						\
+({								\
+	unsigned long __x = (x);				\
+	unsigned int __w;					\
+	__w = generic_hweight32((unsigned int) __x);		\
+	__w += generic_hweight32((unsigned int) (__x>>32));	\
+	__w;							\
+})
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+#ifndef __LP64__
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+#else
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(((unsigned int)b[1])))
+		return __ffs(b[1]) + 64;
+	if (b[1] >> 32)
+		return __ffs(b[1] >> 32) + 96;
+	return __ffs(b[2]) + 128;
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long find_next_zero_bit(const void * addr, unsigned long size, unsigned long offset)
+{
+	const unsigned long * p = ((unsigned long *) addr) + (offset >> SHIFT_PER_LONG);
+	unsigned long result = offset & ~(BITS_PER_LONG-1);
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= (BITS_PER_LONG-1);
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (BITS_PER_LONG-offset);
+		if (size < BITS_PER_LONG)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
+	}
+	while (size & ~(BITS_PER_LONG -1)) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+found_first:
+	tmp |= ~0UL << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr + (offset >> 6);
+	unsigned long result = offset & ~(BITS_PER_LONG-1);
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= (BITS_PER_LONG-1);
+	if (offset) {
+		tmp = *(p++);
+		tmp &= (~0UL << offset);
+		if (size < BITS_PER_LONG)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
+	}
+	while (size & ~(BITS_PER_LONG-1)) {
+		if ((tmp = *(p++)))
+			goto found_middle;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= (~0UL >> (BITS_PER_LONG - size));
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+        find_next_bit((addr), (size), 0)
+
+#define _EXT2_HAVE_ASM_BITOPS_
+
+#ifdef __KERNEL__
+/*
+ * test_and_{set,clear}_bit guarantee atomicity without
+ * disabling interrupts.
+ */
+#ifdef __LP64__
+#define ext2_set_bit(nr, addr)		__test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
+#define ext2_set_bit_atomic(l,nr,addr)  test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)	__test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
+#else
+#define ext2_set_bit(nr, addr)		__test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
+#define ext2_set_bit_atomic(l,nr,addr)  test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)	__test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
+#endif
+
+#endif	/* __KERNEL__ */
+
+static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
+{
+	__const__ unsigned char	*ADDR = (__const__ unsigned char *) addr;
+
+	return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * This implementation of ext2_find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
+ */
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = cpu_to_le32p(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (tmp != ~0U)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = cpu_to_le32p(p++)) != ~0U)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = cpu_to_le32p(p);
+found_first:
+	tmp |= ~0U << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
+#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size)
+
+#endif /* _PARISC_BITOPS_H */
diff --git a/include/asm-parisc/bug.h b/include/asm-parisc/bug.h
new file mode 100644
index 000000000000..e72f6e2b4b9f
--- /dev/null
+++ b/include/asm-parisc/bug.h
@@ -0,0 +1,12 @@
+#ifndef _PARISC_BUG_H
+#define _PARISC_BUG_H
+
+#define HAVE_ARCH_BUG
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	dump_stack(); \
+	panic("BUG!"); \
+} while (0)
+
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-parisc/bugs.h b/include/asm-parisc/bugs.h
new file mode 100644
index 000000000000..9e6284342a5f
--- /dev/null
+++ b/include/asm-parisc/bugs.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-parisc/bugs.h
+ *
+ *  Copyright (C) 1999	Mike Shaver
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+#include <asm/processor.h>
+
+static inline void check_bugs(void)
+{
+//	identify_cpu(&boot_cpu_data);
+}
diff --git a/include/asm-parisc/byteorder.h b/include/asm-parisc/byteorder.h
new file mode 100644
index 000000000000..db148313de5d
--- /dev/null
+++ b/include/asm-parisc/byteorder.h
@@ -0,0 +1,82 @@
+#ifndef _PARISC_BYTEORDER_H
+#define _PARISC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__("dep %0, 15, 8, %0\n\t"		/* deposit 00ab -> 0bab */
+		"shd %%r0, %0, 8, %0"		/* shift 000000ab -> 00ba */
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab24(__u32 x)
+{
+	__asm__("shd %0, %0, 8, %0\n\t"		/* shift xabcxabc -> cxab */
+		"dep %0, 15, 8, %0\n\t"		/* deposit cxab -> cbab */
+		"shd %%r0, %0, 8, %0"		/* shift 0000cbab -> 0cba */
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	unsigned int temp;
+	__asm__("shd %0, %0, 16, %1\n\t"	/* shift abcdabcd -> cdab */
+		"dep %1, 15, 8, %1\n\t"		/* deposit cdab -> cbab */
+		"shd %0, %1, 8, %0"		/* shift abcdcbab -> dcba */
+		: "=r" (x), "=&r" (temp)
+		: "0" (x));
+	return x;
+}
+
+
+#if BITS_PER_LONG > 32
+/*
+** From "PA-RISC 2.0 Architecture", HP Professional Books.
+** See Appendix I page 8 , "Endian Byte Swapping".
+**
+** Pretty cool algorithm: (* == zero'd bits)
+**      PERMH   01234567 -> 67452301 into %0
+**      HSHL    67452301 -> 7*5*3*1* into %1
+**      HSHR    67452301 -> *6*4*2*0 into %0
+**      OR      %0 | %1  -> 76543210 into %0 (all done!)
+*/
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) {
+	__u64 temp;
+	__asm__("permh,3210 %0, %0\n\t"
+		"hshl %0, 8, %1\n\t"
+		"hshr,u %0, 8, %0\n\t"
+		"or %1, %0, %0"
+		: "=r" (x), "=&r" (temp)
+		: "0" (x));
+	return x;
+}
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __BYTEORDER_HAS_U64__
+#elif !defined(__STRICT_ANSI__)
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	__u32 t1 = ___arch__swab32((__u32) x);
+	__u32 t2 = ___arch__swab32((__u32) (x >> 32));
+	return (((__u64) t1 << 32) | t2);
+}
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __BYTEORDER_HAS_U64__
+#endif
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab24(x) ___arch__swab24(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PARISC_BYTEORDER_H */
diff --git a/include/asm-parisc/cache.h b/include/asm-parisc/cache.h
new file mode 100644
index 000000000000..5da72e38bdde
--- /dev/null
+++ b/include/asm-parisc/cache.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-parisc/cache.h
+ */
+
+#ifndef __ARCH_PARISC_CACHE_H
+#define __ARCH_PARISC_CACHE_H
+
+#include <linux/config.h>
+
+/*
+ * PA 2.0 processors have 64-byte cachelines; PA 1.1 processors have
+ * 32-byte cachelines.  The default configuration is not for SMP anyway,
+ * so if you're building for SMP, you should select the appropriate
+ * processor type.  There is a potential livelock danger when running
+ * a machine with this value set too small, but it's more probable you'll
+ * just ruin performance.
+ */
+#ifdef CONFIG_PA20
+#define L1_CACHE_BYTES 64
+#define L1_CACHE_SHIFT 6
+#else
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_SHIFT 5
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX 5	/* largest L1 which this arch supports */
+
+extern void flush_data_cache_local(void);  /* flushes local data-cache only */
+extern void flush_instruction_cache_local(void); /* flushes local code-cache only */
+#ifdef CONFIG_SMP
+extern void flush_data_cache(void); /* flushes data-cache only (all processors) */
+extern void flush_instruction_cache(void); /* flushes i-cache only (all processors) */
+#else
+#define flush_data_cache flush_data_cache_local
+#define flush_instruction_cache flush_instruction_cache_local
+#endif
+
+extern void parisc_cache_init(void);	/* initializes cache-flushing */
+extern void flush_all_caches(void);     /* flush everything (tlb & cache) */
+extern int get_cache_info(char *);
+extern void flush_user_icache_range_asm(unsigned long, unsigned long);
+extern void flush_kernel_icache_range_asm(unsigned long, unsigned long);
+extern void flush_user_dcache_range_asm(unsigned long, unsigned long);
+extern void flush_kernel_dcache_range_asm(unsigned long, unsigned long);
+extern void flush_kernel_dcache_page(void *);
+extern void flush_kernel_icache_page(void *);
+extern void disable_sr_hashing(void);   /* turns off space register hashing */
+extern void disable_sr_hashing_asm(int); /* low level support for above */
+extern void free_sid(unsigned long);
+unsigned long alloc_sid(void);
+extern void flush_user_dcache_page(unsigned long);
+extern void flush_user_icache_page(unsigned long);
+
+struct seq_file;
+extern void show_cache_info(struct seq_file *m);
+
+extern int split_tlb;
+extern int dcache_stride;
+extern int icache_stride;
+extern struct pdc_cache_info cache_info;
+
+#define pdtlb(addr)         asm volatile("pdtlb 0(%%sr1,%0)" : : "r" (addr));
+#define pitlb(addr)         asm volatile("pitlb 0(%%sr1,%0)" : : "r" (addr));
+#define pdtlb_kernel(addr)  asm volatile("pdtlb 0(%0)" : : "r" (addr));
+
+#endif /* ! __ASSEMBLY__ */
+
+/* Classes of processor wrt: disabling space register hashing */
+
+#define SRHASH_PCXST    0   /* pcxs, pcxt, pcxt_ */
+#define SRHASH_PCXL     1   /* pcxl */
+#define SRHASH_PA20     2   /* pcxu, pcxu_, pcxw, pcxw_ */
+
+#endif
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
new file mode 100644
index 000000000000..06732719d927
--- /dev/null
+++ b/include/asm-parisc/cacheflush.h
@@ -0,0 +1,182 @@
+#ifndef _PARISC_CACHEFLUSH_H
+#define _PARISC_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+/* The usual comment is "Caches aren't brain-dead on the <architecture>".
+ * Unfortunately, that doesn't apply to PA-RISC. */
+
+/* Cache flush operations */
+
+#ifdef CONFIG_SMP
+#define flush_cache_mm(mm) flush_cache_all()
+#else
+#define flush_cache_mm(mm) flush_cache_all_local()
+#endif
+
+#define flush_kernel_dcache_range(start,size) \
+	flush_kernel_dcache_range_asm((start), (start)+(size));
+
+extern void flush_cache_all_local(void);
+
+static inline void cacheflush_h_tmp_function(void *dummy)
+{
+	flush_cache_all_local();
+}
+
+static inline void flush_cache_all(void)
+{
+	on_each_cpu(cacheflush_h_tmp_function, NULL, 1, 1);
+}
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+extern int parisc_cache_flush_threshold;
+void parisc_setup_cache_timing(void);
+
+static inline void
+flush_user_dcache_range(unsigned long start, unsigned long end)
+{
+	if ((end - start) < parisc_cache_flush_threshold)
+		flush_user_dcache_range_asm(start,end);
+	else
+		flush_data_cache();
+}
+
+static inline void
+flush_user_icache_range(unsigned long start, unsigned long end)
+{
+	if ((end - start) < parisc_cache_flush_threshold)
+		flush_user_icache_range_asm(start,end);
+	else
+		flush_instruction_cache();
+}
+
+extern void flush_dcache_page(struct page *page);
+
+#define flush_dcache_mmap_lock(mapping) \
+	write_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	write_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_page(vma,page)	do { flush_kernel_dcache_page(page_address(page)); flush_kernel_icache_page(page_address(page)); } while (0)
+
+#define flush_icache_range(s,e)		do { flush_kernel_dcache_range_asm(s,e); flush_kernel_icache_range_asm(s,e); } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+	flush_cache_page(vma, vaddr, page_to_pfn(page)); \
+	memcpy(dst, src, len); \
+	flush_kernel_dcache_range_asm((unsigned long)dst, (unsigned long)dst + len); \
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+	flush_cache_page(vma, vaddr, page_to_pfn(page)); \
+	memcpy(dst, src, len); \
+} while (0)
+
+static inline void flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+{
+	int sr3;
+
+	if (!vma->vm_mm->context) {
+		BUG();
+		return;
+	}
+
+	sr3 = mfsp(3);
+	if (vma->vm_mm->context == sr3) {
+		flush_user_dcache_range(start,end);
+		flush_user_icache_range(start,end);
+	} else {
+		flush_cache_all();
+	}
+}
+
+/* Simple function to work out if we have an existing address translation
+ * for a user space vma. */
+static inline pte_t *__translation_exists(struct mm_struct *mm,
+					  unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset(mm, addr);
+	pmd_t *pmd;
+	pte_t *pte;
+
+	if(pgd_none(*pgd))
+		return NULL;
+
+	pmd = pmd_offset(pgd, addr);
+	if(pmd_none(*pmd) || pmd_bad(*pmd))
+		return NULL;
+
+	pte = pte_offset_map(pmd, addr);
+
+	/* The PA flush mappings show up as pte_none, but they're
+	 * valid none the less */
+	if(pte_none(*pte) && ((pte_val(*pte) & _PAGE_FLUSH) == 0))
+		return NULL;
+	return pte;
+}
+#define	translation_exists(vma, addr)	__translation_exists((vma)->vm_mm, addr)
+
+
+/* Private function to flush a page from the cache of a non-current
+ * process.  cr25 contains the Page Directory of the current user
+ * process; we're going to hijack both it and the user space %sr3 to
+ * temporarily make the non-current process current.  We have to do
+ * this because cache flushing may cause a non-access tlb miss which
+ * the handlers have to fill in from the pgd of the non-current
+ * process. */
+static inline void
+flush_user_cache_page_non_current(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	/* save the current process space and pgd */
+	unsigned long space = mfsp(3), pgd = mfctl(25);
+
+	/* we don't mind taking interrups since they may not
+	 * do anything with user space, but we can't
+	 * be preempted here */
+	preempt_disable();
+
+	/* make us current */
+	mtctl(__pa(vma->vm_mm->pgd), 25);
+	mtsp(vma->vm_mm->context, 3);
+
+	flush_user_dcache_page(vmaddr);
+	if(vma->vm_flags & VM_EXEC)
+		flush_user_icache_page(vmaddr);
+
+	/* put the old current process back */
+	mtsp(space, 3);
+	mtctl(pgd, 25);
+	preempt_enable();
+}
+
+static inline void
+__flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	if (likely(vma->vm_mm->context == mfsp(3))) {
+		flush_user_dcache_page(vmaddr);
+		if (vma->vm_flags & VM_EXEC)
+			flush_user_icache_page(vmaddr);
+	} else {
+		flush_user_cache_page_non_current(vma, vmaddr);
+	}
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
+{
+	BUG_ON(!vma->vm_mm->context);
+
+	if(likely(translation_exists(vma, vmaddr)))
+		__flush_cache_page(vma, vmaddr);
+
+}
+#endif
+
diff --git a/include/asm-parisc/checksum.h b/include/asm-parisc/checksum.h
new file mode 100644
index 000000000000..229cb56fdb7a
--- /dev/null
+++ b/include/asm-parisc/checksum.h
@@ -0,0 +1,213 @@
+#ifndef _PARISC_CHECKSUM_H
+#define _PARISC_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char *, int, unsigned int);
+
+/*
+ * The same as csum_partial, but copies from src while it checksums.
+ *
+ * Here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned int csum_partial_copy_nocheck(const unsigned char *, unsigned char *,
+					      int, unsigned int);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+extern unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+		unsigned char *dst, int len, unsigned int sum, int *errp);
+
+/*
+ *	Optimized for IP headers, which always checksum on 4 octet boundaries.
+ *
+ *	Written by Randolph Chung <tausq@debian.org>, and then mucked with by
+ *	LaMont Jones <lamont@debian.org>
+ */
+static inline unsigned short ip_fast_csum(unsigned char * iph,
+					  unsigned int ihl) {
+	unsigned int sum;
+
+
+	__asm__ __volatile__ (
+"	ldws,ma		4(%1), %0\n"
+"	addib,<=	-4, %2, 2f\n"
+"\n"
+"	ldws		4(%1), %%r20\n"
+"	ldws		8(%1), %%r21\n"
+"	add		%0, %%r20, %0\n"
+"	ldws,ma		12(%1), %%r19\n"
+"	addc		%0, %%r21, %0\n"
+"	addc		%0, %%r19, %0\n"
+"1:	ldws,ma		4(%1), %%r19\n"
+"	addib,<		0, %2, 1b\n"
+"	addc		%0, %%r19, %0\n"
+"\n"
+"	extru		%0, 31, 16, %%r20\n"
+"	extru		%0, 15, 16, %%r21\n"
+"	addc		%%r20, %%r21, %0\n"
+"	extru		%0, 15, 16, %%r21\n"
+"	add		%0, %%r21, %0\n"
+"	subi		-1, %0, %0\n"
+"2:\n"
+	: "=r" (sum), "=r" (iph), "=r" (ihl)
+	: "1" (iph), "2" (ihl)
+	: "r19", "r20", "r21" );
+
+	return(sum);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	/* add the swapped two 16-bit halves of sum,
+	   a possible carry from adding the two 16-bit halves,
+	   will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	sum += (sum << 16) + (sum >> 16);
+	return (~sum) >> 16;
+}
+ 
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+					       unsigned long daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       unsigned int sum) 
+{
+	__asm__(
+	"	add  %1, %0, %0\n"
+	"	addc %2, %0, %0\n"
+	"	addc %3, %0, %0\n"
+	"	addc %%r0, %0, %0\n"
+		: "=r" (sum)
+		: "r" (daddr), "r"(saddr), "r"((proto<<16)+len), "0"(sum));
+    return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum) 
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buf, int len) {
+	 return csum_fold (csum_partial(buf, len, 0));
+}
+
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						     struct in6_addr *daddr,
+						     __u16 len,
+						     unsigned short proto,
+						     unsigned int sum) 
+{
+	__asm__ __volatile__ (
+
+#if BITS_PER_LONG > 32
+
+	/*
+	** We can execute two loads and two adds per cycle on PA 8000.
+	** But add insn's get serialized waiting for the carry bit.
+	** Try to keep 4 registers with "live" values ahead of the ALU.
+	*/
+
+"	ldd,ma		8(%1), %%r19\n"	/* get 1st saddr word */
+"	ldd,ma		8(%2), %%r20\n"	/* get 1st daddr word */
+"	add		%8, %3, %3\n"/* add 16-bit proto + len */
+"	add		%%r19, %0, %0\n"
+"	ldd,ma		8(%1), %%r21\n"	/* 2cd saddr */
+"	ldd,ma		8(%2), %%r22\n"	/* 2cd daddr */
+"	add,dc		%%r20, %0, %0\n"
+"	add,dc		%%r21, %0, %0\n"
+"	add,dc		%%r22, %0, %0\n"
+"	add,dc		%3, %0, %0\n"  /* fold in proto+len | carry bit */
+"	extrd,u		%0, 31, 32, %%r19\n"	/* copy upper half down */
+"	depdi		0, 31, 32, %0\n"	/* clear upper half */
+"	add		%%r19, %0, %0\n"	/* fold into 32-bits */
+"	addc		0, %0, %0\n"		/* add carry */
+
+#else
+
+	/*
+	** For PA 1.x, the insn order doesn't matter as much.
+	** Insn stream is serialized on the carry bit here too.
+	** result from the previous operation (eg r0 + x)
+	*/
+
+"	ldw,ma		4(%1), %%r19\n"	/* get 1st saddr word */
+"	ldw,ma		4(%2), %%r20\n"	/* get 1st daddr word */
+"	add		%8, %3, %3\n"	/* add 16-bit proto + len */
+"	add		%%r19, %0, %0\n"
+"	ldw,ma		4(%1), %%r21\n"	/* 2cd saddr */
+"	addc		%%r20, %0, %0\n"
+"	ldw,ma		4(%2), %%r22\n"	/* 2cd daddr */
+"	addc		%%r21, %0, %0\n"
+"	ldw,ma		4(%1), %%r19\n"	/* 3rd saddr */
+"	addc		%%r22, %0, %0\n"
+"	ldw,ma		4(%2), %%r20\n"	/* 3rd daddr */
+"	addc		%%r19, %0, %0\n"
+"	ldw,ma		4(%1), %%r21\n"	/* 4th saddr */
+"	addc		%%r20, %0, %0\n"
+"	ldw,ma		4(%2), %%r22\n"	/* 4th daddr */
+"	addc		%%r21, %0, %0\n"
+"	addc		%%r22, %0, %0\n"
+"	addc		%3, %0, %0\n"	/* fold in proto+len, catch carry */
+
+#endif
+	: "=r" (sum), "=r" (saddr), "=r" (daddr), "=r" (len)
+	: "0" (sum), "1" (saddr), "2" (daddr), "3" (len), "r" (proto)
+	: "r19", "r20", "r21", "r22");
+	return csum_fold(sum);
+}
+
+/* 
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ unsigned int csum_and_copy_to_user (const unsigned char *src,
+						      unsigned char __user *dst,
+						      int len, int sum, 
+						      int *err_ptr)
+{
+	/* code stolen from include/asm-mips64 */
+	sum = csum_partial(src, len, sum);
+	 
+	if (copy_to_user(dst, src, len)) {
+		*err_ptr = -EFAULT;
+		return -1;
+	}
+
+	return sum;
+}
+
+#endif
+
diff --git a/include/asm-parisc/compat.h b/include/asm-parisc/compat.h
new file mode 100644
index 000000000000..ca0eac647a05
--- /dev/null
+++ b/include/asm-parisc/compat.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_PARISC_COMPAT_H
+#define _ASM_PARISC_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ 100
+
+typedef u32	compat_size_t;
+typedef s32	compat_ssize_t;
+typedef s32	compat_time_t;
+typedef s32	compat_clock_t;
+typedef s32	compat_pid_t;
+typedef u32	compat_uid_t;
+typedef u32	compat_gid_t;
+typedef u16	compat_mode_t;
+typedef u32	compat_ino_t;
+typedef u32	compat_dev_t;
+typedef s32	compat_off_t;
+typedef s64	compat_loff_t;
+typedef u16	compat_nlink_t;
+typedef u16	compat_ipc_pid_t;
+typedef s32	compat_daddr_t;
+typedef u32	compat_caddr_t;
+typedef u32	compat_timer_t;
+
+typedef s32	compat_int_t;
+typedef s32	compat_long_t;
+typedef u32	compat_uint_t;
+typedef u32	compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t		tv_sec;
+	s32			tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t		tv_sec;
+	s32			tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t		st_dev;	/* dev_t is 32 bits on parisc */
+	compat_ino_t		st_ino;	/* 32 bits */
+	compat_mode_t		st_mode;	/* 16 bits */
+	compat_nlink_t  	st_nlink;	/* 16 bits */
+	u16			st_reserved1;	/* old st_uid */
+	u16			st_reserved2;	/* old st_gid */
+	compat_dev_t		st_rdev;
+	compat_off_t		st_size;
+	compat_time_t		st_atime;
+	u32			st_atime_nsec;
+	compat_time_t		st_mtime;
+	u32			st_mtime_nsec;
+	compat_time_t		st_ctime;
+	u32			st_ctime_nsec;
+	s32			st_blksize;
+	s32			st_blocks;
+	u32			__unused1;	/* ACL stuff */
+	compat_dev_t		__unused2;	/* network */
+	compat_ino_t		__unused3;	/* network */
+	u32			__unused4;	/* cnodes */
+	u16			__unused5;	/* netsite */
+	short			st_fstype;
+	compat_dev_t		st_realdev;
+	u16			st_basemode;
+	u16			st_spareshort;
+	compat_uid_t		st_uid;
+	compat_gid_t		st_gid;
+	u32			st_spare4[3];
+};
+
+struct compat_flock {
+	short			l_type;
+	short			l_whence;
+	compat_off_t		l_start;
+	compat_off_t		l_len;
+	compat_pid_t		l_pid;
+};
+
+struct compat_flock64 {
+	short			l_type;
+	short			l_whence;
+	compat_loff_t		l_start;
+	compat_loff_t		l_len;
+	compat_pid_t		l_pid;
+};
+
+struct compat_statfs {
+	s32		f_type;
+	s32		f_bsize;
+	s32		f_blocks;
+	s32		f_bfree;
+	s32		f_bavail;
+	s32		f_files;
+	s32		f_ffree;
+	__kernel_fsid_t	f_fsid;
+	s32		f_namelen;
+	s32		f_frsize;
+	s32		f_spare[5];
+};
+
+struct compat_sigcontext {
+	compat_int_t sc_flags;
+	compat_int_t sc_gr[32]; /* PSW in sc_gr[0] */
+	u64 sc_fr[32];
+	compat_int_t sc_iasq[2];
+	compat_int_t sc_iaoq[2];
+	compat_int_t sc_sar; /* cr11 */
+};
+
+#define COMPAT_RLIM_INFINITY 0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static __inline__ void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = &current->thread.regs;
+	return (void __user *)regs->gr[30];
+}
+
+#endif /* _ASM_PARISC_COMPAT_H */
diff --git a/include/asm-parisc/compat_rt_sigframe.h b/include/asm-parisc/compat_rt_sigframe.h
new file mode 100644
index 000000000000..81bec28bdc48
--- /dev/null
+++ b/include/asm-parisc/compat_rt_sigframe.h
@@ -0,0 +1,50 @@
+#include<linux/compat.h>
+#include<linux/compat_siginfo.h>
+#include<asm/compat_ucontext.h>
+
+#ifndef _ASM_PARISC_COMPAT_RT_SIGFRAME_H
+#define _ASM_PARISC_COMPAT_RT_SIGFRAME_H
+
+/* In a deft move of uber-hackery, we decide to carry the top half of all
+ * 64-bit registers in a non-portable, non-ABI, hidden structure.
+ * Userspace can read the hidden structure if it *wants* but is never
+ * guaranteed to be in the same place. Infact the uc_sigmask from the 
+ * ucontext_t structure may push the hidden register file downards
+ */
+struct compat_regfile {
+	/* Upper half of all the 64-bit registers that were truncated
+	   on a copy to a 32-bit userspace */
+	compat_int_t rf_gr[32];
+	compat_int_t rf_iasq[2];
+	compat_int_t rf_iaoq[2];
+	compat_int_t rf_sar;
+};
+
+#define COMPAT_SIGRETURN_TRAMP 4
+#define COMPAT_SIGRESTARTBLOCK_TRAMP 5 
+#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + COMPAT_SIGRESTARTBLOCK_TRAMP)
+
+struct compat_rt_sigframe {
+	/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c 
+	        Secondary to that it must protect the ERESTART_RESTARTBLOCK
+		trampoline we left on the stack (we were bad and didn't 
+		change sp so we could run really fast.) */
+	compat_uint_t tramp[COMPAT_TRAMP_SIZE];
+	compat_siginfo_t info;
+	struct compat_ucontext uc;
+	/* Hidden location of truncated registers, *must* be last. */
+	struct compat_regfile regs; 
+};
+
+/*
+ * The 32-bit ABI wants at least 48 bytes for a function call frame:
+ * 16 bytes for arg0-arg3, and 32 bytes for magic (the only part of
+ * which Linux/parisc uses is sp-20 for the saved return pointer...)
+ * Then, the stack pointer must be rounded to a cache line (64 bytes).
+ */
+#define SIGFRAME32		64
+#define FUNCTIONCALLFRAME32	48
+#define PARISC_RT_SIGFRAME_SIZE32					\
+	(((sizeof(struct compat_rt_sigframe) + FUNCTIONCALLFRAME32) + SIGFRAME32) & -SIGFRAME32)
+
+#endif
diff --git a/include/asm-parisc/compat_signal.h b/include/asm-parisc/compat_signal.h
new file mode 100644
index 000000000000..6ad02c360b21
--- /dev/null
+++ b/include/asm-parisc/compat_signal.h
@@ -0,0 +1,2 @@
+/* Use generic */
+#include <asm-generic/compat_signal.h>
diff --git a/include/asm-parisc/compat_ucontext.h b/include/asm-parisc/compat_ucontext.h
new file mode 100644
index 000000000000..a1228a3d2071
--- /dev/null
+++ b/include/asm-parisc/compat_ucontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_PARISC_COMPAT_UCONTEXT_H
+#define _ASM_PARISC_COMPAT_UCONTEXT_H
+
+#include<linux/compat.h>
+#include<asm/compat_signal.h>
+
+/* 32-bit ucontext as seen from an 64-bit kernel */
+struct compat_ucontext {
+	compat_uint_t uc_flags;
+	compat_uptr_t uc_link;
+	compat_stack_t uc_stack;	/* struct compat_sigaltstack (12 bytes)*/	
+	/* FIXME: Pad out to get uc_mcontext to start at an 8-byte aligned boundary */
+	compat_uint_t pad[1];
+	struct compat_sigcontext uc_mcontext;
+	compat_sigset_t uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_PARISC_COMPAT_UCONTEXT_H */
diff --git a/include/asm-parisc/cputime.h b/include/asm-parisc/cputime.h
new file mode 100644
index 000000000000..dcdf2fbd7e72
--- /dev/null
+++ b/include/asm-parisc/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __PARISC_CPUTIME_H
+#define __PARISC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __PARISC_CPUTIME_H */
diff --git a/include/asm-parisc/current.h b/include/asm-parisc/current.h
new file mode 100644
index 000000000000..0fb9338e3bf2
--- /dev/null
+++ b/include/asm-parisc/current.h
@@ -0,0 +1,15 @@
+#ifndef _PARISC_CURRENT_H
+#define _PARISC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+ 
+#define current get_current()
+
+#endif /* !(_PARISC_CURRENT_H) */
diff --git a/include/asm-parisc/delay.h b/include/asm-parisc/delay.h
new file mode 100644
index 000000000000..7a75e984674b
--- /dev/null
+++ b/include/asm-parisc/delay.h
@@ -0,0 +1,43 @@
+#ifndef _PARISC_DELAY_H
+#define _PARISC_DELAY_H
+
+#include <asm/system.h>    /* for mfctl() */
+#include <asm/processor.h> /* for boot_cpu_data */
+
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines
+ */
+
+static __inline__ void __delay(unsigned long loops) {
+	asm volatile(
+	"	.balignl	64,0x34000034\n"
+	"	addib,UV -1,%0,.\n"
+	"	nop\n"
+		: "=r" (loops) : "0" (loops));
+}
+
+static __inline__ void __cr16_delay(unsigned long clocks) {
+	unsigned long start;
+
+	/*
+	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
+	 * a problem here. However, on 32 bit, we need to make sure
+	 * we don't pass in too big a value. The current default
+	 * value of MAX_UDELAY_MS should help prevent this.
+	 */
+
+	start = mfctl(16);
+	while ((mfctl(16) - start) < clocks)
+	    ;
+}
+
+static __inline__ void __udelay(unsigned long usecs) {
+	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
+}
+
+#define udelay(n) __udelay(n)
+
+#endif /* defined(_PARISC_DELAY_H) */
diff --git a/include/asm-parisc/div64.h b/include/asm-parisc/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-parisc/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h
new file mode 100644
index 000000000000..4db84f969e9e
--- /dev/null
+++ b/include/asm-parisc/dma-mapping.h
@@ -0,0 +1,254 @@
+#ifndef _PARISC_DMA_MAPPING_H
+#define _PARISC_DMA_MAPPING_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+
+/* See Documentation/DMA-mapping.txt */
+struct hppa_dma_ops {
+	int  (*dma_supported)(struct device *dev, u64 mask);
+	void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, int flag);
+	void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, int flag);
+	void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova);
+	dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction);
+	void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction);
+	int  (*map_sg)(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg, int nhwents, enum dma_data_direction direction);
+	void (*dma_sync_single_for_cpu)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
+	void (*dma_sync_single_for_device)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
+	void (*dma_sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
+	void (*dma_sync_sg_for_device)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
+};
+
+/*
+** We could live without the hppa_dma_ops indirection if we didn't want
+** to support 4 different coherent dma models with one binary (they will
+** someday be loadable modules):
+**     I/O MMU        consistent method           dma_sync behavior
+**  =============   ======================       =======================
+**  a) PA-7x00LC    uncachable host memory          flush/purge
+**  b) U2/Uturn      cachable host memory              NOP
+**  c) Ike/Astro     cachable host memory              NOP
+**  d) EPIC/SAGA     memory on EPIC/SAGA         flush/reset DMA channel
+**
+** PA-7[13]00LC processors have a GSC bus interface and no I/O MMU.
+**
+** Systems (eg PCX-T workstations) that don't fall into the above
+** categories will need to modify the needed drivers to perform
+** flush/purge and allocate "regular" cacheable pages for everything.
+*/
+
+#ifdef CONFIG_PA11
+extern struct hppa_dma_ops pcxl_dma_ops;
+extern struct hppa_dma_ops pcx_dma_ops;
+#endif
+
+extern struct hppa_dma_ops *hppa_dma_ops;
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   int flag)
+{
+	return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag);
+}
+
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		      int flag)
+{
+	return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, 
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, 
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	return hppa_dma_ops->map_single(dev, ptr, size, direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	hppa_dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	return hppa_dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	hppa_dma_ops->unmap_sg(dev, sg, nhwentries, direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+	     size_t size, enum dma_data_direction direction)
+{
+	return dma_map_single(dev, (page_address(page) + (offset)), size, direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, 0, size, direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_device)
+		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, 0, size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, offset, size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_device)
+		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, offset, size, direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_sg_for_cpu)
+		hppa_dma_ops->dma_sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_sg_for_device)
+		hppa_dma_ops->dma_sync_sg_for_device(dev, sg, nelems, direction);
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	return hppa_dma_ops->dma_supported(dev, mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	return dcache_stride;
+}
+
+static inline int
+dma_is_consistent(dma_addr_t dma_addr)
+{
+	return (hppa_dma_ops->dma_sync_single_for_cpu == NULL);
+}
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		flush_kernel_dcache_range((unsigned long)vaddr, size);
+}
+
+static inline void *
+parisc_walk_tree(struct device *dev)
+{
+	struct device *otherdev;
+	if(likely(dev->platform_data != NULL))
+		return dev->platform_data;
+	/* OK, just traverse the bus to find it */
+	for(otherdev = dev->parent; otherdev;
+	    otherdev = otherdev->parent) {
+		if(otherdev->platform_data) {
+			dev->platform_data = otherdev->platform_data;
+			break;
+		}
+	}
+	BUG_ON(!dev->platform_data);
+	return dev->platform_data;
+}
+		
+#define GET_IOC(dev) (HBA_DATA(parisc_walk_tree(dev))->iommu);	
+	
+
+#ifdef CONFIG_IOMMU_CCIO
+struct parisc_device;
+struct ioc;
+void * ccio_get_iommu(const struct parisc_device *dev);
+int ccio_request_resource(const struct parisc_device *dev,
+		struct resource *res);
+int ccio_allocate_resource(const struct parisc_device *dev,
+		struct resource *res, unsigned long size,
+		unsigned long min, unsigned long max, unsigned long align);
+#else /* !CONFIG_IOMMU_CCIO */
+#define ccio_get_iommu(dev) NULL
+#define ccio_request_resource(dev, res) request_resource(&iomem_resource, res)
+#define ccio_allocate_resource(dev, res, size, min, max, align) \
+		allocate_resource(&iomem_resource, res, size, min, max, \
+				align, NULL, NULL)
+#endif /* !CONFIG_IOMMU_CCIO */
+
+#ifdef CONFIG_IOMMU_SBA
+struct parisc_device;
+void * sba_get_iommu(struct parisc_device *dev);
+#endif
+
+/* At the moment, we panic on error for IOMMU resource exaustion */
+#define dma_mapping_error(x)	0
+
+#endif
diff --git a/include/asm-parisc/dma.h b/include/asm-parisc/dma.h
new file mode 100644
index 000000000000..31fd10df43a7
--- /dev/null
+++ b/include/asm-parisc/dma.h
@@ -0,0 +1,192 @@
+/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * (c) Copyright 2000, Grant Grundler
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <asm/io.h>		/* need byte IO */
+#include <asm/system.h>	
+
+#define dma_outb	outb
+#define dma_inb		inb
+
+/*
+** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
+** (or rather not merge) DMA's into managable chunks.
+** On parisc, this is more of the software/tuning constraint
+** rather than the HW. I/O MMU allocation alogorithms can be
+** faster with smaller size is (to some degree).
+*/
+#define DMA_CHUNK_SIZE	(BITS_PER_LONG*PAGE_SIZE)
+
+/* The maximum address that we can perform a DMA transfer to on this platform
+** New dynamic DMA interfaces should obsolete this....
+*/
+#define MAX_DMA_ADDRESS (~0UL)
+
+/*
+** We don't have DMA channels... well V-class does but the
+** Dynamic DMA Mapping interface will support them... right? :^)
+** Note: this is not relevant right now for PA-RISC, but we cannot 
+** leave this as undefined because some things (e.g. sound)
+** won't compile :-(
+*/
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+#define DMA1_EXT_MODE_REG	(0x400 | DMA1_MODE_REG)
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+#define DMA2_EXT_MODE_REG	(0x400 | DMA2_MODE_REG)
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+#ifdef CONFIG_SUPERIO
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+#endif
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+#ifdef CONFIG_SUPERIO
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+#endif
+}
+
+/* reserve a DMA channel */
+#define request_dma(dmanr, device_id)	(0)
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+#define free_dma(dmanr)
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-parisc/eisa_bus.h b/include/asm-parisc/eisa_bus.h
new file mode 100644
index 000000000000..201085f83dd5
--- /dev/null
+++ b/include/asm-parisc/eisa_bus.h
@@ -0,0 +1,23 @@
+/*
+ * eisa_bus.h interface between the eisa BA driver and the bus enumerator
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
+ *
+ */
+
+#ifndef ASM_EISA_H
+#define ASM_EISA_H
+
+extern void eisa_make_irq_level(int num);
+extern void eisa_make_irq_edge(int num);
+extern int eisa_enumerator(unsigned long eeprom_addr,
+			   struct resource *io_parent, 
+			   struct resource *mem_parent);
+extern int eisa_eeprom_init(unsigned long addr);
+
+#endif
diff --git a/include/asm-parisc/eisa_eeprom.h b/include/asm-parisc/eisa_eeprom.h
new file mode 100644
index 000000000000..9c9da980402a
--- /dev/null
+++ b/include/asm-parisc/eisa_eeprom.h
@@ -0,0 +1,153 @@
+/*
+ * eisa_eeprom.h - provide support for EISA adapters in PA-RISC machines
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2001, 2002 Daniel Engstrom <5116@telia.com>
+ *
+ */
+
+#ifndef ASM_EISA_EEPROM_H
+#define ASM_EISA_EEPROM_H
+
+extern void __iomem *eisa_eeprom_addr;
+
+#define HPEE_MAX_LENGTH       0x2000	/* maximum eeprom length */
+
+#define HPEE_SLOT_INFO(slot) (20+(48*slot))
+
+struct eeprom_header 
+{
+   
+	u_int32_t num_writes;       /* number of writes */
+ 	u_int8_t  flags;            /* flags, usage? */
+	u_int8_t  ver_maj;
+	u_int8_t  ver_min;
+	u_int8_t  num_slots;        /* number of EISA slots in system */
+	u_int16_t csum;             /* checksum, I don't know how to calulate this */
+	u_int8_t  pad[10];
+} __attribute__ ((packed));
+
+
+struct eeprom_eisa_slot_info
+{
+	u_int32_t eisa_slot_id;
+	u_int32_t config_data_offset;
+	u_int32_t num_writes;
+	u_int16_t csum;
+	u_int16_t num_functions;
+	u_int16_t config_data_length;
+	
+	/* bits 0..3 are the duplicate slot id */ 
+#define HPEE_SLOT_INFO_EMBEDDED  0x10
+#define HPEE_SLOT_INFO_VIRTUAL   0x20
+#define HPEE_SLOT_INFO_NO_READID 0x40
+#define HPEE_SLOT_INFO_DUPLICATE 0x80
+	u_int8_t slot_info;
+	
+#define HPEE_SLOT_FEATURES_ENABLE         0x01
+#define HPEE_SLOT_FEATURES_IOCHK          0x02
+#define HPEE_SLOT_FEATURES_CFG_INCOMPLETE 0x80
+	u_int8_t slot_features;
+	
+	u_int8_t  ver_min;
+	u_int8_t  ver_maj;
+	
+#define HPEE_FUNCTION_INFO_HAVE_TYPE      0x01
+#define HPEE_FUNCTION_INFO_HAVE_MEMORY    0x02
+#define HPEE_FUNCTION_INFO_HAVE_IRQ       0x04
+#define HPEE_FUNCTION_INFO_HAVE_DMA       0x08
+#define HPEE_FUNCTION_INFO_HAVE_PORT      0x10
+#define HPEE_FUNCTION_INFO_HAVE_PORT_INIT 0x20
+/* I think there are two slighty different 
+ * versions of the function_info field 
+ * one int the fixed header and one optional 
+ * in the parsed slot data area */
+#define HPEE_FUNCTION_INFO_HAVE_FUNCTION  0x01
+#define HPEE_FUNCTION_INFO_F_DISABLED     0x80
+#define HPEE_FUNCTION_INFO_CFG_FREE_FORM  0x40
+	u_int8_t  function_info;
+
+#define HPEE_FLAG_BOARD_IS_ISA		  0x01 /* flag and minor version for isa board */
+	u_int8_t  flags;
+	u_int8_t  pad[24];
+} __attribute__ ((packed));
+
+
+#define HPEE_MEMORY_MAX_ENT   9
+/* memory descriptor: byte 0 */
+#define HPEE_MEMORY_WRITABLE  0x01
+#define HPEE_MEMORY_CACHABLE  0x02
+#define HPEE_MEMORY_TYPE_MASK 0x18
+#define HPEE_MEMORY_TYPE_SYS  0x00
+#define HPEE_MEMORY_TYPE_EXP  0x08
+#define HPEE_MEMORY_TYPE_VIR  0x10
+#define HPEE_MEMORY_TYPE_OTH  0x18
+#define HPEE_MEMORY_SHARED    0x20
+#define HPEE_MEMORY_MORE      0x80
+
+/* memory descriptor: byte 1 */
+#define HPEE_MEMORY_WIDTH_MASK 0x03
+#define HPEE_MEMORY_WIDTH_BYTE 0x00
+#define HPEE_MEMORY_WIDTH_WORD 0x01
+#define HPEE_MEMORY_WIDTH_DWORD 0x02
+#define HPEE_MEMORY_DECODE_MASK 0x0c
+#define HPEE_MEMORY_DECODE_20BITS 0x00
+#define HPEE_MEMORY_DECODE_24BITS 0x04
+#define HPEE_MEMORY_DECODE_32BITS 0x08
+/* byte 2 and 3 are a 16bit LE value
+ * containging the memory size in kilobytes */
+/* byte 4,5,6 are a 24bit LE value
+ * containing the memory base address */
+
+
+#define HPEE_IRQ_MAX_ENT      7
+/* Interrupt entry: byte 0 */
+#define HPEE_IRQ_CHANNEL_MASK 0xf
+#define HPEE_IRQ_TRIG_LEVEL   0x20
+#define HPEE_IRQ_MORE         0x80
+/* byte 1 seems to be unused */
+
+#define HPEE_DMA_MAX_ENT     4
+
+/* dma entry: byte 0 */
+#define HPEE_DMA_CHANNEL_MASK 7
+#define HPEE_DMA_SIZE_MASK	0xc
+#define HPEE_DMA_SIZE_BYTE	0x0
+#define HPEE_DMA_SIZE_WORD	0x4
+#define HPEE_DMA_SIZE_DWORD	0x8
+#define HPEE_DMA_SHARED      0x40
+#define HPEE_DMA_MORE        0x80
+
+/* dma entry: byte 1 */
+#define HPEE_DMA_TIMING_MASK 0x30
+#define HPEE_DMA_TIMING_ISA	0x0
+#define HPEE_DMA_TIMING_TYPEA 0x10
+#define HPEE_DMA_TIMING_TYPEB 0x20
+#define HPEE_DMA_TIMING_TYPEC 0x30
+
+#define HPEE_PORT_MAX_ENT 20
+/* port entry byte 0 */
+#define HPEE_PORT_SIZE_MASK 0x1f
+#define HPEE_PORT_SHARED    0x40
+#define HPEE_PORT_MORE      0x80
+/* byte 1 and 2 is a 16bit LE value
+ * conating the start port number */
+
+#define HPEE_PORT_INIT_MAX_LEN     60 /* in bytes here */
+/* port init entry byte 0 */
+#define HPEE_PORT_INIT_WIDTH_MASK  0x3
+#define HPEE_PORT_INIT_WIDTH_BYTE  0x0
+#define HPEE_PORT_INIT_WIDTH_WORD  0x1
+#define HPEE_PORT_INIT_WIDTH_DWORD 0x2
+#define HPEE_PORT_INIT_MASK        0x4
+#define HPEE_PORT_INIT_MORE        0x80
+
+#define HPEE_SELECTION_MAX_ENT 26
+
+#define HPEE_TYPE_MAX_LEN    80
+
+#endif
diff --git a/include/asm-parisc/elf.h b/include/asm-parisc/elf.h
new file mode 100644
index 000000000000..adea65fc43c9
--- /dev/null
+++ b/include/asm-parisc/elf.h
@@ -0,0 +1,347 @@
+#ifndef __ASMPARISC_ELF_H
+#define __ASMPARISC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+#define EM_PARISC 15
+
+/* HPPA specific definitions.  */
+
+/* Legal values for e_flags field of Elf32_Ehdr.  */
+
+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
+					      prediction.  */
+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
+
+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
+
+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
+
+/* Additional section indeces.  */
+
+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
+					      symbols in ANSI C.  */
+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
+
+/* Legal values for sh_type field of Elf32_Shdr.  */
+
+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
+
+/* Legal values for sh_flags field of Elf32_Shdr.  */
+
+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
+
+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
+
+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
+
+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
+#define STT_HP_STUB		(STT_LOOS + 0x2)
+
+/* HPPA relocs.  */
+
+#define R_PARISC_NONE		0	/* No reloc.  */
+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LORESERVE	128
+#define R_PARISC_COPY		128	/* Copy relocation.  */
+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_HIRESERVE	255
+
+#define PA_PLABEL_FDESC		0x02	/* bit set if PLABEL points to
+					 * a function descriptor, not
+					 * an address */
+
+/* The following are PA function descriptors 
+ *
+ * addr:	the absolute address of the function
+ * gp:		either the data pointer (r27) for non-PIC code or the
+ *		the PLT pointer (r19) for PIC code */
+
+/* Format for the Elf32 Function descriptor */
+typedef struct elf32_fdesc {
+	__u32	addr;
+	__u32	gp;
+} Elf32_Fdesc;
+
+/* Format for the Elf64 Function descriptor */
+typedef struct elf64_fdesc {
+	__u64	dummy[2]; /* FIXME: nothing uses these, why waste
+			   * the space */
+	__u64	addr;
+	__u64	gp;
+} Elf64_Fdesc;
+
+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
+
+#define PT_HP_TLS		(PT_LOOS + 0x0)
+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
+#define PT_HP_STACK		(PT_LOOS + 0x14)
+
+#define PT_PARISC_ARCHEXT	0x70000000
+#define PT_PARISC_UNWIND	0x70000001
+
+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
+
+#define PF_PARISC_SBP		0x08000000
+
+#define PF_HP_PAGE_SIZE		0x00100000
+#define PF_HP_FAR_SHARED	0x00200000
+#define PF_HP_NEAR_SHARED	0x00400000
+#define PF_HP_CODE		0x01000000
+#define PF_HP_MODIFY		0x02000000
+#define PF_HP_LAZYSWAP		0x04000000
+#define PF_HP_SBP		0x08000000
+
+/*
+ * The following definitions are those for 32-bit ELF binaries on a 32-bit
+ * kernel and for 64-bit binaries on a 64-bit kernel.  To run 32-bit binaries
+ * on a 64-bit kernel, arch/parisc64/kernel/binfmt_elf32.c defines these
+ * macros appropriately and then #includes binfmt_elf.c, which then includes
+ * this file.
+ */
+#ifndef ELF_CLASS
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ *
+ * Note that this header file is used by default in fs/binfmt_elf.c. So
+ * the following macros are for the default case. However, for the 64
+ * bit kernel we also support 32 bit parisc binaries. To do that
+ * arch/parisc64/kernel/binfmt_elf32.c defines its own set of these
+ * macros, and then it includes fs/binfmt_elf.c to provide an alternate
+ * elf binary handler for 32 bit binaries (on the 64 bit kernel).
+ */
+#ifdef __LP64__
+#define ELF_CLASS       ELFCLASS64
+#else
+#define ELF_CLASS	ELFCLASS32
+#endif
+
+typedef unsigned long elf_greg_t;
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  ("PARISC\0" /*+((boot_cpu_data.x86-3)*5) */)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) \
+	current->personality = PER_LINUX; \
+	current->thread.map_base = DEFAULT_MAP_BASE; \
+	current->thread.task_size = DEFAULT_TASK_SIZE \
+
+#endif
+
+/*
+ * Fill in general registers in a core dump.  This saves pretty
+ * much the same registers as hp-ux, although in a different order.
+ * Registers marked # below are not currently saved in pt_regs, so
+ * we use their current values here.
+ *
+ * 	gr0..gr31
+ * 	sr0..sr7
+ * 	iaoq0..iaoq1
+ * 	iasq0..iasq1
+ * 	cr11 (sar)
+ * 	cr19 (iir)
+ * 	cr20 (isr)
+ * 	cr21 (ior)
+ *  #	cr22 (ipsw)
+ *  #	cr0 (recovery counter)
+ *  #	cr24..cr31 (temporary registers)
+ *  #	cr8,9,12,13 (protection IDs)
+ *  #	cr10 (scr/ccr)
+ *  #	cr15 (ext int enable mask)
+ *
+ */
+
+#define ELF_CORE_COPY_REGS(dst, pt)	\
+	memset(dst, 0, sizeof(dst));	/* don't leak any "random" bits */ \
+	memcpy(dst + 0, pt->gr, 32 * sizeof(elf_greg_t)); \
+	memcpy(dst + 32, pt->sr, 8 * sizeof(elf_greg_t)); \
+	memcpy(dst + 40, pt->iaoq, 2 * sizeof(elf_greg_t)); \
+	memcpy(dst + 42, pt->iasq, 2 * sizeof(elf_greg_t)); \
+	dst[44] = pt->sar;   dst[45] = pt->iir; \
+	dst[46] = pt->isr;   dst[47] = pt->ior; \
+	dst[48] = mfctl(22); dst[49] = mfctl(0); \
+	dst[50] = mfctl(24); dst[51] = mfctl(25); \
+	dst[52] = mfctl(26); dst[53] = mfctl(27); \
+	dst[54] = mfctl(28); dst[55] = mfctl(29); \
+	dst[56] = mfctl(30); dst[57] = mfctl(31); \
+	dst[58] = mfctl( 8); dst[59] = mfctl( 9); \
+	dst[60] = mfctl(12); dst[61] = mfctl(13); \
+	dst[62] = mfctl(10); dst[63] = mfctl(15);
+
+#endif /* ! ELF_CLASS */
+
+#define ELF_NGREG 80	/* We only need 64 at present, but leave space
+			   for expansion. */
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+struct task_struct;
+
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+struct pt_regs;	/* forward declaration... */
+
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PARISC && (x)->e_ident[EI_CLASS] == ELF_CLASS)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_PARISC
+#define ELF_OSABI 	ELFOSABI_LINUX
+
+/* %r23 is set by ld.so to a pointer to a function which might be 
+   registered using atexit.  This provides a mean for the dynamic
+   linker to call DT_FINI functions for shared libraries that have
+   been loaded before the code runs.
+
+   So that we can use the same startup file with static executables,
+   we start programs with a value of 0 to indicate that there is no
+   such function.  */
+#define ELF_PLAT_INIT(_r, load_addr)       _r->gr[23] = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.
+
+   (2 * TASK_SIZE / 3) turns into something undefined when run through a
+   32 bit preprocessor and in some cases results in the kernel trying to map
+   ld.so to the kernel virtual base. Use a sane value instead. /Jes 
+  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE + 0x01000000)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	0
+/* (boot_cpu_data.x86_capability) */
+
+#endif
diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h
new file mode 100644
index 000000000000..a10f109770f1
--- /dev/null
+++ b/include/asm-parisc/errno.h
@@ -0,0 +1,119 @@
+#ifndef _PARISC_ERRNO_H
+#define _PARISC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define	ENOMSG		35	/* No message of desired type */
+#define	EIDRM		36	/* Identifier removed */
+#define	ECHRNG		37	/* Channel number out of range */
+#define	EL2NSYNC	38	/* Level 2 not synchronized */
+#define	EL3HLT		39	/* Level 3 halted */
+#define	EL3RST		40	/* Level 3 reset */
+#define	ELNRNG		41	/* Link number out of range */
+#define	EUNATCH		42	/* Protocol driver not attached */
+#define	ENOCSI		43	/* No CSI structure available */
+#define	EL2HLT		44	/* Level 2 halted */
+#define	EDEADLK		45	/* Resource deadlock would occur */
+#define	EDEADLOCK	EDEADLK
+#define	ENOLCK		46	/* No record locks available */
+#define	EILSEQ		47	/* Illegal byte sequence */
+
+#define	ENONET		50	/* Machine is not on the network */
+#define	ENODATA		51	/* No data available */
+#define	ETIME		52	/* Timer expired */
+#define	ENOSR		53	/* Out of streams resources */
+#define	ENOSTR		54	/* Device not a stream */
+#define	ENOPKG		55	/* Package not installed */
+
+#define	ENOLINK		57	/* Link has been severed */
+#define	EADV		58	/* Advertise error */
+#define	ESRMNT		59	/* Srmount error */
+#define	ECOMM		60	/* Communication error on send */
+#define	EPROTO		61	/* Protocol error */
+
+#define	EMULTIHOP	64	/* Multihop attempted */
+
+#define	EDOTDOT		66	/* RFS specific error */
+#define	EBADMSG		67	/* Not a data message */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	EOVERFLOW	72	/* Value too large for defined data type */
+
+/* these errnos are defined by Linux but not HPUX. */
+
+#define	EBADE		160	/* Invalid exchange */
+#define	EBADR		161	/* Invalid request descriptor */
+#define	EXFULL		162	/* Exchange full */
+#define	ENOANO		163	/* No anode */
+#define	EBADRQC		164	/* Invalid request code */
+#define	EBADSLT		165	/* Invalid slot */
+#define	EBFONT		166	/* Bad font file format */
+#define	ENOTUNIQ	167	/* Name not unique on network */
+#define	EBADFD		168	/* File descriptor in bad state */
+#define	EREMCHG		169	/* Remote address changed */
+#define	ELIBACC		170	/* Can not access a needed shared library */
+#define	ELIBBAD		171	/* Accessing a corrupted shared library */
+#define	ELIBSCN		172	/* .lib section in a.out corrupted */
+#define	ELIBMAX		173	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	174	/* Cannot exec a shared library directly */
+#define	ERESTART	175	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	176	/* Streams pipe error */
+#define	EUCLEAN		177	/* Structure needs cleaning */
+#define	ENOTNAM		178	/* Not a XENIX named type file */
+#define	ENAVAIL		179	/* No XENIX semaphores available */
+#define	EISNAM		180	/* Is a named type file */
+#define	EREMOTEIO	181	/* Remote I/O error */
+#define	ENOMEDIUM	182	/* No medium found */
+#define	EMEDIUMTYPE	183	/* Wrong medium type */
+#define	ENOKEY		184	/* Required key not available */
+#define	EKEYEXPIRED	185	/* Key has expired */
+#define	EKEYREVOKED	186	/* Key has been revoked */
+#define	EKEYREJECTED	187	/* Key was rejected by service */
+
+/* We now return you to your regularly scheduled HPUX. */
+
+#define ENOSYM		215	/* symbol does not exist in executable */
+#define	ENOTSOCK	216	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	217	/* Destination address required */
+#define	EMSGSIZE	218	/* Message too long */
+#define	EPROTOTYPE	219	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	220	/* Protocol not available */
+#define	EPROTONOSUPPORT	221	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	222	/* Socket type not supported */
+#define	EOPNOTSUPP	223	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	224	/* Protocol family not supported */
+#define	EAFNOSUPPORT	225	/* Address family not supported by protocol */
+#define	EADDRINUSE	226	/* Address already in use */
+#define	EADDRNOTAVAIL	227	/* Cannot assign requested address */
+#define	ENETDOWN	228	/* Network is down */
+#define	ENETUNREACH	229	/* Network is unreachable */
+#define	ENETRESET	230	/* Network dropped connection because of reset */
+#define	ECONNABORTED	231	/* Software caused connection abort */
+#define	ECONNRESET	232	/* Connection reset by peer */
+#define	ENOBUFS		233	/* No buffer space available */
+#define	EISCONN		234	/* Transport endpoint is already connected */
+#define	ENOTCONN	235	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	236	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	237	/* Too many references: cannot splice */
+#define EREFUSED	ECONNREFUSED	/* for HP's NFS apparently */
+#define	ETIMEDOUT	238	/* Connection timed out */
+#define	ECONNREFUSED	239	/* Connection refused */
+#define EREMOTERELEASE	240	/* Remote peer released connection */
+#define	EHOSTDOWN	241	/* Host is down */
+#define	EHOSTUNREACH	242	/* No route to host */
+
+#define	EALREADY	244	/* Operation already in progress */
+#define	EINPROGRESS	245	/* Operation now in progress */
+#define	EWOULDBLOCK	246	/* Operation would block (Linux returns EAGAIN) */
+#define	ENOTEMPTY	247	/* Directory not empty */
+#define	ENAMETOOLONG	248	/* File name too long */
+#define	ELOOP		249	/* Too many symbolic links encountered */
+#define	ENOSYS		251	/* Function not implemented */
+
+#define ENOTSUP		252	/* Function not implemented (POSIX.4 / HPUX) */
+#define ECANCELLED	253	/* aio request was canceled before complete (POSIX.4 / HPUX) */
+
+
+#endif
diff --git a/include/asm-parisc/fcntl.h b/include/asm-parisc/fcntl.h
new file mode 100644
index 000000000000..def35230716a
--- /dev/null
+++ b/include/asm-parisc/fcntl.h
@@ -0,0 +1,92 @@
+#ifndef _PARISC_FCNTL_H
+#define _PARISC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	00000003
+#define O_RDONLY	00000000
+#define O_WRONLY	00000001
+#define O_RDWR		00000002
+#define O_APPEND	00000010
+#define O_BLKSEEK	00000100 /* HPUX only */
+#define O_CREAT		00000400 /* not fcntl */
+#define O_TRUNC		00001000 /* not fcntl */
+#define O_EXCL		00002000 /* not fcntl */
+#define O_LARGEFILE	00004000
+#define O_SYNC		00100000
+#define O_NONBLOCK	00200004 /* HPUX has separate NDELAY & NONBLOCK */
+#define O_NDELAY	O_NONBLOCK
+#define O_NOCTTY	00400000 /* not fcntl */
+#define O_DSYNC		01000000 /* HPUX only */
+#define O_RSYNC		02000000 /* HPUX only */
+#define O_NOATIME	04000000
+
+#define FASYNC		00020000 /* fcntl, for BSD compatibility */
+#define O_DIRECT	00040000 /* direct disk access hint - currently ignored */
+#define O_DIRECTORY	00010000 /* must be a directory */
+#define O_NOFOLLOW	00000200 /* don't follow links */
+#define O_INVISIBLE	04000000 /* invisible I/O, for DMAPI/XDSM */
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get f_flags */
+#define F_SETFD		2	/* set f_flags */
+#define F_GETFL		3	/* more flags (cloexec) */
+#define F_SETFL		4
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+#define F_GETLK64	8
+#define F_SETLK64	9
+#define F_SETLKW64	10
+
+#define F_GETOWN	11	/*  for sockets. */
+#define F_SETOWN	12	/*  for sockets. */
+#define F_SETSIG	13	/*  for sockets. */
+#define F_GETSIG	14	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		01
+#define F_WRLCK		02
+#define F_UNLCK		03
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short l_type;
+	short l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE  1024
+
+#endif
diff --git a/include/asm-parisc/fixmap.h b/include/asm-parisc/fixmap.h
new file mode 100644
index 000000000000..a5caf4b122b7
--- /dev/null
+++ b/include/asm-parisc/fixmap.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * This file defines the locations of the fixed mappings on parisc.
+ *
+ * All of the values in this file are machine virtual addresses.
+ *
+ * All of the values in this file must be <4GB (because of assembly
+ * loading restrictions).  If you place this region anywhere above
+ * __PAGE_OFFSET, you must adjust the memory map accordingly */
+
+/* The alias region is used in kernel space to do copy/clear to or
+ * from areas congruently mapped with user space.  It is 8MB large
+ * and must be 16MB aligned */
+#define TMPALIAS_MAP_START	((__PAGE_OFFSET) - 16*1024*1024)
+/* This is the kernel area for all maps (vmalloc, dma etc.)  most
+ * usually, it extends up to TMPALIAS_MAP_START.  Virtual addresses
+ * 0..GATEWAY_PAGE_SIZE are reserved for the gateway page */
+#define KERNEL_MAP_START	(GATEWAY_PAGE_SIZE)
+#define KERNEL_MAP_END		(TMPALIAS_MAP_START)
+
+#endif
diff --git a/include/asm-parisc/floppy.h b/include/asm-parisc/floppy.h
new file mode 100644
index 000000000000..47f53df2cef5
--- /dev/null
+++ b/include/asm-parisc/floppy.h
@@ -0,0 +1,277 @@
+/*    Architecture specific parts of the Floppy driver
+ *
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 2000 Matthew Wilcox (willy a debian . org)
+ *    Copyright (C) 2000 Dave Kennedy
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_PARISC_FLOPPY_H
+#define __ASM_PARISC_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)			readb(port)
+#define fd_outb(value, port)		writeb(value, port)
+
+#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count=0;
+static int virtual_dma_residue=0;
+static char *virtual_dma_addr=0;
+static int virtual_dma_mode=0;
+static int doing_pdma=0;
+
+static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if (!doing_pdma) {
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr = virtual_dma_addr;
+
+		for (lcount = virtual_dma_count; lcount; lcount--) {
+			st = fd_inb(virtual_dma_port+4) & 0xa0 ;
+			if (st != 0xa0) 
+				break;
+			if (virtual_dma_mode) {
+				fd_outb(*lptr, virtual_dma_port+5);
+			} else {
+				*lptr = fd_inb(virtual_dma_port+5);
+			}
+			lptr++;
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = fd_inb(virtual_dma_port+4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if (st == 0x20)
+		return;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count = 0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+#ifdef TRACE_FLPY_INT
+	if (!virtual_dma_count)
+		dma_wait++;
+#endif
+}
+
+static void fd_disable_dma(void)
+{
+	if(! (can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if(can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+						   SA_INTERRUPT|SA_SAMPLE_RANDOM,
+						   "floppy", NULL);	
+
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL, get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if((unsigned int) addr >= (unsigned int) high_memory)
+		return vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));		
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if(can_use_virtual_dma == 2) {
+		if((unsigned int) addr >= (unsigned int) high_memory ||
+		   virt_to_bus(addr) >= 0x1000000 ||
+		   _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char * device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc) (unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0; /* Lies.  Floppy controller is memory mapped, not io mapped */
+static int FDC2 = -1;
+
+#define FLOPPY0_TYPE	0
+#define FLOPPY1_TYPE	0
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define AUTO_DMA
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_PARISC_FLOPPY_H */
diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h
new file mode 100644
index 000000000000..d3cfc0168fb1
--- /dev/null
+++ b/include/asm-parisc/grfioctl.h
@@ -0,0 +1,111 @@
+/*  Architecture specific parts of HP's STI (framebuffer) driver.
+ *  Structures are HP-UX compatible for XFree86 usage.
+ * 
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 2001 Helge Deller (deller a parisc-linux org)
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_PARISC_GRFIOCTL_H
+#define __ASM_PARISC_GRFIOCTL_H
+
+/* upper 32 bits of graphics id (HP/UX identifier) */
+
+#define GRFGATOR		8
+#define S9000_ID_S300		9
+#define GRFBOBCAT		9
+#define	GRFCATSEYE		9
+#define S9000_ID_98720		10
+#define GRFRBOX			10
+#define S9000_ID_98550		11
+#define GRFFIREEYE		11
+#define S9000_ID_A1096A		12
+#define GRFHYPERION		12
+#define S9000_ID_FRI		13
+#define S9000_ID_98730		14
+#define GRFDAVINCI		14
+#define S9000_ID_98705		0x26C08070	/* Tigershark */
+#define S9000_ID_98736		0x26D148AB
+#define S9000_ID_A1659A		0x26D1482A	/* CRX 8 plane color (=ELK) */
+#define S9000_ID_ELK		S9000_ID_A1659A
+#define S9000_ID_A1439A		0x26D148EE	/* CRX24 = CRX+ (24-plane color) */
+#define S9000_ID_A1924A		0x26D1488C	/* GRX gray-scale */
+#define S9000_ID_ELM		S9000_ID_A1924A
+#define S9000_ID_98765		0x27480DEF
+#define S9000_ID_ELK_768	0x27482101
+#define S9000_ID_STINGER	0x27A4A402
+#define S9000_ID_TIMBER		0x27F12392	/* Bushmaster (710) Graphics */
+#define S9000_ID_TOMCAT		0x27FCCB6D	/* dual-headed ELK (Dual CRX) */
+#define S9000_ID_ARTIST		0x2B4DED6D	/* Artist (Gecko/712 & 715) onboard Graphics */
+#define S9000_ID_HCRX		0x2BCB015A	/* Hyperdrive/Hyperbowl (A4071A) Graphics */
+#define CRX24_OVERLAY_PLANES	0x920825AA	/* Overlay planes on CRX24 */
+
+#define CRT_ID_ELK_1024		S9000_ID_ELK_768 /* Elk 1024x768  CRX */
+#define CRT_ID_ELK_1280		S9000_ID_A1659A	/* Elk 1280x1024 CRX */
+#define CRT_ID_ELK_1024DB	0x27849CA5      /* Elk 1024x768 double buffer */
+#define CRT_ID_ELK_GS		S9000_ID_A1924A	/* Elk 1280x1024 GreyScale    */
+#define CRT_ID_CRX24		S9000_ID_A1439A	/* Piranha */
+#define CRT_ID_VISUALIZE_EG	0x2D08C0A7      /* Graffiti (built-in B132+/B160L) */
+#define CRT_ID_THUNDER		0x2F23E5FC      /* Thunder 1 VISUALIZE 48*/
+#define CRT_ID_THUNDER2		0x2F8D570E      /* Thunder 2 VISUALIZE 48 XP*/
+#define CRT_ID_HCRX		S9000_ID_HCRX	/* Hyperdrive HCRX */
+#define CRT_ID_CRX48Z		S9000_ID_STINGER /* Stinger */
+#define CRT_ID_DUAL_CRX		S9000_ID_TOMCAT	/* Tomcat */
+#define CRT_ID_PVRX		S9000_ID_98705	/* Tigershark */
+#define CRT_ID_TIMBER		S9000_ID_TIMBER	/* Timber (710 builtin) */
+#define CRT_ID_TVRX		S9000_ID_98765	/* TVRX (gto/falcon) */
+#define CRT_ID_ARTIST		S9000_ID_ARTIST	/* Artist */
+#define CRT_ID_SUMMIT		0x2FC1066B      /* Summit FX2, FX4, FX6 ... */
+
+/* structure for ioctl(GCDESCRIBE) */
+
+#define gaddr_t unsigned long	/* FIXME: PA2.0 (64bit) portable ? */
+
+struct	grf_fbinfo {
+	unsigned int	id;		/* upper 32 bits of graphics id */
+	unsigned int	mapsize;	/* mapped size of framebuffer */
+	unsigned int	dwidth, dlength;/* x and y sizes */
+	unsigned int	width, length;	/* total x and total y size */
+	unsigned int	xlen;		/* x pitch size */
+	unsigned int	bpp, bppu;	/* bits per pixel and used bpp */
+	unsigned int	npl, nplbytes;	/* # of planes and bytes per plane */
+	char		name[32];	/* name of the device (from ROM) */
+	unsigned int	attr;		/* attributes */
+	gaddr_t 	fbbase, regbase;/* framebuffer and register base addr */
+	gaddr_t		regions[6];	/* region bases */
+};
+
+#define	GCID		_IOR('G', 0, int)
+#define	GCON		_IO('G', 1)
+#define	GCOFF		_IO('G', 2)
+#define	GCAON		_IO('G', 3)
+#define	GCAOFF		_IO('G', 4)
+#define	GCMAP		_IOWR('G', 5, int)
+#define	GCUNMAP		_IOWR('G', 6, int)
+#define	GCMAP_HPUX	_IO('G', 5)
+#define	GCUNMAP_HPUX	_IO('G', 6)
+#define	GCLOCK		_IO('G', 7)
+#define	GCUNLOCK	_IO('G', 8)
+#define	GCLOCK_MINIMUM	_IO('G', 9)
+#define	GCUNLOCK_MINIMUM _IO('G', 10)
+#define	GCSTATIC_CMAP	_IO('G', 11)
+#define	GCVARIABLE_CMAP _IO('G', 12)
+#define GCTERM		_IOWR('G',20,int)	/* multi-headed Tomcat */ 
+#define GCDESCRIBE	_IOR('G', 21, struct grf_fbinfo)
+#define GCFASTLOCK	_IO('G', 26)
+
+#endif /* __ASM_PARISC_GRFIOCTL_H */
+
diff --git a/include/asm-parisc/hardirq.h b/include/asm-parisc/hardirq.h
new file mode 100644
index 000000000000..ce93133d5112
--- /dev/null
+++ b/include/asm-parisc/hardirq.h
@@ -0,0 +1,29 @@
+/* hardirq.h: PA-RISC hard IRQ support.
+ *
+ * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
+ *
+ * The locking is really quite interesting.  There's a cpu-local
+ * count of how many interrupts are being handled, and a global
+ * lock.  An interrupt can only be serviced if the global lock
+ * is free.  You can't be sure no more interrupts are being
+ * serviced until you've acquired the lock and then checked
+ * all the per-cpu interrupt counts are all zero.  It's a specialised
+ * br_lock, and that's exactly how Sparc does it.  We don't because
+ * it's more locking for us.  This way is lock-free in the interrupt path.
+ */
+
+#ifndef _PARISC_HARDIRQ_H
+#define _PARISC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned long __softirq_pending; /* set_bit is used on this */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _PARISC_HARDIRQ_H */
diff --git a/include/asm-parisc/hardware.h b/include/asm-parisc/hardware.h
new file mode 100644
index 000000000000..106d3f7cd882
--- /dev/null
+++ b/include/asm-parisc/hardware.h
@@ -0,0 +1,132 @@
+#ifndef _PARISC_HARDWARE_H
+#define _PARISC_HARDWARE_H
+
+#include <asm/pdc.h>
+
+struct parisc_device_id {
+	unsigned char	hw_type;	/* 5 bits used */
+	unsigned char	hversion_rev;	/* 4 bits */
+	unsigned short	hversion;	/* 12 bits */
+	unsigned int	sversion;	/* 20 bits */
+};
+
+#define HWTYPE_ANY_ID	0xff
+#define HVERSION_REV_ANY_ID	0xff
+#define HVERSION_ANY_ID	0xffff
+#define SVERSION_ANY_ID	0xffffffffU
+
+struct hp_hardware {
+	unsigned short	hw_type:5;	/* HPHW_xxx */
+	unsigned short	hversion;
+	unsigned long	sversion:28;
+	unsigned short	opt;
+	const char	name[80];	/* The hardware description */
+};
+
+struct parisc_device;
+
+enum cpu_type {
+	pcx	= 0, /* pa7000		pa 1.0  */
+	pcxs	= 1, /* pa7000		pa 1.1a */
+	pcxt	= 2, /* pa7100		pa 1.1b */
+	pcxt_	= 3, /* pa7200	(t')	pa 1.1c */
+	pcxl	= 4, /* pa7100lc	pa 1.1d */
+	pcxl2	= 5, /* pa7300lc	pa 1.1e */
+	pcxu	= 6, /* pa8000		pa 2.0  */
+	pcxu_	= 7, /* pa8200	(u+)	pa 2.0  */
+	pcxw	= 8, /* pa8500		pa 2.0  */
+	pcxw_	= 9, /* pa8600	(w+)	pa 2.0  */
+	pcxw2	= 10, /* pa8700		pa 2.0  */
+	mako	= 11  /* pa8800		pa 2.0  */
+};
+
+extern char *cpu_name_version[][2]; /* mapping from enum cpu_type to strings */
+
+struct parisc_driver;
+
+struct io_module {
+        volatile uint32_t nothing;		/* reg 0 */
+        volatile uint32_t io_eim;
+        volatile uint32_t io_dc_adata;
+        volatile uint32_t io_ii_cdata;
+        volatile uint32_t io_dma_link;		/* reg 4 */
+        volatile uint32_t io_dma_command;
+        volatile uint32_t io_dma_address;
+        volatile uint32_t io_dma_count;
+        volatile uint32_t io_flex;		/* reg 8 */
+        volatile uint32_t io_spa_address;
+        volatile uint32_t reserved1[2];
+        volatile uint32_t io_command;		/* reg 12 */
+        volatile uint32_t io_status;
+        volatile uint32_t io_control;
+        volatile uint32_t io_data;
+        volatile uint32_t reserved2;		/* reg 16 */
+        volatile uint32_t chain_addr;
+        volatile uint32_t sub_mask_clr;
+        volatile uint32_t reserved3[13];
+        volatile uint32_t undefined[480];
+        volatile uint32_t unpriv[512];
+};
+
+struct bc_module {
+        volatile uint32_t unused1[12];
+        volatile uint32_t io_command;
+        volatile uint32_t io_status;
+        volatile uint32_t io_control;
+        volatile uint32_t unused2[1];
+        volatile uint32_t io_err_resp;
+        volatile uint32_t io_err_info;
+        volatile uint32_t io_err_req;
+        volatile uint32_t unused3[11];
+        volatile uint32_t io_io_low;
+        volatile uint32_t io_io_high;
+};
+
+#define HPHW_NPROC     0 
+#define HPHW_MEMORY    1       
+#define HPHW_B_DMA     2
+#define HPHW_OBSOLETE  3
+#define HPHW_A_DMA     4
+#define HPHW_A_DIRECT  5
+#define HPHW_OTHER     6
+#define HPHW_BCPORT    7
+#define HPHW_CIO       8
+#define HPHW_CONSOLE   9
+#define HPHW_FIO       10
+#define HPHW_BA        11
+#define HPHW_IOA       12
+#define HPHW_BRIDGE    13
+#define HPHW_FABRIC    14
+#define HPHW_MC	       15
+#define HPHW_FAULTY    31
+
+
+/* hardware.c: */
+extern const char *parisc_hardware_description(struct parisc_device_id *id);
+extern enum cpu_type parisc_get_cpu_type(unsigned long hversion);
+
+struct pci_dev;
+
+/* drivers.c: */
+extern struct parisc_device *alloc_pa_dev(unsigned long hpa,
+		struct hardware_path *path);
+extern int register_parisc_device(struct parisc_device *dev);
+extern int register_parisc_driver(struct parisc_driver *driver);
+extern int count_parisc_driver(struct parisc_driver *driver);
+extern int unregister_parisc_driver(struct parisc_driver *driver);
+extern void walk_central_bus(void);
+extern const struct parisc_device *find_pa_parent_type(const struct parisc_device *, int);
+extern void print_parisc_devices(void);
+extern char *print_pa_hwpath(struct parisc_device *dev, char *path);
+extern char *print_pci_hwpath(struct pci_dev *dev, char *path);
+extern void get_pci_node_path(struct pci_dev *dev, struct hardware_path *path);
+extern void init_parisc_bus(void);
+extern struct device *hwpath_to_device(struct hardware_path *modpath);
+extern void device_to_hwpath(struct device *dev, struct hardware_path *path);
+
+
+/* inventory.c: */
+extern void do_memory_inventory(void);
+extern void do_device_inventory(void);
+
+#endif /* _PARISC_HARDWARE_H */
diff --git a/include/asm-parisc/hdreg.h b/include/asm-parisc/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-parisc/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-parisc/hw_irq.h b/include/asm-parisc/hw_irq.h
new file mode 100644
index 000000000000..151426e27521
--- /dev/null
+++ b/include/asm-parisc/hw_irq.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+/*
+ *	linux/include/asm/hw_irq.h
+ *
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+extern void hw_resend_irq(struct hw_interrupt_type *, unsigned int);
+
+#endif
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
new file mode 100644
index 000000000000..3243cf2cd227
--- /dev/null
+++ b/include/asm-parisc/ide.h
@@ -0,0 +1,69 @@
+/*
+ *  linux/include/asm-parisc/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the PARISC architecture specific IDE code.
+ */
+
+#ifndef __ASM_PARISC_IDE_H
+#define __ASM_PARISC_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	2
+#endif
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#define ide_request_irq(irq,hand,flg,dev,id)	request_irq((irq),(hand),(flg),(dev),(id))
+#define ide_free_irq(irq,dev_id)		free_irq((irq), (dev_id))
+#define ide_check_region(from,extent)		check_region((from), (extent))
+#define ide_request_region(from,extent,name)	request_region((from), (extent), (name))
+#define ide_release_region(from,extent)		release_region((from), (extent))
+/* Generic I/O and MEMIO string operations.  */
+
+#define __ide_insw	insw
+#define __ide_insl	insl
+#define __ide_outsw	outsw
+#define __ide_outsl	outsl
+
+static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u16 *)addr = __raw_readw(port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u32 *)addr = __raw_readl(port);
+		addr += 4;
+	}
+}
+
+static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		__raw_writew(*(u16 *)addr, port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_outsl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		__raw_writel(*(u32 *)addr, port);
+		addr += 4;
+	}
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_PARISC_IDE_H */
diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h
new file mode 100644
index 000000000000..b9bb5946ecc9
--- /dev/null
+++ b/include/asm-parisc/io.h
@@ -0,0 +1,418 @@
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/pgtable.h>
+
+extern unsigned long parisc_vmerge_boundary;
+extern unsigned long parisc_vmerge_max_size;
+
+#define BIO_VMERGE_BOUNDARY	parisc_vmerge_boundary
+#define BIO_VMERGE_MAX_SIZE	parisc_vmerge_max_size
+
+#define virt_to_phys(a) ((unsigned long)__pa(a))
+#define phys_to_virt(a) __va(a)
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Memory mapped I/O
+ *
+ * readX()/writeX() do byteswapping and take an ioremapped address
+ * __raw_readX()/__raw_writeX() don't byteswap and take an ioremapped address.
+ * gsc_*() don't byteswap and operate on physical addresses;
+ *   eg dev->hpa or 0xfee00000.
+ */
+
+#ifdef CONFIG_DEBUG_IOREMAP
+#ifdef CONFIG_64BIT
+#define NYBBLE_SHIFT 60
+#else
+#define NYBBLE_SHIFT 28
+#endif
+extern void gsc_bad_addr(unsigned long addr);
+extern void __raw_bad_addr(const volatile void __iomem *addr);
+#define gsc_check_addr(addr)					\
+	if ((addr >> NYBBLE_SHIFT) != 0xf) {			\
+		gsc_bad_addr(addr);				\
+		addr |= 0xfUL << NYBBLE_SHIFT;			\
+	}
+#define __raw_check_addr(addr)					\
+	if (((unsigned long)addr >> NYBBLE_SHIFT) != 0xe)	\
+		__raw_bad_addr(addr);			\
+	addr = (void *)((unsigned long)addr | (0xfUL << NYBBLE_SHIFT));
+#else
+#define gsc_check_addr(addr)
+#define __raw_check_addr(addr)
+#endif
+
+static inline unsigned char gsc_readb(unsigned long addr)
+{
+	long flags;
+	unsigned char ret;
+
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	ldbx	0(%2),%1\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags), "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned short gsc_readw(unsigned long addr)
+{
+	long flags;
+	unsigned short ret;
+
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	ldhx	0(%2),%1\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags), "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned int gsc_readl(unsigned long addr)
+{
+	u32 ret;
+
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	ldwax	0(%1),%0\n"
+	: "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned long long gsc_readq(unsigned long addr)
+{
+	unsigned long long ret;
+	gsc_check_addr(addr);
+
+#ifdef __LP64__
+	__asm__ __volatile__(
+	"	ldda	0(%1),%0\n"
+	:  "=r" (ret) : "r" (addr) );
+#else
+	/* two reads may have side effects.. */
+	ret = ((u64) gsc_readl(addr)) << 32;
+	ret |= gsc_readl(addr+4);
+#endif
+	return ret;
+}
+
+static inline void gsc_writeb(unsigned char val, unsigned long addr)
+{
+	long flags;
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	stbs	%1,0(%2)\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags) :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writew(unsigned short val, unsigned long addr)
+{
+	long flags;
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	sths	%1,0(%2)\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags) :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writel(unsigned int val, unsigned long addr)
+{
+	gsc_check_addr(addr);
+
+	__asm__ __volatile__(
+	"	stwas	%0,0(%1)\n"
+	: :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writeq(unsigned long long val, unsigned long addr)
+{
+	gsc_check_addr(addr);
+
+#ifdef __LP64__
+	__asm__ __volatile__(
+	"	stda	%0,0(%1)\n"
+	: :  "r" (val), "r" (addr) );
+#else
+	/* two writes may have side effects.. */
+	gsc_writel(val >> 32, addr);
+	gsc_writel(val, addr+4);
+#endif
+}
+
+/*
+ * The standard PCI ioremap interfaces
+ */
+
+extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, 0);
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern inline void * ioremap_nocache(unsigned long offset, unsigned long size)
+{
+        return __ioremap(offset, size, _PAGE_NO_CACHE /* _PAGE_PCD */);
+}
+
+extern void iounmap(void __iomem *addr);
+
+/*
+ * USE_HPPA_IOREMAP is the magic flag to enable or disable real ioremap()
+ * functionality.  It's currently disabled because it may not work on some
+ * machines.
+ */
+#define USE_HPPA_IOREMAP 0
+
+#if USE_HPPA_IOREMAP
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return (*(volatile unsigned char __force *) (addr));
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *) addr;
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+static inline unsigned long long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long long __force *) addr;
+}
+
+static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = b;
+}
+static inline void __raw_writew(unsigned short b, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = b;
+}
+static inline void __raw_writel(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = b;
+}
+static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr)
+{
+	*(volatile unsigned long long __force *) addr = b;
+}
+#else /* !USE_HPPA_IOREMAP */
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	return gsc_readb((unsigned long) addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	return gsc_readw((unsigned long) addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	return gsc_readl((unsigned long) addr);
+}
+static inline unsigned long long __raw_readq(const volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	return gsc_readq((unsigned long) addr);
+}
+
+static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	gsc_writeb(b, (unsigned long) addr);
+}
+static inline void __raw_writew(unsigned short b, volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	gsc_writew(b, (unsigned long) addr);
+}
+static inline void __raw_writel(unsigned int b, volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	gsc_writel(b, (unsigned long) addr);
+}
+static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr)
+{
+	__raw_check_addr(addr);
+
+	gsc_writeq(b, (unsigned long) addr);
+}
+#endif /* !USE_HPPA_IOREMAP */
+
+/* readb can never be const, so use __fswab instead of le*_to_cpu */
+#define readb(addr) __raw_readb(addr)
+#define readw(addr) __fswab16(__raw_readw(addr))
+#define readl(addr) __fswab32(__raw_readl(addr))
+#define readq(addr) __fswab64(__raw_readq(addr))
+#define writeb(b, addr) __raw_writeb(b, addr)
+#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
+#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
+#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#define mmiowb() do { } while (0)
+
+void memset_io(volatile void __iomem *addr, unsigned char val, int count);
+void memcpy_fromio(void *dst, const volatile void __iomem *src, int count);
+void memcpy_toio(volatile void __iomem *dst, const void *src, int count);
+
+/* Support old drivers which don't ioremap.
+ * NB this interface is scheduled to disappear in 2.5
+ */
+
+#define __isa_addr(x) (void __iomem *)(F_EXTEND(0xfc000000) | (x))
+#define isa_readb(a) readb(__isa_addr(a))
+#define isa_readw(a) readw(__isa_addr(a))
+#define isa_readl(a) readl(__isa_addr(a))
+#define isa_writeb(b,a) writeb((b), __isa_addr(a))
+#define isa_writew(b,a) writew((b), __isa_addr(a))
+#define isa_writel(b,a) writel((b), __isa_addr(a))
+#define isa_memset_io(a,b,c) memset_io(__isa_addr(a), (b), (c))
+#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a), __isa_addr(b), (c))
+#define isa_memcpy_toio(a,b,c) memcpy_toio(__isa_addr(a), (b), (c))
+
+
+/*
+ * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and 
+ * just copy it. The net code will then do the checksum later. Presently 
+ * only used by some shared memory 8390 Ethernet cards anyway.
+ */
+
+#define eth_io_copy_and_sum(skb,src,len,unused) \
+  memcpy_fromio((skb)->data,(src),(len))
+#define isa_eth_io_copy_and_sum(skb,src,len,unused) \
+  isa_memcpy_fromio((skb)->data,(src),(len))
+
+/* Port-space IO */
+
+#define inb_p inb
+#define inw_p inw
+#define inl_p inl
+#define outb_p outb
+#define outw_p outw
+#define outl_p outl
+
+extern unsigned char eisa_in8(unsigned short port);
+extern unsigned short eisa_in16(unsigned short port);
+extern unsigned int eisa_in32(unsigned short port);
+extern void eisa_out8(unsigned char data, unsigned short port);
+extern void eisa_out16(unsigned short data, unsigned short port);
+extern void eisa_out32(unsigned int data, unsigned short port);
+
+#if defined(CONFIG_PCI)
+extern unsigned char inb(int addr);
+extern unsigned short inw(int addr);
+extern unsigned int inl(int addr);
+
+extern void outb(unsigned char b, int addr);
+extern void outw(unsigned short b, int addr);
+extern void outl(unsigned int b, int addr);
+#elif defined(CONFIG_EISA)
+#define inb eisa_in8
+#define inw eisa_in16
+#define inl eisa_in32
+#define outb eisa_out8
+#define outw eisa_out16
+#define outl eisa_out32
+#else
+static inline char inb(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline short inw(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline int inl(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+#define outb(x, y)	BUG()
+#define outw(x, y)	BUG()
+#define outl(x, y)	BUG()
+#endif
+
+/*
+ * String versions of in/out ops:
+ */
+extern void insb (unsigned long port, void *dst, unsigned long count);
+extern void insw (unsigned long port, void *dst, unsigned long count);
+extern void insl (unsigned long port, void *dst, unsigned long count);
+extern void outsb (unsigned long port, const void *src, unsigned long count);
+extern void outsw (unsigned long port, const void *src, unsigned long count);
+extern void outsl (unsigned long port, const void *src, unsigned long count);
+
+
+/* IO Port space is :      BBiiii   where BB is HBA number. */
+#define IO_SPACE_LIMIT 0x00ffffff
+
+
+#define dma_cache_inv(_start,_size)		do { flush_kernel_dcache_range(_start,_size); } while (0)
+#define dma_cache_wback(_start,_size)		do { flush_kernel_dcache_range(_start,_size); } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { flush_kernel_dcache_range(_start,_size); } while (0)
+
+/* PA machines have an MM I/O space from 0xf0000000-0xffffffff in 32
+ * bit mode and from 0xfffffffff0000000-0xfffffffffffffff in 64 bit
+ * mode (essentially just sign extending.  This macro takes in a 32
+ * bit I/O address (still with the leading f) and outputs the correct
+ * value for either 32 or 64 bit mode */
+#define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL)))
+
+#include <asm-generic/iomap.h>
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
diff --git a/include/asm-parisc/ioctl.h b/include/asm-parisc/ioctl.h
new file mode 100644
index 000000000000..68338d2bda4e
--- /dev/null
+++ b/include/asm-parisc/ioctl.h
@@ -0,0 +1,93 @@
+/*
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org >
+ *    portions from "linux/ioctl.h for Linux" by H.H. Bergman.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#ifndef _ASM_PARISC_IOCTL_H
+#define _ASM_PARISC_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	2U
+#define _IOC_READ	1U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_PARISC_IOCTL_H */
diff --git a/include/asm-parisc/ioctls.h b/include/asm-parisc/ioctls.h
new file mode 100644
index 000000000000..ee84e4172c36
--- /dev/null
+++ b/include/asm-parisc/ioctls.h
@@ -0,0 +1,86 @@
+#ifndef __ARCH_PARISC_IOCTLS_H__
+#define __ARCH_PARISC_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		_IOR('T', 16, struct termios) /* TCGETATTR */
+#define TCSETS		_IOW('T', 17, struct termios) /* TCSETATTR */
+#define TCSETSW		_IOW('T', 18, struct termios) /* TCSETATTRD */
+#define TCSETSF		_IOW('T', 19, struct termios) /* TCSETATTRF */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	_IOR('T', 30, int)
+#define TIOCSPGRP	_IOW('T', 29, int)
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 20, int) /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460	/* Get exact space used by quota */
+
+#define TIOCSTART	0x5461
+#define TIOCSTOP	0x5462
+#define TIOCSLTC	0x5462
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_PARISC_IOCTLS_H */
diff --git a/include/asm-parisc/iosapic.h b/include/asm-parisc/iosapic.h
new file mode 100644
index 000000000000..613390e6805c
--- /dev/null
+++ b/include/asm-parisc/iosapic.h
@@ -0,0 +1,53 @@
+/*
+** This file is private to iosapic driver.
+** If stuff needs to be used by another driver, move it to a common file.
+**
+** WARNING: fields most data structures here are ordered to make sure
+**          they pack nicely for 64-bit compilation. (ie sizeof(long) == 8)
+*/
+
+
+/*
+** I/O SAPIC init function
+** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
+** Call setup as part of per instance initialization.
+** (ie *not* init_module() function unless only one is present.)
+** fixup_irq is to initialize PCI IRQ line support and
+** virtualize pcidev->irq value. To be called by pci_fixup_bus().
+*/
+extern void *iosapic_register(unsigned long hpa);
+extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
+
+
+#ifdef __IA64__
+/*
+** PA: PIB (Processor Interrupt Block) is handled by Runway bus adapter.
+**     and is hardcoded to 0xfeeNNNN0 where NNNN is id_eid field.
+**
+** IA64: PIB is handled by "Local SAPIC" (integrated in the processor).
+*/
+struct local_sapic_info {
+	struct local_sapic_info *lsi_next;      /* point to next CPU info */
+	int                     *lsi_cpu_id;    /* point to logical CPU id */
+	unsigned long           *lsi_id_eid;    /* point to IA-64 CPU id */
+	int                     *lsi_status;    /* point to CPU status   */
+	void                    *lsi_private;   /* point to special info */
+};
+
+/*
+** "root" data structure which ties everything together.
+** Should always be able to start with sapic_root and locate
+** the desired information.
+*/
+struct sapic_info {
+	struct sapic_info	*si_next;	/* info is per cell */
+	int                     si_cellid;      /* cell id */
+	unsigned int            si_status;       /* status  */
+	char                    *si_pib_base;   /* intr blk base address */
+	local_sapic_info_t      *si_local_info;
+	io_sapic_info_t         *si_io_info;
+	extint_info_t           *si_extint_info;/* External Intr info      */
+};
+
+#endif /* IA64 */
+
diff --git a/include/asm-parisc/ipcbuf.h b/include/asm-parisc/ipcbuf.h
new file mode 100644
index 000000000000..bd956c425785
--- /dev/null
+++ b/include/asm-parisc/ipcbuf.h
@@ -0,0 +1,27 @@
+#ifndef __PARISC_IPCBUF_H__
+#define __PARISC_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for PA-RISC is almost identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel.
+ * 'seq' has been changed from long to int so that it's the same size
+ * on 64-bit kernels as on 32-bit ones.
+ */
+
+struct ipc64_perm
+{
+	key_t           key;
+	uid_t           uid;
+	gid_t           gid;
+	uid_t           cuid;
+	gid_t           cgid;
+	unsigned short int	__pad1;
+	mode_t          mode;
+	unsigned short int	__pad2;
+	unsigned short int	seq;
+	unsigned int	__pad3;
+	unsigned long long int __unused1;
+	unsigned long long int __unused2;
+};
+
+#endif /* __PARISC_IPCBUF_H__ */
diff --git a/include/asm-parisc/irq.h b/include/asm-parisc/irq.h
new file mode 100644
index 000000000000..75654ba93353
--- /dev/null
+++ b/include/asm-parisc/irq.h
@@ -0,0 +1,55 @@
+/*
+ * include/asm-parisc/irq.h
+ *
+ * Copyright 2005 Matthew Wilcox <matthew@wil.cx>
+ */
+
+#ifndef _ASM_PARISC_IRQ_H
+#define _ASM_PARISC_IRQ_H
+
+#include <linux/config.h>
+#include <asm/types.h>
+
+#define NO_IRQ		(-1)
+
+#ifdef CONFIG_GSC
+#define GSC_IRQ_BASE	16
+#define GSC_IRQ_MAX	63
+#define CPU_IRQ_BASE	64
+#else
+#define CPU_IRQ_BASE	16
+#endif
+
+#define TIMER_IRQ	(CPU_IRQ_BASE + 0)
+#define	IPI_IRQ		(CPU_IRQ_BASE + 1)
+#define CPU_IRQ_MAX	(CPU_IRQ_BASE + (BITS_PER_LONG - 1))
+
+#define NR_IRQS		(CPU_IRQ_MAX + 1)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return (irq == 2) ? 9 : irq;
+}
+
+struct hw_interrupt_type;
+
+/*
+ * Some useful "we don't have to do anything here" handlers.  Should
+ * probably be provided by the generic code.
+ */
+void no_ack_irq(unsigned int irq);
+void no_end_irq(unsigned int irq);
+
+extern int txn_alloc_irq(unsigned int nbits);
+extern int txn_claim_irq(int);
+extern unsigned int txn_alloc_data(unsigned int);
+extern unsigned long txn_alloc_addr(unsigned int);
+
+extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *);
+
+extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *);
+
+/* soft power switch support (power.c) */
+extern struct tasklet_struct power_tasklet;
+
+#endif	/* _ASM_PARISC_IRQ_H */
diff --git a/include/asm-parisc/kmap_types.h b/include/asm-parisc/kmap_types.h
new file mode 100644
index 000000000000..6886a0c3fedf
--- /dev/null
+++ b/include/asm-parisc/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h
new file mode 100644
index 000000000000..1ac8ab6c580d
--- /dev/null
+++ b/include/asm-parisc/led.h
@@ -0,0 +1,45 @@
+#ifndef LED_H
+#define LED_H
+
+#define	LED7		0x80		/* top (or furthest right) LED */
+#define	LED6		0x40
+#define	LED5		0x20
+#define	LED4		0x10
+#define	LED3		0x08
+#define	LED2		0x04
+#define	LED1		0x02
+#define	LED0		0x01		/* bottom (or furthest left) LED */
+
+#define	LED_LAN_TX	LED0		/* for LAN transmit activity */
+#define	LED_LAN_RCV	LED1		/* for LAN receive activity */
+#define	LED_DISK_IO	LED2		/* for disk activity */
+#define	LED_HEARTBEAT	LED3		/* heartbeat */
+
+/* values for pdc_chassis_lcd_info_ret_block.model: */
+#define DISPLAY_MODEL_LCD  0		/* KittyHawk LED or LCD */
+#define DISPLAY_MODEL_NONE 1		/* no LED or LCD */
+#define DISPLAY_MODEL_LASI 2		/* LASI style 8 bit LED */
+#define DISPLAY_MODEL_OLD_ASP 0x7F	/* faked: ASP style 8 x 1 bit LED (only very old ASP versions) */
+
+#define LED_CMD_REG_NONE 0		/* NULL == no addr for the cmd register */
+
+/* led tasklet struct */
+extern struct tasklet_struct led_tasklet;
+
+/* register_led_driver() */
+int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg);
+
+/* registers the LED regions for procfs */
+void __init register_led_regions(void);
+
+#ifdef CONFIG_CHASSIS_LCD_LED
+/* writes a string to the LCD display (if possible on this h/w) */
+int lcd_print(char *str);
+#else
+#define lcd_print(str)
+#endif
+
+/* main LED initialization function (uses PDC) */ 
+int __init led_init(void);
+
+#endif /* LED_H */
diff --git a/include/asm-parisc/linkage.h b/include/asm-parisc/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-parisc/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-parisc/local.h b/include/asm-parisc/local.h
new file mode 100644
index 000000000000..892b3b2c4962
--- /dev/null
+++ b/include/asm-parisc/local.h
@@ -0,0 +1,40 @@
+#ifndef _ARCH_PARISC_LOCAL_H
+#define _ARCH_PARISC_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef atomic_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC_INIT(i)
+#define local_read(v)	atomic_read(v)
+#define local_set(v,i)	atomic_set(v,i)
+
+#define local_inc(v)	atomic_inc(v)
+#define local_dec(v)	atomic_dec(v)
+#define local_add(i, v)	atomic_add(i, v)
+#define local_sub(i, v)	atomic_sub(i, v)
+
+#define __local_inc(v)		((v)->counter++)
+#define __local_dec(v)		((v)->counter--)
+#define __local_add(i,v)	((v)->counter+=(i))
+#define __local_sub(i,v)	((v)->counter-=(i))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ARCH_PARISC_LOCAL_H */
diff --git a/include/asm-parisc/machdep.h b/include/asm-parisc/machdep.h
new file mode 100644
index 000000000000..a231c97d703e
--- /dev/null
+++ b/include/asm-parisc/machdep.h
@@ -0,0 +1,16 @@
+#ifndef _PARISC_MACHDEP_H
+#define _PARISC_MACHDEP_H
+
+#include <linux/notifier.h>
+
+#define	MACH_RESTART	1
+#define	MACH_HALT	2
+#define MACH_POWER_ON	3
+#define	MACH_POWER_OFF	4
+
+extern struct notifier_block *mach_notifier;
+extern void pa7300lc_init(void);
+
+extern void (*cpu_lpmc)(int, struct pt_regs *);
+
+#endif
diff --git a/include/asm-parisc/mc146818rtc.h b/include/asm-parisc/mc146818rtc.h
new file mode 100644
index 000000000000..adf41631449f
--- /dev/null
+++ b/include/asm-parisc/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-parisc/mman.h b/include/asm-parisc/mman.h
new file mode 100644
index 000000000000..e829607eb8bc
--- /dev/null
+++ b/include/asm-parisc/mman.h
@@ -0,0 +1,57 @@
+#ifndef __PARISC_MMAN_H__
+#define __PARISC_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x03		/* Mask for type of mapping */
+#define MAP_FIXED	0x04		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x10		/* don't use a file */
+
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_GROWSDOWN	0x8000		/* stack-like segment */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+
+#define MS_SYNC		1		/* synchronous memory sync */
+#define MS_ASYNC	2		/* sync memory asynchronously */
+#define MS_INVALIDATE	4		/* invalidate the caches */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL     0               /* no further special treatment */
+#define MADV_RANDOM     1               /* expect random page references */
+#define MADV_SEQUENTIAL 2               /* expect sequential page references */
+#define MADV_WILLNEED   3               /* will need these pages */
+#define MADV_DONTNEED   4               /* don't need these pages */
+#define MADV_SPACEAVAIL 5               /* insure that resources are reserved */
+#define MADV_VPS_PURGE  6               /* Purge pages from VM page cache */
+#define MADV_VPS_INHERIT 7              /* Inherit parents page size */
+
+/* The range 12-64 is reserved for page size specification. */
+#define MADV_4K_PAGES   12              /* Use 4K pages  */
+#define MADV_16K_PAGES  14              /* Use 16K pages */
+#define MADV_64K_PAGES  16              /* Use 64K pages */
+#define MADV_256K_PAGES 18              /* Use 256K pages */
+#define MADV_1M_PAGES   20              /* Use 1 Megabyte pages */
+#define MADV_4M_PAGES   22              /* Use 4 Megabyte pages */
+#define MADV_16M_PAGES  24              /* Use 16 Megabyte pages */
+#define MADV_64M_PAGES  26              /* Use 64 Megabyte pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+#define MAP_VARIABLE	0
+
+#endif /* __PARISC_MMAN_H__ */
diff --git a/include/asm-parisc/mmu.h b/include/asm-parisc/mmu.h
new file mode 100644
index 000000000000..6a310cf8b734
--- /dev/null
+++ b/include/asm-parisc/mmu.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_MMU_H_
+#define _PARISC_MMU_H_
+
+/* On parisc, we store the space id here */
+typedef unsigned long mm_context_t;
+
+#endif /* _PARISC_MMU_H_ */
diff --git a/include/asm-parisc/mmu_context.h b/include/asm-parisc/mmu_context.h
new file mode 100644
index 000000000000..9c05836239a2
--- /dev/null
+++ b/include/asm-parisc/mmu_context.h
@@ -0,0 +1,73 @@
+#ifndef __PARISC_MMU_CONTEXT_H
+#define __PARISC_MMU_CONTEXT_H
+
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* on PA-RISC, we actually have enough contexts to justify an allocator
+ * for them.  prumpf */
+
+extern unsigned long alloc_sid(void);
+extern void free_sid(unsigned long);
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	BUG_ON(atomic_read(&mm->mm_users) != 1);
+
+	mm->context = alloc_sid();
+	return 0;
+}
+
+static inline void
+destroy_context(struct mm_struct *mm)
+{
+	free_sid(mm->context);
+	mm->context = 0;
+}
+
+static inline void load_context(mm_context_t context)
+{
+	mtsp(context, 3);
+#if SPACEID_SHIFT == 0
+	mtctl(context << 1,8);
+#else
+	mtctl(context >> (SPACEID_SHIFT - 1),8);
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+
+	if (prev != next) {
+		mtctl(__pa(next->pgd), 25);
+		load_context(next->context);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	/*
+	 * Activate_mm is our one chance to allocate a space id
+	 * for a new mm created in the exec path. There's also
+	 * some lazy tlb stuff, which is currently dead code, but
+	 * we only allocate a space id if one hasn't been allocated
+	 * already, so we should be OK.
+	 */
+
+	BUG_ON(next == &init_mm); /* Should never happen */
+
+	if (next->context == 0)
+	    next->context = alloc_sid();
+
+	switch_mm(prev,next,current);
+}
+#endif
diff --git a/include/asm-parisc/mmzone.h b/include/asm-parisc/mmzone.h
new file mode 100644
index 000000000000..928bf50c4693
--- /dev/null
+++ b/include/asm-parisc/mmzone.h
@@ -0,0 +1,102 @@
+#ifndef _PARISC_MMZONE_H
+#define _PARISC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define MAX_PHYSMEM_RANGES 8 /* Fix the size for now (current known max is 3) */
+extern int npmem_ranges;
+
+struct node_map_data {
+    pg_data_t pg_data;
+};
+
+extern struct node_map_data node_data[];
+
+#define NODE_DATA(nid)          (&node_data[nid].pg_data)
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define kvaddr_to_nid(kaddr)	pfn_to_nid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+#define node_localnr(pfn, nid)		((pfn) - node_start_pfn(nid))
+
+#define local_mapnr(kvaddr)						\
+({									\
+	unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT;		\
+	(__pfn - node_start_pfn(pfn_to_nid(__pfn)));			\
+})
+
+#define pfn_to_page(pfn)						\
+({									\
+	unsigned long __pfn = (pfn);					\
+	int __node  = pfn_to_nid(__pfn);				\
+	&node_mem_map(__node)[node_localnr(__pfn,__node)];		\
+})
+
+#define page_to_pfn(pg)							\
+({									\
+	struct page *__page = pg;					\
+	struct zone *__zone = page_zone(__page);			\
+	BUG_ON(__zone == NULL);						\
+	(unsigned long)(__page - __zone->zone_mem_map)			\
+		+ __zone->zone_start_pfn;				\
+})
+
+/* We have these possible memory map layouts:
+ * Astro: 0-3.75, 67.75-68, 4-64
+ * zx1: 0-1, 257-260, 4-256
+ * Stretch (N-class): 0-2, 4-32, 34-xxx
+ */
+
+/* Since each 1GB can only belong to one region (node), we can create
+ * an index table for pfn to nid lookup; each entry in pfnnid_map 
+ * represents 1GB, and contains the node that the memory belongs to. */
+
+#define PFNNID_SHIFT (30 - PAGE_SHIFT)
+#define PFNNID_MAP_MAX  512     /* support 512GB */
+extern unsigned char pfnnid_map[PFNNID_MAP_MAX];
+
+#ifndef __LP64__
+#define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT))
+#else
+/* io can be 0xf0f0f0f0f0xxxxxx or 0xfffffffff0000000 */
+#define pfn_is_io(pfn) ((pfn & (0xf000000000000000UL >> PAGE_SHIFT)) == (0xf000000000000000UL >> PAGE_SHIFT))
+#endif
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	unsigned int i;
+	unsigned char r;
+
+	if (unlikely(pfn_is_io(pfn)))
+		return 0;
+
+	i = pfn >> PFNNID_SHIFT;
+	BUG_ON(i >= sizeof(pfnnid_map) / sizeof(pfnnid_map[0]));
+	r = pfnnid_map[i];
+	BUG_ON(r == 0xff);
+
+	return (int)r;
+}
+
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+
+#else /* !CONFIG_DISCONTIGMEM */
+#define MAX_PHYSMEM_RANGES 	1 
+#endif
+#endif /* _PARISC_MMZONE_H */
diff --git a/include/asm-parisc/module.h b/include/asm-parisc/module.h
new file mode 100644
index 000000000000..00f06885f843
--- /dev/null
+++ b/include/asm-parisc/module.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_PARISC_MODULE_H
+#define _ASM_PARISC_MODULE_H
+/*
+ * This file contains the parisc architecture specific module code.
+ */
+#ifdef __LP64__
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Addr Elf64_Addr
+#define Elf_Rela Elf64_Rela
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Addr Elf32_Addr
+#define Elf_Rela Elf32_Rela
+#endif
+
+struct unwind_table;
+
+struct mod_arch_specific
+{
+	unsigned long got_offset, got_count, got_max;
+	unsigned long fdesc_offset, fdesc_count, fdesc_max;
+	unsigned long stub_offset, stub_count, stub_max;
+	unsigned long init_stub_offset, init_stub_count, init_stub_max;
+	int unwind_section;
+	struct unwind_table *unwind;
+};
+
+#endif /* _ASM_PARISC_MODULE_H */
diff --git a/include/asm-parisc/msgbuf.h b/include/asm-parisc/msgbuf.h
new file mode 100644
index 000000000000..14ffc2782f1e
--- /dev/null
+++ b/include/asm-parisc/msgbuf.h
@@ -0,0 +1,37 @@
+#ifndef _PARISC_MSGBUF_H
+#define _PARISC_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for parisc architecture, copied from sparc.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifndef __LP64__
+	unsigned int   __pad1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __LP64__
+	unsigned int   __pad2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __LP64__
+	unsigned int   __pad3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned int  msg_cbytes;	/* current number of bytes on queue */
+	unsigned int  msg_qnum;	/* number of messages in queue */
+	unsigned int  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned int  __unused1;
+	unsigned int  __unused2;
+};
+
+#endif /* _PARISC_MSGBUF_H */
diff --git a/include/asm-parisc/namei.h b/include/asm-parisc/namei.h
new file mode 100644
index 000000000000..8d29b3d9fb33
--- /dev/null
+++ b/include/asm-parisc/namei.h
@@ -0,0 +1,17 @@
+/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
+ * linux/include/asm-parisc/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __PARISC_NAMEI_H
+#define __PARISC_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __PARISC_NAMEI_H */
diff --git a/include/asm-parisc/numnodes.h b/include/asm-parisc/numnodes.h
new file mode 100644
index 000000000000..6c67651efd1c
--- /dev/null
+++ b/include/asm-parisc/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+/* Max 8 Nodes */
+#define NODES_SHIFT	3
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
new file mode 100644
index 000000000000..4a12692f94b4
--- /dev/null
+++ b/include/asm-parisc/page.h
@@ -0,0 +1,162 @@
+#ifndef _PARISC_PAGE_H
+#define _PARISC_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+#include <asm/cache.h>
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)      copy_user_page_asm((void *)(to), (void *)(from))
+
+struct page;
+
+extern void purge_kernel_dcache_page(unsigned long);
+extern void copy_user_page_asm(void *to, void *from);
+extern void clear_user_page_asm(void *page, unsigned long vaddr);
+
+static inline void
+copy_user_page(void *vto, void *vfrom, unsigned long vaddr, struct page *pg)
+{
+	copy_user_page_asm(vto, vfrom);
+	flush_kernel_dcache_page(vto);
+	/* XXX: ppc flushes icache too, should we? */
+}
+
+static inline void
+clear_user_page(void *page, unsigned long vaddr, struct page *pg)
+{
+	purge_kernel_dcache_page((unsigned long)page);
+	clear_user_page_asm(page, vaddr);
+}
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef __LP64__
+typedef struct { unsigned long pte; } pte_t;
+#else
+typedef struct {
+	unsigned long pte;
+	unsigned long flags;
+} pte_t;
+#endif
+/* NOTE: even on 64 bits, these entries are __u32 because we allocate
+ * the pmd and pgd in ZONE_DMA (i.e. under 4GB) */
+typedef struct { __u32 pmd; } pmd_t;
+typedef struct { __u32 pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#ifdef __LP64__
+#define pte_flags(x)	(*(__u32 *)&((x).pte))
+#else
+#define pte_flags(x)	((x).flags)
+#endif
+
+/* These do not work lvalues, so make sure we don't use them as such. */
+#define pmd_val(x)	((x).pmd + 0)
+#define pgd_val(x)	((x).pgd + 0)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pmd_val_set(x,n) (x).pmd = (n)
+#define __pgd_val_set(x,n) (x).pgd = (n)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+typedef struct __physmem_range {
+	unsigned long start_pfn;
+	unsigned long pages;       /* PAGE_SIZE pages */
+} physmem_range_t;
+
+extern physmem_range_t pmem_ranges[];
+extern int npmem_ranges;
+
+#endif /* !__ASSEMBLY__ */
+
+/* WARNING: The definitions below must match exactly to sizeof(pte_t)
+ * etc
+ */
+#ifdef __LP64__
+#define BITS_PER_PTE_ENTRY	3
+#define BITS_PER_PMD_ENTRY	2
+#define BITS_PER_PGD_ENTRY	2
+#else
+#define BITS_PER_PTE_ENTRY	3
+#define BITS_PER_PMD_ENTRY	2
+#define BITS_PER_PGD_ENTRY	BITS_PER_PMD_ENTRY
+#endif
+#define PGD_ENTRY_SIZE	(1UL << BITS_PER_PGD_ENTRY)
+#define PMD_ENTRY_SIZE	(1UL << BITS_PER_PMD_ENTRY)
+#define PTE_ENTRY_SIZE	(1UL << BITS_PER_PTE_ENTRY)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+
+#define LINUX_GATEWAY_SPACE     0
+
+/* This governs the relationship between virtual and physical addresses.
+ * If you alter it, make sure to take care of our various fixed mapping
+ * segments in fixmap.h */
+#define __PAGE_OFFSET           (0x10000000)
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+/* The size of the gateway page (we leave lots of room for expansion) */
+#define GATEWAY_PAGE_SIZE	0x4000
+
+/* The start of the actual kernel binary---used in vmlinux.lds.S
+ * Leave some space after __PAGE_OFFSET for detecting kernel null
+ * ptr derefs */
+#define KERNEL_BINARY_TEXT_START	(__PAGE_OFFSET + 0x100000)
+
+/* These macros don't work for 64-bit C code -- don't allow in C at all */
+#ifdef __ASSEMBLY__
+#   define PA(x)	((x)-__PAGE_OFFSET)
+#   define VA(x)	((x)+__PAGE_OFFSET)
+#endif
+#define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _PARISC_PAGE_H */
diff --git a/include/asm-parisc/param.h b/include/asm-parisc/param.h
new file mode 100644
index 000000000000..f4694d452dd6
--- /dev/null
+++ b/include/asm-parisc/param.h
@@ -0,0 +1,27 @@
+#ifndef _ASMPARISC_PARAM_H
+#define _ASMPARISC_PARAM_H
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+# ifdef CONFIG_PA20
+#  define HZ		1000		/* Faster machines */
+# else
+#  define HZ		100		/* Internal kernel timer frequency */
+# endif
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h
new file mode 100644
index 000000000000..ef69ab4b17a9
--- /dev/null
+++ b/include/asm-parisc/parisc-device.h
@@ -0,0 +1,54 @@
+#include <linux/device.h>
+
+struct parisc_device {
+	unsigned long   hpa;		/* Hard Physical Address */
+	struct parisc_device_id id;
+	struct parisc_driver *driver;	/* Driver for this device */
+	char		name[80];	/* The hardware description */
+	int		irq;
+	int		aux_irq;	/* Some devices have a second IRQ */
+
+	char		hw_path;        /* The module number on this bus */
+	unsigned int	num_addrs;	/* some devices have additional address ranges. */
+	unsigned long	*addr;          /* which will be stored here */
+ 
+#ifdef __LP64__
+	/* parms for pdc_pat_cell_module() call */
+	unsigned long	pcell_loc;	/* Physical Cell location */
+	unsigned long	mod_index;	/* PAT specific - Misc Module info */
+
+	/* generic info returned from pdc_pat_cell_module() */
+	unsigned long	mod_info;	/* PAT specific - Misc Module info */
+	unsigned long	pmod_loc;	/* physical Module location */
+#endif
+	u64		dma_mask;	/* DMA mask for I/O */
+	struct device 	dev;
+};
+
+struct parisc_driver {
+	struct parisc_driver *next;
+	char *name; 
+	const struct parisc_device_id *id_table;
+	int (*probe) (struct parisc_device *dev); /* New device discovered */
+	int (*remove) (struct parisc_device *dev);
+	struct device_driver drv;
+};
+
+
+#define to_parisc_device(d)	container_of(d, struct parisc_device, dev)
+#define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
+#define parisc_parent(d)	to_parisc_device(d->dev.parent)
+
+static inline void
+parisc_set_drvdata(struct parisc_device *d, void *p)
+{
+	dev_set_drvdata(&d->dev, p);
+}
+
+static inline void *
+parisc_get_drvdata(struct parisc_device *d)
+{
+	return dev_get_drvdata(&d->dev);
+}
+
+extern struct bus_type parisc_bus_type;
diff --git a/include/asm-parisc/parport.h b/include/asm-parisc/parport.h
new file mode 100644
index 000000000000..00d9cc3e7b97
--- /dev/null
+++ b/include/asm-parisc/parport.h
@@ -0,0 +1,18 @@
+/* 
+ *
+ * parport.h: ia32-compatible parport initialisation
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H 1
+
+
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	/* nothing ! */
+	return 0;
+}
+
+
+#endif /* !(_ASM_PARPORT_H) */
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
new file mode 100644
index 000000000000..0763c2982fb0
--- /dev/null
+++ b/include/asm-parisc/pci.h
@@ -0,0 +1,241 @@
+#ifndef __ASM_PARISC_PCI_H
+#define __ASM_PARISC_PCI_H
+
+#include <linux/config.h>
+#include <asm/scatterlist.h>
+
+
+
+/*
+** HP PCI platforms generally support multiple bus adapters.
+**    (workstations 1-~4, servers 2-~32)
+**
+** Newer platforms number the busses across PCI bus adapters *sparsely*.
+** E.g. 0, 8, 16, ...
+**
+** Under a PCI bus, most HP platforms support PPBs up to two or three
+** levels deep. See "Bit3" product line. 
+*/
+#define PCI_MAX_BUSSES	256
+
+/*
+** pci_hba_data (aka H2P_OBJECT in HP/UX)
+**
+** This is the "common" or "base" data structure which HBA drivers
+** (eg Dino or LBA) are required to place at the top of their own
+** platform_data structure.  I've heard this called "C inheritance" too.
+**
+** Data needed by pcibios layer belongs here.
+*/
+struct pci_hba_data {
+	void __iomem   *base_addr;	/* aka Host Physical Address */
+	const struct parisc_device *dev; /* device from PA bus walk */
+	struct pci_bus *hba_bus;	/* primary PCI bus below HBA */
+	int		hba_num;	/* I/O port space access "key" */
+	struct resource bus_num;	/* PCI bus numbers */
+	struct resource io_space;	/* PIOP */
+	struct resource lmmio_space;	/* bus addresses < 4Gb */
+	struct resource elmmio_space;	/* additional bus addresses < 4Gb */
+	struct resource gmmio_space;	/* bus addresses > 4Gb */
+
+	/* NOTE: Dino code assumes it can use *all* of the lmmio_space,
+	 * elmmio_space and gmmio_space as a contiguous array of
+	 * resources.  This #define represents the array size */
+	#define DINO_MAX_LMMIO_RESOURCES	3
+
+	unsigned long   lmmio_space_offset;  /* CPU view - PCI view */
+	void *          iommu;          /* IOMMU this device is under */
+	/* REVISIT - spinlock to protect resources? */
+
+	#define HBA_NAME_SIZE 16
+	char io_name[HBA_NAME_SIZE];
+	char lmmio_name[HBA_NAME_SIZE];
+	char elmmio_name[HBA_NAME_SIZE];
+	char gmmio_name[HBA_NAME_SIZE];
+};
+
+#define HBA_DATA(d)		((struct pci_hba_data *) (d))
+
+/* 
+** We support 2^16 I/O ports per HBA.  These are set up in the form
+** 0xbbxxxx, where bb is the bus number and xxxx is the I/O port
+** space address.
+*/
+#define HBA_PORT_SPACE_BITS	16
+
+#define HBA_PORT_BASE(h)	((h) << HBA_PORT_SPACE_BITS)
+#define HBA_PORT_SPACE_SIZE	(1UL << HBA_PORT_SPACE_BITS)
+
+#define PCI_PORT_HBA(a)		((a) >> HBA_PORT_SPACE_BITS)
+#define PCI_PORT_ADDR(a)	((a) & (HBA_PORT_SPACE_SIZE - 1))
+
+#if CONFIG_64BIT
+#define PCI_F_EXTEND		0xffffffff00000000UL
+#define PCI_IS_LMMIO(hba,a)	pci_is_lmmio(hba,a)
+
+/* We need to know if an address is LMMMIO or GMMIO.
+ * LMMIO requires mangling and GMMIO we must use as-is.
+ */
+static __inline__  int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a)
+{
+	return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND);
+}
+
+/*
+** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses.
+** See pcibios.c for more conversions used by Generic PCI code.
+*/
+#define PCI_BUS_ADDR(hba,a)	(PCI_IS_LMMIO(hba,a)	\
+		?  ((a) - hba->lmmio_space_offset)	/* mangle LMMIO */ \
+		: (a))					/* GMMIO */
+#define PCI_HOST_ADDR(hba,a)	((a) + hba->lmmio_space_offset)
+
+#else	/* !CONFIG_64BIT */
+
+#define PCI_BUS_ADDR(hba,a)	(a)
+#define PCI_HOST_ADDR(hba,a)	(a)
+#define PCI_F_EXTEND		0UL
+#define PCI_IS_LMMIO(hba,a)	(1)	/* 32-bit doesn't support GMMIO */
+
+#endif /* !CONFIG_64BIT */
+
+/*
+** KLUGE: linux/pci.h include asm/pci.h BEFORE declaring struct pci_bus
+** (This eliminates some of the warnings).
+*/
+struct pci_bus;
+struct pci_dev;
+
+/*
+ * If the PCI device's view of memory is the same as the CPU's view of memory,
+ * PCI_DMA_BUS_IS_PHYS is true.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#ifdef CONFIG_PA20
+/* All PA-2.0 machines have an IOMMU. */
+#define PCI_DMA_BUS_IS_PHYS	0
+#define parisc_has_iommu()	do { } while (0)
+#else
+
+#if defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA)
+extern int parisc_bus_is_phys; 	/* in arch/parisc/kernel/setup.c */
+#define PCI_DMA_BUS_IS_PHYS	parisc_bus_is_phys
+#define parisc_has_iommu()	do { parisc_bus_is_phys = 0; } while (0)
+#else
+#define PCI_DMA_BUS_IS_PHYS	1
+#define parisc_has_iommu()	do { } while (0)
+#endif
+
+#endif	/* !CONFIG_PA20 */
+
+
+/*
+** Most PCI devices (eg Tulip, NCR720) also export the same registers
+** to both MMIO and I/O port space.  Due to poor performance of I/O Port
+** access under HP PCI bus adapters, strongly reccomend use of MMIO
+** address space.
+**
+** While I'm at it more PA programming notes:
+**
+** 1) MMIO stores (writes) are posted operations. This means the processor
+**    gets an "ACK" before the write actually gets to the device. A read
+**    to the same device (or typically the bus adapter above it) will
+**    force in-flight write transaction(s) out to the targeted device
+**    before the read can complete.
+**
+** 2) The Programmed I/O (PIO) data may not always be strongly ordered with
+**    respect to DMA on all platforms. Ie PIO data can reach the processor
+**    before in-flight DMA reaches memory. Since most SMP PA platforms
+**    are I/O coherent, it generally doesn't matter...but sometimes
+**    it does.
+**
+** I've helped device driver writers debug both types of problems.
+*/
+struct pci_port_ops {
+	  u8 (*inb)  (struct pci_hba_data *hba, u16 port);
+	 u16 (*inw)  (struct pci_hba_data *hba, u16 port);
+	 u32 (*inl)  (struct pci_hba_data *hba, u16 port);
+	void (*outb) (struct pci_hba_data *hba, u16 port,  u8 data);
+	void (*outw) (struct pci_hba_data *hba, u16 port, u16 data);
+	void (*outl) (struct pci_hba_data *hba, u16 port, u32 data);
+};
+
+
+struct pci_bios_ops {
+	void (*init)(void);
+	void (*fixup_bus)(struct pci_bus *bus);
+};
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+** Stuff declared in arch/parisc/kernel/pci.c
+*/
+extern struct pci_port_ops *pci_port;
+extern struct pci_bios_ops *pci_bios;
+extern int pci_post_reset_delay;	/* delay after de-asserting #RESET */
+extern int pci_hba_count;
+extern struct pci_hba_data *parisc_pci_hba[];
+
+#ifdef CONFIG_PCI
+extern void pcibios_register_hba(struct pci_hba_data *);
+extern void pcibios_set_master(struct pci_dev *);
+#else
+extern inline void pcibios_register_hba(struct pci_hba_data *x)
+{
+}
+#endif
+
+/*
+ * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus()
+ *   0 == check if bridge is numbered before re-numbering.
+ *   1 == pci_do_scan_bus() should automatically number all PCI-PCI bridges.
+ *
+ *   We *should* set this to zero for "legacy" platforms and one
+ *   for PAT platforms.
+ *
+ *   But legacy platforms also need to renumber the busses below a Host
+ *   Bus controller.  Adding a 4-port Tulip card on the first PCI root
+ *   bus of a C200 resulted in the secondary bus being numbered as 1.
+ *   The second PCI host bus controller's root bus had already been
+ *   assigned bus number 1 by firmware and sysfs complained.
+ *
+ *   Firmware isn't doing anything wrong here since each controller
+ *   is its own PCI domain.  It's simpler and easier for us to renumber
+ *   the busses rather than treat each Dino as a separate PCI domain.
+ *   Eventually, we may want to introduce PCI domains for Superdome or
+ *   rp7420/8420 boxes and then revisit this issue.
+ */
+#define pcibios_assign_all_busses()     (1)
+#define pcibios_scan_all_fns(a, b)	(0)
+
+#define PCIBIOS_MIN_IO          0x10
+#define PCIBIOS_MIN_MEM         0x1000 /* NBPG - but pci/setup-res.c dies */
+
+/* Don't support DAC yet. */
+#define pci_dac_dma_supported(pci_dev, mask)   (0)
+
+/* export the pci_ DMA API in terms of the dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __ASM_PARISC_PCI_H */
diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h
new file mode 100644
index 000000000000..8e23e4c674f6
--- /dev/null
+++ b/include/asm-parisc/pdc.h
@@ -0,0 +1,781 @@
+#ifndef _PARISC_PDC_H
+#define _PARISC_PDC_H
+
+#include <linux/config.h>
+
+/*
+ *	PDC return values ...
+ *	All PDC calls return a subset of these errors. 
+ */
+
+#define PDC_WARN		  3	/* Call completed with a warning */
+#define PDC_REQ_ERR_1		  2	/* See above			 */
+#define PDC_REQ_ERR_0		  1	/* Call would generate a requestor error */
+#define PDC_OK			  0	/* Call completed successfully	*/
+#define PDC_BAD_PROC		 -1	/* Called non-existent procedure*/
+#define PDC_BAD_OPTION		 -2	/* Called with non-existent option */
+#define PDC_ERROR		 -3	/* Call could not complete without an error */
+#define PDC_NE_MOD		 -5	/* Module not found		*/
+#define PDC_NE_CELL_MOD		 -7	/* Cell module not found	*/
+#define PDC_INVALID_ARG		-10	/* Called with an invalid argument */
+#define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
+#define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/
+
+
+/*
+ *	PDC entry points...
+ */
+
+#define PDC_POW_FAIL	1		/* perform a power-fail		*/
+#define PDC_POW_FAIL_PREPARE	0	/* prepare for powerfail	*/
+
+#define PDC_CHASSIS	2		/* PDC-chassis functions	*/
+#define PDC_CHASSIS_DISP	0	/* update chassis display	*/
+#define PDC_CHASSIS_WARN	1	/* return chassis warnings	*/
+#define PDC_CHASSIS_DISPWARN	2	/* update&return chassis status */
+#define PDC_RETURN_CHASSIS_INFO 128	/* HVERSION dependent: return chassis LED/LCD info  */
+
+#define PDC_PIM         3               /* Get PIM data                 */
+#define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
+#define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
+#define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
+#define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
+#define PDC_PIM_TOC             4       /* Transfer TOC data            */
+
+#define PDC_MODEL	4		/* PDC model information call	*/
+#define PDC_MODEL_INFO		0	/* returns information 		*/
+#define PDC_MODEL_BOOTID	1	/* set the BOOT_ID		*/
+#define PDC_MODEL_VERSIONS	2	/* returns cpu-internal versions*/
+#define PDC_MODEL_SYSMODEL	3	/* return system model info	*/
+#define PDC_MODEL_ENSPEC	4	/* enable specific option	*/
+#define PDC_MODEL_DISPEC	5	/* disable specific option	*/
+#define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
+#define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
+#define PDC_MODEL_GET_BOOT__OP	8	/* returns boot test options	*/
+#define PDC_MODEL_SET_BOOT__OP	9	/* set boot test options	*/
+
+#define PA89_INSTRUCTION_SET	0x4	/* capatibilies returned	*/
+#define PA90_INSTRUCTION_SET	0x8
+
+#define PDC_CACHE	5		/* return/set cache (& TLB) info*/
+#define PDC_CACHE_INFO		0	/* returns information 		*/
+#define PDC_CACHE_SET_COH	1	/* set coherence state		*/
+#define PDC_CACHE_RET_SPID	2	/* returns space-ID bits	*/
+
+#define PDC_HPA		6		/* return HPA of processor	*/
+#define PDC_HPA_PROCESSOR	0
+#define PDC_HPA_MODULES		1
+
+#define PDC_COPROC	7		/* Co-Processor (usually FP unit(s)) */
+#define PDC_COPROC_CFG		0	/* Co-Processor Cfg (FP unit(s) enabled?) */
+
+#define PDC_IODC	8		/* talk to IODC			*/
+#define PDC_IODC_READ		0	/* read IODC entry point	*/
+/*      PDC_IODC_RI_			 * INDEX parameter of PDC_IODC_READ */
+#define PDC_IODC_RI_DATA_BYTES	0	/* IODC Data Bytes		*/
+/*				1, 2	   obsolete - HVERSION dependent*/
+#define PDC_IODC_RI_INIT	3	/* Initialize module		*/
+#define PDC_IODC_RI_IO		4	/* Module input/output		*/
+#define PDC_IODC_RI_SPA		5	/* Module input/output		*/
+#define PDC_IODC_RI_CONFIG	6	/* Module input/output		*/
+/*				7	  obsolete - HVERSION dependent */
+#define PDC_IODC_RI_TEST	8	/* Module input/output		*/
+#define PDC_IODC_RI_TLB		9	/* Module input/output		*/
+#define PDC_IODC_NINIT		2	/* non-destructive init		*/
+#define PDC_IODC_DINIT		3	/* destructive init		*/
+#define PDC_IODC_MEMERR		4	/* check for memory errors	*/
+#define PDC_IODC_INDEX_DATA	0	/* get first 16 bytes from mod IODC */
+#define PDC_IODC_BUS_ERROR	-4	/* bus error return value	*/
+#define PDC_IODC_INVALID_INDEX	-5	/* invalid index return value	*/
+#define PDC_IODC_COUNT		-6	/* count is too small		*/
+
+#define PDC_TOD		9		/* time-of-day clock (TOD)	*/
+#define PDC_TOD_READ		0	/* read TOD			*/
+#define PDC_TOD_WRITE		1	/* write TOD			*/
+#define PDC_TOD_ITIMER		2	/* calibrate Interval Timer (CR16) */
+
+#define PDC_STABLE	10		/* stable storage (sprockets)	*/
+#define PDC_STABLE_READ		0
+#define PDC_STABLE_WRITE	1
+#define PDC_STABLE_RETURN_SIZE	2
+#define PDC_STABLE_VERIFY_CONTENTS 3
+#define PDC_STABLE_INITIALIZE	4
+
+#define PDC_NVOLATILE	11		/* often not implemented	*/
+
+#define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
+#define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */
+
+#define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */
+
+#define PDC_PROC	16		/* (sprockets)			*/
+
+#define PDC_CONFIG	16		/* (sprockets)			*/
+#define PDC_CONFIG_DECONFIG	0
+#define PDC_CONFIG_DRECONFIG	1
+#define PDC_CONFIG_DRETURN_CONFIG 2
+
+#define PDC_BLOCK_TLB	18		/* manage hardware block-TLB	*/
+#define PDC_BTLB_INFO		0	/* returns parameter 		*/
+#define PDC_BTLB_INSERT		1	/* insert BTLB entry		*/
+#define PDC_BTLB_PURGE		2	/* purge BTLB entries 		*/
+#define PDC_BTLB_PURGE_ALL	3	/* purge all BTLB entries 	*/
+
+#define PDC_TLB		19		/* manage hardware TLB miss handling */
+#define PDC_TLB_INFO		0	/* returns parameter 		*/
+#define PDC_TLB_SETUP		1	/* set up miss handling 	*/
+
+#define PDC_MEM		20		/* Manage memory		*/
+#define PDC_MEM_MEMINFO		0
+#define PDC_MEM_ADD_PAGE	1
+#define PDC_MEM_CLEAR_PDT	2
+#define PDC_MEM_READ_PDT	3
+#define PDC_MEM_RESET_CLEAR	4
+#define PDC_MEM_GOODMEM		5
+#define PDC_MEM_TABLE		128	/* Non contig mem map (sprockets) */
+#define PDC_MEM_RETURN_ADDRESS_TABLE	PDC_MEM_TABLE
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE	131
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES	132
+#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
+
+#define PDC_MEM_RET_SBE_REPLACED	5	/* PDC_MEM return values */
+#define PDC_MEM_RET_DUPLICATE_ENTRY	4
+#define PDC_MEM_RET_BUF_SIZE_SMALL	1
+#define PDC_MEM_RET_PDT_FULL		-11
+#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
+
+#ifndef __ASSEMBLY__
+typedef struct {
+    unsigned long long	baseAddr;
+    unsigned int	pages;
+    unsigned int	reserved;
+} MemAddrTable_t;
+#endif
+
+
+#define PDC_PSW		21		/* Get/Set default System Mask  */
+#define PDC_PSW_MASK		0	/* Return mask                  */
+#define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
+#define PDC_PSW_SET_DEFAULTS	2	/* Set default                  */
+#define PDC_PSW_ENDIAN_BIT	1	/* set for big endian           */
+#define PDC_PSW_WIDE_BIT	2	/* set for wide mode            */ 
+
+#define PDC_SYSTEM_MAP	22		/* find system modules		*/
+#define PDC_FIND_MODULE 	0
+#define PDC_FIND_ADDRESS	1
+#define PDC_TRANSLATE_PATH	2
+
+#define PDC_SOFT_POWER	23		/* soft power switch		*/
+#define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
+#define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */
+
+
+/* HVERSION dependent */
+
+/* The PDC_MEM_MAP calls */
+#define PDC_MEM_MAP	128		/* on s700: return page info	*/
+#define PDC_MEM_MAP_HPA		0	/* returns hpa of a module	*/
+
+#define PDC_EEPROM	129		/* EEPROM access		*/
+#define PDC_EEPROM_READ_WORD	0
+#define PDC_EEPROM_WRITE_WORD	1
+#define PDC_EEPROM_READ_BYTE	2
+#define PDC_EEPROM_WRITE_BYTE	3
+#define PDC_EEPROM_EEPROM_PASSWORD -1000
+
+#define PDC_NVM		130		/* NVM (non-volatile memory) access */
+#define PDC_NVM_READ_WORD	0
+#define PDC_NVM_WRITE_WORD	1
+#define PDC_NVM_READ_BYTE	2
+#define PDC_NVM_WRITE_BYTE	3
+
+#define PDC_SEED_ERROR	132		/* (sprockets)			*/
+
+#define PDC_IO		135		/* log error info, reset IO system */
+#define PDC_IO_READ_AND_CLEAR_ERRORS	0
+#define PDC_IO_RESET			1
+#define PDC_IO_RESET_DEVICES		2
+/* sets bits 6&7 (little endian) of the HcControl Register */
+#define PDC_IO_USB_SUSPEND	0xC000000000000000
+#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL	-5	/* return value */
+#define PDC_IO_NO_SUSPEND		-6	/* return value */
+
+#define PDC_BROADCAST_RESET 136		/* reset all processors		*/
+#define PDC_DO_RESET		0	/* option: perform a broadcast reset */
+#define PDC_DO_FIRM_TEST_RESET	1	/* Do broadcast reset with bitmap */
+#define PDC_BR_RECONFIGURATION	2	/* reset w/reconfiguration	*/
+#define PDC_FIRM_TEST_MAGIC	0xab9ec36fUL    /* for this reboot only	*/
+
+#define PDC_LAN_STATION_ID 138		/* Hversion dependent mechanism for */
+#define PDC_LAN_STATION_ID_READ	0	/* getting the lan station address  */
+
+#define	PDC_LAN_STATION_ID_SIZE	6
+
+#define PDC_CHECK_RANGES 139		/* (sprockets)			*/
+
+#define PDC_NV_SECTIONS	141		/* (sprockets)			*/
+
+#define PDC_PERFORMANCE	142		/* performance monitoring	*/
+
+#define PDC_SYSTEM_INFO	143		/* system information		*/
+#define PDC_SYSINFO_RETURN_INFO_SIZE	0
+#define PDC_SYSINFO_RRETURN_SYS_INFO	1
+#define PDC_SYSINFO_RRETURN_ERRORS	2
+#define PDC_SYSINFO_RRETURN_WARNINGS	3
+#define PDC_SYSINFO_RETURN_REVISIONS	4
+#define PDC_SYSINFO_RRETURN_DIAGNOSE	5
+#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE	1005
+
+#define PDC_RDR		144		/* (sprockets)			*/
+#define PDC_RDR_READ_BUFFER	0
+#define PDC_RDR_READ_SINGLE	1
+#define PDC_RDR_WRITE_SINGLE	2
+
+#define PDC_INTRIGUE	145 		/* (sprockets)			*/
+#define PDC_INTRIGUE_WRITE_BUFFER 	 0
+#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
+#define PDC_INTRIGUE_START_CPU_COUNTERS	 2
+#define PDC_INTRIGUE_STOP_CPU_COUNTERS	 3
+
+#define PDC_STI		146 		/* STI access			*/
+/* same as PDC_PCI_XXX values (see below) */
+
+/* Legacy PDC definitions for same stuff */
+#define PDC_PCI_INDEX	147
+#define PDC_PCI_INTERFACE_INFO		0
+#define PDC_PCI_SLOT_INFO		1
+#define PDC_PCI_INFLIGHT_BYTES		2
+#define PDC_PCI_READ_CONFIG		3
+#define PDC_PCI_WRITE_CONFIG		4
+#define PDC_PCI_READ_PCI_IO		5
+#define PDC_PCI_WRITE_PCI_IO		6
+#define PDC_PCI_READ_CONFIG_DELAY	7
+#define PDC_PCI_UPDATE_CONFIG_DELAY	8
+#define PDC_PCI_PCI_PATH_TO_PCI_HPA	9
+#define PDC_PCI_PCI_HPA_TO_PCI_PATH	10
+#define PDC_PCI_PCI_PATH_TO_PCI_BUS	11
+#define PDC_PCI_PCI_RESERVED		12
+#define PDC_PCI_PCI_INT_ROUTE_SIZE	13
+#define PDC_PCI_GET_INT_TBL_SIZE	PDC_PCI_PCI_INT_ROUTE_SIZE
+#define PDC_PCI_PCI_INT_ROUTE		14
+#define PDC_PCI_GET_INT_TBL		PDC_PCI_PCI_INT_ROUTE 
+#define PDC_PCI_READ_MON_TYPE		15
+#define PDC_PCI_WRITE_MON_TYPE		16
+
+
+/* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
+#define PDC_INITIATOR	163
+#define PDC_GET_INITIATOR	0
+#define PDC_SET_INITIATOR	1
+#define PDC_DELETE_INITIATOR	2
+#define PDC_RETURN_TABLE_SIZE	3
+#define PDC_RETURN_TABLE	4
+
+#define PDC_LINK	165 		/* (sprockets)			*/
+#define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
+#define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */
+
+
+/* constants for OS (NVM...) */
+#define OS_ID_NONE		0	/* Undefined OS ID	*/
+#define OS_ID_HPUX		1	/* HP-UX OS		*/
+#define OS_ID_LINUX		OS_ID_HPUX /* just use the same value as hpux */
+#define OS_ID_MPEXL		2	/* MPE XL OS		*/
+#define OS_ID_OSF		3	/* OSF OS		*/
+#define OS_ID_HPRT		4	/* HP-RT OS		*/
+#define OS_ID_NOVEL		5	/* NOVELL OS		*/
+#define OS_ID_NT		6	/* NT OS		*/
+
+
+/* constants for PDC_CHASSIS */
+#define OSTAT_OFF		0
+#define OSTAT_FLT		1 
+#define OSTAT_TEST		2
+#define OSTAT_INIT		3
+#define OSTAT_SHUT		4
+#define OSTAT_WARN		5
+#define OSTAT_RUN		6
+#define OSTAT_ON		7
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+extern int pdc_type;
+
+/* Values for pdc_type */
+#define PDC_TYPE_ILLEGAL	-1
+#define PDC_TYPE_PAT		 0 /* 64-bit PAT-PDC */
+#define PDC_TYPE_SYSTEM_MAP	 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
+#define PDC_TYPE_SNAKE		 2 /* Doesn't support SYSTEM_MAP */
+
+struct pdc_chassis_info {       /* for PDC_CHASSIS_INFO */
+	unsigned long actcnt;   /* actual number of bytes returned */
+	unsigned long maxcnt;   /* maximum number of bytes that could be returned */
+};
+
+struct pdc_coproc_cfg {         /* for PDC_COPROC_CFG */
+        unsigned long ccr_functional;
+        unsigned long ccr_present;
+        unsigned long revision;
+        unsigned long model;
+};
+
+struct pdc_model {		/* for PDC_MODEL */
+	unsigned long hversion;
+	unsigned long sversion;
+	unsigned long hw_id;
+	unsigned long boot_id;
+	unsigned long sw_id;
+	unsigned long sw_cap;
+	unsigned long arch_rev;
+	unsigned long pot_key;
+	unsigned long curr_key;
+};
+
+/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */
+
+#define PDC_MODEL_IOPDIR_FDC            (1 << 2)        /* see sba_iommu.c */
+#define PDC_MODEL_NVA_MASK		(3 << 4)
+#define PDC_MODEL_NVA_SUPPORTED		(0 << 4)
+#define PDC_MODEL_NVA_SLOW		(1 << 4)
+#define PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
+
+struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
+    unsigned long
+#ifdef __LP64__
+		cc_padW:32,
+#endif
+		cc_alias: 4,	/* alias boundaries for virtual addresses   */
+		cc_block: 4,	/* to determine most efficient stride */
+		cc_line	: 3,	/* maximum amount written back as a result of store (multiple of 16 bytes) */
+		cc_shift: 2,	/* how much to shift cc_block left */
+		cc_wt	: 1,	/* 0 = WT-Dcache, 1 = WB-Dcache */
+		cc_sh	: 2,	/* 0 = separate I/D-cache, else shared I/D-cache */
+		cc_cst  : 3,	/* 0 = incoherent D-cache, 1=coherent D-cache */
+		cc_pad1 : 5,	/* reserved */
+		cc_assoc: 8;	/* associativity of I/D-cache */
+};
+
+struct pdc_tlb_cf {		/* for PDC_CACHE (I/D-TLB's) */
+    unsigned long tc_pad0:12,	/* reserved */
+#ifdef __LP64__
+		tc_padW:32,
+#endif
+		tc_sh	: 2,	/* 0 = separate I/D-TLB, else shared I/D-TLB */
+		tc_hv   : 1,	/* HV */
+		tc_page : 1,	/* 0 = 2K page-size-machine, 1 = 4k page size */
+		tc_cst  : 3,	/* 0 = incoherent operations, else coherent operations */
+		tc_aid  : 5,	/* ITLB: width of access ids of processor (encoded!) */
+		tc_pad1 : 8;	/* ITLB: width of space-registers (encoded) */
+};
+
+struct pdc_cache_info {		/* main-PDC_CACHE-structure (caches & TLB's) */
+	/* I-cache */
+	unsigned long	ic_size;	/* size in bytes */
+	struct pdc_cache_cf ic_conf;	/* configuration */
+	unsigned long	ic_base;	/* base-addr */
+	unsigned long	ic_stride;
+	unsigned long	ic_count;
+	unsigned long	ic_loop;
+	/* D-cache */
+	unsigned long	dc_size;	/* size in bytes */
+	struct pdc_cache_cf dc_conf;	/* configuration */
+	unsigned long	dc_base;	/* base-addr */
+	unsigned long	dc_stride;
+	unsigned long	dc_count;
+	unsigned long	dc_loop;
+	/* Instruction-TLB */
+	unsigned long	it_size;	/* number of entries in I-TLB */
+	struct pdc_tlb_cf it_conf;	/* I-TLB-configuration */
+	unsigned long	it_sp_base;
+	unsigned long	it_sp_stride;
+	unsigned long	it_sp_count;
+	unsigned long	it_off_base;
+	unsigned long	it_off_stride;
+	unsigned long	it_off_count;
+	unsigned long	it_loop;
+	/* data-TLB */
+	unsigned long	dt_size;	/* number of entries in D-TLB */
+	struct pdc_tlb_cf dt_conf;	/* D-TLB-configuration */
+	unsigned long	dt_sp_base;
+	unsigned long	dt_sp_stride;
+	unsigned long	dt_sp_count;
+	unsigned long	dt_off_base;
+	unsigned long	dt_off_stride;
+	unsigned long	dt_off_count;
+	unsigned long	dt_loop;
+};
+
+#if 0
+/* If you start using the next struct, you'll have to adjust it to
+ * work with 64-bit firmware I think -PB
+ */
+struct pdc_iodc {     /* PDC_IODC */
+	unsigned char   hversion_model;
+	unsigned char 	hversion;
+	unsigned char 	spa;
+	unsigned char 	type;
+	unsigned int	sversion_rev:4;
+	unsigned int	sversion_model:19;
+	unsigned int	sversion_opt:8;
+	unsigned char	rev;
+	unsigned char	dep;
+	unsigned char	features;
+	unsigned char	pad1;
+	unsigned int	checksum:16;
+	unsigned int	length:16;
+	unsigned int    pad[15];
+} __attribute__((aligned(8))) ;
+#endif
+
+#ifndef CONFIG_PA20
+/* no BLTBs in pa2.0 processors */
+struct pdc_btlb_info_range {
+	__u8 res00;
+	__u8 num_i;
+	__u8 num_d;
+	__u8 num_comb;
+};
+
+struct pdc_btlb_info {	/* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
+	unsigned int min_size;	/* minimum size of BTLB in pages */
+	unsigned int max_size;	/* maximum size of BTLB in pages */
+	struct pdc_btlb_info_range fixed_range_info;
+	struct pdc_btlb_info_range variable_range_info;
+};
+
+#endif /* !CONFIG_PA20 */
+
+#ifdef __LP64__
+struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
+	unsigned long entries_returned;
+	unsigned long entries_total;
+};
+
+struct pdc_memory_table {       /* PDC_MEM/PDC_MEM_TABLE (arguments) */
+	unsigned long paddr;
+	unsigned int  pages;
+	unsigned int  reserved;
+};
+#endif /* __LP64__ */
+
+struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+	unsigned long add_addrs;
+};
+
+struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+};
+
+struct pdc_initiator { /* PDC_INITIATOR */
+	int host_id;
+	int factor;
+	int width;
+	int mode;
+};
+
+struct hardware_path {
+	char  flags;	/* see bit definitions below */
+	char  bc[6];	/* Bus Converter routing info to a specific */
+			/* I/O adaptor (< 0 means none, > 63 resvd) */
+	char  mod;	/* fixed field of specified module */
+};
+
+/*
+ * Device path specifications used by PDC.
+ */
+struct pdc_module_path {
+	struct hardware_path path;
+	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+};
+
+#ifndef CONFIG_PA20
+/* Only used on some pre-PA2.0 boxes */
+struct pdc_memory_map {		/* PDC_MEMORY_MAP */
+	unsigned long hpa;	/* mod's register set address */
+	unsigned long more_pgs;	/* number of additional I/O pgs */
+};
+#endif
+
+struct pdc_tod {
+	unsigned long tod_sec; 
+	unsigned long tod_usec;
+};
+
+/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
+
+struct pdc_hpmc_pim_11 { /* PDC_PIM */
+	__u32 gr[32];
+	__u32 cr[32];
+	__u32 sr[8];
+	__u32 iasq_back;
+	__u32 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 rsvd1;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 rsvd2;
+	__u32 assist_state;
+	__u32 responder_addr;
+	__u32 requestor_addr;
+	__u32 path_info;
+	__u64 fr[32];
+};
+
+/*
+ * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
+ *
+ * Note that PDC_PIM doesn't care whether or not wide mode was enabled
+ * so the results are different on  PA1.1 vs. PA2.0 when in narrow mode.
+ *
+ * Note also that there are unarchitected results available, which
+ * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
+ * the firmware is probably the best way of printing hversion dependent
+ * data.
+ */
+
+struct pdc_hpmc_pim_20 { /* PDC_PIM */
+	__u64 gr[32];
+	__u64 cr[32];
+	__u64 sr[8];
+	__u64 iasq_back;
+	__u64 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 assist_state;
+	__u32 path_info;
+	__u64 responder_addr;
+	__u64 requestor_addr;
+	__u64 fr[32];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* flags of the device_path (see below) */
+#define	PF_AUTOBOOT	0x80
+#define	PF_AUTOSEARCH	0x40
+#define	PF_TIMER	0x0F
+
+#ifndef __ASSEMBLY__
+
+struct device_path {		/* page 1-69 */
+	unsigned char flags;	/* flags see above! */
+	unsigned char bc[6];	/* bus converter routing info */
+	unsigned char mod;
+	unsigned int  layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+	struct	device_path dp;	/* see above */
+	/* struct	iomod *hpa; */
+	unsigned int hpa;	/* HPA base address */
+	/* char	*spa; */
+	unsigned int spa;	/* SPA base address */
+	/* int	(*iodc_io)(struct iomod*, ...); */
+	unsigned int iodc_io;	/* device entry point */
+	short	pad;		/* reserved */
+	unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+#endif /* __ASSEMBLY__ */
+
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define	CL_NULL		0	/* invalid */
+#define	CL_RANDOM	1	/* random access (as disk) */
+#define	CL_SEQU		2	/* sequential access (as tape) */
+#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
+#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
+#define	CL_DISPL	9	/* half-duplex console (display) */
+#define	CL_FC		10	/* FiberChannel access media */
+
+#if 0
+/* FIXME: DEVCLASS_* duplicates CL_* (above).  Delete DEVCLASS_*? */
+#define DEVCLASS_RANDOM		1
+#define DEVCLASS_SEQU		2
+#define DEVCLASS_DUPLEX		7
+#define DEVCLASS_KEYBD		8
+#define DEVCLASS_DISP		9
+#endif
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST	2
+#define ENTRY_INIT_SRCH_NEXT	3
+#define ENTRY_INIT_MOD_DEV	4
+#define ENTRY_INIT_DEV		5
+#define ENTRY_INIT_MOD		6
+#define ENTRY_INIT_MSG		9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN		0
+#define ENTRY_IO_BOOTOUT	1
+#define ENTRY_IO_CIN		2
+#define ENTRY_IO_COUT		3
+#define ENTRY_IO_CLOSE		4
+#define ENTRY_IO_GETMSG		9
+#define ENTRY_IO_BBLOCK_IN	16
+#define ENTRY_IO_BBLOCK_OUT	17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
+
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
+
+#ifndef __ASSEMBLY__
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+struct zeropage {
+	/* [0x000] initialize vectors (VEC) */
+	unsigned int	vec_special;		/* must be zero */
+	/* int	(*vec_pow_fail)(void);*/
+	unsigned int	vec_pow_fail; /* power failure handler */
+	/* int	(*vec_toc)(void); */
+	unsigned int	vec_toc;
+	unsigned int	vec_toclen;
+	/* int	(*vec_rendz)(void); */
+	unsigned int vec_rendz;
+	int	vec_pow_fail_flen;
+	int	vec_pad[10];		
+	
+	/* [0x040] reserved processor dependent */
+	int	pad0[112];
+
+	/* [0x200] reserved */
+	int	pad1[84];
+
+	/* [0x350] memory configuration (MC) */
+	int	memc_cont;		/* contiguous mem size (bytes) */
+	int	memc_phsize;		/* physical memory size */
+	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
+	unsigned int mem_pdc_hi;	/* used for 64-bit */
+
+	/* [0x360] various parameters for the boot-CPU */
+	/* unsigned int *mem_booterr[8]; */
+	unsigned int mem_booterr[8];	/* ptr to boot errors */
+	unsigned int mem_free;		/* first location, where OS can be loaded */
+	/* struct iomod *mem_hpa; */
+	unsigned int mem_hpa;		/* HPA of the boot-CPU */
+	/* int (*mem_pdc)(int, ...); */
+	unsigned int mem_pdc;		/* PDC entry point */
+	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
+
+	/* [0x390] initial memory module (IMM) */
+	/* struct iomod *imm_hpa; */
+	unsigned int imm_hpa;		/* HPA of the IMM */
+	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
+	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
+	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
+
+	/* [0x3A0] boot console, display device and keyboard */
+	struct pz_device mem_cons;	/* description of console device */
+	struct pz_device mem_boot;	/* description of boot device */
+	struct pz_device mem_kbd;	/* description of keyboard device */
+
+	/* [0x430] reserved */
+	int	pad430[116];
+
+	/* [0x600] processor dependent */
+	__u32	pad600[1];
+	__u32	proc_sti;		/* pointer to STI ROM */
+	__u32	pad608[126];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Page Zero constant offsets used by the HPMC handler */
+
+#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+#ifndef __ASSEMBLY__
+void pdc_console_init(void);	/* in pdc_console.c */
+void pdc_console_restart(void);
+
+void setup_pdc(void);		/* in inventory.c */
+
+/* wrapper-functions from pdc.c */
+
+int pdc_add_valid(unsigned long address);
+int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
+int pdc_chassis_disp(unsigned long disp);
+int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
+int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
+		  void *iodc_data, unsigned int iodc_data_size);
+int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
+			     struct pdc_module_path *mod_path, long mod_index);
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, 
+			      long mod_index, long addr_index);
+int pdc_model_info(struct pdc_model *model);
+int pdc_model_sysmodel(char *name);
+int pdc_model_cpuid(unsigned long *cpu_id);
+int pdc_model_versions(unsigned long *versions, int id);
+int pdc_model_capabilities(unsigned long *capabilities);
+int pdc_cache_info(struct pdc_cache_info *cache);
+#ifndef CONFIG_PA20
+int pdc_btlb_info(struct pdc_btlb_info *btlb);
+int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
+#endif /* !CONFIG_PA20 */
+int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
+
+int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_get_size(unsigned long *size);
+int pdc_stable_verify_contents(void);
+int pdc_stable_initialize(void);
+
+int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
+int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
+
+int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
+int pdc_tod_read(struct pdc_tod *tod);
+int pdc_tod_set(unsigned long sec, unsigned long usec);
+
+#ifdef __LP64__
+int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
+		struct pdc_memory_table *tbl, unsigned long entries);
+#endif
+
+void set_firmware_width(void);
+int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
+int pdc_do_reset(void);
+int pdc_soft_power_info(unsigned long *power_reg);
+int pdc_soft_power_button(int sw_control);
+void pdc_io_reset(void);
+void pdc_io_reset_devices(void);
+int pdc_iodc_getc(void);
+void pdc_iodc_putc(unsigned char c);
+void pdc_iodc_outc(unsigned char c);
+void pdc_printf(const char *fmt, ...);
+
+void pdc_emergency_unlock(void);
+int pdc_sti_call(unsigned long func, unsigned long flags,
+                 unsigned long inptr, unsigned long outputr,
+                 unsigned long glob_cfg);
+
+extern void pdc_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PARISC_PDC_H */
diff --git a/include/asm-parisc/pdc_chassis.h b/include/asm-parisc/pdc_chassis.h
new file mode 100644
index 000000000000..adac9ac2743f
--- /dev/null
+++ b/include/asm-parisc/pdc_chassis.h
@@ -0,0 +1,382 @@
+/*
+ *	include/asm-parisc/pdc_chassis.h
+ *
+ *	Copyright (C) 2002 Laurent Canet <canetl@esiee.fr>
+ *	Copyright (C) 2002 Thibaut Varene <varenet@parisc-linux.org>
+ *
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2, or (at your option)
+ *      any later version.
+ *      
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *      
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *      TODO:	- handle processor number on SMP systems (Reporting Entity ID)
+ *      	- handle message ID
+ *      	- handle timestamps
+ */
+ 
+
+#ifndef _PARISC_PDC_CHASSIS_H
+#define _PARISC_PDC_CHASSIS_H
+
+/*
+ * ----------
+ * Prototypes
+ * ----------
+ */
+
+int pdc_chassis_send_status(int message);
+void parisc_pdc_chassis_init(void);
+
+
+/*
+ * -----------------
+ * Direct call names
+ * -----------------
+ * They setup everything for you, the Log message and the corresponding LED state
+ */
+
+#define PDC_CHASSIS_DIRECT_BSTART	0
+#define PDC_CHASSIS_DIRECT_BCOMPLETE	1
+#define PDC_CHASSIS_DIRECT_SHUTDOWN	2
+#define PDC_CHASSIS_DIRECT_PANIC	3
+#define PDC_CHASSIS_DIRECT_HPMC		4
+#define PDC_CHASSIS_DIRECT_LPMC		5
+#define PDC_CHASSIS_DIRECT_DUMP		6	/* not yet implemented */
+#define PDC_CHASSIS_DIRECT_OOPS		7	/* not yet implemented */
+
+
+/*
+ * ------------
+ * LEDs control
+ * ------------
+ * Set the three LEDs -- Run, Attn, and Fault.
+ */
+
+/* Old PDC LED control */
+#define PDC_CHASSIS_DISP_DATA(v)	((unsigned long)(v) << 17)
+
+/* 
+ * Available PDC PAT LED states
+ */
+
+#define PDC_CHASSIS_LED_RUN_OFF		(0ULL << 4)
+#define PDC_CHASSIS_LED_RUN_FLASH	(1ULL << 4)
+#define PDC_CHASSIS_LED_RUN_ON		(2ULL << 4)
+#define PDC_CHASSIS_LED_RUN_NC		(3ULL << 4)
+#define PDC_CHASSIS_LED_ATTN_OFF	(0ULL << 6)
+#define PDC_CHASSIS_LED_ATTN_FLASH	(1ULL << 6)
+#define PDC_CHASSIS_LED_ATTN_NC		(3ULL << 6)	/* ATTN ON is invalid */
+#define PDC_CHASSIS_LED_FAULT_OFF	(0ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_FLASH	(1ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_ON	(2ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_NC	(3ULL << 8)
+#define PDC_CHASSIS_LED_VALID		(1ULL << 10)
+
+/* 
+ * Valid PDC PAT LED states combinations
+ */
+
+/* System running normally */
+#define PDC_CHASSIS_LSTATE_RUN_NORMAL	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* System crashed and rebooted itself successfully */
+#define PDC_CHASSIS_LSTATE_RUN_CRASHREC	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* There was a system interruption that did not take the system down */
+#define PDC_CHASSIS_LSTATE_RUN_SYSINT	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* System running and unexpected reboot or non-critical error detected */
+#define PDC_CHASSIS_LSTATE_RUN_NCRIT	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS_BFAIL	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Unexpected reboot occurred - Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS_UNEXP	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_NONOS_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_BFAIL_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Unexpected reboot/recovering - Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_UNEXP_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Cannot execute PDC */
+#define PDC_CHASSIS_LSTATE_CANNOT_PDC	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - OS not up - PDC has detected a failure that prevents boot */
+#define PDC_CHASSIS_LSTATE_FATAL_BFAIL	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* No code running - Non-critical error detected (double fault situation) */
+#define PDC_CHASSIS_LSTATE_NOCODE_NCRIT	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - OS not up - Fatal failure detected - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_FATAL_NCRIT	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* All other states are invalid */
+
+
+/*
+ * --------------
+ * PDC Log events
+ * --------------
+ * Here follows bits needed to fill up the log event sent to PDC_CHASSIS
+ * The log message contains: Alert level, Source, Source detail,
+ * Source ID, Problem detail, Caller activity, Activity status, 
+ * Caller subactivity, Reporting entity type, Reporting entity ID,
+ * Data type, Unique message ID and EOM. 
+ */
+
+/* Alert level */
+#define PDC_CHASSIS_ALERT_FORWARD	(0ULL << 36)	/* no failure detected */
+#define PDC_CHASSIS_ALERT_SERPROC	(1ULL << 36)	/* service proc - no failure */
+#define PDC_CHASSIS_ALERT_NURGENT	(2ULL << 36)	/* non-urgent operator attn */
+#define PDC_CHASSIS_ALERT_BLOCKED	(3ULL << 36)	/* system blocked */
+#define PDC_CHASSIS_ALERT_CONF_CHG	(4ULL << 36)	/* unexpected configuration change */
+#define PDC_CHASSIS_ALERT_ENV_PB	(5ULL << 36)	/* boot possible, environmental pb */
+#define PDC_CHASSIS_ALERT_PENDING	(6ULL << 36)	/* boot possible, pending failure */
+#define PDC_CHASSIS_ALERT_PERF_IMP	(8ULL << 36)	/* boot possible, performance impaired */
+#define PDC_CHASSIS_ALERT_FUNC_IMP	(10ULL << 36)	/* boot possible, functionality impaired */
+#define PDC_CHASSIS_ALERT_SOFT_FAIL	(12ULL << 36)	/* software failure */
+#define PDC_CHASSIS_ALERT_HANG		(13ULL << 36)	/* system hang */
+#define PDC_CHASSIS_ALERT_ENV_FATAL	(14ULL << 36)	/* fatal power or environmental pb */
+#define PDC_CHASSIS_ALERT_HW_FATAL	(15ULL << 36)	/* fatal hardware problem */
+
+/* Source */
+#define PDC_CHASSIS_SRC_NONE		(0ULL << 28)	/* unknown, no source stated */
+#define PDC_CHASSIS_SRC_PROC		(1ULL << 28)	/* processor */
+/* For later use ? */
+#define PDC_CHASSIS_SRC_PROC_CACHE	(2ULL << 28)	/* processor cache*/
+#define PDC_CHASSIS_SRC_PDH		(3ULL << 28)	/* processor dependent hardware */
+#define PDC_CHASSIS_SRC_PWR		(4ULL << 28)	/* power */
+#define PDC_CHASSIS_SRC_FAB		(5ULL << 28)	/* fabric connector */
+#define PDC_CHASSIS_SRC_PLATi		(6ULL << 28)	/* platform */
+#define PDC_CHASSIS_SRC_MEM		(7ULL << 28)	/* memory */
+#define PDC_CHASSIS_SRC_IO		(8ULL << 28)	/* I/O */
+#define PDC_CHASSIS_SRC_CELL		(9ULL << 28)	/* cell */
+#define PDC_CHASSIS_SRC_PD		(10ULL << 28)	/* protected domain */
+
+/* Source detail field */
+#define PDC_CHASSIS_SRC_D_PROC		(1ULL << 24)	/* processor general */
+
+/* Source ID - platform dependent */
+#define PDC_CHASSIS_SRC_ID_UNSPEC	(0ULL << 16)
+
+/* Problem detail - problem source dependent */
+#define PDC_CHASSIS_PB_D_PROC_NONE	(0ULL << 32)	/* no problem detail */
+#define PDC_CHASSIS_PB_D_PROC_TIMEOUT	(4ULL << 32)	/* timeout */
+
+/* Caller activity */
+#define PDC_CHASSIS_CALL_ACT_HPUX_BL	(7ULL << 12)	/* Boot Loader */
+#define PDC_CHASSIS_CALL_ACT_HPUX_PD	(8ULL << 12)	/* SAL_PD activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_EVENT	(9ULL << 12)	/* SAL_EVENTS activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_IO	(10ULL << 12)	/* SAL_IO activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_PANIC	(11ULL << 12)	/* System panic */
+#define PDC_CHASSIS_CALL_ACT_HPUX_INIT	(12ULL << 12)	/* System initialization */
+#define PDC_CHASSIS_CALL_ACT_HPUX_SHUT	(13ULL << 12)	/* System shutdown */
+#define PDC_CHASSIS_CALL_ACT_HPUX_WARN	(14ULL << 12)	/* System warning */
+#define PDC_CHASSIS_CALL_ACT_HPUX_DU	(15ULL << 12)	/* Display_Activity() update */
+
+/* Activity status - implementation dependent */
+#define PDC_CHASSIS_ACT_STATUS_UNSPEC	(0ULL << 0)
+
+/* Caller subactivity - implementation dependent */
+/* FIXME: other subactivities ? */
+#define PDC_CHASSIS_CALL_SACT_UNSPEC	(0ULL << 4)	/* implementation dependent */
+
+/* Reporting entity type */
+#define PDC_CHASSIS_RET_GENERICOS	(12ULL << 52)	/* generic OSes */
+#define PDC_CHASSIS_RET_IA64_NT		(13ULL << 52)	/* IA-64 NT */
+#define PDC_CHASSIS_RET_HPUX		(14ULL << 52)	/* HP-UX */
+#define PDC_CHASSIS_RET_DIAG		(15ULL << 52)	/* offline diagnostics & utilities */
+
+/* Reporting entity ID */
+#define PDC_CHASSIS_REID_UNSPEC		(0ULL << 44)
+
+/* Data type */
+#define PDC_CHASSIS_DT_NONE		(0ULL << 59)	/* data field unused */
+/* For later use ? Do we need these ? */
+#define PDC_CHASSIS_DT_PHYS_ADDR	(1ULL << 59)	/* physical address */
+#define PDC_CHASSIS_DT_DATA_EXPECT	(2ULL << 59)	/* expected data */
+#define PDC_CHASSIS_DT_ACTUAL		(3ULL << 59)	/* actual data */
+#define PDC_CHASSIS_DT_PHYS_LOC		(4ULL << 59)	/* physical location */
+#define PDC_CHASSIS_DT_PHYS_LOC_EXT	(5ULL << 59)	/* physical location extension */
+#define PDC_CHASSIS_DT_TAG		(6ULL << 59)	/* tag */
+#define PDC_CHASSIS_DT_SYNDROME		(7ULL << 59)	/* syndrome */
+#define PDC_CHASSIS_DT_CODE_ADDR	(8ULL << 59)	/* code address */
+#define PDC_CHASSIS_DT_ASCII_MSG	(9ULL << 59)	/* ascii message */
+#define PDC_CHASSIS_DT_POST		(10ULL << 59)	/* POST code */
+#define PDC_CHASSIS_DT_TIMESTAMP	(11ULL << 59)	/* timestamp */
+#define PDC_CHASSIS_DT_DEV_STAT		(12ULL << 59)	/* device status */
+#define PDC_CHASSIS_DT_DEV_TYPE		(13ULL << 59)	/* device type */
+#define PDC_CHASSIS_DT_PB_DET		(14ULL << 59)	/* problem detail */
+#define PDC_CHASSIS_DT_ACT_LEV		(15ULL << 59)	/* activity level/timeout */
+#define PDC_CHASSIS_DT_SER_NUM		(16ULL << 59)	/* serial number */
+#define PDC_CHASSIS_DT_REV_NUM		(17ULL << 59)	/* revision number */
+#define PDC_CHASSIS_DT_INTERRUPT	(18ULL << 59)	/* interruption information */
+#define PDC_CHASSIS_DT_TEST_NUM		(19ULL << 59)	/* test number */
+#define PDC_CHASSIS_DT_STATE_CHG	(20ULL << 59)	/* major changes in system state */
+#define PDC_CHASSIS_DT_PROC_DEALLOC	(21ULL << 59)	/* processor deallocate */
+#define PDC_CHASSIS_DT_RESET		(30ULL << 59)	/* reset type and cause */
+#define PDC_CHASSIS_DT_PA_LEGACY	(31ULL << 59)	/* legacy PA hex chassis code */
+
+/* System states - part of major changes in system state data field */
+#define PDC_CHASSIS_SYSTATE_BSTART	(0ULL << 0)	/* boot start */
+#define PDC_CHASSIS_SYSTATE_BCOMP	(1ULL << 0)	/* boot complete */
+#define PDC_CHASSIS_SYSTATE_CHANGE	(2ULL << 0)	/* major change */
+#define PDC_CHASSIS_SYSTATE_LED		(3ULL << 0)	/* LED change */
+#define PDC_CHASSIS_SYSTATE_PANIC	(9ULL << 0)	/* OS Panic */
+#define PDC_CHASSIS_SYSTATE_DUMP	(10ULL << 0)	/* memory dump */
+#define PDC_CHASSIS_SYSTATE_HPMC	(11ULL << 0)	/* processing HPMC */
+#define PDC_CHASSIS_SYSTATE_HALT	(15ULL << 0)	/* system halted */
+
+/* Message ID */
+#define PDC_CHASSIS_MSG_ID		(0ULL << 40)	/* we do not handle msg IDs atm */
+
+/* EOM - separates log entries */
+#define PDC_CHASSIS_EOM_CLEAR		(0ULL << 43)
+#define PDC_CHASSIS_EOM_SET		(1ULL << 43)
+
+/*
+ * Preformated well known messages
+ */
+
+/* Boot started */
+#define PDC_CHASSIS_PMSG_BSTART		(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_INIT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_BSTART	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Boot complete */
+#define PDC_CHASSIS_PMSG_BCOMPLETE	(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_INIT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_BCOMP	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Shutdown */
+#define PDC_CHASSIS_PMSG_SHUTDOWN	(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_SHUT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_HALT	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Panic */
+#define PDC_CHASSIS_PMSG_PANIC		(PDC_CHASSIS_ALERT_SOFT_FAIL	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_PANIC| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_PANIC	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+// FIXME: extrapolated data
+/* HPMC */
+#define PDC_CHASSIS_PMSG_HPMC		(PDC_CHASSIS_ALERT_CONF_CHG /*?*/	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_WARN	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_HPMC	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* LPMC */
+#define PDC_CHASSIS_PMSG_LPMC		(PDC_CHASSIS_ALERT_BLOCKED /*?*/| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_WARN	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_CHANGE	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+#endif /* _PARISC_PDC_CHASSIS_H */
+/* vim: set ts=8 */
diff --git a/include/asm-parisc/pdcpat.h b/include/asm-parisc/pdcpat.h
new file mode 100644
index 000000000000..b4b34c0e8c1a
--- /dev/null
+++ b/include/asm-parisc/pdcpat.h
@@ -0,0 +1,337 @@
+#ifndef __PARISC_PATPDC_H
+#define __PARISC_PATPDC_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2000 (c) Hewlett Packard (Paul Bame <bame()spam.parisc-linux.org>)
+ * Copyright 2000,2004 (c) Grant Grundler <grundler()nahspam.parisc-linux.org>
+ */
+
+
+#define PDC_PAT_CELL           	64L   /* Interface for gaining and 
+                                         * manipulatin g cell state within PD */
+#define PDC_PAT_CELL_GET_NUMBER    0L   /* Return Cell number */
+#define PDC_PAT_CELL_GET_INFO      1L   /* Returns info about Cell */
+#define PDC_PAT_CELL_MODULE        2L   /* Returns info about Module */
+#define PDC_PAT_CELL_SET_ATTENTION 9L   /* Set Cell Attention indicator */
+#define PDC_PAT_CELL_NUMBER_TO_LOC 10L   /* Cell Number -> Location */
+#define PDC_PAT_CELL_WALK_FABRIC   11L   /* Walk the Fabric */
+#define PDC_PAT_CELL_GET_RDT_SIZE  12L   /* Return Route Distance Table Sizes */
+#define PDC_PAT_CELL_GET_RDT       13L   /* Return Route Distance Tables */
+#define PDC_PAT_CELL_GET_LOCAL_PDH_SZ 14L /* Read Local PDH Buffer Size */
+#define PDC_PAT_CELL_SET_LOCAL_PDH    15L  /* Write Local PDH Buffer */
+#define PDC_PAT_CELL_GET_REMOTE_PDH_SZ 16L /* Return Remote PDH Buffer Size */
+#define PDC_PAT_CELL_GET_REMOTE_PDH 17L /* Read Remote PDH Buffer */
+#define PDC_PAT_CELL_GET_DBG_INFO   128L  /* Return DBG Buffer Info */
+#define PDC_PAT_CELL_CHANGE_ALIAS   129L  /* Change Non-Equivalent Alias Chacking */
+
+
+/*
+** Arg to PDC_PAT_CELL_MODULE memaddr[4]
+**
+** Addresses on the Merced Bus != all Runway Bus addresses.
+** This is intended for programming SBA/LBA chips range registers.
+*/
+#define IO_VIEW      0UL
+#define PA_VIEW      1UL
+
+/* PDC_PAT_CELL_MODULE entity type values */
+#define	PAT_ENTITY_CA	0	/* central agent */
+#define	PAT_ENTITY_PROC	1	/* processor */
+#define	PAT_ENTITY_MEM	2	/* memory controller */
+#define	PAT_ENTITY_SBA	3	/* system bus adapter */
+#define	PAT_ENTITY_LBA	4	/* local bus adapter */
+#define	PAT_ENTITY_PBC	5	/* processor bus converter */
+#define	PAT_ENTITY_XBC	6	/* crossbar fabric connect */
+#define	PAT_ENTITY_RC	7	/* fabric interconnect */
+
+/* PDC_PAT_CELL_MODULE address range type values */
+#define PAT_PBNUM           0         /* PCI Bus Number */
+#define PAT_LMMIO           1         /* < 4G MMIO Space */
+#define PAT_GMMIO           2         /* > 4G MMIO Space */
+#define PAT_NPIOP           3         /* Non Postable I/O Port Space */
+#define PAT_PIOP            4         /* Postable I/O Port Space */
+#define PAT_AHPA            5         /* Addional HPA Space */
+#define PAT_UFO             6         /* HPA Space (UFO for Mariposa) */
+#define PAT_GNIP            7         /* GNI Reserved Space */
+
+
+
+/* PDC PAT CHASSIS LOG -- Platform logging & forward progress functions */
+
+#define PDC_PAT_CHASSIS_LOG		65L
+#define PDC_PAT_CHASSIS_WRITE_LOG    	0L /* Write Log Entry */
+#define PDC_PAT_CHASSIS_READ_LOG     	1L /* Read  Log Entry */
+
+
+/* PDC PAT CPU  -- CPU configuration within the protection domain */
+
+#define PDC_PAT_CPU                	67L
+#define PDC_PAT_CPU_INFO            	0L /* Return CPU config info */
+#define PDC_PAT_CPU_DELETE          	1L /* Delete CPU */
+#define PDC_PAT_CPU_ADD             	2L /* Add    CPU */
+#define PDC_PAT_CPU_GET_NUMBER      	3L /* Return CPU Number */
+#define PDC_PAT_CPU_GET_HPA         	4L /* Return CPU HPA */
+#define PDC_PAT_CPU_STOP            	5L /* Stop   CPU */
+#define PDC_PAT_CPU_RENDEZVOUS      	6L /* Rendezvous CPU */
+#define PDC_PAT_CPU_GET_CLOCK_INFO  	7L /* Return CPU Clock info */
+#define PDC_PAT_CPU_GET_RENDEZVOUS_STATE 8L /* Return Rendezvous State */
+#define PDC_PAT_CPU_PLUNGE_FABRIC 	128L /* Plunge Fabric */
+#define PDC_PAT_CPU_UPDATE_CACHE_CLEANSING 129L /* Manipulate Cache 
+                                                 * Cleansing Mode */
+/*  PDC PAT EVENT -- Platform Events */
+
+#define PDC_PAT_EVENT              	68L
+#define PDC_PAT_EVENT_GET_CAPS     	0L /* Get Capabilities */
+#define PDC_PAT_EVENT_SET_MODE     	1L /* Set Notification Mode */
+#define PDC_PAT_EVENT_SCAN         	2L /* Scan Event */
+#define PDC_PAT_EVENT_HANDLE       	3L /* Handle Event */
+#define PDC_PAT_EVENT_GET_NB_CALL  	4L /* Get Non-Blocking call Args */
+
+/*  PDC PAT HPMC -- Cause processor to go into spin loop, and wait
+ *  			for wake up from Monarch Processor.
+ */
+
+#define PDC_PAT_HPMC               70L
+#define PDC_PAT_HPMC_RENDEZ_CPU     0L /* go into spin loop */
+#define PDC_PAT_HPMC_SET_PARAMS     1L /* Allows OS to specify intr which PDC 
+                                        * will use to interrupt OS during
+                                        * machine check rendezvous */
+
+/* parameters for PDC_PAT_HPMC_SET_PARAMS: */
+#define HPMC_SET_PARAMS_INTR 	    1L /* Rendezvous Interrupt */
+#define HPMC_SET_PARAMS_WAKE 	    2L /* Wake up processor */
+
+
+/*  PDC PAT IO  -- On-line services for I/O modules */
+
+#define PDC_PAT_IO                  71L
+#define PDC_PAT_IO_GET_SLOT_STATUS   	5L /* Get Slot Status Info*/
+#define PDC_PAT_IO_GET_LOC_FROM_HARDWARE 6L /* Get Physical Location from */
+                                            /* Hardware Path */
+#define PDC_PAT_IO_GET_HARDWARE_FROM_LOC 7L /* Get Hardware Path from 
+                                             * Physical Location */
+#define PDC_PAT_IO_GET_PCI_CONFIG_FROM_HW 11L /* Get PCI Configuration
+                                               * Address from Hardware Path */
+#define PDC_PAT_IO_GET_HW_FROM_PCI_CONFIG 12L /* Get Hardware Path 
+                                               * from PCI Configuration Address */
+#define PDC_PAT_IO_READ_HOST_BRIDGE_INFO 13L  /* Read Host Bridge State Info */
+#define PDC_PAT_IO_CLEAR_HOST_BRIDGE_INFO 14L /* Clear Host Bridge State Info*/
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE 15L /* Get PCI INT Routing Table 
+                                                   * Size */
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE  16L /* Get PCI INT Routing Table */
+#define PDC_PAT_IO_GET_HINT_TABLE_SIZE 	17L /* Get Hint Table Size */
+#define PDC_PAT_IO_GET_HINT_TABLE   	18L /* Get Hint Table */
+#define PDC_PAT_IO_PCI_CONFIG_READ  	19L /* PCI Config Read */
+#define PDC_PAT_IO_PCI_CONFIG_WRITE 	20L /* PCI Config Write */
+#define PDC_PAT_IO_GET_NUM_IO_SLOTS 	21L /* Get Number of I/O Bay Slots in 
+                                       		  * Cabinet */
+#define PDC_PAT_IO_GET_LOC_IO_SLOTS 	22L /* Get Physical Location of I/O */
+                                   		     /* Bay Slots in Cabinet */
+#define PDC_PAT_IO_BAY_STATUS_INFO  	28L /* Get I/O Bay Slot Status Info */
+#define PDC_PAT_IO_GET_PROC_VIEW        29L /* Get Processor view of IO address */
+#define PDC_PAT_IO_PROG_SBA_DIR_RANGE   30L /* Program directed range */
+
+
+/* PDC PAT MEM  -- Manage memory page deallocation */
+
+#define PDC_PAT_MEM            72L
+#define PDC_PAT_MEM_PD_INFO     	0L /* Return PDT info for PD       */
+#define PDC_PAT_MEM_PD_CLEAR    	1L /* Clear PDT for PD             */
+#define PDC_PAT_MEM_PD_READ     	2L /* Read PDT entries for PD      */
+#define PDC_PAT_MEM_PD_RESET    	3L /* Reset clear bit for PD       */
+#define PDC_PAT_MEM_CELL_INFO   	5L /* Return PDT info For Cell     */
+#define PDC_PAT_MEM_CELL_CLEAR  	6L /* Clear PDT For Cell           */
+#define PDC_PAT_MEM_CELL_READ   	7L /* Read PDT entries For Cell    */
+#define PDC_PAT_MEM_CELL_RESET  	8L /* Reset clear bit For Cell     */
+#define PDC_PAT_MEM_SETGM	  	9L /* Set Golden Memory value      */
+#define PDC_PAT_MEM_ADD_PAGE    	10L /* ADDs a page to the cell      */
+#define PDC_PAT_MEM_ADDRESS     	11L /* Get Physical Location From   */
+                                    		 /* Memory Address               */
+#define PDC_PAT_MEM_GET_TXT_SIZE   	12L /* Get Formatted Text Size   */
+#define PDC_PAT_MEM_GET_PD_TXT     	13L /* Get PD Formatted Text     */
+#define PDC_PAT_MEM_GET_CELL_TXT   	14L /* Get Cell Formatted Text   */
+#define PDC_PAT_MEM_RD_STATE_INFO  	15L /* Read Mem Module State Info*/
+#define PDC_PAT_MEM_CLR_STATE_INFO 	16L /*Clear Mem Module State Info*/
+#define PDC_PAT_MEM_CLEAN_RANGE    	128L /*Clean Mem in specific range*/
+#define PDC_PAT_MEM_GET_TBL_SIZE   	131L /* Get Memory Table Size     */
+#define PDC_PAT_MEM_GET_TBL        	132L /* Get Memory Table          */
+
+
+/* PDC PAT NVOLATILE  --  Access Non-Volatile Memory */
+
+#define PDC_PAT_NVOLATILE	73L
+#define PDC_PAT_NVOLATILE_READ		0L /* Read Non-Volatile Memory   */
+#define PDC_PAT_NVOLATILE_WRITE		1L /* Write Non-Volatile Memory  */
+#define PDC_PAT_NVOLATILE_GET_SIZE	2L /* Return size of NVM         */
+#define PDC_PAT_NVOLATILE_VERIFY	3L /* Verify contents of NVM     */
+#define PDC_PAT_NVOLATILE_INIT		4L /* Initialize NVM             */
+
+/* PDC PAT PD */
+#define PDC_PAT_PD		74L         /* Protection Domain Info   */
+#define PDC_PAT_PD_GET_ADDR_MAP		0L  /* Get Address Map          */
+
+/* PDC_PAT_PD_GET_ADDR_MAP entry types */
+#define PAT_MEMORY_DESCRIPTOR		1   
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory types */
+#define PAT_MEMTYPE_MEMORY		0
+#define PAT_MEMTYPE_FIRMWARE		4
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory usage */
+#define PAT_MEMUSE_GENERAL		0
+#define PAT_MEMUSE_GI			128
+#define PAT_MEMUSE_GNI			129
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT
+#define is_pdc_pat()	(PDC_TYPE_PAT == pdc_type)
+extern int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num);
+extern int pdc_pat_get_irt(void *r_addr, unsigned long cell_num);
+#else	/* ! CONFIG_64BIT */
+/* No PAT support for 32-bit kernels...sorry */
+#define is_pdc_pat()	(0)
+#define pdc_pat_get_irt_size(num_entries, cell_numn)	PDC_BAD_PROC
+#define pdc_pat_get_irt(r_addr, cell_num)		PDC_BAD_PROC
+#endif	/* ! CONFIG_64BIT */
+
+
+struct pdc_pat_cell_num {
+	unsigned long cell_num;
+	unsigned long cell_loc;
+};
+
+struct pdc_pat_cpu_num {
+	unsigned long cpu_num;
+	unsigned long cpu_loc;
+};
+
+struct pdc_pat_pd_addr_map_entry {
+	unsigned char entry_type;       /* 1 = Memory Descriptor Entry Type */
+	unsigned char reserve1[5];
+	unsigned char memory_type;
+	unsigned char memory_usage;
+	unsigned long paddr;
+	unsigned int  pages;            /* Length in 4K pages */
+	unsigned int  reserve2;
+	unsigned long cell_map;
+};
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr
+* ----------------------------------------------------------
+* Bit  0 to 51 - conf_base_addr
+* Bit 52 to 62 - reserved
+* Bit       63 - endianess bit
+********************************************************************/
+#define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL)
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info
+* ----------------------------------------------------
+* Bit  0 to  7 - entity type
+*    0 = central agent,            1 = processor,
+*    2 = memory controller,        3 = system bus adapter,
+*    4 = local bus adapter,        5 = processor bus converter,
+*    6 = crossbar fabric connect,  7 = fabric interconnect,
+*    8 to 254 reserved,            255 = unknown.
+* Bit  8 to 15 - DVI
+* Bit 16 to 23 - IOC functions
+* Bit 24 to 39 - reserved
+* Bit 40 to 63 - mod_pages
+*    number of 4K pages a module occupies starting at conf_base_addr
+********************************************************************/
+#define PAT_GET_ENTITY(value)	(((value) >> 56) & 0xffUL)
+#define PAT_GET_DVI(value)	(((value) >> 48) & 0xffUL)
+#define PAT_GET_IOC(value)	(((value) >> 40) & 0xffUL)
+#define PAT_GET_MOD_PAGES(value)(((value) & 0xffffffUL)
+
+
+/*
+** PDC_PAT_CELL_GET_INFO return block
+*/
+typedef struct pdc_pat_cell_info_rtn_block {
+	unsigned long cpu_info;
+	unsigned long cell_info;
+	unsigned long cell_location;
+	unsigned long reo_location;
+	unsigned long mem_size;
+	unsigned long dimm_status;
+	unsigned long pdc_rev;
+	unsigned long fabric_info0;
+	unsigned long fabric_info1;
+	unsigned long fabric_info2;
+	unsigned long fabric_info3;
+	unsigned long reserved[21];
+} pdc_pat_cell_info_rtn_block_t;
+
+
+/* FIXME: mod[508] should really be a union of the various mod components */
+struct pdc_pat_cell_mod_maddr_block {	/* PDC_PAT_CELL_MODULE */
+	unsigned long cba;		/* func 0 cfg space address */
+	unsigned long mod_info;		/* module information */
+	unsigned long mod_location;	/* physical location of the module */
+	struct hardware_path mod_path;	/* module path (device path - layers) */
+	unsigned long mod[508];		/* PAT cell module components */
+} __attribute__((aligned(8))) ;
+
+typedef struct pdc_pat_cell_mod_maddr_block pdc_pat_cell_mod_maddr_block_t;
+
+
+extern int pdc_pat_chassis_send_log(unsigned long status, unsigned long data);
+extern int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info);
+extern int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, unsigned long view_type, void *mem_addr);
+extern int pdc_pat_cell_num_to_loc(void *, unsigned long);
+
+extern int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa);
+
+extern int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, unsigned long count, unsigned long offset);
+
+
+extern int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *val); 
+extern int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val); 
+
+
+/* Flag to indicate this is a PAT box...don't use this unless you
+** really have to...it might go away some day.
+*/
+extern int pdc_pat;     /* arch/parisc/kernel/inventory.c */
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr
+* ----------------------------------------------------------
+* Bit  0 to 51 - conf_base_addr
+* Bit 52 to 62 - reserved
+* Bit       63 - endianess bit
+********************************************************************/
+#define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL)
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info
+* ----------------------------------------------------
+* Bit  0 to  7 - entity type
+*    0 = central agent,            1 = processor,
+*    2 = memory controller,        3 = system bus adapter,
+*    4 = local bus adapter,        5 = processor bus converter,
+*    6 = crossbar fabric connect,  7 = fabric interconnect,
+*    8 to 254 reserved,            255 = unknown.
+* Bit  8 to 15 - DVI
+* Bit 16 to 23 - IOC functions
+* Bit 24 to 39 - reserved
+* Bit 40 to 63 - mod_pages
+*    number of 4K pages a module occupies starting at conf_base_addr
+********************************************************************/
+#define PAT_GET_ENTITY(value)	(((value) >> 56) & 0xffUL)
+#define PAT_GET_DVI(value)	(((value) >> 48) & 0xffUL)
+#define PAT_GET_IOC(value)	(((value) >> 40) & 0xffUL)
+#define PAT_GET_MOD_PAGES(value)(((value) & 0xffffffUL)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! __PARISC_PATPDC_H */
diff --git a/include/asm-parisc/percpu.h b/include/asm-parisc/percpu.h
new file mode 100644
index 000000000000..a0dcd1970128
--- /dev/null
+++ b/include/asm-parisc/percpu.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_PERCPU_H
+#define _PARISC_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif 
+
diff --git a/include/asm-parisc/perf.h b/include/asm-parisc/perf.h
new file mode 100644
index 000000000000..a18e11972c09
--- /dev/null
+++ b/include/asm-parisc/perf.h
@@ -0,0 +1,74 @@
+#ifndef _ASM_PERF_H_
+#define _ASM_PERF_H_
+
+/* ioctls */
+#define PA_PERF_ON	_IO('p', 1)
+#define PA_PERF_OFF	_IOR('p', 2, unsigned int)
+#define PA_PERF_VERSION	_IOR('p', 3, int)
+
+#define PA_PERF_DEV	"perf"
+#define PA_PERF_MINOR	146
+
+/* Interface types */
+#define UNKNOWN_INTF    255
+#define ONYX_INTF         0
+#define CUDA_INTF         1
+
+/* Common Onyx and Cuda images */
+#define CPI                 0
+#define BUSUTIL             1
+#define TLBMISS             2
+#define TLBHANDMISS         3
+#define PTKN                4
+#define PNTKN               5
+#define IMISS               6
+#define DMISS               7
+#define DMISS_ACCESS        8 
+#define BIG_CPI 	    9
+#define BIG_LS		   10  
+#define BR_ABORT	   11
+#define ISNT		   12 
+#define QUADRANT           13
+#define RW_PDFET           14
+#define RW_WDFET           15
+#define SHLIB_CPI          16
+
+/* Cuda only Images */
+#define FLOPS              17
+#define CACHEMISS          18 
+#define BRANCHES           19             
+#define CRSTACK            20 
+#define I_CACHE_SPEC       21 
+#define MAX_CUDA_IMAGES    22 
+
+/* Onyx only Images */
+#define ADDR_INV_ABORT_ALU 17
+#define BRAD_STALL	   18 
+#define CNTL_IN_PIPEL	   19 
+#define DSNT_XFH	   20 
+#define FET_SIG1	   21 
+#define FET_SIG2	   22 
+#define G7_1		   23 
+#define G7_2		   24 
+#define G7_3 		   25
+#define G7_4		   26
+#define MPB_LABORT         27
+#define PANIC              28
+#define RARE_INST          29 
+#define RW_DFET            30 
+#define RW_IFET            31 
+#define RW_SDFET           32 
+#define SPEC_IFET          33 
+#define ST_COND0           34 
+#define ST_COND1           35 
+#define ST_COND2           36
+#define ST_COND3           37
+#define ST_COND4           38
+#define ST_UNPRED0         39 
+#define ST_UNPRED1         40 
+#define UNPRED             41 
+#define GO_STORE           42
+#define SHLIB_CALL         43
+#define MAX_ONYX_IMAGES    44
+
+#endif
diff --git a/include/asm-parisc/pgalloc.h b/include/asm-parisc/pgalloc.h
new file mode 100644
index 000000000000..6291d6692e5d
--- /dev/null
+++ b/include/asm-parisc/pgalloc.h
@@ -0,0 +1,143 @@
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/gfp.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+
+#include <asm/cache.h>
+
+/* Allocate the top level pgd (page directory)
+ *
+ * Here (for 64 bit kernels) we implement a Hybrid L2/L3 scheme: we
+ * allocate the first pmd adjacent to the pgd.  This means that we can
+ * subtract a constant offset to get to it.  The pmd and pgd sizes are
+ * arranged so that a single pmd covers 4GB (giving a full LP64
+ * process access to 8TB) so our lookups are effectively L2 for the
+ * first 4GB of the kernel (i.e. for all ILP32 processes and all the
+ * kernel for machines with under 4GB of memory) */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = (pgd_t *)__get_free_pages(GFP_KERNEL,
+					       PGD_ALLOC_ORDER);
+	pgd_t *actual_pgd = pgd;
+
+	if (likely(pgd != NULL)) {
+		memset(pgd, 0, PAGE_SIZE<<PGD_ALLOC_ORDER);
+#ifdef __LP64__
+		actual_pgd += PTRS_PER_PGD;
+		/* Populate first pmd with allocated memory.  We mark it
+		 * with PxD_FLAG_ATTACHED as a signal to the system that this
+		 * pmd entry may not be cleared. */
+		__pgd_val_set(*actual_pgd, (PxD_FLAG_PRESENT | 
+				        PxD_FLAG_VALID | 
+					PxD_FLAG_ATTACHED) 
+			+ (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT));
+		/* The first pmd entry also is marked with _PAGE_GATEWAY as
+		 * a signal that this pmd may not be freed */
+		__pgd_val_set(*pgd, PxD_FLAG_ATTACHED);
+#endif
+	}
+	return actual_pgd;
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+#ifdef __LP64__
+	pgd -= PTRS_PER_PGD;
+#endif
+	free_pages((unsigned long)pgd, PGD_ALLOC_ORDER);
+}
+
+#if PT_NLEVELS == 3
+
+/* Three Level Page Table Support for pmd's */
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	__pgd_val_set(*pgd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) +
+		        (__u32)(__pa((unsigned long)pmd) >> PxD_VALUE_SHIFT));
+}
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd = (pmd_t *)__get_free_pages(GFP_KERNEL|__GFP_REPEAT,
+					       PMD_ORDER);
+	if (pmd)
+		memset(pmd, 0, PAGE_SIZE<<PMD_ORDER);
+	return pmd;
+}
+
+static inline void pmd_free(pmd_t *pmd)
+{
+#ifdef __LP64__
+	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		/* This is the permanent pmd attached to the pgd;
+		 * cannot free it */
+		return;
+#endif
+	free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#else
+
+/* Two Level Page Table Support for pmd's */
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+#endif
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+#ifdef __LP64__
+	/* preserve the gateway marker if this is the beginning of
+	 * the permanent pmd */
+	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		__pmd_val_set(*pmd, (PxD_FLAG_PRESENT |
+				 PxD_FLAG_VALID |
+				 PxD_FLAG_ATTACHED) 
+			+ (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT));
+	else
+#endif
+		__pmd_val_set(*pmd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) 
+			+ (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT));
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+
+static inline struct page *
+pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *page = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return page;
+}
+
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return pte;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+#define pte_free(page)	pte_free_kernel(page_address(page))
+
+extern int do_check_pgt_cache(int, int);
+#define check_pgt_cache()	do { } while (0)
+
+#endif
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
new file mode 100644
index 000000000000..af353a9bce21
--- /dev/null
+++ b/include/asm-parisc/pgtable.h
@@ -0,0 +1,522 @@
+#ifndef _PARISC_PGTABLE_H
+#define _PARISC_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/fixmap.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * we simulate an x86-style page table for the linux mm code
+ */
+
+#include <linux/spinlock.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/bitops.h>
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for parisc.
+ */
+#define kern_addr_valid(addr)	(1)
+
+/* Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                                 \
+        do{                                                     \
+                *(pteptr) = (pteval);                           \
+        } while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#endif /* !__ASSEMBLY__ */
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
+
+ /* Note: If you change ISTACK_SIZE, you need to change the corresponding
+  * values in vmlinux.lds and vmlinux64.lds (init_istack section). Also,
+  * the "order" and size need to agree.
+  */
+
+#define  ISTACK_SIZE  32768 /* Interrupt Stack Size */
+#define  ISTACK_ORDER 3
+
+/* This is the size of the initially mapped kernel memory (i.e. currently
+ * 0 to 1<<23 == 8MB */
+#ifdef CONFIG_64BIT
+#define KERNEL_INITIAL_ORDER	24
+#else
+#define KERNEL_INITIAL_ORDER	23
+#endif
+#define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)
+
+#ifdef CONFIG_64BIT
+#define PT_NLEVELS	3
+#define PGD_ORDER	1 /* Number of pages per pgd */
+#define PMD_ORDER	1 /* Number of pages per pmd */
+#define PGD_ALLOC_ORDER	2 /* first pgd contains pmd */
+#else
+#define PT_NLEVELS	2
+#define PGD_ORDER	1 /* Number of pages per pgd */
+#define PGD_ALLOC_ORDER	PGD_ORDER
+#endif
+
+/* Definitions for 3rd level (we use PLD here for Page Lower directory
+ * because PTE_SHIFT is used lower down to mean shift that has to be
+ * done to get usable bits out of the PTE) */
+#define PLD_SHIFT	PAGE_SHIFT
+#define PLD_SIZE	PAGE_SIZE
+#define BITS_PER_PTE	(PAGE_SHIFT - BITS_PER_PTE_ENTRY)
+#define PTRS_PER_PTE    (1UL << BITS_PER_PTE)
+
+/* Definitions for 2nd level */
+#define pgtable_cache_init()	do { } while (0)
+
+#define PMD_SHIFT       (PLD_SHIFT + BITS_PER_PTE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#if PT_NLEVELS == 3
+#define BITS_PER_PMD	(PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
+#else
+#define BITS_PER_PMD	0
+#endif
+#define PTRS_PER_PMD    (1UL << BITS_PER_PMD)
+
+/* Definitions for 1st level */
+#define PGDIR_SHIFT	(PMD_SHIFT + BITS_PER_PMD)
+#define BITS_PER_PGD	(PAGE_SHIFT + PGD_ORDER - BITS_PER_PGD_ENTRY)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD    (1UL << BITS_PER_PGD)
+#define USER_PTRS_PER_PGD       PTRS_PER_PGD
+
+#define MAX_ADDRBITS	(PGDIR_SHIFT + BITS_PER_PGD)
+#define MAX_ADDRESS	(1UL << MAX_ADDRBITS)
+
+#define SPACEID_SHIFT (MAX_ADDRBITS - 32)
+
+/* This calculates the number of initial pages we need for the initial
+ * page tables */
+#define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT))
+
+/*
+ * pgd entries used up by user/kernel:
+ */
+
+#define FIRST_USER_PGD_NR	0
+
+#ifndef __ASSEMBLY__
+extern  void *vmalloc_start;
+#define PCXL_DMA_MAP_SIZE   (8*1024*1024)
+#define VMALLOC_START   ((unsigned long)vmalloc_start)
+/* this is a fixmap remnant, see fixmap.h */
+#define VMALLOC_END	(KERNEL_MAP_END)
+#endif
+
+/* NB: The tlb miss handlers make certain assumptions about the order */
+/*     of the following bits, so be careful (One example, bits 25-31  */
+/*     are moved together in one instruction).                        */
+
+#define _PAGE_READ_BIT     31   /* (0x001) read access allowed */
+#define _PAGE_WRITE_BIT    30   /* (0x002) write access allowed */
+#define _PAGE_EXEC_BIT     29   /* (0x004) execute access allowed */
+#define _PAGE_GATEWAY_BIT  28   /* (0x008) privilege promotion allowed */
+#define _PAGE_DMB_BIT      27   /* (0x010) Data Memory Break enable (B bit) */
+#define _PAGE_DIRTY_BIT    26   /* (0x020) Page Dirty (D bit) */
+#define _PAGE_FILE_BIT	_PAGE_DIRTY_BIT	/* overload this bit */
+#define _PAGE_REFTRAP_BIT  25   /* (0x040) Page Ref. Trap enable (T bit) */
+#define _PAGE_NO_CACHE_BIT 24   /* (0x080) Uncached Page (U bit) */
+#define _PAGE_ACCESSED_BIT 23   /* (0x100) Software: Page Accessed */
+#define _PAGE_PRESENT_BIT  22   /* (0x200) Software: translation valid */
+#define _PAGE_FLUSH_BIT    21   /* (0x400) Software: translation valid */
+				/*             for cache flushing only */
+#define _PAGE_USER_BIT     20   /* (0x800) Software: User accessible page */
+
+/* N.B. The bits are defined in terms of a 32 bit word above, so the */
+/*      following macro is ok for both 32 and 64 bit.                */
+
+#define xlate_pabit(x) (31 - x)
+
+/* this defines the shift to the usable bits in the PTE it is set so
+ * that the valid bits _PAGE_PRESENT_BIT and _PAGE_USER_BIT are set
+ * to zero */
+#define PTE_SHIFT	   	xlate_pabit(_PAGE_USER_BIT)
+
+/* this is how many bits may be used by the file functions */
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_SHIFT)
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << PTE_SHIFT) | _PAGE_FILE })
+
+#define _PAGE_READ     (1 << xlate_pabit(_PAGE_READ_BIT))
+#define _PAGE_WRITE    (1 << xlate_pabit(_PAGE_WRITE_BIT))
+#define _PAGE_RW       (_PAGE_READ | _PAGE_WRITE)
+#define _PAGE_EXEC     (1 << xlate_pabit(_PAGE_EXEC_BIT))
+#define _PAGE_GATEWAY  (1 << xlate_pabit(_PAGE_GATEWAY_BIT))
+#define _PAGE_DMB      (1 << xlate_pabit(_PAGE_DMB_BIT))
+#define _PAGE_DIRTY    (1 << xlate_pabit(_PAGE_DIRTY_BIT))
+#define _PAGE_REFTRAP  (1 << xlate_pabit(_PAGE_REFTRAP_BIT))
+#define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
+#define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
+#define _PAGE_PRESENT  (1 << xlate_pabit(_PAGE_PRESENT_BIT))
+#define _PAGE_FLUSH    (1 << xlate_pabit(_PAGE_FLUSH_BIT))
+#define _PAGE_USER     (1 << xlate_pabit(_PAGE_USER_BIT))
+#define _PAGE_FILE     (1 << xlate_pabit(_PAGE_FILE_BIT))
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE |  _PAGE_DIRTY | _PAGE_ACCESSED)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_KERNEL	(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+/* The pgd/pmd contains a ptr (in phys addr space); since all pgds/pmds
+ * are page-aligned, we don't care about the PAGE_OFFSET bits, except
+ * for a few meta-information bits, so we shift the address to be
+ * able to effectively address 40-bits of physical address space. */
+#define _PxD_PRESENT_BIT   31
+#define _PxD_ATTACHED_BIT  30
+#define _PxD_VALID_BIT     29
+
+#define PxD_FLAG_PRESENT  (1 << xlate_pabit(_PxD_PRESENT_BIT))
+#define PxD_FLAG_ATTACHED (1 << xlate_pabit(_PxD_ATTACHED_BIT))
+#define PxD_FLAG_VALID    (1 << xlate_pabit(_PxD_VALID_BIT))
+#define PxD_FLAG_MASK     (0xf)
+#define PxD_FLAG_SHIFT    (4)
+#define PxD_VALUE_SHIFT   (8)
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_ACCESSED)
+/* Others seem to make this executable, I don't know if that's correct
+   or not.  The stack is mapped this way though so this is necessary
+   in the short term - dhd@linuxcare.com, 2000-08-08 */
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_WRITEONLY  __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITE | _PAGE_ACCESSED)
+#define PAGE_EXECREAD   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_EXEC |_PAGE_ACCESSED)
+#define PAGE_COPY       PAGE_EXECREAD
+#define PAGE_RWX        __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_EXEC |_PAGE_ACCESSED)
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_UNC	__pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
+#define PAGE_GATEWAY    __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_GATEWAY| _PAGE_READ)
+#define PAGE_FLUSH      __pgprot(_PAGE_FLUSH)
+
+
+/*
+ * We could have an execute only page using "gateway - promote to priv
+ * level 3", but that is kind of silly. So, the way things are defined
+ * now, we must always have read permission for pages with execute
+ * permission. For the fun of it we'll go ahead and support write only
+ * pages.
+ */
+
+	 /*xwr*/
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  __P000 /* copy on write */
+#define __P011  __P001 /* copy on write */
+#define __P100  PAGE_EXECREAD
+#define __P101  PAGE_EXECREAD
+#define __P110  __P100 /* copy on write */
+#define __P111  __P101 /* copy on write */
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_WRITEONLY
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_EXECREAD
+#define __S101  PAGE_EXECREAD
+#define __S110  PAGE_RWX
+#define __S111  PAGE_RWX
+
+extern pgd_t swapper_pg_dir[]; /* declared in init_task.c */
+
+/* initial page tables for 0-8MB for kernel */
+
+extern pte_t pg0[];
+
+/* zero page used for uninitialized stuff */
+
+extern unsigned long *empty_zero_page;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#define pte_none(x)     ((pte_val(x) == 0) || (pte_val(x) & _PAGE_FLUSH))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
+
+#define pmd_flag(x)	(pmd_val(x) & PxD_FLAG_MASK)
+#define pmd_address(x)	((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
+#define pgd_flag(x)	(pgd_val(x) & PxD_FLAG_MASK)
+#define pgd_address(x)	((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
+
+#ifdef CONFIG_64BIT
+/* The first entry of the permanent pmd is not there if it contains
+ * the gateway marker */
+#define pmd_none(x)	(!pmd_val(x) || pmd_flag(x) == PxD_FLAG_ATTACHED)
+#else
+#define pmd_none(x)	(!pmd_val(x))
+#endif
+#define pmd_bad(x)	(!(pmd_flag(x) & PxD_FLAG_VALID))
+#define pmd_present(x)	(pmd_flag(x) & PxD_FLAG_PRESENT)
+static inline void pmd_clear(pmd_t *pmd) {
+#ifdef CONFIG_64BIT
+	if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		/* This is the entry pointing to the permanent pmd
+		 * attached to the pgd; cannot clear it */
+		__pmd_val_set(*pmd, PxD_FLAG_ATTACHED);
+	else
+#endif
+		__pmd_val_set(*pmd,  0);
+}
+
+
+
+#if PT_NLEVELS == 3
+#define pgd_page(pgd) ((unsigned long) __va(pgd_address(pgd)))
+
+/* For 64 bit we have three level tables */
+
+#define pgd_none(x)     (!pgd_val(x))
+#define pgd_bad(x)      (!(pgd_flag(x) & PxD_FLAG_VALID))
+#define pgd_present(x)  (pgd_flag(x) & PxD_FLAG_PRESENT)
+static inline void pgd_clear(pgd_t *pgd) {
+#ifdef CONFIG_64BIT
+	if(pgd_flag(*pgd) & PxD_FLAG_ATTACHED)
+		/* This is the permanent pmd attached to the pgd; cannot
+		 * free it */
+		return;
+#endif
+	__pgd_val_set(*pgd, 0);
+}
+#else
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+extern inline int pgd_none(pgd_t pgd)		{ return 0; }
+extern inline int pgd_bad(pgd_t pgd)		{ return 0; }
+extern inline int pgd_present(pgd_t pgd)	{ return 1; }
+extern inline void pgd_clear(pgd_t * pgdp)	{ }
+#endif
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+extern inline int pte_read(pte_t pte)		{ return pte_val(pte) & _PAGE_READ; }
+extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+extern inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
+extern inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+extern inline int pte_user(pte_t pte) 		{ return pte_val(pte) & _PAGE_USER; }
+
+extern inline pte_t pte_rdprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_READ; return pte; }
+extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; return pte; }
+extern inline pte_t pte_mkread(pte_t pte)	{ pte_val(pte) |= _PAGE_READ; return pte; }
+extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define __mk_pte(addr,pgprot) \
+({									\
+	pte_t __pte;							\
+									\
+	pte_val(__pte) = ((addr)+pgprot_val(pgprot));			\
+									\
+	__pte;								\
+})
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = (pfn << PAGE_SHIFT) | pgprot_val(pgprot);
+	return pte;
+}
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+
+/* Permanent address of a page.  On parisc we don't have highmem. */
+
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+
+#define pmd_page_kernel(pmd)	((unsigned long) __va(pmd_address(pmd)))
+
+#define __pmd_page(pmd) ((unsigned long) __va(pmd_address(pmd)))
+#define pmd_page(pmd)	virt_to_page((void *)__pmd_page(pmd))
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) \
+((mm)->pgd + ((address) >> PGDIR_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+
+#if PT_NLEVELS == 3
+#define pmd_offset(dir,address) \
+((pmd_t *) pgd_page(*(dir)) + (((address)>>PMD_SHIFT) & (PTRS_PER_PMD-1)))
+#else
+#define pmd_offset(dir,addr) ((pmd_t *) dir)
+#endif
+
+/* Find an entry in the third-level page table.. */ 
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) \
+	((pte_t *) pmd_page_kernel(*(pmd)) + pte_index(address))
+#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+extern void paging_init (void);
+
+/* Used for deferring calls to flush_dcache_page() */
+
+#define PG_dcache_dirty         PG_arch_1
+
+struct vm_area_struct; /* forward declaration (include/linux/mm.h) */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+
+#define __swp_type(x)                     ((x).val & 0x1f)
+#define __swp_offset(x)                   ( (((x).val >> 6) &  0x7) | \
+					  (((x).val >> 8) & ~0x7) )
+#define __swp_entry(type, offset)         ((swp_entry_t) { (type) | \
+					    ((offset &  0x7) << 6) | \
+					    ((offset & ~0x7) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(xlate_pabit(_PAGE_ACCESSED_BIT), &pte_val(*ptep));
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(xlate_pabit(_PAGE_DIRTY_BIT), &pte_val(*ptep));
+#else
+	pte_t pte = *ptep;
+	if (!pte_dirty(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkclean(pte));
+	return 1;
+#endif
+}
+
+extern spinlock_t pa_dbit_lock;
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t old_pte;
+	pte_t pte;
+
+	spin_lock(&pa_dbit_lock);
+	pte = old_pte = *ptep;
+	pte_val(pte) &= ~_PAGE_PRESENT;
+	pte_val(pte) |= _PAGE_FLUSH;
+	set_pte_at(mm,addr,ptep,pte);
+	spin_unlock(&pa_dbit_lock);
+
+	return old_pte;
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+#define pte_same(A,B)	(pte_val(A) == pte_val(B))
+
+#endif /* !__ASSEMBLY__ */
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/* We provide our own get_unmapped_area to provide cache coherency */
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* _PARISC_PGTABLE_H */
diff --git a/include/asm-parisc/poll.h b/include/asm-parisc/poll.h
new file mode 100644
index 000000000000..1c1da86934cf
--- /dev/null
+++ b/include/asm-parisc/poll.h
@@ -0,0 +1,26 @@
+#ifndef __PARISC_POLL_H
+#define __PARISC_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-parisc/posix_types.h b/include/asm-parisc/posix_types.h
new file mode 100644
index 000000000000..9b19970de619
--- /dev/null
+++ b/include/asm-parisc/posix_types.h
@@ -0,0 +1,133 @@
+#ifndef __ARCH_PARISC_POSIX_TYPES_H
+#define __ARCH_PARISC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned int		__kernel_uid_t;
+typedef unsigned int		__kernel_gid_t;
+typedef int			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+/* Note these change from narrow to wide kernels */
+#ifdef __LP64__
+typedef unsigned long		__kernel_size_t;
+typedef long			__kernel_ssize_t;
+typedef long			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+#else
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+#endif
+typedef char *			__kernel_caddr_t;
+
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+typedef long long		__kernel_off64_t;
+typedef unsigned long long	__kernel_ino64_t;
+#endif
+
+typedef unsigned int		__kernel_old_dev_t;
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+/* compatibility stuff */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{ 
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h
new file mode 100644
index 000000000000..0b61f51d8467
--- /dev/null
+++ b/include/asm-parisc/processor.h
@@ -0,0 +1,344 @@
+/*
+ * include/asm-parisc/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ * Copyright (C) 2001 Grant Grundler
+ */
+
+#ifndef __ASM_PARISC_PROCESSOR_H
+#define __ASM_PARISC_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/threads.h>
+
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/pdc.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/system.h>
+#endif /* __ASSEMBLY__ */
+
+#define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+
+/* We cannot use MFIA as it was added for PA2.0 - prumpf
+
+   At one point there were no "0f/0b" type local symbols in gas for
+   PA-RISC.  This is no longer true, but this still seems like the
+   nicest way to implement this. */
+
+#define current_text_addr() ({ void *pc; __asm__("\n\tblr 0,%0\n\tnop":"=r" (pc)); pc; })
+
+#define TASK_SIZE               (current->thread.task_size)
+#define TASK_UNMAPPED_BASE      (current->thread.map_base)
+
+#define DEFAULT_TASK_SIZE32	(0xFFF00000UL)
+#define DEFAULT_MAP_BASE32	(0x40000000UL)
+
+#ifdef __LP64__
+#define DEFAULT_TASK_SIZE       (MAX_ADDRESS-0xf000000)
+#define DEFAULT_MAP_BASE        (0x200000000UL)
+#else
+#define DEFAULT_TASK_SIZE	DEFAULT_TASK_SIZE32
+#define DEFAULT_MAP_BASE	DEFAULT_MAP_BASE32
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Data detected about CPUs at boot time which is the same for all CPU's.
+ * HP boxes are SMP - ie identical processors.
+ *
+ * FIXME: some CPU rev info may be processor specific...
+ */
+struct system_cpuinfo_parisc {
+	unsigned int	cpu_count;
+	unsigned int	cpu_hz;
+	unsigned int	hversion;
+	unsigned int	sversion;
+	enum cpu_type	cpu_type;
+
+	struct {
+		struct pdc_model model;
+		unsigned long versions;
+		unsigned long cpuid;
+		unsigned long capabilities;
+		char   sys_model_name[81]; /* PDC-ROM returnes this model name */
+	} pdc;
+
+	char		*cpu_name;	/* e.g. "PA7300LC (PCX-L2)" */
+	char		*family_name;	/* e.g. "1.1e" */
+};
+
+
+/* Per CPU data structure - ie varies per CPU.  */
+struct cpuinfo_parisc {
+	unsigned long it_value;     /* Interval Timer at last timer Intr */
+	unsigned long it_delta;     /* Interval delta (tic_10ms / HZ * 100) */
+	unsigned long irq_count;    /* number of IRQ's since boot */
+	unsigned long irq_max_cr16; /* longest time to handle a single IRQ */
+	unsigned long cpuid;        /* aka slot_number or set to NO_PROC_ID */
+	unsigned long hpa;          /* Host Physical address */
+	unsigned long txn_addr;     /* MMIO addr of EIR or id_eid */
+#ifdef CONFIG_SMP
+	spinlock_t lock;            /* synchronization for ipi's */
+	unsigned long pending_ipi;  /* bitmap of type ipi_message_type */
+	unsigned long ipi_count;    /* number ipi Interrupts */
+#endif
+	unsigned long bh_count;     /* number of times bh was invoked */
+	unsigned long prof_counter; /* per CPU profiling support */
+	unsigned long prof_multiplier;	/* per CPU profiling support */
+	unsigned long fp_rev;
+	unsigned long fp_model;
+	unsigned int state;
+	struct parisc_device *dev;
+	unsigned long loops_per_jiffy;
+};
+
+extern struct system_cpuinfo_parisc boot_cpu_data;
+extern struct cpuinfo_parisc cpu_data[NR_CPUS];
+#define current_cpu_data cpu_data[smp_processor_id()]
+
+#define CPU_HVERSION ((boot_cpu_data.hversion >> 4) & 0x0FFF)
+
+typedef struct {
+	int seg;  
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN	8
+
+struct thread_struct {
+	struct pt_regs regs;
+	unsigned long  task_size;
+	unsigned long  map_base;
+	unsigned long  flags;
+}; 
+
+/* Thread struct flags. */
+#define PARISC_KERNEL_DEATH	(1UL << 31)	/* see die_if_kernel()... */
+
+#define INIT_THREAD { \
+	regs:	{	gr: { 0, }, \
+			fr: { 0, }, \
+			sr: { 0, }, \
+			iasq: { 0, }, \
+			iaoq: { 0, }, \
+			cr27: 0, \
+		}, \
+	task_size:      DEFAULT_TASK_SIZE, \
+	map_base:       DEFAULT_MAP_BASE, \
+	flags:          0 \
+	}
+
+/*
+ * Return saved PC of a blocked thread.  This is used by ps mostly.
+ */
+
+unsigned long thread_saved_pc(struct task_struct *t);
+void show_trace(struct task_struct *task, unsigned long *stack);
+
+/*
+ * Start user thread in another space.
+ *
+ * Note that we set both the iaoq and r31 to the new pc. When
+ * the kernel initially calls execve it will return through an
+ * rfi path that will use the values in the iaoq. The execve
+ * syscall path will return through the gateway page, and
+ * that uses r31 to branch to.
+ *
+ * For ELF we clear r23, because the dynamic linker uses it to pass
+ * the address of the finalizer function.
+ *
+ * We also initialize sr3 to an illegal value (illegal for our
+ * implementation, not for the architecture).
+ */
+typedef unsigned int elf_caddr_t;
+
+#define start_thread_som(regs, new_pc, new_sp) do {	\
+	unsigned long *sp = (unsigned long *)new_sp;	\
+	__u32 spaceid = (__u32)current->mm->context;	\
+	unsigned long pc = (unsigned long)new_pc;	\
+	/* offset pc for priv. level */			\
+	pc |= 3;					\
+							\
+	set_fs(USER_DS);				\
+	regs->iasq[0] = spaceid;			\
+	regs->iasq[1] = spaceid;			\
+	regs->iaoq[0] = pc;				\
+	regs->iaoq[1] = pc + 4;                         \
+	regs->sr[2] = LINUX_GATEWAY_SPACE;              \
+	regs->sr[3] = 0xffff;				\
+	regs->sr[4] = spaceid;				\
+	regs->sr[5] = spaceid;				\
+	regs->sr[6] = spaceid;				\
+	regs->sr[7] = spaceid;				\
+	regs->gr[ 0] = USER_PSW;                        \
+	regs->gr[30] = ((new_sp)+63)&~63;		\
+	regs->gr[31] = pc;				\
+							\
+	get_user(regs->gr[26],&sp[0]);			\
+	get_user(regs->gr[25],&sp[-1]); 		\
+	get_user(regs->gr[24],&sp[-2]); 		\
+	get_user(regs->gr[23],&sp[-3]); 		\
+} while(0)
+
+/* The ELF abi wants things done a "wee bit" differently than
+ * som does.  Supporting this behavior here avoids
+ * having our own version of create_elf_tables.
+ *
+ * Oh, and yes, that is not a typo, we are really passing argc in r25
+ * and argv in r24 (rather than r26 and r25).  This is because that's
+ * where __libc_start_main wants them.
+ *
+ * Duplicated from dl-machine.h for the benefit of readers:
+ *
+ *  Our initial stack layout is rather different from everyone else's
+ *  due to the unique PA-RISC ABI.  As far as I know it looks like
+ *  this:
+
+   -----------------------------------  (user startup code creates this frame)
+   |         32 bytes of magic       |
+   |---------------------------------|
+   | 32 bytes argument/sp save area  |
+   |---------------------------------| (bprm->p)
+   |	    ELF auxiliary info	     |
+   |         (up to 28 words)        |
+   |---------------------------------|
+   |		   NULL		     |
+   |---------------------------------|
+   |	   Environment pointers	     |
+   |---------------------------------|
+   |		   NULL		     |
+   |---------------------------------|
+   |        Argument pointers        |
+   |---------------------------------| <- argv
+   |          argc (1 word)          |
+   |---------------------------------| <- bprm->exec (HACK!)
+   |         N bytes of slack        |
+   |---------------------------------|
+   |	filename passed to execve    |
+   |---------------------------------| (mm->env_end)
+   |           env strings           |
+   |---------------------------------| (mm->env_start, mm->arg_end)
+   |           arg strings           |
+   |---------------------------------|
+   | additional faked arg strings if |
+   | we're invoked via binfmt_script |
+   |---------------------------------| (mm->arg_start)
+   stack base is at TASK_SIZE - rlim_max.
+
+on downward growing arches, it looks like this:
+   stack base at TASK_SIZE
+   | filename passed to execve
+   | env strings
+   | arg strings
+   | faked arg strings
+   | slack
+   | ELF
+   | envps
+   | argvs
+   | argc
+
+ *  The pleasant part of this is that if we need to skip arguments we
+ *  can just decrement argc and move argv, because the stack pointer
+ *  is utterly unrelated to the location of the environment and
+ *  argument vectors.
+ *
+ * Note that the S/390 people took the easy way out and hacked their
+ * GCC to make the stack grow downwards.
+ *
+ * Final Note: For entry from syscall, the W (wide) bit of the PSW
+ * is stuffed into the lowest bit of the user sp (%r30), so we fill
+ * it in here from the current->personality
+ */
+
+#ifdef __LP64__
+#define USER_WIDE_MODE	(personality(current->personality) == PER_LINUX)
+#else
+#define USER_WIDE_MODE	0
+#endif
+
+#define start_thread(regs, new_pc, new_sp) do {		\
+	elf_addr_t *sp = (elf_addr_t *)new_sp;		\
+	__u32 spaceid = (__u32)current->mm->context;	\
+	elf_addr_t pc = (elf_addr_t)new_pc | 3;		\
+	elf_caddr_t *argv = (elf_caddr_t *)bprm->exec + 1;	\
+							\
+	set_fs(USER_DS);				\
+	regs->iasq[0] = spaceid;			\
+	regs->iasq[1] = spaceid;			\
+	regs->iaoq[0] = pc;				\
+	regs->iaoq[1] = pc + 4;                         \
+	regs->sr[2] = LINUX_GATEWAY_SPACE;              \
+	regs->sr[3] = 0xffff;				\
+	regs->sr[4] = spaceid;				\
+	regs->sr[5] = spaceid;				\
+	regs->sr[6] = spaceid;				\
+	regs->sr[7] = spaceid;				\
+	regs->gr[ 0] = USER_PSW | (USER_WIDE_MODE ? PSW_W : 0); \
+	regs->fr[ 0] = 0LL;                            	\
+	regs->fr[ 1] = 0LL;                            	\
+	regs->fr[ 2] = 0LL;                            	\
+	regs->fr[ 3] = 0LL;                            	\
+	regs->gr[30] = (((unsigned long)sp + 63) &~ 63) | (USER_WIDE_MODE ? 1 : 0); \
+	regs->gr[31] = pc;				\
+							\
+	get_user(regs->gr[25], (argv - 1));		\
+	regs->gr[24] = (long) argv;			\
+	regs->gr[23] = 0;				\
+} while(0)
+
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern void map_hpux_gateway_page(struct task_struct *tsk, struct mm_struct *mm);
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)	((tsk)->thread.regs.iaoq[0])
+#define KSTK_ESP(tsk)	((tsk)->thread.regs.gr[30])
+
+
+/*
+ * PA 2.0 defines data prefetch instructions on page 6-11 of the Kane book.
+ * In addition, many implementations do hardware prefetching of both
+ * instructions and data.
+ *
+ * PA7300LC (page 14-4 of the ERS) also implements prefetching by a load
+ * to gr0 but not in a way that Linux can use.  If the load would cause an
+ * interruption (eg due to prefetching 0), it is suppressed on PA2.0
+ * processors, but not on 7300LC.
+ */
+#ifdef  CONFIG_PREFETCH
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+extern inline void prefetch(const void *addr)
+{
+	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
+}
+
+extern inline void prefetchw(const void *addr)
+{
+	__asm__("ldd 0(%0), %%r0" : : "r" (addr));
+}
+#endif
+
+#define cpu_relax()	barrier()
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_PARISC_PROCESSOR_H */
diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h
new file mode 100644
index 000000000000..51323029f377
--- /dev/null
+++ b/include/asm-parisc/psw.h
@@ -0,0 +1,62 @@
+#ifndef _PARISC_PSW_H
+#define	PSW_I	0x00000001
+#define	PSW_D	0x00000002
+#define	PSW_P	0x00000004
+#define	PSW_Q	0x00000008
+
+#define	PSW_R	0x00000010
+#define	PSW_F	0x00000020
+#define	PSW_G	0x00000040	/* PA1.x only */
+#define PSW_O	0x00000080	/* PA2.0 only */
+
+#define PSW_CB	0x0000ff00
+
+#define	PSW_M	0x00010000
+#define	PSW_V	0x00020000
+#define	PSW_C	0x00040000
+#define	PSW_B	0x00080000
+
+#define	PSW_X	0x00100000
+#define	PSW_N	0x00200000
+#define	PSW_L	0x00400000
+#define	PSW_H	0x00800000
+
+#define	PSW_T	0x01000000
+#define	PSW_S	0x02000000
+#define	PSW_E	0x04000000
+#define PSW_W	0x08000000	/* PA2.0 only */
+#define PSW_W_BIT       36      /* PA2.0 only */
+
+#define	PSW_Z	0x40000000	/* PA1.x only */
+#define	PSW_Y	0x80000000	/* PA1.x only */
+
+#ifdef __LP64__
+#define PSW_HI_CB 0x000000ff    /* PA2.0 only */
+#endif
+
+/* PSW bits to be used with ssm/rsm */
+#define PSW_SM_I        0x1
+#define PSW_SM_D        0x2
+#define PSW_SM_P        0x4
+#define PSW_SM_Q        0x8
+#define PSW_SM_R        0x10
+#define PSW_SM_F        0x20
+#define PSW_SM_G        0x40
+#define PSW_SM_O        0x80
+#define PSW_SM_E        0x100
+#define PSW_SM_W        0x200
+
+#ifdef __LP64__
+#  define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+#  define KERNEL_PSW    (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D)
+#  define REAL_MODE_PSW (PSW_W | PSW_Q)
+#  define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#  define USER_PSW_HI_MASK (PSW_HI_CB)
+#else
+#  define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+#  define KERNEL_PSW    (PSW_C | PSW_Q | PSW_P | PSW_D)
+#  define REAL_MODE_PSW (PSW_Q)
+#  define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#endif
+
+#endif
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
new file mode 100644
index 000000000000..3f428aa371a4
--- /dev/null
+++ b/include/asm-parisc/ptrace.h
@@ -0,0 +1,56 @@
+#ifndef _PARISC_PTRACE_H
+#define _PARISC_PTRACE_H
+
+/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg
+** Copyright (C) 2000 Grant Grundler, Hewlett-Packard
+*/
+
+#include <linux/types.h>
+
+/* This struct defines the way the registers are stored on the 
+ * stack during a system call.
+ *
+ * N.B. gdb/strace care about the size and offsets within this
+ * structure. If you change things, you may break object compatibility
+ * for those applications.
+ */
+
+struct pt_regs {
+	unsigned long gr[32];	/* PSW is in gr[0] */
+	__u64 fr[32];
+	unsigned long sr[ 8];
+	unsigned long iasq[2];
+	unsigned long iaoq[2];
+	unsigned long cr27;
+	unsigned long pad0;     /* available for other uses */
+	unsigned long orig_r28;
+	unsigned long ksp;
+	unsigned long kpc;
+	unsigned long sar;	/* CR11 */
+	unsigned long iir;	/* CR19 */
+	unsigned long isr;	/* CR20 */
+	unsigned long ior;	/* CR21 */
+	unsigned long ipsw;	/* CR22 */
+};
+
+#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ *
+ * These ones are taken from IA-64 on the assumption that theirs are
+ * the most correct (and we also want to support PTRACE_SINGLEBLOCK
+ * since we have taken branch traps too)
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#ifdef __KERNEL__
+
+/* XXX should we use iaoq[1] or iaoq[0] ? */
+#define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
+#define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
+#define instruction_pointer(regs)	((regs)->iaoq[0] & ~3)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#endif
diff --git a/include/asm-parisc/real.h b/include/asm-parisc/real.h
new file mode 100644
index 000000000000..82acb25db395
--- /dev/null
+++ b/include/asm-parisc/real.h
@@ -0,0 +1,5 @@
+#ifndef _PARISC_REAL_H
+#define _PARISC_REAL_H
+
+
+#endif
diff --git a/include/asm-parisc/resource.h b/include/asm-parisc/resource.h
new file mode 100644
index 000000000000..8b06343b62ed
--- /dev/null
+++ b/include/asm-parisc/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_PARISC_RESOURCE_H
+#define _ASM_PARISC_RESOURCE_H
+
+#define _STK_LIM_MAX	10 * _STK_LIM
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-parisc/rt_sigframe.h b/include/asm-parisc/rt_sigframe.h
new file mode 100644
index 000000000000..5623c032b64c
--- /dev/null
+++ b/include/asm-parisc/rt_sigframe.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_PARISC_RT_SIGFRAME_H
+#define _ASM_PARISC_RT_SIGFRAME_H
+
+#ifdef CONFIG_COMPAT
+#include <asm/compat_rt_sigframe.h>
+#endif
+
+#define SIGRETURN_TRAMP 4
+#define SIGRESTARTBLOCK_TRAMP 5 
+#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
+
+struct rt_sigframe {
+	/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c 
+	        Secondary to that it must protect the ERESTART_RESTARTBLOCK
+		trampoline we left on the stack (we were bad and didn't 
+		change sp so we could run really fast.) */
+	unsigned int tramp[TRAMP_SIZE];
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+#define	SIGFRAME		128
+#define FUNCTIONCALLFRAME	96
+#define PARISC_RT_SIGFRAME_SIZE					\
+	(((sizeof(struct rt_sigframe) + FUNCTIONCALLFRAME) + SIGFRAME) & -SIGFRAME)
+
+#endif
diff --git a/include/asm-parisc/rtc.h b/include/asm-parisc/rtc.h
new file mode 100644
index 000000000000..f3d3d6b110ba
--- /dev/null
+++ b/include/asm-parisc/rtc.h
@@ -0,0 +1,131 @@
+/* 
+ * inclue/asm-parisc/rtc.h
+ *
+ * Copyright 2002 Randolph CHung <tausq@debian.org>
+ *
+ * Based on: include/asm-ppc/rtc.h and the genrtc driver in the
+ * 2.4 parisc linux tree
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/pdc.h>
+
+#define SECS_PER_HOUR   (60 * 60)
+#define SECS_PER_DAY    (SECS_PER_HOUR * 24)
+
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+#define RTC_BATT_BAD 0x100	/* battery bad */
+
+/* some dummy definitions */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+# define __isleap(year) \
+  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* How many days come before each month (0-12).  */
+static const unsigned short int __mon_yday[2][13] =
+{
+	/* Normal years.  */
+	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+	/* Leap years.  */
+	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+};
+
+static inline unsigned int get_rtc_time(struct rtc_time *wtime)
+{
+	struct pdc_tod tod_data;
+	long int days, rem, y;
+	const unsigned short int *ip;
+
+	if(pdc_tod_read(&tod_data) < 0)
+		return RTC_24H | RTC_BATT_BAD;
+
+
+	// most of the remainder of this function is:
+//	Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
+//	This was originally a part of the GNU C Library.
+//      It is distributed under the GPL, and was swiped from offtime.c
+
+
+	days = tod_data.tod_sec / SECS_PER_DAY;
+	rem = tod_data.tod_sec % SECS_PER_DAY;
+
+	wtime->tm_hour = rem / SECS_PER_HOUR;
+	rem %= SECS_PER_HOUR;
+	wtime->tm_min = rem / 60;
+	wtime->tm_sec = rem % 60;
+
+	y = 1970;
+
+#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
+#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
+
+	while (days < 0 || days >= (__isleap (y) ? 366 : 365))
+	{
+		/* Guess a corrected year, assuming 365 days per year.  */
+		long int yg = y + days / 365 - (days % 365 < 0);
+
+		/* Adjust DAYS and Y to match the guessed year.  */
+		days -= ((yg - y) * 365
+			 + LEAPS_THRU_END_OF (yg - 1)
+			 - LEAPS_THRU_END_OF (y - 1));
+		y = yg;
+	}
+	wtime->tm_year = y - 1900;
+
+	ip = __mon_yday[__isleap(y)];
+	for (y = 11; days < (long int) ip[y]; --y)
+		continue;
+	days -= ip[y];
+	wtime->tm_mon = y;
+	wtime->tm_mday = days + 1;
+
+	return RTC_24H;
+}
+
+static int set_rtc_time(struct rtc_time *wtime)
+{
+	u_int32_t secs;
+
+	secs = mktime(wtime->tm_year + 1900, wtime->tm_mon + 1, wtime->tm_mday, 
+		      wtime->tm_hour, wtime->tm_min, wtime->tm_sec);
+
+	if(pdc_tod_set(secs, 0) < 0)
+		return -1;
+	else
+		return 0;
+
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-parisc/runway.h b/include/asm-parisc/runway.h
new file mode 100644
index 000000000000..5bea02da7e22
--- /dev/null
+++ b/include/asm-parisc/runway.h
@@ -0,0 +1,12 @@
+#ifndef ASM_PARISC_RUNWAY_H
+#define ASM_PARISC_RUNWAY_H
+#ifdef __KERNEL__
+
+/* declared in arch/parisc/kernel/setup.c */
+extern struct proc_dir_entry * proc_runway_root;
+
+#define RUNWAY_STATUS	0x10
+#define RUNWAY_DEBUG	0x40
+
+#endif /* __KERNEL__ */
+#endif /* ASM_PARISC_RUNWAY_H */
diff --git a/include/asm-parisc/scatterlist.h b/include/asm-parisc/scatterlist.h
new file mode 100644
index 000000000000..236c1d0fba33
--- /dev/null
+++ b/include/asm-parisc/scatterlist.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_PARISC_SCATTERLIST_H
+#define _ASM_PARISC_SCATTERLIST_H
+
+#include <asm/page.h>
+
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+
+	unsigned int length;
+
+	/* an IOVA can be 64-bits on some PA-Risc platforms. */
+	dma_addr_t iova;	/* I/O Virtual Address */
+	__u32      iova_length; /* bytes mapped */
+};
+
+#define sg_virt_addr(sg) ((unsigned long)(page_address(sg->page) + sg->offset))
+#define sg_dma_address(sg) ((sg)->iova)
+#define sg_dma_len(sg)     ((sg)->iova_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* _ASM_PARISC_SCATTERLIST_H */
diff --git a/include/asm-parisc/sections.h b/include/asm-parisc/sections.h
new file mode 100644
index 000000000000..fdd43ec42ec5
--- /dev/null
+++ b/include/asm-parisc/sections.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_SECTIONS_H
+#define _PARISC_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-parisc/segment.h b/include/asm-parisc/segment.h
new file mode 100644
index 000000000000..26794ddb6524
--- /dev/null
+++ b/include/asm-parisc/segment.h
@@ -0,0 +1,6 @@
+#ifndef __PARISC_SEGMENT_H
+#define __PARISC_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/include/asm-parisc/semaphore-helper.h b/include/asm-parisc/semaphore-helper.h
new file mode 100644
index 000000000000..387f7c1277a2
--- /dev/null
+++ b/include/asm-parisc/semaphore-helper.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_PARISC_SEMAPHORE_HELPER_H
+#define _ASM_PARISC_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ * (C) Copyright 1999 Andrea Arcangeli
+ */
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ *
+ * This is trivially done with load_locked/store_cond,
+ * which we have.  Let the rest of the losers suck eggs.
+ */
+static __inline__ void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc((atomic_t *)&sem->waking);
+}
+
+static __inline__ int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking > 0) {
+		sem->waking--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ *
+ * We must undo the sem->count down_trylock() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 1;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->waking <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->waking--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif /* _ASM_PARISC_SEMAPHORE_HELPER_H */
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
new file mode 100644
index 000000000000..f78bb2e34538
--- /dev/null
+++ b/include/asm-parisc/semaphore.h
@@ -0,0 +1,147 @@
+/*    SMP- and interrupt-safe semaphores.
+ *    PA-RISC version by Matthew Wilcox
+ *
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 1996 Linus Torvalds
+ *    Copyright (C) 1999-2001 Matthew Wilcox < willy at debian d0T org >
+ *    Copyright (C) 2000 Grant Grundler < grundler a debian org >
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_PARISC_SEMAPHORE_H
+#define _ASM_PARISC_SEMAPHORE_H
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+
+/*
+ * The `count' is initialised to the number of people who are allowed to
+ * take the lock.  (Normally we want a mutex, so this is `1').  if
+ * `count' is positive, the lock can be taken.  if it's 0, no-one is
+ * waiting on it.  if it's -1, at least one task is waiting.
+ */
+struct semaphore {
+	spinlock_t	sentry;
+	int		count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.sentry		= SPIN_LOCK_UNLOCKED,				\
+	.count		= n,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+extern inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+static inline int sem_getcount(struct semaphore *sem)
+{
+	return sem->count;
+}
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+/* Semaphores can be `tried' from irq context.  So we have to disable
+ * interrupts while we're messing with the semaphore.  Sorry.
+ */
+
+extern __inline__ void down(struct semaphore * sem)
+{
+	might_sleep();
+	spin_lock_irq(&sem->sentry);
+	if (sem->count > 0) {
+		sem->count--;
+	} else {
+		__down(sem);
+	}
+	spin_unlock_irq(&sem->sentry);
+}
+
+extern __inline__ int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+	might_sleep();
+	spin_lock_irq(&sem->sentry);
+	if (sem->count > 0) {
+		sem->count--;
+	} else {
+		ret = __down_interruptible(sem);
+	}
+	spin_unlock_irq(&sem->sentry);
+	return ret;
+}
+
+/*
+ * down_trylock returns 0 on success, 1 if we failed to get the lock.
+ * May not sleep, but must preserve irq state
+ */
+extern __inline__ int down_trylock(struct semaphore * sem)
+{
+	int flags, count;
+
+	spin_lock_irqsave(&sem->sentry, flags);
+	count = sem->count - 1;
+	if (count >= 0)
+		sem->count = count;
+	spin_unlock_irqrestore(&sem->sentry, flags);
+	return (count < 0);
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ */
+extern __inline__ void up(struct semaphore * sem)
+{
+	int flags;
+	spin_lock_irqsave(&sem->sentry, flags);
+	if (sem->count < 0) {
+		__up(sem);
+	} else {
+		sem->count++;
+	}
+	spin_unlock_irqrestore(&sem->sentry, flags);
+}
+
+#endif /* _ASM_PARISC_SEMAPHORE_H */
diff --git a/include/asm-parisc/sembuf.h b/include/asm-parisc/sembuf.h
new file mode 100644
index 000000000000..1083368ef8db
--- /dev/null
+++ b/include/asm-parisc/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _PARISC_SEMBUF_H
+#define _PARISC_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+#ifndef __LP64__
+	unsigned int	__pad1;
+#endif
+	__kernel_time_t	sem_otime;		/* last semop time */
+#ifndef __LP64__
+	unsigned int	__pad2;
+#endif
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned int	sem_nsems;		/* no. of semaphores in array */
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _PARISC_SEMBUF_H */
diff --git a/include/asm-parisc/serial.h b/include/asm-parisc/serial.h
new file mode 100644
index 000000000000..239c5dcab7e6
--- /dev/null
+++ b/include/asm-parisc/serial.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-parisc/serial.h
+ */
+
+/*
+ * This assumes you have a 7.272727 MHz clock for your UART.
+ * The documentation implies a 40Mhz clock, and elsewhere a 7Mhz clock
+ * Clarified: 7.2727MHz on LASI. Not yet clarified for DINO
+ */
+
+#define LASI_BASE_BAUD ( 7272727 / 16 )
+#define BASE_BAUD  LASI_BASE_BAUD
+
+/*
+ * We don't use the ISA probing code, so these entries are just to reserve
+ * space.  Some example (maximal) configurations:
+ * - 712 w/ additional Lasi & RJ16 ports: 4
+ * - J5k w/ PCI serial cards: 2 + 4 * card ~= 34
+ * A500 w/ PCI serial cards: 5 + 4 * card ~= 17
+ */
+ 
+#define STD_SERIAL_PORT_DEFNS			\
+	{ 0, },		/* ttyS0 */	\
+	{ 0, },		/* ttyS1 */	\
+	{ 0, },		/* ttyS2 */	\
+	{ 0, },		/* ttyS3 */	\
+	{ 0, },		/* ttyS4 */	\
+	{ 0, },		/* ttyS5 */	\
+	{ 0, },		/* ttyS6 */	\
+	{ 0, },		/* ttyS7 */	\
+	{ 0, },		/* ttyS8 */
+
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS
+
diff --git a/include/asm-parisc/setup.h b/include/asm-parisc/setup.h
new file mode 100644
index 000000000000..7da2e5b8747e
--- /dev/null
+++ b/include/asm-parisc/setup.h
@@ -0,0 +1,6 @@
+#ifndef _PARISC_SETUP_H
+#define _PARISC_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#endif /* _PARISC_SETUP_H */
diff --git a/include/asm-parisc/shmbuf.h b/include/asm-parisc/shmbuf.h
new file mode 100644
index 000000000000..623b6c0c49e6
--- /dev/null
+++ b/include/asm-parisc/shmbuf.h
@@ -0,0 +1,58 @@
+#ifndef _PARISC_SHMBUF_H
+#define _PARISC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+#ifndef __LP64__
+	unsigned int		__pad1;
+#endif
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __LP64__
+	unsigned int		__pad2;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __LP64__
+	unsigned int		__pad3;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __LP64__
+	unsigned int		__pad4;
+#endif
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned int		shm_nattch;	/* no. of current attaches */
+	unsigned int		__unused1;
+	unsigned int		__unused2;
+};
+
+#ifdef __LP64__
+/* The 'unsigned int' (formerly 'unsigned long') data types below will
+ * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
+ * a wide kernel, but if some of these values are meant to contain pointers
+ * they may need to be 'long long' instead. -PB XXX FIXME
+ */
+#endif
+struct shminfo64 {
+	unsigned int	shmmax;
+	unsigned int	shmmin;
+	unsigned int	shmmni;
+	unsigned int	shmseg;
+	unsigned int	shmall;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+	unsigned int	__unused3;
+	unsigned int	__unused4;
+};
+
+#endif /* _PARISC_SHMBUF_H */
diff --git a/include/asm-parisc/shmparam.h b/include/asm-parisc/shmparam.h
new file mode 100644
index 000000000000..628ddc22faa8
--- /dev/null
+++ b/include/asm-parisc/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef _ASMPARISC_SHMPARAM_H
+#define _ASMPARISC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+#define SHMLBA 0x00400000   /* attach addr needs to be 4 Mb aligned */
+
+#endif /* _ASMPARISC_SHMPARAM_H */
diff --git a/include/asm-parisc/sigcontext.h b/include/asm-parisc/sigcontext.h
new file mode 100644
index 000000000000..27ef31bb3b6e
--- /dev/null
+++ b/include/asm-parisc/sigcontext.h
@@ -0,0 +1,20 @@
+#ifndef _ASMPARISC_SIGCONTEXT_H
+#define _ASMPARISC_SIGCONTEXT_H
+
+#define PARISC_SC_FLAG_ONSTACK 1<<0
+#define PARISC_SC_FLAG_IN_SYSCALL 1<<1
+
+/* We will add more stuff here as it becomes necessary, until we know
+   it works. */
+struct sigcontext {
+	unsigned long sc_flags;
+
+	unsigned long sc_gr[32]; /* PSW in sc_gr[0] */
+	unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */
+	unsigned long sc_iasq[2];
+	unsigned long sc_iaoq[2];
+	unsigned long sc_sar; /* cr11 */
+};
+
+
+#endif
diff --git a/include/asm-parisc/siginfo.h b/include/asm-parisc/siginfo.h
new file mode 100644
index 000000000000..d4909f55fe35
--- /dev/null
+++ b/include/asm-parisc/siginfo.h
@@ -0,0 +1,14 @@
+#ifndef _PARISC_SIGINFO_H
+#define _PARISC_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#endif
diff --git a/include/asm-parisc/signal.h b/include/asm-parisc/signal.h
new file mode 100644
index 000000000000..358f577c8eb8
--- /dev/null
+++ b/include/asm-parisc/signal.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_PARISC_SIGNAL_H
+#define _ASM_PARISC_SIGNAL_H
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGEMT		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGBUS		10
+#define SIGSEGV		11
+#define SIGSYS		12 /* Linux doesn't use this */
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGUSR1		16
+#define SIGUSR2		17
+#define SIGCHLD		18
+#define SIGPWR		19
+#define SIGVTALRM	20
+#define SIGPROF		21
+#define SIGIO		22
+#define SIGPOLL		SIGIO
+#define SIGWINCH	23
+#define SIGSTOP		24
+#define SIGTSTP		25
+#define SIGCONT		26
+#define SIGTTIN		27
+#define SIGTTOU		28
+#define SIGURG		29
+#define SIGLOST		30 /* Linux doesn't use this either */
+#define	SIGUNUSED	31
+#define SIGRESERVE	SIGUNUSED
+
+#define SIGXCPU		33
+#define SIGXFSZ		34
+#define SIGSTKFLT	36
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	37
+#define SIGRTMAX	_NSIG /* it's 44 under HP/UX */
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK	0x00000001
+#define SA_RESETHAND	0x00000004
+#define SA_NOCLDSTOP	0x00000008
+#define SA_SIGINFO	0x00000010
+#define SA_NODEFER	0x00000020
+#define SA_RESTART	0x00000040
+#define SA_NOCLDWAIT	0x00000080
+#define _SA_SIGGFAULT	0x00000100 /* HPUX */
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000 /* obsolete -- ignored */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+/* bits-per-word, where word apparently means 'long' not 'int' */
+#define _NSIG_BPW	BITS_PER_LONG
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+/* Type of a signal handler.  */
+#ifdef __LP64__
+/* function pointers on 64-bit parisc are pointers to little structs and the
+ * compiler doesn't support code which changes or tests the address of
+ * the function in the little struct.  This is really ugly -PB
+ */
+typedef char __user *__sighandler_t;
+#else
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+#endif
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	/* next_signal() assumes this is a long - no choice */
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#include <asm/sigcontext.h>
+
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY */
+#endif /* _ASM_PARISC_SIGNAL_H */
diff --git a/include/asm-parisc/smp.h b/include/asm-parisc/smp.h
new file mode 100644
index 000000000000..fde77ac35463
--- /dev/null
+++ b/include/asm-parisc/smp.h
@@ -0,0 +1,69 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SMP)
+
+/* Page Zero Location PDC will look for the address to branch to when we poke
+** slave CPUs still in "Icache loop".
+*/
+#define PDC_OS_BOOT_RENDEZVOUS     0x10
+#define PDC_OS_BOOT_RENDEZVOUS_HI  0x28
+
+#ifndef ASSEMBLY
+#include <linux/bitops.h>
+#include <linux/threads.h>	/* for NR_CPUS */
+#include <linux/cpumask.h>
+typedef unsigned long address_t;
+
+extern cpumask_t cpu_online_map;
+
+
+/*
+ *	Private routines/data
+ *
+ *	physical and logical are equivalent until we support CPU hotplug.
+ */
+#define cpu_number_map(cpu)	(cpu)
+#define cpu_logical_map(cpu)	(cpu)
+
+extern void smp_send_reschedule(int cpu);
+
+#endif /* !ASSEMBLY */
+
+/*
+ *	This magic constant controls our willingness to transfer
+ *      a process across CPUs. Such a transfer incurs cache and tlb
+ *      misses. The current value is inherited from i386. Still needs
+ *      to be tuned for parisc.
+ */
+ 
+#define PROC_CHANGE_PENALTY	15		/* Schedule penalty */
+
+#undef ENTRY_SYS_CPUS
+#ifdef ENTRY_SYS_CPUS
+#define STATE_RENDEZVOUS			0
+#define STATE_STOPPED 				1 
+#define STATE_RUNNING				2
+#define STATE_HALTED				3
+#endif
+
+extern unsigned long cpu_present_mask;
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+#endif /* CONFIG_SMP */
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+#define ANY_PROC_ID		0xFF		/* Any processor magic marker */
+static inline int __cpu_disable (void) {
+  return 0;
+}
+static inline void __cpu_die (unsigned int cpu) {
+  while(1)
+    ;
+}
+extern int __cpu_up (unsigned int cpu);
+
+#endif /*  __ASM_SMP_H */
diff --git a/include/asm-parisc/socket.h b/include/asm-parisc/socket.h
new file mode 100644
index 000000000000..4a77996c1862
--- /dev/null
+++ b/include/asm-parisc/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDLOWAT	0x1003
+#define SO_RCVLOWAT	0x1004
+#define SO_SNDTIMEO	0x1005
+#define SO_RCVTIMEO	0x1006
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+#define SO_PEERNAME	0x2000
+
+#define SO_NO_CHECK	0x400b
+#define SO_PRIORITY	0x400c
+#define SO_BSDCOMPAT	0x400e
+#define SO_PASSCRED	0x4010
+#define SO_PEERCRED	0x4011
+#define SO_TIMESTAMP	0x4012
+#define SCM_TIMESTAMP	SO_TIMESTAMP
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x4016
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x4017
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x4018
+
+#define SO_BINDTODEVICE	0x4019
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        0x401a
+#define SO_DETACH_FILTER        0x401b
+
+#define SO_ACCEPTCONN		0x401c
+
+#define SO_PEERSEC		0x401d
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-parisc/sockios.h b/include/asm-parisc/sockios.h
new file mode 100644
index 000000000000..aace49629949
--- /dev/null
+++ b/include/asm-parisc/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_PARISC_SOCKIOS__
+#define __ARCH_PARISC_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h
new file mode 100644
index 000000000000..679ea1c651ef
--- /dev/null
+++ b/include/asm-parisc/spinlock.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/system.h>
+
+/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked
+ * since it only has load-and-zero. Moreover, at least on some PA processors,
+ * the semaphore address has to be 16-byte aligned.
+ */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+#define __SPIN_LOCK_UNLOCKED	{ { 1, 1, 1, 1 } }
+#undef SPIN_LOCK_UNLOCKED
+#define SPIN_LOCK_UNLOCKED (spinlock_t) __SPIN_LOCK_UNLOCKED
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+static inline int spin_is_locked(spinlock_t *x)
+{
+	volatile unsigned int *a = __ldcw_align(x);
+	return *a == 0;
+}
+
+#define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+static inline void _raw_spin_lock(spinlock_t *x)
+{
+	volatile unsigned int *a;
+
+	mb();
+	a = __ldcw_align(x);
+	while (__ldcw(a) == 0)
+		while (*a == 0);
+	mb();
+}
+
+static inline void _raw_spin_unlock(spinlock_t *x)
+{
+	volatile unsigned int *a;
+	mb();
+	a = __ldcw_align(x);
+	*a = 1;
+	mb();
+}
+
+static inline int _raw_spin_trylock(spinlock_t *x)
+{
+	volatile unsigned int *a;
+	int ret;
+
+	mb();
+	a = __ldcw_align(x);
+        ret = __ldcw(a) != 0;
+	mb();
+
+	return ret;
+}
+	
+#define spin_lock_own(LOCK, LOCATION)	((void)0)
+
+#else /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#define SPINLOCK_MAGIC	0x1D244B3C
+
+#define __SPIN_LOCK_UNLOCKED	{ { 1, 1, 1, 1 }, SPINLOCK_MAGIC, 10, __FILE__ , NULL, 0, -1, NULL, NULL }
+#undef SPIN_LOCK_UNLOCKED
+#define SPIN_LOCK_UNLOCKED (spinlock_t) __SPIN_LOCK_UNLOCKED
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+#define CHECK_LOCK(x)							\
+	do {								\
+	 	if (unlikely((x)->magic != SPINLOCK_MAGIC)) {			\
+			printk(KERN_ERR "%s:%d: spin_is_locked"		\
+			" on uninitialized spinlock %p.\n",		\
+				__FILE__, __LINE__, (x)); 		\
+		} 							\
+	} while(0)
+
+#define spin_is_locked(x)						\
+	({								\
+	 	CHECK_LOCK(x);						\
+		volatile unsigned int *a = __ldcw_align(x);		\
+		if (unlikely((*a == 0) && (x)->babble)) {				\
+			(x)->babble--;					\
+			printk("KERN_WARNING				\
+				%s:%d: spin_is_locked(%s/%p) already"	\
+				" locked by %s:%d in %s at %p(%d)\n",	\
+				__FILE__,__LINE__, (x)->module,	(x),	\
+				(x)->bfile, (x)->bline, (x)->task->comm,\
+				(x)->previous, (x)->oncpu);		\
+		}							\
+		*a == 0;						\
+	})
+
+#define spin_unlock_wait(x)						\
+	do {								\
+	 	CHECK_LOCK(x);						\
+		volatile unsigned int *a = __ldcw_align(x);		\
+		if (unlikely((*a == 0) && (x)->babble)) {				\
+			(x)->babble--;					\
+			printk("KERN_WARNING				\
+				%s:%d: spin_unlock_wait(%s/%p)"		\
+				" owned by %s:%d in %s at %p(%d)\n",	\
+				__FILE__,__LINE__, (x)->module, (x),	\
+				(x)->bfile, (x)->bline, (x)->task->comm,\
+				(x)->previous, (x)->oncpu);		\
+		}							\
+		barrier();						\
+	} while (*((volatile unsigned char *)(__ldcw_align(x))) == 0)
+
+extern void _dbg_spin_lock(spinlock_t *lock, const char *base_file, int line_no);
+extern void _dbg_spin_unlock(spinlock_t *lock, const char *, int);
+extern int _dbg_spin_trylock(spinlock_t * lock, const char *, int);
+
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#define _raw_spin_unlock(lock)	_dbg_spin_unlock(lock, __FILE__, __LINE__)
+#define _raw_spin_lock(lock) _dbg_spin_lock(lock, __FILE__, __LINE__)
+#define _raw_spin_trylock(lock) _dbg_spin_trylock(lock, __FILE__, __LINE__)
+
+/* just in case we need it */
+#define spin_lock_own(LOCK, LOCATION)					\
+do {									\
+	volatile unsigned int *a = __ldcw_align(LOCK);			\
+	if (!((*a == 0) && ((LOCK)->oncpu == smp_processor_id())))	\
+		printk("KERN_WARNING					\
+			%s: called on %d from %p but lock %s on %d\n",	\
+			LOCATION, smp_processor_id(),			\
+			__builtin_return_address(0),			\
+			(*a == 0) ? "taken" : "freed", (LOCK)->on_cpu);	\
+} while (0)
+
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ */
+typedef struct {
+	spinlock_t lock;
+	volatile int counter;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { __SPIN_LOCK_UNLOCKED, 0 }
+
+#define rwlock_init(lp)	do { *(lp) = RW_LOCK_UNLOCKED; } while (0)
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+/* read_lock, read_unlock are pretty straightforward.  Of course it somehow
+ * sucks we end up saving/restoring flags twice for read_lock_irqsave aso. */
+
+#ifdef CONFIG_DEBUG_RWLOCK
+extern void _dbg_read_lock(rwlock_t * rw, const char *bfile, int bline);
+#define _raw_read_lock(rw) _dbg_read_lock(rw, __FILE__, __LINE__)
+#else
+static  __inline__ void _raw_read_lock(rwlock_t *rw)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	_raw_spin_lock(&rw->lock); 
+
+	rw->counter++;
+
+	_raw_spin_unlock(&rw->lock);
+	local_irq_restore(flags);
+}
+#endif	/* CONFIG_DEBUG_RWLOCK */
+
+static  __inline__ void _raw_read_unlock(rwlock_t *rw)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	_raw_spin_lock(&rw->lock); 
+
+	rw->counter--;
+
+	_raw_spin_unlock(&rw->lock);
+	local_irq_restore(flags);
+}
+
+/* write_lock is less trivial.  We optimistically grab the lock and check
+ * if we surprised any readers.  If so we release the lock and wait till
+ * they're all gone before trying again
+ *
+ * Also note that we don't use the _irqsave / _irqrestore suffixes here.
+ * If we're called with interrupts enabled and we've got readers (or other
+ * writers) in interrupt handlers someone fucked up and we'd dead-lock
+ * sooner or later anyway.   prumpf */
+
+#ifdef CONFIG_DEBUG_RWLOCK
+extern void _dbg_write_lock(rwlock_t * rw, const char *bfile, int bline);
+#define _raw_write_lock(rw) _dbg_write_lock(rw, __FILE__, __LINE__)
+#else
+static  __inline__ void _raw_write_lock(rwlock_t *rw)
+{
+retry:
+	_raw_spin_lock(&rw->lock);
+
+	if(rw->counter != 0) {
+		/* this basically never happens */
+		_raw_spin_unlock(&rw->lock);
+
+		while(rw->counter != 0);
+
+		goto retry;
+	}
+
+	/* got it.  now leave without unlocking */
+	rw->counter = -1; /* remember we are locked */
+}
+#endif /* CONFIG_DEBUG_RWLOCK */
+
+/* write_unlock is absolutely trivial - we don't have to wait for anything */
+
+static  __inline__ void _raw_write_unlock(rwlock_t *rw)
+{
+	rw->counter = 0;
+	_raw_spin_unlock(&rw->lock);
+}
+
+#ifdef CONFIG_DEBUG_RWLOCK
+extern int _dbg_write_trylock(rwlock_t * rw, const char *bfile, int bline);
+#define _raw_write_trylock(rw) _dbg_write_trylock(rw, __FILE__, __LINE__)
+#else
+static  __inline__ int _raw_write_trylock(rwlock_t *rw)
+{
+	_raw_spin_lock(&rw->lock);
+	if (rw->counter != 0) {
+		/* this basically never happens */
+		_raw_spin_unlock(&rw->lock);
+
+		return 0;
+	}
+
+	/* got it.  now leave without unlocking */
+	rw->counter = -1; /* remember we are locked */
+	return 1;
+}
+#endif /* CONFIG_DEBUG_RWLOCK */
+
+static __inline__ int is_read_locked(rwlock_t *rw)
+{
+	return rw->counter > 0;
+}
+
+static __inline__ int is_write_locked(rwlock_t *rw)
+{
+	return rw->counter < 0;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-parisc/stat.h b/include/asm-parisc/stat.h
new file mode 100644
index 000000000000..9d5fbbc5c31f
--- /dev/null
+++ b/include/asm-parisc/stat.h
@@ -0,0 +1,100 @@
+#ifndef _PARISC_STAT_H
+#define _PARISC_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned int	st_dev;		/* dev_t is 32 bits on parisc */
+	ino_t		st_ino;		/* 32 bits */
+	mode_t		st_mode;	/* 16 bits */
+	nlink_t		st_nlink;	/* 16 bits */
+	unsigned short	st_reserved1;	/* old st_uid */
+	unsigned short	st_reserved2;	/* old st_gid */
+	unsigned int	st_rdev;
+	off_t		st_size;
+	time_t		st_atime;
+	unsigned int	st_atime_nsec;
+	time_t		st_mtime;
+	unsigned int	st_mtime_nsec;
+	time_t		st_ctime;
+	unsigned int	st_ctime_nsec;
+	int		st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;	/* ACL stuff */
+	unsigned int	__unused2;	/* network */
+	ino_t		__unused3;	/* network */
+	unsigned int	__unused4;	/* cnodes */
+	unsigned short	__unused5;	/* netsite */
+	short		st_fstype;
+	unsigned int	st_realdev;
+	unsigned short	st_basemode;
+	unsigned short	st_spareshort;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned int	st_spare4[3];
+};
+
+#define STAT_HAVE_NSEC
+
+typedef __kernel_off64_t	off64_t;
+
+struct hpux_stat64 {
+	unsigned int	st_dev;		/* dev_t is 32 bits on parisc */
+	ino_t           st_ino;         /* 32 bits */
+	mode_t		st_mode;	/* 16 bits */
+	nlink_t		st_nlink;	/* 16 bits */
+	unsigned short	st_reserved1;	/* old st_uid */
+	unsigned short	st_reserved2;	/* old st_gid */
+	unsigned int	st_rdev;
+	off64_t		st_size;
+	time_t		st_atime;
+	unsigned int	st_spare1;
+	time_t		st_mtime;
+	unsigned int	st_spare2;
+	time_t		st_ctime;
+	unsigned int	st_spare3;
+	int		st_blksize;
+	__u64		st_blocks;
+	unsigned int	__unused1;	/* ACL stuff */
+	unsigned int	__unused2;	/* network */
+	ino_t           __unused3;      /* network */
+	unsigned int	__unused4;	/* cnodes */
+	unsigned short	__unused5;	/* netsite */
+	short		st_fstype;
+	unsigned int	st_realdev;
+	unsigned short	st_basemode;
+	unsigned short	st_spareshort;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned int	st_spare4[3];
+};
+
+/* This is the struct that 32-bit userspace applications are expecting.
+ * How 64-bit apps are going to be compiled, I have no idea.  But at least
+ * this way, we don't have a wrapper in the kernel.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned int		__pad1;
+
+	unsigned int		__st_ino;	/* Not actually filled in */
+	unsigned int		st_mode;
+	unsigned int		st_nlink;
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+	unsigned long long	st_rdev;
+	unsigned int		__pad2;
+	signed long long	st_size;
+	signed int		st_blksize;
+
+	signed long long	st_blocks;
+	signed int		st_atime;
+	unsigned int		st_atime_nsec;
+	signed int		st_mtime;
+	unsigned int		st_mtime_nsec;
+	signed int		st_ctime;
+	unsigned int		st_ctime_nsec;
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/include/asm-parisc/statfs.h b/include/asm-parisc/statfs.h
new file mode 100644
index 000000000000..a52d8f93f05c
--- /dev/null
+++ b/include/asm-parisc/statfs.h
@@ -0,0 +1,58 @@
+#ifndef _PARISC_STATFS_H
+#define _PARISC_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+/*
+ * It appears that PARISC could be 64 _or_ 32 bit.
+ * 64-bit fields must be explicitly 64-bit in statfs64.
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	u64 f_blocks;
+	u64 f_bfree;
+	u64 f_bavail;
+	u64 f_files;
+	u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/include/asm-parisc/string.h b/include/asm-parisc/string.h
new file mode 100644
index 000000000000..eda01be65e35
--- /dev/null
+++ b/include/asm-parisc/string.h
@@ -0,0 +1,10 @@
+#ifndef _PA_STRING_H_
+#define _PA_STRING_H_
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, size_t);
+
+#define __HAVE_ARCH_MEMCPY
+void * memcpy(void * dest,const void *src,size_t count);
+
+#endif
diff --git a/include/asm-parisc/superio.h b/include/asm-parisc/superio.h
new file mode 100644
index 000000000000..6598acb4d46d
--- /dev/null
+++ b/include/asm-parisc/superio.h
@@ -0,0 +1,85 @@
+#ifndef _PARISC_SUPERIO_H
+#define _PARISC_SUPERIO_H
+
+#define IC_PIC1    0x20		/* PCI I/O address of master 8259 */
+#define IC_PIC2    0xA0		/* PCI I/O address of slave */
+
+/* Config Space Offsets to configuration and base address registers */
+#define SIO_CR     0x5A		/* Configuration Register */
+#define SIO_ACPIBAR 0x88	/* ACPI BAR */
+#define SIO_FDCBAR 0x90		/* Floppy Disk Controller BAR */
+#define SIO_SP1BAR 0x94		/* Serial 1 BAR */
+#define SIO_SP2BAR 0x98		/* Serial 2 BAR */
+#define SIO_PPBAR  0x9C		/* Parallel BAR */
+
+#define TRIGGER_1  0x67		/* Edge/level trigger register 1 */
+#define TRIGGER_2  0x68		/* Edge/level trigger register 2 */
+
+/* Interrupt Routing Control registers */
+#define CFG_IR_SER    0x69	/* Serial 1 [0:3] and Serial 2 [4:7] */
+#define CFG_IR_PFD    0x6a	/* Parallel [0:3] and Floppy [4:7] */
+#define CFG_IR_IDE    0x6b	/* IDE1     [0:3] and IDE2 [4:7] */
+#define CFG_IR_INTAB  0x6c	/* PCI INTA [0:3] and INT B [4:7] */
+#define CFG_IR_INTCD  0x6d	/* PCI INTC [0:3] and INT D [4:7] */
+#define CFG_IR_PS2    0x6e	/* PS/2 KBINT [0:3] and Mouse [4:7] */
+#define CFG_IR_FXBUS  0x6f	/* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */
+#define CFG_IR_USB    0x70	/* FXIRQ[2] [0:3] and USB [4:7] */
+#define CFG_IR_ACPI   0x71	/* ACPI SCI [0:3] and reserved [4:7] */
+
+#define CFG_IR_LOW     CFG_IR_SER	/* Lowest interrupt routing reg */
+#define CFG_IR_HIGH    CFG_IR_ACPI	/* Highest interrupt routing reg */
+
+/* 8259 operational control words */
+#define OCW2_EOI   0x20		/* Non-specific EOI */
+#define OCW2_SEOI  0x60		/* Specific EOI */
+#define OCW3_IIR   0x0A		/* Read request register */
+#define OCW3_ISR   0x0B		/* Read service register */
+#define OCW3_POLL  0x0C		/* Poll the PIC for an interrupt vector */
+
+/* Interrupt lines. Only PIC1 is used */
+#define USB_IRQ    1		/* USB */
+#define SP1_IRQ    3		/* Serial port 1 */
+#define SP2_IRQ    4		/* Serial port 2 */
+#define PAR_IRQ    5		/* Parallel port */
+#define FDC_IRQ    6		/* Floppy controller */
+#define IDE_IRQ    7		/* IDE (pri+sec) */
+
+/* ACPI registers */
+#define USB_REG_CR	0x1f	/* USB Regulator Control Register */
+
+#define SUPERIO_NIRQS   8
+
+struct superio_device {
+	u32 fdc_base;
+	u32 sp1_base;
+	u32 sp2_base;
+	u32 pp_base;
+	u32 acpi_base;
+	int suckyio_irq_enabled;
+	struct pci_dev *lio_pdev;       /* pci device for legacy IO (fn 1) */
+	struct pci_dev *usb_pdev;       /* pci device for USB (fn 2) */
+};
+
+/*
+ * Does NS make a 87415 based plug in PCI card? If so, because of this
+ * macro we currently don't support it being plugged into a machine
+ * that contains a SuperIO chip AND has CONFIG_SUPERIO enabled.
+ *
+ * This could be fixed by checking to see if function 1 exists, and
+ * if it is SuperIO Legacy IO; but really now, is this combination
+ * going to EVER happen?
+ */
+
+#define SUPERIO_IDE_FN 0 /* Function number of IDE controller */
+#define SUPERIO_LIO_FN 1 /* Function number of Legacy IO controller */
+#define SUPERIO_USB_FN 2 /* Function number of USB controller */
+
+#define is_superio_device(x) \
+	(((x)->vendor == PCI_VENDOR_ID_NS) && \
+	(  ((x)->device == PCI_DEVICE_ID_NS_87415) \
+	|| ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \
+	|| ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) )
+
+extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */
+
+#endif /* _PARISC_SUPERIO_H */
diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h
new file mode 100644
index 000000000000..81c543339036
--- /dev/null
+++ b/include/asm-parisc/system.h
@@ -0,0 +1,210 @@
+#ifndef __PARISC_SYSTEM_H
+#define __PARISC_SYSTEM_H
+
+#include <linux/config.h>
+#include <asm/psw.h>
+
+/* The program status word as bitfields.  */
+struct pa_psw {
+	unsigned int y:1;
+	unsigned int z:1;
+	unsigned int rv:2;
+	unsigned int w:1;
+	unsigned int e:1;
+	unsigned int s:1;
+	unsigned int t:1;
+
+	unsigned int h:1;
+	unsigned int l:1;
+	unsigned int n:1;
+	unsigned int x:1;
+	unsigned int b:1;
+	unsigned int c:1;
+	unsigned int v:1;
+	unsigned int m:1;
+
+	unsigned int cb:8;
+
+	unsigned int o:1;
+	unsigned int g:1;
+	unsigned int f:1;
+	unsigned int r:1;
+	unsigned int q:1;
+	unsigned int p:1;
+	unsigned int d:1;
+	unsigned int i:1;
+};
+
+#ifdef __LP64__
+#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
+#else
+#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
+#endif
+
+struct task_struct;
+
+extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
+
+#define switch_to(prev, next, last) do {			\
+	(last) = _switch_to(prev, next);			\
+} while(0)
+
+
+
+/* interrupt control */
+#define local_save_flags(x)	__asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory")
+#define local_irq_disable()	__asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
+#define local_irq_enable()	__asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
+
+#define local_irq_save(x) \
+	__asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" )
+#define local_irq_restore(x) \
+	__asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" )
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	(flags & PSW_I) == 0;		\
+})
+
+#define mfctl(reg)	({		\
+	unsigned long cr;		\
+	__asm__ __volatile__(		\
+		"mfctl " #reg ",%0" :	\
+		 "=r" (cr)		\
+	);				\
+	cr;				\
+})
+
+#define mtctl(gr, cr) \
+	__asm__ __volatile__("mtctl %0,%1" \
+		: /* no outputs */ \
+		: "r" (gr), "i" (cr) : "memory")
+
+/* these are here to de-mystefy the calling code, and to provide hooks */
+/* which I needed for debugging EIEM problems -PB */
+#define get_eiem() mfctl(15)
+static inline void set_eiem(unsigned long val)
+{
+	mtctl(val, 15);
+}
+
+#define mfsp(reg)	({		\
+	unsigned long cr;		\
+	__asm__ __volatile__(		\
+		"mfsp " #reg ",%0" :	\
+		 "=r" (cr)		\
+	);				\
+	cr;				\
+})
+
+#define mtsp(gr, cr) \
+	__asm__ __volatile__("mtsp %0,%1" \
+		: /* no outputs */ \
+		: "r" (gr), "i" (cr) : "memory")
+
+
+/*
+** This is simply the barrier() macro from linux/kernel.h but when serial.c
+** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
+** hasn't yet been included yet so it fails, thus repeating the macro here.
+**
+** PA-RISC architecture allows for weakly ordered memory accesses although
+** none of the processors use it. There is a strong ordered bit that is
+** set in the O-bit of the page directory entry. Operating systems that
+** can not tolerate out of order accesses should set this bit when mapping
+** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
+** of the processor implemented the PSW O-bit). The PCX-W ERS states that
+** the TLB O-bit is not implemented so the page directory does not need to
+** have the O-bit set when mapping pages (section 3.1). This section also
+** states that the PSW Y, Z, G, and O bits are not implemented.
+** So it looks like nothing needs to be done for parisc-linux (yet).
+** (thanks to chada for the above comment -ggg)
+**
+** The __asm__ op below simple prevents gcc/ld from reordering
+** instructions across the mb() "call".
+*/
+#define mb()		__asm__ __volatile__("":::"memory")	/* barrier() */
+#define rmb()		mb()
+#define wmb()		mb()
+#define smp_mb()	mb()
+#define smp_rmb()	mb()
+#define smp_wmb()	mb()
+#define smp_read_barrier_depends()	do { } while(0)
+#define read_barrier_depends()		do { } while(0)
+
+#define set_mb(var, value)		do { var = value; mb(); } while (0)
+#define set_wmb(var, value)		do { var = value; wmb(); } while (0)
+
+
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
+#define __ldcw(a) ({ \
+	unsigned __ret; \
+	__asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \
+	__ret; \
+})
+
+/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
+   and GCC only guarantees 8-byte alignment for stack locals, we can't
+   be assured of 16-byte alignment for atomic lock data even if we
+   specify "__attribute ((aligned(16)))" in the type declaration.  So,
+   we use a struct containing an array of four ints for the atomic lock
+   type and dynamically select the 16-byte aligned int from the array
+   for the semaphore.  */
+#define __PA_LDCW_ALIGNMENT 16
+#define __ldcw_align(a) ({ \
+  unsigned long __ret = (unsigned long) &(a)->lock[0];        		\
+  __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \
+  (volatile unsigned int *) __ret;                                      \
+})
+
+#ifdef CONFIG_SMP
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+	volatile unsigned int lock[4];
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned long magic;
+	volatile unsigned int babble;
+	const char *module;
+	char *bfile;
+	int bline;
+	int oncpu;
+	void *previous;
+	struct task_struct * task;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+
+#endif
+
+#define KERNEL_START (0x10100000 - 0x1000)
+
+/* This is for the serialisation of PxTLB broadcasts.  At least on the
+ * N class systems, only one PxTLB inter processor broadcast can be
+ * active at any one time on the Merced bus.  This tlb purge
+ * synchronisation is fairly lightweight and harmless so we activate
+ * it on all SMP systems not just the N class. */
+#ifdef CONFIG_SMP
+extern spinlock_t pa_tlb_lock;
+
+#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
+#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+
+#else
+
+#define purge_tlb_start(x) do { } while(0)
+#define purge_tlb_end(x) do { } while (0)
+
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-parisc/termbits.h b/include/asm-parisc/termbits.h
new file mode 100644
index 000000000000..372b634892c9
--- /dev/null
+++ b/include/asm-parisc/termbits.h
@@ -0,0 +1,175 @@
+#ifndef __ARCH_PARISC_TERMBITS_H__
+#define __ARCH_PARISC_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0040000
+#define IUTF8	0100000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000  /* input baud rate (not used) */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+
+
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/include/asm-parisc/termios.h b/include/asm-parisc/termios.h
new file mode 100644
index 000000000000..6965e8f6c3e1
--- /dev/null
+++ b/include/asm-parisc/termios.h
@@ -0,0 +1,106 @@
+#ifndef _PARISC_TERMIOS_H
+#define _PARISC_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _PARISC_TERMIOS_H */
diff --git a/include/asm-parisc/thread_info.h b/include/asm-parisc/thread_info.h
new file mode 100644
index 000000000000..fe9b7f8ae4c6
--- /dev/null
+++ b/include/asm-parisc/thread_info.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_PARISC_THREAD_INFO_H
+#define _ASM_PARISC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct *task;	/* main task structure */
+	struct exec_domain *exec_domain;/* execution domain */
+	unsigned long flags;		/* thread_info flags (see TIF_*) */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	__u32 cpu;			/* current CPU */
+	__s32 preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 1,			\
+  	.restart_block	= {			\
+		.fn = do_no_restart_syscall	\
+	}					\
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* thread information allocation */
+
+#define THREAD_ORDER            2
+/* Be sure to hunt all references to this down when you change the size of
+ * the kernel stack */
+#define THREAD_SIZE             (PAGE_SIZE << THREAD_ORDER)
+#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_ORDER)
+
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+			__get_free_pages(GFP_KERNEL, THREAD_ORDER))
+#define free_thread_info(ti)    free_pages((unsigned long) (ti), THREAD_ORDER)
+#define get_thread_info(ti)     get_task_struct((ti)->task)
+#define put_thread_info(ti)     put_task_struct((ti)->task)
+
+
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
+#define PREEMPT_ACTIVE          0x10000000
+
+/*
+ * thread information flags
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_32BIT               5       /* 32 bit binary */
+#define TIF_MEMDIE		6
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1 << TIF_32BIT)
+
+#define _TIF_USER_WORK_MASK     (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
+                                 _TIF_NEED_RESCHED)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PARISC_THREAD_INFO_H */
diff --git a/include/asm-parisc/timex.h b/include/asm-parisc/timex.h
new file mode 100644
index 000000000000..3b68d77273d9
--- /dev/null
+++ b/include/asm-parisc/timex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-parisc/timex.h
+ *
+ * PARISC architecture timex specifications
+ */
+#ifndef _ASMPARISC_TIMEX_H
+#define _ASMPARISC_TIMEX_H
+
+#include <asm/system.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return mfctl(16);
+}
+
+#endif
diff --git a/include/asm-parisc/tlb.h b/include/asm-parisc/tlb.h
new file mode 100644
index 000000000000..33107a248e1f
--- /dev/null
+++ b/include/asm-parisc/tlb.h
@@ -0,0 +1,27 @@
+#ifndef _PARISC_TLB_H
+#define _PARISC_TLB_H
+
+#define tlb_flush(tlb)			\
+do {	if ((tlb)->fullmm)		\
+		flush_tlb_mm((tlb)->mm);\
+} while (0)
+
+#define tlb_start_vma(tlb, vma) \
+do {	if (!(tlb)->fullmm)	\
+		flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define tlb_end_vma(tlb, vma)	\
+do {	if (!(tlb)->fullmm)	\
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#include <asm-generic/tlb.h>
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free(pmd)
+#define __pte_free_tlb(tlb, pte)	pte_free(pte)
+
+#endif
diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h
new file mode 100644
index 000000000000..eb27b78930e8
--- /dev/null
+++ b/include/asm-parisc/tlbflush.h
@@ -0,0 +1,95 @@
+#ifndef _PARISC_TLBFLUSH_H
+#define _PARISC_TLBFLUSH_H
+
+/* TLB flushing routines.... */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+extern void flush_tlb_all(void);
+
+/*
+ * flush_tlb_mm()
+ *
+ * XXX This code is NOT valid for HP-UX compatibility processes,
+ * (although it will probably work 99% of the time). HP-UX
+ * processes are free to play with the space id's and save them
+ * over long periods of time, etc. so we have to preserve the
+ * space and just flush the entire tlb. We need to check the
+ * personality in order to do that, but the personality is not
+ * currently being set correctly.
+ *
+ * Of course, Linux processes could do the same thing, but
+ * we don't support that (and the compilers, dynamic linker,
+ * etc. do not do that).
+ */
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG_ON(mm == &init_mm); /* Should never happen */
+
+#ifdef CONFIG_SMP
+	flush_tlb_all();
+#else
+	if (mm) {
+		if (mm->context != 0)
+			free_sid(mm->context);
+		mm->context = alloc_sid();
+		if (mm == current->active_mm)
+			load_context(mm->context);
+	}
+#endif
+}
+
+extern __inline__ void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+}
+ 
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long addr)
+{
+	/* For one page, it's not worth testing the split_tlb variable */
+
+	mb();
+	mtsp(vma->vm_mm->context,1);
+	purge_tlb_start();
+	pdtlb(addr);
+	pitlb(addr);
+	purge_tlb_end();
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end)
+{
+	unsigned long npages;
+
+	
+	npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (npages >= 512)  /* XXX arbitrary, should be tuned */
+		flush_tlb_all();
+	else {
+
+		mtsp(vma->vm_mm->context,1);
+		if (split_tlb) {
+			purge_tlb_start();
+			while (npages--) {
+				pdtlb(start);
+				pitlb(start);
+				start += PAGE_SIZE;
+			}
+			purge_tlb_end();
+		} else {
+			purge_tlb_start();
+			while (npages--) {
+				pdtlb(start);
+				start += PAGE_SIZE;
+			}
+			purge_tlb_end();
+		}
+	}
+}
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#endif
diff --git a/include/asm-parisc/topology.h b/include/asm-parisc/topology.h
new file mode 100644
index 000000000000..d8133eb0b1e7
--- /dev/null
+++ b/include/asm-parisc/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_PARISC_TOPOLOGY_H
+#define _ASM_PARISC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_PARISC_TOPOLOGY_H */
diff --git a/include/asm-parisc/traps.h b/include/asm-parisc/traps.h
new file mode 100644
index 000000000000..1945f995f2df
--- /dev/null
+++ b/include/asm-parisc/traps.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_TRAPS_H
+#define __ASM_TRAPS_H
+
+#ifdef __KERNEL__
+struct pt_regs;
+
+/* traps.c */
+void parisc_terminate(char *msg, struct pt_regs *regs,
+		int code, unsigned long offset);
+
+/* mm/fault.c */
+void do_page_fault(struct pt_regs *regs, unsigned long code,
+		unsigned long address);
+#endif
+
+#endif
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
new file mode 100644
index 000000000000..8fe7a44ea205
--- /dev/null
+++ b/include/asm-parisc/types.h
@@ -0,0 +1,65 @@
+#ifndef _PARISC_TYPES_H
+#define _PARISC_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifdef __LP64__
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-parisc/uaccess.h b/include/asm-parisc/uaccess.h
new file mode 100644
index 000000000000..8a08423b7570
--- /dev/null
+++ b/include/asm-parisc/uaccess.h
@@ -0,0 +1,287 @@
+#ifndef __PARISC_UACCESS_H
+#define __PARISC_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm-generic/uaccess.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define KERNEL_DS	((mm_segment_t){0})
+#define USER_DS 	((mm_segment_t){1})
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+/*
+ * Note that since kernel addresses are in a separate address space on
+ * parisc, we don't need to do anything for access_ok() or verify_area().
+ * We just let the page fault handler do the right thing. This also means
+ * that put_user is the same as __put_user, etc.
+ */
+
+extern int __get_kernel_bad(void);
+extern int __get_user_bad(void);
+extern int __put_kernel_bad(void);
+extern int __put_user_bad(void);
+
+static inline long access_ok(int type, const void __user * addr,
+		unsigned long size)
+{
+	return 1;
+}
+
+#define verify_area(type,addr,size) (0)	/* FIXME: all users should go away soon,
+                                         * and use access_ok instead, then this
+                                         * should be removed. */
+
+#define put_user __put_user
+#define get_user __get_user
+
+#if BITS_PER_LONG == 32
+#define LDD_KERNEL(ptr)		__get_kernel_bad();
+#define LDD_USER(ptr)		__get_user_bad();
+#define STD_KERNEL(x, ptr)	__put_kernel_asm64(x,ptr)
+#define STD_USER(x, ptr)	__put_user_asm64(x,ptr)
+#else
+#define LDD_KERNEL(ptr) __get_kernel_asm("ldd",ptr)
+#define LDD_USER(ptr) __get_user_asm("ldd",ptr)
+#define STD_KERNEL(x, ptr) __put_kernel_asm("std",x,ptr)
+#define STD_USER(x, ptr) __put_user_asm("std",x,ptr)
+#endif
+
+/*
+ * The exception table contains two values: the first is an address
+ * for an instruction that is allowed to fault, and the second is
+ * the address to the fixup routine. 
+ */
+
+struct exception_table_entry {
+	unsigned long insn;  /* address of insn that is allowed to fault.   */
+	long fixup;          /* fixup routine */
+};
+
+/*
+ * The page fault handler stores, in a per-cpu area, the following information
+ * if a fixup routine is available.
+ */
+struct exception_data {
+	unsigned long fault_ip;
+	unsigned long fault_space;
+	unsigned long fault_addr;
+};
+
+#define __get_user(x,ptr)                               \
+({                                                      \
+	register long __gu_err __asm__ ("r8") = 0;      \
+	register long __gu_val __asm__ ("r9") = 0;      \
+							\
+	if (segment_eq(get_fs(),KERNEL_DS)) {           \
+	    switch (sizeof(*(ptr))) {                   \
+	    case 1: __get_kernel_asm("ldb",ptr); break; \
+	    case 2: __get_kernel_asm("ldh",ptr); break; \
+	    case 4: __get_kernel_asm("ldw",ptr); break; \
+	    case 8: LDD_KERNEL(ptr); break;		\
+	    default: __get_kernel_bad(); break;         \
+	    }                                           \
+	}                                               \
+	else {                                          \
+	    switch (sizeof(*(ptr))) {                   \
+	    case 1: __get_user_asm("ldb",ptr); break;   \
+	    case 2: __get_user_asm("ldh",ptr); break;   \
+	    case 4: __get_user_asm("ldw",ptr); break;   \
+	    case 8: LDD_USER(ptr);  break;		\
+	    default: __get_user_bad(); break;           \
+	    }                                           \
+	}                                               \
+							\
+	(x) = (__typeof__(*(ptr))) __gu_val;            \
+	__gu_err;                                       \
+})
+
+#ifdef __LP64__
+#define __get_kernel_asm(ldx,ptr)                       \
+	__asm__("\n1:\t" ldx "\t0(%2),%0\n"             \
+		"\t.section __ex_table,\"aw\"\n"        \
+		"\t.dword\t1b,fixup_get_user_skip_1\n"	\
+		"\t.previous"                          	\
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+
+#define __get_user_asm(ldx,ptr)                         \
+	__asm__("\n1:\t" ldx "\t0(%%sr3,%2),%0\n"       \
+		"\t.section __ex_table,\"aw\"\n"	\
+		"\t.dword\t1b,fixup_get_user_skip_1\n"	\
+		"\t.previous"				\
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+#else
+#define __get_kernel_asm(ldx,ptr)                       \
+	__asm__("\n1:\t" ldx "\t0(%2),%0\n"             \
+		"\t.section __ex_table,\"aw\"\n"        \
+		"\t.word\t1b,fixup_get_user_skip_1\n"	\
+		"\t.previous"                          	\
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+
+#define __get_user_asm(ldx,ptr)                         \
+	__asm__("\n1:\t" ldx "\t0(%%sr3,%2),%0\n"       \
+		"\t.section __ex_table,\"aw\"\n"	\
+		 "\t.word\t1b,fixup_get_user_skip_1\n"	\
+		 "\t.previous"                          \
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+#endif /* !__LP64__ */
+
+#define __put_user(x,ptr)                                       \
+({								\
+	register long __pu_err __asm__ ("r8") = 0;      	\
+        __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x);	\
+								\
+	if (segment_eq(get_fs(),KERNEL_DS)) {                   \
+	    switch (sizeof(*(ptr))) {                           \
+	    case 1: __put_kernel_asm("stb",__x,ptr); break;     \
+	    case 2: __put_kernel_asm("sth",__x,ptr); break;     \
+	    case 4: __put_kernel_asm("stw",__x,ptr); break;     \
+	    case 8: STD_KERNEL(__x,ptr); break;			\
+	    default: __put_kernel_bad(); break;			\
+	    }                                                   \
+	}                                                       \
+	else {                                                  \
+	    switch (sizeof(*(ptr))) {                           \
+	    case 1: __put_user_asm("stb",__x,ptr); break;       \
+	    case 2: __put_user_asm("sth",__x,ptr); break;       \
+	    case 4: __put_user_asm("stw",__x,ptr); break;       \
+	    case 8: STD_USER(__x,ptr); break;			\
+	    default: __put_user_bad(); break;			\
+	    }                                                   \
+	}                                                       \
+								\
+	__pu_err;						\
+})
+
+/*
+ * The "__put_user/kernel_asm()" macros tell gcc they read from memory
+ * instead of writing. This is because they do not write to any memory
+ * gcc knows about, so there are no aliasing issues.
+ */
+
+#ifdef __LP64__
+#define __put_kernel_asm(stx,x,ptr)                         \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%1)\n"                 \
+		"\t.section __ex_table,\"aw\"\n"            \
+		"\t.dword\t1b,fixup_put_user_skip_1\n"	    \
+		"\t.previous"                               \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err))
+
+#define __put_user_asm(stx,x,ptr)                           \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%%sr3,%1)\n"           \
+		"\t.section __ex_table,\"aw\"\n"            \
+		 "\t.dword\t1b,fixup_put_user_skip_1\n"	    \
+		 "\t.previous"                              \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
+		: "r1")
+#else
+#define __put_kernel_asm(stx,x,ptr)                         \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%1)\n"                 \
+		"\t.section __ex_table,\"aw\"\n"            \
+		 "\t.word\t1b,fixup_put_user_skip_1\n"	    \
+		 "\t.previous"                              \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
+		: "r1")
+
+#define __put_user_asm(stx,x,ptr)                           \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%%sr3,%1)\n"           \
+		"\t.section __ex_table,\"aw\"\n"            \
+		 "\t.word\t1b,fixup_put_user_skip_1\n"      \
+		 "\t.previous"                              \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
+		: "r1")
+
+#define __put_kernel_asm64(__val,ptr) do {		    	    \
+	u64 __val64 = (u64)(__val);				    \
+	u32 hi = (__val64) >> 32;					    \
+	u32 lo = (__val64) & 0xffffffff;				    \
+	__asm__ __volatile__ (				    \
+		"\n1:\tstw %2,0(%1)\n"			    \
+		"\n2:\tstw %3,4(%1)\n"			    \
+		"\t.section __ex_table,\"aw\"\n"	    \
+		 "\t.word\t1b,fixup_put_user_skip_2\n"	    \
+		 "\t.word\t2b,fixup_put_user_skip_1\n"	    \
+		 "\t.previous"				    \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
+		: "r1");				    \
+} while (0)
+
+#define __put_user_asm64(__val,ptr) do {		    	    \
+	u64 __val64 = (u64)__val;				    \
+	u32 hi = (__val64) >> 32;					    \
+	u32 lo = (__val64) & 0xffffffff;				    \
+	__asm__ __volatile__ (				    \
+		"\n1:\tstw %2,0(%%sr3,%1)\n"		    \
+		"\n2:\tstw %3,4(%%sr3,%1)\n"		    \
+		"\t.section __ex_table,\"aw\"\n"	    \
+		 "\t.word\t1b,fixup_get_user_skip_2\n"	    \
+		 "\t.word\t2b,fixup_get_user_skip_1\n"	    \
+		 "\t.previous"				    \
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
+		: "r1");				    \
+} while (0)
+
+#endif /* !__LP64__ */
+
+
+/*
+ * Complex access routines -- external declarations
+ */
+
+extern unsigned long lcopy_to_user(void __user *, const void *, unsigned long);
+extern unsigned long lcopy_from_user(void *, const void __user *, unsigned long);
+extern unsigned long lcopy_in_user(void __user *, const void __user *, unsigned long);
+extern long lstrncpy_from_user(char *, const char __user *, long);
+extern unsigned lclear_user(void __user *,unsigned long);
+extern long lstrnlen_user(const char __user *,long);
+
+/*
+ * Complex access routines -- macros
+ */
+
+#define strncpy_from_user lstrncpy_from_user
+#define strnlen_user lstrnlen_user
+#define strlen_user(str) lstrnlen_user(str, 0x7fffffffL)
+#define clear_user lclear_user
+#define __clear_user lclear_user
+
+unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len);
+#define __copy_to_user copy_to_user
+unsigned long copy_from_user(void *dst, const void __user *src, unsigned long len);
+#define __copy_from_user copy_from_user
+unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len);
+#define __copy_in_user copy_in_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif /* __PARISC_UACCESS_H */
diff --git a/include/asm-parisc/ucontext.h b/include/asm-parisc/ucontext.h
new file mode 100644
index 000000000000..6c8883e4b0bd
--- /dev/null
+++ b/include/asm-parisc/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_PARISC_UCONTEXT_H
+#define _ASM_PARISC_UCONTEXT_H
+
+struct ucontext {
+	unsigned int	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_PARISC_UCONTEXT_H */
diff --git a/include/asm-parisc/unaligned.h b/include/asm-parisc/unaligned.h
new file mode 100644
index 000000000000..53c905838d93
--- /dev/null
+++ b/include/asm-parisc/unaligned.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_PARISC_UNALIGNED_H_
+#define _ASM_PARISC_UNALIGNED_H_
+
+#include <asm-generic/unaligned.h>
+
+#ifdef __KERNEL__
+struct pt_regs;
+void handle_unaligned(struct pt_regs *regs);
+int check_unaligned(struct pt_regs *regs);
+#endif
+
+#endif /* _ASM_PARISC_UNALIGNED_H_ */
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
new file mode 100644
index 000000000000..6a9f0cadff58
--- /dev/null
+++ b/include/asm-parisc/unistd.h
@@ -0,0 +1,1029 @@
+#ifndef _ASM_PARISC_UNISTD_H_
+#define _ASM_PARISC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+/*
+ *   HP-UX system calls get their native numbers for binary compatibility.
+ */
+
+#define __NR_HPUX_exit                    1
+#define __NR_HPUX_fork                    2
+#define __NR_HPUX_read                    3
+#define __NR_HPUX_write                   4
+#define __NR_HPUX_open                    5
+#define __NR_HPUX_close                   6
+#define __NR_HPUX_wait                    7
+#define __NR_HPUX_creat                   8
+#define __NR_HPUX_link                    9
+#define __NR_HPUX_unlink                 10
+#define __NR_HPUX_execv                  11
+#define __NR_HPUX_chdir                  12
+#define __NR_HPUX_time                   13
+#define __NR_HPUX_mknod                  14
+#define __NR_HPUX_chmod                  15
+#define __NR_HPUX_chown                  16
+#define __NR_HPUX_break                  17
+#define __NR_HPUX_lchmod                 18
+#define __NR_HPUX_lseek                  19
+#define __NR_HPUX_getpid                 20
+#define __NR_HPUX_mount                  21
+#define __NR_HPUX_umount                 22
+#define __NR_HPUX_setuid                 23
+#define __NR_HPUX_getuid                 24
+#define __NR_HPUX_stime                  25
+#define __NR_HPUX_ptrace                 26
+#define __NR_HPUX_alarm                  27
+#define __NR_HPUX_oldfstat               28
+#define __NR_HPUX_pause                  29
+#define __NR_HPUX_utime                  30
+#define __NR_HPUX_stty                   31
+#define __NR_HPUX_gtty                   32
+#define __NR_HPUX_access                 33
+#define __NR_HPUX_nice                   34
+#define __NR_HPUX_ftime                  35
+#define __NR_HPUX_sync                   36
+#define __NR_HPUX_kill                   37
+#define __NR_HPUX_stat                   38
+#define __NR_HPUX_setpgrp3               39
+#define __NR_HPUX_lstat                  40
+#define __NR_HPUX_dup                    41
+#define __NR_HPUX_pipe                   42
+#define __NR_HPUX_times                  43
+#define __NR_HPUX_profil                 44
+#define __NR_HPUX_ki_call                45
+#define __NR_HPUX_setgid                 46
+#define __NR_HPUX_getgid                 47
+#define __NR_HPUX_sigsys                 48
+#define __NR_HPUX_reserved1              49
+#define __NR_HPUX_reserved2              50
+#define __NR_HPUX_acct                   51
+#define __NR_HPUX_set_userthreadid       52
+#define __NR_HPUX_oldlock                53
+#define __NR_HPUX_ioctl                  54
+#define __NR_HPUX_reboot                 55
+#define __NR_HPUX_symlink                56
+#define __NR_HPUX_utssys                 57
+#define __NR_HPUX_readlink               58
+#define __NR_HPUX_execve                 59
+#define __NR_HPUX_umask                  60
+#define __NR_HPUX_chroot                 61
+#define __NR_HPUX_fcntl                  62
+#define __NR_HPUX_ulimit                 63
+#define __NR_HPUX_getpagesize            64
+#define __NR_HPUX_mremap                 65
+#define __NR_HPUX_vfork                  66
+#define __NR_HPUX_vread                  67
+#define __NR_HPUX_vwrite                 68
+#define __NR_HPUX_sbrk                   69
+#define __NR_HPUX_sstk                   70
+#define __NR_HPUX_mmap                   71
+#define __NR_HPUX_vadvise                72
+#define __NR_HPUX_munmap                 73
+#define __NR_HPUX_mprotect               74
+#define __NR_HPUX_madvise                75
+#define __NR_HPUX_vhangup                76
+#define __NR_HPUX_swapoff                77
+#define __NR_HPUX_mincore                78
+#define __NR_HPUX_getgroups              79
+#define __NR_HPUX_setgroups              80
+#define __NR_HPUX_getpgrp2               81
+#define __NR_HPUX_setpgrp2               82
+#define __NR_HPUX_setitimer              83
+#define __NR_HPUX_wait3                  84
+#define __NR_HPUX_swapon                 85
+#define __NR_HPUX_getitimer              86
+#define __NR_HPUX_gethostname42          87
+#define __NR_HPUX_sethostname42          88
+#define __NR_HPUX_getdtablesize          89
+#define __NR_HPUX_dup2                   90
+#define __NR_HPUX_getdopt                91
+#define __NR_HPUX_fstat                  92
+#define __NR_HPUX_select                 93
+#define __NR_HPUX_setdopt                94
+#define __NR_HPUX_fsync                  95
+#define __NR_HPUX_setpriority            96
+#define __NR_HPUX_socket_old             97
+#define __NR_HPUX_connect_old            98
+#define __NR_HPUX_accept_old             99
+#define __NR_HPUX_getpriority           100
+#define __NR_HPUX_send_old              101
+#define __NR_HPUX_recv_old              102
+#define __NR_HPUX_socketaddr_old        103
+#define __NR_HPUX_bind_old              104
+#define __NR_HPUX_setsockopt_old        105
+#define __NR_HPUX_listen_old            106
+#define __NR_HPUX_vtimes_old            107
+#define __NR_HPUX_sigvector             108
+#define __NR_HPUX_sigblock              109
+#define __NR_HPUX_siggetmask            110
+#define __NR_HPUX_sigpause              111
+#define __NR_HPUX_sigstack              112
+#define __NR_HPUX_recvmsg_old           113
+#define __NR_HPUX_sendmsg_old           114
+#define __NR_HPUX_vtrace_old            115
+#define __NR_HPUX_gettimeofday          116
+#define __NR_HPUX_getrusage             117
+#define __NR_HPUX_getsockopt_old        118
+#define __NR_HPUX_resuba_old            119
+#define __NR_HPUX_readv                 120
+#define __NR_HPUX_writev                121
+#define __NR_HPUX_settimeofday          122
+#define __NR_HPUX_fchown                123
+#define __NR_HPUX_fchmod                124
+#define __NR_HPUX_recvfrom_old          125
+#define __NR_HPUX_setresuid             126
+#define __NR_HPUX_setresgid             127
+#define __NR_HPUX_rename                128
+#define __NR_HPUX_truncate              129
+#define __NR_HPUX_ftruncate             130
+#define __NR_HPUX_flock_old             131
+#define __NR_HPUX_sysconf               132
+#define __NR_HPUX_sendto_old            133
+#define __NR_HPUX_shutdown_old          134
+#define __NR_HPUX_socketpair_old        135
+#define __NR_HPUX_mkdir                 136
+#define __NR_HPUX_rmdir                 137
+#define __NR_HPUX_utimes_old            138
+#define __NR_HPUX_sigcleanup_old        139
+#define __NR_HPUX_setcore               140
+#define __NR_HPUX_getpeername_old       141
+#define __NR_HPUX_gethostid             142
+#define __NR_HPUX_sethostid             143
+#define __NR_HPUX_getrlimit             144
+#define __NR_HPUX_setrlimit             145
+#define __NR_HPUX_killpg_old            146
+#define __NR_HPUX_cachectl              147
+#define __NR_HPUX_quotactl              148
+#define __NR_HPUX_get_sysinfo           149
+#define __NR_HPUX_getsockname_old       150
+#define __NR_HPUX_privgrp               151
+#define __NR_HPUX_rtprio                152
+#define __NR_HPUX_plock                 153
+#define __NR_HPUX_reserved3             154
+#define __NR_HPUX_lockf                 155
+#define __NR_HPUX_semget                156
+#define __NR_HPUX_osemctl               157
+#define __NR_HPUX_semop                 158
+#define __NR_HPUX_msgget                159
+#define __NR_HPUX_omsgctl               160
+#define __NR_HPUX_msgsnd                161
+#define __NR_HPUX_msgrecv               162
+#define __NR_HPUX_shmget                163
+#define __NR_HPUX_oshmctl               164
+#define __NR_HPUX_shmat                 165
+#define __NR_HPUX_shmdt                 166
+#define __NR_HPUX_m68020_advise         167
+/* [168,189] are for Discless/DUX */
+#define __NR_HPUX_csp                   168
+#define __NR_HPUX_cluster               169
+#define __NR_HPUX_mkrnod                170
+#define __NR_HPUX_test                  171
+#define __NR_HPUX_unsp_open             172
+#define __NR_HPUX_reserved4             173
+#define __NR_HPUX_getcontext_old        174
+#define __NR_HPUX_osetcontext           175
+#define __NR_HPUX_bigio                 176
+#define __NR_HPUX_pipenode              177
+#define __NR_HPUX_lsync                 178
+#define __NR_HPUX_getmachineid          179
+#define __NR_HPUX_cnodeid               180
+#define __NR_HPUX_cnodes                181
+#define __NR_HPUX_swapclients           182
+#define __NR_HPUX_rmt_process           183
+#define __NR_HPUX_dskless_stats         184
+#define __NR_HPUX_sigprocmask           185
+#define __NR_HPUX_sigpending            186
+#define __NR_HPUX_sigsuspend            187
+#define __NR_HPUX_sigaction             188
+#define __NR_HPUX_reserved5             189
+#define __NR_HPUX_nfssvc                190
+#define __NR_HPUX_getfh                 191
+#define __NR_HPUX_getdomainname         192
+#define __NR_HPUX_setdomainname         193
+#define __NR_HPUX_async_daemon          194
+#define __NR_HPUX_getdirentries         195
+#define __NR_HPUX_statfs                196
+#define __NR_HPUX_fstatfs               197
+#define __NR_HPUX_vfsmount              198
+#define __NR_HPUX_reserved6             199
+#define __NR_HPUX_waitpid               200
+/* 201 - 223 missing */
+#define __NR_HPUX_sigsetreturn          224
+#define __NR_HPUX_sigsetstatemask       225
+/* 226 missing */
+#define __NR_HPUX_cs                    227
+#define __NR_HPUX_cds                   228
+#define __NR_HPUX_set_no_trunc          229
+#define __NR_HPUX_pathconf              230
+#define __NR_HPUX_fpathconf             231
+/* 232, 233 missing */
+#define __NR_HPUX_nfs_fcntl             234
+#define __NR_HPUX_ogetacl               235
+#define __NR_HPUX_ofgetacl              236
+#define __NR_HPUX_osetacl               237
+#define __NR_HPUX_ofsetacl              238
+#define __NR_HPUX_pstat                 239
+#define __NR_HPUX_getaudid              240
+#define __NR_HPUX_setaudid              241
+#define __NR_HPUX_getaudproc            242
+#define __NR_HPUX_setaudproc            243
+#define __NR_HPUX_getevent              244
+#define __NR_HPUX_setevent              245
+#define __NR_HPUX_audwrite              246
+#define __NR_HPUX_audswitch             247
+#define __NR_HPUX_audctl                248
+#define __NR_HPUX_ogetaccess            249
+#define __NR_HPUX_fsctl                 250
+/* 251 - 258 missing */
+#define __NR_HPUX_swapfs                259
+#define __NR_HPUX_fss                   260
+/* 261 - 266 missing */
+#define __NR_HPUX_tsync                 267
+#define __NR_HPUX_getnumfds             268
+#define __NR_HPUX_poll                  269
+#define __NR_HPUX_getmsg                270
+#define __NR_HPUX_putmsg                271
+#define __NR_HPUX_fchdir                272
+#define __NR_HPUX_getmount_cnt          273
+#define __NR_HPUX_getmount_entry        274
+#define __NR_HPUX_accept                275
+#define __NR_HPUX_bind                  276
+#define __NR_HPUX_connect               277
+#define __NR_HPUX_getpeername           278
+#define __NR_HPUX_getsockname           279
+#define __NR_HPUX_getsockopt            280
+#define __NR_HPUX_listen                281
+#define __NR_HPUX_recv                  282
+#define __NR_HPUX_recvfrom              283
+#define __NR_HPUX_recvmsg               284
+#define __NR_HPUX_send                  285
+#define __NR_HPUX_sendmsg               286
+#define __NR_HPUX_sendto                287
+#define __NR_HPUX_setsockopt            288
+#define __NR_HPUX_shutdown              289
+#define __NR_HPUX_socket                290
+#define __NR_HPUX_socketpair            291
+#define __NR_HPUX_proc_open             292
+#define __NR_HPUX_proc_close            293
+#define __NR_HPUX_proc_send             294
+#define __NR_HPUX_proc_recv             295
+#define __NR_HPUX_proc_sendrecv         296
+#define __NR_HPUX_proc_syscall          297
+/* 298 - 311 missing */
+#define __NR_HPUX_semctl                312
+#define __NR_HPUX_msgctl                313
+#define __NR_HPUX_shmctl                314
+#define __NR_HPUX_mpctl                 315
+#define __NR_HPUX_exportfs              316
+#define __NR_HPUX_getpmsg               317
+#define __NR_HPUX_putpmsg               318
+/* 319 missing */
+#define __NR_HPUX_msync                 320
+#define __NR_HPUX_msleep                321
+#define __NR_HPUX_mwakeup               322
+#define __NR_HPUX_msem_init             323
+#define __NR_HPUX_msem_remove           324
+#define __NR_HPUX_adjtime               325
+#define __NR_HPUX_kload                 326
+#define __NR_HPUX_fattach               327
+#define __NR_HPUX_fdetach               328
+#define __NR_HPUX_serialize             329
+#define __NR_HPUX_statvfs               330
+#define __NR_HPUX_fstatvfs              331
+#define __NR_HPUX_lchown                332
+#define __NR_HPUX_getsid                333
+#define __NR_HPUX_sysfs                 334
+/* 335, 336 missing */
+#define __NR_HPUX_sched_setparam        337
+#define __NR_HPUX_sched_getparam        338
+#define __NR_HPUX_sched_setscheduler    339
+#define __NR_HPUX_sched_getscheduler    340
+#define __NR_HPUX_sched_yield           341
+#define __NR_HPUX_sched_get_priority_max 342
+#define __NR_HPUX_sched_get_priority_min 343
+#define __NR_HPUX_sched_rr_get_interval 344
+#define __NR_HPUX_clock_settime         345
+#define __NR_HPUX_clock_gettime         346
+#define __NR_HPUX_clock_getres          347
+#define __NR_HPUX_timer_create          348
+#define __NR_HPUX_timer_delete          349
+#define __NR_HPUX_timer_settime         350
+#define __NR_HPUX_timer_gettime         351
+#define __NR_HPUX_timer_getoverrun      352
+#define __NR_HPUX_nanosleep             353
+#define __NR_HPUX_toolbox               354
+/* 355 missing */
+#define __NR_HPUX_getdents              356
+#define __NR_HPUX_getcontext            357
+#define __NR_HPUX_sysinfo               358
+#define __NR_HPUX_fcntl64               359
+#define __NR_HPUX_ftruncate64           360
+#define __NR_HPUX_fstat64               361
+#define __NR_HPUX_getdirentries64       362
+#define __NR_HPUX_getrlimit64           363
+#define __NR_HPUX_lockf64               364
+#define __NR_HPUX_lseek64               365
+#define __NR_HPUX_lstat64               366
+#define __NR_HPUX_mmap64                367
+#define __NR_HPUX_setrlimit64           368
+#define __NR_HPUX_stat64                369
+#define __NR_HPUX_truncate64            370
+#define __NR_HPUX_ulimit64              371
+#define __NR_HPUX_pread                 372
+#define __NR_HPUX_preadv                373
+#define __NR_HPUX_pwrite                374
+#define __NR_HPUX_pwritev               375
+#define __NR_HPUX_pread64               376
+#define __NR_HPUX_preadv64              377
+#define __NR_HPUX_pwrite64              378
+#define __NR_HPUX_pwritev64             379
+#define __NR_HPUX_setcontext            380
+#define __NR_HPUX_sigaltstack           381
+#define __NR_HPUX_waitid                382
+#define __NR_HPUX_setpgrp               383
+#define __NR_HPUX_recvmsg2              384
+#define __NR_HPUX_sendmsg2              385
+#define __NR_HPUX_socket2               386
+#define __NR_HPUX_socketpair2           387
+#define __NR_HPUX_setregid              388
+#define __NR_HPUX_lwp_create            389
+#define __NR_HPUX_lwp_terminate         390
+#define __NR_HPUX_lwp_wait              391
+#define __NR_HPUX_lwp_suspend           392
+#define __NR_HPUX_lwp_resume            393
+/* 394 missing */
+#define __NR_HPUX_lwp_abort_syscall     395
+#define __NR_HPUX_lwp_info              396
+#define __NR_HPUX_lwp_kill              397
+#define __NR_HPUX_ksleep                398
+#define __NR_HPUX_kwakeup               399
+/* 400 missing */
+#define __NR_HPUX_pstat_getlwp          401
+#define __NR_HPUX_lwp_exit              402
+#define __NR_HPUX_lwp_continue          403
+#define __NR_HPUX_getacl                404
+#define __NR_HPUX_fgetacl               405
+#define __NR_HPUX_setacl                406
+#define __NR_HPUX_fsetacl               407
+#define __NR_HPUX_getaccess             408
+#define __NR_HPUX_lwp_mutex_init        409
+#define __NR_HPUX_lwp_mutex_lock_sys    410
+#define __NR_HPUX_lwp_mutex_unlock      411
+#define __NR_HPUX_lwp_cond_init         412
+#define __NR_HPUX_lwp_cond_signal       413
+#define __NR_HPUX_lwp_cond_broadcast    414
+#define __NR_HPUX_lwp_cond_wait_sys     415
+#define __NR_HPUX_lwp_getscheduler      416
+#define __NR_HPUX_lwp_setscheduler      417
+#define __NR_HPUX_lwp_getstate          418
+#define __NR_HPUX_lwp_setstate          419
+#define __NR_HPUX_lwp_detach            420
+#define __NR_HPUX_mlock                 421
+#define __NR_HPUX_munlock               422
+#define __NR_HPUX_mlockall              423
+#define __NR_HPUX_munlockall            424
+#define __NR_HPUX_shm_open              425
+#define __NR_HPUX_shm_unlink            426
+#define __NR_HPUX_sigqueue              427
+#define __NR_HPUX_sigwaitinfo           428
+#define __NR_HPUX_sigtimedwait          429
+#define __NR_HPUX_sigwait               430
+#define __NR_HPUX_aio_read              431
+#define __NR_HPUX_aio_write             432
+#define __NR_HPUX_lio_listio            433
+#define __NR_HPUX_aio_error             434
+#define __NR_HPUX_aio_return            435
+#define __NR_HPUX_aio_cancel            436
+#define __NR_HPUX_aio_suspend           437
+#define __NR_HPUX_aio_fsync             438
+#define __NR_HPUX_mq_open               439
+#define __NR_HPUX_mq_close              440
+#define __NR_HPUX_mq_unlink             441
+#define __NR_HPUX_mq_send               442
+#define __NR_HPUX_mq_receive            443
+#define __NR_HPUX_mq_notify             444
+#define __NR_HPUX_mq_setattr            445
+#define __NR_HPUX_mq_getattr            446
+#define __NR_HPUX_ksem_open             447
+#define __NR_HPUX_ksem_unlink           448
+#define __NR_HPUX_ksem_close            449
+#define __NR_HPUX_ksem_post             450
+#define __NR_HPUX_ksem_wait             451
+#define __NR_HPUX_ksem_read             452
+#define __NR_HPUX_ksem_trywait          453
+#define __NR_HPUX_lwp_rwlock_init       454
+#define __NR_HPUX_lwp_rwlock_destroy    455
+#define __NR_HPUX_lwp_rwlock_rdlock_sys 456
+#define __NR_HPUX_lwp_rwlock_wrlock_sys 457
+#define __NR_HPUX_lwp_rwlock_tryrdlock  458
+#define __NR_HPUX_lwp_rwlock_trywrlock  459
+#define __NR_HPUX_lwp_rwlock_unlock     460
+#define __NR_HPUX_ttrace                461
+#define __NR_HPUX_ttrace_wait           462
+#define __NR_HPUX_lf_wire_mem           463
+#define __NR_HPUX_lf_unwire_mem         464
+#define __NR_HPUX_lf_send_pin_map       465
+#define __NR_HPUX_lf_free_buf           466
+#define __NR_HPUX_lf_wait_nq            467
+#define __NR_HPUX_lf_wakeup_conn_q      468
+#define __NR_HPUX_lf_unused             469
+#define __NR_HPUX_lwp_sema_init         470
+#define __NR_HPUX_lwp_sema_post         471
+#define __NR_HPUX_lwp_sema_wait         472
+#define __NR_HPUX_lwp_sema_trywait      473
+#define __NR_HPUX_lwp_sema_destroy      474
+#define __NR_HPUX_statvfs64             475
+#define __NR_HPUX_fstatvfs64            476
+#define __NR_HPUX_msh_register          477
+#define __NR_HPUX_ptrace64              478
+#define __NR_HPUX_sendfile              479
+#define __NR_HPUX_sendpath              480
+#define __NR_HPUX_sendfile64            481
+#define __NR_HPUX_sendpath64            482
+#define __NR_HPUX_modload               483
+#define __NR_HPUX_moduload              484
+#define __NR_HPUX_modpath               485
+#define __NR_HPUX_getksym               486
+#define __NR_HPUX_modadm                487
+#define __NR_HPUX_modstat               488
+#define __NR_HPUX_lwp_detached_exit     489
+#define __NR_HPUX_crashconf             490
+#define __NR_HPUX_siginhibit            491
+#define __NR_HPUX_sigenable             492
+#define __NR_HPUX_spuctl                493
+#define __NR_HPUX_zerokernelsum         494
+#define __NR_HPUX_nfs_kstat             495
+#define __NR_HPUX_aio_read64            496
+#define __NR_HPUX_aio_write64           497
+#define __NR_HPUX_aio_error64           498
+#define __NR_HPUX_aio_return64          499
+#define __NR_HPUX_aio_cancel64          500
+#define __NR_HPUX_aio_suspend64         501
+#define __NR_HPUX_aio_fsync64           502
+#define __NR_HPUX_lio_listio64          503
+#define __NR_HPUX_recv2                 504
+#define __NR_HPUX_recvfrom2             505
+#define __NR_HPUX_send2                 506
+#define __NR_HPUX_sendto2               507
+#define __NR_HPUX_acl                   508
+#define __NR_HPUX___cnx_p2p_ctl         509
+#define __NR_HPUX___cnx_gsched_ctl      510
+#define __NR_HPUX___cnx_pmon_ctl        511
+
+#define __NR_HPUX_syscalls		512
+
+/*
+ * Linux system call numbers.
+ *
+ * Cary Coutant says that we should just use another syscall gateway
+ * page to avoid clashing with the HPUX space, and I think he's right:
+ * it will would keep a branch out of our syscall entry path, at the
+ * very least.  If we decide to change it later, we can ``just'' tweak
+ * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be
+ * 1024 or something.  Oh, and recompile libc. =)
+ *
+ * 64-bit HPUX binaries get the syscall gateway address passed in a register
+ * from the kernel at startup, which seems a sane strategy.
+ */
+
+#define __NR_Linux                0
+#define __NR_restart_syscall      (__NR_Linux + 0)
+#define __NR_exit                 (__NR_Linux + 1)
+#define __NR_fork                 (__NR_Linux + 2)
+#define __NR_read                 (__NR_Linux + 3)
+#define __NR_write                (__NR_Linux + 4)
+#define __NR_open                 (__NR_Linux + 5)
+#define __NR_close                (__NR_Linux + 6)
+#define __NR_waitpid              (__NR_Linux + 7)
+#define __NR_creat                (__NR_Linux + 8)
+#define __NR_link                 (__NR_Linux + 9)
+#define __NR_unlink              (__NR_Linux + 10)
+#define __NR_execve              (__NR_Linux + 11)
+#define __NR_chdir               (__NR_Linux + 12)
+#define __NR_time                (__NR_Linux + 13)
+#define __NR_mknod               (__NR_Linux + 14)
+#define __NR_chmod               (__NR_Linux + 15)
+#define __NR_lchown              (__NR_Linux + 16)
+#define __NR_socket              (__NR_Linux + 17)
+#define __NR_stat                (__NR_Linux + 18)
+#define __NR_lseek               (__NR_Linux + 19)
+#define __NR_getpid              (__NR_Linux + 20)
+#define __NR_mount               (__NR_Linux + 21)
+#define __NR_bind                (__NR_Linux + 22)
+#define __NR_setuid              (__NR_Linux + 23)
+#define __NR_getuid              (__NR_Linux + 24)
+#define __NR_stime               (__NR_Linux + 25)
+#define __NR_ptrace              (__NR_Linux + 26)
+#define __NR_alarm               (__NR_Linux + 27)
+#define __NR_fstat               (__NR_Linux + 28)
+#define __NR_pause               (__NR_Linux + 29)
+#define __NR_utime               (__NR_Linux + 30)
+#define __NR_connect             (__NR_Linux + 31)
+#define __NR_listen              (__NR_Linux + 32)
+#define __NR_access              (__NR_Linux + 33)
+#define __NR_nice                (__NR_Linux + 34)
+#define __NR_accept              (__NR_Linux + 35)
+#define __NR_sync                (__NR_Linux + 36)
+#define __NR_kill                (__NR_Linux + 37)
+#define __NR_rename              (__NR_Linux + 38)
+#define __NR_mkdir               (__NR_Linux + 39)
+#define __NR_rmdir               (__NR_Linux + 40)
+#define __NR_dup                 (__NR_Linux + 41)
+#define __NR_pipe                (__NR_Linux + 42)
+#define __NR_times               (__NR_Linux + 43)
+#define __NR_getsockname         (__NR_Linux + 44)
+#define __NR_brk                 (__NR_Linux + 45)
+#define __NR_setgid              (__NR_Linux + 46)
+#define __NR_getgid              (__NR_Linux + 47)
+#define __NR_signal              (__NR_Linux + 48)
+#define __NR_geteuid             (__NR_Linux + 49)
+#define __NR_getegid             (__NR_Linux + 50)
+#define __NR_acct                (__NR_Linux + 51)
+#define __NR_umount2             (__NR_Linux + 52)
+#define __NR_getpeername         (__NR_Linux + 53)
+#define __NR_ioctl               (__NR_Linux + 54)
+#define __NR_fcntl               (__NR_Linux + 55)
+#define __NR_socketpair          (__NR_Linux + 56)
+#define __NR_setpgid             (__NR_Linux + 57)
+#define __NR_send                (__NR_Linux + 58)
+#define __NR_uname               (__NR_Linux + 59)
+#define __NR_umask               (__NR_Linux + 60)
+#define __NR_chroot              (__NR_Linux + 61)
+#define __NR_ustat               (__NR_Linux + 62)
+#define __NR_dup2                (__NR_Linux + 63)
+#define __NR_getppid             (__NR_Linux + 64)
+#define __NR_getpgrp             (__NR_Linux + 65)
+#define __NR_setsid              (__NR_Linux + 66)
+#define __NR_pivot_root          (__NR_Linux + 67)
+#define __NR_sgetmask            (__NR_Linux + 68)
+#define __NR_ssetmask            (__NR_Linux + 69)
+#define __NR_setreuid            (__NR_Linux + 70)
+#define __NR_setregid            (__NR_Linux + 71)
+#define __NR_mincore             (__NR_Linux + 72)
+#define __NR_sigpending          (__NR_Linux + 73)
+#define __NR_sethostname         (__NR_Linux + 74)
+#define __NR_setrlimit           (__NR_Linux + 75)
+#define __NR_getrlimit           (__NR_Linux + 76)
+#define __NR_getrusage           (__NR_Linux + 77)
+#define __NR_gettimeofday        (__NR_Linux + 78)
+#define __NR_settimeofday        (__NR_Linux + 79)
+#define __NR_getgroups           (__NR_Linux + 80)
+#define __NR_setgroups           (__NR_Linux + 81)
+#define __NR_sendto              (__NR_Linux + 82)
+#define __NR_symlink             (__NR_Linux + 83)
+#define __NR_lstat               (__NR_Linux + 84)
+#define __NR_readlink            (__NR_Linux + 85)
+#define __NR_uselib              (__NR_Linux + 86)
+#define __NR_swapon              (__NR_Linux + 87)
+#define __NR_reboot              (__NR_Linux + 88)
+#define __NR_mmap2             (__NR_Linux + 89)
+#define __NR_mmap                (__NR_Linux + 90)
+#define __NR_munmap              (__NR_Linux + 91)
+#define __NR_truncate            (__NR_Linux + 92)
+#define __NR_ftruncate           (__NR_Linux + 93)
+#define __NR_fchmod              (__NR_Linux + 94)
+#define __NR_fchown              (__NR_Linux + 95)
+#define __NR_getpriority         (__NR_Linux + 96)
+#define __NR_setpriority         (__NR_Linux + 97)
+#define __NR_recv                (__NR_Linux + 98)
+#define __NR_statfs              (__NR_Linux + 99)
+#define __NR_fstatfs            (__NR_Linux + 100)
+#define __NR_stat64           (__NR_Linux + 101)
+/* #define __NR_socketcall         (__NR_Linux + 102) */
+#define __NR_syslog             (__NR_Linux + 103)
+#define __NR_setitimer          (__NR_Linux + 104)
+#define __NR_getitimer          (__NR_Linux + 105)
+#define __NR_capget             (__NR_Linux + 106)
+#define __NR_capset             (__NR_Linux + 107)
+#define __NR_pread64            (__NR_Linux + 108)
+#define __NR_pwrite64           (__NR_Linux + 109)
+#define __NR_getcwd             (__NR_Linux + 110)
+#define __NR_vhangup            (__NR_Linux + 111)
+#define __NR_fstat64            (__NR_Linux + 112)
+#define __NR_vfork              (__NR_Linux + 113)
+#define __NR_wait4              (__NR_Linux + 114)
+#define __NR_swapoff            (__NR_Linux + 115)
+#define __NR_sysinfo            (__NR_Linux + 116)
+#define __NR_shutdown           (__NR_Linux + 117)
+#define __NR_fsync              (__NR_Linux + 118)
+#define __NR_madvise            (__NR_Linux + 119)
+#define __NR_clone              (__NR_Linux + 120)
+#define __NR_setdomainname      (__NR_Linux + 121)
+#define __NR_sendfile           (__NR_Linux + 122)
+#define __NR_recvfrom           (__NR_Linux + 123)
+#define __NR_adjtimex           (__NR_Linux + 124)
+#define __NR_mprotect           (__NR_Linux + 125)
+#define __NR_sigprocmask        (__NR_Linux + 126)
+#define __NR_create_module      (__NR_Linux + 127)
+#define __NR_init_module        (__NR_Linux + 128)
+#define __NR_delete_module      (__NR_Linux + 129)
+#define __NR_get_kernel_syms    (__NR_Linux + 130)
+#define __NR_quotactl           (__NR_Linux + 131)
+#define __NR_getpgid            (__NR_Linux + 132)
+#define __NR_fchdir             (__NR_Linux + 133)
+#define __NR_bdflush            (__NR_Linux + 134)
+#define __NR_sysfs              (__NR_Linux + 135)
+#define __NR_personality        (__NR_Linux + 136)
+#define __NR_afs_syscall        (__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid           (__NR_Linux + 138)
+#define __NR_setfsgid           (__NR_Linux + 139)
+#define __NR__llseek            (__NR_Linux + 140)
+#define __NR_getdents           (__NR_Linux + 141)
+#define __NR__newselect         (__NR_Linux + 142)
+#define __NR_flock              (__NR_Linux + 143)
+#define __NR_msync              (__NR_Linux + 144)
+#define __NR_readv              (__NR_Linux + 145)
+#define __NR_writev             (__NR_Linux + 146)
+#define __NR_getsid             (__NR_Linux + 147)
+#define __NR_fdatasync          (__NR_Linux + 148)
+#define __NR__sysctl            (__NR_Linux + 149)
+#define __NR_mlock              (__NR_Linux + 150)
+#define __NR_munlock            (__NR_Linux + 151)
+#define __NR_mlockall           (__NR_Linux + 152)
+#define __NR_munlockall         (__NR_Linux + 153)
+#define __NR_sched_setparam             (__NR_Linux + 154)
+#define __NR_sched_getparam             (__NR_Linux + 155)
+#define __NR_sched_setscheduler         (__NR_Linux + 156)
+#define __NR_sched_getscheduler         (__NR_Linux + 157)
+#define __NR_sched_yield                (__NR_Linux + 158)
+#define __NR_sched_get_priority_max     (__NR_Linux + 159)
+#define __NR_sched_get_priority_min     (__NR_Linux + 160)
+#define __NR_sched_rr_get_interval      (__NR_Linux + 161)
+#define __NR_nanosleep          (__NR_Linux + 162)
+#define __NR_mremap             (__NR_Linux + 163)
+#define __NR_setresuid          (__NR_Linux + 164)
+#define __NR_getresuid          (__NR_Linux + 165)
+#define __NR_sigaltstack        (__NR_Linux + 166)
+#define __NR_query_module       (__NR_Linux + 167)
+#define __NR_poll               (__NR_Linux + 168)
+#define __NR_nfsservctl         (__NR_Linux + 169)
+#define __NR_setresgid          (__NR_Linux + 170)
+#define __NR_getresgid          (__NR_Linux + 171)
+#define __NR_prctl              (__NR_Linux + 172)
+#define __NR_rt_sigreturn       (__NR_Linux + 173)
+#define __NR_rt_sigaction       (__NR_Linux + 174)
+#define __NR_rt_sigprocmask     (__NR_Linux + 175)
+#define __NR_rt_sigpending      (__NR_Linux + 176)
+#define __NR_rt_sigtimedwait    (__NR_Linux + 177)
+#define __NR_rt_sigqueueinfo    (__NR_Linux + 178)
+#define __NR_rt_sigsuspend      (__NR_Linux + 179)
+#define __NR_chown              (__NR_Linux + 180)
+#define __NR_setsockopt         (__NR_Linux + 181)
+#define __NR_getsockopt         (__NR_Linux + 182)
+#define __NR_sendmsg            (__NR_Linux + 183)
+#define __NR_recvmsg            (__NR_Linux + 184)
+#define __NR_semop              (__NR_Linux + 185)
+#define __NR_semget             (__NR_Linux + 186)
+#define __NR_semctl             (__NR_Linux + 187)
+#define __NR_msgsnd             (__NR_Linux + 188)
+#define __NR_msgrcv             (__NR_Linux + 189)
+#define __NR_msgget             (__NR_Linux + 190)
+#define __NR_msgctl             (__NR_Linux + 191)
+#define __NR_shmat              (__NR_Linux + 192)
+#define __NR_shmdt              (__NR_Linux + 193)
+#define __NR_shmget             (__NR_Linux + 194)
+#define __NR_shmctl             (__NR_Linux + 195)
+
+#define __NR_getpmsg            (__NR_Linux + 196)      /* some people actually want streams */
+#define __NR_putpmsg            (__NR_Linux + 197)      /* some people actually want streams */
+
+#define __NR_lstat64            (__NR_Linux + 198)
+#define __NR_truncate64         (__NR_Linux + 199)
+#define __NR_ftruncate64        (__NR_Linux + 200)
+#define __NR_getdents64         (__NR_Linux + 201)
+#define __NR_fcntl64            (__NR_Linux + 202)
+#define __NR_attrctl            (__NR_Linux + 203)
+#define __NR_acl_get            (__NR_Linux + 204)
+#define __NR_acl_set            (__NR_Linux + 205)
+#define __NR_gettid             (__NR_Linux + 206)
+#define __NR_readahead          (__NR_Linux + 207)
+#define __NR_tkill              (__NR_Linux + 208)
+#define __NR_sendfile64         (__NR_Linux + 209)
+#define __NR_futex              (__NR_Linux + 210)
+#define __NR_sched_setaffinity  (__NR_Linux + 211)
+#define __NR_sched_getaffinity  (__NR_Linux + 212)
+#define __NR_set_thread_area    (__NR_Linux + 213)
+#define __NR_get_thread_area    (__NR_Linux + 214)
+#define __NR_io_setup           (__NR_Linux + 215)
+#define __NR_io_destroy         (__NR_Linux + 216)
+#define __NR_io_getevents       (__NR_Linux + 217)
+#define __NR_io_submit          (__NR_Linux + 218)
+#define __NR_io_cancel          (__NR_Linux + 219)
+#define __NR_alloc_hugepages    (__NR_Linux + 220)
+#define __NR_free_hugepages     (__NR_Linux + 221)
+#define __NR_exit_group         (__NR_Linux + 222)
+#define __NR_lookup_dcookie     (__NR_Linux + 223)
+#define __NR_epoll_create       (__NR_Linux + 224)
+#define __NR_epoll_ctl          (__NR_Linux + 225)
+#define __NR_epoll_wait         (__NR_Linux + 226)
+#define __NR_remap_file_pages   (__NR_Linux + 227)
+#define __NR_semtimedop         (__NR_Linux + 228)
+#define __NR_mq_open            (__NR_Linux + 229)
+#define __NR_mq_unlink          (__NR_Linux + 230)
+#define __NR_mq_timedsend       (__NR_Linux + 231)
+#define __NR_mq_timedreceive    (__NR_Linux + 232)
+#define __NR_mq_notify          (__NR_Linux + 233)
+#define __NR_mq_getsetattr      (__NR_Linux + 234)
+#define __NR_waitid		(__NR_Linux + 235)
+#define __NR_fadvise64_64	(__NR_Linux + 236)
+#define __NR_set_tid_address	(__NR_Linux + 237)
+#define __NR_setxattr		(__NR_Linux + 238)
+#define __NR_lsetxattr		(__NR_Linux + 239)
+#define __NR_fsetxattr		(__NR_Linux + 240)
+#define __NR_getxattr		(__NR_Linux + 241)
+#define __NR_lgetxattr		(__NR_Linux + 242)
+#define __NR_fgetxattr		(__NR_Linux + 243)
+#define __NR_listxattr		(__NR_Linux + 244)
+#define __NR_llistxattr		(__NR_Linux + 245)
+#define __NR_flistxattr		(__NR_Linux + 246)
+#define __NR_removexattr	(__NR_Linux + 247)
+#define __NR_lremovexattr	(__NR_Linux + 248)
+#define __NR_fremovexattr	(__NR_Linux + 249)
+#define __NR_timer_create	(__NR_Linux + 250)
+#define __NR_timer_settime	(__NR_Linux + 251)
+#define __NR_timer_gettime	(__NR_Linux + 252)
+#define __NR_timer_getoverrun	(__NR_Linux + 253)
+#define __NR_timer_delete	(__NR_Linux + 254)
+#define __NR_clock_settime	(__NR_Linux + 255)
+#define __NR_clock_gettime	(__NR_Linux + 256)
+#define __NR_clock_getres	(__NR_Linux + 257)
+#define __NR_clock_nanosleep	(__NR_Linux + 258)
+#define __NR_tgkill		(__NR_Linux + 259)
+#define __NR_mbind		(__NR_Linux + 260)
+#define __NR_get_mempolicy	(__NR_Linux + 261)
+#define __NR_set_mempolicy	(__NR_Linux + 262)
+
+#define __NR_Linux_syscalls     263
+
+#define HPUX_GATEWAY_ADDR       0xC0000004
+#define LINUX_GATEWAY_ADDR      0x100
+
+#ifndef __ASSEMBLY__
+
+#define SYS_ify(syscall_name)   __NR_##syscall_name
+
+/* Assume all syscalls are done from PIC code just to be
+ * safe. The worst case scenario is that you lose a register
+ * and save/restore r19 across the syscall. */
+#define PIC
+
+#ifndef ASM_LINE_SEP
+# define ASM_LINE_SEP ;
+#endif
+
+/* Definition taken from glibc 2.3.3
+ * sysdeps/unix/sysv/linux/hppa/sysdep.h
+ */
+
+#ifdef PIC
+/* WARNING: CANNOT BE USED IN A NOP! */
+# define K_STW_ASM_PIC	"       copy %%r19, %%r4\n"
+# define K_LDW_ASM_PIC	"       copy %%r4, %%r19\n"
+# define K_USING_GR4	"%r4",
+#else
+# define K_STW_ASM_PIC	" \n"
+# define K_LDW_ASM_PIC	" \n"
+# define K_USING_GR4
+#endif
+
+/* GCC has to be warned that a syscall may clobber all the ABI
+   registers listed as "caller-saves", see page 8, Table 2
+   in section 2.2.6 of the PA-RISC RUN-TIME architecture
+   document. However! r28 is the result and will conflict with
+   the clobber list so it is left out. Also the input arguments
+   registers r20 -> r26 will conflict with the list so they
+   are treated specially. Although r19 is clobbered by the syscall
+   we cannot say this because it would violate ABI, thus we say
+   r4 is clobbered and use that register to save/restore r19
+   across the syscall. */
+
+#define K_CALL_CLOB_REGS "%r1", "%r2", K_USING_GR4 \
+	        	 "%r20", "%r29", "%r31"
+
+#undef K_INLINE_SYSCALL
+#define K_INLINE_SYSCALL(name, nr, args...)	({			\
+	long __sys_res;							\
+	{								\
+		register unsigned long __res asm("r28");		\
+		K_LOAD_ARGS_##nr(args)					\
+		/* FIXME: HACK stw/ldw r19 around syscall */		\
+		asm volatile(						\
+			K_STW_ASM_PIC					\
+			"	ble  0x100(%%sr2, %%r0)\n"		\
+			"	ldi %1, %%r20\n"			\
+			K_LDW_ASM_PIC					\
+			: "=r" (__res)					\
+			: "i" (SYS_ify(name)) K_ASM_ARGS_##nr   	\
+			: "memory", K_CALL_CLOB_REGS K_CLOB_ARGS_##nr	\
+		);							\
+		__sys_res = (long)__res;				\
+	}								\
+	if ( (unsigned long)__sys_res >= (unsigned long)-4095 ){	\
+		errno = -__sys_res;		        		\
+		__sys_res = -1;						\
+	}								\
+	__sys_res;							\
+})
+
+#define K_LOAD_ARGS_0()
+#define K_LOAD_ARGS_1(r26)					\
+	register unsigned long __r26 __asm__("r26") = (unsigned long)(r26);   \
+	K_LOAD_ARGS_0()
+#define K_LOAD_ARGS_2(r26,r25)					\
+	register unsigned long __r25 __asm__("r25") = (unsigned long)(r25);   \
+	K_LOAD_ARGS_1(r26)
+#define K_LOAD_ARGS_3(r26,r25,r24)				\
+	register unsigned long __r24 __asm__("r24") = (unsigned long)(r24);   \
+	K_LOAD_ARGS_2(r26,r25)
+#define K_LOAD_ARGS_4(r26,r25,r24,r23)				\
+	register unsigned long __r23 __asm__("r23") = (unsigned long)(r23);   \
+	K_LOAD_ARGS_3(r26,r25,r24)
+#define K_LOAD_ARGS_5(r26,r25,r24,r23,r22)			\
+	register unsigned long __r22 __asm__("r22") = (unsigned long)(r22);   \
+	K_LOAD_ARGS_4(r26,r25,r24,r23)
+#define K_LOAD_ARGS_6(r26,r25,r24,r23,r22,r21)			\
+	register unsigned long __r21 __asm__("r21") = (unsigned long)(r21);   \
+	K_LOAD_ARGS_5(r26,r25,r24,r23,r22)
+
+/* Even with zero args we use r20 for the syscall number */
+#define K_ASM_ARGS_0
+#define K_ASM_ARGS_1 K_ASM_ARGS_0, "r" (__r26)
+#define K_ASM_ARGS_2 K_ASM_ARGS_1, "r" (__r25)
+#define K_ASM_ARGS_3 K_ASM_ARGS_2, "r" (__r24)
+#define K_ASM_ARGS_4 K_ASM_ARGS_3, "r" (__r23)
+#define K_ASM_ARGS_5 K_ASM_ARGS_4, "r" (__r22)
+#define K_ASM_ARGS_6 K_ASM_ARGS_5, "r" (__r21)
+
+/* The registers not listed as inputs but clobbered */
+#define K_CLOB_ARGS_6
+#define K_CLOB_ARGS_5 K_CLOB_ARGS_6, "%r21"
+#define K_CLOB_ARGS_4 K_CLOB_ARGS_5, "%r22"
+#define K_CLOB_ARGS_3 K_CLOB_ARGS_4, "%r23"
+#define K_CLOB_ARGS_2 K_CLOB_ARGS_3, "%r24"
+#define K_CLOB_ARGS_1 K_CLOB_ARGS_2, "%r25"
+#define K_CLOB_ARGS_0 K_CLOB_ARGS_1, "%r26"
+
+#define _syscall0(type,name)						\
+type name(void)								\
+{									\
+    return K_INLINE_SYSCALL(name, 0);	                                \
+}
+
+#define _syscall1(type,name,type1,arg1)					\
+type name(type1 arg1)							\
+{									\
+    return K_INLINE_SYSCALL(name, 1, arg1);	                        \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1, type2 arg2)					\
+{									\
+    return K_INLINE_SYSCALL(name, 2, arg1, arg2);	                \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1, type2 arg2, type3 arg3)				\
+{									\
+    return K_INLINE_SYSCALL(name, 3, arg1, arg2, arg3);	                \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4)		\
+{									\
+    return K_INLINE_SYSCALL(name, 4, arg1, arg2, arg3, arg4);	        \
+}
+
+/* select takes 5 arguments */
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5)	\
+{									\
+    return K_INLINE_SYSCALL(name, 5, arg1, arg2, arg3, arg4, arg5);	\
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+/* mmap & mmap2 take 6 arguments */
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
+{									        \
+    return K_INLINE_SYSCALL(name, 6, arg1, arg2, arg3, arg4, arg5, arg6);	\
+}
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <asm/current.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/syscalls.h>
+
+static inline pid_t setsid(void)
+{
+	return sys_setsid();
+}
+
+static inline int write(int fd, const char *buf, off_t count)
+{
+	return sys_write(fd, buf, count);
+}
+
+static inline int read(int fd, char *buf, off_t count)
+{
+	return sys_read(fd, buf, count);
+}
+
+static inline off_t lseek(int fd, off_t offset, int count)
+{
+	return sys_lseek(fd, offset, count);
+}
+
+static inline int dup(int fd)
+{
+	return sys_dup(fd);
+}
+
+static inline int execve(char *filename, char * argv [],
+	char * envp[])
+{
+	extern int __execve(char *, char **, char **, struct task_struct *);
+	return __execve(filename, argv, envp, current);
+}
+
+static inline int open(const char *file, int flag, int mode)
+{
+	return sys_open(file, flag, mode);
+}
+
+static inline int close(int fd)
+{
+	return sys_close(fd);
+}
+
+static inline void _exit(int exitcode)
+{
+	sys_exit(exitcode);
+}
+
+static inline pid_t waitpid(pid_t pid, int *wait_stat, int options)
+{
+	return sys_wait4(pid, wait_stat, options, NULL);
+}
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+				unsigned long prot, unsigned long flags,
+				unsigned long fd, unsigned long offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len,
+				unsigned long prot, unsigned long flags,
+				unsigned long fd, unsigned long pgoff);
+struct pt_regs;
+asmlinkage int sys_execve(struct pt_regs *regs);
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+		struct pt_regs *regs);
+int sys_vfork(struct pt_regs *regs);
+int sys_pipe(int *fildes);
+long sys_ptrace(long request, pid_t pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif	/* __KERNEL_SYSCALLS__ */
+
+#endif /* __ASSEMBLY__ */
+
+#undef STR
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _ASM_PARISC_UNISTD_H_ */
diff --git a/include/asm-parisc/unwind.h b/include/asm-parisc/unwind.h
new file mode 100644
index 000000000000..2f7e6e50a158
--- /dev/null
+++ b/include/asm-parisc/unwind.h
@@ -0,0 +1,77 @@
+#ifndef _UNWIND_H_
+#define _UNWIND_H_
+
+#include <linux/list.h>
+
+/* From ABI specifications */
+struct unwind_table_entry {
+	unsigned int region_start;
+	unsigned int region_end;
+	unsigned int Cannot_unwind:1; /* 0 */
+	unsigned int Millicode:1;	/* 1 */
+	unsigned int Millicode_save_sr0:1;	/* 2 */
+	unsigned int Region_description:2;	/* 3..4 */
+	unsigned int reserved1:1;	/* 5 */
+	unsigned int Entry_SR:1;	/* 6 */
+	unsigned int Entry_FR:4;	/* number saved *//* 7..10 */
+	unsigned int Entry_GR:5;	/* number saved *//* 11..15 */
+	unsigned int Args_stored:1;	/* 16 */
+	unsigned int Variable_Frame:1;	/* 17 */
+	unsigned int Separate_Package_Body:1;	/* 18 */
+	unsigned int Frame_Extension_Millicode:1;	/* 19 */
+	unsigned int Stack_Overflow_Check:1;	/* 20 */
+	unsigned int Two_Instruction_SP_Increment:1;	/* 21 */
+	unsigned int Ada_Region:1;	/* 22 */
+	unsigned int cxx_info:1;	/* 23 */
+	unsigned int cxx_try_catch:1;	/* 24 */
+	unsigned int sched_entry_seq:1;	/* 25 */
+	unsigned int reserved2:1;	/* 26 */
+	unsigned int Save_SP:1;	/* 27 */
+	unsigned int Save_RP:1;	/* 28 */
+	unsigned int Save_MRP_in_frame:1;	/* 29 */
+	unsigned int extn_ptr_defined:1;	/* 30 */
+	unsigned int Cleanup_defined:1;	/* 31 */
+	
+	unsigned int MPE_XL_interrupt_marker:1;	/* 0 */
+	unsigned int HP_UX_interrupt_marker:1;	/* 1 */
+	unsigned int Large_frame:1;	/* 2 */
+	unsigned int Pseudo_SP_Set:1;	/* 3 */
+	unsigned int reserved4:1;	/* 4 */
+	unsigned int Total_frame_size:27;	/* 5..31 */
+};
+
+struct unwind_table {
+	struct list_head list;
+	const char *name;
+	unsigned long gp;
+	unsigned long base_addr;
+	unsigned long start;
+	unsigned long end;
+	const struct unwind_table_entry *table;
+	unsigned long length;
+};
+
+struct unwind_frame_info {
+	struct task_struct *t;
+	/* Eventually we would like to be able to get at any of the registers
+	   available; but for now we only try to get the sp and ip for each
+	   frame */
+	/* struct pt_regs regs; */
+	unsigned long sp, ip, rp, r31;
+	unsigned long prev_sp, prev_ip;
+};
+
+struct unwind_table *
+unwind_table_add(const char *name, unsigned long base_addr, 
+		 unsigned long gp, void *start, void *end);
+void
+unwind_table_remove(struct unwind_table *table);
+
+void unwind_frame_init(struct unwind_frame_info *info, struct task_struct *t, 
+		       struct pt_regs *regs);
+void unwind_frame_init_from_blocked_task(struct unwind_frame_info *info, struct task_struct *t);
+void unwind_frame_init_running(struct unwind_frame_info *info, struct pt_regs *regs);
+int unwind_once(struct unwind_frame_info *info);
+int unwind_to_user(struct unwind_frame_info *info);
+
+#endif
diff --git a/include/asm-parisc/user.h b/include/asm-parisc/user.h
new file mode 100644
index 000000000000..80224753e508
--- /dev/null
+++ b/include/asm-parisc/user.h
@@ -0,0 +1,5 @@
+/* This file should not exist, but lots of generic code still includes
+   it. It's a hangover from old a.out days and the traditional core
+   dump format.  We are ELF-only, and so are our core dumps.  If we
+   need to support HP/UX core format then we'll do it here
+   eventually. */
diff --git a/include/asm-parisc/xor.h b/include/asm-parisc/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-parisc/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-ppc/8253pit.h b/include/asm-ppc/8253pit.h
new file mode 100644
index 000000000000..285f78488ccb
--- /dev/null
+++ b/include/asm-ppc/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193182UL
+
+#endif
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
new file mode 100644
index 000000000000..1311cefdfd30
--- /dev/null
+++ b/include/asm-ppc/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions.  It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try.  -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef	struct sys_conf {
+	uint	sc_siumcr;
+	uint	sc_sypcr;
+	uint	sc_swt;
+	char	res1[2];
+	ushort	sc_swsr;
+	uint	sc_sipend;
+	uint	sc_simask;
+	uint	sc_siel;
+	uint	sc_sivec;
+	uint	sc_tesr;
+	char	res2[0xc];
+	uint	sc_sdcr;
+	char	res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+	uint	pcmc_pbr0;
+	uint	pcmc_por0;
+	uint	pcmc_pbr1;
+	uint	pcmc_por1;
+	uint	pcmc_pbr2;
+	uint	pcmc_por2;
+	uint	pcmc_pbr3;
+	uint	pcmc_por3;
+	uint	pcmc_pbr4;
+	uint	pcmc_por4;
+	uint	pcmc_pbr5;
+	uint	pcmc_por5;
+	uint	pcmc_pbr6;
+	uint	pcmc_por6;
+	uint	pcmc_pbr7;
+	uint	pcmc_por7;
+	char	res1[0x20];
+	uint	pcmc_pgcra;
+	uint	pcmc_pgcrb;
+	uint	pcmc_pscr;
+	char	res2[4];
+	uint	pcmc_pipr;
+	char	res3[4];
+	uint	pcmc_per;
+	char	res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	uint	memc_br0;
+	uint	memc_or0;
+	uint	memc_br1;
+	uint	memc_or1;
+	uint	memc_br2;
+	uint	memc_or2;
+	uint	memc_br3;
+	uint	memc_or3;
+	uint	memc_br4;
+	uint	memc_or4;
+	uint	memc_br5;
+	uint	memc_or5;
+	uint	memc_br6;
+	uint	memc_or6;
+	uint	memc_br7;
+	uint	memc_or7;
+	char	res1[0x24];
+	uint	memc_mar;
+	uint	memc_mcr;
+	char	res2[4];
+	uint	memc_mamr;
+	uint	memc_mbmr;
+	ushort	memc_mstat;
+	ushort	memc_mptpr;
+	uint	memc_mdr;
+	char	res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register					16-9
+ */
+#define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
+#define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
+#define BR_PS_MSK	0x00000c00	/* Port Size Mask			*/
+#define BR_PS_32	0x00000000	/* 32 bit port size			*/
+#define BR_PS_16	0x00000800	/* 16 bit port size			*/
+#define BR_PS_8		0x00000400	/*  8 bit port size			*/
+#define BR_PARE		0x00000200	/* Parity Enable			*/
+#define BR_WP		0x00000100	/* Write Protect			*/
+#define BR_MS_MSK	0x000000c0	/* Machine Select Mask			*/
+#define BR_MS_GPCM	0x00000000	/* G.P.C.M. Machine Select		*/
+#define BR_MS_UPMA	0x00000080	/* U.P.M.A Machine Select		*/
+#define BR_MS_UPMB	0x000000c0	/* U.P.M.B Machine Select		*/
+#define BR_V		0x00000001	/* Bank Valid				*/
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register				16-11
+ */
+#define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
+#define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
+#define OR_CSNT_SAM	0x00000800	/* Chip Select Negation Time/ Start	*/
+					/* Address Multiplex			*/
+#define OR_ACS_MSK	0x00000600	/* Address to Chip Select Setup mask	*/
+#define OR_ACS_DIV1	0x00000000	/* CS is output at the same time	*/
+#define OR_ACS_DIV4	0x00000400	/* CS is output 1/4 a clock later	*/
+#define OR_ACS_DIV2	0x00000600	/* CS is output 1/2 a clock later	*/
+#define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
+#define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
+#define OR_BI		0x00000100	/* Burst inhibit			*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Lenght in Clocks		*/
+#define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
+#define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
+#define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
+#define OR_SCY_3_CLK	0x00000030	/* 3 clock cycles wait states		*/
+#define OR_SCY_4_CLK	0x00000040	/* 4 clock cycles wait states		*/
+#define OR_SCY_5_CLK	0x00000050	/* 5 clock cycles wait states		*/
+#define OR_SCY_6_CLK	0x00000060	/* 6 clock cycles wait states		*/
+#define OR_SCY_7_CLK	0x00000070	/* 7 clock cycles wait states		*/
+#define OR_SCY_8_CLK	0x00000080	/* 8 clock cycles wait states		*/
+#define OR_SCY_9_CLK	0x00000090	/* 9 clock cycles wait states		*/
+#define OR_SCY_10_CLK	0x000000a0	/* 10 clock cycles wait states		*/
+#define OR_SCY_11_CLK	0x000000b0	/* 11 clock cycles wait states		*/
+#define OR_SCY_12_CLK	0x000000c0	/* 12 clock cycles wait states		*/
+#define OR_SCY_13_CLK	0x000000d0	/* 13 clock cycles wait states		*/
+#define OR_SCY_14_CLK	0x000000e0	/* 14 clock cycles wait states		*/
+#define OR_SCY_15_CLK	0x000000f0	/* 15 clock cycles wait states		*/
+#define OR_SETA		0x00000008	/* External Transfer Acknowledge	*/
+#define OR_TRLX		0x00000004	/* Timing Relaxed			*/
+#define OR_EHTR		0x00000002	/* Extended Hold Time on Read		*/
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	ushort	sit_tbscr;
+	char	res0[0x02];
+	uint	sit_tbreff0;
+	uint	sit_tbreff1;
+	char	res1[0x14];
+	ushort	sit_rtcsc;
+	char	res2[0x02];
+	uint	sit_rtc;
+	uint	sit_rtsec;
+	uint	sit_rtcal;
+	char	res3[0x10];
+	ushort	sit_piscr;
+	char	res4[2];
+	uint	sit_pitc;
+	uint	sit_pitr;
+	char	res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK	((ushort)0xff00)
+#define TBSCR_REFA		((ushort)0x0080)
+#define TBSCR_REFB		((ushort)0x0040)
+#define TBSCR_REFAE		((ushort)0x0008)
+#define TBSCR_REFBE		((ushort)0x0004)
+#define TBSCR_TBF		((ushort)0x0002)
+#define TBSCR_TBE		((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK	((ushort)0xff00)
+#define RTCSC_SEC		((ushort)0x0080)
+#define RTCSC_ALR		((ushort)0x0040)
+#define RTCSC_38K		((ushort)0x0010)
+#define RTCSC_SIE		((ushort)0x0008)
+#define RTCSC_ALE		((ushort)0x0004)
+#define RTCSC_RTF		((ushort)0x0002)
+#define RTCSC_RTE		((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK		((ushort)0xff00)
+#define PISCR_PS		((ushort)0x0080)
+#define PISCR_PIE		((ushort)0x0004)
+#define PISCR_PTF		((ushort)0x0002)
+#define PISCR_PTE		((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	uint	car_sccr;
+	uint	car_plprcr;
+	uint	car_rsr;
+	char	res[0x74];        /* Reserved area                  */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+	uint	sitk_tbscrk;
+	uint	sitk_tbreff0k;
+	uint	sitk_tbreff1k;
+	uint	sitk_tbk;
+	char	res1[0x10];
+	uint	sitk_rtcsck;
+	uint	sitk_rtck;
+	uint	sitk_rtseck;
+	uint	sitk_rtcalk;
+	char	res2[0x10];
+	uint	sitk_piscrk;
+	uint	sitk_pitck;
+	char	res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+	uint	cark_sccrk;
+	uint	cark_plprcrk;
+	uint	cark_rsrk;
+	char	res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY	((unsigned int)0x55ccaa33)
+
+/* Video interface.  MPC823 Only.
+*/
+typedef struct vid823 {
+	ushort	vid_vccr;
+	ushort	res1;
+	u_char	vid_vsr;
+	u_char	res2;
+	u_char	vid_vcmr;
+	u_char	res3;
+	uint	vid_vbcb;
+	uint	res4;
+	uint	vid_vfcr0;
+	uint	vid_vfaa0;
+	uint	vid_vfba0;
+	uint	vid_vfcr1;
+	uint	vid_vfaa1;
+	uint	vid_vfba1;
+	u_char	res5[0x18];
+} vid823_t;
+
+/* LCD interface.  823 Only.
+*/
+typedef struct lcd {
+	uint	lcd_lccr;
+	uint	lcd_lchcr;
+	uint	lcd_lcvcr;
+	char	res1[4];
+	uint	lcd_lcfaa;
+	uint	lcd_lcfba;
+	char	lcd_lcsr;
+	char	res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+	u_char	i2c_i2mod;
+	char	res1[3];
+	u_char	i2c_i2add;
+	char	res2[3];
+	u_char	i2c_i2brg;
+	char	res3[3];
+	u_char	i2c_i2com;
+	char	res4[3];
+	u_char	i2c_i2cer;
+	char	res5[3];
+	u_char	i2c_i2cmr;
+	char	res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	char	res1[4];
+	uint	sdma_sdar;
+	u_char	sdma_sdsr;
+	char	res3[3];
+	u_char	sdma_sdmr;
+	char	res4[3];
+	u_char	sdma_idsr1;
+	char	res5[3];
+	u_char	sdma_idmr1;
+	char	res6[3];
+	u_char	sdma_idsr2;
+	char	res7[3];
+	u_char	sdma_idmr2;
+	char	res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+	ushort	cpic_civr;
+	char	res[0xe];
+	uint	cpic_cicr;
+	uint	cpic_cipr;
+	uint	cpic_cimr;
+	uint	cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+	ushort	iop_padir;
+	ushort	iop_papar;
+	ushort	iop_paodr;
+	ushort	iop_padat;
+	char	res1[8];
+	ushort	iop_pcdir;
+	ushort	iop_pcpar;
+	ushort	iop_pcso;
+	ushort	iop_pcdat;
+	ushort	iop_pcint;
+	char	res2[6];
+	ushort	iop_pddir;
+	ushort	iop_pdpar;
+	char	res3[2];
+	ushort	iop_pddat;
+	uint	utmode;
+	char	res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	ushort	cpmt_tgcr;
+	char	res1[0xe];
+	ushort	cpmt_tmr1;
+	ushort	cpmt_tmr2;
+	ushort	cpmt_trr1;
+	ushort	cpmt_trr2;
+	ushort	cpmt_tcr1;
+	ushort	cpmt_tcr2;
+	ushort	cpmt_tcn1;
+	ushort	cpmt_tcn2;
+	ushort	cpmt_tmr3;
+	ushort	cpmt_tmr4;
+	ushort	cpmt_trr3;
+	ushort	cpmt_trr4;
+	ushort	cpmt_tcr3;
+	ushort	cpmt_tcr4;
+	ushort	cpmt_tcn3;
+	ushort	cpmt_tcn4;
+	ushort	cpmt_ter1;
+	ushort	cpmt_ter2;
+	ushort	cpmt_ter3;
+	ushort	cpmt_ter4;
+	char	res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc {		/* Serial communication channels */
+	uint	scc_gsmrl;
+	uint	scc_gsmrh;
+	ushort	scc_psmr;
+	char	res1[2];
+	ushort	scc_todr;
+	ushort	scc_dsr;
+	ushort	scc_scce;
+	char	res2[2];
+	ushort	scc_sccm;
+	char	res3;
+	u_char	scc_sccs;
+	char	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	char	res1[2];
+	ushort	smc_smcmr;
+	char	res2[2];
+	u_char	smc_smce;
+	char	res3[3];
+	u_char	smc_smcm;
+	char	res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+	uint	fec_addr_low;		/* lower 32 bits of station address	*/
+	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
+	ushort	res1;			/* reserved				*/
+	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
+	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
+	uint	fec_r_buff_size;	/* Rx buffer size			*/
+	uint	res2[9];		/* reserved				*/
+	uint	fec_ecntrl;		/* ethernet control register		*/
+	uint	fec_ievent;		/* interrupt event register		*/
+	uint	fec_imask;		/* interrupt mask register		*/
+	uint	fec_ivec;		/* interrupt level and vector status	*/
+	uint	fec_r_des_active;	/* Rx ring updated flag			*/
+	uint	fec_x_des_active;	/* Tx ring updated flag			*/
+	uint	res3[10];		/* reserved				*/
+	uint	fec_mii_data;		/* MII data register			*/
+	uint	fec_mii_speed;		/* MII speed control register		*/
+	uint	res4[17];		/* reserved				*/
+	uint	fec_r_bound;		/* end of RAM (read-only)		*/
+	uint	fec_r_fstart;		/* Rx FIFO start address		*/
+	uint	res5[6];		/* reserved				*/
+	uint	fec_x_fstart;		/* Tx FIFO start address		*/
+	uint	res6[17];		/* reserved				*/
+	uint	fec_fun_code;		/* fec SDMA function code		*/
+	uint	res7[3];		/* reserved				*/
+	uint	fec_r_cntrl;		/* Rx control register			*/
+	uint	fec_r_hash;		/* Rx hash register			*/
+	uint	res8[14];		/* reserved				*/
+	uint	fec_x_cntrl;		/* Tx control register			*/
+	uint	res9[0x1e];		/* reserved				*/
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+	fec_t	fl_un_fec;
+	u_char	fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+	/* General control and status registers.
+	*/
+	ushort	cp_cpcr;
+	u_char	res1[2];
+	ushort	cp_rccr;
+	u_char	res2;
+	u_char	cp_rmds;
+	u_char	res3[4];
+	ushort	cp_cpmcr1;
+	ushort	cp_cpmcr2;
+	ushort	cp_cpmcr3;
+	ushort	cp_cpmcr4;
+	u_char	res4[2];
+	ushort	cp_rter;
+	u_char	res5[2];
+	ushort	cp_rtmr;
+	u_char	res6[0x14];
+
+	/* Baud rate generators.
+	*/
+	uint	cp_brgc1;
+	uint	cp_brgc2;
+	uint	cp_brgc3;
+	uint	cp_brgc4;
+
+	/* Serial Communication Channels.
+	*/
+	scc_t	cp_scc[4];
+
+	/* Serial Management Channels.
+	*/
+	smc_t	cp_smc[2];
+
+	/* Serial Peripheral Interface.
+	*/
+	ushort	cp_spmode;
+	u_char	res7[4];
+	u_char	cp_spie;
+	u_char	res8[3];
+	u_char	cp_spim;
+	u_char	res9[2];
+	u_char	cp_spcom;
+	u_char	res10[2];
+
+	/* Parallel Interface Port.
+	*/
+	u_char	res11[2];
+	ushort	cp_pipc;
+	u_char	res12[2];
+	ushort	cp_ptpr;
+	uint	cp_pbdir;
+	uint	cp_pbpar;
+	u_char	res13[2];
+	ushort	cp_pbodr;
+	uint	cp_pbdat;
+
+	/* Port E - MPC87x/88x only.
+	 */
+	uint	cp_pedir;
+	uint	cp_pepar;
+	uint	cp_peso;
+	uint	cp_peodr;
+	uint	cp_pedat;
+
+	/* Communications Processor Timing Register -
+	   Contains RMII Timing for the FECs on MPC87x/88x only.
+	*/
+	uint	cp_cptr;
+
+	/* Serial Interface and Time Slot Assignment.
+	*/
+	uint	cp_simode;
+	u_char	cp_sigmr;
+	u_char	res15;
+	u_char	cp_sistr;
+	u_char	cp_sicmr;
+	u_char	res16[4];
+	uint	cp_sicr;
+	uint	cp_sirp;
+	u_char	res17[0xc];
+
+	/* 256 bytes of MPC823 video controller RAM array.
+	*/
+	u_char	cp_vcram[0x100];
+	u_char	cp_siram[0x200];
+
+	/* The fast ethernet controller is not really part of the CPM,
+	 * but it resides in the address space.
+	 * The LCD color map is also here.
+	 */
+	union	fec_lcd	fl_un;
+#define cp_fec		fl_un.fl_un_fec
+#define lcd_cmap	fl_un.fl_un_cmap
+	char	res18[0xE00];
+
+	/* The DUET family has a second FEC here */
+	fec_t	cp_fec2;
+#define cp_fec1	cp_fec	/* consistency macro */
+
+	/* Dual Ported RAM follows.
+	 * There are many different formats for this memory area
+	 * depending upon the devices used and options chosen.
+	 * Some processors don't have all of it populated.
+	 */
+	u_char	cp_dpmem[0x1C00];	/* BD / Data / ucode */
+	u_char	cp_dparam[0x400];	/* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+	sysconf8xx_t	im_siu_conf;	/* SIU Configuration */
+	pcmconf8xx_t	im_pcmcia;	/* PCMCIA Configuration */
+	memctl8xx_t	im_memctl;	/* Memory Controller */
+	sit8xx_t	im_sit;		/* System integration timers */
+	car8xx_t	im_clkrst;	/* Clocks and reset */
+	sitk8xx_t	im_sitk;	/* Sys int timer keys */
+	cark8xx_t	im_clkrstk;	/* Clocks and reset keys */
+	vid823_t	im_vid;		/* Video (823 only) */
+	lcd823_t	im_lcd;		/* LCD (823 only) */
+	i2c8xx_t	im_i2c;		/* I2C control/status */
+	sdma8xx_t	im_sdma;	/* SDMA control/status */
+	cpic8xx_t	im_cpic;	/* CPM Interrupt Controller */
+	iop8xx_t	im_ioport;	/* IO Port control/status */
+	cpmtimer8xx_t	im_cpmtimer;	/* CPM timers */
+	cpm8xx_t	im_cpm;		/* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/a.out.h b/include/asm-ppc/a.out.h
new file mode 100644
index 000000000000..8979a94c4a81
--- /dev/null
+++ b/include/asm-ppc/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __PPC_A_OUT_H__
+#define __PPC_A_OUT_H__
+
+/* grabbed from the intel stuff  */
+#define STACK_TOP TASK_SIZE
+
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+
+#endif
diff --git a/include/asm-ppc/agp.h b/include/asm-ppc/agp.h
new file mode 100644
index 000000000000..be27cfa8c5b0
--- /dev/null
+++ b/include/asm-ppc/agp.h
@@ -0,0 +1,13 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/io.h>
+
+/* nothing much needed here */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_mappings()
+#define flush_agp_cache() mb()
+
+#endif
diff --git a/include/asm-ppc/amigahw.h b/include/asm-ppc/amigahw.h
new file mode 100644
index 000000000000..8c98945e7dc1
--- /dev/null
+++ b/include/asm-ppc/amigahw.h
@@ -0,0 +1,17 @@
+#ifdef __KERNEL__
+#ifndef __ASMPPC_AMIGAHW_H
+#define __ASMPPC_AMIGAHW_H
+
+#include <linux/config.h>
+#include <asm-m68k/amigahw.h>
+
+#undef CHIP_PHYSADDR
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define CHIP_PHYSADDR      (0x000000)
+#else
+#define CHIP_PHYSADDR      (0x004000)
+#endif
+
+
+#endif /* __ASMPPC_AMIGAHW_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigaints.h b/include/asm-ppc/amigaints.h
new file mode 100644
index 000000000000..aa3ff6349e81
--- /dev/null
+++ b/include/asm-ppc/amigaints.h
@@ -0,0 +1,133 @@
+/*
+** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 10/2/92 by Greg Harp
+*/
+
+#ifdef __KERNEL__
+#ifndef _ASMm68k_AMIGAINTS_H_
+#define _ASMm68k_AMIGAINTS_H_
+
+/*
+** Amiga Interrupt sources.
+**
+*/
+
+#define AUTO_IRQS           (8)
+#define AMI_STD_IRQS        (14)
+#define CIA_IRQS            (5)
+#define AMI_IRQS            (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
+
+/* vertical blanking interrupt */
+#define IRQ_AMIGA_VERTB     0
+
+/* copper interrupt */
+#define IRQ_AMIGA_COPPER    1
+
+/* Audio interrupts */
+#define IRQ_AMIGA_AUD0	    2
+#define IRQ_AMIGA_AUD1	    3
+#define IRQ_AMIGA_AUD2	    4
+#define IRQ_AMIGA_AUD3	    5
+
+/* Blitter done interrupt */
+#define IRQ_AMIGA_BLIT	    6
+
+/* floppy disk interrupts */
+#define IRQ_AMIGA_DSKSYN    7
+#define IRQ_AMIGA_DSKBLK    8
+
+/* builtin serial port interrupts */
+#define IRQ_AMIGA_RBF	    9
+#define IRQ_AMIGA_TBE	    10
+
+/* software interrupts */
+#define IRQ_AMIGA_SOFT      11
+
+/* interrupts from external hardware */
+#define IRQ_AMIGA_PORTS	    12
+#define IRQ_AMIGA_EXTER	    13
+
+/* CIA interrupt sources */
+#define IRQ_AMIGA_CIAA      14
+#define IRQ_AMIGA_CIAA_TA   14
+#define IRQ_AMIGA_CIAA_TB   15
+#define IRQ_AMIGA_CIAA_ALRM 16
+#define IRQ_AMIGA_CIAA_SP   17
+#define IRQ_AMIGA_CIAA_FLG  18
+#define IRQ_AMIGA_CIAB      19
+#define IRQ_AMIGA_CIAB_TA   19
+#define IRQ_AMIGA_CIAB_TB   20
+#define IRQ_AMIGA_CIAB_ALRM 21
+#define IRQ_AMIGA_CIAB_SP   22
+#define IRQ_AMIGA_CIAB_FLG  23
+
+/* auto-vector interrupts */
+#define IRQ_AMIGA_AUTO      24
+#define IRQ_AMIGA_AUTO_0    24 /* This is just a dummy */
+#define IRQ_AMIGA_AUTO_1    25
+#define IRQ_AMIGA_AUTO_2    26
+#define IRQ_AMIGA_AUTO_3    27
+#define IRQ_AMIGA_AUTO_4    28
+#define IRQ_AMIGA_AUTO_5    29
+#define IRQ_AMIGA_AUTO_6    30
+#define IRQ_AMIGA_AUTO_7    31
+
+#define IRQ_FLOPPY	    IRQ_AMIGA_DSKBLK
+
+/* INTREQR masks */
+#define IRQ1_MASK   0x0007	/* INTREQR mask for IRQ 1 */
+#define IRQ2_MASK   0x0008	/* INTREQR mask for IRQ 2 */
+#define IRQ3_MASK   0x0070	/* INTREQR mask for IRQ 3 */
+#define IRQ4_MASK   0x0780	/* INTREQR mask for IRQ 4 */
+#define IRQ5_MASK   0x1800	/* INTREQR mask for IRQ 5 */
+#define IRQ6_MASK   0x2000	/* INTREQR mask for IRQ 6 */
+#define IRQ7_MASK   0x4000	/* INTREQR mask for IRQ 7 */
+
+#define IF_SETCLR   0x8000      /* set/clr bit */
+#define IF_INTEN    0x4000	/* master interrupt bit in INT* registers */
+#define IF_EXTER    0x2000	/* external level 6 and CIA B interrupt */
+#define IF_DSKSYN   0x1000	/* disk sync interrupt */
+#define IF_RBF	    0x0800	/* serial receive buffer full interrupt */
+#define IF_AUD3     0x0400	/* audio channel 3 done interrupt */
+#define IF_AUD2     0x0200	/* audio channel 2 done interrupt */
+#define IF_AUD1     0x0100	/* audio channel 1 done interrupt */
+#define IF_AUD0     0x0080	/* audio channel 0 done interrupt */
+#define IF_BLIT     0x0040	/* blitter done interrupt */
+#define IF_VERTB    0x0020	/* vertical blanking interrupt */
+#define IF_COPER    0x0010	/* copper interrupt */
+#define IF_PORTS    0x0008	/* external level 2 and CIA A interrupt */
+#define IF_SOFT     0x0004	/* software initiated interrupt */
+#define IF_DSKBLK   0x0002	/* diskblock DMA finished */
+#define IF_TBE	    0x0001	/* serial transmit buffer empty interrupt */
+
+extern void amiga_do_irq(int irq, struct pt_regs *fp);
+extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
+
+/* CIA interrupt control register bits */
+
+#define CIA_ICR_TA	0x01
+#define CIA_ICR_TB	0x02
+#define CIA_ICR_ALRM	0x04
+#define CIA_ICR_SP	0x08
+#define CIA_ICR_FLG	0x10
+#define CIA_ICR_ALL	0x1f
+#define CIA_ICR_SETCLR	0x80
+
+/* to access the interrupt control registers of CIA's use only
+** these functions, they behave exactly like the amiga os routines
+*/
+
+extern struct ciabase ciaa_base, ciab_base;
+
+extern unsigned char cia_set_irq(unsigned int irq, int set);
+extern unsigned char cia_able_irq(unsigned int irq, int enable);
+
+#endif /* asm-m68k/amigaints.h */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigappc.h b/include/asm-ppc/amigappc.h
new file mode 100644
index 000000000000..35114ce5135f
--- /dev/null
+++ b/include/asm-ppc/amigappc.h
@@ -0,0 +1,85 @@
+/*
+** asm-ppc/amigappc.h -- This header defines some values and pointers for
+**                        the Phase 5 PowerUp card.
+**
+** Copyright 1997, 1998 by Phase5, Germany.
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 7/22/97 by Jesper Skov
+*/
+
+#ifdef __KERNEL__
+#ifndef _M68K_AMIGAPPC_H
+#define _M68K_AMIGAPPC_H
+
+#ifndef __ASSEMBLY__
+
+/* #include <asm/system.h> */
+#define mb()  __asm__ __volatile__ ("sync" : : : "memory")
+
+#define APUS_WRITE(_a_, _v_)				\
+do {							\
+	(*((volatile unsigned char *)(_a_)) = (_v_));	\
+	mb();						\
+} while (0)
+
+#define APUS_READ(_a_, _v_)				\
+do {							\
+	(_v_) = (*((volatile unsigned char *)(_a_)));	\
+	mb();						\
+} while (0)
+#endif /* ndef __ASSEMBLY__ */
+
+/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */
+#define zTwoBase (0x80000000)
+
+#define APUS_IPL_BASE   	(zTwoBase + 0x00f60000)
+#define APUS_REG_RESET    	(APUS_IPL_BASE + 0x00)
+#define APUS_REG_WAITSTATE    	(APUS_IPL_BASE + 0x10)
+#define APUS_REG_SHADOW    	(APUS_IPL_BASE + 0x18)
+#define APUS_REG_LOCK		(APUS_IPL_BASE + 0x20)
+#define APUS_REG_INT    	(APUS_IPL_BASE + 0x28)
+#define APUS_IPL_EMU		(APUS_IPL_BASE + 0x30)
+#define APUS_INT_LVL		(APUS_IPL_BASE + 0x38)
+
+#define REGSHADOW_SETRESET	(0x80)
+#define REGSHADOW_SELFRESET	(0x40)
+
+#define REGLOCK_SETRESET	(0x80)
+#define REGLOCK_BLACKMAGICK1	(0x40)
+#define REGLOCK_BLACKMAGICK2	(0x20)
+#define REGLOCK_BLACKMAGICK3	(0x10)
+
+#define REGWAITSTATE_SETRESET	(0x80)
+#define REGWAITSTATE_PPCW	(0x08)
+#define REGWAITSTATE_PPCR	(0x04)
+
+#define REGRESET_SETRESET	(0x80)
+#define REGRESET_PPCRESET	(0x10)
+#define REGRESET_M68KRESET	(0x08)
+#define REGRESET_AMIGARESET	(0x04)
+#define REGRESET_AUXRESET	(0x02)
+#define REGRESET_SCSIRESET	(0x01)
+
+#define REGINT_SETRESET		(0x80)
+#define REGINT_ENABLEIPL	(0x02)
+#define REGINT_INTMASTER	(0x01)
+
+#define IPLEMU_SETRESET		(0x80)
+#define IPLEMU_DISABLEINT	(0x40)
+#define IPLEMU_IPL2		(0x20)
+#define IPLEMU_IPL1		(0x10)
+#define IPLEMU_IPL0		(0x08)
+#define IPLEMU_PPCIPL2		(0x04)
+#define IPLEMU_PPCIPL1		(0x02)
+#define IPLEMU_PPCIPL0		(0x01)
+#define IPLEMU_IPLMASK		(IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0)
+
+#define INTLVL_SETRESET         (0x80)
+#define INTLVL_MASK             (0x7f)
+
+#endif /* _M68k_AMIGAPPC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigayle.h b/include/asm-ppc/amigayle.h
new file mode 100644
index 000000000000..1fe0b87859b0
--- /dev/null
+++ b/include/asm-ppc/amigayle.h
@@ -0,0 +1 @@
+#include <asm-m68k/amigayle.h>
diff --git a/include/asm-ppc/amipcmcia.h b/include/asm-ppc/amipcmcia.h
new file mode 100644
index 000000000000..3f65f63f508f
--- /dev/null
+++ b/include/asm-ppc/amipcmcia.h
@@ -0,0 +1 @@
+#include <asm-m68k/amipcmcia.h>
diff --git a/include/asm-ppc/ans-lcd.h b/include/asm-ppc/ans-lcd.h
new file mode 100644
index 000000000000..d795b9fd2db6
--- /dev/null
+++ b/include/asm-ppc/ans-lcd.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_ANS_LCD_H
+#define _PPC_ANS_LCD_H
+
+#define ANSLCD_MINOR		156
+
+#define ANSLCD_CLEAR		0x01
+#define ANSLCD_SENDCTRL		0x02
+#define ANSLCD_SETSHORTDELAY	0x03
+#define ANSLCD_SETLONGDELAY	0x04
+
+#endif
diff --git a/include/asm-ppc/atomic.h b/include/asm-ppc/atomic.h
new file mode 100644
index 000000000000..eeafd505836e
--- /dev/null
+++ b/include/asm-ppc/atomic.h
@@ -0,0 +1,214 @@
+/*
+ * PowerPC atomic operations
+ */
+
+#ifndef _ASM_PPC_ATOMIC_H_
+#define _ASM_PPC_ATOMIC_H_
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+extern void atomic_clear_mask(unsigned long mask, unsigned long *addr);
+
+#ifdef CONFIG_SMP
+#define SMP_SYNC	"sync"
+#define SMP_ISYNC	"\n\tisync"
+#else
+#define SMP_SYNC	""
+#define SMP_ISYNC
+#endif
+
+/* Erratum #77 on the 405 means we need a sync or dcbt before every stwcx.
+ * The old ATOMIC_SYNC_FIX covered some but not all of this.
+ */
+#ifdef CONFIG_IBM405_ERR77
+#define PPC405_ERR77(ra,rb)	"dcbt " #ra "," #rb ";"
+#else
+#define PPC405_ERR77(ra,rb)
+#endif
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_add\n\
+	add	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	SMP_ISYNC
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_sub\n\
+	subf	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	SMP_ISYNC
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_inc\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b"
+	SMP_ISYNC
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_dec\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%2)\
+"	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	SMP_ISYNC
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
+	addic.	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	SMP_ISYNC
+	"\n\
+2:"	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define __MB	__asm__ __volatile__ (SMP_SYNC : : : "memory")
+#define smp_mb__before_atomic_dec()	__MB
+#define smp_mb__after_atomic_dec()	__MB
+#define smp_mb__before_atomic_inc()	__MB
+#define smp_mb__after_atomic_inc()	__MB
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_PPC_ATOMIC_H_ */
diff --git a/include/asm-ppc/backlight.h b/include/asm-ppc/backlight.h
new file mode 100644
index 000000000000..3a1c3dede2a0
--- /dev/null
+++ b/include/asm-ppc/backlight.h
@@ -0,0 +1,30 @@
+/*
+ * Routines for handling backlight control on PowerBooks
+ *
+ * For now, implementation resides in arch/ppc/kernel/pmac_support.c
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_BACKLIGHT_H
+#define __ASM_PPC_BACKLIGHT_H
+
+/* Abstract values */
+#define BACKLIGHT_OFF	0
+#define BACKLIGHT_MIN	1
+#define BACKLIGHT_MAX	0xf
+
+struct backlight_controller {
+	int (*set_enable)(int enable, int level, void *data);
+	int (*set_level)(int level, void *data);
+};
+
+extern void register_backlight_controller(struct backlight_controller *ctrler, void *data, char *type);
+extern void unregister_backlight_controller(struct backlight_controller *ctrler, void *data);
+
+extern int set_backlight_enable(int enable);
+extern int get_backlight_enable(void);
+extern int set_backlight_level(int level);
+extern int get_backlight_level(void);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h
new file mode 100644
index 000000000000..e30f536fd830
--- /dev/null
+++ b/include/asm-ppc/bitops.h
@@ -0,0 +1,460 @@
+/*
+ * bitops.h: Bit string operations on the ppc
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_BITOPS_H
+#define _PPC_BITOPS_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+/*
+ * The test_and_*_bit operations are taken to imply a memory barrier
+ * on SMP systems.
+ */
+#ifdef CONFIG_SMP
+#define SMP_WMB		"eieio\n"
+#define SMP_MB		"\nsync"
+#else
+#define SMP_WMB
+#define SMP_MB
+#endif /* CONFIG_SMP */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	
+	__asm__ __volatile__("\n\
+1:	lwarx	%0,0,%3 \n\
+	or	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc" );
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p |= mask;
+}
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	__asm__ __volatile__("\n\
+1:	lwarx	%0,0,%3 \n\
+	andc	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	__asm__ __volatile__("\n\
+1:	lwarx	%0,0,%3 \n\
+	xor	%0,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p ^= mask;
+}
+
+/*
+ * test_and_*_bit do imply a memory barrier (?)
+ */
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	or	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	andc	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned int old, t;
+	unsigned int mask = 1 << (nr & 0x1f);
+	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+	__asm__ __volatile__(SMP_WMB "\n\
+1:	lwarx	%0,0,%4 \n\
+	xor	%1,%0,%3 \n"
+	PPC405_ERR77(0,%4)
+"	stwcx.	%1,0,%4 \n\
+	bne	1b"
+	SMP_MB
+	: "=&r" (old), "=&r" (t), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr)
+{
+	return ((addr[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
+}
+
+/* Return the bit position of the most significant 1 bit in a word */
+static __inline__ int __ilog2(unsigned long x)
+{
+	int lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+	return 31 - lz;
+}
+
+static __inline__ int ffz(unsigned long x)
+{
+	if ((x = ~x) == 0)
+		return 32;
+	return __ilog2(x & -x);
+}
+
+static inline int __ffs(unsigned long x)
+{
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	return __ilog2(x & -x) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static __inline__ int fls(unsigned int x)
+{
+	int lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+	return 32 - lz;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Find the first bit set in a 140-bit bitmap.
+ * The first 100 bits are unlikely to be set.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long find_next_zero_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int * p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (tmp != ~0U)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != ~0U)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+found_first:
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)        /* Are any bits zero? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + ffz(tmp);
+}
+
+
+#define ext2_set_bit(nr, addr)	__test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock, nr, addr)  test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr))
+
+static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
+{
+	__const__ unsigned char	*ADDR = (__const__ unsigned char *) addr;
+
+	return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * This implementation of ext2_find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
+ */
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(const void *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = cpu_to_le32p(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (tmp != ~0U)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = cpu_to_le32p(p++)) != ~0U)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = cpu_to_le32p(p);
+found_first:
+	tmp |= ~0U << size;
+	if (tmp == ~0UL)        /* Are any bits zero? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + ffz(tmp);
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
+#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size)
+
+#endif /* _PPC_BITOPS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h
new file mode 100644
index 000000000000..93d955c70d65
--- /dev/null
+++ b/include/asm-ppc/bootinfo.h
@@ -0,0 +1,52 @@
+/*
+ * Non-machine dependent bootinfo structure.  Basic idea
+ * borrowed from the m68k.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org>
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_BOOTINFO_H
+#define _PPC_BOOTINFO_H
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+#if defined(CONFIG_APUS) && !defined(__BOOTER__)
+#include <asm-m68k/bootinfo.h>
+#else
+
+struct bi_record {
+	unsigned long tag;		/* tag ID */
+	unsigned long size;		/* size of record (in bytes) */
+	unsigned long data[0];		/* data */
+};
+
+#define BI_FIRST		0x1010  /* first record - marker */
+#define BI_LAST			0x1011	/* last record - marker */
+#define BI_CMD_LINE		0x1012
+#define BI_BOOTLOADER_ID	0x1013
+#define BI_INITRD		0x1014
+#define BI_SYSMAP		0x1015
+#define BI_MACHTYPE		0x1016
+#define BI_MEMSIZE		0x1017
+#define BI_BOARD_INFO		0x1018
+
+extern struct bi_record *find_bootinfo(void);
+extern void bootinfo_init(struct bi_record *rec);
+extern void bootinfo_append(unsigned long tag, unsigned long size, void * data);
+extern void parse_bootinfo(struct bi_record *rec);
+extern unsigned long boot_mem_size;
+
+static inline struct bi_record *
+bootinfo_addr(unsigned long offset)
+{
+
+	return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
+					  (1 << 20));
+}
+#endif /* CONFIG_APUS */
+
+
+#endif /* _PPC_BOOTINFO_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootx.h b/include/asm-ppc/bootx.h
new file mode 100644
index 000000000000..b0c51b45d7a2
--- /dev/null
+++ b/include/asm-ppc/bootx.h
@@ -0,0 +1,135 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58    ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION               5
+#define BOOT_INFO_COMPATIBLE_VERSION    1
+
+/* Bit in the architecture flag mask. More to be defined in
+   future versions. Note that either BOOT_ARCH_PCI or
+   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+   set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI                   0x00000001UL
+#define BOOT_ARCH_NUBUS                 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
+
+/*  Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE				26
+
+/* This is the format of an element in the physical memory map. Note that
+   the map is optional and current BootX will only build it for pre-PCI
+   machines */
+typedef struct boot_info_map_entry
+{
+    __u32       physAddr;                /* Physical starting address */
+    __u32       size;                    /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+    /* Version of this structure */
+    __u32       version;
+    /* backward compatible down to version: */
+    __u32       compatible_version;
+
+    /* NEW (vers. 2) this holds the current _logical_ base addr of
+       the frame buffer (for use by early boot message) */
+    __u8*       logicalDisplayBase;
+
+    /* NEW (vers. 4) Apple's machine identification */
+    __u32       machineID;
+
+    /* NEW (vers. 4) Detected hw architecture */
+    __u32       architecture;
+
+    /* The device tree (internal addresses relative to the beginning of the tree,
+     * device tree offset relative to the beginning of this structure).
+     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+     * field is 0.
+     */
+    __u32       deviceTreeOffset;        /* Device tree offset */
+    __u32       deviceTreeSize;          /* Size of the device tree */
+
+    /* Some infos about the current MacOS display */
+    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
+    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
+    __u8*       dispDeviceBase;          /* base address (physical) */
+    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
+    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
+    /* Optional offset in the registry to the current
+     * MacOS display. (Can be 0 when not detected) */
+     __u32      dispDeviceRegEntryOffset;
+
+    /* Optional pointer to boot ramdisk (offset from this structure) */
+    __u32       ramDisk;
+    __u32       ramDiskSize;             /* size of ramdisk image */
+
+    /* Kernel command line arguments (offset from this structure) */
+    __u32       kernelParamsOffset;
+
+    /* ALL BELOW NEW (vers. 4) */
+
+    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       device-tree. */
+    boot_info_map_entry_t
+    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+    __u32       physMemoryMapSize;               /* How many entries in map */
+
+
+    /* The framebuffer size (optional, currently 0) */
+    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
+
+    /* NEW (vers. 5) */
+
+    /* Total params size (args + colormap + device tree + ramdisk) */
+    __u32       totalParamsSize;
+
+} boot_infos_t;
+
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index is represented
+ * by 3 short words containing a 16 bits (unsigned) color component.
+ * Later versions may contain the gamma table for direct-color devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/include/asm-ppc/bseip.h b/include/asm-ppc/bseip.h
new file mode 100644
index 000000000000..691f4a52b0a5
--- /dev/null
+++ b/include/asm-ppc/bseip.h
@@ -0,0 +1,38 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Bright Star Engineering ip-Engine board.  Copied from the MBX stuff.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+#ifndef __MACH_BSEIP_DEFS
+#define __MACH_BSEIP_DEFS
+
+#ifndef __ASSEMBLY__
+/* A Board Information structure that is given to a program when
+ * prom starts it up.
+ */
+typedef struct bd_info {
+	unsigned int	bi_memstart;	/* Memory start address */
+	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
+	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
+	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
+	unsigned char	bi_enetaddr[6];
+	unsigned int	bi_baudrate;
+} bd_t;
+
+extern bd_t m8xx_board_info;
+
+/* Memory map is configured by the PROM startup.
+ * All we need to get started is the IMMR.
+ */
+#define IMAP_ADDR		((uint)0xff000000)
+#define IMAP_SIZE		((uint)(64 * 1024))
+#define PCMCIA_MEM_ADDR		((uint)0x04000000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
+#endif	/* !__ASSEMBLY__ */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS	0
+
+#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
new file mode 100644
index 000000000000..36c7640d00f2
--- /dev/null
+++ b/include/asm-ppc/btext.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/bootx.h>
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+
+extern unsigned long disp_BAT[2];
+
+extern boot_infos_t disp_bi;
+extern int boot_text_mapped;
+
+void btext_init(boot_infos_t *bi);
+void btext_welcome(void);
+void btext_prepare_BAT(void);
+void btext_setup_display(int width, int height, int depth, int pitch,
+			 unsigned long address);
+void map_boot_text(void);
+void btext_update_display(unsigned long phys, int width, int height,
+			  int depth, int pitch);
+
+void btext_drawchar(char c);
+void btext_drawstring(const char *str);
+void btext_drawhex(unsigned long v);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc/bug.h b/include/asm-ppc/bug.h
new file mode 100644
index 000000000000..e99c6cb9d618
--- /dev/null
+++ b/include/asm-ppc/bug.h
@@ -0,0 +1,55 @@
+#ifndef _PPC_BUG_H
+#define _PPC_BUG_H
+
+struct bug_entry {
+	unsigned long	bug_addr;
+	int		line;
+	const char	*file;
+	const char	*function;
+};
+
+/*
+ * If this bit is set in the line number it means that the trap
+ * is for WARN_ON rather than BUG or BUG_ON.
+ */
+#define BUG_WARNING_TRAP	0x1000000
+
+#define BUG() do {							 \
+	__asm__ __volatile__(						 \
+		"1:	twi 31,0,0\n"					 \
+		".section __bug_table,\"a\"\n\t"			 \
+		"	.long 1b,%0,%1,%2\n"				 \
+		".previous"						 \
+		: : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+} while (0)
+
+#define BUG_ON(x) do {							\
+	if (!__builtin_constant_p(x) || (x)) {				\
+		__asm__ __volatile__(					\
+			"1:	twnei %0,0\n"				\
+			".section __bug_table,\"a\"\n\t"		\
+			"	.long 1b,%1,%2,%3\n"			\
+			".previous"					\
+			: : "r" (x), "i" (__LINE__), "i" (__FILE__),	\
+			    "i" (__FUNCTION__));			\
+	}								\
+} while (0)
+
+#define WARN_ON(x) do {							\
+	if (!__builtin_constant_p(x) || (x)) {				\
+		__asm__ __volatile__(					\
+			"1:	twnei %0,0\n"				\
+			".section __bug_table,\"a\"\n\t"		\
+			"	.long 1b,%1,%2,%3\n"			\
+			".previous"					\
+			: : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP),	\
+			    "i" (__FILE__), "i" (__FUNCTION__));	\
+	}								\
+} while (0)
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ppc/bugs.h b/include/asm-ppc/bugs.h
new file mode 100644
index 000000000000..8dce1e290fd0
--- /dev/null
+++ b/include/asm-ppc/bugs.h
@@ -0,0 +1,6 @@
+/*
+ * This file is included by 'init/main.c'
+ */
+
+extern void
+check_bugs(void);
diff --git a/include/asm-ppc/byteorder.h b/include/asm-ppc/byteorder.h
new file mode 100644
index 000000000000..c63c81ec7968
--- /dev/null
+++ b/include/asm-ppc/byteorder.h
@@ -0,0 +1,76 @@
+#ifndef _PPC_BYTEORDER_H
+#define _PPC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+extern __inline__ unsigned ld_le16(const volatile unsigned short *addr)
+{
+	unsigned val;
+
+	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+extern __inline__ void st_le16(volatile unsigned short *addr, const unsigned val)
+{
+	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+extern __inline__ unsigned ld_le32(const volatile unsigned *addr)
+{
+	unsigned val;
+
+	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val)
+{
+	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+	__u16 result;
+
+	__asm__("rlwimi %0,%2,8,16,23" : "=&r" (result) : "0" (value >> 8), "r" (value));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+	__u32 result;
+
+	__asm__("rlwimi %0,%2,24,16,23" : "=&r" (result) : "0" (value>>24), "r" (value));
+	__asm__("rlwimi %0,%2,8,8,15"   : "=&r" (result) : "0" (result),    "r" (value));
+	__asm__("rlwimi %0,%2,24,0,7"   : "=&r" (result) : "0" (result),    "r" (value));
+
+	return result;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PPC_BYTEORDER_H */
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
new file mode 100644
index 000000000000..38f2f1be4a87
--- /dev/null
+++ b/include/asm-ppc/cache.h
@@ -0,0 +1,87 @@
+/*
+ * include/asm-ppc/cache.h
+ */
+#ifdef __KERNEL__
+#ifndef __ARCH_PPC_CACHE_H
+#define __ARCH_PPC_CACHE_H
+
+#include <linux/config.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define	L1_CACHE_LINE_SIZE	16
+#define LG_L1_CACHE_LINE_SIZE	4
+#define MAX_COPY_PREFETCH	1
+#elif defined(CONFIG_PPC64BRIDGE)
+#define L1_CACHE_LINE_SIZE	128
+#define LG_L1_CACHE_LINE_SIZE	7
+#define MAX_COPY_PREFETCH	1
+#else
+#define	L1_CACHE_LINE_SIZE	32
+#define LG_L1_CACHE_LINE_SIZE	5
+#define MAX_COPY_PREFETCH	4
+#endif
+
+#define	L1_CACHE_BYTES L1_CACHE_LINE_SIZE
+#define L1_CACHE_SHIFT LG_L1_CACHE_LINE_SIZE
+#define	SMP_CACHE_BYTES L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#define	L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define	L1_CACHE_PAGES		8
+
+#ifndef __ASSEMBLY__
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_all(void);
+#endif /* __ASSEMBLY__ */
+
+/* prep registers for L2 */
+#define CACHECRBA       0x80000823      /* Cache configuration register address */
+#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB	0x00	/* 512KB */
+#define L2CACHE_256KB	0x01	/* 256KB */
+#define L2CACHE_1MB	0x02	/* 1MB */
+#define L2CACHE_NONE	0x03	/* NONE */
+#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
+
+#ifdef CONFIG_8xx
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+#endif /* CONFIG_8xx */
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/cacheflush.h b/include/asm-ppc/cacheflush.h
new file mode 100644
index 000000000000..6a243efb3317
--- /dev/null
+++ b/include/asm-ppc/cacheflush.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-ppc/cacheflush.h
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_CACHEFLUSH_H
+#define _PPC_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * No cache flushing is required when address mappings are
+ * changed, because the caches on PowerPCs are physically
+ * addressed.  -- paulus
+ * Also, when SMP we use the coherency (M) bit of the
+ * BATs and PTEs.  -- Cort
+ */
+#define flush_cache_all()		do { } while (0)
+#define flush_cache_mm(mm)		do { } while (0)
+#define flush_cache_range(vma, a, b)	do { } while (0)
+#define flush_cache_page(vma, p, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)	do { } while (0)
+#define flush_cache_vmap(start, end)	do { } while (0)
+#define flush_cache_vunmap(start, end)	do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range(unsigned long, unsigned long);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+		struct page *page, unsigned long addr, int len);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+extern void __flush_dcache_icache(void *page_va);
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+extern void flush_dcache_icache_page(struct page *page);
+#endif /* _PPC_CACHEFLUSH_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/checksum.h b/include/asm-ppc/checksum.h
new file mode 100644
index 000000000000..cf953a92c7ab
--- /dev/null
+++ b/include/asm-ppc/checksum.h
@@ -0,0 +1,107 @@
+#ifdef __KERNEL__
+#ifndef _PPC_CHECKSUM_H
+#define _PPC_CHECKSUM_H
+
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len,
+				 unsigned int sum);
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively (if that pointer is not
+ * NULL), and, for an error on src, zeroes the rest of dst.
+ *
+ * Like csum_partial, this must be called with even lengths,
+ * except for the last fragment.
+ */
+extern unsigned int csum_partial_copy_generic(const char *src, char *dst,
+					      int len, unsigned int sum,
+					      int *src_err, int *dst_err);
+
+#define csum_partial_copy_from_user(src, dst, len, sum, errp)	\
+	csum_partial_copy_generic((__force void *)(src), (dst), (len), (sum), (errp), NULL)
+
+/* FIXME: this needs to be written to really do no check -- Cort */
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int tmp;
+
+	/* swap the two 16-bit halves of sum */
+	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+	/* if there is a carry from adding the two 16-bit halves,
+	   it will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	sum = ~(sum + tmp) >> 16;
+	return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+/*
+ * FIXME: I swiped this one from the sparc and made minor modifications.
+ * It may not be correct.  -- Cort
+ */
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+    __asm__("\n\
+	addc %0,%0,%1 \n\
+	adde %0,%0,%2 \n\
+	adde %0,%0,%3 \n\
+	addze %0,%0 \n\
+	"
+	: "=r" (sum)
+	: "r" (daddr), "r"(saddr), "r"((proto<<16)+len), "0"(sum));
+    return sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern unsigned short csum_tcpudp_magic(unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					unsigned int sum);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
new file mode 100644
index 000000000000..5bbb8e2c1c6d
--- /dev/null
+++ b/include/asm-ppc/commproc.h
@@ -0,0 +1,695 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_8XX__
+#define __CPM_8XX__
+
+#include <linux/config.h>
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* Some commands (there are more...later)
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	CPM_CR_SET_GADDR
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1		((ushort)0x0000)
+#define CPM_CR_CH_I2C		((ushort)0x0001)	/* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2		((ushort)0x0004)
+#define CPM_CR_CH_SPI		((ushort)0x0005)	/* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER		CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3		((ushort)0x0008)
+#define CPM_CR_CH_SMC1		((ushort)0x0009)	/* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4		((ushort)0x000c)
+#define CPM_CR_CH_SMC2		((ushort)0x000d)	/* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+#define CPM_DATAONLY_BASE	((uint)0x0800)
+#define CPM_DATAONLY_SIZE	((uint)0x0700)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+static inline long IS_DPERR(const uint offset)
+{
+	return (uint)offset > (uint)-1000L;
+}
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern	cpm8xx_t	*cpmp;		/* Pointer to comm processor */
+extern uint cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(uint offset);
+extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(uint offset);
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern uint m8xx_cpm_hostalloc(uint size);
+extern int  m8xx_cpm_hostfree(uint start);
+extern void m8xx_cpm_hostdump(void);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_NAK	((ushort)0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
+#define BD_SC_CD	((ushort)0x0001)	/* ?? */
+#define BD_SC_CL	((ushort)0x0001)	/* Collision */
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1	((uint)0x0000)
+#define PROFF_IIC	((uint)0x0080)
+#define PROFF_SCC2	((uint)0x0100)
+#define PROFF_SPI	((uint)0x0180)
+#define PROFF_SCC3	((uint)0x0200)
+#define PROFF_SMC1	((uint)0x0280)
+#define PROFF_SCC4	((uint)0x0300)
+#define PROFF_SMC2	((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	char	res1[8];	/* Reserved */
+	ushort	smc_rpbase;	/* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC	((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_BC		((ushort)0x0080)	/* DA is Broadcast */
+#define BD_ENET_RX_MC		((ushort)0x0040)	/* DA is Multicast */
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	char	res1[8];	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+	char	res1[4];	/* Reserved */
+	ushort	iic_rpbase;	/* Relocation pointer */
+	char	res2[2];	/* Reserved */
+} iic_t;
+
+#define BD_IIC_START		((ushort)0x0400)
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;
+	ushort	spi_rpbase;	/* Relocation pointer */
+	ushort	spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
+#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
+#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME	0x20
+#define SPIE_TXE	0x10
+#define SPIE_BSY	0x04
+#define SPIE_TXB	0x02
+#define SPIE_RXB	0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME	0x8000			/* RISC Timer Enable */
+#define RCCR_TIMEP(t)	(((t) & 0x3F)<<8)	/* RISC Timer Period */
+#define RCCR_TIME_MASK	0x00FF			/* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR	((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+	unsigned short	tm_base;	/* RISC Timer Table Base Address */
+	unsigned short	tm_ptr;		/* RISC Timer Table Pointer (internal) */
+	unsigned short	r_tmr;		/* RISC Timer Mode Register */
+	unsigned short	r_tmv;		/* RISC Timer Valid Register */
+	unsigned long	tm_cmd;		/* RISC Timer Command Register */
+	unsigned long	tm_cnt;		/* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID	0x80000000	/* Valid - Enables the timer */
+#define TM_CMD_RESTART	0x40000000	/* Restart - for automatic restart */
+#define TM_CMD_PWM	0x20000000	/* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n)	(((n)&0xF)<<16)	/* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF)	/* Timer Period */
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR		32
+#define	CPMVEC_PIO_PC15		((ushort)0x1f)
+#define	CPMVEC_SCC1		((ushort)0x1e)
+#define	CPMVEC_SCC2		((ushort)0x1d)
+#define	CPMVEC_SCC3		((ushort)0x1c)
+#define	CPMVEC_SCC4		((ushort)0x1b)
+#define	CPMVEC_PIO_PC14		((ushort)0x1a)
+#define	CPMVEC_TIMER1		((ushort)0x19)
+#define	CPMVEC_PIO_PC13		((ushort)0x18)
+#define	CPMVEC_PIO_PC12		((ushort)0x17)
+#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
+#define CPMVEC_IDMA1		((ushort)0x15)
+#define CPMVEC_IDMA2		((ushort)0x14)
+#define CPMVEC_TIMER2		((ushort)0x12)
+#define CPMVEC_RISCTIMER	((ushort)0x11)
+#define CPMVEC_I2C		((ushort)0x10)
+#define	CPMVEC_PIO_PC11		((ushort)0x0f)
+#define	CPMVEC_PIO_PC10		((ushort)0x0e)
+#define CPMVEC_TIMER3		((ushort)0x0c)
+#define	CPMVEC_PIO_PC9		((ushort)0x0b)
+#define	CPMVEC_PIO_PC8		((ushort)0x0a)
+#define	CPMVEC_PIO_PC7		((ushort)0x09)
+#define CPMVEC_TIMER4		((ushort)0x07)
+#define	CPMVEC_PIO_PC6		((ushort)0x06)
+#define	CPMVEC_SPI		((ushort)0x05)
+#define	CPMVEC_SMC1		((ushort)0x04)
+#define	CPMVEC_SMC2		((ushort)0x03)
+#define	CPMVEC_PIO_PC5		((ushort)0x02)
+#define	CPMVEC_PIO_PC4		((ushort)0x01)
+#define	CPMVEC_ERROR		((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+
+extern void cpm_install_handler(int vec,
+		void (*handler)(void *, struct pt_regs *regs), void *dev_id);
+extern void cpm_free_handler(int vec);
+
+#endif /* __CPM_8XX__ */
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
new file mode 100644
index 000000000000..42fd1068cf2a
--- /dev/null
+++ b/include/asm-ppc/cpm2.h
@@ -0,0 +1,1045 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map.  See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((uint)0x80000000)
+#define CPM_CR_PAGE	((uint)0x7c000000)
+#define CPM_CR_SBLOCK	((uint)0x03e00000)
+#define CPM_CR_FLG	((uint)0x00010000)
+#define CPM_CR_MCN	((uint)0x00003fc0)
+#define CPM_CR_OPCODE	((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK	(0x04)
+#define CPM_CR_SCC2_SBLOCK	(0x05)
+#define CPM_CR_SCC3_SBLOCK	(0x06)
+#define CPM_CR_SCC4_SBLOCK	(0x07)
+#define CPM_CR_SMC1_SBLOCK	(0x08)
+#define CPM_CR_SMC2_SBLOCK	(0x09)
+#define CPM_CR_SPI_SBLOCK	(0x0a)
+#define CPM_CR_I2C_SBLOCK	(0x0b)
+#define CPM_CR_TIMER_SBLOCK	(0x0f)
+#define CPM_CR_RAND_SBLOCK	(0x0e)
+#define CPM_CR_FCC1_SBLOCK	(0x10)
+#define CPM_CR_FCC2_SBLOCK	(0x11)
+#define CPM_CR_FCC3_SBLOCK	(0x12)
+#define CPM_CR_IDMA1_SBLOCK	(0x14)
+#define CPM_CR_IDMA2_SBLOCK	(0x15)
+#define CPM_CR_IDMA3_SBLOCK	(0x16)
+#define CPM_CR_IDMA4_SBLOCK	(0x17)
+#define CPM_CR_MCC1_SBLOCK	(0x1c)
+
+#define CPM_CR_SCC1_PAGE	(0x00)
+#define CPM_CR_SCC2_PAGE	(0x01)
+#define CPM_CR_SCC3_PAGE	(0x02)
+#define CPM_CR_SCC4_PAGE	(0x03)
+#define CPM_CR_SMC1_PAGE	(0x07)
+#define CPM_CR_SMC2_PAGE	(0x08)
+#define CPM_CR_SPI_PAGE		(0x09)
+#define CPM_CR_I2C_PAGE		(0x0a)
+#define CPM_CR_TIMER_PAGE	(0x0a)
+#define CPM_CR_RAND_PAGE	(0x0a)
+#define CPM_CR_FCC1_PAGE	(0x04)
+#define CPM_CR_FCC2_PAGE	(0x05)
+#define CPM_CR_FCC3_PAGE	(0x06)
+#define CPM_CR_IDMA1_PAGE	(0x07)
+#define CPM_CR_IDMA2_PAGE	(0x08)
+#define CPM_CR_IDMA3_PAGE	(0x09)
+#define CPM_CR_IDMA4_PAGE	(0x0a)
+#define CPM_CR_MCC1_PAGE	(0x07)
+#define CPM_CR_MCC2_PAGE	(0x08)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_START_IDMA	((ushort)0x0009)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* Dual Port RAM addresses.  The first 16K is available for almost
+ * any CPM use, so we put the BDs there.  The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that.  All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE	((uint)128)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
+#define CPM_DATAONLY_SIZE	((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE	((uint)0x00009000)
+#else
+#define CPM_DATAONLY_SIZE	((uint)(16 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE	((uint)0x0000b000)
+#endif
+
+/* The number of pages of host memory we allocate for CPM.  This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES	2
+
+static inline long IS_DPERR(const uint offset)
+{
+	return (uint)offset > (uint)-1000L;
+}
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern		cpm_cpm2_t	*cpmp;	 /* Pointer to comm processor */
+extern uint cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(uint offset);
+extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(uint offset);
+extern void cpm_setbrg(uint brg, uint rate);
+extern void cpm2_fastbrg(uint brg, uint rate, int div16);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame */
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1		((uint)0x8000)
+#define PROFF_SCC2		((uint)0x8100)
+#define PROFF_SCC3		((uint)0x8200)
+#define PROFF_SCC4		((uint)0x8300)
+#define PROFF_FCC1		((uint)0x8400)
+#define PROFF_FCC2		((uint)0x8500)
+#define PROFF_FCC3		((uint)0x8600)
+#define PROFF_MCC1		((uint)0x8700)
+#define PROFF_SMC1_BASE		((uint)0x87fc)
+#define PROFF_IDMA1_BASE	((uint)0x87fe)
+#define PROFF_MCC2		((uint)0x8800)
+#define PROFF_SMC2_BASE		((uint)0x88fc)
+#define PROFF_IDMA2_BASE	((uint)0x88fe)
+#define PROFF_SPI_BASE		((uint)0x89fc)
+#define PROFF_IDMA3_BASE	((uint)0x89fe)
+#define PROFF_TIMERS		((uint)0x8ae0)
+#define PROFF_REVNUM		((uint)0x8af0)
+#define PROFF_RAND		((uint)0x8af8)
+#define PROFF_I2C_BASE		((uint)0x8afc)
+#define PROFF_IDMA4_BASE	((uint)0x8afe)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1	(0)
+#define PROFF_SMC2	(64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	uint	smc_stmp;	/* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE	((unsigned char)0x10)
+#define SMCM_BSY	((unsigned char)0x04)
+#define SMCM_TX		((unsigned char)0x02)
+#define SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE	((unsigned char)0x10)
+#define SCCM_BSY	((unsigned char)0x04)
+#define SCCM_TX		((unsigned char)0x02)
+#define SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_BC		((ushort)0x0080)	/* FCC Only */
+#define BD_ENET_RX_MC		((ushort)0x0040)	/* FCC Only */
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x01ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE	((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE	((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)
+#define FCC_GFMR_TCI		((uint)0x20000000)
+#define FCC_GFMR_TRX		((uint)0x10000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_CDP		((uint)0x04000000)
+#define FCC_GFMR_CTSP		((uint)0x02000000)
+#define FCC_GFMR_CDS		((uint)0x01000000)
+#define FCC_GFMR_CTSS		((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)
+#define FCC_GFMR_SYNL_8		((uint)0x00008000)
+#define FCC_GFMR_SYNL_16	((uint)0x0000c000)
+#define FCC_GFMR_RTSM		((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)
+#define FCC_GFMR_REVD		((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)
+#define FCC_GFMR_TCRC_16	((uint)0x00000000)
+#define FCC_GFMR_TCRC_32	((uint)0x00000080)
+#define FCC_GFMR_ENR		((uint)0x00000020)
+#define FCC_GFMR_ENT		((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+	ushort	fcc_riptr;	/* Rx Internal temp pointer */
+	ushort	fcc_tiptr;	/* Tx Internal temp pointer */
+	ushort	fcc_res1;
+	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */
+	uint	fcc_rstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_rbase;	/* Receive BD base */
+	ushort	fcc_rbdstat;	/* RxBD status */
+	ushort	fcc_rbdlen;	/* RxBD down counter */
+	uint	fcc_rdptr;	/* RxBD internal data pointer */
+	uint	fcc_tstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_tbase;	/* Transmit BD base */
+	ushort	fcc_tbdstat;	/* TxBD status */
+	ushort	fcc_tbdlen;	/* TxBD down counter */
+	uint	fcc_tdptr;	/* TxBD internal data pointer */
+	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */
+	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */
+	uint	fcc_rcrc;	/* Rx temp CRC */
+	uint	fcc_res2;
+	uint	fcc_tcrc;	/* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+	fccp_t	fen_genfcc;
+	uint	fen_statbuf;	/* Internal status buffer */
+	uint	fen_camptr;	/* CAM address */
+	uint	fen_cmask;	/* Constant mask for CRC */
+	uint	fen_cpres;	/* Preset CRC */
+	uint	fen_crcec;	/* CRC Error counter */
+	uint	fen_alec;	/* alignment error counter */
+	uint	fen_disfc;	/* discard frame counter */
+	ushort	fen_retlim;	/* Retry limit */
+	ushort	fen_retcnt;	/* Retry counter */
+	ushort	fen_pper;	/* Persistence */
+	ushort	fen_boffcnt;	/* backoff counter */
+	uint	fen_gaddrh;	/* Group address filter, high 32-bits */
+	uint	fen_gaddrl;	/* Group address filter, low 32-bits */
+	ushort	fen_tfcstat;	/* out of sequence TxBD */
+	ushort	fen_tfclen;
+	uint	fen_tfcptr;
+	ushort	fen_mflr;	/* Maximum frame length (1518) */
+	ushort	fen_paddrh;	/* MAC address */
+	ushort	fen_paddrm;
+	ushort	fen_paddrl;
+	ushort	fen_ibdcount;	/* Internal BD counter */
+	ushort	fen_ibdstart;	/* Internal BD start pointer */
+	ushort	fen_ibdend;	/* Internal BD end pointer */
+	ushort	fen_txlen;	/* Internal Tx frame length counter */
+	uint	fen_ibdbase[8]; /* Internal use */
+	uint	fen_iaddrh;	/* Individual address filter */
+	uint	fen_iaddrl;
+	ushort	fen_minflr;	/* Minimum frame length (64) */
+	ushort	fen_taddrh;	/* Filter transfer MAC address */
+	ushort	fen_taddrm;
+	ushort	fen_taddrl;
+	ushort	fen_padptr;	/* Pointer to pad byte buffer */
+	ushort	fen_cftype;	/* control frame type */
+	ushort	fen_cfrange;	/* control frame range */
+	ushort	fen_maxb;	/* maximum BD count */
+	ushort	fen_maxd1;	/* Max DMA1 length (1520) */
+	ushort	fen_maxd2;	/* Max DMA2 length (1520) */
+	ushort	fen_maxd;	/* internal max DMA count */
+	ushort	fen_dmacnt;	/* internal DMA counter */
+	uint	fen_octc;	/* Total octect counter */
+	uint	fen_colc;	/* Total collision counter */
+	uint	fen_broc;	/* Total broadcast packet counter */
+	uint	fen_mulc;	/* Total multicast packet count */
+	uint	fen_uspc;	/* Total packets < 64 bytes */
+	uint	fen_frgc;	/* Total packets < 64 bytes with errors */
+	uint	fen_ospc;	/* Total packets > 1518 */
+	uint	fen_jbrc;	/* Total packets > 1518 with errors */
+	uint	fen_p64c;	/* Total packets == 64 bytes */
+	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */
+	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */
+	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */
+	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */
+	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */
+	uint	fen_cambuf;	/* Internal CAM buffer poiner */
+	ushort	fen_rfthr;	/* Received frames threshold */
+	ushort	fen_rfcnt;	/* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */
+#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */
+#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */
+#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */
+#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */
+#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */
+#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */
+#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */
+#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */
+#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */
+#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */
+#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */
+#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */
+#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;	/* Tx temp. */
+	uint	spi_res1[4];	/* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)	((x) &0xF)
+
+#define SPI_EB		((u_char)0x10)		/* big endian byte order */
+
+#define BD_IIC_START		((ushort)0x0400)
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+	ushort ibase;		/* IDMA buffer descriptor table base address */
+	ushort dcm;		/* DMA channel mode */
+	ushort ibdptr;		/* IDMA current buffer descriptor pointer */
+	ushort dpr_buf;		/* IDMA transfer buffer base address */
+	ushort buf_inv;		/* internal buffer inventory */
+	ushort ss_max;		/* steady-state maximum transfer size */
+	ushort dpr_in_ptr;	/* write pointer inside the internal buffer */
+	ushort sts;		/* source transfer size */
+	ushort dpr_out_ptr;	/* read pointer inside the internal buffer */
+	ushort seob;		/* source end of burst */
+	ushort deob;		/* destination end of burst */
+	ushort dts;		/* destination transfer size */
+	ushort ret_add;		/* return address when working in ERM=1 mode */
+	ushort res0;		/* reserved */
+	uint   bd_cnt;		/* internal byte count */
+	uint   s_ptr;		/* source internal data pointer */
+	uint   d_ptr;		/* destination internal data pointer */
+	uint   istate;		/* internal state */
+	u_char res1[20];	/* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB		((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP		((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2		((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK	((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64	((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128	((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256	((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512	((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024	((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048	((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC		((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC		((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM		((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT		((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK	((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM	((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM	((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER	((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+	uint flags;
+	uint len;	/* data length */
+	uint src;	/* source data buffer pointer */
+	uint dst;	/* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V	((uint)0x80000000)	/* valid */
+#define IDMA_BD_W	((uint)0x20000000)	/* wrap */
+#define IDMA_BD_I	((uint)0x10000000)	/* interrupt */
+#define IDMA_BD_L	((uint)0x08000000)	/* last */
+#define IDMA_BD_CM	((uint)0x02000000)	/* continuous mode */
+#define IDMA_BD_SDN	((uint)0x00400000)	/* source done */
+#define IDMA_BD_DDN	((uint)0x00200000)	/* destination done */
+#define IDMA_BD_DGBL	((uint)0x00100000)	/* destination global */
+#define IDMA_BD_DBO_LE	((uint)0x00040000)	/* little-end dest byte order */
+#define IDMA_BD_DBO_BE	((uint)0x00080000)	/* big-end dest byte order */
+#define IDMA_BD_DDTB	((uint)0x00010000)	/* destination data bus */
+#define IDMA_BD_SGBL	((uint)0x00002000)	/* source global */
+#define IDMA_BD_SBO_LE	((uint)0x00000800)	/* little-end src byte order */
+#define IDMA_BD_SBO_BE	((uint)0x00001000)	/* big-end src byte order */
+#define IDMA_BD_SDTB	((uint)0x00000200)	/* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+	u_char idsr;			/* IDMAn event status register */
+	u_char res0[3];
+	u_char idmr;			/* IDMAn event mask register */
+	u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC	((unsigned char)0x08)	/* stop completed */
+#define IDMA_EVENT_OB	((unsigned char)0x04)	/* out of buffers */
+#define IDMA_EVENT_EDN	((unsigned char)0x02)	/* external DONE asserted */
+#define IDMA_EVENT_BC	((unsigned char)0x01)	/* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME	((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK	((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M	((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M	((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M	((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M	((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK	((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED	((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW	((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK	((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED	((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW	((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK	((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED	((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW	((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK	((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED	((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW	((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE	((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD	((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK	((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB	((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB	((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB	((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB	((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB	((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB	((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB	((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0	((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1	((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2	((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3	((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01	((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23	((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
+#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
+#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
+#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
+#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
+#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
+#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
+#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
+#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
+#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
+#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
+#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
+
+
diff --git a/include/asm-ppc/cputable.h b/include/asm-ppc/cputable.h
new file mode 100644
index 000000000000..22de04fe1b4c
--- /dev/null
+++ b/include/asm-ppc/cputable.h
@@ -0,0 +1,127 @@
+/*
+ *  include/asm-ppc/cputable.h
+ *
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_CPUTABLE_H
+#define __ASM_PPC_CPUTABLE_H
+
+/* Exposed to userland CPU features */
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+#define PPC_FEATURE_HAS_SPE		0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mecanism.
+ */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+
+struct cpu_spec {
+	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
+	unsigned int	pvr_mask;
+	unsigned int	pvr_value;
+
+	char		*cpu_name;
+	unsigned int	cpu_features;		/* Kernel features */
+	unsigned int	cpu_user_features;	/* Userland features */
+
+	/* cache line sizes */
+	unsigned int	icache_bsize;
+	unsigned int	dcache_bsize;
+
+	/* number of performance monitor counters */
+	unsigned int	num_pmcs;
+
+	/* this is called to initialize various CPU bits like L1 cache,
+	 * BHT, SPD, etc... from head.S before branching to identify_machine
+	 */
+	cpu_setup_t	cpu_setup;
+};
+
+extern struct cpu_spec		cpu_specs[];
+extern struct cpu_spec		*cur_cpu_spec[];
+
+static inline unsigned int cpu_has_feature(unsigned int feature)
+{
+	return cur_cpu_spec[0]->cpu_features & feature;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+#define CPU_FTR_SPLIT_ID_CACHE		0x00000001
+#define CPU_FTR_L2CR			0x00000002
+#define CPU_FTR_SPEC7450		0x00000004
+#define CPU_FTR_ALTIVEC			0x00000008
+#define CPU_FTR_TAU			0x00000010
+#define CPU_FTR_CAN_DOZE		0x00000020
+#define CPU_FTR_USE_TB			0x00000040
+#define CPU_FTR_604_PERF_MON		0x00000080
+#define CPU_FTR_601			0x00000100
+#define CPU_FTR_HPTE_TABLE		0x00000200
+#define CPU_FTR_CAN_NAP			0x00000400
+#define CPU_FTR_L3CR			0x00000800
+#define CPU_FTR_L3_DISABLE_NAP		0x00001000
+#define CPU_FTR_NAP_DISABLE_L2_PR	0x00002000
+#define CPU_FTR_DUAL_PLL_750FX		0x00004000
+#define CPU_FTR_NO_DPM			0x00008000
+#define CPU_FTR_HAS_HIGH_BATS		0x00010000
+#define CPU_FTR_NEED_COHERENT           0x00020000
+#define CPU_FTR_NO_BTIC			0x00040000
+
+#ifdef __ASSEMBLY__
+
+#define BEGIN_FTR_SECTION		98:
+
+#define END_FTR_SECTION(msk, val)		\
+99:						\
+	.section __ftr_fixup,"a";		\
+	.align 2;				\
+	.long msk;				\
+	.long val;				\
+	.long 98b;				\
+	.long 99b;				\
+	.previous
+
+#else
+
+#define BEGIN_FTR_SECTION		"98:\n"
+#define END_FTR_SECTION(msk, val)		\
+"99:\n"						\
+"	.section __ftr_fixup,\"a\";\n"		\
+"	.align 2;\n"				\
+"	.long "#msk";\n"			\
+"	.long "#val";\n"			\
+"	.long 98b;\n"			        \
+"	.long 99b;\n"	 		        \
+"	.previous\n"
+
+
+#endif /* __ASSEMBLY__ */
+
+#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
+
+#endif /* __ASM_PPC_CPUTABLE_H */
+#endif /* __KERNEL__ */
+
diff --git a/include/asm-ppc/cputime.h b/include/asm-ppc/cputime.h
new file mode 100644
index 000000000000..8e9faf5ce720
--- /dev/null
+++ b/include/asm-ppc/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __PPC_CPUTIME_H
+#define __PPC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __PPC_CPUTIME_H */
diff --git a/include/asm-ppc/current.h b/include/asm-ppc/current.h
new file mode 100644
index 000000000000..8d41501ba10d
--- /dev/null
+++ b/include/asm-ppc/current.h
@@ -0,0 +1,11 @@
+#ifdef __KERNEL__
+#ifndef _PPC_CURRENT_H
+#define _PPC_CURRENT_H
+
+/*
+ * We keep `current' in r2 for speed.
+ */
+register struct task_struct *current asm ("r2");
+
+#endif /* !(_PPC_CURRENT_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h
new file mode 100644
index 000000000000..6047f288c70b
--- /dev/null
+++ b/include/asm-ppc/dbdma.h
@@ -0,0 +1,102 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers.  All little-endian.
+ */
+struct dbdma_regs {
+    unsigned int control;	/* lets you change bits in status */
+    unsigned int status;	/* DMA and device status bits (see below) */
+    unsigned int cmdptr_hi;	/* upper 32 bits of command address */
+    unsigned int cmdptr;	/* (lower 32 bits of) command address (phys) */
+    unsigned int intr_sel;	/* select interrupt condition bit */
+    unsigned int br_sel;	/* select branch condition bit */
+    unsigned int wait_sel;	/* select wait condition bit */
+    unsigned int xfer_mode;
+    unsigned int data2ptr_hi;
+    unsigned int data2ptr;
+    unsigned int res1;
+    unsigned int address_hi;
+    unsigned int br_addr_hi;
+    unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN	0x8000
+#define PAUSE	0x4000
+#define FLUSH	0x2000
+#define WAKE	0x1000
+#define DEAD	0x0800
+#define ACTIVE	0x0400
+#define BT	0x0100
+#define DEVSTAT	0x00ff
+
+/*
+ * DBDMA command structure.  These fields are all little-endian!
+ */
+struct dbdma_cmd {
+    unsigned short req_count;	/* requested byte transfer count */
+    unsigned short command;	/* command word (has bit-fields) */
+    unsigned int   phy_addr;	/* physical data address */
+    unsigned int   cmd_dep;	/* command-dependent field */
+    unsigned short res_count;	/* residual count after completion */
+    unsigned short xfer_status;	/* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE	0	/* transfer memory data to stream */
+#define OUTPUT_LAST	0x1000	/* ditto followed by end marker */
+#define INPUT_MORE	0x2000	/* transfer stream data to memory */
+#define INPUT_LAST	0x3000	/* ditto, expect end marker */
+#define STORE_WORD	0x4000	/* write word (4 bytes) to device reg */
+#define LOAD_WORD	0x5000	/* read word (4 bytes) from device reg */
+#define DBDMA_NOP	0x6000	/* do nothing */
+#define DBDMA_STOP	0x7000	/* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0	0	/* usual data stream */
+#define KEY_STREAM1	0x100	/* control/status stream */
+#define KEY_STREAM2	0x200	/* device-dependent stream */
+#define KEY_STREAM3	0x300	/* device-dependent stream */
+#define KEY_REGS	0x500	/* device register space */
+#define KEY_SYSTEM	0x600	/* system memory-mapped space */
+#define KEY_DEVICE	0x700	/* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER	0	/* don't interrupt */
+#define INTR_IFSET	0x10	/* intr if condition bit is 1 */
+#define INTR_IFCLR	0x20	/* intr if condition bit is 0 */
+#define INTR_ALWAYS	0x30	/* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER	0	/* don't branch */
+#define BR_IFSET	0x4	/* branch if condition bit is 1 */
+#define BR_IFCLR	0x8	/* branch if condition bit is 0 */
+#define BR_ALWAYS	0xc	/* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER	0	/* don't wait */
+#define WAIT_IFSET	1	/* wait if condition bit is 1 */
+#define WAIT_IFCLR	2	/* wait if condition bit is 0 */
+#define WAIT_ALWAYS	3	/* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x)	(((unsigned)(x) + sizeof(struct dbdma_cmd) - 1) \
+			 & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do {				\
+	out_le32(&((regs)->control), (RUN|FLUSH)<<16);		\
+	while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))	\
+		;						\
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/delay.h b/include/asm-ppc/delay.h
new file mode 100644
index 000000000000..badde6845af2
--- /dev/null
+++ b/include/asm-ppc/delay.h
@@ -0,0 +1,66 @@
+#ifdef __KERNEL__
+#ifndef _PPC_DELAY_H
+#define _PPC_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+extern unsigned long loops_per_jiffy;
+
+extern void __delay(unsigned int loops);
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mulhwu instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ *  -- paulus
+ */
+#define __MAX_UDELAY	(226050910UL/HZ)	/* maximum udelay argument */
+#define __MAX_NDELAY	(4294967295UL/HZ)	/* maximum ndelay argument */
+
+extern __inline__ void __udelay(unsigned int x)
+{
+	unsigned int loops;
+
+	__asm__("mulhwu %0,%1,%2" : "=r" (loops) :
+		"r" (x), "r" (loops_per_jiffy * 226));
+	__delay(loops);
+}
+
+extern __inline__ void __ndelay(unsigned int x)
+{
+	unsigned int loops;
+
+	__asm__("mulhwu %0,%1,%2" : "=r" (loops) :
+		"r" (x), "r" (loops_per_jiffy * 5));
+	__delay(loops);
+}
+
+extern void __bad_udelay(void);		/* deliberately undefined */
+extern void __bad_ndelay(void);		/* deliberately undefined */
+
+#define udelay(n) (__builtin_constant_p(n)? \
+	((n) > __MAX_UDELAY? __bad_udelay(): __udelay((n) * (19 * HZ))) : \
+	__udelay((n) * (19 * HZ)))
+
+#define ndelay(n) (__builtin_constant_p(n)? \
+	((n) > __MAX_NDELAY? __bad_ndelay(): __ndelay((n) * HZ)) : \
+	__ndelay((n) * HZ))
+
+#endif /* defined(_PPC_DELAY_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/div64.h b/include/asm-ppc/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-ppc/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-ppc/dma-mapping.h
new file mode 100644
index 000000000000..7f0487afebbe
--- /dev/null
+++ b/include/asm-ppc/dma-mapping.h
@@ -0,0 +1,236 @@
+/*
+ * This is based on both include/asm-sh/dma-mapping.h and
+ * include/asm-ppc/pci.h
+ */
+#ifndef __ASM_PPC_DMA_MAPPING_H
+#define __ASM_PPC_DMA_MAPPING_H
+
+#include <linux/config.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping.  These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices.  Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+#define dma_cache_inv(_start,_size) \
+	invalidate_dcache_range(_start, (_start + _size))
+#define dma_cache_wback(_start,_size) \
+	clean_dcache_range(_start, (_start + _size))
+#define dma_cache_wback_inv(_start,_size) \
+	flush_dcache_range(_start, (_start + _size))
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		do { } while (0)
+#define __dma_sync(addr, size, rw)		do { } while (0)
+#define __dma_sync_page(pg, off, sz, rw)	do { } while (0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t * dma_handle, int gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+	void *ret;
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+
+	return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(ptr, size, direction);
+
+	return virt_to_bus(ptr);
+}
+
+/* We do nothing. */
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync_page(page, offset, size, direction);
+
+	return (page - mem_map) * PAGE_SIZE + PCI_DRAM_OFFSET + offset;
+}
+
+/* We do nothing. */
+#define dma_unmap_page(dev, handle, size, dir)	do { } while (0)
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++, sg++) {
+		BUG_ON(!sg->page);
+		__dma_sync_page(sg->page, sg->offset, sg->length, direction);
+		sg->dma_address = page_to_bus(sg->page) + sg->offset;
+	}
+
+	return nents;
+}
+
+/* We don't do anything here. */
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+			size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction direction)
+{
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++, sg++)
+		__dma_sync_page(sg->page, sg->offset, sg->length, direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction direction)
+{
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++, sg++)
+		__dma_sync_page(sg->page, sg->offset, sg->length, direction);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d)	(0)
+#else
+#define dma_is_consistent(d)	(1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+		      	      unsigned long offset, size_t size,
+		      	      enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+		    		 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(void *vaddr, size_t size,
+				  enum dma_data_direction direction)
+{
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+#endif				/* __ASM_PPC_DMA_MAPPING_H */
diff --git a/include/asm-ppc/dma.h b/include/asm-ppc/dma.h
new file mode 100644
index 000000000000..cc8e5cd8c9d2
--- /dev/null
+++ b/include/asm-ppc/dma.h
@@ -0,0 +1,371 @@
+/*
+ * include/asm-ppc/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes.  There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform.  Take what you read
+ * with a grain of salt.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS		0xFFFFFFFF
+
+/* in arch/ppc/kernel/setup.c -- Cort */
+extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ;
+extern unsigned long ISA_DMA_THRESHOLD;
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* see prep_setup_arch() for detailed informations */
+#if defined(CONFIG_SOUND_CS4232) && defined(CONFIG_PPC_PREP)
+extern long ppc_cs4232_dma, ppc_cs4232_dma2;
+#define SND_DMA1 ppc_cs4232_dma
+#define SND_DMA2 ppc_cs4232_dma2
+#else
+#define SND_DMA1 -1
+#define SND_DMA2 -1
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
+#define DMA_LO_PAGE_1		0x83
+#define DMA_LO_PAGE_2		0x81
+#define DMA_LO_PAGE_3		0x82
+#define DMA_LO_PAGE_5		0x8B
+#define DMA_LO_PAGE_6		0x89
+#define DMA_LO_PAGE_7		0x8A
+
+#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
+#define DMA_HI_PAGE_1		0x483
+#define DMA_HI_PAGE_2		0x481
+#define DMA_HI_PAGE_3		0x482
+#define DMA_HI_PAGE_5		0x48B
+#define DMA_HI_PAGE_6		0x489
+#define DMA_HI_PAGE_7		0x48A
+
+#define DMA1_EXT_REG		0x40B
+#define DMA2_EXT_REG		0x4D6
+
+#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+#define DMA_AUTOINIT		0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd = 0x00;
+
+	if (dmanr != 4) {
+		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
+	}
+	if (dmanr <= 3) {
+		dma_outb(dmanr, DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
+	} else
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_LO_PAGE_0);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_LO_PAGE_1);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_LO_PAGE_2);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_LO_PAGE_3);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+		break;
+	case 5:
+		if (SND_DMA1 == 5 || SND_DMA2 == 5)
+			dma_outb(pagenr, DMA_LO_PAGE_5);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+		break;
+	case 6:
+		if (SND_DMA1 == 6 || SND_DMA2 == 6)
+			dma_outb(pagenr, DMA_LO_PAGE_6);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+		break;
+	case 7:
+		if (SND_DMA1 == 7 || SND_DMA2 == 7)
+			dma_outb(pagenr, DMA_LO_PAGE_7);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+		break;
+	}
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3) {
+		dma_outb(phys & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+		dma_outb(phys & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((dmanr & 3), DMA2_EXT_REG);
+	} else {
+		dma_outb((phys >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+	set_dma_page(dmanr, phys >> 16);
+}
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3) {
+		dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 1) + 1 +
+			 IO_DMA1_BASE);
+	} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+		dma_outb(count & 0xff, ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 2) + 2 +
+			 IO_DMA2_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff, ((dmanr & 3) << 2) + 2 +
+			 IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff, ((dmanr & 3) << 2) + 2 +
+			 IO_DMA2_BASE);
+	}
+}
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr <= 3) ?
+	    ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3 || dmanr == SND_DMA1 || dmanr == SND_DMA2)
+	    ? count : (count << 1);
+
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+#endif				/* _ASM_DMA_H */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h
new file mode 100644
index 000000000000..2c056966efd3
--- /dev/null
+++ b/include/asm-ppc/elf.h
@@ -0,0 +1,160 @@
+#ifndef __PPC_ELF_H
+#define __PPC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+/* Keep this the last entry.  */
+#define R_PPC_NUM		37
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+#define ELF_NVRREG	33	/* includes vscr */
+#define ELF_NEVRREG	34	/* includes acc (as 2) */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_PPC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PPC)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+#define ELF_CORE_COPY_REGS(gregs, regs)				\
+	memcpy((gregs), (regs), sizeof(struct pt_regs));	\
+	memset((char *)(gregs) + sizeof(struct pt_regs), 0,	\
+	       sizeof(elf_gregset_t) - sizeof(struct pt_regs));
+
+#define ELF_CORE_COPY_TASK_REGS(t, elfregs)			\
+	((t)->thread.regs?					\
+	 ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0)
+
+extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
+#define ELF_CORE_COPY_FPREGS(t, fpu)	dump_task_fpu((t), (fpu))
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(cur_cpu_spec[0]->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+ } while (0)
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-ppc/errno.h b/include/asm-ppc/errno.h
new file mode 100644
index 000000000000..19f20bd41ae6
--- /dev/null
+++ b/include/asm-ppc/errno.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_ERRNO_H
+#define _PPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef	EDEADLOCK
+#define	EDEADLOCK	58	/* File locking deadlock error */
+
+#define _LAST_ERRNO	516
+
+#endif
diff --git a/include/asm-ppc/fcntl.h b/include/asm-ppc/fcntl.h
new file mode 100644
index 000000000000..5e28e41fb29f
--- /dev/null
+++ b/include/asm-ppc/fcntl.h
@@ -0,0 +1,93 @@
+#ifndef _PPC_FCNTL_H
+#define _PPC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY      040000	/* must be a directory */
+#define O_NOFOLLOW      0100000	/* don't follow links */
+#define O_LARGEFILE     0200000
+#define O_DIRECT	0400000	/* direct disk access hint */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+#ifdef __KERNEL__
+#define F_POSIX		1
+#define F_FLOCK		2
+#define F_BROKEN	4	/* broken flock() emulation */
+#endif /* __KERNEL__ */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif
diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h
new file mode 100644
index 000000000000..8ccd4a276fe9
--- /dev/null
+++ b/include/asm-ppc/floppy.h
@@ -0,0 +1,182 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_FLOPPY_H
+#define __ASM_PPC_FLOPPY_H
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value,port)	outb_p(value,port)
+
+#define fd_disable_dma()	fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
+#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
+#define fd_dma_setup(addr, size, mode, io) fd_ops->_dma_setup(addr, size, mode, io)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+	void (*_disable_dma)(unsigned int dmanr);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	unsigned char st;
+	int lcount;
+	char *lptr;
+
+	if (!doing_vdma)
+		return floppy_interrupt(irq, dev_id, regs);
+
+
+	st = 1;
+	for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+	     lcount; lcount--, lptr++) {
+		st=inb(virtual_dma_port+4) & 0xa0 ;
+		if (st != 0xa0)
+			break;
+		if (virtual_dma_mode)
+			outb_p(*lptr, virtual_dma_port+5);
+		else
+			*lptr = inb_p(virtual_dma_port+5);
+	}
+	virtual_dma_count = lcount;
+	virtual_dma_addr = lptr;
+	st = inb(virtual_dma_port+4);
+
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+		doing_vdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+	return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+	doing_vdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+						   SA_INTERRUPT|SA_SAMPLE_RANDOM,
+						   "floppy", NULL);
+
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_vdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	/* actual, physical DMA */
+	doing_vdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,(unsigned int)virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+static struct fd_dma_ops real_dma_ops =
+{
+	._disable_dma = disable_dma,
+	._free_dma = free_dma,
+	._get_dma_residue = get_dma_residue,
+	._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+	._disable_dma = vdma_disable_dma,
+	._free_dma = vdma_nop,
+	._get_dma_residue = vdma_get_dma_residue,
+	._dma_setup = vdma_dma_setup
+};
+
+static int fd_request_dma()
+{
+	if (can_use_virtual_dma & 1) {
+		fd_ops = &virt_dma_ops;
+		return 0;
+	}
+	else {
+		fd_ops = &real_dma_ops;
+		return request_dma(FLOPPY_DMA, "floppy");
+	}
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2			/* Don't change this! */
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s)	(0)
+
+#endif /* __ASM_PPC_FLOPPY_H */
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/fsl_ocp.h b/include/asm-ppc/fsl_ocp.h
new file mode 100644
index 000000000000..050fbba8d049
--- /dev/null
+++ b/include/asm-ppc/fsl_ocp.h
@@ -0,0 +1,54 @@
+/*
+ * include/asm-ppc/fsl_ocp.h
+ *
+ * Definitions for the on-chip peripherals on Freescale PPC processors
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_FS_OCP_H__
+#define __ASM_FS_OCP_H__
+
+/* A table of information for supporting the Gianfar Ethernet Controller
+ * This helps identify which enet controller we are dealing with,
+ * and what type of enet controller it is
+ */
+struct ocp_gfar_data {
+	uint interruptTransmit;
+	uint interruptError;
+	uint interruptReceive;
+	uint interruptPHY;
+	uint flags;
+	uint phyid;
+	uint phyregidx;
+	unsigned char mac_addr[6];
+};
+
+/* Flags in the flags field */
+#define GFAR_HAS_COALESCE		0x20
+#define GFAR_HAS_RMON			0x10
+#define GFAR_HAS_MULTI_INTR		0x08
+#define GFAR_FIRM_SET_MACADDR		0x04
+#define GFAR_HAS_PHY_INTR		0x02	/* if not set use a timer */
+#define GFAR_HAS_GIGABIT		0x01
+
+/* Data structure for I2C support.  Just contains a couple flags
+ * to distinguish various I2C implementations*/
+struct ocp_fs_i2c_data {
+	uint flags;
+};
+
+/* Flags for I2C */
+#define FS_I2C_SEPARATE_DFSRR	0x02
+#define FS_I2C_CLOCK_5200	0x01
+
+#endif	/* __ASM_FS_OCP_H__ */
+#endif	/* __KERNEL__ */
diff --git a/include/asm-ppc/gg2.h b/include/asm-ppc/gg2.h
new file mode 100644
index 000000000000..341ae55b99fb
--- /dev/null
+++ b/include/asm-ppc/gg2.h
@@ -0,0 +1,61 @@
+/*
+ *  include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	The VAS96011/12 Chipset, Data Book, Edition 1.0
+ *	VLSI Technology, Inc.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_GG2_H
+#define _ASMPPC_GG2_H
+
+    /*
+     *  Memory Map (CHRP mode)
+     */
+
+#define GG2_PCI_MEM_BASE	0xc0000000	/* Peripheral memory space */
+#define GG2_ISA_MEM_BASE	0xf7000000	/* Peripheral memory alias */
+#define GG2_ISA_IO_BASE		0xf8000000	/* Peripheral I/O space */
+#define GG2_PCI_CONFIG_BASE	0xfec00000	/* PCI configuration space */
+#define GG2_INT_ACK_SPECIAL	0xfec80000	/* Interrupt acknowledge and */
+						/* special PCI cycles */
+#define GG2_ROM_BASE0		0xff000000	/* ROM bank 0 */
+#define GG2_ROM_BASE1		0xff800000	/* ROM bank 1 */
+
+
+    /*
+     *  GG2 specific PCI Registers
+     */
+
+extern void __iomem *gg2_pci_config_base;	/* kernel virtual address */
+
+#define GG2_PCI_BUSNO		0x40	/* Bus number */
+#define GG2_PCI_SUBBUSNO	0x41	/* Subordinate bus number */
+#define GG2_PCI_DISCCTR		0x42	/* Disconnect counter */
+#define GG2_PCI_PPC_CTRL	0x50	/* PowerPC interface control register */
+#define GG2_PCI_ADDR_MAP	0x5c	/* Address map */
+#define GG2_PCI_PCI_CTRL	0x60	/* PCI interface control register */
+#define GG2_PCI_ROM_CTRL	0x70	/* ROM interface control register */
+#define GG2_PCI_ROM_TIME	0x74	/* ROM timing */
+#define GG2_PCI_CC_CTRL		0x80	/* Cache controller control register */
+#define GG2_PCI_DRAM_BANK0	0x90	/* Control register for DRAM bank #0 */
+#define GG2_PCI_DRAM_BANK1	0x94	/* Control register for DRAM bank #1 */
+#define GG2_PCI_DRAM_BANK2	0x98	/* Control register for DRAM bank #2 */
+#define GG2_PCI_DRAM_BANK3	0x9c	/* Control register for DRAM bank #3 */
+#define GG2_PCI_DRAM_BANK4	0xa0	/* Control register for DRAM bank #4 */
+#define GG2_PCI_DRAM_BANK5	0xa4	/* Control register for DRAM bank #5 */
+#define GG2_PCI_DRAM_TIME0	0xb0	/* Timing parameters set #0 */
+#define GG2_PCI_DRAM_TIME1	0xb4	/* Timing parameters set #1 */
+#define GG2_PCI_DRAM_CTRL	0xc0	/* DRAM control */
+#define GG2_PCI_ERR_CTRL	0xd0	/* Error control register */
+#define GG2_PCI_ERR_STATUS	0xd4	/* Error status register */
+					/* Cleared when read */
+
+#endif /* _ASMPPC_GG2_H */
diff --git a/include/asm-ppc/gt64260.h b/include/asm-ppc/gt64260.h
new file mode 100644
index 000000000000..cd0ef644943d
--- /dev/null
+++ b/include/asm-ppc/gt64260.h
@@ -0,0 +1,322 @@
+/*
+ * include/asm-ppc/gt64260.h
+ *
+ * Prototypes, etc. for the Marvell/Galileo GT64260 host bridge routines.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_GT64260_H
+#define __ASMPPC_GT64260_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/gt64260_defs.h>
+
+
+extern u32     gt64260_base;
+extern u32     gt64260_irq_base;     /* We handle the next 96 IRQs from here */
+extern u32     gt64260_revision;
+extern u8      gt64260_pci_exclude_bridge;
+
+#ifndef	TRUE
+#define	TRUE	1
+#endif
+
+#ifndef	FALSE
+#define	FALSE	0
+#endif
+
+/* IRQs defined by the 64260 */
+#define	GT64260_IRQ_MPSC0		40
+#define	GT64260_IRQ_MPSC1		42
+#define	GT64260_IRQ_SDMA		36
+
+/*
+ * Define a default physical memory map to be set up on the bridge.
+ * Also define a struct to pass that info from board-specific routines to
+ * GT64260 generic set up routines.  By passing this info in, the board
+ * support developer can modify it at will.
+ */
+
+/*
+ * This is the default memory map:
+ *			CPU			PCI
+ *			---			---
+ * PCI 0 I/O:	0xfa000000-0xfaffffff	0x00000000-0x00ffffff
+ * PCI 1 I/O:	0xfb000000-0xfbffffff	0x01000000-0x01ffffff
+ * PCI 0 MEM:	0x80000000-0x8fffffff	0x80000000-0x8fffffff
+ * PCI 1 MEM:	0x90000000-0x9fffffff	0x90000000-0x9fffffff
+ */
+
+/* Default physical memory map for the GT64260 bridge */
+
+/*
+ * PCI Bus 0 Definitions
+ */
+#define GT64260_PCI_0_IO_SIZE		0x01000000U
+#define	GT64260_PCI_0_MEM_SIZE		0x10000000U
+
+/* Processor Physical addresses */
+#define	GT64260_PCI_0_IO_START_PROC	0xfa000000U
+#define	GT64260_PCI_0_IO_END_PROC	(GT64260_PCI_0_IO_START_PROC + \
+					 GT64260_PCI_0_IO_SIZE - 1)
+
+/* PCI 0 addresses */
+#define	GT64260_PCI_0_IO_START		0x00000000U
+#define	GT64260_PCI_0_IO_END		(GT64260_PCI_0_IO_START + \
+					 GT64260_PCI_0_IO_SIZE - 1)
+
+/* Processor Physical addresses */
+#define	GT64260_PCI_0_MEM_START_PROC	0x80000000U
+#define	GT64260_PCI_0_MEM_END_PROC	(GT64260_PCI_0_MEM_START_PROC + \
+					 GT64260_PCI_0_MEM_SIZE - 1)
+
+/* PCI 0 addresses */
+#define	GT64260_PCI_0_MEM_START		0x80000000U
+#define	GT64260_PCI_0_MEM_END		(GT64260_PCI_0_MEM_START + \
+					 GT64260_PCI_0_MEM_SIZE - 1)
+
+/*
+ * PCI Bus 1 Definitions
+ */
+#define GT64260_PCI_1_IO_SIZE		0x01000000U
+#define	GT64260_PCI_1_MEM_SIZE		0x10000000U
+
+/* PCI 1 addresses */
+#define	GT64260_PCI_1_IO_START		0x01000000U
+#define	GT64260_PCI_1_IO_END		(GT64260_PCI_1_IO_START + \
+					 GT64260_PCI_1_IO_SIZE - 1)
+
+/* Processor Physical addresses */
+#define	GT64260_PCI_1_IO_START_PROC	0xfb000000U
+#define	GT64260_PCI_1_IO_END_PROC	(GT64260_PCI_1_IO_START_PROC + \
+					 GT64260_PCI_1_IO_SIZE - 1)
+
+/* PCI 1 addresses */
+#define	GT64260_PCI_1_MEM_START		0x90000000U
+#define	GT64260_PCI_1_MEM_END		(GT64260_PCI_1_MEM_START + \
+					 GT64260_PCI_1_MEM_SIZE - 1)
+
+/* Processor Physical addresses */
+#define	GT64260_PCI_1_MEM_START_PROC	0x90000000U
+#define	GT64260_PCI_1_MEM_END_PROC	(GT64260_PCI_1_MEM_START_PROC + \
+					 GT64260_PCI_1_MEM_SIZE - 1)
+
+/* Define struct to pass mem-map info into gt64260_common.c code */
+typedef struct {
+	struct pci_controller	*hose_a;
+	struct pci_controller	*hose_b;
+
+	u32	mem_size;
+
+	u32	pci_0_io_start_proc;
+	u32	pci_0_io_start_pci;
+	u32	pci_0_io_size;
+	u32	pci_0_io_swap;
+
+	u32	pci_0_mem_start_proc;
+	u32	pci_0_mem_start_pci_hi;
+	u32	pci_0_mem_start_pci_lo;
+	u32	pci_0_mem_size;
+	u32	pci_0_mem_swap;
+
+	u32	pci_1_io_start_proc;
+	u32	pci_1_io_start_pci;
+	u32	pci_1_io_size;
+	u32	pci_1_io_swap;
+
+	u32	pci_1_mem_start_proc;
+	u32	pci_1_mem_start_pci_hi;
+	u32	pci_1_mem_start_pci_lo;
+	u32	pci_1_mem_size;
+	u32	pci_1_mem_swap;
+} gt64260_bridge_info_t;
+
+#define	GT64260_BRIDGE_INFO_DEFAULT(ip, ms) {				\
+	(ip)->mem_size = (ms);						\
+									\
+	(ip)->pci_0_io_start_proc = GT64260_PCI_0_IO_START_PROC;	\
+	(ip)->pci_0_io_start_pci  = GT64260_PCI_0_IO_START;		\
+	(ip)->pci_0_io_size	  = GT64260_PCI_0_IO_SIZE;		\
+	(ip)->pci_0_io_swap	  = GT64260_CPU_PCI_SWAP_NONE;		\
+									\
+	(ip)->pci_0_mem_start_proc   = GT64260_PCI_0_MEM_START_PROC;	\
+	(ip)->pci_0_mem_start_pci_hi = 0x00000000;			\
+	(ip)->pci_0_mem_start_pci_lo = GT64260_PCI_0_MEM_START;		\
+	(ip)->pci_0_mem_size	     = GT64260_PCI_0_MEM_SIZE;		\
+	(ip)->pci_0_mem_swap	     = GT64260_CPU_PCI_SWAP_NONE;	\
+									\
+	(ip)->pci_1_io_start_proc = GT64260_PCI_1_IO_START_PROC;	\
+	(ip)->pci_1_io_start_pci  = GT64260_PCI_1_IO_START;		\
+	(ip)->pci_1_io_size	  = GT64260_PCI_1_IO_SIZE;		\
+	(ip)->pci_1_io_swap	  = GT64260_CPU_PCI_SWAP_NONE;		\
+									\
+	(ip)->pci_1_mem_start_proc   = GT64260_PCI_1_MEM_START_PROC;	\
+	(ip)->pci_1_mem_start_pci_hi = 0x00000000;			\
+	(ip)->pci_1_mem_start_pci_lo = GT64260_PCI_1_MEM_START;		\
+	(ip)->pci_1_mem_size	     = GT64260_PCI_1_MEM_SIZE;		\
+	(ip)->pci_1_mem_swap	     = GT64260_CPU_PCI_SWAP_NONE;	\
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I/O macros to access the 64260's registers
+ *
+ *****************************************************************************
+ */
+
+extern inline uint32_t gt_read(uint32_t offs){
+	return (in_le32((volatile uint *)(gt64260_base + offs)));
+}
+extern inline void gt_write(uint32_t offs, uint32_t d){
+	out_le32((volatile uint *)(gt64260_base + offs), d);
+}
+
+#if 0 /* paranoid SMP version */
+extern inline void gt_modify(u32 offs, u32 data, u32 mask) \
+{
+	uint32_t reg;
+	spin_lock(&gt64260_lock);
+	reg = gt_read(offs) & (~mask); /* zero any bits we care about*/
+	reg |= data & mask; /* set bits from the data */
+	gt_write(offs, reg);
+	spin_unlock(&gt64260_lock);
+}
+#else
+extern inline void gt_modify(uint32_t offs, uint32_t data, uint32_t mask)
+{
+	uint32_t reg;
+	reg = gt_read(offs) & (~(mask)); /* zero any bits we care about*/
+	reg |= (data) & (mask); /* set bits from the data */
+	gt_write(offs, reg);
+}
+#endif
+#define	gt_set_bits(offs, bits) gt_modify(offs, ~0, bits)
+
+#define	gt_clr_bits(offs, bits) gt_modify(offs, 0, bits)
+
+
+/*
+ *****************************************************************************
+ *
+ *	Function Prototypes
+ *
+ *****************************************************************************
+ */
+
+int gt64260_find_bridges(u32 phys_base_addr, gt64260_bridge_info_t *info,
+	int ((*map_irq)(struct pci_dev *, unsigned char, unsigned char)));
+int gt64260_bridge_init(gt64260_bridge_info_t *info);
+int gt64260_cpu_scs_set_window(u32 window,
+			       u32 base_addr,
+			       u32 size);
+int gt64260_cpu_cs_set_window(u32 window,
+			      u32 base_addr,
+			      u32 size);
+int gt64260_cpu_boot_set_window(u32 base_addr,
+			        u32 size);
+int gt64260_cpu_set_pci_io_window(u32 pci_bus,
+			          u32 cpu_base_addr,
+			          u32 pci_base_addr,
+			          u32 size,
+			          u32 swap);
+int gt64260_cpu_set_pci_mem_window(u32 pci_bus,
+			           u32 window,
+			           u32 cpu_base_addr,
+			           u32 pci_base_addr_hi,
+			           u32 pci_base_addr_lo,
+			           u32 size,
+			           u32 swap_64bit);
+int gt64260_cpu_prot_set_window(u32 window,
+			        u32 base_addr,
+			        u32 size,
+			        u32 access_bits);
+int gt64260_cpu_snoop_set_window(u32 window,
+			         u32 base_addr,
+			         u32 size,
+			         u32  snoop_type);
+void gt64260_cpu_disable_all_windows(void);
+int gt64260_pci_bar_enable(u32 pci_bus, u32 enable_bits);
+int gt64260_pci_slave_scs_set_window(struct pci_controller *hose,
+				     u32 window,
+				     u32 pci_base_addr,
+				     u32 cpu_base_addr,
+				     u32 size);
+int gt64260_pci_slave_cs_set_window(struct pci_controller *hose,
+				    u32 window,
+				    u32 pci_base_addr,
+				    u32 cpu_base_addr,
+				    u32 size);
+int gt64260_pci_slave_boot_set_window(struct pci_controller *hose,
+				      u32 pci_base_addr,
+				      u32 cpu_base_addr,
+				      u32 size);
+int gt64260_pci_slave_p2p_mem_set_window(struct pci_controller *hose,
+				         u32 window,
+				         u32 pci_base_addr,
+				         u32 other_bus_base_addr,
+				         u32 size);
+int gt64260_pci_slave_p2p_io_set_window(struct pci_controller *hose,
+				        u32 pci_base_addr,
+				        u32 other_bus_base_addr,
+				        u32 size);
+int gt64260_pci_slave_dac_scs_set_window(struct pci_controller *hose,
+				         u32 window,
+				         u32 pci_base_addr_hi,
+				         u32 pci_base_addr_lo,
+				         u32 cpu_base_addr,
+				         u32 size);
+int gt64260_pci_slave_dac_cs_set_window(struct pci_controller *hose,
+				        u32 window,
+				        u32 pci_base_addr_hi,
+				        u32 pci_base_addr_lo,
+				        u32 cpu_base_addr,
+				        u32 size);
+int gt64260_pci_slave_dac_boot_set_window(struct pci_controller *hose,
+				          u32 pci_base_addr_hi,
+				          u32 pci_base_addr_lo,
+				          u32 cpu_base_addr,
+				          u32 size);
+int gt64260_pci_slave_dac_p2p_mem_set_window(struct pci_controller *hose,
+				             u32 window,
+				             u32 pci_base_addr_hi,
+				             u32 pci_base_addr_lo,
+				             u32 other_bus_base_addr,
+				             u32 size);
+int gt64260_pci_acc_cntl_set_window(u32 pci_bus,
+			            u32 window,
+			            u32 base_addr_hi,
+			            u32 base_addr_lo,
+			            u32 size,
+			            u32 features);
+int gt64260_pci_snoop_set_window(u32 pci_bus,
+			         u32 window,
+			         u32 base_addr_hi,
+			         u32 base_addr_lo,
+			         u32 size,
+			         u32 snoop_type);
+int gt64260_set_base(u32 new_base);
+int gt64260_get_base(u32 *base);
+int gt64260_pci_exclude_device(u8 bus, u8 devfn);
+
+void gt64260_init_irq(void);
+int gt64260_get_irq(struct pt_regs *regs);
+
+void gt64260_mpsc_progress(char *s, unsigned short hex);
+
+#endif /* __ASMPPC_GT64260_H */
diff --git a/include/asm-ppc/gt64260_defs.h b/include/asm-ppc/gt64260_defs.h
new file mode 100644
index 000000000000..6ffd01a5373e
--- /dev/null
+++ b/include/asm-ppc/gt64260_defs.h
@@ -0,0 +1,1010 @@
+/*
+ * include/asm-ppc/gt64260_defs.h
+ *
+ * Register definitions for the Marvell/Galileo GT64260 host bridge.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_GT64260_DEFS_H
+#define __ASMPPC_GT64260_DEFS_H
+
+/*
+ * Define a macro to represent the supported version of the 64260.
+ */
+#define	GT64260			0x01
+#define	GT64260A		0x10
+
+/*
+ *****************************************************************************
+ *
+ *	CPU Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* CPU physical address of 64260's registers */
+#define GT64260_INTERNAL_SPACE_DECODE			0x0068
+#define GT64260_INTERNAL_SPACE_SIZE			0x10000
+#define GT64260_INTERNAL_SPACE_DEFAULT_ADDR		0x14000000
+
+/* CPU Memory Controller Window Registers (4 windows) */
+#define	GT64260_CPU_SCS_DECODE_WINDOWS			4
+
+#define	GT64260_CPU_SCS_DECODE_0_BOT			0x0008
+#define	GT64260_CPU_SCS_DECODE_0_TOP			0x0010
+#define	GT64260_CPU_SCS_DECODE_1_BOT			0x0208
+#define	GT64260_CPU_SCS_DECODE_1_TOP			0x0210
+#define	GT64260_CPU_SCS_DECODE_2_BOT			0x0018
+#define	GT64260_CPU_SCS_DECODE_2_TOP			0x0020
+#define	GT64260_CPU_SCS_DECODE_3_BOT			0x0218
+#define	GT64260_CPU_SCS_DECODE_3_TOP			0x0220
+
+/* CPU Device Controller Window Registers (4 windows) */
+#define	GT64260_CPU_CS_DECODE_WINDOWS			4
+
+#define	GT64260_CPU_CS_DECODE_0_BOT			0x0028
+#define	GT64260_CPU_CS_DECODE_0_TOP			0x0030
+#define	GT64260_CPU_CS_DECODE_1_BOT			0x0228
+#define	GT64260_CPU_CS_DECODE_1_TOP			0x0230
+#define	GT64260_CPU_CS_DECODE_2_BOT			0x0248
+#define	GT64260_CPU_CS_DECODE_2_TOP			0x0250
+#define	GT64260_CPU_CS_DECODE_3_BOT			0x0038
+#define	GT64260_CPU_CS_DECODE_3_TOP			0x0040
+
+#define	GT64260_CPU_BOOT_CS_DECODE_0_BOT		0x0238
+#define	GT64260_CPU_BOOT_CS_DECODE_0_TOP		0x0240
+
+/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
+#define	GT64260_PCI_BUSES				2
+#define	GT64260_PCI_IO_WINDOWS_PER_BUS			1
+#define	GT64260_PCI_MEM_WINDOWS_PER_BUS			4
+
+#define	GT64260_CPU_PCI_SWAP_BYTE			0x00000000
+#define	GT64260_CPU_PCI_SWAP_NONE			0x01000000
+#define	GT64260_CPU_PCI_SWAP_BYTE_WORD			0x02000000
+#define	GT64260_CPU_PCI_SWAP_WORD			0x03000000
+#define	GT64260_CPU_PCI_SWAP_MASK			0x07000000
+
+#define	GT64260_CPU_PCI_MEM_REQ64			(1<<27)
+
+#define	GT64260_CPU_PCI_0_IO_DECODE_BOT			0x0048
+#define	GT64260_CPU_PCI_0_IO_DECODE_TOP			0x0050
+#define	GT64260_CPU_PCI_0_MEM_0_DECODE_BOT		0x0058
+#define	GT64260_CPU_PCI_0_MEM_0_DECODE_TOP		0x0060
+#define	GT64260_CPU_PCI_0_MEM_1_DECODE_BOT		0x0080
+#define	GT64260_CPU_PCI_0_MEM_1_DECODE_TOP		0x0088
+#define	GT64260_CPU_PCI_0_MEM_2_DECODE_BOT		0x0258
+#define	GT64260_CPU_PCI_0_MEM_2_DECODE_TOP		0x0260
+#define	GT64260_CPU_PCI_0_MEM_3_DECODE_BOT		0x0280
+#define	GT64260_CPU_PCI_0_MEM_3_DECODE_TOP		0x0288
+
+#define	GT64260_CPU_PCI_0_IO_REMAP			0x00f0
+#define	GT64260_CPU_PCI_0_MEM_0_REMAP_LO		0x00f8
+#define	GT64260_CPU_PCI_0_MEM_0_REMAP_HI		0x0320
+#define	GT64260_CPU_PCI_0_MEM_1_REMAP_LO		0x0100
+#define	GT64260_CPU_PCI_0_MEM_1_REMAP_HI		0x0328
+#define	GT64260_CPU_PCI_0_MEM_2_REMAP_LO		0x02f8
+#define	GT64260_CPU_PCI_0_MEM_2_REMAP_HI		0x0330
+#define	GT64260_CPU_PCI_0_MEM_3_REMAP_LO		0x0300
+#define	GT64260_CPU_PCI_0_MEM_3_REMAP_HI		0x0338
+
+#define	GT64260_CPU_PCI_1_IO_DECODE_BOT			0x0090
+#define	GT64260_CPU_PCI_1_IO_DECODE_TOP			0x0098
+#define	GT64260_CPU_PCI_1_MEM_0_DECODE_BOT		0x00a0
+#define	GT64260_CPU_PCI_1_MEM_0_DECODE_TOP		0x00a8
+#define	GT64260_CPU_PCI_1_MEM_1_DECODE_BOT		0x00b0
+#define	GT64260_CPU_PCI_1_MEM_1_DECODE_TOP		0x00b8
+#define	GT64260_CPU_PCI_1_MEM_2_DECODE_BOT		0x02a0
+#define	GT64260_CPU_PCI_1_MEM_2_DECODE_TOP		0x02a8
+#define	GT64260_CPU_PCI_1_MEM_3_DECODE_BOT		0x02b0
+#define	GT64260_CPU_PCI_1_MEM_3_DECODE_TOP		0x02b8
+
+#define	GT64260_CPU_PCI_1_IO_REMAP			0x0108
+#define	GT64260_CPU_PCI_1_MEM_0_REMAP_LO		0x0110
+#define	GT64260_CPU_PCI_1_MEM_0_REMAP_HI		0x0340
+#define	GT64260_CPU_PCI_1_MEM_1_REMAP_LO		0x0118
+#define	GT64260_CPU_PCI_1_MEM_1_REMAP_HI		0x0348
+#define	GT64260_CPU_PCI_1_MEM_2_REMAP_LO		0x0310
+#define	GT64260_CPU_PCI_1_MEM_2_REMAP_HI		0x0350
+#define	GT64260_CPU_PCI_1_MEM_3_REMAP_LO		0x0318
+#define	GT64260_CPU_PCI_1_MEM_3_REMAP_HI		0x0358
+
+/* CPU Control Registers */
+#define GT64260_CPU_CONFIG				0x0000
+#define GT64260_CPU_MODE				0x0120
+#define GT64260_CPU_MASTER_CNTL				0x0160
+#define GT64260_CPU_XBAR_CNTL_LO			0x0150
+#define GT64260_CPU_XBAR_CNTL_HI			0x0158
+#define GT64260_CPU_XBAR_TO				0x0168
+#define GT64260_CPU_RR_XBAR_CNTL_LO			0x0170
+#define GT64260_CPU_RR_XBAR_CNTL_HI			0x0178
+
+/* CPU Sync Barrier Registers */
+#define GT64260_CPU_SYNC_BARRIER_PCI_0			0x00c0
+#define GT64260_CPU_SYNC_BARRIER_PCI_1			0x00c8
+
+/* CPU Access Protection Registers */
+#define	GT64260_CPU_PROT_WINDOWS			8
+
+#define	GT64260_CPU_PROT_ACCPROTECT			(1<<16)
+#define	GT64260_CPU_PROT_WRPROTECT			(1<<17)
+#define	GT64260_CPU_PROT_CACHEPROTECT			(1<<18)
+
+#define GT64260_CPU_PROT_BASE_0				0x0180
+#define GT64260_CPU_PROT_TOP_0				0x0188
+#define GT64260_CPU_PROT_BASE_1				0x0190
+#define GT64260_CPU_PROT_TOP_1				0x0198
+#define GT64260_CPU_PROT_BASE_2				0x01a0
+#define GT64260_CPU_PROT_TOP_2				0x01a8
+#define GT64260_CPU_PROT_BASE_3				0x01b0
+#define GT64260_CPU_PROT_TOP_3				0x01b8
+#define GT64260_CPU_PROT_BASE_4				0x01c0
+#define GT64260_CPU_PROT_TOP_4				0x01c8
+#define GT64260_CPU_PROT_BASE_5				0x01d0
+#define GT64260_CPU_PROT_TOP_5				0x01d8
+#define GT64260_CPU_PROT_BASE_6				0x01e0
+#define GT64260_CPU_PROT_TOP_6				0x01e8
+#define GT64260_CPU_PROT_BASE_7				0x01f0
+#define GT64260_CPU_PROT_TOP_7				0x01f8
+
+/* CPU Snoop Control Registers */
+#define	GT64260_CPU_SNOOP_WINDOWS			4
+
+#define	GT64260_CPU_SNOOP_NONE				0x00000000
+#define	GT64260_CPU_SNOOP_WT				0x00010000
+#define	GT64260_CPU_SNOOP_WB				0x00020000
+#define	GT64260_CPU_SNOOP_MASK				0x00030000
+#define	GT64260_CPU_SNOOP_ALL_BITS			GT64260_CPU_SNOOP_MASK
+
+#define GT64260_CPU_SNOOP_BASE_0			0x0380
+#define GT64260_CPU_SNOOP_TOP_0				0x0388
+#define GT64260_CPU_SNOOP_BASE_1			0x0390
+#define GT64260_CPU_SNOOP_TOP_1				0x0398
+#define GT64260_CPU_SNOOP_BASE_2			0x03a0
+#define GT64260_CPU_SNOOP_TOP_2				0x03a8
+#define GT64260_CPU_SNOOP_BASE_3			0x03b0
+#define GT64260_CPU_SNOOP_TOP_3				0x03b8
+
+/* CPU Error Report Registers */
+#define GT64260_CPU_ERR_ADDR_LO				0x0070
+#define GT64260_CPU_ERR_ADDR_HI				0x0078
+#define GT64260_CPU_ERR_DATA_LO				0x0128
+#define GT64260_CPU_ERR_DATA_HI				0x0130
+#define GT64260_CPU_ERR_PARITY				0x0138
+#define GT64260_CPU_ERR_CAUSE				0x0140
+#define GT64260_CPU_ERR_MASK				0x0148
+
+
+/*
+ *****************************************************************************
+ *
+ *	SDRAM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* SDRAM Config Registers */
+#define	GT64260_SDRAM_CONFIG				0x0448
+#define	GT64260_SDRAM_OPERATION_MODE			0x0474
+#define	GT64260_SDRAM_ADDR_CNTL				0x047c
+#define	GT64260_SDRAM_TIMING_PARAMS			0x04b4
+#define	GT64260_SDRAM_UMA_CNTL				0x04a4
+#define	GT64260_SDRAM_XBAR_CNTL_LO			0x04a8
+#define	GT64260_SDRAM_XBAR_CNTL_HI			0x04ac
+#define	GT64260_SDRAM_XBAR_CNTL_TO			0x04b0
+
+/* SDRAM Banks Parameters Registers */
+#define	GT64260_SDRAM_BANK_PARAMS_0			0x044c
+#define	GT64260_SDRAM_BANK_PARAMS_1			0x0450
+#define	GT64260_SDRAM_BANK_PARAMS_2			0x0454
+#define	GT64260_SDRAM_BANK_PARAMS_3			0x0458
+
+/* SDRAM Error Report Registers */
+#define	GT64260_SDRAM_ERR_DATA_LO			0x0484
+#define	GT64260_SDRAM_ERR_DATA_HI			0x0480
+#define	GT64260_SDRAM_ERR_ADDR				0x0490
+#define	GT64260_SDRAM_ERR_ECC_RCVD			0x0488
+#define	GT64260_SDRAM_ERR_ECC_CALC			0x048c
+#define	GT64260_SDRAM_ERR_ECC_CNTL			0x0494
+#define	GT64260_SDRAM_ERR_ECC_ERR_CNT			0x0498
+
+
+/*
+ *****************************************************************************
+ *
+ *	Device/BOOT Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* Device Control Registers */
+#define	GT64260_DEV_BANK_PARAMS_0			0x045c
+#define	GT64260_DEV_BANK_PARAMS_1			0x0460
+#define	GT64260_DEV_BANK_PARAMS_2			0x0464
+#define	GT64260_DEV_BANK_PARAMS_3			0x0468
+#define	GT64260_DEV_BOOT_PARAMS				0x046c
+#define	GT64260_DEV_IF_CNTL				0x04c0
+#define	GT64260_DEV_IF_XBAR_CNTL_LO			0x04c8
+#define	GT64260_DEV_IF_XBAR_CNTL_HI			0x04cc
+#define	GT64260_DEV_IF_XBAR_CNTL_TO			0x04c4
+
+/* Device Interrupt Registers */
+#define	GT64260_DEV_INTR_CAUSE				0x04d0
+#define	GT64260_DEV_INTR_MASK				0x04d4
+#define	GT64260_DEV_INTR_ERR_ADDR			0x04d8
+
+
+/*
+ *****************************************************************************
+ *
+ *	PCI Bridge Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* PCI Configuration Access Registers */
+#define	GT64260_PCI_0_CONFIG_ADDR			0x0cf8
+#define	GT64260_PCI_0_CONFIG_DATA			0x0cfc
+#define	GT64260_PCI_0_IACK				0x0c34
+
+#define	GT64260_PCI_1_CONFIG_ADDR			0x0c78
+#define	GT64260_PCI_1_CONFIG_DATA			0x0c7c
+#define	GT64260_PCI_1_IACK				0x0cb4
+
+/* PCI Control Registers */
+#define	GT64260_PCI_0_CMD				0x0c00
+#define	GT64260_PCI_0_MODE				0x0d00
+#define	GT64260_PCI_0_TO_RETRY				0x0c04
+#define	GT64260_PCI_0_RD_BUF_DISCARD_TIMER		0x0d04
+#define	GT64260_PCI_0_MSI_TRIGGER_TIMER			0x0c38
+#define	GT64260_PCI_0_ARBITER_CNTL			0x1d00
+#define	GT64260_PCI_0_XBAR_CNTL_LO			0x1d08
+#define	GT64260_PCI_0_XBAR_CNTL_HI			0x1d0c
+#define	GT64260_PCI_0_XBAR_CNTL_TO			0x1d04
+#define	GT64260_PCI_0_RD_RESP_XBAR_CNTL_LO		0x1d18
+#define	GT64260_PCI_0_RD_RESP_XBAR_CNTL_HI		0x1d1c
+#define	GT64260_PCI_0_SYNC_BARRIER			0x1d10
+#define	GT64260_PCI_0_P2P_CONFIG			0x1d14
+#define	GT64260_PCI_0_P2P_SWAP_CNTL			0x1d54
+
+#define	GT64260_PCI_1_CMD				0x0c80
+#define	GT64260_PCI_1_MODE				0x0d80
+#define	GT64260_PCI_1_TO_RETRY				0x0c84
+#define	GT64260_PCI_1_RD_BUF_DISCARD_TIMER		0x0d84
+#define	GT64260_PCI_1_MSI_TRIGGER_TIMER			0x0cb8
+#define	GT64260_PCI_1_ARBITER_CNTL			0x1d80
+#define	GT64260_PCI_1_XBAR_CNTL_LO			0x1d88
+#define	GT64260_PCI_1_XBAR_CNTL_HI			0x1d8c
+#define	GT64260_PCI_1_XBAR_CNTL_TO			0x1d84
+#define	GT64260_PCI_1_RD_RESP_XBAR_CNTL_LO		0x1d98
+#define	GT64260_PCI_1_RD_RESP_XBAR_CNTL_HI		0x1d9c
+#define	GT64260_PCI_1_SYNC_BARRIER			0x1d90
+#define	GT64260_PCI_1_P2P_CONFIG			0x1d94
+#define	GT64260_PCI_1_P2P_SWAP_CNTL			0x1dd4
+
+/* PCI Access Control Regions Registers */
+#define	GT64260_PCI_ACC_CNTL_WINDOWS			8
+
+#define	GT64260_PCI_ACC_CNTL_PREFETCHEN			(1<<12)
+#define	GT64260_PCI_ACC_CNTL_DREADEN			(1<<13)
+#define	GT64260_PCI_ACC_CNTL_RDPREFETCH			(1<<16)
+#define	GT64260_PCI_ACC_CNTL_RDLINEPREFETCH		(1<<17)
+#define	GT64260_PCI_ACC_CNTL_RDMULPREFETCH		(1<<18)
+#define	GT64260_PCI_ACC_CNTL_MBURST_4_WORDS		0x00000000
+#define	GT64260_PCI_ACC_CNTL_MBURST_8_WORDS		0x00100000
+#define	GT64260_PCI_ACC_CNTL_MBURST_16_WORDS		0x00200000
+#define	GT64260_PCI_ACC_CNTL_MBURST_MASK		0x00300000
+#define	GT64260_PCI_ACC_CNTL_SWAP_BYTE			0x00000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_NONE			0x01000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD		0x02000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_WORD			0x03000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_MASK			0x03000000
+#define	GT64260_PCI_ACC_CNTL_ACCPROT			(1<<28)
+#define	GT64260_PCI_ACC_CNTL_WRPROT			(1<<29)
+
+#define	GT64260_PCI_ACC_CNTL_ALL_BITS	(GT64260_PCI_ACC_CNTL_PREFETCHEN |    \
+					 GT64260_PCI_ACC_CNTL_DREADEN |       \
+					 GT64260_PCI_ACC_CNTL_RDPREFETCH |    \
+					 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
+					 GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
+					 GT64260_PCI_ACC_CNTL_MBURST_MASK |   \
+					 GT64260_PCI_ACC_CNTL_SWAP_MASK |     \
+					 GT64260_PCI_ACC_CNTL_ACCPROT|        \
+					 GT64260_PCI_ACC_CNTL_WRPROT)
+
+#define	GT64260_PCI_0_ACC_CNTL_0_BASE_LO		0x1e00
+#define	GT64260_PCI_0_ACC_CNTL_0_BASE_HI		0x1e04
+#define	GT64260_PCI_0_ACC_CNTL_0_TOP			0x1e08
+#define	GT64260_PCI_0_ACC_CNTL_1_BASE_LO		0x1e10
+#define	GT64260_PCI_0_ACC_CNTL_1_BASE_HI		0x1e14
+#define	GT64260_PCI_0_ACC_CNTL_1_TOP			0x1e18
+#define	GT64260_PCI_0_ACC_CNTL_2_BASE_LO		0x1e20
+#define	GT64260_PCI_0_ACC_CNTL_2_BASE_HI		0x1e24
+#define	GT64260_PCI_0_ACC_CNTL_2_TOP			0x1e28
+#define	GT64260_PCI_0_ACC_CNTL_3_BASE_LO		0x1e30
+#define	GT64260_PCI_0_ACC_CNTL_3_BASE_HI		0x1e34
+#define	GT64260_PCI_0_ACC_CNTL_3_TOP			0x1e38
+#define	GT64260_PCI_0_ACC_CNTL_4_BASE_LO		0x1e40
+#define	GT64260_PCI_0_ACC_CNTL_4_BASE_HI		0x1e44
+#define	GT64260_PCI_0_ACC_CNTL_4_TOP			0x1e48
+#define	GT64260_PCI_0_ACC_CNTL_5_BASE_LO		0x1e50
+#define	GT64260_PCI_0_ACC_CNTL_5_BASE_HI		0x1e54
+#define	GT64260_PCI_0_ACC_CNTL_5_TOP			0x1e58
+#define	GT64260_PCI_0_ACC_CNTL_6_BASE_LO		0x1e60
+#define	GT64260_PCI_0_ACC_CNTL_6_BASE_HI		0x1e64
+#define	GT64260_PCI_0_ACC_CNTL_6_TOP			0x1e68
+#define	GT64260_PCI_0_ACC_CNTL_7_BASE_LO		0x1e70
+#define	GT64260_PCI_0_ACC_CNTL_7_BASE_HI		0x1e74
+#define	GT64260_PCI_0_ACC_CNTL_7_TOP			0x1e78
+
+#define	GT64260_PCI_1_ACC_CNTL_0_BASE_LO		0x1e80
+#define	GT64260_PCI_1_ACC_CNTL_0_BASE_HI		0x1e84
+#define	GT64260_PCI_1_ACC_CNTL_0_TOP			0x1e88
+#define	GT64260_PCI_1_ACC_CNTL_1_BASE_LO		0x1e90
+#define	GT64260_PCI_1_ACC_CNTL_1_BASE_HI		0x1e94
+#define	GT64260_PCI_1_ACC_CNTL_1_TOP			0x1e98
+#define	GT64260_PCI_1_ACC_CNTL_2_BASE_LO		0x1ea0
+#define	GT64260_PCI_1_ACC_CNTL_2_BASE_HI		0x1ea4
+#define	GT64260_PCI_1_ACC_CNTL_2_TOP			0x1ea8
+#define	GT64260_PCI_1_ACC_CNTL_3_BASE_LO		0x1eb0
+#define	GT64260_PCI_1_ACC_CNTL_3_BASE_HI		0x1eb4
+#define	GT64260_PCI_1_ACC_CNTL_3_TOP			0x1eb8
+#define	GT64260_PCI_1_ACC_CNTL_4_BASE_LO		0x1ec0
+#define	GT64260_PCI_1_ACC_CNTL_4_BASE_HI		0x1ec4
+#define	GT64260_PCI_1_ACC_CNTL_4_TOP			0x1ec8
+#define	GT64260_PCI_1_ACC_CNTL_5_BASE_LO		0x1ed0
+#define	GT64260_PCI_1_ACC_CNTL_5_BASE_HI		0x1ed4
+#define	GT64260_PCI_1_ACC_CNTL_5_TOP			0x1ed8
+#define	GT64260_PCI_1_ACC_CNTL_6_BASE_LO		0x1ee0
+#define	GT64260_PCI_1_ACC_CNTL_6_BASE_HI		0x1ee4
+#define	GT64260_PCI_1_ACC_CNTL_6_TOP			0x1ee8
+#define	GT64260_PCI_1_ACC_CNTL_7_BASE_LO		0x1ef0
+#define	GT64260_PCI_1_ACC_CNTL_7_BASE_HI		0x1ef4
+#define	GT64260_PCI_1_ACC_CNTL_7_TOP			0x1ef8
+
+/* PCI Snoop Control Registers */
+#define	GT64260_PCI_SNOOP_WINDOWS			4
+
+#define	GT64260_PCI_SNOOP_NONE				0x00000000
+#define	GT64260_PCI_SNOOP_WT				0x00001000
+#define	GT64260_PCI_SNOOP_WB				0x00002000
+
+#define	GT64260_PCI_0_SNOOP_0_BASE_LO			0x1f00
+#define	GT64260_PCI_0_SNOOP_0_BASE_HI			0x1f04
+#define	GT64260_PCI_0_SNOOP_0_TOP			0x1f08
+#define	GT64260_PCI_0_SNOOP_1_BASE_LO			0x1f10
+#define	GT64260_PCI_0_SNOOP_1_BASE_HI			0x1f14
+#define	GT64260_PCI_0_SNOOP_1_TOP			0x1f18
+#define	GT64260_PCI_0_SNOOP_2_BASE_LO			0x1f20
+#define	GT64260_PCI_0_SNOOP_2_BASE_HI			0x1f24
+#define	GT64260_PCI_0_SNOOP_2_TOP			0x1f28
+#define	GT64260_PCI_0_SNOOP_3_BASE_LO			0x1f30
+#define	GT64260_PCI_0_SNOOP_3_BASE_HI			0x1f34
+#define	GT64260_PCI_0_SNOOP_3_TOP			0x1f38
+
+#define	GT64260_PCI_1_SNOOP_0_BASE_LO			0x1f80
+#define	GT64260_PCI_1_SNOOP_0_BASE_HI			0x1f84
+#define	GT64260_PCI_1_SNOOP_0_TOP			0x1f88
+#define	GT64260_PCI_1_SNOOP_1_BASE_LO			0x1f90
+#define	GT64260_PCI_1_SNOOP_1_BASE_HI			0x1f94
+#define	GT64260_PCI_1_SNOOP_1_TOP			0x1f98
+#define	GT64260_PCI_1_SNOOP_2_BASE_LO			0x1fa0
+#define	GT64260_PCI_1_SNOOP_2_BASE_HI			0x1fa4
+#define	GT64260_PCI_1_SNOOP_2_TOP			0x1fa8
+#define	GT64260_PCI_1_SNOOP_3_BASE_LO			0x1fb0
+#define	GT64260_PCI_1_SNOOP_3_BASE_HI			0x1fb4
+#define	GT64260_PCI_1_SNOOP_3_TOP			0x1fb8
+
+/* PCI Error Report Registers */
+#define GT64260_PCI_0_ERR_SERR_MASK			0x0c28
+#define GT64260_PCI_0_ERR_ADDR_LO			0x1d40
+#define GT64260_PCI_0_ERR_ADDR_HI			0x1d44
+#define GT64260_PCI_0_ERR_DATA_LO			0x1d48
+#define GT64260_PCI_0_ERR_DATA_HI			0x1d4c
+#define GT64260_PCI_0_ERR_CMD				0x1d50
+#define GT64260_PCI_0_ERR_CAUSE				0x1d58
+#define GT64260_PCI_0_ERR_MASK				0x1d5c
+
+#define GT64260_PCI_1_ERR_SERR_MASK			0x0ca8
+#define GT64260_PCI_1_ERR_ADDR_LO			0x1dc0
+#define GT64260_PCI_1_ERR_ADDR_HI			0x1dc4
+#define GT64260_PCI_1_ERR_DATA_LO			0x1dc8
+#define GT64260_PCI_1_ERR_DATA_HI			0x1dcc
+#define GT64260_PCI_1_ERR_CMD				0x1dd0
+#define GT64260_PCI_1_ERR_CAUSE				0x1dd8
+#define GT64260_PCI_1_ERR_MASK				0x1ddc
+
+/* PCI Slave Address Decoding Registers */
+#define	GT64260_PCI_SCS_WINDOWS				4
+#define	GT64260_PCI_CS_WINDOWS				4
+#define	GT64260_PCI_BOOT_WINDOWS			1
+#define	GT64260_PCI_P2P_MEM_WINDOWS			2
+#define	GT64260_PCI_P2P_IO_WINDOWS			1
+#define	GT64260_PCI_DAC_SCS_WINDOWS			4
+#define	GT64260_PCI_DAC_CS_WINDOWS			4
+#define	GT64260_PCI_DAC_BOOT_WINDOWS			1
+#define	GT64260_PCI_DAC_P2P_MEM_WINDOWS			2
+
+#define	GT64260_PCI_0_SLAVE_SCS_0_SIZE			0x0c08
+#define	GT64260_PCI_0_SLAVE_SCS_1_SIZE			0x0d08
+#define	GT64260_PCI_0_SLAVE_SCS_2_SIZE			0x0c0c
+#define	GT64260_PCI_0_SLAVE_SCS_3_SIZE			0x0d0c
+#define	GT64260_PCI_0_SLAVE_CS_0_SIZE			0x0c10
+#define	GT64260_PCI_0_SLAVE_CS_1_SIZE			0x0d10
+#define	GT64260_PCI_0_SLAVE_CS_2_SIZE			0x0d18
+#define	GT64260_PCI_0_SLAVE_CS_3_SIZE			0x0c14
+#define	GT64260_PCI_0_SLAVE_BOOT_SIZE			0x0d14
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_0_SIZE		0x0d1c
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_1_SIZE		0x0d20
+#define	GT64260_PCI_0_SLAVE_P2P_IO_SIZE			0x0d24
+#define	GT64260_PCI_0_SLAVE_CPU_SIZE			0x0d28
+
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_0_SIZE		0x0e00
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_1_SIZE		0x0e04
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_2_SIZE		0x0e08
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_3_SIZE		0x0e0c
+#define	GT64260_PCI_0_SLAVE_DAC_CS_0_SIZE		0x0e10
+#define	GT64260_PCI_0_SLAVE_DAC_CS_1_SIZE		0x0e14
+#define	GT64260_PCI_0_SLAVE_DAC_CS_2_SIZE		0x0e18
+#define	GT64260_PCI_0_SLAVE_DAC_CS_3_SIZE		0x0e1c
+#define	GT64260_PCI_0_SLAVE_DAC_BOOT_SIZE		0x0e20
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_SIZE		0x0e24
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_SIZE		0x0e28
+#define	GT64260_PCI_0_SLAVE_DAC_CPU_SIZE		0x0e2c
+
+#define	GT64260_PCI_0_SLAVE_EXP_ROM_SIZE		0x0d2c
+
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_0		(1<<0)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_1		(1<<1)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_2		(1<<2)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_3		(1<<3)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_0		(1<<4)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_1		(1<<5)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_2		(1<<6)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_3		(1<<7)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_BOOT		(1<<8)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_MEM	(1<<9)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_IO	(1<<10)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_0	(1<<11)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_1	(1<<12)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_IO	(1<<13)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_CPU		(1<<14)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_0	(1<<15)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_1	(1<<16)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_2	(1<<17)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_3	(1<<18)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_0	(1<<19)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_1	(1<<20)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_2	(1<<21)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_3	(1<<22)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_BOOT	(1<<23)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_0	(1<<24)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_1	(1<<25)
+#define	GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CPU	(1<<26)
+
+#define	GT64260_PCI_0_SLAVE_BAR_REG_ENABLES		0x0c3c
+#define	GT64260_PCI_0_SLAVE_SCS_0_REMAP			0x0c48
+#define	GT64260_PCI_0_SLAVE_SCS_1_REMAP			0x0d48
+#define	GT64260_PCI_0_SLAVE_SCS_2_REMAP			0x0c4c
+#define	GT64260_PCI_0_SLAVE_SCS_3_REMAP			0x0d4c
+#define	GT64260_PCI_0_SLAVE_CS_0_REMAP			0x0c50
+#define	GT64260_PCI_0_SLAVE_CS_1_REMAP			0x0d50
+#define	GT64260_PCI_0_SLAVE_CS_2_REMAP			0x0d58
+#define	GT64260_PCI_0_SLAVE_CS_3_REMAP			0x0c54
+#define	GT64260_PCI_0_SLAVE_BOOT_REMAP			0x0d54
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_LO		0x0d5c
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_HI		0x0d60
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_LO		0x0d64
+#define	GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_HI		0x0d68
+#define	GT64260_PCI_0_SLAVE_P2P_IO_REMAP		0x0d6c
+#define	GT64260_PCI_0_SLAVE_CPU_REMAP			0x0d70
+
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_0_REMAP		0x0f00
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_1_REMAP		0x0f04
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_2_REMAP		0x0f08
+#define	GT64260_PCI_0_SLAVE_DAC_SCS_3_REMAP		0x0f0c
+#define	GT64260_PCI_0_SLAVE_DAC_CS_0_REMAP		0x0f10
+#define	GT64260_PCI_0_SLAVE_DAC_CS_1_REMAP		0x0f14
+#define	GT64260_PCI_0_SLAVE_DAC_CS_2_REMAP		0x0f18
+#define	GT64260_PCI_0_SLAVE_DAC_CS_3_REMAP		0x0f1c
+#define	GT64260_PCI_0_SLAVE_DAC_BOOT_REMAP		0x0f20
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_LO	0x0f24
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_HI	0x0f28
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_LO	0x0f2c
+#define	GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_HI	0x0f30
+#define	GT64260_PCI_0_SLAVE_DAC_CPU_REMAP		0x0f34
+
+#define	GT64260_PCI_0_SLAVE_EXP_ROM_REMAP		0x0f38
+#define	GT64260_PCI_0_SLAVE_PCI_DECODE_CNTL		0x0d3c
+
+#define	GT64260_PCI_1_SLAVE_SCS_0_SIZE			0x0c88
+#define	GT64260_PCI_1_SLAVE_SCS_1_SIZE			0x0d88
+#define	GT64260_PCI_1_SLAVE_SCS_2_SIZE			0x0c8c
+#define	GT64260_PCI_1_SLAVE_SCS_3_SIZE			0x0d8c
+#define	GT64260_PCI_1_SLAVE_CS_0_SIZE			0x0c90
+#define	GT64260_PCI_1_SLAVE_CS_1_SIZE			0x0d90
+#define	GT64260_PCI_1_SLAVE_CS_2_SIZE			0x0d98
+#define	GT64260_PCI_1_SLAVE_CS_3_SIZE			0x0c94
+#define	GT64260_PCI_1_SLAVE_BOOT_SIZE			0x0d94
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_0_SIZE		0x0d9c
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_1_SIZE		0x0da0
+#define	GT64260_PCI_1_SLAVE_P2P_IO_SIZE			0x0da4
+#define	GT64260_PCI_1_SLAVE_CPU_SIZE			0x0da8
+
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_0_SIZE		0x0e80
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_1_SIZE		0x0e84
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_2_SIZE		0x0e88
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_3_SIZE		0x0e8c
+#define	GT64260_PCI_1_SLAVE_DAC_CS_0_SIZE		0x0e90
+#define	GT64260_PCI_1_SLAVE_DAC_CS_1_SIZE		0x0e94
+#define	GT64260_PCI_1_SLAVE_DAC_CS_2_SIZE		0x0e98
+#define	GT64260_PCI_1_SLAVE_DAC_CS_3_SIZE		0x0e9c
+#define	GT64260_PCI_1_SLAVE_DAC_BOOT_SIZE		0x0ea0
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_SIZE		0x0ea4
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_SIZE		0x0ea8
+#define	GT64260_PCI_1_SLAVE_DAC_CPU_SIZE		0x0eac
+
+#define	GT64260_PCI_1_SLAVE_EXP_ROM_SIZE		0x0dac
+
+#define	GT64260_PCI_1_SLAVE_BAR_REG_ENABLES		0x0cbc
+#define	GT64260_PCI_1_SLAVE_SCS_0_REMAP			0x0cc8
+#define	GT64260_PCI_1_SLAVE_SCS_1_REMAP			0x0dc8
+#define	GT64260_PCI_1_SLAVE_SCS_2_REMAP			0x0ccc
+#define	GT64260_PCI_1_SLAVE_SCS_3_REMAP			0x0dcc
+#define	GT64260_PCI_1_SLAVE_CS_0_REMAP			0x0cd0
+#define	GT64260_PCI_1_SLAVE_CS_1_REMAP			0x0dd0
+#define	GT64260_PCI_1_SLAVE_CS_2_REMAP			0x0dd8
+#define	GT64260_PCI_1_SLAVE_CS_3_REMAP			0x0cd4
+#define	GT64260_PCI_1_SLAVE_BOOT_REMAP			0x0dd4
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_LO		0x0ddc
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_HI		0x0de0
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_LO		0x0de4
+#define	GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_HI		0x0de8
+#define	GT64260_PCI_1_SLAVE_P2P_IO_REMAP		0x0dec
+#define	GT64260_PCI_1_SLAVE_CPU_REMAP			0x0df0
+
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_0_REMAP		0x0f80
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_1_REMAP		0x0f84
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_2_REMAP		0x0f88
+#define	GT64260_PCI_1_SLAVE_DAC_SCS_3_REMAP		0x0f8c
+#define	GT64260_PCI_1_SLAVE_DAC_CS_0_REMAP		0x0f90
+#define	GT64260_PCI_1_SLAVE_DAC_CS_1_REMAP		0x0f94
+#define	GT64260_PCI_1_SLAVE_DAC_CS_2_REMAP		0x0f98
+#define	GT64260_PCI_1_SLAVE_DAC_CS_3_REMAP		0x0f9c
+#define	GT64260_PCI_1_SLAVE_DAC_BOOT_REMAP		0x0fa0
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_LO	0x0fa4
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_HI	0x0fa8
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_LO	0x0fac
+#define	GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_HI	0x0fb0
+#define	GT64260_PCI_1_SLAVE_DAC_CPU_REMAP		0x0fb4
+
+#define	GT64260_PCI_1_SLAVE_EXP_ROM_REMAP		0x0fb8
+#define	GT64260_PCI_1_SLAVE_PCI_DECODE_CNTL		0x0dbc
+
+
+/*
+ *****************************************************************************
+ *
+ *	I2O Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+
+/*
+ *****************************************************************************
+ *
+ *	DMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ *	Timer/Counter Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ *	Communications Controller (Enet, Serial, etc.) Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_ENET_0_CNTL_LO				0xf200
+#define	GT64260_ENET_0_CNTL_HI				0xf204
+#define	GT64260_ENET_0_RX_BUF_PCI_ADDR_HI		0xf208
+#define	GT64260_ENET_0_TX_BUF_PCI_ADDR_HI		0xf20c
+#define	GT64260_ENET_0_RX_DESC_ADDR_HI			0xf210
+#define	GT64260_ENET_0_TX_DESC_ADDR_HI			0xf214
+#define	GT64260_ENET_0_HASH_TAB_PCI_ADDR_HI		0xf218
+#define	GT64260_ENET_1_CNTL_LO				0xf220
+#define	GT64260_ENET_1_CNTL_HI				0xf224
+#define	GT64260_ENET_1_RX_BUF_PCI_ADDR_HI		0xf228
+#define	GT64260_ENET_1_TX_BUF_PCI_ADDR_HI		0xf22c
+#define	GT64260_ENET_1_RX_DESC_ADDR_HI			0xf230
+#define	GT64260_ENET_1_TX_DESC_ADDR_HI			0xf234
+#define	GT64260_ENET_1_HASH_TAB_PCI_ADDR_HI		0xf238
+#define	GT64260_ENET_2_CNTL_LO				0xf240
+#define	GT64260_ENET_2_CNTL_HI				0xf244
+#define	GT64260_ENET_2_RX_BUF_PCI_ADDR_HI		0xf248
+#define	GT64260_ENET_2_TX_BUF_PCI_ADDR_HI		0xf24c
+#define	GT64260_ENET_2_RX_DESC_ADDR_HI			0xf250
+#define	GT64260_ENET_2_TX_DESC_ADDR_HI			0xf254
+#define	GT64260_ENET_2_HASH_TAB_PCI_ADDR_HI		0xf258
+
+#define	GT64260_MPSC_0_CNTL_LO				0xf280
+#define	GT64260_MPSC_0_CNTL_HI				0xf284
+#define	GT64260_MPSC_0_RX_BUF_PCI_ADDR_HI		0xf288
+#define	GT64260_MPSC_0_TX_BUF_PCI_ADDR_HI		0xf28c
+#define	GT64260_MPSC_0_RX_DESC_ADDR_HI			0xf290
+#define	GT64260_MPSC_0_TX_DESC_ADDR_HI			0xf294
+#define	GT64260_MPSC_1_CNTL_LO				0xf2c0
+#define	GT64260_MPSC_1_CNTL_HI				0xf2c4
+#define	GT64260_MPSC_1_RX_BUF_PCI_ADDR_HI		0xf2c8
+#define	GT64260_MPSC_1_TX_BUF_PCI_ADDR_HI		0xf2cc
+#define	GT64260_MPSC_1_RX_DESC_ADDR_HI			0xf2d0
+#define	GT64260_MPSC_1_TX_DESC_ADDR_HI			0xf2d4
+
+#define	GT64260_SER_INIT_PCI_ADDR_HI			0xf320
+#define	GT64260_SER_INIT_LAST_DATA			0xf324
+#define	GT64260_SER_INIT_CONTROL			0xf328
+#define	GT64260_SER_INIT_STATUS				0xf32c
+
+#define	GT64260_COMM_ARBITER_CNTL			0xf300
+#define	GT64260_COMM_CONFIG				0xb40c
+#define	GT64260_COMM_XBAR_TO				0xf304
+#define	GT64260_COMM_INTR_CAUSE				0xf310
+#define	GT64260_COMM_INTR_MASK				0xf314
+#define	GT64260_COMM_ERR_ADDR				0xf318
+
+
+/*
+ *****************************************************************************
+ *
+ *	Fast Ethernet Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_ENET_PHY_ADDR				0x2000
+#define	GT64260_ENET_ESMIR				0x2010
+
+#define	GT64260_ENET_E0PCR				0x2400
+#define	GT64260_ENET_E0PCXR				0x2408
+#define	GT64260_ENET_E0PCMR				0x2410
+#define	GT64260_ENET_E0PSR				0x2418
+#define	GT64260_ENET_E0SPR				0x2420
+#define	GT64260_ENET_E0HTPR				0x2428
+#define	GT64260_ENET_E0FCSAL				0x2430
+#define	GT64260_ENET_E0FCSAH				0x2438
+#define	GT64260_ENET_E0SDCR				0x2440
+#define	GT64260_ENET_E0SDCMR				0x2448
+#define	GT64260_ENET_E0ICR				0x2450
+#define	GT64260_ENET_E0IMR				0x2458
+#define	GT64260_ENET_E0FRDP0				0x2480
+#define	GT64260_ENET_E0FRDP1				0x2484
+#define	GT64260_ENET_E0FRDP2				0x2488
+#define	GT64260_ENET_E0FRDP3				0x248c
+#define	GT64260_ENET_E0CRDP0				0x24a0
+#define	GT64260_ENET_E0CRDP1				0x24a4
+#define	GT64260_ENET_E0CRDP2				0x24a8
+#define	GT64260_ENET_E0CRDP3				0x24ac
+#define	GT64260_ENET_E0CTDP0				0x24e0
+#define	GT64260_ENET_E0CTDP1				0x24e4
+#define	GT64260_ENET_0_DSCP2P0L				0x2460
+#define	GT64260_ENET_0_DSCP2P0H				0x2464
+#define	GT64260_ENET_0_DSCP2P1L				0x2468
+#define	GT64260_ENET_0_DSCP2P1H				0x246c
+#define	GT64260_ENET_0_VPT2P				0x2470
+#define	GT64260_ENET_0_MIB_CTRS				0x2500
+
+#define	GT64260_ENET_E1PCR				0x2800
+#define	GT64260_ENET_E1PCXR				0x2808
+#define	GT64260_ENET_E1PCMR				0x2810
+#define	GT64260_ENET_E1PSR				0x2818
+#define	GT64260_ENET_E1SPR				0x2820
+#define	GT64260_ENET_E1HTPR				0x2828
+#define	GT64260_ENET_E1FCSAL				0x2830
+#define	GT64260_ENET_E1FCSAH				0x2838
+#define	GT64260_ENET_E1SDCR				0x2840
+#define	GT64260_ENET_E1SDCMR				0x2848
+#define	GT64260_ENET_E1ICR				0x2850
+#define	GT64260_ENET_E1IMR				0x2858
+#define	GT64260_ENET_E1FRDP0				0x2880
+#define	GT64260_ENET_E1FRDP1				0x2884
+#define	GT64260_ENET_E1FRDP2				0x2888
+#define	GT64260_ENET_E1FRDP3				0x288c
+#define	GT64260_ENET_E1CRDP0				0x28a0
+#define	GT64260_ENET_E1CRDP1				0x28a4
+#define	GT64260_ENET_E1CRDP2				0x28a8
+#define	GT64260_ENET_E1CRDP3				0x28ac
+#define	GT64260_ENET_E1CTDP0				0x28e0
+#define	GT64260_ENET_E1CTDP1				0x28e4
+#define	GT64260_ENET_1_DSCP2P0L				0x2860
+#define	GT64260_ENET_1_DSCP2P0H				0x2864
+#define	GT64260_ENET_1_DSCP2P1L				0x2868
+#define	GT64260_ENET_1_DSCP2P1H				0x286c
+#define	GT64260_ENET_1_VPT2P				0x2870
+#define	GT64260_ENET_1_MIB_CTRS				0x2900
+
+#define	GT64260_ENET_E2PCR				0x2c00
+#define	GT64260_ENET_E2PCXR				0x2c08
+#define	GT64260_ENET_E2PCMR				0x2c10
+#define	GT64260_ENET_E2PSR				0x2c18
+#define	GT64260_ENET_E2SPR				0x2c20
+#define	GT64260_ENET_E2HTPR				0x2c28
+#define	GT64260_ENET_E2FCSAL				0x2c30
+#define	GT64260_ENET_E2FCSAH				0x2c38
+#define	GT64260_ENET_E2SDCR				0x2c40
+#define	GT64260_ENET_E2SDCMR				0x2c48
+#define	GT64260_ENET_E2ICR				0x2c50
+#define	GT64260_ENET_E2IMR				0x2c58
+#define	GT64260_ENET_E2FRDP0				0x2c80
+#define	GT64260_ENET_E2FRDP1				0x2c84
+#define	GT64260_ENET_E2FRDP2				0x2c88
+#define	GT64260_ENET_E2FRDP3				0x2c8c
+#define	GT64260_ENET_E2CRDP0				0x2ca0
+#define	GT64260_ENET_E2CRDP1				0x2ca4
+#define	GT64260_ENET_E2CRDP2				0x2ca8
+#define	GT64260_ENET_E2CRDP3				0x2cac
+#define	GT64260_ENET_E2CTDP0				0x2ce0
+#define	GT64260_ENET_E2CTDP1				0x2ce4
+#define	GT64260_ENET_2_DSCP2P0L				0x2c60
+#define	GT64260_ENET_2_DSCP2P0H				0x2c64
+#define	GT64260_ENET_2_DSCP2P1L				0x2c68
+#define	GT64260_ENET_2_DSCP2P1H				0x2c6c
+#define	GT64260_ENET_2_VPT2P				0x2c70
+#define	GT64260_ENET_2_MIB_CTRS				0x2d00
+
+
+/*
+ *****************************************************************************
+ *
+ *	Multi-Protocol Serial Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* Signal Routing */
+#define	GT64260_MPSC_MRR				0xb400
+#define	GT64260_MPSC_RCRR				0xb404
+#define	GT64260_MPSC_TCRR				0xb408
+
+/* Main Configuratino Registers */
+#define	GT64260_MPSC_0_MMCRL				0x8000
+#define	GT64260_MPSC_0_MMCRH				0x8004
+#define	GT64260_MPSC_0_MPCR				0x8008
+#define	GT64260_MPSC_0_CHR_1				0x800c
+#define	GT64260_MPSC_0_CHR_2				0x8010
+#define	GT64260_MPSC_0_CHR_3				0x8014
+#define	GT64260_MPSC_0_CHR_4				0x8018
+#define	GT64260_MPSC_0_CHR_5				0x801c
+#define	GT64260_MPSC_0_CHR_6				0x8020
+#define	GT64260_MPSC_0_CHR_7				0x8024
+#define	GT64260_MPSC_0_CHR_8				0x8028
+#define	GT64260_MPSC_0_CHR_9				0x802c
+#define	GT64260_MPSC_0_CHR_10				0x8030
+#define	GT64260_MPSC_0_CHR_11				0x8034
+
+#define	GT64260_MPSC_1_MMCRL				0x9000
+#define	GT64260_MPSC_1_MMCRH				0x9004
+#define	GT64260_MPSC_1_MPCR				0x9008
+#define	GT64260_MPSC_1_CHR_1				0x900c
+#define	GT64260_MPSC_1_CHR_2				0x9010
+#define	GT64260_MPSC_1_CHR_3				0x9014
+#define	GT64260_MPSC_1_CHR_4				0x9018
+#define	GT64260_MPSC_1_CHR_5				0x901c
+#define	GT64260_MPSC_1_CHR_6				0x9020
+#define	GT64260_MPSC_1_CHR_7				0x9024
+#define	GT64260_MPSC_1_CHR_8				0x9028
+#define	GT64260_MPSC_1_CHR_9				0x902c
+#define	GT64260_MPSC_1_CHR_10				0x9030
+#define	GT64260_MPSC_1_CHR_11				0x9034
+
+#define	GT64260_MPSC_0_INTR_CAUSE			0xb804
+#define	GT64260_MPSC_0_INTR_MASK			0xb884
+#define	GT64260_MPSC_1_INTR_CAUSE			0xb80c
+#define	GT64260_MPSC_1_INTR_MASK			0xb88c
+
+#define	GT64260_MPSC_UART_CR_TEV			(1<<1)
+#define	GT64260_MPSC_UART_CR_TA				(1<<7)
+#define	GT64260_MPSC_UART_CR_TTCS			(1<<9)
+#define	GT64260_MPSC_UART_CR_REV			(1<<17)
+#define	GT64260_MPSC_UART_CR_RA				(1<<23)
+#define	GT64260_MPSC_UART_CR_CRD			(1<<25)
+#define	GT64260_MPSC_UART_CR_EH				(1<<31)
+
+#define	GT64260_MPSC_UART_ESR_CTS			(1<<0)
+#define	GT64260_MPSC_UART_ESR_CD			(1<<1)
+#define	GT64260_MPSC_UART_ESR_TIDLE			(1<<3)
+#define	GT64260_MPSC_UART_ESR_RHS			(1<<5)
+#define	GT64260_MPSC_UART_ESR_RLS			(1<<7)
+#define	GT64260_MPSC_UART_ESR_RLIDL			(1<<11)
+
+
+/*
+ *****************************************************************************
+ *
+ *	Serial DMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_SDMA_0_SDC				0x4000
+#define	GT64260_SDMA_0_SDCM				0x4008
+#define	GT64260_SDMA_0_RX_DESC				0x4800
+#define	GT64260_SDMA_0_RX_BUF_PTR			0x4808
+#define	GT64260_SDMA_0_SCRDP				0x4810
+#define	GT64260_SDMA_0_TX_DESC				0x4c00
+#define	GT64260_SDMA_0_SCTDP				0x4c10
+#define	GT64260_SDMA_0_SFTDP				0x4c14
+
+#define	GT64260_SDMA_1_SDC				0x6000
+#define	GT64260_SDMA_1_SDCM				0x6008
+#define	GT64260_SDMA_1_RX_DESC				0x6800
+#define GT64260_SDMA_1_RX_BUF_PTR                       0x6808
+#define	GT64260_SDMA_1_SCRDP				0x6810
+#define	GT64260_SDMA_1_TX_DESC				0x6c00
+#define	GT64260_SDMA_1_SCTDP				0x6c10
+#define	GT64260_SDMA_1_SFTDP				0x6c14
+
+#define	GT64260_SDMA_INTR_CAUSE				0xb800
+#define	GT64260_SDMA_INTR_MASK				0xb880
+
+#define	GT64260_SDMA_DESC_CMDSTAT_PE			(1<<0)
+#define	GT64260_SDMA_DESC_CMDSTAT_CDL			(1<<1)
+#define	GT64260_SDMA_DESC_CMDSTAT_FR			(1<<3)
+#define	GT64260_SDMA_DESC_CMDSTAT_OR			(1<<6)
+#define	GT64260_SDMA_DESC_CMDSTAT_BR			(1<<9)
+#define	GT64260_SDMA_DESC_CMDSTAT_MI			(1<<10)
+#define	GT64260_SDMA_DESC_CMDSTAT_A			(1<<11)
+#define	GT64260_SDMA_DESC_CMDSTAT_AM			(1<<12)
+#define	GT64260_SDMA_DESC_CMDSTAT_CT			(1<<13)
+#define	GT64260_SDMA_DESC_CMDSTAT_C			(1<<14)
+#define	GT64260_SDMA_DESC_CMDSTAT_ES			(1<<15)
+#define	GT64260_SDMA_DESC_CMDSTAT_L			(1<<16)
+#define	GT64260_SDMA_DESC_CMDSTAT_F			(1<<17)
+#define	GT64260_SDMA_DESC_CMDSTAT_P			(1<<18)
+#define	GT64260_SDMA_DESC_CMDSTAT_EI			(1<<23)
+#define	GT64260_SDMA_DESC_CMDSTAT_O			(1<<31)
+
+#define	GT64260_SDMA_SDC_RFT				(1<<0)
+#define	GT64260_SDMA_SDC_SFM				(1<<1)
+#define	GT64260_SDMA_SDC_BLMR				(1<<6)
+#define	GT64260_SDMA_SDC_BLMT				(1<<7)
+#define	GT64260_SDMA_SDC_POVR				(1<<8)
+#define	GT64260_SDMA_SDC_RIFB				(1<<9)
+
+#define	GT64260_SDMA_SDCM_ERD				(1<<7)
+#define	GT64260_SDMA_SDCM_AR				(1<<15)
+#define	GT64260_SDMA_SDCM_STD				(1<<16)
+#define	GT64260_SDMA_SDCM_TXD				(1<<23)
+#define	GT64260_SDMA_SDCM_AT				(1<<31)
+
+#define	GT64260_SDMA_0_CAUSE_RXBUF			(1<<0)
+#define	GT64260_SDMA_0_CAUSE_RXERR			(1<<1)
+#define	GT64260_SDMA_0_CAUSE_TXBUF			(1<<2)
+#define	GT64260_SDMA_0_CAUSE_TXEND			(1<<3)
+#define	GT64260_SDMA_1_CAUSE_RXBUF			(1<<8)
+#define	GT64260_SDMA_1_CAUSE_RXERR			(1<<9)
+#define	GT64260_SDMA_1_CAUSE_TXBUF			(1<<10)
+#define	GT64260_SDMA_1_CAUSE_TXEND			(1<<11)
+
+
+/*
+ *****************************************************************************
+ *
+ *	Baud Rate Generator Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_BRG_0_BCR				0xb200
+#define	GT64260_BRG_0_BTR				0xb204
+#define	GT64260_BRG_1_BCR				0xb208
+#define	GT64260_BRG_1_BTR				0xb20c
+#define	GT64260_BRG_2_BCR				0xb210
+#define	GT64260_BRG_2_BTR				0xb214
+
+#define	GT64260_BRG_INTR_CAUSE				0xb834
+#define	GT64260_BRG_INTR_MASK				0xb8b4
+
+
+/*
+ *****************************************************************************
+ *
+ *	Watchdog Timer Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_WDT_WDC					0xb410
+#define	GT64260_WDT_WDV					0xb414
+
+
+/*
+ *****************************************************************************
+ *
+ *	 General Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_GPP_IO_CNTL				0xf100
+#define	GT64260_GPP_LEVEL_CNTL				0xf110
+#define	GT64260_GPP_VALUE				0xf104
+#define	GT64260_GPP_INTR_CAUSE				0xf108
+#define	GT64260_GPP_INTR_MASK				0xf10c
+
+
+/*
+ *****************************************************************************
+ *
+ *	Multi-Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_MPP_CNTL_0				0xf000
+#define	GT64260_MPP_CNTL_1				0xf004
+#define	GT64260_MPP_CNTL_2				0xf008
+#define	GT64260_MPP_CNTL_3				0xf00c
+#define	GT64260_MPP_SERIAL_PORTS_MULTIPLEX		0xf010
+
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ *	Interrupt Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_IC_MAIN_CAUSE_LO			0x0c18
+#define	GT64260_IC_MAIN_CAUSE_HI			0x0c68
+#define	GT64260_IC_CPU_INTR_MASK_LO			0x0c1c
+#define	GT64260_IC_CPU_INTR_MASK_HI			0x0c6c
+#define	GT64260_IC_CPU_SELECT_CAUSE			0x0c70
+#define	GT64260_IC_PCI_0_INTR_MASK_LO			0x0c24
+#define	GT64260_IC_PCI_0_INTR_MASK_HI			0x0c64
+#define	GT64260_IC_PCI_0_SELECT_CAUSE			0x0c74
+#define	GT64260_IC_PCI_1_INTR_MASK_LO			0x0ca4
+#define	GT64260_IC_PCI_1_INTR_MASK_HI			0x0ce4
+#define	GT64260_IC_PCI_1_SELECT_CAUSE			0x0cf4
+#define	GT64260_IC_CPU_INT_0_MASK			0x0e60
+#define	GT64260_IC_CPU_INT_1_MASK			0x0e64
+#define	GT64260_IC_CPU_INT_2_MASK			0x0e68
+#define	GT64260_IC_CPU_INT_3_MASK			0x0e6c
+
+
+#endif /* __ASMPPC_GT64260_DEFS_H */
diff --git a/include/asm-ppc/hardirq.h b/include/asm-ppc/hardirq.h
new file mode 100644
index 000000000000..94f1411b1a93
--- /dev/null
+++ b/include/asm-ppc/hardirq.h
@@ -0,0 +1,31 @@
+#ifdef __KERNEL__
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/smp_lock.h>
+#include <asm/irq.h>
+
+/* The __last_jiffy_stamp field is needed to ensure that no decrementer
+ * interrupt is lost on SMP machines. Since on most CPUs it is in the same
+ * cache line as local_irq_count, it is cheap to access and is also used on UP
+ * for uniformity.
+ */
+typedef struct {
+	unsigned long __softirq_pending;	/* set_bit is used on this */
+	unsigned int __last_jiffy_stamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "illegal vector %d received!\n", irq);
+	BUG();
+}
+
+#endif /* __ASM_HARDIRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/harrier.h b/include/asm-ppc/harrier.h
new file mode 100644
index 000000000000..36c73ab7e43e
--- /dev/null
+++ b/include/asm-ppc/harrier.h
@@ -0,0 +1,45 @@
+/*
+ * arch/ppc/kernel/harrier.h
+ *
+ * Definitions for Motorola MCG Harrier North Bridge & Memory controller
+ *
+ * Author: Dale Farnsworth
+ *         dale.farnsworth@mvista.com
+ *
+ * Modified by: Randy Vinson
+ * 	   rvinson@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASMPPC_HARRIER_H
+#define __ASMPPC_HARRIER_H
+
+#include <linux/types.h>
+#include <asm/pci-bridge.h>
+
+struct pci_controller;
+int harrier_init(struct pci_controller *hose,
+		 uint ppc_reg_base,
+		 ulong processor_pci_mem_start,
+		 ulong processor_pci_mem_end,
+		 ulong processor_pci_io_start,
+		 ulong processor_pci_io_end,
+		 ulong processor_mpic_base);
+
+unsigned long harrier_get_mem_size(uint smc_base);
+
+int harrier_mpic_init(unsigned int pci_mem_offset);
+
+void harrier_setup_nonmonarch(uint ppc_reg_base,
+			      uint in0_size);
+void harrier_release_eready(uint ppc_reg_base);
+
+void harrier_wait_eready(uint ppc_reg_base);
+
+#endif /* __ASMPPC_HARRIER_H */
diff --git a/include/asm-ppc/hawk.h b/include/asm-ppc/hawk.h
new file mode 100644
index 000000000000..f347007d22af
--- /dev/null
+++ b/include/asm-ppc/hawk.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-ppc/hawk.h
+ *
+ * Support functions for MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
+ * 2001,2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASMPPC_HAWK_H
+#define __ASMPPC_HAWK_H
+
+#include <asm/pci-bridge.h>
+#include <asm/hawk_defs.h>
+
+extern int hawk_init(struct pci_controller *hose,
+	      unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
+	      unsigned long processor_pci_mem_end,
+	      unsigned long processor_pci_io_start,
+	      unsigned long processor_pci_io_end,
+	      unsigned long processor_mpic_base);
+extern unsigned long hawk_get_mem_size(unsigned int smc_base);
+extern int hawk_mpic_init(unsigned int pci_mem_offset);
+
+#endif	/* __ASMPPC_HAWK_H */
diff --git a/include/asm-ppc/hawk_defs.h b/include/asm-ppc/hawk_defs.h
new file mode 100644
index 000000000000..6d1d2baf648c
--- /dev/null
+++ b/include/asm-ppc/hawk_defs.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-ppc/hawk_defs.h
+ *
+ * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASMPPC_HAWK_DEFS_H
+#define __ASMPPC_HAWK_DEFS_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The Falcon/Raven and HAWK have 4 sets of registers:
+ *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
+ *      etc.
+ *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
+ *      MPIC base address.
+ *   3) MPIC registers
+ *   4) System Memory Controller (SMC) registers.
+ */
+
+#define HAWK_PCI_CONFIG_ADDR_OFF	0x00000cf8
+#define HAWK_PCI_CONFIG_DATA_OFF	0x00000cfc
+
+#define HAWK_MPIC_SIZE			0x00040000U
+#define HAWK_SMC_SIZE			0x00001000U
+
+/*
+ * Define PPC register offsets.
+ */
+#define HAWK_PPC_XSADD0_OFF			0x40
+#define HAWK_PPC_XSOFF0_OFF			0x44
+#define HAWK_PPC_XSADD1_OFF			0x48
+#define HAWK_PPC_XSOFF1_OFF			0x4c
+#define HAWK_PPC_XSADD2_OFF			0x50
+#define HAWK_PPC_XSOFF2_OFF			0x54
+#define HAWK_PPC_XSADD3_OFF			0x58
+#define HAWK_PPC_XSOFF3_OFF			0x5c
+
+/*
+ * Define PCI register offsets.
+ */
+#define HAWK_PCI_PSADD0_OFF			0x80
+#define HAWK_PCI_PSOFF0_OFF			0x84
+#define HAWK_PCI_PSADD1_OFF			0x88
+#define HAWK_PCI_PSOFF1_OFF			0x8c
+#define HAWK_PCI_PSADD2_OFF			0x90
+#define HAWK_PCI_PSOFF2_OFF			0x94
+#define HAWK_PCI_PSADD3_OFF			0x98
+#define HAWK_PCI_PSOFF3_OFF			0x9c
+
+/*
+ * Define the System Memory Controller (SMC) register offsets.
+ */
+#define HAWK_SMC_RAM_A_SIZE_REG_OFF		0x10
+#define HAWK_SMC_RAM_B_SIZE_REG_OFF		0x11
+#define HAWK_SMC_RAM_C_SIZE_REG_OFF		0x12
+#define HAWK_SMC_RAM_D_SIZE_REG_OFF		0x13
+#define HAWK_SMC_RAM_E_SIZE_REG_OFF		0xc0	/* HAWK Only */
+#define HAWK_SMC_RAM_F_SIZE_REG_OFF		0xc1	/* HAWK Only */
+#define HAWK_SMC_RAM_G_SIZE_REG_OFF		0xc2	/* HAWK Only */
+#define HAWK_SMC_RAM_H_SIZE_REG_OFF		0xc3	/* HAWK Only */
+
+#define FALCON_SMC_REG_COUNT			4
+#define HAWK_SMC_REG_COUNT			8
+#endif				/* __ASMPPC_HAWK_DEFS_H */
diff --git a/include/asm-ppc/hdreg.h b/include/asm-ppc/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-ppc/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h
new file mode 100644
index 000000000000..22ac179856b9
--- /dev/null
+++ b/include/asm-ppc/heathrow.h
@@ -0,0 +1,62 @@
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT		0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL	0x32
+#define HEATHROW_CONTRAST_CNTL		0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR			0x34	/* Media bay control */
+#define HEATHROW_FCR			0x38	/* Feature control */
+#define HEATHROW_AUX_CNTL_REG		0x3c	/* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N	0x00000001	/* Also controls modem power */
+#define HRW_BAY_POWER_N		0x00000002
+#define HRW_BAY_PCI_ENABLE	0x00000004
+#define HRW_BAY_IDE_ENABLE	0x00000008
+#define HRW_BAY_FLOPPY_ENABLE	0x00000010
+#define HRW_IDE0_ENABLE		0x00000020
+#define HRW_IDE0_RESET_N	0x00000040
+#define HRW_BAY_DEV_MASK	0x0000001c
+#define HRW_BAY_RESET_N		0x00000080
+#define HRW_IOBUS_ENABLE	0x00000100	/* Internal IDE ? */
+#define HRW_SCC_ENABLE		0x00000200
+#define HRW_MESH_ENABLE		0x00000400
+#define HRW_SWIM_ENABLE		0x00000800
+#define HRW_SOUND_POWER_N	0x00001000
+#define HRW_SOUND_CLK_ENABLE	0x00002000
+#define HRW_SCCA_IO		0x00004000
+#define HRW_SCCB_IO		0x00008000
+#define HRW_PORT_OR_DESK_VIA_N	0x00010000	/* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N	0x00020000	/* ??? (0) */
+#define HRW_HOOK_MB_CNT_N	0x00040000	/* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY	0x00080000	/* ??? (0) */
+#define HRW_AUD_RUN22		0x00100000	/* ??? (1) */
+#define HRW_SCSI_LINK_MODE	0x00200000	/* Read ??? (1) */
+#define HRW_ARB_BYPASS		0x00400000	/* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N	0x00800000	/* Media bay */
+#define HRW_SLOW_SCC_PCLK	0x01000000	/* ??? (0) */
+#define HRW_RESET_SCC		0x02000000
+#define HRW_MFDC_CELL_ENABLE	0x04000000	/* ??? (0) */
+#define HRW_USE_MFDC		0x08000000	/* ??? (0) */
+#define HRW_BMAC_IO_ENABLE	0x60000000	/* two bits, not documented in OF */
+#define HRW_BMAC_RESET		0x80000000	/* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS		(HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET	0x6d
+
diff --git a/include/asm-ppc/highmem.h b/include/asm-ppc/highmem.h
new file mode 100644
index 000000000000..1d2c4ef81c22
--- /dev/null
+++ b/include/asm-ppc/highmem.h
@@ -0,0 +1,137 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE 	CONFIG_HIGHMEM_START
+#define LAST_PKMAP 	(1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define KMAP_FIX_BEGIN	(PKMAP_BASE + 0x00400000UL)
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	inc_preempt_count();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
+#ifdef HIGHMEM_DEBUG
+	BUG_ON(!pte_none(*(kmap_pte+idx)));
+#endif
+	set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot));
+	flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef HIGHMEM_DEBUG
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < KMAP_FIX_BEGIN) { // FIXME
+		dec_preempt_count();
+		preempt_check_resched();
+		return;
+	}
+
+	BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE);
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte+idx);
+	flush_tlb_page(NULL, vaddr);
+#endif
+	dec_preempt_count();
+	preempt_check_resched();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+	unsigned long idx, vaddr = (unsigned long) ptr;
+
+	if (vaddr < KMAP_FIX_BEGIN)
+		return virt_to_page(ptr);
+
+	idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT;
+	return pte_page(kmap_pte[idx]);
+}
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-ppc/hw_irq.h b/include/asm-ppc/hw_irq.h
new file mode 100644
index 000000000000..47dc7990fb26
--- /dev/null
+++ b/include/asm-ppc/hw_irq.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_HW_IRQ_H
+#define _PPC_HW_IRQ_H
+
+#include <asm/ptrace.h>
+#include <asm/reg.h>
+
+extern void timer_interrupt(struct pt_regs *);
+
+#define INLINE_IRQS
+
+#define irqs_disabled()	((mfmsr() & MSR_EE) == 0)
+
+#ifdef INLINE_IRQS
+
+static inline void local_irq_disable(void)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	mtmsr(msr & ~MSR_EE);
+	__asm__ __volatile__("": : :"memory");
+}
+
+static inline void local_irq_enable(void)
+{
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	mtmsr(msr | MSR_EE);
+}
+
+static inline void local_irq_save_ptr(unsigned long *flags)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	*flags = msr;
+	mtmsr(msr & ~MSR_EE);
+	__asm__ __volatile__("": : :"memory");
+}
+
+#define local_save_flags(flags)		((flags) = mfmsr())
+#define local_irq_save(flags)		local_irq_save_ptr(&flags)
+#define local_irq_restore(flags)	mtmsr(flags)
+
+#else
+
+extern void local_irq_enable(void);
+extern void local_irq_disable(void);
+extern void local_irq_restore(unsigned long);
+extern void local_save_flags_ptr(unsigned long *);
+
+#define local_save_flags(flags) local_save_flags_ptr(&flags)
+#define local_irq_save(flags) ({local_save_flags(flags);local_irq_disable();})
+
+#endif
+
+extern void do_lost_interrupts(unsigned long);
+
+#define mask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->disable) irq_desc[irq].handler->disable(irq);})
+#define unmask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->enable) irq_desc[irq].handler->enable(irq);})
+#define ack_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->ack) irq_desc[irq].handler->ack(irq);})
+
+/* Should we handle this via lost interrupts and IPIs or should we don't care like
+ * we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+
+
+#endif /* _PPC_HW_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/hydra.h b/include/asm-ppc/hydra.h
new file mode 100644
index 000000000000..1134431431da
--- /dev/null
+++ b/include/asm-ppc/hydra.h
@@ -0,0 +1,102 @@
+/*
+ *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	Macintosh Technology in the Common Hardware Reference Platform
+ *	Apple Computer, Inc.
+ *
+ *	© Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ *  It's available online from http://chrp.apple.com/MacTech.pdf.
+ *  You can obtain paper copies of this book from computer bookstores or by
+ *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+    /* DBDMA Controller Register Space */
+    char Pad1[0x30];
+    u_int CachePD;
+    u_int IDs;
+    u_int Feature_Control;
+    char Pad2[0x7fc4];
+    /* DBDMA Channel Register Space */
+    char SCSI_DMA[0x100];
+    char Pad3[0x300];
+    char SCCA_Tx_DMA[0x100];
+    char SCCA_Rx_DMA[0x100];
+    char SCCB_Tx_DMA[0x100];
+    char SCCB_Rx_DMA[0x100];
+    char Pad4[0x7800];
+    /* Device Register Space */
+    char SCSI[0x1000];
+    char ADB[0x1000];
+    char SCC_Legacy[0x1000];
+    char SCC[0x1000];
+    char Pad9[0x2000];
+    char VIA[0x2000];
+    char Pad10[0x28000];
+    char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra *Hydra;
+
+
+    /*
+     *  Feature Control Register
+     */
+
+#define HYDRA_FC_SCC_CELL_EN	0x00000001	/* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN	0x00000002	/* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE	0x00000004	/* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE	0x00000008	/* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS	0x00000010	/* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC	0x00000020	/* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE	0x00000040	/* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK	0x00000080	/* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER	0x00000100	/* OpenPIC Master Mode */
+
+
+    /*
+     *  OpenPIC Interrupt Sources
+     */
+
+#define HYDRA_INT_SIO		0
+#define HYDRA_INT_SCSI_DMA	1
+#define HYDRA_INT_SCCA_TX_DMA	2
+#define HYDRA_INT_SCCA_RX_DMA	3
+#define HYDRA_INT_SCCB_TX_DMA	4
+#define HYDRA_INT_SCCB_RX_DMA	5
+#define HYDRA_INT_SCSI		6
+#define HYDRA_INT_SCCA		7
+#define HYDRA_INT_SCCB		8
+#define HYDRA_INT_VIA		9
+#define HYDRA_INT_ADB		10
+#define HYDRA_INT_ADB_NMI	11
+#define HYDRA_INT_EXT1		12	/* PCI IRQW */
+#define HYDRA_INT_EXT2		13	/* PCI IRQX */
+#define HYDRA_INT_EXT3		14	/* PCI IRQY */
+#define HYDRA_INT_EXT4		15	/* PCI IRQZ */
+#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6		17	/* IDE Secondary */
+#define HYDRA_INT_EXT7		18	/* Power Off Request */
+#define HYDRA_INT_SPARE		19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-ppc/i8259.h b/include/asm-ppc/i8259.h
new file mode 100644
index 000000000000..091b71295de4
--- /dev/null
+++ b/include/asm-ppc/i8259.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_KERNEL_i8259_H
+#define _PPC_KERNEL_i8259_H
+
+#include <linux/irq.h>
+
+extern struct hw_interrupt_type i8259_pic;
+
+extern void i8259_init(long intack_addr);
+extern int i8259_irq(struct pt_regs *regs);
+
+#endif /* _PPC_KERNEL_i8259_H */
diff --git a/include/asm-ppc/ibm403.h b/include/asm-ppc/ibm403.h
new file mode 100644
index 000000000000..bf6efa0417ab
--- /dev/null
+++ b/include/asm-ppc/ibm403.h
@@ -0,0 +1,479 @@
+/*
+ * Authors: Armin Kuster <akuster@mvista.com> and Tom Rini <trini@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM403_H__
+#define __ASM_IBM403_H__
+
+#include <linux/config.h>
+
+#if defined(CONFIG_403GCX)
+
+#define	DCRN_BE_BASE		0x090
+#define	DCRN_DMA0_BASE		0x0C0
+#define	DCRN_DMA1_BASE		0x0C8
+#define	DCRN_DMA2_BASE		0x0D0
+#define	DCRN_DMA3_BASE		0x0D8
+#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
+#define	DCRN_DMASR_BASE		0x0E0
+
+#define	DCRN_EXIER_BASE		0x042
+#define	DCRN_EXISR_BASE		0x040
+#define	DCRN_IOCR_BASE		0x0A0
+
+
+/* ------------------------------------------------------------------------- */
+#endif
+
+
+
+#ifdef DCRN_BE_BASE
+#define	DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
+#define	DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register*/
+#endif
+/* DCRN_BESR */
+#define BESR_DSES	0x80000000	/* Data-Side Error Status */
+#define BESR_DMES	0x40000000	/* DMA Error Status */
+#define BESR_RWS	0x20000000	/* Read/Write Status */
+#define BESR_ETMASK	0x1C000000	/* Error Type */
+#define ET_PROT	0
+#define ET_PARITY	1
+#define ET_NCFG	2
+#define ET_BUSERR	4
+#define ET_BUSTO	6
+
+#ifdef DCRN_CHCR_BASE
+#define DCRN_CHCR0	(DCRN_CHCR_BASE + 0x0)	/* Chip Control Register 1 */
+#define DCRN_CHCR1	(DCRN_CHCR_BASE + 0x1)	/* Chip Control Register 2 */
+#endif
+#define CHR1_CETE	0x00800000		 /* CPU external timer enable */
+#define CHR1_PCIPW	0x00008000 /* PCI Int enable/Peripheral Write enable */
+
+#ifdef DCRN_CHPSR_BASE
+#define DCRN_CHPSR	(DCRN_CHPSR_BASE + 0x0)	/* Chip Pin Strapping */
+#endif
+
+#ifdef DCRN_CIC_BASE
+#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
+#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
+#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
+#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
+#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
+#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
+#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
+#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
+#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
+#endif
+
+#ifdef DCRN_CPMFR_BASE
+#define DCRN_CPMFR	(DCRN_CPMFR_BASE + 0x0)	/* CPM Force */
+#endif
+
+#ifndef CPM_AUD
+#define CPM_AUD		0x00000000
+#endif
+#ifndef CPM_BRG
+#define CPM_BRG		0x00000000
+#endif
+#ifndef CPM_CBS
+#define CPM_CBS		0x00000000
+#endif
+#ifndef CPM_CPU
+#define CPM_CPU		0x00000000
+#endif
+#ifndef CPM_DCP
+#define CPM_DCP		0x00000000
+#endif
+#ifndef CPM_DCRX
+#define CPM_DCRX	0x00000000
+#endif
+#ifndef CPM_DENC
+#define CPM_DENC	0x00000000
+#endif
+#ifndef CPM_DMA
+#define CPM_DMA		0x00000000
+#endif
+#ifndef CPM_DSCR
+#define CPM_DSCR	0x00000000
+#endif
+#ifndef CPM_EBC
+#define CPM_EBC		0x00000000
+#endif
+#ifndef CPM_EBIU
+#define CPM_EBIU	0x00000000
+#endif
+#ifndef CPM_EMAC_MM
+#define CPM_EMAC_MM	0x00000000
+#endif
+#ifndef CPM_EMAC_RM
+#define CPM_EMAC_RM	0x00000000
+#endif
+#ifndef CPM_EMAC_TM
+#define CPM_EMAC_TM	0x00000000
+#endif
+#ifndef CPM_GPIO0
+#define CPM_GPIO0	0x00000000
+#endif
+#ifndef CPM_GPT
+#define CPM_GPT		0x00000000
+#endif
+#ifndef CPM_I1284
+#define CPM_I1284	0x00000000
+#endif
+#ifndef CPM_IIC0
+#define CPM_IIC0	0x00000000
+#endif
+#ifndef CPM_IIC1
+#define CPM_IIC1	0x00000000
+#endif
+#ifndef CPM_MSI
+#define CPM_MSI		0x00000000
+#endif
+#ifndef CPM_PCI
+#define CPM_PCI		0x00000000
+#endif
+#ifndef CPM_PLB
+#define CPM_PLB		0x00000000
+#endif
+#ifndef CPM_SC0
+#define CPM_SC0		0x00000000
+#endif
+#ifndef CPM_SC1
+#define CPM_SC1		0x00000000
+#endif
+#ifndef CPM_SDRAM0
+#define CPM_SDRAM0	0x00000000
+#endif
+#ifndef CPM_SDRAM1
+#define CPM_SDRAM1	0x00000000
+#endif
+#ifndef CPM_TMRCLK
+#define CPM_TMRCLK	0x00000000
+#endif
+#ifndef CPM_UART0
+#define CPM_UART0	0x00000000
+#endif
+#ifndef CPM_UART1
+#define CPM_UART1	0x00000000
+#endif
+#ifndef CPM_UART2
+#define CPM_UART2	0x00000000
+#endif
+#ifndef CPM_UIC
+#define CPM_UIC		0x00000000
+#endif
+#ifndef CPM_VID2
+#define CPM_VID2	0x00000000
+#endif
+#ifndef CPM_XPT27
+#define CPM_XPT27	0x00000000
+#endif
+#ifndef CPM_XPT54
+#define CPM_XPT54	0x00000000
+#endif
+
+#ifdef DCRN_CPMSR_BASE
+#define DCRN_CPMSR	(DCRN_CPMSR_BASE + 0x0)	/* CPM Status */
+#define DCRN_CPMER	(DCRN_CPMSR_BASE + 0x1)	/* CPM Enable */
+#endif
+
+#ifdef DCRN_DCP0_BASE
+#define DCRN_DCP0_CFGADDR	(DCRN_DCP0_BASE + 0x0)	/* Decompression Controller Address */
+#define DCRN_DCP0_CFGDATA	(DCRN_DCP0_BASE + 0x1)	/* Decompression Controller Data */
+#endif
+
+#ifdef DCRN_DCRX_BASE
+#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
+#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
+#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
+#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
+#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
+#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
+#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
+#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
+#endif
+
+#ifdef DCRN_DMA0_BASE
+#define	DCRN_DMACR0	(DCRN_DMA0_BASE + 0x0)	/* DMA Channel Control Register 0 */
+#define	DCRN_DMACT0	(DCRN_DMA0_BASE + 0x1)	/* DMA Count Register 0 */
+#define	DCRN_DMADA0	(DCRN_DMA0_BASE + 0x2)	/* DMA Destination Address Register 0 */
+#define	DCRN_DMASA0	(DCRN_DMA0_BASE + 0x3)	/* DMA Source Address Register 0 */
+#ifdef DCRNCAP_DMA_CC
+#define	DCRN_DMACC0	(DCRN_DMA0_BASE + 0x4)	/* DMA Chained Count Register 0 */
+#endif
+
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG0	(DCRN_DMA0_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 0 */
+#endif
+#endif
+
+#ifdef DCRN_DMA1_BASE
+#define	DCRN_DMACR1	(DCRN_DMA1_BASE + 0x0)	/* DMA Channel Control Register 1 */
+#define	DCRN_DMACT1	(DCRN_DMA1_BASE + 0x1)	/* DMA Count Register 1 */
+#define	DCRN_DMADA1	(DCRN_DMA1_BASE + 0x2)	/* DMA Destination Address Register 1 */
+#define	DCRN_DMASA1	(DCRN_DMA1_BASE + 0x3)	/* DMA Source Address Register 1 */
+
+#ifdef DCRNCAP_DMA_CC
+#define	DCRN_DMACC1	(DCRN_DMA1_BASE + 0x4)	/* DMA Chained Count Register 1 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG1	(DCRN_DMA1_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 1 */
+#endif
+#endif
+
+#ifdef DCRN_DMA2_BASE
+#define	DCRN_DMACR2	(DCRN_DMA2_BASE + 0x0)	/* DMA Channel Control Register 2 */
+#define	DCRN_DMACT2	(DCRN_DMA2_BASE + 0x1)	/* DMA Count Register 2 */
+#define	DCRN_DMADA2	(DCRN_DMA2_BASE + 0x2)	/* DMA Destination Address Register 2 */
+#define	DCRN_DMASA2	(DCRN_DMA2_BASE + 0x3)	/* DMA Source Address Register 2 */
+#ifdef DCRNCAP_DMA_CC
+#define	DCRN_DMACC2	(DCRN_DMA2_BASE + 0x4)	/* DMA Chained Count Register 2 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG2	(DCRN_DMA2_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 2 */
+#endif
+#endif
+
+#ifdef DCRN_DMA3_BASE
+#define	DCRN_DMACR3	(DCRN_DMA3_BASE + 0x0)	/* DMA Channel Control Register 3 */
+#define	DCRN_DMACT3	(DCRN_DMA3_BASE + 0x1)	/* DMA Count Register 3 */
+#define	DCRN_DMADA3	(DCRN_DMA3_BASE + 0x2)	/* DMA Destination Address Register 3 */
+#define	DCRN_DMASA3	(DCRN_DMA3_BASE + 0x3)	/* DMA Source Address Register 3 */
+#ifdef DCRNCAP_DMA_CC
+#define	DCRN_DMACC3	(DCRN_DMA3_BASE + 0x4)	/* DMA Chained Count Register 3 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG3	(DCRN_DMA3_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 3 */
+#endif
+#endif
+
+#ifdef DCRN_DMASR_BASE
+#define	DCRN_DMASR	(DCRN_DMASR_BASE + 0x0)	/* DMA Status Register */
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASGC	(DCRN_DMASR_BASE + 0x3)	/* DMA Scatter/Gather Command */
+/* don't know if these two registers always exist if scatter/gather exists */
+#define DCRN_POL	(DCRN_DMASR_BASE + 0x6)	/* DMA Polarity Register */
+#define DCRN_SLP	(DCRN_DMASR_BASE + 0x5)	/* DMA Sleep Register */
+#endif
+#endif
+
+#ifdef DCRN_EBC_BASE
+#define DCRN_EBCCFGADR	(DCRN_EBC_BASE + 0x0)	/* Peripheral Controller Address */
+#define DCRN_EBCCFGDATA	(DCRN_EBC_BASE + 0x1)	/* Peripheral Controller Data */
+#endif
+
+#ifdef DCRN_EXIER_BASE
+#define	DCRN_EXIER	(DCRN_EXIER_BASE + 0x0)	/* External Interrupt Enable Register */
+#endif
+
+#ifdef DCRN_EBIMC_BASE
+#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
+#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
+#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
+#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
+#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
+#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
+#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
+#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
+#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)/* BRC 0 */
+#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)/* BRC 1 */
+#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)/* BRC 2 */
+#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)/* BRC 3 */
+#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)/* BRC 4 */
+#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)/* BRC 5 */
+#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)/* BRC 6 */
+#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)/* BRC 7 */
+#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)/* Bus Error Address Register */
+#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)/* Bus Error Status Register */
+#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)/* Bus Interfac Unit Ctrl Reg */
+#endif
+
+#ifdef DCRN_EXISR_BASE
+#define	DCRN_EXISR	(DCRN_EXISR_BASE + 0x0)	/* External Interrupt Status Register */
+#endif
+#define EXIER_CIE	0x80000000	/* Critical Interrupt Enable */
+#define EXIER_SRIE	0x08000000	/* Serial Port Rx Int. Enable */
+#define EXIER_STIE	0x04000000	/* Serial Port Tx Int. Enable */
+#define EXIER_JRIE	0x02000000	/* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE	0x01000000	/* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE	0x00800000	/* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE	0x00400000	/* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE	0x00200000	/* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE	0x00100000	/* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE	0x00000010	/* External Interrupt 0 Enable */
+#define EXIER_E1IE	0x00000008	/* External Interrupt 1 Enable */
+#define EXIER_E2IE	0x00000004	/* External Interrupt 2 Enable */
+#define EXIER_E3IE	0x00000002	/* External Interrupt 3 Enable */
+#define EXIER_E4IE	0x00000001	/* External Interrupt 4 Enable */
+
+#ifdef DCRN_IOCR_BASE
+#define	DCRN_IOCR	(DCRN_IOCR_BASE + 0x0)	/* Input/Output Configuration Register */
+#endif
+#define IOCR_E0TE	0x80000000
+#define IOCR_E0LP	0x40000000
+#define IOCR_E1TE	0x20000000
+#define IOCR_E1LP	0x10000000
+#define IOCR_E2TE	0x08000000
+#define IOCR_E2LP	0x04000000
+#define IOCR_E3TE	0x02000000
+#define IOCR_E3LP	0x01000000
+#define IOCR_E4TE	0x00800000
+#define IOCR_E4LP	0x00400000
+#define IOCR_EDT	0x00080000
+#define IOCR_SOR	0x00040000
+#define IOCR_EDO	0x00008000
+#define IOCR_2XC	0x00004000
+#define IOCR_ATC	0x00002000
+#define IOCR_SPD	0x00001000
+#define IOCR_BEM	0x00000800
+#define IOCR_PTD	0x00000400
+#define IOCR_ARE	0x00000080
+#define IOCR_DRC	0x00000020
+#define IOCR_RDM(x)	(((x) & 0x3) << 3)
+#define IOCR_TCS	0x00000004
+#define IOCR_SCS	0x00000002
+#define IOCR_SPC	0x00000001
+
+#ifdef DCRN_MAL_BASE
+#define DCRN_MALCR		(DCRN_MAL_BASE + 0x0) /* MAL Configuration */
+#define DCRN_MALDBR		(DCRN_MAL_BASE + 0x3) /* Debug Register */
+#define DCRN_MALESR		(DCRN_MAL_BASE + 0x1) /* Error Status */
+#define DCRN_MALIER		(DCRN_MAL_BASE + 0x2) /* Interrupt Enable */
+#define DCRN_MALTXCARR		(DCRN_MAL_BASE + 0x5) /* TX Channed Active Reset Register */
+#define DCRN_MALTXCASR		(DCRN_MAL_BASE + 0x4) /* TX Channel Active Set Register */
+#define DCRN_MALTXDEIR		(DCRN_MAL_BASE + 0x7) /* Tx Descriptor Error Interrupt */
+#define DCRN_MALTXEOBISR	(DCRN_MAL_BASE + 0x6) /* Tx End of Buffer Interrupt Status  */
+#define DCRN_MALRXCARR		(DCRN_MAL_BASE + 0x11) /* RX Channed Active Reset Register */
+#define DCRN_MALRXCASR		(DCRN_MAL_BASE + 0x10) /* RX Channel Active Set Register */
+#define DCRN_MALRXDEIR		(DCRN_MAL_BASE + 0x13) /* Rx Descriptor Error Interrupt */
+#define DCRN_MALRXEOBISR	(DCRN_MAL_BASE + 0x12) /* Rx End of Buffer Interrupt Status  */
+#define DCRN_MALRXCTP0R		(DCRN_MAL_BASE + 0x40) /* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP0R		(DCRN_MAL_BASE + 0x20) /* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R		(DCRN_MAL_BASE + 0x21) /* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALRCBS0		(DCRN_MAL_BASE + 0x60) /* Channel Rx 0 Channel Buffer Size */
+#endif
+/* DCRN_MALCR */
+#define MALCR_MMSR		0x80000000/* MAL Software reset */
+#define MALCR_PLBP_1		0x00400000 /* MAL reqest priority: */
+#define MALCR_PLBP_2		0x00800000 /* lowsest is 00 */
+#define MALCR_PLBP_3		0x00C00000 /* highest */
+#define MALCR_GA		0x00200000 /* Guarded Active Bit */
+#define MALCR_OA		0x00100000 /* Ordered Active Bit */
+#define MALCR_PLBLE		0x00080000 /* PLB Lock Error Bit */
+#define MALCR_PLBLT_1		0x00040000 /* PLB Latency Timer */
+#define MALCR_PLBLT_2		0x00020000
+#define MALCR_PLBLT_3		0x00010000
+#define MALCR_PLBLT_4		0x00008000
+#define MALCR_PLBLT_DEFAULT	0x00078000 /* JSP: Is this a valid default?? */
+#define MALCR_PLBB		0x00004000 /* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL		0x00000080 /* OPB Lock Bit */
+#define MALCR_EOPIE		0x00000004 /* End Of Packet Interrupt Enable */
+#define MALCR_LEA		0x00000002 /* Locked Error Active */
+#define MALCR_MSD		0x00000001 /* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB		0x80000000 /* Error Valid Bit */
+#define MALESR_CIDRX		0x40000000 /* Channel ID Receive */
+#define MALESR_DE		0x00100000 /* Descriptor Error */
+#define MALESR_OEN		0x00080000 /* OPB Non-Fullword Error */
+#define MALESR_OTE		0x00040000 /* OPB Timeout Error */
+#define MALESR_OSE		0x00020000 /* OPB Slave Error */
+#define MALESR_PEIN		0x00010000 /* PLB Bus Error Indication */
+#define MALESR_DEI		0x00000010 /* Descriptor Error Interrupt */
+#define MALESR_ONEI		0x00000008 /* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI		0x00000004 /* OPB Timeout Error Interrupt */
+#define MALESR_OSEI		0x00000002 /* OPB Slace Error Interrupt */
+#define MALESR_PBEI		0x00000001 /* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE		0x00000010 /* Descriptor Error Interrupt Enable */
+#define MALIER_NE		0x00000008 /* OPB Non-word Transfer Int Enable */
+#define MALIER_TE		0x00000004 /* OPB Time Out Error Interrupt Enable  */
+#define MALIER_OPBE		0x00000002 /* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE		0x00000001 /* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0		0x80000000 /* EOB channel 1 bit */
+#define MALOBISR_CH2		0x40000000 /* EOB channel 2 bit */
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC	(DCRN_OCM0_BASE + 0x0)	/* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR	(DCRN_OCM0_BASE + 0x1)	/* OCM Instr Side Control */
+#define DCRN_OCMDSARC	(DCRN_OCM0_BASE + 0x2)	/* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR	(DCRN_OCM0_BASE + 0x3)	/* OCM Data Side Control */
+#endif
+
+#ifdef DCRN_PLB0_BASE
+#define DCRN_PLB0_BESR	(DCRN_PLB0_BASE + 0x0)
+#define DCRN_PLB0_BEAR	(DCRN_PLB0_BASE + 0x2)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB0_ACR	(DCRN_PLB0_BASE + 0x3)
+#endif
+
+#ifdef DCRN_PLB1_BASE
+#define DCRN_PLB1_BESR	(DCRN_PLB1_BASE + 0x0)
+#define DCRN_PLB1_BEAR	(DCRN_PLB1_BASE + 0x1)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB1_ACR	(DCRN_PLB1_BASE + 0x2)
+#endif
+
+#ifdef DCRN_PLLMR_BASE
+#define DCRN_PLLMR	(DCRN_PLLMR_BASE + 0x0)	/* PL1 Mode */
+#endif
+
+#ifdef DCRN_POB0_BASE
+#define DCRN_POB0_BESR0	(DCRN_POB0_BASE + 0x0)
+#define DCRN_POB0_BEAR	(DCRN_POB0_BASE + 0x2)
+#define DCRN_POB0_BESR1	(DCRN_POB0_BASE + 0x4)
+#endif
+
+#ifdef DCRN_SCCR_BASE
+#define DCRN_SCCR	(DCRN_SCCR_BASE + 0x0)
+#endif
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR	(DCRN_SDRAM0_BASE + 0x0) /* Mem Ctrlr Address */
+#define DCRN_SDRAM0_CFGDATA	(DCRN_SDRAM0_BASE + 0x1) /* Mem Ctrlr Data */
+#endif
+
+#ifdef DCRN_UIC0_BASE
+#define DCRN_UIC0_SR	(DCRN_UIC0_BASE + 0x0)
+#define DCRN_UIC0_ER	(DCRN_UIC0_BASE + 0x2)
+#define DCRN_UIC0_CR	(DCRN_UIC0_BASE + 0x3)
+#define DCRN_UIC0_PR	(DCRN_UIC0_BASE + 0x4)
+#define DCRN_UIC0_TR	(DCRN_UIC0_BASE + 0x5)
+#define DCRN_UIC0_MSR	(DCRN_UIC0_BASE + 0x6)
+#define DCRN_UIC0_VR	(DCRN_UIC0_BASE + 0x7)
+#define DCRN_UIC0_VCR	(DCRN_UIC0_BASE + 0x8)
+#endif
+
+#ifdef DCRN_UIC1_BASE
+#define DCRN_UIC1_SR	(DCRN_UIC1_BASE + 0x0)
+#define DCRN_UIC1_SRS	(DCRN_UIC1_BASE + 0x1)
+#define DCRN_UIC1_ER	(DCRN_UIC1_BASE + 0x2)
+#define DCRN_UIC1_CR	(DCRN_UIC1_BASE + 0x3)
+#define DCRN_UIC1_PR	(DCRN_UIC1_BASE + 0x4)
+#define DCRN_UIC1_TR	(DCRN_UIC1_BASE + 0x5)
+#define DCRN_UIC1_MSR	(DCRN_UIC1_BASE + 0x6)
+#define DCRN_UIC1_VR	(DCRN_UIC1_BASE + 0x7)
+#define DCRN_UIC1_VCR	(DCRN_UIC1_BASE + 0x8)
+#endif
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR	(DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
+#define DCRN_SDRAM0_CFGDATA	(DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
+#endif
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC	(DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR	(DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
+#define DCRN_OCMDSARC	(DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR	(DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
+#endif
+
+#endif /* __ASM_IBM403_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm405.h b/include/asm-ppc/ibm405.h
new file mode 100644
index 000000000000..4e5be9e2c153
--- /dev/null
+++ b/include/asm-ppc/ibm405.h
@@ -0,0 +1,299 @@
+/*
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM405_H__
+#define __ASM_IBM405_H__
+
+#ifdef DCRN_BE_BASE
+#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
+#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
+#endif
+/* DCRN_BESR */
+#define BESR_DSES	0x80000000	/* Data-Side Error Status */
+#define BESR_DMES	0x40000000	/* DMA Error Status */
+#define BESR_RWS	0x20000000	/* Read/Write Status */
+#define BESR_ETMASK	0x1C000000	/* Error Type */
+#define ET_PROT	0
+#define ET_PARITY	1
+#define ET_NCFG	2
+#define ET_BUSERR	4
+#define ET_BUSTO	6
+
+/* Clock and power management shifts for emacs */
+#define IBM_CPM_EMMII	0	/* Shift value for MII */
+#define IBM_CPM_EMRX	1	/* Shift value for recv */
+#define IBM_CPM_EMTX	2	/* Shift value for MAC */
+
+#ifdef DCRN_CHCR_BASE
+#define DCRN_CHCR0	(DCRN_CHCR_BASE + 0x0)	/* Chip Control Register 1 */
+#define DCRN_CHCR1	(DCRN_CHCR_BASE + 0x1)	/* Chip Control Register 2 */
+#endif
+#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
+
+#ifdef DCRN_CHPSR_BASE
+#define DCRN_CHPSR	(DCRN_CHPSR_BASE + 0x0)	/* Chip Pin Strapping */
+#endif
+
+#ifdef DCRN_CPMFR_BASE
+#define DCRN_CPMFR	(DCRN_CPMFR_BASE + 0x0)	/* CPM Force */
+#endif
+
+#ifdef DCRN_CPMSR_BASE
+#define DCRN_CPMSR	(DCRN_CPMSR_BASE + 0x0)	/* CPM Status */
+#define DCRN_CPMER	(DCRN_CPMSR_BASE + 0x1)	/* CPM Enable */
+#endif
+
+#ifdef DCRN_DCP0_BASE
+/* Decompression Controller Address */
+#define DCRN_DCP0_CFGADDR	(DCRN_DCP0_BASE + 0x0)
+/* Decompression Controller Data */
+#define DCRN_DCP0_CFGDATA	(DCRN_DCP0_BASE + 0x1)
+#else
+#define DCRN_DCP0_CFGADDR	0x0
+#define DCRN_DCP0_CFGDATA	0x0
+#endif
+
+#ifdef DCRN_DMA0_BASE
+/* DMA Channel Control Register 0 */
+#define DCRN_DMACR0	(DCRN_DMA0_BASE + 0x0)
+#define DCRN_DMACT0	(DCRN_DMA0_BASE + 0x1)	/* DMA Count Register 0 */
+/* DMA Destination Address Register 0 */
+#define DCRN_DMADA0	(DCRN_DMA0_BASE + 0x2)
+/* DMA Source Address Register 0 */
+#define DCRN_DMASA0	(DCRN_DMA0_BASE + 0x3)
+#ifdef DCRNCAP_DMA_CC
+/* DMA Chained Count Register 0 */
+#define DCRN_DMACC0	(DCRN_DMA0_BASE + 0x4)
+#endif
+#ifdef DCRNCAP_DMA_SG
+/* DMA Scatter/Gather Descriptor Addr 0 */
+#define DCRN_ASG0	(DCRN_DMA0_BASE + 0x4)
+#endif
+#endif
+
+#ifdef DCRN_DMA1_BASE
+/* DMA Channel Control Register 1 */
+#define DCRN_DMACR1	(DCRN_DMA1_BASE + 0x0)
+#define DCRN_DMACT1	(DCRN_DMA1_BASE + 0x1)	/* DMA Count Register 1 */
+/* DMA Destination Address Register 1 */
+#define DCRN_DMADA1	(DCRN_DMA1_BASE + 0x2)
+/* DMA Source Address Register 1 */
+#define DCRN_DMASA1	(DCRN_DMA1_BASE + 0x3)	/* DMA Source Address Register 1 */
+#ifdef DCRNCAP_DMA_CC
+/* DMA Chained Count Register 1 */
+#define DCRN_DMACC1	(DCRN_DMA1_BASE + 0x4)
+#endif
+#ifdef DCRNCAP_DMA_SG
+/* DMA Scatter/Gather Descriptor Addr 1 */
+#define DCRN_ASG1	(DCRN_DMA1_BASE + 0x4)
+#endif
+#endif
+
+#ifdef DCRN_DMA2_BASE
+#define DCRN_DMACR2	(DCRN_DMA2_BASE + 0x0)	/* DMA Channel Control Register 2 */
+#define DCRN_DMACT2	(DCRN_DMA2_BASE + 0x1)	/* DMA Count Register 2 */
+#define DCRN_DMADA2	(DCRN_DMA2_BASE + 0x2)	/* DMA Destination Address Register 2 */
+#define DCRN_DMASA2	(DCRN_DMA2_BASE + 0x3)	/* DMA Source Address Register 2 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC2	(DCRN_DMA2_BASE + 0x4)	/* DMA Chained Count Register 2 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG2	(DCRN_DMA2_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 2 */
+#endif
+#endif
+
+#ifdef DCRN_DMA3_BASE
+#define DCRN_DMACR3	(DCRN_DMA3_BASE + 0x0)	/* DMA Channel Control Register 3 */
+#define DCRN_DMACT3	(DCRN_DMA3_BASE + 0x1)	/* DMA Count Register 3 */
+#define DCRN_DMADA3	(DCRN_DMA3_BASE + 0x2)	/* DMA Destination Address Register 3 */
+#define DCRN_DMASA3	(DCRN_DMA3_BASE + 0x3)	/* DMA Source Address Register 3 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC3	(DCRN_DMA3_BASE + 0x4)	/* DMA Chained Count Register 3 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG3	(DCRN_DMA3_BASE + 0x4)	/* DMA Scatter/Gather Descriptor Addr 3 */
+#endif
+#endif
+
+#ifdef DCRN_DMASR_BASE
+#define DCRN_DMASR	(DCRN_DMASR_BASE + 0x0)	/* DMA Status Register */
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASGC	(DCRN_DMASR_BASE + 0x3)	/* DMA Scatter/Gather Command */
+/* don't know if these two registers always exist if scatter/gather exists */
+#define DCRN_POL	(DCRN_DMASR_BASE + 0x6)	/* DMA Polarity Register */
+#define DCRN_SLP	(DCRN_DMASR_BASE + 0x5)	/* DMA Sleep Register */
+#endif
+#endif
+
+#ifdef DCRN_EBC_BASE
+#define DCRN_EBCCFGADR	(DCRN_EBC_BASE + 0x0)	/* Peripheral Controller Address */
+#define DCRN_EBCCFGDATA	(DCRN_EBC_BASE + 0x1)	/* Peripheral Controller Data */
+#endif
+
+#ifdef DCRN_EXIER_BASE
+#define DCRN_EXIER	(DCRN_EXIER_BASE + 0x0)	/* External Interrupt Enable Register */
+#endif
+
+#ifdef DCRN_EXISR_BASE
+#define DCRN_EXISR	(DCRN_EXISR_BASE + 0x0)	/* External Interrupt Status Register */
+#endif
+
+#define EXIER_CIE	0x80000000	/* Critical Interrupt Enable */
+#define EXIER_SRIE	0x08000000	/* Serial Port Rx Int. Enable */
+#define EXIER_STIE	0x04000000	/* Serial Port Tx Int. Enable */
+#define EXIER_JRIE	0x02000000	/* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE	0x01000000	/* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE	0x00800000	/* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE	0x00400000	/* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE	0x00200000	/* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE	0x00100000	/* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE	0x00000010	/* External Interrupt 0 Enable */
+#define EXIER_E1IE	0x00000008	/* External Interrupt 1 Enable */
+#define EXIER_E2IE	0x00000004	/* External Interrupt 2 Enable */
+#define EXIER_E3IE	0x00000002	/* External Interrupt 3 Enable */
+#define EXIER_E4IE	0x00000001	/* External Interrupt 4 Enable */
+
+#ifdef DCRN_IOCR_BASE
+#define DCRN_IOCR	(DCRN_IOCR_BASE + 0x0)	/* Input/Output Configuration Register */
+#endif
+#define IOCR_E0TE	0x80000000
+#define IOCR_E0LP	0x40000000
+#define IOCR_E1TE	0x20000000
+#define IOCR_E1LP	0x10000000
+#define IOCR_E2TE	0x08000000
+#define IOCR_E2LP	0x04000000
+#define IOCR_E3TE	0x02000000
+#define IOCR_E3LP	0x01000000
+#define IOCR_E4TE	0x00800000
+#define IOCR_E4LP	0x00400000
+#define IOCR_EDT	0x00080000
+#define IOCR_SOR	0x00040000
+#define IOCR_EDO	0x00008000
+#define IOCR_2XC	0x00004000
+#define IOCR_ATC	0x00002000
+#define IOCR_SPD	0x00001000
+#define IOCR_BEM	0x00000800
+#define IOCR_PTD	0x00000400
+#define IOCR_ARE	0x00000080
+#define IOCR_DRC	0x00000020
+#define IOCR_RDM(x)	(((x) & 0x3) << 3)
+#define IOCR_TCS	0x00000004
+#define IOCR_SCS	0x00000002
+#define IOCR_SPC	0x00000001
+
+#define DCRN_MALCR(base)	(base + 0x0)	/* MAL Configuration */
+#define DCRN_MALDBR(base)	((base) + 0x3)	/* Debug Register */
+#define DCRN_MALESR(base)	((base) + 0x1)	/* Error Status */
+#define DCRN_MALIER(base)	((base) + 0x2)	/* Interrupt Enable */
+#define DCRN_MALTXCARR(base)	((base) + 0x5)	/* TX Channed Active Reset Register */
+#define DCRN_MALTXCASR(base)	((base) + 0x4)	/* TX Channel Active Set Register */
+#define DCRN_MALTXDEIR(base)	((base) + 0x7)	/* Tx Descriptor Error Interrupt */
+#define DCRN_MALTXEOBISR(base)	((base) + 0x6)	/* Tx End of Buffer Interrupt Status */
+#define DCRN_MALRXCARR(base)	((base) + 0x11)	/* RX Channed Active Reset Register */
+#define DCRN_MALRXCASR(base)	((base) + 0x10)	/* RX Channel Active Set Register */
+#define DCRN_MALRXDEIR(base)	((base) + 0x13)	/* Rx Descriptor Error Interrupt */
+#define DCRN_MALRXEOBISR(base)	((base) + 0x12)	/* Rx End of Buffer Interrupt Status */
+#define DCRN_MALRXCTP0R(base)	((base) + 0x40)	/* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALRXCTP1R(base)	((base) + 0x41)	/* Channel Rx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP0R(base)	((base) + 0x20)	/* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R(base)	((base) + 0x21)	/* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP2R(base)	((base) + 0x22)	/* Channel Tx 2 Channel Table Pointer */
+#define DCRN_MALTXCTP3R(base)	((base) + 0x23)	/* Channel Tx 3 Channel Table Pointer */
+#define DCRN_MALRCBS0(base)	((base) + 0x60)	/* Channel Rx 0 Channel Buffer Size */
+#define DCRN_MALRCBS1(base)	((base) + 0x61)	/* Channel Rx 1 Channel Buffer Size */
+
+ /* DCRN_MALCR */
+#define MALCR_MMSR		0x80000000	/* MAL Software reset */
+#define MALCR_PLBP_1		0x00400000	/* MAL reqest priority: */
+#define MALCR_PLBP_2		0x00800000	/* lowsest is 00 */
+#define MALCR_PLBP_3		0x00C00000	/* highest */
+#define MALCR_GA		0x00200000	/* Guarded Active Bit */
+#define MALCR_OA		0x00100000	/* Ordered Active Bit */
+#define MALCR_PLBLE		0x00080000	/* PLB Lock Error Bit */
+#define MALCR_PLBLT_1		0x00040000	/* PLB Latency Timer */
+#define MALCR_PLBLT_2 		0x00020000
+#define MALCR_PLBLT_3		0x00010000
+#define MALCR_PLBLT_4		0x00008000
+#define MALCR_PLBLT_DEFAULT	0x00078000	/* JSP: Is this a valid default?? */
+#define MALCR_PLBB		0x00004000	/* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL		0x00000080	/* OPB Lock Bit */
+#define MALCR_EOPIE		0x00000004	/* End Of Packet Interrupt Enable */
+#define MALCR_LEA		0x00000002	/* Locked Error Active */
+#define MALCR_MSD		0x00000001	/* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB		0x80000000	/* Error Valid Bit */
+#define MALESR_CIDRX		0x40000000	/* Channel ID Receive */
+#define MALESR_DE		0x00100000	/* Descriptor Error */
+#define MALESR_OEN		0x00080000	/* OPB Non-Fullword Error */
+#define MALESR_OTE		0x00040000	/* OPB Timeout Error */
+#define MALESR_OSE		0x00020000	/* OPB Slave Error */
+#define MALESR_PEIN		0x00010000	/* PLB Bus Error Indication */
+#define MALESR_DEI		0x00000010	/* Descriptor Error Interrupt */
+#define MALESR_ONEI		0x00000008	/* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI		0x00000004	/* OPB Timeout Error Interrupt */
+#define MALESR_OSEI		0x00000002	/* OPB Slace Error Interrupt */
+#define MALESR_PBEI		0x00000001	/* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE		0x00000010	/* Descriptor Error Interrupt Enable */
+#define MALIER_NE		0x00000008	/* OPB Non-word Transfer Int Enable */
+#define MALIER_TE		0x00000004	/* OPB Time Out Error Interrupt Enable */
+#define MALIER_OPBE		0x00000002	/* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE		0x00000001	/* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0		0x80000000	/* EOB channel 1 bit */
+#define MALOBISR_CH2		0x40000000	/* EOB channel 2 bit */
+
+#ifdef DCRN_PLB0_BASE
+#define DCRN_PLB0_BESR	(DCRN_PLB0_BASE + 0x0)
+#define DCRN_PLB0_BEAR	(DCRN_PLB0_BASE + 0x2)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB0_ACR	(DCRN_PLB0_BASE + 0x3)
+#endif
+
+#ifdef DCRN_PLB1_BASE
+#define DCRN_PLB1_BESR	(DCRN_PLB1_BASE + 0x0)
+#define DCRN_PLB1_BEAR	(DCRN_PLB1_BASE + 0x1)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB1_ACR	(DCRN_PLB1_BASE + 0x2)
+#endif
+
+#ifdef DCRN_PLLMR_BASE
+#define DCRN_PLLMR	(DCRN_PLLMR_BASE + 0x0)	/* PL1 Mode */
+#endif
+
+#ifdef DCRN_POB0_BASE
+#define DCRN_POB0_BESR0	(DCRN_POB0_BASE + 0x0)
+#define DCRN_POB0_BEAR	(DCRN_POB0_BASE + 0x2)
+#define DCRN_POB0_BESR1	(DCRN_POB0_BASE + 0x4)
+#endif
+
+#define DCRN_UIC_SR(base)	(base + 0x0)
+#define DCRN_UIC_ER(base)	(base + 0x2)
+#define DCRN_UIC_CR(base)	(base + 0x3)
+#define DCRN_UIC_PR(base)	(base + 0x4)
+#define DCRN_UIC_TR(base)	(base + 0x5)
+#define DCRN_UIC_MSR(base)	(base + 0x6)
+#define DCRN_UIC_VR(base)	(base + 0x7)
+#define DCRN_UIC_VCR(base)	(base + 0x8)
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR	(DCRN_SDRAM0_BASE + 0x0)	/* Memory Controller Address */
+#define DCRN_SDRAM0_CFGDATA	(DCRN_SDRAM0_BASE + 0x1)	/* Memory Controller Data */
+#endif
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC	(DCRN_OCM0_BASE + 0x0)	/* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR	(DCRN_OCM0_BASE + 0x1)	/* OCM Instr Side Control */
+#define DCRN_OCMDSARC	(DCRN_OCM0_BASE + 0x2)	/* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR	(DCRN_OCM0_BASE + 0x3)	/* OCM Data Side Control */
+#endif
+
+#endif				/* __ASM_IBM405_H__ */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
new file mode 100644
index 000000000000..87f051138b9d
--- /dev/null
+++ b/include/asm-ppc/ibm44x.h
@@ -0,0 +1,599 @@
+/*
+ * include/asm-ppc/ibm44x.h
+ *
+ * PPC44x definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM44x_H__
+#define __ASM_IBM44x_H__
+
+#include <linux/config.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+
+/* TLB entry offset/size used for pinning kernel lowmem */
+#define PPC44x_PIN_SHIFT	28
+#define PPC44x_PIN_SIZE		(1 << PPC44x_PIN_SHIFT)
+
+/* Lowest TLB slot consumed by the default pinned TLBs */
+#define PPC44x_LOW_SLOT		63
+
+/* LS 32-bits of UART0 physical address location for early serial text debug */
+#ifdef CONFIG_440SP
+#define UART0_PHYS_IO_BASE	0xf0000200
+#else
+#define UART0_PHYS_IO_BASE	0x40000200
+#endif
+
+/*
+ * XXX This 36-bit trap stuff will move somewhere in syslib/
+ * when we rework/abstract the PPC44x PCI-X handling -mdp
+ */
+
+/*
+ * Standard 4GB "page" definitions
+ */
+#ifdef CONFIG_440SP
+#define	PPC44x_IO_PAGE		0x0000000100000000ULL
+#define	PPC44x_PCICFG_PAGE	0x0000000900000000ULL
+#define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
+#define	PPC44x_PCIMEM_PAGE	0x0000000a00000000ULL
+#else
+#define	PPC44x_IO_PAGE		0x0000000100000000ULL
+#define	PPC44x_PCICFG_PAGE	0x0000000200000000ULL
+#define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
+#define	PPC44x_PCIMEM_PAGE	0x0000000300000000ULL
+#endif
+
+/*
+ * 36-bit trap ranges
+ */
+#ifdef CONFIG_440SP
+#define PPC44x_IO_LO		0xf0000000UL
+#define PPC44x_IO_HI		0xf0000fffUL
+#define PPC44x_PCI0CFG_LO	0x0ec00000UL
+#define PPC44x_PCI0CFG_HI	0x0ec00007UL
+#define PPC44x_PCI1CFG_LO	0x1ec00000UL
+#define PPC44x_PCI1CFG_HI	0x1ec00007UL
+#define PPC44x_PCI2CFG_LO	0x2ec00000UL
+#define PPC44x_PCI2CFG_HI	0x2ec00007UL
+#define PPC44x_PCIMEM_LO	0x80000000UL
+#define PPC44x_PCIMEM_HI	0xdfffffffUL
+#else
+#define PPC44x_IO_LO		0x40000000UL
+#define PPC44x_IO_HI		0x40000fffUL
+#define PPC44x_PCI0CFG_LO	0x0ec00000UL
+#define PPC44x_PCI0CFG_HI	0x0ec00007UL
+#define PPC44x_PCIMEM_LO	0x80002000UL
+#define PPC44x_PCIMEM_HI	0xffffffffUL
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+#ifndef __ASSEMBLY__
+
+/*
+ * DCRN definitions
+ */
+
+
+/* CPRs (440GX and 440SP) */
+#define DCRN_CPR_CONFIG_ADDR	0xc
+#define DCRN_CPR_CONFIG_DATA	0xd
+
+#define DCRN_CPR_CLKUPD		0x0020
+#define DCRN_CPR_PLLC		0x0040
+#define DCRN_CPR_PLLD		0x0060
+#define DCRN_CPR_PRIMAD		0x0080
+#define DCRN_CPR_PRIMBD		0x00a0
+#define DCRN_CPR_OPBD		0x00c0
+#define DCRN_CPR_PERD		0x00e0
+#define DCRN_CPR_MALD		0x0100
+
+/* CPRs read/write helper macros */
+#define CPR_READ(offset) ({\
+	mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
+	mfdcr(DCRN_CPR_CONFIG_DATA);})
+#define CPR_WRITE(offset, data) ({\
+	mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
+	mtdcr(DCRN_CPR_CONFIG_DATA, data);})
+
+/* SDRs (440GX and 440SP) */
+#define DCRN_SDR_CONFIG_ADDR 	0xe
+#define DCRN_SDR_CONFIG_DATA	0xf
+#define DCRN_SDR_PFC0		0x4100
+#define DCRN_SDR_PFC1		0x4101
+#define DCRN_SDR_PFC1_EPS	0x1c00000
+#define DCRN_SDR_PFC1_EPS_SHIFT	22
+#define DCRN_SDR_PFC1_RMII	0x02000000
+#define DCRN_SDR_MFR		0x4300
+#define DCRN_SDR_MFR_TAH0 	0x80000000  	/* TAHOE0 Enable */
+#define DCRN_SDR_MFR_TAH1 	0x40000000  	/* TAHOE1 Enable */
+#define DCRN_SDR_MFR_PCM  	0x10000000  	/* PPC440GP irq compat mode */
+#define DCRN_SDR_MFR_ECS  	0x08000000  	/* EMAC int clk */
+#define DCRN_SDR_MFR_T0TXFL	0x00080000
+#define DCRN_SDR_MFR_T0TXFH	0x00040000
+#define DCRN_SDR_MFR_T1TXFL	0x00020000
+#define DCRN_SDR_MFR_T1TXFH	0x00010000
+#define DCRN_SDR_MFR_E0TXFL	0x00008000
+#define DCRN_SDR_MFR_E0TXFH	0x00004000
+#define DCRN_SDR_MFR_E0RXFL	0x00002000
+#define DCRN_SDR_MFR_E0RXFH	0x00001000
+#define DCRN_SDR_MFR_E1TXFL	0x00000800
+#define DCRN_SDR_MFR_E1TXFH	0x00000400
+#define DCRN_SDR_MFR_E1RXFL	0x00000200
+#define DCRN_SDR_MFR_E1RXFH	0x00000100
+#define DCRN_SDR_MFR_E2TXFL	0x00000080
+#define DCRN_SDR_MFR_E2TXFH	0x00000040
+#define DCRN_SDR_MFR_E2RXFL	0x00000020
+#define DCRN_SDR_MFR_E2RXFH	0x00000010
+#define DCRN_SDR_MFR_E3TXFL	0x00000008
+#define DCRN_SDR_MFR_E3TXFH	0x00000004
+#define DCRN_SDR_MFR_E3RXFL	0x00000002
+#define DCRN_SDR_MFR_E3RXFH	0x00000001
+#define DCRN_SDR_UART0		0x0120
+#define DCRN_SDR_UART1		0x0121
+
+/* SDR read/write helper macros */
+#define SDR_READ(offset) ({\
+	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
+	mfdcr(DCRN_SDR_CONFIG_DATA);})
+#define SDR_WRITE(offset, data) ({\
+	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
+	mtdcr(DCRN_SDR_CONFIG_DATA,data);})
+
+/* DMA (excluding 440SP) */
+#define DCRN_DMA0_BASE		0x100
+#define DCRN_DMA1_BASE		0x108
+#define DCRN_DMA2_BASE		0x110
+#define DCRN_DMA3_BASE		0x118
+#define DCRN_DMASR_BASE		0x120
+#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
+#define DCRN_MAL_BASE		0x180
+
+/* UIC */
+#define DCRN_UIC0_BASE	0xc0
+#define DCRN_UIC1_BASE	0xd0
+#define DCRN_UIC2_BASE	0x210
+#define DCRN_UICB_BASE	0x200
+#define UIC0		DCRN_UIC0_BASE
+#define UIC1		DCRN_UIC1_BASE
+#define UIC2		DCRN_UIC2_BASE
+#define UICB		DCRN_UICB_BASE
+
+#define DCRN_UIC_SR(base)       (base + 0x0)
+#define DCRN_UIC_ER(base)       (base + 0x2)
+#define DCRN_UIC_CR(base)       (base + 0x3)
+#define DCRN_UIC_PR(base)       (base + 0x4)
+#define DCRN_UIC_TR(base)       (base + 0x5)
+#define DCRN_UIC_MSR(base)      (base + 0x6)
+#define DCRN_UIC_VR(base)       (base + 0x7)
+#define DCRN_UIC_VCR(base)      (base + 0x8)
+
+#define UIC0_UIC1NC      	0x00000002
+
+#define UICB_UIC0NC		0x40000000
+#define UICB_UIC1NC		0x10000000
+#define UICB_UIC2NC		0x04000000
+
+/* 440 MAL DCRs */
+#define DCRN_MALCR(base)		(base + 0x0)	/* Configuration */
+#define DCRN_MALESR(base)		(base + 0x1)	/* Error Status */
+#define DCRN_MALIER(base)		(base + 0x2)	/* Interrupt Enable */
+#define DCRN_MALTXCASR(base)		(base + 0x4)	/* Tx Channel Active Set */
+#define DCRN_MALTXCARR(base)		(base + 0x5)	/* Tx Channel Active Reset */
+#define DCRN_MALTXEOBISR(base)		(base + 0x6)	/* Tx End of Buffer Interrupt Status */
+#define DCRN_MALTXDEIR(base)		(base + 0x7)	/* Tx Descriptor Error Interrupt */
+#define DCRN_MALRXCASR(base)		(base + 0x10)	/* Rx Channel Active Set */
+#define DCRN_MALRXCARR(base)		(base + 0x11)	/* Rx Channel Active Reset */
+#define DCRN_MALRXEOBISR(base)		(base + 0x12)	/* Rx End of Buffer Interrupt Status */
+#define DCRN_MALRXDEIR(base)		(base + 0x13)	/* Rx Descriptor Error Interrupt */
+#define DCRN_MALTXCTP0R(base)		(base + 0x20)	/* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R(base)		(base + 0x21)	/* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP2R(base)		(base + 0x22)	/* Channel Tx 2 Channel Table Pointer */
+#define DCRN_MALTXCTP3R(base)		(base + 0x23)	/* Channel Tx 3 Channel Table Pointer */
+#define DCRN_MALRXCTP0R(base)		(base + 0x40)	/* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALRXCTP1R(base)		(base + 0x41)	/* Channel Rx 1 Channel Table Pointer */
+#define DCRN_MALRCBS0(base)		(base + 0x60)	/* Channel Rx 0 Channel Buffer Size */
+#define DCRN_MALRCBS1(base)		(base + 0x61)	/* Channel Rx 1 Channel Buffer Size */
+
+/* Compatibility DCRN's */
+#define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
+#define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
+#define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
+#define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
+#define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
+#define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
+#define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
+#define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */
+
+#define MALCR_MMSR		0x80000000	/* MAL Software reset */
+#define MALCR_PLBP_1		0x00400000	/* MAL reqest priority: */
+#define MALCR_PLBP_2		0x00800000	/* lowsest is 00 */
+#define MALCR_PLBP_3		0x00C00000	/* highest */
+#define MALCR_GA		0x00200000	/* Guarded Active Bit */
+#define MALCR_OA		0x00100000	/* Ordered Active Bit */
+#define MALCR_PLBLE		0x00080000	/* PLB Lock Error Bit */
+#define MALCR_PLBLT_1		0x00040000	/* PLB Latency Timer */
+#define MALCR_PLBLT_2 		0x00020000
+#define MALCR_PLBLT_3		0x00010000
+#define MALCR_PLBLT_4		0x00008000
+#ifdef CONFIG_440GP
+#define MALCR_PLBLT_DEFAULT	0x00330000	/* PLB Latency Timer default */
+#else
+#define MALCR_PLBLT_DEFAULT	0x00ff0000	/* PLB Latency Timer default */
+#endif
+#define MALCR_PLBB		0x00004000	/* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL		0x00000080	/* OPB Lock Bit */
+#define MALCR_EOPIE		0x00000004	/* End Of Packet Interrupt Enable */
+#define MALCR_LEA		0x00000002	/* Locked Error Active */
+#define MALCR_MSD		0x00000001	/* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB		0x80000000	/* Error Valid Bit */
+#define MALESR_CIDRX		0x40000000	/* Channel ID Receive */
+#define MALESR_DE		0x00100000	/* Descriptor Error */
+#define MALESR_OEN		0x00080000	/* OPB Non-Fullword Error */
+#define MALESR_OTE		0x00040000	/* OPB Timeout Error */
+#define MALESR_OSE		0x00020000	/* OPB Slave Error */
+#define MALESR_PEIN		0x00010000	/* PLB Bus Error Indication */
+#define MALESR_DEI		0x00000010	/* Descriptor Error Interrupt */
+#define MALESR_ONEI		0x00000008	/* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI		0x00000004	/* OPB Timeout Error Interrupt */
+#define MALESR_OSEI		0x00000002	/* OPB Slace Error Interrupt */
+#define MALESR_PBEI		0x00000001	/* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE		0x00000010	/* Descriptor Error Interrupt Enable */
+#define MALIER_NE		0x00000008	/* OPB Non-word Transfer Int Enable */
+#define MALIER_TE		0x00000004	/* OPB Time Out Error Interrupt Enable */
+#define MALIER_OPBE		0x00000002	/* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE		0x00000001	/* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0		0x80000000	/* EOB channel 1 bit */
+#define MALOBISR_CH2		0x40000000	/* EOB channel 2 bit */
+
+/* 440GP/GX PLB Arbiter DCRs */
+#define DCRN_PLB0_REVID		0x082		/* PLB Arbiter Revision ID */
+#define DCRN_PLB0_ACR		0x083		/* PLB Arbiter Control */
+#define DCRN_PLB0_BESR		0x084		/* PLB Error Status */
+#define DCRN_PLB0_BEARL		0x086		/* PLB Error Address Low */
+#define DCRN_PLB0_BEAR		DCRN_PLB0_BEARL	/* 40x compatibility */
+#define DCRN_PLB0_BEARH		0x087		/* PLB Error Address High */
+
+/* 440GP/GX PLB to OPB bridge DCRs */
+#define DCRN_POB0_BESR0		0x090
+#define DCRN_POB0_BESR1		0x094
+#define DCRN_POB0_BEARL		0x092
+#define DCRN_POB0_BEARH		0x093
+
+/* 440GP/GX OPB to PLB bridge DCRs */
+#define DCRN_OPB0_BSTAT		0x0a9
+#define DCRN_OPB0_BEARL		0x0aa
+#define DCRN_OPB0_BEARH		0x0ab
+
+/* 440GP Clock, PM, chip control */
+#define DCRN_CPC0_SR		0x0b0
+#define DCRN_CPC0_ER		0x0b1
+#define DCRN_CPC0_FR		0x0b2
+#define DCRN_CPC0_SYS0		0x0e0
+#define DCRN_CPC0_SYS1		0x0e1
+#define DCRN_CPC0_CUST0		0x0e2
+#define DCRN_CPC0_CUST1		0x0e3
+#define DCRN_CPC0_STRP0		0x0e4
+#define DCRN_CPC0_STRP1		0x0e5
+#define DCRN_CPC0_STRP2		0x0e6
+#define DCRN_CPC0_STRP3		0x0e7
+#define DCRN_CPC0_GPIO		0x0e8
+#define DCRN_CPC0_PLB		0x0e9
+#define DCRN_CPC0_CR1		0x0ea
+#define DCRN_CPC0_CR0		0x0eb
+#define DCRN_CPC0_MIRQ0		0x0ec
+#define DCRN_CPC0_MIRQ1		0x0ed
+#define DCRN_CPC0_JTAGID	0x0ef
+
+/* 440GP DMA controller DCRs */
+#define DCRN_DMACR0	(DCRN_DMA0_BASE + 0x0)	/* DMA Channel Control 0 */
+#define DCRN_DMACT0	(DCRN_DMA0_BASE + 0x1)  /* DMA Count 0 */
+#define DCRN_DMASAH0	(DCRN_DMA0_BASE + 0x2)	/* DMA Src Addr High 0 */
+#define DCRN_DMASA0	(DCRN_DMA0_BASE + 0x3)	/* DMA Src Addr Low 0 */
+#define DCRN_DMADAH0	(DCRN_DMA0_BASE + 0x4)	/* DMA Dest Addr High 0 */
+#define DCRN_DMADA0	(DCRN_DMA0_BASE + 0x5)	/* DMA Dest Addr Low 0 */
+#define DCRN_ASGH0	(DCRN_DMA0_BASE + 0x6)	/* DMA SG Desc Addr High 0 */
+#define DCRN_ASG0	(DCRN_DMA0_BASE + 0x7)	/* DMA SG Desc Addr Low 0 */
+
+#define DCRN_DMACR1	(DCRN_DMA1_BASE + 0x0)	/* DMA Channel Control 1 */
+#define DCRN_DMACT1	(DCRN_DMA1_BASE + 0x1)  /* DMA Count 1 */
+#define DCRN_DMASAH1	(DCRN_DMA1_BASE + 0x2)	/* DMA Src Addr High 1 */
+#define DCRN_DMASA1	(DCRN_DMA1_BASE + 0x3)	/* DMA Src Addr Low 1 */
+#define DCRN_DMADAH1	(DCRN_DMA1_BASE + 0x4)	/* DMA Dest Addr High 1 */
+#define DCRN_DMADA1	(DCRN_DMA1_BASE + 0x5)	/* DMA Dest Addr Low 1 */
+#define DCRN_ASGH1	(DCRN_DMA1_BASE + 0x6)	/* DMA SG Desc Addr High 1 */
+#define DCRN_ASG1	(DCRN_DMA1_BASE + 0x7)	/* DMA SG Desc Addr Low 1 */
+
+#define DCRN_DMACR2	(DCRN_DMA2_BASE + 0x0)	/* DMA Channel Control 2 */
+#define DCRN_DMACT2	(DCRN_DMA2_BASE + 0x1)  /* DMA Count 2 */
+#define DCRN_DMASAH2	(DCRN_DMA2_BASE + 0x2)	/* DMA Src Addr High 2 */
+#define DCRN_DMASA2	(DCRN_DMA2_BASE + 0x3)	/* DMA Src Addr Low 2 */
+#define DCRN_DMADAH2	(DCRN_DMA2_BASE + 0x4)	/* DMA Dest Addr High 2 */
+#define DCRN_DMADA2	(DCRN_DMA2_BASE + 0x5)	/* DMA Dest Addr Low 2 */
+#define DCRN_ASGH2	(DCRN_DMA2_BASE + 0x6)	/* DMA SG Desc Addr High 2 */
+#define DCRN_ASG2	(DCRN_DMA2_BASE + 0x7)	/* DMA SG Desc Addr Low 2 */
+
+#define DCRN_DMACR3	(DCRN_DMA3_BASE + 0x0)	/* DMA Channel Control 3 */
+#define DCRN_DMACT3	(DCRN_DMA3_BASE + 0x1)  /* DMA Count 3 */
+#define DCRN_DMASAH3	(DCRN_DMA3_BASE + 0x2)	/* DMA Src Addr High 3 */
+#define DCRN_DMASA3	(DCRN_DMA3_BASE + 0x3)	/* DMA Src Addr Low 3 */
+#define DCRN_DMADAH3	(DCRN_DMA3_BASE + 0x4)	/* DMA Dest Addr High 3 */
+#define DCRN_DMADA3	(DCRN_DMA3_BASE + 0x5)	/* DMA Dest Addr Low 3 */
+#define DCRN_ASGH3	(DCRN_DMA3_BASE + 0x6)	/* DMA SG Desc Addr High 3 */
+#define DCRN_ASG3	(DCRN_DMA3_BASE + 0x7)	/* DMA SG Desc Addr Low 3 */
+
+#define DCRN_DMASR	(DCRN_DMASR_BASE + 0x0)	/* DMA Status Register */
+#define DCRN_ASGC	(DCRN_DMASR_BASE + 0x3)	/* DMA Scatter/Gather Command */
+#define DCRN_SLP	(DCRN_DMASR_BASE + 0x5)	/* DMA Sleep Register */
+#define DCRN_POL	(DCRN_DMASR_BASE + 0x6)	/* DMA Polarity Register */
+
+/* 440GP/440GX SDRAM controller DCRs */
+#define DCRN_SDRAM0_CFGADDR		0x010
+#define DCRN_SDRAM0_CFGDATA		0x011
+
+#define SDRAM0_B0CR	0x40
+#define SDRAM0_B1CR	0x44
+#define SDRAM0_B2CR	0x48
+#define SDRAM0_B3CR	0x4c
+
+#define SDRAM_CONFIG_BANK_ENABLE	0x00000001
+#define SDRAM_CONFIG_SIZE_MASK		0x000e0000
+#define SDRAM_CONFIG_BANK_SIZE(reg)	((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)
+#define SDRAM_CONFIG_SIZE_8M		0x00000001
+#define SDRAM_CONFIG_SIZE_16M		0x00000002
+#define SDRAM_CONFIG_SIZE_32M		0x00000003
+#define SDRAM_CONFIG_SIZE_64M		0x00000004
+#define SDRAM_CONFIG_SIZE_128M		0x00000005
+#define SDRAM_CONFIG_SIZE_256M		0x00000006
+#define SDRAM_CONFIG_SIZE_512M		0x00000007
+#define PPC44x_MEM_SIZE_8M		0x00800000
+#define PPC44x_MEM_SIZE_16M		0x01000000
+#define PPC44x_MEM_SIZE_32M		0x02000000
+#define PPC44x_MEM_SIZE_64M		0x04000000
+#define PPC44x_MEM_SIZE_128M		0x08000000
+#define PPC44x_MEM_SIZE_256M		0x10000000
+#define PPC44x_MEM_SIZE_512M		0x20000000
+#define PPC44x_MEM_SIZE_1G		0x40000000
+#define PPC44x_MEM_SIZE_2G		0x80000000
+
+/* 440SP memory controller DCRs */
+#define DCRN_MQ0_BS0BAS			0x40
+#define DCRN_MQ0_BS1BAS			0x41
+
+#define MQ0_CONFIG_SIZE_MASK		0x0000fff0
+#define MQ0_CONFIG_SIZE_8M		0x0000ffc0
+#define MQ0_CONFIG_SIZE_16M		0x0000ff80
+#define MQ0_CONFIG_SIZE_32M		0x0000ff00
+#define MQ0_CONFIG_SIZE_64M		0x0000fe00
+#define MQ0_CONFIG_SIZE_128M		0x0000fc00
+#define MQ0_CONFIG_SIZE_256M		0x0000f800
+#define MQ0_CONFIG_SIZE_512M		0x0000f000
+#define MQ0_CONFIG_SIZE_1G		0x0000e000
+#define MQ0_CONFIG_SIZE_2G		0x0000c000
+
+/* Internal SRAM Controller 440GX/440SP */
+#ifdef CONFIG_440SP
+#define DCRN_SRAM0_BASE		0x100
+#else /* 440GX */
+#define DCRN_SRAM0_BASE		0x000
+#endif
+
+#define DCRN_SRAM0_SB0CR	(DCRN_SRAM0_BASE + 0x020)
+#define DCRN_SRAM0_SB1CR	(DCRN_SRAM0_BASE + 0x021)
+#define DCRN_SRAM0_SB2CR	(DCRN_SRAM0_BASE + 0x022)
+#define DCRN_SRAM0_SB3CR	(DCRN_SRAM0_BASE + 0x023)
+#define  SRAM_SBCR_BAS0		0x80000000
+#define  SRAM_SBCR_BAS1		0x80010000
+#define  SRAM_SBCR_BAS2		0x80020000
+#define  SRAM_SBCR_BAS3		0x80030000
+#define  SRAM_SBCR_BU_MASK	0x00000180
+#define  SRAM_SBCR_BS_64KB	0x00000800
+#define  SRAM_SBCR_BU_RO	0x00000080
+#define  SRAM_SBCR_BU_RW	0x00000180
+#define DCRN_SRAM0_BEAR		(DCRN_SRAM0_BASE + 0x024)
+#define DCRN_SRAM0_BESR0	(DCRN_SRAM0_BASE + 0x025)
+#define DCRN_SRAM0_BESR1	(DCRN_SRAM0_BASE + 0x026)
+#define DCRN_SRAM0_PMEG		(DCRN_SRAM0_BASE + 0x027)
+#define DCRN_SRAM0_CID		(DCRN_SRAM0_BASE + 0x028)
+#define DCRN_SRAM0_REVID	(DCRN_SRAM0_BASE + 0x029)
+#define DCRN_SRAM0_DPC		(DCRN_SRAM0_BASE + 0x02a)
+#define  SRAM_DPC_ENABLE	0x80000000
+
+/* L2 Cache Controller 440GX/440SP */
+#define DCRN_L2C0_CFG		0x030
+#define  L2C_CFG_L2M		0x80000000
+#define  L2C_CFG_ICU		0x40000000
+#define  L2C_CFG_DCU		0x20000000
+#define  L2C_CFG_DCW_MASK	0x1e000000
+#define  L2C_CFG_TPC		0x01000000
+#define  L2C_CFG_CPC		0x00800000
+#define  L2C_CFG_FRAN		0x00200000
+#define  L2C_CFG_SS_MASK	0x00180000
+#define  L2C_CFG_SS_256		0x00000000
+#define  L2C_CFG_CPIM		0x00040000
+#define  L2C_CFG_TPIM		0x00020000
+#define  L2C_CFG_LIM		0x00010000
+#define  L2C_CFG_PMUX_MASK	0x00007000
+#define  L2C_CFG_PMUX_SNP	0x00000000
+#define  L2C_CFG_PMUX_IF	0x00001000
+#define  L2C_CFG_PMUX_DF	0x00002000
+#define  L2C_CFG_PMUX_DS	0x00003000
+#define  L2C_CFG_PMIM		0x00000800
+#define  L2C_CFG_TPEI		0x00000400
+#define  L2C_CFG_CPEI		0x00000200
+#define  L2C_CFG_NAM		0x00000100
+#define  L2C_CFG_SMCM		0x00000080
+#define  L2C_CFG_NBRM		0x00000040
+#define DCRN_L2C0_CMD		0x031
+#define  L2C_CMD_CLR		0x80000000
+#define  L2C_CMD_DIAG		0x40000000
+#define  L2C_CMD_INV		0x20000000
+#define  L2C_CMD_CCP		0x10000000
+#define  L2C_CMD_CTE		0x08000000
+#define  L2C_CMD_STRC		0x04000000
+#define  L2C_CMD_STPC		0x02000000
+#define  L2C_CMD_RPMC		0x01000000
+#define  L2C_CMD_HCC		0x00800000
+#define DCRN_L2C0_ADDR		0x032
+#define DCRN_L2C0_DATA		0x033
+#define DCRN_L2C0_SR		0x034
+#define  L2C_SR_CC		0x80000000
+#define  L2C_SR_CPE		0x40000000
+#define  L2C_SR_TPE		0x20000000
+#define  L2C_SR_LRU		0x10000000
+#define  L2C_SR_PCS		0x08000000
+#define DCRN_L2C0_REVID		0x035
+#define DCRN_L2C0_SNP0		0x036
+#define DCRN_L2C0_SNP1		0x037
+#define  L2C_SNP_BA_MASK	0xffff0000
+#define  L2C_SNP_SSR_MASK	0x0000f000
+#define  L2C_SNP_SSR_32G	0x0000f000
+#define  L2C_SNP_ESR		0x00000800
+
+/*
+ * PCI-X definitions
+ */
+#define PCIX0_CFGA		0x0ec00000UL
+#define PCIX1_CFGA		0x1ec00000UL
+#define PCIX2_CFGA		0x2ec00000UL
+#define PCIX0_CFGD		0x0ec00004UL
+#define PCIX1_CFGD		0x1ec00004UL
+#define PCIX2_CFGD		0x2ec00004UL
+
+#define PCIX0_IO_BASE		0x0000000908000000ULL
+#define PCIX1_IO_BASE		0x0000000908000000ULL
+#define PCIX2_IO_BASE		0x0000000908000000ULL
+#define PCIX_IO_SIZE		0x00010000
+
+#ifdef CONFIG_440SP
+#define PCIX0_REG_BASE		0x000000090ec80000ULL
+#else
+#define PCIX0_REG_BASE		0x000000020ec80000ULL
+#endif
+#define PCIX_REG_OFFSET		0x10000000
+#define PCIX_REG_SIZE		0x200
+
+#define PCIX0_VENDID		0x000
+#define PCIX0_DEVID		0x002
+#define PCIX0_COMMAND		0x004
+#define PCIX0_STATUS		0x006
+#define PCIX0_REVID		0x008
+#define PCIX0_CLS		0x009
+#define PCIX0_CACHELS		0x00c
+#define PCIX0_LATTIM		0x00d
+#define PCIX0_HDTYPE		0x00e
+#define PCIX0_BIST		0x00f
+#define PCIX0_BAR0L		0x010
+#define PCIX0_BAR0H		0x014
+#define PCIX0_BAR1		0x018
+#define PCIX0_BAR2L		0x01c
+#define PCIX0_BAR2H		0x020
+#define PCIX0_BAR3		0x024
+#define PCIX0_CISPTR		0x028
+#define PCIX0_SBSYSVID		0x02c
+#define PCIX0_SBSYSID		0x02e
+#define PCIX0_EROMBA		0x030
+#define PCIX0_CAP		0x034
+#define PCIX0_RES0		0x035
+#define PCIX0_RES1		0x036
+#define PCIX0_RES2		0x038
+#define PCIX0_INTLN		0x03c
+#define PCIX0_INTPN		0x03d
+#define PCIX0_MINGNT		0x03e
+#define PCIX0_MAXLTNCY		0x03f
+#define PCIX0_BRDGOPT1		0x040
+#define PCIX0_BRDGOPT2		0x044
+#define PCIX0_ERREN		0x050
+#define PCIX0_ERRSTS		0x054
+#define PCIX0_PLBBESR		0x058
+#define PCIX0_PLBBEARL		0x05c
+#define PCIX0_PLBBEARH		0x060
+#define PCIX0_POM0LAL		0x068
+#define PCIX0_POM0LAH		0x06c
+#define PCIX0_POM0SA		0x070
+#define PCIX0_POM0PCIAL		0x074
+#define PCIX0_POM0PCIAH		0x078
+#define PCIX0_POM1LAL		0x07c
+#define PCIX0_POM1LAH		0x080
+#define PCIX0_POM1SA		0x084
+#define PCIX0_POM1PCIAL		0x088
+#define PCIX0_POM1PCIAH		0x08c
+#define PCIX0_POM2SA		0x090
+#define PCIX0_PIM0SAL		0x098
+#define PCIX0_PIM0SA		PCIX0_PIM0SAL
+#define PCIX0_PIM0LAL		0x09c
+#define PCIX0_PIM0LAH		0x0a0
+#define PCIX0_PIM1SA		0x0a4
+#define PCIX0_PIM1LAL		0x0a8
+#define PCIX0_PIM1LAH		0x0ac
+#define PCIX0_PIM2SAL		0x0b0
+#define PCIX0_PIM2SA		PCIX0_PIM2SAL
+#define PCIX0_PIM2LAL		0x0b4
+#define PCIX0_PIM2LAH		0x0b8
+#define PCIX0_OMCAPID		0x0c0
+#define PCIX0_OMNIPTR		0x0c1
+#define PCIX0_OMMC		0x0c2
+#define PCIX0_OMMA		0x0c4
+#define PCIX0_OMMUA		0x0c8
+#define PCIX0_OMMDATA		0x0cc
+#define PCIX0_OMMEOI		0x0ce
+#define PCIX0_PMCAPID		0x0d0
+#define PCIX0_PMNIPTR		0x0d1
+#define PCIX0_PMC		0x0d2
+#define PCIX0_PMCSR		0x0d4
+#define PCIX0_PMCSRBSE		0x0d6
+#define PCIX0_PMDATA		0x0d7
+#define PCIX0_PMSCRR		0x0d8
+#define PCIX0_CAPID		0x0dc
+#define PCIX0_NIPTR		0x0dd
+#define PCIX0_CMD		0x0de
+#define PCIX0_STS		0x0e0
+#define PCIX0_IDR		0x0e4
+#define PCIX0_CID		0x0e8
+#define PCIX0_RID		0x0ec
+#define PCIX0_PIM0SAH		0x0f8
+#define PCIX0_PIM2SAH		0x0fc
+#define PCIX0_MSGIL		0x100
+#define PCIX0_MSGIH		0x104
+#define PCIX0_MSGOL		0x108
+#define PCIX0_MSGOH		0x10c
+#define PCIX0_IM		0x1f8
+
+#define IIC_OWN			0x55
+#define IIC_CLOCK		50
+
+#undef NR_UICS
+#ifdef CONFIG_440GX
+#define NR_UICS 3
+#else
+#define NR_UICS 2
+#endif
+
+#include <asm/ibm4xx.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_IBM44x_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
new file mode 100644
index 000000000000..35260afa33a9
--- /dev/null
+++ b/include/asm-ppc/ibm4xx.h
@@ -0,0 +1,124 @@
+/*
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ *    Module name: ibm4xx.h
+ *
+ *    Description:
+ *	A generic include file which pulls in appropriate include files
+ *      for specific board types based on configuration settings.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM4XX_H__
+#define __ASM_IBM4XX_H__
+
+#include <linux/config.h>
+#include <asm/types.h>
+
+#ifdef CONFIG_40x
+
+#if defined(CONFIG_ASH)
+#include <platforms/4xx/ash.h>
+#endif
+
+#if defined(CONFIG_BUBINGA)
+#include <platforms/4xx/bubinga.h>
+#endif
+
+#if defined(CONFIG_CPCI405)
+#include <platforms/4xx/cpci405.h>
+#endif
+
+#if defined(CONFIG_EP405)
+#include <platforms/4xx/ep405.h>
+#endif
+
+#if defined(CONFIG_OAK)
+#include <platforms/4xx/oak.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_4)
+#include <platforms/4xx/redwood.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_5)
+#include <platforms/4xx/redwood5.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_6)
+#include <platforms/4xx/redwood6.h>
+#endif
+
+#if defined(CONFIG_SYCAMORE)
+#include <platforms/4xx/sycamore.h>
+#endif
+
+#if defined(CONFIG_WALNUT)
+#include <platforms/4xx/walnut.h>
+#endif
+
+#if defined(CONFIG_XILINX_ML300)
+#include <platforms/4xx/xilinx_ml300.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_40x
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern bd_t __res;
+#endif
+
+void ppc4xx_setup_arch(void);
+void ppc4xx_map_io(void);
+void ppc4xx_init_IRQ(void);
+void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		 unsigned long r6, unsigned long r7);
+#endif
+
+#ifndef PPC4xx_MACHINE_NAME
+#define PPC4xx_MACHINE_NAME	"Unidentified 4xx class"
+#endif
+
+
+/* IO_BASE is for PCI I/O.
+ * ISA not supported, just here to resolve copilation.
+ */
+
+#ifndef _IO_BASE
+#define _IO_BASE	0xe8000000	/* The PCI address window */
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET	0
+#endif
+
+#elif CONFIG_44x
+
+#if defined(CONFIG_EBONY)
+#include <platforms/4xx/ebony.h>
+#endif
+
+#if defined(CONFIG_LUAN)
+#include <platforms/4xx/luan.h>
+#endif
+
+#if defined(CONFIG_OCOTEA)
+#include <platforms/4xx/ocotea.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_40x
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern bd_t __res;
+#endif
+#endif
+#endif /* CONFIG_40x */
+
+#endif /* __ASM_IBM4XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
new file mode 100644
index 000000000000..8c61d93043af
--- /dev/null
+++ b/include/asm-ppc/ibm_ocp.h
@@ -0,0 +1,163 @@
+/*
+ * ibm_ocp.h
+ *
+ *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *          Mipsys - France
+ *
+ *          Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ *          Additional support and port to 2.6 LDM/sysfs by
+ *          Matt Porter <mporter@kernel.crashing.org>
+ *          Copyright 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __IBM_OCP_H__
+#define __IBM_OCP_H__
+
+#include <asm/types.h>
+
+/*
+ * IBM 4xx OCP system information
+ */
+struct ocp_sys_info_data {
+	int	opb_bus_freq;	/* OPB Bus Frequency (Hz) */
+	int	ebc_bus_freq;	/* EBC Bus Frequency (Hz) */
+};
+
+extern struct ocp_sys_info_data ocp_sys_info;
+
+/*
+ * EMAC additional data and sysfs support
+ *
+ * Note about mdio_idx: When you have a zmii, it's usually
+ * not necessary, it covers the case of the 405EP which has
+ * the MDIO lines on EMAC0 only
+ *
+ * Note about phy_map: Per EMAC map of PHY ids which should
+ * be probed by emac_probe. Different EMACs can have
+ * overlapping maps.
+ *
+ * Note, this map uses inverse logic for bits:
+ *  0 - id should be probed
+ *  1 - id should be ignored
+ *
+ * Default value of 0x00000000 - will result in usual
+ * auto-detection logic.
+ *
+ */
+
+struct ocp_func_emac_data {
+	int	rgmii_idx;	/* RGMII device index or -1 */
+	int	rgmii_mux;	/* RGMII input of this EMAC */
+	int	zmii_idx;	/* ZMII device index or -1 */
+	int	zmii_mux;	/* ZMII input of this EMAC */
+	int	mal_idx;	/* MAL device index */
+	int	mal_rx_chan;	/* MAL rx channel number */
+	int	mal_tx_chan;	/* MAL tx channel number */
+	int	wol_irq;	/* WOL interrupt */
+	int	mdio_idx;	/* EMAC idx of MDIO master or -1 */
+	int	tah_idx;	/* TAH device index or -1 */
+	int	jumbo;		/* Jumbo frames capable flag */
+	int	phy_mode;	/* PHY type or configurable mode */
+	u8	mac_addr[6];	/* EMAC mac address */
+	u32	phy_map;	/* EMAC phy map */
+};
+
+/* Sysfs support */
+#define OCP_SYSFS_EMAC_DATA()						\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx)	\
+									\
+void ocp_show_emac_data(struct device *dev)				\
+{									\
+	device_create_file(dev, &dev_attr_emac_zmii_idx);		\
+	device_create_file(dev, &dev_attr_emac_zmii_mux);		\
+	device_create_file(dev, &dev_attr_emac_mal_idx);		\
+	device_create_file(dev, &dev_attr_emac_mal_rx_chan);		\
+	device_create_file(dev, &dev_attr_emac_mal_tx_chan);		\
+	device_create_file(dev, &dev_attr_emac_wol_irq);		\
+	device_create_file(dev, &dev_attr_emac_mdio_idx);		\
+}
+
+#ifdef CONFIG_40x
+/*
+ * Helper function to copy MAC addresses from the bd_t to OCP EMAC
+ * additions.
+ *
+ * The range of EMAC indices (inclusive) to be copied are the arguments.
+ */
+static inline void ibm_ocp_set_emac(int start, int end)
+{
+	int i;
+	struct ocp_def *def;
+
+	/* Copy MAC addresses to EMAC additions */
+	for (i=start; i<=end; i++) {
+		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+		memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+				&__res.bi_enetaddr[i],
+				6);
+	}
+}
+#endif
+
+/*
+ * MAL additional data and sysfs support
+ */
+struct ocp_func_mal_data {
+	int	num_tx_chans;	/* Number of TX channels */
+	int	num_rx_chans;	/* Number of RX channels */
+	int 	txeob_irq;	/* TX End Of Buffer IRQ  */
+	int 	rxeob_irq;	/* RX End Of Buffer IRQ  */
+	int	txde_irq;	/* TX Descriptor Error IRQ */
+	int	rxde_irq;	/* RX Descriptor Error IRQ */
+	int	serr_irq;	/* MAL System Error IRQ    */
+};
+
+#define OCP_SYSFS_MAL_DATA()						\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq)	\
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq)	\
+									\
+void ocp_show_mal_data(struct device *dev)				\
+{									\
+	device_create_file(dev, &dev_attr_mal_num_tx_chans);		\
+	device_create_file(dev, &dev_attr_mal_num_rx_chans);		\
+	device_create_file(dev, &dev_attr_mal_txeob_irq);		\
+	device_create_file(dev, &dev_attr_mal_rxeob_irq);		\
+	device_create_file(dev, &dev_attr_mal_txde_irq);		\
+	device_create_file(dev, &dev_attr_mal_rxde_irq);		\
+	device_create_file(dev, &dev_attr_mal_serr_irq);		\
+}
+
+/*
+ * IIC additional data and sysfs support
+ */
+struct ocp_func_iic_data {
+	int	fast_mode;	/* IIC fast mode enabled */
+};
+
+#define OCP_SYSFS_IIC_DATA()						\
+OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode)	\
+									\
+void ocp_show_iic_data(struct device *dev)				\
+{									\
+	device_create_file(dev, &dev_attr_iic_fast_mode);			\
+}
+#endif /* __IBM_OCP_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp_pci.h b/include/asm-ppc/ibm_ocp_pci.h
new file mode 100644
index 000000000000..a81ab6144358
--- /dev/null
+++ b/include/asm-ppc/ibm_ocp_pci.h
@@ -0,0 +1,32 @@
+/*
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM_OCP_PCI_H__
+#define __ASM_IBM_OCP_PCI_H__
+
+/* PCI 32 */
+
+struct pmm_regs {
+	u32 la;
+	u32 ma;
+	u32 pcila;
+	u32 pciha;
+};
+
+typedef struct pcil0_regs {
+	struct pmm_regs pmm[3];
+	u32 ptm1ms;
+	u32 ptm1la;
+	u32 ptm2ms;
+	u32 ptm2la;
+} pci0_t;
+
+#endif				/* __ASM_IBM_OCP_PCI_H__ */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ide.h b/include/asm-ppc/ide.h
new file mode 100644
index 000000000000..7d6e6599fac4
--- /dev/null
+++ b/include/asm-ppc/ide.h
@@ -0,0 +1,78 @@
+/*
+ *  linux/include/asm-ppc/ide.h
+ *
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors */
+
+/*
+ *  This file contains the ppc architecture specific IDE code.
+ */
+
+#ifndef __ASMPPC_IDE_H
+#define __ASMPPC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/sched.h>
+#include <asm/mpc8xx.h>
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	8
+#endif
+
+#include <linux/config.h>
+#include <linux/hdreg.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+extern void __ide_mm_insw(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_outsw(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_insl(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_outsl(void __iomem *port, void *addr, u32 count);
+
+struct ide_machdep_calls {
+        int         (*default_irq)(unsigned long base);
+        unsigned long (*default_io_base)(int index);
+        void        (*ide_init_hwif)(hw_regs_t *hw,
+                                     unsigned long data_port,
+                                     unsigned long ctrl_port,
+                                     int *irq);
+};
+
+extern struct ide_machdep_calls ppc_ide_md;
+
+#undef	SUPPORT_SLOW_DATA_PORTS
+#define	SUPPORT_SLOW_DATA_PORTS	0
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static __inline__ int ide_default_irq(unsigned long base)
+{
+	if (ppc_ide_md.default_irq)
+		return ppc_ide_md.default_irq(base);
+	return 0;
+}
+
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+	if (ppc_ide_md.default_io_base)
+		return ppc_ide_md.default_io_base(index);
+	return 0;
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE )
+#define IDE_ARCH_ACK_INTR  1
+#define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMPPC_IDE_H */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
new file mode 100644
index 000000000000..50fb5e47094a
--- /dev/null
+++ b/include/asm-ppc/immap_85xx.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-ppc/immap_85xx.h
+ *
+ * MPC85xx Internal Memory Map
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IMMAP_85XX_H__
+#define __ASM_IMMAP_85XX_H__
+
+/* Eventually this should define all the IO block registers in 85xx */
+
+/* PCI Registers */
+typedef struct ccsr_pci {
+	uint	cfg_addr;	/* 0x.000 - PCI Configuration Address Register */
+	uint	cfg_data;	/* 0x.004 - PCI Configuration Data Register */
+	uint	int_ack;	/* 0x.008 - PCI Interrupt Acknowledge Register */
+	char	res1[3060];
+	uint	potar0;		/* 0x.c00 - PCI Outbound Transaction Address Register 0 */
+	uint	potear0;	/* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */
+	uint	powbar0;	/* 0x.c08 - PCI Outbound Window Base Address Register 0 */
+	char	res2[4];
+	uint	powar0;		/* 0x.c10 - PCI Outbound Window Attributes Register 0 */
+	char	res3[12];
+	uint	potar1;		/* 0x.c20 - PCI Outbound Transaction Address Register 1 */
+	uint	potear1;	/* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */
+	uint	powbar1;	/* 0x.c28 - PCI Outbound Window Base Address Register 1 */
+	char	res4[4];
+	uint	powar1;		/* 0x.c30 - PCI Outbound Window Attributes Register 1 */
+	char	res5[12];
+	uint	potar2;		/* 0x.c40 - PCI Outbound Transaction Address Register 2 */
+	uint	potear2;	/* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */
+	uint	powbar2;	/* 0x.c48 - PCI Outbound Window Base Address Register 2 */
+	char	res6[4];
+	uint	powar2;		/* 0x.c50 - PCI Outbound Window Attributes Register 2 */
+	char	res7[12];
+	uint	potar3;		/* 0x.c60 - PCI Outbound Transaction Address Register 3 */
+	uint	potear3;	/* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */
+	uint	powbar3;	/* 0x.c68 - PCI Outbound Window Base Address Register 3 */
+	char	res8[4];
+	uint	powar3;		/* 0x.c70 - PCI Outbound Window Attributes Register 3 */
+	char	res9[12];
+	uint	potar4;		/* 0x.c80 - PCI Outbound Transaction Address Register 4 */
+	uint	potear4;	/* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */
+	uint	powbar4;	/* 0x.c88 - PCI Outbound Window Base Address Register 4 */
+	char	res10[4];
+	uint	powar4;		/* 0x.c90 - PCI Outbound Window Attributes Register 4 */
+	char	res11[268];
+	uint	pitar3;		/* 0x.da0 - PCI Inbound Translation Address Register 3  */
+	char	res12[4];
+	uint	piwbar3;	/* 0x.da8 - PCI Inbound Window Base Address Register 3 */
+	uint	piwbear3;	/* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */
+	uint	piwar3;		/* 0x.db0 - PCI Inbound Window Attributes Register 3 */
+	char	res13[12];
+	uint	pitar2;		/* 0x.dc0 - PCI Inbound Translation Address Register 2  */
+	char	res14[4];
+	uint	piwbar2;	/* 0x.dc8 - PCI Inbound Window Base Address Register 2 */
+	uint	piwbear2;	/* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */
+	uint	piwar2;		/* 0x.dd0 - PCI Inbound Window Attributes Register 2 */
+	char	res15[12];
+	uint	pitar1;		/* 0x.de0 - PCI Inbound Translation Address Register 1  */
+	char	res16[4];
+	uint	piwbar1;	/* 0x.de8 - PCI Inbound Window Base Address Register 1 */
+	char	res17[4];
+	uint	piwar1;		/* 0x.df0 - PCI Inbound Window Attributes Register 1 */
+	char	res18[12];
+	uint	err_dr;		/* 0x.e00 - PCI Error Detect Register */
+	uint	err_cap_dr;	/* 0x.e04 - PCI Error Capture Disable Register */
+	uint	err_en;		/* 0x.e08 - PCI Error Enable Register */
+	uint	err_attrib;	/* 0x.e0c - PCI Error Attributes Capture Register */
+	uint	err_addr;	/* 0x.e10 - PCI Error Address Capture Register */
+	uint	err_ext_addr;	/* 0x.e14 - PCI Error Extended Address Capture Register */
+	uint	err_dl;		/* 0x.e18 - PCI Error Data Low Capture Register */
+	uint	err_dh;		/* 0x.e1c - PCI Error Data High Capture Register */
+	uint	gas_timr;	/* 0x.e20 - PCI Gasket Timer Register */
+	uint	pci_timr;	/* 0x.e24 - PCI Timer Register */
+	char	res19[472];
+} ccsr_pci_t;
+
+/* Global Utility Registers */
+typedef struct ccsr_guts {
+	uint	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	uint	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	uint	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	uint	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	uint	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	char	res1[12];
+	uint	gpporcr;	/* 0x.0020 - General-Purpose POR Configuration Register */
+	char	res2[12];
+	uint	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	char	res3[12];
+	uint	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	char	res4[12];
+	uint	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	char	res5[12];
+	uint	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+	char	res6[12];
+	uint	devdisr;	/* 0x.0070 - Device Disable Control */
+	char	res7[12];
+	uint	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	char	res8[12];
+	uint	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	char	res9[12];
+	uint	pvr;		/* 0x.00a0 - Processor Version Register */
+	uint	svr;		/* 0x.00a4 - System Version Register */
+	char	res10[3416];
+	uint	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	char	res11[12];
+	uint	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	char	res12[12];
+	uint	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	char	res13[61916];
+} ccsr_guts_t;
+
+#endif /* __ASM_IMMAP_85XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/immap_cpm2.h b/include/asm-ppc/immap_cpm2.h
new file mode 100644
index 000000000000..3c23d9cb47a6
--- /dev/null
+++ b/include/asm-ppc/immap_cpm2.h
@@ -0,0 +1,648 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them.  This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560). 
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+/* System configuration registers.
+*/
+typedef	struct sys_82xx_conf {
+	u32	sc_siumcr;
+	u32	sc_sypcr;
+	u8	res1[6];
+	u16	sc_swsr;
+	u8	res2[20];
+	u32	sc_bcr;
+	u8	sc_ppc_acr;
+	u8	res3[3];
+	u32	sc_ppc_alrh;
+	u32	sc_ppc_alrl;
+	u8	sc_lcl_acr;
+	u8	res4[3];
+	u32	sc_lcl_alrh;
+	u32	sc_lcl_alrl;
+	u32	sc_tescr1;
+	u32	sc_tescr2;
+	u32	sc_ltescr1;
+	u32	sc_ltescr2;
+	u32	sc_pdtea;
+	u8	sc_pdtem;
+	u8	res5[3];
+	u32	sc_ldtea;
+	u8	sc_ldtem;
+	u8	res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef	struct sys_85xx_conf {
+	u32	sc_cear;
+	u16	sc_ceer;
+	u16	sc_cemr;
+	u8	res1[70];
+	u32	sc_smaer;
+	u8	res2[4];
+	u32	sc_smevr;
+	u32	sc_smctr;
+	u32	sc_lmaer;
+	u8	res3[4];
+	u32	sc_lmevr;
+	u32	sc_lmctr;
+	u8	res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+	sysconf_82xx_cpm2_t	siu_82xx;
+	sysconf_85xx_cpm2_t	siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	u32	memc_br0;
+	u32	memc_or0;
+	u32	memc_br1;
+	u32	memc_or1;
+	u32	memc_br2;
+	u32	memc_or2;
+	u32	memc_br3;
+	u32	memc_or3;
+	u32	memc_br4;
+	u32	memc_or4;
+	u32	memc_br5;
+	u32	memc_or5;
+	u32	memc_br6;
+	u32	memc_or6;
+	u32	memc_br7;
+	u32	memc_or7;
+	u32	memc_br8;
+	u32	memc_or8;
+	u32	memc_br9;
+	u32	memc_or9;
+	u32	memc_br10;
+	u32	memc_or10;
+	u32	memc_br11;
+	u32	memc_or11;
+	u8	res1[8];
+	u32	memc_mar;
+	u8	res2[4];
+	u32	memc_mamr;
+	u32	memc_mbmr;
+	u32	memc_mcmr;
+	u8	res3[8];
+	u16	memc_mptpr;
+	u8	res4[2];
+	u32	memc_mdr;
+	u8	res5[4];
+	u32	memc_psdmr;
+	u32	memc_lsdmr;
+	u8	memc_purt;
+	u8	res6[3];
+	u8	memc_psrt;
+	u8	res7[3];
+	u8	memc_lurt;
+	u8	res8[3];
+	u8	memc_lsrt;
+	u8	res9[3];
+	u32	memc_immr;
+	u32	memc_pcibr0;
+	u32	memc_pcibr1;
+	u8	res10[16];
+	u32	memc_pcimsk0;
+	u32	memc_pcimsk1;
+	u8	res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	u8	res1[32];
+	u16	sit_tmcntsc;
+	u8	res2[2];
+	u32	sit_tmcnt;
+	u8	res3[4];
+	u32	sit_tmcntal;
+	u8	res4[16];
+	u16	sit_piscr;
+	u8	res5[2];
+	u32	sit_pitc;
+	u32	sit_pitr;
+	u8      res6[94];
+	u8	res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK		((u16)0xff00)
+#define PISCR_PS		((u16)0x0080)
+#define PISCR_PIE		((u16)0x0004)
+#define PISCR_PTF		((u16)0x0002)
+#define PISCR_PTE		((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+	u32	pci_omisr;
+	u32	pci_omimr;
+	u8	res1[8];
+	u32	pci_ifqpr;
+	u32	pci_ofqpr;
+	u8	res2[8];
+	u32	pci_imr0;
+	u32	pci_imr1;
+	u32	pci_omr0;
+	u32	pci_omr1;
+	u32	pci_odr;
+	u8	res3[4];
+	u32	pci_idr;
+	u8	res4[20];
+	u32	pci_imisr;
+	u32	pci_imimr;
+	u8	res5[24];
+	u32	pci_ifhpr;
+	u8	res6[4];
+	u32	pci_iftpr;
+	u8	res7[4];
+	u32	pci_iphpr;
+	u8	res8[4];
+	u32	pci_iptpr;
+	u8	res9[4];
+	u32	pci_ofhpr;
+	u8	res10[4];
+	u32	pci_oftpr;
+	u8	res11[4];
+	u32	pci_ophpr;
+	u8	res12[4];
+	u32	pci_optpr;
+	u8	res13[8];
+	u32	pci_mucr;
+	u8	res14[8];
+	u32	pci_qbar;
+	u8	res15[12];
+	u32	pci_dmamr0;
+	u32	pci_dmasr0;
+	u32	pci_dmacdar0;
+	u8	res16[4];
+	u32	pci_dmasar0;
+	u8	res17[4];
+	u32	pci_dmadar0;
+	u8	res18[4];
+	u32	pci_dmabcr0;
+	u32	pci_dmandar0;
+	u8	res19[86];
+	u32	pci_dmamr1;
+	u32	pci_dmasr1;
+	u32	pci_dmacdar1;
+	u8	res20[4];
+	u32	pci_dmasar1;
+	u8	res21[4];
+	u32	pci_dmadar1;
+	u8	res22[4];
+	u32	pci_dmabcr1;
+	u32	pci_dmandar1;
+	u8	res23[88];
+	u32	pci_dmamr2;
+	u32	pci_dmasr2;
+	u32	pci_dmacdar2;
+	u8	res24[4];
+	u32	pci_dmasar2;
+	u8	res25[4];
+	u32	pci_dmadar2;
+	u8	res26[4];
+	u32	pci_dmabcr2;
+	u32	pci_dmandar2;
+	u8	res27[88];
+	u32	pci_dmamr3;
+	u32	pci_dmasr3;
+	u32	pci_dmacdar3;
+	u8	res28[4];
+	u32	pci_dmasar3;
+	u8	res29[4];
+	u32	pci_dmadar3;
+	u8	res30[4];
+	u32	pci_dmabcr3;
+	u32	pci_dmandar3;
+	u8	res31[344];
+	u32	pci_potar0;
+	u8	res32[4];
+	u32	pci_pobar0;
+	u8	res33[4];
+	u32	pci_pocmr0;
+	u8	res34[4];
+	u32	pci_potar1;
+	u8	res35[4];
+	u32	pci_pobar1;
+	u8	res36[4];
+	u32	pci_pocmr1;
+	u8	res37[4];
+	u32	pci_potar2;
+	u8	res38[4];
+	u32	pci_pobar2;
+	u8	res39[4];
+	u32	pci_pocmr2;
+	u8	res40[50];
+	u32	pci_ptcr;
+	u32	pci_gpcr;
+	u32	pci_gcr;
+	u32	pci_esr;
+	u32	pci_emr;
+	u32	pci_ecr;
+	u32	pci_eacr;
+	u8	res41[4];
+	u32	pci_edcr;
+	u8	res42[4];
+	u32	pci_eccr;
+	u8	res43[44];
+	u32	pci_pitar1;
+	u8	res44[4];
+	u32	pci_pibar1;
+	u8	res45[4];
+	u32	pci_picmr1;
+	u8	res46[4];
+	u32	pci_pitar0;
+	u8	res47[4];
+	u32	pci_pibar0;
+	u8	res48[4];
+	u32	pci_picmr0;
+	u8	res49[4];
+	u32	pci_cfg_addr;
+	u32	pci_cfg_data;
+	u32	pci_int_ack;
+	u8	res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+	u16	ic_sicr;
+	u8	res1[2];
+	u32	ic_sivec;
+	u32	ic_sipnrh;
+	u32	ic_sipnrl;
+	u32	ic_siprr;
+	u32	ic_scprrh;
+	u32	ic_scprrl;
+	u32	ic_simrh;
+	u32	ic_simrl;
+	u32	ic_siexr;
+	u8	res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	u32	car_sccr;
+	u8	res1[4];
+	u32	car_scmr;
+	u8	res2[4];
+	u32	car_rsr;
+	u32	car_rmr;
+	u8	res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+	u32	iop_pdira;
+	u32	iop_ppara;
+	u32	iop_psora;
+	u32	iop_podra;
+	u32	iop_pdata;
+	u8	res1[12];
+	u32	iop_pdirb;
+	u32	iop_pparb;
+	u32	iop_psorb;
+	u32	iop_podrb;
+	u32	iop_pdatb;
+	u8	res2[12];
+	u32	iop_pdirc;
+	u32	iop_pparc;
+	u32	iop_psorc;
+	u32	iop_podrc;
+	u32	iop_pdatc;
+	u8	res3[12];
+	u32	iop_pdird;
+	u32	iop_ppard;
+	u32	iop_psord;
+	u32	iop_podrd;
+	u32	iop_pdatd;
+	u8	res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	u8	cpmt_tgcr1;
+	u8	res1[3];
+	u8	cpmt_tgcr2;
+	u8	res2[11];
+	u16	cpmt_tmr1;
+	u16	cpmt_tmr2;
+	u16	cpmt_trr1;
+	u16	cpmt_trr2;
+	u16	cpmt_tcr1;
+	u16	cpmt_tcr2;
+	u16	cpmt_tcn1;
+	u16	cpmt_tcn2;
+	u16	cpmt_tmr3;
+	u16	cpmt_tmr4;
+	u16	cpmt_trr3;
+	u16	cpmt_trr4;
+	u16	cpmt_tcr3;
+	u16	cpmt_tcr4;
+	u16	cpmt_tcn3;
+	u16	cpmt_tcn4;
+	u16	cpmt_ter1;
+	u16	cpmt_ter2;
+	u16	cpmt_ter3;
+	u16	cpmt_ter4;
+	u8	res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	u8	res0[24];
+	u8	sdma_sdsr;
+	u8	res1[3];
+	u8	sdma_sdmr;
+	u8	res2[3];
+	u8	sdma_idsr1;
+	u8	res3[3];
+	u8	sdma_idmr1;
+	u8	res4[3];
+	u8	sdma_idsr2;
+	u8	res5[3];
+	u8	sdma_idmr2;
+	u8	res6[3];
+	u8	sdma_idsr3;
+	u8	res7[3];
+	u8	sdma_idmr3;
+	u8	res8[3];
+	u8	sdma_idsr4;
+	u8	res9[3];
+	u8	sdma_idmr4;
+	u8	res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+	u32	fcc_gfmr;
+	u32	fcc_fpsmr;
+	u16	fcc_ftodr;
+	u8	res1[2];
+	u16	fcc_fdsr;
+	u8	res2[2];
+	u16	fcc_fcce;
+	u8	res3[2];
+	u16	fcc_fccm;
+	u8	res4[2];
+	u8	fcc_fccs;
+	u8	res5[3];
+	u8	fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+	u32	fcc_firper;
+	u32	fcc_firer;
+	u32	fcc_firsr_hi;
+	u32	fcc_firsr_lo;
+	u8	fcc_gfemr;
+	u8	res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+	u16	tc_tcmode;
+	u16	tc_cdsmr;
+	u16	tc_tcer;
+	u16	tc_rcc;
+	u16	tc_tcmr;
+	u16	tc_fcc;
+	u16	tc_ccc;
+	u16	tc_icc;
+	u16	tc_tcc;
+	u16	tc_ecc;
+	u8	res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+	u8	i2c_i2mod;
+	u8	res1[3];
+	u8	i2c_i2add;
+	u8	res2[3];
+	u8	i2c_i2brg;
+	u8	res3[3];
+	u8	i2c_i2com;
+	u8	res4[3];
+	u8	i2c_i2cer;
+	u8	res5[3];
+	u8	i2c_i2cmr;
+	u8	res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc {		/* Serial communication channels */
+	u32	scc_gsmrl;
+	u32	scc_gsmrh;
+	u16	scc_psmr;
+	u8	res1[2];
+	u16	scc_todr;
+	u16	scc_dsr;
+	u16	scc_scce;
+	u8	res2[2];
+	u16	scc_sccm;
+	u8	res3;
+	u8	scc_sccs;
+	u8	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	u8	res1[2];
+	u16	smc_smcmr;
+	u8	res2[2];
+	u8	smc_smce;
+	u8	res3[3];
+	u8	smc_smcm;
+	u8	res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+	u16	spi_spmode;
+	u8	res1[4];
+	u8	spi_spie;
+	u8	res2[3];
+	u8	spi_spim;
+	u8	res3[2];
+	u8	spi_spcom;
+	u8	res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+	u8	cmx_si1cr;
+	u8	res1;
+	u8	cmx_si2cr;
+	u8	res2;
+	u32	cmx_fcr;
+	u32	cmx_scr;
+	u8	cmx_smr;
+	u8	res3;
+	u16	cmx_uar;
+	u8	res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+	u16	si_amr;
+	u16	si_bmr;
+	u16	si_cmr;
+	u16	si_dmr;
+	u8	si_gmr;
+	u8	res1;
+	u8	si_cmdr;
+	u8	res2;
+	u8	si_str;
+	u8	res3;
+	u16	si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+	u16	mcc_mcce;
+	u8	res1[2];
+	u16	mcc_mccm;
+	u8	res2[2];
+	u8	mcc_mccf;
+	u8	res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+	u32	cp_cpcr;
+	u32	cp_rccr;
+	u8	res1[14];
+	u16	cp_rter;
+	u8	res2[2];
+	u16	cp_rtmr;
+	u16	cp_rtscr;
+	u8	res3[2];
+	u32	cp_rtsr;
+	u8	res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	u16	usb_usep1;
+	u16	usb_usep2;
+	u16	usb_usep3;
+	u16	usb_usep4;
+	u8	res2[4];
+	u16	usb_usber;
+	u8	res3[2];
+	u16	usb_usbmr;
+	u8	usb_usbs;
+	u8	res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+	/* Some references are into the unique and known dpram spaces,
+	 * others are from the generic base.
+	 */
+#define im_dprambase	im_dpram1
+	u8		im_dpram1[16*1024];
+	u8		res1[16*1024];
+	u8		im_dpram2[4*1024];
+	u8		res2[8*1024];
+	u8		im_dpram3[4*1024];
+	u8		res3[16*1024];
+
+	sysconf_cpm2_t	im_siu_conf;	/* SIU Configuration */
+	memctl_cpm2_t	im_memctl;	/* Memory Controller */
+	sit_cpm2_t	im_sit;		/* System Integration Timers */
+	pci_cpm2_t	im_pci;		/* PCI Controller */
+	intctl_cpm2_t	im_intctl;	/* Interrupt Controller */
+	car_cpm2_t	im_clkrst;	/* Clocks and reset */
+	iop_cpm2_t	im_ioport;	/* IO Port control/status */
+	cpmtimer_cpm2_t	im_cpmtimer;	/* CPM timers */
+	sdma_cpm2_t	im_sdma;	/* SDMA control/status */
+
+	fcc_t		im_fcc[3];	/* Three FCCs */
+	u8		res4z[32];
+	fcc_c_t		im_fcc_c[3];	/* Continued FCCs */
+
+	u8		res4[32];
+
+	tclayer_t	im_tclayer[8];	/* Eight TCLayers */
+	u16		tc_tcgsr;
+	u16		tc_tcger;
+	
+	/* First set of baud rate generators.
+	*/
+	u8		res[236];
+	u32		im_brgc5;
+	u32		im_brgc6;
+	u32		im_brgc7;
+	u32		im_brgc8;
+
+	u8		res5[608];
+
+	i2c_cpm2_t	im_i2c;		/* I2C control/status */
+	cpm_cpm2_t	im_cpm;		/* Communication processor */
+
+	/* Second set of baud rate generators.
+	*/
+	u32		im_brgc1;
+	u32		im_brgc2;
+	u32		im_brgc3;
+	u32		im_brgc4;
+
+	scc_t		im_scc[4];	/* Four SCCs */
+	smc_t		im_smc[2];	/* Couple of SMCs */
+	spictl_cpm2_t	im_spi;		/* A SPI */
+	cpmux_t		im_cpmux;	/* CPM clock route mux */
+	siramctl_t	im_siramctl1;	/* First SI RAM Control */
+	mcc_t		im_mcc1;	/* First MCC */
+	siramctl_t	im_siramctl2;	/* Second SI RAM Control */
+	mcc_t		im_mcc2;	/* Second MCC */
+	usb_cpm2_t	im_usb;		/* USB Controller */
+
+	u8		res6[1153];
+
+	u16		im_si1txram[256];
+	u8		res7[512];
+	u16		im_si1rxram[256];
+	u8		res8[512];
+	u16		im_si2txram[256];
+	u8		res9[512];
+	u16		im_si2rxram[256];
+	u8		res10[512];
+	u8		res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t	*cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
new file mode 100644
index 000000000000..7eb7cf6360bd
--- /dev/null
+++ b/include/asm-ppc/io.h
@@ -0,0 +1,566 @@
+#ifdef __KERNEL__
+#ifndef _PPC_IO_H
+#define _PPC_IO_H
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/mmu.h>
+
+#define SIO_CONFIG_RA	0x398
+#define SIO_CONFIG_RD	0x399
+
+#define SLOW_DOWN_IO
+
+#define PMAC_ISA_MEM_BASE 	0
+#define PMAC_PCI_DRAM_OFFSET 	0
+#define CHRP_ISA_IO_BASE 	0xf8000000
+#define CHRP_ISA_MEM_BASE 	0xf7000000
+#define CHRP_PCI_DRAM_OFFSET 	0
+#define PREP_ISA_IO_BASE 	0x80000000
+#define PREP_ISA_MEM_BASE 	0xc0000000
+#define PREP_PCI_DRAM_OFFSET 	0x80000000
+
+#if defined(CONFIG_4xx)
+#include <asm/ibm4xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
+#elif defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_APUS)
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET 0
+#else /* Everyone else */
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#endif /* Platform-dependent I/O */
+
+#define ___IO_BASE ((void __iomem *)_IO_BASE)
+extern unsigned long isa_io_base;
+extern unsigned long isa_mem_base;
+extern unsigned long pci_dram_offset;
+
+/*
+ * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
+ */
+extern inline int in_8(volatile unsigned char __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__(
+		"lbz%U1%X1 %0,%1;\n"
+		"twi 0,%0,0;\n"
+		"isync" : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
+{
+	__asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline int in_le16(volatile unsigned short __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__("lhbrx %0,0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) :
+			      "r" (addr), "m" (*addr));
+	return ret;
+}
+
+extern inline int in_be16(volatile unsigned short __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__("lhz%U1%X1 %0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
+{
+	__asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
+			      "r" (val), "r" (addr));
+}
+
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
+{
+	__asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline unsigned in_le32(volatile unsigned __iomem *addr)
+{
+	unsigned ret;
+
+	__asm__ __volatile__("lwbrx %0,0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) :
+			     "r" (addr), "m" (*addr));
+	return ret;
+}
+
+extern inline unsigned in_be32(volatile unsigned __iomem *addr)
+{
+	unsigned ret;
+
+	__asm__ __volatile__("lwz%U1%X1 %0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
+{
+	__asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
+			     "r" (val), "r" (addr));
+}
+
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
+{
+	__asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+#if defined (CONFIG_8260_PCI9)
+#define readb(addr) in_8((volatile u8 *)(addr))
+#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
+#else
+static inline __u8 readb(volatile void __iomem *addr)
+{
+	return in_8(addr);
+}
+static inline void writeb(__u8 b, volatile void __iomem *addr)
+{
+	out_8(addr, b);
+}
+#endif
+
+#if defined(CONFIG_APUS)
+static inline __u16 readw(volatile void __iomem *addr)
+{
+	return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+	return *(__force volatile __u32 *)(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u16 *)(addr) = b;
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u32 *)(addr) = b;
+}
+#elif defined (CONFIG_8260_PCI9)
+/* Use macros if PCI9 workaround enabled */
+#define readw(addr) in_le16((volatile u16 *)(addr))
+#define readl(addr) in_le32((volatile u32 *)(addr))
+#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
+#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
+#else
+static inline __u16 readw(volatile void __iomem *addr)
+{
+	return in_le16(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+	return in_le32(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+	out_le16(addr, b);
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+	out_le32(addr, b);
+}
+#endif /* CONFIG_APUS */
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+static inline __u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u8 *)(addr);
+}
+static inline __u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u32 *)(addr);
+}
+static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u8 *)(addr) = b;
+}
+static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u16 *)(addr) = b;
+}
+static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u32 *)(addr) = b;
+}
+
+#define mmiowb()
+
+/*
+ * The insw/outsw/insl/outsl macros don't do byte-swapping.
+ * They are only used in practice for transferring buffers which
+ * are arrays of bytes, and byte-swapping is not appropriate in
+ * that case.  - paulus
+ */
+#define insb(port, buf, ns)	_insb((port)+___IO_BASE, (buf), (ns))
+#define outsb(port, buf, ns)	_outsb((port)+___IO_BASE, (buf), (ns))
+#define insw(port, buf, ns)	_insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw(port, buf, ns)	_outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl(port, buf, nl)	_insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl(port, buf, nl)	_outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+/*
+ * On powermacs, we will get a machine check exception if we
+ * try to read data from a non-existent I/O port.  Because the
+ * machine check is an asynchronous exception, it isn't
+ * well-defined which instruction SRR0 will point to when the
+ * exception occurs.
+ * With the sequence below (twi; isync; nop), we have found that
+ * the machine check occurs on one of the three instructions on
+ * all PPC implementations tested so far.  The twi and isync are
+ * needed on the 601 (in fact twi; sync works too), the isync and
+ * nop are needed on 604[e|r], and any of twi, sync or isync will
+ * work on 603[e], 750, 74xx.
+ * The twi creates an explicit data dependency on the returned
+ * value which seems to be needed to make the 601 wait for the
+ * load to finish.
+ */
+
+#define __do_in_asm(name, op)				\
+extern __inline__ unsigned int name(unsigned int port)	\
+{							\
+	unsigned int x;					\
+	__asm__ __volatile__(				\
+			op "	%0,0,%1\n"		\
+		"1:	twi	0,%0,0\n"		\
+		"2:	isync\n"			\
+		"3:	nop\n"				\
+		"4:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"5:	li	%0,-1\n"		\
+		"	b	4b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	1b,5b\n"		\
+		"	.long	2b,5b\n"		\
+		"	.long	3b,5b\n"		\
+		".previous"				\
+		: "=&r" (x)				\
+		: "r" (port + ___IO_BASE));		\
+	return x;					\
+}
+
+#define __do_out_asm(name, op)				\
+extern __inline__ void name(unsigned int val, unsigned int port) \
+{							\
+	__asm__ __volatile__(				\
+		op " %0,0,%1\n"				\
+		"1:	sync\n"				\
+		"2:\n"					\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	1b,2b\n"		\
+		".previous"				\
+		: : "r" (val), "r" (port + ___IO_BASE));	\
+}
+
+__do_out_asm(outb, "stbx")
+#ifdef CONFIG_APUS
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhz%U1%X1")
+__do_in_asm(inl, "lwz%U1%X1")
+__do_out_asm(outl,"stw%U0%X0")
+__do_out_asm(outw, "sth%U0%X0")
+#elif defined (CONFIG_8260_PCI9)
+/* in asm cannot be defined if PCI9 workaround is used */
+#define inb(port)		in_8((port)+___IO_BASE)
+#define inw(port)		in_le16((port)+___IO_BASE)
+#define inl(port)		in_le32((port)+___IO_BASE)
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+#else
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhbrx")
+__do_in_asm(inl, "lwbrx")
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+
+#endif
+
+#define inb_p(port)		inb((port))
+#define outb_p(val, port)	outb((val), (port))
+#define inw_p(port)		inw((port))
+#define outw_p(val, port)	outw((val), (port))
+#define inl_p(port)		inl((port))
+#define outl_p(val, port)	outl((val), (port))
+
+extern void _insb(volatile u8 __iomem *port, void *buf, int ns);
+extern void _outsb(volatile u8 __iomem *port, const void *buf, int ns);
+extern void _insw(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl(volatile u32 __iomem *port, const void *buf, int nl);
+extern void _insw_ns(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
+
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define insw_ns(port, buf, ns)	_insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw_ns(port, buf, ns)	_outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl_ns(port, buf, nl)	_insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl_ns(port, buf, nl)	_outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+
+#define IO_SPACE_LIMIT ~0
+
+#if defined (CONFIG_8260_PCI9)
+#define memset_io(a,b,c)       memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)   memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)     memcpy((void *)(a),(b),(c))
+#else
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *)addr, val, count);
+}
+static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+#endif
+
+#define eth_io_copy_and_sum(a,b,c,d)		eth_copy_and_sum((a),(void __force *)(void __iomem *)(b),(c),(d))
+
+/*
+ * Map in an area of physical address space, for accessing
+ * I/O devices etc.
+ */
+extern void __iomem *__ioremap(phys_addr_t address, unsigned long size,
+		       unsigned long flags);
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#ifdef CONFIG_44x
+extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
+#endif
+#define ioremap_nocache(addr, size)	ioremap((addr), (size))
+extern void iounmap(volatile void __iomem *addr);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags);
+
+/*
+ * The PCI bus is inherently Little-Endian.  The PowerPC is being
+ * run Big-Endian.  Thus all values which cross the [PCI] barrier
+ * must be endian-adjusted.  Also, the local DRAM has a different
+ * address from the PCI point of view, thus buffer addresses also
+ * have to be modified [mapped] appropriately.
+ */
+extern inline unsigned long virt_to_bus(volatile void * address)
+{
+#ifndef CONFIG_APUS
+        if (address == (void *)0)
+		return 0;
+        return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
+#else
+	return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * bus_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+        if (address == 0)
+		return NULL;
+        return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
+#else
+	return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv, for
+ * addresses in the area where the kernel has the RAM mapped.
+ */
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+#ifndef CONFIG_APUS
+	return (unsigned long) address - KERNELBASE;
+#else
+	return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+	return (void *) (address + KERNELBASE);
+#else
+	return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
+
+/*
+ * Enforce In-order Execution of I/O:
+ * Acts as a barrier to ensure all previous I/O accesses have
+ * completed before any further ones are issued.
+ */
+extern inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+static inline int check_signature(volatile void __iomem * io_addr,
+	const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/*
+ * Here comes the ppc implementation of the IOMAP 
+ * interfaces.
+ */
+static inline unsigned int ioread8(void __iomem *addr)
+{
+	return readb(addr);
+}
+
+static inline unsigned int ioread16(void __iomem *addr)
+{
+	return readw(addr);
+}
+
+static inline unsigned int ioread32(void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void iowrite8(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+
+static inline void iowrite16(u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+
+static inline void iowrite32(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	_insb(addr, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	_insw_ns(addr, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	_insl_ns(addr, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	_outsb(addr, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	_outsw_ns(addr, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	_outsl_ns(addr, src, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+#endif /* _PPC_IO_H */
+
+#ifdef CONFIG_8260_PCI9
+#include <asm/mpc8260_pci9.h>
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ioctl.h b/include/asm-ppc/ioctl.h
new file mode 100644
index 000000000000..93c6acfdd0fd
--- /dev/null
+++ b/include/asm-ppc/ioctl.h
@@ -0,0 +1,69 @@
+#ifndef _PPC_IOCTL_H
+#define _PPC_IOCTL_H
+
+
+/*
+ * this was copied from the alpha as it's a bit cleaner there.
+ *                         -- Cort
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* various drivers, such as the pcmcia stuff, need these... */
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif
diff --git a/include/asm-ppc/ioctls.h b/include/asm-ppc/ioctls.h
new file mode 100644
index 000000000000..f5b7f2b055e7
--- /dev/null
+++ b/include/asm-ppc/ioctls.h
@@ -0,0 +1,107 @@
+#ifndef _ASM_PPC_IOCTLS_H
+#define _ASM_PPC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* _ASM_PPC_IOCTLS_H */
diff --git a/include/asm-ppc/ipc.h b/include/asm-ppc/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-ppc/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-ppc/ipcbuf.h b/include/asm-ppc/ipcbuf.h
new file mode 100644
index 000000000000..fab6752c7480
--- /dev/null
+++ b/include/asm-ppc/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __PPC_IPCBUF_H__
+#define __PPC_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for PPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 1 32-bit value to fill up for 8-byte alignment
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *                                  PPC64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid_t		uid;
+	__kernel_gid_t		gid;
+	__kernel_uid_t		cuid;
+	__kernel_gid_t		cgid;
+	__kernel_mode_t		mode;
+	unsigned long		seq;
+	unsigned int		__pad2;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
+};
+
+#endif /* __PPC_IPCBUF_H__ */
diff --git a/include/asm-ppc/ipic.h b/include/asm-ppc/ipic.h
new file mode 100644
index 000000000000..9092b920997a
--- /dev/null
+++ b/include/asm-ppc/ipic.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-ppc/ipic.h
+ *
+ * IPIC external definitions and structure.
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_IPIC_H__
+#define __ASM_IPIC_H__
+
+#include <linux/irq.h>
+
+/* Flags when we init the IPIC */
+#define IPIC_SPREADMODE_GRP_A	0x00000001
+#define IPIC_SPREADMODE_GRP_D	0x00000002
+#define IPIC_SPREADMODE_MIX_A	0x00000004
+#define IPIC_SPREADMODE_MIX_B	0x00000008
+#define IPIC_DISABLE_MCP_OUT	0x00000010
+#define IPIC_IRQ0_MCP		0x00000020
+
+/* IPIC registers offsets */
+#define IPIC_SICFR	0x00	/* System Global Interrupt Configuration Register */
+#define IPIC_SIVCR	0x04	/* System Global Interrupt Vector Register */
+#define IPIC_SIPNR_H	0x08	/* System Internal Interrupt Pending Register (HIGH) */
+#define IPIC_SIPNR_L	0x0C	/* System Internal Interrupt Pending Register (LOW) */
+#define IPIC_SIPRR_A	0x10	/* System Internal Interrupt group A Priority Register */
+#define IPIC_SIPRR_B	0x14	/* System Internal Interrupt group B Priority Register */
+#define IPIC_SIPRR_C	0x18	/* System Internal Interrupt group C Priority Register */
+#define IPIC_SIPRR_D	0x1C	/* System Internal Interrupt group D Priority Register */
+#define IPIC_SIMSR_H	0x20	/* System Internal Interrupt Mask Register (HIGH) */
+#define IPIC_SIMSR_L	0x24	/* System Internal Interrupt Mask Register (LOW) */
+#define IPIC_SICNR	0x28	/* System Internal Interrupt Control Register */
+#define IPIC_SEPNR	0x2C	/* System External Interrupt Pending Register */
+#define IPIC_SMPRR_A	0x30	/* System Mixed Interrupt group A Priority Register */
+#define IPIC_SMPRR_B	0x34	/* System Mixed Interrupt group B Priority Register */
+#define IPIC_SEMSR	0x38	/* System External Interrupt Mask Register */
+#define IPIC_SECNR	0x3C	/* System External Interrupt Control Register */
+#define IPIC_SERSR	0x40	/* System Error Status Register */
+#define IPIC_SERMR	0x44	/* System Error Mask Register */
+#define IPIC_SERCR	0x48	/* System Error Control Register */
+#define IPIC_SIFCR_H	0x50	/* System Internal Interrupt Force Register (HIGH) */
+#define IPIC_SIFCR_L	0x54	/* System Internal Interrupt Force Register (LOW) */
+#define IPIC_SEFCR	0x58	/* System External Interrupt Force Register */
+#define IPIC_SERFR	0x5C	/* System Error Force Register */
+#define IPIC_SCVCR	0x60	/* System Critical Interrupt Vector Register */
+#define IPIC_SMVCR	0x64	/* System Management Interrupt Vector Register */
+
+enum ipic_prio_grp {
+	IPIC_INT_GRP_A = IPIC_SIPRR_A,
+	IPIC_INT_GRP_D = IPIC_SIPRR_D,
+	IPIC_MIX_GRP_A = IPIC_SMPRR_A,
+	IPIC_MIX_GRP_B = IPIC_SMPRR_B,
+};
+
+enum ipic_mcp_irq {
+	IPIC_MCP_IRQ0 = 0,
+	IPIC_MCP_WDT  = 1,
+	IPIC_MCP_SBA  = 2,
+	IPIC_MCP_PCI1 = 5,
+	IPIC_MCP_PCI2 = 6,
+	IPIC_MCP_MU   = 7,
+};
+
+extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
+		unsigned int irq_offset,
+		unsigned char *senses, unsigned int senses_count);
+extern int ipic_set_priority(unsigned int irq, unsigned int priority);
+extern void ipic_set_highest_priority(unsigned int irq);
+extern void ipic_set_default_priority(void);
+extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
+extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
+extern u32 ipic_get_mcp_status(void);
+extern void ipic_clear_mcp_status(u32 mask);
+extern int ipic_get_irq(struct pt_regs *regs);
+
+#endif /* __ASM_IPIC_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
new file mode 100644
index 000000000000..06b86be61ed1
--- /dev/null
+++ b/include/asm-ppc/irq.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/config.h>
+#include <asm/machdep.h>		/* ppc_md */
+#include <asm/atomic.h>
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK		0x1
+#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
+#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK	0x2
+#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number  of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define	NR_AIC_IRQS 32
+#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+static __inline__ int
+irq_canonicalize(int irq)
+{
+	return (irq);
+}
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define	NR_UIC_IRQS	32
+#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+static __inline__ int
+irq_canonicalize(int irq)
+{
+	return (irq);
+}
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts.  There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS	16
+#define NR_CPM_INTS	32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET		0
+#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns.  This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define	SIU_IRQ0	(0)	/* Highest priority */
+#define	SIU_LEVEL0	(1)
+#define	SIU_IRQ1	(2)
+#define	SIU_LEVEL1	(3)
+#define	SIU_IRQ2	(4)
+#define	SIU_LEVEL2	(5)
+#define	SIU_IRQ3	(6)
+#define	SIU_LEVEL3	(7)
+#define	SIU_IRQ4	(8)
+#define	SIU_LEVEL4	(9)
+#define	SIU_IRQ5	(10)
+#define	SIU_LEVEL5	(11)
+#define	SIU_IRQ6	(12)
+#define	SIU_LEVEL6	(13)
+#define	SIU_IRQ7	(14)
+#define	SIU_LEVEL7	(15)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT		SIU_LEVEL0
+#endif
+#ifndef	CPM_INTERRUPT
+#define CPM_INTERRUPT		SIU_LEVEL2
+#endif
+#ifndef	PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT	SIU_LEVEL6
+#endif
+#ifndef	DEC_INTERRUPT
+#define DEC_INTERRUPT		SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+/* always the same on 8xx -- Cort */
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#define	NR_IRQS	(NR_IPIC_INTS)
+
+#elif defined(CONFIG_85xx)
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc85xx.h>
+
+/* The MPC8560 openpic has  32 internal interrupts and 12 external
+ * interrupts.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * so that we can uniquely identify any interrupt source with a
+ * single integer.
+ */
+#define NR_CPM_INTS	64
+#define NR_EPIC_INTS	44
+#ifndef NR_8259_INTS
+#define NR_8259_INTS	0
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET	0
+#endif
+
+#define NR_IRQS	(NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* Internal IRQs on MPC85xx OpenPIC */
+
+#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
+#ifdef CONFIG_CPM2
+#define MPC85xx_OPENPIC_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
+#else
+#define MPC85xx_OPENPIC_IRQ_OFFSET	0
+#endif
+#endif
+
+/* Not all of these exist on all MPC85xx implementations */
+#define MPC85xx_IRQ_L2CACHE	( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_ECM		( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DDR		( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_LBIU	( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA0	( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA1	( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA2	( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA3	( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI1	( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI2	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_ERROR	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_BELL	(10 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_TX	(11 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_RX	(12 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_TX	(13 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_RX	(14 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_ERROR	(18 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_TX	(19 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_RX	(20 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_ERROR	(24 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_FEC		(25 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DUART	(26 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_IIC1	(27 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PERFMON	(28 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_SEC2	(29 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_CPM		(30 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC85xx_IRQ_EXT0        (32 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT1        (33 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT2        (34 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT3        (35 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT4        (36 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT5        (37 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT6        (38 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT7        (39 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT8        (40 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT9        (41 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT10       (42 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT11       (43 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* CPM related interrupts */
+#define	SIU_INT_ERROR		((uint)0x00+CPM_IRQ_OFFSET)
+#define	SIU_INT_I2C		((uint)0x01+CPM_IRQ_OFFSET)
+#define	SIU_INT_SPI		((uint)0x02+CPM_IRQ_OFFSET)
+#define	SIU_INT_RISC		((uint)0x03+CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
+#define	SIU_INT_USB		((uint)0x0b+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER1		((uint)0x0c+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER2		((uint)0x0d+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER3		((uint)0x0e+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER4		((uint)0x0f+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC1		((uint)0x20+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC2		((uint)0x21+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC3		((uint)0x22+CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC1		((uint)0x24+CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC2		((uint)0x25+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC15		((uint)0x30+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC14		((uint)0x31+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC13		((uint)0x32+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC12		((uint)0x33+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC11		((uint)0x34+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC10		((uint)0x35+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC9		((uint)0x36+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC8		((uint)0x37+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC7		((uint)0x38+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC6		((uint)0x39+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC5		((uint)0x3a+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC4		((uint)0x3b+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC3		((uint)0x3c+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC2		((uint)0x3d+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC1		((uint)0x3e+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC0		((uint)0x3f+CPM_IRQ_OFFSET)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS			256
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS	16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector".  We are only interested
+ * in the interrupt vector.  There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET	0
+#endif
+
+#define NR_CPM_INTS	64
+
+#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
+#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
+#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
+#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+/*
+ * This gets called from serial.c, which is now used on
+ * powermacs as well as prep/chrp boxes.
+ * Prep and chrp both have cascaded 8259 PICs.
+ */
+static __inline__ int irq_canonicalize(int irq)
+{
+	if (ppc_md.irq_canonicalize)
+		return ppc_md.irq_canonicalize(irq);
+	return irq;
+}
+
+#endif
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+extern atomic_t ppc_n_lost_interrupts;
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/keylargo.h b/include/asm-ppc/keylargo.h
new file mode 100644
index 000000000000..457c75a4622f
--- /dev/null
+++ b/include/asm-ppc/keylargo.h
@@ -0,0 +1,243 @@
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV		0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR		0x34	/* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0		0x38
+#define KEYLARGO_FCR1		0x3c
+#define KEYLARGO_FCR2		0x40
+#define KEYLARGO_FCR3		0x44
+#define KEYLARGO_FCR4		0x48
+#define KEYLARGO_FCR5		0x4c	/* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6			0x34
+#define K2_FCR7			0x30
+#define K2_FCR8			0x2c
+#define K2_FCR9			0x28
+#define K2_FCR10		0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0		0x50
+#define KEYLARGO_GPIO_LEVELS1		0x54
+#define KEYLARGO_GPIO_EXTINT_0		0x58
+#define KEYLARGO_GPIO_EXTINT_CNT	18
+#define KEYLARGO_GPIO_0			0x6A
+#define KEYLARGO_GPIO_CNT		17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE	0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE	0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA	0x01
+#define KEYLARGO_GPIO_INPUT_DATA	0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0		0x58
+#define K2_GPIO_EXTINT_CNT		51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET		(KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER		(KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER		(KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE		(KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET		(KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1		(KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT	0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE	0x38
+
+#define KL_GPIO_RESET_CPU0		(KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1		(KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2		(KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3		(KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT		KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0		(KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1		(KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2		(KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3		(KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4		(KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE		0x00000800	/* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE		0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE	0x00002000	/* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE	0x00004000	/* hrm... */
+#define KL_MBCR_MB0_DEV_MASK		0x00007800
+#define KL_MBCR_MB0_DEV_POWER		0x00000400
+#define KL_MBCR_MB0_DEV_RESET		0x00000200
+#define KL_MBCR_MB0_ENABLE		0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE		0x08000000	/* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE		0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE	0x20000000	/* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE	0x40000000	/* hrm... */
+#define KL_MBCR_MB1_DEV_MASK		0x78000000
+#define KL_MBCR_MB1_DEV_POWER		0x04000000
+#define KL_MBCR_MB1_DEV_RESET		0x02000000
+#define KL_MBCR_MB1_ENABLE		0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE		0x00000001	/* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE		0x00000002
+#define KL0_SCC_SLOWPCLK		0x00000004
+#define KL0_SCC_RESET			0x00000008
+#define KL0_SCCA_ENABLE			0x00000010
+#define KL0_SCCB_ENABLE			0x00000020
+#define KL0_SCC_CELL_ENABLE		0x00000040
+#define KL0_IRDA_HIGH_BAND		0x00000100	/* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL		0x00000200	/* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL		0x00000400	/* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE		0x00000400	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET			0x00000800	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL	0x00000800	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1		0x00001000	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND		0x00001000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0		0x00002000	/* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND		0x00002000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT		0x00004000	/* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE		0x00004000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE			0x00008000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL	0x00008000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE		0x00010000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND		0x00010000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE		0x00020000	/* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND		0x00020000	/* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0		0x00040000
+#define KL0_USB0_PAD_SUSPEND1		0x00080000
+#define KL0_USB0_CELL_ENABLE		0x00100000
+#define KL0_USB1_PAD_SUSPEND0		0x00400000
+#define KL0_USB1_PAD_SUSPEND1		0x00800000
+#define KL0_USB1_CELL_ENABLE		0x01000000
+#define KL0_USB_REF_SUSPEND		0x10000000	/* (KL Only) */
+
+#define KL0_SERIAL_ENABLE		(KL0_SCC_B_INTF_ENABLE | \
+					KL0_SCC_SLOWPCLK | \
+					KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE		0x00000001	/* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK		0x00000002	/* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL	0x00000002	/* Intrepid only */
+#define KL1_USB2_REF_SUSPEND		0x00000004	/* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT	0x00000008	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL	0x00000008	/* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0		0x00000010	/* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE	0x00000020	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1		0x00000020	/* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE		0x00000040	/* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE		0x00000040	/* Intrepid only */
+#define KL1_AUDIO_CHOOSE		0x00000080	/* KL/Pangea only */
+#define KL1_I2S0_CHOOSE			0x00000200	/* KL Only */
+#define KL1_I2S0_CELL_ENABLE		0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT		0x00001000
+#define KL1_I2S0_ENABLE			0x00002000
+#define KL1_I2S1_CELL_ENABLE		0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT		0x00080000
+#define KL1_I2S1_ENABLE			0x00100000
+#define KL1_EIDE0_ENABLE		0x00800000	/* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N		0x01000000	/* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE		0x04000000	/* KL Only */
+#define KL1_EIDE1_RESET_N		0x08000000	/* KL Only */
+#define KL1_UIDE_ENABLE			0x20000000	/* KL/Pangea Only */
+#define KL1_UIDE_RESET_N		0x40000000	/* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE		0x00000002
+#define KL2_SLEEP_STATE_BIT		0x00000100	/* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS		0x00000100	/* Pangea Only */
+#define KL2_MPIC_ENABLE			0x00020000
+#define KL2_CARDSLOT_RESET		0x00040000	/* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT		0x02000000	/* KL Only ??? */
+#define KL2_MEM_IS_BIG			0x04000000
+#define KL2_CARDSEL_16			0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL		0x00000001	/* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6		0x00000002	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3		0x00000002	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4		0x00000004	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2		0x00000004	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35		0x00000008	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1		0x00000008	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12		0x00000010	/* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_PLL_RESET			0x00000020	/* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN	0x00000020	/* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X		0x00000080	/* KL Only */
+#define KL3_CLK66_ENABLE		0x00000100	/* KL Only */
+#define KL3_CLK49_ENABLE		0x00000200
+#define KL3_CLK45_ENABLE		0x00000400
+#define KL3_CLK31_ENABLE		0x00000800	/* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE		0x00001000
+#define KL3_I2S1_CLK18_ENABLE		0x00002000
+#define KL3_I2S0_CLK18_ENABLE		0x00004000
+#define KL3_VIA_CLK16_ENABLE		0x00008000	/* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE		0x00008000	/* Intrepid only */
+#define KL3_STOPPING33_ENABLED		0x00080000	/* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST		0x00080000	/* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p)		(0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p)		(0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p)		(0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)	(0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p)		(0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p)		(0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p)		(0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p)	(0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p)	(0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p)	(0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p)	(0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p)		(0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p)	(0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p)	(0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31		0000000001	/* Pangea Only */
+#define KL5_SCC_USE_CLK31		0x00000002	/* Pangea Only */
+#define KL5_PWM_CLK32_EN		0x00000004
+#define KL5_CLK3_68_EN			0x00000010
+#define KL5_CLK32_EN			0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET		0x00200000
+#define K2_FCR0_USB1_SWRESET		0x02000000
+#define K2_FCR0_RING_PME_DISABLE	0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N	0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN	0x00000020
+#define K2_FCR1_PCI1_CLK_ENABLE		0x00004000
+#define K2_FCR1_FW_CLK_ENABLE		0x00008000
+#define K2_FCR1_FW_RESET_N		0x00010000
+#define K2_FCR1_GMAC_CLK_ENABLE		0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN		0x00800000
+#define K2_FCR1_GMAC_RESET_N		0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE		0x02000000
+#define K2_FCR1_SATA_POWER_DOWN		0x04000000
+#define K2_FCR1_SATA_RESET_N		0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE		0x10000000
+#define K2_FCR1_UATA_RESET_N		0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66	0x80000000
+
diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h
new file mode 100644
index 000000000000..1d3c927ce626
--- /dev/null
+++ b/include/asm-ppc/kgdb.h
@@ -0,0 +1,57 @@
+/*
+ * kgdb.h: Defines and declarations for serial line source level
+ *         remote debugging of the Linux kernel using gdb.
+ *
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_KGDB_H
+#define _PPC_KGDB_H
+
+#ifndef __ASSEMBLY__
+
+/* Things specific to the gen550 backend. */
+struct uart_port;
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_kgdb_map_scc(void);
+extern void gen550_init(int, struct uart_port *);
+
+/* Things specific to the pmac backend. */
+extern void zs_kgdb_hook(int tty_num);
+
+/* To init the kgdb engine. (called by serial hook)*/
+extern void set_debug_traps(void);
+
+/* To enter the debugger explicitly. */
+extern void breakpoint(void);
+
+/* For taking exceptions
+ * these are defined in traps.c
+ */
+extern void (*debugger)(struct pt_regs *regs);
+extern int (*debugger_bpt)(struct pt_regs *regs);
+extern int (*debugger_sstep)(struct pt_regs *regs);
+extern int (*debugger_iabr_match)(struct pt_regs *regs);
+extern int (*debugger_dabr_match)(struct pt_regs *regs);
+extern void (*debugger_fault_handler)(struct pt_regs *regs);
+
+/* What we bring to the party */
+int kgdb_bpt(struct pt_regs *regs);
+int kgdb_sstep(struct pt_regs *regs);
+void kgdb(struct pt_regs *regs);
+int kgdb_iabr_match(struct pt_regs *regs);
+int kgdb_dabr_match(struct pt_regs *regs);
+
+/*
+ * external low-level support routines (ie macserial.c)
+ */
+extern void kgdb_interruptible(int); /* control interrupts from serial */
+extern void putDebugChar(char);   /* write a single character      */
+extern char getDebugChar(void);   /* read and return a single char */
+
+#endif /* !(__ASSEMBLY__) */
+#endif /* !(_PPC_KGDB_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/kmap_types.h b/include/asm-ppc/kmap_types.h
new file mode 100644
index 000000000000..2589f182a6ad
--- /dev/null
+++ b/include/asm-ppc/kmap_types.h
@@ -0,0 +1,24 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_PPC_SYNC_PAGE,
+	KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/linkage.h b/include/asm-ppc/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-ppc/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-ppc/local.h b/include/asm-ppc/local.h
new file mode 100644
index 000000000000..b08e3eced10e
--- /dev/null
+++ b/include/asm-ppc/local.h
@@ -0,0 +1,6 @@
+#ifndef __PPC_LOCAL_H
+#define __PPC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __PPC_LOCAL_H */
diff --git a/include/asm-ppc/m48t35.h b/include/asm-ppc/m48t35.h
new file mode 100644
index 000000000000..f3c5e5dfa986
--- /dev/null
+++ b/include/asm-ppc/m48t35.h
@@ -0,0 +1,77 @@
+/*
+ *  Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ *  and
+ *  Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ *  The 37 is the 35 plus alarm and century thus the offsets
+ *  are shifted by the extra registers.
+ */
+
+#ifndef __PPC_M48T35_H
+#define __PPC_M48T35_H
+
+/* RTC offsets */
+#define M48T35_RTC_FLAGS	(-8)	/* the negative regs are really T37 only */
+#define M48T35_RTC_CENTURY	(-7)
+#define M48T35_RTC_AL_SEC	(-6)
+#define M48T35_RTC_AL_MIN	(-5)
+#define M48T35_RTC_AL_HRS	(-4)
+#define M48T35_RTC_AL_DOM	(-3)
+#define M48T35_RTC_INTERRUPT	(-2)
+#define M48T35_RTC_WATCHDOG	(-1)
+#define M48T35_RTC_CONTROL	0	/* T35 starts here */
+#define M48T35_RTC_SECONDS	1
+#define M48T35_RTC_MINUTES	2
+#define M48T35_RTC_HOURS	3
+#define M48T35_RTC_DAY		4
+#define M48T35_RTC_DOM		5
+#define M48T35_RTC_MONTH	6
+#define M48T35_RTC_YEAR		7
+
+/* this way help us know which bits go with which regs */
+#define M48T35_RTC_FLAGS_BL           0x10
+#define M48T35_RTC_FLAGS_AF           0x40
+#define M48T35_RTC_FLAGS_WDF          0x80
+
+#define M48T35_RTC_INTERRUPT_AFE       0x80
+#define M48T35_RTC_INTERRUPT_ABE       0x20
+#define M48T35_RTC_INTERRUPT_ALL       (M48T35_RTC_INTERRUPT_AFE|M48T35_RTC_INTERRUPT_ABE)
+
+#define M48T35_RTC_WATCHDOG_RB         0x03
+#define M48T35_RTC_WATCHDOG_BMB        0x7c
+#define M48T35_RTC_WATCHDOG_WDS        0x80
+#define M48T35_RTC_WATCHDOG_ALL        (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W
+
+#define M48T35_RTC_CONTROL_WRITE       0x80
+#define M48T35_RTC_CONTROL_READ        0x40
+#define M48T35_RTC_CONTROL_CAL_SIGN    0x20
+#define M48T35_RTC_CONTROL_CAL_VALUE   0x1f
+#define M48T35_RTC_CONTROL_LOCKED      (M48T35_RTC_WRITE|M48T35_RTC_READ)
+#define M48T35_RTC_CONTROL_CALIBRATION (M48T35_RTC_CONTROL_CAL_SIGN|M48T35_RTC_CONTROL_CAL_VALUE)
+
+#define M48T35_RTC_SECONDS_SEC_1       0x0f
+#define M48T35_RTC_SECONDS_SEC_10      0x70
+#define M48T35_RTC_SECONDS_ST          0x80
+#define M48T35_RTC_SECONDS_SEC_ALL     (M48T35_RTC_SECONDS_SEC_1|M48T35_RTC_SECONDS_SEC_10)
+
+#define M48T35_RTC_MINUTES_MIN_1       0x0f
+#define M48T35_RTC_MINUTES_MIN_10      0x70
+#define M48T35_RTC_MINUTES_MIN_ALL     (M48T35_RTC_MINUTES_MIN_1|M48T35_RTC_MINUTES_MIN_10)
+
+#define M48T35_RTC_HOURS_HRS_1         0x0f
+#define M48T35_RTC_HOURS_HRS_10        0x30
+#define M48T35_RTC_HOURS_HRS_ALL       (M48T35_RTC_HOURS_HRS_1|M48T35_RTC_HOURS_HRS_10)
+
+#define M48T35_RTC_DAY_DAY_1           0x03
+#define M48T35_RTC_DAY_FT              0x40
+
+#define M48T35_RTC_ALARM_OFF           0x00
+#define M48T35_RTC_WATCHDOG_OFF        0x00
+
+
+/* legacy */
+#define M48T35_RTC_SET      0x80
+#define M48T35_RTC_STOPPED  0x80
+#define M48T35_RTC_READ     0x40
+
+
+#endif
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
new file mode 100644
index 000000000000..163a6b91d5b2
--- /dev/null
+++ b/include/asm-ppc/m8260_pci.h
@@ -0,0 +1,186 @@
+/*
+ * include/asm-ppc/m8260_pci.h
+ *
+ * Definitions for the MPC8250/MPC8265/MPC8266 integrated PCI host bridge.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __M8260_PCI_H
+#define __M8260_PCI_H
+
+#include <linux/pci_ids.h>
+
+/*
+ * Define the vendor/device ID for the MPC8265.
+ */
+#define	PCI_DEVICE_ID_MPC8265	((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+#define M8265_PCIBR0	0x101ac
+#define M8265_PCIBR1	0x101b0
+#define M8265_PCIMSK0	0x101c4
+#define M8265_PCIMSK1	0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE        0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KiB         0xFFFF8000  /* Size of window, smallest */
+#define PCIMSK_64KiB         0xFFFF0000
+#define PCIMSK_128KiB        0xFFFE0000
+#define PCIMSK_256KiB        0xFFFC0000
+#define PCIMSK_512KiB        0xFFF80000
+#define PCIMSK_1MiB          0xFFF00000
+#define PCIMSK_2MiB          0xFFE00000
+#define PCIMSK_4MiB          0xFFC00000
+#define PCIMSK_8MiB          0xFF800000
+#define PCIMSK_16MiB         0xFF000000
+#define PCIMSK_32MiB         0xFE000000
+#define PCIMSK_64MiB         0xFC000000
+#define PCIMSK_128MiB        0xF8000000
+#define PCIMSK_256MiB        0xF0000000
+#define PCIMSK_512MiB        0xE0000000
+#define PCIMSK_1GiB          0xC0000000  /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus (local) 
+ * addresses are translated to PCI addresses when the MPC826x is a PCI bus 
+ * master (initiator).
+ */
+
+#define POTAR_REG0          0x10800     /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1          0x10818
+#define POTAR_REG2          0x10830
+
+#define POBAR_REG0          0x10808     /* PCI Outbound Base Addr registers */
+#define POBAR_REG1          0x10820
+#define POBAR_REG2          0x10838
+
+#define POCMR_REG0          0x10810     /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1          0x10828
+#define POCMR_REG2          0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KiB      0x000FFFFF
+#define POCMR_MASK_8KiB      0x000FFFFE
+#define POCMR_MASK_16KiB     0x000FFFFC
+#define POCMR_MASK_32KiB     0x000FFFF8
+#define POCMR_MASK_64KiB     0x000FFFF0
+#define POCMR_MASK_128KiB    0x000FFFE0
+#define POCMR_MASK_256KiB    0x000FFFC0
+#define POCMR_MASK_512KiB    0x000FFF80
+#define POCMR_MASK_1MiB      0x000FFF00
+#define POCMR_MASK_2MiB      0x000FFE00
+#define POCMR_MASK_4MiB      0x000FFC00
+#define POCMR_MASK_8MiB      0x000FF800
+#define POCMR_MASK_16MiB     0x000FF000
+#define POCMR_MASK_32MiB     0x000FE000
+#define POCMR_MASK_64MiB     0x000FC000
+#define POCMR_MASK_128MiB    0x000F8000
+#define POCMR_MASK_256MiB    0x000F0000
+#define POCMR_MASK_512MiB    0x000E0000
+#define POCMR_MASK_1GiB      0x000C0000
+
+#define POCMR_ENABLE        0x80000000
+#define POCMR_PCI_IO        0x40000000
+#define POCMR_PREFETCH_EN   0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG         0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN   0x1
+
+#define PCI_EMR_REG	    0x10888
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI addresses 
+ * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1          0x108D0
+#define PIBAR_REG1          0x108D8
+#define PICMR_REG1          0x108E0
+#define PITAR_REG0          0x108E8
+#define PIBAR_REG0          0x108F0
+#define PICMR_REG0          0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KiB       0x000FFFFF
+#define PICMR_MASK_8KiB       0x000FFFFE
+#define PICMR_MASK_16KiB      0x000FFFFC
+#define PICMR_MASK_32KiB      0x000FFFF8
+#define PICMR_MASK_64KiB      0x000FFFF0
+#define PICMR_MASK_128KiB     0x000FFFE0
+#define PICMR_MASK_256KiB     0x000FFFC0
+#define PICMR_MASK_512KiB     0x000FFF80
+#define PICMR_MASK_1MiB       0x000FFF00
+#define PICMR_MASK_2MiB       0x000FFE00
+#define PICMR_MASK_4MiB       0x000FFC00
+#define PICMR_MASK_8MiB       0x000FF800
+#define PICMR_MASK_16MiB      0x000FF000
+#define PICMR_MASK_32MiB      0x000FE000
+#define PICMR_MASK_64MiB      0x000FC000
+#define PICMR_MASK_128MiB     0x000F8000
+#define PICMR_MASK_256MiB     0x000F0000
+#define PICMR_MASK_512MiB     0x000E0000
+#define PICMR_MASK_1GiB       0x000C0000
+
+#define PICMR_ENABLE         0x80000000
+#define PICMR_NO_SNOOP_EN    0x40000000
+#define PICMR_PREFETCH_EN    0x20000000
+
+/* PCI error Registers */
+
+#define	PCI_ERROR_STATUS_REG		0x10884
+#define	PCI_ERROR_MASK_REG		0x10888
+#define	PCI_ERROR_CONTROL_REG		0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG      0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG      0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG      0x108A0
+
+/* PCI error Register bit defines */
+
+#define	PCI_ERROR_PCI_ADDR_PAR			0x00000001
+#define	PCI_ERROR_PCI_DATA_PAR_WR		0x00000002
+#define	PCI_ERROR_PCI_DATA_PAR_RD		0x00000004
+#define	PCI_ERROR_PCI_NO_RSP			0x00000008
+#define	PCI_ERROR_PCI_TAR_ABT			0x00000010
+#define	PCI_ERROR_PCI_SERR			0x00000020
+#define	PCI_ERROR_PCI_PERR_RD			0x00000040
+#define	PCI_ERROR_PCI_PERR_WR			0x00000080
+#define	PCI_ERROR_I2O_OFQO			0x00000100
+#define	PCI_ERROR_I2O_IPQO			0x00000200
+#define	PCI_ERROR_IRA				0x00000400
+#define	PCI_ERROR_NMI				0x00000800
+#define	PCI_ERROR_I2O_DBMC			0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG     0x10900
+#define PCI_CFG_DATA_REG     0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI  0x3
+
+#endif /* __M8260_PCI_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
new file mode 100644
index 000000000000..b78d40870c95
--- /dev/null
+++ b/include/asm-ppc/machdep.h
@@ -0,0 +1,154 @@
+#ifdef __KERNEL__
+#ifndef _PPC_MACHDEP_H
+#define _PPC_MACHDEP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_APUS
+#include <asm-m68k/machdep.h>
+#endif
+
+struct pt_regs;
+struct pci_bus;	
+struct pci_dev;
+struct seq_file;
+struct file;
+
+/* We export this macro for external modules like Alsa to know if
+ * ppc_md.feature_call is implemented or not
+ */
+#define CONFIG_PPC_HAS_FEATURE_CALLS
+
+struct machdep_calls {
+	void		(*setup_arch)(void);
+	/* Optional, may be NULL. */
+	int		(*show_cpuinfo)(struct seq_file *m);
+	int		(*show_percpuinfo)(struct seq_file *m, int i);
+	/* Optional, may be NULL. */
+	unsigned int	(*irq_canonicalize)(unsigned int irq);
+	void		(*init_IRQ)(void);
+	int		(*get_irq)(struct pt_regs *);
+	
+	/* A general init function, called by ppc_init in init/main.c.
+	   May be NULL. */
+	void		(*init)(void);
+
+	void		(*restart)(char *cmd);
+	void		(*power_off)(void);
+	void		(*halt)(void);
+
+	void		(*idle)(void);
+	void		(*power_save)(void);
+
+	long		(*time_init)(void); /* Optional, may be NULL */
+	int		(*set_rtc_time)(unsigned long nowtime);
+	unsigned long	(*get_rtc_time)(void);
+	unsigned char 	(*rtc_read_val)(int addr);
+	void		(*rtc_write_val)(int addr, unsigned char val);
+	void		(*calibrate_decr)(void);
+
+	void		(*heartbeat)(void);
+	unsigned long	heartbeat_reset;
+	unsigned long	heartbeat_count;
+
+	unsigned long	(*find_end_of_memory)(void);
+	void		(*setup_io_mappings)(void);
+
+	void		(*early_serial_map)(void);
+  	void		(*progress)(char *, unsigned short);
+	void		(*kgdb_map_scc)(void);
+
+	unsigned char 	(*nvram_read_val)(int addr);
+	void		(*nvram_write_val)(int addr, unsigned char val);
+	void		(*nvram_sync)(void);
+
+	/*
+	 * optional PCI "hooks"
+	 */
+
+	/* Called after scanning the bus, before allocating resources */
+	void (*pcibios_fixup)(void);
+
+	/* Called after PPC generic resource fixup to perform
+	   machine specific fixups */
+	void (*pcibios_fixup_resources)(struct pci_dev *);
+
+	/* Called for each PCI bus in the system when it's probed */
+	void (*pcibios_fixup_bus)(struct pci_bus *);
+
+	/* Called when pci_enable_device() is called (initial=0) or
+	 * when a device with no assigned resource is found (initial=1).
+	 * Returns 0 to allow assignment/enabling of the device. */
+	int  (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
+
+	/* For interrupt routing */
+	unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *);
+	int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char);
+
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(unsigned char, unsigned char);
+
+	/* Called at then very end of pcibios_init() */
+	void (*pcibios_after_init)(void);
+
+	/* Get access protection for /dev/mem */
+	pgprot_t	(*phys_mem_access_prot)(struct file *file,
+						unsigned long offset,
+						unsigned long size,
+						pgprot_t vma_prot);
+
+	/* this is for modules, since _machine can be a define -- Cort */
+	int ppc_machine;
+
+	/* Motherboard/chipset features. This is a kind of general purpose
+	 * hook used to control some machine specific features (like reset
+	 * lines, chip power control, etc...).
+	 */
+	long (*feature_call)(unsigned int feature, ...);
+
+#ifdef CONFIG_SMP
+	/* functions for dealing with other cpus */
+	struct smp_ops_t *smp_ops;
+#endif /* CONFIG_SMP */
+};
+
+extern struct machdep_calls ppc_md;
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+extern void setup_pci_ptrs(void);
+
+/*
+ * Power macintoshes have either a CUDA or a PMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+	SYS_CTRLER_UNKNOWN = 0,
+	SYS_CTRLER_CUDA = 1,
+	SYS_CTRLER_PMU = 2,
+	SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+
+extern sys_ctrler_t sys_ctrler;
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+	void  (*message_pass)(int target, int msg, unsigned long data, int wait);
+	int   (*probe)(void);
+	void  (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*space_timers)(int nr);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+};
+
+/* Poor default implementations */
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
+#endif /* CONFIG_SMP */
+
+#endif /* _PPC_MACHDEP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h
new file mode 100644
index 000000000000..00605bb88b2a
--- /dev/null
+++ b/include/asm-ppc/macio.h
@@ -0,0 +1,140 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+
+#include <asm/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES	8
+#define MACIO_DEV_COUNT_IRQS		8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+	struct macio_chip	*chip;		/* macio_chip (private use) */
+	int			index;		/* macio chip index in system */
+#ifdef CONFIG_PCI
+	struct pci_dev		*pdev;		/* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+	struct macio_bus	*bus;		/* macio bus this device is on */
+	struct macio_dev	*media_bay;	/* Device is part of a media bay */
+	struct of_device	ofdev;
+	int			n_resources;
+	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
+	int			n_interrupts;
+	struct resource		interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define	to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define	of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+	return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+	struct resource *res = &dev->resource[resource_no];
+	if (res->start == 0 || res->end == 0 || res->end < res->start)
+		return 0;
+	return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+	return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+	return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+	return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+	return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+	return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+	char			*name;
+	struct of_match		*match_table;
+	struct module		*owner;
+
+	int	(*probe)(struct macio_dev* dev, const struct of_match *match);
+	int	(*remove)(struct macio_dev* dev);
+
+	int	(*suspend)(struct macio_dev* dev, u32 state);
+	int	(*resume)(struct macio_dev* dev);
+	int	(*shutdown)(struct macio_dev* dev);
+
+	struct device_driver	driver;
+};
+#define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-ppc/mc146818rtc.h b/include/asm-ppc/mc146818rtc.h
new file mode 100644
index 000000000000..227018b2fef8
--- /dev/null
+++ b/include/asm-ppc/mc146818rtc.h
@@ -0,0 +1,31 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_MC146818RTC_H
+#define __ASM_PPC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_PPC_MC146818RTC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/md.h b/include/asm-ppc/md.h
new file mode 100644
index 000000000000..9a9b6b42b4b4
--- /dev/null
+++ b/include/asm-ppc/md.h
@@ -0,0 +1,15 @@
+/*
+ * md.h: High speed xor_block operation for RAID4/5
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mediabay.h b/include/asm-ppc/mediabay.h
new file mode 100644
index 000000000000..9daa3252d7b6
--- /dev/null
+++ b/include/asm-ppc/mediabay.h
@@ -0,0 +1,31 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD		0	/* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1		1	/* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND	2	/* sound device ? */
+#define MB_CD		3	/* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI		5	/* media bay contains a PCI device */
+#define MB_POWER	6	/* media bay contains a Power device (???) */
+#define MB_NO		7	/* media bay contains nothing */
+
+int check_media_bay(struct device_node *which_bay, int what);
+int check_media_bay_by_base(unsigned long base, int what);
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+/* called by pmac-ide.c to register IDE controller for media bay */
+extern int media_bay_set_ide_infos(struct device_node* which_bay,
+			unsigned long base, int irq, int index);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-ppc/mk48t59.h b/include/asm-ppc/mk48t59.h
new file mode 100644
index 000000000000..6a0ed6fc2d56
--- /dev/null
+++ b/include/asm-ppc/mk48t59.h
@@ -0,0 +1,27 @@
+/*
+ * Registers for the mk48t59 real-time-clock
+ */
+
+#ifndef _PPC_MK48T59_H
+#define _PPC_MK48T59_H
+
+/* RTC Offsets */
+
+#define MK48T59_RTC_SECONDS		0x1FF9
+#define MK48T59_RTC_MINUTES		0x1FFA
+#define MK48T59_RTC_HOURS		0x1FFB
+#define MK48T59_RTC_DAY_OF_WEEK		0x1FFC
+#define MK48T59_RTC_DAY_OF_MONTH	0x1FFD
+#define MK48T59_RTC_MONTH		0x1FFE
+#define MK48T59_RTC_YEAR		0x1FFF
+
+#define MK48T59_RTC_CONTROLA		0x1FF8
+#define MK48T59_RTC_CA_WRITE		0x80
+#define MK48T59_RTC_CA_READ		0x40
+#define MK48T59_RTC_CA_CALIB_SIGN	0x20
+#define MK48T59_RTC_CA_CALIB_MASK	0x1f
+
+#define MK48T59_RTC_CONTROLB		0x1FF9
+#define MK48T59_RTC_CB_STOP		0x80
+
+#endif /* _PPC_MK48T59_H */
diff --git a/include/asm-ppc/mman.h b/include/asm-ppc/mman.h
new file mode 100644
index 000000000000..5fd19fd4936c
--- /dev/null
+++ b/include/asm-ppc/mman.h
@@ -0,0 +1,44 @@
+#ifndef __PPC_MMAN_H__
+#define __PPC_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __PPC_MMAN_H__ */
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
new file mode 100644
index 000000000000..4a0c67f672c2
--- /dev/null
+++ b/include/asm-ppc/mmu.h
@@ -0,0 +1,454 @@
+/*
+ * PowerPC memory management structures
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_MMU_H_
+#define _PPC_MMU_H_
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Define physical address type.  Machines using split size
+ * virtual/physical addressing like 32-bit virtual / 36-bit
+ * physical need a larger than native word size type. -Matt
+ */
+#ifndef CONFIG_PTE_64BIT
+typedef unsigned long phys_addr_t;
+#else
+typedef unsigned long long phys_addr_t;
+extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+#endif
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+#ifdef CONFIG_PPC64BRIDGE
+	unsigned long long vsid:52;
+	unsigned long api:5;
+	unsigned long :5;
+	unsigned long h:1;
+	unsigned long v:1;
+	unsigned long long rpn:52;
+#else /* CONFIG_PPC64BRIDGE */
+	unsigned long v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long h:1;	/* Hash algorithm indicator */
+	unsigned long api:6;	/* Abbreviated page index */
+	unsigned long rpn:20;	/* Real (physical) page number */
+#endif /* CONFIG_PPC64BRIDGE */
+	unsigned long    :3;	/* Unused */
+	unsigned long r:1;	/* Referenced */
+	unsigned long c:1;	/* Changed */
+	unsigned long w:1;	/* Write-thru cache mode */
+	unsigned long i:1;	/* Cache inhibited */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded */
+	unsigned long  :1;	/* Unused */
+	unsigned long pp:2;	/* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+	unsigned long t:1;	/* Normal or I/O  type */
+	unsigned long ks:1;	/* Supervisor 'key' (normally 0) */
+	unsigned long kp:1;	/* User 'key' (normally 1) */
+	unsigned long n:1;	/* No-execute */
+	unsigned long :4;	/* Unused */
+	unsigned long vsid:24;	/* Virtual Segment Identifier */
+} SEGREG;
+
+/* Block Address Translation (BAT) Registers */
+typedef struct _P601_BATU {	/* Upper part of BAT for 601 processor */
+	unsigned long bepi:15;	/* Effective page index (virtual address) */
+	unsigned long :8;	/* unused */
+	unsigned long w:1;
+	unsigned long i:1;	/* Cache inhibit */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long ks:1;	/* Supervisor key (normally 0) */
+	unsigned long kp:1;	/* User key (normally 1) */
+	unsigned long pp:2;	/* Page access protections */
+} P601_BATU;
+
+typedef struct _BATU {		/* Upper part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+	unsigned long long bepi:47;
+#else /* CONFIG_PPC64BRIDGE */
+	unsigned long bepi:15;	/* Effective page index (virtual address) */
+#endif /* CONFIG_PPC64BRIDGE */
+	unsigned long :4;	/* Unused */
+	unsigned long bl:11;	/* Block size mask */
+	unsigned long vs:1;	/* Supervisor valid */
+	unsigned long vp:1;	/* User valid */
+} BATU;
+
+typedef struct _P601_BATL {	/* Lower part of BAT for 601 processor */
+	unsigned long brpn:15;	/* Real page index (physical address) */
+	unsigned long :10;	/* Unused */
+	unsigned long v:1;	/* Valid bit */
+	unsigned long bl:6;	/* Block size mask */
+} P601_BATL;
+
+typedef struct _BATL {		/* Lower part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+	unsigned long long brpn:47;
+#else /* CONFIG_PPC64BRIDGE */
+	unsigned long brpn:15;	/* Real page index (physical address) */
+#endif /* CONFIG_PPC64BRIDGE */
+	unsigned long :10;	/* Unused */
+	unsigned long w:1;	/* Write-thru cache */
+	unsigned long i:1;	/* Cache inhibit */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded (MBZ in IBAT) */
+	unsigned long :1;	/* Unused */
+	unsigned long pp:2;	/* Page access protections */
+} BATL;
+
+typedef struct _BAT {
+	BATU batu;		/* Upper register */
+	BATL batl;		/* Lower register */
+} BAT;
+
+typedef struct _P601_BAT {
+	P601_BATU batu;		/* Upper register */
+	P601_BATL batl;		/* Lower register */
+} P601_BAT;
+
+#endif /* __ASSEMBLY__ */
+
+/* Block size masks */
+#define BL_128K	0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M   0x007
+#define BL_2M   0x00F
+#define BL_4M   0x01F
+#define BL_8M   0x03F
+#define BL_16M  0x07F
+#define BL_32M  0x0FF
+#define BL_64M  0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX	0x00		/* No access */
+#define BPP_RX	0x01		/* Read only */
+#define BPP_RW	0x02		/* Read/write */
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read.  A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define SPRN_MI_CTR	784	/* Instruction TLB control register */
+#define MI_GPM		0x80000000	/* Set domain manager mode */
+#define MI_PPM		0x40000000	/* Set subpage protection */
+#define MI_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MI_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MI_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MI_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MI_RESETVAL	0x00000000	/* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MI_AP	786
+#define MI_Ks		0x80000000	/* Should not be set */
+#define MI_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MI_EPN	787
+#define MI_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MI_EVALID	0x00000200	/* Entry is valid */
+#define MI_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define SPRN_MI_TWC	789
+#define MI_APG		0x000001e0	/* Access protection group (0) */
+#define MI_GUARDED	0x00000010	/* Guarded storage */
+#define MI_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MI_PS8MEG	0x0000000c	/* 8M page size */
+#define MI_PS512K	0x00000004	/* 512K page size */
+#define MI_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MI_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define SPRN_MI_RPN	790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization.  This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT	0x000001fd
+
+#define SPRN_MD_CTR	792	/* Data TLB control register */
+#define MD_GPM		0x80000000	/* Set domain manager mode */
+#define MD_PPM		0x40000000	/* Set subpage protection */
+#define MD_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MD_WTDEF	0x10000000	/* Set writethrough when MMU dis */
+#define MD_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MD_TWAM		0x04000000	/* Use 4K page hardware assist */
+#define MD_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MD_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MD_RESETVAL	0x04000000	/* Value of register at reset */
+
+#define SPRN_M_CASID	793	/* Address space ID (context) to match */
+#define MC_ASIDMASK	0x0000000f	/* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MD_AP	794
+#define MD_Ks		0x80000000	/* Should not be set */
+#define MD_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MD_EPN	795
+#define MD_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MD_EVALID	0x00000200	/* Entry is valid */
+#define MD_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define SPRN_M_TWB	796
+#define	M_L1TB		0xfffff000	/* Level 1 table base address */
+#define M_L1INDX	0x00000ffc	/* Level 1 index, when read */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written.  It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define SPRN_MD_TWC	797
+#define MD_L2TB		0xfffff000	/* Level 2 table base address */
+#define MD_L2INDX	0xfffffe00	/* Level 2 index (*pte), when read */
+#define MD_APG		0x000001e0	/* Access protection group (0) */
+#define MD_GUARDED	0x00000010	/* Guarded storage */
+#define MD_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MD_PS8MEG	0x0000000c	/* 8M page size */
+#define MD_PS512K	0x00000004	/* 512K page size */
+#define MD_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MD_WT		0x00000002	/* Use writethrough page attribute */
+#define MD_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define SPRN_MD_RPN	798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define SPRN_M_TW	799
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully- associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively.
+ */
+
+#define        PPC4XX_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion.  On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define	TLB_LO          1
+#define	TLB_HI          0
+
+#define	TLB_DATA        TLB_LO
+#define	TLB_TAG         TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
+#define   PAGESZ_1K		0
+#define   PAGESZ_4K             1
+#define   PAGESZ_16K            2
+#define   PAGESZ_64K            3
+#define   PAGESZ_256K           4
+#define   PAGESZ_1M             5
+#define   PAGESZ_4M             6
+#define   PAGESZ_16M            7
+#define TLB_VALID       0x00000040      /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
+#define TLB_PERM_MASK   0x00000300
+#define TLB_EX          0x00000200      /* Instruction execution allowed */
+#define TLB_WR          0x00000100      /* Writes permitted */
+#define TLB_ZSEL_MASK   0x000000F0
+#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK   0x0000000F
+#define TLB_W           0x00000008      /* Caching is write-through */
+#define TLB_I           0x00000004      /* Caching is inhibited */
+#define TLB_M           0x00000002      /* Memory is coherent */
+#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
+
+/*
+ * PPC440 support
+ */
+#define PPC44x_MMUCR_TID	0x000000ff
+#define PPC44x_MMUCR_STS	0x00010000
+
+#define	PPC44x_TLB_PAGEID	0
+#define	PPC44x_TLB_XLAT		1
+#define	PPC44x_TLB_ATTRIB	2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
+#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
+#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
+#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
+#define PPC44x_TLB_4K		0x00000010
+#define PPC44x_TLB_16K		0x00000020
+#define PPC44x_TLB_64K		0x00000030
+#define PPC44x_TLB_256K		0x00000040
+#define PPC44x_TLB_1M		0x00000050
+#define PPC44x_TLB_16M		0x00000070
+#define	PPC44x_TLB_256M		0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
+#define	PPC44x_TLB_ERPN_MASK	0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK	0x0000ff80
+#define PPC44x_TLB_U0		0x00008000      /* User 0 */
+#define PPC44x_TLB_U1		0x00004000      /* User 1 */
+#define PPC44x_TLB_U2		0x00002000      /* User 2 */
+#define PPC44x_TLB_U3		0x00001000      /* User 3 */
+#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
+#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
+#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
+#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK	0x0000003f
+#define PPC44x_TLB_UX		0x00000020      /* User execution */
+#define PPC44x_TLB_UW		0x00000010      /* User write */
+#define PPC44x_TLB_UR		0x00000008      /* User read */
+#define PPC44x_TLB_SX		0x00000004      /* Super execution */
+#define PPC44x_TLB_SW		0x00000002      /* Super write */
+#define PPC44x_TLB_SR		0x00000001      /* Super read */
+
+/* Book-E defined page sizes */
+#define BOOKE_PAGESZ_1K		0
+#define BOOKE_PAGESZ_4K		1
+#define BOOKE_PAGESZ_16K	2
+#define BOOKE_PAGESZ_64K	3
+#define BOOKE_PAGESZ_256K	4
+#define BOOKE_PAGESZ_1M		5
+#define BOOKE_PAGESZ_4M		6
+#define BOOKE_PAGESZ_16M	7
+#define BOOKE_PAGESZ_64M	8
+#define BOOKE_PAGESZ_256M	9
+#define BOOKE_PAGESZ_1GB	10
+#define BOOKE_PAGESZ_4GB	11
+#define BOOKE_PAGESZ_16GB	12
+#define BOOKE_PAGESZ_64GB	13
+#define BOOKE_PAGESZ_256GB	14
+#define BOOKE_PAGESZ_1TB	15
+
+/*
+ * Freescale Book-E MMU support
+ */
+
+#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
+#define MAS0_NV		0x00000FFF
+
+#define MAS1_VALID 	0x80000000
+#define MAS1_IPROT	0x40000000
+#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
+#define MAS1_TS		0x00001000
+#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+
+#define MAS2_EPN	0xFFFFF000
+#define MAS2_X0		0x00000040
+#define MAS2_X1		0x00000020
+#define MAS2_W		0x00000010
+#define MAS2_I		0x00000008
+#define MAS2_M		0x00000004
+#define MAS2_G		0x00000002
+#define MAS2_E		0x00000001
+
+#define MAS3_RPN	0xFFFFF000
+#define MAS3_U0		0x00000200
+#define MAS3_U1		0x00000100
+#define MAS3_U2		0x00000080
+#define MAS3_U3		0x00000040
+#define MAS3_UX		0x00000020
+#define MAS3_SX		0x00000010
+#define MAS3_UW		0x00000008
+#define MAS3_SW		0x00000004
+#define MAS3_UR		0x00000002
+#define MAS3_SR		0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL	0x000F0000
+#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
+#define MAS4_X0D	0x00000040
+#define MAS4_X1D	0x00000020
+#define MAS4_WD		0x00000010
+#define MAS4_ID		0x00000008
+#define MAS4_MD		0x00000004
+#define MAS4_GD		0x00000002
+#define MAS4_ED		0x00000001
+
+#define MAS6_SPID0	0x3FFF0000
+#define MAS6_SPID1	0x00007FFE
+#define MAS6_SAS	0x00000001
+#define MAS6_SPID	MAS6_SPID0
+
+#define MAS7_RPN	0xFFFFFFFF
+
+#endif /* _PPC_MMU_H_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h
new file mode 100644
index 000000000000..9222fa6ca172
--- /dev/null
+++ b/include/asm-ppc/mmu_context.h
@@ -0,0 +1,197 @@
+#ifdef __KERNEL__
+#ifndef __PPC_MMU_CONTEXT_H
+#define __PPC_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm/cputable.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   The MPC8xx has only 16 contexts.  We rotate through them on each
+   task switch.  A better way would be to keep track of tasks that
+   own contexts, and implement an LRU usage.  That way very active
+   tasks don't always have to pay the TLB reload overhead.  The
+   kernel pages are mapped shared, so the kernel can run on behalf
+   of any task that makes a kernel entry.  Shared does not mean they
+   are not protected, just that the ASID comparison is not performed.
+        -- Dan
+
+   The IBM4xx has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+   	-- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT      	16
+#define LAST_CONTEXT    	15
+#define FIRST_CONTEXT    	0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#elif defined(CONFIG_E500)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT      	((mm_context_t) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS	1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+#ifdef FEW_CONTEXTS
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+#endif
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+#ifdef FEW_CONTEXTS
+	context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+#define init_new_context(tsk,mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+		atomic_inc(&nr_free_contexts);
+#endif
+	}
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+	asm volatile (
+ BEGIN_FTR_SECTION
+	"dssall;\n"
+#ifndef CONFIG_POWER4
+	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	 : : );
+#endif /* CONFIG_ALTIVEC */
+
+	tsk->thread.pgdir = next->pgd;
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+	/* Setup new userspace context */
+	get_mmu_context(next);
+	set_context(next->context, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+#endif /* __PPC_MMU_CONTEXT_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/module.h b/include/asm-ppc/module.h
new file mode 100644
index 000000000000..fb63492562b0
--- /dev/null
+++ b/include/asm-ppc/module.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_PPC_MODULE_H
+#define _ASM_PPC_MODULE_H
+/* Module stuff for PPC.  (C) 2001 Rusty Russell */
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+/* Thanks to Paul M for explaining this.
+
+   PPC can only do rel jumps += 32MB, and often the kernel and other
+   modules are furthur away than this.  So, we jump to a table of
+   trampolines attached to the module (the Procedure Linkage Table)
+   whenever that happens.
+*/
+
+struct ppc_plt_entry
+{
+	/* 16 byte jump instruction sequence (4 instructions) */
+	unsigned int jump[4];
+};
+
+struct mod_arch_specific
+{
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section, init_plt_section;
+
+	/* List of BUG addresses, source line numbers and filenames */
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+	unsigned int num_bugs;
+};
+
+extern struct bug_entry *module_find_bug(unsigned long bugaddr);
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/* Make empty sections for module_frob_arch_sections to expand. */
+#ifdef MODULE
+asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#endif
+#endif /* _ASM_PPC_MODULE_H */
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
new file mode 100644
index 000000000000..d8e7e2d6128e
--- /dev/null
+++ b/include/asm-ppc/mpc10x.h
@@ -0,0 +1,174 @@
+/*
+ * arch/ppc/kernel/mpc10x.h
+ *
+ * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
+ * ctlr/EPIC/etc.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PPC_KERNEL_MPC10X_H
+#define __PPC_KERNEL_MPC10X_H
+
+#include <linux/pci_ids.h>
+#include <asm/pci-bridge.h>
+
+/*
+ * The values here don't completely map everything but should work in most
+ * cases.
+ *
+ * MAP A (PReP Map)
+ *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
+ *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
+ *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
+ *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ *
+ * MAP B (CHRP Map)
+ *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
+ *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
+ *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
+ *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ */
+
+/*
+ * Define the vendor/device IDs for the various bridges--should be added to
+ * <linux/pci_ids.h>
+ */
+#define	MPC10X_BRIDGE_106	((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) |  \
+				  PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_8240	((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_107	((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_8245	((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+/* Define the type of map to use */
+#define	MPC10X_MEM_MAP_A		1
+#define	MPC10X_MEM_MAP_B		2
+
+/* Map A (PReP Map) Defines */
+#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
+#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
+
+#define MPC10X_MAPA_ISA_IO_BASE		0x80000000
+#define MPC10X_MAPA_ISA_MEM_BASE	0xc0000000
+#define	MPC10X_MAPA_DRAM_OFFSET		0x80000000
+
+#define	MPC10X_MAPA_PCI_INTACK_ADDR	0xbffffff0
+#define	MPC10X_MAPA_PCI_IO_START	0x00000000
+#define	MPC10X_MAPA_PCI_IO_END	       (0x00800000 - 1)
+#define	MPC10X_MAPA_PCI_MEM_START	0x00000000
+#define	MPC10X_MAPA_PCI_MEM_END	       (0x20000000 - 1)
+
+#define	MPC10X_MAPA_PCI_MEM_OFFSET	(MPC10X_MAPA_ISA_MEM_BASE -	\
+					 MPC10X_MAPA_PCI_MEM_START)
+
+/* Map B (CHRP Map) Defines */
+#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
+#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
+
+#define MPC10X_MAPB_ISA_IO_BASE		0xfe000000
+#define MPC10X_MAPB_ISA_MEM_BASE	0x80000000
+#define	MPC10X_MAPB_DRAM_OFFSET		0x00000000
+
+#define	MPC10X_MAPB_PCI_INTACK_ADDR	0xfef00000
+#define	MPC10X_MAPB_PCI_IO_START	0x00000000
+#define	MPC10X_MAPB_PCI_IO_END	       (0x00c00000 - 1)
+#define	MPC10X_MAPB_PCI_MEM_START	0x80000000
+#define	MPC10X_MAPB_PCI_MEM_END	       (0xc0000000 - 1)
+
+#define	MPC10X_MAPB_PCI_MEM_OFFSET	(MPC10X_MAPB_ISA_MEM_BASE -	\
+					 MPC10X_MAPB_PCI_MEM_START)
+
+/* Set hose members to values appropriate for the mem map used */
+#define	MPC10X_SETUP_HOSE(hose, map) {					\
+	(hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET;	\
+	(hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START;	\
+	(hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END;		\
+	(hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START;	\
+	(hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END;		\
+	(hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE;	\
+}
+
+
+/* Miscellaneous Configuration register offsets */
+#define	MPC10X_CFG_PIR_REG		0x09
+#define	MPC10X_CFG_PIR_HOST_BRIDGE	0x00
+#define	MPC10X_CFG_PIR_AGENT		0x01
+
+#define	MPC10X_CFG_EUMBBAR		0x78
+
+#define	MPC10X_CFG_PICR1_REG		0xa8
+#define	MPC10X_CFG_PICR1_ADDR_MAP_MASK	0x00010000
+#define	MPC10X_CFG_PICR1_ADDR_MAP_A	0x00010000
+#define	MPC10X_CFG_PICR1_ADDR_MAP_B	0x00000000
+#define	MPC10X_CFG_PICR1_SPEC_PCI_RD	0x00000004
+#define	MPC10X_CFG_PICR1_ST_GATH_EN	0x00000040
+
+#define	MPC10X_CFG_PICR2_REG		0xac
+#define	MPC10X_CFG_PICR2_COPYBACK_OPT	0x00000001
+
+#define	MPC10X_CFG_MAPB_OPTIONS_REG	0xe0
+#define	MPC10X_CFG_MAPB_OPTIONS_CFAE	0x80	/* CPU_FD_ALIAS_EN */
+#define	MPC10X_CFG_MAPB_OPTIONS_PFAE	0x40	/* PCI_FD_ALIAS_EN */
+#define	MPC10X_CFG_MAPB_OPTIONS_DR	0x20	/* DLL_RESET */
+#define	MPC10X_CFG_MAPB_OPTIONS_PCICH	0x08	/* PCI_COMPATIBILITY_HOLE */
+#define	MPC10X_CFG_MAPB_OPTIONS_PROCCH	0x04	/* PROC_COMPATIBILITY_HOLE */
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
+
+/* Define some offset in the EUMB */
+#define	MPC10X_EUMB_SIZE		0x00100000 /* Total EUMB size (1MB) */
+
+#define MPC10X_EUMB_MU_OFFSET		0x00000000 /* Msg Unit reg offset */
+#define MPC10X_EUMB_MU_SIZE		0x00001000 /* Msg Unit reg size */
+#define MPC10X_EUMB_DMA_OFFSET		0x00001000 /* DMA Unit reg offset */
+#define MPC10X_EUMB_DMA_SIZE		0x00001000 /* DMA Unit reg size  */
+#define MPC10X_EUMB_ATU_OFFSET		0x00002000 /* Addr xlate reg offset */
+#define MPC10X_EUMB_ATU_SIZE		0x00001000 /* Addr xlate reg size  */
+#define MPC10X_EUMB_I2C_OFFSET		0x00003000 /* I2C Unit reg offset */
+#define MPC10X_EUMB_I2C_SIZE		0x00001000 /* I2C Unit reg size  */
+#define MPC10X_EUMB_DUART_OFFSET	0x00004000 /* DUART Unit reg offset (8245) */
+#define MPC10X_EUMB_DUART_SIZE		0x00001000 /* DUART Unit reg size (8245) */
+#define	MPC10X_EUMB_EPIC_OFFSET		0x00040000 /* EPIC offset in EUMB */
+#define	MPC10X_EUMB_EPIC_SIZE		0x00030000 /* EPIC size */
+#define MPC10X_EUMB_PM_OFFSET		0x000fe000 /* Performance Monitor reg offset (8245) */
+#define MPC10X_EUMB_PM_SIZE		0x00001000 /* Performance Monitor reg size (8245) */
+#define MPC10X_EUMB_WP_OFFSET		0x000ff000 /* Data path diagnostic, watchpoint reg offset */
+#define MPC10X_EUMB_WP_SIZE		0x00001000 /* Data path diagnostic, watchpoint reg size */
+
+/*
+ * Define some recommended places to put the EUMB regs.
+ * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
+ */
+extern unsigned long			ioremap_base;
+#define	MPC10X_MAPA_EUMB_BASE		(ioremap_base - MPC10X_EUMB_SIZE)
+#define	MPC10X_MAPB_EUMB_BASE		MPC10X_MAPA_EUMB_BASE
+
+
+int mpc10x_bridge_init(struct pci_controller *hose,
+		       uint current_map,
+		       uint new_map,
+		       uint phys_eumb_base);
+unsigned long mpc10x_get_mem_size(uint mem_map);
+int mpc10x_enable_store_gathering(struct pci_controller *hose);
+int mpc10x_disable_store_gathering(struct pci_controller *hose);
+
+/* For MPC107 boards that use the built-in openpic */
+void mpc10x_set_openpic(void);
+
+#endif	/* __PPC_KERNEL_MPC10X_H */
diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
new file mode 100644
index 000000000000..e5f80c22fbfc
--- /dev/null
+++ b/include/asm-ppc/mpc52xx.h
@@ -0,0 +1,445 @@
+/*
+ * include/asm-ppc/mpc52xx.h
+ * 
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Originally written by Dale Farnsworth <dfarnsworth@mvista.com> 
+ * for the 2.4 kernel.
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_H__
+#define __ASM_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/ppcboot.h>
+#include <asm/types.h>
+
+struct pt_regs;
+#endif /* __ASSEMBLY__ */
+
+
+/* ======================================================================== */
+/* PPC Sys devices definition                                               */
+/* ======================================================================== */
+
+enum ppc_sys_devices {
+	MPC52xx_MSCAN1,
+	MPC52xx_MSCAN2,
+	MPC52xx_SPI,
+	MPC52xx_USB,
+	MPC52xx_BDLC,
+	MPC52xx_PSC1,
+	MPC52xx_PSC2,
+	MPC52xx_PSC3,
+	MPC52xx_PSC4,
+	MPC52xx_PSC5,
+	MPC52xx_PSC6,
+	MPC52xx_FEC,
+	MPC52xx_ATA,
+	MPC52xx_I2C1,
+	MPC52xx_I2C2,
+};
+
+
+/* ======================================================================== */
+/* Main registers/struct addresses                                          */
+/* ======================================================================== */
+
+/* MBAR position */
+#define MPC52xx_MBAR		0xf0000000	/* Phys address */
+#define MPC52xx_MBAR_VIRT	0xf0000000	/* Virt address */
+#define MPC52xx_MBAR_SIZE	0x00010000
+
+#define MPC52xx_PA(x)		((phys_addr_t)(MPC52xx_MBAR + (x)))
+#define MPC52xx_VA(x)		((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
+
+/* Registers zone offset/size  */
+#define MPC52xx_MMAP_CTL_OFFSET		0x0000
+#define MPC52xx_MMAP_CTL_SIZE		0x068
+#define MPC52xx_SDRAM_OFFSET		0x0100
+#define MPC52xx_SDRAM_SIZE		0x010
+#define MPC52xx_CDM_OFFSET		0x0200
+#define MPC52xx_CDM_SIZE		0x038
+#define MPC52xx_INTR_OFFSET		0x0500
+#define MPC52xx_INTR_SIZE		0x04c
+#define MPC52xx_GPTx_OFFSET(x)		(0x0600 + ((x)<<4))
+#define MPC52xx_GPT_SIZE		0x010
+#define MPC52xx_RTC_OFFSET		0x0800
+#define MPC52xx_RTC_SIZE		0x024
+#define MPC52xx_GPIO_OFFSET		0x0b00
+#define MPC52xx_GPIO_SIZE		0x040
+#define MPC52xx_GPIO_WKUP_OFFSET	0x0c00
+#define MPC52xx_GPIO_WKUP_SIZE		0x028
+#define MPC52xx_PCI_OFFSET		0x0d00
+#define MPC52xx_PCI_SIZE		0x100
+#define MPC52xx_SDMA_OFFSET		0x1200
+#define MPC52xx_SDMA_SIZE		0x100
+#define MPC52xx_XLB_OFFSET		0x1f00
+#define MPC52xx_XLB_SIZE		0x100
+#define MPC52xx_PSCx_OFFSET(x)		(((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
+#define MPC52xx_PSC_SIZE		0x0a0
+
+/* SRAM used for SDMA */
+#define MPC52xx_SRAM_OFFSET		0x8000
+#define MPC52xx_SRAM_SIZE		0x4000
+
+
+/* ======================================================================== */
+/* IRQ mapping                                                              */
+/* ======================================================================== */
+/* Be sure to look at mpc52xx_pic.h if you wish for whatever reason to change
+ * this
+ */
+
+#define MPC52xx_CRIT_IRQ_NUM	4
+#define MPC52xx_MAIN_IRQ_NUM	17
+#define MPC52xx_SDMA_IRQ_NUM	17
+#define MPC52xx_PERP_IRQ_NUM	23
+
+#define MPC52xx_CRIT_IRQ_BASE	0
+#define MPC52xx_MAIN_IRQ_BASE	(MPC52xx_CRIT_IRQ_BASE + MPC52xx_CRIT_IRQ_NUM)
+#define MPC52xx_SDMA_IRQ_BASE	(MPC52xx_MAIN_IRQ_BASE + MPC52xx_MAIN_IRQ_NUM)
+#define MPC52xx_PERP_IRQ_BASE	(MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)
+
+#define MPC52xx_IRQ0			(MPC52xx_CRIT_IRQ_BASE + 0)
+#define MPC52xx_SLICE_TIMER_0_IRQ	(MPC52xx_CRIT_IRQ_BASE + 1)
+#define MPC52xx_HI_INT_IRQ		(MPC52xx_CRIT_IRQ_BASE + 2)
+#define MPC52xx_CCS_IRQ			(MPC52xx_CRIT_IRQ_BASE + 3)
+
+#define MPC52xx_IRQ1			(MPC52xx_MAIN_IRQ_BASE + 1)
+#define MPC52xx_IRQ2			(MPC52xx_MAIN_IRQ_BASE + 2)
+#define MPC52xx_IRQ3			(MPC52xx_MAIN_IRQ_BASE + 3)
+
+#define MPC52xx_SDMA_IRQ		(MPC52xx_PERP_IRQ_BASE + 0)
+#define MPC52xx_PSC1_IRQ		(MPC52xx_PERP_IRQ_BASE + 1)
+#define MPC52xx_PSC2_IRQ		(MPC52xx_PERP_IRQ_BASE + 2)
+#define MPC52xx_PSC3_IRQ		(MPC52xx_PERP_IRQ_BASE + 3)
+#define MPC52xx_PSC6_IRQ		(MPC52xx_PERP_IRQ_BASE + 4)
+#define MPC52xx_IRDA_IRQ		(MPC52xx_PERP_IRQ_BASE + 4)
+#define MPC52xx_FEC_IRQ			(MPC52xx_PERP_IRQ_BASE + 5)
+#define MPC52xx_USB_IRQ			(MPC52xx_PERP_IRQ_BASE + 6)
+#define MPC52xx_ATA_IRQ			(MPC52xx_PERP_IRQ_BASE + 7)
+#define MPC52xx_PCI_CNTRL_IRQ		(MPC52xx_PERP_IRQ_BASE + 8)
+#define MPC52xx_PCI_SCIRX_IRQ		(MPC52xx_PERP_IRQ_BASE + 9)
+#define MPC52xx_PCI_SCITX_IRQ		(MPC52xx_PERP_IRQ_BASE + 10)
+#define MPC52xx_PSC4_IRQ		(MPC52xx_PERP_IRQ_BASE + 11)
+#define MPC52xx_PSC5_IRQ		(MPC52xx_PERP_IRQ_BASE + 12)
+#define MPC52xx_SPI_MODF_IRQ		(MPC52xx_PERP_IRQ_BASE + 13)
+#define MPC52xx_SPI_SPIF_IRQ		(MPC52xx_PERP_IRQ_BASE + 14)
+#define MPC52xx_I2C1_IRQ		(MPC52xx_PERP_IRQ_BASE + 15)
+#define MPC52xx_I2C2_IRQ		(MPC52xx_PERP_IRQ_BASE + 16)
+#define MPC52xx_MSCAN1_IRQ		(MPC52xx_PERP_IRQ_BASE + 17)
+#define MPC52xx_MSCAN2_IRQ		(MPC52xx_PERP_IRQ_BASE + 18)
+#define MPC52xx_IR_RX_IRQ		(MPC52xx_PERP_IRQ_BASE + 19)
+#define MPC52xx_IR_TX_IRQ		(MPC52xx_PERP_IRQ_BASE + 20)
+#define MPC52xx_XLB_ARB_IRQ		(MPC52xx_PERP_IRQ_BASE + 21)
+#define MPC52xx_BDLC_IRQ		(MPC52xx_PERP_IRQ_BASE + 22)
+
+
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set                             */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+	u32	mbar;		/* MMAP_CTRL + 0x00 */
+
+	u32	cs0_start;	/* MMAP_CTRL + 0x04 */
+	u32	cs0_stop;	/* MMAP_CTRL + 0x08 */
+	u32	cs1_start;	/* MMAP_CTRL + 0x0c */
+	u32	cs1_stop;	/* MMAP_CTRL + 0x10 */
+	u32	cs2_start;	/* MMAP_CTRL + 0x14 */
+	u32	cs2_stop;	/* MMAP_CTRL + 0x18 */
+	u32	cs3_start;	/* MMAP_CTRL + 0x1c */
+	u32	cs3_stop;	/* MMAP_CTRL + 0x20 */
+	u32	cs4_start;	/* MMAP_CTRL + 0x24 */
+	u32	cs4_stop;	/* MMAP_CTRL + 0x28 */
+	u32	cs5_start;	/* MMAP_CTRL + 0x2c */
+	u32	cs5_stop;	/* MMAP_CTRL + 0x30 */
+
+	u32	sdram0;		/* MMAP_CTRL + 0x34 */
+	u32	sdram1;		/* MMAP_CTRL + 0X38 */
+
+	u32	reserved[4];	/* MMAP_CTRL + 0x3c .. 0x48 */
+
+	u32	boot_start;	/* MMAP_CTRL + 0x4c */
+	u32	boot_stop;	/* MMAP_CTRL + 0x50 */
+
+	u32	ipbi_ws_ctrl;	/* MMAP_CTRL + 0x54 */
+
+	u32	cs6_start;	/* MMAP_CTRL + 0x58 */
+	u32	cs6_stop;	/* MMAP_CTRL + 0x5c */
+	u32	cs7_start;	/* MMAP_CTRL + 0x60 */
+	u32	cs7_stop;	/* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+	u32	mode;		/* SDRAM + 0x00 */
+	u32	ctrl;		/* SDRAM + 0x04 */
+	u32	config1;	/* SDRAM + 0x08 */
+	u32	config2;	/* SDRAM + 0x0c */
+};
+
+/* Interrupt controller */
+struct mpc52xx_intr {
+	u32	per_mask;	/* INTR + 0x00 */
+	u32	per_pri1;	/* INTR + 0x04 */
+	u32	per_pri2;	/* INTR + 0x08 */
+	u32	per_pri3;	/* INTR + 0x0c */
+	u32	ctrl;		/* INTR + 0x10 */
+	u32	main_mask;	/* INTR + 0x14 */
+	u32	main_pri1;	/* INTR + 0x18 */
+	u32	main_pri2;	/* INTR + 0x1c */
+	u32	reserved1;	/* INTR + 0x20 */
+	u32	enc_status;	/* INTR + 0x24 */
+	u32	crit_status;	/* INTR + 0x28 */
+	u32	main_status;	/* INTR + 0x2c */
+	u32	per_status;	/* INTR + 0x30 */
+	u32	reserved2;	/* INTR + 0x34 */
+	u32	per_error;	/* INTR + 0x38 */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+	u32	taskBar;	/* SDMA + 0x00 */
+	u32	currentPointer;	/* SDMA + 0x04 */
+	u32	endPointer;	/* SDMA + 0x08 */
+	u32	variablePointer;/* SDMA + 0x0c */
+
+	u8	IntVect1;	/* SDMA + 0x10 */
+	u8	IntVect2;	/* SDMA + 0x11 */
+	u16	PtdCntrl;	/* SDMA + 0x12 */
+
+	u32	IntPend;	/* SDMA + 0x14 */
+	u32	IntMask;	/* SDMA + 0x18 */
+
+	u16	tcr[16];	/* SDMA + 0x1c .. 0x3a */
+
+	u8	ipr[32];	/* SDMA + 0x3c .. 0x5b */
+
+	u32	cReqSelect;	/* SDMA + 0x5c */
+	u32	task_size0;	/* SDMA + 0x60 */
+	u32	task_size1;	/* SDMA + 0x64 */
+	u32	MDEDebug;	/* SDMA + 0x68 */
+	u32	ADSDebug;	/* SDMA + 0x6c */
+	u32	Value1;		/* SDMA + 0x70 */
+	u32	Value2;		/* SDMA + 0x74 */
+	u32	Control;	/* SDMA + 0x78 */
+	u32	Status;		/* SDMA + 0x7c */
+	u32	PTDDebug;	/* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+	u32	mode;		/* GPTx + 0x00 */
+	u32	count;		/* GPTx + 0x04 */
+	u32	pwm;		/* GPTx + 0x08 */
+	u32	status;		/* GPTx + 0X0c */
+};
+
+/* RTC */
+struct mpc52xx_rtc {
+	u32	time_set;	/* RTC + 0x00 */
+	u32	date_set;	/* RTC + 0x04 */
+	u32	stopwatch;	/* RTC + 0x08 */
+	u32	int_enable;	/* RTC + 0x0c */
+	u32	time;		/* RTC + 0x10 */
+	u32	date;		/* RTC + 0x14 */
+	u32	stopwatch_intr;	/* RTC + 0x18 */
+	u32	bus_error;	/* RTC + 0x1c */
+	u32	dividers;	/* RTC + 0x20 */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+	u32	port_config;	/* GPIO + 0x00 */
+	u32	simple_gpioe;	/* GPIO + 0x04 */
+	u32	simple_ode;	/* GPIO + 0x08 */
+	u32	simple_ddr;	/* GPIO + 0x0c */
+	u32	simple_dvo;	/* GPIO + 0x10 */
+	u32	simple_ival;	/* GPIO + 0x14 */
+	u8	outo_gpioe;	/* GPIO + 0x18 */
+	u8	reserved1[3];	/* GPIO + 0x19 */
+	u8	outo_dvo;	/* GPIO + 0x1c */
+	u8	reserved2[3];	/* GPIO + 0x1d */
+	u8	sint_gpioe;	/* GPIO + 0x20 */
+	u8	reserved3[3];	/* GPIO + 0x21 */
+	u8	sint_ode;	/* GPIO + 0x24 */
+	u8	reserved4[3];	/* GPIO + 0x25 */
+	u8	sint_ddr;	/* GPIO + 0x28 */
+	u8	reserved5[3];	/* GPIO + 0x29 */
+	u8	sint_dvo;	/* GPIO + 0x2c */
+	u8	reserved6[3];	/* GPIO + 0x2d */
+	u8	sint_inten;	/* GPIO + 0x30 */
+	u8	reserved7[3];	/* GPIO + 0x31 */
+	u16	sint_itype;	/* GPIO + 0x34 */
+	u16	reserved8;	/* GPIO + 0x36 */
+	u8	gpio_control;	/* GPIO + 0x38 */
+	u8	reserved9[3];	/* GPIO + 0x39 */
+	u8	sint_istat;	/* GPIO + 0x3c */
+	u8	sint_ival;	/* GPIO + 0x3d */
+	u8	bus_errs;	/* GPIO + 0x3e */
+	u8	reserved10;	/* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD	4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD	5
+#define MPC52xx_GPIO_PCI_DIS			(1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+	u8	wkup_gpioe;	/* GPIO_WKUP + 0x00 */
+	u8	reserved1[3];	/* GPIO_WKUP + 0x03 */
+	u8	wkup_ode;	/* GPIO_WKUP + 0x04 */
+	u8	reserved2[3];	/* GPIO_WKUP + 0x05 */
+	u8	wkup_ddr;	/* GPIO_WKUP + 0x08 */
+	u8	reserved3[3];	/* GPIO_WKUP + 0x09 */
+	u8	wkup_dvo;	/* GPIO_WKUP + 0x0C */
+	u8	reserved4[3];	/* GPIO_WKUP + 0x0D */
+	u8	wkup_inten;	/* GPIO_WKUP + 0x10 */
+	u8	reserved5[3];	/* GPIO_WKUP + 0x11 */
+	u8	wkup_iinten;	/* GPIO_WKUP + 0x14 */
+	u8	reserved6[3];	/* GPIO_WKUP + 0x15 */
+	u16	wkup_itype;	/* GPIO_WKUP + 0x18 */
+	u8	reserved7[2];	/* GPIO_WKUP + 0x1A */
+	u8	wkup_maste;	/* GPIO_WKUP + 0x1C */
+	u8	reserved8[3];	/* GPIO_WKUP + 0x1D */
+	u8	wkup_ival;	/* GPIO_WKUP + 0x20 */
+	u8	reserved9[3];	/* GPIO_WKUP + 0x21 */
+	u8	wkup_istat;	/* GPIO_WKUP + 0x24 */
+	u8	reserved10[3];	/* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+	u8	reserved[0x40];
+	u32	config;			/* XLB + 0x40 */
+	u32	version;		/* XLB + 0x44 */
+	u32	status;			/* XLB + 0x48 */
+	u32	int_enable;		/* XLB + 0x4c */
+	u32	addr_capture;		/* XLB + 0x50 */
+	u32	bus_sig_capture;	/* XLB + 0x54 */
+	u32	addr_timeout;		/* XLB + 0x58 */
+	u32	data_timeout;		/* XLB + 0x5c */
+	u32	bus_act_timeout;	/* XLB + 0x60 */
+	u32	master_pri_enable;	/* XLB + 0x64 */
+	u32	master_priority;	/* XLB + 0x68 */
+	u32	base_address;		/* XLB + 0x6c */
+	u32	snoop_window;		/* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_SNOOP		(1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+	u32	jtag_id;		/* CDM + 0x00  reg0 read only */
+	u32	rstcfg;			/* CDM + 0x04  reg1 read only */
+	u32	breadcrumb;		/* CDM + 0x08  reg2 */
+
+	u8	mem_clk_sel;		/* CDM + 0x0c  reg3 byte0 */
+	u8	xlb_clk_sel;		/* CDM + 0x0d  reg3 byte1 read only */
+	u8	ipb_clk_sel;		/* CDM + 0x0e  reg3 byte2 */
+	u8	pci_clk_sel;		/* CDM + 0x0f  reg3 byte3 */
+
+	u8	ext_48mhz_en;		/* CDM + 0x10  reg4 byte0 */
+	u8	fd_enable;		/* CDM + 0x11  reg4 byte1 */
+	u16	fd_counters;		/* CDM + 0x12  reg4 byte2,3 */
+
+	u32	clk_enables;		/* CDM + 0x14  reg5 */
+
+	u8	osc_disable;		/* CDM + 0x18  reg6 byte0 */
+	u8	reserved0[3];		/* CDM + 0x19  reg6 byte1,2,3 */
+
+	u8	ccs_sleep_enable;	/* CDM + 0x1c  reg7 byte0 */
+	u8	osc_sleep_enable;	/* CDM + 0x1d  reg7 byte1 */
+	u8	reserved1;		/* CDM + 0x1e  reg7 byte2 */
+	u8	ccs_qreq_test;		/* CDM + 0x1f  reg7 byte3 */
+
+	u8	soft_reset;		/* CDM + 0x20  u8 byte0 */
+	u8	no_ckstp;		/* CDM + 0x21  u8 byte0 */
+	u8	reserved2[2];		/* CDM + 0x22  u8 byte1,2,3 */
+
+	u8	pll_lock;		/* CDM + 0x24  reg9 byte0 */
+	u8	pll_looselock;		/* CDM + 0x25  reg9 byte1 */
+	u8	pll_sm_lockwin;		/* CDM + 0x26  reg9 byte2 */
+	u8	reserved3;		/* CDM + 0x27  reg9 byte3 */
+
+	u16	reserved4;		/* CDM + 0x28  reg10 byte0,1 */
+	u16	mclken_div_psc1;	/* CDM + 0x2a  reg10 byte2,3 */
+
+	u16	reserved5;		/* CDM + 0x2c  reg11 byte0,1 */
+	u16	mclken_div_psc2;	/* CDM + 0x2e  reg11 byte2,3 */
+
+	u16	reserved6;		/* CDM + 0x30  reg12 byte0,1 */
+	u16	mclken_div_psc3;	/* CDM + 0x32  reg12 byte2,3 */
+
+	u16	reserved7;		/* CDM + 0x34  reg13 byte0,1 */
+	u16	mclken_div_psc6;	/* CDM + 0x36  reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx syslib                                             */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+extern void mpc52xx_init_irq(void);
+extern int mpc52xx_get_irq(struct pt_regs *regs);
+
+extern unsigned long mpc52xx_find_end_of_memory(void);
+extern void mpc52xx_set_bat(void);
+extern void mpc52xx_map_io(void);
+extern void mpc52xx_restart(char *cmd);
+extern void mpc52xx_halt(void);
+extern void mpc52xx_power_off(void);
+extern void mpc52xx_progress(char *s, unsigned short hex);
+extern void mpc52xx_calibrate_decr(void);
+
+extern void mpc52xx_find_bridges(void);
+
+
+	/* Matching of PSC function */
+struct mpc52xx_psc_func {
+	int id;
+	char *func;
+};
+
+extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
+extern struct  mpc52xx_psc_func mpc52xx_psc_functions[];
+	/* This array is to be defined in platform file */
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Platform configuration                                                    */
+/* ========================================================================= */
+
+/* The U-Boot platform information struct */
+extern bd_t __res;
+
+/* Platform options */
+#if defined(CONFIG_LITE5200)
+#include <platforms/lite5200.h>
+#endif
+
+
+#endif /* __ASM_MPC52xx_H__ */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
new file mode 100644
index 000000000000..9d850b2b20b8
--- /dev/null
+++ b/include/asm-ppc/mpc52xx_psc.h
@@ -0,0 +1,191 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ * 
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by 
+ * Dale Farnsworth <dfarnsworth@mvista.com> 
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM	6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE	0x0080
+#define MPC52xx_PSC_SR_RXRDY	0x0100
+#define MPC52xx_PSC_SR_RXFULL	0x0200
+#define MPC52xx_PSC_SR_TXRDY	0x0400
+#define MPC52xx_PSC_SR_TXEMP	0x0800
+#define MPC52xx_PSC_SR_OE	0x1000
+#define MPC52xx_PSC_SR_PE	0x2000
+#define MPC52xx_PSC_SR_FE	0x4000
+#define MPC52xx_PSC_SR_RB	0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE		0x0001
+#define MPC52xx_PSC_RX_DISABLE		0x0002
+#define MPC52xx_PSC_TX_ENABLE		0x0004
+#define MPC52xx_PSC_TX_DISABLE		0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1	0x0010
+#define MPC52xx_PSC_RST_RX		0x0020
+#define MPC52xx_PSC_RST_TX		0x0030
+#define MPC52xx_PSC_RST_ERR_STAT	0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT	0x0050
+#define MPC52xx_PSC_START_BRK		0x0060
+#define MPC52xx_PSC_STOP_BRK		0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR	0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF	0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF	0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR	0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL	0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
+
+/* PSC interrupt mask bits */
+#define MPC52xx_PSC_IMR_TXRDY		0x0100
+#define MPC52xx_PSC_IMR_RXRDY		0x0200
+#define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_IPC		0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS			0x01
+#define MPC52xx_PSC_DCD			0x02
+#define MPC52xx_PSC_D_CTS		0x10
+#define MPC52xx_PSC_D_DCD		0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS			0x00
+#define MPC52xx_PSC_MODE_6_BITS			0x01
+#define MPC52xx_PSC_MODE_7_BITS			0x02
+#define MPC52xx_PSC_MODE_8_BITS			0x03
+#define MPC52xx_PSC_MODE_BITS_MASK		0x03
+#define MPC52xx_PSC_MODE_PAREVEN		0x00
+#define MPC52xx_PSC_MODE_PARODD			0x04
+#define MPC52xx_PSC_MODE_PARFORCE		0x08
+#define MPC52xx_PSC_MODE_PARNONE		0x10
+#define MPC52xx_PSC_MODE_ERR			0x20
+#define MPC52xx_PSC_MODE_FFULL			0x40
+#define MPC52xx_PSC_MODE_RXRTS			0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS	0x00
+#define MPC52xx_PSC_MODE_ONE_STOP		0x07
+#define MPC52xx_PSC_MODE_TWO_STOP		0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK	0x01ff
+
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+	u8		mode;		/* PSC + 0x00 */
+	u8		reserved0[3];
+	union {				/* PSC + 0x04 */
+		u16	status;
+		u16	clock_select;
+	} sr_csr;
+#define mpc52xx_psc_status	sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+	u16		reserved1;
+	u8		command;	/* PSC + 0x08 */
+	u8		reserved2[3];
+	union {				/* PSC + 0x0c */
+		u8	buffer_8;
+		u16	buffer_16;
+		u32	buffer_32;
+	} buffer;
+#define mpc52xx_psc_buffer_8	buffer.buffer_8
+#define mpc52xx_psc_buffer_16	buffer.buffer_16
+#define mpc52xx_psc_buffer_32	buffer.buffer_32
+	union {				/* PSC + 0x10 */
+		u8	ipcr;
+		u8	acr;
+	} ipcr_acr;
+#define mpc52xx_psc_ipcr	ipcr_acr.ipcr
+#define mpc52xx_psc_acr		ipcr_acr.acr
+	u8		reserved3[3];
+	union {				/* PSC + 0x14 */
+		u16	isr;
+		u16	imr;
+	} isr_imr;
+#define mpc52xx_psc_isr		isr_imr.isr
+#define mpc52xx_psc_imr		isr_imr.imr
+	u16		reserved4;
+	u8		ctur;		/* PSC + 0x18 */
+	u8		reserved5[3];
+	u8		ctlr;		/* PSC + 0x1c */
+	u8		reserved6[3];
+	u16		ccr;		/* PSC + 0x20 */
+	u8		reserved7[14];
+	u8		ivr;		/* PSC + 0x30 */
+	u8		reserved8[3];
+	u8		ip;		/* PSC + 0x34 */
+	u8		reserved9[3];
+	u8		op1;		/* PSC + 0x38 */
+	u8		reserved10[3];
+	u8		op0;		/* PSC + 0x3c */
+	u8		reserved11[3];
+	u32		sicr;		/* PSC + 0x40 */
+	u8		ircr1;		/* PSC + 0x44 */
+	u8		reserved13[3];
+	u8		ircr2;		/* PSC + 0x44 */
+	u8		reserved14[3];
+	u8		irsdr;		/* PSC + 0x4c */
+	u8		reserved15[3];
+	u8		irmdr;		/* PSC + 0x50 */
+	u8		reserved16[3];
+	u8		irfdr;		/* PSC + 0x54 */
+	u8		reserved17[3];
+	u16		rfnum;		/* PSC + 0x58 */
+	u16		reserved18;
+	u16		tfnum;		/* PSC + 0x5c */
+	u16		reserved19;
+	u32		rfdata;		/* PSC + 0x60 */
+	u16		rfstat;		/* PSC + 0x64 */
+	u16		reserved20;
+	u8		rfcntl;		/* PSC + 0x68 */
+	u8		reserved21[5];
+	u16		rfalarm;	/* PSC + 0x6e */
+	u16		reserved22;
+	u16		rfrptr;		/* PSC + 0x72 */
+	u16		reserved23;
+	u16		rfwptr;		/* PSC + 0x76 */
+	u16		reserved24;
+	u16		rflrfptr;	/* PSC + 0x7a */
+	u16		reserved25;
+	u16		rflwfptr;	/* PSC + 0x7e */
+	u32		tfdata;		/* PSC + 0x80 */
+	u16		tfstat;		/* PSC + 0x84 */
+	u16		reserved26;
+	u8		tfcntl;		/* PSC + 0x88 */
+	u8		reserved27[5];
+	u16		tfalarm;	/* PSC + 0x8e */
+	u16		reserved28;
+	u16		tfrptr;		/* PSC + 0x92 */
+	u16		reserved29;
+	u16		tfwptr;		/* PSC + 0x96 */
+	u16		reserved30;
+	u16		tflrfptr;	/* PSC + 0x9a */
+	u16		reserved31;
+	u16		tflwfptr;	/* PSC + 0x9e */
+};
+
+
+#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
new file mode 100644
index 000000000000..d820894e5991
--- /dev/null
+++ b/include/asm-ppc/mpc8260.h
@@ -0,0 +1,79 @@
+/*
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8260 configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_MPC8260_H__
+#define __ASM_PPC_MPC8260_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_8260
+
+#ifdef CONFIG_EST8260
+#include <platforms/est8260.h>
+#endif
+
+#ifdef CONFIG_SBC82xx
+#include <platforms/sbc82xx.h>
+#endif
+
+#ifdef CONFIG_SBS8260
+#include <platforms/sbs8260.h>
+#endif
+
+#ifdef CONFIG_RPX8260
+#include <platforms/rpx8260.h>
+#endif
+
+#ifdef CONFIG_WILLOW
+#include <platforms/willow.h>
+#endif
+
+#ifdef CONFIG_TQM8260
+#include <platforms/tqm8260.h>
+#endif
+
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
+#include <platforms/pq2ads.h>
+#endif
+
+#ifdef CONFIG_PCI_8260
+#include <syslib/m8260_pci.h>
+#endif
+
+/* Make sure the memory translation stuff is there if PCI not used.
+ */
+#ifndef _IO_BASE
+#define _IO_BASE        0
+#endif
+
+#ifndef _ISA_MEM_BASE
+#define _ISA_MEM_BASE   0
+#endif
+
+#ifndef PCI_DRAM_OFFSET
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/* Map 256MB I/O region
+ */
+#ifndef IO_PHYS_ADDR
+#define IO_PHYS_ADDR	0xe0000000
+#endif
+#ifndef IO_VIRT_ADDR
+#define IO_VIRT_ADDR	IO_PHYS_ADDR
+#endif
+
+#ifndef __ASSEMBLY__
+/* The "residual" data board information structure the boot loader
+ * hands to us.
+ */
+extern unsigned char __res[];
+#endif
+
+#endif /* CONFIG_8260 */
+#endif /* !__ASM_PPC_MPC8260_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260_pci9.h b/include/asm-ppc/mpc8260_pci9.h
new file mode 100644
index 000000000000..26b3f6e787bc
--- /dev/null
+++ b/include/asm-ppc/mpc8260_pci9.h
@@ -0,0 +1,51 @@
+/* include/asm-ppc/mpc8260_pci9.h
+ *
+ * Undefine the PCI read* and in* macros so we can define them as functions
+ * that implement the workaround for the MPC8260 device erratum PCI 9.
+ *
+ * This header file should only be included at the end of include/asm-ppc/io.h
+ * and never included directly anywhere else.
+ *
+ * Author:  andy_lowe@mvista.com
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _PPC_IO_H
+#error "Do not include mpc8260_pci9.h directly."
+#endif
+
+#ifdef __KERNEL__
+#ifndef __CONFIG_8260_PCI9_DEFS
+#define __CONFIG_8260_PCI9_DEFS
+
+#undef readb
+#undef readw
+#undef readl
+#undef insb
+#undef insw
+#undef insl
+#undef inb
+#undef inw
+#undef inl
+#undef insw_ns
+#undef insl_ns
+#undef memcpy_fromio
+
+extern int readb(volatile unsigned char *addr);
+extern int readw(volatile unsigned short *addr);
+extern unsigned readl(volatile unsigned *addr);
+extern void insb(unsigned port, void *buf, int ns);
+extern void insw(unsigned port, void *buf, int ns);
+extern void insl(unsigned port, void *buf, int nl);
+extern int inb(unsigned port);
+extern int inw(unsigned port);
+extern unsigned inl(unsigned port);
+extern void insw_ns(unsigned port, void *buf, int ns);
+extern void insl_ns(unsigned port, void *buf, int nl);
+extern void *memcpy_fromio(void *dest, unsigned long src, size_t count);
+
+#endif /* !__CONFIG_8260_PCI9_DEFS */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
new file mode 100644
index 000000000000..bb1b0576c947
--- /dev/null
+++ b/include/asm-ppc/mpc83xx.h
@@ -0,0 +1,114 @@
+/*
+ * include/asm-ppc/mpc83xx.h
+ *
+ * MPC83xx definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC83xx_H__
+#define __ASM_MPC83xx_H__
+
+#include <linux/config.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_83xx
+
+#ifdef CONFIG_MPC834x_SYS
+#include <platforms/83xx/mpc834x_sys.h>
+#endif
+
+#define _IO_BASE        isa_io_base
+#define _ISA_MEM_BASE   isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern unsigned char __res[];
+
+/* Internal IRQs on MPC83xx OpenPIC */
+/* Not all of these exist on all MPC83xx implementations */
+
+#ifndef MPC83xx_IPIC_IRQ_OFFSET
+#define MPC83xx_IPIC_IRQ_OFFSET	0
+#endif
+
+#define NR_IPIC_INTS 128
+
+#define MPC83xx_IRQ_UART1	( 9 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_UART2	(10 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SEC2	(11 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_IIC1	(14 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_IIC2	(15 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SPI		(16 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT1	(17 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT2	(18 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT3	(19 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT4	(20 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT5	(21 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT6	(22 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT7	(23 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_TX	(32 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_RX	(33 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_ERROR	(34 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_TX	(35 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_RX	(36 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_ERROR	(37 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_USB2_DR	(38 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_USB2_MPH	(39 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT0	(48 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_RTC_SEC	(64 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PIT		(65 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PCI1	(66 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PCI2	(67 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_RTC_ALR	(68 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_MU		(69 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SBA		(70 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_DMA		(71 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM4	(72 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM8	(73 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GPIO1	(74 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GPIO2	(75 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_DDR		(76 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_LBC		(77 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM2	(78 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM6	(79 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PMC		(80 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM3	(84 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM7	(85 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM1	(90 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM5	(91 + MPC83xx_IPIC_IRQ_OFFSET)
+
+#define MPC83xx_CCSRBAR_SIZE	(1024*1024)
+
+/* Let modules/drivers get at immrbar (physical) */
+extern phys_addr_t immrbar;
+
+enum ppc_sys_devices {
+	MPC83xx_TSEC1,
+	MPC83xx_TSEC2,
+	MPC83xx_IIC1,
+	MPC83xx_IIC2,
+	MPC83xx_DUART,
+	MPC83xx_SEC2,
+	MPC83xx_USB2_DR,
+	MPC83xx_USB2_MPH,
+};
+
+#endif /* CONFIG_83xx */
+#endif /* __ASM_MPC83xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
new file mode 100644
index 000000000000..22713e331585
--- /dev/null
+++ b/include/asm-ppc/mpc85xx.h
@@ -0,0 +1,134 @@
+/*
+ * include/asm-ppc/mpc85xx.h
+ *
+ * MPC85xx definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC85xx_H__
+#define __ASM_MPC85xx_H__
+
+#include <linux/config.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_85xx
+
+#ifdef CONFIG_MPC8540_ADS
+#include <platforms/85xx/mpc8540_ads.h>
+#endif
+#ifdef CONFIG_MPC8555_CDS
+#include <platforms/85xx/mpc8555_cds.h>
+#endif
+#ifdef CONFIG_MPC8560_ADS
+#include <platforms/85xx/mpc8560_ads.h>
+#endif
+#ifdef CONFIG_SBC8560
+#include <platforms/85xx/sbc8560.h>
+#endif
+#ifdef CONFIG_STX_GP3
+#include <platforms/85xx/stx_gp3.h>
+#endif
+
+#define _IO_BASE        isa_io_base
+#define _ISA_MEM_BASE   isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern unsigned char __res[];
+
+/* Offset from CCSRBAR */
+#define MPC85xx_CPM_OFFSET	(0x80000)
+#define MPC85xx_CPM_SIZE	(0x40000)
+#define MPC85xx_DMA_OFFSET	(0x21000)
+#define MPC85xx_DMA_SIZE	(0x01000)
+#define MPC85xx_DMA0_OFFSET	(0x21100)
+#define MPC85xx_DMA0_SIZE	(0x00080)
+#define MPC85xx_DMA1_OFFSET	(0x21180)
+#define MPC85xx_DMA1_SIZE	(0x00080)
+#define MPC85xx_DMA2_OFFSET	(0x21200)
+#define MPC85xx_DMA2_SIZE	(0x00080)
+#define MPC85xx_DMA3_OFFSET	(0x21280)
+#define MPC85xx_DMA3_SIZE	(0x00080)
+#define MPC85xx_ENET1_OFFSET	(0x24000)
+#define MPC85xx_ENET1_SIZE	(0x01000)
+#define MPC85xx_ENET2_OFFSET	(0x25000)
+#define MPC85xx_ENET2_SIZE	(0x01000)
+#define MPC85xx_ENET3_OFFSET	(0x26000)
+#define MPC85xx_ENET3_SIZE	(0x01000)
+#define MPC85xx_GUTS_OFFSET	(0xe0000)
+#define MPC85xx_GUTS_SIZE	(0x01000)
+#define MPC85xx_IIC1_OFFSET	(0x03000)
+#define MPC85xx_IIC1_SIZE	(0x01000)
+#define MPC85xx_OPENPIC_OFFSET	(0x40000)
+#define MPC85xx_OPENPIC_SIZE	(0x40000)
+#define MPC85xx_PCI1_OFFSET	(0x08000)
+#define MPC85xx_PCI1_SIZE	(0x01000)
+#define MPC85xx_PCI2_OFFSET	(0x09000)
+#define MPC85xx_PCI2_SIZE	(0x01000)
+#define MPC85xx_PERFMON_OFFSET	(0xe1000)
+#define MPC85xx_PERFMON_SIZE	(0x01000)
+#define MPC85xx_SEC2_OFFSET	(0x30000)
+#define MPC85xx_SEC2_SIZE	(0x10000)
+#define MPC85xx_UART0_OFFSET	(0x04500)
+#define MPC85xx_UART0_SIZE	(0x00100)
+#define MPC85xx_UART1_OFFSET	(0x04600)
+#define MPC85xx_UART1_SIZE	(0x00100)
+
+#define MPC85xx_CCSRBAR_SIZE	(1024*1024)
+
+/* Let modules/drivers get at CCSRBAR */
+extern phys_addr_t get_ccsrbar(void);
+
+#ifdef MODULE
+#define CCSRBAR get_ccsrbar()
+#else
+#define CCSRBAR BOARD_CCSRBAR
+#endif
+
+enum ppc_sys_devices {
+	MPC85xx_TSEC1,
+	MPC85xx_TSEC2,
+	MPC85xx_FEC,
+	MPC85xx_IIC1,
+	MPC85xx_DMA0,
+	MPC85xx_DMA1,
+	MPC85xx_DMA2,
+	MPC85xx_DMA3,
+	MPC85xx_DUART,
+	MPC85xx_PERFMON,
+	MPC85xx_SEC2,
+	MPC85xx_CPM_SPI,
+	MPC85xx_CPM_I2C,
+	MPC85xx_CPM_USB,
+	MPC85xx_CPM_SCC1,
+	MPC85xx_CPM_SCC2,
+	MPC85xx_CPM_SCC3,
+	MPC85xx_CPM_SCC4,
+	MPC85xx_CPM_FCC1,
+	MPC85xx_CPM_FCC2,
+	MPC85xx_CPM_FCC3,
+	MPC85xx_CPM_MCC1,
+	MPC85xx_CPM_MCC2,
+	MPC85xx_CPM_SMC1,
+	MPC85xx_CPM_SMC2,
+};
+
+#endif /* CONFIG_85xx */
+#endif /* __ASM_MPC85xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
new file mode 100644
index 000000000000..714d69c819d3
--- /dev/null
+++ b/include/asm-ppc/mpc8xx.h
@@ -0,0 +1,103 @@
+/* This is the single file included by all MPC8xx build options.
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8xx configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __CONFIG_8xx_DEFS
+#define __CONFIG_8xx_DEFS
+
+#include <linux/config.h>
+
+#ifdef CONFIG_8xx
+
+#ifdef CONFIG_MBX
+#include <platforms/mbx.h>
+#endif
+
+#ifdef CONFIG_FADS
+#include <platforms/fads.h>
+#endif
+
+#ifdef CONFIG_RPXLITE
+#include <platforms/rpxlite.h>
+#endif
+
+#ifdef CONFIG_BSEIP
+#include <platforms/bseip.h>
+#endif
+
+#ifdef CONFIG_RPXCLASSIC
+#include <platforms/rpxclassic.h>
+#endif
+
+#if defined(CONFIG_TQM8xxL)
+#include <platforms/tqm8xx.h>
+#endif
+
+#if defined(CONFIG_SPD823TS)
+#include <platforms/spd8xx.h>
+#endif
+
+#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
+#include <platforms/ivms8.h>
+#endif
+
+#if defined(CONFIG_HERMES_PRO)
+#include <platforms/hermes.h>
+#endif
+
+#if defined(CONFIG_IP860)
+#include <platforms/ip860.h>
+#endif
+
+#if defined(CONFIG_LWMON)
+#include <platforms/lwmon.h>
+#endif
+
+#if defined(CONFIG_PCU_E)
+#include <platforms/pcu_e.h>
+#endif
+
+#if defined(CONFIG_CCM)
+#include <platforms/ccm.h>
+#endif
+
+#if defined(CONFIG_LANTEC)
+#include <platforms/lantec.h>
+#endif
+
+/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
+ * use the same memory map.
+ */
+#if 0
+#if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR)
+#define	_IO_BASE PCI_ISA_IO_ADDR
+#define	_ISA_MEM_BASE PCI_ISA_MEM_ADDR
+#define PCI_DRAM_OFFSET 0x80000000
+#else
+#define _IO_BASE        0
+#define _ISA_MEM_BASE   0
+#define PCI_DRAM_OFFSET 0
+#endif
+#else
+#if !defined(_IO_BASE)  /* defined in board specific header */
+#define _IO_BASE        0
+#endif
+#define _ISA_MEM_BASE   0
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#ifndef __ASSEMBLY__
+/* The "residual" data board information structure the boot loader
+ * hands to us.
+ */
+extern unsigned char __res[];
+
+struct pt_regs;
+
+#endif /* !__ASSEMBLY__ */
+#endif /* CONFIG_8xx */
+#endif /* __CONFIG_8xx_DEFS */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/msgbuf.h b/include/asm-ppc/msgbuf.h
new file mode 100644
index 000000000000..1053452a9376
--- /dev/null
+++ b/include/asm-ppc/msgbuf.h
@@ -0,0 +1,25 @@
+#ifndef _PPC_MSGBUF_H
+#define _PPC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for the PPC architecture.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	unsigned int	__unused1;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned int	__unused2;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned int	__unused3;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _PPC_MSGBUF_H */
diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h
new file mode 100644
index 000000000000..cc25b921ad4f
--- /dev/null
+++ b/include/asm-ppc/mv64x60.h
@@ -0,0 +1,345 @@
+/*
+ * include/asm-ppc/mv64x60.h
+ *
+ * Prototypes, etc. for the Marvell/Galileo MV64x60 host bridge routines.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_MV64x60_H
+#define __ASMPPC_MV64x60_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/config.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mv64x60_defs.h>
+
+extern u8	mv64x60_pci_exclude_bridge;
+
+extern spinlock_t mv64x60_lock;
+
+/* 32-bit Window table entry defines */
+#define	MV64x60_CPU2MEM_0_WIN			0
+#define	MV64x60_CPU2MEM_1_WIN			1
+#define	MV64x60_CPU2MEM_2_WIN			2
+#define	MV64x60_CPU2MEM_3_WIN			3
+#define	MV64x60_CPU2DEV_0_WIN			4
+#define	MV64x60_CPU2DEV_1_WIN			5
+#define	MV64x60_CPU2DEV_2_WIN			6
+#define	MV64x60_CPU2DEV_3_WIN			7
+#define	MV64x60_CPU2BOOT_WIN			8
+#define	MV64x60_CPU2PCI0_IO_WIN			9
+#define	MV64x60_CPU2PCI0_MEM_0_WIN		10
+#define	MV64x60_CPU2PCI0_MEM_1_WIN		11
+#define	MV64x60_CPU2PCI0_MEM_2_WIN		12
+#define	MV64x60_CPU2PCI0_MEM_3_WIN		13
+#define	MV64x60_CPU2PCI1_IO_WIN			14
+#define	MV64x60_CPU2PCI1_MEM_0_WIN		15
+#define	MV64x60_CPU2PCI1_MEM_1_WIN		16
+#define	MV64x60_CPU2PCI1_MEM_2_WIN		17
+#define	MV64x60_CPU2PCI1_MEM_3_WIN		18
+#define	MV64x60_CPU2SRAM_WIN			19
+#define	MV64x60_CPU2PCI0_IO_REMAP_WIN		20
+#define	MV64x60_CPU2PCI1_IO_REMAP_WIN		21
+#define	MV64x60_CPU_PROT_0_WIN			22
+#define	MV64x60_CPU_PROT_1_WIN			23
+#define	MV64x60_CPU_PROT_2_WIN			24
+#define	MV64x60_CPU_PROT_3_WIN			25
+#define	MV64x60_CPU_SNOOP_0_WIN			26
+#define	MV64x60_CPU_SNOOP_1_WIN			27
+#define	MV64x60_CPU_SNOOP_2_WIN			28
+#define	MV64x60_CPU_SNOOP_3_WIN			29
+#define	MV64x60_PCI02MEM_REMAP_0_WIN		30
+#define	MV64x60_PCI02MEM_REMAP_1_WIN		31
+#define	MV64x60_PCI02MEM_REMAP_2_WIN		32
+#define	MV64x60_PCI02MEM_REMAP_3_WIN		33
+#define	MV64x60_PCI12MEM_REMAP_0_WIN		34
+#define	MV64x60_PCI12MEM_REMAP_1_WIN		35
+#define	MV64x60_PCI12MEM_REMAP_2_WIN		36
+#define	MV64x60_PCI12MEM_REMAP_3_WIN		37
+#define	MV64x60_ENET2MEM_0_WIN			38
+#define	MV64x60_ENET2MEM_1_WIN			39
+#define	MV64x60_ENET2MEM_2_WIN			40
+#define	MV64x60_ENET2MEM_3_WIN			41
+#define	MV64x60_ENET2MEM_4_WIN			42
+#define	MV64x60_ENET2MEM_5_WIN			43
+#define	MV64x60_MPSC2MEM_0_WIN			44
+#define	MV64x60_MPSC2MEM_1_WIN			45
+#define	MV64x60_MPSC2MEM_2_WIN			46
+#define	MV64x60_MPSC2MEM_3_WIN			47
+#define	MV64x60_IDMA2MEM_0_WIN			48
+#define	MV64x60_IDMA2MEM_1_WIN			49
+#define	MV64x60_IDMA2MEM_2_WIN			50
+#define	MV64x60_IDMA2MEM_3_WIN			51
+#define	MV64x60_IDMA2MEM_4_WIN			52
+#define	MV64x60_IDMA2MEM_5_WIN			53
+#define	MV64x60_IDMA2MEM_6_WIN			54
+#define	MV64x60_IDMA2MEM_7_WIN			55
+
+#define	MV64x60_32BIT_WIN_COUNT			56
+
+/* 64-bit Window table entry defines */
+#define	MV64x60_CPU2PCI0_MEM_0_REMAP_WIN	0
+#define	MV64x60_CPU2PCI0_MEM_1_REMAP_WIN	1
+#define	MV64x60_CPU2PCI0_MEM_2_REMAP_WIN	2
+#define	MV64x60_CPU2PCI0_MEM_3_REMAP_WIN	3
+#define	MV64x60_CPU2PCI1_MEM_0_REMAP_WIN	4
+#define	MV64x60_CPU2PCI1_MEM_1_REMAP_WIN	5
+#define	MV64x60_CPU2PCI1_MEM_2_REMAP_WIN	6
+#define	MV64x60_CPU2PCI1_MEM_3_REMAP_WIN	7
+#define	MV64x60_PCI02MEM_ACC_CNTL_0_WIN		8
+#define	MV64x60_PCI02MEM_ACC_CNTL_1_WIN		9
+#define	MV64x60_PCI02MEM_ACC_CNTL_2_WIN		10
+#define	MV64x60_PCI02MEM_ACC_CNTL_3_WIN		11
+#define	MV64x60_PCI12MEM_ACC_CNTL_0_WIN		12
+#define	MV64x60_PCI12MEM_ACC_CNTL_1_WIN		13
+#define	MV64x60_PCI12MEM_ACC_CNTL_2_WIN		14
+#define	MV64x60_PCI12MEM_ACC_CNTL_3_WIN		15
+#define	MV64x60_PCI02MEM_SNOOP_0_WIN		16
+#define	MV64x60_PCI02MEM_SNOOP_1_WIN		17
+#define	MV64x60_PCI02MEM_SNOOP_2_WIN		18
+#define	MV64x60_PCI02MEM_SNOOP_3_WIN		19
+#define	MV64x60_PCI12MEM_SNOOP_0_WIN		20
+#define	MV64x60_PCI12MEM_SNOOP_1_WIN		21
+#define	MV64x60_PCI12MEM_SNOOP_2_WIN		22
+#define	MV64x60_PCI12MEM_SNOOP_3_WIN		23
+
+#define	MV64x60_64BIT_WIN_COUNT			24
+
+/*
+ * Define a structure that's used to pass in config information to the
+ * core routines.
+ */
+struct mv64x60_pci_window {
+	u32	cpu_base;
+	u32	pci_base_hi;
+	u32	pci_base_lo;
+	u32	size;
+	u32	swap;
+};
+
+struct mv64x60_pci_info {
+	u8	enable_bus;	/* allow access to this PCI bus? */
+
+	struct mv64x60_pci_window	pci_io;
+	struct mv64x60_pci_window	pci_mem[3];
+
+	u32	acc_cntl_options[MV64x60_CPU2MEM_WINDOWS];
+	u32	snoop_options[MV64x60_CPU2MEM_WINDOWS];
+	u16	pci_cmd_bits;
+	u16	latency_timer;
+};
+
+struct mv64x60_setup_info {
+	u32	phys_reg_base;
+	u32	window_preserve_mask_32_hi;
+	u32	window_preserve_mask_32_lo;
+	u32	window_preserve_mask_64;
+
+	u32	cpu_prot_options[MV64x60_CPU2MEM_WINDOWS];
+	u32	cpu_snoop_options[MV64x60_CPU2MEM_WINDOWS];
+	u32	enet_options[MV64x60_CPU2MEM_WINDOWS];
+	u32	mpsc_options[MV64x60_CPU2MEM_WINDOWS];
+	u32	idma_options[MV64x60_CPU2MEM_WINDOWS];
+
+	struct mv64x60_pci_info	pci_0;
+	struct mv64x60_pci_info	pci_1;
+};
+
+/* Define what the top bits in the extra member of a window entry means. */
+#define	MV64x60_EXTRA_INVALID		0x00000000
+#define	MV64x60_EXTRA_CPUWIN_ENAB	0x10000000
+#define	MV64x60_EXTRA_CPUPROT_ENAB	0x20000000
+#define	MV64x60_EXTRA_ENET_ENAB		0x30000000
+#define	MV64x60_EXTRA_MPSC_ENAB		0x40000000
+#define	MV64x60_EXTRA_IDMA_ENAB		0x50000000
+#define	MV64x60_EXTRA_PCIACC_ENAB	0x60000000
+
+#define	MV64x60_EXTRA_MASK		0xf0000000
+
+/*
+ * Define the 'handle' struct that will be passed between the 64x60 core
+ * code and the platform-specific code that will use it.  The handle
+ * will contain pointers to chip-specific routines & information.
+ */
+struct mv64x60_32bit_window {
+	u32	base_reg;
+	u32	size_reg;
+	u8	base_bits;
+	u8	size_bits;
+	u32	(*get_from_field)(u32 val, u32 num_bits);
+	u32	(*map_to_field)(u32 val, u32 num_bits);
+	u32	extra;
+};
+
+struct mv64x60_64bit_window {
+	u32	base_hi_reg;
+	u32	base_lo_reg;
+	u32	size_reg;
+	u8	base_lo_bits;
+	u8	size_bits;
+	u32	(*get_from_field)(u32 val, u32 num_bits);
+	u32	(*map_to_field)(u32 val, u32 num_bits);
+	u32	extra;
+};
+
+typedef struct mv64x60_handle	mv64x60_handle_t;
+struct mv64x60_chip_info {
+	u32	(*translate_size)(u32 base, u32 size, u32 num_bits);
+	u32	(*untranslate_size)(u32 base, u32 size, u32 num_bits);
+	void	(*set_pci2mem_window)(struct pci_controller *hose, u32 bus,
+			u32 window, u32 base);
+	void 	(*set_pci2regs_window)(struct mv64x60_handle *bh,
+			struct pci_controller *hose, u32 bus, u32 base);
+	u32	(*is_enabled_32bit)(mv64x60_handle_t *bh, u32 window);
+	void	(*enable_window_32bit)(mv64x60_handle_t *bh, u32 window);
+	void	(*disable_window_32bit)(mv64x60_handle_t *bh, u32 window);
+	void	(*enable_window_64bit)(mv64x60_handle_t *bh, u32 window);
+	void	(*disable_window_64bit)(mv64x60_handle_t *bh, u32 window);
+	void	(*disable_all_windows)(mv64x60_handle_t *bh,
+			struct mv64x60_setup_info *si);
+	void	(*config_io2mem_windows)(mv64x60_handle_t *bh,
+			struct mv64x60_setup_info *si,
+			u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+	void 	(*set_mpsc2regs_window)(struct mv64x60_handle *bh, u32 base);
+	void	(*chip_specific_init)(mv64x60_handle_t *bh,
+			struct mv64x60_setup_info *si);
+
+	struct mv64x60_32bit_window	*window_tab_32bit;
+	struct mv64x60_64bit_window	*window_tab_64bit;
+};
+
+struct mv64x60_handle {
+	u32		type;		/* type of bridge */
+	u32		rev;		/* revision of bridge */
+	void		*v_base;	/* virtual base addr of bridge regs */
+	phys_addr_t	p_base;		/* physical base addr of bridge regs */
+
+	u32		pci_mode_a;	/* pci 0 mode: conventional pci, pci-x*/
+	u32		pci_mode_b;	/* pci 1 mode: conventional pci, pci-x*/
+
+	u32		io_base_a;	/* vaddr of pci 0's I/O space */
+	u32		io_base_b;	/* vaddr of pci 1's I/O space */
+
+	struct pci_controller	*hose_a;
+	struct pci_controller	*hose_b;
+
+	struct mv64x60_chip_info *ci;	/* chip/bridge-specific info */
+};
+
+
+/* Define I/O routines for accessing registers on the 64x60 bridge. */
+extern inline void
+mv64x60_write(struct mv64x60_handle *bh, u32 offset, u32 val) {
+	ulong	flags;
+
+	spin_lock_irqsave(&mv64x60_lock, flags);
+	out_le32(bh->v_base + offset, val);
+	spin_unlock_irqrestore(&mv64x60_lock, flags);
+}
+
+extern inline u32
+mv64x60_read(struct mv64x60_handle *bh, u32 offset) {
+	ulong	flags;
+	u32     reg;
+
+	spin_lock_irqsave(&mv64x60_lock, flags);
+	reg = in_le32(bh->v_base + offset);
+	spin_unlock_irqrestore(&mv64x60_lock, flags);
+	return reg;
+}
+
+extern inline void
+mv64x60_modify(struct mv64x60_handle *bh, u32 offs, u32 data, u32 mask)
+{
+	u32	reg;
+	ulong	flags;
+
+	spin_lock_irqsave(&mv64x60_lock, flags);
+	reg = in_le32(bh->v_base + offs) & (~mask);
+	reg |= data & mask;
+	out_le32(bh->v_base + offs, reg);
+	spin_unlock_irqrestore(&mv64x60_lock, flags);
+}
+
+#define	mv64x60_set_bits(bh, offs, bits) mv64x60_modify(bh, offs, ~0, bits)
+#define	mv64x60_clr_bits(bh, offs, bits) mv64x60_modify(bh, offs, 0, bits)
+
+
+/* Externally visible function prototypes */
+int mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si);
+u32 mv64x60_get_mem_size(u32 bridge_base, u32 chip_type);
+void mv64x60_early_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+void mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr,
+	u32 cfg_data, struct pci_controller **hose);
+int mv64x60_get_type(struct mv64x60_handle *bh);
+int mv64x60_setup_for_chip(struct mv64x60_handle *bh);
+void *mv64x60_get_bridge_vbase(void);
+u32 mv64x60_get_bridge_type(void);
+u32 mv64x60_get_bridge_rev(void);
+void mv64x60_get_mem_windows(struct mv64x60_handle *bh,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
+	struct mv64x60_pci_info *pi, u32 bus);
+void mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
+	struct pci_controller *hose, struct mv64x60_pci_info *pi, u32 bus,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_resources(struct pci_controller *hose,
+	struct mv64x60_pci_info *pi, u32 io_base);
+void mv64x60_config_pci_params(struct pci_controller *hose,
+	struct mv64x60_pci_info *pi);
+void mv64x60_pd_fixup(struct mv64x60_handle *bh,
+	struct platform_device *pd_devs[], u32 entries);
+void mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 *base, u32 *size);
+void mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, u32 base,
+	u32 size, u32 other_bits);
+void mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 *base_hi, u32 *base_lo, u32 *size);
+void mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 base_hi, u32 base_lo, u32 size, u32 other_bits);
+void mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus);
+int mv64x60_pci_exclude_device(u8 bus, u8 devfn);
+
+
+void gt64260_init_irq(void);
+int gt64260_get_irq(struct pt_regs *regs);
+void mv64360_init_irq(void);
+int mv64360_get_irq(struct pt_regs *regs);
+
+u32 mv64x60_mask(u32 val, u32 num_bits);
+u32 mv64x60_shift_left(u32 val, u32 num_bits);
+u32 mv64x60_shift_right(u32 val, u32 num_bits);
+u32 mv64x60_calc_mem_size(struct mv64x60_handle *bh,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+
+void mv64x60_progress_init(u32 base);
+void mv64x60_mpsc_progress(char *s, unsigned short hex);
+
+extern struct mv64x60_32bit_window
+	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT];
+extern struct mv64x60_64bit_window
+	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT];
+extern struct mv64x60_32bit_window
+	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT];
+extern struct mv64x60_64bit_window
+	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT];
+
+#endif /* __ASMPPC_MV64x60_H */
diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h
new file mode 100644
index 000000000000..2f428746c02b
--- /dev/null
+++ b/include/asm-ppc/mv64x60_defs.h
@@ -0,0 +1,973 @@
+/*
+ * include/asm-ppc/gt64260_defs.h
+ *
+ * Register definitions for the Marvell/Galileo GT64260, MV64360, etc.
+ * host bridges.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_MV64x60_DEFS_H
+#define __ASMPPC_MV64x60_DEFS_H
+
+/*
+ * Define the Marvell bridges that are supported
+ */
+#define	MV64x60_TYPE_INVALID			0
+#define	MV64x60_TYPE_GT64260A			1
+#define	MV64x60_TYPE_GT64260B			2
+#define	MV64x60_TYPE_MV64360			3
+#define	MV64x60_TYPE_MV64361			4
+#define	MV64x60_TYPE_MV64362			5
+#define	MV64x60_TYPE_MV64460			6
+
+
+/* Revisions of each supported chip */
+#define	GT64260_REV_A				0x10
+#define	GT64260_REV_B				0x20
+#define	MV64360					0x01
+#define	MV64460					0x01
+
+/* Minimum window size supported by 64260 is 1MB */
+#define GT64260_WINDOW_SIZE_MIN			0x00100000
+#define MV64360_WINDOW_SIZE_MIN			0x00010000
+
+#define	MV64x60_TCLK_FREQ_MAX			133333333U
+
+/* IRQ's for embedded controllers */
+#define	MV64x60_IRQ_DEV				1
+#define	MV64x60_IRQ_CPU_ERR			3
+#define	MV64x60_IRQ_TIMER_0_1			8
+#define	MV64x60_IRQ_TIMER_2_3			9
+#define	MV64x60_IRQ_TIMER_4_5			10
+#define	MV64x60_IRQ_TIMER_6_7			11
+#define	MV64x60_IRQ_P1_GPP_0_7			24
+#define	MV64x60_IRQ_P1_GPP_8_15			25
+#define	MV64x60_IRQ_P1_GPP_16_23		26
+#define	MV64x60_IRQ_P1_GPP_24_31		27
+#define	MV64x60_IRQ_DOORBELL			28
+#define	MV64x60_IRQ_ETH_0			32
+#define	MV64x60_IRQ_ETH_1			33
+#define	MV64x60_IRQ_ETH_2			34
+#define	MV64x60_IRQ_SDMA_0			36
+#define	MV64x60_IRQ_I2C				37
+#define	MV64x60_IRQ_BRG				39
+#define	MV64x60_IRQ_MPSC_0			40
+#define	MV64x60_IRQ_MPSC_1			42
+#define	MV64x60_IRQ_COMM			43
+#define	MV64x60_IRQ_P0_GPP_0_7			56
+#define	MV64x60_IRQ_P0_GPP_8_15			57
+#define	MV64x60_IRQ_P0_GPP_16_23		58
+#define	MV64x60_IRQ_P0_GPP_24_31		59
+
+#define	MV64360_IRQ_PCI0			12
+#define	MV64360_IRQ_SRAM_PAR_ERR		13
+#define	MV64360_IRQ_PCI1			16
+#define	MV64360_IRQ_SDMA_1			38
+
+#define	MV64x60_IRQ_GPP0			64
+#define	MV64x60_IRQ_GPP1			65
+#define	MV64x60_IRQ_GPP2			66
+#define	MV64x60_IRQ_GPP3			67
+#define	MV64x60_IRQ_GPP4			68
+#define	MV64x60_IRQ_GPP5			69
+#define	MV64x60_IRQ_GPP6			70
+#define	MV64x60_IRQ_GPP7			71
+#define	MV64x60_IRQ_GPP8			72
+#define	MV64x60_IRQ_GPP9			73
+#define	MV64x60_IRQ_GPP10			74
+#define	MV64x60_IRQ_GPP11			75
+#define	MV64x60_IRQ_GPP12			76
+#define	MV64x60_IRQ_GPP13			77
+#define	MV64x60_IRQ_GPP14			78
+#define	MV64x60_IRQ_GPP15			79
+#define	MV64x60_IRQ_GPP16			80
+#define	MV64x60_IRQ_GPP17			81
+#define	MV64x60_IRQ_GPP18			82
+#define	MV64x60_IRQ_GPP19			83
+#define	MV64x60_IRQ_GPP20			84
+#define	MV64x60_IRQ_GPP21			85
+#define	MV64x60_IRQ_GPP22			86
+#define	MV64x60_IRQ_GPP23			87
+#define	MV64x60_IRQ_GPP24			88
+#define	MV64x60_IRQ_GPP25			89
+#define	MV64x60_IRQ_GPP26			90
+#define	MV64x60_IRQ_GPP27			91
+#define	MV64x60_IRQ_GPP28			92
+#define	MV64x60_IRQ_GPP29			93
+#define	MV64x60_IRQ_GPP30			94
+#define	MV64x60_IRQ_GPP31			95
+
+/* Offsets for register blocks */
+#define	GT64260_ENET_PHY_ADDR			0x2000
+#define	GT64260_ENET_ESMIR			0x2010
+#define GT64260_ENET_0_OFFSET			0x2400
+#define GT64260_ENET_1_OFFSET			0x2800
+#define GT64260_ENET_2_OFFSET			0x2c00
+#define	MV64x60_SDMA_0_OFFSET			0x4000
+#define	MV64x60_SDMA_1_OFFSET			0x6000
+#define	MV64x60_MPSC_0_OFFSET			0x8000
+#define	MV64x60_MPSC_1_OFFSET			0x9000
+#define	MV64x60_MPSC_ROUTING_OFFSET		0xb400
+#define	MV64x60_SDMA_INTR_OFFSET		0xb800
+#define	MV64x60_BRG_0_OFFSET			0xb200
+#define	MV64x60_BRG_1_OFFSET			0xb208
+
+/*
+ *****************************************************************************
+ *
+ *	CPU Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* CPU physical address of bridge's registers */
+#define MV64x60_INTERNAL_SPACE_DECODE		0x0068
+#define MV64x60_INTERNAL_SPACE_SIZE		0x10000
+#define MV64x60_INTERNAL_SPACE_DEFAULT_ADDR	0x14000000
+
+#define	MV64360_CPU_BAR_ENABLE			0x0278
+
+/* CPU Memory Controller Window Registers (4 windows) */
+#define	MV64x60_CPU2MEM_WINDOWS			4
+
+#define	MV64x60_CPU2MEM_0_BASE			0x0008
+#define	MV64x60_CPU2MEM_0_SIZE			0x0010
+#define	MV64x60_CPU2MEM_1_BASE			0x0208
+#define	MV64x60_CPU2MEM_1_SIZE			0x0210
+#define	MV64x60_CPU2MEM_2_BASE			0x0018
+#define	MV64x60_CPU2MEM_2_SIZE			0x0020
+#define	MV64x60_CPU2MEM_3_BASE			0x0218
+#define	MV64x60_CPU2MEM_3_SIZE			0x0220
+
+/* CPU Device Controller Window Registers (4 windows) */
+#define	MV64x60_CPU2DEV_WINDOWS			4
+
+#define	MV64x60_CPU2DEV_0_BASE			0x0028
+#define	MV64x60_CPU2DEV_0_SIZE			0x0030
+#define	MV64x60_CPU2DEV_1_BASE			0x0228
+#define	MV64x60_CPU2DEV_1_SIZE			0x0230
+#define	MV64x60_CPU2DEV_2_BASE			0x0248
+#define	MV64x60_CPU2DEV_2_SIZE			0x0250
+#define	MV64x60_CPU2DEV_3_BASE			0x0038
+#define	MV64x60_CPU2DEV_3_SIZE			0x0040
+
+#define	MV64x60_CPU2BOOT_0_BASE			0x0238
+#define	MV64x60_CPU2BOOT_0_SIZE			0x0240
+
+#define	MV64360_CPU2SRAM_BASE			0x0268
+
+/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
+#define	MV64x60_PCI_BUSES			2
+#define	MV64x60_PCI_IO_WINDOWS_PER_BUS		1
+#define	MV64x60_PCI_MEM_WINDOWS_PER_BUS		4
+
+#define	MV64x60_CPU2PCI_SWAP_BYTE		0x00000000
+#define	MV64x60_CPU2PCI_SWAP_NONE		0x01000000
+#define	MV64x60_CPU2PCI_SWAP_BYTE_WORD		0x02000000
+#define	MV64x60_CPU2PCI_SWAP_WORD		0x03000000
+
+#define	MV64x60_CPU2PCI_MEM_REQ64		(1<<27)
+
+#define	MV64x60_CPU2PCI0_IO_BASE		0x0048
+#define	MV64x60_CPU2PCI0_IO_SIZE		0x0050
+#define	MV64x60_CPU2PCI0_MEM_0_BASE		0x0058
+#define	MV64x60_CPU2PCI0_MEM_0_SIZE		0x0060
+#define	MV64x60_CPU2PCI0_MEM_1_BASE		0x0080
+#define	MV64x60_CPU2PCI0_MEM_1_SIZE		0x0088
+#define	MV64x60_CPU2PCI0_MEM_2_BASE		0x0258
+#define	MV64x60_CPU2PCI0_MEM_2_SIZE		0x0260
+#define	MV64x60_CPU2PCI0_MEM_3_BASE		0x0280
+#define	MV64x60_CPU2PCI0_MEM_3_SIZE		0x0288
+
+#define	MV64x60_CPU2PCI0_IO_REMAP		0x00f0
+#define	MV64x60_CPU2PCI0_MEM_0_REMAP_LO		0x00f8
+#define	MV64x60_CPU2PCI0_MEM_0_REMAP_HI		0x0320
+#define	MV64x60_CPU2PCI0_MEM_1_REMAP_LO		0x0100
+#define	MV64x60_CPU2PCI0_MEM_1_REMAP_HI		0x0328
+#define	MV64x60_CPU2PCI0_MEM_2_REMAP_LO		0x02f8
+#define	MV64x60_CPU2PCI0_MEM_2_REMAP_HI		0x0330
+#define	MV64x60_CPU2PCI0_MEM_3_REMAP_LO		0x0300
+#define	MV64x60_CPU2PCI0_MEM_3_REMAP_HI		0x0338
+
+#define	MV64x60_CPU2PCI1_IO_BASE		0x0090
+#define	MV64x60_CPU2PCI1_IO_SIZE		0x0098
+#define	MV64x60_CPU2PCI1_MEM_0_BASE		0x00a0
+#define	MV64x60_CPU2PCI1_MEM_0_SIZE		0x00a8
+#define	MV64x60_CPU2PCI1_MEM_1_BASE		0x00b0
+#define	MV64x60_CPU2PCI1_MEM_1_SIZE		0x00b8
+#define	MV64x60_CPU2PCI1_MEM_2_BASE		0x02a0
+#define	MV64x60_CPU2PCI1_MEM_2_SIZE		0x02a8
+#define	MV64x60_CPU2PCI1_MEM_3_BASE		0x02b0
+#define	MV64x60_CPU2PCI1_MEM_3_SIZE		0x02b8
+
+#define	MV64x60_CPU2PCI1_IO_REMAP		0x0108
+#define	MV64x60_CPU2PCI1_MEM_0_REMAP_LO		0x0110
+#define	MV64x60_CPU2PCI1_MEM_0_REMAP_HI		0x0340
+#define	MV64x60_CPU2PCI1_MEM_1_REMAP_LO		0x0118
+#define	MV64x60_CPU2PCI1_MEM_1_REMAP_HI		0x0348
+#define	MV64x60_CPU2PCI1_MEM_2_REMAP_LO		0x0310
+#define	MV64x60_CPU2PCI1_MEM_2_REMAP_HI		0x0350
+#define	MV64x60_CPU2PCI1_MEM_3_REMAP_LO		0x0318
+#define	MV64x60_CPU2PCI1_MEM_3_REMAP_HI		0x0358
+
+/* CPU Control Registers */
+#define MV64x60_CPU_CONFIG			0x0000
+#define MV64x60_CPU_MODE			0x0120
+#define MV64x60_CPU_MASTER_CNTL			0x0160
+#define MV64x60_CPU_XBAR_CNTL_LO		0x0150
+#define MV64x60_CPU_XBAR_CNTL_HI		0x0158
+#define MV64x60_CPU_XBAR_TO			0x0168
+
+#define GT64260_CPU_RR_XBAR_CNTL_LO		0x0170
+#define GT64260_CPU_RR_XBAR_CNTL_HI		0x0178
+
+#define MV64360_CPU_PADS_CALIBRATION		0x03b4
+#define MV64360_CPU_RESET_SAMPLE_LO		0x03c4
+#define MV64360_CPU_RESET_SAMPLE_HI		0x03d4
+
+/* SMP Register Map */
+#define MV64360_WHO_AM_I			0x0200
+#define MV64360_CPU0_DOORBELL			0x0214
+#define MV64360_CPU0_DOORBELL_CLR		0x021c
+#define MV64360_CPU0_DOORBELL_MASK		0x0234
+#define MV64360_CPU1_DOORBELL			0x0224
+#define MV64360_CPU1_DOORBELL_CLR		0x022c
+#define MV64360_CPU1_DOORBELL_MASK		0x023c
+#define MV64360_CPUx_DOORBELL(x)		(0x0214 + ((x)*0x10))
+#define MV64360_CPUx_DOORBELL_CLR(x)		(0x021c + ((x)*0x10))
+#define MV64360_CPUx_DOORBELL_MASK(x)		(0x0234 + ((x)*0x08))
+#define MV64360_SEMAPHORE_0			0x0244
+#define MV64360_SEMAPHORE_1			0x024c
+#define MV64360_SEMAPHORE_2			0x0254
+#define MV64360_SEMAPHORE_3			0x025c
+#define MV64360_SEMAPHORE_4			0x0264
+#define MV64360_SEMAPHORE_5			0x026c
+#define MV64360_SEMAPHORE_6			0x0274
+#define MV64360_SEMAPHORE_7			0x027c
+
+/* CPU Sync Barrier Registers */
+#define GT64260_CPU_SYNC_BARRIER_PCI0		0x00c0
+#define GT64260_CPU_SYNC_BARRIER_PCI1		0x00c8
+
+#define MV64360_CPU0_SYNC_BARRIER_TRIG		0x00c0
+#define MV64360_CPU0_SYNC_BARRIER_VIRT		0x00c8
+#define MV64360_CPU1_SYNC_BARRIER_TRIG		0x00d0
+#define MV64360_CPU1_SYNC_BARRIER_VIRT		0x00d8
+
+/* CPU Deadlock and Ordering registers (Rev B part only) */
+#define GT64260_CPU_DEADLOCK_ORDERING			0x02d0
+#define GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH		0x02d8
+#define GT64260_CPU_COUNTERS_SYNC_BARRIER_ATTRIBUTE	0x02e0
+
+/* CPU Access Protection Registers (gt64260 realy has 8 but don't need) */
+#define	MV64x260_CPU_PROT_WINDOWS		4
+
+#define	GT64260_CPU_PROT_ACCPROTECT		(1<<16)
+#define	GT64260_CPU_PROT_WRPROTECT		(1<<17)
+#define	GT64260_CPU_PROT_CACHEPROTECT		(1<<18)
+
+#define	MV64360_CPU_PROT_ACCPROTECT		(1<<20)
+#define	MV64360_CPU_PROT_WRPROTECT		(1<<21)
+#define	MV64360_CPU_PROT_CACHEPROTECT		(1<<22)
+#define	MV64360_CPU_PROT_WIN_ENABLE		(1<<31)
+
+#define MV64x60_CPU_PROT_BASE_0			0x0180
+#define MV64x60_CPU_PROT_SIZE_0			0x0188
+#define MV64x60_CPU_PROT_BASE_1			0x0190
+#define MV64x60_CPU_PROT_SIZE_1			0x0198
+#define MV64x60_CPU_PROT_BASE_2			0x01a0
+#define MV64x60_CPU_PROT_SIZE_2			0x01a8
+#define MV64x60_CPU_PROT_BASE_3			0x01b0
+#define MV64x60_CPU_PROT_SIZE_3			0x01b8
+
+#define GT64260_CPU_PROT_BASE_4			0x01c0
+#define GT64260_CPU_PROT_SIZE_4			0x01c8
+#define GT64260_CPU_PROT_BASE_5			0x01d0
+#define GT64260_CPU_PROT_SIZE_5			0x01d8
+#define GT64260_CPU_PROT_BASE_6			0x01e0
+#define GT64260_CPU_PROT_SIZE_6			0x01e8
+#define GT64260_CPU_PROT_BASE_7			0x01f0
+#define GT64260_CPU_PROT_SIZE_7			0x01f8
+
+/* CPU Snoop Control Registers (64260 only) */
+#define	GT64260_CPU_SNOOP_WINDOWS		4
+
+#define	GT64260_CPU_SNOOP_NONE			0x00000000
+#define	GT64260_CPU_SNOOP_WT			0x00010000
+#define	GT64260_CPU_SNOOP_WB			0x00020000
+#define	GT64260_CPU_SNOOP_MASK			0x00030000
+#define	GT64260_CPU_SNOOP_ALL_BITS		GT64260_CPU_SNOOP_MASK
+
+#define GT64260_CPU_SNOOP_BASE_0		0x0380
+#define GT64260_CPU_SNOOP_SIZE_0		0x0388
+#define GT64260_CPU_SNOOP_BASE_1		0x0390
+#define GT64260_CPU_SNOOP_SIZE_1		0x0398
+#define GT64260_CPU_SNOOP_BASE_2		0x03a0
+#define GT64260_CPU_SNOOP_SIZE_2		0x03a8
+#define GT64260_CPU_SNOOP_BASE_3		0x03b0
+#define GT64260_CPU_SNOOP_SIZE_3		0x03b8
+
+/* CPU Snoop Control Registers (64360 only) */
+#define	MV64360_CPU_SNOOP_WINDOWS		4
+#define	MV64360_CPU_SNOOP_NONE			0x00000000
+#define	MV64360_CPU_SNOOP_WT			0x00010000
+#define	MV64360_CPU_SNOOP_WB			0x00020000
+#define	MV64360_CPU_SNOOP_MASK			0x00030000
+#define	MV64360_CPU_SNOOP_ALL_BITS		MV64360_CPU_SNOOP_MASK
+
+
+/* CPU Error Report Registers */
+#define MV64x60_CPU_ERR_ADDR_LO			0x0070
+#define MV64x60_CPU_ERR_ADDR_HI			0x0078
+#define MV64x60_CPU_ERR_DATA_LO			0x0128
+#define MV64x60_CPU_ERR_DATA_HI			0x0130
+#define MV64x60_CPU_ERR_PARITY			0x0138
+#define MV64x60_CPU_ERR_CAUSE			0x0140
+#define MV64x60_CPU_ERR_MASK			0x0148
+
+/*
+ *****************************************************************************
+ *
+ *	SRAM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+#define	MV64360_SRAM_CONFIG			0x0380
+#define	MV64360_SRAM_TEST_MODE			0x03f4
+#define	MV64360_SRAM_ERR_CAUSE			0x0388
+#define	MV64360_SRAM_ERR_ADDR_LO		0x0390
+#define	MV64360_SRAM_ERR_ADDR_HI		0x03f8
+#define	MV64360_SRAM_ERR_DATA_LO		0x0398
+#define	MV64360_SRAM_ERR_DATA_HI		0x03a0
+#define	MV64360_SRAM_ERR_PARITY			0x03a8
+
+#define	MV64360_SRAM_SIZE			0x00040000 /* 2Mb/256KB SRAM */
+
+/*
+ *****************************************************************************
+ *
+ *	SDRAM/MEM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* SDRAM Config Registers (64260) */
+#define	GT64260_SDRAM_CONFIG			0x0448
+
+/* SDRAM Error Report Registers (64260) */
+#define	GT64260_SDRAM_ERR_DATA_LO		0x0484
+#define	GT64260_SDRAM_ERR_DATA_HI		0x0480
+#define	GT64260_SDRAM_ERR_ADDR			0x0490
+#define	GT64260_SDRAM_ERR_ECC_RCVD		0x0488
+#define	GT64260_SDRAM_ERR_ECC_CALC		0x048c
+#define	GT64260_SDRAM_ERR_ECC_CNTL		0x0494
+#define	GT64260_SDRAM_ERR_ECC_ERR_CNT		0x0498
+
+/* SDRAM Config Registers (64360) */
+#define	MV64360_SDRAM_CONFIG			0x1400
+
+/* SDRAM Control Registers */
+#define MV64360_D_UNIT_CONTROL_LOW		0x1404
+#define MV64360_D_UNIT_CONTROL_HIGH		0x1424
+
+/* SDRAM Error Report Registers (64360) */
+#define	MV64360_SDRAM_ERR_DATA_LO		0x1444
+#define	MV64360_SDRAM_ERR_DATA_HI		0x1440
+#define	MV64360_SDRAM_ERR_ADDR			0x1450
+#define	MV64360_SDRAM_ERR_ECC_RCVD		0x1448
+#define	MV64360_SDRAM_ERR_ECC_CALC		0x144c
+#define	MV64360_SDRAM_ERR_ECC_CNTL		0x1454
+#define	MV64360_SDRAM_ERR_ECC_ERR_CNT		0x1458
+
+/*
+ *****************************************************************************
+ *
+ *	Device/BOOT Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* Device Control Registers */
+#define	MV64x60_DEV_BANK_PARAMS_0		0x045c
+#define	MV64x60_DEV_BANK_PARAMS_1		0x0460
+#define	MV64x60_DEV_BANK_PARAMS_2		0x0464
+#define	MV64x60_DEV_BANK_PARAMS_3		0x0468
+#define	MV64x60_DEV_BOOT_PARAMS			0x046c
+#define	MV64x60_DEV_IF_CNTL			0x04c0
+#define	MV64x60_DEV_IF_XBAR_CNTL_LO		0x04c8
+#define	MV64x60_DEV_IF_XBAR_CNTL_HI		0x04cc
+#define	MV64x60_DEV_IF_XBAR_CNTL_TO		0x04c4
+
+/* Device Interrupt Registers */
+#define	MV64x60_DEV_INTR_CAUSE			0x04d0
+#define	MV64x60_DEV_INTR_MASK			0x04d4
+#define	MV64x60_DEV_INTR_ERR_ADDR		0x04d8
+
+#define	MV64360_DEV_INTR_ERR_DATA		0x04dc
+#define	MV64360_DEV_INTR_ERR_PAR		0x04e0
+
+/*
+ *****************************************************************************
+ *
+ *	PCI Bridge Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* PCI Configuration Access Registers */
+#define	MV64x60_PCI0_CONFIG_ADDR		0x0cf8
+#define	MV64x60_PCI0_CONFIG_DATA		0x0cfc
+#define	MV64x60_PCI0_IACK			0x0c34
+
+#define	MV64x60_PCI1_CONFIG_ADDR		0x0c78
+#define	MV64x60_PCI1_CONFIG_DATA		0x0c7c
+#define	MV64x60_PCI1_IACK			0x0cb4
+
+/* PCI Control Registers */
+#define	MV64x60_PCI0_CMD			0x0c00
+#define	MV64x60_PCI0_MODE			0x0d00
+#define	MV64x60_PCI0_TO_RETRY			0x0c04
+#define	MV64x60_PCI0_RD_BUF_DISCARD_TIMER	0x0d04
+#define	MV64x60_PCI0_MSI_TRIGGER_TIMER		0x0c38
+#define	MV64x60_PCI0_ARBITER_CNTL		0x1d00
+#define	MV64x60_PCI0_XBAR_CNTL_LO		0x1d08
+#define	MV64x60_PCI0_XBAR_CNTL_HI		0x1d0c
+#define	MV64x60_PCI0_XBAR_CNTL_TO		0x1d04
+#define	MV64x60_PCI0_RD_RESP_XBAR_CNTL_LO	0x1d18
+#define	MV64x60_PCI0_RD_RESP_XBAR_CNTL_HI	0x1d1c
+#define	MV64x60_PCI0_SYNC_BARRIER		0x1d10
+#define	MV64x60_PCI0_P2P_CONFIG			0x1d14
+#define	MV64x60_PCI0_INTR_MASK
+
+#define	GT64260_PCI0_P2P_SWAP_CNTL		0x1d54
+
+#define	MV64x60_PCI1_CMD			0x0c80
+#define	MV64x60_PCI1_MODE			0x0d80
+#define	MV64x60_PCI1_TO_RETRY			0x0c84
+#define	MV64x60_PCI1_RD_BUF_DISCARD_TIMER	0x0d84
+#define	MV64x60_PCI1_MSI_TRIGGER_TIMER		0x0cb8
+#define	MV64x60_PCI1_ARBITER_CNTL		0x1d80
+#define	MV64x60_PCI1_XBAR_CNTL_LO		0x1d88
+#define	MV64x60_PCI1_XBAR_CNTL_HI		0x1d8c
+#define	MV64x60_PCI1_XBAR_CNTL_TO		0x1d84
+#define	MV64x60_PCI1_RD_RESP_XBAR_CNTL_LO	0x1d98
+#define	MV64x60_PCI1_RD_RESP_XBAR_CNTL_HI	0x1d9c
+#define	MV64x60_PCI1_SYNC_BARRIER		0x1d90
+#define	MV64x60_PCI1_P2P_CONFIG			0x1d94
+
+#define	GT64260_PCI1_P2P_SWAP_CNTL		0x1dd4
+
+/* Different modes that the pci hoses can be in (bits 5:4 in PCI Mode reg) */
+#define	MV64x60_PCIMODE_CONVENTIONAL		0
+#define	MV64x60_PCIMODE_PCIX_66			(1 << 4)
+#define	MV64x60_PCIMODE_PCIX_100		(2 << 4)
+#define	MV64x60_PCIMODE_PCIX_133		(3 << 4)
+#define	MV64x60_PCIMODE_MASK			(0x3 << 4)
+
+/* PCI Access Control Regions Registers */
+#define	GT64260_PCI_ACC_CNTL_PREFETCHEN		(1<<12)
+#define	GT64260_PCI_ACC_CNTL_DREADEN		(1<<13)
+#define	GT64260_PCI_ACC_CNTL_RDPREFETCH		(1<<16)
+#define	GT64260_PCI_ACC_CNTL_RDLINEPREFETCH	(1<<17)
+#define	GT64260_PCI_ACC_CNTL_RDMULPREFETCH	(1<<18)
+#define	GT64260_PCI_ACC_CNTL_MBURST_32_BTYES	0x00000000
+#define	GT64260_PCI_ACC_CNTL_MBURST_64_BYTES	0x00100000
+#define	GT64260_PCI_ACC_CNTL_MBURST_128_BYTES	0x00200000
+#define	GT64260_PCI_ACC_CNTL_MBURST_MASK	0x00300000
+#define	GT64260_PCI_ACC_CNTL_SWAP_BYTE		0x00000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_NONE		0x01000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD	0x02000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_WORD		0x03000000
+#define	GT64260_PCI_ACC_CNTL_SWAP_MASK		0x03000000
+#define	GT64260_PCI_ACC_CNTL_ACCPROT		(1<<28)
+#define	GT64260_PCI_ACC_CNTL_WRPROT		(1<<29)
+
+#define	GT64260_PCI_ACC_CNTL_ALL_BITS	(GT64260_PCI_ACC_CNTL_PREFETCHEN |    \
+					 GT64260_PCI_ACC_CNTL_DREADEN |       \
+					 GT64260_PCI_ACC_CNTL_RDPREFETCH |    \
+					 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
+					 GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
+					 GT64260_PCI_ACC_CNTL_MBURST_MASK |   \
+					 GT64260_PCI_ACC_CNTL_SWAP_MASK |     \
+					 GT64260_PCI_ACC_CNTL_ACCPROT|        \
+					 GT64260_PCI_ACC_CNTL_WRPROT)
+
+#define	MV64360_PCI_ACC_CNTL_ENABLE		(1<<0)
+#define	MV64360_PCI_ACC_CNTL_REQ64		(1<<1)
+#define	MV64360_PCI_ACC_CNTL_SNOOP_NONE		0x00000000
+#define	MV64360_PCI_ACC_CNTL_SNOOP_WT		0x00000004
+#define	MV64360_PCI_ACC_CNTL_SNOOP_WB		0x00000008
+#define	MV64360_PCI_ACC_CNTL_SNOOP_MASK		0x0000000c
+#define	MV64360_PCI_ACC_CNTL_ACCPROT		(1<<4)
+#define	MV64360_PCI_ACC_CNTL_WRPROT		(1<<5)
+#define	MV64360_PCI_ACC_CNTL_SWAP_BYTE		0x00000000
+#define	MV64360_PCI_ACC_CNTL_SWAP_NONE		0x00000040
+#define	MV64360_PCI_ACC_CNTL_SWAP_BYTE_WORD	0x00000080
+#define	MV64360_PCI_ACC_CNTL_SWAP_WORD		0x000000c0
+#define	MV64360_PCI_ACC_CNTL_SWAP_MASK		0x000000c0
+#define	MV64360_PCI_ACC_CNTL_MBURST_32_BYTES	0x00000000
+#define	MV64360_PCI_ACC_CNTL_MBURST_64_BYTES	0x00000100
+#define	MV64360_PCI_ACC_CNTL_MBURST_128_BYTES	0x00000200
+#define	MV64360_PCI_ACC_CNTL_MBURST_MASK	0x00000300
+#define	MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES	0x00000000
+#define	MV64360_PCI_ACC_CNTL_RDSIZE_64_BYTES	0x00000400
+#define	MV64360_PCI_ACC_CNTL_RDSIZE_128_BYTES	0x00000800
+#define	MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES	0x00000c00
+#define	MV64360_PCI_ACC_CNTL_RDSIZE_MASK	0x00000c00
+
+#define	MV64360_PCI_ACC_CNTL_ALL_BITS	(MV64360_PCI_ACC_CNTL_ENABLE |	    \
+					 MV64360_PCI_ACC_CNTL_REQ64 |	    \
+					 MV64360_PCI_ACC_CNTL_SNOOP_MASK |  \
+					 MV64360_PCI_ACC_CNTL_ACCPROT |	    \
+					 MV64360_PCI_ACC_CNTL_WRPROT |	    \
+					 MV64360_PCI_ACC_CNTL_SWAP_MASK |   \
+					 MV64360_PCI_ACC_CNTL_MBURST_MASK | \
+					 MV64360_PCI_ACC_CNTL_RDSIZE_MASK)
+
+#define	MV64x60_PCI0_ACC_CNTL_0_BASE_LO		0x1e00
+#define	MV64x60_PCI0_ACC_CNTL_0_BASE_HI		0x1e04
+#define	MV64x60_PCI0_ACC_CNTL_0_SIZE		0x1e08
+#define	MV64x60_PCI0_ACC_CNTL_1_BASE_LO		0x1e10
+#define	MV64x60_PCI0_ACC_CNTL_1_BASE_HI		0x1e14
+#define	MV64x60_PCI0_ACC_CNTL_1_SIZE		0x1e18
+#define	MV64x60_PCI0_ACC_CNTL_2_BASE_LO		0x1e20
+#define	MV64x60_PCI0_ACC_CNTL_2_BASE_HI		0x1e24
+#define	MV64x60_PCI0_ACC_CNTL_2_SIZE		0x1e28
+#define	MV64x60_PCI0_ACC_CNTL_3_BASE_LO		0x1e30
+#define	MV64x60_PCI0_ACC_CNTL_3_BASE_HI		0x1e34
+#define	MV64x60_PCI0_ACC_CNTL_3_SIZE		0x1e38
+#define	MV64x60_PCI0_ACC_CNTL_4_BASE_LO		0x1e40
+#define	MV64x60_PCI0_ACC_CNTL_4_BASE_HI		0x1e44
+#define	MV64x60_PCI0_ACC_CNTL_4_SIZE		0x1e48
+#define	MV64x60_PCI0_ACC_CNTL_5_BASE_LO		0x1e50
+#define	MV64x60_PCI0_ACC_CNTL_5_BASE_HI		0x1e54
+#define	MV64x60_PCI0_ACC_CNTL_5_SIZE		0x1e58
+
+#define	GT64260_PCI0_ACC_CNTL_6_BASE_LO		0x1e60
+#define	GT64260_PCI0_ACC_CNTL_6_BASE_HI		0x1e64
+#define	GT64260_PCI0_ACC_CNTL_6_SIZE		0x1e68
+#define	GT64260_PCI0_ACC_CNTL_7_BASE_LO		0x1e70
+#define	GT64260_PCI0_ACC_CNTL_7_BASE_HI		0x1e74
+#define	GT64260_PCI0_ACC_CNTL_7_SIZE		0x1e78
+
+#define	MV64x60_PCI1_ACC_CNTL_0_BASE_LO		0x1e80
+#define	MV64x60_PCI1_ACC_CNTL_0_BASE_HI		0x1e84
+#define	MV64x60_PCI1_ACC_CNTL_0_SIZE		0x1e88
+#define	MV64x60_PCI1_ACC_CNTL_1_BASE_LO		0x1e90
+#define	MV64x60_PCI1_ACC_CNTL_1_BASE_HI		0x1e94
+#define	MV64x60_PCI1_ACC_CNTL_1_SIZE		0x1e98
+#define	MV64x60_PCI1_ACC_CNTL_2_BASE_LO		0x1ea0
+#define	MV64x60_PCI1_ACC_CNTL_2_BASE_HI		0x1ea4
+#define	MV64x60_PCI1_ACC_CNTL_2_SIZE		0x1ea8
+#define	MV64x60_PCI1_ACC_CNTL_3_BASE_LO		0x1eb0
+#define	MV64x60_PCI1_ACC_CNTL_3_BASE_HI		0x1eb4
+#define	MV64x60_PCI1_ACC_CNTL_3_SIZE		0x1eb8
+#define	MV64x60_PCI1_ACC_CNTL_4_BASE_LO		0x1ec0
+#define	MV64x60_PCI1_ACC_CNTL_4_BASE_HI		0x1ec4
+#define	MV64x60_PCI1_ACC_CNTL_4_SIZE		0x1ec8
+#define	MV64x60_PCI1_ACC_CNTL_5_BASE_LO		0x1ed0
+#define	MV64x60_PCI1_ACC_CNTL_5_BASE_HI		0x1ed4
+#define	MV64x60_PCI1_ACC_CNTL_5_SIZE		0x1ed8
+
+#define	GT64260_PCI1_ACC_CNTL_6_BASE_LO		0x1ee0
+#define	GT64260_PCI1_ACC_CNTL_6_BASE_HI		0x1ee4
+#define	GT64260_PCI1_ACC_CNTL_6_SIZE		0x1ee8
+#define	GT64260_PCI1_ACC_CNTL_7_BASE_LO		0x1ef0
+#define	GT64260_PCI1_ACC_CNTL_7_BASE_HI		0x1ef4
+#define	GT64260_PCI1_ACC_CNTL_7_SIZE		0x1ef8
+
+/* PCI Snoop Control Registers (64260 only) */
+#define	GT64260_PCI_SNOOP_NONE			0x00000000
+#define	GT64260_PCI_SNOOP_WT			0x00001000
+#define	GT64260_PCI_SNOOP_WB			0x00002000
+
+#define	GT64260_PCI0_SNOOP_0_BASE_LO		0x1f00
+#define	GT64260_PCI0_SNOOP_0_BASE_HI		0x1f04
+#define	GT64260_PCI0_SNOOP_0_SIZE		0x1f08
+#define	GT64260_PCI0_SNOOP_1_BASE_LO		0x1f10
+#define	GT64260_PCI0_SNOOP_1_BASE_HI		0x1f14
+#define	GT64260_PCI0_SNOOP_1_SIZE		0x1f18
+#define	GT64260_PCI0_SNOOP_2_BASE_LO		0x1f20
+#define	GT64260_PCI0_SNOOP_2_BASE_HI		0x1f24
+#define	GT64260_PCI0_SNOOP_2_SIZE		0x1f28
+#define	GT64260_PCI0_SNOOP_3_BASE_LO		0x1f30
+#define	GT64260_PCI0_SNOOP_3_BASE_HI		0x1f34
+#define	GT64260_PCI0_SNOOP_3_SIZE		0x1f38
+
+#define	GT64260_PCI1_SNOOP_0_BASE_LO		0x1f80
+#define	GT64260_PCI1_SNOOP_0_BASE_HI		0x1f84
+#define	GT64260_PCI1_SNOOP_0_SIZE		0x1f88
+#define	GT64260_PCI1_SNOOP_1_BASE_LO		0x1f90
+#define	GT64260_PCI1_SNOOP_1_BASE_HI		0x1f94
+#define	GT64260_PCI1_SNOOP_1_SIZE		0x1f98
+#define	GT64260_PCI1_SNOOP_2_BASE_LO		0x1fa0
+#define	GT64260_PCI1_SNOOP_2_BASE_HI		0x1fa4
+#define	GT64260_PCI1_SNOOP_2_SIZE		0x1fa8
+#define	GT64260_PCI1_SNOOP_3_BASE_LO		0x1fb0
+#define	GT64260_PCI1_SNOOP_3_BASE_HI		0x1fb4
+#define	GT64260_PCI1_SNOOP_3_SIZE		0x1fb8
+
+/* PCI Error Report Registers */
+#define MV64x60_PCI0_ERR_SERR_MASK		0x0c28
+#define MV64x60_PCI0_ERR_ADDR_LO		0x1d40
+#define MV64x60_PCI0_ERR_ADDR_HI		0x1d44
+#define MV64x60_PCI0_ERR_DATA_LO		0x1d48
+#define MV64x60_PCI0_ERR_DATA_HI		0x1d4c
+#define MV64x60_PCI0_ERR_CMD			0x1d50
+#define MV64x60_PCI0_ERR_CAUSE			0x1d58
+#define MV64x60_PCI0_ERR_MASK			0x1d5c
+
+#define MV64x60_PCI1_ERR_SERR_MASK		0x0ca8
+#define MV64x60_PCI1_ERR_ADDR_LO		0x1dc0
+#define MV64x60_PCI1_ERR_ADDR_HI		0x1dc4
+#define MV64x60_PCI1_ERR_DATA_LO		0x1dc8
+#define MV64x60_PCI1_ERR_DATA_HI		0x1dcc
+#define MV64x60_PCI1_ERR_CMD			0x1dd0
+#define MV64x60_PCI1_ERR_CAUSE			0x1dd8
+#define MV64x60_PCI1_ERR_MASK			0x1ddc
+
+/* PCI Slave Address Decoding Registers */
+#define	MV64x60_PCI0_MEM_0_SIZE			0x0c08
+#define	MV64x60_PCI0_MEM_1_SIZE			0x0d08
+#define	MV64x60_PCI0_MEM_2_SIZE			0x0c0c
+#define	MV64x60_PCI0_MEM_3_SIZE			0x0d0c
+#define	MV64x60_PCI1_MEM_0_SIZE			0x0c88
+#define	MV64x60_PCI1_MEM_1_SIZE			0x0d88
+#define	MV64x60_PCI1_MEM_2_SIZE			0x0c8c
+#define	MV64x60_PCI1_MEM_3_SIZE			0x0d8c
+
+#define	MV64x60_PCI0_BAR_ENABLE			0x0c3c
+#define	MV64x60_PCI1_BAR_ENABLE			0x0cbc
+
+#define	MV64x60_PCI0_PCI_DECODE_CNTL		0x0d3c
+#define	MV64x60_PCI1_PCI_DECODE_CNTL		0x0dbc
+
+#define	MV64x60_PCI0_SLAVE_MEM_0_REMAP		0x0c48
+#define	MV64x60_PCI0_SLAVE_MEM_1_REMAP		0x0d48
+#define	MV64x60_PCI0_SLAVE_MEM_2_REMAP		0x0c4c
+#define	MV64x60_PCI0_SLAVE_MEM_3_REMAP		0x0d4c
+#define	MV64x60_PCI0_SLAVE_DEV_0_REMAP		0x0c50
+#define	MV64x60_PCI0_SLAVE_DEV_1_REMAP		0x0d50
+#define	MV64x60_PCI0_SLAVE_DEV_2_REMAP		0x0d58
+#define	MV64x60_PCI0_SLAVE_DEV_3_REMAP		0x0c54
+#define	MV64x60_PCI0_SLAVE_BOOT_REMAP		0x0d54
+#define	MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_LO	0x0d5c
+#define	MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_HI	0x0d60
+#define	MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_LO	0x0d64
+#define	MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_HI	0x0d68
+#define	MV64x60_PCI0_SLAVE_P2P_IO_REMAP		0x0d6c
+#define	MV64x60_PCI0_SLAVE_CPU_REMAP		0x0d70
+
+#define	MV64x60_PCI1_SLAVE_MEM_0_REMAP		0x0cc8
+#define	MV64x60_PCI1_SLAVE_MEM_1_REMAP		0x0dc8
+#define	MV64x60_PCI1_SLAVE_MEM_2_REMAP		0x0ccc
+#define	MV64x60_PCI1_SLAVE_MEM_3_REMAP		0x0dcc
+#define	MV64x60_PCI1_SLAVE_DEV_0_REMAP		0x0cd0
+#define	MV64x60_PCI1_SLAVE_DEV_1_REMAP		0x0dd0
+#define	MV64x60_PCI1_SLAVE_DEV_2_REMAP		0x0dd8
+#define	MV64x60_PCI1_SLAVE_DEV_3_REMAP		0x0cd4
+#define	MV64x60_PCI1_SLAVE_BOOT_REMAP		0x0dd4
+#define	MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_LO	0x0ddc
+#define	MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_HI	0x0de0
+#define	MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_LO	0x0de4
+#define	MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_HI	0x0de8
+#define	MV64x60_PCI1_SLAVE_P2P_IO_REMAP		0x0dec
+#define	MV64x60_PCI1_SLAVE_CPU_REMAP		0x0df0
+
+/*
+ *****************************************************************************
+ *
+ *	ENET Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* ENET Controller Window Registers (6 windows) */
+#define	MV64360_ENET2MEM_WINDOWS		6
+
+#define	MV64360_ENET2MEM_0_BASE			0x2200
+#define	MV64360_ENET2MEM_0_SIZE			0x2204
+#define	MV64360_ENET2MEM_1_BASE			0x2208
+#define	MV64360_ENET2MEM_1_SIZE			0x220c
+#define	MV64360_ENET2MEM_2_BASE			0x2210
+#define	MV64360_ENET2MEM_2_SIZE			0x2214
+#define	MV64360_ENET2MEM_3_BASE			0x2218
+#define	MV64360_ENET2MEM_3_SIZE			0x221c
+#define	MV64360_ENET2MEM_4_BASE			0x2220
+#define	MV64360_ENET2MEM_4_SIZE			0x2224
+#define	MV64360_ENET2MEM_5_BASE			0x2228
+#define	MV64360_ENET2MEM_5_SIZE			0x222c
+
+#define	MV64360_ENET2MEM_SNOOP_NONE		0x00000000
+#define	MV64360_ENET2MEM_SNOOP_WT		0x00001000
+#define	MV64360_ENET2MEM_SNOOP_WB		0x00002000
+
+#define	MV64360_ENET2MEM_BAR_ENABLE		0x2290
+
+#define	MV64360_ENET2MEM_ACC_PROT_0		0x2294
+#define	MV64360_ENET2MEM_ACC_PROT_1		0x2298
+#define	MV64360_ENET2MEM_ACC_PROT_2		0x229c
+
+/*
+ *****************************************************************************
+ *
+ *	MPSC Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* MPSC Controller Window Registers (4 windows) */
+#define	MV64360_MPSC2MEM_WINDOWS		4
+
+#define	MV64360_MPSC2MEM_0_BASE			0xf200
+#define	MV64360_MPSC2MEM_0_SIZE			0xf204
+#define	MV64360_MPSC2MEM_1_BASE			0xf208
+#define	MV64360_MPSC2MEM_1_SIZE			0xf20c
+#define	MV64360_MPSC2MEM_2_BASE			0xf210
+#define	MV64360_MPSC2MEM_2_SIZE			0xf214
+#define	MV64360_MPSC2MEM_3_BASE			0xf218
+#define	MV64360_MPSC2MEM_3_SIZE			0xf21c
+
+#define MV64360_MPSC_0_REMAP			0xf240
+#define MV64360_MPSC_1_REMAP			0xf244
+
+#define	MV64360_MPSC2MEM_SNOOP_NONE		0x00000000
+#define	MV64360_MPSC2MEM_SNOOP_WT		0x00001000
+#define	MV64360_MPSC2MEM_SNOOP_WB		0x00002000
+
+#define	MV64360_MPSC2MEM_BAR_ENABLE		0xf250
+
+#define	MV64360_MPSC2MEM_ACC_PROT_0		0xf254
+#define	MV64360_MPSC2MEM_ACC_PROT_1		0xf258
+
+#define	MV64360_MPSC2REGS_BASE			0xf25c
+
+/*
+ *****************************************************************************
+ *
+ *	Timer/Counter Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	MV64x60_TIMR_CNTR_0			0x0850
+#define	MV64x60_TIMR_CNTR_1			0x0854
+#define	MV64x60_TIMR_CNTR_2			0x0858
+#define	MV64x60_TIMR_CNTR_3			0x085c
+#define	MV64x60_TIMR_CNTR_0_3_CNTL		0x0864
+#define	MV64x60_TIMR_CNTR_0_3_INTR_CAUSE	0x0868
+#define	MV64x60_TIMR_CNTR_0_3_INTR_MASK		0x086c
+
+#define	GT64260_TIMR_CNTR_4			0x0950
+#define	GT64260_TIMR_CNTR_5			0x0954
+#define	GT64260_TIMR_CNTR_6			0x0958
+#define	GT64260_TIMR_CNTR_7			0x095c
+#define	GT64260_TIMR_CNTR_4_7_CNTL		0x0964
+#define	GT64260_TIMR_CNTR_4_7_INTR_CAUSE	0x0968
+#define	GT64260_TIMR_CNTR_4_7_INTR_MASK		0x096c
+
+/*
+ *****************************************************************************
+ *
+ *	Communications Controller
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_SER_INIT_PCI_ADDR_HI		0xf320
+#define	GT64260_SER_INIT_LAST_DATA		0xf324
+#define	GT64260_SER_INIT_CONTROL		0xf328
+#define	GT64260_SER_INIT_STATUS			0xf32c
+
+#define	MV64x60_COMM_ARBITER_CNTL		0xf300
+#define	MV64x60_COMM_CONFIG			0xb40c
+#define	MV64x60_COMM_XBAR_TO			0xf304
+#define	MV64x60_COMM_INTR_CAUSE			0xf310
+#define	MV64x60_COMM_INTR_MASK			0xf314
+#define	MV64x60_COMM_ERR_ADDR			0xf318
+
+#define MV64360_COMM_ARBITER_CNTL		0xf300
+
+/*
+ *****************************************************************************
+ *
+ *	IDMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* IDMA Controller Window Registers (8 windows) */
+#define	MV64360_IDMA2MEM_WINDOWS		8
+
+#define	MV64360_IDMA2MEM_0_BASE			0x0a00
+#define	MV64360_IDMA2MEM_0_SIZE			0x0a04
+#define	MV64360_IDMA2MEM_1_BASE			0x0a08
+#define	MV64360_IDMA2MEM_1_SIZE			0x0a0c
+#define	MV64360_IDMA2MEM_2_BASE			0x0a10
+#define	MV64360_IDMA2MEM_2_SIZE			0x0a14
+#define	MV64360_IDMA2MEM_3_BASE			0x0a18
+#define	MV64360_IDMA2MEM_3_SIZE			0x0a1c
+#define	MV64360_IDMA2MEM_4_BASE			0x0a20
+#define	MV64360_IDMA2MEM_4_SIZE			0x0a24
+#define	MV64360_IDMA2MEM_5_BASE			0x0a28
+#define	MV64360_IDMA2MEM_5_SIZE			0x0a2c
+#define	MV64360_IDMA2MEM_6_BASE			0x0a30
+#define	MV64360_IDMA2MEM_6_SIZE			0x0a34
+#define	MV64360_IDMA2MEM_7_BASE			0x0a38
+#define	MV64360_IDMA2MEM_7_SIZE			0x0a3c
+
+#define	MV64360_IDMA2MEM_SNOOP_NONE		0x00000000
+#define	MV64360_IDMA2MEM_SNOOP_WT		0x00001000
+#define	MV64360_IDMA2MEM_SNOOP_WB		0x00002000
+
+#define	MV64360_IDMA2MEM_BAR_ENABLE		0x0a80
+
+#define	MV64360_IDMA2MEM_ACC_PROT_0		0x0a70
+#define	MV64360_IDMA2MEM_ACC_PROT_1		0x0a74
+#define	MV64360_IDMA2MEM_ACC_PROT_2		0x0a78
+#define	MV64360_IDMA2MEM_ACC_PROT_3		0x0a7c
+
+#define	MV64x60_IDMA_0_OFFSET			0x0800
+#define	MV64x60_IDMA_1_OFFSET			0x0804
+#define	MV64x60_IDMA_2_OFFSET			0x0808
+#define	MV64x60_IDMA_3_OFFSET			0x080c
+#define	MV64x60_IDMA_4_OFFSET			0x0900
+#define	MV64x60_IDMA_5_OFFSET			0x0904
+#define	MV64x60_IDMA_6_OFFSET			0x0908
+#define	MV64x60_IDMA_7_OFFSET			0x090c
+
+#define	MV64x60_IDMA_BYTE_COUNT			(0x0800 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_SRC_ADDR			(0x0810 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_DST_ADDR			(0x0820 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_NEXT_DESC			(0x0830 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_CUR_DESC			(0x0870 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_SRC_PCI_ADDR_HI		(0x0890 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_DST_PCI_ADDR_HI		(0x08a0 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_NEXT_DESC_PCI_ADDR_HI	(0x08b0 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_CONTROL_LO			(0x0840 - MV64x60_IDMA_0_OFFSET)
+#define	MV64x60_IDMA_CONTROL_HI			(0x0880 - MV64x60_IDMA_0_OFFSET)
+
+#define	MV64x60_IDMA_0_3_ARBITER_CNTL		0x0860
+#define	MV64x60_IDMA_4_7_ARBITER_CNTL		0x0960
+
+#define	MV64x60_IDMA_0_3_XBAR_TO		0x08d0
+#define	MV64x60_IDMA_4_7_XBAR_TO		0x09d0
+
+#define	MV64x60_IDMA_0_3_INTR_CAUSE		0x08c0
+#define	MV64x60_IDMA_0_3_INTR_MASK		0x08c4
+#define	MV64x60_IDMA_0_3_ERROR_ADDR		0x08c8
+#define	MV64x60_IDMA_0_3_ERROR_SELECT		0x08cc
+#define	MV64x60_IDMA_4_7_INTR_CAUSE		0x09c0
+#define	MV64x60_IDMA_4_7_INTR_MASK		0x09c4
+#define	MV64x60_IDMA_4_7_ERROR_ADDR		0x09c8
+#define	MV64x60_IDMA_4_7_ERROR_SELECT		0x09cc
+
+/*
+ *****************************************************************************
+ *
+ *	Watchdog Timer Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	MV64x60_WDT_WDC				0xb410
+#define	MV64x60_WDT_WDV				0xb414
+
+
+/*
+ *****************************************************************************
+ *
+ *	 General Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	MV64x60_GPP_IO_CNTL			0xf100
+#define	MV64x60_GPP_LEVEL_CNTL			0xf110
+#define	MV64x60_GPP_VALUE			0xf104
+#define	MV64x60_GPP_INTR_CAUSE			0xf108
+#define	MV64x60_GPP_INTR_MASK			0xf10c
+#define	MV64x60_GPP_VALUE_SET			0xf118
+#define	MV64x60_GPP_VALUE_CLR			0xf11c
+
+
+/*
+ *****************************************************************************
+ *
+ *	Multi-Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	MV64x60_MPP_CNTL_0			0xf000
+#define	MV64x60_MPP_CNTL_1			0xf004
+#define	MV64x60_MPP_CNTL_2			0xf008
+#define	MV64x60_MPP_CNTL_3			0xf00c
+#define	GT64260_MPP_SERIAL_PORTS_MULTIPLEX	0xf010
+
+#define MV64x60_ETH_BAR_GAP			0x8
+#define MV64x60_ETH_SIZE_REG_GAP		0x8
+#define MV64x60_ETH_HIGH_ADDR_REMAP_REG_GAP	0x4
+#define MV64x60_ETH_PORT_ACCESS_CTRL_GAP	0x4
+
+#define MV64x60_EBAR_ATTR_DRAM_CS0		0x00000E00
+#define MV64x60_EBAR_ATTR_DRAM_CS1		0x00000D00
+#define MV64x60_EBAR_ATTR_DRAM_CS2		0x00000B00
+#define MV64x60_EBAR_ATTR_DRAM_CS3		0x00000700
+
+#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK0	0x00000000
+#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK1	0x00000100
+#define MV64x60_EBAR_ATTR_CBS_SRAM		0x00000000
+#define MV64x60_EBAR_ATTR_CBS_CPU_BUS		0x00000800
+
+
+/*
+ *****************************************************************************
+ *
+ *	Interrupt Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define	GT64260_IC_OFFSET			0x0c18
+
+#define	GT64260_IC_MAIN_CAUSE_LO		0x0c18
+#define	GT64260_IC_MAIN_CAUSE_HI		0x0c68
+#define	GT64260_IC_CPU_INTR_MASK_LO		0x0c1c
+#define	GT64260_IC_CPU_INTR_MASK_HI		0x0c6c
+#define	GT64260_IC_CPU_SELECT_CAUSE		0x0c70
+#define	GT64260_IC_PCI0_INTR_MASK_LO		0x0c24
+#define	GT64260_IC_PCI0_INTR_MASK_HI		0x0c64
+#define	GT64260_IC_PCI0_SELECT_CAUSE		0x0c74
+#define	GT64260_IC_PCI1_INTR_MASK_LO		0x0ca4
+#define	GT64260_IC_PCI1_INTR_MASK_HI		0x0ce4
+#define	GT64260_IC_PCI1_SELECT_CAUSE		0x0cf4
+#define	GT64260_IC_CPU_INT_0_MASK		0x0e60
+#define	GT64260_IC_CPU_INT_1_MASK		0x0e64
+#define	GT64260_IC_CPU_INT_2_MASK		0x0e68
+#define	GT64260_IC_CPU_INT_3_MASK		0x0e6c
+
+#define	MV64360_IC_OFFSET			0x0000
+
+#define	MV64360_IC_MAIN_CAUSE_LO		0x0004
+#define	MV64360_IC_MAIN_CAUSE_HI		0x000c
+#define	MV64360_IC_CPU0_INTR_MASK_LO		0x0014
+#define	MV64360_IC_CPU0_INTR_MASK_HI		0x001c
+#define	MV64360_IC_CPU0_SELECT_CAUSE		0x0024
+#define	MV64360_IC_CPU1_INTR_MASK_LO		0x0034
+#define	MV64360_IC_CPU1_INTR_MASK_HI		0x003c
+#define	MV64360_IC_CPU1_SELECT_CAUSE		0x0044
+#define	MV64360_IC_INT0_MASK_LO			0x0054
+#define	MV64360_IC_INT0_MASK_HI			0x005c
+#define	MV64360_IC_INT0_SELECT_CAUSE		0x0064
+#define	MV64360_IC_INT1_MASK_LO			0x0074
+#define	MV64360_IC_INT1_MASK_HI			0x007c
+#define	MV64360_IC_INT1_SELECT_CAUSE		0x0084
+
+#endif /* __ASMPPC_MV64x60_DEFS_H */
diff --git a/include/asm-ppc/namei.h b/include/asm-ppc/namei.h
new file mode 100644
index 000000000000..29c9ec832133
--- /dev/null
+++ b/include/asm-ppc/namei.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-ppc/namei.h
+ * Adapted from include/asm-alpha/namei.h
+ *
+ * Included from fs/namei.c
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_NAMEI_H
+#define __PPC_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __PPC_NAMEI_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/nvram.h b/include/asm-ppc/nvram.h
new file mode 100644
index 000000000000..31ef16e3fc4f
--- /dev/null
+++ b/include/asm-ppc/nvram.h
@@ -0,0 +1,73 @@
+/*
+ * PreP compliant NVRAM access
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_NVRAM_H
+#define _PPC_NVRAM_H
+
+#define NVRAM_AS0  0x74
+#define NVRAM_AS1  0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS		0x1FF9
+#define MOTO_RTC_MINUTES		0x1FFA
+#define MOTO_RTC_HOURS		0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK		0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
+#define MOTO_RTC_MONTH		0x1FFE
+#define MOTO_RTC_YEAR		0x1FFF
+#define MOTO_RTC_CONTROLA            0x1FF8
+#define MOTO_RTC_CONTROLB            0x1FF9
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+/* Return partition offset in nvram */
+extern int	pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8	pmac_xpram_read(int xpaddr);
+extern void	pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern void	nvram_sync(void);
+
+/* Normal access to NVRAM */
+extern unsigned char nvram_read_byte(int i);
+extern void nvram_write_byte(unsigned char c, int i);
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h
new file mode 100644
index 000000000000..5ea44cabfaa4
--- /dev/null
+++ b/include/asm-ppc/ocp.h
@@ -0,0 +1,211 @@
+/*
+ * ocp.h
+ *
+ *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *          Mipsys - France
+ *
+ *          Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ *          Additional support and port to 2.6 LDM/sysfs by
+ *          Matt Porter <mporter@kernel.crashing.org>
+ *          Copyright 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ *  TODO: - Add get/put interface & fixup locking to provide same API for
+ *          2.4 and 2.5
+ *	  - Rework PM callbacks
+ */
+
+#ifdef __KERNEL__
+#ifndef __OCP_H__
+#define __OCP_H__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/config.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/device.h>
+
+#include <asm/mmu.h>
+#include <asm/ocp_ids.h>
+#include <asm/rwsem.h>
+#include <asm/semaphore.h>
+
+#ifdef CONFIG_PPC_OCP
+
+#define OCP_MAX_IRQS	7
+#define MAX_EMACS	4
+#define OCP_IRQ_NA	-1	/* used when ocp device does not have an irq */
+#define OCP_IRQ_MUL	-2	/* used for ocp devices with multiply irqs */
+#define OCP_NULL_TYPE	-1	/* used to mark end of list */
+#define OCP_CPM_NA	0	/* No Clock or Power Management avaliable */
+#define OCP_PADDR_NA	0	/* No MMIO registers */
+
+#define OCP_ANY_ID	(~0)
+#define OCP_ANY_INDEX	-1
+
+extern struct list_head 	ocp_devices;
+extern struct rw_semaphore	ocp_devices_sem;
+
+struct ocp_device_id {
+	unsigned int	vendor, function;	/* Vendor and function ID or OCP_ANY_ID */
+	unsigned long	driver_data;		/* Data private to the driver */
+};
+
+
+/*
+ * Static definition of an OCP device.
+ *
+ * @vendor:    Vendor code. It is _STRONGLY_ discouraged to use
+ *             the vendor code as a way to match a unique device,
+ *             though I kept that possibility open, you should
+ *             really define different function codes for different
+ *             device types
+ * @function:  This is the function code for this device.
+ * @index:     This index is used for mapping the Nth function of a
+ *             given core. This is typically used for cross-driver
+ *             matching, like looking for a given MAL or ZMII from
+ *             an EMAC or for getting to the proper set of DCRs.
+ *             Indices are no longer magically calculated based on
+ *             structure ordering, they have to be actually coded
+ *             into the ocp_def to avoid any possible confusion
+ *             I _STRONGLY_ (again ? wow !) encourage anybody relying
+ *             on index mapping to encode the "target" index in an
+ *             associated structure pointed to by "additions", see
+ *             how it's done for the EMAC driver.
+ * @paddr:     Device physical address (may not mean anything...)
+ * @irq:       Interrupt line for this device (TODO: think about making
+ *             an array with this)
+ * @pm:        Currently, contains the bitmask in CPMFR DCR for the device
+ * @additions: Optionally points to a function specific structure
+ *             providing additional informations for a given device
+ *             instance. It's currently used by the EMAC driver for MAL
+ *             channel & ZMII port mapping among others.
+ * @show:      Optionally points to a function specific structure
+ *             providing a sysfs show routine for additions fields.
+ */
+struct ocp_def {
+	unsigned int	vendor;
+	unsigned int	function;
+	int		index;
+	phys_addr_t	paddr;
+	int	  	irq;
+	unsigned long	pm;
+	void		*additions;
+	void		(*show)(struct device *);
+};
+
+
+/* Struct for a given device instance */
+struct ocp_device {
+	struct list_head	link;
+	char			name[80];	/* device name */
+	struct ocp_def		*def;		/* device definition */
+	void			*drvdata;	/* driver data for this device */
+	struct ocp_driver	*driver;
+	u32			current_state;	/* Current operating state. In ACPI-speak,
+						   this is D0-D3, D0 being fully functional,
+						   and D3 being off. */
+	struct			device dev;
+};
+
+struct ocp_driver {
+	struct list_head node;
+	char *name;
+	const struct ocp_device_id *id_table;	/* NULL if wants all devices */
+	int  (*probe)  (struct ocp_device *dev);	/* New device inserted */
+	void (*remove) (struct ocp_device *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
+	int  (*suspend) (struct ocp_device *dev, u32 state);	/* Device suspended */
+	int  (*resume) (struct ocp_device *dev);	                /* Device woken up */
+	struct device_driver driver;
+};
+
+#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
+#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver)
+
+/* Similar to the helpers above, these manipulate per-ocp_dev
+ * driver-specific data.  Currently stored as ocp_dev::ocpdev,
+ * a void pointer, but it is not present on older kernels.
+ */
+static inline void *
+ocp_get_drvdata(struct ocp_device *pdev)
+{
+	return pdev->drvdata;
+}
+
+static inline void
+ocp_set_drvdata(struct ocp_device *pdev, void *data)
+{
+	pdev->drvdata = data;
+}
+
+#if defined (CONFIG_PM)
+/*
+ * This is right for the IBM 405 and 440 but will need to be
+ * generalized if the OCP stuff gets used on other processors.
+ */
+static inline void
+ocp_force_power_off(struct ocp_device *odev)
+{
+	mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm);
+}
+
+static inline void
+ocp_force_power_on(struct ocp_device *odev)
+{
+	mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm);
+}
+#else
+#define ocp_force_power_off(x)	(void)(x)
+#define ocp_force_power_on(x)	(void)(x)
+#endif
+
+/* Register/Unregister an OCP driver */
+extern int ocp_register_driver(struct ocp_driver *drv);
+extern void ocp_unregister_driver(struct ocp_driver *drv);
+
+/* Build list of devices */
+extern int ocp_early_init(void) __init;
+
+/* Find a device by index */
+extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index);
+
+/* Get a def by index */
+extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Add a device by index */
+extern int ocp_add_one_device(struct ocp_def *def);
+
+/* Remove a device by index */
+extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Iterate over devices and execute a routine */
+extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg);
+
+/* Sysfs support */
+#define OCP_SYSFS_ADDTL(type, format, name, field)			\
+static ssize_t								\
+show_##name##_##field(struct device *dev, char *buf)			\
+{									\
+	struct ocp_device *odev = to_ocp_dev(dev);			\
+	type *add = odev->def->additions;				\
+									\
+	return sprintf(buf, format, add->field);			\
+}									\
+static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL);
+
+#ifdef CONFIG_IBM_OCP
+#include <asm/ibm_ocp.h>
+#endif
+
+#ifdef CONFIG_FSL_OCP
+#include <asm/fsl_ocp.h>
+#endif
+
+#endif				/* CONFIG_PPC_OCP */
+#endif				/* __OCP_H__ */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ocp_ids.h b/include/asm-ppc/ocp_ids.h
new file mode 100644
index 000000000000..8ae4b311a37c
--- /dev/null
+++ b/include/asm-ppc/ocp_ids.h
@@ -0,0 +1,73 @@
+/*
+ * ocp_ids.h
+ *
+ * OCP device ids based on the ideas from PCI
+ *
+ * The numbers below are almost completely arbitrary, and in fact
+ * strings might work better.  -- paulus
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * Vender  device
+ * [xxxx]  [xxxx]
+ *
+ *  Keep in order, please
+ */
+
+/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */
+
+#define	OCP_VENDOR_INVALID	0x0000
+#define	OCP_VENDOR_ARM		0x0004
+#define OCP_VENDOR_FREESCALE	0x1057
+#define OCP_VENDOR_IBM		0x1014
+#define OCP_VENDOR_MOTOROLA	OCP_VENDOR_FREESCALE
+#define	OCP_VENDOR_XILINX	0x10ee
+#define	OCP_VENDOR_UNKNOWN	0xFFFF
+
+/* device identification */
+
+/* define type */
+#define OCP_FUNC_INVALID	0x0000
+
+/* system 0x0001 - 0x001F */
+
+/* Timers 0x0020 - 0x002F */
+
+/* Serial 0x0030 - 0x006F*/
+#define OCP_FUNC_16550		0x0031
+#define OCP_FUNC_IIC		0x0032
+#define OCP_FUNC_USB		0x0033
+#define OCP_FUNC_PSC_UART	0x0034
+
+/* Memory devices 0x0090 - 0x009F */
+#define OCP_FUNC_MAL		0x0090
+#define OCP_FUNC_DMA		0x0091
+
+/* Display 0x00A0 - 0x00AF */
+
+/* Sound 0x00B0 - 0x00BF */
+
+/* Mass Storage 0x00C0 - 0xxCF */
+#define OCP_FUNC_IDE		0x00C0
+
+/* Misc 0x00D0 - 0x00DF*/
+#define OCP_FUNC_GPIO		0x00D0
+#define OCP_FUNC_ZMII		0x00D1
+#define OCP_FUNC_PERFMON	0x00D2	/* Performance Monitor */
+#define OCP_FUNC_RGMII		0x00D3
+#define OCP_FUNC_TAH		0x00D4
+#define OCP_FUNC_SEC2		0x00D5	/* Crypto/Security 2.0 */
+
+/* Network 0x0200 - 0x02FF */
+#define OCP_FUNC_EMAC		0x0200
+#define OCP_FUNC_GFAR		0x0201	/* TSEC & FEC */
+
+/* Bridge devices 0xE00 - 0xEFF */
+#define OCP_FUNC_OPB		0x0E00
+
+#define OCP_FUNC_UNKNOWN	0xFFFF
diff --git a/include/asm-ppc/of_device.h b/include/asm-ppc/of_device.h
new file mode 100644
index 000000000000..14441c629010
--- /dev/null
+++ b/include/asm-ppc/of_device.h
@@ -0,0 +1,74 @@
+#ifndef __OF_DEVICE_H__
+#define __OF_DEVICE_H__
+
+#include <linux/device.h>
+#include <asm/prom.h>
+
+/*
+ * The of_platform_bus_type is a bus type used by drivers that do not
+ * attach to a macio or similar bus but still use OF probing
+ * mecanism
+ */
+extern struct bus_type of_platform_bus_type;
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties
+ */
+struct of_device
+{
+	struct device_node	*node;		/* OF device node */
+	u64			dma_mask;	/* DMA mask */
+	struct device		dev;		/* Generic device interface */
+};
+#define	to_of_device(d) container_of(d, struct of_device, dev)
+
+/*
+ * Struct used for matching a device
+ */
+struct of_match
+{
+	char	*name;
+	char	*type;
+	char	*compatible;
+	void	*data;
+};
+#define OF_ANY_MATCH		((char *)-1L)
+
+extern const struct of_match *of_match_device(
+	const struct of_match *matches, const struct of_device *dev);
+
+extern struct of_device *of_dev_get(struct of_device *dev);
+extern void of_dev_put(struct of_device *dev);
+
+/*
+ * An of_platform_driver driver is attached to a basic of_device on
+ * the "platform bus" (of_platform_bus_type)
+ */
+struct of_platform_driver
+{
+	char			*name;
+	struct of_match		*match_table;
+	struct module		*owner;
+
+	int	(*probe)(struct of_device* dev, const struct of_match *match);
+	int	(*remove)(struct of_device* dev);
+
+	int	(*suspend)(struct of_device* dev, u32 state);
+	int	(*resume)(struct of_device* dev);
+	int	(*shutdown)(struct of_device* dev);
+
+	struct device_driver	driver;
+};
+#define	to_of_platform_driver(drv) container_of(drv,struct of_platform_driver, driver)
+
+extern int of_register_driver(struct of_platform_driver *drv);
+extern void of_unregister_driver(struct of_platform_driver *drv);
+extern int of_device_register(struct of_device *ofdev);
+extern void of_device_unregister(struct of_device *ofdev);
+extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id);
+extern void of_release_dev(struct device *dev);
+
+#endif /* __OF_DEVICE_H__ */
+
diff --git a/include/asm-ppc/ohare.h b/include/asm-ppc/ohare.h
new file mode 100644
index 000000000000..023b59772231
--- /dev/null
+++ b/include/asm-ppc/ohare.h
@@ -0,0 +1,48 @@
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ *       check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR	0x34
+#define OHARE_FCR	0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET		1
+#define OH_BAY_POWER_N		2	/* a guess */
+#define OH_BAY_PCI_ENABLE	4	/* a guess */
+#define OH_BAY_IDE_ENABLE	8
+#define OH_BAY_FLOPPY_ENABLE	0x10
+#define OH_IDE0_ENABLE		0x20
+#define OH_IDE0_RESET_N		0x40	/* a guess */
+#define OH_BAY_DEV_MASK		0x1c
+#define OH_BAY_RESET_N		0x80
+#define OH_IOBUS_ENABLE		0x100	/* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE		0x200
+#define OH_MESH_ENABLE		0x400
+#define OH_FLOPPY_ENABLE	0x800
+#define OH_SCCA_IO		0x4000
+#define OH_SCCB_IO		0x8000
+#define OH_VIA_ENABLE		0x10000	/* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N		0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES		(OH_IDE_ENABLE | OH_SCC_ENABLE | \
+				 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES	0xbeff7a
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
new file mode 100644
index 000000000000..58545e4cdbc0
--- /dev/null
+++ b/include/asm-ppc/open_pic.h
@@ -0,0 +1,93 @@
+/*
+ *  include/asm-ppc/open_pic.h -- OpenPIC Interrupt Handling
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ *
+ */
+
+#ifndef _PPC_KERNEL_OPEN_PIC_H
+#define _PPC_KERNEL_OPEN_PIC_H
+
+#include <linux/config.h>
+#include <linux/irq.h>
+
+#define OPENPIC_SIZE	0x40000
+
+/*
+ *  Non-offset'ed vector numbers
+ */
+
+#define OPENPIC_VEC_TIMER	110	/* and up */
+#define OPENPIC_VEC_IPI		118	/* and up */
+#define OPENPIC_VEC_SPURIOUS	255
+
+/* OpenPIC IRQ controller structure */
+extern struct hw_interrupt_type open_pic;
+
+/* OpenPIC IPI controller structure */
+#ifdef CONFIG_SMP
+extern struct hw_interrupt_type open_pic_ipi;
+#endif /* CONFIG_SMP */
+
+extern u_int OpenPIC_NumInitSenses;
+extern u_char *OpenPIC_InitSenses;
+extern void __iomem * OpenPIC_Addr;
+extern int epic_serial_mode;
+
+/* Exported functions */
+extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
+extern void openpic_init(int linux_irq_offset);
+extern void openpic_init_nmi_irq(u_int irq);
+extern void openpic_hookup_cascade(u_int irq, char *name,
+				   int (*cascade_fn)(struct pt_regs *));
+extern u_int openpic_irq(void);
+extern void openpic_eoi(void);
+extern void openpic_request_IPIs(void);
+extern void do_openpic_setup_cpu(void);
+extern int openpic_get_irq(struct pt_regs *regs);
+extern void openpic_reset_processor_phys(u_int cpumask);
+extern void openpic_setup_ISU(int isu_num, unsigned long addr);
+extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask);
+extern void smp_openpic_message_pass(int target, int msg, unsigned long data,
+				     int wait);
+extern void openpic_set_k2_cascade(int irq);
+extern void openpic_set_priority(u_int pri);
+
+extern inline int openpic_to_irq(int irq)
+{
+	/* IRQ 0 usually means 'disabled'.. don't mess with it
+	 * exceptions to this (sandpoint maybe?)
+	 * shouldn't use openpic_to_irq
+	 */
+	if (irq != 0){
+		return irq += NUM_8259_INTERRUPTS;
+	} else {
+		return 0;
+	}
+}
+/* Support for second openpic on G5 macs */
+
+// FIXME: To be replaced by sane cascaded controller management */
+
+#define PMAC_OPENPIC2_OFFSET	128
+
+#define OPENPIC2_VEC_TIMER	110	/* and up */
+#define OPENPIC2_VEC_IPI	118	/* and up */
+#define OPENPIC2_VEC_SPURIOUS	127
+
+
+extern void* OpenPIC2_Addr;
+
+/* Exported functions */
+extern void openpic2_set_sources(int first_irq, int num_irqs, void *isr);
+extern void openpic2_init(int linux_irq_offset);
+extern void openpic2_init_nmi_irq(u_int irq);
+extern u_int openpic2_irq(void);
+extern void openpic2_eoi(void);
+extern int openpic2_get_irq(struct pt_regs *regs);
+extern void openpic2_setup_ISU(int isu_num, unsigned long addr);
+#endif /* _PPC_KERNEL_OPEN_PIC_H */
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
new file mode 100644
index 000000000000..4789dc024240
--- /dev/null
+++ b/include/asm-ppc/page.h
@@ -0,0 +1,169 @@
+#ifndef _PPC_PAGE_H
+#define _PPC_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+
+/*
+ * Subtle: this is an int (not an unsigned long) and so it
+ * gets extended to 64 bits the way want (i.e. with 1s).  -- paulus
+ */
+#define PAGE_MASK	(~((1 << PAGE_SHIFT) - 1))
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+
+/* This must match what is in arch/ppc/Makefile */
+#define PAGE_OFFSET	CONFIG_KERNEL_START
+#define KERNELBASE	PAGE_OFFSET
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
+ * physical addressing.  For now this just the IBM PPC440.
+ */
+#ifdef CONFIG_PTE_64BIT
+typedef unsigned long long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 3)	/* 512 ptes per page */
+#define PTE_FMT		"%16Lx"
+#else
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#define PTE_FMT		"%.8lx"
+#endif
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pte_basic_t pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef pte_basic_t pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pmd(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif
+
+
+/* align addr on a size boundary - adjust address up if needed -- Cort */
+#define _ALIGN(addr,size)	(((addr)+(size)-1)&(~((size)-1)))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+struct page;
+extern void clear_pages(void *page, int order);
+static inline void clear_page(void *page) { clear_pages(page, 0); }
+extern void copy_page(void *to, void *from);
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr,
+			   struct page *pg);
+
+#ifndef CONFIG_APUS
+#define PPC_MEMSTART	0
+#define PPC_PGSTART	0
+#define PPC_MEMOFFSET	PAGE_OFFSET
+#else
+extern unsigned long ppc_memstart;
+extern unsigned long ppc_pgstart;
+extern unsigned long ppc_memoffset;
+#define PPC_MEMSTART	ppc_memstart
+#define PPC_PGSTART	ppc_pgstart
+#define PPC_MEMOFFSET	ppc_memoffset
+#endif
+
+#if defined(CONFIG_APUS) && !defined(MODULE)
+/* map phys->virtual and virtual->phys for RAM pages */
+static inline unsigned long ___pa(unsigned long v)
+{
+	unsigned long p;
+	asm volatile ("1: addis %0, %1, %2;"
+		      ".section \".vtop_fixup\",\"aw\";"
+		      ".align  1;"
+		      ".long   1b;"
+		      ".previous;"
+		      : "=r" (p)
+		      : "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff));
+
+	return p;
+}
+static inline void* ___va(unsigned long p)
+{
+	unsigned long v;
+	asm volatile ("1: addis %0, %1, %2;"
+		      ".section \".ptov_fixup\",\"aw\";"
+		      ".align  1;"
+		      ".long   1b;"
+		      ".previous;"
+		      : "=r" (v)
+		      : "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff));
+
+	return (void*) v;
+}
+#else
+#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
+#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
+#endif
+
+extern int page_is_ram(unsigned long pfn);
+
+#define __pa(x) ___pa((unsigned long)(x))
+#define __va(x) ((void *)(___va((unsigned long)(x))))
+
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - PPC_PGSTART))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PPC_PGSTART)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_virt(page)	__va(page_to_pfn(page) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)		(((pfn) - PPC_PGSTART) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int lz;
+
+	size = (size-1) >> PAGE_SHIFT;
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+	return 32 - lz;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_PAGE_H */
diff --git a/include/asm-ppc/param.h b/include/asm-ppc/param.h
new file mode 100644
index 000000000000..b24a4e37196a
--- /dev/null
+++ b/include/asm-ppc/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_PPC_PARAM_H
+#define _ASM_PPC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		1000		/* internal timer frequency */
+#define USER_HZ		100		/* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-ppc/parport.h b/include/asm-ppc/parport.h
new file mode 100644
index 000000000000..11f96d3de5b6
--- /dev/null
+++ b/include/asm-ppc/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_PPC_PARPORT_H
+#define _ASM_PPC_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_PPC_PARPORT_H) */
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
new file mode 100644
index 000000000000..fa9cbb67ce3e
--- /dev/null
+++ b/include/asm-ppc/pc_serial.h
@@ -0,0 +1,127 @@
+/*
+ * include/asm-ppc/pc_serial.h
+ *
+ * This is basically a copy of include/asm-i386/serial.h.
+ * It is used on platforms which have an ISA bus and thus are likely
+ * to have PC-style serial ports at the legacy I/O port addresses.
+ * It also includes the definitions for the fourport, accent, boca
+ * and hub6 multiport serial cards, although I have never heard of
+ * anyone using any of those on a PPC platform.  -- paulus
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE  64
+#else
+#define RS_TABLE_SIZE  4
+#endif
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#endif
+	
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS		\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS		\
+	HUB6_SERIAL_PORT_DFNS
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
new file mode 100644
index 000000000000..78e9be619f14
--- /dev/null
+++ b/include/asm-ppc/pci-bridge.h
@@ -0,0 +1,136 @@
+#ifdef __KERNEL__
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pci_io_base returns the memory address at which you can access
+ * the I/O space for PCI bus number `bus' (or NULL on error).
+ */
+extern void *pci_bus_io_base(unsigned int bus);
+extern unsigned long pci_bus_io_base_phys(unsigned int bus);
+extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
+
+/* Allocate a new PCI host bridge structure */
+extern struct pci_controller* pcibios_alloc_controller(void);
+
+/* Helper function for setting up resources */
+extern void pci_init_resource(struct resource *res, unsigned long start,
+			      unsigned long end, int flags, char *name);
+
+/* Get the PCI host controller for a bus */
+extern struct pci_controller* pci_bus_to_hose(int bus);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			   struct device_node *dev, int primary);
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;			/* PCI domain number */
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	void *arch_data;
+
+	int first_busno;
+	int last_busno;
+	int bus_offset;
+
+	void *io_base_virt;
+	unsigned long io_base_phys;
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	unsigned long pci_mem_offset;
+
+	struct pci_ops *ops;
+	volatile unsigned int __iomem *cfg_addr;
+	volatile void __iomem *cfg_data;
+	/*
+	 * If set, indirect method will set the cfg_type bit as
+	 * needed to generate type 1 configuration transactions.
+	 */
+	int set_cfg_type;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int mem_resource_count;
+
+	/* Host bridge I/O and Memory space
+	 * Used for BAR placement algorithms
+	 */
+	struct resource io_space;
+	struct resource mem_space;
+};
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+			   int where, u8 *val);
+int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
+			   int where, u16 *val);
+int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u32 *val);
+int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u8 val);
+int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u16 val);
+int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+			     int where, u32 val);
+
+extern void setup_indirect_pci_nomap(struct pci_controller* hose,
+			       void __iomem *cfg_addr, void __iomem *cfg_data);
+extern void setup_indirect_pci(struct pci_controller* hose,
+			       u32 cfg_addr, u32 cfg_data);
+extern void setup_grackle(struct pci_controller *hose);
+
+extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
+
+/*
+ *   The following code swizzles for exactly one bridge.  The routine
+ *   common_swizzle below handles multiple bridges.  But there are a
+ *   some boards that don't follow the PCI spec's suggestion so we
+ *   break this piece out separately.
+ */
+static inline unsigned char bridge_swizzle(unsigned char pin,
+		unsigned char idsel)
+{
+	return (((pin-1) + idsel) % 4) + 1;
+}
+
+/*
+ * The following macro is used to lookup irqs in a standard table
+ * format for those PPC systems that do not already have PCI
+ * interrupts properly routed.
+ */
+/* FIXME - double check this */
+#define PCI_IRQ_TABLE_LOOKUP						    \
+({ long _ctl_ = -1; 							    \
+   if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot)    \
+     _ctl_ = pci_irq_table[idsel - min_idsel][pin-1];			    \
+   _ctl_; })
+
+/*
+ * Scan the buses below a given PCI host bridge and assign suitable
+ * resources to all devices found.
+ */
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
new file mode 100644
index 000000000000..ce5ae6d048f5
--- /dev/null
+++ b/include/asm-ppc/pci.h
@@ -0,0 +1,108 @@
+#ifndef __PPC_PCI_H
+#define __PPC_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm-generic/pci-dma-compat.h>
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers
+ */
+extern int pci_assign_all_busses;
+
+#define pcibios_assign_all_busses()	(pci_assign_all_busses)
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+extern inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res);
+
+/*
+ * The PCI bus bridge can translate addresses issued by the processor(s)
+ * into a different address on the PCI bus.  On 32-bit cpus, we assume
+ * this mapping is 1-1, but on 64-bit systems it often isn't.
+ *
+ * Obsolete ! Drivers should now use pci_resource_to_bus
+ */
+extern unsigned long phys_to_bus(unsigned long pa);
+extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr);
+extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+/*
+ * At present there are very few 32-bit PPC machines that can have
+ * memory above the 4GB point, and we don't support that.
+ */
+#define pci_dac_dma_supported(pci_dev, mask)	(0)
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+/* Set the name of the bus as it appears in /proc/bus/pci */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 0;
+}
+
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_add_platform_entries(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long offset,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#endif	/* __KERNEL__ */
+
+#endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc/percpu.h b/include/asm-ppc/percpu.h
new file mode 100644
index 000000000000..d66667cd5878
--- /dev/null
+++ b/include/asm-ppc/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_PPC_PERCPU__
+#define __ARCH_PPC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_PPC_PERCPU__ */
diff --git a/include/asm-ppc/perfmon.h b/include/asm-ppc/perfmon.h
new file mode 100644
index 000000000000..5e7a89c47b5b
--- /dev/null
+++ b/include/asm-ppc/perfmon.h
@@ -0,0 +1,22 @@
+#ifndef __PERFMON_H
+#define __PERFMON_H
+
+extern void (*perf_irq)(struct pt_regs *);
+
+int request_perfmon_irq(void (*handler)(struct pt_regs *));
+void free_perfmon_irq(void);
+
+#ifdef CONFIG_FSL_BOOKE
+void init_pmc_stop(int ctr);
+void set_pmc_event(int ctr, int event);
+void set_pmc_user_kernel(int ctr, int user, int kernel);
+void set_pmc_marked(int ctr, int mark0, int mark1);
+void pmc_start_ctr(int ctr, int enable);
+void pmc_start_ctrs(int enable);
+void pmc_stop_ctrs(void);
+void dump_pmcs(void);
+
+extern struct op_ppc32_model op_model_fsl_booke;
+#endif
+
+#endif /* __PERFMON_H */
diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
new file mode 100644
index 000000000000..931b6de7ef53
--- /dev/null
+++ b/include/asm-ppc/pgalloc.h
@@ -0,0 +1,44 @@
+#ifdef __KERNEL__
+#ifndef _PPC_PGALLOC_H
+#define _PPC_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)                     do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)      BUG()
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#else
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(pte_t *pte);
+extern void pte_free(struct page *pte);
+
+#define __pte_free_tlb(tlb, pte)	pte_free((pte))
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _PPC_PGALLOC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
new file mode 100644
index 000000000000..19dfb7abaa21
--- /dev/null
+++ b/include/asm-ppc/pgtable.h
@@ -0,0 +1,776 @@
+#ifdef __KERNEL__
+#ifndef _PPC_PGTABLE_H
+#define _PPC_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access.  The TLB does not have accessed nor write
+ * protect.  We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect.  We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators.  Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded.  We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added.  We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC.  The 8M pages are only used for kernel
+ * mapping of well known areas.  The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef CONFIG_44x
+#include <asm/ibm44x.h>
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC44x_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here.  The 40x hardware TLBLO
+   field looks like this:
+
+   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+
+   Where possible we make the Linux PTE bits match up with this
+
+   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+     support down to 1k pages), this is done in the TLBMiss exception
+     handler.
+   - We use only zones 0 (for kernel pages) and 1 (for user pages)
+     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+     zone.
+   - PRESENT *must* be in the bottom two bits because swap cache
+     entries use the top 30 bits.  Because 40x doesn't support SMP
+     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+     is cleared in the TLB miss handler before the TLB entry is loaded.
+   - All other bits of the PTE are loaded into TLBLO without
+     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+     software PTE bits.  We actually use use bits 21, 24, 25, and
+     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+     PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+
+#define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
+#define _PMD_BAD	0x802
+#define _PMD_SIZE	0x0e0	/* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M	0x0c0
+#define _PMD_SIZE_16M	0x0e0
+#define PMD_PAGE_SIZE(pmdval)	(1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing.  I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN.  This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ */
+#define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
+#define	_PAGE_RW	0x00000002		/* S: Write permission */
+#define	_PAGE_DIRTY	0x00000004		/* S: Page dirty */
+#define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
+#define _PAGE_HWWRITE	0x00000010		/* H: Dirty & RW */
+#define _PAGE_HWEXEC	0x00000020		/* H: Execute permission */
+#define	_PAGE_USER	0x00000040		/* S: User page */
+#define	_PAGE_ENDIAN	0x00000080		/* H: E bit */
+#define	_PAGE_GUARDED	0x00000100		/* H: G bit */
+#define	_PAGE_COHERENT	0x00000200		/* H: M bit */
+#define _PAGE_FILE	0x00000400		/* S: nonlinear file mapping */
+#define	_PAGE_NO_CACHE	0x00000400		/* H: I bit */
+#define	_PAGE_WRITETHRU	0x00000800		/* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+
+#elif defined(CONFIG_E500)
+
+/*
+   MMU Assist Register 3:
+
+   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+   - PRESENT *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+
+   - FILE *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+*/
+
+/* Definitions for e500 core */
+#define _PAGE_PRESENT	0x001	/* S: PTE contains a translation */
+#define _PAGE_USER	0x002	/* S: User page (maps to UR) */
+#define _PAGE_FILE	0x002	/* S: when !present: nonlinear file mapping */
+#define _PAGE_ACCESSED	0x004	/* S: Page referenced */
+#define _PAGE_HWWRITE	0x008	/* H: Dirty & RW, set in exception */
+#define _PAGE_RW	0x010	/* S: Write permission */
+#define _PAGE_HWEXEC	0x020	/* H: UX permission */
+
+#define _PAGE_ENDIAN	0x040	/* H: E bit */
+#define _PAGE_GUARDED	0x080	/* H: G bit */
+#define _PAGE_COHERENT	0x100	/* H: M bit */
+#define _PAGE_NO_CACHE	0x200	/* H: I bit */
+#define _PAGE_WRITETHRU	0x400	/* H: W bit */
+#define _PAGE_DIRTY	0x800	/* S: Page dirty */
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+#define NUM_TLBCAMS	(16)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT	0x0001	/* Page is valid */
+#define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
+#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
+#define _PAGE_GUARDED	0x0010	/* software: guarded access */
+#define _PAGE_DIRTY	0x0020	/* software: page changed */
+#define _PAGE_RW	0x0040	/* software: user write access allowed */
+#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change.  It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT	0x0001
+#define _PMD_BAD	0x0ff0
+#define _PMD_PAGE_MASK	0x000c
+#define _PMD_PAGE_8M	0x000c
+
+/*
+ * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
+ * for an address even if _PAGE_PRESENT is not set, as a performance
+ * optimization.  This is a bug if you ever want to use swap unless
+ * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
+ * definitions for __swp_entry etc. below, which would be gross.
+ *  -- paulus
+ */
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
+#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE	0x004	/* when !present: nonlinear file mapping */
+#define _PAGE_USER	0x004	/* usermode access allowed */
+#define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
+#define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
+#define _PAGE_DIRTY	0x080	/* C: page changed */
+#define _PAGE_ACCESSED	0x100	/* R: page referenced */
+#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
+#define _PAGE_RW	0x400	/* software: user write access allowed */
+
+#define _PTE_NONE_MASK	_PAGE_HASHPTE
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK	_PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE	0
+#define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL	(_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT	_PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT	(_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL		__pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE	__pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis.  So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+#define pte_pfn(x)		(pte_val(x) >> PAGE_SHIFT)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot)	__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+#define pgd_clear(xp)				do { } while (0)
+
+#define pgd_page(pgd) \
+	((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)		{ return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte)		{ return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) {
+	pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) {
+	pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+				       unsigned long set)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+	return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+	*ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calles this without flushing the TLB entry, this is wrong
+ * for our hash-based implementation, we fix that up here
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+#endif
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma,
+					    unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+	pte_update(ptep, 0, bits);
+}
+
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+	do {								   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);	   \
+		flush_tlb_page_nohash(__vma, __address);	       	   \
+	} while(0)
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_kernel(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_kernel(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+extern void paging_init(void);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk (unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+   compilation errors. */
+#define	KERNELMAP_FULL_CACHING		0
+#define	KERNELMAP_NOCACHE_SER		1
+#define	KERNELMAP_NOCACHE_NONSER	2
+#define	KERNELMAP_NO_COPYBACK		3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+				int nocacheflag, unsigned long *memavailp );
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode (unsigned long address, unsigned long size,
+                                 unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	(1)
+
+#ifdef CONFIG_PHYS_64BIT
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			unsigned long paddr, unsigned long size, pgprot_t prot);
+static inline int io_remap_page_range(struct vm_area_struct *vma,
+					unsigned long vaddr,
+					unsigned long paddr,
+					unsigned long size,
+					pgprot_t prot)
+{
+	phys_addr_t paddr64 = fixup_bigphys_addr(paddr, size);
+	return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
+}
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+					unsigned long vaddr,
+					unsigned long pfn,
+					unsigned long size,
+					pgprot_t prot)
+{
+	phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+	return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _PPC_PGTABLE_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pmac_feature.h b/include/asm-ppc/pmac_feature.h
new file mode 100644
index 000000000000..98c206d8c024
--- /dev/null
+++ b/include/asm-ppc/pmac_feature.h
@@ -0,0 +1,365 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ *                    Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ *       not worth it, the media-bay driver can directly use the mac-io
+ *       ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_ASM_PMAC_FEATURE_H
+#define __PPC_ASM_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
+#define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
+#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
+#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
+#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
+#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3		0x49	/* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4		0x50	/* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC			0x50	/* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99	0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC		0x80	/* XServe */
+#define PMAC_TYPE_WINDTUNNEL		0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC	0x102	/* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID	0x11f	/* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5		0x150	/* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L	0x151	/* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5		0x152	/* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5		0x153	/* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2		0x19f	/* Any other K2 based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP		0x00000001
+#define PMAC_MB_HAS_FW_POWER		0x00000002
+#define PMAC_MB_OLD_CORE99		0x00000004
+#define PMAC_MB_MOBILE			0x00000008
+#define PMAC_MB_MAY_SLEEP		0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+					long param, long value)
+{
+	if (!ppc_md.feature_call)
+		return -ENODEV;
+	return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
+	#define PMAC_SCC_ASYNC		0
+	#define PMAC_SCC_IRDA		1
+	#define PMAC_SCC_I2S1		2
+	#define PMAC_SCC_FLAG_XMON	0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0  - model id
+ *           1  - model flags (capabilities)
+ *           2  - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
+#define   PMAC_MB_INFO_MODEL	0
+#define   PMAC_MB_INFO_FLAGS	1
+#define   PMAC_MB_INFO_NAME	2
+
+/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC		PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE	(NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE     	PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE	PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
+
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS		2
+
+enum {
+	macio_unknown = 0,
+	macio_grand_central,
+	macio_ohare,
+	macio_ohareII,
+	macio_heathrow,
+	macio_gatwick,
+	macio_paddington,
+	macio_keylargo,
+	macio_pangea,
+	macio_intrepid,
+	macio_keylargo2,
+};
+
+struct macio_chip
+{
+	struct device_node	*of_node;
+	int			type;
+	const char		*name;
+	int			rev;
+	volatile u32		__iomem *base;
+	unsigned long		flags;
+
+	/* For use by macio_asic PCI driver */
+	struct macio_bus	lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON	0x00000001
+#define MACIO_FLAG_SCCB_ON	0x00000002
+#define MACIO_FLAG_SCC_LOCKED	0x00000004
+#define MACIO_FLAG_AIRPORT_ON	0x00000010
+#define MACIO_FLAG_FW_SUPPORTED	0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r)	((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r)	(((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r)		(in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v)	(out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r)		(in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v)		(out_8(MACIO_FCR8(macio,r), (v)))
+
+#endif /* __PPC_ASM_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pmac_low_i2c.h b/include/asm-ppc/pmac_low_i2c.h
new file mode 100644
index 000000000000..809a5963d5e7
--- /dev/null
+++ b/include/asm-ppc/pmac_low_i2c.h
@@ -0,0 +1,43 @@
+/* 
+ *  include/asm-ppc/pmac_low_i2c.h
+ *
+ *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+	pmac_low_i2c_mode_dumb		= 1,
+	pmac_low_i2c_mode_std		= 2,
+	pmac_low_i2c_mode_stdsub	= 3,
+	pmac_low_i2c_mode_combined	= 4,
+};
+
+/* RW bit in address */
+enum {
+	pmac_low_i2c_read		= 0x01,
+	pmac_low_i2c_write		= 0x00
+};
+
+/* Init, called early during boot */
+extern void pmac_init_low_i2c(void);
+
+/* Locking functions exposed to i2c-keywest */
+int pmac_low_i2c_lock(struct device_node *np);
+int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+int pmac_low_i2c_open(struct device_node *np, int channel);
+int pmac_low_i2c_close(struct device_node *np);
+int pmac_low_i2c_setmode(struct device_node *np, int mode);
+int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len);
+
+
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h
new file mode 100644
index 000000000000..6f6760b30dd8
--- /dev/null
+++ b/include/asm-ppc/pnp.h
@@ -0,0 +1,645 @@
+#ifdef __KERNEL__
+/* 11/02/95                                                                   */
+/*----------------------------------------------------------------------------*/
+/*      Plug and Play header definitions                                      */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for PnP on PowerPC Reference Platform                        */
+/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993.  It        */
+/* (or later versions) is available on Compuserve in the PLUGPLAY area.       */
+/* This code has extensions to that specification, namely new short and       */
+/* long tag types for platform dependent information                          */
+
+/* Warning: LE notation used throughout this file                             */
+
+/* For enum's: if given in hex then they are bit significant, i.e.            */
+/* only one bit is on for each enum                                           */
+
+#ifndef _PNP_
+#define _PNP_
+
+#ifndef __ASSEMBLY__
+#define MAX_MEM_REGISTERS 9
+#define MAX_IO_PORTS 20
+#define MAX_IRQS 7
+/*#define MAX_DMA_CHANNELS 7*/
+
+/* Interrupt controllers */
+
+#define PNPinterrupt0 "PNP0000"      /* AT Interrupt Controller               */
+#define PNPinterrupt1 "PNP0001"      /* EISA Interrupt Controller             */
+#define PNPinterrupt2 "PNP0002"      /* MCA Interrupt Controller              */
+#define PNPinterrupt3 "PNP0003"      /* APIC                                  */
+#define PNPExtInt     "IBM000D"      /* PowerPC Extended Interrupt Controller */
+
+/* Timers */
+
+#define PNPtimer0     "PNP0100"      /* AT Timer                              */
+#define PNPtimer1     "PNP0101"      /* EISA Timer                            */
+#define PNPtimer2     "PNP0102"      /* MCA Timer                             */
+
+/* DMA controllers */
+
+#define PNPdma0       "PNP0200"      /* AT DMA Controller                     */
+#define PNPdma1       "PNP0201"      /* EISA DMA Controller                   */
+#define PNPdma2       "PNP0202"      /* MCA DMA Controller                    */
+
+/* start of August 15, 1994 additions */
+/* CMOS */
+#define PNPCMOS       "IBM0009"      /* CMOS                                  */
+
+/* L2 Cache */
+#define PNPL2         "IBM0007"      /* L2 Cache                              */
+
+/* NVRAM */
+#define PNPNVRAM      "IBM0008"      /* NVRAM                                 */
+
+/* Power Management */
+#define PNPPM         "IBM0005"      /* Power Management                      */
+/* end of August 15, 1994 additions */
+
+/* Keyboards */
+
+#define PNPkeyboard0  "PNP0300"      /* IBM PC/XT KB Cntlr (83 key, no mouse) */
+#define PNPkeyboard1  "PNP0301"      /* Olivetti ICO (102 key)                */
+#define PNPkeyboard2  "PNP0302"      /* IBM PC/AT KB Cntlr (84 key)           */
+#define PNPkeyboard3  "PNP0303"      /* IBM Enhanced (101/2 key, PS/2 mouse)  */
+#define PNPkeyboard4  "PNP0304"      /* Nokia 1050 KB Cntlr                   */
+#define PNPkeyboard5  "PNP0305"      /* Nokia 9140 KB Cntlr                   */
+#define PNPkeyboard6  "PNP0306"      /* Standard Japanese KB Cntlr            */
+#define PNPkeyboard7  "PNP0307"      /* Microsoft Windows (R) KB Cntlr        */
+
+/* Parallel port controllers */
+
+#define PNPparallel0 "PNP0400"       /* Standard LPT Parallel Port            */
+#define PNPparallel1 "PNP0401"       /* ECP Parallel Port                     */
+#define PNPepp       "IBM001C"       /* EPP Parallel Port                     */
+
+/* Serial port controllers */
+
+#define PNPserial0   "PNP0500"       /* Standard PC Serial port               */
+#define PNPSerial1   "PNP0501"       /* 16550A Compatible Serial port         */
+
+/* Disk controllers */
+
+#define PNPdisk0     "PNP0600"       /* Generic ESDI/IDE/ATA Compat HD Cntlr  */
+#define PNPdisk1     "PNP0601"       /* Plus Hardcard II                      */
+#define PNPdisk2     "PNP0602"       /* Plus Hardcard IIXL/EZ                 */
+
+/* Diskette controllers */
+
+#define PNPdiskette0 "PNP0700"       /* PC Standard Floppy Disk Controller    */
+
+/* Display controllers */
+
+#define PNPdisplay0  "PNP0900"       /* VGA Compatible                        */
+#define PNPdisplay1  "PNP0901"       /* Video Seven VGA                       */
+#define PNPdisplay2  "PNP0902"       /* 8514/A Compatible                     */
+#define PNPdisplay3  "PNP0903"       /* Trident VGA                           */
+#define PNPdisplay4  "PNP0904"       /* Cirrus Logic Laptop VGA               */
+#define PNPdisplay5  "PNP0905"       /* Cirrus Logic VGA                      */
+#define PNPdisplay6  "PNP0906"       /* Tseng ET4000 or ET4000/W32            */
+#define PNPdisplay7  "PNP0907"       /* Western Digital VGA                   */
+#define PNPdisplay8  "PNP0908"       /* Western Digital Laptop VGA            */
+#define PNPdisplay9  "PNP0909"       /* S3                                    */
+#define PNPdisplayA  "PNP090A"       /* ATI Ultra Pro/Plus (Mach 32)          */
+#define PNPdisplayB  "PNP090B"       /* ATI Ultra (Mach 8)                    */
+#define PNPdisplayC  "PNP090C"       /* XGA Compatible                        */
+#define PNPdisplayD  "PNP090D"       /* ATI VGA Wonder                        */
+#define PNPdisplayE  "PNP090E"       /* Weitek P9000 Graphics Adapter         */
+#define PNPdisplayF  "PNP090F"       /* Oak Technology VGA                    */
+
+/* Peripheral busses */
+
+#define PNPbuses0    "PNP0A00"       /* ISA Bus                               */
+#define PNPbuses1    "PNP0A01"       /* EISA Bus                              */
+#define PNPbuses2    "PNP0A02"       /* MCA Bus                               */
+#define PNPbuses3    "PNP0A03"       /* PCI Bus                               */
+#define PNPbuses4    "PNP0A04"       /* VESA/VL Bus                           */
+
+/* RTC, BIOS, planar devices */
+
+#define PNPspeaker0  "PNP0800"       /* AT Style Speaker Sound                */
+#define PNPrtc0      "PNP0B00"       /* AT RTC                                */
+#define PNPpnpbios0  "PNP0C00"       /* PNP BIOS (only created by root enum)  */
+#define PNPpnpbios1  "PNP0C01"       /* System Board Memory Device            */
+#define PNPpnpbios2  "PNP0C02"       /* Math Coprocessor                      */
+#define PNPpnpbios3  "PNP0C03"       /* PNP BIOS Event Notification Interrupt */
+
+/* PCMCIA controller */
+
+#define PNPpcmcia0   "PNP0E00"       /* Intel 82365 Compatible PCMCIA Cntlr   */
+
+/* Mice */
+
+#define PNPmouse0    "PNP0F00"       /* Microsoft Bus Mouse                   */
+#define PNPmouse1    "PNP0F01"       /* Microsoft Serial Mouse                */
+#define PNPmouse2    "PNP0F02"       /* Microsoft Inport Mouse                */
+#define PNPmouse3    "PNP0F03"       /* Microsoft PS/2 Mouse                  */
+#define PNPmouse4    "PNP0F04"       /* Mousesystems Mouse                    */
+#define PNPmouse5    "PNP0F05"       /* Mousesystems 3 Button Mouse - COM2    */
+#define PNPmouse6    "PNP0F06"       /* Genius Mouse - COM1                   */
+#define PNPmouse7    "PNP0F07"       /* Genius Mouse - COM2                   */
+#define PNPmouse8    "PNP0F08"       /* Logitech Serial Mouse                 */
+#define PNPmouse9    "PNP0F09"       /* Microsoft Ballpoint Serial Mouse      */
+#define PNPmouseA    "PNP0F0A"       /* Microsoft PNP Mouse                   */
+#define PNPmouseB    "PNP0F0B"       /* Microsoft PNP Ballpoint Mouse         */
+
+/* Modems */
+
+#define PNPmodem0    "PNP9000"       /* Specific IDs TBD                      */
+
+/* Network controllers */
+
+#define PNPnetworkC9 "PNP80C9"       /* IBM Token Ring                        */
+#define PNPnetworkCA "PNP80CA"       /* IBM Token Ring II                     */
+#define PNPnetworkCB "PNP80CB"       /* IBM Token Ring II/Short               */
+#define PNPnetworkCC "PNP80CC"       /* IBM Token Ring 4/16Mbs                */
+#define PNPnetwork27 "PNP8327"       /* IBM Token Ring (All types)            */
+#define PNPnetworket "IBM0010"       /* IBM Ethernet used by Power PC         */
+#define PNPneteisaet "IBM2001"       /* IBM Ethernet EISA adapter             */
+#define PNPAMD79C970 "IBM0016"       /* AMD 79C970 (PCI Ethernet)             */
+
+/* SCSI controllers */
+
+#define PNPscsi0     "PNPA000"       /* Adaptec 154x Compatible SCSI Cntlr    */
+#define PNPscsi1     "PNPA001"       /* Adaptec 174x Compatible SCSI Cntlr    */
+#define PNPscsi2     "PNPA002"       /* Future Domain 16-700 Compat SCSI Cntlr*/
+#define PNPscsi3     "PNPA003"       /* Panasonic CDROM Adapter (SBPro/SB16)  */
+#define PNPscsiF     "IBM000F"       /* NCR 810 SCSI Controller               */
+#define PNPscsi825   "IBM001B"       /* NCR 825 SCSI Controller               */
+#define PNPscsi875   "IBM0018"       /* NCR 875 SCSI Controller               */
+
+/* Sound/Video, Multimedia */
+
+#define PNPmm0       "PNPB000"       /* Sound Blaster Compatible Sound Device */
+#define PNPmm1       "PNPB001"       /* MS Windows Sound System Compat Device */
+#define PNPmmF       "IBM000E"       /* Crystal CS4231 Audio Device           */
+#define PNPv7310     "IBM0015"       /* ASCII V7310 Video Capture Device      */
+#define PNPmm4232    "IBM0017"       /* Crystal CS4232 Audio Device           */
+#define PNPpmsyn     "IBM001D"       /* YMF 289B chip (Yamaha)                */
+#define PNPgp4232    "IBM0012"       /* Crystal CS4232 Game Port              */
+#define PNPmidi4232  "IBM0013"       /* Crystal CS4232 MIDI                   */
+
+/* Operator Panel */
+#define PNPopctl     "IBM000B"       /* Operator's panel                      */
+
+/* Service Processor */
+#define PNPsp        "IBM0011"       /* IBM Service Processor                 */
+#define PNPLTsp      "IBM001E"       /* Lightning/Terlingua Support Processor */
+#define PNPLTmsp     "IBM001F"       /* Lightning/Terlingua Mini-SP           */
+
+/* Memory Controller */
+#define PNPmemctl    "IBM000A"       /* Memory controller                     */
+
+/* Graphics Assist */
+#define PNPg_assist  "IBM0014"       /* Graphics Assist                       */
+
+/* Miscellaneous Device Controllers */
+#define PNPtablet    "IBM0019"       /* IBM Tablet Controller                 */
+
+/* PNP Packet Handles */
+
+#define S1_Packet                0x0A   /* Version resource                   */
+#define S2_Packet                0x15   /* Logical DEVID (without flags)      */
+#define S2_Packet_flags          0x16   /* Logical DEVID (with flags)         */
+#define S3_Packet                0x1C   /* Compatible device ID               */
+#define S4_Packet                0x22   /* IRQ resource (without flags)       */
+#define S4_Packet_flags          0x23   /* IRQ resource (with flags)          */
+#define S5_Packet                0x2A   /* DMA resource                       */
+#define S6_Packet                0x30   /* Depend funct start (w/o priority)  */
+#define S6_Packet_priority       0x31   /* Depend funct start (w/ priority)   */
+#define S7_Packet                0x38   /* Depend funct end                   */
+#define S8_Packet                0x47   /* I/O port resource (w/o fixed loc)  */
+#define S9_Packet_fixed          0x4B   /* I/O port resource (w/ fixed loc)   */
+#define S14_Packet               0x71   /* Vendor defined                     */
+#define S15_Packet               0x78   /* End of resource (w/o checksum)     */
+#define S15_Packet_checksum      0x79   /* End of resource (w/ checksum)      */
+#define L1_Packet                0x81   /* Memory range                       */
+#define L1_Shadow                0x20   /* Memory is shadowable               */
+#define L1_32bit_mem             0x18   /* 32-bit memory only                 */
+#define L1_8_16bit_mem           0x10   /* 8- and 16-bit supported            */
+#define L1_Decode_Hi             0x04   /* decode supports high address       */
+#define L1_Cache                 0x02   /* read cacheable, write-through      */
+#define L1_Writeable             0x01   /* Memory is writeable                */
+#define L2_Packet                0x82   /* ANSI ID string                     */
+#define L3_Packet                0x83   /* Unicode ID string                  */
+#define L4_Packet                0x84   /* Vendor defined                     */
+#define L5_Packet                0x85   /* Large I/O                          */
+#define L6_Packet                0x86   /* 32-bit Fixed Loc Mem Range Desc    */
+#define END_TAG                  0x78   /* End of resource                    */
+#define DF_START_TAG             0x30   /* Dependent function start           */
+#define DF_START_TAG_priority    0x31   /* Dependent function start           */
+#define DF_END_TAG               0x38   /* Dependent function end             */
+#define SUBOPTIMAL_CONFIGURATION 0x2    /* Priority byte sub optimal config   */
+
+/* Device Base Type Codes */
+
+typedef enum _PnP_BASE_TYPE {
+  Reserved = 0,
+  MassStorageDevice = 1,
+  NetworkInterfaceController = 2,
+  DisplayController = 3,
+  MultimediaController = 4,
+  MemoryController = 5,
+  BridgeController = 6,
+  CommunicationsDevice = 7,
+  SystemPeripheral = 8,
+  InputDevice = 9,
+  ServiceProcessor = 0x0A,              /* 11/2/95                            */
+  } PnP_BASE_TYPE;
+
+/* Device Sub Type Codes */
+
+typedef enum _PnP_SUB_TYPE {
+  SCSIController = 0,
+  IDEController = 1,
+  FloppyController = 2,
+  IPIController = 3,
+  OtherMassStorageController = 0x80,
+
+  EthernetController = 0,
+  TokenRingController = 1,
+  FDDIController = 2,
+  OtherNetworkController = 0x80,
+
+  VGAController= 0,
+  SVGAController= 1,
+  XGAController= 2,
+  OtherDisplayController = 0x80,
+
+  VideoController = 0,
+  AudioController = 1,
+  OtherMultimediaController = 0x80,
+
+  RAM = 0,
+  FLASH = 1,
+  OtherMemoryDevice = 0x80,
+
+  HostProcessorBridge = 0,
+  ISABridge = 1,
+  EISABridge = 2,
+  MicroChannelBridge = 3,
+  PCIBridge = 4,
+  PCMCIABridge = 5,
+  VMEBridge = 6,
+  OtherBridgeDevice = 0x80,
+
+  RS232Device = 0,
+  ATCompatibleParallelPort = 1,
+  OtherCommunicationsDevice = 0x80,
+
+  ProgrammableInterruptController = 0,
+  DMAController = 1,
+  SystemTimer = 2,
+  RealTimeClock = 3,
+  L2Cache = 4,
+  NVRAM = 5,
+  PowerManagement = 6,
+  CMOS = 7,
+  OperatorPanel = 8,
+  ServiceProcessorClass1 = 9,
+  ServiceProcessorClass2 = 0xA,
+  ServiceProcessorClass3 = 0xB,
+  GraphicAssist = 0xC,
+  SystemPlanar = 0xF,                   /* 10/5/95                            */
+  OtherSystemPeripheral = 0x80,
+
+  KeyboardController = 0,
+  Digitizer = 1,
+  MouseController = 2,
+  TabletController = 3,                 /* 10/27/95                           */
+  OtherInputController = 0x80,
+
+  GeneralMemoryController = 0,
+  } PnP_SUB_TYPE;
+
+/* Device Interface Type Codes */
+
+typedef enum _PnP_INTERFACE {
+  General = 0,
+  GeneralSCSI = 0,
+  GeneralIDE = 0,
+  ATACompatible = 1,
+
+  GeneralFloppy = 0,
+  Compatible765 = 1,
+  NS398_Floppy = 2,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26E_Floppy = 3,                     /* Ports 26E and 26F                  */
+  NS15C_Floppy = 4,                     /* Ports 15C and 15D                  */
+  NS2E_Floppy = 5,                      /* Ports 2E and 2F                    */
+  CHRP_Floppy = 6,                      /* CHRP Floppy in PR*P system         */
+
+  GeneralIPI = 0,
+
+  GeneralEther = 0,
+  GeneralToken = 0,
+  GeneralFDDI = 0,
+
+  GeneralVGA = 0,
+  GeneralSVGA = 0,
+  GeneralXGA = 0,
+
+  GeneralVideo = 0,
+  GeneralAudio = 0,
+  CS4232Audio = 1,                      /* CS 4232 Plug 'n Play Configured    */
+
+  GeneralRAM = 0,
+  GeneralFLASH = 0,
+  PCIMemoryController = 0,              /* PCI Config Method                  */
+  RS6KMemoryController = 1,             /* RS6K Config Method                 */
+
+  GeneralHostBridge = 0,
+  GeneralISABridge = 0,
+  GeneralEISABridge = 0,
+  GeneralMCABridge = 0,
+  GeneralPCIBridge = 0,
+  PCIBridgeDirect = 0,
+  PCIBridgeIndirect = 1,
+  PCIBridgeRS6K = 2,
+  GeneralPCMCIABridge = 0,
+  GeneralVMEBridge = 0,
+
+  GeneralRS232 = 0,
+  COMx = 1,
+  Compatible16450 = 2,
+  Compatible16550 = 3,
+  NS398SerPort = 4,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26ESerPort = 5,                     /* Ports 26E and 26F                  */
+  NS15CSerPort = 6,                     /* Ports 15C and 15D                  */
+  NS2ESerPort = 7,                      /* Ports 2E and 2F                    */
+
+  GeneralParPort = 0,
+  LPTx = 1,
+  NS398ParPort = 2,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26EParPort = 3,                     /* Ports 26E and 26F                  */
+  NS15CParPort = 4,                     /* Ports 15C and 15D                  */
+  NS2EParPort = 5,                      /* Ports 2E and 2F                    */
+
+  GeneralPIC = 0,
+  ISA_PIC = 1,
+  EISA_PIC = 2,
+  MPIC = 3,
+  RS6K_PIC = 4,
+
+  GeneralDMA = 0,
+  ISA_DMA = 1,
+  EISA_DMA = 2,
+
+  GeneralTimer = 0,
+  ISA_Timer = 1,
+  EISA_Timer = 2,
+  GeneralRTC = 0,
+  ISA_RTC = 1,
+
+  StoreThruOnly = 1,
+  StoreInEnabled = 2,
+  RS6KL2Cache = 3,
+
+  IndirectNVRAM = 0,                    /* Indirectly addressed               */
+  DirectNVRAM = 1,                      /* Memory Mapped                      */
+  IndirectNVRAM24 = 2,                  /* Indirectly addressed - 24 bit      */
+
+  GeneralPowerManagement = 0,
+  EPOWPowerManagement = 1,
+  PowerControl = 2,                    // d1378
+
+  GeneralCMOS = 0,
+
+  GeneralOPPanel = 0,
+  HarddiskLight = 1,
+  CDROMLight = 2,
+  PowerLight = 3,
+  KeyLock = 4,
+  ANDisplay = 5,                        /* AlphaNumeric Display               */
+  SystemStatusLED = 6,                  /* 3 digit 7 segment LED              */
+  CHRP_SystemStatusLED = 7,             /* CHRP LEDs in PR*P system           */
+
+  GeneralServiceProcessor = 0,
+
+  TransferData = 1,
+  IGMC32 = 2,
+  IGMC64 = 3,
+
+  GeneralSystemPlanar = 0,              /* 10/5/95                            */
+
+  } PnP_INTERFACE;
+
+/* PnP resources */
+
+/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
+
+typedef struct _SERIAL_ID {
+  unsigned char VendorID0;              /*    Bit(7)=0                        */
+                                        /*    Bits(6:2)=1st character in      */
+                                        /*       compressed ASCII             */
+                                        /*    Bits(1:0)=2nd character in      */
+                                        /*       compressed ASCII bits(4:3)   */
+  unsigned char VendorID1;              /*    Bits(7:5)=2nd character in      */
+                                        /*       compressed ASCII bits(2:0)   */
+                                        /*    Bits(4:0)=3rd character in      */
+                                        /*       compressed ASCII             */
+  unsigned char VendorID2;              /* Product number - vendor assigned   */
+  unsigned char VendorID3;              /* Product number - vendor assigned   */
+
+/* Serial number is to provide uniqueness if more than one board of same      */
+/* type is in system.  Must be "FFFFFFFF" if feature not supported.           */
+
+  unsigned char Serial0;                /* Unique serial number bits (7:0)    */
+  unsigned char Serial1;                /* Unique serial number bits (15:8)   */
+  unsigned char Serial2;                /* Unique serial number bits (23:16)  */
+  unsigned char Serial3;                /* Unique serial number bits (31:24)  */
+  unsigned char Checksum;
+  } SERIAL_ID;
+
+typedef enum _PnPItemName {
+  Unused = 0,
+  PnPVersion = 1,
+  LogicalDevice = 2,
+  CompatibleDevice = 3,
+  IRQFormat = 4,
+  DMAFormat = 5,
+  StartDepFunc = 6,
+  EndDepFunc = 7,
+  IOPort = 8,
+  FixedIOPort = 9,
+  Res1 = 10,
+  Res2 = 11,
+  Res3 = 12,
+  SmallVendorItem = 14,
+  EndTag = 15,
+  MemoryRange = 1,
+  ANSIIdentifier = 2,
+  UnicodeIdentifier = 3,
+  LargeVendorItem = 4,
+  MemoryRange32 = 5,
+  MemoryRangeFixed32 = 6,
+  } PnPItemName;
+
+/* Define a bunch of access functions for the bits in the tag field */
+
+/* Tag type - 0 = small; 1 = large */
+#define tag_type(t) (((t) & 0x80)>>7)
+#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
+
+/* Small item name is 4 bits - one of PnPItemName enum above */
+#define tag_small_item_name(t) (((t) & 0x78)>>3)
+#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
+
+/* Small item count is 3 bits - count of further bytes in packet */
+#define tag_small_count(t) ((t) & 0x07)
+#define set_tag_count(t,v) (t = (t & 0x78) | (v))
+
+/* Large item name is 7 bits - one of PnPItemName enum above */
+#define tag_large_item_name(t) ((t) & 0x7f)
+#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
+
+/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
+
+typedef union _PnP_TAG_PACKET {
+  struct _S1_Pack{                      /* VERSION PACKET                     */
+    unsigned char Tag;                  /* small tag = 0x0a                   */
+    unsigned char Version[2];           /* PnP version, Vendor version        */
+    } S1_Pack;
+
+  struct _S2_Pack{                      /* LOGICAL DEVICE ID PACKET           */
+    unsigned char Tag;                  /* small tag = 0x15 or 0x16           */
+    unsigned char DevId[4];             /* Logical device id                  */
+    unsigned char Flags[2];             /* bit(0) boot device;                */
+                                        /* bit(7:1) cmd in range x31-x37      */
+                                        /* bit(7:0) cmd in range x28-x3f (opt)*/
+    } S2_Pack;
+
+  struct _S3_Pack{                      /* COMPATIBLE DEVICE ID PACKET        */
+    unsigned char Tag;                  /* small tag = 0x1c                   */
+    unsigned char CompatId[4];          /* Compatible device id               */
+    } S3_Pack;
+
+  struct _S4_Pack{                      /* IRQ PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x22 or 0x23           */
+    unsigned char IRQMask[2];           /* bit(0) is IRQ0, ...;               */
+                                        /* bit(0) is IRQ8 ...                 */
+    unsigned char IRQInfo;              /* optional; assume bit(0)=1; else    */
+                                        /*  bit(0) - high true edge sensitive */
+                                        /*  bit(1) - low true edge sensitive  */
+                                        /*  bit(2) - high true level sensitive*/
+                                        /*  bit(3) - low true level sensitive */
+                                        /*  bit(7:4) - must be 0              */
+    } S4_Pack;
+
+  struct _S5_Pack{                      /* DMA PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x2a                   */
+    unsigned char DMAMask;              /* bit(0) is channel 0 ...            */
+    unsigned char DMAInfo;
+    } S5_Pack;
+
+  struct _S6_Pack{                      /* START DEPENDENT FUNCTION PACKET    */
+    unsigned char Tag;                  /* small tag = 0x30 or 0x31           */
+    unsigned char Priority;             /* Optional; if missing then x01; else*/
+                                        /*  x00 = best possible               */
+                                        /*  x01 = acceptible                  */
+                                        /*  x02 = sub-optimal but functional  */
+    } S6_Pack;
+
+  struct _S7_Pack{                      /* END DEPENDENT FUNCTION PACKET      */
+    unsigned char Tag;                  /* small tag = 0x38                   */
+    } S7_Pack;
+
+  struct _S8_Pack{                      /* VARIABLE I/O PORT PACKET           */
+    unsigned char Tag;                  /* small tag x47                      */
+    unsigned char IOInfo;               /* x0  = decode only bits(9:0);       */
+#define  ISAAddr16bit         0x01      /* x01 = decode bits(15:0)            */
+    unsigned char RangeMin[2];          /* Min base address                   */
+    unsigned char RangeMax[2];          /* Max base address                   */
+    unsigned char IOAlign;              /* base alignmt, incr in 1B blocks    */
+    unsigned char IONum;                /* number of contiguous I/O ports     */
+    } S8_Pack;
+
+  struct _S9_Pack{                      /* FIXED I/O PORT PACKET              */
+    unsigned char Tag;                  /* small tag = 0x4b                   */
+    unsigned char Range[2];             /* base address 10 bits               */
+    unsigned char IONum;                /* number of contiguous I/O ports     */
+    } S9_Pack;
+
+  struct _S14_Pack{                     /* VENDOR DEFINED PACKET              */
+    unsigned char Tag;                  /* small tag = 0x7m m = 1-7           */
+    union _S14_Data{
+      unsigned char Data[7];            /* Vendor defined                     */
+      struct _S14_PPCPack{              /* Pr*p s14 pack                      */
+         unsigned char Type;            /* 00=non-IBM                         */
+         unsigned char PPCData[6];      /* Vendor defined                     */
+        } S14_PPCPack;
+      } S14_Data;
+    } S14_Pack;
+
+  struct _S15_Pack{                     /* END PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x78 or 0x79           */
+    unsigned char Check;                /* optional - checksum                */
+    } S15_Pack;
+
+  struct _L1_Pack{                      /* MEMORY RANGE PACKET                */
+    unsigned char Tag;                  /* large tag = 0x81                   */
+    unsigned char Count0;               /* x09                                */
+    unsigned char Count1;               /* x00                                */
+    unsigned char Data[9];              /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L1_Pack;
+
+  struct _L2_Pack{                      /* ANSI ID STRING PACKET              */
+    unsigned char Tag;                  /* large tag = 0x82                   */
+    unsigned char Count0;               /* Length of string                   */
+    unsigned char Count1;
+    unsigned char Identifier[1];        /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L2_Pack;
+
+  struct _L3_Pack{                      /* UNICODE ID STRING PACKET           */
+    unsigned char Tag;                  /* large tag = 0x83                   */
+    unsigned char Count0;               /* Length + 2 of string               */
+    unsigned char Count1;
+    unsigned char Country0;             /* TBD                                */
+    unsigned char Country1;             /* TBD                                */
+    unsigned char Identifier[1];        /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L3_Pack;
+
+  struct _L4_Pack{                      /* VENDOR DEFINED PACKET              */
+    unsigned char Tag;                  /* large tag = 0x84                   */
+    unsigned char Count0;
+    unsigned char Count1;
+    union _L4_Data{
+      unsigned char Data[1];            /* a variable array of bytes,         */
+                                        /* count in tag                       */
+      struct _L4_PPCPack{               /* Pr*p L4 packet                     */
+         unsigned char Type;            /* 00=non-IBM                         */
+         unsigned char PPCData[1];      /* a variable array of bytes,         */
+                                        /* count in tag                       */
+        } L4_PPCPack;
+      } L4_Data;
+    } L4_Pack;
+
+  struct _L5_Pack{
+    unsigned char Tag;                  /* large tag = 0x85                   */
+    unsigned char Count0;               /* Count = 17                         */
+    unsigned char Count1;
+    unsigned char Data[17];
+    } L5_Pack;
+
+  struct _L6_Pack{
+    unsigned char Tag;                  /* large tag = 0x86                   */
+    unsigned char Count0;               /* Count = 9                          */
+    unsigned char Count1;
+    unsigned char Data[9];
+    } L6_Pack;
+
+  } PnP_TAG_PACKET;
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ndef _PNP_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/poll.h b/include/asm-ppc/poll.h
new file mode 100644
index 000000000000..be5024913c62
--- /dev/null
+++ b/include/asm-ppc/poll.h
@@ -0,0 +1,23 @@
+#ifndef __PPC_POLL_H
+#define __PPC_POLL_H
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-ppc/posix_types.h b/include/asm-ppc/posix_types.h
new file mode 100644
index 000000000000..a14a82abe8d2
--- /dev/null
+++ b/include/asm-ppc/posix_types.h
@@ -0,0 +1,111 @@
+#ifndef _PPC_POSIX_TYPES_H
+#define _PPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef short             __kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_uid_t;
+typedef unsigned int	__kernel_old_gid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define	__FD_ZERO(set)	\
+  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+    || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned int *tmp = (unsigned int *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 8:
+				tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
+				tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
+				return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _PPC_POSIX_TYPES_H */
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h
new file mode 100644
index 000000000000..8636cdbf6f8f
--- /dev/null
+++ b/include/asm-ppc/ppc4xx_dma.h
@@ -0,0 +1,583 @@
+/*
+ * include/asm-ppc/ppc4xx_dma.h
+ *
+ * IBM PPC4xx DMA engine library
+ *
+ * Copyright 2000-2004 MontaVista Software Inc.
+ *
+ * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Original code by Armin Kuster <akuster@mvista.com>
+ * and Pete Popov <ppopov@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASMPPC_PPC4xx_DMA_H
+#define __ASMPPC_PPC4xx_DMA_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/mmu.h>
+#include <asm/ibm4xx.h>
+
+#undef DEBUG_4xxDMA
+
+#define MAX_PPC4xx_DMA_CHANNELS		4
+
+/* in arch/ppc/kernel/setup.c -- Cort */
+extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ;
+
+/*
+ * Function return status codes
+ * These values are used to indicate whether or not the function
+ * call was successful, or a bad/invalid parameter was passed.
+ */
+#define DMA_STATUS_GOOD			0
+#define DMA_STATUS_BAD_CHANNEL		1
+#define DMA_STATUS_BAD_HANDLE		2
+#define DMA_STATUS_BAD_MODE		3
+#define DMA_STATUS_NULL_POINTER		4
+#define DMA_STATUS_OUT_OF_MEMORY	5
+#define DMA_STATUS_SGL_LIST_EMPTY	6
+#define DMA_STATUS_GENERAL_ERROR	7
+#define DMA_STATUS_CHANNEL_NOTFREE	8
+
+#define DMA_CHANNEL_BUSY		0x80000000
+
+/*
+ * These indicate status as returned from the DMA Status Register.
+ */
+#define DMA_STATUS_NO_ERROR	0
+#define DMA_STATUS_CS		1	/* Count Status        */
+#define DMA_STATUS_TS		2	/* Transfer Status     */
+#define DMA_STATUS_DMA_ERROR	3	/* DMA Error Occurred  */
+#define DMA_STATUS_DMA_BUSY	4	/* The channel is busy */
+
+
+/*
+ * DMA Channel Control Registers
+ */
+
+#ifdef CONFIG_44x
+#define	PPC4xx_DMA_64BIT
+#define DMA_CR_OFFSET 1
+#else
+#define DMA_CR_OFFSET 0
+#endif
+
+#define DMA_CE_ENABLE        (1<<31)	/* DMA Channel Enable */
+#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
+#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
+
+#define DMA_CIE_ENABLE        (1<<30)	/* DMA Channel Interrupt Enable */
+#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
+#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
+
+#define DMA_TD                (1<<29)
+#define SET_DMA_TD(x)         (((x)&0x1)<<29)
+#define GET_DMA_TD(x)         (((x)&DMA_TD)>>29)
+
+#define DMA_PL                (1<<28)	/* Peripheral Location */
+#define SET_DMA_PL(x)         (((x)&0x1)<<28)
+#define GET_DMA_PL(x)         (((x)&DMA_PL)>>28)
+
+#define EXTERNAL_PERIPHERAL    0
+#define INTERNAL_PERIPHERAL    1
+
+#define SET_DMA_PW(x)     (((x)&0x3)<<(26-DMA_CR_OFFSET))	/* Peripheral Width */
+#define DMA_PW_MASK       SET_DMA_PW(3)
+#define   PW_8                 0
+#define   PW_16                1
+#define   PW_32                2
+#define   PW_64                3
+/* FIXME: Add PW_128 support for 440GP DMA block */
+#define GET_DMA_PW(x)     (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
+
+#define DMA_DAI           (1<<(25-DMA_CR_OFFSET))	/* Destination Address Increment */
+#define SET_DMA_DAI(x)    (((x)&0x1)<<(25-DMA_CR_OFFSET))
+
+#define DMA_SAI           (1<<(24-DMA_CR_OFFSET))	/* Source Address Increment */
+#define SET_DMA_SAI(x)    (((x)&0x1)<<(24-DMA_CR_OFFSET))
+
+#define DMA_BEN           (1<<(23-DMA_CR_OFFSET))	/* Buffer Enable */
+#define SET_DMA_BEN(x)    (((x)&0x1)<<(23-DMA_CR_OFFSET))
+
+#define SET_DMA_TM(x)     (((x)&0x3)<<(21-DMA_CR_OFFSET))	/* Transfer Mode */
+#define DMA_TM_MASK       SET_DMA_TM(3)
+#define   TM_PERIPHERAL        0	/* Peripheral */
+#define   TM_RESERVED          1	/* Reserved */
+#define   TM_S_MM              2	/* Memory to Memory */
+#define   TM_D_MM              3	/* Device Paced Memory to Memory */
+#define GET_DMA_TM(x)     (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
+
+#define SET_DMA_PSC(x)    (((x)&0x3)<<(19-DMA_CR_OFFSET))	/* Peripheral Setup Cycles */
+#define DMA_PSC_MASK      SET_DMA_PSC(3)
+#define GET_DMA_PSC(x)    (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
+
+#define SET_DMA_PWC(x)    (((x)&0x3F)<<(13-DMA_CR_OFFSET))	/* Peripheral Wait Cycles */
+#define DMA_PWC_MASK      SET_DMA_PWC(0x3F)
+#define GET_DMA_PWC(x)    (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
+
+#define SET_DMA_PHC(x)    (((x)&0x7)<<(10-DMA_CR_OFFSET))	/* Peripheral Hold Cycles */
+#define DMA_PHC_MASK      SET_DMA_PHC(0x7)
+#define GET_DMA_PHC(x)    (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
+
+#define DMA_ETD_OUTPUT     (1<<(9-DMA_CR_OFFSET))	/* EOT pin is a TC output */
+#define SET_DMA_ETD(x)     (((x)&0x1)<<(9-DMA_CR_OFFSET))
+
+#define DMA_TCE_ENABLE     (1<<(8-DMA_CR_OFFSET))
+#define SET_DMA_TCE(x)     (((x)&0x1)<<(8-DMA_CR_OFFSET))
+
+#define DMA_DEC            (1<<(2))	/* Address Decrement */
+#define SET_DMA_DEC(x)     (((x)&0x1)<<2)
+#define GET_DMA_DEC(x)     (((x)&DMA_DEC)>>2)
+
+
+/*
+ * Transfer Modes
+ * These modes are defined in a way that makes it possible to
+ * simply "or" in the value in the control register.
+ */
+
+#define DMA_MODE_MM		(SET_DMA_TM(TM_S_MM))	/* memory to memory */
+
+				/* Device-paced memory to memory, */
+				/* device is at source address    */
+#define DMA_MODE_MM_DEVATSRC	(DMA_TD | SET_DMA_TM(TM_D_MM))
+
+				/* Device-paced memory to memory,      */
+				/* device is at destination address    */
+#define DMA_MODE_MM_DEVATDST	(SET_DMA_TM(TM_D_MM))
+
+/* 405gp/440gp */
+#define SET_DMA_PREFETCH(x)   (((x)&0x3)<<(4-DMA_CR_OFFSET))	/* Memory Read Prefetch */
+#define DMA_PREFETCH_MASK      SET_DMA_PREFETCH(3)
+#define   PREFETCH_1           0	/* Prefetch 1 Double Word */
+#define   PREFETCH_2           1
+#define   PREFETCH_4           2
+#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
+
+#define DMA_PCE            (1<<(3-DMA_CR_OFFSET))	/* Parity Check Enable */
+#define SET_DMA_PCE(x)     (((x)&0x1)<<(3-DMA_CR_OFFSET))
+#define GET_DMA_PCE(x)     (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
+
+/* stb3x */
+
+#define DMA_ECE_ENABLE (1<<5)
+#define SET_DMA_ECE(x) (((x)&0x1)<<5)
+#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
+
+#define DMA_TCD_DISABLE	(1<<4)
+#define SET_DMA_TCD(x) (((x)&0x1)<<4)
+#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
+
+typedef uint32_t sgl_handle_t;
+
+#ifdef CONFIG_PPC4xx_EDMA
+
+#define SGL_LIST_SIZE 4096
+#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
+
+#define SET_DMA_PRIORITY(x)   (((x)&0x3)<<(6-DMA_CR_OFFSET))	/* DMA Channel Priority */
+#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
+#define PRIORITY_LOW           0
+#define PRIORITY_MID_LOW       1
+#define PRIORITY_MID_HIGH      2
+#define PRIORITY_HIGH          3
+#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
+
+/*
+ * DMA Polarity Configuration Register
+ */
+#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
+#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
+#define EOT_ActiveLow(chan)    (1<<(29-(chan*3)))	/* End of Transfer */
+
+/*
+ * DMA Sleep Mode Register
+ */
+#define SLEEP_MODE_ENABLE (1<<21)
+
+/*
+ * DMA Status Register
+ */
+#define DMA_CS0           (1<<31)	/* Terminal Count has been reached */
+#define DMA_CS1           (1<<30)
+#define DMA_CS2           (1<<29)
+#define DMA_CS3           (1<<28)
+
+#define DMA_TS0           (1<<27)	/* End of Transfer has been requested */
+#define DMA_TS1           (1<<26)
+#define DMA_TS2           (1<<25)
+#define DMA_TS3           (1<<24)
+
+#define DMA_CH0_ERR       (1<<23)	/* DMA Chanel 0 Error */
+#define DMA_CH1_ERR       (1<<22)
+#define DMA_CH2_ERR       (1<<21)
+#define DMA_CH3_ERR       (1<<20)
+
+#define DMA_IN_DMA_REQ0   (1<<19)	/* Internal DMA Request is pending */
+#define DMA_IN_DMA_REQ1   (1<<18)
+#define DMA_IN_DMA_REQ2   (1<<17)
+#define DMA_IN_DMA_REQ3   (1<<16)
+
+#define DMA_EXT_DMA_REQ0  (1<<15)	/* External DMA Request is pending */
+#define DMA_EXT_DMA_REQ1  (1<<14)
+#define DMA_EXT_DMA_REQ2  (1<<13)
+#define DMA_EXT_DMA_REQ3  (1<<12)
+
+#define DMA_CH0_BUSY      (1<<11)	/* DMA Channel 0 Busy */
+#define DMA_CH1_BUSY      (1<<10)
+#define DMA_CH2_BUSY       (1<<9)
+#define DMA_CH3_BUSY       (1<<8)
+
+#define DMA_SG0            (1<<7)	/* DMA Channel 0 Scatter/Gather in progress */
+#define DMA_SG1            (1<<6)
+#define DMA_SG2            (1<<5)
+#define DMA_SG3            (1<<4)
+
+/* DMA Channel Count Register */
+#define DMA_CTC_BTEN     (1<<23)    /* Burst Enable/Disable bit */
+#define DMA_CTC_BSIZ_MSK (3<<21)    /* Mask of the Burst size bits */
+#define DMA_CTC_BSIZ_2   (0)
+#define DMA_CTC_BSIZ_4   (1<<21)
+#define DMA_CTC_BSIZ_8   (2<<21)
+#define DMA_CTC_BSIZ_16  (3<<21)
+
+/*
+ * DMA SG Command Register
+ */
+#define SSG_ENABLE(chan)   	(1<<(31-chan))	/* Start Scatter Gather */
+#define SSG_MASK_ENABLE(chan)	(1<<(15-chan))	/* Enable writing to SSG0 bit */
+
+/*
+ * DMA Scatter/Gather Descriptor Bit fields
+ */
+#define SG_LINK            (1<<31)	/* Link */
+#define SG_TCI_ENABLE      (1<<29)	/* Enable Terminal Count Interrupt */
+#define SG_ETI_ENABLE      (1<<28)	/* Enable End of Transfer Interrupt */
+#define SG_ERI_ENABLE      (1<<27)	/* Enable Error Interrupt */
+#define SG_COUNT_MASK       0xFFFF	/* Count Field */
+
+#define SET_DMA_CONTROL \
+ 		(SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable         */ \
+ 		SET_DMA_BEN(p_init->buffer_enable)     | /* buffer enable            */\
+		SET_DMA_ETD(p_init->etd_output)        | /* end of transfer pin      */ \
+	       	SET_DMA_TCE(p_init->tce_enable)        | /* terminal count enable    */ \
+                SET_DMA_PL(p_init->pl)                 | /* peripheral location      */ \
+                SET_DMA_DAI(p_init->dai)               | /* dest addr increment      */ \
+                SET_DMA_SAI(p_init->sai)               | /* src addr increment       */ \
+                SET_DMA_PRIORITY(p_init->cp)           |  /* channel priority        */ \
+                SET_DMA_PW(p_init->pwidth)             |  /* peripheral/bus width    */ \
+                SET_DMA_PSC(p_init->psc)               |  /* peripheral setup cycles */ \
+                SET_DMA_PWC(p_init->pwc)               |  /* peripheral wait cycles  */ \
+                SET_DMA_PHC(p_init->phc)               |  /* peripheral hold cycles  */ \
+                SET_DMA_PREFETCH(p_init->pf)              /* read prefetch           */)
+
+#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
+
+#elif defined(CONFIG_STBXXX_DMA)		/* stb03xxx */
+
+#define DMA_PPC4xx_SIZE	4096
+
+/*
+ * DMA Status Register
+ */
+
+#define SET_DMA_PRIORITY(x)   (((x)&0x00800001))	/* DMA Channel Priority */
+#define DMA_PRIORITY_MASK	0x00800001
+#define   PRIORITY_LOW         	0x00000000
+#define   PRIORITY_MID_LOW     	0x00000001
+#define   PRIORITY_MID_HIGH    	0x00800000
+#define   PRIORITY_HIGH        	0x00800001
+#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
+
+#define DMA_CS0           (1<<31)	/* Terminal Count has been reached */
+#define DMA_CS1           (1<<30)
+#define DMA_CS2           (1<<29)
+#define DMA_CS3           (1<<28)
+
+#define DMA_TS0           (1<<27)	/* End of Transfer has been requested */
+#define DMA_TS1           (1<<26)
+#define DMA_TS2           (1<<25)
+#define DMA_TS3           (1<<24)
+
+#define DMA_CH0_ERR       (1<<23)	/* DMA Chanel 0 Error */
+#define DMA_CH1_ERR       (1<<22)
+#define DMA_CH2_ERR       (1<<21)
+#define DMA_CH3_ERR       (1<<20)
+
+#define DMA_CT0		  (1<<19)	/* Chained transfere */
+
+#define DMA_IN_DMA_REQ0   (1<<18)	/* Internal DMA Request is pending */
+#define DMA_IN_DMA_REQ1   (1<<17)
+#define DMA_IN_DMA_REQ2   (1<<16)
+#define DMA_IN_DMA_REQ3   (1<<15)
+
+#define DMA_EXT_DMA_REQ0  (1<<14)	/* External DMA Request is pending */
+#define DMA_EXT_DMA_REQ1  (1<<13)
+#define DMA_EXT_DMA_REQ2  (1<<12)
+#define DMA_EXT_DMA_REQ3  (1<<11)
+
+#define DMA_CH0_BUSY      (1<<10)	/* DMA Channel 0 Busy */
+#define DMA_CH1_BUSY      (1<<9)
+#define DMA_CH2_BUSY       (1<<8)
+#define DMA_CH3_BUSY       (1<<7)
+
+#define DMA_CT1            (1<<6)	/* Chained transfere */
+#define DMA_CT2            (1<<5)
+#define DMA_CT3            (1<<4)
+
+#define DMA_CH_ENABLE (1<<7)
+#define SET_DMA_CH(x) (((x)&0x1)<<7)
+#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
+
+/* STBx25xxx dma unique */
+/* enable device port on a dma channel
+ * example ext 0 on dma 1
+ */
+
+#define	SSP0_RECV	15
+#define	SSP0_XMIT	14
+#define EXT_DMA_0	12
+#define	SC1_XMIT	11
+#define SC1_RECV	10
+#define EXT_DMA_2	9
+#define	EXT_DMA_3	8
+#define SERIAL2_XMIT	7
+#define SERIAL2_RECV	6
+#define SC0_XMIT 	5
+#define	SC0_RECV	4
+#define	SERIAL1_XMIT	3
+#define SERIAL1_RECV	2
+#define	SERIAL0_XMIT	1
+#define SERIAL0_RECV	0
+
+#define DMA_CHAN_0	1
+#define DMA_CHAN_1	2
+#define DMA_CHAN_2	3
+#define DMA_CHAN_3	4
+
+/* end STBx25xx */
+
+/*
+ * Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
+ */
+#define DMA_CR_MB0 0x2
+
+#define SET_DMA_CONTROL \
+       		(SET_DMA_CIE_ENABLE(p_init->int_enable) |  /* interrupt enable         */ \
+		SET_DMA_ETD(p_init->etd_output)        |  /* end of transfer pin      */ \
+		SET_DMA_TCE(p_init->tce_enable)        |  /* terminal count enable    */ \
+		SET_DMA_PL(p_init->pl)                 |  /* peripheral location      */ \
+		SET_DMA_DAI(p_init->dai)               |  /* dest addr increment      */ \
+		SET_DMA_SAI(p_init->sai)               |  /* src addr increment       */ \
+		SET_DMA_PRIORITY(p_init->cp)           |  /* channel priority        */  \
+		SET_DMA_PW(p_init->pwidth)             |  /* peripheral/bus width    */ \
+		SET_DMA_PSC(p_init->psc)               |  /* peripheral setup cycles */ \
+		SET_DMA_PWC(p_init->pwc)               |  /* peripheral wait cycles  */ \
+		SET_DMA_PHC(p_init->phc)               |  /* peripheral hold cycles  */ \
+		SET_DMA_TCD(p_init->tcd_disable)	  |  /* TC chain mode disable   */ \
+		SET_DMA_ECE(p_init->ece_enable)	  |  /* ECE chanin mode enable  */ \
+		SET_DMA_CH(p_init->ch_enable)	|    /* Chain enable 	        */ \
+		DMA_CR_MB0				/* must be one */)
+
+#define GET_DMA_POLARITY(chan) chan
+
+#endif
+
+typedef struct {
+	unsigned short in_use;	/* set when channel is being used, clr when
+				 * available.
+				 */
+	/*
+	 * Valid polarity settings:
+	 *   DMAReq_ActiveLow(n)
+	 *   DMAAck_ActiveLow(n)
+	 *   EOT_ActiveLow(n)
+	 *
+	 *   n is 0 to max dma chans
+	 */
+	unsigned int polarity;
+
+	char buffer_enable;	/* Boolean: buffer enable            */
+	char tce_enable;	/* Boolean: terminal count enable    */
+	char etd_output;	/* Boolean: eot pin is a tc output   */
+	char pce;		/* Boolean: parity check enable      */
+
+	/*
+	 * Peripheral location:
+	 * INTERNAL_PERIPHERAL (UART0 on the 405GP)
+	 * EXTERNAL_PERIPHERAL
+	 */
+	char pl;		/* internal/external peripheral      */
+
+	/*
+	 * Valid pwidth settings:
+	 *   PW_8
+	 *   PW_16
+	 *   PW_32
+	 *   PW_64
+	 */
+	unsigned int pwidth;
+
+	char dai;		/* Boolean: dst address increment   */
+	char sai;		/* Boolean: src address increment   */
+
+	/*
+	 * Valid psc settings: 0-3
+	 */
+	unsigned int psc;	/* Peripheral Setup Cycles         */
+
+	/*
+	 * Valid pwc settings:
+	 * 0-63
+	 */
+	unsigned int pwc;	/* Peripheral Wait Cycles          */
+
+	/*
+	 * Valid phc settings:
+	 * 0-7
+	 */
+	unsigned int phc;	/* Peripheral Hold Cycles          */
+
+	/*
+	 * Valid cp (channel priority) settings:
+	 *   PRIORITY_LOW
+	 *   PRIORITY_MID_LOW
+	 *   PRIORITY_MID_HIGH
+	 *   PRIORITY_HIGH
+	 */
+	unsigned int cp;	/* channel priority                */
+
+	/*
+	 * Valid pf (memory read prefetch) settings:
+	 *
+	 *   PREFETCH_1
+	 *   PREFETCH_2
+	 *   PREFETCH_4
+	 */
+	unsigned int pf;	/* memory read prefetch            */
+
+	/*
+	 * Boolean: channel interrupt enable
+	 * NOTE: for sgl transfers, only the last descriptor will be setup to
+	 * interrupt.
+	 */
+	char int_enable;
+
+	char shift;		/* easy access to byte_count shift, based on */
+	/* the width of the channel                  */
+
+	uint32_t control;	/* channel control word                      */
+
+	/* These variabled are used ONLY in single dma transfers              */
+	unsigned int mode;	/* transfer mode                     */
+	phys_addr_t addr;
+	char ce;		/* channel enable */
+#ifdef CONFIG_STB03xxx
+	char ch_enable;
+	char tcd_disable;
+	char ece_enable;
+	char td;		/* transfer direction */
+#endif
+
+	char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
+} ppc_dma_ch_t;
+
+/*
+ * PPC44x DMA implementations have a slightly different
+ * descriptor layout.  Probably moved about due to the
+ * change to 64-bit addresses and link pointer. I don't
+ * know why they didn't just leave control_count after
+ * the dst_addr.
+ */
+#ifdef PPC4xx_DMA_64BIT
+typedef struct {
+	uint32_t control;
+	uint32_t control_count;
+	phys_addr_t src_addr;
+	phys_addr_t dst_addr;
+	phys_addr_t next;
+} ppc_sgl_t;
+#else
+typedef struct {
+	uint32_t control;
+	phys_addr_t src_addr;
+	phys_addr_t dst_addr;
+	uint32_t control_count;
+	uint32_t next;
+} ppc_sgl_t;
+#endif
+
+typedef struct {
+	unsigned int dmanr;
+	uint32_t control;	/* channel ctrl word; loaded from each descrptr */
+	uint32_t sgl_control;	/* LK, TCI, ETI, and ERI bits in sgl descriptor */
+	dma_addr_t dma_addr;	/* dma (physical) address of this list          */
+	ppc_sgl_t *phead;
+	dma_addr_t phead_dma;
+	ppc_sgl_t *ptail;
+	dma_addr_t ptail_dma;
+} sgl_list_info_t;
+
+typedef struct {
+	phys_addr_t *src_addr;
+	phys_addr_t *dst_addr;
+	phys_addr_t dma_src_addr;
+	phys_addr_t dma_dst_addr;
+} pci_alloc_desc_t;
+
+extern ppc_dma_ch_t dma_channels[];
+
+/*
+ * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
+ */
+extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
+extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
+extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
+extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
+extern void ppc4xx_set_sg_addr(int, phys_addr_t);
+extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
+extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
+extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
+extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
+extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
+extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
+extern void ppc4xx_free_dma_handle(sgl_handle_t);
+extern int ppc4xx_get_dma_status(void);
+extern int ppc4xx_enable_burst(unsigned int);
+extern int ppc4xx_disable_burst(unsigned int);
+extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
+extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
+extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
+extern void ppc4xx_enable_dma(unsigned int dmanr);
+extern void ppc4xx_disable_dma(unsigned int dmanr);
+extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
+extern int ppc4xx_get_dma_residue(unsigned int dmanr);
+extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
+				 phys_addr_t dst_dma_addr);
+extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
+extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
+extern int ppc4xx_clr_dma_status(unsigned int dmanr);
+extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
+extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
+extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+#endif
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_pic.h b/include/asm-ppc/ppc4xx_pic.h
new file mode 100644
index 000000000000..c16c7f81cfd8
--- /dev/null
+++ b/include/asm-ppc/ppc4xx_pic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-ppc/ppc4xx_pic.h
+ *
+ * Interrupt controller driver for PowerPC 4xx-based processors.
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef	__PPC4XX_PIC_H__
+#define	__PPC4XX_PIC_H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+
+/* "Fixed" UIC settings (they are chip, not board specific),
+ * e.g. polarity/triggerring for internal interrupt sources.
+ *
+ * Platform port should provide NR_UICS-sized array named ppc4xx_core_uic_cfg
+ * with these "fixed" settings: .polarity contains exact value which will
+ * be written (masked with "ext_irq_mask") into UICx_PR register,
+ * .triggering - to UICx_TR.
+ *
+ * Settings for external IRQs can be specified separately by the
+ * board support code. In this case properly sized array of unsigned
+ * char named ppc4xx_uic_ext_irq_cfg should be filled with correct
+ * values using IRQ_SENSE_XXXXX and IRQ_POLARITY_XXXXXXX defines.
+ *
+ * If these arrays aren't provided, UIC initialization code keeps firmware
+ * configuration. Also, ppc4xx_uic_ext_irq_cfg implies ppc4xx_core_uic_cfg
+ * is defined.
+ *
+ * Both ppc4xx_core_uic_cfg and ppc4xx_uic_ext_irq_cfg are declared as
+ * "weak" symbols in ppc4xx_pic.c
+ *
+ */
+struct ppc4xx_uic_settings {
+	u32 polarity;
+	u32 triggering;
+	u32 ext_irq_mask;
+};
+
+extern void ppc4xx_pic_init(void);
+
+#endif				/* __PPC4XX_PIC_H__ */
diff --git a/include/asm-ppc/ppc_asm.h b/include/asm-ppc/ppc_asm.h
new file mode 100644
index 000000000000..13fa8e7483c1
--- /dev/null
+++ b/include/asm-ppc/ppc_asm.h
@@ -0,0 +1,342 @@
+/*
+ * include/asm-ppc/ppc_asm.h
+ *
+ * Definitions used by various bits of low-level assembly code on PowerPC.
+ *
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+				SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
+				REST_10GPRS(22, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VR(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VR(n,b,base)	SAVE_2VR(n,b,base); SAVE_2VR(n+2,b,base)
+#define SAVE_8VR(n,b,base)	SAVE_4VR(n,b,base); SAVE_4VR(n+4,b,base)
+#define SAVE_16VR(n,b,base)	SAVE_8VR(n,b,base); SAVE_8VR(n+8,b,base)
+#define SAVE_32VR(n,b,base)	SAVE_16VR(n,b,base); SAVE_16VR(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VR(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VR(n,b,base)	REST_2VR(n,b,base); REST_2VR(n+2,b,base)
+#define REST_8VR(n,b,base)	REST_4VR(n,b,base); REST_4VR(n+4,b,base)
+#define REST_16VR(n,b,base)	REST_8VR(n,b,base); REST_8VR(n+8,b,base)
+#define REST_32VR(n,b,base)	REST_16VR(n,b,base); REST_16VR(n+16,b,base)
+
+#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVR(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVR(n,s,base)	SAVE_2EVR(n,s,base); SAVE_2EVR(n+2,s,base)
+#define SAVE_8EVR(n,s,base)	SAVE_4EVR(n,s,base); SAVE_4EVR(n+4,s,base)
+#define SAVE_16EVR(n,s,base)	SAVE_8EVR(n,s,base); SAVE_8EVR(n+8,s,base)
+#define SAVE_32EVR(n,s,base)	SAVE_16EVR(n,s,base); SAVE_16EVR(n+16,s,base)
+
+#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVR(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVR(n,s,base)	REST_2EVR(n,s,base); REST_2EVR(n+2,s,base)
+#define REST_8EVR(n,s,base)	REST_4EVR(n,s,base); REST_4EVR(n+4,s,base)
+#define REST_16EVR(n,s,base)	REST_8EVR(n,s,base); REST_8EVR(n+8,s,base)
+#define REST_32EVR(n,s,base)	REST_16EVR(n,s,base); REST_16EVR(n+16,s,base)
+
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+#ifdef CONFIG_BOOKE
+#define tophys(rd,rs)				\
+	addis	rd,rs,0
+
+#define tovirt(rd,rs)				\
+	addis	rd,rs,0
+
+#else  /* CONFIG_BOOKE */
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+#endif  /* CONFIG_BOOKE */
+
+/*
+ * On 64-bit cpus, we use the rfid instruction instead of rfi, but
+ * we then have to make sure we preserve the top 32 bits except for
+ * the 64-bit mode bit, which we clear.
+ */
+#ifdef CONFIG_PPC64BRIDGE
+#define	FIX_SRR1(ra, rb)	\
+	mr	rb,ra;		\
+	mfmsr	ra;		\
+	clrldi	ra,ra,1;		/* turn off 64-bit mode */ \
+	rldimi	ra,rb,0,32
+#define	RFI		.long	0x4c000024	/* rfid instruction */
+#define MTMSRD(r)	.long	(0x7c000164 + ((r) << 21))	/* mtmsrd */
+#define CLR_TOP32(r)	rlwinm	(r),(r),0,0,31	/* clear top 32 bits */
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define	RFI		rfi
+#else
+#define RFI		rfi; b .	/* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif /* CONFIG_PPC64BRIDGE */
+
+#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
+
+#ifdef CONFIG_IBM405_ERR77
+#define PPC405_ERR77(ra,rb)	dcbt	ra, rb;
+#define	PPC405_ERR77_SYNC	sync;
+#else
+#define PPC405_ERR77(ra,rb)
+#define PPC405_ERR77_SYNC
+#endif
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+#define	evr0	0
+#define	evr1	1
+#define	evr2	2
+#define	evr3	3
+#define	evr4	4
+#define	evr5	5
+#define	evr6	6
+#define	evr7	7
+#define	evr8	8
+#define	evr9	9
+#define	evr10	10
+#define	evr11	11
+#define	evr12	12
+#define	evr13	13
+#define	evr14	14
+#define	evr15	15
+#define	evr16	16
+#define	evr17	17
+#define	evr18	18
+#define	evr19	19
+#define	evr20	20
+#define	evr21	21
+#define	evr22	22
+#define	evr23	23
+#define	evr24	24
+#define	evr25	25
+#define	evr26	26
+#define	evr27	27
+#define	evr28	28
+#define	evr29	29
+#define	evr30	30
+#define	evr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
new file mode 100644
index 000000000000..24b991c42769
--- /dev/null
+++ b/include/asm-ppc/ppc_sys.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-ppc/ppc_sys.h
+ *
+ * PPC system definitions and library functions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_SYS_H
+#define __ASM_PPC_SYS_H
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_MPC52xx)
+#include <asm/mpc52xx.h>
+#else
+#error "need definition of ppc_sys_devices"
+#endif
+
+struct ppc_sys_spec {
+	/* PPC sys is matched via (ID & mask) == value, id could be
+	 * PVR, SVR, IMMR, * etc. */
+	u32 			mask;
+	u32 			value;
+	u32 			num_devices;
+	char 			*ppc_sys_name;
+	enum ppc_sys_devices 	*device_list;
+};
+
+/* describes all specific chips and which devices they have on them */
+extern struct ppc_sys_spec ppc_sys_specs[];
+extern struct ppc_sys_spec *cur_ppc_sys_spec;
+
+/* determine which specific SOC we are */
+extern void identify_ppc_sys_by_id(u32 id) __init;
+extern void identify_ppc_sys_by_name(char *name) __init;
+
+/* describes all devices that may exist in a given family of processors */
+extern struct platform_device ppc_sys_platform_devices[];
+
+/* allow any platform_device fixup to occur before device is registered */
+extern int (*ppc_sys_device_fixup) (struct platform_device * pdev);
+
+/* Update all memory resources by paddr, call before platform_device_register */
+extern void ppc_sys_fixup_mem_resource(struct platform_device *pdev,
+				       phys_addr_t paddr) __init;
+
+/* Get platform_data pointer out of platform device, call before platform_device_register */
+extern void *ppc_sys_get_pdata(enum ppc_sys_devices dev) __init;
+
+/* remove a device from the system */
+extern void ppc_sys_device_remove(enum ppc_sys_devices dev);
+
+#endif				/* __ASM_PPC_SYS_H */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
new file mode 100644
index 000000000000..fe24e4520208
--- /dev/null
+++ b/include/asm-ppc/ppcboot.h
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_PPCBOOT_H__
+#define __ASM_PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(CONFIG_8xx) || defined(CONFIG_CPM2) || defined(CONFIG_85xx) ||\
+	defined(CONFIG_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(CONFIG_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(CONFIG_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(CONFIG_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
+	defined(CONFIG_83xx)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX) || defined(CONFIG_85xx)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#endif
+#if defined(CONFIG_440GX)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#endif
+#if defined(CONFIG_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(CONFIG_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+#endif	/* __ASM_PPCBOOT_H__ */
diff --git a/include/asm-ppc/prep_nvram.h b/include/asm-ppc/prep_nvram.h
new file mode 100644
index 000000000000..6dbc36a84df2
--- /dev/null
+++ b/include/asm-ppc/prep_nvram.h
@@ -0,0 +1,153 @@
+/*
+ * PreP compliant NVRAM access
+ */
+
+/* Corey Minyard (minyard@acm.org) - Stolen from PReP book.   Per the
+   license I must say:
+     (C) Copyright (Corey Minyard), (1998).  All rights reserved
+ */
+
+/* Structure map for NVRAM on PowerPC Reference Platform */
+/* All fields are either character/byte strings which are valid either
+  endian or they are big-endian numbers.
+
+  There are a number of Date and Time fields which are in RTC format,
+  big-endian. These are stored in UT (GMT).
+
+  For enum's: if given in hex then they are bit significant, i.e. only
+  one bit is on for each enum.
+*/
+#ifdef __KERNEL__
+#ifndef _PPC_PREP_NVRAM_H
+#define _PPC_PREP_NVRAM_H
+
+#define MAX_PREP_NVRAM 0x8000
+#define PREP_NVRAM_AS0	0x74
+#define PREP_NVRAM_AS1	0x75
+#define PREP_NVRAM_DATA	0x77
+
+#define NVSIZE 4096	/* size of NVRAM */
+#define OSAREASIZE 512	/* size of OSArea space */
+#define CONFSIZE 1024	/* guess at size of Configuration space */
+
+typedef struct _SECURITY {
+  unsigned long BootErrCnt;	    /* Count of boot password errors */
+  unsigned long ConfigErrCnt;	    /* Count of config password errors */
+  unsigned long BootErrorDT[2];	    /* Date&Time from RTC of last error in pw */
+  unsigned long ConfigErrorDT[2];   /* Date&Time from RTC of last error in pw */
+  unsigned long BootCorrectDT[2];   /* Date&Time from RTC of last correct pw */
+  unsigned long ConfigCorrectDT[2]; /* Date&Time from RTC of last correct pw */
+  unsigned long BootSetDT[2];	    /* Date&Time from RTC of last set of pw */
+  unsigned long ConfigSetDT[2];	    /* Date&Time from RTC of last set of pw */
+  unsigned char Serial[16];	    /* Box serial number */
+} SECURITY;
+
+typedef enum _OS_ID {
+  Unknown = 0,
+  Firmware = 1,
+  AIX = 2,
+  NT = 3,
+  MKOS2 = 4,
+  MKAIX = 5,
+  Taligent = 6,
+  Solaris = 7,
+  MK = 12
+} OS_ID;
+
+typedef struct _ERROR_LOG {
+  unsigned char ErrorLogEntry[40]; /* To be architected */
+} ERROR_LOG;
+
+typedef enum _BOOT_STATUS {
+  BootStarted = 0x01,
+  BootFinished = 0x02,
+  RestartStarted = 0x04,
+  RestartFinished = 0x08,
+  PowerFailStarted = 0x10,
+  PowerFailFinished = 0x20,
+  ProcessorReady = 0x40,
+  ProcessorRunning = 0x80,
+  ProcessorStart = 0x0100
+} BOOT_STATUS;
+
+typedef struct _RESTART_BLOCK {
+  unsigned short Version;
+  unsigned short Revision;
+  unsigned long ResumeReserve1[2];
+  volatile unsigned long BootStatus;
+  unsigned long CheckSum; /* Checksum of RESTART_BLOCK */
+  void * RestartAddress;
+  void * SaveAreaAddr;
+  unsigned long SaveAreaLength;
+} RESTART_BLOCK;
+
+typedef enum _OSAREA_USAGE {
+  Empty = 0,
+  Used = 1
+} OSAREA_USAGE;
+
+typedef enum _PM_MODE {
+  Suspend = 0x80, /* Part of state is in memory */
+  Normal = 0x00   /* No power management in effect */
+} PMMODE;
+
+typedef struct _HEADER {
+  unsigned short Size;       /* NVRAM size in K(1024) */
+  unsigned char Version;     /* Structure map different */
+  unsigned char Revision;    /* Structure map the same -may
+                                be new values in old fields
+                                in other words old code still works */
+  unsigned short Crc1;       /* check sum from beginning of nvram to OSArea */
+  unsigned short Crc2;       /* check sum of config */
+  unsigned char LastOS;      /* OS_ID */
+  unsigned char Endian;      /* B if big endian, L if little endian */
+  unsigned char OSAreaUsage; /* OSAREA_USAGE */
+  unsigned char PMMode;      /* Shutdown mode */
+  RESTART_BLOCK RestartBlock;
+  SECURITY Security;
+  ERROR_LOG ErrorLog[2];
+
+  /* Global Environment information */
+  void * GEAddress;
+  unsigned long GELength;
+
+  /* Date&Time from RTC of last change to Global Environment */
+  unsigned long GELastWriteDT[2];
+
+  /* Configuration information */
+  void * ConfigAddress;
+  unsigned long ConfigLength;
+
+  /* Date&Time from RTC of last change to Configuration */
+  unsigned long ConfigLastWriteDT[2];
+  unsigned long ConfigCount; /* Count of entries in Configuration */
+
+  /* OS dependent temp area */
+  void * OSAreaAddress;
+  unsigned long OSAreaLength;
+
+  /* Date&Time from RTC of last change to OSAreaArea */
+  unsigned long OSAreaLastWriteDT[2];
+} HEADER;
+
+/* Here is the whole map of the NVRAM */
+typedef struct _NVRAM_MAP {
+  HEADER Header;
+  unsigned char GEArea[NVSIZE-CONFSIZE-OSAREASIZE-sizeof(HEADER)];
+  unsigned char OSArea[OSAREASIZE];
+  unsigned char ConfigArea[CONFSIZE];
+} NVRAM_MAP;
+
+/* Routines to manipulate the NVRAM */
+void init_prep_nvram(void);
+char *prep_nvram_get_var(const char *name);
+char *prep_nvram_first_var(void);
+char *prep_nvram_next_var(char *name);
+
+/* Routines to read and write directly to the NVRAM */
+unsigned char prep_nvram_read_val(int addr);
+void prep_nvram_write_val(int           addr,
+			  unsigned char val);
+
+#endif /* _PPC_PREP_NVRAM_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
new file mode 100644
index 000000000000..b05b5d9cae20
--- /dev/null
+++ b/include/asm-ppc/processor.h
@@ -0,0 +1,201 @@
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_PROCESSOR_H
+#define __ASM_PPC_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <linux/stringify.h>
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/mpc8xx.h>
+#include <asm/reg.h>
+
+/* We only need to define a new _MACH_xxx for machines which are part of
+ * a configuration which supports more than one type of different machine.
+ * This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac.
+ * -- Tom
+ */
+#define _MACH_prep	0x00000001
+#define _MACH_Pmac	0x00000002	/* pmac or pmac clone (non-chrp) */
+#define _MACH_chrp	0x00000004	/* chrp machine */
+
+/* see residual.h for these */
+#define _PREP_Motorola	0x01	/* motorola prep */
+#define _PREP_Firm	0x02	/* firmworks prep */
+#define _PREP_IBM	0x00	/* ibm prep */
+#define _PREP_Bull	0x03	/* bull prep */
+
+/* these are arbitrary */
+#define _CHRP_Motorola	0x04	/* motorola chrp, the cobra */
+#define _CHRP_IBM	0x05	/* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos	0x06	/* Genesi/bplan's Pegasos and Pegasos2 */
+
+#define _GLOBAL(n)\
+	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
+	.globl n;\
+n:
+
+/*
+ * this is the minimum allowable io space due to the location
+ * of the io areas on prep (first one at 0x80000000) but
+ * as soon as I get around to remapping the io areas with the BATs
+ * to match the mac we can raise this. -- Cort
+ */
+#define TASK_SIZE	(CONFIG_TASK_SIZE)
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_MULTIPLATFORM
+extern int _machine;
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+extern int _chrp_type;
+
+/*
+ * This is used to identify the board type from a given PReP board
+ * vendor. Board revision is also made available.
+ */
+extern unsigned char ucSystemType;
+extern unsigned char ucBoardRev;
+extern unsigned char ucBoardRevMaj, ucBoardRevMin;
+#else
+#define _machine 0
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * Create a new kernel thread.
+ */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_spe;
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+	void		*pgdir;		/* root of page-table tree */
+	int		fpexc_mode;	/* floating-point exception mode */
+	signed long	last_syscall;
+#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
+	unsigned long	dbcr0;		/* debug control register values */
+	unsigned long	dbcr1;
+#endif
+	double		fpr[32];	/* Complete floating point set */
+	unsigned long	fpscr_pad;	/* fpr ... fpscr must be contiguous */
+	unsigned long	fpscr;		/* Floating point status */
+#ifdef CONFIG_ALTIVEC
+	/* Complete AltiVec register set */
+	vector128	vr[32] __attribute((aligned(16)));
+	/* AltiVec status */
+	vector128	vscr __attribute((aligned(16)));
+	unsigned long	vrsave;
+	int		used_vr;	/* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
+	u64		acc;		/* Accumulator */
+	unsigned long	spefscr;	/* SPE & eFP status */
+	int		used_spe;	/* set if process has used spe */
+#endif /* CONFIG_SPE */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD { \
+	.ksp = INIT_SP, \
+	.fs = KERNEL_DS, \
+	.pgdir = swapper_pg_dir, \
+	.fpexc_mode = MSR_FE0 | MSR_FE1, \
+}
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk)	\
+	((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)	((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk)	((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr)	get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val)	set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned int msr_bits)
+{
+	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned int __pack_fe01(unsigned int fpmode)
+{
+	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+/* in process.c - for early bootup debug -- Cort */
+int ll_printk(const char *, ...);
+void ll_puts(const char *);
+
+/* In misc.c */
+void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#define have_of (_machine == _MACH_chrp || _machine == _MACH_Pmac)
+
+#define cpu_relax()	barrier()
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+extern inline void prefetch(const void *x)
+{
+	 __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+extern inline void prefetchw(const void *x)
+{
+	 __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern int emulate_altivec(struct pt_regs *regs);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PPC_PROCESSOR_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
new file mode 100644
index 000000000000..56394c6cf52e
--- /dev/null
+++ b/include/asm-ppc/prom.h
@@ -0,0 +1,143 @@
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_PROM_H
+#define _PPC_PROM_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+extern char *prom_display_paths[];
+extern unsigned int prom_num_displays;
+
+struct address_range {
+	unsigned int space;
+	unsigned int address;
+	unsigned int size;
+};
+
+struct interrupt_info {
+	int	line;
+	int	sense;		/* +ve/-ve logic, edge or level, etc. */
+};
+
+struct reg_property {
+	unsigned int address;
+	unsigned int size;
+};
+
+struct property {
+	char	*name;
+	int	length;
+	unsigned char *value;
+	struct property *next;
+};
+
+/*
+ * Note: don't change this structure for now or you'll break BootX !
+ */
+struct device_node {
+	char	*name;
+	char	*type;
+	phandle	node;
+	int	n_addrs;
+	struct	address_range *addrs;
+	int	n_intrs;
+	struct	interrupt_info *intrs;
+	char	*full_name;
+	struct	property *properties;
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+};
+
+struct prom_args;
+typedef void (*prom_entry)(struct prom_args *);
+
+/* OBSOLETE: Old style node lookup */
+extern struct device_node *find_devices(const char *name);
+extern struct device_node *find_type_devices(const char *type);
+extern struct device_node *find_path_device(const char *path);
+extern struct device_node *find_compatible_devices(const char *type,
+						   const char *compat);
+extern struct device_node *find_all_nodes(void);
+
+/* New style node lookup */
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name);
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type);
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+					     struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* Other Prototypes */
+extern void abort(void);
+extern unsigned long prom_init(int, int, prom_entry);
+extern void prom_print(const char *msg);
+extern void relocate_nodes(void);
+extern void finish_device_tree(void);
+extern int device_is_compatible(struct device_node *device, const char *);
+extern int machine_is_compatible(const char *compat);
+extern unsigned char *get_property(struct device_node *node, const char *name,
+				   int *lenp);
+extern void prom_add_property(struct device_node* np, struct property* prop);
+extern void prom_get_irq_senses(unsigned char *, int, int);
+extern int prom_n_addr_cells(struct device_node* np);
+extern int prom_n_size_cells(struct device_node* np);
+
+extern struct resource*
+request_OF_resource(struct device_node* node, int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+extern void print_properties(struct device_node *node);
+extern int call_rtas(const char *service, int nargs, int nret,
+		     unsigned long *outputs, ...);
+
+/*
+ * PCI <-> OF matching functions
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+
+/*
+ * When we call back to the Open Firmware client interface, we usually
+ * have to do that before the kernel is relocated to its final location
+ * (this is because we can't use OF after we have overwritten the
+ * exception vectors with our exception handlers).  These macros assist
+ * in performing the address calculations that we need to do to access
+ * data when the kernel is running at an address that is different from
+ * the address that the kernel is linked at.  The reloc_offset() function
+ * returns the difference between these two addresses and the macros
+ * simplify the process of adding or subtracting this offset to/from
+ * pointer values.  See arch/ppc/kernel/prom.c for how these are used.
+ */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern unsigned long sub_reloc_offset(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x))add_reloc_offset((unsigned long)(x)))
+#define PTRUNRELOC(x)	((typeof(x))sub_reloc_offset((unsigned long)(x)))
+
+#endif /* _PPC_PROM_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ptrace.h b/include/asm-ppc/ptrace.h
new file mode 100644
index 000000000000..9d4e4ea530c3
--- /dev/null
+++ b/include/asm-ppc/ptrace.h
@@ -0,0 +1,145 @@
+#ifndef _PPC_PTRACE_H
+#define _PPC_PTRACE_H
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/ppc/kernel/ptrace.c.
+ */
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result; 		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	64
+
+#ifndef __ASSEMBLY__
+#define instruction_pointer(regs) ((regs)->nip)
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+
+#define force_successful_syscall_return()   \
+	do { \
+		current_thread_info()->local_flags |= _TIFL_FORCE_NOERROR; \
+	} while(0)
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) == 0)
+#define TRAP(regs)		((regs)->trap & ~0xF)
+
+#define CHECK_FULL_REGS(regs)						      \
+do {									      \
+	if ((regs)->trap & 1)						      \
+		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#ifdef __KERNEL__
+#define PT_ORIG_R3 34
+#endif
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#define PT_MQ	39
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+/* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+#endif
diff --git a/include/asm-ppc/raven.h b/include/asm-ppc/raven.h
new file mode 100644
index 000000000000..66f52cc0a03c
--- /dev/null
+++ b/include/asm-ppc/raven.h
@@ -0,0 +1,35 @@
+/*
+ *  include/asm-ppc/raven.h -- Raven MPIC chip.
+ *
+ *  Copyright (C) 1998 Johnnie Peters
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASMPPC_RAVEN_H
+#define _ASMPPC_RAVEN_H
+
+#define MVME2600_INT_SIO		0
+#define MVME2600_INT_FALCN_ECC_ERR	1
+#define MVME2600_INT_PCI_ETHERNET	2
+#define MVME2600_INT_PCI_SCSI		3
+#define MVME2600_INT_PCI_GRAPHICS	4
+#define MVME2600_INT_PCI_VME0		5
+#define MVME2600_INT_PCI_VME1		6
+#define MVME2600_INT_PCI_VME2		7
+#define MVME2600_INT_PCI_VME3		8
+#define MVME2600_INT_PCI_INTA		9
+#define MVME2600_INT_PCI_INTB		10
+#define MVME2600_INT_PCI_INTC 		11
+#define MVME2600_INT_PCI_INTD 		12
+#define MVME2600_INT_LM_SIG0		13
+#define MVME2600_INT_LM_SIG1		14
+
+extern struct hw_interrupt_type raven_pic;
+
+extern int raven_init(void);
+#endif /* _ASMPPC_RAVEN_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h
new file mode 100644
index 000000000000..3372dee36a8c
--- /dev/null
+++ b/include/asm-ppc/reg.h
@@ -0,0 +1,444 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REGS_H__
+#define __ASM_PPC_REGS_H__
+
+#include <linux/stringify.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif
+
+/* Machine State Register (MSR) Fields */
+#define MSR_SF		(1<<63)
+#define MSR_ISF		(1<<61)
+#define MSR_VEC		(1<<25)		/* Enable AltiVec */
+#define MSR_POW		(1<<18)		/* Enable Power Management */
+#define MSR_WE		(1<<18)		/* Wait State Enable */
+#define MSR_TGPR	(1<<17)		/* TLB Update registers in use */
+#define MSR_CE		(1<<17)		/* Critical Interrupt Enable */
+#define MSR_ILE		(1<<16)		/* Interrupt Little Endian */
+#define MSR_EE		(1<<15)		/* External Interrupt Enable */
+#define MSR_PR		(1<<14)		/* Problem State / Privilege Level */
+#define MSR_FP		(1<<13)		/* Floating Point enable */
+#define MSR_ME		(1<<12)		/* Machine Check Enable */
+#define MSR_FE0		(1<<11)		/* Floating Exception mode 0 */
+#define MSR_SE		(1<<10)		/* Single Step */
+#define MSR_BE		(1<<9)		/* Branch Trace */
+#define MSR_DE		(1<<9)		/* Debug Exception Enable */
+#define MSR_FE1		(1<<8)		/* Floating Exception mode 1 */
+#define MSR_IP		(1<<6)		/* Exception prefix 0x000/0xFFF */
+#define MSR_IR		(1<<5)		/* Instruction Relocate */
+#define MSR_DR		(1<<4)		/* Data Relocate */
+#define MSR_PE		(1<<3)		/* Protection Enable */
+#define MSR_PX		(1<<2)		/* Protection Exclusive Mode */
+#define MSR_RI		(1<<1)		/* Recoverable Exception */
+#define MSR_LE		(1<<0)		/* Little Endian */
+
+/* Default MSR for kernel mode. */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define MSR_KERNEL	(MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#ifndef MSR_KERNEL
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX	0x80000000	/* FPU exception summary */
+#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
+#define FPSCR_VX	0x20000000	/* Invalid operation summary */
+#define FPSCR_OX	0x10000000	/* Overflow exception summary */
+#define FPSCR_UX	0x08000000	/* Underflow exception summary */
+#define FPSCR_ZX	0x04000000	/* Zero-devide exception summary */
+#define FPSCR_XX	0x02000000	/* Inexact exception summary */
+#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
+#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
+#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
+#define FPSCR_FR	0x00040000	/* Fraction rounded */
+#define FPSCR_FI	0x00020000	/* Fraction inexact */
+#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
+#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
+#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
+#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
+#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
+#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
+#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
+#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
+#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
+#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
+#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
+#define FPSCR_RN	0x00000003	/* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR	0x009	/* Count Register */
+#define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
+#define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
+#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L	0x239	/* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U	0x238	/* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L	0x23B	/* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U	0x23A	/* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L	0x23D	/* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U	0x23C	/* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L	0x23F	/* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U	0x23E	/* Data BAT 7 Upper Register */
+
+#define SPRN_DEC	0x016		/* Decrement Register */
+#define SPRN_DER	0x095		/* Debug Enable Regsiter */
+#define DER_RSTE	0x40000000	/* Reset Interrupt */
+#define DER_CHSTPE	0x20000000	/* Check Stop */
+#define DER_MCIE	0x10000000	/* Machine Check Interrupt */
+#define DER_EXTIE	0x02000000	/* External Interrupt */
+#define DER_ALIE	0x01000000	/* Alignment Interrupt */
+#define DER_PRIE	0x00800000	/* Program Interrupt */
+#define DER_FPUVIE	0x00400000	/* FP Unavailable Interrupt */
+#define DER_DECIE	0x00200000	/* Decrementer Interrupt */
+#define DER_SYSIE	0x00040000	/* System Call Interrupt */
+#define DER_TRE		0x00020000	/* Trace Interrupt */
+#define DER_SEIE	0x00004000	/* FP SW Emulation Interrupt */
+#define DER_ITLBMSE	0x00002000	/* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE	0x00001000	/* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE	0x00000800	/* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE	0x00000400	/* Imp. Spec. Data TLB Error */
+#define DER_LBRKE	0x00000008	/* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE	0x00000004	/* Instruction Breakpoint Interrupt */
+#define DER_EBRKE	0x00000002	/* External Breakpoint Interrupt */
+#define DER_DPIE	0x00000001	/* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS	0x3D0		/* Data TLB Miss Register */
+#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define SPRN_EAR	0x11A		/* External Address Register */
+#define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
+#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
+#define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
+#define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
+#define HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
+#define HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
+#define HID0_SBCLK	(1<<27)
+#define HID0_EICE	(1<<26)
+#define HID0_TBEN	(1<<26)		/* Timebase enable - 745x */
+#define HID0_ECLK	(1<<25)
+#define HID0_PAR	(1<<24)
+#define HID0_STEN	(1<<24)		/* Software table search enable - 745x */
+#define HID0_HIGH_BAT	(1<<23)		/* Enable high BATs - 7455 */
+#define HID0_DOZE	(1<<23)
+#define HID0_NAP	(1<<22)
+#define HID0_SLEEP	(1<<21)
+#define HID0_DPM	(1<<20)
+#define HID0_BHTCLR	(1<<18)		/* Clear branch history table - 7450 */
+#define HID0_XAEN	(1<<17)		/* Extended addressing enable - 7450 */
+#define HID0_NHR	(1<<16)		/* Not hard reset (software bit-7450)*/
+#define HID0_ICE	(1<<15)		/* Instruction Cache Enable */
+#define HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
+#define HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
+#define HID0_DCI	(1<<10)		/* Data Cache Invalidate */
+#define HID0_SPD	(1<<9)		/* Speculative disable */
+#define HID0_SGE	(1<<7)		/* Store Gathering Enable */
+#define HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
+#define HID0_DFCA	(1<<6)		/* Data Cache Flush Assist */
+#define HID0_LRSTK	(1<<4)		/* Link register stack - 745x */
+#define HID0_BTIC	(1<<5)		/* Branch Target Instr Cache Enable */
+#define HID0_ABE	(1<<3)		/* Address Broadcast Enable */
+#define HID0_FOLD	(1<<3)		/* Branch Folding enable - 745x */
+#define HID0_BHTE	(1<<2)		/* Branch History Table Enable */
+#define HID0_BTCD	(1<<1)		/* Branch target cache disable */
+#define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
+#define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
+#define HID1_DFS	(1<<22)		/* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0	(1<<16)		/* 7450 PLL_CFG[0] */
+#define HID1_PC1	(1<<15)		/* 7450 PLL_CFG[1] */
+#define HID1_PC2	(1<<14)		/* 7450 PLL_CFG[2] */
+#define HID1_PC3	(1<<13)		/* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE	(1<<11)		/* 7450 ABE for sync, eieio */
+#define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
+#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID5	0x3F6		/* 970 HID5 */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L	0x211		/* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U	0x210		/* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L	0x213		/* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U	0x212		/* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L	0x215		/* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U	0x214		/* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L	0x217		/* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U	0x216		/* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L	0x231		/* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U	0x230		/* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L	0x233		/* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U	0x232		/* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L	0x235		/* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U	0x234		/* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L	0x237		/* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
+#define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE	0x08000000	/* enable icache parity errs */
+#define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
+#define ICTRL_EICP	0x00000100	/* enable icache par. check */
+#define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
+#define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
+#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2	0x3f8
+#define L2CR_L2E		0x80000000	/* L2 enable */
+#define L2CR_L2PE		0x40000000	/* L2 parity enable */
+#define L2CR_L2SIZ_MASK		0x30000000	/* L2 size mask */
+#define L2CR_L2SIZ_256KB	0x10000000	/* L2 size 256KB */
+#define L2CR_L2SIZ_512KB	0x20000000	/* L2 size 512KB */
+#define L2CR_L2SIZ_1MB		0x30000000	/* L2 size 1MB */
+#define L2CR_L2CLK_MASK		0x0e000000	/* L2 clock mask */
+#define L2CR_L2CLK_DISABLED	0x00000000	/* L2 clock disabled */
+#define L2CR_L2CLK_DIV1		0x02000000	/* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5	0x04000000	/* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2		0x08000000	/* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5	0x0a000000	/* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3		0x0c000000	/* L2 clock / 3 */
+#define L2CR_L2RAM_MASK		0x01800000	/* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW		0x00000000	/* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE		0x01000000	/* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW	0x01800000	/* L2 RAM pipelined latewr */
+#define L2CR_L2DO		0x00400000	/* L2 data only */
+#define L2CR_L2I		0x00200000	/* L2 global invalidate */
+#define L2CR_L2CTL		0x00100000	/* L2 RAM control */
+#define L2CR_L2WT		0x00080000	/* L2 write-through */
+#define L2CR_L2TS		0x00040000	/* L2 test support */
+#define L2CR_L2OH_MASK		0x00030000	/* L2 output hold mask */
+#define L2CR_L2OH_0_5		0x00000000	/* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0		0x00010000	/* L2 output hold 1.0 ns */
+#define L2CR_L2SL		0x00008000	/* L2 DLL slow */
+#define L2CR_L2DF		0x00004000	/* L2 differential clock */
+#define L2CR_L2BYP		0x00002000	/* L2 DLL bypass */
+#define L2CR_L2IP		0x00000001	/* L2 GI in progress */
+#define L2CR_L2IO_745x		0x00100000	/* L2 instr. only (745x) */
+#define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
+#define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
+#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
+#define L3CR_L3E		0x80000000	/* L3 enable */
+#define L3CR_L3PE		0x40000000	/* L3 data parity enable */
+#define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
+#define L3CR_L3SIZ		0x10000000	/* L3 size */
+#define L3CR_L3CLKEN		0x08000000	/* L3 clock enable */
+#define L3CR_L3RES		0x04000000	/* L3 special reserved bit */
+#define L3CR_L3CLKDIV		0x03800000	/* L3 clock divisor */
+#define L3CR_L3IO		0x00400000	/* L3 instruction only */
+#define L3CR_L3SPO		0x00040000	/* L3 sample point override */
+#define L3CR_L3CKSP		0x00030000	/* L3 clock sample point */
+#define L3CR_L3PSP		0x0000e000	/* L3 P-clock sample point */
+#define L3CR_L3REP		0x00001000	/* L3 replacement algorithm */
+#define L3CR_L3HWF		0x00000800	/* L3 hardware flush */
+#define L3CR_L3I		0x00000400	/* L3 global invalidate */
+#define L3CR_L3RT		0x00000300	/* L3 SRAM type */
+#define L3CR_L3NIRCA		0x00000080	/* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO		0x00000040	/* L3 data only mode */
+#define L3CR_PMEN		0x00000004	/* L3 private memory enable */
+#define L3CR_PMSIZ		0x00000001	/* L3 private memory size */
+#define SPRN_MSSCR0	0x3f6	/* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0	0x3f7	/* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR	0x3f8	/* Load/Store control register */
+#define SPRN_LDSTDB	0x3f4	/* */
+#define SPRN_LR		0x008	/* Link Register */
+#define SPRN_MMCR0	0x3B8	/* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1	0x3BC	/* Monitor Mode Control Register 1 */
+#ifndef SPRN_PIR
+#define SPRN_PIR	0x3FF	/* Processor Identification Register */
+#endif
+#define SPRN_PMC1	0x3B9	/* Performance Counter Register 1 */
+#define SPRN_PMC2	0x3BA	/* Performance Counter Register 2 */
+#define SPRN_PMC3	0x3BD	/* Performance Counter Register 3 */
+#define SPRN_PMC4	0x3BE	/* Performance Counter Register 4 */
+#define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PVR	0x11F	/* Processor Version Register */
+#define SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
+#define SPRN_SDR1	0x019	/* MMU Hash Base Register */
+#define SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
+#define SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
+#define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
+#define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
+#define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
+#define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
+#define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
+#ifndef SPRN_SVR
+#define SPRN_SVR	0x11E	/* System Version Register */
+#endif
+#define SPRN_THRM1	0x3FC		/* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN	(1 << 31)
+#define THRM1_TIV	(1 << 30)
+#define THRM1_THRES(x)	((x&0x7f)<<23)
+#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM1_TID	(1<<2)
+#define THRM1_TIE	(1<<1)
+#define THRM1_V		(1<<0)
+#define SPRN_THRM2	0x3FD		/* Thermal Management Register 2 */
+#define SPRN_THRM3	0x3FE		/* Thermal Management Register 3 */
+#define THRM3_E		(1<<0)
+#define SPRN_TLBMISS	0x3D4		/* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
+#define SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
+#define SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
+#define SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
+#define SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
+#define SPRN_XER	0x001	/* Fixed Point Exception Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES	(1 << 7)
+#define MMCR0_PMC1_ICACHEMISS	(5 << 7)
+#define MMCR0_PMC1_DTLB		(6 << 7)
+#define MMCR0_PMC2_DCACHEMISS	0x6
+#define MMCR0_PMC2_CYCLES	0x1
+#define MMCR0_PMC2_ITLB		0x7
+#define MMCR0_PMC2_LOADMISSTIME	0x5
+#define MMCR0_PMXE	(1 << 26)
+
+/* Processor Version Register */
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
+#define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr)	(((pvr) >> 20) & 0xFFF)	/* Family field */
+#define PVR_MEM(pvr)	(((pvr) >> 16) & 0xF)	/* Member field */
+#define PVR_CORE(pvr)	(((pvr) >> 12) & 0xF)	/* Core field */
+#define PVR_CFG(pvr)	(((pvr) >>  8) & 0xF)	/* Configuration field */
+#define PVR_MAJ(pvr)	(((pvr) >>  4) & 0xF)	/* Major revision field */
+#define PVR_MIN(pvr)	(((pvr) >>  0) & 0xF)	/* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA	0x00200000
+#define PVR_403GB	0x00200100
+#define PVR_403GC	0x00200200
+#define PVR_403GCX	0x00201400
+#define PVR_405GP	0x40110000
+#define PVR_STB03XXX	0x40310000
+#define PVR_NP405H	0x41410000
+#define PVR_NP405L	0x41610000
+#define PVR_440GP_RB	0x40120440
+#define PVR_440GP_RC1	0x40120481
+#define PVR_440GP_RC2	0x40200481
+#define PVR_440GX_RA	0x51b21850
+#define PVR_440GX_RB	0x51b21851
+#define PVR_440GX_RC	0x51b21892
+#define PVR_601		0x00010000
+#define PVR_602		0x00050000
+#define PVR_603		0x00030000
+#define PVR_603e	0x00060000
+#define PVR_603ev	0x00070000
+#define PVR_603r	0x00071000
+#define PVR_604		0x00040000
+#define PVR_604e	0x00090000
+#define PVR_604r	0x000A0000
+#define PVR_620		0x00140000
+#define PVR_740		0x00080000
+#define PVR_750		PVR_740
+#define PVR_740P	0x10080000
+#define PVR_750P	PVR_740P
+#define PVR_7400	0x000C0000
+#define PVR_7410	0x800C0000
+#define PVR_7450	0x80000000
+#define PVR_8540	0x80200000
+#define PVR_8560	0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821		0x00500000
+#define PVR_823		PVR_821
+#define PVR_850		PVR_821
+#define PVR_860		PVR_821
+#define PVR_8240	0x00810100
+#define PVR_8245	0x80811014
+#define PVR_8260	PVR_8240
+
+#if 0
+/* Segment Registers */
+#define SR0	0
+#define SR1	1
+#define SR2	2
+#define SR3	3
+#define SR4	4
+#define SR5	5
+#define SR6	6
+#define SR7	7
+#define SR8	8
+#define SR9	9
+#define SR10	10
+#define SR11	11
+#define SR12	12
+#define SR13	13
+#define SR14	14
+#define SR15	15
+#endif
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr()		({unsigned int rval; \
+			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+
+#define mfspr(rn)	({unsigned int rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				: "=r" (rval)); rval;})
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#define mfsrin(v)	({unsigned int rval; \
+			asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+					rval;})
+
+#define proc_trap()	asm volatile("trap")
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPC_REGS_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
new file mode 100644
index 000000000000..4b03f8e26b72
--- /dev/null
+++ b/include/asm-ppc/reg_booke.h
@@ -0,0 +1,484 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification.  Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well.  Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REG_BOOKE_H__
+#define __ASM_PPC_REG_BOOKE_H__
+
+#ifndef __ASSEMBLY__
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
+	({unsigned int rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
+	else							\
+		rval = __mfdcr(rn);				\
+	rval;})
+
+#define mtdcr(rn, v)						\
+do {								\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+#define mfdcri(base, reg)			\
+({						\
+	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
+	mfdcr(base ## _CFGDATA);			\
+})
+
+#define mtdcri(base, reg, data)			\
+do {						\
+	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
+	mtdcr(base ## _CFGDATA, data);		\
+} while (0)
+
+/* Performance Monitor Registers */
+#define mfpmr(rn)	({unsigned int rval; \
+			asm volatile("mfpmr %0," __stringify(rn) \
+				     : "=r" (rval)); rval;})
+#define mtpmr(rn, v)	asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
+#define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
+#define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
+#define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
+#define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+
+#define PMLCA_FC	0x80000000	/* Freeze Counter */
+#define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
+#define PMLCA_FCU	0x20000000	/* Freeze in User */
+#define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
+#define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
+#define PMLCA_CE	0x04000000	/* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_SHIFT	16
+
+#define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
+#define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
+#define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
+#define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT	8
+
+#define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT	0
+
+#define PMRN_PMGC0	0x190	/* PM Global Control 0 */
+
+#define PMGC0_FAC	0x80000000	/* Freeze all Counters */
+#define PMGC0_PMIE	0x40000000	/* Interrupt Enable */
+#define PMGC0_FCECE	0x20000000	/* Freeze countes on
+					   Enabled Condition or
+					   Event */
+
+#define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
+#define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
+#define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
+#define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
+#define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
+#define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
+#define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
+
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
+#define MSR_SPE		(1<<25)	/* Enable SPE */
+#define MSR_DWE		(1<<10)	/* Debug Wait Enable */
+#define MSR_UBLE	(1<<10)	/* BTB lock enable (e500) */
+#define MSR_IS		MSR_IR	/* Instruction Space */
+#define MSR_DS		MSR_DR	/* Data Space */
+#define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
+#define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R	0x107	/* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W	0x114	/* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
+#define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
+#define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
+#define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
+#define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3	0x193	/* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4	0x194	/* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5	0x195	/* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6	0x196	/* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7	0x197	/* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8	0x198	/* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9	0x199	/* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10	0x19A	/* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11	0x19B	/* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12	0x19C	/* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
+#define SPRN_IVOR32	0x210	/* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33	0x211	/* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34	0x212	/* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
+#define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR	0x23C	/* Machine Check Status Register */
+#define SPRN_MCAR	0x23D	/* Machine Check Address Register */
+#define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
+#define SPRN_MAS1	0x271	/* MMU Assist Register 1 */
+#define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
+#define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
+#define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
+#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
+#define SPRN_PID1	0x279	/* Process ID Register 1 */
+#define SPRN_PID2	0x27A	/* Process ID Register 2 */
+#define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
+#define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
+#define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
+#define SPRN_MMUCR	0x3B2	/* MMU Control Register */
+#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
+#define SPRN_SGR	0x3B9	/* Storage Guarded Register */
+#define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
+#define SPRN_SLER	0x3BB	/* Little-endian real mode */
+#define SPRN_SU0R	0x3BC	/* "User 0" real mode (40x) */
+#define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
+#define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
+#define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
+#define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
+#define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define SPRN_SVR	0x3FF	/* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID	0x030	/* Process ID */
+#define SPRN_PID0	SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0	0x03A	/* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	0x03B	/* Critical Save and Restore Register 1 */
+#define SPRN_DEAR	0x03D	/* Data Error Address Register */
+#define SPRN_ESR	0x03E	/* Exception Syndrome Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
+#define SPRN_DBSR	0x130	/* Debug Status Register */
+#define SPRN_DBCR0	0x134	/* Debug Control Register 0 */
+#define SPRN_DBCR1	0x135	/* Debug Control Register 1 */
+#define SPRN_IAC1	0x138	/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x139	/* Instruction Address Compare 2 */
+#define SPRN_DAC1	0x13C	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x13D	/* Data Address Compare 2 */
+#define SPRN_TSR	0x150	/* Timer Status Register */
+#define SPRN_TCR	0x154	/* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID	0x3B1	/* Process ID */
+#define SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */		
+#define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
+#define SPRN_DEAR	0x3D5	/* Data Error Address Register */
+#define SPRN_TSR	0x3D8	/* Timer Status Register */
+#define SPRN_TCR	0x3DA	/* Timer Control Register */
+#define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
+#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
+#define SPRN_DBSR	0x3F0	/* Debug Status Register */		
+#define SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
+#define SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define	CCR1_TCS	0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#ifdef CONFIG_440A
+#define MCSR_MCS	0x80000000 /* Machine Check Summary */
+#define MCSR_IB		0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB	0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB	0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP	0x08000000 /* TLB Parity Error */
+#define MCSR_ICP	0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP	0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
+#endif
+#ifdef CONFIG_E500
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
+#define MCSR_GL_CI 	0x00010000UL /* Guarded Load or Cache-Inhibited stwcx. */
+#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC		0x08000000	/* Instruction Completion */
+#define DBSR_BT		0x04000000	/* Branch Taken */
+#define DBSR_TIE	0x01000000	/* Trap Instruction Event */
+#define DBSR_IAC1	0x00800000	/* Instr Address Compare 1 Event */
+#define DBSR_IAC2	0x00400000	/* Instr Address Compare 2 Event */
+#define DBSR_IAC3	0x00200000	/* Instr Address Compare 3 Event */
+#define DBSR_IAC4	0x00100000	/* Instr Address Compare 4 Event */
+#define DBSR_DAC1R	0x00080000	/* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W	0x00040000	/* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R	0x00020000	/* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W	0x00010000	/* Data Addr Compare 2 Write Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC		0x80000000	/* Instruction Completion */
+#define DBSR_BT		0x40000000	/* Branch taken */
+#define DBSR_TIE	0x10000000	/* Trap Instruction debug Event */
+#define DBSR_IAC1	0x00800000	/* Instruction Address Compare 1 Event */
+#define DBSR_IAC2	0x00400000	/* Instruction Address Compare 2 Event */
+#define DBSR_IAC3	0x00200000	/* Instruction Address Compare 3 Event */
+#define DBSR_IAC4	0x00100000	/* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R	0x00080000	/* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W	0x00040000	/* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R	0x00020000	/* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W	0x00010000	/* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI		0x80000000	/* Machine Check - Instruction */
+#define ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
+#define ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
+#define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
+#define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define ESR_PIL		0x08000000	/* Program Exception - Illegal */
+#define ESR_PPR		0x04000000	/* Program Exception - Priveleged */
+#define ESR_PTR		0x02000000	/* Program Exception - Trap */
+#define ESR_DST		0x00800000	/* Storage Exception - Data miss */
+#define ESR_DIZ		0x00400000	/* Storage Exception - Zone fault */
+#define ESR_ST		0x00800000	/* Store Operation */
+#define ESR_DLK		0x00200000	/* Data Cache Locking */
+#define ESR_ILK		0x00100000	/* Instr. Cache Locking */
+#define ESR_BO		0x00020000	/* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_IC	0x08000000	/* Instruction Completion */
+#define DBCR0_BT	0x04000000	/* Branch Taken */
+#define DBCR0_EDE	0x02000000	/* Exception Debug Event */
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_IA1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IA2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IA12	0x00200000	/* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X	0x00100000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3	0x00080000	/* Instr Addr compare 3 enable */
+#define DBCR0_IA4	0x00040000	/* Instr Addr compare 4 enable */
+#define DBCR0_IA34	0x00020000	/* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X	0x00010000	/* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
+#define TCR_WP_MASK	TCR_WP(3)
+#define WP_2_17		0		/* 2^17 clocks */
+#define WP_2_21		1		/* 2^21 clocks */
+#define WP_2_25		2		/* 2^25 clocks */
+#define WP_2_29		3		/* 2^29 clocks */
+#define TCR_WRC(x)	(((x)&0x3)<<28)	/* WDT Reset Control */
+#define TCR_WRC_MASK	TCR_WRC(3)
+#define WRC_NONE	0		/* No reset will occur */
+#define WRC_CORE	1		/* Core reset will occur */
+#define WRC_CHIP	2		/* Chip reset will occur */
+#define WRC_SYSTEM	3		/* System reset will occur */
+#define TCR_WIE		0x08000000	/* WDT Interrupt Enable */
+#define TCR_PIE		0x04000000	/* PIT Interrupt Enable */
+#define TCR_DIE		TCR_PIE		/* DEC Interrupt Enable */
+#define TCR_FP(x)	(((x)&0x3)<<24)	/* FIT Period */
+#define TCR_FP_MASK	TCR_FP(3)
+#define FP_2_9		0		/* 2^9 clocks */
+#define FP_2_13		1		/* 2^13 clocks */
+#define FP_2_17		2		/* 2^17 clocks */
+#define FP_2_21		3		/* 2^21 clocks */
+#define TCR_FIE		0x00800000	/* FIT Interrupt Enable */
+#define TCR_ARE		0x00400000	/* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW		0x80000000	/* Enable Next Watchdog */
+#define TSR_WIS		0x40000000	/* WDT Interrupt Status */
+#define TSR_WRS(x)	(((x)&0x3)<<28)	/* WDT Reset Status */
+#define WRS_NONE	0		/* No WDT reset occurred */
+#define WRS_CORE	1		/* WDT forced core reset */
+#define WRS_CHIP	2		/* WDT forced chip reset */
+#define WRS_SYSTEM	3		/* WDT forced system reset */
+#define TSR_PIS		0x08000000	/* PIT Interrupt Status */
+#define TSR_DIS		TSR_PIS		/* DEC Interrupt Status */
+#define TSR_FIS		0x04000000	/* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE	0		/* Noncacheable */
+#define DCCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY	0		/* Copy-back */
+#define DCWR_WRITE	1		/* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE	0		/* Noncacheable */
+#define ICCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
+#define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL	0		/* Speculative fetching allowed. */
+#define SGR_GUARDED	1		/* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series.  We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
+#define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
+#define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
+#define SPRN_TBHI	0x3DC	/* Time Base High */
+#define SPRN_TBLO	0x3DD	/* Time Base Low */
+#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
+#define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
+#define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
+#define SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM	DBCR0_EDM
+#define DBCR_IDM	DBCR0_IDM
+#define DBCR_RST(x)	(((x) & 0x3) << 28)
+#define DBCR_RST_NONE	0
+#define DBCR_RST_CORE	1
+#define DBCR_RST_CHIP	2
+#define DBCR_RST_SYSTEM	3
+#define DBCR_IC		DBCR0_IC	/* Instruction Completion Debug Evnt */
+#define DBCR_BT		DBCR0_BT	/* Branch Taken Debug Event */
+#define DBCR_EDE	DBCR0_EDE	/* Exception Debug Event */
+#define DBCR_TDE	DBCR0_TDE	/* TRAP Debug Event */
+#define DBCR_FER	0x00F80000	/* First Events Remaining Mask */
+#define DBCR_FT		0x00040000	/* Freeze Timers on Debug Event */
+#define DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
+#define DAC_BYTE	0
+#define DAC_HALF	1
+#define DAC_WORD	2
+#define DAC_QUAD	3
+#define DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
+#define DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
+#define DBCR_SED	0x00000020	/* Second Exception Debug Event */
+#define DBCR_STD	0x00000010	/* Second Trap Debug Event */
+#define DBCR_SIA	0x00000008	/* Second IAC Enable */
+#define DBCR_SDA	0x00000004	/* Second DAC Enable */
+#define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_PPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/residual.h b/include/asm-ppc/residual.h
new file mode 100644
index 000000000000..934810d25667
--- /dev/null
+++ b/include/asm-ppc/residual.h
@@ -0,0 +1,350 @@
+/* 7/18/95                                                                    */
+/*----------------------------------------------------------------------------*/
+/*      Residual Data header definitions and prototypes                       */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for RESIDUAL on PowerPC Reference Platform                   */
+/* residual.h - Residual data structure passed in r3.                         */
+/*              Load point passed in r4 to boot image.                        */
+/* For enum's: if given in hex then they are bit significant,                 */
+/*             i.e. only one bit is on for each enum                          */
+/* Reserved fields must be filled with zeros.                                */
+
+#ifdef __KERNEL__
+#ifndef _RESIDUAL_
+#define _RESIDUAL_
+
+#ifndef __ASSEMBLY__
+
+#define MAX_CPUS 32                     /* These should be set to the maximum */
+#define MAX_MEMS 64                     /* number possible for this system.   */
+#define MAX_DEVICES 256                 /* Changing these will change the     */
+#define AVE_PNP_SIZE 32                 /* structure, hence the version of    */
+#define MAX_MEM_SEGS 64                 /* this header file.                  */
+
+/*----------------------------------------------------------------------------*/
+/*               Public structures...                                         */
+/*----------------------------------------------------------------------------*/
+
+#include <asm/pnp.h>
+
+typedef enum _L1CACHE_TYPE {
+  NoneCAC = 0,
+  SplitCAC = 1,
+  CombinedCAC = 2
+  } L1CACHE_TYPE;
+
+typedef enum _TLB_TYPE {
+  NoneTLB = 0,
+  SplitTLB = 1,
+  CombinedTLB = 2
+  } TLB_TYPE;
+
+typedef enum _FIRMWARE_SUPPORT {
+  Conventional = 0x01,
+  OpenFirmware = 0x02,
+  Diagnostics = 0x04,
+  LowDebug = 0x08,
+  Multiboot = 0x10,
+  LowClient = 0x20,
+  Hex41 = 0x40,
+  FAT = 0x80,
+  ISO9660 = 0x0100,
+  SCSI_InitiatorID_Override = 0x0200,
+  Tape_Boot = 0x0400,
+  FW_Boot_Path = 0x0800
+  } FIRMWARE_SUPPORT;
+
+typedef enum _FIRMWARE_SUPPLIERS {
+  IBMFirmware = 0x00,
+  MotoFirmware = 0x01,                  /* 7/18/95                            */
+  FirmWorks = 0x02,                     /* 10/5/95                            */
+  Bull = 0x03,                          /* 04/03/96                           */
+  } FIRMWARE_SUPPLIERS;
+
+typedef enum _ENDIAN_SWITCH_METHODS {
+  UsePort92 = 0x01,
+  UsePCIConfigA8 = 0x02,
+  UseFF001030 = 0x03,
+  } ENDIAN_SWITCH_METHODS;
+
+typedef enum _SPREAD_IO_METHODS {
+  UsePort850 = 0x00,
+/*UsePCIConfigA8 = 0x02,*/
+  } SPREAD_IO_METHODS;
+
+typedef struct _VPD {
+
+  /* Box dependent stuff */
+  unsigned char PrintableModel[32];     /* Null terminated string.
+                                           Must be of the form:
+                                           vvv,<20h>,<model designation>,<0x0>
+                                           where vvv is the vendor ID
+                                           e.g. IBM PPS MODEL 6015<0x0>       */
+  unsigned char Serial[16];             /* 12/94:
+                                           Serial Number; must be of the form:
+                                           vvv<serial number> where vvv is the
+                                           vendor ID.
+                                           e.g. IBM60151234567<20h><20h>      */
+  unsigned char Reserved[48];
+  unsigned long FirmwareSupplier;       /* See FirmwareSuppliers enum         */
+  unsigned long FirmwareSupports;       /* See FirmwareSupport enum           */
+  unsigned long NvramSize;              /* Size of nvram in bytes             */
+  unsigned long NumSIMMSlots;
+  unsigned short EndianSwitchMethod;    /* See EndianSwitchMethods enum       */
+  unsigned short SpreadIOMethod;        /* See SpreadIOMethods enum           */
+  unsigned long SmpIar;
+  unsigned long RAMErrLogOffset;        /* Heap offset to error log           */
+  unsigned long Reserved5;
+  unsigned long Reserved6;
+  unsigned long ProcessorHz;            /* Processor clock frequency in Hertz */
+  unsigned long ProcessorBusHz;         /* Processor bus clock frequency      */
+  unsigned long Reserved7;
+  unsigned long TimeBaseDivisor;        /* (Bus clocks per timebase tic)*1000 */
+  unsigned long WordWidth;              /* Word width in bits                 */
+  unsigned long PageSize;               /* Page size in bytes                 */
+  unsigned long CoherenceBlockSize;     /* Unit of transfer in/out of cache
+                                           for which coherency is maintained;
+                                           normally <= CacheLineSize.         */
+  unsigned long GranuleSize;            /* Unit of lock allocation to avoid   */
+                                        /*   false sharing of locks.          */
+
+  /* L1 Cache variables */
+  unsigned long CacheSize;              /* L1 Cache size in KB. This is the   */
+                                        /*   total size of the L1, whether    */
+                                        /*   combined or split                */
+  unsigned long CacheAttrib;            /* L1CACHE_TYPE                       */
+  unsigned long CacheAssoc;             /* L1 Cache associativity. Use this
+                                           for combined cache. If split, put
+                                           zeros here.                        */
+  unsigned long CacheLineSize;          /* L1 Cache line size in bytes. Use
+                                           for combined cache. If split, put
+                                           zeros here.                        */
+  /* For split L1 Cache: (= combined if combined cache) */
+  unsigned long I_CacheSize;
+  unsigned long I_CacheAssoc;
+  unsigned long I_CacheLineSize;
+  unsigned long D_CacheSize;
+  unsigned long D_CacheAssoc;
+  unsigned long D_CacheLineSize;
+
+  /* Translation Lookaside Buffer variables */
+  unsigned long TLBSize;                /* Total number of TLBs on the system */
+  unsigned long TLBAttrib;              /* Combined I+D or split TLB          */
+  unsigned long TLBAssoc;               /* TLB Associativity. Use this for
+                                           combined TLB. If split, put zeros
+                                           here.                              */
+  /* For split TLB: (= combined if combined TLB) */
+  unsigned long I_TLBSize;
+  unsigned long I_TLBAssoc;
+  unsigned long D_TLBSize;
+  unsigned long D_TLBAssoc;
+
+  unsigned long ExtendedVPD;            /* Offset to extended VPD area;
+                                           null if unused                     */
+  } VPD;
+
+typedef enum _DEVICE_FLAGS {
+  Enabled = 0x4000,                     /* 1 - PCI device is enabled          */
+  Integrated = 0x2000,
+  Failed = 0x1000,                      /* 1 - device failed POST code tests  */
+  Static = 0x0800,                      /* 0 - dynamically configurable
+                                           1 - static                         */
+  Dock = 0x0400,                        /* 0 - not a docking station device
+                                           1 - is a docking station device    */
+  Boot = 0x0200,                        /* 0 - device cannot be used for BOOT
+                                           1 - can be a BOOT device           */
+  Configurable = 0x0100,                /* 1 - device is configurable         */
+  Disableable = 0x80,                   /* 1 - device can be disabled         */
+  PowerManaged = 0x40,                  /* 0 - not managed; 1 - managed       */
+  ReadOnly = 0x20,                      /* 1 - device is read only            */
+  Removable = 0x10,                     /* 1 - device is removable            */
+  ConsoleIn = 0x08,
+  ConsoleOut = 0x04,
+  Input = 0x02,
+  Output = 0x01
+  } DEVICE_FLAGS;
+
+typedef enum _BUS_ID {
+  ISADEVICE = 0x01,
+  EISADEVICE = 0x02,
+  PCIDEVICE = 0x04,
+  PCMCIADEVICE = 0x08,
+  PNPISADEVICE = 0x10,
+  MCADEVICE = 0x20,
+  MXDEVICE = 0x40,                      /* Devices on mezzanine bus           */
+  PROCESSORDEVICE = 0x80,               /* Devices on processor bus           */
+  VMEDEVICE = 0x100,
+  } BUS_ID;
+
+typedef struct _DEVICE_ID {
+  unsigned long BusId;                  /* See BUS_ID enum above              */
+  unsigned long DevId;                  /* Big Endian format                  */
+  unsigned long SerialNum;              /* For multiple usage of a single
+                                           DevId                              */
+  unsigned long Flags;                  /* See DEVICE_FLAGS enum above        */
+  unsigned char BaseType;               /* See pnp.h for bit definitions      */
+  unsigned char SubType;                /* See pnp.h for bit definitions      */
+  unsigned char Interface;              /* See pnp.h for bit definitions      */
+  unsigned char Spare;
+  } DEVICE_ID;
+
+typedef union _BUS_ACCESS {
+  struct _PnPAccess{
+    unsigned char CSN;
+    unsigned char LogicalDevNumber;
+    unsigned short ReadDataPort;
+    } PnPAccess;
+  struct _ISAAccess{
+    unsigned char SlotNumber;           /* ISA Slot Number generally not
+                                           available; 0 if unknown            */
+    unsigned char LogicalDevNumber;
+    unsigned short ISAReserved;
+    } ISAAccess;
+  struct _MCAAccess{
+    unsigned char SlotNumber;
+    unsigned char LogicalDevNumber;
+    unsigned short MCAReserved;
+    } MCAAccess;
+  struct _PCMCIAAccess{
+    unsigned char SlotNumber;
+    unsigned char LogicalDevNumber;
+    unsigned short PCMCIAReserved;
+    } PCMCIAAccess;
+  struct _EISAAccess{
+    unsigned char SlotNumber;
+    unsigned char FunctionNumber;
+    unsigned short EISAReserved;
+    } EISAAccess;
+  struct _PCIAccess{
+    unsigned char BusNumber;
+    unsigned char DevFuncNumber;
+    unsigned short PCIReserved;
+    } PCIAccess;
+  struct _ProcBusAccess{
+    unsigned char BusNumber;
+    unsigned char BUID;
+    unsigned short ProcBusReserved;
+    } ProcBusAccess;
+  } BUS_ACCESS;
+
+/* Per logical device information */
+typedef struct _PPC_DEVICE {
+  DEVICE_ID DeviceId;
+  BUS_ACCESS BusAccess;
+
+  /* The following three are offsets into the DevicePnPHeap */
+  /* All are in PnP compressed format                       */
+  unsigned long AllocatedOffset;        /* Allocated resource description     */
+  unsigned long PossibleOffset;         /* Possible resource description      */
+  unsigned long CompatibleOffset;       /* Compatible device identifiers      */
+  } PPC_DEVICE;
+
+typedef enum _CPU_STATE {
+  CPU_GOOD = 0,                         /* CPU is present, and active         */
+  CPU_GOOD_FW = 1,                      /* CPU is present, and in firmware    */
+  CPU_OFF = 2,                          /* CPU is present, but inactive       */
+  CPU_FAILED = 3,                       /* CPU is present, but failed POST    */
+  CPU_NOT_PRESENT = 255                 /* CPU not present                    */
+  } CPU_STATE;
+
+typedef struct _PPC_CPU {
+  unsigned long CpuType;                /* Result of mfspr from Processor
+                                           Version Register (PVR).
+                                           PVR(0-15) = Version (e.g. 601)
+                                           PVR(16-31 = EC Level               */
+  unsigned char CpuNumber;              /* CPU Number for this processor      */
+  unsigned char CpuState;               /* CPU State, see CPU_STATE enum      */
+  unsigned short Reserved;
+  } PPC_CPU;
+
+typedef struct _PPC_MEM {
+  unsigned long SIMMSize;               /* 0 - absent or bad
+                                           8M, 32M (in MB)                    */
+  } PPC_MEM;
+
+typedef enum _MEM_USAGE {
+  Other = 0x8000,
+  ResumeBlock = 0x4000,                 /* for use by power management        */
+  SystemROM = 0x2000,                   /* Flash memory (populated)           */
+  UnPopSystemROM = 0x1000,              /* Unpopulated part of SystemROM area */
+  IOMemory = 0x0800,
+  SystemIO = 0x0400,
+  SystemRegs = 0x0200,
+  PCIAddr = 0x0100,
+  PCIConfig = 0x80,
+  ISAAddr = 0x40,
+  Unpopulated = 0x20,                   /* Unpopulated part of System Memory  */
+  Free = 0x10,                          /* Free part of System Memory         */
+  BootImage = 0x08,                     /* BootImage part of System Memory    */
+  FirmwareCode = 0x04,                  /* FirmwareCode part of System Memory */
+  FirmwareHeap = 0x02,                  /* FirmwareHeap part of System Memory */
+  FirmwareStack = 0x01                  /* FirmwareStack part of System Memory*/
+  } MEM_USAGE;
+
+typedef struct _MEM_MAP {
+  unsigned long Usage;                  /* See MEM_USAGE above                */
+  unsigned long BasePage;               /* Page number measured in 4KB pages  */
+  unsigned long PageCount;              /* Page count measured in 4KB pages   */
+  } MEM_MAP;
+
+typedef struct _RESIDUAL {
+  unsigned long ResidualLength;         /* Length of Residual                 */
+  unsigned char Version;                /* of this data structure             */
+  unsigned char Revision;               /* of this data structure             */
+  unsigned short EC;                    /* of this data structure             */
+  /* VPD */
+  VPD VitalProductData;
+  /* CPU */
+  unsigned short MaxNumCpus;            /* Max CPUs in this system            */
+  unsigned short ActualNumCpus;         /* ActualNumCpus < MaxNumCpus means   */
+                                        /* that there are unpopulated or      */
+                                        /* otherwise unusable cpu locations   */
+  PPC_CPU Cpus[MAX_CPUS];
+  /* Memory */
+  unsigned long TotalMemory;            /* Total amount of memory installed   */
+  unsigned long GoodMemory;             /* Total amount of good memory        */
+  unsigned long ActualNumMemSegs;
+  MEM_MAP Segs[MAX_MEM_SEGS];
+  unsigned long ActualNumMemories;
+  PPC_MEM Memories[MAX_MEMS];
+  /* Devices */
+  unsigned long ActualNumDevices;
+  PPC_DEVICE Devices[MAX_DEVICES];
+  unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
+  } RESIDUAL;
+
+
+/*
+ * Forward declaration - we can't include <linux/pci.h> because it
+ * breaks the boot loader
+ */
+struct pci_dev;
+
+extern RESIDUAL *res;
+extern void print_residual_device_info(void);
+extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
+					unsigned char * DevID, int BaseType,
+					int SubType, int Interface, int n);
+extern int residual_pcidev_irq(struct pci_dev *dev);
+extern void residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
+extern unsigned int residual_isapic_addr(void);
+extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
+				       int n);
+extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
+						    unsigned packet_type,
+						    int n);
+extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
+						    unsigned packet_type,
+						    int n);
+
+#ifdef CONFIG_PREP_RESIDUAL
+#define have_residual_data	(res && res->ResidualLength)
+#else
+#define have_residual_data	0
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ndef _RESIDUAL_ */
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/resource.h b/include/asm-ppc/resource.h
new file mode 100644
index 000000000000..86a1ea23a6ed
--- /dev/null
+++ b/include/asm-ppc/resource.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_RESOURCE_H
+#define _PPC_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h
new file mode 100644
index 000000000000..e6ca1f67cedc
--- /dev/null
+++ b/include/asm-ppc/rheap.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-ppc/rheap.c
+ *
+ * Header file for the implementation of a remote heap.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_PPC_RHEAP_H__
+#define __ASM_PPC_RHEAP_H__
+
+#include <linux/list.h>
+
+typedef struct _rh_block {
+	struct list_head list;
+	void *start;
+	int size;
+	const char *owner;
+} rh_block_t;
+
+typedef struct _rh_info {
+	unsigned int alignment;
+	int max_blocks;
+	int empty_slots;
+	rh_block_t *block;
+	struct list_head empty_list;
+	struct list_head free_list;
+	struct list_head taken_list;
+	unsigned int flags;
+} rh_info_t;
+
+#define RHIF_STATIC_INFO	0x1
+#define RHIF_STATIC_BLOCK	0x2
+
+typedef struct rh_stats_t {
+	void *start;
+	int size;
+	const char *owner;
+} rh_stats_t;
+
+#define RHGS_FREE	0
+#define RHGS_TAKEN	1
+
+/* Create a remote heap dynamically */
+extern rh_info_t *rh_create(unsigned int alignment);
+
+/* Destroy a remote heap, created by rh_create() */
+extern void rh_destroy(rh_info_t * info);
+
+/* Initialize in place a remote info block */
+extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+		    rh_block_t * block);
+
+/* Attach a free region to manage */
+extern int rh_attach_region(rh_info_t * info, void *start, int size);
+
+/* Detach a free region */
+extern void *rh_detach_region(rh_info_t * info, void *start, int size);
+
+/* Allocate the given size from the remote heap */
+extern void *rh_alloc(rh_info_t * info, int size, const char *owner);
+
+/* Allocate the given size from the given address */
+extern void *rh_alloc_fixed(rh_info_t * info, void *start, int size,
+			    const char *owner);
+
+/* Free the allocated area */
+extern int rh_free(rh_info_t * info, void *start);
+
+/* Get stats for debugging purposes */
+extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
+			rh_stats_t * stats);
+
+/* Simple dump of remote heap info */
+extern void rh_dump(rh_info_t * info);
+
+/* Set owner of taken block */
+extern int rh_set_owner(rh_info_t * info, void *start, const char *owner);
+
+#endif				/* __ASM_PPC_RHEAP_H__ */
diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h
new file mode 100644
index 000000000000..05fbf912ab4d
--- /dev/null
+++ b/include/asm-ppc/rtc.h
@@ -0,0 +1,95 @@
+/*
+ * inclue/asm-ppc/rtc.h
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time) {
+		unsigned long nowtime;
+
+		nowtime = (ppc_md.get_rtc_time)();
+
+		to_tm(nowtime, time);
+
+		time->tm_year -= 1900;
+		time->tm_mon -= 1; /* Make sure userland has a 0-based month */
+	}
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time) {
+		unsigned long nowtime;
+
+		nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
+				time->tm_mday, time->tm_hour, time->tm_min,
+				time->tm_sec);
+
+		(ppc_md.set_rtc_time)(nowtime);
+
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-ppc/rwsem.h b/include/asm-ppc/rwsem.h
new file mode 100644
index 000000000000..3e738f483c11
--- /dev/null
+++ b/include/asm-ppc/rwsem.h
@@ -0,0 +1,172 @@
+/*
+ * include/asm-ppc/rwsem.h: R/W semaphores for PPC using the stuff
+ * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#ifndef _PPC_RWSEM_H
+#define _PPC_RWSEM_H
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed long		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
+		smp_wmb();
+	else
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+		smp_wmb();
+	else
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	smp_wmb();
+	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	smp_mb();
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_RWSEM_XADD_H */
diff --git a/include/asm-ppc/scatterlist.h b/include/asm-ppc/scatterlist.h
new file mode 100644
index 000000000000..f21f18f56548
--- /dev/null
+++ b/include/asm-ppc/scatterlist.h
@@ -0,0 +1,25 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SCATTERLIST_H
+#define _PPC_SCATTERLIST_H
+
+#include <asm/dma.h>
+
+struct scatterlist {
+	struct page	*page;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* !(_PPC_SCATTERLIST_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/sections.h b/include/asm-ppc/sections.h
new file mode 100644
index 000000000000..ba8f43ac9bf3
--- /dev/null
+++ b/include/asm-ppc/sections.h
@@ -0,0 +1,33 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SECTIONS_H
+#define _PPC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#define __pmac __attribute__ ((__section__ (".pmac.text")))
+#define __pmacdata __attribute__ ((__section__ (".pmac.data")))
+#define __pmacfunc(__argpmac) \
+	__argpmac __pmac; \
+	__argpmac
+	
+#define __prep __attribute__ ((__section__ (".prep.text")))
+#define __prepdata __attribute__ ((__section__ (".prep.data")))
+#define __prepfunc(__argprep) \
+	__argprep __prep; \
+	__argprep
+
+#define __chrp __attribute__ ((__section__ (".chrp.text")))
+#define __chrpdata __attribute__ ((__section__ (".chrp.data")))
+#define __chrpfunc(__argchrp) \
+	__argchrp __chrp; \
+	__argchrp
+
+/* this is actually just common chrp/pmac code, not OF code -- Cort */
+#define __openfirmware __attribute__ ((__section__ (".openfirmware.text")))
+#define __openfirmwaredata __attribute__ ((__section__ (".openfirmware.data")))
+#define __openfirmwarefunc(__argopenfirmware) \
+	__argopenfirmware __openfirmware; \
+	__argopenfirmware
+	
+#endif /* _PPC_SECTIONS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/segment.h b/include/asm-ppc/segment.h
new file mode 100644
index 000000000000..0f2f7428d437
--- /dev/null
+++ b/include/asm-ppc/segment.h
@@ -0,0 +1 @@
+#include <asm/uaccess.h>
diff --git a/include/asm-ppc/semaphore.h b/include/asm-ppc/semaphore.h
new file mode 100644
index 000000000000..89e6e73be08c
--- /dev/null
+++ b/include/asm-ppc/semaphore.h
@@ -0,0 +1,111 @@
+#ifndef _PPC_SEMAPHORE_H
+#define _PPC_SEMAPHORE_H
+
+/*
+ * Swiped from asm-sparc/semaphore.h and modified
+ * -- Cort (cort@cs.nmt.edu)
+ *
+ * Stole some rw spinlock-based semaphore stuff from asm-alpha/semaphore.h
+ * -- Ani Joshi (ajoshi@unixbox.com)
+ *
+ * Remove spinlock-based RW semaphores; RW semaphore definitions are
+ * now in rwsem.h and we use the generic lib/rwsem.c implementation.
+ * Rework semaphores to use atomic_dec_if_positive.
+ * -- Paul Mackerras (paulus@samba.org)
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	/*
+	 * Note that any negative value of count is equivalent to 0,
+	 * but additionally indicates that some process(es) might be
+	 * sleeping on `wait'.
+	 */
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name, 1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int  __down_interruptible(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+extern inline void down(struct semaphore * sem)
+{
+	might_sleep();
+
+	/*
+	 * Try to get the semaphore, take the slow path if we fail.
+	 */
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+	smp_wmb();
+}
+
+extern inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	smp_wmb();
+	return ret;
+}
+
+extern inline int down_trylock(struct semaphore * sem)
+{
+	int ret;
+
+	ret = atomic_dec_if_positive(&sem->count) < 0;
+	smp_wmb();
+	return ret;
+}
+
+extern inline void up(struct semaphore * sem)
+{
+	smp_wmb();
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_PPC_SEMAPHORE_H) */
diff --git a/include/asm-ppc/sembuf.h b/include/asm-ppc/sembuf.h
new file mode 100644
index 000000000000..883f682f85b8
--- /dev/null
+++ b/include/asm-ppc/sembuf.h
@@ -0,0 +1,19 @@
+#ifndef _PPC_SEMBUF_H
+#define _PPC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for PPC architecture.
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	unsigned int	__unused1;
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned int	__unused2;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _PPC_SEMBUF_H */
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
new file mode 100644
index 000000000000..6d47438be58c
--- /dev/null
+++ b/include/asm-ppc/serial.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-ppc/serial.h
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_SERIAL_H__
+#define __ASM_SERIAL_H__
+
+#include <linux/config.h>
+
+#if defined(CONFIG_EV64260)
+#include <platforms/ev64260.h>
+#elif defined(CONFIG_CHESTNUT)
+#include <platforms/chestnut.h>
+#elif defined(CONFIG_GEMINI)
+#include <platforms/gemini_serial.h>
+#elif defined(CONFIG_POWERPMC250)
+#include <platforms/powerpmc250.h>
+#elif defined(CONFIG_LOPEC)
+#include <platforms/lopec.h>
+#elif defined(CONFIG_MCPN765)
+#include <platforms/mcpn765.h>
+#elif defined(CONFIG_MVME5100)
+#include <platforms/mvme5100.h>
+#elif defined(CONFIG_PAL4)
+#include <platforms/pal4_serial.h>
+#elif defined(CONFIG_PRPMC750)
+#include <platforms/prpmc750.h>
+#elif defined(CONFIG_PRPMC800)
+#include <platforms/prpmc800.h>
+#elif defined(CONFIG_SANDPOINT)
+#include <platforms/sandpoint.h>
+#elif defined(CONFIG_SPRUCE)
+#include <platforms/spruce.h>
+#elif defined(CONFIG_4xx)
+#include <asm/ibm4xx.h>
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_RADSTONE_PPC7D)
+#include <platforms/radstone_ppc7d.h>
+#else
+
+/*
+ * XXX Assume for now it has PC-style ISA serial ports.
+ * This is true for PReP and CHRP at least.
+ */
+#include <asm/pc_serial.h>
+
+#if defined(CONFIG_MAC_SERIAL)
+#define SERIAL_DEV_OFFSET	((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2)
+#endif
+
+#endif /* !CONFIG_GEMINI and others */
+#endif /* __ASM_SERIAL_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/setup.h b/include/asm-ppc/setup.h
new file mode 100644
index 000000000000..d2d19ee103df
--- /dev/null
+++ b/include/asm-ppc/setup.h
@@ -0,0 +1,14 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SETUP_H
+#define _PPC_SETUP_H
+
+#define m68k_num_memory num_memory
+#define m68k_memory memory
+
+#include <asm-m68k/setup.h>
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+#define COMMAND_LINE_SIZE	512
+
+#endif /* _PPC_SETUP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/shmbuf.h b/include/asm-ppc/shmbuf.h
new file mode 100644
index 000000000000..7ac0bd38cbd8
--- /dev/null
+++ b/include/asm-ppc/shmbuf.h
@@ -0,0 +1,37 @@
+#ifndef _PPC_SHMBUF_H
+#define _PPC_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for PPC architecture.
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	unsigned int		__unused1;
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned int		__unused2;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned int		__unused3;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned int		__unused4;
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused5;
+	unsigned long		__unused6;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _PPC_SHMBUF_H */
diff --git a/include/asm-ppc/shmparam.h b/include/asm-ppc/shmparam.h
new file mode 100644
index 000000000000..d6250602ae64
--- /dev/null
+++ b/include/asm-ppc/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_SHMPARAM_H
+#define _PPC_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _PPC_SHMPARAM_H */
diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h
new file mode 100644
index 000000000000..fc5e358c65f1
--- /dev/null
+++ b/include/asm-ppc/sigcontext.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_PPC_SIGCONTEXT_H
+#define _ASM_PPC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+
+struct sigcontext {
+	unsigned long	_unused[4];
+	int		signal;
+	unsigned long	handler;
+	unsigned long	oldmask;
+	struct pt_regs 	*regs;
+};
+
+#endif
diff --git a/include/asm-ppc/siginfo.h b/include/asm-ppc/siginfo.h
new file mode 100644
index 000000000000..4b9435bb9049
--- /dev/null
+++ b/include/asm-ppc/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_SIGINFO_H
+#define _PPC_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-ppc/signal.h b/include/asm-ppc/signal.h
new file mode 100644
index 000000000000..8cc8b88d4edd
--- /dev/null
+++ b/include/asm-ppc/signal.h
@@ -0,0 +1,179 @@
+#ifndef _ASMPPC_SIGNAL_H
+#define _ASMPPC_SIGNAL_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif /* __KERNEL__ */
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+
+#endif
diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h
new file mode 100644
index 000000000000..ebfb614f55f6
--- /dev/null
+++ b/include/asm-ppc/smp.h
@@ -0,0 +1,70 @@
+/* smp.h: PPC specific SMP stuff.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_SMP_H
+#define _PPC_SMP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+struct cpuinfo_PPC {
+	unsigned long loops_per_jiffy;
+	unsigned long pvr;
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+};
+
+extern struct cpuinfo_PPC cpu_data[];
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_possible_map;
+extern unsigned long smp_proc_in_lock[];
+extern volatile unsigned long cpu_callin_map[];
+extern int smp_tb_synchronized;
+
+extern void smp_send_tlb_invalidate(int);
+extern void smp_send_xmon_break(int cpu);
+struct pt_regs;
+extern void smp_message_recv(int, struct pt_regs *);
+
+#define NO_PROC_ID		0xFF            /* No processor magic marker */
+#define PROC_CHANGE_PENALTY	20
+
+#define smp_processor_id() (current_thread_info()->cpu)
+
+extern int __cpu_up(unsigned int cpu);
+
+extern int smp_hw_index[];
+#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
+
+struct klock_info_struct {
+	unsigned long kernel_flag;
+	unsigned char akp;
+};
+
+extern struct klock_info_struct klock_info;
+#define KLOCK_HELD       0xffffffff
+#define KLOCK_CLEAR      0x0
+
+#endif /* __ASSEMBLY__ */
+
+#else /* !(CONFIG_SMP) */
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_PPC_SMP_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/socket.h b/include/asm-ppc/socket.h
new file mode 100644
index 000000000000..4134376b0f66
--- /dev/null
+++ b/include/asm-ppc/socket.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT	16
+#define SO_SNDLOWAT	17
+#define SO_RCVTIMEO	18
+#define SO_SNDTIMEO	19
+#define SO_PASSCRED	20
+#define SO_PEERCRED	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-ppc/sockios.h b/include/asm-ppc/sockios.h
new file mode 100644
index 000000000000..385aedc55ceb
--- /dev/null
+++ b/include/asm-ppc/sockios.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_PPC_SOCKIOS_H
+#define _ASM_PPC_SOCKIOS_H
+
+#if 0 /* These are defined this way on Alpha - maybe later. */
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp - linux-specific */
+#endif
+
+#endif /* _ASM_PPC_SOCKIOS_H */
diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h
new file mode 100644
index 000000000000..909199aae104
--- /dev/null
+++ b/include/asm-ppc/spinlock.h
@@ -0,0 +1,215 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/system.h>
+
+/*
+ * Simple spin lock operations.
+ */
+
+typedef struct {
+	volatile unsigned long lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	volatile unsigned long owner_pc;
+	volatile unsigned long owner_cpu;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#ifdef __KERNEL__
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPINLOCK_DEBUG_INIT     , 0, 0
+#else
+#define SPINLOCK_DEBUG_INIT     /* */
+#endif
+
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0 SPINLOCK_DEBUG_INIT }
+
+#define spin_lock_init(x) 	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+	"b	1f		# spin_lock\n\
+2:	lwzx	%0,0,%1\n\
+	cmpwi	0,%0,0\n\
+	bne+	2b\n\
+1:	lwarx	%0,0,%1\n\
+	cmpwi	0,%0,0\n\
+	bne-	2b\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%2,0,%1\n\
+	bne-	2b\n\
+	isync"
+	: "=&r"(tmp)
+	: "r"(&lock->lock), "r"(1)
+	: "cr0", "memory");
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__("eieio		# spin_unlock": : :"memory");
+	lock->lock = 0;
+}
+
+#define _raw_spin_trylock(l) (!test_and_set_bit(0,&(l)->lock))
+
+#else
+
+extern void _raw_spin_lock(spinlock_t *lock);
+extern void _raw_spin_unlock(spinlock_t *lock);
+extern int _raw_spin_trylock(spinlock_t *lock);
+
+#endif
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	volatile signed int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+#define rwlock_init(lp) do { *(lp) = RW_LOCK_UNLOCKED; } while(0)
+
+#define read_can_lock(rw)	((rw)->lock >= 0)
+#define write_can_lock(rw)	(!(rw)->lock)
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+static __inline__ int _raw_read_trylock(rwlock_t *rw)
+{
+	signed int tmp;
+
+	__asm__ __volatile__(
+"2:	lwarx	%0,0,%1		# read_trylock\n\
+	addic.	%0,%0,1\n\
+	ble-	1f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	2b\n\
+	isync\n\
+1:"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+
+	return tmp > 0;
+}
+
+static __inline__ void _raw_read_lock(rwlock_t *rw)
+{
+	signed int tmp;
+
+	__asm__ __volatile__(
+	"b	2f		# read_lock\n\
+1:	lwzx	%0,0,%1\n\
+	cmpwi	0,%0,0\n\
+	blt+	1b\n\
+2:	lwarx	%0,0,%1\n\
+	addic.	%0,%0,1\n\
+	ble-	1b\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	2b\n\
+	isync"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+static __inline__ void _raw_read_unlock(rwlock_t *rw)
+{
+	signed int tmp;
+
+	__asm__ __volatile__(
+	"eieio			# read_unlock\n\
+1:	lwarx	%0,0,%1\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+static __inline__ int _raw_write_trylock(rwlock_t *rw)
+{
+	signed int tmp;
+
+	__asm__ __volatile__(
+"2:	lwarx	%0,0,%1		# write_trylock\n\
+	cmpwi	0,%0,0\n\
+	bne-	1f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%2,0,%1\n\
+	bne-	2b\n\
+	isync\n\
+1:"
+	: "=&r"(tmp)
+	: "r"(&rw->lock), "r"(-1)
+	: "cr0", "memory");
+
+	return tmp == 0;
+}
+
+static __inline__ void _raw_write_lock(rwlock_t *rw)
+{
+	signed int tmp;
+
+	__asm__ __volatile__(
+	"b	2f		# write_lock\n\
+1:  	lwzx	%0,0,%1\n\
+	cmpwi	0,%0,0\n\
+	bne+	1b\n\
+2:	lwarx	%0,0,%1\n\
+	cmpwi	0,%0,0\n\
+	bne-	1b\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%2,0,%1\n\
+	bne-	2b\n\
+	isync"
+	: "=&r"(tmp)
+	: "r"(&rw->lock), "r"(-1)
+	: "cr0", "memory");
+}
+
+static __inline__ void _raw_write_unlock(rwlock_t *rw)
+{
+	__asm__ __volatile__("eieio		# write_unlock": : :"memory");
+	rw->lock = 0;
+}
+
+#else
+
+extern void _raw_read_lock(rwlock_t *rw);
+extern void _raw_read_unlock(rwlock_t *rw);
+extern void _raw_write_lock(rwlock_t *rw);
+extern void _raw_write_unlock(rwlock_t *rw);
+extern int _raw_read_trylock(rwlock_t *rw);
+extern int _raw_write_trylock(rwlock_t *rw);
+
+#endif
+
+#endif /* __ASM_SPINLOCK_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/stat.h b/include/asm-ppc/stat.h
new file mode 100644
index 000000000000..cadb34298496
--- /dev/null
+++ b/include/asm-ppc/stat.h
@@ -0,0 +1,69 @@
+#ifndef _PPC_STAT_H
+#define _PPC_STAT_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif /* __KERNEL__ */
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned	st_dev;
+	ino_t		st_ino;
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+	uid_t 		st_uid;
+	gid_t 		st_gid;
+	unsigned	st_rdev;
+	off_t		st_size;
+	unsigned long  	st_blksize;
+	unsigned long  	st_blocks;
+	unsigned long  	st_atime;
+	unsigned long  	st_atime_nsec;
+	unsigned long  	st_mtime;
+	unsigned long  	st_mtime_nsec;
+	unsigned long  	st_ctime;
+	unsigned long  	st_ctime_nsec;
+	unsigned long  	__unused4;
+	unsigned long  	__unused5;
+};
+
+/* This matches struct stat64 in glibc2.1.
+ */
+struct stat64 {
+	unsigned long long st_dev; 	/* Device.  */
+	unsigned long long st_ino;	/* File serial number.  */
+	unsigned int st_mode;		/* File mode.  */
+	unsigned int st_nlink;		/* Link count.  */
+	unsigned int st_uid;		/* User ID of the file's owner.  */
+	unsigned int st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev; 	/* Device number, if device.  */
+	unsigned short int __pad2;
+	long long st_size;		/* Size of file, in bytes.  */
+	long st_blksize;		/* Optimal block size for I/O.  */
+
+	long long st_blocks;		/* Number 512-byte blocks allocated. */
+	long st_atime;			/* Time of last access.  */
+	unsigned long st_atime_nsec;
+	long st_mtime;			/* Time of last modification.  */
+	unsigned long int st_mtime_nsec;
+	long st_ctime;			/* Time of last status change.  */
+	unsigned long int st_ctime_nsec;
+	unsigned long int __unused4;
+	unsigned long int __unused5;
+};
+#endif
diff --git a/include/asm-ppc/statfs.h b/include/asm-ppc/statfs.h
new file mode 100644
index 000000000000..807c69954a1b
--- /dev/null
+++ b/include/asm-ppc/statfs.h
@@ -0,0 +1,8 @@
+#ifndef _PPC_STATFS_H
+#define _PPC_STATFS_H
+
+#include <asm-generic/statfs.h>
+#endif
+
+
+
diff --git a/include/asm-ppc/string.h b/include/asm-ppc/string.h
new file mode 100644
index 000000000000..225575997392
--- /dev/null
+++ b/include/asm-ppc/string.h
@@ -0,0 +1,32 @@
+#ifndef _PPC_STRING_H_
+#define _PPC_STRING_H_
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern int strcasecmp(const char *, const char *);
+extern int strncasecmp(const char *, const char *, int);
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-ppc/suspend.h b/include/asm-ppc/suspend.h
new file mode 100644
index 000000000000..3df9f32bd834
--- /dev/null
+++ b/include/asm-ppc/suspend.h
@@ -0,0 +1,12 @@
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+static inline void save_processor_state(void)
+{
+}
+
+static inline void restore_processor_state(void)
+{
+}
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
new file mode 100644
index 000000000000..82395f30004b
--- /dev/null
+++ b/include/asm-ppc/system.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef __PPC_SYSTEM_H
+#define __PPC_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <asm/atomic.h>
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We can use the eieio instruction for wmb, but since it doesn't
+ * give any ordering guarantees about loads, we have to use the
+ * stronger but slower sync instruction for mb and rmb.
+ */
+#define mb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("eieio" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif /* CONFIG_SMP */
+
+#ifdef __KERNEL__
+struct task_struct;
+struct pt_regs;
+
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR()	0L
+#define _get_L3CR()	0L
+#define _set_L2CR(val)	do { } while(0)
+#define _set_L3CR(val)	do { } while(0)
+#endif
+extern void via_cuda_init(void);
+extern void pmac_nvram_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void enable_kernel_fp(void);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
+extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern void die(const char *, struct pt_regs *, long);
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+	struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+				   struct thread_struct *next);
+
+extern unsigned int rtas_data;
+
+static __inline__ unsigned long
+xchg_u32(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ ("\n\
+1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "=m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return (unsigned long) xchg_u32(ptr, x);
+#if 0	/* xchg_u64 doesn't exist on 32-bit PPC */
+	case 8:
+		return (unsigned long) xchg_u64(ptr, x);
+#endif /* 0 */
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+
+
+}
+
+extern inline void * xchg_ptr(void * m, void * val)
+{
+	return (void *) xchg_u32(m, (unsigned long) val);
+}
+
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ ("\n\
+1:	lwarx	%0,0,%2 \n\
+	cmpw	0,%0,%3 \n\
+	bne	2f \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2 \n\
+	bne-	1b\n"
+#ifdef CONFIG_SMP
+"	sync\n"
+#endif /* CONFIG_SMP */
+"2:"
+	: "=&r" (prev), "=m" (*p)
+	: "r" (p), "r" (old), "r" (new), "m" (*p)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+#if 0	/* we don't have __cmpxchg_u64 on 32-bit PPC */
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+#endif /* 0 */
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_SYSTEM_H */
diff --git a/include/asm-ppc/termbits.h b/include/asm-ppc/termbits.h
new file mode 100644
index 000000000000..c343fb7bdfed
--- /dev/null
+++ b/include/asm-ppc/termbits.h
@@ -0,0 +1,185 @@
+#ifndef _PPC_TERMBITS_H
+#define _PPC_TERMBITS_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 	0
+#define VQUIT 	1
+#define VERASE 	2
+#define VKILL	3
+#define VEOF	4
+#define VMIN	5
+#define VEOL	6
+#define VTIME	7
+#define VEOL2	8
+#define VSWTC	9
+
+#define VWERASE 	10
+#define VREPRINT	11
+#define VSUSP 		12
+#define VSTART		13
+#define VSTOP		14
+#define VLNEXT		15
+#define VDISCARD	16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY		0004000
+#define IUCLC		0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define   XTABS	00006000	/* required by POSIX to == TAB3 */
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+
+/* c_cflag bit meaning */
+#define CBAUD	0000377
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _PPC_TERMBITS_H */
diff --git a/include/asm-ppc/termios.h b/include/asm-ppc/termios.h
new file mode 100644
index 000000000000..97c6287a6cba
--- /dev/null
+++ b/include/asm-ppc/termios.h
@@ -0,0 +1,232 @@
+#ifndef _PPC_TERMIOS_H
+#define _PPC_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+#ifdef __KERNEL__
+/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025"
+#endif	/* __KERNEL__ */
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	(termios)->x = (0xffff0000 & (termios)->x) | __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _PPC_TERMIOS_H */
diff --git a/include/asm-ppc/thread_info.h b/include/asm-ppc/thread_info.h
new file mode 100644
index 000000000000..f7f01524e8a8
--- /dev/null
+++ b/include/asm-ppc/thread_info.h
@@ -0,0 +1,99 @@
+/* thread_info.h: PPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		local_flags;	/* non-racy flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.flags =	0,			\
+	.local_flags =  0,			\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("rlwinm %0,1,0,0,18" : "=r"(ti));
+	return ti;
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+				__get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ */
+#define THREAD_SIZE		8192	/* 2 pages */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		5
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+/*
+ * Non racy (local) flags bit numbers
+ */
+#define TIFL_FORCE_NOERROR	0	/* don't return error from current
+					   syscall even if result < 0 */
+
+/* as above, but as bit values */
+#define _TIFL_FORCE_NOERROR	(1<<TIFL_FORCE_NOERROR)
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
new file mode 100644
index 000000000000..ce09b47fa819
--- /dev/null
+++ b/include/asm-ppc/time.h
@@ -0,0 +1,157 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@fsmlabs.com) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_TIME_H__
+#define __ASM_TIME_H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/threads.h>
+
+#include <asm/reg.h>
+
+/* time.c */
+extern unsigned tb_ticks_per_jiffy;
+extern unsigned tb_to_us;
+extern unsigned tb_last_stamp;
+extern unsigned long disarm_decr[NR_CPUS];
+
+extern void to_tm(int tim, struct rtc_time * tm);
+extern time_t last_rtc_update;
+
+extern void set_dec_cpu6(unsigned int val);
+
+int via_calibrate_decr(void);
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer.  I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode.  The problem is PIT stops counting when it
+ * hits zero.  If it would wrap, we could use it just like a decrementer.
+ */
+static __inline__ unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+	return (mfspr(SPRN_PIT));
+#else
+	return (mfspr(SPRN_DEC));
+#endif
+}
+
+static __inline__ void set_dec(unsigned int val)
+{
+#if defined(CONFIG_40x)
+	return;		/* Have to let it auto-reload */
+#elif defined(CONFIG_8xx_CPU6)
+	set_dec_cpu6(val);
+#else
+	mtspr(SPRN_DEC, val);
+#endif
+}
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+extern __inline__ int const __USE_RTC(void) {
+	return (mfspr(SPRN_PVR)>>16) == 1;
+}
+#else
+#define __USE_RTC() 0
+#endif
+
+extern __inline__ unsigned long get_tbl(void) {
+	unsigned long tbl;
+#if defined(CONFIG_403GCX)
+	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+#else
+	asm volatile("mftb %0" : "=r" (tbl));
+#endif
+	return tbl;
+}
+
+extern __inline__ unsigned long get_tbu(void) {
+	unsigned long tbl;
+#if defined(CONFIG_403GCX)
+	asm volatile("mfspr %0, 0x3dc" : "=r" (tbl));
+#else
+	asm volatile("mftbu %0" : "=r" (tbl));
+#endif
+	return tbl;
+}
+
+extern __inline__ void set_tb(unsigned int upper, unsigned int lower)
+{
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, upper);
+	mtspr(SPRN_TBWL, lower);
+}
+
+extern __inline__ unsigned long get_rtcl(void) {
+	unsigned long rtcl;
+	asm volatile("mfrtcl %0" : "=r" (rtcl));
+	return rtcl;
+}
+
+extern __inline__ unsigned long get_rtcu(void)
+{
+	unsigned long rtcu;
+	asm volatile("mfrtcu %0" : "=r" (rtcu));
+	return rtcu;
+}
+
+extern __inline__ unsigned get_native_tbl(void) {
+	if (__USE_RTC())
+		return get_rtcl();
+	else
+	  	return get_tbl();
+}
+
+/* On machines with RTC, this function can only be used safely
+ * after the timestamp and for 1 second. It is only used by gettimeofday
+ * however so it should not matter.
+ */
+extern __inline__ unsigned tb_ticks_since(unsigned tstamp) {
+	if (__USE_RTC()) {
+		int delta = get_rtcl() - tstamp;
+		return delta<0 ? delta + 1000000000 : delta;
+	} else {
+        	return get_tbl() - tstamp;
+	}
+}
+
+#if 0
+extern __inline__ unsigned long get_bin_rtcl(void) {
+      unsigned long rtcl, rtcu1, rtcu2;
+      asm volatile("\
+1:    mfrtcu  %0\n\
+      mfrtcl  %1\n\
+      mfrtcu  %2\n\
+      cmpw    %0,%2\n\
+      bne-    1b\n"
+      : "=r" (rtcu1), "=r" (rtcl), "=r" (rtcu2)
+      : : "cr0");
+      return rtcu2*1000000000+rtcl;
+}
+
+extern __inline__ unsigned binary_tbl(void) {
+      if (__USE_RTC())
+              return get_bin_rtcl();
+      else
+              return get_tbl();
+}
+#endif
+
+/* Use mulhwu to scale processor timebase to timeval */
+/* Specifically, this computes (x * y) / 2^32.  -- paulus */
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+unsigned mulhwu_scale_factor(unsigned, unsigned);
+#endif /* __ASM_TIME_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/timex.h b/include/asm-ppc/timex.h
new file mode 100644
index 000000000000..cffc8712077c
--- /dev/null
+++ b/include/asm-ppc/timex.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-ppc/timex.h
+ *
+ * ppc architecture timex specifications
+ */
+#ifdef __KERNEL__
+#ifndef _ASMppc_TIMEX_H
+#define _ASMppc_TIMEX_H
+
+#include <linux/config.h>
+#include <asm/cputable.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+/*
+ * For the "cycle" counter we use the timebase lower half.
+ * Currently only used on SMP.
+ */
+
+static inline cycles_t get_cycles(void)
+{
+	cycles_t ret = 0;
+
+	__asm__ __volatile__(
+		"98:	mftb %0\n"
+		"99:\n"
+		".section __ftr_fixup,\"a\"\n"
+		"	.long %1\n"
+		"	.long 0\n"
+		"	.long 98b\n"
+		"	.long 99b\n"
+		".previous"
+		: "=r" (ret) : "i" (CPU_FTR_601));
+	return ret;
+}
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/tlb.h b/include/asm-ppc/tlb.h
new file mode 100644
index 000000000000..2c142c5d8584
--- /dev/null
+++ b/include/asm-ppc/tlb.h
@@ -0,0 +1,57 @@
+/*
+ *	TLB shootdown specifics for PPC
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _PPC_TLB_H
+#define _PPC_TLB_H
+
+#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_STD_MMU
+/* Classic PPC with hash-table based MMU... */
+
+struct mmu_gather;
+extern void tlb_flush(struct mmu_gather *tlb);
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+/* Nothing needed here in fact... */
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					unsigned long address)
+{
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(tlb->mm, ptep, address);
+}
+
+#else
+/* Embedded PPC with software-loaded TLB, very simple... */
+
+#define tlb_start_vma(tlb, vma)		do { } while (0)
+#define tlb_end_vma(tlb, vma)		do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+#endif /* CONFIG_PPC_STD_MMU */
+
+#endif /* __PPC_TLB_H */
diff --git a/include/asm-ppc/tlbflush.h b/include/asm-ppc/tlbflush.h
new file mode 100644
index 000000000000..9850f53f54b0
--- /dev/null
+++ b/include/asm-ppc/tlbflush.h
@@ -0,0 +1,115 @@
+/*
+ * include/asm-ppc/tlbflush.h
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_TLBFLUSH_H
+#define _PPC_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#if defined(CONFIG_4xx)
+
+#ifndef CONFIG_44x
+#define __tlbia()	asm volatile ("sync; tlbia; isync" : : : "memory")
+#else
+#define __tlbia		_tlbia
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				unsigned long start, unsigned long end)
+	{ __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+				unsigned long end)
+	{ __tlbia(); }
+
+#elif defined(CONFIG_FSL_BOOKE)
+
+/* TODO: determine if flush_tlb_range & flush_tlb_kernel_range
+ * are best implemented as tlbia vs specific tlbie's */
+
+#define __tlbia()	_tlbia()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				unsigned long start, unsigned long end)
+	{ __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+				unsigned long end)
+	{ __tlbia(); }
+
+#elif defined(CONFIG_8xx)
+#define __tlbia()	asm volatile ("tlbia; sync" : : : "memory")
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct mm_struct *mm,
+				unsigned long start, unsigned long end)
+	{ __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+				unsigned long end)
+	{ __tlbia(); }
+
+#else	/* 6xx, 7xx, 7xxx cpus */
+struct mm_struct;
+struct vm_area_struct;
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages.  We don't need to do anything here, there's nothing special
+ * about our page-table pages.  -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+}
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* _PPC_TLBFLUSH_H */
+#endif /*__KERNEL__ */
diff --git a/include/asm-ppc/todc.h b/include/asm-ppc/todc.h
new file mode 100644
index 000000000000..84bae7d76814
--- /dev/null
+++ b/include/asm-ppc/todc.h
@@ -0,0 +1,490 @@
+/*
+ * include/asm-ppc/todc.h
+ *
+ * Definitions for the M48Txx and mc146818 series of Time of day/Real Time
+ * Clock chips.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips.
+ * Purpose is to make one generic file that handles all of these chips instead
+ * of every platform implementing the same code over & over again.
+ */
+
+#ifndef __PPC_KERNEL_TODC_H
+#define __PPC_KERNEL_TODC_H
+
+typedef struct {
+	uint rtc_type;		/* your particular chip */
+
+	/*
+	 * Following are the addresses of the AS0, AS1, and DATA registers
+	 * of these chips.  Note that these are board-specific.
+	 */
+	unsigned int nvram_as0;
+	unsigned int nvram_as1;
+	unsigned int nvram_data;
+
+	/*
+	 * Define bits to stop external set of regs from changing so
+	 * the chip can be read/written reliably.
+	 */
+	unsigned char enable_read;
+	unsigned char enable_write;
+
+	/*
+	 * Following is the number of AS0 address bits.  This is normally
+	 * 8 but some bad hardware routes address lines incorrectly.
+	 */
+	int as0_bits;
+
+	int nvram_size;	/* Size of NVRAM on chip */
+	int sw_flags;	/* Software control flags */
+
+	/* Following are the register offsets for the particular chip */
+	int year;
+	int month;
+	int day_of_month;
+	int day_of_week;
+	int hours;
+	int minutes;
+	int seconds;
+	int control_b;
+	int control_a;
+	int watchdog;
+	int interrupts;
+	int alarm_date;
+	int alarm_hour;
+	int alarm_minutes;
+	int alarm_seconds;
+	int century;
+	int flags;
+
+	/*
+	 * Some RTC chips have their NVRAM buried behind a addr/data pair of
+	 * regs on the first level/clock registers.  The following fields
+	 * are the addresses for those addr/data regs.
+	 */
+	int nvram_addr_reg;
+	int nvram_data_reg;
+} todc_info_t;
+
+/*
+ * Define the types of TODC/RTC variants that are supported in
+ * arch/ppc/kernel/todc_time.c
+ * Make a new one of these for any chip somehow differs from what's already
+ * defined.  That way, if you ever need to put in code to touch those
+ * bits/registers in todc_time.c, you can put it inside an
+ * 'if (todc_info->rtc_type ==  TODC_TYPE_XXX)' so you won't break
+ * anyone else.
+ */
+#define	TODC_TYPE_MK48T35		1
+#define	TODC_TYPE_MK48T37		2
+#define	TODC_TYPE_MK48T59		3
+#define	TODC_TYPE_DS1693		4	/* Dallas DS1693 RTC */
+#define	TODC_TYPE_DS1743		5	/* Dallas DS1743 RTC */
+#define	TODC_TYPE_DS1746		6	/* Dallas DS1746 RTC */
+#define	TODC_TYPE_DS1747		7	/* Dallas DS1747 RTC */
+#define	TODC_TYPE_DS1501		8	/* Dallas DS1501 RTC */
+#define TODC_TYPE_DS1643		9	/* Dallas DS1643 RTC */
+#define TODC_TYPE_PC97307		10	/* PC97307 internal RTC */
+#define TODC_TYPE_DS1557		11	/* Dallas DS1557 RTC */
+#define TODC_TYPE_DS17285		12	/* Dallas DS17285 RTC */
+#define TODC_TYPE_DS1553		13	/* Dallas DS1553 RTC */
+#define	TODC_TYPE_MC146818		100	/* Leave room for m48txx's */
+
+/*
+ * Bit to clear/set to enable reads/writes to the chip
+ */
+#define	TODC_MK48TXX_CNTL_A_R		0x40
+#define	TODC_MK48TXX_CNTL_A_W		0x80
+#define	TODC_MK48TXX_DAY_CB		0x80
+
+#define	TODC_DS1501_CNTL_B_TE		0x80
+
+/*
+ * Define flag bits used by todc routines.
+ */
+#define	TODC_FLAG_2_LEVEL_NVRAM		0x00000001
+
+/*
+ * Define the values for the various RTC's that should to into the todc_info
+ * table.
+ * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only
+ * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set.
+ */
+#define	TODC_TYPE_MK48T35_NVRAM_SIZE		0x7ff8
+#define	TODC_TYPE_MK48T35_SW_FLAGS		0
+#define	TODC_TYPE_MK48T35_YEAR			0x7fff
+#define	TODC_TYPE_MK48T35_MONTH			0x7ffe
+#define	TODC_TYPE_MK48T35_DOM			0x7ffd	/* Day of Month */
+#define	TODC_TYPE_MK48T35_DOW			0x7ffc	/* Day of Week */
+#define	TODC_TYPE_MK48T35_HOURS			0x7ffb
+#define	TODC_TYPE_MK48T35_MINUTES		0x7ffa
+#define	TODC_TYPE_MK48T35_SECONDS		0x7ff9
+#define	TODC_TYPE_MK48T35_CNTL_B		0x7ff9
+#define	TODC_TYPE_MK48T35_CNTL_A		0x7ff8
+#define	TODC_TYPE_MK48T35_WATCHDOG		0x0000
+#define	TODC_TYPE_MK48T35_INTERRUPTS		0x0000
+#define	TODC_TYPE_MK48T35_ALARM_DATE		0x0000
+#define	TODC_TYPE_MK48T35_ALARM_HOUR		0x0000
+#define	TODC_TYPE_MK48T35_ALARM_MINUTES		0x0000
+#define	TODC_TYPE_MK48T35_ALARM_SECONDS		0x0000
+#define	TODC_TYPE_MK48T35_CENTURY		0x0000
+#define	TODC_TYPE_MK48T35_FLAGS			0x0000
+#define	TODC_TYPE_MK48T35_NVRAM_ADDR_REG	0
+#define	TODC_TYPE_MK48T35_NVRAM_DATA_REG	0
+
+#define	TODC_TYPE_MK48T37_NVRAM_SIZE		0x7ff0
+#define	TODC_TYPE_MK48T37_SW_FLAGS		0
+#define	TODC_TYPE_MK48T37_YEAR			0x7fff
+#define	TODC_TYPE_MK48T37_MONTH			0x7ffe
+#define	TODC_TYPE_MK48T37_DOM			0x7ffd	/* Day of Month */
+#define	TODC_TYPE_MK48T37_DOW			0x7ffc	/* Day of Week */
+#define	TODC_TYPE_MK48T37_HOURS			0x7ffb
+#define	TODC_TYPE_MK48T37_MINUTES		0x7ffa
+#define	TODC_TYPE_MK48T37_SECONDS		0x7ff9
+#define	TODC_TYPE_MK48T37_CNTL_B		0x7ff9
+#define	TODC_TYPE_MK48T37_CNTL_A		0x7ff8
+#define	TODC_TYPE_MK48T37_WATCHDOG		0x7ff7
+#define	TODC_TYPE_MK48T37_INTERRUPTS		0x7ff6
+#define	TODC_TYPE_MK48T37_ALARM_DATE		0x7ff5
+#define	TODC_TYPE_MK48T37_ALARM_HOUR		0x7ff4
+#define	TODC_TYPE_MK48T37_ALARM_MINUTES		0x7ff3
+#define	TODC_TYPE_MK48T37_ALARM_SECONDS		0x7ff2
+#define	TODC_TYPE_MK48T37_CENTURY		0x7ff1
+#define	TODC_TYPE_MK48T37_FLAGS			0x7ff0
+#define	TODC_TYPE_MK48T37_NVRAM_ADDR_REG	0
+#define	TODC_TYPE_MK48T37_NVRAM_DATA_REG	0
+
+#define	TODC_TYPE_MK48T59_NVRAM_SIZE		0x1ff0
+#define	TODC_TYPE_MK48T59_SW_FLAGS		0
+#define	TODC_TYPE_MK48T59_YEAR			0x1fff
+#define	TODC_TYPE_MK48T59_MONTH			0x1ffe
+#define	TODC_TYPE_MK48T59_DOM			0x1ffd	/* Day of Month */
+#define	TODC_TYPE_MK48T59_DOW			0x1ffc	/* Day of Week */
+#define	TODC_TYPE_MK48T59_HOURS			0x1ffb
+#define	TODC_TYPE_MK48T59_MINUTES		0x1ffa
+#define	TODC_TYPE_MK48T59_SECONDS		0x1ff9
+#define	TODC_TYPE_MK48T59_CNTL_B		0x1ff9
+#define	TODC_TYPE_MK48T59_CNTL_A		0x1ff8
+#define	TODC_TYPE_MK48T59_WATCHDOG		0x1fff
+#define	TODC_TYPE_MK48T59_INTERRUPTS		0x1fff
+#define	TODC_TYPE_MK48T59_ALARM_DATE		0x1fff
+#define	TODC_TYPE_MK48T59_ALARM_HOUR		0x1fff
+#define	TODC_TYPE_MK48T59_ALARM_MINUTES		0x1fff
+#define	TODC_TYPE_MK48T59_ALARM_SECONDS		0x1fff
+#define	TODC_TYPE_MK48T59_CENTURY		0x1fff
+#define	TODC_TYPE_MK48T59_FLAGS			0x1fff
+#define	TODC_TYPE_MK48T59_NVRAM_ADDR_REG	0
+#define	TODC_TYPE_MK48T59_NVRAM_DATA_REG	0
+
+#define	TODC_TYPE_DS1501_NVRAM_SIZE	0x100
+#define	TODC_TYPE_DS1501_SW_FLAGS	TODC_FLAG_2_LEVEL_NVRAM
+#define	TODC_TYPE_DS1501_YEAR		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x06)
+#define	TODC_TYPE_DS1501_MONTH		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x05)
+#define	TODC_TYPE_DS1501_DOM		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x04)
+#define	TODC_TYPE_DS1501_DOW		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x03)
+#define	TODC_TYPE_DS1501_HOURS		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x02)
+#define	TODC_TYPE_DS1501_MINUTES	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x01)
+#define	TODC_TYPE_DS1501_SECONDS	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x00)
+#define	TODC_TYPE_DS1501_CNTL_B		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define	TODC_TYPE_DS1501_CNTL_A		(TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define	TODC_TYPE_DS1501_WATCHDOG	(TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define	TODC_TYPE_DS1501_INTERRUPTS	(TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define	TODC_TYPE_DS1501_ALARM_DATE	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b)
+#define	TODC_TYPE_DS1501_ALARM_HOUR	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a)
+#define	TODC_TYPE_DS1501_ALARM_MINUTES	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x09)
+#define	TODC_TYPE_DS1501_ALARM_SECONDS	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x08)
+#define	TODC_TYPE_DS1501_CENTURY	(TODC_TYPE_DS1501_NVRAM_SIZE + 0x07)
+#define	TODC_TYPE_DS1501_FLAGS		(TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define	TODC_TYPE_DS1501_NVRAM_ADDR_REG	0x10
+#define	TODC_TYPE_DS1501_NVRAM_DATA_REG	0x13
+
+#define	TODC_TYPE_DS1553_NVRAM_SIZE		0x1ff0
+#define	TODC_TYPE_DS1553_SW_FLAGS		0
+#define	TODC_TYPE_DS1553_YEAR			0x1fff
+#define	TODC_TYPE_DS1553_MONTH			0x1ffe
+#define	TODC_TYPE_DS1553_DOM			0x1ffd	/* Day of Month */
+#define	TODC_TYPE_DS1553_DOW			0x1ffc	/* Day of Week */
+#define	TODC_TYPE_DS1553_HOURS			0x1ffb
+#define	TODC_TYPE_DS1553_MINUTES		0x1ffa
+#define	TODC_TYPE_DS1553_SECONDS		0x1ff9
+#define	TODC_TYPE_DS1553_CNTL_B			0x1ff9
+#define	TODC_TYPE_DS1553_CNTL_A			0x1ff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1553_WATCHDOG		0x1ff7
+#define	TODC_TYPE_DS1553_INTERRUPTS		0x1ff6
+#define	TODC_TYPE_DS1553_ALARM_DATE		0x1ff5
+#define	TODC_TYPE_DS1553_ALARM_HOUR		0x1ff4
+#define	TODC_TYPE_DS1553_ALARM_MINUTES		0x1ff3
+#define	TODC_TYPE_DS1553_ALARM_SECONDS		0x1ff2
+#define	TODC_TYPE_DS1553_CENTURY		0x1ff8
+#define	TODC_TYPE_DS1553_FLAGS			0x1ff0
+#define	TODC_TYPE_DS1553_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1553_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1557_NVRAM_SIZE		0x7fff0
+#define	TODC_TYPE_DS1557_SW_FLAGS		0
+#define	TODC_TYPE_DS1557_YEAR			0x7ffff
+#define	TODC_TYPE_DS1557_MONTH			0x7fffe
+#define	TODC_TYPE_DS1557_DOM			0x7fffd	/* Day of Month */
+#define	TODC_TYPE_DS1557_DOW			0x7fffc	/* Day of Week */
+#define	TODC_TYPE_DS1557_HOURS			0x7fffb
+#define	TODC_TYPE_DS1557_MINUTES		0x7fffa
+#define	TODC_TYPE_DS1557_SECONDS		0x7fff9
+#define	TODC_TYPE_DS1557_CNTL_B			0x7fff9
+#define	TODC_TYPE_DS1557_CNTL_A			0x7fff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1557_WATCHDOG		0x7fff7
+#define	TODC_TYPE_DS1557_INTERRUPTS		0x7fff6
+#define	TODC_TYPE_DS1557_ALARM_DATE		0x7fff5
+#define	TODC_TYPE_DS1557_ALARM_HOUR		0x7fff4
+#define	TODC_TYPE_DS1557_ALARM_MINUTES		0x7fff3
+#define	TODC_TYPE_DS1557_ALARM_SECONDS		0x7fff2
+#define	TODC_TYPE_DS1557_CENTURY		0x7fff8
+#define	TODC_TYPE_DS1557_FLAGS			0x7fff0
+#define	TODC_TYPE_DS1557_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1557_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1643_NVRAM_SIZE		0x1ff8
+#define	TODC_TYPE_DS1643_SW_FLAGS		0
+#define	TODC_TYPE_DS1643_YEAR			0x1fff
+#define	TODC_TYPE_DS1643_MONTH			0x1ffe
+#define	TODC_TYPE_DS1643_DOM			0x1ffd	/* Day of Month */
+#define	TODC_TYPE_DS1643_DOW			0x1ffc	/* Day of Week */
+#define	TODC_TYPE_DS1643_HOURS			0x1ffb
+#define	TODC_TYPE_DS1643_MINUTES		0x1ffa
+#define	TODC_TYPE_DS1643_SECONDS		0x1ff9
+#define	TODC_TYPE_DS1643_CNTL_B			0x1ff9
+#define	TODC_TYPE_DS1643_CNTL_A			0x1ff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1643_WATCHDOG		0x1fff
+#define	TODC_TYPE_DS1643_INTERRUPTS		0x1fff
+#define	TODC_TYPE_DS1643_ALARM_DATE		0x1fff
+#define	TODC_TYPE_DS1643_ALARM_HOUR		0x1fff
+#define	TODC_TYPE_DS1643_ALARM_MINUTES		0x1fff
+#define	TODC_TYPE_DS1643_ALARM_SECONDS		0x1fff
+#define	TODC_TYPE_DS1643_CENTURY		0x1ff8
+#define	TODC_TYPE_DS1643_FLAGS			0x1fff
+#define	TODC_TYPE_DS1643_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1643_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1693_NVRAM_SIZE		0 /* Not handled yet */
+#define	TODC_TYPE_DS1693_SW_FLAGS		0
+#define	TODC_TYPE_DS1693_YEAR			0x09
+#define	TODC_TYPE_DS1693_MONTH			0x08
+#define	TODC_TYPE_DS1693_DOM			0x07	/* Day of Month */
+#define	TODC_TYPE_DS1693_DOW			0x06	/* Day of Week */
+#define	TODC_TYPE_DS1693_HOURS			0x04
+#define	TODC_TYPE_DS1693_MINUTES		0x02
+#define	TODC_TYPE_DS1693_SECONDS		0x00
+#define	TODC_TYPE_DS1693_CNTL_B			0x0b
+#define	TODC_TYPE_DS1693_CNTL_A			0x0a
+#define	TODC_TYPE_DS1693_WATCHDOG		0xff
+#define	TODC_TYPE_DS1693_INTERRUPTS		0xff
+#define	TODC_TYPE_DS1693_ALARM_DATE		0x49
+#define	TODC_TYPE_DS1693_ALARM_HOUR		0x05
+#define	TODC_TYPE_DS1693_ALARM_MINUTES		0x03
+#define	TODC_TYPE_DS1693_ALARM_SECONDS		0x01
+#define	TODC_TYPE_DS1693_CENTURY		0x48
+#define	TODC_TYPE_DS1693_FLAGS			0xff
+#define	TODC_TYPE_DS1693_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1693_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1743_NVRAM_SIZE		0x1ff8
+#define	TODC_TYPE_DS1743_SW_FLAGS		0
+#define	TODC_TYPE_DS1743_YEAR			0x1fff
+#define	TODC_TYPE_DS1743_MONTH			0x1ffe
+#define	TODC_TYPE_DS1743_DOM			0x1ffd	/* Day of Month */
+#define	TODC_TYPE_DS1743_DOW			0x1ffc	/* Day of Week */
+#define	TODC_TYPE_DS1743_HOURS			0x1ffb
+#define	TODC_TYPE_DS1743_MINUTES		0x1ffa
+#define	TODC_TYPE_DS1743_SECONDS		0x1ff9
+#define	TODC_TYPE_DS1743_CNTL_B			0x1ff9
+#define	TODC_TYPE_DS1743_CNTL_A			0x1ff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1743_WATCHDOG		0x1fff
+#define	TODC_TYPE_DS1743_INTERRUPTS		0x1fff
+#define	TODC_TYPE_DS1743_ALARM_DATE		0x1fff
+#define	TODC_TYPE_DS1743_ALARM_HOUR		0x1fff
+#define	TODC_TYPE_DS1743_ALARM_MINUTES		0x1fff
+#define	TODC_TYPE_DS1743_ALARM_SECONDS		0x1fff
+#define	TODC_TYPE_DS1743_CENTURY		0x1ff8
+#define	TODC_TYPE_DS1743_FLAGS			0x1fff
+#define	TODC_TYPE_DS1743_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1743_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1746_NVRAM_SIZE		0x1fff8
+#define	TODC_TYPE_DS1746_SW_FLAGS		0
+#define	TODC_TYPE_DS1746_YEAR			0x1ffff
+#define	TODC_TYPE_DS1746_MONTH			0x1fffe
+#define	TODC_TYPE_DS1746_DOM			0x1fffd	/* Day of Month */
+#define	TODC_TYPE_DS1746_DOW			0x1fffc	/* Day of Week */
+#define	TODC_TYPE_DS1746_HOURS			0x1fffb
+#define	TODC_TYPE_DS1746_MINUTES		0x1fffa
+#define	TODC_TYPE_DS1746_SECONDS		0x1fff9
+#define	TODC_TYPE_DS1746_CNTL_B			0x1fff9
+#define	TODC_TYPE_DS1746_CNTL_A			0x1fff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1746_WATCHDOG		0x00000
+#define	TODC_TYPE_DS1746_INTERRUPTS		0x00000
+#define	TODC_TYPE_DS1746_ALARM_DATE		0x00000
+#define	TODC_TYPE_DS1746_ALARM_HOUR		0x00000
+#define	TODC_TYPE_DS1746_ALARM_MINUTES		0x00000
+#define	TODC_TYPE_DS1746_ALARM_SECONDS		0x00000
+#define	TODC_TYPE_DS1746_CENTURY		0x00000
+#define	TODC_TYPE_DS1746_FLAGS			0x00000
+#define	TODC_TYPE_DS1746_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1746_NVRAM_DATA_REG		0
+
+#define	TODC_TYPE_DS1747_NVRAM_SIZE		0x7fff8
+#define	TODC_TYPE_DS1747_SW_FLAGS		0
+#define	TODC_TYPE_DS1747_YEAR			0x7ffff
+#define	TODC_TYPE_DS1747_MONTH			0x7fffe
+#define	TODC_TYPE_DS1747_DOM			0x7fffd	/* Day of Month */
+#define	TODC_TYPE_DS1747_DOW			0x7fffc	/* Day of Week */
+#define	TODC_TYPE_DS1747_HOURS			0x7fffb
+#define	TODC_TYPE_DS1747_MINUTES		0x7fffa
+#define	TODC_TYPE_DS1747_SECONDS		0x7fff9
+#define	TODC_TYPE_DS1747_CNTL_B			0x7fff9
+#define	TODC_TYPE_DS1747_CNTL_A			0x7fff8	/* control_a R/W regs */
+#define	TODC_TYPE_DS1747_WATCHDOG		0x00000
+#define	TODC_TYPE_DS1747_INTERRUPTS		0x00000
+#define	TODC_TYPE_DS1747_ALARM_DATE		0x00000
+#define	TODC_TYPE_DS1747_ALARM_HOUR		0x00000
+#define	TODC_TYPE_DS1747_ALARM_MINUTES		0x00000
+#define	TODC_TYPE_DS1747_ALARM_SECONDS		0x00000
+#define	TODC_TYPE_DS1747_CENTURY		0x00000
+#define	TODC_TYPE_DS1747_FLAGS			0x00000
+#define	TODC_TYPE_DS1747_NVRAM_ADDR_REG		0
+#define	TODC_TYPE_DS1747_NVRAM_DATA_REG		0
+
+#define TODC_TYPE_DS17285_NVRAM_SIZE		(0x1000-0x80)    /* 4Kx8 NVRAM (minus RTC regs) */
+#define TODC_TYPE_DS17285_SW_FLAGS		TODC_FLAG_2_LEVEL_NVRAM
+#define TODC_TYPE_DS17285_SECONDS		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x00)
+#define TODC_TYPE_DS17285_ALARM_SECONDS		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x01)
+#define TODC_TYPE_DS17285_MINUTES		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x02)
+#define TODC_TYPE_DS17285_ALARM_MINUTES		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x03)
+#define TODC_TYPE_DS17285_HOURS			(TODC_TYPE_DS17285_NVRAM_SIZE + 0x04)
+#define TODC_TYPE_DS17285_ALARM_HOUR		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x05)
+#define TODC_TYPE_DS17285_DOW			(TODC_TYPE_DS17285_NVRAM_SIZE + 0x06)
+#define TODC_TYPE_DS17285_DOM			(TODC_TYPE_DS17285_NVRAM_SIZE + 0x07)
+#define TODC_TYPE_DS17285_MONTH			(TODC_TYPE_DS17285_NVRAM_SIZE + 0x08)
+#define TODC_TYPE_DS17285_YEAR			(TODC_TYPE_DS17285_NVRAM_SIZE + 0x09)
+#define TODC_TYPE_DS17285_CNTL_A		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A)
+#define TODC_TYPE_DS17285_CNTL_B		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B)
+#define TODC_TYPE_DS17285_CNTL_C		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C)
+#define TODC_TYPE_DS17285_CNTL_D		(TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D)
+#define TODC_TYPE_DS17285_WATCHDOG		0
+#define TODC_TYPE_DS17285_INTERRUPTS		0
+#define TODC_TYPE_DS17285_ALARM_DATE		0
+#define TODC_TYPE_DS17285_CENTURY		0
+#define TODC_TYPE_DS17285_FLAGS			0
+#define TODC_TYPE_DS17285_NVRAM_ADDR_REG	0x50
+#define TODC_TYPE_DS17285_NVRAM_DATA_REG	0x53
+ 
+#define	TODC_TYPE_MC146818_NVRAM_SIZE		0	/* XXXX */
+#define	TODC_TYPE_MC146818_SW_FLAGS		0
+#define	TODC_TYPE_MC146818_YEAR			0x09
+#define	TODC_TYPE_MC146818_MONTH		0x08
+#define	TODC_TYPE_MC146818_DOM			0x07	/* Day of Month */
+#define	TODC_TYPE_MC146818_DOW			0x06	/* Day of Week */
+#define	TODC_TYPE_MC146818_HOURS		0x04
+#define	TODC_TYPE_MC146818_MINUTES		0x02
+#define	TODC_TYPE_MC146818_SECONDS		0x00
+#define	TODC_TYPE_MC146818_CNTL_B		0x0a
+#define	TODC_TYPE_MC146818_CNTL_A		0x0b	/* control_a R/W regs */
+#define	TODC_TYPE_MC146818_WATCHDOG		0
+#define	TODC_TYPE_MC146818_INTERRUPTS		0x0c
+#define	TODC_TYPE_MC146818_ALARM_DATE		0xff
+#define	TODC_TYPE_MC146818_ALARM_HOUR		0x05
+#define	TODC_TYPE_MC146818_ALARM_MINUTES	0x03
+#define	TODC_TYPE_MC146818_ALARM_SECONDS	0x01
+#define	TODC_TYPE_MC146818_CENTURY		0xff
+#define	TODC_TYPE_MC146818_FLAGS		0xff
+#define	TODC_TYPE_MC146818_NVRAM_ADDR_REG	0
+#define	TODC_TYPE_MC146818_NVRAM_DATA_REG	0
+  
+#define	TODC_TYPE_PC97307_NVRAM_SIZE		0	/* No NVRAM? */
+#define	TODC_TYPE_PC97307_SW_FLAGS		0
+#define	TODC_TYPE_PC97307_YEAR			0x09
+#define	TODC_TYPE_PC97307_MONTH			0x08
+#define	TODC_TYPE_PC97307_DOM			0x07	/* Day of Month */
+#define	TODC_TYPE_PC97307_DOW			0x06	/* Day of Week */
+#define	TODC_TYPE_PC97307_HOURS			0x04
+#define	TODC_TYPE_PC97307_MINUTES		0x02
+#define	TODC_TYPE_PC97307_SECONDS		0x00
+#define	TODC_TYPE_PC97307_CNTL_B		0x0a
+#define	TODC_TYPE_PC97307_CNTL_A		0x0b	/* control_a R/W regs */
+#define	TODC_TYPE_PC97307_WATCHDOG		0x0c
+#define	TODC_TYPE_PC97307_INTERRUPTS		0x0d
+#define	TODC_TYPE_PC97307_ALARM_DATE		0xff
+#define	TODC_TYPE_PC97307_ALARM_HOUR		0x05
+#define	TODC_TYPE_PC97307_ALARM_MINUTES		0x03
+#define	TODC_TYPE_PC97307_ALARM_SECONDS		0x01
+#define	TODC_TYPE_PC97307_CENTURY		0xff
+#define	TODC_TYPE_PC97307_FLAGS			0xff
+#define	TODC_TYPE_PC97307_NVRAM_ADDR_REG	0
+#define	TODC_TYPE_PC97307_NVRAM_DATA_REG	0
+
+/*
+ * Define macros to allocate and init the todc_info_t table that will
+ * be used by the todc_time.c routines.
+ */
+#define	TODC_ALLOC()							\
+	static todc_info_t todc_info_alloc;				\
+	todc_info_t *todc_info = &todc_info_alloc;
+
+#define	TODC_INIT(clock_type, as0, as1, data, bits) {			\
+	todc_info->rtc_type = clock_type;				\
+									\
+	todc_info->nvram_as0  = (unsigned int)(as0);			\
+	todc_info->nvram_as1  = (unsigned int)(as1);			\
+	todc_info->nvram_data = (unsigned int)(data);			\
+									\
+	todc_info->as0_bits = (bits);					\
+									\
+	todc_info->nvram_size     = clock_type ##_NVRAM_SIZE;		\
+	todc_info->sw_flags       = clock_type ##_SW_FLAGS;		\
+									\
+	todc_info->year           = clock_type ##_YEAR;			\
+	todc_info->month          = clock_type ##_MONTH;		\
+	todc_info->day_of_month   = clock_type ##_DOM;			\
+	todc_info->day_of_week    = clock_type ##_DOW;			\
+	todc_info->hours          = clock_type ##_HOURS;		\
+	todc_info->minutes        = clock_type ##_MINUTES;		\
+	todc_info->seconds        = clock_type ##_SECONDS;		\
+	todc_info->control_b      = clock_type ##_CNTL_B;		\
+	todc_info->control_a      = clock_type ##_CNTL_A;		\
+	todc_info->watchdog       = clock_type ##_WATCHDOG;		\
+	todc_info->interrupts     = clock_type ##_INTERRUPTS;		\
+	todc_info->alarm_date     = clock_type ##_ALARM_DATE;		\
+	todc_info->alarm_hour     = clock_type ##_ALARM_HOUR;		\
+	todc_info->alarm_minutes  = clock_type ##_ALARM_MINUTES;	\
+	todc_info->alarm_seconds  = clock_type ##_ALARM_SECONDS;	\
+	todc_info->century        = clock_type ##_CENTURY;		\
+	todc_info->flags          = clock_type ##_FLAGS;		\
+									\
+	todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG;	\
+	todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG;	\
+}
+
+extern todc_info_t *todc_info;
+
+unsigned char todc_direct_read_val(int addr);
+void todc_direct_write_val(int addr, unsigned char val);
+unsigned char todc_m48txx_read_val(int addr);
+void todc_m48txx_write_val(int addr, unsigned char val);
+unsigned char todc_mc146818_read_val(int addr);
+void todc_mc146818_write_val(int addr, unsigned char val);
+
+long todc_time_init(void);
+unsigned long todc_get_rtc_time(void);
+int todc_set_rtc_time(unsigned long nowtime);
+void todc_calibrate_decr(void);
+
+#endif				/* __PPC_KERNEL_TODC_H */
diff --git a/include/asm-ppc/topology.h b/include/asm-ppc/topology.h
new file mode 100644
index 000000000000..6a029bbba6e1
--- /dev/null
+++ b/include/asm-ppc/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_PPC_TOPOLOGY_H
+#define _ASM_PPC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_PPC_TOPOLOGY_H */
diff --git a/include/asm-ppc/traps.h b/include/asm-ppc/traps.h
new file mode 100644
index 000000000000..68e7326b56f1
--- /dev/null
+++ b/include/asm-ppc/traps.h
@@ -0,0 +1 @@
+#include <asm-m68k/traps.h>
diff --git a/include/asm-ppc/types.h b/include/asm-ppc/types.h
new file mode 100644
index 000000000000..a787bc032587
--- /dev/null
+++ b/include/asm-ppc/types.h
@@ -0,0 +1,71 @@
+#ifndef _PPC_TYPES_H
+#define _PPC_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+typedef struct {
+	__u32 u[4];
+} __vector128;
+
+/*
+ * XXX allowed outside of __KERNEL__ for now, until glibc gets
+ * a proper set of asm headers of its own.  -- paulus
+ */
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+typedef __vector128 vector128;
+
+/* DMA addresses are 32-bits wide */
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h
new file mode 100644
index 000000000000..b044ae03ac56
--- /dev/null
+++ b/include/asm-ppc/uaccess.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _PPC_UACCESS_H
+#define _PPC_UACCESS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define KERNEL_DS	((mm_segment_t) { ~0UL })
+#define USER_DS		((mm_segment_t) { TASK_SIZE - 1 })
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __access_ok(addr,size)						    \
+	((addr) <= current->thread.fs.seg				    \
+	 && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr)))
+
+#define access_ok(type, addr, size) \
+	(__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size)))
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that 
+ * allow access of 64-bit data. The "get_user" functions do not 
+ * properly handle 64-bit data because the value gets down cast to a long. 
+ * The "put_user" functions already handle 64-bit data properly but we add 
+ * "user64" versions for completeness
+ */
+#define get_user(x,ptr) \
+  __get_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user64(x,ptr) \
+  __get_user64_check((x),(ptr),sizeof(*(ptr)))
+#define put_user(x,ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define put_user64(x,ptr) put_user(x,ptr)
+
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user64(x,ptr) \
+  __get_user64_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __put_user64(x,ptr) __put_user(x,ptr)
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x,ptr,size)			\
+({							\
+	long __pu_err;					\
+	__chk_user_ptr(ptr);				\
+	__put_user_size((x),(ptr),(size),__pu_err);	\
+	__pu_err;					\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))		\
+		__put_user_size((x),__pu_addr,(size),__pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "stb");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "sth");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "stw");	\
+		break;					\
+	case 8:						\
+		__put_user_asm2(x, ptr, retval);	\
+		break;					\
+	default:					\
+		__put_user_bad();			\
+	}						\
+} while (0)
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	"op" %1,0(%2)\n"			\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 2\n"				\
+		"	.long 1b,3b\n"				\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	stw %1,0(%2)\n"				\
+		"2:	stw %1+1,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	li %0,%3\n"				\
+		"	b 3b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 2\n"				\
+		"	.long 1b,4b\n"				\
+		"	.long 2b,4b\n"				\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user64_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	long long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	__get_user_size64(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long  __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user64_check(x, ptr, size)				  \
+({									  \
+	long __gu_err = -EFAULT;					  \
+	long long __gu_val = 0;						  \
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		  \
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			  \
+		__get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \
+	(x) = (__typeof__(*(ptr)))__gu_val;				  \
+	__gu_err;							  \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "lbz");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "lhz");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "lwz");		\
+		break;						\
+	default:						\
+		x = __get_user_bad();				\
+	}							\
+} while (0)
+
+#define __get_user_size64(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "lbz");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "lhz");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "lwz");		\
+		break;						\
+	case 8:							\
+		__get_user_asm2(x, ptr, retval);		\
+		break;						\
+	default:						\
+		x = __get_user_bad();				\
+	}							\
+} while (0)
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)\n"		\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,3b\n"			\
+		".previous"				\
+		: "=r"(err), "=r"(x)			\
+		: "b"(addr), "i"(-EFAULT), "0"(err))
+
+#define __get_user_asm2(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"1:	lwz %1,0(%2)\n"			\
+		"2:	lwz %1+1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	li %1+1,0\n"			\
+		"	b 3b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,4b\n"			\
+		"	.long 2b,4b\n"			\
+		".previous"				\
+		: "=r"(err), "=&r"(x)			\
+		: "b"(addr), "i"(-EFAULT), "0"(err))
+
+/* more complex routines */
+
+extern int __copy_tofrom_user(void __user *to, const void __user *from,
+			      unsigned long size);
+
+extern inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_tofrom_user((__force void __user *)to, from, n);
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + n - TASK_SIZE;
+		return __copy_tofrom_user((__force void __user *)to, from, n - over) + over;
+	}
+	return n;
+}
+
+extern inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_tofrom_user(to, (__force void __user *) from, n);
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + n - TASK_SIZE;
+		return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over;
+	}
+	return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	return __copy_tofrom_user((__force void __user *)to, from, size);
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	return __copy_tofrom_user(to, (__force void __user *)from, size);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+extern inline unsigned long
+clear_user(void __user *addr, unsigned long size)
+{
+	if (access_ok(VERIFY_WRITE, addr, size))
+		return __clear_user(addr, size);
+	if ((unsigned long)addr < TASK_SIZE) {
+		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+		return __clear_user(addr, size - over) + over;
+	}
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+extern inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (access_ok(VERIFY_READ, src, 1))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+extern __inline__ int strnlen_user(const char __user *str, long len)
+{
+	unsigned long top = current->thread.fs.seg;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len, top);
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+
+#endif	/* _PPC_UACCESS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ucontext.h b/include/asm-ppc/ucontext.h
new file mode 100644
index 000000000000..664bc984d51f
--- /dev/null
+++ b/include/asm-ppc/ucontext.h
@@ -0,0 +1,27 @@
+#ifndef _ASMPPC_UCONTEXT_H
+#define _ASMPPC_UCONTEXT_H
+
+#include <asm/elf.h>
+#include <asm/signal.h>
+
+struct mcontext {
+	elf_gregset_t	mc_gregs;
+	elf_fpregset_t	mc_fregs;
+	unsigned long	mc_pad[2];
+	elf_vrregset_t	mc_vregs __attribute__((__aligned__(16)));
+};
+
+struct ucontext {
+	unsigned long	 uc_flags;
+	struct ucontext __user *uc_link;
+	stack_t		 uc_stack;
+	int		 uc_pad[7];
+	struct mcontext	__user *uc_regs;/* points to uc_mcontext field */
+	sigset_t	 uc_sigmask;
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+	int		 uc_maskext[30];
+	int		 uc_pad2[3];
+	struct mcontext	 uc_mcontext;
+};
+
+#endif /* !_ASMPPC_UCONTEXT_H */
diff --git a/include/asm-ppc/unaligned.h b/include/asm-ppc/unaligned.h
new file mode 100644
index 000000000000..45520d9b85d1
--- /dev/null
+++ b/include/asm-ppc/unaligned.h
@@ -0,0 +1,18 @@
+#ifdef __KERNEL__
+#ifndef __PPC_UNALIGNED_H
+#define __PPC_UNALIGNED_H
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h
new file mode 100644
index 000000000000..f737732c3861
--- /dev/null
+++ b/include/asm-ppc/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ *             from Apple. This chip is used on "Core99" machines
+ *	       This also includes U2 used on more recent MacRISC2/3
+ *             machines and U3 (G5) 
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT		0x48
+#define UNI_N_ADDR_COARSE_MASK		0xffff0000	/* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK		0x0000ffff	/*  16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE		0x8c
+#define UNI_N_CFG_AGP_BASE		0x90
+#define UNI_N_CFG_GART_CTRL		0x94
+#define UNI_N_CFG_INTERNAL_STATUS	0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE	0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL		0x00000001
+#define UNI_N_CFG_GART_ENABLE		0x00000100
+#define UNI_N_CFG_GART_2xRESET		0x00010000
+#define UNI_N_CFG_GART_DISSBADET	0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE		0x00040000
+#define U3_N_CFG_GART_PERFRD		0x00080000
+#define U3_N_CFG_GART_B2BGNT		0x00200000
+#define U3_N_CFG_GART_FASTDDR		0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   UNI_N_CFG_GART_ENABLE
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ *   UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   0
+ *   UNI_N_CFG_GART_2xRESET
+ *   0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION			0x0000		/* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107		0x0003		/* 1.0.7 */
+#define UNI_N_VERSION_10A		0x0007		/* 1.0.10 */
+#define UNI_N_VERSION_150		0x0011		/* 1.5 */
+#define UNI_N_VERSION_200		0x0024		/* 2.0 */
+#define UNI_N_VERSION_PANGEA		0x00C0		/* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID		0x00D2		/* Integrated U2 + K */
+#define UNI_N_VERSION_300		0x0030		/* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL		0x0020
+#define UNI_N_CLOCK_CNTL_PCI		0x00000001	/* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC		0x00000002	/* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW		0x00000004	/* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100		0x00000010	/* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT			0x0030
+#define UNI_N_POWER_MGT_NORMAL		0x00
+#define UNI_N_POWER_MGT_IDLE2		0x01
+#define UNI_N_POWER_MGT_SLEEP		0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL			0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT	15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK	0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY	0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105	0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER		0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ *  to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE		0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING	0x01
+#define UNI_N_HWINIT_STATE_RUNNING	0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY		0x0100
+#define UNI_N_AACK_DELAY_ENABLE		0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0	0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP	0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL	0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49	0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18	0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49	0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18	0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER	0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18	0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32	0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32	0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0	0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1	0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2	0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO	0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0	0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0	0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1	0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2	0x00000008
+#define UNI_N_CLOCK_STOPPED_32		0x00000004
+#define UNI_N_CLOCK_STOPPED_45		0x00000002
+#define UNI_N_CLOCK_STOPPED_49		0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1	0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF	0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL	0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU		0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO	0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2	0x00008000
+#define UNI_N_CLOCK_STOPPED_FW		0x00004000
+#define UNI_N_CLOCK_STOPPED_GB		0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66	0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100	0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX		0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1	0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI	0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI	0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI	0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1	0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP		0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0	0x00000002
+#define UNI_N_CLOCK_STOPPED_18		0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING		0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG			0x00e0
+#define U3_PMC_START_STOP		0x0001
+#define U3_MPIC_RESET			0x0002
+#define U3_MPIC_OUTPUT_ENABLE		0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1		0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE      		0x70000
+#define U3_HT_LINK_COMMAND		0x100
+#define U3_HT_LINK_CONFIG		0x110
+#define U3_HT_LINK_FREQ			0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h
new file mode 100644
index 000000000000..cc51e5c9acc2
--- /dev/null
+++ b/include/asm-ppc/unistd.h
@@ -0,0 +1,488 @@
+#ifndef _ASM_PPC_UNISTD_H_
+#define _ASM_PPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#define __NR_fcntl64		204
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#define __NR_sendfile64		226
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#define __NR_fadvise64_64	254
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+/* Number 258 is reserved for new sys_remap_file_pages */
+/* Number 259 is reserved for new sys_mbind */
+/* Number 260 is reserved for new sys_get_mempolicy */
+/* Number 261 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+
+#define __NR_syscalls		273
+
+#define __NR(n)	#n
+
+/* On powerpc a system call basically clobbers the same registers like a
+ * function call, with the exception of LR (which is needed for the
+ * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal
+ * an error return status).
+ */
+
+#define __syscall_nr(nr, type, name, args...)				\
+	unsigned long __sc_ret, __sc_err;				\
+	{								\
+		register unsigned long __sc_0  __asm__ ("r0");		\
+		register unsigned long __sc_3  __asm__ ("r3");		\
+		register unsigned long __sc_4  __asm__ ("r4");		\
+		register unsigned long __sc_5  __asm__ ("r5");		\
+		register unsigned long __sc_6  __asm__ ("r6");		\
+		register unsigned long __sc_7  __asm__ ("r7");		\
+		register unsigned long __sc_8  __asm__ ("r8");		\
+									\
+		__sc_loadargs_##nr(name, args);				\
+		__asm__ __volatile__					\
+			("sc           \n\t"				\
+			 "mfcr %0      "				\
+			: "=&r" (__sc_0),				\
+			  "=&r" (__sc_3),  "=&r" (__sc_4),		\
+			  "=&r" (__sc_5),  "=&r" (__sc_6),		\
+			  "=&r" (__sc_7),  "=&r" (__sc_8)		\
+			: __sc_asm_input_##nr				\
+			: "cr0", "ctr", "memory",			\
+			  "r9", "r10","r11", "r12");			\
+		__sc_ret = __sc_3;					\
+		__sc_err = __sc_0;					\
+	}								\
+	if (__sc_err & 0x10000000)					\
+	{								\
+		errno = __sc_ret;					\
+		__sc_ret = -1;						\
+	}								\
+	return (type) __sc_ret
+
+#define __sc_loadargs_0(name, dummy...)					\
+	__sc_0 = __NR_##name
+#define __sc_loadargs_1(name, arg1)					\
+	__sc_loadargs_0(name);						\
+	__sc_3 = (unsigned long) (arg1)
+#define __sc_loadargs_2(name, arg1, arg2)				\
+	__sc_loadargs_1(name, arg1);					\
+	__sc_4 = (unsigned long) (arg2)
+#define __sc_loadargs_3(name, arg1, arg2, arg3)				\
+	__sc_loadargs_2(name, arg1, arg2);				\
+	__sc_5 = (unsigned long) (arg3)
+#define __sc_loadargs_4(name, arg1, arg2, arg3, arg4)			\
+	__sc_loadargs_3(name, arg1, arg2, arg3);			\
+	__sc_6 = (unsigned long) (arg4)
+#define __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5)		\
+	__sc_loadargs_4(name, arg1, arg2, arg3, arg4);			\
+	__sc_7 = (unsigned long) (arg5)
+#define __sc_loadargs_6(name, arg1, arg2, arg3, arg4, arg5, arg6)	\
+	__sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5);		\
+	__sc_8 = (unsigned long) (arg6)
+
+#define __sc_asm_input_0 "0" (__sc_0)
+#define __sc_asm_input_1 __sc_asm_input_0, "1" (__sc_3)
+#define __sc_asm_input_2 __sc_asm_input_1, "2" (__sc_4)
+#define __sc_asm_input_3 __sc_asm_input_2, "3" (__sc_5)
+#define __sc_asm_input_4 __sc_asm_input_3, "4" (__sc_6)
+#define __sc_asm_input_5 __sc_asm_input_4, "5" (__sc_7)
+#define __sc_asm_input_6 __sc_asm_input_5, "6" (__sc_8)
+
+#define _syscall0(type,name)						\
+type name(void)								\
+{									\
+	__syscall_nr(0, type, name);					\
+}
+
+#define _syscall1(type,name,type1,arg1)					\
+type name(type1 arg1)							\
+{									\
+	__syscall_nr(1, type, name, arg1);				\
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1, type2 arg2)					\
+{									\
+	__syscall_nr(2, type, name, arg1, arg2);			\
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1, type2 arg2, type3 arg3)				\
+{									\
+	__syscall_nr(3, type, name, arg1, arg2, arg3);			\
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4)		\
+{									\
+	__syscall_nr(4, type, name, arg1, arg2, arg3, arg4);		\
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5)	\
+{									\
+	__syscall_nr(5, type, name, arg1, arg2, arg3, arg4, arg5);	\
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
+{									\
+	__syscall_nr(6, type, name, arg1, arg2, arg3, arg4, arg5, arg6); \
+}
+
+#ifdef __KERNEL__
+
+#define __NR__exit __NR_exit
+#define NR_syscalls	__NR_syscalls
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * Forking from kernel space will result in the child getting a new,
+ * empty kernel stack area.  Thus the child cannot access automatic
+ * variables set in the parent unless they are in registers, and the
+ * procedure where the fork was done cannot return to its caller in
+ * the child.
+ */
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * System call prototypes.
+ */
+extern pid_t setsid(void);
+extern int write(int fd, const char *buf, off_t count);
+extern int read(int fd, char *buf, off_t count);
+extern off_t lseek(int fd, off_t offset, int count);
+extern int dup(int fd);
+extern int execve(const char *file, char **argv, char **envp);
+extern int open(const char *file, int flag, int mode);
+extern int close(int fd);
+extern pid_t waitpid(pid_t pid, int *wait_stat, int options);
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t offset);
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+struct pt_regs;
+int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+		unsigned long a3, unsigned long a4, unsigned long a5,
+		struct pt_regs *regs);
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+	      int __user *parent_tidp, void __user *child_threadptr,
+	      int __user *child_tidp, int p6,
+	      struct pt_regs *regs);
+int sys_fork(int p1, int p2, int p3, int p4, int p5, int p6,
+		struct pt_regs *regs);
+int sys_vfork(int p1, int p2, int p3, int p4, int p5, int p6,
+		struct pt_regs *regs);
+int sys_pipe(int __user *fildes);
+int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+long sys_rt_sigaction(int sig,
+		      const struct sigaction __user *act,
+		      struct sigaction __user *oact,
+		      size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PPC_UNISTD_H_ */
diff --git a/include/asm-ppc/user.h b/include/asm-ppc/user.h
new file mode 100644
index 000000000000..d662b2151370
--- /dev/null
+++ b/include/asm-ppc/user.h
@@ -0,0 +1,54 @@
+#ifdef __KERNEL__
+#ifndef _PPC_USER_H
+#define _PPC_USER_H
+
+/* Adapted from <asm-alpha/user.h> */
+
+#include <linux/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _PPC_USER_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/vga.h b/include/asm-ppc/vga.h
new file mode 100644
index 000000000000..c5864734e3e1
--- /dev/null
+++ b/include/asm-ppc/vga.h
@@ -0,0 +1,46 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifdef __KERNEL__
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/io.h>
+
+#include <linux/config.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+extern inline void scr_writew(u16 val, volatile u16 *addr)
+{
+    st_le16(addr, val);
+}
+
+extern inline u16 scr_readw(volatile const u16 *addr)
+{
+    return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw	memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+#define VGA_MAP_MEM(x) (x + vgacon_remap_base)
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/xmon.h b/include/asm-ppc/xmon.h
new file mode 100644
index 000000000000..042b83e6680d
--- /dev/null
+++ b/include/asm-ppc/xmon.h
@@ -0,0 +1,17 @@
+#ifndef __PPC_XMON_H
+#define __PPC_XMON_H
+#ifdef __KERNEL__
+
+struct pt_regs;
+
+extern void xmon(struct pt_regs *excp);
+extern void xmon_printf(const char *fmt, ...);
+extern void xmon_map_scc(void);
+extern int xmon_bpt(struct pt_regs *regs);
+extern int xmon_sstep(struct pt_regs *regs);
+extern int xmon_iabr_match(struct pt_regs *regs);
+extern int xmon_dabr_match(struct pt_regs *regs);
+extern void (*xmon_fault_handler)(struct pt_regs *regs);
+
+#endif
+#endif
diff --git a/include/asm-ppc/xor.h b/include/asm-ppc/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-ppc/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-ppc/xparameters.h b/include/asm-ppc/xparameters.h
new file mode 100644
index 000000000000..fe4eac629139
--- /dev/null
+++ b/include/asm-ppc/xparameters.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-ppc/xparameters.h
+ *
+ * This file includes the correct xparameters.h for the CONFIG'ed board
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
+ * of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_XILINX_ML300)
+#include <platforms/4xx/xparameters/xparameters_ml300.h>
+#endif
diff --git a/include/asm-ppc/zorro.h b/include/asm-ppc/zorro.h
new file mode 100644
index 000000000000..1e5fbc65e77b
--- /dev/null
+++ b/include/asm-ppc/zorro.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_PPC_ZORRO_H
+#define _ASM_PPC_ZORRO_H
+
+#include <asm/io.h>
+
+#define z_readb in_8
+#define z_readw in_be16
+#define z_readl in_be32
+
+#define z_writeb(val, port) out_8((port), (val))
+#define z_writew(val, port) out_be16((port), (val))
+#define z_writel(val, port) out_be32((port), (val))
+
+#define z_memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define z_memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define z_memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+extern void *__ioremap(unsigned long address, unsigned long size,
+		       unsigned long flags);
+
+extern void *ioremap(unsigned long address, unsigned long size);
+extern void iounmap(void *addr);
+
+extern void *__ioremap(unsigned long address, unsigned long size,
+                       unsigned long flags);
+
+#define z_ioremap ioremap
+#define z_iounmap iounmap
+
+#endif /* _ASM_PPC_ZORRO_H */
diff --git a/include/asm-ppc64/8253pit.h b/include/asm-ppc64/8253pit.h
new file mode 100644
index 000000000000..285f78488ccb
--- /dev/null
+++ b/include/asm-ppc64/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193182UL
+
+#endif
diff --git a/include/asm-ppc64/a.out.h b/include/asm-ppc64/a.out.h
new file mode 100644
index 000000000000..802338efcb19
--- /dev/null
+++ b/include/asm-ppc64/a.out.h
@@ -0,0 +1,41 @@
+#ifndef __PPC64_A_OUT_H__
+#define __PPC64_A_OUT_H__
+
+#include <asm/ppcdebug.h>
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP_USER64 TASK_SIZE_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+		   STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC64_A_OUT_H__ */
diff --git a/include/asm-ppc64/abs_addr.h b/include/asm-ppc64/abs_addr.h
new file mode 100644
index 000000000000..6d4e8e787058
--- /dev/null
+++ b/include/asm-ppc64/abs_addr.h
@@ -0,0 +1,108 @@
+#ifndef _ABS_ADDR_H
+#define _ABS_ADDR_H
+
+#include <linux/config.h>
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+
+typedef u32 msChunks_entry;
+struct msChunks {
+        unsigned long num_chunks;
+        unsigned long chunk_size;
+        unsigned long chunk_shift;
+        unsigned long chunk_mask;
+        msChunks_entry *abs;
+};
+
+extern struct msChunks msChunks;
+
+extern unsigned long msChunks_alloc(unsigned long, unsigned long, unsigned long);
+extern unsigned long reloc_offset(void);
+
+#ifdef CONFIG_MSCHUNKS
+
+static inline unsigned long
+chunk_to_addr(unsigned long chunk)
+{
+	unsigned long offset = reloc_offset();
+	struct msChunks *_msChunks = PTRRELOC(&msChunks);
+
+	return chunk << _msChunks->chunk_shift;
+}
+
+static inline unsigned long
+addr_to_chunk(unsigned long addr)
+{
+	unsigned long offset = reloc_offset();
+	struct msChunks *_msChunks = PTRRELOC(&msChunks);
+
+	return addr >> _msChunks->chunk_shift;
+}
+
+static inline unsigned long
+chunk_offset(unsigned long addr)
+{
+	unsigned long offset = reloc_offset();
+	struct msChunks *_msChunks = PTRRELOC(&msChunks);
+
+	return addr & _msChunks->chunk_mask;
+}
+
+static inline unsigned long
+abs_chunk(unsigned long pchunk)
+{
+	unsigned long offset = reloc_offset();
+	struct msChunks *_msChunks = PTRRELOC(&msChunks);
+	if ( pchunk >= _msChunks->num_chunks ) {
+		return pchunk;
+	}
+	return PTRRELOC(_msChunks->abs)[pchunk];
+}
+
+/* A macro so it can take pointers or unsigned long. */
+#define phys_to_abs(pa)						     \
+	({ unsigned long _pa = (unsigned long)(pa);			     \
+	   chunk_to_addr(abs_chunk(addr_to_chunk(_pa))) + chunk_offset(_pa); \
+	})
+
+static inline unsigned long
+physRpn_to_absRpn(unsigned long rpn)
+{
+	unsigned long pa = rpn << PAGE_SHIFT;
+	unsigned long aa = phys_to_abs(pa);
+	return (aa >> PAGE_SHIFT);
+}
+
+/* A macro so it can take pointers or unsigned long. */
+#define abs_to_phys(aa) lmb_abs_to_phys((unsigned long)(aa))
+
+#else  /* !CONFIG_MSCHUNKS */
+
+#define chunk_to_addr(chunk) ((unsigned long)(chunk))
+#define addr_to_chunk(addr) (addr)
+#define chunk_offset(addr) (0)
+#define abs_chunk(pchunk) (pchunk)
+
+#define phys_to_abs(pa) (pa)
+#define physRpn_to_absRpn(rpn) (rpn)
+#define abs_to_phys(aa) (aa)
+
+#endif /* !CONFIG_MSCHUNKS */
+
+/* Convenience macros */
+#define virt_to_abs(va) phys_to_abs(__pa(va))
+#define abs_to_virt(aa) __va(abs_to_phys(aa))
+
+#endif /* _ABS_ADDR_H */
diff --git a/include/asm-ppc64/agp.h b/include/asm-ppc64/agp.h
new file mode 100644
index 000000000000..be27cfa8c5b0
--- /dev/null
+++ b/include/asm-ppc64/agp.h
@@ -0,0 +1,13 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/io.h>
+
+/* nothing much needed here */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_mappings()
+#define flush_agp_cache() mb()
+
+#endif
diff --git a/include/asm-ppc64/atomic.h b/include/asm-ppc64/atomic.h
new file mode 100644
index 000000000000..0e5f25e83bc0
--- /dev/null
+++ b/include/asm-ppc64/atomic.h
@@ -0,0 +1,197 @@
+/*
+ * PowerPC64 atomic operations
+ *
+ * Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PPC64_ATOMIC_H_ 
+#define _ASM_PPC64_ATOMIC_H_
+
+#include <asm/memory.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_add\n\
+	add	%0,%2,%0\n\
+	stwcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_add_return\n\
+	add	%0,%1,%0\n\
+	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_sub\n\
+	subf	%0,%2,%0\n\
+	stwcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
+	subf	%0,%1,%0\n\
+	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_inc\n\
+	addic	%0,%0,1\n\
+	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
+	addic	%0,%0,1\n\
+	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_dec\n\
+	addic	%0,%0,-1\n\
+	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "=m" (v->counter)
+	: "r" (&v->counter), "m" (v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
+	addic	%0,%0,-1\n\
+	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
+	addic.	%0,%0,-1\n\
+	blt-	2f\n\
+	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define smp_mb__before_atomic_dec()     smp_mb()
+#define smp_mb__after_atomic_dec()      smp_mb()
+#define smp_mb__before_atomic_inc()     smp_mb()
+#define smp_mb__after_atomic_inc()      smp_mb()
+
+#endif /* _ASM_PPC64_ATOMIC_H_ */
diff --git a/include/asm-ppc64/bitops.h b/include/asm-ppc64/bitops.h
new file mode 100644
index 000000000000..a0f831224f96
--- /dev/null
+++ b/include/asm-ppc64/bitops.h
@@ -0,0 +1,360 @@
+/*
+ * PowerPC64 atomic bit operations.
+ * Dave Engebretsen, Todd Inglett, Don Reed, Pat McCarthy, Peter Bergner,
+ * Anton Blanchard
+ *
+ * Originally taken from the 32b PPC code.  Modified to use 64b values for
+ * the various counters & memory references.
+ *
+ * Bitops are odd when viewed on big-endian systems.  They were designed
+ * on little endian so the size of the bitset doesn't matter (low order bytes
+ * come first) as long as the bit in question is valid.
+ *
+ * Bits are "tested" often using the C expression (val & (1<<nr)) so we do
+ * our best to stay compatible with that.  The assumption is that val will
+ * be unsigned long for such tests.  As such, we assume the bits are stored
+ * as an array of unsigned long (the usual case is a single unsigned long,
+ * of course).  Here's an example bitset with bit numbering:
+ *
+ *   |63..........0|127........64|195.......128|255.......196|
+ *
+ * This leads to a problem. If an int, short or char is passed as a bitset
+ * it will be a bad memory reference since we want to store in chunks
+ * of unsigned long (64 bits here) size.
+ *
+ * There are a few little-endian macros used mostly for filesystem bitmaps,
+ * these work on similar bit arrays layouts, but byte-oriented:
+ *
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 in the bit number field needs to be
+ * reversed compared to the big-endian bit fields. This can be achieved
+ * by XOR with 0b111000 (0x38).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_BITOPS_H
+#define _PPC64_BITOPS_H
+
+#ifdef __KERNEL__
+
+#include <asm/memory.h>
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+static __inline__ int test_bit(unsigned long nr, __const__ volatile unsigned long *addr)
+{
+	return (1UL & (addr[nr >> 6] >> (nr & 63)));
+}
+
+static __inline__ void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# set_bit\n\
+	or	%0,%0,%2\n\
+	stdcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+static __inline__ void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# clear_bit\n\
+	andc	%0,%0,%2\n\
+	stdcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+static __inline__ void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# change_bit\n\
+	xor	%0,%0,%2\n\
+	stdcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*p)
+	: "r" (mask), "r" (p), "m" (*p)
+	: "cc");
+}
+
+static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	ldarx	%0,0,%3		# test_and_set_bit\n\
+	or	%1,%0,%2 \n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	ldarx	%0,0,%3		# test_and_clear_bit\n\
+	andc	%1,%0,%2\n\
+	stdcx.	%1,0,%3\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	ldarx	%0,0,%3		# test_and_change_bit\n\
+	xor	%1,%0,%2\n\
+	stdcx.	%1,0,%3\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
+{
+	unsigned long old;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# set_bit\n\
+	or	%0,%0,%2\n\
+	stdcx.	%0,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=m" (*addr)
+	: "r" (mask), "r" (addr), "m" (*addr)
+	: "cc");
+}
+
+/*
+ * non-atomic versions
+ */
+static __inline__ void __set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	*p |= mask;
+}
+
+static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	*p &= ~mask;
+}
+
+static __inline__ void __change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+
+	*p ^= mask;
+}
+
+static __inline__ int __test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+static __inline__ int __test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static __inline__ int __test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x3f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 6);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/*
+ * Return the zero-based bit position (from RIGHT TO LEFT, 63 -> 0) of the
+ * most significant (left-most) 1-bit in a double word.
+ */
+static __inline__ int __ilog2(unsigned long x)
+{
+	int lz;
+
+	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+	return 63 - lz;
+}
+
+/*
+ * Determines the bit position of the least significant (rightmost) 0 bit
+ * in the specified double word. The returned bit position will be zero-based,
+ * starting from the right side (63 - 0).
+ */
+static __inline__ unsigned long ffz(unsigned long x)
+{
+	/* no zero exists anywhere in the 8 byte area. */
+	if ((x = ~x) == 0)
+		return 64;
+
+	/*
+	 * Calculate the bit position of the least signficant '1' bit in x
+	 * (since x has been changed this will actually be the least signficant
+	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
+	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
+	 */
+	return __ilog2(x & -x);
+}
+
+static __inline__ int __ffs(unsigned long x)
+{
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	unsigned long i = (unsigned long)x;
+	return __ilog2(i & -i) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+#define fls(x) generic_fls(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight64(x) generic_hweight64(x)
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+extern unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+extern unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+extern unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
+#define find_first_zero_le_bit(addr, size) \
+	find_next_zero_le_bit((addr), (size), 0)
+
+static __inline__ int test_le_bit(unsigned long nr, __const__ unsigned long * addr)
+{
+	__const__ unsigned char	*ADDR = (__const__ unsigned char *) addr;
+	return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+#define test_and_clear_le_bit(nr, addr) \
+	test_and_clear_bit((nr) ^ 0x38, (addr))
+#define test_and_set_le_bit(nr, addr) \
+	test_and_set_bit((nr) ^ 0x38, (addr))
+
+/*
+ * non-atomic versions
+ */
+
+#define __set_le_bit(nr, addr) \
+	__set_bit((nr) ^ 0x38, (addr))
+#define __clear_le_bit(nr, addr) \
+	__clear_bit((nr) ^ 0x38, (addr))
+#define __test_and_clear_le_bit(nr, addr) \
+	__test_and_clear_bit((nr) ^ 0x38, (addr))
+#define __test_and_set_le_bit(nr, addr) \
+	__test_and_set_bit((nr) ^ 0x38, (addr))
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+	test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+	test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+
+#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_le_bit((unsigned long*)addr, size, off)
+
+#define minix_test_and_set_bit(nr,addr)		test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)			set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr)			test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_BITOPS_H */
diff --git a/include/asm-ppc64/bootinfo.h b/include/asm-ppc64/bootinfo.h
new file mode 100644
index 000000000000..f55e7cb48f46
--- /dev/null
+++ b/include/asm-ppc64/bootinfo.h
@@ -0,0 +1,70 @@
+/*
+ * Non-machine dependent bootinfo structure.  Basic idea
+ * borrowed from the m68k.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org>
+ * Copyright (c) 2001 PPC64 Team, IBM Corp 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#ifndef _PPC64_BOOTINFO_H
+#define _PPC64_BOOTINFO_H
+
+#include <asm/types.h>
+
+/* We use a u32 for the type of the fields since they're written by
+ * the bootloader which is a 32-bit process and read by the kernel
+ * which is a 64-bit process.  This way they can both agree on the
+ * size of the type.
+ */
+typedef u32 bi_rec_field;
+
+struct bi_record {
+	bi_rec_field tag;	/* tag ID */
+	bi_rec_field size;	/* size of record (in bytes) */
+	bi_rec_field data[0];	/* data */
+};
+
+#define BI_FIRST		0x1010  /* first record - marker */
+#define BI_LAST			0x1011	/* last record - marker */
+#define BI_CMD_LINE		0x1012
+#define BI_BOOTLOADER_ID	0x1013
+#define BI_INITRD		0x1014
+#define BI_SYSMAP		0x1015
+#define BI_MACHTYPE		0x1016
+
+static __inline__ struct bi_record * bi_rec_init(unsigned long addr)
+{
+	struct bi_record *bi_recs;
+	bi_recs = (struct bi_record *)_ALIGN(addr, PAGE_SIZE);
+	bi_recs->size = 0;
+	return bi_recs;
+}
+
+static __inline__ struct bi_record * bi_rec_alloc(struct bi_record *rec,
+						  unsigned long args)
+{
+	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+	rec->size = sizeof(struct bi_record) + args*sizeof(bi_rec_field);
+	return rec;
+}
+
+static __inline__ struct bi_record * bi_rec_alloc_bytes(struct bi_record *rec,
+							unsigned long bytes)
+{
+	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+	rec->size = sizeof(struct bi_record) + bytes;
+	return rec;
+}
+
+static __inline__ struct bi_record * bi_rec_next(struct bi_record *rec)
+{
+	return (struct bi_record *)((unsigned long)rec + rec->size);
+}
+
+#endif /* _PPC64_BOOTINFO_H */
diff --git a/include/asm-ppc64/btext.h b/include/asm-ppc64/btext.h
new file mode 100644
index 000000000000..67aef0cc72c0
--- /dev/null
+++ b/include/asm-ppc64/btext.h
@@ -0,0 +1,26 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+
+extern int boot_text_mapped;
+
+extern int btext_initialize(struct device_node *np);
+
+extern void map_boot_text(void);
+extern void btext_update_display(unsigned long phys, int width, int height,
+				 int depth, int pitch);
+
+extern void btext_drawchar(char c);
+extern void btext_drawstring(const char *str);
+extern void btext_drawhex(unsigned long v);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc64/bug.h b/include/asm-ppc64/bug.h
new file mode 100644
index 000000000000..db31dd22233c
--- /dev/null
+++ b/include/asm-ppc64/bug.h
@@ -0,0 +1,65 @@
+#ifndef _PPC64_BUG_H
+#define _PPC64_BUG_H
+
+/*
+ * Define an illegal instr to trap on the bug.
+ * We don't use 0 because that marks the end of a function
+ * in the ELF ABI.  That's "Boo Boo" in case you wonder...
+ */
+#define BUG_OPCODE .long 0x00b00b00  /* For asm */
+#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
+
+#ifndef __ASSEMBLY__
+
+struct bug_entry {
+	unsigned long	bug_addr;
+	long		line;
+	const char	*file;
+	const char	*function;
+};
+
+struct bug_entry *find_bug(unsigned long bugaddr);
+
+/*
+ * If this bit is set in the line number it means that the trap
+ * is for WARN_ON rather than BUG or BUG_ON.
+ */
+#define BUG_WARNING_TRAP	0x1000000
+
+#define BUG() do {							 \
+	__asm__ __volatile__(						 \
+		"1:	twi 31,0,0\n"					 \
+		".section __bug_table,\"a\"\n\t"			 \
+		"	.llong 1b,%0,%1,%2\n"				 \
+		".previous"						 \
+		: : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+} while (0)
+
+#define BUG_ON(x) do {						\
+	__asm__ __volatile__(					\
+		"1:	tdnei %0,0\n"				\
+		".section __bug_table,\"a\"\n\t"		\
+		"	.llong 1b,%1,%2,%3\n"			\
+		".previous"					\
+		: : "r" (x), "i" (__LINE__), "i" (__FILE__),	\
+		    "i" (__FUNCTION__));			\
+} while (0)
+
+#define WARN_ON(x) do {						\
+	__asm__ __volatile__(					\
+		"1:	tdnei %0,0\n"				\
+		".section __bug_table,\"a\"\n\t"		\
+		"	.llong 1b,%1,%2,%3\n"			\
+		".previous"					\
+		: : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP),	\
+		    "i" (__FILE__), "i" (__FUNCTION__));	\
+} while (0)
+
+#endif
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ppc64/bugs.h b/include/asm-ppc64/bugs.h
new file mode 100644
index 000000000000..861074b3cf71
--- /dev/null
+++ b/include/asm-ppc64/bugs.h
@@ -0,0 +1,12 @@
+/*
+ * This file is included by 'init/main.c' to check for architecture-dependent
+ * bugs.
+ *
+ */
+#ifndef _ASM_PPC64_BUGS_H
+#define _ASM_PPC64_BUGS_H
+
+static void check_bugs(void) {
+}
+
+#endif /* _ASM_PPC64_BUGS_H */
diff --git a/include/asm-ppc64/byteorder.h b/include/asm-ppc64/byteorder.h
new file mode 100644
index 000000000000..80327532de64
--- /dev/null
+++ b/include/asm-ppc64/byteorder.h
@@ -0,0 +1,96 @@
+#ifndef _PPC64_BYTEORDER_H
+#define _PPC64_BYTEORDER_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+static __inline__ __u16 ld_le16(const volatile __u16 *addr)
+{
+	__u16 val;
+
+	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
+{
+	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __u32 ld_le32(const volatile __u32 *addr)
+{
+	__u32 val;
+
+	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
+{
+	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+#if 0
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+	__u16 result;
+
+	__asm__("rlwimi %0,%1,8,16,23"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 8));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+	__u32 result;
+
+	__asm__("rlwimi %0,%1,24,16,23\n\t"
+	    "rlwimi %0,%1,8,8,15\n\t"
+	    "rlwimi %0,%1,24,0,7"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 24));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 value)
+{
+	__u64 result;
+#error implement me
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab64(x) ___arch__swab64(x)
+
+#endif
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#ifndef __STRICT_ANSI__
+#define __BYTEORDER_HAS_U64__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PPC64_BYTEORDER_H */
diff --git a/include/asm-ppc64/cache.h b/include/asm-ppc64/cache.h
new file mode 100644
index 000000000000..92140a7efbd1
--- /dev/null
+++ b/include/asm-ppc64/cache.h
@@ -0,0 +1,36 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ARCH_PPC64_CACHE_H
+#define __ARCH_PPC64_CACHE_H
+
+#include <asm/types.h>
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT	7
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#ifndef __ASSEMBLY__
+
+struct ppc64_caches {
+	u32	dsize;			/* L1 d-cache size */
+	u32	dline_size;		/* L1 d-cache line size	*/
+	u32	log_dline_size;
+	u32	dlines_per_page;
+	u32	isize;			/* L1 i-cache size */
+	u32	iline_size;		/* L1 i-cache line size	*/
+	u32	log_iline_size;
+	u32	ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+
+#endif
+
+#endif
diff --git a/include/asm-ppc64/cacheflush.h b/include/asm-ppc64/cacheflush.h
new file mode 100644
index 000000000000..ffbc08be8e52
--- /dev/null
+++ b/include/asm-ppc64/cacheflush.h
@@ -0,0 +1,48 @@
+#ifndef _PPC64_CACHEFLUSH_H
+#define _PPC64_CACHEFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are
+ * changed, because the caches on PowerPCs are physically
+ * addressed.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+extern void __flush_dcache_icache(void *page_va);
+
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		__flush_icache_range(start, stop);
+}
+
+#endif /* _PPC64_CACHEFLUSH_H */
diff --git a/include/asm-ppc64/checksum.h b/include/asm-ppc64/checksum.h
new file mode 100644
index 000000000000..d22d4469de43
--- /dev/null
+++ b/include/asm-ppc64/checksum.h
@@ -0,0 +1,107 @@
+#ifndef _PPC64_CHECKSUM_H
+#define _PPC64_CHECKSUM_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern unsigned short csum_tcpudp_magic(unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					unsigned int sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len,
+				 unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src to dst while it
+ * checksums
+ */
+extern unsigned int csum_partial_copy_generic(const char *src, char *dst,
+					      int len, unsigned int sum,
+					      int *src_err, int *dst_err);
+/*
+ * the same as csum_partial, but copies from src to dst while it
+ * checksums.
+ */
+
+unsigned int csum_partial_copy_nocheck(const char *src, 
+				       char *dst, 
+				       int len, 
+				       unsigned int sum);
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int tmp;
+
+	/* swap the two 16-bit halves of sum */
+	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+	/* if there is a carry from adding the two 16-bit halves,
+	   it will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	sum = ~(sum + tmp) >> 16;
+	return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
+        csum_partial_copy_generic((src), (dst), (len), (sum), (errp), NULL)
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)   \
+        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+static inline u32 csum_tcpudp_nofold(u32 saddr,
+                                     u32 daddr,
+                                     unsigned short len,
+                                     unsigned short proto,
+                                     unsigned int sum)
+{
+	unsigned long s = sum;
+
+	s += saddr;
+	s += daddr;
+	s += (proto << 16) + len;
+	s += (s >> 32);
+	return (u32) s;
+}
+
+#endif
diff --git a/include/asm-ppc64/compat.h b/include/asm-ppc64/compat.h
new file mode 100644
index 000000000000..09c28d28ce6c
--- /dev/null
+++ b/include/asm-ppc64/compat.h
@@ -0,0 +1,202 @@
+#ifndef _ASM_PPC64_COMPAT_H
+#define _ASM_PPC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u32		compat_uid_t;
+typedef u32		compat_gid_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;	
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	compat_time_t	st_atime;
+	u32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	u32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current->thread.regs;
+	unsigned long usp = regs->gpr[1];
+
+	/*
+	 * We cant access below the stack pointer in the 32bit ABI and
+	 * can access 288 bytes in the 64bit ABI
+	 */
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp -= 288;
+
+	return (void __user *) (usp - len);
+}
+
+/*
+ * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
+ * it we may as well define it.
+ */
+struct compat_ipc64_perm {
+	compat_key_t key;
+	compat_uid_t uid;
+	compat_gid_t gid;
+	compat_uid_t cuid;
+	compat_gid_t cgid;
+	compat_mode_t mode;
+	unsigned int seq;
+	unsigned int __pad2;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int __unused1;
+	compat_time_t sem_otime;
+	unsigned int __unused2;
+	compat_time_t sem_ctime;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int __unused1;
+	compat_time_t msg_stime;
+	unsigned int __unused2;
+	compat_time_t msg_rtime;
+	unsigned int __unused3;
+	compat_time_t msg_ctime;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t msg_lspid;
+	compat_pid_t msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int __unused1;
+	compat_time_t shm_atime;
+	unsigned int __unused2;
+	compat_time_t shm_dtime;
+	unsigned int __unused3;
+	compat_time_t shm_ctime;
+	unsigned int __unused4;
+	compat_size_t shm_segsz;
+	compat_pid_t shm_cpid;
+	compat_pid_t shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused5;
+	compat_ulong_t __unused6;
+};
+
+#endif /* _ASM_PPC64_COMPAT_H */
diff --git a/include/asm-ppc64/cputable.h b/include/asm-ppc64/cputable.h
new file mode 100644
index 000000000000..cbbfbec78b6b
--- /dev/null
+++ b/include/asm-ppc64/cputable.h
@@ -0,0 +1,197 @@
+/*
+ *  include/asm-ppc64/cputable.h
+ *
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ * 
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_CPUTABLE_H
+#define __ASM_PPC_CPUTABLE_H
+
+#include <linux/config.h>
+#include <asm/page.h> /* for ASM_CONST */
+
+/* Exposed to userland CPU features - Must match ppc32 definitions */
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mechanism.
+ */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
+
+struct cpu_spec {
+	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
+	unsigned int	pvr_mask;
+	unsigned int	pvr_value;
+
+	char		*cpu_name;
+	unsigned long	cpu_features;		/* Kernel features */
+	unsigned int	cpu_user_features;	/* Userland features */
+
+	/* cache line sizes */
+	unsigned int	icache_bsize;
+	unsigned int	dcache_bsize;
+
+	/* this is called to initialize various CPU bits like L1 cache,
+	 * BHT, SPD, etc... from head.S before branching to identify_machine
+	 */
+	cpu_setup_t	cpu_setup;
+
+	/* This is used to identify firmware features which are available
+	 * to the kernel.
+	 */
+	unsigned long   firmware_features;
+};
+
+extern struct cpu_spec		cpu_specs[];
+extern struct cpu_spec		*cur_cpu_spec;
+
+static inline unsigned long cpu_has_feature(unsigned long feature)
+{
+	return cur_cpu_spec->cpu_features & feature;
+}
+
+
+/* firmware feature bitmask values */
+#define FIRMWARE_MAX_FEATURES 63
+
+#define FW_FEATURE_PFT		(1UL<<0)
+#define FW_FEATURE_TCE		(1UL<<1)	
+#define FW_FEATURE_SPRG0	(1UL<<2)	
+#define FW_FEATURE_DABR		(1UL<<3)	
+#define FW_FEATURE_COPY		(1UL<<4)	
+#define FW_FEATURE_ASR		(1UL<<5)	
+#define FW_FEATURE_DEBUG	(1UL<<6)	
+#define FW_FEATURE_TERM		(1UL<<7)	
+#define FW_FEATURE_PERF		(1UL<<8)	
+#define FW_FEATURE_DUMP		(1UL<<9)	
+#define FW_FEATURE_INTERRUPT	(1UL<<10)	
+#define FW_FEATURE_MIGRATE	(1UL<<11)	
+#define FW_FEATURE_PERFMON	(1UL<<12)	
+#define FW_FEATURE_CRQ   	(1UL<<13)	
+#define FW_FEATURE_VIO   	(1UL<<14)	
+#define FW_FEATURE_RDMA   	(1UL<<15)	
+#define FW_FEATURE_LLAN   	(1UL<<16)	
+#define FW_FEATURE_BULK   	(1UL<<17)	
+#define FW_FEATURE_XDABR   	(1UL<<18)	
+#define FW_FEATURE_MULTITCE   	(1UL<<19)	
+#define FW_FEATURE_SPLPAR   	(1UL<<20)	
+
+typedef struct {
+    unsigned long val;
+    char * name;
+} firmware_feature_t;
+
+extern firmware_feature_t firmware_features_table[];
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+
+/* Retain the 32b definitions for the time being - use bottom half of word */
+#define CPU_FTR_SPLIT_ID_CACHE		ASM_CONST(0x0000000000000001)
+#define CPU_FTR_L2CR			ASM_CONST(0x0000000000000002)
+#define CPU_FTR_SPEC7450		ASM_CONST(0x0000000000000004)
+#define CPU_FTR_ALTIVEC			ASM_CONST(0x0000000000000008)
+#define CPU_FTR_TAU			ASM_CONST(0x0000000000000010)
+#define CPU_FTR_CAN_DOZE		ASM_CONST(0x0000000000000020)
+#define CPU_FTR_USE_TB			ASM_CONST(0x0000000000000040)
+#define CPU_FTR_604_PERF_MON		ASM_CONST(0x0000000000000080)
+#define CPU_FTR_601			ASM_CONST(0x0000000000000100)
+#define CPU_FTR_HPTE_TABLE		ASM_CONST(0x0000000000000200)
+#define CPU_FTR_CAN_NAP			ASM_CONST(0x0000000000000400)
+#define CPU_FTR_L3CR			ASM_CONST(0x0000000000000800)
+#define CPU_FTR_L3_DISABLE_NAP		ASM_CONST(0x0000000000001000)
+#define CPU_FTR_NAP_DISABLE_L2_PR	ASM_CONST(0x0000000000002000)
+#define CPU_FTR_DUAL_PLL_750FX		ASM_CONST(0x0000000000004000)
+
+/* Add the 64b processor unique features in the top half of the word */
+#define CPU_FTR_SLB           		ASM_CONST(0x0000000100000000)
+#define CPU_FTR_16M_PAGE      		ASM_CONST(0x0000000200000000)
+#define CPU_FTR_TLBIEL         		ASM_CONST(0x0000000400000000)
+#define CPU_FTR_NOEXECUTE     		ASM_CONST(0x0000000800000000)
+#define CPU_FTR_NODSISRALIGN  		ASM_CONST(0x0000001000000000)
+#define CPU_FTR_IABR  			ASM_CONST(0x0000002000000000)
+#define CPU_FTR_MMCRA  			ASM_CONST(0x0000004000000000)
+#define CPU_FTR_PMC8  			ASM_CONST(0x0000008000000000)
+#define CPU_FTR_SMT  			ASM_CONST(0x0000010000000000)
+#define CPU_FTR_COHERENT_ICACHE  	ASM_CONST(0x0000020000000000)
+#define CPU_FTR_LOCKLESS_TLBIE		ASM_CONST(0x0000040000000000)
+#define CPU_FTR_MMCRA_SIHV		ASM_CONST(0x0000080000000000)
+
+/* Platform firmware features */
+#define FW_FTR_				ASM_CONST(0x0000000000000001)
+
+#ifndef __ASSEMBLY__
+#define COMMON_USER_PPC64	(PPC_FEATURE_32 | PPC_FEATURE_64 | \
+			         PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_MMU)
+
+#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \
+                                 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
+                                 CPU_FTR_NODSISRALIGN)
+
+/* iSeries doesn't support large pages */
+#ifdef CONFIG_PPC_ISERIES
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_PPCAS_ARCH_V2_BASE)
+#else
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_PPCAS_ARCH_V2_BASE | CPU_FTR_16M_PAGE)
+#endif
+
+#define COMMON_PPC64_FW	(0)
+#endif
+
+#ifdef __ASSEMBLY__
+
+#define BEGIN_FTR_SECTION		98:
+
+#define END_FTR_SECTION(msk, val)		\
+99:						\
+	.section __ftr_fixup,"a";		\
+	.align 3;				\
+	.llong msk;			        \
+	.llong val;			        \
+	.llong 98b;			        \
+	.llong 99b;	 		        \
+	.previous
+
+#else
+
+#define BEGIN_FTR_SECTION		"98:\n"
+#define END_FTR_SECTION(msk, val)		\
+"99:\n"						\
+"	.section __ftr_fixup,\"a\";\n"		\
+"	.align 3;\n"				\
+"	.llong "#msk";\n"			\
+"	.llong "#val";\n"			\
+"	.llong 98b;\n"			        \
+"	.llong 99b;\n"	 		        \
+"	.previous\n"
+
+#endif /* __ASSEMBLY__ */
+
+#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
+
+#endif /* __ASM_PPC_CPUTABLE_H */
+#endif /* __KERNEL__ */
+
diff --git a/include/asm-ppc64/cputime.h b/include/asm-ppc64/cputime.h
new file mode 100644
index 000000000000..8e9faf5ce720
--- /dev/null
+++ b/include/asm-ppc64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __PPC_CPUTIME_H
+#define __PPC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __PPC_CPUTIME_H */
diff --git a/include/asm-ppc64/current.h b/include/asm-ppc64/current.h
new file mode 100644
index 000000000000..52ddc60c8b65
--- /dev/null
+++ b/include/asm-ppc64/current.h
@@ -0,0 +1,16 @@
+#ifndef _PPC64_CURRENT_H
+#define _PPC64_CURRENT_H
+
+#include <asm/paca.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define get_current()   (get_paca()->__current)
+#define current         get_current()
+
+#endif /* !(_PPC64_CURRENT_H) */
diff --git a/include/asm-ppc64/dbdma.h b/include/asm-ppc64/dbdma.h
new file mode 100644
index 000000000000..f2d5d5dc3377
--- /dev/null
+++ b/include/asm-ppc64/dbdma.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/dbdma.h>
+
diff --git a/include/asm-ppc64/delay.h b/include/asm-ppc64/delay.h
new file mode 100644
index 000000000000..05f198cf73d9
--- /dev/null
+++ b/include/asm-ppc64/delay.h
@@ -0,0 +1,48 @@
+#ifndef _PPC64_DELAY_H
+#define _PPC64_DELAY_H
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
+ * Anton Blanchard.
+ */
+
+extern unsigned long tb_ticks_per_usec;
+
+/* define these here to prevent circular dependencies */ 
+#define __HMT_low()	asm volatile("or 1,1,1")
+#define __HMT_medium()	asm volatile("or 2,2,2")
+#define __barrier()	asm volatile("":::"memory")
+
+static inline unsigned long __get_tb(void)
+{
+	unsigned long rval;
+
+	asm volatile("mftb %0" : "=r" (rval));
+	return rval;
+}
+
+static inline void __delay(unsigned long loops)
+{
+	unsigned long start = __get_tb();
+
+	while((__get_tb()-start) < loops)
+		__HMT_low();
+	__HMT_medium();
+	__barrier();
+}
+
+static inline void udelay(unsigned long usecs)
+{
+	unsigned long loops = tb_ticks_per_usec * usecs;
+
+	__delay(loops);
+}
+
+#endif /* _PPC64_DELAY_H */
diff --git a/include/asm-ppc64/div64.h b/include/asm-ppc64/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-ppc64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ppc64/dma-mapping.h b/include/asm-ppc64/dma-mapping.h
new file mode 100644
index 000000000000..9ad8adee0067
--- /dev/null
+++ b/include/asm-ppc64/dma-mapping.h
@@ -0,0 +1,136 @@
+/* Copyright (C) 2004 IBM
+ *
+ * Implements the generic device dma API for ppc64. Handles
+ * the pci and vio busses
+ */
+
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/types.h>
+#include <linux/cache.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/bug.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, unsigned int __nocast flag);
+extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		dma_addr_t dma_handle);
+extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+		size_t size, enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+		size_t size, enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nhwentries, enum dma_data_direction direction);
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d)	(1)
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << L1_CACHE_SHIFT_MAX);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	/* nothing to do */
+}
+
+/*
+ * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
+ */
+struct dma_mapping_ops {
+	void *		(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, unsigned int __nocast flag);
+	void		(*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
+				size_t size, enum dma_data_direction direction);
+	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+				size_t size, enum dma_data_direction direction);
+	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction);
+	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction);
+	int		(*dma_supported)(struct device *dev, u64 mask);
+	int		(*dac_dma_supported)(struct device *dev, u64 mask);
+};
+
+#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-ppc64/dma.h b/include/asm-ppc64/dma.h
new file mode 100644
index 000000000000..d693b8026bc3
--- /dev/null
+++ b/include/asm-ppc64/dma.h
@@ -0,0 +1,326 @@
+/* 
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS  (~0UL)
+
+#define dma_outb	outb
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_LO_PAGE_0              0x87    /* DMA page registers */
+#define DMA_LO_PAGE_1              0x83
+#define DMA_LO_PAGE_2              0x81
+#define DMA_LO_PAGE_3              0x82
+#define DMA_LO_PAGE_5              0x8B
+#define DMA_LO_PAGE_6              0x89
+#define DMA_LO_PAGE_7              0x8A
+
+#define DMA_HI_PAGE_0              0x487    /* DMA page registers */
+#define DMA_HI_PAGE_1              0x483
+#define DMA_HI_PAGE_2              0x481
+#define DMA_HI_PAGE_3              0x482
+#define DMA_HI_PAGE_5              0x48B
+#define DMA_HI_PAGE_6              0x489
+#define DMA_HI_PAGE_7              0x48A
+
+#define DMA1_EXT_REG               0x40B
+#define DMA2_EXT_REG               0x4D6
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT   	 0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd=0x00;
+
+	if (dmanr != 4)
+	{
+		dma_outb(0, DMA2_MASK_REG);  /* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);  /* Enable group */
+	}
+	if (dmanr<=3)
+	{
+		dma_outb(dmanr,  DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);  /* Enable group */
+	} else
+	{
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+	}
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_LO_PAGE_0);
+                        dma_outb(pagenr>>8, DMA_HI_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_LO_PAGE_1);
+                        dma_outb(pagenr>>8, DMA_HI_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_LO_PAGE_2);
+			dma_outb(pagenr>>8, DMA_HI_PAGE_2); 
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_LO_PAGE_3);
+			dma_outb(pagenr>>8, DMA_HI_PAGE_3); 
+			break;
+	        case 5:
+		        dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+                        dma_outb(pagenr>>8, DMA_HI_PAGE_5);
+			break;
+		case 6:
+		        dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+			dma_outb(pagenr>>8, DMA_HI_PAGE_6);
+			break;
+		case 7:
+		        dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+			dma_outb(pagenr>>8, DMA_HI_PAGE_7);
+		  break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3)  {
+	    dma_outb( phys & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (phys>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (phys>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (phys>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+	set_dma_page(dmanr, phys>>16);
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr <= 3)? count : (count<<1);
+}
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;                                        
+#else                                                         
+#define isa_dma_bridge_buggy   (0)
+#endif
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-ppc64/eeh.h b/include/asm-ppc64/eeh.h
new file mode 100644
index 000000000000..94298b106a4b
--- /dev/null
+++ b/include/asm-ppc64/eeh.h
@@ -0,0 +1,383 @@
+/* 
+ * eeh.h
+ * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_EEH_H
+#define _PPC64_EEH_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/string.h>
+
+struct pci_dev;
+struct device_node;
+struct device_node;
+struct notifier_block;
+
+#ifdef CONFIG_EEH
+
+/* Values for eeh_mode bits in device_node */
+#define EEH_MODE_SUPPORTED	(1<<0)
+#define EEH_MODE_NOCHECK	(1<<1)
+#define EEH_MODE_ISOLATED	(1<<2)
+
+void __init eeh_init(void);
+unsigned long eeh_check_failure(const volatile void __iomem *token,
+				unsigned long val);
+int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
+void __init pci_addr_cache_build(void);
+
+/**
+ * eeh_add_device_early
+ * eeh_add_device_late
+ *
+ * Perform eeh initialization for devices added after boot.
+ * Call eeh_add_device_early before doing any i/o to the
+ * device (including config space i/o).  Call eeh_add_device_late
+ * to finish the eeh setup for this device.
+ */
+void eeh_add_device_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
+
+/**
+ * eeh_remove_device - undo EEH setup for the indicated pci device
+ * @dev: pci device to be removed
+ *
+ * This routine should be when a device is removed from a running
+ * system (e.g. by hotplug or dlpar).
+ */
+void eeh_remove_device(struct pci_dev *);
+
+#define EEH_DISABLE		0
+#define EEH_ENABLE		1
+#define EEH_RELEASE_LOADSTORE	2
+#define EEH_RELEASE_DMA		3
+
+/**
+ * Notifier event flags.
+ */
+#define EEH_NOTIFY_FREEZE  1
+
+/** EEH event -- structure holding pci slot data that describes
+ *  a change in the isolation status of a PCI slot.  A pointer
+ *  to this struct is passed as the data pointer in a notify callback.
+ */
+struct eeh_event {
+	struct list_head     list;
+	struct pci_dev       *dev;
+	struct device_node   *dn;
+	int                  reset_state;
+};
+
+/** Register to find out about EEH events. */
+int eeh_register_notifier(struct notifier_block *nb);
+int eeh_unregister_notifier(struct notifier_block *nb);
+
+/**
+ * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
+ *
+ * If this macro yields TRUE, the caller relays to eeh_check_failure()
+ * which does further tests out of line.
+ */
+#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0)
+
+/*
+ * Reads from a device which has been isolated by EEH will return
+ * all 1s.  This macro gives an all-1s value of the given size (in
+ * bytes: 1, 2, or 4) for comparing with the result of a read.
+ */
+#define EEH_IO_ERROR_VALUE(size)	(~0U >> ((4 - (size)) * 8))
+
+#else /* !CONFIG_EEH */
+static inline void eeh_init(void) { }
+
+static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	return val;
+}
+
+static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+{
+	return 0;
+}
+
+static inline void pci_addr_cache_build(void) { }
+
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
+static inline void eeh_remove_device(struct pci_dev *dev) { }
+
+#define EEH_POSSIBLE_ERROR(val, type) (0)
+#define EEH_IO_ERROR_VALUE(size) (-1UL)
+#endif /* CONFIG_EEH */
+
+/* 
+ * MMIO read/write operations with EEH support.
+ */
+static inline u8 eeh_readb(const volatile void __iomem *addr)
+{
+	u8 val = in_8(addr);
+	if (EEH_POSSIBLE_ERROR(val, u8))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_writeb(u8 val, volatile void __iomem *addr)
+{
+	out_8(addr, val);
+}
+
+static inline u16 eeh_readw(const volatile void __iomem *addr)
+{
+	u16 val = in_le16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_writew(u16 val, volatile void __iomem *addr)
+{
+	out_le16(addr, val);
+}
+static inline u16 eeh_raw_readw(const volatile void __iomem *addr)
+{
+	u16 val = in_be16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_raw_writew(u16 val, volatile void __iomem *addr) {
+	volatile u16 __iomem *vaddr = (volatile u16 __iomem *) addr;
+	out_be16(vaddr, val);
+}
+
+static inline u32 eeh_readl(const volatile void __iomem *addr)
+{
+	u32 val = in_le32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_writel(u32 val, volatile void __iomem *addr)
+{
+	out_le32(addr, val);
+}
+static inline u32 eeh_raw_readl(const volatile void __iomem *addr)
+{
+	u32 val = in_be32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_raw_writel(u32 val, volatile void __iomem *addr)
+{
+	out_be32(addr, val);
+}
+
+static inline u64 eeh_readq(const volatile void __iomem *addr)
+{
+	u64 val = in_le64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_writeq(u64 val, volatile void __iomem *addr)
+{
+	out_le64(addr, val);
+}
+static inline u64 eeh_raw_readq(const volatile void __iomem *addr)
+{
+	u64 val = in_be64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+static inline void eeh_raw_writeq(u64 val, volatile void __iomem *addr)
+{
+	out_be64(addr, val);
+}
+
+#define EEH_CHECK_ALIGN(v,a) \
+	((((unsigned long)(v)) & ((a) - 1)) == 0)
+
+static inline void eeh_memset_io(volatile void __iomem *addr, int c,
+				 unsigned long n)
+{
+	u32 lc = c;
+	lc |= lc << 8;
+	lc |= lc << 16;
+
+	while(n && !EEH_CHECK_ALIGN(addr, 4)) {
+		*((volatile u8 *)addr) = c;
+		addr = (void *)((unsigned long)addr + 1);
+		n--;
+	}
+	while(n >= 4) {
+		*((volatile u32 *)addr) = lc;
+		addr = (void *)((unsigned long)addr + 4);
+		n -= 4;
+	}
+	while(n) {
+		*((volatile u8 *)addr) = c;
+		addr = (void *)((unsigned long)addr + 1);
+		n--;
+	}
+	__asm__ __volatile__ ("sync" : : : "memory");
+}
+static inline void eeh_memcpy_fromio(void *dest, const volatile void __iomem *src,
+				     unsigned long n)
+{
+	void *vsrc = (void __force *) src;
+	void *destsave = dest;
+	unsigned long nsave = n;
+
+	while(n && (!EEH_CHECK_ALIGN(vsrc, 4) || !EEH_CHECK_ALIGN(dest, 4))) {
+		*((u8 *)dest) = *((volatile u8 *)vsrc);
+		__asm__ __volatile__ ("eieio" : : : "memory");
+		vsrc = (void *)((unsigned long)vsrc + 1);
+		dest = (void *)((unsigned long)dest + 1);			
+		n--;
+	}
+	while(n > 4) {
+		*((u32 *)dest) = *((volatile u32 *)vsrc);
+		__asm__ __volatile__ ("eieio" : : : "memory");
+		vsrc = (void *)((unsigned long)vsrc + 4);
+		dest = (void *)((unsigned long)dest + 4);			
+		n -= 4;
+	}
+	while(n) {
+		*((u8 *)dest) = *((volatile u8 *)vsrc);
+		__asm__ __volatile__ ("eieio" : : : "memory");
+		vsrc = (void *)((unsigned long)vsrc + 1);
+		dest = (void *)((unsigned long)dest + 1);			
+		n--;
+	}
+	__asm__ __volatile__ ("sync" : : : "memory");
+
+	/* Look for ffff's here at dest[n].  Assume that at least 4 bytes
+	 * were copied. Check all four bytes.
+	 */
+	if ((nsave >= 4) &&
+		(EEH_POSSIBLE_ERROR((*((u32 *) destsave+nsave-4)), u32))) {
+		eeh_check_failure(src, (*((u32 *) destsave+nsave-4)));
+	}
+}
+
+static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src,
+				   unsigned long n)
+{
+	void *vdest = (void __force *) dest;
+
+	while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) {
+		*((volatile u8 *)vdest) = *((u8 *)src);
+		src = (void *)((unsigned long)src + 1);
+		vdest = (void *)((unsigned long)vdest + 1);			
+		n--;
+	}
+	while(n > 4) {
+		*((volatile u32 *)vdest) = *((volatile u32 *)src);
+		src = (void *)((unsigned long)src + 4);
+		vdest = (void *)((unsigned long)vdest + 4);			
+		n-=4;
+	}
+	while(n) {
+		*((volatile u8 *)vdest) = *((u8 *)src);
+		src = (void *)((unsigned long)src + 1);
+		vdest = (void *)((unsigned long)vdest + 1);			
+		n--;
+	}
+	__asm__ __volatile__ ("sync" : : : "memory");
+}
+
+#undef EEH_CHECK_ALIGN
+
+static inline u8 eeh_inb(unsigned long port)
+{
+	u8 val;
+	if (!_IO_IS_VALID(port))
+		return ~0;
+	val = in_8((u8 __iomem *)(port+pci_io_base));
+	if (EEH_POSSIBLE_ERROR(val, u8))
+		return eeh_check_failure((void __iomem *)(port), val);
+	return val;
+}
+
+static inline void eeh_outb(u8 val, unsigned long port)
+{
+	if (_IO_IS_VALID(port))
+		out_8((u8 __iomem *)(port+pci_io_base), val);
+}
+
+static inline u16 eeh_inw(unsigned long port)
+{
+	u16 val;
+	if (!_IO_IS_VALID(port))
+		return ~0;
+	val = in_le16((u16 __iomem *)(port+pci_io_base));
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure((void __iomem *)(port), val);
+	return val;
+}
+
+static inline void eeh_outw(u16 val, unsigned long port)
+{
+	if (_IO_IS_VALID(port))
+		out_le16((u16 __iomem *)(port+pci_io_base), val);
+}
+
+static inline u32 eeh_inl(unsigned long port)
+{
+	u32 val;
+	if (!_IO_IS_VALID(port))
+		return ~0;
+	val = in_le32((u32 __iomem *)(port+pci_io_base));
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure((void __iomem *)(port), val);
+	return val;
+}
+
+static inline void eeh_outl(u32 val, unsigned long port)
+{
+	if (_IO_IS_VALID(port))
+		out_le32((u32 __iomem *)(port+pci_io_base), val);
+}
+
+/* in-string eeh macros */
+static inline void eeh_insb(unsigned long port, void * buf, int ns)
+{
+	_insb((u8 __iomem *)(port+pci_io_base), buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
+		eeh_check_failure((void __iomem *)(port), *(u8*)buf);
+}
+
+static inline void eeh_insw_ns(unsigned long port, void * buf, int ns)
+{
+	_insw_ns((u16 __iomem *)(port+pci_io_base), buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
+		eeh_check_failure((void __iomem *)(port), *(u16*)buf);
+}
+
+static inline void eeh_insl_ns(unsigned long port, void * buf, int nl)
+{
+	_insl_ns((u32 __iomem *)(port+pci_io_base), buf, nl);
+	if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
+		eeh_check_failure((void __iomem *)(port), *(u32*)buf);
+}
+
+#endif /* _PPC64_EEH_H */
diff --git a/include/asm-ppc64/elf.h b/include/asm-ppc64/elf.h
new file mode 100644
index 000000000000..8457d90244fb
--- /dev/null
+++ b/include/asm-ppc64/elf.h
@@ -0,0 +1,399 @@
+#ifndef __PPC64_ELF_H
+#define __PPC64_ELF_H
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* Keep this the last entry.  */
+#define R_PPC_NUM		95
+
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/ptrace.h>
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+#define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+#define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+# define elf_addr_t unsigned long
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+# define elf_addr_t u32
+#endif
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  The entry with index 33 contains the vrsave as the first 
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#ifdef __KERNEL__
+
+/* Common routine for both 32-bit and 64-bit processes */
+static inline void ppc64_elf_core_copy_regs(elf_gregset_t elf_regs,
+					    struct pt_regs *regs)
+{
+	int i;
+	int gprs = sizeof(struct pt_regs)/sizeof(elf_greg_t64);
+
+	if (gprs > ELF_NGREG)
+		gprs = ELF_NGREG;
+
+	for (i=0; i < gprs; i++)
+		elf_regs[i] = (elf_greg_t)((elf_greg_t64 *)regs)[i];
+}
+#define ELF_CORE_COPY_REGS(gregs, regs) ppc64_elf_core_copy_regs(gregs, regs);
+
+static inline int dump_task_regs(struct task_struct *tsk,
+				 elf_gregset_t *elf_regs)
+{
+	struct pt_regs *regs = tsk->thread.regs;
+	if (regs)
+		ppc64_elf_core_copy_regs(*elf_regs, regs);
+
+	return 1;
+}
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+
+extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); 
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+/* XXX Should we define the XFPREGS using altivec ??? */
+
+#endif
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	memset(_r->gpr, 0, sizeof(_r->gpr)); \
+	_r->ctr = _r->link = _r->xer = _r->ccr = 0; \
+	_r->gpr[2] = load_addr; \
+} while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2)				\
+do {								\
+	unsigned long new_flags = 0;				\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		new_flags = _TIF_32BIT;				\
+	if ((current_thread_info()->flags & _TIF_32BIT)		\
+	    != new_flags)					\
+		set_thread_flag(TIF_ABI_PENDING);		\
+	else							\
+		clear_thread_flag(TIF_ABI_PENDING);		\
+	if (ibcs2)						\
+		set_personality(PER_SVR4);			\
+	else if (current->personality != PER_LINUX32)		\
+		set_personality(PER_LINUX);			\
+} while (0)
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, exec_stk)	(exec_stk != EXSTACK_DISABLE_X)
+
+#endif
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+/* The vDSO location. We have to use the same value as x86 for glibc's
+ * sake :-)
+ */
+#define AT_SYSINFO_EHDR		33
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/* We do have an arch_setup_additional_pages for vDSO matters */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack);
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	/* vDSO base */							\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, current->thread.vdso_base);       	\
+ } while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+#endif /* __PPC64_ELF_H */
diff --git a/include/asm-ppc64/errno.h b/include/asm-ppc64/errno.h
new file mode 100644
index 000000000000..69bc3b0c6cbe
--- /dev/null
+++ b/include/asm-ppc64/errno.h
@@ -0,0 +1,18 @@
+#ifndef _PPC64_ERRNO_H
+#define _PPC64_ERRNO_H
+
+/* 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm-generic/errno.h>
+
+#undef	EDEADLOCK
+#define	EDEADLOCK	58	/* File locking deadlock error */
+
+#define _LAST_ERRNO	516
+
+#endif
diff --git a/include/asm-ppc64/fcntl.h b/include/asm-ppc64/fcntl.h
new file mode 100644
index 000000000000..842560d50656
--- /dev/null
+++ b/include/asm-ppc64/fcntl.h
@@ -0,0 +1,89 @@
+#ifndef _PPC64_FCNTL_H
+#define _PPC64_FCNTL_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY      040000	/* must be a directory */
+#define O_NOFOLLOW      0100000	/* don't follow links */
+#define O_LARGEFILE     0200000
+#define O_DIRECT	0400000	/* direct disk access hint */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+#ifdef __KERNEL__
+#define F_POSIX		1
+#define F_FLOCK		2
+#define F_BROKEN	4	/* broken flock() emulation */
+#endif /* __KERNEL__ */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* _PPC64_FCNTL_H */
diff --git a/include/asm-ppc64/floppy.h b/include/asm-ppc64/floppy.h
new file mode 100644
index 000000000000..5c497b588e54
--- /dev/null
+++ b/include/asm-ppc64/floppy.h
@@ -0,0 +1,106 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_PPC64_FLOPPY_H
+#define __ASM_PPC64_FLOPPY_H
+
+#include <linux/config.h>
+#include <asm/machdep.h>
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()        disable_dma(FLOPPY_DMA)
+#define fd_request_dma()        request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt, \
+					    SA_INTERRUPT|SA_SAMPLE_RANDOM, \
+				            "floppy", NULL)
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define fd_dma_setup(addr,size,mode,io) ppc64_fd_dma_setup(addr,size,mode,io)
+
+static __inline__ int 
+ppc64_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(NULL, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */ {
+		bus_addr = pci_map_single(NULL, addr, size, dir);
+	}
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+#endif /* CONFIG_PCI */
+
+__inline__ void virtual_dma_init(void)
+{
+	/* Nothing to do on PowerPC */
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2			/* Don't change this! */
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s)	(0)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_PPC64_FLOPPY_H */
diff --git a/include/asm-ppc64/hardirq.h b/include/asm-ppc64/hardirq.h
new file mode 100644
index 000000000000..4ee72bb1fd48
--- /dev/null
+++ b/include/asm-ppc64/hardirq.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/preempt.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "illegal vector %d received!\n", irq);
+	BUG();
+}
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-ppc64/hdreg.h b/include/asm-ppc64/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-ppc64/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-ppc64/hvcall.h b/include/asm-ppc64/hvcall.h
new file mode 100644
index 000000000000..4f668a4baff0
--- /dev/null
+++ b/include/asm-ppc64/hvcall.h
@@ -0,0 +1,167 @@
+#ifndef _PPC64_HVCALL_H
+#define _PPC64_HVCALL_H
+
+#define HVSC			.long 0x44000022
+
+#define H_Success	0
+#define H_Busy		1	/* Hardware busy -- retry later */
+#define H_Constrained	4	/* Resource request constrained to max allowed */
+#define H_LongBusyStartRange   9900  /* Start of long busy range */
+#define H_LongBusyOrder1msec   9900  /* Long busy, hint that 1msec is a good time to retry */
+#define H_LongBusyOrder10msec  9901  /* Long busy, hint that 10msec is a good time to retry */
+#define H_LongBusyOrder100msec 9902  /* Long busy, hint that 100msec is a good time to retry */
+#define H_LongBusyOrder1sec    9903  /* Long busy, hint that 1sec is a good time to retry */
+#define H_LongBusyOrder10sec   9904  /* Long busy, hint that 10sec is a good time to retry */
+#define H_LongBusyOrder100sec  9905  /* Long busy, hint that 100sec is a good time to retry */
+#define H_LongBusyEndRange     9905  /* End of long busy range */
+#define H_Hardware	-1	/* Hardware error */
+#define H_Function	-2	/* Function not supported */
+#define H_Privilege	-3	/* Caller not privileged */
+#define H_Parameter	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_Bad_Mode	-5	/* Illegal msr value */
+#define H_PTEG_Full	-6	/* PTEG is full */
+#define H_Not_Found	-7	/* PTE was not found" */
+#define H_Reserved_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NoMem                 -9
+#define H_Authority            -10
+#define H_Permission           -11
+#define H_Dropped              -12
+#define H_SourceParm           -13
+#define H_DestParm             -14
+#define H_RemoteParm           -15
+#define H_Resource             -16
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_isLongBusy(x)  ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE		        0xE0
+#define H_CONFER		0xE4
+#define H_PROD		        0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC		        0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA             0x110
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_POLL_PENDING	        0x1D8
+
+#ifndef __ASSEMBLY__
+
+/* plpar_hcall() -- Generic call interface using above opcodes
+ *
+ * The actual call interface is a hypervisor call instruction with
+ * the opcode in R3 and input args in R4-R7.
+ * Status is returned in R3 with variable output values in R4-R11.
+ * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
+ * and return only two out args which MUST ALWAYS BE PROVIDED.
+ */
+long plpar_hcall(unsigned long opcode,
+		 unsigned long arg1,
+		 unsigned long arg2,
+		 unsigned long arg3,
+		 unsigned long arg4,
+		 unsigned long *out1,
+		 unsigned long *out2,
+		 unsigned long *out3);
+
+/* Same as plpar_hcall but for those opcodes that return no values
+ * other than status.  Slightly more efficient.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/* 
+ * Special hcall interface for ibmveth support.
+ * Takes 8 input parms. Returns a rc and stores the
+ * R4 return value in *out1.
+ */
+long plpar_hcall_8arg_2ret(unsigned long opcode,
+			   unsigned long arg1,
+		  	   unsigned long arg2,
+			   unsigned long arg3,
+			   unsigned long arg4,
+			   unsigned long arg5,
+			   unsigned long arg6,
+			   unsigned long arg7,
+			   unsigned long arg8,
+			   unsigned long *out1);
+ 
+/* plpar_hcall_4out()
+ *
+ * same as plpar_hcall except with 4 output arguments.  
+ * 
+ */
+long plpar_hcall_4out(unsigned long opcode,
+		      unsigned long arg1,
+		      unsigned long arg2,
+		      unsigned long arg3,
+		      unsigned long arg4,
+		      unsigned long *out1,
+		      unsigned long *out2,
+		      unsigned long *out3,
+		      unsigned long *out4);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PPC64_HVCALL_H */
diff --git a/include/asm-ppc64/hvconsole.h b/include/asm-ppc64/hvconsole.h
new file mode 100644
index 000000000000..d89d94c91815
--- /dev/null
+++ b/include/asm-ppc64/hvconsole.h
@@ -0,0 +1,40 @@
+/*
+ * hvconsole.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * LPAR console support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCONSOLE_H
+#define _PPC64_HVCONSOLE_H
+
+/*
+ * This is the max number of console adapters that can/will be found as
+ * console devices on first stage console init.  Any number beyond this range
+ * can't be used as a console device but is still a valid tty device.
+ */
+#define MAX_NR_HVC_CONSOLES	16
+
+extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
+extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+
+/* Early discovery of console adapters. */
+extern int hvc_find_vtys(void);
+
+/* Implemented by a console driver */
+extern int hvc_instantiate(uint32_t vtermno, int index);
+#endif /* _PPC64_HVCONSOLE_H */
diff --git a/include/asm-ppc64/hvcserver.h b/include/asm-ppc64/hvcserver.h
new file mode 100644
index 000000000000..aecba9665796
--- /dev/null
+++ b/include/asm-ppc64/hvcserver.h
@@ -0,0 +1,57 @@
+/*
+ * hvcserver.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCSERVER_H
+#define _PPC64_HVCSERVER_H
+
+#include <linux/list.h>
+
+/* Converged Location Code length */
+#define HVCS_CLC_LENGTH	79
+
+/**
+ * hvcs_partner_info - an element in a list of partner info
+ * @node: list_head denoting this partner_info struct's position in the list of
+ *	partner info.
+ * @unit_address: The partner unit address of this entry.
+ * @partition_ID: The partner partition ID of this entry.
+ * @location_code: The converged location code of this entry + 1 char for the
+ *	null-term.
+ *
+ * This structure outlines the format that partner info is presented to a caller
+ * of the hvcs partner info fetching functions.  These are strung together into
+ * a list using linux kernel lists.
+ */
+struct hvcs_partner_info {
+	struct list_head node;
+	uint32_t unit_address;
+	uint32_t partition_ID;
+	char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
+};
+
+extern int hvcs_free_partner_info(struct list_head *head);
+extern int hvcs_get_partner_info(uint32_t unit_address,
+		struct list_head *head, unsigned long *pi_buff);
+extern int hvcs_register_connection(uint32_t unit_address,
+		uint32_t p_partition_ID, uint32_t p_unit_address);
+extern int hvcs_free_connection(uint32_t unit_address);
+
+#endif /* _PPC64_HVCSERVER_H */
diff --git a/include/asm-ppc64/hw_irq.h b/include/asm-ppc64/hw_irq.h
new file mode 100644
index 000000000000..baea40e695ec
--- /dev/null
+++ b/include/asm-ppc64/hw_irq.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ * Use inline IRQs where possible - Anton Blanchard <anton@au.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC64_HW_IRQ_H
+#define _PPC64_HW_IRQ_H
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <asm/irq.h>
+
+int timer_interrupt(struct pt_regs *);
+extern void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq);
+
+#ifdef CONFIG_PPC_ISERIES
+
+extern unsigned long local_get_flags(void);
+extern unsigned long local_irq_disable(void);
+extern void local_irq_restore(unsigned long);
+
+#define local_irq_enable()	local_irq_restore(1)
+#define local_save_flags(flags)	((flags) = local_get_flags())
+#define local_irq_save(flags)	((flags) = local_irq_disable())
+
+#define irqs_disabled()		(local_get_flags() == 0)
+
+#else
+
+#define local_save_flags(flags)	((flags) = mfmsr())
+#define local_irq_restore(flags) do { \
+	__asm__ __volatile__("": : :"memory"); \
+	__mtmsrd((flags), 1); \
+} while(0)
+
+static inline void local_irq_disable(void)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	__mtmsrd(msr & ~MSR_EE, 1);
+	__asm__ __volatile__("": : :"memory");
+}
+
+static inline void local_irq_enable(void)
+{
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	__mtmsrd(msr | MSR_EE, 1);
+}
+
+static inline void __do_save_and_cli(unsigned long *flags)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	*flags = msr;
+	__mtmsrd(msr & ~MSR_EE, 1);
+	__asm__ __volatile__("": : :"memory");
+}
+
+#define local_irq_save(flags)          __do_save_and_cli(&flags)
+
+#define irqs_disabled()				\
+({						\
+	unsigned long flags;			\
+	local_save_flags(flags);		\
+	!(flags & MSR_EE);			\
+})
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#define mask_irq(irq)						\
+	({							\
+	 	irq_desc_t *desc = get_irq_desc(irq);		\
+		if (desc->handler && desc->handler->disable)	\
+			desc->handler->disable(irq);		\
+	})
+#define unmask_irq(irq)						\
+	({							\
+	 	irq_desc_t *desc = get_irq_desc(irq);		\
+		if (desc->handler && desc->handler->enable)	\
+			desc->handler->enable(irq);		\
+	})
+#define ack_irq(irq)						\
+	({							\
+	 	irq_desc_t *desc = get_irq_desc(irq);		\
+		if (desc->handler && desc->handler->ack)	\
+			desc->handler->ack(irq);		\
+	})
+
+/* Should we handle this via lost interrupts and IPIs or should we don't care like
+ * we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+ 
+#endif /* _PPC64_HW_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/iSeries/HvCall.h b/include/asm-ppc64/iSeries/HvCall.h
new file mode 100644
index 000000000000..d9a2e74e2399
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCall.h
@@ -0,0 +1,205 @@
+/*
+ * HvCall.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+//===========================================================================
+//
+//	This file contains the "hypervisor call" interface which is used to
+//	drive the hypervisor from the OS.
+//
+//===========================================================================
+#ifndef _HVCALL_H
+#define _HVCALL_H
+
+//-------------------------------------------------------------------
+// Standard Includes
+//-------------------------------------------------------------------
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/paca.h>
+
+/*
+enum HvCall_ReturnCode
+{
+	HvCall_Good		= 0,
+	HvCall_Partial		= 1,
+	HvCall_NotOwned		= 2,
+	HvCall_NotFreed		= 3,
+	HvCall_UnspecifiedError	= 4
+};
+
+enum HvCall_TypeOfSIT
+{
+	HvCall_ReduceOnly	= 0,
+	HvCall_Unconditional	= 1
+};
+
+enum HvCall_TypeOfYield
+{
+	HvCall_YieldTimed	= 0,	// Yield until specified time
+	HvCall_YieldToActive	= 1,	// Yield until all active procs have run
+	HvCall_YieldToProc	= 2	// Yield until the specified processor has run
+};
+
+enum HvCall_InterruptMasks
+{
+	HvCall_MaskIPI		= 0x00000001,
+	HvCall_MaskLpEvent	= 0x00000002,
+	HvCall_MaskLpProd	= 0x00000004,
+	HvCall_MaskTimeout	= 0x00000008
+};
+
+enum HvCall_VaryOffChunkRc
+{
+	HvCall_VaryOffSucceeded		= 0,
+	HvCall_VaryOffWithdrawn		= 1,
+	HvCall_ChunkInLoadArea		= 2,
+	HvCall_ChunkInHPT		= 3,
+	HvCall_ChunkNotAccessible	= 4,
+	HvCall_ChunkInUse		= 5
+};
+*/
+
+/* Type of yield for HvCallBaseYieldProcessor */
+#define HvCall_YieldTimed 	0	// Yield until specified time (tb)
+#define HvCall_YieldToActive	1	// Yield until all active procs have run
+#define HvCall_YieldToProc	2	// Yield until the specified processor has run
+
+/* interrupt masks for setEnabledInterrupts */
+#define HvCall_MaskIPI		0x00000001
+#define HvCall_MaskLpEvent	0x00000002
+#define HvCall_MaskLpProd	0x00000004
+#define HvCall_MaskTimeout	0x00000008
+
+/* Log buffer formats                       */
+#define HvCall_LogBuffer_ASCII          0
+#define HvCall_LogBuffer_EBCDIC         1
+
+#define HvCallBaseAckDeferredInts			HvCallBase +  0
+#define HvCallBaseCpmPowerOff				HvCallBase +  1
+#define HvCallBaseGetHwPatch				HvCallBase +  2
+#define HvCallBaseReIplSpAttn				HvCallBase +  3
+#define HvCallBaseSetASR				HvCallBase +  4
+#define HvCallBaseSetASRAndRfi				HvCallBase +  5 
+#define HvCallBaseSetIMR				HvCallBase +  6
+#define HvCallBaseSendIPI				HvCallBase +  7
+#define HvCallBaseTerminateMachine			HvCallBase +  8
+#define HvCallBaseTerminateMachineSrc			HvCallBase +  9
+#define HvCallBaseProcessPlicInterrupts			HvCallBase + 10
+#define HvCallBaseIsPrimaryCpmOrMsdIpl			HvCallBase + 11
+#define HvCallBaseSetVirtualSIT				HvCallBase + 12
+#define HvCallBaseVaryOffThisProcessor			HvCallBase + 13
+#define HvCallBaseVaryOffMemoryChunk			HvCallBase + 14
+#define HvCallBaseVaryOffInteractivePercentage		HvCallBase + 15
+#define HvCallBaseSendLpProd				HvCallBase + 16
+#define HvCallBaseSetEnabledInterrupts			HvCallBase + 17
+#define HvCallBaseYieldProcessor			HvCallBase + 18
+#define HvCallBaseVaryOffSharedProcUnits		HvCallBase + 19
+#define HvCallBaseSetVirtualDecr			HvCallBase + 20
+#define HvCallBaseClearLogBuffer			HvCallBase + 21
+#define HvCallBaseGetLogBufferCodePage			HvCallBase + 22
+#define HvCallBaseGetLogBufferFormat			HvCallBase + 23
+#define HvCallBaseGetLogBufferLength			HvCallBase + 24
+#define HvCallBaseReadLogBuffer 			HvCallBase + 25
+#define HvCallBaseSetLogBufferFormatAndCodePage		HvCallBase + 26
+#define HvCallBaseWriteLogBuffer               		HvCallBase + 27
+#define HvCallBaseRouter28				HvCallBase + 28
+#define HvCallBaseRouter29				HvCallBase + 29
+#define HvCallBaseRouter30				HvCallBase + 30
+#define HvCallBaseSetDebugBus 				HvCallBase + 31
+
+#define HvCallCcSetDABR  				HvCallCc + 7
+
+//=====================================================================================
+static inline void		HvCall_setVirtualDecr(void)
+{
+	/* Ignore any error return codes - most likely means that the target value for the
+	 * LP has been increased and this vary off would bring us below the new target. */
+	HvCall0(HvCallBaseSetVirtualDecr);
+}
+//=====================================================================
+static inline void		HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
+{
+	HvCall2( HvCallBaseYieldProcessor, typeOfYield, yieldParm );
+}
+//=====================================================================
+static inline void		HvCall_setEnabledInterrupts(u64 enabledInterrupts)
+{
+	HvCall1(HvCallBaseSetEnabledInterrupts,enabledInterrupts);
+}
+
+//=====================================================================
+static inline void		HvCall_clearLogBuffer(HvLpIndex lpindex)
+{
+	HvCall1(HvCallBaseClearLogBuffer,lpindex);
+}
+
+//=====================================================================
+static inline u32  		HvCall_getLogBufferCodePage(HvLpIndex lpindex)
+{
+	u32 retVal = HvCall1(HvCallBaseGetLogBufferCodePage,lpindex);
+	return retVal;
+}
+
+//=====================================================================
+static inline int  		HvCall_getLogBufferFormat(HvLpIndex lpindex)
+{
+	int retVal = HvCall1(HvCallBaseGetLogBufferFormat,lpindex);
+	return retVal;
+}
+
+//=====================================================================
+static inline u32  		HvCall_getLogBufferLength(HvLpIndex lpindex)
+{
+	u32 retVal = HvCall1(HvCallBaseGetLogBufferLength,lpindex);
+	return retVal;
+}
+
+//=====================================================================
+static inline void  		HvCall_setLogBufferFormatAndCodepage(int format, u32 codePage)
+{
+	HvCall2(HvCallBaseSetLogBufferFormatAndCodePage,format, codePage);
+}
+
+//=====================================================================
+int HvCall_readLogBuffer(HvLpIndex lpindex, void *buffer, u64 bufLen);
+void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
+
+//=====================================================================
+static inline void		HvCall_sendIPI(struct paca_struct * targetPaca)
+{
+	HvCall1( HvCallBaseSendIPI, targetPaca->paca_index );
+}
+
+//=====================================================================
+static inline void		HvCall_terminateMachineSrc(void)
+{
+	HvCall0( HvCallBaseTerminateMachineSrc );
+}
+
+static inline void HvCall_setDABR(unsigned long val)
+{
+	HvCall1(HvCallCcSetDABR, val);
+}
+
+static inline void HvCall_setDebugBus(unsigned long val)
+{
+	HvCall1(HvCallBaseSetDebugBus, val);
+}
+
+#endif /* _HVCALL_H */
diff --git a/include/asm-ppc64/iSeries/HvCallCfg.h b/include/asm-ppc64/iSeries/HvCallCfg.h
new file mode 100644
index 000000000000..9f40f16de533
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallCfg.h
@@ -0,0 +1,213 @@
+/*
+ * HvCallCfg.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+//=====================================================================================
+//
+//	This file contains the "hypervisor call" interface which is used to
+//	drive the hypervisor from the OS.
+//
+//=====================================================================================
+#ifndef _HVCALLCFG_H
+#define _HVCALLCFG_H
+
+//-------------------------------------------------------------------
+// Standard Includes
+//-------------------------------------------------------------------
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+
+//-------------------------------------------------------------------------------------
+// Constants
+//-------------------------------------------------------------------------------------
+
+enum HvCallCfg_ReqQual
+{
+	HvCallCfg_Cur	= 0,
+	HvCallCfg_Init	= 1,
+	HvCallCfg_Max	= 2,
+	HvCallCfg_Min	= 3
+};
+
+#define HvCallCfgGetLps					HvCallCfg +  0
+#define HvCallCfgGetActiveLpMap				HvCallCfg +  1
+#define HvCallCfgGetLpVrmIndex				HvCallCfg +  2
+#define HvCallCfgGetLpMinSupportedPlicVrmIndex		HvCallCfg +  3
+#define HvCallCfgGetLpMinCompatablePlicVrmIndex		HvCallCfg +  4
+#define HvCallCfgGetLpVrmName				HvCallCfg +  5 
+#define HvCallCfgGetSystemPhysicalProcessors		HvCallCfg +  6
+#define HvCallCfgGetPhysicalProcessors			HvCallCfg +  7
+#define HvCallCfgGetSystemMsChunks			HvCallCfg +  8
+#define HvCallCfgGetMsChunks				HvCallCfg +  9
+#define HvCallCfgGetInteractivePercentage		HvCallCfg + 10
+#define HvCallCfgIsBusDedicated				HvCallCfg + 11
+#define HvCallCfgGetBusOwner				HvCallCfg + 12
+#define HvCallCfgGetBusAllocation			HvCallCfg + 13
+#define HvCallCfgGetBusUnitOwner			HvCallCfg + 14
+#define HvCallCfgGetBusUnitAllocation			HvCallCfg + 15
+#define HvCallCfgGetVirtualBusPool			HvCallCfg + 16
+#define HvCallCfgGetBusUnitInterruptProc		HvCallCfg + 17
+#define HvCallCfgGetConfiguredBusUnitsForIntProc	HvCallCfg + 18
+#define HvCallCfgGetRioSanBusPool			HvCallCfg + 19
+#define HvCallCfgGetSharedPoolIndex			HvCallCfg + 20
+#define HvCallCfgGetSharedProcUnits			HvCallCfg + 21
+#define HvCallCfgGetNumProcsInSharedPool		HvCallCfg + 22
+#define HvCallCfgRouter23				HvCallCfg + 23
+#define HvCallCfgRouter24				HvCallCfg + 24
+#define HvCallCfgRouter25				HvCallCfg + 25
+#define HvCallCfgRouter26				HvCallCfg + 26
+#define HvCallCfgRouter27				HvCallCfg + 27
+#define HvCallCfgGetMinRuntimeMsChunks			HvCallCfg + 28
+#define HvCallCfgSetMinRuntimeMsChunks			HvCallCfg + 29
+#define HvCallCfgGetVirtualLanIndexMap			HvCallCfg + 30
+#define HvCallCfgGetLpExecutionMode			HvCallCfg + 31
+#define HvCallCfgGetHostingLpIndex 			HvCallCfg + 32
+
+//====================================================================
+static inline HvLpIndex	HvCallCfg_getLps(void)
+{
+	HvLpIndex retVal = HvCall0(HvCallCfgGetLps);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//====================================================================
+static inline int		HvCallCfg_isBusDedicated(u64 busIndex)
+{
+	int retVal = HvCall1(HvCallCfgIsBusDedicated,busIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//====================================================================
+static inline HvLpIndex	HvCallCfg_getBusOwner(u64 busIndex)
+{
+	HvLpIndex retVal = HvCall1(HvCallCfgGetBusOwner,busIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//====================================================================
+static inline HvLpIndexMap	HvCallCfg_getBusAllocation(u64 busIndex)
+{
+	HvLpIndexMap retVal = HvCall1(HvCallCfgGetBusAllocation,busIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//====================================================================
+static inline HvLpIndexMap	HvCallCfg_getActiveLpMap(void)
+{
+	HvLpIndexMap retVal = HvCall0(HvCallCfgGetActiveLpMap);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//====================================================================
+static inline HvLpVirtualLanIndexMap	HvCallCfg_getVirtualLanIndexMap(HvLpIndex lp)
+{
+	// This is a new function in V5R1 so calls to this on older 
+	// hypervisors will return -1
+	u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
+	if(retVal == -1)
+		retVal = 0;
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getSystemMsChunks(void)
+{
+	u64 retVal = HvCall0(HvCallCfgGetSystemMsChunks);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getMsChunks(HvLpIndex lp,enum HvCallCfg_ReqQual qual)
+{
+	u64 retVal = HvCall2(HvCallCfgGetMsChunks,lp,qual);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getMinRuntimeMsChunks(HvLpIndex lp)
+{
+	// NOTE: This function was added in v5r1 so older hypervisors will return a -1 value
+	u64 retVal = HvCall1(HvCallCfgGetMinRuntimeMsChunks,lp);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_setMinRuntimeMsChunks(u64 chunks)
+{
+	u64 retVal = HvCall1(HvCallCfgSetMinRuntimeMsChunks,chunks);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getSystemPhysicalProcessors(void)
+{
+	u64 retVal = HvCall0(HvCallCfgGetSystemPhysicalProcessors);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getPhysicalProcessors(HvLpIndex lp,enum HvCallCfg_ReqQual qual)
+{
+	u64 retVal = HvCall2(HvCallCfgGetPhysicalProcessors,lp,qual);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//===================================================================
+static inline u64		HvCallCfg_getConfiguredBusUnitsForInterruptProc(HvLpIndex lp,
+										u16 hvLogicalProcIndex)
+{
+	u64 retVal = HvCall2(HvCallCfgGetConfiguredBusUnitsForIntProc,lp,hvLogicalProcIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+
+}
+//==================================================================
+static inline HvLpSharedPoolIndex	HvCallCfg_getSharedPoolIndex(HvLpIndex lp)
+{
+	HvLpSharedPoolIndex retVal =
+		HvCall1(HvCallCfgGetSharedPoolIndex,lp);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+
+}
+//==================================================================
+static inline u64	HvCallCfg_getSharedProcUnits(HvLpIndex lp,enum HvCallCfg_ReqQual qual)
+{
+	u64 retVal = HvCall2(HvCallCfgGetSharedProcUnits,lp,qual);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+
+}
+//==================================================================
+static inline u64	HvCallCfg_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
+{
+	u16 retVal = HvCall1(HvCallCfgGetNumProcsInSharedPool,sPI);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+
+}
+//==================================================================
+static inline HvLpIndex	HvCallCfg_getHostingLpIndex(HvLpIndex lp)
+{
+	u64 retVal = HvCall1(HvCallCfgGetHostingLpIndex,lp);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+
+}
+
+#endif /* _HVCALLCFG_H */
diff --git a/include/asm-ppc64/iSeries/HvCallEvent.h b/include/asm-ppc64/iSeries/HvCallEvent.h
new file mode 100644
index 000000000000..191ddce0c2c6
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallEvent.h
@@ -0,0 +1,297 @@
+/*
+ * HvCallEvent.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/*
+ *	This file contains the "hypervisor call" interface which is used to
+ *	drive the hypervisor from the OS.
+ */
+#ifndef _HVCALLEVENT_H
+#define _HVCALLEVENT_H
+
+/*
+ * Standard Includes
+ */
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/abs_addr.h>
+
+struct HvLpEvent;
+
+typedef u8 HvLpEvent_Type;
+typedef u8 HvLpEvent_AckInd;
+typedef u8 HvLpEvent_AckType;
+
+struct	HvCallEvent_PackedParms {
+	u8		xAckType:1;
+	u8		xAckInd:1;
+	u8		xRsvd:1;
+	u8		xTargetLp:5;
+	u8		xType;
+	u16		xSubtype;
+	HvLpInstanceId	xSourceInstId;
+	HvLpInstanceId	xTargetInstId;
+};
+
+typedef u8 HvLpDma_Direction;
+typedef u8 HvLpDma_AddressType;
+
+struct	HvCallEvent_PackedDmaParms {
+	u8		xDirection:1;
+	u8		xLocalAddrType:1;
+	u8		xRemoteAddrType:1;
+	u8		xRsvd1:5;
+	HvLpIndex	xRemoteLp;
+	u8		xType;
+	u8		xRsvd2;
+	HvLpInstanceId	xLocalInstId;
+	HvLpInstanceId	xRemoteInstId;
+};
+
+typedef u64 HvLpEvent_Rc;
+typedef u64 HvLpDma_Rc;
+
+#define HvCallEventAckLpEvent				HvCallEvent +  0
+#define HvCallEventCancelLpEvent			HvCallEvent +  1
+#define HvCallEventCloseLpEventPath			HvCallEvent +  2
+#define HvCallEventDmaBufList				HvCallEvent +  3
+#define HvCallEventDmaSingle				HvCallEvent +  4
+#define HvCallEventDmaToSp				HvCallEvent +  5 
+#define HvCallEventGetOverflowLpEvents			HvCallEvent +  6
+#define HvCallEventGetSourceLpInstanceId		HvCallEvent +  7
+#define HvCallEventGetTargetLpInstanceId		HvCallEvent +  8
+#define HvCallEventOpenLpEventPath			HvCallEvent +  9
+#define HvCallEventSetLpEventStack			HvCallEvent + 10
+#define HvCallEventSignalLpEvent			HvCallEvent + 11
+#define HvCallEventSignalLpEventParms			HvCallEvent + 12
+#define HvCallEventSetInterLpQueueIndex			HvCallEvent + 13
+#define HvCallEventSetLpEventQueueInterruptProc		HvCallEvent + 14
+#define HvCallEventRouter15				HvCallEvent + 15
+
+static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
+{
+	HvCall1(HvCallEventGetOverflowLpEvents,queueIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
+{
+	HvCall1(HvCallEventSetInterLpQueueIndex,queueIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
+		char *eventStackAddr, u32 eventStackSize)
+{
+	u64 abs_addr;
+
+	abs_addr = virt_to_abs(eventStackAddr);
+	HvCall3(HvCallEventSetLpEventStack, queueIndex, abs_addr,
+			eventStackSize);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
+		u16 lpLogicalProcIndex)
+{
+	HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
+			lpLogicalProcIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
+{
+	u64 abs_addr;
+	HvLpEvent_Rc retVal;
+
+#ifdef DEBUG_SENDEVENT
+	printk("HvCallEvent_signalLpEvent: *event = %016lx\n ",
+			(unsigned long)event);
+#endif
+	abs_addr = virt_to_abs(event);
+	retVal = (HvLpEvent_Rc)HvCall1(HvCallEventSignalLpEvent, abs_addr);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
+		HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
+		HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
+		HvLpInstanceId targetInstanceId, u64 correlationToken,
+		u64 eventData1, u64 eventData2, u64 eventData3,
+		u64 eventData4, u64 eventData5)
+{
+	HvLpEvent_Rc retVal;
+
+	// Pack the misc bits into a single Dword to pass to PLIC
+	union {
+		struct HvCallEvent_PackedParms	parms;
+		u64		dword;
+	} packed;
+	packed.parms.xAckType	= ackType;
+	packed.parms.xAckInd	= ackInd;
+	packed.parms.xRsvd	= 0;
+	packed.parms.xTargetLp	= targetLp;
+	packed.parms.xType	= type;
+	packed.parms.xSubtype	= subtype;
+	packed.parms.xSourceInstId	= sourceInstanceId;
+	packed.parms.xTargetInstId	= targetInstanceId;
+
+	retVal = (HvLpEvent_Rc)HvCall7(HvCallEventSignalLpEventParms,
+			packed.dword, correlationToken, eventData1,eventData2,
+			eventData3,eventData4, eventData5);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
+{
+	u64 abs_addr;
+	HvLpEvent_Rc retVal;
+
+	abs_addr = virt_to_abs(event);
+	retVal = (HvLpEvent_Rc)HvCall1(HvCallEventAckLpEvent, abs_addr);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
+{
+	u64 abs_addr;
+	HvLpEvent_Rc retVal;
+
+	abs_addr = virt_to_abs(event);
+	retVal = (HvLpEvent_Rc)HvCall1(HvCallEventCancelLpEvent, abs_addr);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	HvLpInstanceId retVal;	
+
+	retVal = HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	HvLpInstanceId retVal;	
+
+	retVal = HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
+		HvLpIndex remoteLp, HvLpDma_Direction direction,
+		HvLpInstanceId localInstanceId,
+		HvLpInstanceId remoteInstanceId,
+		HvLpDma_AddressType localAddressType,
+		HvLpDma_AddressType remoteAddressType,
+		/* Do these need to be converted to absolute addresses? */
+		u64 localBufList, u64 remoteBufList, u32 transferLength)
+{
+	HvLpDma_Rc retVal;
+	// Pack the misc bits into a single Dword to pass to PLIC
+	union {
+		struct HvCallEvent_PackedDmaParms	parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.xDirection		= direction;
+	packed.parms.xLocalAddrType	= localAddressType;
+	packed.parms.xRemoteAddrType	= remoteAddressType;
+	packed.parms.xRsvd1		= 0;
+	packed.parms.xRemoteLp		= remoteLp;
+	packed.parms.xType		= type;
+	packed.parms.xRsvd2		= 0;
+	packed.parms.xLocalInstId	= localInstanceId;
+	packed.parms.xRemoteInstId	= remoteInstanceId;
+
+	retVal = (HvLpDma_Rc)HvCall4(HvCallEventDmaBufList,
+			packed.dword, localBufList, remoteBufList,
+			transferLength);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaSingle(HvLpEvent_Type type,
+		HvLpIndex remoteLp, HvLpDma_Direction direction,
+		HvLpInstanceId localInstanceId,
+		HvLpInstanceId remoteInstanceId,
+		HvLpDma_AddressType localAddressType,
+		HvLpDma_AddressType remoteAddressType,
+		u64 localAddrOrTce, u64 remoteAddrOrTce, u32 transferLength)
+{
+	HvLpDma_Rc retVal;
+	// Pack the misc bits into a single Dword to pass to PLIC
+	union {
+		struct HvCallEvent_PackedDmaParms	parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.xDirection		= direction;
+	packed.parms.xLocalAddrType	= localAddressType;
+	packed.parms.xRemoteAddrType	= remoteAddressType;
+	packed.parms.xRsvd1		= 0;
+	packed.parms.xRemoteLp		= remoteLp;
+	packed.parms.xType		= type;
+	packed.parms.xRsvd2		= 0;
+	packed.parms.xLocalInstId	= localInstanceId;
+	packed.parms.xRemoteInstId	= remoteInstanceId;
+
+	retVal = (HvLpDma_Rc)HvCall4(HvCallEventDmaSingle,
+			packed.dword, localAddrOrTce, remoteAddrOrTce,
+			transferLength);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaToSp(void* local, u32 remote,
+		u32 length, HvLpDma_Direction dir)
+{
+	u64 abs_addr;
+	HvLpDma_Rc retVal;
+
+	abs_addr = virt_to_abs(local);
+	retVal = (HvLpDma_Rc)HvCall4(HvCallEventDmaToSp, abs_addr, remote,
+			length, dir);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+
+
+#endif /* _HVCALLEVENT_H */
diff --git a/include/asm-ppc64/iSeries/HvCallHpt.h b/include/asm-ppc64/iSeries/HvCallHpt.h
new file mode 100644
index 000000000000..da769873d18b
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallHpt.h
@@ -0,0 +1,127 @@
+/*
+ * HvCallHpt.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVCALLHPT_H
+#define _HVCALLHPT_H
+
+//============================================================================
+//
+//	This file contains the "hypervisor call" interface which is used to
+//	drive the hypervisor from the OS.
+//
+//============================================================================
+
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/mmu.h>
+
+//-----------------------------------------------------------------------------
+// Constants
+//-----------------------------------------------------------------------------
+
+#define HvCallHptGetHptAddress		HvCallHpt +  0
+#define HvCallHptGetHptPages		HvCallHpt +  1
+#define HvCallHptSetPp			HvCallHpt +  5
+#define HvCallHptSetSwBits		HvCallHpt +  6
+#define HvCallHptUpdate			HvCallHpt +  7
+#define HvCallHptInvalidateNoSyncICache	HvCallHpt +  8
+#define HvCallHptGet			HvCallHpt + 11
+#define HvCallHptFindNextValid		HvCallHpt + 12
+#define HvCallHptFindValid		HvCallHpt + 13
+#define HvCallHptAddValidate		HvCallHpt + 16
+#define HvCallHptInvalidateSetSwBitsGet HvCallHpt + 18
+
+
+//============================================================================
+static inline u64		HvCallHpt_getHptAddress(void)
+{
+	u64 retval = HvCall0(HvCallHptGetHptAddress);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retval;
+}
+//============================================================================
+static inline u64		HvCallHpt_getHptPages(void)
+{	
+	u64 retval = HvCall0(HvCallHptGetHptPages);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retval;
+}
+//=============================================================================
+static inline void		HvCallHpt_setPp(u32 hpteIndex, u8 value)
+{
+	HvCall2( HvCallHptSetPp, hpteIndex, value );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+//=============================================================================
+static inline void		HvCallHpt_setSwBits(u32 hpteIndex, u8 bitson, u8 bitsoff )
+{
+	HvCall3( HvCallHptSetSwBits, hpteIndex, bitson, bitsoff );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+//=============================================================================
+static inline void		HvCallHpt_invalidateNoSyncICache(u32 hpteIndex)
+						
+{
+	HvCall1( HvCallHptInvalidateNoSyncICache, hpteIndex );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+//=============================================================================
+static inline u64		HvCallHpt_invalidateSetSwBitsGet(u32 hpteIndex, u8 bitson, u8 bitsoff )
+						
+{
+	u64 compressedStatus;
+	compressedStatus = HvCall4( HvCallHptInvalidateSetSwBitsGet, hpteIndex, bitson, bitsoff, 1 );
+	HvCall1( HvCallHptInvalidateNoSyncICache, hpteIndex );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return compressedStatus;
+}
+//=============================================================================
+static inline u64		HvCallHpt_findValid( HPTE *hpte, u64 vpn )
+{
+	u64 retIndex = HvCall3Ret16( HvCallHptFindValid, hpte, vpn, 0, 0 );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retIndex;
+}
+//=============================================================================
+static inline u64		HvCallHpt_findNextValid( HPTE *hpte, u32 hpteIndex, u8 bitson, u8 bitsoff )
+{
+	u64 retIndex = HvCall3Ret16( HvCallHptFindNextValid, hpte, hpteIndex, bitson, bitsoff );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retIndex;
+}
+//=============================================================================
+static inline void		HvCallHpt_get( HPTE *hpte, u32 hpteIndex )
+{
+	HvCall2Ret16( HvCallHptGet, hpte, hpteIndex, 0 );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+//============================================================================
+static inline void		HvCallHpt_addValidate( u32 hpteIndex,
+						       u32 hBit,
+						       HPTE *hpte )
+						
+{
+	HvCall4( HvCallHptAddValidate, hpteIndex,
+		 hBit, (*((u64 *)hpte)), (*(((u64 *)hpte)+1)) );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+
+
+//=============================================================================
+
+#endif /* _HVCALLHPT_H */
diff --git a/include/asm-ppc64/iSeries/HvCallPci.h b/include/asm-ppc64/iSeries/HvCallPci.h
new file mode 100644
index 000000000000..6887b619288e
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallPci.h
@@ -0,0 +1,673 @@
+/************************************************************************/
+/* Provides the Hypervisor PCI calls for iSeries Linux Parition.        */
+/* Copyright (C) 2001  <Wayne G Holm> <IBM Corporation>                 */
+/*                                                                      */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation; either version 2 of the License, or    */
+/* (at your option) any later version.                                  */
+/*                                                                      */
+/* This program is distributed in the hope that it will be useful,      */ 
+/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
+/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
+/* GNU General Public License for more details.                         */
+/*                                                                      */
+/* You should have received a copy of the GNU General Public License    */ 
+/* along with this program; if not, write to the:                       */
+/* Free Software Foundation, Inc.,                                      */ 
+/* 59 Temple Place, Suite 330,                                          */ 
+/* Boston, MA  02111-1307  USA                                          */
+/************************************************************************/
+/* Change Activity:                                                     */
+/*   Created, Jan 9, 2001                                               */
+/************************************************************************/
+
+#ifndef _HVCALLPCI_H
+#define _HVCALLPCI_H
+
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+
+/*
+ * DSA == Direct Select Address
+ * this struct must be 64 bits in total
+ */
+struct HvCallPci_DsaAddr {
+	u16		busNumber;		/* PHB index? */
+	u8		subBusNumber; 		/* PCI bus number? */
+	u8		deviceId;     		/* device and function? */
+	u8		barNumber;
+	u8		reserved[3];
+};
+
+union HvDsaMap {
+	u64	DsaAddr;
+	struct HvCallPci_DsaAddr Dsa;
+};
+
+struct HvCallPci_LoadReturn {
+	u64		rc;
+	u64		value;
+};
+
+enum HvCallPci_DeviceType {
+	HvCallPci_NodeDevice	= 1,
+	HvCallPci_SpDevice	= 2,	
+	HvCallPci_IopDevice     = 3,	
+	HvCallPci_BridgeDevice	= 4,	
+	HvCallPci_MultiFunctionDevice = 5,	
+	HvCallPci_IoaDevice	= 6	
+};
+
+
+struct HvCallPci_DeviceInfo {
+	u32	deviceType;		// See DeviceType enum for values
+};
+    
+struct HvCallPci_BusUnitInfo {
+	u32	sizeReturned;		// length of data returned
+	u32	deviceType;		// see DeviceType enum for values
+};
+
+struct HvCallPci_BridgeInfo {
+	struct HvCallPci_BusUnitInfo busUnitInfo;  // Generic bus unit info
+	u8		subBusNumber;		// Bus number of secondary bus
+	u8		maxAgents;		// Max idsels on secondary bus
+        u8              maxSubBusNumber;        // Max Sub Bus
+	u8		logicalSlotNumber;	// Logical Slot Number for IOA 
+};
+    
+
+//  Maximum BusUnitInfo buffer size.  Provided for clients so they can allocate
+//  a buffer big enough for any type of bus unit.  Increase as needed.
+enum {HvCallPci_MaxBusUnitInfoSize = 128};
+
+struct HvCallPci_BarParms {
+	u64		vaddr;
+	u64		raddr;
+	u64		size;
+	u64		protectStart;
+	u64		protectEnd;
+	u64		relocationOffset;
+	u64		pciAddress;		
+	u64		reserved[3];
+};					
+
+enum HvCallPci_VpdType {
+	HvCallPci_BusVpd		= 1,
+	HvCallPci_BusAdapterVpd	= 2
+};
+
+#define HvCallPciConfigLoad8		HvCallPci + 0
+#define HvCallPciConfigLoad16		HvCallPci + 1
+#define HvCallPciConfigLoad32		HvCallPci + 2
+#define HvCallPciConfigStore8		HvCallPci + 3
+#define HvCallPciConfigStore16		HvCallPci + 4
+#define HvCallPciConfigStore32		HvCallPci + 5
+#define HvCallPciEoi			HvCallPci + 16
+#define HvCallPciGetBarParms		HvCallPci + 18
+#define HvCallPciMaskFisr		HvCallPci + 20
+#define HvCallPciUnmaskFisr		HvCallPci + 21
+#define HvCallPciSetSlotReset		HvCallPci + 25
+#define HvCallPciGetDeviceInfo		HvCallPci + 27
+#define HvCallPciGetCardVpd		HvCallPci + 28
+#define HvCallPciBarLoad8		HvCallPci + 40
+#define HvCallPciBarLoad16		HvCallPci + 41
+#define HvCallPciBarLoad32		HvCallPci + 42
+#define HvCallPciBarLoad64		HvCallPci + 43
+#define HvCallPciBarStore8		HvCallPci + 44
+#define HvCallPciBarStore16		HvCallPci + 45
+#define HvCallPciBarStore32		HvCallPci + 46
+#define HvCallPciBarStore64		HvCallPci + 47
+#define HvCallPciMaskInterrupts		HvCallPci + 48
+#define HvCallPciUnmaskInterrupts	HvCallPci + 49
+#define HvCallPciGetBusUnitInfo		HvCallPci + 50
+
+//============================================================================
+static inline u64 HvCallPci_configLoad8(u16 busNumber, u8 subBusNumber,
+					u8 deviceId, u32 offset,
+					u8 *value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	HvCall3Ret16(HvCallPciConfigLoad8, &retVal, *(u64 *)&dsa, offset, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*value = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64 HvCallPci_configLoad16(u16 busNumber, u8 subBusNumber,
+					 u8 deviceId, u32 offset,
+					 u16 *value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	HvCall3Ret16(HvCallPciConfigLoad16, &retVal, *(u64 *)&dsa, offset, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*value = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_configLoad32(u16 busNumber, u8 subBusNumber,
+					      u8 deviceId, u32 offset,
+					      u32 *value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	HvCall3Ret16(HvCallPciConfigLoad32, &retVal, *(u64 *)&dsa, offset, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*value = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_configStore8(u16 busNumber, u8 subBusNumber,
+					      u8 deviceId, u32 offset,
+					      u8  value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	retVal = HvCall4(HvCallPciConfigStore8, *(u64 *)&dsa, offset, value, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_configStore16(u16 busNumber, u8 subBusNumber,
+					      u8 deviceId, u32 offset,
+					      u16  value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	retVal = HvCall4(HvCallPciConfigStore16, *(u64 *)&dsa, offset, value, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_configStore32(u16 busNumber, u8 subBusNumber,
+					      u8 deviceId, u32 offset,
+					      u32  value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	retVal = HvCall4(HvCallPciConfigStore32, *(u64 *)&dsa, offset, value, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_barLoad8(u16	busNumberParm,
+					   u8		subBusParm,
+					   u8		deviceIdParm,
+					   u8		barNumberParm,
+					   u64		offsetParm,
+					   u8*		valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	HvCall3Ret16(HvCallPciBarLoad8, &retVal, *(u64 *)&dsa, offsetParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*valueParm = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_barLoad16(u16	busNumberParm,
+					   u8		subBusParm,
+					   u8		deviceIdParm,
+					   u8		barNumberParm,
+					   u64		offsetParm,
+					   u16*		valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	HvCall3Ret16(HvCallPciBarLoad16, &retVal, *(u64 *)&dsa, offsetParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*valueParm = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_barLoad32(u16	busNumberParm,
+					   u8		subBusParm,
+					   u8		deviceIdParm,
+					   u8		barNumberParm,
+					   u64		offsetParm,
+					   u32*		valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	HvCall3Ret16(HvCallPciBarLoad32, &retVal, *(u64 *)&dsa, offsetParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*valueParm = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_barLoad64(u16	busNumberParm,
+					   u8		subBusParm,
+					   u8		deviceIdParm,
+					   u8		barNumberParm,
+					   u64		offsetParm,
+					   u64*		valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;				
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	HvCall3Ret16(HvCallPciBarLoad64, &retVal, *(u64 *)&dsa, offsetParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	*valueParm = retVal.value;
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_barStore8(u16	busNumberParm,
+					    u8		subBusParm,
+					    u8		deviceIdParm,
+					    u8		barNumberParm,
+					    u64		offsetParm,
+					    u8		valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+				
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	retVal = HvCall4(HvCallPciBarStore8, *(u64 *)&dsa, offsetParm, valueParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_barStore16(u16	busNumberParm,
+					     u8		subBusParm,
+					     u8		deviceIdParm,
+					     u8		barNumberParm,
+					     u64	offsetParm,
+					     u16	valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+				
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	retVal = HvCall4(HvCallPciBarStore16, *(u64 *)&dsa, offsetParm, valueParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_barStore32(u16	busNumberParm,
+					     u8		subBusParm,
+					     u8		deviceIdParm,
+					     u8		barNumberParm,
+					     u64	offsetParm,
+					     u32	valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+				
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	retVal = HvCall4(HvCallPciBarStore32, *(u64 *)&dsa, offsetParm, valueParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_barStore64(u16	busNumberParm,
+					     u8		subBusParm,
+					     u8		deviceIdParm,
+					     u8		barNumberParm,
+					     u64	offsetParm,
+					     u64	valueParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+				
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	retVal = HvCall4(HvCallPciBarStore64, *(u64 *)&dsa, offsetParm, valueParm, 0);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_eoi(u16	busNumberParm,
+				      u8	subBusParm,  
+				      u8	deviceIdParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	HvCall1Ret16(HvCallPciEoi, &retVal, *(u64*)&dsa);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal.rc;
+}
+//============================================================================
+static inline u64	HvCallPci_getBarParms(u16	busNumberParm,
+					      u8	subBusParm,  
+					      u8	deviceIdParm,
+					      u8	barNumberParm,
+					      u64	parms,
+					      u32	sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	retVal = HvCall3(HvCallPciGetBarParms, *(u64*)&dsa, parms, sizeofParms);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_maskFisr(u16	busNumberParm,
+					   u8	subBusParm,  
+					   u8	deviceIdParm,
+					   u64	fisrMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;		
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall2(HvCallPciMaskFisr, *(u64*)&dsa, fisrMask);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_unmaskFisr(u16	busNumberParm,
+					     u8		subBusParm,  
+					     u8		deviceIdParm,
+					     u64	fisrMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;		
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall2(HvCallPciUnmaskFisr, *(u64*)&dsa, fisrMask);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_setSlotReset(u16		busNumberParm,
+					       u8		subBusParm,
+					       u8		deviceIdParm,
+					       u64		onNotOff)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall2(HvCallPciSetSlotReset, *(u64*)&dsa, onNotOff);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_getDeviceInfo(u16	busNumberParm,
+						u8	subBusParm,  
+						u8	deviceNumberParm,
+						u64     parms,
+						u32	sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceNumberParm << 4;
+
+	retVal = HvCall3(HvCallPciGetDeviceInfo, *(u64*)&dsa, parms, sizeofParms);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_maskInterrupts(u16	busNumberParm,
+						 u8	subBusParm,  
+						 u8	deviceIdParm,
+						 u64	interruptMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;		
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall2(HvCallPciMaskInterrupts, *(u64*)&dsa, interruptMask);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+static inline u64	HvCallPci_unmaskInterrupts(u16	busNumberParm,
+						 u8		subBusParm,  
+						 u8		deviceIdParm,
+						 u64		interruptMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;		
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall2(HvCallPciUnmaskInterrupts, *(u64*)&dsa, interruptMask);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+
+static inline u64	HvCallPci_getBusUnitInfo(u16		busNumberParm,
+						 u8		subBusParm,  
+						 u8		deviceIdParm,
+						 u64            parms,
+						 u32		sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+	u64 retVal;
+
+	*((u64*)&dsa) = 0;		
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	retVal = HvCall3(HvCallPciGetBusUnitInfo, *(u64*)&dsa, parms, sizeofParms);
+
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+
+	return retVal;
+}
+//============================================================================
+
+static inline int HvCallPci_getBusVpd(u16 busNumParm, u64 destParm, u16 sizeParm)
+{
+	int xRetSize;
+	u64 xRc = HvCall4(HvCallPciGetCardVpd, busNumParm, destParm, sizeParm, HvCallPci_BusVpd);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	if (xRc == -1)
+		xRetSize = -1;
+	else
+		xRetSize = xRc & 0xFFFF;
+	return xRetSize;
+}
+//============================================================================
+
+static inline int HvCallPci_getBusAdapterVpd(u16 busNumParm, u64 destParm, u16 sizeParm)
+{
+	int xRetSize;
+	u64 xRc = HvCall4(HvCallPciGetCardVpd, busNumParm, destParm, sizeParm, HvCallPci_BusAdapterVpd);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	if (xRc == -1)
+		xRetSize = -1;
+	else
+		xRetSize = xRc & 0xFFFF;
+	return xRetSize;
+}
+//============================================================================
+#endif /* _HVCALLPCI_H */
diff --git a/include/asm-ppc64/iSeries/HvCallSc.h b/include/asm-ppc64/iSeries/HvCallSc.h
new file mode 100644
index 000000000000..eea258447642
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallSc.h
@@ -0,0 +1,51 @@
+/*
+ * HvCallSc.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVCALLSC_H
+#define _HVCALLSC_H
+
+#include <asm/iSeries/HvTypes.h>
+
+#define HvCallBase		0x8000000000000000ul
+#define HvCallCc		0x8001000000000000ul
+#define HvCallCfg		0x8002000000000000ul
+#define HvCallEvent		0x8003000000000000ul
+#define HvCallHpt		0x8004000000000000ul
+#define HvCallPci		0x8005000000000000ul
+#define HvCallSm		0x8007000000000000ul
+#define HvCallXm		0x8009000000000000ul
+
+u64 HvCall0( u64 );
+u64 HvCall1( u64, u64 );
+u64 HvCall2( u64, u64, u64 );
+u64 HvCall3( u64, u64, u64, u64 );
+u64 HvCall4( u64, u64, u64, u64, u64 );
+u64 HvCall5( u64, u64, u64, u64, u64, u64 );
+u64 HvCall6( u64, u64, u64, u64, u64, u64, u64 );
+u64 HvCall7( u64, u64, u64, u64, u64, u64, u64, u64 );
+
+u64 HvCall0Ret16( u64, void * );
+u64 HvCall1Ret16( u64, void *, u64 );
+u64 HvCall2Ret16( u64, void *, u64, u64 );
+u64 HvCall3Ret16( u64, void *, u64, u64, u64 );
+u64 HvCall4Ret16( u64, void *, u64, u64, u64, u64 );
+u64 HvCall5Ret16( u64, void *, u64, u64, u64, u64, u64 );
+u64 HvCall6Ret16( u64, void *, u64, u64, u64, u64, u64, u64 );
+u64 HvCall7Ret16( u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64 );
+
+#endif /* _HVCALLSC_H */
diff --git a/include/asm-ppc64/iSeries/HvCallSm.h b/include/asm-ppc64/iSeries/HvCallSm.h
new file mode 100644
index 000000000000..9050c94a529d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallSm.h
@@ -0,0 +1,52 @@
+/*
+ * HvCallSm.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVCALLSM_H
+#define _HVCALLSM_H
+
+//============================================================================
+//
+//	This file contains the "hypervisor call" interface which is used to
+//	drive the hypervisor from the OS.
+//
+//============================================================================
+
+//-------------------------------------------------------------------
+// Standard Includes
+//-------------------------------------------------------------------
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+
+//-----------------------------------------------------------------------------
+// Constants
+//-----------------------------------------------------------------------------
+
+#define HvCallSmGet64BitsOfAccessMap	HvCallSm  + 11
+
+
+//============================================================================
+static inline u64		HvCallSm_get64BitsOfAccessMap(
+					HvLpIndex lpIndex, u64 indexIntoBitMap )
+{
+	u64 retval = HvCall2(HvCallSmGet64BitsOfAccessMap, lpIndex,
+			     indexIntoBitMap );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retval;
+}
+//============================================================================
+#endif /* _HVCALLSM_H */
diff --git a/include/asm-ppc64/iSeries/HvCallXm.h b/include/asm-ppc64/iSeries/HvCallXm.h
new file mode 100644
index 000000000000..bfb898f4db8d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvCallXm.h
@@ -0,0 +1,95 @@
+//============================================================================
+//							 Header File Id
+// Name______________:	HvCallXm.H
+//
+// Description_______:
+//
+//	This file contains the "hypervisor call" interface which is used to
+//	drive the hypervisor from SLIC.
+//
+//============================================================================
+#ifndef _HVCALLXM_H
+#define _HVCALLXM_H
+
+//-------------------------------------------------------------------
+// Forward declarations 
+//-------------------------------------------------------------------
+
+//-------------------------------------------------------------------
+// Standard Includes
+//-------------------------------------------------------------------
+#include <asm/iSeries/HvCallSc.h>
+#include <asm/iSeries/HvTypes.h>
+
+//-----------------------------------------------------------------------------
+// Constants
+//-----------------------------------------------------------------------------
+
+#define HvCallXmGetTceTableParms	HvCallXm +  0
+#define HvCallXmTestBus			HvCallXm +  1
+#define HvCallXmConnectBusUnit		HvCallXm +  2
+#define HvCallXmLoadTod			HvCallXm +  8
+#define HvCallXmTestBusUnit		HvCallXm +  9
+#define HvCallXmSetTce			HvCallXm + 11
+#define HvCallXmSetTces			HvCallXm + 13
+
+
+
+//============================================================================
+static inline void		HvCallXm_getTceTableParms(u64 cb)
+{
+	HvCall1(HvCallXmGetTceTableParms, cb);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+}
+//============================================================================
+static inline u64		HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
+{	
+	u64 retval = HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retval;
+}
+//============================================================================
+static inline u64		HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
+{	
+	u64 retval = HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
+			     tce1, tce2, tce3, tce4 );
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retval;
+}
+//=============================================================================
+static inline u64	HvCallXm_testBus(u16 busNumber)
+{
+	u64 retVal = HvCall1(HvCallXmTestBus, busNumber);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//=====================================================================================
+static inline u64	HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, u8 deviceId)
+{
+	u64 busUnitNumber = (subBusNumber << 8) | deviceId;
+	u64 retVal = HvCall2(HvCallXmTestBusUnit, busNumber, busUnitNumber);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//=====================================================================================
+static inline u64	HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, u8 deviceId,
+						u64 interruptToken)
+{
+	u64 busUnitNumber = (subBusNumber << 8) | deviceId;
+	u64 queueIndex = 0; // HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard));  
+
+	u64 retVal = HvCall5(HvCallXmConnectBusUnit, busNumber, busUnitNumber,
+			     interruptToken, 0, queueIndex);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//=====================================================================================
+static inline u64	HvCallXm_loadTod(void)
+{
+	u64 retVal = HvCall0(HvCallXmLoadTod);
+	// getPaca()->adjustHmtForNoOfSpinLocksHeld();
+	return retVal;
+}
+//=====================================================================================
+
+#endif /* _HVCALLXM_H */
diff --git a/include/asm-ppc64/iSeries/HvLpConfig.h b/include/asm-ppc64/iSeries/HvLpConfig.h
new file mode 100644
index 000000000000..bdbd70f42c9d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvLpConfig.h
@@ -0,0 +1,280 @@
+/*
+ * HvLpConfig.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVLPCONFIG_H
+#define _HVLPCONFIG_H
+
+//===========================================================================
+//
+//      This file contains the interface to the LPAR configuration data
+//  to determine which resources should be allocated to each partition.
+//
+//===========================================================================
+
+#include <asm/iSeries/HvCallCfg.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/ItLpNaca.h>
+#include <asm/iSeries/LparData.h>
+
+//-------------------------------------------------------------------
+// Constants
+//-------------------------------------------------------------------
+
+extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
+
+//===================================================================
+static inline HvLpIndex	HvLpConfig_getLpIndex(void)
+{
+	return itLpNaca.xLpIndex;
+}
+//===================================================================
+static inline HvLpIndex	HvLpConfig_getPrimaryLpIndex(void)
+{
+	return itLpNaca.xPrimaryLpIndex;
+}
+//=================================================================
+static inline HvLpIndex	HvLpConfig_getLps(void)
+{
+	return HvCallCfg_getLps();
+}
+//=================================================================
+static inline HvLpIndexMap	HvLpConfig_getActiveLpMap(void)
+{
+	return HvCallCfg_getActiveLpMap();
+}
+//=================================================================
+static inline u64		HvLpConfig_getSystemMsMegs(void)
+{
+	return HvCallCfg_getSystemMsChunks() / HVCHUNKSPERMEG;
+}
+//=================================================================
+static inline u64		HvLpConfig_getSystemMsChunks(void)
+{
+	return HvCallCfg_getSystemMsChunks();
+}
+//=================================================================
+static inline u64		HvLpConfig_getSystemMsPages(void)
+{
+	return HvCallCfg_getSystemMsChunks() * HVPAGESPERCHUNK;
+}
+//================================================================
+static inline u64		HvLpConfig_getMsMegs(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Cur) / HVCHUNKSPERMEG;
+}
+//================================================================
+static inline u64		HvLpConfig_getMsChunks(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Cur);
+}
+//================================================================
+static inline u64		HvLpConfig_getMsPages(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Cur) * HVPAGESPERCHUNK;
+}
+//================================================================
+static inline u64		HvLpConfig_getMinMsMegs(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Min) / HVCHUNKSPERMEG;
+}
+//================================================================
+static inline u64		HvLpConfig_getMinMsChunks(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Min);
+}
+//================================================================
+static inline u64		HvLpConfig_getMinMsPages(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Min) * HVPAGESPERCHUNK;
+}
+//================================================================
+static inline u64		HvLpConfig_getMinRuntimeMsMegs(void)
+{
+	return HvCallCfg_getMinRuntimeMsChunks(HvLpConfig_getLpIndex()) / HVCHUNKSPERMEG;
+}
+//===============================================================
+static inline u64		HvLpConfig_getMinRuntimeMsChunks(void)
+{
+	return HvCallCfg_getMinRuntimeMsChunks(HvLpConfig_getLpIndex());
+}
+//===============================================================
+static inline u64		HvLpConfig_getMinRuntimeMsPages(void)
+{
+	return HvCallCfg_getMinRuntimeMsChunks(HvLpConfig_getLpIndex()) * HVPAGESPERCHUNK;
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxMsMegs(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Max) / HVCHUNKSPERMEG;
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxMsChunks(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Max);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxMsPages(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Max) * HVPAGESPERCHUNK;
+}
+//===============================================================
+static inline u64		HvLpConfig_getInitMsMegs(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Init) / HVCHUNKSPERMEG;
+}
+//===============================================================
+static inline u64		HvLpConfig_getInitMsChunks(void)
+{
+	return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Init);
+}
+//===============================================================
+static inline u64		HvLpConfig_getInitMsPages(void)
+{    return HvCallCfg_getMsChunks(HvLpConfig_getLpIndex(),HvCallCfg_Init) * HVPAGESPERCHUNK;
+}
+//===============================================================
+static inline u64		HvLpConfig_getSystemPhysicalProcessors(void)
+{
+	return HvCallCfg_getSystemPhysicalProcessors();
+}
+//===============================================================
+static inline u64		HvLpConfig_getSystemLogicalProcessors(void)
+{
+	return HvCallCfg_getSystemPhysicalProcessors() * (/*getPaca()->getSecondaryThreadCount() +*/ 1);
+}
+//===============================================================
+static inline u64		HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
+{
+	return HvCallCfg_getNumProcsInSharedPool(sPI);
+}
+//===============================================================
+static inline u64		HvLpConfig_getPhysicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Cur);
+}
+//===============================================================
+static inline u64		HvLpConfig_getLogicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Cur) * (/*getPaca()->getSecondaryThreadCount() +*/ 1);
+}
+//===============================================================
+static inline HvLpSharedPoolIndex	HvLpConfig_getSharedPoolIndex(void)
+{
+	return HvCallCfg_getSharedPoolIndex(HvLpConfig_getLpIndex());
+}
+//===============================================================
+static inline u64		HvLpConfig_getSharedProcUnits(void)
+{
+	return HvCallCfg_getSharedProcUnits(HvLpConfig_getLpIndex(),HvCallCfg_Cur);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMinSharedProcUnits(void)
+{
+	return HvCallCfg_getSharedProcUnits(HvLpConfig_getLpIndex(),HvCallCfg_Min);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxSharedProcUnits(void)
+{
+	return HvCallCfg_getSharedProcUnits(HvLpConfig_getLpIndex(),HvCallCfg_Max);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMinPhysicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Min);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMinLogicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Min) * (/*getPaca()->getSecondaryThreadCount() +*/ 1);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxPhysicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Max);
+}
+//===============================================================
+static inline u64		HvLpConfig_getMaxLogicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Max) * (/*getPaca()->getSecondaryThreadCount() +*/ 1);
+}
+//===============================================================
+static inline u64		HvLpConfig_getInitPhysicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Init);
+}
+//===============================================================
+static inline u64		HvLpConfig_getInitLogicalProcessors(void)
+{
+	return HvCallCfg_getPhysicalProcessors(HvLpConfig_getLpIndex(),HvCallCfg_Init) * (/*getPaca()->getSecondaryThreadCount() +*/ 1);
+}
+//================================================================
+static inline HvLpVirtualLanIndexMap	HvLpConfig_getVirtualLanIndexMap(void)
+{
+	return HvCallCfg_getVirtualLanIndexMap(HvLpConfig_getLpIndex_outline());
+}
+//===============================================================
+static inline HvLpVirtualLanIndexMap	HvLpConfig_getVirtualLanIndexMapForLp(HvLpIndex lp)
+{
+	return HvCallCfg_getVirtualLanIndexMap(lp);
+}
+//================================================================
+static inline HvLpIndex	HvLpConfig_getBusOwner(HvBusNumber busNumber)
+{
+	return HvCallCfg_getBusOwner(busNumber);
+}
+//===============================================================
+static inline int		HvLpConfig_isBusDedicated(HvBusNumber busNumber)
+{
+	return HvCallCfg_isBusDedicated(busNumber);
+}
+//================================================================
+static inline HvLpIndexMap	HvLpConfig_getBusAllocation(HvBusNumber busNumber)
+{
+	return HvCallCfg_getBusAllocation(busNumber);
+}
+//================================================================
+// returns the absolute real address of the load area
+static inline u64		HvLpConfig_getLoadAddress(void)
+{
+	return itLpNaca.xLoadAreaAddr & 0x7fffffffffffffff;
+}
+//================================================================
+static inline u64		HvLpConfig_getLoadPages(void)
+{
+	return itLpNaca.xLoadAreaChunks * HVPAGESPERCHUNK;
+}
+//================================================================
+static inline int		HvLpConfig_isBusOwnedByThisLp(HvBusNumber busNumber)
+{
+	HvLpIndex busOwner = HvLpConfig_getBusOwner(busNumber);
+	return (busOwner == HvLpConfig_getLpIndex());
+}
+//================================================================
+static inline int         HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, HvLpIndex lp2)
+{
+	HvLpVirtualLanIndexMap virtualLanIndexMap1 = HvCallCfg_getVirtualLanIndexMap( lp1 );
+	HvLpVirtualLanIndexMap virtualLanIndexMap2 = HvCallCfg_getVirtualLanIndexMap( lp2 );
+	return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
+}
+//================================================================
+static inline HvLpIndex		HvLpConfig_getHostingLpIndex(HvLpIndex lp)
+{
+	return HvCallCfg_getHostingLpIndex(lp);
+}
+//================================================================
+
+#endif /* _HVLPCONFIG_H */
diff --git a/include/asm-ppc64/iSeries/HvLpEvent.h b/include/asm-ppc64/iSeries/HvLpEvent.h
new file mode 100644
index 000000000000..30936e433064
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvLpEvent.h
@@ -0,0 +1,144 @@
+/*
+ * HvLpEvent.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+//======================================================================
+//
+//	This file contains the class for HV events in the system.
+//
+//=====================================================================
+#ifndef _HVLPEVENT_H
+#define _HVLPEVENT_H
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvCallEvent.h>
+
+//=====================================================================
+//
+// HvLpEvent is the structure for Lp Event messages passed between
+// partitions through PLIC. 
+//
+//=====================================================================
+
+struct HvEventFlags
+{
+	u8	xValid:1;		// Indicates a valid request	x00-x00
+	u8	xRsvd1:4;		// Reserved			...
+	u8	xAckType:1;		// Immediate or deferred	...
+	u8	xAckInd:1;		// Indicates if ACK required	...
+	u8	xFunction:1;		// Interrupt or Acknowledge	...
+};
+
+
+struct HvLpEvent
+{
+	struct HvEventFlags xFlags;	// Event flags			x00-x00
+	u8	xType;			// Type of message		x01-x01
+	u16	xSubtype;		// Subtype for event		x02-x03
+	u8	xSourceLp;		// Source LP			x04-x04
+	u8	xTargetLp;		// Target LP			x05-x05
+	u8	xSizeMinus1;		// Size of Derived class - 1	x06-x06
+	u8	xRc;			// RC for Ack flows		x07-x07
+	u16	xSourceInstanceId;	// Source sides instance id	x08-x09
+	u16	xTargetInstanceId;	// Target sides instance id	x0A-x0B
+	union {
+		u32	xSubtypeData;	// Data usable by the subtype	x0C-x0F
+		u16	xSubtypeDataShort[2];	// Data as 2 shorts
+		u8	xSubtypeDataChar[4];	// Data as 4 chars
+	} x;
+
+	u64	xCorrelationToken;	// Unique value for source/type x10-x17
+};
+
+// Lp Event handler function
+typedef void (*LpEventHandler)(struct HvLpEvent *, struct pt_regs *);
+
+// Register a handler for an event type
+//  returns 0 on success
+extern int HvLpEvent_registerHandler( HvLpEvent_Type eventType, LpEventHandler hdlr);
+
+// Unregister a handler for an event type
+//  This call will sleep until the handler being removed is guaranteed to
+//  be no longer executing on any CPU. Do not call with locks held.
+//
+//  returns 0 on success
+//  Unregister will fail if there are any paths open for the type
+extern int HvLpEvent_unregisterHandler( HvLpEvent_Type eventType );
+
+// Open an Lp Event Path for an event type
+//  returns 0 on success
+//  openPath will fail if there is no handler registered for the event type.
+//  The lpIndex specified is the partition index for the target partition
+//  (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) 
+extern int HvLpEvent_openPath( HvLpEvent_Type eventType, HvLpIndex lpIndex );
+
+
+// Close an Lp Event Path for a type and partition
+//  returns 0 on sucess
+extern int HvLpEvent_closePath( HvLpEvent_Type eventType, HvLpIndex lpIndex );
+
+#define HvLpEvent_Type_Hypervisor 0
+#define HvLpEvent_Type_MachineFac 1
+#define HvLpEvent_Type_SessionMgr 2
+#define HvLpEvent_Type_SpdIo      3
+#define HvLpEvent_Type_VirtualBus 4
+#define HvLpEvent_Type_PciIo      5
+#define HvLpEvent_Type_RioIo      6
+#define HvLpEvent_Type_VirtualLan 7
+#define HvLpEvent_Type_VirtualIo  8
+#define HvLpEvent_Type_NumTypes   9
+
+#define HvLpEvent_Rc_Good 0
+#define HvLpEvent_Rc_BufferNotAvailable 1
+#define HvLpEvent_Rc_Cancelled 2
+#define HvLpEvent_Rc_GenericError 3
+#define HvLpEvent_Rc_InvalidAddress 4
+#define HvLpEvent_Rc_InvalidPartition 5
+#define HvLpEvent_Rc_InvalidSize 6
+#define HvLpEvent_Rc_InvalidSubtype 7
+#define HvLpEvent_Rc_InvalidSubtypeData 8
+#define HvLpEvent_Rc_InvalidType 9
+#define HvLpEvent_Rc_PartitionDead 10
+#define HvLpEvent_Rc_PathClosed 11
+#define HvLpEvent_Rc_SubtypeError 12
+
+#define HvLpEvent_Function_Ack 0
+#define HvLpEvent_Function_Int 1
+
+#define HvLpEvent_AckInd_NoAck 0
+#define HvLpEvent_AckInd_DoAck 1
+
+#define HvLpEvent_AckType_ImmediateAck 0
+#define HvLpEvent_AckType_DeferredAck 1
+
+#define HvLpDma_Direction_LocalToRemote 0
+#define HvLpDma_Direction_RemoteToLocal 1
+
+#define HvLpDma_AddressType_TceIndex 0
+#define HvLpDma_AddressType_RealAddress 1
+
+#define HvLpDma_Rc_Good 0
+#define HvLpDma_Rc_Error 1
+#define HvLpDma_Rc_PartitionDead 2
+#define HvLpDma_Rc_PathClosed 3
+#define HvLpDma_Rc_InvalidAddress 4
+#define HvLpDma_Rc_InvalidLength 5
+
+#endif // _HVLPEVENT_H
diff --git a/include/asm-ppc64/iSeries/HvReleaseData.h b/include/asm-ppc64/iSeries/HvReleaseData.h
new file mode 100644
index 000000000000..183e5e738c26
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvReleaseData.h
@@ -0,0 +1,65 @@
+/*
+ * HvReleaseData.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVRELEASEDATA_H
+#define _HVRELEASEDATA_H
+
+//=============================================================================
+//
+//   This control block contains the critical information about the 
+//   release so that it can be changed in the future (ie, the virtual 
+//   address of the OS's NACA).
+//
+#include <asm/types.h>
+#include <asm/naca.h>
+
+//=============================================================================
+//
+//	When we IPL a secondary partition, we will check if if the 
+//	secondary xMinPlicVrmIndex > the primary xVrmIndex.  
+//	If it is then this tells PLIC that this secondary is not 
+//	supported running on this "old" of a level of PLIC.
+//
+//	Likewise, we will compare the primary xMinSlicVrmIndex to 
+//	the secondary xVrmIndex. 
+//	If the primary xMinSlicVrmDelta > secondary xVrmDelta then we 
+//	know that this PLIC does not support running an OS "that old".
+//
+//=============================================================================
+
+struct	HvReleaseData
+{
+	u32	xDesc;			// Descriptor	"HvRD" ebcdic	x00-x03
+	u16	xSize;			// Size of this control block	x04-x05
+	u16	xVpdAreasPtrOffset;	// Offset in NACA of ItVpdAreas	x06-x07
+	struct  naca_struct * xSlicNacaAddr; // Virt addr of SLIC NACA  x08-x0F
+	u32	xMsNucDataOffset;	// Offset of Linux Mapping Data x10-x13
+	u32	xRsvd1;			// Reserved			x14-x17
+	u16	xTagsMode:1;		// 0 == tags active, 1 == tags inactive
+	u16	xAddressSize:1;		// 0 == 64-bit, 1 == 32-bit
+	u16	xNoSharedProcs:1;	// 0 == shared procs, 1 == no shared
+	u16	xNoHMT:1;		// 0 == allow HMT, 1 == no HMT
+	u16	xRsvd2:12;		// Reserved			x18-x19
+	u16	xVrmIndex;		// VRM Index of OS image	x1A-x1B
+	u16	xMinSupportedPlicVrmIndex;// Min PLIC level  (soft)	x1C-x1D
+	u16	xMinCompatablePlicVrmIndex;// Min PLIC levelP (hard)	x1E-x1F
+	char	xVrmName[12];		// Displayable name  		x20-x2B
+	char	xRsvd3[20];		// Reserved			x2C-x3F
+};
+
+#endif /* _HVRELEASEDATA_H */
diff --git a/include/asm-ppc64/iSeries/HvTypes.h b/include/asm-ppc64/iSeries/HvTypes.h
new file mode 100644
index 000000000000..3ec49c1aec32
--- /dev/null
+++ b/include/asm-ppc64/iSeries/HvTypes.h
@@ -0,0 +1,127 @@
+/*
+ * HvTypes.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _HVTYPES_H
+#define _HVTYPES_H
+
+//===========================================================================
+//                                                             Header File Id
+// Name______________:  HvTypes.H
+//
+// Description_______:
+//
+//	General typedefs for the hypervisor.
+//
+// Declared Class(es):
+//
+//===========================================================================
+
+#include <asm/types.h>
+
+//-------------------------------------------------------------------
+// Typedefs
+//-------------------------------------------------------------------
+typedef u8	HvLpIndex;
+typedef u16	HvLpInstanceId;
+typedef u64     HvLpTOD;
+typedef u64     HvLpSystemSerialNum;
+typedef u8      HvLpDeviceSerialNum[12];
+typedef u16     HvLpSanHwSet;
+typedef u16     HvLpBus;
+typedef u16     HvLpBoard;
+typedef u16     HvLpCard;
+typedef u8      HvLpDeviceType[4];
+typedef u8      HvLpDeviceModel[3];
+typedef u64     HvIoToken;
+typedef u8      HvLpName[8];
+typedef u32	HvIoId;
+typedef u64	HvRealMemoryIndex;
+typedef u32     HvLpIndexMap;		// Must hold HvMaxArchitectedLps bits!!!
+typedef u16	HvLpVrmIndex;
+typedef u32	HvXmGenerationId;
+typedef u8	HvLpBusPool;			
+typedef u8	HvLpSharedPoolIndex;		
+typedef u16	HvLpSharedProcUnitsX100;
+typedef u8	HvLpVirtualLanIndex;
+typedef u16	HvLpVirtualLanIndexMap;	// Must hold HvMaxArchitectedVirtualLans bits!!!
+typedef u16	HvBusNumber;		// Hypervisor Bus Number
+typedef u8	HvSubBusNumber;		// Hypervisor SubBus Number
+typedef u8	HvAgentId;		// Hypervisor DevFn
+
+
+#define HVMAXARCHITECTEDLPS 32
+#define HVMAXARCHITECTEDVIRTUALLANS 16
+#define HVMAXARCHITECTEDVIRTUALDISKS 32
+#define HVMAXARCHITECTEDVIRTUALCDROMS 8
+#define HVMAXARCHITECTEDVIRTUALTAPES 8
+#define HVCHUNKSIZE 256 * 1024
+#define HVPAGESIZE 4 * 1024
+#define HVLPMINMEGSPRIMARY 256
+#define HVLPMINMEGSSECONDARY 64
+#define HVCHUNKSPERMEG 4
+#define HVPAGESPERMEG 256
+#define HVPAGESPERCHUNK 64
+ 
+#define HvMaxArchitectedLps 		((HvLpIndex)HVMAXARCHITECTEDLPS)
+#define HvMaxArchitectedVirtualLans	((HvLpVirtualLanIndex)16)
+#define HvLpIndexInvalid		((HvLpIndex)0xff)
+
+//--------------------------------------------------------------------
+// Enums for the sub-components under PLIC
+// Used in HvCall  and HvPrimaryCall
+//--------------------------------------------------------------------
+enum   HvCallCompIds
+{
+	HvCallCompId = 0,
+	HvCallCpuCtlsCompId = 1,
+	HvCallCfgCompId = 2,
+	HvCallEventCompId = 3,
+	HvCallHptCompId = 4,
+	HvCallPciCompId = 5,
+	HvCallSlmCompId = 6,
+	HvCallSmCompId = 7,
+	HvCallSpdCompId = 8,
+	HvCallXmCompId = 9,
+	HvCallRioCompId = 10, 
+	HvCallRsvd3CompId = 11,
+	HvCallRsvd2CompId = 12,
+	HvCallRsvd1CompId = 13,
+	HvCallMaxCompId = 14,
+	HvPrimaryCallCompId = 0,    
+	HvPrimaryCallCfgCompId = 1,
+	HvPrimaryCallPciCompId = 2,    
+	HvPrimaryCallSmCompId = 3,
+	HvPrimaryCallSpdCompId = 4,
+	HvPrimaryCallXmCompId = 5,
+	HvPrimaryCallRioCompId = 6, 
+	HvPrimaryCallRsvd7CompId = 7,
+	HvPrimaryCallRsvd6CompId = 8,
+	HvPrimaryCallRsvd5CompId = 9,
+	HvPrimaryCallRsvd4CompId = 10,
+	HvPrimaryCallRsvd3CompId = 11,
+	HvPrimaryCallRsvd2CompId = 12,
+	HvPrimaryCallRsvd1CompId = 13,
+	HvPrimaryCallMaxCompId = HvCallMaxCompId     
+};
+
+struct HvLpBufferList {
+	u64 addr;
+	u64 len;
+};
+
+#endif /* _HVTYPES_H */
diff --git a/include/asm-ppc64/iSeries/IoHriMainStore.h b/include/asm-ppc64/iSeries/IoHriMainStore.h
new file mode 100644
index 000000000000..ff00e865f620
--- /dev/null
+++ b/include/asm-ppc64/iSeries/IoHriMainStore.h
@@ -0,0 +1,167 @@
+/*
+ * IoHriMainStore.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _IOHRIMAINSTORE_H
+#define _IOHRIMAINSTORE_H
+
+/* Main Store Vpd for Condor,iStar,sStar */
+struct IoHriMainStoreSegment4 {    
+	u8	msArea0Exists:1;
+	u8	msArea1Exists:1;
+	u8	msArea2Exists:1;
+	u8	msArea3Exists:1;
+	u8	reserved1:4;
+	u8	reserved2;
+
+	u8	msArea0Functional:1;
+	u8	msArea1Functional:1;
+	u8	msArea2Functional:1;
+	u8	msArea3Functional:1;
+	u8	reserved3:4;
+	u8	reserved4;
+
+	u32	totalMainStore;
+
+	u64	msArea0Ptr;
+	u64	msArea1Ptr;
+	u64	msArea2Ptr;
+	u64	msArea3Ptr;
+
+	u32	cardProductionLevel;
+
+	u32	msAdrHole;
+
+	u8	msArea0HasRiserVpd:1;
+	u8	msArea1HasRiserVpd:1;
+	u8	msArea2HasRiserVpd:1;
+	u8	msArea3HasRiserVpd:1;
+	u8	reserved5:4;	
+	u8	reserved6;
+	u16	reserved7;
+
+	u8	reserved8[28];
+
+	u64	nonInterleavedBlocksStartAdr;
+	u64	nonInterleavedBlocksEndAdr;
+};
+
+/* Main Store VPD for Power4 */
+struct IoHriMainStoreChipInfo1 {
+	u32	chipMfgID	__attribute((packed));
+	char	chipECLevel[4]	__attribute((packed));
+};
+
+struct IoHriMainStoreVpdIdData {
+	char	typeNumber[4];
+	char	modelNumber[4];
+	char	partNumber[12];
+	char	serialNumber[12];
+};
+
+struct IoHriMainStoreVpdFruData {
+	char	fruLabel[8]	__attribute((packed));
+	u8	numberOfSlots	__attribute((packed));
+	u8	pluggingType	__attribute((packed));
+	u16	slotMapIndex	__attribute((packed));
+};
+
+struct IoHriMainStoreAdrRangeBlock {
+	void *	blockStart      __attribute((packed));
+	void *	blockEnd        __attribute((packed));
+	u32	blockProcChipId __attribute((packed));
+};
+
+#define MaxAreaAdrRangeBlocks 4
+
+struct IoHriMainStoreArea4 {
+	u32	msVpdFormat			__attribute((packed));
+	u8	containedVpdType		__attribute((packed));
+	u8	reserved1			__attribute((packed));
+	u16	reserved2			__attribute((packed));
+
+	u64	msExists			__attribute((packed));
+	u64	msFunctional			__attribute((packed));
+
+	u32	memorySize			__attribute((packed));
+	u32	procNodeId			__attribute((packed));
+
+	u32	numAdrRangeBlocks		__attribute((packed));
+	struct IoHriMainStoreAdrRangeBlock xAdrRangeBlock[MaxAreaAdrRangeBlocks] __attribute((packed));
+
+	struct IoHriMainStoreChipInfo1	chipInfo0	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo1	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo2	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo3	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo4	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo5	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo6	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo7	__attribute((packed));
+
+	void *   msRamAreaArray			__attribute((packed));
+	u32	msRamAreaArrayNumEntries	__attribute((packed));
+	u32	msRamAreaArrayEntrySize		__attribute((packed));
+
+	u32	numaDimmExists			__attribute((packed));
+	u32	numaDimmFunctional		__attribute((packed));
+	void *	numaDimmArray			__attribute((packed));
+	u32	numaDimmArrayNumEntries		__attribute((packed));
+	u32	numaDimmArrayEntrySize		__attribute((packed));
+
+	struct IoHriMainStoreVpdIdData  idData	__attribute((packed));
+
+	u64	powerData			__attribute((packed));
+	u64	cardAssemblyPartNum		__attribute((packed));
+	u64	chipSerialNum			__attribute((packed));
+
+	u64	reserved3			__attribute((packed));
+	char	reserved4[16]			__attribute((packed));
+
+	struct IoHriMainStoreVpdFruData fruData	__attribute((packed));
+
+	u8	vpdPortNum			__attribute((packed));
+	u8	reserved5			__attribute((packed));
+	u8	frameId				__attribute((packed));
+	u8	rackUnit			__attribute((packed));
+	char	asciiKeywordVpd[256]		__attribute((packed));
+	u32	reserved6			__attribute((packed));
+};
+
+
+struct IoHriMainStoreSegment5 {    
+	u16	reserved1;
+	u8	reserved2;
+	u8	msVpdFormat;
+
+	u32	totalMainStore;
+	u64	maxConfiguredMsAdr;
+
+	struct IoHriMainStoreArea4*	msAreaArray;
+	u32	msAreaArrayNumEntries;
+	u32	msAreaArrayEntrySize;
+
+	u32	msAreaExists;    
+	u32	msAreaFunctional;
+
+	u64	reserved3;
+};
+
+
+
+#endif // _IOHRIMAINSTORE_H
+
diff --git a/include/asm-ppc64/iSeries/IoHriProcessorVpd.h b/include/asm-ppc64/iSeries/IoHriProcessorVpd.h
new file mode 100644
index 000000000000..965433888653
--- /dev/null
+++ b/include/asm-ppc64/iSeries/IoHriProcessorVpd.h
@@ -0,0 +1,88 @@
+/*
+ * IoHriProcessorVpd.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _IOHRIPROCESSORVPD_H
+#define _IOHRIPROCESSORVPD_H
+
+//===================================================================
+//
+//	This struct maps Processor Vpd that is DMAd to SLIC by CSP 
+//
+
+#include <asm/types.h>
+
+struct IoHriProcessorVpd
+{
+
+	u8	xFormat;		// VPD format indicator		x00-x00
+	u8	xProcStatus:8;		// Processor State		x01-x01
+	u8	xSecondaryThreadCount;	// Secondary thread cnt		x02-x02
+	u8	xSrcType:1;		// Src Type			x03-x03
+	u8	xSrcSoft:1;		// Src stay soft		...
+	u8	xSrcParable:1;		// Src parable			...
+	u8	xRsvd1:5;		// Reserved			...
+	u16	xHvPhysicalProcIndex;	// Hypervisor physical proc index04-x05
+	u16	xRsvd2;			// Reserved			x06-x07
+	u32	xHwNodeId;		// Hardware node id		x08-x0B
+	u32	xHwProcId;		// Hardware processor id	x0C-x0F
+	
+	u32	xTypeNum;		// Card Type/CCIN number	x10-x13
+	u32	xModelNum;		// Model/Feature number		x14-x17
+	u64	xSerialNum;		// Serial number		x18-x1F
+	char xPartNum[12];		// Book Part or FPU number	x20-x2B
+	char xMfgID[4];			// Manufacturing ID		x2C-x2F
+
+	u32	xProcFreq;		// Processor Frequency		x30-x33
+	u32	xTimeBaseFreq;		// Time Base Frequency		x34-x37
+
+	u32	xChipEcLevel;		// Chip EC Levels		x38-x3B
+	u32	xProcIdReg;		// PIR SPR value		x3C-x3F
+	u32	xPVR;			// PVR value			x40-x43
+	u8	xRsvd3[12];		// Reserved			x44-x4F
+
+	u32	xInstCacheSize;		// Instruction cache size in KB	x50-x53
+	u32	xInstBlockSize;		// Instruction cache block size	x54-x57
+	u32	xDataCacheOperandSize;	// Data cache operand size	x58-x5B
+	u32	xInstCacheOperandSize;	// Inst cache operand size	x5C-x5F
+
+	u32	xDataL1CacheSizeKB;	// L1 data cache size in KB	x60-x63
+	u32	xDataL1CacheLineSize;	// L1 data cache block size	x64-x67
+	u64	xRsvd4;			// Reserved			x68-x6F
+
+	u32	xDataL2CacheSizeKB;	// L2 data cache size in KB	x70-x73
+	u32	xDataL2CacheLineSize;	// L2 data cache block size	x74-x77
+	u64	xRsvd5;			// Reserved			x78-x7F
+
+	u32	xDataL3CacheSizeKB;	// L3 data cache size in KB	x80-x83
+	u32	xDataL3CacheLineSize;	// L3 data cache block size	x84-x87
+	u64	xRsvd6;			// Reserved			x88-x8F
+   
+	u64	xFruLabel;		// Card Location Label		x90-x97
+	u8	xSlotsOnCard;		// Slots on card (0=no slots)	x98-x98
+	u8	xPartLocFlag;		// Location flag (0-pluggable 1-imbedded) x99-x99
+	u16	xSlotMapIndex;		// Index in slot map table	x9A-x9B
+	u8	xSmartCardPortNo;	// Smart card port number	x9C-x9C
+	u8	xRsvd7;			// Reserved			x9D-x9D
+	u16	xFrameIdAndRackUnit;	// Frame ID and rack unit adr	x9E-x9F
+    
+	u8	xRsvd8[24];		// Reserved			xA0-xB7
+
+	char xProcSrc[72];		// CSP format SRC		xB8-xFF
+};
+
+#endif /* _IOHRIPROCESSORVPD_H */
diff --git a/include/asm-ppc64/iSeries/ItExtVpdPanel.h b/include/asm-ppc64/iSeries/ItExtVpdPanel.h
new file mode 100644
index 000000000000..dee6b1273031
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItExtVpdPanel.h
@@ -0,0 +1,58 @@
+/*
+ * ItExtVpdPanel.h
+ * Copyright (C) 2002  Dave Boutcher IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITEXTVPDPANEL_H
+#define _ITEXTVPDPANEL_H
+
+/*
+ *
+ *	This struct maps the panel information 
+ *
+ * Warning:
+ *	This data must match the architecture for the panel information
+ *
+ */
+
+
+/*-------------------------------------------------------------------
+ * Standard Includes
+ *------------------------------------------------------------------- 
+*/
+#include <asm/types.h>
+
+struct ItExtVpdPanel
+{
+  // Definition of the Extended Vpd On Panel Data Area
+  char                      systemSerial[8];
+  char                      mfgID[4];
+  char                      reserved1[24];
+  char                      machineType[4];
+  char                      systemID[6];
+  char                      somUniqueCnt[4];
+  char                      serialNumberCount;
+  char                      reserved2[7];
+  u16                       bbu3;
+  u16                       bbu2;
+  u16                       bbu1;
+  char                      xLocationLabel[8];
+  u8                        xRsvd1[6];
+  u16                       xFrameId;
+  u8                        xRsvd2[48];
+};
+
+#endif /* _ITEXTVPDPANEL_H  */
diff --git a/include/asm-ppc64/iSeries/ItIplParmsReal.h b/include/asm-ppc64/iSeries/ItIplParmsReal.h
new file mode 100644
index 000000000000..4d8b430ab12d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItIplParmsReal.h
@@ -0,0 +1,76 @@
+/*
+ * ItIplParmsReal.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITIPLPARMSREAL_H
+#define _ITIPLPARMSREAL_H
+
+//==============================================================================
+//
+//	This struct maps the IPL Parameters DMA'd from the SP.                  
+//
+// Warning:
+//	This data must map in exactly 64 bytes and match the architecture for
+//	the IPL parms
+//
+//=============================================================================
+
+
+//-------------------------------------------------------------------
+// Standard Includes
+//-------------------------------------------------------------------
+#include <asm/types.h>
+
+struct ItIplParmsReal
+{
+	u8	xFormat;		// Defines format of IplParms		x00-x00
+	u8	xRsvd01:6;		// Reserved				x01-x01
+	u8	xAlternateSearch:1;	// Alternate search indicator		...
+	u8	xUaSupplied:1;		// UA Supplied on programmed IPL	...
+	u8	xLsUaFormat;		// Format byte for UA			x02-x02
+	u8	xRsvd02;		// Reserved				x03-x03
+	u32	xLsUa;			// LS UA				x04-x07
+	u32	xUnusedLsLid;		// First OS LID to load			x08-x0B
+	u16	xLsBusNumber;		// LS Bus Number			x0C-x0D
+	u8	xLsCardAdr;		// LS Card Address			x0E-x0E
+	u8	xLsBoardAdr;		// LS Board Address			x0F-x0F
+	u32	xRsvd03;		// Reserved				x10-x13
+	u8	xSpcnPresent:1;		// SPCN present				x14-x14
+	u8	xCpmPresent:1;		// CPM present				...
+	u8	xRsvd04:6;		// Reserved				...
+	u8	xRsvd05:4;		// Reserved				x15-x15
+	u8	xKeyLock:4;		// Keylock setting			...
+	u8	xRsvd06:6;		// Reserved				x16-x16
+	u8	xIplMode:2;		// Ipl mode (A|B|C|D)			...
+	u8	xHwIplType;		// Fast v slow v slow EC HW IPL		x17-x17
+	u16	xCpmEnabledIpl:1;	// CPM in effect when IPL initiated	x18-x19
+	u16	xPowerOnResetIpl:1;	// Indicate POR condition		...
+	u16	xMainStorePreserved:1;	// Main Storage is preserved		...
+	u16	xRsvd07:13;		// Reserved				...
+	u16	xIplSource:16;		// Ipl source				x1A-x1B
+	u8	xIplReason:8;		// Reason for this IPL			x1C-x1C
+	u8	xRsvd08;		// Reserved				x1D-x1D
+	u16	xRsvd09;		// Reserved				x1E-x1F
+	u16	xSysBoxType;		// System Box Type			x20-x21
+	u16	xSysProcType;		// System Processor Type		x22-x23
+	u32	xRsvd10;		// Reserved				x24-x27
+	u64	xRsvd11;		// Reserved				x28-x2F
+	u64	xRsvd12;		// Reserved				x30-x37
+	u64	xRsvd13;		// Reserved				x38-x3F
+};
+
+#endif /* _ITIPLPARMSREAL_H */
diff --git a/include/asm-ppc64/iSeries/ItLpNaca.h b/include/asm-ppc64/iSeries/ItLpNaca.h
new file mode 100644
index 000000000000..5baffddfae1b
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItLpNaca.h
@@ -0,0 +1,88 @@
+/*
+ * ItLpNaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITLPNACA_H
+#define _ITLPNACA_H
+
+//=============================================================================
+//
+//	This control block contains the data that is shared between the
+//	hypervisor (PLIC) and the OS.
+//
+//=============================================================================
+
+struct ItLpNaca
+{
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+//=============================================================================
+	u32	xDesc;			// Eye catcher			x00-x03
+	u16	xSize;			// Size of this class		x04-x05
+	u16	xIntHdlrOffset;		// Offset to IntHdlr array	x06-x07
+	u8	xMaxIntHdlrEntries;	// Number of entries in array	x08-x08
+	u8	xPrimaryLpIndex;	// LP Index of Primary		x09-x09
+	u8	xServiceLpIndex;	// LP Ind of Service Focal Pointx0A-x0A
+	u8	xLpIndex;		// LP Index			x0B-x0B
+	u16	xMaxLpQueues;		// Number of allocated queues	x0C-x0D
+	u16	xLpQueueOffset;		// Offset to start of LP queues	x0E-x0F
+	u8	xPirEnvironMode:8;	// Piranha or hardware		x10-x10
+	u8	xPirConsoleMode:8;	// Piranha console indicator	x11-x11
+	u8	xPirDasdMode:8;		// Piranha dasd indicator	x12-x12
+	u8	xRsvd1_0[5];		// Reserved for Piranha related	x13-x17
+	u8	xLparInstalled:1;	// Is LPAR installed on system	x18-x1F
+	u8	xSysPartitioned:1;	// Is the system partitioned	...
+	u8	xHwSyncedTBs:1;		// Hardware synced TBs		...
+	u8	xIntProcUtilHmt:1;	// Utilize HMT for interrupts	...
+	u8	xRsvd1_1:4;		// Reserved			...
+	u8	xSpVpdFormat:8;		// VPD areas are in CSP format	...
+	u8	xIntProcRatio:8;	// Ratio of int procs to procs	...
+	u8	xRsvd1_2[5];		// Reserved			...
+	u16	xRsvd1_3;		// Reserved			x20-x21
+	u16	xPlicVrmIndex;		// VRM index of PLIC		x22-x23
+	u16	xMinSupportedSlicVrmInd;// Min supported OS VRM index	x24-x25
+	u16	xMinCompatableSlicVrmInd;// Min compatible OS VRM index x26-x27
+	u64	xLoadAreaAddr;		// ER address of load area	x28-x2F
+	u32	xLoadAreaChunks;	// Chunks for the load area	x30-x33
+	u32	xPaseSysCallCRMask;	// Mask used to test CR before  x34-x37
+	// doing an ASR switch on PASE
+	// system call.
+	u64	xSlicSegmentTablePtr;   // Pointer to Slic seg table.   x38-x3f
+	u8	xRsvd1_4[64];		//         			x40-x7F 
+   
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+	u8	xRsvd2_0[128];		// Reserved			x00-x7F
+
+//=============================================================================
+// CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators
+// NB: Padding required to keep xInterrruptHdlr at x300 which is required 
+// for v4r4 PLIC.
+//=============================================================================
+	u8	xOldLpQueue[128];	// LP Queue needed for v4r4	100-17F
+	u8	xRsvd3_0[384];		// Reserved			180-2FF
+//=============================================================================
+// CACHE_LINE_7-8 0x0300 - 0x03FF Contains the address of the OS interrupt
+//  handlers
+//=============================================================================
+	u64	xInterruptHdlr[32];	// Interrupt handlers		300-x3FF
+};
+
+//=============================================================================
+
+#endif /* _ITLPNACA_H */
diff --git a/include/asm-ppc64/iSeries/ItLpQueue.h b/include/asm-ppc64/iSeries/ItLpQueue.h
new file mode 100644
index 000000000000..4f4dde2a638d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItLpQueue.h
@@ -0,0 +1,92 @@
+/*
+ * ItLpQueue.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITLPQUEUE_H
+#define _ITLPQUEUE_H
+
+//=============================================================================
+//
+//	This control block defines the simple LP queue structure that is 
+//	shared between the hypervisor (PLIC) and the OS in order to send 
+//	events to an LP.  
+//    
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+struct HvLpEvent;
+
+#define ITMaxLpQueues 8
+
+#define NotUsed		0	// Queue will not be used by PLIC
+#define DedicatedIo	1	// Queue dedicated to IO processor specified
+#define DedicatedLp	2	// Queue dedicated to LP specified
+#define Shared		3	// Queue shared for both IO and LP
+
+#define LpEventStackSize 4096
+#define LpEventMaxSize   256
+#define LpEventAlign	 64
+
+struct ItLpQueue
+{
+//
+//  The xSlicCurEventPtr is the pointer to the next event stack entry that will
+//  become valid.  The OS must peek at this entry to determine if it is valid.
+//  PLIC will set the valid indicator as the very last store into that entry.
+//
+//  When the OS has completed processing of the event then it will mark the event
+//  as invalid so that PLIC knows it can store into that event location again.
+//
+// If the event stack fills and there are overflow events, then PLIC will set 
+// the xPlicOverflowIntPending flag in which case the OS will have to fetch the 
+// additional LP events once they have drained the event stack.
+//
+// The first 16-bytes are known by both the OS and PLIC.  The remainder of the
+// cache line is for use by the OS.
+//
+//=============================================================================
+	u8	xPlicOverflowIntPending;// 0x00 Overflow events are pending
+	u8	xPlicStatus;		// 0x01 DedicatedIo or DedicatedLp or NotUsed
+	u16	xSlicLogicalProcIndex;	// 0x02 Logical Proc Index for correlation
+	u8	xPlicRsvd[12];		// 0x04
+	char*	xSlicCurEventPtr;	// 0x10
+	char*	xSlicLastValidEventPtr;	// 0x18
+	char*	xSlicEventStackPtr;	// 0x20
+	u8	xIndex;			// 0x28 unique sequential index.
+	u8	xSlicRsvd[3];		// 0x29-2b
+	u32	xInUseWord;		// 0x2C
+	u64	xLpIntCount;		// 0x30 Total Lp Int msgs processed
+	u64	xLpIntCountByType[9];	// 0x38-0x7F Event counts by type
+};
+
+extern struct ItLpQueue xItLpQueue;
+
+extern struct HvLpEvent * ItLpQueue_getNextLpEvent( struct ItLpQueue * );
+extern int ItLpQueue_isLpIntPending( struct ItLpQueue * ); 
+extern unsigned ItLpQueue_process( struct ItLpQueue *, struct pt_regs * );
+extern void ItLpQueue_clearValid( struct HvLpEvent * );
+
+static __inline__ void process_iSeries_events( void )
+{
+	__asm__ __volatile__ (
+	"	li	0,0x5555	\n\
+		sc"
+	: : : "r0", "r3" );	
+}
+
+#endif /* _ITLPQUEUE_H */
diff --git a/include/asm-ppc64/iSeries/ItLpRegSave.h b/include/asm-ppc64/iSeries/ItLpRegSave.h
new file mode 100644
index 000000000000..dafc4c813788
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItLpRegSave.h
@@ -0,0 +1,87 @@
+/*
+ * ItLpRegSave.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITLPREGSAVE_H
+#define _ITLPREGSAVE_H
+
+//=====================================================================================
+//
+//	This control block contains the data that is shared between PLIC
+//	and the OS
+//    
+//
+
+struct ItLpRegSave
+{
+	u32	xDesc;		// Eye catcher  "LpRS" ebcdic	000-003
+	u16	xSize;		// Size of this class		004-005
+	u8	xInUse;         // Area is live                 006-007
+	u8	xRsvd1[9]; 	// Reserved			007-00F
+
+	u8      xFixedRegSave[352]; // Fixed Register Save Area 010-16F 
+	u32	xCTRL;		// Control Register		170-173
+	u32	xDEC;		// Decrementer			174-177    
+	u32	xFPSCR;		// FP Status and Control Reg	178-17B
+	u32	xPVR;		// Processor Version Number	17C-17F
+    
+	u64	xMMCR0;		// Monitor Mode Control Reg 0	180-187
+	u32	xPMC1;		// Perf Monitor Counter 1	188-18B
+	u32	xPMC2;		// Perf Monitor Counter 2	18C-18F
+	u32	xPMC3;		// Perf Monitor Counter 3	190-193
+	u32	xPMC4;		// Perf Monitor Counter 4	194-197
+	u32	xPIR;		// Processor ID Reg		198-19B
+    
+	u32	xMMCR1;		// Monitor Mode Control Reg 1	19C-19F
+	u32	xMMCRA;		// Monitor Mode Control Reg A	1A0-1A3
+	u32	xPMC5;		// Perf Monitor Counter 5	1A4-1A7
+	u32	xPMC6;		// Perf Monitor Counter 6	1A8-1AB
+	u32	xPMC7;		// Perf Monitor Counter 7	1AC-1AF
+	u32	xPMC8;		// Perf Monitor Counter 8	1B0-1B3
+	u32	xTSC;		// Thread Switch Control	1B4-1B7
+	u32	xTST;		// Thread Switch Timeout	1B8-1BB
+	u32	xRsvd;          // Reserved                     1BC-1BF
+
+	u64	xACCR;		// Address Compare Control Reg	1C0-1C7
+	u64	xIMR;		// Instruction Match Register	1C8-1CF    
+	u64	xSDR1;		// Storage Description Reg 1	1D0-1D7    
+	u64	xSPRG0;		// Special Purpose Reg General0	1D8-1DF
+	u64	xSPRG1;		// Special Purpose Reg General1	1E0-1E7
+	u64	xSPRG2;		// Special Purpose Reg General2	1E8-1EF
+	u64	xSPRG3;		// Special Purpose Reg General3	1F0-1F7
+	u64	xTB;		// Time Base Register		1F8-1FF
+   
+	u64	xFPR[32];	// Floating Point Registers	200-2FF
+
+	u64	xMSR;		// Machine State Register  	300-307
+	u64	xNIA;		// Next Instruction Address	308-30F
+
+	u64	xDABR;		// Data Address Breakpoint Reg	310-317
+	u64	xIABR;		// Inst Address Breakpoint Reg	318-31F
+
+	u64	xHID0;		// HW Implementation Dependent0	320-327
+
+	u64	xHID4;		// HW Implementation Dependent4	328-32F
+	u64	xSCOMd;		// SCON Data Reg (SPRG4)       	330-337
+	u64	xSCOMc;		// SCON Command Reg (SPRG5)    	338-33F
+	u64	xSDAR;		// Sample Data Address Register	340-347
+	u64	xSIAR;		// Sample Inst Address Register	348-34F
+
+	u8	xRsvd3[176];	// Reserved			350-3FF
+};
+
+#endif /* _ITLPREGSAVE_H */
diff --git a/include/asm-ppc64/iSeries/ItSpCommArea.h b/include/asm-ppc64/iSeries/ItSpCommArea.h
new file mode 100644
index 000000000000..f1b56f9e11e2
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItSpCommArea.h
@@ -0,0 +1,39 @@
+/*
+ * ItSpCommArea.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+#ifndef _ITSPCOMMAREA_H
+#define _ITSPCOMMAREA_H
+
+
+struct SpCommArea
+{
+	u32	xDesc;			// Descriptor (only in new formats)	000-003
+	u8	xFormat;		// Format (only in new formats)		004-004
+	u8	xRsvd1[11];		// Reserved				005-00F
+	u64	xRawTbAtIplStart;	// Raw HW TB value when IPL is started	010-017
+	u64	xRawTodAtIplStart;	// Raw HW TOD value when IPL is started	018-01F
+	u64	xBcdTimeAtIplStart;	// BCD time when IPL is started		020-027
+	u64	xBcdTimeAtOsStart;	// BCD time when OS passed control	028-02F
+	u8	xRsvd2[80];		// Reserved				030-07F
+};
+
+extern struct SpCommArea xSpCommArea;
+
+#endif /* _ITSPCOMMAREA_H */
diff --git a/include/asm-ppc64/iSeries/ItVpdAreas.h b/include/asm-ppc64/iSeries/ItVpdAreas.h
new file mode 100644
index 000000000000..d120439f30a5
--- /dev/null
+++ b/include/asm-ppc64/iSeries/ItVpdAreas.h
@@ -0,0 +1,96 @@
+/*
+ * ItVpdAreas.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ITVPDAREAS_H
+#define _ITVPDAREAS_H
+
+//=====================================================================================
+//
+//      This file defines the address and length of all of the VPD area passed to
+//	the OS from PLIC (most of which start from the SP).
+//
+
+#include <asm/types.h>
+
+// VPD Entry index is carved in stone - cannot be changed (easily).
+#define ItVpdCecVpd				   0
+#define ItVpdDynamicSpace			   1
+#define ItVpdExtVpd				   2
+#define ItVpdExtVpdOnPanel			   3
+#define ItVpdFirstPaca				   4
+#define ItVpdIoVpd				   5
+#define ItVpdIplParms				   6
+#define ItVpdMsVpd				   7
+#define ItVpdPanelVpd				   8
+#define ItVpdLpNaca				   9
+#define ItVpdBackplaneAndMaybeClockCardVpd        10 
+#define ItVpdRecoveryLogBuffer		          11
+#define ItVpdSpCommArea				  12
+#define ItVpdSpLogBuffer			  13
+#define ItVpdSpLogBufferSave			  14
+#define ItVpdSpCardVpd				  15
+#define ItVpdFirstProcVpd			  16	
+#define ItVpdApModelVpd				  17
+#define ItVpdClockCardVpd			  18
+#define ItVpdBusExtCardVpd			  19
+#define ItVpdProcCapacityVpd			  20
+#define ItVpdInteractiveCapacityVpd		  21
+#define ItVpdFirstSlotLabel			  22
+#define ItVpdFirstLpQueue			  23
+#define ItVpdFirstL3CacheVpd			  24	
+#define ItVpdFirstProcFruVpd			  25
+
+#define ItVpdMaxEntries				  26
+
+
+#define ItDmaMaxEntries				  10
+
+#define ItVpdAreasMaxSlotLabels		 192 
+
+
+struct SlicVpdAdrs {
+	u32	pad1;
+	void *  vpdAddr;
+};
+
+
+struct	ItVpdAreas
+{
+	u32	xSlicDesc;		// Descriptor				000-003
+	u16	xSlicSize;		// Size of this control block		004-005
+	u16	xPlicAdjustVpdLens:1;	// Flag to indicate new interface 	006-007
+	u16	xRsvd1:15;		// Reserved bits			...
+	u16	xSlicVpdEntries;	// Number of VPD entries		008-009
+	u16	xSlicDmaEntries;	// Number of DMA entries		00A-00B
+	u16	xSlicMaxLogicalProcs;	// Maximum logical processors		00C-00D
+	u16	xSlicMaxPhysicalProcs;	// Maximum physical processors		00E-00F
+	u16	xSlicDmaToksOffset;	// Offset into this of array		010-011
+	u16	xSlicVpdAdrsOffset;	// Offset into this of array		012-013
+	u16	xSlicDmaLensOffset;	// Offset into this of array		014-015
+	u16	xSlicVpdLensOffset;	// Offset into this of array		016-017
+	u16	xSlicMaxSlotLabels;	// Maximum number of slot labels	018-019
+	u16	xSlicMaxLpQueues;	// Maximum number of LP Queues		01A-01B
+	u8	xRsvd2[4];		// Reserved				01C-01F
+	u64	xRsvd3[12];		// Reserved				020-07F
+	u32	xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths		080-0A7
+	u32	xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens		0A8-0CF
+	u32	xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths		0D0-12F
+	void * xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers	130-1EF
+};
+
+#endif /* _ITVPDAREAS_H */
diff --git a/include/asm-ppc64/iSeries/LparData.h b/include/asm-ppc64/iSeries/LparData.h
new file mode 100644
index 000000000000..e54f3b686e58
--- /dev/null
+++ b/include/asm-ppc64/iSeries/LparData.h
@@ -0,0 +1,49 @@
+/*
+ * LparData.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _LPARDATA_H
+#define _LPARDATA_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/abs_addr.h>
+
+#include <asm/iSeries/ItLpNaca.h>
+#include <asm/iSeries/ItLpRegSave.h>
+#include <asm/iSeries/HvReleaseData.h>
+#include <asm/iSeries/LparMap.h>
+#include <asm/iSeries/ItVpdAreas.h>
+#include <asm/iSeries/ItIplParmsReal.h>
+#include <asm/iSeries/ItExtVpdPanel.h>
+#include <asm/iSeries/ItLpQueue.h>
+#include <asm/iSeries/IoHriProcessorVpd.h>
+
+extern struct LparMap	xLparMap;
+extern struct HvReleaseData hvReleaseData;
+extern struct ItLpNaca	itLpNaca;
+extern struct ItIplParmsReal xItIplParmsReal;
+extern struct ItExtVpdPanel xItExtVpdPanel;
+extern struct IoHriProcessorVpd xIoHriProcessorVpd[];
+extern struct ItLpQueue xItLpQueue;
+extern struct ItVpdAreas itVpdAreas;
+extern u64    xMsVpd[];
+extern struct msChunks msChunks;
+
+
+#endif /* _LPARDATA_H */
diff --git a/include/asm-ppc64/iSeries/LparMap.h b/include/asm-ppc64/iSeries/LparMap.h
new file mode 100644
index 000000000000..075205bb0f4a
--- /dev/null
+++ b/include/asm-ppc64/iSeries/LparMap.h
@@ -0,0 +1,67 @@
+/*
+ * LparMap.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _LPARMAP_H
+#define _LPARMAP_H
+
+#include <asm/types.h>
+
+/* The iSeries hypervisor will set up mapping for one or more 
+ * ESID/VSID pairs (in SLB/segment registers) and will set up
+ * mappings of one or more ranges of pages to VAs.
+ * We will have the hypervisor set up the ESID->VSID mapping
+ * for the four kernel segments (C-F).  With shared processors,
+ * the hypervisor will clear all segment registers and reload
+ * these four whenever the processor is switched from one 
+ * partition to another.
+ */
+
+/* The Vsid and Esid identified below will be used by the hypervisor
+ * to set up a memory mapping for part of the load area before giving
+ * control to the Linux kernel.  The load area is 64 MB, but this must
+ * not attempt to map the whole load area.  The Hashed Page Table may
+ * need to be located within the load area (if the total partition size
+ * is 64 MB), but cannot be mapped.  Typically, this should specify
+ * to map half (32 MB) of the load area.
+ * 
+ * The hypervisor will set up page table entries for the number of 
+ * pages specified.
+ *
+ * In 32-bit mode, the hypervisor will load all four of the
+ * segment registers (identified by the low-order four bits of the 
+ * Esid field.  In 64-bit mode, the hypervisor will load one SLB
+ * entry to map the Esid to the Vsid.
+*/
+
+// Hypervisor initially maps 32MB of the load area 
+#define HvPagesToMap 8192
+
+struct LparMap
+{
+	u64	  xNumberEsids;		// Number of ESID/VSID pairs (1)
+	u64	  xNumberRanges;	// Number of VA ranges to map (1)
+	u64	  xSegmentTableOffs;	// Page number within load area of seg table (0)
+	u64	  xRsvd[5];		// Reserved (0)
+	u64	  xKernelEsid;  	// Esid used to map kernel load (0x0C00000000)	
+	u64	  xKernelVsid;		// Vsid used to map kernel load (0x0C00000000)
+	u64	  xPages;		// Number of pages to be mapped	(8192)
+	u64	  xOffset;		// Offset from start of load area (0)
+	u64	  xVPN;			// Virtual Page Number (0x000C000000000000)
+};
+
+#endif /* _LPARMAP_H */
diff --git a/include/asm-ppc64/iSeries/XmPciLpEvent.h b/include/asm-ppc64/iSeries/XmPciLpEvent.h
new file mode 100644
index 000000000000..a3d27f116e49
--- /dev/null
+++ b/include/asm-ppc64/iSeries/XmPciLpEvent.h
@@ -0,0 +1,18 @@
+
+#ifndef	__XMPCILPEVENT_H__
+#define	__XMPCILPEVENT_H__
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int XmPciLpEvent_init(void);
+void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __XMPCILPEVENT_H__ */
diff --git a/include/asm-ppc64/iSeries/iSeries_io.h b/include/asm-ppc64/iSeries/iSeries_io.h
new file mode 100644
index 000000000000..f52b7599b372
--- /dev/null
+++ b/include/asm-ppc64/iSeries/iSeries_io.h
@@ -0,0 +1,46 @@
+#ifndef _ISERIES_IO_H
+#define _ISERIES_IO_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PPC_ISERIES
+#include <linux/types.h>
+/************************************************************************/
+/* File iSeries_io.h created by Allan Trautman on Thu Dec 28 2000.      */
+/************************************************************************/
+/* Remaps the io.h for the iSeries Io                                   */
+/* Copyright (C) 20yy  Allan H Trautman, IBM Corporation                */
+/*                                                                      */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation; either version 2 of the License, or    */
+/* (at your option) any later version.                                  */
+/*                                                                      */
+/* This program is distributed in the hope that it will be useful,      */ 
+/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
+/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
+/* GNU General Public License for more details.                         */
+/*                                                                      */
+/* You should have received a copy of the GNU General Public License    */ 
+/* along with this program; if not, write to the:                       */
+/* Free Software Foundation, Inc.,                                      */ 
+/* 59 Temple Place, Suite 330,                                          */ 
+/* Boston, MA  02111-1307  USA                                          */
+/************************************************************************/
+/* Change Activity:                                                     */
+/*   Created December 28, 2000                                          */
+/* End Change Activity                                                  */
+/************************************************************************/
+extern u8   iSeries_Read_Byte(const volatile void __iomem * IoAddress);
+extern u16  iSeries_Read_Word(const volatile void __iomem * IoAddress);
+extern u32  iSeries_Read_Long(const volatile void __iomem * IoAddress);
+extern void iSeries_Write_Byte(u8  IoData, volatile void __iomem * IoAddress);
+extern void iSeries_Write_Word(u16 IoData, volatile void __iomem * IoAddress);
+extern void iSeries_Write_Long(u32 IoData, volatile void __iomem * IoAddress);
+
+extern void iSeries_memset_io(volatile void __iomem *dest, char x, size_t n);
+extern void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t n);
+extern void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *source, size_t n);
+
+#endif /* CONFIG_PPC_ISERIES */
+#endif /* _ISERIES_IO_H */
diff --git a/include/asm-ppc64/iSeries/iSeries_irq.h b/include/asm-ppc64/iSeries/iSeries_irq.h
new file mode 100644
index 000000000000..ff8ddede038c
--- /dev/null
+++ b/include/asm-ppc64/iSeries/iSeries_irq.h
@@ -0,0 +1,19 @@
+#ifndef	__ISERIES_IRQ_H__
+#define	__ISERIES_IRQ_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void iSeries_init_IRQ(void);
+int  iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, HvAgentId);
+int  iSeries_assign_IRQ(int, HvBusNumber, HvSubBusNumber, HvAgentId);
+void iSeries_activate_IRQs(void);
+
+int XmPciLpEvent_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ISERIES_IRQ_H__ */
diff --git a/include/asm-ppc64/iSeries/iSeries_pci.h b/include/asm-ppc64/iSeries/iSeries_pci.h
new file mode 100644
index 000000000000..5769cff4c00c
--- /dev/null
+++ b/include/asm-ppc64/iSeries/iSeries_pci.h
@@ -0,0 +1,112 @@
+#ifndef _ISERIES_64_PCI_H
+#define _ISERIES_64_PCI_H
+
+/************************************************************************/
+/* File iSeries_pci.h created by Allan Trautman on Tue Feb 20, 2001.    */
+/************************************************************************/
+/* Define some useful macros for the iSeries pci routines.              */
+/* Copyright (C) 2001  Allan H Trautman, IBM Corporation                */
+/*                                                                      */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation; either version 2 of the License, or    */
+/* (at your option) any later version.                                  */
+/*                                                                      */
+/* This program is distributed in the hope that it will be useful,      */ 
+/* but WITHOUT ANY WARRANTY; without even the implied warranty of       */
+/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        */
+/* GNU General Public License for more details.                         */
+/*                                                                      */
+/* You should have received a copy of the GNU General Public License    */ 
+/* along with this program; if not, write to the:                       */
+/* Free Software Foundation, Inc.,                                      */ 
+/* 59 Temple Place, Suite 330,                                          */ 
+/* Boston, MA  02111-1307  USA                                          */
+/************************************************************************/
+/* Change Activity:                                                     */
+/*   Created Feb 20, 2001                                               */
+/*   Added device reset, March 22, 2001                                 */
+/*   Ported to ppc64, May 25, 2001                                      */
+/* End Change Activity                                                  */
+/************************************************************************/
+
+#include <asm/iSeries/HvCallPci.h>
+#include <asm/abs_addr.h>
+
+struct pci_dev;				/* For Forward Reference        */
+struct iSeries_Device_Node;
+
+/************************************************************************/
+/* Gets iSeries Bus, SubBus, DevFn using iSeries_Device_Node structure */
+/************************************************************************/
+
+#define ISERIES_BUS(DevPtr)	DevPtr->DsaAddr.Dsa.busNumber
+#define ISERIES_SUBBUS(DevPtr)	DevPtr->DsaAddr.Dsa.subBusNumber
+#define ISERIES_DEVICE(DevPtr)	DevPtr->DsaAddr.Dsa.deviceId
+#define ISERIES_DSA(DevPtr)	DevPtr->DsaAddr.DsaAddr
+#define ISERIES_DEVFUN(DevPtr)	DevPtr->DevFn
+#define ISERIES_DEVNODE(PciDev) ((struct iSeries_Device_Node*)PciDev->sysdata)
+
+#define EADsMaxAgents 7
+
+/************************************************************************/
+/* Decodes Linux DevFn to iSeries DevFn, bridge device, or function.    */
+/* For Linux, see PCI_SLOT and PCI_FUNC in include/linux/pci.h          */
+/************************************************************************/
+
+#define ISERIES_PCI_AGENTID(idsel,func)	((idsel & 0x0F) << 4) | (func  & 0x07)
+#define ISERIES_ENCODE_DEVICE(agentid)	((0x10) | ((agentid&0x20)>>2) | (agentid&07))
+
+#define ISERIES_GET_DEVICE_FROM_SUBBUS(subbus)   ((subbus >> 5) & 0x7)
+#define ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus) ((subbus >> 2) & 0x7)
+
+/*
+ * N.B. the ISERIES_DECODE_* macros are not used anywhere, and I think
+ * the 0x71 (at least) must be wrong - 0x78 maybe?  -- paulus.
+ */
+#define ISERIES_DECODE_DEVFN(linuxdevfn)  (((linuxdevfn & 0x71) << 1) | (linuxdevfn & 0x07))
+#define ISERIES_DECODE_DEVICE(linuxdevfn) (((linuxdevfn & 0x38) >> 3) |(((linuxdevfn & 0x40) >> 2) + 0x10))
+#define ISERIES_DECODE_FUNCTION(linuxdevfn) (linuxdevfn & 0x07)
+
+/************************************************************************/
+/* Converts Virtual Address to Real Address for Hypervisor calls        */
+/************************************************************************/
+
+#define ISERIES_HV_ADDR(virtaddr)  (0x8000000000000000 | virt_to_abs(virtaddr))
+
+/************************************************************************/
+/* iSeries Device Information                                           */
+/************************************************************************/
+
+struct iSeries_Device_Node {
+	struct list_head Device_List;
+	struct pci_dev* PciDev;         /* Pointer to pci_dev structure*/
+        union HvDsaMap	DsaAddr;	/* Direct Select Address       */
+                                        /* busNumber,subBusNumber,     */ 
+	                                /* deviceId, barNumber         */
+	HvAgentId       AgentId;	/* Hypervisor DevFn            */
+	int             DevFn;          /* Linux devfn                 */
+	int             BarOffset;
+	int             Irq;            /* Assigned IRQ                */
+	int             ReturnCode;	/* Return Code Holder          */
+	int             IoRetry;        /* Current Retry Count         */
+	int             Flags;          /* Possible flags(disable/bist)*/
+	u16             Vendor;         /* Vendor ID                   */
+	u8              LogicalSlot;    /* Hv Slot Index for Tces      */
+	struct iommu_table* iommu_table;/* Device TCE Table            */ 
+	u8              PhbId;          /* Phb Card is on.             */
+	u16             Board;          /* Board Number                */
+	u8              FrameId;	/* iSeries spcn Frame Id       */
+	char            CardLocation[4];/* Char format of planar vpd   */
+	char            Location[20];   /* Frame  1, Card C10          */
+};
+
+/************************************************************************/
+/* Functions                                                            */
+/************************************************************************/
+
+extern int           iSeries_Device_Information(struct pci_dev*,char*, int);
+extern void          iSeries_Get_Location_Code(struct iSeries_Device_Node*);
+extern int           iSeries_Device_ToggleReset(struct pci_dev* PciDev, int AssertTime, int DelayTime);
+
+#endif /* _ISERIES_64_PCI_H */
diff --git a/include/asm-ppc64/iSeries/iSeries_proc.h b/include/asm-ppc64/iSeries/iSeries_proc.h
new file mode 100644
index 000000000000..adb6dc14dd4d
--- /dev/null
+++ b/include/asm-ppc64/iSeries/iSeries_proc.h
@@ -0,0 +1,24 @@
+/*
+ * iSeries_proc.h
+ * Copyright (C) 2001  Kyle A. Lucke IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_PROC_H
+#define _ISERIES_PROC_H
+
+extern void iSeries_proc_early_init(void);
+
+#endif /* _iSeries_PROC_H */
diff --git a/include/asm-ppc64/iSeries/mf.h b/include/asm-ppc64/iSeries/mf.h
new file mode 100644
index 000000000000..2e59a8e15a0b
--- /dev/null
+++ b/include/asm-ppc64/iSeries/mf.h
@@ -0,0 +1,57 @@
+/*
+ * mf.h
+ * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
+ * Copyright (C) 2004  Stephen Rothwell IBM Corporation
+ *
+ * This modules exists as an interface between a Linux secondary partition
+ * running on an iSeries and the primary partition's Virtual Service
+ * Processor (VSP) object.  The VSP has final authority over powering on/off
+ * all partitions in the iSeries.  It also provides miscellaneous low-level
+ * machine facility type operations.
+ *
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_PPC64_ISERIES_MF_H
+#define _ASM_PPC64_ISERIES_MF_H
+
+#include <linux/types.h>
+
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvCallEvent.h>
+
+struct rtc_time;
+
+typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
+
+extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned size, unsigned amount, MFCompleteHandler hdlr,
+		void *userToken);
+extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned count, MFCompleteHandler hdlr, void *userToken);
+
+extern void mf_power_off(void);
+extern void mf_reboot(void);
+
+extern void mf_display_src(u32 word);
+extern void mf_display_progress(u16 value);
+extern void mf_clear_src(void);
+
+extern void mf_init(void);
+
+extern int mf_get_rtc(struct rtc_time *tm);
+extern int mf_set_rtc(struct rtc_time *tm);
+
+#endif /* _ASM_PPC64_ISERIES_MF_H */
diff --git a/include/asm-ppc64/iSeries/vio.h b/include/asm-ppc64/iSeries/vio.h
new file mode 100644
index 000000000000..3e5766a849d6
--- /dev/null
+++ b/include/asm-ppc64/iSeries/vio.h
@@ -0,0 +1,129 @@
+/* -*- linux-c -*-
+ *  drivers/char/vio.h
+ *
+ *  iSeries Virtual I/O Message Path header
+ *
+ *  Authors: Dave Boutcher <boutcher@us.ibm.com>
+ *           Ryan Arnold <ryanarn@us.ibm.com>
+ *           Colin Devilbiss <devilbis@us.ibm.com>
+ *
+ * (C) Copyright 2000 IBM Corporation
+ * 
+ * This header file is used by the iSeries virtual I/O device
+ * drivers.  It defines the interfaces to the common functions
+ * (implemented in drivers/char/viopath.h) as well as defining
+ * common functions and structures.  Currently (at the time I 
+ * wrote this comment) the iSeries virtual I/O device drivers
+ * that use this are 
+ *   drivers/block/viodasd.c 
+ *   drivers/char/viocons.c
+ *   drivers/char/viotape.c
+ *   drivers/cdrom/viocd.c
+ *
+ * The iSeries virtual ethernet support (veth.c) uses a whole
+ * different set of functions.
+ * 
+ * This program is free software;  you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) anyu later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.  
+ *
+ * You should have received a copy of the GNU General Public License 
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef _ISERIES_VIO_H
+#define _ISERIES_VIO_H
+
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvLpEvent.h>
+
+/* iSeries virtual I/O events use the subtype field in
+ * HvLpEvent to figure out what kind of vio event is coming
+ * in.  We use a table to route these, and this defines
+ * the maximum number of distinct subtypes
+ */
+#define VIO_MAX_SUBTYPES 8
+
+/* Each subtype can register a handler to process their events.
+ * The handler must have this interface.
+ */
+typedef void (vio_event_handler_t) (struct HvLpEvent * event);
+
+int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
+int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
+int vio_setHandler(int subtype, vio_event_handler_t * beh);
+int vio_clearHandler(int subtype);
+int viopath_isactive(HvLpIndex lp);
+HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
+HvLpInstanceId viopath_targetinst(HvLpIndex lp);
+void vio_set_hostlp(void);
+void *vio_get_event_buffer(int subtype);
+void vio_free_event_buffer(int subtype, void *buffer);
+
+extern HvLpIndex viopath_hostLp;
+extern HvLpIndex viopath_ourLp;
+
+#define VIOCHAR_MAX_DATA 200
+
+#define VIOMAJOR_SUBTYPE_MASK 0xff00
+#define VIOMINOR_SUBTYPE_MASK 0x00ff
+#define VIOMAJOR_SUBTYPE_SHIFT 8
+
+#define VIOVERSION            0x0101
+
+/*
+ * This is the general structure for VIO errors; each module should have
+ * a table of them, and each table should be terminated by an entry of
+ * { 0, 0, NULL }.  Then, to find a specific error message, a module
+ * should pass its local table and the return code.
+ */
+struct vio_error_entry {
+	u16 rc;
+	int errno;
+	const char *msg;
+};
+const struct vio_error_entry *vio_lookup_rc(const struct vio_error_entry
+					    *local_table, u16 rc);
+
+enum viosubtypes {
+	viomajorsubtype_monitor = 0x0100,
+	viomajorsubtype_blockio = 0x0200,
+	viomajorsubtype_chario = 0x0300,
+	viomajorsubtype_config = 0x0400,
+	viomajorsubtype_cdio = 0x0500,
+	viomajorsubtype_tape = 0x0600,
+	viomajorsubtype_scsi = 0x0700
+};
+
+
+enum vioconfigsubtype {
+	vioconfigget = 0x0001,
+};
+
+enum viorc {
+	viorc_good = 0x0000,
+	viorc_noConnection = 0x0001,
+	viorc_noReceiver = 0x0002,
+	viorc_noBufferAvailable = 0x0003,
+	viorc_invalidMessageType = 0x0004,
+	viorc_invalidRange = 0x0201,
+	viorc_invalidToken = 0x0202,
+	viorc_DMAError = 0x0203,
+	viorc_useError = 0x0204,
+	viorc_releaseError = 0x0205,
+	viorc_invalidDisk = 0x0206,
+	viorc_openRejected = 0x0301
+};
+
+struct device;
+
+extern struct device *iSeries_vio_dev;
+
+#endif /* _ISERIES_VIO_H */
diff --git a/include/asm-ppc64/ide.h b/include/asm-ppc64/ide.h
new file mode 100644
index 000000000000..0aae1c590c0e
--- /dev/null
+++ b/include/asm-ppc64/ide.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/include/asm-ppc/ide.h
+ *
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ *  This file contains the ppc64 architecture specific IDE code.
+ */
+
+#ifndef __ASMPPC64_IDE_H
+#define __ASMPPC64_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+# define MAX_HWIFS	10
+#endif
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMPPC64_IDE_H */
diff --git a/include/asm-ppc64/io.h b/include/asm-ppc64/io.h
new file mode 100644
index 000000000000..aba1dfa388ba
--- /dev/null
+++ b/include/asm-ppc64/io.h
@@ -0,0 +1,458 @@
+#ifndef _PPC64_IO_H
+#define _PPC64_IO_H
+
+/* 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#ifdef CONFIG_PPC_ISERIES 
+#include <asm/iSeries/iSeries_io.h>
+#endif  
+#include <asm/memory.h>
+#include <asm/delay.h>
+
+#include <asm-generic/iomap.h>
+
+#define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 *)(p), (a), (c))
+
+
+#define SIO_CONFIG_RA	0x398
+#define SIO_CONFIG_RD	0x399
+
+#define SLOW_DOWN_IO
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long io_page_mask;
+
+#define MAX_ISA_PORT 0x10000
+
+#define _IO_IS_VALID(port) ((port) >= MAX_ISA_PORT || (1 << (port>>PAGE_SHIFT)) \
+			    & io_page_mask)
+
+#ifdef CONFIG_PPC_ISERIES
+/* __raw_* accessors aren't supported on iSeries */
+#define __raw_readb(addr)	{ BUG(); 0; }
+#define __raw_readw(addr)       { BUG(); 0; }
+#define __raw_readl(addr)       { BUG(); 0; }
+#define __raw_readq(addr)       { BUG(); 0; }
+#define __raw_writeb(v, addr)   { BUG(); 0; }
+#define __raw_writew(v, addr)   { BUG(); 0; }
+#define __raw_writel(v, addr)   { BUG(); 0; }
+#define __raw_writeq(v, addr)   { BUG(); 0; }
+#define readb(addr)		iSeries_Read_Byte(addr)
+#define readw(addr)		iSeries_Read_Word(addr)
+#define readl(addr)		iSeries_Read_Long(addr)
+#define writeb(data, addr)	iSeries_Write_Byte((data),(addr))
+#define writew(data, addr)	iSeries_Write_Word((data),(addr))
+#define writel(data, addr)	iSeries_Write_Long((data),(addr))
+#define memset_io(a,b,c)	iSeries_memset_io((a),(b),(c))
+#define memcpy_fromio(a,b,c)	iSeries_memcpy_fromio((a), (b), (c))
+#define memcpy_toio(a,b,c)	iSeries_memcpy_toio((a), (b), (c))
+
+#define inb(addr)		readb(((void __iomem *)(long)(addr)))
+#define inw(addr)		readw(((void __iomem *)(long)(addr)))
+#define inl(addr)		readl(((void __iomem *)(long)(addr)))
+#define outb(data,addr)		writeb(data,((void __iomem *)(long)(addr)))
+#define outw(data,addr)		writew(data,((void __iomem *)(long)(addr)))
+#define outl(data,addr)		writel(data,((void __iomem *)(long)(addr)))
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define insw_ns(port, buf, ns)	_insw_ns((u16 *)((port)+pci_io_base), (buf), (ns))
+#define insl_ns(port, buf, nl)	_insl_ns((u32 *)((port)+pci_io_base), (buf), (nl))
+#else
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *)addr;
+}
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *)addr;
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *)addr = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *)addr = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *)addr = v;
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *)addr = v;
+}
+#define readb(addr)		eeh_readb(addr)
+#define readw(addr)		eeh_readw(addr)
+#define readl(addr)		eeh_readl(addr)
+#define readq(addr)		eeh_readq(addr)
+#define writeb(data, addr)	eeh_writeb((data), (addr))
+#define writew(data, addr)	eeh_writew((data), (addr))
+#define writel(data, addr)	eeh_writel((data), (addr))
+#define writeq(data, addr)	eeh_writeq((data), (addr))
+#define memset_io(a,b,c)	eeh_memset_io((a),(b),(c))
+#define memcpy_fromio(a,b,c)	eeh_memcpy_fromio((a),(b),(c))
+#define memcpy_toio(a,b,c)	eeh_memcpy_toio((a),(b),(c))
+#define inb(port)		eeh_inb((unsigned long)port)
+#define outb(val, port)		eeh_outb(val, (unsigned long)port)
+#define inw(port)		eeh_inw((unsigned long)port)
+#define outw(val, port)		eeh_outw(val, (unsigned long)port)
+#define inl(port)		eeh_inl((unsigned long)port)
+#define outl(val, port)		eeh_outl(val, (unsigned long)port)
+
+/*
+ * The insw/outsw/insl/outsl macros don't do byte-swapping.
+ * They are only used in practice for transferring buffers which
+ * are arrays of bytes, and byte-swapping is not appropriate in
+ * that case.  - paulus */
+#define insb(port, buf, ns)	eeh_insb((port), (buf), (ns))
+#define insw(port, buf, ns)	eeh_insw_ns((port), (buf), (ns))
+#define insl(port, buf, nl)	eeh_insl_ns((port), (buf), (nl))
+#define insw_ns(port, buf, ns)	eeh_insw_ns((port), (buf), (ns))
+#define insl_ns(port, buf, nl)	eeh_insl_ns((port), (buf), (nl))
+
+#define outsb(port, buf, ns)  _outsb((u8 *)((port)+pci_io_base), (buf), (ns))
+#define outsw(port, buf, ns)  _outsw_ns((u16 *)((port)+pci_io_base), (buf), (ns))
+#define outsl(port, buf, nl)  _outsl_ns((u32 *)((port)+pci_io_base), (buf), (nl))
+
+#endif
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+extern void _insb(volatile u8 *port, void *buf, int ns);
+extern void _outsb(volatile u8 *port, const void *buf, int ns);
+extern void _insw(volatile u16 *port, void *buf, int ns);
+extern void _outsw(volatile u16 *port, const void *buf, int ns);
+extern void _insl(volatile u32 *port, void *buf, int nl);
+extern void _outsl(volatile u32 *port, const void *buf, int nl);
+extern void _insw_ns(volatile u16 *port, void *buf, int ns);
+extern void _outsw_ns(volatile u16 *port, const void *buf, int ns);
+extern void _insl_ns(volatile u32 *port, void *buf, int nl);
+extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
+
+#define mmiowb()
+
+/*
+ * output pause versions need a delay at least for the
+ * w83c105 ide controller in a p610.
+ */
+#define inb_p(port)             inb(port)
+#define outb_p(val, port)       (udelay(1), outb((val), (port)))
+#define inw_p(port)             inw(port)
+#define outw_p(val, port)       (udelay(1), outw((val), (port)))
+#define inl_p(port)             inl(port)
+#define outl_p(val, port)       (udelay(1), outl((val), (port)))
+
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define outsw_ns(port, buf, ns)	_outsw_ns((u16 *)((port)+pci_io_base), (buf), (ns))
+#define outsl_ns(port, buf, nl)	_outsl_ns((u32 *)((port)+pci_io_base), (buf), (nl))
+
+
+#define IO_SPACE_LIMIT ~(0UL)
+
+
+#ifdef __KERNEL__
+extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr,
+		     	      unsigned long size, unsigned long flags);
+extern void __iomem *__ioremap(unsigned long address, unsigned long size,
+		       unsigned long flags);
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @address:   bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+extern void __iomem *ioremap(unsigned long address, unsigned long size);
+
+#define ioremap_nocache(addr, size)	ioremap((addr), (size))
+extern int iounmap_explicit(volatile void __iomem *addr, unsigned long size);
+extern void iounmap(volatile void __iomem *addr);
+extern void __iomem * reserve_phb_iospace(unsigned long size);
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((unsigned long)address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)__va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/* We do NOT want virtual merging, it would put too much pressure on
+ * our iommu allocator. Instead, we want drivers to be smart enough
+ * to coalesce sglists that happen to have been mapped in a contiguous
+ * way by the iommu
+ */
+#define BIO_VMERGE_BOUNDARY	0
+
+#endif /* __KERNEL__ */
+
+static inline void iosync(void)
+{
+        __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O. 
+ * No distinction between read/write on PPC; use eieio for all three.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+/*
+ * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ * These routines do not perform EEH-related I/O address translation,
+ * and should not be used directly by device drivers.  Use inb/readb
+ * instead.
+ */
+static inline int in_8(const volatile unsigned char __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+static inline void out_8(volatile unsigned char __iomem *addr, int val)
+{
+	__asm__ __volatile__("stb%U0%X0 %1,%0; sync"
+			     : "=m" (*addr) : "r" (val));
+}
+
+static inline int in_le16(const volatile unsigned short __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "r" (addr), "m" (*addr));
+	return ret;
+}
+
+static inline int in_be16(const volatile unsigned short __iomem *addr)
+{
+	int ret;
+
+	__asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+static inline void out_le16(volatile unsigned short __iomem *addr, int val)
+{
+	__asm__ __volatile__("sthbrx %1,0,%2; sync"
+			     : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static inline void out_be16(volatile unsigned short __iomem *addr, int val)
+{
+	__asm__ __volatile__("sth%U0%X0 %1,%0; sync"
+			     : "=m" (*addr) : "r" (val));
+}
+
+static inline unsigned in_le32(const volatile unsigned __iomem *addr)
+{
+	unsigned ret;
+
+	__asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "r" (addr), "m" (*addr));
+	return ret;
+}
+
+static inline unsigned in_be32(const volatile unsigned __iomem *addr)
+{
+	unsigned ret;
+
+	__asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+static inline void out_le32(volatile unsigned __iomem *addr, int val)
+{
+	__asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr)
+			     : "r" (val), "r" (addr));
+}
+
+static inline void out_be32(volatile unsigned __iomem *addr, int val)
+{
+	__asm__ __volatile__("stw%U0%X0 %1,%0; sync"
+			     : "=m" (*addr) : "r" (val));
+}
+
+static inline unsigned long in_le64(const volatile unsigned long __iomem *addr)
+{
+	unsigned long tmp, ret;
+
+	__asm__ __volatile__(
+			     "ld %1,0(%2)\n"
+			     "twi 0,%1,0\n"
+			     "isync\n"
+			     "rldimi %0,%1,5*8,1*8\n"
+			     "rldimi %0,%1,3*8,2*8\n"
+			     "rldimi %0,%1,1*8,3*8\n"
+			     "rldimi %0,%1,7*8,4*8\n"
+			     "rldicl %1,%1,32,0\n"
+			     "rlwimi %0,%1,8,8,31\n"
+			     "rlwimi %0,%1,24,16,23\n"
+			     : "=r" (ret) , "=r" (tmp) : "b" (addr) , "m" (*addr));
+	return ret;
+}
+
+static inline unsigned long in_be64(const volatile unsigned long __iomem *addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ld%U1%X1 %0,%1; twi 0,%0,0; isync"
+			     : "=r" (ret) : "m" (*addr));
+	return ret;
+}
+
+static inline void out_le64(volatile unsigned long __iomem *addr, unsigned long val)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+			     "rldimi %0,%1,5*8,1*8\n"
+			     "rldimi %0,%1,3*8,2*8\n"
+			     "rldimi %0,%1,1*8,3*8\n"
+			     "rldimi %0,%1,7*8,4*8\n"
+			     "rldicl %1,%1,32,0\n"
+			     "rlwimi %0,%1,8,8,31\n"
+			     "rlwimi %0,%1,24,16,23\n"
+			     "std %0,0(%3)\n"
+			     "sync"
+			     : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr));
+}
+
+static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long val)
+{
+	__asm__ __volatile__("std%U0%X0 %1,%0; sync" : "=m" (*addr) : "r" (val));
+}
+
+#ifndef CONFIG_PPC_ISERIES 
+#include <asm/eeh.h>
+#endif
+
+#ifdef __KERNEL__
+
+/**
+ *	check_signature		-	find BIOS signatures
+ *	@io_addr: mmio address to check
+ *	@signature:  signature block
+ *	@length: length of signature
+ *
+ *	Perform a signature comparison with the mmio address io_addr. This
+ *	address should have been obtained by ioremap.
+ *	Returns 1 on a match.
+ */
+static inline int check_signature(const volatile void __iomem * io_addr,
+	const unsigned char *signature, int length)
+{
+	int retval = 0;
+#ifndef CONFIG_PPC_ISERIES 
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+#endif
+	return retval;
+}
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _PPC64_IO_H */
diff --git a/include/asm-ppc64/ioctl.h b/include/asm-ppc64/ioctl.h
new file mode 100644
index 000000000000..42b8c5da7fbc
--- /dev/null
+++ b/include/asm-ppc64/ioctl.h
@@ -0,0 +1,74 @@
+#ifndef _PPC64_IOCTL_H
+#define _PPC64_IOCTL_H
+
+
+/*
+ * This was copied from the alpha as it's a bit cleaner there.
+ *                         -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+       ((sizeof(t) == sizeof(t[1]) && \
+         sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+         sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* various drivers, such as the pcmcia stuff, need these... */
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _PPC64_IOCTL_H */
diff --git a/include/asm-ppc64/ioctls.h b/include/asm-ppc64/ioctls.h
new file mode 100644
index 000000000000..48796bf3e4fc
--- /dev/null
+++ b/include/asm-ppc64/ioctls.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_PPC64_IOCTLS_H
+#define _ASM_PPC64_IOCTLS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE        _IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* _ASM_PPC64_IOCTLS_H */
diff --git a/include/asm-ppc64/iommu.h b/include/asm-ppc64/iommu.h
new file mode 100644
index 000000000000..bd53ca4dcfa2
--- /dev/null
+++ b/include/asm-ppc64/iommu.h
@@ -0,0 +1,166 @@
+/*
+ * iommu.h
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IOMMU_H
+#define _ASM_IOMMU_H
+
+#include <asm/types.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+/*
+ * IOMAP_MAX_ORDER defines the largest contiguous block
+ * of dma (tce) space we can get.  IOMAP_MAX_ORDER = 13
+ * allows up to 2**12 pages (4096 * 4096) = 16 MB
+ */
+#define IOMAP_MAX_ORDER 13
+
+/*
+ * Tces come in two formats, one for the virtual bus and a different
+ * format for PCI
+ */
+#define TCE_VB  0
+#define TCE_PCI 1
+
+/* tce_entry
+ * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's
+ * abstracted so layout is irrelevant.
+ */
+union tce_entry {
+   	unsigned long te_word;
+	struct {
+		unsigned int  tb_cacheBits :6;	/* Cache hash bits - not used */
+		unsigned int  tb_rsvd      :6;
+		unsigned long tb_rpn       :40;	/* Real page number */
+		unsigned int  tb_valid     :1;	/* Tce is valid (vb only) */
+		unsigned int  tb_allio     :1;	/* Tce is valid for all lps (vb only) */
+		unsigned int  tb_lpindex   :8;	/* LpIndex for user of TCE (vb only) */
+		unsigned int  tb_pciwr     :1;	/* Write allowed (pci only) */
+		unsigned int  tb_rdwr      :1;	/* Read allowed  (pci), Write allowed (vb) */
+	} te_bits;
+#define te_cacheBits te_bits.tb_cacheBits
+#define te_rpn       te_bits.tb_rpn
+#define te_valid     te_bits.tb_valid
+#define te_allio     te_bits.tb_allio
+#define te_lpindex   te_bits.tb_lpindex
+#define te_pciwr     te_bits.tb_pciwr
+#define te_rdwr      te_bits.tb_rdwr
+};
+
+
+struct iommu_table {
+	unsigned long  it_busno;     /* Bus number this table belongs to */
+	unsigned long  it_size;      /* Size of iommu table in entries */
+	unsigned long  it_offset;    /* Offset into global table */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_index;     /* which iommu table this is */
+	unsigned long  it_type;      /* type: PCI or Virtual Bus */
+	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long  it_largehint; /* Hint for large allocs */
+	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+};
+
+#ifdef CONFIG_PPC_ISERIES
+struct iommu_table_cb {
+	unsigned long	itc_busno;	/* Bus number for this tce table */
+	unsigned long	itc_start;	/* Will be NULL for secondary */
+	unsigned long	itc_totalsize;	/* Size (in pages) of whole table */
+	unsigned long	itc_offset;	/* Index into real tce table of the
+					   start of our section */
+	unsigned long	itc_size;	/* Size (in pages) of our section */
+	unsigned long	itc_index;	/* Index of this tce table */
+	unsigned short	itc_maxtables;	/* Max num of tables for partition */
+	unsigned char	itc_virtbus;	/* Flag to indicate virtual bus */
+ 	unsigned char	itc_slotno;	/* IOA Tce Slot Index */
+ 	unsigned char	itc_rsvd[4];
+};
+
+extern struct iommu_table vio_tce_table;      /* Tce table for virtual bus */
+#endif /* CONFIG_PPC_ISERIES */
+
+struct scatterlist;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+
+/* Walks all buses and creates iommu tables */
+extern void iommu_setup_pSeries(void);
+extern void iommu_setup_u3(void);
+
+/* Frees table for an individual device node */
+extern void iommu_free_table(struct device_node *dn);
+
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_PPC_PSERIES
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_pSeries(struct device_node *dn);
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef CONFIG_PPC_ISERIES
+
+/* Walks all buses and creates iommu tables */
+extern void iommu_setup_iSeries(void);
+
+/* Initializes tables for bio buses */
+extern void __init iommu_vio_init(void);
+
+struct iSeries_Device_Node;
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_iSeries(struct iSeries_Device_Node *dn);
+
+#endif /* CONFIG_PPC_ISERIES */
+
+/* Initializes an iommu_table based in values set in the passed-in
+ * structure
+ */
+extern struct iommu_table *iommu_init_table(struct iommu_table * tbl);
+
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction);
+extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+		int nelems, enum dma_data_direction direction);
+
+extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
+		dma_addr_t *dma_handle, unsigned int __nocast flag);
+extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
+		void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
+		size_t size, enum dma_data_direction direction);
+extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
+		size_t size, enum dma_data_direction direction);
+
+extern void iommu_init_early_pSeries(void);
+extern void iommu_init_early_iSeries(void);
+extern void iommu_init_early_u3(void);
+
+extern void pci_iommu_init(void);
+extern void pci_direct_iommu_init(void);
+
+extern void alloc_u3_dart_table(void);
+
+#endif /* _ASM_IOMMU_H */
diff --git a/include/asm-ppc64/ipc.h b/include/asm-ppc64/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-ppc64/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-ppc64/ipcbuf.h b/include/asm-ppc64/ipcbuf.h
new file mode 100644
index 000000000000..fa393c8342af
--- /dev/null
+++ b/include/asm-ppc64/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef __PPC64_IPCBUF_H__
+#define __PPC64_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for the PPC is identical to kern_ipc_perm
+ * as we have always had 32-bit UIDs and GIDs in the kernel.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned int	seq;
+	unsigned int	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* __PPC64_IPCBUF_H__ */
diff --git a/include/asm-ppc64/irq.h b/include/asm-ppc64/irq.h
new file mode 100644
index 000000000000..570678b1da95
--- /dev/null
+++ b/include/asm-ppc64/irq.h
@@ -0,0 +1,115 @@
+#ifdef __KERNEL__
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+/*
+ * Maximum number of interrupt sources that we can handle.
+ */
+#define NR_IRQS		512
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ			(-1)
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK		0x1
+#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
+#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK	0x2
+#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+/* Interrupt numbers are virtual in case they are sparsely
+ * distributed by the hardware.
+ */
+extern unsigned int virt_irq_to_real_map[NR_IRQS];
+
+/* Create a mapping for a real_irq if it doesn't already exist.
+ * Return the virtual irq as a convenience.
+ */
+int virt_irq_create_mapping(unsigned int real_irq);
+void virt_irq_init(void);
+
+static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
+{
+	return virt_irq_to_real_map[virt_irq];
+}
+
+extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
+
+/*
+ * Because many systems have two overlapping names spaces for
+ * interrupts (ISA and XICS for example), and the ISA interrupts
+ * have historically not been easy to renumber, we allow ISA
+ * interrupts to take values 0 - 15, and shift up the remaining
+ * interrupts by 0x10.
+ */
+#define NUM_ISA_INTERRUPTS	0x10
+extern int __irq_offset_value;
+
+static inline int irq_offset_up(int irq)
+{
+	return(irq + __irq_offset_value);
+}
+
+static inline int irq_offset_down(int irq)
+{
+	return(irq - __irq_offset_value);
+}
+
+static inline int irq_offset_value(void)
+{
+	return __irq_offset_value;
+}
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_IRQ_event(int irq, struct pt_regs *regs,
+			struct irqaction *action, struct thread_info *tp);
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/kdebug.h b/include/asm-ppc64/kdebug.h
new file mode 100644
index 000000000000..488634258a72
--- /dev/null
+++ b/include/asm-ppc64/kdebug.h
@@ -0,0 +1,43 @@
+#ifndef _PPC64_KDEBUG_H
+#define _PPC64_KDEBUG_H 1
+
+/* nearly identical to x86_64/i386 code */
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args {
+	struct pt_regs *regs;
+	const char *str;
+	long err;
+	int trapnr;
+	int signr;
+};
+
+/*
+   Note - you should never unregister because that can race with NMIs.
+   If you really want to do it first unregister - then synchronize_kernel -
+   then free.
+ */
+int register_die_notifier(struct notifier_block *nb);
+extern struct notifier_block *ppc64_die_chain;
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_IABR_MATCH,
+	DIE_DABR_MATCH,
+	DIE_BPT,
+	DIE_SSTEP,
+	DIE_GPF,
+	DIE_PAGE_FAULT,
+};
+
+static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
+{
+	struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig };
+	return notifier_call_chain(&ppc64_die_chain, val, &args);
+}
+
+#endif
diff --git a/include/asm-ppc64/keylargo.h b/include/asm-ppc64/keylargo.h
new file mode 100644
index 000000000000..4d78e3d0314c
--- /dev/null
+++ b/include/asm-ppc64/keylargo.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/keylargo.h>
+
diff --git a/include/asm-ppc64/kmap_types.h b/include/asm-ppc64/kmap_types.h
new file mode 100644
index 000000000000..fd1574648223
--- /dev/null
+++ b/include/asm-ppc64/kmap_types.h
@@ -0,0 +1,23 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,	
+	KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/kprobes.h b/include/asm-ppc64/kprobes.h
new file mode 100644
index 000000000000..19b468bed059
--- /dev/null
+++ b/include/asm-ppc64/kprobes.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *  include/asm-ppc64/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct pt_regs;
+
+typedef unsigned int kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+#define MAX_INSN_SIZE 1
+
+#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
+
+#define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)((func_descr_t *)pentry)
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+#ifdef CONFIG_KPROBES
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#else				/* !CONFIG_KPROBES */
+static inline int kprobe_exceptions_notify(struct notifier_block *self,
+					   unsigned long val, void *data)
+{
+	return 0;
+}
+#endif
+#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-ppc64/linkage.h b/include/asm-ppc64/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-ppc64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-ppc64/lmb.h b/include/asm-ppc64/lmb.h
new file mode 100644
index 000000000000..a6cbca21ac1d
--- /dev/null
+++ b/include/asm-ppc64/lmb.h
@@ -0,0 +1,60 @@
+#ifndef _PPC64_LMB_H
+#define _PPC64_LMB_H
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <asm/prom.h>
+
+#define MAX_LMB_REGIONS 128
+
+#define LMB_ALLOC_ANYWHERE	0
+
+struct lmb_property {
+	unsigned long base;
+	unsigned long physbase;
+	unsigned long size;
+};
+
+struct lmb_region {
+	unsigned long cnt;
+	unsigned long size;
+	struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+	unsigned long debug;
+	unsigned long rmo_size;
+	struct lmb_region memory;
+	struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(unsigned long, unsigned long);
+extern long __init lmb_reserve(unsigned long, unsigned long);
+extern unsigned long __init lmb_alloc(unsigned long, unsigned long);
+extern unsigned long __init lmb_alloc_base(unsigned long, unsigned long,
+					   unsigned long);
+extern unsigned long __init lmb_phys_mem_size(void);
+extern unsigned long __init lmb_end_of_DRAM(void);
+extern unsigned long __init lmb_abs_to_phys(unsigned long);
+extern void __init lmb_enforce_memory_limit(void);
+
+extern void lmb_dump_all(void);
+
+extern unsigned long io_hole_start;
+
+#endif /* _PPC64_LMB_H */
diff --git a/include/asm-ppc64/local.h b/include/asm-ppc64/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/include/asm-ppc64/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/include/asm-ppc64/lppaca.h b/include/asm-ppc64/lppaca.h
new file mode 100644
index 000000000000..70766b5f26c1
--- /dev/null
+++ b/include/asm-ppc64/lppaca.h
@@ -0,0 +1,132 @@
+/*
+ * lppaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_LPPACA_H
+#define _ASM_LPPACA_H
+
+//=============================================================================
+//
+//	This control block contains the data that is shared between the
+//	hypervisor (PLIC) and the OS.
+//
+//
+//----------------------------------------------------------------------------
+#include <asm/types.h>
+
+struct lppaca
+{
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+// NOTE: The xDynXyz fields are fields that will be dynamically changed by
+// PLIC when preparing to bring a processor online or when dispatching a
+// virtual processor!
+//=============================================================================
+	u32	desc;			// Eye catcher 0xD397D781	x00-x03
+	u16	size;			// Size of this struct		x04-x05
+	u16	reserved1;		// Reserved			x06-x07
+	u16	reserved2:14;		// Reserved			x08-x09
+	u8	shared_proc:1;		// Shared processor indicator	...
+	u8	secondary_thread:1;	// Secondary thread indicator	...
+	volatile u8 dyn_proc_status:8;	// Dynamic Status of this proc	x0A-x0A
+	u8	secondary_thread_count;	// Secondary thread count	x0B-x0B
+	volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
+	volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
+	u32	decr_val;   		// Value for Decr programming 	x10-x13
+	u32	pmc_val;       		// Value for PMC regs         	x14-x17
+	volatile u32 dyn_hw_node_id;	// Dynamic Hardware Node id	x18-x1B
+	volatile u32 dyn_hw_proc_id;	// Dynamic Hardware Proc Id	x1C-x1F
+	volatile u32 dyn_pir;		// Dynamic ProcIdReg value	x20-x23
+	u32	dsei_data;           	// DSEI data                  	x24-x27
+	u64	sprg3;               	// SPRG3 value                	x28-x2F
+	u8	reserved3[80];		// Reserved			x30-x7F
+
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+	// This Dword contains a byte for each type of interrupt that can occur.
+	// The IPI is a count while the others are just a binary 1 or 0.
+	union {
+		u64	any_int;
+		struct {
+			u16	reserved;	// Reserved - cleared by #mpasmbl
+			u8	xirr_int;	// Indicates xXirrValue is valid or Immed IO
+			u8	ipi_cnt;	// IPI Count
+			u8	decr_int;	// DECR interrupt occurred
+			u8	pdc_int;	// PDC interrupt occurred
+			u8	quantum_int;	// Interrupt quantum reached
+			u8	old_plic_deferred_ext_int;	// Old PLIC has a deferred XIRR pending
+		} fields;
+	} int_dword;
+
+	// Whenever any fields in this Dword are set then PLIC will defer the
+	// processing of external interrupts.  Note that PLIC will store the
+	// XIRR directly into the xXirrValue field so that another XIRR will
+	// not be presented until this one clears.  The layout of the low
+	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+	// entire Dword is zero or not.  A non-zero value in the low order
+	// 2-bytes will result in SLIC being granted the highest thread
+	// priority upon return.  A 0 will return to SLIC as medium priority.
+	u64	plic_defer_ints_area;	// Entire Dword
+
+	// Used to pass the real SRR0/1 from PLIC to SLIC as well as to
+	// pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
+	u64	saved_srr0;		// Saved SRR0                   x10-x17
+	u64	saved_srr1;		// Saved SRR1                   x18-x1F
+
+	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
+	u64	saved_gpr3;		// Saved GPR3                   x20-x27
+	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
+	u64	saved_gpr5;		// Saved GPR5                   x30-x37
+
+	u8	reserved4;		// Reserved			x38-x38
+	u8	cpuctls_task_attrs;	// Task attributes for cpuctls  x39-x39
+	u8	fpregs_in_use;		// FP regs in use               x3A-x3A
+	u8	pmcregs_in_use;		// PMC regs in use              x3B-x3B
+	volatile u32 saved_decr;	// Saved Decr Value             x3C-x3F
+	volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
+	volatile u64 cur_plic_latency;	// Unaccounted PLIC latency     x48-x4F
+	u64	tot_plic_latency;	// Accumulated PLIC latency     x50-x57
+	u64	wait_state_cycles;	// Wait cycles for this proc    x58-x5F
+	u64	end_of_quantum;		// TB at end of quantum         x60-x67
+	u64	pdc_saved_sprg1;	// Saved SPRG1 for PMC int      x68-x6F
+	u64	pdc_saved_srr0;		// Saved SRR0 for PMC int       x70-x77
+	volatile u32 virtual_decr;	// Virtual DECR for shared procsx78-x7B
+	u16	slb_count;		// # of SLBs to maintain        x7C-x7D
+	u8	idle;			// Indicate OS is idle          x7E
+	u8	reserved5;		// Reserved                     x7F
+
+
+//=============================================================================
+// CACHE_LINE_3 0x0100 - 0x007F: This line is shared with other processors
+//=============================================================================
+	// This is the yield_count.  An "odd" value (low bit on) means that
+	// the processor is yielded (either because of an OS yield or a PLIC
+	// preempt).  An even value implies that the processor is currently
+	// executing.
+	// NOTE: This value will ALWAYS be zero for dedicated processors and
+	// will NEVER be zero for shared processors (ie, initialized to a 1).
+	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
+	u8	reserved6[124];		// Reserved                     x04-x7F
+
+//=============================================================================
+// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data
+//=============================================================================
+	u8	pmc_save_area[256];	// PMC interrupt Area           x00-xFF
+};
+
+#endif /* _ASM_LPPACA_H */
diff --git a/include/asm-ppc64/machdep.h b/include/asm-ppc64/machdep.h
new file mode 100644
index 000000000000..5d3cd9d042e2
--- /dev/null
+++ b/include/asm-ppc64/machdep.h
@@ -0,0 +1,185 @@
+#ifdef __KERNEL__
+#ifndef _PPC64_MACHDEP_H
+#define _PPC64_MACHDEP_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/setup.h>
+
+struct pt_regs;
+struct pci_bus;	
+struct device_node;
+struct iommu_table;
+struct rtc_time;
+struct file;
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+	void  (*message_pass)(int target, int msg);
+	int   (*probe)(void);
+	void  (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_enable)(unsigned int nr);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+#endif
+
+struct machdep_calls {
+	void            (*hpte_invalidate)(unsigned long slot,
+					   unsigned long va,
+					   int large,
+					   int local);
+	long		(*hpte_updatepp)(unsigned long slot, 
+					 unsigned long newpp, 
+					 unsigned long va,
+					 int large,
+					 int local);
+	void            (*hpte_updateboltedpp)(unsigned long newpp, 
+					       unsigned long ea);
+	long		(*hpte_insert)(unsigned long hpte_group,
+				       unsigned long va,
+				       unsigned long prpn,
+				       int secondary, 
+				       unsigned long hpteflags, 
+				       int bolted,
+				       int large);
+	long		(*hpte_remove)(unsigned long hpte_group);
+	void		(*flush_hash_range)(unsigned long context,
+					    unsigned long number,
+					    int local);
+	/* special for kexec, to be called in real mode, linar mapping is
+	 * destroyed as well */
+	void		(*hpte_clear_all)(void);
+
+	void		(*tce_build)(struct iommu_table * tbl,
+				     long index,
+				     long npages,
+				     unsigned long uaddr,
+				     enum dma_data_direction direction);
+	void		(*tce_free)(struct iommu_table *tbl,
+				    long index,
+				    long npages);
+	void		(*tce_flush)(struct iommu_table *tbl);
+	void		(*iommu_dev_setup)(struct pci_dev *dev);
+	void		(*iommu_bus_setup)(struct pci_bus *bus);
+
+	int		(*probe)(int platform);
+	void		(*setup_arch)(void);
+	void		(*init_early)(void);
+	/* Optional, may be NULL. */
+	void		(*get_cpuinfo)(struct seq_file *m);
+
+	void		(*init_IRQ)(void);
+	int		(*get_irq)(struct pt_regs *);
+
+	/* PCI stuff */
+	void		(*pcibios_fixup)(void);
+
+	void		(*restart)(char *cmd);
+	void		(*power_off)(void);
+	void		(*halt)(void);
+	void		(*panic)(char *str);
+	void		(*cpu_die)(void);
+
+	int		(*set_rtc_time)(struct rtc_time *);
+	void		(*get_rtc_time)(struct rtc_time *);
+	void		(*get_boot_time)(struct rtc_time *);
+
+	void		(*calibrate_decr)(void);
+
+	void		(*progress)(char *, unsigned short);
+
+	/* Debug interface.  Low level I/O to some terminal device */
+	void		(*udbg_putc)(unsigned char c);
+	unsigned char	(*udbg_getc)(void);
+	int		(*udbg_getc_poll)(void);
+
+	/* Interface for platform error logging */
+	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
+
+	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
+	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
+	ssize_t		(*nvram_size)(void);		
+	int		(*nvram_sync)(void);
+
+	/* Exception handlers */
+	void		(*system_reset_exception)(struct pt_regs *regs);
+	int 		(*machine_check_exception)(struct pt_regs *regs);
+
+	/* Motherboard/chipset features. This is a kind of general purpose
+	 * hook used to control some machine specific features (like reset
+	 * lines, chip power control, etc...).
+	 */
+	long	 	(*feature_call)(unsigned int feature, ...);
+
+	/* Check availability of legacy devices like i8042 */
+	int 		(*check_legacy_ioport)(unsigned int baseport);
+
+	/* Get legacy PCI/IDE interrupt mapping */ 
+	int		(*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
+	
+	/* Get access protection for /dev/mem */
+	pgprot_t	(*phys_mem_access_prot)(struct file *file,
+						unsigned long offset,
+						unsigned long size,
+						pgprot_t vma_prot);
+
+};
+
+extern struct machdep_calls ppc_md;
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * Power macintoshes have either a CUDA, PMU or SMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+	SYS_CTRLER_UNKNOWN = 0,
+	SYS_CTRLER_CUDA = 1,
+	SYS_CTRLER_PMU = 2,
+	SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+extern sys_ctrler_t sys_ctrler;
+
+#endif /* CONFIG_PPC_PMAC */
+
+
+
+/* Functions to produce codes on the leds.
+ * The SRC code should be unique for the message category and should
+ * be limited to the lower 24 bits (the upper 8 are set by these funcs),
+ * and (for boot & dump) should be sorted numerically in the order
+ * the events occur.
+ */
+/* Print a boot progress message. */
+void ppc64_boot_msg(unsigned int src, const char *msg);
+/* Print a termination message (print only -- does not stop the kernel) */
+void ppc64_terminate_msg(unsigned int src, const char *msg);
+/* Print something that needs attention (device error, etc) */
+void ppc64_attention_msg(unsigned int src, const char *msg);
+/* Print a dump progress message. */
+void ppc64_dump_msg(unsigned int src, const char *msg);
+
+static inline void log_error(char *buf, unsigned int err_type, int fatal)
+{
+	if (ppc_md.log_error)
+		ppc_md.log_error(buf, err_type, fatal);
+}
+
+#endif /* _PPC64_MACHDEP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/macio.h b/include/asm-ppc64/macio.h
new file mode 100644
index 000000000000..a3028b364f70
--- /dev/null
+++ b/include/asm-ppc64/macio.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/macio.h>
+
diff --git a/include/asm-ppc64/mc146818rtc.h b/include/asm-ppc64/mc146818rtc.h
new file mode 100644
index 000000000000..f713e1bbb533
--- /dev/null
+++ b/include/asm-ppc64/mc146818rtc.h
@@ -0,0 +1,32 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_PPC64_MC146818RTC_H
+#define __ASM_PPC64_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* __ASM_PPC64_MC146818RTC_H */
diff --git a/include/asm-ppc64/memory.h b/include/asm-ppc64/memory.h
new file mode 100644
index 000000000000..56e09face9a8
--- /dev/null
+++ b/include/asm-ppc64/memory.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_PPC64_MEMORY_H_ 
+#define _ASM_PPC64_MEMORY_H_ 
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Arguably the bitops and *xchg operations don't imply any memory barrier
+ * or SMP ordering, but in fact a lot of drivers expect them to imply
+ * both, since they do on x86 cpus.
+ */
+#ifdef CONFIG_SMP
+#define EIEIO_ON_SMP	"eieio\n"
+#define ISYNC_ON_SMP	"\n\tisync"
+#else
+#define EIEIO_ON_SMP
+#define ISYNC_ON_SMP
+#endif
+
+static inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void isync(void)
+{
+	__asm__ __volatile__ ("isync" : : : "memory");
+}
+
+#ifdef CONFIG_SMP
+#define eieio_on_smp()	eieio()
+#define isync_on_smp()	isync()
+#else
+#define eieio_on_smp()	__asm__ __volatile__("": : :"memory")
+#define isync_on_smp()	__asm__ __volatile__("": : :"memory")
+#endif
+
+/* Macros for adjusting thread priority (hardware multi-threading) */
+#define HMT_very_low()    asm volatile("or 31,31,31   # very low priority")
+#define HMT_low()	asm volatile("or 1,1,1		# low priority")
+#define HMT_medium_low()  asm volatile("or 6,6,6      # medium low priority")
+#define HMT_medium()	asm volatile("or 2,2,2		# medium priority")
+#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
+#define HMT_high()	asm volatile("or 3,3,3		# high priority")
+
+#define HMT_VERY_LOW    "\tor   31,31,31        # very low priority\n"
+#define HMT_LOW		"\tor	1,1,1		# low priority\n"
+#define HMT_MEDIUM_LOW  "\tor   6,6,6           # medium low priority\n"
+#define HMT_MEDIUM	"\tor	2,2,2		# medium priority\n"
+#define HMT_MEDIUM_HIGH "\tor   5,5,5           # medium high priority\n"
+#define HMT_HIGH	"\tor	3,3,3		# high priority\n"
+
+#endif
diff --git a/include/asm-ppc64/mman.h b/include/asm-ppc64/mman.h
new file mode 100644
index 000000000000..d4f93446a52c
--- /dev/null
+++ b/include/asm-ppc64/mman.h
@@ -0,0 +1,52 @@
+#ifndef __PPC64_MMAN_H__
+#define __PPC64_MMAN_H__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __PPC64_MMAN_H__ */
diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h
new file mode 100644
index 000000000000..188987e9d9d4
--- /dev/null
+++ b/include/asm-ppc64/mmu.h
@@ -0,0 +1,242 @@
+/*
+ * PowerPC memory management structures
+ *
+ * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
+ *   PPC64 rework.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_MMU_H_
+#define _PPC64_MMU_H_
+
+#include <linux/config.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+#ifndef __ASSEMBLY__
+
+/* Time to allow for more things here */
+typedef unsigned long mm_context_id_t;
+typedef struct {
+	mm_context_id_t id;
+#ifdef CONFIG_HUGETLB_PAGE
+	pgd_t *huge_pgdir;
+	u16 htlb_segs; /* bitmask */
+#endif
+} mm_context_t;
+
+#define STE_ESID_V	0x80
+#define STE_ESID_KS	0x20
+#define STE_ESID_KP	0x10
+#define STE_ESID_N	0x08
+
+#define STE_VSID_SHIFT	12
+
+struct stab_entry {
+	unsigned long esid_data;
+	unsigned long vsid_data;
+};
+
+/* Hardware Page Table Entry */
+
+#define HPTES_PER_GROUP 8
+
+typedef struct {
+	unsigned long avpn:57; /* vsid | api == avpn  */
+	unsigned long :     2; /* Software use */
+	unsigned long bolted: 1; /* HPTE is "bolted" */
+	unsigned long lock: 1; /* lock on pSeries SMP */
+	unsigned long l:    1; /* Virtual page is large (L=1) or 4 KB (L=0) */
+	unsigned long h:    1; /* Hash function identifier */
+	unsigned long v:    1; /* Valid (v=1) or invalid (v=0) */
+} Hpte_dword0;
+
+typedef struct {
+	unsigned long pp0:  1; /* Page protection bit 0 */
+	unsigned long ts:   1; /* Tag set bit */
+	unsigned long rpn: 50; /* Real page number */
+	unsigned long :     2; /* Reserved */
+	unsigned long ac:   1; /* Address compare */ 
+	unsigned long r:    1; /* Referenced */
+	unsigned long c:    1; /* Changed */
+	unsigned long w:    1; /* Write-thru cache mode */
+	unsigned long i:    1; /* Cache inhibited */
+	unsigned long m:    1; /* Memory coherence required */
+	unsigned long g:    1; /* Guarded */
+	unsigned long n:    1; /* No-execute */
+	unsigned long pp:   2; /* Page protection bits 1:2 */
+} Hpte_dword1;
+
+typedef struct {
+	char padding[6];	   	/* padding */
+	unsigned long :       6;	/* padding */ 
+	unsigned long flags: 10;	/* HPTE flags */
+} Hpte_dword1_flags;
+
+typedef struct {
+	union {
+		unsigned long dword0;
+		Hpte_dword0   dw0;
+	} dw0;
+
+	union {
+		unsigned long dword1;
+		Hpte_dword1 dw1;
+		Hpte_dword1_flags flags;
+	} dw1;
+} HPTE; 
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+/* pp0 will always be 0 for linux     */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+
+extern HPTE *		htab_address;
+extern unsigned long	htab_hash_mask;
+
+static inline unsigned long hpt_hash(unsigned long vpn, int large)
+{
+	unsigned long vsid;
+	unsigned long page;
+
+	if (large) {
+		vsid = vpn >> 4;
+		page = vpn & 0xf;
+	} else {
+		vsid = vpn >> 16;
+		page = vpn & 0xffff;
+	}
+
+	return (vsid & 0x7fffffffffUL) ^ page;
+}
+
+static inline void __tlbie(unsigned long va, int large)
+{
+	/* clear top 16 bits, non SLS segment */
+	va &= ~(0xffffULL << 48);
+
+	if (large) {
+		va &= HPAGE_MASK;
+		asm volatile("tlbie %0,1" : : "r"(va) : "memory");
+	} else {
+		va &= PAGE_MASK;
+		asm volatile("tlbie %0,0" : : "r"(va) : "memory");
+	}
+}
+
+static inline void tlbie(unsigned long va, int large)
+{
+	asm volatile("ptesync": : :"memory");
+	__tlbie(va, large);
+	asm volatile("eieio; tlbsync; ptesync": : :"memory");
+}
+
+static inline void __tlbiel(unsigned long va)
+{
+	/* clear top 16 bits, non SLS segment */
+	va &= ~(0xffffULL << 48);
+	va &= PAGE_MASK;
+
+	/* 
+	 * Thanks to Alan Modra we are now able to use machine specific 
+	 * assembly instructions (like tlbiel) by using the gas -many flag.
+	 * However we have to support older toolchains so for the moment 
+	 * we hardwire it.
+	 */
+#if 0
+	asm volatile("tlbiel %0" : : "r"(va) : "memory");
+#else
+	asm volatile(".long 0x7c000224 | (%0 << 11)" : : "r"(va) : "memory");
+#endif
+}
+
+static inline void tlbiel(unsigned long va)
+{
+	asm volatile("ptesync": : :"memory");
+	__tlbiel(va);
+	asm volatile("ptesync": : :"memory");
+}
+
+/*
+ * Handle a fault by adding an HPTE. If the address can't be determined
+ * to be valid via Linux page tables, return 1. If handled return 0
+ */
+extern int __hash_page(unsigned long ea, unsigned long access,
+		       unsigned long vsid, pte_t *ptep, unsigned long trap,
+		       int local);
+
+extern void htab_finish_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Location of cpu0's segment table
+ */
+#define STAB0_PAGE	0x9
+#define STAB0_PHYS_ADDR	(STAB0_PAGE<<PAGE_SHIFT)
+#define STAB0_VIRT_ADDR	(KERNELBASE+STAB0_PHYS_ADDR)
+
+#define SLB_NUM_BOLTED		3
+#define SLB_CACHE_ENTRIES	8
+
+/* Bits in the SLB ESID word */
+#define SLB_ESID_V		0x0000000008000000	/* entry is valid */
+
+/* Bits in the SLB VSID word */
+#define SLB_VSID_SHIFT		12
+#define SLB_VSID_KS		0x0000000000000800
+#define SLB_VSID_KP		0x0000000000000400
+#define SLB_VSID_N		0x0000000000000200	/* no-execute */
+#define SLB_VSID_L		0x0000000000000100	/* largepage (4M) */
+#define SLB_VSID_C		0x0000000000000080	/* class */
+
+#define SLB_VSID_KERNEL		(SLB_VSID_KP|SLB_VSID_C)
+#define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS)
+
+#define VSID_MULTIPLIER	ASM_CONST(200730139)	/* 28-bit prime */
+#define VSID_BITS	36
+#define VSID_MODULUS	((1UL<<VSID_BITS)-1)
+
+#define CONTEXT_BITS	20
+#define USER_ESID_BITS	15
+
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function.  Used in slb_allocate() and do_stab_bolted.  The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ *	rt = register continaing the proto-VSID and into which the
+ *		VSID will be stored
+ *	rx = scratch register (clobbered)
+ *
+ * 	- rt and rx must be different registers
+ * 	- The answer will end up in the low 36 bits of rt.  The higher
+ * 	  bits may contain other garbage, so you may need to mask the
+ * 	  result.
+ */
+#define ASM_VSID_SCRAMBLE(rt, rx)	\
+	lis	rx,VSID_MULTIPLIER@h;					\
+	ori	rx,rx,VSID_MULTIPLIER@l;				\
+	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
+									\
+	srdi	rx,rt,VSID_BITS;					\
+	clrldi	rt,rt,(64-VSID_BITS);					\
+	add	rt,rt,rx;		/* add high and low bits */	\
+	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
+	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
+	 * the bit clear, r3 already has the answer we want, if it	\
+	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
+	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS;	/* extract 2^36 bit */		\
+	add	rt,rt,rx
+
+#endif /* _PPC64_MMU_H_ */
diff --git a/include/asm-ppc64/mmu_context.h b/include/asm-ppc64/mmu_context.h
new file mode 100644
index 000000000000..c2e8e0466383
--- /dev/null
+++ b/include/asm-ppc64/mmu_context.h
@@ -0,0 +1,169 @@
+#ifndef __PPC64_MMU_CONTEXT_H
+#define __PPC64_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>	
+#include <linux/mm.h>	
+#include <asm/mmu.h>	
+#include <asm/cputable.h>
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 64;
+	return __ffs(b[2]) + 128;
+}
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#define NO_CONTEXT	0
+#define MAX_CONTEXT	(0x100000-1)
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
+extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+
+/*
+ * switch_mm is the entry point called from the architecture independent
+ * code in kernel/sched.c
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
+		cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile ("dssall");
+#endif /* CONFIG_ALTIVEC */
+
+	if (cpu_has_feature(CPU_FTR_SLB))
+		switch_slb(tsk, next);
+	else
+		switch_stab(tsk, next);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm(prev, next, current);
+	local_irq_restore(flags);
+}
+
+/* VSID allocation
+ * ===============
+ *
+ * We first generate a 36-bit "proto-VSID".  For kernel addresses this
+ * is equal to the ESID, for user addresses it is:
+ *	(context << 15) | (esid & 0x7fff)
+ *
+ * The two forms are distinguishable because the top bit is 0 for user
+ * addresses, whereas the top two bits are 1 for kernel addresses.
+ * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
+ * now.
+ *
+ * The proto-VSIDs are then scrambled into real VSIDs with the
+ * multiplicative hash:
+ *
+ *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
+ *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
+ *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
+ *
+ * This scramble is only well defined for proto-VSIDs below
+ * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
+ * reserved.  VSID_MULTIPLIER is prime, so in particular it is
+ * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
+ * Because the modulus is 2^n-1 we can compute it efficiently without
+ * a divide or extra multiply (see below).
+ *
+ * This scheme has several advantages over older methods:
+ *
+ * 	- We have VSIDs allocated for every kernel address
+ * (i.e. everything above 0xC000000000000000), except the very top
+ * segment, which simplifies several things.
+ *
+ * 	- We allow for 15 significant bits of ESID and 20 bits of
+ * context for user addresses.  i.e. 8T (43 bits) of address space for
+ * up to 1M contexts (although the page table structure and context
+ * allocation will need changes to take advantage of this).
+ *
+ * 	- The scramble function gives robust scattering in the hash
+ * table (at least based on some initial results).  The previous
+ * method was more susceptible to pathological cases giving excessive
+ * hash collisions.
+ */
+
+/*
+ * WARNING - If you change these you must make sure the asm
+ * implementations in slb_allocate(), do_stab_bolted and mmu.h
+ * (ASM_VSID_SCRAMBLE macro) are changed accordingly.
+ *
+ * You'll also need to change the precomputed VSID values in head.S
+ * which are used by the iSeries firmware.
+ */
+
+static inline unsigned long vsid_scramble(unsigned long protovsid)
+{
+#if 0
+	/* The code below is equivalent to this function for arguments
+	 * < 2^VSID_BITS, which is all this should ever be called
+	 * with.  However gcc is not clever enough to compute the
+	 * modulus (2^n-1) without a second multiply. */
+	return ((protovsid * VSID_MULTIPLIER) % VSID_MODULUS);
+#else /* 1 */
+	unsigned long x;
+
+	x = protovsid * VSID_MULTIPLIER;
+	x = (x >> VSID_BITS) + (x & VSID_MODULUS);
+	return (x + ((x+1) >> VSID_BITS)) & VSID_MODULUS;
+#endif /* 1 */
+}
+
+/* This is only valid for addresses >= KERNELBASE */
+static inline unsigned long get_kernel_vsid(unsigned long ea)
+{
+	return vsid_scramble(ea >> SID_SHIFT);
+}
+
+/* This is only valid for user addresses (which are below 2^41) */
+static inline unsigned long get_vsid(unsigned long context, unsigned long ea)
+{
+	return vsid_scramble((context << USER_ESID_BITS)
+			     | (ea >> SID_SHIFT));
+}
+
+#endif /* __PPC64_MMU_CONTEXT_H */
diff --git a/include/asm-ppc64/mmzone.h b/include/asm-ppc64/mmzone.h
new file mode 100644
index 000000000000..0619a41a3c9d
--- /dev/null
+++ b/include/asm-ppc64/mmzone.h
@@ -0,0 +1,94 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ *
+ * PowerPC64 port:
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <linux/config.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data *node_data[];
+
+/*
+ * Following are specific to this numa platform.
+ */
+
+extern int numa_cpu_lookup_table[];
+extern char *numa_memory_lookup_table;
+extern cpumask_t numa_cpumask_lookup_table[];
+extern int nr_cpus_in_node[];
+
+/* 16MB regions */
+#define MEMORY_INCREMENT_SHIFT 24
+#define MEMORY_INCREMENT (1UL << MEMORY_INCREMENT_SHIFT)
+
+/* NUMA debugging, will not work on a DLPAR machine */
+#undef DEBUG_NUMA
+
+static inline int pa_to_nid(unsigned long pa)
+{
+	int nid;
+
+	nid = numa_memory_lookup_table[pa >> MEMORY_INCREMENT_SHIFT];
+
+#ifdef DEBUG_NUMA
+	/* the physical address passed in is not in the map for the system */
+	if (nid == -1) {
+		printk("bad address: %lx\n", pa);
+		BUG();
+	}
+#endif
+
+	return nid;
+}
+
+#define pfn_to_nid(pfn)		pa_to_nid((pfn) << PAGE_SHIFT)
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
+
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+#define local_mapnr(kvaddr) \
+	( (__pa(kvaddr) >> PAGE_SHIFT) - node_start_pfn(kvaddr_to_nid(kvaddr)) 
+
+/* Written this way to avoid evaluating arguments twice */
+#define discontigmem_pfn_to_page(pfn) \
+({ \
+	unsigned long __tmp = pfn; \
+	(node_mem_map(pfn_to_nid(__tmp)) + \
+	 node_localnr(__tmp, pfn_to_nid(__tmp))); \
+})
+
+#define discontigmem_page_to_pfn(p) \
+({ \
+	struct page *__tmp = p; \
+	(((__tmp) - page_zone(__tmp)->zone_mem_map) + \
+	 page_zone(__tmp)->zone_start_pfn); \
+})
+
+/* XXX fix for discontiguous physical memory */
+#define discontigmem_pfn_valid(pfn)		((pfn) < num_physpages)
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-ppc64/module.h b/include/asm-ppc64/module.h
new file mode 100644
index 000000000000..0581607826e8
--- /dev/null
+++ b/include/asm-ppc64/module.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_PPC64_MODULE_H
+#define _ASM_PPC64_MODULE_H
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+struct mod_arch_specific
+{
+	/* Index of stubs section within module. */
+	unsigned int stubs_section;
+
+	/* What section is the TOC? */
+	unsigned int toc_section;
+
+	/* List of BUG addresses, source line numbers and filenames */
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+	unsigned int num_bugs;
+};
+
+extern struct bug_entry *module_find_bug(unsigned long bugaddr);
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+/* Make empty section for module_frob_arch_sections to expand. */
+#ifdef MODULE
+asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
+#endif
+
+struct exception_table_entry;
+void sort_ex_table(struct exception_table_entry *start,
+			struct exception_table_entry *finish);
+
+#endif /* _ASM_PPC64_MODULE_H */
diff --git a/include/asm-ppc64/msgbuf.h b/include/asm-ppc64/msgbuf.h
new file mode 100644
index 000000000000..31c1cbf133cc
--- /dev/null
+++ b/include/asm-ppc64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _PPC64_MSGBUF_H
+#define _PPC64_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for the PPC architecture.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _PPC64_MSGBUF_H */
diff --git a/include/asm-ppc64/naca.h b/include/asm-ppc64/naca.h
new file mode 100644
index 000000000000..bfb7caa32eaf
--- /dev/null
+++ b/include/asm-ppc64/naca.h
@@ -0,0 +1,31 @@
+#ifndef _NACA_H
+#define _NACA_H
+
+/* 
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+
+struct naca_struct {
+	/* Kernel only data - undefined for user space */
+	void *xItVpdAreas;              /* VPD Data                  0x00 */
+	void *xRamDisk;                 /* iSeries ramdisk           0x08 */
+	u64   xRamDiskSize;		/* In pages                  0x10 */
+};
+
+extern struct naca_struct naca;
+
+#endif /* __ASSEMBLY__ */
+
+#define NACA_PAGE      0x4
+#define NACA_PHYS_ADDR (NACA_PAGE<<PAGE_SHIFT)
+
+#endif /* _NACA_H */
diff --git a/include/asm-ppc64/namei.h b/include/asm-ppc64/namei.h
new file mode 100644
index 000000000000..a1412a2d102a
--- /dev/null
+++ b/include/asm-ppc64/namei.h
@@ -0,0 +1,23 @@
+/* 
+ * linux/include/asm-ppc/namei.h
+ * Adapted from linux/include/asm-alpha/namei.h
+ *
+ * Included from linux/fs/namei.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC64_NAMEI_H
+#define __PPC64_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __PPC64_NAMEI_H */
diff --git a/include/asm-ppc64/numnodes.h b/include/asm-ppc64/numnodes.h
new file mode 100644
index 000000000000..75ae0b906708
--- /dev/null
+++ b/include/asm-ppc64/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+/* Max 16 Nodes */
+#define NODES_SHIFT	4
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-ppc64/nvram.h b/include/asm-ppc64/nvram.h
new file mode 100644
index 000000000000..4e6dd370d936
--- /dev/null
+++ b/include/asm-ppc64/nvram.h
@@ -0,0 +1,115 @@
+/*
+ * PreP compliant NVRAM access
+ * This needs to be updated for PPC64
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_NVRAM_H
+#define _PPC64_NVRAM_H
+
+#define NVRW_CNT 0x20
+#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
+#define NVRAM_BLOCK_LEN 16
+#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
+#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
+
+#define NVRAM_AS0  0x74
+#define NVRAM_AS1  0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS	0x1FF9
+#define MOTO_RTC_MINUTES	0x1FFA
+#define MOTO_RTC_HOURS		0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK	0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
+#define MOTO_RTC_MONTH		0x1FFE
+#define MOTO_RTC_YEAR		0x1FFF
+#define MOTO_RTC_CONTROLA       0x1FF8
+#define MOTO_RTC_CONTROLB       0x1FF9
+
+#define NVRAM_SIG_SP	0x02	/* support processor */
+#define NVRAM_SIG_OF	0x50	/* open firmware config */
+#define NVRAM_SIG_FW	0x51	/* general firmware */
+#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
+#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
+#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
+#define NVRAM_SIG_SYS	0x70	/* system env vars */
+#define NVRAM_SIG_CFG	0x71	/* config data */
+#define NVRAM_SIG_ELOG	0x72	/* error log */
+#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
+#define NVRAM_SIG_FREE	0x7f	/* Free space */
+#define NVRAM_SIG_OS	0xa0	/* OS defined */
+#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
+
+/* If change this size, then change the size of NVNAME_LEN */
+struct nvram_header {
+	unsigned char signature;
+	unsigned char checksum;
+	unsigned short length;
+	char name[12];
+};
+
+struct nvram_partition {
+	struct list_head partition;
+	struct nvram_header header;
+	unsigned int index;
+};
+
+
+extern int nvram_write_error_log(char * buff, int length, unsigned int err_type);
+extern int nvram_read_error_log(char * buff, int length, unsigned int * err_type);
+extern int nvram_clear_error_log(void);
+extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
+
+extern int pSeries_nvram_init(void);
+extern int pmac_nvram_init(void);
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+/* Return partition offset in nvram */
+extern int	pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8	pmac_xpram_read(int xpaddr);
+extern void	pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern int	nvram_sync(void);
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+
+#endif /* _PPC64_NVRAM_H */
diff --git a/include/asm-ppc64/of_device.h b/include/asm-ppc64/of_device.h
new file mode 100644
index 000000000000..7bc136e22590
--- /dev/null
+++ b/include/asm-ppc64/of_device.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/of_device.h>
+
diff --git a/include/asm-ppc64/pSeries_reconfig.h b/include/asm-ppc64/pSeries_reconfig.h
new file mode 100644
index 000000000000..c0db1ea7f7d1
--- /dev/null
+++ b/include/asm-ppc64/pSeries_reconfig.h
@@ -0,0 +1,25 @@
+#ifndef _PPC64_PSERIES_RECONFIG_H
+#define _PPC64_PSERIES_RECONFIG_H
+
+#include <linux/notifier.h>
+
+/*
+ * Use this API if your code needs to know about OF device nodes being
+ * added or removed on pSeries systems.
+ */
+
+#define PSERIES_RECONFIG_ADD    0x0001
+#define PSERIES_RECONFIG_REMOVE 0x0002
+
+#ifdef CONFIG_PPC_PSERIES
+extern int pSeries_reconfig_notifier_register(struct notifier_block *);
+extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+#else /* !CONFIG_PPC_PSERIES */
+static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/include/asm-ppc64/paca.h b/include/asm-ppc64/paca.h
new file mode 100644
index 000000000000..1a0223b5f3b8
--- /dev/null
+++ b/include/asm-ppc64/paca.h
@@ -0,0 +1,119 @@
+#ifndef _PPC64_PACA_H
+#define _PPC64_PACA_H
+
+/*
+ * include/asm-ppc64/paca.h
+ *
+ * This control block defines the PACA which defines the processor 
+ * specific data for each logical processor on the system.  
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */    
+
+#include	<linux/config.h>
+#include	<asm/types.h>
+#include	<asm/lppaca.h>
+#include	<asm/iSeries/ItLpRegSave.h>
+#include	<asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+#define get_paca()	local_paca
+
+struct task_struct;
+struct ItLpQueue;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor except for the first two pointers that point to the
+ * lppaca area and the ItLpRegSave area for this CPU.  Both the
+ * lppaca and ItLpRegSave objects are currently contained within the
+ * PACA but they do not need to be.
+ */
+struct paca_struct {
+	/*
+	 * Because hw_cpu_id, unlike other paca fields, is accessed
+	 * routinely from other CPUs (from the IRQ code), we stick to
+	 * read-only (after boot) fields in the first cacheline to
+	 * avoid cacheline bouncing.
+	 */
+
+	/*
+	 * MAGIC: These first two pointers can't be moved - they're
+	 * accessed by the firmware
+	 */
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+	struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+
+	/*
+	 * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
+	 * load lock_token and paca_index with a single lwz
+	 * instruction.  They must travel together and be properly
+	 * aligned.
+	 */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+	u16 paca_index;			/* Logical processor number */
+
+	u32 default_decr;		/* Default decrementer value */
+	struct ItLpQueue *lpqueue_ptr;	/* LpQueue handled by this CPU */
+	u64 kernel_toc;			/* Kernel TOC address */
+	u64 stab_real;			/* Absolute address of segment table */
+	u64 stab_addr;			/* Virtual address of segment table */
+	void *emergency_sp;		/* pointer to emergency stack */
+	s16 hw_cpu_id;			/* Physical processor number */
+	u8 cpu_start;			/* At startup, processor spins until */
+					/* this becomes non-zero. */
+
+	/*
+	 * Now, starting in cacheline 2, the exception save areas
+	 */
+	u64 exgen[8] __attribute__((aligned(0x80))); /* used for most interrupts/exceptions */
+	u64 exmc[8];		/* used for machine checks */
+	u64 exslb[8];		/* used for SLB/segment table misses
+				 * on the linear mapping */
+	mm_context_t context;
+	u16 slb_cache[SLB_CACHE_ENTRIES];
+	u16 slb_cache_ptr;
+
+	/*
+	 * then miscellaneous read-write fields
+	 */
+	struct task_struct *__current;	/* Pointer to current */
+	u64 kstack;			/* Saved Kernel stack addr */
+	u64 stab_rr;			/* stab/slb round-robin counter */
+	u64 next_jiffy_update_tb;	/* TB value for next jiffy update */
+	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_msr;			/* MSR saved here by enter_rtas */
+	u32 lpevent_count;		/* lpevents processed  */
+	u8 proc_enabled;		/* irq soft-enable flag */
+
+	/* not yet used */
+	u64 exdsi[8];		/* used for linear mapping hash table misses */
+
+	/*
+	 * iSeries structure which the hypervisor knows about -
+	 * this structure should not cross a page boundary.
+	 * The vpa_init/register_vpa call is now known to fail if the
+	 * lppaca structure crosses a page boundary.
+	 * The lppaca is also used on POWER5 pSeries boxes.
+	 * The lppaca is 640 bytes long, and cannot readily change
+	 * since the hypervisor knows its layout, so a 1kB
+	 * alignment will suffice to ensure that it doesn't
+	 * cross a page boundary.
+	 */
+	struct lppaca lppaca __attribute__((__aligned__(0x400)));
+#ifdef CONFIG_PPC_ISERIES
+	struct ItLpRegSave reg_save;
+#endif
+};
+
+extern struct paca_struct paca[];
+
+#endif /* _PPC64_PACA_H */
diff --git a/include/asm-ppc64/page.h b/include/asm-ppc64/page.h
new file mode 100644
index 000000000000..20e0f19324e8
--- /dev/null
+++ b/include/asm-ppc64/page.h
@@ -0,0 +1,261 @@
+#ifndef _PPC64_PAGE_H
+#define _PPC64_PAGE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+#ifdef __ASSEMBLY__
+  #define ASM_CONST(x) x
+#else
+  #define __ASM_CONST(x) x##UL
+  #define ASM_CONST(x) __ASM_CONST(x)
+#endif
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(ASM_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PAGE_OFFSET_MASK (PAGE_SIZE-1)
+
+#define SID_SHIFT       28
+#define SID_MASK        0xfffffffffUL
+#define ESID_MASK	0xfffffffff0000000UL
+#define GET_ESID(x)     (((x) >> SID_SHIFT) & SID_MASK)
+
+#define HPAGE_SHIFT	24
+#define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+/* For 64-bit processes the hugepage range is 1T-1.5T */
+#define TASK_HPAGE_BASE ASM_CONST(0x0000010000000000)
+#define TASK_HPAGE_END 	ASM_CONST(0x0000018000000000)
+
+#define LOW_ESID_MASK(addr, len)	(((1U << (GET_ESID(addr+len-1)+1)) \
+	   	                	- (1U << GET_ESID(addr))) & 0xffff)
+
+#define ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#define ARCH_HAS_PREPARE_HUGEPAGE_RANGE
+
+#define touches_hugepage_low_range(mm, addr, len) \
+	(LOW_ESID_MASK((addr), (len)) & mm->context.htlb_segs)
+#define touches_hugepage_high_range(addr, len) \
+	(((addr) > (TASK_HPAGE_BASE-(len))) && ((addr) < TASK_HPAGE_END))
+
+#define __within_hugepage_low_range(addr, len, segmask) \
+	((LOW_ESID_MASK((addr), (len)) | (segmask)) == (segmask))
+#define within_hugepage_low_range(addr, len) \
+	__within_hugepage_low_range((addr), (len), \
+				    current->mm->context.htlb_segs)
+#define within_hugepage_high_range(addr, len) (((addr) >= TASK_HPAGE_BASE) \
+	  && ((addr)+(len) <= TASK_HPAGE_END) && ((addr)+(len) >= (addr)))
+
+#define is_hugepage_only_range(mm, addr, len) \
+	(touches_hugepage_high_range((addr), (len)) || \
+	  touches_hugepage_low_range((mm), (addr), (len)))
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+
+#define in_hugepage_area(context, addr) \
+	(cpu_has_feature(CPU_FTR_16M_PAGE) && \
+	 ( (((addr) >= TASK_HPAGE_BASE) && ((addr) < TASK_HPAGE_END)) || \
+	   ( ((addr) < 0x100000000L) && \
+	     ((1 << GET_ESID(addr)) & (context).htlb_segs) ) ) )
+
+#else /* !CONFIG_HUGETLB_PAGE */
+
+#define in_hugepage_area(mm, addr)	0
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
+
+/* to align the pointer to the (next) double word boundary */
+#define DOUBLEWORD_ALIGN(addr)	_ALIGN(addr,sizeof(unsigned long))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	_ALIGN(addr, PAGE_SIZE)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <asm/cache.h>
+
+#undef STRICT_MM_TYPECHECKS
+
+#define REGION_SIZE   4UL
+#define REGION_SHIFT  60UL
+#define REGION_MASK   (((1UL<<REGION_SIZE)-1UL)<<REGION_SHIFT)
+#define REGION_STRIDE (1UL << REGION_SHIFT)
+
+static __inline__ void clear_page(void *addr)
+{
+	unsigned long lines, line_size;
+
+	line_size = ppc64_caches.dline_size;
+	lines = ppc64_caches.dlines_per_page;
+
+	__asm__ __volatile__(
+	"mtctr  	%1	# clear_page\n\
+1:      dcbz  	0,%0\n\
+	add	%0,%0,%3\n\
+	bdnz+	1b"
+        : "=r" (addr)
+        : "r" (lines), "0" (addr), "r" (line_size)
+	: "ctr", "memory");
+}
+
+extern void copy_page(void *to, void *from);
+struct page;
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *p);
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking.  
+ * Entries in the pte table are 64b, while entries in the pgd & pmd are 32b.
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned int  pmd; } pmd_t;
+typedef struct { unsigned int  pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned int  pmd_t;
+typedef unsigned int  pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pmd(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
+
+extern int page_is_ram(unsigned long pfn);
+
+extern u64 ppc64_pft_size;		/* Log 2 of page table size */
+
+/* We do define AT_SYSINFO_EHDR but don't use the gate mecanism */
+#define __HAVE_ARCH_GATE_AREA		1
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef MODULE
+#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
+#else
+#define __page_aligned \
+	__attribute__((__aligned__(PAGE_SIZE), \
+		__section__(".data.page_aligned")))
+#endif
+
+
+/* This must match the -Ttext linker address            */
+/* Note: tophys & tovirt make assumptions about how     */
+/*       KERNELBASE is defined for performance reasons. */
+/*       When KERNELBASE moves, those macros may have   */
+/*             to change!                               */
+#define PAGE_OFFSET     ASM_CONST(0xC000000000000000)
+#define KERNELBASE      PAGE_OFFSET
+#define VMALLOCBASE     ASM_CONST(0xD000000000000000)
+#define IOREGIONBASE    ASM_CONST(0xE000000000000000)
+
+#define IO_REGION_ID       (IOREGIONBASE>>REGION_SHIFT)
+#define VMALLOC_REGION_ID  (VMALLOCBASE>>REGION_SHIFT)
+#define KERNEL_REGION_ID   (KERNELBASE>>REGION_SHIFT)
+#define USER_REGION_ID     (0UL)
+#define REGION_ID(X)	   (((unsigned long)(X))>>REGION_SHIFT)
+
+#define __bpn_to_ba(x) ((((unsigned long)(x))<<PAGE_SHIFT) + KERNELBASE)
+#define __ba_to_bpn(x) ((((unsigned long)(x)) & ~REGION_MASK) >> PAGE_SHIFT)
+
+#define __va(x) ((void *)((unsigned long)(x) + KERNELBASE))
+
+#ifdef CONFIG_DISCONTIGMEM
+#define page_to_pfn(page)	discontigmem_page_to_pfn(page)
+#define pfn_to_page(pfn)	discontigmem_pfn_to_page(pfn)
+#define pfn_valid(pfn)		discontigmem_pfn_valid(pfn)
+#else
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+/*
+ * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
+ * and needs to be executable.  This means the whole heap ends
+ * up being executable.
+ */
+#define VM_DATA_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
+
+/*
+ * This is the default if a program doesn't have a PT_GNU_STACK
+ * program header entry.
+ */
+#define VM_STACK_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_PAGE_H */
diff --git a/include/asm-ppc64/param.h b/include/asm-ppc64/param.h
new file mode 100644
index 000000000000..1fad38dcf707
--- /dev/null
+++ b/include/asm-ppc64/param.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_PPC64_PARAM_H
+#define _ASM_PPC64_PARAM_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+# define HZ		1000		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_PPC64_PARAM_H */
diff --git a/include/asm-ppc64/parport.h b/include/asm-ppc64/parport.h
new file mode 100644
index 000000000000..2f8874c581cc
--- /dev/null
+++ b/include/asm-ppc64/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_PPC64_PARPORT_H
+#define _ASM_PPC64_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_PPC_PARPORT_H) */
diff --git a/include/asm-ppc64/pci-bridge.h b/include/asm-ppc64/pci-bridge.h
new file mode 100644
index 000000000000..c4f9023ea5ed
--- /dev/null
+++ b/include/asm-ppc64/pci-bridge.h
@@ -0,0 +1,90 @@
+#ifdef __KERNEL__
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/pci.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+	void *arch_data;
+	struct list_head list_node;
+
+	int first_busno;
+	int last_busno;
+
+	void __iomem *io_base_virt;
+	unsigned long io_base_phys;
+
+	/* Some machines have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	unsigned long pci_mem_offset;
+	unsigned long pci_io_size;
+
+	struct pci_ops *ops;
+	volatile unsigned int __iomem *cfg_addr;
+	volatile unsigned char __iomem *cfg_data;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource io_resource;
+	struct resource mem_resources[3];
+	int global_number;		
+	int local_number;		
+	unsigned long buid;
+	unsigned long dma_window_base_cur;
+	unsigned long dma_window_size;
+};
+
+struct device_node *fetch_dev_dn(struct pci_dev *dev);
+
+/* Get a device_node from a pci_dev.  This code must be fast except in the case
+ * where the sysdata is incorrect and needs to be fixed up (hopefully just once)
+ */
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
+{
+	struct device_node *dn = dev->sysdata;
+
+	if (dn->devfn == dev->devfn && dn->busno == dev->bus->number)
+		return dn;	/* fast path.  sysdata is good */
+	else
+		return fetch_dev_dn(dev);
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	else
+		return bus->sysdata; /* Must be root bus (PHB) */
+}
+
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+					 struct device_node *dev);
+
+extern int pcibios_remove_root_bus(struct pci_controller *phb);
+
+extern void phbs_remap_io(void);
+
+static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
+{
+	struct device_node *busdn = bus->sysdata;
+
+	BUG_ON(busdn == NULL);
+	return busdn->phb;
+}
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
new file mode 100644
index 000000000000..6cd593f660a0
--- /dev/null
+++ b/include/asm-ppc64/pci.h
@@ -0,0 +1,142 @@
+#ifndef __PPC64_PCI_H
+#define __PPC64_PCI_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machdep.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#include <asm-generic/pci-dma-compat.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+#ifdef CONFIG_PPC_ISERIES
+#define pcibios_scan_all_fns(a, b)	0
+#else
+extern int pcibios_scan_all_fns(struct pci_bus *bus, int devfn);
+#endif
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	if (ppc_md.pci_get_legacy_ide_irq)
+		return ppc_md.pci_get_legacy_ide_irq(dev, channel);
+	return channel ? 15 : 14;
+}
+
+#define HAVE_ARCH_PCI_MWI 1
+static inline int pcibios_prep_mwi(struct pci_dev *dev)
+{
+	/*
+	 * We would like to avoid touching the cacheline size or MWI bit
+	 * but we cant do that with the current pcibios_prep_mwi 
+	 * interface. pSeries firmware sets the cacheline size (which is not
+	 * the cpu cacheline size in all cases) and hardware treats MWI 
+	 * the same as memory write. So we dont touch the cacheline size
+	 * here and allow the generic code to set the MWI bit.
+	 */
+	return 0;
+}
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+extern struct dma_mapping_ops pci_dma_ops;
+
+/* For DAC DMA, we currently don't support it by default, but
+ * we let the platform override this
+ */
+static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask)
+{
+	if (pci_dma_ops.dac_dma_supported)
+		return pci_dma_ops.dac_dma_supported(&hwdev->dev, mask);
+	return 0;
+}
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+	
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern int
+unmap_bus_range(struct pci_bus *bus);
+
+extern int
+remap_bus_range(struct pci_bus *bus);
+
+extern void
+pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+extern void pcibios_add_platform_entries(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long offset,
+					 unsigned long size,
+					 pgprot_t prot);
+
+
+#endif	/* __KERNEL__ */
+
+#endif /* __PPC64_PCI_H */
diff --git a/include/asm-ppc64/percpu.h b/include/asm-ppc64/percpu.h
new file mode 100644
index 000000000000..60a659a4ce1f
--- /dev/null
+++ b/include/asm-ppc64/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_PPC64_PERCPU__
+#define __ARCH_PPC64_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_PPC64_PERCPU__ */
diff --git a/include/asm-ppc64/pgalloc.h b/include/asm-ppc64/pgalloc.h
new file mode 100644
index 000000000000..16232d740173
--- /dev/null
+++ b/include/asm-ppc64/pgalloc.h
@@ -0,0 +1,91 @@
+#ifndef _PPC64_PGALLOC_H
+#define _PPC64_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+
+extern kmem_cache_t *zero_cache;
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline pgd_t *
+pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(zero_cache, GFP_KERNEL);
+}
+
+static inline void
+pgd_free(pgd_t *pgd)
+{
+	kmem_cache_free(zero_cache, pgd);
+}
+
+#define pgd_populate(MM, PGD, PMD)	pgd_set(PGD, PMD)
+
+static inline pmd_t *
+pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(zero_cache, GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void
+pmd_free(pmd_t *pmd)
+{
+	kmem_cache_free(zero_cache, pmd);
+}
+
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte)
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	return kmem_cache_alloc(zero_cache, GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte = kmem_cache_alloc(zero_cache, GFP_KERNEL|__GFP_REPEAT);
+	if (pte)
+		return virt_to_page(pte);
+	return NULL;
+}
+		
+static inline void pte_free_kernel(pte_t *pte)
+{
+	kmem_cache_free(zero_cache, pte);
+}
+
+static inline void pte_free(struct page *ptepage)
+{
+	kmem_cache_free(zero_cache, page_address(ptepage));
+}
+
+struct pte_freelist_batch
+{
+	struct rcu_head	rcu;
+	unsigned int	index;
+	struct page *	pages[0];
+};
+
+#define PTE_FREELIST_SIZE	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) / \
+				  sizeof(struct page *))
+
+extern void pte_free_now(struct page *ptepage);
+extern void pte_free_submit(struct pte_freelist_batch *batch);
+
+DECLARE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
+
+void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage);
+#define __pmd_free_tlb(tlb, pmd)	__pte_free_tlb(tlb, virt_to_page(pmd))
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _PPC64_PGALLOC_H */
diff --git a/include/asm-ppc64/pgtable.h b/include/asm-ppc64/pgtable.h
new file mode 100644
index 000000000000..4c4824653e80
--- /dev/null
+++ b/include/asm-ppc64/pgtable.h
@@ -0,0 +1,602 @@
+#ifndef _PPC64_PGTABLE_H
+#define _PPC64_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#endif /* __ASSEMBLY__ */
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT - 3) + (PAGE_SHIFT - 2))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for 
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  10
+#define PGD_INDEX_SIZE  10
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+#define USER_PTRS_PER_PGD	(1024)
+#define FIRST_USER_PGD_NR	0
+
+#define EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+                    PGD_INDEX_SIZE + PAGE_SHIFT) 
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EA_BITS	41
+#define PGTABLE_EA_MASK	((1UL<<PGTABLE_EA_BITS)-1)
+
+/*
+ * Define the address range of the vmalloc VM area.
+ */
+#define VMALLOC_START (0xD000000000000000ul)
+#define VMALLOC_END   (VMALLOC_START + PGTABLE_EA_MASK)
+
+/*
+ * Define the address range of the imalloc VM area.
+ * (used for ioremap)
+ */
+#define IMALLOC_START     (ioremap_bot)
+#define IMALLOC_VMADDR(x) ((unsigned long)(x))
+#define PHBS_IO_BASE  	  (0xE000000000000000ul)	/* Reserve 2 gigs for PHBs */
+#define IMALLOC_BASE      (0xE000000080000000ul)  
+#define IMALLOC_END       (IMALLOC_BASE + PGTABLE_EA_MASK)
+
+/*
+ * Define the user address range
+ */
+#define USER_START (0UL)
+#define USER_END   (USER_START + PGTABLE_EA_MASK)
+
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+#define _PAGE_PRESENT	0x0001 /* software: pte contains a translation */
+#define _PAGE_USER	0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE	0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC	0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED	0x0008
+#define _PAGE_COHERENT	0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY	0x0080 /* C: page changed */
+#define _PAGE_ACCESSED	0x0100 /* R: page referenced */
+#define _PAGE_RW	0x0200 /* software: user write access allowed */
+#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_BUSY	0x0800 /* software: PTE & hash are busy */ 
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
+#define _PAGE_HUGE	0x10000 /* 16MB page */
+/* Bits 0x7000 identify the index within an HPT Group */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_SECONDARY | _PAGE_GROUP_IX)
+/* PAGE_MASK gives the right answer below, but only by accident */
+/* It should be preserving the high 48 bits and then specifically */
+/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HPTEFLAGS)
+
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
+
+/* __pgprot defined in asm-ppc64/page.h */
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_WRENABLE)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+			       _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
+
+#define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
+#define HAVE_PAGE_AGP
+
+/*
+ * This bit in a hardware PTE indicates that the page is *not* executable.
+ */
+#define HW_NO_EXEC	_PAGE_EXEC
+
+/*
+ * POWER4 and newer have per page execute protection, older chips can only
+ * do this on a segment (256MB) basis.
+ *
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif /* __ASSEMBLY__ */
+
+/* shift to put page number into pte */
+#define PTE_SHIFT (17)
+
+/* We allow 2^41 bytes of real memory, so we need 29 bits in the PMD
+ * to give the PTE page number.  The bottom two bits are for flags. */
+#define PMD_TO_PTEPAGE_SHIFT (2)
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#ifndef __ASSEMBLY__
+int hash_huge_page(struct mm_struct *mm, unsigned long access,
+		   unsigned long ea, unsigned long vsid, int local);
+
+void hugetlb_mm_free_pgd(struct mm_struct *mm);
+#endif /* __ASSEMBLY__ */
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+#else
+
+#define hash_huge_page(mm,a,ea,vsid,local)	-1
+#define hugetlb_mm_free_pgd(mm)			do {} while (0)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * mk_pte takes a (struct page *) as input
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+#define pfn_pte(pfn,pgprot)						\
+({									\
+	pte_t pte;							\
+	pte_val(pte) = ((unsigned long)(pfn) << PTE_SHIFT) |   		\
+                        pgprot_val(pgprot);				\
+	pte;								\
+})
+
+#define pte_modify(_pte, newprot) \
+  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+
+#define pte_none(pte)		((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/* pte_clear moved to later in this file */
+
+#define pte_pfn(x)		((unsigned long)((pte_val(x) >> PTE_SHIFT)))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define pmd_set(pmdp, ptep) 	\
+	(pmd_val(*(pmdp)) = (__ba_to_bpn(ptep) << PMD_TO_PTEPAGE_SHIFT))
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) == 0)
+#define	pmd_present(pmd)	(pmd_val(pmd) != 0)
+#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
+#define pmd_page_kernel(pmd)	\
+	(__bpn_to_ba(pmd_val(pmd) >> PMD_TO_PTEPAGE_SHIFT))
+#define pmd_page(pmd)		virt_to_page(pmd_page_kernel(pmd))
+#define pgd_set(pgdp, pmdp)	(pgd_val(*(pgdp)) = (__ba_to_bpn(pmdp)))
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		((pgd_val(pgd)) == 0)
+#define pgd_present(pgd)	(pgd_val(pgd) != 0UL)
+#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0UL)
+#define pgd_page(pgd)		(__bpn_to_ba(pgd_val(pgd))) 
+
+/* 
+ * Find an entry in a page-table-directory.  We combine the address region 
+ * (the high order N bits) and the pgd portion of the address.
+ */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x7ff)
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir,addr) \
+  ((pmd_t *) pgd_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_offset_kernel(dir,addr) \
+  ((pte_t *) pmd_page_kernel(*(dir)) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+#define pte_unmap_nested(pte)		do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in the ioremap page-table-directory */
+#define pgd_offset_i(address) (ioremap_pgd + pgd_index(address))
+
+#define pages_to_mb(x)		((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_USER;}
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC;}
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
+static inline int pte_huge(pte_t pte) { return pte_val(pte) & _PAGE_HUGE;}
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_exprotect(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) {
+	pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) {
+	pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+	pte_val(pte) |= _PAGE_HUGE; return pte; }
+
+/* Atomic PTE updates */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "m" (*p), "i" (_PAGE_BUSY)
+	: "cc" );
+	return old;
+}
+
+/* PTE updating functions, this function puts the PTE in the
+ * batch, doesn't actually triggers the hash flush immediately,
+ * you need to call flush_tlb_pending() to do that.
+ */
+extern void hpte_update(struct mm_struct *mm, unsigned long addr, unsigned long pte,
+			int wrprot);
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(ptep, _PAGE_ACCESSED);
+	if (old & _PAGE_HASHPTE) {
+		hpte_update(mm, addr, old, 0);
+		flush_tlb_pending();
+	}
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+/*
+ * On RW/DIRTY bit transitions we can avoid flushing the hpte. For the
+ * moment we always flush but we need to fix hpte_update and test if the
+ * optimisation is worth it.
+ */
+static inline int __ptep_test_and_clear_dirty(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & _PAGE_DIRTY) == 0)
+		return 0;
+	old = pte_update(ptep, _PAGE_DIRTY);
+	if (old & _PAGE_HASHPTE)
+		hpte_update(mm, addr, old, 0);
+	return (old & _PAGE_DIRTY) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define ptep_test_and_clear_dirty(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_dirty((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+       		return;
+	old = pte_update(ptep, _PAGE_RW);
+	if (old & _PAGE_HASHPTE)
+		hpte_update(mm, addr, old, 0);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
+#define ptep_clear_flush_dirty(__vma, __address, __ptep)		\
+({									\
+	int __dirty = __ptep_test_and_clear_dirty((__vma)->vm_mm, __address, \
+						  __ptep); 		\
+	flush_tlb_page(__vma, __address);				\
+	__dirty;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(ptep, ~0UL);
+
+	if (old & _PAGE_HASHPTE)
+		hpte_update(mm, addr, old, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t * ptep)
+{
+	unsigned long old = pte_update(ptep, ~0UL);
+
+	if (old & _PAGE_HASHPTE)
+		hpte_update(mm, addr, old, 0);
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (pte_present(*ptep)) {
+		pte_clear(mm, addr, ptep);
+		flush_tlb_pending();
+	}
+	*ptep = __pte(pte_val(pte)) & ~_PAGE_HPTEFLAGS;
+}
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+	do {								   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);	   \
+		flush_tlb_page_nohash(__vma, __address);	       	   \
+	} while(0)
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+extern unsigned long ioremap_bot, ioremap_base;
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08x.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08x.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pgd_t swapper_pg_dir[1024];
+extern pgd_t ioremap_dir[1024];
+
+extern void paging_init(void);
+
+struct mmu_gather;
+void hugetlb_free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *prev,
+			   unsigned long start, unsigned long end);
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to put a corresponding HPTE into the hash table
+ * ahead of time, instead of waiting for the inevitable extra
+ * hash-table miss exception.
+ */
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> 1) & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> PTE_SHIFT })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << PTE_SHIFT })
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PTE_SHIFT)
+#define pgoff_to_pte(off)	((pte_t) {((off) << PTE_SHIFT)|_PAGE_FILE})
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_SHIFT)
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address.  Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test.  What should we do here?
+ * The only use is in fs/ncpfs/dir.c
+ */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+void pgtable_cache_init(void);
+
+extern void hpte_init_native(void);
+extern void hpte_init_lpar(void);
+extern void hpte_init_iSeries(void);
+
+/* imalloc region types */
+#define IM_REGION_UNUSED	0x1
+#define IM_REGION_SUBSET	0x2
+#define IM_REGION_EXISTS	0x4
+#define IM_REGION_OVERLAP	0x8
+#define IM_REGION_SUPERSET	0x10
+
+extern struct vm_struct * im_get_free_area(unsigned long size);
+extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size,
+			int region_type);
+unsigned long im_free(void *addr);
+
+extern long pSeries_lpar_hpte_insert(unsigned long hpte_group,
+				     unsigned long va, unsigned long prpn,
+				     int secondary, unsigned long hpteflags,
+				     int bolted, int large);
+
+extern long native_hpte_insert(unsigned long hpte_group, unsigned long va,
+			       unsigned long prpn, int secondary,
+			       unsigned long hpteflags, int bolted, int large);
+
+/*
+ * find_linux_pte returns the address of a linux pte for a given 
+ * effective address and directory.  If not found, it returns zero.
+ */
+static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
+{
+	pgd_t *pg;
+	pmd_t *pm;
+	pte_t *pt = NULL;
+	pte_t pte;
+
+	pg = pgdir + pgd_index(ea);
+	if (!pgd_none(*pg)) {
+
+		pm = pmd_offset(pg, ea);
+		if (pmd_present(*pm)) { 
+			pt = pte_offset_kernel(pm, ea);
+			pte = *pt;
+			if (!pte_present(pte))
+				pt = NULL;
+		}
+	}
+
+	return pt;
+}
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PPC64_PGTABLE_H */
diff --git a/include/asm-ppc64/plpar_wrappers.h b/include/asm-ppc64/plpar_wrappers.h
new file mode 100644
index 000000000000..f4a5fb7d67c7
--- /dev/null
+++ b/include/asm-ppc64/plpar_wrappers.h
@@ -0,0 +1,111 @@
+#ifndef _PPC64_PLPAR_WRAPPERS_H
+#define _PPC64_PLPAR_WRAPPERS_H
+
+#include <asm/hvcall.h>
+
+static inline long poll_pending(void)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0,
+			   &dummy, &dummy, &dummy);
+}
+
+static inline long prod_processor(void)
+{
+	plpar_hcall_norets(H_PROD);
+	return(0); 
+}
+
+static inline long cede_processor(void)
+{
+	plpar_hcall_norets(H_CEDE);
+	return(0); 
+}
+
+static inline long register_vpa(unsigned long flags, unsigned long proc,
+				unsigned long vpa)
+{
+	return plpar_hcall_norets(H_REGISTER_VPA, flags, proc, vpa);
+}
+
+void vpa_init(int cpu);
+
+static inline long plpar_pte_remove(unsigned long flags,
+				    unsigned long ptex,
+				    unsigned long avpn,
+				    unsigned long *old_pteh_ret,
+				    unsigned long *old_ptel_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0,
+			   old_pteh_ret, old_ptel_ret, &dummy);
+}
+
+static inline long plpar_pte_read(unsigned long flags,
+				  unsigned long ptex,
+				  unsigned long *old_pteh_ret, unsigned long *old_ptel_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_READ, flags, ptex, 0, 0,
+			   old_pteh_ret, old_ptel_ret, &dummy);
+}
+
+static inline long plpar_pte_protect(unsigned long flags,
+				     unsigned long ptex,
+				     unsigned long avpn)
+{
+	return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn);
+}
+
+static inline long plpar_tce_get(unsigned long liobn,
+				 unsigned long ioba,
+				 unsigned long *tce_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0,
+			   tce_ret, &dummy, &dummy);
+}
+
+static inline long plpar_tce_put(unsigned long liobn,
+				 unsigned long ioba,
+				 unsigned long tceval)
+{
+	return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval);
+}
+
+static inline long plpar_tce_put_indirect(unsigned long liobn,
+					  unsigned long ioba,
+					  unsigned long page,
+					  unsigned long count)
+{
+	return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count);
+}
+
+static inline long plpar_tce_stuff(unsigned long liobn,
+				   unsigned long ioba,
+				   unsigned long tceval,
+				   unsigned long count)
+{
+	return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count);
+}
+
+static inline long plpar_get_term_char(unsigned long termno,
+				       unsigned long *len_ret,
+				       char *buf_ret)
+{
+	unsigned long *lbuf = (unsigned long *)buf_ret;  /* ToDo: alignment? */
+	return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0,
+			   len_ret, lbuf+0, lbuf+1);
+}
+
+static inline long plpar_put_term_char(unsigned long termno,
+				       unsigned long len,
+				       const char *buffer)
+{
+	unsigned long *lbuf = (unsigned long *)buffer;  /* ToDo: alignment? */
+	return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0],
+				  lbuf[1]);
+}
+
+
+#endif /* _PPC64_PLPAR_WRAPPERS_H */
diff --git a/include/asm-ppc64/pmac_feature.h b/include/asm-ppc64/pmac_feature.h
new file mode 100644
index 000000000000..e07e36c4cbb2
--- /dev/null
+++ b/include/asm-ppc64/pmac_feature.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/pmac_feature.h>
+
diff --git a/include/asm-ppc64/pmac_low_i2c.h b/include/asm-ppc64/pmac_low_i2c.h
new file mode 100644
index 000000000000..7bcfc72c5c8a
--- /dev/null
+++ b/include/asm-ppc64/pmac_low_i2c.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/pmac_low_i2c.h>
+
diff --git a/include/asm-ppc64/pmc.h b/include/asm-ppc64/pmc.h
new file mode 100644
index 000000000000..c924748c0bea
--- /dev/null
+++ b/include/asm-ppc64/pmc.h
@@ -0,0 +1,29 @@
+/*
+ * pmc.h
+ * Copyright (C) 2004  David Gibson, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _PPC64_PMC_H
+#define _PPC64_PMC_H
+
+#include <asm/ptrace.h>
+
+typedef void (*perf_irq_t)(struct pt_regs *);
+
+int reserve_pmc_hardware(perf_irq_t new_perf_irq);
+void release_pmc_hardware(void);
+
+#endif /* _PPC64_PMC_H */
diff --git a/include/asm-ppc64/poll.h b/include/asm-ppc64/poll.h
new file mode 100644
index 000000000000..370fa3ba0db4
--- /dev/null
+++ b/include/asm-ppc64/poll.h
@@ -0,0 +1,32 @@
+#ifndef __PPC64_POLL_H
+#define __PPC64_POLL_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __PPC64_POLL_H */
diff --git a/include/asm-ppc64/posix_types.h b/include/asm-ppc64/posix_types.h
new file mode 100644
index 000000000000..516de7201b5d
--- /dev/null
+++ b/include/asm-ppc64/posix_types.h
@@ -0,0 +1,119 @@
+#ifndef _PPC64_POSIX_TYPES_H
+#define _PPC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned long  	__kernel_nlink_t;
+typedef unsigned int	__kernel_mode_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_uid_t;
+typedef unsigned int	__kernel_old_gid_t;
+typedef unsigned long	__kernel_old_dev_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+    || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = (unsigned long *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+
+		      case 8:
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _PPC64_POSIX_TYPES_H */
diff --git a/include/asm-ppc64/ppc32.h b/include/asm-ppc64/ppc32.h
new file mode 100644
index 000000000000..1d0404897550
--- /dev/null
+++ b/include/asm-ppc64/ppc32.h
@@ -0,0 +1,122 @@
+#ifndef _PPC64_PPC32_H
+#define _PPC64_PPC32_H
+
+#include <linux/compat.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+/*
+ * Data types and macros for providing 32b PowerPC support.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* These are here to support 32-bit syscalls on a 64-bit kernel. */
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			compat_uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;			/* timer id */
+			int _overrun;			/* overrun count */
+			compat_sigval_t _sigval;		/* same as below */
+			int _sys_private;		/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			compat_uid_t _uid;		/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;		/* which child */
+			compat_uid_t _uid;		/* sender's uid */
+			int _status;			/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
+		struct {
+			unsigned int _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+#define __old_sigaction32	old_sigaction32
+
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+
+
+struct sigaction32 {
+       unsigned int  sa_handler;	/* Really a pointer, but need to deal with 32 bits */
+       unsigned int sa_flags;
+       unsigned int sa_restorer;	/* Another 32 bit pointer */
+       compat_sigset_t sa_mask;		/* A 32 bit mask */
+};
+
+typedef struct sigaltstack_32 {
+	unsigned int ss_sp;
+	int ss_flags;
+	compat_size_t ss_size;
+} stack_32_t;
+
+struct sigcontext32 {
+	unsigned int	_unused[4];
+	int		signal;
+	unsigned int	handler;
+	unsigned int	oldmask;
+	u32 regs;  /* 4 byte pointer to the pt_regs32 structure. */
+};
+
+struct mcontext32 {
+	elf_gregset_t32		mc_gregs;
+	elf_fpregset_t		mc_fregs;
+	unsigned int		mc_pad[2];
+	elf_vrregset_t32	mc_vregs __attribute__((__aligned__(16)));
+};
+
+struct ucontext32 { 
+	unsigned int	  	uc_flags;
+	unsigned int 	  	uc_link;
+	stack_32_t	 	uc_stack;
+	int		 	uc_pad[7];
+	u32			uc_regs;	/* points to uc_mcontext field */
+	compat_sigset_t	 	uc_sigmask;	/* mask last for extensibility */
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+	int		 	uc_maskext[30];
+	int		 	uc_pad2[3];
+	struct mcontext32	uc_mcontext;
+};
+
+#endif  /* _PPC64_PPC32_H */
diff --git a/include/asm-ppc64/ppc_asm.h b/include/asm-ppc64/ppc_asm.h
new file mode 100644
index 000000000000..9031d8a29aca
--- /dev/null
+++ b/include/asm-ppc64/ppc_asm.h
@@ -0,0 +1,242 @@
+/*
+ * arch/ppc64/kernel/ppc_asm.h
+ *
+ * Definitions used by various bits of low-level assembly code on PowerPC.
+ *
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PPC_ASM_H
+#define _PPC64_PPC_ASM_H
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+/* Macros to adjust thread priority for Iseries hardware multithreading */
+#define HMT_LOW		or 1,1,1
+#define HMT_MEDIUM	or 2,2,2
+#define HMT_HIGH	or 3,3,3
+
+/* Insert the high 32 bits of the MSR into what will be the new
+   MSR (via SRR1 and rfid)  This preserves the MSR.SF and MSR.ISF
+   bits. */
+
+#define FIX_SRR1(ra, rb)	\
+	mr	rb,ra;		\
+	mfmsr	ra;		\
+	rldimi	ra,rb,0,32
+
+#define CLR_TOP32(r)	rlwinm	(r),(r),0,0,31	/* clear top 32 bits */
+
+/* 
+ * LOADADDR( rn, name )
+ *   loads the address of 'name' into 'rn'
+ *
+ * LOADBASE( rn, name )
+ *   loads the address (less the low 16 bits) of 'name' into 'rn'
+ *   suitable for base+disp addressing
+ */
+#define LOADADDR(rn,name) \
+	lis	rn,name##@highest;	\
+	ori	rn,rn,name##@higher;	\
+	rldicr	rn,rn,32,31;		\
+	oris	rn,rn,name##@h;		\
+	ori	rn,rn,name##@l
+
+#define LOADBASE(rn,name) \
+	lis	rn,name@highest;	\
+	ori	rn,rn,name@higher;	\
+	rldicr	rn,rn,32,31;		\
+	oris	rn,rn,name@ha
+
+
+#define SET_REG_TO_CONST(reg, value)	         	\
+	lis     reg,(((value)>>48)&0xFFFF);             \
+	ori     reg,reg,(((value)>>32)&0xFFFF);         \
+	rldicr  reg,reg,32,31;                          \
+	oris    reg,reg,(((value)>>16)&0xFFFF);         \
+	ori     reg,reg,((value)&0xFFFF);
+
+#define SET_REG_TO_LABEL(reg, label)	         	\
+	lis     reg,(label)@highest;                    \
+	ori     reg,reg,(label)@higher;                 \
+	rldicr  reg,reg,32,31;                          \
+	oris    reg,reg,(label)@h;                      \
+	ori     reg,reg,(label)@l;
+
+
+/* PPPBBB - DRENG  If KERNELBASE is always 0xC0...,
+ * Then we can easily do this with one asm insn. -Peter
+ */
+#define tophys(rd,rs)                           \
+        lis     rd,((KERNELBASE>>48)&0xFFFF);   \
+        rldicr  rd,rd,32,31;                    \
+        sub     rd,rs,rd
+
+#define tovirt(rd,rs)                           \
+        lis     rd,((KERNELBASE>>48)&0xFFFF);   \
+        rldicr  rd,rd,32,31;                    \
+        add     rd,rs,rd
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+#endif /* _PPC64_PPC_ASM_H */
diff --git a/include/asm-ppc64/ppcdebug.h b/include/asm-ppc64/ppcdebug.h
new file mode 100644
index 000000000000..fd7f696065c4
--- /dev/null
+++ b/include/asm-ppc64/ppcdebug.h
@@ -0,0 +1,108 @@
+#ifndef __PPCDEBUG_H
+#define __PPCDEBUG_H
+/********************************************************************
+ * Author: Adam Litke, IBM Corp
+ * (c) 2001
+ *
+ * This file contains definitions and macros for a runtime debugging
+ * system for ppc64 (This should also work on 32 bit with a few    
+ * adjustments.                                                   
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/udbg.h>
+#include <stdarg.h>
+
+#define PPCDBG_BITVAL(X)     ((1UL)<<((unsigned long)(X)))
+
+/* Defined below are the bit positions of various debug flags in the
+ * ppc64_debug_switch variable.
+ * -- When adding new values, please enter them into trace names below -- 
+ *
+ * Values 62 & 63 can be used to stress the hardware page table management
+ * code.  They must be set statically, any attempt to change them dynamically
+ * would be a very bad idea.
+ */
+#define PPCDBG_MMINIT        PPCDBG_BITVAL(0)
+#define PPCDBG_MM            PPCDBG_BITVAL(1)
+#define PPCDBG_SYS32         PPCDBG_BITVAL(2)
+#define PPCDBG_SYS32NI       PPCDBG_BITVAL(3)
+#define PPCDBG_SYS32X	     PPCDBG_BITVAL(4)
+#define PPCDBG_SYS32M	     PPCDBG_BITVAL(5)
+#define PPCDBG_SYS64         PPCDBG_BITVAL(6)
+#define PPCDBG_SYS64NI       PPCDBG_BITVAL(7)
+#define PPCDBG_SYS64X	     PPCDBG_BITVAL(8)
+#define PPCDBG_SIGNAL        PPCDBG_BITVAL(9)
+#define PPCDBG_SIGNALXMON    PPCDBG_BITVAL(10)
+#define PPCDBG_BINFMT32      PPCDBG_BITVAL(11)
+#define PPCDBG_BINFMT64      PPCDBG_BITVAL(12)
+#define PPCDBG_BINFMTXMON    PPCDBG_BITVAL(13)
+#define PPCDBG_BINFMT_32ADDR PPCDBG_BITVAL(14)
+#define PPCDBG_ALIGNFIXUP    PPCDBG_BITVAL(15)
+#define PPCDBG_TCEINIT       PPCDBG_BITVAL(16)
+#define PPCDBG_TCE           PPCDBG_BITVAL(17)
+#define PPCDBG_PHBINIT       PPCDBG_BITVAL(18)
+#define PPCDBG_SMP           PPCDBG_BITVAL(19)
+#define PPCDBG_BOOT          PPCDBG_BITVAL(20)
+#define PPCDBG_BUSWALK       PPCDBG_BITVAL(21)
+#define PPCDBG_PROM	     PPCDBG_BITVAL(22)
+#define PPCDBG_RTAS	     PPCDBG_BITVAL(23)
+#define PPCDBG_HTABSTRESS    PPCDBG_BITVAL(62)
+#define PPCDBG_HTABSIZE      PPCDBG_BITVAL(63)
+#define PPCDBG_NONE          (0UL)
+#define PPCDBG_ALL           (0xffffffffUL)
+
+/* The default initial value for the debug switch */
+#define PPC_DEBUG_DEFAULT    0 
+/* #define PPC_DEBUG_DEFAULT    PPCDBG_ALL        */
+
+#define PPCDBG_NUM_FLAGS     64
+
+extern u64 ppc64_debug_switch;
+
+#ifdef WANT_PPCDBG_TAB
+/* A table of debug switch names to allow name lookup in xmon 
+ * (and whoever else wants it.
+ */
+char *trace_names[PPCDBG_NUM_FLAGS] = {
+	/* Known debug names */
+	"mminit", 	"mm",
+	"syscall32", 	"syscall32_ni", "syscall32x",	"syscall32m",
+	"syscall64", 	"syscall64_ni", "syscall64x",
+	"signal",	"signal_xmon",
+	"binfmt32",	"binfmt64",	"binfmt_xmon",	"binfmt_32addr",
+	"alignfixup",   "tceinit",      "tce",          "phb_init",     
+	"smp",          "boot",         "buswalk",	"prom",
+	"rtas"
+};
+#else
+extern char *trace_names[64];
+#endif /* WANT_PPCDBG_TAB */
+
+#ifdef CONFIG_PPCDBG
+/* Macro to conditionally print debug based on debug_switch */
+#define PPCDBG(...) udbg_ppcdbg(__VA_ARGS__)
+
+/* Macro to conditionally call a debug routine based on debug_switch */
+#define PPCDBGCALL(FLAGS,FUNCTION) ifppcdebug(FLAGS) FUNCTION
+
+/* Macros to test for debug states */
+#define ifppcdebug(FLAGS) if (udbg_ifdebug(FLAGS))
+#define ppcdebugset(FLAGS) (udbg_ifdebug(FLAGS))
+#define PPCDBG_BINFMT (test_thread_flag(TIF_32BIT) ? PPCDBG_BINFMT32 : PPCDBG_BINFMT64)
+
+#else
+#define PPCDBG(...) do {;} while (0)
+#define PPCDBGCALL(FLAGS,FUNCTION) do {;} while (0)
+#define ifppcdebug(...) if (0)
+#define ppcdebugset(FLAGS) (0)
+#endif /* CONFIG_PPCDBG */
+
+#endif /*__PPCDEBUG_H */
diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h
new file mode 100644
index 000000000000..eb33d33cfd6d
--- /dev/null
+++ b/include/asm-ppc64/processor.h
@@ -0,0 +1,667 @@
+#ifndef __ASM_PPC64_PROCESSOR_H
+#define __ASM_PPC64_PROCESSOR_H
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/stringify.h>
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <asm/atomic.h>
+#include <asm/ppcdebug.h>
+#include <asm/a.out.h>
+#endif
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/systemcfg.h>
+
+/* Machine State Register (MSR) Fields */
+#define MSR_SF_LG	63              /* Enable 64 bit mode */
+#define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
+#define MSR_HV_LG 	60              /* Hypervisor state */
+#define MSR_VEC_LG	25	        /* Enable AltiVec */
+#define MSR_POW_LG	18		/* Enable Power Management */
+#define MSR_WE_LG	18		/* Wait State Enable */
+#define MSR_TGPR_LG	17		/* TLB Update registers in use */
+#define MSR_CE_LG	17		/* Critical Interrupt Enable */
+#define MSR_ILE_LG	16		/* Interrupt Little Endian */
+#define MSR_EE_LG	15		/* External Interrupt Enable */
+#define MSR_PR_LG	14		/* Problem State / Privilege Level */
+#define MSR_FP_LG	13		/* Floating Point enable */
+#define MSR_ME_LG	12		/* Machine Check Enable */
+#define MSR_FE0_LG	11		/* Floating Exception mode 0 */
+#define MSR_SE_LG	10		/* Single Step */
+#define MSR_BE_LG	9		/* Branch Trace */
+#define MSR_DE_LG	9 		/* Debug Exception Enable */
+#define MSR_FE1_LG	8		/* Floating Exception mode 1 */
+#define MSR_IP_LG	6		/* Exception prefix 0x000/0xFFF */
+#define MSR_IR_LG	5 		/* Instruction Relocate */
+#define MSR_DR_LG	4 		/* Data Relocate */
+#define MSR_PE_LG	3		/* Protection Enable */
+#define MSR_PX_LG	2		/* Protection Exclusive Mode */
+#define MSR_PMM_LG	2		/* Performance monitor */
+#define MSR_RI_LG	1		/* Recoverable Exception */
+#define MSR_LE_LG	0 		/* Little Endian */
+
+#ifdef __ASSEMBLY__
+#define __MASK(X)	(1<<(X))
+#else
+#define __MASK(X)	(1UL<<(X))
+#endif
+
+#define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
+#define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
+#define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
+#define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
+#define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
+#define MSR_WE		__MASK(MSR_WE_LG)	/* Wait State Enable */
+#define MSR_TGPR	__MASK(MSR_TGPR_LG)	/* TLB Update registers in use */
+#define MSR_CE		__MASK(MSR_CE_LG)	/* Critical Interrupt Enable */
+#define MSR_ILE		__MASK(MSR_ILE_LG)	/* Interrupt Little Endian */
+#define MSR_EE		__MASK(MSR_EE_LG)	/* External Interrupt Enable */
+#define MSR_PR		__MASK(MSR_PR_LG)	/* Problem State / Privilege Level */
+#define MSR_FP		__MASK(MSR_FP_LG)	/* Floating Point enable */
+#define MSR_ME		__MASK(MSR_ME_LG)	/* Machine Check Enable */
+#define MSR_FE0		__MASK(MSR_FE0_LG)	/* Floating Exception mode 0 */
+#define MSR_SE		__MASK(MSR_SE_LG)	/* Single Step */
+#define MSR_BE		__MASK(MSR_BE_LG)	/* Branch Trace */
+#define MSR_DE		__MASK(MSR_DE_LG)	/* Debug Exception Enable */
+#define MSR_FE1		__MASK(MSR_FE1_LG)	/* Floating Exception mode 1 */
+#define MSR_IP		__MASK(MSR_IP_LG)	/* Exception prefix 0x000/0xFFF */
+#define MSR_IR		__MASK(MSR_IR_LG)	/* Instruction Relocate */
+#define MSR_DR		__MASK(MSR_DR_LG)	/* Data Relocate */
+#define MSR_PE		__MASK(MSR_PE_LG)	/* Protection Enable */
+#define MSR_PX		__MASK(MSR_PX_LG)	/* Protection Exclusive Mode */
+#define MSR_PMM		__MASK(MSR_PMM_LG)	/* Performance monitor */
+#define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
+#define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
+
+#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF
+#define MSR_KERNEL      MSR_ | MSR_SF | MSR_HV
+
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_SF
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+
+#define FPSCR_FX	0x80000000	/* FPU exception summary */
+#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
+#define FPSCR_VX	0x20000000	/* Invalid operation summary */
+#define FPSCR_OX	0x10000000	/* Overflow exception summary */
+#define FPSCR_UX	0x08000000	/* Underflow exception summary */
+#define FPSCR_ZX	0x04000000	/* Zero-divide exception summary */
+#define FPSCR_XX	0x02000000	/* Inexact exception summary */
+#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
+#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
+#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
+#define FPSCR_FR	0x00040000	/* Fraction rounded */
+#define FPSCR_FI	0x00020000	/* Fraction inexact */
+#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
+#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
+#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
+#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
+#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
+#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
+#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
+#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
+#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
+#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
+#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
+#define FPSCR_RN	0x00000003	/* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+
+#define	SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
+#define	SPRN_CTR	0x009	/* Count Register */
+#define	SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
+#define	SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
+#define	SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define	SPRN_DAR	0x013	/* Data Address Register */
+#define	SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define	  DBCR_EDM	0x80000000
+#define	  DBCR_IDM	0x40000000
+#define	  DBCR_RST(x)	(((x) & 0x3) << 28)
+#define	    DBCR_RST_NONE       	0
+#define	    DBCR_RST_CORE       	1
+#define	    DBCR_RST_CHIP       	2
+#define	    DBCR_RST_SYSTEM		3
+#define	  DBCR_IC	0x08000000	/* Instruction Completion Debug Evnt */
+#define	  DBCR_BT	0x04000000	/* Branch Taken Debug Event */
+#define	  DBCR_EDE	0x02000000	/* Exception Debug Event */
+#define	  DBCR_TDE	0x01000000	/* TRAP Debug Event */
+#define	  DBCR_FER	0x00F80000	/* First Events Remaining Mask */
+#define	  DBCR_FT	0x00040000	/* Freeze Timers on Debug Event */
+#define	  DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
+#define	  DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
+#define	  DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
+#define	  DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
+#define	  DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
+#define	    DAC_BYTE	0
+#define	    DAC_HALF	1
+#define	    DAC_WORD	2
+#define	    DAC_QUAD	3
+#define	  DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
+#define	  DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
+#define	  DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
+#define	  DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
+#define	  DBCR_SED	0x00000020	/* Second Exception Debug Event */
+#define	  DBCR_STD	0x00000010	/* Second Trap Debug Event */
+#define	  DBCR_SIA	0x00000008	/* Second IAC Enable */
+#define	  DBCR_SDA	0x00000004	/* Second DAC Enable */
+#define	  DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
+#define	  DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
+#define	SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
+#define	SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */
+#define	SPRN_DBSR	0x3F0	/* Debug Status Register */
+#define	SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
+#define	  DCCR_NOCACHE		0	/* Noncacheable */
+#define	  DCCR_CACHE		1	/* Cacheable */
+#define	SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
+#define	SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
+#define	  DCWR_COPY		0	/* Copy-back */
+#define	  DCWR_WRITE		1	/* Write-through */
+#define	SPRN_DEAR	0x3D5	/* Data Error Address Register */
+#define	SPRN_DEC	0x016	/* Decrement Register */
+#define	SPRN_DMISS	0x3D0	/* Data TLB Miss Register */
+#define	SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define   DSISR_NOHPTE		0x40000000	/* no translation found */
+#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
+#define   DSISR_ISSTORE		0x02000000	/* access was a store */
+#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
+#define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
+#define	SPRN_EAR	0x11A	/* External Address Register */
+#define	SPRN_ESR	0x3D4	/* Exception Syndrome Register */
+#define	  ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
+#define	  ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
+#define	  ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
+#define	  ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define	  ESR_PIL	0x08000000	/* Program Exception - Illegal */
+#define	  ESR_PPR	0x04000000	/* Program Exception - Priveleged */
+#define	  ESR_PTR	0x02000000	/* Program Exception - Trap */
+#define	  ESR_DST	0x00800000	/* Storage Exception - Data miss */
+#define	  ESR_DIZ	0x00400000	/* Storage Exception - Zone fault */
+#define	SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
+#define	SPRN_HASH1	0x3D2	/* Primary Hash Address Register */
+#define	SPRN_HASH2	0x3D3	/* Secondary Hash Address Resgister */
+#define	SPRN_HID0	0x3F0	/* Hardware Implementation Register 0 */
+#define	  HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
+#define	  HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
+#define	  HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
+#define	  HID0_SBCLK	(1<<27)
+#define	  HID0_EICE	(1<<26)
+#define	  HID0_ECLK	(1<<25)
+#define	  HID0_PAR	(1<<24)
+#define	  HID0_DOZE	(1<<23)
+#define	  HID0_NAP	(1<<22)
+#define	  HID0_SLEEP	(1<<21)
+#define	  HID0_DPM	(1<<20)
+#define	  HID0_ICE	(1<<15)		/* Instruction Cache Enable */
+#define	  HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define	  HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
+#define	  HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define	  HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
+#define	  HID0_DCI	(1<<10)		/* Data Cache Invalidate */
+#define   HID0_SPD	(1<<9)		/* Speculative disable */
+#define   HID0_SGE	(1<<7)		/* Store Gathering Enable */
+#define	  HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
+#define   HID0_BTIC	(1<<5)		/* Branch Target Instruction Cache Enable */
+#define   HID0_ABE	(1<<3)		/* Address Broadcast Enable */
+#define	  HID0_BHTE	(1<<2)		/* Branch History Table Enable */
+#define	  HID0_BTCD	(1<<1)		/* Branch target cache disable */
+#define	SPRN_MSRDORM	0x3F1	/* Hardware Implementation Register 1 */
+#define SPRN_HID1	0x3F1	/* Hardware Implementation Register 1 */
+#define	SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define	SPRN_NIADORM	0x3F3	/* Hardware Implementation Register 2 */
+#define SPRN_HID4	0x3F4	/* 970 HID4 */
+#define SPRN_HID5	0x3F6	/* 970 HID5 */
+#define	SPRN_TSC 	0x3FD	/* Thread switch control */
+#define	SPRN_TST 	0x3FC	/* Thread switch timeout */
+#define	SPRN_IAC1	0x3F4	/* Instruction Address Compare 1 */
+#define	SPRN_IAC2	0x3F5	/* Instruction Address Compare 2 */
+#define	SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define	  ICCR_NOCACHE		0	/* Noncacheable */
+#define	  ICCR_CACHE		1	/* Cacheable */
+#define	SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#define	SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
+#define	SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#define	SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
+#define	SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
+#define	SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
+#define	SPRN_LR		0x008	/* Link Register */
+#define	SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
+#define	SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
+#define	SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
+#define	SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
+#define	SPRN_PID	0x3B1	/* Process ID */
+#define	SPRN_PIR	0x3FF	/* Processor Identification Register */
+#define	SPRN_PIT	0x3DB	/* Programmable Interval Timer */
+#define	SPRN_PURR	0x135	/* Processor Utilization of Resources Register */
+#define	SPRN_PVR	0x11F	/* Processor Version Register */
+#define	SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#define	SPRN_SDA	0x3BF	/* Sampled Data Address Register */
+#define	SPRN_SDR1	0x019	/* MMU Hash Base Register */
+#define	SPRN_SGR	0x3B9	/* Storage Guarded Register */
+#define	  SGR_NORMAL		0
+#define	  SGR_GUARDED		1
+#define	SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
+#define	SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
+#define	SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
+#define	SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
+#define	SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define	SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
+#define	SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
+#define	SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
+#define	SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
+#define	SPRN_TBWL	0x11C	/* Time Base Lower Register (super, W/O) */
+#define	SPRN_TBWU	0x11D	/* Time Base Write Upper Register (super, W/O) */
+#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define	SPRN_TCR	0x3DA	/* Timer Control Register */
+#define	  TCR_WP(x)		(((x)&0x3)<<30)	/* WDT Period */
+#define	    WP_2_17		0		/* 2^17 clocks */
+#define	    WP_2_21		1		/* 2^21 clocks */
+#define	    WP_2_25		2		/* 2^25 clocks */
+#define	    WP_2_29		3		/* 2^29 clocks */
+#define	  TCR_WRC(x)		(((x)&0x3)<<28)	/* WDT Reset Control */
+#define	    WRC_NONE		0		/* No reset will occur */
+#define	    WRC_CORE		1		/* Core reset will occur */
+#define	    WRC_CHIP		2		/* Chip reset will occur */
+#define	    WRC_SYSTEM		3		/* System reset will occur */
+#define	  TCR_WIE		0x08000000	/* WDT Interrupt Enable */
+#define	  TCR_PIE		0x04000000	/* PIT Interrupt Enable */
+#define	  TCR_FP(x)		(((x)&0x3)<<24)	/* FIT Period */
+#define	    FP_2_9		0		/* 2^9 clocks */
+#define	    FP_2_13		1		/* 2^13 clocks */
+#define	    FP_2_17		2		/* 2^17 clocks */
+#define	    FP_2_21		3		/* 2^21 clocks */
+#define	  TCR_FIE		0x00800000	/* FIT Interrupt Enable */
+#define	  TCR_ARE		0x00400000	/* Auto Reload Enable */
+#define	SPRN_THRM1	0x3FC	/* Thermal Management Register 1 */
+#define	  THRM1_TIN		(1<<0)
+#define	  THRM1_TIV		(1<<1)
+#define	  THRM1_THRES		(0x7f<<2)
+#define	  THRM1_TID		(1<<29)
+#define	  THRM1_TIE		(1<<30)
+#define	  THRM1_V		(1<<31)
+#define	SPRN_THRM2	0x3FD	/* Thermal Management Register 2 */
+#define	SPRN_THRM3	0x3FE	/* Thermal Management Register 3 */
+#define	  THRM3_E		(1<<31)
+#define	SPRN_TSR	0x3D8	/* Timer Status Register */
+#define	  TSR_ENW		0x80000000	/* Enable Next Watchdog */
+#define	  TSR_WIS		0x40000000	/* WDT Interrupt Status */
+#define	  TSR_WRS(x)		(((x)&0x3)<<28)	/* WDT Reset Status */
+#define	    WRS_NONE		0		/* No WDT reset occurred */
+#define	    WRS_CORE		1		/* WDT forced core reset */
+#define	    WRS_CHIP		2		/* WDT forced chip reset */
+#define	    WRS_SYSTEM		3		/* WDT forced system reset */
+#define	  TSR_PIS		0x08000000	/* PIT Interrupt Status */
+#define	  TSR_FIS		0x04000000	/* FIT Interrupt Status */
+#define	SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
+#define	SPRN_XER	0x001	/* Fixed Point Exception Register */
+#define	SPRN_ZPR	0x3B0	/* Zone Protection Register */
+#define SPRN_VRSAVE     0x100   /* Vector save */
+
+/* Performance monitor SPRs */
+#define SPRN_SIAR	780
+#define SPRN_SDAR	781
+#define SPRN_MMCRA	786
+#define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
+#define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
+#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define SPRN_PMC1	787
+#define SPRN_PMC2	788
+#define SPRN_PMC3	789
+#define SPRN_PMC4	790
+#define SPRN_PMC5	791
+#define SPRN_PMC6	792
+#define SPRN_PMC7	793
+#define SPRN_PMC8	794
+#define SPRN_MMCR0	795
+#define   MMCR0_FC	0x80000000UL /* freeze counters. set to 1 on a perfmon exception */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze counters on enabled condition or event */
+/* time base exception enable */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
+#define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
+#define   MMCR0_FCTA	0x00000004UL /* freeze counters in tags active mode */
+#define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
+#define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
+#define SPRN_MMCR1	798
+
+/* Short-hand versions for a number of the above SPRNs */
+
+#define	CTR	SPRN_CTR	/* Counter Register */
+#define	DAR	SPRN_DAR	/* Data Address Register */
+#define	DABR	SPRN_DABR	/* Data Address Breakpoint Register */
+#define	DCMP	SPRN_DCMP      	/* Data TLB Compare Register */
+#define	DEC	SPRN_DEC       	/* Decrement Register */
+#define	DMISS	SPRN_DMISS     	/* Data TLB Miss Register */
+#define	DSISR	SPRN_DSISR	/* Data Storage Interrupt Status Register */
+#define	EAR	SPRN_EAR       	/* External Address Register */
+#define	HASH1	SPRN_HASH1	/* Primary Hash Address Register */
+#define	HASH2	SPRN_HASH2	/* Secondary Hash Address Register */
+#define	HID0	SPRN_HID0	/* Hardware Implementation Register 0 */
+#define	MSRDORM	SPRN_MSRDORM	/* MSR Dormant Register */
+#define	NIADORM	SPRN_NIADORM	/* NIA Dormant Register */
+#define	TSC    	SPRN_TSC 	/* Thread switch control */
+#define	TST    	SPRN_TST 	/* Thread switch timeout */
+#define	IABR	SPRN_IABR      	/* Instruction Address Breakpoint Register */
+#define	ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
+#define	IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
+#define	IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
+#define	L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
+#define	__LR	SPRN_LR
+#define	PVR	SPRN_PVR	/* Processor Version */
+#define	PIR	SPRN_PIR	/* Processor ID */
+#define	PURR	SPRN_PURR	/* Processor Utilization of Resource Register */
+//#define	RPA	SPRN_RPA	/* Required Physical Address Register */
+#define	SDR1	SPRN_SDR1      	/* MMU hash base register */
+#define	SPR0	SPRN_SPRG0	/* Supervisor Private Registers */
+#define	SPR1	SPRN_SPRG1
+#define	SPR2	SPRN_SPRG2
+#define	SPR3	SPRN_SPRG3
+#define	SPRG0   SPRN_SPRG0
+#define	SPRG1   SPRN_SPRG1
+#define	SPRG2   SPRN_SPRG2
+#define	SPRG3   SPRN_SPRG3
+#define	SRR0	SPRN_SRR0	/* Save and Restore Register 0 */
+#define	SRR1	SPRN_SRR1	/* Save and Restore Register 1 */
+#define	TBRL	SPRN_TBRL	/* Time Base Read Lower Register */
+#define	TBRU	SPRN_TBRU	/* Time Base Read Upper Register */
+#define	TBWL	SPRN_TBWL	/* Time Base Write Lower Register */
+#define	TBWU	SPRN_TBWU	/* Time Base Write Upper Register */
+#define ICTC	1019
+#define	THRM1	SPRN_THRM1	/* Thermal Management Register 1 */
+#define	THRM2	SPRN_THRM2	/* Thermal Management Register 2 */
+#define	THRM3	SPRN_THRM3	/* Thermal Management Register 3 */
+#define	XER	SPRN_XER
+
+/* Processor Version Register (PVR) field extraction */
+
+#define	PVR_VER(pvr)  (((pvr) >>  16) & 0xFFFF)	/* Version field */
+#define	PVR_REV(pvr)  (((pvr) >>   0) & 0xFFFF)	/* Revison field */
+
+/* Processor Version Numbers */
+#define	PV_NORTHSTAR	0x0033
+#define	PV_PULSAR	0x0034
+#define	PV_POWER4	0x0035
+#define	PV_ICESTAR	0x0036
+#define	PV_SSTAR	0x0037
+#define	PV_POWER4p	0x0038
+#define PV_970		0x0039
+#define	PV_POWER5	0x003A
+#define PV_POWER5p	0x003B
+#define PV_970FX	0x003C
+#define	PV_630        	0x0040
+#define	PV_630p	        0x0041
+
+/* Platforms supported by PPC64 */
+#define PLATFORM_PSERIES      0x0100
+#define PLATFORM_PSERIES_LPAR 0x0101
+#define PLATFORM_ISERIES_LPAR 0x0201
+#define PLATFORM_LPAR         0x0001
+#define PLATFORM_POWERMAC     0x0400
+#define PLATFORM_MAPLE        0x0500
+
+/* Compatibility with drivers coming from PPC32 world */
+#define _machine	(systemcfg->platform)
+#define _MACH_Pmac	PLATFORM_POWERMAC
+
+/*
+ * List of interrupt controllers.
+ */
+#define IC_INVALID    0
+#define IC_OPEN_PIC   1
+#define IC_PPC_XIC    2
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+/* iSeries CTRL register (for runlatch) */
+
+#define CTRLT		0x098
+#define CTRLF		0x088
+#define RUNLATCH	0x0001
+
+#ifdef __ASSEMBLY__
+
+#define _GLOBAL(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _STATIC(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#else /* __ASSEMBLY__ */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/* Macros for setting and retrieving special purpose registers */
+
+#define mfmsr()		({unsigned long rval; \
+			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+
+#define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
+				     : : "r" (v))
+#define mtmsrd(v)	__mtmsrd((v), 0)
+
+#define mfspr(rn)	({unsigned long rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				     : "=r" (rval)); rval;})
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#define mftb()		({unsigned long rval;	\
+			asm volatile("mftb %0" : "=r" (rval)); rval;})
+
+#define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
+#define mttbu(v)	asm volatile("mttbu %0":: "r"(v))
+
+#define mfasr()		({unsigned long rval; \
+			asm volatile("mfasr %0" : "=r" (rval)); rval;})
+
+static inline void set_tb(unsigned int upper, unsigned int lower)
+{
+	mttbl(0);
+	mttbu(upper);
+	mttbl(lower);
+}
+
+#define __get_SP()	({unsigned long sp; \
+			asm volatile("mr %0,1": "=r" (sp)); sp;})
+
+#ifdef __KERNEL__
+
+extern int have_of;
+extern u64 ppc64_interrupt_controller;
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Create a new kernel thread. */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+
+/* 64-bit user address space is 41-bits (2TBs user VM) */
+#define TASK_SIZE_USER64 (0x0000020000000000UL)
+
+/* 
+ * 32-bit user address space is 4GB - 1 page 
+ * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
+ */
+#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
+
+#define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \
+		TASK_SIZE_USER32 : TASK_SIZE_USER64)
+
+/* We can't actually tell the TASK_SIZE given just the mm, but default
+ * to the 64-bit case to make sure that enough gets cleaned up. */
+#define MM_VM_SIZE(mm)	TASK_SIZE_USER64
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
+
+#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)||(ppcdebugset(PPCDBG_BINFMT_32ADDR))) ? \
+		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+	unsigned long	ksp_vsid;
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+	double		fpr[32];	/* Complete floating point set */
+	unsigned long	fpscr;		/* Floating point status (plus pad) */
+	unsigned long	fpexc_mode;	/* Floating-point exception mode */
+	unsigned long	start_tb;	/* Start purr when proc switched in */
+	unsigned long	accum_tb;	/* Total accumilated purr for process */
+	unsigned long	vdso_base;	/* base of the vDSO library */
+#ifdef CONFIG_ALTIVEC
+	/* Complete AltiVec register set */
+	vector128	vr[32] __attribute((aligned(16)));
+	/* AltiVec status */
+	vector128	vscr __attribute((aligned(16)));
+	unsigned long	vrsave;
+	int		used_vr;	/* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD  { \
+	.ksp = INIT_SP, \
+	.regs = (struct pt_regs *)INIT_SP - 1, \
+	.fs = KERNEL_DS, \
+	.fpr = {0}, \
+	.fpscr = 0, \
+	.fpexc_mode = MSR_FE0|MSR_FE1, \
+}
+
+/*
+ * Note: the vm_start and vm_end fields here should *not*
+ * be in kernel space.  (Could vm_end == vm_start perhaps?)
+ */
+#define IOREMAP_MMAP { &ioremap_mm, 0, 0x1000, NULL, \
+		    PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \
+		    1, NULL, NULL }
+
+extern struct mm_struct ioremap_mm;
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk)    \
+        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned long msr_bits)
+{
+	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned long __pack_fe01(unsigned int fpmode)
+{
+	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+#define cpu_relax()	do { HMT_low(); HMT_medium(); barrier(); } while (0)
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	__asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	__asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Number of entries in the SLB. If this ever changes we should handle
+ * it with a use a cpu feature fixup.
+ */
+#define SLB_NUM_ENTRIES 64
+
+#endif /* __ASM_PPC64_PROCESSOR_H */
diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h
new file mode 100644
index 000000000000..2440a2c90ae9
--- /dev/null
+++ b/include/asm-ppc64/prom.h
@@ -0,0 +1,230 @@
+#ifndef _PPC64_PROM_H
+#define _PPC64_PROM_H
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+#define PTRRELOC(x)     ((typeof(x))((unsigned long)(x) - offset))
+#define PTRUNRELOC(x)   ((typeof(x))((unsigned long)(x) + offset))
+#define RELOC(x)        (*PTRRELOC(&(x)))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* 4: version, 4: total size */
+#define OF_DT_BEGIN_NODE	0x1		/* Start node: full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size, content */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		1
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header
+{
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Which physical CPU id we're booting on */
+};
+
+
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct address_range {
+	unsigned long space;
+	unsigned long address;
+	unsigned long size;
+};
+
+struct interrupt_info {
+	int	line;
+	int	sense;		/* +ve/-ve logic, edge or level, etc. */
+};
+
+struct pci_address {
+	u32 a_hi;
+	u32 a_mid;
+	u32 a_lo;
+};
+
+struct isa_address {
+	u32 a_hi;
+	u32 a_lo;
+};
+
+struct isa_range {
+	struct isa_address isa_addr;
+	struct pci_address pci_addr;
+	unsigned int size;
+};
+
+struct reg_property {
+	unsigned long address;
+	unsigned long size;
+};
+
+struct reg_property32 {
+	unsigned int address;
+	unsigned int size;
+};
+
+struct reg_property64 {
+	unsigned long address;
+	unsigned long size;
+};
+
+struct property {
+	char	*name;
+	int	length;
+	unsigned char *value;
+	struct property *next;
+};
+
+/* NOTE: the device_node contains PCI specific info for pci devices.
+ * This perhaps could be hung off the device_node with another struct,
+ * but for now it is directly in the node.  The phb ptr is a good
+ * indication of a real PCI node.  Other nodes leave these fields zeroed.
+ */
+struct pci_controller;
+struct iommu_table;
+
+struct device_node {
+	char	*name;
+	char	*type;
+	phandle	node;
+	phandle linux_phandle;
+	int	n_addrs;
+	struct	address_range *addrs;
+	int	n_intrs;
+	struct	interrupt_info *intrs;
+	char	*full_name;
+
+	/* PCI stuff probably doesn't belong here */
+	int	busno;			/* for pci devices */
+	int	bussubno;		/* for pci devices */
+	int	devfn;			/* for pci devices */
+	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
+	int	eeh_config_addr;
+	int	pci_ext_config_space;	/* for pci devices */
+	struct  pci_controller *phb;	/* for pci devices */
+	struct	iommu_table *iommu_table;	/* for phb's or bridges */
+
+	struct	property *properties;
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;       /* this node's proc directory */
+	struct  proc_dir_entry *name_link; /* name symlink */
+	struct  proc_dir_entry *addr_link; /* addr symlink */
+	struct  kref kref;
+	unsigned long _flags;
+};
+
+extern struct device_node *of_chosen;
+
+/* flag descriptions */
+#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+/*
+ * Until 32-bit ppc can add proc_dir_entries to its device_node
+ * definition, we cannot refer to pde, name_link, and addr_link
+ * in arch-independent code.
+ */
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->name_link = de;
+}
+
+static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->addr_link = de;
+}
+
+/* OBSOLETE: Old stlye node lookup */
+extern struct device_node *find_devices(const char *name);
+extern struct device_node *find_type_devices(const char *type);
+extern struct device_node *find_path_device(const char *path);
+extern struct device_node *find_compatible_devices(const char *type,
+						   const char *compat);
+extern struct device_node *find_all_nodes(void);
+
+/* New style node lookup */
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name);
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type);
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_node_by_phandle(phandle handle);
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+					     struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(const struct device_node *);
+
+/* Other Prototypes */
+extern unsigned long prom_init(unsigned long, unsigned long, unsigned long,
+	unsigned long, unsigned long);
+extern void finish_device_tree(void);
+extern int device_is_compatible(struct device_node *device, const char *);
+extern int machine_is_compatible(const char *compat);
+extern unsigned char *get_property(struct device_node *node, const char *name,
+				   int *lenp);
+extern void print_properties(struct device_node *node);
+extern int prom_n_addr_cells(struct device_node* np);
+extern int prom_n_size_cells(struct device_node* np);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern void prom_add_property(struct device_node* np, struct property* prop);
+
+#endif /* _PPC64_PROM_H */
diff --git a/include/asm-ppc64/ptrace-common.h b/include/asm-ppc64/ptrace-common.h
new file mode 100644
index 000000000000..af03547f9c7e
--- /dev/null
+++ b/include/asm-ppc64/ptrace-common.h
@@ -0,0 +1,72 @@
+/*
+ *  linux/arch/ppc64/kernel/ptrace-common.h
+ *
+ *    Copyright (c) 2002 Stephen Rothwell, IBM Coproration
+ *    Extracted from ptrace.c and ptrace32.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file README.legal in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _PPC64_PTRACE_COMMON_H
+#define _PPC64_PTRACE_COMMON_H
+/*
+ * Set of msr bits that gdb can change on behalf of a process.
+ */
+#define MSR_DEBUGCHANGE	(MSR_FE0 | MSR_SE | MSR_BE | MSR_FE1)
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline unsigned long get_reg(struct task_struct *task, int regno)
+{
+	unsigned long tmp = 0;
+
+	/*
+	 * Put the correct FP bits in, they might be wrong as a result
+	 * of our lazy FP restore.
+	 */
+	if (regno == PT_MSR) {
+		tmp = ((unsigned long *)task->thread.regs)[PT_MSR];
+		tmp |= task->thread.fpexc_mode;
+	} else if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) {
+		tmp = ((unsigned long *)task->thread.regs)[regno];
+	}
+
+	return tmp;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int put_reg(struct task_struct *task, int regno,
+			  unsigned long data)
+{
+	if (regno < PT_SOFTE) {
+		if (regno == PT_MSR)
+			data = (data & MSR_DEBUGCHANGE)
+				| (task->thread.regs->msr & ~MSR_DEBUGCHANGE);
+		((unsigned long *)task->thread.regs)[regno] = data;
+		return 0;
+	}
+	return -EIO;
+}
+
+static inline void set_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+	if (regs != NULL)
+		regs->msr |= MSR_SE;
+	set_ti_thread_flag(task->thread_info, TIF_SINGLESTEP);
+}
+
+static inline void clear_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+	if (regs != NULL)
+		regs->msr &= ~MSR_SE;
+	clear_ti_thread_flag(task->thread_info, TIF_SINGLESTEP);
+}
+
+#endif /* _PPC64_PTRACE_COMMON_H */
diff --git a/include/asm-ppc64/ptrace.h b/include/asm-ppc64/ptrace.h
new file mode 100644
index 000000000000..c96aad28fc08
--- /dev/null
+++ b/include/asm-ppc64/ptrace.h
@@ -0,0 +1,189 @@
+#ifndef _PPC64_PTRACE_H
+#define _PPC64_PTRACE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/ppc64/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+#define PPC_REG unsigned long
+struct pt_regs {
+	PPC_REG gpr[32];
+	PPC_REG nip;
+	PPC_REG msr;
+	PPC_REG orig_gpr3;	/* Used for restarting system calls */
+	PPC_REG ctr;
+	PPC_REG link;
+	PPC_REG xer;
+	PPC_REG ccr;
+	PPC_REG softe;		/* Soft enabled/disabled */
+	PPC_REG trap;		/* Reason for being here */
+	PPC_REG dar;		/* Fault registers */
+	PPC_REG dsisr;
+	PPC_REG result; 	/* Result of a system call */
+};
+
+#define PPC_REG_32 unsigned int
+struct pt_regs32 {
+	PPC_REG_32 gpr[32];
+	PPC_REG_32 nip;
+	PPC_REG_32 msr;
+	PPC_REG_32 orig_gpr3;	/* Used for restarting system calls */
+	PPC_REG_32 ctr;
+	PPC_REG_32 link;
+	PPC_REG_32 xer;
+	PPC_REG_32 ccr;
+	PPC_REG_32 mq;		/* 601 only (not used at present) */
+				/* Used on APUS to hold IPL value. */
+	PPC_REG_32 trap;		/* Reason for being here */
+	PPC_REG_32 dar;		/* Fault registers */
+	PPC_REG_32 dsisr;
+	PPC_REG_32 result; 	/* Result of a system call */
+};
+
+#define instruction_pointer(regs) ((regs)->nip)
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
+
+/* Size of dummy stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	128
+#define __SIGNAL_FRAMESIZE32	64
+
+#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
+
+#define force_successful_syscall_return()   \
+		(current_thread_info()->syscall_noerror = 1)
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#define TRAP(regs)		((regs)->trap & ~0xF)
+#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#ifdef __KERNEL__
+#define PT_ORIG_R3 34
+#endif
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#define PT_SOFTE 39
+#define PT_RESULT 43
+
+#define PT_FPR0	48
+
+/* Kernel and userspace will both use this PT_FPSCR value.  32-bit apps will have
+ * visibility to the asm-ppc/ptrace.h header instead of this one.
+ */
+#define PT_FPSCR (PT_FPR0 + 32)	  /* each FP reg occupies 1 slot in 64-bit space */
+
+#ifdef __KERNEL__
+#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	  /* each FP reg occupies 2 32-bit userspace slots */
+#endif
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+#ifdef __KERNEL__
+#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
+#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
+#define PT_VRSAVE_32 (PT_VR0 + 33*4)
+#endif
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. 
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the 
+ * corresponding vector registers.  Quadword 32 contains the vscr as the 
+ * last word (offset 12) within that quadword.  Quadword 33 contains the 
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Additional PTRACE requests implemented on PowerPC. */
+#define PPC_PTRACE_GETREGS	      0x99  /* Get GPRs 0 - 31 */
+#define PPC_PTRACE_SETREGS	      0x98  /* Set GPRs 0 - 31 */
+#define PPC_PTRACE_GETFPREGS	    0x97  /* Get FPRs 0 - 31 */
+#define PPC_PTRACE_SETFPREGS	    0x96  /* Set FPRs 0 - 31 */
+#define PPC_PTRACE_PEEKTEXT_3264  0x95  /* Read word at location ADDR on a 64-bit process from a 32-bit process. */
+#define PPC_PTRACE_PEEKDATA_3264  0x94  /* Read word at location ADDR on a 64-bit process from a 32-bit process. */
+#define PPC_PTRACE_POKETEXT_3264  0x93  /* Write word at location ADDR on a 64-bit process from a 32-bit process. */
+#define PPC_PTRACE_POKEDATA_3264  0x92  /* Write word at location ADDR on a 64-bit process from a 32-bit process. */
+#define PPC_PTRACE_PEEKUSR_3264   0x91  /* Read a register (specified by ADDR) out of the "user area" on a 64-bit process from a 32-bit process. */
+#define PPC_PTRACE_POKEUSR_3264   0x90  /* Write DATA into location ADDR within the "user area" on a 64-bit process from a 32-bit process. */
+
+
+#endif /* _PPC64_PTRACE_H */
diff --git a/include/asm-ppc64/resource.h b/include/asm-ppc64/resource.h
new file mode 100644
index 000000000000..add031b9dfd4
--- /dev/null
+++ b/include/asm-ppc64/resource.h
@@ -0,0 +1,6 @@
+#ifndef _PPC64_RESOURCE_H
+#define _PPC64_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _PPC64_RESOURCE_H */
diff --git a/include/asm-ppc64/rtas.h b/include/asm-ppc64/rtas.h
new file mode 100644
index 000000000000..a8ab0e9db84a
--- /dev/null
+++ b/include/asm-ppc64/rtas.h
@@ -0,0 +1,243 @@
+#ifndef _PPC64_RTAS_H
+#define _PPC64_RTAS_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+
+/*
+ * Definitions for talking to the RTAS on CHRP machines.
+ *
+ * Copyright (C) 2001 Peter Bergner
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define RTAS_UNKNOWN_SERVICE (-1)
+#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+
+/* Buffer size for ppc_rtas system call. */
+#define RTAS_RMOBUF_MAX (64 * 1024)
+
+/* RTAS return status codes */
+#define RTAS_BUSY		-2    /* RTAS Busy */
+#define RTAS_EXTENDED_DELAY_MIN	9900
+#define RTAS_EXTENDED_DELAY_MAX	9905
+
+/*
+ * In general to call RTAS use rtas_token("string") to lookup
+ * an RTAS token for the given string (e.g. "event-scan").
+ * To actually perform the call use
+ *    ret = rtas_call(token, n_in, n_out, ...)
+ * Where n_in is the number of input parameters and
+ *       n_out is the number of output parameters
+ *
+ * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
+ * will be returned as a token.  rtas_call() does look for this
+ * token and error out gracefully so rtas_call(rtas_token("str"), ...)
+ * may be safely used for one-shot calls to RTAS.
+ *
+ */
+
+typedef u32 rtas_arg_t;
+
+struct rtas_args {
+	u32 token;
+	u32 nargs;
+	u32 nret; 
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};  
+
+extern struct rtas_args rtas_stop_self_args;
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+/* RTAS event classes */
+#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
+#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
+#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
+#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+
+/* RTAS event severity */
+#define RTAS_SEVERITY_FATAL		0x5
+#define RTAS_SEVERITY_ERROR		0x4
+#define RTAS_SEVERITY_ERROR_SYNC	0x3
+#define RTAS_SEVERITY_WARNING		0x2
+#define RTAS_SEVERITY_EVENT		0x1
+#define RTAS_SEVERITY_NO_ERROR		0x0
+
+/* RTAS event disposition */
+#define RTAS_DISP_FULLY_RECOVERED	0x0
+#define RTAS_DISP_LIMITED_RECOVERY	0x1
+#define RTAS_DISP_NOT_RECOVERED		0x2
+
+/* RTAS event initiator */
+#define RTAS_INITIATOR_UNKNOWN		0x0
+#define RTAS_INITIATOR_CPU		0x1
+#define RTAS_INITIATOR_PCI		0x2
+#define RTAS_INITIATOR_ISA		0x3
+#define RTAS_INITIATOR_MEMORY		0x4
+#define RTAS_INITIATOR_POWERMGM		0x5
+
+/* RTAS event target */
+#define RTAS_TARGET_UNKNOWN		0x0
+#define RTAS_TARGET_CPU			0x1
+#define RTAS_TARGET_PCI			0x2
+#define RTAS_TARGET_ISA			0x3
+#define RTAS_TARGET_MEMORY		0x4
+#define RTAS_TARGET_POWERMGM		0x5
+
+/* RTAS event type */
+#define RTAS_TYPE_RETRY			0x01
+#define RTAS_TYPE_TCE_ERR		0x02
+#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
+#define RTAS_TYPE_TIMEOUT		0x04
+#define RTAS_TYPE_DATA_PARITY		0x05
+#define RTAS_TYPE_ADDR_PARITY		0x06
+#define RTAS_TYPE_CACHE_PARITY		0x07
+#define RTAS_TYPE_ADDR_INVALID		0x08
+#define RTAS_TYPE_ECC_UNCORR		0x09
+#define RTAS_TYPE_ECC_CORR		0x0a
+#define RTAS_TYPE_EPOW			0x40
+#define RTAS_TYPE_PLATFORM		0xE0
+#define RTAS_TYPE_IO			0xE1
+#define RTAS_TYPE_INFO			0xE2
+#define RTAS_TYPE_DEALLOC		0xE3
+#define RTAS_TYPE_DUMP			0xE4
+/* I don't add PowerMGM events right now, this is a different topic */ 
+#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
+#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
+#define RTAS_TYPE_PMGM_LID_OPEN		0x62
+#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
+#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
+#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
+#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
+#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
+#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
+#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
+#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
+#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
+#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
+#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
+#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
+#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
+#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
+#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
+
+struct rtas_error_log {
+	unsigned long version:8;		/* Architectural version */
+	unsigned long severity:3;		/* Severity level of error */
+	unsigned long disposition:2;		/* Degree of recovery */
+	unsigned long extended:1;		/* extended log present? */
+	unsigned long /* reserved */ :2;	/* Reserved for future use */
+	unsigned long initiator:4;		/* Initiator of event */
+	unsigned long target:4;			/* Target of failed operation */
+	unsigned long type:8;			/* General event or error*/
+	unsigned long extended_log_length:32;	/* length in bytes */
+	unsigned char buffer[1];
+};
+
+struct flash_block {
+	char *data;
+	unsigned long length;
+};
+
+/* This struct is very similar but not identical to
+ * that needed by the rtas flash update.
+ * All we need to do for rtas is rewrite num_blocks
+ * into a version/length and translate the pointers
+ * to absolute.
+ */
+#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+struct flash_block_list {
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
+};
+struct flash_block_list_header { /* just the header of flash_block_list */
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+};
+extern struct flash_block_list_header rtas_firmware_flash_list;
+
+extern struct rtas_t rtas;
+
+extern void enter_rtas(unsigned long);
+extern int rtas_token(const char *service);
+extern int rtas_call(int token, int, int, int *, ...);
+extern void call_rtas_display_status(unsigned char);
+extern void rtas_restart(char *cmd);
+extern void rtas_power_off(void);
+extern void rtas_halt(void);
+extern void rtas_os_term(char *str);
+extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_power_level(int powerdomain, int *level);
+extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern void rtas_initialize(void);
+
+/* Given an RTAS status code of 9900..9905 compute the hinted delay */
+unsigned int rtas_extended_busy_delay_time(int status);
+static inline int rtas_is_extended_busy(int status)
+{
+	return status >= 9900 && status <= 9909;
+}
+
+extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+
+/* Error types logged.  */
+#define ERR_FLAG_ALREADY_LOGGED	0x0
+#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+
+/* All the types and not flags */
+#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+
+#define RTAS_DEBUG KERN_DEBUG "RTAS: "
+ 
+#define RTAS_ERROR_LOG_MAX 2048
+
+/*
+ * Return the firmware-specified size of the error log buffer
+ *  for all rtas calls that require an error buffer argument.
+ *  This includes 'check-exception' and 'rtas-last-error'.
+ */
+extern int rtas_get_error_log_max(void);
+
+/* Event Scan Parameters */
+#define EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define SURVEILLANCE_TOKEN	9000
+#define LOG_NUMBER		64		/* must be a power of two */
+#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
+
+/* Some RTAS ops require a data buffer and that buffer must be < 4G.
+ * Rather than having a memory allocator, just use this buffer
+ * (get the lock first), make the RTAS call.  Copy the data instead
+ * of holding the buffer for long.
+ */
+
+#define RTAS_DATA_BUF_SIZE 4096
+extern spinlock_t rtas_data_buf_lock;
+extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
+
+extern void rtas_stop_self(void);
+
+/* RMO buffer reserved for user-space RTAS use */
+extern unsigned long rtas_rmo_buf;
+
+#define GLOBAL_INTERRUPT_QUEUE 9005
+
+#endif /* _PPC64_RTAS_H */
diff --git a/include/asm-ppc64/rwsem.h b/include/asm-ppc64/rwsem.h
new file mode 100644
index 000000000000..bd5c2f093575
--- /dev/null
+++ b/include/asm-ppc64/rwsem.h
@@ -0,0 +1,167 @@
+/*
+ * include/asm-ppc64/rwsem.h: R/W semaphores for PPC using the stuff
+ * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_RWSEM_H
+#define _PPC64_RWSEM_H
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_RWSEM_XADD_H */
diff --git a/include/asm-ppc64/scatterlist.h b/include/asm-ppc64/scatterlist.h
new file mode 100644
index 000000000000..cecce6c6dfbb
--- /dev/null
+++ b/include/asm-ppc64/scatterlist.h
@@ -0,0 +1,31 @@
+#ifndef _PPC64_SCATTERLIST_H
+#define _PPC64_SCATTERLIST_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/dma.h>
+
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+	unsigned int length;
+
+	/* For TCE support */
+	u32 dma_address;
+	u32 dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#endif /* !(_PPC64_SCATTERLIST_H) */
diff --git a/include/asm-ppc64/seccomp.h b/include/asm-ppc64/seccomp.h
new file mode 100644
index 000000000000..c130c334bda1
--- /dev/null
+++ b/include/asm-ppc64/seccomp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on ppc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/include/asm-ppc64/sections.h b/include/asm-ppc64/sections.h
new file mode 100644
index 000000000000..308ca6f5ced2
--- /dev/null
+++ b/include/asm-ppc64/sections.h
@@ -0,0 +1,29 @@
+#ifndef _PPC64_SECTIONS_H
+#define _PPC64_SECTIONS_H
+
+extern char _end[];
+
+#include <asm-generic/sections.h>
+
+#define __pmac
+#define __pmacdata
+
+#define __prep
+#define __prepdata
+
+#define __chrp
+#define __chrpdata
+
+#define __openfirmware
+#define __openfirmwaredata
+
+
+static inline int in_kernel_text(unsigned long addr)
+{
+	if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
+		return 1;
+
+	return 0;
+}
+
+#endif
diff --git a/include/asm-ppc64/segment.h b/include/asm-ppc64/segment.h
new file mode 100644
index 000000000000..d80fb68cc79e
--- /dev/null
+++ b/include/asm-ppc64/segment.h
@@ -0,0 +1,6 @@
+#ifndef __PPC64_SEGMENT_H
+#define __PPC64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* __PPC64_SEGMENT_H */
diff --git a/include/asm-ppc64/semaphore.h b/include/asm-ppc64/semaphore.h
new file mode 100644
index 000000000000..aefe7753ea41
--- /dev/null
+++ b/include/asm-ppc64/semaphore.h
@@ -0,0 +1,98 @@
+#ifndef _PPC64_SEMAPHORE_H
+#define _PPC64_SEMAPHORE_H
+
+/*
+ * Remove spinlock-based RW semaphores; RW semaphore definitions are
+ * now in rwsem.h and we use the generic lib/rwsem.c implementation.
+ * Rework semaphores to use atomic_dec_if_positive.
+ * -- Paul Mackerras (paulus@samba.org)
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	/*
+	 * Note that any negative value of count is equivalent to 0,
+	 * but additionally indicates that some process(es) might be
+	 * sleeping on `wait'.
+	 */
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name, 1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int  __down_interruptible(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+
+	/*
+	 * Try to get the semaphore, take the slow path if we fail.
+	 */
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
+		__down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	return atomic_dec_if_positive(&sem->count) < 0;
+}
+
+static inline void up(struct semaphore * sem)
+{
+	if (unlikely(atomic_inc_return(&sem->count) <= 0))
+		__up(sem);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_PPC64_SEMAPHORE_H) */
diff --git a/include/asm-ppc64/sembuf.h b/include/asm-ppc64/sembuf.h
new file mode 100644
index 000000000000..172e59000767
--- /dev/null
+++ b/include/asm-ppc64/sembuf.h
@@ -0,0 +1,27 @@
+#ifndef _PPC64_SEMBUF_H
+#define _PPC64_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for PPC architecture.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _PPC64_SEMBUF_H */
diff --git a/include/asm-ppc64/serial.h b/include/asm-ppc64/serial.h
new file mode 100644
index 000000000000..d6bcb79b7d7b
--- /dev/null
+++ b/include/asm-ppc64/serial.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-ppc64/serial.h
+ */
+#ifndef _PPC64_SERIAL_H
+#define _PPC64_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Default baud base if not found in device-tree */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#endif /* _PPC64_SERIAL_H */
diff --git a/include/asm-ppc64/setup.h b/include/asm-ppc64/setup.h
new file mode 100644
index 000000000000..b257b8348c73
--- /dev/null
+++ b/include/asm-ppc64/setup.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_SETUP_H
+#define _PPC_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#endif /* _PPC_SETUP_H */
diff --git a/include/asm-ppc64/shmbuf.h b/include/asm-ppc64/shmbuf.h
new file mode 100644
index 000000000000..02e99d6ec925
--- /dev/null
+++ b/include/asm-ppc64/shmbuf.h
@@ -0,0 +1,43 @@
+#ifndef _PPC64_SHMBUF_H
+#define _PPC64_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for PPC64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _PPC64_SHMBUF_H */
diff --git a/include/asm-ppc64/shmparam.h b/include/asm-ppc64/shmparam.h
new file mode 100644
index 000000000000..b2825ceff05e
--- /dev/null
+++ b/include/asm-ppc64/shmparam.h
@@ -0,0 +1,13 @@
+#ifndef _PPC64_SHMPARAM_H
+#define _PPC64_SHMPARAM_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _PPC64_SHMPARAM_H */
diff --git a/include/asm-ppc64/sigcontext.h b/include/asm-ppc64/sigcontext.h
new file mode 100644
index 000000000000..6f8aee768c5e
--- /dev/null
+++ b/include/asm-ppc64/sigcontext.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_PPC64_SIGCONTEXT_H
+#define _ASM_PPC64_SIGCONTEXT_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/elf.h>
+
+
+struct sigcontext {
+	unsigned long	_unused[4];
+	int		signal;
+	int		_pad0;
+	unsigned long	handler;
+	unsigned long	oldmask;
+	struct pt_regs	__user *regs;
+	elf_gregset_t	gp_regs;
+	elf_fpregset_t	fp_regs;
+/*
+ * To maintain compatibility with current implementations the sigcontext is 
+ * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) 
+ * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This 
+ * allows the array of vector registers to be quadword aligned independent of 
+ * the alignment of the containing sigcontext or ucontext. It is the 
+ * responsibility of the code setting the sigcontext to set this pointer to 
+ * either NULL (if this processor does not support the VMX feature) or the 
+ * address of the first quadword within the allocated (vmx_reserve) area.
+ *
+ * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with 
+ * an array of 34 quadword entries (elf_vrregset_t).  The entries with 
+ * indexes 0-31 contain the corresponding vector registers.  The entry with 
+ * index 32 contains the vscr as the last word (offset 12) within the 
+ * quadword.  This allows the vscr to be stored as either a quadword (since 
+ * it must be copied via a vector register to/from storage) or as a word.  
+ * The entry with index 33 contains the vrsave as the first word (offset 0) 
+ * within the quadword.
+ */
+	elf_vrreg_t	__user *v_regs;
+	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+1];
+};
+
+#endif /* _ASM_PPC64_SIGCONTEXT_H */
diff --git a/include/asm-ppc64/siginfo.h b/include/asm-ppc64/siginfo.h
new file mode 100644
index 000000000000..3a7c23dcb5aa
--- /dev/null
+++ b/include/asm-ppc64/siginfo.h
@@ -0,0 +1,16 @@
+#ifndef _PPC64_SIGINFO_H
+#define _PPC64_SIGINFO_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _PPC64_SIGINFO_H */
diff --git a/include/asm-ppc64/signal.h b/include/asm-ppc64/signal.h
new file mode 100644
index 000000000000..fe5401adb41b
--- /dev/null
+++ b/include/asm-ppc64/signal.h
@@ -0,0 +1,159 @@
+#ifndef _ASMPPC64_SIGNAL_H
+#define _ASMPPC64_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/siginfo.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000u /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000u
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void __sigfunction(int);
+typedef __sigfunction __user * __sighandler_t;
+
+/* Type of the restorer function */
+typedef void __sigrestorer(void);
+typedef __sigrestorer __user * __sigrestorer_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestorer_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestorer_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+struct pt_regs;
+struct timespec;
+extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* _ASMPPC64_SIGNAL_H */
diff --git a/include/asm-ppc64/smp.h b/include/asm-ppc64/smp.h
new file mode 100644
index 000000000000..c8646fa999c2
--- /dev/null
+++ b/include/asm-ppc64/smp.h
@@ -0,0 +1,91 @@
+/* 
+ * smp.h: PPC64 specific SMP code.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC64_SMP_H
+#define _PPC64_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/paca.h>
+
+extern int boot_cpuid;
+extern int boot_cpuid_phys;
+
+extern void cpu_die(void);
+
+#ifdef CONFIG_SMP
+
+extern void smp_send_debugger_break(int cpu);
+struct pt_regs;
+extern void smp_message_recv(int, struct pt_regs *);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(cpumask_t map);
+int generic_cpu_disable(void);
+int generic_cpu_enable(unsigned int cpu);
+void generic_cpu_die(unsigned int cpu);
+void generic_mach_cpu_die(void);
+#endif
+
+#define __smp_processor_id() (get_paca()->paca_index)
+#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+
+extern cpumask_t cpu_sibling_map[NR_CPUS];
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION   0
+#define PPC_MSG_RESCHEDULE      1
+/* This is unused now */
+#if 0
+#define PPC_MSG_MIGRATE_TASK    2
+#endif
+#define PPC_MSG_DEBUGGER_BREAK  3
+
+void smp_init_iSeries(void);
+void smp_init_pSeries(void);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif /* CONFIG_SMP */
+
+#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
+#define set_hard_smp_processor_id(CPU, VAL) \
+	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern int smt_enabled_at_boot;
+
+extern int smp_mpic_probe(void);
+extern void smp_mpic_setup_cpu(int cpu);
+extern void smp_mpic_message_pass(int target, int msg);
+extern void smp_generic_kick_cpu(int nr);
+
+extern void smp_generic_give_timebase(void);
+extern void smp_generic_take_timebase(void);
+
+extern struct smp_ops_t *smp_ops;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(_PPC64_SMP_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/smu.h b/include/asm-ppc64/smu.h
new file mode 100644
index 000000000000..10b4397af9aa
--- /dev/null
+++ b/include/asm-ppc64/smu.h
@@ -0,0 +1,22 @@
+/*
+ * Definitions for talking to the SMU chip in newer G5 PowerMacs
+ */
+
+#include <linux/config.h>
+
+/*
+ * Basic routines for use by architecture. To be extended as
+ * we understand more of the chip
+ */
+extern int smu_init(void);
+extern int smu_present(void);
+extern void smu_shutdown(void);
+extern void smu_restart(void);
+extern int smu_get_rtc_time(struct rtc_time *time);
+extern int smu_set_rtc_time(struct rtc_time *time);
+
+/*
+ * SMU command buffer absolute address, exported by pmac_setup,
+ * this is allocated very early during boot.
+ */
+extern unsigned long smu_cmdbuf_abs;
diff --git a/include/asm-ppc64/socket.h b/include/asm-ppc64/socket.h
new file mode 100644
index 000000000000..59e00dfc8b8e
--- /dev/null
+++ b/include/asm-ppc64/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT	16
+#define SO_SNDLOWAT	17
+#define SO_RCVTIMEO	18
+#define SO_SNDTIMEO	19
+#define SO_PASSCRED	20
+#define SO_PEERCRED	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN           30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-ppc64/sockios.h b/include/asm-ppc64/sockios.h
new file mode 100644
index 000000000000..6bd1a22af4f6
--- /dev/null
+++ b/include/asm-ppc64/sockios.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_PPC64_SOCKIOS_H
+#define _ASM_PPC64_SOCKIOS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* _ASM_PPC64_SOCKIOS_H */
diff --git a/include/asm-ppc64/spinlock.h b/include/asm-ppc64/spinlock.h
new file mode 100644
index 000000000000..a9b2a1162cf7
--- /dev/null
+++ b/include/asm-ppc64/spinlock.h
@@ -0,0 +1,260 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+/*
+ * Simple spin lock operations.  
+ *
+ * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
+ *	Rework to support virtual processors
+ *
+ * Type of int is used as a full 64b word is not necessary.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/paca.h>
+#include <asm/hvcall.h>
+#include <asm/iSeries/HvCall.h>
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+typedef struct {
+	volatile signed int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#ifdef __KERNEL__
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0 }
+
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+static __inline__ void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__("lwsync	# spin_unlock": : :"memory");
+	lock->lock = 0;
+}
+
+/*
+ * On a system with shared processors (that is, where a physical
+ * processor is multiplexed between several virtual processors),
+ * there is no point spinning on a lock if the holder of the lock
+ * isn't currently scheduled on a physical processor.  Instead
+ * we detect this situation and ask the hypervisor to give the
+ * rest of our timeslice to the lock holder.
+ *
+ * So that we can tell which virtual processor is holding a lock,
+ * we put 0x80000000 | smp_processor_id() in the lock when it is
+ * held.  Conveniently, we have a word in the paca that holds this
+ * value.
+ */
+
+#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
+/* We only yield to the hypervisor if we are in shared processor mode */
+#define SHARED_PROCESSOR (get_paca()->lppaca.shared_proc)
+extern void __spin_yield(spinlock_t *lock);
+extern void __rw_yield(rwlock_t *lock);
+#else /* SPLPAR || ISERIES */
+#define __spin_yield(x)	barrier()
+#define __rw_yield(x)	barrier()
+#define SHARED_PROCESSOR	0
+#endif
+extern void spin_unlock_wait(spinlock_t *lock);
+
+/*
+ * This returns the old value in the lock, so we succeeded
+ * in getting the lock if the return value is 0.
+ */
+static __inline__ unsigned long __spin_trylock(spinlock_t *lock)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__(
+"	lwz		%1,%3(13)		# __spin_trylock\n\
+1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n\
+	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&lock->lock), "i" (offsetof(struct paca_struct, lock_token))
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static int __inline__ _raw_spin_trylock(spinlock_t *lock)
+{
+	return __spin_trylock(lock) == 0;
+}
+
+static void __inline__ _raw_spin_lock(spinlock_t *lock)
+{
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (likely(lock->lock != 0));
+		HMT_medium();
+	}
+}
+
+static void __inline__ _raw_spin_lock_flags(spinlock_t *lock, unsigned long flags)
+{
+	unsigned long flags_dis;
+
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		local_save_flags(flags_dis);
+		local_irq_restore(flags);
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (likely(lock->lock != 0));
+		HMT_medium();
+		local_irq_restore(flags_dis);
+	}
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+
+#define rwlock_init(x)		do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+#define read_can_lock(rw)	((rw)->lock >= 0)
+#define write_can_lock(rw)	(!(rw)->lock)
+
+static __inline__ void _raw_write_unlock(rwlock_t *rw)
+{
+	__asm__ __volatile__("lwsync		# write_unlock": : :"memory");
+	rw->lock = 0;
+}
+
+/*
+ * This returns the old value in the lock + 1,
+ * so we got a read lock if the return value is > 0.
+ */
+static long __inline__ __read_trylock(rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%1		# read_trylock\n\
+	extsw		%0,%0\n\
+	addic.		%0,%0,1\n\
+	ble-		2f\n\
+	stwcx.		%0,0,%1\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (&rw->lock)
+	: "cr0", "xer", "memory");
+
+	return tmp;
+}
+
+static int __inline__ _raw_read_trylock(rwlock_t *rw)
+{
+	return __read_trylock(rw) > 0;
+}
+
+static void __inline__ _raw_read_lock(rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__read_trylock(rw) > 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (likely(rw->lock < 0));
+		HMT_medium();
+	}
+}
+
+static void __inline__ _raw_read_unlock(rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"eieio				# read_unlock\n\
+1:	lwarx		%0,0,%1\n\
+	addic		%0,%0,-1\n\
+	stwcx.		%0,0,%1\n\
+	bne-		1b"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+/*
+ * This returns the old value in the lock,
+ * so we got the write lock if the return value is 0.
+ */
+static __inline__ long __write_trylock(rwlock_t *rw)
+{
+	long tmp, tmp2;
+
+	__asm__ __volatile__(
+"	lwz		%1,%3(13)	# write_trylock\n\
+1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n\
+	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock), "i" (offsetof(struct paca_struct, lock_token))
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static int __inline__ _raw_write_trylock(rwlock_t *rw)
+{
+	return __write_trylock(rw) == 0;
+}
+
+static void __inline__ _raw_write_lock(rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__write_trylock(rw) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (likely(rw->lock != 0));
+		HMT_medium();
+	}
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-ppc64/sstep.h b/include/asm-ppc64/sstep.h
new file mode 100644
index 000000000000..4a68db50ee6f
--- /dev/null
+++ b/include/asm-ppc64/sstep.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct pt_regs;
+
+/*
+ * We don't allow single-stepping an mtmsrd that would clear
+ * MSR_RI, since that would make the exception unrecoverable.
+ * Since we need to single-step to proceed from a breakpoint,
+ * we don't allow putting a breakpoint on an mtmsrd instruction.
+ * Similarly we don't allow breakpoints on rfid instructions.
+ * These macros tell us if an instruction is a mtmsrd or rfid.
+ */
+#define IS_MTMSRD(instr)	(((instr) & 0xfc0007fe) == 0x7c000164)
+#define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
+
+/* Emulate instructions that cause a transfer of control. */
+extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/include/asm-ppc64/stat.h b/include/asm-ppc64/stat.h
new file mode 100644
index 000000000000..973a5f97951d
--- /dev/null
+++ b/include/asm-ppc64/stat.h
@@ -0,0 +1,60 @@
+#ifndef _PPC64_STAT_H
+#define _PPC64_STAT_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned long	st_dev;
+	ino_t		st_ino;
+	nlink_t		st_nlink;
+	mode_t		st_mode;
+	uid_t 		st_uid;
+	gid_t 		st_gid;
+	unsigned long	st_rdev;
+	off_t		st_size;
+	unsigned long  	st_blksize;
+	unsigned long  	st_blocks;
+	unsigned long  	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long  	st_mtime;
+	unsigned long  	st_mtime_nsec;
+	unsigned long  	st_ctime;
+	unsigned long  	st_ctime_nsec;
+	unsigned long  	__unused4;
+	unsigned long  	__unused5;
+	unsigned long  	__unused6;
+};
+
+#define STAT_HAVE_NSEC 1
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long st_dev; 		/* Device.  */
+	unsigned long st_ino;		/* File serial number.  */
+	unsigned int st_mode;		/* File mode.  */
+	unsigned int st_nlink;		/* Link count.  */
+	unsigned int st_uid;		/* User ID of the file's owner.  */
+	unsigned int st_gid;		/* Group ID of the file's group. */
+	unsigned long st_rdev; 		/* Device number, if device.  */
+	unsigned short __pad2;
+	long st_size;			/* Size of file, in bytes.  */
+	int  st_blksize;		/* Optimal block size for I/O.  */
+
+	long st_blocks;			/* Number 512-byte blocks allocated. */
+	int   st_atime;			/* Time of last access.  */
+	int   st_atime_nsec;
+	int   st_mtime;			/* Time of last modification.  */
+	int   st_mtime_nsec;
+	int   st_ctime;			/* Time of last status change.  */
+	int   st_ctime_nsec;
+	unsigned int   __unused4;
+	unsigned int   __unused5;
+};
+#endif
diff --git a/include/asm-ppc64/statfs.h b/include/asm-ppc64/statfs.h
new file mode 100644
index 000000000000..3c985e5246a7
--- /dev/null
+++ b/include/asm-ppc64/statfs.h
@@ -0,0 +1,61 @@
+#ifndef _PPC64_STATFS_H
+#define _PPC64_STATFS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+#include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * We're already 64-bit, so duplicate the definition
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif  /* _PPC64_STATFS_H */
diff --git a/include/asm-ppc64/string.h b/include/asm-ppc64/string.h
new file mode 100644
index 000000000000..eeca68ef1e91
--- /dev/null
+++ b/include/asm-ppc64/string.h
@@ -0,0 +1,35 @@
+#ifndef _PPC64_STRING_H_
+#define _PPC64_STRING_H_
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern int strcasecmp(const char *, const char *);
+extern int strncasecmp(const char *, const char *, int);
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* _PPC64_STRING_H_ */
diff --git a/include/asm-ppc64/system.h b/include/asm-ppc64/system.h
new file mode 100644
index 000000000000..98d120ca8a91
--- /dev/null
+++ b/include/asm-ppc64/system.h
@@ -0,0 +1,306 @@
+#ifndef __PPC64_SYSTEM_H
+#define __PPC64_SYSTEM_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/hw_irq.h>
+#include <asm/memory.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores.  Lwsync is fine for
+ * rmb(), though.
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight eieio barrier on
+ * SMP since it is only used to order updates to system memory.
+ */
+#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("lwsync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
+#define set_wmb(var, value)	do { var = value; smp_wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	__asm__ __volatile__ ("eieio" : : : "memory")
+#define smp_read_barrier_depends()  read_barrier_depends()
+#else
+#define smp_mb()	__asm__ __volatile__("": : :"memory")
+#define smp_rmb()	__asm__ __volatile__("": : :"memory")
+#define smp_wmb()	__asm__ __volatile__("": : :"memory")
+#define smp_read_barrier_depends()  do { } while(0)
+#endif /* CONFIG_SMP */
+
+#ifdef __KERNEL__
+struct task_struct;
+struct pt_regs;
+
+#ifdef CONFIG_DEBUGGER
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+	if (unlikely(__ ## __NAME)) \
+		return __ ## __NAME(regs); \
+	return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#ifdef CONFIG_XMON
+extern void xmon_init(void);
+#endif
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int fix_alignment(struct pt_regs *regs);
+extern void bad_page_fault(struct pt_regs *regs, unsigned long address,
+			   int sig);
+extern void show_regs(struct pt_regs * regs);
+extern void low_hash_fault(struct pt_regs *regs, unsigned long address);
+extern int die(const char *str, struct pt_regs *regs, long err);
+
+extern int _get_PVR(void);
+extern void giveup_fpu(struct task_struct *);
+extern void disable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_fp(void);
+extern void giveup_altivec(struct task_struct *);
+extern void disable_kernel_altivec(void);
+extern void enable_kernel_altivec(void);
+extern int emulate_altivec(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
+extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int mem_init_done;	/* set on boot once kmalloc can be called */
+
+/* EBCDIC -> ASCII conversion for [0-9A-Z] on iSeries */
+extern unsigned char e2a(unsigned char);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+				       struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct * _switch(struct thread_struct *prev,
+				    struct thread_struct *next);
+
+static inline int __is_processor(unsigned long pv)
+{
+	unsigned long pvr;
+	asm("mfspr %0, 0x11F" : "=r" (pvr)); 
+	return(PVR_VER(pvr) == pv);
+}
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ *
+ * Inline asm pulled from arch/ppc/kernel/misc.S so ppc64
+ * is more like most of the other architectures.
+ */
+static __inline__ unsigned long
+__xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	lwarx %0,0,%3		# __xchg_u32\n\
+	stwcx. %2,0,%3\n\
+2:	bne- 1b"
+	ISYNC_ON_SMP
+ 	: "=&r" (dummy), "=m" (*m)
+	: "r" (val), "r" (m)
+	: "cc", "memory");
+
+	return (dummy);
+}
+
+static __inline__ unsigned long
+__xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	EIEIO_ON_SMP
+"1:	ldarx %0,0,%3		# __xchg_u64\n\
+	stdcx. %2,0,%3\n\
+2:	bne- 1b"
+	ISYNC_ON_SMP
+	: "=&r" (dummy), "=m" (*m)
+	: "r" (val), "r" (m)
+	: "cc", "memory");
+
+	return (dummy);
+}
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__xchg(volatile void *ptr, unsigned long x, int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+	case 8:
+		return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define tas(ptr) (xchg((ptr),1))
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile int *p, int old, int new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+	EIEIO_ON_SMP
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n\
+	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "=m" (*p)
+	: "r" (p), "r" (old), "r" (new), "m" (*p)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __inline__ unsigned long
+__cmpxchg_u64(volatile long *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+	EIEIO_ON_SMP
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "=m" (*p)
+	: "r" (p), "r" (old), "r" (new), "m" (*p)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+/*
+ * We handle most unaligned accesses in hardware. On the other hand 
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ */
+#define NET_IP_ALIGN   0
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-ppc64/systemcfg.h b/include/asm-ppc64/systemcfg.h
new file mode 100644
index 000000000000..9b86b53129aa
--- /dev/null
+++ b/include/asm-ppc64/systemcfg.h
@@ -0,0 +1,64 @@
+#ifndef _SYSTEMCFG_H
+#define _SYSTEMCFG_H
+
+/* 
+ * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Change Activity:
+ * 2002/09/30 : bergner  : Created
+ * End Change Activity 
+ */
+
+/*
+ * If the major version changes we are incompatible.
+ * Minor version changes are a hint.
+ */
+#define SYSTEMCFG_MAJOR 1
+#define SYSTEMCFG_MINOR 1
+
+#ifndef __ASSEMBLY__
+
+#include <linux/unistd.h>
+
+#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+
+struct systemcfg {
+	__u8  eye_catcher[16];		/* Eyecatcher: SYSTEMCFG:PPC64	0x00 */
+	struct {			/* Systemcfg version numbers	     */
+		__u32 major;		/* Major number			0x10 */
+		__u32 minor;		/* Minor number			0x14 */
+	} version;
+
+	__u32 platform;			/* Platform flags		0x18 */
+	__u32 processor;		/* Processor type		0x1C */
+	__u64 processorCount;		/* # of physical processors	0x20 */
+	__u64 physicalMemorySize;	/* Size of real memory(B)	0x28 */
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u64 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	/* next four are no longer used except to be exported to /proc */
+	__u32 dcache_size;		/* L1 d-cache size		0x60 */
+	__u32 dcache_line_size;		/* L1 d-cache line size		0x64 */
+	__u32 icache_size;		/* L1 i-cache size		0x68 */
+	__u32 icache_line_size;		/* L1 i-cache line size		0x6C */
+   	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of available syscalls 0x70 */
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of available syscalls */
+};
+
+#ifdef __KERNEL__
+extern struct systemcfg *systemcfg;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SYSTEMCFG_H */
diff --git a/include/asm-ppc64/termbits.h b/include/asm-ppc64/termbits.h
new file mode 100644
index 000000000000..d1a2bee10cef
--- /dev/null
+++ b/include/asm-ppc64/termbits.h
@@ -0,0 +1,193 @@
+#ifndef _PPC64_TERMBITS_H
+#define _PPC64_TERMBITS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 	         0
+#define VQUIT 	         1
+#define VERASE 	         2
+#define VKILL	         3
+#define VEOF	         4
+#define VMIN	         5
+#define VEOL	         6
+#define VTIME	         7
+#define VEOL2	         8
+#define VSWTC	         9
+#define VWERASE 	10
+#define VREPRINT	11
+#define VSUSP 		12
+#define VSTART		13
+#define VSTOP		14
+#define VLNEXT		15
+#define VDISCARD	16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define	IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define   XTABS	00006000	/* required by POSIX to == TAB3 */
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+
+/* c_cflag bit meaning */
+#define CBAUD	0000377
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define  EXTA   B19200
+#define  EXTB   B38400
+#define  CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _PPC64_TERMBITS_H */
diff --git a/include/asm-ppc64/termios.h b/include/asm-ppc64/termios.h
new file mode 100644
index 000000000000..02c3d283aa62
--- /dev/null
+++ b/include/asm-ppc64/termios.h
@@ -0,0 +1,235 @@
+#ifndef _PPC64_TERMIOS_H
+#define _PPC64_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://www.cs.uit.no/~dagb/irda/irda.html */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+
+#ifdef __KERNEL__
+/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
+#endif
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	(termios)->x = (0xffff0000 & (termios)->x) | __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _PPC64_TERMIOS_H */
diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h
new file mode 100644
index 000000000000..037b5e06083c
--- /dev/null
+++ b/include/asm-ppc64/thread_info.h
@@ -0,0 +1,125 @@
+/* thread_info.h: PPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	int		cpu;			/* cpu we're on */
+	int		preempt_count;
+	struct restart_block restart_block;
+	/* set by force_successful_syscall_return */
+	unsigned char	syscall_noerror;
+	/* low level flags - has atomic operations done on it */
+	unsigned long	flags ____cacheline_aligned_in_smp;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.flags =	0,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* thread information allocation */
+
+#define THREAD_ORDER		2
+#define THREAD_SIZE		(PAGE_SIZE << THREAD_ORDER)
+#define THREAD_SHIFT		(PAGE_SHIFT + THREAD_ORDER)
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+	({							\
+		struct thread_info *ret;			\
+								\
+		ret = kmalloc(THREAD_SIZE, GFP_KERNEL);		\
+		if (ret)					\
+			memset(ret, 0, THREAD_SIZE);		\
+		ret;						\
+	})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)	kfree(ti)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("clrrdi %0,1,%1" : "=r"(ti) : "i" (THREAD_SHIFT));
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_32BIT		5	/* 32 bit binary */
+#define TIF_RUN_LIGHT		6	/* iSeries run light */
+#define TIF_ABI_PENDING		7	/* 32/64 bit switch needed */
+#define TIF_SYSCALL_AUDIT	8	/* syscall auditing active */
+#define TIF_SINGLESTEP		9	/* singlestepping active */
+#define TIF_MEMDIE		10
+#define TIF_SECCOMP		11	/* secure computing */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_RUN_LIGHT		(1<<TIF_RUN_LIGHT)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
+
+#define _TIF_USER_WORK_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
+				 _TIF_NEED_RESCHED)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-ppc64/time.h b/include/asm-ppc64/time.h
new file mode 100644
index 000000000000..8d6e3760ee10
--- /dev/null
+++ b/include/asm-ppc64/time.h
@@ -0,0 +1,115 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC64_TIME_H
+#define __PPC64_TIME_H
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/processor.h>
+#include <asm/paca.h>
+#include <asm/iSeries/HvCall.h>
+
+/* time.c */
+extern unsigned long tb_ticks_per_jiffy;
+extern unsigned long tb_ticks_per_usec;
+extern unsigned long tb_ticks_per_sec;
+extern unsigned long tb_to_xs;
+extern unsigned      tb_to_us;
+extern unsigned long tb_last_stamp;
+
+struct rtc_time;
+extern void to_tm(int tim, struct rtc_time * tm);
+extern time_t last_rtc_update;
+
+/*
+ * By putting all of this stuff into a single struct we 
+ * reduce the number of cache lines touched by do_gettimeofday.
+ * Both by collecting all of the data in one cache line and
+ * by touching only one TOC entry
+ */
+struct gettimeofday_vars {
+	unsigned long tb_to_xs;
+	unsigned long stamp_xsec;
+	unsigned long tb_orig_stamp;
+};
+
+struct gettimeofday_struct {
+	unsigned long tb_ticks_per_sec;
+	struct gettimeofday_vars vars[2];
+	struct gettimeofday_vars * volatile varp;
+	unsigned      var_idx;
+	unsigned      tb_to_us;
+};
+
+struct div_result {
+	unsigned long result_high;
+	unsigned long result_low;
+};
+
+int via_calibrate_decr(void);
+
+static __inline__ unsigned long get_tb(void)
+{
+	return mftb();
+}
+
+/* Accessor functions for the decrementer register. */
+static __inline__ unsigned int get_dec(void)
+{
+	return (mfspr(SPRN_DEC));
+}
+
+static __inline__ void set_dec(int val)
+{
+#ifdef CONFIG_PPC_ISERIES
+	struct paca_struct *lpaca = get_paca();
+	int cur_dec;
+
+	if (lpaca->lppaca.shared_proc) {
+		lpaca->lppaca.virtual_decr = val;
+		cur_dec = get_dec();
+		if (cur_dec > val)
+			HvCall_setVirtualDecr();
+	} else
+#endif
+		mtspr(SPRN_DEC, val);
+}
+
+static inline unsigned long tb_ticks_since(unsigned long tstamp)
+{
+	return get_tb() - tstamp;
+}
+
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+#define mulhdu(x,y) \
+({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+
+unsigned mulhwu_scale_factor(unsigned, unsigned);
+void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
+		   unsigned divisor, struct div_result *dr );
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+        u64 current_tb;  /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC64_TIME_H */
diff --git a/include/asm-ppc64/timex.h b/include/asm-ppc64/timex.h
new file mode 100644
index 000000000000..8db4da4064cd
--- /dev/null
+++ b/include/asm-ppc64/timex.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-ppc/timex.h
+ *
+ * PPC64 architecture timex specifications
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASMPPC64_TIMEX_H
+#define _ASMPPC64_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	cycles_t ret;
+
+	__asm__ __volatile__("mftb %0" : "=r" (ret) : );
+	return ret;
+}
+
+#endif
diff --git a/include/asm-ppc64/tlb.h b/include/asm-ppc64/tlb.h
new file mode 100644
index 000000000000..97cb696ce68d
--- /dev/null
+++ b/include/asm-ppc64/tlb.h
@@ -0,0 +1,39 @@
+/*
+ *	TLB shootdown specifics for PPC64
+ *
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _PPC64_TLB_H
+#define _PPC64_TLB_H
+
+#include <asm/tlbflush.h>
+
+struct mmu_gather;
+
+extern void pte_free_finish(void);
+
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	flush_tlb_pending();
+	pte_free_finish();
+}
+
+/* Avoid pulling in another include just for this */
+#define check_pgt_cache()	do { } while (0)
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+/* Nothing needed here in fact... */
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+#endif /* _PPC64_TLB_H */
diff --git a/include/asm-ppc64/tlbflush.h b/include/asm-ppc64/tlbflush.h
new file mode 100644
index 000000000000..45411a67e082
--- /dev/null
+++ b/include/asm-ppc64/tlbflush.h
@@ -0,0 +1,54 @@
+#ifndef _PPC64_TLBFLUSH_H
+#define _PPC64_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct mm_struct;
+struct ppc64_tlb_batch {
+	unsigned long index;
+	unsigned long context;
+	struct mm_struct *mm;
+	pte_t pte[PPC64_TLB_BATCH_NR];
+	unsigned long addr[PPC64_TLB_BATCH_NR];
+	unsigned long vaddr[PPC64_TLB_BATCH_NR];
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+static inline void flush_tlb_pending(void)
+{
+	struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	put_cpu_var(ppc64_tlb_batch);
+}
+
+#define flush_tlb_mm(mm)			flush_tlb_pending()
+#define flush_tlb_page(vma, addr)		flush_tlb_pending()
+#define flush_tlb_page_nohash(vma, addr)       	do { } while (0)
+#define flush_tlb_range(vma, start, end) \
+		do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_kernel_range(start, end)	flush_tlb_pending()
+#define flush_tlb_pgtables(mm, start, end)	do { } while (0)
+
+extern void flush_hash_page(unsigned long context, unsigned long ea, pte_t pte,
+			    int local);
+void flush_hash_range(unsigned long context, unsigned long number, int local);
+
+#endif /* _PPC64_TLBFLUSH_H */
diff --git a/include/asm-ppc64/topology.h b/include/asm-ppc64/topology.h
new file mode 100644
index 000000000000..d58d9dd79998
--- /dev/null
+++ b/include/asm-ppc64/topology.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_PPC64_TOPOLOGY_H
+#define _ASM_PPC64_TOPOLOGY_H
+
+#include <linux/config.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_NUMA
+
+static inline int cpu_to_node(int cpu)
+{
+	int node;
+
+	node = numa_cpu_lookup_table[cpu];
+
+#ifdef DEBUG_NUMA
+	BUG_ON(node == -1);
+#endif
+
+	return node;
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+#define nr_cpus_node(node)	(nr_cpus_in_node[node])
+
+/* sched_domains SD_NODE_INIT for PPC64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#else /* !CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_PPC64_TOPOLOGY_H */
diff --git a/include/asm-ppc64/types.h b/include/asm-ppc64/types.h
new file mode 100644
index 000000000000..5b8c2cfa1138
--- /dev/null
+++ b/include/asm-ppc64/types.h
@@ -0,0 +1,80 @@
+#ifndef _PPC64_TYPES_H
+#define _PPC64_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+typedef unsigned int umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+typedef struct {
+	__u32 u[4];
+} __attribute((aligned(16))) __vector128;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long s64;
+typedef unsigned long u64;
+
+typedef __vector128 vector128;
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+typedef struct {
+	unsigned long entry;
+	unsigned long toc;
+	unsigned long env;
+} func_descr_t;
+
+typedef unsigned int kmem_bufctl_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _PPC64_TYPES_H */
diff --git a/include/asm-ppc64/uaccess.h b/include/asm-ppc64/uaccess.h
new file mode 100644
index 000000000000..05b5943ab1ee
--- /dev/null
+++ b/include/asm-ppc64/uaccess.h
@@ -0,0 +1,346 @@
+#ifndef _PPC64_UACCESS_H
+#define _PPC64_UACCESS_H
+
+/* 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(0UL)
+#define USER_DS		MAKE_MM_SEG(0xf000000000000000UL)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/*
+ * Use the alpha trick for checking ranges:
+ *
+ * Is a address valid? This does a straightforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * We dont have to check for high bits in (addr+size) because the first
+ * two checks force the maximum result to be below the start of the
+ * kernel region.
+ */
+#define __access_ok(addr,size,segment) \
+	(((segment).seg & (addr | size )) == 0)
+
+#define access_ok(type,addr,size) \
+	__access_ok(((__force unsigned long)(addr)),(size),get_fs())
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ */
+#define get_user(x,ptr) \
+  __get_user_check((x),(ptr),sizeof(*(ptr)))
+#define put_user(x,ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	might_sleep();						\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x),(ptr),(size),__pu_err,-EFAULT);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	void __user *__pu_addr = (ptr);					\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))			\
+		__put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT);	\
+	__pu_err;							\
+})
+
+#define __put_user_size(x,ptr,size,retval,errret)			\
+do {									\
+	retval = 0;							\
+	switch (size) {							\
+	  case 1: __put_user_asm(x,ptr,retval,"stb",errret); break;	\
+	  case 2: __put_user_asm(x,ptr,retval,"sth",errret); break;	\
+	  case 4: __put_user_asm(x,ptr,retval,"stw",errret); break;	\
+	  case 8: __put_user_asm(x,ptr,retval,"std",errret); break; 	\
+	  default: __put_user_bad();					\
+	}								\
+} while (0)
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op, errret)		\
+	__asm__ __volatile__(					\
+		"1:	"op" %1,0(%2)  	# put_user\n" 	 	\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 3\n"				\
+		"	.llong 1b,3b\n"				\
+		".previous"					\
+		: "=r"(err)					\
+		: "r"(x), "b"(addr), "i"(errret), "0"(err))
+
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err, __gu_val;				\
+	might_sleep();						\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT, __gu_val = 0;				\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	might_sleep();							\
+	if (access_ok(VERIFY_READ,__gu_addr,size))			\
+		__get_user_size(__gu_val,__gu_addr,(size),__gu_err,-EFAULT);\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval,errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __get_user_asm(x,ptr,retval,"lbz",errret); break;	\
+	  case 2: __get_user_asm(x,ptr,retval,"lhz",errret); break;	\
+	  case 4: __get_user_asm(x,ptr,retval,"lwz",errret); break;	\
+	  case 8: __get_user_asm(x,ptr,retval,"ld",errret);  break;	\
+	  default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, op, errret)	\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)	# get_user\n"  	\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 3\n"			\
+		"	.llong 1b,3b\n"			\
+		".previous"				\
+		: "=r"(err), "=r"(x)			\
+		: "b"(addr), "i"(errret), "0"(err))
+
+/* more complex routines */
+
+extern unsigned long __copy_tofrom_user(void __user *to, const void __user *from,
+					unsigned long size);
+
+static inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		case 8:
+			__get_user_size(*(u64 *)to, from, 8, ret, 8);
+			return ret;
+		}
+	}
+	return __copy_tofrom_user((__force void __user *) to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline unsigned long
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1);
+			return ret;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2);
+			return ret;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4);
+			return ret;
+		case 8:
+			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret, 8);
+			return ret;
+		}
+	}
+	return __copy_tofrom_user(to, (__force const void __user *) from, n);
+}
+
+static inline unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_sleep();
+	return __copy_to_user_inatomic(to, from, n);
+}
+
+#define __copy_in_user(to, from, size) \
+	__copy_tofrom_user((to), (from), (size))
+
+extern unsigned long copy_from_user(void *to, const void __user *from,
+				    unsigned long n);
+extern unsigned long copy_to_user(void __user *to, const void *from,
+				  unsigned long n);
+extern unsigned long copy_in_user(void __user *to, const void __user *from,
+				  unsigned long n);
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline unsigned long
+clear_user(void __user *addr, unsigned long size)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		size = __clear_user(addr, size);
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, src, 1)))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+extern int __strnlen_user(const char __user *str, long len);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ */
+static inline int strnlen_user(const char __user *str, long len)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, str, 1)))
+		return __strnlen_user(str, len);
+	return 0;
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+
+#endif	/* _PPC64_UACCESS_H */
diff --git a/include/asm-ppc64/ucontext.h b/include/asm-ppc64/ucontext.h
new file mode 100644
index 000000000000..ef8cc5b37542
--- /dev/null
+++ b/include/asm-ppc64/ucontext.h
@@ -0,0 +1,22 @@
+#ifndef _ASMPPC64_UCONTEXT_H
+#define _ASMPPC64_UCONTEXT_H
+
+#include <asm/sigcontext.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	sigset_t	  uc_sigmask;
+	sigset_t	  __unsued[15];	/* Allow for uc_sigmask growth */
+	struct sigcontext uc_mcontext;  /* last for extensibility */
+};
+
+#endif /* _ASMPPC64_UCONTEXT_H */
diff --git a/include/asm-ppc64/udbg.h b/include/asm-ppc64/udbg.h
new file mode 100644
index 000000000000..a6e04d014b2b
--- /dev/null
+++ b/include/asm-ppc64/udbg.h
@@ -0,0 +1,28 @@
+#ifndef __UDBG_HDR
+#define __UDBG_HDR
+
+#include <linux/compiler.h>
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+void udbg_init_uart(void __iomem *comport, unsigned int speed);
+void udbg_putc(unsigned char c);
+unsigned char udbg_getc(void);
+int udbg_getc_poll(void);
+void udbg_puts(const char *s);
+int udbg_write(const char *s, int n);
+int udbg_read(char *buf, int buflen);
+struct console;
+void udbg_console_write(struct console *con, const char *s, unsigned int n);
+void udbg_printf(const char *fmt, ...);
+void udbg_ppcdbg(unsigned long flags, const char *fmt, ...);
+unsigned long udbg_ifdebug(unsigned long flags);
+
+#endif
diff --git a/include/asm-ppc64/unaligned.h b/include/asm-ppc64/unaligned.h
new file mode 100644
index 000000000000..636e93c4f379
--- /dev/null
+++ b/include/asm-ppc64/unaligned.h
@@ -0,0 +1,21 @@
+#ifndef __PPC64_UNALIGNED_H
+#define __PPC64_UNALIGNED_H
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif /* __PPC64_UNALIGNED_H */
diff --git a/include/asm-ppc64/uninorth.h b/include/asm-ppc64/uninorth.h
new file mode 100644
index 000000000000..7ad7059f2c80
--- /dev/null
+++ b/include/asm-ppc64/uninorth.h
@@ -0,0 +1,2 @@
+#include <asm-ppc/uninorth.h>
+
diff --git a/include/asm-ppc64/unistd.h b/include/asm-ppc64/unistd.h
new file mode 100644
index 000000000000..605d91e011ec
--- /dev/null
+++ b/include/asm-ppc64/unistd.h
@@ -0,0 +1,482 @@
+#ifndef _ASM_PPC_UNISTD_H_
+#define _ASM_PPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+/* #define __NR_mmap2		192	32bit only */
+/* #define __NR_truncate64	193	32bit only */
+/* #define __NR_ftruncate64	194	32bit only */
+/* #define __NR_stat64		195	32bit only */
+/* #define __NR_lstat64		196	32bit only */
+/* #define __NR_fstat64		197	32bit only */
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+/* #define __NR_fcntl64		204	32bit only */
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+/* #define __NR_sendfile64	226	32bit only */
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+/* #define __NR_fadvise64_64	254	32bit only */
+#define __NR_rtas		255
+/* Number 256 is reserved for sys_debug_setcontext */
+/* Number 257 is reserved for vserver */
+/* Number 258 is reserved for new sys_remap_file_pages */
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+
+#define __NR_syscalls		273
+#ifdef __KERNEL__
+#define NR_syscalls	__NR_syscalls
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* On powerpc a system call basically clobbers the same registers like a
+ * function call, with the exception of LR (which is needed for the
+ * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal
+ * an error return status).
+ */
+
+#define __syscall_nr(nr, type, name, args...)				\
+	unsigned long __sc_ret, __sc_err;				\
+	{								\
+		register unsigned long __sc_0  __asm__ ("r0");		\
+		register unsigned long __sc_3  __asm__ ("r3");		\
+		register unsigned long __sc_4  __asm__ ("r4");		\
+		register unsigned long __sc_5  __asm__ ("r5");		\
+		register unsigned long __sc_6  __asm__ ("r6");		\
+		register unsigned long __sc_7  __asm__ ("r7");		\
+		register unsigned long __sc_8  __asm__ ("r8");		\
+									\
+		__sc_loadargs_##nr(name, args);				\
+		__asm__ __volatile__					\
+			("sc           \n\t"				\
+			 "mfcr %0      "				\
+			: "=&r" (__sc_0),				\
+			  "=&r" (__sc_3),  "=&r" (__sc_4),		\
+			  "=&r" (__sc_5),  "=&r" (__sc_6),		\
+			  "=&r" (__sc_7),  "=&r" (__sc_8)		\
+			: __sc_asm_input_##nr				\
+			: "cr0", "ctr", "memory",			\
+			        "r9", "r10","r11", "r12");		\
+		__sc_ret = __sc_3;					\
+		__sc_err = __sc_0;					\
+	}								\
+	if (__sc_err & 0x10000000)					\
+	{								\
+		errno = __sc_ret;					\
+		__sc_ret = -1;						\
+	}								\
+	return (type) __sc_ret
+
+#define __sc_loadargs_0(name, dummy...)					\
+	__sc_0 = __NR_##name
+#define __sc_loadargs_1(name, arg1)					\
+	__sc_loadargs_0(name);						\
+	__sc_3 = (unsigned long) (arg1)
+#define __sc_loadargs_2(name, arg1, arg2)				\
+	__sc_loadargs_1(name, arg1);					\
+	__sc_4 = (unsigned long) (arg2)
+#define __sc_loadargs_3(name, arg1, arg2, arg3)				\
+	__sc_loadargs_2(name, arg1, arg2);				\
+	__sc_5 = (unsigned long) (arg3)
+#define __sc_loadargs_4(name, arg1, arg2, arg3, arg4)			\
+	__sc_loadargs_3(name, arg1, arg2, arg3);			\
+	__sc_6 = (unsigned long) (arg4)
+#define __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5)		\
+	__sc_loadargs_4(name, arg1, arg2, arg3, arg4);			\
+	__sc_7 = (unsigned long) (arg5)
+#define __sc_loadargs_6(name, arg1, arg2, arg3, arg4, arg5, arg6)	\
+	__sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5);		\
+	__sc_8 = (unsigned long) (arg6)
+
+#define __sc_asm_input_0 "0" (__sc_0)
+#define __sc_asm_input_1 __sc_asm_input_0, "1" (__sc_3)
+#define __sc_asm_input_2 __sc_asm_input_1, "2" (__sc_4)
+#define __sc_asm_input_3 __sc_asm_input_2, "3" (__sc_5)
+#define __sc_asm_input_4 __sc_asm_input_3, "4" (__sc_6)
+#define __sc_asm_input_5 __sc_asm_input_4, "5" (__sc_7)
+#define __sc_asm_input_6 __sc_asm_input_5, "6" (__sc_8)
+
+#define _syscall0(type,name)						\
+type name(void)								\
+{									\
+	__syscall_nr(0, type, name);					\
+}
+
+#define _syscall1(type,name,type1,arg1)					\
+type name(type1 arg1)							\
+{									\
+	__syscall_nr(1, type, name, arg1);				\
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1, type2 arg2)					\
+{									\
+	__syscall_nr(2, type, name, arg1, arg2);			\
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1, type2 arg2, type3 arg3)				\
+{									\
+	__syscall_nr(3, type, name, arg1, arg2, arg3);			\
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4)		\
+{									\
+	__syscall_nr(4, type, name, arg1, arg2, arg3, arg4);		\
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5)	\
+{									\
+	__syscall_nr(5, type, name, arg1, arg2, arg3, arg4, arg5);	\
+}
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6)	\
+{									\
+	__syscall_nr(6, type, name, arg1, arg2, arg3, arg4, arg5, arg6);	\
+}
+
+#ifdef __KERNEL_SYSCALLS__
+
+/*
+ * Forking from kernel space will result in the child getting a new,
+ * empty kernel stack area.  Thus the child cannot access automatic
+ * variables set in the parent unless they are in registers, and the
+ * procedure where the fork was done cannot return to its caller in
+ * the child.
+ */
+
+/*
+ * System call prototypes.
+ */
+static inline _syscall3(int, execve, __const__ char *, file, char **, argv,
+			char **,envp)
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+unsigned long sys_mmap(unsigned long addr, size_t len, unsigned long prot,
+		       unsigned long flags, unsigned long fd, off_t offset);
+struct pt_regs;
+int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+		unsigned long a3, unsigned long a4, unsigned long a5,
+		struct pt_regs *regs);
+int sys_clone(unsigned long clone_flags, unsigned long p2, unsigned long p3,
+		unsigned long p4, unsigned long p5, unsigned long p6,
+		struct pt_regs *regs);
+int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3,
+		unsigned long p4, unsigned long p5, unsigned long p6,
+		struct pt_regs *regs);
+int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3,
+		unsigned long p4, unsigned long p5, unsigned long p6,
+		struct pt_regs *regs);
+int sys_pipe(int __user *fildes);
+int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+		      struct sigaction __user *oact, size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t." #x "\n\t.set\t." #x ",.sys_ni_syscall")
+
+#endif		/* __KERNEL__ */
+
+#endif		/* __ASSEMBLY__ */
+
+#endif /* _ASM_PPC_UNISTD_H_ */
diff --git a/include/asm-ppc64/user.h b/include/asm-ppc64/user.h
new file mode 100644
index 000000000000..d7d6554a421f
--- /dev/null
+++ b/include/asm-ppc64/user.h
@@ -0,0 +1,58 @@
+#ifndef _PPC_USER_H
+#define _PPC_USER_H
+
+/* Adapted from <asm-alpha/user.h> 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _PPC_USER_H */
diff --git a/include/asm-ppc64/vdso.h b/include/asm-ppc64/vdso.h
new file mode 100644
index 000000000000..b74e16c0cf01
--- /dev/null
+++ b/include/asm-ppc64/vdso.h
@@ -0,0 +1,83 @@
+#ifndef __PPC64_VDSO_H__
+#define __PPC64_VDSO_H__
+
+#ifdef __KERNEL__
+
+/* Default link addresses for the vDSOs */
+#define VDSO32_LBASE	0
+#define VDSO64_LBASE	0
+
+/* Default map addresses */
+#define VDSO32_MBASE	0x100000
+#define VDSO64_MBASE	0x100000
+
+#define VDSO_VERSION_STRING	LINUX_2.6.12
+
+/* Define if 64 bits VDSO has procedure descriptors */
+#undef VDS64_HAS_DESCRIPTORS
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int vdso64_pages;
+extern unsigned int vdso32_pages;
+
+/* Offsets relative to thread->vdso_base */
+extern unsigned long vdso64_rt_sigtramp;
+extern unsigned long vdso32_sigtramp;
+extern unsigned long vdso32_rt_sigtramp;
+
+extern void vdso_init(void);
+
+#else /* __ASSEMBLY__ */
+
+#ifdef __VDSO64__
+#ifdef VDS64_HAS_DESCRIPTORS
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+        .section ".opd","a";		\
+        .align 3;			\
+	name:				\
+	.quad .name,.TOC.@tocbase,0;	\
+	.previous;			\
+	.globl .name;			\
+	.type .name,@function; 		\
+	.name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size .name,.-.name;
+
+#define V_LOCAL_FUNC(name) (.name)
+
+#else /* VDS64_HAS_DESCRIPTORS */
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* VDS64_HAS_DESCRIPTORS */
+#endif /* __VDSO64__ */
+
+#ifdef __VDSO32__
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	.type name,@function; 		\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* __VDSO32__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC64_VDSO_H__ */
diff --git a/include/asm-ppc64/vga.h b/include/asm-ppc64/vga.h
new file mode 100644
index 000000000000..c09849743f45
--- /dev/null
+++ b/include/asm-ppc64/vga.h
@@ -0,0 +1,50 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/io.h>
+
+#include <linux/config.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+    st_le16(addr, val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+    return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw	memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+#define VGA_MAP_MEM(x) ((unsigned long) ioremap((x), 0))
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif
diff --git a/include/asm-ppc64/vio.h b/include/asm-ppc64/vio.h
new file mode 100644
index 000000000000..20cd98ee6337
--- /dev/null
+++ b/include/asm-ppc64/vio.h
@@ -0,0 +1,103 @@
+/*
+ * IBM PowerPC Virtual I/O Infrastructure Support.
+ *
+ *    Copyright (c) 2003 IBM Corp.
+ *     Dave Engebretsen engebret@us.ibm.com
+ *     Santiago Leon santil@us.ibm.com
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VIO_H
+#define _ASM_VIO_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/hvcall.h>
+#include <asm/prom.h>
+#include <asm/scatterlist.h>
+/* 
+ * Architecture-specific constants for drivers to
+ * extract attributes of the device using vio_get_attribute()
+*/
+#define VETH_MAC_ADDR "local-mac-address"
+#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
+
+/* End architecture-specific constants */
+
+#define h_vio_signal(ua, mode) \
+  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
+
+#define VIO_IRQ_DISABLE		0UL
+#define VIO_IRQ_ENABLE		1UL
+
+struct vio_dev;
+struct vio_driver;
+struct vio_device_id;
+struct iommu_table;
+
+int vio_register_driver(struct vio_driver *drv);
+void vio_unregister_driver(struct vio_driver *drv);
+
+#ifdef CONFIG_PPC_PSERIES
+struct vio_dev * __devinit vio_register_device_node(
+		struct device_node *node_vdev);
+#endif
+void __devinit vio_unregister_device(struct vio_dev *dev);
+struct vio_dev *vio_find_node(struct device_node *vnode);
+
+const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length);
+int vio_get_irq(struct vio_dev *dev);
+int vio_enable_interrupts(struct vio_dev *dev);
+int vio_disable_interrupts(struct vio_dev *dev);
+
+extern struct dma_mapping_ops vio_dma_ops;
+
+extern struct bus_type vio_bus_type;
+
+struct vio_device_id {
+	char *type;
+	char *compat;
+};
+
+struct vio_driver {
+	struct list_head node;
+	char *name;
+	const struct vio_device_id *id_table;	/* NULL if wants all devices */
+	int  (*probe)  (struct vio_dev *dev, const struct vio_device_id *id);	/* New device inserted */
+	int (*remove) (struct vio_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
+	unsigned long driver_data;
+
+	struct device_driver driver;
+};
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+/*
+ * The vio_dev structure is used to describe virtual I/O devices.
+ */
+struct vio_dev {
+	struct iommu_table *iommu_table;     /* vio_map_* uses this */
+	char *name;
+	char *type;
+	uint32_t unit_address;	
+	unsigned int irq;
+
+	struct device dev;
+};
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+#endif /* _ASM_VIO_H */
diff --git a/include/asm-ppc64/xics.h b/include/asm-ppc64/xics.h
new file mode 100644
index 000000000000..0027da4364ac
--- /dev/null
+++ b/include/asm-ppc64/xics.h
@@ -0,0 +1,36 @@
+/* 
+ * arch/ppc64/kernel/xics.h
+ *
+ * Copyright 2000 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_KERNEL_XICS_H
+#define _PPC64_KERNEL_XICS_H
+
+#include <linux/cache.h>
+
+void xics_init_IRQ(void);
+int xics_get_irq(struct pt_regs *);
+void xics_setup_cpu(void);
+void xics_cause_IPI(int cpu);
+void xics_request_IPIs(void);
+void xics_migrate_irqs_away(void);
+
+/* first argument is ignored for now*/
+void pSeriesLP_cppr_info(int n_cpu, u8 value);
+
+struct xics_ipi_struct {
+	volatile unsigned long value;
+} ____cacheline_aligned;
+
+extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+
+extern unsigned int default_distrib_server;
+extern unsigned int interrupt_server_size;
+
+#endif /* _PPC64_KERNEL_XICS_H */
diff --git a/include/asm-ppc64/xor.h b/include/asm-ppc64/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-ppc64/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-s390/a.out.h b/include/asm-s390/a.out.h
new file mode 100644
index 000000000000..72adee6ef338
--- /dev/null
+++ b/include/asm-s390/a.out.h
@@ -0,0 +1,38 @@
+/*
+ *  include/asm-s390/a.out.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/a.out.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ * I don't think we'll ever need a.out ...
+ */
+
+#ifndef __S390_A_OUT_H__
+#define __S390_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-s390/atomic.h b/include/asm-s390/atomic.h
new file mode 100644
index 000000000000..d5a05cf47168
--- /dev/null
+++ b/include/asm-s390/atomic.h
@@ -0,0 +1,207 @@
+#ifndef __ARCH_S390_ATOMIC__
+#define __ARCH_S390_ATOMIC__
+
+/*
+ *  include/asm-s390/atomic.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999-2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow,
+ *		 Arnd Bergmann (arndb@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
+ */
+
+typedef struct {
+	volatile int counter;
+} __attribute__ ((aligned (4))) atomic_t;
+#define ATOMIC_INIT(i)  { (i) }
+
+#ifdef __KERNEL__
+
+#define __CS_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+        __asm__ __volatile__("   l     %0,0(%3)\n"			\
+                             "0: lr    %1,%0\n"				\
+                             op_string "  %1,%4\n"			\
+                             "   cs    %0,%1,0(%3)\n"			\
+                             "   jl    0b"				\
+                             : "=&d" (old_val), "=&d" (new_val),	\
+			       "=m" (((atomic_t *)(ptr))->counter)	\
+			     : "a" (ptr), "d" (op_val),			\
+			       "m" (((atomic_t *)(ptr))->counter)	\
+			     : "cc", "memory" );			\
+	new_val;							\
+})
+#define atomic_read(v)          ((v)->counter)
+#define atomic_set(v,i)         (((v)->counter) = (i))
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	       __CS_LOOP(v, i, "ar");
+}
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "ar");
+}
+static __inline__ int atomic_add_negative(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "ar") < 0;
+}
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	       __CS_LOOP(v, i, "sr");
+}
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "sr");
+}
+static __inline__ void atomic_inc(volatile atomic_t * v)
+{
+	       __CS_LOOP(v, 1, "ar");
+}
+static __inline__ int atomic_inc_return(volatile atomic_t * v)
+{
+	return __CS_LOOP(v, 1, "ar");
+}
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t * v)
+{
+	return __CS_LOOP(v, 1, "ar") == 0;
+}
+static __inline__ void atomic_dec(volatile atomic_t * v)
+{
+	       __CS_LOOP(v, 1, "sr");
+}
+static __inline__ int atomic_dec_return(volatile atomic_t * v)
+{
+	return __CS_LOOP(v, 1, "sr");
+}
+static __inline__ int atomic_dec_and_test(volatile atomic_t * v)
+{
+	return __CS_LOOP(v, 1, "sr") == 0;
+}
+static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, ~mask, "nr");
+}
+static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, mask, "or");
+}
+#undef __CS_LOOP
+
+#ifdef __s390x__
+typedef struct {
+	volatile long long counter;
+} __attribute__ ((aligned (8))) atomic64_t;
+#define ATOMIC64_INIT(i)  { (i) }
+
+#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+        __asm__ __volatile__("   lg    %0,0(%3)\n"			\
+                             "0: lgr   %1,%0\n"				\
+                             op_string "  %1,%4\n"			\
+                             "   csg   %0,%1,0(%3)\n"			\
+                             "   jl    0b"				\
+                             : "=&d" (old_val), "=&d" (new_val),	\
+			       "=m" (((atomic_t *)(ptr))->counter)	\
+			     : "a" (ptr), "d" (op_val),			\
+			       "m" (((atomic_t *)(ptr))->counter)	\
+			     : "cc", "memory" );			\
+	new_val;							\
+})
+#define atomic64_read(v)          ((v)->counter)
+#define atomic64_set(v,i)         (((v)->counter) = (i))
+
+static __inline__ void atomic64_add(int i, atomic64_t * v)
+{
+	       __CSG_LOOP(v, i, "agr");
+}
+static __inline__ long long atomic64_add_return(int i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "agr");
+}
+static __inline__ long long atomic64_add_negative(int i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "agr") < 0;
+}
+static __inline__ void atomic64_sub(int i, atomic64_t * v)
+{
+	       __CSG_LOOP(v, i, "sgr");
+}
+static __inline__ void atomic64_inc(volatile atomic64_t * v)
+{
+	       __CSG_LOOP(v, 1, "agr");
+}
+static __inline__ long long atomic64_inc_return(volatile atomic64_t * v)
+{
+	return __CSG_LOOP(v, 1, "agr");
+}
+static __inline__ long long atomic64_inc_and_test(volatile atomic64_t * v)
+{
+	return __CSG_LOOP(v, 1, "agr") == 0;
+}
+static __inline__ void atomic64_dec(volatile atomic64_t * v)
+{
+	       __CSG_LOOP(v, 1, "sgr");
+}
+static __inline__ long long atomic64_dec_return(volatile atomic64_t * v)
+{
+	return __CSG_LOOP(v, 1, "sgr");
+}
+static __inline__ long long atomic64_dec_and_test(volatile atomic64_t * v)
+{
+	return __CSG_LOOP(v, 1, "sgr") == 0;
+}
+static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, ~mask, "ngr");
+}
+static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, mask, "ogr");
+}
+
+#undef __CSG_LOOP
+#endif
+
+/*
+  returns 0  if expected_oldval==value in *v ( swap was successful )
+  returns 1  if unsuccessful.
+
+  This is non-portable, use bitops or spinlocks instead!
+*/
+static __inline__ int
+atomic_compare_and_swap(int expected_oldval,int new_val,atomic_t *v)
+{
+        int retval;
+
+        __asm__ __volatile__(
+                "  lr   %0,%3\n"
+                "  cs   %0,%4,0(%2)\n"
+                "  ipm  %0\n"
+                "  srl  %0,28\n"
+                "0:"
+                : "=&d" (retval), "=m" (v->counter)
+                : "a" (v), "d" (expected_oldval) , "d" (new_val),
+		  "m" (v->counter) : "cc", "memory" );
+        return retval;
+}
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#endif /* __KERNEL__ */
+#endif /* __ARCH_S390_ATOMIC__  */
diff --git a/include/asm-s390/bitops.h b/include/asm-s390/bitops.h
new file mode 100644
index 000000000000..16bb08499c7f
--- /dev/null
+++ b/include/asm-s390/bitops.h
@@ -0,0 +1,1188 @@
+#ifndef _S390_BITOPS_H
+#define _S390_BITOPS_H
+
+/*
+ *  include/asm-s390/bitops.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+#include <linux/config.h>
+#include <linux/compiler.h>
+
+/*
+ * 32 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
+ * bit 32 is the LSB of *(addr+4). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ *
+ * 64 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
+ * bit 64 is the LSB of *(addr+8). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
+ *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
+ *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
+ *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ */
+
+/* set ALIGN_CS to 1 if the SMP safe bit operations should
+ * align the address to 4 byte boundary. It seems to work
+ * without the alignment. 
+ */
+#ifdef __KERNEL__
+#define ALIGN_CS 0
+#else
+#define ALIGN_CS 1
+#ifndef CONFIG_SMP
+#error "bitops won't work without CONFIG_SMP"
+#endif
+#endif
+
+/* bitmap tables from arch/S390/kernel/bitmap.S */
+extern const char _oi_bitmap[];
+extern const char _ni_bitmap[];
+extern const char _zb_findmap[];
+extern const char _sb_findmap[];
+
+#ifndef __s390x__
+
+#define __BITOPS_ALIGN		3
+#define __BITOPS_WORDSIZE	32
+#define __BITOPS_OR		"or"
+#define __BITOPS_AND		"nr"
+#define __BITOPS_XOR		"xr"
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)		\
+	__asm__ __volatile__("   l   %0,0(%4)\n"			\
+			     "0: lr  %1,%0\n"				\
+			     __op_string "  %1,%3\n"			\
+			     "   cs  %0,%1,0(%4)\n"			\
+			     "   jl  0b"				\
+			     : "=&d" (__old), "=&d" (__new),	       	\
+			       "=m" (*(unsigned long *) __addr)		\
+			     : "d" (__val), "a" (__addr),		\
+			       "m" (*(unsigned long *) __addr) : "cc" );
+
+#else /* __s390x__ */
+
+#define __BITOPS_ALIGN		7
+#define __BITOPS_WORDSIZE	64
+#define __BITOPS_OR		"ogr"
+#define __BITOPS_AND		"ngr"
+#define __BITOPS_XOR		"xgr"
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)		\
+	__asm__ __volatile__("   lg  %0,0(%4)\n"			\
+			     "0: lgr %1,%0\n"				\
+			     __op_string "  %1,%3\n"			\
+			     "   csg %0,%1,0(%4)\n"			\
+			     "   jl  0b"				\
+			     : "=&d" (__old), "=&d" (__new),	       	\
+			       "=m" (*(unsigned long *) __addr)		\
+			     : "d" (__val), "a" (__addr),		\
+			       "m" (*(unsigned long *) __addr) : "cc" );
+
+#endif /* __s390x__ */
+
+#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
+#define __BITOPS_BARRIER() __asm__ __volatile__ ( "" : : : "memory" )
+
+#ifdef CONFIG_SMP
+/*
+ * SMP safe set_bit routine based on compare and swap (CS)
+ */
+static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+}
+
+/*
+ * SMP safe clear_bit routine based on compare and swap (CS)
+ */
+static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+}
+
+/*
+ * SMP safe change_bit routine based on compare and swap (CS)
+ */
+static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+}
+
+/*
+ * SMP safe test_and_set_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+
+/*
+ * SMP safe test_and_clear_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND/test mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_BARRIER();
+	return (old ^ new) != 0;
+}
+
+/*
+ * SMP safe test_and_change_bit routine based on compare and swap (CS) 
+ */
+static inline int
+test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+#if ALIGN_CS == 1
+	nr += (addr & __BITOPS_ALIGN) << 3;  /* add alignment to bit number */
+	addr ^= addr & __BITOPS_ALIGN;	     /* align address to 8 */
+#endif
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * fast, non-SMP set_bit routine
+ */
+static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+        asm volatile("oc 0(1,%1),0(%2)"
+		     : "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	switch (nr&7) {
+	case 0:
+		asm volatile ("oi 0(%1),0x01" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 1:
+		asm volatile ("oi 0(%1),0x02" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 2:
+		asm volatile ("oi 0(%1),0x04" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 3:
+		asm volatile ("oi 0(%1),0x08" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 4:
+		asm volatile ("oi 0(%1),0x10" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 5:
+		asm volatile ("oi 0(%1),0x20" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 6:
+		asm volatile ("oi 0(%1),0x40" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 7:
+		asm volatile ("oi 0(%1),0x80" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	}
+}
+
+#define set_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_set_bit((nr),(addr)) : \
+ __set_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP clear_bit routine
+ */
+static inline void 
+__clear_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+        asm volatile("nc 0(1,%1),0(%2)"
+		     : "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_ni_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	switch (nr&7) {
+	case 0:
+		asm volatile ("ni 0(%1),0xFE" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 1:
+		asm volatile ("ni 0(%1),0xFD": "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 2:
+		asm volatile ("ni 0(%1),0xFB" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 3:
+		asm volatile ("ni 0(%1),0xF7" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 4:
+		asm volatile ("ni 0(%1),0xEF" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 5:
+		asm volatile ("ni 0(%1),0xDF" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 6:
+		asm volatile ("ni 0(%1),0xBF" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 7:
+		asm volatile ("ni 0(%1),0x7F" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	}
+}
+
+#define clear_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_clear_bit((nr),(addr)) : \
+ __clear_bit((nr),(addr)) )
+
+/* 
+ * fast, non-SMP change_bit routine 
+ */
+static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+        asm volatile("xc 0(1,%1),0(%2)"
+		     :  "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	switch (nr&7) {
+	case 0:
+		asm volatile ("xi 0(%1),0x01" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 1:
+		asm volatile ("xi 0(%1),0x02" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 2:
+		asm volatile ("xi 0(%1),0x04" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 3:
+		asm volatile ("xi 0(%1),0x08" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 4:
+		asm volatile ("xi 0(%1),0x10" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 5:
+		asm volatile ("xi 0(%1),0x20" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 6:
+		asm volatile ("xi 0(%1),0x40" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	case 7:
+		asm volatile ("xi 0(%1),0x80" : "=m" (*(char *) addr)
+			      : "a" (addr), "m" (*(char *) addr) : "cc" );
+		break;
+	}
+}
+
+#define change_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_change_bit((nr),(addr)) : \
+ __change_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP test_and_set_bit routine
+ */
+static inline int
+test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+        asm volatile("oc 0(1,%1),0(%2)"
+		     : "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc", "memory" );
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_clear_bit routine
+ */
+static inline int
+test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+        asm volatile("nc 0(1,%1),0(%2)"
+		     : "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_ni_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc", "memory" );
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_change_bit routine
+ */
+static inline int
+test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+        asm volatile("xc 0(1,%1),0(%2)"
+		     : "=m" (*(char *) addr)
+		     : "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		       "m" (*(char *) addr) : "cc", "memory" );
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
+
+#ifdef CONFIG_SMP
+#define set_bit             set_bit_cs
+#define clear_bit           clear_bit_cs
+#define change_bit          change_bit_cs
+#define test_and_set_bit    test_and_set_bit_cs
+#define test_and_clear_bit  test_and_clear_bit_cs
+#define test_and_change_bit test_and_change_bit_cs
+#else
+#define set_bit             set_bit_simple
+#define clear_bit           clear_bit_simple
+#define change_bit          change_bit_simple
+#define test_and_set_bit    test_and_set_bit_simple
+#define test_and_clear_bit  test_and_clear_bit_simple
+#define test_and_change_bit test_and_change_bit_simple
+#endif
+
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+
+static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(volatile unsigned char *) addr;
+	return (ch >> (nr & 7)) & 1;
+}
+
+static inline int 
+__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
+    return (((volatile char *) addr)
+	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7)));
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)) )
+
+#ifndef __s390x__
+
+/*
+ * Find-bit routines..
+ */
+static inline int
+find_first_zero_bit(const unsigned long * addr, unsigned int size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long cmp, count;
+        unsigned int res;
+
+        if (!size)
+                return 0;
+        __asm__("   lhi  %1,-1\n"
+                "   lr   %2,%3\n"
+                "   slr  %0,%0\n"
+                "   ahi  %2,31\n"
+                "   srl  %2,5\n"
+                "0: c    %1,0(%0,%4)\n"
+                "   jne  1f\n"
+                "   ahi  %0,4\n"
+                "   brct %2,0b\n"
+                "   lr   %0,%3\n"
+                "   j    4f\n"
+                "1: l    %2,0(%0,%4)\n"
+                "   sll  %0,3\n"
+                "   lhi  %1,0xff\n"
+                "   tml  %2,0xffff\n"
+                "   jno  2f\n"
+                "   ahi  %0,16\n"
+                "   srl  %2,16\n"
+                "2: tml  %2,0x00ff\n"
+                "   jno  3f\n"
+                "   ahi  %0,8\n"
+                "   srl  %2,8\n"
+                "3: nr   %2,%1\n"
+                "   ic   %2,0(%2,%5)\n"
+                "   alr  %0,%2\n"
+                "4:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+                : "a" (size), "a" (addr), "a" (&_zb_findmap),
+		  "m" (*(addrtype *) addr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline int
+find_first_bit(const unsigned long * addr, unsigned int size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long cmp, count;
+        unsigned int res;
+
+        if (!size)
+                return 0;
+        __asm__("   slr  %1,%1\n"
+                "   lr   %2,%3\n"
+                "   slr  %0,%0\n"
+                "   ahi  %2,31\n"
+                "   srl  %2,5\n"
+                "0: c    %1,0(%0,%4)\n"
+                "   jne  1f\n"
+                "   ahi  %0,4\n"
+                "   brct %2,0b\n"
+                "   lr   %0,%3\n"
+                "   j    4f\n"
+                "1: l    %2,0(%0,%4)\n"
+                "   sll  %0,3\n"
+                "   lhi  %1,0xff\n"
+                "   tml  %2,0xffff\n"
+                "   jnz  2f\n"
+                "   ahi  %0,16\n"
+                "   srl  %2,16\n"
+                "2: tml  %2,0x00ff\n"
+                "   jnz  3f\n"
+                "   ahi  %0,8\n"
+                "   srl  %2,8\n"
+                "3: nr   %2,%1\n"
+                "   ic   %2,0(%2,%5)\n"
+                "   alr  %0,%2\n"
+                "4:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+                : "a" (size), "a" (addr), "a" (&_sb_findmap),
+		  "m" (*(addrtype *) addr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline int
+find_next_zero_bit (const unsigned long * addr, int size, int offset)
+{
+        unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
+        unsigned long bitvec, reg;
+        int set, bit = offset & 31, res;
+
+        if (bit) {
+                /*
+                 * Look for zero in first word
+                 */
+                bitvec = (*p) >> bit;
+                __asm__("   slr  %0,%0\n"
+                        "   lhi  %2,0xff\n"
+                        "   tml  %1,0xffff\n"
+                        "   jno  0f\n"
+                        "   ahi  %0,16\n"
+                        "   srl  %1,16\n"
+                        "0: tml  %1,0x00ff\n"
+                        "   jno  1f\n"
+                        "   ahi  %0,8\n"
+                        "   srl  %1,8\n"
+                        "1: nr   %1,%2\n"
+                        "   ic   %1,0(%1,%3)\n"
+                        "   alr  %0,%1"
+                        : "=&d" (set), "+a" (bitvec), "=&d" (reg)
+                        : "a" (&_zb_findmap) : "cc" );
+                if (set < (32 - bit))
+                        return set + offset;
+                offset += 32 - bit;
+                p++;
+        }
+        /*
+         * No zero yet, search remaining full words for a zero
+         */
+        res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
+        return (offset + res);
+}
+
+static inline int
+find_next_bit (const unsigned long * addr, int size, int offset)
+{
+        unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
+        unsigned long bitvec, reg;
+        int set, bit = offset & 31, res;
+
+        if (bit) {
+                /*
+                 * Look for set bit in first word
+                 */
+                bitvec = (*p) >> bit;
+                __asm__("   slr  %0,%0\n"
+                        "   lhi  %2,0xff\n"
+                        "   tml  %1,0xffff\n"
+                        "   jnz  0f\n"
+                        "   ahi  %0,16\n"
+                        "   srl  %1,16\n"
+                        "0: tml  %1,0x00ff\n"
+                        "   jnz  1f\n"
+                        "   ahi  %0,8\n"
+                        "   srl  %1,8\n"
+                        "1: nr   %1,%2\n"
+                        "   ic   %1,0(%1,%3)\n"
+                        "   alr  %0,%1"
+                        : "=&d" (set), "+a" (bitvec), "=&d" (reg)
+                        : "a" (&_sb_findmap) : "cc" );
+                if (set < (32 - bit))
+                        return set + offset;
+                offset += 32 - bit;
+                p++;
+        }
+        /*
+         * No set bit yet, search remaining full words for a bit
+         */
+        res = find_first_bit (p, size - 32 * (p - (unsigned long *) addr));
+        return (offset + res);
+}
+
+#else /* __s390x__ */
+
+/*
+ * Find-bit routines..
+ */
+static inline unsigned long
+find_first_zero_bit(const unsigned long * addr, unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+        unsigned long res, cmp, count;
+
+        if (!size)
+                return 0;
+        __asm__("   lghi  %1,-1\n"
+                "   lgr   %2,%3\n"
+                "   slgr  %0,%0\n"
+                "   aghi  %2,63\n"
+                "   srlg  %2,%2,6\n"
+                "0: cg    %1,0(%0,%4)\n"
+                "   jne   1f\n"
+                "   aghi  %0,8\n"
+                "   brct  %2,0b\n"
+                "   lgr   %0,%3\n"
+                "   j     5f\n"
+                "1: lg    %2,0(%0,%4)\n"
+                "   sllg  %0,%0,3\n"
+                "   clr   %2,%1\n"
+		"   jne   2f\n"
+		"   aghi  %0,32\n"
+                "   srlg  %2,%2,32\n"
+		"2: lghi  %1,0xff\n"
+                "   tmll  %2,0xffff\n"
+                "   jno   3f\n"
+                "   aghi  %0,16\n"
+                "   srl   %2,16\n"
+                "3: tmll  %2,0x00ff\n"
+                "   jno   4f\n"
+                "   aghi  %0,8\n"
+                "   srl   %2,8\n"
+                "4: ngr   %2,%1\n"
+                "   ic    %2,0(%2,%5)\n"
+                "   algr  %0,%2\n"
+                "5:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+		: "a" (size), "a" (addr), "a" (&_zb_findmap),
+		  "m" (*(addrtype *) addr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline unsigned long
+find_first_bit(const unsigned long * addr, unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+        unsigned long res, cmp, count;
+
+        if (!size)
+                return 0;
+        __asm__("   slgr  %1,%1\n"
+                "   lgr   %2,%3\n"
+                "   slgr  %0,%0\n"
+                "   aghi  %2,63\n"
+                "   srlg  %2,%2,6\n"
+                "0: cg    %1,0(%0,%4)\n"
+                "   jne   1f\n"
+                "   aghi  %0,8\n"
+                "   brct  %2,0b\n"
+                "   lgr   %0,%3\n"
+                "   j     5f\n"
+                "1: lg    %2,0(%0,%4)\n"
+                "   sllg  %0,%0,3\n"
+                "   clr   %2,%1\n"
+		"   jne   2f\n"
+		"   aghi  %0,32\n"
+                "   srlg  %2,%2,32\n"
+		"2: lghi  %1,0xff\n"
+                "   tmll  %2,0xffff\n"
+                "   jnz   3f\n"
+                "   aghi  %0,16\n"
+                "   srl   %2,16\n"
+                "3: tmll  %2,0x00ff\n"
+                "   jnz   4f\n"
+                "   aghi  %0,8\n"
+                "   srl   %2,8\n"
+                "4: ngr   %2,%1\n"
+                "   ic    %2,0(%2,%5)\n"
+                "   algr  %0,%2\n"
+                "5:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+		: "a" (size), "a" (addr), "a" (&_sb_findmap),
+		  "m" (*(addrtype *) addr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline unsigned long
+find_next_zero_bit (const unsigned long * addr, unsigned long size, unsigned long offset)
+{
+        unsigned long * p = ((unsigned long *) addr) + (offset >> 6);
+        unsigned long bitvec, reg;
+        unsigned long set, bit = offset & 63, res;
+
+        if (bit) {
+                /*
+                 * Look for zero in first word
+                 */
+                bitvec = (*p) >> bit;
+                __asm__("   lhi  %2,-1\n"
+                        "   slgr %0,%0\n"
+                        "   clr  %1,%2\n"
+                        "   jne  0f\n"
+                        "   aghi %0,32\n"
+                        "   srlg %1,%1,32\n"
+			"0: lghi %2,0xff\n"
+                        "   tmll %1,0xffff\n"
+                        "   jno  1f\n"
+                        "   aghi %0,16\n"
+                        "   srlg %1,%1,16\n"
+                        "1: tmll %1,0x00ff\n"
+                        "   jno  2f\n"
+                        "   aghi %0,8\n"
+                        "   srlg %1,%1,8\n"
+                        "2: ngr  %1,%2\n"
+                        "   ic   %1,0(%1,%3)\n"
+                        "   algr %0,%1"
+                        : "=&d" (set), "+a" (bitvec), "=&d" (reg)
+                        : "a" (&_zb_findmap) : "cc" );
+                if (set < (64 - bit))
+                        return set + offset;
+                offset += 64 - bit;
+                p++;
+        }
+        /*
+         * No zero yet, search remaining full words for a zero
+         */
+        res = find_first_zero_bit (p, size - 64 * (p - (unsigned long *) addr));
+        return (offset + res);
+}
+
+static inline unsigned long
+find_next_bit (const unsigned long * addr, unsigned long size, unsigned long offset)
+{
+        unsigned long * p = ((unsigned long *) addr) + (offset >> 6);
+        unsigned long bitvec, reg;
+        unsigned long set, bit = offset & 63, res;
+
+        if (bit) {
+                /*
+                 * Look for zero in first word
+                 */
+                bitvec = (*p) >> bit;
+                __asm__("   slgr %0,%0\n"
+                        "   ltr  %1,%1\n"
+                        "   jnz  0f\n"
+                        "   aghi %0,32\n"
+                        "   srlg %1,%1,32\n"
+			"0: lghi %2,0xff\n"
+                        "   tmll %1,0xffff\n"
+                        "   jnz  1f\n"
+                        "   aghi %0,16\n"
+                        "   srlg %1,%1,16\n"
+                        "1: tmll %1,0x00ff\n"
+                        "   jnz  2f\n"
+                        "   aghi %0,8\n"
+                        "   srlg %1,%1,8\n"
+                        "2: ngr  %1,%2\n"
+                        "   ic   %1,0(%1,%3)\n"
+                        "   algr %0,%1"
+                        : "=&d" (set), "+a" (bitvec), "=&d" (reg)
+                        : "a" (&_sb_findmap) : "cc" );
+                if (set < (64 - bit))
+                        return set + offset;
+                offset += 64 - bit;
+                p++;
+        }
+        /*
+         * No set bit yet, search remaining full words for a bit
+         */
+        res = find_first_bit (p, size - 64 * (p - (unsigned long *) addr));
+        return (offset + res);
+}
+
+#endif /* __s390x__ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+        unsigned long bit = 0;
+
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0xffffffff)) {
+		word >>= 32;
+		bit += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0xffff)) {
+		word >>= 16;
+		bit += 16;
+	}
+	if (likely((word & 0xff) == 0xff)) {
+		word >>= 8;
+		bit += 8;
+	}
+	return bit + _zb_findmap[word & 0xff];
+}
+
+/*
+ * __ffs = find first bit in word. Undefined if no bit exists,
+ * so code should check against 0UL first..
+ */
+static inline unsigned long __ffs (unsigned long word)
+{
+	unsigned long bit = 0;
+
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0)) {
+		word >>= 32;
+		bit += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0)) {
+		word >>= 16;
+		bit += 16;
+	}
+	if (likely((word & 0xff) == 0)) {
+		word >>= 8;
+		bit += 8;
+	}
+	return bit + _sb_findmap[word & 0xff];
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	return find_first_bit(b, 140);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+#define ffs(x) generic_ffs(x)
+
+/*
+ * fls: find last bit set.
+ */
+#define fls(x) generic_fls(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight64(x)						\
+({								\
+	unsigned long __x = (x);				\
+	unsigned int __w;					\
+	__w = generic_hweight32((unsigned int) __x);		\
+	__w += generic_hweight32((unsigned int) (__x>>32));	\
+	__w;							\
+})
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+
+#ifdef __KERNEL__
+
+/*
+ * ATTENTION: intel byte ordering convention for ext2 and minix !!
+ * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
+ * bit 32 is the LSB of (addr+4).
+ * That combined with the little endian byte order of Intel gives the
+ * following bit order in memory:
+ *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
+ *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+ */
+
+#define ext2_set_bit(nr, addr)       \
+	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_set_bit_atomic(lock, nr, addr)       \
+	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)     \
+	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr)     \
+	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_test_bit(nr, addr)      \
+	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+
+#ifndef __s390x__
+
+static inline int 
+ext2_find_first_zero_bit(void *vaddr, unsigned int size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long cmp, count;
+        unsigned int res;
+
+        if (!size)
+                return 0;
+        __asm__("   lhi  %1,-1\n"
+                "   lr   %2,%3\n"
+                "   ahi  %2,31\n"
+                "   srl  %2,5\n"
+                "   slr  %0,%0\n"
+                "0: cl   %1,0(%0,%4)\n"
+                "   jne  1f\n"
+                "   ahi  %0,4\n"
+                "   brct %2,0b\n"
+                "   lr   %0,%3\n"
+                "   j    4f\n"
+                "1: l    %2,0(%0,%4)\n"
+                "   sll  %0,3\n"
+                "   ahi  %0,24\n"
+                "   lhi  %1,0xff\n"
+                "   tmh  %2,0xffff\n"
+                "   jo   2f\n"
+                "   ahi  %0,-16\n"
+                "   srl  %2,16\n"
+                "2: tml  %2,0xff00\n"
+                "   jo   3f\n"
+                "   ahi  %0,-8\n"
+                "   srl  %2,8\n"
+                "3: nr   %2,%1\n"
+                "   ic   %2,0(%2,%5)\n"
+                "   alr  %0,%2\n"
+                "4:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+                : "a" (size), "a" (vaddr), "a" (&_zb_findmap),
+		  "m" (*(addrtype *) vaddr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline int 
+ext2_find_next_zero_bit(void *vaddr, unsigned int size, unsigned offset)
+{
+        unsigned long *addr = vaddr;
+        unsigned long *p = addr + (offset >> 5);
+        unsigned long word, reg;
+        unsigned int bit = offset & 31UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                __asm__("   ic   %0,0(%1)\n"
+                        "   icm  %0,2,1(%1)\n"
+                        "   icm  %0,4,2(%1)\n"
+                        "   icm  %0,8,3(%1)"
+                        : "=&a" (word) : "a" (p) : "cc" );
+		word >>= bit;
+                res = bit;
+                /* Look for zero in first longword */
+                __asm__("   lhi  %2,0xff\n"
+                        "   tml  %1,0xffff\n"
+                	"   jno  0f\n"
+                	"   ahi  %0,16\n"
+                	"   srl  %1,16\n"
+                	"0: tml  %1,0x00ff\n"
+                	"   jno  1f\n"
+                	"   ahi  %0,8\n"
+                	"   srl  %1,8\n"
+                	"1: nr   %1,%2\n"
+                	"   ic   %1,0(%1,%3)\n"
+                	"   alr  %0,%1"
+                	: "+&d" (res), "+&a" (word), "=&d" (reg)
+                  	: "a" (&_zb_findmap) : "cc" );
+                if (res < 32)
+			return (p - addr)*32 + res;
+                p++;
+        }
+        /* No zero yet, search remaining full bytes for a zero */
+        res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
+        return (p - addr) * 32 + res;
+}
+
+#else /* __s390x__ */
+
+static inline unsigned long
+ext2_find_first_zero_bit(void *vaddr, unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+        unsigned long res, cmp, count;
+
+        if (!size)
+                return 0;
+        __asm__("   lghi  %1,-1\n"
+                "   lgr   %2,%3\n"
+                "   aghi  %2,63\n"
+                "   srlg  %2,%2,6\n"
+                "   slgr  %0,%0\n"
+                "0: clg   %1,0(%0,%4)\n"
+                "   jne   1f\n"
+                "   aghi  %0,8\n"
+                "   brct  %2,0b\n"
+                "   lgr   %0,%3\n"
+                "   j     5f\n"
+                "1: cl    %1,0(%0,%4)\n"
+		"   jne   2f\n"
+		"   aghi  %0,4\n"
+		"2: l     %2,0(%0,%4)\n"
+                "   sllg  %0,%0,3\n"
+                "   aghi  %0,24\n"
+                "   lghi  %1,0xff\n"
+                "   tmlh  %2,0xffff\n"
+                "   jo    3f\n"
+                "   aghi  %0,-16\n"
+                "   srl   %2,16\n"
+                "3: tmll  %2,0xff00\n"
+                "   jo    4f\n"
+                "   aghi  %0,-8\n"
+                "   srl   %2,8\n"
+                "4: ngr   %2,%1\n"
+                "   ic    %2,0(%2,%5)\n"
+                "   algr  %0,%2\n"
+                "5:"
+                : "=&a" (res), "=&d" (cmp), "=&a" (count)
+		: "a" (size), "a" (vaddr), "a" (&_zb_findmap),
+		  "m" (*(addrtype *) vaddr) : "cc" );
+        return (res < size) ? res : size;
+}
+
+static inline unsigned long
+ext2_find_next_zero_bit(void *vaddr, unsigned long size, unsigned long offset)
+{
+        unsigned long *addr = vaddr;
+        unsigned long *p = addr + (offset >> 6);
+        unsigned long word, reg;
+        unsigned long bit = offset & 63UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                __asm__("   lrvg %0,%1" /* load reversed, neat instruction */
+                        : "=a" (word) : "m" (*p) );
+                word >>= bit;
+                res = bit;
+                /* Look for zero in first 8 byte word */
+                __asm__("   lghi %2,0xff\n"
+			"   tmll %1,0xffff\n"
+			"   jno  2f\n"
+			"   ahi  %0,16\n"
+			"   srlg %1,%1,16\n"
+                	"0: tmll %1,0xffff\n"
+                        "   jno  2f\n"
+                        "   ahi  %0,16\n"
+                        "   srlg %1,%1,16\n"
+                        "1: tmll %1,0xffff\n"
+                        "   jno  2f\n"
+                        "   ahi  %0,16\n"
+                        "   srl  %1,16\n"
+                        "2: tmll %1,0x00ff\n"
+                	"   jno  3f\n"
+                	"   ahi  %0,8\n"
+                	"   srl  %1,8\n"
+                	"3: ngr  %1,%2\n"
+                	"   ic   %1,0(%1,%3)\n"
+                	"   alr  %0,%1"
+                	: "+&d" (res), "+a" (word), "=&d" (reg)
+                  	: "a" (&_zb_findmap) : "cc" );
+                if (res < 64)
+			return (p - addr)*64 + res;
+                p++;
+        }
+        /* No zero yet, search remaining full bytes for a zero */
+        res = ext2_find_first_zero_bit (p, size - 64 * (p - addr));
+        return (p - addr) * 64 + res;
+}
+
+#endif /* __s390x__ */
+
+/* Bitmap functions for the minix filesystem.  */
+/* FIXME !!! */
+#define minix_test_and_set_bit(nr,addr) \
+	test_and_set_bit(nr,(unsigned long *)addr)
+#define minix_set_bit(nr,addr) \
+	set_bit(nr,(unsigned long *)addr)
+#define minix_test_and_clear_bit(nr,addr) \
+	test_and_clear_bit(nr,(unsigned long *)addr)
+#define minix_test_bit(nr,addr) \
+	test_bit(nr,(unsigned long *)addr)
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _S390_BITOPS_H */
diff --git a/include/asm-s390/bug.h b/include/asm-s390/bug.h
new file mode 100644
index 000000000000..2b8d6d4dffcf
--- /dev/null
+++ b/include/asm-s390/bug.h
@@ -0,0 +1,14 @@
+#ifndef _S390_BUG_H
+#define _S390_BUG_H
+
+#include <linux/kernel.h>
+
+#define BUG() do { \
+        printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+        __asm__ __volatile__(".long 0"); \
+} while (0)
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-s390/bugs.h b/include/asm-s390/bugs.h
new file mode 100644
index 000000000000..2c3659621314
--- /dev/null
+++ b/include/asm-s390/bugs.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/bugs.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bugs.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+
+static void __init check_bugs(void)
+{
+  /* s390 has no bugs ... */
+}
diff --git a/include/asm-s390/byteorder.h b/include/asm-s390/byteorder.h
new file mode 100644
index 000000000000..2cc35a0e188e
--- /dev/null
+++ b/include/asm-s390/byteorder.h
@@ -0,0 +1,131 @@
+#ifndef _S390_BYTEORDER_H
+#define _S390_BYTEORDER_H
+
+/*
+ *  include/asm-s390/byteorder.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef __s390x__
+static __inline__ __u64 ___arch__swab64p(const __u64 *x)
+{
+	__u64 result;
+
+	__asm__ __volatile__ (
+		"   lrvg %0,%1"
+		: "=d" (result) : "m" (*x) );
+	return result;
+}
+
+static __inline__ __u64 ___arch__swab64(__u64 x)
+{
+	__u64 result;
+
+	__asm__ __volatile__ (
+		"   lrvgr %0,%1"
+		: "=d" (result) : "d" (x) );
+	return result;
+}
+
+static __inline__ void ___arch__swab64s(__u64 *x)
+{
+	*x = ___arch__swab64p(x);
+}
+#endif /* __s390x__ */
+
+static __inline__ __u32 ___arch__swab32p(const __u32 *x)
+{
+	__u32 result;
+	
+	__asm__ __volatile__ (
+#ifndef __s390x__
+		"        icm   %0,8,3(%1)\n"
+		"        icm   %0,4,2(%1)\n"
+		"        icm   %0,2,1(%1)\n"
+		"        ic    %0,0(%1)"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc" );
+#else /* __s390x__ */
+		"   lrv  %0,%1"
+		: "=d" (result) : "m" (*x) );
+#endif /* __s390x__ */
+	return result;
+}
+
+static __inline__ __u32 ___arch__swab32(__u32 x)
+{
+#ifndef __s390x__
+	return ___arch__swab32p(&x);
+#else /* __s390x__ */
+	__u32 result;
+	
+	__asm__ __volatile__ (
+		"   lrvr  %0,%1"
+		: "=d" (result) : "d" (x) );
+	return result;
+#endif /* __s390x__ */
+}
+
+static __inline__ void ___arch__swab32s(__u32 *x)
+{
+	*x = ___arch__swab32p(x);
+}
+
+static __inline__ __u16 ___arch__swab16p(const __u16 *x)
+{
+	__u16 result;
+	
+	__asm__ __volatile__ (
+#ifndef __s390x__
+		"        icm   %0,2,1(%1)\n"
+		"        ic    %0,0(%1)\n"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc" );
+#else /* __s390x__ */
+		"   lrvh %0,%1"
+		: "=d" (result) : "m" (*x) );
+#endif /* __s390x__ */
+	return result;
+}
+
+static __inline__ __u16 ___arch__swab16(__u16 x)
+{
+	return ___arch__swab16p(&x);
+}
+
+static __inline__ void ___arch__swab16s(__u16 *x)
+{
+	*x = ___arch__swab16p(x);
+}
+
+#ifdef __s390x__
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+#define __arch__swab64s(x) ___arch__swab64s(x)
+#endif /* __s390x__ */
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32s(x) ___arch__swab32s(x)
+#define __arch__swab16s(x) ___arch__swab16s(x)
+
+#ifndef __s390x__
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+#else /* __s390x__ */
+#define __BYTEORDER_HAS_U64__
+#endif /* __s390x__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _S390_BYTEORDER_H */
diff --git a/include/asm-s390/cache.h b/include/asm-s390/cache.h
new file mode 100644
index 000000000000..29845378b206
--- /dev/null
+++ b/include/asm-s390/cache.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-s390/cache.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/cache.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef __ARCH_S390_CACHE_H
+#define __ARCH_S390_CACHE_H
+
+#define L1_CACHE_BYTES     256
+#define L1_CACHE_SHIFT     8
+#define L1_CACHE_SHIFT_MAX 8	/* largest L1 which this arch supports */
+
+#define ARCH_KMALLOC_MINALIGN	8
+
+#endif
diff --git a/include/asm-s390/cacheflush.h b/include/asm-s390/cacheflush.h
new file mode 100644
index 000000000000..e399a8ba2ed7
--- /dev/null
+++ b/include/asm-s390/cacheflush.h
@@ -0,0 +1,26 @@
+#ifndef _S390_CACHEFLUSH_H
+#define _S390_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the s390. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _S390_CACHEFLUSH_H */
diff --git a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h
new file mode 100644
index 000000000000..3eb231af5d51
--- /dev/null
+++ b/include/asm-s390/ccwdev.h
@@ -0,0 +1,192 @@
+/*
+ *  include/asm-s390/ccwdev.h
+ *  include/asm-s390x/ccwdev.h
+ *
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ *
+ *  Interface for CCW device drivers
+ */
+#ifndef _S390_CCWDEV_H_
+#define _S390_CCWDEV_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+/* structs from asm/cio.h */
+struct irb;
+struct ccw1;
+
+/* simplified initializers for struct ccw_device:
+ * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
+ * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */
+#define CCW_DEVICE(cu, cum) 						\
+	.cu_type=(cu), .cu_model=(cum),					\
+	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0))
+
+#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\
+	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\
+	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\
+		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\
+		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0)
+
+/* scan through an array of device ids and return the first
+ * entry that matches the device.
+ *
+ * the array must end with an entry containing zero match_flags
+ */
+static inline const struct ccw_device_id *
+ccw_device_id_match(const struct ccw_device_id *array,
+			const struct ccw_device_id *match)
+{
+	const struct ccw_device_id *id = array;
+
+	for (id = array; id->match_flags; id++) {
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE)
+		    && (id->cu_type != match->cu_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL)
+		    && (id->cu_model != match->cu_model))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE)
+		    && (id->dev_type != match->dev_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL)
+		    && (id->dev_model != match->dev_model))
+			continue;
+
+		return id;
+	}
+
+	return 0;
+}
+
+/* The struct ccw device is our replacement for the globally accessible
+ * ioinfo array. ioinfo will mutate into a subchannel device later.
+ *
+ * Reference: Documentation/s390/driver-model.txt */
+struct ccw_device {
+	spinlock_t *ccwlock;
+	struct ccw_device_private *private;	/* cio private information */
+	struct ccw_device_id id;	/* id of this device, driver_info is
+					   set by ccw_find_driver */
+	struct ccw_driver *drv;		/* */
+	struct device dev;		/* */
+	int online;
+	/* This is sick, but a driver can have different interrupt handlers 
+	   for different ccw_devices (multi-subchannel drivers)... */
+	void (*handler) (struct ccw_device *, unsigned long, struct irb *);
+};
+
+
+/* Each ccw driver registers with the ccw root bus */
+struct ccw_driver {
+	struct module *owner;		/* for automatic MOD_INC_USE_COUNT   */
+	struct ccw_device_id *ids;	/* probe driver with these devs      */
+	int (*probe) (struct ccw_device *); /* ask driver to probe dev 	     */
+	void (*remove) (struct ccw_device *);
+					/* device is no longer available     */
+	int (*set_online) (struct ccw_device *);
+	int (*set_offline) (struct ccw_device *);
+	int (*notify) (struct ccw_device *, int);
+	struct device_driver driver;	/* higher level structure, don't init
+					   this from your driver	     */
+	char *name;
+};
+
+extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,
+					      const char *bus_id);
+
+/* devices drivers call these during module load and unload.
+ * When a driver is registered, its probe method is called
+ * when new devices for its type pop up */
+extern int  ccw_driver_register   (struct ccw_driver *driver);
+extern void ccw_driver_unregister (struct ccw_driver *driver);
+
+struct ccw1;
+
+extern int ccw_device_set_options(struct ccw_device *, unsigned long);
+
+/* Allow for i/o completion notification after primary interrupt status. */
+#define CCWDEV_EARLY_NOTIFICATION	0x0001
+/* Report all interrupt conditions. */
+#define CCWDEV_REPORT_ALL	 	0x0002
+/* Try to perform path grouping. */
+#define CCWDEV_DO_PATHGROUP             0x0004
+/* Allow forced onlining of boxed devices. */
+#define CCWDEV_ALLOW_FORCE              0x0008
+
+/*
+ * ccw_device_start()
+ *
+ *  Start a S/390 channel program. When the interrupt arrives, the
+ *  IRQ handler is called, either immediately, delayed (dev-end missing,
+ *  or sense required) or never (no IRQ handler registered).
+ *  Depending on the action taken, ccw_device_start() returns:  
+ *                           0	     - Success
+ *			     -EBUSY  - Device busy, or status pending
+ *			     -ENODEV - Device not operational
+ *                           -EINVAL - Device invalid for operation
+ */
+extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
+			    unsigned long, __u8, unsigned long);
+/*
+ * ccw_device_start_timeout()
+ *
+ * This function notifies the device driver if the channel program has not
+ * completed during the specified time. If a timeout occurs, the channel
+ * program is terminated via xsch(), hsch() or csch().
+ */
+extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *,
+				    unsigned long, __u8, unsigned long, int);
+/*
+ * ccw_device_start_key()
+ * ccw_device_start_key_timeout()
+ *
+ * Same as ccw_device_start() and ccw_device_start_timeout(), except a
+ * storage key != default key can be provided for the I/O.
+ */
+extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *,
+				unsigned long, __u8, __u8, unsigned long);
+extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *,
+					unsigned long, __u8, __u8,
+					unsigned long, int);
+
+
+extern int ccw_device_resume(struct ccw_device *);
+extern int ccw_device_halt(struct ccw_device *, unsigned long);
+extern int ccw_device_clear(struct ccw_device *, unsigned long);
+
+extern int read_dev_chars(struct ccw_device *cdev, void **buffer, int length);
+extern int read_conf_data(struct ccw_device *cdev, void **buffer, int *length);
+extern int read_conf_data_lpm(struct ccw_device *cdev, void **buffer,
+			      int *length, __u8 lpm);
+
+extern int ccw_device_set_online(struct ccw_device *cdev);
+extern int ccw_device_set_offline(struct ccw_device *cdev);
+
+
+extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
+extern __u8 ccw_device_get_path_mask(struct ccw_device *);
+
+#define get_ccwdev_lock(x) (x)->ccwlock
+
+#define to_ccwdev(n) container_of(n, struct ccw_device, dev)
+#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
+
+extern struct ccw_device *ccw_device_probe_console(void);
+
+// FIXME: these have to go
+extern int _ccw_device_get_device_number(struct ccw_device *);
+extern int _ccw_device_get_subchannel_number(struct ccw_device *);
+
+extern struct device *s390_root_dev_register(const char *);
+extern void s390_root_dev_unregister(struct device *);
+
+extern void *ccw_device_get_chp_desc(struct ccw_device *, int);
+#endif /* _S390_CCWDEV_H_ */
diff --git a/include/asm-s390/ccwgroup.h b/include/asm-s390/ccwgroup.h
new file mode 100644
index 000000000000..d2f9c0d53a97
--- /dev/null
+++ b/include/asm-s390/ccwgroup.h
@@ -0,0 +1,45 @@
+#ifndef S390_CCWGROUP_H
+#define S390_CCWGROUP_H
+
+struct ccw_device;
+struct ccw_driver;
+
+struct ccwgroup_device {
+	unsigned long creator_id;	/* unique number of the driver */
+	enum {
+		CCWGROUP_OFFLINE,
+		CCWGROUP_ONLINE,
+	} state;
+	atomic_t onoff;
+	unsigned int count;		/* number of attached slave devices */
+	struct device	dev;		/* master device		    */
+	struct ccw_device *cdev[0];	/* variable number, allocate as needed */
+};
+
+struct ccwgroup_driver {
+	struct module *owner;
+	char *name;
+	int max_slaves;
+	unsigned long driver_id;
+
+	int (*probe) (struct ccwgroup_device *);
+	void (*remove) (struct ccwgroup_device *);
+	int (*set_online) (struct ccwgroup_device *);
+	int (*set_offline) (struct ccwgroup_device *);
+
+	struct device_driver driver;		/* this driver */
+};
+
+extern int  ccwgroup_driver_register   (struct ccwgroup_driver *cdriver);
+extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver);
+extern int ccwgroup_create (struct device *root,
+			    unsigned int creator_id,
+			    struct ccw_driver *gdrv,
+			    int argc, char *argv[]);
+
+extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev);
+extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev);
+
+#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev)
+#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver)
+#endif
diff --git a/include/asm-s390/checksum.h b/include/asm-s390/checksum.h
new file mode 100644
index 000000000000..471f2af2b16a
--- /dev/null
+++ b/include/asm-s390/checksum.h
@@ -0,0 +1,264 @@
+#ifndef _S390_CHECKSUM_H
+#define _S390_CHECKSUM_H
+
+/*
+ *  include/asm-s390/checksum.h
+ *    S390 fast network checksum routines
+ *    see also arch/S390/lib/checksum.c
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Ulrich Hild        (first version)
+ *               Martin Schwidefsky (heavily optimized CKSM version)
+ *               D.J. Barrow        (third attempt) 
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+static inline unsigned int
+csum_partial(const unsigned char * buff, int len, unsigned int sum)
+{
+	/*
+	 * Experiments with ethernet and slip connections show that buf
+	 * is aligned on either a 2-byte or 4-byte boundary.
+	 */
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.subreg.even = (unsigned long) buff;
+	rp.subreg.odd = (unsigned long) len;
+	__asm__ __volatile__ (
+		"0:  cksm %0,%1\n"	/* do checksum on longs */
+		"    jo   0b\n"
+		: "+&d" (sum), "+&a" (rp) : : "cc", "memory" );
+#else /* __s390x__ */
+        __asm__ __volatile__ (
+                "    lgr  2,%1\n"    /* address in gpr 2 */
+                "    lgfr 3,%2\n"    /* length in gpr 3 */
+                "0:  cksm %0,2\n"    /* do checksum on longs */
+                "    jo   0b\n"
+                : "+&d" (sum)
+                : "d" (buff), "d" (len)
+                : "cc", "memory", "2", "3" );
+#endif /* __s390x__ */
+	return sum;
+}
+
+/*
+ * csum_partial as an inline function
+ */
+static inline unsigned int 
+csum_partial_inline(const unsigned char * buff, int len, unsigned int sum)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.subreg.even = (unsigned long) buff;
+	rp.subreg.odd = (unsigned long) len;
+	__asm__ __volatile__ (
+		"0:  cksm %0,%1\n"    /* do checksum on longs */
+		"    jo   0b\n"
+                : "+&d" (sum), "+&a" (rp) : : "cc", "memory" );
+#else /* __s390x__ */
+	__asm__ __volatile__ (
+		"    lgr  2,%1\n"    /* address in gpr 2 */
+		"    lgfr 3,%2\n"    /* length in gpr 3 */
+		"0:  cksm %0,2\n"    /* do checksum on longs */
+		"    jo   0b\n"
+                : "+&d" (sum)
+		: "d" (buff), "d" (len)
+                : "cc", "memory", "2", "3" );
+#endif /* __s390x__ */
+	return sum;
+}
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ *
+ * Copy from userspace and compute checksum.  If we catch an exception
+ * then zero the rest of the buffer.
+ */
+static inline unsigned int
+csum_partial_copy_from_user(const char __user *src, char *dst,
+                                          int len, unsigned int sum,
+                                          int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+		
+	return csum_partial(dst, len, sum);
+}
+
+
+static inline unsigned int
+csum_partial_copy_nocheck (const char *src, char *dst, int len, unsigned int sum)
+{
+        memcpy(dst,src,len);
+        return csum_partial_inline(dst, len, sum);
+}
+
+/*
+ *      Fold a partial checksum without adding pseudo headers
+ */
+static inline unsigned short
+csum_fold(unsigned int sum)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	__asm__ __volatile__ (
+		"    slr  %N1,%N1\n" /* %0 = H L */
+		"    lr   %1,%0\n"   /* %0 = H L, %1 = H L 0 0 */
+		"    srdl %1,16\n"   /* %0 = H L, %1 = 0 H L 0 */
+		"    alr  %1,%N1\n"  /* %0 = H L, %1 = L H L 0 */
+		"    alr  %0,%1\n"   /* %0 = H+L+C L+H */
+		"    srl  %0,16\n"   /* %0 = H+L+C */
+		: "+&d" (sum), "=d" (rp) : : "cc" );
+#else /* __s390x__ */
+	__asm__ __volatile__ (
+		"    sr   3,3\n"   /* %0 = H*65536 + L */
+		"    lr   2,%0\n"  /* %0 = H L, R2/R3 = H L / 0 0 */
+		"    srdl 2,16\n"  /* %0 = H L, R2/R3 = 0 H / L 0 */
+		"    alr  2,3\n"   /* %0 = H L, R2/R3 = L H / L 0 */
+		"    alr  %0,2\n"  /* %0 = H+L+C L+H */
+                "    srl  %0,16\n" /* %0 = H+L+C */
+		: "+&d" (sum) : : "cc", "2", "3");
+#endif /* __s390x__ */
+	return ((unsigned short) ~sum);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline unsigned short
+ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+	unsigned long sum;
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.subreg.even = (unsigned long) iph;
+	rp.subreg.odd = (unsigned long) ihl*4;
+        __asm__ __volatile__ (
+		"    sr   %0,%0\n"   /* set sum to zero */
+                "0:  cksm %0,%1\n"   /* do checksum on longs */
+                "    jo   0b\n"
+                : "=&d" (sum), "+&a" (rp) : : "cc", "memory" );
+#else /* __s390x__ */
+        __asm__ __volatile__ (
+		"    slgr %0,%0\n"   /* set sum to zero */
+                "    lgr  2,%1\n"    /* address in gpr 2 */
+                "    lgfr 3,%2\n"    /* length in gpr 3 */
+                "0:  cksm %0,2\n"    /* do checksum on ints */
+                "    jo   0b\n"
+                : "=&d" (sum)
+                : "d" (iph), "d" (ihl*4)
+                : "cc", "memory", "2", "3" );
+#endif /* __s390x__ */
+        return csum_fold(sum);
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 32-bit checksum
+ */
+static inline unsigned int 
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+                   unsigned short len, unsigned short proto,
+                   unsigned int sum)
+{
+#ifndef __s390x__
+	__asm__ __volatile__ (
+                "    alr   %0,%1\n"  /* sum += saddr */
+                "    brc   12,0f\n"
+		"    ahi   %0,1\n"   /* add carry */
+		"0:"
+		: "+&d" (sum) : "d" (saddr) : "cc" );
+	__asm__ __volatile__ (
+                "    alr   %0,%1\n"  /* sum += daddr */
+                "    brc   12,1f\n"
+                "    ahi   %0,1\n"   /* add carry */
+		"1:"
+		: "+&d" (sum) : "d" (daddr) : "cc" );
+	__asm__ __volatile__ (
+                "    alr   %0,%1\n"  /* sum += (len<<16) + (proto<<8) */
+		"    brc   12,2f\n"
+		"    ahi   %0,1\n"   /* add carry */
+		"2:"
+		: "+&d" (sum)
+		: "d" (((unsigned int) len<<16) + (unsigned int) proto)
+		: "cc" );
+#else /* __s390x__ */
+	__asm__ __volatile__ (
+                "    lgfr  %0,%0\n"
+                "    algr  %0,%1\n"  /* sum += saddr */
+                "    brc   12,0f\n"
+		"    aghi  %0,1\n"   /* add carry */
+		"0:  algr  %0,%2\n"  /* sum += daddr */
+                "    brc   12,1f\n"
+                "    aghi  %0,1\n"   /* add carry */
+		"1:  algfr %0,%3\n"  /* sum += (len<<16) + proto */
+		"    brc   12,2f\n"
+		"    aghi  %0,1\n"   /* add carry */
+		"2:  srlg  0,%0,32\n"
+                "    alr   %0,0\n"   /* fold to 32 bits */
+                "    brc   12,3f\n"
+                "    ahi   %0,1\n"   /* add carry */
+                "3:  llgfr %0,%0"
+		: "+&d" (sum)
+		: "d" (saddr), "d" (daddr),
+		  "d" (((unsigned int) len<<16) + (unsigned int) proto)
+		: "cc", "0" );
+#endif /* __s390x__ */
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
+                  unsigned short len, unsigned short proto,
+                  unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short
+ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* _S390_CHECKSUM_H */
+
+
diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
new file mode 100644
index 000000000000..089cf567c317
--- /dev/null
+++ b/include/asm-s390/cio.h
@@ -0,0 +1,281 @@
+/*
+ *  include/asm-s390/cio.h
+ *  include/asm-s390x/cio.h
+ *
+ * Common interface for I/O on S/390
+ */
+#ifndef _ASM_S390_CIO_H_
+#define _ASM_S390_CIO_H_
+
+#include <linux/spinlock.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+
+#define LPM_ANYPATH 0xff
+
+/*
+ * subchannel status word
+ */
+struct scsw {
+	__u32 key  : 4;		/* subchannel key */
+	__u32 sctl : 1; 	/* suspend control */
+	__u32 eswf : 1; 	/* ESW format */
+	__u32 cc   : 2; 	/* deferred condition code */
+	__u32 fmt  : 1; 	/* format */
+	__u32 pfch : 1; 	/* prefetch */
+	__u32 isic : 1; 	/* initial-status interruption control */
+	__u32 alcc : 1; 	/* address-limit checking control */
+	__u32 ssi  : 1; 	/* supress-suspended interruption */
+	__u32 zcc  : 1; 	/* zero condition code */
+	__u32 ectl : 1; 	/* extended control */
+	__u32 pno  : 1;	    	/* path not operational */
+	__u32 res  : 1;	    	/* reserved */
+	__u32 fctl : 3;	    	/* function control */
+	__u32 actl : 7;	    	/* activity control */
+	__u32 stctl : 5;    	/* status control */
+	__u32 cpa;	    	/* channel program address */
+	__u32 dstat : 8;    	/* device status */
+	__u32 cstat : 8;    	/* subchannel status */
+	__u32 count : 16;   	/* residual count */
+} __attribute__ ((packed));
+
+#define SCSW_FCTL_CLEAR_FUNC	 0x1
+#define SCSW_FCTL_HALT_FUNC	 0x2
+#define SCSW_FCTL_START_FUNC	 0x4
+
+#define SCSW_ACTL_SUSPENDED	 0x1
+#define SCSW_ACTL_DEVACT	 0x2
+#define SCSW_ACTL_SCHACT	 0x4
+#define SCSW_ACTL_CLEAR_PEND	 0x8
+#define SCSW_ACTL_HALT_PEND	 0x10
+#define SCSW_ACTL_START_PEND	 0x20
+#define SCSW_ACTL_RESUME_PEND	 0x40
+
+#define SCSW_STCTL_STATUS_PEND	 0x1
+#define SCSW_STCTL_SEC_STATUS	 0x2
+#define SCSW_STCTL_PRIM_STATUS	 0x4
+#define SCSW_STCTL_INTER_STATUS	 0x8
+#define SCSW_STCTL_ALERT_STATUS	 0x10
+
+#define DEV_STAT_ATTENTION	 0x80
+#define DEV_STAT_STAT_MOD	 0x40
+#define DEV_STAT_CU_END		 0x20
+#define DEV_STAT_BUSY		 0x10
+#define DEV_STAT_CHN_END	 0x08
+#define DEV_STAT_DEV_END	 0x04
+#define DEV_STAT_UNIT_CHECK	 0x02
+#define DEV_STAT_UNIT_EXCEP	 0x01
+
+#define SCHN_STAT_PCI		 0x80
+#define SCHN_STAT_INCORR_LEN	 0x40
+#define SCHN_STAT_PROG_CHECK	 0x20
+#define SCHN_STAT_PROT_CHECK	 0x10
+#define SCHN_STAT_CHN_DATA_CHK	 0x08
+#define SCHN_STAT_CHN_CTRL_CHK	 0x04
+#define SCHN_STAT_INTF_CTRL_CHK	 0x02
+#define SCHN_STAT_CHAIN_CHECK	 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT		0x80
+#define SNS_CMD_REJECT		SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ	0x40
+#define SNS0_BUS_OUT_CHECK	0x20
+#define SNS0_EQUIPMENT_CHECK	0x10
+#define SNS0_DATA_CHECK		0x08
+#define SNS0_OVERRUN		0x04
+#define SNS0_INCOMPL_DOMAIN	0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR		0x80
+#define SNS1_INV_TRACK_FORMAT	0x40
+#define SNS1_EOC		0x20
+#define SNS1_MESSAGE_TO_OPER	0x10
+#define SNS1_NO_REC_FOUND	0x08
+#define SNS1_FILE_PROTECTED	0x04
+#define SNS1_WRITE_INHIBITED	0x02
+#define SNS1_INPRECISE_END	0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE	0x80
+#define SNS2_CORRECTABLE	0x40
+#define SNS2_FIRST_LOG_ERR	0x20
+#define SNS2_ENV_DATA_PRESENT	0x10
+#define SNS2_INPRECISE_END	0x04
+
+struct ccw1 {
+	__u8  cmd_code;		/* command code */
+	__u8  flags;   		/* flags, like IDA addressing, etc. */
+	__u16 count;   		/* byte count */
+	__u32 cda;     		/* data address */
+} __attribute__ ((packed,aligned(8)));
+
+#define CCW_FLAG_DC		0x80
+#define CCW_FLAG_CC		0x40
+#define CCW_FLAG_SLI		0x20
+#define CCW_FLAG_SKIP		0x10
+#define CCW_FLAG_PCI		0x08
+#define CCW_FLAG_IDA		0x04
+#define CCW_FLAG_SUSPEND	0x02
+
+#define CCW_CMD_READ_IPL	0x02
+#define CCW_CMD_NOOP		0x03
+#define CCW_CMD_BASIC_SENSE	0x04
+#define CCW_CMD_TIC		0x08
+#define CCW_CMD_STLCK           0x14
+#define CCW_CMD_SENSE_PGID	0x34
+#define CCW_CMD_SUSPEND_RECONN	0x5B
+#define CCW_CMD_RDC		0x64
+#define CCW_CMD_RELEASE		0x94
+#define CCW_CMD_SET_PGID	0xAF
+#define CCW_CMD_SENSE_ID	0xE4
+#define CCW_CMD_DCTL		0xF3
+
+#define SENSE_MAX_COUNT		0x20
+
+struct erw {
+	__u32 res0  : 3;  	/* reserved */
+	__u32 auth  : 1;	/* Authorization check */
+	__u32 pvrf  : 1;  	/* path-verification-required flag */
+	__u32 cpt   : 1;  	/* channel-path timeout */
+	__u32 fsavf : 1;  	/* Failing storage address validity flag */
+	__u32 cons  : 1;  	/* concurrent-sense */
+	__u32 scavf : 1;	/* Secondary ccw address validity flag */
+	__u32 fsaf  : 1;	/* Failing storage address format */
+	__u32 scnt  : 6;  	/* sense count if cons == 1 */
+	__u32 res16 : 16; 	/* reserved */
+} __attribute__ ((packed));
+
+/*
+ * subchannel logout area
+ */
+struct sublog {
+	__u32 res0  : 1;  	/* reserved */
+	__u32 esf   : 7;  	/* extended status flags */
+	__u32 lpum  : 8;  	/* last path used mask */
+	__u32 arep  : 1;  	/* ancillary report */
+	__u32 fvf   : 5;  	/* field-validity flags */
+	__u32 sacc  : 2;  	/* storage access code */
+	__u32 termc : 2;  	/* termination code */
+	__u32 devsc : 1;  	/* device-status check */
+	__u32 serr  : 1;  	/* secondary error */
+	__u32 ioerr : 1;  	/* i/o-error alert */
+	__u32 seqc  : 3;  	/* sequence code */
+} __attribute__ ((packed));
+
+/*
+ * Format 0 Extended Status Word (ESW)
+ */
+struct esw0 {
+	struct sublog sublog;	/* subchannel logout */
+	struct erw erw;	    	/* extended report word */
+	__u32  faddr[2];    	/* failing storage address */
+	__u32  saddr;  		/* secondary ccw address */
+} __attribute__ ((packed));
+
+/*
+ * Format 1 Extended Status Word (ESW)
+ */
+struct esw1 {
+	__u8  zero0;		/* reserved zeros */
+	__u8  lpum;		/* last path used mask */
+	__u16 zero16;		/* reserved zeros */
+	struct erw erw;		/* extended report word */
+	__u32 zeros[3]; 	/* 2 fullwords of zeros */
+} __attribute__ ((packed));
+
+/*
+ * Format 2 Extended Status Word (ESW)
+ */
+struct esw2 {
+	__u8  zero0;		/* reserved zeros */
+	__u8  lpum;		/* last path used mask */
+	__u16 dcti;		/* device-connect-time interval */
+	struct erw erw;		/* extended report word */
+	__u32 zeros[3]; 	/* 2 fullwords of zeros */
+} __attribute__ ((packed));
+
+/*
+ * Format 3 Extended Status Word (ESW)
+ */
+struct esw3 {
+	__u8  zero0;		/* reserved zeros */
+	__u8  lpum;		/* last path used mask */
+	__u16 res;		/* reserved */
+	struct erw erw;		/* extended report word */
+	__u32 zeros[3]; 	/* 2 fullwords of zeros */
+} __attribute__ ((packed));
+
+/*
+ * interruption response block
+ */
+struct irb {
+	struct scsw scsw;	/* subchannel status word */
+	union {			/* extended status word, 4 formats */
+		struct esw0 esw0;
+		struct esw1 esw1;
+		struct esw2 esw2;
+		struct esw3 esw3;
+	} esw;
+	__u8   ecw[32];		/* extended control word */
+} __attribute__ ((packed,aligned(4)));
+
+/*
+ * command information word  (CIW) layout
+ */
+struct ciw {
+	__u32 et       :  2; 	/* entry type */
+	__u32 reserved :  2; 	/* reserved */
+	__u32 ct       :  4; 	/* command type */
+	__u32 cmd      :  8; 	/* command */
+	__u32 count    : 16; 	/* coun */
+} __attribute__ ((packed));
+
+#define CIW_TYPE_RCD	0x0    	/* read configuration data */
+#define CIW_TYPE_SII	0x1    	/* set interface identifier */
+#define CIW_TYPE_RNI	0x2    	/* read node identifier */
+
+/*
+ * Flags used as input parameters for do_IO()
+ */
+#define DOIO_ALLOW_SUSPEND	 0x0001 /* allow for channel prog. suspend */
+#define DOIO_DENY_PREFETCH	 0x0002 /* don't allow for CCW prefetch */
+#define DOIO_SUPPRESS_INTER	 0x0004 /* suppress intermediate inter. */
+					/* ... for suspended CCWs */
+/* Device or subchannel gone. */
+#define CIO_GONE       0x0001
+/* No path to device. */
+#define CIO_NO_PATH    0x0002
+/* Device has appeared. */
+#define CIO_OPER       0x0004
+/* Sick revalidation of device. */
+#define CIO_REVALIDATE 0x0008
+
+struct diag210 {
+	__u16 vrdcdvno : 16;   /* device number (input) */
+	__u16 vrdclen  : 16;   /* data block length (input) */
+	__u32 vrdcvcla : 8;    /* virtual device class (output) */
+	__u32 vrdcvtyp : 8;    /* virtual device type (output) */
+	__u32 vrdcvsta : 8;    /* virtual device status (output) */
+	__u32 vrdcvfla : 8;    /* virtual device flags (output) */
+	__u32 vrdcrccl : 8;    /* real device class (output) */
+	__u32 vrdccrty : 8;    /* real device type (output) */
+	__u32 vrdccrmd : 8;    /* real device model (output) */
+	__u32 vrdccrft : 8;    /* real device feature (output) */
+} __attribute__ ((packed,aligned(4)));
+
+extern int diag210(struct diag210 *addr);
+
+extern void wait_cons_dev(void);
+
+extern void clear_all_subchannels(void);
+
+#endif
+
+#endif
diff --git a/include/asm-s390/cmb.h b/include/asm-s390/cmb.h
new file mode 100644
index 000000000000..1bfe2bd630b5
--- /dev/null
+++ b/include/asm-s390/cmb.h
@@ -0,0 +1,98 @@
+#ifndef S390_CMB_H
+#define S390_CMB_H
+/**
+ * struct cmbdata -- channel measurement block data for user space
+ *
+ * @size:	size of the stored data
+ * @ssch_rsch_count: XXX
+ * @sample_count:
+ * @device_connect_time:
+ * @function_pending_time:
+ * @device_disconnect_time:
+ * @control_unit_queuing_time:
+ * @device_active_only_time:
+ * @device_busy_time:
+ * @initial_command_response_time:
+ *
+ * all values are stored as 64 bit for simplicity, especially
+ * in 32 bit emulation mode. All time values are normalized to
+ * nanoseconds.
+ * Currently, two formats are known, which differ by the size of
+ * this structure, i.e. the last two members are only set when
+ * the extended channel measurement facility (first shipped in
+ * z990 machines) is activated.
+ * Potentially, more fields could be added, which results in a
+ * new ioctl number.
+ **/
+struct cmbdata {
+	__u64 size;
+	__u64 elapsed_time;
+ /* basic and exended format: */
+	__u64 ssch_rsch_count;
+	__u64 sample_count;
+	__u64 device_connect_time;
+	__u64 function_pending_time;
+	__u64 device_disconnect_time;
+	__u64 control_unit_queuing_time;
+	__u64 device_active_only_time;
+ /* extended format only: */
+	__u64 device_busy_time;
+	__u64 initial_command_response_time;
+};
+
+/* enable channel measurement */
+#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER,32)
+/* enable channel measurement */
+#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER,33)
+/* reset channel measurement block */
+#define BIODASDRESETCMB		_IO(DASD_IOCTL_LETTER,34)
+/* read channel measurement data */
+#define BIODASDREADCMB		_IOWR(DASD_IOCTL_LETTER,32,u64)
+/* read channel measurement data */
+#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER,33,struct cmbdata)
+
+#ifdef __KERNEL__
+
+/**
+ * enable_cmf() - switch on the channel measurement for a specific device
+ *  @cdev:	The ccw device to be enabled
+ *  returns 0 for success or a negative error value.
+ *
+ *  Context:
+ *    non-atomic
+ **/
+extern int enable_cmf(struct ccw_device *cdev);
+
+/**
+ * disable_cmf() - switch off the channel measurement for a specific device
+ *  @cdev:	The ccw device to be disabled
+ *  returns 0 for success or a negative error value.
+ *
+ *  Context:
+ *    non-atomic
+ **/
+extern int disable_cmf(struct ccw_device *cdev);
+
+/**
+ * cmf_read() - read one value from the current channel measurement block
+ * @cmf:	the channel to be read
+ * @index:	the name of the value that is read
+ *
+ *  Context:
+ *    any
+ **/
+
+extern u64 cmf_read(struct ccw_device *cdev, int index);
+/**
+ * cmf_readall() - read one value from the current channel measurement block
+ * @cmf:	the channel to be read
+ * @data:	a pointer to a data block that will be filled
+ *
+ *  Context:
+ *    any
+ **/
+extern int cmf_readall(struct ccw_device *cdev, struct cmbdata*data);
+extern void cmf_reset(struct ccw_device *cdev);
+
+#endif /* __KERNEL__ */
+#endif /* S390_CMB_H */
diff --git a/include/asm-s390/compat.h b/include/asm-s390/compat.h
new file mode 100644
index 000000000000..7f8f544eb262
--- /dev/null
+++ b/include/asm-s390/compat.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_S390X_COMPAT_H
+#define _ASM_S390X_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		compat_uid_t;
+typedef u16		compat_gid_t;
+typedef u32		compat_uid32_t;
+typedef u32		compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64       12
+#define F_SETLK64       13
+#define F_SETLKW64      14    
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	s32		f_type;
+	s32		f_bsize;
+	s32		f_blocks;
+	s32		f_bfree;
+	s32		f_bavail;
+	s32		f_files;
+	s32		f_ffree;
+	compat_fsid_t	f_fsid;
+	s32		f_namelen;
+	s32		f_frsize;
+	s32		f_spare[6];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)(uptr & 0x7fffffffUL);
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	unsigned long stack;
+
+	stack = KSTK_ESP(current);
+	if (test_thread_flag(TIF_31BIT))
+		stack &= 0x7fffffffUL;
+	return (void __user *) (stack - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	compat_uid32_t uid;
+	compat_gid32_t gid;
+	compat_uid32_t cuid;
+	compat_gid32_t cgid;
+	compat_mode_t mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	unsigned int __unused1;
+	unsigned int __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __pad1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __pad2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t   msg_stime;
+	compat_ulong_t __pad1;
+	compat_time_t   msg_rtime;
+	compat_ulong_t __pad2;
+	compat_time_t   msg_ctime;
+	compat_ulong_t __pad3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __pad1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __pad2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __pad3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+#endif /* _ASM_S390X_COMPAT_H */
diff --git a/include/asm-s390/cpcmd.h b/include/asm-s390/cpcmd.h
new file mode 100644
index 000000000000..1d33c5da083e
--- /dev/null
+++ b/include/asm-s390/cpcmd.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/s390/kernel/cpcmd.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Christian Borntraeger (cborntra@de.ibm.com),
+ */
+
+#ifndef __CPCMD__
+#define __CPCMD__
+
+/*
+ * the caller of __cpcmd has to ensure that the response buffer is below 2 GB
+ */
+extern void __cpcmd(char *cmd, char *response, int rlen);
+
+#ifndef __s390x__
+#define cpcmd __cpcmd
+#else
+extern void cpcmd(char *cmd, char *response, int rlen);
+#endif /*__s390x__*/
+
+#endif
diff --git a/include/asm-s390/cputime.h b/include/asm-s390/cputime.h
new file mode 100644
index 000000000000..4b3ef7cad115
--- /dev/null
+++ b/include/asm-s390/cputime.h
@@ -0,0 +1,176 @@
+/*
+ *  include/asm-s390/cputime.h
+ *
+ *  (C) Copyright IBM Corp. 2004
+ *
+ *  Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _S390_CPUTIME_H
+#define _S390_CPUTIME_H
+
+#include <asm/div64.h>
+
+/* We want to use micro-second resolution. */
+
+typedef unsigned long long cputime_t;
+typedef unsigned long long cputime64_t;
+
+#ifndef __s390x__
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	register_pair rp;
+
+	rp.pair = n >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
+	return rp.subreg.odd;
+}
+
+#else /* __s390x__ */
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	return n / base;
+}
+
+#endif /* __s390x__ */
+
+#define cputime_zero			(0ULL)
+#define cputime_max			((~0UL >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n) ({		\
+	unsigned long long __div = (__a);	\
+	do_div(__div,__n);			\
+	__div;					\
+})
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+#define cputime_to_jiffies(__ct)	(__div((__ct), 1000000 / HZ))
+#define jiffies_to_cputime(__hz)	((cputime_t)(__hz) * (1000000 / HZ))
+
+#define cputime64_zero			(0ULL)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+static inline u64
+cputime64_to_jiffies64(cputime64_t cputime)
+{
+	do_div(cputime, 1000000 / HZ);
+	return cputime;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_msecs(const cputime_t cputime)
+{
+	return __div(cputime, 1000);
+}
+
+static inline cputime_t
+msecs_to_cputime(const unsigned int m)
+{
+	return (cputime_t) m * 1000;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_secs(const cputime_t cputime)
+{
+	return __div(cputime, 1000000);
+}
+
+static inline cputime_t
+secs_to_cputime(const unsigned int s)
+{
+	return (cputime_t) s * 1000000;
+}
+
+/*
+ * Convert cputime to timespec and back.
+ */
+static inline cputime_t
+timespec_to_cputime(const struct timespec *value)
+{
+        return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timespec(const cputime_t cputime, struct timespec *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_nsec = rp.subreg.even * 1000;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_nsec = (cputime % 1000000) * 1000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to timeval and back.
+ * Since cputime and timeval have the same resolution (microseconds)
+ * this is easy.
+ */
+static inline cputime_t
+timeval_to_cputime(const struct timeval *value)
+{
+        return value->tv_usec + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timeval(const cputime_t cputime, struct timeval *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_usec = rp.subreg.even;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_usec = cputime % 1000000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to clock and back.
+ */
+static inline clock_t
+cputime_to_clock_t(cputime_t cputime)
+{
+	return __div(cputime, 1000000 / USER_HZ);
+}
+
+static inline cputime_t
+clock_t_to_cputime(unsigned long x)
+{
+	return (cputime_t) x * (1000000 / USER_HZ);
+}
+
+/*
+ * Convert cputime64 to clock.
+ */
+static inline clock_t
+cputime64_to_clock_t(cputime64_t cputime)
+{
+       return __div(cputime, 1000000 / USER_HZ);
+}
+
+#endif /* _S390_CPUTIME_H */
diff --git a/include/asm-s390/current.h b/include/asm-s390/current.h
new file mode 100644
index 000000000000..83cf36cde2da
--- /dev/null
+++ b/include/asm-s390/current.h
@@ -0,0 +1,23 @@
+/*
+ *  include/asm-s390/current.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/current.h"
+ */
+
+#ifndef _S390_CURRENT_H
+#define _S390_CURRENT_H
+
+#ifdef __KERNEL__
+#include <asm/lowcore.h>
+
+struct task_struct;
+
+#define current ((struct task_struct *const)S390_lowcore.current_task)
+
+#endif
+
+#endif /* !(_S390_CURRENT_H) */
diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h
new file mode 100644
index 000000000000..77b10d6adabd
--- /dev/null
+++ b/include/asm-s390/dasd.h
@@ -0,0 +1,268 @@
+/* 
+ * File...........: linux/drivers/s390/block/dasd.c
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * This file is the interface of the DASD device driver, which is exported to user space
+ * any future changes wrt the API will result in a change of the APIVERSION reported
+ * to userspace by the DASDAPIVER-ioctl
+ *
+ * $Revision: 1.6 $
+ *
+ */
+
+#ifndef DASD_H
+#define DASD_H
+#include <linux/ioctl.h>
+
+#define DASD_IOCTL_LETTER 'D'
+
+#define DASD_API_VERSION 6
+
+/* 
+ * struct dasd_information2_t
+ * represents any data about the device, which is visible to userspace.
+ *  including foramt and featueres.
+ */
+typedef struct dasd_information2_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+        unsigned int format;          /* format info like formatted/cdl/ldl/... */
+        unsigned int features;        /* dasd features like 'ro',...            */
+        unsigned int reserved0;       /* reserved for further use ,...          */
+        unsigned int reserved1;       /* reserved for further use ,...          */
+        unsigned int reserved2;       /* reserved for further use ,...          */
+        unsigned int reserved3;       /* reserved for further use ,...          */
+        unsigned int reserved4;       /* reserved for further use ,...          */
+        unsigned int reserved5;       /* reserved for further use ,...          */
+        unsigned int reserved6;       /* reserved for further use ,...          */
+        unsigned int reserved7;       /* reserved for further use ,...          */
+} dasd_information2_t;
+
+/*
+ * values to be used for dasd_information_t.format
+ * 0x00: NOT formatted
+ * 0x01: Linux disc layout
+ * 0x02: Common disc layout
+ */
+#define DASD_FORMAT_NONE 0
+#define DASD_FORMAT_LDL  1
+#define DASD_FORMAT_CDL  2
+/*
+ * values to be used for dasd_information_t.features
+ * 0x00: default features
+ * 0x01: readonly (ro)
+ * 0x02: use diag discipline (diag)
+ */
+#define DASD_FEATURE_DEFAULT  0
+#define DASD_FEATURE_READONLY 1
+#define DASD_FEATURE_USEDIAG  2
+
+#define DASD_PARTN_BITS 2
+
+/* 
+ * struct dasd_information_t
+ * represents any data about the data, which is visible to userspace
+ */
+typedef struct dasd_information_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+} dasd_information_t;
+
+/*
+ * Read Subsystem Data - Perfomance Statistics
+ */ 
+typedef struct dasd_rssd_perf_stats_t {
+	unsigned char  invalid:1;
+	unsigned char  format:3;
+	unsigned char  data_format:4;
+	unsigned char  unit_address;
+	unsigned short device_status;
+	unsigned int   nr_read_normal;
+	unsigned int   nr_read_normal_hits;
+	unsigned int   nr_write_normal;
+	unsigned int   nr_write_fast_normal_hits;
+	unsigned int   nr_read_seq;
+	unsigned int   nr_read_seq_hits;
+	unsigned int   nr_write_seq;
+	unsigned int   nr_write_fast_seq_hits;
+	unsigned int   nr_read_cache;
+	unsigned int   nr_read_cache_hits;
+	unsigned int   nr_write_cache;
+	unsigned int   nr_write_fast_cache_hits;
+	unsigned int   nr_inhibit_cache;
+	unsigned int   nr_bybass_cache;
+	unsigned int   nr_seq_dasd_to_cache;
+	unsigned int   nr_dasd_to_cache;
+	unsigned int   nr_cache_to_dasd;
+	unsigned int   nr_delayed_fast_write;
+	unsigned int   nr_normal_fast_write;
+	unsigned int   nr_seq_fast_write;
+	unsigned int   nr_cache_miss;
+	unsigned char  status2;
+	unsigned int   nr_quick_write_promotes;
+	unsigned char  reserved;
+	unsigned short ssid;
+	unsigned char  reseved2[96];
+} __attribute__((packed)) dasd_rssd_perf_stats_t;
+
+/* 
+ * struct profile_info_t
+ * holds the profinling information 
+ */
+typedef struct dasd_profile_info_t {
+        unsigned int dasd_io_reqs;	 /* number of requests processed at all */
+        unsigned int dasd_io_sects;	 /* number of sectors processed at all */
+        unsigned int dasd_io_secs[32];	 /* histogram of request's sizes */
+        unsigned int dasd_io_times[32];	 /* histogram of requests's times */
+        unsigned int dasd_io_timps[32];	 /* histogram of requests's times per sector */
+        unsigned int dasd_io_time1[32];	 /* histogram of time from build to start */
+        unsigned int dasd_io_time2[32];	 /* histogram of time from start to irq */
+        unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */
+        unsigned int dasd_io_time3[32];	 /* histogram of time from irq to end */
+        unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */
+} dasd_profile_info_t;
+
+/* 
+ * struct format_data_t
+ * represents all data necessary to format a dasd
+ */
+typedef struct format_data_t {
+	int start_unit; /* from track */
+	int stop_unit;  /* to track */
+	int blksize;    /* sectorsize */
+        int intensity;  
+} format_data_t;
+
+/*
+ * values to be used for format_data_t.intensity
+ * 0/8: normal format
+ * 1/9: also write record zero
+ * 3/11: also write home address
+ * 4/12: invalidate track
+ */
+#define DASD_FMT_INT_FMT_R0 1 /* write record zero */
+#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */
+#define DASD_FMT_INT_INVAL  4 /* invalidate tracks */
+#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */
+
+
+/* 
+ * struct attrib_data_t
+ * represents the operation (cache) bits for the device.
+ * Used in DE to influence caching of the DASD.
+ */
+typedef struct attrib_data_t {
+	unsigned char operation:3;     /* cache operation mode */
+	unsigned char reserved:5;      /* cache operation mode */
+	__u16         nr_cyl;          /* no of cyliners for read ahaed */
+	__u8          reserved2[29];   /* for future use */
+} __attribute__ ((packed)) attrib_data_t;
+
+/* definition of operation (cache) bits within attributes of DE */
+#define DASD_NORMAL_CACHE  0x0
+#define DASD_BYPASS_CACHE  0x1
+#define DASD_INHIBIT_LOAD  0x2
+#define DASD_SEQ_ACCESS    0x3
+#define DASD_SEQ_PRESTAGE  0x4
+#define DASD_REC_ACCESS    0x5
+
+
+/********************************************************************************
+ * SECTION: Definition of IOCTLs
+ *
+ * Here ist how the ioctl-nr should be used:
+ *    0 -   31   DASD driver itself
+ *   32 -  239   still open
+ *  240 -  255   reserved for EMC 
+ *******************************************************************************/
+
+/* Disable the volume (for Linux) */
+#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) 
+/* Enable the volume (for Linux) */
+#define BIODASDENABLE  _IO(DASD_IOCTL_LETTER,1)  
+/* Issue a reserve/release command, rsp. */
+#define BIODASDRSRV    _IO(DASD_IOCTL_LETTER,2) /* reserve */
+#define BIODASDRLSE    _IO(DASD_IOCTL_LETTER,3) /* release */
+#define BIODASDSLCK    _IO(DASD_IOCTL_LETTER,4) /* steal lock */
+/* reset profiling information of a device */
+#define BIODASDPRRST   _IO(DASD_IOCTL_LETTER,5)
+/* Quiesce IO on device */
+#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) 
+/* Resume IO on device */
+#define BIODASDRESUME  _IO(DASD_IOCTL_LETTER,7) 
+
+
+/* retrieve API version number */
+#define DASDAPIVER     _IOR(DASD_IOCTL_LETTER,0,int)
+/* Get information on a dasd device */
+#define BIODASDINFO    _IOR(DASD_IOCTL_LETTER,1,dasd_information_t)
+/* retrieve profiling information of a device */
+#define BIODASDPRRD    _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t)
+/* Get information on a dasd device (enhanced) */
+#define BIODASDINFO2   _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t)
+/* Performance Statistics Read */
+#define BIODASDPSRD    _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
+/* Get Attributes (cache operations) */
+#define BIODASDGATTR   _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) 
+
+
+/* #define BIODASDFORMAT  _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
+#define BIODASDFMT     _IOW(DASD_IOCTL_LETTER,1,format_data_t) 
+/* Set Attributes (cache operations) */
+#define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
+
+
+#endif				/* DASD_H */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4 
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
diff --git a/include/asm-s390/debug.h b/include/asm-s390/debug.h
new file mode 100644
index 000000000000..28ef2354b1b2
--- /dev/null
+++ b/include/asm-s390/debug.h
@@ -0,0 +1,249 @@
+/*
+ *  include/asm-s390/debug.h
+ *   S/390 debug facility
+ *
+ *    Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH,
+ *                             IBM Corporation
+ */
+
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#include <linux/string.h>
+
+/* Note:
+ * struct __debug_entry must be defined outside of #ifdef __KERNEL__ 
+ * in order to allow a user program to analyze the 'raw'-view.
+ */
+
+struct __debug_entry{
+        union {
+                struct {
+                        unsigned long long clock:52;
+                        unsigned long long exception:1;
+                        unsigned long long level:3;
+                        unsigned long long cpuid:8;
+                } fields;
+
+                unsigned long long stck;
+        } id;
+        void* caller;
+} __attribute__((packed));
+
+
+#define __DEBUG_FEATURE_VERSION      1  /* version of debug feature */
+
+#ifdef __KERNEL__
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/proc_fs.h>
+
+#define DEBUG_MAX_LEVEL            6  /* debug levels range from 0 to 6 */
+#define DEBUG_OFF_LEVEL            -1 /* level where debug is switched off */
+#define DEBUG_FLUSH_ALL            -1 /* parameter to flush all areas */
+#define DEBUG_MAX_VIEWS            10 /* max number of views in proc fs */
+#define DEBUG_MAX_PROCF_LEN        16 /* max length for a proc file name */
+#define DEBUG_DEFAULT_LEVEL        3  /* initial debug level */
+
+#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */
+
+#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */
+                                             /* the entry information */
+
+#define STCK(x)	asm volatile ("STCK 0(%1)" : "=m" (x) : "a" (&(x)) : "cc")
+
+typedef struct __debug_entry debug_entry_t;
+
+struct debug_view;
+
+typedef struct debug_info {	
+	struct debug_info* next;
+	struct debug_info* prev;
+	atomic_t ref_count;
+	spinlock_t lock;			
+	int level;
+	int nr_areas;
+	int page_order;
+	int buf_size;
+	int entry_size;	
+	debug_entry_t** areas;
+	int active_area;
+	int *active_entry;
+	struct proc_dir_entry* proc_root_entry;
+	struct proc_dir_entry* proc_entries[DEBUG_MAX_VIEWS];
+	struct debug_view* views[DEBUG_MAX_VIEWS];	
+	char name[DEBUG_MAX_PROCF_LEN];
+} debug_info_t;
+
+typedef int (debug_header_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   int area,
+				   debug_entry_t* entry,
+				   char* out_buf);
+
+typedef int (debug_format_proc_t) (debug_info_t* id,
+				   struct debug_view* view, char* out_buf,
+				   const char* in_buf);
+typedef int (debug_prolog_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   char* out_buf);
+typedef int (debug_input_proc_t) (debug_info_t* id,
+				  struct debug_view* view,
+				  struct file* file,
+				  const char __user *user_buf,
+				  size_t in_buf_size, loff_t* offset);
+
+int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view,
+		         int area, debug_entry_t* entry, char* out_buf);						
+				
+struct debug_view {
+	char name[DEBUG_MAX_PROCF_LEN];
+	debug_prolog_proc_t* prolog_proc;
+	debug_header_proc_t* header_proc;
+	debug_format_proc_t* format_proc;
+	debug_input_proc_t*  input_proc;
+	void*                private_data;
+};
+
+extern struct debug_view debug_hex_ascii_view;
+extern struct debug_view debug_raw_view;
+extern struct debug_view debug_sprintf_view;
+
+/* do NOT use the _common functions */
+
+debug_entry_t* debug_event_common(debug_info_t* id, int level, 
+                                  const void* data, int length);
+
+debug_entry_t* debug_exception_common(debug_info_t* id, int level, 
+                                      const void* data, int length);
+
+/* Debug Feature API: */
+
+debug_info_t* debug_register(char* name, int pages_index, int nr_areas,
+                             int buf_size);
+
+void debug_unregister(debug_info_t* id);
+
+void debug_set_level(debug_info_t* id, int new_level);
+
+void debug_stop_all(void);
+
+extern inline debug_entry_t* 
+debug_event(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_event_common(id,level,data,length);
+}
+
+extern inline debug_entry_t* 
+debug_int_event(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned int));
+}
+
+extern inline debug_entry_t *
+debug_long_event (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned long));
+}
+
+extern inline debug_entry_t* 
+debug_text_event(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_event_common(id,level,txt,strlen(txt));
+}
+
+extern debug_entry_t *
+debug_sprintf_event(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+
+extern inline debug_entry_t* 
+debug_exception(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_exception_common(id,level,data,length);
+}
+
+extern inline debug_entry_t* 
+debug_int_exception(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned int));
+}
+
+extern inline debug_entry_t * 
+debug_long_exception (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned long));
+}
+
+extern inline debug_entry_t* 
+debug_text_exception(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level)) return NULL;
+        return debug_exception_common(id,level,txt,strlen(txt));
+}
+
+
+extern debug_entry_t *
+debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+int debug_register_view(debug_info_t* id, struct debug_view* view);
+int debug_unregister_view(debug_info_t* id, struct debug_view* view);
+
+/*
+   define the debug levels:
+   - 0 No debugging output to console or syslog
+   - 1 Log internal errors to syslog, ignore check conditions 
+   - 2 Log internal errors and check conditions to syslog
+   - 3 Log internal errors to console, log check conditions to syslog
+   - 4 Log internal errors and check conditions to console
+   - 5 panic on internal errors, log check conditions to console
+   - 6 panic on both, internal errors and check conditions
+ */
+
+#ifndef DEBUG_LEVEL
+#define DEBUG_LEVEL 4
+#endif
+
+#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y
+
+#if DEBUG_LEVEL > 0
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x )
+#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x )
+#else
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#endif				/* DASD_DEBUG */
+
+#undef DEBUG_MALLOC
+#ifdef DEBUG_MALLOC
+void *b;
+#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)
+#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x)
+#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b)
+#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b)
+#endif				/* DEBUG_MALLOC */
+
+#endif				/* __KERNEL__ */
+#endif				/* DEBUG_H */
diff --git a/include/asm-s390/delay.h b/include/asm-s390/delay.h
new file mode 100644
index 000000000000..78357314c450
--- /dev/null
+++ b/include/asm-s390/delay.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/delay.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/delay.h"
+ *    Copyright (C) 1993 Linus Torvalds
+ *
+ *  Delay routines calling functions in arch/s390/lib/delay.c
+ */
+ 
+#ifndef _S390_DELAY_H
+#define _S390_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* defined(_S390_DELAY_H) */
diff --git a/include/asm-s390/div64.h b/include/asm-s390/div64.h
new file mode 100644
index 000000000000..af098dc3cf59
--- /dev/null
+++ b/include/asm-s390/div64.h
@@ -0,0 +1,49 @@
+#ifndef __S390_DIV64
+#define __S390_DIV64
+
+#ifndef __s390x__
+
+/* for do_div "base" needs to be smaller than 2^31-1 */
+#define do_div(n, base) ({                                      \
+	unsigned long long __n = (n);				\
+	unsigned long __r;					\
+								\
+	asm ("   slr  0,0\n"					\
+	     "   l    1,%1\n"					\
+	     "   srdl 0,1\n"					\
+	     "   dr   0,%2\n"					\
+	     "   alr  1,1\n"					\
+	     "   alr  0,0\n"					\
+	     "   lhi  2,1\n"					\
+	     "   n    2,%1\n"					\
+	     "   alr  0,2\n"					\
+	     "   clr  0,%2\n"					\
+	     "   jl   0f\n"					\
+	     "   slr  0,%2\n"					\
+             "   ahi  1,1\n"					\
+	     "0: st   1,%1\n"					\
+	     "   l    1,4+%1\n"					\
+	     "   srdl 0,1\n"					\
+             "   dr   0,%2\n"					\
+	     "   alr  1,1\n"					\
+	     "   alr  0,0\n"					\
+	     "   lhi  2,1\n"					\
+	     "   n    2,4+%1\n"					\
+	     "   alr  0,2\n"					\
+	     "   clr  0,%2\n"					\
+             "   jl   1f\n"					\
+	     "   slr  0,%2\n"					\
+	     "   ahi  1,1\n"					\
+	     "1: st   1,4+%1\n"					\
+             "   lr   %0,0"					\
+	     : "=d" (__r), "=m" (__n)				\
+	     : "d" (base), "m" (__n) : "0", "1", "2", "cc" );	\
+	(n) = (__n);						\
+        __r;                                                    \
+})
+
+#else /* __s390x__ */
+#include <asm-generic/div64.h>
+#endif /* __s390x__ */
+
+#endif
diff --git a/include/asm-s390/dma-mapping.h b/include/asm-s390/dma-mapping.h
new file mode 100644
index 000000000000..09bb7b04f967
--- /dev/null
+++ b/include/asm-s390/dma-mapping.h
@@ -0,0 +1,14 @@
+/*
+ *  include/asm-s390/dma-mapping.h
+ *
+ *  S390 version
+ *
+ *  This file exists so that #include <dma-mapping.h> doesn't break anything.
+ */
+
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping-broken.h>
+
+#endif /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-s390/dma.h b/include/asm-s390/dma.h
new file mode 100644
index 000000000000..02720c449cd8
--- /dev/null
+++ b/include/asm-s390/dma.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-s390/dma.h
+ *
+ *  S390 version
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+
+#define MAX_DMA_ADDRESS         0x80000000
+
+#define free_dma(x)
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-s390/ebcdic.h b/include/asm-s390/ebcdic.h
new file mode 100644
index 000000000000..20e81e885821
--- /dev/null
+++ b/include/asm-s390/ebcdic.h
@@ -0,0 +1,49 @@
+/*
+ *  include/asm-s390/ebcdic.h
+ *    EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _EBCDIC_H
+#define _EBCDIC_H
+
+#ifndef _S390_TYPES_H
+#include <types.h>
+#endif
+
+extern __u8 _ascebc_500[];   /* ASCII -> EBCDIC 500 conversion table */
+extern __u8 _ebcasc_500[];   /* EBCDIC 500 -> ASCII conversion table */
+extern __u8 _ascebc[];   /* ASCII -> EBCDIC conversion table */
+extern __u8 _ebcasc[];   /* EBCDIC -> ASCII conversion table */
+extern __u8 _ebc_tolower[]; /* EBCDIC -> lowercase */
+extern __u8 _ebc_toupper[]; /* EBCDIC -> uppercase */
+
+extern __inline__ void
+codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr)
+{
+	if (nr-- <= 0)
+		return;
+        __asm__ __volatile__(
+		"   bras 1,1f\n"
+		"   tr   0(1,%0),0(%2)\n"
+                "0: tr   0(256,%0),0(%2)\n"
+		"   la   %0,256(%0)\n"
+		"1: ahi  %1,-256\n"
+		"   jnm  0b\n"
+		"   ex   %1,0(1)"
+                : "+&a" (addr), "+&a" (nr)
+                : "a" (codepage) : "cc", "memory", "1" );
+}
+
+#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr)
+#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr)
+#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr)
+#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr)
+#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr)
+#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr)
+
+#endif
+
diff --git a/include/asm-s390/elf.h b/include/asm-s390/elf.h
new file mode 100644
index 000000000000..3b8bd46832a1
--- /dev/null
+++ b/include/asm-s390/elf.h
@@ -0,0 +1,215 @@
+/*
+ *  include/asm-s390/elf.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/elf.h"
+ */
+
+#ifndef __ASMS390_ELF_H
+#define __ASMS390_ELF_H
+
+/* s390 relocations defined by the ABIs */
+#define R_390_NONE		0	/* No reloc.  */
+#define R_390_8			1	/* Direct 8 bit.  */
+#define R_390_12		2	/* Direct 12 bit.  */
+#define R_390_16		3	/* Direct 16 bit.  */
+#define R_390_32		4	/* Direct 32 bit.  */
+#define R_390_PC32		5	/* PC relative 32 bit.	*/
+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
+#define R_390_COPY		9	/* Copy symbol at runtime.  */
+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
+#define R_390_RELATIVE		12	/* Adjust by program base.  */
+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
+#define R_390_GOTPC		14	/* 32 bit PC rel. offset to GOT.  */
+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
+#define R_390_PC16		16	/* PC relative 16 bit.	*/
+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
+#define R_390_64		22	/* Direct 64 bit.  */
+#define R_390_PC64		23	/* PC relative 64 bit.	*/
+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code. */
+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
+                                           dynamic TLS code.  */
+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
+                                           dynamic TLS code.  */
+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.  */
+#define R_390_TLS_TPOFF		56	/* Negate offset in static TLS
+                                           block.  */
+#define R_390_20		57	/* Direct 20 bit.  */
+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
+					   block offset.  */
+/* Keep this the last entry.  */
+#define R_390_NUM	61
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/system.h>		/* for save_access_regs */
+
+
+typedef s390_fp_regs elf_fpregset_t;
+typedef s390_regs elf_gregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifndef __s390x__
+#define ELF_CLASS	ELFCLASS32
+#else /* __s390x__ */
+#define ELF_CLASS	ELFCLASS64
+#endif /* __s390x__ */
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_S390
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+         && (x)->e_ident[EI_CLASS] == ELF_CLASS) 
+
+/* For SVR4/S390 the function pointer to be registered with `atexit` is
+   passed in R14. */
+#define ELF_PLAT_INIT(_r, load_addr) \
+	do { \
+		_r->gprs[14] = 0; \
+	} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef __s390x__
+#define ELF_ET_DYN_BASE         ((TASK_SIZE & 0x80000000) \
+                                ? TASK_SIZE / 3 * 2 \
+                                : 2 * TASK_SIZE / 3)
+#else /* __s390x__ */
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+#endif /* __s390x__ */
+
+/* Wow, the "main" arch needs arch dependent functions too.. :) */
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+   now struct_user_regs, they are different) */
+
+static inline int dump_regs(struct pt_regs *ptregs, elf_gregset_t *regs)
+{
+	memcpy(&regs->psw, &ptregs->psw, sizeof(regs->psw)+sizeof(regs->gprs));
+	save_access_regs(regs->acrs);
+	regs->orig_gpr2 = ptregs->orig_gpr2;
+	return 1;
+}
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) dump_regs(regs, &pr_reg);
+
+static inline int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+	struct pt_regs *ptregs = __KSTK_PTREGS(tsk);
+	memcpy(&regs->psw, &ptregs->psw, sizeof(regs->psw)+sizeof(regs->gprs));
+	memcpy(regs->acrs, tsk->thread.acrs, sizeof(regs->acrs));
+	regs->orig_gpr2 = ptregs->orig_gpr2;
+	return 1;
+}
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, regs) dump_task_regs(tsk, regs)
+
+static inline int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
+{
+	if (tsk == current)
+		save_fp_regs(fpregs);
+	else
+		memcpy(fpregs, &tsk->thread.fp_regs, sizeof(elf_fpregset_t));
+	return 1;
+}
+
+#define ELF_CORE_COPY_FPREGS(tsk, fpregs) dump_task_fpu(tsk, fpregs)
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#ifndef __s390x__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#else /* __s390x__ */
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {							\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+	clear_thread_flag(TIF_31BIT);			\
+} while (0)
+#endif /* __s390x__ */
+#endif
+
+#endif
diff --git a/include/asm-s390/errno.h b/include/asm-s390/errno.h
new file mode 100644
index 000000000000..e41d5b37c4d6
--- /dev/null
+++ b/include/asm-s390/errno.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/errno.h
+ *
+ *  S390 version
+ *
+ */
+
+#ifndef _S390_ERRNO_H
+#define _S390_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-s390/extmem.h b/include/asm-s390/extmem.h
new file mode 100644
index 000000000000..c8802c934b74
--- /dev/null
+++ b/include/asm-s390/extmem.h
@@ -0,0 +1,32 @@
+/*
+ *  include/asm-s390x/extmem.h
+ *
+ *  definitions for external memory segment support
+ *  Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390X_DCSS_H
+#define _ASM_S390X_DCSS_H
+#ifndef __ASSEMBLY__
+
+/* possible values for segment type as returned by segment_info */
+#define SEG_TYPE_SW 0
+#define SEG_TYPE_EW 1
+#define SEG_TYPE_SR 2
+#define SEG_TYPE_ER 3
+#define SEG_TYPE_SN 4
+#define SEG_TYPE_EN 5
+#define SEG_TYPE_SC 6
+#define SEG_TYPE_EWEN 7
+
+#define SEGMENT_SHARED 0
+#define SEGMENT_EXCLUSIVE 1
+
+extern int segment_load (char *name,int segtype,unsigned long *addr,unsigned long *length);
+extern void segment_unload(char *name);
+extern void segment_save(char *name);
+extern int segment_type (char* name);
+extern int segment_modify_shared (char *name, int do_nonshared);
+
+#endif
+#endif
diff --git a/include/asm-s390/fcntl.h b/include/asm-s390/fcntl.h
new file mode 100644
index 000000000000..48f692b45732
--- /dev/null
+++ b/include/asm-s390/fcntl.h
@@ -0,0 +1,97 @@
+/*
+ *  include/asm-s390/fcntl.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/fcntl.h"
+ */
+#ifndef _S390_FCNTL_H
+#define _S390_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#ifndef __s390x__
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+#endif /* ! __s390x__ */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+#ifndef __s390x__
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+#endif
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
new file mode 100644
index 000000000000..6792c559a124
--- /dev/null
+++ b/include/asm-s390/hardirq.h
@@ -0,0 +1,38 @@
+/*
+ *  include/asm-s390/hardirq.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *
+ *  Derived from "include/asm-i386/hardirq.h"
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <asm/lowcore.h>
+
+/* irq_cpustat_t is unused currently, but could be converted
+ * into a percpu variable instead of storing softirq_pending
+ * on the lowcore */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#define local_softirq_pending() (S390_lowcore.softirq_pending)
+
+#define __ARCH_IRQ_STAT
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#define HARDIRQ_BITS	8
+
+extern void account_ticks(struct pt_regs *);
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/idals.h b/include/asm-s390/idals.h
new file mode 100644
index 000000000000..8038858b86bb
--- /dev/null
+++ b/include/asm-s390/idals.h
@@ -0,0 +1,257 @@
+/* 
+ * File...........: linux/include/asm-s390x/idals.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a
+ 
+ * History of changes
+ * 07/24/00 new file
+ * 05/04/02 code restructuring.
+ */
+
+#ifndef _S390_IDALS_H
+#define _S390_IDALS_H
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/cio.h>
+#include <asm/uaccess.h>
+
+#ifdef __s390x__
+#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */
+#else
+#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */
+#endif
+#define IDA_BLOCK_SIZE (1L<<IDA_SIZE_LOG)
+
+/*
+ * Test if an address/length pair needs an idal list.
+ */
+static inline int
+idal_is_needed(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	return ((__pa(vaddr) + length - 1) >> 31) != 0;
+#else
+	return 0;
+#endif
+}
+
+
+/*
+ * Return the number of idal words needed for an address/length pair.
+ */
+static inline unsigned int
+idal_nr_words(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	if (idal_is_needed(vaddr, length))
+		return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + 
+			(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+#endif
+	return 0;
+}
+
+/*
+ * Create the list of idal words for an address/length pair.
+ */
+static inline unsigned long *
+idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	unsigned long paddr;
+	unsigned int cidaw;
+
+	paddr = __pa(vaddr);
+	cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + 
+		 (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+	*idaws++ = paddr;
+	paddr &= -IDA_BLOCK_SIZE;
+	while (--cidaw > 0) {
+		paddr += IDA_BLOCK_SIZE;
+		*idaws++ = paddr;
+	}
+#endif
+	return idaws;
+}
+
+/*
+ * Sets the address of the data in CCW.
+ * If necessary it allocates an IDAL and sets the appropriate flags.
+ */
+static inline int
+set_normalized_cda(struct ccw1 * ccw, void *vaddr)
+{
+#ifdef __s390x__
+	unsigned int nridaws;
+	unsigned long *idal;
+
+	if (ccw->flags & CCW_FLAG_IDA)
+		return -EINVAL;
+	nridaws = idal_nr_words(vaddr, ccw->count);
+	if (nridaws > 0) {
+		idal = kmalloc(nridaws * sizeof(unsigned long),
+			       GFP_ATOMIC | GFP_DMA );
+		if (idal == NULL)
+			return -ENOMEM;
+		idal_create_words(idal, vaddr, ccw->count);
+		ccw->flags |= CCW_FLAG_IDA;
+		vaddr = idal;
+	}
+#endif
+	ccw->cda = (__u32)(unsigned long) vaddr;
+	return 0;
+}
+
+/*
+ * Releases any allocated IDAL related to the CCW.
+ */
+static inline void
+clear_normalized_cda(struct ccw1 * ccw)
+{
+#ifdef __s390x__
+	if (ccw->flags & CCW_FLAG_IDA) {
+		kfree((void *)(unsigned long) ccw->cda);
+		ccw->flags &= ~CCW_FLAG_IDA;
+	}
+#endif
+	ccw->cda = 0;
+}
+
+/*
+ * Idal buffer extension
+ */
+struct idal_buffer {
+	size_t size;
+	size_t page_order;
+	void *data[0];
+};
+
+/*
+ * Allocate an idal buffer
+ */
+static inline struct idal_buffer *
+idal_buffer_alloc(size_t size, int page_order)
+{
+	struct idal_buffer *ib;
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG;
+	ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *),
+		     GFP_DMA | GFP_KERNEL);
+	if (ib == NULL)
+		return ERR_PTR(-ENOMEM);
+	ib->size = size;
+	ib->page_order = page_order;
+	for (i = 0; i < nr_ptrs; i++) {
+		if ((i & (nr_chunks - 1)) != 0) {
+			ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE;
+			continue;
+		}
+		ib->data[i] = (void *)
+			__get_free_pages(GFP_KERNEL, page_order);
+		if (ib->data[i] != NULL)
+			continue;
+		// Not enough memory
+		while (i >= nr_chunks) {
+			i -= nr_chunks;
+			free_pages((unsigned long) ib->data[i],
+				   ib->page_order);
+		}
+		kfree(ib);
+		return ERR_PTR(-ENOMEM);
+	}
+	return ib;
+}
+
+/*
+ * Free an idal buffer.
+ */
+static inline void
+idal_buffer_free(struct idal_buffer *ib)
+{
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG;
+	for (i = 0; i < nr_ptrs; i += nr_chunks)
+		free_pages((unsigned long) ib->data[i], ib->page_order);
+	kfree(ib);
+}
+
+/*
+ * Test if a idal list is really needed.
+ */
+static inline int
+__idal_buffer_is_needed(struct idal_buffer *ib)
+{
+#ifdef __s390x__
+	return ib->size > (4096ul << ib->page_order) ||
+		idal_is_needed(ib->data[0], ib->size);
+#else
+	return ib->size > (4096ul << ib->page_order);
+#endif
+}
+
+/*
+ * Set channel data address to idal buffer.
+ */
+static inline void
+idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw)
+{
+	if (__idal_buffer_is_needed(ib)) {
+		// setup idals;
+		ccw->cda = (u32)(addr_t) ib->data;
+		ccw->flags |= CCW_FLAG_IDA;
+	} else
+		// we do not need idals - use direct addressing
+		ccw->cda = (u32)(addr_t) ib->data[0];
+	ccw->count = ib->size;
+}
+
+/*
+ * Copy count bytes from an idal buffer to user memory
+ */
+static inline size_t
+idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		to = (void __user *) to + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_to_user(to, ib->data[i], count);
+}
+
+/*
+ * Copy count bytes from user memory to an idal buffer
+ */
+static inline size_t
+idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		from = (void __user *) from + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_from_user(ib->data[i], from, count);
+}
+
+#endif
diff --git a/include/asm-s390/io.h b/include/asm-s390/io.h
new file mode 100644
index 000000000000..8188fdc9884f
--- /dev/null
+++ b/include/asm-s390/io.h
@@ -0,0 +1,123 @@
+/*
+ *  include/asm-s390/io.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/io.h"
+ */
+
+#ifndef _S390_IO_H
+#define _S390_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io_virt(x)            ((void *)(PAGE_OFFSET | (unsigned long)(x)))
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+	unsigned long real_address;
+	__asm__ (
+#ifndef __s390x__
+		 "   lra    %0,0(%1)\n"
+                 "   jz     0f\n"
+                 "   sr     %0,%0\n"
+#else /* __s390x__ */
+		 "   lrag   %0,0(%1)\n"
+                 "   jz     0f\n"
+                 "   slgr   %0,%0\n"
+#endif /* __s390x__ */
+                 "0:"
+                 : "=a" (real_address) : "a" (address) : "cc" );
+        return real_address;
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+        return __io_virt(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	((page - mem_map) << PAGE_SHIFT)
+
+extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+extern inline void * ioremap (unsigned long offset, unsigned long size)
+{
+        return __ioremap(offset, size, 0);
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern inline void * ioremap_nocache (unsigned long offset, unsigned long size)
+{
+        return __ioremap(offset, size, 0);
+}
+
+extern void iounmap(void *addr);
+
+/*
+ * IO bus memory addresses are also 1:1 with the physical address
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently.
+ */
+
+#define readb(addr) (*(volatile unsigned char *) __io_virt(addr))
+#define readw(addr) (*(volatile unsigned short *) __io_virt(addr))
+#define readl(addr) (*(volatile unsigned int *) __io_virt(addr))
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (*(volatile unsigned char *) __io_virt(addr) = (b))
+#define writew(b,addr) (*(volatile unsigned short *) __io_virt(addr) = (b))
+#define writel(b,addr) (*(volatile unsigned int *) __io_virt(addr) = (b))
+
+#define memset_io(a,b,c)        memset(__io_virt(a),(b),(c))
+#define memcpy_fromio(a,b,c)    memcpy((a),__io_virt(b),(c))
+#define memcpy_toio(a,b,c)      memcpy(__io_virt(a),(b),(c))
+
+#define inb_p(addr) readb(addr)
+#define inb(addr) readb(addr)
+
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outb_p(x,addr) outb(x,addr)
+
+#define mmiowb()
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-s390/ioctl.h b/include/asm-s390/ioctl.h
new file mode 100644
index 000000000000..df7394345ac4
--- /dev/null
+++ b/include/asm-s390/ioctl.h
@@ -0,0 +1,88 @@
+/*
+ *  include/asm-s390/ioctl.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ioctl.h"
+ */
+
+#ifndef _S390_IOCTL_H
+#define _S390_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned long __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _S390_IOCTL_H */
diff --git a/include/asm-s390/ioctls.h b/include/asm-s390/ioctls.h
new file mode 100644
index 000000000000..07e19b2dd73f
--- /dev/null
+++ b/include/asm-s390/ioctls.h
@@ -0,0 +1,88 @@
+/*
+ *  include/asm-s390/ioctls.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ioctls.h"
+ */
+
+#ifndef __ARCH_S390_IOCTLS_H__
+#define __ARCH_S390_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-s390/ipc.h b/include/asm-s390/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-s390/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-s390/ipcbuf.h b/include/asm-s390/ipcbuf.h
new file mode 100644
index 000000000000..37f293d12c8f
--- /dev/null
+++ b/include/asm-s390/ipcbuf.h
@@ -0,0 +1,31 @@
+#ifndef __S390_IPCBUF_H__
+#define __S390_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+#ifndef __s390x__
+	unsigned short		__pad2;
+#endif /* ! __s390x__ */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __S390_IPCBUF_H__ */
diff --git a/include/asm-s390/irq.h b/include/asm-s390/irq.h
new file mode 100644
index 000000000000..916a1aa0b073
--- /dev/null
+++ b/include/asm-s390/irq.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#ifdef __KERNEL__
+#include <linux/hardirq.h>
+
+/*
+ * the definition of irqs has changed in 2.5.46:
+ * NR_IRQS is no longer the number of i/o
+ * interrupts (65536), but rather the number
+ * of interrupt classes (2).
+ * Only external and i/o interrupts make much sense here (CH).
+ */
+
+enum interruption_class {
+	EXTERNAL_INTERRUPT,
+	IO_INTERRUPT,
+
+	NR_IRQS,
+};
+
+#define touch_nmi_watchdog() do { } while(0)
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* __KERNEL__ */
+#endif
+
diff --git a/include/asm-s390/kmap_types.h b/include/asm-s390/kmap_types.h
new file mode 100644
index 000000000000..fd1574648223
--- /dev/null
+++ b/include/asm-s390/kmap_types.h
@@ -0,0 +1,23 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,	
+	KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-s390/linkage.h b/include/asm-s390/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-s390/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-s390/local.h b/include/asm-s390/local.h
new file mode 100644
index 000000000000..cf8189009c30
--- /dev/null
+++ b/include/asm-s390/local.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <linux/config.h>
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+#ifndef __s390x__
+
+typedef atomic_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC_INIT(i)
+#define local_read(v)	atomic_read(v)
+#define local_set(v,i)	atomic_set(v,i)
+
+#define local_inc(v)	atomic_inc(v)
+#define local_dec(v)	atomic_dec(v)
+#define local_add(i, v)	atomic_add(i, v)
+#define local_sub(i, v)	atomic_sub(i, v)
+
+#else
+
+typedef atomic64_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC64_INIT(i)
+#define local_read(v)	atomic64_read(v)
+#define local_set(v,i)	atomic64_set(v,i)
+
+#define local_inc(v)	atomic64_inc(v)
+#define local_dec(v)	atomic64_dec(v)
+#define local_add(i, v)	atomic64_add(i, v)
+#define local_sub(i, v)	atomic64_sub(i, v)
+
+#endif
+
+#define __local_inc(v)		((v)->counter++)
+#define __local_dec(v)		((v)->counter--)
+#define __local_add(i,v)	((v)->counter+=(i))
+#define __local_sub(i,v)	((v)->counter-=(i))
+
+/*
+ * Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ASM_LOCAL_H */
diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h
new file mode 100644
index 000000000000..df5172fc589d
--- /dev/null
+++ b/include/asm-s390/lowcore.h
@@ -0,0 +1,351 @@
+/*
+ *  include/asm-s390/lowcore.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _ASM_S390_LOWCORE_H
+#define _ASM_S390_LOWCORE_H
+
+#ifndef __s390x__
+#define __LC_EXT_OLD_PSW                0x018
+#define __LC_SVC_OLD_PSW                0x020
+#define __LC_PGM_OLD_PSW                0x028
+#define __LC_MCK_OLD_PSW                0x030
+#define __LC_IO_OLD_PSW                 0x038
+#define __LC_EXT_NEW_PSW                0x058
+#define __LC_SVC_NEW_PSW                0x060
+#define __LC_PGM_NEW_PSW                0x068
+#define __LC_MCK_NEW_PSW                0x070
+#define __LC_IO_NEW_PSW                 0x078
+#else /* !__s390x__ */
+#define __LC_EXT_OLD_PSW                0x0130
+#define __LC_SVC_OLD_PSW                0x0140
+#define __LC_PGM_OLD_PSW                0x0150
+#define __LC_MCK_OLD_PSW                0x0160
+#define __LC_IO_OLD_PSW                 0x0170
+#define __LC_EXT_NEW_PSW                0x01b0
+#define __LC_SVC_NEW_PSW                0x01c0
+#define __LC_PGM_NEW_PSW                0x01d0
+#define __LC_MCK_NEW_PSW                0x01e0
+#define __LC_IO_NEW_PSW                 0x01f0
+#endif /* !__s390x__ */
+
+#define __LC_EXT_PARAMS                 0x080
+#define __LC_CPU_ADDRESS                0x084
+#define __LC_EXT_INT_CODE               0x086
+
+#define __LC_SVC_ILC                    0x088
+#define __LC_SVC_INT_CODE               0x08A
+#define __LC_PGM_ILC                    0x08C
+#define __LC_PGM_INT_CODE               0x08E
+
+#define __LC_PER_ATMID			0x096
+#define __LC_PER_ADDRESS		0x098
+#define __LC_PER_ACCESS_ID		0x0A1
+
+#define __LC_SUBCHANNEL_ID              0x0B8
+#define __LC_SUBCHANNEL_NR              0x0BA
+#define __LC_IO_INT_PARM                0x0BC
+#define __LC_IO_INT_WORD                0x0C0
+#define __LC_MCCK_CODE                  0x0E8
+
+#define __LC_RETURN_PSW                 0x200
+
+#define __LC_SAVE_AREA                  0xC00
+
+#ifndef __s390x__
+#define __LC_IRB			0x208
+#define __LC_SYNC_ENTER_TIMER		0x248
+#define __LC_ASYNC_ENTER_TIMER		0x250
+#define __LC_EXIT_TIMER			0x258
+#define __LC_LAST_UPDATE_TIMER		0x260
+#define __LC_USER_TIMER			0x268
+#define __LC_SYSTEM_TIMER		0x270
+#define __LC_LAST_UPDATE_CLOCK		0x278
+#define __LC_STEAL_CLOCK		0x280
+#define __LC_KERNEL_STACK               0xC40
+#define __LC_THREAD_INFO		0xC44
+#define __LC_ASYNC_STACK                0xC48
+#define __LC_KERNEL_ASCE		0xC4C
+#define __LC_USER_ASCE			0xC50
+#define __LC_PANIC_STACK                0xC54
+#define __LC_CPUID                      0xC60
+#define __LC_CPUADDR                    0xC68
+#define __LC_IPLDEV                     0xC7C
+#define __LC_JIFFY_TIMER		0xC80
+#define __LC_CURRENT			0xC90
+#define __LC_INT_CLOCK			0xC98
+#else /* __s390x__ */
+#define __LC_IRB			0x210
+#define __LC_SYNC_ENTER_TIMER		0x250
+#define __LC_ASYNC_ENTER_TIMER		0x258
+#define __LC_EXIT_TIMER			0x260
+#define __LC_LAST_UPDATE_TIMER		0x268
+#define __LC_USER_TIMER			0x270
+#define __LC_SYSTEM_TIMER		0x278
+#define __LC_LAST_UPDATE_CLOCK		0x280
+#define __LC_STEAL_CLOCK		0x288
+#define __LC_DIAG44_OPCODE		0x290
+#define __LC_KERNEL_STACK               0xD40
+#define __LC_THREAD_INFO		0xD48
+#define __LC_ASYNC_STACK                0xD50
+#define __LC_KERNEL_ASCE		0xD58
+#define __LC_USER_ASCE			0xD60
+#define __LC_PANIC_STACK                0xD68
+#define __LC_CPUID                      0xD90
+#define __LC_CPUADDR                    0xD98
+#define __LC_IPLDEV                     0xDB8
+#define __LC_JIFFY_TIMER		0xDC0
+#define __LC_CURRENT			0xDD8
+#define __LC_INT_CLOCK			0xDE8
+#endif /* __s390x__ */
+
+#define __LC_PANIC_MAGIC                0xE00
+
+#ifndef __s390x__
+#define __LC_PFAULT_INTPARM             0x080
+#define __LC_AREGS_SAVE_AREA            0x120
+#define __LC_CREGS_SAVE_AREA            0x1C0
+#else /* __s390x__ */
+#define __LC_PFAULT_INTPARM             0x11B8
+#define __LC_AREGS_SAVE_AREA            0x1340
+#define __LC_CREGS_SAVE_AREA            0x1380
+#endif /* __s390x__ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <linux/types.h>
+#include <asm/sigp.h>
+
+void restart_int_handler(void);
+void ext_int_handler(void);
+void system_call(void);
+void pgm_check_handler(void);
+void mcck_int_handler(void);
+void io_int_handler(void);
+
+struct _lowcore
+{
+#ifndef __s390x__
+        /* prefix area: defined by architecture */
+	psw_t        restart_psw;              /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	psw_t        external_old_psw;         /* 0x018 */
+	psw_t        svc_old_psw;              /* 0x020 */
+	psw_t        program_old_psw;          /* 0x028 */
+	psw_t        mcck_old_psw;             /* 0x030 */
+	psw_t        io_old_psw;               /* 0x038 */
+	__u8         pad1[0x58-0x40];          /* 0x040 */
+	psw_t        external_new_psw;         /* 0x058 */
+	psw_t        svc_new_psw;              /* 0x060 */
+	psw_t        program_new_psw;          /* 0x068 */
+	psw_t        mcck_new_psw;             /* 0x070 */
+	psw_t        io_new_psw;               /* 0x078 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        trans_exc_code;           /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	__u32        per_address;              /* 0x098 */
+	__u32        monitor_code;             /* 0x09c */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         pad2[0xB8-0xA2];          /* 0x0a2 */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+        __u8         pad3[0xD8-0xC4];          /* 0x0c4 */
+	__u32        cpu_timer_save_area[2];   /* 0x0d8 */
+	__u32        clock_comp_save_area[2];  /* 0x0e0 */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8         pad4[0xf4-0xf0];          /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	__u32        failing_storage_address;  /* 0x0f8 */
+	__u8         pad5[0x100-0xfc];         /* 0x0fc */
+	__u32        st_status_fixed_logout[4];/* 0x100 */
+	__u8         pad6[0x120-0x110];        /* 0x110 */
+	__u32        access_regs_save_area[16];/* 0x120 */
+	__u32        floating_pt_save_area[8]; /* 0x160 */
+	__u32        gpregs_save_area[16];     /* 0x180 */
+	__u32        cregs_save_area[16];      /* 0x1c0 */	
+
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x208 */
+	__u64        sync_enter_timer;         /* 0x248 */
+	__u64        async_enter_timer;        /* 0x250 */
+	__u64        exit_timer;               /* 0x258 */
+	__u64        last_update_timer;        /* 0x260 */
+	__u64        user_timer;               /* 0x268 */
+	__u64        system_timer;             /* 0x270 */
+	__u64        last_update_clock;        /* 0x278 */
+	__u64        steal_clock;              /* 0x280 */
+	__u8         pad8[0xc00-0x288];        /* 0x288 */
+
+        /* System info area */
+	__u32        save_area[16];            /* 0xc00 */
+	__u32        kernel_stack;             /* 0xc40 */
+	__u32        thread_info;              /* 0xc44 */
+	__u32        async_stack;              /* 0xc48 */
+	__u32        kernel_asce;              /* 0xc4c */
+	__u32        user_asce;                /* 0xc50 */
+	__u32        panic_stack;              /* 0xc54 */
+	__u8         pad10[0xc60-0xc58];       /* 0xc58 */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xc60 */
+	__u32        ipl_device;               /* 0xc7c */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+        __u64        jiffy_timer;              /* 0xc80 */
+	__u32        ext_call_fast;            /* 0xc88 */
+	__u32        percpu_offset;            /* 0xc8c */
+	__u32        current_task;	       /* 0xc90 */
+	__u32        softirq_pending;	       /* 0xc94 */
+	__u64        int_clock;                /* 0xc98 */
+        __u8         pad11[0xe00-0xca0];       /* 0xca0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+        /* Align to the top 1k of prefix area */
+	__u8         pad12[0x1000-0xe04];      /* 0xe04 */
+#else /* !__s390x__ */
+        /* prefix area: defined by architecture */
+	__u32        ccw1[2];                  /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	__u8         pad1[0x80-0x18];          /* 0x018 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        data_exc_code;            /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	addr_t       per_address;              /* 0x098 */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         op_access_id;             /* 0x0a2 */
+	__u8         ar_access_id;             /* 0x0a3 */
+	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
+	addr_t       trans_exc_code;           /* 0x0A0 */
+	addr_t       monitor_code;             /* 0x09c */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+	__u8         pad3[0xc8-0xc4];          /* 0x0c4 */
+	__u32        stfl_fac_list;            /* 0x0c8 */
+	__u8         pad4[0xe8-0xcc];          /* 0x0cc */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8         pad5[0xf4-0xf0];          /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	addr_t       failing_storage_address;  /* 0x0f8 */
+	__u8         pad6[0x120-0x100];        /* 0x100 */
+	psw_t        restart_old_psw;          /* 0x120 */
+	psw_t        external_old_psw;         /* 0x130 */
+	psw_t        svc_old_psw;              /* 0x140 */
+	psw_t        program_old_psw;          /* 0x150 */
+	psw_t        mcck_old_psw;             /* 0x160 */
+	psw_t        io_old_psw;               /* 0x170 */
+	__u8         pad7[0x1a0-0x180];        /* 0x180 */
+	psw_t        restart_psw;              /* 0x1a0 */
+	psw_t        external_new_psw;         /* 0x1b0 */
+	psw_t        svc_new_psw;              /* 0x1c0 */
+	psw_t        program_new_psw;          /* 0x1d0 */
+	psw_t        mcck_new_psw;             /* 0x1e0 */
+	psw_t        io_new_psw;               /* 0x1f0 */
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x210 */
+	__u64        sync_enter_timer;         /* 0x250 */
+	__u64        async_enter_timer;        /* 0x258 */
+	__u64        exit_timer;               /* 0x260 */
+	__u64        last_update_timer;        /* 0x268 */
+	__u64        user_timer;               /* 0x270 */
+	__u64        system_timer;             /* 0x278 */
+	__u64        last_update_clock;        /* 0x280 */
+	__u64        steal_clock;              /* 0x288 */
+	__u32        diag44_opcode;            /* 0x290 */
+        __u8         pad8[0xc00-0x294];        /* 0x294 */
+        /* System info area */
+	__u64        save_area[16];            /* 0xc00 */
+        __u8         pad9[0xd40-0xc80];        /* 0xc80 */
+ 	__u64        kernel_stack;             /* 0xd40 */
+	__u64        thread_info;              /* 0xd48 */
+	__u64        async_stack;              /* 0xd50 */
+	__u64        kernel_asce;              /* 0xd58 */
+	__u64        user_asce;                /* 0xd60 */
+	__u64        panic_stack;              /* 0xd68 */
+	__u8         pad10[0xd80-0xd70];       /* 0xd70 */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xd80 */
+	__u32        ipl_device;               /* 0xdb8 */
+	__u32        pad11;                    /* 0xdbc */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+        __u64        jiffy_timer;              /* 0xdc0 */
+	__u64        ext_call_fast;            /* 0xdc8 */
+	__u64        percpu_offset;            /* 0xdd0 */
+	__u64        current_task;	       /* 0xdd8 */
+	__u64        softirq_pending;	       /* 0xde0 */
+	__u64        int_clock;                /* 0xde8 */
+        __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+	__u8         pad13[0x1200-0xe04];      /* 0xe04 */
+
+        /* System info area */ 
+
+	__u64        floating_pt_save_area[16]; /* 0x1200 */
+	__u64        gpregs_save_area[16];      /* 0x1280 */
+	__u32        st_status_fixed_logout[4]; /* 0x1300 */
+	__u8         pad14[0x1318-0x1310];      /* 0x1310 */
+	__u32        prefixreg_save_area;       /* 0x1318 */
+	__u32        fpt_creg_save_area;        /* 0x131c */
+	__u8         pad15[0x1324-0x1320];      /* 0x1320 */
+	__u32        tod_progreg_save_area;     /* 0x1324 */
+	__u32        cpu_timer_save_area[2];    /* 0x1328 */
+	__u32        clock_comp_save_area[2];   /* 0x1330 */
+	__u8         pad16[0x1340-0x1338];      /* 0x1338 */ 
+	__u32        access_regs_save_area[16]; /* 0x1340 */ 
+	__u64        cregs_save_area[16];       /* 0x1380 */
+
+	/* align to the top of the prefix area */
+
+	__u8         pad17[0x2000-0x1400];      /* 0x1400 */
+#endif /* !__s390x__ */
+} __attribute__((packed)); /* End structure*/
+
+#define S390_lowcore (*((struct _lowcore *) 0))
+extern struct _lowcore *lowcore_ptr[];
+
+extern __inline__ void set_prefix(__u32 address)
+{
+        __asm__ __volatile__ ("spx %0" : : "m" (address) : "memory" );
+}
+
+#define __PANIC_MAGIC           0xDEADC0DE
+
+#endif
+
+#endif
diff --git a/include/asm-s390/mathemu.h b/include/asm-s390/mathemu.h
new file mode 100644
index 000000000000..e8dd1ba8edb0
--- /dev/null
+++ b/include/asm-s390/mathemu.h
@@ -0,0 +1,29 @@
+/*
+ *  arch/s390/kernel/mathemu.h
+ *    IEEE floating point emulation.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef __MATHEMU__
+#define __MATHEMU__
+
+extern int math_emu_b3(__u8 *, struct pt_regs *);
+extern int math_emu_ed(__u8 *, struct pt_regs *);
+extern int math_emu_ldr(__u8 *);
+extern int math_emu_ler(__u8 *);
+extern int math_emu_std(__u8 *, struct pt_regs *);
+extern int math_emu_ld(__u8 *, struct pt_regs *);
+extern int math_emu_ste(__u8 *, struct pt_regs *);
+extern int math_emu_le(__u8 *, struct pt_regs *);
+extern int math_emu_lfpc(__u8 *, struct pt_regs *);
+extern int math_emu_stfpc(__u8 *, struct pt_regs *);
+extern int math_emu_srnm(__u8 *, struct pt_regs *);
+
+#endif                                 /* __MATHEMU__                      */
+
+
+
+
diff --git a/include/asm-s390/mman.h b/include/asm-s390/mman.h
new file mode 100644
index 000000000000..ea86bd12204f
--- /dev/null
+++ b/include/asm-s390/mman.h
@@ -0,0 +1,51 @@
+/*
+ *  include/asm-s390/mman.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mman.h"
+ */
+
+#ifndef __S390_MMAN_H__
+#define __S390_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL    0x0              /* default page-in behavior */
+#define MADV_RANDOM    0x1              /* page-in minimum required */
+#define MADV_SEQUENTIAL        0x2             /* read-ahead aggressively */
+#define MADV_WILLNEED  0x3              /* pre-fault pages */
+#define MADV_DONTNEED  0x4              /* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __S390_MMAN_H__ */
diff --git a/include/asm-s390/mmu.h b/include/asm-s390/mmu.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/include/asm-s390/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-s390/mmu_context.h b/include/asm-s390/mmu_context.h
new file mode 100644
index 000000000000..3a3bb3f2dad5
--- /dev/null
+++ b/include/asm-s390/mmu_context.h
@@ -0,0 +1,54 @@
+/*
+ *  include/asm-s390/mmu_context.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mmu_context.h"
+ */
+
+#ifndef __S390_MMU_CONTEXT_H
+#define __S390_MMU_CONTEXT_H
+
+/*
+ * get a new mmu context.. S390 don't know about contexts.
+ */
+#define init_new_context(tsk,mm)        0
+
+#define destroy_context(mm)             do { } while (0)
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+                                  struct task_struct *tsk)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+        if (prev != next) {
+#ifndef __s390x__
+	        S390_lowcore.user_asce = (__pa(next->pgd)&PAGE_MASK) |
+                      (_SEGMENT_TABLE|USER_STD_MASK);
+                /* Load home space page table origin. */
+                asm volatile("lctl  13,13,%0"
+			     : : "m" (S390_lowcore.user_asce) );
+#else /* __s390x__ */
+                S390_lowcore.user_asce = (__pa(next->pgd) & PAGE_MASK) |
+			(_REGION_TABLE|USER_STD_MASK);
+		/* Load home space page table origin. */
+		asm volatile("lctlg  13,13,%0"
+			     : : "m" (S390_lowcore.user_asce) );
+#endif /* __s390x__ */
+        }
+	cpu_set(smp_processor_id(), next->cpu_vm_mask);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+extern inline void activate_mm(struct mm_struct *prev,
+                               struct mm_struct *next)
+{
+        switch_mm(prev, next, current);
+	set_fs(current->thread.mm_segment);
+}
+
+#endif
diff --git a/include/asm-s390/module.h b/include/asm-s390/module.h
new file mode 100644
index 000000000000..1cc1c5af705a
--- /dev/null
+++ b/include/asm-s390/module.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_S390_MODULE_H
+#define _ASM_S390_MODULE_H
+/*
+ * This file contains the s390 architecture specific module code.
+ */
+
+struct mod_arch_syminfo
+{
+	unsigned long got_offset;
+	unsigned long plt_offset;
+	int got_initialized;
+	int plt_initialized;
+};
+
+struct mod_arch_specific
+{
+	/* Starting offset of got in the module core memory. */
+	unsigned long got_offset;
+	/* Starting offset of plt in the module core memory. */
+	unsigned long plt_offset;
+	/* Size of the got. */
+	unsigned long got_size;
+	/* Size of the plt. */
+	unsigned long plt_size;
+	/* Number of symbols in syminfo. */
+	int nsyms;
+	/* Additional symbol information (got and plt offsets). */
+	struct mod_arch_syminfo *syminfo;
+};
+
+#ifdef __s390x__
+#define ElfW(x) Elf64_ ## x
+#define ELFW(x) ELF64_ ## x
+#else
+#define ElfW(x) Elf32_ ## x
+#define ELFW(x) ELF32_ ## x
+#endif
+
+#define Elf_Addr ElfW(Addr)
+#define Elf_Rela ElfW(Rela)
+#define Elf_Shdr ElfW(Shdr)
+#define Elf_Sym ElfW(Sym)
+#define Elf_Ehdr ElfW(Ehdr)
+#define ELF_R_SYM ELFW(R_SYM)
+#define ELF_R_TYPE ELFW(R_TYPE)
+#endif /* _ASM_S390_MODULE_H */
diff --git a/include/asm-s390/msgbuf.h b/include/asm-s390/msgbuf.h
new file mode 100644
index 000000000000..1bbdee927924
--- /dev/null
+++ b/include/asm-s390/msgbuf.h
@@ -0,0 +1,37 @@
+#ifndef _S390_MSGBUF_H
+#define _S390_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused3;
+#endif /* ! __s390x__ */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _S390_MSGBUF_H */
diff --git a/include/asm-s390/namei.h b/include/asm-s390/namei.h
new file mode 100644
index 000000000000..3e286bdde4b0
--- /dev/null
+++ b/include/asm-s390/namei.h
@@ -0,0 +1,21 @@
+/*
+ *  include/asm-s390/namei.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/namei.h"
+ *
+ *  Included from linux/fs/namei.c
+ */
+
+#ifndef __S390_NAMEI_H
+#define __S390_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __S390_NAMEI_H */
diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h
new file mode 100644
index 000000000000..614e2a93c703
--- /dev/null
+++ b/include/asm-s390/page.h
@@ -0,0 +1,208 @@
+/*
+ *  include/asm-s390/page.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ */
+
+#ifndef _S390_PAGE_H
+#define _S390_PAGE_H
+
+#include <asm/setup.h>
+#include <asm/types.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      12
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#ifndef __s390x__
+
+static inline void clear_page(void *page)
+{
+	register_pair rp;
+
+	rp.subreg.even = (unsigned long) page;
+	rp.subreg.odd = (unsigned long) 4096;
+        asm volatile ("   slr  1,1\n"
+		      "   mvcl %0,0"
+		      : "+&a" (rp) : : "memory", "cc", "1" );
+}
+
+static inline void copy_page(void *to, void *from)
+{
+        if (MACHINE_HAS_MVPG)
+		asm volatile ("   sr   0,0\n"
+			      "   mvpg %0,%1"
+			      : : "a" ((void *)(to)), "a" ((void *)(from))
+			      : "memory", "cc", "0" );
+	else
+		asm volatile ("   mvc  0(256,%0),0(%1)\n"
+			      "   mvc  256(256,%0),256(%1)\n"
+			      "   mvc  512(256,%0),512(%1)\n"
+			      "   mvc  768(256,%0),768(%1)\n"
+			      "   mvc  1024(256,%0),1024(%1)\n"
+			      "   mvc  1280(256,%0),1280(%1)\n"
+			      "   mvc  1536(256,%0),1536(%1)\n"
+			      "   mvc  1792(256,%0),1792(%1)\n"
+			      "   mvc  2048(256,%0),2048(%1)\n"
+			      "   mvc  2304(256,%0),2304(%1)\n"
+			      "   mvc  2560(256,%0),2560(%1)\n"
+			      "   mvc  2816(256,%0),2816(%1)\n"
+			      "   mvc  3072(256,%0),3072(%1)\n"
+			      "   mvc  3328(256,%0),3328(%1)\n"
+			      "   mvc  3584(256,%0),3584(%1)\n"
+			      "   mvc  3840(256,%0),3840(%1)\n"
+			      : : "a"((void *)(to)),"a"((void *)(from)) 
+			      : "memory" );
+}
+
+#else /* __s390x__ */
+
+static inline void clear_page(void *page)
+{
+        asm volatile ("   lgr  2,%0\n"
+                      "   lghi 3,4096\n"
+                      "   slgr 1,1\n"
+                      "   mvcl 2,0"
+                      : : "a" ((void *) (page))
+		      : "memory", "cc", "1", "2", "3" );
+}
+
+static inline void copy_page(void *to, void *from)
+{
+        if (MACHINE_HAS_MVPG)
+		asm volatile ("   sgr  0,0\n"
+			      "   mvpg %0,%1"
+			      : : "a" ((void *)(to)), "a" ((void *)(from))
+			      : "memory", "cc", "0" );
+	else
+		asm volatile ("   mvc  0(256,%0),0(%1)\n"
+			      "   mvc  256(256,%0),256(%1)\n"
+			      "   mvc  512(256,%0),512(%1)\n"
+			      "   mvc  768(256,%0),768(%1)\n"
+			      "   mvc  1024(256,%0),1024(%1)\n"
+			      "   mvc  1280(256,%0),1280(%1)\n"
+			      "   mvc  1536(256,%0),1536(%1)\n"
+			      "   mvc  1792(256,%0),1792(%1)\n"
+			      "   mvc  2048(256,%0),2048(%1)\n"
+			      "   mvc  2304(256,%0),2304(%1)\n"
+			      "   mvc  2560(256,%0),2560(%1)\n"
+			      "   mvc  2816(256,%0),2816(%1)\n"
+			      "   mvc  3072(256,%0),3072(%1)\n"
+			      "   mvc  3328(256,%0),3328(%1)\n"
+			      "   mvc  3584(256,%0),3584(%1)\n"
+			      "   mvc  3840(256,%0),3840(%1)\n"
+			      : : "a"((void *)(to)),"a"((void *)(from)) 
+			      : "memory" );
+}
+
+#endif /* __s390x__ */
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+        int order;
+
+        size = (size-1) >> (PAGE_SHIFT-1);
+        order = -1;
+        do {
+                size >>= 1;
+                order++;
+        } while (size);
+        return order;
+}
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pte; } pte_t;
+
+#define pte_val(x)      ((x).pte)
+#define pgprot_val(x)   ((x).pgprot)
+
+#ifndef __s390x__
+
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct {
+        unsigned long pgd0;
+        unsigned long pgd1;
+        unsigned long pgd2;
+        unsigned long pgd3;
+        } pgd_t;
+
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)      ((x).pgd0)
+
+#else /* __s390x__ */
+
+typedef struct { 
+        unsigned long pmd0;
+        unsigned long pmd1; 
+        } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+
+#define pmd_val(x)      ((x).pmd0)
+#define pmd_val1(x)     ((x).pmd1)
+#define pgd_val(x)      ((x).pgd)
+
+#endif /* __s390x__ */
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+/* default storage key used for all pages */
+extern unsigned int default_storage_key;
+
+static inline void
+page_set_storage_key(unsigned long addr, unsigned int skey)
+{
+	asm volatile ( "sske %0,%1" : : "d" (skey), "a" (addr) );
+}
+
+static inline unsigned int
+page_get_storage_key(unsigned long addr)
+{
+	unsigned int skey;
+
+	asm volatile ( "iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0) );
+
+	return skey;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)        (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#define __PAGE_OFFSET           0x0UL
+#define PAGE_OFFSET             0x0UL
+#define __pa(x)                 (unsigned long)(x)
+#define __va(x)                 (void *)(unsigned long)(x)
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _S390_PAGE_H */
diff --git a/include/asm-s390/param.h b/include/asm-s390/param.h
new file mode 100644
index 000000000000..085a7e229b23
--- /dev/null
+++ b/include/asm-s390/param.h
@@ -0,0 +1,30 @@
+/*
+ *  include/asm-s390/param.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/param.h"
+ */
+
+#ifndef _ASMS390_PARAM_H
+#define _ASMS390_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		100		/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-s390/pci.h b/include/asm-s390/pci.h
new file mode 100644
index 000000000000..42a145c9ddd6
--- /dev/null
+++ b/include/asm-s390/pci.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_S390_PCI_H
+#define __ASM_S390_PCI_H
+
+/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code
+ * includes it even if CONFIG_PCI is not set.
+ */
+#define PCI_DMA_BUS_IS_PHYS (0)
+
+#endif /* __ASM_S390_PCI_H */
+
diff --git a/include/asm-s390/percpu.h b/include/asm-s390/percpu.h
new file mode 100644
index 000000000000..123fcaca295e
--- /dev/null
+++ b/include/asm-s390/percpu.h
@@ -0,0 +1,70 @@
+#ifndef __ARCH_S390_PERCPU__
+#define __ARCH_S390_PERCPU__
+
+#include <linux/compiler.h>
+#include <asm/lowcore.h>
+
+#define __GENERIC_PER_CPU
+
+/*
+ * s390 uses its own implementation for per cpu data, the offset of
+ * the cpu local data area is cached in the cpu's lowcore memory.
+ * For 64 bit module code s390 forces the use of a GOT slot for the
+ * address of the per cpu variable. This is needed because the module
+ * may be more than 4G above the per cpu area.
+ */
+#if defined(__s390x__) && defined(MODULE)
+
+#define __reloc_hide(var,offset) \
+  (*({ unsigned long *__ptr; \
+       asm ( "larl %0,per_cpu__"#var"@GOTENT" \
+             : "=a" (__ptr) : "X" (per_cpu__##var) ); \
+       (typeof(&per_cpu__##var))((*__ptr) + (offset)); }))
+
+#else
+
+#define __reloc_hide(var, offset) \
+  (*({ unsigned long __ptr; \
+       asm ( "" : "=a" (__ptr) : "0" (&per_cpu__##var) ); \
+       (typeof(&per_cpu__##var)) (__ptr + (offset)); }))
+
+#endif
+
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+    __attribute__((__section__(".data.percpu"))) \
+    __typeof__(type) per_cpu__##name
+
+#define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
+#define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size)			\
+do {								\
+	unsigned int __i;					\
+	for (__i = 0; __i < NR_CPUS; __i++)			\
+		if (cpu_possible(__i))				\
+			memcpy((pcpudst)+__per_cpu_offset[__i],	\
+			       (src), (size));			\
+} while (0)
+
+#else /* ! SMP */
+
+#define DEFINE_PER_CPU(type, name) \
+    __typeof__(type) per_cpu__##name
+
+#define __get_cpu_var(var) __reloc_hide(var,0)
+#define per_cpu(var,cpu) __reloc_hide(var,0)
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+#endif /* __ARCH_S390_PERCPU__ */
diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h
new file mode 100644
index 000000000000..3417dd71ab43
--- /dev/null
+++ b/include/asm-s390/pgalloc.h
@@ -0,0 +1,168 @@
+/*
+ *  include/asm-s390/pgalloc.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgalloc.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+#ifndef _S390_PGALLOC_H
+#define _S390_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/gfp.h>
+#include <linux/mm.h>
+
+#define check_pgt_cache()	do {} while (0)
+
+extern void diag10(unsigned long addr);
+
+/*
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd;
+	int i;
+
+#ifndef __s390x__
+	pgd = (pgd_t *) __get_free_pages(GFP_KERNEL,1);
+        if (pgd != NULL)
+		for (i = 0; i < USER_PTRS_PER_PGD; i++)
+			pmd_clear(pmd_offset(pgd + i, i*PGDIR_SIZE));
+#else /* __s390x__ */
+	pgd = (pgd_t *) __get_free_pages(GFP_KERNEL,2);
+        if (pgd != NULL)
+		for (i = 0; i < PTRS_PER_PGD; i++)
+			pgd_clear(pgd + i);
+#endif /* __s390x__ */
+	return pgd;
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+#ifndef __s390x__
+        free_pages((unsigned long) pgd, 1);
+#else /* __s390x__ */
+        free_pages((unsigned long) pgd, 2);
+#endif /* __s390x__ */
+}
+
+#ifndef __s390x__
+/*
+ * page middle directory allocation/free routines.
+ * We use pmd cache only on s390x, so these are dummy routines. This
+ * code never triggers because the pgd will always be present.
+ */
+#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)                     do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)      BUG()
+#else /* __s390x__ */
+static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
+{
+	pmd_t *pmd;
+        int i;
+
+	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL, 2);
+	if (pmd != NULL) {
+		for (i=0; i < PTRS_PER_PMD; i++)
+			pmd_clear(pmd+i);
+	}
+	return pmd;
+}
+
+static inline void pmd_free (pmd_t *pmd)
+{
+	free_pages((unsigned long) pmd, 2);
+}
+
+#define __pmd_free_tlb(tlb,pmd)			\
+	do {					\
+		tlb_flush_mmu(tlb, 0, 0);	\
+		pmd_free(pmd);			\
+	 } while (0)
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	pgd_val(*pgd) = _PGD_ENTRY | __pa(pmd);
+}
+
+#endif /* __s390x__ */
+
+static inline void 
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+#ifndef __s390x__
+	pmd_val(pmd[0]) = _PAGE_TABLE + __pa(pte);
+	pmd_val(pmd[1]) = _PAGE_TABLE + __pa(pte+256);
+	pmd_val(pmd[2]) = _PAGE_TABLE + __pa(pte+512);
+	pmd_val(pmd[3]) = _PAGE_TABLE + __pa(pte+768);
+#else /* __s390x__ */
+	pmd_val(*pmd) = _PMD_ENTRY + __pa(pte);
+	pmd_val1(*pmd) = _PMD_ENTRY + __pa(pte+256);
+#endif /* __s390x__ */
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+{
+	pmd_populate_kernel(mm, pmd, (pte_t *)((page-mem_map) << PAGE_SHIFT));
+}
+
+/*
+ * page table entry allocation/free routines.
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long vmaddr)
+{
+	pte_t *pte;
+        int i;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+	if (pte != NULL) {
+		for (i=0; i < PTRS_PER_PTE; i++) {
+			pte_clear(mm, vmaddr, pte+i);
+			vmaddr += PAGE_SIZE;
+		}
+	}
+	return pte;
+}
+
+static inline struct page *
+pte_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
+{
+	pte_t *pte = pte_alloc_one_kernel(mm, vmaddr);
+	if (pte)
+		return virt_to_page(pte);
+	return 0;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+        free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+        __free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page(tlb,pte)
+
+/*
+ * This establishes kernel virtual mappings (e.g., as a result of a
+ * vmalloc call).  Since s390-esame uses a separate kernel page table,
+ * there is nothing to do here... :)
+ */
+#define set_pgdir(addr,entry) do { } while(0)
+
+#endif /* _S390_PGALLOC_H */
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
new file mode 100644
index 000000000000..1633cb75f057
--- /dev/null
+++ b/include/asm-s390/pgtable.h
@@ -0,0 +1,813 @@
+/*
+ *  include/asm-s390/pgtable.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Ulrich Weigand (weigand@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgtable.h"
+ */
+
+#ifndef _ASM_S390_PGTABLE_H
+#define _ASM_S390_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * The Linux memory management assumes a three-level page table setup. For
+ * s390 31 bit we "fold" the mid level into the top-level page table, so
+ * that we physically have the same two-level page table as the s390 mmu
+ * expects in 31 bit mode. For s390 64 bit we use three of the five levels
+ * the hardware provides (region first and region second tables are not
+ * used).
+ *
+ * The "pgd_xxx()" functions are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the S390 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/bug.h>
+#include <asm/processor.h>
+#include <linux/threads.h>
+
+struct vm_area_struct; /* forward declaration (include/linux/mm.h) */
+
+extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
+extern void paging_init(void);
+
+/*
+ * The S390 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+#define update_mmu_cache(vma, address, pte)     do { } while (0)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#ifndef __s390x__
+# define PMD_SHIFT	22
+# define PGDIR_SHIFT	22
+#else /* __s390x__ */
+# define PMD_SHIFT	21
+# define PGDIR_SHIFT	31
+#endif /* __s390x__ */
+
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PMD_MASK        (~(PMD_SIZE-1))
+#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK      (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the S390 is two-level, so
+ * we don't really have any PMD directory physically.
+ * for S390 segment-table entries are combined to one PGD
+ * that leads to 1024 pte per pgd
+ */
+#ifndef __s390x__
+# define PTRS_PER_PTE    1024
+# define PTRS_PER_PMD    1
+# define PTRS_PER_PGD    512
+#else /* __s390x__ */
+# define PTRS_PER_PTE    512
+# define PTRS_PER_PMD    1024
+# define PTRS_PER_PGD    2048
+#endif /* __s390x__ */
+
+/*
+ * pgd entries used up by user/kernel:
+ */
+#ifndef __s390x__
+# define USER_PTRS_PER_PGD  512
+# define USER_PGD_PTRS      512
+# define KERNEL_PGD_PTRS    512
+# define FIRST_USER_PGD_NR  0
+#else /* __s390x__ */
+# define USER_PTRS_PER_PGD  2048
+# define USER_PGD_PTRS      2048
+# define KERNEL_PGD_PTRS    2048
+# define FIRST_USER_PGD_NR  0
+#endif /* __s390x__ */
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e))
+
+#ifndef __ASSEMBLY__
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET  (8*1024*1024)
+#define VMALLOC_START   (((unsigned long) high_memory + VMALLOC_OFFSET) \
+			 & ~(VMALLOC_OFFSET-1))
+#ifndef __s390x__
+# define VMALLOC_END     (0x7fffffffL)
+#else /* __s390x__ */
+# define VMALLOC_END     (0x40000000000L)
+#endif /* __s390x__ */
+
+
+/*
+ * A 31 bit pagetable entry of S390 has following format:
+ *  |   PFRA          |    |  OS  |
+ * 0                   0IP0
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 31 bit segmenttable entry of S390 has following format:
+ *  |   P-table origin      |  |PTL
+ * 0                         IC
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * PTL Page-Table-Length:    Page-table length (PTL+1*16 entries -> up to 256)
+ *
+ * The 31 bit segmenttable origin of S390 has following format:
+ *
+ *  |S-table origin   |     | STL |
+ * X                   **GPS
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:     *
+ * P Private-Space Bit:       Segment is not private (PoP 3-30)
+ * S Storage-Alteration:
+ * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
+ *
+ * A 64 bit pagetable entry of S390 has following format:
+ * |                     PFRA                         |0IP0|  OS  |
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 64 bit segmenttable entry of S390 has following format:
+ * |        P-table origin                              |      TT
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * P Page-Protection Bit: Store access not possible for page
+ * TT Type 00
+ *
+ * A 64 bit region table entry of S390 has following format:
+ * |        S-table origin                             |   TF  TTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * TT Type 01
+ * TF
+ * TL Table lenght
+ *
+ * The 64 bit regiontable origin of S390 has following format:
+ * |      region table origon                          |       DTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:  
+ * P Private-Space Bit:    
+ * S Storage-Alteration:
+ * R Real space
+ * TL Table-Length:
+ *
+ * A storage key has the following format:
+ * | ACC |F|R|C|0|
+ *  0   3 4 5 6 7
+ * ACC: access key
+ * F  : fetch protection bit
+ * R  : referenced bit
+ * C  : changed bit
+ */
+
+/* Hardware bits in the page table entry */
+#define _PAGE_RO        0x200          /* HW read-only                     */
+#define _PAGE_INVALID   0x400          /* HW invalid                       */
+
+/* Mask and four different kinds of invalid pages. */
+#define _PAGE_INVALID_MASK	0x601
+#define _PAGE_INVALID_EMPTY	0x400
+#define _PAGE_INVALID_NONE	0x401
+#define _PAGE_INVALID_SWAP	0x600
+#define _PAGE_INVALID_FILE	0x601
+
+#ifndef __s390x__
+
+/* Bits in the segment table entry */
+#define _PAGE_TABLE_LEN 0xf            /* only full page-tables            */
+#define _PAGE_TABLE_COM 0x10           /* common page-table                */
+#define _PAGE_TABLE_INV 0x20           /* invalid page-table               */
+#define _SEG_PRESENT    0x001          /* Software (overlap with PTL)      */
+
+/* Bits int the storage key */
+#define _PAGE_CHANGED    0x02          /* HW changed bit                   */
+#define _PAGE_REFERENCED 0x04          /* HW referenced bit                */
+
+#define _USER_SEG_TABLE_LEN    0x7f    /* user-segment-table up to 2 GB    */
+#define _KERNEL_SEG_TABLE_LEN  0x7f    /* kernel-segment-table up to 2 GB  */
+
+/*
+ * User and Kernel pagetables are identical
+ */
+#define _PAGE_TABLE	_PAGE_TABLE_LEN
+#define _KERNPG_TABLE	_PAGE_TABLE_LEN
+
+/*
+ * The Kernel segment-tables includes the User segment-table
+ */
+
+#define _SEGMENT_TABLE	(_USER_SEG_TABLE_LEN|0x80000000|0x100)
+#define _KERNSEG_TABLE	_KERNEL_SEG_TABLE_LEN
+
+#define USER_STD_MASK	0x00000080UL
+
+#else /* __s390x__ */
+
+/* Bits in the segment table entry */
+#define _PMD_ENTRY_INV   0x20          /* invalid segment table entry      */
+#define _PMD_ENTRY       0x00        
+
+/* Bits in the region third table entry */
+#define _PGD_ENTRY_INV   0x20          /* invalid region table entry       */
+#define _PGD_ENTRY       0x07
+
+/*
+ * User and kernel page directory
+ */
+#define _REGION_THIRD       0x4
+#define _REGION_THIRD_LEN   0x3 
+#define _REGION_TABLE       (_REGION_THIRD|_REGION_THIRD_LEN|0x40|0x100)
+#define _KERN_REGION_TABLE  (_REGION_THIRD|_REGION_THIRD_LEN)
+
+#define USER_STD_MASK           0x0000000000000080UL
+
+/* Bits in the storage key */
+#define _PAGE_CHANGED    0x02          /* HW changed bit                   */
+#define _PAGE_REFERENCED 0x04          /* HW referenced bit                */
+
+#endif /* __s390x__ */
+
+/*
+ * No mapping available
+ */
+#define PAGE_NONE_SHARED  __pgprot(_PAGE_INVALID_NONE)
+#define PAGE_NONE_PRIVATE __pgprot(_PAGE_INVALID_NONE)
+#define PAGE_RO_SHARED	  __pgprot(_PAGE_RO)
+#define PAGE_RO_PRIVATE	  __pgprot(_PAGE_RO)
+#define PAGE_COPY	  __pgprot(_PAGE_RO)
+#define PAGE_SHARED	  __pgprot(0)
+#define PAGE_KERNEL	  __pgprot(0)
+
+/*
+ * The S390 can't do page protection for execute, and considers that the
+ * same are read. Also, write permissions imply read permissions. This is
+ * the closest we can get..
+ */
+         /*xwr*/
+#define __P000  PAGE_NONE_PRIVATE
+#define __P001  PAGE_RO_PRIVATE
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_RO_PRIVATE
+#define __P101  PAGE_RO_PRIVATE
+#define __P110  PAGE_COPY
+#define __P111  PAGE_COPY
+
+#define __S000  PAGE_NONE_SHARED
+#define __S001  PAGE_RO_SHARED
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_RO_SHARED
+#define __S101  PAGE_RO_SHARED
+#define __S110  PAGE_SHARED
+#define __S111  PAGE_SHARED
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+extern inline void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	*pteptr = pteval;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * pgd/pmd/pte query functions
+ */
+#ifndef __s390x__
+
+extern inline int pgd_present(pgd_t pgd) { return 1; }
+extern inline int pgd_none(pgd_t pgd)    { return 0; }
+extern inline int pgd_bad(pgd_t pgd)     { return 0; }
+
+extern inline int pmd_present(pmd_t pmd) { return pmd_val(pmd) & _SEG_PRESENT; }
+extern inline int pmd_none(pmd_t pmd)    { return pmd_val(pmd) & _PAGE_TABLE_INV; }
+extern inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_val(pmd) & (~PAGE_MASK & ~_PAGE_TABLE_INV)) != _PAGE_TABLE;
+}
+
+#else /* __s390x__ */
+
+extern inline int pgd_present(pgd_t pgd)
+{
+	return (pgd_val(pgd) & ~PAGE_MASK) == _PGD_ENTRY;
+}
+
+extern inline int pgd_none(pgd_t pgd)
+{
+	return pgd_val(pgd) & _PGD_ENTRY_INV;
+}
+
+extern inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_val(pgd) & (~PAGE_MASK & ~_PGD_ENTRY_INV)) != _PGD_ENTRY;
+}
+
+extern inline int pmd_present(pmd_t pmd)
+{
+	return (pmd_val(pmd) & ~PAGE_MASK) == _PMD_ENTRY;
+}
+
+extern inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) & _PMD_ENTRY_INV;
+}
+
+extern inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_val(pmd) & (~PAGE_MASK & ~_PMD_ENTRY_INV)) != _PMD_ENTRY;
+}
+
+#endif /* __s390x__ */
+
+extern inline int pte_none(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_INVALID_MASK) == _PAGE_INVALID_EMPTY;
+}
+
+extern inline int pte_present(pte_t pte)
+{
+	return !(pte_val(pte) & _PAGE_INVALID) ||
+		(pte_val(pte) & _PAGE_INVALID_MASK) == _PAGE_INVALID_NONE;
+}
+
+extern inline int pte_file(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_INVALID_MASK) == _PAGE_INVALID_FILE;
+}
+
+#define pte_same(a,b)	(pte_val(a) == pte_val(b))
+
+/*
+ * query functions pte_write/pte_dirty/pte_young only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+extern inline int pte_write(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_RO) == 0;
+}
+
+extern inline int pte_dirty(pte_t pte)
+{
+	/* A pte is neither clean nor dirty on s/390. The dirty bit
+	 * is in the storage key. See page_test_and_clear_dirty for
+	 * details.
+	 */
+	return 0;
+}
+
+extern inline int pte_young(pte_t pte)
+{
+	/* A pte is neither young nor old on s/390. The young bit
+	 * is in the storage key. See page_test_and_clear_young for
+	 * details.
+	 */
+	return 0;
+}
+
+extern inline int pte_read(pte_t pte)
+{
+	/* All pages are readable since we don't use the fetch
+	 * protection bit in the storage key.
+	 */
+	return 1;
+}
+
+/*
+ * pgd/pmd/pte modification functions
+ */
+
+#ifndef __s390x__
+
+extern inline void pgd_clear(pgd_t * pgdp)      { }
+
+extern inline void pmd_clear(pmd_t * pmdp)
+{
+	pmd_val(pmdp[0]) = _PAGE_TABLE_INV;
+	pmd_val(pmdp[1]) = _PAGE_TABLE_INV;
+	pmd_val(pmdp[2]) = _PAGE_TABLE_INV;
+	pmd_val(pmdp[3]) = _PAGE_TABLE_INV;
+}
+
+#else /* __s390x__ */
+
+extern inline void pgd_clear(pgd_t * pgdp)
+{
+	pgd_val(*pgdp) = _PGD_ENTRY_INV | _PGD_ENTRY;
+}
+
+extern inline void pmd_clear(pmd_t * pmdp)
+{
+	pmd_val(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY;
+	pmd_val1(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY;
+}
+
+#endif /* __s390x__ */
+
+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_val(*ptep) = _PAGE_INVALID_EMPTY;
+}
+
+/*
+ * The following pte modification functions only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) &= PAGE_MASK;
+	pte_val(pte) |= pgprot_val(newprot);
+	return pte;
+}
+
+extern inline pte_t pte_wrprotect(pte_t pte)
+{
+	/* Do not clobber _PAGE_INVALID_NONE pages!  */
+	if (!(pte_val(pte) & _PAGE_INVALID))
+		pte_val(pte) |= _PAGE_RO;
+	return pte;
+}
+
+extern inline pte_t pte_mkwrite(pte_t pte) 
+{
+	pte_val(pte) &= ~_PAGE_RO;
+	return pte;
+}
+
+extern inline pte_t pte_mkclean(pte_t pte)
+{
+	/* The only user of pte_mkclean is the fork() code.
+	   We must *not* clear the *physical* page dirty bit
+	   just because fork() wants to clear the dirty bit in
+	   *one* of the page's mappings.  So we just do nothing. */
+	return pte;
+}
+
+extern inline pte_t pte_mkdirty(pte_t pte)
+{
+	/* We do not explicitly set the dirty bit because the
+	 * sske instruction is slow. It is faster to let the
+	 * next instruction set the dirty bit.
+	 */
+	return pte;
+}
+
+extern inline pte_t pte_mkold(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in clearing the real referenced bit.
+	 */
+	return pte;
+}
+
+extern inline pte_t pte_mkyoung(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in setting the real referenced bit.
+	 */
+	return pte;
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	return 0;
+}
+
+static inline int
+ptep_clear_flush_young(struct vm_area_struct *vma,
+			unsigned long address, pte_t *ptep)
+{
+	/* No need to flush TLB; bits are in storage key */
+	return ptep_test_and_clear_young(vma, address, ptep);
+}
+
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	return 0;
+}
+
+static inline int
+ptep_clear_flush_dirty(struct vm_area_struct *vma,
+			unsigned long address, pte_t *ptep)
+{
+	/* No need to flush TLB; bits are in storage key */
+	return ptep_test_and_clear_dirty(vma, address, ptep);
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+}
+
+static inline pte_t
+ptep_clear_flush(struct vm_area_struct *vma,
+		 unsigned long address, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+#ifndef __s390x__
+	if (!(pte_val(pte) & _PAGE_INVALID)) {
+		/* S390 has 1mb segments, we are emulating 4MB segments */
+		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
+		__asm__ __volatile__ ("ipte %2,%3"
+				      : "=m" (*ptep) : "m" (*ptep),
+				        "a" (pto), "a" (address) );
+	}
+#else /* __s390x__ */
+	if (!(pte_val(pte) & _PAGE_INVALID)) 
+		__asm__ __volatile__ ("ipte %2,%3"
+				      : "=m" (*ptep) : "m" (*ptep),
+				        "a" (ptep), "a" (address) );
+#endif /* __s390x__ */
+	pte_val(*ptep) = _PAGE_INVALID_EMPTY;
+	return pte;
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+}
+
+static inline void
+ptep_establish(struct vm_area_struct *vma, 
+	       unsigned long address, pte_t *ptep,
+	       pte_t entry)
+{
+	ptep_clear_flush(vma, address, ptep);
+	set_pte(ptep, entry);
+}
+
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+	ptep_establish(__vma, __address, __ptep, __entry)
+
+/*
+ * Test and clear dirty bit in storage key.
+ * We can't clear the changed bit atomically. This is a potential
+ * race against modification of the referenced bit. This function
+ * should therefore only be called if it is not mapped in any
+ * address space.
+ */
+#define page_test_and_clear_dirty(_page)				  \
+({									  \
+	struct page *__page = (_page);					  \
+	unsigned long __physpage = __pa((__page-mem_map) << PAGE_SHIFT);  \
+	int __skey = page_get_storage_key(__physpage);			  \
+	if (__skey & _PAGE_CHANGED)					  \
+		page_set_storage_key(__physpage, __skey & ~_PAGE_CHANGED);\
+	(__skey & _PAGE_CHANGED);					  \
+})
+
+/*
+ * Test and clear referenced bit in storage key.
+ */
+#define page_test_and_clear_young(page)					  \
+({									  \
+	struct page *__page = (page);					  \
+	unsigned long __physpage = __pa((__page-mem_map) << PAGE_SHIFT);  \
+	int __ccode;							  \
+	asm volatile ("rrbe 0,%1\n\t"					  \
+		      "ipm  %0\n\t"					  \
+		      "srl  %0,28\n\t" 					  \
+                      : "=d" (__ccode) : "a" (__physpage) : "cc" );	  \
+	(__ccode & 2);							  \
+})
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{
+	pte_t __pte;
+	pte_val(__pte) = physpage + pgprot_val(pgprot);
+	return __pte;
+}
+
+#define mk_pte(pg, pgprot)                                                \
+({                                                                        \
+	struct page *__page = (pg);                                       \
+	pgprot_t __pgprot = (pgprot);					  \
+	unsigned long __physpage = __pa((__page-mem_map) << PAGE_SHIFT);  \
+	pte_t __pte = mk_pte_phys(__physpage, __pgprot);                  \
+	__pte;                                                            \
+})
+
+#define pfn_pte(pfn, pgprot)                                              \
+({                                                                        \
+	pgprot_t __pgprot = (pgprot);					  \
+	unsigned long __physpage = __pa((pfn) << PAGE_SHIFT);             \
+	pte_t __pte = mk_pte_phys(__physpage, __pgprot);                  \
+	__pte;                                                            \
+})
+
+#define SetPageUptodate(_page) \
+	do {								      \
+		struct page *__page = (_page);				      \
+		if (!test_and_set_bit(PG_uptodate, &__page->flags))	      \
+			page_test_and_clear_dirty(_page);		      \
+	} while (0)
+
+#ifdef __s390x__
+
+#define pfn_pmd(pfn, pgprot)                                              \
+({                                                                        \
+	pgprot_t __pgprot = (pgprot);                                     \
+	unsigned long __physpage = __pa((pfn) << PAGE_SHIFT);             \
+	pmd_t __pmd = __pmd(__physpage + pgprot_val(__pgprot));           \
+	__pmd;                                                            \
+})
+
+#endif /* __s390x__ */
+
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pmd_page_kernel(pmd) (pmd_val(pmd) & PAGE_MASK)
+
+#define pmd_page(pmd) (mem_map+(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pgd_page_kernel(pgd) (pgd_val(pgd) & PAGE_MASK)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#ifndef __s390x__
+
+/* Find an entry in the second-level page table.. */
+extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+        return (pmd_t *) dir;
+}
+
+#else /* __s390x__ */
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pmd_offset(dir,addr) \
+	((pmd_t *) pgd_page_kernel(*(dir)) + pmd_index(addr))
+
+#endif /* __s390x__ */
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) \
+	((pte_t *) pmd_page_kernel(*(pmd)) + pte_index(address))
+#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/*
+ * 31 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 21 and bit 22 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 30 and 31 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 1-19 and bits 24-29 to store type and offset.
+ * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
+ * plus 24 for the offset.
+ * 0|     offset        |0110|o|type |00|
+ * 0 0000000001111111111 2222 2 22222 33
+ * 0 1234567890123456789 0123 4 56789 01
+ *
+ * 64 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 52 and bit 55 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 53 and bit 54 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 62 and 63 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 0-51 and bits 56-61 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
+ * plus 56 for the offset.
+ * |                      offset                        |0110|o|type |00|
+ *  0000000000111111111122222222223333333333444444444455 5555 5 55566 66
+ *  0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ */
+#ifndef __s390x__
+#define __SWP_OFFSET_MASK (~0UL >> 12)
+#else
+#define __SWP_OFFSET_MASK (~0UL >> 11)
+#endif
+extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{
+	pte_t pte;
+	offset &= __SWP_OFFSET_MASK;
+	pte_val(pte) = _PAGE_INVALID_SWAP | ((type & 0x1f) << 2) |
+		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+	return pte;
+}
+
+#define __swp_type(entry)	(((entry).val >> 2) & 0x1f)
+#define __swp_offset(entry)	(((entry).val >> 11) | (((entry).val >> 7) & 1))
+#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#ifndef __s390x__
+# define PTE_FILE_MAX_BITS	26
+#else /* __s390x__ */
+# define PTE_FILE_MAX_BITS	59
+#endif /* __s390x__ */
+
+#define pte_to_pgoff(__pte) \
+	((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f))
+
+#define pgoff_to_pte(__off) \
+	((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \
+		   | _PAGE_INVALID_FILE })
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)   (1)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#define __HAVE_ARCH_PTEP_ESTABLISH
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
+#include <asm-generic/pgtable.h>
+
+#endif /* _S390_PAGE_H */
+
diff --git a/include/asm-s390/poll.h b/include/asm-s390/poll.h
new file mode 100644
index 000000000000..e90a5ca42061
--- /dev/null
+++ b/include/asm-s390/poll.h
@@ -0,0 +1,34 @@
+/*
+ *  include/asm-s390/poll.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/poll.h"
+ */
+
+#ifndef __S390_POLL_H
+#define __S390_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN          0x0001
+#define POLLPRI         0x0002
+#define POLLOUT         0x0004
+#define POLLERR         0x0008
+#define POLLHUP         0x0010
+#define POLLNVAL        0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-s390/posix_types.h b/include/asm-s390/posix_types.h
new file mode 100644
index 000000000000..61788de3c0c3
--- /dev/null
+++ b/include/asm-s390/posix_types.h
@@ -0,0 +1,99 @@
+/*
+ *  include/asm-s390/posix_types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/posix_types.h"
+ */
+
+#ifndef __ARCH_S390_POSIX_TYPES_H
+#define __ARCH_S390_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+#ifndef __s390x__
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef int             __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#else /* __s390x__ */
+
+typedef unsigned int    __kernel_ino_t;
+typedef unsigned int    __kernel_mode_t;
+typedef unsigned int    __kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned int    __kernel_uid_t;
+typedef unsigned int    __kernel_gid_t;
+typedef long            __kernel_ssize_t;
+typedef long            __kernel_ptrdiff_t;
+typedef unsigned long   __kernel_sigset_t;      /* at least 32 bits */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#endif /* __s390x__ */
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else                        /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+        int     __val[2];
+#endif                       /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+} __kernel_fsid_t;
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#ifndef _S390_BITOPS_H
+#include <asm/bitops.h>
+#endif
+
+#undef  __FD_SET
+#define __FD_SET(fd,fdsetp)  set_bit((fd),(fdsetp)->fds_bits)
+
+#undef  __FD_CLR
+#define __FD_CLR(fd,fdsetp)  clear_bit((fd),(fdsetp)->fds_bits)
+
+#undef  __FD_ISSET
+#define __FD_ISSET(fd,fdsetp)  test_bit((fd),(fdsetp)->fds_bits)
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset ((fdsetp), 0, sizeof(*(fd_set *)(fdsetp))))
+
+#endif     /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)*/
+
+#endif
diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h
new file mode 100644
index 000000000000..cbbd11471672
--- /dev/null
+++ b/include/asm-s390/processor.h
@@ -0,0 +1,355 @@
+/*
+ *  include/asm-s390/processor.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/processor.h"
+ *    Copyright (C) 1994, Linus Torvalds
+ */
+
+#ifndef __ASM_S390_PROCESSOR_H
+#define __ASM_S390_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("basr %0,0":"=a"(pc)); pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+        unsigned int version :  8;
+        unsigned int ident   : 24;
+        unsigned int machine : 16;
+        unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+struct cpuinfo_S390
+{
+        cpuid_t  cpu_id;
+        __u16    cpu_addr;
+        __u16    cpu_nr;
+        unsigned long loops_per_jiffy;
+        unsigned long *pgd_quick;
+#ifdef __s390x__
+        unsigned long *pmd_quick;
+#endif /* __s390x__ */
+        unsigned long *pte_quick;
+        unsigned long pgtable_cache_sz;
+};
+
+extern void print_cpu_info(struct cpuinfo_S390 *);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+
+/*
+ * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+ */
+#ifndef __s390x__
+
+# define TASK_SIZE		(0x80000000UL)
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 2)
+# define DEFAULT_TASK_SIZE	(0x80000000UL)
+
+#else /* __s390x__ */
+
+# define TASK_SIZE		(test_thread_flag(TIF_31BIT) ? \
+					(0x80000000UL) : (0x40000000000UL))
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 2)
+# define DEFAULT_TASK_SIZE	(0x40000000000UL)
+
+#endif /* __s390x__ */
+
+#define MM_VM_SIZE(mm)		DEFAULT_TASK_SIZE
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+typedef struct {
+        __u32 ar4;
+} mm_segment_t;
+
+/*
+ * Thread structure
+ */
+struct thread_struct {
+	s390_fp_regs fp_regs;
+	unsigned int  acrs[NUM_ACRS];
+        unsigned long ksp;              /* kernel stack pointer             */
+        unsigned long user_seg;         /* HSTD                             */
+	mm_segment_t mm_segment;
+        unsigned long prot_addr;        /* address of protection-excep.     */
+        unsigned int error_code;        /* error-code of last prog-excep.   */
+        unsigned int trap_no;
+        per_struct per_info;
+	/* Used to give failing instruction back to user for ieee exceptions */
+	unsigned long ieee_instruction_pointer; 
+        /* pfault_wait is used to block the process on a pfault event */
+	unsigned long pfault_wait;
+};
+
+typedef struct thread_struct thread_struct;
+
+/*
+ * Stack layout of a C stack frame.
+ */
+#ifndef __PACK_STACK
+struct stack_frame {
+	unsigned long back_chain;
+	unsigned long empty1[5];
+	unsigned long gprs[10];
+	unsigned int  empty2[8];
+};
+#else
+struct stack_frame {
+	unsigned long empty1[5];
+	unsigned int  empty2[8];
+	unsigned long gprs[10];
+	unsigned long back_chain;
+};
+#endif
+
+#define ARCH_MIN_TASKALIGN	8
+
+#ifndef __s390x__
+# define __SWAPPER_PG_DIR __pa(&swapper_pg_dir[0]) + _SEGMENT_TABLE
+#else /* __s390x__ */
+# define __SWAPPER_PG_DIR __pa(&swapper_pg_dir[0]) + _REGION_TABLE
+#endif /* __s390x__ */
+
+#define INIT_THREAD {{0,{{0},{0},{0},{0},{0},{0},{0},{0},{0},{0},	       \
+			    {0},{0},{0},{0},{0},{0}}},			       \
+		     {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},	       \
+		     sizeof(init_stack) + (unsigned long) &init_stack,	       \
+		     __SWAPPER_PG_DIR,					       \
+		     {0},						       \
+		     0,0,0,						       \
+		     (per_struct) {{{{0,}}},0,0,0,0,{{0,}}},		       \
+		     0, 0						       \
+} 
+
+/*
+ * Do necessary setup to start up a new thread.
+ */
+#ifndef __s390x__
+
+#define start_thread(regs, new_psw, new_stackp) do {            \
+        regs->psw.mask  = PSW_USER_BITS;                        \
+        regs->psw.addr  = new_psw | PSW_ADDR_AMODE;             \
+        regs->gprs[15]  = new_stackp ;                          \
+} while (0)
+
+#else /* __s390x__ */
+
+#define start_thread(regs, new_psw, new_stackp) do {            \
+        regs->psw.mask  = PSW_USER_BITS;                        \
+        regs->psw.addr  = new_psw;                              \
+        regs->gprs[15]  = new_stackp;                           \
+} while (0)
+
+#define start_thread31(regs, new_psw, new_stackp) do {          \
+	regs->psw.mask  = PSW_USER32_BITS;			\
+        regs->psw.addr  = new_psw;                              \
+        regs->gprs[15]  = new_stackp;                           \
+} while (0)
+
+#endif /* __s390x__ */
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/*
+ * Print register of task into buffer. Used in fs/proc/array.c.
+ */
+extern char *task_show_regs(struct task_struct *task, char *buffer);
+
+extern void show_registers(struct pt_regs *regs);
+extern void show_trace(struct task_struct *task, unsigned long *sp);
+
+unsigned long get_wchan(struct task_struct *p);
+#define __KSTK_PTREGS(tsk) ((struct pt_regs *) \
+        ((unsigned long) tsk->thread_info + THREAD_SIZE - sizeof(struct pt_regs)))
+#define KSTK_EIP(tsk)	(__KSTK_PTREGS(tsk)->psw.addr)
+#define KSTK_ESP(tsk)	(__KSTK_PTREGS(tsk)->gprs[15])
+
+/*
+ * Give up the time slice of the virtual PU.
+ */
+#ifndef __s390x__
+# define cpu_relax()	asm volatile ("diag 0,0,68" : : : "memory")
+#else /* __s390x__ */
+# define cpu_relax() \
+	asm volatile ("ex 0,%0" : : "i" (__LC_DIAG44_OPCODE) : "memory")
+#endif /* __s390x__ */
+
+/*
+ * Set PSW mask to specified value, while leaving the
+ * PSW addr pointing to the next instruction.
+ */
+
+static inline void __load_psw_mask (unsigned long mask)
+{
+	unsigned long addr;
+
+	psw_t psw;
+	psw.mask = mask;
+
+#ifndef __s390x__
+	asm volatile (
+		"    basr %0,0\n"
+		"0:  ahi  %0,1f-0b\n"
+		"    st	  %0,4(%1)\n"
+		"    lpsw 0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc" );
+#else /* __s390x__ */
+	asm volatile (
+		"    larl  %0,1f\n"
+		"    stg   %0,8(%1)\n"
+		"    lpswe 0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc" );
+#endif /* __s390x__ */
+}
+ 
+/*
+ * Function to stop a processor until an interruption occurred
+ */
+static inline void enabled_wait(void)
+{
+	unsigned long reg;
+	psw_t wait_psw;
+
+	wait_psw.mask = PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT |
+		PSW_MASK_MCHECK | PSW_MASK_WAIT;
+#ifndef __s390x__
+	asm volatile (
+		"    basr %0,0\n"
+		"0:  la   %0,1f-0b(%0)\n"
+		"    st   %0,4(%1)\n"
+		"    oi   4(%1),0x80\n"
+		"    lpsw 0(%1)\n"
+		"1:"
+		: "=&a" (reg) : "a" (&wait_psw), "m" (wait_psw)
+		: "memory", "cc" );
+#else /* __s390x__ */
+	asm volatile (
+		"    larl  %0,0f\n"
+		"    stg   %0,8(%1)\n"
+		"    lpswe 0(%1)\n"
+		"0:"
+		: "=&a" (reg) : "a" (&wait_psw), "m" (wait_psw)
+		: "memory", "cc" );
+#endif /* __s390x__ */
+}
+
+/*
+ * Function to drop a processor into disabled wait state
+ */
+
+static inline void disabled_wait(unsigned long code)
+{
+        char psw_buffer[2*sizeof(psw_t)];
+        unsigned long ctl_buf;
+        psw_t *dw_psw = (psw_t *)(((unsigned long) &psw_buffer+sizeof(psw_t)-1)
+                                  & -sizeof(psw_t));
+
+        dw_psw->mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+        dw_psw->addr = code;
+        /* 
+         * Store status and then load disabled wait psw,
+         * the processor is dead afterwards
+         */
+#ifndef __s390x__
+        asm volatile ("    stctl 0,0,0(%2)\n"
+                      "    ni    0(%2),0xef\n" /* switch off protection */
+                      "    lctl  0,0,0(%2)\n"
+                      "    stpt  0xd8\n"       /* store timer */
+                      "    stckc 0xe0\n"       /* store clock comparator */
+                      "    stpx  0x108\n"      /* store prefix register */
+                      "    stam  0,15,0x120\n" /* store access registers */
+                      "    std   0,0x160\n"    /* store f0 */
+                      "    std   2,0x168\n"    /* store f2 */
+                      "    std   4,0x170\n"    /* store f4 */
+                      "    std   6,0x178\n"    /* store f6 */
+                      "    stm   0,15,0x180\n" /* store general registers */
+                      "    stctl 0,15,0x1c0\n" /* store control registers */
+                      "    oi    0x1c0,0x10\n" /* fake protection bit */
+                      "    lpsw 0(%1)"
+                      : "=m" (ctl_buf)
+		      : "a" (dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc" );
+#else /* __s390x__ */
+        asm volatile ("    stctg 0,0,0(%2)\n"
+                      "    ni    4(%2),0xef\n" /* switch off protection */
+                      "    lctlg 0,0,0(%2)\n"
+                      "    lghi  1,0x1000\n"
+                      "    stpt  0x328(1)\n"      /* store timer */
+                      "    stckc 0x330(1)\n"      /* store clock comparator */
+                      "    stpx  0x318(1)\n"      /* store prefix register */
+                      "    stam  0,15,0x340(1)\n" /* store access registers */
+                      "    stfpc 0x31c(1)\n"      /* store fpu control */
+                      "    std   0,0x200(1)\n"    /* store f0 */
+                      "    std   1,0x208(1)\n"    /* store f1 */
+                      "    std   2,0x210(1)\n"    /* store f2 */
+                      "    std   3,0x218(1)\n"    /* store f3 */
+                      "    std   4,0x220(1)\n"    /* store f4 */
+                      "    std   5,0x228(1)\n"    /* store f5 */
+                      "    std   6,0x230(1)\n"    /* store f6 */
+                      "    std   7,0x238(1)\n"    /* store f7 */
+                      "    std   8,0x240(1)\n"    /* store f8 */
+                      "    std   9,0x248(1)\n"    /* store f9 */
+                      "    std   10,0x250(1)\n"   /* store f10 */
+                      "    std   11,0x258(1)\n"   /* store f11 */
+                      "    std   12,0x260(1)\n"   /* store f12 */
+                      "    std   13,0x268(1)\n"   /* store f13 */
+                      "    std   14,0x270(1)\n"   /* store f14 */
+                      "    std   15,0x278(1)\n"   /* store f15 */
+                      "    stmg  0,15,0x280(1)\n" /* store general registers */
+                      "    stctg 0,15,0x380(1)\n" /* store control registers */
+                      "    oi    0x384(1),0x10\n" /* fake protection bit */
+                      "    lpswe 0(%1)"
+                      : "=m" (ctl_buf)
+		      : "a" (dw_psw), "a" (&ctl_buf),
+		        "m" (dw_psw) : "cc", "0", "1");
+#endif /* __s390x__ */
+}
+
+/*
+ * CPU idle notifier chain.
+ */
+#define CPU_IDLE	0
+#define CPU_NOT_IDLE	1
+
+struct notifier_block;
+int register_idle_notifier(struct notifier_block *nb);
+int unregister_idle_notifier(struct notifier_block *nb);
+
+#endif
+
+#endif                                 /* __ASM_S390_PROCESSOR_H           */
diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h
new file mode 100644
index 000000000000..1dc80666e97e
--- /dev/null
+++ b/include/asm-s390/ptrace.h
@@ -0,0 +1,475 @@
+/*
+ *  include/asm-s390/ptrace.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _S390_PTRACE_H
+#define _S390_PTRACE_H
+
+/*
+ * Offsets in the user_regs_struct. They are used for the ptrace
+ * system call and in entry.S
+ */
+#ifndef __s390x__
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x04
+#define PT_GPR0     0x08
+#define PT_GPR1     0x0C
+#define PT_GPR2     0x10
+#define PT_GPR3     0x14
+#define PT_GPR4     0x18
+#define PT_GPR5     0x1C
+#define PT_GPR6     0x20
+#define PT_GPR7     0x24
+#define PT_GPR8     0x28
+#define PT_GPR9     0x2C
+#define PT_GPR10    0x30
+#define PT_GPR11    0x34
+#define PT_GPR12    0x38
+#define PT_GPR13    0x3C
+#define PT_GPR14    0x40
+#define PT_GPR15    0x44
+#define PT_ACR0     0x48
+#define PT_ACR1     0x4C
+#define PT_ACR2     0x50
+#define PT_ACR3     0x54
+#define PT_ACR4	    0x58
+#define PT_ACR5	    0x5C
+#define PT_ACR6	    0x60
+#define PT_ACR7	    0x64
+#define PT_ACR8	    0x68
+#define PT_ACR9	    0x6C
+#define PT_ACR10    0x70
+#define PT_ACR11    0x74
+#define PT_ACR12    0x78
+#define PT_ACR13    0x7C
+#define PT_ACR14    0x80
+#define PT_ACR15    0x84
+#define PT_ORIGGPR2 0x88
+#define PT_FPC	    0x90
+/*
+ * A nasty fact of life that the ptrace api
+ * only supports passing of longs.
+ */
+#define PT_FPR0_HI  0x98
+#define PT_FPR0_LO  0x9C
+#define PT_FPR1_HI  0xA0
+#define PT_FPR1_LO  0xA4
+#define PT_FPR2_HI  0xA8
+#define PT_FPR2_LO  0xAC
+#define PT_FPR3_HI  0xB0
+#define PT_FPR3_LO  0xB4
+#define PT_FPR4_HI  0xB8
+#define PT_FPR4_LO  0xBC
+#define PT_FPR5_HI  0xC0
+#define PT_FPR5_LO  0xC4
+#define PT_FPR6_HI  0xC8
+#define PT_FPR6_LO  0xCC
+#define PT_FPR7_HI  0xD0
+#define PT_FPR7_LO  0xD4
+#define PT_FPR8_HI  0xD8
+#define PT_FPR8_LO  0XDC
+#define PT_FPR9_HI  0xE0
+#define PT_FPR9_LO  0xE4
+#define PT_FPR10_HI 0xE8
+#define PT_FPR10_LO 0xEC
+#define PT_FPR11_HI 0xF0
+#define PT_FPR11_LO 0xF4
+#define PT_FPR12_HI 0xF8
+#define PT_FPR12_LO 0xFC
+#define PT_FPR13_HI 0x100
+#define PT_FPR13_LO 0x104
+#define PT_FPR14_HI 0x108
+#define PT_FPR14_LO 0x10C
+#define PT_FPR15_HI 0x110
+#define PT_FPR15_LO 0x114
+#define PT_CR_9	    0x118
+#define PT_CR_10    0x11C
+#define PT_CR_11    0x120
+#define PT_IEEE_IP  0x13C
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x140-1
+
+#define GPR_SIZE	4
+#define CR_SIZE		4
+
+#define STACK_FRAME_OVERHEAD	96	/* size of minimum stack frame */
+
+#else /* __s390x__ */
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x08
+#define PT_GPR0     0x10
+#define PT_GPR1     0x18
+#define PT_GPR2     0x20
+#define PT_GPR3     0x28
+#define PT_GPR4     0x30
+#define PT_GPR5     0x38
+#define PT_GPR6     0x40
+#define PT_GPR7     0x48
+#define PT_GPR8     0x50
+#define PT_GPR9     0x58
+#define PT_GPR10    0x60
+#define PT_GPR11    0x68
+#define PT_GPR12    0x70
+#define PT_GPR13    0x78
+#define PT_GPR14    0x80
+#define PT_GPR15    0x88
+#define PT_ACR0     0x90
+#define PT_ACR1     0x94
+#define PT_ACR2     0x98
+#define PT_ACR3     0x9C
+#define PT_ACR4	    0xA0
+#define PT_ACR5	    0xA4
+#define PT_ACR6	    0xA8
+#define PT_ACR7	    0xAC
+#define PT_ACR8	    0xB0
+#define PT_ACR9	    0xB4
+#define PT_ACR10    0xB8
+#define PT_ACR11    0xBC
+#define PT_ACR12    0xC0
+#define PT_ACR13    0xC4
+#define PT_ACR14    0xC8
+#define PT_ACR15    0xCC
+#define PT_ORIGGPR2 0xD0
+#define PT_FPC	    0xD8
+#define PT_FPR0     0xE0
+#define PT_FPR1     0xE8
+#define PT_FPR2     0xF0
+#define PT_FPR3     0xF8
+#define PT_FPR4     0x100
+#define PT_FPR5     0x108
+#define PT_FPR6     0x110
+#define PT_FPR7     0x118
+#define PT_FPR8     0x120
+#define PT_FPR9     0x128
+#define PT_FPR10    0x130
+#define PT_FPR11    0x138
+#define PT_FPR12    0x140
+#define PT_FPR13    0x148
+#define PT_FPR14    0x150
+#define PT_FPR15    0x158
+#define PT_CR_9     0x160
+#define PT_CR_10    0x168
+#define PT_CR_11    0x170
+#define PT_IEEE_IP  0x1A8
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x1B0-1
+
+#define GPR_SIZE	8
+#define CR_SIZE		8
+
+#define STACK_FRAME_OVERHEAD    160      /* size of minimum stack frame */
+
+#endif /* __s390x__ */
+
+#define NUM_GPRS	16
+#define NUM_FPRS	16
+#define NUM_CRS		16
+#define NUM_ACRS	16
+
+#define FPR_SIZE	8
+#define FPC_SIZE	4
+#define FPC_PAD_SIZE	4 /* gcc insists on aligning the fpregs */
+#define ACR_SIZE	4
+
+
+#define PTRACE_OLDSETOPTIONS         21
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <asm/setup.h>
+
+typedef union
+{
+	float   f;
+	double  d;
+        __u64   ui;
+	struct
+	{
+		__u32 hi;
+		__u32 lo;
+	} fp;
+} freg_t;
+
+typedef struct
+{
+	__u32   fpc;
+	freg_t  fprs[NUM_FPRS];              
+} s390_fp_regs;
+
+#define FPC_EXCEPTION_MASK      0xF8000000
+#define FPC_FLAGS_MASK          0x00F80000
+#define FPC_DXC_MASK            0x0000FF00
+#define FPC_RM_MASK             0x00000003
+#define FPC_VALID_MASK          0xF8F8FF03
+
+/* this typedef defines how a Program Status Word looks like */
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) psw_t;
+
+#ifndef __s390x__
+
+#define PSW_MASK_PER		0x40000000UL
+#define PSW_MASK_DAT		0x04000000UL
+#define PSW_MASK_IO		0x02000000UL
+#define PSW_MASK_EXT		0x01000000UL
+#define PSW_MASK_KEY		0x00F00000UL
+#define PSW_MASK_MCHECK		0x00040000UL
+#define PSW_MASK_WAIT		0x00020000UL
+#define PSW_MASK_PSTATE		0x00010000UL
+#define PSW_MASK_ASC		0x0000C000UL
+#define PSW_MASK_CC		0x00003000UL
+#define PSW_MASK_PM		0x00000F00UL
+
+#define PSW_ADDR_AMODE		0x80000000UL
+#define PSW_ADDR_INSN		0x7FFFFFFFUL
+
+#define PSW_BASE_BITS		0x00080000UL
+
+#define PSW_ASC_PRIMARY		0x00000000UL
+#define PSW_ASC_ACCREG		0x00004000UL
+#define PSW_ASC_SECONDARY	0x00008000UL
+#define PSW_ASC_HOME		0x0000C000UL
+
+#else /* __s390x__ */
+
+#define PSW_MASK_PER		0x4000000000000000UL
+#define PSW_MASK_DAT		0x0400000000000000UL
+#define PSW_MASK_IO		0x0200000000000000UL
+#define PSW_MASK_EXT		0x0100000000000000UL
+#define PSW_MASK_KEY		0x00F0000000000000UL
+#define PSW_MASK_MCHECK		0x0004000000000000UL
+#define PSW_MASK_WAIT		0x0002000000000000UL
+#define PSW_MASK_PSTATE		0x0001000000000000UL
+#define PSW_MASK_ASC		0x0000C00000000000UL
+#define PSW_MASK_CC		0x0000300000000000UL
+#define PSW_MASK_PM		0x00000F0000000000UL
+
+#define PSW_ADDR_AMODE		0x0000000000000000UL
+#define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
+
+#define PSW_BASE_BITS		0x0000000180000000UL
+#define PSW_BASE32_BITS		0x0000000080000000UL
+
+#define PSW_ASC_PRIMARY		0x0000000000000000UL
+#define PSW_ASC_ACCREG		0x0000400000000000UL
+#define PSW_ASC_SECONDARY	0x0000800000000000UL
+#define PSW_ASC_HOME		0x0000C00000000000UL
+
+#define PSW_USER32_BITS (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \
+			 PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \
+			 PSW_MASK_PSTATE)
+
+#endif /* __s390x__ */
+
+#define PSW_KERNEL_BITS	(PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY)
+#define PSW_USER_BITS	(PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \
+			 PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \
+			 PSW_MASK_PSTATE)
+
+/* This macro merges a NEW PSW mask specified by the user into
+   the currently active PSW mask CURRENT, modifying only those
+   bits in CURRENT that the user may be allowed to change: this
+   is the condition code and the program mask bits.  */
+#define PSW_MASK_MERGE(CURRENT,NEW) \
+	(((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \
+	 ((NEW) & (PSW_MASK_CC|PSW_MASK_PM)))
+
+/*
+ * The s390_regs structure is used to define the elf_gregset_t.
+ */
+typedef struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+} s390_regs;
+
+#ifdef __KERNEL__
+/*
+ * The pt_regs struct defines the way the registers are stored on
+ * the stack during a system call.
+ */
+struct pt_regs 
+{
+	unsigned long args[1];
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned long orig_gpr2;
+	unsigned short ilc;
+	unsigned short trap;
+};
+#endif
+
+/*
+ * Now for the program event recording (trace) definitions.
+ */
+typedef struct
+{
+	unsigned long cr[3];
+} per_cr_words;
+
+#define PER_EM_MASK 0xE8000000UL
+
+typedef	struct
+{
+#ifdef __s390x__
+	unsigned                       : 32;
+#endif /* __s390x__ */
+	unsigned em_branching          : 1;
+	unsigned em_instruction_fetch  : 1;
+	/*
+	 * Switching on storage alteration automatically fixes
+	 * the storage alteration event bit in the users std.
+	 */
+	unsigned em_storage_alteration : 1;
+	unsigned em_gpr_alt_unused     : 1;
+	unsigned em_store_real_address : 1;
+	unsigned                       : 3;
+	unsigned branch_addr_ctl       : 1;
+	unsigned                       : 1;
+	unsigned storage_alt_space_ctl : 1;
+	unsigned                       : 21;
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+} per_cr_bits;
+
+typedef struct
+{
+	unsigned short perc_atmid;
+	unsigned long address;
+	unsigned char access_id;
+} per_lowcore_words;
+
+typedef struct
+{
+	unsigned perc_branching          : 1;
+	unsigned perc_instruction_fetch  : 1;
+	unsigned perc_storage_alteration : 1;
+	unsigned perc_gpr_alt_unused     : 1;
+	unsigned perc_store_real_address : 1;
+	unsigned                         : 3;
+	unsigned atmid_psw_bit_31        : 1;
+	unsigned atmid_validity_bit      : 1;
+	unsigned atmid_psw_bit_32        : 1;
+	unsigned atmid_psw_bit_5         : 1;
+	unsigned atmid_psw_bit_16        : 1;
+	unsigned atmid_psw_bit_17        : 1;
+	unsigned si                      : 2;
+	unsigned long address;
+	unsigned                         : 4;
+	unsigned access_id               : 4;
+} per_lowcore_bits;
+
+typedef struct
+{
+	union {
+		per_cr_words   words;
+		per_cr_bits    bits;
+	} control_regs;
+	/*
+	 * Use these flags instead of setting em_instruction_fetch
+	 * directly they are used so that single stepping can be
+	 * switched on & off while not affecting other tracing
+	 */
+	unsigned  single_step       : 1;
+	unsigned  instruction_fetch : 1;
+	unsigned                    : 30;
+	/*
+	 * These addresses are copied into cr10 & cr11 if single
+	 * stepping is switched off
+	 */
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+	union {
+		per_lowcore_words words;
+		per_lowcore_bits  bits;
+	} lowcore; 
+} per_struct;
+
+typedef struct
+{
+	unsigned int  len;
+	unsigned long kernel_addr;
+	unsigned long process_addr;
+} ptrace_area;
+
+/*
+ * S/390 specific non posix ptrace requests. I chose unusual values so
+ * they are unlikely to clash with future ptrace definitions.
+ */
+#define PTRACE_PEEKUSR_AREA           0x5000
+#define PTRACE_POKEUSR_AREA           0x5001
+#define PTRACE_PEEKTEXT_AREA	      0x5002
+#define PTRACE_PEEKDATA_AREA	      0x5003
+#define PTRACE_POKETEXT_AREA	      0x5004
+#define PTRACE_POKEDATA_AREA 	      0x5005
+
+/*
+ * PT_PROT definition is loosely based on hppa bsd definition in
+ * gdb/hppab-nat.c
+ */
+#define PTRACE_PROT                       21
+
+typedef enum
+{
+	ptprot_set_access_watchpoint,
+	ptprot_set_write_watchpoint,
+	ptprot_disable_watchpoint
+} ptprot_flags;
+
+typedef struct
+{
+	unsigned long lowaddr;
+	unsigned long hiaddr;
+	ptprot_flags prot;
+} ptprot_area;                     
+
+/* Sequence of bytes for breakpoint illegal instruction.  */
+#define S390_BREAKPOINT     {0x0,0x1}
+#define S390_BREAKPOINT_U16 ((__u16)0x0001)
+#define S390_SYSCALL_OPCODE ((__u16)0x0a00)
+#define S390_SYSCALL_SIZE   2
+
+/*
+ * The user_regs_struct defines the way the user registers are
+ * store on the stack for signal handling.
+ */
+struct user_regs_struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+	s390_fp_regs fp_regs;
+	/*
+	 * These per registers are in here so that gdb can modify them
+	 * itself as there is no "official" ptrace interface for hardware
+	 * watchpoints. This is the way intel does it.
+	 */
+	per_struct per_info;
+	unsigned long ieee_instruction_pointer; 
+	/* Used to give failing instruction back to user for ieee exceptions */
+};
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
+#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs * regs);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _S390_PTRACE_H */
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
new file mode 100644
index 000000000000..0ddf0a8ef8de
--- /dev/null
+++ b/include/asm-s390/qdio.h
@@ -0,0 +1,401 @@
+/*
+ * linux/include/asm/qdio.h
+ *
+ * Linux for S/390 QDIO base support, Hipersocket base support
+ * version 2
+ *
+ * Copyright 2000,2002 IBM Corporation
+ * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
+ *
+ */
+#ifndef __QDIO_H__
+#define __QDIO_H__
+
+#define VERSION_QDIO_H "$Revision: 1.57 $"
+
+/* note, that most of the typedef's are from ingo. */
+
+#include <linux/interrupt.h>
+#include <asm/cio.h>
+#include <asm/ccwdev.h>
+
+#define QDIO_NAME "qdio "
+
+#ifndef __s390x__
+#define QDIO_32_BIT
+#endif /* __s390x__ */
+
+/**** CONSTANTS, that are relied on without using these symbols *****/
+#define QDIO_MAX_QUEUES_PER_IRQ 32 /* used in width of unsigned int */
+/************************ END of CONSTANTS **************************/
+#define QDIO_MAX_BUFFERS_PER_Q 128 /* must be a power of 2 (%x=&(x-1)*/
+#define QDIO_BUF_ORDER 7 /* 2**this == number of pages used for sbals in 1 q */
+#define QDIO_MAX_ELEMENTS_PER_BUFFER 16
+#define SBAL_SIZE 256
+
+#define QDIO_QETH_QFMT 0
+#define QDIO_ZFCP_QFMT 1
+#define QDIO_IQDIO_QFMT 2
+
+struct qdio_buffer_element{
+	unsigned int flags;
+	unsigned int length;
+#ifdef QDIO_32_BIT
+	void *reserved;
+#endif /* QDIO_32_BIT */
+	void *addr;
+} __attribute__ ((packed,aligned(16)));
+
+struct qdio_buffer{
+	volatile struct qdio_buffer_element element[16];
+} __attribute__ ((packed,aligned(256)));
+
+
+/* params are: ccw_device, status, qdio_error, siga_error,
+   queue_number, first element processed, number of elements processed,
+   int_parm */
+typedef void qdio_handler_t(struct ccw_device *,unsigned int,unsigned int,
+			    unsigned int,unsigned int,int,int,unsigned long);
+
+
+#define QDIO_STATUS_INBOUND_INT 0x01
+#define QDIO_STATUS_OUTBOUND_INT 0x02
+#define QDIO_STATUS_LOOK_FOR_ERROR 0x04
+#define QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR 0x08
+#define QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR 0x10
+#define QDIO_STATUS_ACTIVATE_CHECK_CONDITION 0x20
+
+#define QDIO_SIGA_ERROR_ACCESS_EXCEPTION 0x10
+#define QDIO_SIGA_ERROR_B_BIT_SET 0x20
+
+/* for qdio_initialize */
+#define QDIO_INBOUND_0COPY_SBALS 0x01
+#define QDIO_OUTBOUND_0COPY_SBALS 0x02
+#define QDIO_USE_OUTBOUND_PCIS 0x04
+
+/* for qdio_cleanup */
+#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01
+#define QDIO_FLAG_CLEANUP_USING_HALT 0x02
+
+struct qdio_initialize {
+	struct ccw_device *cdev;
+	unsigned char q_format;
+	unsigned char adapter_name[8];
+       	unsigned int qib_param_field_format; /*adapter dependent*/
+	/* pointer to 128 bytes or NULL, if no param field */
+	unsigned char *qib_param_field; /* adapter dependent */
+	/* pointer to no_queues*128 words of data or NULL */
+	unsigned long *input_slib_elements;
+	unsigned long *output_slib_elements;
+	unsigned int min_input_threshold;
+	unsigned int max_input_threshold;
+	unsigned int min_output_threshold;
+	unsigned int max_output_threshold;
+	unsigned int no_input_qs;
+	unsigned int no_output_qs;
+	qdio_handler_t *input_handler;
+	qdio_handler_t *output_handler;
+	unsigned long int_parm;
+	unsigned long flags;
+	void **input_sbal_addr_array; /* addr of n*128 void ptrs */
+	void **output_sbal_addr_array; /* addr of n*128 void ptrs */
+};
+
+extern int qdio_initialize(struct qdio_initialize *init_data);
+extern int qdio_allocate(struct qdio_initialize *init_data);
+extern int qdio_establish(struct qdio_initialize *init_data);
+
+extern int qdio_activate(struct ccw_device *,int flags);
+
+#define QDIO_STATE_MUST_USE_OUTB_PCI	0x00000001
+#define QDIO_STATE_INACTIVE 		0x00000002 /* after qdio_cleanup */
+#define QDIO_STATE_ESTABLISHED 		0x00000004 /* after qdio_initialize */
+#define QDIO_STATE_ACTIVE 		0x00000008 /* after qdio_activate */
+#define QDIO_STATE_STOPPED 		0x00000010 /* after queues went down */
+extern unsigned long qdio_get_status(int irq);
+
+
+#define QDIO_FLAG_SYNC_INPUT     0x01
+#define QDIO_FLAG_SYNC_OUTPUT    0x02
+#define QDIO_FLAG_UNDER_INTERRUPT 0x04
+#define QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT 0x08 /* no effect on
+						     adapter interrupts */
+#define QDIO_FLAG_DONT_SIGA 0x10
+
+extern int do_QDIO(struct ccw_device*, unsigned int flags, 
+		   unsigned int queue_number,
+		   unsigned int qidx,unsigned int count,
+		   struct qdio_buffer *buffers);
+
+extern int qdio_synchronize(struct ccw_device*, unsigned int flags,
+			    unsigned int queue_number);
+
+extern int qdio_cleanup(struct ccw_device*, int how);
+extern int qdio_shutdown(struct ccw_device*, int how);
+extern int qdio_free(struct ccw_device*);
+
+unsigned char qdio_get_slsb_state(struct ccw_device*, unsigned int flag,
+				  unsigned int queue_number,
+				  unsigned int qidx);
+
+extern void qdio_init_scrubber(void);
+
+struct qdesfmt0 {
+#ifdef QDIO_32_BIT
+	unsigned long res1;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long sliba;            /* storage-list-information-block
+					   address */
+#ifdef QDIO_32_BIT
+	unsigned long res2;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long sla;              /* storage-list address */
+#ifdef QDIO_32_BIT
+	unsigned long res3;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long slsba;            /* storage-list-state-block address */
+	unsigned int  res4;		/* reserved */
+	unsigned int  akey  :  4;       /* access key for DLIB */
+	unsigned int  bkey  :  4;       /* access key for SL */
+	unsigned int  ckey  :  4;       /* access key for SBALs */
+	unsigned int  dkey  :  4;       /* access key for SLSB */
+	unsigned int  res5  : 16;       /* reserved */
+} __attribute__ ((packed));
+
+/*
+ * Queue-Description record (QDR)
+ */
+struct qdr {
+	unsigned int  qfmt    :  8;     /* queue format */
+	unsigned int  pfmt    :  8;     /* impl. dep. parameter format */
+	unsigned int  res1    :  8;     /* reserved */
+	unsigned int  ac      :  8;     /* adapter characteristics */
+	unsigned int  res2    :  8;     /* reserved */
+	unsigned int  iqdcnt  :  8;     /* input-queue-descriptor count */
+	unsigned int  res3    :  8;     /* reserved */
+	unsigned int  oqdcnt  :  8;     /* output-queue-descriptor count */
+	unsigned int  res4    :  8;     /* reserved */
+	unsigned int  iqdsz   :  8;     /* input-queue-descriptor size */
+	unsigned int  res5    :  8;     /* reserved */
+	unsigned int  oqdsz   :  8;     /* output-queue-descriptor size */
+	unsigned int  res6[9];          /* reserved */
+#ifdef QDIO_32_BIT
+	unsigned long res7;		/* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long qiba;             /* queue-information-block address */
+	unsigned int  res8;             /* reserved */
+	unsigned int  qkey    :  4;     /* queue-informatio-block key */
+	unsigned int  res9    : 28;     /* reserved */
+/*	union _qd {*/ /* why this? */
+		struct qdesfmt0 qdf0[126];
+/*	} qd;*/
+} __attribute__ ((packed,aligned(4096)));
+
+
+/*
+ * queue information block (QIB)
+ */
+#define QIB_AC_INBOUND_PCI_SUPPORTED 0x80
+#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40
+struct qib {
+	unsigned int  qfmt    :  8;     /* queue format */
+	unsigned int  pfmt    :  8;     /* impl. dep. parameter format */
+	unsigned int  res1    :  8;     /* reserved */
+	unsigned int  ac      :  8;     /* adapter characteristics */
+	unsigned int  res2;             /* reserved */
+#ifdef QDIO_32_BIT
+	unsigned long res3;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long isliba;           /* absolute address of 1st
+					   input SLIB */
+#ifdef QDIO_32_BIT
+	unsigned long res4;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long osliba;           /* absolute address of 1st
+					   output SLIB */
+	unsigned int  res5;             /* reserved */
+	unsigned int  res6;             /* reserved */
+	unsigned char ebcnam[8];        /* adapter identifier in EBCDIC */
+	unsigned char res7[88];         /* reserved */
+	unsigned char parm[QDIO_MAX_BUFFERS_PER_Q];
+					/* implementation dependent
+					   parameters */
+} __attribute__ ((packed,aligned(256)));
+
+
+/*
+ * storage-list-information block element (SLIBE)
+ */
+struct slibe {
+#ifdef QDIO_32_BIT
+	unsigned long res;              /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long parms;            /* implementation dependent
+					   parameters */
+};
+
+/*
+ * storage-list-information block (SLIB)
+ */
+struct slib {
+#ifdef QDIO_32_BIT
+	unsigned long res1;             /* reserved */
+#endif /* QDIO_32_BIT */
+        unsigned long nsliba;           /* next SLIB address (if any) */
+#ifdef QDIO_32_BIT
+	unsigned long res2;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long sla;              /* SL address */
+#ifdef QDIO_32_BIT
+	unsigned long res3;             /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long slsba;            /* SLSB address */
+	unsigned char res4[1000];       /* reserved */
+	struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];    /* SLIB elements */
+} __attribute__ ((packed,aligned(2048)));
+
+struct sbal_flags {
+	unsigned char res1  : 1;   /* reserved */
+	unsigned char last  : 1;   /* last entry */
+	unsigned char cont  : 1;   /* contiguous storage */
+	unsigned char res2  : 1;   /* reserved */
+	unsigned char frag  : 2;   /* fragmentation (s.below) */
+	unsigned char res3  : 2;   /* reserved */
+} __attribute__ ((packed));
+
+#define SBAL_FLAGS_FIRST_FRAG	     0x04000000UL
+#define SBAL_FLAGS_MIDDLE_FRAG	     0x08000000UL
+#define SBAL_FLAGS_LAST_FRAG	     0x0c000000UL
+#define SBAL_FLAGS_LAST_ENTRY	     0x40000000UL
+#define SBAL_FLAGS_CONTIGUOUS	     0x20000000UL
+
+#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
+
+/* Awesome OpenFCP extensions */
+#define SBAL_FLAGS0_TYPE_STATUS       0x00UL
+#define SBAL_FLAGS0_TYPE_WRITE        0x08UL
+#define SBAL_FLAGS0_TYPE_READ         0x10UL
+#define SBAL_FLAGS0_TYPE_WRITE_READ   0x18UL
+#define SBAL_FLAGS0_MORE_SBALS	      0x04UL
+#define SBAL_FLAGS0_COMMAND           0x02UL
+#define SBAL_FLAGS0_LAST_SBAL         0x00UL
+#define SBAL_FLAGS0_ONLY_SBAL         SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_MIDDLE_SBAL       SBAL_FLAGS0_MORE_SBALS
+#define SBAL_FLAGS0_FIRST_SBAL        SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
+/* Naught of interest beyond this point */
+
+#define SBAL_FLAGS0_PCI		0x40
+struct sbal_sbalf_0 {
+	unsigned char res1  : 1;   /* reserved */
+	unsigned char pci   : 1;   /* PCI indicator */
+	unsigned char cont  : 1;   /* data continuation */
+	unsigned char sbtype: 2;   /* storage-block type (OpenFCP) */
+	unsigned char res2  : 3;   /* reserved */
+} __attribute__ ((packed));
+
+struct sbal_sbalf_1 {
+	unsigned char res1  : 4;   /* reserved */
+	unsigned char key   : 4;   /* storage key */
+} __attribute__ ((packed));
+
+struct sbal_sbalf_14 {
+	unsigned char res1   : 4;  /* reserved */
+	unsigned char erridx : 4;  /* error index */
+} __attribute__ ((packed));
+
+struct sbal_sbalf_15 {
+	unsigned char reason;      /* reserved */
+} __attribute__ ((packed));
+
+union sbal_sbalf {
+	struct sbal_sbalf_0  i0;
+	struct sbal_sbalf_1  i1;
+	struct sbal_sbalf_14 i14;
+	struct sbal_sbalf_15 i15;
+	unsigned char value;
+};
+
+struct sbal_element {
+	union {
+		struct sbal_flags  bits;       /* flags */
+		unsigned char value;
+	} flags;
+	unsigned int  res1  : 16;   /* reserved */
+	union sbal_sbalf  sbalf;       /* SBAL flags */
+	unsigned int  res2  : 16;  /* reserved */
+	unsigned int  count : 16;  /* data count */
+#ifdef QDIO_32_BIT
+	unsigned long res3;        /* reserved */
+#endif /* QDIO_32_BIT */
+	unsigned long addr;        /* absolute data address */
+} __attribute__ ((packed,aligned(16)));
+
+/*
+ * strorage-block access-list (SBAL)
+ */
+struct sbal {
+	struct sbal_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
+} __attribute__ ((packed,aligned(256)));
+
+/*
+ * storage-list (SL)
+ */
+struct sl_element {
+#ifdef QDIO_32_BIT
+        unsigned long res;     /* reserved */
+#endif /* QDIO_32_BIT */
+        unsigned long sbal;    /* absolute SBAL address */
+} __attribute__ ((packed));
+
+struct sl {
+	struct sl_element element[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed,aligned(1024)));
+
+/*
+ * storage-list-state block (SLSB)
+ */
+struct slsb_flags {
+	unsigned char owner  : 2;   /* SBAL owner */
+	unsigned char type   : 1;   /* buffer type */
+	unsigned char state  : 5;   /* processing state */
+} __attribute__ ((packed));
+
+
+struct slsb {
+	union {
+		unsigned char val[QDIO_MAX_BUFFERS_PER_Q];
+		struct slsb_flags flags[QDIO_MAX_BUFFERS_PER_Q];
+	} acc;
+} __attribute__ ((packed,aligned(256)));
+
+/*
+ * SLSB values
+ */
+#define SLSB_OWNER_PROG              1
+#define SLSB_OWNER_CU                2
+
+#define SLSB_TYPE_INPUT              0
+#define SLSB_TYPE_OUTPUT             1
+
+#define SLSB_STATE_NOT_INIT          0
+#define SLSB_STATE_EMPTY             1
+#define SLSB_STATE_PRIMED            2
+#define SLSB_STATE_HALTED          0xe
+#define SLSB_STATE_ERROR           0xf
+
+#define SLSB_P_INPUT_NOT_INIT     0x80
+#define SLSB_P_INPUT_PROCESSING	  0x81
+#define SLSB_CU_INPUT_EMPTY       0x41
+#define SLSB_P_INPUT_PRIMED       0x82
+#define SLSB_P_INPUT_HALTED       0x8E
+#define SLSB_P_INPUT_ERROR        0x8F
+
+#define SLSB_P_OUTPUT_NOT_INIT    0xA0
+#define SLSB_P_OUTPUT_EMPTY       0xA1
+#define SLSB_CU_OUTPUT_PRIMED     0x62
+#define SLSB_P_OUTPUT_HALTED      0xAE
+#define SLSB_P_OUTPUT_ERROR       0xAF
+
+#define SLSB_ERROR_DURING_LOOKUP  0xFF
+
+#endif /* __QDIO_H__ */
diff --git a/include/asm-s390/qeth.h b/include/asm-s390/qeth.h
new file mode 100644
index 000000000000..930d378ef75a
--- /dev/null
+++ b/include/asm-s390/qeth.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-s390/qeth.h
+ *
+ * ioctl definitions for qeth driver
+ *
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Author(s):	Thomas Spatzier <tspat@de.ibm.com>
+ *
+ */
+#ifndef __ASM_S390_QETH_IOCTL_H__
+#define __ASM_S390_QETH_IOCTL_H__
+#include <linux/ioctl.h>
+
+#define SIOC_QETH_ARP_SET_NO_ENTRIES    (SIOCDEVPRIVATE)
+#define SIOC_QETH_ARP_QUERY_INFO        (SIOCDEVPRIVATE + 1)
+#define SIOC_QETH_ARP_ADD_ENTRY         (SIOCDEVPRIVATE + 2)
+#define SIOC_QETH_ARP_REMOVE_ENTRY      (SIOCDEVPRIVATE + 3)
+#define SIOC_QETH_ARP_FLUSH_CACHE       (SIOCDEVPRIVATE + 4)
+#define SIOC_QETH_ADP_SET_SNMP_CONTROL  (SIOCDEVPRIVATE + 5)
+#define SIOC_QETH_GET_CARD_TYPE         (SIOCDEVPRIVATE + 6)
+
+struct qeth_arp_cache_entry {
+	__u8  macaddr[6];
+	__u8  reserved1[2];
+	__u8  ipaddr[16]; /* for both  IPv4 and IPv6 */
+	__u8  reserved2[32];
+} __attribute__ ((packed));
+
+struct qeth_arp_qi_entry7 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry7_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+/*
+ * can be set by user if no "media specific information" is wanted
+ * -> saves a lot of space in user space buffer
+ */
+#define QETH_QARP_STRIP_ENTRIES  0x8000
+#define QETH_QARP_REQUEST_MASK   0x00ff
+
+/* data sent to user space as result of query arp ioctl */
+#define QETH_QARP_USER_DATA_SIZE 20000
+#define QETH_QARP_MASK_OFFSET    4
+#define QETH_QARP_ENTRIES_OFFSET 6
+struct qeth_arp_query_user_data {
+	union {
+		__u32 data_len;		/* set by user space program */
+		__u32 no_entries;	/* set by kernel */
+	} u;
+	__u16 mask_bits;
+	char *entries;
+} __attribute__((packed));
+
+#endif /* __ASM_S390_QETH_IOCTL_H__ */
diff --git a/include/asm-s390/resource.h b/include/asm-s390/resource.h
new file mode 100644
index 000000000000..366c01de04f2
--- /dev/null
+++ b/include/asm-s390/resource.h
@@ -0,0 +1,15 @@
+/*
+ *  include/asm-s390/resource.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/resources.h"
+ */
+
+#ifndef _S390_RESOURCE_H
+#define _S390_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
+
diff --git a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h
new file mode 100644
index 000000000000..8c0cebbfc034
--- /dev/null
+++ b/include/asm-s390/rwsem.h
@@ -0,0 +1,355 @@
+#ifndef _S390_RWSEM_H
+#define _S390_RWSEM_H
+
+/*
+ *  include/asm-s390/rwsem.h
+ *
+ *  S390 version
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
+ */
+
+/*
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#ifndef __s390x__
+#define RWSEM_UNLOCKED_VALUE	0x00000000
+#define RWSEM_ACTIVE_BIAS	0x00000001
+#define RWSEM_ACTIVE_MASK	0x0000ffff
+#define RWSEM_WAITING_BIAS	(-0x00010000)
+#else /* __s390x__ */
+#define RWSEM_UNLOCKED_VALUE	0x0000000000000000L
+#define RWSEM_ACTIVE_BIAS	0x0000000000000001L
+#define RWSEM_ACTIVE_MASK	0x00000000ffffffffL
+#define RWSEM_WAITING_BIAS	(-0x0000000100000000L)
+#endif /* __s390x__ */
+#define RWSEM_ACTIVE_READ_BIAS	RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS	(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialisation
+ */
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   ahi  %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   aghi %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory" );
+	if (old < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: ltr  %1,%0\n"
+		"   jm   1f\n"
+		"   ahi  %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b\n"
+		"1:"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: ltgr %1,%0\n"
+		"   jm   1f\n"
+		"   aghi %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b\n"
+		"1:"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory" );
+	return old >= 0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   a    %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   ag   %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory" );
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long old;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%2)\n"
+		"0: ltr  %0,%0\n"
+		"   jnz  1f\n"
+		"   cs   %0,%4,0(%2)\n"
+		"   jl   0b\n"
+#else /* __s390x__ */
+		"   lg   %0,0(%2)\n"
+		"0: ltgr %0,%0\n"
+		"   jnz  1f\n"
+		"   csg  %0,%4,0(%2)\n"
+		"   jl   0b\n"
+#endif /* __s390x__ */
+		"1:"
+                : "=&d" (old), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory" );
+	return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   ahi  %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   aghi %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (-RWSEM_ACTIVE_READ_BIAS)
+		: "cc", "memory" );
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_ACTIVE_WRITE_BIAS;
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   a    %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   ag   %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory" );
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_WAITING_BIAS;
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   a    %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   ag   %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory" );
+	if (new > 1)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   ar   %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   agr  %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory" );
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	__asm__ __volatile__(
+#ifndef __s390x__
+		"   l    %0,0(%3)\n"
+		"0: lr   %1,%0\n"
+		"   ar   %1,%5\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b"
+#else /* __s390x__ */
+		"   lg   %0,0(%3)\n"
+		"0: lgr  %1,%0\n"
+		"   agr  %1,%5\n"
+		"   csg  %0,%1,0(%3)\n"
+		"   jl   0b"
+#endif /* __s390x__ */
+                : "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory" );
+	return new;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _S390_RWSEM_H */
diff --git a/include/asm-s390/s390_ext.h b/include/asm-s390/s390_ext.h
new file mode 100644
index 000000000000..e9a2862b230d
--- /dev/null
+++ b/include/asm-s390/s390_ext.h
@@ -0,0 +1,34 @@
+#ifndef _S390_EXTINT_H
+#define _S390_EXTINT_H
+
+/*
+ *  include/asm-s390/s390_ext.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+typedef void (*ext_int_handler_t)(struct pt_regs *regs, __u16 code);
+
+/*
+ * Warning: if you change ext_int_info_t you have to change the
+ * external interrupt handler in entry.S too.
+ */ 
+typedef struct ext_int_info_t {
+	struct ext_int_info_t *next;
+	ext_int_handler_t handler;
+	__u16 code;
+} __attribute__ ((packed)) ext_int_info_t;
+
+extern ext_int_info_t *ext_int_hash[];
+
+int register_external_interrupt(__u16 code, ext_int_handler_t handler);
+int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+				      ext_int_info_t *info);
+int unregister_external_interrupt(__u16 code, ext_int_handler_t handler);
+int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+					ext_int_info_t *info);
+
+#endif
diff --git a/include/asm-s390/scatterlist.h b/include/asm-s390/scatterlist.h
new file mode 100644
index 000000000000..a43b3afc5e2d
--- /dev/null
+++ b/include/asm-s390/scatterlist.h
@@ -0,0 +1,16 @@
+#ifndef _ASMS390_SCATTERLIST_H
+#define _ASMS390_SCATTERLIST_H
+
+struct scatterlist {
+    struct page *page;
+    unsigned int offset;
+    unsigned int length;
+};
+
+#ifdef __s390x__
+#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
+#else
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+#endif
+
+#endif /* _ASMS390X_SCATTERLIST_H */
diff --git a/include/asm-s390/sections.h b/include/asm-s390/sections.h
new file mode 100644
index 000000000000..3a0b8ffeab7a
--- /dev/null
+++ b/include/asm-s390/sections.h
@@ -0,0 +1,6 @@
+#ifndef _S390_SECTIONS_H
+#define _S390_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-s390/segment.h b/include/asm-s390/segment.h
new file mode 100644
index 000000000000..8bfce3475b1c
--- /dev/null
+++ b/include/asm-s390/segment.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+#endif
diff --git a/include/asm-s390/semaphore.h b/include/asm-s390/semaphore.h
new file mode 100644
index 000000000000..873def6f363a
--- /dev/null
+++ b/include/asm-s390/semaphore.h
@@ -0,0 +1,110 @@
+/*
+ *  include/asm-s390/semaphore.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/semaphore.h"
+ *    (C) Copyright 1996 Linus Torvalds
+ */
+
+#ifndef _S390_SEMAPHORE_H
+#define _S390_SEMAPHORE_H
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	/*
+	 * Note that any negative value of count is equivalent to 0,
+	 * but additionally indicates that some process(es) might be
+	 * sleeping on `wait'.
+	 */
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name,count) \
+	{ ATOMIC_INIT(count), __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER((*sem),val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	int old_val, new_val;
+
+	/*
+	 * This inline assembly atomically implements the equivalent
+	 * to the following C code:
+	 *   old_val = sem->count.counter;
+	 *   if ((new_val = old_val) > 0)
+	 *       sem->count.counter = --new_val;
+	 * In the ppc code this is called atomic_dec_if_positive.
+	 */
+	__asm__ __volatile__ (
+		"   l    %0,0(%3)\n"
+		"0: ltr  %1,%0\n"
+		"   jle  1f\n"
+		"   ahi  %1,-1\n"
+		"   cs   %0,%1,0(%3)\n"
+		"   jl   0b\n"
+		"1:"
+		: "=&d" (old_val), "=&d" (new_val), "=m" (sem->count.counter)
+		: "a" (&sem->count.counter), "m" (sem->count.counter)
+		: "cc", "memory" );
+	return old_val <= 0;
+}
+
+static inline void up(struct semaphore * sem)
+{
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif
diff --git a/include/asm-s390/sembuf.h b/include/asm-s390/sembuf.h
new file mode 100644
index 000000000000..32626b0cac4b
--- /dev/null
+++ b/include/asm-s390/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _S390_SEMBUF_H
+#define _S390_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t	sem_ctime;		/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SEMBUF_H */
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
new file mode 100644
index 000000000000..0d51c484c2ea
--- /dev/null
+++ b/include/asm-s390/setup.h
@@ -0,0 +1,82 @@
+/*
+ *  include/asm-s390/setup.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390_SETUP_H
+#define _ASM_S390_SETUP_H
+
+#define PARMAREA		0x10400
+#define COMMAND_LINE_SIZE 	896
+#define RAMDISK_ORIGIN		0x800000
+#define RAMDISK_SIZE		0x800000
+#define MEMORY_CHUNKS		16	/* max 0x7fff */
+
+#ifndef __ASSEMBLY__
+
+#ifndef __s390x__
+#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
+#define INITRD_START      (*(unsigned long *)  (0x1040C))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
+#else /* __s390x__ */
+#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
+#define INITRD_START      (*(unsigned long *)  (0x10408))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
+#endif /* __s390x__ */
+#define COMMAND_LINE      ((char *)            (0x10480))
+
+/*
+ * Machine features detected in head.S
+ */
+extern unsigned long machine_flags;
+
+#define MACHINE_IS_VM		(machine_flags & 1)
+#define MACHINE_IS_P390		(machine_flags & 4)
+#define MACHINE_HAS_MVPG	(machine_flags & 16)
+#define MACHINE_HAS_DIAG44	(machine_flags & 32)
+#define MACHINE_HAS_IDTE	(machine_flags & 128)
+
+#ifndef __s390x__
+#define MACHINE_HAS_IEEE	(machine_flags & 2)
+#define MACHINE_HAS_CSP		(machine_flags & 8)
+#else /* __s390x__ */
+#define MACHINE_HAS_IEEE	(1)
+#define MACHINE_HAS_CSP		(1)
+#endif /* __s390x__ */
+
+
+#define MACHINE_HAS_SCLP	(!MACHINE_IS_P390)
+
+/*
+ * Console mode. Override with conmode=
+ */
+extern unsigned int console_mode;
+extern unsigned int console_devno;
+extern unsigned int console_irq;
+
+#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
+#define CONSOLE_IS_SCLP		(console_mode == 1)
+#define CONSOLE_IS_3215		(console_mode == 2)
+#define CONSOLE_IS_3270		(console_mode == 3)
+#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
+#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
+#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
+
+#else 
+
+#ifndef __s390x__
+#define IPL_DEVICE        0x10404
+#define INITRD_START      0x1040C
+#define INITRD_SIZE       0x10414
+#else /* __s390x__ */
+#define IPL_DEVICE        0x10400
+#define INITRD_START      0x10408
+#define INITRD_SIZE       0x10410
+#endif /* __s390x__ */
+#define COMMAND_LINE      0x10480
+
+#endif
+
+#endif
diff --git a/include/asm-s390/sfp-machine.h b/include/asm-s390/sfp-machine.h
new file mode 100644
index 000000000000..3c79b5384f44
--- /dev/null
+++ b/include/asm-s390/sfp-machine.h
@@ -0,0 +1,139 @@
+/* Machine-dependent software floating-point definitions.
+   S/390 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+#include <linux/config.h>
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) + (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	__asm__ ("   alr %2,%3\n"				\
+		 "   brc 12,0f\n"				\
+		 "   lhi 0,1\n"					\
+		 "   alr %1,0\n"				\
+		 "   brc 12,0f\n"				\
+		 "   alr %0,0\n"				\
+		 "0:"						\
+		 : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		 : "d" (y0), "i" (1) : "cc", "0" );		\
+	__asm__ ("   alr %1,%2\n"				\
+		 "   brc 12,0f\n"				\
+		 "   ahi %0,1\n"				\
+		 "0:"						\
+		 : "+&d" (__r2), "+&d" (__r1)			\
+		 : "d" (y1) : "cc" );				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) - (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	__asm__ ("   slr %2,%3\n"				\
+		 "   brc 3,0f\n"				\
+		 "   lhi 0,1\n"					\
+		 "   slr %1,0\n"				\
+		 "   brc 3,0f\n"				\
+		 "   slr %0,0\n"				\
+		 "0:"						\
+		 : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		 : "d" (y0) : "cc", "0" );			\
+	__asm__ ("   slr %1,%2\n"				\
+		 "   brc 3,0f\n"				\
+		 "   ahi %0,-1\n"				\
+		 "0:"						\
+		 : "+&d" (__r2), "+&d" (__r1)			\
+		 : "d" (y1) : "cc" );				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE	mode
+
+/* Exception flags. */
+#define FP_EX_INVALID		0x800000
+#define FP_EX_DIVZERO		0x400000
+#define FP_EX_OVERFLOW		0x200000
+#define FP_EX_UNDERFLOW		0x100000
+#define FP_EX_INEXACT		0x080000
+
+/* We write the results always */
+#define FP_INHIBIT_RESULTS 0
+
+#endif
diff --git a/include/asm-s390/shmbuf.h b/include/asm-s390/shmbuf.h
new file mode 100644
index 000000000000..eed2e280ce37
--- /dev/null
+++ b/include/asm-s390/shmbuf.h
@@ -0,0 +1,48 @@
+#ifndef _S390_SHMBUF_H
+#define _S390_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __s390x__
+	unsigned long		__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __s390x__
+	unsigned long		__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long		__unused3;
+#endif /* ! __s390x__ */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SHMBUF_H */
diff --git a/include/asm-s390/shmparam.h b/include/asm-s390/shmparam.h
new file mode 100644
index 000000000000..c2e0c0508e73
--- /dev/null
+++ b/include/asm-s390/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/shmparam.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/shmparam.h"
+ */
+#ifndef _ASM_S390_SHMPARAM_H
+#define _ASM_S390_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_S390_SHMPARAM_H */
diff --git a/include/asm-s390/sigcontext.h b/include/asm-s390/sigcontext.h
new file mode 100644
index 000000000000..d57bc0cebdce
--- /dev/null
+++ b/include/asm-s390/sigcontext.h
@@ -0,0 +1,69 @@
+/*
+ *  include/asm-s390/sigcontext.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390_SIGCONTEXT_H
+#define _ASM_S390_SIGCONTEXT_H
+
+#define __NUM_GPRS 16
+#define __NUM_FPRS 16
+#define __NUM_ACRS 16
+
+#ifndef __s390x__
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	32
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	96
+
+#else /* __s390x__ */
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	64 
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	160
+
+#endif /* __s390x__ */
+
+#define _SIGCONTEXT_NSIG_WORDS	(_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW)
+#define _SIGMASK_COPY_SIZE	(sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS)
+
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) _psw_t;
+
+typedef struct
+{
+	_psw_t psw;
+	unsigned long gprs[__NUM_GPRS];
+	unsigned int  acrs[__NUM_ACRS];
+} _s390_regs_common;
+
+typedef struct
+{
+	unsigned int fpc;
+	double   fprs[__NUM_FPRS];
+} _s390_fp_regs;
+
+typedef struct
+{
+	_s390_regs_common regs;
+	_s390_fp_regs     fpregs;
+} _sigregs;
+
+struct sigcontext
+{
+	unsigned long	oldmask[_SIGCONTEXT_NSIG_WORDS];
+	_sigregs        *sregs;
+};
+
+
+#endif
+
diff --git a/include/asm-s390/siginfo.h b/include/asm-s390/siginfo.h
new file mode 100644
index 000000000000..72303537b732
--- /dev/null
+++ b/include/asm-s390/siginfo.h
@@ -0,0 +1,24 @@
+/*
+ *  include/asm-s390/siginfo.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/siginfo.h"
+ */
+
+#ifndef _S390_SIGINFO_H
+#define _S390_SIGINFO_H
+
+#ifdef __s390x__
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#ifdef CONFIG_ARCH_S390X
+#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+#else
+#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-s390/signal.h b/include/asm-s390/signal.h
new file mode 100644
index 000000000000..f273cdcd1cf6
--- /dev/null
+++ b/include/asm-s390/signal.h
@@ -0,0 +1,197 @@
+/*
+ *  include/asm-s390/signal.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/signal.h"
+ */
+
+#ifndef _ASMS390_SIGNAL_H
+#define _ASMS390_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+struct pt_regs;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#include <asm/sigcontext.h>
+#define _NSIG           _SIGCONTEXT_NSIG
+#define _NSIG_BPW       _SIGCONTEXT_NSIG_BPW
+#define _NSIG_WORDS     _SIGCONTEXT_NSIG_WORDS
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS		31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+#define SA_INTERRUPT    0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE                SA_ONESHOT
+#define SA_SAMPLE_RANDOM        SA_RESTART
+#define SA_SHIRQ                0x04000000
+#endif
+
+#define SIG_BLOCK          0    /* for blocking signals */
+#define SIG_UNBLOCK        1    /* for unblocking signals */
+#define SIG_SETMASK        2    /* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL ((__sighandler_t)0)     /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1)     /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1)    /* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+#ifndef __s390x__ /* lovely */
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+#else  /* __s390x__ */
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+	sigset_t sa_mask;
+#endif /* __s390x__ */
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+
+#endif
diff --git a/include/asm-s390/sigp.h b/include/asm-s390/sigp.h
new file mode 100644
index 000000000000..3979bc3858e2
--- /dev/null
+++ b/include/asm-s390/sigp.h
@@ -0,0 +1,131 @@
+/*
+ *  include/asm-s390/sigp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ *
+ *  sigp.h by D.J. Barrow (c) IBM 1999
+ *  contains routines / structures for signalling other S/390 processors in an
+ *  SMP configuration.
+ */
+
+#ifndef __SIGP__
+#define __SIGP__
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+
+/* get real cpu address from logical cpu number */
+extern volatile int __cpu_logical_map[];
+
+typedef enum
+{
+	sigp_unassigned=0x0,
+	sigp_sense,
+	sigp_external_call,
+	sigp_emergency_signal,
+	sigp_start,
+	sigp_stop,
+	sigp_restart,
+	sigp_unassigned1,
+	sigp_unassigned2,
+	sigp_stop_and_store_status,
+	sigp_unassigned3,
+	sigp_initial_cpu_reset,
+	sigp_cpu_reset,
+	sigp_set_prefix,
+	sigp_store_status_at_address,
+	sigp_store_extended_status_at_address
+} sigp_order_code;
+
+typedef __u32 sigp_status_word;
+
+typedef enum
+{
+        sigp_order_code_accepted=0,
+	sigp_status_stored,
+	sigp_busy,
+	sigp_not_operational
+} sigp_ccode;
+
+
+/*
+ * Definitions for the external call
+ */
+
+/* 'Bit' signals, asynchronous */
+typedef enum
+{
+	ec_schedule=0,
+	ec_call_function,
+	ec_bit_last
+} ec_bit_sig;
+
+/*
+ * Signal processor
+ */
+extern __inline__ sigp_ccode
+signal_processor(__u16 cpu_addr, sigp_order_code order_code)
+{
+	sigp_ccode ccode;
+
+	__asm__ __volatile__(
+		"    sr     1,1\n"        /* parameter=0 in gpr 1 */
+		"    sigp   1,%1,0(%2)\n"
+		"    ipm    %0\n"
+		"    srl    %0,28\n"
+		: "=d" (ccode)
+		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+		: "cc" , "memory", "1" );
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter
+ */
+extern __inline__ sigp_ccode
+signal_processor_p(__u32 parameter, __u16 cpu_addr,
+		   sigp_order_code order_code)
+{
+	sigp_ccode ccode;
+	
+	__asm__ __volatile__(
+		"    lr     1,%1\n"       /* parameter in gpr 1 */
+		"    sigp   1,%2,0(%3)\n"
+		"    ipm    %0\n"
+		"    srl    %0,28\n"
+		: "=d" (ccode)
+		: "d" (parameter), "d" (__cpu_logical_map[cpu_addr]),
+                  "a" (order_code)
+		: "cc" , "memory", "1" );
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter and return status
+ */
+extern __inline__ sigp_ccode
+signal_processor_ps(__u32 *statusptr, __u32 parameter,
+		    __u16 cpu_addr, sigp_order_code order_code)
+{
+	sigp_ccode ccode;
+	
+	__asm__ __volatile__(
+		"    sr     2,2\n"        /* clear status */
+		"    lr     3,%2\n"       /* parameter in gpr 3 */
+		"    sigp   2,%3,0(%4)\n"
+		"    st     2,%1\n"
+		"    ipm    %0\n"
+		"    srl    %0,28\n"
+		: "=d" (ccode), "=m" (*statusptr)
+		: "d" (parameter), "d" (__cpu_logical_map[cpu_addr]),
+                  "a" (order_code)
+		: "cc" , "memory", "2" , "3"
+		);
+   return ccode;
+}
+
+#endif /* __SIGP__ */
diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h
new file mode 100644
index 000000000000..9473786387a3
--- /dev/null
+++ b/include/asm-s390/smp.h
@@ -0,0 +1,108 @@
+/*
+ *  include/asm-s390/smp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+
+#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
+
+#include <asm/lowcore.h>
+#include <asm/sigp.h>
+
+/*
+  s390 specific smp.c headers
+ */
+typedef struct
+{
+	int        intresting;
+	sigp_ccode ccode; 
+	__u32      status;
+	__u16      cpu;
+} sigp_info;
+
+extern int smp_call_function_on(void (*func) (void *info), void *info,
+				int nonatomic, int wait, int cpu);
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+
+/*
+ *	This magic constant controls our willingness to transfer
+ *	a process across CPUs. Such a transfer incurs misses on the L1
+ *	cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
+ *	gut feeling is this will vary by board in value. For a board
+ *	with separate L2 cache it probably depends also on the RSS, and
+ *	for a board with shared L2 cache it ought to decay fast as other
+ *	processes are run.
+ */
+ 
+#define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
+
+#define smp_processor_id() (S390_lowcore.cpu_data.cpu_nr)
+
+extern int smp_get_cpu(cpumask_t cpu_map);
+extern void smp_put_cpu(int cpu);
+
+extern __inline__ __u16 hard_smp_processor_id(void)
+{
+        __u16 cpu_address;
+ 
+        __asm__ ("stap %0\n" : "=m" (cpu_address));
+        return cpu_address;
+}
+
+/*
+ * returns 1 if cpu is in stopped/check stopped state or not operational
+ * returns 0 otherwise
+ */
+static inline int
+smp_cpu_not_running(int cpu)
+{
+	__u32 status;
+
+	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	case sigp_order_code_accepted:
+	case sigp_status_stored:
+		/* Check for stopped and check stop state */
+		if (status & 0x50)
+			return 1;
+		break;
+	case sigp_not_operational:
+		return 1;
+	default:
+		break;
+	}
+	return 0;
+}
+
+#define cpu_logical_map(cpu) (cpu)
+
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+
+#endif
+
+#ifndef CONFIG_SMP
+static inline int
+smp_call_function_on(void (*func) (void *info), void *info,
+		     int nonatomic, int wait, int cpu)
+{
+	func(info);
+	return 0;
+}
+#define smp_get_cpu(cpu) ({ 0; })
+#define smp_put_cpu(cpu) ({ 0; })
+#endif
+
+#endif
diff --git a/include/asm-s390/socket.h b/include/asm-s390/socket.h
new file mode 100644
index 000000000000..0e96eeca4e6b
--- /dev/null
+++ b/include/asm-s390/socket.h
@@ -0,0 +1,58 @@
+/*
+ *  include/asm-s390/socket.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/socket.h"
+ */
+
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-s390/sockios.h b/include/asm-s390/sockios.h
new file mode 100644
index 000000000000..412aeb4dd6ce
--- /dev/null
+++ b/include/asm-s390/sockios.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-s390/sockios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/sockios.h"
+ */
+
+#ifndef __ARCH_S390_SOCKIOS__
+#define __ARCH_S390_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-s390/spinlock.h b/include/asm-s390/spinlock.h
new file mode 100644
index 000000000000..53cc736b9820
--- /dev/null
+++ b/include/asm-s390/spinlock.h
@@ -0,0 +1,251 @@
+/*
+ *  include/asm-s390/spinlock.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/spinlock.h"
+ */
+
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#ifdef __s390x__
+/*
+ * Grmph, take care of %&#! user space programs that include
+ * asm/spinlock.h. The diagnose is only available in kernel
+ * context.
+ */
+#ifdef __KERNEL__
+#include <asm/lowcore.h>
+#define __DIAG44_INSN "ex"
+#define __DIAG44_OPERAND __LC_DIAG44_OPCODE
+#else
+#define __DIAG44_INSN "#"
+#define __DIAG44_OPERAND 0
+#endif
+#endif /* __s390x__ */
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} __attribute__ ((aligned (4))) spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+#define spin_lock_init(lp) do { (lp)->lock = 0; } while(0)
+#define spin_unlock_wait(lp)	do { barrier(); } while(((volatile spinlock_t *)(lp))->lock)
+#define spin_is_locked(x) ((x)->lock != 0)
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+extern inline void _raw_spin_lock(spinlock_t *lp)
+{
+#ifndef __s390x__
+	unsigned int reg1, reg2;
+        __asm__ __volatile__("    bras  %0,1f\n"
+                           "0:  diag  0,0,68\n"
+                           "1:  slr   %1,%1\n"
+                           "    cs    %1,%0,0(%3)\n"
+                           "    jl    0b\n"
+                           : "=&d" (reg1), "=&d" (reg2), "=m" (lp->lock)
+			   : "a" (&lp->lock), "m" (lp->lock)
+			   : "cc", "memory" );
+#else /* __s390x__ */
+	unsigned long reg1, reg2;
+        __asm__ __volatile__("    bras  %1,1f\n"
+                           "0:  " __DIAG44_INSN " 0,%4\n"
+                           "1:  slr   %0,%0\n"
+                           "    cs    %0,%1,0(%3)\n"
+                           "    jl    0b\n"
+                           : "=&d" (reg1), "=&d" (reg2), "=m" (lp->lock)
+			   : "a" (&lp->lock), "i" (__DIAG44_OPERAND),
+			     "m" (lp->lock) : "cc", "memory" );
+#endif /* __s390x__ */
+}
+
+extern inline int _raw_spin_trylock(spinlock_t *lp)
+{
+	unsigned long reg;
+	unsigned int result;
+
+	__asm__ __volatile__("    basr  %1,0\n"
+			   "0:  cs    %0,%1,0(%3)"
+			   : "=d" (result), "=&d" (reg), "=m" (lp->lock)
+			   : "a" (&lp->lock), "m" (lp->lock), "0" (0)
+			   : "cc", "memory" );
+	return !result;
+}
+
+extern inline void _raw_spin_unlock(spinlock_t *lp)
+{
+	unsigned int old;
+
+	__asm__ __volatile__("cs %0,%3,0(%4)"
+			   : "=d" (old), "=m" (lp->lock)
+			   : "0" (lp->lock), "d" (0), "a" (lp)
+			   : "cc", "memory" );
+}
+		
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	volatile unsigned long lock;
+	volatile unsigned long owner_pc;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }
+
+#define rwlock_init(x)	do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define read_can_lock(x) ((int)(x)->lock >= 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define write_can_lock(x) ((x)->lock == 0)
+
+#ifndef __s390x__
+#define _raw_read_lock(rw)   \
+        asm volatile("   l     2,0(%1)\n"   \
+                     "   j     1f\n"     \
+                     "0: diag  0,0,68\n" \
+                     "1: la    2,0(2)\n"     /* clear high (=write) bit */ \
+                     "   la    3,1(2)\n"     /* one more reader */ \
+                     "   cs    2,3,0(%1)\n"  /* try to write new value */ \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) : "a" (&(rw)->lock), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#else /* __s390x__ */
+#define _raw_read_lock(rw)   \
+        asm volatile("   lg    2,0(%1)\n"   \
+                     "   j     1f\n"     \
+                     "0: " __DIAG44_INSN " 0,%2\n" \
+                     "1: nihh  2,0x7fff\n" /* clear high (=write) bit */ \
+                     "   la    3,1(2)\n"   /* one more reader */  \
+                     "   csg   2,3,0(%1)\n" /* try to write new value */ \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) \
+		     : "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#endif /* __s390x__ */
+
+#ifndef __s390x__
+#define _raw_read_unlock(rw) \
+        asm volatile("   l     2,0(%1)\n"   \
+                     "   j     1f\n"     \
+                     "0: diag  0,0,68\n" \
+                     "1: lr    3,2\n"    \
+                     "   ahi   3,-1\n"    /* one less reader */ \
+                     "   cs    2,3,0(%1)\n" \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) : "a" (&(rw)->lock), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#else /* __s390x__ */
+#define _raw_read_unlock(rw) \
+        asm volatile("   lg    2,0(%1)\n"   \
+                     "   j     1f\n"     \
+                     "0: " __DIAG44_INSN " 0,%2\n" \
+                     "1: lgr   3,2\n"    \
+                     "   bctgr 3,0\n"    /* one less reader */ \
+                     "   csg   2,3,0(%1)\n" \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) \
+		     : "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#endif /* __s390x__ */
+
+#ifndef __s390x__
+#define _raw_write_lock(rw) \
+        asm volatile("   lhi   3,1\n"    \
+                     "   sll   3,31\n"    /* new lock value = 0x80000000 */ \
+                     "   j     1f\n"     \
+                     "0: diag  0,0,68\n" \
+                     "1: slr   2,2\n"     /* old lock value must be 0 */ \
+                     "   cs    2,3,0(%1)\n" \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) : "a" (&(rw)->lock), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#else /* __s390x__ */
+#define _raw_write_lock(rw) \
+        asm volatile("   llihh 3,0x8000\n" /* new lock value = 0x80...0 */ \
+                     "   j     1f\n"       \
+                     "0: " __DIAG44_INSN " 0,%2\n"   \
+                     "1: slgr  2,2\n"      /* old lock value must be 0 */ \
+                     "   csg   2,3,0(%1)\n" \
+                     "   jl    0b"         \
+                     : "=m" ((rw)->lock) \
+		     : "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#endif /* __s390x__ */
+
+#ifndef __s390x__
+#define _raw_write_unlock(rw) \
+        asm volatile("   slr   3,3\n"     /* new lock value = 0 */ \
+                     "   j     1f\n"     \
+                     "0: diag  0,0,68\n" \
+                     "1: lhi   2,1\n"    \
+                     "   sll   2,31\n"    /* old lock value must be 0x80000000 */ \
+                     "   cs    2,3,0(%1)\n" \
+                     "   jl    0b"       \
+                     : "=m" ((rw)->lock) : "a" (&(rw)->lock), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#else /* __s390x__ */
+#define _raw_write_unlock(rw) \
+        asm volatile("   slgr  3,3\n"      /* new lock value = 0 */ \
+                     "   j     1f\n"       \
+                     "0: " __DIAG44_INSN " 0,%2\n"   \
+                     "1: llihh 2,0x8000\n" /* old lock value must be 0x8..0 */\
+                     "   csg   2,3,0(%1)\n"   \
+                     "   jl    0b"         \
+                     : "=m" ((rw)->lock) \
+		     : "a" (&(rw)->lock), "i" (__DIAG44_OPERAND), \
+		       "m" ((rw)->lock) : "2", "3", "cc", "memory" )
+#endif /* __s390x__ */
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+extern inline int _raw_write_trylock(rwlock_t *rw)
+{
+	unsigned long result, reg;
+	
+	__asm__ __volatile__(
+#ifndef __s390x__
+			     "   lhi  %1,1\n"
+			     "   sll  %1,31\n"
+			     "   cs   %0,%1,0(%3)"
+#else /* __s390x__ */
+			     "   llihh %1,0x8000\n"
+			     "0: csg %0,%1,0(%3)\n"
+#endif /* __s390x__ */
+			     : "=d" (result), "=&d" (reg), "=m" (rw->lock)
+			     : "a" (&rw->lock), "m" (rw->lock), "0" (0UL)
+			     : "cc", "memory" );
+	return result == 0;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-s390/stat.h b/include/asm-s390/stat.h
new file mode 100644
index 000000000000..d92959eebb65
--- /dev/null
+++ b/include/asm-s390/stat.h
@@ -0,0 +1,105 @@
+/*
+ *  include/asm-s390/stat.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/stat.h"
+ */
+
+#ifndef _S390_STAT_H
+#define _S390_STAT_H
+
+#ifndef __s390x__
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned short st_dev;
+        unsigned short __pad1;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned short __pad2;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long	st_dev;
+        unsigned int    __pad1;
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+        unsigned long long	st_rdev;
+        unsigned int    __pad3;
+        long long	st_size;
+        unsigned long   st_blksize;
+        unsigned char   __pad4[4];
+        unsigned long   __pad5;     /* future possible st_blocks high bits */
+        unsigned long   st_blocks;  /* Number 512-byte blocks allocated. */
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;  /* will be high 32 bits of ctime someday */
+        unsigned long long	st_ino;
+};
+
+#else /* __s390x__ */
+
+struct stat {
+        unsigned long  st_dev;
+        unsigned long  st_ino;
+        unsigned long  st_nlink;
+        unsigned int   st_mode;
+        unsigned int   st_uid;
+        unsigned int   st_gid;
+        unsigned int   __pad1;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+        unsigned long  st_blksize;
+        long           st_blocks;
+        unsigned long  __unused[3];
+};
+
+#endif /* __s390x__ */
+
+#define STAT_HAVE_NSEC 1
+
+#endif
diff --git a/include/asm-s390/statfs.h b/include/asm-s390/statfs.h
new file mode 100644
index 000000000000..099a45579190
--- /dev/null
+++ b/include/asm-s390/statfs.h
@@ -0,0 +1,71 @@
+/*
+ *  include/asm-s390/statfs.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/statfs.h"
+ */
+
+#ifndef _S390_STATFS_H
+#define _S390_STATFS_H
+
+#ifndef __s390x__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+/*
+ * This is ugly -- we're already 64-bit clean, so just duplicate the 
+ * definitions.
+ */
+struct statfs {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct statfs64 {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif /* __s390x__ */
+#endif
diff --git a/include/asm-s390/string.h b/include/asm-s390/string.h
new file mode 100644
index 000000000000..23a4c390489f
--- /dev/null
+++ b/include/asm-s390/string.h
@@ -0,0 +1,137 @@
+/*
+ *  include/asm-s390/string.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#ifndef _S390_STRING_H_
+#define _S390_STRING_H_
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_TYPES_H
+#include <linux/types.h>
+#endif
+
+#define __HAVE_ARCH_MEMCHR	/* inline & arch function */
+#define __HAVE_ARCH_MEMCMP	/* arch function */
+#define __HAVE_ARCH_MEMCPY	/* gcc builtin & arch function */
+#define __HAVE_ARCH_MEMSCAN	/* inline & arch function */
+#define __HAVE_ARCH_MEMSET	/* gcc builtin & arch function */
+#define __HAVE_ARCH_STRCAT	/* inline & arch function */
+#define __HAVE_ARCH_STRCMP	/* arch function */
+#define __HAVE_ARCH_STRCPY	/* inline & arch function */
+#define __HAVE_ARCH_STRLCAT	/* arch function */
+#define __HAVE_ARCH_STRLCPY	/* arch function */
+#define __HAVE_ARCH_STRLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRNCAT	/* arch function */
+#define __HAVE_ARCH_STRNCPY	/* arch function */
+#define __HAVE_ARCH_STRNLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRRCHR	/* arch function */
+#define __HAVE_ARCH_STRSTR	/* arch function */
+
+/* Prototypes for non-inlined arch strings functions. */
+extern int memcmp(const void *, const void *, size_t);
+extern void *memcpy(void *, const void *, size_t);
+extern void *memset(void *, int, size_t);
+extern int strcmp(const char *,const char *);
+extern size_t strlcat(char *, const char *, size_t);
+extern size_t strlcpy(char *, const char *, size_t);
+extern char *strncat(char *, const char *, size_t);
+extern char *strncpy(char *, const char *, size_t);
+extern char *strrchr(const char *, int);
+extern char *strstr(const char *, const char *);
+
+#undef __HAVE_ARCH_MEMMOVE
+#undef __HAVE_ARCH_STRCHR
+#undef __HAVE_ARCH_STRNCHR
+#undef __HAVE_ARCH_STRNCMP
+#undef __HAVE_ARCH_STRNICMP
+#undef __HAVE_ARCH_STRPBRK
+#undef __HAVE_ARCH_STRSEP
+#undef __HAVE_ARCH_STRSPN
+
+#if !defined(IN_ARCH_STRING_C)
+
+static inline void *memchr(const void * s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile ("0: srst  %0,%1\n"
+		      "   jo    0b\n"
+		      "   jl	1f\n"
+		      "   la    %0,0\n"
+		      "1:"
+		      : "+a" (ret), "+&a" (s) : "d" (r0) : "cc" );
+	return (void *) ret;
+}
+
+static inline void *memscan(void *s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile ("0: srst  %0,%1\n"
+		      "   jo    0b\n"
+		      : "+a" (ret), "+&a" (s) : "d" (r0) : "cc" );
+	return (void *) ret;
+}
+
+static inline char *strcat(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	unsigned long dummy;
+	char *ret = dst;
+
+	asm volatile ("0: srst  %0,%1\n"
+		      "   jo    0b\n"
+		      "1: mvst  %0,%2\n"
+		      "   jo    1b"
+		      : "=&a" (dummy), "+a" (dst), "+a" (src)
+		      : "d" (r0), "0" (0) : "cc", "memory" );
+	return ret;
+}
+
+static inline char *strcpy(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	char *ret = dst;
+
+	asm volatile ("0: mvst  %0,%1\n"
+		      "   jo    0b"
+		      : "+&a" (dst), "+&a" (src) : "d" (r0)
+		      : "cc", "memory" );
+	return ret;
+}
+
+static inline size_t strlen(const char *s)
+{
+	register unsigned long r0 asm("0") = 0;
+	const char *tmp = s;
+
+	asm volatile ("0: srst  %0,%1\n"
+		      "   jo    0b"
+		      : "+d" (r0), "+a" (tmp) :  : "cc" );
+	return r0 - (unsigned long) s;
+}
+
+static inline size_t strnlen(const char * s, size_t n)
+{
+	register int r0 asm("0") = 0;
+	const char *tmp = s;
+	const char *end = s + n;
+
+	asm volatile ("0: srst  %0,%1\n"
+		      "   jo    0b"
+		      : "+a" (end), "+a" (tmp) : "d" (r0)  : "cc" );
+	return end - s;
+}
+
+#endif /* !IN_ARCH_STRING_C */
+
+#endif /* __KERNEL__ */
+
+#endif /* __S390_STRING_H_ */
diff --git a/include/asm-s390/suspend.h b/include/asm-s390/suspend.h
new file mode 100644
index 000000000000..1f34580e67a7
--- /dev/null
+++ b/include/asm-s390/suspend.h
@@ -0,0 +1,5 @@
+#ifndef __ASM_S390_SUSPEND_H
+#define __ASM_S390_SUSPEND_H
+
+#endif
+
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
new file mode 100644
index 000000000000..81514d76edcf
--- /dev/null
+++ b/include/asm-s390/system.h
@@ -0,0 +1,477 @@
+/*
+ *  include/asm-s390/system.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *
+ *  Derived from "include/asm-i386/system.h"
+ */
+
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+extern struct task_struct *__switch_to(void *, void *);
+
+#ifdef __s390x__
+#define __FLAG_SHIFT 56
+#else /* ! __s390x__ */
+#define __FLAG_SHIFT 24
+#endif /* ! __s390x__ */
+
+static inline void save_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile (
+		"   std   0,8(%1)\n"
+		"   std   2,24(%1)\n"
+		"   std   4,40(%1)\n"
+		"   std   6,56(%1)"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory" );
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"   stfpc 0(%1)\n"
+		"   std   1,16(%1)\n"
+		"   std   3,32(%1)\n"
+		"   std   5,48(%1)\n"
+		"   std   7,64(%1)\n"
+		"   std   8,72(%1)\n"
+		"   std   9,80(%1)\n"
+		"   std   10,88(%1)\n"
+		"   std   11,96(%1)\n"
+		"   std   12,104(%1)\n"
+		"   std   13,112(%1)\n"
+		"   std   14,120(%1)\n"
+		"   std   15,128(%1)\n"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory" );
+}
+
+static inline void restore_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile (
+		"   ld    0,8(%0)\n"
+		"   ld    2,24(%0)\n"
+		"   ld    4,40(%0)\n"
+		"   ld    6,56(%0)"
+		: : "a" (fpregs), "m" (*fpregs) );
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"   lfpc  0(%0)\n"
+		"   ld    1,16(%0)\n"
+		"   ld    3,32(%0)\n"
+		"   ld    5,48(%0)\n"
+		"   ld    7,64(%0)\n"
+		"   ld    8,72(%0)\n"
+		"   ld    9,80(%0)\n"
+		"   ld    10,88(%0)\n"
+		"   ld    11,96(%0)\n"
+		"   ld    12,104(%0)\n"
+		"   ld    13,112(%0)\n"
+		"   ld    14,120(%0)\n"
+		"   ld    15,128(%0)\n"
+		: : "a" (fpregs), "m" (*fpregs) );
+}
+
+static inline void save_access_regs(unsigned int *acrs)
+{
+	asm volatile ("stam 0,15,0(%0)" : : "a" (acrs) : "memory" );
+}
+
+static inline void restore_access_regs(unsigned int *acrs)
+{
+	asm volatile ("lam 0,15,0(%0)" : : "a" (acrs) );
+}
+
+#define switch_to(prev,next,last) do {					     \
+	if (prev == next)						     \
+		break;							     \
+	save_fp_regs(&prev->thread.fp_regs);				     \
+	restore_fp_regs(&next->thread.fp_regs);				     \
+	save_access_regs(&prev->thread.acrs[0]);			     \
+	restore_access_regs(&next->thread.acrs[0]);			     \
+	prev = __switch_to(prev,next);					     \
+} while (0)
+
+#define prepare_arch_switch(rq, next)	do { } while(0)
+#define task_running(rq, p)		((rq)->curr == (p))
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_user_vtime(struct task_struct *);
+extern void account_system_vtime(struct task_struct *);
+
+#define finish_arch_switch(rq, prev) do {				     \
+	set_fs(current->thread.mm_segment);				     \
+	spin_unlock(&(rq)->lock);					     \
+	account_system_vtime(prev);					     \
+	local_irq_enable();						     \
+} while (0)
+
+#else
+
+#define finish_arch_switch(rq, prev) do {				     \
+	set_fs(current->thread.mm_segment);				     \
+	spin_unlock_irq(&(rq)->lock);					     \
+} while (0)
+
+#endif
+
+#define nop() __asm__ __volatile__ ("nop")
+
+#define xchg(ptr,x) \
+  ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(void *)(ptr),sizeof(*(ptr))))
+
+static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
+{
+	unsigned long addr, old;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"    l   %0,0(%4)\n"
+			"0:  lr  0,%0\n"
+			"    nr  0,%3\n"
+			"    or  0,%2\n"
+			"    cs  %0,0,0(%4)\n"
+			"    jl  0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0" );
+		x = old >> shift;
+		break;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"    l   %0,0(%4)\n"
+			"0:  lr  0,%0\n"
+			"    nr  0,%3\n"
+			"    or  0,%2\n"
+			"    cs  %0,0,0(%4)\n"
+			"    jl  0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0" );
+		x = old >> shift;
+		break;
+	case 4:
+		asm volatile (
+			"    l   %0,0(%3)\n"
+			"0:  cs  %0,%2,0(%3)\n"
+			"    jl  0b\n"
+			: "=&d" (old), "=m" (*(int *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
+			: "memory", "cc" );
+		x = old;
+		break;
+#ifdef __s390x__
+	case 8:
+		asm volatile (
+			"    lg  %0,0(%3)\n"
+			"0:  csg %0,%2,0(%3)\n"
+			"    jl  0b\n"
+			: "=&d" (old), "=m" (*(long *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
+			: "memory", "cc" );
+		x = old;
+		break;
+#endif /* __s390x__ */
+        }
+        return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define cmpxchg(ptr,o,n)\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+					(unsigned long)(n),sizeof(*(ptr))))
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	unsigned long addr, prev, tmp;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"    l   %0,0(%4)\n"
+			"0:  nr  %0,%5\n"
+                        "    lr  %1,%0\n"
+			"    or  %0,%2\n"
+			"    or  %1,%3\n"
+			"    cs  %0,%1,0(%4)\n"
+			"    jnl 1f\n"
+			"    xr  %1,%0\n"
+			"    nr  %1,%5\n"
+			"    jnz 0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(255 << shift))
+			: "memory", "cc" );
+		return prev >> shift;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"    l   %0,0(%4)\n"
+			"0:  nr  %0,%5\n"
+                        "    lr  %1,%0\n"
+			"    or  %0,%2\n"
+			"    or  %1,%3\n"
+			"    cs  %0,%1,0(%4)\n"
+			"    jnl 1f\n"
+			"    xr  %1,%0\n"
+			"    nr  %1,%5\n"
+			"    jnz 0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(65535 << shift))
+			: "memory", "cc" );
+		return prev >> shift;
+	case 4:
+		asm volatile (
+			"    cs  %0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc" );
+		return prev;
+#ifdef __s390x__
+	case 8:
+		asm volatile (
+			"    csg %0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc" );
+		return prev;
+#endif /* __s390x__ */
+        }
+        return old;
+}
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This is very similar to the ppc eieio/sync instruction in that is
+ * does a checkpoint syncronisation & makes sure that 
+ * all memory ops have completed wrt other CPU's ( see 7-15 POP  DJB ).
+ */
+
+#define eieio()  __asm__ __volatile__ ( "bcr 15,0" : : : "memory" ) 
+# define SYNC_OTHER_CORES(x)   eieio() 
+#define mb()    eieio()
+#define rmb()   eieio()
+#define wmb()   eieio()
+#define read_barrier_depends() do { } while(0)
+#define smp_mb()       mb()
+#define smp_rmb()      rmb()
+#define smp_wmb()      wmb()
+#define smp_read_barrier_depends()    read_barrier_depends()
+#define smp_mb__before_clear_bit()     smp_mb()
+#define smp_mb__after_clear_bit()      smp_mb()
+
+
+#define set_mb(var, value)      do { var = value; mb(); } while (0)
+#define set_wmb(var, value)     do { var = value; wmb(); } while (0)
+
+/* interrupt control.. */
+#define local_irq_enable() ({ \
+        unsigned long  __dummy; \
+        __asm__ __volatile__ ( \
+                "stosm 0(%1),0x03" \
+		: "=m" (__dummy) : "a" (&__dummy) : "memory" ); \
+        })
+
+#define local_irq_disable() ({ \
+        unsigned long __flags; \
+        __asm__ __volatile__ ( \
+                "stnsm 0(%1),0xfc" : "=m" (__flags) : "a" (&__flags) ); \
+        __flags; \
+        })
+
+#define local_save_flags(x) \
+        __asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) )
+
+#define local_irq_restore(x) \
+        __asm__ __volatile__("ssm   0(%0)" : : "a" (&x), "m" (x) : "memory")
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+        !((flags >> __FLAG_SHIFT) & 3);	\
+})
+
+#ifdef __s390x__
+
+#define __load_psw(psw) \
+        __asm__ __volatile__("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc" );
+
+#define __ctl_load(array, low, high) ({ \
+	typedef struct { char _[sizeof(array)]; } addrtype; \
+	__asm__ __volatile__ ( \
+		"   bras  1,0f\n" \
+                "   lctlg 0,0,0(%0)\n" \
+		"0: ex    %1,0(1)" \
+		: : "a" (&array), "a" (((low)<<4)+(high)), \
+		    "m" (*(addrtype *)(array)) : "1" ); \
+	})
+
+#define __ctl_store(array, low, high) ({ \
+	typedef struct { char _[sizeof(array)]; } addrtype; \
+	__asm__ __volatile__ ( \
+		"   bras  1,0f\n" \
+		"   stctg 0,0,0(%1)\n" \
+		"0: ex    %2,0(1)" \
+		: "=m" (*(addrtype *)(array)) \
+		: "a" (&array), "a" (((low)<<4)+(high)) : "1" ); \
+	})
+
+#define __ctl_set_bit(cr, bit) ({ \
+        __u8 __dummy[24]; \
+        __asm__ __volatile__ ( \
+                "    bras  1,0f\n"       /* skip indirect insns */ \
+                "    stctg 0,0,0(%1)\n" \
+                "    lctlg 0,0,0(%1)\n" \
+                "0:  ex    %2,0(1)\n"    /* execute stctl */ \
+                "    lg    0,0(%1)\n" \
+                "    ogr   0,%3\n"       /* set the bit */ \
+                "    stg   0,0(%1)\n" \
+                "1:  ex    %2,6(1)"      /* execute lctl */ \
+                : "=m" (__dummy) \
+		: "a" ((((unsigned long) &__dummy) + 7) & ~7UL), \
+		  "a" (cr*17), "a" (1L<<(bit)) \
+                : "cc", "0", "1" ); \
+        })
+
+#define __ctl_clear_bit(cr, bit) ({ \
+        __u8 __dummy[16]; \
+        __asm__ __volatile__ ( \
+                "    bras  1,0f\n"       /* skip indirect insns */ \
+                "    stctg 0,0,0(%1)\n" \
+                "    lctlg 0,0,0(%1)\n" \
+                "0:  ex    %2,0(1)\n"    /* execute stctl */ \
+                "    lg    0,0(%1)\n" \
+                "    ngr   0,%3\n"       /* set the bit */ \
+                "    stg   0,0(%1)\n" \
+                "1:  ex    %2,6(1)"      /* execute lctl */ \
+                : "=m" (__dummy) \
+		: "a" ((((unsigned long) &__dummy) + 7) & ~7UL), \
+		  "a" (cr*17), "a" (~(1L<<(bit))) \
+                : "cc", "0", "1" ); \
+        })
+
+#else /* __s390x__ */
+
+#define __load_psw(psw) \
+	__asm__ __volatile__("lpsw 0(%0)" : : "a" (&psw) : "cc" );
+
+#define __ctl_load(array, low, high) ({ \
+	typedef struct { char _[sizeof(array)]; } addrtype; \
+	__asm__ __volatile__ ( \
+		"   bras  1,0f\n" \
+                "   lctl 0,0,0(%0)\n" \
+		"0: ex    %1,0(1)" \
+		: : "a" (&array), "a" (((low)<<4)+(high)), \
+		    "m" (*(addrtype *)(array)) : "1" ); \
+	})
+
+#define __ctl_store(array, low, high) ({ \
+	typedef struct { char _[sizeof(array)]; } addrtype; \
+	__asm__ __volatile__ ( \
+		"   bras  1,0f\n" \
+		"   stctl 0,0,0(%1)\n" \
+		"0: ex    %2,0(1)" \
+		: "=m" (*(addrtype *)(array)) \
+		: "a" (&array), "a" (((low)<<4)+(high)): "1" ); \
+	})
+
+#define __ctl_set_bit(cr, bit) ({ \
+        __u8 __dummy[16]; \
+        __asm__ __volatile__ ( \
+                "    bras  1,0f\n"       /* skip indirect insns */ \
+                "    stctl 0,0,0(%1)\n" \
+                "    lctl  0,0,0(%1)\n" \
+                "0:  ex    %2,0(1)\n"    /* execute stctl */ \
+                "    l     0,0(%1)\n" \
+                "    or    0,%3\n"       /* set the bit */ \
+                "    st    0,0(%1)\n" \
+                "1:  ex    %2,4(1)"      /* execute lctl */ \
+                : "=m" (__dummy) \
+		: "a" ((((unsigned long) &__dummy) + 7) & ~7UL), \
+		  "a" (cr*17), "a" (1<<(bit)) \
+                : "cc", "0", "1" ); \
+        })
+
+#define __ctl_clear_bit(cr, bit) ({ \
+        __u8 __dummy[16]; \
+        __asm__ __volatile__ ( \
+                "    bras  1,0f\n"       /* skip indirect insns */ \
+                "    stctl 0,0,0(%1)\n" \
+                "    lctl  0,0,0(%1)\n" \
+                "0:  ex    %2,0(1)\n"    /* execute stctl */ \
+                "    l     0,0(%1)\n" \
+                "    nr    0,%3\n"       /* set the bit */ \
+                "    st    0,0(%1)\n" \
+                "1:  ex    %2,4(1)"      /* execute lctl */ \
+                : "=m" (__dummy) \
+		: "a" ((((unsigned long) &__dummy) + 7) & ~7UL), \
+		  "a" (cr*17), "a" (~(1<<(bit))) \
+                : "cc", "0", "1" ); \
+        })
+#endif /* __s390x__ */
+
+/* For spinlocks etc */
+#define local_irq_save(x)	((x) = local_irq_disable())
+
+#ifdef CONFIG_SMP
+
+extern void smp_ctl_set_bit(int cr, int bit);
+extern void smp_ctl_clear_bit(int cr, int bit);
+#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
+
+#else
+
+#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
+
+#endif /* CONFIG_SMP */
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+extern void (*_machine_power_off)(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/include/asm-s390/tape390.h b/include/asm-s390/tape390.h
new file mode 100644
index 000000000000..f1d66ba0deef
--- /dev/null
+++ b/include/asm-s390/tape390.h
@@ -0,0 +1,39 @@
+/*************************************************************************
+ *
+ * tape390.h
+ *         enables user programs to display messages on the tape device
+ *
+ *  S390 and zSeries version
+ *         Copyright (C) 2001 IBM Corporation
+ *         Author(s): Despina Papadopoulou <despina_p@de.ibm.com>
+ *
+ *************************************************************************/
+
+#ifndef _TAPE390_H
+#define _TAPE390_H
+
+#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct)
+
+/*
+ * The TAPE390_DISPLAY ioctl calls the Load Display command
+ * which transfers 17 bytes of data from the channel to the subsystem:
+ *     - 1 format control byte, and
+ *     - two 8-byte messages
+ *
+ * Format control byte:
+ *   0-2: New Message Overlay
+ *     3: Alternate Messages
+ *     4: Blink Message
+ *     5: Display Low/High Message
+ *     6: Reserved
+ *     7: Automatic Load Request
+ *
+ */
+
+typedef struct display_struct {
+        char cntrl;
+        char message1[8];
+        char message2[8];
+} display_struct;
+
+#endif 
diff --git a/include/asm-s390/termbits.h b/include/asm-s390/termbits.h
new file mode 100644
index 000000000000..eb3f8bfabf61
--- /dev/null
+++ b/include/asm-s390/termbits.h
@@ -0,0 +1,181 @@
+/*
+ *  include/asm-s390/termbits.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termbits.h"
+ */
+
+#ifndef __ARCH_S390_TERMBITS_H__
+#define __ARCH_S390_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define  B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h
new file mode 100644
index 000000000000..d1e29cca54c9
--- /dev/null
+++ b/include/asm-s390/termios.h
@@ -0,0 +1,114 @@
+/*
+ *  include/asm-s390/termios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termios.h"
+ */
+
+#ifndef _S390_TERMIOS_H
+#define _S390_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	(termios)->x = (0xffff0000 & ((termios)->x)) | __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _S390_TERMIOS_H */
diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h
new file mode 100644
index 000000000000..aade85c53a63
--- /dev/null
+++ b/include/asm-s390/thread_info.h
@@ -0,0 +1,120 @@
+/*
+ *  include/asm-s390/thread_info.h
+ *
+ *  S390 version
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Size of kernel stack for each process
+ */
+#ifndef __s390x__
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#else
+#define THREAD_ORDER 0
+#define ASYNC_ORDER  0
+#endif
+#else /* __s390x__ */
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 2
+#define ASYNC_ORDER  2
+#else
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#endif
+#endif /* __s390x__ */
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned int		cpu;		/* current CPU */
+	unsigned int		preempt_count; /* 0 => preemptable */
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+	__get_free_pages(GFP_KERNEL,THREAD_ORDER))
+#define free_thread_info(ti) free_pages((unsigned long) (ti),THREAD_ORDER)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif
+
+/*
+ * thread information flags bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+					   TIF_NEED_RESCHED */
+#define TIF_31BIT		18	/* 32bit process */ 
+#define TIF_MEMDIE		19
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_31BIT		(1<<TIF_31BIT)
+
+#endif /* __KERNEL__ */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-s390/timer.h b/include/asm-s390/timer.h
new file mode 100644
index 000000000000..ea0788967c51
--- /dev/null
+++ b/include/asm-s390/timer.h
@@ -0,0 +1,46 @@
+/*
+ *  include/asm-s390/timer.h
+ *
+ *  (C) Copyright IBM Corp. 2003
+ *  Virtual CPU timer
+ *
+ *  Author: Jan Glauber (jang@de.ibm.com)
+ */
+
+#ifndef _ASM_S390_TIMER_H
+#define _ASM_S390_TIMER_H
+
+#include <linux/timer.h>
+
+#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL)
+
+struct vtimer_list {
+	struct list_head entry;
+
+	int cpu;
+	__u64 expires;
+	__u64 interval;
+
+	spinlock_t lock;
+	unsigned long magic;
+
+	void (*function)(unsigned long, struct pt_regs*);
+	unsigned long data;
+};
+
+/* the offset value will wrap after ca. 71 years */
+struct vtimer_queue {
+	struct list_head list;
+	spinlock_t lock;
+	__u64 to_expire;	  /* current event expire time */
+	__u64 offset;		  /* list offset to zero */
+	__u64 idle;		  /* temp var for idle */
+};
+
+extern void init_virt_timer(struct vtimer_list *timer);
+extern void add_virt_timer(void *new);
+extern void add_virt_timer_periodic(void *new);
+extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int del_virt_timer(struct vtimer_list *timer);
+
+#endif
diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h
new file mode 100644
index 000000000000..4848057dafe4
--- /dev/null
+++ b/include/asm-s390/timex.h
@@ -0,0 +1,34 @@
+/*
+ *  include/asm-s390/timex.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/timex.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef _ASM_S390_TIMEX_H
+#define _ASM_S390_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	cycles_t cycles;
+
+	__asm__("stck 0(%1)" : "=m" (cycles) : "a" (&cycles) : "cc");
+	return cycles >> 2;
+}
+
+static inline unsigned long long get_clock (void)
+{
+	unsigned long long clk;
+
+	__asm__("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
+	return clk;
+}
+
+#endif
diff --git a/include/asm-s390/tlb.h b/include/asm-s390/tlb.h
new file mode 100644
index 000000000000..51bd957b85bd
--- /dev/null
+++ b/include/asm-s390/tlb.h
@@ -0,0 +1,20 @@
+#ifndef _S390_TLB_H
+#define _S390_TLB_H
+
+/*
+ * s390 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h
new file mode 100644
index 000000000000..1bb73b0e61fa
--- /dev/null
+++ b/include/asm-s390/tlbflush.h
@@ -0,0 +1,153 @@
+#ifndef _S390_TLBFLUSH_H
+#define _S390_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs 
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+/*
+ * S/390 has three ways of flushing TLBs
+ * 'ptlb' does a flush of the local processor
+ * 'csp' flushes the TLBs on all PUs of a SMP
+ * 'ipte' invalidates a pte in a page table and flushes that out of
+ * the TLBs of all PUs of a SMP
+ */
+
+#define local_flush_tlb() \
+do {  __asm__ __volatile__("ptlb": : :"memory"); } while (0)
+
+#ifndef CONFIG_SMP
+
+/*
+ * We always need to flush, since s390 does not flush tlb
+ * on each context switch
+ */
+
+static inline void flush_tlb(void)
+{
+	local_flush_tlb();
+}
+static inline void flush_tlb_all(void)
+{
+	local_flush_tlb();
+}
+static inline void flush_tlb_mm(struct mm_struct *mm) 
+{
+	local_flush_tlb();
+}
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	local_flush_tlb();
+}
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	local_flush_tlb();
+}
+
+#define flush_tlb_kernel_range(start, end) \
+	local_flush_tlb();
+
+#else
+
+#include <asm/smp.h>
+
+extern void smp_ptlb_all(void);
+
+static inline void global_flush_tlb(void)
+{
+#ifndef __s390x__
+	if (!MACHINE_HAS_CSP) {
+		smp_ptlb_all();
+		return;
+	}
+#endif /* __s390x__ */
+	{
+		register unsigned long addr asm("4");
+		long dummy;
+
+		dummy = 0;
+		addr = ((unsigned long) &dummy) + 1;
+		__asm__ __volatile__ (
+			"    slr  2,2\n"
+			"    slr  3,3\n"
+			"    csp  2,%0"
+			: : "a" (addr), "m" (dummy) : "cc", "2", "3" );
+	}
+}
+
+/*
+ * We only have to do global flush of tlb if process run since last
+ * flush on any other pu than current. 
+ * If we have threads (mm->count > 1) we always do a global flush, 
+ * since the process runs on more than one processor at the same time.
+ */
+
+static inline void __flush_tlb_mm(struct mm_struct * mm)
+{
+	cpumask_t local_cpumask;
+
+	if (unlikely(cpus_empty(mm->cpu_vm_mask)))
+		return;
+	if (MACHINE_HAS_IDTE) {
+		asm volatile (".insn rrf,0xb98e0000,0,%0,%1,0"
+			      : : "a" (2048),
+			      "a" (__pa(mm->pgd)&PAGE_MASK) : "cc" );
+		return;
+	}
+	preempt_disable();
+	local_cpumask = cpumask_of_cpu(smp_processor_id());
+	if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
+		local_flush_tlb();
+	else
+		global_flush_tlb();
+	preempt_enable();
+}
+
+static inline void flush_tlb(void)
+{
+	__flush_tlb_mm(current->mm);
+}
+static inline void flush_tlb_all(void)
+{
+	global_flush_tlb();
+}
+static inline void flush_tlb_mm(struct mm_struct *mm) 
+{
+	__flush_tlb_mm(mm); 
+}
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	__flush_tlb_mm(vma->vm_mm);
+}
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	__flush_tlb_mm(vma->vm_mm); 
+}
+
+#define flush_tlb_kernel_range(start, end) global_flush_tlb()
+
+#endif
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+                                      unsigned long start, unsigned long end)
+{
+        /* S/390 does not keep any page table caches in TLB */
+}
+
+#endif /* _S390_TLBFLUSH_H */
diff --git a/include/asm-s390/todclk.h b/include/asm-s390/todclk.h
new file mode 100644
index 000000000000..c7f62055488a
--- /dev/null
+++ b/include/asm-s390/todclk.h
@@ -0,0 +1,23 @@
+/*
+ * File...........: linux/include/asm/todclk.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * History of changes (starts July 2000)
+ */
+
+#ifndef __ASM_TODCLK_H
+#define __ASM_TODCLK_H
+
+#ifdef __KERNEL__
+
+#define TOD_uSEC (0x1000ULL)
+#define TOD_mSEC (1000 * TOD_uSEC)
+#define TOD_SEC (1000 * TOD_mSEC)
+#define TOD_MIN (60 * TOD_SEC)
+#define TOD_HOUR (60 * TOD_MIN)
+
+#endif
+
+#endif
diff --git a/include/asm-s390/topology.h b/include/asm-s390/topology.h
new file mode 100644
index 000000000000..613aa64019da
--- /dev/null
+++ b/include/asm-s390/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_S390_TOPOLOGY_H
+#define _ASM_S390_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
new file mode 100644
index 000000000000..3fefd61416a5
--- /dev/null
+++ b/include/asm-s390/types.h
@@ -0,0 +1,101 @@
+/*
+ *  include/asm-s390/types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/types.h"
+ */
+
+#ifndef _S390_TYPES_H
+#define _S390_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#ifndef __s390x__
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+#else /* __s390x__ */
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+#endif
+
+/* A address type so that arithmetic can be done on it & it can be upgraded to
+   64 bit when necessary 
+*/
+typedef unsigned long addr_t; 
+typedef __signed__ long saddr_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __s390x__
+#define BITS_PER_LONG 32
+#else
+#define BITS_PER_LONG 64
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+#ifndef __s390x__
+typedef signed long long s64;
+typedef unsigned long long u64;
+#else /* __s390x__ */
+typedef signed long s64;
+typedef unsigned  long u64;
+#endif /* __s390x__ */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#ifndef __s390x__
+typedef union {
+	unsigned long long pair;
+	struct {
+		unsigned long even;
+		unsigned long odd;
+	} subreg;
+} register_pair;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+#endif /* ! __s390x__   */
+#endif /* __ASSEMBLY__  */
+#endif /* __KERNEL__    */
+#endif /* _S390_TYPES_H */
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
new file mode 100644
index 000000000000..a7f43a251f81
--- /dev/null
+++ b/include/asm-s390/uaccess.h
@@ -0,0 +1,436 @@
+/*
+ *  include/asm-s390/uaccess.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/uaccess.h"
+ */
+#ifndef __S390_UACCESS_H
+#define __S390_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/errno.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
+
+
+#define KERNEL_DS       MAKE_MM_SEG(0)
+#define USER_DS         MAKE_MM_SEG(1)
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current->thread.mm_segment)
+
+#ifdef __s390x__
+#define set_fs(x) \
+({									\
+	unsigned long __pto;						\
+	current->thread.mm_segment = (x);				\
+	__pto = current->thread.mm_segment.ar4 ?			\
+		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
+	asm volatile ("lctlg 7,7,%0" : : "m" (__pto) );			\
+})
+#else
+#define set_fs(x) \
+({									\
+	unsigned long __pto;						\
+	current->thread.mm_segment = (x);				\
+	__pto = current->thread.mm_segment.ar4 ?			\
+		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
+	asm volatile ("lctl  7,7,%0" : : "m" (__pto) );			\
+})
+#endif
+
+#define segment_eq(a,b) ((a).ar4 == (b).ar4)
+
+
+#define __access_ok(addr,size) (1)
+
+#define access_ok(type,addr,size) __access_ok(addr,size)
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user *addr,
+						unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+#ifndef __s390x__
+#define __uaccess_fixup \
+	".section .fixup,\"ax\"\n"	\
+	"2: lhi    %0,%4\n"		\
+	"   bras   1,3f\n"		\
+	"   .long  1b\n"		\
+	"3: l      1,0(1)\n"		\
+	"   br     1\n"			\
+	".previous\n"			\
+	".section __ex_table,\"a\"\n"	\
+	"   .align 4\n"			\
+	"   .long  0b,2b\n"		\
+	".previous"
+#define __uaccess_clobber "cc", "1"
+#else /* __s390x__ */
+#define __uaccess_fixup \
+	".section .fixup,\"ax\"\n"	\
+	"2: lghi   %0,%4\n"		\
+	"   jg     1b\n"		\
+	".previous\n"			\
+	".section __ex_table,\"a\"\n"	\
+	"   .align 8\n"			\
+	"   .quad  0b,2b\n"		\
+	".previous"
+#define __uaccess_clobber "cc"
+#endif /* __s390x__ */
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+#define __put_user_asm(x, ptr, err) \
+({								\
+	err = 0;						\
+	asm volatile(						\
+		"0: mvcs  0(%1,%2),%3,%0\n"			\
+		"1:\n"						\
+		__uaccess_fixup					\
+		: "+&d" (err)					\
+		: "d" (sizeof(*(ptr))), "a" (ptr), "Q" (x),	\
+		  "K" (-EFAULT)					\
+		: __uaccess_clobber );				\
+})
+#else
+#define __put_user_asm(x, ptr, err) \
+({								\
+	err = 0;						\
+	asm volatile(						\
+		"0: mvcs  0(%1,%2),0(%3),%0\n"			\
+		"1:\n"						\
+		__uaccess_fixup					\
+		: "+&d" (err)					\
+		: "d" (sizeof(*(ptr))), "a" (ptr), "a" (&(x)),	\
+		  "K" (-EFAULT), "m" (x)			\
+		: __uaccess_clobber );				\
+})
+#endif
+
+#ifndef __CHECKER__
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err;						\
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__put_user_asm(__x, ptr, __pu_err);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+#else
+#define __put_user(x, ptr)			\
+({						\
+	void __user *p;				\
+	p = (ptr);				\
+	0;					\
+})
+#endif
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__put_user(x, ptr);					\
+})
+
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+#define __get_user_asm(x, ptr, err) \
+({								\
+	err = 0;						\
+	asm volatile (						\
+		"0: mvcp  %O1(%2,%R1),0(%3),%0\n"		\
+		"1:\n"						\
+		__uaccess_fixup					\
+		: "+&d" (err), "=Q" (x)				\
+		: "d" (sizeof(*(ptr))), "a" (ptr),		\
+		  "K" (-EFAULT)					\
+		: __uaccess_clobber );				\
+})
+#else
+#define __get_user_asm(x, ptr, err) \
+({								\
+	err = 0;						\
+	asm volatile (						\
+		"0: mvcp  0(%2,%5),0(%3),%0\n"			\
+		"1:\n"						\
+		__uaccess_fixup					\
+		: "+&d" (err), "=m" (x)				\
+		: "d" (sizeof(*(ptr))), "a" (ptr),		\
+		  "K" (-EFAULT), "a" (&(x))			\
+		: __uaccess_clobber );				\
+})
+#endif
+
+#ifndef __CHECKER__
+#define __get_user(x, ptr)					\
+({								\
+	__typeof__(*(ptr)) __x;					\
+	int __gu_err;						\
+	switch (sizeof(*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__get_user_asm(__x, ptr, __gu_err);		\
+		break;						\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	(x) = __x;						\
+	__gu_err;						\
+})
+#else
+#define __get_user(x, ptr)			\
+({						\
+	void __user *p;				\
+	p = (ptr);				\
+	0;					\
+})
+#endif
+
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__get_user(x, ptr);					\
+})
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#define __put_user_unaligned __put_user
+#define __get_user_unaligned __get_user
+
+extern long __copy_to_user_asm(const void *from, long n, void __user *to);
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_to_user_asm(from, n, to);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+extern long __copy_from_user_asm(void *to, long n, const void __user *from);
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_from_user_asm(to, n, from);
+}
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+extern unsigned long __copy_in_user_asm(const void __user *from, long n,
+							void __user *to);
+
+static inline unsigned long
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	return __copy_in_user_asm(from, n, to);
+}
+
+static inline unsigned long
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from,n) && __access_ok(to,n))
+		n = __copy_in_user_asm(from, n, to);
+	return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+extern long __strncpy_from_user_asm(long count, char *dst,
+					const char __user *src);
+
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res = -EFAULT;
+        might_sleep();
+        if (access_ok(VERIFY_READ, src, 1))
+                res = __strncpy_from_user_asm(count, dst, src);
+        return res;
+}
+
+
+extern long __strnlen_user_asm(long count, const char __user *src);
+
+static inline unsigned long
+strnlen_user(const char __user * src, unsigned long n)
+{
+	might_sleep();
+	return __strnlen_user_asm(n, src);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL)
+
+/*
+ * Zero Userspace
+ */
+
+extern long __clear_user_asm(void __user *to, long n);
+
+static inline unsigned long
+__clear_user(void __user *to, unsigned long n)
+{
+	return __clear_user_asm(to, n);
+}
+
+static inline unsigned long
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __clear_user_asm(to, n);
+	return n;
+}
+
+#endif /* __S390_UACCESS_H */
diff --git a/include/asm-s390/ucontext.h b/include/asm-s390/ucontext.h
new file mode 100644
index 000000000000..d69bec0b03f5
--- /dev/null
+++ b/include/asm-s390/ucontext.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-s390/ucontext.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ucontext.h"
+ */
+
+#ifndef _ASM_S390_UCONTEXT_H
+#define _ASM_S390_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	_sigregs          uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_S390_UCONTEXT_H */
diff --git a/include/asm-s390/unaligned.h b/include/asm-s390/unaligned.h
new file mode 100644
index 000000000000..8ee86dbedd1f
--- /dev/null
+++ b/include/asm-s390/unaligned.h
@@ -0,0 +1,24 @@
+/*
+ *  include/asm-s390/unaligned.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/unaligned.h"
+ */
+
+#ifndef __S390_UNALIGNED_H
+#define __S390_UNALIGNED_H
+
+/*
+ * The S390 can do unaligned accesses itself. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
new file mode 100644
index 000000000000..f1a204f7c0f0
--- /dev/null
+++ b/include/asm-s390/unistd.h
@@ -0,0 +1,605 @@
+/*
+ *  include/asm-s390/unistd.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/unistd.h"
+ */
+
+#ifndef _ASM_S390_UNISTD_H_
+#define _ASM_S390_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_restart_syscall	  7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_setpgid             57
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_symlink             83
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_lookup_dcookie     110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg		188
+#define __NR_putpmsg		189
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+#define __NR_readahead		222
+#define __NR_sendfile64		223
+#define __NR_setxattr		224
+#define __NR_lsetxattr		225
+#define __NR_fsetxattr		226
+#define __NR_getxattr		227
+#define __NR_lgetxattr		228
+#define __NR_fgetxattr		229
+#define __NR_listxattr		230
+#define __NR_llistxattr		231
+#define __NR_flistxattr		232
+#define __NR_removexattr	233
+#define __NR_lremovexattr	234
+#define __NR_fremovexattr	235
+#define __NR_gettid		236
+#define __NR_tkill		237
+#define __NR_futex		238
+#define __NR_sched_setaffinity	239
+#define __NR_sched_getaffinity	240
+#define __NR_tgkill		241
+/* Number 242 is reserved for tux */
+#define __NR_io_setup		243
+#define __NR_io_destroy		244
+#define __NR_io_getevents	245
+#define __NR_io_submit		246
+#define __NR_io_cancel		247
+#define __NR_exit_group		248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_set_tid_address	252
+#define __NR_fadvise64		253
+#define __NR_timer_create	254
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+/* Number 263 is reserved for vserver */
+#define __NR_fadvise64_64	264
+#define __NR_statfs64		265
+#define __NR_fstatfs64		266
+#define __NR_remap_file_pages	267
+/* Number 268 is reserved for new sys_mbind */
+/* Number 269 is reserved for new sys_get_mempolicy */
+/* Number 270 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+/* Number 277 is reserved for new sys_kexec_load */
+#define __NR_add_key		278
+#define __NR_request_key	279
+#define __NR_keyctl		280
+#define __NR_waitid		281
+
+#define NR_syscalls 282
+
+/* 
+ * There are some system calls that are not present on 64 bit, some
+ * have a different name although they do the same (e.g. __NR_chown32
+ * is __NR_chown on 64 bit).
+ */
+#ifdef __s390x__
+#undef  __NR_time
+#undef  __NR_lchown
+#undef  __NR_setuid
+#undef  __NR_getuid
+#undef  __NR_stime
+#undef  __NR_setgid
+#undef  __NR_getgid
+#undef  __NR_geteuid
+#undef  __NR_getegid
+#undef  __NR_setreuid
+#undef  __NR_setregid
+#undef  __NR_getrlimit
+#undef  __NR_getgroups
+#undef  __NR_setgroups
+#undef  __NR_fchown
+#undef  __NR_ioperm
+#undef  __NR_setfsuid
+#undef  __NR_setfsgid
+#undef  __NR__llseek
+#undef  __NR__newselect
+#undef  __NR_setresuid
+#undef  __NR_getresuid
+#undef  __NR_setresgid
+#undef  __NR_getresgid
+#undef  __NR_chown
+#undef  __NR_ugetrlimit
+#undef  __NR_mmap2
+#undef  __NR_truncate64
+#undef  __NR_ftruncate64
+#undef  __NR_stat64
+#undef  __NR_lstat64
+#undef  __NR_fstat64
+#undef  __NR_lchown32
+#undef  __NR_getuid32
+#undef  __NR_getgid32
+#undef  __NR_geteuid32
+#undef  __NR_getegid32
+#undef  __NR_setreuid32
+#undef  __NR_setregid32
+#undef  __NR_getgroups32
+#undef  __NR_setgroups32
+#undef  __NR_fchown32
+#undef  __NR_setresuid32
+#undef  __NR_getresuid32
+#undef  __NR_setresgid32
+#undef  __NR_getresgid32
+#undef  __NR_chown32
+#undef  __NR_setuid32
+#undef  __NR_setgid32
+#undef  __NR_setfsuid32
+#undef  __NR_setfsgid32
+#undef  __NR_fcntl64
+#undef  __NR_sendfile64
+#undef  __NR_fadvise64_64
+
+#define __NR_select		142
+#define __NR_getrlimit		191	/* SuS compliant getrlimit */
+#define __NR_lchown  		198
+#define __NR_getuid  		199
+#define __NR_getgid  		200
+#define __NR_geteuid  		201
+#define __NR_getegid  		202
+#define __NR_setreuid  		203
+#define __NR_setregid  		204
+#define __NR_getgroups  	205
+#define __NR_setgroups  	206
+#define __NR_fchown  		207
+#define __NR_setresuid  	208
+#define __NR_getresuid  	209
+#define __NR_setresgid  	210
+#define __NR_getresgid  	211
+#define __NR_chown  		212
+#define __NR_setuid  		213
+#define __NR_setgid  		214
+#define __NR_setfsuid  		215
+#define __NR_setfsgid  		216
+
+#endif
+
+/* user-visible error numbers are in the range -1 - -122: see <asm-s390/errno.h> */
+
+#define __syscall_return(type, res)			     \
+do {							     \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+		errno = -(res);				     \
+		res = -1;				     \
+	}						     \
+	return (type) (res);				     \
+} while (0)
+
+#define _svc_clobber "1", "cc", "memory"
+
+#define _syscall0(type,name)				     \
+type name(void) {					     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la  %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name)			     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#define _syscall1(type,name,type1,arg1)			     \
+type name(type1 arg1) {					     \
+	register type1 __arg1 asm("2") = arg1;		     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la  %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name),			     \
+		  "0" (__arg1)				     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)	     \
+type name(type1 arg1, type2 arg2) {			     \
+	register type1 __arg1 asm("2") = arg1;		     \
+	register type2 __arg2 asm("3") = arg2;		     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name),			     \
+		  "0" (__arg1),				     \
+		  "d" (__arg2)				     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)\
+type name(type1 arg1, type2 arg2, type3 arg3) {		     \
+	register type1 __arg1 asm("2") = arg1;		     \
+	register type2 __arg2 asm("3") = arg2;		     \
+	register type3 __arg3 asm("4") = arg3;		     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la  %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name),			     \
+		  "0" (__arg1),				     \
+		  "d" (__arg2),				     \
+		  "d" (__arg3)				     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,\
+		  type4,name4)				     \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) {  \
+	register type1 __arg1 asm("2") = arg1;		     \
+	register type2 __arg2 asm("3") = arg2;		     \
+	register type3 __arg3 asm("4") = arg3;		     \
+	register type4 __arg4 asm("5") = arg4;		     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la  %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name),			     \
+		  "0" (__arg1),				     \
+		  "d" (__arg2),				     \
+		  "d" (__arg3),				     \
+		  "d" (__arg4)				     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,\
+		  type4,name4,type5,name5)		     \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4,    \
+	  type5 arg5) {					     \
+	register type1 __arg1 asm("2") = arg1;		     \
+	register type2 __arg2 asm("3") = arg2;		     \
+	register type3 __arg3 asm("4") = arg3;		     \
+	register type4 __arg4 asm("5") = arg4;		     \
+	register type5 __arg5 asm("6") = arg5;		     \
+	register long __svcres asm("2");		     \
+	long __res;					     \
+	__asm__ __volatile__ (				     \
+		"    .if %1 < 256\n"			     \
+		"    svc %b1\n"				     \
+		"    .else\n"				     \
+		"    la  %%r1,%1\n"			     \
+		"    svc 0\n"				     \
+		"    .endif"				     \
+		: "=d" (__svcres)			     \
+		: "i" (__NR_##name),			     \
+		  "0" (__arg1),				     \
+		  "d" (__arg2),				     \
+		  "d" (__arg3),				     \
+		  "d" (__arg4),				     \
+		  "d" (__arg5)				     \
+		: _svc_clobber );			     \
+	__res = __svcres;				     \
+	__syscall_return(type,__res);			     \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+# ifdef CONFIG_ARCH_S390_31
+#   define __ARCH_WANT_STAT64
+#   define __ARCH_WANT_SYS_TIME
+# endif
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/stat.h>
+#include <linux/syscalls.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall2(long,stat,char *,filename,struct stat *,statbuf)
+
+static inline pid_t waitpid(int pid, int *wait_stat, int flags)
+{
+	return sys_wait4(pid, wait_stat, flags, NULL);
+}
+struct mmap_arg_struct;
+asmlinkage long sys_mmap2(struct mmap_arg_struct __user *arg);
+
+asmlinkage long sys_execve(struct pt_regs regs);
+asmlinkage long sys_clone(struct pt_regs regs);
+asmlinkage long sys_fork(struct pt_regs regs);
+asmlinkage long sys_vfork(struct pt_regs regs);
+asmlinkage long sys_pipe(unsigned long __user *fildes);
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h
new file mode 100644
index 000000000000..c64f8c181df3
--- /dev/null
+++ b/include/asm-s390/user.h
@@ -0,0 +1,77 @@
+/*
+ *  include/asm-s390/user.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/usr.h"
+ */
+
+#ifndef _S390_USER_H
+#define _S390_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;		/* Where the registers are actually stored */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  struct user_regs_struct *u_ar0;
+				/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _S390_USER_H */
diff --git a/include/asm-s390/vtoc.h b/include/asm-s390/vtoc.h
new file mode 100644
index 000000000000..a14e34e80b88
--- /dev/null
+++ b/include/asm-s390/vtoc.h
@@ -0,0 +1,372 @@
+#ifndef __KERNEL__
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <time.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/hdreg.h>
+#include <asm/dasd.h>
+#endif
+
+
+#define LINE_LENGTH 80
+#define VTOC_START_CC 0x0
+#define VTOC_START_HH 0x1
+#define FIRST_USABLE_CYL 1
+#define FIRST_USABLE_TRK 2
+
+#define DASD_3380_TYPE 13148
+#define DASD_3390_TYPE 13200
+#define DASD_9345_TYPE 37701
+
+#define DASD_3380_VALUE 0xbb60
+#define DASD_3390_VALUE 0xe5a2
+#define DASD_9345_VALUE 0xbc98
+
+#define VOLSER_LENGTH 6
+#define BIG_DISK_SIZE 0x10000
+
+#define VTOC_ERROR "VTOC error:"
+
+
+typedef struct ttr 
+{
+        __u16 tt;
+        __u8  r;
+} __attribute__ ((packed)) ttr_t;
+
+typedef struct cchhb 
+{
+        __u16 cc;
+        __u16 hh;
+        __u8 b;
+} __attribute__ ((packed)) cchhb_t;
+
+typedef struct cchh 
+{
+        __u16 cc;
+        __u16 hh;
+} __attribute__ ((packed)) cchh_t;
+
+typedef struct labeldate 
+{
+        __u8  year;
+        __u16 day;
+} __attribute__ ((packed)) labeldate_t;
+
+
+typedef struct volume_label 
+{
+        char volkey[4];         /* volume key = volume label                 */
+	char vollbl[4];	        /* volume label                              */
+	char volid[6];	        /* volume identifier                         */
+	__u8 security;	        /* security byte                             */
+	cchhb_t vtoc;           /* VTOC address                              */
+	char res1[5];	        /* reserved                                  */
+        char cisize[4];	        /* CI-size for FBA,...                       */
+                                /* ...blanks for CKD                         */
+	char blkperci[4];       /* no of blocks per CI (FBA), blanks for CKD */
+	char labperci[4];       /* no of labels per CI (FBA), blanks for CKD */
+	char res2[4];	        /* reserved                                  */
+	char lvtoc[14];	        /* owner code for LVTOC                      */
+	char res3[29];	        /* reserved                                  */
+} __attribute__ ((packed)) volume_label_t;
+
+
+typedef struct extent 
+{
+        __u8  typeind;          /* extent type indicator                     */
+        __u8  seqno;            /* extent sequence number                    */
+        cchh_t llimit;          /* starting point of this extent             */
+        cchh_t ulimit;          /* ending point of this extent               */
+} __attribute__ ((packed)) extent_t;
+
+
+typedef struct dev_const 
+{
+        __u16 DS4DSCYL;           /* number of logical cyls                  */
+        __u16 DS4DSTRK;           /* number of tracks in a logical cylinder  */
+        __u16 DS4DEVTK;           /* device track length                     */
+        __u8  DS4DEVI;            /* non-last keyed record overhead          */
+        __u8  DS4DEVL;            /* last keyed record overhead              */
+        __u8  DS4DEVK;            /* non-keyed record overhead differential  */
+        __u8  DS4DEVFG;           /* flag byte                               */
+        __u16 DS4DEVTL;           /* device tolerance                        */
+        __u8  DS4DEVDT;           /* number of DSCB's per track              */
+        __u8  DS4DEVDB;           /* number of directory blocks per track    */
+} __attribute__ ((packed)) dev_const_t;
+
+
+typedef struct format1_label 
+{
+	char  DS1DSNAM[44];       /* data set name                           */
+	__u8  DS1FMTID;           /* format identifier                       */
+	char  DS1DSSN[6];         /* data set serial number                  */
+	__u16 DS1VOLSQ;           /* volume sequence number                  */
+	labeldate_t DS1CREDT;     /* creation date: ydd                      */
+	labeldate_t DS1EXPDT;     /* expiration date                         */
+	__u8  DS1NOEPV;           /* number of extents on volume             */
+        __u8  DS1NOBDB;           /* no. of bytes used in last direction blk */
+	__u8  DS1FLAG1;           /* flag 1                                  */
+	char  DS1SYSCD[13];       /* system code                             */
+	labeldate_t DS1REFD;      /* date last referenced                    */
+        __u8  DS1SMSFG;           /* system managed storage indicators       */
+        __u8  DS1SCXTF;           /* sec. space extension flag byte          */
+        __u16 DS1SCXTV;           /* secondary space extension value         */
+        __u8  DS1DSRG1;           /* data set organisation byte 1            */
+        __u8  DS1DSRG2;           /* data set organisation byte 2            */
+  	__u8  DS1RECFM;           /* record format                           */
+	__u8  DS1OPTCD;           /* option code                             */
+	__u16 DS1BLKL;            /* block length                            */
+	__u16 DS1LRECL;           /* record length                           */
+	__u8  DS1KEYL;            /* key length                              */
+	__u16 DS1RKP;             /* relative key position                   */
+	__u8  DS1DSIND;           /* data set indicators                     */
+        __u8  DS1SCAL1;           /* secondary allocation flag byte          */
+  	char DS1SCAL3[3];         /* secondary allocation quantity           */
+	ttr_t DS1LSTAR;           /* last used track and block on track      */
+	__u16 DS1TRBAL;           /* space remaining on last used track      */
+        __u16 res1;               /* reserved                                */
+	extent_t DS1EXT1;         /* first extent description                */
+	extent_t DS1EXT2;         /* second extent description               */
+	extent_t DS1EXT3;         /* third extent description                */
+	cchhb_t DS1PTRDS;         /* possible pointer to f2 or f3 DSCB       */
+} __attribute__ ((packed)) format1_label_t;
+
+
+typedef struct format4_label 
+{
+	char  DS4KEYCD[44];       /* key code for VTOC labels: 44 times 0x04 */
+        __u8  DS4IDFMT;           /* format identifier                       */
+	cchhb_t DS4HPCHR;         /* highest address of a format 1 DSCB      */
+        __u16 DS4DSREC;           /* number of available DSCB's              */
+        cchh_t DS4HCCHH;          /* CCHH of next available alternate track  */
+        __u16 DS4NOATK;           /* number of remaining alternate tracks    */
+        __u8  DS4VTOCI;           /* VTOC indicators                         */
+        __u8  DS4NOEXT;           /* number of extents in VTOC               */
+        __u8  DS4SMSFG;           /* system managed storage indicators       */
+        __u8  DS4DEVAC;           /* number of alternate cylinders. 
+                                     Subtract from first two bytes of 
+                                     DS4DEVSZ to get number of usable
+				     cylinders. can be zero. valid
+				     only if DS4DEVAV on.                    */
+        dev_const_t DS4DEVCT;     /* device constants                        */
+        char DS4AMTIM[8];         /* VSAM time stamp                         */
+        char DS4AMCAT[3];         /* VSAM catalog indicator                  */
+        char DS4R2TIM[8];         /* VSAM volume/catalog match time stamp    */
+        char res1[5];             /* reserved                                */
+        char DS4F6PTR[5];         /* pointer to first format 6 DSCB          */
+        extent_t DS4VTOCE;        /* VTOC extent description                 */
+        char res2[10];            /* reserved                                */
+        __u8 DS4EFLVL;            /* extended free-space management level    */
+        cchhb_t DS4EFPTR;         /* pointer to extended free-space info     */
+        char res3[9];             /* reserved                                */
+} __attribute__ ((packed)) format4_label_t;
+
+
+typedef struct ds5ext 
+{
+	__u16 t;                  /* RTA of the first track of free extent   */
+	__u16 fc;                 /* number of whole cylinders in free ext.  */
+	__u8  ft;                 /* number of remaining free tracks         */
+} __attribute__ ((packed)) ds5ext_t;
+
+
+typedef struct format5_label 
+{
+	char DS5KEYID[4];         /* key identifier                          */
+	ds5ext_t DS5AVEXT;        /* first available (free-space) extent.    */
+	ds5ext_t DS5EXTAV[7];     /* seven available extents                 */
+	__u8 DS5FMTID;            /* format identifier                       */
+	ds5ext_t DS5MAVET[18];    /* eighteen available extents              */
+	cchhb_t DS5PTRDS;         /* pointer to next format5 DSCB            */
+} __attribute__ ((packed)) format5_label_t;
+
+
+typedef struct ds7ext 
+{
+	__u32 a;                  /* starting RTA value                      */
+	__u32 b;                  /* ending RTA value + 1                    */
+} __attribute__ ((packed)) ds7ext_t;
+
+
+typedef struct format7_label 
+{
+	char DS7KEYID[4];         /* key identifier                          */
+	ds7ext_t DS7EXTNT[5];     /* space for 5 extent descriptions         */
+	__u8 DS7FMTID;            /* format identifier                       */
+	ds7ext_t DS7ADEXT[11];    /* space for 11 extent descriptions        */
+	char res1[2];             /* reserved                                */
+	cchhb_t DS7PTRDS;         /* pointer to next FMT7 DSCB               */
+} __attribute__ ((packed)) format7_label_t;
+
+
+char * vtoc_ebcdic_enc (
+        unsigned char source[LINE_LENGTH],
+        unsigned char target[LINE_LENGTH],
+	int l);
+char * vtoc_ebcdic_dec (
+        unsigned char source[LINE_LENGTH],
+	unsigned char target[LINE_LENGTH],
+	int l);
+void vtoc_set_extent (
+        extent_t * ext,
+        __u8 typeind,
+        __u8 seqno,
+        cchh_t * lower,
+        cchh_t * upper);
+void vtoc_set_cchh (
+        cchh_t * addr,
+	__u16 cc,
+	__u16 hh);
+void vtoc_set_cchhb (
+        cchhb_t * addr,
+        __u16 cc,
+        __u16 hh,
+        __u8 b);
+void vtoc_set_date (
+        labeldate_t * d,
+        __u8 year,
+        __u16 day);
+
+void vtoc_volume_label_init (
+	volume_label_t *vlabel);
+
+int vtoc_read_volume_label (
+        char * device,
+        unsigned long vlabel_start,
+        volume_label_t * vlabel);
+
+int vtoc_write_volume_label (
+        char *device,
+        unsigned long vlabel_start,
+        volume_label_t *vlabel);
+
+void vtoc_volume_label_set_volser (
+	volume_label_t *vlabel,
+	char *volser);
+
+char *vtoc_volume_label_get_volser (
+	volume_label_t *vlabel,
+	char *volser);
+
+void vtoc_volume_label_set_key (
+        volume_label_t *vlabel,
+        char *key);     
+
+void vtoc_volume_label_set_label (
+	volume_label_t *vlabel,
+	char *lbl);
+
+char *vtoc_volume_label_get_label (
+	volume_label_t *vlabel,
+	char *lbl);
+
+void vtoc_read_label (
+        char *device,
+        unsigned long position,
+        format1_label_t *f1,
+        format4_label_t *f4,
+        format5_label_t *f5,
+        format7_label_t *f7);
+
+void vtoc_write_label (
+        char *device,
+        unsigned long position,
+        format1_label_t *f1,
+	format4_label_t *f4,
+	format5_label_t *f5,
+	format7_label_t *f7);
+
+
+void vtoc_init_format1_label (
+        char *volid,
+        unsigned int blksize,
+        extent_t *part_extent,
+        format1_label_t *f1);
+
+
+void vtoc_init_format4_label (
+        format4_label_t *f4lbl,
+	unsigned int usable_partitions,
+	unsigned int cylinders,
+	unsigned int tracks,
+	unsigned int blocks,
+	unsigned int blksize,
+	__u16 dev_type);
+
+void vtoc_update_format4_label (
+	format4_label_t *f4,
+	cchhb_t *highest_f1,
+	__u16 unused_update);
+
+
+void vtoc_init_format5_label (
+	format5_label_t *f5);
+
+void vtoc_update_format5_label_add (
+	format5_label_t *f5,
+	int verbose,
+	int cyl,
+	int trk,
+	__u16 a, 
+	__u16 b, 
+	__u8 c);
+ 
+void vtoc_update_format5_label_del (
+	format5_label_t *f5,
+	int verbose,
+	int cyl,
+	int trk,
+	__u16 a, 
+	__u16 b, 
+	__u8 c);
+
+
+void vtoc_init_format7_label (
+	format7_label_t *f7);
+
+void vtoc_update_format7_label_add (
+	format7_label_t *f7,
+	int verbose,
+	__u32 a, 
+	__u32 b);
+
+void vtoc_update_format7_label_del (
+	format7_label_t *f7, 
+	int verbose,
+	__u32 a, 
+	__u32 b);
+
+
+void vtoc_set_freespace(
+	format4_label_t *f4,
+	format5_label_t *f5,
+	format7_label_t *f7,
+	char ch,
+	int verbose,
+	__u32 start,
+	__u32 stop,
+	int cyl,
+	int trk);
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/include/asm-s390/xor.h b/include/asm-s390/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-s390/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h
new file mode 100644
index 000000000000..6e9fca9ee333
--- /dev/null
+++ b/include/asm-sh/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_A_OUT_H
+#define __ASM_SH_A_OUT_H
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __ASM_SH_A_OUT_H */
diff --git a/include/asm-sh/adc.h b/include/asm-sh/adc.h
new file mode 100644
index 000000000000..5f85cf74d59d
--- /dev/null
+++ b/include/asm-sh/adc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ADC_H
+#define __ASM_ADC_H
+#ifdef __KERNEL__
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+#include <asm/cpu/adc.h>
+
+int adc_single(unsigned int channel);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ADC_H */
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
new file mode 100644
index 000000000000..dbb05d1a26d1
--- /dev/null
+++ b/include/asm-sh/addrspace.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/addrspace.h>
+
+/* Memory segments (32bit Priviledged mode addresses)  */
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address   */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/adx/io.h b/include/asm-sh/adx/io.h
new file mode 100644
index 000000000000..ab1225f1d557
--- /dev/null
+++ b/include/asm-sh/adx/io.h
@@ -0,0 +1,86 @@
+/*
+ * include/asm-sh/io_adx.h
+ *
+ * Copyright (C) 2001 A&D Co., Ltd.
+ *
+ * This file may be copied or modified under the terms of the GNU
+ * General Public License.  See linux/COPYING for more information.
+ *
+ * IO functions for an A&D ADX Board
+ */
+
+#ifndef _ASM_SH_IO_ADX_H
+#define _ASM_SH_IO_ADX_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char adx_inb(unsigned long port);
+extern unsigned short adx_inw(unsigned long port);
+extern unsigned int adx_inl(unsigned long port);
+
+extern void adx_outb(unsigned char value, unsigned long port);
+extern void adx_outw(unsigned short value, unsigned long port);
+extern void adx_outl(unsigned int value, unsigned long port);
+
+extern unsigned char adx_inb_p(unsigned long port);
+extern void adx_outb_p(unsigned char value, unsigned long port);
+
+extern void adx_insb(unsigned long port, void *addr, unsigned long count);
+extern void adx_insw(unsigned long port, void *addr, unsigned long count);
+extern void adx_insl(unsigned long port, void *addr, unsigned long count);
+extern void adx_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void adx_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void adx_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned char adx_readb(unsigned long addr);
+extern unsigned short adx_readw(unsigned long addr);
+extern unsigned int adx_readl(unsigned long addr);
+extern void adx_writeb(unsigned char b, unsigned long addr);
+extern void adx_writew(unsigned short b, unsigned long addr);
+extern void adx_writel(unsigned int b, unsigned long addr);
+
+extern void * adx_ioremap(unsigned long offset, unsigned long size);
+extern void adx_iounmap(void *addr);
+
+extern unsigned long adx_isa_port2addr(unsigned long offset);
+
+extern void setup_adx(void);
+extern void init_adx_IRQ(void);
+
+#ifdef __WANT_IO_DEF
+
+#define __inb		adx_inb
+#define __inw		adx_inw
+#define __inl		adx_inl
+#define __outb		adx_outb
+#define __outw		adx_outw
+#define __outl		adx_outl
+
+#define __inb_p		adx_inb_p
+#define __inw_p		adx_inw
+#define __inl_p		adx_inl
+#define __outb_p	adx_outb_p
+#define __outw_p	adx_outw
+#define __outl_p	adx_outl
+
+#define __insb		adx_insb
+#define __insw		adx_insw
+#define __insl		adx_insl
+#define __outsb		adx_outsb
+#define __outsw		adx_outsw
+#define __outsl		adx_outsl
+
+#define __readb		adx_readb
+#define __readw		adx_readw
+#define __readl		adx_readl
+#define __writeb	adx_writeb
+#define __writew	adx_writew
+#define __writel	adx_writel
+
+#define __isa_port2addr	adx_isa_port2addr
+#define __ioremap	adx_ioremap
+#define __iounmap	adx_iounmap
+
+#endif
+
+#endif /* _ASM_SH_IO_AANDD_H */
diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h
new file mode 100644
index 000000000000..3c4f805da1ac
--- /dev/null
+++ b/include/asm-sh/atomic.h
@@ -0,0 +1,114 @@
+#ifndef __ASM_SH_ATOMIC_H
+#define __ASM_SH_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		((v)->counter = (i))
+
+#include <asm/system.h>
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v += i;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v -= i;
+	local_irq_restore(flags);
+}
+
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic_dec(v) atomic_sub(1,(v))
+
+static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v &= ~mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v |= mask;
+	local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing on SH */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __ASM_SH_ATOMIC_H */
diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h
new file mode 100644
index 000000000000..427245f93589
--- /dev/null
+++ b/include/asm-sh/bigsur/bigsur.h
@@ -0,0 +1,80 @@
+/*
+ *
+ * Hitachi Big Sur Eval Board support
+ *
+ * Dustin McIntire (dustin@sensoria.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Derived from Hitachi SH7751 reference manual
+ * 
+ */
+
+#ifndef _ASM_BIGSUR_H_
+#define _ASM_BIGSUR_H_
+
+#include <asm/irq.h>
+#include <asm/hd64465/hd64465.h>
+
+/* 7751 Internal IRQ's used by external CPLD controller */
+#define BIGSUR_IRQ_LOW	0
+#define BIGSUR_IRQ_NUM  14         /* External CPLD level 1 IRQs */
+#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
+#define BIGSUR_2NDLVL_IRQ_LOW   (HD64465_IRQ_BASE+HD64465_IRQ_NUM)  
+#define BIGSUR_2NDLVL_IRQ_NUM   32 /* Level 2 IRQs = 4 regs * 8 bits */
+#define BIGSUR_2NDLVL_IRQ_HIGH  (BIGSUR_2NDLVL_IRQ_LOW + \
+                                 BIGSUR_2NDLVL_IRQ_NUM)
+
+/* PCI interrupt base number (A_INTA-A_INTD) */
+#define BIGSUR_SH7751_PCI_IRQ_BASE  (BIGSUR_2NDLVL_IRQ_LOW+10)  
+
+/* CPLD registers and external chip addresses */
+#define BIGSUR_HD64464_ADDR	0xB2000000
+#define BIGSUR_DGDR	0xB1FFFE00
+#define BIGSUR_BIDR	0xB1FFFD00
+#define BIGSUR_CSLR	0xB1FFFC00
+#define BIGSUR_SW1R	0xB1FFFB00
+#define BIGSUR_DBGR	0xB1FFFA00
+#define BIGSUR_BDTR	0xB1FFF900
+#define BIGSUR_BDRR	0xB1FFF800
+#define BIGSUR_PPR1	0xB1FFF700
+#define BIGSUR_PPR2	0xB1FFF600
+#define BIGSUR_IDE2	0xB1FFF500
+#define BIGSUR_IDE3	0xB1FFF400
+#define BIGSUR_SPCR	0xB1FFF300
+#define BIGSUR_ETHR	0xB1FE0000
+#define BIGSUR_PPDR	0xB1FDFF00
+#define BIGSUR_ICTL	0xB1FDFE00
+#define BIGSUR_ICMD	0xB1FDFD00
+#define BIGSUR_DMA0	0xB1FDFC00
+#define BIGSUR_DMA1	0xB1FDFB00
+#define BIGSUR_IRQ0	0xB1FDFA00
+#define BIGSUR_IRQ1	0xB1FDF900
+#define BIGSUR_IRQ2	0xB1FDF800
+#define BIGSUR_IRQ3	0xB1FDF700
+#define BIGSUR_IMR0	0xB1FDF600
+#define BIGSUR_IMR1	0xB1FDF500
+#define BIGSUR_IMR2	0xB1FDF400
+#define BIGSUR_IMR3	0xB1FDF300
+#define BIGSUR_IRLMR0	0xB1FDF200
+#define BIGSUR_IRLMR1	0xB1FDF100
+#define BIGSUR_V320USC_ADDR  0xB1000000
+#define BIGSUR_HD64465_ADDR  0xB0000000
+#define BIGSUR_INTERNAL_BASE 0xB0000000
+
+/* SMC ethernet card parameters */
+#define BIGSUR_ETHER_IOPORT		0x220
+
+/* IDE register paramters */
+#define BIGSUR_IDECMD_IOPORT	0x1f0
+#define BIGSUR_IDECTL_IOPORT	0x1f8
+
+/* LED bit position in BIGSUR_CSLR */
+#define BIGSUR_LED  (1<<4)
+
+/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
+#define BIGSUR_LSR0_SIZE    (64*(1<<20)) //64MB
+#define BIGSUR_LSR1_SIZE    (64*(1<<20)) //64MB
+
+#endif /* _ASM_BIGSUR_H_ */
diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h
new file mode 100644
index 000000000000..939735ee8dc5
--- /dev/null
+++ b/include/asm-sh/bigsur/io.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/io_bigsur.h
+ *
+ * By Dustin McIntire (dustin@sensoria.com) (c)2001
+ * Derived from io_hd64465.h, which bore the message:
+ * By Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc. 
+ * and from io_hd64461.h, which bore the message:
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a Hitachi Big Sur Evaluation Board.
+ */
+
+#ifndef _ASM_SH_IO_BIGSUR_H
+#define _ASM_SH_IO_BIGSUR_H
+
+#include <linux/types.h>
+
+extern unsigned long bigsur_isa_port2addr(unsigned long offset);
+extern int bigsur_irq_demux(int irq);
+/* Provision for generic secondary demux step -- used by PCMCIA code */
+extern void bigsur_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void bigsur_unregister_irq_demux(int irq);
+/* Set this variable to 1 to see port traffic */
+extern int bigsur_io_debug;
+/* Map a range of ports to a range of kernel virtual memory. */
+extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift);
+extern void bigsur_port_unmap(u32 baseport, u32 nports);
+
+#endif /* _ASM_SH_IO_BIGSUR_H */
+
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
new file mode 100644
index 000000000000..540f12205923
--- /dev/null
+++ b/include/asm-sh/bigsur/serial.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/serial-bigsur.h
+ *
+ * Configuration details for Big Sur 16550 based serial ports 
+ * i.e. HD64465, PCMCIA, etc.
+ */
+
+#ifndef _ASM_SERIAL_BIGSUR_H
+#define _ASM_SERIAL_BIGSUR_H
+#include <asm/hd64465.h>
+
+#define BASE_BAUD (3379200 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+
+#define STD_SERIAL_PORT_DEFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ 
+
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+/* XXX: This should be moved ino irq.h */
+#define irq_cannonicalize(x) (x)
+
+#endif /* _ASM_SERIAL_BIGSUR_H */
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
new file mode 100644
index 000000000000..5163d1ff2f1b
--- /dev/null
+++ b/include/asm-sh/bitops.h
@@ -0,0 +1,476 @@
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+#include <asm/system.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a |= mask;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+static __inline__ void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a ^= mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a ^= mask;
+}
+
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+
+	return retval;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+
+	return retval;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+
+	return retval;
+}
+
+static __inline__ int test_bit(int nr, const volatile void *addr)
+{
+	return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bt/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+static __inline__ int find_next_zero_bit(const unsigned long *addr, int size, int offset)
+{
+	const unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+#ifdef __LITTLE_ENDIAN__
+#define ext2_set_bit(nr, addr) test_and_set_bit((nr), (addr))
+#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr), (addr))
+#define ext2_test_bit(nr, addr) test_bit((nr), (addr))
+#define ext2_find_first_zero_bit(addr, size) find_first_zero_bit((addr), (size))
+#define ext2_find_next_zero_bit(addr, size, offset) \
+                find_next_zero_bit((unsigned long *)(addr), (size), (offset))
+#else
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	int			mask;
+	const volatile unsigned char	*ADDR = (const unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+#endif
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h
new file mode 100644
index 000000000000..70172217140f
--- /dev/null
+++ b/include/asm-sh/bug.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_BUG_H
+#define __ASM_SH_BUG_H
+
+#include <linux/config.h>
+
+/*
+ * Tell the user there is some problem.
+ */
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	*(volatile int *)0 = 0; \
+} while (0)
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
new file mode 100644
index 000000000000..a6de3d06a3d9
--- /dev/null
+++ b/include/asm-sh/bugs.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_SH_BUGS_H
+#define __ASM_SH_BUGS_H
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any Super-H bugs yet.
+ */
+
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+	extern char *get_cpu_subtype(void);
+	extern unsigned long loops_per_jiffy;
+	char *p= &system_utsname.machine[2]; /* "sh" */
+
+	cpu_data->loops_per_jiffy = loops_per_jiffy;
+
+	switch (cpu_data->type) {
+	case CPU_SH7604:
+		*p++ = '2';
+		break;
+	case CPU_SH7705 ... CPU_SH7300:
+		*p++ = '3';
+		break;
+	case CPU_SH7750 ... CPU_SH4_501:
+		*p++ = '4';
+		break;
+	default:
+		*p++ = '?';
+		*p++ = '!';
+		break;
+	}
+
+	printk("CPU: %s\n", get_cpu_subtype());
+
+#ifndef __LITTLE_ENDIAN__
+	/* 'eb' means 'Endian Big' */
+	*p++ = 'e';
+	*p++ = 'b';
+#endif
+	*p = '\0';
+}
+#endif /* __ASM_SH_BUGS_H */
diff --git a/include/asm-sh/bus-sh.h b/include/asm-sh/bus-sh.h
new file mode 100644
index 000000000000..f782a33a98fa
--- /dev/null
+++ b/include/asm-sh/bus-sh.h
@@ -0,0 +1,65 @@
+/*
+ * include/asm-sh/bus-sh.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_BUS_SH_H
+#define __ASM_SH_BUS_SH_H
+
+extern struct bus_type sh_bus_types[];
+
+struct sh_dev {
+	struct device	dev;
+	char		*name;
+	unsigned int	dev_id;
+	unsigned int	bus_id;
+	struct resource	res;
+	void		*mapbase;
+	unsigned int	irq[6];
+	u64		*dma_mask;
+};
+
+#define to_sh_dev(d)	container_of((d), struct sh_dev, dev)
+
+#define sh_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define sh_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, (p))
+
+struct sh_driver {
+	struct device_driver	drv;
+	unsigned int		dev_id;
+	unsigned int		bus_id;
+	int (*probe)(struct sh_dev *);
+	int (*remove)(struct sh_dev *);
+	int (*suspend)(struct sh_dev *, u32);
+	int (*resume)(struct sh_dev *);
+};
+
+#define to_sh_driver(d)	container_of((d), struct sh_driver, drv)
+#define sh_name(d)	((d)->dev.driver->name)
+
+/*
+ * Device ID numbers for bus types
+ */
+enum {
+	SH_DEV_ID_USB_OHCI,
+};
+
+#define SH_NR_BUSES		1
+#define SH_BUS_NAME_VIRT	"shbus"
+
+enum {
+	SH_BUS_VIRT,
+};
+
+/* arch/sh/kernel/cpu/bus.c */
+extern int sh_device_register(struct sh_dev *dev);
+extern void sh_device_unregister(struct sh_dev *dev);
+extern int sh_driver_register(struct sh_driver *drv);
+extern void sh_driver_unregister(struct sh_driver *drv);
+
+#endif /* __ASM_SH_BUS_SH_H */
+
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
new file mode 100644
index 000000000000..bff2b1382e01
--- /dev/null
+++ b/include/asm-sh/byteorder.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_SH_BYTEORDER_H
+#define __ASM_SH_BYTEORDER_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__("swap.b	%0, %0\n\t"
+		"swap.w %0, %0\n\t"
+		"swap.b %0, %0"
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__("swap.b %0, %0"
+		: "=r" (x)
+		:  "0" (x));
+	return x;
+}
+
+static inline __u64 ___arch__swab64(__u64 val) 
+{ 
+	union { 
+		struct { __u32 a,b; } s;
+		__u64 u;
+	} v, w;
+	v.u = val;
+	w.s.b = ___arch__swab32(v.s.a); 
+	w.s.a = ___arch__swab32(v.s.b); 
+	return w.u;	
+} 
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
new file mode 100644
index 000000000000..9b4dd6d8212e
--- /dev/null
+++ b/include/asm-sh/cache.h
@@ -0,0 +1,48 @@
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/cache.h>
+#include <asm/cpu/cacheflush.h>
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+#define SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#define L1_CACHE_ALIGN(x)	(((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+
+#define L1_CACHE_SHIFT_MAX 	5	/* largest L1 which this arch supports */
+
+struct cache_info {
+	unsigned int ways;
+	unsigned int sets;
+	unsigned int linesz;
+
+	unsigned int way_incr;
+
+	unsigned int entry_shift;
+	unsigned int entry_mask;
+
+	unsigned long flags;
+};
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
new file mode 100644
index 000000000000..9dfb33edb008
--- /dev/null
+++ b/include/asm-sh/cacheflush.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/cacheflush.h>
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_icache_user_range(vma, page, vaddr, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/cat68701/io.h b/include/asm-sh/cat68701/io.h
new file mode 100644
index 000000000000..753b8466ad11
--- /dev/null
+++ b/include/asm-sh/cat68701/io.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/io_cat68701.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *           2001 Yutarou Ebihar (ebihara@si-linux.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an AONE Corp. CAT-68701 SH7708 Borad
+ */
+
+#ifndef _ASM_SH_IO_CAT68701_H
+#define _ASM_SH_IO_CAT68701_H
+
+extern unsigned long cat68701_isa_port2addr(unsigned long offset);
+extern int cat68701_irq_demux(int irq);
+
+extern void init_cat68701_IRQ(void);
+extern void heartbeat_cat68701(void);
+
+#endif /* _ASM_SH_IO_CAT68701_H */
diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h
new file mode 100644
index 000000000000..5113c7f8a739
--- /dev/null
+++ b/include/asm-sh/checksum.h
@@ -0,0 +1,216 @@
+#ifndef __ASM_SH_CHECKSUM_H
+#define __ASM_SH_CHECKSUM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
+ */
+
+#include <linux/config.h>
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage unsigned int csum_partial_copy_generic(const unsigned char *src, unsigned char *dst,
+						  int len, int sum, int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions. 
+ *	
+ *	If you use these functions directly please don't forget the 
+ *	verify_area().
+ */
+static __inline__
+unsigned int csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst,
+					int len, int sum)
+{
+	return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL);
+}
+
+static __inline__
+unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst,
+						int len, int sum, int *err_ptr)
+{
+	return csum_partial_copy_generic ( src, dst, len, sum, err_ptr, NULL);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static __inline__ unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int __dummy;
+	__asm__("swap.w %0, %1\n\t"
+		"extu.w	%0, %0\n\t"
+		"extu.w	%1, %1\n\t"
+		"add	%1, %0\n\t"
+		"swap.w	%0, %1\n\t"
+		"add	%1, %0\n\t"
+		"not	%0, %0\n\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "0" (sum)
+		: "t");
+	return sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *      i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
+ *      for linux by * Arnt Gulbrandsen.
+ */
+static __inline__ unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl)
+{
+	unsigned int sum, __dummy0, __dummy1;
+
+	__asm__ __volatile__(
+		"mov.l	@%1+, %0\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"add	#-2, %2\n\t"
+		"clrt\n\t"
+		"1:\t"
+		"addc	%3, %0\n\t"
+		"movt	%4\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"dt	%2\n\t"
+		"bf/s	1b\n\t"
+		" cmp/eq #1, %4\n\t"
+		"addc	%3, %0\n\t"
+		"addc	%2, %0"	    /* Here %2 is 0, add carry-bit */
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
+	: "1" (iph), "2" (ihl)
+	: "t");
+
+	return	csum_fold(sum);
+}
+
+static __inline__ unsigned long csum_tcpudp_nofold(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum) 
+{
+#ifdef __LITTLE_ENDIAN__
+	unsigned long len_proto = (ntohs(len)<<16)+proto*256;
+#else
+	unsigned long len_proto = (proto<<16)+len;
+#endif
+	__asm__("clrt\n\t"
+		"addc	%0, %1\n\t"
+		"addc	%2, %1\n\t"
+		"addc	%3, %1\n\t"
+		"movt	%0\n\t"
+		"add	%1, %0"
+		: "=r" (sum), "=r" (len_proto)
+		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
+		: "t");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static __inline__ unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						       unsigned long daddr,
+						       unsigned short len,
+						       unsigned short proto,
+						       unsigned int sum) 
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static __inline__ unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+    return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						     struct in6_addr *daddr,
+						     __u32 len,
+						     unsigned short proto,
+						     unsigned int sum) 
+{
+	unsigned int __dummy;
+	__asm__("clrt\n\t"
+		"mov.l	@(0,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(0,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"addc	%4, %0\n\t"
+		"addc	%5, %0\n\t"
+		"movt	%1\n\t"
+		"add	%1, %0\n"
+		: "=r" (sum), "=&r" (__dummy)
+		: "r" (saddr), "r" (daddr), 
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "t");
+
+	return csum_fold(sum);
+}
+
+/* 
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ unsigned int csum_and_copy_to_user (const unsigned char *src,
+						      unsigned char __user *dst,
+						      int len, int sum,
+						      int *err_ptr)
+{
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return -1; /* invalid checksum */
+}
+#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/include/asm-sh/cpu-sh2/addrspace.h
new file mode 100644
index 000000000000..8706c903c5a0
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/addrspace.h
@@ -0,0 +1,16 @@
+/*
+ * Definitions for the address spaces of the SH-2 CPUs.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_ADDRSPACE_H
+#define __ASM_CPU_SH2_ADDRSPACE_H
+
+/* Should fill here */
+
+#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
+
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
new file mode 100644
index 000000000000..cd96402e8562
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/cache.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-sh/cpu-sh2/cache.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHE_H
+#define __ASM_CPU_SH2_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define CCR		0xfffffe92	/* Address of Cache Control Register */
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_ID	0x02	/* Instruction Replacement disable */
+#define CCR_CACHE_OD	0x04	/* Data Replacement disable */
+#define CCR_CACHE_TW	0x08	/* Two-way mode */
+#define CCR_CACHE_CP	0x10	/* Cache purge */
+
+#define CACHE_OC_ADDRESS_ARRAY	0x60000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CP
+#define CCR_CACHE_ORA		CCR_CACHE_TW
+#define CCR_CACHE_WT		0x00	/* SH-2 is _always_ write-through */
+
+#endif /* __ASM_CPU_SH2_CACHE_H */
+
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h
new file mode 100644
index 000000000000..f556fa80ea97
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/cacheflush.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/cpu-sh2/cacheflush.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
+#define __ASM_CPU_SH2_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
+
diff --git a/include/asm-sh/cpu-sh2/dma.h b/include/asm-sh/cpu-sh2/dma.h
new file mode 100644
index 000000000000..d66b43cdc637
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/dma.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for the SH-2 DMAC.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_DMA_H
+#define __ASM_CPU_SH2_DMA_H
+
+#define SH_MAX_DMA_CHANNELS	2
+
+#define SAR	((unsigned long[]){ 0xffffff80, 0xffffff90 })
+#define DAR	((unsigned long[]){ 0xffffff84, 0xffffff94 })
+#define DMATCR	((unsigned long[]){ 0xffffff88, 0xffffff98 })
+#define CHCR	((unsigned long[]){ 0xfffffffc, 0xffffff9c })
+
+#define DMAOR	0xffffffb0
+
+#endif /* __ASM_CPU_SH2_DMA_H */
+
diff --git a/include/asm-sh/cpu-sh2/shmparam.h b/include/asm-sh/cpu-sh2/shmparam.h
new file mode 100644
index 000000000000..817c1821ee4b
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/shmparam.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2/shmparam.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_SHMPARAM_H
+#define __ASM_CPU_SH2_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* __ASM_CPU_SH2_SHMPARAM_H */
+
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/include/asm-sh/cpu-sh2/sigcontext.h
new file mode 100644
index 000000000000..fe5c15dd6e87
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
+#define __ASM_CPU_SH2_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+};
+
+#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/include/asm-sh/cpu-sh2/ubc.h
new file mode 100644
index 000000000000..ba0e87f19c7a
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/ubc.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-sh/cpu-sh2/ubc.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_UBC_H
+#define __ASM_CPU_SH2_UBC_H
+
+#define UBC_BARA                0xffffff40
+#define UBC_BAMRA               0xffffff44
+#define UBC_BBRA                0xffffff48
+#define UBC_BARB                0xffffff60
+#define UBC_BAMRB               0xffffff64
+#define UBC_BBRB                0xffffff68
+#define UBC_BDRB                0xffffff70
+#define UBC_BDMRB               0xffffff74
+#define UBC_BRCR                0xffffff78
+
+/*
+ * We don't have any ASID changes to make in the UBC on the SH-2.
+ *
+ * Make these purposely invalid to track misuse.
+ */
+#define UBC_BASRA		0x00000000
+#define UBC_BASRB		0x00000000
+
+#endif /* __ASM_CPU_SH2_UBC_H */
+
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/include/asm-sh/cpu-sh2/watchdog.h
new file mode 100644
index 000000000000..393161c9c6d0
--- /dev/null
+++ b/include/asm-sh/cpu-sh2/watchdog.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-sh/cpu-sh2/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_WATCHDOG_H
+#define __ASM_CPU_SH2_WATCHDOG_H
+
+/*
+ * More SH-2 brilliance .. its not good enough that we can't read
+ * and write the same sizes to WTCNT, now we have to read and write
+ * with different sizes at different addresses for WTCNT _and_ RSTCSR.
+ *
+ * At least on the bright side no one has managed to screw over WTCSR
+ * in this fashion .. yet.
+ */
+/* Register definitions */
+#define WTCNT		0xfffffe80
+#define WTCSR		0xfffffe80
+#define RSTCSR		0xfffffe82
+
+#define WTCNT_R		(WTCNT + 1)
+#define RSTCSR_R	(RSTCSR + 1)
+
+/* Bit definitions */
+#define WTCSR_IOVF	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_TME	0x20
+#define WTCSR_RSTS	0x00
+
+#define RSTCSR_RSTS	0x20
+
+/**
+ * 	sh_wdt_read_rstcsr - Read from Reset Control/Status Register
+ *
+ *	Reads back the RSTCSR value.
+ */
+static inline __u8 sh_wdt_read_rstcsr(void)
+{
+	/*
+	 * Same read/write brain-damage as for WTCNT here..
+	 */
+	return ctrl_inb(RSTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Reset Control/Status Register
+ *
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_rstcsr(__u8 val)
+{
+	/*
+	 * Note: Due to the brain-damaged nature of this register,
+	 * we can't presently touch the WOVF bit, since the upper byte
+	 * has to be swapped for this. So just leave it alone..
+	 */
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+}
+
+#endif /* __ASM_CPU_SH2_WATCHDOG_H */
+
diff --git a/include/asm-sh/cpu-sh3/adc.h b/include/asm-sh/cpu-sh3/adc.h
new file mode 100644
index 000000000000..b289e3ca19a6
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/adc.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_CPU_SH3_ADC_H
+#define __ASM_CPU_SH3_ADC_H
+
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+
+#define ADDRAH	0xa4000080
+#define ADDRAL	0xa4000082
+#define ADDRBH	0xa4000084
+#define ADDRBL	0xa4000086
+#define ADDRCH	0xa4000088
+#define ADDRCL	0xa400008a
+#define ADDRDH	0xa400008c
+#define ADDRDL	0xa400008e
+#define ADCSR	0xa4000090
+
+#define ADCSR_ADF	0x80
+#define ADCSR_ADIE	0x40
+#define ADCSR_ADST	0x20
+#define ADCSR_MULTI	0x10
+#define ADCSR_CKS	0x08
+#define ADCSR_CH_MASK	0x07
+
+#define ADCR	0xa4000092
+
+#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
new file mode 100644
index 000000000000..872e9e1b548c
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/addrspace.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH-3 CPUs.
+ */
+#ifndef __ASM_CPU_SH3_ADDRSPACE_H
+#define __ASM_CPU_SH3_ADDRSPACE_H
+
+/* Should fill here */
+
+#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
+
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
new file mode 100644
index 000000000000..406aa8d9b947
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/cache.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-sh/cpu-sh3/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHE_H
+#define __ASM_CPU_SH3_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define CCR		0xffffffec	/* Address of Cache Control Register */
+
+#define CCR_CACHE_CE	0x01	/* Cache Enable */
+#define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */
+#define CCR_CACHE_CB	0x04	/* Write-Back (for P1) (else writethrough) */
+#define CCR_CACHE_CF	0x08	/* Cache Flush */
+#define CCR_CACHE_ORA	0x20	/* RAM mode */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define CCR3	0xa40000b4
+#define CCR_CACHE_16KB  0x00010000
+#define CCR_CACHE_32KB	0x00020000
+#endif
+
+
+#endif /* __ASM_CPU_SH3_CACHE_H */
+
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
new file mode 100644
index 000000000000..f51aed00c68f
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/cacheflush.h
@@ -0,0 +1,87 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-3, so
+ *  we don't need them.
+ */
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+extern void flush_dcache_page(struct page *pg);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_page_to_ram(page)			do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#define PG_mapped	PG_arch_1
+
+/* We provide our own get_unmapped_area to avoid cache alias issue */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#else
+
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
+
diff --git a/include/asm-sh/cpu-sh3/dac.h b/include/asm-sh/cpu-sh3/dac.h
new file mode 100644
index 000000000000..05fda8316ebc
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/dac.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_CPU_SH3_DAC_H
+#define __ASM_CPU_SH3_DAC_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DADR0	0xa40000a0
+#define DADR1	0xa40000a2
+#define DACR	0xa40000a4
+#define DACR_DAOE1	0x80
+#define DACR_DAOE0	0x40
+#define DACR_DAE	0x20
+
+
+static __inline__ void sh_dac_enable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v |= DACR_DAOE1;
+	else v |= DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_disable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v &= ~DACR_DAOE1;
+	else v &= ~DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_output(u8 value, int channel)
+{
+	if(channel) ctrl_outb(value,DADR1);
+	else ctrl_outb(value,DADR0);
+}
+
+#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
new file mode 100644
index 000000000000..b972e715f9ee
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/dma.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_CPU_SH3_DMA_H
+#define __ASM_CPU_SH3_DMA_H
+
+#define SH_DMAC_BASE	0xa4000020
+
+#endif /* __ASM_CPU_SH3_DMA_H */
+
diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h
new file mode 100644
index 000000000000..b61b6e331df0
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/freq.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/cpu-sh3/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_FREQ_H
+#define __ASM_CPU_SH3_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#define FRQCR			0xa415ff80
+#else
+#define FRQCR			0xffffff80
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		4
+
+#endif /* __ASM_CPU_SH3_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
new file mode 100644
index 000000000000..5cfaa6bcf1ed
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-sh/cpu-sh3/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
+#define __ASM_CPU_SH3_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFFFFFFF0	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFFFFFFF4	/* Page table entry register LOW */
+#define MMU_TTB		0xFFFFFFF8	/* Translation table base register */
+#define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
+
+#define MMUCR		0xFFFFFFE0	/* MMU Control Register */
+
+#define MMU_TLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMU_NTLB_ENTRIES	128	/* for 7708 */
+#define MMU_NTLB_WAYS		4
+#define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
+
+#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
+
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
new file mode 100644
index 000000000000..2d926671115a
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/rtc.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_CPU_SH3_RTC_H
+#define __ASM_CPU_SH3_RTC_H
+
+/* SH-3 RTC */
+#define R64CNT  	0xfffffec0
+#define RSECCNT 	0xfffffec2
+#define RMINCNT 	0xfffffec4
+#define RHRCNT  	0xfffffec6
+#define RWKCNT  	0xfffffec8
+#define RDAYCNT 	0xfffffeca
+#define RMONCNT 	0xfffffecc
+#define RYRCNT  	0xfffffece
+#define RSECAR  	0xfffffed0
+#define RMINAR  	0xfffffed2
+#define RHRAR   	0xfffffed4
+#define RWKAR   	0xfffffed6
+#define RDAYAR  	0xfffffed8
+#define RMONAR  	0xfffffeda
+#define RCR1    	0xfffffedc
+#define RCR2    	0xfffffede
+
+#define RTC_BIT_INVERTED	0	/* No bug on SH7708, SH7709A */
+
+#endif /* __ASM_CPU_SH3_RTC_H */
+
diff --git a/include/asm-sh/cpu-sh3/shmparam.h b/include/asm-sh/cpu-sh3/shmparam.h
new file mode 100644
index 000000000000..da5b5eec81ee
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/shmparam.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh3/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_SHMPARAM_H
+#define __ASM_CPU_SH3_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* __ASM_CPU_SH3_SHMPARAM_H */
+
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
new file mode 100644
index 000000000000..17310dc03dcd
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
+#define __ASM_CPU_SH3_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+};
+
+#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h
new file mode 100644
index 000000000000..3d8e95e8d10c
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/timer.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/cpu-sh3/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_TIMER_H
+#define __ASM_CPU_SH3_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH3 processors
+ *	SH7706
+ *	SH7709S
+ *	SH7727
+ *	SH7729R
+ *	SH7710
+ *	SH7720
+ *	SH7300
+ * ---------------------------------------------------------------------------
+ */
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#define TMU_TSTR	0xa412fe92	/* Byte access */
+
+#define TMU0_TCOR	0xa412fe94	/* Long access */
+#define TMU0_TCNT	0xa412fe98	/* Long access */
+#define TMU0_TCR	0xa412fe9c	/* Word access */
+
+#define TMU1_TCOR	0xa412fea0	/* Long access */
+#define TMU1_TCNT	0xa412fea4	/* Long access */
+#define TMU1_TCR	0xa412fea8	/* Word access */
+
+#define TMU2_TCOR	0xa412feac	/* Long access */
+#define TMU2_TCNT	0xa412feb0	/* Long access */
+#define TMU2_TCR	0xa412feb4	/* Word access */
+
+#else
+#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#define TMU_TOCR	0xfffffe90	/* Byte access */
+#endif
+#define TMU_TSTR	0xfffffe92	/* Byte access */
+
+#define TMU0_TCOR	0xfffffe94	/* Long access */
+#define TMU0_TCNT	0xfffffe98	/* Long access */
+#define TMU0_TCR	0xfffffe9c	/* Word access */
+
+#define TMU1_TCOR	0xfffffea0	/* Long access */
+#define TMU1_TCNT	0xfffffea4	/* Long access */
+#define TMU1_TCR	0xfffffea8	/* Word access */
+
+#define TMU2_TCOR	0xfffffeac	/* Long access */
+#define TMU2_TCNT	0xfffffeb0	/* Long access */
+#define TMU2_TCR	0xfffffeb4	/* Word access */
+#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#define TMU2_TCPR2	0xfffffeb8	/* Long access */
+#endif
+#endif
+
+#endif /* __ASM_CPU_SH3_TIMER_H */
+
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h
new file mode 100644
index 000000000000..0f809dec4e17
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/ubc.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/cpu-sh3/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_UBC_H
+#define __ASM_CPU_SH3_UBC_H
+
+#define UBC_BARA                0xffffffb0
+#define UBC_BAMRA               0xffffffb4
+#define UBC_BBRA                0xffffffb8
+#define UBC_BASRA               0xffffffe4
+#define UBC_BARB                0xffffffa0
+#define UBC_BAMRB               0xffffffa4
+#define UBC_BBRB                0xffffffa8
+#define UBC_BASRB               0xffffffe8
+#define UBC_BDRB                0xffffff90
+#define UBC_BDMRB               0xffffff94
+#define UBC_BRCR                0xffffff98
+
+#endif /* __ASM_CPU_SH3_UBC_H */
+
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/include/asm-sh/cpu-sh3/watchdog.h
new file mode 100644
index 000000000000..4ee0347298d8
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh3/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_WATCHDOG_H
+#define __ASM_CPU_SH3_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffffff84
+#define WTCSR		0xffffff86
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH3_WATCHDOG_H */
+
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h
new file mode 100644
index 000000000000..727634d886ce
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/addrspace.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH-4 CPUs.
+ */
+#ifndef __ASM_CPU_SH4_ADDRSPACE_H
+#define __ASM_CPU_SH4_ADDRSPACE_H
+
+/* Detailed P4SEG  */
+#define P4SEG_STORE_QUE	(P4SEG)
+#define P4SEG_IC_ADDR	0xf0000000
+#define P4SEG_IC_DATA	0xf1000000
+#define P4SEG_ITLB_ADDR	0xf2000000
+#define P4SEG_ITLB_DATA	0xf3000000
+#define P4SEG_OC_ADDR	0xf4000000
+#define P4SEG_OC_DATA	0xf5000000
+#define P4SEG_TLB_ADDR	0xf6000000
+#define P4SEG_TLB_DATA	0xf7000000
+#define P4SEG_REG_BASE	0xff000000
+
+#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
+
diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h
new file mode 100644
index 000000000000..1fe20359312c
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/cache.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/cpu-sh4/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHE_H
+#define __ASM_CPU_SH4_CACHE_H
+
+#define L1_CACHE_SHIFT	5
+
+#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
+#define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
+#define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */
+#define CCR_CACHE_OCI	0x0008	/* OC Invalidate */
+#define CCR_CACHE_ORA	0x0020	/* OC RAM Mode */
+#define CCR_CACHE_OIX	0x0080	/* OC Index Enable */
+#define CCR_CACHE_ICE	0x0100	/* Instruction Cache Enable */
+#define CCR_CACHE_ICI	0x0800	/* IC Invalidate */
+#define CCR_CACHE_IIX	0x8000	/* IC Index Enable */
+#define CCR_CACHE_EMODE	0x80000000	/* EMODE Enable */
+
+/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE|CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI|CCR_CACHE_ICI)
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+
+#endif /* __ASM_CPU_SH4_CACHE_H */
+
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h
new file mode 100644
index 000000000000..f323567e085f
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/cacheflush.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/cpu-sh4/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
+#define __ASM_CPU_SH4_CACHEFLUSH_H
+
+/*
+ *  Caches are broken on SH-4 (unless we use write-through
+ *  caching; in which case they're only semi-broken),
+ *  so we need them.
+ */
+
+/* Page is 4K, OC size is 16K, there are four lines. */
+#define CACHE_ALIAS 0x00003000
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+			      unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+extern void flush_dcache_page(struct page *pg);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_cache_sigtramp(unsigned long addr);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+
+#define flush_icache_page(vma,pg)		do { } while (0)
+
+/* Initialization of P3 area for copy_user_page */
+extern void p3_cache_init(void);
+
+#define PG_mapped	PG_arch_1
+
+/* We provide our own get_unmapped_area to avoid cache alias issue */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_MMU
+extern int remap_area_pages(unsigned long addr, unsigned long phys_addr,
+			    unsigned long size, unsigned long flags);
+#else /* CONFIG_MMU */
+static inline int remap_area_pages(unsigned long addr, unsigned long phys_addr,
+				   unsigned long size, unsigned long flags)
+{
+	return 0;
+}
+#endif /* CONFIG_MMU */
+#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
+
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
new file mode 100644
index 000000000000..e2b91adf821a
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/dma.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#define SH_DMAC_BASE	0xffa00000
+
+#define SAR	((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
+				   SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30})
+#define DAR	((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
+				   SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34})
+#define DMATCR	((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
+				   SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38})
+#define CHCR	((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
+				   SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c})
+#define DMAOR	(SH_DMAC_BASE + 0x40)
+
+#endif /* __ASM_CPU_SH4_DMA_H */
+
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
new file mode 100644
index 000000000000..201d94fd214f
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH73180)
+#define FRQCR		        0xa4150000
+#else
+#define FRQCR			0xffc00000
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h
new file mode 100644
index 000000000000..5b64d041f0b9
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/mmu_context.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-sh/cpu-sh4/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
+#define __ASM_CPU_SH4_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFF000000	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
+#define MMU_TTB		0xFF000008	/* Translation table base register */
+#define MMU_TEA		0xFF00000C	/* TLB Exception Address */
+#define MMU_PTEA	0xFF000034	/* Page table entry assistance register */
+
+#define MMUCR		0xFF000010	/* MMU Control Register */
+
+#define MMU_ITLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMU_NTLB_ENTRIES	64	/* for 7750 */
+#define MMU_CONTROL_INIT	0x205	/* SQMD=1, SV=0, TI=1, AT=1 */
+
+#define MMU_ITLB_DATA_ARRAY	0xF3000000
+#define MMU_UTLB_DATA_ARRAY	0xF7000000
+
+#define MMU_UTLB_ENTRIES	   64
+#define MMU_U_ENTRY_SHIFT	    8
+#define MMU_UTLB_VALID		0x100
+#define MMU_ITLB_ENTRIES	    4
+#define MMU_I_ENTRY_SHIFT	    8
+#define MMU_ITLB_VALID		0x100
+
+#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
+
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h
new file mode 100644
index 000000000000..e091e32a67b7
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/rtc.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_CPU_SH4_RTC_H
+#define __ASM_CPU_SH4_RTC_H
+
+/* SH-4 RTC */
+#define R64CNT  	0xffc80000
+#define RSECCNT 	0xffc80004
+#define RMINCNT 	0xffc80008
+#define RHRCNT  	0xffc8000c
+#define RWKCNT  	0xffc80010
+#define RDAYCNT 	0xffc80014
+#define RMONCNT 	0xffc80018
+#define RYRCNT  	0xffc8001c  /* 16bit */
+#define RSECAR  	0xffc80020
+#define RMINAR  	0xffc80024
+#define RHRAR   	0xffc80028
+#define RWKAR   	0xffc8002c
+#define RDAYAR  	0xffc80030
+#define RMONAR  	0xffc80034
+#define RCR1    	0xffc80038
+#define RCR2    	0xffc8003c
+
+#define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
+
+#endif /* __ASM_CPU_SH4_RTC_H */
+
diff --git a/include/asm-sh/cpu-sh4/shmparam.h b/include/asm-sh/cpu-sh4/shmparam.h
new file mode 100644
index 000000000000..a5a0aa9425fe
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/shmparam.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-sh/cpu-sh4/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_SHMPARAM_H
+#define __ASM_CPU_SH4_SHMPARAM_H
+
+/*
+ * SH-4 has D-cache alias issue
+ */
+#define	SHMLBA (PAGE_SIZE*4)		 /* attach addr a multiple of this */
+
+#endif /* __ASM_CPU_SH4_SHMPARAM_H */
+
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/include/asm-sh/cpu-sh4/sigcontext.h
new file mode 100644
index 000000000000..ab392f120e06
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/sigcontext.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
+#define __ASM_CPU_SH4_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+};
+
+#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h
new file mode 100644
index 000000000000..366b09166d3b
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/sq.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-sh/cpu-sh4/sq.h
+ *
+ * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002  M. R. Brown
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_SQ_H
+#define __ASM_CPU_SH4_SQ_H
+
+#include <asm/addrspace.h>
+
+/*
+ * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
+ * mapped to any physical address space. Since data is written (and aligned)
+ * to 32-byte boundaries, we need to be sure that all allocations are aligned.
+ */ 
+#define SQ_SIZE                 32
+#define SQ_ALIGN_MASK           (~(SQ_SIZE - 1))
+#define SQ_ALIGN(addr)          (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
+
+#define SQ_QACR0		(P4SEG_REG_BASE  + 0x38)
+#define SQ_QACR1		(P4SEG_REG_BASE  + 0x3c)
+#define SQ_ADDRMAX              (P4SEG_STORE_QUE + 0x04000000)
+
+struct sq_mapping {
+	const char *name;
+
+	unsigned long sq_addr;
+	unsigned long addr;
+	unsigned int size;
+
+	struct list_head list;
+};
+
+/* arch/sh/kernel/cpu/sh4/sq.c */
+extern struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name);
+extern void sq_unmap(struct sq_mapping *map);
+
+extern void sq_clear(unsigned long addr, unsigned int len);
+extern void sq_flush(void *addr);
+extern void sq_flush_range(unsigned long start, unsigned int len);
+
+#endif /* __ASM_CPU_SH4_SQ_H */
+
diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h
new file mode 100644
index 000000000000..8a4af126c890
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/timer.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm-sh/cpu-sh4/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc. 
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_TIMER_H
+#define __ASM_CPU_SH4_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH4 processors
+ *	SH7750S/SH7750R
+ *	SH7751/SH7751R
+ *	SH7760
+ * ---------------------------------------------------------------------------
+ */
+
+#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
+#define TMU_TOCR        0xffd80000      /* Byte access */
+#endif
+#define TMU_TSTR        0xffd80004      /* Byte access */
+
+#define TMU0_TCOR       0xffd80008      /* Long access */
+#define TMU0_TCNT       0xffd8000c      /* Long access */
+#define TMU0_TCR        0xffd80010      /* Word access */
+
+#define TMU1_TCOR       0xffd80014      /* Long access */
+#define TMU1_TCNT       0xffd80018      /* Long access */
+#define TMU1_TCR        0xffd8001c      /* Word access */
+
+#define TMU2_TCOR       0xffd80020      /* Long access */
+#define TMU2_TCNT       0xffd80024      /* Long access */
+#define TMU2_TCR        0xffd80028      /* Word access */
+#define TMU2_TCPR	0xffd8002c	/* Long access */
+
+#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
+#define TMU3_TCOR       0xfe100008      /* Long access */
+#define TMU3_TCNT       0xfe10000c      /* Long access */
+#define TMU3_TCR        0xfe100010      /* Word access */
+
+#define TMU4_TCOR       0xfe100014      /* Long access */
+#define TMU4_TCNT       0xfe100018      /* Long access */
+#define TMU4_TCR        0xfe10001c      /* Word access */
+#endif
+
+#endif /* __ASM_CPU_SH4_TIMER_H */
+
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/include/asm-sh/cpu-sh4/ubc.h
new file mode 100644
index 000000000000..3d0943167659
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/ubc.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/cpu-sh4/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_UBC_H
+#define __ASM_CPU_SH4_UBC_H
+
+#define UBC_BARA		0xff200000
+#define UBC_BAMRA		0xff200004
+#define UBC_BBRA		0xff200008
+#define UBC_BASRA		0xff000014
+#define UBC_BARB		0xff20000c
+#define UBC_BAMRB		0xff200010
+#define UBC_BBRB		0xff200014
+#define UBC_BASRB		0xff000018
+#define UBC_BDRB		0xff200018
+#define UBC_BDMRB		0xff20001c
+#define UBC_BRCR		0xff200020
+
+#endif /* __ASM_CPU_SH4_UBC_H */
+
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/include/asm-sh/cpu-sh4/watchdog.h
new file mode 100644
index 000000000000..259f6a0ce23d
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh4/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_WATCHDOG_H
+#define __ASM_CPU_SH4_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffc00008
+#define WTCSR		0xffc0000c
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH4_WATCHDOG_H */
+
diff --git a/include/asm-sh/cputime.h b/include/asm-sh/cputime.h
new file mode 100644
index 000000000000..6ca395d1393e
--- /dev/null
+++ b/include/asm-sh/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SH_CPUTIME_H
+#define __SH_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SH_CPUTIME_H */
diff --git a/include/asm-sh/cqreek/cqreek.h b/include/asm-sh/cqreek/cqreek.h
new file mode 100644
index 000000000000..09aecc06693e
--- /dev/null
+++ b/include/asm-sh/cqreek/cqreek.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_CQREEK_CQREEK_H
+#define __ASM_SH_CQREEK_CQREEK_H
+
+#define BRIDGE_FEATURE		0x0002
+
+#define BRIDGE_IDE_CTRL		0x0018
+#define BRIDGE_IDE_INTR_LVL    	0x001A
+#define BRIDGE_IDE_INTR_MASK	0x001C
+#define BRIDGE_IDE_INTR_STAT	0x001E
+
+#define BRIDGE_ISA_CTRL		0x0028
+#define BRIDGE_ISA_INTR_LVL    	0x002A
+#define BRIDGE_ISA_INTR_MASK	0x002C
+#define BRIDGE_ISA_INTR_STAT	0x002E
+
+/* arch/sh/boards/cqreek/setup.c */
+extern void setup_cqreek(void);
+
+/* arch/sh/boards/cqreek/irq.c */
+extern int cqreek_has_ide, cqreek_has_isa;
+extern void init_cqreek_IRQ(void);
+
+/* arch/sh/boards/cqreek/io.c */
+extern unsigned long cqreek_port2addr(unsigned long port);
+
+#endif /* __ASM_SH_CQREEK_CQREEK_H */
+
diff --git a/include/asm-sh/current.h b/include/asm-sh/current.h
new file mode 100644
index 000000000000..62b63880b333
--- /dev/null
+++ b/include/asm-sh/current.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SH_CURRENT_H
+#define __ASM_SH_CURRENT_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_SH_CURRENT_H */
diff --git a/include/asm-sh/delay.h b/include/asm-sh/delay.h
new file mode 100644
index 000000000000..db599b2a5a9c
--- /dev/null
+++ b/include/asm-sh/delay.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_DELAY_H
+#define __ASM_SH_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/sh/lib/delay.c
+ */
+ 
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* __ASM_SH_DELAY_H */
diff --git a/include/asm-sh/div64.h b/include/asm-sh/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-sh/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
new file mode 100644
index 000000000000..80d164c1529e
--- /dev/null
+++ b/include/asm-sh/dma-mapping.h
@@ -0,0 +1,179 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+extern struct bus_type pci_bus_type;
+
+/* arch/sh/mm/consistent.c */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, int flag)
+{
+	if (sh_mv.mv_consistent_alloc) {
+		void *ret;
+
+		ret = sh_mv.mv_consistent_alloc(dev, size, dma_handle, flag);
+		if (ret != NULL)
+			return ret;
+	}
+
+	return consistent_alloc(flag, size, dma_handle);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle)
+{
+	if (sh_mv.mv_consistent_free) {
+		int ret;
+
+		ret = sh_mv.mv_consistent_free(dev, size, vaddr, dma_handle);
+		if (ret == 0)
+			return;
+	}
+
+	consistent_free(vaddr, size);
+}
+
+static inline void dma_cache_sync(void *vaddr, size_t size,
+				  enum dma_data_direction dir)
+{
+	consistent_sync(vaddr, size, (int)dir);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+					void *ptr, size_t size,
+					enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return virt_to_bus(ptr);
+#endif
+	dma_cache_sync(ptr, size, dir);
+
+	return virt_to_bus(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+			       sg[i].length, dir);
+#endif
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+
+	return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size, enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(bus_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+					 dma_addr_t dma_handle,
+					 unsigned long offset, size_t size,
+					 enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+			       sg[i].length, dir);
+#endif
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_single")));
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_single")));
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_sg")));
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_sg")));
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
+
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
new file mode 100644
index 000000000000..8e9436093ca8
--- /dev/null
+++ b/include/asm-sh/dma.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sysdev.h>
+#include <asm/cpu/dma.h>
+#include <asm/semaphore.h>
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
+   occurrence should be flagged as an error.  */
+/* But... */
+/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
+
+#ifdef CONFIG_NR_DMA_CHANNELS
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#else
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#endif
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ		0x00
+#define DMA_MODE_WRITE		0x01
+#define DMA_MODE_MASK		0x01
+
+#define DMA_AUTOINIT		0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+	DMAC_CHANNELS_CONFIGURED	= 0x00,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x01,
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+	DMA_CONFIGURED			= 0x00,
+	DMA_TEI_CAPABLE			= 0x01,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+	int (*request)(struct dma_channel *chan);
+	void (*free)(struct dma_channel *chan);
+
+	int (*get_residue)(struct dma_channel *chan);
+	int (*xfer)(struct dma_channel *chan);
+	void (*configure)(struct dma_channel *chan, unsigned long flags);
+};
+
+struct dma_channel {
+	char dev_id[16];
+
+	unsigned int chan;
+	unsigned int mode;
+	unsigned int count;
+
+	unsigned long sar;
+	unsigned long dar;
+
+	unsigned long flags;
+	atomic_t busy;
+
+	struct semaphore sem;
+	wait_queue_head_t wait_queue;
+
+	struct sys_device dev;
+};
+
+struct dma_info {
+	const char *name;
+	unsigned int nr_channels;
+	unsigned long flags;
+
+	struct dma_ops *ops;
+	struct dma_channel *channels;
+
+	struct list_head list;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+		    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)	\
+	dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)	\
+	dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma(unsigned int chan, const char *dev_id);
+extern void free_dma(unsigned int chan);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+
+#ifdef CONFIG_SYSFS
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *);
+#endif
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dmida/io.h b/include/asm-sh/dmida/io.h
new file mode 100644
index 000000000000..21bd416c01c3
--- /dev/null
+++ b/include/asm-sh/dmida/io.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_DMIDA_IO_H
+#define __ASM_SH_DMIDA_IO_H
+
+/*
+ * Nothing special here.. just use the generic cchip io routines.
+ */
+#include <asm/hd64465/io.h>
+
+#endif /* __ASM_SH_DMIDA_IO_H */
+
diff --git a/include/asm-sh/dreamcast/dma.h b/include/asm-sh/dreamcast/dma.h
new file mode 100644
index 000000000000..ddd68e788705
--- /dev/null
+++ b/include/asm-sh/dreamcast/dma.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-sh/dreamcast/dma.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_DMA_H
+#define __ASM_SH_DREAMCAST_DMA_H
+
+/* Number of DMA channels */
+#define ONCHIP_NR_DMA_CHANNELS	4
+#define G2_NR_DMA_CHANNELS	4
+#define PVR2_NR_DMA_CHANNELS	1
+
+/* Channels for cascading */
+#define PVR2_CASCADE_CHAN	2
+#define G2_CASCADE_CHAN		3
+
+/* PVR2 DMA Registers */
+#define PVR2_DMA_BASE		0xa05f6800
+#define PVR2_DMA_ADDR		(PVR2_DMA_BASE + 0)
+#define PVR2_DMA_COUNT		(PVR2_DMA_BASE + 4)
+#define PVR2_DMA_MODE		(PVR2_DMA_BASE + 8)
+#define PVR2_DMA_LMMODE0	(PVR2_DMA_BASE + 132)
+#define PVR2_DMA_LMMODE1	(PVR2_DMA_BASE + 136)
+
+/* G2 DMA Register */
+#define G2_DMA_BASE		0xa05f7800
+
+#endif /* __ASM_SH_DREAMCAST_DMA_H */
+
diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h
new file mode 100644
index 000000000000..e401b24b0d8e
--- /dev/null
+++ b/include/asm-sh/dreamcast/pci.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <asm/mach/sysasic.h>
+
+#define	GAPSPCI_REGS		0x01001400
+#define GAPSPCI_DMA_BASE	0x01840000
+#define GAPSPCI_DMA_SIZE	32768
+#define GAPSPCI_BBA_CONFIG	0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
+
+#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h
new file mode 100644
index 000000000000..c8858537803c
--- /dev/null
+++ b/include/asm-sh/dreamcast/sysasic.h
@@ -0,0 +1,43 @@
+/* include/asm-sh/dc_sysasic.h
+ *
+ * Definitions for the Dreamcast System ASIC and related peripherals.
+ *
+ * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
+#define __ASM_SH_DREAMCAST_SYSASIC_H
+
+#include <asm/irq.h>
+
+/* Hardware events -
+
+   Each of these events correspond to a bit within the Event Mask Registers/
+   Event Status Registers.  Because of the virtual IRQ numbering scheme, a
+   base offset must be used when calculating the virtual IRQ that each event
+   takes.
+*/
+
+#define HW_EVENT_IRQ_BASE  OFFCHIP_IRQ_BASE /* 48 */
+
+/* IRQ 13 */
+#define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
+#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
+#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
+#define HW_EVENT_G2_DMA    (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
+#define HW_EVENT_PVR2_DMA  (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
+
+/* IRQ 11 */
+#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
+#define HW_EVENT_AICA_SYS  (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
+#define HW_EVENT_EXTERNAL  (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
+
+#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
+
+#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
+
diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h
new file mode 100644
index 000000000000..639cfa489c8f
--- /dev/null
+++ b/include/asm-sh/ec3104/ec3104.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_EC3104_H
+#define __ASM_EC3104_H
+
+
+/*
+ * Most of the register set is at 0xb0ec0000 - 0xb0ecffff.
+ *
+ * as far as I've figured it out the register map is:
+ * 0xb0ec0000 - id string
+ * 0xb0ec0XXX - power management
+ * 0xb0ec1XXX - interrupt control
+ * 0xb0ec3XXX - ps2 port (touch pad on aero 8000)
+ * 0xb0ec6XXX - i2c
+ * 0xb0ec7000 - first serial port (proprietary connector on aero 8000)
+ * 0xb0ec8000 - second serial port
+ * 0xb0ec9000 - third serial port
+ * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000)
+ * 0xb0eccXXX - GPIO
+ * 0xb0ecdXXX - GPIO
+ */
+
+#define EC3104_BASE	0xb0ec0000
+
+#define EC3104_SER4_DATA	(EC3104_BASE+0xa000)
+#define EC3104_SER4_IIR		(EC3104_BASE+0xa008)
+#define EC3104_SER4_MCR		(EC3104_BASE+0xa010)
+#define EC3104_SER4_LSR		(EC3104_BASE+0xa014)
+#define EC3104_SER4_MSR		(EC3104_BASE+0xa018)
+
+/*
+ * our ISA bus.  this seems to be real ISA.
+ */
+#define EC3104_ISA_BASE	0xa5000000
+
+#define EC3104_IRQ	11
+#define EC3104_IRQBASE	64
+
+#define EC3104_IRQ_SER1	EC3104_IRQBASE + 7
+#define EC3104_IRQ_SER2	EC3104_IRQBASE + 8
+#define EC3104_IRQ_SER3	EC3104_IRQBASE + 9
+#define EC3104_IRQ_SER4	EC3104_IRQBASE + 10
+
+#endif /* __ASM_EC3104_H */
diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h
new file mode 100644
index 000000000000..ea5c8e65ac11
--- /dev/null
+++ b/include/asm-sh/ec3104/io.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_SH_IO_EC3104_H
+#define _ASM_SH_IO_EC3104_H
+
+#include <linux/types.h>
+
+extern unsigned char ec3104_inb(unsigned long port);
+extern unsigned short ec3104_inw(unsigned long port);
+extern unsigned long ec3104_inl(unsigned long port);
+
+extern void ec3104_outb(unsigned char value, unsigned long port);
+extern void ec3104_outw(unsigned short value, unsigned long port);
+extern void ec3104_outl(unsigned long value, unsigned long port);
+
+extern int ec3104_irq_demux(int irq);
+
+#endif /* _ASM_SH_IO_EC3104_H */
diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h
new file mode 100644
index 000000000000..0dee7b05b49d
--- /dev/null
+++ b/include/asm-sh/ec3104/keyboard.h
@@ -0,0 +1,17 @@
+extern unsigned char ec3104_kbd_sysrq_xlate[];
+extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int ec3104_kbd_getkeycode(unsigned int scancode);
+extern int ec3104_kbd_translate(unsigned char, unsigned char *, char);
+extern char ec3104_kbd_unexpected_up(unsigned char);
+extern void ec3104_kbd_leds(unsigned char);
+extern void ec3104_kbd_init_hw(void);
+
+#define SYSRQ_KEY 0x54
+
+#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate
+#define kbd_setkeycode ec3104_kbd_setkeycode
+#define kbd_getkeycode ec3104_kbd_getkeycode
+#define kbd_translate ec3104_kbd_translate
+#define kbd_unexpected_up ec3104_kbd_unexpected_up
+#define kbd_leds ec3104_kbd_leds
+#define kbd_init_hw ec3104_kbd_init_hw
diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h
new file mode 100644
index 000000000000..f8eb16312ed9
--- /dev/null
+++ b/include/asm-sh/ec3104/serial.h
@@ -0,0 +1,22 @@
+#include <asm/ec3104.h>
+/* Naturally we don't know the exact value but 115200 baud has a divisor
+ * of 9 and 19200 baud has a divisor of 52, so this seems like a good
+ * guess.  */
+#define BASE_BAUD (16800000 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/* there is a fourth serial port with the expected values as well, but
+ * it's got the keyboard controller behind it so we can't really use it
+ * (without moving the keyboard driver to userspace, which doesn't sound
+ * like a very good idea) */
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+/* XXX: This should be moved ino irq.h */
+#define irq_cannonicalize(x) (x)
diff --git a/include/asm-sh/edosk7705/io.h b/include/asm-sh/edosk7705/io.h
new file mode 100644
index 000000000000..a1089a65bc36
--- /dev/null
+++ b/include/asm-sh/edosk7705/io.h
@@ -0,0 +1,30 @@
+/*
+ * include/asm-sh/edosk7705/io.h
+ *
+ * Modified version of io_se.h for the EDOSK7705 specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi EDOSK7705 development board
+ */
+
+#ifndef __ASM_SH_EDOSK7705_IO_H
+#define __ASM_SH_EDOSK7705_IO_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char sh_edosk7705_inb(unsigned long port);
+extern unsigned int sh_edosk7705_inl(unsigned long port);
+
+extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
+extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
+
+extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
new file mode 100644
index 000000000000..8fe00a1981ce
--- /dev/null
+++ b/include/asm-sh/elf.h
@@ -0,0 +1,121 @@
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+/* SH relocation types  */
+#define	R_SH_NONE		0
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_DIR8WPN		3
+#define	R_SH_IND12W		4
+#define	R_SH_DIR8WPL		5
+#define	R_SH_DIR8WPZ		6
+#define	R_SH_DIR8BP		7
+#define	R_SH_DIR8W		8
+#define	R_SH_DIR8L		9
+#define	R_SH_SWITCH16		25
+#define	R_SH_SWITCH32		26
+#define	R_SH_USES		27
+#define	R_SH_COUNT		28
+#define	R_SH_ALIGN		29
+#define	R_SH_CODE		30
+#define	R_SH_DATA		31
+#define	R_SH_LABEL		32
+#define	R_SH_SWITCH8		33
+#define	R_SH_GNU_VTINHERIT	34
+#define	R_SH_GNU_VTENTRY	35
+#define	R_SH_TLS_GD_32		144
+#define	R_SH_TLS_LD_32		145
+#define	R_SH_TLS_LDO_32		146
+#define	R_SH_TLS_IE_32		147
+#define	R_SH_TLS_LE_32		148
+#define	R_SH_TLS_DTPMOD32	149
+#define	R_SH_TLS_DTPOFF32	150
+#define	R_SH_TLS_TPOFF32	151
+#define	R_SH_GOT32		160
+#define	R_SH_PLT32		161
+#define	R_SH_COPY		162
+#define	R_SH_GLOB_DAT		163
+#define	R_SH_JMP_SLOT		164
+#define	R_SH_RELATIVE		165
+#define	R_SH_GOTOFF		166
+#define	R_SH_GOTPC		167
+/* Keep this the last entry.  */
+#define	R_SH_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( (x)->e_machine == EM_SH )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+#endif
+
+#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h
new file mode 100644
index 000000000000..51cf6f9cebb8
--- /dev/null
+++ b/include/asm-sh/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_ERRNO_H
+#define __ASM_SH_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_SH_ERRNO_H */
diff --git a/include/asm-sh/fcntl.h b/include/asm-sh/fcntl.h
new file mode 100644
index 000000000000..0b3ae524e34c
--- /dev/null
+++ b/include/asm-sh/fcntl.h
@@ -0,0 +1,88 @@
+#ifndef __ASM_SH_FCNTL_H
+#define __ASM_SH_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* __ASM_SH_FCNTL_H */
+
diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h
new file mode 100644
index 000000000000..509224bdba28
--- /dev/null
+++ b/include/asm-sh/fixmap.h
@@ -0,0 +1,111 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h
new file mode 100644
index 000000000000..f29072e1c87e
--- /dev/null
+++ b/include/asm-sh/flat.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-sh/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_FLAT_H
+#define __ASM_SH_FLAT_H
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+
+#endif /* __ASM_SH_FLAT_H */
diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h
new file mode 100644
index 000000000000..f030ca08052b
--- /dev/null
+++ b/include/asm-sh/floppy.h
@@ -0,0 +1,274 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *   include/asm-i386/floppy.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_SH_FLOPPY_H
+#define __ASM_SH_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if(!doing_pdma) {
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr;
+
+		st = 1;
+		for(lcount=virtual_dma_count, lptr=virtual_dma_addr; 
+		    lcount; lcount--, lptr++) {
+			st=inb(virtual_dma_port+4) & 0xa0 ;
+			if(st != 0xa0) 
+				break;
+			if(virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port+5);
+			else
+				*lptr = inb_p(virtual_dma_port+5);
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port+4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if(st == 0x20)
+		return;
+	if(!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+#ifdef TRACE_FLPY_INT
+	if(!virtual_dma_count)
+		dma_wait++;
+#endif
+}
+
+static void fd_disable_dma(void)
+{
+	if(! (can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if(can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+						   SA_INTERRUPT|SA_SAMPLE_RANDOM,
+						   "floppy", NULL);	
+
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL,get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if((unsigned int) addr >= (unsigned int) high_memory)
+		return vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));		
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if(can_use_virtual_dma == 2) {
+		if((unsigned int) addr >= (unsigned int) high_memory ||
+		   virt_to_bus(addr) >= 0x10000000)
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+
+	dma_cache_wback_inv(addr, size);
+
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char * device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc) (unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user.		Paul G.
+ */
+#define FLOPPY0_TYPE	(4)
+#define FLOPPY1_TYPE	(0)
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define AUTO_DMA
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_SH_FLOPPY_H */
diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h
new file mode 100644
index 000000000000..2c0fde46a0ed
--- /dev/null
+++ b/include/asm-sh/freq.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/freq.h>
+
+/* arch/sh/kernel/time.c */
+extern void get_current_frequency_divisors(unsigned int *ifc, unsigned int *pfc, unsigned int *bfc);
+
+extern unsigned int get_ifc_divisor(unsigned int value);
+extern unsigned int get_ifc_divisor(unsigned int value);
+extern unsigned int get_ifc_divisor(unsigned int value);
+
+extern unsigned int get_ifc_value(unsigned int divisor);
+extern unsigned int get_pfc_value(unsigned int divisor);
+extern unsigned int get_bfc_value(unsigned int divisor);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/hardirq.h b/include/asm-sh/hardirq.h
new file mode 100644
index 000000000000..f2fdf0f760e5
--- /dev/null
+++ b/include/asm-sh/hardirq.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_HARDIRQ_H
+#define __ASM_SH_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/include/asm-sh/harp/harp.h b/include/asm-sh/harp/harp.h
new file mode 100644
index 000000000000..b2fbcfae9940
--- /dev/null
+++ b/include/asm-sh/harp/harp.h
@@ -0,0 +1,43 @@
+/* 
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.                            
+ *
+ * Defintions applicable to the STMicroelectronics ST40STB1 HARP and
+ * compatible boards.
+ */
+
+#if defined(CONFIG_SH_STB1_HARP)
+
+#define EPLD_BASE     0xa0800000
+
+#define EPLD_LED      (EPLD_BASE+0x000c0000)
+#define EPLD_INTSTAT0 (EPLD_BASE+0x00200000)
+#define EPLD_INTSTAT1 (EPLD_BASE+0x00240000)
+#define EPLD_INTMASK0 (EPLD_BASE+0x00280000)
+#define EPLD_INTMASK1 (EPLD_BASE+0x002c0000)
+#define EPLD_PAGEADDR (EPLD_BASE+0x00300000)
+#define EPLD_REVID1   (EPLD_BASE+0x00380000)
+#define EPLD_REVID2   (EPLD_BASE+0x003c0000)
+
+#define EPLD_LED_ON  1
+#define EPLD_LED_OFF 0
+
+#elif defined(CONFIG_SH_STB1_OVERDRIVE)
+
+#define EPLD_BASE     0xa7000000
+
+#define EPLD_REVID    (EPLD_BASE+0x00000000)
+#define EPLD_LED      (EPLD_BASE+0x00040000)
+#define EPLD_INTMASK0 (EPLD_BASE+0x001c0000)
+#define EPLD_INTMASK1 (EPLD_BASE+0x00200000)
+#define EPLD_INTSTAT0 (EPLD_BASE+0x00240000)
+#define EPLD_INTSTAT1 (EPLD_BASE+0x00280000)
+
+#define EPLD_LED_ON  0
+#define EPLD_LED_OFF 1
+
+#else
+#error Unknown board
+#endif
diff --git a/include/asm-sh/harp/io.h b/include/asm-sh/harp/io.h
new file mode 100644
index 000000000000..68f39e0b39de
--- /dev/null
+++ b/include/asm-sh/harp/io.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_HARP_IO_H
+#define __ASM_SH_HARP_IO_H
+
+/*
+ * Nothing special here.. just use the generic cchip io routines.
+ */
+#include <asm/hd64465/io.h>
+
+#endif /* __ASM_SH_HARP_IO_H */
+
diff --git a/include/asm-sh/hd64461/hd64461.h b/include/asm-sh/hd64461/hd64461.h
new file mode 100644
index 000000000000..c457ca277a42
--- /dev/null
+++ b/include/asm-sh/hd64461/hd64461.h
@@ -0,0 +1,203 @@
+#ifndef __ASM_SH_HD64461
+#define __ASM_SH_HD64461
+/*
+ *	$Id: hd64461.h,v 1.5 2004/03/16 00:07:51 lethal Exp $
+ *	Copyright (C) 2000 YAEGASHI Takeshi
+ *	Hitachi HD64461 companion chip support
+ */
+#include <linux/config.h>
+
+/* Constants for PCMCIA mappings */
+#define HD64461_PCC_WINDOW	0x01000000
+
+#define HD64461_PCC0_BASE	0xb8000000	/* area 6 */
+#define HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)
+#define HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)
+#define HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)
+
+#define HD64461_PCC1_BASE	0xb4000000	/* area 5 */
+#define HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)
+#define HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)
+
+#define HD64461_STBCR	0x10000
+#define HD64461_STBCR_CKIO_STBY			0x2000
+#define HD64461_STBCR_SAFECKE_IST		0x1000
+#define HD64461_STBCR_SLCKE_IST			0x0800
+#define HD64461_STBCR_SAFECKE_OST		0x0400
+#define HD64461_STBCR_SLCKE_OST			0x0200
+#define HD64461_STBCR_SMIAST			0x0100
+#define HD64461_STBCR_SLCDST			0x0080
+#define HD64461_STBCR_SPC0ST			0x0040
+#define HD64461_STBCR_SPC1ST			0x0020
+#define HD64461_STBCR_SAFEST			0x0010
+#define HD64461_STBCR_STM0ST			0x0008
+#define HD64461_STBCR_STM1ST			0x0004
+#define HD64461_STBCR_SIRST				0x0002
+#define HD64461_STBCR_SURTST			0x0001
+
+#define HD64461_SYSCR	0x10002
+#define HD64461_SCPUCR	0x10004
+
+#define HD64461_LCDCBAR		0x11000
+#define HD64461_LCDCLOR		0x11002
+#define HD64461_LCDCCR		0x11004
+#define HD64461_LCDCCR_MOFF	0x80
+
+#define	HD64461_LDR1		0x11010
+#define	HD64461_LDR1_DON	0x01
+#define	HD64461_LDR1_DINV	0x80
+
+#define	HD64461_LDR2		0x11012
+#define	HD64461_LDHNCR		0x11014
+#define	HD64461_LDHNSR		0x11016
+#define HD64461_LDVNTR		0x11018
+#define HD64461_LDVNDR		0x1101a
+#define HD64461_LDVSPR		0x1101c
+#define HD64461_LDR3		0x1101e
+
+#define HD64461_CPTWAR		0x11030	
+#define HD64461_CPTWDR		0x11032
+#define HD64461_CPTRAR		0x11034	
+#define HD64461_CPTRDR		0x11036
+
+#define HD64461_GRDOR		0x11040
+#define HD64461_GRSCR		0x11042
+#define HD64461_GRCFGR		0x11044
+#define HD64461_GRCFGR_ACCSTATUS		0x10
+#define HD64461_GRCFGR_ACCRESET			0x08
+#define HD64461_GRCFGR_ACCSTART_BITBLT	0x06
+#define HD64461_GRCFGR_ACCSTART_LINE	0x04
+#define HD64461_GRCFGR_COLORDEPTH16		0x01
+
+#define HD64461_LNSARH		0x11046
+#define HD64461_LNSARL		0x11048
+#define HD64461_LNAXLR		0x1104a
+#define HD64461_LNDGR		0x1104c
+#define HD64461_LNAXR		0x1104e
+#define HD64461_LNERTR		0x11050
+#define HD64461_LNMDR		0x11052
+#define HD64461_BBTSSARH	0x11054
+#define HD64461_BBTSSARL	0x11056
+#define HD64461_BBTDSARH	0x11058
+#define HD64461_BBTDSARL	0x1105a
+#define HD64461_BBTDWR		0x1105c
+#define HD64461_BBTDHR		0x1105e
+#define HD64461_BBTPARH		0x11060
+#define HD64461_BBTPARL		0x11062
+#define HD64461_BBTMARH		0x11064
+#define HD64461_BBTMARL		0x11066
+#define HD64461_BBTROPR		0x11068
+#define HD64461_BBTMDR		0x1106a
+
+/* PC Card Controller Registers */
+#define HD64461_PCC0ISR         0x12000 /* socket 0 interface status */
+#define HD64461_PCC0GCR         0x12002 /* socket 0 general control */
+#define HD64461_PCC0CSCR        0x12004 /* socket 0 card status change */
+#define HD64461_PCC0CSCIER      0x12006 /* socket 0 card status change interrupt enable */
+#define HD64461_PCC0SCR         0x12008 /* socket 0 software control */
+#define HD64461_PCC1ISR         0x12010 /* socket 1 interface status */
+#define HD64461_PCC1GCR         0x12012 /* socket 1 general control */
+#define HD64461_PCC1CSCR        0x12014 /* socket 1 card status change */
+#define HD64461_PCC1CSCIER      0x12016 /* socket 1 card status change interrupt enable */
+#define HD64461_PCC1SCR         0x12018 /* socket 1 software control */
+
+/* PCC Interface Status Register */
+#define HD64461_PCCISR_READY		0x80	/* card ready */
+#define HD64461_PCCISR_MWP		0x40	/* card write-protected */
+#define HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
+#define HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
+#define HD64461_PCCISR_CD2		0x08	/* card detect 2 */
+#define HD64461_PCCISR_CD1		0x04	/* card detect 1 */
+#define HD64461_PCCISR_BVD2		0x02	/* battery 1 */
+#define HD64461_PCCISR_BVD1		0x01	/* battery 1 */
+
+#define HD64461_PCCISR_PCD_MASK		0x0c    /* card detect */
+#define HD64461_PCCISR_BVD_MASK	0x03    /* battery voltage */
+#define HD64461_PCCISR_BVD_BATGOOD	0x03    /* battery good */
+#define HD64461_PCCISR_BVD_BATWARN	0x01    /* battery low warning */
+#define HD64461_PCCISR_BVD_BATDEAD1	0x02    /* battery dead */
+#define HD64461_PCCISR_BVD_BATDEAD2	0x00    /* battery dead */
+
+/* PCC General Control Register */
+#define HD64461_PCCGCR_DRVE		0x80    /* output drive */
+#define HD64461_PCCGCR_PCCR		0x40    /* PC card reset */
+#define HD64461_PCCGCR_PCCT		0x20    /* PC card type, 1=IO&mem, 0=mem */
+#define HD64461_PCCGCR_VCC0		0x10    /* voltage control pin VCC0SEL0 */
+#define HD64461_PCCGCR_PMMOD		0x08    /* memory mode */
+#define HD64461_PCCGCR_PA25		0x04    /* pin A25 */
+#define HD64461_PCCGCR_PA24		0x02    /* pin A24 */
+#define HD64461_PCCGCR_REG		0x01    /* pin PCC0REG# */
+
+/* PCC Card Status Change Register */
+#define HD64461_PCCCSCR_SCDI		0x80    /* sw card detect intr */
+#define HD64461_PCCCSCR_SRV1		0x40    /* reserved */
+#define HD64461_PCCCSCR_IREQ		0x20    /* IREQ intr req */
+#define HD64461_PCCCSCR_SC		0x10    /* STSCHG (status change) pin */
+#define HD64461_PCCCSCR_CDC		0x08    /* CD (card detect) change */
+#define HD64461_PCCCSCR_RC		0x04    /* READY change */
+#define HD64461_PCCCSCR_BW		0x02    /* battery warning change */
+#define HD64461_PCCCSCR_BD		0x01    /* battery dead change */
+
+/* PCC Card Status Change Interrupt Enable Register */
+#define HD64461_PCCCSCIER_CRE		0x80    /* change reset enable */
+#define HD64461_PCCCSCIER_IREQE_MASK   	0x60   /* IREQ enable */
+#define HD64461_PCCCSCIER_IREQE_DISABLED	0x00   /* IREQ disabled */
+#define HD64461_PCCCSCIER_IREQE_LEVEL  	0x20   /* IREQ level-triggered */
+#define HD64461_PCCCSCIER_IREQE_FALLING	0x40   /* IREQ falling-edge-trig */
+#define HD64461_PCCCSCIER_IREQE_RISING 	0x60   /* IREQ rising-edge-trig */
+
+#define HD64461_PCCCSCIER_SCE		0x10    /* status change enable */
+#define HD64461_PCCCSCIER_CDE		0x08    /* card detect change enable */
+#define HD64461_PCCCSCIER_RE		0x04    /* ready change enable */
+#define HD64461_PCCCSCIER_BWE		0x02    /* battery warn change enable */
+#define HD64461_PCCCSCIER_BDE		0x01    /* battery dead change enable*/
+
+/* PCC Software Control Register */
+#define HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
+#define HD64461_PCCSCR_SWP		0x01    /* write protect */
+
+
+#define HD64461_P0OCR           0x1202a
+#define HD64461_P1OCR           0x1202c
+#define HD64461_PGCR            0x1202e
+
+#define HD64461_GPACR		0x14000
+#define HD64461_GPBCR		0x14002
+#define HD64461_GPCCR		0x14004
+#define HD64461_GPDCR		0x14006
+#define HD64461_GPADR		0x14010
+#define HD64461_GPBDR		0x14012
+#define HD64461_GPCDR		0x14014
+#define HD64461_GPDDR		0x14016
+#define HD64461_GPAICR		0x14020
+#define HD64461_GPBICR		0x14022
+#define HD64461_GPCICR		0x14024
+#define HD64461_GPDICR		0x14026
+#define HD64461_GPAISR		0x14040
+#define HD64461_GPBISR		0x14042
+#define HD64461_GPCISR		0x14044
+#define HD64461_GPDISR		0x14046
+
+#define HD64461_NIRR		0x15000
+#define HD64461_NIMR		0x15002
+
+#ifndef CONFIG_HD64461_IOBASE
+#define CONFIG_HD64461_IOBASE	0xb0000000
+#endif
+#ifndef CONFIG_HD64461_IRQ
+#define CONFIG_HD64461_IRQ	36
+#endif
+
+#define HD64461_IRQBASE		OFFCHIP_IRQ_BASE
+#define HD64461_IRQ_NUM 	16
+
+#define HD64461_IRQ_UART    	(HD64461_IRQBASE+5)
+#define HD64461_IRQ_IRDA    	(HD64461_IRQBASE+6)
+#define HD64461_IRQ_TMU1   	(HD64461_IRQBASE+9)
+#define HD64461_IRQ_TMU0  	(HD64461_IRQBASE+10)
+#define HD64461_IRQ_GPIO    	(HD64461_IRQBASE+11)
+#define HD64461_IRQ_AFE     	(HD64461_IRQBASE+12)
+#define HD64461_IRQ_PCC1 	(HD64461_IRQBASE+13)
+#define HD64461_IRQ_PCC0 	(HD64461_IRQBASE+14)
+
+#endif
diff --git a/include/asm-sh/hd64461/io.h b/include/asm-sh/hd64461/io.h
new file mode 100644
index 000000000000..67f2489088d9
--- /dev/null
+++ b/include/asm-sh/hd64461/io.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/io_hd64461.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an HD64461
+ */
+
+#ifndef _ASM_SH_IO_HD64461_H
+#define _ASM_SH_IO_HD64461_H
+
+extern unsigned char hd64461_inb(unsigned long port);
+extern unsigned short hd64461_inw(unsigned long port);
+extern unsigned int hd64461_inl(unsigned long port);
+
+extern void hd64461_outb(unsigned char value, unsigned long port);
+extern void hd64461_outw(unsigned short value, unsigned long port);
+extern void hd64461_outl(unsigned int value, unsigned long port);
+
+extern unsigned char hd64461_inb_p(unsigned long port);
+extern void hd64461_outb_p(unsigned char value, unsigned long port);
+
+extern void hd64461_insb(unsigned long port, void *addr, unsigned long count);
+extern void hd64461_insw(unsigned long port, void *addr, unsigned long count);
+extern void hd64461_insl(unsigned long port, void *addr, unsigned long count);
+
+extern void hd64461_outsb(unsigned long port, const void *buffer, unsigned long count);
+extern void hd64461_outsw(unsigned long port, const void *buffer, unsigned long count);
+extern void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count);
+
+extern unsigned short hd64461_readw(unsigned long addr);
+extern void hd64461_writew(unsigned short b, unsigned long addr);
+
+
+extern int hd64461_irq_demux(int irq);
+extern void hd64461_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void hd64461_unregister_irq_demux(int irq);
+
+#endif /* _ASM_SH_IO_HD64461_H */
diff --git a/include/asm-sh/hd64465/gpio.h b/include/asm-sh/hd64465/gpio.h
new file mode 100644
index 000000000000..a3cdca2713dd
--- /dev/null
+++ b/include/asm-sh/hd64465/gpio.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_SH_HD64465_GPIO_
+#define _ASM_SH_HD64465_GPIO_ 1
+/*
+ * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip: General Purpose IO pins support.
+ * This layer enables other device drivers to configure GPIO
+ * pins, get and set their values, and register an interrupt
+ * routine for when input pins change in hardware.
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ */
+#include <asm/hd64465.h>
+
+/* Macro to construct a portpin number (used in all
+ * subsequent functions) from a port letter and a pin
+ * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
+ */
+#define HD64465_GPIO_PORTPIN(port,pin)	(((port)-'A')<<3|(pin))
+
+/* Pin configuration constants for _configure() */
+#define HD64465_GPIO_FUNCTION2	0	/* use the pin's *other* function */
+#define HD64465_GPIO_OUT	1	/* output */
+#define HD64465_GPIO_IN_PULLUP	2	/* input, pull-up MOS on */
+#define HD64465_GPIO_IN		3	/* input */
+
+/* Configure a pin's direction */
+extern void hd64465_gpio_configure(int portpin, int direction);
+
+/* Get, set value */
+extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
+extern unsigned int hd64465_gpio_get_pin(int portpin);
+extern void hd64465_gpio_set_port(int port, unsigned int value);
+extern unsigned int hd64465_gpio_get_port(int port);
+
+/* mode constants for _register_irq() */
+#define HD64465_GPIO_FALLING	0
+#define HD64465_GPIO_RISING	1
+
+/* Interrupt on external value change */
+extern void hd64465_gpio_register_irq(int portpin, int mode,
+	void (*handler)(int portpin, void *dev), void *dev);
+extern void hd64465_gpio_unregister_irq(int portpin);
+
+#endif /* _ASM_SH_HD64465_GPIO_  */
diff --git a/include/asm-sh/hd64465/hd64465.h b/include/asm-sh/hd64465/hd64465.h
new file mode 100644
index 000000000000..c672032b72c9
--- /dev/null
+++ b/include/asm-sh/hd64465/hd64465.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_SH_HD64465_
+#define _ASM_SH_HD64465_ 1
+/*
+ * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip support
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from <asm/hd64461.h> which bore the message:
+ * Copyright (C) 2000 YAEGASHI Takeshi
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Note that registers are defined here as virtual port numbers,
+ * which have no meaning except to get translated by hd64465_isa_port2addr()
+ * to an address in the range 0xb0000000-0xb3ffffff.  Note that
+ * this translation happens to consist of adding the lower 16 bits
+ * of the virtual port number to 0xb0000000.  Note also that the manual
+ * shows addresses as absolute physical addresses starting at 0x10000000,
+ * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
+ * manual, and accessed using address 0xb0005000 - Greg.
+ */
+
+/* System registers */
+#define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
+#define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
+#define     HD64465_SDID            0x8122  /* 64465 device ID */
+
+/* Power Management registers */
+#define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
+#define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
+#define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
+#define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
+#define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
+#define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
+#define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
+#define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
+#define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
+#define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
+#define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
+#define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
+#define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */
+ 
+/* Interrupt Controller registers */
+#define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
+#define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
+#define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */
+
+/* Timer registers */
+#define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
+#define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
+#define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
+#define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
+#define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
+#define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
+#define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
+#define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
+#define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
+#define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
+#define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
+#define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
+#define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
+#define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
+#define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
+#define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
+#define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
+#define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
+#define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
+#define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
+#define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
+#define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */
+
+/* Analog/Digital Converter registers */
+#define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
+#define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
+#define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
+#define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
+#define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
+#define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
+#define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
+#define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
+#define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
+#define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
+#define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
+#define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
+#define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
+#define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */
+
+
+/* General Purpose I/O ports registers */
+#define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
+#define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
+#define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
+#define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
+#define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
+#define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
+#define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
+#define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
+#define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
+#define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
+#define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
+#define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
+#define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
+#define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
+#define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
+#define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
+#define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
+#define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
+#define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
+#define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */
+
+/* PCMCIA bridge interface */
+#define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */ 
+#define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
+#define     HD64465_PCCISR_PIREQ    	 0x80
+#define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
+#define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
+#define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
+#define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
+#define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
+#define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
+#define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
+#define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
+#define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
+#define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */ 
+#define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
+#define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
+#define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
+#define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
+#define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
+#define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
+#define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
+#define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
+#define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */ 
+#define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
+#define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
+#define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
+#define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
+#define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
+#define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
+#define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
+#define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
+#define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */ 
+#define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
+#define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
+#define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
+#define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
+#define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
+#define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
+#define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
+#define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
+#define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
+#define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
+#define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
+#define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */ 
+#define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
+#define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
+#define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */ 
+#define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */ 
+#define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */ 
+#define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */ 
+#define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */ 
+#define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */ 
+
+
+/* PS/2 Keyboard and mouse controller -- *not* register compatible */
+#define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
+#define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
+#define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
+#define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
+#define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
+#define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
+#define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
+#define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
+#define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
+#define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
+#define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
+#define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
+#define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
+#define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */
+
+
+/*
+ * Logical address at which the HD64465 is mapped.  Note that this
+ * should always be in the P2 segment (uncached and untranslated).
+ */
+#ifndef CONFIG_HD64465_IOBASE
+#define CONFIG_HD64465_IOBASE	0xb0000000
+#endif
+/*
+ * The HD64465 multiplexes all its modules' interrupts onto
+ * this single interrupt.
+ */
+#ifndef CONFIG_HD64465_IRQ
+#define CONFIG_HD64465_IRQ	5
+#endif
+
+
+#define _HD64465_IO_MASK	0xf8000000
+#define is_hd64465_addr(addr) \
+	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
+
+/*
+ * A range of 16 virtual interrupts generated by
+ * demuxing the HD64465 muxed interrupt.
+ */
+#define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
+#define HD64465_IRQ_NUM 	16
+#define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
+#define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
+#define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
+#define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
+/* bit 4 is reserved */
+#define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
+#define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
+#define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
+#define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
+#define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
+#define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
+#define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
+#define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
+#define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
+#define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
+#define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)
+
+/* Constants for PCMCIA mappings */
+#define HD64465_PCC_WINDOW	0x01000000
+
+#define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
+#define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
+#define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
+
+#define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
+#define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
+#define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
+
+/*
+ * Base of USB controller interface (as memory)
+ */
+#define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
+#define HD64465_USB_LEN    	0x1000
+/*
+ * Base of embedded SRAM, used for USB controller.
+ */
+#define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
+#define HD64465_SRAM_LEN    	0x1000
+
+
+
+#endif /* _ASM_SH_HD64465_  */
diff --git a/include/asm-sh/hd64465/io.h b/include/asm-sh/hd64465/io.h
new file mode 100644
index 000000000000..1100bcf4968e
--- /dev/null
+++ b/include/asm-sh/hd64465/io.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/io_hd64465.h
+ *
+ * By Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from io_hd64461.h, which bore the message:
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
+ */
+
+#ifndef _ASM_SH_IO_HD64465_H
+#define _ASM_SH_IO_HD64465_H
+
+extern unsigned char hd64465_inb(unsigned long port);
+extern unsigned short hd64465_inw(unsigned long port);
+extern unsigned int hd64465_inl(unsigned long port);
+
+extern void hd64465_outb(unsigned char value, unsigned long port);
+extern void hd64465_outw(unsigned short value, unsigned long port);
+extern void hd64465_outl(unsigned int value, unsigned long port);
+
+extern unsigned char hd64465_inb_p(unsigned long port);
+extern void hd64465_outb_p(unsigned char value, unsigned long port);
+
+extern unsigned long hd64465_isa_port2addr(unsigned long offset);
+extern int hd64465_irq_demux(int irq);
+/* Provision for generic secondary demux step -- used by PCMCIA code */
+extern void hd64465_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void hd64465_unregister_irq_demux(int irq);
+/* Set this variable to 1 to see port traffic */
+extern int hd64465_io_debug;
+/* Map a range of ports to a range of kernel virtual memory.
+ */
+extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
+			     unsigned long addr, unsigned char shift);
+extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
+
+#endif /* _ASM_SH_IO_HD64465_H */
diff --git a/include/asm-sh/hdreg.h b/include/asm-sh/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-sh/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-sh/hp6xx/hp6xx.h b/include/asm-sh/hp6xx/hp6xx.h
new file mode 100644
index 000000000000..a26247fd3d87
--- /dev/null
+++ b/include/asm-sh/hp6xx/hp6xx.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+#define HP680_TS_IRQ IRQ3_IRQ
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LED_RED	0x80
+
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/include/asm-sh/hp6xx/ide.h b/include/asm-sh/hp6xx/ide.h
new file mode 100644
index 000000000000..570395a5ebe5
--- /dev/null
+++ b/include/asm-sh/hp6xx/ide.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_HP6XX_IDE_H
+#define __ASM_SH_HP6XX_IDE_H
+
+#define IRQ_CFCARD	93
+#define IRQ_PCMCIA	94
+
+#endif /* __ASM_SH_HP6XX_IDE_H */
+
diff --git a/include/asm-sh/hp6xx/io.h b/include/asm-sh/hp6xx/io.h
new file mode 100644
index 000000000000..731798003550
--- /dev/null
+++ b/include/asm-sh/hp6xx/io.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_HP6XX_IO_H
+#define __ASM_SH_HP6XX_IO_H
+
+/*
+ * Nothing special here.. just use the generic cchip io routines.
+ */
+#include <asm/hd64461/io.h>
+
+#endif /* __ASM_SH_HP6XX_IO_H */
+
diff --git a/include/asm-sh/hs7751rvoip/hs7751rvoip.h b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
new file mode 100644
index 000000000000..5f995f937a44
--- /dev/null
+++ b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
+#define __ASM_SH_RENESAS_HS7751RVOIP_H
+
+/*
+ * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales HS7751RVoIP support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SLICCNTR1	0xa4000006	/* SLIC PIO Control 1 */
+#define PA_SLICCNTR2	0xa4000008	/* SLIC PIO Control 2 */
+#define PA_DMACNTR	0xa400000a	/* USB DMA Control */
+#define PA_INPORTR	0xa400000c	/* Input Port Register */
+#define PA_OUTPORTR	0xa400000e	/* Output Port Reguster */
+#define PA_VERREG	0xa4000014	/* FPGA Version Register */
+
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+#define IRLCNTR2	(PA_BCR + 2)	/* Interrupt Control Register2 */
+#define IRLCNTR3	(PA_BCR + 4)	/* Interrupt Control Register3 */
+#define IRLCNTR4	(PA_BCR + 16)	/* Interrupt Control Register4 */
+#define IRLCNTR5	(PA_BCR + 18)	/* Interrupt Control Register5 */
+
+#define IRQ_PCIETH	6		/* PCI Ethernet IRQ */
+#define IRQ_PCIHUB	7		/* PCI Ethernet Hub IRQ */
+#define IRQ_USBCOM	8		/* USB Comunication IRQ */
+#define IRQ_USBCON	9		/* USB Connect IRQ */
+#define IRQ_USBDMA	10		/* USB DMA IRQ */
+#define IRQ_CFCARD	11		/* CF Card IRQ */
+#define IRQ_PCMCIA	12		/* PCMCIA IRQ */
+#define IRQ_PCISLOT	13		/* PCI Slot #1 IRQ */
+#define IRQ_ONHOOK1	0		/* ON HOOK1 IRQ */
+#define IRQ_OFFHOOK1	1		/* OFF HOOK1 IRQ */
+#define IRQ_ONHOOK2	2		/* ON HOOK2 IRQ */
+#define IRQ_OFFHOOK2	3		/* OFF HOOK2 IRQ */
+#define	IRQ_RINGING	4		/* Ringing IRQ */
+#define	IRQ_CODEC	5		/* CODEC IRQ */
+
+#endif  /* __ASM_SH_RENESAS_HS7751RVOIP */
diff --git a/include/asm-sh/hs7751rvoip/ide.h b/include/asm-sh/hs7751rvoip/ide.h
new file mode 100644
index 000000000000..65ad1d0f763b
--- /dev/null
+++ b/include/asm-sh/hs7751rvoip/ide.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_HS7751RVOIP_IDE_H
+#define __ASM_SH_HS7751RVOIP_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/hs7751rvoip/hs7751rvoip.h>
+
+#endif /* __ASM_SH_HS7751RVOIP_IDE_H */
+
diff --git a/include/asm-sh/hs7751rvoip/io.h b/include/asm-sh/hs7751rvoip/io.h
new file mode 100644
index 000000000000..513c8514001b
--- /dev/null
+++ b/include/asm-sh/hs7751rvoip/io.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-sh/hs7751rvoip/hs7751rvoip.h
+ *
+ * Modified version of io_se.h for the hs7751rvoip-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Renesas Technology sales HS7751RVOIP
+ */
+
+#ifndef _ASM_SH_IO_HS7751RVOIP_H
+#define _ASM_SH_IO_HS7751RVOIP_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char hs7751rvoip_inb(unsigned long port);
+extern unsigned short hs7751rvoip_inw(unsigned long port);
+extern unsigned int hs7751rvoip_inl(unsigned long port);
+
+extern void hs7751rvoip_outb(unsigned char value, unsigned long port);
+extern void hs7751rvoip_outw(unsigned short value, unsigned long port);
+extern void hs7751rvoip_outl(unsigned int value, unsigned long port);
+
+extern unsigned char hs7751rvoip_inb_p(unsigned long port);
+extern void hs7751rvoip_outb_p(unsigned char value, unsigned long port);
+
+extern void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count);
+extern void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count);
+extern void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count);
+extern void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern void *hs7751rvoip_ioremap(unsigned long offset, unsigned long size);
+
+extern unsigned long hs7751rvoip_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_HS7751RVOIP_H */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
new file mode 100644
index 000000000000..1d934fb2c581
--- /dev/null
+++ b/include/asm-sh/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+	/* Nothing to do */
+}
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h
new file mode 100644
index 000000000000..f42cf3977a57
--- /dev/null
+++ b/include/asm-sh/ide.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/include/asm-sh/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the i386 architecture specific IDE code.
+ *  In future, SuperH code.
+ */
+
+#ifndef __ASM_SH_IDE_H
+#define __ASM_SH_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
+#endif
+
+#define ide_default_io_ctl(base)	(0)
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IDE_H */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
new file mode 100644
index 000000000000..6bc343fee7a0
--- /dev/null
+++ b/include/asm-sh/io.h
@@ -0,0 +1,311 @@
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+/*
+ * Convention:
+ *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ * These may (will) be platform specific function.
+ * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
+ * and 'string' versions: ins{b,w,l}/outs{b,w,l}
+ * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
+ * do not have a memory barrier after them.
+ *
+ * In addition, we have 
+ *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
+ *   which are processor specific.
+ */
+
+/*
+ * We follow the Alpha convention here:
+ *  __inb expands to an inline function call (which calls via the mv)
+ *  _inb  is a real function call (note ___raw fns are _ version of __raw)
+ *  inb   by default expands to _inb, but the machine specific code may
+ *        define it to __inb if it chooses.
+ */
+
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/machvec.h>
+#include <linux/config.h>
+
+/*
+ * Depending on which platform we are running on, we need different
+ * I/O functions.
+ */
+
+#ifdef __KERNEL__
+/*
+ * Since boards are able to define their own set of I/O routines through
+ * their respective machine vector, we always wrap through the mv.
+ *
+ * Also, in the event that a board hasn't provided its own definition for
+ * a given routine, it will be wrapped to generic code at run-time.
+ */
+
+# define __inb(p)	sh_mv.mv_inb((p))
+# define __inw(p)	sh_mv.mv_inw((p))
+# define __inl(p)	sh_mv.mv_inl((p))
+# define __outb(x,p)	sh_mv.mv_outb((x),(p))
+# define __outw(x,p)	sh_mv.mv_outw((x),(p))
+# define __outl(x,p)	sh_mv.mv_outl((x),(p))
+
+# define __inb_p(p)	sh_mv.mv_inb_p((p))
+# define __inw_p(p)	sh_mv.mv_inw_p((p))
+# define __inl_p(p)	sh_mv.mv_inl_p((p))
+# define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
+# define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
+# define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
+
+# define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
+# define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
+# define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
+# define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
+# define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
+# define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
+
+# define __readb(a)	sh_mv.mv_readb((a))
+# define __readw(a)	sh_mv.mv_readw((a))
+# define __readl(a)	sh_mv.mv_readl((a))
+# define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
+# define __writew(v,a)	sh_mv.mv_writew((v),(a))
+# define __writel(v,a)	sh_mv.mv_writel((v),(a))
+
+# define __ioremap(a,s)	sh_mv.mv_ioremap((a), (s))
+# define __iounmap(a)	sh_mv.mv_iounmap((a))
+
+# define __isa_port2addr(a)	sh_mv.mv_isa_port2addr(a)
+
+# define inb		__inb
+# define inw		__inw
+# define inl		__inl
+# define outb		__outb
+# define outw		__outw
+# define outl		__outl
+
+# define inb_p		__inb_p
+# define inw_p		__inw_p
+# define inl_p		__inl_p
+# define outb_p		__outb_p
+# define outw_p		__outw_p
+# define outl_p		__outl_p
+
+# define insb		__insb
+# define insw		__insw
+# define insl		__insl
+# define outsb		__outsb
+# define outsw		__outsw
+# define outsl		__outsl
+
+# define __raw_readb	__readb
+# define __raw_readw	__readw
+# define __raw_readl	__readl
+# define __raw_writeb	__writeb
+# define __raw_writew	__writew
+# define __raw_writel	__writel
+
+/*
+ * The platform header files may define some of these macros to use
+ * the inlined versions where appropriate.  These macros may also be
+ * redefined by userlevel programs.
+ */
+#ifdef __raw_readb
+# define readb(a)	({ unsigned long r_ = __raw_readb((unsigned long)a); mb(); r_; })
+#endif
+#ifdef __raw_readw
+# define readw(a)	({ unsigned long r_ = __raw_readw((unsigned long)a); mb(); r_; })
+#endif
+#ifdef __raw_readl
+# define readl(a)	({ unsigned long r_ = __raw_readl((unsigned long)a); mb(); r_; })
+#endif
+
+#ifdef __raw_writeb
+# define writeb(v,a)	({ __raw_writeb((v),(unsigned long)(a)); mb(); })
+#endif
+#ifdef __raw_writew
+# define writew(v,a)	({ __raw_writew((v),(unsigned long)(a)); mb(); })
+#endif
+#ifdef __raw_writel
+# define writel(v,a)	({ __raw_writel((v),(unsigned long)(a)); mb(); })
+#endif
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+#define mmiowb()
+
+/*
+ * If the platform has PC-like I/O, this function converts the offset into
+ * an address.
+ */
+static __inline__ unsigned long isa_port2addr(unsigned long offset)
+{
+	return __isa_port2addr(offset);
+}
+
+/*
+ * This function provides a method for the generic case where a board-specific
+ * isa_port2addr simply needs to return the port + some arbitrary port base.
+ *
+ * We use this at board setup time to implicitly set the port base, and
+ * as a result, we can use the generic isa_port2addr.
+ */
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	extern unsigned long generic_io_base;
+
+	generic_io_base = pbase;
+}
+
+#define isa_readb(a) readb(isa_port2addr(a))
+#define isa_readw(a) readw(isa_port2addr(a))
+#define isa_readl(a) readl(isa_port2addr(a))
+#define isa_writeb(b,a) writeb(b,isa_port2addr(a))
+#define isa_writew(w,a) writew(w,isa_port2addr(a))
+#define isa_writel(l,a) writel(l,isa_port2addr(a))
+#define isa_memset_io(a,b,c) \
+  memset((void *)(isa_port2addr((unsigned long)a)),(b),(c))
+#define isa_memcpy_fromio(a,b,c) \
+  memcpy((a),(void *)(isa_port2addr((unsigned long)(b))),(c))
+#define isa_memcpy_toio(a,b,c) \
+  memcpy((void *)(isa_port2addr((unsigned long)(a))),(b),(c))
+
+/* We really want to try and get these to memcpy etc */
+extern void memcpy_fromio(void *, unsigned long, unsigned long);
+extern void memcpy_toio(unsigned long, const void *, unsigned long);
+extern void memset_io(unsigned long, int, unsigned long);
+
+/* SuperH on-chip I/O functions */
+static __inline__ unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static __inline__ unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static __inline__ unsigned int ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static __inline__ void ctrl_outl(unsigned int b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are trivial on the 1:1 Linux/SuperH mapping
+ */
+static __inline__ unsigned long virt_to_phys(volatile void * address)
+{
+	return PHYSADDR(address);
+}
+
+static __inline__ void * phys_to_virt(unsigned long address)
+{
+	return (void *)P1SEGADDR(address);
+}
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#define page_to_bus page_to_phys
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ *
+ * On SH, we have the whole physical address space mapped at all times
+ * (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
+ * anything.  (This isn't true for all machines but we still handle
+ * these cases with wired TLB entries anyway ...)
+ *
+ * We cheat a bit and always return uncachable areas until we've fixed
+ * the drivers to handle caching properly.  
+ */
+static __inline__ void * ioremap(unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size);
+}
+
+static __inline__ void iounmap(void *addr)
+{
+	return __iounmap(addr);
+}
+
+#define ioremap_nocache(off,size) ioremap(off,size)
+
+static __inline__ int check_signature(unsigned long io_addr,
+			const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and RAM coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ *  - dma_cache_wback(start, size) writes back any dirty lines but does
+ *    not invalidate the cache.  This can be used before DMA reads from
+ *    memory,
+ */
+
+#define dma_cache_wback_inv(_start,_size) \
+    __flush_purge_region(_start,_size)
+#define dma_cache_inv(_start,_size) \
+    __flush_invalidate_region(_start,_size)
+#define dma_cache_wback(_start,_size) \
+    __flush_wback_region(_start,_size)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IO_H */
diff --git a/include/asm-sh/io_generic.h b/include/asm-sh/io_generic.h
new file mode 100644
index 000000000000..be14587342f7
--- /dev/null
+++ b/include/asm-sh/io_generic.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm-sh/io_generic.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Generic IO functions
+ */
+
+#ifndef _ASM_SH_IO_GENERIC_H
+#define _ASM_SH_IO_GENERIC_H
+
+extern unsigned long generic_io_base;
+
+extern unsigned char generic_inb(unsigned long port);
+extern unsigned short generic_inw(unsigned long port);
+extern unsigned int generic_inl(unsigned long port);
+
+extern void generic_outb(unsigned char value, unsigned long port);
+extern void generic_outw(unsigned short value, unsigned long port);
+extern void generic_outl(unsigned int value, unsigned long port);
+
+extern unsigned char generic_inb_p(unsigned long port);
+extern unsigned short generic_inw_p(unsigned long port);
+extern unsigned int generic_inl_p(unsigned long port);
+extern void generic_outb_p(unsigned char value, unsigned long port);
+extern void generic_outw_p(unsigned short value, unsigned long port);
+extern void generic_outl_p(unsigned int value, unsigned long port);
+
+extern void generic_insb(unsigned long port, void *addr, unsigned long count);
+extern void generic_insw(unsigned long port, void *addr, unsigned long count);
+extern void generic_insl(unsigned long port, void *addr, unsigned long count);
+extern void generic_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void generic_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void generic_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned char generic_readb(unsigned long addr);
+extern unsigned short generic_readw(unsigned long addr);
+extern unsigned int generic_readl(unsigned long addr);
+extern void generic_writeb(unsigned char b, unsigned long addr);
+extern void generic_writew(unsigned short b, unsigned long addr);
+extern void generic_writel(unsigned int b, unsigned long addr);
+
+extern void *generic_ioremap(unsigned long offset, unsigned long size);
+extern void generic_iounmap(void *addr);
+
+extern unsigned long generic_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_GENERIC_H */
diff --git a/include/asm-sh/ioctl.h b/include/asm-sh/ioctl.h
new file mode 100644
index 000000000000..524700e84acd
--- /dev/null
+++ b/include/asm-sh/ioctl.h
@@ -0,0 +1,75 @@
+/* $Id: ioctl.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef __ASM_SH_IOCTL_H
+#define __ASM_SH_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* __ASM_SH_IOCTL_H */
diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h
new file mode 100644
index 000000000000..1866f3f90028
--- /dev/null
+++ b/include/asm-sh/ioctls.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_IOCTLS_H
+#define __ASM_SH_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	_IO('T', 12) /* 0x540C */
+#define TIOCNXCL	_IO('T', 13) /* 0x540D */
+#define TIOCSCTTY	_IO('T', 14) /* 0x540E */
+
+#define TIOCSTI		_IOW('T', 18, char) /* 0x5412 */
+#define TIOCMGET	_IOR('T', 21, unsigned int) /* 0x5415 */
+#define TIOCMBIS	_IOW('T', 22, unsigned int) /* 0x5416 */
+#define TIOCMBIC	_IOW('T', 23, unsigned int) /* 0x5417 */
+#define TIOCMSET	_IOW('T', 24, unsigned int) /* 0x5418 */
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int) /* 0x5419 */
+#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int) /* 0x541A */
+#define TIOCLINUX	_IOW('T', 28, char) /* 0x541C */
+#define TIOCCONS	_IO('T', 29) /* 0x541D */
+#define TIOCGSERIAL	_IOR('T', 30, struct serial_struct) /* 0x541E */
+#define TIOCSSERIAL	_IOW('T', 31, struct serial_struct) /* 0x541F */
+#define TIOCPKT		_IOW('T', 32, int) /* 0x5420 */
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	_IO('T', 34) /* 0x5422 */
+#define TIOCSETD	_IOW('T', 35, int) /* 0x5423 */
+#define TIOCGETD	_IOR('T', 36, int) /* 0x5424 */
+#define TCSBRKP		_IOW('T', 37, int) /* 0x5425 */	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	_IO('T', 39) /* 0x5427 */ /* BSD compatibility */
+#define TIOCCBRK	_IO('T', 40) /* 0x5428 */ /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
+#define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */
+#define TIOCSERSWILD	_IOW('T', 85,  int) /* 0x5455 */
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	_IOR('T', 88, struct async_struct) /* 0x5458 */ /* For debugging only */
+#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* 0x545A */ /* Get multiport config  */
+#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* 0x545B */ /* Set multiport config */
+
+#define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	_IOR('T', 93, struct async_icount) /* 0x545D */	/* read serial port inline interrupt counts */
+
+#endif /* __ASM_SH_IOCTLS_H */
diff --git a/include/asm-sh/ipc.h b/include/asm-sh/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-sh/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-sh/ipcbuf.h b/include/asm-sh/ipcbuf.h
new file mode 100644
index 000000000000..5ffc9972a7ea
--- /dev/null
+++ b/include/asm-sh/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_SH_IPCBUF_H__
+#define __ASM_SH_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_SH_IPCBUF_H__ */
diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h
new file mode 100644
index 000000000000..bf2e4310ffac
--- /dev/null
+++ b/include/asm-sh/irq-sh73180.h
@@ -0,0 +1,350 @@
+#ifndef __ASM_SH_IRQ_SH73180_H
+#define __ASM_SH_IRQ_SH73180_H
+
+/*
+ * linux/include/asm-sh/irq-sh73180.h
+ *
+ * Copyright (C) 2004 Takashi SHUDO <shudo@hitachi-ul.co.jp>
+ */
+
+#undef INTC_IPRA
+#undef INTC_IPRB
+#undef INTC_IPRC
+#undef INTC_IPRD
+
+#undef DMTE0_IRQ
+#undef DMTE1_IRQ
+#undef DMTE2_IRQ
+#undef DMTE3_IRQ
+#undef DMTE4_IRQ
+#undef DMTE5_IRQ
+#undef DMTE6_IRQ
+#undef DMTE7_IRQ
+#undef DMAE_IRQ
+#undef DMA_IPR_ADDR
+#undef DMA_IPR_POS
+#undef DMA_PRIORITY
+
+#undef NR_IRQS
+
+#undef __irq_demux
+#undef irq_demux
+
+#undef INTC_IMCR0
+#undef INTC_IMCR1
+#undef INTC_IMCR2
+#undef INTC_IMCR3
+#undef INTC_IMCR4
+#undef INTC_IMCR5
+#undef INTC_IMCR6
+#undef INTC_IMCR7
+#undef INTC_IMCR8
+#undef INTC_IMCR9
+#undef INTC_IMCR10
+
+
+#define INTC_IPRA  	0xA4080000UL
+#define INTC_IPRB  	0xA4080004UL
+#define INTC_IPRC  	0xA4080008UL
+#define INTC_IPRD  	0xA408000CUL
+#define INTC_IPRE  	0xA4080010UL
+#define INTC_IPRF  	0xA4080014UL
+#define INTC_IPRG  	0xA4080018UL
+#define INTC_IPRH  	0xA408001CUL
+#define INTC_IPRI  	0xA4080020UL
+#define INTC_IPRJ  	0xA4080024UL
+#define INTC_IPRK  	0xA4080028UL
+
+#define INTC_IMR0	0xA4080080UL
+#define INTC_IMR1	0xA4080084UL
+#define INTC_IMR2	0xA4080088UL
+#define INTC_IMR3	0xA408008CUL
+#define INTC_IMR4	0xA4080090UL
+#define INTC_IMR5	0xA4080094UL
+#define INTC_IMR6	0xA4080098UL
+#define INTC_IMR7	0xA408009CUL
+#define INTC_IMR8	0xA40800A0UL
+#define INTC_IMR9	0xA40800A4UL
+#define INTC_IMR10	0xA40800A8UL
+#define INTC_IMR11	0xA40800ACUL
+
+#define INTC_IMCR0	0xA40800C0UL
+#define INTC_IMCR1	0xA40800C4UL
+#define INTC_IMCR2	0xA40800C8UL
+#define INTC_IMCR3	0xA40800CCUL
+#define INTC_IMCR4	0xA40800D0UL
+#define INTC_IMCR5	0xA40800D4UL
+#define INTC_IMCR6	0xA40800D8UL
+#define INTC_IMCR7	0xA40800DCUL
+#define INTC_IMCR8	0xA40800E0UL
+#define INTC_IMCR9	0xA40800E4UL
+#define INTC_IMCR10	0xA40800E8UL
+#define INTC_IMCR11	0xA40800ECUL
+
+#define INTC_ICR0	0xA4140000UL
+#define INTC_ICR1	0xA414001CUL
+
+#define INTMSK0		0xa4140044
+#define INTMSKCLR0	0xa4140064
+#define INTC_INTPRI0	0xa4140010
+
+/*
+  NOTE:
+
+  *_IRQ = (INTEVT2 - 0x200)/0x20
+*/
+
+/* TMU0 */
+#define TMU0_IRQ	16
+#define TMU0_IPR_ADDR	INTC_IPRA
+#define TMU0_IPR_POS	 3
+#define TMU0_PRIORITY	 2
+
+#define TIMER_IRQ       16
+#define TIMER_IPR_ADDR  INTC_IPRA
+#define TIMER_IPR_POS    3
+#define TIMER_PRIORITY   2
+
+/* TMU1 */
+#define TMU1_IRQ	17
+#define TMU1_IPR_ADDR	INTC_IPRA
+#define TMU1_IPR_POS	 2
+#define TMU1_PRIORITY	 2
+
+/* TMU2 */
+#define TMU2_IRQ	18
+#define TMU2_IPR_ADDR	INTC_IPRA
+#define TMU2_IPR_POS	 1
+#define TMU2_PRIORITY	 2
+
+/* LCDC */
+#define LCDC_IRQ	28
+#define LCDC_IPR_ADDR	INTC_IPRB
+#define LCDC_IPR_POS	 2
+#define LCDC_PRIORITY	 2
+
+/* VIO (Video I/O) */
+#define CEU_IRQ		52
+#define BEU_IRQ		53
+#define VEU_IRQ		54
+#define VOU_IRQ		55
+#define VIO_IPR_ADDR	INTC_IPRE
+#define VIO_IPR_POS	 2
+#define VIO_PRIORITY	 2
+
+/* MFI (Multi Functional Interface) */
+#define MFI_IRQ		56
+#define MFI_IPR_ADDR	INTC_IPRE
+#define MFI_IPR_POS	 1
+#define MFI_PRIORITY	 2
+
+/* VPU (Video Processing Unit) */
+#define VPU_IRQ		60
+#define VPU_IPR_ADDR	INTC_IPRE
+#define VPU_IPR_POS	 0
+#define VPU_PRIORITY	 2
+
+/* 3DG */
+#define TDG_IRQ		63
+#define TDG_IPR_ADDR	INTC_IPRJ
+#define TDG_IPR_POS	 2
+#define TDG_PRIORITY	 2
+
+/* DMAC(1) */
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMA1_IPR_ADDR	INTC_IPRE
+#define DMA1_IPR_POS	3
+#define DMA1_PRIORITY	7
+
+/* DMAC(2) */
+#define DMTE4_IRQ	76
+#define DMTE5_IRQ	77
+#define DMA2_IPR_ADDR	INTC_IPRF
+#define DMA2_IPR_POS	2
+#define DMA2_PRIORITY	7
+
+/* SCIF0 */
+#define SCIF_ERI_IRQ	80
+#define SCIF_RXI_IRQ	81
+#define SCIF_BRI_IRQ	82
+#define SCIF_TXI_IRQ	83
+#define SCIF_IPR_ADDR	INTC_IPRG
+#define SCIF_IPR_POS	3
+#define SCIF_PRIORITY	3
+
+/* SIOF0 */
+#define SIOF0_IRQ	84
+#define SIOF0_IPR_ADDR	INTC_IPRH
+#define SIOF0_IPR_POS	3
+#define SIOF0_PRIORITY	3
+
+/* FLCTL (Flash Memory Controller) */
+#define FLSTE_IRQ	92
+#define FLTEND_IRQ	93
+#define FLTRQ0_IRQ	94
+#define FLTRQ1_IRQ	95
+#define FLCTL_IPR_ADDR	INTC_IPRH
+#define FLCTL_IPR_POS	1
+#define FLCTL_PRIORITY	3
+
+/* IIC(0) (IIC Bus Interface) */
+#define IIC0_ALI_IRQ	96
+#define IIC0_TACKI_IRQ	97
+#define IIC0_WAITI_IRQ	98
+#define IIC0_DTEI_IRQ	99
+#define IIC0_IPR_ADDR	INTC_IPRH
+#define IIC0_IPR_POS	0
+#define IIC0_PRIORITY	3
+
+/* IIC(1) (IIC Bus Interface) */
+#define IIC1_ALI_IRQ	44
+#define IIC1_TACKI_IRQ	45
+#define IIC1_WAITI_IRQ	46
+#define IIC1_DTEI_IRQ	47
+#define IIC1_IPR_ADDR	INTC_IPRG
+#define IIC1_IPR_POS	0
+#define IIC1_PRIORITY	3
+
+/* SIO0 */
+#define SIO0_IRQ	88
+#define SIO0_IPR_ADDR	INTC_IPRI
+#define SIO0_IPR_POS	3
+#define SIO0_PRIORITY	3
+
+/* SDHI */
+#define SDHI_SDHII0_IRQ	100
+#define SDHI_SDHII1_IRQ	101
+#define SDHI_SDHII2_IRQ	102
+#define SDHI_SDHII3_IRQ	103
+#define SDHI_IPR_ADDR	INTC_IPRK
+#define SDHI_IPR_POS	0
+#define SDHI_PRIORITY	3
+
+/* SIU (Sound Interface Unit) */
+#define SIU_IRQ		108
+#define SIU_IPR_ADDR	INTC_IPRJ
+#define SIU_IPR_POS	1
+#define SIU_PRIORITY	3
+
+
+/* ONCHIP_NR_IRQS */
+#define NR_IRQS 109
+
+/* In a generic kernel, NR_IRQS is an upper bound, and we should use
+ * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
+ */
+#define ACTUAL_NR_IRQS NR_IRQS
+
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * Function for "on chip support modules".
+ */
+extern void make_ipr_irq(unsigned int irq, unsigned int addr,
+			 int pos,  int priority);
+extern void make_imask_irq(unsigned int irq);
+
+#define PORT_PACR	0xA4050100UL
+#define PORT_PBCR	0xA4050102UL
+#define PORT_PCCR	0xA4050104UL
+#define PORT_PDCR	0xA4050106UL
+#define PORT_PECR	0xA4050108UL
+#define PORT_PFCR	0xA405010AUL
+#define PORT_PGCR	0xA405010CUL
+#define PORT_PHCR	0xA405010EUL
+#define PORT_PJCR	0xA4050110UL
+#define PORT_PKCR	0xA4050112UL
+#define PORT_PLCR	0xA4050114UL
+#define PORT_SCPCR	0xA4050116UL
+#define PORT_PMCR	0xA4050118UL
+#define PORT_PNCR	0xA405011AUL
+#define PORT_PQCR	0xA405011CUL
+#define PORT_PRCR	0xA405011EUL
+#define PORT_PTCR	0xA405014CUL
+#define PORT_PUCR	0xA405014EUL
+#define PORT_PVCR	0xA4050150UL
+
+#define PORT_PSELA	0xA4050140UL
+#define PORT_PSELB	0xA4050142UL
+#define PORT_PSELC	0xA4050144UL
+#define PORT_PSELE	0xA4050158UL
+
+#define PORT_HIZCRA	0xA4050146UL
+#define PORT_HIZCRB	0xA4050148UL
+#define PORT_DRVCR	0xA405014AUL
+
+#define PORT_PADR  	0xA4050120UL
+#define PORT_PBDR  	0xA4050122UL
+#define PORT_PCDR  	0xA4050124UL
+#define PORT_PDDR  	0xA4050126UL
+#define PORT_PEDR  	0xA4050128UL
+#define PORT_PFDR  	0xA405012AUL
+#define PORT_PGDR  	0xA405012CUL
+#define PORT_PHDR  	0xA405012EUL
+#define PORT_PJDR  	0xA4050130UL
+#define PORT_PKDR  	0xA4050132UL
+#define PORT_PLDR  	0xA4050134UL
+#define PORT_SCPDR  	0xA4050136UL
+#define PORT_PMDR  	0xA4050138UL
+#define PORT_PNDR  	0xA405013AUL
+#define PORT_PQDR  	0xA405013CUL
+#define PORT_PRDR  	0xA405013EUL
+#define PORT_PTDR  	0xA405016CUL
+#define PORT_PUDR  	0xA405016EUL
+#define PORT_PVDR  	0xA4050170UL
+
+#define IRQ0_IRQ	32
+#define IRQ1_IRQ	33
+#define IRQ2_IRQ	34
+#define IRQ3_IRQ	35
+#define IRQ4_IRQ	36
+#define IRQ5_IRQ	37
+#define IRQ6_IRQ	38
+#define IRQ7_IRQ	39
+
+#define INTPRI00	0xA4140010UL
+
+#define IRQ0_IPR_ADDR	INTPRI00
+#define IRQ1_IPR_ADDR	INTPRI00
+#define IRQ2_IPR_ADDR	INTPRI00
+#define IRQ3_IPR_ADDR	INTPRI00
+#define IRQ4_IPR_ADDR	INTPRI00
+#define IRQ5_IPR_ADDR	INTPRI00
+#define IRQ6_IPR_ADDR	INTPRI00
+#define IRQ7_IPR_ADDR	INTPRI00
+
+#define IRQ0_IPR_POS	7
+#define IRQ1_IPR_POS	6
+#define IRQ2_IPR_POS	5
+#define IRQ3_IPR_POS	4
+#define IRQ4_IPR_POS	3
+#define IRQ5_IPR_POS	2
+#define IRQ6_IPR_POS	1
+#define IRQ7_IPR_POS	0
+
+#define IRQ0_PRIORITY	1
+#define IRQ1_PRIORITY	1
+#define IRQ2_PRIORITY	1
+#define IRQ3_PRIORITY	1
+#define IRQ4_PRIORITY	1
+#define IRQ5_PRIORITY	1
+#define IRQ6_PRIORITY	1
+#define IRQ7_PRIORITY	1
+
+extern int shmse_irq_demux(int irq);
+#define __irq_demux(irq) shmse_irq_demux(irq)
+#define irq_demux(irq) __irq_demux(irq)
+
+#endif /* __ASM_SH_IRQ_SH73180_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
new file mode 100644
index 000000000000..831e52ee45b5
--- /dev/null
+++ b/include/asm-sh/irq.h
@@ -0,0 +1,598 @@
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+/*
+ *
+ * linux/include/asm-sh/irq.h
+ *
+ * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/machvec.h>
+#include <asm/ptrace.h>		/* for pt_regs */
+
+#if defined(CONFIG_SH_HP600) || \
+    defined(CONFIG_SH_RTS7751R2D) || \
+    defined(CONFIG_SH_HS7751RVOIP) || \
+    defined(CONFIG_SH_SH03)
+#include <asm/mach/ide.h>
+#endif
+
+#if defined(CONFIG_CPU_SH3)
+#define INTC_IPRA	0xfffffee2UL
+#define INTC_IPRB	0xfffffee4UL
+#elif defined(CONFIG_CPU_SH4)
+#define INTC_IPRA	0xffd00004UL
+#define INTC_IPRB	0xffd00008UL
+#define INTC_IPRC	0xffd0000cUL
+#define INTC_IPRD	0xffd00010UL
+#endif
+
+#ifdef CONFIG_IDE
+# ifndef IRQ_CFCARD
+#  define IRQ_CFCARD	14
+# endif
+# ifndef IRQ_PCMCIA
+#  define IRQ_PCMCIA	15
+# endif
+#endif
+
+#define TIMER_IRQ	16
+#define TIMER_IPR_ADDR	INTC_IPRA
+#define TIMER_IPR_POS	 3
+#define TIMER_PRIORITY	 2
+
+#define TIMER1_IRQ	17
+#define TIMER1_IPR_ADDR	INTC_IPRA
+#define TIMER1_IPR_POS	 2
+#define TIMER1_PRIORITY	 4
+
+#define RTC_IRQ		22
+#define RTC_IPR_ADDR	INTC_IPRA
+#define RTC_IPR_POS	 0
+#define RTC_PRIORITY	TIMER_PRIORITY
+
+#if defined(CONFIG_CPU_SH3)
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMA_IPR_ADDR	INTC_IPRE
+#define DMA_IPR_POS	3
+#define DMA_PRIORITY	7
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+/* TMU2 */
+#define TIMER2_IRQ      18
+#define TIMER2_IPR_ADDR INTC_IPRA
+#define TIMER2_IPR_POS   1
+#define TIMER2_PRIORITY  2
+
+/* WDT */
+#define WDT_IRQ		27
+#define WDT_IPR_ADDR	INTC_IPRB
+#define WDT_IPR_POS	 3
+#define WDT_PRIORITY	 2
+
+/* SIM (SIM Card Module) */
+#define SIM_ERI_IRQ	23
+#define SIM_RXI_IRQ	24
+#define SIM_TXI_IRQ	25
+#define SIM_TEND_IRQ	26
+#define SIM_IPR_ADDR	INTC_IPRB
+#define SIM_IPR_POS	 1
+#define SIM_PRIORITY	 2
+
+/* VIO (Video I/O) */
+#define VIO_IRQ		52
+#define VIO_IPR_ADDR	INTC_IPRE
+#define VIO_IPR_POS	 2
+#define VIO_PRIORITY	 2
+
+/* MFI (Multi Functional Interface) */
+#define MFI_IRQ		56
+#define MFI_IPR_ADDR	INTC_IPRE
+#define MFI_IPR_POS	 1
+#define MFI_PRIORITY	 2
+
+/* VPU (Video Processing Unit) */
+#define VPU_IRQ		60
+#define VPU_IPR_ADDR	INTC_IPRE
+#define VPU_IPR_POS	 0
+#define VPU_PRIORITY	 2
+
+/* KEY (Key Scan Interface) */
+#define KEY_IRQ		79
+#define KEY_IPR_ADDR	INTC_IPRF
+#define KEY_IPR_POS	 3
+#define KEY_PRIORITY	 2
+
+/* CMT (Compare Match Timer) */
+#define CMT_IRQ		104
+#define CMT_IPR_ADDR	INTC_IPRF
+#define CMT_IPR_POS	 0
+#define CMT_PRIORITY	 2
+
+/* DMAC(1) */
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMA1_IPR_ADDR	INTC_IPRE
+#define DMA1_IPR_POS	3
+#define DMA1_PRIORITY	7
+
+/* DMAC(2) */
+#define DMTE4_IRQ	76
+#define DMTE5_IRQ	77
+#define DMA2_IPR_ADDR	INTC_IPRF
+#define DMA2_IPR_POS	2
+#define DMA2_PRIORITY	7
+
+/* SIOF0 */
+#define SIOF0_IRQ	84
+#define SIOF0_IPR_ADDR	INTC_IPRH
+#define SIOF0_IPR_POS	3
+#define SIOF0_PRIORITY	3
+
+/* FLCTL (Flash Memory Controller) */
+#define FLSTE_IRQ	92
+#define FLTEND_IRQ	93
+#define FLTRQ0_IRQ	94
+#define FLTRQ1_IRQ	95
+#define FLCTL_IPR_ADDR	INTC_IPRH
+#define FLCTL_IPR_POS	1
+#define FLCTL_PRIORITY	3
+
+/* IIC (IIC Bus Interface) */
+#define IIC_ALI_IRQ	96
+#define IIC_TACKI_IRQ	97
+#define IIC_WAITI_IRQ	98
+#define IIC_DTEI_IRQ	99
+#define IIC_IPR_ADDR	INTC_IPRH
+#define IIC_IPR_POS	0
+#define IIC_PRIORITY	3
+
+/* SIO0 */
+#define SIO0_IRQ	88
+#define SIO0_IPR_ADDR	INTC_IPRI
+#define SIO0_IPR_POS	3
+#define SIO0_PRIORITY	3
+
+/* SIU (Sound Interface Unit) */
+#define SIU_IRQ		108
+#define SIU_IPR_ADDR	INTC_IPRJ
+#define SIU_IPR_POS	1
+#define SIU_PRIORITY	3
+
+#endif
+#elif defined(CONFIG_CPU_SH4)
+#define DMTE0_IRQ	34
+#define DMTE1_IRQ	35
+#define DMTE2_IRQ	36
+#define DMTE3_IRQ	37
+#define DMTE4_IRQ	44	/* 7751R only */
+#define DMTE5_IRQ	45	/* 7751R only */
+#define DMTE6_IRQ	46	/* 7751R only */
+#define DMTE7_IRQ	47	/* 7751R only */
+#define DMAE_IRQ	38
+#define DMA_IPR_ADDR	INTC_IPRC
+#define DMA_IPR_POS	2
+#define DMA_PRIORITY	7
+#endif
+
+#if defined (CONFIG_CPU_SUBTYPE_SH7707) || defined (CONFIG_CPU_SUBTYPE_SH7708) || \
+    defined (CONFIG_CPU_SUBTYPE_SH7709) || defined (CONFIG_CPU_SUBTYPE_SH7750) || \
+    defined (CONFIG_CPU_SUBTYPE_SH7751)
+#define SCI_ERI_IRQ	23
+#define SCI_RXI_IRQ	24
+#define SCI_TXI_IRQ	25
+#define SCI_IPR_ADDR	INTC_IPRB
+#define SCI_IPR_POS	1
+#define SCI_PRIORITY	3
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#define SCIF0_IRQ	80
+#define SCIF0_IPR_ADDR	INTC_IPRG
+#define SCIF0_IPR_POS	3
+#define SCIF0_PRIORITY	3
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define SCIF_ERI_IRQ	56
+#define SCIF_RXI_IRQ	57
+#define SCIF_BRI_IRQ	58
+#define SCIF_TXI_IRQ	59
+#define SCIF_IPR_ADDR	INTC_IPRE
+#define SCIF_IPR_POS	1
+#define SCIF_PRIORITY	3
+
+#define IRDA_ERI_IRQ	52
+#define IRDA_RXI_IRQ	53
+#define IRDA_BRI_IRQ	54
+#define IRDA_TXI_IRQ	55
+#define IRDA_IPR_ADDR	INTC_IPRE
+#define IRDA_IPR_POS	2
+#define IRDA_PRIORITY	3
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+      defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202)
+#define SCIF_ERI_IRQ	40
+#define SCIF_RXI_IRQ	41
+#define SCIF_BRI_IRQ	42
+#define SCIF_TXI_IRQ	43
+#define SCIF_IPR_ADDR	INTC_IPRC
+#define SCIF_IPR_POS	1
+#define SCIF_PRIORITY	3
+#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+#define SCIF1_ERI_IRQ	23
+#define SCIF1_RXI_IRQ	24
+#define SCIF1_BRI_IRQ	25
+#define SCIF1_TXI_IRQ	26
+#define SCIF1_IPR_ADDR	INTC_IPRB
+#define SCIF1_IPR_POS	1
+#define SCIF1_PRIORITY	3
+#endif
+#endif
+
+/* NR_IRQS is made from three components:
+ *   1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
+ *   2. PINT_NR_IRQS   - number of PINT interrupts
+ *   3. OFFCHIP_NR_IRQS - numbe of IRQs from off-chip peripherial modules
+ */
+
+/* 1. ONCHIP_NR_IRQS */
+#ifdef CONFIG_SH_GENERIC
+# define ONCHIP_NR_IRQS 144
+#else
+# if defined(CONFIG_CPU_SUBTYPE_SH7604)
+#  define ONCHIP_NR_IRQS 24	// Actually 21
+# elif defined(CONFIG_CPU_SUBTYPE_SH7707)
+#  define ONCHIP_NR_IRQS 64
+#  define PINT_NR_IRQS   16
+# elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+#  define ONCHIP_NR_IRQS 32
+# elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+       defined(CONFIG_CPU_SUBTYPE_SH7705)
+#  define ONCHIP_NR_IRQS 64	// Actually 61
+#  define PINT_NR_IRQS   16
+# elif defined(CONFIG_CPU_SUBTYPE_SH7750)
+#  define ONCHIP_NR_IRQS 48	// Actually 44
+# elif defined(CONFIG_CPU_SUBTYPE_SH7751)
+#  define ONCHIP_NR_IRQS 72
+# elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+#  define ONCHIP_NR_IRQS 110
+# elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+#  define ONCHIP_NR_IRQS 72
+# elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+#  define ONCHIP_NR_IRQS 144
+# elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+#  define ONCHIP_NR_IRQS 109
+# endif
+#endif
+
+/* 2. PINT_NR_IRQS */
+#ifdef CONFIG_SH_GENERIC
+# define PINT_NR_IRQS 16
+#else
+# ifndef PINT_NR_IRQS
+#  define PINT_NR_IRQS 0
+# endif
+#endif
+
+#if PINT_NR_IRQS > 0
+# define PINT_IRQ_BASE  ONCHIP_NR_IRQS
+#endif
+
+/* 3. OFFCHIP_NR_IRQS */
+#ifdef CONFIG_SH_GENERIC
+# define OFFCHIP_NR_IRQS 16
+#else
+# if defined(CONFIG_HD64461)
+#  define OFFCHIP_NR_IRQS 18
+# elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
+#  define OFFCHIP_NR_IRQS 48
+# elif defined(CONFIG_HD64465)
+#  define OFFCHIP_NR_IRQS 16
+# elif defined (CONFIG_SH_EC3104)
+#  define OFFCHIP_NR_IRQS 16
+# elif defined (CONFIG_SH_DREAMCAST)
+#  define OFFCHIP_NR_IRQS 96
+# else
+#  define OFFCHIP_NR_IRQS 0
+# endif
+#endif
+
+#if OFFCHIP_NR_IRQS > 0
+# define OFFCHIP_IRQ_BASE (ONCHIP_NR_IRQS + PINT_NR_IRQS)
+#endif
+
+/* NR_IRQS. 1+2+3 */
+#define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)
+
+/* In a generic kernel, NR_IRQS is an upper bound, and we should use
+ * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
+ */
+#ifdef CONFIG_SH_GENERIC
+# define ACTUAL_NR_IRQS (sh_mv.mv_nr_irqs)
+#else
+# define ACTUAL_NR_IRQS NR_IRQS
+#endif
+
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * Function for "on chip support modules".
+ */
+extern void make_ipr_irq(unsigned int irq, unsigned int addr,
+			 int pos,  int priority);
+extern void make_imask_irq(unsigned int irq);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#undef INTC_IPRA
+#undef INTC_IPRB
+#define INTC_IPRA  	0xA414FEE2UL
+#define INTC_IPRB  	0xA414FEE4UL
+#define INTC_IPRC  	0xA4140016UL
+#define INTC_IPRD  	0xA4140018UL
+#define INTC_IPRE  	0xA414001AUL
+#define INTC_IPRF  	0xA4080000UL
+#define INTC_IPRG  	0xA4080002UL
+#define INTC_IPRH  	0xA4080004UL
+#define INTC_IPRI  	0xA4080006UL
+#define INTC_IPRJ  	0xA4080008UL
+
+#define INTC_IMR0	0xA4080040UL
+#define INTC_IMR1	0xA4080042UL
+#define INTC_IMR2	0xA4080044UL
+#define INTC_IMR3	0xA4080046UL
+#define INTC_IMR4	0xA4080048UL
+#define INTC_IMR5	0xA408004AUL
+#define INTC_IMR6	0xA408004CUL
+#define INTC_IMR7	0xA408004EUL
+#define INTC_IMR8	0xA4080050UL
+#define INTC_IMR9	0xA4080052UL
+#define INTC_IMR10	0xA4080054UL
+
+#define INTC_IMCR0	0xA4080060UL
+#define INTC_IMCR1	0xA4080062UL
+#define INTC_IMCR2	0xA4080064UL
+#define INTC_IMCR3	0xA4080066UL
+#define INTC_IMCR4	0xA4080068UL
+#define INTC_IMCR5	0xA408006AUL
+#define INTC_IMCR6	0xA408006CUL
+#define INTC_IMCR7	0xA408006EUL
+#define INTC_IMCR8	0xA4080070UL
+#define INTC_IMCR9	0xA4080072UL
+#define INTC_IMCR10	0xA4080074UL
+
+#define INTC_ICR0	0xA414FEE0UL
+#define INTC_ICR1	0xA4140010UL
+
+#define INTC_IRR0	0xA4140004UL
+
+#define PORT_PACR	0xA4050100UL
+#define PORT_PBCR	0xA4050102UL
+#define PORT_PCCR	0xA4050104UL
+#define PORT_PDCR	0xA4050106UL
+#define PORT_PECR	0xA4050108UL
+#define PORT_PFCR	0xA405010AUL
+#define PORT_PGCR	0xA405010CUL
+#define PORT_PHCR	0xA405010EUL
+#define PORT_PJCR	0xA4050110UL
+#define PORT_PKCR	0xA4050112UL
+#define PORT_PLCR	0xA4050114UL
+#define PORT_SCPCR	0xA4050116UL
+#define PORT_PMCR	0xA4050118UL
+#define PORT_PNCR	0xA405011AUL
+#define PORT_PQCR	0xA405011CUL
+
+#define PORT_PSELA	0xA4050140UL
+#define PORT_PSELB	0xA4050142UL
+#define PORT_PSELC	0xA4050144UL
+
+#define PORT_HIZCRA	0xA4050146UL
+#define PORT_HIZCRB	0xA4050148UL
+#define PORT_DRVCR	0xA4050150UL
+
+#define PORT_PADR  	0xA4050120UL
+#define PORT_PBDR  	0xA4050122UL
+#define PORT_PCDR  	0xA4050124UL
+#define PORT_PDDR  	0xA4050126UL
+#define PORT_PEDR  	0xA4050128UL
+#define PORT_PFDR  	0xA405012AUL
+#define PORT_PGDR  	0xA405012CUL
+#define PORT_PHDR  	0xA405012EUL
+#define PORT_PJDR  	0xA4050130UL
+#define PORT_PKDR  	0xA4050132UL
+#define PORT_PLDR  	0xA4050134UL
+#define PORT_SCPDR  	0xA4050136UL
+#define PORT_PMDR  	0xA4050138UL
+#define PORT_PNDR  	0xA405013AUL
+#define PORT_PQDR  	0xA405013CUL
+
+#define IRQ0_IRQ	32
+#define IRQ1_IRQ	33
+#define IRQ2_IRQ	34
+#define IRQ3_IRQ	35
+#define IRQ4_IRQ	36
+#define IRQ5_IRQ	37
+
+#define IRQ0_IPR_ADDR	INTC_IPRC
+#define IRQ1_IPR_ADDR	INTC_IPRC
+#define IRQ2_IPR_ADDR	INTC_IPRC
+#define IRQ3_IPR_ADDR	INTC_IPRC
+#define IRQ4_IPR_ADDR	INTC_IPRD
+#define IRQ5_IPR_ADDR	INTC_IPRD
+
+#define IRQ0_IPR_POS	0
+#define IRQ1_IPR_POS	1
+#define IRQ2_IPR_POS	2
+#define IRQ3_IPR_POS	3
+#define IRQ4_IPR_POS	0
+#define IRQ5_IPR_POS	1
+
+#define IRQ0_PRIORITY	1
+#define IRQ1_PRIORITY	1
+#define IRQ2_PRIORITY	1
+#define IRQ3_PRIORITY	1
+#define IRQ4_PRIORITY	1
+#define IRQ5_PRIORITY	1
+
+extern int ipr_irq_demux(int irq);
+#define __irq_demux(irq) ipr_irq_demux(irq)
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7604)
+#define INTC_IPRA	0xfffffee2UL
+#define INTC_IPRB	0xfffffe60UL
+
+#define INTC_VCRA	0xfffffe62UL
+#define INTC_VCRB	0xfffffe64UL
+#define INTC_VCRC	0xfffffe66UL
+#define INTC_VCRD	0xfffffe68UL
+
+#define INTC_VCRWDT	0xfffffee4UL
+#define INTC_VCRDIV	0xffffff0cUL
+#define INTC_VCRDMA0	0xffffffa0UL
+#define INTC_VCRDMA1	0xffffffa8UL
+
+#define INTC_ICR	0xfffffee0UL
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define INTC_IRR0	0xa4000004UL
+#define INTC_IRR1	0xa4000006UL
+#define INTC_IRR2	0xa4000008UL
+
+#define INTC_ICR0	0xfffffee0UL
+#define INTC_ICR1	0xa4000010UL
+#define INTC_ICR2	0xa4000012UL
+#define INTC_INTER	0xa4000014UL
+
+#define INTC_IPRC	0xa4000016UL
+#define INTC_IPRD	0xa4000018UL
+#define INTC_IPRE	0xa400001aUL
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+#define INTC_IPRF	0xa400001cUL
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define INTC_IPRF	0xa4080000UL
+#define INTC_IPRG	0xa4080002UL
+#define INTC_IPRH	0xa4080004UL
+#endif
+
+#define PORT_PACR	0xa4000100UL
+#define PORT_PBCR	0xa4000102UL
+#define PORT_PCCR	0xa4000104UL
+#define PORT_PFCR	0xa400010aUL
+#define PORT_PADR  	0xa4000120UL
+#define PORT_PBDR  	0xa4000122UL
+#define PORT_PCDR  	0xa4000124UL
+#define PORT_PFDR  	0xa400012aUL
+
+#define IRQ0_IRQ	32
+#define IRQ1_IRQ	33
+#define IRQ2_IRQ	34
+#define IRQ3_IRQ	35
+#define IRQ4_IRQ	36
+#define IRQ5_IRQ	37
+
+#define IRQ0_IPR_ADDR	INTC_IPRC
+#define IRQ1_IPR_ADDR	INTC_IPRC
+#define IRQ2_IPR_ADDR	INTC_IPRC
+#define IRQ3_IPR_ADDR	INTC_IPRC
+#define IRQ4_IPR_ADDR	INTC_IPRD
+#define IRQ5_IPR_ADDR	INTC_IPRD
+
+#define IRQ0_IPR_POS	0
+#define IRQ1_IPR_POS	1
+#define IRQ2_IPR_POS	2
+#define IRQ3_IPR_POS	3
+#define IRQ4_IPR_POS	0
+#define IRQ5_IPR_POS	1
+
+#define IRQ0_PRIORITY	1
+#define IRQ1_PRIORITY	1
+#define IRQ2_PRIORITY	1
+#define IRQ3_PRIORITY	1
+#define IRQ4_PRIORITY	1
+#define IRQ5_PRIORITY	1
+
+#define PINT0_IRQ	40
+#define PINT8_IRQ	41
+
+#define PINT0_IPR_ADDR	INTC_IPRD
+#define PINT8_IPR_ADDR	INTC_IPRD
+
+#define PINT0_IPR_POS	3
+#define PINT8_IPR_POS	2
+#define PINT0_PRIORITY	2
+#define PINT8_PRIORITY	2
+
+extern int ipr_irq_demux(int irq);
+#define __irq_demux(irq) ipr_irq_demux(irq)
+
+#else
+#define __irq_demux(irq) irq
+#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+    defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202)
+#define INTC_ICR        0xffd00000
+#define INTC_ICR_NMIL	(1<<15)
+#define INTC_ICR_MAI	(1<<14)
+#define INTC_ICR_NMIB	(1<<9)
+#define INTC_ICR_NMIE	(1<<8)
+#define INTC_ICR_IRLM	(1<<7)
+#endif
+
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+
+#define INTC2_FIRST_IRQ 64
+#define NR_INTC2_IRQS 25
+
+#define INTC2_BASE	0xfe080000
+#define INTC2_INTC2MODE	(INTC2_BASE+0x80)
+
+#define INTC2_INTPRI_OFFSET	0x00
+#define INTC2_INTREQ_OFFSET	0x20
+#define INTC2_INTMSK_OFFSET	0x40
+#define INTC2_INTMSKCLR_OFFSET	0x60
+
+void make_intc2_irq(unsigned int irq,
+		    unsigned int ipr_offset, unsigned int ipr_shift,
+		    unsigned int msk_offset, unsigned int msk_shift,
+		    unsigned int priority);
+void init_IRQ_intc2(void);
+void intc2_add_clear_irq(int irq, int (*fn)(int));
+
+#endif	/* CONFIG_CPU_SUBTYPE_ST40STB1 */
+
+static inline int generic_irq_demux(int irq)
+{
+	return irq;
+}
+
+#define irq_canonicalize(irq)	(irq)
+#define irq_demux(irq)		__irq_demux(sh_mv.mv_irq_demux(irq))
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH73180)
+#include <asm/irq-sh73180.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h
new file mode 100644
index 000000000000..1103df003243
--- /dev/null
+++ b/include/asm-sh/keyboard.h
@@ -0,0 +1,14 @@
+#ifndef	__ASM_SH_KEYBOARD_H
+#define	__ASM_SH_KEYBOARD_H
+/*
+ *	$Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
+ */
+
+#include <linux/kd.h>
+#include <linux/config.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SH_MPC1211
+#include <asm/mpc1211/keyboard-mpc1211.h>
+#endif
+#endif
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
new file mode 100644
index 000000000000..1653ffb75fbe
--- /dev/null
+++ b/include/asm-sh/kgdb.h
@@ -0,0 +1,131 @@
+/*
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on original code by Glenn Engel, Jim Kingdon,
+ * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
+ * Amit S. Kale <akale@veritas.com>
+ * 
+ * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
+ * Henry Bell <henry.bell@st.com>
+ * 
+ * Header file for low-level support for remote debug using GDB. 
+ *
+ */
+
+#ifndef __KGDB_H
+#define __KGDB_H
+
+#include <asm/ptrace.h>
+
+struct console;
+
+/* Same as pt_regs but has vbr in place of syscall_nr */
+struct kgdb_regs {
+        unsigned long regs[16];
+        unsigned long pc;
+        unsigned long pr;
+        unsigned long sr;
+        unsigned long gbr;
+        unsigned long mach;
+        unsigned long macl;
+        unsigned long vbr;
+};
+
+/* State info */
+extern char kgdb_in_gdb_mode;
+extern int kgdb_done_init;
+extern int kgdb_enabled;
+extern int kgdb_nofault;	/* Ignore bus errors (in gdb mem access) */
+extern int kgdb_halt;		/* Execute initial breakpoint at startup */
+extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
+
+/* SCI */
+extern int kgdb_portnum;
+extern int kgdb_baud;
+extern char kgdb_parity;
+extern char kgdb_bits;
+extern int kgdb_console_setup(struct console *, char *);
+
+/* Init and interface stuff */
+extern int kgdb_init(void);
+extern int (*kgdb_serial_setup)(void);
+extern int (*kgdb_getchar)(void);
+extern void (*kgdb_putchar)(int);
+
+struct kgdb_sermap {
+	char *name;
+	int namelen;
+	int (*setup_fn)(struct console *, char *);
+	struct kgdb_sermap *next;
+};
+extern void kgdb_register_sermap(struct kgdb_sermap *map);
+extern struct kgdb_sermap *kgdb_porttype;
+
+/* Trap functions */
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); 
+typedef void (kgdb_bus_error_hook_t)(void);
+extern kgdb_debug_hook_t  *kgdb_debug_hook;
+extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
+
+extern void breakpoint(void);
+
+/* Console */
+struct console;
+void kgdb_console_write(struct console *co, const char *s, unsigned count);
+void kgdb_console_init(void);
+
+/* Prototypes for jmp fns */
+#define _JBLEN 9
+typedef        int jmp_buf[_JBLEN];
+extern void    longjmp(jmp_buf __jmpb, int __retval);
+extern int     setjmp(jmp_buf __jmpb);
+
+/* Variadic macro to print our own message to the console */
+#define KGDB_PRINTK(...) printk("KGDB: " __VA_ARGS__)
+
+/* Forced breakpoint */
+#define BREAKPOINT() do {                                     \
+  if (kgdb_enabled) {                                         \
+    asm volatile("trapa   #0xff");                            \
+  }                                                           \
+} while (0)
+
+/* KGDB should be able to flush all kernel text space */
+#if defined(CONFIG_CPU_SH4)
+#define kgdb_flush_icache_range(start, end) \
+{									\
+	extern void __flush_purge_region(void *, int);			\
+	__flush_purge_region((void*)(start), (int)(end) - (int)(start));\
+	flush_icache_range((start), (end));				\
+}
+#else
+#define kgdb_flush_icache_range(start, end)	do { } while (0)
+#endif
+
+/* Kernel assert macros */
+#ifdef CONFIG_KGDB_KERNEL_ASSERTS
+
+/* Predefined conditions */
+#define KA_VALID_ERRNO(errno) ((errno) > 0 && (errno) <= EMEDIUMTYPE)
+#define KA_VALID_PTR_ERR(ptr) KA_VALID_ERRNO(-PTR_ERR(ptr))
+#define KA_VALID_KPTR(ptr)  (!(ptr) || \
+              ((void *)(ptr) >= (void *)PAGE_OFFSET &&  \
+               (void *)(ptr) < ERR_PTR(-EMEDIUMTYPE)))
+#define KA_VALID_PTRORERR(errptr) \
+               (KA_VALID_KPTR(errptr) || KA_VALID_PTR_ERR(errptr))
+#define KA_HELD_GKL()  (current->lock_depth >= 0)
+
+/* The actual assert */
+#define KGDB_ASSERT(condition, message) do {                   \
+       if (!(condition) && (kgdb_enabled)) {                   \
+               KGDB_PRINTK("Assertion failed at %s:%d: %s\n",  \
+                                  __FILE__, __LINE__, message);\
+               BREAKPOINT();                                   \
+       }                                                       \
+} while (0)
+#else
+#define KGDB_ASSERT(condition, message)
+#endif
+
+#endif
diff --git a/include/asm-sh/kmap_types.h b/include/asm-sh/kmap_types.h
new file mode 100644
index 000000000000..2492ba07148f
--- /dev/null
+++ b/include/asm-sh/kmap_types.h
@@ -0,0 +1,33 @@
+#ifndef __SH_KMAP_TYPES_H
+#define __SH_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-sh/linkage.h b/include/asm-sh/linkage.h
new file mode 100644
index 000000000000..3565a4f4009f
--- /dev/null
+++ b/include/asm-sh/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 4
+#define __ALIGN_STR ".balign 4"
+
+#endif
diff --git a/include/asm-sh/local.h b/include/asm-sh/local.h
new file mode 100644
index 000000000000..9ed9b9cb459a
--- /dev/null
+++ b/include/asm-sh/local.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_LOCAL_H
+#define __ASM_SH_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_SH_LOCAL_H */
+
diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h
new file mode 100644
index 000000000000..5771f4baa478
--- /dev/null
+++ b/include/asm-sh/machvec.h
@@ -0,0 +1,73 @@
+/*
+ * include/asm-sh/machvec.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#ifndef _ASM_SH_MACHVEC_H
+#define _ASM_SH_MACHVEC_H 1
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/machtypes.h>
+#include <asm/machvec_init.h>
+
+struct device;
+struct timeval;
+
+struct sh_machine_vector
+{
+	int mv_nr_irqs;
+
+	unsigned char (*mv_inb)(unsigned long);
+	unsigned short (*mv_inw)(unsigned long);
+	unsigned int (*mv_inl)(unsigned long);
+	void (*mv_outb)(unsigned char, unsigned long);
+	void (*mv_outw)(unsigned short, unsigned long);
+	void (*mv_outl)(unsigned int, unsigned long);
+
+	unsigned char (*mv_inb_p)(unsigned long);
+	unsigned short (*mv_inw_p)(unsigned long);
+	unsigned int (*mv_inl_p)(unsigned long);
+	void (*mv_outb_p)(unsigned char, unsigned long);
+	void (*mv_outw_p)(unsigned short, unsigned long);
+	void (*mv_outl_p)(unsigned int, unsigned long);
+
+	void (*mv_insb)(unsigned long port, void *addr, unsigned long count);
+	void (*mv_insw)(unsigned long port, void *addr, unsigned long count);
+	void (*mv_insl)(unsigned long port, void *addr, unsigned long count);
+	void (*mv_outsb)(unsigned long port, const void *addr, unsigned long count);
+	void (*mv_outsw)(unsigned long port, const void *addr, unsigned long count);
+	void (*mv_outsl)(unsigned long port, const void *addr, unsigned long count);
+
+	unsigned char (*mv_readb)(unsigned long);
+	unsigned short (*mv_readw)(unsigned long);
+	unsigned int (*mv_readl)(unsigned long);
+	void (*mv_writeb)(unsigned char, unsigned long);
+	void (*mv_writew)(unsigned short, unsigned long);
+	void (*mv_writel)(unsigned int, unsigned long);
+
+	void* (*mv_ioremap)(unsigned long offset, unsigned long size);
+	void (*mv_iounmap)(void *addr);
+
+	unsigned long (*mv_isa_port2addr)(unsigned long offset);
+
+	int (*mv_irq_demux)(int irq);
+
+	void (*mv_init_irq)(void);
+	void (*mv_init_pci)(void);
+
+	void (*mv_heartbeat)(void);
+
+	void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, int);
+	int (*mv_consistent_free)(struct device *, size_t, void *, dma_addr_t);
+};
+
+extern struct sh_machine_vector sh_mv;
+
+#endif /* _ASM_SH_MACHVEC_H */
diff --git a/include/asm-sh/machvec_init.h b/include/asm-sh/machvec_init.h
new file mode 100644
index 000000000000..9e7de808f7f8
--- /dev/null
+++ b/include/asm-sh/machvec_init.h
@@ -0,0 +1,54 @@
+/*
+ * include/asm-sh/machvec_init.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file has goodies to help simplify instantiation of machine vectors.
+ */
+
+#ifndef __SH_MACHVEC_INIT_H
+#define __SH_MACHVEC_INIT_H
+
+#include <linux/config.h>
+
+/*
+ * In a GENERIC kernel, we have lots of these vectors floating about,
+ * all but one of which we want to go away.  In a non-GENERIC kernel,
+ * we want only one, ever.
+ *
+ * Accomplish this in the GENERIC kernel by puting all of the vectors
+ * in the .init.data section where they'll go away.  We'll copy the
+ * one we want to the real alpha_mv vector in setup_arch.
+ *
+ * Accomplish this in a non-GENERIC kernel by ifdef'ing out all but
+ * one of the vectors, which will not reside in .init.data.  We then
+ * alias this one vector to alpha_mv, so no copy is needed.
+ *
+ * Upshot: set __initdata to nothing for non-GENERIC kernels.
+ *
+ * Note we do the same thing for the UNKNOWN kernel, as we need to write
+ * to the machine vector while setting it up.
+ */
+
+#if defined(CONFIG_SH_GENERIC) || defined(CONFIG_SH_UNKNOWN)
+#define __initmv __attribute__((unused,__section__ (".machvec.init")))
+#define ALIAS_MV(x)
+#else
+#define __initmv
+
+/* GCC actually has a syntax for defining aliases, but is under some
+   delusion that you shouldn't be able to declare it extern somewhere
+   else beforehand.  Fine.  We'll do it ourselves.  */
+#if 0
+#define ALIAS_MV(system) \
+  struct sh_machine_vector sh_mv __attribute__((alias("mv_"#system)));
+#else
+#define ALIAS_MV(system) \
+  asm(".global sh_mv\nsh_mv = mv_"#system );
+#endif
+#endif /* GENERIC */
+
+#endif /* __SH_MACHVEC_INIT_H */
diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h
new file mode 100644
index 000000000000..1707cfb2915d
--- /dev/null
+++ b/include/asm-sh/mc146818rtc.h
@@ -0,0 +1,176 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#ifdef CONFIG_SH_MPC1211
+#undef  _ASM_MC146818RTC_H
+#undef  RTC_IRQ
+#include <asm/mpc1211/mc146818rtc.h>
+#else
+
+#include <asm/rtc.h>
+
+#define RTC_ALWAYS_BCD	1
+
+/* FIXME:RTC Interrupt feature is not implemented yet. */
+#undef  RTC_IRQ
+#define RTC_IRQ		0
+
+#if defined(CONFIG_CPU_SH3)
+#define RTC_PORT(n)		(R64CNT+(n)*2)
+#define CMOS_READ(addr)		__CMOS_READ(addr,b)
+#define CMOS_WRITE(val,addr)	__CMOS_WRITE(val,addr,b)
+
+#elif defined(CONFIG_SH_SECUREEDGE5410)
+#include <asm/snapgear/io.h>
+
+#define RTC_PORT(n)             SECUREEDGE_IOPORT_ADDR
+#define CMOS_READ(addr)         secureedge5410_cmos_read(addr)
+#define CMOS_WRITE(val,addr)    secureedge5410_cmos_write(val,addr)
+extern unsigned char secureedge5410_cmos_read(int addr);
+extern void secureedge5410_cmos_write(unsigned char val, int addr);
+
+#elif defined(CONFIG_CPU_SH4)
+#define RTC_PORT(n)		(R64CNT+(n)*4)
+#define CMOS_READ(addr)		__CMOS_READ(addr,w)
+#define CMOS_WRITE(val,addr)	__CMOS_WRITE(val,addr,w)
+#endif
+
+#define __CMOS_READ(addr, s) ({						\
+	unsigned char val=0, rcr1, rcr2, r64cnt, retry;			\
+	switch(addr) {							\
+		case RTC_SECONDS:					\
+			val = ctrl_inb(RSECCNT);			\
+			break;						\
+		case RTC_SECONDS_ALARM:					\
+			val = ctrl_inb(RSECAR);				\
+			break;						\
+		case RTC_MINUTES:					\
+			val = ctrl_inb(RMINCNT);			\
+			break;						\
+		case RTC_MINUTES_ALARM:					\
+			val = ctrl_inb(RMINAR);				\
+			break;						\
+		case RTC_HOURS:						\
+			val = ctrl_inb(RHRCNT);				\
+			break;						\
+		case RTC_HOURS_ALARM:					\
+			val = ctrl_inb(RHRAR);				\
+			break;						\
+		case RTC_DAY_OF_WEEK:					\
+			val = ctrl_inb(RWKCNT);				\
+			break;						\
+		case RTC_DAY_OF_MONTH:					\
+			val = ctrl_inb(RDAYCNT);			\
+			break;						\
+		case RTC_MONTH:						\
+			val = ctrl_inb(RMONCNT);			\
+			break;						\
+		case RTC_YEAR:						\
+			val = ctrl_in##s(RYRCNT);			\
+			break;						\
+		case RTC_REG_A: /* RTC_FREQ_SELECT */			\
+			rcr2 = ctrl_inb(RCR2);				\
+			val = (rcr2 & RCR2_PESMASK) >> 4;		\
+			rcr1 = ctrl_inb(RCR1);				\
+			rcr1 = (rcr1 & (RCR1_CIE | RCR1_AIE)) | RCR1_AF;\
+			retry = 0;					\
+			do {						\
+				ctrl_outb(rcr1, RCR1); /* clear CF */	\
+				r64cnt = ctrl_inb(R64CNT);		\
+			} while((ctrl_inb(RCR1) & RCR1_CF) && retry++ < 1000);\
+			r64cnt ^= RTC_BIT_INVERTED;			\
+			if(r64cnt == 0x7f || r64cnt == 0)		\
+				val |= RTC_UIP;				\
+			break;						\
+		case RTC_REG_B:	/* RTC_CONTROL */			\
+			rcr1 = ctrl_inb(RCR1);				\
+			rcr2 = ctrl_inb(RCR2);				\
+			if(rcr1 & RCR1_CIE)	val |= RTC_UIE;		\
+			if(rcr1 & RCR1_AIE)	val |= RTC_AIE;		\
+			if(rcr2 & RCR2_PESMASK)	val |= RTC_PIE;		\
+			if(!(rcr2 & RCR2_START))val |= RTC_SET;		\
+			val |= RTC_24H;					\
+			break;						\
+		case RTC_REG_C:	/* RTC_INTR_FLAGS */			\
+			rcr1 = ctrl_inb(RCR1);				\
+			rcr1 &= ~(RCR1_CF | RCR1_AF);			\
+			ctrl_outb(rcr1, RCR1);				\
+			rcr2 = ctrl_inb(RCR2);				\
+			rcr2 &= ~RCR2_PEF;				\
+			ctrl_outb(rcr2, RCR2);				\
+			break;						\
+		case RTC_REG_D:	/* RTC_VALID */				\
+			/* Always valid ... */				\
+			val = RTC_VRT;					\
+			break;						\
+		default:						\
+			break;						\
+	}								\
+	val;								\
+})
+
+#define __CMOS_WRITE(val, addr, s) ({					\
+	unsigned char rcr1,rcr2;					\
+	switch(addr) {							\
+		case RTC_SECONDS:					\
+			ctrl_outb(val, RSECCNT);			\
+			break;						\
+		case RTC_SECONDS_ALARM:					\
+			ctrl_outb(val, RSECAR);				\
+			break;						\
+		case RTC_MINUTES:					\
+			ctrl_outb(val, RMINCNT);			\
+			break;						\
+		case RTC_MINUTES_ALARM:					\
+			ctrl_outb(val, RMINAR);				\
+			break;						\
+		case RTC_HOURS:						\
+			ctrl_outb(val, RHRCNT);				\
+			break;						\
+		case RTC_HOURS_ALARM:					\
+			ctrl_outb(val, RHRAR);				\
+			break;						\
+		case RTC_DAY_OF_WEEK:					\
+			ctrl_outb(val, RWKCNT);				\
+			break;						\
+		case RTC_DAY_OF_MONTH:					\
+			ctrl_outb(val, RDAYCNT);			\
+			break;						\
+		case RTC_MONTH:						\
+			ctrl_outb(val, RMONCNT);			\
+			break;						\
+		case RTC_YEAR:						\
+			ctrl_out##s((ctrl_in##s(RYRCNT) & 0xff00) | (val & 0xff), RYRCNT);\
+			break;						\
+		case RTC_REG_A: /* RTC_FREQ_SELECT */			\
+			rcr2 = ctrl_inb(RCR2);				\
+			if((val & RTC_DIV_CTL) == RTC_DIV_RESET2)	\
+				rcr2 |= RCR2_RESET;			\
+			ctrl_outb(rcr2, RCR2);				\
+			break;						\
+		case RTC_REG_B:	/* RTC_CONTROL */			\
+			rcr1 = (ctrl_inb(RCR1) & 0x99) | RCR1_AF;	\
+			if(val & RTC_AIE) rcr1 |= RCR1_AIE;		\
+			else              rcr1 &= ~RCR1_AIE;		\
+			if(val & RTC_UIE) rcr1 |= RCR1_CIE;		\
+			else              rcr1 &= ~RCR1_CIE;		\
+			ctrl_outb(rcr1, RCR1);				\
+			rcr2 = ctrl_inb(RCR2);				\
+			if(val & RTC_SET) rcr2 &= ~RCR2_START;		\
+			else              rcr2 |= RCR2_START;		\
+			ctrl_outb(rcr2, RCR2);				\
+			break;						\
+		case RTC_REG_C:	/* RTC_INTR_FLAGS */			\
+			break;						\
+		case RTC_REG_D:	/* RTC_VALID */				\
+			break;						\
+		default:						\
+			break;						\
+	}								\
+})
+
+#endif /* CONFIG_SH_MPC1211 */
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-sh/microdev/io.h b/include/asm-sh/microdev/io.h
new file mode 100644
index 000000000000..f2ca4ac8c88a
--- /dev/null
+++ b/include/asm-sh/microdev/io.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-sh/io_microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * IO functions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ */
+
+
+#ifndef _ASM_SH_IO_MICRODEV_H
+#define _ASM_SH_IO_MICRODEV_H
+
+extern unsigned long microdev_isa_port2addr(unsigned long offset);
+
+extern unsigned char microdev_inb(unsigned long port);
+extern unsigned short microdev_inw(unsigned long port);
+extern unsigned int microdev_inl(unsigned long port);
+
+extern void microdev_outb(unsigned char value, unsigned long port);
+extern void microdev_outw(unsigned short value, unsigned long port);
+extern void microdev_outl(unsigned int value, unsigned long port);
+
+extern unsigned char microdev_inb_p(unsigned long port);
+extern unsigned short microdev_inw_p(unsigned long port);
+extern unsigned int microdev_inl_p(unsigned long port);
+
+extern void microdev_outb_p(unsigned char value, unsigned long port);
+extern void microdev_outw_p(unsigned short value, unsigned long port);
+extern void microdev_outl_p(unsigned int value, unsigned long port);
+
+extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
+extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
+extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
+
+extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
+
+#if defined(CONFIG_PCI)
+extern unsigned char  microdev_pci_inb(unsigned long port);
+extern unsigned short microdev_pci_inw(unsigned long port);
+extern unsigned long  microdev_pci_inl(unsigned long port);
+extern void           microdev_pci_outb(unsigned char  data, unsigned long port);
+extern void           microdev_pci_outw(unsigned short data, unsigned long port);
+extern void           microdev_pci_outl(unsigned long  data, unsigned long port);
+#endif
+
+#endif /* _ASM_SH_IO_MICRODEV_H */
+
diff --git a/include/asm-sh/microdev/irq.h b/include/asm-sh/microdev/irq.h
new file mode 100644
index 000000000000..47f6f77a65f0
--- /dev/null
+++ b/include/asm-sh/microdev/irq.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/asm-sh/irq_microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * IRQ functions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ */
+
+
+#ifndef _ASM_SH_IRQ_MICRODEV_H
+#define _ASM_SH_IRQ_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+
+	/*
+	 *	The following are useful macros for manipulating the
+	 *	interrupt controller (INTC) on the CPU-board FPGA.
+	 *	It should be noted that there is an INTC on the FPGA,
+	 *	and a seperate INTC on the SH4-202 core - these are
+	 *	two different things, both of which need to be prorammed
+	 *	to correctly route - unfortunately, they have the
+	 *	same name and abbreviations!
+	 */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+	/*
+	 *	The following are the IRQ numbers for the Linux Kernel for external interrupts.
+	 *	i.e. the numbers seen by 'cat /proc/interrupt'.
+	 */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+	/*
+	 *	The following are the IRQ numbers for the INTC on the FPGA for external interrupts.
+	 *	i.e. the bits in the INTC registers in the FPGA.
+	 */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#endif /* _ASM_SH_IRQ_MICRODEV_H */
diff --git a/include/asm-sh/mman.h b/include/asm-sh/mman.h
new file mode 100644
index 000000000000..3ebab5f79db7
--- /dev/null
+++ b/include/asm-sh/mman.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_SH_MMAN_H
+#define __ASM_SH_MMAN_H
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __ASM_SH_MMAN_H */
diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h
new file mode 100644
index 000000000000..72f07be6117f
--- /dev/null
+++ b/include/asm-sh/mmu.h
@@ -0,0 +1,29 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#if !defined(CONFIG_MMU)
+
+struct mm_rblock_struct {
+	int	size;
+	int	refcount;
+	void	*kblock;
+};
+
+struct mm_tblock_struct {
+	struct mm_rblock_struct *rblock;
+	struct mm_tblock_struct *next;
+};
+
+typedef struct {
+	struct mm_tblock_struct tblock;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#else
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif /* CONFIG_MMU */
+#endif /* __MMH_H */
+
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
new file mode 100644
index 000000000000..6760d064bd02
--- /dev/null
+++ b/include/asm-sh/mmu_context.h
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+
+/*
+ * Cache of MMU context last used.
+ */
+extern unsigned long mmu_context_cache;
+
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100
+#define NO_CONTEXT			0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID			0x100
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+#ifdef CONFIG_MMU
+/*
+ * Get MMU context if needed.
+ */
+static __inline__ void
+get_mmu_context(struct mm_struct *mm)
+{
+	extern void flush_tlb_all(void);
+	unsigned long mc = mmu_context_cache;
+
+	/* Check if we have old version of context. */
+	if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version. */
+	mc = ++mmu_context_cache;
+	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We exhaust ASID of this version.
+		 * Flush all TLB and start new cycle.
+		 */
+		flush_tlb_all();
+		/*
+		 * Fix version; Note that we avoid version #0
+		 * to distingush NO_CONTEXT.
+		 */
+		if (!mc)
+			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm->context = mc;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static __inline__ int init_new_context(struct task_struct *tsk,
+				       struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static __inline__ void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+static __inline__ void set_asid(unsigned long asid)
+{
+	unsigned long __dummy;
+
+	__asm__ __volatile__ ("mov.l	%2, %0\n\t"
+			      "and	%3, %0\n\t"
+			      "or	%1, %0\n\t"
+			      "mov.l	%0, %2"
+			      : "=&r" (__dummy)
+			      : "r" (asid), "m" (__m(MMU_PTEH)),
+			        "r" (0xffffff00));
+}
+
+static __inline__ unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	__asm__ __volatile__ ("mov.l	%1, %0"
+			      : "=r" (asid)
+			      : "m" (__m(MMU_PTEH)));
+	asid &= MMU_CONTEXT_ASID_MASK;
+	return asid;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static __inline__ void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
+}
+
+/* MMU_TTB can be used for optimizing the fault handling.
+   (Currently not used) */
+static __inline__ void switch_mm(struct mm_struct *prev,
+				 struct mm_struct *next,
+				 struct task_struct *tsk)
+{
+	if (likely(prev != next)) {
+		unsigned long __pgdir = (unsigned long)next->pgd;
+
+		__asm__ __volatile__("mov.l	%0, %1"
+				     : /* no output */
+				     : "r" (__pgdir), "m" (__m(MMU_TTB)));
+		activate_context(next);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev, next) \
+	switch_mm((prev),(next),NULL)
+
+static __inline__ void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+#else /* !CONFIG_MMU */
+#define get_mmu_context(mm)		do { } while (0)
+#define init_new_context(tsk,mm)	(0)
+#define destroy_context(mm)		do { } while (0)
+#define set_asid(asid)			do { } while (0)
+#define get_asid()			(0)
+#define activate_context(mm)		do { } while (0)
+#define switch_mm(prev,next,tsk)	do { } while (0)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define activate_mm(prev,next)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+	/* Enable MMU */
+	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+
+	/* The manual suggests doing some nops after turning on the MMU */
+	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t");
+
+	if (mmu_context_cache == NO_CONTEXT)
+		mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	unsigned long cr;
+
+	cr = ctrl_inl(MMUCR);
+	cr &= ~MMU_CONTROL_INIT;
+	ctrl_outl(cr, MMUCR);
+	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t");
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()	do { BUG(); } while (0)
+#define disable_mmu()	do { BUG(); } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h
new file mode 100644
index 000000000000..0e7406601fdf
--- /dev/null
+++ b/include/asm-sh/mmzone.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/asm-sh/mmzone.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SH_MMZONE_H
+#define __ASM_SH_MMZONE_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/* Currently, just for HP690 */
+#define PHYSADDR_TO_NID(phys)	((((phys) - __MEMORY_START) >= 0x01000000)?1:0)
+
+extern pg_data_t discontig_page_data[MAX_NUMNODES];
+extern bootmem_data_t discontig_node_bdata[MAX_NUMNODES];
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(kaddr)	PHYSADDR_TO_NID(__pa(kaddr))
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(&discontig_page_data[nid])
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#define phys_to_page(phys)						\
+({ unsigned int node = PHYSADDR_TO_NID(phys); 		      		\
+   NODE_MEM_MAP(node)				 		 	\
+     + (((phys) - NODE_DATA(node)->node_start_paddr) >> PAGE_SHIFT); })
+
+static inline int is_valid_page(struct page *page)
+{
+	unsigned int i;
+
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		if (page >= NODE_MEM_MAP(i) &&
+		    page < NODE_MEM_MAP(i) + NODE_DATA(i)->node_size)
+			return 1;
+	}
+	return 0;
+}
+
+#define VALID_PAGE(page)	is_valid_page(page)
+#define page_to_phys(page)	PHYSADDR(page_address(page))
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif
diff --git a/include/asm-sh/module.h b/include/asm-sh/module.h
new file mode 100644
index 000000000000..118d5a2b228f
--- /dev/null
+++ b/include/asm-sh/module.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_SH_MODULE_H
+#define _ASM_SH_MODULE_H
+
+/*
+ * This file contains the SH architecture specific module code.
+ */
+
+struct mod_arch_specific {
+	/* Nothing to see here .. */
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_SH_MODULE_H */
diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h
new file mode 100644
index 000000000000..0a2fdab3e454
--- /dev/null
+++ b/include/asm-sh/mpc1211/dma.h
@@ -0,0 +1,304 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_MPC1211_DMA_H
+#define _ASM_MPC1211_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <asm/io.h>		/* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x10000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb( pagenr       & 0xff, DMA_PAGE_0);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
+			break;
+		case 1:
+			dma_outb( pagenr       & 0xff, DMA_PAGE_1);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
+			break;
+		case 2:
+			dma_outb( pagenr       & 0xff, DMA_PAGE_2);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
+			break;
+		case 3:
+			dma_outb( pagenr       & 0xff, DMA_PAGE_3);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
+			break;
+		case 5:
+			dma_outb( pagenr       & 0xfe, DMA_PAGE_5);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
+			break;
+		case 6:
+			dma_outb( pagenr       & 0xfe, DMA_PAGE_6);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
+			break;
+		case 7:
+			dma_outb( pagenr       & 0xfe, DMA_PAGE_7);
+			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
+			break;
+       	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_MPC1211_DMA_H */
diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h
new file mode 100644
index 000000000000..eba8a0b5fd7b
--- /dev/null
+++ b/include/asm-sh/mpc1211/io.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/io_mpc1211.h
+ *
+ * Copyright 2001 Saito.K & Jeanne
+ *
+ * IO functions for an Interface MPC-1211
+ */
+
+#ifndef _ASM_SH_IO_MPC1211_H
+#define _ASM_SH_IO_MPC1211_H
+
+#include <linux/time.h>
+
+extern int mpc1211_irq_demux(int irq);
+
+extern void init_mpc1211_IRQ(void);
+extern void heartbeat_mpc1211(void);
+
+extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
+extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
+
+#endif /* _ASM_SH_IO_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h
new file mode 100644
index 000000000000..5f0b9088c796
--- /dev/null
+++ b/include/asm-sh/mpc1211/keyboard.h
@@ -0,0 +1,64 @@
+/*
+ *  MPC1211 specific keybord definitions
+ *  Taken from the old asm-i386/keybord.h for PC/AT-style definitions
+ *  created 3 Nov 1996 by Geert Uytterhoeven.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/kd.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+#define KEYBOARD_IRQ			1
+#define DISABLE_KBD_DURING_INTERRUPTS	0
+
+extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int pckbd_getkeycode(unsigned int scancode);
+extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
+			   char raw_mode);
+extern char pckbd_unexpected_up(unsigned char keycode);
+extern void pckbd_leds(unsigned char leds);
+extern void pckbd_init_hw(void);
+extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
+extern pm_callback pm_kbd_request_override;
+extern unsigned char pckbd_sysrq_xlate[128];
+
+#define kbd_setkeycode		pckbd_setkeycode
+#define kbd_getkeycode		pckbd_getkeycode
+#define kbd_translate		pckbd_translate
+#define kbd_unexpected_up	pckbd_unexpected_up
+#define kbd_leds		pckbd_leds
+#define kbd_init_hw		pckbd_init_hw
+#define kbd_sysrq_xlate		pckbd_sysrq_xlate
+
+#define SYSRQ_KEY 0x54
+
+/* resource allocation */
+#define kbd_request_region()
+#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
+                                             "keyboard", NULL)
+
+/* How to access the keyboard macros on this platform.  */
+#define kbd_read_input() inb(KBD_DATA_REG)
+#define kbd_read_status() inb(KBD_STATUS_REG)
+#define kbd_write_output(val) outb(val, KBD_DATA_REG)
+#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
+
+/* Some stoneage hardware needs delays after some operations.  */
+#define kbd_pause() do { } while(0)
+
+/*
+ * Machine specific bits for the PS/2 driver
+ */
+
+#define AUX_IRQ 12
+
+#define aux_request_irq(hand, dev_id)					\
+	request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+
+#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h
new file mode 100644
index 000000000000..c95d13236c3b
--- /dev/null
+++ b/include/asm-sh/mpc1211/m1543c.h
@@ -0,0 +1,200 @@
+#ifndef __ASM_SH_M1543C_H
+#define __ASM_SH_M1543C_H
+
+/*
+ * linux/include/asm-sh/m1543c.h
+ * Copyright (C) 2001  Nobuhiro Sakawa
+ * M1543C:PCI-ISA Bus Bridge with Super IO Chip support
+ *
+ * from
+ *
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define COM3_PRIMARY_BASE	0x3e8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+#define I8259_M_CR		0x20
+#define I8259_M_MR		0x21
+#define I8259_S_CR		0xa0
+#define I8259_S_MR		0xa1
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_COM3		11
+#define LDN_RTC			6
+#define LDN_KBC			7
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER1		0x51
+#define CONFIG_ENTER2		0x23
+#define CONFIG_EXIT		0xbb
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define PS2_IRQ_INDEX		0x72
+#define DMA_SELECT_INDEX	0x74
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_M1543C_H */
diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h
new file mode 100644
index 000000000000..0ec78f66cea4
--- /dev/null
+++ b/include/asm-sh/mpc1211/mc146818rtc.h
@@ -0,0 +1,6 @@
+/*
+ * MPC1211 uses PC/AT style RTC definitions.
+ */
+#include <asm-i386/mc146818rtc.h>
+
+
diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h
new file mode 100644
index 000000000000..fa456c3e4e01
--- /dev/null
+++ b/include/asm-sh/mpc1211/mpc1211.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_MPC1211_H
+#define __ASM_SH_MPC1211_H
+
+/*
+ * linux/include/asm-sh/mpc1211.h
+ *
+ * Copyright (C) 2001  Saito.K & Jeanne
+ *
+ * Interface MPC-1211 support
+ */
+
+#define PA_PCI_IO       (0xa4000000)    /* PCI I/O space */
+#define PA_PCI_MEM      (0xb0000000)    /* PCI MEM space */
+
+#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
+
+#endif  /* __ASM_SH_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h
new file mode 100644
index 000000000000..5d3712c3a701
--- /dev/null
+++ b/include/asm-sh/mpc1211/pci.h
@@ -0,0 +1,40 @@
+/*
+ *	Low-Level PCI Support for MPC-1211
+ *
+ *      (c) 2002 Saito.K & Jeanne
+ *
+ */
+
+#ifndef _PCI_MPC1211_H_
+#define _PCI_MPC1211_H_
+
+#include <linux/pci.h>
+
+/* set debug level 4=verbose...1=terse */
+//#define DEBUG_PCI 3
+#undef DEBUG_PCI
+
+#ifdef DEBUG_PCI
+#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
+#else
+#define PCIDBG(n, x...)
+#endif
+
+/* startup values */
+#define PCI_PROBE_BIOS    1
+#define PCI_PROBE_CONF1   2
+#define PCI_PROBE_CONF2   4
+#define PCI_NO_SORT       0x100
+#define PCI_BIOS_SORT     0x200
+#define PCI_NO_CHECKS     0x400
+#define PCI_ASSIGN_ROMS   0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+/* MPC-1211 Specific Values */
+#define PCIPAR            (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR            (0xa4000cfc)    /* PCI Config data    */
+
+#define PA_PCI_IO         (0xa4000000)    /* PCI I/O space */
+#define PA_PCI_MEM        (0xb0000000)    /* PCI MEM space */
+
+#endif /* _PCI_MPC1211_H_ */
diff --git a/include/asm-sh/msgbuf.h b/include/asm-sh/msgbuf.h
new file mode 100644
index 000000000000..517432343fb5
--- /dev/null
+++ b/include/asm-sh/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_MSGBUF_H
+#define __ASM_SH_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_SH_MSGBUF_H */
diff --git a/include/asm-sh/namei.h b/include/asm-sh/namei.h
new file mode 100644
index 000000000000..338a5d947143
--- /dev/null
+++ b/include/asm-sh/namei.h
@@ -0,0 +1,17 @@
+/* $Id: namei.h,v 1.3 2000/07/04 06:24:49 gniibe Exp $
+ * linux/include/asm-sh/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ASM_SH_NAMEI_H
+#define __ASM_SH_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __ASM_SH_NAMEI_H */
diff --git a/include/asm-sh/numnodes.h b/include/asm-sh/numnodes.h
new file mode 100644
index 000000000000..f73e85b72ecb
--- /dev/null
+++ b/include/asm-sh/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+/* Max 2 Nodes */
+#define NODES_SHIFT	1
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-sh/overdrive/fpga.h b/include/asm-sh/overdrive/fpga.h
new file mode 100644
index 000000000000..1cd87992c124
--- /dev/null
+++ b/include/asm-sh/overdrive/fpga.h
@@ -0,0 +1,15 @@
+/* 
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.                            
+ *
+ */
+
+#ifndef __FPGA_OD_H__
+#define __FPGA_OD_H__
+
+/* This routine will program up the fpga which interfaces to the galileo */
+int init_overdrive_fpga(void);
+
+#endif
diff --git a/include/asm-sh/overdrive/gt64111.h b/include/asm-sh/overdrive/gt64111.h
new file mode 100644
index 000000000000..01d58bc13a44
--- /dev/null
+++ b/include/asm-sh/overdrive/gt64111.h
@@ -0,0 +1,109 @@
+#ifndef _GT64111_H_
+#define _GT64111_H_
+
+#define MASTER_INTERFACE         0x0
+#define RAS10_LO_DEC_ADR         0x8        
+#define RAS10_HI_DEC_ADR         0x10
+#define RAS32_LO_DEC_ADR         0x18
+#define RAS32_HI_DEC_ADR         0x20
+#define CS20_LO_DEC_ADR          0x28
+#define CS20_HI_DEC_ADR          0x30
+#define CS3_LO_DEC_ADR           0x38
+#define CS3_HI_DEC_ADR           0x40
+#define PCI_IO_LO_DEC_ADR        0x48
+#define PCI_IO_HI_DEC_ADR        0x50
+#define PCI_MEM0_LO_DEC_ADR      0x58
+#define PCI_MEM0_HI_DEC_ADR      0x60
+#define INTERNAL_SPACE_DEC       0x68
+#define BUS_ERR_ADR_LO_CPU       0x70
+#define READONLY0                0x78
+#define PCI_MEM1_LO_DEC_ADR      0x80
+#define PCI_MEM1_HI_DEC_ADR      0x88
+#define RAS0_LO_DEC_ADR          0x400   
+#define RAS0_HI_DEC_ADR          0x404
+#define RAS1_LO_DEC_ADR          0x408
+#define RAS1_HI_DEC_ADR          0x40c
+#define RAS2_LO_DEC_ADR          0x410
+#define RAS2_HI_DEC_ADR          0x414
+#define RAS3_LO_DEC_ADR          0x418
+#define RAS3_HI_DEC_ADR          0x41c
+#define DEV_CS0_LO_DEC_ADR       0x420
+#define DEV_CS0_HI_DEC_ADR       0x424
+#define DEV_CS1_LO_DEC_ADR       0x428
+#define DEV_CS1_HI_DEC_ADR       0x42c
+#define DEV_CS2_LO_DEC_ADR       0x430
+#define DEV_CS2_HI_DEC_ADR       0x434
+#define DEV_CS3_LO_DEC_ADR       0x438
+#define DEV_CS3_HI_DEC_ADR       0x43c
+#define DEV_BOOTCS_LO_DEC_ADR    0x440
+#define DEV_BOOTCS_HI_DEC_ADR    0x444
+#define DEV_ADR_DEC_ERR          0x470
+#define DRAM_CFG                 0x448   
+#define DRAM_BANK0_PARMS         0x44c   
+#define DRAM_BANK1_PARMS         0x450
+#define DRAM_BANK2_PARMS         0x454
+#define DRAM_BANK3_PARMS         0x458
+#define DEV_BANK0_PARMS          0x45c
+#define DEV_BANK1_PARMS          0x460
+#define DEV_BANK2_PARMS          0x464
+#define DEV_BANK3_PARMS          0x468
+#define DEV_BOOT_BANK_PARMS      0x46c
+#define CH0_DMA_BYTECOUNT        0x800
+#define CH1_DMA_BYTECOUNT        0x804
+#define CH2_DMA_BYTECOUNT        0x808
+#define CH3_DMA_BYTECOUNT        0x80c
+#define CH0_DMA_SRC_ADR          0x810
+#define CH1_DMA_SRC_ADR          0x814
+#define CH2_DMA_SRC_ADR          0x818
+#define CH3_DMA_SRC_ADR          0x81c
+#define CH0_DMA_DST_ADR          0x820
+#define CH1_DMA_DST_ADR          0x824
+#define CH2_DMA_DST_ADR          0x828
+#define CH3_DMA_DST_ADR          0x82c
+#define CH0_NEXT_REC_PTR         0x830
+#define CH1_NEXT_REC_PTR         0x834
+#define CH2_NEXT_REC_PTR         0x838
+#define CH3_NEXT_REC_PTR         0x83c
+#define CH0_CTRL                 0x840
+#define CH1_CTRL                 0x844
+#define CH2_CTRL                 0x848
+#define CH3_CTRL                 0x84c
+#define DMA_ARBITER              0x860
+#define TIMER0                   0x850
+#define TIMER1                   0x854
+#define TIMER2                   0x858
+#define TIMER3                   0x85c
+#define TIMER_CTRL               0x864
+#define PCI_CMD                  0xc00
+#define PCI_TIMEOUT              0xc04
+#define PCI_RAS10_BANK_SIZE      0xc08
+#define PCI_RAS32_BANK_SIZE      0xc0c
+#define PCI_CS20_BANK_SIZE       0xc10
+#define PCI_CS3_BANK_SIZE        0xc14
+#define PCI_SERRMASK             0xc28
+#define PCI_INTACK               0xc34
+#define PCI_BAR_EN               0xc3c
+#define PCI_CFG_ADR              0xcf8
+#define PCI_CFG_DATA             0xcfc
+#define PCI_INTCAUSE             0xc18
+#define PCI_MAST_MASK            0xc1c
+#define PCI_PCIMASK              0xc24
+#define BAR_ENABLE_ADR           0xc3c
+
+/* These are config registers, accessible via PCI space */
+#define PCI_CONFIG_RAS10_BASE_ADR   0x010
+#define PCI_CONFIG_RAS32_BASE_ADR   0x014
+#define PCI_CONFIG_CS20_BASE_ADR    0x018
+#define PCI_CONFIG_CS3_BASE_ADR     0x01c
+#define PCI_CONFIG_INT_REG_MM_ADR   0x020
+#define PCI_CONFIG_INT_REG_IO_ADR   0x024
+#define PCI_CONFIG_BOARD_VENDOR     0x02c
+#define PCI_CONFIG_ROM_ADR          0x030
+#define PCI_CONFIG_INT_PIN_LINE     0x03c
+
+
+
+
+
+#endif
+
diff --git a/include/asm-sh/overdrive/io.h b/include/asm-sh/overdrive/io.h
new file mode 100644
index 000000000000..0dba700e9643
--- /dev/null
+++ b/include/asm-sh/overdrive/io.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-sh/io_od.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an STMicroelectronics Overdrive
+ */
+
+#ifndef _ASM_SH_IO_OD_H
+#define _ASM_SH_IO_OD_H
+
+extern unsigned char od_inb(unsigned long port);
+extern unsigned short od_inw(unsigned long port);
+extern unsigned int od_inl(unsigned long port);
+
+extern void od_outb(unsigned char value, unsigned long port);
+extern void od_outw(unsigned short value, unsigned long port);
+extern void od_outl(unsigned int value, unsigned long port);
+
+extern unsigned char od_inb_p(unsigned long port);
+extern unsigned short od_inw_p(unsigned long port);
+extern unsigned int od_inl_p(unsigned long port);
+extern void od_outb_p(unsigned char value, unsigned long port);
+extern void od_outw_p(unsigned short value, unsigned long port);
+extern void od_outl_p(unsigned int value, unsigned long port);
+
+extern void od_insb(unsigned long port, void *addr, unsigned long count);
+extern void od_insw(unsigned long port, void *addr, unsigned long count);
+extern void od_insl(unsigned long port, void *addr, unsigned long count);
+extern void od_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void od_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void od_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long od_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_OD_H */
diff --git a/include/asm-sh/overdrive/overdrive.h b/include/asm-sh/overdrive/overdrive.h
new file mode 100644
index 000000000000..aa62ae68c55c
--- /dev/null
+++ b/include/asm-sh/overdrive/overdrive.h
@@ -0,0 +1,89 @@
+/* 
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.                            
+ *
+ */
+
+#include <linux/config.h>
+
+#ifndef __OVERDRIVE_H__
+#define __OVERDRIVE_H__
+
+#define OVERDRIVE_INT_CT 0xa3a00000
+#define OVERDRIVE_INT_DT 0xa3b00000
+
+#define OVERDRIVE_CTRL    0xa3000000
+
+/* Shoving all these bits into the same register is not a good idea. 
+ * As soon as I get a spare moment, I'll change the FPGA and put each 
+ * bit in a separate register
+ */
+
+#define VALID_CTRL_BITS		          0x1f
+
+#define ENABLE_RS232_MASK	  	  0x1e
+#define DISABLE_RS232_BIT		  0x01
+
+#define ENABLE_NMI_MASK			  0x1d
+#define DISABLE_NMI_BIT			  0x02
+
+#define RESET_PCI_MASK			  0x1b
+#define ENABLE_PCI_BIT			  0x04
+
+#define ENABLE_LED_MASK			  0x17
+#define DISABLE_LED_BIT			  0x08
+
+#define RESET_FPGA_MASK			  0x0f
+#define ENABLE_FPGA_BIT			  0x10
+
+
+#define FPGA_DCLK_ADDRESS           0xA3C00000
+
+#define FPGA_DATA        0x01	/*   W */
+#define FPGA_CONFDONE    0x02	/* R   */
+#define FPGA_NOT_STATUS  0x04	/* R   */
+#define FPGA_INITDONE    0x08	/* R   */
+
+#define FPGA_TIMEOUT     100000
+
+
+/* Interrupts for the overdrive. Note that these numbers have 
+ * nothing to do with the actual IRQ numbers they appear on, 
+ * this is all programmable. This is simply the position in the 
+ * INT_CT register.
+ */
+
+#define OVERDRIVE_PCI_INTA              0
+#define OVERDRIVE_PCI_INTB              1
+#define OVERDRIVE_PCI_INTC              2
+#define OVERDRIVE_PCI_INTD              3
+#define OVERDRIVE_GALILEO_INT           4
+#define OVERDRIVE_GALILEO_LOCAL_INT     5
+#define OVERDRIVE_AUDIO_INT             6
+#define OVERDRIVE_KEYBOARD_INT          7
+
+/* Which Linux IRQ should we assign to each interrupt source? */
+#define OVERDRIVE_PCI_IRQ1              2
+#ifdef CONFIG_HACKED_NE2K
+#define OVERDRIVE_PCI_IRQ2              7
+#else
+#define OVERDRIVE_PCI_IRQ2              2
+#undef OVERDRIVE_PCI_INTB 
+#define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA
+
+#endif
+
+/* Put the ESS solo audio chip on IRQ 4 */
+#define OVERDRIVE_ESS_IRQ               4
+
+/* Where the memory behind the PCI bus appears */
+#define PCI_DRAM_BASE   0xb7000000
+#define PCI_DRAM_SIZE (16*1024*1024)
+#define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1)
+
+/* Where the IO region appears in the memory */
+#define PCI_GTIO_BASE   0xb8000000
+
+#endif
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
new file mode 100644
index 000000000000..4c6d129e7d91
--- /dev/null
+++ b/include/asm-sh/page.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+   [ P0/U0 (virtual) ]		0x00000000     <------ User space
+   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
+   [ P4 control   ]		0xE0000000
+ */
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern void (*clear_page)(void *to);
+extern void (*copy_page)(void *to, void *from);
+
+extern void clear_page_slow(void *to);
+extern void copy_page_slow(void *to, void *from);
+
+#if defined(CONFIG_SH7705_CACHE_32KB) && defined(CONFIG_MMU)
+struct page;
+extern void clear_user_page(void *to, unsigned long address, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
+extern void __clear_user_page(void *to, void *orig_to);
+extern void __copy_user_page(void *to, void *from, void *orig_to);
+#elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU)
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#elif defined(CONFIG_CPU_SH4)
+struct page;
+extern void clear_user_page(void *to, unsigned long address, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
+extern void __clear_user_page(void *to, void *orig_to);
+extern void __copy_user_page(void *to, void *from, void *orig_to);
+#endif
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/*
+ * IF YOU CHANGE THIS, PLEASE ALSO CHANGE
+ *
+ *	arch/sh/kernel/vmlinux.lds.S
+ *
+ * which has the same constant encoded..
+ */
+
+#define __MEMORY_START		CONFIG_MEMORY_START
+#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
+#ifdef CONFIG_DISCONTIGMEM
+/* Just for HP690, for now.. */
+#define __MEMORY_START_2ND	(__MEMORY_START+0x02000000)
+#define __MEMORY_SIZE_2ND	0x001000000 /* 16MB */
+#endif
+
+#define PAGE_OFFSET		(0x80000000UL)
+#define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+
+#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+
+#ifndef CONFIG_DISCONTIGMEM
+#define phys_to_page(phys)	(mem_map + (((phys)-__MEMORY_START) >> PAGE_SHIFT))
+#define page_to_phys(page)	(((page - mem_map) << PAGE_SHIFT) + __MEMORY_START)
+#endif
+
+/* PFN start number, because of __MEMORY_START */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+
+#define pfn_to_page(pfn)	(mem_map + (pfn) - PFN_START)
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_valid(pfn)		(((pfn) - PFN_START) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h
new file mode 100644
index 000000000000..ce13064fec21
--- /dev/null
+++ b/include/asm-sh/param.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_PARAM_H
+#define __ASM_SH_PARAM_H
+
+#ifdef __KERNEL__
+# ifdef CONFIG_SH_WDT
+#  define HZ		1000		/* Needed for high-res WOVF */
+# else
+#  define HZ		100
+# endif
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_SH_PARAM_H */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
new file mode 100644
index 000000000000..9c3b63d0105e
--- /dev/null
+++ b/include/asm-sh/pci.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SH_PCI_H
+#define __ASM_SH_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * A board can define one or more PCI channels that represent built-in (or
+ * external) PCI controllers.
+ */
+struct pci_channel {
+	struct pci_ops *pci_ops;
+	struct resource *io_resource;
+	struct resource *mem_resource;
+	int first_devfn;
+	int last_devfn;
+};
+
+/*
+ * Each board initializes this array and terminates it with a NULL entry.
+ */
+extern struct pci_channel board_pci_channels[];
+
+#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
+#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
+
+struct pci_dev;
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+/* pci_unmap_{single,page} being a nop depends upon the
+ * configuration.
+ */
+#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+#else
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+#endif
+
+/* Not supporting more than 32-bit PCI bus addresses now, but
+ * must satisfy references to this function.  Change if needed.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	(virt_to_bus((sg)->dma_address))
+#define sg_dma_len(sg)		((sg)->length)
+
+/* Board-specific fixup routines. */
+extern void pcibios_fixup(void);
+extern void pcibios_fixup_irqs(void);
+
+#ifdef CONFIG_PCI_AUTO
+extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#endif
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* generic DMA-mapping stuff */
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_SH_PCI_H */
+
diff --git a/include/asm-sh/percpu.h b/include/asm-sh/percpu.h
new file mode 100644
index 000000000000..4db4b39a4399
--- /dev/null
+++ b/include/asm-sh/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SH_PERCPU
+#define __ARCH_SH_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SH_PERCPU */
diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h
new file mode 100644
index 000000000000..f4f233f7a4f5
--- /dev/null
+++ b/include/asm-sh/pgalloc.h
@@ -0,0 +1,88 @@
+#ifndef __ASM_SH_PGALLOC_H
+#define __ASM_SH_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+
+#define pgd_quicklist ((unsigned long *)0)
+#define pmd_quicklist ((unsigned long *)0)
+#define pte_quicklist ((unsigned long *)0)
+#define pgtable_cache_size 0L
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t));
+	pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL);
+
+	if (pgd)
+		memset(pgd, 0, pgd_size);
+
+	return pgd;
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+	kfree(pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+					 unsigned long address)
+{
+	struct page *pte;
+
+   	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+
+	return pte;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+#define check_pgt_cache()		do { } while (0)
+
+#ifdef CONFIG_CPU_SH4
+#define PG_mapped			PG_arch_1
+#endif
+
+#endif /* __ASM_SH_PGALLOC_H */
diff --git a/include/asm-sh/pgtable-2level.h b/include/asm-sh/pgtable-2level.h
new file mode 100644
index 000000000000..b0528aa3cb1f
--- /dev/null
+++ b/include/asm-sh/pgtable-2level.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_PGTABLE_2LEVEL_H
+#define __ASM_SH_PGTABLE_2LEVEL_H
+
+/*
+ * traditional two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * this is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+#define PMD_SHIFT	22
+#define PTRS_PER_PMD	1
+
+#define PTRS_PER_PTE	1024
+
+#ifndef __ASSEMBLY__
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear (pgd_t * pgdp) 	{ }
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
+
+#define pgd_page(pgd) \
+((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
new file mode 100644
index 000000000000..8a9689d5366f
--- /dev/null
+++ b/include/asm-sh/pgtable.h
@@ -0,0 +1,306 @@
+#ifndef __ASM_SH_PGTABLE_H
+#define __ASM_SH_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ */
+
+#include <linux/config.h>
+#include <asm/pgtable-2level.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the SuperH page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/addrspace.h>
+#include <asm/fixmap.h>
+#include <linux/threads.h>
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+
+/*
+ * Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386.
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define PTE_PHYS_MASK	0x1ffff000
+
+#ifndef __ASSEMBLY__
+/*
+ * First 1MB map is used by fixed purpose.
+ * Currently only 4-enty (16kB) is used (see arch/sh/mm/cache.c)
+ */
+#define VMALLOC_START	(P3SEG+0x00100000)
+#define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+
+#define	_PAGE_WT	0x001  /* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED	0x002  /* SH-bit  : page is shared among processes */
+#define _PAGE_DIRTY	0x004  /* D-bit   : page changed */
+#define _PAGE_CACHABLE	0x008  /* C-bit   : cachable */
+#define _PAGE_SZ0	0x010  /* SZ0-bit : Size of page */
+#define _PAGE_RW	0x020  /* PR0-bit : write access allowed */
+#define _PAGE_USER	0x040  /* PR1-bit : user space access allowed */
+#define _PAGE_SZ1	0x080  /* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT	0x100  /* V-bit   : page is valid */
+#define _PAGE_PROTNONE	0x200  /* software: if not present  */
+#define _PAGE_ACCESSED 	0x400  /* software: page referenced */
+#define _PAGE_U0_SHARED 0x800  /* software: page is shared in user space */
+
+#define	_PAGE_FILE	_PAGE_WT  /* software: pagecache or swap? */
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
+
+
+/* Mask which drop software flags
+ * We also drop WT bit since it is used for _PAGE_FILE
+ * bit in this implementation.
+ */
+#define _PAGE_CLEAR_FLAGS	(_PAGE_WT | _PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_U0_SHARED)
+
+#if defined(CONFIG_CPU_SH3)
+/*
+ * MMU on SH-3 has bug on SH-bit: We can't use it if MMUCR.IX=1.
+ * Work around: Just drop SH-bit.
+ */
+#define _PAGE_FLAGS_HARDWARE_MASK	(0x1fffffff & ~(_PAGE_CLEAR_FLAGS | _PAGE_HW_SHARED))
+#else
+#define _PAGE_FLAGS_HARDWARE_MASK	(0x1fffffff & ~(_PAGE_CLEAR_FLAGS))
+#endif
+
+/* Hardware flags: SZ0=1 (4k-byte) */
+#define _PAGE_FLAGS_HARD	_PAGE_SZ0
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	(_PAGE_SZ1)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+#endif
+
+#define _PAGE_SHARED	_PAGE_U0_SHARED
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_SHARED)
+
+#ifdef CONFIG_MMU
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_SHARED | _PAGE_FLAGS_HARD)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_FLAGS_HARD | (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | (type))
+#else /* no mmu */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+#define PAGE_KERNEL_PCC		__pgprot(0)
+#endif
+
+/*
+ * As i386 and MIPS, SuperH can't do page protection for execute, and
+ * considers that the same as a read.  Also, write permissions imply
+ * read permissions. This is the closest we can get..  
+ */
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x) 	phys_to_page(pte_val(x)&PTE_PHYS_MASK)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_not_present(pte_t pte){ return !(pte_val(pte) & _PAGE_PRESENT); }
+
+static inline pte_t pte_rdprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
+static inline pte_t pte_exprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); return pte; }
+static inline pte_t pte_mkread(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; }
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot &= ~_PAGE_CACHABLE;
+	return __pgprot(prot);
+}
+
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
+
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd) \
+	(phys_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+
+/* Encode and de-code a swap entry */
+/*
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#define __swp_type(x)		((x).val & 0xff)
+#define __swp_offset(x)		((x).val >> 10)
+#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 10) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << 1 })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
+
+typedef pte_t *pte_addr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#ifndef CONFIG_MMU
+extern unsigned int kobjsize(const void *objp);
+#endif /* !CONFIG_MMU */
+
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+#endif
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASM_SH_PAGE_H */
+
diff --git a/include/asm-sh/poll.h b/include/asm-sh/poll.h
new file mode 100644
index 000000000000..52f95b9188dc
--- /dev/null
+++ b/include/asm-sh/poll.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_POLL_H
+#define __ASM_SH_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __ASM_SH_POLL_H */
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
new file mode 100644
index 000000000000..0a3d2f54ab27
--- /dev/null
+++ b/include/asm-sh/posix_types.h
@@ -0,0 +1,122 @@
+#ifndef __ASM_SH_POSIX_TYPES_H
+#define __ASM_SH_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{ 
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
new file mode 100644
index 000000000000..c4904797d6df
--- /dev/null
+++ b/include/asm-sh/processor.h
@@ -0,0 +1,275 @@
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+#include <asm/ptrace.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
+#define CCN_PRR		0xff000044
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+	/* SH-2 types */
+	CPU_SH7604,
+
+	/* SH-3 types */
+	CPU_SH7705, CPU_SH7707,  CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7729, CPU_SH7300,
+
+	/* SH-4 types */
+	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+	CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
+	CPU_SH73180,
+
+	/* Unknown subtype */
+	CPU_SH_NONE
+};
+
+struct sh_cpuinfo {
+	enum cpu_type type;
+	char	hard_math;
+	unsigned long loops_per_jiffy;
+
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+	unsigned int memory_clock;
+#endif
+
+	struct cache_info icache;
+	struct cache_info dcache;
+
+	unsigned long flags;
+};
+
+extern struct sh_cpuinfo boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct sh_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE	0x7c000000UL
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_FD		0x00008000
+#define SR_DSP		0x00001000
+#define SR_IMASK	0x000000f0
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	struct sh_fpu_soft_struct soft;
+};
+
+/* 
+ * Processor flags
+ */
+
+#define CPU_HAS_FPU		0x0001	/* Hardware FPU support */
+#define CPU_HAS_P2_FLUSH_BUG	0x0002	/* Need to flush the cache in P2 area */
+#define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
+#define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
+#define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+
+	unsigned long trap_no, error_code;
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+	unsigned long ubc_pc;
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+/* Count of active tasks with UBC settings */
+extern int ubc_usercnt;
+
+#define INIT_THREAD  {						\
+	sizeof(init_stack) + (long) &init_stack, /* sp */	\
+	0,					 /* pc */	\
+	0, 0, 							\
+	0, 							\
+	0, 							\
+	{{{0,}},} 				/* fpu state */	\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	set_fs(USER_DS);			 \
+	regs->pr = 0;   		 	 \
+	regs->sr = SR_FD;	/* User mode. */ \
+	regs->pc = new_pc;			 \
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while(0)
+#define release_segments(mm)	do { } while(0)
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+static __inline__ void release_fpu(struct pt_regs *regs)
+{
+	regs->sr |= SR_FD;
+}
+
+static __inline__ void grab_fpu(struct pt_regs *regs)
+{
+	regs->sr &= ~SR_FD;
+}
+
+#ifdef CONFIG_CPU_SH4
+extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
+#else
+#define save_fpu(tsk)	do { } while (0)
+#endif
+
+#define unlazy_fpu(tsk, regs) do { 				\
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {	\
+		save_fpu(tsk, regs); 				\
+	}						\
+} while (0)
+
+#define clear_fpu(tsk, regs) do { 					\
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { 		\
+		clear_tsk_thread_flag(tsk, TIF_USEDFPU); 	\
+		release_fpu(regs);					\
+	}							\
+} while (0)
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
new file mode 100644
index 000000000000..0f75e16a7415
--- /dev/null
+++ b/include/asm-sh/ptrace.h
@@ -0,0 +1,104 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+#include <asm/ubc.h>
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ */
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR      	19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_SETDSPREGS	56
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (pc >= 0xa0000000UL && pc < 0xc0000000UL)
+		pc -= 0x20000000;
+	return pc;
+}
+#endif
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/resource.h b/include/asm-sh/resource.h
new file mode 100644
index 000000000000..9c2499a86ec0
--- /dev/null
+++ b/include/asm-sh/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_RESOURCE_H
+#define __ASM_SH_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* __ASM_SH_RESOURCE_H */
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
new file mode 100644
index 000000000000..cea9cdf9b925
--- /dev/null
+++ b/include/asm-sh/rtc.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+#ifdef __KERNEL__
+
+#include <asm/machvec.h>
+#include <asm/cpu/rtc.h>
+
+extern void sh_rtc_gettimeofday(struct timespec *ts);
+extern int sh_rtc_settimeofday(const time_t secs);
+extern void (*board_time_init)(void);
+extern void (*rtc_get_time)(struct timespec *);
+extern int (*rtc_set_time)(const time_t);
+
+/* RCR1 Bits */
+#define RCR1_CF		0x80	/* Carry Flag             */
+#define RCR1_CIE	0x10	/* Carry Interrupt Enable */
+#define RCR1_AIE	0x08	/* Alarm Interrupt Enable */
+#define RCR1_AF		0x01	/* Alarm Flag             */
+
+/* RCR2 Bits */
+#define RCR2_PEF	0x80	/* PEriodic interrupt Flag */
+#define RCR2_PESMASK	0x70	/* Periodic interrupt Set  */
+#define RCR2_RTCEN	0x08	/* ENable RTC              */
+#define RCR2_ADJ	0x04	/* ADJustment (30-second)  */
+#define RCR2_RESET	0x02	/* Reset bit               */
+#define RCR2_START	0x01	/* Start bit               */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d/ide.h b/include/asm-sh/rts7751r2d/ide.h
new file mode 100644
index 000000000000..416f96b407cb
--- /dev/null
+++ b/include/asm-sh/rts7751r2d/ide.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_RTS7751R2D_IDE_H
+#define __ASM_SH_RTS7751R2D_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/rts7751r2d/rts7751r2d.h>
+
+#endif /* __ASM_SH_RTS7751R2D_IDE_H */
+
diff --git a/include/asm-sh/rts7751r2d/io.h b/include/asm-sh/rts7751r2d/io.h
new file mode 100644
index 000000000000..241094020567
--- /dev/null
+++ b/include/asm-sh/rts7751r2d/io.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-sh/io_rts7751r2d.h
+ *
+ * Modified version of io_se.h for the rts7751r2d-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Renesas Technology sales RTS7751R2D
+ */
+
+#ifndef _ASM_SH_IO_RTS7751R2D_H
+#define _ASM_SH_IO_RTS7751R2D_H
+
+extern unsigned char rts7751r2d_inb(unsigned long port);
+extern unsigned short rts7751r2d_inw(unsigned long port);
+extern unsigned int rts7751r2d_inl(unsigned long port);
+
+extern void rts7751r2d_outb(unsigned char value, unsigned long port);
+extern void rts7751r2d_outw(unsigned short value, unsigned long port);
+extern void rts7751r2d_outl(unsigned int value, unsigned long port);
+
+extern unsigned char rts7751r2d_inb_p(unsigned long port);
+extern void rts7751r2d_outb_p(unsigned char value, unsigned long port);
+
+extern void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count);
+extern void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count);
+extern void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count);
+extern void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern void *rts7751r2d_ioremap(unsigned long offset, unsigned long size);
+
+extern unsigned long rts7751r2d_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_RTS7751R2D_H */
diff --git a/include/asm-sh/rts7751r2d/rts7751r2d.h b/include/asm-sh/rts7751r2d/rts7751r2d.h
new file mode 100644
index 000000000000..4e09ba597e9a
--- /dev/null
+++ b/include/asm-sh/rts7751r2d/rts7751r2d.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define PA_AXRST	0xa4000022	/* AX_LAN Reset control */
+#define PA_CFRST	0xa4000024	/* CF Reset control */
+#define	PA_ADMRTS	0xa4000026	/* SD Reset control */
+#define PA_EXTRST	0xa4000028	/* Extention Reset control */
+#define PA_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+#else
+#define PA_CFRST	0xa4000022	/* CF Reset control */
+#define	PA_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define	PA_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+#endif
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_DMPORT	0xa4000038	/* DM270 Output Port control */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define IRQ_PCIETH	0		/* PCI Ethernet IRQ */
+#define IRQ_CFCARD	1		/* CF Card IRQ */
+#define IRQ_CFINST	2		/* CF Card Insert IRQ */
+#define IRQ_PCMCIA	3		/* PCMCIA IRQ */
+#define IRQ_VOYAGER	4		/* VOYAGER IRQ */
+#define IRQ_ONETH	5		/* On board Ethernet IRQ */
+#else
+#define IRQ_KEYIN	0		/* Key Input IRQ */
+#define IRQ_PCIETH	1		/* PCI Ethernet IRQ */
+#define IRQ_CFCARD	2		/* CF Card IRQ */
+#define IRQ_CFINST	3		/* CF Card Insert IRQ */
+#define IRQ_PCMCIA	4		/* PCMCIA IRQ */
+#define IRQ_VOYAGER	5		/* VOYAGER IRQ */
+#endif
+#define IRQ_RTCALM	6		/* RTC Alarm IRQ */
+#define IRQ_RTCTIME	7		/* RTC Timer IRQ */
+#define IRQ_SDCARD	8		/* SD Card IRQ */
+#define IRQ_PCISLOT1	9		/* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2	10		/* PCI Slot #2 IRQ */
+#define	IRQ_EXTENTION	11		/* EXTn IRQ */
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/include/asm-sh/rts7751r2d/voyagergx_reg.h b/include/asm-sh/rts7751r2d/voyagergx_reg.h
new file mode 100644
index 000000000000..f031b5d6cf54
--- /dev/null
+++ b/include/asm-sh/rts7751r2d/voyagergx_reg.h
@@ -0,0 +1,313 @@
+/* -------------------------------------------------------------------- */
+/* voyagergx_reg.h                                                      */
+/* -------------------------------------------------------------------- */
+/*  This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Copyright 2003 (c) Lineo uSolutions,Inc.
+*/
+/* -------------------------------------------------------------------- */
+
+#ifndef _VOYAGER_GX_REG_H
+#define _VOYAGER_GX_REG_H
+
+#define VOYAGER_BASE			0xb3e00000
+#define VOYAGER_USBH_BASE		(0x40000 + VOYAGER_BASE)
+#define VOYAGER_UART_BASE		(0x30000 + VOYAGER_BASE)
+#define	VOYAGER_AC97_BASE		(0xa0000 + VOYAGER_BASE)
+
+#define VOYAGER_IRQ_NUM			32
+#define VOYAGER_IRQ_BASE		50
+#define VOYAGER_USBH_IRQ		VOYAGER_IRQ_BASE + 6
+#define VOYAGER_8051_IRQ		VOYAGER_IRQ_BASE + 10
+#define VOYAGER_UART0_IRQ		VOYAGER_IRQ_BASE + 12
+#define VOYAGER_UART1_IRQ		VOYAGER_IRQ_BASE + 13
+#define	VOYAGER_AC97_IRQ		VOYAGER_IRQ_BASE + 17
+
+/* ----- MISC controle  register ------------------------------ */
+#define MISC_CTRL			(0x000004 + VOYAGER_BASE)
+#define MISC_CTRL_USBCLK_48		(3 << 28)
+#define MISC_CTRL_USBCLK_96		(2 << 28)
+#define MISC_CTRL_USBCLK_CRYSTAL	(1 << 28)
+
+/* ----- GPIO[31:0] register --------------------------------- */
+#define GPIO_MUX_LOW			(0x000008 + VOYAGER_BASE)
+#define GPIO_MUX_LOW_AC97		0x1F000000
+#define GPIO_MUX_LOW_8051		0x0000ffff
+#define GPIO_MUX_LOW_PWM		(1 << 29)
+
+/* ----- GPIO[63:32] register --------------------------------- */
+#define GPIO_MUX_HIGH			(0x00000C + VOYAGER_BASE)
+
+/* ----- DRAM controle  register ------------------------------- */
+#define DRAM_CTRL			(0x000010 + VOYAGER_BASE)
+#define DRAM_CTRL_EMBEDDED		(1 << 31)
+#define DRAM_CTRL_CPU_BURST_1		(0 << 28)
+#define DRAM_CTRL_CPU_BURST_2		(1 << 28)
+#define DRAM_CTRL_CPU_BURST_4		(2 << 28)
+#define DRAM_CTRL_CPU_BURST_8		(3 << 28)
+#define DRAM_CTRL_CPU_CAS_LATENCY	(1 << 27)
+#define DRAM_CTRL_CPU_SIZE_2		(0 << 24)
+#define DRAM_CTRL_CPU_SIZE_4		(1 << 24)
+#define DRAM_CTRL_CPU_SIZE_64		(4 << 24)
+#define DRAM_CTRL_CPU_SIZE_32		(5 << 24)
+#define DRAM_CTRL_CPU_SIZE_16		(6 << 24)
+#define DRAM_CTRL_CPU_SIZE_8		(7 << 24)
+#define DRAM_CTRL_CPU_COLUMN_SIZE_1024	(0 << 22)
+#define DRAM_CTRL_CPU_COLUMN_SIZE_512	(2 << 22)
+#define DRAM_CTRL_CPU_COLUMN_SIZE_256	(3 << 22)
+#define DRAM_CTRL_CPU_ACTIVE_PRECHARGE	(1 << 21)
+#define DRAM_CTRL_CPU_RESET		(1 << 20)
+#define DRAM_CTRL_CPU_BANKS		(1 << 19)
+#define DRAM_CTRL_CPU_WRITE_PRECHARGE	(1 << 18)
+#define DRAM_CTRL_BLOCK_WRITE		(1 << 17)
+#define DRAM_CTRL_REFRESH_COMMAND	(1 << 16)
+#define DRAM_CTRL_SIZE_4		(0 << 13)
+#define DRAM_CTRL_SIZE_8		(1 << 13)
+#define DRAM_CTRL_SIZE_16		(2 << 13)
+#define DRAM_CTRL_SIZE_32		(3 << 13)
+#define DRAM_CTRL_SIZE_64		(4 << 13)
+#define DRAM_CTRL_SIZE_2		(5 << 13)
+#define DRAM_CTRL_COLUMN_SIZE_256	(0 << 11)
+#define DRAM_CTRL_COLUMN_SIZE_512	(2 << 11)
+#define DRAM_CTRL_COLUMN_SIZE_1024	(3 << 11)
+#define DRAM_CTRL_BLOCK_WRITE_TIME	(1 << 10)
+#define DRAM_CTRL_BLOCK_WRITE_PRECHARGE	(1 << 9)
+#define DRAM_CTRL_ACTIVE_PRECHARGE	(1 << 8)
+#define DRAM_CTRL_RESET			(1 << 7)
+#define DRAM_CTRL_REMAIN_ACTIVE		(1 << 6)
+#define DRAM_CTRL_BANKS			(1 << 1)
+#define DRAM_CTRL_WRITE_PRECHARGE	(1 << 0)
+
+/* ----- Arvitration control register -------------------------- */
+#define ARBITRATION_CTRL		(0x000014 + VOYAGER_BASE)
+#define ARBITRATION_CTRL_CPUMEM		(1 << 29)
+#define ARBITRATION_CTRL_INTMEM		(1 << 28)
+#define ARBITRATION_CTRL_USB_OFF	(0 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_1	(1 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_2	(2 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_3	(3 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_4	(4 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_5	(5 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_6	(6 << 24)
+#define ARBITRATION_CTRL_USB_PRIORITY_7	(7 << 24)
+#define ARBITRATION_CTRL_PANEL_OFF	(0 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_1	(1 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_2	(2 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_3	(3 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_4	(4 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_5	(5 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_6	(6 << 20)
+#define ARBITRATION_CTRL_PANEL_PRIORITY_7	(7 << 20)
+#define ARBITRATION_CTRL_ZVPORT_OFF	(0 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_1	(1 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_2	(2 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_3	(3 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_4	(4 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_5	(5 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_6	(6 << 16)
+#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_7	(7 << 16)
+#define ARBITRATION_CTRL_CMD_INTPR_OFF	(0 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_1	(1 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_2	(2 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_3	(3 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_4	(4 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_5	(5 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_6	(6 << 12)
+#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_7	(7 << 12)
+#define ARBITRATION_CTRL_DMA_OFF	(0 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_1	(1 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_2	(2 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_3	(3 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_4	(4 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_5	(5 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_6	(6 << 8)
+#define ARBITRATION_CTRL_DMA_PRIORITY_7	(7 << 8)
+#define ARBITRATION_CTRL_VIDEO_OFF	(0 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_1	(1 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_2	(2 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_3	(3 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_4	(4 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_5	(5 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_6	(6 << 4)
+#define ARBITRATION_CTRL_VIDEO_PRIORITY_7	(7 << 4)
+#define ARBITRATION_CTRL_CRT_OFF	(0 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_1	(1 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_2	(2 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_3	(3 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_4	(4 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_5	(5 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_6	(6 << 0)
+#define ARBITRATION_CTRL_CRT_PRIORITY_7	(7 << 0)
+
+/* ----- Command list status register -------------------------- */
+#define CMD_INTPR_STATUS		(0x000024 + VOYAGER_BASE)
+
+/* ----- Interrupt status register ----------------------------- */
+#define INT_STATUS			(0x00002c + VOYAGER_BASE)
+#define INT_STATUS_UH			(1 << 6)
+#define INT_STATUS_MC			(1 << 10)
+#define INT_STATUS_U0			(1 << 12)
+#define INT_STATUS_U1			(1 << 13)
+#define	INT_STATUS_AC			(1 << 17)
+
+/* ----- Interrupt mask register ------------------------------ */
+#define VOYAGER_INT_MASK		(0x000030 + VOYAGER_BASE)
+#define VOYAGER_INT_MASK_AC		(1 << 17)
+
+/* ----- Current Gate register ---------------------------------*/
+#define CURRENT_GATE			(0x000038 + VOYAGER_BASE)
+
+/* ----- Power mode 0 gate register --------------------------- */
+#define POWER_MODE0_GATE		(0x000040 + VOYAGER_BASE)
+#define POWER_MODE0_GATE_G		(1 << 6)
+#define POWER_MODE0_GATE_U0		(1 << 7)
+#define POWER_MODE0_GATE_U1		(1 << 8)
+#define POWER_MODE0_GATE_UH		(1 << 11)
+#define	POWER_MODE0_GATE_AC		(1 << 18)
+
+/* ----- Power mode 1 gate register --------------------------- */
+#define POWER_MODE1_GATE		(0x000048 + VOYAGER_BASE)
+#define POWER_MODE1_GATE_G		(1 << 6)
+#define POWER_MODE1_GATE_U0		(1 << 7)
+#define POWER_MODE1_GATE_U1		(1 << 8)
+#define POWER_MODE1_GATE_UH		(1 << 11)
+#define	POWER_MODE1_GATE_AC		(1 << 18)
+
+/* ----- Power mode 0 clock register -------------------------- */
+#define POWER_MODE0_CLOCK		(0x000044 + VOYAGER_BASE)
+
+/* ----- Power mode 1 clock register -------------------------- */
+#define POWER_MODE1_CLOCK		(0x00004C + VOYAGER_BASE)
+
+/* ----- Power mode controll register ------------------------- */
+#define POWER_MODE_CTRL			(0x000054 + VOYAGER_BASE)
+
+/* ----- Miscellaneous Timing register ------------------------ */
+#define SYSTEM_DRAM_CTRL		(0x000068 + VOYAGER_BASE)
+
+/* ----- PWM register ------------------------------------------*/
+#define PWM_0				(0x010020 + VOYAGER_BASE)
+#define PWM_0_HC(x)			(((x)&0x0fff)<<20)
+#define PWM_0_LC(x)			(((x)&0x0fff)<<8 )
+#define PWM_0_CLK_DEV(x)		(((x)&0x000f)<<4 )
+#define PWM_0_EN			(1<<0)
+
+/* ----- I2C register ----------------------------------------- */
+#define I2C_BYTECOUNT			(0x010040 + VOYAGER_BASE)
+#define I2C_CONTROL			(0x010041 + VOYAGER_BASE)
+#define I2C_STATUS			(0x010042 + VOYAGER_BASE)
+#define I2C_RESET			(0x010042 + VOYAGER_BASE)
+#define I2C_SADDRESS			(0x010043 + VOYAGER_BASE)
+#define I2C_DATA			(0x010044 + VOYAGER_BASE)
+
+/* ----- Controle register bits ----------------------------------------- */
+#define I2C_CONTROL_E			(1 << 0)
+#define I2C_CONTROL_MODE		(1 << 1)
+#define I2C_CONTROL_STATUS		(1 << 2)
+#define I2C_CONTROL_INT			(1 << 4)
+#define I2C_CONTROL_INTACK		(1 << 5)
+#define I2C_CONTROL_REPEAT		(1 << 6)
+
+/* ----- Status register bits ----------------------------------------- */
+#define I2C_STATUS_BUSY			(1 << 0)
+#define I2C_STATUS_ACK			(1 << 1)
+#define I2C_STATUS_ERROR		(1 << 2)
+#define I2C_STATUS_COMPLETE		(1 << 3)
+
+/* ----- Reset register  ---------------------------------------------- */
+#define I2C_RESET_ERROR			(1 << 2)
+
+/* ----- transmission frequencies ------------------------------------- */
+#define I2C_SADDRESS_SELECT		(1 << 0)
+
+/* ----- Display Controll register ----------------------------------------- */
+#define PANEL_DISPLAY_CTRL		(0x080000 + VOYAGER_BASE)
+#define PANEL_DISPLAY_CTRL_BIAS         (1<<26)
+#define PANEL_PAN_CTRL			(0x080004 + VOYAGER_BASE)
+#define PANEL_COLOR_KEY			(0x080008 + VOYAGER_BASE)
+#define PANEL_FB_ADDRESS		(0x08000C + VOYAGER_BASE)
+#define PANEL_FB_WIDTH			(0x080010 + VOYAGER_BASE)
+#define PANEL_WINDOW_WIDTH		(0x080014 + VOYAGER_BASE)
+#define PANEL_WINDOW_HEIGHT		(0x080018 + VOYAGER_BASE)
+#define PANEL_PLANE_TL			(0x08001C + VOYAGER_BASE)
+#define PANEL_PLANE_BR			(0x080020 + VOYAGER_BASE)
+#define PANEL_HORIZONTAL_TOTAL		(0x080024 + VOYAGER_BASE)
+#define PANEL_HORIZONTAL_SYNC		(0x080028 + VOYAGER_BASE)
+#define PANEL_VERTICAL_TOTAL		(0x08002C + VOYAGER_BASE)
+#define PANEL_VERTICAL_SYNC		(0x080030 + VOYAGER_BASE)
+#define PANEL_CURRENT_LINE		(0x080034 + VOYAGER_BASE)
+#define VIDEO_DISPLAY_CTRL		(0x080040 + VOYAGER_BASE)
+#define VIDEO_FB_0_ADDRESS		(0x080044 + VOYAGER_BASE)
+#define VIDEO_FB_WIDTH			(0x080048 + VOYAGER_BASE)
+#define VIDEO_FB_0_LAST_ADDRESS		(0x08004C + VOYAGER_BASE)
+#define VIDEO_PLANE_TL			(0x080050 + VOYAGER_BASE)
+#define VIDEO_PLANE_BR			(0x080054 + VOYAGER_BASE)
+#define VIDEO_SCALE			(0x080058 + VOYAGER_BASE)
+#define VIDEO_INITIAL_SCALE		(0x08005C + VOYAGER_BASE)
+#define VIDEO_YUV_CONSTANTS		(0x080060 + VOYAGER_BASE)
+#define VIDEO_FB_1_ADDRESS		(0x080064 + VOYAGER_BASE)
+#define VIDEO_FB_1_LAST_ADDRESS		(0x080068 + VOYAGER_BASE)
+#define VIDEO_ALPHA_DISPLAY_CTRL	(0x080080 + VOYAGER_BASE)
+#define VIDEO_ALPHA_FB_ADDRESS		(0x080084 + VOYAGER_BASE)
+#define VIDEO_ALPHA_FB_WIDTH		(0x080088 + VOYAGER_BASE)
+#define VIDEO_ALPHA_FB_LAST_ADDRESS	(0x08008C + VOYAGER_BASE)
+#define VIDEO_ALPHA_PLANE_TL		(0x080090 + VOYAGER_BASE)
+#define VIDEO_ALPHA_PLANE_BR		(0x080094 + VOYAGER_BASE)
+#define VIDEO_ALPHA_SCALE		(0x080098 + VOYAGER_BASE)
+#define VIDEO_ALPHA_INITIAL_SCALE	(0x08009C + VOYAGER_BASE)
+#define VIDEO_ALPHA_CHROMA_KEY		(0x0800A0 + VOYAGER_BASE)
+#define PANEL_HWC_ADDRESS		(0x0800F0 + VOYAGER_BASE)
+#define PANEL_HWC_LOCATION		(0x0800F4 + VOYAGER_BASE)
+#define PANEL_HWC_COLOR_12		(0x0800F8 + VOYAGER_BASE)
+#define PANEL_HWC_COLOR_3		(0x0800FC + VOYAGER_BASE)
+#define ALPHA_DISPLAY_CTRL		(0x080100 + VOYAGER_BASE)
+#define ALPHA_FB_ADDRESS		(0x080104 + VOYAGER_BASE)
+#define ALPHA_FB_WIDTH			(0x080108 + VOYAGER_BASE)
+#define ALPHA_PLANE_TL			(0x08010C + VOYAGER_BASE)
+#define ALPHA_PLANE_BR			(0x080110 + VOYAGER_BASE)
+#define ALPHA_CHROMA_KEY		(0x080114 + VOYAGER_BASE)
+#define CRT_DISPLAY_CTRL		(0x080200 + VOYAGER_BASE)
+#define CRT_FB_ADDRESS			(0x080204 + VOYAGER_BASE)
+#define CRT_FB_WIDTH			(0x080208 + VOYAGER_BASE)
+#define CRT_HORIZONTAL_TOTAL		(0x08020C + VOYAGER_BASE)
+#define CRT_HORIZONTAL_SYNC		(0x080210 + VOYAGER_BASE)
+#define CRT_VERTICAL_TOTAL		(0x080214 + VOYAGER_BASE)
+#define CRT_VERTICAL_SYNC		(0x080218 + VOYAGER_BASE)
+#define CRT_SIGNATURE_ANALYZER		(0x08021C + VOYAGER_BASE)
+#define CRT_CURRENT_LINE		(0x080220 + VOYAGER_BASE)
+#define CRT_MONITOR_DETECT		(0x080224 + VOYAGER_BASE)
+#define CRT_HWC_ADDRESS			(0x080230 + VOYAGER_BASE)
+#define CRT_HWC_LOCATION		(0x080234 + VOYAGER_BASE)
+#define CRT_HWC_COLOR_12		(0x080238 + VOYAGER_BASE)
+#define CRT_HWC_COLOR_3			(0x08023C + VOYAGER_BASE)
+#define CRT_PALETTE_RAM			(0x080400 + VOYAGER_BASE)
+#define PANEL_PALETTE_RAM		(0x080800 + VOYAGER_BASE)
+#define VIDEO_PALETTE_RAM		(0x080C00 + VOYAGER_BASE)
+
+/* ----- 8051 Controle register ----------------------------------------- */
+#define VOYAGER_8051_BASE		(0x000c0000 + VOYAGER_BASE)
+#define VOYAGER_8051_RESET		(0x000b0000 + VOYAGER_BASE)
+#define VOYAGER_8051_SELECT		(0x000b0004 + VOYAGER_BASE)
+#define VOYAGER_8051_CPU_INT		(0x000b000c + VOYAGER_BASE)
+
+/* ----- AC97 Controle register ----------------------------------------- */
+#define AC97_TX_SLOT0			(0x00000000 + VOYAGER_AC97_BASE)
+#define AC97_CONTROL_STATUS		(0x00000080 + VOYAGER_AC97_BASE)
+#define AC97C_READ			(1 << 19)
+#define AC97C_WD_BIT			(1 << 2)
+#define AC97C_INDEX_MASK		0x7f
+/* -------------------------------------------------------------------- */
+
+#endif /* _VOYAGER_GX_REG_H */
diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h
new file mode 100644
index 000000000000..1be4337f5259
--- /dev/null
+++ b/include/asm-sh/rwsem.h
@@ -0,0 +1,170 @@
+/*
+ * include/asm-ppc/rwsem.h: R/W semaphores for SH using the stuff
+ * in lib/rwsem.c.
+ */
+
+#ifndef _ASM_SH_RWSEM_H
+#define _ASM_SH_RWSEM_H
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	long		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
+		smp_wmb();
+	else
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+		smp_wmb();
+	else
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	smp_wmb();
+	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	smp_mb();
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SH_RWSEM_H */
diff --git a/include/asm-sh/saturn/io.h b/include/asm-sh/saturn/io.h
new file mode 100644
index 000000000000..f1b9b5d633f4
--- /dev/null
+++ b/include/asm-sh/saturn/io.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-sh/saturn/io.h
+ *
+ * I/O functions for use on the Sega Saturn.
+ *
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#ifndef __ASM_SH_SATURN_IO_H
+#define __ASM_SH_SATURN_IO_H
+
+/* arch/sh/boards/saturn/io.c */
+extern unsigned long saturn_isa_port2addr(unsigned long offset);
+extern void *saturn_ioremap(unsigned long offset, unsigned long size);
+extern void saturn_iounmap(void *addr);
+
+#endif /* __ASM_SH_SATURN_IO_H */
+
diff --git a/include/asm-sh/saturn/smpc.h b/include/asm-sh/saturn/smpc.h
new file mode 100644
index 000000000000..5de5c12d6347
--- /dev/null
+++ b/include/asm-sh/saturn/smpc.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-sh/saturn/smpc.h
+ *
+ * System Manager / Peripheral Control definitions.
+ *
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#ifndef __ASM_SH_SATURN_SMPC_H
+#define __ASM_SH_SATURN_SMPC_H
+
+#include <asm/io.h>
+
+#define SMPC_COMMAND	0x2010001f	/* SMPC command register */
+#define SMPC_RESULT	0x2010005f	/* SMPC result register */
+#define SMPC_STATUS	0x20100063	/* SMPC status register */
+
+#define SMPC_CMD_MSHON	0x0001		/* Master SH On */
+#define SMPC_CMD_SSHON	0x0002		/* Slave SH On */
+#define SMPC_CMD_SSHOFF	0x0003		/* Slave SH Off */
+#define SMPC_CMD_SNDON	0x0004		/* Sound On */
+#define SMPC_CMD_SNDOFF	0x0005		/* Sound Off */
+#define SMPC_CMD_CDON	0x0006		/* CD On */
+#define SMPC_CMD_CDOFF	0x0007		/* CD Off */
+
+static inline void smpc_barrier(void)
+{
+	while ((ctrl_inb(SMPC_STATUS) & 0x0001) == 0x0001)
+		;
+}
+
+#endif /* __ASM_SH_SATURN_SMPC_H */
+
diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
new file mode 100644
index 000000000000..7b91df140022
--- /dev/null
+++ b/include/asm-sh/scatterlist.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_SCATTERLIST_H
+#define __ASM_SH_SCATTERLIST_H
+
+struct scatterlist {
+    struct page * page; /* Location for highmem page, if any */
+    unsigned int offset;/* for highmem, page offset */
+    dma_addr_t dma_address;
+    unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x1fffffff)
+
+#endif /* !(__ASM_SH_SCATTERLIST_H) */
diff --git a/include/asm-sh/se/io.h b/include/asm-sh/se/io.h
new file mode 100644
index 000000000000..9eeb86cd6cef
--- /dev/null
+++ b/include/asm-sh/se/io.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/io_se.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi SolutionEngine
+ */
+
+#ifndef _ASM_SH_IO_SE_H
+#define _ASM_SH_IO_SE_H
+
+extern unsigned char se_inb(unsigned long port);
+extern unsigned short se_inw(unsigned long port);
+extern unsigned int se_inl(unsigned long port);
+
+extern void se_outb(unsigned char value, unsigned long port);
+extern void se_outw(unsigned short value, unsigned long port);
+extern void se_outl(unsigned int value, unsigned long port);
+
+extern unsigned char se_inb_p(unsigned long port);
+extern void se_outb_p(unsigned char value, unsigned long port);
+
+extern void se_insb(unsigned long port, void *addr, unsigned long count);
+extern void se_insw(unsigned long port, void *addr, unsigned long count);
+extern void se_insl(unsigned long port, void *addr, unsigned long count);
+extern void se_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void se_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void se_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long se_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_SE_H */
diff --git a/include/asm-sh/se/se.h b/include/asm-sh/se/se.h
new file mode 100644
index 000000000000..791c5da0388a
--- /dev/null
+++ b/include/asm-sh/se/se.h
@@ -0,0 +1,77 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC   12
+#else
+#define IRQ_STNIC	10
+#endif
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se/smc37c93x.h b/include/asm-sh/se/smc37c93x.h
new file mode 100644
index 000000000000..585da2a8fc45
--- /dev/null
+++ b/include/asm-sh/se/smc37c93x.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SMC37C93X_H
+#define __ASM_SH_SMC37C93X_H
+
+/*
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_RTC			6
+#define LDN_KBC			7
+#define LDN_AUXIO		8
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER		0x55
+#define CONFIG_EXIT		0xaa
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define DMA_SELECT_INDEX	0x74
+
+#define GPIO46_INDEX		0xc6
+#define GPIO47_INDEX		0xc7
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_SMC37C93X_H */
diff --git a/include/asm-sh/se7300/io.h b/include/asm-sh/se7300/io.h
new file mode 100644
index 000000000000..c6af85529714
--- /dev/null
+++ b/include/asm-sh/se7300/io.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-sh/se7300/io.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ * IO functions for SH-Mobile(SH7300) SolutionEngine
+ */
+
+#ifndef _ASM_SH_IO_7300SE_H
+#define _ASM_SH_IO_7300SE_H
+
+extern unsigned char sh7300se_inb(unsigned long port);
+extern unsigned short sh7300se_inw(unsigned long port);
+extern unsigned int sh7300se_inl(unsigned long port);
+
+extern void sh7300se_outb(unsigned char value, unsigned long port);
+extern void sh7300se_outw(unsigned short value, unsigned long port);
+extern void sh7300se_outl(unsigned int value, unsigned long port);
+
+extern unsigned char sh7300se_inb_p(unsigned long port);
+extern void sh7300se_outb_p(unsigned char value, unsigned long port);
+
+extern void sh7300se_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh7300se_insw(unsigned long port, void *addr, unsigned long count);
+extern void sh7300se_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh7300se_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh7300se_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void sh7300se_outsl(unsigned long port, const void *addr, unsigned long count);
+
+#endif /* _ASM_SH_IO_7300SE_H */
diff --git a/include/asm-sh/se7300/se7300.h b/include/asm-sh/se7300/se7300.h
new file mode 100644
index 000000000000..3ec1ded86c97
--- /dev/null
+++ b/include/asm-sh/se7300/se7300.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_SH_HITACHI_SE7300_H
+#define __ASM_SH_HITACHI_SE7300_H
+
+/*
+ * linux/include/asm-sh/se/se7300.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7300 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0800000	/* LED */
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_EPLD_MODESET	0xb0a00000	/* FPGA Mode set register */
+#define PA_EPLD_ST1	0xb0a80000	/* FPGA Interrupt status register1 */
+#define PA_EPLD_ST2	0xb0ac0000	/* FPGA Interrupt status register2 */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#endif  /* __ASM_SH_HITACHI_SE7300_H */
diff --git a/include/asm-sh/se73180/io.h b/include/asm-sh/se73180/io.h
new file mode 100644
index 000000000000..c9cb1b9412c6
--- /dev/null
+++ b/include/asm-sh/se73180/io.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-sh/se73180/io.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ * Based on include/asm-sh/se7300/io.h
+ *
+ * IO functions for SH-Mobile3(SH73180) SolutionEngine
+ *
+ */
+
+#ifndef _ASM_SH_IO_73180SE_H
+#define _ASM_SH_IO_73180SE_H
+
+extern unsigned char sh73180se_inb(unsigned long port);
+extern unsigned short sh73180se_inw(unsigned long port);
+extern unsigned int sh73180se_inl(unsigned long port);
+
+extern void sh73180se_outb(unsigned char value, unsigned long port);
+extern void sh73180se_outw(unsigned short value, unsigned long port);
+extern void sh73180se_outl(unsigned int value, unsigned long port);
+
+extern unsigned char sh73180se_inb_p(unsigned long port);
+extern void sh73180se_outb_p(unsigned char value, unsigned long port);
+
+extern void sh73180se_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh73180se_insw(unsigned long port, void *addr, unsigned long count);
+extern void sh73180se_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh73180se_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh73180se_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void sh73180se_outsl(unsigned long port, const void *addr, unsigned long count);
+
+#endif /* _ASM_SH_IO_73180SE_H */
diff --git a/include/asm-sh/se73180/se73180.h b/include/asm-sh/se73180/se73180.h
new file mode 100644
index 000000000000..f5b93e39e768
--- /dev/null
+++ b/include/asm-sh/se73180/se73180.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SH_HITACHI_SE73180_H
+#define __ASM_SH_HITACHI_SE73180_H
+
+/*
+ * include/asm-sh/se/se73180.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 73180 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_EPLD_MODESET	0xb0a00000	/* FPGA Mode set register */
+#define PA_EPLD_ST1	0xb0a80000	/* FPGA Interrupt status register1 */
+#define PA_EPLD_ST2	0xb0ac0000	/* FPGA Interrupt status register2 */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#endif  /* __ASM_SH_HITACHI_SE73180_H */
diff --git a/include/asm-sh/se7751/io.h b/include/asm-sh/se7751/io.h
new file mode 100644
index 000000000000..78d8f5744bc5
--- /dev/null
+++ b/include/asm-sh/se7751/io.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/io_7751se.h
+ *
+ * Modified version of io_se.h for the 7751se-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi SolutionEngine
+ */
+
+#ifndef _ASM_SH_IO_7751SE_H
+#define _ASM_SH_IO_7751SE_H
+
+extern unsigned char sh7751se_inb(unsigned long port);
+extern unsigned short sh7751se_inw(unsigned long port);
+extern unsigned int sh7751se_inl(unsigned long port);
+
+extern void sh7751se_outb(unsigned char value, unsigned long port);
+extern void sh7751se_outw(unsigned short value, unsigned long port);
+extern void sh7751se_outl(unsigned int value, unsigned long port);
+
+extern unsigned char sh7751se_inb_p(unsigned long port);
+extern void sh7751se_outb_p(unsigned char value, unsigned long port);
+
+extern void sh7751se_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh7751se_insw(unsigned long port, void *addr, unsigned long count);
+extern void sh7751se_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh7751se_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh7751se_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned char sh7751se_readb(unsigned long addr);
+extern unsigned short sh7751se_readw(unsigned long addr);
+extern unsigned int sh7751se_readl(unsigned long addr);
+extern void sh7751se_writeb(unsigned char b, unsigned long addr);
+extern void sh7751se_writew(unsigned short b, unsigned long addr);
+extern void sh7751se_writel(unsigned int b, unsigned long addr);
+
+extern unsigned long sh7751se_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_7751SE_H */
diff --git a/include/asm-sh/se7751/se7751.h b/include/asm-sh/se7751/se7751.h
new file mode 100644
index 000000000000..738e22bebdfb
--- /dev/null
+++ b/include/asm-sh/se7751/se7751.h
@@ -0,0 +1,68 @@
+#ifndef __ASM_SH_HITACHI_7751SE_H
+#define __ASM_SH_HITACHI_7751SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_7751se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controler */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+#endif  /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h
new file mode 100644
index 000000000000..57abd708b236
--- /dev/null
+++ b/include/asm-sh/sections.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_SECTIONS_H
+#define __ASM_SH_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _end[];
+
+#endif /* __ASM_SH_SECTIONS_H */
+
diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h
new file mode 100644
index 000000000000..e417eab4c7d7
--- /dev/null
+++ b/include/asm-sh/segment.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/semaphore-helper.h b/include/asm-sh/semaphore-helper.h
new file mode 100644
index 000000000000..bd8230c369ca
--- /dev/null
+++ b/include/asm-sh/semaphore-helper.h
@@ -0,0 +1,89 @@
+#ifndef __ASM_SH_SEMAPHORE_HELPER_H
+#define __ASM_SH_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ * (C) Copyright 1999 Andrea Arcangeli
+ */
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ *
+ * This is trivially done with load_locked/store_cond,
+ * which we have.  Let the rest of the losers suck eggs.
+ */
+static __inline__ void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc((atomic_t *)&sem->sleepers);
+}
+
+static __inline__ int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ *
+ * We must undo the sem->count down_trylock() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 1;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->sleepers--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif /* __ASM_SH_SEMAPHORE_HELPER_H */
diff --git a/include/asm-sh/semaphore.h b/include/asm-sh/semaphore.h
new file mode 100644
index 000000000000..b923a77a8a7e
--- /dev/null
+++ b/include/asm-sh/semaphore.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_SH_SEMAPHORE_H
+#define __ASM_SH_SEMAPHORE_H
+
+#include <linux/linkage.h>
+
+#ifdef __KERNEL__
+/*
+ * SMP- and interrupt-safe semaphores.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * SuperH verison by Niibe Yutaka
+ *  (Currently no asm implementation but generic C code...)
+ */
+
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <linux/wait.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+/*
+ *	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+ *
+ * i'd rather use the more flexible initialization above, but sadly
+ * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
+ */
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+#if 0
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+#endif
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	int ret = 0;
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_trylock(sem);
+	return ret;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ */
+static inline void up(struct semaphore * sem)
+{
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif
+#endif /* __ASM_SH_SEMAPHORE_H */
diff --git a/include/asm-sh/sembuf.h b/include/asm-sh/sembuf.h
new file mode 100644
index 000000000000..d79f3bd570b2
--- /dev/null
+++ b/include/asm-sh/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_SEMBUF_H
+#define __ASM_SH_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SEMBUF_H */
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
new file mode 100644
index 000000000000..5474dbdbaa86
--- /dev/null
+++ b/include/asm-sh/serial.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#ifdef CONFIG_SH_EC3104
+#include <asm/serial-ec3104.h>
+#elif defined (CONFIG_SH_BIGSUR)
+#include <asm/serial-bigsur.h>
+#else
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#ifdef CONFIG_HD64465
+#include <asm/hd64465.h>
+
+#define STD_SERIAL_PORT_DEFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
+
+#else
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
+
+#endif
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+#endif
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h
new file mode 100644
index 000000000000..d19de7c8df4e
--- /dev/null
+++ b/include/asm-sh/setup.h
@@ -0,0 +1,8 @@
+#ifdef __KERNEL__
+#ifndef _SH_SETUP_H
+#define _SH_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _SH_SETUP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-sh/sh03/ide.h b/include/asm-sh/sh03/ide.h
new file mode 100644
index 000000000000..73ee92e5c79e
--- /dev/null
+++ b/include/asm-sh/sh03/ide.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_SH03_IDE_H
+#define __ASM_SH_SH03_IDE_H
+
+#define IRQ_CFCARD	8
+#define IRQ_PCMCIA	8
+
+#endif /* __ASM_SH_SH03_IDE_H */
diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h
new file mode 100644
index 000000000000..25792e9831ea
--- /dev/null
+++ b/include/asm-sh/sh03/io.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-sh/sh03/io.h
+ *
+ * Copyright 2004 Interface Co.,Ltd. Saito.K
+ *
+ * IO functions for an Interface CTP/PCI-SH03
+ */
+
+#ifndef _ASM_SH_IO_SH03_H
+#define _ASM_SH_IO_SH03_H
+
+#include <linux/time.h>
+
+#define INTC_IPRD	0xffd00010UL
+
+#define IRL0_IRQ	2
+#define IRL0_IPR_ADDR	INTC_IPRD
+#define IRL0_IPR_POS	3
+#define IRL0_PRIORITY	13
+
+#define IRL1_IRQ	5
+#define IRL1_IPR_ADDR	INTC_IPRD
+#define IRL1_IPR_POS	2
+#define IRL1_PRIORITY	10
+
+#define IRL2_IRQ	8
+#define IRL2_IPR_ADDR	INTC_IPRD
+#define IRL2_IPR_POS	1
+#define IRL2_PRIORITY	7
+
+#define IRL3_IRQ	11
+#define IRL3_IPR_ADDR	INTC_IPRD
+#define IRL3_IPR_POS	0
+#define IRL3_PRIORITY	4
+
+
+extern unsigned long sh03_isa_port2addr(unsigned long offset);
+
+extern void setup_sh03(void);
+extern void init_sh03_IRQ(void);
+extern void heartbeat_sh03(void);
+
+extern void sh03_rtc_gettimeofday(struct timeval *tv);
+extern int sh03_rtc_settimeofday(const struct timeval *tv);
+
+#endif /* _ASM_SH_IO_SH03_H */
diff --git a/include/asm-sh/sh03/sh03.h b/include/asm-sh/sh03/sh03.h
new file mode 100644
index 000000000000..19c40b80428d
--- /dev/null
+++ b/include/asm-sh/sh03/sh03.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_SH03_H
+#define __ASM_SH_SH03_H
+
+/*
+ * linux/include/asm-sh/sh03/sh03.h
+ *
+ * Copyright (C) 2004  Interface Co., Ltd. Saito.K
+ *
+ * Interface CTP/PCI-SH03 support
+ */
+
+#define PA_PCI_IO       (0xbe240000)    /* PCI I/O space */
+#define PA_PCI_MEM      (0xbd000000)    /* PCI MEM space */
+
+#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
+
+#endif  /* __ASM_SH_SH03_H */
diff --git a/include/asm-sh/sh2000/sh2000.h b/include/asm-sh/sh2000/sh2000.h
new file mode 100644
index 000000000000..8d547324d59a
--- /dev/null
+++ b/include/asm-sh/sh2000/sh2000.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_SH2000_SH2000_H
+#define __ASM_SH_SH2000_SH2000_H
+
+/* arch/sh/boards/sh2000/setup.c */
+extern int setup_sh2000(void);
+
+#endif /* __ASM_SH_SH2000_SH2000_H */
+
diff --git a/include/asm-sh/sh_bios.h b/include/asm-sh/sh_bios.h
new file mode 100644
index 000000000000..0ca261956e3d
--- /dev/null
+++ b/include/asm-sh/sh_bios.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SH_BIOS_H
+#define __ASM_SH_BIOS_H
+
+/*
+ * Copyright (C) 2000 Greg Banks, Mitch Davis
+ * C API to interface to the standard LinuxSH BIOS
+ * usually from within the early stages of kernel boot.
+ */
+
+
+extern void sh_bios_console_write(const char *buf, unsigned int len);
+extern void sh_bios_char_out(char ch);
+extern int sh_bios_in_gdb_mode(void);
+extern void sh_bios_gdb_detach(void);
+
+extern void sh_bios_get_node_addr(unsigned char *node_addr);
+extern void sh_bios_shutdown(unsigned int how);
+
+#endif /* __ASM_SH_BIOS_H */
diff --git a/include/asm-sh/shmbuf.h b/include/asm-sh/shmbuf.h
new file mode 100644
index 000000000000..b2101f490521
--- /dev/null
+++ b/include/asm-sh/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_SHMBUF_H
+#define __ASM_SH_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SHMBUF_H */
diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h
new file mode 100644
index 000000000000..0a95604b9b66
--- /dev/null
+++ b/include/asm-sh/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_SHMPARAM_H
+#define __ASM_SH_SHMPARAM_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/shmparam.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h
new file mode 100644
index 000000000000..eb8effba2e80
--- /dev/null
+++ b/include/asm-sh/sigcontext.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_SIGCONTEXT_H
+#define __ASM_SH_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+#if defined(__SH4__) || defined(CONFIG_CPU_SH4)
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+#endif
+};
+
+#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/include/asm-sh/siginfo.h b/include/asm-sh/siginfo.h
new file mode 100644
index 000000000000..813040ed68a9
--- /dev/null
+++ b/include/asm-sh/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_SIGINFO_H
+#define __ASM_SH_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __ASM_SH_SIGINFO_H */
diff --git a/include/asm-sh/signal.h b/include/asm-sh/signal.h
new file mode 100644
index 000000000000..0a7ff717c245
--- /dev/null
+++ b/include/asm-sh/signal.h
@@ -0,0 +1,185 @@
+#ifndef __ASM_SH_SIGNAL_H
+#define __ASM_SH_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct pt_regs;
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_SIGNAL_H */
diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h
new file mode 100644
index 000000000000..38b54469d7d1
--- /dev/null
+++ b/include/asm-sh/smp.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-sh/smp.h
+ *
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_SMP_H
+#define __ASM_SH_SMP_H
+
+#include <linux/config.h>
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+
+#ifdef CONFIG_SMP
+
+#include <asm/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/current.h>
+
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_possible_map;
+
+#define cpu_online(cpu)		cpu_isset(cpu, cpu_online_map)
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+/* I've no idea what the real meaning of this is */
+#define PROC_CHANGE_PENALTY	20
+
+#define NO_PROC_ID	(-1)
+
+struct smp_fn_call_struct {
+	spinlock_t lock;
+	atomic_t   finished;
+	void (*fn)(void *);
+	void *data;
+};
+
+extern struct smp_fn_call_struct smp_fn_call;
+
+#define SMP_MSG_RESCHEDULE	0x0001
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_H */
diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear/io.h
new file mode 100644
index 000000000000..bfa97ac06280
--- /dev/null
+++ b/include/asm-sh/snapgear/io.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-sh/snapgear/io.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#if defined(CONFIG_CPU_SH4)
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt.  In fact the priority
+ * is the interrupt :-)
+ */
+
+#define IRL0_IRQ		2
+#define IRL0_IPR_ADDR	INTC_IPRD
+#define IRL0_IPR_POS	3
+#define IRL0_PRIORITY	13
+
+#define IRL1_IRQ		5
+#define IRL1_IPR_ADDR	INTC_IPRD
+#define IRL1_IPR_POS	2
+#define IRL1_PRIORITY	10
+
+#define IRL2_IRQ		8
+#define IRL2_IPR_ADDR	INTC_IPRD
+#define IRL2_IPR_POS	1
+#define IRL2_PRIORITY	7
+
+#define IRL3_IRQ		11
+#define IRL3_IPR_ADDR	INTC_IPRD
+#define IRL3_IPR_POS	0
+#define IRL3_PRIORITY	4
+#endif
+
+extern unsigned char snapgear_inb(unsigned long port);
+extern unsigned short snapgear_inw(unsigned long port);
+extern unsigned int snapgear_inl(unsigned long port);
+
+extern void snapgear_outb(unsigned char value, unsigned long port);
+extern void snapgear_outw(unsigned short value, unsigned long port);
+extern void snapgear_outl(unsigned int value, unsigned long port);
+
+extern unsigned char snapgear_inb_p(unsigned long port);
+extern void snapgear_outb_p(unsigned char value, unsigned long port);
+
+extern void snapgear_insl(unsigned long port, void *addr, unsigned long count);
+extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long snapgear_isa_port2addr(unsigned long offset);
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+ #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+ extern unsigned short secureedge5410_ioport;
+
+ #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+		 (secureedge5410_ioport = \
+		 		((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+ #define SECUREEDGE_READ_IOPORT() \
+ 		 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+#endif
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/include/asm-sh/socket.h b/include/asm-sh/socket.h
new file mode 100644
index 000000000000..dde696c3b4c7
--- /dev/null
+++ b/include/asm-sh/socket.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_SH_SOCKET_H
+#define __ASM_SH_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* __ASM_SH_SOCKET_H */
diff --git a/include/asm-sh/sockios.h b/include/asm-sh/sockios.h
new file mode 100644
index 000000000000..08a71df8a8be
--- /dev/null
+++ b/include/asm-sh/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_SOCKIOS_H
+#define __ASM_SH_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp - linux-specific */
+#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h
new file mode 100644
index 000000000000..e770b55649eb
--- /dev/null
+++ b/include/asm-sh/spinlock.h
@@ -0,0 +1,124 @@
+/*
+ * include/asm-sh/spinlock.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_H
+#define __ASM_SH_SPINLOCK_H
+
+#include <asm/atomic.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+typedef struct {
+	volatile unsigned long lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0 }
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+#define spin_is_locked(x)	((x)->lock != 0)
+#define spin_unlock_wait(x)	do { barrier(); } while (spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	__asm__ __volatile__ (
+		"1:\n\t"
+		"tas.b @%0\n\t"
+		"bf/s 1b\n\t"
+		"nop\n\t"
+		: "=r" (lock->lock)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	assert_spin_locked(lock);
+
+	lock->lock = 0;
+}
+
+#define _raw_spin_trylock(x) (!test_and_set_bit(0, &(x)->lock))
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	spinlock_t lock;
+	atomic_t counter;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_BIAS		0x01000000
+#define RW_LOCK_UNLOCKED	(rwlock_t) { { 0 }, { RW_LOCK_BIAS } }
+#define rwlock_init(x)		do { *(x) = RW_LOCK_UNLOCKED; } while (0)
+
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+	_raw_spin_lock(&rw->lock);
+
+	atomic_inc(&rw->counter);
+
+	_raw_spin_unlock(&rw->lock);
+}
+
+static inline void _raw_read_unlock(rwlock_t *rw)
+{
+	_raw_spin_lock(&rw->lock);
+
+	atomic_dec(&rw->counter);
+
+	_raw_spin_unlock(&rw->lock);
+}
+
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+	_raw_spin_lock(&rw->lock);
+	atomic_set(&rw->counter, -1);
+}
+
+static inline void _raw_write_unlock(rwlock_t *rw)
+{
+	atomic_set(&rw->counter, 0);
+	_raw_spin_unlock(&rw->lock);
+}
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+static inline int _raw_write_trylock(rwlock_t *rw)
+{
+	if (atomic_sub_and_test(RW_LOCK_BIAS, &rw->counter))
+		return 1;
+	
+	atomic_add(RW_LOCK_BIAS, &rw->counter);
+
+	return 0;
+}
+
+#endif /* __ASM_SH_SPINLOCK_H */
+
diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h
new file mode 100644
index 000000000000..914e3fcbbd37
--- /dev/null
+++ b/include/asm-sh/stat.h
@@ -0,0 +1,84 @@
+#ifndef __ASM_SH_STAT_H
+#define __ASM_SH_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#define STAT_HAVE_NSEC 1
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+#if defined(__BIG_ENDIAN__)
+	unsigned long	__pad4;		/* Future possible st_blocks hi bits */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+#else /* Must be little */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* Future possible st_blocks hi bits */
+#endif
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec; 
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* __ASM_SH_STAT_H */
diff --git a/include/asm-sh/statfs.h b/include/asm-sh/statfs.h
new file mode 100644
index 000000000000..9202a023328f
--- /dev/null
+++ b/include/asm-sh/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_STATFS_H
+#define __ASM_SH_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_SH_STATFS_H */
diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h
new file mode 100644
index 000000000000..3e0cff04caec
--- /dev/null
+++ b/include/asm-sh/string.h
@@ -0,0 +1,127 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ */
+
+#define __HAVE_ARCH_STRCPY
+static __inline__ char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+			     "mov.b	@%1+, %2\n\t"
+			     "mov.b	%2, @%0\n\t"
+			     "cmp/eq	#0, %2\n\t"
+			     "bf/s	1b\n\t"
+			     " add	#1, %0\n\t"
+			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+			     : "0" (__dest), "1" (__src)
+			     : "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static __inline__ char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n"
+		"mov.b	@%1+, %2\n\t"
+		"mov.b	%2, @%0\n\t"
+		"cmp/eq	#0, %2\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq	%5,%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static __inline__ int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq #0, %3\n\t"
+		"bt	2f\n\t"
+		"cmp/eq %2, %3\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n\t"
+		"sub	%3, %2\n"
+		"2:"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static __inline__ int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return 0;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq %6, %0\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq #0, %3\n\t"
+		"bt/s	3f\n\t"
+		" cmp/eq %3, %2\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n"
+		"2:\n\t"
+		"sub	%3, %2\n"
+		"3:"
+		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#endif /* __ASM_SH_STRING_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
new file mode 100644
index 000000000000..28a3c2d8bcd7
--- /dev/null
+++ b/include/asm-sh/system.h
@@ -0,0 +1,264 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+
+#include <linux/config.h>
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+
+#define switch_to(prev, next, last) do {				\
+ task_t *__last;							\
+ register unsigned long *__ts1 __asm__ ("r1") = &prev->thread.sp;	\
+ register unsigned long *__ts2 __asm__ ("r2") = &prev->thread.pc;	\
+ register unsigned long *__ts4 __asm__ ("r4") = (unsigned long *)prev;	\
+ register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next;	\
+ register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp;	\
+ register unsigned long __ts7 __asm__ ("r7") = next->thread.pc;		\
+ __asm__ __volatile__ (".balign 4\n\t" 					\
+		       "stc.l	gbr, @-r15\n\t" 			\
+		       "sts.l	pr, @-r15\n\t" 				\
+		       "mov.l	r8, @-r15\n\t" 				\
+		       "mov.l	r9, @-r15\n\t" 				\
+		       "mov.l	r10, @-r15\n\t" 			\
+		       "mov.l	r11, @-r15\n\t" 			\
+		       "mov.l	r12, @-r15\n\t" 			\
+		       "mov.l	r13, @-r15\n\t" 			\
+		       "mov.l	r14, @-r15\n\t" 			\
+		       "mov.l	r15, @r1	! save SP\n\t"		\
+		       "mov.l	@r6, r15	! change to new stack\n\t" \
+		       "mova	1f, %0\n\t" 				\
+		       "mov.l	%0, @r2		! save PC\n\t" 		\
+		       "mov.l	2f, %0\n\t" 				\
+		       "jmp	@%0		! call __switch_to\n\t" \
+		       " lds	r7, pr		!  with return to new PC\n\t" \
+		       ".balign	4\n"					\
+		       "2:\n\t"						\
+		       ".long	__switch_to\n"				\
+		       "1:\n\t"						\
+		       "mov.l	@r15+, r14\n\t"				\
+		       "mov.l	@r15+, r13\n\t"				\
+		       "mov.l	@r15+, r12\n\t"				\
+		       "mov.l	@r15+, r11\n\t"				\
+		       "mov.l	@r15+, r10\n\t"				\
+		       "mov.l	@r15+, r9\n\t"				\
+		       "mov.l	@r15+, r8\n\t"				\
+		       "lds.l	@r15+, pr\n\t"				\
+		       "ldc.l	@r15+, gbr\n\t"				\
+		       : "=z" (__last)					\
+		       : "r" (__ts1), "r" (__ts2), "r" (__ts4), 	\
+			 "r" (__ts5), "r" (__ts6), "r" (__ts7) 		\
+		       : "r3", "t");					\
+	last = __last;							\
+} while (0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+static __inline__ unsigned long tas(volatile int *m)
+{ /* #define tas(ptr) (xchg((ptr),1)) */
+	unsigned long retval;
+
+	__asm__ __volatile__ ("tas.b	@%1\n\t"
+			      "movt	%0"
+			      : "=r" (retval): "r" (m): "t", "memory");
+	return retval;
+}
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define mb()	__asm__ __volatile__ ("": : :"memory")
+#define rmb()	mb()
+#define wmb()	__asm__ __volatile__ ("": : :"memory")
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/* Interrupt Control */
+static __inline__ void local_irq_enable(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "stc	r6_bank, %1\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy0), "=r" (__dummy1)
+			     : "1" (~0x000000f0)
+			     : "memory");
+}
+
+static __inline__ void local_irq_disable(void)
+{
+	unsigned long __dummy;
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	#0xf0, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&z" (__dummy)
+			     : /* no inputs */
+			     : "memory");
+}
+
+#define local_save_flags(x) \
+	__asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" )
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	(flags != 0);			\
+})
+
+static __inline__ unsigned long local_irq_save(void)
+{
+	unsigned long flags, __dummy;
+
+	__asm__ __volatile__("stc	sr, %1\n\t"
+			     "mov	%1, %0\n\t"
+			     "or	#0xf0, %0\n\t"
+			     "ldc	%0, sr\n\t"
+			     "mov	%1, %0\n\t"
+			     "and	#0xf0, %0"
+			     : "=&z" (flags), "=&r" (__dummy)
+			     :/**/
+			     : "memory" );
+	return flags;
+}
+
+#ifdef DEBUG_CLI_STI
+static __inline__ void  local_irq_restore(unsigned long x)
+{
+	if ((x & 0x000000f0) != 0x000000f0)
+		local_irq_enable();
+	else {
+		unsigned long flags;
+		local_save_flags(flags);
+
+		if (flags == 0) {
+			extern void dump_stack(void);
+			printk(KERN_ERR "BUG!\n");
+			dump_stack();
+			local_irq_disable();
+		}
+	}
+}
+#else
+#define local_irq_restore(x) do { 			\
+	if ((x & 0x000000f0) != 0x000000f0)		\
+		local_irq_enable();				\
+} while (0)
+#endif
+
+#define really_restore_flags(x) do { 			\
+	if ((x & 0x000000f0) != 0x000000f0)		\
+		local_irq_enable();				\
+	else						\
+		local_irq_disable();				\
+} while (0)
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2()			\
+do {					\
+	unsigned long __dummy;		\
+	__asm__ __volatile__(		\
+		"mov.l	1f, %0\n\t"	\
+		"or	%1, %0\n\t"	\
+		"jmp	@%0\n\t"	\
+		" nop\n\t" 		\
+		".balign 4\n"		\
+		"1:	.long 2f\n"	\
+		"2:"			\
+		: "=&r" (__dummy)	\
+		: "r" (0x20000000));	\
+} while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1()					\
+do {							\
+	unsigned long __dummy;				\
+	__asm__ __volatile__(				\
+		"nop;nop;nop;nop;nop;nop;nop\n\t"	\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
+
+/* For spinlocks etc */
+#define local_irq_save(x)	x = local_irq_save()
+
+static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ unsigned long xchg_u8(volatile unsigned char * m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+		break;
+	case 1:
+		return xchg_u8(ptr, x);
+		break;
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* XXX
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/include/asm-sh/systemh/7751systemh.h b/include/asm-sh/systemh/7751systemh.h
new file mode 100644
index 000000000000..4170531bdbd9
--- /dev/null
+++ b/include/asm-sh/systemh/7751systemh.h
@@ -0,0 +1,68 @@
+#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
+#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
+
+/*
+ * linux/include/asm-sh/systemh/7751systemh.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH support
+
+ * Modified for 7751 SystemH by
+ * Jonathan Short, 2002.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controler */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/include/asm-sh/systemh/io.h b/include/asm-sh/systemh/io.h
new file mode 100644
index 000000000000..327849b49db8
--- /dev/null
+++ b/include/asm-sh/systemh/io.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/systemh/io.h
+ *
+ * Stupid I/O definitions for SystemH, cloned from SE7751.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SYSTEMH_IO_H
+#define __ASM_SH_SYSTEMH_IO_H
+
+extern unsigned char sh7751systemh_inb(unsigned long port);
+extern unsigned short sh7751systemh_inw(unsigned long port);
+extern unsigned int sh7751systemh_inl(unsigned long port);
+
+extern void sh7751systemh_outb(unsigned char value, unsigned long port);
+extern void sh7751systemh_outw(unsigned short value, unsigned long port);
+extern void sh7751systemh_outl(unsigned int value, unsigned long port);
+
+extern unsigned char sh7751systemh_inb_p(unsigned long port);
+extern void sh7751systemh_outb_p(unsigned char value, unsigned long port);
+
+extern void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count);
+extern void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned char sh7751systemh_readb(unsigned long addr);
+extern unsigned short sh7751systemh_readw(unsigned long addr);
+extern unsigned int sh7751systemh_readl(unsigned long addr);
+extern void sh7751systemh_writeb(unsigned char b, unsigned long addr);
+extern void sh7751systemh_writew(unsigned short b, unsigned long addr);
+extern void sh7751systemh_writel(unsigned int b, unsigned long addr);
+
+extern unsigned long sh7751systemh_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_SYSTEMH_IO_H */
+
diff --git a/include/asm-sh/termbits.h b/include/asm-sh/termbits.h
new file mode 100644
index 000000000000..4f9822a8e7b4
--- /dev/null
+++ b/include/asm-sh/termbits.h
@@ -0,0 +1,173 @@
+#ifndef __ASM_SH_TERMBITS_H
+#define __ASM_SH_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_SH_TERMBITS_H */
diff --git a/include/asm-sh/termios.h b/include/asm-sh/termios.h
new file mode 100644
index 000000000000..44edfd471443
--- /dev/null
+++ b/include/asm-sh/termios.h
@@ -0,0 +1,106 @@
+#ifndef __ASM_SH_TERMIOS_H
+#define __ASM_SH_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_SH_TERMIOS_H */
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
new file mode 100644
index 000000000000..d82f883d8e6d
--- /dev/null
+++ b/include/asm-sh/thread_info.h
@@ -0,0 +1,102 @@
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			flags;		/* low level flags */
+	__u32			cpu;
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+	struct restart_block	restart_block;
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("stc	r7_bank, %0" : "=r" (ti));
+	return ti;
+}
+
+/* thread information allocation */
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+	stc	r7_bank, reg
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_USERSPACE		31	/* true if FS sets userspace */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_USERSPACE		(1<<TIF_USERSPACE)
+
+#define _TIF_WORK_MASK		0x000000FE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x000000FF	/* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/include/asm-sh/timex.h b/include/asm-sh/timex.h
new file mode 100644
index 000000000000..a873e24113cf
--- /dev/null
+++ b/include/asm-sh/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-sh/timex.h
+ *
+ * sh architecture timex specifications
+ */
+#ifndef __ASM_SH_TIMEX_H
+#define __ASM_SH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif /* __ASM_SH_TIMEX_H */
diff --git a/include/asm-sh/tlb.h b/include/asm-sh/tlb.h
new file mode 100644
index 000000000000..53d185bcf872
--- /dev/null
+++ b/include/asm-sh/tlb.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_TLB_H
+#define __ASM_SH_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma)	\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+
+/*
+ * Flush whole TLBs for MM
+ */
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+#endif
diff --git a/include/asm-sh/tlbflush.h b/include/asm-sh/tlbflush.h
new file mode 100644
index 000000000000..28c073b0fbab
--- /dev/null
+++ b/include/asm-sh/tlbflush.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_TLBFLUSH_H
+#define __ASM_SH_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+extern void flush_tlb(void);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void __flush_tlb_page(unsigned long asid, unsigned long page);
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{ /* Nothing to do */
+}
+
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h
new file mode 100644
index 000000000000..cff001c316fe
--- /dev/null
+++ b/include/asm-sh/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SH_TOPOLOGY_H
+#define _ASM_SH_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
new file mode 100644
index 000000000000..c4dc126c5621
--- /dev/null
+++ b/include/asm-sh/types.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_TYPES_H */
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
new file mode 100644
index 000000000000..fb9e334afa2b
--- /dev/null
+++ b/include/asm-sh/uaccess.h
@@ -0,0 +1,600 @@
+/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+/*
+ * NOTE: Macro/functions in this file depends on threads_info.h implementation.
+ * Assumes:
+ * TI_FLAGS == 8
+ * TIF_USERSPACE == 31
+ * USER_ADDR_LIMIT == 0x80000000
+ */
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+typedef struct {
+	unsigned int is_user_space;
+} mm_segment_t;
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define segment_eq(a,b)	((a).is_user_space == (b).is_user_space)
+
+#define USER_ADDR_LIMIT	0x80000000
+
+#define KERNEL_DS	MAKE_MM_SEG(0)
+#define USER_DS		MAKE_MM_SEG(1)
+
+#define get_ds()	(KERNEL_DS)
+
+#if !defined(CONFIG_MMU)
+static inline mm_segment_t get_fs(void)
+{
+	return USER_DS;
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+}
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * If we don't have an MMU (or if its disabled) the only thing we really have
+ * to look out for is if the address resides somewhere outside of what
+ * available RAM we have.
+ *
+ * TODO: This check could probably also stand to be restricted somewhat more..
+ * though it still does the Right Thing(tm) for the time being.
+ */
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	extern unsigned long memory_start, memory_end;
+
+	return ((addr >= memory_start) && ((addr + size) < memory_end));
+}
+#else /* CONFIG_MMU */
+static inline mm_segment_t get_fs(void)
+{
+	return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE));
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+	unsigned long ti, flag;
+	__asm__ __volatile__(
+		"stc	r7_bank, %0\n\t"
+		"mov.l	@(8,%0), %1\n\t"
+		"shal	%1\n\t"
+		"cmp/pl	%2\n\t"
+		"rotcr	%1\n\t"
+		"mov.l	%1, @(8,%0)"
+		: "=&r" (ti), "=&r" (flag)
+		: "r" (s.is_user_space)
+		: "t");
+/****
+	if (s.is_user_space)
+		set_thread_flag(TIF_USERSPACE);
+	else
+		clear_thread_flag(TIF_USERSPACE);
+****/
+}
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * We do three checks:
+ * (1) is it user space? 
+ * (2) addr + size --> carry?
+ * (3) addr + size >= 0x80000000  (USER_ADDR_LIMIT)
+ *
+ * (1) (2) (3) | RESULT
+ *  0   0   0  |  ok
+ *  0   0   1  |  ok
+ *  0   1   0  |  bad
+ *  0   1   1  |  bad
+ *  1   0   0  |  ok
+ *  1   0   1  |  bad
+ *  1   1   0  |  bad
+ *  1   1   1  |  bad
+ */
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	unsigned long flag, tmp;
+
+	__asm__("stc	r7_bank, %0\n\t"
+		"mov.l	@(8,%0), %0\n\t"
+		"clrt\n\t"
+		"addc	%2, %1\n\t"
+		"and	%1, %0\n\t"
+		"rotcl	%0\n\t"
+		"rotcl	%0\n\t"
+		"and	#3, %0"
+		: "=&z" (flag), "=r" (tmp)
+		: "r" (addr), "1" (size)
+		: "t");
+
+	return flag == 0;
+}
+#endif /* CONFIG_MMU */
+
+static inline int access_ok(int type, const void __user *p, unsigned long size)
+{
+	unsigned long addr = (unsigned long)p;
+	return __access_ok(addr, size);
+}
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "b");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "w");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "l");		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err, __gu_val;				\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)				\
+({								\
+	long __gu_err, __gu_val;				\
+	switch (size) {						\
+	case 1:							\
+		__get_user_1(__gu_val, (ptr), __gu_err);	\
+		break;						\
+	case 2:							\
+		__get_user_2(__gu_val, (ptr), __gu_err);	\
+		break;						\
+	case 4:							\
+		__get_user_4(__gu_val, (ptr), __gu_err);	\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+								\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_1(x,addr,err) ({		\
+__asm__("stc	r7_bank, %1\n\t"		\
+	"mov.l	@(8,%1), %1\n\t"		\
+	"and	%2, %1\n\t"			\
+	"cmp/pz	%1\n\t"				\
+	"bt/s	1f\n\t"				\
+	" mov	#0, %0\n\t"			\
+	"0:\n"					\
+	"mov	#-14, %0\n\t"			\
+	"bra	2f\n\t"				\
+	" mov	#0, %1\n"			\
+	"1:\n\t"				\
+	"mov.b	@%2, %1\n\t"			\
+	"extu.b	%1, %1\n"			\
+	"2:\n"					\
+	".section	__ex_table,\"a\"\n\t"	\
+	".long	1b, 0b\n\t"			\
+	".previous"				\
+	: "=&r" (err), "=&r" (x)		\
+	: "r" (addr)				\
+	: "t");					\
+})
+
+#define __get_user_2(x,addr,err) ({		\
+__asm__("stc	r7_bank, %1\n\t"		\
+	"mov.l	@(8,%1), %1\n\t"		\
+	"and	%2, %1\n\t"			\
+	"cmp/pz	%1\n\t"				\
+	"bt/s	1f\n\t"				\
+	" mov	#0, %0\n\t"			\
+	"0:\n"					\
+	"mov	#-14, %0\n\t"			\
+	"bra	2f\n\t"				\
+	" mov	#0, %1\n"			\
+	"1:\n\t"				\
+	"mov.w	@%2, %1\n\t"			\
+	"extu.w	%1, %1\n"			\
+	"2:\n"					\
+	".section	__ex_table,\"a\"\n\t"	\
+	".long	1b, 0b\n\t"			\
+	".previous"				\
+	: "=&r" (err), "=&r" (x)		\
+	: "r" (addr)				\
+	: "t");					\
+})
+
+#define __get_user_4(x,addr,err) ({		\
+__asm__("stc	r7_bank, %1\n\t"		\
+	"mov.l	@(8,%1), %1\n\t"		\
+	"and	%2, %1\n\t"			\
+	"cmp/pz	%1\n\t"				\
+	"bt/s	1f\n\t"				\
+	" mov	#0, %0\n\t"			\
+	"0:\n"					\
+	"mov	#-14, %0\n\t"			\
+	"bra	2f\n\t"				\
+	" mov	#0, %1\n"			\
+	"1:\n\t"				\
+	"mov.l	@%2, %1\n\t"			\
+	"2:\n"					\
+	".section	__ex_table,\"a\"\n\t"	\
+	".long	1b, 0b\n\t"			\
+	".previous"				\
+	: "=&r" (err), "=&r" (x)		\
+	: "r" (addr)				\
+	: "t");					\
+})
+
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%2, %1\n\t" \
+	"mov	#0, %0\n" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov	#0, %1\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT)); })
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "b");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "w");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "l");	\
+		break;					\
+	case 8:						\
+		__put_user_u64(x, ptr, retval);		\
+		break;					\
+	default:					\
+		__put_user_unknown();			\
+	}						\
+} while (0)
+
+#define __put_user_nocheck(x,ptr,size)			\
+({							\
+	long __pu_err;					\
+	__put_user_size((x),(ptr),(size),__pu_err);	\
+	__pu_err;					\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) *__pu_addr = (ptr);			\
+								\
+	if (__access_ok((unsigned long)__pu_addr,size))		\
+		__put_user_size((x),__pu_addr,(size),__pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%1, %2\n\t" \
+	"mov	#0, %0\n" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"nop\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	"mov	%3, %0\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err) \
+	:"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
+        :"memory"); })
+
+#if defined(__LITTLE_ENDIAN__)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%R1,%2\n\t" \
+	"mov.l	%S1,%T2\n\t" \
+	"mov	#0,%0\n" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"nop\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%S1,%2\n\t" \
+	"mov.l	%R1,%T2\n\t" \
+	"mov	#0,%0\n" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"nop\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+extern __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+#define copy_to_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define __copy_to_user(to,from,n)		\
+	__copy_user((void *)(to),		\
+		    (void *)(from), n)
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+
+#define copy_from_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+void *__copy_from = (void *) (from); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define __copy_from_user(to,from,n)		\
+	__copy_user((void *)(to),		\
+		    (void *)(from), n)
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n) ({ \
+void * __cl_addr = (addr); \
+unsigned long __cl_size = (n); \
+if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
+__cl_size = __clear_user(__cl_addr, __cl_size); \
+__cl_size; })
+
+static __inline__ int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+	__kernel_size_t res;
+	unsigned long __dummy, _d, _s;
+
+	__asm__ __volatile__(
+		"9:\n"
+		"mov.b	@%2+, %1\n\t"
+		"cmp/eq	#0, %1\n\t"
+		"bt/s	2f\n"
+		"1:\n"
+		"mov.b	%1, @%3\n\t"
+		"dt	%7\n\t"
+		"bf/s	9b\n\t"
+		" add	#1, %3\n\t"
+		"2:\n\t"
+		"sub	%7, %0\n"
+		"3:\n"
+		".section .fixup,\"ax\"\n"
+		"4:\n\t"
+		"mov.l	5f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	%8, %0\n\t"
+		".balign 4\n"
+		"5:	.long 3b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 9b,4b\n"
+		".previous"
+		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
+		: "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
+		  "i" (-EFAULT)
+		: "memory", "t");
+
+	return res;
+}
+
+#define strncpy_from_user(dest,src,count) ({ \
+unsigned long __sfu_src = (unsigned long) (src); \
+int __sfu_count = (int) (count); \
+long __sfu_res = -EFAULT; \
+if(__access_ok(__sfu_src, __sfu_count)) { \
+__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
+} __sfu_res; })
+
+/*
+ * Return the size of a string (including the ending 0!)
+ */
+static __inline__ long __strnlen_user(const char __user *__s, long __n)
+{
+	unsigned long res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"9:\n"
+		"cmp/eq	%4, %0\n\t"
+		"bt	2f\n"
+		"1:\t"
+		"mov.b	@(%0,%3), %1\n\t"
+		"tst	%1, %1\n\t"
+		"bf/s	9b\n\t"
+		" add	#1, %0\n"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	%5, %0\n"
+		".balign 4\n"
+		"4:	.long 2b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 1b,3b\n"
+		".previous"
+		: "=z" (res), "=&r" (__dummy)
+		: "0" (0), "r" (__s), "r" (__n), "i" (-EFAULT)
+		: "t");
+	return res;
+}
+
+static __inline__ long strnlen_user(const char __user *s, long n)
+{
+	if (!access_ok(VERIFY_READ, s, n))
+		return 0;
+	else
+		return __strnlen_user(s, n);
+}
+
+static __inline__ long strlen_user(const char __user *s)
+{
+	if (!access_ok(VERIFY_READ, s, 0))
+		return 0;
+	else
+		return __strnlen_user(s, ~0UL >> 1);
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h
new file mode 100644
index 000000000000..694f51f47941
--- /dev/null
+++ b/include/asm-sh/ubc.h
@@ -0,0 +1,60 @@
+/*
+ * include/asm-sh/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_UBC_H
+#define __ASM_SH_UBC_H
+#ifdef __KERNEL__
+
+#include <asm/cpu/ubc.h>
+
+/* User Break Controller */
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7300)
+#define UBC_TYPE_SH7729	(cpu_data->type == CPU_SH7729)
+#else
+#define UBC_TYPE_SH7729	0
+#endif
+
+#define BAMR_ASID		(1 << 2)
+#define BAMR_NONE		0
+#define BAMR_10			0x1
+#define BAMR_12			0x2
+#define BAMR_ALL		0x3
+#define BAMR_16			0x8
+#define BAMR_20			0x9
+
+#define BBR_INST		(1 << 4)
+#define BBR_DATA		(2 << 4)
+#define BBR_READ		(1 << 2)
+#define BBR_WRITE		(2 << 2)
+#define BBR_BYTE		0x1
+#define BBR_HALF		0x2
+#define BBR_LONG		0x3
+#define BBR_QUAD		(1 << 6)	/* SH7750 */
+#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
+#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
+
+#define BRCR_CMFA		(1 << 15)
+#define BRCR_CMFB		(1 << 14)
+#define BRCR_PCTE		(1 << 11)
+#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
+#define BRCR_DBEB		(1 << 7)
+#define BRCR_PCBB		(1 << 6)
+#define BRCR_SEQ		(1 << 3)
+#define BRCR_UBDE		(1 << 0)
+
+#ifndef __ASSEMBLY__
+/* arch/sh/kernel/ubc.S */
+extern void ubc_wakeup(void);
+extern void ubc_sleep(void);
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/ucontext.h b/include/asm-sh/ucontext.h
new file mode 100644
index 000000000000..202ef1d5a3c4
--- /dev/null
+++ b/include/asm-sh/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_SH_UCONTEXT_H
+#define __ASM_SH_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_SH_UCONTEXT_H */
diff --git a/include/asm-sh/unaligned.h b/include/asm-sh/unaligned.h
new file mode 100644
index 000000000000..5250e3063b42
--- /dev/null
+++ b/include/asm-sh/unaligned.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_UNALIGNED_H
+#define __ASM_SH_UNALIGNED_H
+
+/* SH can't handle unaligned accesses. */
+#include <asm-generic/unaligned.h>
+
+#endif /* __ASM_SH_UNALIGNED_H */
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
new file mode 100644
index 000000000000..245447081f0d
--- /dev/null
+++ b/include/asm-sh/unistd.h
@@ -0,0 +1,523 @@
+#ifndef __ASM_SH_UNISTD_H
+#define __ASM_SH_UNISTD_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit	 	 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_sys_kexec_load	283
+#define __NR_waitid		284
+#define __NR_add_key		285
+#define __NR_request_key	286
+#define __NR_keyctl		287
+
+#define NR_syscalls 288
+
+/* user-visible error numbers are in the range -1 - -124: see <asm-sh/errno.h> */
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-124)) { \
+	/* Avoid using "res" which is declared to be in register r0; \
+	   errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+register long __sc0 __asm__ ("r3") = __NR_##name; \
+__asm__ __volatile__ ("trapa	#0x10" \
+	: "=z" (__sc0) \
+	: "0" (__sc0) \
+	: "memory" ); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+register long __sc0 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+__asm__ __volatile__ ("trapa	#0x11" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4) \
+	: "memory"); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+register long __sc0 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+register long __sc5 __asm__ ("r5") = (long) arg2; \
+__asm__ __volatile__ ("trapa	#0x12" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4), "r" (__sc5) \
+	: "memory"); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+register long __sc0 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+register long __sc5 __asm__ ("r5") = (long) arg2; \
+register long __sc6 __asm__ ("r6") = (long) arg3; \
+__asm__ __volatile__ ("trapa	#0x13" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6) \
+	: "memory"); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+register long __sc0 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+register long __sc5 __asm__ ("r5") = (long) arg2; \
+register long __sc6 __asm__ ("r6") = (long) arg3; \
+register long __sc7 __asm__ ("r7") = (long) arg4; \
+__asm__ __volatile__ ("trapa	#0x14" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6),  \
+	  "r" (__sc7) \
+	: "memory" ); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
+{ \
+register long __sc3 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+register long __sc5 __asm__ ("r5") = (long) arg2; \
+register long __sc6 __asm__ ("r6") = (long) arg3; \
+register long __sc7 __asm__ ("r7") = (long) arg4; \
+register long __sc0 __asm__ ("r0") = (long) arg5; \
+__asm__ __volatile__ ("trapa	#0x15" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6), "r" (__sc7),  \
+	  "r" (__sc3) \
+	: "memory" ); \
+__syscall_return(type,__sc0); \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
+{ \
+register long __sc3 __asm__ ("r3") = __NR_##name; \
+register long __sc4 __asm__ ("r4") = (long) arg1; \
+register long __sc5 __asm__ ("r5") = (long) arg2; \
+register long __sc6 __asm__ ("r6") = (long) arg3; \
+register long __sc7 __asm__ ("r7") = (long) arg4; \
+register long __sc0 __asm__ ("r0") = (long) arg5; \
+register long __sc1 __asm__ ("r1") = (long) arg6; \
+__asm__ __volatile__ ("trapa	#0x15" \
+	: "=z" (__sc0) \
+	: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6), "r" (__sc7),  \
+	  "r" (__sc3), "r" (__sc1) \
+	: "memory" ); \
+__syscall_return(type,__sc0); \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static __inline__ _syscall0(int,pause)
+static __inline__ _syscall0(int,sync)
+static __inline__ _syscall0(pid_t,setsid)
+static __inline__ _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static __inline__ _syscall1(int,dup,int,fd)
+static __inline__ _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static __inline__ _syscall3(int,open,const char *,file,int,flag,int,mode)
+static __inline__ _syscall1(int,close,int,fd)
+static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static __inline__ _syscall1(int,delete_module,const char *,name)
+
+static __inline__ pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+
+asmlinkage long sys_mmap2(
+			unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(char *ufilename, char **uargv,
+			char **uenvp, unsigned long r7,
+			struct pt_regs regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			unsigned long parent_tidptr,
+			unsigned long child_tidptr,
+			struct pt_regs regs);
+asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs regs);
+asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs regs);
+asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs regs);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char *buf,
+				size_t count, long dummy, loff_t pos);
+asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char *buf,
+				size_t count, long dummy, loff_t pos);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __ASM_SH_UNISTD_H */
diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h
new file mode 100644
index 000000000000..d1b8511d9d9f
--- /dev/null
+++ b/include/asm-sh/user.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_SH_USER_H
+#define __ASM_SH_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+struct user_fpu_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+};
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
+	int u_fpvalid;		/* True if math co-processor being used */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_SH_USER_H */
diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h
new file mode 100644
index 000000000000..f0cf4be21655
--- /dev/null
+++ b/include/asm-sh/watchdog.h
@@ -0,0 +1,111 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/config.h>
+#include <asm/cpu/watchdog.h>
+#include <asm/io.h>
+
+/* 
+ * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R	WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R	WTCSR
+#endif
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
+#define WTCSR_CKS_4096	0x07
+
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ *
+ * 	Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+	return ctrl_inb(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+	return ctrl_inb(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ *
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sh/xor.h b/include/asm-sh/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/include/asm-sh/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-sh64/a.out.h b/include/asm-sh64/a.out.h
new file mode 100644
index 000000000000..e1995e86b663
--- /dev/null
+++ b/include/asm-sh64/a.out.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SH64_A_OUT_H
+#define __ASM_SH64_A_OUT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/a.out.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP	TASK_SIZE
+
+#endif
+
+#endif /* __ASM_SH64_A_OUT_H */
diff --git a/include/asm-sh64/atomic.h b/include/asm-sh64/atomic.h
new file mode 100644
index 000000000000..8c3872d3e65f
--- /dev/null
+++ b/include/asm-sh64/atomic.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_SH64_ATOMIC_H
+#define __ASM_SH64_ATOMIC_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/atomic.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		((v)->counter = (i))
+
+#include <asm/system.h>
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v += i;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v -= i;
+	local_irq_restore(flags);
+}
+
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic_dec(v) atomic_sub(1,(v))
+
+static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v &= ~mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v |= mask;
+	local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing on SH */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __ASM_SH64_ATOMIC_H */
diff --git a/include/asm-sh64/bitops.h b/include/asm-sh64/bitops.h
new file mode 100644
index 000000000000..e1ff63e09227
--- /dev/null
+++ b/include/asm-sh64/bitops.h
@@ -0,0 +1,516 @@
+#ifndef __ASM_SH64_BITOPS_H
+#define __ASM_SH64_BITOPS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/bitops.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <asm/system.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+static inline void __set_bit(int nr, void *addr)
+{
+	int	mask;
+	unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a |= mask;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+static inline void clear_bit(int nr, volatile unsigned long *a)
+{
+	int	mask;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *a)
+{
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a ^= mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a ^= mask;
+}
+
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+
+	return retval;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+
+	return retval;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+
+	return retval;
+}
+
+static __inline__ int test_bit(int nr, const volatile void *addr)
+{
+	return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result, __d2, __d3;
+
+        __asm__("gettr  tr0, %2\n\t"
+                "pta    $+32, tr0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beq    %3, r63, tr0\n\t"
+                "pta    $+4, tr0\n"
+                "0:\n\t"
+                "shlri.l        %1, 1, %1\n\t"
+                "addi   %0, 1, %0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beqi   %3, 1, tr0\n"
+                "1:\n\t"
+                "ptabs  %2, tr0\n\t"
+                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
+                : "0" (0L), "1" (word));
+
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	int r = 0;
+
+	if (!word)
+		return 0;
+	if (!(word & 0xffff)) {
+		word >>= 16;
+		r += 16;
+	}
+	if (!(word & 0xff)) {
+		word >>= 8;
+		r += 8;
+	}
+	if (!(word & 0xf)) {
+		word >>= 4;
+		r += 4;
+	}
+	if (!(word & 3)) {
+		word >>= 2;
+		r += 2;
+	}
+	if (!(word & 1)) {
+		word >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+
+static inline int find_next_zero_bit(void *addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x)	generic_hweight32(x)
+#define hweight16(x)	generic_hweight16(x)
+#define hweight8(x)	generic_hweight8(x)
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#ifdef __LITTLE_ENDIAN__
+#define ext2_set_bit(nr, addr) test_and_set_bit((nr), (addr))
+#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr), (addr))
+#define ext2_test_bit(nr, addr) test_bit((nr), (addr))
+#define ext2_find_first_zero_bit(addr, size) find_first_zero_bit((addr), (size))
+#define ext2_find_next_zero_bit(addr, size, offset) \
+                find_next_zero_bit((addr), (size), (offset))
+#else
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	local_irq_save(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	int			mask;
+	const volatile unsigned char	*ADDR = (const unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+#endif
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#define ffs(x)	generic_ffs(x)
+#define fls(x)	generic_fls(x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_BITOPS_H */
diff --git a/include/asm-sh64/bug.h b/include/asm-sh64/bug.h
new file mode 100644
index 000000000000..3acd54d59566
--- /dev/null
+++ b/include/asm-sh64/bug.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_SH64_BUG_H
+#define __ASM_SH64_BUG_H
+
+#include <linux/config.h>
+
+/*
+ * Tell the user there is some problem, then force a segfault (in process
+ * context) or a panic (interrupt context).
+ */
+#define BUG() do { \
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	*(volatile int *)0 = 0; \
+} while (0)
+
+#define BUG_ON(condition) do { \
+	if (unlikely((condition)!=0)) \
+		BUG(); \
+} while(0)
+
+#define PAGE_BUG(page) do { \
+	BUG(); \
+} while (0)
+
+#define WARN_ON(condition) do { \
+	if (unlikely((condition)!=0)) { \
+		printk("Badness in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \
+		dump_stack(); \
+	} \
+} while (0)
+
+#endif /* __ASM_SH64_BUG_H */
+
diff --git a/include/asm-sh64/bugs.h b/include/asm-sh64/bugs.h
new file mode 100644
index 000000000000..05554aaea672
--- /dev/null
+++ b/include/asm-sh64/bugs.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_SH64_BUGS_H
+#define __ASM_SH64_BUGS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/bugs.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any Super-H bugs yet.
+ */
+
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+	extern char *get_cpu_subtype(void);
+	extern unsigned long loops_per_jiffy;
+
+	cpu_data->loops_per_jiffy = loops_per_jiffy;
+
+	printk("CPU: %s\n", get_cpu_subtype());
+}
+#endif /* __ASM_SH64_BUGS_H */
diff --git a/include/asm-sh64/byteorder.h b/include/asm-sh64/byteorder.h
new file mode 100644
index 000000000000..f602ebe334eb
--- /dev/null
+++ b/include/asm-sh64/byteorder.h
@@ -0,0 +1,49 @@
+#ifndef __ASM_SH64_BYTEORDER_H
+#define __ASM_SH64_BYTEORDER_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/byteorder.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <asm/types.h>
+
+static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__("byterev	%0, %0\n\t"
+		"shari		%0, 32, %0"
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__("byterev	%0, %0\n\t"
+		"shari		%0, 48, %0"
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* __ASM_SH64_BYTEORDER_H */
diff --git a/include/asm-sh64/cache.h b/include/asm-sh64/cache.h
new file mode 100644
index 000000000000..f54e85e8a470
--- /dev/null
+++ b/include/asm-sh64/cache.h
@@ -0,0 +1,141 @@
+#ifndef __ASM_SH64_CACHE_H
+#define __ASM_SH64_CACHE_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/cache.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ */
+#include <asm/cacheflush.h>
+
+#define L1_CACHE_SHIFT		5
+/* bytes per L1 cache line */
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+#define L1_CACHE_ALIGN_MASK	(~(L1_CACHE_BYTES - 1))
+#define L1_CACHE_ALIGN(x)	(((x)+(L1_CACHE_BYTES - 1)) & L1_CACHE_ALIGN_MASK)
+#define L1_CACHE_SIZE_BYTES	(L1_CACHE_BYTES << 10)
+/* Largest L1 which this arch supports */
+#define L1_CACHE_SHIFT_MAX	5
+
+#ifdef MODULE
+#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
+#else
+#define __cacheline_aligned					\
+  __attribute__((__aligned__(L1_CACHE_BYTES),			\
+		 __section__(".data.cacheline_aligned")))
+#endif
+
+/*
+ * Control Registers.
+ */
+#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
+#define ICCR_REG0	0		/* Register 0 offset */
+#define ICCR_REG1	1		/* Register 1 offset */
+#define ICCR0		ICCR_BASE+ICCR_REG0
+#define ICCR1		ICCR_BASE+ICCR_REG1
+
+#define ICCR0_OFF	0x0		/* Set ICACHE off */
+#define ICCR0_ON	0x1		/* Set ICACHE on */
+#define ICCR0_ICI	0x2		/* Invalidate all in IC */
+
+#define ICCR1_NOLOCK	0x0		/* Set No Locking */
+
+#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
+#define OCCR_REG0	0		/* Register 0 offset */
+#define OCCR_REG1	1		/* Register 1 offset */
+#define OCCR0		OCCR_BASE+OCCR_REG0
+#define OCCR1		OCCR_BASE+OCCR_REG1
+
+#define OCCR0_OFF	0x0		/* Set OCACHE off */
+#define OCCR0_ON	0x1		/* Set OCACHE on */
+#define OCCR0_OCI	0x2		/* Invalidate all in OC */
+#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
+#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
+
+#define OCCR1_NOLOCK	0x0		/* Set No Locking */
+
+
+/*
+ * SH-5
+ * A bit of description here, for neff=32.
+ *
+ *                               |<--- tag  (19 bits) --->|
+ * +-----------------------------+-----------------+------+----------+------+
+ * |                             |                 | ways |set index |offset|
+ * +-----------------------------+-----------------+------+----------+------+
+ *                                ^                 2 bits   8 bits   5 bits
+ *                                +- Bit 31
+ *
+ * Cacheline size is based on offset: 5 bits = 32 bytes per line
+ * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
+ * have a broader space for registers. These are outlined by
+ * CACHE_?C_*_STEP below.
+ *
+ */
+
+/* Valid and Dirty bits */
+#define SH_CACHE_VALID		(1LL<<0)
+#define SH_CACHE_UPDATED	(1LL<<57)
+
+/* Cache flags */
+#define SH_CACHE_MODE_WT	(1LL<<0)
+#define SH_CACHE_MODE_WB	(1LL<<1)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Cache information structure.
+ *
+ * Defined for both I and D cache, per-processor.
+ */
+struct cache_info {
+	unsigned int ways;
+	unsigned int sets;
+	unsigned int linesz;
+
+	unsigned int way_shift;
+	unsigned int entry_shift;
+	unsigned int set_shift;
+	unsigned int way_step_shift;
+	unsigned int asid_shift;
+
+	unsigned int way_ofs;
+
+	unsigned int asid_mask;
+	unsigned int idx_mask;
+	unsigned int epn_mask;
+
+	unsigned long flags;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Instruction cache */
+#define CACHE_IC_ADDRESS_ARRAY 0x01000000
+
+/* Operand Cache */
+#define CACHE_OC_ADDRESS_ARRAY 0x01800000
+
+/* These declarations relate to cache 'synonyms' in the operand cache.  A
+   'synonym' occurs where effective address bits overlap between those used for
+   indexing the cache sets and those passed to the MMU for translation.  In the
+   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
+
+#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
+#define CACHE_OC_SYN_SHIFT  12
+/* Mask to select synonym bit(s) */
+#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
+
+
+/*
+ * Instruction cache can't be invalidated based on physical addresses.
+ * No Instruction Cache defines required, then.
+ */
+
+#endif /* __ASM_SH64_CACHE_H */
diff --git a/include/asm-sh64/cacheflush.h b/include/asm-sh64/cacheflush.h
new file mode 100644
index 000000000000..55f71aa0aa6b
--- /dev/null
+++ b/include/asm-sh64/cacheflush.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_SH64_CACHEFLUSH_H
+#define __ASM_SH64_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+struct vm_area_struct;
+struct page;
+struct mm_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_sigtramp(unsigned long start, unsigned long end);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+			      unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+extern void flush_dcache_page(struct page *pg);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define flush_icache_page(vma, page)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_icache_user_range(vma, page, vaddr, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH64_CACHEFLUSH_H */
+
diff --git a/include/asm-sh64/cayman.h b/include/asm-sh64/cayman.h
new file mode 100644
index 000000000000..7b6b96844842
--- /dev/null
+++ b/include/asm-sh64/cayman.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/cayman.h
+ *
+ * Cayman definitions
+ *
+ * Global defintions for the SH5 Cayman board
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ */
+
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
diff --git a/include/asm-sh64/checksum.h b/include/asm-sh64/checksum.h
new file mode 100644
index 000000000000..aa3911a99490
--- /dev/null
+++ b/include/asm-sh64/checksum.h
@@ -0,0 +1,95 @@
+#ifndef __ASM_SH64_CHECKSUM_H
+#define __ASM_SH64_CHECKSUM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/checksum.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <asm/registers.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage unsigned int csum_partial(const unsigned char *buff, int len,
+				     unsigned int sum);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	verify_area().
+ */
+
+
+unsigned int csum_partial_copy_nocheck(const char *src, char *dst, int len,
+				       unsigned int sum);
+
+unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+					 int len, int sum, int *err_ptr);
+
+/*
+ * These are the old (and unsafe) way of doing checksums, a warning message will be
+ * printed if they are used and an exeption occurs.
+ *
+ * these functions should go away after some time.
+ */
+
+#define csum_partial_copy_fromuser csum_partial_copy
+
+unsigned int csum_partial_copy(const char *src, char *dst, int len,
+			       unsigned int sum);
+
+static inline unsigned short csum_fold(unsigned int sum)
+{
+        sum = (sum & 0xffff) + (sum >> 16);
+        sum = (sum & 0xffff) + (sum >> 16);
+        return ~(sum);
+}
+
+unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl);
+
+unsigned long csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+				 unsigned short len, unsigned short proto,
+				 unsigned int sum);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* __ASM_SH64_CHECKSUM_H */
+
diff --git a/include/asm-sh64/cpumask.h b/include/asm-sh64/cpumask.h
new file mode 100644
index 000000000000..b7b105dbedaf
--- /dev/null
+++ b/include/asm-sh64/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_CPUMASK_H
+#define __ASM_SH64_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* __ASM_SH64_CPUMASK_H */
diff --git a/include/asm-sh64/cputime.h b/include/asm-sh64/cputime.h
new file mode 100644
index 000000000000..0fd89da2aa86
--- /dev/null
+++ b/include/asm-sh64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SH64_CPUTIME_H
+#define __SH64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SH64_CPUTIME_H */
diff --git a/include/asm-sh64/current.h b/include/asm-sh64/current.h
new file mode 100644
index 000000000000..261224339d6f
--- /dev/null
+++ b/include/asm-sh64/current.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SH64_CURRENT_H
+#define __ASM_SH64_CURRENT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/current.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_SH64_CURRENT_H */
+
diff --git a/include/asm-sh64/delay.h b/include/asm-sh64/delay.h
new file mode 100644
index 000000000000..6ae31301a16a
--- /dev/null
+++ b/include/asm-sh64/delay.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH64_DELAY_H
+#define __ASM_SH64_DELAY_H
+
+extern void __delay(int loops);
+extern void __udelay(unsigned long long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long long nsecs, unsigned long lpj);
+extern void udelay(unsigned long usecs);
+extern void ndelay(unsigned long nsecs);
+
+#endif /* __ASM_SH64_DELAY_H */
+
diff --git a/include/asm-sh64/div64.h b/include/asm-sh64/div64.h
new file mode 100644
index 000000000000..f75869565e2e
--- /dev/null
+++ b/include/asm-sh64/div64.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_DIV64_H
+#define __ASM_SH64_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* __ASM_SH64_DIV64_H */
diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h
new file mode 100644
index 000000000000..b8d26fe677f4
--- /dev/null
+++ b/include/asm-sh64/dma-mapping.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+struct pci_dev;
+extern void *consistent_alloc(struct pci_dev *hwdev, size_t size,
+				    dma_addr_t *dma_handle);
+extern void consistent_free(struct pci_dev *hwdev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle);
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, int flag)
+{
+	return consistent_alloc(NULL, size, dma_handle);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle)
+{
+	consistent_free(NULL, size, vaddr, dma_handle);
+}
+
+static inline void dma_cache_sync(void *vaddr, size_t size,
+				  enum dma_data_direction dir)
+{
+	dma_cache_wback_inv((unsigned long)vaddr, size);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+					void *ptr, size_t size,
+					enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return virt_to_bus(ptr);
+#endif
+	dma_cache_sync(ptr, size, dir);
+
+	return virt_to_bus(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+			       sg[i].length, dir);
+#endif
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+
+	return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size, enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(bus_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+					 dma_addr_t dma_handle,
+					 unsigned long offset, size_t size,
+					 enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+			       sg[i].length, dir);
+#endif
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_single")));
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_single")));
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_sg")));
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+	__attribute__ ((alias("dma_sync_sg")));
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
+
diff --git a/include/asm-sh64/dma.h b/include/asm-sh64/dma.h
new file mode 100644
index 000000000000..e701f39470a2
--- /dev/null
+++ b/include/asm-sh64/dma.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_SH64_DMA_H
+#define __ASM_SH64_DMA_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/dma.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+
+#define MAX_DMA_CHANNELS	4
+
+/*
+ * SH5 can DMA in any memory area.
+ *
+ * The static definition is dodgy because it should limit
+ * the highest DMA-able address based on the actual
+ * Physical memory available. This is actually performed
+ * at run time in defining the memory allowed to DMA_ZONE.
+ */
+#define MAX_DMA_ADDRESS		~(NPHYS_MASK)
+
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* __ASM_SH64_DMA_H */
diff --git a/include/asm-sh64/elf.h b/include/asm-sh64/elf.h
new file mode 100644
index 000000000000..f994286e1998
--- /dev/null
+++ b/include/asm-sh64/elf.h
@@ -0,0 +1,107 @@
+#ifndef __ASM_SH64_ELF_H
+#define __ASM_SH64_ELF_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/elf.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/byteorder.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( (x)->e_machine == EM_SH )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_IMM_LOW16		246
+#define	R_SH_IMM_LOW16_PCREL	247
+#define	R_SH_IMM_MEDLOW16	248
+#define	R_SH_IMM_MEDLOW16_PCREL	249
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __ASM_SH64_ELF_H */
diff --git a/include/asm-sh64/errno.h b/include/asm-sh64/errno.h
new file mode 100644
index 000000000000..57b46d4bdd41
--- /dev/null
+++ b/include/asm-sh64/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_ERRNO_H
+#define __ASM_SH64_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_SH64_ERRNO_H */
diff --git a/include/asm-sh64/fcntl.h b/include/asm-sh64/fcntl.h
new file mode 100644
index 000000000000..ffcc36c64fa5
--- /dev/null
+++ b/include/asm-sh64/fcntl.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH64_FCNTL_H
+#define __ASM_SH64_FCNTL_H
+
+#include <asm-sh/fcntl.h>
+
+#endif /* __ASM_SH64_FCNTL_H */
+
diff --git a/include/asm-sh64/hardirq.h b/include/asm-sh64/hardirq.h
new file mode 100644
index 000000000000..ad2330e41fd5
--- /dev/null
+++ b/include/asm-sh64/hardirq.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SH64_HARDIRQ_H
+#define __ASM_SH64_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+/* arch/sh64/kernel/irq.c */
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* __ASM_SH64_HARDIRQ_H */
+
diff --git a/include/asm-sh64/hardware.h b/include/asm-sh64/hardware.h
new file mode 100644
index 000000000000..931c1ad80847
--- /dev/null
+++ b/include/asm-sh64/hardware.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_SH64_HARDWARE_H
+#define __ASM_SH64_HARDWARE_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/hardware.h
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * Defitions of the locations of registers in the physical address space.
+ */
+
+#define	PHYS_PERIPHERAL_BLOCK	0x09000000
+#define PHYS_DMAC_BLOCK		0x0e000000
+#define PHYS_PCI_BLOCK		0x60000000
+#define PHYS_EMI_BLOCK		0xff000000
+
+#endif /* __ASM_SH64_HARDWARE_H */
diff --git a/include/asm-sh64/hdreg.h b/include/asm-sh64/hdreg.h
new file mode 100644
index 000000000000..52d983635a27
--- /dev/null
+++ b/include/asm-sh64/hdreg.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_HDREG_H
+#define __ASM_SH64_HDREG_H
+
+#include <asm-generic/hdreg.h>
+
+#endif /* __ASM_SH64_HDREG_H */
diff --git a/include/asm-sh64/hw_irq.h b/include/asm-sh64/hw_irq.h
new file mode 100644
index 000000000000..ae718d1f2d6c
--- /dev/null
+++ b/include/asm-sh64/hw_irq.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH64_HW_IRQ_H
+#define __ASM_SH64_HW_IRQ_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/hw_irq.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+static __inline__ void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) { /* Nothing to do */ }
+
+#endif /* __ASM_SH64_HW_IRQ_H */
diff --git a/include/asm-sh64/ide.h b/include/asm-sh64/ide.h
new file mode 100644
index 000000000000..6fd514daa1ba
--- /dev/null
+++ b/include/asm-sh64/ide.h
@@ -0,0 +1,35 @@
+/*
+ *  linux/include/asm-sh64/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ *
+ *  sh64 version by Richard Curnow & Paul Mundt
+ */
+
+/*
+ *  This file contains the sh64 architecture specific IDE code.
+ */
+
+#ifndef __ASM_SH64_IDE_H
+#define __ASM_SH64_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
+#endif
+
+/* Without this, the initialisation of PCI IDE cards end up calling
+ * ide_init_hwif_ports, which won't work. */
+#ifdef CONFIG_BLK_DEV_IDEPCI
+#define IDE_ARCH_OBSOLETE_INIT 1
+#define ide_default_io_ctl(base)	(0)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_IDE_H */
diff --git a/include/asm-sh64/io.h b/include/asm-sh64/io.h
new file mode 100644
index 000000000000..cfafaa73b2b0
--- /dev/null
+++ b/include/asm-sh64/io.h
@@ -0,0 +1,250 @@
+#ifndef __ASM_SH64_IO_H
+#define __ASM_SH64_IO_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/io.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+
+/*
+ * Convention:
+ *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ * These may (will) be platform specific function.
+ *
+ * In addition, we have
+ *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
+ * which are processor specific. Address should be the result of
+ * onchip_remap();
+ */
+
+#include <linux/compiler.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm-generic/iomap.h>
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#define page_to_bus page_to_phys
+
+/*
+ * Nothing overly special here.. instead of doing the same thing
+ * over and over again, we just define a set of sh64_in/out functions
+ * with an implicit size. The traditional read{b,w,l}/write{b,w,l}
+ * mess is wrapped to this, as are the SH-specific ctrl_in/out routines.
+ */
+static inline unsigned char sh64_in8(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short sh64_in16(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int sh64_in32(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *)addr;
+}
+
+static inline unsigned long long sh64_in64(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long long __force *)addr;
+}
+
+static inline void sh64_out8(unsigned char b, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *)addr = b;
+	wmb();
+}
+
+static inline void sh64_out16(unsigned short b, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *)addr = b;
+	wmb();
+}
+
+static inline void sh64_out32(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *)addr = b;
+	wmb();
+}
+
+static inline void sh64_out64(unsigned long long b, volatile void __iomem *addr)
+{
+	*(volatile unsigned long long __force *)addr = b;
+	wmb();
+}
+
+#define readb(addr)		sh64_in8(addr)
+#define readw(addr)		sh64_in16(addr)
+#define readl(addr)		sh64_in32(addr)
+#define readb_relaxed(addr)	sh64_in8(addr)
+#define readw_relaxed(addr)	sh64_in16(addr)
+#define readl_relaxed(addr)	sh64_in32(addr)
+
+#define writeb(b, addr)		sh64_out8(b, addr)
+#define writew(b, addr)		sh64_out16(b, addr)
+#define writel(b, addr)		sh64_out32(b, addr)
+
+#define ctrl_inb(addr)		sh64_in8(ioport_map(addr, 1))
+#define ctrl_inw(addr)		sh64_in16(ioport_map(addr, 2))
+#define ctrl_inl(addr)		sh64_in32(ioport_map(addr, 4))
+
+#define ctrl_outb(b, addr)	sh64_out8(b, ioport_map(addr, 1))
+#define ctrl_outw(b, addr)	sh64_out16(b, ioport_map(addr, 2))
+#define ctrl_outl(b, addr)	sh64_out32(b, ioport_map(addr, 4))
+
+#define ioread8(addr)		sh64_in8(addr)
+#define ioread16(addr)		sh64_in16(addr)
+#define ioread32(addr)		sh64_in32(addr)
+#define iowrite8(b, addr)	sh64_out8(b, addr)
+#define iowrite16(b, addr)	sh64_out16(b, addr)
+#define iowrite32(b, addr)	sh64_out32(b, addr)
+
+#define inb(addr)		ctrl_inb(addr)
+#define inw(addr)		ctrl_inw(addr)
+#define inl(addr)		ctrl_inl(addr)
+#define outb(b, addr)		ctrl_outb(b, addr)
+#define outw(b, addr)		ctrl_outw(b, addr)
+#define outl(b, addr)		ctrl_outl(b, addr)
+
+void outsw(unsigned long port, const void *addr, unsigned long count);
+void insw(unsigned long port, void *addr, unsigned long count);
+void outsl(unsigned long port, const void *addr, unsigned long count);
+void insl(unsigned long port, void *addr, unsigned long count);
+
+void memcpy_toio(void __iomem *to, const void *from, long count);
+void memcpy_fromio(void *to, void __iomem *from, long count);
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SH_CAYMAN
+extern unsigned long smsc_superio_virt;
+#endif
+#ifdef CONFIG_PCI
+extern unsigned long pciio_virt;
+#endif
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are trivial on the 1:1 Linux/SuperH mapping
+ */
+extern __inline__ unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+extern __inline__ void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+extern void * __ioremap(unsigned long phys_addr, unsigned long size,
+			unsigned long flags);
+
+extern __inline__ void * ioremap(unsigned long phys_addr, unsigned long size)
+{
+	return __ioremap(phys_addr, size, 1);
+}
+
+extern __inline__ void * ioremap_nocache (unsigned long phys_addr, unsigned long size)
+{
+	return __ioremap(phys_addr, size, 0);
+}
+
+extern void iounmap(void *addr);
+
+unsigned long onchip_remap(unsigned long addr, unsigned long size, const char* name);
+extern void onchip_unmap(unsigned long vaddr);
+
+static __inline__ int check_signature(volatile void __iomem *io_addr,
+			const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and RAM coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ *  - dma_cache_wback(start, size) writes back any dirty lines but does
+ *    not invalidate the cache.  This can be used before DMA reads from
+ *    memory,
+ */
+
+static __inline__ void dma_cache_wback_inv (unsigned long start, unsigned long size)
+{
+	unsigned long s = start & L1_CACHE_ALIGN_MASK;
+	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
+
+	for (; s <= e; s += L1_CACHE_BYTES)
+		asm volatile ("ocbp	%0, 0" : : "r" (s));
+}
+
+static __inline__ void dma_cache_inv (unsigned long start, unsigned long size)
+{
+	// Note that caller has to be careful with overzealous
+	// invalidation should there be partial cache lines at the extremities
+	// of the specified range
+	unsigned long s = start & L1_CACHE_ALIGN_MASK;
+	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
+
+	for (; s <= e; s += L1_CACHE_BYTES)
+		asm volatile ("ocbi	%0, 0" : : "r" (s));
+}
+
+static __inline__ void dma_cache_wback (unsigned long start, unsigned long size)
+{
+	unsigned long s = start & L1_CACHE_ALIGN_MASK;
+	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
+
+	for (; s <= e; s += L1_CACHE_BYTES)
+		asm volatile ("ocbwb	%0, 0" : : "r" (s));
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH64_IO_H */
diff --git a/include/asm-sh64/ioctl.h b/include/asm-sh64/ioctl.h
new file mode 100644
index 000000000000..c089a6fb78e0
--- /dev/null
+++ b/include/asm-sh64/ioctl.h
@@ -0,0 +1,83 @@
+#ifndef __ASM_SH64_IOCTL_H
+#define __ASM_SH64_IOCTL_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/ioctl.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ *
+ */
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* __ASM_SH64_IOCTL_H */
diff --git a/include/asm-sh64/ioctls.h b/include/asm-sh64/ioctls.h
new file mode 100644
index 000000000000..08f3c1f2e419
--- /dev/null
+++ b/include/asm-sh64/ioctls.h
@@ -0,0 +1,116 @@
+#ifndef __ASM_SH64_IOCTLS_H
+#define __ASM_SH64_IOCTLS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/ioctls.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004  Richard Curnow
+ *
+ */
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		0x6601		/* _IO('f', 1) */
+#define FIONCLEX	0x6602		/* _IO('f', 2) */
+#define FIOASYNC	0x4004667d	/* _IOW('f', 125, int) */
+#define FIONBIO		0x4004667e	/* _IOW('f', 126, int) */
+#define FIONREAD	0x8004667f	/* _IOW('f', 127, int) */
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	0x80086680	/* _IOR('f', 128, loff_t) */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		0x80127417	/* _IOR('t', 23, struct termio) */
+#define TCSETA		0x40127418	/* _IOW('t', 24, struct termio) */
+#define TCSETAW		0x40127419	/* _IOW('t', 25, struct termio) */
+#define TCSETAF		0x4012741c	/* _IOW('t', 28, struct termio) */
+
+#define TCSBRK		0x741d		/* _IO('t', 29) */
+#define TCXONC		0x741e		/* _IO('t', 30) */
+#define TCFLSH		0x741f		/* _IO('t', 31) */
+
+#define TIOCSWINSZ	0x40087467	/* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ	0x80087468	/* _IOR('t', 104, struct winsize) */
+#define	TIOCSTART	0x746e		/* _IO('t', 110)  start output, like ^Q */
+#define	TIOCSTOP	0x746f		/* _IO('t', 111)  stop output, like ^S */
+#define TIOCOUTQ        0x80047473	/* _IOR('t', 115, int) output queue size */
+
+#define TIOCSPGRP	0x40047476	/* _IOW('t', 118, int) */
+#define TIOCGPGRP	0x80047477	/* _IOR('t', 119, int) */
+
+#define TIOCEXCL	0x540c		/* _IO('T', 12) */
+#define TIOCNXCL	0x540d		/* _IO('T', 13) */
+#define TIOCSCTTY	0x540e		/* _IO('T', 14) */
+
+#define TIOCSTI		0x40015412	/* _IOW('T', 18, char) 0x5412 */
+#define TIOCMGET	0x80045415	/* _IOR('T', 21, unsigned int) 0x5415 */
+#define TIOCMBIS	0x40045416	/* _IOW('T', 22, unsigned int) 0x5416 */
+#define TIOCMBIC	0x40045417	/* _IOW('T', 23, unsigned int) 0x5417 */
+#define TIOCMSET	0x40045418	/* _IOW('T', 24, unsigned int) 0x5418 */
+
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	0x80045419	/* _IOR('T', 25, unsigned int) 0x5419 */
+#define TIOCSSOFTCAR	0x4004541a	/* _IOW('T', 26, unsigned int) 0x541A */
+#define TIOCLINUX	0x4004541c	/* _IOW('T', 28, char) 0x541C */
+#define TIOCCONS	0x541d		/* _IO('T', 29) */
+#define TIOCGSERIAL	0x803c541e	/* _IOR('T', 30, struct serial_struct) 0x541E */
+#define TIOCSSERIAL	0x403c541f	/* _IOW('T', 31, struct serial_struct) 0x541F */
+#define TIOCPKT		0x40045420	/* _IOW('T', 32, int) 0x5420 */
+
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422		/* _IO('T', 34) */
+#define TIOCSETD	0x40045423	/* _IOW('T', 35, int) 0x5423 */
+#define TIOCGETD	0x80045424	/* _IOR('T', 36, int) 0x5424 */
+#define TCSBRKP		0x40045424	/* _IOW('T', 37, int) 0x5425 */	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x8c105426	/* _IOR('T', 38, struct tty_struct) 0x5426 */ /* For debugging only */
+#define TIOCSBRK	0x5427		/* _IO('T', 39) */ /* BSD compatibility */
+#define TIOCCBRK	0x5428		/* _IO('T', 40) */ /* BSD compatibility */
+#define TIOCGSID	0x80045429	/* _IOR('T', 41, pid_t) 0x5429 */ /* Return the session ID of FD */
+#define TIOCGPTN	0x80045430	/* _IOR('T',0x30, unsigned int) 0x5430 Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	0x40045431	/* _IOW('T',0x31, int) Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453		/* _IO('T', 83) */
+#define TIOCSERGWILD	0x80045454	/* _IOR('T', 84,  int) 0x5454 */
+#define TIOCSERSWILD	0x40045455	/* _IOW('T', 85,  int) 0x5455 */
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x80d85458	/* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
+#define TIOCSERGETLSR   0x80045459	/* _IOR('T', 89, unsigned int) 0x5459 */ /* Get line status register */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#define TIOCSERGETMULTI 0x80a8545a	/* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config  */
+#define TIOCSERSETMULTI 0x40a8545b	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
+
+#define TIOCMIWAIT	0x545c		/* _IO('T', 92) wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x802c545d	/* _IOR('T', 93, struct async_icount) 0x545D */	/* read serial port inline interrupt counts */
+
+#endif /* __ASM_SH64_IOCTLS_H */
diff --git a/include/asm-sh64/ipc.h b/include/asm-sh64/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-sh64/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-sh64/ipcbuf.h b/include/asm-sh64/ipcbuf.h
new file mode 100644
index 000000000000..c441e35299c0
--- /dev/null
+++ b/include/asm-sh64/ipcbuf.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH64_IPCBUF_H__
+#define __ASM_SH64_IPCBUF_H__
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/ipcbuf.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * The ipc64_perm structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_SH64_IPCBUF_H__ */
diff --git a/include/asm-sh64/irq.h b/include/asm-sh64/irq.h
new file mode 100644
index 000000000000..f815b43df845
--- /dev/null
+++ b/include/asm-sh64/irq.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SH64_IRQ_H
+#define __ASM_SH64_IRQ_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/irq.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <linux/config.h>
+
+/*
+ * Encoded IRQs are not considered worth to be supported.
+ * Main reason is that there's no per-encoded-interrupt
+ * enable/disable mechanism (as there was in SH3/4).
+ * An all enabled/all disabled is worth only if there's
+ * a cascaded IC to disable/enable/ack on. Until such
+ * IC is available there's no such support.
+ *
+ * Presumably Encoded IRQs may use extra IRQs beyond 64,
+ * below. Some logic must be added to cope with IRQ_IRL?
+ * in an exclusive way.
+ *
+ * Priorities are set at Platform level, when IRQ_IRL0-3
+ * are set to 0 Encoding is allowed. Otherwise it's not
+ * allowed.
+ */
+
+/* Independent IRQs */
+#define IRQ_IRL0	0
+#define IRQ_IRL1	1
+#define IRQ_IRL2	2
+#define IRQ_IRL3	3
+
+#define IRQ_INTA	4
+#define IRQ_INTB	5
+#define IRQ_INTC	6
+#define IRQ_INTD	7
+
+#define IRQ_SERR	12
+#define IRQ_ERR		13
+#define IRQ_PWR3	14
+#define IRQ_PWR2	15
+#define IRQ_PWR1	16
+#define IRQ_PWR0	17
+
+#define IRQ_DMTE0	18
+#define IRQ_DMTE1	19
+#define IRQ_DMTE2	20
+#define IRQ_DMTE3	21
+#define IRQ_DAERR	22
+
+#define IRQ_TUNI0	32
+#define IRQ_TUNI1	33
+#define IRQ_TUNI2	34
+#define IRQ_TICPI2	35
+
+#define IRQ_ATI		36
+#define IRQ_PRI		37
+#define IRQ_CUI		38
+
+#define IRQ_ERI		39
+#define IRQ_RXI		40
+#define IRQ_BRI		41
+#define IRQ_TXI		42
+
+#define IRQ_ITI		63
+
+#define NR_INTC_IRQS	64
+
+#ifdef CONFIG_SH_CAYMAN
+#define NR_EXT_IRQS     32
+#define START_EXT_IRQS  64
+
+/* PCI bus 2 uses encoded external interrupts on the Cayman board */
+#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
+#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
+#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
+#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
+
+#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
+#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
+
+#define IRQ_CFCARD	(START_EXT_IRQS + 7)
+#define IRQ_PCMCIA	(0)
+
+#else
+#define NR_EXT_IRQS	0
+#endif
+
+#define NR_IRQS		(NR_INTC_IRQS+NR_EXT_IRQS)
+
+
+/* Default IRQs, fixed */
+#define TIMER_IRQ	IRQ_TUNI0
+#define RTC_IRQ		IRQ_CUI
+
+/* Default Priorities, Platform may choose differently */
+#define	NO_PRIORITY	0	/* Disabled */
+#define TIMER_PRIORITY	2
+#define RTC_PRIORITY	TIMER_PRIORITY
+#define SCIF_PRIORITY	3
+#define INTD_PRIORITY	3
+#define	IRL3_PRIORITY	4
+#define INTC_PRIORITY	6
+#define	IRL2_PRIORITY	7
+#define INTB_PRIORITY	9
+#define	IRL1_PRIORITY	10
+#define INTA_PRIORITY	12
+#define	IRL0_PRIORITY	13
+#define TOP_PRIORITY	15
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+extern int intc_evt_to_irq[(0xE20/0x20)+1];
+int intc_irq_describe(char* p, int irq);
+
+#define irq_canonicalize(irq)	(irq)
+
+#ifdef CONFIG_SH_CAYMAN
+int cayman_irq_demux(int evt);
+int cayman_irq_describe(char* p, int irq);
+#define irq_demux(x) cayman_irq_demux(x)
+#define irq_describe(p, x) cayman_irq_describe(p, x)
+#else
+#define irq_demux(x) (intc_evt_to_irq[x])
+#define irq_describe(p, x) intc_irq_describe(p, x)
+#endif
+
+/*
+ * Function for "on chip support modules".
+ */
+
+/*
+ * SH-5 supports Priority based interrupts only.
+ * Interrupt priorities are defined at platform level.
+ */
+#define set_ipr_data(a, b, c, d)
+#define make_ipr_irq(a)
+#define make_imask_irq(a)
+
+#endif /* __ASM_SH64_IRQ_H */
diff --git a/include/asm-sh64/keyboard.h b/include/asm-sh64/keyboard.h
new file mode 100644
index 000000000000..733e2bbe7b8c
--- /dev/null
+++ b/include/asm-sh64/keyboard.h
@@ -0,0 +1,74 @@
+/*
+ *  linux/include/asm-shmedia/keyboard.h
+ *
+ * Copied from i386 version:
+ *    Created 3 Nov 1996 by Geert Uytterhoeven
+ */
+
+/*
+ *  This file contains the i386 architecture specific keyboard definitions
+ */
+
+#ifndef __ASM_SH64_KEYBOARD_H
+#define __ASM_SH64_KEYBOARD_H
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_SH_CAYMAN
+#define KEYBOARD_IRQ			(START_EXT_IRQS + 2) /* SMSC SuperIO IRQ 1 */
+#endif
+#define DISABLE_KBD_DURING_INTERRUPTS	0
+
+extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int pckbd_getkeycode(unsigned int scancode);
+extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
+			   char raw_mode);
+extern char pckbd_unexpected_up(unsigned char keycode);
+extern void pckbd_leds(unsigned char leds);
+extern void pckbd_init_hw(void);
+extern unsigned char pckbd_sysrq_xlate[128];
+
+#define kbd_setkeycode		pckbd_setkeycode
+#define kbd_getkeycode		pckbd_getkeycode
+#define kbd_translate		pckbd_translate
+#define kbd_unexpected_up	pckbd_unexpected_up
+#define kbd_leds		pckbd_leds
+#define kbd_init_hw		pckbd_init_hw
+#define kbd_sysrq_xlate		pckbd_sysrq_xlate
+
+#define SYSRQ_KEY 0x54
+
+/* resource allocation */
+#define kbd_request_region()
+#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
+                                             "keyboard", NULL)
+
+/* How to access the keyboard macros on this platform.  */
+#define kbd_read_input() inb(KBD_DATA_REG)
+#define kbd_read_status() inb(KBD_STATUS_REG)
+#define kbd_write_output(val) outb(val, KBD_DATA_REG)
+#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
+
+/* Some stoneage hardware needs delays after some operations.  */
+#define kbd_pause() do { } while(0)
+
+/*
+ * Machine specific bits for the PS/2 driver
+ */
+
+#ifdef CONFIG_SH_CAYMAN
+#define AUX_IRQ (START_EXT_IRQS + 6) /* SMSC SuperIO IRQ12 */
+#endif
+
+#define aux_request_irq(hand, dev_id)					\
+	request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+
+#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH64_KEYBOARD_H */
+
diff --git a/include/asm-sh64/kmap_types.h b/include/asm-sh64/kmap_types.h
new file mode 100644
index 000000000000..2ae7c7587919
--- /dev/null
+++ b/include/asm-sh64/kmap_types.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH64_KMAP_TYPES_H
+#define __ASM_SH64_KMAP_TYPES_H
+
+#include <asm-sh/kmap_types.h>
+
+#endif /* __ASM_SH64_KMAP_TYPES_H */
+
diff --git a/include/asm-sh64/linkage.h b/include/asm-sh64/linkage.h
new file mode 100644
index 000000000000..1dd0e84a228d
--- /dev/null
+++ b/include/asm-sh64/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH64_LINKAGE_H
+#define __ASM_SH64_LINKAGE_H
+
+#include <asm-sh/linkage.h>
+
+#endif /* __ASM_SH64_LINKAGE_H */
+
diff --git a/include/asm-sh64/local.h b/include/asm-sh64/local.h
new file mode 100644
index 000000000000..d9bd95dd36e2
--- /dev/null
+++ b/include/asm-sh64/local.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH64_LOCAL_H
+#define __ASM_SH64_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_SH64_LOCAL_H */
+
diff --git a/include/asm-sh64/mc146818rtc.h b/include/asm-sh64/mc146818rtc.h
new file mode 100644
index 000000000000..6cd3aec68dbe
--- /dev/null
+++ b/include/asm-sh64/mc146818rtc.h
@@ -0,0 +1,7 @@
+/*
+ * linux/include/asm-sh64/mc146818rtc.h
+ *
+*/
+
+/* For now, an empty place-holder to get IDE to compile. */
+
diff --git a/include/asm-sh64/mman.h b/include/asm-sh64/mman.h
new file mode 100644
index 000000000000..a9be6d885c3e
--- /dev/null
+++ b/include/asm-sh64/mman.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_MMAN_H
+#define __ASM_SH64_MMAN_H
+
+#include <asm-sh/mman.h>
+
+#endif /* __ASM_SH64_MMAN_H */
diff --git a/include/asm-sh64/mmu.h b/include/asm-sh64/mmu.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/include/asm-sh64/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-sh64/mmu_context.h b/include/asm-sh64/mmu_context.h
new file mode 100644
index 000000000000..f062e1513272
--- /dev/null
+++ b/include/asm-sh64/mmu_context.h
@@ -0,0 +1,209 @@
+#ifndef __ASM_SH64_MMU_CONTEXT_H
+#define __ASM_SH64_MMU_CONTEXT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/mmu_context.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Cache of MMU context last used.
+ *
+ * The MMU "context" consists of two things:
+ *   (a) TLB cache version (or cycle, top 24 bits of mmu_context_cache)
+ *   (b) ASID (Address Space IDentifier, bottom 8 bits of mmu_context_cache)
+ */
+extern unsigned long mmu_context_cache;
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+
+/* Current mm's pgd */
+extern pgd_t *mmu_pdtp_cache;
+
+#define SR_ASID_MASK		0xffffffffff00ffffULL
+#define SR_ASID_SHIFT		16
+
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100
+#define NO_CONTEXT			0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID			0x100
+
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+extern __inline__ void
+get_new_mmu_context(struct mm_struct *mm)
+{
+	extern void flush_tlb_all(void);
+	extern void flush_cache_all(void);
+
+	unsigned long mc = ++mmu_context_cache;
+
+	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+		/* We exhaust ASID of this version.
+		   Flush all TLB and start new cycle. */
+		flush_tlb_all();
+		/* We have to flush all caches as ASIDs are
+                   used in cache */
+		flush_cache_all();
+		/* Fix version if needed.
+		   Note that we avoid version #0/asid #0 to distingush NO_CONTEXT. */
+		if (!mc)
+			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm->context = mc;
+}
+
+/*
+ * Get MMU context if needed.
+ */
+static __inline__ void
+get_mmu_context(struct mm_struct *mm)
+{
+	if (mm) {
+		unsigned long mc = mmu_context_cache;
+		/* Check if we have old version of context.
+		   If it's old, we need to get new context with new version. */
+		if ((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK)
+			get_new_mmu_context(mm);
+	}
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+					struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	extern void flush_tlb_mm(struct mm_struct *mm);
+
+	/* Well, at least free TLB entries */
+	flush_tlb_mm(mm);
+}
+
+#endif	/* __ASSEMBLY__ */
+
+/* Common defines */
+#define TLB_STEP	0x00000010
+#define TLB_PTEH	0x00000000
+#define TLB_PTEL	0x00000008
+
+/* PTEH defines */
+#define PTEH_ASID_SHIFT	2
+#define PTEH_VALID	0x0000000000000001
+#define PTEH_SHARED	0x0000000000000002
+#define PTEH_MATCH_ASID	0x00000000000003ff
+
+#ifndef __ASSEMBLY__
+/* This has to be a common function because the next location to fill
+ * information is shared. */
+extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
+
+/* Profiling counter. */
+#ifdef CONFIG_SH64_PROC_TLB
+extern unsigned long long calls_to_do_fast_page_fault;
+#endif
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long long sr;
+
+	asm volatile ("getcon   " __SR ", %0\n\t"
+		      : "=r" (sr));
+
+	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
+	return (unsigned long) sr;
+}
+
+/* Set ASID into SR */
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long long sr, pc;
+
+	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
+
+	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
+
+	/*
+	 * It is possible that this function may be inlined and so to avoid
+	 * the assembler reporting duplicate symbols we make use of the gas trick
+	 * of generating symbols using numerics and forward reference.
+	 */
+	asm volatile ("movi	1, %1\n\t"
+		      "shlli	%1, 28, %1\n\t"
+		      "or	%0, %1, %1\n\t"
+		      "putcon	%1, " __SR "\n\t"
+		      "putcon	%0, " __SSR "\n\t"
+		      "movi	1f, %1\n\t"
+		      "ori	%1, 1 , %1\n\t"
+		      "putcon	%1, " __SPC "\n\t"
+		      "rte\n"
+		      "1:\n\t"
+		      : "=r" (sr), "=r" (pc) : "0" (sr));
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static __inline__ void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
+}
+
+
+static __inline__ void switch_mm(struct mm_struct *prev,
+				 struct mm_struct *next,
+				 struct task_struct *tsk)
+{
+	if (prev != next) {
+		mmu_pdtp_cache = next->pgd;
+		activate_context(next);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev, next) \
+	switch_mm((prev),(next),NULL)
+
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_SH64_MMU_CONTEXT_H */
diff --git a/include/asm-sh64/module.h b/include/asm-sh64/module.h
new file mode 100644
index 000000000000..c313650d3d93
--- /dev/null
+++ b/include/asm-sh64/module.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SH64_MODULE_H
+#define __ASM_SH64_MODULE_H
+/*
+ * This file contains the SH architecture specific module code.
+ */
+
+struct mod_arch_specific {
+	/* empty */
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#define module_map(x)		vmalloc(x)
+#define module_unmap(x)		vfree(x)
+#define module_arch_init(x)	(0)
+#define arch_init_modules(x)	do { } while (0)
+
+#endif /* __ASM_SH64_MODULE_H */
diff --git a/include/asm-sh64/msgbuf.h b/include/asm-sh64/msgbuf.h
new file mode 100644
index 000000000000..cf0494ce0ba8
--- /dev/null
+++ b/include/asm-sh64/msgbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH64_MSGBUF_H
+#define __ASM_SH64_MSGBUF_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/msgbuf.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_SH64_MSGBUF_H */
diff --git a/include/asm-sh64/namei.h b/include/asm-sh64/namei.h
new file mode 100644
index 000000000000..99d759a805ce
--- /dev/null
+++ b/include/asm-sh64/namei.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_SH64_NAMEI_H
+#define __ASM_SH64_NAMEI_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/namei.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * Included from linux/fs/namei.c
+ *
+ */
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __ASM_SH64_NAMEI_H */
diff --git a/include/asm-sh64/page.h b/include/asm-sh64/page.h
new file mode 100644
index 000000000000..e1f7f5a41210
--- /dev/null
+++ b/include/asm-sh64/page.h
@@ -0,0 +1,137 @@
+#ifndef __ASM_SH64_PAGE_H
+#define __ASM_SH64_PAGE_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/page.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * benedict.gaster@superh.com 19th, 24th July 2002.
+ *
+ * Modified to take account of enabling for D-CACHE support.
+ *
+ */
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	4096
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT	29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern struct page *mem_map;
+extern void sh64_page_clear(void *page);
+extern void sh64_page_copy(void *from, void *to);
+
+#define clear_page(page)               sh64_page_clear(page)
+#define copy_page(to,from)             sh64_page_copy(from, to)
+
+#if defined(CONFIG_DCACHE_DISABLED)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#else
+
+extern void clear_user_page(void *to, unsigned long address, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
+
+#endif /* defined(CONFIG_DCACHE_DISABLED) */
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/*
+ * Kconfig defined.
+ */
+#define __MEMORY_START		(CONFIG_MEMORY_START)
+#define PAGE_OFFSET		(CONFIG_CACHED_MEMORY_OFFSET)
+
+#define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+#define MAP_NR(addr)		((__pa(addr)-__MEMORY_START) >> PAGE_SHIFT)
+#define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
+
+#define phys_to_page(phys)	(mem_map + (((phys) - __MEMORY_START) >> PAGE_SHIFT))
+#define page_to_phys(page)	(((page - mem_map) << PAGE_SHIFT) + __MEMORY_START)
+
+/* PFN start number, because of __MEMORY_START */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+
+#define pfn_to_page(pfn)	(mem_map + (pfn) - PFN_START)
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_valid(pfn)		(((pfn) - PFN_START) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_PAGE_H */
diff --git a/include/asm-sh64/param.h b/include/asm-sh64/param.h
new file mode 100644
index 000000000000..d18cc87c1a80
--- /dev/null
+++ b/include/asm-sh64/param.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/param.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+#ifndef __ASM_SH64_PARAM_H
+#define __ASM_SH64_PARAM_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+# ifdef CONFIG_SH_WDT
+#  define HZ		1000		/* Needed for high-res WOVF */
+# else
+#  define HZ		100
+# endif
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NGROUPS
+#define NGROUPS		32
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_SH64_PARAM_H */
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
new file mode 100644
index 000000000000..8cc14e139750
--- /dev/null
+++ b/include/asm-sh64/pci.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_SH64_PCI_H
+#define __ASM_SH64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()     1
+
+/*
+ * These are currently the correct values for the STM overdrive board
+ * We need some way of setting this on a board specific way, it will
+ * not be the same on other boards I think
+ */
+#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+#define PCIBIOS_MIN_IO          0x2000
+#define PCIBIOS_MIN_MEM         0x40000000
+#endif
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+/*
+ * Set penalize isa irq function
+ */
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+/* pci_unmap_{single,page} being a nop depends upon the
+ * configuration.
+ */
+#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+#else
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+#endif
+
+/* Not supporting more than 32-bit PCI bus addresses now, but
+ * must satisfy references to this function.  Change if needed.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+/* Board-specific fixup routines. */
+extern void pcibios_fixup(void);
+extern void pcibios_fixup_irqs(void);
+
+#ifdef CONFIG_PCI_AUTO
+extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#endif
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* generic DMA-mapping stuff */
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_SH64_PCI_H */
+
diff --git a/include/asm-sh64/percpu.h b/include/asm-sh64/percpu.h
new file mode 100644
index 000000000000..a01d16cd0e8c
--- /dev/null
+++ b/include/asm-sh64/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_PERCPU
+#define __ASM_SH64_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_SH64_PERCPU */
diff --git a/include/asm-sh64/pgalloc.h b/include/asm-sh64/pgalloc.h
new file mode 100644
index 000000000000..b25f5df5535c
--- /dev/null
+++ b/include/asm-sh64/pgalloc.h
@@ -0,0 +1,195 @@
+#ifndef __ASM_SH64_PGALLOC_H
+#define __ASM_SH64_PGALLOC_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/pgalloc.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ */
+
+#include <linux/threads.h>
+#include <linux/mm.h>
+
+#define pgd_quicklist (current_cpu_data.pgd_quick)
+#define pmd_quicklist (current_cpu_data.pmd_quick)
+#define pte_quicklist (current_cpu_data.pte_quick)
+#define pgtable_cache_size (current_cpu_data.pgtable_cache_sz)
+
+static inline void pgd_init(unsigned long page)
+{
+	unsigned long *pgd = (unsigned long *)page;
+	extern pte_t empty_bad_pte_table[PTRS_PER_PTE];
+	int i;
+
+	for (i = 0; i < USER_PTRS_PER_PGD; i++)
+		pgd[i] = (unsigned long)empty_bad_pte_table;
+}
+
+/*
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+extern __inline__ pgd_t *get_pgd_slow(void)
+{
+	unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t));
+	pgd_t *ret = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL);
+	return ret;
+}
+
+extern __inline__ pgd_t *get_pgd_fast(void)
+{
+	unsigned long *ret;
+
+	if ((ret = pgd_quicklist) != NULL) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	} else
+		ret = (unsigned long *)get_pgd_slow();
+
+	if (ret) {
+		memset(ret, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+	}
+	return (pgd_t *)ret;
+}
+
+extern __inline__ void free_pgd_fast(pgd_t *pgd)
+{
+	*(unsigned long *)pgd = (unsigned long) pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	pgtable_cache_size++;
+}
+
+extern __inline__ void free_pgd_slow(pgd_t *pgd)
+{
+	kfree((void *)pgd);
+}
+
+extern pte_t *get_pte_slow(pmd_t *pmd, unsigned long address_preadjusted);
+extern pte_t *get_pte_kernel_slow(pmd_t *pmd, unsigned long address_preadjusted);
+
+extern __inline__ pte_t *get_pte_fast(void)
+{
+	unsigned long *ret;
+
+	if((ret = (unsigned long *)pte_quicklist) != NULL) {
+		pte_quicklist = (unsigned long *)(*ret);
+		ret[0] = ret[1];
+		pgtable_cache_size--;
+	}
+	return (pte_t *)ret;
+}
+
+extern __inline__ void free_pte_fast(pte_t *pte)
+{
+	*(unsigned long *)pte = (unsigned long) pte_quicklist;
+	pte_quicklist = (unsigned long *) pte;
+	pgtable_cache_size++;
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					   unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT|__GFP_ZERO);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+
+	return pte;
+}
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#if defined(CONFIG_SH64_PGTABLE_2_LEVEL)
+
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+#define __pte_free_tlb(tlb,pte)		tlb_remove_page((tlb),(pte))
+#define __pmd_free_tlb(tlb,pmd)		do { } while (0)
+
+#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL)
+
+static __inline__ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd;
+	pmd = (pmd_t *) __get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return pmd;
+}
+
+static __inline__ void pmd_free(pmd_t *pmd)
+{
+	free_page((unsigned long) pmd);
+}
+
+#define pgd_populate(mm, pgd, pmd) pgd_set(pgd, pmd)
+#define __pmd_free_tlb(tlb,pmd)		pmd_free(pmd)
+
+#else
+#error "No defined page table size"
+#endif
+
+#define check_pgt_cache()		do { } while (0)
+#define pgd_free(pgd)		free_pgd_slow(pgd)
+#define pgd_alloc(mm)		get_pgd_fast()
+
+extern int do_check_pgt_cache(int, int);
+
+extern inline void set_pgdir(unsigned long address, pgd_t entry)
+{
+	struct task_struct * p;
+	pgd_t *pgd;
+
+	read_lock(&tasklist_lock);
+	for_each_process(p) {
+		if (!p->mm)
+			continue;
+		*pgd_offset(p->mm,address) = entry;
+	}
+	read_unlock(&tasklist_lock);
+	for (pgd = (pgd_t *)pgd_quicklist; pgd; pgd = (pgd_t *)*(unsigned long *)pgd)
+		pgd[address >> PGDIR_SHIFT] = entry;
+}
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+	set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) (pte)))
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) page_address (pte)));
+}
+
+#endif /* __ASM_SH64_PGALLOC_H */
diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h
new file mode 100644
index 000000000000..45f70c0f4a5e
--- /dev/null
+++ b/include/asm-sh64/pgtable.h
@@ -0,0 +1,508 @@
+#ifndef __ASM_SH64_PGTABLE_H
+#define __ASM_SH64_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/pgtable.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the SuperH page table tree.
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/config.h>
+
+extern void paging_init(void);
+
+/* We provide our own get_unmapped_area to avoid cache synonym issue */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386.
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr) (mem_map + MAP_NR(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * NEFF and NPHYS related defines.
+ * FIXME : These need to be model-dependent.  For now this is OK, SH5-101 and SH5-103
+ * implement 32 bits effective and 32 bits physical.  But future implementations may
+ * extend beyond this.
+ */
+#define NEFF		32
+#define	NEFF_SIGN	(1LL << (NEFF - 1))
+#define	NEFF_MASK	(-1LL << NEFF)
+
+#define NPHYS		32
+#define	NPHYS_SIGN	(1LL << (NPHYS - 1))
+#define	NPHYS_MASK	(-1LL << NPHYS)
+
+/* Typically 2-level is sufficient up to 32 bits of virtual address space, beyond
+   that 3-level would be appropriate. */
+#if defined(CONFIG_SH64_PGTABLE_2_LEVEL)
+/* For 4k pages, this contains 512 entries, i.e. 9 bits worth of address. */
+#define PTRS_PER_PTE	((1<<PAGE_SHIFT)/sizeof(unsigned long long))
+#define PTE_MAGNITUDE	3	      /* sizeof(unsigned long long) magnit. */
+#define PTE_SHIFT	PAGE_SHIFT
+#define PTE_BITS	(PAGE_SHIFT - PTE_MAGNITUDE)
+
+/* top level: PMD. */
+#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
+#define PGD_BITS	(NEFF - PGDIR_SHIFT)
+#define PTRS_PER_PGD	(1<<PGD_BITS)
+
+/* middle level: PMD. This doesn't do anything for the 2-level case. */
+#define PTRS_PER_PMD	(1)
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PMD_SHIFT	PGDIR_SHIFT
+#define PMD_SIZE	PGDIR_SIZE
+#define PMD_MASK	PGDIR_MASK
+
+#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL)
+/*
+ * three-level asymmetric paging structure: PGD is top level.
+ * The asymmetry comes from 32-bit pointers and 64-bit PTEs.
+ */
+/* bottom level: PTE. It's 9 bits = 512 pointers */
+#define PTRS_PER_PTE	((1<<PAGE_SHIFT)/sizeof(unsigned long long))
+#define PTE_MAGNITUDE	3	      /* sizeof(unsigned long long) magnit. */
+#define PTE_SHIFT	PAGE_SHIFT
+#define PTE_BITS	(PAGE_SHIFT - PTE_MAGNITUDE)
+
+/* middle level: PMD. It's 10 bits = 1024 pointers */
+#define PTRS_PER_PMD	((1<<PAGE_SHIFT)/sizeof(unsigned long long *))
+#define PMD_MAGNITUDE	2	      /* sizeof(unsigned long long *) magnit. */
+#define PMD_SHIFT	(PTE_SHIFT + PTE_BITS)
+#define PMD_BITS	(PAGE_SHIFT - PMD_MAGNITUDE)
+
+/* top level: PMD. It's 1 bit = 2 pointers */
+#define PGDIR_SHIFT	(PMD_SHIFT + PMD_BITS)
+#define PGD_BITS	(NEFF - PGDIR_SHIFT)
+#define PTRS_PER_PGD	(1<<PGD_BITS)
+
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#else
+#error "No defined number of page table levels"
+#endif
+
+/*
+ * Error outputs.
+ */
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Table setting routines. Used within arch/mm only.
+ */
+#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	unsigned long long x = ((unsigned long long) pteval.pte);
+	unsigned long long *xp = (unsigned long long *) pteptr;
+	/*
+	 * Sign-extend based on NPHYS.
+	 */
+	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
+{
+	pmd_val(*pmdp) = (unsigned long) ptep;
+}
+
+/*
+ * PGD defines. Top level.
+ */
+
+/* To find an entry in a generic PGD. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define __pgd_offset(address) pgd_index(address)
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* To find an entry in a kernel PGD. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * PGD level access routines.
+ *
+ * Note1:
+ * There's no need to use physical addresses since the tree walk is all
+ * in performed in software, until the PTE translation.
+ *
+ * Note 2:
+ * A PGD entry can be uninitialized (_PGD_UNUSED), generically bad,
+ * clear (_PGD_EMPTY), present. When present, lower 3 nibbles contain
+ * _KERNPG_TABLE. Being a kernel virtual pointer also bit 31 must
+ * be 1. Assuming an arbitrary clear value of bit 31 set to 0 and
+ * lower 3 nibbles set to 0xFFF (_PGD_EMPTY) any other value is a
+ * bad pgd that must be notified via printk().
+ *
+ */
+#define _PGD_EMPTY		0x0
+
+#if defined(CONFIG_SH64_PGTABLE_2_LEVEL)
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+#define pgd_present(pgd) ((pgd_val(pgd) & _PAGE_PRESENT) ? 1 : 0)
+#define pgd_clear(xx)				do { } while(0)
+
+#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL)
+#define pgd_present(pgd_entry)	(1)
+#define pgd_none(pgd_entry)	(pgd_val((pgd_entry)) == _PGD_EMPTY)
+/* TODO: Think later about what a useful definition of 'bad' would be now. */
+#define pgd_bad(pgd_entry)	(0)
+#define pgd_clear(pgd_entry_p)	(set_pgd((pgd_entry_p), __pgd(_PGD_EMPTY)))
+
+#endif
+
+
+#define pgd_page(pgd_entry)	((unsigned long) (pgd_val(pgd_entry) & PAGE_MASK))
+
+/*
+ * PMD defines. Middle level.
+ */
+
+/* PGD to PMD dereferencing */
+#if defined(CONFIG_SH64_PGTABLE_2_LEVEL)
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL)
+#define __pmd_offset(address) \
+		(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pmd_offset(dir, addr) \
+		((pmd_t *) ((pgd_val(*(dir))) & PAGE_MASK) + __pmd_offset((addr)))
+#endif
+
+/*
+ * PMD level access routines. Same notes as above.
+ */
+#define _PMD_EMPTY		0x0
+/* Either the PMD is empty or present, it's not paged out */
+#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
+#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
+#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
+#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_page_kernel(pmd_entry) \
+	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
+
+#define pmd_page(pmd) \
+	(virt_to_page(pmd_val(pmd)))
+
+/* PMD to PTE dereferencing */
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, addr) \
+		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+/* Round it up ! */
+#define USER_PTRS_PER_PGD	((TASK_SIZE+PGDIR_SIZE-1)/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#ifndef __ASSEMBLY__
+#define VMALLOC_END	0xff000000
+#define VMALLOC_START	0xf0000000
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define IOBASE_VADDR	0xff000000
+#define IOBASE_END	0xffffffff
+
+/*
+ * PTEL coherent flags.
+ * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
+ */
+/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
+   positions, to avoid expensive bit shuffling on every refill.  The remaining
+   bits are used for s/w purposes and masked out on each refill.
+
+   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
+   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
+   swapped out, and it must be placed so that it doesn't overlap either the
+   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
+   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
+   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
+   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
+   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
+#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
+#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
+#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
+#define _PAGE_PRESENT	0x004  /* software: page referenced */
+#define _PAGE_FILE	0x004  /* software: only when !present */
+#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
+#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
+#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
+#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
+#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
+#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
+#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
+#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
+#define _PAGE_ACCESSED	0x800  /* software: page referenced */
+
+/* Mask which drops software flags */
+#define _PAGE_FLAGS_HARDWARE_MASK	0xfffffffffffff3dbLL
+
+/*
+ * HugeTLB support
+ */
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE1)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
+#endif
+
+/*
+ * Default flags for a Kernel page.
+ * This is fundametally also SHARED because the main use of this define
+ * (other than for PGD/PMD entries) is for the VMALLOC pool which is
+ * contextless.
+ *
+ * _PAGE_EXECUTE is required for modules
+ *
+ */
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			 _PAGE_EXECUTE | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SHARED)
+
+/* Default flags for a User page */
+#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
+
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_USER | \
+				 _PAGE_SHARED)
+/* We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
+ * protection mode for the stack. */
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_USER | _PAGE_EXECUTE)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_USER)
+#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
+
+
+/*
+ * In ST50 we have full permissions (Read/Write/Execute/Shared).
+ * Just match'em all. These are for mmap(), therefore all at least
+ * User/Cachable/Present/Accessed. No point in making Fault on Write.
+ */
+#define __MMAP_COMMON	(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED)
+       /* sxwr */
+#define __P000	__pgprot(__MMAP_COMMON)
+#define __P001	__pgprot(__MMAP_COMMON | _PAGE_READ)
+#define __P010	__pgprot(__MMAP_COMMON)
+#define __P011	__pgprot(__MMAP_COMMON | _PAGE_READ)
+#define __P100	__pgprot(__MMAP_COMMON | _PAGE_EXECUTE)
+#define __P101	__pgprot(__MMAP_COMMON | _PAGE_EXECUTE | _PAGE_READ)
+#define __P110	__pgprot(__MMAP_COMMON | _PAGE_EXECUTE)
+#define __P111	__pgprot(__MMAP_COMMON | _PAGE_EXECUTE | _PAGE_READ)
+
+#define __S000	__pgprot(__MMAP_COMMON | _PAGE_SHARED)
+#define __S001	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_READ)
+#define __S010	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_WRITE)
+#define __S011	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_READ | _PAGE_WRITE)
+#define __S100	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE)
+#define __S101	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_READ)
+#define __S110	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_WRITE)
+#define __S111	__pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_READ | _PAGE_WRITE)
+
+/* Make it a device mapping for maximum safety (e.g. for mapping device
+   registers into user-space via /dev/map).  */
+#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+/*
+ * Handling allocation failures during page table setup.
+ */
+extern void __handle_bad_pmd_kernel(pmd_t * pmd);
+#define __handle_bad_pmd(x)	__handle_bad_pmd_kernel(x)
+
+/*
+ * PTE level access routines.
+ *
+ * Note1:
+ * It's the tree walk leaf. This is physical address to be stored.
+ *
+ * Note 2:
+ * Regarding the choice of _PTE_EMPTY:
+
+   We must choose a bit pattern that cannot be valid, whether or not the page
+   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
+   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
+   left for us to select.  If we force bit[7]==0 when swapped out, we could use
+   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
+   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
+   empty.  This is convenient, because the page tables get cleared to zero
+   when they are allocated.
+
+ */
+#define _PTE_EMPTY	0x0
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
+#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page
+ * addresses:
+ */
+
+/*
+ * Given a PTE, return the index of the mem_map[] entry corresponding
+ * to the page frame the PTE. Get the absolute physical address, make
+ * a relative physical address and translate it to an index.
+ */
+#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
+				 __MEMORY_START) >> PAGE_SHIFT)
+
+/*
+ * Given a PTE, return the "struct page *".
+ */
+#define pte_page(x)		(mem_map + pte_pagenr(x))
+
+/*
+ * Return number of (down rounded) MB corresponding to x pages.
+ */
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_READ; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXECUTE; }
+static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_WRITE; }
+
+extern inline pte_t pte_rdprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_READ)); return pte; }
+extern inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
+extern inline pte_t pte_exprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_EXECUTE)); return pte; }
+extern inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+extern inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+
+extern inline pte_t pte_mkread(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_READ)); return pte; }
+extern inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
+extern inline pte_t pte_mkexec(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_EXECUTE)); return pte; }
+extern inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+extern inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page,pgprot)							\
+({										\
+	pte_t __pte;								\
+										\
+	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
+		__MEMORY_START | pgprot_val((pgprot))));			\
+	__pte;									\
+})
+
+/*
+ * This takes a (absolute) physical page address that is used
+ * by the remapping functions
+ */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
+
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
+
+#define page_pte_prot(page, prot) mk_pte(page, prot)
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+typedef pte_t *pte_addr_t;
+#define pgtable_cache_init()	do { } while (0)
+
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+
+/* Encode and decode a swap entry */
+#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS		29
+#define pte_to_pgoff(pte)		(pte_val(pte))
+#define pgoff_to_pte(off)		((pte_t) { (off) | _PAGE_FILE })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define PageSkip(page)		(0)
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()    do { } while (0)
+
+#define pte_pfn(x)		(((unsigned long)((x).pte)) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASM_SH64_PGTABLE_H */
diff --git a/include/asm-sh64/platform.h b/include/asm-sh64/platform.h
new file mode 100644
index 000000000000..7046a9014027
--- /dev/null
+++ b/include/asm-sh64/platform.h
@@ -0,0 +1,69 @@
+#ifndef __ASM_SH64_PLATFORM_H
+#define __ASM_SH64_PLATFORM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/platform.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * benedict.gaster@superh.com:	 3rd May 2002
+ *    Added support for ramdisk, removing statically linked romfs at the same time.
+ */
+
+#include <linux/ioport.h>
+#include <asm/irq.h>
+
+
+/*
+ * Platform definition structure.
+ */
+struct sh64_platform {
+	unsigned int readonly_rootfs;
+	unsigned int ramdisk_flags;
+	unsigned int initial_root_dev;
+	unsigned int loader_type;
+	unsigned int initrd_start;
+	unsigned int initrd_size;
+	unsigned int fpu_flags;
+	unsigned int io_res_count;
+	unsigned int kram_res_count;
+	unsigned int xram_res_count;
+	unsigned int rom_res_count;
+	struct resource *io_res_p;
+	struct resource *kram_res_p;
+	struct resource *xram_res_p;
+	struct resource *rom_res_p;
+};
+
+extern struct sh64_platform platform_parms;
+
+extern unsigned long long memory_start, memory_end;
+
+extern unsigned long long fpu_in_use;
+
+extern int platform_int_priority[NR_INTC_IRQS];
+
+#define FPU_FLAGS		(platform_parms.fpu_flags)
+#define STANDARD_IO_RESOURCES	(platform_parms.io_res_count)
+#define STANDARD_KRAM_RESOURCES	(platform_parms.kram_res_count)
+#define STANDARD_XRAM_RESOURCES	(platform_parms.xram_res_count)
+#define STANDARD_ROM_RESOURCES	(platform_parms.rom_res_count)
+
+/*
+ * Kernel Memory description, Respectively:
+ * code = last but one memory descriptor
+ * data = last memory descriptor
+ */
+#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2])
+#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1])
+
+/* Be prepared to 64-bit sign extensions */
+#define PFN_UP(x)       ((((x) + PAGE_SIZE-1) >> PAGE_SHIFT) & 0x000fffff)
+#define PFN_DOWN(x)     (((x) >> PAGE_SHIFT) & 0x000fffff)
+#define PFN_PHYS(x)     ((x) << PAGE_SHIFT)
+
+#endif	/* __ASM_SH64_PLATFORM_H */
diff --git a/include/asm-sh64/poll.h b/include/asm-sh64/poll.h
new file mode 100644
index 000000000000..a420d14eb704
--- /dev/null
+++ b/include/asm-sh64/poll.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH64_POLL_H
+#define __ASM_SH64_POLL_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/poll.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __ASM_SH64_POLL_H */
diff --git a/include/asm-sh64/posix_types.h b/include/asm-sh64/posix_types.h
new file mode 100644
index 000000000000..0620317a6f0f
--- /dev/null
+++ b/include/asm-sh64/posix_types.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH64_POSIX_TYPES_H
+#define __ASM_SH64_POSIX_TYPES_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/posix_types.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef long unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/include/asm-sh64/processor.h b/include/asm-sh64/processor.h
new file mode 100644
index 000000000000..a51bd41e6fbc
--- /dev/null
+++ b/include/asm-sh64/processor.h
@@ -0,0 +1,286 @@
+#ifndef __ASM_SH64_PROCESSOR_H
+#define __ASM_SH64_PROCESSOR_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/processor.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ */
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/registers.h>
+#include <linux/threads.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr	tr0, %1\n\t" \
+	"pta	4, tr0\n\t" \
+	"gettr	tr0, %0\n\t" \
+	"ptabs	%1, tr0\n\t"	\
+	:"=r" (pc), "=r" (__dummy) \
+	: "1" (__dummy)); \
+pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+enum cpu_type {
+	CPU_SH5_101,
+	CPU_SH5_103,
+	CPU_SH_NONE
+};
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	enum cpu_type type;
+	unsigned long loops_per_jiffy;
+
+	char	hard_math;
+
+	unsigned long *pgd_quick;
+	unsigned long *pmd_quick;
+	unsigned long *pte_quick;
+	unsigned long pgtable_cache_sz;
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+
+	/* Cache info */
+	struct cache_info icache;
+	struct cache_info dcache;
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+};
+
+extern struct sh_cpuinfo boot_cpu_data;
+
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE	0x7ffff000UL
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#define SR_FD    0x00008000
+
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	/* long status; * software status information */
+};
+
+#if 0
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long long fp_regs[32];
+	unsigned int fpscr;
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+#endif
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	/* 'hard' itself only produces 32 bit alignment, yet we need
+	   to access it using 64 bit load/store as well. */
+	unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+	/* This stores the address of the pt_regs built during a context
+	   switch, or of the register save area built for a kernel mode
+	   exception.  It is used for backtracing the stack of a sleeping task
+	   or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+	/* This stores the address of the pt_regs constructed on entry from
+	   user mode.  It is a fixed value over the lifetime of a process, or
+	   NULL for a kernel thread. */
+	struct pt_regs *uregs;
+
+	unsigned long trap_no, error_code;
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+extern  struct pt_regs fake_swapper_regs;
+
+#define INIT_THREAD  {				\
+	.sp		= sizeof(init_stack) +	\
+			  (long) &init_stack,	\
+	.pc		= 0,			\
+        .kregs		= &fake_swapper_regs,	\
+	.uregs	        = NULL,			\
+	.trap_no	= 0,			\
+	.error_code	= 0,			\
+	.address	= 0,			\
+	.fpu		= { { { 0, } }, }	\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(regs, new_pc, new_sp) 	 		\
+	set_fs(USER_DS);			 		\
+	regs->sr = SR_USER;	/* User mode. */ 		\
+	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	regs->pc |= 1;		/* Set SHmedia ! */		\
+	regs->regs[18] = 0;   		 	 		\
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while (0)
+#define release_segments(mm)	do { } while (0)
+#define forget_segments()	do { } while (0)
+#define prepare_to_copy(tsk)	do { } while (0)
+/*
+ * FPU lazy state save handling.
+ */
+
+extern __inline__ void release_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+extern __inline__ void grab_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+/* Save the current FP regs */
+void fpsave(struct sh_fpu_hard_struct *fpregs);
+
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_relax()	do { } while (0)
+
+#endif	/* __ASSEMBLY__ */
+#endif /* __ASM_SH64_PROCESSOR_H */
+
diff --git a/include/asm-sh64/ptrace.h b/include/asm-sh64/ptrace.h
new file mode 100644
index 000000000000..56190f521587
--- /dev/null
+++ b/include/asm-sh64/ptrace.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SH64_PTRACE_H
+#define __ASM_SH64_PTRACE_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/ptrace.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	unsigned long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+
+#ifdef __KERNEL__
+#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+#endif /* __ASM_SH64_PTRACE_H */
diff --git a/include/asm-sh64/registers.h b/include/asm-sh64/registers.h
new file mode 100644
index 000000000000..7eec666acf84
--- /dev/null
+++ b/include/asm-sh64/registers.h
@@ -0,0 +1,106 @@
+#ifndef __ASM_SH64_REGISTERS_H
+#define __ASM_SH64_REGISTERS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/registers.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004  Richard Curnow
+ */
+
+#ifdef __ASSEMBLY__
+/* =====================================================================
+**
+** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
+**	      Assigns symbolic names to control & target registers.
+*/
+
+/*
+ * Define some useful aliases for control registers.
+ */
+#define SR	cr0
+#define SSR	cr1
+#define PSSR	cr2
+			/* cr3 UNDEFINED */
+#define INTEVT	cr4
+#define EXPEVT	cr5
+#define PEXPEVT	cr6
+#define TRA	cr7
+#define SPC	cr8
+#define PSPC	cr9
+#define RESVEC	cr10
+#define VBR	cr11
+			/* cr12 UNDEFINED */
+#define TEA	cr13
+			/* cr14-cr15 UNDEFINED */
+#define DCR	cr16
+#define KCR0	cr17
+#define KCR1	cr18
+			/* cr19-cr31 UNDEFINED */
+			/* cr32-cr61 RESERVED */
+#define CTC	cr62
+#define USR	cr63
+
+/*
+ * ABI dependent registers (general purpose set)
+ */
+#define RET	r2
+#define ARG1	r2
+#define ARG2	r3
+#define ARG3	r4
+#define ARG4	r5
+#define ARG5	r6
+#define ARG6	r7
+#define SP	r15
+#define LINK	r18
+#define ZERO	r63
+
+/*
+ * Status register defines: used only by assembly sources (and
+ * 			    syntax independednt)
+ */
+#define SR_RESET_VAL	0x0000000050008000
+#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
+#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
+
+#if defined (CONFIG_SH64_SR_WATCH)
+#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
+#else
+#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
+#endif
+
+#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
+#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
+
+#else	/* Not __ASSEMBLY__ syntax */
+
+/*
+** Stringify reg. name
+*/
+#define __str(x)  #x
+
+/* Stringify control register names for use in inline assembly */
+#define __SR __str(SR)
+#define __SSR __str(SSR)
+#define __PSSR __str(PSSR)
+#define __INTEVT __str(INTEVT)
+#define __EXPEVT __str(EXPEVT)
+#define __PEXPEVT __str(PEXPEVT)
+#define __TRA __str(TRA)
+#define __SPC __str(SPC)
+#define __PSPC __str(PSPC)
+#define __RESVEC __str(RESVEC)
+#define __VBR __str(VBR)
+#define __TEA __str(TEA)
+#define __DCR __str(DCR)
+#define __KCR0 __str(KCR0)
+#define __KCR1 __str(KCR1)
+#define __CTC __str(CTC)
+#define __USR __str(USR)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH64_REGISTERS_H */
diff --git a/include/asm-sh64/resource.h b/include/asm-sh64/resource.h
new file mode 100644
index 000000000000..8ff93944ae66
--- /dev/null
+++ b/include/asm-sh64/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_RESOURCE_H
+#define __ASM_SH64_RESOURCE_H
+
+#include <asm-sh/resource.h>
+
+#endif /* __ASM_SH64_RESOURCE_H */
diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h
new file mode 100644
index 000000000000..5d8fa32d2e9d
--- /dev/null
+++ b/include/asm-sh64/scatterlist.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/scatterlist.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ */
+#ifndef __ASM_SH64_SCATTERLIST_H
+#define __ASM_SH64_SCATTERLIST_H
+
+struct scatterlist {
+    struct page * page; /* Location for highmem page, if any */
+    unsigned int offset;/* for highmem, page offset */
+    dma_addr_t dma_address;
+    unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* !__ASM_SH64_SCATTERLIST_H */
diff --git a/include/asm-sh64/sections.h b/include/asm-sh64/sections.h
new file mode 100644
index 000000000000..897f36bcdf85
--- /dev/null
+++ b/include/asm-sh64/sections.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH64_SECTIONS_H
+#define __ASM_SH64_SECTIONS_H
+
+#include <asm-sh/sections.h>
+
+#endif /* __ASM_SH64_SECTIONS_H */
+
diff --git a/include/asm-sh64/segment.h b/include/asm-sh64/segment.h
new file mode 100644
index 000000000000..92ac001fc483
--- /dev/null
+++ b/include/asm-sh64/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_SEGMENT_H */
diff --git a/include/asm-sh64/semaphore-helper.h b/include/asm-sh64/semaphore-helper.h
new file mode 100644
index 000000000000..fcfafe263e86
--- /dev/null
+++ b/include/asm-sh64/semaphore-helper.h
@@ -0,0 +1,101 @@
+#ifndef __ASM_SH64_SEMAPHORE_HELPER_H
+#define __ASM_SH64_SEMAPHORE_HELPER_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/semaphore-helper.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+#include <asm/errno.h>
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ * (C) Copyright 1999 Andrea Arcangeli
+ */
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ *
+ * This is trivially done with load_locked/store_cond,
+ * which we have.  Let the rest of the losers suck eggs.
+ */
+static __inline__ void wake_one_more(struct semaphore * sem)
+{
+	atomic_inc((atomic_t *)&sem->sleepers);
+}
+
+static __inline__ int waking_non_zero(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ *	1	got the lock
+ *	0	go to sleep
+ *	-EINTR	interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
+						struct task_struct *tsk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers > 0) {
+		sem->sleepers--;
+		ret = 1;
+	} else if (signal_pending(tsk)) {
+		atomic_inc(&sem->count);
+		ret = -EINTR;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ *	1	failed to lock
+ *	0	got the lock
+ *
+ * We must undo the sem->count down_trylock() increment while we are
+ * protected by the spinlock in order to make atomic this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
+{
+	unsigned long flags;
+	int ret = 1;
+
+	spin_lock_irqsave(&semaphore_wake_lock, flags);
+	if (sem->sleepers <= 0)
+		atomic_inc(&sem->count);
+	else {
+		sem->sleepers--;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+	return ret;
+}
+
+#endif /* __ASM_SH64_SEMAPHORE_HELPER_H */
diff --git a/include/asm-sh64/semaphore.h b/include/asm-sh64/semaphore.h
new file mode 100644
index 000000000000..fce22bb9a546
--- /dev/null
+++ b/include/asm-sh64/semaphore.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH64_SEMAPHORE_H
+#define __ASM_SH64_SEMAPHORE_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/semaphore.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * SMP- and interrupt-safe semaphores.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * SuperH verison by Niibe Yutaka
+ *  (Currently no asm implementation but generic C code...)
+ *
+ */
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+/*
+ *	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+ *
+ * i'd rather use the more flexible initialization above, but sadly
+ * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well.
+ */
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+#if 0
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+#endif
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+static inline void down(struct semaphore * sem)
+{
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int ret = 0;
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	int ret = 0;
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_trylock(sem);
+	return ret;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ */
+static inline void up(struct semaphore * sem)
+{
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif /* __ASM_SH64_SEMAPHORE_H */
diff --git a/include/asm-sh64/sembuf.h b/include/asm-sh64/sembuf.h
new file mode 100644
index 000000000000..ec4d9f143577
--- /dev/null
+++ b/include/asm-sh64/sembuf.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH64_SEMBUF_H
+#define __ASM_SH64_SEMBUF_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/sembuf.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * The semid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH64_SEMBUF_H */
diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h
new file mode 100644
index 000000000000..8e39b4e90c76
--- /dev/null
+++ b/include/asm-sh64/serial.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define RS_TABLE_SIZE  2
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+/* XXX: This should be moved ino irq.h */
+#define irq_cannonicalize(x) (x)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh64/setup.h b/include/asm-sh64/setup.h
new file mode 100644
index 000000000000..ebd42eb1b709
--- /dev/null
+++ b/include/asm-sh64/setup.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH64_SETUP_H
+#define __ASM_SH64_SETUP_H
+
+#define PARAM ((unsigned char *)empty_zero_page)
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+
+#define COMMAND_LINE ((char *) (PARAM+256))
+#define COMMAND_LINE_SIZE 256
+
+#endif /* __ASM_SH64_SETUP_H */
+
diff --git a/include/asm-sh64/shmbuf.h b/include/asm-sh64/shmbuf.h
new file mode 100644
index 000000000000..022f3494dd64
--- /dev/null
+++ b/include/asm-sh64/shmbuf.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_SH64_SHMBUF_H
+#define __ASM_SH64_SHMBUF_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/shmbuf.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/*
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH64_SHMBUF_H */
diff --git a/include/asm-sh64/shmparam.h b/include/asm-sh64/shmparam.h
new file mode 100644
index 000000000000..d3a99a4dc0e3
--- /dev/null
+++ b/include/asm-sh64/shmparam.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SH64_SHMPARAM_H
+#define __ASM_SH64_SHMPARAM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/shmparam.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <asm/cache.h>
+
+/* attach addr a multiple of this */
+#define	SHMLBA	(cpu_data->dcache.sets * L1_CACHE_BYTES)
+
+#endif /* __ASM_SH64_SHMPARAM_H */
diff --git a/include/asm-sh64/sigcontext.h b/include/asm-sh64/sigcontext.h
new file mode 100644
index 000000000000..6293509d8cc1
--- /dev/null
+++ b/include/asm-sh64/sigcontext.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_SH64_SIGCONTEXT_H
+#define __ASM_SH64_SIGCONTEXT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/sigcontext.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long long sc_regs[63];
+	unsigned long long sc_tregs[8];
+	unsigned long long sc_pc;
+	unsigned long long sc_sr;
+
+	/* FPU registers */
+	unsigned long long sc_fpregs[32];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpvalid;
+};
+
+#endif /* __ASM_SH64_SIGCONTEXT_H */
diff --git a/include/asm-sh64/siginfo.h b/include/asm-sh64/siginfo.h
new file mode 100644
index 000000000000..56ef1da534d7
--- /dev/null
+++ b/include/asm-sh64/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_SIGINFO_H
+#define __ASM_SH64_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __ASM_SH64_SIGINFO_H */
diff --git a/include/asm-sh64/signal.h b/include/asm-sh64/signal.h
new file mode 100644
index 000000000000..77957e9b92d9
--- /dev/null
+++ b/include/asm-sh64/signal.h
@@ -0,0 +1,185 @@
+#ifndef __ASM_SH64_SIGNAL_H
+#define __ASM_SH64_SIGNAL_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/signal.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <linux/types.h>
+#include <asm/processor.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	THREAD_SIZE
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define sigmask(sig)	(1UL << ((sig) - 1))
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_SIGNAL_H */
diff --git a/include/asm-sh64/smp.h b/include/asm-sh64/smp.h
new file mode 100644
index 000000000000..4a4d0da39a84
--- /dev/null
+++ b/include/asm-sh64/smp.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_SH64_SMP_H
+#define __ASM_SH64_SMP_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/smp.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#endif /* __ASM_SH64_SMP_H */
diff --git a/include/asm-sh64/socket.h b/include/asm-sh64/socket.h
new file mode 100644
index 000000000000..1853f7246ab0
--- /dev/null
+++ b/include/asm-sh64/socket.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_SOCKET_H
+#define __ASM_SH64_SOCKET_H
+
+#include <asm-sh/socket.h>
+
+#endif /* __ASM_SH64_SOCKET_H */
diff --git a/include/asm-sh64/sockios.h b/include/asm-sh64/sockios.h
new file mode 100644
index 000000000000..1ae23ae82977
--- /dev/null
+++ b/include/asm-sh64/sockios.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_SH64_SOCKIOS_H
+#define __ASM_SH64_SOCKIOS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/sockios.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp - linux-specific */
+#endif /* __ASM_SH64_SOCKIOS_H */
diff --git a/include/asm-sh64/spinlock.h b/include/asm-sh64/spinlock.h
new file mode 100644
index 000000000000..296b0c9b24a2
--- /dev/null
+++ b/include/asm-sh64/spinlock.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH64_SPINLOCK_H
+#define __ASM_SH64_SPINLOCK_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/spinlock.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#error "No SMP on SH64"
+
+#endif /* __ASM_SH64_SPINLOCK_H */
diff --git a/include/asm-sh64/stat.h b/include/asm-sh64/stat.h
new file mode 100644
index 000000000000..86f551b1987e
--- /dev/null
+++ b/include/asm-sh64/stat.h
@@ -0,0 +1,88 @@
+#ifndef __ASM_SH64_STAT_H
+#define __ASM_SH64_STAT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/stat.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned short	st_dev;
+	unsigned char	__pad0[10];
+
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned short	st_rdev;
+	unsigned char	__pad3[10];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* __ASM_SH64_STAT_H */
diff --git a/include/asm-sh64/statfs.h b/include/asm-sh64/statfs.h
new file mode 100644
index 000000000000..083fd79b2417
--- /dev/null
+++ b/include/asm-sh64/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_STATFS_H
+#define __ASM_SH64_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_SH64_STATFS_H */
diff --git a/include/asm-sh64/string.h b/include/asm-sh64/string.h
new file mode 100644
index 000000000000..8a7357366ce8
--- /dev/null
+++ b/include/asm-sh64/string.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH64_STRING_H
+#define __ASM_SH64_STRING_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/string.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * Empty on purpose. ARCH SH64 ASM libs are out of the current project scope.
+ *
+ */
+
+#define __HAVE_ARCH_MEMCPY
+
+extern void *memcpy(void *dest, const void *src, size_t count);
+
+#endif
diff --git a/include/asm-sh64/system.h b/include/asm-sh64/system.h
new file mode 100644
index 000000000000..42510e496eb5
--- /dev/null
+++ b/include/asm-sh64/system.h
@@ -0,0 +1,195 @@
+#ifndef __ASM_SH64_SYSTEM_H
+#define __ASM_SH64_SYSTEM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/system.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/registers.h>
+#include <asm/processor.h>
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+extern struct task_struct *sh64_switch_to(struct task_struct *prev,
+					  struct thread_struct *prev_thread,
+					  struct task_struct *next,
+					  struct thread_struct *next_thread);
+
+#define switch_to(prev,next,last) \
+	do {\
+		if (last_task_used_math != next) {\
+			struct pt_regs *regs = next->thread.uregs;\
+			if (regs) regs->sr |= SR_FD;\
+		}\
+		last = sh64_switch_to(prev, &prev->thread, next, &next->thread);\
+	} while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr), 1))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define mb()	__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()	mb()
+#define wmb()	__asm__ __volatile__ ("synco": : :"memory")
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#endif /* CONFIG_SMP */
+
+#define set_rmb(var, value) do { xchg(&var, value); } while (0)
+#define set_mb(var, value) set_rmb(var, value)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/* Interrupt Control */
+#ifndef HARD_CLI
+#define SR_MASK_L 0x000000f0L
+#define SR_MASK_LL 0x00000000000000f0LL
+#else
+#define SR_MASK_L 0x10000000L
+#define SR_MASK_LL 0x0000000010000000LL
+#endif
+
+static __inline__ void local_irq_enable(void)
+{
+	/* cli/sti based on SR.BL */
+	unsigned long long __dummy0, __dummy1=~SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static __inline__ void local_irq_disable(void)
+{
+	/* cli/sti based on SR.BL */
+	unsigned long long __dummy0, __dummy1=SR_MASK_LL;
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+#define local_save_flags(x) 						\
+(__extension__ ({	unsigned long long __dummy=SR_MASK_LL;		\
+	__asm__ __volatile__(						\
+		"getcon	" __SR ", %0\n\t"				\
+		"and	%0, %1, %0"					\
+		: "=&r" (x)						\
+		: "r" (__dummy));}))
+
+#define local_irq_save(x)						\
+(__extension__ ({	unsigned long long __d2=SR_MASK_LL, __d1;	\
+	__asm__ __volatile__(          	         			\
+		"getcon	" __SR ", %1\n\t" 				\
+		"or	%1, r63, %0\n\t"				\
+		"or	%1, %2, %1\n\t"					\
+		"putcon	%1, " __SR "\n\t"    				\
+		"and	%0, %2, %0"    					\
+		: "=&r" (x), "=&r" (__d1)				\
+		: "r" (__d2));}));
+
+#define local_irq_restore(x) do { 					\
+	if ( ((x) & SR_MASK_L) == 0 )		/* dropping to 0 ? */	\
+		local_irq_enable();		/* yes...re-enable */	\
+} while (0)
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	(flags != 0);			\
+})
+
+extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+extern __inline__ unsigned long xchg_u8(volatile unsigned char * m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+		break;
+	case 1:
+		return xchg_u8(ptr, x);
+		break;
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* XXX
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+
+#ifdef CONFIG_SH_ALPHANUMERIC
+/* This is only used for debugging. */
+extern void print_seg(char *file,int line);
+#define PLS() print_seg(__FILE__,__LINE__)
+#else	/* CONFIG_SH_ALPHANUMERIC */
+#define PLS()
+#endif	/* CONFIG_SH_ALPHANUMERIC */
+
+#define PL() printk("@ <%s,%s:%d>\n",__FILE__,__FUNCTION__,__LINE__)
+
+#define arch_align_stack(x) (x)
+
+#endif /* __ASM_SH64_SYSTEM_H */
diff --git a/include/asm-sh64/termbits.h b/include/asm-sh64/termbits.h
new file mode 100644
index 000000000000..86bde5ec1414
--- /dev/null
+++ b/include/asm-sh64/termbits.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_TERMBITS_H
+#define __ASM_SH64_TERMBITS_H
+
+#include <asm-sh/termbits.h>
+
+#endif /* __ASM_SH64_TERMBITS_H */
diff --git a/include/asm-sh64/termios.h b/include/asm-sh64/termios.h
new file mode 100644
index 000000000000..4a9c7fb411bc
--- /dev/null
+++ b/include/asm-sh64/termios.h
@@ -0,0 +1,117 @@
+#ifndef __ASM_SH64_TERMIOS_H
+#define __ASM_SH64_TERMIOS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/termios.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://www.cs.uit.no/~dagb/irda/irda.html */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14
+#define N_HCI		15	/* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_SH64_TERMIOS_H */
diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h
new file mode 100644
index 000000000000..e65f394da472
--- /dev/null
+++ b/include/asm-sh64/thread_info.h
@@ -0,0 +1,87 @@
+#ifndef __ASM_SH64_THREAD_INFO_H
+#define __ASM_SH64_THREAD_INFO_H
+
+/*
+ * SuperH 5 version
+ * Copyright (C) 2003  Paul Mundt
+ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/registers.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	/* Put the 4 32-bit fields together to make asm offsetting easier. */
+	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
+	__u16			cpu;
+
+	mm_segment_t		addr_limit;
+	struct restart_block	restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit     = KERNEL_DS,            \
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+
+	__asm__ __volatile__ ("getcon " __KCR0 ", %0\n\t" : "=r" (ti));
+
+	return ti;
+}
+
+/* thread information allocation */
+
+
+
+#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+#define THREAD_SIZE  8192
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/* thread information flags */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_MEMDIE		4
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_THREAD_INFO_H */
diff --git a/include/asm-sh64/timex.h b/include/asm-sh64/timex.h
new file mode 100644
index 000000000000..af0b79269661
--- /dev/null
+++ b/include/asm-sh64/timex.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH64_TIMEX_H
+#define __ASM_SH64_TIMEX_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/timex.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * sh-5 architecture timex specifications
+ *
+ */
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#define CLOCK_TICK_FACTOR	20	/* Factor of both 1000000 and CLOCK_TICK_RATE */
+#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
+	(1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR)) \
+		<< (SHIFT_SCALE-SHIFT_HZ)) / HZ)
+
+typedef unsigned long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#define vxtime_lock()		do {} while (0)
+#define vxtime_unlock()		do {} while (0)
+
+#endif /* __ASM_SH64_TIMEX_H */
diff --git a/include/asm-sh64/tlb.h b/include/asm-sh64/tlb.h
new file mode 100644
index 000000000000..4979408bd88c
--- /dev/null
+++ b/include/asm-sh64/tlb.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-sh64/tlb.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_SH64_TLB_H
+#define __ASM_SH64_TLB_H
+
+/*
+ * Note! These are mostly unused, we just need the xTLB_LAST_VAR_UNRESTRICTED
+ * for head.S! Once this limitation is gone, we can clean the rest of this up.
+ */
+
+/* ITLB defines */
+#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
+#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
+
+/* DTLB defines */
+#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
+#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
+
+#ifndef __ASSEMBLY__
+
+/**
+ * for_each_dtlb_entry
+ *
+ * @tlb:	TLB entry
+ *
+ * Iterate over free (non-wired) DTLB entries
+ */
+#define for_each_dtlb_entry(tlb)		\
+	for (tlb  = cpu_data->dtlb.first;	\
+	     tlb <= cpu_data->dtlb.last;	\
+	     tlb += cpu_data->dtlb.step)
+
+/**
+ * for_each_itlb_entry
+ *
+ * @tlb:	TLB entry
+ *
+ * Iterate over free (non-wired) ITLB entries
+ */
+#define for_each_itlb_entry(tlb)		\
+	for (tlb  = cpu_data->itlb.first;	\
+	     tlb <= cpu_data->itlb.last;	\
+	     tlb += cpu_data->itlb.step)
+
+/**
+ * __flush_tlb_slot
+ *
+ * @slot:	Address of TLB slot.
+ *
+ * Flushes TLB slot @slot.
+ */
+static inline void __flush_tlb_slot(unsigned long long slot)
+{
+	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
+}
+
+/* arch/sh64/mm/tlb.c */
+extern int sh64_tlb_init(void);
+extern unsigned long long sh64_next_free_dtlb_entry(void);
+extern unsigned long long sh64_get_wired_dtlb_entry(void);
+extern int sh64_put_wired_dtlb_entry(unsigned long long entry);
+
+extern void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, unsigned long asid, unsigned long paddr);
+extern void sh64_teardown_tlb_slot(unsigned long long config_addr);
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma)	\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+
+/*
+ * Flush whole TLBs for MM
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH64_TLB_H */
+
diff --git a/include/asm-sh64/tlbflush.h b/include/asm-sh64/tlbflush.h
new file mode 100644
index 000000000000..15c0719eecc3
--- /dev/null
+++ b/include/asm-sh64/tlbflush.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH64_TLBFLUSH_H
+#define __ASM_SH64_TLBFLUSH_H
+
+#include <asm/pgalloc.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *
+ */
+
+extern void flush_tlb(void);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+}
+
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#endif /* __ASM_SH64_TLBFLUSH_H */
+
diff --git a/include/asm-sh64/topology.h b/include/asm-sh64/topology.h
new file mode 100644
index 000000000000..34211787345f
--- /dev/null
+++ b/include/asm-sh64/topology.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH64_TOPOLOGY_H
+#define __ASM_SH64_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* __ASM_SH64_TOPOLOGY_H */
diff --git a/include/asm-sh64/types.h b/include/asm-sh64/types.h
new file mode 100644
index 000000000000..41d4d2f82aa9
--- /dev/null
+++ b/include/asm-sh64/types.h
@@ -0,0 +1,76 @@
+#ifndef __ASM_SH64_TYPES_H
+#define __ASM_SH64_TYPES_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/types.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+/* DMA addresses come in generic and 64-bit flavours.  */
+
+#ifdef CONFIG_HIGHMEM64G
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define BITS_PER_LONG 32
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH64_TYPES_H */
diff --git a/include/asm-sh64/uaccess.h b/include/asm-sh64/uaccess.h
new file mode 100644
index 000000000000..a33654d576a1
--- /dev/null
+++ b/include/asm-sh64/uaccess.h
@@ -0,0 +1,327 @@
+#ifndef __ASM_SH64_UACCESS_H
+#define __ASM_SH64_UACCESS_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/uaccess.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(0x80000000)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()        (current_thread_info()->addr_limit)
+#define set_fs(x)       (current_thread_info()->addr_limit=(x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
+
+#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As MIPS uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x,ptr,ret) ({ \
+if (put_user(x,ptr)) return ret; })
+
+#define get_user_ret(x,ptr,ret) ({ \
+if (get_user(x,ptr)) return ret; })
+
+#define __put_user_ret(x,ptr,ret) ({ \
+if (__put_user(x,ptr)) return ret; })
+
+#define __get_user_ret(x,ptr,ret) ({ \
+if (__get_user(x,ptr)) return ret; })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __get_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __get_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __get_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __get_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_addr = (long)(ptr);				\
+	long __gu_err;						\
+	__typeof(*(ptr)) __gu_val;				\
+	__asm__ ("":"=r" (__gu_val));				\
+	__asm__ ("":"=r" (__gu_err));				\
+	__get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
+	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)				\
+({								\
+	long __gu_addr = (long)(ptr);				\
+	long __gu_err = -EFAULT;				\
+	__typeof(*(ptr)) __gu_val;				\
+	__asm__ ("":"=r" (__gu_val));				\
+	__asm__ ("":"=r" (__gu_err));				\
+	if (__access_ok(__gu_addr, (size)))			\
+		__get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
+	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	__gu_err;						\
+})
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __put_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __put_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __put_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __put_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__put_user_unknown();				\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __pu_val = (x);			\
+	__put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	long __pu_addr = (long)(ptr);				\
+	__typeof__(*(ptr)) __pu_val = (x);			\
+								\
+	if (__access_ok(__pu_addr, (size)))			\
+		__put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
+	__pu_err;						\
+})
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+/* XXX: should be such that: 4byte and the rest. */
+extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
+
+#define copy_to_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define copy_to_user_ret(to,from,n,retval) ({ \
+if (copy_to_user(to,from,n)) \
+	return retval; \
+})
+
+#define __copy_to_user(to,from,n)		\
+	__copy_user((void *)(to),		\
+		    (void *)(from), n)
+
+#define __copy_to_user_ret(to,from,n,retval) ({ \
+if (__copy_to_user(to,from,n)) \
+	return retval; \
+})
+
+#define copy_from_user(to,from,n) ({ \
+void *__copy_to = (void *) (to); \
+void *__copy_from = (void *) (from); \
+__kernel_size_t __copy_size = (__kernel_size_t) (n); \
+__kernel_size_t __copy_res; \
+if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
+__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
+} else __copy_res = __copy_size; \
+__copy_res; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ \
+if (copy_from_user(to,from,n)) \
+	return retval; \
+})
+
+#define __copy_from_user(to,from,n)		\
+	__copy_user((void *)(to),		\
+		    (void *)(from), n)
+
+#define __copy_from_user_ret(to,from,n,retval) ({ \
+if (__copy_from_user(to,from,n)) \
+	return retval; \
+})
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/* XXX: Not sure it works well..
+   should be such that: 4byte clear and the rest. */
+extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n) ({ \
+void * __cl_addr = (addr); \
+unsigned long __cl_size = (n); \
+if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
+__cl_size = __clear_user(__cl_addr, __cl_size); \
+__cl_size; })
+
+extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
+
+#define strncpy_from_user(dest,src,count) ({ \
+unsigned long __sfu_src = (unsigned long) (src); \
+int __sfu_count = (int) (count); \
+long __sfu_res = -EFAULT; \
+if(__access_ok(__sfu_src, __sfu_count)) { \
+__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
+} __sfu_res; })
+
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+
+/*
+ * Return the size of a string (including the ending 0!)
+ */
+extern long __strnlen_user(const char *__s, long __n);
+
+extern __inline__ long strnlen_user(const char *s, long n)
+{
+	if (!__addr_ok(s))
+		return 0;
+	else
+		return __strnlen_user(s, n);
+}
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+#define ARCH_HAS_SEARCH_EXTABLE
+
+/* If gcc inlines memset, it will use st.q instructions.  Therefore, we need
+   kmalloc allocations to be 8-byte aligned.  Without this, the alignment
+   becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on
+   sh64 at the moment). */
+#define ARCH_KMALLOC_MINALIGN 8
+
+/*
+ * We want 8-byte alignment for the slab caches as well, otherwise we have
+ * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create().
+ */
+#define ARCH_SLAB_MINALIGN 8
+
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+extern unsigned long search_exception_table(unsigned long addr);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+#endif /* __ASM_SH64_UACCESS_H */
diff --git a/include/asm-sh64/ucontext.h b/include/asm-sh64/ucontext.h
new file mode 100644
index 000000000000..cf77a08551ca
--- /dev/null
+++ b/include/asm-sh64/ucontext.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_SH64_UCONTEXT_H
+#define __ASM_SH64_UCONTEXT_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/ucontext.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_SH64_UCONTEXT_H */
diff --git a/include/asm-sh64/unaligned.h b/include/asm-sh64/unaligned.h
new file mode 100644
index 000000000000..74481b186ae8
--- /dev/null
+++ b/include/asm-sh64/unaligned.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH64_UNALIGNED_H
+#define __ASM_SH64_UNALIGNED_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/unaligned.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <asm-generic/unaligned.h>
+
+#endif /* __ASM_SH64_UNALIGNED_H */
diff --git a/include/asm-sh64/unistd.h b/include/asm-sh64/unistd.h
new file mode 100644
index 000000000000..95f0b130405c
--- /dev/null
+++ b/include/asm-sh64/unistd.h
@@ -0,0 +1,560 @@
+#ifndef __ASM_SH64_UNISTD_H
+#define __ASM_SH64_UNISTD_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/unistd.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file contains the system call numbers.
+ *
+ */
+
+#define __NR_setup		  0	/* used only by init, to get system going */
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit	 	 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102	/* old implementation of socket systemcall */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+/* Non-multiplexed socket family */
+#define __NR_socket		220
+#define __NR_bind		221
+#define __NR_connect		222
+#define __NR_listen		223
+#define __NR_accept		224
+#define __NR_getsockname	225
+#define __NR_getpeername	226
+#define __NR_socketpair		227
+#define __NR_send		228
+#define __NR_sendto		229
+#define __NR_recv		230
+#define __NR_recvfrom		231
+#define __NR_shutdown		232
+#define __NR_setsockopt		233
+#define __NR_getsockopt		234
+#define __NR_sendmsg		235
+#define __NR_recvmsg		236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop		237
+#define __NR_semget		238
+#define __NR_semctl		239
+#define __NR_msgsnd		240
+#define __NR_msgrcv		241
+#define __NR_msgget		242
+#define __NR_msgctl		243
+#if 0
+#define __NR_shmatcall		244
+#endif
+#define __NR_shmdt		245
+#define __NR_shmget		246
+#define __NR_shmctl		247
+
+#define __NR_getdents64		248
+#define __NR_fcntl64		249
+/* 223 is unused */
+#define __NR_gettid		252
+#define __NR_readahead		253
+#define __NR_setxattr		254
+#define __NR_lsetxattr		255
+#define __NR_fsetxattr		256
+#define __NR_getxattr		257
+#define __NR_lgetxattr		258
+#define __NR_fgetxattr		269
+#define __NR_listxattr		260
+#define __NR_llistxattr		261
+#define __NR_flistxattr		262
+#define __NR_removexattr	263
+#define __NR_lremovexattr	264
+#define __NR_fremovexattr	265
+#define __NR_tkill		266
+#define __NR_sendfile64		267
+#define __NR_futex		268
+#define __NR_sched_setaffinity	269
+#define __NR_sched_getaffinity	270
+#define __NR_set_thread_area	271
+#define __NR_get_thread_area	272
+#define __NR_io_setup		273
+#define __NR_io_destroy		274
+#define __NR_io_getevents	275
+#define __NR_io_submit		276
+#define __NR_io_cancel		277
+#define __NR_fadvise64		278
+#define __NR_exit_group		280
+
+#define __NR_lookup_dcookie	281
+#define __NR_epoll_create	282
+#define __NR_epoll_ctl		283
+#define __NR_epoll_wait		284
+#define __NR_remap_file_pages	285
+#define __NR_set_tid_address	286
+#define __NR_timer_create	287
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		296
+#define __NR_fstatfs64		297
+#define __NR_tgkill		298
+#define __NR_utimes		299
+#define __NR_fadvise64_64	300
+#define __NR_vserver		301
+#define __NR_mbind              302
+#define __NR_get_mempolicy      303
+#define __NR_set_mempolicy      304
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_sys_kexec_load	311
+#define __NR_waitid		312
+#define __NR_add_key		313
+#define __NR_request_key	314
+#define __NR_keyctl		315
+
+#define NR_syscalls 316
+
+/* user-visible error numbers are in the range -1 - -125: see <asm-sh64/errno.h> */
+
+#define __syscall_return(type, res) \
+do { \
+	/* Note: when returning from kernel the return value is in r9	    \
+	**       This prevents conflicts between return value and arg1      \
+	**       when dispatching signal handler, in other words makes	    \
+	**       life easier in the system call epilogue (see entry.S)      \
+	*/								    \
+        register unsigned long __sr2 __asm__ ("r2") = res;		    \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+		errno = -(res);						    \
+		__sr2 = -1; 						    \
+	} \
+	return (type) (__sr2); 						    \
+} while (0)
+
+/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x10 << 16) | __NR_##name); \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "()"			    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0) ); 						    \
+__syscall_return(type,__sc0); 						    \
+}
+
+	/*
+	 * The apparent spurious "dummy" assembler comment is *needed*,
+	 * as without it, the compiler treats the arg<n> variables
+	 * as no longer live just before the asm. The compiler can
+	 * then optimize the storage into any registers it wishes.
+	 * The additional dummy statement forces the compiler to put
+	 * the arguments into the correct registers before the TRAPA.
+	 */
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x11 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2)"		    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2));					    \
+__asm__ __volatile__ ("!dummy	%0 %1"				   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2));					    \
+__syscall_return(type,__sc0); 						    \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x12 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+register unsigned long __sc3 __asm__ ("r3") = (unsigned long) arg2;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2,%3)"		    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3) );			    \
+__asm__ __volatile__ ("!dummy	%0 %1 %2"			   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3) );			    \
+__syscall_return(type,__sc0); 						    \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x13 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+register unsigned long __sc3 __asm__ ("r3") = (unsigned long) arg2;	    \
+register unsigned long __sc4 __asm__ ("r4") = (unsigned long) arg3;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2,%3,%4)"		    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) );		    \
+__asm__ __volatile__ ("!dummy	%0 %1 %2 %3"			   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) );	   	    \
+__syscall_return(type,__sc0); 						    \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x14 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+register unsigned long __sc3 __asm__ ("r3") = (unsigned long) arg2;	    \
+register unsigned long __sc4 __asm__ ("r4") = (unsigned long) arg3;	    \
+register unsigned long __sc5 __asm__ ("r5") = (unsigned long) arg4;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2,%3,%4,%5)"	    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5) );\
+__asm__ __volatile__ ("!dummy	%0 %1 %2 %3 %4"			   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5) );\
+__syscall_return(type,__sc0); 						    \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x15 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+register unsigned long __sc3 __asm__ ("r3") = (unsigned long) arg2;	    \
+register unsigned long __sc4 __asm__ ("r4") = (unsigned long) arg3;	    \
+register unsigned long __sc5 __asm__ ("r5") = (unsigned long) arg4;	    \
+register unsigned long __sc6 __asm__ ("r6") = (unsigned long) arg5;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2,%3,%4,%5,%6)"	    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5),  \
+	  "r" (__sc6));							    \
+__asm__ __volatile__ ("!dummy	%0 %1 %2 %3 %4 %5"		   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5),  \
+	  "r" (__sc6));							    \
+__syscall_return(type,__sc0); 						    \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5, type6, arg6) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
+{ \
+register unsigned long __sc0 __asm__ ("r9") = ((0x16 << 16) | __NR_##name); \
+register unsigned long __sc2 __asm__ ("r2") = (unsigned long) arg1;	    \
+register unsigned long __sc3 __asm__ ("r3") = (unsigned long) arg2;	    \
+register unsigned long __sc4 __asm__ ("r4") = (unsigned long) arg3;	    \
+register unsigned long __sc5 __asm__ ("r5") = (unsigned long) arg4;	    \
+register unsigned long __sc6 __asm__ ("r6") = (unsigned long) arg5;	    \
+register unsigned long __sc7 __asm__ ("r7") = (unsigned long) arg6;	    \
+__asm__ __volatile__ ("trapa	%1 !\t\t\t" #name "(%2,%3,%4,%5,%6,%7)"	    \
+	: "=r" (__sc0) 							    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5),  \
+	  "r" (__sc6), "r" (__sc7));					    \
+__asm__ __volatile__ ("!dummy	%0 %1 %2 %3 %4 %5 %6"		   	    \
+	:								    \
+	: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4), "r" (__sc5),  \
+	  "r" (__sc6), "r" (__sc7));					    \
+__syscall_return(type,__sc0); 						    \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+/* Copy from sh */
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static inline _syscall0(int,pause)
+static inline _syscall1(int,setup,int,magic)
+static inline _syscall0(int,sync)
+static inline _syscall0(pid_t,setsid)
+static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static inline _syscall1(int,dup,int,fd)
+static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+static inline _syscall1(int,close,int,fd)
+static inline _syscall1(int,_exit,int,exitcode)
+static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static inline _syscall1(int,delete_module,const char *,name)
+
+static inline pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __ASM_SH64_UNISTD_H */
diff --git a/include/asm-sh64/user.h b/include/asm-sh64/user.h
new file mode 100644
index 000000000000..8f32f39a8ca9
--- /dev/null
+++ b/include/asm-sh64/user.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH64_USER_H
+#define __ASM_SH64_USER_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/user.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ */
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+struct user_fpu_struct {
+        unsigned long long fp_regs[32];
+	unsigned int fpscr;
+};
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
+	int u_fpvalid;		/* True if math co-processor being used */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_SH64_USER_H */
diff --git a/include/asm-sparc/a.out.h b/include/asm-sparc/a.out.h
new file mode 100644
index 000000000000..e4e83eb0161e
--- /dev/null
+++ b/include/asm-sparc/a.out.h
@@ -0,0 +1,98 @@
+/* $Id: a.out.h,v 1.13 2000/01/09 10:46:53 anton Exp $ */
+#ifndef __SPARC_A_OUT_H__
+#define __SPARC_A_OUT_H__
+
+#define SPARC_PGSIZE    0x2000        /* Thanks to the sun4 architecture... */
+#define SEGMENT_SIZE    SPARC_PGSIZE  /* whee... */
+
+struct exec {
+	unsigned char a_dynamic:1;      /* A __DYNAMIC is in this image */
+	unsigned char a_toolversion:7;
+	unsigned char a_machtype;
+	unsigned short a_info;
+	unsigned long a_text;		/* length of text, in bytes */
+	unsigned long a_data;		/* length of data, in bytes */
+	unsigned long a_bss;		/* length of bss, in bytes */
+	unsigned long a_syms;		/* length of symbol table, in bytes */
+	unsigned long a_entry;		/* where program begins */
+	unsigned long a_trsize;
+	unsigned long a_drsize;
+};
+
+/* Where in the file does the text information begin? */
+#define N_TXTOFF(x)     (N_MAGIC(x) == ZMAGIC ? 0 : sizeof (struct exec))
+
+/* Where do the Symbols start? */
+#define N_SYMOFF(x)     (N_TXTOFF(x) + (x).a_text +   \
+                         (x).a_data + (x).a_trsize +  \
+                         (x).a_drsize)
+
+/* Where does text segment go in memory after being loaded? */
+#define N_TXTADDR(x)    (((N_MAGIC(x) == ZMAGIC) &&        \
+	                 ((x).a_entry < SPARC_PGSIZE)) ?   \
+                          0 : SPARC_PGSIZE)
+
+/* And same for the data segment.. */
+#define N_DATADDR(x) (N_MAGIC(x)==OMAGIC ?         \
+                      (N_TXTADDR(x) + (x).a_text)  \
+                       : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+/*
+ * Sparc relocation types
+ */
+enum reloc_type
+{
+	RELOC_8,
+	RELOC_16,
+	RELOC_32,	/* simplest relocs */
+	RELOC_DISP8,
+	RELOC_DISP16,
+	RELOC_DISP32,	/* Disp's (pc-rel) */
+	RELOC_WDISP30,
+	RELOC_WDISP22,  /* SR word disp's */
+	RELOC_HI22,
+	RELOC_22,	/* SR 22-bit relocs */
+	RELOC_13,
+	RELOC_LO10,	/* SR 13&10-bit relocs */
+	RELOC_SFA_BASE,
+	RELOC_SFA_OFF13, /* SR S.F.A. relocs */
+	RELOC_BASE10,
+	RELOC_BASE13,
+	RELOC_BASE22,	/* base_relative pic */
+	RELOC_PC10,
+	RELOC_PC22,	/* special pc-rel pic */
+	RELOC_JMP_TBL,	/* jmp_tbl_rel in pic */
+	RELOC_SEGOFF16,	/* ShLib offset-in-seg */
+	RELOC_GLOB_DAT,
+	RELOC_JMP_SLOT,
+	RELOC_RELATIVE 	/* rtld relocs */
+};
+
+/*
+ * Format of a relocation datum.
+ */
+struct relocation_info /* used when header.a_machtype == M_SPARC */
+{
+        unsigned long   r_address;  /* relocation addr */
+        unsigned int    r_index:24; /* segment index or symbol index */
+        unsigned int    r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */
+        int             r_pad:2;    /* <unused> */
+        enum reloc_type r_type:5;   /* type of relocation to perform */
+        long            r_addend;   /* addend for relocation value */
+};
+
+#define N_RELOCATION_INFO_DECLARED 1
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
+
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC_A_OUT_H__ */
diff --git a/include/asm-sparc/apc.h b/include/asm-sparc/apc.h
new file mode 100644
index 000000000000..24e9a7d4d97e
--- /dev/null
+++ b/include/asm-sparc/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC	'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)	/* Get fan speed	*/
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)	/* Set fan speed	*/
+
+#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)	/* Get CPOWER state	*/
+#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)	/* Set CPOWER state	*/
+
+#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int)	/* Get BPORT state 	*/
+#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int)	/* Set BPORT state	*/
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG	0x00
+#define APC_FANCTL_REG	0x20
+#define APC_CPOWER_REG	0x24
+#define APC_BPORT_REG	0x30
+
+#define APC_REGMASK		0x01
+#define APC_BPMASK		0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON		0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI	0x00	/* Fan speed high	*/
+#define APC_FANCTL_LO	0x01	/* Fan speed low	*/
+
+/*
+ * CPWR - Convenience power outlet state values 
+ */
+#define APC_CPOWER_ON	0x00	/* Conv power on	*/
+#define APC_CPOWER_OFF	0x01	/* Conv power off	*/
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ * 
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A		0x01	/* Bit Port A		*/
+#define APC_BPORT_B		0x02	/* Bit Port B		*/
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h
new file mode 100644
index 000000000000..58c3754da926
--- /dev/null
+++ b/include/asm-sparc/asi.h
@@ -0,0 +1,112 @@
+/* $Id: asi.h,v 1.18 1998/03/09 14:04:46 jj Exp $ */
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h:  Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1           0x00
+#define ASI_NULL2           0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL         0x02
+#define ASI_SEGMAP          0x03
+#define ASI_PTE             0x04
+#define ASI_HWFLUSHSEG      0x05
+#define ASI_HWFLUSHPAGE     0x06
+#define ASI_REGMAP          0x06
+#define ASI_HWFLUSHCONTEXT  0x07
+
+#define ASI_USERTXT         0x08
+#define ASI_KERNELTXT       0x09
+#define ASI_USERDATA        0x0a
+#define ASI_KERNELDATA      0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG        0x0c
+#define ASI_FLUSHPG         0x0d
+#define ASI_FLUSHCTX        0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write;        */
+/* ss = Single Size, as = All Sizes;        */
+#define ASI_M_RES00         0x00   /* Don't touch... */
+#define ASI_M_UNA01         0x01   /* Same here... */
+#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY         0x17   /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL         0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
+#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
+#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
+#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
+#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
+#define ASI_M_SBUS         0x2E   /* Direct SBus access */
+#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR   0x36
+#define ASI_M_DC_FLCLEAR   0x37
+
+#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1  0x40	  /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
+
+#endif /* _SPARC_ASI_H */
diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h
new file mode 100644
index 000000000000..0d4b65bd252b
--- /dev/null
+++ b/include/asm-sparc/asmmacro.h
@@ -0,0 +1,46 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <linux/config.h>
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+	rd	%tbr, %reg; \
+	srl	%reg, 12, %reg; \
+	and	%reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+	lda	[%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose.  It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+	sethi	%hi(trap_setup), %l4; \
+	jmpl	%l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+	SAVE_ALL_HEAD \
+	 nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+   likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa	lduha
+#define stXa	stha
+#else
+#define lduXa	lduba
+#define stXa	stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
new file mode 100644
index 000000000000..37f6ab601c3d
--- /dev/null
+++ b/include/asm-sparc/atomic.h
@@ -0,0 +1,158 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/config.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)  { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v)          ((v)->counter)
+
+#define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v)		((void)__atomic_add_return(        1, (v)))
+#define atomic_dec(v)		((void)__atomic_add_return(       -1, (v)))
+
+#define atomic_add_return(i, v)	(__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v)	(__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v)	(__atomic_add_return(        1, (v)))
+#define atomic_dec_return(v)	(__atomic_add_return(       -1, (v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+/* This is the old 24-bit implementation.  It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i)  { (i) }
+#define atomic24_read(v)          ((v)->counter)
+#define atomic24_set(v, i)        (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift.  It looks like this:
+ *
+ *	----------------------------------------
+ *	| signed 24-bit counter value |  lock  |  atomic_t
+ *	----------------------------------------
+ *	 31                          8 7      0
+ */
+
+#define ATOMIC24_INIT(i)	{ ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+	int ret = v->counter;
+
+	while(ret & 0xff)
+		ret = v->counter;
+
+	return ret >> 8;
+}
+
+#define atomic24_set(v, i)	(((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_add\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h
new file mode 100644
index 000000000000..cf16173f521b
--- /dev/null
+++ b/include/asm-sparc/audioio.h
@@ -0,0 +1,234 @@
+/*
+ * include/asm-sparc/audioio.h
+ *
+ * Sparc Audio Midlayer
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
+ */
+
+#ifndef _AUDIOIO_H_
+#define _AUDIOIO_H_
+
+/*
+ *	SunOS/Solaris /dev/audio interface
+ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/ioctl.h>
+#endif
+
+/*
+ * This structure contains state information for audio device IO streams.
+ */
+typedef struct audio_prinfo {
+	/*
+	 * The following values describe the audio data encoding.
+	 */
+	unsigned int sample_rate;	/* samples per second */
+	unsigned int channels;	/* number of interleaved channels */
+	unsigned int precision;	/* bit-width of each sample */
+	unsigned int encoding;	/* data encoding method */
+
+	/*
+	 * The following values control audio device configuration
+	 */
+	unsigned int gain;		/* gain level: 0 - 255 */
+	unsigned int port;		/* selected I/O port (see below) */
+	unsigned int avail_ports;	/* available I/O ports (see below) */
+	unsigned int _xxx[2];		/* Reserved for future use */
+
+	unsigned int buffer_size;	/* I/O buffer size */
+
+	/*
+	 * The following values describe driver state
+	 */
+	unsigned int samples;		/* number of samples converted */
+	unsigned int eof;		/* End Of File counter (play only) */
+
+	unsigned char	pause;		/* non-zero for pause, zero to resume */
+	unsigned char	error;		/* non-zero if overflow/underflow */
+	unsigned char	waiting;	/* non-zero if a process wants access */
+	unsigned char balance;	/* stereo channel balance */
+
+	unsigned short minordev;
+
+	/*
+	 * The following values are read-only state flags
+	 */
+	unsigned char open;		/* non-zero if open access permitted */
+	unsigned char active;		/* non-zero if I/O is active */
+} audio_prinfo_t;
+
+
+/*
+ * This structure describes the current state of the audio device.
+ */
+typedef struct audio_info {
+	/*
+	 * Per-stream information
+	 */
+	audio_prinfo_t play;	/* output status information */
+	audio_prinfo_t record;	/* input status information */
+
+	/*
+	 * Per-unit/channel information
+	 */
+	unsigned int monitor_gain;	/* input to output mix: 0 - 255 */
+	unsigned char output_muted;	/* non-zero if output is muted */
+	unsigned char _xxx[3];	/* Reserved for future use */
+	unsigned int _yyy[3];		/* Reserved for future use */
+} audio_info_t;
+
+
+/*
+ * Audio encoding types
+ */
+#define	AUDIO_ENCODING_NONE	(0)	/* no encoding assigned	  */
+#define	AUDIO_ENCODING_ULAW	(1)	/* u-law encoding	  */
+#define	AUDIO_ENCODING_ALAW	(2)	/* A-law encoding	  */
+#define	AUDIO_ENCODING_LINEAR	(3)	/* Linear PCM encoding	  */
+#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
+#define	AUDIO_ENCODING_DVI	(104)	/* DVI ADPCM		  */
+#define	AUDIO_ENCODING_LINEAR8	(105)	/* 8 bit UNSIGNED	  */
+#define	AUDIO_ENCODING_LINEARLE	(106)	/* Linear PCM LE encoding */
+
+/*
+ * These ranges apply to record, play, and monitor gain values
+ */
+#define	AUDIO_MIN_GAIN	(0)	/* minimum gain value */
+#define	AUDIO_MAX_GAIN	(255)	/* maximum gain value */
+
+/*
+ * These values apply to the balance field to adjust channel gain values
+ */
+#define	AUDIO_LEFT_BALANCE	(0)	/* left channel only	*/
+#define	AUDIO_MID_BALANCE	(32)	/* equal left/right channel */
+#define	AUDIO_RIGHT_BALANCE	(64)	/* right channel only	*/
+#define	AUDIO_BALANCE_SHIFT	(3)
+
+/*
+ * Generic minimum/maximum limits for number of channels, both modes
+ */
+#define	AUDIO_MIN_PLAY_CHANNELS	(1)
+#define	AUDIO_MAX_PLAY_CHANNELS	(4)
+#define	AUDIO_MIN_REC_CHANNELS	(1)
+#define	AUDIO_MAX_REC_CHANNELS	(4)
+
+/*
+ * Generic minimum/maximum limits for sample precision
+ */
+#define	AUDIO_MIN_PLAY_PRECISION	(8)
+#define	AUDIO_MAX_PLAY_PRECISION	(32)
+#define	AUDIO_MIN_REC_PRECISION		(8)
+#define	AUDIO_MAX_REC_PRECISION		(32)
+
+/*
+ * Define some convenient names for typical audio ports
+ */
+/*
+ * output ports (several may be enabled simultaneously)
+ */
+#define	AUDIO_SPEAKER		0x01	/* output to built-in speaker */
+#define	AUDIO_HEADPHONE		0x02	/* output to headphone jack */
+#define	AUDIO_LINE_OUT		0x04	/* output to line out	 */
+
+/*
+ * input ports (usually only one at a time)
+ */
+#define	AUDIO_MICROPHONE	0x01	/* input from microphone */
+#define	AUDIO_LINE_IN		0x02	/* input from line in	 */
+#define	AUDIO_CD		0x04	/* input from on-board CD inputs */
+#define	AUDIO_INTERNAL_CD_IN	AUDIO_CD	/* input from internal CDROM */
+#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
+
+
+/*
+ * This macro initializes an audio_info structure to 'harmless' values.
+ * Note that (~0) might not be a harmless value for a flag that was
+ * a signed int.
+ */
+#define	AUDIO_INITINFO(i)	{					\
+	unsigned int	*__x__;						\
+	for (__x__ = (unsigned int *)(i);				\
+	    (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));	\
+	    *__x__++ = ~0);						\
+}
+
+/*
+ * These allow testing for what the user wants to set 
+ */
+#define AUD_INITVALUE   (~0)
+#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
+#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
+#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
+
+/*
+ * Parameter for the AUDIO_GETDEV ioctl to determine current
+ * audio devices.
+ */
+#define	MAX_AUDIO_DEV_LEN	(16)
+typedef struct audio_device {
+	char name[MAX_AUDIO_DEV_LEN];
+	char version[MAX_AUDIO_DEV_LEN];
+	char config[MAX_AUDIO_DEV_LEN];
+} audio_device_t;
+
+
+/*
+ * Ioctl calls for the audio device.
+ */
+
+/*
+ * AUDIO_GETINFO retrieves the current state of the audio device.
+ *
+ * AUDIO_SETINFO copies all fields of the audio_info structure whose
+ * values are not set to the initialized value (-1) to the device state.
+ * It performs an implicit AUDIO_GETINFO to return the new state of the
+ * device.  Note that the record.samples and play.samples fields are set
+ * to the last value before the AUDIO_SETINFO took effect.  This allows
+ * an application to reset the counters while atomically retrieving the
+ * last value.
+ *
+ * AUDIO_DRAIN suspends the calling process until the write buffers are
+ * empty.
+ *
+ * AUDIO_GETDEV returns a structure of type audio_device_t which contains
+ * three strings.  The string "name" is a short identifying string (for
+ * example, the SBus Fcode name string), the string "version" identifies
+ * the current version of the device, and the "config" string identifies
+ * the specific configuration of the audio stream.  All fields are
+ * device-dependent -- see the device specific manual pages for details.
+ *
+ * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
+ * herein (making it not too portable)
+ *
+ * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
+ * resets error counters, and restarts recording and playback as appropriate
+ * for the current sampling mode.
+ */
+#define	AUDIO_GETINFO	_IOR('A', 1, audio_info_t)
+#define	AUDIO_SETINFO	_IOWR('A', 2, audio_info_t)
+#define	AUDIO_DRAIN	_IO('A', 3)
+#define	AUDIO_GETDEV	_IOR('A', 4, audio_device_t)
+#define	AUDIO_GETDEV_SUNOS	_IOR('A', 4, int)
+#define AUDIO_FLUSH     _IO('A', 5)
+
+/* Define possible audio hardware configurations for 
+ * old SunOS-style AUDIO_GETDEV ioctl */
+#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
+#define AUDIO_DEV_AMD           (1)     /* audioamd device */
+#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
+#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
+#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
+
+/*
+ * The following ioctl sets the audio device into an internal loopback mode,
+ * if the hardware supports this.  The argument is TRUE to set loopback,
+ * FALSE to reset to normal operation.  If the hardware does not support
+ * internal loopback, the ioctl should fail with EINVAL.
+ * Causes ADC data to be digitally mixed in and sent to the DAC.
+ */
+#define	AUDIO_DIAG_LOOPBACK	_IOW('A', 101, int)
+
+#endif /* _AUDIOIO_H_ */
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
new file mode 100644
index 000000000000..ee83aefb20dc
--- /dev/null
+++ b/include/asm-sparc/auxio.h
@@ -0,0 +1,89 @@
+/* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/* 
+ * NOTE: these routines are implementation dependent-- 
+ * understand the hardware you are querying! 
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LINK_TEST, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LINK_TEST); \
+	} \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LED, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LED); \
+	} \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define	AUXIO_POWER_DETECT_FAILURE	32
+#define	AUXIO_POWER_CLEAR_FAILURE	2
+#define	AUXIO_POWER_OFF			1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/include/asm-sparc/bitext.h b/include/asm-sparc/bitext.h
new file mode 100644
index 000000000000..297b2f2fcb49
--- /dev/null
+++ b/include/asm-sparc/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+	spinlock_t lock;
+	unsigned long *map;
+	int size;
+	int used;
+	int last_off;
+	int last_size;
+	int first_free;
+	int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
new file mode 100644
index 000000000000..bfbd795a0a80
--- /dev/null
+++ b/include/asm-sparc/bitops.h
@@ -0,0 +1,537 @@
+/* $Id: bitops.h,v 1.67 2001/11/19 18:36:34 davem Exp $
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___set_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+
+	return mask != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___set_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___clear_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+
+	return mask != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___clear_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___change_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+
+	return mask != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	register unsigned long mask asm("g2");
+	register unsigned long *ADDR asm("g1");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g5");
+	register int tmp4 asm("g7");
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___change_bit\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
+	: "0" (mask), "r" (ADDR)
+	: "memory", "cc");
+}
+
+/*
+ * non-atomic versions
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p |= mask;
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p &= ~mask;
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+	*p ^= mask;
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = 1UL << (nr & 0x1f);
+	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+#define smp_mb__before_clear_bit()	do { } while(0)
+#define smp_mb__after_clear_bit()	do { } while(0)
+
+/* The following routine need not be atomic. */
+static inline int test_bit(int nr, __const__ volatile unsigned long *addr)
+{
+	return (1UL & (((unsigned long *)addr)[nr >> 5] >> (nr & 31))) != 0UL;
+}
+
+/* The easy/cheese version for now. */
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while(word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline int __ffs(unsigned long word)
+{
+	int num = 0;
+
+	if ((word & 0xffff) == 0) {
+		num += 16;
+		word >>= 16;
+	}
+	if ((word & 0xff) == 0) {
+		num += 8;
+		word >>= 8;
+	}
+	if ((word & 0xf) == 0) {
+		num += 4;
+		word >>= 4;
+	}
+	if ((word & 0x3) == 0) {
+		num += 2;
+		word >>= 2;
+	}
+	if ((word & 0x1) == 0)
+		num += 1;
+	return num;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	if (!x)
+		return 0;
+	return __ffs((unsigned long)x) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+#define fls(x) generic_fls(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * find_next_zero_bit() finds the first zero bit in a bit string of length
+ * 'size' bits, starting the search at bit 'offset'. This is largely based
+ * on Linus's ALPHA routines, which are pretty portable BTW.
+ */
+static inline unsigned long find_next_zero_bit(const unsigned long *addr,
+    unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)        /* Are any bits zero? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + ffz(tmp);
+}
+
+/*
+ * Linus sez that gcc can optimize the following correctly, we'll see if this
+ * holds on the Sparc as it does for the ALPHA.
+ */
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ *
+ * Scheduler induced bitop, do not use.
+ */
+static inline int find_next_bit(const unsigned long *addr, int size, int offset)
+{
+	const unsigned long *p = addr + (offset >> 5);
+	int num = offset & ~0x1f;
+	unsigned long word;
+
+	word = *p++;
+	word &= ~((1 << (offset & 0x1f)) - 1);
+	while (num < size) {
+		if (word != 0) {
+			return __ffs(word) + num;
+		}
+		word = *p++;
+		num += 0x20;
+	}
+	return num;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+/*
+ */
+static inline int test_le_bit(int nr, __const__ unsigned long * addr)
+{
+	__const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
+	return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * non-atomic versions
+ */
+static inline void __set_le_bit(int nr, unsigned long *addr)
+{
+	unsigned char *ADDR = (unsigned char *)addr;
+
+	ADDR += nr >> 3;
+	*ADDR |= 1 << (nr & 0x07);
+}
+
+static inline void __clear_le_bit(int nr, unsigned long *addr)
+{
+	unsigned char *ADDR = (unsigned char *)addr;
+
+	ADDR += nr >> 3;
+	*ADDR &= ~(1 << (nr & 0x07));
+}
+
+static inline int __test_and_set_le_bit(int nr, unsigned long *addr)
+{
+	int mask, retval;
+	unsigned char *ADDR = (unsigned char *)addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+	return retval;
+}
+
+static inline int __test_and_clear_le_bit(int nr, unsigned long *addr)
+{
+	int mask, retval;
+	unsigned char *ADDR = (unsigned char *)addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+	return retval;
+}
+
+static inline unsigned long find_next_zero_le_bit(const unsigned long *addr,
+    unsigned long size, unsigned long offset)
+{
+	const unsigned long *p = addr + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp = __swab32(tmp) | (~0UL << size);
+	if (tmp == ~0UL)        /* Are any bits zero? */
+		return result + size; /* Nope. */
+	return result + ffz(tmp);
+
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+#define find_first_zero_le_bit(addr, size) \
+        find_next_zero_le_bit((addr), (size), 0)
+
+#define ext2_set_bit(nr,addr)	\
+	__test_and_set_le_bit((nr),(unsigned long *)(addr))
+#define ext2_clear_bit(nr,addr)	\
+	__test_and_clear_le_bit((nr),(unsigned long *)(addr))
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (unsigned long *)(addr)); \
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (unsigned long *)(addr)); \
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_test_bit(nr,addr)	\
+	test_le_bit((nr),(unsigned long *)(addr))
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long *)(addr), (size))
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_le_bit((unsigned long *)(addr), (size), (off))
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)	\
+	test_and_set_bit((nr),(unsigned long *)(addr))
+#define minix_set_bit(nr,addr)		\
+	set_bit((nr),(unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr,addr) \
+	test_and_clear_bit((nr),(unsigned long *)(addr))
+#define minix_test_bit(nr,addr)		\
+	test_bit((nr),(unsigned long *)(addr))
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_bit((unsigned long *)(addr),(size))
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h
new file mode 100644
index 000000000000..3578ac113cf0
--- /dev/null
+++ b/include/asm-sparc/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *	Stephen Williams
+ *	Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATABILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/include/asm-sparc/bsderrno.h b/include/asm-sparc/bsderrno.h
new file mode 100644
index 000000000000..54a75be43abb
--- /dev/null
+++ b/include/asm-sparc/bsderrno.h
@@ -0,0 +1,94 @@
+/* $Id: bsderrno.h,v 1.3 1996/04/25 06:12:47 davem Exp $
+ * bsderrno.h: Error numbers for NetBSD binary compatibility
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_BSDERRNO_H
+#define _SPARC_BSDERRNO_H
+
+#define BSD_EPERM         1      /* Operation not permitted */
+#define BSD_ENOENT        2      /* No such file or directory */
+#define BSD_ESRCH         3      /* No such process */
+#define BSD_EINTR         4      /* Interrupted system call */
+#define BSD_EIO           5      /* Input/output error */
+#define BSD_ENXIO         6      /* Device not configured */
+#define BSD_E2BIG         7      /* Argument list too long */
+#define BSD_ENOEXEC       8      /* Exec format error */
+#define BSD_EBADF         9      /* Bad file descriptor */
+#define BSD_ECHILD        10     /* No child processes */
+#define BSD_EDEADLK       11     /* Resource deadlock avoided */
+#define BSD_ENOMEM        12     /* Cannot allocate memory */
+#define BSD_EACCES        13     /* Permission denied */
+#define BSD_EFAULT        14     /* Bad address */
+#define BSD_ENOTBLK       15     /* Block device required */
+#define BSD_EBUSY         16     /* Device busy */
+#define BSD_EEXIST        17     /* File exists */
+#define BSD_EXDEV         18     /* Cross-device link */
+#define BSD_ENODEV        19     /* Operation not supported by device */
+#define BSD_ENOTDIR       20     /* Not a directory */
+#define BSD_EISDIR        21     /* Is a directory */
+#define BSD_EINVAL        22     /* Invalid argument */
+#define BSD_ENFILE        23     /* Too many open files in system */
+#define BSD_EMFILE        24     /* Too many open files */
+#define BSD_ENOTTY        25     /* Inappropriate ioctl for device */
+#define BSD_ETXTBSY       26     /* Text file busy */
+#define BSD_EFBIG         27     /* File too large */
+#define BSD_ENOSPC        28     /* No space left on device */
+#define BSD_ESPIPE        29     /* Illegal seek */
+#define BSD_EROFS         30     /* Read-only file system */
+#define BSD_EMLINK        31     /* Too many links */
+#define BSD_EPIPE         32     /* Broken pipe */
+#define BSD_EDOM          33     /* Numerical argument out of domain */
+#define BSD_ERANGE        34     /* Result too large */
+#define BSD_EAGAIN        35     /* Resource temporarily unavailable */
+#define BSD_EWOULDBLOCK   EAGAIN /* Operation would block */
+#define BSD_EINPROGRESS   36     /* Operation now in progress */
+#define BSD_EALREADY      37     /* Operation already in progress */
+#define BSD_ENOTSOCK      38     /* Socket operation on non-socket */
+#define BSD_EDESTADDRREQ  39     /* Destination address required */
+#define BSD_EMSGSIZE      40     /* Message too long */
+#define BSD_EPROTOTYPE    41     /* Protocol wrong type for socket */
+#define BSD_ENOPROTOOPT   42     /* Protocol not available */
+#define BSD_EPROTONOSUPPORT  43  /* Protocol not supported */
+#define BSD_ESOCKTNOSUPPORT  44  /* Socket type not supported */
+#define BSD_EOPNOTSUPP    45     /* Operation not supported */
+#define BSD_EPFNOSUPPORT  46     /* Protocol family not supported */
+#define BSD_EAFNOSUPPORT  47     /* Address family not supported by protocol family */
+#define BSD_EADDRINUSE    48     /* Address already in use */
+#define BSD_EADDRNOTAVAIL 49     /* Can't assign requested address */
+#define BSD_ENETDOWN      50     /* Network is down */
+#define BSD_ENETUNREACH   51     /* Network is unreachable */
+#define BSD_ENETRESET     52     /* Network dropped connection on reset */
+#define BSD_ECONNABORTED  53     /* Software caused connection abort */
+#define BSD_ECONNRESET    54     /* Connection reset by peer */
+#define BSD_ENOBUFS       55     /* No buffer space available */
+#define BSD_EISCONN       56     /* Socket is already connected */
+#define BSD_ENOTCONN      57     /* Socket is not connected */
+#define BSD_ESHUTDOWN     58     /* Can't send after socket shutdown */
+#define BSD_ETOOMANYREFS  59     /* Too many references: can't splice */
+#define BSD_ETIMEDOUT     60     /* Operation timed out */
+#define BSD_ECONNREFUSED  61     /* Connection refused */
+#define BSD_ELOOP         62     /* Too many levels of symbolic links */
+#define BSD_ENAMETOOLONG  63     /* File name too long */
+#define BSD_EHOSTDOWN     64     /* Host is down */
+#define BSD_EHOSTUNREACH  65     /* No route to host */
+#define BSD_ENOTEMPTY     66     /* Directory not empty */
+#define BSD_EPROCLIM      67     /* Too many processes */
+#define BSD_EUSERS        68     /* Too many users */
+#define BSD_EDQUOT        69     /* Disc quota exceeded */
+#define BSD_ESTALE        70     /* Stale NFS file handle */
+#define BSD_EREMOTE       71     /* Too many levels of remote in path */
+#define BSD_EBADRPC       72     /* RPC struct is bad */
+#define BSD_ERPCMISMATCH  73     /* RPC version wrong */
+#define BSD_EPROGUNAVAIL  74     /* RPC prog. not avail */
+#define BSD_EPROGMISMATCH 75     /* Program version wrong */
+#define BSD_EPROCUNAVAIL  76     /* Bad procedure for program */
+#define BSD_ENOLCK        77     /* No locks available */
+#define BSD_ENOSYS        78     /* Function not implemented */
+#define BSD_EFTYPE        79     /* Inappropriate file type or format */
+#define BSD_EAUTH         80     /* Authentication error */
+#define BSD_ENEEDAUTH     81     /* Need authenticator */
+#define BSD_ELAST         81     /* Must be equal largest errno */
+
+#endif /* !(_SPARC_BSDERRNO_H) */
diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h
new file mode 100644
index 000000000000..b84c96c89581
--- /dev/null
+++ b/include/asm-sparc/btfixup.h
@@ -0,0 +1,208 @@
+/* $Id: btfixup.h,v 1.4 1998/03/09 14:04:43 jj Exp $
+ *  asm-sparc/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...) 					\
+	extern __type ___f_##__name(__args);						\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) 				\
+	extern __type ___f_##__name(__args) __attribute_const__;			\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)							\
+	extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)							\
+	extern unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	extern __inline__ unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)						\
+	extern unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	extern __inline__ unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)								\
+	extern unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	extern __inline__ unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_HALF_INIT(__name,__val)						\
+	extern unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	extern __inline__ unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)							\
+	extern unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	extern __inline__ unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));		\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)						\
+	extern unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	extern __inline__ unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : 	\
+			 "=r"(ret));							\
+		return ret;								\
+	}
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)								\
+	extern unsigned char ___i_##__name;						\
+	extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM	0x00000000			/* Always call */
+#define BTFIXUPCALL_NOP		0x01000000			/* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)	(0x90102000|((i) & 0x1fff))	/* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)	(0x90122000|((i) & 0x1fff))	/* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0	0x01000000			/* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)	(0x902a2000|((i) & 0x1fff))	/* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1	0xd27a0000			/* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0	0xc07a0000			/* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2	0xc4784000			/* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0	0xc0220000			/* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0	0xd2220000			/* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = (unsigned long)__addr;				\
+		___fs_##__name[2] = __insn;						\
+	} while (0)
+	
+#define BTFIXUPSET_BLACKBOX(__name, __func)						\
+	do {										\
+		___bs_##__name[0] |= 1;							\
+		___bs_##__name[1] = (unsigned long)__func;				\
+	} while (0)
+	
+#define BTFIXUPCOPY_CALL(__name, __from)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = ___fs_##__from[1];					\
+		___fs_##__name[2] = ___fs_##__from[2];					\
+	} while (0)
+		
+#define BTFIXUPSET_SIMM13(__name, __val)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SIMM13(__name, __from)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = ___ss_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_HALF(__name, __val)							\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_HALF(__name, __from)						\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = ___as_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_SETHI(__name, __val)							\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SETHI(__name, __from)						\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = ___hs_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_INT(__name, __val)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_INT(__name, __from)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = ___is_##__from[1];					\
+	} while (0)
+	
+#define BTFIXUPVAL_CALL(__name)								\
+	((unsigned long)___fs_##__name[1])
+	
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)			%hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)	%hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+	
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/include/asm-sparc/bug.h b/include/asm-sparc/bug.h
new file mode 100644
index 000000000000..0d30a67d87a3
--- /dev/null
+++ b/include/asm-sparc/bug.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+/* Only use the inline asm until a gcc release that can handle __builtin_trap
+ * -rob 2003-06-25
+ *
+ * gcc-3.3.1 and later will be OK -DaveM
+ */
+#if (__GNUC__ > 3) || \
+    (__GNUC__ == 3 && __GNUC_MINOR__ > 3) || \
+    (__GNUC__ == 3 && __GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ >= 4)
+#define __bug_trap()		__builtin_trap()
+#else
+#define __bug_trap()					\
+	__asm__ __volatile__ ("t 0x5\n\t" : : )
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {					\
+	do_BUG(__FILE__, __LINE__);			\
+	__bug_trap();				\
+} while (0)
+#else
+#define BUG()		__bug_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h
new file mode 100644
index 000000000000..e652f89e0eff
--- /dev/null
+++ b/include/asm-sparc/bugs.h
@@ -0,0 +1,17 @@
+/*  $Id: bugs.h,v 1.1 1996/12/26 13:25:20 davem Exp $
+ *  include/asm-sparc/bugs.h:  Sparc probes for various bugs.
+ *
+ *  Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/cpudata.h>
+#include <linux/config.h>
+
+extern unsigned long loops_per_jiffy;
+
+static void check_bugs(void)
+{
+#ifndef CONFIG_SMP
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+}
diff --git a/include/asm-sparc/byteorder.h b/include/asm-sparc/byteorder.h
new file mode 100644
index 000000000000..a2949aea48ef
--- /dev/null
+++ b/include/asm-sparc/byteorder.h
@@ -0,0 +1,14 @@
+/* $Id: byteorder.h,v 1.15 1997/12/16 19:20:44 davem Exp $ */
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h
new file mode 100644
index 000000000000..e6316fd7e1a4
--- /dev/null
+++ b/include/asm-sparc/cache.h
@@ -0,0 +1,130 @@
+/* $Id: cache.h,v 1.9 1999/08/14 03:51:58 anton Exp $
+ * cache.h:  Cache specific code for the Sparc.  These include flushing
+ *           and direct tag/data line access.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#include <asm/asi.h>
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+#define L1_CACHE_SHIFT_MAX 5	/* largest L1 which this arch supports */
+
+#define SMP_CACHE_BYTES 32
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space.  The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work.  The code below does not do
+ * any checking, the caller must do so.  These routines are for
+ * diagnostics only, but could end up being useful.  Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum)
+{
+	unsigned int vaddr, retval;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+	return retval;
+}
+
+extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+	unsigned int vaddr;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+			     "memory");
+}
+
+/* Second cache-data access.  The data is returned two-32bit quantities
+ * at a time.
+ */
+extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	__asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+			     "or %%g0, %%g2, %0\n\t"
+			     "or %%g0, %%g3, %1\n\t" :
+			     "=r" (value1), "=r" (value2) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3");
+	data[0] = value1; data[1] = value2;
+}
+
+extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	value1 = data[0]; value2 = data[1];
+	__asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+			     "or %%g0, %1, %%g3\n\t"
+			     "stda %%g2, [%2] %3\n\t" : :
+			     "r" (value1), "r" (value2), 
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE.  Some of the flushes
+ * affect both the ICACHE and the external cache.  Others only clear
+ * the ICACHE entries on the cpu itself.  V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level.  The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+extern __inline__ void flush_ei_page(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+			     "memory");
+}
+
+extern __inline__ void flush_ei_seg(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+			     "memory");
+}
+
+extern __inline__ void flush_ei_region(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+			     "memory");
+}
+
+extern __inline__ void flush_ei_ctx(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+			     "memory");
+}
+
+extern __inline__ void flush_ei_user(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_USER) :
+			     "memory");
+}
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h
new file mode 100644
index 000000000000..4901217008c0
--- /dev/null
+++ b/include/asm-sparc/cacheflush.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>		/* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h>  from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
new file mode 100644
index 000000000000..286158108974
--- /dev/null
+++ b/include/asm-sparc/checksum.h
@@ -0,0 +1,253 @@
+/* $Id: checksum.h,v 1.33 2002/02/01 22:01:05 davem Exp $ */
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+ 
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline unsigned int 
+csum_partial_copy_nocheck (const unsigned char *src, unsigned char *dst, int len,
+			   unsigned int sum)
+{
+	register unsigned int ret asm("o0") = (unsigned int)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+
+	__asm__ __volatile__ (
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" mov %6, %%g7\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l)
+	: "0" (ret), "1" (d), "2" (l), "r" (sum)
+	: "o2", "o3", "o4", "o5", "o7",
+	  "g2", "g3", "g4", "g5", "g7",
+	  "memory", "cc");
+	return ret;
+}
+
+static inline unsigned int 
+csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst, int len,
+			    unsigned int sum, int *err)
+  {
+	if (!access_ok (VERIFY_READ, src, len)) {
+		*err = -EFAULT;
+		memset (dst, 0, len);
+		return sum;
+	} else {
+		register unsigned long ret asm("o0") = (unsigned long)src;
+		register char *d asm("o1") = dst;
+		register int l asm("g1") = len;
+		register unsigned int s asm("g7") = sum;
+
+		__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,2\n\t"
+		".previous\n"
+		"1:\n\t"
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" st %8, [%%sp + 64]\n"
+		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+		: "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+		  "cc", "memory");
+		return ret;
+	}
+  }
+  
+static inline unsigned int 
+csum_partial_copy_to_user(const unsigned char *src, unsigned char __user *dst, int len,
+			  unsigned int sum, int *err)
+{
+	if (!access_ok (VERIFY_WRITE, dst, len)) {
+		*err = -EFAULT;
+		return sum;
+	} else {
+		register unsigned long ret asm("o0") = (unsigned long)src;
+		register char __user *d asm("o1") = dst;
+		register int l asm("g1") = len;
+		register unsigned int s asm("g7") = sum;
+
+		__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,1\n\t"
+		".previous\n"
+		"1:\n\t"
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" st %8, [%%sp + 64]\n"
+		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+		: "o2", "o3", "o4", "o5", "o7",
+		  "g2", "g3", "g4", "g5",
+		  "cc", "memory");
+		return ret;
+	}
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline unsigned short ip_fast_csum(const unsigned char *iph,
+					  unsigned int ihl)
+{
+	unsigned short sum;
+
+	/* Note: We must read %2 before we touch %0 for the first time,
+	 *       because GCC can legitimately use the same register for
+	 *       both operands.
+	 */
+	__asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+			     "ld\t[%1 + 0x00], %0\n\t"
+			     "ld\t[%1 + 0x04], %%g2\n\t"
+			     "ld\t[%1 + 0x08], %%g3\n\t"
+			     "addcc\t%%g2, %0, %0\n\t"
+			     "addxcc\t%%g3, %0, %0\n\t"
+			     "ld\t[%1 + 0x0c], %%g2\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n\t"
+			     "addxcc\t%%g2, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n"
+			     "1:\taddcc\t%%g3, %0, %0\n\t"
+			     "add\t%1, 4, %1\n\t"
+			     "addxcc\t%0, %%g0, %0\n\t"
+			     "subcc\t%%g4, 1, %%g4\n\t"
+			     "be,a\t2f\n\t"
+			     "sll\t%0, 16, %%g2\n\t"
+			     "b\t1b\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n"
+			     "2:\taddcc\t%0, %%g2, %%g2\n\t"
+			     "srl\t%%g2, 16, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     "xnor\t%%g0, %0, %0"
+			     : "=r" (sum), "=&r" (iph)
+			     : "r" (ihl), "1" (iph)
+			     : "g2", "g3", "g4", "cc");
+	return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+			     "srl\t%1, 16, %1\n\t"
+			     "addx\t%1, %%g0, %1\n\t"
+			     "xnor\t%%g0, %1, %0"
+			     : "=&r" (sum), "=r" (tmp)
+			     : "0" (sum), "1" (sum<<16)
+			     : "cc");
+	return sum;
+}
+
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+					       unsigned long daddr,
+					       unsigned int len,
+					       unsigned short proto,
+					       unsigned int sum)
+{
+	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+			     "addxcc\t%2, %0, %0\n\t"
+			     "addxcc\t%3, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     : "=r" (sum), "=r" (saddr)
+			     : "r" (daddr), "r" ((proto<<16)+len), "0" (sum),
+			       "1" (saddr)
+			     : "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum) 
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						 struct in6_addr *daddr,
+						 __u32 len,
+						 unsigned short proto,
+						 unsigned int sum) 
+{
+	__asm__ __volatile__ (
+		"addcc	%3, %4, %%g4\n\t"
+		"addxcc	%5, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x0c], %%g2\n\t"
+		"ld	[%2 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x0c], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"addxcc	%%g3, %%g4, %0\n\t"
+		"addx	0, %0, %0\n"
+		: "=&r" (sum)
+		: "r" (saddr), "r" (daddr), 
+		  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+		: "g2", "g3", "g4", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h
new file mode 100644
index 000000000000..e708e6b50d2b
--- /dev/null
+++ b/include/asm-sparc/clock.h
@@ -0,0 +1,11 @@
+/* $Id: clock.h,v 1.3 1995/11/25 02:31:25 davem Exp $
+ * clock.h:  Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h
new file mode 100644
index 000000000000..0e05afe02d44
--- /dev/null
+++ b/include/asm-sparc/contregs.h
@@ -0,0 +1,54 @@
+/* $Id: contregs.h,v 1.8 2000/12/28 22:49:11 davem Exp $ */
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h
new file mode 100644
index 000000000000..ec0d9ef90a3b
--- /dev/null
+++ b/include/asm-sparc/cpudata.h
@@ -0,0 +1,26 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+	unsigned long udelay_val;
+	unsigned long clock_tick;
+	unsigned int multiplier;
+	unsigned int counter;
+	int prom_node;
+	int mid;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/include/asm-sparc/cputime.h b/include/asm-sparc/cputime.h
new file mode 100644
index 000000000000..1a642b81e019
--- /dev/null
+++ b/include/asm-sparc/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h
new file mode 100644
index 000000000000..8fe7c82a5e21
--- /dev/null
+++ b/include/asm-sparc/current.h
@@ -0,0 +1,31 @@
+/*
+ *  include/asm-sparc/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+/*
+ * At the sparc64 DaveM keeps current_thread_info in %g4.
+ * We might want to consider doing the same to shave a few cycles.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+/* Two stage process (inline + #define) for type-checking. */
+/* We also obfuscate get_current() to check if anyone used that by mistake. */
+static inline struct task_struct *__get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current __get_current()
+
+#endif /* !(_ASM_CURRENT_H) */
diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h
new file mode 100644
index 000000000000..fc92fc839c3f
--- /dev/null
+++ b/include/asm-sparc/cypress.h
@@ -0,0 +1,79 @@
+/* $Id: cypress.h,v 1.6 1996/08/29 09:48:09 davem Exp $
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ *      CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ *    the MMU is off.  0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ *     MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ *     through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ *     0=not-locked 1=locked  (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA       0x00c00000
+#define CYPRESS_MCM       0x00300000
+#define CYPRESS_MVALID    0x00080000
+#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
+#define CYPRESS_BMODE     0x00004000
+#define CYPRESS_ACENABLE  0x00002000
+#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
+#define CYPRESS_CMODE     0x00000400
+#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
+#define CYPRESS_CENABLE   0x00000100
+#define CYPRESS_NFAULT    0x00000002
+#define CYPRESS_MENABLE   0x00000001
+
+extern __inline__ void cypress_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+extern __inline__ void cypress_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+extern __inline__ void cypress_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+extern __inline__ void cypress_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
new file mode 100644
index 000000000000..6edf2cbb246b
--- /dev/null
+++ b/include/asm-sparc/delay.h
@@ -0,0 +1,35 @@
+/* $Id: delay.h,v 1.11 2001/01/01 01:46:15 davem Exp $
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <linux/config.h>
+#include <asm/cpudata.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+	__asm__ __volatile__("cmp %0, 0\n\t"
+			     "1: bne 1b\n\t"
+			     "subcc %0, 1, %0\n" :
+			     "=&r" (loops) :
+			     "0" (loops) :
+			     "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val	cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val	loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs)	__udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs)	__ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/include/asm-sparc/div64.h b/include/asm-sparc/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-sparc/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
new file mode 100644
index 000000000000..2dc5bb8effa6
--- /dev/null
+++ b/include/asm-sparc/dma-mapping.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, int flag)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
new file mode 100644
index 000000000000..07e6368a2521
--- /dev/null
+++ b/include/asm-sparc/dma.h
@@ -0,0 +1,290 @@
+/* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $
+ * include/asm-sparc/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	unsigned long addr;      /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs,
+				       unsigned long bit)
+{
+	int ctr = 50000;   /* Let's find some bugs ;) */
+
+	/* Busy wait until the bit is not set any more */
+	while((regs->cond_reg&bit) && (ctr>0)) {
+		ctr--;
+		__delay(5);
+	}
+
+	/* Check for bogus outcome. */
+	if(!ctr)
+		panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+	struct sparc_dma_registers *regs = dma->regs;                      \
+	/* Let the current FIFO drain itself */                            \
+	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+	/* Reset the logic */                                              \
+	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+	__delay(400);                         /* let the bits set ;) */    \
+	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+	/* Enable FAST transfers if available */                           \
+	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+	dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
new file mode 100644
index 000000000000..2d6a997c5b0c
--- /dev/null
+++ b/include/asm-sparc/ebus.h
@@ -0,0 +1,98 @@
+/* $Id: ebus.h,v 1.2 1999/09/11 23:05:55 zaitcev Exp $
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) 
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <asm/oplib.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus {
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct linux_pbm_info		*parent;
+	struct pci_dev			*self;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct linux_prom_ebus_ranges	 ebus_ranges[PROMREG_MAX];
+	int				 num_ebus_ranges;
+};
+
+struct linux_ebus_dma {
+	unsigned int dcsr;
+	unsigned int dacr;
+	unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND	0x00000001
+#define EBUS_DCSR_ERR_PEND	0x00000002
+#define EBUS_DCSR_DRAIN		0x00000004
+#define EBUS_DCSR_INT_EN	0x00000010
+#define EBUS_DCSR_RESET		0x00000080
+#define EBUS_DCSR_WRITE		0x00000100
+#define EBUS_DCSR_EN_DMA	0x00000200
+#define EBUS_DCSR_CYC_PEND	0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
+#define EBUS_DCSR_EN_CNT	0x00002000
+#define EBUS_DCSR_TC		0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
+#define EBUS_DCSR_BURST_SZ_1	0x00080000
+#define EBUS_DCSR_BURST_SZ_4	0x00000000
+#define EBUS_DCSR_BURST_SZ_8	0x00040000
+#define EBUS_DCSR_BURST_SZ_16	0x000c0000
+#define EBUS_DCSR_DIAG_EN	0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
+#define EBUS_DCSR_TCI_DIS	0x00800000
+#define EBUS_DCSR_EN_NEXT	0x01000000
+#define EBUS_DCSR_DMA_ON	0x02000000
+#define EBUS_DCSR_A_LOADED	0x04000000
+#define EBUS_DCSR_NA_LOADED	0x08000000
+#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h
new file mode 100644
index 000000000000..8e27ceccb76d
--- /dev/null
+++ b/include/asm-sparc/ecc.h
@@ -0,0 +1,122 @@
+/* $Id: ecc.h,v 1.3 1996/04/25 06:12:57 davem Exp $
+ * ecc.h: Definitions and defines for the external cache/memory
+ *        controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE     0x00000000       /* ECC enable register */
+#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
+#define ECC_FADDR      0x00000010       /* ECC fault address register */
+#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
+#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
+#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * |              |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ *  31           5   4   3    2    1    0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS     0x00000010
+#define ECC_MBAE_MOD3     0x00000008
+#define ECC_MBAE_MOD2     0x00000004
+#define ECC_MBAE_MOD1     0x00000002 
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * |    RESV   | ECHECK | EINT |
+ * -----------------------------
+ *  31        2     1       0
+ *
+ * ECHECK:  Enable ECC checking.  0=off 1=on
+ * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
+ */ 
+#define ECC_FCR_CHECK    0x00000002
+#define ECC_FCR_INTENAB  0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ *     superset bits in the virtual cache and can be used for
+ *     a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
+ *     mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ *     1=yes.  This means either an 'ldstub' or 'swap' instruction
+ *     was in progress (but not finished) when this fault happened.
+ *     This indicated whether the bus was locked when the fault
+ *     occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ *    0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK   0xf0000000
+#define ECC_FADDR0_S         0x08000000
+#define ECC_FADDR0_VADDR     0x003fc000
+#define ECC_FADDR0_BMODE     0x00002000
+#define ECC_FADDR0_ATOMIC    0x00001000
+#define ECC_FADDR0_CACHE     0x00000800
+#define ECC_FADDR0_SIZE      0x00000700
+#define ECC_FADDR0_TYPE      0x000000f0
+#define ECC_FADDR0_PADDR     0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * |          Physical Address 31-0    |
+ * -------------------------------------
+ *  31                               0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ *  31-18  17  16    15-8    7-4   3    2    1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error.  0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR    0x00020000
+#define ECC_FSR_MULT     0x00010000
+#define ECC_FSR_SYND     0x0000ff00
+#define ECC_FSR_DWORD    0x000000f0
+#define ECC_FSR_UNC      0x00000008
+#define ECC_FSR_TIMEO    0x00000004
+#define ECC_FSR_BADSLOT  0x00000002
+#define ECC_FSR_C        0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h
new file mode 100644
index 000000000000..a8ff7496ddf5
--- /dev/null
+++ b/include/asm-sparc/eeprom.h
@@ -0,0 +1,9 @@
+/* $Id: eeprom.h,v 1.3 1995/11/25 02:31:38 davem Exp $
+ * eeprom.h:  Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas.  The IDPROM lives here too.
+ */
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
new file mode 100644
index 000000000000..4a71d7c1eace
--- /dev/null
+++ b/include/asm-sparc/elf.h
@@ -0,0 +1,173 @@
+/* $Id: elf.h,v 1.22 2000/07/12 01:27:08 davem Exp $ */
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+#include <asm/mbus.h>
+#include <asm/uaccess.h>
+#endif
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+
+/* For the most part we present code dumps in the format
+ * Solaris does.
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Format is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+#define ELF_CORE_COPY_REGS(__elf_regs, __pt_regs)	\
+do {	unsigned long *dest = &(__elf_regs[0]);		\
+	struct pt_regs *src = (__pt_regs);		\
+	unsigned long __user *sp;			\
+	memcpy(&dest[0], &src->u_regs[0],		\
+	       sizeof(unsigned long) * 16);		\
+	/* Don't try this at home kids... */		\
+	sp = (unsigned long __user *) src->u_regs[14];	\
+	copy_from_user(&dest[16], sp,			\
+		       sizeof(unsigned long) * 16);	\
+	dest[32] = src->psr;				\
+	dest[33] = src->pc;				\
+	dest[34] = src->npc;				\
+	dest[35] = src->y;				\
+	dest[36] = dest[37] = 0; /* XXX */		\
+} while(0); /* Janitors: Don't touch this colon. */
+
+typedef struct {
+	union {
+		unsigned long	pr_regs[32];
+		double		pr_dregs[16];
+	} pr_fr;
+	unsigned long __unused;
+	unsigned long	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} elf_fpregset_t;
+
+#define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs)	\
+	({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread.kregs); 1; })
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_SPARC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE	4096
+#else
+#define ELF_EXEC_PAGESIZE	8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This can NOT be done in userspace
+   on Sparc.  */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+			  HWCAP_SPARC_SWAP | \
+			  ((srmmu_modtype != Cypress && \
+			    srmmu_modtype != Cypress_vE && \
+			    srmmu_modtype != Cypress_vD) ? \
+			   HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM	(NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h
new file mode 100644
index 000000000000..8c01c5f3b06d
--- /dev/null
+++ b/include/asm-sparc/errno.h
@@ -0,0 +1,110 @@
+/* $Id: errno.h,v 1.6 1997/04/15 09:03:38 davem Exp $ */
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Net dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	ENOSTR		72	/* Device not a stream */
+#define	ETIME		73	/* Timer expired */
+#define	ENOSR		74	/* Out of streams resources */
+#define	ENOMSG		75	/* No message of desired type */
+#define	EBADMSG		76	/* Not a data message */
+#define	EIDRM		77	/* Identifier removed */
+#define	EDEADLK		78	/* Resource deadlock would occur */
+#define	ENOLCK		79	/* No record locks available */
+#define	ENONET		80	/* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define	ENOLINK		82	/* Link has been severed */
+#define	EADV		83	/* Advertise error */
+#define	ESRMNT		84	/* Srmount error */
+#define	ECOMM		85      /* Communication error on send */
+#define	EPROTO		86	/* Protocol error */
+#define	EMULTIHOP	87	/* Multihop attempted */
+#define	EDOTDOT		88	/* RFS specific error */
+#define	EREMCHG		89	/* Remote address changed */
+#define	ENOSYS		90	/* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define	ESTRPIPE	91	/* Streams pipe error */
+#define	EOVERFLOW	92	/* Value too large for defined data type */
+#define	EBADFD		93	/* File descriptor in bad state */
+#define	ECHRNG		94	/* Channel number out of range */
+#define	EL2NSYNC	95	/* Level 2 not synchronized */
+#define	EL3HLT		96	/* Level 3 halted */
+#define	EL3RST		97	/* Level 3 reset */
+#define	ELNRNG		98	/* Link number out of range */
+#define	EUNATCH		99	/* Protocol driver not attached */
+#define	ENOCSI		100	/* No CSI structure available */
+#define	EL2HLT		101	/* Level 2 halted */
+#define	EBADE		102	/* Invalid exchange */
+#define	EBADR		103	/* Invalid request descriptor */
+#define	EXFULL		104	/* Exchange full */
+#define	ENOANO		105	/* No anode */
+#define	EBADRQC		106	/* Invalid request code */
+#define	EBADSLT		107	/* Invalid slot */
+#define	EDEADLOCK	108	/* File locking deadlock error */
+#define	EBFONT		109	/* Bad font file format */
+#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
+#define	ENODATA		111	/* No data available */
+#define	ELIBBAD		112	/* Accessing a corrupted shared library */
+#define	ENOPKG		113	/* Package not installed */
+#define	ELIBACC		114	/* Can not access a needed shared library */
+#define	ENOTUNIQ	115	/* Name not unique on network */
+#define	ERESTART	116	/* Interrupted syscall should be restarted */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EILSEQ		122	/* Illegal byte sequence */
+#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+
+#define	ENOMEDIUM	125	/* No medium found */
+#define	EMEDIUMTYPE	126	/* Wrong medium type */
+#define	ECANCELED	127	/* Operation Cancelled */
+#define	ENOKEY		128	/* Required key not available */
+#define	EKEYEXPIRED	129	/* Key has expired */
+#define	EKEYREVOKED	130	/* Key has been revoked */
+#define	EKEYREJECTED	131	/* Key was rejected by service */
+
+#endif
diff --git a/include/asm-sparc/fbio.h b/include/asm-sparc/fbio.h
new file mode 100644
index 000000000000..c2b27e7a7cad
--- /dev/null
+++ b/include/asm-sparc/fbio.h
@@ -0,0 +1,297 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char *image;            /* cursor image bits */
+        char *mask;             /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h
new file mode 100644
index 000000000000..df9c75d41d68
--- /dev/null
+++ b/include/asm-sparc/fcntl.h
@@ -0,0 +1,89 @@
+/* $Id: fcntl.h,v 1.16 2001/09/20 00:35:33 davem Exp $ */
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_RDONLY	0x0000
+#define O_WRONLY	0x0001
+#define O_RDWR		0x0002
+#define O_ACCMODE	0x0003
+#define O_APPEND	0x0008
+#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
+#define O_CREAT		0x0200	/* not fcntl */
+#define O_TRUNC		0x0400	/* not fcntl */
+#define O_EXCL		0x0800	/* not fcntl */
+#define O_SYNC		0x2000
+#define O_NONBLOCK	0x4000
+#define O_NDELAY	(0x0004 | O_NONBLOCK)
+#define O_NOCTTY	0x8000	/* not fcntl */
+#define O_DIRECTORY	0x10000	/* must be a directory */
+#define O_NOFOLLOW	0x20000	/* don't follow links */
+#define O_LARGEFILE	0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME	0x200000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETOWN	5	/*  for sockets. */
+#define F_SETOWN	6	/*  for sockets. */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		3
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+	short __unused;
+};
+
+struct flock64 {
+	short l_type;
+	short l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t l_pid;
+	short __unused;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif
diff --git a/include/asm-sparc/fixmap.h b/include/asm-sparc/fixmap.h
new file mode 100644
index 000000000000..9de52b4d2cfb
--- /dev/null
+++ b/include/asm-sparc/fixmap.h
@@ -0,0 +1,111 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP	(0xfcfff000UL)
+#define FIXADDR_SIZE	((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
new file mode 100644
index 000000000000..780ee7ff9dc3
--- /dev/null
+++ b/include/asm-sparc/floppy.h
@@ -0,0 +1,369 @@
+/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef check_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define check_region(X, Y)	(0)
+#define request_region(X, Y, Z)	(1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+	volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+	unsigned char (*fd_inb)(int port);
+	void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+#define FLOPPY_MOTOR_MASK         0x10
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun_82072_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82072 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82072;
+	case 7: /* FD_DIR */
+		return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0;
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Oh geese, 82072 on the Sun has no DOR register,
+		 * the functionality is implemented via the AUXIO
+		 * I/O register.  So we must emulate the behavior.
+		 *
+		 * ASSUMPTIONS:  There will only ever be one floppy
+		 *               drive attached to a Sun controller
+		 *               and it will be at drive zero.
+		 */
+		{
+			unsigned bits = 0;
+			if (value & 0x10) bits |= AUXIO_FLPY_DSEL;
+			if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT;
+			set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+		}
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82072 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82072 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82072 = value;
+		break;
+	};
+	return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82077 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82077;
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sun_fdc->dir_82077;
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sun_fdc->dor_82077 = value;
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82077 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82077 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82077 = value;
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static __inline__ void virtual_dma_init(void)
+{
+	/* nothing... */
+}
+
+static __inline__ void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = 0;
+	}
+}
+
+static __inline__ void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static __inline__ void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static __inline__ void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static __inline__ void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy");
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+	char state[128];
+	int tnode, fd_node, num_regs;
+	struct resource r;
+
+	use_virtual_dma = 1;
+	
+	FLOPPY_IRQ = 11;
+	/* Forget it if we aren't on a machine that could possibly
+	 * ever have a floppy drive.
+	 */
+	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+		/* We certainly don't have a floppy controller. */
+		goto no_sun_fdc;
+	}
+	/* Well, try to find one. */
+	tnode = prom_getchild(prom_root_node);
+	fd_node = prom_searchsiblings(tnode, "obio");
+	if(fd_node != 0) {
+		tnode = prom_getchild(fd_node);
+		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+	} else {
+		fd_node = prom_searchsiblings(tnode, "fd");
+	}
+	if(fd_node == 0) {
+		goto no_sun_fdc;
+	}
+
+	/* The sun4m lets us know if the controller is actually usable. */
+	if(sparc_cpu_model == sun4m &&
+	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+		if(!strcmp(state, "disabled")) {
+			goto no_sun_fdc;
+		}
+	}
+	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+	num_regs = (num_regs / sizeof(fd_regs[0]));
+	prom_apply_obio_ranges(fd_regs, num_regs);
+	memset(&r, 0, sizeof(r));
+	r.flags = fd_regs[0].which_io;
+	r.start = fd_regs[0].phys_addr;
+	sun_fdc = (struct sun_flpy_controller *)
+	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+	/* Last minute sanity check... */
+	if(sun_fdc->status_82072 == 0xff) {
+		sun_fdc = NULL;
+		goto no_sun_fdc;
+	}
+
+        if(sparc_cpu_model == sun4c) {
+                sun_fdops.fd_inb = sun_82072_fd_inb;
+                sun_fdops.fd_outb = sun_82072_fd_outb;
+                fdc_status = &sun_fdc->status_82072;
+                /* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */
+        } else {
+                sun_fdops.fd_inb = sun_82077_fd_inb;
+                sun_fdops.fd_outb = sun_82077_fd_outb;
+                fdc_status = &sun_fdc->status_82077;
+                /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */
+	}
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	return (int) sun_fdc;
+
+no_sun_fdc:
+	return -1;
+}
+
+static int sparc_eject(void)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h
new file mode 100644
index 000000000000..2a668c479f68
--- /dev/null
+++ b/include/asm-sparc/hardirq.h
@@ -0,0 +1,24 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/include/asm-sparc/hdreg.h b/include/asm-sparc/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-sparc/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
new file mode 100644
index 000000000000..1a03c28da92d
--- /dev/null
+++ b/include/asm-sparc/head.h
@@ -0,0 +1,125 @@
+/* $Id: head.h,v 1.39 2000/05/26 22:18:45 ecd Exp $ */
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ     (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
+#define INTS_ENAB        0x01           /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+	rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick.  We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point.  The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b linux_sparc_syscall; \
+        rd %psr, %l0;
+
+/* Software trap for SunOS4.1.x system calls. */
+#define SUNOS_SYSCALL_TRAP \
+        rd %psr, %l0; \
+        sethi %hi(sunos_sys_table), %l7; \
+        b linux_sparc_syscall; \
+        or %l7, %lo(sunos_sys_table), %l7;
+
+#define SUNOS_NO_SYSCALL_TRAP \
+        b sunos_syscall; \
+        rd %psr, %l0; \
+        nop; \
+        nop;
+
+/* Software trap for Slowaris system calls. */
+#define SOLARIS_SYSCALL_TRAP \
+        b solaris_syscall; \
+        rd %psr, %l0; \
+        nop; \
+        nop;
+
+#define INDIRECT_SOLARIS_SYSCALL(x) \
+	mov x, %g1; \
+	b solaris_syscall; \
+	rd %psr, %l0; \
+	nop;
+
+#define BREAKPOINT_TRAP \
+	b breakpoint_trap; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+
+/* Software trap for Sparc-netbsd system calls. */
+#define NETBSD_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b bsd_syscall; \
+        rd %psr, %l0;
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+        b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+        b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/include/asm-sparc/highmem.h b/include/asm-sparc/highmem.h
new file mode 100644
index 000000000000..3de42e776274
--- /dev/null
+++ b/include/asm-sparc/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.  Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-sparc/hw_irq.h b/include/asm-sparc/hw_irq.h
new file mode 100644
index 000000000000..8d30a7694be2
--- /dev/null
+++ b/include/asm-sparc/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
new file mode 100644
index 000000000000..64d810385ea4
--- /dev/null
+++ b/include/asm-sparc/ide.h
@@ -0,0 +1,100 @@
+/* $Id: ide.h,v 1.7 2002/01/16 20:58:40 davem Exp $
+ * ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/psr.h>
+
+#undef  MAX_HWIFS
+#define MAX_HWIFS	2
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static __inline__ void __ide_insw(unsigned long port,
+				  void *dst,
+				  unsigned long count)
+{
+	volatile unsigned short *data_port;
+	/* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */
+	u16 *ps = dst;
+	u32 *pi;
+
+	data_port = (volatile unsigned short *)port;
+
+	if(((unsigned long)ps) & 0x2) {
+		*ps++ = *data_port;
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = (*data_port) << 16;
+		w |= (*data_port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = *data_port;
+
+	/* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
+}
+
+static __inline__ void __ide_outsw(unsigned long port,
+				   const void *src,
+				   unsigned long count)
+{
+	volatile unsigned short *data_port;
+	/* unsigned long end = (unsigned long)src + (count << 1); */
+	const u16 *ps = src;
+	const u32 *pi;
+
+	data_port = (volatile unsigned short *)port;
+
+	if(((unsigned long)src) & 0x2) {
+		*data_port = *ps++;
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		*data_port = (w >> 16);
+		*data_port = w;
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		*data_port = *ps;
+
+	/* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h
new file mode 100644
index 000000000000..d856e640acd3
--- /dev/null
+++ b/include/asm-sparc/idprom.h
@@ -0,0 +1,33 @@
+/* $Id: idprom.h,v 1.6 1996/08/04 10:35:07 ecd Exp $
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+/* Offset into the EEPROM where the id PROM is located on the 4c */
+#define IDPROM_OFFSET  0x7d8
+
+/* On sun4m; physical. */
+/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
+#define IDPROM_OFFSET_M  0xfd8
+
+struct idprom
+{
+	unsigned char	id_format;	/* Format identifier (always 0x01) */
+	unsigned char	id_machtype;	/* Machine type */
+	unsigned char	id_ethaddr[6];	/* Hardware ethernet address */
+	long		id_date;	/* Date of manufacture */
+	unsigned int	id_sernum:24;	/* Unique serial number */
+	unsigned char	id_cksum;	/* Checksum - xor of the data bytes */
+	unsigned char	reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#define IDPROM_SIZE  (sizeof(struct idprom))
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/include/asm-sparc/io-unit.h b/include/asm-sparc/io-unit.h
new file mode 100644
index 000000000000..96823b47fd45
--- /dev/null
+++ b/include/asm-sparc/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU.  The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+ 
+/* AIEEE, unlike the nice sun4m, these monsters have 
+   fixed DMA range 64M */
+ 
+#define IOUNIT_DMA_BASE	    0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE	    0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])	*/
+#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)		*/
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote.  There may be
+ * XXX some horrible hwbugs though, so be careful.  -DaveM
+ */
+#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache	*/
+#define IOUPTE_INTRA	     0x00000008 /* SBUS direct slot->slot transfer	*/
+#define IOUPTE_WRITE         0x00000004 /* Writeable				*/
+#define IOUPTE_VALID         0x00000002 /* IOPTE is valid			*/
+#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA	*/
+
+struct iounit_struct {
+	unsigned long		bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+	spinlock_t		lock;
+	iopte_t			*page_table;
+	unsigned long		rotor[3];
+	unsigned long		limit[4];
+};
+
+#define IOUNIT_BMAP1_START	0x00000000
+#define IOUNIT_BMAP1_END	(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START	IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END	IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
new file mode 100644
index 000000000000..a42df208d590
--- /dev/null
+++ b/include/asm-sparc/io.h
@@ -0,0 +1,290 @@
+/*
+ * $Id: io.h,v 1.30 2001/12/21 01:23:21 davem Exp $
+ */
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>  /* struct resource */
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+	return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+	return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+	return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+	return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr)		__readb(__addr)
+#define readw(__addr)		__readw(__addr)
+#define readl(__addr)		__readl(__addr)
+#define readb_relaxed(__addr)	readb(__addr)
+#define readw_relaxed(__addr)	readw(__addr)
+#define readl_relaxed(__addr)	readl(__addr)
+
+#define writeb(__b, __addr)	__writeb((__b),(__addr))
+#define writew(__w, __addr)	__writew((__w),(__addr))
+#define writel(__l, __addr)	__writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr)	__readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr)		__readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr)		__readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr)		__readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr)	__writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr)	__writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr)		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, __dst);
+		__dst++;
+	}
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void 
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y)	ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+    unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x)   (rtc_port + (x))
+#define RTC_ALWAYS_BCD  0
+
+/* Nothing to do */
+/* P3: Only IDE DMA may need these. XXX Verify that it still does... */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h
new file mode 100644
index 000000000000..e6fc4de19940
--- /dev/null
+++ b/include/asm-sparc/ioctl.h
@@ -0,0 +1,68 @@
+/* $Id: ioctl.h,v 1.6 1999/12/01 23:58:36 davem Exp $ */
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h
new file mode 100644
index 000000000000..bdf77b0dfd8e
--- /dev/null
+++ b/include/asm-sparc/ioctls.h
@@ -0,0 +1,134 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TCGETS		_IOR('T', 8, struct termios)
+#define TCSETS		_IOW('T', 9, struct termios)
+#define TCSETSW		_IOW('T', 10, struct termios)
+#define TCSETSF		_IOW('T', 11, struct termios)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * thing we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD	_IOR('t', 0, int)
+#define TIOCSETD	_IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL	_IO('t', 13)
+#define TIOCNXCL	_IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS	_IO('t', 36)
+#define __TIOCSSIZE     _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */
+#define __TIOCGSIZE     _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */
+#define TIOCGSOFTCAR	_IOR('t', 100, int)
+#define TIOCSSOFTCAR	_IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET	_IOR('t', 106, int)
+#define TIOCMBIC	_IOW('t', 107, int)
+#define TIOCMBIS	_IOW('t', 108, int)
+#define TIOCMSET	_IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT		_IOW('t', 112, int)
+#define TIOCNOTTY	_IO('t', 113)
+#define TIOCSTI		_IOW('t', 114, char)
+#define TIOCOUTQ	_IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP	_IOW('t', 130, int)
+#define TIOCGPGRP	_IOR('t', 131, int)
+#define TIOCSCTTY	_IO('t', 132)
+#define TIOCGSID	_IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX	0x541C
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TCSBRKP		0x5425
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT	0x545C /* Wait input */
+#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
new file mode 100644
index 000000000000..8171362d56b9
--- /dev/null
+++ b/include/asm-sparc/iommu.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU.  The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+	/* First page */
+	volatile unsigned long control;    /* IOMMU control */
+	volatile unsigned long base;       /* Physical base of iopte page table */
+	volatile unsigned long _unused1[3];
+	volatile unsigned long tlbflush;   /* write only */
+	volatile unsigned long pageflush;  /* write only */
+	volatile unsigned long _unused2[1017];
+	/* Second page */
+	volatile unsigned long afsr;       /* Async-fault status register */
+	volatile unsigned long afar;       /* Async-fault physical address */
+	volatile unsigned long _unused3[2];
+	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
+	volatile unsigned long sbuscfg1;
+	volatile unsigned long sbuscfg2;
+	volatile unsigned long sbuscfg3;
+	volatile unsigned long mfsr;       /* Memory-fault status register */
+	volatile unsigned long mfar;       /* Memory-fault physical address */
+	volatile unsigned long _unused4[1014];
+	/* Third page */
+	volatile unsigned long mid;        /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
+					  produced by this device as pure
+					  physical. */
+
+#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
+					  on the even word of the access, low bit
+					  indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE         0x00000004 /* Writeable */
+#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ           0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+	struct iommu_regs *regs;
+	iopte_t *page_table;
+	/* For convenience */
+	unsigned long start; /* First managed virtual address */
+	unsigned long end;   /* Last managed virtual address */
+
+	struct bit_map usemap;
+};
+
+extern __inline__ void iommu_invalidate(struct iommu_regs *regs)
+{
+	regs->tlbflush = 0;
+}
+
+extern __inline__ void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+	regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc/ipc.h b/include/asm-sparc/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-sparc/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h
new file mode 100644
index 000000000000..9bef02d04e4b
--- /dev/null
+++ b/include/asm-sparc/ipcbuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/* 
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *				    sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	unsigned short		__pad1;
+	__kernel_mode_t		mode;
+	unsigned short		__pad2;
+	unsigned short		seq;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
new file mode 100644
index 000000000000..cee356b0dae3
--- /dev/null
+++ b/include/asm-sparc/irq.h
@@ -0,0 +1,191 @@
+/* $Id: irq.h,v 1.32 2000/08/26 02:42:28 anton Exp $
+ * irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>     /* For NR_CPUS */
+#include <linux/interrupt.h>
+
+#include <asm/system.h>     /* For SUN4M_NCPUS */
+#include <asm/btfixup.h>
+
+#define __irq_ino(irq) irq
+#define __irq_pil(irq) irq
+BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
+#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)	(irq)
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * changed these to function pointers.. it saves cycles and will allow
+ * the irq dependencies to be split into different files at a later date
+ * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.
+ * Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Changed these to btfixup entities... It saves cycles :)
+ */
+BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, clear_clock_irq, void)
+BTFIXUPDEF_CALL(void, clear_profile_irq, int)
+BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
+
+static inline void disable_irq_nosync(unsigned int irq)
+{
+	BTFIXUP_CALL(disable_irq)(irq);
+}
+
+static inline void disable_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(disable_irq)(irq);
+}
+
+static inline void enable_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(enable_irq)(irq);
+}
+
+static inline void disable_pil_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(disable_pil_irq)(irq);
+}
+
+static inline void enable_pil_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(enable_pil_irq)(irq);
+}
+
+static inline void clear_clock_irq(void)
+{
+	BTFIXUP_CALL(clear_clock_irq)();
+}
+
+static inline void clear_profile_irq(int irq)
+{
+	BTFIXUP_CALL(clear_profile_irq)(irq);
+}
+
+static inline void load_profile_irq(int cpu, int limit)
+{
+	BTFIXUP_CALL(load_profile_irq)(cpu, limit);
+}
+
+extern void (*sparc_init_timers)(irqreturn_t (*lvl10_irq)(int, void *, struct pt_regs *));
+extern void claim_ticker14(irqreturn_t (*irq_handler)(int, void *, struct pt_regs *),
+			   int irq,
+			   unsigned int timeout);
+
+#ifdef CONFIG_SMP
+BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, set_irq_udt, int)
+
+#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
+#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
+#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
+#endif
+
+extern int request_fast_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, __const__ char *devname);
+
+/* On the sun4m, just like the timers, we have both per-cpu and master
+ * interrupt registers.
+ */
+
+/* These registers are used for sending/receiving irqs from/to
+ * different cpu's.
+ */
+struct sun4m_intreg_percpu {
+	unsigned int tbt;        /* Interrupts still pending for this cpu. */
+
+	/* These next two registers are WRITE-ONLY and are only
+	 * "on bit" sensitive, "off bits" written have NO affect.
+	 */
+	unsigned int clear;  /* Clear this cpus irqs here. */
+	unsigned int set;    /* Set this cpus irqs here. */
+	unsigned char space[PAGE_SIZE - 12];
+};
+
+/*
+ * djhr
+ * Actually the clear and set fields in this struct are misleading..
+ * according to the SLAVIO manual (and the same applies for the SEC)
+ * the clear field clears bits in the mask which will ENABLE that IRQ
+ * the set field sets bits in the mask to DISABLE the IRQ.
+ *
+ * Also the undirected_xx address in the SLAVIO is defined as
+ * RESERVED and write only..
+ *
+ * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
+ *             sun4m machines, for MP the layout makes more sense.
+ */
+struct sun4m_intregs {
+	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
+	unsigned int tbt;                /* IRQ's that are still pending. */
+	unsigned int irqs;               /* Master IRQ bits. */
+
+	/* Again, like the above, two these registers are WRITE-ONLY. */
+	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
+	unsigned int set;                /* Set master IRQ's by setting bits here. */
+
+	/* This register is both READ and WRITE. */
+	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+};
+
+extern struct sun4m_intregs *sun4m_interrupts;
+
+/* 
+ * Bit field defines for the interrupt registers on various
+ * Sparc machines.
+ */
+
+/* The sun4c interrupt register. */
+#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
+#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
+#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
+#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
+#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
+#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
+#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE  	0x80000000
+#define SUN4M_INT_E14     	0x00000080
+#define SUN4M_INT_E10     	0x00080000
+
+#define SUN4M_HARD_INT(x)	(0x000000001 << (x))
+#define SUN4M_SOFT_INT(x)	(0x000010000 << (x))
+
+#define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
+#define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
+#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
+#define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
+#define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
+#define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
+#define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
+#define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
+#define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
+#define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
+#define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
+#define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+
+#define SUN4M_INT_SBUS(x)	(1 << (x+7))
+#define SUN4M_INT_VME(x)	(1 << (x))
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
diff --git a/include/asm-sparc/jsflash.h b/include/asm-sparc/jsflash.h
new file mode 100644
index 000000000000..3457f29bd73b
--- /dev/null
+++ b/include/asm-sparc/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999  Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT   (('F'<<8)|54)
+struct jsflash_ident_arg {
+	__u64 off;                /* 0x20000000 is included */
+	__u32 size;
+	char name[32];		/* With trailing zero */
+};
+
+#define JSFLASH_ERASE   (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+	__u64 data;		/* char* for sparc and sparc64 */
+	__u64 off;
+	__u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/include/asm-sparc/kbio.h b/include/asm-sparc/kbio.h
new file mode 100644
index 000000000000..3cf496bdf399
--- /dev/null
+++ b/include/asm-sparc/kbio.h
@@ -0,0 +1,56 @@
+#ifndef __LINUX_KBIO_H
+#define __LINUX_KBIO_H
+
+/* Return keyboard type */
+#define KIOCTYPE    _IOR('k', 9, int)
+/* Return Keyboard layout */
+#define KIOCLAYOUT  _IOR('k', 20, int)
+
+enum {
+    TR_NONE,
+    TR_ASCII,			/* keyboard is in regular state */
+    TR_EVENT,			/* keystrokes sent as firm events */
+    TR_UNTRANS_EVENT		/* EVENT+up and down+no translation */
+};
+
+/* Return the current keyboard translation */
+#define KIOCGTRANS  _IOR('k', 5, int)
+/* Set the keyboard translation */
+#define KIOCTRANS   _IOW('k', 0, int)
+
+/* Send a keyboard command */
+#define KIOCCMD     _IOW('k', 8, int)
+
+/* Return if keystrokes are being sent to /dev/kbd */
+
+/* Set routing of keystrokes to /dev/kbd */
+#define KIOCSDIRECT _IOW('k', 10, int)
+
+/* Set keyboard leds */
+#define KIOCSLED    _IOW('k', 14, unsigned char)
+
+/* Get keyboard leds */
+#define KIOCGLED    _IOR('k', 15, unsigned char)
+
+/* Used by KIOC[GS]RATE */
+struct kbd_rate {
+	unsigned char delay;	/* Delay in Hz before first repeat.	*/
+	unsigned char rate;	/* In characters per second (0..50).	*/
+};
+
+/* Set keyboard rate */
+#define KIOCSRATE   _IOW('k', 40, struct kbd_rate)
+
+/* Get keyboard rate */
+#define KIOCGRATE   _IOW('k', 41, struct kbd_rate)
+
+/* Top bit records if the key is up or down */
+#define KBD_UP      0x80
+
+/* Usable information */
+#define KBD_KEYMASK 0x7f
+
+/* All keys up */
+#define KBD_IDLE    0x75
+
+#endif /* __LINUX_KBIO_H */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
new file mode 100644
index 000000000000..3ea4916635ee
--- /dev/null
+++ b/include/asm-sparc/kdebug.h
@@ -0,0 +1,69 @@
+/* $Id: kdebug.h,v 1.11 2000/06/04 06:23:53 anton Exp $
+ * kdebug.h:  Defines and definitions for debugging the Linux kernel
+ *            under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP     126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time.  It is a pointer to
+ * a structure in the debuggers address space.  Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+	/* First the entry point into the debugger.  You jump here
+	 * to give control over to the debugger.
+	 */
+	unsigned long kdebug_entry;
+	unsigned long kdebug_trapme;   /* Figure out later... */
+	/* The following is the number of pages that the debugger has
+	 * taken from to total pool.
+	 */
+	unsigned long *kdebug_stolen_pages;
+	/* Ok, after you remap yourself and/or change the trap table
+	 * from what you were left with at boot time you have to call
+	 * this synchronization function so the debugger can check out
+	 * what you have done.
+	 */
+	debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+extern __inline__ void sp_enter_debugger(void)
+{
+	__asm__ __volatile__("jmpl %0, %%o7\n\t"
+			     "nop\n\t" : :
+			     "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+	     if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+	       sp_enter_debugger(); \
+		       } while(0)
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF    0x0
+#define KDEBUG_DUNNO_OFF    0x4
+#define KDEBUG_DUNNO2_OFF   0x8
+#define KDEBUG_TEACH_OFF    0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/include/asm-sparc/kgdb.h b/include/asm-sparc/kgdb.h
new file mode 100644
index 000000000000..d120adfb429f
--- /dev/null
+++ b/include/asm-sparc/kgdb.h
@@ -0,0 +1,94 @@
+/* $Id: kgdb.h,v 1.8 1998/01/07 06:33:44 baccala Exp $
+ * kgdb.h: Defines and declarations for serial line source level
+ *         remote debugging of the Linux kernel using gdb.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifndef __ASSEMBLY__
+/* To init the kgdb engine. */
+extern void set_debug_traps(void);
+
+/* To enter the debugger explicitly. */
+extern void breakpoint(void);
+
+/* For convenience we define the format of a kgdb trap breakpoint
+ * frame here also.
+ */
+struct kgdb_frame {
+	unsigned long globals[8];
+	unsigned long outs[8];
+	unsigned long locals[8];
+	unsigned long ins[8];
+	unsigned long fpregs[32];
+	unsigned long y;
+	unsigned long psr;
+	unsigned long wim;
+	unsigned long tbr;
+	unsigned long pc;
+	unsigned long npc;
+	unsigned long fpsr;
+	unsigned long cpsr;
+};
+#endif /* !(__ASSEMBLY__) */
+
+/* Macros for assembly usage of the kgdb breakpoint frame. */
+#define KGDB_G0     0x000
+#define KGDB_G1     0x004
+#define KGDB_G2     0x008
+#define KGDB_G4     0x010
+#define KGDB_G6     0x018
+#define KGDB_I0     0x020
+#define KGDB_I2     0x028
+#define KGDB_I4     0x030
+#define KGDB_I6     0x038
+#define KGDB_Y      0x100
+#define KGDB_PSR    0x104
+#define KGDB_WIM    0x108
+#define KGDB_TBR    0x10c
+#define KGDB_PC     0x110
+#define KGDB_NPC    0x114
+
+#define SAVE_KGDB_GLOBALS(reg) \
+        std     %g0, [%reg + STACKFRAME_SZ + KGDB_G0]; \
+        std     %g2, [%reg + STACKFRAME_SZ + KGDB_G2]; \
+        std     %g4, [%reg + STACKFRAME_SZ + KGDB_G4]; \
+        std     %g6, [%reg + STACKFRAME_SZ + KGDB_G6];
+
+#define SAVE_KGDB_INS(reg) \
+        std     %i0, [%reg + STACKFRAME_SZ + KGDB_I0]; \
+        std     %i2, [%reg + STACKFRAME_SZ + KGDB_I2]; \
+        std     %i4, [%reg + STACKFRAME_SZ + KGDB_I4]; \
+        std     %i6, [%reg + STACKFRAME_SZ + KGDB_I6];
+
+#define SAVE_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \
+        st      %reg_y, [%reg + STACKFRAME_SZ + KGDB_Y]; \
+        st      %reg_psr, [%reg + STACKFRAME_SZ + KGDB_PSR]; \
+        st      %reg_wim, [%reg + STACKFRAME_SZ + KGDB_WIM]; \
+        st      %reg_tbr, [%reg + STACKFRAME_SZ + KGDB_TBR]; \
+        st      %reg_pc, [%reg + STACKFRAME_SZ + KGDB_PC]; \
+        st      %reg_npc, [%reg + STACKFRAME_SZ + KGDB_NPC];
+
+#define LOAD_KGDB_GLOBALS(reg) \
+        ld      [%reg + STACKFRAME_SZ + KGDB_G1], %g1; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_G2], %g2; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_G4], %g4; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_G6], %g6;
+
+#define LOAD_KGDB_INS(reg) \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_I0], %i0; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_I2], %i2; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_I4], %i4; \
+        ldd     [%reg + STACKFRAME_SZ + KGDB_I6], %i6;
+
+#define LOAD_KGDB_SREGS(reg, reg_y, reg_psr, reg_wim, reg_tbr, reg_pc, reg_npc) \
+	ld	[%reg + STACKFRAME_SZ + KGDB_Y], %reg_y; \
+	ld	[%reg + STACKFRAME_SZ + KGDB_PSR], %reg_psr; \
+	ld	[%reg + STACKFRAME_SZ + KGDB_WIM], %reg_wim; \
+	ld	[%reg + STACKFRAME_SZ + KGDB_TBR], %reg_tbr; \
+	ld	[%reg + STACKFRAME_SZ + KGDB_PC], %reg_pc; \
+	ld	[%reg + STACKFRAME_SZ + KGDB_NPC], %reg_npc;
+
+#endif /* !(_SPARC_KGDB_H) */
diff --git a/include/asm-sparc/kmap_types.h b/include/asm-sparc/kmap_types.h
new file mode 100644
index 000000000000..e215f7104974
--- /dev/null
+++ b/include/asm-sparc/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-sparc/linkage.h b/include/asm-sparc/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-sparc/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-sparc/local.h b/include/asm-sparc/local.h
new file mode 100644
index 000000000000..bc80815a435c
--- /dev/null
+++ b/include/asm-sparc/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h
new file mode 100644
index 000000000000..d831350f5428
--- /dev/null
+++ b/include/asm-sparc/machines.h
@@ -0,0 +1,69 @@
+/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+	char *name;
+	unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES   15
+
+extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN4       0x20
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h
new file mode 100644
index 000000000000..5f2749015342
--- /dev/null
+++ b/include/asm-sparc/mbus.h
@@ -0,0 +1,102 @@
+/* $Id: mbus.h,v 1.9 1997/06/24 15:48:12 jj Exp $
+ * mbus.h:  Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h>    /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h>  /* Ugh, bug city... */
+
+enum mbus_module {
+	HyperSparc        = 0,
+	Cypress           = 1,
+	Cypress_vE        = 2,
+	Cypress_vD        = 3,
+	Swift_ok          = 4,
+	Swift_bad_c       = 5,
+	Swift_lots_o_bugs = 6,
+	Tsunami           = 7,
+	Viking_12         = 8,
+	Viking_2x         = 9,
+	Viking_30         = 10,
+	Viking_35         = 11,
+	Viking_new        = 12,
+	TurboSparc	  = 13,
+	SRMMU_INVAL_MOD   = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN        0x00000001
+#define HWBUG_ASIFLUSH_BROKEN        0x00000002
+#define HWBUG_VACFLUSH_BITROT        0x00000004
+#define HWBUG_KERN_ACCBROKEN         0x00000008
+#define HWBUG_KERN_CBITBROKEN        0x00000010
+#define HWBUG_MODIFIED_BITROT        0x00000020
+#define HWBUG_PC_BADFAULT_ADDR       0x00000040
+#define HWBUG_SUPERSCALAR_BAD        0x00000080
+#define HWBUG_PACINIT_BITROT         0x00000100
+
+extern unsigned int hwbug_bitmask;
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
+#define MBUS_LSI           0x3   /* LSI Logics */
+#define MBUS_ROSS          0x1   /* Ross is nice */
+#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
+#define ROSS_604_REV_F          0x1   /* revision f */
+#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B          0xe   /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30           0x3   /* Version 3.0 */
+#define VIKING_REV_35           0x4   /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815		0x0
+
+/* Fujitsu */
+#define FMI_AURORA		0x4   /* MB8690x, a Swift module... */
+#define FMI_TURBO		0x5   /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT            20
+
+extern __inline__ int get_cpuid(void)
+{
+	register int retval;
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (TBR_ID_SHIFT));
+	return (retval & 3);
+}
+
+extern __inline__ int get_modid(void)
+{
+	return (get_cpuid() | 0x8);
+}
+
+	
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h
new file mode 100644
index 000000000000..fa7eac926582
--- /dev/null
+++ b/include/asm-sparc/mc146818rtc.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h
new file mode 100644
index 000000000000..c0498d3baf93
--- /dev/null
+++ b/include/asm-sparc/memreg.h
@@ -0,0 +1,52 @@
+/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h:  Definitions of the values found in the synchronous
+ *            and asynchronous memory error registers when a fault
+ *            occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
+#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED  \
+        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long *sun4c_memerr_reg;
+#endif
+
+#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
+#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
+#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
+#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
+#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
+#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
+#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
+#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
+#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h
new file mode 100644
index 000000000000..138eb81dd70d
--- /dev/null
+++ b/include/asm-sparc/mman.h
@@ -0,0 +1,62 @@
+/* $Id: mman.h,v 1.9 2000/03/15 02:44:23 davem Exp $ */
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+/* SunOS'ified... */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system
+ * XXX calls.
+ */
+
+/* SunOS sys_mctl() stuff... */
+#define MC_SYNC         1  /* Sync pages in memory with storage (usu. a file) */
+#define MC_LOCK         2  /* Lock pages into core ram, do not allow swapping of them */
+#define MC_UNLOCK       3  /* Unlock pages locked via previous mctl() with MC_LOCK arg */
+#define MC_LOCKAS       5  /* Lock an entire address space of the calling process */
+#define MC_UNLOCKAS     6  /* Unlock entire address space of calling process */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+#define MADV_FREE	0x5		/* (Solaris) contents can be freed */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/include/asm-sparc/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h
new file mode 100644
index 000000000000..ed1e01d04d21
--- /dev/null
+++ b/include/asm-sparc/mmu_context.h
@@ -0,0 +1,40 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h
new file mode 100644
index 000000000000..cbd9e67b0c0b
--- /dev/null
+++ b/include/asm-sparc/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
new file mode 100644
index 000000000000..59b86bc793bf
--- /dev/null
+++ b/include/asm-sparc/mostek.h
@@ -0,0 +1,174 @@
+/* $Id: mostek.h,v 1.13 2001/01/11 15:07:09 davem Exp $
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <linux/config.h>
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr)		readb(_addr)
+#define mostek_write(_addr,_val)	writeb(_val, _addr)
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+struct mostek48t02 {
+	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
+	struct idprom idprom;		/* The idprom lives here. */
+	volatile unsigned char creg;	/* Control register */
+	volatile unsigned char sec;	/* Seconds (0-59) */
+	volatile unsigned char min;	/* Minutes (0-59) */
+	volatile unsigned char hour;	/* Hour (0-23) */
+	volatile unsigned char dow;	/* Day of the week (1-7) */
+	volatile unsigned char dom;	/* Day of the month (1-31) */
+	volatile unsigned char month;	/* Month of year (1-12) */
+	volatile unsigned char year;	/* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xff
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+	char offset[6*1024];         /* Magic things may be here, who knows? */
+	struct mostek48t02 regs;     /* Here is what we are interested in.   */
+};
+
+extern enum sparc_clock_type sp_clock_typ;
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code  data from harris doc */
+struct intersil_dt {
+        volatile unsigned char int_csec;
+        volatile unsigned char int_hour;
+        volatile unsigned char int_min;
+        volatile unsigned char int_sec;
+        volatile unsigned char int_month;
+        volatile unsigned char int_day;
+        volatile unsigned char int_year;
+        volatile unsigned char int_dow;
+};
+
+struct intersil {
+	struct intersil_dt clk;
+	struct intersil_dt cmp;
+	volatile unsigned char int_intr_reg;
+	volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP        0x0
+#define INTERSIL_START       0x8
+#define INTERSIL_INTR_DISABLE   0x0
+#define INTERSIL_INTR_ENABLE   0x10
+#define INTERSIL_32K		0x0
+#define INTERSIL_NORMAL		0x0
+#define INTERSIL_24H		0x4 
+#define INTERSIL_INT_100HZ	0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h
new file mode 100644
index 000000000000..0e1bc5801d8a
--- /dev/null
+++ b/include/asm-sparc/mpmbox.h
@@ -0,0 +1,67 @@
+/* $Id: mpmbox.h,v 1.4 1996/04/25 06:13:19 davem Exp $
+ * mpmbox.h:  Interface and defines for the OpenProm mailbox
+ *               facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram.  You probe the device tree prom nodes
+ * for these values.  The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING     0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT          0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN        0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN      0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP     0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/include/asm-sparc/msgbuf.h b/include/asm-sparc/msgbuf.h
new file mode 100644
index 000000000000..8cec9ad0b825
--- /dev/null
+++ b/include/asm-sparc/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_MSGBUF_H
+#define _SPARC64_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	unsigned int   __pad1;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned int   __pad2;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned int   __pad3;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _SPARC64_MSGBUF_H */
diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h
new file mode 100644
index 000000000000..b69543dd3b46
--- /dev/null
+++ b/include/asm-sparc/msi.h
@@ -0,0 +1,31 @@
+/* $Id: msi.h,v 1.3 1996/08/29 09:48:25 davem Exp $
+ * msi.h:  Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN	0xe0001008	/* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE  0x80000000	/* Operate the MSI asynchronously */
+
+
+extern __inline__ void msi_set_sync(void)
+{
+	__asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+			      "andn %%g3, %2, %%g3\n\t"
+			      "sta %%g3, [%0] %1\n\t" : :
+			      "r" (MSI_MBUS_ARBEN),
+			      "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h
new file mode 100644
index 000000000000..efe4e843122d
--- /dev/null
+++ b/include/asm-sparc/mxcc.h
@@ -0,0 +1,137 @@
+/* $Id: mxcc.h,v 1.7 1997/04/20 14:11:46 ecd Exp $
+ * mxcc.h:  Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
+#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
+#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
+#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
+#define MXCC_STEST           0x1C00804  /* Internal self-test */
+#define MXCC_CREG            0x1C00A04  /* Control register */
+#define MXCC_SREG            0x1C00B00  /* Status register */
+#define MXCC_RREG            0x1C00C04  /* Reset register */
+#define MXCC_EREG            0x1C00E00  /* Error code register */
+#define MXCC_PREG            0x1C00F04  /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ *  31                              10    9    8-6   5   4    3   2  1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ *      0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC   0x00000200
+#define MXCC_CTL_PRE   0x00000020
+#define MXCC_CTL_MCE   0x00000010
+#define MXCC_CTL_PARE  0x00000008
+#define MXCC_CTL_ECE   0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME     0x80000000
+#define MXCC_ERR_CE     0x20000000
+#define MXCC_ERR_PEW    0x10000000
+#define MXCC_ERR_PEE    0x08000000
+#define MXCC_ERR_ASE    0x04000000
+#define MXCC_ERR_EIV    0x02000000
+#define MXCC_ERR_MOPC   0x01FF8000
+#define MXCC_ERR_ECODE  0x00007F80
+#define MXCC_ERR_PRIV   0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * |                | MID |                            |
+ * -----------------------------------------------------
+ *  31            21 20-18 17                         0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ void mxcc_set_stream_src(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_SRCSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+extern __inline__ void mxcc_set_stream_dst(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_DESSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+extern __inline__ unsigned long mxcc_get_creg(void)
+{
+	unsigned long mxcc_control;
+
+	__asm__ __volatile__("set -1, %%g2\n\t"
+			     "set -1, %%g3\n\t"
+			     "stda %%g2, [%1] %2\n\t"
+			     "lda [%3] %2, %0\n\t" :
+			     "=r" (mxcc_control) :
+			     "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+			     "r" (MXCC_CREG) : "g2", "g3");
+	return mxcc_control;
+}
+
+extern __inline__ void mxcc_set_creg(unsigned long mxcc_control)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (mxcc_control), "r" (MXCC_CREG),
+			     "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
new file mode 100644
index 000000000000..f2461e8a11ac
--- /dev/null
+++ b/include/asm-sparc/namei.h
@@ -0,0 +1,26 @@
+/* $Id: namei.h,v 1.16 2000/04/13 00:55:54 davem Exp $
+ * linux/include/asm-sparc/namei.h
+ *
+ * Routines to handle famous /usr/gnemul/s*.
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __SPARC_NAMEI_H
+#define __SPARC_NAMEI_H
+
+#define SPARC_BSD_EMUL "/usr/gnemul/sunos/"
+#define SPARC_SOL_EMUL "/usr/gnemul/solaris/"
+
+static inline char * __emul_prefix(void)
+{
+	switch (current->personality) {
+	case PER_SUNOS:
+		return SPARC_BSD_EMUL;
+	case PER_SVR4:
+		return SPARC_SOL_EMUL;
+	default:
+		return NULL;
+	}
+}
+
+#endif /* __SPARC_NAMEI_H */
diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h
new file mode 100644
index 000000000000..62e1d77965f3
--- /dev/null
+++ b/include/asm-sparc/obio.h
@@ -0,0 +1,249 @@
+/* $Id: obio.h,v 1.4 1998/03/09 14:04:55 jj Exp $
+ * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+   36bit PA for these things :) */
+   
+/* CSR space (for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
+ *  ------------------------------------------------------------------------
+ *  35      28 27        20 19            10 9        8 7                 0
+ */
+   
+#define CSR_BASE_ADDR		0xe0000000
+#define CSR_CPU_SHIFT		(32 - 4 - 5)
+#define CSR_XDBUS_SHIFT		8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xF  | DEVID[7:1] |                			           |
+ *  ------------------------------------------------------------------------
+ *  35     32 31        25 24                 				  0
+ */
+   
+#define ECSR_BASE_ADDR		0x00000000
+#define ECSR_CPU_SHIFT		(32 - 5)
+#define ECSR_DEV_SHIFT		(32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE		0xfff00000
+
+#define BW_CID			0x00000000
+#define BW_DBUS_CTRL		0x00000008
+#define BW_DBUS_DATA		0x00000010
+#define BW_CTRL			0x00001000
+#define BW_INTR_TABLE		0x00001040
+#define BW_INTR_TABLE_CLEAR	0x00001080
+#define BW_PRESCALER		0x000010c0
+#define BW_PTIMER_LIMIT		0x00002000
+#define BW_PTIMER_COUNTER2	0x00002004
+#define BW_PTIMER_NDLIMIT	0x00002008
+#define BW_PTIMER_CTRL		0x0000200c
+#define BW_PTIMER_COUNTER	0x00002010
+#define BW_TIMER_LIMIT		0x00003000
+#define BW_TIMER_COUNTER2	0x00003004
+#define BW_TIMER_NDLIMIT	0x00003008
+#define BW_TIMER_CTRL		0x0000300c
+#define BW_TIMER_COUNTER	0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER	0x00000004	/* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE		0xf0000000
+
+#define BB_STAT1		0x00100000
+#define BB_STAT2		0x00120000
+#define BB_STAT3		0x00140000
+#define BB_LEDS			0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR	0x04	/* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR	0x10	/* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR	0x20	/* My fan refuses to work */
+#define BB_STAT2_PWR_INTR	0x40	/* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK		(BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE		0x1F00000
+#define CC_DATSTREAM	0x1F00000  /* Data stream register */
+#define CC_DATSIZE	0x1F0003F  /* Size */
+#define CC_SRCSTREAM	0x1F00100  /* Source stream register */
+#define CC_DESSTREAM	0x1F00200  /* Destination stream register */
+#define CC_RMCOUNT	0x1F00300  /* Count of references and misses */
+#define CC_IPEN		0x1F00406  /* Pending Interrupts */
+#define CC_IMSK		0x1F00506  /* Interrupt Mask */
+#define CC_ICLR		0x1F00606  /* Clear pending Interrupts */
+#define CC_IGEN		0x1F00704  /* Generate Interrupt register */
+#define CC_STEST	0x1F00804  /* Internal self-test */
+#define CC_CREG		0x1F00A04  /* Control register */
+#define CC_SREG		0x1F00B00  /* Status register */
+#define CC_RREG		0x1F00C04  /* Reset register */
+#define CC_EREG		0x1F00E00  /* Error code register */
+#define CC_CID		0x1F00F04  /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ int bw_get_intr_mask(int sbus_level)
+{
+	int mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+extern __inline__ void bw_clear_intr_mask(int sbus_level, int mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned bw_get_prof_limit(int cpu)
+{
+	unsigned limit;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (limit) :
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+	return limit;
+}
+
+extern __inline__ void bw_set_prof_limit(int cpu, unsigned limit)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (limit),
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned bw_get_ctrl(int cpu)
+{
+	unsigned ctrl;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (ctrl) :
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+	return ctrl;
+}
+
+extern __inline__ void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (ctrl),
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+extern __inline__ void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ unsigned cc_get_ipen(void)
+{
+	unsigned pending;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (pending) :
+			      "r" (CC_IPEN),
+			      "i" (ASI_M_MXCC));
+	return pending;
+}
+
+extern __inline__ void cc_set_iclr(unsigned clear)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (clear),
+			      "r" (CC_ICLR),
+			      "i" (ASI_M_MXCC));
+}
+
+extern __inline__ unsigned cc_get_imsk(void)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+	return mask;
+}
+
+extern __inline__ void cc_set_imsk(unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+}
+
+extern __inline__ unsigned cc_get_imsk_other(int cpuid)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+extern __inline__ void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ void cc_set_igen(unsigned gen)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (gen),
+			      "r" (CC_IGEN),
+			      "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast |  devid      |   sid     |              levels mask           |
+ * +-------+-------------+-----------+------------------------------------+
+ *  31      30         23 22       15 14                                 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+	(((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+            
+extern __inline__ void sun4d_send_ipi(int cpu, int level)
+{
+	cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
new file mode 100644
index 000000000000..12929a20f536
--- /dev/null
+++ b/include/asm-sparc/openprom.h
@@ -0,0 +1,258 @@
+/* $Id: openprom.h,v 1.24 2000/06/04 06:23:53 anton Exp $ */
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/vaddrs.h>
+
+/* Empirical constants... */
+#define	LINUX_OPPROM_MAGIC      0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	char *start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	unsigned int which_io;         /* is this in OBIO space? */
+	unsigned int phys_addr;        /* The physical address of this register */
+	unsigned int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	/* 
+	 * We don't know what information this field contain.
+	 * We guess, PCI device function is in bits 15:8
+	 * So, ...
+	 */
+	unsigned int which_io;  /* Let it be which_io */
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+	unsigned int which_io;
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/include/asm-sparc/openpromio.h b/include/asm-sparc/openpromio.h
new file mode 100644
index 000000000000..917fb8e9c633
--- /dev/null
+++ b/include/asm-sparc/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef	_SPARC_OPENPROMIO_H
+#define	_SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+	u_int	oprom_size;		/* Actual size of the oprom_array. */
+	char	oprom_array[1];		/* Holds property names and values. */
+};
+
+#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
+
+#define	OPROMGETOPT		0x20004F01
+#define	OPROMSETOPT		0x20004F02
+#define	OPROMNXTOPT		0x20004F03
+#define	OPROMSETOPT2		0x20004F04
+#define	OPROMNEXT		0x20004F05
+#define	OPROMCHILD		0x20004F06
+#define	OPROMGETPROP		0x20004F07
+#define	OPROMNXTPROP		0x20004F08
+#define	OPROMU2P		0x20004F09
+#define	OPROMGETCONS		0x20004F0A
+#define	OPROMGETFBNAME		0x20004F0B
+#define	OPROMGETBOOTARGS	0x20004F0C
+/* Linux extensions */				/* Arguments in oprom_array: */
+#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
+#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+	int	op_nodeid;		/* PROM Node ID (value-result) */
+	int	op_namelen;		/* Length of op_name. */
+	char	__user *op_name;	/* Pointer to the property name. */
+	int	op_buflen;		/* Length of op_buf (value-result) */
+	char	__user *op_buf;		/* Pointer to buffer. */
+};
+
+#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
+#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
+#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
+#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
+#define	OPIOCGETNEXT	_IOWR('O', 5, int)
+#define	OPIOCGETCHILD	_IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
new file mode 100644
index 000000000000..95944556d8b6
--- /dev/null
+++ b/include/asm-sparc/oplib.h
@@ -0,0 +1,317 @@
+/* $Id: oplib.h,v 1.23 2001/12/21 00:54:31 davem Exp $
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+        PROM_AP1000,  /* actually no prom at all */
+	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries.  One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom.  So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_v0 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Query for input device type */
+
+enum prom_input_device {
+	PROMDEV_IKBD,			/* input from keyboard */
+	PROMDEV_ITTYA,			/* input from ttya */
+	PROMDEV_ITTYB,			/* input from ttyb */
+	PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+	PROMDEV_OSCREEN,		/* to screen */
+	PROMDEV_OTTYA,			/* to ttya */
+	PROMDEV_OTTYB,			/* to ttyb */
+	PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+			 int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+			    int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+					 char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Puts in buffer a prom name in the form name@x,y or name (x for which_io 
+ * and y for first regs phys address
+ */
+extern int prom_getname(int node, char *buf, int buflen);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+			
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent, 
+				      struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
new file mode 100644
index 000000000000..383060e90d94
--- /dev/null
+++ b/include/asm-sparc/page.h
@@ -0,0 +1,181 @@
+/* $Id: page.h,v 1.55 2000/10/30 21:01:41 davem Exp $
+ * page.h:  Various defines and such for MMU operations on the Sparc for
+ *          the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#include <linux/config.h>
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT   13
+#else
+#define PAGE_SHIFT   12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE    (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE    (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	 memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from) 	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * probe_memory() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+
+struct sparc_phys_banks {
+  unsigned long base_addr;
+  unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure.  Entry is valid if context != -1. */
+struct cache_palias {
+	unsigned long vaddr;
+	int context;
+};
+
+extern struct cache_palias *sparc_aliases;
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	((x).pgd)
+#define ctxd_val(x)	((x).ctxd)
+#define pgprot_val(x)	((x).pgprot)
+#define iopgprot_val(x)	((x).iopgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __ctxd(x)	((ctxd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define __iopgprot(x)	((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	(x)
+#define ctxd_val(x)	(x)
+#define pgprot_val(x)	(x)
+#define iopgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+/* #define __pmd(x)        (x) */ /* XXX later */
+#define __pgd(x)	(x)
+#define __ctxd(x)	(x)
+#define __pgprot(x)	(x)
+#define __iopgprot(x)	(x)
+
+#endif
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE	BTFIXUP_SETHI(sparc_unmapped_base)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x)	(x)
+
+#endif /* !(__ASSEMBLY__) */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)  (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#define PAGE_OFFSET	0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x)			((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys		__pa
+#define phys_to_virt		__va
+
+#define pfn_to_page(pfn)	(mem_map + ((pfn)-(pfn_base)))
+#define page_to_pfn(page)	((unsigned long)(((page) - mem_map) + pfn_base))
+#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_PAGE_H */
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
new file mode 100644
index 000000000000..beaf02d364f2
--- /dev/null
+++ b/include/asm-sparc/param.h
@@ -0,0 +1,23 @@
+/* $Id: param.h,v 1.4 2000/10/30 21:01:41 davem Exp $ */
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		100	/* Internal kernel timer frequency */
+# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h
new file mode 100644
index 000000000000..0aba3a82c2eb
--- /dev/null
+++ b/include/asm-sparc/pbm.h
@@ -0,0 +1,46 @@
+/* $Id: pbm.h,v 1.3 1999/12/20 17:06:35 zaitcev Exp $
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ *        Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
+ *   pcic     - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+
+struct linux_pbm_info {
+	int		prom_node;
+	char		prom_name[64];
+	/* struct linux_prom_pci_ranges	pbm_ranges[PROMREG_MAX]; */
+	/* int		num_pbm_ranges; */
+
+	/* Now things for the actual PCI bus probes. */
+	unsigned int	pci_first_busno;	/* Can it be nonzero? */
+	struct pci_bus	*pci_bus;		/* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+	struct linux_pbm_info		*pbm;
+	int				prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
new file mode 100644
index 000000000000..d200a25a7373
--- /dev/null
+++ b/include/asm-sparc/pci.h
@@ -0,0 +1,163 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+extern inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+			unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+			dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#define pci_dac_dma_supported(dev, mask)	(0)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+        return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h
new file mode 100644
index 000000000000..301ae8022ddd
--- /dev/null
+++ b/include/asm-sparc/pcic.h
@@ -0,0 +1,123 @@
+/* $Id: pcic.h,v 1.4 1999/11/17 07:34:20 zaitcev Exp $
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+        void * __iomem          pcic_regs;
+        unsigned long           pcic_io;
+        void * __iomem          pcic_config_space_addr;
+        void * __iomem          pcic_config_space_data;
+	struct resource		pcic_res_regs;
+	struct resource		pcic_res_io;
+	struct resource		pcic_res_cfg_addr;
+	struct resource		pcic_res_cfg_data;
+        struct linux_pbm_info   pbm;
+	struct pcic_ca2irq	*pcic_imap;
+	int			pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
+#define PCI_SIZE_0                      0x44    /* 32 bits */
+#define PCI_SIZE_1                      0x48    /* 32 bits */
+#define PCI_SIZE_2                      0x4c    /* 32 bits */
+#define PCI_SIZE_3                      0x50    /* 32 bits */
+#define PCI_SIZE_4                      0x54    /* 32 bits */
+#define PCI_SIZE_5                      0x58    /* 32 bits */
+#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
+#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
+#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
+#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
+#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
+#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
+#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
+#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
+#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
+#define  PCI_SYS_INT_PENDING_PIO		0x40000000
+#define  PCI_SYS_INT_PENDING_DMA		0x20000000
+#define  PCI_SYS_INT_PENDING_PCI		0x10000000
+#define  PCI_SYS_INT_PENDING_APSR		0x08000000
+#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
+#define  PCI_SYS_INT_PENDING_CLEAR_ALL		0x80
+#define  PCI_SYS_INT_PENDING_CLEAR_PIO		0x40
+#define  PCI_SYS_INT_PENDING_CLEAR_DMA		0x20
+#define  PCI_SYS_INT_PENDING_CLEAR_PCI		0x10
+#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
+#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
+#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
+#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
+#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
+#define PCI_SMBAR0                      0xa0    /* 8  bits */
+#define PCI_MSIZE0                      0xa1    /* 8  bits */
+#define PCI_PMBAR0                      0xa2    /* 8  bits */
+#define PCI_SMBAR1                      0xa4    /* 8  bits */
+#define PCI_MSIZE1                      0xa5    /* 8  bits */
+#define PCI_PMBAR1                      0xa6    /* 8  bits */
+#define PCI_SIBAR                       0xa8    /* 8  bits */
+#define   PCI_SIBAR_ADDRESS_MASK        0xf
+#define PCI_ISIZE                       0xa9    /* 8  bits */
+#define   PCI_ISIZE_16M                 0xf
+#define   PCI_ISIZE_32M                 0xe
+#define   PCI_ISIZE_64M                 0xc
+#define   PCI_ISIZE_128M                0x8
+#define   PCI_ISIZE_256M                0x0
+#define PCI_PIBAR                       0xaa    /* 8  bits */
+#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
+#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
+#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
+#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
+#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
+#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
+#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
+#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
+                                                  ((cpu_irq) & 0xf))
+#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
+#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
+#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
+#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
+#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
+#define   PCI_SYS_STATUS_RESET                  (1<<1)
+#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
+#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
+#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
+#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/include/asm-sparc/pconf.h b/include/asm-sparc/pconf.h
new file mode 100644
index 000000000000..d73c1f1c49dc
--- /dev/null
+++ b/include/asm-sparc/pconf.h
@@ -0,0 +1,25 @@
+/* $Id: pconf.h,v 1.3 1996/04/25 06:13:25 davem Exp $
+ * pconf.h: pathconf() and fpathconf() defines for SunOS
+ *          system call compatibility.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PCONF_H
+#define _SPARC_PCONF_H
+
+#include <linux/fs.h>
+#include <linux/limits.h>
+
+#define _PCONF_LINK       1 /* Max number of links to an object        */
+#define _PCONF_CANON      2 /* TTY input buffer line size              */
+#define _PCONF_INPUT      3 /* Biggest packet a tty can imbibe at once */
+#define _PCONF_NAME       4 /* Filename length max                     */
+#define _PCONF_PATH       5 /* Max size of a pathname                  */
+#define _PCONF_PIPE       6 /* Buffer size for a pipe                  */
+#define _PCONF_CHRESTRICT 7 /* Can only root chown files?              */
+#define _PCONF_NOTRUNC    8 /* Are pathnames truncated if too big?     */
+#define _PCONF_VDISABLE   9 /* Magic char to disable special tty chars */
+#define _PCONF_MAXPCONF   9
+
+#endif /* !(_SPARC_PCONF_H) */
diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h
new file mode 100644
index 000000000000..06066a7aaec3
--- /dev/null
+++ b/include/asm-sparc/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/include/asm-sparc/perfctr.h b/include/asm-sparc/perfctr.h
new file mode 100644
index 000000000000..836873002b75
--- /dev/null
+++ b/include/asm-sparc/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+	/* Enable UltraSparc performance counters, ARG0 is pointer
+	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+	 * the initial PCR register value to use.
+	 */
+	PERFCTR_ON,
+
+	/* Disable UltraSparc performance counters.  The PCR is written
+	 * with zero and the user counter accumulator pointers and
+	 * working PCR register value are forgotten.
+	 */
+	PERFCTR_OFF,
+
+	/* Add current D0 and D1 PIC values into user pointers given
+	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
+	 */
+	PERFCTR_READ,
+
+	/* Clear the PIC register. */
+	PERFCTR_CLRPIC,
+
+	/* Begin using a new PCR value, the pointer to which is passed
+	 * in ARG0.  The PIC is also cleared after the new PCR value is
+	 * written.
+	 */
+	PERFCTR_SETPCR,
+
+	/* Store in pointer given in ARG0 the current PCR register value
+	 * being used.
+	 */
+	PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT	      	0x00000000
+#define  US3_INSTR_CNT	      	0x00000010
+#define  US3_DISPATCH0_IC_MISS	0x00000020
+#define  US3_DISPATCH0_BR_TGT	0x00000030
+#define  US3_DISPATCH0_2ND_BR	0x00000040
+#define  US3_RSTALL_STOREQ	0x00000050
+#define  US3_RSTALL_IU_USE	0x00000060
+#define  US3_IC_REF		0x00000080
+#define  US3_DC_RD		0x00000090
+#define  US3_DC_WR		0x000000a0
+#define  US3_EC_REF		0x000000c0
+#define  US3_EC_WR_HIT_RTO	0x000000d0
+#define  US3_EC_SNOOP_INV	0x000000e0
+#define  US3_EC_RD_MISS		0x000000f0
+#define  US3_PC_PORT0_RD	0x00000100
+#define  US3_SI_SNOOP		0x00000110
+#define  US3_SI_CIQ_FLOW	0x00000120
+#define  US3_SI_OWNED		0x00000130
+#define  US3_SW_COUNT_0		0x00000140
+#define  US3_IU_BR_MISS_TAKEN	0x00000150
+#define  US3_IU_BR_COUNT_TAKEN	0x00000160
+#define  US3_DISP_RS_MISPRED	0x00000170
+#define  US3_FA_PIPE_COMPL	0x00000180
+#define  US3_MC_READS_0		0x00000200
+#define  US3_MC_READS_1		0x00000210
+#define  US3_MC_READS_2		0x00000220
+#define  US3_MC_READS_3		0x00000230
+#define  US3_MC_STALLS_0	0x00000240
+#define  US3_MC_STALLS_2	0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1	0x00000000
+#define  US3_INSTR_CNT_D1	0x00000800
+#define  US3_DISPATCH0_MISPRED	0x00001000
+#define  US3_IC_MISS_CANCELLED	0x00001800
+#define  US3_RE_ENDIAN_MISS	0x00002000
+#define  US3_RE_FPU_BYPASS	0x00002800
+#define  US3_RE_DC_MISS		0x00003000
+#define  US3_RE_EC_MISS		0x00003800
+#define  US3_IC_MISS		0x00004000
+#define  US3_DC_RD_MISS		0x00004800
+#define  US3_DC_WR_MISS		0x00005000
+#define  US3_RSTALL_FP_USE	0x00005800
+#define  US3_EC_MISSES		0x00006000
+#define  US3_EC_WB		0x00006800
+#define  US3_EC_SNOOP_CB	0x00007000
+#define  US3_EC_IC_MISS		0x00007800
+#define  US3_RE_PC_MISS		0x00008000
+#define  US3_ITLB_MISS		0x00008800
+#define  US3_DTLB_MISS		0x00009000
+#define  US3_WC_MISS		0x00009800
+#define  US3_WC_SNOOP_CB	0x0000a000
+#define  US3_WC_SCRUBBED	0x0000a800
+#define  US3_WC_WB_WO_READ	0x0000b000
+#define  US3_PC_SOFT_HIT	0x0000c000
+#define  US3_PC_SNOOP_INV	0x0000c800
+#define  US3_PC_HARD_HIT	0x0000d000
+#define  US3_PC_PORT1_RD	0x0000d800
+#define  US3_SW_COUNT_1		0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
+#define  US3_PC_MS_MISSES	0x0000f800
+#define  US3_MC_WRITES_0	0x00010800
+#define  US3_MC_WRITES_1	0x00011000
+#define  US3_MC_WRITES_2	0x00011800
+#define  US3_MC_WRITES_3	0x00012000
+#define  US3_MC_STALLS_1	0x00012800
+#define  US3_MC_STALLS_3	0x00013000
+#define  US3_RE_RAW_MISS	0x00013800
+#define  US3_FM_PIPE_COMPLETION	0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
new file mode 100644
index 000000000000..126800acd10d
--- /dev/null
+++ b/include/asm-sparc/pgalloc.h
@@ -0,0 +1,69 @@
+/* $Id: pgalloc.h,v 1.16 2001/12/21 04:56:17 davem Exp $ */
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+	unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist           (pgt_quicklists.pgd_cache)
+#define pmd_quicklist           ((unsigned long *)0)
+#define pte_quicklist           (pgt_quicklists.pte_cache)
+#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size		(pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void,	 do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast()		BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd)	BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(pgd)	free_pgd_fast(pgd)
+#define pgd_alloc(mm)	get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address)	BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(pmd)           free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free(pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(struct page *, pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address)	BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr)	BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(pte)	BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, struct page *)
+#define pte_free(pte)		BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte)	pte_free(pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
new file mode 100644
index 000000000000..373a6c327590
--- /dev/null
+++ b/include/asm-sparc/pgtable.h
@@ -0,0 +1,465 @@
+/* $Id: pgtable.h,v 1.110 2001/12/21 04:56:17 davem Exp $ */
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm-sparc/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_shared)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT		SUN4C_PMD_SHIFT
+#define PMD_SIZE        	(1UL << PMD_SHIFT)
+#define PMD_MASK        	(~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE    	1024
+#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_PGD_NR	0
+#define PTE_SIZE		(PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+#define PAGE_SHARED    __pgprot(BTFIXUP_INT(page_shared))
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL	page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page(pgd) BTFIXUP_CALL(pgd_page)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+BTFIXUPDEF_CALL(int, pte_read, pte_t)
+
+extern __inline__ int pte_none(pte_t pte)
+{
+	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+#define pte_read(pte) BTFIXUP_CALL(pte_read)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+extern __inline__ int pmd_none(pmd_t pmd)
+{
+	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+extern int pte_write(pte_t pte) __attribute_const__;
+extern __inline__ int pte_write(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+extern int pte_dirty(pte_t pte) __attribute_const__;
+extern __inline__ int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+extern int pte_young(pte_t pte) __attribute_const__;
+extern __inline__ int pte_young(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+extern int pte_file(pte_t pte) __attribute_const__;
+extern __inline__ int pte_file(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+extern pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+extern pte_t pte_mkclean(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+extern pte_t pte_mkold(pte_t pte) __attribute_const__;
+extern __inline__ pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define page_pte_prot(page, prot)	mk_pte(page, prot)
+#define page_pte(page)			mk_pte(page, __pgprot(0))
+#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+extern pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+extern __inline__ pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+		pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */ 
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)		do{}while(0)
+#define pte_unmap_nested(pte)	do{}while(0)
+
+/* The permissions for pgprot_val to make a page mapped on the obio space */
+extern unsigned int pg_iobits;
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+	struct ctx_list *next;
+	struct ctx_list *prev;
+	unsigned int ctx_number;
+	struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+extern __inline__ void remove_from_ctx_list(struct ctx_list *entry)
+{
+	entry->next->prev = entry->prev;
+	entry->prev->next = entry->next;
+}
+
+extern __inline__ void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+	entry->next = head;
+	(entry->prev = head->prev)->next = entry;
+	head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+extern __inline__ unsigned long
+__get_phys (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return sun4c_get_pte (addr) << PAGE_SHIFT;
+	case sun4m:
+	case sun4d:
+		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+	default:
+		return 0;
+	}
+}
+
+extern __inline__ int
+__get_iospace (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return -1; /* Don't check iospace on sun4c */
+	case sun4m:
+	case sun4d:
+		return (srmmu_get_pte (addr) >> 28);
+	default:
+		return -1;
+	}
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_page_range(struct vm_area_struct *vma,
+			       unsigned long from, unsigned long to,
+			       unsigned long size, pgprot_t prot, int space);
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+			      unsigned long from, unsigned long pfn,
+			      unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h
new file mode 100644
index 000000000000..ee3b9d93187c
--- /dev/null
+++ b/include/asm-sparc/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/* $Id: pgtsrmmu.h,v 1.31 2000/07/16 21:48:52 anton Exp $
+ * pgtsrmmu.h:  SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>	/* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS	65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT		18
+#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT       24
+#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE	64
+#define SRMMU_REAL_PTRS_PER_PMD	64
+#define SRMMU_PTRS_PER_PGD	256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal.  The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD	4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK         0x3
+#define SRMMU_ET_INVALID      0x0
+#define SRMMU_ET_PTD          0x1
+#define SRMMU_ET_PTE          0x2
+#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK    0xfffffff0
+#define SRMMU_PTD_PMASK    0xfffffff0
+#define SRMMU_PTE_PMASK    0xffffff00
+
+/* The pte non-page bits.  Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ *    for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ *    on user pages
+ * 3) use priv and priv_readonly for changing the
+ *    characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE        0x80
+#define SRMMU_DIRTY        0x40
+#define SRMMU_REF          0x20
+#define SRMMU_NOREAD       0x10
+#define SRMMU_EXEC         0x08
+#define SRMMU_WRITE        0x04
+#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV         0x1c
+#define SRMMU_PRIV_RDONLY  0x18
+
+#define SRMMU_FILE         0x40	/* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK	0x1f
+#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK	0x7ffff
+#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
+				    SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+				    SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4.  These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG           0x00000000
+#define SRMMU_CTXTBL_PTR         0x00000100
+#define SRMMU_CTX_REG            0x00000200
+#define SRMMU_FAULT_STATUS       0x00000300
+#define SRMMU_FAULT_ADDR         0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2)					\
+	mov	0, tmp1;						\
+98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
+	orcc	%g0, tmp2, %g0;						\
+	add	tmp1, 1, tmp1;						\
+	bne	98b;							\
+	 save	%sp, -64, %sp;						\
+99:	subcc	tmp1, 1, tmp1;						\
+	bne	99b;							\
+	 restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+extern __inline__ unsigned int srmmu_get_mmureg(void)
+{
+        unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+extern __inline__ void srmmu_set_mmureg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+			     "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS) :
+			     "memory");
+}
+
+extern __inline__ unsigned long srmmu_get_ctable_ptr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS));
+	return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+extern __inline__ void srmmu_set_context(int context)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (context), "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS) : "memory");
+}
+
+extern __inline__ int srmmu_get_context(void)
+{
+	register int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_fstatus(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_faddr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+extern __inline__ void srmmu_flush_whole_tlb(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x400),        /* Flush entire TLB!! */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+extern __inline__ void srmmu_flush_tlb_ctx(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x300),        /* Flush TLB ctx.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_region(unsigned long addr)
+{
+	addr &= SRMMU_PGDIR_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x200), /* Flush TLB region.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr)
+{
+	addr &= SRMMU_REAL_PMD_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x100), /* Flush TLB segment.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_page(unsigned long page)
+{
+	page &= PAGE_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (page),        /* Flush TLB page.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+	unsigned long retval;
+
+	vaddr &= PAGE_MASK;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+	return retval;
+}
+
+extern __inline__ int
+srmmu_get_pte (unsigned long addr)
+{
+	register unsigned long entry;
+        
+	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+				"=r" (entry):
+				"r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h
new file mode 100644
index 000000000000..60bda107f206
--- /dev/null
+++ b/include/asm-sparc/pgtsun4.h
@@ -0,0 +1,171 @@
+/* $Id: pgtsun4.h,v 1.5 2000/06/05 06:08:46 anton Exp $
+ * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       23
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+ 
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h
new file mode 100644
index 000000000000..f53b6dbc5fe3
--- /dev/null
+++ b/include/asm-sparc/pgtsun4c.h
@@ -0,0 +1,172 @@
+/* $Id: pgtsun4c.h,v 1.37 2000/06/05 06:08:46 anton Exp $
+ * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       22
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h
new file mode 100644
index 000000000000..3ddcc6481f09
--- /dev/null
+++ b/include/asm-sparc/poll.h
@@ -0,0 +1,23 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		512
+#define POLLREMOVE	1024
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
new file mode 100644
index 000000000000..9ef1b3db4cbf
--- /dev/null
+++ b/include/asm-sparc/posix_types.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int           __kernel_size_t;
+typedef int                    __kernel_ssize_t;
+typedef long int               __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long		       __kernel_suseconds_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef unsigned short         __kernel_ipc_pid_t;
+typedef unsigned short         __kernel_uid_t;
+typedef unsigned short         __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned short         __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef short                  __kernel_nlink_t;
+typedef long                   __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef unsigned int	       __kernel_uid32_t;
+typedef unsigned int	       __kernel_gid32_t;
+typedef unsigned short	       __kernel_old_uid_t;
+typedef unsigned short	       __kernel_old_gid_t;
+typedef unsigned short	       __kernel_old_dev_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
new file mode 100644
index 000000000000..32c9699367cf
--- /dev/null
+++ b/include/asm-sparc/processor.h
@@ -0,0 +1,130 @@
+/* $Id: processor.h,v 1.83 2001/10/08 09:32:13 davem Exp $
+ * include/asm-sparc/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <linux/a.out.h>
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/segment.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too... 
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE	PAGE_OFFSET
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+	unsigned long *insn_addr;
+	unsigned long insn;
+};
+#endif
+
+typedef struct {
+	int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+	struct pt_regs *kregs;
+	unsigned int _pad1;
+
+	/* Special child fork kpsr/kwim values. */
+	unsigned long fork_kpsr __attribute__ ((aligned (8)));
+	unsigned long fork_kwim;
+
+	/* Floating point regs */
+	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+	unsigned long   fsr;
+	unsigned long   fpqdepth;
+	struct fpq	fpqueue[16];
+	unsigned long flags;
+	mm_segment_t current_ds;
+	struct exec core_exec;     /* just what it says. */
+	int new_signal;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+	.flags = SPARC_FLAG_KTHREAD, \
+	.current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+extern __inline__ void start_thread(struct pt_regs * regs, unsigned long pc,
+				    unsigned long sp)
+{
+	register unsigned long zero asm("g1");
+
+	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+	regs->pc = ((pc & (~3)) - 4);
+	regs->npc = regs->pc + 4;
+	regs->y = 0;
+	zero = 0;
+	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+			     "st\t%1, [%0 + %3 + 0x38]\n\t"
+			     "st\t%%g0, [%0 + %3 + 0x3c]"
+			     : /* no outputs */
+			     : "r" (regs),
+			       "r" (sp - sizeof(struct reg_window)),
+			       "r" (zero),
+			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+			     : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()	barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h
new file mode 100644
index 000000000000..9778b8c8b15b
--- /dev/null
+++ b/include/asm-sparc/psr.h
@@ -0,0 +1,92 @@
+/* $Id: psr.h,v 1.15 1997/10/04 08:54:22 ecd Exp $
+ * psr.h: This file holds the macros for masking off various parts of
+ *        the processor status register on the Sparc. This is valid
+ *        for Version 8. On the V9 this is renamed to the PSTATE
+ *        register and its members are accessed as fields like
+ *        PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ *  ------------------------------------------------------------------------
+ *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
+ *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
+ *  ------------------------------------------------------------------------
+ */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+extern __inline__ unsigned int get_psr(void)
+{
+	unsigned int psr;
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: "=r" (psr)
+	: /* no inputs */
+	: "memory");
+
+	return psr;
+}
+
+extern __inline__ void put_psr(unsigned int new_psr)
+{
+	__asm__ __volatile__(
+		"wr	%0, 0x0, %%psr\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: /* no outputs */
+	: "r" (new_psr)
+	: "memory", "cc");
+}
+
+/* Get the %fsr register.  Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+extern __inline__ unsigned int get_fsr(void)
+{
+	unsigned int fsr = 0;
+
+	__asm__ __volatile__(
+		"st	%%fsr, %1\n\t"
+		"ld	%1, %0\n\t"
+	: "=r" (fsr)
+	: "m" (fsr_storage));
+
+	return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
new file mode 100644
index 000000000000..dd9d94d7e0ae
--- /dev/null
+++ b/include/asm-sparc/ptrace.h
@@ -0,0 +1,167 @@
+/* $Id: ptrace.h,v 1.25 1997/03/04 16:27:25 jj Exp $ */
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the 
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long psr;
+	unsigned long pc;
+	unsigned long npc;
+	unsigned long y;
+	unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};	
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm_offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm_offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SUNATTACH	  10
+#define PTRACE_SUNDETACH	  11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#define PTRACE_GETUCODE           29  /* stupid bsd-ism */
+
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
new file mode 100644
index 000000000000..ed60ebec5930
--- /dev/null
+++ b/include/asm-sparc/reg.h
@@ -0,0 +1,79 @@
+/*
+ * linux/asm-sparc/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other 
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+	int     r_psr;
+#define r_ps r_psr
+        int     r_pc; 
+        int     r_npc;
+        int     r_y;  
+        int     r_g1; 
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h
new file mode 100644
index 000000000000..0514c304e130
--- /dev/null
+++ b/include/asm-sparc/resource.h
@@ -0,0 +1,26 @@
+/* $Id: resource.h,v 1.12 2000/09/23 02:09:21 davem Exp $
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_NPROC		7	/* max number of processes */
+
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY		0x7fffffff
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h
new file mode 100644
index 000000000000..f2c14b5080ed
--- /dev/null
+++ b/include/asm-sparc/ross.h
@@ -0,0 +1,191 @@
+/* $Id: ross.h,v 1.13 1998/01/07 06:49:11 baccala Exp $
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+	unsigned int icreg;
+
+	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+			     "mov %%g1, %0\n\t"
+			     : "=r" (icreg)
+			     : /* no inputs */
+			     : "g1", "memory");
+
+	return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+			     "nop\n\t"
+			     "nop\n\t"
+			     "nop\n\t"
+			     : /* no outputs */
+			     : "r" (icreg)
+			     : "g1", "memory");
+
+	return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_IWHOLE)
+			     : "memory");
+	return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+	unsigned long addr;
+
+	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+				     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+	unsigned long end;
+
+	page &= PAGE_MASK;
+	end = page + PAGE_SIZE;
+	while (page < end) {
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+				     : "memory");
+		page += vac_line_size;
+	}
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h
new file mode 100644
index 000000000000..f4f261dde699
--- /dev/null
+++ b/include/asm-sparc/rtc.h
@@ -0,0 +1,27 @@
+/* $Id: rtc.h,v 1.2 1996/08/21 23:17:39 ecd Exp $
+ *
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+	int	sec;	/* Seconds (0-59) */
+	int	min;	/* Minutes (0-59) */
+	int	hour;	/* Hour (0-23) */
+	int	dow;	/* Day of the week (1-7) */
+	int	dom;	/* Day of the month (1-31) */
+	int	month;	/* Month of year (1-12) */
+	int	year;	/* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h
new file mode 100644
index 000000000000..739ccac5dcf2
--- /dev/null
+++ b/include/asm-sparc/sbi.h
@@ -0,0 +1,115 @@
+/* $Id: sbi.h,v 1.2 1998/03/09 14:04:48 jj Exp $
+ * sbi.h:  SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */	u32		cid;		/* Component ID */
+/* 0x0004 */	u32		ctl;		/* Control */
+/* 0x0008 */	u32		status;		/* Status */
+		u32		_unused1;
+		
+/* 0x0010 */	u32		cfg0;		/* Slot0 config reg */
+/* 0x0014 */	u32		cfg1;		/* Slot1 config reg */
+/* 0x0018 */	u32		cfg2;		/* Slot2 config reg */
+/* 0x001c */	u32		cfg3;		/* Slot3 config reg */
+
+/* 0x0020 */	u32		stb0;		/* Streaming buf control for slot 0 */
+/* 0x0024 */	u32		stb1;		/* Streaming buf control for slot 1 */
+/* 0x0028 */	u32		stb2;		/* Streaming buf control for slot 2 */
+/* 0x002c */	u32		stb3;		/* Streaming buf control for slot 3 */
+
+/* 0x0030 */	u32		intr_state;	/* Interrupt state */
+/* 0x0034 */	u32		intr_tid;	/* Interrupt target ID */
+/* 0x0038 */	u32		intr_diag;	/* Interrupt diagnostics */
+};
+
+#define SBI_CID			0x02800000
+#define SBI_CTL			0x02800004
+#define SBI_STATUS		0x02800008
+#define SBI_CFG0		0x02800010
+#define SBI_CFG1		0x02800014
+#define SBI_CFG2		0x02800018
+#define SBI_CFG3		0x0280001c
+#define SBI_STB0		0x02800020
+#define SBI_STB1		0x02800024
+#define SBI_STB2		0x02800028
+#define SBI_STB3		0x0280002c
+#define SBI_INTR_STATE		0x02800030
+#define SBI_INTR_TID		0x02800034
+#define SBI_INTR_DIAG		0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK	0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ *		   +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
+ *		   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ *  Bits           31      27      23      19      15      11      7       3      0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+extern __inline__ int acquire_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("swapa [%2] %3, %0" :
+			      "=r" (mask) :
+			      "0" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+extern __inline__ void release_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ void set_sbi_tid(int devid, int targetid)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (targetid),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+			      "i" (ASI_M_CTL));
+}
+
+extern __inline__ int get_sbi_ctl(int devid, int cfgno)
+{
+	int cfg;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (cfg) :
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+	return cfg;
+}
+
+extern __inline__ void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (cfg),
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
new file mode 100644
index 000000000000..3a8b3908728a
--- /dev/null
+++ b/include/asm-sparc/sbus.h
@@ -0,0 +1,142 @@
+/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+/* #include <asm/iommu.h> */ /* Unused since we use opaque iommu (|io-unit) */
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+extern __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+extern __inline__ int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct sbus_bus	*bus;       /* Back ptr to sbus */
+	struct sbus_dev	*next;      /* next device on this SBus or null */
+	struct sbus_dev	*child;     /* For ledma and espdma on sun4m */
+	struct sbus_dev	*parent;    /* Parent device if not toplevel */
+	int prom_node;              /* PROM device tree node for this device */
+	char prom_name[64];         /* PROM device name */
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers, ranges_applied;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	void			*iommu;		/* Opaque IOMMU cookie */
+	struct sbus_dev		*devices;	/* Link to devices on this SBus */
+	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
+	int			prom_node;	/* PROM device tree node for this SBus */
+	char			prom_name[64];  /* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int devid;
+	int board;
+};
+
+extern struct sbus_bus *sbus_root;
+
+extern __inline__ int
+sbus_is_slave(struct sbus_dev *dev)
+{
+	/* XXX Have to write this for sun4c's */
+	return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+        
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+			struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP 
+ * node values to "intr" node values, and is platform 
+ * dependent.  If only we could call OBP with 
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
new file mode 100644
index 000000000000..a4fcf9ac9649
--- /dev/null
+++ b/include/asm-sparc/scatterlist.h
@@ -0,0 +1,22 @@
+/* $Id: scatterlist.h,v 1.8 2001/12/17 07:05:15 davem Exp $ */
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+
+	unsigned int length;
+
+	__u32 dvma_address; /* A place to hang host-specific addresses at. */
+	__u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg)     ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h
new file mode 100644
index 000000000000..6832841df051
--- /dev/null
+++ b/include/asm-sparc/sections.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-sparc/segment.h b/include/asm-sparc/segment.h
new file mode 100644
index 000000000000..a1b7ffc9eec9
--- /dev/null
+++ b/include/asm-sparc/segment.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SEGMENT_H
+#define __SPARC_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
new file mode 100644
index 000000000000..60ac5fd9eb48
--- /dev/null
+++ b/include/asm-sparc/semaphore.h
@@ -0,0 +1,196 @@
+#ifndef _SPARC_SEMAPHORE_H
+#define _SPARC_SEMAPHORE_H
+
+/* Dinky, good for nothing, just barely irq safe, Sparc semaphores. */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	atomic24_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC24_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	atomic24_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int __down_interruptible(struct semaphore * sem);
+extern int __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+static inline void down(struct semaphore * sem)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+
+	might_sleep();
+
+	ptr = &(sem->count.counter);
+	increment = 1;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n\t"
+	"tst	%%g2\n\t"
+	"bl	2f\n\t"
+	" nop\n"
+	"1:\n\t"
+	".subsection 2\n"
+	"2:\n\t"
+	"save	%%sp, -64, %%sp\n\t"
+	"mov	%%g1, %%l1\n\t"
+	"mov	%%g5, %%l5\n\t"
+	"call	%3\n\t"
+	" mov	%%g1, %%o0\n\t"
+	"mov	%%l1, %%g1\n\t"
+	"ba	1b\n\t"
+	" restore %%l5, %%g0, %%g5\n\t"
+	".previous\n"
+	: "=&r" (increment)
+	: "0" (increment), "r" (ptr), "i" (__down)
+	: "g3", "g4", "g7", "memory", "cc");
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+
+	might_sleep();
+
+	ptr = &(sem->count.counter);
+	increment = 1;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n\t"
+	"tst	%%g2\n\t"
+	"bl	2f\n\t"
+	" clr	%%g2\n"
+	"1:\n\t"
+	".subsection 2\n"
+	"2:\n\t"
+	"save	%%sp, -64, %%sp\n\t"
+	"mov	%%g1, %%l1\n\t"
+	"mov	%%g5, %%l5\n\t"
+	"call	%3\n\t"
+	" mov	%%g1, %%o0\n\t"
+	"mov	%%l1, %%g1\n\t"
+	"mov	%%l5, %%g5\n\t"
+	"ba	1b\n\t"
+	" restore %%o0, %%g0, %%g2\n\t"
+	".previous\n"
+	: "=&r" (increment)
+	: "0" (increment), "r" (ptr), "i" (__down_interruptible)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return increment;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+
+	ptr = &(sem->count.counter);
+	increment = 1;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n\t"
+	"tst	%%g2\n\t"
+	"bl	2f\n\t"
+	" clr	%%g2\n"
+	"1:\n\t"
+	".subsection 2\n"
+	"2:\n\t"
+	"save	%%sp, -64, %%sp\n\t"
+	"mov	%%g1, %%l1\n\t"
+	"mov	%%g5, %%l5\n\t"
+	"call	%3\n\t"
+	" mov	%%g1, %%o0\n\t"
+	"mov	%%l1, %%g1\n\t"
+	"mov	%%l5, %%g5\n\t"
+	"ba	1b\n\t"
+	" restore %%o0, %%g0, %%g2\n\t"
+	".previous\n"
+	: "=&r" (increment)
+	: "0" (increment), "r" (ptr), "i" (__down_trylock)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return increment;
+}
+
+static inline void up(struct semaphore * sem)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+
+	ptr = &(sem->count.counter);
+	increment = 1;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_add\n\t"
+	" add	%%o7, 8, %%o7\n\t"
+	"tst	%%g2\n\t"
+	"ble	2f\n\t"
+	" nop\n"
+	"1:\n\t"
+	".subsection 2\n"
+	"2:\n\t"
+	"save	%%sp, -64, %%sp\n\t"
+	"mov	%%g1, %%l1\n\t"
+	"mov	%%g5, %%l5\n\t"
+	"call	%3\n\t"
+	" mov	%%g1, %%o0\n\t"
+	"mov	%%l1, %%g1\n\t"
+	"ba	1b\n\t"
+	" restore %%l5, %%g0, %%g5\n\t"
+	".previous\n"
+	: "=&r" (increment)
+	: "0" (increment), "r" (ptr), "i" (__up)
+	: "g3", "g4", "g7", "memory", "cc");
+}	
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_SEMAPHORE_H) */
diff --git a/include/asm-sparc/sembuf.h b/include/asm-sparc/sembuf.h
new file mode 100644
index 000000000000..a79c4bb3c08a
--- /dev/null
+++ b/include/asm-sparc/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	unsigned int	__pad1;
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned int	__pad2;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/include/asm-sparc/setup.h b/include/asm-sparc/setup.h
new file mode 100644
index 000000000000..b3af958a2ad2
--- /dev/null
+++ b/include/asm-sparc/setup.h
@@ -0,0 +1,10 @@
+/*
+ *	Just a place holder. 
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif /* _SPARC_SETUP_H */
diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h
new file mode 100644
index 000000000000..b4ca2d94bf08
--- /dev/null
+++ b/include/asm-sparc/sfp-machine.h
@@ -0,0 +1,207 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc userland (_Q_*) version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#include <linux/config.h>
+   
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("addcc %r7,%8,%2\n\t"					\
+	   "addxcc %r5,%6,%1\n\t"					\
+	   "addx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("subcc %r7,%8,%2\n\t"					\
+	    "subxcc %r5,%6,%1\n\t"					\
+	    "subx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "addcc %r8,%9,%1\n\t"					\
+	    "addxcc %r6,%7,%0\n\t"					\
+	    "addxcc %r4,%5,%%g2\n\t"					\
+	    "addx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "subcc %r8,%9,%1\n\t"					\
+	    "subxcc %r6,%7,%0\n\t"					\
+	    "subxcc %r4,%5,%%g2\n\t"					\
+	    "subx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  __asm__ ("addcc %3,%4,%3\n\t"						\
+	   "addxcc %2,%%g0,%2\n\t"					\
+	   "addxcc %1,%%g0,%1\n\t"					\
+	   "addx %0,%%g0,%0\n\t"					\
+	   : "=&r" ((USItype)(x3)),					\
+	     "=&r" ((USItype)(x2)),					\
+	     "=&r" ((USItype)(x1)),					\
+	     "=&r" ((USItype)(x0))					\
+	   : "rI" ((USItype)(i)),					\
+	     "0" ((USItype)(x3)),					\
+	     "1" ((USItype)(x2)),					\
+	     "2" ((USItype)(x1)),					\
+	     "3" ((USItype)(x0))					\
+	   : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE	((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE	((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#endif
diff --git a/include/asm-sparc/shmbuf.h b/include/asm-sparc/shmbuf.h
new file mode 100644
index 000000000000..1ff9da8bec73
--- /dev/null
+++ b/include/asm-sparc/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	unsigned int		__pad1;
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned int		__pad2;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned int		__pad3;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
new file mode 100644
index 000000000000..bb93a6f74a38
--- /dev/null
+++ b/include/asm-sparc/shmparam.h
@@ -0,0 +1,12 @@
+/* $Id: shmparam.h,v 1.6 1999/12/09 10:32:41 davem Exp $ */
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+		(sparc_cpu_model == sun4c ? (64 * 1024) : \
+		 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
new file mode 100644
index 000000000000..7fa2c7d01ab4
--- /dev/null
+++ b/include/asm-sparc/sigcontext.h
@@ -0,0 +1,63 @@
+/* $Id: sigcontext.h,v 1.14 1999/09/06 08:22:05 jj Exp $ */
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	char *sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct {
+		unsigned long	locals[8];
+		unsigned long	ins[8];
+	} sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+	struct {
+		unsigned long psr;
+		unsigned long pc;
+		unsigned long npc;
+		unsigned long y;
+		unsigned long u_regs[16]; /* globals and ins */
+	}		si_regs;
+	int		si_mask;
+} __siginfo_t;
+
+typedef struct {
+	unsigned   long si_float_regs [32];
+	unsigned   long si_fsr;
+	unsigned   long si_fpqdepth;
+	struct {
+		unsigned long *insn_addr;
+		unsigned long insn;
+	} si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
new file mode 100644
index 000000000000..2c3ea8b22448
--- /dev/null
+++ b/include/asm-sparc/siginfo.h
@@ -0,0 +1,21 @@
+/* $Id: siginfo.h,v 1.9 2002/02/08 03:57:18 davem Exp $
+ * siginfo.c:
+ */
+
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T		unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
new file mode 100644
index 000000000000..d8211cb6e6b4
--- /dev/null
+++ b/include/asm-sparc/signal.h
@@ -0,0 +1,234 @@
+/* $Id: signal.h,v 1.35 1999/09/06 08:22:04 jj Exp $ */
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG	64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN	32
+#define SIGRTMAX	__NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define	_NSIG		__NEW_NSIG
+#define __new_sigset_t	sigset_t
+#define __new_sigaction	sigaction
+#define __old_sigset_t	old_sigset_t
+#define __old_sigaction	old_sigaction
+#else
+#define _NSIG		__OLD_NSIG
+#define __old_sigset_t	sigset_t
+#define __old_sigaction	sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+	unsigned long	sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+	char *the_stack;
+	int   cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_INTERRUPT	0x10u
+#define SA_NOMASK	0x20u
+#define SA_SHIRQ	0x40u
+#define SA_NOCLDWAIT	0x100u
+#define SA_SIGINFO	0x200u
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ *
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_STATIC_ALLOC		0x80
+#endif
+
+/* Type of a signal handler.  */
+#ifdef __KERNEL__
+typedef void (*__sighandler_t)(int, int, struct sigcontext *, char *);
+#else
+typedef void (*__sighandler_t)(int);
+#endif
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
+	__new_sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct __new_sigaction	sa;
+	void			__user *ka_restorer;
+};
+
+struct __old_sigaction {
+	__sighandler_t	sa_handler;
+	__old_sigset_t	sa_mask;
+	unsigned long	sa_flags;
+	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+	void		__user *ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+struct sparc_deliver_cookie {
+	int restart_syscall;
+	unsigned long orig_i0;
+};
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
new file mode 100644
index 000000000000..f986c0d0922a
--- /dev/null
+++ b/include/asm-sparc/smp.h
@@ -0,0 +1,176 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ *	Private routines/data
+ */
+ 
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+
+/*
+ *	General functions that each host system must provide.
+ */
+ 
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_message_pass, int, int, unsigned long, int)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_message_pass(target,msg,data,wait) BTFIXUP_CALL(smp_message_pass)(target,msg,data,wait)
+
+extern __inline__ void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+extern __inline__ void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+extern __inline__ void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+extern __inline__ void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3)
+{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+extern __inline__ void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
+extern __inline__ void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+
+extern __inline__ int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait)
+{
+	xc1((smpfunc_t)func, (unsigned long)info);
+	return 0;
+}
+
+extern __volatile__ int __cpu_number_map[NR_CPUS];
+extern __volatile__ int __cpu_logical_map[NR_CPUS];
+
+extern __inline__ int cpu_logical_map(int cpu)
+{
+	return __cpu_logical_map[cpu];
+}
+extern __inline__ int cpu_number_map(int cpu)
+{
+	return __cpu_number_map[cpu];
+}
+
+extern __inline__ int hard_smp4m_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, 12, %0\n\t"
+			     "and %0, 3, %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+
+extern __inline__ int hard_smp4d_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+	return cpuid;
+}
+
+#ifndef MODULE
+extern __inline__ int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	/* Black box - sun4m
+		__asm__ __volatile__("rd %%tbr, %0\n\t"
+				     "srl %0, 12, %0\n\t"
+				     "and %0, 3, %0\n\t" :
+				     "=&r" (cpuid));
+	             - sun4d
+	   	__asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+	   			     "nop; nop" :
+	   			     "=&r" (cpuid));
+	   See btfixup.h and btfixupprep.c to understand how a blackbox works.
+	 */
+	__asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+			     "sethi %%hi(boot_cpu_id), %0\n\t"
+			     "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+#else
+extern __inline__ int hard_smp_processor_id(void)
+{
+	int cpuid;
+	
+	__asm__ __volatile__("mov %%o7, %%g1\n\t"
+			     "call ___f___hard_smp_processor_id\n\t"
+			     " nop\n\t"
+			     "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+	return cpuid;
+}
+#endif
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
+#define prof_counter(__cpu)		cpu_data(__cpu).counter
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor.  This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU          0xFB
+#define MBOX_IDLECPU          0xFC
+#define MBOX_IDLECPU2         0xFD
+#define MBOX_STOPCPU2         0xFE
+
+#endif /* SMP */
+
+#define NO_PROC_ID            0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h
new file mode 100644
index 000000000000..9b9c28ed748e
--- /dev/null
+++ b/include/asm-sparc/smpprim.h
@@ -0,0 +1,54 @@
+/*  $Id: smpprim.h,v 1.5 1996/08/29 09:48:49 davem Exp $
+ *  smpprim.h:  SMP locking primitives on the Sparc
+ *
+ *  God knows we won't be actually using this code for some time
+ *  but I thought I'd write it since I knew how.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
+ * value.  On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+extern __inline__ __volatile__ char test_and_set(void *addr)
+{
+	char state = 0;
+
+	__asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
+			     "=r" (addr), "=r" (state) :
+			     "0" (addr), "1" (state) : "memory");
+
+	return state;
+}
+
+/* Initialize a spin-lock. */
+extern __inline__ __volatile__ smp_initlock(void *spinlock)
+{
+	/* Unset the lock. */
+	*((unsigned char *) spinlock) = 0;
+
+	return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+extern __inline__ __volatile__ smp_lock(void *addr)
+{
+	while(test_and_set(addr) == 0xff)
+		;
+
+	/* We now have the lock */
+	return;
+}
+
+/* This routine releases the lock at ADDR. */
+extern __inline__ __volatile__ smp_unlock(void *addr)
+{
+	*((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h
new file mode 100644
index 000000000000..c1154e3ecfdf
--- /dev/null
+++ b/include/asm-sparc/socket.h
@@ -0,0 +1,55 @@
+/* $Id: socket.h,v 1.17 2001/06/13 16:25:03 davem Exp $ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_PASSCRED	0x0002
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_PEERCRED	0x0040
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN	0x8000
+
+/* wha!??? */
+#define SO_DONTLINGER   (~SO_LINGER)  /* Older SunOS compat. hack */
+
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK	0x000b
+#define SO_PRIORITY	0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER	0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME		0x001c
+#define SO_TIMESTAMP		0x001d
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		0x100e
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-sparc/sockios.h b/include/asm-sparc/sockios.h
new file mode 100644
index 000000000000..0c01b597b06f
--- /dev/null
+++ b/include/asm-sparc/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/include/asm-sparc/solerrno.h b/include/asm-sparc/solerrno.h
new file mode 100644
index 000000000000..8abce7e4639f
--- /dev/null
+++ b/include/asm-sparc/solerrno.h
@@ -0,0 +1,132 @@
+/* $Id: solerrno.h,v 1.5 1996/04/25 06:13:32 davem Exp $
+ * solerrno.h: Solaris error return codes for compatibility.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SOLERRNO_H
+#define _SPARC_SOLERRNO_H
+
+#define SOL_EPERM          1     /* Required superuser access perms  */
+#define SOL_ENOENT         2     /* File or directory does not exist */
+#define SOL_ESRCH          3     /* Process did not exist            */
+#define	SOL_EINTR          4     /* System call was interrupted      */
+#define	SOL_EIO            5     /* An i/o error occurred            */
+#define	SOL_ENXIO          6     /* Device or Address does not exist */
+#define	SOL_E2BIG          7	 /* Too many arguments were given    */
+#define	SOL_ENOEXEC        8     /* Header of executable was munged  */
+#define	SOL_EBADF          9     /* Bogus file number                */
+#define	SOL_ECHILD         10    /* No children of process exist     */
+#define	SOL_EAGAIN         11    /* beep beep, "try again later"     */
+#define	SOL_ENOMEM         12    /* No memory available              */
+#define	SOL_EACCES         13    /* Access not allowed               */
+#define	SOL_EFAULT         14    /* Address passed was invalid       */
+#define	SOL_ENOTBLK        15    /* blkdev op on non-block device    */
+#define	SOL_EBUSY          16    /* Mounted device was busy          */
+#define	SOL_EEXIST         17    /* File specified already exists    */
+#define	SOL_EXDEV          18    /* Link request across diff devices */
+#define	SOL_ENODEV         19    /* Device does not exist on system  */
+#define	SOL_ENOTDIR        20    /* Dir operation on non-directory   */
+#define	SOL_EISDIR         21    /* File was of directory type       */
+#define	SOL_EINVAL         22    /* Argument passed was invalid      */
+#define	SOL_ENFILE         23    /* No more room in file table       */
+#define	SOL_EMFILE         24    /* Proc has too many files open     */
+#define	SOL_ENOTTY         25    /* Ioctl was invalid for req device */
+#define	SOL_ETXTBSY        26    /* Text file in busy state          */
+#define	SOL_EFBIG          27    /* Too big of a file for operation  */
+#define	SOL_ENOSPC         28    /* Disk is full                     */
+#define	SOL_ESPIPE         29    /* Seek attempted on non-seeking dev*/
+#define	SOL_EROFS          30    /* Write attempted on read-only fs  */
+#define	SOL_EMLINK         31    /* Too many links in file search    */
+#define	SOL_EPIPE          32    /* Call a plumber                   */
+#define	SOL_EDOM           33    /* Argument was out of fct domain   */
+#define	SOL_ERANGE         34    /* Could not represent math result  */
+#define	SOL_ENOMSG         35    /* Message of req type doesn't exist */
+#define	SOL_EIDRM          36    /* Identifier has been removed      */
+#define	SOL_ECHRNG         37    /* Req channel number out of range  */
+#define	SOL_EL2NSYNC       38    /* Could not sync at run level 2    */
+#define	SOL_EL3HLT         39    /* Halted at run level 3            */
+#define	SOL_EL3RST         40    /* Reset at run level 3             */
+#define	SOL_ELNRNG         41    /* Out of range link number         */
+#define	SOL_EUNATCH        42    /* Driver for protocol not attached */
+#define	SOL_ENOCSI         43    /* CSI structure not around         */
+#define	SOL_EL2HLT         44    /* Halted at run level 2            */
+#define	SOL_EDEADLK        45    /* Deadlock condition detected      */
+#define	SOL_ENOLCK         46    /* Record locks unavailable         */
+#define	SOL_ECANCELED      47    /* Cancellation of oper. happened   */
+#define	SOL_ENOTSUP        48    /* Attempt of unsupported operation */
+#define	SOL_EDQUOT         49    /* Users disk quota exceeded        */
+#define	SOL_EBADE          50    /* Invalid exchange                 */
+#define	SOL_EBADR          51    /* Request descriptor was invalid   */
+#define	SOL_EXFULL         52    /* Full exchange                    */
+#define	SOL_ENOANO         53    /* ano does not exist               */
+#define	SOL_EBADRQC        54    /* Req code was invalid             */
+#define	SOL_EBADSLT        55    /* Bad slot number                  */
+#define	SOL_EDEADLOCK      56    /* Deadlock in fs error             */
+#define	SOL_EBFONT         57    /* Font file format invalid         */
+/* YOW, I LOVE SYSV STREAMS!!!! */
+#define	SOL_ENOSTR         60    /* Stream-op on non-stream dev      */
+#define	SOL_ENODATA        61    /* No data avail at this time       */
+#define	SOL_ETIME          62    /* Expiration of time occurred      */
+#define	SOL_ENOSR          63    /* Streams resources exhausted      */
+#define	SOL_ENONET         64    /* No network connected             */
+#define	SOL_ENOPKG         65    /* Non-installed package            */
+#define	SOL_EREMOTE        66    /* Object was on remote machine     */
+#define	SOL_ENOLINK        67    /* Cut link                         */
+#define	SOL_EADV           68    /* Error in advertise               */
+#define	SOL_ESRMNT         69    /* Some magic srmount problem       */
+#define	SOL_ECOMM          70    /* During send, comm error occurred */
+#define	SOL_EPROTO         71    /* Protocol botch                   */
+#define	SOL_EMULTIHOP      74    /* Multihop attempted               */
+#define	SOL_EBADMSG        77    /* Message was unreadable           */
+#define	SOL_ENAMETOOLONG   78    /* Too long of a path name          */
+#define	SOL_EOVERFLOW      79    /* Data type too small for datum    */
+#define	SOL_ENOTUNIQ       80    /* Logical name was not unique      */
+#define	SOL_EBADFD         81    /* Op cannot be performed on fd     */
+#define	SOL_EREMCHG        82    /* Remote address is now different  */
+#define	SOL_ELIBACC        83    /* Shared lib could not be accessed */
+#define	SOL_ELIBBAD        84    /* ShLib is corrupted in some way   */
+#define	SOL_ELIBSCN        85    /* A.out ShLib problems             */
+#define	SOL_ELIBMAX        86    /* Exceeded ShLib linkage limit     */
+#define	SOL_ELIBEXEC       87    /* Execution of ShLib attempted     */
+#define	SOL_EILSEQ         88    /* Bad byte sequence found          */
+#define	SOL_ENOSYS         89    /* Invalid filesystem operation     */
+#define	SOL_ELOOP          90    /* Detected loop in symbolic links  */
+#define	SOL_ERESTART       91    /* System call is restartable       */
+#define	SOL_ESTRPIPE       92    /* Do not sleep in head of stream   */
+#define	SOL_ENOTEMPTY      93    /* Rmdir of non-empty directory     */
+#define	SOL_EUSERS         94    /* Over abundance of users for ufs  */
+#define	SOL_ENOTSOCK       95    /* Sock-op on non-sock              */
+#define	SOL_EDESTADDRREQ   96    /* No dest addr given, but needed   */
+#define	SOL_EMSGSIZE       97    /* Msg too big                      */
+#define	SOL_EPROTOTYPE     98    /* Bad socket protocol              */
+#define	SOL_ENOPROTOOPT    99    /* Unavailable protocol             */
+#define	SOL_EPROTONOSUPPORT 120  /* Unsupported protocol             */
+#define	SOL_ESOCKTNOSUPPORT 121  /* Unsupported socket type          */
+#define	SOL_EOPNOTSUPP     122   /* Unsupported sock-op              */
+#define	SOL_EPFNOSUPPORT   123   /* Unsupported protocol family      */
+#define	SOL_EAFNOSUPPORT   124   /* Unsup addr family for protocol   */
+#define	SOL_EADDRINUSE     125   /* Req addr is already in use       */
+#define	SOL_EADDRNOTAVAIL  126   /* Req addr not available right now */
+#define	SOL_ENETDOWN       127   /* Your subnet is on fire           */
+#define	SOL_ENETUNREACH    128   /* Someone playing with gateway and */
+                                 /* did not tell you he was going to */
+#define	SOL_ENETRESET      129   /* Buy less-buggy ethernet cards    */
+#define	SOL_ECONNABORTED   130   /* Aborted connection due to sw     */
+#define	SOL_ECONNRESET     131   /* Your peers reset your connection */
+#define	SOL_ENOBUFS        132   /* No buffer space available        */
+#define	SOL_EISCONN        133   /* Connect on already connected     */
+                                 /* socket attempted                 */
+#define	SOL_ENOTCONN       134   /* Comm on non-connected socket     */
+#define	SOL_ESHUTDOWN      143   /* Op attempted after sock-shutdown */
+#define	SOL_ETOOMANYREFS   144   /* Reference limit exceeded         */
+#define	SOL_ETIMEDOUT      145   /* Timed out connection             */
+#define	SOL_ECONNREFUSED   146   /* Connection refused by remote host*/
+#define	SOL_EHOSTDOWN      147   /* Remote host is up in flames      */
+#define	SOL_EHOSTUNREACH   148   /* Make a left at Easton Ave.....   */
+#define	SOL_EWOULDBLOCK    EAGAIN /* Just an alias */
+#define	SOL_EALREADY       149   /* Operation is already occurring   */
+#define	SOL_EINPROGRESS    150   /* Operation is happening now       */
+#define	SOL_ESTALE         151   /* Fungus growth on NFS file handle */
+
+#endif /* !(_SPARC_SOLERRNO_H) */
diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h
new file mode 100644
index 000000000000..0cbd87ad4912
--- /dev/null
+++ b/include/asm-sparc/spinlock.h
@@ -0,0 +1,238 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+struct _spinlock_debug {
+	unsigned char lock;
+	unsigned long owner_pc;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+};
+typedef struct _spinlock_debug spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0, 0 }
+#define spin_lock_init(lp)	do { *(lp)= SPIN_LOCK_UNLOCKED; } while(0)
+#define spin_is_locked(lp)  (*((volatile unsigned char *)(&((lp)->lock))) != 0)
+#define spin_unlock_wait(lp)	do { barrier(); } while(*(volatile unsigned char *)(&(lp)->lock))
+
+extern void _do_spin_lock(spinlock_t *lock, char *str);
+extern int _spin_trylock(spinlock_t *lock);
+extern void _do_spin_unlock(spinlock_t *lock);
+
+#define _raw_spin_trylock(lp)	_spin_trylock(lp)
+#define _raw_spin_lock(lock)	_do_spin_lock(lock, "spin_lock")
+#define _raw_spin_unlock(lock)	_do_spin_unlock(lock)
+
+struct _rwlock_debug {
+	volatile unsigned int lock;
+	unsigned long owner_pc;
+	unsigned long reader_pc[NR_CPUS];
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+};
+typedef struct _rwlock_debug rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0, {0} }
+
+#define rwlock_init(lp)	do { *(lp)= RW_LOCK_UNLOCKED; } while(0)
+
+extern void _do_read_lock(rwlock_t *rw, char *str);
+extern void _do_read_unlock(rwlock_t *rw, char *str);
+extern void _do_write_lock(rwlock_t *rw, char *str);
+extern void _do_write_unlock(rwlock_t *rw);
+
+#define _raw_read_lock(lock)	\
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_read_lock(lock, "read_lock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_read_unlock(lock, "read_unlock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_write_lock(lock, "write_lock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_write_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+#else /* !CONFIG_DEBUG_SPINLOCK */
+
+typedef struct {
+	unsigned char lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED	(spinlock_t) { 0 }
+
+#define spin_lock_init(lock)   (*((unsigned char *)(lock)) = 0)
+#define spin_is_locked(lock)    (*((volatile unsigned char *)(lock)) != 0)
+
+#define spin_unlock_wait(lock) \
+do { \
+	barrier(); \
+} while(*((volatile unsigned char *)lock))
+
+extern __inline__ void _raw_spin_lock(spinlock_t *lock)
+{
+	__asm__ __volatile__(
+	"\n1:\n\t"
+	"ldstub	[%0], %%g2\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2f\n\t"
+	" ldub	[%0], %%g2\n\t"
+	".subsection	2\n"
+	"2:\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2b\n\t"
+	" ldub	[%0], %%g2\n\t"
+	"b,a	1b\n\t"
+	".previous\n"
+	: /* no outputs */
+	: "r" (lock)
+	: "g2", "memory", "cc");
+}
+
+extern __inline__ int _raw_spin_trylock(spinlock_t *lock)
+{
+	unsigned int result;
+	__asm__ __volatile__("ldstub [%1], %0"
+			     : "=r" (result)
+			     : "r" (lock)
+			     : "memory");
+	return (result == 0);
+}
+
+extern __inline__ void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ */
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+
+#define rwlock_init(lp)	do { *(lp)= RW_LOCK_UNLOCKED; } while(0)
+
+
+/* Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ *	------------------------------------
+ *	| 24-bit counter           | wlock |  rwlock_t
+ *	------------------------------------
+ *	 31                       8 7     0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+extern __inline__ void _read_lock(rwlock_t *rw)
+{
+	register rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define _raw_read_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_read_lock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+extern __inline__ void _read_unlock(rwlock_t *rw)
+{
+	register rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_exit\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define _raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_read_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+extern __inline__ void _raw_write_lock(rwlock_t *rw)
+{
+	register rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_write_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define _raw_write_unlock(rw)	do { (rw)->lock = 0; } while(0)
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
new file mode 100644
index 000000000000..a5b4272f2894
--- /dev/null
+++ b/include/asm-sparc/stat.h
@@ -0,0 +1,77 @@
+/* $Id: stat.h,v 1.12 2000/08/04 05:35:55 davem Exp $ */
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short	st_dev;
+	unsigned long	st_ino;
+	unsigned short	st_mode;
+	short		st_nlink;
+	unsigned short	st_uid;
+	unsigned short	st_gid;
+	unsigned short	st_rdev;
+	long		st_size;
+	long		st_atime;
+	unsigned long	st_atime_nsec;
+	long		st_mtime;
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	unsigned long	__unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
new file mode 100644
index 000000000000..d623f144247d
--- /dev/null
+++ b/include/asm-sparc/statfs.h
@@ -0,0 +1,7 @@
+/* $Id: statfs.h,v 1.4 1996/06/07 00:41:05 ecd Exp $ */
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
new file mode 100644
index 000000000000..cb1e923356c6
--- /dev/null
+++ b/include/asm-sparc/string.h
@@ -0,0 +1,205 @@
+/* $Id: string.h,v 1.36 2001/12/21 00:54:31 davem Exp $
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+	void *_t = (_to); \
+	__memmove(_t, (_from), (_n)); \
+	_t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	extern void __copy_1page(void *, const void *);
+
+	if(n <= 32) {
+		__builtin_memcpy(to, from, n);
+	} else if (((unsigned int) to & 7) != 0) {
+		/* Destination is not aligned on the double-word boundary */
+		__memcpy(to, from, n);
+	} else {
+		switch(n) {
+		case PAGE_SIZE:
+			__copy_1page(to, from);
+			break;
+		default:
+			__memcpy(to, from, n);
+			break;
+		}
+	}
+	return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	__memcpy(to, from, n);
+	return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+	extern void bzero_1page(void *);
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c) {
+		if(count == PAGE_SIZE)
+			bzero_1page(s);
+		else
+			__bzero(s, count);
+	} else {
+		__memset(s, c, count);
+	}
+	return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c)
+		__bzero(s, count);
+	else
+		__memset(s, c, count);
+	return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+	__memset(s, c, count);
+	return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+                            __constant_c_and_count_memset((s), (c), (count)) : \
+                            __constant_c_memset((s), (c), (count))) \
+                          : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)						\
+({										\
+	extern void *__memscan_zero(void *, size_t);				\
+	extern void *__memscan_generic(void *, int, size_t);			\
+	void *__retval, *__addr = (__arg0);					\
+	size_t __size = (__arg2);						\
+										\
+	if(__builtin_constant_p(__char) && !(__char))				\
+		__retval = __memscan_zero(__addr, __size);			\
+	else									\
+		__retval = __memscan_generic(__addr, (__char), __size);		\
+										\
+	__retval;								\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+	register int retval;
+	switch(count) {
+	case 0: return 0;
+	case 1: return (src[0] - dest[0]);
+	case 2: retval = (src[0] - dest[0]);
+		if(!retval && src[0])
+		  retval = (src[1] - dest[1]);
+		return retval;
+	case 3: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1])
+		    retval = (src[2] - dest[2]);
+		}
+		return retval;
+	case 4: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2])
+		      retval = (src[3] - dest[3]);
+		  }
+		}
+		return retval;
+	case 5: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2]) {
+		      retval = (src[3] - dest[3]);
+		      if (!retval && src[3])
+		        retval = (src[4] - dest[4]);
+		    }
+		  }
+		}
+		return retval;
+	default:
+		retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if(!retval && src[2])
+		      retval = __strncmp(src+3,dest+3,count-3);
+		  }
+		}
+		return retval;
+	}
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2)	\
+(__builtin_constant_p(__arg2) ?	\
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+ 
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h
new file mode 100644
index 000000000000..d863bfd5f09a
--- /dev/null
+++ b/include/asm-sparc/sun4paddr.h
@@ -0,0 +1,56 @@
+/* $Id: sun4paddr.h,v 1.3 1998/07/28 16:53:27 jj Exp $
+ * sun4paddr.h:  Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ * 
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR		0xf5000000
+#define SUN4_UNUSED_PHYSADDR		0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
+#define SUN4_200_ETH_PHYSADDR		0xf6000000
+#define SUN4_200_SI_PHYSADDR		0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_300_TIMER_PHYSADDR		0xef000000
+#define SUN4_300_ETH_PHYSADDR		0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_300_DMA_PHYSADDR		0xfa001000
+#define SUN4_300_ESP_PHYSADDR		0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_400_TIMER_PHYSADDR		0xef000000
+#define SUN4_400_ETH_PHYSADDR		0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_400_DMA_PHYSADDR		0xfa001000
+#define SUN4_400_ESP_PHYSADDR		0xfa000000
+
+/* 
+	these are the actual values set and used in the code. Unused items set 
+	to SUN_UNUSED_PHYSADDR 
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr;  /* system clock */
+extern int sun4_timer_physaddr;  /* timer, where applicable */
+extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr;     /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
+extern int sun4_dma_physaddr;    /* scsi dma */
+extern int sun4_esp_physaddr;    /* esp scsi */
+extern int sun4_ie_physaddr;     /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/include/asm-sparc/sun4prom.h b/include/asm-sparc/sun4prom.h
new file mode 100644
index 000000000000..9c8b4cbf629a
--- /dev/null
+++ b/include/asm-sparc/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
+ *               so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is 
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ * 
+ * Many of the function prototypes are guesses.  Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+	char		*initSP;		/* Initial system stack ptr */
+	void		(*startmon)(void);	/* Initial PC for hardware */
+	int		*diagberr;		/* Bus err handler for diags */
+	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+ 	unsigned int	*memorysize;		/* Usable memory in bytes */
+	unsigned char	(*getchar)(void);	/* Get char from input device */ 
+	void		(*putchar)(char);	/* Put char to output device */
+	int		(*mayget)(void);	/* Maybe get char, or -1 */
+	int		(*mayput)(int);		/* Maybe put char, or -1 */
+	unsigned char	*echo;			/* Should getchar echo? */
+	unsigned char	*insource;		/* Input source selector */
+	unsigned char	*outsink;		/* Output sink selector */
+	int		(*getkey)(void);	/* Get next key if one exists */
+	void		(*initgetkey)(void);	/* Initialize get key */
+	unsigned int	*translation;		/* Kbd translation selector */
+	unsigned char	*keybid;		/* Keyboard ID byte */
+	int		*screen_x;		/* V2: Screen x pos (r/o) */
+	int		*screen_y;		/* V2: Screen y pos (r/o) */
+	struct keybuf	*keybuf;		/* Up/down keycode buffer */
+	char		*monid;			/* Monitor version ID */
+	void		(*fbwritechar)(char);	/* Write a character to FB */
+	int		*fbAddr;		/* Address of frame buffer */
+	char		**font;			/* Font table for FB */
+	void		(*fbwritestr)(char *);	/* Write string to FB */
+	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
+	unsigned char	*linebuf;		/* The line input buffer */
+	unsigned char	**lineptr;		/* Cur pointer into linebuf */
+	int		*linesize;		/* length of line in linebuf */
+	void		(*getline)(char *);	/* Get line from user */
+	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
+	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
+	int		*fbthere;		/* =1 if frame buffer there */
+	int		(*getnum)(void);	/* Grab hex num from line */
+	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
+	void		(*printhex)(int);	/* Format N digits in hex */
+	unsigned char	*leds;			/* RAM copy of LED register */
+	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
+	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
+	void		(*abortentry)(void);	/* Entry for keyboard abort */
+	int		*nmiclock;		/* Counts up in msec */
+	int		*FBtype;		/* Frame buffer type */
+ 	unsigned int	romvecversion;		/* Version number for this romvec */
+	struct globram  *globram;		/* monitor global variables ??? */
+	void *		kbdaddr;		/* Addr of keyboard in use */
+	int		*keyrinit;		/* ms before kbd repeat */
+	unsigned char	*keyrtick; 		/* ms between repetitions */
+	unsigned int	*memoryavail;		/* V1: Main mem usable size */
+	long		*resetaddr;		/* where to jump on a reset */
+	long		*resetmap;		/* pgmap entry for resetaddr */
+	void		(*exittomon)(void);	/* Exit from user program */
+	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
+	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
+	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
+	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
+	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
+	int		unused1;
+	int		unused2;
+	int		unused3;
+	int		unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
new file mode 100644
index 000000000000..568db79b730d
--- /dev/null
+++ b/include/asm-sparc/sunbpp.h
@@ -0,0 +1,80 @@
+/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $
+ * include/asm-sparc/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/svr4.h b/include/asm-sparc/svr4.h
new file mode 100644
index 000000000000..da1f1c980e2d
--- /dev/null
+++ b/include/asm-sparc/svr4.h
@@ -0,0 +1,119 @@
+/* Solaris/SPARC constants and definitions -- 
+ * (C) 1996 Miguel de Icaza
+ *
+ * This file is not meant to be included by user level applications
+ * but the solaris syscall emulator
+ */
+
+#ifndef _SPARC_SVR4_H
+#define _SPARC_SVR4_H
+
+/* Signals as used by svr4 */
+typedef struct {                /* signal set type */
+	ulong sigbits[4];
+} svr4_sigset_t;
+
+/* Values for siginfo.code */
+#define SVR4_SINOINFO 32767
+/* Siginfo, sucker expects bunch of information on those parameters */
+typedef union {
+	char total_size [128];
+	struct {
+		int signo;
+		int code;
+		int error;
+		union {
+		} data; 
+	} siginfo;
+} svr4_siginfo_t;
+
+/* Context definition */
+
+/* Location of the user stored registers into a greg_t */
+enum {
+	SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y,
+	SVR4_G1,  SVR4_G2, SVR4_G3,  SVR4_G4,
+	SVR4_G5,  SVR4_G6, SVR4_G7,  SVR4_O0,
+	SVR4_O1,  SVR4_O2, SVR4_O3,  SVR4_O4,
+	SVR4_O5,  SVR4_O6, SVR4_O7
+};
+
+/* sizeof (regs) / sizeof (greg_t), defined in the ABI */
+#define SVR4_NREGS  19
+#define SVR4_MAXWIN 31
+
+typedef struct {
+	uint rwin_lo[8];
+	uint rwin_in[8];
+} svr4_rwindow_t;
+
+typedef struct {
+	int            count;
+	int            __user *winptr [SVR4_MAXWIN]; /* pointer to the windows */
+	svr4_rwindow_t win[SVR4_MAXWIN];      /* the windows */
+} svr4_gwindows_t;
+
+typedef int svr4_gregset_t[SVR4_NREGS];
+
+typedef struct {
+	double   fpu_regs[32];
+	void     *fp_q;
+	unsigned fp_fsr;
+	u_char   fp_nqel;
+	u_char   fp_nqsize;
+	u_char   inuse;		/* if fpu is in use */
+} svr4_fregset_t;
+
+typedef struct {
+	uint    id;		/* if this holds "xrs" string => ptr is valid */
+	caddr_t ptr;
+} svr4_xrs_t;
+
+/* Machine dependent context */
+typedef struct {
+	svr4_gregset_t   greg;	/* registers 0..19 (see top) */
+	svr4_gwindows_t  __user *gwin;	/* may point to register windows */
+	svr4_fregset_t   freg;	/* floating point registers */
+	svr4_xrs_t       xrs;	/* mhm? */
+	long             pad[19];
+} svr4_mcontext_t;
+
+/* flags for stack_t.flags */
+enum svr4_stack_flags {
+	SVR4_SS_ONSTACK,
+	SVR4_SS_DISABLE,
+};
+
+/* signal stack exection place, unsupported */
+typedef struct svr4_stack_t {
+        char __user *sp;
+        int  size;
+        int  flags;
+} svr4_stack_t;
+
+/* Context used by getcontext and setcontext */
+typedef struct svr4_ucontext_t {
+	u_long               flags; /* context flags, indicate what is loaded */
+	struct svr4_ucontext *link;
+	svr4_sigset_t        sigmask;
+	svr4_stack_t         stack;
+	svr4_mcontext_t      mcontext;
+	long                 pad[23];
+} svr4_ucontext_t;                          
+
+/* windows hold the windows as they were at signal time,
+ * ucontext->mcontext holds a pointer to them.
+ * addresses for uc and si are passed as parameters to svr4 signal
+ * handler
+ */
+
+/* This is the signal frame that is passed to the signal handler */
+typedef struct {
+	svr4_gwindows_t gw;	/* windows */
+	svr4_ucontext_t uc;	/* machine context */
+	svr4_siginfo_t  si;	/* siginfo */
+} svr4_signal_frame_t;
+
+#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7)))
+
+#endif /* include control */
diff --git a/include/asm-sparc/swift.h b/include/asm-sparc/swift.h
new file mode 100644
index 000000000000..e535061bf755
--- /dev/null
+++ b/include/asm-sparc/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ *          MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
+#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
+
+/* Branch folding (buggy, disable on production systems!)  */
+#define SWIFT_BF       0x00200000
+#define SWIFT_PMC      0x00180000   /* Page mode control   */
+#define SWIFT_PE       0x00040000   /* Parity enable       */
+#define SWIFT_PC       0x00020000   /* Parity control      */
+#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM       0x00004000   /* Boot mode */
+#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
+#define SWIFT_IE       0x00000200   /* Instruction cache enable */
+#define SWIFT_DE       0x00000100   /* Data cache enable */
+#define SWIFT_SA       0x00000080   /* Store Allocate */
+#define SWIFT_NF       0x00000002   /* No fault mode */
+#define SWIFT_EN       0x00000001   /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10)
+		swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x4000; addr += 0x20)
+		swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10) {
+		swift_inv_insn_tag(addr<<1);
+		swift_inv_data_tag(addr);
+	}
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+			     : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+			     : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+			     : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_CTX)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h
new file mode 100644
index 000000000000..692fa6f2296a
--- /dev/null
+++ b/include/asm-sparc/sysen.h
@@ -0,0 +1,15 @@
+/* $Id: sysen.h,v 1.3 1995/11/25 02:32:58 davem Exp $
+ * sysen.h:  Bit fields within the "System Enable" register accessed via
+ *           the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA   0x20   /* enable dvma transfers */
+#define SENABLE_CACHE  0x10   /* enable VAC cache */
+#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
new file mode 100644
index 000000000000..80cf20cfaee1
--- /dev/null
+++ b/include/asm-sparc/system.h
@@ -0,0 +1,262 @@
+/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
+#include <linux/config.h>
+
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/threads.h>	/* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static __inline__ int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+		   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+	do {			\
+	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+		put_psr(get_psr() | PSR_EF); \
+		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+		(prv)->thread.kregs->psr &= ~PSR_EF; \
+	} \
+	} while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)	/* */
+#else
+#define SWITCH_ENTER(prv)		/* */
+#define SWITCH_DO_LAZY_FPU(nxt)	\
+	do {			\
+	if (last_task_used_math != (nxt))		\
+		(nxt)->thread.kregs->psr&=~PSR_EF;	\
+	} while(0)
+#endif
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(rq, next) do { \
+	__asm__ __volatile__( \
+	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp\n\t" \
+	"restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+#define finish_arch_switch(rq, next)	spin_unlock_irq(&(rq)->lock)
+#define task_running(rq, p)		((rq)->curr == (p))
+
+	/* Much care has gone into this code, do not touch it.
+	 *
+	 * We need to loadup regs l0/l1 for the newly forked child
+	 * case because the trap return path relies on those registers
+	 * holding certain values, gcc is told that they are clobbered.
+	 * Gcc needs registers for 3 values in and 1 value out, so we
+	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+	 *
+	 * Hey Dave, that do not touch sign is too much of an incentive
+	 * - Anton & Pete
+	 */
+#define switch_to(prev, next, last) do {						\
+	SWITCH_ENTER(prev);								\
+	SWITCH_DO_LAZY_FPU(next);							\
+	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
+	__asm__ __volatile__(								\
+	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
+	"mov	%%g6, %%g3\n\t"								\
+	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
+	"rd	%%psr, %%g4\n\t"							\
+	"std	%%sp, [%%g6 + %4]\n\t"							\
+	"rd	%%wim, %%g5\n\t"							\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"std	%%g4, [%%g6 + %3]\n\t"							\
+	"ldd	[%2 + %3], %%g4\n\t"							\
+	"mov	%2, %%g6\n\t"								\
+	".globl	patchme_store_new_current\n"						\
+"patchme_store_new_current:\n\t"							\
+	"st	%2, [%1]\n\t"								\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
+	"ldd	[%%g6 + %4], %%sp\n\t"							\
+	"wr	%%g5, 0x0, %%wim\n\t"							\
+	"ldd	[%%sp + 0x00], %%l0\n\t"						\
+	"ldd	[%%sp + 0x38], %%i6\n\t"						\
+	"wr	%%g4, 0x0, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
+	" ld	[%%g3 + %5], %0\n\t"							\
+	"here:\n"									\
+        : "=&r" (last)									\
+        : "r" (&(current_set[hard_smp_processor_id()])),	\
+	  "r" ((next)->thread_info),				\
+	  "i" (TI_KPSR),					\
+	  "i" (TI_KSP),						\
+	  "i" (TI_TASK)						\
+	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
+	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
+	  "i0", "i1", "i2", "i3", "i4", "i5",			\
+	  "o0", "o1", "o2", "o3",                   "o7");	\
+	} while(0)
+
+/*
+ * Changing the IRQ level on the Sparc.
+ */
+extern void local_irq_restore(unsigned long);
+extern unsigned long __local_irq_save(void);
+extern void local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd	%%psr, %0" : "=r" (retval));
+	return retval;
+}
+
+#define local_save_flags(flags)	((flags) = getipl())
+#define local_irq_save(flags)	((flags) = __local_irq_save())
+#define local_irq_disable()	((void) __local_irq_save())
+#define irqs_disabled()		((getipl() & PSR_PIL) != 0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()	__asm__ __volatile__ ("" : : : "memory")
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define set_wmb(__var, __value) set_mb(__var, __value)
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+extern __inline__ unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+	__asm__ __volatile__("swap [%2], %0"
+			     : "=&r" (val)
+			     : "0" (val), "r" (m)
+			     : "memory");
+	return val;
+#else
+	register unsigned long *ptr asm("g1");
+	register unsigned long ret asm("g2");
+
+	ptr = (unsigned long *) m;
+	ret = val;
+
+	/* Note: this is magic and the nop there is
+	   really needed. */
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___f____xchg32\n\t"
+	" nop\n\t"
+	: "=&r" (ret)
+	: "0" (ret), "r" (ptr)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h
new file mode 100644
index 000000000000..1794d71134b7
--- /dev/null
+++ b/include/asm-sparc/termbits.h
@@ -0,0 +1,234 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned long   tcflag_t;
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#define NCCS 17
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0x00000001
+#define BRKINT	0x00000002
+#define IGNPAR	0x00000004
+#define PARMRK	0x00000008
+#define INPCK	0x00000010
+#define ISTRIP	0x00000020
+#define INLCR	0x00000040
+#define IGNCR	0x00000080
+#define ICRNL	0x00000100
+#define IUCLC	0x00000200
+#define IXON	0x00000400
+#define IXANY	0x00000800
+#define IXOFF	0x00001000
+#define IMAXBEL	0x00002000
+#define IUTF8   0x00004000
+
+/* c_oflag bits */
+#define OPOST	0x00000001
+#define OLCUC	0x00000002
+#define ONLCR	0x00000004
+#define OCRNL	0x00000008
+#define ONOCR	0x00000010
+#define ONLRET	0x00000020
+#define OFILL	0x00000040
+#define OFDEL	0x00000080
+#define NLDLY	0x00000100
+#define   NL0	0x00000000
+#define   NL1	0x00000100
+#define CRDLY	0x00000600
+#define   CR0	0x00000000
+#define   CR1	0x00000200
+#define   CR2	0x00000400
+#define   CR3	0x00000600
+#define TABDLY	0x00001800
+#define   TAB0	0x00000000
+#define   TAB1	0x00000800
+#define   TAB2	0x00001000
+#define   TAB3	0x00001800
+#define   XTABS	0x00001800
+#define BSDLY	0x00002000
+#define   BS0	0x00000000
+#define   BS1	0x00002000
+#define VTDLY	0x00004000
+#define   VT0	0x00000000
+#define   VT1	0x00004000
+#define FFDLY	0x00008000
+#define   FF0	0x00000000
+#define   FF1	0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD	  0x0000100f
+#define  B0	  0x00000000   /* hang up */
+#define  B50	  0x00000001
+#define  B75	  0x00000002
+#define  B110	  0x00000003
+#define  B134	  0x00000004
+#define  B150	  0x00000005
+#define  B200	  0x00000006
+#define  B300	  0x00000007
+#define  B600	  0x00000008
+#define  B1200	  0x00000009
+#define  B1800	  0x0000000a
+#define  B2400	  0x0000000b
+#define  B4800	  0x0000000c
+#define  B9600	  0x0000000d
+#define  B19200	  0x0000000e
+#define  B38400	  0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5	  0x00000000
+#define   CS6	  0x00000010
+#define   CS7	  0x00000020
+#define   CS8	  0x00000030
+#define CSTOPB	  0x00000040
+#define CREAD	  0x00000080
+#define PARENB	  0x00000100
+#define PARODD	  0x00000200
+#define HUPCL	  0x00000400
+#define CLOCAL	  0x00000800
+#define CBAUDEX   0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
+#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS	  0x80000000  /* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000001
+#define ICANON	0x00000002
+#define XCASE	0x00000004
+#define ECHO	0x00000008
+#define ECHOE	0x00000010
+#define ECHOK	0x00000020
+#define ECHONL	0x00000040
+#define NOFLSH	0x00000080
+#define TOSTOP	0x00000100
+#define ECHOCTL	0x00000200
+#define ECHOPRT	0x00000400
+#define ECHOKE	0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO	0x00002000
+#define PENDIN	0x00004000
+#define IEXTEN	0x00008000
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h
new file mode 100644
index 000000000000..0a8ad4cac125
--- /dev/null
+++ b/include/asm-sparc/termios.h
@@ -0,0 +1,174 @@
+/* $Id: termios.h,v 1.32 2001/06/01 08:12:11 davem Exp $ */
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct sunos_ttysize {
+	int st_lines;   /* Lines on the terminal */
+	int st_columns; /* Columns on the terminal */
+};
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN	4
+#define _VTIME	5
+
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		eol=\0		eol2=\0		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		dsusp=^Y
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+	0; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+	if (!((termios)->c_lflag & ICANON)) { \
+		put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+		put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+	} \
+	0; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+	get_user((k)->c_iflag, &(u)->c_iflag); \
+	get_user((k)->c_oflag, &(u)->c_oflag); \
+	get_user((k)->c_cflag, &(u)->c_cflag); \
+	get_user((k)->c_lflag, &(u)->c_lflag); \
+	get_user((k)->c_line,  &(u)->c_line); \
+	copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if((k)->c_lflag & ICANON) { \
+		get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	0; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+	put_user((k)->c_iflag, &(u)->c_iflag); \
+	put_user((k)->c_oflag, &(u)->c_oflag); \
+	put_user((k)->c_cflag, &(u)->c_cflag); \
+	put_user((k)->c_lflag, &(u)->c_lflag); \
+	put_user((k)->c_line, &(u)->c_line); \
+	copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if(!((k)->c_lflag & ICANON)) { \
+		put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	0; \
+})
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h
new file mode 100644
index 000000000000..104f03c55416
--- /dev/null
+++ b/include/asm-sparc/thread_info.h
@@ -0,0 +1,153 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+	unsigned long		uwinmask;
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;
+	int			softirq_count;
+	int			hardirq_count;
+
+	/* Context switch saved kernel state. */
+	unsigned long ksp;	/* ... ksp __attribute__ ((aligned (8))); */
+	unsigned long kpc;
+	unsigned long kpsr;
+	unsigned long kwim;
+
+	/* A place to store user windows and stack pointers
+	 * when the stack needs inspection.
+	 */
+	struct reg_window	reg_window[NSWINS];	/* align for ldd! */
+	unsigned long		rwbuf_stkptrs[NSWINS];
+	unsigned long		w_saved;
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.uwinmask	=	0,			\
+	.task		=	&tsk,			\
+	.exec_domain	=	&default_exec_domain,	\
+	.flags		=	0,			\
+	.cpu		=	0,			\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE		8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK	0x00	/* uwinmask */
+#define TI_TASK		0x04
+#define TI_EXECDOMAIN	0x08	/* exec_domain */
+#define TI_FLAGS	0x0c
+#define TI_CPU		0x10
+#define TI_PREEMPT	0x14	/* preempt_count */
+#define TI_SOFTIRQ	0x18	/* softirq_count */
+#define TI_HARDIRQ	0x1c	/* hardirq_count */
+#define TI_KSP		0x20	/* ksp */
+#define TI_KPC		0x24	/* kpc (ldd'ed with kpc) */
+#define TI_KPSR		0x28	/* kpsr */
+#define TI_KWIM		0x2c	/* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW	0x30
+#define TI_RWIN_SPTRS	0x230
+#define TI_W_SAVED	0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_USEDFPU		8	/* FPU was used by this task
+					 * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
+					 * TIF_NEED_RESCHED */
+#define TIF_MEMDIE		10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
new file mode 100644
index 000000000000..b16eb739dddb
--- /dev/null
+++ b/include/asm-sparc/timer.h
@@ -0,0 +1,110 @@
+/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
+ * timer.h:  Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h>  /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one.  Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10.  There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts.  This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+  __volatile__ unsigned int cur_count10;
+  __volatile__ unsigned int timer_limit10;
+  __volatile__ unsigned int cur_count14;
+  __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR   0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L       0x80000000
+#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
+  __volatile__ unsigned int l14_cur_count;
+
+  /* This register appears to be write only and/or inaccessible
+   * on Uni-Processor sun4m machines.
+   */
+  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
+
+  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
+  __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_count;
+
+	/* Again, this appears to be write only and/or inaccessible
+	 * on uni-processor sun4m machines.
+	 */
+	volatile unsigned int l10_limit_noclear;
+
+	/* This register too, it must be magic. */
+	volatile unsigned int foobar;
+
+	volatile unsigned int cfg;     /* equals zero at boot time... */
+};
+
+extern struct sun4m_timer_regs *sun4m_timers;
+
+#define SUN4D_PRM_CNT_L       0x80000000
+#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4d_timer_regs {
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_countx;
+	volatile unsigned int l10_limit_noclear;
+	volatile unsigned int ctrl;
+	volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h
new file mode 100644
index 000000000000..71b45c90ccae
--- /dev/null
+++ b/include/asm-sparc/timex.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-sparc/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()	(0)
+
+#endif
diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h
new file mode 100644
index 000000000000..6d02d1ce53f3
--- /dev/null
+++ b/include/asm-sparc/tlb.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do {								\
+	flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do {								\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#define tlb_flush(tlb) \
+do {								\
+	flush_tlb_mm((tlb)->mm);				\
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h
new file mode 100644
index 000000000000..5643ca31ead9
--- /dev/null
+++ b/include/asm-sparc/tlbflush.h
@@ -0,0 +1,63 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs	XXX Exists?
+ *  - flush_tlb_all() flushes all processes TLBs 
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+// Thanks to Anton Blanchard, our pagetables became uncached in 2.4. Wee!
+// extern void flush_tlb_pgtables(struct mm_struct *mm,
+//     unsigned long start, unsigned long end);
+#define flush_tlb_pgtables(mm, start, end)	do{ }while(0)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm)	/* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h
new file mode 100644
index 000000000000..ee5ac9c9da28
--- /dev/null
+++ b/include/asm-sparc/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h
new file mode 100644
index 000000000000..6690ab956ea6
--- /dev/null
+++ b/include/asm-sparc/traps.h
@@ -0,0 +1,140 @@
+/* $Id: traps.h,v 1.9 1998/03/09 14:04:53 jj Exp $
+ * traps.h:  Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS  255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+	unsigned long inst_one;
+	unsigned long inst_two;
+	unsigned long inst_three;
+	unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+extern __inline__ unsigned long get_tbr(void)
+{
+	unsigned long tbr;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+	return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions.  Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to.  This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0  (0xa1480000)
+#define SPARC_RD_WIM_L3  (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT    0x1          /* Text fault */
+#define SP_TRAP_II      0x2          /* Illegal Instruction */
+#define SP_TRAP_PI      0x3          /* Privileged Instruction */
+#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
+#define SP_TRAP_WOVF    0x5          /* Window Overflow */
+#define SP_TRAP_WUNF    0x6          /* Window Underflow */
+#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
+#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
+#define SP_TRAP_DFLT    0x9          /* Data Fault */
+#define SP_TRAP_TOF     0xa          /* Tag Overflow */
+#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
+#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
+#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
+#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
+#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
+#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
+#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
+#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
+#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
+#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
+#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
+#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
+#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
+#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
+#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
+#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
+#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
+#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
+#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
+#define SP_TRAP_DACC    0x29         /* Data Access Error */
+#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
+#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
+#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
+#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
+#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN    0x83         /* Flush Windows */
+#define SP_TRAP_CWIN    0x84         /* Clean Windows */
+#define SP_TRAP_RCHK    0x85         /* Range Check */
+#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
+#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
+#define SP_TRAP_LINUX   0x90         /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL              0x00
+#define ST_BREAKPOINT           0x01
+#define ST_DIV0                 0x02
+#define ST_FLUSH_WINDOWS        0x03
+#define ST_CLEAN_WINDOWS        0x04
+#define ST_RANGE_CHECK          0x05
+#define ST_FIX_ALIGN            0x06
+#define ST_INT_OVERFLOW         0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+	 (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+	 (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+	 (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+	 (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+	 (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+			     (level == SP_TRAP_SOLARIS) || \
+			     (level == SP_TRAP_NETBSD) || \
+			     (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h
new file mode 100644
index 000000000000..887add5c466b
--- /dev/null
+++ b/include/asm-sparc/tsunami.h
@@ -0,0 +1,64 @@
+/* $Id: tsunami.h,v 1.5 1996/08/29 09:49:03 davem Exp $
+ * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
+ *
+ * SW: Enable Software Table Walks  0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable   0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable  0=off 1=on
+ * DE: Data cache Enable  0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW        0x00800000
+#define TSUNAMI_AV        0x00400000
+#define TSUNAMI_DV        0x00200000
+#define TSUNAMI_MV        0x00100000
+#define TSUNAMI_PC        0x00020000
+#define TSUNAMI_ITD       0x00010000
+#define TSUNAMI_ALC       0x00008000
+#define TSUNAMI_PE        0x00001000
+#define TSUNAMI_RCMASK    0x00000C00
+#define TSUNAMI_IENAB     0x00000200
+#define TSUNAMI_DENAB     0x00000100
+#define TSUNAMI_NF        0x00000002
+#define TSUNAMI_ME        0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h
new file mode 100644
index 000000000000..31d2350a5818
--- /dev/null
+++ b/include/asm-sparc/turbosparc.h
@@ -0,0 +1,125 @@
+/* $Id: turbosparc.h,v 1.4 1998/08/16 16:02:42 ecd Exp $
+ * turbosparc.h:  Defines specific to the TurboSparc module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE    0x00000001
+#define TURBOSPARC_NOFAULT      0x00000002
+#define TURBOSPARC_ICSNOOP	0x00000004
+#define TURBOSPARC_PSO          0x00000080
+#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
+#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
+#define TURBOSPARC_BMODE        0x00004000   
+#define TURBOSPARC_PARITYODD	0x00020000   /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE	0x00040000   /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008	 /* Secondary cache enable */
+#define TURBOSPARC_uS2	    0x00000010   /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020	 /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000	 /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20) {
+                turbosparc_inv_insn_tag(addr);
+                turbosparc_inv_data_tag(addr);
+	}
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+			     : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (regval)
+			     : "r" (0x600), "i" (ASI_M_MMUREGS));
+	return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
new file mode 100644
index 000000000000..9eabf6e61ccc
--- /dev/null
+++ b/include/asm-sparc/types.h
@@ -0,0 +1,63 @@
+/* $Id: types.h,v 1.13 2001/12/21 01:22:59 davem Exp $ */
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+
+/*
+ * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space.
+ */
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
new file mode 100644
index 000000000000..3f47889883b7
--- /dev/null
+++ b/include/asm-sparc/uaccess.h
@@ -0,0 +1,389 @@
+/* $Id: uaccess.h,v 1.24 2001/10/30 04:32:24 davem Exp $
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#include <asm/a.out.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool verify_area()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { 0 })
+#define USER_DS     ((mm_segment_t) { -1 })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.current_ds)
+#define set_fs(val)	((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr,size) ((addr) < STACK_TOP)
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_check_ret(x,addr,size,retval) ({ \
+register int __foo __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \
+case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \
+case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \
+case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \
+default: if (__put_user_bad()) return retval; break; \
+} } else return retval; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_nocheck_ret(x,addr,size,retval) ({ \
+register int __foo __asm__ ("l1"); \
+switch (size) { \
+case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \
+case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \
+case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \
+case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \
+default: if (__put_user_bad()) return retval; break; \
+} })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size " %1, %2\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\t"						\
+        ".previous\n\n\t"						\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __put_user_asm_ret(x,size,addr,ret,foo)				\
+if (__builtin_constant_p(ret) && ret == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Put user asm ret, inline. */\n"				\
+"1:\t"	"st"#size " %1, %2\n\n\t"					\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, __ret_efault\n\n\t"					\
+	".previous\n\n\t"						\
+       : "=r" (foo) : "r" (x), "m" (*__m(addr)));			\
+else									\
+__asm__ __volatile(							\
+	"/* Put user asm ret, inline. */\n"				\
+"1:\t"	"st"#size " %1, %2\n\n\t"					\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %3, %%o0\n\t"					\
+	".previous\n\n\t"						\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (foo) : "r" (x), "m" (*__m(addr)), "i" (ret))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size " %2, %1\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"clr	%1\n\t"							\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) to, n))
+		return __copy_user(to, (__force void __user *) from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) from, n))
+		return __copy_user((__force void __user *) to, from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,3\n\t"
+		".previous\n\t"
+		"mov %2, %%o1\n"
+		"1:\n\t"
+		"call __bzero\n\t"
+		" mov %1, %%o0\n\t"
+		"mov %%o0, %0\n"
+		: "=r" (ret) : "r" (addr), "r" (size) :
+		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
+		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+	return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) addr, n))
+		return __clear_user(addr, n);
+	else
+		return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+	if (__access_ok((unsigned long) src, count))
+		return __strncpy_from_user(dest, src, count);
+	else
+		return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strnlen_user(str, len);
+}
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-sparc/unaligned.h b/include/asm-sparc/unaligned.h
new file mode 100644
index 000000000000..b6f8eddd30af
--- /dev/null
+++ b/include/asm-sparc/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_UNALIGNED_H_
+#define _ASM_SPARC_UNALIGNED_H_
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
new file mode 100644
index 000000000000..d1f63caaa326
--- /dev/null
+++ b/include/asm-sparc/unistd.h
@@ -0,0 +1,518 @@
+/* $Id: unistd.h,v 1.74 2002/02/08 03:57:18 davem Exp $ */
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+/* #define __NR_time alias	 25    ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64		 63 /* Linux sparc32 Specific			   */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux sparc32 Specific			   */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux sparc32 Specific			   */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+/* #define __NR_getmsg          151    SunOS Specific                              */
+/* #define __NR_putmsg          152    SunOS Specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
+/* #define __NR_getdirentires 	156    SunOS Specific                              */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_ni_syscall	164    ENOSYS under SunOS			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+/* #define __NR_ulimit          196    Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+/* #define __NR_modify_ldt      218    Linux Specific - i386 specific, unused      */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+/* #define __NR_oldstat         232    Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_aplib              255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_sys_setaltroot	280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+
+/* WARNING: You MAY NOT add syscall numbers larger than 283, since
+ *          all of the syscall tables in the Sparc kernel are
+ *          sized to have 283 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-282 range.
+ */
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res)\
+		      : "r" (__g1) \
+		      : "o0", "cc"); \
+if (__res < -255 || __res >= 0) \
+    return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__g1) \
+		      : "cc"); \
+if (__res < -255 || __res >= 0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__g1) \
+		      : "cc"); \
+if (__res < -255 || __res >= 0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
+		      : "cc"); \
+if (__res < -255 || __res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
+		      : "cc"); \
+if (__res < -255 || __res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+register long __o4 __asm__ ("o4") = (long)(arg5); \
+__asm__ __volatile__ ("t 0x10\n\t" \
+		      "bcc 1f\n\t" \
+		      "mov %%o0, %0\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "1:\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
+		      : "cc"); \
+if (__res < -255 || __res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static __inline__ _syscall0(pid_t,setsid)
+static __inline__ _syscall3(int,write,int,fd,__const__ char *,buf,off_t,count)
+static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static __inline__ _syscall1(int,dup,int,fd)
+static __inline__ _syscall3(int,execve,__const__ char *,file,char **,argv,char **,envp)
+static __inline__ _syscall3(int,open,__const__ char *,file,int,flag,int,mode)
+static __inline__ _syscall1(int,close,int,fd)
+static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+#include <linux/linkage.h>
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				unsigned long prot, unsigned long flags,
+				unsigned long fd, unsigned long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				unsigned long prot, unsigned long flags,
+				unsigned long fd, unsigned long pgoff);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				void __user *restorer,
+				size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _SPARC_UNISTD_H */
diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h
new file mode 100644
index 000000000000..b5f1abf733d5
--- /dev/null
+++ b/include/asm-sparc/user.h
@@ -0,0 +1,60 @@
+/* $Id: user.h,v 1.5 1998/02/23 01:49:22 rth Exp $
+ * asm-sparc/user.h: Core file definitions for the Sparc.
+ *
+ * Keep in sync with reg.h.  Actually, we could get rid of this
+ * one, since we won't a.out core dump that much anyways - miguel.
+ * Copyright (C) 1995 (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+#include <asm/a.out.h>
+struct sunos_regs {
+	unsigned long psr, pc, npc, y;
+	unsigned long regs[15];
+};
+
+struct sunos_fpqueue {
+	unsigned long *addr;
+	unsigned long inst;
+};
+
+struct sunos_fp {
+	union {
+		unsigned long regs[32];
+		double reg_dbls[16];
+	} fregs;
+	unsigned long fsr;
+	unsigned long flags;
+	unsigned long extra;
+	unsigned long fpq_count;
+	struct sunos_fpqueue fpq[16];
+};
+
+struct sunos_fpu {
+	struct sunos_fp fpstatus;
+};
+
+/* The SunOS core file header layout. */
+struct user {
+	unsigned long magic;
+	unsigned long len;
+	struct sunos_regs regs;
+	struct exec uexec;
+	int           signal;
+	size_t        u_tsize; /* all of these in bytes! */
+	size_t        u_dsize;
+	size_t        u_ssize;
+	char          u_comm[17];
+	struct sunos_fpu fpu;
+	unsigned long sigcode;   /* Special sigcontext subcode, if any */
+};
+
+#define NBPG                   0x2000
+#define UPAGES                 1
+#define HOST_TEXT_START_ADDR   (u.start_code)
+#define HOST_DATA_START_ADDR   (u.uexec.a_data)
+#define HOST_STACK_END_ADDR    (- u.u_ssize * NBPG)
+#define SUNOS_CORE_MAGIC       0x080456
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h
new file mode 100644
index 000000000000..9e0172323042
--- /dev/null
+++ b/include/asm-sparc/vac-ops.h
@@ -0,0 +1,136 @@
+/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ *            VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ *  31 25  24   22     21     20     19    18 16  15   2  1  0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ *      be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * |  RESV  | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ *  31    30 29   16 15   4 3            0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID      0x01c00000
+#define S4CVACTAG_W        0x00200000
+#define S4CVACTAG_P        0x00100000
+#define S4CVACTAG_V        0x00080000
+#define S4CVACTAG_TID      0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID       0x3fff0000
+#define S4CVACVA_LINE      0x0000fff0
+#define S4CVACVA_BIL       0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem.  Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies.  So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same.  If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS     0x0001e000
+#else
+#define S4CVAC_BADBITS    0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+	 (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+	unsigned int num_bytes;     /* Size of the cache */
+	unsigned int num_lines;     /* Number of cache lines */
+	unsigned int do_hwflushes;  /* Hardware flushing available? */
+	enum { VAC_NONE, VAC_WRITE_THROUGH,
+	    VAC_WRITE_BACK } type;  /* What type of VAC? */
+	unsigned int linesize;      /* Size of each line in bytes */
+	unsigned int log2lsize;     /* log2(linesize) */
+	unsigned int on;            /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "or    %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "andn  %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h
new file mode 100644
index 000000000000..91097392c8cc
--- /dev/null
+++ b/include/asm-sparc/vaddrs.h
@@ -0,0 +1,70 @@
+/* $Id: vaddrs.h,v 1.27 2001/07/04 00:18:18 davem Exp $ */
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm-sparc/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM		0x0c000000
+
+#define SRMMU_NOCACHE_VADDR	(KERNBASE + SRMMU_MAXMEM)
+				/* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES	(1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:	nocache minimum = 256 pages
+ *			nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO	64	/* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR	0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR		0xfe000000
+#define IOBASE_END		0xfe600000
+
+#define VMALLOC_START		0xfe600000
+
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END		0xffc00000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR	0xff000000
+#define SUN4C_LOCK_END		0xffc00000
+
+#define KADB_DEBUGGER_BEGVM	0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM	0xffd00000
+#define DEBUG_FIRSTVADDR	KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR		KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM	0xffd00000
+#define LINUX_OPPROM_ENDVM	0xfff00000
+
+#define DVMA_VADDR		0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END		0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/include/asm-sparc/vfc_ioctls.h b/include/asm-sparc/vfc_ioctls.h
new file mode 100644
index 000000000000..af8b69007b22
--- /dev/null
+++ b/include/asm-sparc/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define	_LINUX_VFC_IOCTLS_H_
+
+	/* IOCTLs */
+#define VFC_IOCTL(a)          (('j' << 8) | a)
+#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
+#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
+#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
+#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
+#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
+#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
+#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
+
+	/* Options for setting the vfc attributes and status */
+#define MEMPRST		0x1	/* reset FIFO ptr. */
+#define CAPTRCMD	0x2	/* start capture and wait */
+#define DIAGMODE	0x3	/* diag mode */
+#define NORMMODE	0x4	/* normal mode */
+#define CAPTRSTR	0x5	/* start capture */
+#define CAPTRWAIT	0x6	/* wait for capture to finish */
+
+
+	/* Options for the decoder */
+#define STD_NTSC	0x1	/* NTSC mode */
+#define STD_PAL		0x2	/* PAL mode */
+#define COLOR_ON	0x3	/* force color ON */
+#define MONO		0x4	/* force color OFF */
+
+	/* Values returned by ioctl 2 */
+
+#define NO_LOCK	        1
+#define NTSC_COLOR	2
+#define NTSC_NOCOLOR    3
+#define PAL_COLOR	4
+#define PAL_NOCOLOR	5
+
+/* Not too sure what this does yet */
+	/* Options for setting Field number */
+#define ODD_FIELD	0x1
+#define EVEN_FIELD	0x0
+#define ACTIVE_ONLY     0x2
+#define NON_ACTIVE	0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+	unsigned long addr;
+	unsigned long ret;
+	unsigned long len;
+	unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h
new file mode 100644
index 000000000000..7541da71b9d6
--- /dev/null
+++ b/include/asm-sparc/viking.h
@@ -0,0 +1,253 @@
+/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
+ * viking.h:  Defines specific to the GNU/Viking MBUS module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ *                            1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs).  Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ *                            1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus.  This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all.  On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data.  Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses.  Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present.  If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle.  If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE    0x00000001
+#define VIKING_NOFAULT      0x00000002
+#define VIKING_PSO          0x00000080
+#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
+#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
+#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
+#define VIKING_MMODE        0x00000800   /* MBUS mode */
+#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
+#define VIKING_BMODE        0x00002000   
+#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
+#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
+#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
+#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
+#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
+#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "i" (ASI_M_ACTION)
+			     : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+			     : "=r" (regval)
+			     : "i" (ASI_M_ACTION));
+	return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+					      unsigned long *data)
+{
+	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+			     0x80000000;
+	unsigned long info, page;
+
+	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+			      "or %%g0, %%g2, %0\n\t"
+			      "or %%g0, %%g3, %1\n\t"
+			      : "=r" (info), "=r" (page)
+			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+			      : "g2", "g3");
+	data[0] = info;
+	data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+						   unsigned long *mxcc_cregp)
+{
+	unsigned long mreg = *mregp;
+	unsigned long mxcc_creg = *mxcc_cregp;
+
+	mreg &= ~(VIKING_PCENABLE);
+	mxcc_creg &= ~(MXCC_CTL_PARE);
+
+	__asm__ __volatile__ ("set 1f, %%g2\n\t"
+			      "andcc %%g2, 4, %%g0\n\t"
+			      "bne 2f\n\t"
+			      " nop\n"
+			      "1:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n\t"
+			      "b 1f\n\t"
+			      " nop\n\t"
+			      "nop\n"
+			      "2:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n"
+			      "1:\n\t"
+			      : /* no output */
+			      : "r" (mreg), "r" (mxcc_creg),
+			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+			        "i" (ASI_M_MXCC)
+			      : "g2", "memory", "cc");
+	*mregp = mreg;
+	*mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+	unsigned long val;
+
+	vaddr &= PAGE_MASK;
+	/* Probe all MMU entries. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	if (!val)
+		return 0;
+
+	/* Probe region. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_PGDIR_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe segment. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_REAL_PMD_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe page. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+	return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/include/asm-sparc/vuid_event.h b/include/asm-sparc/vuid_event.h
new file mode 100644
index 000000000000..7781e9f2fdd3
--- /dev/null
+++ b/include/asm-sparc/vuid_event.h
@@ -0,0 +1,41 @@
+/* SunOS Virtual User Input Device (VUID) compatibility */
+
+
+typedef struct firm_event {
+	unsigned short id;	  /* tag for this event */
+	unsigned char  pair_type; /* unused by X11 */
+        unsigned char  pair;	  /* unused by X11 */
+        int            value;	  /* VKEY_UP, VKEY_DOWN or delta */
+        struct timeval time;
+} Firm_event;
+
+enum {
+    FE_PAIR_NONE,
+    FE_PAIR_SET,
+    FE_PAIR_DELTA,
+    FE_PAIR_ABSOLUTE
+};
+
+/* VUID stream formats */
+#define VUID_NATIVE     0	/* Native byte stream format */
+#define VUID_FIRM_EVENT 1	/* send firm_event structures */
+
+/* ioctls */
+    /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */
+#define VUIDSFORMAT   _IOW('v', 1, int)
+    /* Retrieve input device byte stream format */
+#define VUIDGFORMAT   _IOR('v', 2, int)
+
+/* Possible tag values */
+/*    mouse buttons: */
+#define MS_LEFT         0x7f20
+#define MS_MIDDLE       0x7f21
+#define MS_RIGHT        0x7f22
+/*    motion: */
+#define LOC_X_DELTA     0x7f80
+#define LOC_Y_DELTA     0x7f81
+#define LOC_X_ABSOLUTE  0x7f82  /* X compat, unsupported */
+#define LOC_Y_ABSOLUTE  0x7f83  /* X compat, unsupported */
+
+#define VKEY_UP   0
+#define VKEY_DOWN 1
diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h
new file mode 100644
index 000000000000..557257eef3f9
--- /dev/null
+++ b/include/asm-sparc/winmacro.h
@@ -0,0 +1,136 @@
+/* $Id: winmacro.h,v 1.22 2000/05/09 17:40:15 davem Exp $
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg.  It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+	std	%l0, [%reg + RW_L0]; \
+	std	%l2, [%reg + RW_L2]; \
+	std	%l4, [%reg + RW_L4]; \
+	std	%l6, [%reg + RW_L6]; \
+	std	%i0, [%reg + RW_I0]; \
+	std	%i2, [%reg + RW_I2]; \
+	std	%i4, [%reg + RW_I4]; \
+	std	%i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+	ldd	[%reg + RW_L0], %l0; \
+	ldd	[%reg + RW_L2], %l2; \
+	ldd	[%reg + RW_L4], %l4; \
+	ldd	[%reg + RW_L6], %l6; \
+	ldd	[%reg + RW_I0], %i0; \
+	ldd	[%reg + RW_I2], %i2; \
+	ldd	[%reg + RW_I4], %i4; \
+	ldd	[%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+        wr      %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+        LOAD_PT_YREG(base_reg, scratch) \
+        LOAD_PT_INS(base_reg) \
+        LOAD_PT_GLOBALS(base_reg) \
+        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+        rd      %y, %scratch; \
+        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
+        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+        STORE_PT_GLOBALS(base_reg) \
+        STORE_PT_YREG(base_reg, g_scratch) \
+        STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+        ld       [%cur_reg + TI_W_SAVED], %scratch; \
+        sll      %scratch, 2, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
+        sub      %scratch, %cur_reg, %scratch; \
+        sll      %scratch, 4, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        STORE_WINDOW(scratch + TI_REG_WINDOW); \
+        sub      %scratch, %cur_reg, %scratch; \
+        srl      %scratch, 6, %scratch; \
+        add      %scratch, 1, %scratch; \
+        st       %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+        rd       %tbr, %idreg; \
+	sethi    %hi(current_set), %dest_reg; \
+        srl      %idreg, 10, %idreg; \
+	or       %dest_reg, %lo(current_set), %dest_reg; \
+	and      %idreg, 0xc, %idreg; \
+	ld       [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+	lda	 [%g0] ASI_M_VIKING_TMP1, %idreg; \
+	sethi	%hi(C_LABEL(current_set)), %dest_reg; \
+	sll	%idreg, 2, %idreg; \
+	or	%dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+	ld	[%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg) 					\
+	sethi	 %hi(___b_load_current), %idreg;			\
+	sethi    %hi(current_set), %dest_reg; 			\
+	sethi    %hi(boot_cpu_id4), %idreg; 			\
+	or       %dest_reg, %lo(current_set), %dest_reg; 	\
+	ldub	 [%idreg + %lo(boot_cpu_id4)], %idreg;		\
+	ld       [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+        sethi    %hi(current_set), %idreg; \
+        ld       [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h
new file mode 100644
index 000000000000..f34b2cfa8206
--- /dev/null
+++ b/include/asm-sparc/xor.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm-sparc/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%4 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%4 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%4 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%4 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+	.name	= "SPARC",
+	.do_2	= sparc_2,
+	.do_3	= sparc_3,
+	.do_4	= sparc_4,
+	.do_5	= sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_SPARC);		\
+	} while (0)
diff --git a/include/asm-sparc64/a.out.h b/include/asm-sparc64/a.out.h
new file mode 100644
index 000000000000..02af289e3f46
--- /dev/null
+++ b/include/asm-sparc64/a.out.h
@@ -0,0 +1,104 @@
+/* $Id: a.out.h,v 1.8 2002/02/09 19:49:31 davem Exp $ */
+#ifndef __SPARC64_A_OUT_H__
+#define __SPARC64_A_OUT_H__
+
+#define SPARC_PGSIZE    0x2000        /* Thanks to the sun4 architecture... */
+#define SEGMENT_SIZE    SPARC_PGSIZE  /* whee... */
+
+#ifndef __ASSEMBLY__
+
+struct exec {
+	unsigned char a_dynamic:1;      /* A __DYNAMIC is in this image */
+	unsigned char a_toolversion:7;
+	unsigned char a_machtype;
+	unsigned short a_info;
+	unsigned int a_text;		/* length of text, in bytes */
+	unsigned int a_data;		/* length of data, in bytes */
+	unsigned int a_bss;		/* length of bss, in bytes */
+	unsigned int a_syms;		/* length of symbol table, in bytes */
+	unsigned int a_entry;		/* where program begins */
+	unsigned int a_trsize;
+	unsigned int a_drsize;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* Where in the file does the text information begin? */
+#define N_TXTOFF(x)     (N_MAGIC(x) == ZMAGIC ? 0 : sizeof (struct exec))
+
+/* Where do the Symbols start? */
+#define N_SYMOFF(x)     (N_TXTOFF(x) + (x).a_text +   \
+                         (x).a_data + (x).a_trsize +  \
+                         (x).a_drsize)
+
+/* Where does text segment go in memory after being loaded? */
+#define N_TXTADDR(x)    (unsigned long)(((N_MAGIC(x) == ZMAGIC) &&      \
+	                 ((x).a_entry < SPARC_PGSIZE)) ?   		\
+                          0 : SPARC_PGSIZE)
+
+/* And same for the data segment.. */
+#define N_DATADDR(x) (N_MAGIC(x)==OMAGIC ?         \
+                      (N_TXTADDR(x) + (x).a_text)  \
+                       : (unsigned long)(_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc relocation types
+ */
+enum reloc_type
+{
+	RELOC_8,
+	RELOC_16,
+	RELOC_32,	/* simplest relocs */
+	RELOC_DISP8,
+	RELOC_DISP16,
+	RELOC_DISP32,	/* Disp's (pc-rel) */
+	RELOC_WDISP30,
+	RELOC_WDISP22,  /* SR word disp's */
+	RELOC_HI22,
+	RELOC_22,	/* SR 22-bit relocs */
+	RELOC_13,
+	RELOC_LO10,	/* SR 13&10-bit relocs */
+	RELOC_SFA_BASE,
+	RELOC_SFA_OFF13, /* SR S.F.A. relocs */
+	RELOC_BASE10,
+	RELOC_BASE13,
+	RELOC_BASE22,	/* base_relative pic */
+	RELOC_PC10,
+	RELOC_PC22,	/* special pc-rel pic */
+	RELOC_JMP_TBL,	/* jmp_tbl_rel in pic */
+	RELOC_SEGOFF16,	/* ShLib offset-in-seg */
+	RELOC_GLOB_DAT,
+	RELOC_JMP_SLOT,
+	RELOC_RELATIVE 	/* rtld relocs */
+};
+
+/*
+ * Format of a relocation datum.
+ */
+struct relocation_info /* used when header.a_machtype == M_SPARC */
+{
+        unsigned int    r_address;  /* relocation addr */
+        unsigned int    r_index:24; /* segment index or symbol index */
+        unsigned int    r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */
+        int             r_pad:2;    /* <unused> */
+        enum reloc_type r_type:5;   /* type of relocation to perform */
+        int             r_addend;   /* addend for relocation value */
+};
+
+#define N_RELOCATION_INFO_DECLARED 1
+
+#ifdef __KERNEL__
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? 0xf0000000 : 0x80000000000L)
+
+#endif
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_A_OUT_H__) */
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
new file mode 100644
index 000000000000..ba05bdf9a211
--- /dev/null
+++ b/include/asm-sparc64/agp.h
@@ -0,0 +1,11 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page) 
+#define unmap_page_from_agp(page) 
+#define flush_agp_mappings() 
+#define flush_agp_cache() mb()
+
+#endif
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
new file mode 100644
index 000000000000..80f0df289a66
--- /dev/null
+++ b/include/asm-sparc64/apb.h
@@ -0,0 +1,36 @@
+/* $Id: apb.h,v 1.2 1998/04/01 20:41:49 ecd Exp $
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER			0xb0
+#define APB_INT_ACK				0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
+#define APB_DMA_ASFR				0xc8
+#define APB_DMA_AFAR				0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT		0xda
+#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
+#define APB_SECONDARY_CONTROL			0xdd
+#define APB_IO_ADDRESS_MAP			0xde
+#define APB_MEM_ADDRESS_MAP			0xdf
+
+#define APB_PCI_CONTROL_LOW			0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
+
+#define APB_PCI_CONTROL_HIGH			0xe4
+#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
+
+#define APB_PIO_ASFR				0xe8
+#define APB_PIO_AFAR				0xf0
+#define APB_DIAG_REGISTER			0xf8
+
+#endif /* !(_SPARC64_APB_H) */
diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h
new file mode 100644
index 000000000000..534855660f2a
--- /dev/null
+++ b/include/asm-sparc64/asi.h
@@ -0,0 +1,145 @@
+/* $Id: asi.h,v 1.5 2001/03/29 11:47:47 davem Exp $ */
+#ifndef _SPARC64_ASI_H
+#define _SPARC64_ASI_H
+
+/* asi.h:  Address Space Identifier values for the V9.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N			0x04 /* Nucleus				*/
+#define ASI_NL			0x0c /* Nucleus, little endian		*/
+#define ASI_AIUP		0x10 /* Primary, user			*/
+#define ASI_AIUS		0x11 /* Secondary, user			*/
+#define ASI_AIUPL		0x18 /* Primary, user, little endian	*/
+#define ASI_AIUSL		0x19 /* Secondary, user, little endian	*/
+#define ASI_P			0x80 /* Primary, implicit		*/
+#define ASI_S			0x81 /* Secondary, implicit		*/
+#define ASI_PNF			0x82 /* Primary, no fault		*/
+#define ASI_SNF			0x83 /* Secondary, no fault		*/
+#define ASI_PL			0x88 /* Primary, implicit, l-endian	*/
+#define ASI_SL			0x89 /* Secondary, implicit, l-endian	*/
+#define ASI_PNFL		0x8a /* Primary, no fault, l-endian	*/
+#define ASI_SNFL		0x8b /* Secondary, no fault, l-endian	*/
+
+/* SpitFire and later extended ASIs.  The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs.
+ */
+#define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
+#define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
+#define ASI_PHYS_USE_EC_L	0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L	0x1d /* PADDR, E-bit, little endian	*/
+#define ASI_NUCLEUS_QUAD_LDD	0x24 /* Cachable, qword load		*/
+#define ASI_NUCLEUS_QUAD_LDD_L	0x2c /* Cachable, qword load, l-endian 	*/
+#define ASI_PCACHE_DATA_STATUS	0x30 /* (III) PCache data stat RAM diag	*/
+#define ASI_PCACHE_DATA		0x31 /* (III) PCache data RAM diag	*/
+#define ASI_PCACHE_TAG		0x32 /* (III) PCache tag RAM diag	*/
+#define ASI_PCACHE_SNOOP_TAG	0x33 /* (III) PCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS	0x34 /* (III+) PADDR, qword load	*/
+#define ASI_WCACHE_VALID_BITS	0x38 /* (III) WCache Valid Bits diag	*/
+#define ASI_WCACHE_DATA		0x39 /* (III) WCache data RAM diag	*/
+#define ASI_WCACHE_TAG		0x3a /* (III) WCache tag RAM diag	*/
+#define ASI_WCACHE_SNOOP_TAG	0x3b /* (III) WCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS_L	0x3c /* (III+) PADDR, qw-load, l-endian	*/
+#define ASI_SRAM_FAST_INIT	0x40 /* (III+) Fast SRAM init		*/
+#define ASI_CORE_AVAILABLE	0x41 /* (CMT) LP Available		*/
+#define ASI_CORE_ENABLE_STAT	0x41 /* (CMT) LP Enable Status		*/
+#define ASI_CORE_ENABLE		0x41 /* (CMT) LP Enable RW		*/
+#define ASI_XIR_STEERING	0x41 /* (CMT) XIR Steering RW		*/
+#define ASI_CORE_RUNNING_RW	0x41 /* (CMT) LP Running RW		*/
+#define ASI_CORE_RUNNING_W1S	0x41 /* (CMT) LP Running Write-One Set	*/
+#define ASI_CORE_RUNNING_W1C	0x41 /* (CMT) LP Running Write-One Clr	*/
+#define ASI_CORE_RUNNING_STAT	0x41 /* (CMT) LP Running Status		*/
+#define ASI_CMT_ERROR_STEERING	0x41 /* (CMT) Error Steering RW		*/
+#define ASI_DCACHE_INVALIDATE	0x42 /* (III) DCache Invalidate diag	*/
+#define ASI_DCACHE_UTAG		0x43 /* (III) DCache uTag diag		*/
+#define ASI_DCACHE_SNOOP_TAG	0x44 /* (III) DCache snoop tag RAM diag	*/
+#define ASI_LSU_CONTROL		0x45 /* Load-store control unit		*/
+#define ASI_DCU_CONTROL_REG	0x45 /* (III) DCache Unit Control reg	*/
+#define ASI_DCACHE_DATA		0x46 /* DCache data-ram diag access	*/
+#define ASI_DCACHE_TAG		0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT	0x48 /* IRQ vector dispatch status	*/
+#define ASI_INTR_RECEIVE	0x49 /* IRQ vector receive status	*/
+#define ASI_UPA_CONFIG		0x4a /* UPA config space		*/
+#define ASI_JBUS_CONFIG		0x4a /* (IIIi) JBUS Config Register	*/
+#define ASI_SAFARI_CONFIG	0x4a /* (III) Safari Config Register	*/
+#define ASI_SAFARI_ADDRESS	0x4a /* (III) Safari Address Register	*/
+#define ASI_ESTATE_ERROR_EN	0x4b /* E-cache error enable space	*/
+#define ASI_AFSR		0x4c /* Async fault status register	*/
+#define ASI_AFAR		0x4d /* Async fault address register	*/
+#define ASI_EC_TAG_DATA		0x4e /* E-cache tag/valid ram diag acc	*/
+#define ASI_IMMU		0x50 /* Insn-MMU main register space	*/
+#define ASI_IMMU_TSB_8KB_PTR	0x51 /* Insn-MMU 8KB TSB pointer reg	*/
+#define ASI_IMMU_TSB_64KB_PTR	0x52 /* Insn-MMU 64KB TSB pointer reg	*/
+#define ASI_ITLB_DATA_IN	0x54 /* Insn-MMU TLB data in reg	*/
+#define ASI_ITLB_DATA_ACCESS	0x55 /* Insn-MMU TLB data access reg	*/
+#define ASI_ITLB_TAG_READ	0x56 /* Insn-MMU TLB tag read reg	*/
+#define ASI_IMMU_DEMAP		0x57 /* Insn-MMU TLB demap		*/
+#define ASI_DMMU		0x58 /* Data-MMU main register space	*/
+#define ASI_DMMU_TSB_8KB_PTR	0x59 /* Data-MMU 8KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_64KB_PTR	0x5a /* Data-MMU 16KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_DIRECT_PTR	0x5b /* Data-MMU TSB direct pointer reg	*/
+#define ASI_DTLB_DATA_IN	0x5c /* Data-MMU TLB data in reg	*/
+#define ASI_DTLB_DATA_ACCESS	0x5d /* Data-MMU TLB data access reg	*/
+#define ASI_DTLB_TAG_READ	0x5e /* Data-MMU TLB tag read reg	*/
+#define ASI_DMMU_DEMAP		0x5f /* Data-MMU TLB demap		*/
+#define ASI_IIU_INST_TRAP	0x60 /* (III) Instruction Breakpoint	*/
+#define ASI_INTR_ID		0x63 /* (CMT) Interrupt ID register	*/
+#define ASI_CORE_ID		0x63 /* (CMT) LP ID register		*/
+#define ASI_CESR_ID		0x63 /* (CMT) CESR ID register		*/
+#define ASI_IC_INSTR		0x66 /* Insn cache instrucion ram diag	*/
+#define ASI_IC_TAG		0x67 /* Insn cache tag/valid ram diag 	*/
+#define ASI_IC_STAG		0x68 /* (III) Insn cache snoop tag ram	*/
+#define ASI_IC_PRE_DECODE	0x6e /* Insn cache pre-decode ram diag	*/
+#define ASI_IC_NEXT_FIELD	0x6f /* Insn cache next-field ram diag	*/
+#define ASI_BRPRED_ARRAY	0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP		0x70 /* Primary, user, block load/store	*/
+#define ASI_BLK_AIUS		0x71 /* Secondary, user, block ld/st	*/
+#define ASI_MCU_CTRL_REG	0x72 /* (III) Memory controller regs	*/
+#define ASI_EC_DATA		0x74 /* (III) E-cache data staging reg	*/
+#define ASI_EC_CTRL		0x75 /* (III) E-cache control reg	*/
+#define ASI_EC_W		0x76 /* E-cache diag write access	*/
+#define ASI_UDB_ERROR_W		0x77 /* External UDB error regs W	*/
+#define ASI_UDB_CONTROL_W	0x77 /* External UDB control regs W	*/
+#define ASI_INTR_W		0x77 /* IRQ vector dispatch write	*/
+#define ASI_INTR_DATAN_W	0x77 /* (III) Out irq vector data reg N	*/
+#define ASI_INTR_DISPATCH_W	0x77 /* (III) Interrupt vector dispatch	*/
+#define ASI_BLK_AIUPL		0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL		0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R		0x7e /* E-cache diag read access	*/
+#define ASI_UDBH_ERROR_R	0x7f /* External UDB error regs rd hi	*/
+#define ASI_UDBL_ERROR_R	0x7f /* External UDB error regs rd low	*/
+#define ASI_UDBH_CONTROL_R	0x7f /* External UDB control regs rd hi	*/
+#define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
+#define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
+#define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
+#define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
+#define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
+#define ASI_PST16_S		0xc3 /* Secondary, 4 16-bit, partial	*/
+#define ASI_PST32_P		0xc4 /* Primary, 2 32-bit, partial	*/
+#define ASI_PST32_S		0xc5 /* Secondary, 2 32-bit, partial	*/
+#define ASI_PST8_PL		0xc8 /* Primary, 8 8-bit, partial, L	*/
+#define ASI_PST8_SL		0xc9 /* Secondary, 8 8-bit, partial, L	*/
+#define ASI_PST16_PL		0xca /* Primary, 4 16-bit, partial, L	*/
+#define ASI_PST16_SL		0xcb /* Secondary, 4 16-bit, partial, L	*/
+#define ASI_PST32_PL		0xcc /* Primary, 2 32-bit, partial, L	*/
+#define ASI_PST32_SL		0xcd /* Secondary, 2 32-bit, partial, L	*/
+#define ASI_FL8_P		0xd0 /* Primary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL8_S		0xd1 /* Secondary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL16_P		0xd2 /* Primary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL16_S		0xd3 /* Secondary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL8_PL		0xd8 /* Primary, 1 8-bit, fpu ld/st, L	*/
+#define ASI_FL8_SL		0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL		0xda /* Primary, 1 16-bit, fpu ld/st, L	*/
+#define ASI_FL16_SL		0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P	0xe0 /* Primary, blk store commit	*/
+#define ASI_BLK_COMMIT_S	0xe1 /* Secondary, blk store commit	*/
+#define ASI_BLK_P		0xf0 /* Primary, blk ld/st		*/
+#define ASI_BLK_S		0xf1 /* Secondary, blk ld/st		*/
+#define ASI_BLK_PL		0xf8 /* Primary, blk ld/st, little	*/
+#define ASI_BLK_SL		0xf9 /* Secondary, blk ld/st, little	*/
+
+#endif /* _SPARC64_ASI_H */
diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h
new file mode 100644
index 000000000000..d80f3379669b
--- /dev/null
+++ b/include/asm-sparc64/atomic.h
@@ -0,0 +1,86 @@
+/* $Id: atomic.h,v 1.22 2001/07/11 23:56:07 davem Exp $
+ * atomic.h: Thankfully the V9 is at least reasonable for this
+ *           stuff.
+ *
+ * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __ARCH_SPARC64_ATOMIC__
+#define __ARCH_SPARC64_ATOMIC__
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v, i)	(((v)->counter) = i)
+#define atomic64_set(v, i)	(((v)->counter) = i)
+
+extern void atomic_add(int, atomic_t *);
+extern void atomic64_add(int, atomic64_t *);
+extern void atomic_sub(int, atomic_t *);
+extern void atomic64_sub(int, atomic64_t *);
+
+extern int atomic_add_ret(int, atomic_t *);
+extern int atomic64_add_ret(int, atomic64_t *);
+extern int atomic_sub_ret(int, atomic_t *);
+extern int atomic64_sub_ret(int, atomic64_t *);
+
+#define atomic_dec_return(v) atomic_sub_ret(1, v)
+#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
+
+#define atomic_inc_return(v) atomic_add_ret(1, v)
+#define atomic64_inc_return(v) atomic64_add_ret(1, v)
+
+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
+#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
+
+#define atomic_add_return(i, v) atomic_add_ret(i, v)
+#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
+#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
+
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic64_inc(v) atomic64_add(1, v)
+
+#define atomic_dec(v) atomic_sub(1, v)
+#define atomic64_dec(v) atomic64_sub(1, v)
+
+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
+#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
+
+/* Atomic operations are already serializing */
+#ifdef CONFIG_SMP
+#define smp_mb__before_atomic_dec()	membar("#StoreLoad | #LoadLoad")
+#define smp_mb__after_atomic_dec()	membar("#StoreLoad | #StoreStore")
+#define smp_mb__before_atomic_inc()	membar("#StoreLoad | #LoadLoad")
+#define smp_mb__after_atomic_inc()	membar("#StoreLoad | #StoreStore")
+#else
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+#endif
+
+#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h
new file mode 100644
index 000000000000..cf16173f521b
--- /dev/null
+++ b/include/asm-sparc64/audioio.h
@@ -0,0 +1,234 @@
+/*
+ * include/asm-sparc/audioio.h
+ *
+ * Sparc Audio Midlayer
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
+ */
+
+#ifndef _AUDIOIO_H_
+#define _AUDIOIO_H_
+
+/*
+ *	SunOS/Solaris /dev/audio interface
+ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/ioctl.h>
+#endif
+
+/*
+ * This structure contains state information for audio device IO streams.
+ */
+typedef struct audio_prinfo {
+	/*
+	 * The following values describe the audio data encoding.
+	 */
+	unsigned int sample_rate;	/* samples per second */
+	unsigned int channels;	/* number of interleaved channels */
+	unsigned int precision;	/* bit-width of each sample */
+	unsigned int encoding;	/* data encoding method */
+
+	/*
+	 * The following values control audio device configuration
+	 */
+	unsigned int gain;		/* gain level: 0 - 255 */
+	unsigned int port;		/* selected I/O port (see below) */
+	unsigned int avail_ports;	/* available I/O ports (see below) */
+	unsigned int _xxx[2];		/* Reserved for future use */
+
+	unsigned int buffer_size;	/* I/O buffer size */
+
+	/*
+	 * The following values describe driver state
+	 */
+	unsigned int samples;		/* number of samples converted */
+	unsigned int eof;		/* End Of File counter (play only) */
+
+	unsigned char	pause;		/* non-zero for pause, zero to resume */
+	unsigned char	error;		/* non-zero if overflow/underflow */
+	unsigned char	waiting;	/* non-zero if a process wants access */
+	unsigned char balance;	/* stereo channel balance */
+
+	unsigned short minordev;
+
+	/*
+	 * The following values are read-only state flags
+	 */
+	unsigned char open;		/* non-zero if open access permitted */
+	unsigned char active;		/* non-zero if I/O is active */
+} audio_prinfo_t;
+
+
+/*
+ * This structure describes the current state of the audio device.
+ */
+typedef struct audio_info {
+	/*
+	 * Per-stream information
+	 */
+	audio_prinfo_t play;	/* output status information */
+	audio_prinfo_t record;	/* input status information */
+
+	/*
+	 * Per-unit/channel information
+	 */
+	unsigned int monitor_gain;	/* input to output mix: 0 - 255 */
+	unsigned char output_muted;	/* non-zero if output is muted */
+	unsigned char _xxx[3];	/* Reserved for future use */
+	unsigned int _yyy[3];		/* Reserved for future use */
+} audio_info_t;
+
+
+/*
+ * Audio encoding types
+ */
+#define	AUDIO_ENCODING_NONE	(0)	/* no encoding assigned	  */
+#define	AUDIO_ENCODING_ULAW	(1)	/* u-law encoding	  */
+#define	AUDIO_ENCODING_ALAW	(2)	/* A-law encoding	  */
+#define	AUDIO_ENCODING_LINEAR	(3)	/* Linear PCM encoding	  */
+#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
+#define	AUDIO_ENCODING_DVI	(104)	/* DVI ADPCM		  */
+#define	AUDIO_ENCODING_LINEAR8	(105)	/* 8 bit UNSIGNED	  */
+#define	AUDIO_ENCODING_LINEARLE	(106)	/* Linear PCM LE encoding */
+
+/*
+ * These ranges apply to record, play, and monitor gain values
+ */
+#define	AUDIO_MIN_GAIN	(0)	/* minimum gain value */
+#define	AUDIO_MAX_GAIN	(255)	/* maximum gain value */
+
+/*
+ * These values apply to the balance field to adjust channel gain values
+ */
+#define	AUDIO_LEFT_BALANCE	(0)	/* left channel only	*/
+#define	AUDIO_MID_BALANCE	(32)	/* equal left/right channel */
+#define	AUDIO_RIGHT_BALANCE	(64)	/* right channel only	*/
+#define	AUDIO_BALANCE_SHIFT	(3)
+
+/*
+ * Generic minimum/maximum limits for number of channels, both modes
+ */
+#define	AUDIO_MIN_PLAY_CHANNELS	(1)
+#define	AUDIO_MAX_PLAY_CHANNELS	(4)
+#define	AUDIO_MIN_REC_CHANNELS	(1)
+#define	AUDIO_MAX_REC_CHANNELS	(4)
+
+/*
+ * Generic minimum/maximum limits for sample precision
+ */
+#define	AUDIO_MIN_PLAY_PRECISION	(8)
+#define	AUDIO_MAX_PLAY_PRECISION	(32)
+#define	AUDIO_MIN_REC_PRECISION		(8)
+#define	AUDIO_MAX_REC_PRECISION		(32)
+
+/*
+ * Define some convenient names for typical audio ports
+ */
+/*
+ * output ports (several may be enabled simultaneously)
+ */
+#define	AUDIO_SPEAKER		0x01	/* output to built-in speaker */
+#define	AUDIO_HEADPHONE		0x02	/* output to headphone jack */
+#define	AUDIO_LINE_OUT		0x04	/* output to line out	 */
+
+/*
+ * input ports (usually only one at a time)
+ */
+#define	AUDIO_MICROPHONE	0x01	/* input from microphone */
+#define	AUDIO_LINE_IN		0x02	/* input from line in	 */
+#define	AUDIO_CD		0x04	/* input from on-board CD inputs */
+#define	AUDIO_INTERNAL_CD_IN	AUDIO_CD	/* input from internal CDROM */
+#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
+
+
+/*
+ * This macro initializes an audio_info structure to 'harmless' values.
+ * Note that (~0) might not be a harmless value for a flag that was
+ * a signed int.
+ */
+#define	AUDIO_INITINFO(i)	{					\
+	unsigned int	*__x__;						\
+	for (__x__ = (unsigned int *)(i);				\
+	    (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));	\
+	    *__x__++ = ~0);						\
+}
+
+/*
+ * These allow testing for what the user wants to set 
+ */
+#define AUD_INITVALUE   (~0)
+#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
+#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
+#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
+
+/*
+ * Parameter for the AUDIO_GETDEV ioctl to determine current
+ * audio devices.
+ */
+#define	MAX_AUDIO_DEV_LEN	(16)
+typedef struct audio_device {
+	char name[MAX_AUDIO_DEV_LEN];
+	char version[MAX_AUDIO_DEV_LEN];
+	char config[MAX_AUDIO_DEV_LEN];
+} audio_device_t;
+
+
+/*
+ * Ioctl calls for the audio device.
+ */
+
+/*
+ * AUDIO_GETINFO retrieves the current state of the audio device.
+ *
+ * AUDIO_SETINFO copies all fields of the audio_info structure whose
+ * values are not set to the initialized value (-1) to the device state.
+ * It performs an implicit AUDIO_GETINFO to return the new state of the
+ * device.  Note that the record.samples and play.samples fields are set
+ * to the last value before the AUDIO_SETINFO took effect.  This allows
+ * an application to reset the counters while atomically retrieving the
+ * last value.
+ *
+ * AUDIO_DRAIN suspends the calling process until the write buffers are
+ * empty.
+ *
+ * AUDIO_GETDEV returns a structure of type audio_device_t which contains
+ * three strings.  The string "name" is a short identifying string (for
+ * example, the SBus Fcode name string), the string "version" identifies
+ * the current version of the device, and the "config" string identifies
+ * the specific configuration of the audio stream.  All fields are
+ * device-dependent -- see the device specific manual pages for details.
+ *
+ * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
+ * herein (making it not too portable)
+ *
+ * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
+ * resets error counters, and restarts recording and playback as appropriate
+ * for the current sampling mode.
+ */
+#define	AUDIO_GETINFO	_IOR('A', 1, audio_info_t)
+#define	AUDIO_SETINFO	_IOWR('A', 2, audio_info_t)
+#define	AUDIO_DRAIN	_IO('A', 3)
+#define	AUDIO_GETDEV	_IOR('A', 4, audio_device_t)
+#define	AUDIO_GETDEV_SUNOS	_IOR('A', 4, int)
+#define AUDIO_FLUSH     _IO('A', 5)
+
+/* Define possible audio hardware configurations for 
+ * old SunOS-style AUDIO_GETDEV ioctl */
+#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
+#define AUDIO_DEV_AMD           (1)     /* audioamd device */
+#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
+#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
+#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
+
+/*
+ * The following ioctl sets the audio device into an internal loopback mode,
+ * if the hardware supports this.  The argument is TRUE to set loopback,
+ * FALSE to reset to normal operation.  If the hardware does not support
+ * internal loopback, the ioctl should fail with EINVAL.
+ * Causes ADC data to be digitally mixed in and sent to the DAC.
+ */
+#define	AUDIO_DIAG_LOOPBACK	_IOW('A', 101, int)
+
+#endif /* _AUDIOIO_H_ */
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
new file mode 100644
index 000000000000..5eb01dd47150
--- /dev/null
+++ b/include/asm-sparc64/auxio.h
@@ -0,0 +1,98 @@
+/* $Id: auxio.h,v 1.3 2001/06/05 08:16:34 davem Exp $
+ * auxio.h:  Definitions and code for the Auxiliary I/O registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
+ */
+#ifndef _SPARC64_AUXIO_H
+#define _SPARC64_AUXIO_H
+
+/* AUXIO implementations:
+ * sbus-based NCR89C105 "Slavio"
+ *	LED/Floppy (AUX1) register
+ *	Power (AUX2) register
+ *
+ * ebus-based auxio on PCIO 
+ *	LED Auxio Register
+ *	Power Auxio Register
+ *
+ * Register definitions from NCR _NCR89C105 Chip Specification_
+ * 
+ * SLAVIO AUX1 @ 0x1900000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
+ * -------------------------------------------------
+ * (R) - bit 7:6,4 are reserved and should be masked in s/w
+ *  D  - Floppy Density Sense (1=high density) R/O
+ *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
+ *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
+ *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
+ *  L  - System LED on front panel (0=off, 1=on) 
+ */
+#define AUXIO_AUX1_MASK		0xc0 /* Mask bits 		*/
+#define AUXIO_AUX1_FDENS	0x20 /* Floppy Density Sense	*/
+#define AUXIO_AUX1_LTE 		0x08 /* Link Test Enable 	*/
+#define AUXIO_AUX1_MMUX		0x04 /* Monitor/Mouse Mux	*/
+#define AUXIO_AUX1_FTCNT	0x02 /* Terminal Count, 	*/
+#define AUXIO_AUX1_LED		0x01 /* System LED		*/
+
+/* SLAVIO AUX2 @ 0x1910000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
+ * -------------------------------------------------
+ * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
+ *  D  - Power Failure Detect (1=power fail)
+ *  C  - Clear Power Failure Detect Int (1=clear)
+ *  F  - Power Off (1=power off)
+ */
+#define AUXIO_AUX2_MASK		0xdc /* Mask Bits		*/
+#define AUXIO_AUX2_PFAILDET	0x20 /* Power Fail Detect	*/
+#define AUXIO_AUX2_PFAILCLR 	0x02 /* Clear Pwr Fail Det Intr	*/
+#define AUXIO_AUX2_PWR_OFF	0x01 /* Power Off		*/
+
+/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
+ *
+ * PCIO LED Auxio @ 0x726000
+ * -------------------------------------------------
+ * |             31:1 Unused                 | LED |
+ * -------------------------------------------------
+ * Bits 31:1 unused
+ * LED - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_PCIO_LED		0x01 /* System LED 		*/ 
+
+/* PCIO Power Auxio @ 0x724000
+ * -------------------------------------------------
+ * |             31:2 Unused           | CPO | SPO |
+ * -------------------------------------------------
+ * Bits 31:2 unused
+ * CPO - Courtesy Power Off (1=off)
+ * SPO - System Power Off   (1=off)
+ */
+#define AUXIO_PCIO_CPWR_OFF	0x02 /* Courtesy Power Off	*/
+#define AUXIO_PCIO_SPWR_OFF	0x01 /* System Power Off	*/
+
+#ifndef __ASSEMBLY__
+
+#define AUXIO_LTE_ON	1
+#define AUXIO_LTE_OFF	0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+extern void auxio_set_lte(int on);
+
+#define AUXIO_LED_ON	1
+#define AUXIO_LED_OFF	0
+
+/* auxio_set_led - Set system front panel LED 
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+extern void auxio_set_led(int on);
+
+#endif /* ifndef __ASSEMBLY__ */ 
+
+#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
new file mode 100644
index 000000000000..368fce4eedba
--- /dev/null
+++ b/include/asm-sparc64/bbc.h
@@ -0,0 +1,225 @@
+/* $Id: bbc.h,v 1.2 2001/03/26 23:47:18 davem Exp $
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID		0x00	/* [B] Agent ID			*/
+#define BBC_DEVP	0x01	/* [B] Device Present		*/
+#define BBC_ARB		0x02	/* [B] Arbitration		*/
+#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
+#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
+#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
+#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
+#define BBC_PSRC	0x08	/* [W] POR Source		*/
+#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
+#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
+#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
+#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
+#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
+#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
+#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
+#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
+#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
+#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
+#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
+#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
+#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
+#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
+#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
+
+#define BBC_REGS_SIZE	0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID	0x07	/* Safari ID		*/
+#define BBC_AID_RESV	0xf8	/* Reserved		*/
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
+#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
+#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
+#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
+#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV	0xf0	/* Reserved			 */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
+#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
+#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
+#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
+				 * When clear, BBC ignores watchdog signal.
+				 */
+#define BBC_WDACTION_RESV 0xfe	/* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
+#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
+#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
+#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
+#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
+			      * the entire system.
+			      */
+#define BBC_SPG_RESV	0xe0 /* Reserved			*/
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
+#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
+#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
+#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
+#define BBC_SXG_RESV	0xf0 /* Reserved			*/
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
+#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
+#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
+#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
+#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
+#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
+#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
+#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
+#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
+#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
+#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
+#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
+				* were updated.
+				*/
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+				* device
+				*/
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
+				 * a) Super I/O watchdog fired, or
+				 * b) XIR push button was activated
+				 */
+#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
+#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
+#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
+#define BBC_CSC_RESV	0x78	/* Reserved				*/
+#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
+#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
+#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
+#define BBC_ES_RESV		0xdc	/* Reserved		*/
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL	0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL	0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL	0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL	0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
+#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS	0x0007fc00
+#define BBC_KBC_BCNT_RESV	0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
new file mode 100644
index 000000000000..9d722dc8cca3
--- /dev/null
+++ b/include/asm-sparc64/bitops.h
@@ -0,0 +1,294 @@
+/* $Id: bitops.h,v 1.39 2002/01/30 01:40:00 davem Exp $
+ * bitops.h: Bit string operations on the V9.
+ *
+ * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BITOPS_H
+#define _SPARC64_BITOPS_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+extern void set_bit(unsigned long nr, volatile unsigned long *addr);
+extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern void change_bit(unsigned long nr, volatile unsigned long *addr);
+
+/* "non-atomic" versions... */
+
+static __inline__ void __set_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+
+	*m |= (1UL << (nr & 63));
+}
+
+static __inline__ void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+
+	*m &= ~(1UL << (nr & 63));
+}
+
+static __inline__ void __change_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+
+	*m ^= (1UL << (nr & 63));
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+	long old = *m;
+	long mask = (1UL << (nr & 63));
+
+	*m = (old | mask);
+	return ((old & mask) != 0);
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+	long old = *m;
+	long mask = (1UL << (nr & 63));
+
+	*m = (old & ~mask);
+	return ((old & mask) != 0);
+}
+
+static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *m = addr + (nr >> 6);
+	long old = *m;
+	long mask = (1UL << (nr & 63));
+
+	*m = (old ^ mask);
+	return ((old & mask) != 0);
+}
+
+#ifdef CONFIG_SMP
+#define smp_mb__before_clear_bit()	membar("#StoreLoad | #LoadLoad")
+#define smp_mb__after_clear_bit()	membar("#StoreLoad | #StoreStore")
+#else
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+#endif
+
+static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr)
+{
+	return (1UL & ((addr)[nr >> 6] >> (nr & 63))) != 0UL;
+}
+
+/* The easy/cheese version for now. */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	result = 0;
+	while(word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while (!(word & 1UL)) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(((unsigned int)b[1])))
+		return __ffs(b[1]) + 64;
+	if (b[1] >> 32)
+		return __ffs(b[1] >> 32) + 96;
+	return __ffs(b[2]) + 128;
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	if (!x)
+		return 0;
+	return __ffs((unsigned long)x) + 1;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#ifdef ULTRA_HAS_POPULATION_COUNT
+
+static __inline__ unsigned int hweight64(unsigned long w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
+	return res;
+}
+
+static __inline__ unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
+	return res;
+}
+
+static __inline__ unsigned int hweight16(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
+	return res;
+}
+
+static __inline__ unsigned int hweight8(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
+	return res;
+}
+
+#else
+
+#define hweight64(x) generic_hweight64(x)
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif
+#endif /* __KERNEL__ */
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+extern unsigned long find_next_bit(const unsigned long *, unsigned long,
+					unsigned long);
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+/* find_next_zero_bit() finds the first zero bit in a bit string of length
+ * 'size' bits, starting the search at bit 'offset'. This is largely based
+ * on Linus's ALPHA routines, which are pretty portable BTW.
+ */
+
+extern unsigned long find_next_zero_bit(const unsigned long *,
+					unsigned long, unsigned long);
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+
+#define test_and_set_le_bit(nr,addr)	\
+	test_and_set_bit((nr) ^ 0x38, (addr))
+#define test_and_clear_le_bit(nr,addr)	\
+	test_and_clear_bit((nr) ^ 0x38, (addr))
+
+static __inline__ int test_le_bit(int nr, __const__ unsigned long * addr)
+{
+	int			mask;
+	__const__ unsigned char	*ADDR = (__const__ unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define find_first_zero_le_bit(addr, size) \
+        find_next_zero_le_bit((addr), (size), 0)
+
+extern unsigned long find_next_zero_le_bit(unsigned long *, unsigned long, unsigned long);
+
+#ifdef __KERNEL__
+
+#define __set_le_bit(nr, addr) \
+	__set_bit((nr) ^ 0x38, (addr))
+#define __clear_le_bit(nr, addr) \
+	__clear_bit((nr) ^ 0x38, (addr))
+#define __test_and_clear_le_bit(nr, addr) \
+	__test_and_clear_bit((nr) ^ 0x38, (addr))
+#define __test_and_set_le_bit(nr, addr) \
+	__test_and_set_bit((nr) ^ 0x38, (addr))
+
+#define ext2_set_bit(nr,addr)	\
+	__test_and_set_le_bit((nr),(unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock,nr,addr) \
+	test_and_set_le_bit((nr),(unsigned long *)(addr))
+#define ext2_clear_bit(nr,addr)	\
+	__test_and_clear_le_bit((nr),(unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+	test_and_clear_le_bit((nr),(unsigned long *)(addr))
+#define ext2_test_bit(nr,addr)	\
+	test_le_bit((nr),(unsigned long *)(addr))
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long *)(addr), (size))
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_le_bit((unsigned long *)(addr), (size), (off))
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)	\
+	test_and_set_bit((nr),(unsigned long *)(addr))
+#define minix_set_bit(nr,addr)	\
+	set_bit((nr),(unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr,addr) \
+	test_and_clear_bit((nr),(unsigned long *)(addr))
+#define minix_test_bit(nr,addr)	\
+	test_bit((nr),(unsigned long *)(addr))
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_bit((unsigned long *)(addr),(size))
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/include/asm-sparc64/bpp.h b/include/asm-sparc64/bpp.h
new file mode 100644
index 000000000000..abe163a50382
--- /dev/null
+++ b/include/asm-sparc64/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC64_BPP_H
+#define _SPARC64_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *	Stephen Williams
+ *	Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATIBILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/include/asm-sparc64/bsderrno.h b/include/asm-sparc64/bsderrno.h
new file mode 100644
index 000000000000..52fe880d2af8
--- /dev/null
+++ b/include/asm-sparc64/bsderrno.h
@@ -0,0 +1,94 @@
+/* $Id: bsderrno.h,v 1.1 1996/12/26 13:25:21 davem Exp $
+ * bsderrno.h: Error numbers for NetBSD binary compatibility
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BSDERRNO_H
+#define _SPARC64_BSDERRNO_H
+
+#define BSD_EPERM         1      /* Operation not permitted */
+#define BSD_ENOENT        2      /* No such file or directory */
+#define BSD_ESRCH         3      /* No such process */
+#define BSD_EINTR         4      /* Interrupted system call */
+#define BSD_EIO           5      /* Input/output error */
+#define BSD_ENXIO         6      /* Device not configured */
+#define BSD_E2BIG         7      /* Argument list too long */
+#define BSD_ENOEXEC       8      /* Exec format error */
+#define BSD_EBADF         9      /* Bad file descriptor */
+#define BSD_ECHILD        10     /* No child processes */
+#define BSD_EDEADLK       11     /* Resource deadlock avoided */
+#define BSD_ENOMEM        12     /* Cannot allocate memory */
+#define BSD_EACCES        13     /* Permission denied */
+#define BSD_EFAULT        14     /* Bad address */
+#define BSD_ENOTBLK       15     /* Block device required */
+#define BSD_EBUSY         16     /* Device busy */
+#define BSD_EEXIST        17     /* File exists */
+#define BSD_EXDEV         18     /* Cross-device link */
+#define BSD_ENODEV        19     /* Operation not supported by device */
+#define BSD_ENOTDIR       20     /* Not a directory */
+#define BSD_EISDIR        21     /* Is a directory */
+#define BSD_EINVAL        22     /* Invalid argument */
+#define BSD_ENFILE        23     /* Too many open files in system */
+#define BSD_EMFILE        24     /* Too many open files */
+#define BSD_ENOTTY        25     /* Inappropriate ioctl for device */
+#define BSD_ETXTBSY       26     /* Text file busy */
+#define BSD_EFBIG         27     /* File too large */
+#define BSD_ENOSPC        28     /* No space left on device */
+#define BSD_ESPIPE        29     /* Illegal seek */
+#define BSD_EROFS         30     /* Read-only file system */
+#define BSD_EMLINK        31     /* Too many links */
+#define BSD_EPIPE         32     /* Broken pipe */
+#define BSD_EDOM          33     /* Numerical argument out of domain */
+#define BSD_ERANGE        34     /* Result too large */
+#define BSD_EAGAIN        35     /* Resource temporarily unavailable */
+#define BSD_EWOULDBLOCK   EAGAIN /* Operation would block */
+#define BSD_EINPROGRESS   36     /* Operation now in progress */
+#define BSD_EALREADY      37     /* Operation already in progress */
+#define BSD_ENOTSOCK      38     /* Socket operation on non-socket */
+#define BSD_EDESTADDRREQ  39     /* Destination address required */
+#define BSD_EMSGSIZE      40     /* Message too long */
+#define BSD_EPROTOTYPE    41     /* Protocol wrong type for socket */
+#define BSD_ENOPROTOOPT   42     /* Protocol not available */
+#define BSD_EPROTONOSUPPORT  43  /* Protocol not supported */
+#define BSD_ESOCKTNOSUPPORT  44  /* Socket type not supported */
+#define BSD_EOPNOTSUPP    45     /* Operation not supported */
+#define BSD_EPFNOSUPPORT  46     /* Protocol family not supported */
+#define BSD_EAFNOSUPPORT  47     /* Address family not supported by protocol family */
+#define BSD_EADDRINUSE    48     /* Address already in use */
+#define BSD_EADDRNOTAVAIL 49     /* Can't assign requested address */
+#define BSD_ENETDOWN      50     /* Network is down */
+#define BSD_ENETUNREACH   51     /* Network is unreachable */
+#define BSD_ENETRESET     52     /* Network dropped connection on reset */
+#define BSD_ECONNABORTED  53     /* Software caused connection abort */
+#define BSD_ECONNRESET    54     /* Connection reset by peer */
+#define BSD_ENOBUFS       55     /* No buffer space available */
+#define BSD_EISCONN       56     /* Socket is already connected */
+#define BSD_ENOTCONN      57     /* Socket is not connected */
+#define BSD_ESHUTDOWN     58     /* Can't send after socket shutdown */
+#define BSD_ETOOMANYREFS  59     /* Too many references: can't splice */
+#define BSD_ETIMEDOUT     60     /* Operation timed out */
+#define BSD_ECONNREFUSED  61     /* Connection refused */
+#define BSD_ELOOP         62     /* Too many levels of symbolic links */
+#define BSD_ENAMETOOLONG  63     /* File name too long */
+#define BSD_EHOSTDOWN     64     /* Host is down */
+#define BSD_EHOSTUNREACH  65     /* No route to host */
+#define BSD_ENOTEMPTY     66     /* Directory not empty */
+#define BSD_EPROCLIM      67     /* Too many processes */
+#define BSD_EUSERS        68     /* Too many users */
+#define BSD_EDQUOT        69     /* Disc quota exceeded */
+#define BSD_ESTALE        70     /* Stale NFS file handle */
+#define BSD_EREMOTE       71     /* Too many levels of remote in path */
+#define BSD_EBADRPC       72     /* RPC struct is bad */
+#define BSD_ERPCMISMATCH  73     /* RPC version wrong */
+#define BSD_EPROGUNAVAIL  74     /* RPC prog. not avail */
+#define BSD_EPROGMISMATCH 75     /* Program version wrong */
+#define BSD_EPROCUNAVAIL  76     /* Bad procedure for program */
+#define BSD_ENOLCK        77     /* No locks available */
+#define BSD_ENOSYS        78     /* Function not implemented */
+#define BSD_EFTYPE        79     /* Inappropriate file type or format */
+#define BSD_EAUTH         80     /* Authentication error */
+#define BSD_ENEEDAUTH     81     /* Need authenticator */
+#define BSD_ELAST         81     /* Must be equal largest errno */
+
+#endif /* !(_SPARC64_BSDERRNO_H) */
diff --git a/include/asm-sparc64/bug.h b/include/asm-sparc64/bug.h
new file mode 100644
index 000000000000..25c5b1dfe378
--- /dev/null
+++ b/include/asm-sparc64/bug.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_BUG_H
+#define _SPARC64_BUG_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {					\
+	do_BUG(__FILE__, __LINE__);			\
+	__builtin_trap();				\
+} while (0)
+#else
+#define BUG()		__builtin_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-sparc64/bugs.h b/include/asm-sparc64/bugs.h
new file mode 100644
index 000000000000..360dd04ed8e4
--- /dev/null
+++ b/include/asm-sparc64/bugs.h
@@ -0,0 +1,16 @@
+/*  $Id: bugs.h,v 1.1 1996/12/26 13:25:20 davem Exp $
+ *  include/asm-sparc64/bugs.h:  Sparc probes for various bugs.
+ *
+ *  Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/config.h>
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#ifndef CONFIG_SMP
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+}
diff --git a/include/asm-sparc64/byteorder.h b/include/asm-sparc64/byteorder.h
new file mode 100644
index 000000000000..c69b08af5fe0
--- /dev/null
+++ b/include/asm-sparc64/byteorder.h
@@ -0,0 +1,50 @@
+/* $Id: byteorder.h,v 1.8 1997/12/18 02:44:14 ecd Exp $ */
+#ifndef _SPARC64_BYTEORDER_H
+#define _SPARC64_BYTEORDER_H
+
+#include <asm/types.h>
+#include <asm/asi.h>
+
+#ifdef __GNUC__
+
+static __inline__ __u16 ___arch__swab16p(const __u16 *addr)
+{
+	__u16 ret;
+
+	__asm__ __volatile__ ("lduha [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static __inline__ __u32 ___arch__swab32p(const __u32 *addr)
+{
+	__u32 ret;
+
+	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static __inline__ __u64 ___arch__swab64p(const __u64 *addr)
+{
+	__u64 ret;
+
+	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC64_BYTEORDER_H */
diff --git a/include/asm-sparc64/cache.h b/include/asm-sparc64/cache.h
new file mode 100644
index 000000000000..ade5ec3bfd5a
--- /dev/null
+++ b/include/asm-sparc64/cache.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-sparc64/cache.h
+ */
+#ifndef __ARCH_SPARC64_CACHE_H
+#define __ARCH_SPARC64_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_SHIFT	5
+#define        L1_CACHE_BYTES	32 /* Two 16-byte sub-blocks per line. */
+
+#define        L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define		L1_CACHE_SHIFT_MAX 5	/* largest L1 which this arch supports */
+
+#define        SMP_CACHE_BYTES_SHIFT	6
+#define        SMP_CACHE_BYTES		(1 << SMP_CACHE_BYTES_SHIFT) /* L2 cache line size. */
+
+#endif
diff --git a/include/asm-sparc64/cacheflush.h b/include/asm-sparc64/cacheflush.h
new file mode 100644
index 000000000000..86f02937ff1b
--- /dev/null
+++ b/include/asm-sparc64/cacheflush.h
@@ -0,0 +1,72 @@
+#ifndef _SPARC64_CACHEFLUSH_H
+#define _SPARC64_CACHEFLUSH_H
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+/* Flushing for D-cache alias handling is only needed if
+ * the page size is smaller than 16K.
+ */
+#if PAGE_SHIFT < 14
+#define DCACHE_ALIASING_POSSIBLE
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+/* Cache flush operations. */
+
+/* These are the same regardless of whether this is an SMP kernel or not. */
+#define flush_cache_mm(__mm) \
+	do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_range(vma, start, end) \
+	flush_cache_mm((vma)->vm_mm)
+#define flush_cache_page(vma, page, pfn) \
+	flush_cache_mm((vma)->vm_mm)
+
+/* 
+ * On spitfire, the icache doesn't snoop local stores and we don't
+ * use block commit stores (which invalidate icache lines) during
+ * module load, so we need this.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_icache_page(unsigned long);
+
+extern void __flush_dcache_page(void *addr, int flush_icache);
+extern void flush_dcache_page_impl(struct page *page);
+#ifdef CONFIG_SMP
+extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
+extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
+#else
+#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
+#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
+#endif
+
+extern void __flush_dcache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+
+#define flush_icache_page(vma, pg)	do { } while(0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
new file mode 100644
index 000000000000..fd1688335ace
--- /dev/null
+++ b/include/asm-sparc64/chafsr.h
@@ -0,0 +1,242 @@
+/* $Id: chafsr.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch	-->	cheetah
+ * ch+	-->	cheetah plus
+ * jp	-->	jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO		(1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE		(1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP		(1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM		(1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS		(1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE		(1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE		(1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP		(1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP		(1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC		(1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU		(1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+				 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT	24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT	22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT	16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT	9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT	0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */
diff --git a/include/asm-sparc64/checksum.h b/include/asm-sparc64/checksum.h
new file mode 100644
index 000000000000..dc8bed246fc9
--- /dev/null
+++ b/include/asm-sparc64/checksum.h
@@ -0,0 +1,173 @@
+/* $Id: checksum.h,v 1.19 2002/02/09 19:49:31 davem Exp $ */
+#ifndef __SPARC64_CHECKSUM_H
+#define __SPARC64_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/* the same as csum_partial, but copies from user space while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+					      unsigned char *dst,
+					      int len, unsigned int sum);
+
+extern long __csum_partial_copy_from_user(const unsigned char __user *src,
+					  unsigned char *dst, int len,
+					  unsigned int sum);
+
+static inline unsigned int
+csum_partial_copy_from_user(const unsigned char __user *src,
+			    unsigned char *dst, int len,
+			    unsigned int sum, int *err)
+{
+	long ret = __csum_partial_copy_from_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (unsigned int) ret;
+}
+
+/* 
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern long __csum_partial_copy_to_user(const unsigned char *src,
+					unsigned char __user *dst, int len,
+					  unsigned int sum);
+
+static inline unsigned int
+csum_and_copy_to_user(const unsigned char *src,
+		      unsigned char __user *dst, int len,
+		      unsigned int sum, int *err)
+{
+	long ret = __csum_partial_copy_to_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (unsigned int) ret;
+}
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+extern unsigned short ip_fast_csum(__const__ unsigned char *iph,
+				   unsigned int ihl);
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline unsigned short csum_fold(unsigned int sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(
+"	addcc		%0, %1, %1\n"
+"	srl		%1, 16, %1\n"
+"	addc		%1, %%g0, %1\n"
+"	xnor		%%g0, %1, %0\n"
+	: "=&r" (sum), "=r" (tmp)
+	: "0" (sum), "1" (sum<<16)
+	: "cc");
+	return (sum & 0xffff);
+}
+
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+					       unsigned long daddr,
+					       unsigned int len,
+					       unsigned short proto,
+					       unsigned int sum)
+{
+	__asm__ __volatile__(
+"	addcc		%1, %0, %0\n"
+"	addccc		%2, %0, %0\n"
+"	addccc		%3, %0, %0\n"
+"	addc		%0, %%g0, %0\n"
+	: "=r" (sum), "=r" (saddr)
+	: "r" (daddr), "r" ((proto<<16)+len), "0" (sum), "1" (saddr)
+	: "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
+						   unsigned long daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   unsigned int sum) 
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						 struct in6_addr *daddr,
+						 __u32 len,
+						 unsigned short proto,
+						 unsigned int sum) 
+{
+	__asm__ __volatile__ (
+"	addcc		%3, %4, %%g7\n"
+"	addccc		%5, %%g7, %%g7\n"
+"	lduw		[%2 + 0x0c], %%g2\n"
+"	lduw		[%2 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%2 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%2 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x0c], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	addccc		%%g3, %%g7, %0\n"
+"	addc		0, %0, %0\n"
+	: "=&r" (sum)
+	: "r" (saddr), "r" (daddr), "r"(htonl(len)),
+	  "r"(htonl(proto)), "r"(sum)
+	: "g2", "g3", "g7", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
new file mode 100644
index 000000000000..53047f9f6423
--- /dev/null
+++ b/include/asm-sparc64/chmctrl.h
@@ -0,0 +1,184 @@
+/* $Id: chmctrl.h,v 1.1 2001/03/29 11:43:28 davem Exp $ */
+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
+#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
+#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
+#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
+#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
+#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
+#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
+#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
+#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R		0x0100000000000000UL
+#define TCTRL1_R_SHIFT 		      56
+#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT		0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT	      44
+#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT	      38
+#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT	      20
+#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT	      14
+#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT		0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT	      3
+#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT	      1
+#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R		0x0000000000008000UL
+#define TCTRL2_R_SHIFT		      15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R		0x0100000000000000UL
+#define TCTRL3_R_SHIFT		      56
+#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT		0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT	      44
+#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT	      38
+#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT		0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT	      3
+#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R		0x0000000000008000UL
+#define TCTRL4_R_SHIFT		      15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT	      63
+#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT	      41
+#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT	      20
+#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT	      14
+#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS		0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT	26
+#define PA_LOWER_BITS		0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT	6
+
+#define MACTRL_R0		         0x8000000000000000UL
+#define MACTRL_R0_SHIFT		         63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT		 60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT		 56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */
diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h
new file mode 100644
index 000000000000..870db5928577
--- /dev/null
+++ b/include/asm-sparc64/cmt.h
@@ -0,0 +1,59 @@
+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID		0x0000000000000010UL
+#define  LP_ID_MAX	0x00000000003f0000UL
+#define  LP_ID_ID	0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID	0x0000000000000000UL
+#define  LP_INTR_ID_ID	0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID		0x0000000000000040UL
+#define  CESR_ID_ID	0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL	0x0000000000000000UL
+#define  LP_AVAIL_1	0x0000000000000002UL
+#define  LP_AVAIL_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT	0x0000000000000010UL
+#define  LP_ENAB_STAT_1	0x0000000000000002UL
+#define  LP_ENAB_STAT_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB		0x0000000000000020UL
+#define  LP_ENAB_1	0x0000000000000002UL
+#define  LP_ENAB_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW	0x0000000000000050UL
+#define LP_RUNNING_W1S	0x0000000000000060UL
+#define LP_RUNNING_W1C	0x0000000000000068UL
+#define  LP_RUNNING_1	0x0000000000000002UL
+#define  LP_RUNNING_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT	0x0000000000000058UL
+#define  LP_RUN_STAT_1	0x0000000000000002UL
+#define  LP_RUN_STAT_0	0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER	0x0000000000000030UL
+#define  LP_XIR_STEER_1	0x0000000000000002UL
+#define  LP_XIR_STEER_0	0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER	0x0000000000000040UL
+#define  CMT_ER_STEER_1	0x0000000000000002UL
+#define  CMT_ER_STEER_0	0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
new file mode 100644
index 000000000000..2950279dd776
--- /dev/null
+++ b/include/asm-sparc64/compat.h
@@ -0,0 +1,201 @@
+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		compat_uid_t;
+typedef u16		compat_gid_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_time_t	st_atime;
+	u32		__unused1;
+	compat_time_t	st_mtime;
+	u32		__unused2;
+	compat_time_t	st_ctime;
+	u32		__unused3;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static __inline__ void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current_thread_info()->kregs;
+	unsigned long usp = regs->u_regs[UREG_I6];
+
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp += STACK_BIAS;
+	else
+		usp &= 0xffffffffUL;
+
+	return (void __user *) (usp - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__kernel_uid_t uid;
+	__kernel_gid_t gid;
+	__kernel_uid_t cuid;
+	__kernel_gid_t cgid;
+	unsigned short __pad1;
+	compat_mode_t mode;
+	unsigned short __pad2;
+	unsigned short seq;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int	__pad1;
+	compat_time_t	sem_otime;
+	unsigned int	__pad2;
+	compat_time_t	sem_ctime;
+	u32		sem_nsems;
+	u32		__unused1;
+	u32		__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int	__pad1;
+	compat_time_t	msg_stime;
+	unsigned int	__pad2;
+	compat_time_t	msg_rtime;
+	unsigned int	__pad3;
+	compat_time_t	msg_ctime;
+	unsigned int	msg_cbytes;
+	unsigned int	msg_qnum;
+	unsigned int	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int	__pad1;
+	compat_time_t	shm_atime;
+	unsigned int	__pad2;
+	compat_time_t	shm_dtime;
+	unsigned int	__pad3;
+	compat_time_t	shm_ctime;
+	compat_size_t	shm_segsz;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	unsigned int	shm_nattch;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/include/asm-sparc64/const.h b/include/asm-sparc64/const.h
new file mode 100644
index 000000000000..8ad902b2ce04
--- /dev/null
+++ b/include/asm-sparc64/const.h
@@ -0,0 +1,19 @@
+/* const.h: Macros for dealing with constants.  */
+
+#ifndef _SPARC64_CONST_H
+#define _SPARC64_CONST_H
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specificers unilaterally.  We
+ * use the following macros to deal with this.
+ */
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y)	X
+#else
+#define _AC(X,Y)	(X##Y)
+#endif
+
+
+#endif /* !(_SPARC64_CONST_H) */
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
new file mode 100644
index 000000000000..cc7198aaac50
--- /dev/null
+++ b/include/asm-sparc64/cpudata.h
@@ -0,0 +1,31 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_CPUDATA_H
+#define _SPARC64_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+	/* Dcache line 1 */
+	unsigned int	__pad0;		/* bh_count moved to irq_stat for consistency. KAO */
+	unsigned int	multiplier;
+	unsigned int	counter;
+	unsigned int	idle_volume;
+	unsigned long	clock_tick;	/* %tick's per second */
+	unsigned long	udelay_val;
+
+	/* Dcache line 2 */
+	unsigned int	pgcache_size;
+	unsigned int	__pad1;
+	unsigned long	*pte_cache[2];
+	unsigned long	*pgd_cache;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
+#define local_cpu_data()	__get_cpu_var(__cpu_data)
+
+#endif /* _SPARC64_CPUDATA_H */
diff --git a/include/asm-sparc64/cputime.h b/include/asm-sparc64/cputime.h
new file mode 100644
index 000000000000..dec2fc7a36f8
--- /dev/null
+++ b/include/asm-sparc64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC64_CPUTIME_H
+#define __SPARC64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC64_CPUTIME_H */
diff --git a/include/asm-sparc64/current.h b/include/asm-sparc64/current.h
new file mode 100644
index 000000000000..6c21e4ee2475
--- /dev/null
+++ b/include/asm-sparc64/current.h
@@ -0,0 +1,8 @@
+#ifndef _SPARC64_CURRENT_H
+#define _SPARC64_CURRENT_H
+
+#include <linux/thread_info.h>
+
+register struct task_struct *current asm("g4");
+
+#endif /* !(_SPARC64_CURRENT_H) */
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
new file mode 100644
index 000000000000..e9a3f305815d
--- /dev/null
+++ b/include/asm-sparc64/dcr.h
@@ -0,0 +1,15 @@
+/* $Id: dcr.h,v 1.4 2001/03/09 17:56:37 davem Exp $ */
+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
+#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
+#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
+#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
+#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
+#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
+#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
+#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
+
+#endif /* _SPARC64_DCR_H */
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
new file mode 100644
index 000000000000..ecbed2ae548f
--- /dev/null
+++ b/include/asm-sparc64/dcu.h
@@ -0,0 +1,26 @@
+/* $Id: dcu.h,v 1.2 2001/03/01 23:23:33 davem Exp $ */
+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP		0x0002000000000000 /* Physical Cache Enable w/o mmu*/
+#define DCU_CV		0x0001000000000000 /* Virtual Cache Enable	w/o mmu	*/
+#define DCU_ME		0x0000800000000000 /* NC-store Merging Enable	*/
+#define DCU_RE		0x0000400000000000 /* RAW bypass Enable		*/
+#define DCU_PE		0x0000200000000000 /* PCache Enable		*/
+#define DCU_HPE		0x0000100000000000 /* HW prefetch Enable		*/
+#define DCU_SPE		0x0000080000000000 /* SW prefetch Enable		*/
+#define DCU_SL		0x0000040000000000 /* Secondary load steering Enab	*/
+#define DCU_WE		0x0000020000000000 /* WCache enable		*/
+#define DCU_PM		0x000001fe00000000 /* PA Watchpoint Byte Mask	*/
+#define DCU_VM		0x00000001fe000000 /* VA Watchpoint Byte Mask	*/
+#define DCU_PR		0x0000000001000000 /* PA Watchpoint Read Enable	*/
+#define DCU_PW		0x0000000000800000 /* PA Watchpoint Write Enable	*/
+#define DCU_VR		0x0000000000400000 /* VA Watchpoint Read Enable	*/
+#define DCU_VW		0x0000000000200000 /* VA Watchpoint Write Enable	*/
+#define DCU_DM		0x0000000000000008 /* DMMU Enable			*/
+#define DCU_IM		0x0000000000000004 /* IMMU Enable			*/
+#define DCU_DC		0x0000000000000002 /* Data Cache Enable		*/
+#define DCU_IC		0x0000000000000001 /* Instruction Cache Enable	*/
+
+#endif /* _SPARC64_DCU_H */
diff --git a/include/asm-sparc64/delay.h b/include/asm-sparc64/delay.h
new file mode 100644
index 000000000000..2901ea0c342d
--- /dev/null
+++ b/include/asm-sparc64/delay.h
@@ -0,0 +1,38 @@
+/* delay.h: Linux delay routines on sparc64.
+ *
+ * Copyright (C) 1996, 2004 David S. Miller (davem@davemloft.net).
+ *
+ * Based heavily upon x86 variant which is:
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/sparc64/lib/delay.c
+ */
+
+#ifndef __SPARC64_DELAY_H
+#define __SPARC64_DELAY_H
+
+#include <linux/config.h>
+#include <linux/param.h>
+#include <asm/cpudata.h>
+
+#ifndef __ASSEMBLY__
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+	__udelay(n))
+	
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* defined(__SPARC64_DELAY_H) */
diff --git a/include/asm-sparc64/display7seg.h b/include/asm-sparc64/display7seg.h
new file mode 100644
index 000000000000..955a3502218e
--- /dev/null
+++ b/include/asm-sparc64/display7seg.h
@@ -0,0 +1,79 @@
+/* $Id: display7seg.h,v 1.2 2000/08/02 06:22:35 davem Exp $
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC	'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
+#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT	- Toggle decimal point	(0=absent 1=present)
+ * ALARM	- Toggle alarm LED 		(0=green  1=red)
+ * FLIP		- Toggle inverted mode 	(0=normal 1=flipped) 
+ * bits 0-4	- Character displayed	(see definitions below)
+ *
+ * Display segments are defined as follows, 
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT	(1 << 7)	/* Decimal point*/
+#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
+#define D7S_FLIP	(1 << 5)	/* Flip display */
+
+#define D7S_0		0x00		/* Numerals 0-9 */
+#define D7S_1		0x01
+#define D7S_2		0x02
+#define D7S_3		0x03
+#define D7S_4		0x04
+#define D7S_5		0x05
+#define D7S_6		0x06
+#define D7S_7		0x07
+#define D7S_8		0x08
+#define D7S_9		0x09
+#define D7S_A		0x0A		/* Letters A-F, H, L, P */
+#define D7S_B		0x0B
+#define D7S_C		0x0C
+#define D7S_D		0x0D
+#define D7S_E		0x0E
+#define D7S_F		0x0F
+#define D7S_H		0x10
+#define D7S_E2		0x11
+#define D7S_L		0x12
+#define D7S_P		0x13
+#define D7S_SEGA	0x14		/* Individual segments */
+#define D7S_SEGB	0x15
+#define D7S_SEGC	0x16
+#define D7S_SEGD	0x17
+#define D7S_SEGE	0x18
+#define D7S_SEGF	0x19
+#define D7S_SEGG	0x1A
+#define D7S_SEGABFG 0x1B		/* Segment groupings */
+#define D7S_SEGCDEG	0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG	0x1E
+#define D7S_BLANK	0x1F		/* Clear all segments */
+
+#define D7S_MIN_VAL	0x0
+#define D7S_MAX_VAL	0x1F
+
+#endif /* ifndef __display7seg_h__ */
diff --git a/include/asm-sparc64/div64.h b/include/asm-sparc64/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-sparc64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
new file mode 100644
index 000000000000..1c5da41653a4
--- /dev/null
+++ b/include/asm-sparc64/dma-mapping.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_SPARC64_DMA_MAPPING_H
+#define _ASM_SPARC64_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+
+struct device;
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, int flag)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+#endif /* PCI */
+
+#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
new file mode 100644
index 000000000000..1aab3c8dce2b
--- /dev/null
+++ b/include/asm-sparc64/dma.h
@@ -0,0 +1,221 @@
+/* $Id: dma.h,v 1.21 2001/12/13 04:16:52 davem Exp $
+ * include/asm-sparc64/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+extern spinlock_t  dma_spin_lock;
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	u32 addr;                /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  (((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    (((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  (((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)		\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_ENABLE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_FIFO_INV; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)	\
+	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+	tmp &= ~DMA_ST_WRITE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
new file mode 100644
index 000000000000..543e4e500a72
--- /dev/null
+++ b/include/asm-sparc64/ebus.h
@@ -0,0 +1,97 @@
+/* $Id: ebus.h,v 1.10 2001/03/14 05:00:55 davem Exp $
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_EBUS_H
+#define __SPARC64_EBUS_H
+
+#include <asm/pbm.h>
+#include <asm/oplib.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus {
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct pci_pbm_info		*parent;
+	struct pci_dev			*self;
+	int				 index;
+	int				 is_rio;
+	int				 prom_node;
+	char				 prom_name[64];
+	struct linux_prom_ebus_ranges	 ebus_ranges[PROMREG_MAX];
+	int				 num_ebus_ranges;
+	struct linux_prom_ebus_intmap	 ebus_intmap[PROMREG_MAX];
+	int				 num_ebus_intmap;
+	struct linux_prom_ebus_intmask	 ebus_intmask;
+};
+
+struct ebus_dma_info {
+	spinlock_t	lock;
+	void __iomem	*regs;
+
+	unsigned int	flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
+
+	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+	 * set.
+	 */
+	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+	void *client_cookie;
+	unsigned int	irq;
+#define EBUS_DMA_EVENT_ERROR	1
+#define EBUS_DMA_EVENT_DMA	2
+#define EBUS_DMA_EVENT_DEVICE	4
+
+	unsigned char	name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+			    size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC64_EBUS_H) */
diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h
new file mode 100644
index 000000000000..91458118277e
--- /dev/null
+++ b/include/asm-sparc64/elf.h
@@ -0,0 +1,181 @@
+/* $Id: elf.h,v 1.32 2002/02/09 19:49:31 davem Exp $ */
+#ifndef __ASM_SPARC64_ELF_H
+#define __ASM_SPARC64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#ifdef __KERNEL__
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#endif
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifndef ELF_ARCH
+#define ELF_ARCH		EM_SPARCV9
+#define ELF_CLASS		ELFCLASS64
+#define ELF_DATA		ELFDATA2MSB
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG 36
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+/* Format of 64-bit elf_gregset_t is:
+ * 	G0 --> G7
+ * 	O0 --> O7
+ * 	L0 --> L7
+ * 	I0 --> I7
+ *	TSTATE
+ *	TPC
+ *	TNPC
+ *	Y
+ */
+#define ELF_CORE_COPY_REGS(__elf_regs, __pt_regs)	\
+do {	unsigned long *dest = &(__elf_regs[0]);		\
+	struct pt_regs *src = (__pt_regs);		\
+	unsigned long __user *sp;			\
+	int i;						\
+	for(i = 0; i < 16; i++)				\
+		dest[i] = src->u_regs[i];		\
+	/* Don't try this at home kids... */		\
+	sp = (unsigned long __user *)			\
+	 ((src->u_regs[14] + STACK_BIAS)		\
+	  & 0xfffffffffffffff8UL);			\
+	for(i = 0; i < 16; i++)				\
+		__get_user(dest[i+16], &sp[i]);		\
+	dest[32] = src->tstate;				\
+	dest[33] = src->tpc;				\
+	dest[34] = src->tnpc;				\
+	dest[35] = src->y;				\
+} while (0);
+
+typedef struct {
+	unsigned long	pr_regs[32];
+	unsigned long	pr_fsr;
+	unsigned long	pr_gsr;
+	unsigned long	pr_fprs;
+} elf_fpregset_t;
+#endif
+
+#define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs)	\
+	({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread_info->kregs); 1; })
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#ifndef elf_check_arch
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)	/* Might be EM_SPARCV9 or EM_SPARC */
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE         0x0000010000000000UL
+#endif
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+/* On Ultra, we support all of the v8 capabilities. */
+#define ELF_HWCAP	((HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+			  HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV | \
+			  HWCAP_SPARC_V9) | \
+			 ((tlb_type == cheetah || tlb_type == cheetah_plus) ? \
+			  HWCAP_SPARC_ULTRA3 : 0))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {	unsigned long new_flags = current_thread_info()->flags; \
+	new_flags &= _TIF_32BIT;			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		new_flags |= _TIF_32BIT;		\
+	else						\
+		new_flags &= ~_TIF_32BIT;		\
+	if ((current_thread_info()->flags & _TIF_32BIT) \
+	    != new_flags)				\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	/* flush_thread will update pgd cache */	\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+} while (0)
+#endif
+
+#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
new file mode 100644
index 000000000000..53a6653815eb
--- /dev/null
+++ b/include/asm-sparc64/envctrl.h
@@ -0,0 +1,103 @@
+/* $Id: envctrl.h,v 1.3 2000/11/03 00:37:40 davem Exp $
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions 
+ * VT - Add application note 
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *	fd = open("/dev/envtrl", O_RDONLY);
+ *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *	close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *	ioctlbuf[0] = 2;
+ *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
+#define ENVCTRL_VOLTAGE_BAD			0x02
+#define ENVCTRL_POWERSUPPLY_BAD			0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *		printf("ioctl fan failed\n");
+ *	}
+ *	if (read(fd, rslt, 1) <= 0) {
+ *		printf("error or fan not monitored\n");
+ *	} else {
+ *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *			printf("all fans good\n");
+ *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *		printf("all fans bad\n");
+ *	} else {
+ *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *			printf("fan 0 failed or not connected\n");
+ *	}
+ *	......
+ */  
+
+#define ENVCTRL_ALL_FANS_GOOD			0x00
+#define ENVCTRL_FAN0_FAILURE_MASK		0x01
+#define ENVCTRL_FAN1_FAILURE_MASK		0x02
+#define ENVCTRL_FAN2_FAILURE_MASK		0x04
+#define ENVCTRL_FAN3_FAILURE_MASK		0x08
+#define ENVCTRL_FAN4_FAILURE_MASK		0x10
+#define ENVCTRL_FAN5_FAILURE_MASK		0x20
+#define ENVCTRL_FAN6_FAILURE_MASK		0x40
+#define ENVCTRL_FAN7_FAILURE_MASK		0x80
+#define ENVCTRL_ALL_FANS_BAD 			0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/include/asm-sparc64/errno.h b/include/asm-sparc64/errno.h
new file mode 100644
index 000000000000..cc98a73b55a7
--- /dev/null
+++ b/include/asm-sparc64/errno.h
@@ -0,0 +1,110 @@
+/* $Id: errno.h,v 1.2 1997/04/15 12:46:11 jj Exp $ */
+#ifndef _SPARC64_ERRNO_H
+#define _SPARC64_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Net dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	ENOSTR		72	/* Device not a stream */
+#define	ETIME		73	/* Timer expired */
+#define	ENOSR		74	/* Out of streams resources */
+#define	ENOMSG		75	/* No message of desired type */
+#define	EBADMSG		76	/* Not a data message */
+#define	EIDRM		77	/* Identifier removed */
+#define	EDEADLK		78	/* Resource deadlock would occur */
+#define	ENOLCK		79	/* No record locks available */
+#define	ENONET		80	/* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define	ENOLINK		82	/* Link has been severed */
+#define	EADV		83	/* Advertise error */
+#define	ESRMNT		84	/* Srmount error */
+#define	ECOMM		85      /* Communication error on send */
+#define	EPROTO		86	/* Protocol error */
+#define	EMULTIHOP	87	/* Multihop attempted */
+#define	EDOTDOT		88	/* RFS specific error */
+#define	EREMCHG		89	/* Remote address changed */
+#define	ENOSYS		90	/* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define	ESTRPIPE	91	/* Streams pipe error */
+#define	EOVERFLOW	92	/* Value too large for defined data type */
+#define	EBADFD		93	/* File descriptor in bad state */
+#define	ECHRNG		94	/* Channel number out of range */
+#define	EL2NSYNC	95	/* Level 2 not synchronized */
+#define	EL3HLT		96	/* Level 3 halted */
+#define	EL3RST		97	/* Level 3 reset */
+#define	ELNRNG		98	/* Link number out of range */
+#define	EUNATCH		99	/* Protocol driver not attached */
+#define	ENOCSI		100	/* No CSI structure available */
+#define	EL2HLT		101	/* Level 2 halted */
+#define	EBADE		102	/* Invalid exchange */
+#define	EBADR		103	/* Invalid request descriptor */
+#define	EXFULL		104	/* Exchange full */
+#define	ENOANO		105	/* No anode */
+#define	EBADRQC		106	/* Invalid request code */
+#define	EBADSLT		107	/* Invalid slot */
+#define	EDEADLOCK	108	/* File locking deadlock error */
+#define	EBFONT		109	/* Bad font file format */
+#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
+#define	ENODATA		111	/* No data available */
+#define	ELIBBAD		112	/* Accessing a corrupted shared library */
+#define	ENOPKG		113	/* Package not installed */
+#define	ELIBACC		114	/* Can not access a needed shared library */
+#define	ENOTUNIQ	115	/* Name not unique on network */
+#define	ERESTART	116	/* Interrupted syscall should be restarted */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EILSEQ		122	/* Illegal byte sequence */
+#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+
+#define ENOMEDIUM       125     /* No medium found */
+#define EMEDIUMTYPE     126     /* Wrong medium type */
+#define	ECANCELED	127	/* Operation Cancelled */
+#define	ENOKEY		128	/* Required key not available */
+#define	EKEYEXPIRED	129	/* Key has expired */
+#define	EKEYREVOKED	130	/* Key has been revoked */
+#define	EKEYREJECTED	131	/* Key was rejected by service */
+
+#endif /* !(_SPARC64_ERRNO_H) */
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
new file mode 100644
index 000000000000..a719c3d2f6b1
--- /dev/null
+++ b/include/asm-sparc64/estate.h
@@ -0,0 +1,50 @@
+/* $Id: estate.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
+#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
+#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
+#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
+#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
+#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
+#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */
diff --git a/include/asm-sparc64/fbio.h b/include/asm-sparc64/fbio.h
new file mode 100644
index 000000000000..500026d9f6e1
--- /dev/null
+++ b/include/asm-sparc64/fbio.h
@@ -0,0 +1,302 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-sparc64/fcntl.h b/include/asm-sparc64/fcntl.h
new file mode 100644
index 000000000000..e36def0d0d80
--- /dev/null
+++ b/include/asm-sparc64/fcntl.h
@@ -0,0 +1,78 @@
+/* $Id: fcntl.h,v 1.12 2001/09/20 00:35:34 davem Exp $ */
+#ifndef _SPARC64_FCNTL_H
+#define _SPARC64_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_RDONLY	0x0000
+#define O_WRONLY	0x0001
+#define O_RDWR		0x0002
+#define O_ACCMODE	0x0003
+#define O_NDELAY	0x0004
+#define O_APPEND	0x0008
+#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
+#define O_CREAT		0x0200	/* not fcntl */
+#define O_TRUNC		0x0400	/* not fcntl */
+#define O_EXCL		0x0800	/* not fcntl */
+#define O_SYNC		0x2000
+#define O_NONBLOCK	0x4000
+#define O_NOCTTY	0x8000	/* not fcntl */
+#define O_DIRECTORY	0x10000	/* must be a directory */
+#define O_NOFOLLOW	0x20000	/* don't follow links */
+#define O_LARGEFILE	0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME	0x200000
+
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETOWN	5	/*  for sockets. */
+#define F_SETOWN	6	/*  for sockets. */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		3
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+	short __unused;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* !(_SPARC64_FCNTL_H) */
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
new file mode 100644
index 000000000000..f29eaa254055
--- /dev/null
+++ b/include/asm-sparc64/fhc.h
@@ -0,0 +1,132 @@
+/* $Id: fhc.h,v 1.5 1999/09/21 14:39:29 davem Exp $
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL	0x00UL	/* Main control */
+#define CLOCK_STAT1	0x10UL	/* Status one */
+#define CLOCK_STAT2	0x20UL	/* Status two */
+#define CLOCK_PWRSTAT	0x30UL	/* Power status */
+#define CLOCK_PWRPRES	0x40UL	/* Power presence */
+#define CLOCK_TEMP	0x50UL	/* Temperature */
+#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
+#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
+
+#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
+
+struct linux_central {
+	struct linux_fhc		*child;
+	unsigned long			cfreg;
+	unsigned long			clkregs;
+	unsigned long			clkver;
+	int				slots;
+	int				prom_node;
+	char				prom_name[64];
+
+	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
+	int				num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+	unsigned long			pregs;	/* FHC internal regs */
+#define FHC_PREGS_ID	0x00UL	/* FHC ID */
+#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
+#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
+#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
+#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
+#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
+#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
+#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
+#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
+#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
+#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
+#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
+#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
+#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
+#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
+#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
+#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
+#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
+#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
+#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
+#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
+#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
+#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
+#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
+#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
+#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
+#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
+#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
+#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
+#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
+	unsigned long			ireg;	/* FHC IGN reg */
+#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
+	unsigned long			ffregs;	/* FHC fanfail regs */
+#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
+	unsigned long			sregs;	/* FHC system regs */
+#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
+#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
+	unsigned long			uregs;	/* FHC uart regs */
+#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
+#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
+	unsigned long			tregs;	/* FHC TOD regs */
+#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
+#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+	struct linux_fhc		*next;
+	struct linux_central		*parent;	/* NULL if not central FHC */
+	struct fhc_regs			fhc_regs;
+	int				board;
+	int				jtag_master;
+	int				prom_node;
+	char				prom_name[64];
+
+	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
+	int				num_fhc_ranges;
+};
+
+extern struct linux_central *central_bus;
+
+extern void apply_central_ranges(struct linux_central *central, 
+				 struct linux_prom_registers *regs,
+				 int nregs);
+
+extern void apply_fhc_ranges(struct linux_fhc *fhc, 
+			     struct linux_prom_registers *regs,
+			     int nregs);
+
+#endif /* !(_SPARC64_FHC_H) */
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
new file mode 100644
index 000000000000..e071b4b4edfd
--- /dev/null
+++ b/include/asm-sparc64/floppy.h
@@ -0,0 +1,811 @@
+/* $Id: floppy.h,v 1.32 2001/10/26 17:59:36 davem Exp $
+ * asm-sparc64/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *
+ * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/sbus.h>
+#include <asm/irq.h>
+
+
+/*
+ * Define this to enable exchanging drive 0 and 1 if only drive 1 is
+ * probed on PCI machines.
+ */
+#undef PCI_FDC_SWAP_DRIVES
+
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
+	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* Tape Control reg */
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on an Ultra anyways. */
+static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
+unsigned long fdc_status;
+static struct sbus_dev *floppy_sdev = NULL;
+
+struct sun_floppy_ops {
+	unsigned char	(*fd_inb) (unsigned long port);
+	void		(*fd_outb) (unsigned char value, unsigned long port);
+	void		(*fd_enable_dma) (void);
+	void		(*fd_disable_dma) (void);
+	void		(*fd_set_dma_mode) (int);
+	void		(*fd_set_dma_addr) (char *);
+	void		(*fd_set_dma_count) (int);
+	unsigned int	(*get_dma_residue) (void);
+	int		(*fd_request_irq) (void);
+	void		(*fd_free_irq) (void);
+	int		(*fd_eject) (int);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fdops.fd_enable_dma()
+#define fd_disable_dma()          sun_fdops.fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
+#define get_dma_residue(x)        sun_fdops.get_dma_residue()
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fdops.fd_request_irq()
+#define fd_free_irq()             sun_fdops.fd_free_irq()
+#define fd_eject(drive)           sun_fdops.fd_eject(drive)
+
+static int FLOPPY_MOTOR_MASK = 0x10;
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+static int sun_floppy_types[2] = { 0, 0 };
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FLOPPY0_TYPE		sun_floppy_init()
+#define FLOPPY1_TYPE		sun_floppy_types[1]
+
+#define FDC1			((unsigned long)sun_fdc)
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+static unsigned char sun_82077_fd_inb(unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sbus_readb(&sun_fdc->data_82077);
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sbus_readb(&sun_fdc->dir_82077);
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sbus_writeb(value, &sun_fdc->dor_82077);
+		break;
+	case 5: /* FD_DATA */
+		sbus_writeb(value, &sun_fdc->data_82077);
+		break;
+	case 7: /* FD_DCR */
+		sbus_writeb(value, &sun_fdc->dcr_82077);
+		break;
+	case 4: /* FD_STATUS */
+		sbus_writeb(value, &sun_fdc->status_82077);
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+
+		error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, 
+					 SA_INTERRUPT, "floppy", NULL);
+
+		return ((error == 0) ? 0 : -1);
+	}
+	return 0;
+}
+
+static void sun_fd_free_irq(void)
+{
+}
+
+static unsigned int sun_get_dma_residue(void)
+{
+	/* XXX This isn't really correct. XXX */
+	return 0;
+}
+
+static int sun_fd_eject(int drive)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+#include <asm/ebus.h>
+#include <asm/isa.h>
+#include <asm/ns87303.h>
+
+static struct ebus_dma_info sun_pci_fd_ebus_dma;
+static struct pci_dev *sun_pci_ebus_dev;
+static int sun_pci_broken_drive = -1;
+
+struct sun_pci_dma_op {
+	unsigned int 	addr;
+	int		len;
+	int		direction;
+	char		*buf;
+};
+static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
+static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
+
+extern irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static unsigned char sun_pci_fd_inb(unsigned long port)
+{
+	udelay(5);
+	return inb(port);
+}
+
+static void sun_pci_fd_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	outb(val, port);
+}
+
+static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
+			val |= 0x10;
+		}
+	}
+	outb(val, port);
+}
+
+#ifdef PCI_FDC_SWAP_DRIVES
+static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
+			val &= ~(0x03);
+			val |= 0x21;
+		}
+	}
+	outb(val, port);
+}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+static void sun_pci_fd_enable_dma(void)
+{
+	BUG_ON((NULL == sun_pci_dma_pending.buf) 	||
+	    (0	  == sun_pci_dma_pending.len) 	||
+	    (0	  == sun_pci_dma_pending.direction));
+
+	sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
+	sun_pci_dma_current.len = sun_pci_dma_pending.len;
+	sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
+
+	sun_pci_dma_pending.buf  = NULL;
+	sun_pci_dma_pending.len  = 0;
+	sun_pci_dma_pending.direction = 0;
+	sun_pci_dma_pending.addr = -1U;
+
+	sun_pci_dma_current.addr = 
+		pci_map_single(sun_pci_ebus_dev,
+			       sun_pci_dma_current.buf,
+			       sun_pci_dma_current.len,
+			       sun_pci_dma_current.direction);
+
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
+
+	if (ebus_dma_request(&sun_pci_fd_ebus_dma,
+			     sun_pci_dma_current.addr,
+			     sun_pci_dma_current.len))
+		BUG();
+}
+
+static void sun_pci_fd_disable_dma(void)
+{
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
+	if (sun_pci_dma_current.addr != -1U)
+		pci_unmap_single(sun_pci_ebus_dev,
+				 sun_pci_dma_current.addr,
+				 sun_pci_dma_current.len,
+				 sun_pci_dma_current.direction);
+	sun_pci_dma_current.addr = -1U;
+}
+
+static void sun_pci_fd_set_dma_mode(int mode)
+{
+	if (mode == DMA_MODE_WRITE)
+		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+	else
+		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+
+	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
+}
+
+static void sun_pci_fd_set_dma_count(int length)
+{
+	sun_pci_dma_pending.len = length;
+}
+
+static void sun_pci_fd_set_dma_addr(char *buffer)
+{
+	sun_pci_dma_pending.buf = buffer;
+}
+
+static unsigned int sun_pci_get_dma_residue(void)
+{
+	return ebus_dma_residue(&sun_pci_fd_ebus_dma);
+}
+
+static int sun_pci_fd_request_irq(void)
+{
+	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
+}
+
+static void sun_pci_fd_free_irq(void)
+{
+	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
+}
+
+static int sun_pci_fd_eject(int drive)
+{
+	return -EINVAL;
+}
+
+void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
+{
+	floppy_interrupt(0, NULL, NULL);
+}
+
+/*
+ * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
+ * even if this is configured using DS1, thus looks like /dev/fd1 with
+ * the cabling used in Ultras.
+ */
+#define DOR	(port + 2)
+#define MSR	(port + 4)
+#define FIFO	(port + 5)
+
+static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
+			        unsigned long reg)
+{
+	unsigned char status;
+	int timeout = 1000;
+
+	while (!((status = inb(MSR)) & 0x80) && --timeout)
+		udelay(100);
+	outb(val, reg);
+}
+
+static unsigned char sun_pci_fd_sensei(unsigned long port)
+{
+	unsigned char result[2] = { 0x70, 0x00 };
+	unsigned char status;
+	int i = 0;
+
+	sun_pci_fd_out_byte(port, 0x08, FIFO);
+	do {
+		int timeout = 1000;
+
+		while (!((status = inb(MSR)) & 0x80) && --timeout)
+			udelay(100);
+
+		if (!timeout)
+			break;
+
+		if ((status & 0xf0) == 0xd0)
+			result[i++] = inb(FIFO);
+		else
+			break;
+	} while (i < 2);
+
+	return result[0];
+}
+
+static void sun_pci_fd_reset(unsigned long port)
+{
+	unsigned char mask = 0x00;
+	unsigned char status;
+	int timeout = 10000;
+
+	outb(0x80, MSR);
+	do {
+		status = sun_pci_fd_sensei(port);
+		if ((status & 0xc0) == 0xc0)
+			mask |= 1 << (status & 0x03);
+		else
+			udelay(100);
+	} while ((mask != 0x0f) && --timeout);
+}
+
+static int sun_pci_fd_test_drive(unsigned long port, int drive)
+{
+	unsigned char status, data;
+	int timeout = 1000;
+	int ready;
+
+	sun_pci_fd_reset(port);
+
+	data = (0x10 << drive) | 0x0c | drive;
+	sun_pci_fd_out_byte(port, data, DOR);
+
+	sun_pci_fd_out_byte(port, 0x07, FIFO);
+	sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
+
+	do {
+		udelay(100);
+		status = sun_pci_fd_sensei(port);
+	} while (((status & 0xc0) == 0x80) && --timeout);
+
+	if (!timeout)
+		ready = 0;
+	else
+		ready = (status & 0x10) ? 0 : 1;
+
+	sun_pci_fd_reset(port);
+	return ready;
+}
+#undef FIFO
+#undef MSR
+#undef DOR
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI
+static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+{
+	if (!strcmp(edev->prom_name, "fdthree"))
+		return 1;
+	if (!strcmp(edev->prom_name, "floppy")) {
+		char compat[16];
+		prom_getstring(edev->prom_node,
+			       "compatible",
+			       compat, sizeof(compat));
+		compat[15] = '\0';
+		if (!strcmp(compat, "fdthree"))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI
+#undef ISA_FLOPPY_WORKS
+
+#ifdef ISA_FLOPPY_WORKS
+static unsigned long __init isa_floppy_init(void)
+{
+	struct sparc_isa_bridge *isa_br;
+	struct sparc_isa_device *isa_dev = NULL;
+
+	for_each_isa(isa_br) {
+		for_each_isadev(isa_dev, isa_br) {
+			if (!strcmp(isa_dev->prom_name, "dma")) {
+				struct sparc_isa_device *child =
+					isa_dev->child;
+
+				while (child) {
+					if (!strcmp(child->prom_name,
+						    "floppy")) {
+						isa_dev = child;
+						goto isa_done;
+					}
+					child = child->next;
+				}
+			}
+		}
+	}
+isa_done:
+	if (!isa_dev)
+		return 0;
+
+	/* We could use DMA on devices behind the ISA bridge, but...
+	 *
+	 * There is a slight problem.  Normally on x86 kit the x86 processor
+	 * delays I/O port instructions when the ISA bus "dma in progress"
+	 * signal is active.  Well, sparc64 systems do not monitor this
+	 * signal thus we would need to block all I/O port accesses in software
+	 * when a dma transfer is active for some device.
+	 */
+
+	sun_fdc = (struct sun_flpy_controller *)isa_dev->resource.start;
+	FLOPPY_IRQ = isa_dev->irq;
+
+	sun_fdops.fd_inb = sun_pci_fd_inb;
+	sun_fdops.fd_outb = sun_pci_fd_outb;
+
+	can_use_virtual_dma = use_virtual_dma = 1;
+	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+	sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+	sun_fdops.fd_request_irq = sun_fd_request_irq;
+	sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+	/* Floppy eject is manual.   Actually, could determine this
+	 * via presence of 'manual' property in OBP node.
+	 */
+	sun_fdops.fd_eject = sun_pci_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+	FLOPPY_MOTOR_MASK = 0xf0;
+
+	allowed_drive_mask = 0;
+	sun_floppy_types[0] = 0;
+	sun_floppy_types[1] = 4;
+
+	sun_pci_broken_drive = 1;
+	sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+
+	return sun_floppy_types[0];
+}
+#endif /* ISA_FLOPPY_WORKS */
+
+#endif
+
+static unsigned long __init sun_floppy_init(void)
+{
+	char state[128];
+	struct sbus_bus *bus;
+	struct sbus_dev *sdev = NULL;
+	static int initialized = 0;
+
+	if (initialized)
+		return sun_floppy_types[0];
+	initialized = 1;
+
+	for_all_sbusdev (sdev, bus) {
+		if (!strcmp(sdev->prom_name, "SUNW,fdtwo")) 
+			break;
+	}
+	if(sdev) {
+		floppy_sdev = sdev;
+		FLOPPY_IRQ = sdev->irqs[0];
+	} else {
+#ifdef CONFIG_PCI
+		struct linux_ebus *ebus;
+		struct linux_ebus_device *edev = NULL;
+		unsigned long config = 0;
+		unsigned long auxio_reg;
+
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (ebus_fdthree_p(edev))
+					goto ebus_done;
+			}
+		}
+	ebus_done:
+		if (!edev) {
+#ifdef ISA_FLOPPY_WORKS
+			return isa_floppy_init();
+#else
+			return 0;
+#endif
+		}
+
+		prom_getproperty(edev->prom_node, "status",
+				 state, sizeof(state));
+		if (!strncmp(state, "disabled", 8))
+			return 0;
+			
+		FLOPPY_IRQ = edev->irqs[0];
+
+		/* Make sure the high density bit is set, some systems
+		 * (most notably Ultra5/Ultra10) come up with it clear.
+		 */
+		auxio_reg = edev->resource[2].start;
+		writel(readl(auxio_reg)|0x2, auxio_reg);
+
+		sun_pci_ebus_dev = ebus->self;
+
+		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
+
+		/* XXX ioremap */
+		sun_pci_fd_ebus_dma.regs = edev->resource[1].start;
+		if (!sun_pci_fd_ebus_dma.regs)
+			return 0;
+
+		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
+					     EBUS_DMA_FLAG_TCI_DISABLE);
+		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
+		sun_pci_fd_ebus_dma.client_cookie = NULL;
+		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
+		strcpy(sun_pci_fd_ebus_dma.name, "floppy");
+		if (ebus_dma_register(&sun_pci_fd_ebus_dma))
+			return 0;
+
+		/* XXX ioremap */
+		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+
+		sun_fdops.fd_inb = sun_pci_fd_inb;
+		sun_fdops.fd_outb = sun_pci_fd_outb;
+
+		can_use_virtual_dma = use_virtual_dma = 0;
+		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
+		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
+		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
+		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
+		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
+		sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
+
+		sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
+		sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
+
+		sun_fdops.fd_eject = sun_pci_fd_eject;
+
+        	fdc_status = (unsigned long) &sun_fdc->status_82077;
+		FLOPPY_MOTOR_MASK = 0xf0;
+
+		/*
+		 * XXX: Find out on which machines this is really needed.
+		 */
+		if (1) {
+			sun_pci_broken_drive = 1;
+			sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+		}
+
+		allowed_drive_mask = 0;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
+			sun_floppy_types[0] = 4;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
+			sun_floppy_types[1] = 4;
+
+		/*
+		 * Find NS87303 SuperIO config registers (through ecpp).
+		 */
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (!strcmp(edev->prom_name, "ecpp")) {
+					config = edev->resource[1].start;
+					goto config_done;
+				}
+			}
+		}
+	config_done:
+
+		/*
+		 * Sanity check, is this really the NS87303?
+		 */
+		switch (config & 0x3ff) {
+		case 0x02e:
+		case 0x15c:
+		case 0x26e:
+		case 0x398:
+			break;
+		default:
+			config = 0;
+		}
+
+		if (!config)
+			return sun_floppy_types[0];
+
+		/* Enable PC-AT mode. */
+		ns87303_modify(config, ASC, 0, 0xc0);
+
+#ifdef PCI_FDC_SWAP_DRIVES
+		/*
+		 * If only Floppy 1 is present, swap drives.
+		 */
+		if (!sun_floppy_types[0] && sun_floppy_types[1]) {
+			/*
+			 * Set the drive exchange bit in FCR on NS87303,
+			 * make shure other bits are sane before doing so.
+			 */
+			ns87303_modify(config, FER, FER_EDM, 0);
+			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
+			ns87303_modify(config, FCR, 0, FCR_LDE);
+
+			config = sun_floppy_types[0];
+			sun_floppy_types[0] = sun_floppy_types[1];
+			sun_floppy_types[1] = config;
+
+			if (sun_pci_broken_drive != -1) {
+				sun_pci_broken_drive = 1 - sun_pci_broken_drive;
+				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
+			}
+		}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+		return sun_floppy_types[0];
+#else
+		return 0;
+#endif
+	}
+	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
+	if(!strncmp(state, "disabled", 8))
+		return 0;
+
+	/*
+	 * We cannot do sbus_ioremap here: it does request_region,
+	 * which the generic floppy driver tries to do once again.
+	 * But we must use the sdev resource values as they have
+	 * had parent ranges applied.
+	 */
+	sun_fdc = (struct sun_flpy_controller *)
+		(sdev->resource[0].start +
+		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+
+	/* Last minute sanity check... */
+	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+		sun_fdc = (struct sun_flpy_controller *)-1;
+		return 0;
+	}
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+
+	can_use_virtual_dma = use_virtual_dma = 1;
+	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+	sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+	sun_fdops.fd_request_irq = sun_fd_request_irq;
+	sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+	sun_fdops.fd_eject = sun_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	sun_floppy_types[0] = 4;
+	sun_floppy_types[1] = 0;
+
+	return sun_floppy_types[0];
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
new file mode 100644
index 000000000000..d583e5efd75d
--- /dev/null
+++ b/include/asm-sparc64/fpumacro.h
@@ -0,0 +1,33 @@
+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+	u32	regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static __inline__ unsigned long fprs_read(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+	return retval;
+}
+
+static __inline__ void fprs_write(unsigned long val)
+{
+	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/include/asm-sparc64/hardirq.h b/include/asm-sparc64/hardirq.h
new file mode 100644
index 000000000000..d6db1aed7645
--- /dev/null
+++ b/include/asm-sparc64/hardirq.h
@@ -0,0 +1,23 @@
+/* hardirq.h: 64-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997, 1998 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_HARDIRQ_H
+#define __SPARC64_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* rtrap.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/include/asm-sparc64/hdreg.h b/include/asm-sparc64/hdreg.h
new file mode 100644
index 000000000000..7f7fd1af0af3
--- /dev/null
+++ b/include/asm-sparc64/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h
new file mode 100644
index 000000000000..b63a33cf4971
--- /dev/null
+++ b/include/asm-sparc64/head.h
@@ -0,0 +1,59 @@
+/* $Id: head.h,v 1.30 1997/08/08 08:34:33 jj Exp $ */
+#ifndef _SPARC64_HEAD_H
+#define _SPARC64_HEAD_H
+
+#include <asm/pstate.h>
+
+#define KERNBASE	0x400000
+
+#define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
+
+#define __CHEETAH_ID	0x003e0014
+#define __JALAPENO_ID	0x003e0016
+
+#define CHEETAH_MANUF		0x003e
+#define CHEETAH_IMPL		0x0014
+#define CHEETAH_PLUS_IMPL	0x0015
+#define JALAPENO_IMPL		0x0016
+
+#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__CHEETAH_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__CHEETAH_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__JALAPENO_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__JALAPENO_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_PLUS_IMPL;	\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_IMPL;		\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#endif /* !(_SPARC64_HEAD_H) */
diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h
new file mode 100644
index 000000000000..153cae2ddaee
--- /dev/null
+++ b/include/asm-sparc64/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC64_HW_IRQ_H
+#define __ASM_SPARC64_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
new file mode 100644
index 000000000000..4c1098474c73
--- /dev/null
+++ b/include/asm-sparc64/ide.h
@@ -0,0 +1,121 @@
+/* $Id: ide.h,v 1.21 2001/09/25 20:21:48 kanoj Exp $
+ * ide.h: Ultra/PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_IDE_H
+#define _SPARC64_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_BLK_DEV_IDEPCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	2
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc64, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static inline unsigned int inw_be(void __iomem *addr)
+{
+	unsigned int ret;
+
+	__asm__ __volatile__("lduha [%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#ifdef DCACHE_ALIASING_POSSIBLE
+	unsigned long end = (unsigned long)dst + (count << 1);
+#endif
+	u16 *ps = dst;
+	u32 *pi;
+
+	if(((u64)ps) & 0x2) {
+		*ps++ = inw_be(port);
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = inw_be(port) << 16;
+		w |= inw_be(port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = inw_be(port);
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+	__flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void outw_be(unsigned short w, void __iomem *addr)
+{
+	__asm__ __volatile__("stha %0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
+{
+#ifdef DCACHE_ALIASING_POSSIBLE
+	unsigned long end = (unsigned long)src + (count << 1);
+#endif
+	const u16 *ps = src;
+	const u32 *pi;
+
+	if(((u64)src) & 0x2) {
+		outw_be(*ps++, port);
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		outw_be((w >> 16), port);
+		outw_be(w, port);
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		outw_be(*ps, port);
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+	__flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_IDE_H */
diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h
new file mode 100644
index 000000000000..701483c5465d
--- /dev/null
+++ b/include/asm-sparc64/idprom.h
@@ -0,0 +1,35 @@
+/* $Id: idprom.h,v 1.2 1997/04/04 00:50:16 davem Exp $
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_IDPROM_H
+#define _SPARC64_IDPROM_H
+
+#include <linux/types.h>
+
+/* Offset into the EEPROM where the id PROM is located on the 4c */
+#define IDPROM_OFFSET  0x7d8
+
+/* On sun4m; physical. */
+/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
+#define IDPROM_OFFSET_M  0xfd8
+
+struct idprom
+{
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#define IDPROM_SIZE  (sizeof(struct idprom))
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
new file mode 100644
index 000000000000..afdcea90707a
--- /dev/null
+++ b/include/asm-sparc64/io.h
@@ -0,0 +1,501 @@
+/* $Id: io.h,v 1.47 2001/12/13 10:36:02 davem Exp $ */
+#ifndef __SPARC64_IO_H
+#define __SPARC64_IO_H
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+#include <asm/asi.h>
+
+/* PC crapola... */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+extern unsigned long virt_to_bus_not_defined_use_pci_map(volatile void *addr);
+#define virt_to_bus virt_to_bus_not_defined_use_pci_map
+extern unsigned long bus_to_virt_not_defined_use_pci_map(volatile void *addr);
+#define bus_to_virt bus_to_virt_not_defined_use_pci_map
+
+/* BIO layer definitions. */
+extern unsigned long kern_base, kern_size;
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define BIO_VMERGE_BOUNDARY	8192
+
+/* Different PCI controllers we support have their PCI MEM space
+ * mapped to an either 2GB (Psycho) or 4GB (Sabre) aligned area,
+ * so need to chop off the top 33 or 32 bits.
+ */
+extern unsigned long pci_memspace_mask;
+
+#define bus_dvma_to_mem(__vaddr) ((__vaddr) & pci_memspace_mask)
+
+static __inline__ u8 _inb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static __inline__ u16 _inw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static __inline__ u32 _inl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static __inline__ void _outb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+static __inline__ void _outw(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+static __inline__ void _outl(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+#define inb(__addr)		(_inb((unsigned long)(__addr)))
+#define inw(__addr)		(_inw((unsigned long)(__addr)))
+#define inl(__addr)		(_inl((unsigned long)(__addr)))
+#define outb(__b, __addr)	(_outb((u8)(__b), (unsigned long)(__addr)))
+#define outw(__w, __addr)	(_outw((u16)(__w), (unsigned long)(__addr)))
+#define outl(__l, __addr)	(_outl((u32)(__l), (unsigned long)(__addr)))
+
+#define inb_p(__addr) 		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+extern void outsb(void __iomem *addr, const void *src, unsigned long count);
+extern void outsw(void __iomem *addr, const void *src, unsigned long count);
+extern void outsl(void __iomem *addr, const void *src, unsigned long count);
+extern void insb(void __iomem *addr, void *dst, unsigned long count);
+extern void insw(void __iomem *addr, void *dst, unsigned long count);
+extern void insl(void __iomem *addr, void *dst, unsigned long count);
+#define ioread8_rep(a,d,c)	insb(a,d,c)
+#define ioread16_rep(a,d,c)	insw(a,d,c)
+#define ioread32_rep(a,d,c)	insl(a,d,c)
+#define iowrite8_rep(a,s,c)	outsb(a,s,c)
+#define iowrite16_rep(a,s,c)	outsw(a,s,c)
+#define iowrite32_rep(a,s,c)	outsl(a,s,c)
+
+/* Memory functions, same as I/O accesses on Ultra. */
+static inline u8 _readb(const volatile void __iomem *addr)
+{	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+	return ret;
+}
+
+static inline u16 _readw(const volatile void __iomem *addr)
+{	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static inline u32 _readl(const volatile void __iomem *addr)
+{	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static inline u64 _readq(const volatile void __iomem *addr)
+{	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+
+	return ret;
+}
+
+static inline void _writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+static inline void _writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+static inline void _writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+static inline void _writeq(u64 q, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+}
+
+#define readb(__addr)		_readb(__addr)
+#define readw(__addr)		_readw(__addr)
+#define readl(__addr)		_readl(__addr)
+#define readq(__addr)		_readq(__addr)
+#define readb_relaxed(__addr)	_readb(__addr)
+#define readw_relaxed(__addr)	_readw(__addr)
+#define readl_relaxed(__addr)	_readl(__addr)
+#define readq_relaxed(__addr)	_readq(__addr)
+#define writeb(__b, __addr)	_writeb(__b, __addr)
+#define writew(__w, __addr)	_writew(__w, __addr)
+#define writel(__l, __addr)	_writel(__l, __addr)
+#define writeq(__q, __addr)	_writeq(__q, __addr)
+
+/* Now versions without byte-swapping. */
+static __inline__ u8 _raw_readb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ u16 _raw_readw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ u32 _raw_readl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ u64 _raw_readq(unsigned long addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ void _raw_writeb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _raw_writew(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _raw_writel(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _raw_writeq(u64 q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define __raw_readb(__addr)		(_raw_readb((unsigned long)(__addr)))
+#define __raw_readw(__addr)		(_raw_readw((unsigned long)(__addr)))
+#define __raw_readl(__addr)		(_raw_readl((unsigned long)(__addr)))
+#define __raw_readq(__addr)		(_raw_readq((unsigned long)(__addr)))
+#define __raw_writeb(__b, __addr)	(_raw_writeb((u8)(__b), (unsigned long)(__addr)))
+#define __raw_writew(__w, __addr)	(_raw_writew((u16)(__w), (unsigned long)(__addr)))
+#define __raw_writel(__l, __addr)	(_raw_writel((u32)(__l), (unsigned long)(__addr)))
+#define __raw_writeq(__q, __addr)	(_raw_writeq((u64)(__q), (unsigned long)(__addr)))
+
+/* Valid I/O Space regions are anywhere, because each PCI bus supported
+ * can live in an arbitrary area of the physical address range.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+/* Now, SBUS variants, only difference from PCI is that we do
+ * not use little-endian ASIs.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u64 _sbus_readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_readq(__addr)		_sbus_readq(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+#define sbus_writeq(__l, __addr)	_sbus_writeq(__l, __addr)
+
+static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, dst);
+		dst++;
+	}
+}
+
+#define sbus_memset_io(d,c,sz)	_sbus_memset_io(d,c,sz)
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void 
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+static inline int check_signature(void __iomem *io_addr,
+				  const unsigned char *signature,
+				  int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature++)
+			goto out;
+		io_addr++;
+	} while (--length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+/* On sparc64 we have the whole physical IO address space accessible
+ * using physically addressed loads and stores, so this does nothing.
+ */
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void __iomem *)offset;
+}
+
+#define ioremap_nocache(X,Y)		ioremap((X),(Y))
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/* Similarly for SBUS. */
+#define sbus_ioremap(__res, __offset, __size, __name) \
+({	unsigned long __ret; \
+	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
+	__ret += (unsigned long) (__offset); \
+	if (! request_region((__ret), (__size), (__name))) \
+		__ret = 0UL; \
+	(void __iomem *) __ret; \
+})
+
+#define sbus_iounmap(__addr, __size)	\
+	release_region((unsigned long)(__addr), (__size))
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
+
+#endif /* !(__SPARC64_IO_H) */
diff --git a/include/asm-sparc64/ioctl.h b/include/asm-sparc64/ioctl.h
new file mode 100644
index 000000000000..253d0b57b316
--- /dev/null
+++ b/include/asm-sparc64/ioctl.h
@@ -0,0 +1,68 @@
+/* $Id: ioctl.h,v 1.2 1998/10/15 05:40:38 jj Exp $ */
+#ifndef _SPARC64_IOCTL_H
+#define _SPARC64_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC64_IOCTL_H) */
diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h
new file mode 100644
index 000000000000..2223b6d0e5ed
--- /dev/null
+++ b/include/asm-sparc64/ioctls.h
@@ -0,0 +1,135 @@
+/* $Id: ioctls.h,v 1.7 1998/02/23 02:49:41 davem Exp $ */
+#ifndef _ASM_SPARC64_IOCTLS_H
+#define _ASM_SPARC64_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TCGETS		_IOR('T', 8, struct termios)
+#define TCSETS		_IOW('T', 9, struct termios)
+#define TCSETSW		_IOW('T', 10, struct termios)
+#define TCSETSF		_IOW('T', 11, struct termios)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * think we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD	_IOR('t', 0, int)
+#define TIOCSETD	_IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL	_IO('t', 13)
+#define TIOCNXCL	_IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS	_IO('t', 36)
+#define __TIOCSSIZE     _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */
+#define __TIOCGSIZE     _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */
+#define TIOCGSOFTCAR	_IOR('t', 100, int)
+#define TIOCSSOFTCAR	_IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET	_IOR('t', 106, int)
+#define TIOCMBIC	_IOW('t', 107, int)
+#define TIOCMBIS	_IOW('t', 108, int)
+#define TIOCMSET	_IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT		_IOW('t', 112, int)
+#define TIOCNOTTY	_IO('t', 113)
+#define TIOCSTI		_IOW('t', 114, char)
+#define TIOCOUTQ	_IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP	_IOW('t', 130, int)
+#define TIOCGPGRP	_IOR('t', 131, int)
+#define TIOCSCTTY	_IO('t', 132)
+#define TIOCGSID	_IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX	0x541C
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TCSBRKP		0x5425
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT	0x545C /* Wait for change on serial input line(s) */
+#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#endif /* !(_ASM_SPARC64_IOCTLS_H) */
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
new file mode 100644
index 000000000000..5fd16e42a045
--- /dev/null
+++ b/include/asm-sparc64/iommu.h
@@ -0,0 +1,19 @@
+/* $Id: iommu.h,v 1.10 2001/03/08 09:55:56 davem Exp $
+ * iommu.h: Definitions for the sun5 IOMMU.
+ *
+ * Copyright (C) 1996, 1999 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC64_IOMMU_H
+#define _SPARC64_IOMMU_H
+
+/* The format of an iopte in the page tables. */
+#define IOPTE_VALID   0x8000000000000000UL /* IOPTE is valid                  */
+#define IOPTE_64K     0x2000000000000000UL /* IOPTE is for 64k page           */
+#define IOPTE_STBUF   0x1000000000000000UL /* DVMA can use streaming buffer   */
+#define IOPTE_INTRA   0x0800000000000000UL /* SBUS slot-->slot direct transfer*/
+#define IOPTE_CONTEXT 0x07ff800000000000UL /* Context number		      */
+#define IOPTE_PAGE    0x00007fffffffe000UL /* Physical page number (PA[42:13])*/
+#define IOPTE_CACHE   0x0000000000000010UL /* Cached (in UPA E-cache)         */
+#define IOPTE_WRITE   0x0000000000000002UL /* Writeable                       */
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc64/ipc.h b/include/asm-sparc64/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-sparc64/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-sparc64/ipcbuf.h b/include/asm-sparc64/ipcbuf.h
new file mode 100644
index 000000000000..9c5bf1bc423f
--- /dev/null
+++ b/include/asm-sparc64/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _SPARC64_IPCBUF_H
+#define _SPARC64_IPCBUF_H
+
+/* 
+ * The ipc64_perm structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	__pad1;
+	unsigned short	seq;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_IPCBUF_H */
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
new file mode 100644
index 000000000000..3aef0ca67750
--- /dev/null
+++ b/include/asm-sparc64/irq.h
@@ -0,0 +1,157 @@
+/* $Id: irq.h,v 1.21 2002/01/23 11:27:36 davem Exp $
+ * irq.h: IRQ registers on the 64-bit Sparc.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#ifndef _SPARC64_IRQ_H
+#define _SPARC64_IRQ_H
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <asm/pil.h>
+#include <asm/ptrace.h>
+
+/* You should not mess with this directly. That's the job of irq.c.
+ *
+ * If you make changes here, please update hand coded assembler of
+ * SBUS/floppy interrupt handler in entry.S -DaveM
+ *
+ * This is currently one DCACHE line, two buckets per L2 cache
+ * line.  Keep this in mind please.
+ */
+struct ino_bucket {
+	/* Next handler in per-CPU PIL worklist.  We know that
+	 * bucket pointers have the high 32-bits clear, so to
+	 * save space we only store the bits we need.
+	 */
+/*0x00*/unsigned int irq_chain;
+
+	/* PIL to schedule this IVEC at. */
+/*0x04*/unsigned char pil;
+
+	/* If an IVEC arrives while irq_info is NULL, we
+	 * set this to notify request_irq() about the event.
+	 */
+/*0x05*/unsigned char pending;
+
+	/* Miscellaneous flags. */
+/*0x06*/unsigned char flags;
+
+	/* This is used to deal with IBF_DMA_SYNC on
+	 * Sabre systems.
+	 */
+/*0x07*/unsigned char synctab_ent;
+
+	/* Reference to handler for this IRQ.  If this is
+	 * non-NULL this means it is active and should be
+	 * serviced.  Else the pending member is set to one
+	 * and later registry of the interrupt checks for
+	 * this condition.
+	 *
+	 * Normally this is just an irq_action structure.
+	 * But, on PCI, if multiple interrupt sources behind
+	 * a bridge have multiple interrupt sources that share
+	 * the same INO bucket, this points to an array of
+	 * pointers to four IRQ action structures.
+	 */
+/*0x08*/void *irq_info;
+
+	/* Sun5 Interrupt Clear Register. */
+/*0x10*/unsigned long iclr;
+
+	/* Sun5 Interrupt Mapping Register. */
+/*0x18*/unsigned long imap;
+
+};
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_dma_wsync;
+extern unsigned long dma_sync_reg_table[256];
+extern unsigned char dma_sync_reg_table_entry;
+#endif
+
+/* IMAP/ICLR register defines */
+#define IMAP_VALID		0x80000000	/* IRQ Enabled		*/
+#define IMAP_TID_UPA		0x7c000000	/* UPA TargetID		*/
+#define IMAP_TID_JBUS		0x7c000000	/* JBUS TargetID	*/
+#define IMAP_AID_SAFARI		0x7c000000	/* Safari AgentID	*/
+#define IMAP_NID_SAFARI		0x03e00000	/* Safari NodeID	*/
+#define IMAP_IGN		0x000007c0	/* IRQ Group Number	*/
+#define IMAP_INO		0x0000003f	/* IRQ Number		*/
+#define IMAP_INR		0x000007ff	/* Full interrupt number*/
+
+#define ICLR_IDLE		0x00000000	/* Idle state		*/
+#define ICLR_TRANSMIT		0x00000001	/* Transmit state	*/
+#define ICLR_PENDING		0x00000003	/* Pending state	*/
+
+/* Only 8-bits are available, be careful.  -DaveM */
+#define IBF_DMA_SYNC	0x01	/* DMA synchronization behind PCI bridge needed. */
+#define IBF_PCI		0x02	/* Indicates PSYCHO/SABRE/SCHIZO PCI interrupt.	 */
+#define IBF_ACTIVE	0x04	/* This interrupt is active and has a handler.	 */
+#define IBF_MULTI	0x08	/* On PCI, indicates shared bucket.		 */
+#define IBF_INPROGRESS	0x10	/* IRQ is being serviced.			 */
+
+#define NUM_IVECS	(IMAP_INR + 1)
+extern struct ino_bucket ivector_table[NUM_IVECS];
+
+#define __irq_ino(irq) \
+        (((struct ino_bucket *)(unsigned long)(irq)) - &ivector_table[0])
+#define __irq_pil(irq) ((struct ino_bucket *)(unsigned long)(irq))->pil
+#define __bucket(irq) ((struct ino_bucket *)(unsigned long)(irq))
+#define __irq(bucket) ((unsigned int)(unsigned long)(bucket))
+
+static __inline__ char *__irq_itoa(unsigned int irq)
+{
+	static char buff[16];
+
+	sprintf(buff, "%d,%x", __irq_pil(irq), (unsigned int)__irq_ino(irq));
+	return buff;
+}
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)	(irq)
+extern void disable_irq(unsigned int);
+#define disable_irq_nosync disable_irq
+extern void enable_irq(unsigned int);
+extern unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap);
+extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
+
+extern int request_fast_irq(unsigned int irq,
+			    irqreturn_t (*handler)(int, void *, struct pt_regs *),
+			    unsigned long flags, __const__ char *devname,
+			    void *dev_id);
+
+static __inline__ void set_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static __inline__ void clear_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%clear_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static __inline__ unsigned long get_softint(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd	%%softint, %0"
+			     : "=r" (retval));
+	return retval;
+}
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
diff --git a/include/asm-sparc64/isa.h b/include/asm-sparc64/isa.h
new file mode 100644
index 000000000000..4601bbfc3e7b
--- /dev/null
+++ b/include/asm-sparc64/isa.h
@@ -0,0 +1,54 @@
+/* $Id: isa.h,v 1.1 2001/05/11 04:31:55 davem Exp $
+ * isa.h: Sparc64 layer for PCI to ISA bridge devices.
+ *
+ * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_ISA_H
+#define __SPARC64_ISA_H
+
+#include <asm/pbm.h>
+#include <asm/oplib.h>
+
+struct sparc_isa_bridge;
+
+struct sparc_isa_device {
+	struct sparc_isa_device	*next;
+	struct sparc_isa_device	*child;
+	struct sparc_isa_bridge	*bus;
+	int			prom_node;
+	char			prom_name[64];
+	char			compatible[64];
+	struct resource		resource;
+	unsigned int		irq;
+};
+
+struct sparc_isa_bridge {
+	struct sparc_isa_bridge	*next;
+	struct sparc_isa_device	*devices;
+	struct pci_pbm_info	*parent;
+	struct pci_dev		*self;
+	int			index;
+	int			prom_node;
+	char			prom_name[64];
+#define linux_prom_isa_ranges linux_prom_ebus_ranges
+	struct linux_prom_isa_ranges	isa_ranges[PROMREG_MAX];
+	int			num_isa_ranges;
+#define linux_prom_isa_intmap	linux_prom_ebus_intmap
+	struct linux_prom_isa_intmap	isa_intmap[PROMREG_MAX];
+	int			num_isa_intmap;
+#define linux_prom_isa_intmask	linux_prom_ebus_intmask
+	struct linux_prom_isa_intmap	isa_intmask;
+};
+
+extern struct sparc_isa_bridge	*isa_chain;
+
+extern void isa_init(void);
+
+#define for_each_isa(bus)						\
+        for((bus) = isa_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_isadev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#endif /* !(__SPARC64_ISA_H) */
diff --git a/include/asm-sparc64/kbio.h b/include/asm-sparc64/kbio.h
new file mode 100644
index 000000000000..3cf496bdf399
--- /dev/null
+++ b/include/asm-sparc64/kbio.h
@@ -0,0 +1,56 @@
+#ifndef __LINUX_KBIO_H
+#define __LINUX_KBIO_H
+
+/* Return keyboard type */
+#define KIOCTYPE    _IOR('k', 9, int)
+/* Return Keyboard layout */
+#define KIOCLAYOUT  _IOR('k', 20, int)
+
+enum {
+    TR_NONE,
+    TR_ASCII,			/* keyboard is in regular state */
+    TR_EVENT,			/* keystrokes sent as firm events */
+    TR_UNTRANS_EVENT		/* EVENT+up and down+no translation */
+};
+
+/* Return the current keyboard translation */
+#define KIOCGTRANS  _IOR('k', 5, int)
+/* Set the keyboard translation */
+#define KIOCTRANS   _IOW('k', 0, int)
+
+/* Send a keyboard command */
+#define KIOCCMD     _IOW('k', 8, int)
+
+/* Return if keystrokes are being sent to /dev/kbd */
+
+/* Set routing of keystrokes to /dev/kbd */
+#define KIOCSDIRECT _IOW('k', 10, int)
+
+/* Set keyboard leds */
+#define KIOCSLED    _IOW('k', 14, unsigned char)
+
+/* Get keyboard leds */
+#define KIOCGLED    _IOR('k', 15, unsigned char)
+
+/* Used by KIOC[GS]RATE */
+struct kbd_rate {
+	unsigned char delay;	/* Delay in Hz before first repeat.	*/
+	unsigned char rate;	/* In characters per second (0..50).	*/
+};
+
+/* Set keyboard rate */
+#define KIOCSRATE   _IOW('k', 40, struct kbd_rate)
+
+/* Get keyboard rate */
+#define KIOCGRATE   _IOW('k', 41, struct kbd_rate)
+
+/* Top bit records if the key is up or down */
+#define KBD_UP      0x80
+
+/* Usable information */
+#define KBD_KEYMASK 0x7f
+
+/* All keys up */
+#define KBD_IDLE    0x75
+
+#endif /* __LINUX_KBIO_H */
diff --git a/include/asm-sparc64/kdebug.h b/include/asm-sparc64/kdebug.h
new file mode 100644
index 000000000000..f70d3dad01f9
--- /dev/null
+++ b/include/asm-sparc64/kdebug.h
@@ -0,0 +1,52 @@
+#ifndef _SPARC64_KDEBUG_H
+#define _SPARC64_KDEBUG_H
+
+/* Nearly identical to x86_64/i386 code. */
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args {
+	struct pt_regs *regs;
+	const char *str;
+	long err;
+	int trapnr;
+	int signr;
+};
+
+/* Note - you should never unregister because that can race with NMIs.
+ * If you really want to do it first unregister - then synchronize_kernel
+ * - then free.
+ */
+int register_die_notifier(struct notifier_block *nb);
+extern struct notifier_block *sparc64die_chain;
+
+extern void bad_trap(struct pt_regs *, long);
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_DEBUG,	/* ta 0x70 */
+	DIE_DEBUG_2,	/* ta 0x71 */
+	DIE_DIE,
+	DIE_TRAP,
+	DIE_TRAP_TL1,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_PAGE_FAULT,
+};
+
+static inline int notify_die(enum die_val val,char *str, struct pt_regs *regs,
+			     long err, int trap, int sig)
+{
+	struct die_args args = { .regs		= regs,
+				 .str		= str,
+				 .err		= err,
+				 .trapnr	= trap,
+				 .signr		= sig };
+
+	return notifier_call_chain(&sparc64die_chain, val, &args);
+}
+
+#endif
diff --git a/include/asm-sparc64/kmap_types.h b/include/asm-sparc64/kmap_types.h
new file mode 100644
index 000000000000..34c1d3d9a3b0
--- /dev/null
+++ b/include/asm-sparc64/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on sparc64.  -DaveM
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
new file mode 100644
index 000000000000..a8d326a598f0
--- /dev/null
+++ b/include/asm-sparc64/kprobes.h
@@ -0,0 +1,32 @@
+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)pentry
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+#ifdef CONFIG_KPROBES
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#else				/* !CONFIG_KPROBES */
+static inline int kprobe_exceptions_notify(struct notifier_block *self,
+					   unsigned long val, void *data)
+{
+	return 0;
+}
+#endif
+
+#endif /* _SPARC64_KPROBES_H */
diff --git a/include/asm-sparc64/linkage.h b/include/asm-sparc64/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-sparc64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-sparc64/local.h b/include/asm-sparc64/local.h
new file mode 100644
index 000000000000..dfde115ac892
--- /dev/null
+++ b/include/asm-sparc64/local.h
@@ -0,0 +1,40 @@
+#ifndef _ARCH_SPARC64_LOCAL_H
+#define _ARCH_SPARC64_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef atomic64_t local_t;
+
+#define LOCAL_INIT(i)	ATOMIC64_INIT(i)
+#define local_read(v)	atomic64_read(v)
+#define local_set(v,i)	atomic64_set(v,i)
+
+#define local_inc(v)	atomic64_inc(v)
+#define local_dec(v)	atomic64_dec(v)
+#define local_add(i, v)	atomic64_add(i, v)
+#define local_sub(i, v)	atomic64_sub(i, v)
+
+#define __local_inc(v)		((v)->counter++)
+#define __local_dec(v)		((v)->counter--)
+#define __local_add(i,v)	((v)->counter+=(i))
+#define __local_sub(i,v)	((v)->counter-=(i))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	__local_inc(&__get_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__get_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__get_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__get_cpu_var(v))
+
+#endif /* _ARCH_SPARC64_LOCAL_H */
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
new file mode 100644
index 000000000000..e5329c7f5833
--- /dev/null
+++ b/include/asm-sparc64/lsu.h
@@ -0,0 +1,20 @@
+/* $Id: lsu.h,v 1.2 1997/04/04 00:50:22 davem Exp $ */
+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <asm/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */
diff --git a/include/asm-sparc64/mc146818rtc.h b/include/asm-sparc64/mc146818rtc.h
new file mode 100644
index 000000000000..75bd572b35fe
--- /dev/null
+++ b/include/asm-sparc64/mc146818rtc.h
@@ -0,0 +1,35 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC64_MC146818RTC_H
+#define __ASM_SPARC64_MC146818RTC_H
+
+#include <linux/config.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#ifdef CONFIG_PCI
+extern unsigned long ds1287_regs;
+#else
+#define ds1287_regs (0UL)
+#endif
+#define RTC_PORT(x)	(ds1287_regs + (x))
+#define RTC_ALWAYS_BCD	0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h
new file mode 100644
index 000000000000..01cecf54357b
--- /dev/null
+++ b/include/asm-sparc64/mman.h
@@ -0,0 +1,62 @@
+/* $Id: mman.h,v 1.2 2000/03/15 02:44:26 davem Exp $ */
+#ifndef __SPARC64_MMAN_H__
+#define __SPARC64_MMAN_H__
+
+/* SunOS'ified... */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system
+ * XXX calls.
+ */
+
+/* SunOS sys_mctl() stuff... */
+#define MC_SYNC         1  /* Sync pages in memory with storage (usu. a file) */
+#define MC_LOCK         2  /* Lock pages into core ram, do not allow swapping of them */
+#define MC_UNLOCK       3  /* Unlock pages locked via previous mctl() with MC_LOCK arg */
+#define MC_LOCKAS       5  /* Lock an entire address space of the calling process */
+#define MC_UNLOCKAS     6  /* Unlock entire address space of calling process */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+#define MADV_FREE	0x5		/* (Solaris) contents can be freed */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __SPARC64_MMAN_H__ */
diff --git a/include/asm-sparc64/mmu.h b/include/asm-sparc64/mmu.h
new file mode 100644
index 000000000000..8627eed6e83d
--- /dev/null
+++ b/include/asm-sparc64/mmu.h
@@ -0,0 +1,99 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#include <linux/config.h>
+#include <asm/page.h>
+#include <asm/const.h>
+
+/*
+ * For the 8k pagesize kernel, use only 10 hw context bits to optimize some
+ * shifts in the fast tlbmiss handlers, instead of all 13 bits (specifically
+ * for vpte offset calculation). For other pagesizes, this optimization in
+ * the tlbhandlers can not be done; but still, all 13 bits can not be used
+ * because the tlb handlers use "andcc" instruction which sign extends 13
+ * bit arguments.
+ */
+#if PAGE_SHIFT == 13
+#define CTX_NR_BITS		10
+#else
+#define CTX_NR_BITS		12
+#endif
+
+#define TAG_CONTEXT_BITS	((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
+
+/* UltraSPARC-III+ and later have a feature whereby you can
+ * select what page size the various Data-TLB instances in the
+ * chip.  In order to gracefully support this, we put the version
+ * field in a spot outside of the areas of the context register
+ * where this parameter is specified.
+ */
+#define CTX_VERSION_SHIFT	22
+#define CTX_VERSION_MASK	((~0UL) << CTX_VERSION_SHIFT)
+
+#define CTX_PGSZ_8KB		_AC(0x0,UL)
+#define CTX_PGSZ_64KB		_AC(0x1,UL)
+#define CTX_PGSZ_512KB		_AC(0x2,UL)
+#define CTX_PGSZ_4MB		_AC(0x3,UL)
+#define CTX_PGSZ_BITS		_AC(0x7,UL)
+#define CTX_PGSZ0_NUC_SHIFT	61
+#define CTX_PGSZ1_NUC_SHIFT	58
+#define CTX_PGSZ0_SHIFT		16
+#define CTX_PGSZ1_SHIFT		19
+#define CTX_PGSZ_MASK		((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
+				 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_8KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_64KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_512KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_4MB
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_512KB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_64KB
+#endif
+
+#define CTX_PGSZ_KERN	CTX_PGSZ_4MB
+
+/* Thus, when running on UltraSPARC-III+ and later, we use the following
+ * PRIMARY_CONTEXT register values for the kernel context.
+ */
+#define CTX_CHEETAH_PLUS_NUC \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
+
+#define CTX_CHEETAH_PLUS_CTX0 \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
+
+/* If you want "the TLB context number" use CTX_NR_MASK.  If you
+ * want "the bits I program into the context registers" use
+ * CTX_HW_MASK.
+ */
+#define CTX_NR_MASK		TAG_CONTEXT_BITS
+#define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
+
+#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_VALID(__ctx)	\
+	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
+#define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
+#define CTX_NRBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long	sparc64_ctx_val;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __MMU_H */
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
new file mode 100644
index 000000000000..87c43c67866e
--- /dev/null
+++ b/include/asm-sparc64/mmu_context.h
@@ -0,0 +1,145 @@
+/* $Id: mmu_context.h,v 1.54 2002/02/09 19:49:31 davem Exp $ */
+#ifndef __SPARC64_MMU_CONTEXT_H
+#define __SPARC64_MMU_CONTEXT_H
+
+/* Derived heavily from Linus's Alpha/AXP ASN code... */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern spinlock_t ctx_alloc_lock;
+extern unsigned long tlb_context_cache;
+extern unsigned long mmu_context_bmap[];
+
+extern void get_new_mmu_context(struct mm_struct *mm);
+
+/* Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ * This just needs to set mm->context to an invalid context.
+ */
+#define init_new_context(__tsk, __mm)	\
+	(((__mm)->context.sparc64_ctx_val = 0UL), 0)
+
+/* Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state, and in the sparc64
+ * case this just means freeing up the mmu context ID held by
+ * this task if valid.
+ */
+#define destroy_context(__mm)					\
+do {	spin_lock(&ctx_alloc_lock);				\
+	if (CTX_VALID((__mm)->context)) {			\
+		unsigned long nr = CTX_NRBITS((__mm)->context);	\
+		mmu_context_bmap[nr>>6] &= ~(1UL << (nr & 63));	\
+	}							\
+	spin_unlock(&ctx_alloc_lock);				\
+} while(0)
+
+/* Reload the two core values used by TLB miss handler
+ * processing on sparc64.  They are:
+ * 1) The physical address of mm->pgd, when full page
+ *    table walks are necessary, this is where the
+ *    search begins.
+ * 2) A "PGD cache".  For 32-bit tasks only pgd[0] is
+ *    ever used since that maps the entire low 4GB
+ *    completely.  To speed up TLB miss processing we
+ *    make this value available to the handlers.  This
+ *    decreases the amount of memory traffic incurred.
+ */
+#define reload_tlbmiss_state(__tsk, __mm) \
+do { \
+	register unsigned long paddr asm("o5"); \
+	register unsigned long pgd_cache asm("o4"); \
+	paddr = __pa((__mm)->pgd); \
+	pgd_cache = 0UL; \
+	if ((__tsk)->thread_info->flags & _TIF_32BIT) \
+		pgd_cache = get_pgd_cache((__mm)->pgd); \
+	__asm__ __volatile__("wrpr	%%g0, 0x494, %%pstate\n\t" \
+			     "mov	%3, %%g4\n\t" \
+			     "mov	%0, %%g7\n\t" \
+			     "stxa	%1, [%%g4] %2\n\t" \
+			     "membar	#Sync\n\t" \
+			     "wrpr	%%g0, 0x096, %%pstate" \
+			     : /* no outputs */ \
+			     : "r" (paddr), "r" (pgd_cache),\
+			       "i" (ASI_DMMU), "i" (TSB_REG)); \
+} while(0)
+
+/* Set MMU context in the actual hardware. */
+#define load_secondary_context(__mm) \
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t" \
+			     "flush	%%g6" \
+			     : /* No outputs */ \
+			     : "r" (CTX_HWBITS((__mm)->context)), \
+			       "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU))
+
+extern void __flush_tlb_mm(unsigned long, unsigned long);
+
+/* Switch the current MM context. */
+static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
+{
+	unsigned long ctx_valid;
+
+	spin_lock(&mm->page_table_lock);
+	if (CTX_VALID(mm->context))
+		ctx_valid = 1;
+        else
+		ctx_valid = 0;
+
+	if (!ctx_valid || (old_mm != mm)) {
+		if (!ctx_valid)
+			get_new_mmu_context(mm);
+
+		load_secondary_context(mm);
+		reload_tlbmiss_state(tsk, mm);
+	}
+
+	{
+		int cpu = smp_processor_id();
+
+		/* Even if (mm == old_mm) we _must_ check
+		 * the cpu_vm_mask.  If we do not we could
+		 * corrupt the TLB state because of how
+		 * smp_flush_tlb_{page,range,mm} on sparc64
+		 * and lazy tlb switches work. -DaveM
+		 */
+		if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+			cpu_set(cpu, mm->cpu_vm_mask);
+			__flush_tlb_mm(CTX_HWBITS(mm->context),
+				       SECONDARY_CONTEXT);
+		}
+	}
+	spin_unlock(&mm->page_table_lock);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
+{
+	int cpu;
+
+	spin_lock(&mm->page_table_lock);
+	if (!CTX_VALID(mm->context))
+		get_new_mmu_context(mm);
+	cpu = smp_processor_id();
+	if (!cpu_isset(cpu, mm->cpu_vm_mask))
+		cpu_set(cpu, mm->cpu_vm_mask);
+	spin_unlock(&mm->page_table_lock);
+
+	load_secondary_context(mm);
+	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
+	reload_tlbmiss_state(current, mm);
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/include/asm-sparc64/module.h b/include/asm-sparc64/module.h
new file mode 100644
index 000000000000..3d77ba465783
--- /dev/null
+++ b/include/asm-sparc64/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC64_MODULE_H
+#define _ASM_SPARC64_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
new file mode 100644
index 000000000000..ccf2f5f82d7f
--- /dev/null
+++ b/include/asm-sparc64/mostek.h
@@ -0,0 +1,144 @@
+/* $Id: mostek.h,v 1.4 2001/01/11 15:07:09 davem Exp $
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _SPARC64_MOSTEK_H
+#define _SPARC64_MOSTEK_H
+
+#include <asm/idprom.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ *
+ * We now deal with physical addresses for I/O to the chip. -DaveM
+ */
+static __inline__ u8 mostek_read(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+	return ret;
+}
+
+static __inline__ void mostek_write(unsigned long addr, u8 val)
+{
+	__asm__ __volatile__("stba	%0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+extern spinlock_t mostek_lock;
+extern unsigned long mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xff
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,name)	\
+	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
+#define MSTK_SET(regs,name,value) \
+do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
+	__val &= ~(MSTK_ ## name ## _MASK); \
+	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
+		  (MSTK_ ## name ## _MASK)); \
+	mostek_write(regs + MOSTEK_ ## name, __val); \
+} while(0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
+ * clock chip definitions around just in case.
+ */
+#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/include/asm-sparc64/msgbuf.h b/include/asm-sparc64/msgbuf.h
new file mode 100644
index 000000000000..55c101bd0e7d
--- /dev/null
+++ b/include/asm-sparc64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_MSGBUF_H
+#define _SPARC64_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _SPARC64_MSGBUF_H */
diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h
new file mode 100644
index 000000000000..ccda19e28695
--- /dev/null
+++ b/include/asm-sparc64/namei.h
@@ -0,0 +1,26 @@
+/* $Id: namei.h,v 1.17 2000/04/13 00:55:54 davem Exp $
+ * linux/include/asm-sparc64/namei.h
+ *
+ * Routines to handle famous /usr/gnemul/s*.
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __SPARC64_NAMEI_H
+#define __SPARC64_NAMEI_H
+
+#define SPARC_BSD_EMUL "/usr/gnemul/sunos/"
+#define SPARC_SOL_EMUL "/usr/gnemul/solaris/"
+
+static inline char * __emul_prefix(void)
+{
+	switch (current->personality) {
+	case PER_SUNOS:
+		return SPARC_BSD_EMUL;
+	case PER_SVR4:
+		return SPARC_SOL_EMUL;
+	default:
+		return NULL;
+	}
+}
+
+#endif /* __SPARC64_NAMEI_H */
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
new file mode 100644
index 000000000000..6d58fdf349b5
--- /dev/null
+++ b/include/asm-sparc64/ns87303.h
@@ -0,0 +1,119 @@
+/* $Id: ns87303.h,v 1.3 2000/01/09 15:16:34 ecd Exp $
+ * ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER	0x00
+#define FAR	0x01
+#define PTR	0x02
+#define FCR	0x03
+#define PCR	0x04
+#define KRR	0x05
+#define PMC	0x06
+#define TUP	0x07
+#define SID	0x08
+#define ASC	0x09
+#define CS0CF0	0x0a
+#define CS0CF1	0x0b
+#define CS1CF0	0x0c
+#define CS1CF1	0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK	0x03
+#define FAR_LPTB	0x00
+#define FAR_LPTA	0x01
+#define FAR_LPTC	0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7	0x08
+#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+				/*               of the parallel port	     */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE	0x01
+#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE	0x04
+#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
+				/* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED	0x00
+#define FAR_RESERVED	0x00
+#define PTR_RESERVED	0x73
+#define FCR_RESERVED	0xc4
+#define PCR_RESERVED	0x10
+#define KRR_RESERVED	0x00
+#define PMC_RESERVED	0x98
+#define TUP_RESERVED	0xfb
+#define SIP_RESERVED	0x00
+#define ASC_RESERVED	0x18
+#define CS0CF0_RESERVED	0x00
+#define CS0CF1_RESERVED	0x08
+#define CS1CF0_RESERVED	0x00
+#define CS1CF1_RESERVED	0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static __inline__ int ns87303_modify(unsigned long port, unsigned int index,
+				     unsigned char clr, unsigned char set)
+{
+	static unsigned char reserved[] = {
+		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+		CS1CF0_RESERVED, CS1CF1_RESERVED
+	};
+	unsigned long flags;
+	unsigned char value;
+
+	if (index > 0x0d)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ns87303_lock, flags);
+
+	outb(index, port);
+	value = inb(port + 1);
+	value &= ~(reserved[index] | clr);
+	value |= set;
+	outb(value, port + 1);
+	outb(value, port + 1);
+
+	spin_unlock_irqrestore(&ns87303_lock, flags);
+
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
new file mode 100644
index 000000000000..0a336901d585
--- /dev/null
+++ b/include/asm-sparc64/openprom.h
@@ -0,0 +1,281 @@
+/* $Id: openprom.h,v 1.9 2001/03/16 10:22:02 davem Exp $ */
+#ifndef __SPARC64_OPENPROM_H
+#define __SPARC64_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	unsigned start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	unsigned which_io;	/* hi part of physical address			*/
+	unsigned phys_addr;	/* The physical address of this register	*/
+	int reg_size;		/* How many bytes does this register take up?	*/
+};
+
+struct linux_prom64_registers {
+	long phys_addr;
+	long reg_size;
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+struct linux_prom64_ranges {
+	unsigned long ot_child_base;		/* Bus feels this */
+	unsigned long ot_parent_base;		/* CPU looks from here */
+	unsigned long or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_pci_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+struct linux_prom_ebus_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_ebus_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/include/asm-sparc64/openpromio.h b/include/asm-sparc64/openpromio.h
new file mode 100644
index 000000000000..847ce2326ad5
--- /dev/null
+++ b/include/asm-sparc64/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef	_SPARC64_OPENPROMIO_H
+#define	_SPARC64_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+	u_int	oprom_size;		/* Actual size of the oprom_array. */
+	char	oprom_array[1];		/* Holds property names and values. */
+};
+
+#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
+
+#define	OPROMGETOPT		0x20004F01
+#define	OPROMSETOPT		0x20004F02
+#define	OPROMNXTOPT		0x20004F03
+#define	OPROMSETOPT2		0x20004F04
+#define	OPROMNEXT		0x20004F05
+#define	OPROMCHILD		0x20004F06
+#define	OPROMGETPROP		0x20004F07
+#define	OPROMNXTPROP		0x20004F08
+#define	OPROMU2P		0x20004F09
+#define	OPROMGETCONS		0x20004F0A
+#define	OPROMGETFBNAME		0x20004F0B
+#define	OPROMGETBOOTARGS	0x20004F0C
+/* Linux extensions */				/* Arguments in oprom_array: */
+#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
+#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+	int	op_nodeid;		/* PROM Node ID (value-result) */
+	int	op_namelen;		/* Length of op_name. */
+	char	__user *op_name;	/* Pointer to the property name. */
+	int	op_buflen;		/* Length of op_buf (value-result) */
+	char	__user *op_buf;		/* Pointer to buffer. */
+};
+
+#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
+#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
+#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
+#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
+#define	OPIOCGETNEXT	_IOWR('O', 5, int)
+#define	OPIOCGETCHILD	_IOWR('O', 6, int)
+
+#endif /* _SPARC64_OPENPROMIO_H */
+
diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h
new file mode 100644
index 000000000000..a432d9e7daaa
--- /dev/null
+++ b/include/asm-sparc64/oplib.h
@@ -0,0 +1,360 @@
+/* $Id: oplib.h,v 1.14 2001/12/19 00:29:51 davem Exp $
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC64_OPLIB_H
+#define __SPARC64_OPLIB_H
+
+#include <linux/config.h>
+#include <asm/openprom.h>
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+        PROM_AP1000,  /* actually no prom at all */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* /chosen node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_chosen_node;
+
+struct linux_mlist_p1275 {
+	struct linux_mlist_p1275 *theres_more;
+	unsigned long start_adr;
+	unsigned long num_bytes;
+};
+
+struct linux_mem_p1275 {
+	struct linux_mlist_p1275 **p1275_totphys;
+	struct linux_mlist_p1275 **p1275_prommap;
+	struct linux_mlist_p1275 **p1275_available; /* What we can use */
+};
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(void *cif_handler, void *cif_stack);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries.  One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom.  So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_p1275 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Halt and power-off the machine. */
+extern void prom_halt_power_off(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ */
+typedef int (*callback_func_t)(long *cmd);
+extern void prom_setcallback(callback_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Query for input device type */
+
+enum prom_input_device {
+	PROMDEV_IKBD,			/* input from keyboard */
+	PROMDEV_ITTYA,			/* input from ttya */
+	PROMDEV_ITTYB,			/* input from ttyb */
+	PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+	PROMDEV_OSCREEN,		/* to screen */
+	PROMDEV_OTTYA,			/* to ttya */
+	PROMDEV_OTTYB,			/* to ttyb */
+	PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+#ifdef CONFIG_SMP
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long o0);
+
+/* Stop the current CPU. */
+extern void prom_stopself(void);
+
+/* Idle the current CPU. */
+extern void prom_idleself(void);
+
+/* Resume the CPU with the passed device tree node. */
+extern void prom_resumecpu(int cpunode);
+#endif
+
+/* Power management interfaces. */
+
+/* Put the current CPU to sleep. */
+extern void prom_sleepself(void);
+
+/* Put the entire system to sleep. */
+extern int prom_sleepsystem(void);
+
+/* Initiate a wakeup event. */
+extern int prom_wakeupsystem(void);
+
+/* MMU and memory related OBP interfaces. */
+
+/* Get unique string identifying SIMM at given physical address. */
+extern int prom_getunumber(int syndrome_code,
+			   unsigned long phys_addr,
+			   char *buf, int buflen);
+
+/* Retain physical memory to the caller across soft resets. */
+extern unsigned long prom_retain(char *name,
+				 unsigned long pa_low, unsigned long pa_high,
+				 long size, long align);
+
+/* Load explicit I/D TLB entries into the calling processor. */
+extern long prom_itlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+extern long prom_dtlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+/* Map/Unmap client program address ranges.  First the format of
+ * the mapping mode argument.
+ */
+#define PROM_MAP_WRITE	0x0001 /* Writable */
+#define PROM_MAP_READ	0x0002 /* Readable - sw */
+#define PROM_MAP_EXEC	0x0004 /* Executable - sw */
+#define PROM_MAP_LOCKED	0x0010 /* Locked, use i/dtlb load calls for this instead */
+#define PROM_MAP_CACHED	0x0020 /* Cacheable in both L1 and L2 caches */
+#define PROM_MAP_SE	0x0040 /* Side-Effects */
+#define PROM_MAP_GLOB	0x0080 /* Global */
+#define PROM_MAP_IE	0x0100 /* Invert-Endianness */
+#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
+
+extern int prom_map(int mode, unsigned long size,
+		    unsigned long vaddr, unsigned long paddr);
+extern void prom_unmap(unsigned long size, unsigned long vaddr);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, char *property,
+			    char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Puts in buffer a prom name in the form name@x,y or name (x for which_io 
+ * and y for first regs phys address
+ */
+extern int prom_getname(int node, char *buf, int buflen);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error. Buffer should be at least 32B long.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure. Buffer should be at least 32B long.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+			
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+
+/* Client interface level routines. */
+extern void prom_set_trap_table(unsigned long tba);
+
+extern long p1275_cmd (char *, long, ...);
+				   
+
+#if 0
+#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
+#else
+#define P1275_SIZE(x) x
+#endif
+
+/* We support at most 16 input and 1 output argument */
+#define P1275_ARG_NUMBER		0
+#define P1275_ARG_IN_STRING		1
+#define P1275_ARG_OUT_BUF		2
+#define P1275_ARG_OUT_32B		3
+#define P1275_ARG_IN_FUNCTION		4
+#define P1275_ARG_IN_BUF		5
+#define P1275_ARG_IN_64B		6
+
+#define P1275_IN(x) ((x) & 0xf)
+#define P1275_OUT(x) (((x) << 4) & 0xf0)
+#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
+#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
+
+#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
new file mode 100644
index 000000000000..219ea043a14a
--- /dev/null
+++ b/include/asm-sparc64/page.h
@@ -0,0 +1,172 @@
+/* $Id: page.h,v 1.39 2002/02/09 19:49:31 davem Exp $ */
+
+#ifndef _SPARC64_PAGE_H
+#define _SPARC64_PAGE_H
+
+#include <linux/config.h>
+#include <asm/const.h>
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define PAGE_SHIFT   13
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define PAGE_SHIFT   16
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
+#define PAGE_SHIFT   19
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
+#define PAGE_SHIFT   22
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+extern void _clear_page(void *page);
+#define clear_page(X)	_clear_page((void *)(X))
+struct page;
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+#define copy_page(X,Y)	memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
+
+/* Unlike sparc32, sparc64's parameter passing API is more
+ * sane in that structures which as small enough are passed
+ * in registers instead of on the stack.  Thus, setting
+ * STRICT_MM_TYPECHECKS does not generate worse code so
+ * let's enable it to get the type checking.
+ */
+
+#define STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking.. */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned int pmd; } pmd_t;
+typedef struct { unsigned int pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/* .. while these make it easier on the compiler */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef unsigned int pmd_t;
+typedef unsigned int pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+#define __pmd(x)        (x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* (STRICT_MM_TYPECHECKS) */
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT		22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define HPAGE_SHIFT		19
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT		16
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_32BIT) ? \
+				 (_AC(0x0000000070000000,UL)) : (PAGE_OFFSET))
+
+#endif /* !(__ASSEMBLY__) */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* We used to stick this into a hard-coded global register (%g4)
+ * but that does not make sense anymore.
+ */
+#define PAGE_OFFSET		_AC(0xFFFFF80000000000,UL)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+extern struct page *pfn_to_page(unsigned long pfn);
+extern unsigned long page_to_pfn(struct page *);
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
+
+#define pfn_valid(pfn)		(((pfn)-(pfn_base)) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * probe_memory() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+
+struct sparc_phys_banks {
+	unsigned long base_addr;
+	unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS];
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_PAGE_H) */
diff --git a/include/asm-sparc64/param.h b/include/asm-sparc64/param.h
new file mode 100644
index 000000000000..6a12f3ac0359
--- /dev/null
+++ b/include/asm-sparc64/param.h
@@ -0,0 +1,23 @@
+/* $Id: param.h,v 1.2 2000/10/30 21:01:41 davem Exp $ */
+#ifndef _ASMSPARC64_PARAM_H
+#define _ASMSPARC64_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		1000	/* Internal kernel timer frequency */
+# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASMSPARC64_PARAM_H */
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
new file mode 100644
index 000000000000..ab88349ddadc
--- /dev/null
+++ b/include/asm-sparc64/parport.h
@@ -0,0 +1,175 @@
+/* $Id: parport.h,v 1.11 2001/05/11 07:54:24 davem Exp $
+ * parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <asm/ebus.h>
+#include <asm/isa.h>
+#include <asm/ns87303.h>
+
+#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
+
+static struct sparc_ebus_info {
+	struct ebus_dma_info info;
+	unsigned int addr;
+	unsigned int count;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+			     sparc_ebus_dmas[dmanr].addr,
+			     sparc_ebus_dmas[dmanr].count))
+		BUG();
+
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	/* nothing */
+}
+
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+	sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	sparc_ebus_dmas[dmanr].count = count;
+}
+
+static __inline__ unsigned int get_dma_residue(unsigned int dmanr)
+{
+	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int ebus_ecpp_p(struct linux_ebus_device *edev)
+{
+	if (!strcmp(edev->prom_name, "ecpp"))
+		return 1;
+	if (!strcmp(edev->prom_name, "parallel")) {
+		char compat[19];
+		prom_getstring(edev->prom_node,
+			       "compatible",
+			       compat, sizeof(compat));
+		compat[18] = '\0';
+		if (!strcmp(compat, "ecpp"))
+			return 1;
+		if (!strcmp(compat, "ns87317-ecpp") &&
+		    !strcmp(compat + 13, "ecpp"))
+			return 1;
+	}
+	return 0;
+}
+
+static int parport_isa_probe(int count)
+{
+	struct sparc_isa_bridge *isa_br;
+	struct sparc_isa_device *isa_dev;
+
+	for_each_isa(isa_br) {
+		for_each_isadev(isa_dev, isa_br) {
+			struct sparc_isa_device *child;
+			unsigned long base;
+
+			if (strcmp(isa_dev->prom_name, "dma"))
+				continue;
+
+			child = isa_dev->child;
+			while (child) {
+				if (!strcmp(child->prom_name, "parallel"))
+					break;
+				child = child->next;
+			}
+			if (!child)
+				continue;
+
+			base = child->resource.start;
+
+			/* No DMA, see commentary in
+			 * asm-sparc64/floppy.h:isa_floppy_init()
+			 */
+			if (parport_pc_probe_port(base, base + 0x400,
+						  child->irq, PARPORT_DMA_NOFIFO,
+						  child->bus->self))
+				count++;
+		}
+	}
+
+	return count;
+}
+
+static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	struct linux_ebus *ebus;
+	struct linux_ebus_device *edev;
+	int count = 0;
+
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (ebus_ecpp_p(edev)) {
+				unsigned long base = edev->resource[0].start;
+				unsigned long config = edev->resource[1].start;
+				unsigned long d_base = edev->resource[2].start;
+				unsigned long d_len;
+
+				spin_lock_init(&sparc_ebus_dmas[count].info.lock);
+				d_len = (edev->resource[2].end -
+					 d_base) + 1;
+				sparc_ebus_dmas[count].info.regs =
+					ioremap(d_base, d_len);
+				if (!sparc_ebus_dmas[count].info.regs)
+					continue;
+				sparc_ebus_dmas[count].info.flags = 0;
+				sparc_ebus_dmas[count].info.callback = NULL;
+				sparc_ebus_dmas[count].info.client_cookie = NULL;
+				sparc_ebus_dmas[count].info.irq = 0xdeadbeef;
+				strcpy(sparc_ebus_dmas[count].info.name, "parport");
+				if (ebus_dma_register(&sparc_ebus_dmas[count].info))
+					continue;
+				ebus_dma_irq_enable(&sparc_ebus_dmas[count].info, 1);
+
+				/* Configure IRQ to Push Pull, Level Low */
+				/* Enable ECP, set bit 2 of the CTR first */
+				outb(0x04, base + 0x02);
+				ns87303_modify(config, PCR,
+					       PCR_EPP_ENABLE |
+					       PCR_IRQ_ODRAIN,
+					       PCR_ECP_ENABLE |
+					       PCR_ECP_CLK_ENA |
+					       PCR_IRQ_POLAR);
+
+				/* CTR bit 5 controls direction of port */
+				ns87303_modify(config, PTR,
+					       0, PTR_LPT_REG_DIR);
+
+				if (parport_pc_probe_port(base, base + 0x400,
+							  edev->irqs[0],
+							  count, ebus->self))
+					count++;
+			}
+		}
+	}
+
+	count = parport_isa_probe(count);
+
+	return count;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h
new file mode 100644
index 000000000000..92999631c819
--- /dev/null
+++ b/include/asm-sparc64/pbm.h
@@ -0,0 +1,248 @@
+/* $Id: pbm.h,v 1.27 2001/08/12 13:18:23 davem Exp $
+ * pbm.h: UltraSparc PCI controller software state.
+ *
+ * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_PBM_H
+#define __SPARC64_PBM_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/oplib.h>
+
+/* The abstraction used here is that there are PCI controllers,
+ * each with one (Sabre) or two (PSYCHO/SCHIZO) PCI bus modules
+ * underneath.  Each PCI bus module uses an IOMMU (shared by both
+ * PBMs of a controller, or per-PBM), and if a streaming buffer
+ * is present, each PCI bus module has it's own. (ie. the IOMMU
+ * might be shared between PBMs, the STC is never shared)
+ * Furthermore, each PCI bus module controls it's own autonomous
+ * PCI bus.
+ */
+
+#define PBM_LOGCLUSTERS 3
+#define PBM_NCLUSTERS (1 << PBM_LOGCLUSTERS)
+
+struct pci_controller_info;
+
+/* This contains the software state necessary to drive a PCI
+ * controller's IOMMU.
+ */
+struct pci_iommu {
+	/* This protects the controller's IOMMU and all
+	 * streaming buffers underneath.
+	 */
+	spinlock_t	lock;
+
+	/* Context allocator. */
+	unsigned int	iommu_cur_ctx;
+
+	/* IOMMU page table, a linear array of ioptes. */
+	iopte_t		*page_table;		/* The page table itself. */
+	int		page_table_sz_bits;	/* log2 of ow many pages does it map? */
+
+	/* Base PCI memory space address where IOMMU mappings
+	 * begin.
+	 */
+	u32		page_table_map_base;
+
+	/* IOMMU Controller Registers */
+	unsigned long	iommu_control;		/* IOMMU control register */
+	unsigned long	iommu_tsbbase;		/* IOMMU page table base register */
+	unsigned long	iommu_flush;		/* IOMMU page flush register */
+	unsigned long	iommu_ctxflush;		/* IOMMU context flush register */
+
+	/* This is a register in the PCI controller, which if
+	 * read will have no side-effects but will guarantee
+	 * completion of all previous writes into IOMMU/STC.
+	 */
+	unsigned long	write_complete_reg;
+
+	/* The lowest used consistent mapping entry.  Since
+	 * we allocate consistent maps out of cluster 0 this
+	 * is relative to the beginning of closter 0.
+	 */
+	u32		lowest_consistent_map;
+
+	/* In order to deal with some buggy third-party PCI bridges that
+	 * do wrong prefetching, we never mark valid mappings as invalid.
+	 * Instead we point them at this dummy page.
+	 */
+	unsigned long	dummy_page;
+	unsigned long	dummy_page_pa;
+
+	/* If PBM_NCLUSTERS is ever decreased to 4 or lower,
+	 * or if largest supported page_table_sz * 8K goes above
+	 * 2GB, you must increase the size of the type of
+	 * these counters.  You have been duly warned. -DaveM
+	 */
+	struct {
+		u16	next;
+		u16	flush;
+	} alloc_info[PBM_NCLUSTERS];
+
+	/* Here a PCI controller driver describes the areas of
+	 * PCI memory space where DMA to/from physical memory
+	 * are addressed.  Drivers interrogate the PCI layer
+	 * if their device has addressing limitations.  They
+	 * do so via pci_dma_supported, and pass in a mask of
+	 * DMA address bits their device can actually drive.
+	 *
+	 * The test for being usable is:
+	 * 	(device_mask & dma_addr_mask) == dma_addr_mask
+	 */
+	u32 dma_addr_mask;
+};
+
+extern void pci_iommu_table_init(struct pci_iommu *, int);
+
+/* This describes a PCI bus module's streaming buffer. */
+struct pci_strbuf {
+	int		strbuf_enabled;		/* Present and using it? */
+
+	/* Streaming Buffer Control Registers */
+	unsigned long	strbuf_control;		/* STC control register */
+	unsigned long	strbuf_pflush;		/* STC page flush register */
+	unsigned long	strbuf_fsync;		/* STC flush synchronization reg */
+	unsigned long	strbuf_ctxflush;	/* STC context flush register */
+	unsigned long	strbuf_ctxmatch_base;	/* STC context flush match reg */
+	unsigned long	strbuf_flushflag_pa;	/* Physical address of flush flag */
+	volatile unsigned long *strbuf_flushflag; /* The flush flag itself */
+
+	/* And this is the actual flush flag area.
+	 * We allocate extra because the chips require
+	 * a 64-byte aligned area.
+	 */
+	volatile unsigned long	__flushflag_buf[(64 + (64 - 1)) / sizeof(long)];
+};
+
+#define PCI_STC_FLUSHFLAG_INIT(STC) \
+	(*((STC)->strbuf_flushflag) = 0UL)
+#define PCI_STC_FLUSHFLAG_SET(STC) \
+	(*((STC)->strbuf_flushflag) != 0UL)
+
+/* There can be quite a few ranges and interrupt maps on a PCI
+ * segment.  Thus...
+ */
+#define PROM_PCIRNG_MAX		64
+#define PROM_PCIIMAP_MAX	64
+
+struct pci_pbm_info {
+	/* PCI controller we sit under. */
+	struct pci_controller_info	*parent;
+
+	/* Physical address base of controller registers. */
+	unsigned long			controller_regs;
+
+	/* Physical address base of PBM registers. */
+	unsigned long			pbm_regs;
+
+	/* Opaque 32-bit system bus Port ID. */
+	u32				portid;
+
+	/* Chipset version information. */
+	int				chip_type;
+#define PBM_CHIP_TYPE_SABRE		1
+#define PBM_CHIP_TYPE_PSYCHO		2
+#define PBM_CHIP_TYPE_SCHIZO		3
+#define PBM_CHIP_TYPE_SCHIZO_PLUS	4
+#define PBM_CHIP_TYPE_TOMATILLO		5
+	int				chip_version;
+	int				chip_revision;
+
+	/* Name used for top-level resources. */
+	char				name[64];
+
+	/* OBP specific information. */
+	int				prom_node;
+	char				prom_name[64];
+	struct linux_prom_pci_ranges	pbm_ranges[PROM_PCIRNG_MAX];
+	int				num_pbm_ranges;
+	struct linux_prom_pci_intmap	pbm_intmap[PROM_PCIIMAP_MAX];
+	int				num_pbm_intmap;
+	struct linux_prom_pci_intmask	pbm_intmask;
+	u64				ino_bitmap;
+
+	/* PBM I/O and Memory space resources. */
+	struct resource			io_space;
+	struct resource			mem_space;
+
+	/* Base of PCI Config space, can be per-PBM or shared. */
+	unsigned long			config_space;
+
+	/* State of 66MHz capabilities on this PBM. */
+	int				is_66mhz_capable;
+	int				all_devs_66mhz;
+
+	/* This PBM's streaming buffer. */
+	struct pci_strbuf		stc;
+
+	/* IOMMU state, potentially shared by both PBM segments. */
+	struct pci_iommu		*iommu;
+
+	/* PCI slot mapping. */
+	unsigned int			pci_first_slot;
+
+	/* Now things for the actual PCI bus probes. */
+	unsigned int			pci_first_busno;
+	unsigned int			pci_last_busno;
+	struct pci_bus			*pci_bus;
+};
+
+struct pci_controller_info {
+	/* List of all PCI controllers. */
+	struct pci_controller_info	*next;
+
+	/* Each controller gets a unique index, used mostly for
+	 * error logging purposes.
+	 */
+	int				index;
+
+	/* Do the PBMs both exist in the same PCI domain? */
+	int				pbms_same_domain;
+
+	/* The PCI bus modules controlled by us. */
+	struct pci_pbm_info		pbm_A;
+	struct pci_pbm_info		pbm_B;
+
+	/* Operations which are controller specific. */
+	void (*scan_bus)(struct pci_controller_info *);
+	unsigned int (*irq_build)(struct pci_pbm_info *, struct pci_dev *, unsigned int);
+	void (*base_address_update)(struct pci_dev *, int);
+	void (*resource_adjust)(struct pci_dev *, struct resource *, struct resource *);
+
+	/* Now things for the actual PCI bus probes. */
+	struct pci_ops			*pci_ops;
+	unsigned int			pci_first_busno;
+	unsigned int			pci_last_busno;
+
+	void				*starfire_cookie;
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+	struct pci_pbm_info		*pbm;
+	char				prom_name[64];
+	int				prom_node;
+	struct linux_prom_pci_registers	prom_regs[PROMREG_MAX];
+	int num_prom_regs;
+	struct linux_prom_pci_registers prom_assignments[PROMREG_MAX];
+	int num_prom_assignments;
+};
+
+/* Currently these are the same across all PCI controllers
+ * we support.  Someday they may not be...
+ */
+#define PCI_IRQ_IGN	0x000007c0	/* Interrupt Group Number */
+#define PCI_IRQ_INO	0x0000003f	/* Interrupt Number */
+
+#endif /* !(__SPARC64_PBM_H) */
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
new file mode 100644
index 000000000000..2a0c85cd1c11
--- /dev/null
+++ b/include/asm-sparc64/pci.h
@@ -0,0 +1,264 @@
+#ifndef __SPARC64_PCI_H
+#define __SPARC64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+
+/* The PCI address space does not equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings associated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* No highmem on sparc64, plus we have an IOMMU, so mapping pages is easy. */
+#define pci_map_page(dev, page, off, size, dir) \
+	pci_map_single(dev, (page_address(page) + (off)), size, dir)
+#define pci_unmap_page(dev,addr,sz,dir) pci_unmap_single(dev,addr,sz,dir)
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+		      int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+			 int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the
+ * device again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+					size_t size, int direction);
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+			       size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+	BUG_ON(direction == PCI_DMA_NONE);
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+			int nelems, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+	BUG_ON(direction == PCI_DMA_NONE);
+}
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* PCI IOMMU mapping bypass support. */
+
+/* PCI 64-bit addressing works for all slots on all controller
+ * types on sparc64.  However, it requires that the device
+ * can drive enough of the 64 bits.
+ */
+#define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
+#define PCI64_ADDR_BASE		0xfffc000000000000UL
+
+/* Usage of the pci_dac_foo interfaces is only valid if this
+ * test passes.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) \
+	((((mask) & PCI64_REQUIRED_MASK) == PCI64_REQUIRED_MASK) ? 1 : 0)
+
+static inline dma64_addr_t
+pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
+{
+	return (PCI64_ADDR_BASE +
+		__pa(page_address(page)) + offset);
+}
+
+static inline struct page *
+pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	unsigned long paddr = (dma_addr & PAGE_MASK) - PCI64_ADDR_BASE;
+
+	return virt_to_page(__va(paddr));
+}
+
+static inline unsigned long
+pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	return (dma_addr & ~PAGE_MASK);
+}
+
+static inline void
+pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+	/* DAC cycle addressing does not make use of the
+	 * PCI controller's streaming cache, so nothing to do.
+	 */
+}
+
+static inline void
+pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+	/* DAC cycle addressing does not make use of the
+	 * PCI controller's streaming cache, so nothing to do.
+	 */
+}
+
+#define PCI_DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+/* Return the index of the PCI controller for device PDEV. */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/* Platform support for /proc/bus/pci/X/Y mmap()s. */
+
+#define HAVE_PCI_MMAP
+#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
+#define get_pci_unmapped_area get_fb_unmapped_area
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+/* Platform specific MWI support. */
+#define HAVE_ARCH_PCI_MWI
+extern int pcibios_prep_mwi(struct pci_dev *dev);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return PCI_IRQ_NONE;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC64_PCI_H */
diff --git a/include/asm-sparc64/pconf.h b/include/asm-sparc64/pconf.h
new file mode 100644
index 000000000000..aad106a70908
--- /dev/null
+++ b/include/asm-sparc64/pconf.h
@@ -0,0 +1,25 @@
+/* $Id: pconf.h,v 1.1 1996/12/02 00:09:10 davem Exp $
+ * pconf.h: pathconf() and fpathconf() defines for SunOS
+ *          system call compatibility.
+ *
+ * Copyright (C) 1995, 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_PCONF_H
+#define _SPARC64_PCONF_H
+
+#include <linux/fs.h>
+#include <linux/limits.h>
+
+#define _PCONF_LINK       1 /* Max number of links to an object        */
+#define _PCONF_CANON      2 /* TTY input buffer line size              */
+#define _PCONF_INPUT      3 /* Biggest packet a tty can imbibe at once */
+#define _PCONF_NAME       4 /* Filename length max                     */
+#define _PCONF_PATH       5 /* Max size of a pathname                  */
+#define _PCONF_PIPE       6 /* Buffer size for a pipe                  */
+#define _PCONF_CHRESTRICT 7 /* Can only root chown files?              */
+#define _PCONF_NOTRUNC    8 /* Are pathnames truncated if too big?     */
+#define _PCONF_VDISABLE   9 /* Magic char to disable special tty chars */
+#define _PCONF_MAXPCONF   9
+
+#endif /* !(_SPARC64_PCONF_H) */
diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h
new file mode 100644
index 000000000000..aea4e51e7cd1
--- /dev/null
+++ b/include/asm-sparc64/percpu.h
@@ -0,0 +1,49 @@
+#ifndef __ARCH_SPARC64_PERCPU__
+#define __ARCH_SPARC64_PERCPU__
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_SMP
+
+extern void setup_per_cpu_areas(void);
+
+extern unsigned long __per_cpu_base;
+extern unsigned long __per_cpu_shift;
+#define __per_cpu_offset(__cpu) \
+	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
+
+register unsigned long __local_per_cpu_offset asm("g5");
+
+/* var is in discarded region: offset to particular copy we want */
+#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size)			\
+do {								\
+	unsigned int __i;					\
+	for (__i = 0; __i < NR_CPUS; __i++)			\
+		if (cpu_possible(__i))				\
+			memcpy((pcpudst)+__per_cpu_offset(__i),	\
+			       (src), (size));			\
+} while (0)
+#else /* ! SMP */
+
+#define DEFINE_PER_CPU(type, name) \
+    __typeof__(type) per_cpu__##name
+
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var)			per_cpu__##var
+
+#endif	/* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/include/asm-sparc64/perfctr.h b/include/asm-sparc64/perfctr.h
new file mode 100644
index 000000000000..836873002b75
--- /dev/null
+++ b/include/asm-sparc64/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+	/* Enable UltraSparc performance counters, ARG0 is pointer
+	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+	 * the initial PCR register value to use.
+	 */
+	PERFCTR_ON,
+
+	/* Disable UltraSparc performance counters.  The PCR is written
+	 * with zero and the user counter accumulator pointers and
+	 * working PCR register value are forgotten.
+	 */
+	PERFCTR_OFF,
+
+	/* Add current D0 and D1 PIC values into user pointers given
+	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
+	 */
+	PERFCTR_READ,
+
+	/* Clear the PIC register. */
+	PERFCTR_CLRPIC,
+
+	/* Begin using a new PCR value, the pointer to which is passed
+	 * in ARG0.  The PIC is also cleared after the new PCR value is
+	 * written.
+	 */
+	PERFCTR_SETPCR,
+
+	/* Store in pointer given in ARG0 the current PCR register value
+	 * being used.
+	 */
+	PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT	      	0x00000000
+#define  US3_INSTR_CNT	      	0x00000010
+#define  US3_DISPATCH0_IC_MISS	0x00000020
+#define  US3_DISPATCH0_BR_TGT	0x00000030
+#define  US3_DISPATCH0_2ND_BR	0x00000040
+#define  US3_RSTALL_STOREQ	0x00000050
+#define  US3_RSTALL_IU_USE	0x00000060
+#define  US3_IC_REF		0x00000080
+#define  US3_DC_RD		0x00000090
+#define  US3_DC_WR		0x000000a0
+#define  US3_EC_REF		0x000000c0
+#define  US3_EC_WR_HIT_RTO	0x000000d0
+#define  US3_EC_SNOOP_INV	0x000000e0
+#define  US3_EC_RD_MISS		0x000000f0
+#define  US3_PC_PORT0_RD	0x00000100
+#define  US3_SI_SNOOP		0x00000110
+#define  US3_SI_CIQ_FLOW	0x00000120
+#define  US3_SI_OWNED		0x00000130
+#define  US3_SW_COUNT_0		0x00000140
+#define  US3_IU_BR_MISS_TAKEN	0x00000150
+#define  US3_IU_BR_COUNT_TAKEN	0x00000160
+#define  US3_DISP_RS_MISPRED	0x00000170
+#define  US3_FA_PIPE_COMPL	0x00000180
+#define  US3_MC_READS_0		0x00000200
+#define  US3_MC_READS_1		0x00000210
+#define  US3_MC_READS_2		0x00000220
+#define  US3_MC_READS_3		0x00000230
+#define  US3_MC_STALLS_0	0x00000240
+#define  US3_MC_STALLS_2	0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1	0x00000000
+#define  US3_INSTR_CNT_D1	0x00000800
+#define  US3_DISPATCH0_MISPRED	0x00001000
+#define  US3_IC_MISS_CANCELLED	0x00001800
+#define  US3_RE_ENDIAN_MISS	0x00002000
+#define  US3_RE_FPU_BYPASS	0x00002800
+#define  US3_RE_DC_MISS		0x00003000
+#define  US3_RE_EC_MISS		0x00003800
+#define  US3_IC_MISS		0x00004000
+#define  US3_DC_RD_MISS		0x00004800
+#define  US3_DC_WR_MISS		0x00005000
+#define  US3_RSTALL_FP_USE	0x00005800
+#define  US3_EC_MISSES		0x00006000
+#define  US3_EC_WB		0x00006800
+#define  US3_EC_SNOOP_CB	0x00007000
+#define  US3_EC_IC_MISS		0x00007800
+#define  US3_RE_PC_MISS		0x00008000
+#define  US3_ITLB_MISS		0x00008800
+#define  US3_DTLB_MISS		0x00009000
+#define  US3_WC_MISS		0x00009800
+#define  US3_WC_SNOOP_CB	0x0000a000
+#define  US3_WC_SCRUBBED	0x0000a800
+#define  US3_WC_WB_WO_READ	0x0000b000
+#define  US3_PC_SOFT_HIT	0x0000c000
+#define  US3_PC_SNOOP_INV	0x0000c800
+#define  US3_PC_HARD_HIT	0x0000d000
+#define  US3_PC_PORT1_RD	0x0000d800
+#define  US3_SW_COUNT_1		0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
+#define  US3_PC_MS_MISSES	0x0000f800
+#define  US3_MC_WRITES_0	0x00010800
+#define  US3_MC_WRITES_1	0x00011000
+#define  US3_MC_WRITES_2	0x00011800
+#define  US3_MC_WRITES_3	0x00012000
+#define  US3_MC_STALLS_1	0x00012800
+#define  US3_MC_STALLS_3	0x00013000
+#define  US3_RE_RAW_MISS	0x00013800
+#define  US3_FM_PIPE_COMPLETION	0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
new file mode 100644
index 000000000000..2c28e1f605b7
--- /dev/null
+++ b/include/asm-sparc64/pgalloc.h
@@ -0,0 +1,188 @@
+/* $Id: pgalloc.h,v 1.30 2001/12/21 04:56:17 davem Exp $ */
+#ifndef _SPARC64_PGALLOC_H
+#define _SPARC64_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/spitfire.h>
+#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+/* Page table allocation/freeing. */
+#ifdef CONFIG_SMP
+/* Sliiiicck */
+#define pgt_quicklists	local_cpu_data()
+#else
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache[2];
+	unsigned int pgcache_size;
+} pgt_quicklists;
+#endif
+#define pgd_quicklist		(pgt_quicklists.pgd_cache)
+#define pmd_quicklist		((unsigned long *)0)
+#define pte_quicklist		(pgt_quicklists.pte_cache)
+#define pgtable_cache_size	(pgt_quicklists.pgcache_size)
+
+static __inline__ void free_pgd_fast(pgd_t *pgd)
+{
+	preempt_disable();
+	*(unsigned long *)pgd = (unsigned long) pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	pgtable_cache_size++;
+	preempt_enable();
+}
+
+static __inline__ pgd_t *get_pgd_fast(void)
+{
+	unsigned long *ret;
+
+	preempt_disable();
+	if((ret = pgd_quicklist) != NULL) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+		preempt_enable();
+	} else {
+		preempt_enable();
+		ret = (unsigned long *) __get_free_page(GFP_KERNEL|__GFP_REPEAT);
+		if(ret)
+			memset(ret, 0, PAGE_SIZE);
+	}
+	return (pgd_t *)ret;
+}
+
+static __inline__ void free_pgd_slow(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define VPTE_COLOR(address)		(((address) >> (PAGE_SHIFT + 10)) & 1UL)
+#define DCACHE_COLOR(address)		(((address) >> PAGE_SHIFT) & 1UL)
+#else
+#define VPTE_COLOR(address)		0
+#define DCACHE_COLOR(address)		0
+#endif
+
+#define pud_populate(MM, PUD, PMD)	pud_set(PUD, PMD)
+
+static __inline__ pmd_t *pmd_alloc_one_fast(struct mm_struct *mm, unsigned long address)
+{
+	unsigned long *ret;
+	int color = 0;
+
+	preempt_disable();
+	if (pte_quicklist[color] == NULL)
+		color = 1;
+
+	if((ret = (unsigned long *)pte_quicklist[color]) != NULL) {
+		pte_quicklist[color] = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	}
+	preempt_enable();
+
+	return (pmd_t *)ret;
+}
+
+static __inline__ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd;
+
+	pmd = pmd_alloc_one_fast(mm, address);
+	if (!pmd) {
+		pmd = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+		if (pmd)
+			memset(pmd, 0, PAGE_SIZE);
+	}
+	return pmd;
+}
+
+static __inline__ void free_pmd_fast(pmd_t *pmd)
+{
+	unsigned long color = DCACHE_COLOR((unsigned long)pmd);
+
+	preempt_disable();
+	*(unsigned long *)pmd = (unsigned long) pte_quicklist[color];
+	pte_quicklist[color] = (unsigned long *) pmd;
+	pgtable_cache_size++;
+	preempt_enable();
+}
+
+static __inline__ void free_pmd_slow(pmd_t *pmd)
+{
+	free_page((unsigned long)pmd);
+}
+
+#define pmd_populate_kernel(MM, PMD, PTE)	pmd_set(PMD, PTE)
+#define pmd_populate(MM,PMD,PTE_PAGE)		\
+	pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+
+extern pte_t *__pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address);
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	return __pte_alloc_one_kernel(mm, address);
+}
+
+static inline struct page *
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = __pte_alloc_one_kernel(mm, addr);
+
+	if (pte)
+		return virt_to_page(pte);
+
+	return NULL;
+}
+
+static __inline__ pte_t *pte_alloc_one_fast(struct mm_struct *mm, unsigned long address)
+{
+	unsigned long color = VPTE_COLOR(address);
+	unsigned long *ret;
+
+	preempt_disable();
+	if((ret = (unsigned long *)pte_quicklist[color]) != NULL) {
+		pte_quicklist[color] = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	}
+	preempt_enable();
+	return (pte_t *)ret;
+}
+
+static __inline__ void free_pte_fast(pte_t *pte)
+{
+	unsigned long color = DCACHE_COLOR((unsigned long)pte);
+
+	preempt_disable();
+	*(unsigned long *)pte = (unsigned long) pte_quicklist[color];
+	pte_quicklist[color] = (unsigned long *) pte;
+	pgtable_cache_size++;
+	preempt_enable();
+}
+
+static __inline__ void free_pte_slow(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_pte_fast(pte);
+}
+
+static inline void pte_free(struct page *ptepage)
+{
+	free_pte_fast(page_address(ptepage));
+}
+
+#define pmd_free(pmd)		free_pmd_fast(pmd)
+#define pgd_free(pgd)		free_pgd_fast(pgd)
+#define pgd_alloc(mm)		get_pgd_fast()
+
+#endif /* _SPARC64_PGALLOC_H */
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
new file mode 100644
index 000000000000..ca04ac105b69
--- /dev/null
+++ b/include/asm-sparc64/pgtable.h
@@ -0,0 +1,464 @@
+/* $Id: pgtable.h,v 1.156 2002/02/09 19:49:31 davem Exp $
+ * pgtable.h: SpitFire page table operations.
+ *
+ * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC64_PGTABLE_H
+#define _SPARC64_PGTABLE_H
+
+/* This file contains the functions and defines necessary to modify and use
+ * the SpitFire page tables.
+ */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/types.h>
+#include <asm/spitfire.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/const.h>
+
+/* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 16MB).
+ * The page copy blockops use 0x1000000 to 0x18000000 (16MB --> 24MB).
+ * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
+ * The vmalloc area spans 0x140000000 to 0x200000000.
+ * There is a single static kernel PMD which maps from 0x0 to address
+ * 0x400000000.
+ */
+#define	TLBTEMP_BASE		_AC(0x0000000001000000,UL)
+#define MODULES_VADDR		_AC(0x0000000002000000,UL)
+#define MODULES_LEN		_AC(0x000000007e000000,UL)
+#define MODULES_END		_AC(0x0000000080000000,UL)
+#define VMALLOC_START		_AC(0x0000000140000000,UL)
+#define VMALLOC_END		_AC(0x0000000200000000,UL)
+#define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
+#define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
+
+/* XXX All of this needs to be rethought so we can take advantage
+ * XXX cheetah's full 64-bit virtual address space, ie. no more hole
+ * XXX in the middle like on spitfire. -DaveM
+ */
+/*
+ * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
+ * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
+ * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
+ * table is a single page long). The next higher PMD_BITS determine pmd# 
+ * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2) 
+ * since the pmd entries are 4 bytes, and each pmd page is a single page 
+ * long). Finally, the higher few bits determine pgde#.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PMD_BITS	(PAGE_SHIFT - 2)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PGDIR_BITS	(PAGE_SHIFT - 2)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+/* Entries per page directory level. */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << PMD_BITS)
+#define PTRS_PER_PGD	(1UL << PGDIR_BITS)
+
+/* Kernel has a separate 44bit address space. */
+#define FIRST_USER_PGD_NR	0
+
+#define pte_ERROR(e)	__builtin_trap()
+#define pmd_ERROR(e)	__builtin_trap()
+#define pgd_ERROR(e)	__builtin_trap()
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Spitfire/Cheetah TTE bits. */
+#define _PAGE_VALID	_AC(0x8000000000000000,UL) /* Valid TTE              */
+#define _PAGE_R		_AC(0x8000000000000000,UL) /* Keep ref bit up to date*/
+#define _PAGE_SZ4MB	_AC(0x6000000000000000,UL) /* 4MB Page               */
+#define _PAGE_SZ512K	_AC(0x4000000000000000,UL) /* 512K Page              */
+#define _PAGE_SZ64K	_AC(0x2000000000000000,UL) /* 64K Page               */
+#define _PAGE_SZ8K	_AC(0x0000000000000000,UL) /* 8K Page                */
+#define _PAGE_NFO	_AC(0x1000000000000000,UL) /* No Fault Only          */
+#define _PAGE_IE	_AC(0x0800000000000000,UL) /* Invert Endianness      */
+#define _PAGE_SOFT2	_AC(0x07FC000000000000,UL) /* Software bits, set 2   */
+#define _PAGE_RES1	_AC(0x0003000000000000,UL) /* Reserved               */
+#define _PAGE_SN	_AC(0x0000800000000000,UL) /* (Cheetah) Snoop        */
+#define _PAGE_RES2	_AC(0x0000780000000000,UL) /* Reserved               */
+#define _PAGE_PADDR_SF	_AC(0x000001FFFFFFE000,UL) /* (Spitfire) paddr[40:13]*/
+#define _PAGE_PADDR	_AC(0x000007FFFFFFE000,UL) /* (Cheetah) paddr[42:13] */
+#define _PAGE_SOFT	_AC(0x0000000000001F80,UL) /* Software bits          */
+#define _PAGE_L		_AC(0x0000000000000040,UL) /* Locked TTE             */
+#define _PAGE_CP	_AC(0x0000000000000020,UL) /* Cacheable in P-Cache   */
+#define _PAGE_CV	_AC(0x0000000000000010,UL) /* Cacheable in V-Cache   */
+#define _PAGE_E		_AC(0x0000000000000008,UL) /* side-Effect            */
+#define _PAGE_P		_AC(0x0000000000000004,UL) /* Privileged Page        */
+#define _PAGE_W		_AC(0x0000000000000002,UL) /* Writable               */
+#define _PAGE_G		_AC(0x0000000000000001,UL) /* Global                 */
+
+/* Here are the SpitFire software bits we use in the TTE's.
+ *
+ * WARNING: If you are going to try and start using some
+ *          of the soft2 bits, you will need to make
+ *          modifications to the swap entry implementation.
+ *	    For example, one thing that could happen is that
+ *          swp_entry_to_pte() would BUG_ON() if you tried
+ *          to use one of the soft2 bits for _PAGE_FILE.
+ *
+ * Like other architectures, I have aliased _PAGE_FILE with
+ * _PAGE_MODIFIED.  This works because _PAGE_FILE is never
+ * interpreted that way unless _PAGE_PRESENT is clear.
+ */
+#define _PAGE_EXEC	_AC(0x0000000000001000,UL)	/* Executable SW bit */
+#define _PAGE_MODIFIED	_AC(0x0000000000000800,UL)	/* Modified (dirty)  */
+#define _PAGE_FILE	_AC(0x0000000000000800,UL)	/* Pagecache page    */
+#define _PAGE_ACCESSED	_AC(0x0000000000000400,UL)	/* Accessed (ref'd)  */
+#define _PAGE_READ	_AC(0x0000000000000200,UL)	/* Readable SW Bit   */
+#define _PAGE_WRITE	_AC(0x0000000000000100,UL)	/* Writable SW Bit   */
+#define _PAGE_PRESENT	_AC(0x0000000000000080,UL)	/* Present           */
+
+#if PAGE_SHIFT == 13
+#define _PAGE_SZBITS	_PAGE_SZ8K
+#elif PAGE_SHIFT == 16
+#define _PAGE_SZBITS	_PAGE_SZ64K
+#elif PAGE_SHIFT == 19
+#define _PAGE_SZBITS	_PAGE_SZ512K
+#elif PAGE_SHIFT == 22
+#define _PAGE_SZBITS	_PAGE_SZ4MB
+#else
+#error Wrong PAGE_SHIFT specified
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define _PAGE_SZHUGE	_PAGE_SZ4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define _PAGE_SZHUGE	_PAGE_SZ512K
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	_PAGE_SZ64K
+#endif
+
+#define _PAGE_CACHE	(_PAGE_CP | _PAGE_CV)
+
+#define __DIRTY_BITS	(_PAGE_MODIFIED | _PAGE_WRITE | _PAGE_W)
+#define __ACCESS_BITS	(_PAGE_ACCESSED | _PAGE_READ | _PAGE_R)
+#define __PRIV_BITS	_PAGE_P
+
+#define PAGE_NONE	__pgprot (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_CACHE)
+
+/* Don't set the TTE _PAGE_W bit here, else the dirty bit never gets set. */
+#define PAGE_SHARED	__pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \
+				  __ACCESS_BITS | _PAGE_WRITE | _PAGE_EXEC)
+
+#define PAGE_COPY	__pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \
+				  __ACCESS_BITS | _PAGE_EXEC)
+
+#define PAGE_READONLY	__pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \
+				  __ACCESS_BITS | _PAGE_EXEC)
+
+#define PAGE_KERNEL	__pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \
+				  __PRIV_BITS | \
+				  __ACCESS_BITS | __DIRTY_BITS | _PAGE_EXEC)
+
+#define PAGE_SHARED_NOEXEC	__pgprot (_PAGE_PRESENT | _PAGE_VALID | \
+					  _PAGE_CACHE | \
+					  __ACCESS_BITS | _PAGE_WRITE)
+
+#define PAGE_COPY_NOEXEC	__pgprot (_PAGE_PRESENT | _PAGE_VALID | \
+					  _PAGE_CACHE | __ACCESS_BITS)
+
+#define PAGE_READONLY_NOEXEC	__pgprot (_PAGE_PRESENT | _PAGE_VALID | \
+					  _PAGE_CACHE | __ACCESS_BITS)
+
+#define _PFN_MASK	_PAGE_PADDR
+
+#define pg_iobits (_PAGE_VALID | _PAGE_PRESENT | __DIRTY_BITS | \
+		   __ACCESS_BITS | _PAGE_E)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_NOEXEC
+#define __P010	PAGE_COPY_NOEXEC
+#define __P011	PAGE_COPY_NOEXEC
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_NOEXEC
+#define __S010	PAGE_SHARED_NOEXEC
+#define __S011	PAGE_SHARED_NOEXEC
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+extern struct page *mem_map_zero;
+#define ZERO_PAGE(vaddr)	(mem_map_zero)
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+
+#define pfn_pte(pfn, prot)	\
+	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot) | _PAGE_SZBITS)
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+#define pte_pfn(x)		((pte_val(x) & _PAGE_PADDR)>>PAGE_SHIFT)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define page_pte_prot(page, prot)	mk_pte(page, prot)
+#define page_pte(page)			page_pte_prot(page, __pgprot(0))
+
+static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot)
+{
+	pte_t __pte;
+	const unsigned long preserve_mask = (_PFN_MASK |
+					     _PAGE_MODIFIED | _PAGE_ACCESSED |
+					     _PAGE_CACHE | _PAGE_E |
+					     _PAGE_PRESENT | _PAGE_SZBITS);
+
+	pte_val(__pte) = (pte_val(orig_pte) & preserve_mask) |
+		(pgprot_val(new_prot) & ~preserve_mask);
+
+	return __pte;
+}
+#define pmd_set(pmdp, ptep)	\
+	(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
+#define pud_set(pudp, pmdp)	\
+	(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
+#define __pmd_page(pmd)		\
+	((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
+#define pmd_page(pmd) 			virt_to_page((void *)__pmd_page(pmd))
+#define pud_page(pud)		\
+	((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
+#define pte_none(pte) 			(!pte_val(pte))
+#define pte_present(pte)		(pte_val(pte) & _PAGE_PRESENT)
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(0)
+#define pmd_present(pmd)		(pmd_val(pmd) != 0U)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0U)
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(0)
+#define pud_present(pud)		(pud_val(pud) != 0U)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0U)
+
+/* The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_read(pte)		(pte_val(pte) & _PAGE_READ)
+#define pte_exec(pte)		(pte_val(pte) & _PAGE_EXEC)
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_MODIFIED)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~(_PAGE_WRITE|_PAGE_W)))
+#define pte_rdprotect(pte)	\
+	(__pte(((pte_val(pte)<<1UL)>>1UL) & ~_PAGE_READ))
+#define pte_mkclean(pte)	\
+	(__pte(pte_val(pte) & ~(_PAGE_MODIFIED|_PAGE_W)))
+#define pte_mkold(pte)		\
+	(__pte(((pte_val(pte)<<1UL)>>1UL) & ~_PAGE_ACCESSED))
+
+/* Permanent address of a page. */
+#define __page_address(page)	page_address(page)
+
+/* Be very careful when you change these three, they are delicate. */
+#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_ACCESSED | _PAGE_R))
+#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_WRITE))
+#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_MODIFIED | _PAGE_W))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* extract the pgd cache used for optimizing the tlb miss
+ * slow path when executing 32-bit compat processes
+ */
+#define get_pgd_cache(pgd)	((unsigned long) pgd_val(*pgd) << 11)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pudp, address)	\
+	((pmd_t *) pud_page(*(pudp)) + \
+	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(dir, address)	\
+	((pte_t *) __pmd_page(*(dir)) + \
+	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_kernel		pte_index
+#define pte_offset_map			pte_index
+#define pte_offset_map_nested		pte_index
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* Actual page table PTE updates.  */
+extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+	pte_t orig = *ptep;
+
+	*ptep = pte;
+
+	/* It is more efficient to let flush_tlb_kernel_range()
+	 * handle init_mm tlb flushes.
+	 */
+	if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
+		tlb_batch_add(mm, addr, ptep, orig);
+}
+
+#define pte_clear(mm,addr,ptep)		\
+	set_pte_at((mm), (addr), (ptep), __pte(0UL))
+
+extern pgd_t swapper_pg_dir[1];
+
+/* These do nothing with the way I have things setup. */
+#define mmu_lockarea(vaddr, len)		(vaddr)
+#define mmu_unlockarea(vaddr, len)		do { } while(0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Make a non-present pseudo-TTE. */
+static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
+{
+	pte_t pte;
+	pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
+			~(unsigned long)_PAGE_CACHE);
+	pte_val(pte) |= (((unsigned long)space) << 32);
+	return pte;
+}
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
+#define __swp_offset(entry)	((entry).val >> (PAGE_SHIFT + 8UL))
+#define __swp_entry(type, offset)	\
+	( (swp_entry_t) \
+	  { \
+		(((long)(type) << PAGE_SHIFT) | \
+                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
+	  } )
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* File offset in PTE support. */
+#define pte_file(pte)		(pte_val(pte) & _PAGE_FILE)
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
+#define pgoff_to_pte(off)	(__pte(((off) << PAGE_SHIFT) | _PAGE_FILE))
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
+
+extern unsigned long prom_virt_to_phys(unsigned long, int *);
+
+static __inline__ unsigned long
+sun4u_get_pte (unsigned long addr)
+{
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	if (addr >= PAGE_OFFSET)
+		return addr & _PAGE_PADDR;
+	if ((addr >= LOW_OBP_ADDRESS) && (addr < HI_OBP_ADDRESS))
+		return prom_virt_to_phys(addr, NULL);
+	pgdp = pgd_offset_k(addr);
+	pudp = pud_offset(pgdp, addr);
+	pmdp = pmd_offset(pudp, addr);
+	ptep = pte_offset_kernel(pmdp, addr);
+	return pte_val(*ptep) & _PAGE_PADDR;
+}
+
+static __inline__ unsigned long
+__get_phys (unsigned long addr)
+{
+	return sun4u_get_pte (addr);
+}
+
+static __inline__ int
+__get_iospace (unsigned long addr)
+{
+	return ((sun4u_get_pte (addr) & 0xf0000000) >> 28);
+}
+
+extern unsigned long *sparc64_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	\
+	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+
+extern int io_remap_page_range(struct vm_area_struct *vma, unsigned long from,
+			       unsigned long offset,
+			       unsigned long size, pgprot_t prot, int space);
+extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			       unsigned long pfn,
+			       unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
+
+/* Override for {pgd,pmd}_addr_end() to deal with the virtual address
+ * space hole.  We simply sign extend bit 43.
+ */
+#define pgd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;	\
+	__boundary = ((long) (__boundary << 20)) >> 20;			\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#define pmd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;	\
+	__boundary = ((long) (__boundary << 20)) >> 20;			\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#include <asm-generic/pgtable.h>
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
+ * the largest alignment possible such that larget PTEs can be used.
+ */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+extern void check_pgt_cache(void);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
new file mode 100644
index 000000000000..8f87750c3517
--- /dev/null
+++ b/include/asm-sparc64/pil.h
@@ -0,0 +1,26 @@
+/* $Id: pil.h,v 1.1 2002/01/23 11:27:36 davem Exp $ */
+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A cli() does not block the cross call delivery, so when SMP
+ * locking is an issue we reschedule the event into a PIL interrupt
+ * which is blocked by cli().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC	1
+#define PIL_SMP_RECEIVE_SIGNAL	2
+#define PIL_SMP_CAPTURE		3
+
+#ifndef __ASSEMBLY__
+#define PIL_RESERVED(PIL)	((PIL) == PIL_SMP_CALL_FUNC || \
+				 (PIL) == PIL_SMP_RECEIVE_SIGNAL || \
+				 (PIL) == PIL_SMP_CAPTURE)
+#endif
+
+#endif /* !(_SPARC64_PIL_H) */
diff --git a/include/asm-sparc64/poll.h b/include/asm-sparc64/poll.h
new file mode 100644
index 000000000000..31b611aa7468
--- /dev/null
+++ b/include/asm-sparc64/poll.h
@@ -0,0 +1,23 @@
+#ifndef __SPARC64_POLL_H
+#define __SPARC64_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		512
+#define POLLREMOVE	1024
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
new file mode 100644
index 000000000000..c86b9452c683
--- /dev/null
+++ b/include/asm-sparc64/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef __ARCH_SPARC64_POSIX_TYPES_H
+#define __ARCH_SPARC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long          __kernel_size_t;
+typedef long                   __kernel_ssize_t;
+typedef long                   __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef int                    __kernel_ipc_pid_t;
+typedef unsigned int           __kernel_uid_t;
+typedef unsigned int           __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned int           __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef unsigned int           __kernel_nlink_t;
+typedef int                    __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+typedef unsigned short 	       __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef __kernel_uid_t	       __kernel_uid32_t;
+typedef __kernel_gid_t	       __kernel_gid32_t;
+
+typedef unsigned int	       __kernel_old_dev_t;
+
+/* Note this piece of asymmetry from the v9 ABI.  */
+typedef int		       __kernel_suseconds_t;
+
+#ifdef __GNUC__
+typedef long long              __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
new file mode 100644
index 000000000000..bc1445b904ef
--- /dev/null
+++ b/include/asm-sparc64/processor.h
@@ -0,0 +1,197 @@
+/* $Id: processor.h,v 1.83 2002/02/10 06:04:33 davem Exp $
+ * include/asm-sparc64/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <linux/config.h>
+#include <asm/asi.h>
+#include <asm/a.out.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual 
+ * address that the kernel will allocate out.
+ */
+#define VA_BITS		44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+
+/*
+ * The vpte base must be able to hold the entire vpte, half
+ * of which lives above, and half below, the base. And it
+ * is placed as close to the highest address range as possible.
+ */
+#define VPTE_BASE_SPITFIRE	(-(VPTE_SIZE/2))
+#if 1
+#define VPTE_BASE_CHEETAH	VPTE_BASE_SPITFIRE
+#else
+#define VPTE_BASE_CHEETAH	0xffe0000000000000
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+	/* How many spinlocks held by this thread.
+	 * Used with spin lock debugging to catch tasks
+	 * sleeping illegally with locks held.
+	 */
+	int smp_lock_count;
+	unsigned int smp_lock_pc;
+#else
+	int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {			\
+	0,				\
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {					\
+/* smp_lock_count, smp_lock_pc, */			\
+   0,		   0,					\
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM	TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM	TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (ASI_PNF << 24); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(1 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+	pc &= 0x00000000ffffffffUL; \
+	sp &= 0x00000000ffffffffUL; \
+\
+	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(2 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread_info->kregs->tpc)
+#define KSTK_ESP(tsk)  ((tsk)->thread_info->kregs->u_regs[UREG_FP])
+
+#define cpu_relax()	barrier()
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
new file mode 100644
index 000000000000..5590ce6bd076
--- /dev/null
+++ b/include/asm-sparc64/psrcompat.h
@@ -0,0 +1,44 @@
+/* $Id: psrcompat.h,v 1.5 1998/10/06 09:28:39 jj Exp $ */
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+	return ((tstate & TSTATE_CWP)			|
+		PSR_S					|
+		((tstate & TSTATE_ICC) >> 12)		|
+		((tstate & TSTATE_XCC) >> 20)		|
+		PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+	return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
new file mode 100644
index 000000000000..29fb74aa805d
--- /dev/null
+++ b/include/asm-sparc64/pstate.h
@@ -0,0 +1,90 @@
+/* $Id: pstate.h,v 1.6 1997/06/25 07:39:45 jj Exp $ */
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <asm/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------
+ * |  Resv  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------
+ *  63    40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
+#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
+#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
+#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
+#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
+#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
+#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
+#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
+#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
+#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
+#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
+#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
+#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
+#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
+#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
+#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
+#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
+#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
+#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
+#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
+#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
+#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
+#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
+#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
+#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
+#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
+#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
+#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
+#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
+#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
new file mode 100644
index 000000000000..2d2b5a113d24
--- /dev/null
+++ b/include/asm-sparc64/ptrace.h
@@ -0,0 +1,297 @@
+/* $Id: ptrace.h,v 1.14 2002/02/09 19:49:32 davem Exp $ */
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the 
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long u_regs[16]; /* globals and ins */
+	unsigned long tstate;
+	unsigned long tpc;
+	unsigned long tnpc;
+	unsigned int y;
+	unsigned int fprs;
+};
+
+struct pt_regs32 {
+	unsigned int psr;
+	unsigned int pc;
+	unsigned int npc;
+	unsigned int y;
+	unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+	unsigned int locals[8];
+	unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};	
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+	unsigned int locals[8];
+        unsigned int ins[6];
+	unsigned int fp;
+	unsigned int callers_pc;
+	unsigned int structptr;
+	unsigned int xargs[6];
+	unsigned int xxargs[1];
+};	
+
+struct sparc_trapf {
+	unsigned long locals[8];
+	unsigned long ins[8];
+	unsigned long _unused;
+	struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ	sizeof(struct pt_regs)
+#define STACKFRAME_SZ	sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ	sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+#define force_successful_syscall_return()	\
+	set_thread_flag(TIF_SYSCALL_SUCCESS)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ		0xa0
+#define STACKFRAME_SZ		0xc0
+
+#define TRACEREG32_SZ		0x50
+#define STACKFRAME32_SZ		0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS		2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_FPRS   0x9c
+#define PT_TSTATE	PT_V9_TSTATE
+#define PT_TPC		PT_V9_TPC
+#define PT_TNPC		PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SUNATTACH          10
+#define PTRACE_SUNDETACH          11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64	  25
+#define PTRACE_SETFPREGS64	  26
+
+#define PTRACE_GETUCODE           29  /* stupid bsd-ism */
+
+/* These are for 32-bit processes debugging 64-bit ones.
+ * Here addr and addr2 are passed in %g2 and %g3 respectively.
+ */
+#define PTRACE_PEEKTEXT64         (30 + PTRACE_PEEKTEXT)
+#define PTRACE_POKETEXT64         (30 + PTRACE_POKETEXT)
+#define PTRACE_PEEKDATA64         (30 + PTRACE_PEEKDATA)
+#define PTRACE_POKEDATA64         (30 + PTRACE_POKEDATA)
+#define PTRACE_READDATA64         (30 + PTRACE_READDATA)
+#define PTRACE_WRITEDATA64        (30 + PTRACE_WRITEDATA)
+#define PTRACE_READTEXT64         (30 + PTRACE_READTEXT)
+#define PTRACE_WRITETEXT64        (30 + PTRACE_WRITETEXT)
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/include/asm-sparc64/reg.h b/include/asm-sparc64/reg.h
new file mode 100644
index 000000000000..fc68f90181b3
--- /dev/null
+++ b/include/asm-sparc64/reg.h
@@ -0,0 +1,56 @@
+/* $Id: reg.h,v 1.6 1999/09/06 08:22:10 jj Exp $
+ * linux/asm-sparc64/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other 
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+	struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/include/asm-sparc64/resource.h b/include/asm-sparc64/resource.h
new file mode 100644
index 000000000000..aa469795a6b0
--- /dev/null
+++ b/include/asm-sparc64/resource.h
@@ -0,0 +1,19 @@
+/* $Id: resource.h,v 1.8 2000/09/23 02:09:21 davem Exp $
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_RESOURCE_H
+#define _SPARC64_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_NPROC		7	/* max number of processes */
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC64_RESOURCE_H) */
diff --git a/include/asm-sparc64/rtc.h b/include/asm-sparc64/rtc.h
new file mode 100644
index 000000000000..cb17334595c9
--- /dev/null
+++ b/include/asm-sparc64/rtc.h
@@ -0,0 +1,27 @@
+/* $Id: rtc.h,v 1.1 1996/12/26 14:22:35 davem Exp $
+ *
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+	int	sec;	/* Seconds (0-59) */
+	int	min;	/* Minutes (0-59) */
+	int	hour;	/* Hour (0-23) */
+	int	dow;	/* Day of the week (1-7) */
+	int	dom;	/* Day of the month (1-31) */
+	int	month;	/* Month of year (1-12) */
+	int	year;	/* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h
new file mode 100644
index 000000000000..a303c9d64d84
--- /dev/null
+++ b/include/asm-sparc64/rwsem-const.h
@@ -0,0 +1,12 @@
+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
new file mode 100644
index 000000000000..bf2ae90ed3df
--- /dev/null
+++ b/include/asm-sparc64/rwsem.h
@@ -0,0 +1,100 @@
+/* $Id: rwsem.h,v 1.5 2001/11/18 00:12:56 davem Exp $
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+	signed int count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static __inline__ void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static __inline__ int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	int tmp = delta;
+
+	__asm__ __volatile__(
+		"1:\tlduw	[%2], %%g1\n\t"
+		"add		%%g1, %1, %%g7\n\t"
+		"cas		[%2], %%g1, %%g7\n\t"
+		"cmp		%%g1, %%g7\n\t"
+		"bne,pn		%%icc, 1b\n\t"
+		" membar	#StoreLoad | #StoreStore\n\t"
+		"mov		%%g7, %0\n\t"
+		: "=&r" (tmp)
+		: "0" (tmp), "r" (sem)
+		: "g1", "g7", "memory", "cc");
+
+	return tmp + delta;
+}
+
+#define rwsem_atomic_add rwsem_atomic_update
+
+static __inline__ __u16 rwsem_cmpxchgw(struct rw_semaphore *sem, __u16 __old, __u16 __new)
+{
+	u32 old = (sem->count & 0xffff0000) | (u32) __old;
+	u32 new = (old & 0xffff0000) | (u32) __new;
+	u32 prev;
+
+again:
+	__asm__ __volatile__("cas	[%2], %3, %0\n\t"
+			     "membar	#StoreLoad | #StoreStore"
+			     : "=&r" (prev)
+			     : "0" (new), "r" (sem), "r" (old)
+			     : "memory");
+
+	/* To give the same semantics as x86 cmpxchgw, keep trying
+	 * if only the upper 16-bits changed.
+	 */
+	if (prev != old &&
+	    ((prev & 0xffff) == (old & 0xffff)))
+		goto again;
+
+	return prev & 0xffff;
+}
+
+static __inline__ signed long rwsem_cmpxchg(struct rw_semaphore *sem, signed long old, signed long new)
+{
+	return cmpxchg(&sem->count,old,new);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */
diff --git a/include/asm-sparc64/sbus.h b/include/asm-sparc64/sbus.h
new file mode 100644
index 000000000000..48279e10f385
--- /dev/null
+++ b/include/asm-sparc64/sbus.h
@@ -0,0 +1,122 @@
+/* $Id: sbus.h,v 1.14 2000/02/18 13:50:55 davem Exp $
+ * sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_SBUS_H
+#define _SPARC64_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/iommu.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0x00000000
+#define SBUS_OFF_MASK          0x0fffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
+}
+
+static __inline__ int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct sbus_bus *bus;	/* Our toplevel parent SBUS	*/
+	struct sbus_dev *next;	/* Chain of siblings		*/
+	struct sbus_dev *child;	/* Chain of children		*/
+	struct sbus_dev *parent;/* Parent device if not toplevel*/
+	int prom_node;		/* OBP node of this device	*/
+	char prom_name[64];	/* OBP device name property	*/
+	int slot;		/* SBUS slot number		*/
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers, ranges_applied;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	void			*iommu;		/* Opaque IOMMU cookie	*/
+	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
+	struct sbus_bus		*next;		/* Next SBUS in system	*/
+	int			prom_node;      /* OBP node of SBUS	*/
+	char			prom_name[64];	/* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int portid;
+	void *starfire_cookie;
+};
+
+extern struct sbus_bus *sbus_root;
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+        
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(1)
+#define sbus_can_burst64(sdev)		(1)
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, size_t, dma_addr_t *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, size_t, void *, dma_addr_t);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+#endif /* !(_SPARC64_SBUS_H) */
diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
new file mode 100644
index 000000000000..ec4f3c63fe98
--- /dev/null
+++ b/include/asm-sparc64/scatterlist.h
@@ -0,0 +1,22 @@
+/* $Id: scatterlist.h,v 1.11 2001/12/17 07:05:15 davem Exp $ */
+#ifndef _SPARC64_SCATTERLIST_H
+#define _SPARC64_SCATTERLIST_H
+
+#include <asm/page.h>
+
+struct scatterlist {
+	struct page	*page;
+	unsigned int	offset;
+
+	unsigned int	length;
+
+	dma_addr_t	dma_address;
+	__u32		dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)     	((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/include/asm-sparc64/sections.h b/include/asm-sparc64/sections.h
new file mode 100644
index 000000000000..3f4b9fdc28d0
--- /dev/null
+++ b/include/asm-sparc64/sections.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC64_SECTIONS_H
+#define _SPARC64_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+extern char _start[];
+
+#endif
diff --git a/include/asm-sparc64/segment.h b/include/asm-sparc64/segment.h
new file mode 100644
index 000000000000..b03e709fc945
--- /dev/null
+++ b/include/asm-sparc64/segment.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC64_SEGMENT_H
+#define __SPARC64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/include/asm-sparc64/semaphore.h b/include/asm-sparc64/semaphore.h
new file mode 100644
index 000000000000..7419dd88b49e
--- /dev/null
+++ b/include/asm-sparc64/semaphore.h
@@ -0,0 +1,57 @@
+#ifndef _SPARC64_SEMAPHORE_H
+#define _SPARC64_SEMAPHORE_H
+
+/* These are actually reasonable on the V9.
+ *
+ * See asm-ppc/semaphore.h for implementation commentary,
+ * only sparc64 specific issues are commented here.
+ */
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+	atomic_t count;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, count) \
+	{ ATOMIC_INIT(count), \
+	  __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name, 1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+	atomic_set(&sem->count, val);
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void up(struct semaphore *sem);
+extern void down(struct semaphore *sem);
+extern int down_trylock(struct semaphore *sem);
+extern int down_interruptible(struct semaphore *sem);
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC64_SEMAPHORE_H) */
diff --git a/include/asm-sparc64/sembuf.h b/include/asm-sparc64/sembuf.h
new file mode 100644
index 000000000000..99f04e4e288c
--- /dev/null
+++ b/include/asm-sparc64/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC64_SEMBUF_H
+#define _SPARC64_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/include/asm-sparc64/setup.h b/include/asm-sparc64/setup.h
new file mode 100644
index 000000000000..b356ee2cda92
--- /dev/null
+++ b/include/asm-sparc64/setup.h
@@ -0,0 +1,10 @@
+/*
+ *	Just a place holder. 
+ */
+
+#ifndef _SPARC64_SETUP_H
+#define _SPARC64_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif /* _SPARC64_SETUP_H */
diff --git a/include/asm-sparc64/sfp-machine.h b/include/asm-sparc64/sfp-machine.h
new file mode 100644
index 000000000000..5015bb8d6c32
--- /dev/null
+++ b/include/asm-sparc64/sfp-machine.h
@@ -0,0 +1,91 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc64 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide_3mul(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1)
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#define FP_ROUNDMODE	((current_thread_info()->xfsr[0] >> 30) & 0x3)
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
+
+#endif
diff --git a/include/asm-sparc64/shmbuf.h b/include/asm-sparc64/shmbuf.h
new file mode 100644
index 000000000000..61c2ef42eba3
--- /dev/null
+++ b/include/asm-sparc64/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC64_SHMBUF_H
+#define _SPARC64_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _SPARC64_SHMBUF_H */
diff --git a/include/asm-sparc64/shmparam.h b/include/asm-sparc64/shmparam.h
new file mode 100644
index 000000000000..8c66fded8a32
--- /dev/null
+++ b/include/asm-sparc64/shmparam.h
@@ -0,0 +1,11 @@
+/* $Id: shmparam.h,v 1.5 2001/09/24 21:17:57 kanoj Exp $ */
+#ifndef _ASMSPARC64_SHMPARAM_H
+#define _ASMSPARC64_SHMPARAM_H
+
+#include <asm/spitfire.h>
+
+#define __ARCH_FORCE_SHMLBA	1
+/* attach addr a multiple of this */
+#define	SHMLBA	((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
+
+#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/include/asm-sparc64/sigcontext.h b/include/asm-sparc64/sigcontext.h
new file mode 100644
index 000000000000..d8073373db8c
--- /dev/null
+++ b/include/asm-sparc64/sigcontext.h
@@ -0,0 +1,88 @@
+/* $Id: sigcontext.h,v 1.12 1999/09/06 08:22:09 jj Exp $ */
+#ifndef __SPARC64_SIGCONTEXT_H
+#define __SPARC64_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
+struct sigcontext32 {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	unsigned sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+#endif
+
+#ifdef __KERNEL__
+
+/* This is what we use for 32bit new non-rt signals. */
+
+typedef struct {
+	struct {
+		unsigned int psr;
+		unsigned int pc;
+		unsigned int npc;
+		unsigned int y;
+		unsigned int u_regs[16]; /* globals and ins */
+	}			si_regs;
+	int			si_mask;
+} __siginfo32_t;
+
+#endif
+
+typedef struct {
+	unsigned   int si_float_regs [64];
+	unsigned   long si_fsr;
+	unsigned   long si_gsr;
+	unsigned   long si_fprs;
+} __siginfo_fpu_t;
+
+/* This is what SunOS doesn't, so we have to write this alone
+   and do it properly. */
+struct sigcontext {
+	/* The size of this array has to match SI_MAX_SIZE from siginfo.h */
+	char			sigc_info[128];
+	struct {
+		unsigned long	u_regs[16]; /* globals and ins */
+		unsigned long	tstate;
+		unsigned long	tpc;
+		unsigned long	tnpc;
+		unsigned int	y;
+		unsigned int	fprs;
+	}			sigc_regs;
+	__siginfo_fpu_t *	sigc_fpu_save;
+	struct {
+		void	*	ss_sp;
+		int		ss_flags;
+		unsigned long	ss_size;
+	}			sigc_stack;
+	unsigned long		sigc_mask;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/include/asm-sparc64/siginfo.h b/include/asm-sparc64/siginfo.h
new file mode 100644
index 000000000000..7160449e7cab
--- /dev/null
+++ b/include/asm-sparc64/siginfo.h
@@ -0,0 +1,35 @@
+#ifndef _SPARC64_SIGINFO_H
+#define _SPARC64_SIGINFO_H
+
+#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+#define __ARCH_SI_BAND_T int
+
+#include <asm-generic/siginfo.h>
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_siginfo;
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
new file mode 100644
index 000000000000..6428e366c38c
--- /dev/null
+++ b/include/asm-sparc64/signal.h
@@ -0,0 +1,276 @@
+/* $Id: signal.h,v 1.9 1999/09/06 08:22:11 jj Exp $ */
+#ifndef _ASMSPARC64_SIGNAL_H
+#define _ASMSPARC64_SIGNAL_H
+
+#include <asm/sigcontext.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/personality.h>
+#include <linux/types.h>
+#include <linux/compat.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG      64
+#define _NSIG_BPW     	64
+#define _NSIG_WORDS   	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG			__NEW_NSIG
+#define __new_sigset_t		sigset_t
+#define __new_sigaction		sigaction
+#define __new_sigaction32	sigaction32
+#define __old_sigset_t		old_sigset_t
+#define __old_sigaction		old_sigaction
+#define __old_sigaction32	old_sigaction32
+#else
+#define _NSIG			__OLD_NSIG
+#define NSIG			_NSIG
+#define __old_sigset_t		sigset_t
+#define __old_sigaction		sigaction
+#define __old_sigaction32	sigaction32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+	/* XXX 32-bit pointers pinhead XXX */
+	char *the_stack;
+	int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_INTERRUPT	0x10u
+#define SA_NOMASK	0x20u
+#define SA_SHIRQ	0x40u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ *
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_STATIC_ALLOC		0x80
+#endif
+
+/* Type of a signal handler.  */
+#ifdef __KERNEL__
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+#else
+typedef void (*__sighandler_t)(int);
+typedef void (*__sigrestore_t)(void);
+#endif
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+struct __new_sigaction {
+	__sighandler_t		sa_handler;
+	unsigned long		sa_flags;
+	__sigrestore_t 		sa_restorer;  /* not used by Linux/SPARC yet */
+	__new_sigset_t		sa_mask;
+};
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+	unsigned		sa_handler;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	compat_sigset_t 	sa_mask;
+};
+#endif
+
+struct k_sigaction {
+	struct __new_sigaction 	sa;
+	void __user		*ka_restorer;
+};
+#endif
+
+struct __old_sigaction {
+	__sighandler_t  	sa_handler;
+	__old_sigset_t  	sa_mask;
+	unsigned long   	sa_flags;
+	void 			(*sa_restorer)(void);     /* not used by Linux/SPARC yet */
+};
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_COMPAT
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+#endif
+
+#endif
+
+typedef struct sigaltstack {
+	void			__user *ss_sp;
+	int			ss_flags;
+	size_t			ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_COMPAT
+typedef struct sigaltstack32 {
+	u32			ss_sp;
+	int			ss_flags;
+	compat_size_t		ss_size;
+} stack_t32;
+#endif
+
+struct signal_deliver_cookie {
+	int restart_syscall;
+	unsigned long orig_i0;
+};
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
new file mode 100644
index 000000000000..5e3e06d908fe
--- /dev/null
+++ b/include/asm-sparc64/smp.h
@@ -0,0 +1,75 @@
+/* smp.h: Sparc64 specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_SMP_H
+#define _SPARC64_SMP_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/asi.h>
+#include <asm/starfire.h>
+#include <asm/spitfire.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+/*
+ *	Private routines/data
+ */
+ 
+#include <asm/bitops.h>
+#include <asm/atomic.h>
+
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+static __inline__ int hard_smp_processor_id(void)
+{
+	if (tlb_type == cheetah || tlb_type == cheetah_plus) {
+		unsigned long cfg, ver;
+		__asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
+		if ((ver >> 32) == 0x003e0016) {
+			__asm__ __volatile__("ldxa [%%g0] %1, %0"
+					     : "=r" (cfg)
+					     : "i" (ASI_JBUS_CONFIG));
+			return ((cfg >> 17) & 0x1f);
+		} else {
+			__asm__ __volatile__("ldxa [%%g0] %1, %0"
+					     : "=r" (cfg)
+					     : "i" (ASI_SAFARI_CONFIG));
+			return ((cfg >> 17) & 0x3ff);
+		}
+	} else if (this_is_starfire != 0) {
+		return starfire_hard_smp_processor_id();
+	} else {
+		unsigned long upaconfig;
+		__asm__ __volatile__("ldxa	[%%g0] %1, %0"
+				     : "=r" (upaconfig)
+				     : "i" (ASI_UPA_CONFIG));
+		return ((upaconfig >> 17) & 0x1f);
+	}
+}
+
+#define smp_processor_id() (current_thread_info()->cpu)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(CONFIG_SMP) */
+
+#define NO_PROC_ID		0xFF
+
+#endif /* !(_SPARC64_SMP_H) */
diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h
new file mode 100644
index 000000000000..865547a23908
--- /dev/null
+++ b/include/asm-sparc64/socket.h
@@ -0,0 +1,55 @@
+/* $Id: socket.h,v 1.10 2001/06/13 16:25:03 davem Exp $ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_PASSCRED	0x0002
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_PEERCRED	0x0040
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN	0x8000
+
+/* wha!??? */
+#define SO_DONTLINGER   (~SO_LINGER)  /* Older SunOS compat. hack */
+
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK	0x000b
+#define SO_PRIORITY	0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER	0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME		0x001c
+#define SO_TIMESTAMP		0x001d
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		0x001e
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-sparc64/sockios.h b/include/asm-sparc64/sockios.h
new file mode 100644
index 000000000000..6735bab4f39d
--- /dev/null
+++ b/include/asm-sparc64/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SPARC64_SOCKIOS_H
+#define _ASM_SPARC64_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* !(_ASM_SPARC64_SOCKIOS_H) */
+
diff --git a/include/asm-sparc64/solerrno.h b/include/asm-sparc64/solerrno.h
new file mode 100644
index 000000000000..a2ea6fcf3446
--- /dev/null
+++ b/include/asm-sparc64/solerrno.h
@@ -0,0 +1,132 @@
+/* $Id: solerrno.h,v 1.1 1996/12/26 14:22:40 davem Exp $
+ * solerrno.h: Solaris error return codes for compatibility.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_SOLERRNO_H
+#define _SPARC64_SOLERRNO_H
+
+#define SOL_EPERM          1     /* Required superuser access perms  */
+#define SOL_ENOENT         2     /* File or directory does not exist */
+#define SOL_ESRCH          3     /* Process did not exist            */
+#define	SOL_EINTR          4     /* System call was interrupted      */
+#define	SOL_EIO            5     /* An i/o error occurred            */
+#define	SOL_ENXIO          6     /* Device or Address does not exist */
+#define	SOL_E2BIG          7	 /* Too many arguments were given    */
+#define	SOL_ENOEXEC        8     /* Header of executable was munged  */
+#define	SOL_EBADF          9     /* Bogus file number                */
+#define	SOL_ECHILD         10    /* No children of process exist     */
+#define	SOL_EAGAIN         11    /* beep beep, "try again later"     */
+#define	SOL_ENOMEM         12    /* No memory available              */
+#define	SOL_EACCES         13    /* Access not allowed               */
+#define	SOL_EFAULT         14    /* Address passed was invalid       */
+#define	SOL_ENOTBLK        15    /* blkdev op on non-block device    */
+#define	SOL_EBUSY          16    /* Mounted device was busy          */
+#define	SOL_EEXIST         17    /* File specified already exists    */
+#define	SOL_EXDEV          18    /* Link request across diff devices */
+#define	SOL_ENODEV         19    /* Device does not exist on system  */
+#define	SOL_ENOTDIR        20    /* Dir operation on non-directory   */
+#define	SOL_EISDIR         21    /* File was of directory type       */
+#define	SOL_EINVAL         22    /* Argument passed was invalid      */
+#define	SOL_ENFILE         23    /* No more room in file table       */
+#define	SOL_EMFILE         24    /* Proc has too many files open     */
+#define	SOL_ENOTTY         25    /* Ioctl was invalid for req device */
+#define	SOL_ETXTBSY        26    /* Text file in busy state          */
+#define	SOL_EFBIG          27    /* Too big of a file for operation  */
+#define	SOL_ENOSPC         28    /* Disk is full                     */
+#define	SOL_ESPIPE         29    /* Seek attempted on non-seeking dev*/
+#define	SOL_EROFS          30    /* Write attempted on read-only fs  */
+#define	SOL_EMLINK         31    /* Too many links in file search    */
+#define	SOL_EPIPE          32    /* Call a plumber                   */
+#define	SOL_EDOM           33    /* Argument was out of fct domain   */
+#define	SOL_ERANGE         34    /* Could not represent math result  */
+#define	SOL_ENOMSG         35    /* Message of req type doesn't exist */
+#define	SOL_EIDRM          36    /* Identifier has been removed      */
+#define	SOL_ECHRNG         37    /* Req channel number out of range  */
+#define	SOL_EL2NSYNC       38    /* Could not sync at run level 2    */
+#define	SOL_EL3HLT         39    /* Halted at run level 3            */
+#define	SOL_EL3RST         40    /* Reset at run level 3             */
+#define	SOL_ELNRNG         41    /* Out of range link number         */
+#define	SOL_EUNATCH        42    /* Driver for protocol not attached */
+#define	SOL_ENOCSI         43    /* CSI structure not around         */
+#define	SOL_EL2HLT         44    /* Halted at run level 2            */
+#define	SOL_EDEADLK        45    /* Deadlock condition detected      */
+#define	SOL_ENOLCK         46    /* Record locks unavailable         */
+#define	SOL_ECANCELED      47    /* Cancellation of oper. happened   */
+#define	SOL_ENOTSUP        48    /* Attempt of unsupported operation */
+#define	SOL_EDQUOT         49    /* Users disk quota exceeded        */
+#define	SOL_EBADE          50    /* Invalid exchange                 */
+#define	SOL_EBADR          51    /* Request descriptor was invalid   */
+#define	SOL_EXFULL         52    /* Full exchange                    */
+#define	SOL_ENOANO         53    /* ano does not exist               */
+#define	SOL_EBADRQC        54    /* Req code was invalid             */
+#define	SOL_EBADSLT        55    /* Bad slot number                  */
+#define	SOL_EDEADLOCK      56    /* Deadlock in fs error             */
+#define	SOL_EBFONT         57    /* Font file format invalid         */
+/* YOW, I LOVE SYSV STREAMS!!!! */
+#define	SOL_ENOSTR         60    /* Stream-op on non-stream dev      */
+#define	SOL_ENODATA        61    /* No data avail at this time       */
+#define	SOL_ETIME          62    /* Expiration of time occurred      */
+#define	SOL_ENOSR          63    /* Streams resources exhausted      */
+#define	SOL_ENONET         64    /* No network connected             */
+#define	SOL_ENOPKG         65    /* Non-installed package            */
+#define	SOL_EREMOTE        66    /* Object was on remote machine     */
+#define	SOL_ENOLINK        67    /* Cut link                         */
+#define	SOL_EADV           68    /* Error in advertise               */
+#define	SOL_ESRMNT         69    /* Some magic srmount problem       */
+#define	SOL_ECOMM          70    /* During send, comm error occurred */
+#define	SOL_EPROTO         71    /* Protocol botch                   */
+#define	SOL_EMULTIHOP      74    /* Multihop attempted               */
+#define	SOL_EBADMSG        77    /* Message was unreadable           */
+#define	SOL_ENAMETOOLONG   78    /* Too long of a path name          */
+#define	SOL_EOVERFLOW      79    /* Data type too small for datum    */
+#define	SOL_ENOTUNIQ       80    /* Logical name was not unique      */
+#define	SOL_EBADFD         81    /* Op cannot be performed on fd     */
+#define	SOL_EREMCHG        82    /* Remote address is now different  */
+#define	SOL_ELIBACC        83    /* Shared lib could not be accessed */
+#define	SOL_ELIBBAD        84    /* ShLib is corrupted in some way   */
+#define	SOL_ELIBSCN        85    /* A.out ShLib problems             */
+#define	SOL_ELIBMAX        86    /* Exceeded ShLib linkage limit     */
+#define	SOL_ELIBEXEC       87    /* Execution of ShLib attempted     */
+#define	SOL_EILSEQ         88    /* Bad byte sequence found          */
+#define	SOL_ENOSYS         89    /* Invalid filesystem operation     */
+#define	SOL_ELOOP          90    /* Detected loop in symbolic links  */
+#define	SOL_ERESTART       91    /* System call is restartable       */
+#define	SOL_ESTRPIPE       92    /* Do not sleep in head of stream   */
+#define	SOL_ENOTEMPTY      93    /* Rmdir of non-empty directory     */
+#define	SOL_EUSERS         94    /* Over abundance of users for ufs  */
+#define	SOL_ENOTSOCK       95    /* Sock-op on non-sock              */
+#define	SOL_EDESTADDRREQ   96    /* No dest addr given, but needed   */
+#define	SOL_EMSGSIZE       97    /* Msg too big                      */
+#define	SOL_EPROTOTYPE     98    /* Bad socket protocol              */
+#define	SOL_ENOPROTOOPT    99    /* Unavailable protocol             */
+#define	SOL_EPROTONOSUPPORT 120  /* Unsupported protocol             */
+#define	SOL_ESOCKTNOSUPPORT 121  /* Unsupported socket type          */
+#define	SOL_EOPNOTSUPP     122   /* Unsupported sock-op              */
+#define	SOL_EPFNOSUPPORT   123   /* Unsupported protocol family      */
+#define	SOL_EAFNOSUPPORT   124   /* Unsup addr family for protocol   */
+#define	SOL_EADDRINUSE     125   /* Req addr is already in use       */
+#define	SOL_EADDRNOTAVAIL  126   /* Req addr not available right now */
+#define	SOL_ENETDOWN       127   /* Your subnet is on fire           */
+#define	SOL_ENETUNREACH    128   /* Someone playing with gateway and */
+                                 /* did not tell you he was going to */
+#define	SOL_ENETRESET      129   /* Buy less-buggy ethernet cards    */
+#define	SOL_ECONNABORTED   130   /* Aborted connection due to sw     */
+#define	SOL_ECONNRESET     131   /* Your peers reset your connection */
+#define	SOL_ENOBUFS        132   /* No buffer space available        */
+#define	SOL_EISCONN        133   /* Connect on already connected     */
+                                 /* socket attempted                 */
+#define	SOL_ENOTCONN       134   /* Comm on non-connected socket     */
+#define	SOL_ESHUTDOWN      143   /* Op attempted after sock-shutdown */
+#define	SOL_ETOOMANYREFS   144   /* Reference limit exceeded         */
+#define	SOL_ETIMEDOUT      145   /* Timed out connection             */
+#define	SOL_ECONNREFUSED   146   /* Connection refused by remote host*/
+#define	SOL_EHOSTDOWN      147   /* Remote host is up in flames      */
+#define	SOL_EHOSTUNREACH   148   /* Make a left at Easton Ave.....   */
+#define	SOL_EWOULDBLOCK    EAGAIN /* Just an alias */
+#define	SOL_EALREADY       149   /* Operation is already occurring   */
+#define	SOL_EINPROGRESS    150   /* Operation is happening now       */
+#define	SOL_ESTALE         151   /* Fungus growth on NFS file handle */
+
+#endif /* !(_SPARC64_SOLERRNO_H) */
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
new file mode 100644
index 000000000000..11efa474865b
--- /dev/null
+++ b/include/asm-sparc64/spinlock.h
@@ -0,0 +1,310 @@
+/* spinlock.h: 64-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_SPINLOCK_H
+#define __SPARC64_SPINLOCK_H
+
+#include <linux/config.h>
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+/* To get debugging spinlocks which detect and catch
+ * deadlock situations, set CONFIG_DEBUG_SPINLOCK
+ * and rebuild your kernel.
+ */
+
+/* All of these locking primitives are expected to work properly
+ * even in an RMO memory model, which currently is what the kernel
+ * runs in.
+ *
+ * There is another issue.  Because we play games to save cycles
+ * in the non-contention case, we need to be extra careful about
+ * branch targets into the "spinning" code.  They live in their
+ * own section, but the newer V9 branches have a shorter range
+ * than the traditional 32-bit sparc branch variants.  The rule
+ * is that the branches that go into and out of the spinner sections
+ * must be pre-V9 branches.
+ */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+typedef unsigned char spinlock_t;
+#define SPIN_LOCK_UNLOCKED	0
+
+#define spin_lock_init(lock)	(*((unsigned char *)(lock)) = 0)
+#define spin_is_locked(lock)	(*((volatile unsigned char *)(lock)) != 0)
+
+#define spin_unlock_wait(lock)	\
+do {	membar("#LoadLoad");	\
+} while(*((volatile unsigned char *)lock))
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%1], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	 membar		#StoreLoad | #StoreStore\n"
+"	.subsection	2\n"
+"2:	ldub		[%1], %0\n"
+"	brnz,pt		%0, 2b\n"
+"	 membar		#LoadLoad\n"
+"	ba,a,pt		%%xcc, 1b\n"
+"	.previous"
+	: "=&r" (tmp)
+	: "r" (lock)
+	: "memory");
+}
+
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	unsigned long result;
+
+	__asm__ __volatile__(
+"	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore"
+	: "=r" (result)
+	: "r" (lock)
+	: "memory");
+
+	return (result == 0UL);
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#StoreStore | #LoadStore\n"
+"	stb		%%g0, [%0]"
+	: /* No outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static inline void _raw_spin_lock_flags(spinlock_t *lock, unsigned long flags)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%2], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	.subsection	2\n"
+"2:	rdpr		%%pil, %1\n"
+"	wrpr		%3, %%pil\n"
+"3:	ldub		[%2], %0\n"
+"	brnz,pt		%0, 3b\n"
+"	membar		#LoadLoad\n"
+"	ba,pt		%%xcc, 1b\n"
+"	wrpr		%1, %%pil\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r"(lock), "r"(flags)
+	: "memory");
+}
+
+#else /* !(CONFIG_DEBUG_SPINLOCK) */
+
+typedef struct {
+	unsigned char lock;
+	unsigned int owner_pc, owner_cpu;
+} spinlock_t;
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0, 0, 0xff }
+#define spin_lock_init(__lock)	\
+do {	(__lock)->lock = 0; \
+	(__lock)->owner_pc = 0; \
+	(__lock)->owner_cpu = 0xff; \
+} while(0)
+#define spin_is_locked(__lock)	(*((volatile unsigned char *)(&((__lock)->lock))) != 0)
+#define spin_unlock_wait(__lock)	\
+do { \
+	membar("#LoadLoad"); \
+} while(*((volatile unsigned char *)(&((__lock)->lock))))
+
+extern void _do_spin_lock (spinlock_t *lock, char *str);
+extern void _do_spin_unlock (spinlock_t *lock);
+extern int _do_spin_trylock (spinlock_t *lock);
+
+#define _raw_spin_trylock(lp)	_do_spin_trylock(lp)
+#define _raw_spin_lock(lock)	_do_spin_lock(lock, "spin_lock")
+#define _raw_spin_unlock(lock)	_do_spin_unlock(lock)
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+typedef unsigned int rwlock_t;
+#define RW_LOCK_UNLOCKED	0
+#define rwlock_init(lp) do { *(lp) = RW_LOCK_UNLOCKED; } while(0)
+
+static void inline __read_lock(rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,pn		%0, 2f\n"
+"4:	 add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	bne,pn		%%icc, 1b\n"
+"	 membar		#StoreLoad | #StoreStore\n"
+"	.subsection	2\n"
+"2:	ldsw		[%2], %0\n"
+"	brlz,pt		%0, 2b\n"
+"	 membar		#LoadLoad\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static void inline __read_unlock(rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
+"1:	lduw	[%2], %0\n"
+"	sub	%0, 1, %1\n"
+"	cas	[%2], %0, %1\n"
+"	cmp	%0, %1\n"
+"	bne,pn	%%xcc, 1b\n"
+"	 nop"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static void inline __write_lock(rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"1:	lduw		[%2], %0\n"
+"	brnz,pn		%0, 2f\n"
+"4:	 or		%0, %3, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	bne,pn		%%icc, 1b\n"
+"	 membar		#StoreLoad | #StoreStore\n"
+"	.subsection	2\n"
+"2:	lduw		[%2], %0\n"
+"	brnz,pt		%0, 2b\n"
+"	 membar		#LoadLoad\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock), "r" (mask)
+	: "memory");
+}
+
+static void inline __write_unlock(rwlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#LoadStore | #StoreStore\n"
+"	stw		%%g0, [%0]"
+	: /* no outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __write_trylock(rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2, result;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"	mov		0, %2\n"
+"1:	lduw		[%3], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	 or		%0, %4, %1\n"
+"	cas		[%3], %0, %1\n"
+"	cmp		%0, %1\n"
+"	bne,pn		%%icc, 1b\n"
+"	 membar		#StoreLoad | #StoreStore\n"
+"	mov		1, %2\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
+	: "r" (lock), "r" (mask)
+	: "memory");
+
+	return result;
+}
+
+#define _raw_read_lock(p)	__read_lock(p)
+#define _raw_read_unlock(p)	__read_unlock(p)
+#define _raw_write_lock(p)	__write_lock(p)
+#define _raw_write_unlock(p)	__write_unlock(p)
+#define _raw_write_trylock(p)	__write_trylock(p)
+
+#else /* !(CONFIG_DEBUG_SPINLOCK) */
+
+typedef struct {
+	unsigned long lock;
+	unsigned int writer_pc, writer_cpu;
+	unsigned int reader_pc[NR_CPUS];
+} rwlock_t;
+#define RW_LOCK_UNLOCKED	(rwlock_t) { 0, 0, 0xff, { } }
+#define rwlock_init(lp) do { *(lp) = RW_LOCK_UNLOCKED; } while(0)
+
+extern void _do_read_lock(rwlock_t *rw, char *str);
+extern void _do_read_unlock(rwlock_t *rw, char *str);
+extern void _do_write_lock(rwlock_t *rw, char *str);
+extern void _do_write_unlock(rwlock_t *rw);
+extern int _do_write_trylock(rwlock_t *rw, char *str);
+
+#define _raw_read_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_read_lock(lock, "read_lock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_read_unlock(lock, "read_unlock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_write_lock(lock, "write_lock"); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	_do_write_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+#define _raw_write_trylock(lock) \
+({	unsigned long flags; \
+	int val; \
+	local_irq_save(flags); \
+	val = _do_write_trylock(lock, "write_trylock"); \
+	local_irq_restore(flags); \
+	val; \
+})
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
new file mode 100644
index 000000000000..ad78ce64d69e
--- /dev/null
+++ b/include/asm-sparc64/spitfire.h
@@ -0,0 +1,461 @@
+/* $Id: spitfire.h,v 1.18 2001/11/29 16:42:10 kanoj Exp $
+ * spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_SPITFIRE_H
+#define _SPARC64_SPITFIRE_H
+
+#include <asm/asi.h>
+
+/* The following register addresses are accessible via ASI_DMMU
+ * and ASI_IMMU, that is there is a distinct and unique copy of
+ * each these registers for each TLB.
+ */
+#define TSB_TAG_TARGET		0x0000000000000000 /* All chips				*/
+#define TLB_SFSR		0x0000000000000018 /* All chips				*/
+#define TSB_REG			0x0000000000000028 /* All chips				*/
+#define TLB_TAG_ACCESS		0x0000000000000030 /* All chips				*/
+#define VIRT_WATCHPOINT		0x0000000000000038 /* All chips				*/
+#define PHYS_WATCHPOINT		0x0000000000000040 /* All chips				*/
+#define TSB_EXTENSION_P		0x0000000000000048 /* Ultra-III and later		*/
+#define TSB_EXTENSION_S		0x0000000000000050 /* Ultra-III and later, D-TLB only	*/
+#define TSB_EXTENSION_N		0x0000000000000058 /* Ultra-III and later		*/
+#define TLB_TAG_ACCESS_EXT	0x0000000000000060 /* Ultra-III+ and later		*/
+
+/* These registers only exist as one entity, and are accessed
+ * via ASI_DMMU only.
+ */
+#define PRIMARY_CONTEXT		0x0000000000000008
+#define SECONDARY_CONTEXT	0x0000000000000010
+#define DMMU_SFAR		0x0000000000000020
+#define VIRT_WATCHPOINT		0x0000000000000038
+#define PHYS_WATCHPOINT		0x0000000000000040
+
+#define SPITFIRE_HIGHEST_LOCKED_TLBENT	(64 - 1)
+#define CHEETAH_HIGHEST_LOCKED_TLBENT	(16 - 1)
+
+#define L1DCACHE_SIZE		0x4000
+
+#ifndef __ASSEMBLY__
+
+enum ultra_tlb_layout {
+	spitfire = 0,
+	cheetah = 1,
+	cheetah_plus = 2,
+};
+
+extern enum ultra_tlb_layout tlb_type;
+
+#define sparc64_highest_locked_tlbent()	\
+	(tlb_type == spitfire ? \
+	 SPITFIRE_HIGHEST_LOCKED_TLBENT : \
+	 CHEETAH_HIGHEST_LOCKED_TLBENT)
+
+static __inline__ unsigned long spitfire_get_isfsr(void)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (TLB_SFSR), "i" (ASI_IMMU));
+	return ret;
+}
+
+static __inline__ unsigned long spitfire_get_dsfsr(void)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (TLB_SFSR), "i" (ASI_DMMU));
+	return ret;
+}
+
+static __inline__ unsigned long spitfire_get_sfar(void)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (DMMU_SFAR), "i" (ASI_DMMU));
+	return ret;
+}
+
+static __inline__ void spitfire_put_isfsr(unsigned long sfsr)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* no outputs */
+			     : "r" (sfsr), "r" (TLB_SFSR), "i" (ASI_IMMU));
+}
+
+static __inline__ void spitfire_put_dsfsr(unsigned long sfsr)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* no outputs */
+			     : "r" (sfsr), "r" (TLB_SFSR), "i" (ASI_DMMU));
+}
+
+/* The data cache is write through, so this just invalidates the
+ * specified line.
+ */
+static __inline__ void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
+	__asm__ __volatile__ ("membar #Sync" : : : "memory");
+}
+
+/* The instruction cache lines are flushed with this, but note that
+ * this does not flush the pipeline.  It is possible for a line to
+ * get flushed but stale instructions to still be in the pipeline,
+ * a flush instruction (to any address) is sufficient to handle
+ * this issue after the line is invalidated.
+ */
+static __inline__ void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
+}
+
+static __inline__ unsigned long spitfire_get_dtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static __inline__ unsigned long spitfire_get_dtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static __inline__ void spitfire_put_dtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static __inline__ unsigned long spitfire_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static __inline__ unsigned long spitfire_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static __inline__ void spitfire_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+/* Spitfire hardware assisted TLB flushes. */
+
+/* Context level flushes. */
+static __inline__ void spitfire_flush_dtlb_primary_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x40), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_primary_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x40), "i" (ASI_IMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_dtlb_secondary_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x50), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_secondary_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x50), "i" (ASI_IMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_dtlb_nucleus_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x60), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_nucleus_context(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x60), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Page level flushes. */
+static __inline__ void spitfire_flush_dtlb_primary_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_primary_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page), "i" (ASI_IMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_dtlb_secondary_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x10), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_secondary_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x10), "i" (ASI_IMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void spitfire_flush_itlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has "all non-locked" tlb flushes. */
+static __inline__ void cheetah_flush_dtlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_DMMU_DEMAP));
+}
+
+static __inline__ void cheetah_flush_itlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has a 4-tlb layout so direct access is a bit different.
+ * The first two TLBs are fully assosciative, hold 16 entries, and are
+ * used only for locked and >8K sized translations.  One exists for
+ * data accesses and one for instruction accesses.
+ *
+ * The third TLB is for data accesses to 8K non-locked translations, is
+ * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
+ * instruction accesses to 8K non-locked translations, is 2 way
+ * assosciative, and holds 128 entries.
+ *
+ * Cheetah has some bug where bogus data can be returned from
+ * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
+ * the problem for me. -DaveM
+ */
+static __inline__ unsigned long cheetah_get_ldtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static __inline__ unsigned long cheetah_get_litlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static __inline__ unsigned long cheetah_get_ldtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_TAG_READ));
+
+	return tag;
+}
+
+static __inline__ unsigned long cheetah_get_litlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_TAG_READ));
+
+	return tag;
+}
+
+static __inline__ void cheetah_put_ldtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static __inline__ void cheetah_put_litlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static __inline__ unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static __inline__ unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static __inline__ void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((tlb << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static __inline__ unsigned long cheetah_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static __inline__ unsigned long cheetah_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static __inline__ void cheetah_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" ((2 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
new file mode 100644
index 000000000000..b606cb2b32a8
--- /dev/null
+++ b/include/asm-sparc64/starfire.h
@@ -0,0 +1,21 @@
+/* $Id: starfire.h,v 1.2 2001/07/04 00:18:18 davem Exp $
+ * starfire.h: Group all starfire specific code together.
+ *
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC64_STARFIRE_H
+#define _SPARC64_STARFIRE_H
+
+#ifndef __ASSEMBLY__
+
+extern int this_is_starfire;
+
+extern void check_if_starfire(void);
+extern void starfire_cpu_setup(void);
+extern int starfire_hard_smp_processor_id(void);
+extern void *starfire_hookup(int);
+extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
+
+#endif
+#endif
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
new file mode 100644
index 000000000000..48e06618a5a4
--- /dev/null
+++ b/include/asm-sparc64/stat.h
@@ -0,0 +1,63 @@
+/* $Id: stat.h,v 1.7 2000/08/04 05:35:55 davem Exp $ */
+#ifndef _SPARC64_STAT_H
+#define _SPARC64_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned   st_dev;
+	ino_t   st_ino;
+	mode_t  st_mode;
+	short   st_nlink;
+	uid_t   st_uid;
+	gid_t   st_gid;
+	unsigned   st_rdev;
+	off_t   st_size;
+	time_t  st_atime;
+	time_t  st_mtime;
+	time_t  st_ctime;
+	off_t   st_blksize;
+	off_t   st_blocks;
+	unsigned long  __unused4[2];
+};
+
+#ifdef __KERNEL__
+/* This is sparc32 stat64 structure. */
+
+struct stat64 {
+	unsigned long long	st_dev;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif
+
+#endif
diff --git a/include/asm-sparc64/statfs.h b/include/asm-sparc64/statfs.h
new file mode 100644
index 000000000000..185b6c481b24
--- /dev/null
+++ b/include/asm-sparc64/statfs.h
@@ -0,0 +1,55 @@
+/* $Id: statfs.h,v 1.2 1997/04/14 17:05:22 jj Exp $ */
+#ifndef _SPARC64_STATFS_H
+#define _SPARC64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/include/asm-sparc64/string.h b/include/asm-sparc64/string.h
new file mode 100644
index 000000000000..c7d88622cb27
--- /dev/null
+++ b/include/asm-sparc64/string.h
@@ -0,0 +1,83 @@
+/* $Id: string.h,v 1.20 2001/09/27 04:36:24 kanoj Exp $
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
+ */
+
+#ifndef __SPARC64_STRING_H__
+#define __SPARC64_STRING_H__
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+#include <asm/asi.h>
+
+extern void *__memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *__builtin_memset(void *,int,__kernel_size_t);
+
+static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if (!c) {
+		__bzero(s, count);
+		return s;
+	} else
+		return __memset(s, c, count);
+}
+
+#undef memset
+#define memset(s, c, count) \
+((__builtin_constant_p(count) && (count) <= 32) ? \
+ __builtin_memset((s), (c), (count)) : \
+ (__builtin_constant_p(c) ? \
+  __constant_memset((s), (c), (count)) : \
+  __memset((s), (c), (count))))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)					\
+({									\
+	extern void *__memscan_zero(void *, size_t);			\
+	extern void *__memscan_generic(void *, int, size_t);		\
+	void *__retval, *__addr = (__arg0);				\
+	size_t __size = (__arg2);					\
+									\
+	if(__builtin_constant_p(__char) && !(__char))			\
+		__retval = __memscan_zero(__addr, __size);		\
+	else								\
+		__retval = __memscan_generic(__addr, (__char), __size);	\
+									\
+	__retval;							\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC64_STRING_H__) */
diff --git a/include/asm-sparc64/sunbpp.h b/include/asm-sparc64/sunbpp.h
new file mode 100644
index 000000000000..b441cc9c426c
--- /dev/null
+++ b/include/asm-sparc64/sunbpp.h
@@ -0,0 +1,80 @@
+/* $Id: sunbpp.h,v 1.1 1999/08/13 06:21:44 shadow Exp $
+ * include/asm-sparc64/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC64_SUNBPP_H
+#define _ASM_SPARC64_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC64_SUNBPP_H) */
diff --git a/include/asm-sparc64/svr4.h b/include/asm-sparc64/svr4.h
new file mode 100644
index 000000000000..c96d5f116e1c
--- /dev/null
+++ b/include/asm-sparc64/svr4.h
@@ -0,0 +1,120 @@
+/* Solaris/SPARC constants and definitions -- 
+ * (C) 1996 Miguel de Icaza
+ *
+ * This file is not meant to be included by user level applications
+ * but the solaris syscall emulator
+ */
+
+#ifndef _SPARC64_SVR4_H
+#define _SPARC64_SVR4_H
+
+/* Signals as used by svr4 */
+typedef struct {                /* signal set type */
+	uint sigbits[4];
+} svr4_sigset_t;
+
+/* Values for siginfo.code */
+#define SVR4_SINOINFO 32767
+/* Siginfo, sucker expects bunch of information on those parameters */
+typedef union {
+	char total_size [128];
+	struct {
+		int signo;
+		int code;
+		int error;
+		union {
+		} data; 
+	} siginfo;
+} svr4_siginfo_t;
+
+/* Context definition */
+
+/* Location of the user stored registers into a greg_t */
+enum {
+	SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y,
+	SVR4_G1,  SVR4_G2, SVR4_G3,  SVR4_G4,
+	SVR4_G5,  SVR4_G6, SVR4_G7,  SVR4_O0,
+	SVR4_O1,  SVR4_O2, SVR4_O3,  SVR4_O4,
+	SVR4_O5,  SVR4_O6, SVR4_O7
+};
+
+/* sizeof (regs) / sizeof (greg_t), defined in the ABI */
+#define SVR4_NREGS  19
+#define SVR4_MAXWIN 31
+
+typedef struct {
+	u32 rwin_lo[8];
+	u32 rwin_in[8];
+} svr4_rwindow_t;
+
+typedef struct {
+	int            count;
+	u32            winptr [SVR4_MAXWIN]; /* pointer to the windows */
+
+	svr4_rwindow_t win[SVR4_MAXWIN];      /* the windows */
+} svr4_gwindows_t;
+
+typedef int svr4_gregset_t[SVR4_NREGS];
+
+typedef struct {
+	u64   	 fpu_regs[32];
+	u32	 fp_q;
+	u32      fp_fsr;
+	u_char   fp_nqel;
+	u_char   fp_nqsize;
+	u_char   inuse;		/* if fpu is in use */
+} svr4_fregset_t;
+
+typedef struct {
+	u32    id;		/* if this holds "xrs" string => ptr is valid */
+	u32    ptr;
+} svr4_xrs_t;
+
+/* Machine dependent context */
+typedef struct {
+	svr4_gregset_t   greg;	/* registers 0..19 (see top) */
+	u32		 gwin;	/* may point to register windows */
+	svr4_fregset_t   freg;	/* floating point registers */
+	svr4_xrs_t       xrs;	/* mhm? */
+	int              pad[19];
+} svr4_mcontext_t;
+
+/* flags for stack_t.flags */
+enum svr4_stack_flags {
+	SVR4_SS_ONSTACK,
+	SVR4_SS_DISABLE,
+};
+
+/* signal stack execution place, unsupported */
+typedef struct svr4_stack_t {
+        u32  sp;
+        int  size;
+        int  flags;
+} svr4_stack_t;
+
+/* Context used by getcontext and setcontext */
+typedef struct svr4_ucontext_t {
+	u32		flags; /* context flags, indicate what is loaded */
+	u32		link;
+	svr4_sigset_t	sigmask;
+	svr4_stack_t	stack;
+	svr4_mcontext_t	mcontext;
+	int		pad[23];
+} svr4_ucontext_t;                          
+
+/* windows hold the windows as they were at signal time,
+ * ucontext->mcontext holds a pointer to them.
+ * addresses for uc and si are passed as parameters to svr4 signal
+ * handler
+ */
+
+/* This is the signal frame that is passed to the signal handler */
+typedef struct {
+	svr4_gwindows_t gw;	/* windows */
+	svr4_ucontext_t uc;	/* machine context */
+	svr4_siginfo_t  si;	/* siginfo */
+} svr4_signal_frame_t;
+
+#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7)))
+
+#endif /* include control */
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
new file mode 100644
index 000000000000..fd12ca386f48
--- /dev/null
+++ b/include/asm-sparc64/system.h
@@ -0,0 +1,350 @@
+/* $Id: system.h,v 1.69 2002/02/09 19:49:31 davem Exp $ */
+#ifndef __SPARC64_SYSTEM_H
+#define __SPARC64_SYSTEM_H
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/visasm.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+                  
+#define sparc_cpu_model sun4u
+
+/* This cannot ever be a sun4c nor sun4 :) That's just history. */
+#define ARCH_SUN4C_SUN4 0
+#define ARCH_SUN4 0
+
+#endif
+
+#define setipl(__new_ipl) \
+	__asm__ __volatile__("wrpr	%0, %%pil"  : : "r" (__new_ipl) : "memory")
+
+#define local_irq_disable() \
+	__asm__ __volatile__("wrpr	15, %%pil" : : : "memory")
+
+#define local_irq_enable() \
+	__asm__ __volatile__("wrpr	0, %%pil" : : : "memory")
+
+#define getipl() \
+({ unsigned long retval; __asm__ __volatile__("rdpr	%%pil, %0" : "=r" (retval)); retval; })
+
+#define swap_pil(__new_pil) \
+({	unsigned long retval; \
+	__asm__ __volatile__("rdpr	%%pil, %0\n\t" \
+			     "wrpr	%1, %%pil" \
+			     : "=&r" (retval) \
+			     : "r" (__new_pil) \
+			     : "memory"); \
+	retval; \
+})
+
+#define read_pil_and_cli() \
+({	unsigned long retval; \
+	__asm__ __volatile__("rdpr	%%pil, %0\n\t" \
+			     "wrpr	15, %%pil" \
+			     : "=r" (retval) \
+			     : : "memory"); \
+	retval; \
+})
+
+#define local_save_flags(flags)		((flags) = getipl())
+#define local_irq_save(flags)		((flags) = read_pil_and_cli())
+#define local_irq_restore(flags)		setipl((flags))
+
+/* On sparc64 IRQ flags are the PIL register.  A value of zero
+ * means all interrupt levels are enabled, any other value means
+ * only IRQ levels greater than that value will be received.
+ * Consequently this means that the lowest IRQ level is one.
+ */
+#define irqs_disabled()		\
+({	unsigned long flags;	\
+	local_save_flags(flags);\
+	(flags > 0);		\
+})
+
+#define nop() 		__asm__ __volatile__ ("nop")
+
+#define membar(type)	__asm__ __volatile__ ("membar " type : : : "memory")
+#define mb()		\
+	membar("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
+#define rmb()		membar("#LoadLoad")
+#define wmb()		membar("#StoreStore")
+#define read_barrier_depends()		do { } while(0)
+#define set_mb(__var, __value) \
+	do { __var = __value; membar("#StoreLoad | #StoreStore"); } while(0)
+#define set_wmb(__var, __value) \
+	do { __var = __value; membar("#StoreStore"); } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
+
+#define flushw_all()	__asm__ __volatile__("flushw")
+
+/* Performance counter register access. */
+#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
+#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
+#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
+
+/* Blackbird errata workaround.  See commentary in
+ * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+ * for more information.
+ */
+#define reset_pic()    						\
+	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
+			     ".align	64\n"			\
+			  "99:wr	%g0, 0x0, %pic\n\t"	\
+			     "rd	%pic, %g0")
+
+#ifndef __ASSEMBLY__
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static __inline__ int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+extern void synchronize_user_stack(void);
+
+extern void __flushw_user(void);
+#define flushw_user() __flushw_user()
+
+#define flush_user_windows flushw_user
+#define flush_register_windows flushw_all
+
+#define prepare_arch_switch(rq, next)		\
+do {	spin_lock(&(next)->switch_lock);	\
+	spin_unlock(&(rq)->lock);		\
+	flushw_all();				\
+} while (0)
+
+#define finish_arch_switch(rq, prev)		\
+do {	spin_unlock_irq(&(prev)->switch_lock);	\
+} while (0)
+
+#define task_running(rq, p) \
+	((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+	/* See what happens when you design the chip correctly?
+	 *
+	 * We tell gcc we clobber all non-fixed-usage registers except
+	 * for l0/l1.  It will use one for 'next' and the other to hold
+	 * the output value of 'last'.  'next' is not referenced again
+	 * past the invocation of switch_to in the scheduler, so we need
+	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
+	 * and 2 stores in this critical code path.  -DaveM
+	 */
+#if __GNUC__ >= 3
+#define EXTRA_CLOBBER ,"%l1"
+#else
+#define EXTRA_CLOBBER
+#endif
+#define switch_to(prev, next, last)					\
+do {	if (test_thread_flag(TIF_PERFCTR)) {				\
+		unsigned long __tmp;					\
+		read_pcr(__tmp);					\
+		current_thread_info()->pcr_reg = __tmp;			\
+		read_pic(__tmp);					\
+		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
+		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
+	}								\
+	flush_tlb_pending();						\
+	save_and_clear_fpu();						\
+	/* If you are tempted to conditionalize the following */	\
+	/* so that ASI is only written if it changes, think again. */	\
+	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
+	: : "r" (__thread_flag_byte_ptr(next->thread_info)[TI_FLAG_BYTE_CURRENT_DS]));\
+	__asm__ __volatile__(						\
+	"mov	%%g4, %%g7\n\t"						\
+	"wrpr	%%g0, 0x95, %%pstate\n\t"				\
+	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
+	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
+	"rdpr	%%wstate, %%o5\n\t"					\
+	"stx	%%o6, [%%g6 + %3]\n\t"					\
+	"stb	%%o5, [%%g6 + %2]\n\t"					\
+	"rdpr	%%cwp, %%o5\n\t"					\
+	"stb	%%o5, [%%g6 + %5]\n\t"					\
+	"mov	%1, %%g6\n\t"						\
+	"ldub	[%1 + %5], %%g1\n\t"					\
+	"wrpr	%%g1, %%cwp\n\t"					\
+	"ldx	[%%g6 + %3], %%o6\n\t"					\
+	"ldub	[%%g6 + %2], %%o5\n\t"					\
+	"ldx	[%%g6 + %4], %%o7\n\t"					\
+	"mov	%%g6, %%l2\n\t"						\
+	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
+	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
+	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
+	"wrpr	%%g0, 0x94, %%pstate\n\t"				\
+	"mov	%%l2, %%g6\n\t"						\
+	"ldx	[%%g6 + %7], %%g4\n\t"					\
+	"wrpr	%%g0, 0x96, %%pstate\n\t"				\
+	"andcc	%%o7, %6, %%g0\n\t"					\
+	"beq,pt %%icc, 1f\n\t"						\
+	" mov	%%g7, %0\n\t"						\
+	"b,a ret_from_syscall\n\t"					\
+	"1:\n\t"							\
+	: "=&r" (last)							\
+	: "0" (next->thread_info),					\
+	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_FLAGS), "i" (TI_CWP),	\
+	  "i" (_TIF_NEWCHILD), "i" (TI_TASK)				\
+	: "cc",								\
+	        "g1", "g2", "g3",                   "g7",		\
+	              "l2", "l3", "l4", "l5", "l6", "l7",		\
+	  "i0", "i1", "i2", "i3", "i4", "i5",				\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7" EXTRA_CLOBBER);\
+	/* If you fuck with this, update ret_from_syscall code too. */	\
+	if (test_thread_flag(TIF_PERFCTR)) {				\
+		write_pcr(current_thread_info()->pcr_reg);		\
+		reset_pic();						\
+	}								\
+} while(0)
+
+static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	lduw		[%4], %2\n"
+"	cas		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%icc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	ldx		[%4], %2\n"
+"	casx		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%xcc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+				       int size)
+{
+	switch (size) {
+	case 4:
+		return xchg32(ptr, x);
+	case 8:
+		return xchg64(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+/* 
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "cas [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+static __inline__ unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "casx [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#endif /* !(__ASSEMBLY__) */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/include/asm-sparc64/termbits.h b/include/asm-sparc64/termbits.h
new file mode 100644
index 000000000000..b07715273ed4
--- /dev/null
+++ b/include/asm-sparc64/termbits.h
@@ -0,0 +1,235 @@
+#ifndef _SPARC64_TERMBITS_H
+#define _SPARC64_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+
+/* XXX is this right for sparc64?  it was an unsigned long... XXX */
+typedef unsigned int    tcflag_t;
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#define NCCS 17
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0x00000001
+#define BRKINT	0x00000002
+#define IGNPAR	0x00000004
+#define PARMRK	0x00000008
+#define INPCK	0x00000010
+#define ISTRIP	0x00000020
+#define INLCR	0x00000040
+#define IGNCR	0x00000080
+#define ICRNL	0x00000100
+#define IUCLC	0x00000200
+#define IXON	0x00000400
+#define IXANY	0x00000800
+#define IXOFF	0x00001000
+#define IMAXBEL	0x00002000
+#define IUTF8	0x00004000
+
+/* c_oflag bits */
+#define OPOST	0x00000001
+#define OLCUC	0x00000002
+#define ONLCR	0x00000004
+#define OCRNL	0x00000008
+#define ONOCR	0x00000010
+#define ONLRET	0x00000020
+#define OFILL	0x00000040
+#define OFDEL	0x00000080
+#define NLDLY	0x00000100
+#define   NL0	0x00000000
+#define   NL1	0x00000100
+#define CRDLY	0x00000600
+#define   CR0	0x00000000
+#define   CR1	0x00000200
+#define   CR2	0x00000400
+#define   CR3	0x00000600
+#define TABDLY	0x00001800
+#define   TAB0	0x00000000
+#define   TAB1	0x00000800
+#define   TAB2	0x00001000
+#define   TAB3	0x00001800
+#define   XTABS	0x00001800
+#define BSDLY	0x00002000
+#define   BS0	0x00000000
+#define   BS1	0x00002000
+#define VTDLY	0x00004000
+#define   VT0	0x00000000
+#define   VT1	0x00004000
+#define FFDLY	0x00008000
+#define   FF0	0x00000000
+#define   FF1	0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD	  0x0000100f
+#define  B0	  0x00000000   /* hang up */
+#define  B50	  0x00000001
+#define  B75	  0x00000002
+#define  B110	  0x00000003
+#define  B134	  0x00000004
+#define  B150	  0x00000005
+#define  B200	  0x00000006
+#define  B300	  0x00000007
+#define  B600	  0x00000008
+#define  B1200	  0x00000009
+#define  B1800	  0x0000000a
+#define  B2400	  0x0000000b
+#define  B4800	  0x0000000c
+#define  B9600	  0x0000000d
+#define  B19200	  0x0000000e
+#define  B38400	  0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5	  0x00000000
+#define   CS6	  0x00000010
+#define   CS7	  0x00000020
+#define   CS8	  0x00000030
+#define CSTOPB	  0x00000040
+#define CREAD	  0x00000080
+#define PARENB	  0x00000100
+#define PARODD	  0x00000200
+#define HUPCL	  0x00000400
+#define CLOCAL	  0x00000800
+#define CBAUDEX   0x00001000
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
+#define CMSPAR    0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS	  0x80000000  /* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000001
+#define ICANON	0x00000002
+#define XCASE	0x00000004
+#define ECHO	0x00000008
+#define ECHOE	0x00000010
+#define ECHOK	0x00000020
+#define ECHONL	0x00000040
+#define NOFLSH	0x00000080
+#define TOSTOP	0x00000100
+#define ECHOCTL	0x00000200
+#define ECHOPRT	0x00000400
+#define ECHOKE	0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO	0x00002000
+#define PENDIN	0x00004000
+#define IEXTEN	0x00008000
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* !(_SPARC64_TERMBITS_H) */
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
new file mode 100644
index 000000000000..8effce0da087
--- /dev/null
+++ b/include/asm-sparc64/termios.h
@@ -0,0 +1,173 @@
+/* $Id: termios.h,v 1.11 2001/06/01 08:12:11 davem Exp $ */
+#ifndef _SPARC64_TERMIOS_H
+#define _SPARC64_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct sunos_ttysize {
+	int st_lines;   /* Lines on the terminal */
+	int st_columns; /* Columns on the terminal */
+};
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN	4
+#define _VTIME	5
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		eol=\0		eol2=\0		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		dsusp=^Y
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+	0; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+	if (!((termios)->c_lflag & ICANON)) { \
+		put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+		put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+	} \
+	0; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+	get_user((k)->c_iflag, &(u)->c_iflag); \
+	get_user((k)->c_oflag, &(u)->c_oflag); \
+	get_user((k)->c_cflag, &(u)->c_cflag); \
+	get_user((k)->c_lflag, &(u)->c_lflag); \
+	get_user((k)->c_line,  &(u)->c_line); \
+	copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if((k)->c_lflag & ICANON) { \
+		get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	0; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+	put_user((k)->c_iflag, &(u)->c_iflag); \
+	put_user((k)->c_oflag, &(u)->c_oflag); \
+	put_user((k)->c_cflag, &(u)->c_cflag); \
+	put_user((k)->c_lflag, &(u)->c_lflag); \
+	put_user((k)->c_line, &(u)->c_line); \
+	copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if(!((k)->c_lflag & ICANON)) { \
+		put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	0; \
+})
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SPARC64_TERMIOS_H */
diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
new file mode 100644
index 000000000000..517caaba1c87
--- /dev/null
+++ b/include/asm-sparc64/thread_info.h
@@ -0,0 +1,252 @@
+/* $Id: thread_info.h,v 1.1 2002/02/10 00:00:58 davem Exp $
+ * thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS		7
+
+#define TI_FLAG_BYTE_FAULT_CODE		0
+#define TI_FLAG_FAULT_CODE_SHIFT	56
+#define TI_FLAG_BYTE_WSTATE		1
+#define TI_FLAG_WSTATE_SHIFT		48
+#define TI_FLAG_BYTE_CWP		2
+#define TI_FLAG_CWP_SHIFT		40
+#define TI_FLAG_BYTE_CURRENT_DS		3
+#define TI_FLAG_CURRENT_DS_SHIFT	32
+#define TI_FLAG_BYTE_FPDEPTH		4
+#define TI_FLAG_FPDEPTH_SHIFT		24
+#define TI_FLAG_BYTE_WSAVED		5
+#define TI_FLAG_WSAVED_SHIFT		16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	/* D$ line 1 */
+	struct task_struct	*task;
+	unsigned long		flags;
+	__u8			cpu;
+	__u8			fpsaved[7];
+	unsigned long		ksp;
+
+	/* D$ line 2 */
+	unsigned long		fault_address;
+	struct pt_regs		*kregs;
+	struct exec_domain	*exec_domain;
+	int			preempt_count;
+	int			__pad;
+
+	unsigned long		*utraps;
+
+	struct reg_window 	reg_window[NSWINS];
+	unsigned long 		rwbuf_stkptrs[NSWINS];
+
+	unsigned long		gsr[7];
+	unsigned long		xfsr[7];
+
+	__u64			__user *user_cntd0;
+	__u64			__user *user_cntd1;
+	__u64			kernel_cntd0, kernel_cntd1;
+	__u64			pcr_reg;
+
+	__u64			cee_stuff;
+
+	struct restart_block	restart_block;
+
+	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		0x00000000
+#define TI_FLAGS	0x00000008
+#define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS	(TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_CPU		0x00000010
+#define TI_FPSAVED	0x00000011
+#define TI_KSP		0x00000018
+#define TI_FAULT_ADDR	0x00000020
+#define TI_KREGS	0x00000028
+#define TI_EXEC_DOMAIN	0x00000030
+#define TI_PRE_COUNT	0x00000038
+#define TI_UTRAPS	0x00000040
+#define TI_REG_WINDOW	0x00000048
+#define TI_RWIN_SPTRS	0x000003c8	
+#define TI_GSR		0x00000400
+#define TI_XFSR		0x00000438
+#define TI_USER_CNTD0	0x00000470
+#define TI_USER_CNTD1	0x00000478
+#define TI_KERN_CNTD0	0x00000480
+#define TI_KERN_CNTD1	0x00000488
+#define TI_PCR		0x00000490
+#define TI_CEE_STUFF	0x00000498
+#define TI_RESTART_BLOCK 0x000004a0
+#define TI_FPREGS	0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
+#define FAULT_CODE_DTLB		0x02	/* Miss happened in D-TLB	   */
+#define FAULT_CODE_ITLB		0x04	/* Miss happened in I-TLB	   */
+#define FAULT_CODE_WINFIXUP	0x08	/* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT	0x10	/* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		=	&tsk,			\
+	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
+	.exec_domain	=	&default_exec_domain,	\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()	(current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER	1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER	0
+#endif /* PAGE_SHIFT == 13 */
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = (struct thread_info *)				\
+	  __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);	\
+	if (ret)						\
+		memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER);	\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) \
+	((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+	free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)	\
+	((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr	__thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:	fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *	----------------------------------------
+ *	| wsaved | flags byte 1 | flags byte 2 |
+ *	----------------------------------------
+ * This optimizes the user test into:
+ *	ldx		[%g6 + TI_FLAGS], REG1
+ *	sethi		%hi(_TIF_USER_WORK_MASK), REG2
+ *	or		REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *	andcc		REG1, REG2, %g0
+ *	be,pt		no_work_to_do
+ *	 nop
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_PERFCTR		4	/* performance counters active */
+#define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
+#define TIF_NEWSIGNALS		6	/* wants new-style signals */
+#define TIF_32BIT		7	/* 32-bit binary */
+#define TIF_NEWCHILD		8	/* just-spawned child process */
+/* TIF_* value 9 is available */
+#define TIF_POLLING_NRFLAG	10
+#define TIF_SYSCALL_SUCCESS	11
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING		12
+#define TIF_MEMDIE		13
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
+#define _TIF_NEWSIGNALS		(1<<TIF_NEWSIGNALS)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_NEWCHILD		(1<<TIF_NEWCHILD)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_SUCCESS	(1<<TIF_SYSCALL_SUCCESS)
+
+#define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
+				 (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
+				  _TIF_NEED_RESCHED | _TIF_PERFCTR))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
new file mode 100644
index 000000000000..ba33a2b6b7bd
--- /dev/null
+++ b/include/asm-sparc64/timer.h
@@ -0,0 +1,74 @@
+/* $Id: timer.h,v 1.3 2000/05/09 17:40:15 davem Exp $
+ * timer.h: System timer definitions for sun5.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_TIMER_H
+#define _SPARC64_TIMER_H
+
+#include <linux/types.h>
+
+/* How timers work:
+ *
+ * On uniprocessors we just use counter zero for the system wide
+ * ticker, this performs thread scheduling, clock book keeping,
+ * and runs timer based events.  Previously we used the Ultra
+ * %tick interrupt for this purpose.
+ *
+ * On multiprocessors we pick one cpu as the master level 10 tick
+ * processor.  Here this counter zero tick handles clock book
+ * keeping and timer events only.  Each Ultra has it's level
+ * 14 %tick interrupt set to fire off as well, even the master
+ * tick cpu runs this locally.  This ticker performs thread
+ * scheduling, system/user tick counting for the current thread,
+ * and also profiling if enabled.
+ */
+
+#include <linux/config.h>
+
+/* Two timers, traditionally steered to PIL's 10 and 14 respectively.
+ * But since INO packets are used on sun5, we could use any PIL level
+ * we like, however for now we use the normal ones.
+ *
+ * The 'reg' and 'interrupts' properties for these live in nodes named
+ * 'counter-timer'.  The first of three 'reg' properties describe where
+ * the sun5_timer registers are.  The other two I have no idea. (XXX)
+ */
+struct sun5_timer {
+	u64	count0;
+	u64	limit0;
+	u64	count1;
+	u64	limit1;
+};
+
+#define SUN5_LIMIT_ENABLE	0x80000000
+#define SUN5_LIMIT_TOZERO	0x40000000
+#define SUN5_LIMIT_ZRESTART	0x20000000
+#define SUN5_LIMIT_CMASK	0x1fffffff
+
+/* Given a HZ value, set the limit register to so that the timer IRQ
+ * gets delivered that often.
+ */
+#define SUN5_HZ_TO_LIMIT(__hz)  (1000000/(__hz))
+
+struct sparc64_tick_ops {
+	void (*init_tick)(unsigned long);
+	unsigned long (*get_tick)(void);
+	unsigned long (*get_compare)(void);
+	unsigned long (*add_tick)(unsigned long, unsigned long);
+	unsigned long (*add_compare)(unsigned long);
+	unsigned long softint_mask;
+};
+
+extern struct sparc64_tick_ops *tick_ops;
+
+#ifdef CONFIG_SMP
+extern unsigned long timer_tick_offset;
+struct pt_regs;
+extern void timer_tick_interrupt(struct pt_regs *);
+#endif
+
+extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+
+#endif /* _SPARC64_TIMER_H */
diff --git a/include/asm-sparc64/timex.h b/include/asm-sparc64/timex.h
new file mode 100644
index 000000000000..9e8d4175bcb2
--- /dev/null
+++ b/include/asm-sparc64/timex.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-sparc64/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()	tick_ops->get_tick()
+
+#endif
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
new file mode 100644
index 000000000000..9baf57db01d2
--- /dev/null
+++ b/include/asm-sparc64/tlb.h
@@ -0,0 +1,128 @@
+#ifndef _SPARC64_TLB_H
+#define _SPARC64_TLB_H
+
+#include <linux/config.h>
+#include <linux/swap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+#define TLB_BATCH_NR	192
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR	506
+  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
+#else
+  #define FREE_PTE_NR	1
+  #define tlb_fast_mode(bp) 1
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int pages_nr;
+	unsigned int need_flush;
+	unsigned int tlb_frozen;
+	unsigned int tlb_nr;
+	unsigned long freed;
+	unsigned long vaddrs[TLB_BATCH_NR];
+	struct page *pages[FREE_PTE_NR];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_pending(struct mm_struct *,
+				  unsigned long, unsigned long *);
+#endif
+
+extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
+extern void flush_tlb_pending(void);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
+
+	BUG_ON(mp->tlb_nr);
+
+	mp->mm = mm;
+	mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
+	mp->tlb_frozen = full_mm_flush;
+	mp->freed = 0;
+
+	return mp;
+}
+
+
+static inline void tlb_flush_mmu(struct mmu_gather *mp)
+{
+	if (mp->need_flush) {
+		mp->need_flush = 0;
+		if (!tlb_fast_mode(mp)) {
+			free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+			mp->pages_nr = 0;
+		}
+	}
+
+}
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#else
+#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
+#endif
+
+static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
+{
+	unsigned long freed = mp->freed;
+	struct mm_struct *mm = mp->mm;
+	unsigned long rss = get_mm_counter(mm, rss);
+
+	if (rss < freed)
+		freed = rss;
+	add_mm_counter(mm, rss, -freed);
+
+	tlb_flush_mmu(mp);
+
+	if (mp->tlb_frozen) {
+		if (CTX_VALID(mm->context))
+			do_flush_tlb_mm(mm);
+		mp->tlb_frozen = 0;
+	} else
+		flush_tlb_pending();
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline unsigned int tlb_is_full_mm(struct mmu_gather *mp)
+{
+	return mp->tlb_frozen;
+}
+
+static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
+{
+	mp->need_flush = 1;
+	if (tlb_fast_mode(mp)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	mp->pages[mp->pages_nr++] = page;
+	if (mp->pages_nr >= FREE_PTE_NR)
+		tlb_flush_mmu(mp);
+}
+
+#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
+#define pte_free_tlb(mp,ptepage) pte_free(ptepage)
+#define pmd_free_tlb(mp,pmdp) pmd_free(pmdp)
+#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+
+#define tlb_migrate_finish(mm)	do { } while (0)
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#endif /* _SPARC64_TLB_H */
diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h
new file mode 100644
index 000000000000..3ef9909ac3ac
--- /dev/null
+++ b/include/asm-sparc64/tlbflush.h
@@ -0,0 +1,41 @@
+#ifndef _SPARC64_TLBFLUSH_H
+#define _SPARC64_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+/* TLB flush operations. */
+
+extern void flush_tlb_pending(void);
+
+#define flush_tlb_range(vma,start,end)	\
+	do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_page(vma,addr)	flush_tlb_pending()
+#define flush_tlb_mm(mm)		flush_tlb_pending()
+
+extern void __flush_tlb_all(void);
+extern void __flush_tlb_page(unsigned long context, unsigned long page, unsigned long r);
+
+extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb_all()		__flush_tlb_all()
+#define flush_tlb_kernel_range(start,end) \
+	__flush_tlb_kernel_range(start,end)
+
+#else /* CONFIG_SMP */
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#define flush_tlb_all()		smp_flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) \
+	smp_flush_tlb_kernel_range(start, end)
+
+#endif /* ! CONFIG_SMP */
+
+extern void flush_tlb_pgtables(struct mm_struct *, unsigned long, unsigned long);
+
+#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h
new file mode 100644
index 000000000000..0e234e201bd6
--- /dev/null
+++ b/include/asm-sparc64/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC64_TOPOLOGY_H
+#define _ASM_SPARC64_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
new file mode 100644
index 000000000000..2784f80094c3
--- /dev/null
+++ b/include/asm-sparc64/ttable.h
@@ -0,0 +1,407 @@
+/* $Id: ttable.h,v 1.18 2002/02/09 19:49:32 davem Exp $ */
+#ifndef _SPARC64_TTABLE_H
+#define _SPARC64_TTABLE_H
+
+#include <linux/config.h>
+#include <asm/utrap.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
+
+/* We need a "cleaned" instruction... */
+#define CLEAN_WINDOW							\
+	rdpr	%cleanwin, %l0;		add	%l0, 1, %l0;		\
+	wrpr	%l0, 0x0, %cleanwin;					\
+	clr	%o0;	clr	%o1;	clr	%o2;	clr	%o3;	\
+	clr	%o4;	clr	%o5;	clr	%o6;	clr	%o7;	\
+	clr	%l0;	clr	%l1;	clr	%l2;	clr	%l3;	\
+	clr	%l4;	clr	%l5;	clr	%l6;	clr	%l7;	\
+	retry;								\
+	nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
+
+#define TRAP(routine)					\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;					\
+	nop;
+
+#define TRAP_7INSNS(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;
+
+#define TRAP_SAVEFPU(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, do_fptrap;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;					\
+	nop;
+
+#define TRAP_NOSAVE(routine)				\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop; nop;
+	
+#define TRAP_NOSAVE_7INSNS(routine)			\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop;
+	
+#define TRAPTL1(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;					\
+	nop;
+	
+#define TRAP_ARG(routine, arg)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;
+	
+#define TRAPTL1_ARG(routine, arg)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 clr	%l6;
+	
+#define SYSCALL_TRAP(routine, systbl)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, scetrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	sethi	%hi(systbl), %l7;			\
+	ba,pt	%xcc, routine;				\
+	 or	%l7, %lo(systbl), %l7;			\
+	nop; nop;
+	
+#define INDIRECT_SOLARIS_SYSCALL(num)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	ba,pt	%xcc, tl0_solaris + 0xc;		\
+	 mov	num, %g1;				\
+	nop;nop;nop;
+	
+#define TRAP_UTRAP(handler,lvl)				\
+	ldx	[%g6 + TI_UTRAPS], %g1;			\
+	sethi	%hi(109f), %g7;				\
+	brz,pn	%g1, utrap;				\
+	 or	%g7, %lo(109f), %g7;			\
+	ba,pt	%xcc, utrap;				\
+109:	 ldx	[%g1 + handler*8], %g1;			\
+	ba,pt	%xcc, utrap_ill;			\
+	 mov	lvl, %o1;
+
+#ifdef CONFIG_SUNOS_EMUL
+#define SUNOS_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sunos_sys_table)
+#else
+#define SUNOS_SYSCALL_TRAP TRAP(sunos_syscall)
+#endif
+#ifdef CONFIG_COMPAT
+#define	LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
+#else
+#define	LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
+#endif
+#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
+#define GETCC_TRAP TRAP(getcc)
+#define SETCC_TRAP TRAP(setcc)
+#ifdef CONFIG_SOLARIS_EMUL
+#define SOLARIS_SYSCALL_TRAP TRAP(solaris_sparc_syscall)
+#else
+#define SOLARIS_SYSCALL_TRAP TRAP(solaris_syscall)
+#endif
+/* FIXME: Write these actually */	
+#define NETBSD_SYSCALL_TRAP TRAP(netbsd_syscall)
+#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	b,pt	%xcc, etrap_irq;			\
+	 rd	%pc, %g7;				\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;
+	
+#define TICK_SMP_IRQ					\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	sethi	%hi(109f), %g7;				\
+	b,pt	%xcc, etrap_irq;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	smp_percpu_timer_interrupt;		\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,a,pt	%xcc, rtrap_irq;
+
+#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
+
+#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
+
+#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
+
+#define FLUSH_WINDOW_TRAP						\
+	ba,pt	%xcc, etrap;						\
+	 rd	%pc, %g7;						\
+	flushw;								\
+	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1;			\
+	add	%l1, 4, %l2;						\
+	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC];			\
+	ba,pt	%xcc, rtrap_clr_l6;					\
+	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
+	        
+#ifdef CONFIG_KPROBES
+#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
+#else
+#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+/* Before touching these macros, you owe it to yourself to go and
+ * see how arch/sparc64/kernel/winfixup.S works... -DaveM
+ *
+ * For the user cases we used to use the %asi register, but
+ * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
+ * now we use immediate ASI loads and stores instead.  Kudos
+ * to Greg Onufer for pointing out this performance anomaly.
+ *
+ * Further note that we cannot use the g2, g4, g5, and g7 alternate
+ * globals in the spill routines, check out the save instruction in
+ * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
+ * g4/g5 are the globals which are preserved by etrap processing
+ * for the caller of it.  The g7 register is the return pc for
+ * etrap.  Finally, g6 is the current thread register so we cannot
+ * us it in the spill handlers either.  Most of these rules do not
+ * apply to fill processing, only g6 is not usable.
+ */
+
+/* Normal kernel spill */
+#define SPILL_0_NORMAL					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+/* Normal 64bit spill */
+#define SPILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	stxa	%l0, [%g1 + %g0] ASI;			\
+	mov	0x08, %g3;				\
+	stxa	%l1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l2, [%g1 + %g0] ASI;			\
+	stxa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l4, [%g1 + %g0] ASI;			\
+	stxa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l6, [%g1 + %g0] ASI;			\
+	stxa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i0, [%g1 + %g0] ASI;			\
+	stxa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i2, [%g1 + %g0] ASI;			\
+	stxa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i4, [%g1 + %g0] ASI;			\
+	stxa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i6, [%g1 + %g0] ASI;			\
+	stxa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+	retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+/* Normal 32bit spill */
+#define SPILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	stwa	%l0, [%sp + %g0] ASI;			\
+	mov	0x04, %g3;				\
+	stwa	%l1, [%sp + %g3] ASI;			\
+	add	%sp, 0x08, %g1;				\
+	stwa	%l2, [%g1 + %g0] ASI;			\
+	stwa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l4, [%g1 + %g0] ASI;			\
+	stwa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l6, [%g1 + %g0] ASI;			\
+	stwa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i0, [%g1 + %g0] ASI;			\
+	stwa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i2, [%g1 + %g0] ASI;			\
+	stwa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i4, [%g1 + %g0] ASI;			\
+	stwa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i6, [%g1 + %g0] ASI;			\
+	stwa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+        retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
+#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
+#define SPILL_3_NORMAL SPILL_0_NORMAL
+#define SPILL_4_NORMAL SPILL_0_NORMAL
+#define SPILL_5_NORMAL SPILL_0_NORMAL
+#define SPILL_6_NORMAL SPILL_0_NORMAL
+#define SPILL_7_NORMAL SPILL_0_NORMAL
+
+#define SPILL_0_OTHER SPILL_0_NORMAL
+#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
+#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
+#define SPILL_3_OTHER SPILL_3_NORMAL
+#define SPILL_4_OTHER SPILL_4_NORMAL
+#define SPILL_5_OTHER SPILL_5_NORMAL
+#define SPILL_6_OTHER SPILL_6_NORMAL
+#define SPILL_7_OTHER SPILL_7_NORMAL
+
+/* Normal kernel fill */
+#define FILL_0_NORMAL					\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+/* Normal 64bit fill */
+#define FILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	ldxa	[%g1 + %g0] ASI, %l0;			\
+	mov	0x08, %g2;				\
+	mov	0x10, %g3;				\
+	ldxa	[%g1 + %g2] ASI, %l1;			\
+	mov	0x18, %g5;				\
+	ldxa	[%g1 + %g3] ASI, %l2;			\
+	ldxa	[%g1 + %g5] ASI, %l3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %l4;			\
+	ldxa	[%g1 + %g2] ASI, %l5;			\
+	ldxa	[%g1 + %g3] ASI, %l6;			\
+	ldxa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i0;			\
+	ldxa	[%g1 + %g2] ASI, %i1;			\
+	ldxa	[%g1 + %g3] ASI, %i2;			\
+	ldxa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i4;			\
+	ldxa	[%g1 + %g2] ASI, %i5;			\
+	ldxa	[%g1 + %g3] ASI, %i6;			\
+	ldxa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+/* Normal 32bit fill */
+#define FILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + %g0] ASI, %l0;			\
+	mov	0x04, %g2;				\
+	mov	0x08, %g3;				\
+	lduwa	[%sp + %g2] ASI, %l1;			\
+	mov	0x0c, %g5;				\
+	lduwa	[%sp + %g3] ASI, %l2;			\
+	lduwa	[%sp + %g5] ASI, %l3;			\
+	add	%sp, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %l4;			\
+	lduwa	[%g1 + %g2] ASI, %l5;			\
+	lduwa	[%g1 + %g3] ASI, %l6;			\
+	lduwa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i0;			\
+	lduwa	[%g1 + %g2] ASI, %i1;			\
+	lduwa	[%g1 + %g3] ASI, %i2;			\
+	lduwa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i4;			\
+	lduwa	[%g1 + %g2] ASI, %i5;			\
+	lduwa	[%g1 + %g3] ASI, %i6;			\
+	lduwa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
+#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
+#define FILL_3_NORMAL FILL_0_NORMAL
+#define FILL_4_NORMAL FILL_0_NORMAL
+#define FILL_5_NORMAL FILL_0_NORMAL
+#define FILL_6_NORMAL FILL_0_NORMAL
+#define FILL_7_NORMAL FILL_0_NORMAL
+
+#define FILL_0_OTHER FILL_0_NORMAL
+#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
+#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
+#define FILL_3_OTHER FILL_3_NORMAL
+#define FILL_4_OTHER FILL_4_NORMAL
+#define FILL_5_OTHER FILL_5_NORMAL
+#define FILL_6_OTHER FILL_6_NORMAL
+#define FILL_7_OTHER FILL_7_NORMAL
+
+#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
new file mode 100644
index 000000000000..6248ed1a9a7a
--- /dev/null
+++ b/include/asm-sparc64/types.h
@@ -0,0 +1,65 @@
+/* $Id: types.h,v 1.4 2001/10/09 02:24:35 davem Exp $ */
+#ifndef _SPARC64_TYPES_H
+#define _SPARC64_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space.
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long s64;
+typedef unsigned long u64;
+
+/* Dma addresses come in generic and 64-bit flavours.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_TYPES_H) */
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
new file mode 100644
index 000000000000..5690142f82de
--- /dev/null
+++ b/include/asm-sparc64/uaccess.h
@@ -0,0 +1,335 @@
+/* $Id: uaccess.h,v 1.35 2002/02/09 19:49:31 davem Exp $ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/a.out.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/uaccess.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc64 is segmented, though more like the M68K than the I386. 
+ * We use the secondary ASI to address user memory, which references a
+ * completely different VM map, thus there is zero chance of the user
+ * doing something queer and tricking us into poking kernel memory.
+ *
+ * What is left here is basically what is needed for the other parts of
+ * the kernel that expect to be able to manipulate, erum, "segments".
+ * Or perhaps more properly, permissions.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { ASI_P })
+#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
+#define get_ds() (KERNEL_DS)
+
+#define segment_eq(a,b)  ((a).seg == (b).seg)
+
+#define set_fs(val)								\
+do {										\
+	set_thread_current_ds((val).seg);					\
+	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
+} while(0)
+
+static inline int __access_ok(const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+static inline int access_ok(int type, const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return 0;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned insn, fixup;
+};
+
+/* Special exable search, which handles ranges.  Returns fixup */
+unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+#define __put_user(x,ptr) put_user(x,ptr)
+#define __get_user(x,ptr) get_user(x,ptr)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct *)(x))
+
+#define __put_user_nocheck(data,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
+case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_nocheck_ret(data,addr,size,retval) ({ \
+register int __foo __asm__ ("l1"); \
+switch (size) { \
+case 1: __put_user_asm_ret(data,b,addr,retval,__foo); break; \
+case 2: __put_user_asm_ret(data,h,addr,retval,__foo); break; \
+case 4: __put_user_asm_ret(data,w,addr,retval,__foo); break; \
+case 8: __put_user_asm_ret(data,x,addr,retval,__foo); break; \
+default: if (__put_user_bad()) return retval; break; \
+} })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (ret) : "r" (x), "r" (__m(addr)),				\
+	 "i" (-EFAULT))
+
+#define __put_user_asm_ret(x,size,addr,ret,foo)				\
+if (__builtin_constant_p(ret) && ret == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Put user asm ret, inline. */\n"				\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\n\t"				\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, __ret_efault\n\n\t"					\
+	".previous\n\n\t"						\
+       : "=r" (foo) : "r" (x), "r" (__m(addr)));			\
+else									\
+__asm__ __volatile__(							\
+	"/* Put user asm ret, inline. */\n"				\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\n\t"				\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %3, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (foo) : "r" (x), "r" (__m(addr)),				\
+         "i" (ret))
+
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(data,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} data = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} data = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size "a [%2] %%asi, %1\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"clr	%1\n\t"							\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (ret), "=r" (x) : "r" (__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __must_check ___copy_from_user(void *to,
+						    const void __user *from,
+						    unsigned long size);
+extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
+					  unsigned long size);
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_from_user(to, from, size);
+
+	if (ret)
+		ret = copy_from_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_from_user copy_from_user
+
+extern unsigned long __must_check ___copy_to_user(void __user *to,
+						  const void *from,
+						  unsigned long size);
+extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	unsigned long ret = ___copy_to_user(to, from, size);
+
+	if (ret)
+		ret = copy_to_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_to_user copy_to_user
+
+extern unsigned long __must_check ___copy_in_user(void __user *to,
+						  const void __user *from,
+						  unsigned long size);
+extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_in_user(void __user *to, void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_in_user(to, from, size);
+
+	if (ret)
+		ret = copy_in_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_in_user copy_in_user
+
+extern unsigned long __must_check __bzero_noasi(void __user *, unsigned long);
+
+static inline unsigned long __must_check
+__clear_user(void __user *addr, unsigned long size)
+{
+	
+	return __bzero_noasi(addr, size);
+}
+
+#define clear_user __clear_user
+
+extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
+
+#define strncpy_from_user __strncpy_from_user
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+#define strlen_user __strlen_user
+#define strnlen_user __strnlen_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-sparc64/uctx.h b/include/asm-sparc64/uctx.h
new file mode 100644
index 000000000000..6eaf16ef23f6
--- /dev/null
+++ b/include/asm-sparc64/uctx.h
@@ -0,0 +1,71 @@
+/* $Id: uctx.h,v 1.1 1997/06/18 16:51:58 davem Exp $
+ * uctx.h: Sparc64 {set,get}context() register state layouts.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_UCTX_H
+#define __SPARC64_UCTX_H
+
+#define MC_TSTATE	0
+#define MC_PC		1
+#define MC_NPC		2
+#define MC_Y		3
+#define MC_G1		4
+#define MC_G2		5
+#define MC_G3		6
+#define MC_G4		7
+#define MC_G5		8
+#define MC_G6		9
+#define MC_G7		10
+#define MC_O0		11
+#define MC_O1		12
+#define MC_O2		13
+#define MC_O3		14
+#define MC_O4		15
+#define MC_O5		16
+#define MC_O6		17
+#define MC_O7		18
+#define MC_NGREG	19
+
+typedef unsigned long mc_greg_t;
+typedef mc_greg_t mc_gregset_t[MC_NGREG];
+
+#define MC_MAXFPQ	16
+struct mc_fq {
+	unsigned long	*mcfq_addr;
+	unsigned int	mcfq_insn;
+};
+
+struct mc_fpu {
+	union {
+		unsigned int	sregs[32];
+		unsigned long	dregs[32];
+		long double	qregs[16];
+	} mcfpu_fregs;
+	unsigned long	mcfpu_fsr;
+	unsigned long	mcfpu_fprs;
+	unsigned long	mcfpu_gsr;
+	struct mc_fq	*mcfpu_fq;
+	unsigned char	mcfpu_qcnt;
+	unsigned char	mcfpu_qentsz;
+	unsigned char	mcfpu_enab;
+};
+typedef struct mc_fpu mc_fpu_t;
+
+typedef struct {
+	mc_gregset_t	mc_gregs;
+	mc_greg_t	mc_fp;
+	mc_greg_t	mc_i7;
+	mc_fpu_t	mc_fpregs;
+} mcontext_t;
+
+struct ucontext {
+	struct ucontext		*uc_link;
+	unsigned long		uc_flags;
+	sigset_t		uc_sigmask;
+	mcontext_t		uc_mcontext;
+};
+typedef struct ucontext ucontext_t;
+
+#endif /* __SPARC64_UCTX_H */
diff --git a/include/asm-sparc64/unaligned.h b/include/asm-sparc64/unaligned.h
new file mode 100644
index 000000000000..1ed3ba537772
--- /dev/null
+++ b/include/asm-sparc64/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC64_UNALIGNED_H_
+#define _ASM_SPARC64_UNALIGNED_H_
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_SPARC64_UNALIGNED_H */
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
new file mode 100644
index 000000000000..3c00065eea80
--- /dev/null
+++ b/include/asm-sparc64/unistd.h
@@ -0,0 +1,514 @@
+/* $Id: unistd.h,v 1.50 2002/02/08 03:57:18 davem Exp $ */
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+/* #define __NR_time alias	 25    ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering	 52 /* Linux Specific				   */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+/* #define __NR_fstat64          63    Linux sparc32 Specific                      */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+/* #define __NR_lstat64		132    Linux sparc32 Specific                      */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+/* #define __NR_stat64		139    Linux sparc32 Specific			   */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit		144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+/* #define __NR_getmsg          151    SunOS Specific                              */
+/* #define __NR_putmsg          152    SunOS Specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+/* #define __NR_getdirentries   156    SunOS Specific                              */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+/* #define __NR_ulimit          196    Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+/* #define __NR_modify_ldt      218    Linux Specific - i386 specific, unused      */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time		231 /* Linux sparc32                               */
+#endif
+/* #define __NR_oldstat         232    Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_aplib              255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+/*#define __NR_sys_setaltroot	280 available (was setaltroot) */
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+
+/* WARNING: You MAY NOT add syscall numbers larger than 283, since
+ *          all of the syscall tables in the Sparc kernel are
+ *          sized to have 283 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-282 range.
+ */
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res)\
+		      : "r" (__g1) \
+		      : "o0", "cc"); \
+if (__res >= 0) \
+    return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__g1) \
+		      : "cc"); \
+if (__res >= 0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__g1) \
+		      : "cc"); \
+if (__res >= 0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
+		      : "cc"); \
+if (__res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
+		      : "cc"); \
+if (__res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+register long __g1 __asm__ ("g1") = __NR_##name; \
+register long __o0 __asm__ ("o0") = (long)(arg1); \
+register long __o1 __asm__ ("o1") = (long)(arg2); \
+register long __o2 __asm__ ("o2") = (long)(arg3); \
+register long __o3 __asm__ ("o3") = (long)(arg4); \
+register long __o4 __asm__ ("o4") = (long)(arg5); \
+__asm__ __volatile__ ("t 0x6d\n\t" \
+		      "sub %%g0, %%o0, %0\n\t" \
+		      "movcc %%xcc, %%o0, %0\n\t" \
+		      : "=r" (__res), "=&r" (__o0) \
+		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
+		      : "cc"); \
+if (__res>=0) \
+	return (type) __res; \
+errno = -__res; \
+return -1; \
+}
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+static __inline__ _syscall0(pid_t,setsid)
+static __inline__ _syscall3(int,write,int,fd,__const__ char *,buf,off_t,count)
+static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static __inline__ _syscall1(int,dup,int,fd)
+static __inline__ _syscall3(int,execve,__const__ char *,file,char **,argv,char **,envp)
+static __inline__ _syscall3(int,open,__const__ char *,file,int,flag,int,mode)
+static __inline__ _syscall1(int,close,int,fd)
+static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+#include <linux/linkage.h>
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				unsigned long prot, unsigned long flags,
+				unsigned long fd, unsigned long off);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				void __user *restorer,
+				size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+#ifdef __KERNEL__
+/* sysconf options, for SunOS compatibility */
+#define   _SC_ARG_MAX             1
+#define   _SC_CHILD_MAX           2
+#define   _SC_CLK_TCK             3
+#define   _SC_NGROUPS_MAX         4
+#define   _SC_OPEN_MAX            5
+#define   _SC_JOB_CONTROL         6
+#define   _SC_SAVED_IDS           7
+#define   _SC_VERSION             8
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* _SPARC64_UNISTD_H */
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
new file mode 100644
index 000000000000..7ae09a22e408
--- /dev/null
+++ b/include/asm-sparc64/upa.h
@@ -0,0 +1,110 @@
+/* $Id: upa.h,v 1.3 1999/09/21 14:39:47 davem Exp $ */
+#ifndef _SPARC64_UPA_H
+#define _SPARC64_UPA_H
+
+#include <asm/asi.h>
+
+/* UPA level registers and defines. */
+
+/* UPA Config Register */
+#define UPA_CONFIG_RESV		0xffffffffc0000000 /* Reserved.                    */
+#define UPA_CONFIG_PCON		0x000000003fc00000 /* Depth of various sys queues. */
+#define UPA_CONFIG_MID		0x00000000003e0000 /* Module ID.                   */
+#define UPA_CONFIG_PCAP		0x000000000001ffff /* Port Capabilities.           */
+
+/* UPA Port ID Register */
+#define UPA_PORTID_FNP		0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
+#define UPA_PORTID_RESV		0x00fffff800000000 /* Reserved.                    */
+#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
+#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
+#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
+#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
+#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
+#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
+#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
+
+/* UPA I/O space accessors */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+static __inline__ unsigned char _upa_readb(unsigned long addr)
+{
+	unsigned char ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ unsigned short _upa_readw(unsigned long addr)
+{
+	unsigned short ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ unsigned int _upa_readl(unsigned long addr)
+{
+	unsigned int ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ unsigned long _upa_readq(unsigned long addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static __inline__ void _upa_writeb(unsigned char b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
+			     : /* no outputs */
+			     : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _upa_writew(unsigned short w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
+			     : /* no outputs */
+			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _upa_writel(unsigned int l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
+			     : /* no outputs */
+			     : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static __inline__ void _upa_writeq(unsigned long q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
+			     : /* no outputs */
+			     : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define upa_readb(__addr)		(_upa_readb((unsigned long)(__addr)))
+#define upa_readw(__addr)		(_upa_readw((unsigned long)(__addr)))
+#define upa_readl(__addr)		(_upa_readl((unsigned long)(__addr)))
+#define upa_readq(__addr)		(_upa_readq((unsigned long)(__addr)))
+#define upa_writeb(__b, __addr)		(_upa_writeb((__b), (unsigned long)(__addr)))
+#define upa_writew(__w, __addr)		(_upa_writew((__w), (unsigned long)(__addr)))
+#define upa_writel(__l, __addr)		(_upa_writel((__l), (unsigned long)(__addr)))
+#define upa_writeq(__q, __addr)		(_upa_writeq((__q), (unsigned long)(__addr)))
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+#endif /* !(_SPARC64_UPA_H) */
diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h
new file mode 100644
index 000000000000..fce4e857dfc3
--- /dev/null
+++ b/include/asm-sparc64/user.h
@@ -0,0 +1,60 @@
+/* $Id: user.h,v 1.1 1996/12/26 14:22:44 davem Exp $
+ * asm-sparc64/user.h: Core file definitions for the Sparc.
+ *
+ * Keep in sync with reg.h.  Actually, we could get rid of this
+ * one, since we won't a.out core dump that much anyways - miguel.
+ * Copyright (C) 1995 (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC64_USER_H
+#define _SPARC64_USER_H
+
+#include <asm/a.out.h>
+struct sunos_regs {
+	unsigned int psr, pc, npc, y;
+	unsigned int regs[15];
+};
+
+struct sunos_fpqueue {
+	unsigned int *addr;
+	unsigned int inst;
+};
+
+struct sunos_fp {
+	union {
+		unsigned int regs[32];
+		double reg_dbls[16];
+	} fregs;
+	unsigned int fsr;
+	unsigned int flags;
+	unsigned int extra;
+	unsigned int fpq_count;
+	struct sunos_fpqueue fpq[16];
+};
+
+struct sunos_fpu {
+	struct sunos_fp fpstatus;
+};
+
+/* The SunOS core file header layout. */
+struct user {
+	unsigned int magic;
+	unsigned int len;
+	struct sunos_regs regs;
+	struct exec uexec;
+	int           signal;
+	size_t        u_tsize; /* all of these in bytes! */
+	size_t        u_dsize;
+	size_t        u_ssize;
+	char          u_comm[17];
+	struct sunos_fpu fpu;
+	unsigned int  sigcode;   /* Special sigcontext subcode, if any */
+};
+
+#define NBPG                   PAGE_SIZE /* XXX 4096 maybe? */
+#define UPAGES                 1
+#define HOST_TEXT_START_ADDR   (u.start_code)
+#define HOST_DATA_START_ADDR   (u.start_data)
+#define HOST_STACK_END_ADDR    (u.start_stack + u.u_ssize * NBPG)
+#define SUNOS_CORE_MAGIC       0x080456
+
+#endif /* !(_SPARC64_USER_H) */
diff --git a/include/asm-sparc64/utrap.h b/include/asm-sparc64/utrap.h
new file mode 100644
index 000000000000..81b0ebf3736c
--- /dev/null
+++ b/include/asm-sparc64/utrap.h
@@ -0,0 +1,51 @@
+/* $Id: utrap.h,v 1.1 1997/10/14 16:21:31 jj Exp $
+ * include/asm-sparc64/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION		1
+#define UT_INSTRUCTION_ERROR			2
+#define UT_INSTRUCTION_PROTECTION		3
+#define UT_ILLTRAP_INSTRUCTION			4
+#define UT_ILLEGAL_INSTRUCTION			5
+#define UT_PRIVILEGED_OPCODE			6
+#define UT_FP_DISABLED				7
+#define UT_FP_EXCEPTION_IEEE_754		8
+#define UT_FP_EXCEPTION_OTHER			9
+#define UT_TAG_OVERVIEW				10
+#define UT_DIVISION_BY_ZERO			11
+#define UT_DATA_EXCEPTION			12
+#define UT_DATA_ERROR				13
+#define UT_DATA_PROTECTION			14
+#define UT_MEM_ADDRESS_NOT_ALIGNED		15
+#define UT_PRIVILEGED_ACTION			16
+#define UT_ASYNC_DATA_ERROR			17
+#define UT_TRAP_INSTRUCTION_16			18
+#define UT_TRAP_INSTRUCTION_17			19
+#define UT_TRAP_INSTRUCTION_18			20
+#define UT_TRAP_INSTRUCTION_19			21
+#define UT_TRAP_INSTRUCTION_20			22
+#define UT_TRAP_INSTRUCTION_21			23
+#define UT_TRAP_INSTRUCTION_22			24
+#define UT_TRAP_INSTRUCTION_23			25
+#define UT_TRAP_INSTRUCTION_24			26
+#define UT_TRAP_INSTRUCTION_25			27
+#define UT_TRAP_INSTRUCTION_26			28
+#define UT_TRAP_INSTRUCTION_27			29
+#define UT_TRAP_INSTRUCTION_28			30
+#define UT_TRAP_INSTRUCTION_29			31
+#define UT_TRAP_INSTRUCTION_30			32
+#define UT_TRAP_INSTRUCTION_31			33
+
+#define	UTH_NOCHANGE				(-1)
+
+#ifndef __ASSEMBLY__ 
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc64/vga.h b/include/asm-sparc64/vga.h
new file mode 100644
index 000000000000..9c57eb363b40
--- /dev/null
+++ b/include/asm-sparc64/vga.h
@@ -0,0 +1,33 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/types.h>
+
+#define VT_BUF_HAVE_RW
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	*addr = val;
+}
+
+static inline u16 scr_readw(const u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	return *addr;
+}
+
+#define VGA_MAP_MEM(x) (x)
+
+#endif
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
new file mode 100644
index 000000000000..a74078551e0f
--- /dev/null
+++ b/include/asm-sparc64/visasm.h
@@ -0,0 +1,63 @@
+/* $Id: visasm.h,v 1.5 2001/04/24 01:09:12 davem Exp $ */
+#ifndef _SPARC64_VISASM_H
+#define _SPARC64_VISASM_H
+
+/* visasm.h:  FPU saving macros for VIS routines
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+ 
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
+
+#define VISEntry					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, (FPRS_FEF|FPRS_DU), %g0;	\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(297f), %g7;			\
+	sethi		%hi(VISenter), %g1;		\
+	jmpl		%g1 + %lo(VISenter), %g0;	\
+	 or		%g7, %lo(297f), %g7;		\
+297:	wr		%g0, FPRS_FEF, %fprs;		\
+
+#define VISExit						\
+	wr		%g0, 0, %fprs;
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
+ * Must preserve %o5 between VISEntryHalf and VISExitHalf */
+
+#define VISEntryHalf					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, FPRS_FEF, %g0;		\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(298f), %g7;			\
+	sethi		%hi(VISenterhalf), %g1;		\
+	jmpl		%g1 + %lo(VISenterhalf), %g0;	\
+	 or		%g7, %lo(298f), %g7;		\
+	clr		%o5;				\
+297:	wr		%o5, FPRS_FEF, %fprs;		\
+298:
+
+#define VISExitHalf					\
+	wr		%o5, 0, %fprs;
+
+#ifndef __ASSEMBLY__	
+static __inline__ void save_and_clear_fpu(void) {
+	__asm__ __volatile__ (
+"		rd %%fprs, %%o5\n"
+"		andcc %%o5, %0, %%g0\n"
+"		be,pt %%icc, 299f\n"
+"		 sethi %%hi(298f), %%g7\n"
+"		sethi %%hi(VISenter), %%g1\n"
+"		jmpl %%g1 + %%lo(VISenter), %%g0\n"
+"		 or %%g7, %%lo(298f), %%g7\n"
+"	298:	wr %%g0, 0, %%fprs\n"
+"	299:\n"
+"		" : : "i" (FPRS_FEF|FPRS_DU) :
+		"o5", "g1", "g2", "g3", "g7", "cc");
+}
+#endif
+
+#endif /* _SPARC64_ASI_H */
diff --git a/include/asm-sparc64/vuid_event.h b/include/asm-sparc64/vuid_event.h
new file mode 100644
index 000000000000..9ef4d17ad08f
--- /dev/null
+++ b/include/asm-sparc64/vuid_event.h
@@ -0,0 +1,40 @@
+/* SunOS Virtual User Input Device (VUID) compatibility */
+
+typedef struct firm_event {
+	unsigned short id;	  /* tag for this event */
+	unsigned char  pair_type; /* unused by X11 */
+        unsigned char  pair;	  /* unused by X11 */
+        int            value;	  /* VKEY_UP, VKEY_DOWN or delta */
+        struct timeval time;
+} Firm_event;
+
+enum {
+    FE_PAIR_NONE,
+    FE_PAIR_SET,
+    FE_PAIR_DELTA,
+    FE_PAIR_ABSOLUTE
+};
+
+/* VUID stream formats */
+#define VUID_NATIVE     0	/* Native byte stream format */
+#define VUID_FIRM_EVENT 1	/* send firm_event structures */
+
+/* ioctls */
+    /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */
+#define VUIDSFORMAT   _IOW('v', 1, int)
+    /* Retrieve input device byte stream format */
+#define VUIDGFORMAT   _IOR('v', 2, int)
+
+/* Possible tag values */
+/*    mouse buttons: */
+#define MS_LEFT         0x7f20
+#define MS_MIDDLE       0x7f21
+#define MS_RIGHT        0x7f22
+/*    motion: */
+#define LOC_X_DELTA     0x7f80
+#define LOC_Y_DELTA     0x7f81
+#define LOC_X_ABSOLUTE  0x7f82  /* X compat, unsupported */
+#define LOC_Y_ABSOLUTE  0x7f83  /* X compat, unsupported */
+
+#define VKEY_UP   0
+#define VKEY_DOWN 1
diff --git a/include/asm-sparc64/watchdog.h b/include/asm-sparc64/watchdog.h
new file mode 100644
index 000000000000..4d5b03b60e4d
--- /dev/null
+++ b/include/asm-sparc64/watchdog.h
@@ -0,0 +1,31 @@
+/* $Id: watchdog.h,v 1.1 2001/01/18 04:47:44 davem Exp $
+ *
+ * watchdog - Driver interface for the hardware watchdog timers
+ * present on Sun Microsystems boardsets
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef _SPARC64_WATCHDOG_H
+#define _SPARC64_WATCHDOG_H
+
+#include <linux/watchdog.h>
+
+/* Solaris compatibility ioctls--
+ * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
+ */
+#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)		/* Start Timer		*/
+#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)		/* Stop Timer		*/
+#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status	*/
+
+/* Status flags from WIOCGSTAT ioctl
+ */
+#define WD_FREERUN	0x01	/* timer is running, interrupts disabled	*/
+#define WD_EXPIRED	0x02	/* timer has expired						*/
+#define WD_RUNNING	0x04	/* timer is running, interrupts enabled		*/
+#define WD_STOPPED	0x08	/* timer has not been started				*/
+#define WD_SERVICED 0x10	/* timer interrupt was serviced				*/
+
+#endif /* ifndef _SPARC64_WATCHDOG_H */
+
diff --git a/include/asm-sparc64/xor.h b/include/asm-sparc64/xor.h
new file mode 100644
index 000000000000..8b3a7e4b6062
--- /dev/null
+++ b/include/asm-sparc64/xor.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-sparc64/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/pstate.h>
+#include <asm/asi.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name	= "VIS",
+        .do_2	= xor_vis_2,
+        .do_3	= xor_vis_3,
+        .do_4	= xor_vis_4,
+        .do_5	= xor_vis_5,
+};
+
+#define XOR_TRY_TEMPLATES       xor_speed(&xor_block_VIS)
diff --git a/include/asm-um/a.out.h b/include/asm-um/a.out.h
new file mode 100644
index 000000000000..7c26265e1d7a
--- /dev/null
+++ b/include/asm-um/a.out.h
@@ -0,0 +1,20 @@
+#ifndef __UM_A_OUT_H
+#define __UM_A_OUT_H
+
+#include "linux/config.h"
+#include "asm/arch/a.out.h"
+#include "choose-mode.h"
+
+#undef STACK_TOP
+
+extern unsigned long stacksizelim;
+
+extern unsigned long host_task_size;
+
+#define STACK_ROOM (stacksizelim)
+
+extern int honeypot;
+#define STACK_TOP \
+	CHOOSE_MODE((honeypot ? host_task_size : task_size), task_size)
+
+#endif
diff --git a/include/asm-um/apic.h b/include/asm-um/apic.h
new file mode 100644
index 000000000000..876dee84ab11
--- /dev/null
+++ b/include/asm-um/apic.h
@@ -0,0 +1,4 @@
+#ifndef __UM_APIC_H
+#define __UM_APIC_H
+
+#endif
diff --git a/include/asm-um/arch-signal-i386.h b/include/asm-um/arch-signal-i386.h
new file mode 100644
index 000000000000..99a9de4728da
--- /dev/null
+++ b/include/asm-um/arch-signal-i386.h
@@ -0,0 +1,24 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCH_SIGNAL_I386_H
+#define __UM_ARCH_SIGNAL_I386_H
+
+struct arch_signal_context {
+	unsigned long extrasigs[_NSIG_WORDS];
+};
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/archparam-i386.h b/include/asm-um/archparam-i386.h
new file mode 100644
index 000000000000..6f78de5b621b
--- /dev/null
+++ b/include/asm-um/archparam-i386.h
@@ -0,0 +1,163 @@
+/* 
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_I386_H
+#define __UM_ARCHPARAM_I386_H
+
+/********* Bits for asm-um/elf.h ************/
+
+#include <asm/user.h>
+
+extern char * elf_aux_platform;
+#define ELF_PLATFORM (elf_aux_platform)
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+typedef struct user_i387_struct elf_fpregset_t;
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_386
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+	PT_REGS_EBX(regs) = 0; \
+	PT_REGS_ECX(regs) = 0; \
+	PT_REGS_EDX(regs) = 0; \
+	PT_REGS_ESI(regs) = 0; \
+	PT_REGS_EDI(regs) = 0; \
+	PT_REGS_EBP(regs) = 0; \
+	PT_REGS_EAX(regs) = 0; \
+} while(0)
+
+/* Shamelessly stolen from include/asm-i386/elf.h */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) do {	\
+	pr_reg[0] = PT_REGS_EBX(regs);		\
+	pr_reg[1] = PT_REGS_ECX(regs);		\
+	pr_reg[2] = PT_REGS_EDX(regs);		\
+	pr_reg[3] = PT_REGS_ESI(regs);		\
+	pr_reg[4] = PT_REGS_EDI(regs);		\
+	pr_reg[5] = PT_REGS_EBP(regs);		\
+	pr_reg[6] = PT_REGS_EAX(regs);		\
+	pr_reg[7] = PT_REGS_DS(regs);		\
+	pr_reg[8] = PT_REGS_ES(regs);		\
+	/* fake once used fs and gs selectors? */	\
+	pr_reg[9] = PT_REGS_DS(regs);		\
+	pr_reg[10] = PT_REGS_DS(regs);		\
+	pr_reg[11] = PT_REGS_SYSCALL_NR(regs);	\
+	pr_reg[12] = PT_REGS_IP(regs);		\
+	pr_reg[13] = PT_REGS_CS(regs);		\
+	pr_reg[14] = PT_REGS_EFLAGS(regs);	\
+	pr_reg[15] = PT_REGS_SP(regs);		\
+	pr_reg[16] = PT_REGS_SS(regs);		\
+} while(0);
+
+
+extern unsigned long vsyscall_ehdr;
+extern unsigned long vsyscall_end;
+extern unsigned long __kernel_vsyscall;
+
+#define VSYSCALL_BASE vsyscall_ehdr
+#define VSYSCALL_END vsyscall_end
+
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START      VSYSCALL_BASE
+#define FIXADDR_USER_END        VSYSCALL_END
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+
+#define ARCH_DLINFO						\
+do {								\
+	if ( vsyscall_ehdr ) {					\
+		NEW_AUX_ENT(AT_SYSINFO,	__kernel_vsyscall);	\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr);	\
+	}							\
+} while (0)
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the vsyscall DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the vsyscall DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS						      \
+	(vsyscall_ehdr ? (((struct elfhdr *)vsyscall_ehdr)->e_phnum) : 0 )
+
+#define ELF_CORE_WRITE_EXTRA_PHDRS					      \
+if ( vsyscall_ehdr ) {							      \
+	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
+	const struct elf_phdr *const phdrp =				      \
+		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
+	int i;								      \
+	Elf32_Off ofs = 0;						      \
+	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
+		struct elf_phdr phdr = phdrp[i];			      \
+		if (phdr.p_type == PT_LOAD) {				      \
+			ofs = phdr.p_offset = offset;			      \
+			offset += phdr.p_filesz;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;				      \
+		phdr.p_paddr = 0; /* match other core phdrs */		      \
+		DUMP_WRITE(&phdr, sizeof(phdr));			      \
+	}								      \
+}
+#define ELF_CORE_WRITE_EXTRA_DATA					      \
+if ( vsyscall_ehdr ) {							      \
+	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
+	const struct elf_phdr *const phdrp =				      \
+		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
+	int i;								      \
+	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
+		if (phdrp[i].p_type == PT_LOAD)				      \
+			DUMP_WRITE((void *) phdrp[i].p_vaddr,		      \
+				   phdrp[i].p_filesz);			      \
+	}								      \
+}
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+/********* Nothing for asm-um/hardirq.h **********/
+
+/********* Nothing for asm-um/hw_irq.h **********/
+
+/********* Nothing for asm-um/string.h **********/
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/archparam-ppc.h b/include/asm-um/archparam-ppc.h
new file mode 100644
index 000000000000..0ebced92a762
--- /dev/null
+++ b/include/asm-um/archparam-ppc.h
@@ -0,0 +1,37 @@
+#ifndef __UM_ARCHPARAM_PPC_H
+#define __UM_ARCHPARAM_PPC_H
+
+/********* Bits for asm-um/elf.h ************/
+
+#define ELF_PLATFORM (0)
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+/* the following stolen from asm-ppc/elf.h */
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#define ELF_DATA        ELFDATA2MSB
+#define ELF_ARCH	EM_PPC
+
+/********* Bits for asm-um/hw_irq.h **********/
+
+struct hw_interrupt_type;
+
+/********* Bits for asm-um/hardirq.h **********/
+
+#define irq_enter(cpu, irq) hardirq_enter(cpu)
+#define irq_exit(cpu, irq) hardirq_exit(cpu)
+
+/********* Bits for asm-um/string.h **********/
+
+#define __HAVE_ARCH_STRRCHR
+
+#endif
diff --git a/include/asm-um/archparam-x86_64.h b/include/asm-um/archparam-x86_64.h
new file mode 100644
index 000000000000..96321c4892f1
--- /dev/null
+++ b/include/asm-um/archparam-x86_64.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_X86_64_H
+#define __UM_ARCHPARAM_X86_64_H
+
+#include <asm/user.h>
+
+#define ELF_PLATFORM "x86_64"
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+typedef unsigned long elf_greg_t;
+typedef struct { } elf_fpregset_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_X86_64
+
+#define ELF_PLAT_INIT(regs, load_addr)    do { \
+	PT_REGS_RBX(regs) = 0; \
+	PT_REGS_RCX(regs) = 0; \
+	PT_REGS_RDX(regs) = 0; \
+	PT_REGS_RSI(regs) = 0; \
+	PT_REGS_RDI(regs) = 0; \
+	PT_REGS_RBP(regs) = 0; \
+	PT_REGS_RAX(regs) = 0; \
+	PT_REGS_R8(regs) = 0; \
+	PT_REGS_R9(regs) = 0; \
+	PT_REGS_R10(regs) = 0; \
+	PT_REGS_R11(regs) = 0; \
+	PT_REGS_R12(regs) = 0; \
+	PT_REGS_R13(regs) = 0; \
+	PT_REGS_R14(regs) = 0; \
+	PT_REGS_R15(regs) = 0; \
+} while (0)
+
+#ifdef TIF_IA32 /* XXX */
+        clear_thread_flag(TIF_IA32);
+#endif
+
+/* No user-accessible fixmap addresses, i.e. vsyscall */
+#define FIXADDR_USER_START	0
+#define FIXADDR_USER_END	0
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/atomic.h b/include/asm-um/atomic.h
new file mode 100644
index 000000000000..b683f1034d1e
--- /dev/null
+++ b/include/asm-um/atomic.h
@@ -0,0 +1,11 @@
+#ifndef __UM_ATOMIC_H
+#define __UM_ATOMIC_H
+
+/* The i386 atomic.h calls printk, but doesn't include kernel.h, so we
+ * include it here.
+ */
+#include "linux/kernel.h"
+
+#include "asm/arch/atomic.h"
+
+#endif
diff --git a/include/asm-um/bitops.h b/include/asm-um/bitops.h
new file mode 100644
index 000000000000..46d781953d3a
--- /dev/null
+++ b/include/asm-um/bitops.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BITOPS_H
+#define __UM_BITOPS_H
+
+#include "asm/arch/bitops.h"
+
+#endif
diff --git a/include/asm-um/boot.h b/include/asm-um/boot.h
new file mode 100644
index 000000000000..09548c3e784e
--- /dev/null
+++ b/include/asm-um/boot.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BOOT_H
+#define __UM_BOOT_H
+
+#include "asm/arch/boot.h"
+
+#endif
diff --git a/include/asm-um/bug.h b/include/asm-um/bug.h
new file mode 100644
index 000000000000..1e22fa26ff06
--- /dev/null
+++ b/include/asm-um/bug.h
@@ -0,0 +1,4 @@
+#ifndef __UM_BUG_H
+#define __UM_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-um/bugs.h b/include/asm-um/bugs.h
new file mode 100644
index 000000000000..6a72e240d5fc
--- /dev/null
+++ b/include/asm-um/bugs.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BUGS_H
+#define __UM_BUGS_H
+
+void check_bugs(void);
+
+#endif
diff --git a/include/asm-um/byteorder.h b/include/asm-um/byteorder.h
new file mode 100644
index 000000000000..eee0a834f447
--- /dev/null
+++ b/include/asm-um/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BYTEORDER_H
+#define __UM_BYTEORDER_H
+
+#include "asm/arch/byteorder.h"
+
+#endif
diff --git a/include/asm-um/cache.h b/include/asm-um/cache.h
new file mode 100644
index 000000000000..4b134fe8504e
--- /dev/null
+++ b/include/asm-um/cache.h
@@ -0,0 +1,10 @@
+#ifndef __UM_CACHE_H
+#define __UM_CACHE_H
+
+/* These are x86 numbers */
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#endif
diff --git a/include/asm-um/cacheflush.h b/include/asm-um/cacheflush.h
new file mode 100644
index 000000000000..12e9d4b74c8f
--- /dev/null
+++ b/include/asm-um/cacheflush.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CACHEFLUSH_H
+#define __UM_CACHEFLUSH_H
+
+#include "asm/arch/cacheflush.h"
+
+#endif
diff --git a/include/asm-um/calling.h b/include/asm-um/calling.h
new file mode 100644
index 000000000000..0b2384cc99fd
--- /dev/null
+++ b/include/asm-um/calling.h
@@ -0,0 +1,9 @@
+# Copyright 2003 - 2004 Pathscale, Inc
+# Released under the GPL
+
+#ifndef __UM_CALLING_H /* XXX x86_64 */
+#define __UM_CALLING_H
+
+#include "asm/arch/calling.h"
+
+#endif
diff --git a/include/asm-um/checksum.h b/include/asm-um/checksum.h
new file mode 100644
index 000000000000..5b501361e361
--- /dev/null
+++ b/include/asm-um/checksum.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CHECKSUM_H
+#define __UM_CHECKSUM_H
+
+#include "sysdep/checksum.h"
+
+#endif
diff --git a/include/asm-um/cobalt.h b/include/asm-um/cobalt.h
new file mode 100644
index 000000000000..f813a684be98
--- /dev/null
+++ b/include/asm-um/cobalt.h
@@ -0,0 +1,6 @@
+#ifndef __UM_COBALT_H
+#define __UM_COBALT_H
+
+#include "asm/arch/cobalt.h"
+
+#endif
diff --git a/include/asm-um/common.lds.S b/include/asm-um/common.lds.S
new file mode 100644
index 000000000000..a3d6aab0e74d
--- /dev/null
+++ b/include/asm-um/common.lds.S
@@ -0,0 +1,104 @@
+#include <asm-generic/vmlinux.lds.h>
+
+  .fini      : { *(.fini)    } =0x9090
+  _etext = .;
+  PROVIDE (etext = .);
+
+  . = ALIGN(4096);
+  _sdata = .;
+  PROVIDE (sdata = .);
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  RODATA
+
+  .unprotected : { *(.unprotected) }
+  . = ALIGN(4096);
+  PROVIDE (_unprotected_end = .);
+
+  . = ALIGN(4096);
+  __uml_setup_start = .;
+  .uml.setup.init : { *(.uml.setup.init) }
+  __uml_setup_end = .;
+	
+  __uml_help_start = .;
+  .uml.help.init : { *(.uml.help.init) }
+  __uml_help_end = .;
+	
+  __uml_postsetup_start = .;
+  .uml.postsetup.init : { *(.uml.postsetup.init) }
+  __uml_postsetup_end = .;
+	
+  __setup_start = .;
+  .init.setup : { *(.init.setup) }
+  __setup_end = .;
+
+  . = ALIGN(32);
+  __per_cpu_start = . ; 
+  .data.percpu : { *(.data.percpu) }
+  __per_cpu_end = . ;
+	
+  __initcall_start = .;
+  .initcall.init : {
+	*(.initcall1.init) 
+	*(.initcall2.init) 
+	*(.initcall3.init) 
+	*(.initcall4.init) 
+	*(.initcall5.init) 
+	*(.initcall6.init) 
+	*(.initcall7.init)
+  }
+  __initcall_end = .;
+
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+
+  __uml_initcall_start = .;
+  .uml.initcall.init : { *(.uml.initcall.init) }
+  __uml_initcall_end = .;
+  __init_end = .;
+
+  SECURITY_INIT
+
+  __exitcall_begin = .;
+  .exitcall : { *(.exitcall.exit) }
+  __exitcall_end = .;
+
+  __uml_exitcall_begin = .;
+  .uml.exitcall : { *(.uml.exitcall.exit) }
+  __uml_exitcall_end = .;
+
+  . = ALIGN(4);
+  __alt_instructions = .;
+  .altinstructions : { *(.altinstructions) }
+  __alt_instructions_end = .;
+  .altinstr_replacement : { *(.altinstr_replacement) }
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : { *(.exit.text) }
+  .exit.data : { *(.exit.data) }
+
+  __preinit_array_start = .;
+  .preinit_array : { *(.preinit_array) }
+  __preinit_array_end = .;
+  __init_array_start = .;
+  .init_array : { *(.init_array) }
+  __init_array_end = .;
+  __fini_array_start = .;
+  .fini_array : { *(.fini_array) }
+  __fini_array_end = .;
+
+   . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+ 	*(.exitcall.exit)
+  }
+
diff --git a/include/asm-um/cpufeature.h b/include/asm-um/cpufeature.h
new file mode 100644
index 000000000000..fb7bd42a4d96
--- /dev/null
+++ b/include/asm-um/cpufeature.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CPUFEATURE_H
+#define __UM_CPUFEATURE_H
+
+#include "asm/arch/cpufeature.h"
+
+#endif
diff --git a/include/asm-um/cputime.h b/include/asm-um/cputime.h
new file mode 100644
index 000000000000..c84acbadfa2f
--- /dev/null
+++ b/include/asm-um/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CPUTIME_H
+#define __UM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __UM_CPUTIME_H */
diff --git a/include/asm-um/current.h b/include/asm-um/current.h
new file mode 100644
index 000000000000..8fd72f69ce65
--- /dev/null
+++ b/include/asm-um/current.h
@@ -0,0 +1,32 @@
+/* 
+ * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_CURRENT_H
+#define __UM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+#include "asm/page.h"
+#include "linux/thread_info.h"
+
+#define current (current_thread_info()->task)
+
+/*Backward compatibility - it's used inside arch/um.*/
+#define current_thread current_thread_info()
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/delay.h b/include/asm-um/delay.h
new file mode 100644
index 000000000000..40695576ca60
--- /dev/null
+++ b/include/asm-um/delay.h
@@ -0,0 +1,7 @@
+#ifndef __UM_DELAY_H
+#define __UM_DELAY_H
+
+#include "asm/arch/delay.h"
+#include "asm/archparam.h"
+
+#endif
diff --git a/include/asm-um/desc.h b/include/asm-um/desc.h
new file mode 100644
index 000000000000..ac1d2a20d178
--- /dev/null
+++ b/include/asm-um/desc.h
@@ -0,0 +1,6 @@
+#ifndef __UM_DESC_H
+#define __UM_DESC_H
+
+#include "asm/arch/desc.h"
+
+#endif
diff --git a/include/asm-um/div64.h b/include/asm-um/div64.h
new file mode 100644
index 000000000000..1e17f7409cab
--- /dev/null
+++ b/include/asm-um/div64.h
@@ -0,0 +1,6 @@
+#ifndef _UM_DIV64_H
+#define _UM_DIV64_H
+
+#include "asm/arch/div64.h"
+
+#endif
diff --git a/include/asm-um/dma-mapping.h b/include/asm-um/dma-mapping.h
new file mode 100644
index 000000000000..13e6291f7151
--- /dev/null
+++ b/include/asm-um/dma-mapping.h
@@ -0,0 +1,121 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG();
+	return(0);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG();
+	return(0);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   int flag)
+{
+	BUG();
+	return((void *) 0);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+	    enum dma_data_direction direction)
+{
+	BUG();
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d) (1)
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_cache_sync(void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+#endif
diff --git a/include/asm-um/dma.h b/include/asm-um/dma.h
new file mode 100644
index 000000000000..9f6139a8a525
--- /dev/null
+++ b/include/asm-um/dma.h
@@ -0,0 +1,10 @@
+#ifndef __UM_DMA_H
+#define __UM_DMA_H
+
+#include "asm/io.h"
+
+extern unsigned long uml_physmem;
+
+#define MAX_DMA_ADDRESS (uml_physmem)
+
+#endif
diff --git a/include/asm-um/dwarf2.h b/include/asm-um/dwarf2.h
new file mode 100644
index 000000000000..d1a02e762931
--- /dev/null
+++ b/include/asm-um/dwarf2.h
@@ -0,0 +1,11 @@
+/* Copyright 2003 - 2004 Pathscale, Inc
+ * Released under the GPL
+ */
+
+/* Needed on x86_64 by thunk.S */
+#ifndef __UM_DWARF2_H
+#define __UM_DWARF2_H
+
+#include "asm/arch/dwarf2.h"
+
+#endif
diff --git a/include/asm-um/elf.h b/include/asm-um/elf.h
new file mode 100644
index 000000000000..b3a7258f9971
--- /dev/null
+++ b/include/asm-um/elf.h
@@ -0,0 +1,37 @@
+#ifndef __UM_ELF_H
+#define __UM_ELF_H
+
+#include "linux/config.h"
+#include "asm/archparam.h"
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+#define SET_PERSONALITY(ex, ibcs2) do ; while(0)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+#define elf_check_arch(x) (1)
+
+#ifdef CONFIG_64_BIT
+#define ELF_CLASS ELFCLASS64
+#else
+#define ELF_CLASS ELFCLASS32
+#endif
+
+#define USE_ELF_CORE_DUMP
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+#endif
diff --git a/include/asm-um/errno.h b/include/asm-um/errno.h
new file mode 100644
index 000000000000..b7a9e37fd8d8
--- /dev/null
+++ b/include/asm-um/errno.h
@@ -0,0 +1,6 @@
+#ifndef __UM_ERRNO_H
+#define __UM_ERRNO_H
+
+#include "asm/arch/errno.h"
+
+#endif
diff --git a/include/asm-um/fcntl.h b/include/asm-um/fcntl.h
new file mode 100644
index 000000000000..812a65446d92
--- /dev/null
+++ b/include/asm-um/fcntl.h
@@ -0,0 +1,6 @@
+#ifndef __UM_FCNTL_H
+#define __UM_FCNTL_H
+
+#include "asm/arch/fcntl.h"
+
+#endif
diff --git a/include/asm-um/fixmap.h b/include/asm-um/fixmap.h
new file mode 100644
index 000000000000..900f3fbb9fab
--- /dev/null
+++ b/include/asm-um/fixmap.h
@@ -0,0 +1,97 @@
+#ifndef __UM_FIXMAP_H
+#define __UM_FIXMAP_H
+
+#include <linux/config.h>
+#include <asm/kmap_types.h>
+#include <asm/archparam.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+			  unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+extern unsigned long get_kmem_end(void);
+
+#define FIXADDR_TOP	(get_kmem_end() - 0x2000)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)      ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+      BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+      return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-um/floppy.h b/include/asm-um/floppy.h
new file mode 100644
index 000000000000..453e7415fb6f
--- /dev/null
+++ b/include/asm-um/floppy.h
@@ -0,0 +1,6 @@
+#ifndef __UM_FLOPPY_H
+#define __UM_FLOPPY_H
+
+#include "asm/arch/floppy.h"
+
+#endif
diff --git a/include/asm-um/hardirq.h b/include/asm-um/hardirq.h
new file mode 100644
index 000000000000..1224b2690a23
--- /dev/null
+++ b/include/asm-um/hardirq.h
@@ -0,0 +1,26 @@
+/* (c) 2004 cw@f00f.org, GPLv2 blah blah */
+
+#ifndef __ASM_UM_HARDIRQ_H
+#define __ASM_UM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* NOTE: When SMP works again we might want to make this
+ * ____cacheline_aligned or maybe use per_cpu state? --cw */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>
+
+/* As this would be very strange for UML to get we BUG() after the
+ * printk. */
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_ERR "unexpected IRQ %02x\n", irq);
+	BUG();
+}
+
+#endif /* __ASM_UM_HARDIRQ_H */
diff --git a/include/asm-um/hdreg.h b/include/asm-um/hdreg.h
new file mode 100644
index 000000000000..cf6363abcab9
--- /dev/null
+++ b/include/asm-um/hdreg.h
@@ -0,0 +1,6 @@
+#ifndef __UM_HDREG_H
+#define __UM_HDREG_H
+
+#include "asm/arch/hdreg.h"
+
+#endif
diff --git a/include/asm-um/highmem.h b/include/asm-um/highmem.h
new file mode 100644
index 000000000000..36974cb8abc7
--- /dev/null
+++ b/include/asm-um/highmem.h
@@ -0,0 +1,12 @@
+#ifndef __UM_HIGHMEM_H
+#define __UM_HIGHMEM_H
+
+#include "asm/page.h"
+#include "asm/fixmap.h"
+#include "asm/arch/highmem.h"
+
+#undef PKMAP_BASE
+
+#define PKMAP_BASE ((FIXADDR_START - LAST_PKMAP * PAGE_SIZE) & PMD_MASK)
+
+#endif
diff --git a/include/asm-um/hw_irq.h b/include/asm-um/hw_irq.h
new file mode 100644
index 000000000000..4ee38c0b6a64
--- /dev/null
+++ b/include/asm-um/hw_irq.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_UM_HW_IRQ_H
+#define _ASM_UM_HW_IRQ_H
+
+#include "asm/irq.h"
+#include "asm/archparam.h"
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{}
+
+#endif
diff --git a/include/asm-um/ide.h b/include/asm-um/ide.h
new file mode 100644
index 000000000000..3d1ccebcfbaf
--- /dev/null
+++ b/include/asm-um/ide.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IDE_H
+#define __UM_IDE_H
+
+#include "asm/arch/ide.h"
+
+#endif
diff --git a/include/asm-um/io.h b/include/asm-um/io.h
new file mode 100644
index 000000000000..90674056dcef
--- /dev/null
+++ b/include/asm-um/io.h
@@ -0,0 +1,36 @@
+#ifndef __UM_IO_H
+#define __UM_IO_H
+
+#include "asm/page.h"
+
+#define IO_SPACE_LIMIT 0xdeadbeef /* Sure hope nothing uses this */
+
+static inline int inb(unsigned long i) { return(0); }
+static inline void outb(char c, unsigned long i) { }
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((void *) address);
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
diff --git a/include/asm-um/ioctl.h b/include/asm-um/ioctl.h
new file mode 100644
index 000000000000..cc22157346db
--- /dev/null
+++ b/include/asm-um/ioctl.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IOCTL_H
+#define __UM_IOCTL_H
+
+#include "asm/arch/ioctl.h"
+
+#endif
diff --git a/include/asm-um/ioctls.h b/include/asm-um/ioctls.h
new file mode 100644
index 000000000000..9a1a017de6a7
--- /dev/null
+++ b/include/asm-um/ioctls.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IOCTLS_H
+#define __UM_IOCTLS_H
+
+#include "asm/arch/ioctls.h"
+
+#endif
diff --git a/include/asm-um/ipc.h b/include/asm-um/ipc.h
new file mode 100644
index 000000000000..e2ddc47f3e52
--- /dev/null
+++ b/include/asm-um/ipc.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IPC_H
+#define __UM_IPC_H
+
+#include "asm/arch/ipc.h"
+
+#endif
diff --git a/include/asm-um/ipcbuf.h b/include/asm-um/ipcbuf.h
new file mode 100644
index 000000000000..bb2ad31dc434
--- /dev/null
+++ b/include/asm-um/ipcbuf.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IPCBUF_H
+#define __UM_IPCBUF_H
+
+#include "asm/arch/ipcbuf.h"
+
+#endif
diff --git a/include/asm-um/irq.h b/include/asm-um/irq.h
new file mode 100644
index 000000000000..de389a477cdd
--- /dev/null
+++ b/include/asm-um/irq.h
@@ -0,0 +1,22 @@
+#ifndef __UM_IRQ_H
+#define __UM_IRQ_H
+
+#define TIMER_IRQ		0
+#define UMN_IRQ			1
+#define CONSOLE_IRQ		2
+#define CONSOLE_WRITE_IRQ	3
+#define UBD_IRQ			4
+#define UM_ETH_IRQ		5
+#define SSL_IRQ			6
+#define SSL_WRITE_IRQ		7
+#define ACCEPT_IRQ		8
+#define MCONSOLE_IRQ		9
+#define WINCH_IRQ		10
+#define SIGIO_WRITE_IRQ 	11
+#define TELNETD_IRQ 		12
+#define XTERM_IRQ 		13
+
+#define LAST_IRQ XTERM_IRQ
+#define NR_IRQS (LAST_IRQ + 1)
+
+#endif
diff --git a/include/asm-um/irq_vectors.h b/include/asm-um/irq_vectors.h
new file mode 100644
index 000000000000..62ddba6fc733
--- /dev/null
+++ b/include/asm-um/irq_vectors.h
@@ -0,0 +1,20 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_IRQ_VECTORS_H
+#define __UM_IRQ_VECTORS_H
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/keyboard.h b/include/asm-um/keyboard.h
new file mode 100644
index 000000000000..ee2e2303d0e4
--- /dev/null
+++ b/include/asm-um/keyboard.h
@@ -0,0 +1,6 @@
+#ifndef __UM_KEYBOARD_H
+#define __UM_KEYBOARD_H
+
+#include "asm/arch/keyboard.h"
+
+#endif
diff --git a/include/asm-um/kmap_types.h b/include/asm-um/kmap_types.h
new file mode 100644
index 000000000000..0b22ad776e76
--- /dev/null
+++ b/include/asm-um/kmap_types.h
@@ -0,0 +1,11 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_KMAP_TYPES_H
+#define __UM_KMAP_TYPES_H
+
+#include "asm/arch/kmap_types.h"
+
+#endif
diff --git a/include/asm-um/linkage.h b/include/asm-um/linkage.h
new file mode 100644
index 000000000000..27011652b015
--- /dev/null
+++ b/include/asm-um/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define FASTCALL(x)	x __attribute__((regparm(3)))
+#define fastcall        __attribute__((regparm(3)))
+
+#endif
diff --git a/include/asm-um/local.h b/include/asm-um/local.h
new file mode 100644
index 000000000000..9a280c5bb609
--- /dev/null
+++ b/include/asm-um/local.h
@@ -0,0 +1,6 @@
+#ifndef __UM_LOCAL_H
+#define __UM_LOCAL_H
+
+#include "asm/arch/local.h"
+
+#endif
diff --git a/include/asm-um/locks.h b/include/asm-um/locks.h
new file mode 100644
index 000000000000..f80030a3ef5a
--- /dev/null
+++ b/include/asm-um/locks.h
@@ -0,0 +1,6 @@
+#ifndef __UM_LOCKS_H
+#define __UM_LOCKS_H
+
+#include "asm/arch/locks.h"
+
+#endif
diff --git a/include/asm-um/mca_dma.h b/include/asm-um/mca_dma.h
new file mode 100644
index 000000000000..e492e4ec1392
--- /dev/null
+++ b/include/asm-um/mca_dma.h
@@ -0,0 +1,6 @@
+#ifndef mca___UM_DMA_H
+#define mca___UM_DMA_H
+
+#include "asm/arch/mca_dma.h"
+
+#endif
diff --git a/include/asm-um/mman.h b/include/asm-um/mman.h
new file mode 100644
index 000000000000..b09ed523019b
--- /dev/null
+++ b/include/asm-um/mman.h
@@ -0,0 +1,6 @@
+#ifndef __UM_MMAN_H
+#define __UM_MMAN_H
+
+#include "asm/arch/mman.h"
+
+#endif
diff --git a/include/asm-um/mmu.h b/include/asm-um/mmu.h
new file mode 100644
index 000000000000..2cf35c21d694
--- /dev/null
+++ b/include/asm-um/mmu.h
@@ -0,0 +1,22 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __MMU_H
+#define __MMU_H
+
+#include "um_mmu.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h
new file mode 100644
index 000000000000..89bff310b7a9
--- /dev/null
+++ b/include/asm-um/mmu_context.h
@@ -0,0 +1,76 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_MMU_CONTEXT_H
+#define __UM_MMU_CONTEXT_H
+
+#include "linux/sched.h"
+#include "choose-mode.h"
+
+#define get_mmu_context(task) do ; while(0)
+#define activate_context(tsk) do ; while(0)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
+{
+}
+
+extern void switch_mm_skas(int mm_fd);
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if(prev != next){
+		cpu_clear(cpu, prev->cpu_vm_mask);
+		cpu_set(cpu, next->cpu_vm_mask);
+		if(next != &init_mm)
+			CHOOSE_MODE((void) 0, 
+				    switch_mm_skas(next->context.skas.mm_fd));
+	}
+}
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, 
+				  struct task_struct *tsk)
+{
+}
+
+extern int init_new_context_skas(struct task_struct *task, 
+				 struct mm_struct *mm);
+
+static inline int init_new_context_tt(struct task_struct *task, 
+				      struct mm_struct *mm)
+{
+	return(0);
+}
+
+static inline int init_new_context(struct task_struct *task, 
+				   struct mm_struct *mm)
+{
+	return(CHOOSE_MODE_PROC(init_new_context_tt, init_new_context_skas, 
+				task, mm));
+}
+
+extern void destroy_context_skas(struct mm_struct *mm);
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+	CHOOSE_MODE((void) 0, destroy_context_skas(mm));
+}
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/module-generic.h b/include/asm-um/module-generic.h
new file mode 100644
index 000000000000..5a265f56b174
--- /dev/null
+++ b/include/asm-um/module-generic.h
@@ -0,0 +1,6 @@
+#ifndef __UM_MODULE_GENERIC_H
+#define __UM_MODULE_GENERIC_H
+
+#include "asm/arch/module.h"
+
+#endif
diff --git a/include/asm-um/module-i386.h b/include/asm-um/module-i386.h
new file mode 100644
index 000000000000..5ead4a0b2e35
--- /dev/null
+++ b/include/asm-um/module-i386.h
@@ -0,0 +1,13 @@
+#ifndef __UM_MODULE_I386_H
+#define __UM_MODULE_I386_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif
diff --git a/include/asm-um/module-x86_64.h b/include/asm-um/module-x86_64.h
new file mode 100644
index 000000000000..35b5491d3e96
--- /dev/null
+++ b/include/asm-um/module-x86_64.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_MODULE_X86_64_H
+#define __UM_MODULE_X86_64_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/msgbuf.h b/include/asm-um/msgbuf.h
new file mode 100644
index 000000000000..8ce8c30d5377
--- /dev/null
+++ b/include/asm-um/msgbuf.h
@@ -0,0 +1,6 @@
+#ifndef __UM_MSGBUF_H
+#define __UM_MSGBUF_H
+
+#include "asm/arch/msgbuf.h"
+
+#endif
diff --git a/include/asm-um/mtrr.h b/include/asm-um/mtrr.h
new file mode 100644
index 000000000000..5e9cd12c578d
--- /dev/null
+++ b/include/asm-um/mtrr.h
@@ -0,0 +1,6 @@
+#ifndef __UM_MTRR_H
+#define __UM_MTRR_H
+
+#include "asm/arch/mtrr.h"
+
+#endif
diff --git a/include/asm-um/namei.h b/include/asm-um/namei.h
new file mode 100644
index 000000000000..002984d5bc85
--- /dev/null
+++ b/include/asm-um/namei.h
@@ -0,0 +1,6 @@
+#ifndef __UM_NAMEI_H
+#define __UM_NAMEI_H
+
+#include "asm/arch/namei.h"
+
+#endif
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
new file mode 100644
index 000000000000..3620a08dc9f3
--- /dev/null
+++ b/include/asm-um/page.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PAGE_H
+#define __UM_PAGE_H
+
+struct page;
+
+#include <linux/config.h>
+#include <asm/vm-flags.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64_BIT)
+
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32))
+
+#define pte_get_bits(pte, bits) ((pte).pte_low & (bits))
+#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits))
+#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits))
+#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \
+			      smp_wmb(); \
+			      (to).pte_low = (from).pte_low; })
+#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high)
+#define pte_set_val(pte, phys, prot) \
+	({ (pte).pte_high = (phys) >> 32; \
+	   (pte).pte_low = (phys) | pgprot_val(prot); })
+
+typedef unsigned long long pfn_t;
+typedef unsigned long long phys_t;
+
+#else
+
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+#endif
+
+#define pte_val(x)	((x).pte)
+
+
+#define pte_get_bits(p, bits) ((p).pte & (bits))
+#define pte_set_bits(p, bits) ((p).pte |= (bits))
+#define pte_clear_bits(p, bits) ((p).pte &= ~(bits))
+#define pte_copy(to, from) ((to).pte = (from).pte)
+#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
+#define pte_set_val(p, phys, prot) (p).pte = (phys | pgprot_val(prot))
+
+typedef unsigned long pfn_t;
+typedef unsigned long phys_t;
+
+#endif
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+extern unsigned long uml_physmem;
+
+#define PAGE_OFFSET (uml_physmem)
+#define KERNELBASE PAGE_OFFSET
+
+#define __va_space (8*1024*1024)
+
+extern unsigned long to_phys(void *virt);
+extern void *to_virt(unsigned long phys);
+#define __pa(virt) to_phys((void *) virt)
+#define __va(phys) to_virt((unsigned long) phys)
+
+#define page_to_pfn(page) ((page) - mem_map)
+#define pfn_to_page(pfn) (mem_map + (pfn))
+
+#define phys_to_pfn(p) ((p) >> PAGE_SHIFT)
+#define pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
+
+/* Pure 2^n version of get_order */
+static __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+extern struct page *arch_validate(struct page *page, int mask, int order);
+#define HAVE_ARCH_VALIDATE
+
+extern void arch_free_page(struct page *page, int order);
+#define HAVE_ARCH_FREE_PAGE
+
+#endif
diff --git a/include/asm-um/page_offset.h b/include/asm-um/page_offset.h
new file mode 100644
index 000000000000..1c168dfbf359
--- /dev/null
+++ b/include/asm-um/page_offset.h
@@ -0,0 +1 @@
+#define PAGE_OFFSET_RAW (uml_physmem)
diff --git a/include/asm-um/param.h b/include/asm-um/param.h
new file mode 100644
index 000000000000..f914e7d67b01
--- /dev/null
+++ b/include/asm-um/param.h
@@ -0,0 +1,18 @@
+#ifndef _UM_PARAM_H
+#define _UM_PARAM_H
+
+#define EXEC_PAGESIZE   4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#ifdef __KERNEL__
+#define HZ 100
+#define USER_HZ	100	   /* .. some user interfaces are in "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ)  /* frequency at which times() counts */
+#endif
+
+#endif
diff --git a/include/asm-um/pci.h b/include/asm-um/pci.h
new file mode 100644
index 000000000000..59923199cdc3
--- /dev/null
+++ b/include/asm-um/pci.h
@@ -0,0 +1,7 @@
+#ifndef __UM_PCI_H
+#define __UM_PCI_H
+
+#define PCI_DMA_BUS_IS_PHYS     (1)
+#define pcibios_scan_all_fns(a, b)	0
+
+#endif
diff --git a/include/asm-um/pda.h b/include/asm-um/pda.h
new file mode 100644
index 000000000000..0d8bf33ffd42
--- /dev/null
+++ b/include/asm-um/pda.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PDA_X86_64_H
+#define __UM_PDA_X86_64_H
+
+/* XXX */
+struct foo {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;
+};
+
+extern struct foo me;
+
+#define read_pda(me) (&me)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/percpu.h b/include/asm-um/percpu.h
new file mode 100644
index 000000000000..5723e2aab8e7
--- /dev/null
+++ b/include/asm-um/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __UM_PERCPU_H
+#define __UM_PERCPU_H
+
+#include "asm/arch/percpu.h"
+
+#endif
diff --git a/include/asm-um/pgalloc.h b/include/asm-um/pgalloc.h
new file mode 100644
index 000000000000..8fcb2fc0a892
--- /dev/null
+++ b/include/asm-um/pgalloc.h
@@ -0,0 +1,65 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgalloc.h and include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGALLOC_H
+#define __UM_PGALLOC_H
+
+#include "linux/config.h"
+#include "linux/mm.h"
+#include "asm/fixmap.h"
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+	set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) __pa(pte)))
+
+#define pmd_populate(mm, pmd, pte) 				\
+	set_pmd(pmd, __pmd(_PAGE_TABLE +			\
+		((unsigned long long)page_to_pfn(pte) <<	\
+			(unsigned long long) PAGE_SHIFT)))
+
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+/*
+ * In the 3-level case we free the pmds as part of the pgd.
+ */
+#define pmd_free(x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/pgtable-2level.h b/include/asm-um/pgtable-2level.h
new file mode 100644
index 000000000000..61eb24734247
--- /dev/null
+++ b/include/asm-um/pgtable-2level.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_2LEVEL_H
+#define __UM_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
+#define PGDIR_SHIFT	22
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the i386 is two-level, so
+ * we don't really have any PMD directory physically.
+ */
+#define PTRS_PER_PTE	1024
+#define USER_PTRS_PER_PGD ((TASK_SIZE + (PGDIR_SIZE - 1)) / PGDIR_SIZE)
+#define PTRS_PER_PGD	1024
+#define FIRST_USER_PGD_NR       0
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), \
+	       pte_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), \
+	       pgd_val(e))
+
+static inline int pgd_newpage(pgd_t pgd)	{ return 0; }
+static inline void pgd_mkuptodate(pgd_t pgd)	{ }
+
+#define pte_present(x)	(pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+static inline pte_t pte_mknewprot(pte_t pte)
+{
+ 	pte_val(pte) |= _PAGE_NEWPROT;
+	return(pte);
+}
+
+static inline pte_t pte_mknewpage(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_NEWPAGE;
+	return(pte);
+}
+
+static inline void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	/* If it's a swap entry, it needs to be marked _PAGE_NEWPAGE so
+	 * fix_range knows to unmap it.  _PAGE_NEWPROT is specific to
+	 * mapped pages.
+	 */
+	*pteptr = pte_mknewpage(pteval);
+	if(pte_present(*pteptr)) *pteptr = pte_mknewprot(*pteptr);
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_none(x) !(pte_val(x) & ~_PAGE_NEWPAGE)
+#define pte_pfn(x) phys_to_pfn(pte_val(x))
+#define pfn_pte(pfn, prot) __pte(pfn_to_phys(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(pfn_to_phys(pfn) | pgprot_val(prot))
+
+#define pmd_page_kernel(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/*
+ * Bits 0 through 3 are taken
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> 4)
+
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 4) + _PAGE_FILE })
+
+#endif
diff --git a/include/asm-um/pgtable-3level.h b/include/asm-um/pgtable-3level.h
new file mode 100644
index 000000000000..faf051c2c418
--- /dev/null
+++ b/include/asm-um/pgtable-3level.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2003 PathScale Inc
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_3LEVEL_H
+#define __UM_PGTABLE_3LEVEL_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
+#define PGDIR_SHIFT	30
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* PMD_SHIFT determines the size of the area a second-level page table can
+ * map
+ */
+
+#define PMD_SHIFT	21
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/*
+ * entries per page directory level
+ */
+
+#define PTRS_PER_PTE 512
+#define PTRS_PER_PMD 512
+#define USER_PTRS_PER_PGD ((TASK_SIZE + (PGDIR_SIZE - 1)) / PGDIR_SIZE)
+#define PTRS_PER_PGD 512
+#define FIRST_USER_PGD_NR       0
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pte_val(e))
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pmd_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pgd_val(e))
+
+#define pud_none(x)	(!(pud_val(x) & ~_PAGE_NEWPAGE))
+#define	pud_bad(x)	((pud_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pud_present(x)	(pud_val(x) & _PAGE_PRESENT)
+#define pud_populate(mm, pud, pmd) \
+	set_pud(pud, __pud(_PAGE_TABLE + __pa(pmd)))
+
+#define set_pud(pudptr, pudval) set_64bit((phys_t *) (pudptr), pud_val(pudval))
+static inline int pgd_newpage(pgd_t pgd)
+{
+	return(pgd_val(pgd) & _PAGE_NEWPAGE);
+}
+
+static inline void pgd_mkuptodate(pgd_t pgd) { pgd_val(pgd) &= ~_PAGE_NEWPAGE; }
+
+
+#define pte_present(x)	pte_get_bits(x, (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+static inline pte_t pte_mknewprot(pte_t pte)
+{
+        pte_set_bits(pte, _PAGE_NEWPROT);
+	return(pte);
+}
+
+static inline pte_t pte_mknewpage(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_NEWPAGE);
+	return(pte);
+}
+
+static inline void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	pte_copy(*pteptr, pteval);
+
+	/* If it's a swap entry, it needs to be marked _PAGE_NEWPAGE so
+	 * fix_range knows to unmap it.  _PAGE_NEWPROT is specific to
+	 * mapped pages.
+	 */
+
+	*pteptr = pte_mknewpage(*pteptr);
+	if(pte_present(*pteptr)) *pteptr = pte_mknewprot(*pteptr);
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define set_pmd(pmdptr, pmdval) set_64bit((phys_t *) (pmdptr), pmd_val(pmdval))
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+        pmd_t *pmd = (pmd_t *) __get_free_page(GFP_KERNEL);
+
+        if(pmd)
+                memset(pmd, 0, PAGE_SIZE);
+
+        return pmd;
+}
+
+static inline void pmd_free(pmd_t *pmd){
+	free_page((unsigned long) pmd);
+}
+
+#define __pmd_free_tlb(tlb,x)   do { } while (0)
+
+static inline void pud_clear (pud_t * pud) { }
+
+#define pud_page(pud) \
+	((struct page *) __va(pud_val(pud) & PAGE_MASK))
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
+			pmd_index(address))
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline int pte_none(pte_t pte)
+{
+	return pte_is_zero(pte);
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return phys_to_pfn(pte_val(pte));
+}
+
+static inline pte_t pfn_pte(pfn_t page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+	phys_t phys = pfn_to_phys(page_nr);
+
+	pte_set_val(pte, phys, pgprot);
+	return pte;
+}
+
+static inline pmd_t pfn_pmd(pfn_t page_nr, pgprot_t pgprot)
+{
+	return __pmd((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
+}
+
+/*
+ * Bits 0 through 3 are taken in the low part of the pte,
+ * put the 32 bits of offset into the high part.
+ */
+#define PTE_FILE_MAX_BITS	32
+
+#ifdef CONFIG_64_BIT
+
+#define pte_to_pgoff(p) ((p).pte >> 32)
+
+#define pgoff_to_pte(off) ((pte_t) { ((off) < 32) | _PAGE_FILE })
+
+#else
+
+#define pte_to_pgoff(pte) ((pte).pte_high)
+
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
+
+#endif
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
new file mode 100644
index 000000000000..71f9c0c78c0c
--- /dev/null
+++ b/include/asm-um/pgtable.h
@@ -0,0 +1,386 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_H
+#define __UM_PGTABLE_H
+
+#include "linux/sched.h"
+#include "linux/linkage.h"
+#include "asm/processor.h"
+#include "asm/page.h"
+#include "asm/fixmap.h"
+
+#define _PAGE_PRESENT	0x001
+#define _PAGE_NEWPAGE	0x002
+#define _PAGE_NEWPROT   0x004
+#define _PAGE_FILE	0x008   /* set:pagecache unset:swap */
+#define _PAGE_PROTNONE	0x010	/* If not present */
+#define _PAGE_RW	0x020
+#define _PAGE_USER	0x040
+#define _PAGE_ACCESSED	0x080
+#define _PAGE_DIRTY	0x100
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+#include "asm/pgtable-3level.h"
+#else
+#include "asm/pgtable-2level.h"
+#endif
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+extern void *um_virt_to_phys(struct task_struct *task, unsigned long virt,
+			     pte_t *pte_out);
+
+/* zero page used for uninitialized stuff */
+extern unsigned long *empty_zero_page;
+
+#define pgtable_cache_init() do ; while (0)
+
+/*
+ * pgd entries used up by user/kernel:
+ */
+
+#define USER_PGD_PTRS (TASK_SIZE >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+
+extern unsigned long end_iomem;
+
+#define VMALLOC_OFFSET	(__va_space)
+#define VMALLOC_START ((end_iomem + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#define REGION_SHIFT	(sizeof(pte_t) * 8 - 4)
+#define REGION_MASK	(((unsigned long) 0xf) << REGION_SHIFT)
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+/*
+ * The i386 can't do page protection for execute, and considers that the same are read.
+ * Also, write permissions imply read permissions. This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * Define this if things work differently on an i386 and an i486:
+ * it will (on an i486) warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+/* page table for 0-4MB for everybody */
+extern unsigned long pg0[1024];
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t __bad_page(void);
+extern pte_t * __bad_pagetable(void);
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+
+#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware!  SRB. */
+#define SIZEOF_PTR_LOG2			3
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address) \
+((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+#define pte_clear(mm,addr,xp) pte_set_val(*(xp), (phys_t) 0, __pgprot(_PAGE_NEWPAGE))
+
+#define pmd_none(x)	(!(pmd_val(x) & ~_PAGE_NEWPAGE))
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { pmd_val(*(xp)) = _PAGE_NEWPAGE; } while (0)
+
+#define pmd_newpage(x)  (pmd_val(x) & _PAGE_NEWPAGE)
+#define pmd_mkuptodate(x) (pmd_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pud_newpage(x)  (pud_val(x) & _PAGE_NEWPAGE)
+#define pud_mkuptodate(x) (pud_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+#define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK)
+
+#define pte_address(x) (__va(pte_val(x) & PAGE_MASK))
+#define mk_phys(a, r) ((a) + (((unsigned long) r) << REGION_SHIFT))
+#define phys_addr(p) ((p) & ~REGION_MASK)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)
+{
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_read(pte_t pte)
+{ 
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_exec(pte_t pte){
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return((pte_get_bits(pte, _PAGE_RW)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_FILE);
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_DIRTY);
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_ACCESSED);
+}
+
+static inline int pte_newpage(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_NEWPAGE);
+}
+
+static inline int pte_newprot(pte_t pte)
+{ 
+	return(pte_present(pte) && (pte_get_bits(pte, _PAGE_NEWPROT)));
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{ 
+	pte_clear_bits(pte, _PAGE_USER);
+	return(pte_mknewprot(pte));
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{ 
+	pte_clear_bits(pte, _PAGE_USER);
+	return(pte_mknewprot(pte));
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_clear_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkold(pte_t pte)	
+{ 
+	pte_clear_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{ 
+	pte_clear_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_USER);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)	
+{
+	pte_set_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkuptodate(pte_t pte)	
+{
+	pte_clear_bits(pte, _PAGE_NEWPAGE);
+	if(pte_present(pte))
+		pte_clear_bits(pte, _PAGE_NEWPROT);
+	return(pte); 
+}
+
+extern phys_t page_to_phys(struct page *page);
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+extern pte_t mk_pte(struct page *page, pgprot_t pgprot);
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_set_val(pte, (pte_val(pte) & _PAGE_CHG_MASK), newprot);
+	if(pte_present(pte)) pte = pte_mknewpage(pte_mknewprot(pte));
+	return pte; 
+}
+
+#define pmd_page_kernel(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+#define pgd_index_k(addr) pgd_index(addr)
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+#define update_mmu_cache(vma,address,pte) do ; while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 4) & 0x3f)
+#define __swp_offset(x)			((x).val >> 11)
+
+#define __swp_entry(type, offset) \
+	((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+#define __pte_to_swp_entry(pte) \
+	((swp_entry_t) { pte_val(pte_mkuptodate(pte)) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+#include <asm-generic/pgtable-nopud.h>
+
+#endif
+#endif
+
+extern struct page *phys_to_page(const unsigned long phys);
+extern struct page *__virt_to_page(const unsigned long virt);
+#define virt_to_page(addr) __virt_to_page((const unsigned long) addr)
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/poll.h b/include/asm-um/poll.h
new file mode 100644
index 000000000000..1eb4e1bc6383
--- /dev/null
+++ b/include/asm-um/poll.h
@@ -0,0 +1,6 @@
+#ifndef __UM_POLL_H
+#define __UM_POLL_H
+
+#include "asm/arch/poll.h"
+
+#endif
diff --git a/include/asm-um/posix_types.h b/include/asm-um/posix_types.h
new file mode 100644
index 000000000000..32fb4198f644
--- /dev/null
+++ b/include/asm-um/posix_types.h
@@ -0,0 +1,6 @@
+#ifndef __UM_POSIX_TYPES_H
+#define __UM_POSIX_TYPES_H
+
+#include "asm/arch/posix_types.h"
+
+#endif
diff --git a/include/asm-um/prctl.h b/include/asm-um/prctl.h
new file mode 100644
index 000000000000..64b6d099bdd5
--- /dev/null
+++ b/include/asm-um/prctl.h
@@ -0,0 +1,6 @@
+#ifndef __UM_PRCTL_H
+#define __UM_PRCTL_H
+
+#include "asm/arch/prctl.h"
+
+#endif
diff --git a/include/asm-um/processor-generic.h b/include/asm-um/processor-generic.h
new file mode 100644
index 000000000000..038ba6fc88b8
--- /dev/null
+++ b/include/asm-um/processor-generic.h
@@ -0,0 +1,150 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_GENERIC_H
+#define __UM_PROCESSOR_GENERIC_H
+
+struct pt_regs;
+
+struct task_struct;
+
+#include "linux/config.h"
+#include "asm/ptrace.h"
+#include "choose-mode.h"
+
+struct mm_struct;
+
+struct thread_struct {
+	int forking;
+	int nsyscalls;
+	struct pt_regs regs;
+	unsigned long cr2;
+	int err;
+	unsigned long trap_no;
+	int singlestep_syscall;
+	void *fault_addr;
+	void *fault_catcher;
+	struct task_struct *prev_sched;
+	unsigned long temp_stack;
+	void *exec_buf;
+	struct arch_thread arch;
+	union {
+#ifdef CONFIG_MODE_TT
+		struct {
+			int extern_pid;
+			int tracing;
+			int switch_pipe[2];
+			int vm_seq;
+		} tt;
+#endif
+#ifdef CONFIG_MODE_SKAS
+		struct {
+			void *switch_buf;
+			void *fork_buf;
+			int mm_count;
+		} skas;
+#endif
+	} mode;
+	struct {
+		int op;
+		union {
+			struct {
+				int pid;
+			} fork, exec;
+			struct {
+				int (*proc)(void *);
+				void *arg;
+			} thread;
+			struct {
+				void (*proc)(void *);
+				void *arg;
+			} cb;
+		} u;
+	} request;
+};
+
+#define INIT_THREAD \
+{ \
+	.forking		= 0, \
+	.nsyscalls		= 0, \
+        .regs		   	= EMPTY_REGS, \
+	.cr2			= 0, \
+	.err			= 0, \
+	.fault_addr		= NULL, \
+	.prev_sched		= NULL, \
+	.temp_stack		= 0, \
+	.exec_buf		= NULL, \
+	.arch			= INIT_ARCH_THREAD, \
+	.request		= { 0 } \
+}
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+extern struct task_struct *alloc_task_struct(void);
+
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern void dump_thread(struct pt_regs *regs, struct user *u);
+extern void prepare_to_copy(struct task_struct *tsk);
+
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+static inline void mm_copy_segments(struct mm_struct *from_mm,
+				    struct mm_struct *new_mm)
+{
+}
+
+#define init_stack	(init_thread_union.stack)
+
+/*
+ * User space process size: 3GB (default).
+ */
+extern unsigned long task_size;
+
+#define TASK_SIZE	(task_size)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(0x40000000)
+
+extern void start_thread(struct pt_regs *regs, unsigned long entry, 
+			 unsigned long stack);
+
+struct cpuinfo_um {
+	unsigned long loops_per_jiffy;
+	int ipi_pipe[2];
+};
+
+extern struct cpuinfo_um boot_cpu_data;
+
+#define my_cpu_data		cpu_data[smp_processor_id()]
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_um cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+#define KSTK_EIP(tsk) (PT_REGS_IP(&tsk->thread.regs))
+#define KSTK_ESP(tsk) (PT_REGS_SP(&tsk->thread.regs))
+#define get_wchan(p) (0)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/processor-i386.h b/include/asm-um/processor-i386.h
new file mode 100644
index 000000000000..2deb8f1adbf1
--- /dev/null
+++ b/include/asm-um/processor-i386.h
@@ -0,0 +1,54 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_I386_H
+#define __UM_PROCESSOR_I386_H
+
+extern int host_has_xmm;
+extern int host_has_cmov;
+
+struct arch_thread {
+	unsigned long debugregs[8];
+	int debugregs_seq;
+};
+
+#define INIT_ARCH_THREAD { .debugregs  		= { [ 0 ... 7 ] = 0 }, \
+                           .debugregs_seq	= 0 }
+
+#include "asm/arch/user.h"
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()	rep_nop()
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter"). Stolen
+ * from asm-i386/processor.h
+ */
+#define current_text_addr() \
+	({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+       (address + 32 >= UPT_SP(&current->thread.regs.regs))
+
+#include "asm/processor-generic.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/processor-ppc.h b/include/asm-um/processor-ppc.h
new file mode 100644
index 000000000000..959323151229
--- /dev/null
+++ b/include/asm-um/processor-ppc.h
@@ -0,0 +1,15 @@
+#ifndef __UM_PROCESSOR_PPC_H
+#define __UM_PROCESSOR_PPC_H
+
+#if defined(__ASSEMBLY__)
+
+#define CONFIG_PPC_MULTIPLATFORM
+#include "arch/processor.h"
+
+#else
+
+#include "asm/processor-generic.h"
+
+#endif
+
+#endif
diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h
new file mode 100644
index 000000000000..a1ae3a4cd938
--- /dev/null
+++ b/include/asm-um/processor-x86_64.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_X86_64_H
+#define __UM_PROCESSOR_X86_64_H
+
+#include "asm/arch/user.h"
+
+struct arch_thread {
+};
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+extern inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()   rep_nop()
+
+#define INIT_ARCH_THREAD { }
+
+#define current_text_addr() \
+	({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+        (address + 128 >= UPT_SP(&current->thread.regs.regs))
+
+#include "asm/processor-generic.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
new file mode 100644
index 000000000000..46599ac44037
--- /dev/null
+++ b/include/asm-um/ptrace-generic.h
@@ -0,0 +1,76 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_GENERIC_H
+#define __UM_PTRACE_GENERIC_H
+
+#ifndef __ASSEMBLY__
+
+#include "linux/config.h"
+
+#define pt_regs pt_regs_subarch
+#define show_regs show_regs_subarch
+#define send_sigtrap send_sigtrap_subarch
+
+#include "asm/arch/ptrace.h"
+
+#undef pt_regs
+#undef show_regs
+#undef send_sigtrap
+#undef user_mode
+#undef instruction_pointer
+
+#include "sysdep/ptrace.h"
+
+struct pt_regs {
+	union uml_pt_regs regs;
+};
+
+#define EMPTY_REGS { regs : EMPTY_UML_PT_REGS }
+
+#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
+
+#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
+#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
+
+#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
+	UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
+#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
+
+#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
+
+#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
+
+#define instruction_pointer(regs) PT_REGS_IP(regs)
+
+struct task_struct;
+
+extern unsigned long getreg(struct task_struct *child, int regno);
+extern int putreg(struct task_struct *child, int regno, unsigned long value);
+extern int get_fpregs(unsigned long buf, struct task_struct *child);
+extern int set_fpregs(unsigned long buf, struct task_struct *child);
+extern int get_fpxregs(unsigned long buf, struct task_struct *child);
+extern int set_fpxregs(unsigned long buf, struct task_struct *tsk);
+
+extern void show_regs(struct pt_regs *regs);
+
+extern void send_sigtrap(struct task_struct *tsk, union uml_pt_regs *regs,
+			 int error_code);
+
+#endif
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/ptrace-i386.h b/include/asm-um/ptrace-i386.h
new file mode 100644
index 000000000000..9e47590ec293
--- /dev/null
+++ b/include/asm-um/ptrace-i386.h
@@ -0,0 +1,46 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_I386_H
+#define __UM_PTRACE_I386_H
+
+#include "sysdep/ptrace.h"
+#include "asm/ptrace-generic.h"
+
+#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
+#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
+#define PT_REGS_ECX(r) UPT_ECX(&(r)->regs)
+#define PT_REGS_EDX(r) UPT_EDX(&(r)->regs)
+#define PT_REGS_ESI(r) UPT_ESI(&(r)->regs)
+#define PT_REGS_EDI(r) UPT_EDI(&(r)->regs)
+#define PT_REGS_EBP(r) UPT_EBP(&(r)->regs)
+
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_EAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_EAX(r)
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/ptrace-x86_64.h b/include/asm-um/ptrace-x86_64.h
new file mode 100644
index 000000000000..c34be39b78b2
--- /dev/null
+++ b/include/asm-um/ptrace-x86_64.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_X86_64_H
+#define __UM_PTRACE_X86_64_H
+
+#include "linux/compiler.h"
+
+#define signal_fault signal_fault_x86_64
+#define __FRAME_OFFSETS /* Needed to get the R* macros */
+#include "asm/ptrace-generic.h"
+#undef signal_fault
+
+void signal_fault(struct pt_regs_subarch *regs, void *frame, char *where);
+
+#define FS_BASE (21 * sizeof(unsigned long))
+#define GS_BASE (22 * sizeof(unsigned long))
+#define DS (23 * sizeof(unsigned long))
+#define ES (24 * sizeof(unsigned long))
+#define FS (25 * sizeof(unsigned long))
+#define GS (26 * sizeof(unsigned long))
+
+#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
+#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
+#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
+#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
+#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
+#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
+#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
+#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
+#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
+#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
+#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
+#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
+#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
+#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
+#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
+
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+
+#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
+#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+/* XXX */
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
+
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/resource.h b/include/asm-um/resource.h
new file mode 100644
index 000000000000..c9b074001252
--- /dev/null
+++ b/include/asm-um/resource.h
@@ -0,0 +1,6 @@
+#ifndef __UM_RESOURCE_H
+#define __UM_RESOURCE_H
+
+#include "asm/arch/resource.h"
+
+#endif
diff --git a/include/asm-um/rwlock.h b/include/asm-um/rwlock.h
new file mode 100644
index 000000000000..ff383aafc9fe
--- /dev/null
+++ b/include/asm-um/rwlock.h
@@ -0,0 +1,6 @@
+#ifndef __UM_RWLOCK_H
+#define __UM_RWLOCK_H
+
+#include "asm/arch/rwlock.h"
+
+#endif
diff --git a/include/asm-um/rwsem.h b/include/asm-um/rwsem.h
new file mode 100644
index 000000000000..661c0e54702b
--- /dev/null
+++ b/include/asm-um/rwsem.h
@@ -0,0 +1,10 @@
+#ifndef __UM_RWSEM_H__
+#define __UM_RWSEM_H__
+
+#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 96)
+#define __builtin_expect(exp,c) (exp)
+#endif
+
+#include "asm/arch/rwsem.h"
+
+#endif
diff --git a/include/asm-um/scatterlist.h b/include/asm-um/scatterlist.h
new file mode 100644
index 000000000000..e92016aa2079
--- /dev/null
+++ b/include/asm-um/scatterlist.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SCATTERLIST_H
+#define __UM_SCATTERLIST_H
+
+#include "asm/arch/scatterlist.h"
+
+#endif
diff --git a/include/asm-um/sections.h b/include/asm-um/sections.h
new file mode 100644
index 000000000000..6b0231eefea8
--- /dev/null
+++ b/include/asm-um/sections.h
@@ -0,0 +1,7 @@
+#ifndef _UM_SECTIONS_H
+#define _UM_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-um/segment.h b/include/asm-um/segment.h
new file mode 100644
index 000000000000..55e40301f625
--- /dev/null
+++ b/include/asm-um/segment.h
@@ -0,0 +1,4 @@
+#ifndef __UM_SEGMENT_H
+#define __UM_SEGMENT_H
+
+#endif
diff --git a/include/asm-um/semaphore.h b/include/asm-um/semaphore.h
new file mode 100644
index 000000000000..ff13c34de421
--- /dev/null
+++ b/include/asm-um/semaphore.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SEMAPHORE_H
+#define __UM_SEMAPHORE_H
+
+#include "asm/arch/semaphore.h"
+
+#endif
diff --git a/include/asm-um/sembuf.h b/include/asm-um/sembuf.h
new file mode 100644
index 000000000000..1ae82c14ff86
--- /dev/null
+++ b/include/asm-um/sembuf.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SEMBUF_H
+#define __UM_SEMBUF_H
+
+#include "asm/arch/sembuf.h"
+
+#endif
diff --git a/include/asm-um/serial.h b/include/asm-um/serial.h
new file mode 100644
index 000000000000..61ad07cfd2d5
--- /dev/null
+++ b/include/asm-um/serial.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SERIAL_H
+#define __UM_SERIAL_H
+
+#include "asm/arch/serial.h"
+
+#endif
diff --git a/include/asm-um/setup.h b/include/asm-um/setup.h
new file mode 100644
index 000000000000..c85252e803c1
--- /dev/null
+++ b/include/asm-um/setup.h
@@ -0,0 +1,9 @@
+#ifndef SETUP_H_INCLUDED
+#define SETUP_H_INCLUDED
+
+/* POSIX mandated with _POSIX_ARG_MAX that we can rely on 4096 chars in the
+ * command line, so this choice is ok.*/
+
+#define COMMAND_LINE_SIZE 4096
+
+#endif		/* SETUP_H_INCLUDED */
diff --git a/include/asm-um/shmbuf.h b/include/asm-um/shmbuf.h
new file mode 100644
index 000000000000..9684d4a284a6
--- /dev/null
+++ b/include/asm-um/shmbuf.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SHMBUF_H
+#define __UM_SHMBUF_H
+
+#include "asm/arch/shmbuf.h"
+
+#endif
diff --git a/include/asm-um/shmparam.h b/include/asm-um/shmparam.h
new file mode 100644
index 000000000000..124c00174f6a
--- /dev/null
+++ b/include/asm-um/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SHMPARAM_H
+#define __UM_SHMPARAM_H
+
+#include "asm/arch/shmparam.h"
+
+#endif
diff --git a/include/asm-um/sigcontext-generic.h b/include/asm-um/sigcontext-generic.h
new file mode 100644
index 000000000000..164587014c61
--- /dev/null
+++ b/include/asm-um/sigcontext-generic.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SIGCONTEXT_GENERIC_H
+#define __UM_SIGCONTEXT_GENERIC_H
+
+#include "asm/arch/sigcontext.h"
+
+#endif
diff --git a/include/asm-um/sigcontext-i386.h b/include/asm-um/sigcontext-i386.h
new file mode 100644
index 000000000000..b88333f488bb
--- /dev/null
+++ b/include/asm-um/sigcontext-i386.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SIGCONTEXT_I386_H
+#define __UM_SIGCONTEXT_I386_H
+
+#include "asm/sigcontext-generic.h"
+
+#endif
diff --git a/include/asm-um/sigcontext-ppc.h b/include/asm-um/sigcontext-ppc.h
new file mode 100644
index 000000000000..2467f20eda99
--- /dev/null
+++ b/include/asm-um/sigcontext-ppc.h
@@ -0,0 +1,10 @@
+#ifndef __UM_SIGCONTEXT_PPC_H
+#define __UM_SIGCONTEXT_PPC_H
+
+#define pt_regs sys_pt_regs
+
+#include "asm/sigcontext-generic.h"
+
+#undef pt_regs
+
+#endif
diff --git a/include/asm-um/sigcontext-x86_64.h b/include/asm-um/sigcontext-x86_64.h
new file mode 100644
index 000000000000..b600e0b01e48
--- /dev/null
+++ b/include/asm-um/sigcontext-x86_64.h
@@ -0,0 +1,22 @@
+/* Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_SIGCONTEXT_X86_64_H
+#define __UM_SIGCONTEXT_X86_64_H
+
+#include "asm/sigcontext-generic.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/siginfo.h b/include/asm-um/siginfo.h
new file mode 100644
index 000000000000..bec6124c36d0
--- /dev/null
+++ b/include/asm-um/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SIGINFO_H
+#define __UM_SIGINFO_H
+
+#include "asm/arch/siginfo.h"
+
+#endif
diff --git a/include/asm-um/signal.h b/include/asm-um/signal.h
new file mode 100644
index 000000000000..52ed92cbce4c
--- /dev/null
+++ b/include/asm-um/signal.h
@@ -0,0 +1,29 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_SIGNAL_H
+#define __UM_SIGNAL_H
+
+/* Need to kill the do_signal() declaration in the i386 signal.h */
+
+#define do_signal do_signal_renamed
+#include "asm/arch/signal.h"
+#undef do_signal
+#undef ptrace_signal_deliver
+
+#define ptrace_signal_deliver(regs, cookie) do {} while(0)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/smp.h b/include/asm-um/smp.h
new file mode 100644
index 000000000000..4412d5d9c26b
--- /dev/null
+++ b/include/asm-um/smp.h
@@ -0,0 +1,27 @@
+#ifndef __UM_SMP_H
+#define __UM_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include "linux/config.h"
+#include "linux/bitops.h"
+#include "asm/current.h"
+#include "linux/cpumask.h"
+
+#define smp_processor_id() (current_thread->cpu)
+#define cpu_logical_map(n) (n)
+#define cpu_number_map(n) (n)
+#define PROC_CHANGE_PENALTY	15 /* Pick a number, any number */
+extern int hard_smp_processor_id(void);
+#define NO_PROC_ID -1
+
+extern int ncpus;
+
+
+extern inline void smp_cpus_done(unsigned int maxcpus)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/asm-um/socket.h b/include/asm-um/socket.h
new file mode 100644
index 000000000000..67886e42ef04
--- /dev/null
+++ b/include/asm-um/socket.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SOCKET_H
+#define __UM_SOCKET_H
+
+#include "asm/arch/socket.h"
+
+#endif
diff --git a/include/asm-um/sockios.h b/include/asm-um/sockios.h
new file mode 100644
index 000000000000..93ee1c55c4d6
--- /dev/null
+++ b/include/asm-um/sockios.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SOCKIOS_H
+#define __UM_SOCKIOS_H
+
+#include "asm/arch/sockios.h"
+
+#endif
diff --git a/include/asm-um/spinlock.h b/include/asm-um/spinlock.h
new file mode 100644
index 000000000000..f18c82886992
--- /dev/null
+++ b/include/asm-um/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __UM_SPINLOCK_H
+#define __UM_SPINLOCK_H
+
+#include "asm/arch/spinlock.h"
+
+#endif
diff --git a/include/asm-um/stat.h b/include/asm-um/stat.h
new file mode 100644
index 000000000000..83ed85ad2539
--- /dev/null
+++ b/include/asm-um/stat.h
@@ -0,0 +1,6 @@
+#ifndef __UM_STAT_H
+#define __UM_STAT_H
+
+#include "asm/arch/stat.h"
+
+#endif
diff --git a/include/asm-um/statfs.h b/include/asm-um/statfs.h
new file mode 100644
index 000000000000..ba6fb53e7f87
--- /dev/null
+++ b/include/asm-um/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _UM_STATFS_H
+#define _UM_STATFS_H
+
+#include "asm/arch/statfs.h"
+
+#endif
diff --git a/include/asm-um/string.h b/include/asm-um/string.h
new file mode 100644
index 000000000000..9a0571f6dd61
--- /dev/null
+++ b/include/asm-um/string.h
@@ -0,0 +1,7 @@
+#ifndef __UM_STRING_H
+#define __UM_STRING_H
+
+#include "asm/arch/string.h"
+#include "asm/archparam.h"
+
+#endif
diff --git a/include/asm-um/suspend.h b/include/asm-um/suspend.h
new file mode 100644
index 000000000000..f4e8e007f468
--- /dev/null
+++ b/include/asm-um/suspend.h
@@ -0,0 +1,4 @@
+#ifndef __UM_SUSPEND_H
+#define __UM_SUSPEND_H
+
+#endif
diff --git a/include/asm-um/system-generic.h b/include/asm-um/system-generic.h
new file mode 100644
index 000000000000..5bcfa35e7a22
--- /dev/null
+++ b/include/asm-um/system-generic.h
@@ -0,0 +1,47 @@
+#ifndef __UM_SYSTEM_GENERIC_H
+#define __UM_SYSTEM_GENERIC_H
+
+#include "asm/arch/system.h"
+
+#undef switch_to
+#undef local_irq_save
+#undef local_irq_restore
+#undef local_irq_disable
+#undef local_irq_enable
+#undef local_save_flags
+#undef local_irq_restore
+#undef local_irq_enable
+#undef local_irq_disable
+#undef local_irq_save
+#undef irqs_disabled
+
+extern void *switch_to(void *prev, void *next, void *last);
+
+extern int get_signals(void);
+extern int set_signals(int enable);
+extern int get_signals(void);
+extern void block_signals(void);
+extern void unblock_signals(void);
+
+#define local_save_flags(flags) do { typecheck(unsigned long, flags); \
+				     (flags) = get_signals(); } while(0)
+#define local_irq_restore(flags) do { typecheck(unsigned long, flags); \
+				      set_signals(flags); } while(0)
+
+#define local_irq_save(flags) do { local_save_flags(flags); \
+                                   local_irq_disable(); } while(0)
+
+#define local_irq_enable() unblock_signals()
+#define local_irq_disable() block_signals()
+
+#define irqs_disabled()                 \
+({                                      \
+        unsigned long flags;            \
+        local_save_flags(flags);        \
+        (flags == 0);                   \
+})
+
+extern void *_switch_to(void *prev, void *next, void *last);
+#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
+
+#endif
diff --git a/include/asm-um/system-i386.h b/include/asm-um/system-i386.h
new file mode 100644
index 000000000000..ea8381de3cc9
--- /dev/null
+++ b/include/asm-um/system-i386.h
@@ -0,0 +1,8 @@
+#ifndef __UM_SYSTEM_I386_H
+#define __UM_SYSTEM_I386_H
+
+#include "asm/system-generic.h"
+    
+#define __HAVE_ARCH_CMPXCHG 1
+
+#endif
diff --git a/include/asm-um/system-ppc.h b/include/asm-um/system-ppc.h
new file mode 100644
index 000000000000..17cde6640bf5
--- /dev/null
+++ b/include/asm-um/system-ppc.h
@@ -0,0 +1,12 @@
+#ifndef __UM_SYSTEM_PPC_H
+#define __UM_SYSTEM_PPC_H
+
+#define _switch_to _ppc_switch_to
+
+#include "asm/arch/system.h"
+
+#undef _switch_to
+ 
+#include "asm/system-generic.h"
+
+#endif
diff --git a/include/asm-um/system-x86_64.h b/include/asm-um/system-x86_64.h
new file mode 100644
index 000000000000..e1b61b580734
--- /dev/null
+++ b/include/asm-um/system-x86_64.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_SYSTEM_X86_64_H
+#define __UM_SYSTEM_X86_64_H
+
+#include "asm/system-generic.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/termbits.h b/include/asm-um/termbits.h
new file mode 100644
index 000000000000..5739c608a2cb
--- /dev/null
+++ b/include/asm-um/termbits.h
@@ -0,0 +1,6 @@
+#ifndef __UM_TERMBITS_H
+#define __UM_TERMBITS_H
+
+#include "asm/arch/termbits.h"
+
+#endif
diff --git a/include/asm-um/termios.h b/include/asm-um/termios.h
new file mode 100644
index 000000000000..d9f97b303311
--- /dev/null
+++ b/include/asm-um/termios.h
@@ -0,0 +1,6 @@
+#ifndef __UM_TERMIOS_H
+#define __UM_TERMIOS_H
+
+#include "asm/arch/termios.h"
+
+#endif
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
new file mode 100644
index 000000000000..bffb577bc54e
--- /dev/null
+++ b/include/asm-um/thread_info.h
@@ -0,0 +1,93 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_THREAD_INFO_H
+#define __UM_THREAD_INFO_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/types.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count;  /* 0 => preemptable, 
+						   <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user
+						   0-0xFFFFFFFF for kernel */
+	struct restart_block    restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	task:		&tsk,			\
+	exec_domain:	&default_exec_domain,	\
+	flags:		0,			\
+	cpu:		0,			\
+	preempt_count:	1,			\
+	addr_limit:	KERNEL_DS,		\
+	restart_block:  {			\
+		fn:  do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	unsigned long mask = PAGE_SIZE *
+		(1 << CONFIG_KERNEL_STACK_ORDER) - 1;
+        ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+	return ti;
+}
+
+/* thread information allocation */
+#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
+#define alloc_thread_info(tsk) \
+	((struct thread_info *) kmalloc(THREAD_SIZE, GFP_KERNEL))
+#define free_thread_info(ti) kfree(ti)
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling 
+					 * TIF_NEED_RESCHED 
+					 */
+#define TIF_RESTART_BLOCK 	4
+#define TIF_MEMDIE	 	5
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
+#define _TIF_RESTART_BLOCK	(1 << TIF_RESTART_BLOCK)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/timex.h b/include/asm-um/timex.h
new file mode 100644
index 000000000000..0f4ada08f748
--- /dev/null
+++ b/include/asm-um/timex.h
@@ -0,0 +1,13 @@
+#ifndef __UM_TIMEX_H
+#define __UM_TIMEX_H
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#define CLOCK_TICK_RATE (HZ)
+
+#endif
diff --git a/include/asm-um/tlb.h b/include/asm-um/tlb.h
new file mode 100644
index 000000000000..c640033bc1fd
--- /dev/null
+++ b/include/asm-um/tlb.h
@@ -0,0 +1,6 @@
+#ifndef __UM_TLB_H
+#define __UM_TLB_H
+
+#include <asm/arch/tlb.h>
+
+#endif
diff --git a/include/asm-um/tlbflush.h b/include/asm-um/tlbflush.h
new file mode 100644
index 000000000000..522aa30f7eaa
--- /dev/null
+++ b/include/asm-um/tlbflush.h
@@ -0,0 +1,48 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_TLBFLUSH_H
+#define __UM_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_kernel_vm() flushes the kernel vm area
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, 
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_kernel_vm(void);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void __flush_tlb_one(unsigned long addr);
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+}
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/topology.h b/include/asm-um/topology.h
new file mode 100644
index 000000000000..0905e4f21d42
--- /dev/null
+++ b/include/asm-um/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_TOPOLOGY_H
+#define _ASM_UM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif
diff --git a/include/asm-um/types.h b/include/asm-um/types.h
new file mode 100644
index 000000000000..816e9590fc73
--- /dev/null
+++ b/include/asm-um/types.h
@@ -0,0 +1,6 @@
+#ifndef __UM_TYPES_H
+#define __UM_TYPES_H
+
+#include "asm/arch/types.h"
+
+#endif
diff --git a/include/asm-um/uaccess.h b/include/asm-um/uaccess.h
new file mode 100644
index 000000000000..801710d00a40
--- /dev/null
+++ b/include/asm-um/uaccess.h
@@ -0,0 +1,102 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_UACCESS_H
+#define __UM_UACCESS_H
+
+#include "linux/sched.h"
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#include "um_uaccess.h"
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define __get_user(x, ptr) \
+({ \
+        const __typeof__(ptr) __private_ptr = ptr; \
+        __typeof__(*(__private_ptr)) __private_val; \
+        int __private_ret = -EFAULT; \
+        (x) = 0; \
+	if (__copy_from_user(&__private_val, (__private_ptr), \
+	    sizeof(*(__private_ptr))) == 0) {\
+        	(x) = (__typeof__(*(__private_ptr))) __private_val; \
+		__private_ret = 0; \
+	} \
+        __private_ret; \
+}) 
+
+#define get_user(x, ptr) \
+({ \
+        const __typeof__((*(ptr))) __user *private_ptr = (ptr); \
+        (access_ok(VERIFY_READ, private_ptr, sizeof(*private_ptr)) ? \
+	 __get_user(x, private_ptr) : ((x) = 0, -EFAULT)); \
+})
+
+#define __put_user(x, ptr) \
+({ \
+        __typeof__(ptr) __private_ptr = ptr; \
+        __typeof__(*(__private_ptr)) __private_val; \
+        int __private_ret = -EFAULT; \
+        __private_val = (__typeof__(*(__private_ptr))) (x); \
+        if (__copy_to_user((__private_ptr), &__private_val, \
+			   sizeof(*(__private_ptr))) == 0) { \
+		__private_ret = 0; \
+	} \
+        __private_ret; \
+})
+
+#define put_user(x, ptr) \
+({ \
+        __typeof__(*(ptr)) __user *private_ptr = (ptr); \
+        (access_ok(VERIFY_WRITE, private_ptr, sizeof(*private_ptr)) ? \
+	 __put_user(x, private_ptr) : -EFAULT); \
+})
+
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+
+struct exception_table_entry
+{
+        unsigned long insn;
+	unsigned long fixup;
+};
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/ucontext.h b/include/asm-um/ucontext.h
new file mode 100644
index 000000000000..5c96c0e607f0
--- /dev/null
+++ b/include/asm-um/ucontext.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_UCONTEXT_H
+#define _ASM_UM_UCONTEXT_H
+
+#include "asm/arch/ucontext.h"
+
+#endif
diff --git a/include/asm-um/unaligned.h b/include/asm-um/unaligned.h
new file mode 100644
index 000000000000..1d2497c57274
--- /dev/null
+++ b/include/asm-um/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef __UM_UNALIGNED_H
+#define __UM_UNALIGNED_H
+
+#include "asm/arch/unaligned.h"
+
+#endif
diff --git a/include/asm-um/unistd.h b/include/asm-um/unistd.h
new file mode 100644
index 000000000000..6fdde45cc053
--- /dev/null
+++ b/include/asm-um/unistd.h
@@ -0,0 +1,69 @@
+/* 
+ * Copyright (C) 2000 - 2004  Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef _UM_UNISTD_H_
+#define _UM_UNISTD_H_
+
+#include <linux/syscalls.h>
+#include "linux/resource.h"
+#include "asm/uaccess.h"
+
+extern int um_execve(const char *file, char *const argv[], char *const env[]);
+
+#ifdef __KERNEL__
+/* We get __ARCH_WANT_OLD_STAT and __ARCH_WANT_STAT64 from the base arch */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+static inline int execve(const char *filename, char *const argv[],
+			 char *const envp[])
+{
+	mm_segment_t fs;
+	int ret;
+
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+	ret = um_execve(filename, argv, envp);
+	set_fs(fs);
+
+	if (ret >= 0)
+		return ret;
+
+	errno = -(long)ret;
+	return -1;
+}
+
+int sys_execve(char *file, char **argv, char **env);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+#undef __KERNEL_SYSCALLS__
+#include "asm/arch/unistd.h"
+
+#endif /* _UM_UNISTD_H_*/
diff --git a/include/asm-um/user.h b/include/asm-um/user.h
new file mode 100644
index 000000000000..aae414ee1f5e
--- /dev/null
+++ b/include/asm-um/user.h
@@ -0,0 +1,6 @@
+#ifndef __UM_USER_H
+#define __UM_USER_H
+
+#include "asm/arch/user.h"
+
+#endif
diff --git a/include/asm-um/vga.h b/include/asm-um/vga.h
new file mode 100644
index 000000000000..903a592b00d0
--- /dev/null
+++ b/include/asm-um/vga.h
@@ -0,0 +1,6 @@
+#ifndef __UM_VGA_H
+#define __UM_VGA_H
+
+#include "asm/arch/vga.h"
+
+#endif
diff --git a/include/asm-um/vm-flags-i386.h b/include/asm-um/vm-flags-i386.h
new file mode 100644
index 000000000000..e0d24c568dbc
--- /dev/null
+++ b/include/asm-um/vm-flags-i386.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_I386_H
+#define __VM_FLAGS_I386_H
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif
diff --git a/include/asm-um/vm-flags-x86_64.h b/include/asm-um/vm-flags-x86_64.h
new file mode 100644
index 000000000000..3213edfa7888
--- /dev/null
+++ b/include/asm-um/vm-flags-x86_64.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_X86_64_H
+#define __VM_FLAGS_X86_64_H
+
+#define __VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define __VM_STACK_FLAGS 	(VM_GROWSDOWN | VM_READ | VM_WRITE | \
+				 VM_EXEC | VM_MAYREAD | VM_MAYWRITE | \
+				 VM_MAYEXEC)
+
+extern unsigned long vm_stack_flags, vm_stack_flags32;
+extern unsigned long vm_data_default_flags, vm_data_default_flags32;
+extern unsigned long vm_force_exec32;
+
+#ifdef TIF_IA32
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_IA32) ? vm_data_default_flags32 : \
+	  vm_data_default_flags)
+
+#define VM_STACK_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_IA32) ? vm_stack_flags32 : vm_stack_flags)
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS vm_data_default_flags
+
+#define VM_STACK_DEFAULT_FLAGS vm_stack_flags
+
+#endif
diff --git a/include/asm-um/xor.h b/include/asm-um/xor.h
new file mode 100644
index 000000000000..a19db3e17241
--- /dev/null
+++ b/include/asm-um/xor.h
@@ -0,0 +1,6 @@
+#ifndef __UM_XOR_H
+#define __UM_XOR_H
+
+#include "asm-generic/xor.h"
+
+#endif
diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h
new file mode 100644
index 000000000000..e9439a0708f6
--- /dev/null
+++ b/include/asm-v850/a.out.h
@@ -0,0 +1,21 @@
+#ifndef __V850_A_OUT_H__
+#define __V850_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+
+#endif /* __V850_A_OUT_H__ */
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
new file mode 100644
index 000000000000..3be77d5ecfce
--- /dev/null
+++ b/include/asm-v850/anna.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ANNA_H__
+#define __V850_ANNA_H__
+
+#include <asm/v850e2.h>		/* Based on V850E2 core.  */
+
+
+#define CPU_MODEL	"v850e2/anna"
+#define CPU_MODEL_LONG	"NEC V850E2/Anna"
+#define PLATFORM	"anna"
+#define PLATFORM_LONG	"NEC/Midas lab V850E2/Anna evaluation board"
+
+#define CPU_CLOCK_FREQ	200000000 /*  200MHz */
+#define SYS_CLOCK_FREQ	 33300000 /* 33.3MHz */
+
+
+/* 1MB of static RAM.  This memory is mirrored 64 times.  */
+#define SRAM_ADDR	0x04000000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* 64MB of DRAM.  */
+#define SDRAM_ADDR	0x08000000	
+#define SDRAM_SIZE	0x04000000 /* 64MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The Anna chip has
+   128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
+   every 128K, so we can use the `last mirror' (except for the portion at
+   the top which is overridden by I/O space).  In addition, the early
+   sample chip we're using has lots of memory errors in the dLB ram, so we
+   use a specially chosen location that has at least 20 bytes of contiguous
+   valid memory (xxxF0020 - xxxF003F).  */
+#define R0_RAM_ADDR			0xFFFF8020
+
+
+/* Anna specific control registers.  */
+#define ANNA_ILBEN_ADDR			0xFFFFF7F2
+#define ANNA_ILBEN			(*(volatile u16 *)ANNA_ILBEN_ADDR)
+
+
+/* I/O port P0-P3. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define ANNA_PORT_IO_ADDR(n)		(0xFFFFF400 + (n) * 2)
+#define ANNA_PORT_IO(n)			(*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ANNA_PORT_PM_ADDR(n)		(0xFFFFF410 + (n) * 2)
+#define ANNA_PORT_PM(n)			(*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)	(n)	/* Pnnn (pin) interrupts 0-15 */
+#define IRQ_INTP_NUM	16
+#define IRQ_INTOV(n)	(0x10 + (n)) /* 0-2 */
+#define IRQ_INTOV_NUM	2
+#define IRQ_INTCCC(n)	(0x12 + (n))
+#define IRQ_INTCCC_NUM	4
+#define IRQ_INTCMD(n)	(0x16 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTDMA(n)	(0x1C + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM	4
+#define IRQ_INTDMXER	0x20
+#define IRQ_INTSRE(n)	(0x21 + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x22 + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x23 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void anna_init_irqs (void);
+#endif
+
+
+/* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 2)
+#define V850E_UART_CHIP_NAME 		"V850E2/NA85E2A"
+
+/* This is the UART channel that's actually connected on the board.  */
+#define V850E_UART_CONSOLE_CHANNEL	1
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	anna_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void anna_uart_pre_configure (unsigned chan,
+				     unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
+#define V850E_UART_CTS(chan)	((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
+/* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = ANNA_PORT_IO(0); 			      \
+		   if (val)						      \
+			   ANNA_PORT_IO(0) = old & ~0x80;		      \
+		   else							      \
+			   ANNA_PORT_IO(0) = old | 0x80;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the Anna actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
new file mode 100644
index 000000000000..659bc910ffd7
--- /dev/null
+++ b/include/asm-v850/as85ep1.h
@@ -0,0 +1,158 @@
+/*
+ * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_AS85EP1_H__
+#define __V850_AS85EP1_H__
+
+#include <asm/v850e.h>
+
+
+#define CPU_MODEL	"as85ep1"
+#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
+#define PLATFORM	"AS85EP1"
+#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
+
+#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
+#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
+
+
+/* 1MB of static RAM.  */
+#define SRAM_ADDR	0x00400000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* About 58MB of DRAM.  This can actually be at one of two positions,
+   determined by jump JP3; we have to use the first position because the
+   second is partially out of processor instruction addressing range
+   (though in the second position there's actually 64MB available).  */
+#define SDRAM_ADDR	0x00600000
+#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The AS85EP1 chip
+   16K of internal RAM located slightly before I/O space.  */
+#define R0_RAM_ADDR	0xFFFF8000
+
+
+/* AS85EP1 specific control registers.  */
+#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
+#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
+#define AS85EP1_BSC_ADDR	0xFFFFF066
+#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
+#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
+#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
+#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
+#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
+#define AS85EP1_BCC_ADDR	0xFFFFF488
+#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
+#define AS85EP1_ASC_ADDR	0xFFFFF48A
+#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
+#define AS85EP1_BCP_ADDR	0xFFFFF48C
+#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
+#define AS85EP1_LBS_ADDR	0xFFFFF48E
+#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
+#define AS85EP1_BMC_ADDR	0xFFFFF498
+#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
+#define AS85EP1_PRC_ADDR	0xFFFFF49A
+#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
+#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
+#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
+#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
+#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
+#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
+#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
+
+
+
+/* I/O port P0-P13. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
+#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
+#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
+#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTCCC(n)	(0x0C + (n))
+#define IRQ_INTCCC_NUM	8
+#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void as85ep1_init_irqs (void);
+#endif
+
+
+/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
+#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void as85ep1_uart_pre_configure (unsigned chan,
+					unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
+#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
+/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = AS85EP1_PORT_IO(5); 			      \
+		   if (val)						      \
+			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
+		   else							      \
+			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h
new file mode 100644
index 000000000000..bf1e785a5dde
--- /dev/null
+++ b/include/asm-v850/asm.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-v850/asm.h -- Macros for writing assembly code
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#define G_ENTRY(name)							      \
+   .balign 4;								      \
+   .globl name;								      \
+   .type  name,@function;						      \
+   name
+#define G_DATA(name)							      \
+   .globl name;								      \
+   .type  name,@object;							      \
+   name
+#define END(name)							      \
+   .size  name,.-name
+
+#define L_ENTRY(name)							      \
+   .balign 4;								      \
+   .type  name,@function;						      \
+   name
+#define L_DATA(name)							      \
+   .type  name,@object;							      \
+   name
diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h
new file mode 100644
index 000000000000..8284aa7363f2
--- /dev/null
+++ b/include/asm-v850/atomic.h
@@ -0,0 +1,99 @@
+/*
+ * include/asm-v850/atomic.h -- Atomic operations
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ATOMIC_H__
+#define __V850_ATOMIC_H__
+
+#include <linux/config.h>
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+typedef struct { int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+extern __inline__ int atomic_add_return (int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int res;
+
+	local_irq_save (flags);
+	res = v->counter + i;
+	v->counter = res;
+	local_irq_restore (flags);
+
+	return res;
+}
+
+static __inline__ int atomic_sub_return (int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int res;
+
+	local_irq_save (flags);
+	res = v->counter - i;
+	v->counter = res;
+	local_irq_restore (flags);
+
+	return res;
+}
+
+static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	local_irq_save (flags);
+	*addr &= ~mask;
+	local_irq_restore (flags);
+}
+
+#endif
+
+#define atomic_add(i, v)	atomic_add_return ((i), (v))
+#define atomic_sub(i, v)	atomic_sub_return ((i), (v))
+
+#define atomic_dec_return(v)	atomic_sub_return (1, (v))
+#define atomic_inc_return(v)	atomic_add_return (1, (v))
+#define atomic_inc(v) 		atomic_inc_return (v)
+#define atomic_dec(v) 		atomic_dec_return (v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return ((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return (1, (v)) == 0)
+#define atomic_add_negative(i,v)	(atomic_add_return ((i), (v)) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __V850_ATOMIC_H__ */
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
new file mode 100644
index 000000000000..7c4ecaf5151c
--- /dev/null
+++ b/include/asm-v850/bitops.h
@@ -0,0 +1,355 @@
+/*
+ * include/asm-v850/bitops.h -- Bit operations
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 1992  Linus Torvalds.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef __V850_BITOPS_H__
+#define __V850_BITOPS_H__
+
+
+#include <linux/config.h>
+#include <linux/compiler.h>	/* unlikely  */
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* interrupt enable/disable */
+
+
+#ifdef __KERNEL__
+
+/*
+ * The __ functions are not atomic
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+extern __inline__ unsigned long ffz (unsigned long word)
+{
+	unsigned long result = 0;
+
+	while (word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+
+/* In the following constant-bit-op macros, a "g" constraint is used when
+   we really need an integer ("i" constraint).  This is to avoid
+   warnings/errors from the compiler in the case where the associated
+   operand _isn't_ an integer, and shouldn't produce bogus assembly because
+   use of that form is protected by a guard statement that checks for
+   constants, and should otherwise be removed by the optimizer.  This
+   _usually_ works -- however, __builtin_constant_p returns true for a
+   variable with a known constant value too, and unfortunately gcc will
+   happily put the variable in a register and use the register for the "g"
+   constraint'd asm operand.  To avoid the latter problem, we add a
+   constant offset to the operand and subtract it back in the asm code;
+   forcing gcc to do arithmetic on the value is usually enough to get it
+   to use a real constant value.  This is horrible, and ultimately
+   unreliable too, but it seems to work for now (hopefully gcc will offer
+   us more control in the future, so we can do a better job).  */
+
+#define __const_bit_op(op, nr, addr)					\
+  ({ __asm__ (op " (%0 - 0x123), %1"					\
+	      :: "g" (((nr) & 0x7) + 0x123),				\
+		 "m" (*((char *)(addr) + ((nr) >> 3)))			\
+	      : "memory"); })
+#define __var_bit_op(op, nr, addr)					\
+  ({ int __nr = (nr);							\
+     __asm__ (op " %0, [%1]"						\
+	      :: "r" (__nr & 0x7),					\
+		 "r" ((char *)(addr) + (__nr >> 3))			\
+	      : "memory"); })
+#define __bit_op(op, nr, addr)						\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_bit_op (op, nr, addr)					\
+   : __var_bit_op (op, nr, addr))
+
+#define __set_bit(nr, addr)		__bit_op ("set1", nr, addr)
+#define __clear_bit(nr, addr)		__bit_op ("clr1", nr, addr)
+#define __change_bit(nr, addr)		__bit_op ("not1", nr, addr)
+
+/* The bit instructions used by `non-atomic' variants are actually atomic.  */
+#define set_bit __set_bit
+#define clear_bit __clear_bit
+#define change_bit __change_bit
+
+
+#define __const_tns_bit_op(op, nr, addr)				      \
+  ({ int __tns_res;							      \
+     __asm__ __volatile__ (						      \
+	     "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2"    \
+	     : "=&r" (__tns_res)					      \
+	     : "g" (((nr) & 0x7) + 0x123),				      \
+	       "m" (*((char *)(addr) + ((nr) >> 3)))			      \
+	     : "memory");						      \
+     __tns_res;								      \
+  })
+#define __var_tns_bit_op(op, nr, addr)					      \
+  ({ int __nr = (nr);							      \
+     int __tns_res;							      \
+     __asm__ __volatile__ (						      \
+	     "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]"		      \
+	      : "=&r" (__tns_res)					      \
+	      : "r" (__nr & 0x7),					      \
+		"r" ((char *)(addr) + (__nr >> 3))			      \
+	      : "memory");						      \
+     __tns_res;								      \
+  })
+#define __tns_bit_op(op, nr, addr)					\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_tns_bit_op (op, nr, addr)					\
+   : __var_tns_bit_op (op, nr, addr))
+#define __tns_atomic_bit_op(op, nr, addr)				\
+  ({ int __tns_atomic_res, __tns_atomic_flags;				\
+     local_irq_save (__tns_atomic_flags);				\
+     __tns_atomic_res = __tns_bit_op (op, nr, addr);			\
+     local_irq_restore (__tns_atomic_flags);				\
+     __tns_atomic_res;							\
+  })
+
+#define __test_and_set_bit(nr, addr)	__tns_bit_op ("set1", nr, addr)
+#define test_and_set_bit(nr, addr)	__tns_atomic_bit_op ("set1", nr, addr)
+
+#define __test_and_clear_bit(nr, addr)	__tns_bit_op ("clr1", nr, addr)
+#define test_and_clear_bit(nr, addr)	__tns_atomic_bit_op ("clr1", nr, addr)
+
+#define __test_and_change_bit(nr, addr)	__tns_bit_op ("not1", nr, addr)
+#define test_and_change_bit(nr, addr)	__tns_atomic_bit_op ("not1", nr, addr)
+
+
+#define __const_test_bit(nr, addr)					      \
+  ({ int __test_bit_res;						      \
+     __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0"		      \
+			   : "=r" (__test_bit_res)			      \
+			   : "g" (((nr) & 0x7) + 0x123),		      \
+			     "m" (*((const char *)(addr) + ((nr) >> 3))));    \
+     __test_bit_res;							      \
+  })
+extern __inline__ int __test_bit (int nr, const void *addr)
+{
+	int res;
+	__asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0"
+			      : "=r" (res)
+			      : "r" (nr & 0x7), "r" (addr + (nr >> 3)));
+	return res;
+}
+#define test_bit(nr,addr)						\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_test_bit ((nr), (addr))					\
+   : __test_bit ((nr), (addr)))
+
+
+/* clear_bit doesn't provide any barrier for the compiler.  */
+#define smp_mb__before_clear_bit()	barrier ()
+#define smp_mb__after_clear_bit()	barrier ()
+
+
+#define find_first_zero_bit(addr, size) \
+  find_next_zero_bit ((addr), (size), 0)
+
+extern __inline__ int find_next_zero_bit (void *addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = * (p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~ (tmp = * (p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+ found_first:
+	tmp |= ~0UL >> size;
+ found_middle:
+	return result + ffz (tmp);
+}
+
+
+/* This is the same as generic_ffs, but we can't use that because it's
+   inline and the #include order mucks things up.  */
+static inline int generic_ffs_for_find_next_bit(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Find next one bit in a bitmap reasonably efficiently.
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + generic_ffs_for_find_next_bit(tmp);
+}
+
+/*
+ * find_first_bit - find the first set bit in a memory region
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+
+#define ffs(x) generic_ffs (x)
+#define fls(x) generic_fls (x)
+#define __ffs(x) ffs(x)
+
+
+/*
+ * This is just `generic_ffs' from <linux/bitops.h>, except that it assumes
+ * that at least one bit is set, and returns the real index of the bit
+ * (rather than the bit index + 1, like ffs does).
+ */
+static inline int sched_ffs(int x)
+{
+	int r = 0;
+
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is set.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	unsigned offs = 0;
+	while (! *b) {
+		b++;
+		offs += 32;
+	}
+	return sched_ffs (*b) + offs;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight32(x) 			generic_hweight32 (x)
+#define hweight16(x) 			generic_hweight16 (x)
+#define hweight8(x) 			generic_hweight8 (x)
+
+#define ext2_set_bit			test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)      test_and_set_bit(n,a)
+#define ext2_clear_bit			test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a)    test_and_clear_bit(n,a)
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit		test_and_set_bit
+#define minix_set_bit			set_bit
+#define minix_test_and_clear_bit	test_and_clear_bit
+#define minix_test_bit 			test_bit
+#define minix_find_first_zero_bit 	find_first_zero_bit
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_BITOPS_H__ */
diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h
new file mode 100644
index 000000000000..c778916bf7f2
--- /dev/null
+++ b/include/asm-v850/bug.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-v850/bug.h -- Bug reporting
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_BUG_H__
+#define __V850_BUG_H__
+
+extern void __bug (void) __attribute__ ((noreturn));
+#define BUG()		__bug()
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* __V850_BUG_H__ */
diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h
new file mode 100644
index 000000000000..71110a65c1d7
--- /dev/null
+++ b/include/asm-v850/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-v850e/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h
new file mode 100644
index 000000000000..a6f07530050e
--- /dev/null
+++ b/include/asm-v850/byteorder.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/byteorder.h -- Endian id and conversion ops
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_BYTEORDER_H__
+#define __V850_BYTEORDER_H__
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word)
+{
+	__u32 res;
+	__asm__ ("bsw %1, %0" : "=r" (res) : "r" (word));
+	return res;
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word)
+{
+	__u16 res;
+	__asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word));
+	return res;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* __V850_BYTEORDER_H__ */
diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h
new file mode 100644
index 000000000000..027f8c9090cd
--- /dev/null
+++ b/include/asm-v850/cache.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/cache.h -- Cache operations
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CACHE_H__
+#define __V850_CACHE_H__
+
+/* All cache operations are machine-dependent.  */
+#include <asm/machdep.h>
+
+#ifndef L1_CACHE_BYTES
+/* This processor has no cache, so just choose an arbitrary value.  */
+#define L1_CACHE_BYTES		16
+#endif
+
+#endif /* __V850_CACHE_H__ */
diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h
new file mode 100644
index 000000000000..e1a87f82f1a4
--- /dev/null
+++ b/include/asm-v850/cacheflush.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/cacheflush.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CACHEFLUSH_H__
+#define __V850_CACHEFLUSH_H__
+
+/* Somebody depends on this; sigh...  */
+#include <linux/mm.h>
+
+#include <asm/machdep.h>
+
+
+/* The following are all used by the kernel in ways that only affect
+   systems with MMUs, so we don't need them.  */
+#define flush_cache_all()			((void)0)
+#define flush_cache_mm(mm)			((void)0)
+#define flush_cache_range(vma, start, end)	((void)0)
+#define flush_cache_page(vma, vmaddr, pfn)	((void)0)
+#define flush_dcache_page(page)			((void)0)
+#define flush_dcache_mmap_lock(mapping)		((void)0)
+#define flush_dcache_mmap_unlock(mapping)	((void)0)
+#define flush_cache_vmap(start, end)		((void)0)
+#define flush_cache_vunmap(start, end)		((void)0)
+
+#ifdef CONFIG_NO_CACHE
+
+/* Some systems have no cache at all, in which case we don't need these
+   either.  */
+#define flush_icache()				((void)0)
+#define flush_icache_range(start, end)		((void)0)
+#define flush_icache_page(vma,pg)		((void)0)
+#define flush_icache_user_range(vma,pg,adr,len)	((void)0)
+#define flush_cache_sigtramp(vaddr)		((void)0)
+
+#else /* !CONFIG_NO_CACHE */
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+/* Otherwise, somebody had better define them.  */
+extern void flush_icache (void);
+extern void flush_icache_range (unsigned long start, unsigned long end);
+extern void flush_icache_page (struct vm_area_struct *vma, struct page *page);
+extern void flush_icache_user_range (struct vm_area_struct *vma,
+				     struct page *page,
+				     unsigned long adr, int len);
+extern void flush_cache_sigtramp (unsigned long addr);
+
+#endif /* CONFIG_NO_CACHE */
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* __V850_CACHEFLUSH_H__ */
diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h
new file mode 100644
index 000000000000..d3aedb7bfc5c
--- /dev/null
+++ b/include/asm-v850/checksum.h
@@ -0,0 +1,115 @@
+/*
+ * include/asm-v850/checksum.h -- Checksum ops
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CHECKSUM_H__
+#define __V850_CHECKSUM_H__
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial (const unsigned char * buff, int len,
+				  unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned csum_partial_copy (const char *src, char *dst, int len,
+				   unsigned sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned csum_partial_copy_from_user (const char *src, char *dst,
+					     int len, unsigned sum,
+					     int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy ((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum (unsigned char *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+static inline unsigned int csum_fold (unsigned long sum)
+{
+	unsigned int result;
+	/*
+			        %0		%1
+	      hsw %1, %0	H     L		L     H
+	      add %1, %0	H     L		H+L+C H+L
+	*/
+	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
+	return (~result) >> 16;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned int
+csum_tcpudp_nofold (unsigned long saddr, unsigned long daddr,
+		    unsigned short len,
+		    unsigned short proto, unsigned int sum)
+{
+	int __carry;
+	__asm__ ("add %2, %0;"
+		 "setf c, %1;"
+		 "add %1, %0;"
+		 "add %3, %0;"
+		 "setf c, %1;"
+		 "add %1, %0;"
+		 "add %4, %0;"
+		 "setf c, %1;"
+		 "add %1, %0"
+		 : "=&r" (sum), "=&r" (__carry)
+		 : "r" (daddr), "r" (saddr),
+		 "r" (ntohs (len) + (proto << 8)),
+		 "0" (sum));
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic (unsigned long saddr, unsigned long daddr,
+		   unsigned short len,
+		   unsigned short proto, unsigned int sum)
+{
+	return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern unsigned short ip_compute_csum (const unsigned char * buff, int len);
+
+
+#endif /* __V850_CHECKSUM_H__ */
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
new file mode 100644
index 000000000000..2b622adccae5
--- /dev/null
+++ b/include/asm-v850/clinkage.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions
+ *
+ *  Copyright (C) 2001,02  NEC Corporatione
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __CLINKAGE_H__
+#define __V850_CLINKAGE_H__
+
+#include <asm/macrology.h>
+#include <asm/asm.h>
+
+#define C_SYMBOL_NAME(name) 	macrology_paste(_, name)
+#define C_SYMBOL_STRING(name)	macrology_stringify(C_SYMBOL_NAME(name))
+#define C_ENTRY(name)		G_ENTRY(C_SYMBOL_NAME(name))
+#define C_DATA(name)		G_DATA(C_SYMBOL_NAME(name))
+#define C_END(name)		END(C_SYMBOL_NAME(name))
+
+#endif /* __V850_CLINKAGE_H__ */
diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h
new file mode 100644
index 000000000000..7c799c33b8a9
--- /dev/null
+++ b/include/asm-v850/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __V850_CPUTIME_H
+#define __V850_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __V850_CPUTIME_H */
diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h
new file mode 100644
index 000000000000..30aae5673770
--- /dev/null
+++ b/include/asm-v850/current.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-v850/current.h -- Current task
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CURRENT_H__
+#define __V850_CURRENT_H__
+
+#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
+#include <linux/thread_info.h>
+#endif
+
+#include <asm/macrology.h>
+
+
+/* Register used to hold the current task pointer while in the kernel.
+   Any `call clobbered' register without a special meaning should be OK,
+   but check asm/v850/kernel/entry.S to be sure.  */
+#define CURRENT_TASK_REGNUM	16
+#define CURRENT_TASK 		macrology_paste (r, CURRENT_TASK_REGNUM)
+
+
+#ifdef __ASSEMBLY__
+
+/* Put a pointer to the current task structure into REG.  */
+#define GET_CURRENT_TASK(reg)						\
+	GET_CURRENT_THREAD(reg);					\
+	ld.w	TI_TASK[reg], reg
+
+#else /* !__ASSEMBLY__ */
+
+/* A pointer to the current task.  */
+register struct task_struct *current					\
+   __asm__ (macrology_stringify (CURRENT_TASK));
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _V850_CURRENT_H */
diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h
new file mode 100644
index 000000000000..1ce65d48a7c5
--- /dev/null
+++ b/include/asm-v850/delay.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-v850/delay.h -- Delay routines, using a pre-computed
+ * 	"loops_per_second" value
+ *
+ *  Copyright (C) 2001,03  NEC Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 1994 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef __V850_DELAY_H__
+#define __V850_DELAY_H__
+
+#include <asm/param.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+	if (loops)
+		__asm__ __volatile__ ("1: add -1, %0; bnz 1b"
+				      : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)  
+ */
+
+extern unsigned long loops_per_jiffy;
+
+extern __inline__ void udelay(unsigned long usecs)
+{
+	register unsigned long full_loops, part_loops;
+
+	full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy;
+	usecs %= (1000000 / HZ);
+	part_loops = (usecs * HZ * loops_per_jiffy) / 1000000;
+
+	__delay(full_loops + part_loops);
+}
+
+#endif /* __V850_DELAY_H__ */
diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-v850/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h
new file mode 100644
index 000000000000..c63fb50ec9ef
--- /dev/null
+++ b/include/asm-v850/dma-mapping.h
@@ -0,0 +1,12 @@
+#ifndef __V850_DMA_MAPPING_H__
+#define __V850_DMA_MAPPING_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif /* __V850_DMA_MAPPING_H__ */
diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h
new file mode 100644
index 000000000000..2369849e2d0a
--- /dev/null
+++ b/include/asm-v850/dma.h
@@ -0,0 +1,18 @@
+#ifndef __V850_DMA_H__
+#define __V850_DMA_H__
+
+/* What should this be?  */
+#define MAX_DMA_ADDRESS	0xFFFFFFFF
+
+/* reserve a DMA channel */
+extern int request_dma (unsigned int dmanr, const char * device_id);
+/* release it again */
+extern void free_dma (unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* __V850_DMA_H__ */
diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h
new file mode 100644
index 000000000000..7db8edffb1c6
--- /dev/null
+++ b/include/asm-v850/elf.h
@@ -0,0 +1,101 @@
+#ifndef __V850_ELF_H__
+#define __V850_ELF_H__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/byteorder.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)  \
+  ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850)
+
+
+/* v850 relocation types.  */
+#define R_V850_NONE		0
+#define R_V850_9_PCREL		1
+#define R_V850_22_PCREL		2
+#define R_V850_HI16_S		3
+#define R_V850_HI16		4
+#define R_V850_LO16		5
+#define R_V850_32		6
+#define R_V850_16		7
+#define R_V850_8		8
+#define R_V850_SDA_16_16_OFFSET	9	/* For ld.b, st.b, set1, clr1,
+					   not1, tst1, movea, movhi */
+#define R_V850_SDA_15_16_OFFSET	10	/* For ld.w, ld.h, ld.hu, st.w, st.h */
+#define R_V850_ZDA_16_16_OFFSET	11	/* For ld.b, st.b, set1, clr1,
+					   not1, tst1, movea, movhi */
+#define R_V850_ZDA_15_16_OFFSET	12	/* For ld.w, ld.h, ld.hu, st.w, st.h */
+#define R_V850_TDA_6_8_OFFSET	13	/* For sst.w, sld.w */
+#define R_V850_TDA_7_8_OFFSET	14	/* For sst.h, sld.h */
+#define R_V850_TDA_7_7_OFFSET	15	/* For sst.b, sld.b */
+#define R_V850_TDA_16_16_OFFSET	16	/* For set1, clr1, not1, tst1,
+					   movea, movhi */
+#define R_V850_NUM		17
+
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_V850
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr)					      \
+  do {									      \
+	 _r->gpr[0] =  _r->gpr[1] =  _r->gpr[2] =  _r->gpr[3] =		      \
+	 _r->gpr[4] =  _r->gpr[5] =  _r->gpr[6] =  _r->gpr[7] =		      \
+	 _r->gpr[8] =  _r->gpr[9] = _r->gpr[10] = _r->gpr[11] =		      \
+	_r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] =		      \
+	_r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] =		      \
+	_r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] =		      \
+	_r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] =		      \
+	_r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] =		      \
+	0;								      \
+  } while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __V850_ELF_H__ */
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
new file mode 100644
index 000000000000..d9df8ac48584
--- /dev/null
+++ b/include/asm-v850/entry.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ENTRY_H__
+#define __V850_ENTRY_H__
+
+
+#include <asm/ptrace.h>
+#include <asm/machdep.h>
+
+
+/* These are special variables using by the kernel trap/interrupt code
+   to save registers in, at a time when there are no spare registers we
+   can use to do so, and we can't depend on the value of the stack
+   pointer.  This means that they must be within a signed 16-bit
+   displacement of 0x00000000.  */
+
+#define KERNEL_VAR_SPACE_ADDR	R0_RAM_ADDR
+
+#ifdef __ASSEMBLY__
+#define KERNEL_VAR(addr)	addr[r0]
+#else
+#define KERNEL_VAR(addr)	(*(volatile unsigned long *)(addr))
+#endif
+
+/* Kernel stack pointer, 4 bytes.  */
+#define KSP_ADDR		(KERNEL_VAR_SPACE_ADDR +  0)
+#define KSP			KERNEL_VAR (KSP_ADDR)
+/* 1 if in kernel-mode, 0 if in user mode, 1 byte.  */
+#define KM_ADDR 		(KERNEL_VAR_SPACE_ADDR +  4)
+#define KM			KERNEL_VAR (KM_ADDR)
+/* Temporary storage for interrupt handlers, 4 bytes.  */
+#define INT_SCRATCH_ADDR	(KERNEL_VAR_SPACE_ADDR +  8)
+#define INT_SCRATCH		KERNEL_VAR (INT_SCRATCH_ADDR)
+/* Where the stack-pointer is saved when jumping to various sorts of
+   interrupt handlers.  ENTRY_SP is used by everything except NMIs,
+   which have their own location.  Higher-priority NMIs can clobber the
+   value written by a lower priority NMI, since they can't be disabled,
+   but that's OK, because only NMI0 (the lowest-priority one) is allowed
+   to return.  */
+#define ENTRY_SP_ADDR		(KERNEL_VAR_SPACE_ADDR + 12)
+#define ENTRY_SP		KERNEL_VAR (ENTRY_SP_ADDR)
+#define NMI_ENTRY_SP_ADDR	(KERNEL_VAR_SPACE_ADDR + 16)
+#define NMI_ENTRY_SP		KERNEL_VAR (NMI_ENTRY_SP_ADDR)
+
+#ifdef CONFIG_RESET_GUARD
+/* Used to detect unexpected resets (since the v850 has no MMU, any call
+   through a null pointer will jump to the reset vector).  We detect
+   such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
+   this location.  Properly resetting the machine stores zero there, so
+   it shouldn't trigger the guard; the power-on value is uncertain, but
+   it's unlikely to be RESET_GUARD_ACTIVE.  */
+#define RESET_GUARD_ADDR	(KERNEL_VAR_SPACE_ADDR + 28)
+#define RESET_GUARD		KERNEL_VAR (RESET_GUARD_ADDR)
+#define RESET_GUARD_ACTIVE	0xFAB4BEEF
+#endif /* CONFIG_RESET_GUARD */
+
+#ifdef CONFIG_V850E_HIGHRES_TIMER
+#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
+#define HIGHRES_TIMER_SLOW_TICKS     KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
+#endif /* CONFIG_V850E_HIGHRES_TIMER */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_RESET_GUARD
+/* Turn off reset guard, so that resetting the machine works normally.
+   This should be called in the various machine_halt, etc., functions.  */
+static inline void disable_reset_guard (void)
+{
+	RESET_GUARD = 0;
+}
+#endif /* CONFIG_RESET_GUARD */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+   suitable for a function call stack frame.  */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+   C calling conventions, in addition to the space used by the struct
+   pt_regs that actually holds saved values.  */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments.  */
+
+
+#ifdef __ASSEMBLY__
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+#else /* !__ASSEMBLY__ */
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE	       (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
+
+#endif /* __ASSEMBLY__ */
+
+
+/* Offset of the struct pt_regs in a state save frame.  */
+#define STATE_SAVE_PT_OFFSET	STATE_SAVE_ARG_SPACE
+
+
+#endif /* __V850_ENTRY_H__ */
diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h
new file mode 100644
index 000000000000..31c91df01205
--- /dev/null
+++ b/include/asm-v850/errno.h
@@ -0,0 +1,6 @@
+#ifndef __V850_ERRNO_H__
+#define __V850_ERRNO_H__
+
+#include <asm-generic/errno.h>
+
+#endif /* __V850_ERRNO_H__ */
diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h
new file mode 100644
index 000000000000..31d4b5961221
--- /dev/null
+++ b/include/asm-v850/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef __V850_FCNTL_H__
+#define __V850_FCNTL_H__
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	  0003
+#define O_RDONLY	    00
+#define O_WRONLY	    01
+#define O_RDWR		    02
+#define O_CREAT		  0100	/* not fcntl */
+#define O_EXCL		  0200	/* not fcntl */
+#define O_NOCTTY	  0400	/* not fcntl */
+#define O_TRUNC		 01000	/* not fcntl */
+#define O_APPEND	 02000
+#define O_NONBLOCK	 04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		010000
+#define FASYNC		020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	040000	/* must be a directory */
+#define O_NOFOLLOW     0100000	/* don't follow links */
+#define O_DIRECT       0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE    0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* __V850_FCNTL_H__ */
diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h
new file mode 100644
index 000000000000..3888f59d6881
--- /dev/null
+++ b/include/asm-v850/flat.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-v850/flat.h -- uClinux flat-format executables
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_FLAT_H__
+#define __V850_FLAT_H__
+
+/* The amount by which a relocation can exceed the program image limits
+   without being regarded as an error.  On the v850, the relocations of
+   some base-pointers can be offset by 0x8000 (to allow better usage of the
+   space offered by 16-bit signed offsets -- in most cases the offsets used
+   with such a base-pointer will be negative).  */
+
+#define	flat_reloc_valid(reloc, size)	((reloc) <= (size + 0x8000))
+
+#define	flat_stack_align(sp)		/* nothing needed */
+#define	flat_argvp_envp_on_stack()	0
+#define	flat_old_ram_flag(flags)	(flags)
+
+/* We store the type of relocation in the top 4 bits of the `relval.' */
+
+/* Convert a relocation entry into an address.  */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+	return relval & 0x0fffffff; /* Mask out top 4-bits */
+}
+
+#define flat_v850_get_reloc_type(relval) ((relval) >> 28)
+
+#define FLAT_V850_R_32		0 /* Normal 32-bit reloc */
+#define FLAT_V850_R_HI16S_LO15	1 /* High 16-bits + signed 15-bit low field */
+#define FLAT_V850_R_HI16S_LO16	2 /* High 16-bits + signed 16-bit low field */
+
+/* Extract the address to be relocated from the symbol reference at RP;
+   RELVAL is the raw relocation-table entry from which RP is derived.
+   For the v850, RP should always be half-word aligned.  */
+static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
+						   unsigned long relval,
+						   unsigned long flags)
+{
+	short *srp = (short *)rp;
+
+	switch (flat_v850_get_reloc_type (relval))
+	{
+	case FLAT_V850_R_32:
+		/* Simple 32-bit address.  */
+		return srp[0] | (srp[1] << 16);
+
+	case FLAT_V850_R_HI16S_LO16:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the 2nd word of the 32-bit instruction
+		   following that, respectively.  The low half is _signed_
+		   so we have to sign-extend it and add it to the upper
+		   half instead of simply or-ing them together.
+
+		   Unlike most relocated address, this one is stored in
+		   native (little-endian) byte-order to avoid problems with
+		   trashing the low-order bit, so we have to convert to
+		   network-byte-order before returning, as that's what the
+		   caller expects.  */
+		return htonl ((srp[0] << 16) + srp[2]);
+
+	case FLAT_V850_R_HI16S_LO15:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the upper 15 bits of the 2nd word of the
+		   32-bit instruction following that, respectively.  The
+		   low half is _signed_ so we have to sign-extend it and
+		   add it to the upper half instead of simply or-ing them
+		   together.  The lowest bit is always zero.
+
+		   Unlike most relocated address, this one is stored in
+		   native (little-endian) byte-order to avoid problems with
+		   trashing the low-order bit, so we have to convert to
+		   network-byte-order before returning, as that's what the
+		   caller expects.  */
+		return htonl ((srp[0] << 16) + (srp[2] & ~0x1));
+
+	default:
+		return ~0;	/* bogus value */
+	}
+}
+
+/* Insert the address ADDR into the symbol reference at RP;
+   RELVAL is the raw relocation-table entry from which RP is derived.
+   For the v850, RP should always be half-word aligned.  */
+static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr,
+					unsigned long relval)
+{
+	short *srp = (short *)rp;
+
+	switch (flat_v850_get_reloc_type (relval)) {
+	case FLAT_V850_R_32:
+		/* Simple 32-bit address.  */
+		srp[0] = addr & 0xFFFF;
+		srp[1] = (addr >> 16);
+		break;
+
+	case FLAT_V850_R_HI16S_LO16:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the 2nd word of the 32-bit instruction
+		   following that, respectively.  The low half is _signed_
+		   so we must carry its sign bit to the upper half before
+		   writing the upper half.  */
+		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
+		srp[2] = addr & 0xFFFF;
+		break;
+
+	case FLAT_V850_R_HI16S_LO15:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the upper 15 bits of the 2nd word of the
+		   32-bit instruction following that, respectively.  The
+		   low half is _signed_ so we must carry its sign bit to
+		   the upper half before writing the upper half.  The
+		   lowest bit we preserve from the existing instruction.  */
+		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
+		srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1);
+		break;
+	}
+}
+
+#endif /* __V850_FLAT_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
new file mode 100644
index 000000000000..d32f04504b13
--- /dev/null
+++ b/include/asm-v850/fpga85e2c.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
+ *	FPGA implementation of V850E2/NA85E2C
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_FPGA85E2C_H__
+#define __V850_FPGA85E2C_H__
+
+#include <asm/v850e2.h>
+#include <asm/clinkage.h>
+
+
+#define CPU_MODEL	"v850e2/fpga85e2c"
+#define CPU_MODEL_LONG	"NEC V850E2/NA85E2C"
+#define PLATFORM	"fpga85e2c"
+#define PLATFORM_LONG	"NA85E2C FPGA implementation"
+
+
+/* `external ram'.  */
+#define ERAM_ADDR		0
+#define ERAM_SIZE		0x00100000 /* 1MB */
+
+
+/* FPGA specific control registers.  */
+
+/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
+   to stop execution.  */
+#define FLGREG_ADDR(n)		(0xFFE80100 + 2*(n))
+#define FLGREG(n)		(*(volatile unsigned char *)FLGREG_ADDR (n))
+#define FLGREG_NUM		2
+
+#define CSDEV_ADDR(n)		(0xFFE80110 + 2*(n))
+#define CSDEV(n)		(*(volatile unsigned char *)CSDEV_ADDR (n))
+
+
+/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
+#define IRQ_RPU(n)		(60 + (n))
+#define IRQ_RPU_NUM		4
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		64
+
+
+/* General-purpose timer.  */
+/* control/status register (can only be read/written via bit insns) */
+#define RPU_GTMC_ADDR		0xFFFFFB00
+#define RPU_GTMC		(*(volatile unsigned char *)RPU_GTMC_ADDR)
+#define RPU_GTMC_CE_BIT		7 /* clock enable (control) */
+#define RPU_GTMC_OV_BIT		6 /* overflow (status) */
+#define RPU_GTMC_CLK_BIT	1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
+/* 32-bit count (8 least-significant bits are always zero).  */
+#define RPU_GTM_ADDR		0xFFFFFB28
+#define RPU_GTM			(*(volatile unsigned long *)RPU_GTMC_ADDR)
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET		ERAM_ADDR /* minimum allocatable address */
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+   using a load instruction relative to R0.  The FPGA implementation
+   actually has no on-chip RAM, so we use part of main ram just after the
+   interrupt vectors.  */
+#ifdef __ASSEMBLY__
+#define R0_RAM_ADDR		lo(C_SYMBOL_NAME(_r0_ram))
+#else
+extern char _r0_ram;
+#define R0_RAM_ADDR		((unsigned long)&_r0_ram);
+#endif
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			122 /* actually, 8.192ms ticks =~ 122.07 */
+#endif
+
+
+#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
new file mode 100644
index 000000000000..0c4bce753c7e
--- /dev/null
+++ b/include/asm-v850/gbus_int.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_GBUS_INT_H__
+#define __V850_GBUS_INT_H__
+
+
+/* The GBUS interrupt interface has 32 interrupts shared among 4
+   processor interrupts.  The 32 GBUS interrupts are divided into two
+   sets of 16 each, for allocating among control registers, etc (there
+   are two of each control register, with bits 0-15 controlling an
+   interrupt each).  */
+
+/* The GBUS interrupts themselves.  */
+#define IRQ_GBUS_INT(n)		(GBUS_INT_BASE_IRQ + (n))
+#define IRQ_GBUS_INT_NUM	32
+
+/* Control registers.  */
+#define GBUS_INT_STATUS_ADDR(w)	(GBUS_INT_BASE_ADDR + (w)*0x40)
+#define GBUS_INT_STATUS(w)	(*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
+#define GBUS_INT_CLEAR_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
+#define GBUS_INT_CLEAR(w)	(*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
+#define GBUS_INT_EDGE_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
+#define GBUS_INT_EDGE(w)	(*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
+#define GBUS_INT_POLARITY_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
+#define GBUS_INT_POLARITY(w)	(*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
+/* This allows enabling interrupt bits in word W for interrupt GINTn.  */
+#define GBUS_INT_ENABLE_ADDR(w, n) \
+   (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
+#define GBUS_INT_ENABLE(w, n)	(*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
+
+/* Mapping between kernel interrupt numbers and hardware control regs/bits.  */
+#define GBUS_INT_BITS_PER_WORD	16
+#define GBUS_INT_NUM_WORDS	(IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
+#define GBUS_INT_IRQ_WORD(irq)	(((irq) - GBUS_INT_BASE_IRQ) >> 4)
+#define GBUS_INT_IRQ_BIT(irq)	(((irq) - GBUS_INT_BASE_IRQ) & 0xF)
+#define GBUS_INT_IRQ_MASK(irq)	(1 << GBUS_INT_IRQ_BIT(irq))
+
+
+/* Possible priorities for GBUS interrupts.  */
+#define GBUS_INT_PRIORITY_HIGH		2
+#define GBUS_INT_PRIORITY_MEDIUM	4
+#define GBUS_INT_PRIORITY_LOW		6
+
+
+#ifndef __ASSEMBLY__
+
+/* Enable interrupt handling for interrupt IRQ.  */
+extern void gbus_int_enable_irq (unsigned irq);
+/* Disable interrupt handling for interrupt IRQ.  Note that any
+   interrupts received while disabled will be delivered once the
+   interrupt is enabled again, unless they are explicitly cleared using
+   `gbus_int_clear_pending_irq'.  */
+extern void gbus_int_disable_irq (unsigned irq);
+/* Return true if interrupt handling for interrupt IRQ is enabled.  */
+extern int gbus_int_irq_enabled (unsigned irq);
+/* Disable all GBUS irqs.  */
+extern void gbus_int_disable_irqs (void);
+/* Clear any pending interrupts for IRQ.  */
+extern void gbus_int_clear_pending_irq (unsigned irq);
+/* Return true if interrupt IRQ is pending (but disabled).  */
+extern int gbus_int_irq_pending (unsigned irq);
+
+
+struct gbus_int_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
+				     struct hw_interrupt_type *hw_irq_types);
+
+/* Initialize GBUS interrupts.  */
+extern void gbus_int_init_irqs (void);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_GBUS_INT_H__ */
diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h
new file mode 100644
index 000000000000..5dfca8047cbe
--- /dev/null
+++ b/include/asm-v850/hardirq.h
@@ -0,0 +1,25 @@
+#ifndef __V850_HARDIRQ_H__
+#define __V850_HARDIRQ_H__
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __V850_HARDIRQ_H__ */
diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h
new file mode 100644
index 000000000000..486fb49ceab6
--- /dev/null
+++ b/include/asm-v850/highres_timer.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-v850/highres_timer.h -- High resolution timing routines
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_HIGHRES_TIMER_H__
+#define __V850_HIGHRES_TIMER_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/time.h>
+#endif
+
+#include <asm/entry.h>
+
+
+/* Frequency of the `slow ticks' (one tick each time the fast-tick
+   counter overflows).  */
+#define HIGHRES_TIMER_SLOW_TICK_RATE	25
+
+/* Which timer in the V850E `Timer D' we use.  */
+#define HIGHRES_TIMER_TIMER_D_UNIT	3
+
+
+#ifndef __ASSEMBLY__
+
+extern void highres_timer_start (void), highres_timer_stop (void);
+extern void highres_timer_reset (void);
+extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks);
+extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
+					    struct timeval *tv);
+extern void highres_timer_read (struct timeval *tv);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_HIGHRES_TIMER_H__ */
diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h
new file mode 100644
index 000000000000..4bdc98edb9f8
--- /dev/null
+++ b/include/asm-v850/hw_irq.h
@@ -0,0 +1,8 @@
+#ifndef __V850_HW_IRQ_H__
+#define __V850_HW_IRQ_H__
+
+extern inline void hw_resend_irq (struct hw_interrupt_type *h, unsigned int i)
+{
+}
+
+#endif /* __V850_HW_IRQ_H__ */
diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h
new file mode 100644
index 000000000000..bb5efd1b4b7d
--- /dev/null
+++ b/include/asm-v850/io.h
@@ -0,0 +1,133 @@
+/*
+ * include/asm-v850/io.h -- Misc I/O operations
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_IO_H__
+#define __V850_IO_H__
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define readb(addr) \
+  ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+  ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+  ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+#define writeb(b, addr) \
+  (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b, addr) \
+  (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b, addr) \
+  (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define inb(addr)	readb (addr)
+#define inw(addr)	readw (addr)
+#define inl(addr)	readl (addr)
+#define outb(x, addr)	((void) writeb (x, addr))
+#define outw(x, addr)	((void) writew (x, addr))
+#define outl(x, addr)	((void) writel (x, addr))
+
+#define inb_p(port)		inb((port))
+#define outb_p(val, port)	outb((val), (port))
+#define inw_p(port)		inw((port))
+#define outw_p(val, port)	outw((val), (port))
+#define inl_p(port)		inl((port))
+#define outl_p(val, port)	outl((val), (port))
+
+static inline void insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *p = dst;
+	while (count--)
+		*p++ = inb (port);
+}
+static inline void insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *p = dst;
+	while (count--)
+		*p++ = inw (port);
+}
+static inline void insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned long *p = dst;
+	while (count--)
+		*p++ = inl (port);
+}
+
+static inline void
+outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *p = src;
+	while (count--)
+		outb (*p++, port);
+}
+static inline void
+outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *p = src;
+	while (count--)
+		outw (*p++, port);
+}
+static inline void
+outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned long *p = src;
+	while (count--)
+		outl (*p++, port);
+}
+
+#define iounmap(addr)				((void)0)
+#define ioremap(physaddr, size)			(physaddr)
+#define ioremap_nocache(physaddr, size)		(physaddr)
+#define ioremap_writethrough(physaddr, size)	(physaddr)
+#define ioremap_fullcache(physaddr, size)	(physaddr)
+
+#define mmiowb()
+
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#if 0
+/* This is really stupid; don't define it.  */
+#define page_to_bus(page)       page_to_phys (page)
+#endif
+
+/* Conversion between virtual and physical mappings.  */
+#define mm_ptov(addr)		((void *)__phys_to_virt (addr))
+#define mm_vtop(addr)		((unsigned long)__virt_to_phys (addr))
+#define phys_to_virt(addr)	((void *)__phys_to_virt (addr))
+#define virt_to_phys(addr)	((unsigned long)__virt_to_phys (addr))
+
+#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len)
+#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __V850_IO_H__ */
diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h
new file mode 100644
index 000000000000..1765df6c7b87
--- /dev/null
+++ b/include/asm-v850/ioctl.h
@@ -0,0 +1,80 @@
+/* $Id: ioctl.h,v 1.1 2002/09/28 14:58:41 gerg Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _V850_IOCTL_H
+#define _V850_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * I don't really have any idea about what this should look like, so
+ * for the time being, this is heavily based on the PC definitions.
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* __V850_IOCTL_H__ */
diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h
new file mode 100644
index 000000000000..05c0dc9ce1ea
--- /dev/null
+++ b/include/asm-v850/ioctls.h
@@ -0,0 +1,80 @@
+#ifndef __V850_IOCTLS_H__
+#define __V850_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __V850_IOCTLS_H__ */
diff --git a/include/asm-v850/ipc.h b/include/asm-v850/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/include/asm-v850/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h
new file mode 100644
index 000000000000..d8cbe9886d95
--- /dev/null
+++ b/include/asm-v850/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __V850E_IPCBUF_H__
+#define __V850E_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for v850e architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __V850E_IPCBUF_H__ */
diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h
new file mode 100644
index 000000000000..44431152b36d
--- /dev/null
+++ b/include/asm-v850/irq.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/irq.h -- Machine interrupt handling
+ *
+ *  Copyright (C) 2001,02,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_IRQ_H__
+#define __V850_IRQ_H__
+
+#include <asm/machdep.h>
+
+/* Default NUM_MACH_IRQS.  */
+#ifndef NUM_MACH_IRQS
+#define NUM_MACH_IRQS	NUM_CPU_IRQS
+#endif
+
+/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1.  */
+#define FIRST_NMI	NUM_MACH_IRQS
+#define IRQ_NMI(n)	(FIRST_NMI + (n))
+/* v850 processors have 3 non-maskable interrupts.  */
+#define NUM_NMIS	3
+
+/* Includes both maskable and non-maskable irqs.  */
+#define NR_IRQS		(NUM_MACH_IRQS + NUM_NMIS)
+
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs;
+struct hw_interrupt_type;
+struct irqaction;
+
+#define irq_canonicalize(irq)	(irq)
+
+/* Initialize irq handling for IRQs.
+   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
+   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
+extern void
+init_irq_handlers (int base_irq, int num, int interval,
+		   struct hw_interrupt_type *irq_type);
+
+typedef void (*irq_handler_t)(int irq, void *data, struct pt_regs *regs);
+
+/* Handle interrupt IRQ.  REGS are the registers at the time of ther
+   interrupt.  */
+extern unsigned int handle_irq (int irq, struct pt_regs *regs);
+
+
+/* Enable interrupt handling on an irq.  */
+extern void enable_irq(unsigned int irq);
+
+/* Disable an irq and wait for completion.  */
+extern void disable_irq (unsigned int irq);
+
+/* Disable an irq without waiting. */
+extern void disable_irq_nosync (unsigned int irq);
+
+extern int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __V850_IRQ_H__ */
diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h
new file mode 100644
index 000000000000..3288976b161f
--- /dev/null
+++ b/include/asm-v850/kmap_types.h
@@ -0,0 +1,19 @@
+#ifndef __V850_KMAP_TYPES_H__
+#define __V850_KMAP_TYPES_H__
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_TYPE_NR
+};
+
+#endif /* __V850_KMAP_TYPES_H__ */
diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-v850/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h
new file mode 100644
index 000000000000..705148abe276
--- /dev/null
+++ b/include/asm-v850/local.h
@@ -0,0 +1,6 @@
+#ifndef __V850_LOCAL_H__
+#define __V850_LOCAL_H__
+
+#include <asm-generic/local.h>
+
+#endif /* __V850_LOCAL_H__ */
diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h
new file mode 100644
index 000000000000..89e66473a176
--- /dev/null
+++ b/include/asm-v850/ma.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-v850/ma.h -- V850E/MA series of cpu chips
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MA_H__
+#define __V850_MA_H__
+
+/* The MA series uses the V850E cpu core.  */
+#include <asm/v850e.h>
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The amount
+   varies between chip models, but there's always at least 4K, and it
+   should always start at FFFFC000.  */
+#define R0_RAM_ADDR			0xFFFFC000
+
+
+/* MA series UART details.  */
+#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	ma_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void ma_uart_pre_configure (unsigned chan,
+				   unsigned cflags, unsigned baud);
+#endif
+
+
+/* MA series timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+
+/* MA series timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
+
+
+/* Port 0 */
+/* Direct I/O.  Bits 0-7 are pins P00-P07.  */
+#define MA_PORT0_IO_ADDR		0xFFFFF400
+#define MA_PORT0_IO			(*(volatile u8 *)MA_PORT0_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT0_PM_ADDR		0xFFFFF420
+#define MA_PORT0_PM			(*(volatile u8 *)MA_PORT0_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT0_PMC_ADDR		0xFFFFF440
+#define MA_PORT0_PMC			(*(volatile u8 *)MA_PORT0_PMC_ADDR)
+/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ).  */
+#define MA_PORT0_PFC_ADDR		0xFFFFF460
+#define MA_PORT0_PFC			(*(volatile u8 *)MA_PORT0_PFC_ADDR)
+
+/* Port 1 */
+/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
+#define MA_PORT1_IO_ADDR		0xFFFFF402
+#define MA_PORT1_IO			(*(volatile u8 *)MA_PORT1_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT1_PM_ADDR		0xFFFFF420
+#define MA_PORT1_PM			(*(volatile u8 *)MA_PORT1_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT1_PMC_ADDR		0xFFFFF442
+#define MA_PORT1_PMC			(*(volatile u8 *)MA_PORT1_PMC_ADDR)
+
+/* Port 4 */
+/* Direct I/O.  Bits 0-5 are pins P40-P45.  */
+#define MA_PORT4_IO_ADDR		0xFFFFF408
+#define MA_PORT4_IO			(*(volatile u8 *)MA_PORT4_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT4_PM_ADDR		0xFFFFF428
+#define MA_PORT4_PM			(*(volatile u8 *)MA_PORT4_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT4_PMC_ADDR		0xFFFFF448
+#define MA_PORT4_PMC			(*(volatile u8 *)MA_PORT4_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = CSI, 1 = UART).  */
+#define MA_PORT4_PFC_ADDR		0xFFFFF468
+#define MA_PORT4_PFC			(*(volatile u8 *)MA_PORT4_PFC_ADDR)
+
+
+#ifndef __ASSEMBLY__
+
+/* Initialize MA chip interrupts.  */
+extern void ma_init_irqs (void);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_MA_H__ */
diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h
new file mode 100644
index 000000000000..ede1f1de2b7a
--- /dev/null
+++ b/include/asm-v850/ma1.h
@@ -0,0 +1,50 @@
+/*
+ * include/asm-v850/ma1.h -- V850E/MA1 cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MA1_H__
+#define __V850_MA1_H__
+
+/* Inherit more generic details from MA series.  */
+#include <asm/ma.h>
+
+
+#define CPU_MODEL	"v850e/ma1"
+#define CPU_MODEL_LONG	"NEC V850E/MA1"
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTOV(n)	(n)	/* 0-3 */
+#define IRQ_INTOV_NUM	4
+#define IRQ_INTP(n)	(0x4  + (n)) /* Pnnn (pin) interrupts */
+#define IRQ_INTP_NUM	24
+#define IRQ_INTCMD(n)	(0x1c + (n)) /* interval timer interrupts 0-3 */
+#define IRQ_INTCMD_NUM	4
+#define IRQ_INTDMA(n)	(0x20 + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM	4
+#define IRQ_INTCSI(n)	(0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */
+#define IRQ_INTCSI_NUM	3
+#define IRQ_INTSER(n)	(0x25 + (n)*4) /* UART 0-2 reception error */
+#define IRQ_INTSER_NUM	3
+#define IRQ_INTSR(n)	(0x26 + (n)*4) /* UART 0-2 reception completion */
+#define IRQ_INTSR_NUM	3
+#define IRQ_INTST(n)	(0x27 + (n)*4) /* UART 0-2 transmission completion */
+#define IRQ_INTST_NUM	3
+
+#define NUM_CPU_IRQS	0x30
+
+
+/* The MA1 has a UART with 3 channels.  */
+#define V850E_UART_NUM_CHANNELS	3
+
+
+#endif /* __V850_MA1_H__ */
diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h
new file mode 100644
index 000000000000..98d8bf63970e
--- /dev/null
+++ b/include/asm-v850/machdep.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-v850/machdep.h -- Machine-dependent definitions
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MACHDEP_H__
+#define __V850_MACHDEP_H__
+
+#include <linux/config.h>
+
+/* chips */
+#ifdef CONFIG_V850E_MA1
+#include <asm/ma1.h>
+#endif
+#ifdef CONFIG_V850E_ME2
+#include <asm/me2.h>
+#endif
+#ifdef CONFIG_V850E_TEG
+#include <asm/teg.h>
+#endif
+
+/* These are both chips _and_ platforms, so put them in the middle... */
+#ifdef CONFIG_V850E2_ANNA
+#include <asm/anna.h>
+#endif
+#ifdef CONFIG_V850E_AS85EP1
+#include <asm/as85ep1.h>
+#endif
+
+/* platforms */
+#ifdef CONFIG_RTE_CB_MA1
+#include <asm/rte_ma1_cb.h>
+#endif
+#ifdef CONFIG_RTE_CB_ME2
+#include <asm/rte_me2_cb.h>
+#endif
+#ifdef CONFIG_RTE_CB_NB85E
+#include <asm/rte_nb85e_cb.h>
+#endif
+#ifdef CONFIG_V850E_SIM
+#include <asm/sim.h>
+#endif
+#ifdef CONFIG_V850E2_SIM85E2C
+#include <asm/sim85e2c.h>
+#endif
+#ifdef CONFIG_V850E2_SIM85E2S
+#include <asm/sim85e2s.h>
+#endif
+#ifdef CONFIG_V850E2_FPGA85E2C
+#include <asm/fpga85e2c.h>
+#endif
+
+#endif /* __V850_MACHDEP_H__ */
diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h
new file mode 100644
index 000000000000..37abf874832c
--- /dev/null
+++ b/include/asm-v850/macrology.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-v850/macrology.h -- Various useful CPP macros
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#define macrology_paste(arg1, arg2)	macrology_paste_1(arg1, arg2)
+#define macrology_paste_1(arg1, arg2)	arg1 ## arg2
+#define macrology_stringify(sym)	macrology_stringify_1(sym)
+#define macrology_stringify_1(sym)	#sym
diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
new file mode 100644
index 000000000000..ac7c9ce0bdc1
--- /dev/null
+++ b/include/asm-v850/me2.h
@@ -0,0 +1,182 @@
+/*
+ * include/asm-v850/me2.h -- V850E/ME2 cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ME2_H__
+#define __V850_ME2_H__
+
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL	"v850e/me2"
+#define CPU_MODEL_LONG	"NEC V850E/ME2"
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)       (n) /* Pnnn (pin) interrupts */
+#define IRQ_INTP_NUM      31
+#define IRQ_INTCMD(n)     (0x31 + (n)) /* interval timer interrupts 0-3 */
+#define IRQ_INTCMD_NUM    4
+#define IRQ_INTDMA(n)     (0x41 + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM    4
+#define IRQ_INTUBTIRE(n)  (0x49 + (n)*5)/* UARTB 0-1 reception error */
+#define IRQ_INTUBTIRE_NUM 2
+#define IRQ_INTUBTIR(n)   (0x4a + (n)*5) /* UARTB 0-1 reception complete */
+#define IRQ_INTUBTIR_NUM  2
+#define IRQ_INTUBTIT(n)   (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
+#define IRQ_INTUBTIT_NUM  2
+#define IRQ_INTUBTIF(n)   (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
+#define IRQ_INTUBTIF_NUM  2
+#define IRQ_INTUBTITO(n)  (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
+#define IRQ_INTUBTITO_NUM 2
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		0x59 /* V850E/ME2 */
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  */
+#define R0_RAM_ADDR			0xFFFFB000 /* V850E/ME2 */
+
+
+/* V850E/ME2 UARTB details.*/
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UARTB_BASE_FREQ		(CPU_CLOCK_FREQ / 4)
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	me2_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void me2_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud);
+#endif /* __ASSEMBLY__ */
+
+
+/* V850E/ME2 timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+
+/* V850E/ME2 timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		(CPU_CLOCK_FREQ / 2)
+
+
+/* Select iRAM mode.  */
+#define ME2_IRAMM_ADDR			0xFFFFF80A
+#define ME2_IRAMM			(*(volatile u8*)ME2_IRAMM_ADDR)
+
+
+/* Interrupt edge-detection configuration.  INTF(n) and INTR(n) are only
+   valid for n == 1, 2, or 5.  */
+#define ME2_INTF_ADDR(n)		(0xFFFFFC00 + (n) * 0x2)
+#define ME2_INTF(n)			(*(volatile u8*)ME2_INTF_ADDR(n))
+#define ME2_INTR_ADDR(n)		(0xFFFFFC20 + (n) * 0x2)
+#define ME2_INTR(n)			(*(volatile u8*)ME2_INTR_ADDR(n))
+#define ME2_INTFAL_ADDR			0xFFFFFC10
+#define ME2_INTFAL			(*(volatile u8*)ME2_INTFAL_ADDR)
+#define ME2_INTRAL_ADDR			0xFFFFFC30
+#define ME2_INTRAL			(*(volatile u8*)ME2_INTRAL_ADDR)
+#define ME2_INTFDH_ADDR			0xFFFFFC16
+#define ME2_INTFDH			(*(volatile u16*)ME2_INTFDH_ADDR)
+#define ME2_INTRDH_ADDR			0xFFFFFC36
+#define ME2_INTRDH			(*(volatile u16*)ME2_INTRDH_ADDR)
+#define ME2_SESC_ADDR(n)		(0xFFFFF609 + (n) * 0x10)
+#define ME2_SESC(n)			(*(volatile u8*)ME2_SESC_ADDR(n))
+#define ME2_SESA10_ADDR			0xFFFFF5AD
+#define ME2_SESA10			(*(volatile u8*)ME2_SESA10_ADDR)
+#define ME2_SESA11_ADDR			0xFFFFF5DD
+#define ME2_SESA11			(*(volatile u8*)ME2_SESA11_ADDR)
+
+
+/* Port 1 */
+/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
+#define ME2_PORT1_IO_ADDR		0xFFFFF402
+#define ME2_PORT1_IO			(*(volatile u8 *)ME2_PORT1_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT1_PM_ADDR		0xFFFFF422
+#define ME2_PORT1_PM			(*(volatile u8 *)ME2_PORT1_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT1_PMC_ADDR		0xFFFFF442
+#define ME2_PORT1_PMC			(*(volatile u8 *)ME2_PORT1_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ).  */
+#define ME2_PORT1_PFC_ADDR		0xFFFFF462
+#define ME2_PORT1_PFC			(*(volatile u8 *)ME2_PORT1_PFC_ADDR)
+
+/* Port 2 */
+/* Direct I/O.  Bits 0-3 are pins P20-P25.  */
+#define ME2_PORT2_IO_ADDR		0xFFFFF404
+#define ME2_PORT2_IO			(*(volatile u8 *)ME2_PORT2_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT2_PM_ADDR		0xFFFFF424
+#define ME2_PORT2_PM			(*(volatile u8 *)ME2_PORT2_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT2_PMC_ADDR		0xFFFFF444
+#define ME2_PORT2_PMC			(*(volatile u8 *)ME2_PORT2_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ).  */
+#define ME2_PORT2_PFC_ADDR		0xFFFFF464
+#define ME2_PORT2_PFC			(*(volatile u8 *)ME2_PORT2_PFC_ADDR)
+
+/* Port 5 */
+/* Direct I/O.  Bits 0-5 are pins P50-P55.  */
+#define ME2_PORT5_IO_ADDR		0xFFFFF40A
+#define ME2_PORT5_IO			(*(volatile u8 *)ME2_PORT5_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT5_PM_ADDR		0xFFFFF42A
+#define ME2_PORT5_PM			(*(volatile u8 *)ME2_PORT5_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT5_PMC_ADDR		0xFFFFF44A
+#define ME2_PORT5_PMC			(*(volatile u8 *)ME2_PORT5_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT5_PFC_ADDR		0xFFFFF46A
+#define ME2_PORT5_PFC			(*(volatile u8 *)ME2_PORT5_PFC_ADDR)
+
+/* Port 6 */
+/* Direct I/O.  Bits 5-7 are pins P65-P67.  */
+#define ME2_PORT6_IO_ADDR		0xFFFFF40C
+#define ME2_PORT6_IO			(*(volatile u8 *)ME2_PORT6_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT6_PM_ADDR		0xFFFFF42C
+#define ME2_PORT6_PM			(*(volatile u8 *)ME2_PORT6_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT6_PMC_ADDR		0xFFFFF44C
+#define ME2_PORT6_PMC			(*(volatile u8 *)ME2_PORT6_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT6_PFC_ADDR		0xFFFFF46C
+#define ME2_PORT6_PFC			(*(volatile u8 *)ME2_PORT6_PFC_ADDR)
+
+/* Port 7 */
+/* Direct I/O.  Bits 2-7 are pins P72-P77.  */
+#define ME2_PORT7_IO_ADDR		0xFFFFF40E
+#define ME2_PORT7_IO			(*(volatile u8 *)ME2_PORT7_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT7_PM_ADDR		0xFFFFF42E
+#define ME2_PORT7_PM			(*(volatile u8 *)ME2_PORT7_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT7_PMC_ADDR		0xFFFFF44E
+#define ME2_PORT7_PMC			(*(volatile u8 *)ME2_PORT7_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT7_PFC_ADDR		0xFFFFF46E
+#define ME2_PORT7_PFC			(*(volatile u8 *)ME2_PORT7_PFC_ADDR)
+
+
+#ifndef __ASSEMBLY__
+/* Initialize V850E/ME2 chip interrupts.  */
+extern void me2_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_ME2_H__ */
diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h
new file mode 100644
index 000000000000..e2b90081b56f
--- /dev/null
+++ b/include/asm-v850/mman.h
@@ -0,0 +1,40 @@
+#ifndef __V850_MMAN_H__
+#define __V850_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __V850_MMAN_H__ */
diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h
new file mode 100644
index 000000000000..e30a52becfd6
--- /dev/null
+++ b/include/asm-v850/mmu.h
@@ -0,0 +1,22 @@
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+#ifndef __V850_MMU_H__
+#define __V850_MMU_H__
+
+struct mm_rblock_struct {
+	int		size;
+	int		refcount;
+	void	*kblock;
+};
+
+struct mm_tblock_struct {
+	struct mm_rblock_struct	*rblock;
+	struct mm_tblock_struct	*next;
+};
+
+typedef struct {
+	struct mm_tblock_struct	tblock;
+	unsigned long			end_brk;
+} mm_context_t;
+
+#endif /* __V850_MMU_H__ */
diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h
new file mode 100644
index 000000000000..f521c8050d3c
--- /dev/null
+++ b/include/asm-v850/mmu_context.h
@@ -0,0 +1,11 @@
+#ifndef __V850_MMU_CONTEXT_H__
+#define __V850_MMU_CONTEXT_H__
+
+#define destroy_context(mm)		((void)0)
+#define init_new_context(tsk,mm)	0
+#define switch_mm(prev,next,tsk)	((void)0)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define activate_mm(prev,next)		((void)0)
+#define enter_lazy_tlb(mm,tsk)		((void)0)
+
+#endif /* __V850_MMU_CONTEXT_H__ */
diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h
new file mode 100644
index 000000000000..2c2f4944f09f
--- /dev/null
+++ b/include/asm-v850/module.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-v850/module.h -- Architecture-specific module hooks
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 2001,03  Rusty Russell
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ *
+ * Derived in part from include/asm-ppc/module.h
+ */
+
+#ifndef __V850_MODULE_H__
+#define __V850_MODULE_H__
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+struct v850_plt_entry
+{
+	/* Indirect jump instruction sequence (6-byte mov + 2-byte jr).  */
+	unsigned long tramp[2];
+};
+
+struct mod_arch_specific
+{
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section, init_plt_section;
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/* Make empty sections for module_frob_arch_sections to expand. */
+#ifdef MODULE
+asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#endif
+
+/* We don't do exception tables.  */
+struct exception_table_entry;
+static inline const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+	       const struct exception_table_entry *last,
+	       unsigned long value)
+{
+	return 0;
+}
+#define ARCH_HAS_SEARCH_EXTABLE
+static inline void
+sort_extable(struct exception_table_entry *start,
+	     struct exception_table_entry *finish)
+{
+	/* nada */
+}
+#define ARCH_HAS_SORT_EXTABLE
+
+#endif /* __V850_MODULE_H__ */
diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h
new file mode 100644
index 000000000000..ed07dbd01637
--- /dev/null
+++ b/include/asm-v850/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __V850_MSGBUF_H__
+#define __V850_MSGBUF_H__
+
+/* 
+ * The msqid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __V850_MSGBUF_H__ */
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
new file mode 100644
index 000000000000..ee8339b23843
--- /dev/null
+++ b/include/asm-v850/namei.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-v850/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __V850_NAMEI_H__
+#define __V850_NAMEI_H__
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
new file mode 100644
index 000000000000..06085b0c043e
--- /dev/null
+++ b/include/asm-v850/page.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-v850/page.h -- VM ops
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PAGE_H__
+#define __V850_PAGE_H__
+
+#include <asm/machdep.h>
+
+
+#define PAGE_SHIFT	12
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. For archs with
+ * no MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET  0x0000000
+#endif
+
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define STRICT_MM_TYPECHECKS
+
+#define clear_page(page)	memset ((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)	memcpy ((void *)(to), (void *)from, PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		flush_dcache_page(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		flush_dcache_page(page);	\
+	} while (0)
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order (unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* No current v850 processor has virtual memory.  */
+#define __virt_to_phys(addr)	(addr)
+#define __phys_to_virt(addr)	(addr)
+
+#define virt_to_pfn(kaddr)	(__virt_to_phys (kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__phys_to_virt ((pfn) << PAGE_SHIFT)
+
+#define MAP_NR(kaddr) \
+  (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)
+#define virt_to_page(kaddr)	(mem_map + MAP_NR (kaddr))
+#define page_to_virt(page) \
+  ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page (pfn_to_virt (pfn))
+#define page_to_pfn(page)	virt_to_pfn (page_to_virt (page))
+
+#define	virt_addr_valid(kaddr)						\
+  (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr)
+
+
+#define __pa(x)		     __virt_to_phys ((unsigned long)(x))
+#define __va(x)		     ((void *)__phys_to_virt ((unsigned long)(x)))
+
+
+#endif /* KERNEL */
+
+#endif /* __V850_PAGE_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
new file mode 100644
index 000000000000..8d796e4bff52
--- /dev/null
+++ b/include/asm-v850/param.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-v850/param.h -- Varions kernel parameters
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PARAM_H__
+#define __V850_PARAM_H__
+
+#include <asm/machdep.h>	/* For HZ */
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define USER_HZ	100
+# define CLOCKS_PER_SEC	USER_HZ
+#endif
+
+#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
new file mode 100644
index 000000000000..e41941447b49
--- /dev/null
+++ b/include/asm-v850/pci.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-v850/pci.h -- PCI support
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PCI_H__
+#define __V850_PCI_H__
+
+/* Get any platform-dependent definitions.  */
+#include <asm/machdep.h>
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/* Generic declarations.  */
+
+struct scatterlist;
+
+extern void pcibios_set_master (struct pci_dev *dev);
+
+/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
+   32-bit PCI bus mastering address to use is returned.  the device owns
+   this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is
+   performed.  */
+extern dma_addr_t
+pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir);
+
+/* Return to the CPU the PCI DMA memory block previously `granted' to
+   PDEV, at DMA_ADDR.  */
+extern void
+pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
+		  int dir);
+
+/* Make physical memory consistent for a single streaming mode DMA
+   translation after a transfer.
+
+   If you perform a pci_map_single() but wish to interrogate the
+   buffer using the cpu, yet do not wish to teardown the PCI dma
+   mapping, you must call this function before doing so.  At the next
+   point you give the PCI dma address back to the card, you must first
+   perform a pci_dma_sync_for_device, and then the device again owns
+   the buffer.  */
+extern void
+pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr, size_t size,
+		     int dir);
+
+extern void
+pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr, size_t size,
+		     int dir);
+
+
+/* Do multiple DMA mappings at once.  */
+extern int
+pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir);
+
+/* Unmap multiple DMA mappings at once.  */
+extern void
+pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,
+	      int dir);
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDR to the pci side dma address as well,
+   else DMA_ADDR is undefined.  */
+extern void *
+pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr);
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must be
+   the same as what as passed into pci_alloc_consistent.  References to
+   the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
+   this call are illegal.  */
+extern void
+pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
+		     dma_addr_t dma_addr);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h
new file mode 100644
index 000000000000..755ac6522b63
--- /dev/null
+++ b/include/asm-v850/percpu.h
@@ -0,0 +1,14 @@
+#ifndef __V850_PERCPU_H__
+#define __V850_PERCPU_H__
+
+#include <asm-generic/percpu.h>
+
+/* This is a stupid hack to satisfy some grotty implicit include-file
+   dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but
+   doesn't include the necessary headers to define it.  In the twisted
+   festering mess of includes this must all be resolved somehow on other
+   platforms, but I haven't the faintest idea how, and don't care; here will
+   do, even though doesn't actually make any sense.  */
+#include <asm/page.h>
+
+#endif /* __V850_PERCPU_H__ */
diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h
new file mode 100644
index 000000000000..b91eb2d02bfd
--- /dev/null
+++ b/include/asm-v850/pgalloc.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-v850/pgalloc.h
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PGALLOC_H__
+#define __V850_PGALLOC_H__
+
+#include <linux/mm.h>  /* some crap code expects this */
+
+/* ... and then, there was one.  */
+#define check_pgt_cache()	((void)0)
+
+#endif /* __V850_PGALLOC_H__ */
diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h
new file mode 100644
index 000000000000..76e380e481e9
--- /dev/null
+++ b/include/asm-v850/pgtable.h
@@ -0,0 +1,58 @@
+#ifndef __V850_PGTABLE_H__
+#define __V850_PGTABLE_H__
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+
+#define pgd_present(pgd)	(1) /* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)		((void)0)
+
+#define	pmd_offset(a, b)	((void *)0)
+
+#define kern_addr_valid(addr)	(1)
+
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+
+/* These mean nothing to !CONFIG_MMU.  */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc.  When CONFIG_MMU is not defined, this
+ * should never actually be used, so just define it to something that's
+ * will hopefully cause a bus error if it is.
+ */
+#define ZERO_PAGE(vaddr)	((void *)0x87654321)
+
+
+/* Some bogus code in procfs uses these; whatever.  */
+#define VMALLOC_START	0
+#define VMALLOC_END	(~0)
+
+
+extern void paging_init (void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define pgtable_cache_init()   ((void)0)
+
+
+extern unsigned int kobjsize(const void *objp);
+
+
+#endif /* __V850_PGTABLE_H__ */
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
new file mode 100644
index 000000000000..0369562c7e15
--- /dev/null
+++ b/include/asm-v850/poll.h
@@ -0,0 +1,23 @@
+#ifndef __V850_POLL_H__
+#define __V850_POLL_H__
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+#define POLLRDNORM	0x0040
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	0x0080
+#define POLLWRBAND	0x0100
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __V850_POLL_H__ */
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
new file mode 100644
index 000000000000..ccb7297a0edc
--- /dev/null
+++ b/include/asm-v850/posix_types.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-v850/posix_types.h -- Kernel versions of standard types
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_POSIX_TYPES_H__
+#define __V850_POSIX_TYPES_H__
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned long long __kernel_ino64_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+/* Some bogus code depends on this; we don't care.  */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+/* We used to include <asm/bitops.h> here, which seems the right thing, but
+   it caused nasty include-file definition order problems.  Removing the
+   include seems to work, so fingers crossed...  */
+
+#undef	__FD_SET
+#define __FD_SET(fd, fd_set) \
+  __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef __FD_CLR
+#define __FD_CLR(fd, fd_set) \
+  __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fd_set) \
+  __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ZERO
+#define __FD_ZERO(fd_set) \
+  memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h
new file mode 100644
index 000000000000..d41f925f5182
--- /dev/null
+++ b/include/asm-v850/processor.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-v850/processor.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PROCESSOR_H__
+#define __V850_PROCESSOR_H__
+
+#include <linux/config.h>
+#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
+#include <linux/thread_info.h>
+#endif
+
+#include <asm/ptrace.h>
+#include <asm/entry.h>
+
+/* Some code expects `segment' stuff to be defined here.  */
+#include <asm/segment.h>
+
+
+/*
+ * The only places this is used seem to be horrible bletcherous kludges,
+ * so we just define it to be as large as possible.
+ */
+#define TASK_SIZE	(0xFFFFFFFF)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.  We won't be using it.
+ */
+#define TASK_UNMAPPED_BASE	0
+
+
+#ifndef __ASSEMBLY__
+
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()	({ __label__ _l; _l: &&_l;})
+
+/* If you change this, you must change the associated assembly-languages
+   constants defined below, THREAD_*.  */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long  ksp;
+};
+
+#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack }
+
+
+/* Do necessary setup to start up a newly executed thread.  */
+extern inline void start_thread (struct pt_regs *regs,
+				 unsigned long pc, unsigned long usp)
+{
+	regs->pc = pc;
+	regs->gpr[GPR_SP] = usp;
+	regs->kernel_mode = 0;
+}
+
+/* Free all resources held by a thread. */
+extern inline void release_thread (struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Free current thread data structures etc.  */
+static inline void exit_thread (void)
+{
+}
+
+
+/* Return the registers saved during context-switch by the currently
+   not-running thread T.  Note that this only includes some registers!
+   See entry.S for details.  */
+#define thread_saved_regs(t) \
+   ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET))
+/* Return saved (kernel) PC of a blocked thread.  Actually, we return the
+   LP register, because the thread is actually blocked in switch_thread,
+   and we're interested in the PC it will _return_ to.  */
+#define thread_saved_pc(t)   (thread_saved_regs(t)->gpr[GPR_LP])
+
+
+unsigned long get_wchan (struct task_struct *p);
+
+
+/* Return some info about the user process TASK.  */
+#define task_tos(task)	((unsigned long)(task)->thread_info + THREAD_SIZE)
+#define task_regs(task) ((struct pt_regs *)task_tos (task) - 1)
+#define task_sp(task)	(task_regs (task)->gpr[GPR_SP])
+#define task_pc(task)	(task_regs (task)->pc)
+/* Grotty old names for some.  */
+#define KSTK_EIP(task)	task_pc (task)
+#define KSTK_ESP(task)	task_sp (task)
+
+
+#define cpu_relax()    ((void)0)
+
+
+#else /* __ASSEMBLY__ */
+
+#define THREAD_KSP	0
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_PROCESSOR_H__ */
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
new file mode 100644
index 000000000000..7bf72bb5078c
--- /dev/null
+++ b/include/asm-v850/ptrace.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-v850/ptrace.h -- Access to CPU registers
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PTRACE_H__
+#define __V850_PTRACE_H__
+
+
+/* v850 general purpose registers with special meanings.  */
+#define GPR_ZERO	0	/* constant zero */
+#define GPR_ASM		1	/* reserved for assembler */
+#define GPR_SP		3	/* stack pointer */
+#define GPR_GP		4	/* global data pointer */
+#define GPR_TP		5	/* `text pointer' */
+#define GPR_EP		30	/* `element pointer' */
+#define GPR_LP		31	/* link pointer (current return address) */
+
+/* These aren't official names, but they make some code more descriptive.  */
+#define GPR_ARG0	6
+#define GPR_ARG1	7
+#define GPR_ARG2	8
+#define GPR_ARG3	9
+#define GPR_RVAL0	10
+#define GPR_RVAL1	11
+#define GPR_RVAL	GPR_RVAL0
+
+#define NUM_GPRS	32
+
+/* v850 `system' registers.  */
+#define SR_EIPC		0
+#define SR_EIPSW	1
+#define SR_FEPC		2
+#define SR_FEPSW	3
+#define SR_ECR		4
+#define SR_PSW		5
+#define SR_CTPC		16
+#define SR_CTPSW	17
+#define SR_DBPC		18
+#define SR_DBPSW	19
+#define SR_CTBP		20
+#define SR_DIR		21
+#define SR_ASID		23
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long v850_reg_t;
+
+/* How processor state is stored on the stack during a syscall/signal.
+   If you change this structure, change the associated assembly-language
+   macros below too (PT_*)!  */
+struct pt_regs
+{
+	/* General purpose registers.  */
+	v850_reg_t gpr[NUM_GPRS];
+
+	v850_reg_t pc;		/* program counter */
+	v850_reg_t psw;		/* program status word */
+
+	/* Registers used by `callt' instruction:  */
+	v850_reg_t ctpc;	/* saved program counter */
+	v850_reg_t ctpsw;	/* saved psw */
+	v850_reg_t ctbp;	/* base pointer for callt table */
+
+	char kernel_mode;	/* 1 if in `kernel mode', 0 if user mode */
+};
+
+
+#define instruction_pointer(regs)	((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_mode(regs)			(!(regs)->kernel_mode)
+
+/* When a struct pt_regs is used to save user state for a system call in
+   the kernel, the system call is stored in the space for R0 (since it's
+   never used otherwise, R0 being a constant 0).  Non-system-calls
+   simply store 0 there.  */
+#define PT_REGS_SYSCALL(regs)		(regs)->gpr[0]
+#define PT_REGS_SET_SYSCALL(regs, val)	((regs)->gpr[0] = (val))
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* The number of bytes used to store each register.  */
+#define _PT_REG_SIZE	4
+
+/* Offset of a general purpose register in a stuct pt_regs.  */
+#define PT_GPR(num)	((num) * _PT_REG_SIZE)
+
+/* Offsets of various special registers & fields in a struct pt_regs.  */
+#define PT_PC		((NUM_GPRS + 0) * _PT_REG_SIZE)
+#define PT_PSW		((NUM_GPRS + 1) * _PT_REG_SIZE)
+#define PT_CTPC		((NUM_GPRS + 2) * _PT_REG_SIZE)
+#define PT_CTPSW	((NUM_GPRS + 3) * _PT_REG_SIZE)
+#define PT_CTBP		((NUM_GPRS + 4) * _PT_REG_SIZE)
+#define PT_KERNEL_MODE	((NUM_GPRS + 5) * _PT_REG_SIZE)
+
+/* Where the current syscall number is stashed; obviously only valid in
+   the kernel!  */
+#define PT_CUR_SYSCALL	PT_GPR(0)
+
+/* Size of struct pt_regs, including alignment.  */
+#define PT_SIZE		((NUM_GPRS + 6) * _PT_REG_SIZE)
+
+
+/* These are `magic' values for PTRACE_PEEKUSR that return info about where
+   a process is located in memory.  */
+#define PT_TEXT_ADDR	(PT_SIZE + 1)
+#define PT_TEXT_LEN	(PT_SIZE + 2)
+#define PT_DATA_ADDR	(PT_SIZE + 3)
+
+
+#endif /* __V850_PTRACE_H__ */
diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h
new file mode 100644
index 000000000000..4b9dcd44f8d1
--- /dev/null
+++ b/include/asm-v850/resource.h
@@ -0,0 +1,6 @@
+#ifndef __V850_RESOURCE_H__
+#define __V850_RESOURCE_H__
+
+#include <asm-generic/resource.h>
+
+#endif /* __V850_RESOURCE_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
new file mode 100644
index 000000000000..9f7f02cb0391
--- /dev/null
+++ b/include/asm-v850/rte_cb.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_CB_H__
+#define __V850_RTE_CB_H__
+
+
+/* The SRAM on the Mother-A motherboard.  */
+#define MB_A_SRAM_ADDR		GCS0_ADDR
+#define MB_A_SRAM_SIZE		0x00200000 /* 2MB */
+
+
+#ifdef CONFIG_RTE_GBUS_INT
+/* GBUS interrupt support.  */
+
+# include <asm/gbus_int.h>
+
+# define GBUS_INT_BASE_IRQ	NUM_RTE_CB_IRQS
+# define GBUS_INT_BASE_ADDR	(GCS2_ADDR + 0x00006000)
+
+/* Some specific interrupts.  */
+# define IRQ_MB_A_LAN		IRQ_GBUS_INT(10)
+# define IRQ_MB_A_PCI1(n)	(IRQ_GBUS_INT(16) + (n))
+# define IRQ_MB_A_PCI1_NUM	4
+# define IRQ_MB_A_PCI2(n)	(IRQ_GBUS_INT(20) + (n))
+# define IRQ_MB_A_PCI2_NUM	4
+# define IRQ_MB_A_EXT(n)	(IRQ_GBUS_INT(24) + (n))
+# define IRQ_MB_A_EXT_NUM	4
+# define IRQ_MB_A_USB_OC(n)	(IRQ_GBUS_INT(28) + (n))
+# define IRQ_MB_A_USB_OC_NUM	2
+# define IRQ_MB_A_PCMCIA_OC	IRQ_GBUS_INT(30)
+
+/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS.  */
+# define NUM_MACH_IRQS		(NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
+
+#else /* !CONFIG_RTE_GBUS_INT */
+
+# define NUM_MACH_IRQS		NUM_RTE_CB_IRQS
+
+#endif /* CONFIG_RTE_GBUS_INT */
+
+
+#ifdef CONFIG_RTE_MB_A_PCI
+/* Mother-A PCI bus support.  */
+
+# include <asm/rte_mb_a_pci.h>
+
+/* These are the base addresses used for allocating device address
+   space.  512K of the motherboard SRAM is in the same space, so we have
+   to be careful not to let it be allocated.  */
+# define PCIBIOS_MIN_MEM	(MB_A_PCI_MEM_ADDR + 0x80000)
+# define PCIBIOS_MIN_IO		MB_A_PCI_IO_ADDR
+
+/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
+   instead, perversely enough, this becomes always true! */
+# define pci_dma_supported(dev, mask)		1
+# define pci_dac_dma_supported(dev, mask)	0
+# define pcibios_assign_all_busses()		1
+
+#endif /* CONFIG_RTE_MB_A_PCI */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#ifndef __ASSEMBLY__
+extern void rte_cb_early_init (void);
+extern void rte_cb_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_RTE_CB_H__ */
diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h
new file mode 100644
index 000000000000..bd3162ab9844
--- /dev/null
+++ b/include/asm-v850/rte_ma1_cb.h
@@ -0,0 +1,128 @@
+/*
+ * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_MA1_CB_H__
+#define __V850_RTE_MA1_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/ma1-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/MA1-CB"
+
+#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
+
+/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
+   for its own purposes, so care must be taken.  Some address lines are
+   not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to
+   0x800000 (exclusive).  */
+#define SRAM_ADDR		0x00400000
+#define SRAM_SIZE		0x00100000 /* 1MB */
+
+/* 32MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x00800000
+#define SDRAM_SIZE		0x02000000 /* 32MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x05000000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00200000 /*   2MB */
+#define GCS1_ADDR		0x06000000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x07900000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00400000 /*   4MB */
+#define GCS5_ADDR		0x04000000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x01000000 /*   16MB */
+#define GCS6_ADDR		0x07980000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00000200 /*   512B */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		SRAM_ADDR
+
+
+/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011
+   pins on the CPU.  These are shared among the GBUS interrupts.  */
+#define IRQ_GINT(n)		IRQ_INTP(n)
+#define IRQ_GINT_NUM		4
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE		0
+
+#else /* !CONFIG_ROM_KERNEL */
+
+#ifdef CONFIG_RTE_CB_MULTI
+/* Using RAM kernel with ROM monitor for Multi debugger.  */
+
+/* The chip's real interrupt vectors are in ROM, but they jump to a
+   secondary interrupt vector table in RAM.  */
+#define INTV_BASE		0x004F8000
+
+/* Scratch memory used by the ROM monitor, which shouldn't be used by
+   linux (except for the alternate interrupt vector area, defined
+   above).  */
+#define MON_SCRATCH_ADDR	0x004F8000
+#define MON_SCRATCH_SIZE	0x00008000 /* 32KB */
+
+#else /* !CONFIG_RTE_CB_MULTI */
+/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
+   address 0.  */
+
+#define INTV_BASE		0
+
+#endif /* CONFIG_RTE_CB_MULTI */
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (two digits).  Write-only.  */
+#define LED_ADDR(n)		(0x07802000 + (n))
+#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS		2
+
+
+/* Override the basic MA uart pre-initialization so that we can
+   initialize extra stuff.  */
+#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/ma.h> */
+#define V850E_UART_PRE_CONFIGURE	rte_ma1_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_ma1_cb_uart_pre_configure (unsigned chan,
+					   unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
+
+/* CTS for UART channel 0 is pin P43 (bit 3 of port 4).  */
+#define V850E_UART_CTS(chan)	((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1)
+/* RTS for UART channel 0 is pin P42 (bit 2 of port 4).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 0) {						      \
+		   unsigned old = MA_PORT4_IO; 				      \
+		   if (val)						      \
+			   MA_PORT4_IO = old & ~0x4;			      \
+		   else							      \
+			   MA_PORT4_IO = old | 0x4;			      \
+	   }								      \
+   } while (0)
+
+
+#endif /* __V850_RTE_MA1_CB_H__ */
diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h
new file mode 100644
index 000000000000..41ac185ca9cd
--- /dev/null
+++ b/include/asm-v850/rte_mb_a_pci.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MB_A_PCI_H__
+#define __V850_MB_A_PCI_H__
+
+
+#define MB_A_PCI_MEM_ADDR	GCS5_ADDR
+#define MB_A_PCI_MEM_SIZE	(GCS5_SIZE / 2)
+#define MB_A_PCI_IO_ADDR	(GCS5_ADDR + MB_A_PCI_MEM_SIZE)
+#define MB_A_PCI_IO_SIZE	(GCS5_SIZE / 2)
+#define MB_A_PCI_REG_BASE_ADDR	GCS6_ADDR
+
+#define MB_A_PCI_PCICR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x4)
+#define MB_A_PCI_PCICR		(*(volatile u16 *)MB_A_PCI_PCICR_ADDR)
+#define MB_A_PCI_PCISR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x6)
+#define MB_A_PCI_PCISR		(*(volatile u16 *)MB_A_PCI_PCISR_ADDR)
+#define MB_A_PCI_PCILTR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xD)
+#define MB_A_PCI_PCILTR		(*(volatile u8 *)MB_A_PCI_PCILTR_ADDR)
+#define MB_A_PCI_PCIBAR0_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x10)
+#define MB_A_PCI_PCIBAR0	(*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR)
+#define MB_A_PCI_PCIBAR1_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x14)
+#define MB_A_PCI_PCIBAR1	(*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR)
+#define MB_A_PCI_PCIBAR2_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x18)
+#define MB_A_PCI_PCIBAR2	(*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR)
+#define MB_A_PCI_VENDOR_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2C)
+#define MB_A_PCI_VENDOR_ID	(*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR)
+#define MB_A_PCI_DEVICE_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2E)
+#define MB_A_PCI_DEVICE_ID	(*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR)
+#define MB_A_PCI_DMRR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x9C)
+#define MB_A_PCI_DMRR		(*(volatile u32 *)MB_A_PCI_DMRR_ADDR)
+#define MB_A_PCI_DMLBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA0)
+#define MB_A_PCI_DMLBAM		(*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR)
+#define MB_A_PCI_DMLBAI_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA4)
+#define MB_A_PCI_DMLBAI		(*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR)
+#define MB_A_PCI_PCIPBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA8)
+#define MB_A_PCI_PCIPBAM	(*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR)
+/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG'  */
+#define MB_A_PCI_DMCFGA_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xAC)
+#define MB_A_PCI_DMCFGA		(*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR)
+/* `PCI Permanent Configuration ID Register'  */
+#define MB_A_PCI_PCIHIDR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xF0)
+#define MB_A_PCI_PCIHIDR	(*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR)
+
+
+#endif /* __V850_MB_A_PCI_H__ */
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
new file mode 100644
index 000000000000..9922c85c85a8
--- /dev/null
+++ b/include/asm-v850/rte_me2_cb.h
@@ -0,0 +1,202 @@
+/*
+ * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_ME2_CB_H__
+#define __V850_RTE_ME2_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/me2-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/ME2-CB"
+
+#define CPU_CLOCK_FREQ		150000000 /* 150MHz */
+#define FIXED_BOGOMIPS		50
+
+/* 32MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x00800000
+#define SDRAM_SIZE		0x02000000 /* 32MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x04000000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00800000 /*   8MB */
+#define GCS1_ADDR		0x04800000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x07000000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00800000 /*   8MB */
+#define GCS5_ADDR		0x08000000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x02000000 /*   32MB */
+#define GCS6_ADDR		0x07800000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00800000 /*   8MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		SDRAM_ADDR
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE		0
+#define ROOT_FS_IMAGE_RW	0
+
+#else /* !CONFIG_ROM_KERNEL */
+/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
+   address 0.  */
+
+#define INTV_BASE		0
+#define ROOT_FS_IMAGE_RW	1
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (four digits).  */
+#define LED_ADDR(n)		(0x0FE02000 + (n))
+#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS		4
+
+
+/* On-board PIC.  */
+
+#define CB_PIC_BASE_ADDR 	0x0FE04000
+
+#define CB_PIC_INT0M_ADDR 	(CB_PIC_BASE_ADDR + 0x00)
+#define CB_PIC_INT0M      	(*(volatile u16 *)CB_PIC_INT0M_ADDR)
+#define CB_PIC_INT1M_ADDR 	(CB_PIC_BASE_ADDR + 0x10)
+#define CB_PIC_INT1M      	(*(volatile u16 *)CB_PIC_INT1M_ADDR)
+#define CB_PIC_INTR_ADDR  	(CB_PIC_BASE_ADDR + 0x20)
+#define CB_PIC_INTR       	(*(volatile u16 *)CB_PIC_INTR_ADDR)
+#define CB_PIC_INTEN_ADDR 	(CB_PIC_BASE_ADDR + 0x30)
+#define CB_PIC_INTEN      	(*(volatile u16 *)CB_PIC_INTEN_ADDR)
+
+#define CB_PIC_INT0EN        	0x0001
+#define CB_PIC_INT1EN        	0x0002
+#define CB_PIC_INT0SEL       	0x0080
+
+/* The PIC interrupts themselves.  */
+#define CB_PIC_BASE_IRQ		NUM_CPU_IRQS
+#define IRQ_CB_PIC_NUM		10
+
+/* Some specific CB_PIC interrupts. */
+#define IRQ_CB_EXTTM0		(CB_PIC_BASE_IRQ + 0)
+#define IRQ_CB_EXTSIO		(CB_PIC_BASE_IRQ + 1)
+#define IRQ_CB_TOVER		(CB_PIC_BASE_IRQ + 2)
+#define IRQ_CB_GINT0		(CB_PIC_BASE_IRQ + 3)
+#define IRQ_CB_USB		(CB_PIC_BASE_IRQ + 4)
+#define IRQ_CB_LANC		(CB_PIC_BASE_IRQ + 5)
+#define IRQ_CB_USB_VBUS_ON	(CB_PIC_BASE_IRQ + 6)
+#define IRQ_CB_USB_VBUS_OFF	(CB_PIC_BASE_IRQ + 7)
+#define IRQ_CB_EXTTM1		(CB_PIC_BASE_IRQ + 8)
+#define IRQ_CB_EXTTM2		(CB_PIC_BASE_IRQ + 9)
+
+/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
+   the INTP65 - INTP67 pins on the CPU.  These are shared among the GBUS
+   interrupts.  */
+#define IRQ_GINT(n)		IRQ_INTP((n) + 9)  /* 0 is unused! */
+#define IRQ_GINT_NUM		4		   /* 0 is unused! */
+
+/* The shared interrupt line from the PIC is connected to CPU pin INTP23.  */
+#define IRQ_CB_PIC		IRQ_INTP(4) /* P23 */
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		(NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
+
+
+#ifndef __ASSEMBLY__
+struct cb_pic_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Enable interrupt handling for interrupt IRQ.  */
+extern void cb_pic_enable_irq (unsigned irq);
+/* Disable interrupt handling for interrupt IRQ.  Note that any interrupts
+   received while disabled will be delivered once the interrupt is enabled
+   again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'.  */
+extern void cb_pic_disable_irq (unsigned irq);
+/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
+   terminated by an entry with the name field == 0).  */
+extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
+				   struct hw_interrupt_type *hw_irq_types);
+/* Initialize PIC interrupts.  */
+extern void cb_pic_init_irqs (void);
+#endif /* __ASSEMBLY__ */
+
+
+/* TL16C550C on board UART see also asm/serial.h */
+#define CB_UART_BASE    	0x0FE08000
+#define CB_UART_REG_GAP 	0x10
+#define CB_UART_CLOCK   	0x16000000
+
+/* CompactFlash setting */
+#define CB_CF_BASE     		0x0FE0C000
+#define CB_CF_CCR_ADDR 		(CB_CF_BASE+0x200)
+#define CB_CF_CCR      		(*(volatile u8 *)CB_CF_CCR_ADDR)
+#define CB_CF_REG0_ADDR		(CB_CF_BASE+0x1000)
+#define CB_CF_REG0     		(*(volatile u16 *)CB_CF_REG0_ADDR)
+#define CB_CF_STS0_ADDR		(CB_CF_BASE+0x1004)
+#define CB_CF_STS0     		(*(volatile u16 *)CB_CF_STS0_ADDR)
+#define CB_PCATA_BASE  		(CB_CF_BASE+0x800)
+#define CB_IDE_BASE    		(CB_CF_BASE+0x9F0)
+#define CB_IDE_CTRL    		(CB_CF_BASE+0xBF6)
+#define CB_IDE_REG_OFFS		0x1
+
+
+/* SMSC LAN91C111 setting */
+#if defined(CONFIG_SMC91111)
+#define CB_LANC_BASE 		0x0FE10300
+#define CONFIG_SMC16BITONLY
+#define ETH0_ADDR 		CB_LANC_BASE
+#define ETH0_IRQ 		IRQ_CB_LANC
+#endif /* CONFIG_SMC16BITONLY */
+
+
+#undef V850E_UART_PRE_CONFIGURE
+#define V850E_UART_PRE_CONFIGURE	rte_me2_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_me2_cb_uart_pre_configure (unsigned chan,
+					   unsigned cflags, unsigned baud);
+#endif /* __ASSEMBLY__ */
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
+
+/* CTS for UART channel 0 is pin P22 (bit 2 of port 2).  */
+#define V850E_UART_CTS(chan)	((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
+/* RTS for UART channel 0 is pin P21 (bit 1 of port 2).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 0) {						      \
+		   unsigned old = ME2_PORT2_IO; 			      \
+		   if (val)						      \
+			   ME2_PORT2_IO = old & ~0x2;			      \
+		   else							      \
+			   ME2_PORT2_IO = old | 0x2;			      \
+	   }								      \
+   } while (0)
+
+
+#ifndef __ASSEMBLY__
+extern void rte_me2_cb_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_RTE_ME2_CB_H__ */
diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h
new file mode 100644
index 000000000000..f56591cad90a
--- /dev/null
+++ b/include/asm-v850/rte_nb85e_cb.h
@@ -0,0 +1,111 @@
+/*
+ * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_NB85E_CB_H__
+#define __V850_RTE_NB85E_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/nb85e-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/NB85E-CB"
+
+#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
+
+/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
+   for its own purposes, so care must be taken.  */
+#define SRAM_ADDR		0x03C00000
+#define SRAM_SIZE		0x00100000 /* 1MB */
+
+/* 16MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x01000000
+#define SDRAM_SIZE		0x01000000 /* 16MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x00400000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00400000 /*   4MB */
+#define GCS1_ADDR		0x02000000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x03900000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00080000 /*   512KB */
+#define GCS3_ADDR		0x02800000 /* GCS3 - EXT-bus: memory space */
+#define GCS3_SIZE		0x00800000 /*   8MB */
+#define GCS4_ADDR		0x03A00000 /* GCS4 - EXT-bus: I/O space */
+#define GCS4_SIZE		0x00200000 /*   2MB */
+#define GCS5_ADDR		0x00800000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x00800000 /*   8MB */
+#define GCS6_ADDR		0x03980000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00010000 /*   64KB */
+
+
+/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12.
+   These are shared among the GBUS interrupts.  */
+#define IRQ_GINT(n)		(10 + (n))
+#define IRQ_GINT_NUM		3
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE	0
+
+#else /* !CONFIG_ROM_KERNEL */
+/* We're using the ROM monitor.  */
+
+/* The chip's real interrupt vectors are in ROM, but they jump to a
+   secondary interrupt vector table in RAM.  */
+#define INTV_BASE		0x03CF8000
+
+/* Scratch memory used by the ROM monitor, which shouldn't be used by
+   linux (except for the alternate interrupt vector area, defined
+   above).  */
+#define MON_SCRATCH_ADDR	0x03CE8000
+#define MON_SCRATCH_SIZE	0x00018000 /* 96KB */
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (two digits).  Write-only.  */
+#define LED_ADDR(n)	(0x03802000 + (n))
+#define LED(n)		(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS	4
+
+
+/* Override the basic TEG UART pre-initialization so that we can
+   initialize extra stuff.  */
+#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/teg.h> */
+#define V850E_UART_PRE_CONFIGURE	rte_nb85e_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_nb85e_cb_uart_pre_configure (unsigned chan,
+					     unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART. */
+
+/* CTS is pin P00.  */
+#define V850E_UART_CTS(chan)	(! (TEG_PORT0_IO & 0x1))
+/* RTS is pin P02.  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   unsigned old = TEG_PORT0_IO;					      \
+	   TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4);		      \
+   } while (0)
+
+
+#endif /* __V850_RTE_NB85E_CB_H__ */
diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
new file mode 100644
index 000000000000..af1cba69a526
--- /dev/null
+++ b/include/asm-v850/scatterlist.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/scatterlist.h
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SCATTERLIST_H__
+#define __V850_SCATTERLIST_H__
+
+struct scatterlist {
+	struct page	*page;
+	unsigned	offset;
+	dma_addr_t	dma_address;
+	unsigned	length;
+};
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#endif /* __V850_SCATTERLIST_H__ */
diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h
new file mode 100644
index 000000000000..e0238253a0d0
--- /dev/null
+++ b/include/asm-v850/sections.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SECTIONS_H__
+#define __V850_SECTIONS_H__
+
+#include <asm-generic/sections.h>
+
+#endif /* __V850_SECTIONS_H__ */
diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h
new file mode 100644
index 000000000000..5e2b15dcf3d9
--- /dev/null
+++ b/include/asm-v850/segment.h
@@ -0,0 +1,36 @@
+#ifndef __V850_SEGMENT_H__
+#define __V850_SEGMENT_H__
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;	/* domain register */
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define __KERNEL_CS	0x0
+#define __KERNEL_DS	0x0
+
+#define __USER_CS	0x1
+#define __USER_DS	0x1
+
+#define KERNEL_DS	__KERNEL_DS
+#define KERNEL_CS	__KERNEL_CS
+#define USER_DS		__USER_DS
+#define USER_CS		__USER_CS
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(USER_DS)
+
+#define set_fs(seg)	((void)(seg))
+
+
+#define copy_segments(task, mm)	((void)((void)(task), (mm)))
+#define release_segments(mm)	((void)(mm))
+#define forget_segments()	((void)0)
+
+
+#endif /* __V850_SEGMENT_H__ */
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
new file mode 100644
index 000000000000..c514062bb69e
--- /dev/null
+++ b/include/asm-v850/semaphore.h
@@ -0,0 +1,88 @@
+#ifndef __V850_SEMAPHORE_H__
+#define __V850_SEMAPHORE_H__
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name,count)				      \
+	{ ATOMIC_INIT (count), 0,					      \
+	  __WAIT_QUEUE_HEAD_INITIALIZER ((name).wait) }
+
+#define __MUTEX_INITIALIZER(name)					      \
+	__SEMAPHORE_INITIALIZER (name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER (name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC (name,1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC (name,0)
+
+extern inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init (sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init (sem, 0);
+}
+
+/*
+ * special register calling convention
+ */
+asmlinkage void __down_failed (void);
+asmlinkage int  __down_interruptible_failed (void);
+asmlinkage int  __down_trylock_failed (void);
+asmlinkage void __up_wakeup (void);
+
+extern void __down (struct semaphore * sem);
+extern int  __down_interruptible (struct semaphore * sem);
+extern int  __down_trylock (struct semaphore * sem);
+extern void __up (struct semaphore * sem);
+
+extern inline void down (struct semaphore * sem)
+{
+	might_sleep();
+	if (atomic_dec_return (&sem->count) < 0)
+		__down (sem);
+}
+
+extern inline int down_interruptible (struct semaphore * sem)
+{
+	int ret = 0;
+	might_sleep();
+	if (atomic_dec_return (&sem->count) < 0)
+		ret = __down_interruptible (sem);
+	return ret;
+}
+
+extern inline int down_trylock (struct semaphore *sem)
+{
+	int ret = 0;
+	if (atomic_dec_return (&sem->count) < 0)
+		ret = __down_trylock (sem);
+	return ret;
+}
+
+extern inline void up (struct semaphore * sem)
+{
+	if (atomic_inc_return (&sem->count) <= 0)
+		__up (sem);
+}
+
+#endif /* __V850_SEMAPHORE_H__ */
diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h
new file mode 100644
index 000000000000..1622231a8b85
--- /dev/null
+++ b/include/asm-v850/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __V850_SEMBUF_H__
+#define __V850_SEMBUF_H__
+
+/* 
+ * The semid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __V850_SEMBUF_H__ */
diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h
new file mode 100644
index 000000000000..8c2a609ba2b0
--- /dev/null
+++ b/include/asm-v850/serial.h
@@ -0,0 +1,57 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */ 
+#include <linux/config.h>
+
+#ifdef CONFIG_RTE_CB_ME2
+
+#include <asm/rte_me2_cb.h>
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define irq_cannonicalize(x) (x)
+#define BASE_BAUD	250000	/* (16MHz / (16 * 38400)) * 9600 */
+#define SERIAL_PORT_DFNS \
+   { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS },
+
+/* Redefine UART register offsets.  */
+#undef UART_RX
+#undef UART_TX
+#undef UART_DLL
+#undef UART_TRG
+#undef UART_DLM
+#undef UART_IER
+#undef UART_FCTR
+#undef UART_IIR
+#undef UART_FCR
+#undef UART_EFR
+#undef UART_LCR
+#undef UART_MCR
+#undef UART_LSR
+#undef UART_MSR
+#undef UART_SCR
+#undef UART_EMSR
+
+#define UART_RX		(0 * CB_UART_REG_GAP)
+#define UART_TX		(0 * CB_UART_REG_GAP)
+#define UART_DLL	(0 * CB_UART_REG_GAP)
+#define UART_TRG	(0 * CB_UART_REG_GAP)
+#define UART_DLM	(1 * CB_UART_REG_GAP)
+#define UART_IER	(1 * CB_UART_REG_GAP)
+#define UART_FCTR	(1 * CB_UART_REG_GAP)
+#define UART_IIR	(2 * CB_UART_REG_GAP)
+#define UART_FCR	(2 * CB_UART_REG_GAP)
+#define UART_EFR	(2 * CB_UART_REG_GAP)
+#define UART_LCR	(3 * CB_UART_REG_GAP)
+#define UART_MCR	(4 * CB_UART_REG_GAP)
+#define UART_LSR	(5 * CB_UART_REG_GAP)
+#define UART_MSR	(6 * CB_UART_REG_GAP)
+#define UART_SCR	(7 * CB_UART_REG_GAP)
+#define UART_EMSR	(7 * CB_UART_REG_GAP)
+
+#endif /* CONFIG_RTE_CB_ME2 */
diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h
new file mode 100644
index 000000000000..c48a9b97d05b
--- /dev/null
+++ b/include/asm-v850/setup.h
@@ -0,0 +1,6 @@
+#ifndef _V850_SETUP_H
+#define _V850_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif /* __SETUP_H */
diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h
new file mode 100644
index 000000000000..3d085c9c418e
--- /dev/null
+++ b/include/asm-v850/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __V850_SHMBUF_H__
+#define __V850_SHMBUF_H__
+
+/* 
+ * The shmid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __V850_SHMBUF_H__ */
diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h
new file mode 100644
index 000000000000..7dcb6739073e
--- /dev/null
+++ b/include/asm-v850/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SHMPARAM_H__
+#define __V850_SHMPARAM_H__
+
+#define	SHMLBA		PAGE_SIZE	/* attach addr a multiple of this */
+
+#endif /* __V850_SHMPARAM_H__ */
diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h
new file mode 100644
index 000000000000..e0890f6f4bc9
--- /dev/null
+++ b/include/asm-v850/sigcontext.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/sigcontext.h -- Signal contexts
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIGCONTEXT_H__
+#define __V850_SIGCONTEXT_H__
+
+#include <asm/ptrace.h>
+
+struct sigcontext
+{
+	struct pt_regs 	regs;
+	unsigned long	oldmask;
+};
+
+#endif /* __V850_SIGCONTEXT_H__ */
diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h
new file mode 100644
index 000000000000..7eb94703dce0
--- /dev/null
+++ b/include/asm-v850/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SIGINFO_H__
+#define __V850_SIGINFO_H__
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __V850_SIGINFO_H__ */
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
new file mode 100644
index 000000000000..407db875899c
--- /dev/null
+++ b/include/asm-v850/signal.h
@@ -0,0 +1,195 @@
+#ifndef __V850_SIGNAL_H__
+#define __V850_SIGNAL_H__
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif /* __KERNEL__ */
+
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+
+#ifdef __KERNEL__
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_SIGNAL_H__ */
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
new file mode 100644
index 000000000000..10236abbe9be
--- /dev/null
+++ b/include/asm-v850/sim.h
@@ -0,0 +1,52 @@
+/*
+ * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM_H__
+#define __V850_SIM_H__
+
+
+#define CPU_ARCH		"v850e"
+#define CPU_MODEL		"v850e"
+#define CPU_MODEL_LONG		"NEC V850E"
+#define PLATFORM		"gdb/v850e"
+#define PLATFORM_LONG		"GDB V850E simulator"
+
+
+/* We use a weird value for RAM, not just 0, for testing purposes.
+   These must match the values used in the linker script.  */
+#define RAM_ADDR		0x8F000000
+#define RAM_SIZE		0x03000000
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		RAM_ADDR
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  On real
+   processors, this usually is on-chip RAM, but here we just
+   choose an arbitrary address that meets the above constraint.  */
+#define R0_RAM_ADDR		0xFFFFF000
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			24	/* Minimum supported frequency.  */
+#endif
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		6
+
+
+#endif /* __V850_SIM_H__ */
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
new file mode 100644
index 000000000000..17dd4fa318e6
--- /dev/null
+++ b/include/asm-v850/sim85e2.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-v850/sim85e2.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2_H__
+#define __V850_SIM85E2_H__
+
+
+#include <asm/v850e2.h>		/* Based on V850E2 core.  */
+
+
+/* Various memory areas supported by the simulator.
+   These should match the corresponding definitions in the linker script.  */
+
+/* `instruction RAM'; instruction fetches are much faster from IRAM than
+   from DRAM.  */
+#define IRAM_ADDR		0
+#define IRAM_SIZE		0x00100000 /* 1MB */
+/* `data RAM', below and contiguous with the I/O space.
+   Data fetches are much faster from DRAM than from IRAM.  */
+#define DRAM_ADDR		0xfff00000
+#define DRAM_SIZE		0x000ff000 /* 1020KB */
+/* `external ram'.  Unlike the above RAM areas, this memory is cached,
+   so both instruction and data fetches should be (mostly) fast --
+   however, currently only write-through caching is supported, so writes
+   to ERAM will be slow.  */
+#define ERAM_ADDR		0x00100000
+#define ERAM_SIZE		0x07f00000 /* 127MB (max) */
+/* Dynamic RAM; uses memory controller.  */
+#define SDRAM_ADDR		0x10000000
+#define SDRAM_SIZE		0x01000000 /* 16MB */
+
+
+/* Simulator specific control registers.  */
+/* NOTHAL controls whether the simulator will stop at a `halt' insn.  */
+#define SIM85E2_NOTHAL_ADDR	0xffffff22
+#define SIM85E2_NOTHAL		(*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
+/* The simulator will stop N cycles after N is written to SIMFIN.  */
+#define SIM85E2_SIMFIN_ADDR	0xffffff24
+#define SIM85E2_SIMFIN		(*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
+
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		64
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET		SDRAM_ADDR
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+   using a load instruction relative to R0.  The sim85e2 simulator
+   actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
+   choose a small portion at the end of that.  */
+#define R0_RAM_ADDR		0xFFFFE000
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			24	/* Minimum supported frequency.  */
+#endif
+
+
+#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h
new file mode 100644
index 000000000000..eee543ff3af8
--- /dev/null
+++ b/include/asm-v850/sim85e2c.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/sim85e2c.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2C_H__
+#define __V850_SIM85E2C_H__
+
+/* Use generic sim85e2 settings, other than the various names.  */
+#include <asm/sim85e2.h>
+
+#define CPU_MODEL	"v850e2"
+#define CPU_MODEL_LONG	"NEC V850E2"
+#define PLATFORM	"sim85e2c"
+#define PLATFORM_LONG	"SIM85E2C V850E2 simulator"
+
+#endif /* __V850_SIM85E2C_H__ */
diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h
new file mode 100644
index 000000000000..ee066d5d3c51
--- /dev/null
+++ b/include/asm-v850/sim85e2s.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-v850/sim85e2s.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2S_H__
+#define __V850_SIM85E2S_H__
+
+#include <asm/sim85e2.h>	/* Use generic sim85e2 settings.  */
+#if 0
+#include <asm/v850e2_cache.h>	/* + cache */
+#endif
+
+#define CPU_MODEL	"v850e2"
+#define CPU_MODEL_LONG	"NEC V850E2"
+#define PLATFORM	"sim85e2s"
+#define PLATFORM_LONG	"SIM85E2S V850E2 simulator"
+
+#endif /* __V850_SIM85E2S_H__ */
diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h
new file mode 100644
index 000000000000..4a19d5ae9d17
--- /dev/null
+++ b/include/asm-v850/simsyscall.h
@@ -0,0 +1,99 @@
+/*
+ * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIMSYSCALL_H__
+#define __V850_SIMSYSCALL_H__
+
+#define V850_SIM_SYS_exit(a...)		V850_SIM_SYSCALL_1 (1	, ##a)
+#define V850_SIM_SYS_fork(a...)		V850_SIM_SYSCALL_0 (2	, ##a)
+#define V850_SIM_SYS_read(a...)		V850_SIM_SYSCALL_3 (3	, ##a)
+#define V850_SIM_SYS_write(a...)	V850_SIM_SYSCALL_3 (4	, ##a)
+#define V850_SIM_SYS_open(a...)		V850_SIM_SYSCALL_2 (5	, ##a)
+#define V850_SIM_SYS_close(a...)	V850_SIM_SYSCALL_1 (6	, ##a)
+#define V850_SIM_SYS_wait4(a...)	V850_SIM_SYSCALL_4 (7	, ##a)
+/* #define V850_SIM_SYS_creat(a...)	V850_SIM_SYSCALL_1 (8	, ##a) */
+/* #define V850_SIM_SYS_link(a...)	V850_SIM_SYSCALL_1 (9	, ##a) */
+/* #define V850_SIM_SYS_unlink(a...)	V850_SIM_SYSCALL_1 (10	, ##a) */
+#define V850_SIM_SYS_execv(a...)	V850_SIM_SYSCALL_2 (11	, ##a)
+/* #define V850_SIM_SYS_chdir(a...)	V850_SIM_SYSCALL_1 (12	, ##a) */
+/* #define V850_SIM_SYS_mknod(a...)	V850_SIM_SYSCALL_1 (14	, ##a) */
+#define V850_SIM_SYS_chmod(a...)	V850_SIM_SYSCALL_2 (15	, ##a)
+#define V850_SIM_SYS_chown(a...)	V850_SIM_SYSCALL_2 (16	, ##a)
+#define V850_SIM_SYS_lseek(a...)	V850_SIM_SYSCALL_3 (19	, ##a)
+/* #define V850_SIM_SYS_getpid(a...)	V850_SIM_SYSCALL_1 (20	, ##a) */
+/* #define V850_SIM_SYS_isatty(a...)	V850_SIM_SYSCALL_1 (21	, ##a) */
+/* #define V850_SIM_SYS_fstat(a...)	V850_SIM_SYSCALL_1 (22	, ##a) */
+#define V850_SIM_SYS_time(a...)		V850_SIM_SYSCALL_1 (23	, ##a)
+#define V850_SIM_SYS_poll(a...)		V850_SIM_SYSCALL_3 (24	, ##a)
+#define V850_SIM_SYS_stat(a...)		V850_SIM_SYSCALL_2 (38	, ##a)
+#define V850_SIM_SYS_pipe(a...)		V850_SIM_SYSCALL_1 (42	, ##a)
+#define V850_SIM_SYS_times(a...)	V850_SIM_SYSCALL_1 (43	, ##a)
+#define V850_SIM_SYS_execve(a...)	V850_SIM_SYSCALL_3 (59	, ##a)
+#define V850_SIM_SYS_gettimeofday(a...)	V850_SIM_SYSCALL_2 (116	, ##a)
+/* #define V850_SIM_SYS_utime(a...)	V850_SIM_SYSCALL_2 (201	, ##a) */
+/* #define V850_SIM_SYS_wait(a...)	V850_SIM_SYSCALL_1 (202	, ##a) */
+
+#define V850_SIM_SYS_make_raw(a...)	V850_SIM_SYSCALL_1 (1024 , ##a)
+
+
+#define V850_SIM_SYSCALL_0(_call)					      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call)				      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_1(_call, _arg0)				      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0)			      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1)				      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0), "r" (arg1)	      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2)			      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
+	register long arg2 __asm__ ("r9") = (long)_arg2;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+
+#define V850_SIM_SYSCALL(call, args...) \
+   V850_SIM_SYS_##call (args)
+
+#endif /* __V850_SIMSYSCALL_H__ */
diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h
new file mode 100644
index 000000000000..213b852af53e
--- /dev/null
+++ b/include/asm-v850/socket.h
@@ -0,0 +1,50 @@
+#ifndef __V850_SOCKET_H__
+#define __V850_SOCKET_H__
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* __V850_SOCKET_H__ */
diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h
new file mode 100644
index 000000000000..cf4874c2fd8a
--- /dev/null
+++ b/include/asm-v850/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __V850_SOCKIOS_H__
+#define __V850_SOCKIOS_H__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* __V850_SOCKIOS_H__ */
diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h
new file mode 100644
index 000000000000..c68c60d06e2f
--- /dev/null
+++ b/include/asm-v850/stat.h
@@ -0,0 +1,73 @@
+/*
+ * include/asm-v850/stat.h -- v850 stat structure
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_STAT_H__
+#define __V850_STAT_H__
+
+#include <asm/posix_types.h>
+
+struct stat {
+	unsigned int	st_dev;
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int 	st_uid;
+	unsigned int 	st_gid;
+	unsigned int	st_rdev;
+	long		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	__unused1;
+	unsigned long	st_mtime;
+	unsigned long	__unused2;
+	unsigned long	st_ctime;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+};
+
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned long	__unused1;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned long	__unused3;
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
+	unsigned long	__unused4; /* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long	__unused8;
+};
+
+#endif /* __V850_STAT_H__ */
diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h
new file mode 100644
index 000000000000..ea1596607f26
--- /dev/null
+++ b/include/asm-v850/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __V850_STATFS_H__
+#define __V850_STATFS_H__
+
+#include <asm-generic/statfs.h>
+
+#endif /* __V850_STATFS_H__ */
diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h
new file mode 100644
index 000000000000..478e234789d6
--- /dev/null
+++ b/include/asm-v850/string.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/string.h -- Architecture specific string routines
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_STRING_H__
+#define __V850_STRING_H__
+
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+extern void *memmove (void *, const void *, __kernel_size_t);
+
+#endif /* __V850_STRING_H__ */
diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h
new file mode 100644
index 000000000000..20f4c738c04e
--- /dev/null
+++ b/include/asm-v850/system.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/system.h -- Low-level interrupt/thread ops
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SYSTEM_H__
+#define __V850_SYSTEM_H__
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+
+#define prepare_to_switch()	do { } while (0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+struct thread_struct;
+extern void *switch_thread (struct thread_struct *last,
+			    struct thread_struct *next);
+#define switch_to(prev,next,last)					      \
+  do {									      \
+        if (prev != next) {						      \
+ 		(last) = switch_thread (&prev->thread, &next->thread);	      \
+	}								      \
+  } while (0)
+
+
+/* Enable/disable interrupts.  */
+#define local_irq_enable()	__asm__ __volatile__ ("ei")
+#define local_irq_disable()	__asm__ __volatile__ ("di")
+
+#define local_save_flags(flags) \
+  __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW))
+#define local_restore_flags(flags) \
+  __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW))
+
+/* For spinlocks etc */
+#define	local_irq_save(flags) \
+  do { local_save_flags (flags); local_irq_disable (); } while (0) 
+#define local_irq_restore(flags) \
+  local_restore_flags (flags);
+
+
+static inline int irqs_disabled (void)
+{
+	unsigned flags;
+	local_save_flags (flags);
+	return !!(flags & 0x20);
+}
+
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on v850...
+ */
+#define nop()			__asm__ __volatile__ ("nop")
+#define mb()			__asm__ __volatile__ ("" ::: "memory")
+#define rmb()			mb ()
+#define wmb()			mb ()
+#define read_barrier_depends()	((void)0)
+#define set_rmb(var, value)	do { xchg (&var, value); } while (0)
+#define set_mb(var, value)	set_rmb (var, value)
+#define set_wmb(var, value)	do { var = value; wmb (); } while (0)
+
+#define smp_mb()	mb ()
+#define smp_rmb()	rmb ()
+#define smp_wmb()	wmb ()
+#define smp_read_barrier_depends()	read_barrier_depends()
+
+#define xchg(ptr, with) \
+  ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
+#define tas(ptr) (xchg ((ptr), 1))
+
+extern inline unsigned long __xchg (unsigned long with,
+				    __volatile__ void *ptr, int size)
+{
+	unsigned long tmp, flags;
+
+	local_irq_save (flags);
+
+	switch (size) {
+	case 1:
+		tmp = *(unsigned char *)ptr;
+		*(unsigned char *)ptr = with;
+		break;
+	case 2:
+		tmp = *(unsigned short *)ptr;
+		*(unsigned short *)ptr = with;
+		break;
+	case 4:
+		tmp = *(unsigned long *)ptr;
+		*(unsigned long *)ptr = with;
+		break;
+	}
+
+	local_irq_restore (flags);
+
+	return tmp;
+}
+
+#define arch_align_stack(x) (x)
+
+#endif /* __V850_SYSTEM_H__ */
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
new file mode 100644
index 000000000000..acc8c7d95329
--- /dev/null
+++ b/include/asm-v850/teg.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-v850/teg.h -- NB85E-TEG cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TEG_H__
+#define __V850_TEG_H__
+
+
+/* The TEG uses the V850E cpu core.  */
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL	"v850e/nb85e-teg"
+#define CPU_MODEL_LONG	"NEC V850E/NB85E TEG"
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  On the NB85E/TEG,
+   There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
+   address to be addressable by a 16-bit signed offset, so we only use the
+   second half of it starting from 0xFFFF8000.  */
+#define R0_RAM_ADDR			0xFFFF8000
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
+   Some of these are parameterized even though there's only a single
+   interrupt, for compatibility with some generic code that works on other
+   processor models.  */
+#define IRQ_INTCMD(n)	6	/* interval timer interrupt */
+#define IRQ_INTCMD_NUM	1
+#define IRQ_INTSER(n)	16	/* UART reception error */
+#define IRQ_INTSER_NUM	1
+#define IRQ_INTSR(n)	17	/* UART reception completion */
+#define IRQ_INTSR_NUM	1
+#define IRQ_INTST(n)	18	/* UART transmission completion */
+#define IRQ_INTST_NUM	1
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS	64
+
+
+/* TEG UART details.  */
+#define V850E_UART_BASE_ADDR(n)		(0xFFFFF600 + 0x10 * (n))
+#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
+#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
+#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
+#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
+#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x8)
+#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xA)
+#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xC)
+#define V850E_UART_NUM_CHANNELS		1
+#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	teg_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void teg_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud);
+#endif
+
+
+/* The TEG RTPU.  */
+#define V850E_RTPU_BASE_ADDR		0xFFFFF210
+
+
+/* TEG series timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF210
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x8)
+#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
+
+
+/* `Interrupt Source Select' control register.  */
+#define TEG_ISS_ADDR			0xFFFFF7FA
+#define TEG_ISS				(*(volatile u8 *)TEG_ISS_ADDR)
+
+/* Port 0 I/O register (bits 0-3 used).  */
+#define TEG_PORT0_IO_ADDR		0xFFFFF7F2
+#define TEG_PORT0_IO			(*(volatile u8 *)TEG_PORT0_IO_ADDR)
+/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input).  */
+#define TEG_PORT0_PM_ADDR		0xFFFFF7F4
+#define TEG_PORT0_PM			(*(volatile u8 *)TEG_PORT0_PM_ADDR)
+
+
+#ifndef __ASSEMBLY__
+extern void teg_init_irqs (void);
+#endif
+
+
+#endif /* __V850_TEG_H__ */
diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h
new file mode 100644
index 000000000000..212d4e279263
--- /dev/null
+++ b/include/asm-v850/termbits.h
@@ -0,0 +1,175 @@
+#ifndef __V850_TERMBITS_H__
+#define __V850_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __V850_TERMBITS_H__ */
diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h
new file mode 100644
index 000000000000..79e97b59806e
--- /dev/null
+++ b/include/asm-v850/termios.h
@@ -0,0 +1,106 @@
+#ifndef __V850_TERMIOS_H__
+#define __V850_TERMIOS_H__
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __V850_TERMIOS_H__ */
diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h
new file mode 100644
index 000000000000..e2ef44593752
--- /dev/null
+++ b/include/asm-v850/thread_info.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-v850/thread_info.h -- v850 low-level thread information
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *    - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file was derived from the PPC version, include/asm-ppc/thread_info.h
+ * which was adapted from the i386 version by Paul Mackerras
+ */
+
+#ifndef __V850_THREAD_INFO_H__
+#define __V850_THREAD_INFO_H__
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						      \
+{									      \
+	.task =		&tsk,						      \
+	.exec_domain =	&default_exec_domain,				      \
+	.flags =	0,						      \
+	.cpu =		0,						      \
+	.preempt_count = 1,						      \
+	.restart_block = {						      \
+		.fn = do_no_restart_syscall,				      \
+	},								      \
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+				__get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PREEMPT	16
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		5
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+
+/* Size of kernel stack for each process.  */
+#define THREAD_SIZE		0x2000
+
+/* The alignment of kernel threads, with thread_info structures at their
+   base.  Thus, a pointer for a task's task structure can be derived from
+   its kernel stack pointer.  */
+#define THREAD_ALIGNMENT	THREAD_SIZE
+#define THREAD_MASK		(-THREAD_ALIGNMENT)
+
+
+#ifdef __ASSEMBLY__
+
+/* Put a pointer to the current thread_info structure into REG.  Note that
+   this definition requires THREAD_MASK to be representable as a signed
+   16-bit value.  */
+#define GET_CURRENT_THREAD(reg)						\
+        /* Use `addi' and then `and' instead of just `andi', because	\
+	   `addi' sign-extends the immediate value, whereas `andi'	\
+	   zero-extends it.  */						\
+	addi	THREAD_MASK, r0, reg;					\
+	and	sp, reg
+
+#else
+
+/* Return a pointer to the current thread_info structure.  */
+static inline struct thread_info *current_thread_info (void)
+{
+	register unsigned long sp __asm__ ("sp");
+	return (struct thread_info *)(sp & THREAD_MASK);
+}
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_THREAD_INFO_H__ */
diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h
new file mode 100644
index 000000000000..6279e5a0ee8e
--- /dev/null
+++ b/include/asm-v850/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-v850/timex.h
+ *
+ * v850 architecture timex specifications
+ */
+#ifndef __V850_TIMEX_H__
+#define __V850_TIMEX_H__
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif /* __V850_TIMEX_H__ */
diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h
new file mode 100644
index 000000000000..73bc9ead40dd
--- /dev/null
+++ b/include/asm-v850/tlb.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-v850/tlb.h
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TLB_H__
+#define __V850_TLB_H__
+
+#define tlb_flush(tlb)	((void)0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __V850_TLB_H__ */
diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h
new file mode 100644
index 000000000000..501e4498172c
--- /dev/null
+++ b/include/asm-v850/tlbflush.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-v850/tlbflush.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TLBFLUSH_H__
+#define __V850_TLBFLUSH_H__
+
+#include <asm/machdep.h>
+
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG ();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG ();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	BUG ();
+}
+
+extern inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG ();
+}
+
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	BUG ();
+}
+
+#endif /* __V850_TLBFLUSH_H__ */
diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h
new file mode 100644
index 000000000000..6040e41d7945
--- /dev/null
+++ b/include/asm-v850/topology.h
@@ -0,0 +1,6 @@
+#ifndef __V850_TOPOLOGY_H__
+#define __V850_TOPOLOGY_H__
+
+#include <asm-generic/topology.h>
+
+#endif /* __V850_TOPOLOGY_H__ */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
new file mode 100644
index 000000000000..e7cfe5b33a10
--- /dev/null
+++ b/include/asm-v850/types.h
@@ -0,0 +1,68 @@
+#ifndef __V850_TYPES_H__
+#define __V850_TYPES_H__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_TYPES_H__ */
diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h
new file mode 100644
index 000000000000..4386cfc6a8dd
--- /dev/null
+++ b/include/asm-v850/uaccess.h
@@ -0,0 +1,165 @@
+#ifndef __V850_UACCESS_H__
+#define __V850_UACCESS_H__
+
+/*
+ * User space memory access functions
+ */
+
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+#include <asm/machdep.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+extern inline int access_ok (int type, const void *addr, unsigned long size)
+{
+	/* XXX I guess we should check against real ram bounds at least, and
+	   possibly make sure ADDR is not within the kernel.
+	   For now we just check to make sure it's not a small positive
+	   or negative value, as that will at least catch some kinds of
+	   error.  In particular, we make sure that ADDR's not within the
+	   interrupt vector area, which we know starts at zero, or within the
+	   peripheral-I/O area, which is located just _before_ zero.  */
+	unsigned long val = (unsigned long)addr;
+	return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000;
+}
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area (int type, const void *addr, unsigned long size)
+{
+	return access_ok (type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table (unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+extern int bad_user_access_length (void);
+
+#define __get_user(var, ptr)						      \
+  ({									      \
+	  int __gu_err = 0;						      \
+	  typeof(*(ptr)) __gu_val = 0;					      \
+	  switch (sizeof (*(ptr))) {					      \
+	  case 1:							      \
+	  case 2:							      \
+	  case 4:							      \
+		  __gu_val = *(ptr);					      \
+		  break;						      \
+	  case 8:							      \
+		  memcpy(&__gu_val, ptr, sizeof(__gu_val));		      \
+		  break;						      \
+	  default:							      \
+		  __gu_val = 0;						      \
+		  __gu_err = __get_user_bad ();				      \
+		  break;						      \
+	  }								      \
+	  (var) = __gu_val;						      \
+	  __gu_err;							      \
+  })
+#define __get_user_bad()	(bad_user_access_length (), (-EFAULT))
+
+#define __put_user(var, ptr)						      \
+  ({									      \
+	  int __pu_err = 0;						      \
+	  switch (sizeof (*(ptr))) {					      \
+	  case 1:							      \
+	  case 2:							      \
+	  case 4:							      \
+		  *(ptr) = (var);					      \
+		  break;						      \
+	  case 8: {							      \
+	  	  typeof(*(ptr)) __pu_val = 0;				      \
+		  memcpy(ptr, &__pu_val, sizeof(__pu_val));		      \
+		  }							      \
+		  break;						      \
+	  default:							      \
+		  __pu_err = __put_user_bad ();				      \
+		  break;						      \
+	  }								      \
+	  __pu_err;							      \
+  })
+#define __put_user_bad()	(bad_user_access_length (), (-EFAULT))
+
+#define put_user(x, ptr)	__put_user(x, ptr)
+#define get_user(x, ptr)	__get_user(x, ptr)
+
+#define __copy_from_user(to, from, n)	(memcpy (to, from, n), 0)
+#define __copy_to_user(to, from, n)	(memcpy(to, from, n), 0)
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_from_user(to, from, n)	__copy_from_user (to, from, n)
+#define copy_to_user(to, from, n) 	__copy_to_user(to, from, n)
+
+#define copy_to_user_ret(to,from,n,retval) \
+  ({ if (copy_to_user (to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) \
+  ({ if (copy_from_user (to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user (char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy (dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return tmp - dst;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user (const char *src, long n)
+{
+	return strlen (src) + 1;
+}
+
+#define strlen_user(str)	strnlen_user (str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user (void *to, unsigned long n)
+{
+	memset (to, 0, n);
+	return 0;
+}
+
+#endif /* __V850_UACCESS_H__ */
diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h
new file mode 100644
index 000000000000..303c21590cff
--- /dev/null
+++ b/include/asm-v850/ucontext.h
@@ -0,0 +1,14 @@
+#ifndef __V850_UCONTEXT_H__
+#define __V850_UCONTEXT_H__
+
+#include <asm/sigcontext.h>
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __V850_UCONTEXT_H__ */
diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h
new file mode 100644
index 000000000000..65e38362142b
--- /dev/null
+++ b/include/asm-v850/unaligned.h
@@ -0,0 +1,130 @@
+/*
+ * include/asm-v850/unaligned.h -- Unaligned memory access
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file is a copy of the arm version, include/asm-arm/unaligned.h
+ *
+ * Note that some v850 chips support unaligned access, but it seems too
+ * annoying to use.
+ */
+
+#ifndef __V850_UNALIGNED_H__
+#define __V850_UNALIGNED_H__
+
+#include <asm/types.h>
+
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file.  Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	3		7	3
+ *	8		20	6		16	6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	4		7	4
+ *	8		19	8		15	6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers).  Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2(__p)					\
+	(__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4(__p)					\
+	(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define get_unaligned(ptr)					\
+	({							\
+		__typeof__(*(ptr)) __v;				\
+		__u8 *__p = (__u8 *)(ptr);			\
+		switch (sizeof(*(ptr))) {			\
+		case 1:	__v = *(ptr);			break;	\
+		case 2: __v = __get_unaligned_2(__p);	break;	\
+		case 4: __v = __get_unaligned_4(__p);	break;	\
+		case 8: {					\
+				unsigned int __v1, __v2;	\
+				__v2 = __get_unaligned_4((__p+4)); \
+				__v1 = __get_unaligned_4(__p);	\
+				__v = ((unsigned long long)__v2 << 32 | __v1);	\
+			}					\
+			break;					\
+		default: __v = __bug_unaligned_x(__p);	break;	\
+		}						\
+		__v;						\
+	})
+
+
+extern inline void __put_unaligned_2(__u32 __v, register __u8 *__p)
+{
+	*__p++ = __v;
+	*__p++ = __v >> 8;
+}
+
+extern inline void __put_unaligned_4(__u32 __v, register __u8 *__p)
+{
+	__put_unaligned_2(__v >> 16, __p + 2);
+	__put_unaligned_2(__v, __p);
+}
+
+extern inline void __put_unaligned_8(const unsigned long long __v, register __u8 *__p)
+{
+	/*
+	 * tradeoff: 8 bytes of stack for all unaligned puts (2
+	 * instructions), or an extra register in the long long
+	 * case - go for the extra register.
+	 */
+	__put_unaligned_4(__v >> 32, __p+4);
+	__put_unaligned_4(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define put_unaligned(val,ptr)					\
+	({							\
+		switch (sizeof(*(ptr))) {			\
+		case 1:						\
+			*(ptr) = (val);				\
+			break;					\
+		case 2: __put_unaligned_2((val),(__u8 *)(ptr));	\
+			break;					\
+		case 4:	__put_unaligned_4((val),(__u8 *)(ptr));	\
+			break;					\
+		case 8:	__put_unaligned_8((val),(__u8 *)(ptr)); \
+			break;					\
+		default: __bug_unaligned_x(ptr);		\
+			break;					\
+		}						\
+		(void) 0;					\
+	})
+
+
+#endif /* __V850_UNALIGNED_H__ */
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
new file mode 100644
index 000000000000..3b552096c0e8
--- /dev/null
+++ b/include/asm-v850/unistd.h
@@ -0,0 +1,477 @@
+/*
+ * include/asm-v850/unistd.h -- System call numbers and invocation mechanism
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_UNISTD_H__
+#define __V850_UNISTD_H__
+
+#include <asm/clinkage.h>
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_setpgid		 57
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_ugetrlimit	 	 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_vhangup		111
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_fcntl64		198
+#define __NR_getdents64		199
+#define __NR_pivot_root		200
+#define __NR_gettid		201
+#define __NR_tkill		202
+
+
+/* Syscall protocol:
+   Syscall number in r12, args in r6-r9, r13-r14
+   Return value in r10
+   Trap 0 for `short' syscalls, where all the args can fit in function
+   call argument registers, and trap 1 when there are additional args in
+   r13-r14.  */
+
+#define SYSCALL_NUM	"r12"
+#define SYSCALL_ARG0	"r6"
+#define SYSCALL_ARG1	"r7"
+#define SYSCALL_ARG2	"r8"
+#define SYSCALL_ARG3	"r9"
+#define SYSCALL_ARG4	"r13"
+#define SYSCALL_ARG5	"r14"
+#define SYSCALL_RET	"r10"
+
+#define SYSCALL_SHORT_TRAP	"0"
+#define SYSCALL_LONG_TRAP	"1"
+
+/* Registers clobbered by any syscall.  This _doesn't_ include the syscall
+   number (r12) or the `extended arg' registers (r13, r14), even though
+   they are actually clobbered too (this is because gcc's `asm' statement
+   doesn't allow a clobber to be used as an input or output).  */
+#define SYSCALL_CLOBBERS	"r1", "r5", "r11", "r15", "r16", \
+				"r17", "r18", "r19"
+
+/* Registers clobbered by a `short' syscall.  This includes all clobbers
+   except the syscall number (r12).  */
+#define SYSCALL_SHORT_CLOBBERS	SYSCALL_CLOBBERS, "r13", "r14"
+
+
+/* User programs sometimes end up including this header file
+   (indirectly, via uClibc header files), so I'm a bit nervous just
+   including <linux/compiler.h>.  */
+#if !defined(__builtin_expect) && __GNUC__ == 2 && __GNUC_MINOR__ < 96
+#define __builtin_expect(x, expected_value) (x)
+#endif
+
+#define __syscall_return(type, res)					      \
+  do {									      \
+	  /* user-visible error numbers are in the range -1 - -124:	      \
+	     see <asm-v850/errno.h> */					      \
+	  if (__builtin_expect ((unsigned long)(res) >= (unsigned long)(-125), 0)) { \
+		  errno = -(res);					      \
+		  res = -1;						      \
+	  }								      \
+	  return (type) (res);						      \
+  } while (0)
+
+
+#define _syscall0(type, name)						      \
+type name (void)							      \
+{									      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)	 	      \
+			: "1" (__syscall)				      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall1(type, name, atype, a)					      \
+type name (atype a)							      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a)			      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall2(type, name, atype, a, btype, b)			      \
+type name (atype a, btype b)						      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a), "r" (__b)		      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall3(type, name, atype, a, btype, b, ctype, c)		      \
+type name (atype a, btype b, ctype c)					      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)    \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d)	      \
+type name (atype a, btype b, ctype c, dtype d)				      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall),				      \
+			"r" (__a), "r" (__b), "r" (__c), "r" (__d)	      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype,e)\
+type name (atype a, btype b, ctype c, dtype d, etype e)			      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register etype __e __asm__ (SYSCALL_ARG4) = e;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall), "=r" (__e)	      \
+			: "1" (__syscall),				      \
+			"r" (__a), "r" (__b), "r" (__c), "r" (__d), "2" (__e) \
+			: SYSCALL_CLOBBERS);				      \
+  __syscall_return (type, __ret);					      \
+}
+
+#if __GNUC__ < 3
+/* In older versions of gcc, `asm' statements with more than 10
+   input/output arguments produce a fatal error.  To work around this
+   problem, we use two versions, one for gcc-3.x and one for earlier
+   versions of gcc (the `earlier gcc' version doesn't work with gcc-3.x
+   because gcc-3.x doesn't allow clobbers to also be input arguments).  */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f)			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (ret), "=r" (syscall)			      \
+			: "1" (syscall),				      \
+			"r" (a), "r" (b), "r" (c), "r" (d),		      \
+ 			"r" (e), "r" (f)				      \
+			: SYSCALL_CLOBBERS, SYSCALL_ARG4, SYSCALL_ARG5);
+#else /* __GNUC__ >= 3 */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f)			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (ret), "=r" (syscall),			      \
+ 			"=r" (e), "=r" (f)				      \
+			: "1" (syscall),				      \
+			"r" (a), "r" (b), "r" (c), "r" (d),		      \
+			"2" (e), "3" (f)				      \
+			: SYSCALL_CLOBBERS);
+#endif
+
+#define _syscall6(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e, ftype, f) \
+type name (atype a, btype b, ctype c, dtype d, etype e, ftype f)	      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register etype __e __asm__ (SYSCALL_ARG4) = e;			      \
+  register etype __f __asm__ (SYSCALL_ARG5) = f;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __SYSCALL6_TRAP(__syscall, __ret, __a, __b, __c, __d, __e, __f);	      \
+  __syscall_return (type, __ret);					      \
+}
+		
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+extern inline _syscall0(pid_t,setsid)
+extern inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+extern inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+extern inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+extern inline _syscall1(int,dup,int,fd)
+extern inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+extern inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+extern inline _syscall1(int,close,int,fd)
+extern inline _syscall1(int,_exit,int,exitcode)
+extern inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+extern inline pid_t wait(int * wait_stat)
+{
+	return waitpid (-1, wait_stat, 0);
+}
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t offset);
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+struct pt_regs;
+int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs);
+int sys_pipe (int *fildes);
+int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(name)						      \
+  asm (".weak\t" C_SYMBOL_STRING(name) ";"				      \
+       ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall))
+#if 0
+/* This doesn't work if there's a function prototype for NAME visible,
+   because the argument types probably won't match.  */
+#define cond_syscall(name)  \
+  void name (void) __attribute__ ((weak, alias ("sys_ni_syscall")));
+#endif
+
+#endif /* __V850_UNISTD_H__ */
diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h
new file mode 100644
index 000000000000..ccf4cea6dc9c
--- /dev/null
+++ b/include/asm-v850/user.h
@@ -0,0 +1,56 @@
+#ifndef __V850_USER_H__
+#define __V850_USER_H__
+
+/* Adapted from <asm-ppc/user.h>.  */
+
+#ifdef __KERNEL__
+
+#include <linux/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_USER_H__ */
diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h
new file mode 100644
index 000000000000..5a222eb5117f
--- /dev/null
+++ b/include/asm-v850/v850e.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-v850/v850e.h -- V850E CPU
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_H__
+#define __V850_V850E_H__
+
+#include <asm/v850e_intc.h>
+
+#define CPU_ARCH "v850e"
+
+#endif /* __V850_V850E_H__ */
diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h
new file mode 100644
index 000000000000..48680408ab7e
--- /dev/null
+++ b/include/asm-v850/v850e2.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E2_H__
+#define __V850_V850E2_H__
+
+#include <asm/v850e_intc.h>	/* v850e-style interrupt system.  */
+
+
+#define CPU_ARCH "v850e2"
+
+
+/* Control registers.  */
+
+/* Chip area select control */ 
+#define V850E2_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
+#define V850E2_CSC(n)		(*(volatile u16 *)V850E2_CSC_ADDR(n))
+/* I/O area select control */
+#define V850E2_BPC_ADDR		0xFFFFF064
+#define V850E2_BPC		(*(volatile u16 *)V850E2_BPC_ADDR)
+/* Bus size configuration */
+#define V850E2_BSC_ADDR		0xFFFFF066
+#define V850E2_BSC		(*(volatile u16 *)V850E2_BSC_ADDR)
+/* Endian configuration */
+#define V850E2_BEC_ADDR		0xFFFFF068
+#define V850E2_BEC		(*(volatile u16 *)V850E2_BEC_ADDR)
+/* Cache configuration */
+#define V850E2_BHC_ADDR		0xFFFFF06A
+#define V850E2_BHC		(*(volatile u16 *)V850E2_BHC_ADDR)
+/* NPB strobe-wait configuration */
+#define V850E2_VSWC_ADDR	0xFFFFF06E
+#define V850E2_VSWC		(*(volatile u16 *)V850E2_VSWC_ADDR)
+/* Bus cycle type */
+#define V850E2_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
+#define V850E2_BCT(n)		(*(volatile u16 *)V850E2_BCT_ADDR(n))
+/* Data wait control */
+#define V850E2_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
+#define V850E2_DWC(n)		(*(volatile u16 *)V850E2_DWC_ADDR(n))
+/* Bus cycle control */
+#define V850E2_BCC_ADDR		0xFFFFF488
+#define V850E2_BCC		(*(volatile u16 *)V850E2_BCC_ADDR)
+/* Address wait control */
+#define V850E2_ASC_ADDR		0xFFFFF48A
+#define V850E2_ASC		(*(volatile u16 *)V850E2_ASC_ADDR)
+/* Local bus sizing control */
+#define V850E2_LBS_ADDR		0xFFFFF48E
+#define V850E2_LBS		(*(volatile u16 *)V850E2_LBS_ADDR)
+/* Line buffer control */
+#define V850E2_LBC_ADDR(n)	(0xFFFFF490 + (n) * 2)
+#define V850E2_LBC(n)		(*(volatile u16 *)V850E2_LBC_ADDR(n))
+/* SDRAM configuration */
+#define V850E2_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
+#define V850E2_SCR(n)		(*(volatile u16 *)V850E2_SCR_ADDR(n))
+/* SDRAM refresh cycle control */
+#define V850E2_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
+#define V850E2_RFS(n)		(*(volatile u16 *)V850E2_RFS_ADDR(n))
+
+
+#endif /* __V850_V850E2_H__ */
diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h
new file mode 100644
index 000000000000..61acda1023e8
--- /dev/null
+++ b/include/asm-v850/v850e2_cache.h
@@ -0,0 +1,74 @@
+/*
+ * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2
+ * 	cache memories
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E2_CACHE_H__
+#define __V850_V850E2_CACHE_H__
+
+#include <asm/types.h>
+
+
+/* Cache control registers.  */
+
+/* Bus Transaction Control */
+#define V850E2_CACHE_BTSC_ADDR	0xFFFFF070
+#define V850E2_CACHE_BTSC 	(*(volatile u16 *)V850E2_CACHE_BTSC_ADDR)
+#define V850E2_CACHE_BTSC_ICM	0x0001 /* icache enable */
+#define V850E2_CACHE_BTSC_DCM0	0x0004 /* dcache enable, bit 0 */
+#define V850E2_CACHE_BTSC_DCM1	0x0008 /* dcache enable, bit 1 */
+#define V850E2_CACHE_BTSC_DCM_WT		      /* write-through */ \
+			V850E2_CACHE_BTSC_DCM0
+#ifdef CONFIG_V850E2_V850E2S
+# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC    /* write-back, non-alloc */ \
+			V850E2_CACHE_BTSC_DCM1	
+# define V850E2_CACHE_BTSC_DCM_WB_ALLOC	      /* write-back, non-alloc */ \
+			(V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0)
+# define V850E2_CACHE_BTSC_ISEQ	0x0010 /* icache `address sequence mode' */
+# define V850E2_CACHE_BTSC_DSEQ	0x0020 /* dcache `address sequence mode' */
+# define V850E2_CACHE_BTSC_IRFC	0x0030
+# define V850E2_CACHE_BTSC_ILCD	0x4000
+# define V850E2_CACHE_BTSC_VABE	0x8000
+#endif /* CONFIG_V850E2_V850E2S */
+
+/* Cache operation start address register (low-bits).  */
+#define V850E2_CACHE_CADL_ADDR	0xFFFFF074
+#define V850E2_CACHE_CADL 	(*(volatile u16 *)V850E2_CACHE_CADL_ADDR)
+/* Cache operation start address register (high-bits).  */
+#define V850E2_CACHE_CADH_ADDR	0xFFFFF076
+#define V850E2_CACHE_CADH 	(*(volatile u16 *)V850E2_CACHE_CADH_ADDR)
+/* Cache operation count register.  */
+#define V850E2_CACHE_CCNT_ADDR	0xFFFFF078
+#define V850E2_CACHE_CCNT 	(*(volatile u16 *)V850E2_CACHE_CCNT_ADDR)
+/* Cache operation specification register.  */
+#define V850E2_CACHE_COPR_ADDR	0xFFFFF07A
+#define V850E2_CACHE_COPR 	(*(volatile u16 *)V850E2_CACHE_COPR_ADDR)
+#define V850E2_CACHE_COPR_STRT	0x0001 /* start cache operation */
+#define V850E2_CACHE_COPR_LBSL	0x0100 /* 0 = icache, 1 = dcache */
+#define V850E2_CACHE_COPR_WSLE	0x0200 /* operate on cache way */
+#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */
+#define V850E2_CACHE_COPR_CFC(op)  ((op)  * 0x1000) /* cache function code */
+
+
+/* Size of a cache line in bytes.  */
+#define V850E2_CACHE_LINE_SIZE_BITS	4
+#define V850E2_CACHE_LINE_SIZE		(1 << V850E2_CACHE_LINE_SIZE_BITS)
+
+/* The size of each cache `way' in lines.  */
+#define V850E2_CACHE_WAY_SIZE		256
+
+
+/* For <asm/cache.h> */
+#define L1_CACHE_BYTES			V850E2_CACHE_LINE_SIZE
+
+
+#endif /* __V850_V850E2_CACHE_H__ */
diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h
new file mode 100644
index 000000000000..aa7d7eb9da50
--- /dev/null
+++ b/include/asm-v850/v850e_cache.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* This file implements cache control for the rather simple cache used on
+   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
+   CPU.  V850E2 processors have their own (better) cache
+   implementation.  */
+
+#ifndef __V850_V850E_CACHE_H__
+#define __V850_V850E_CACHE_H__
+
+#include <asm/types.h>
+
+
+/* Cache control registers.  */
+#define V850E_CACHE_BHC_ADDR	0xFFFFF06A
+#define V850E_CACHE_BHC		(*(volatile u16 *)V850E_CACHE_BHC_ADDR)
+#define V850E_CACHE_ICC_ADDR	0xFFFFF070
+#define V850E_CACHE_ICC		(*(volatile u16 *)V850E_CACHE_ICC_ADDR)
+#define V850E_CACHE_ISI_ADDR	0xFFFFF072
+#define V850E_CACHE_ISI		(*(volatile u16 *)V850E_CACHE_ISI_ADDR)
+#define V850E_CACHE_DCC_ADDR	0xFFFFF078
+#define V850E_CACHE_DCC		(*(volatile u16 *)V850E_CACHE_DCC_ADDR)
+
+/* Size of a cache line in bytes.  */
+#define V850E_CACHE_LINE_SIZE	16
+
+/* For <asm/cache.h> */
+#define L1_CACHE_BYTES		V850E_CACHE_LINE_SIZE
+
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/* Set caching params via the BHC, ICC, and DCC registers.  */
+void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc);
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_CACHE_H__ */
diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h
new file mode 100644
index 000000000000..6fdf95708317
--- /dev/null
+++ b/include/asm-v850/v850e_intc.h
@@ -0,0 +1,133 @@
+/*
+ * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC)
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_INTC_H__
+#define __V850_V850E_INTC_H__
+
+
+/* There are 4 16-bit `Interrupt Mask Registers' located contiguously
+   starting from this base.  Each interrupt uses a single bit to
+   indicated enabled/disabled status.  */
+#define V850E_INTC_IMR_BASE_ADDR  0xFFFFF100
+#define V850E_INTC_IMR_ADDR(irq)  (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3))
+#define V850E_INTC_IMR_BIT(irq)	  ((irq) & 0x7)
+
+/* Each maskable interrupt has a single-byte control register at this
+   address.  */
+#define V850E_INTC_IC_BASE_ADDR	  0xFFFFF110
+#define V850E_INTC_IC_ADDR(irq)	  (V850E_INTC_IC_BASE_ADDR + ((irq) << 1))
+#define V850E_INTC_IC(irq)	  (*(volatile u8 *)V850E_INTC_IC_ADDR(irq))
+/* Encode priority PR for storing in an interrupt control register.  */
+#define V850E_INTC_IC_PR(pr)	  (pr)
+/* Interrupt disable bit in an interrupt control register.  */
+#define V850E_INTC_IC_MK_BIT	  6
+#define V850E_INTC_IC_MK	  (1 << V850E_INTC_IC_MK_BIT)
+/* Interrupt pending flag in an interrupt control register.  */
+#define V850E_INTC_IC_IF_BIT	  7
+#define V850E_INTC_IC_IF	  (1 << V850E_INTC_IC_IF_BIT)
+
+/* The ISPR (In-service priority register) contains one bit for each interrupt
+   priority level, which is set to one when that level is currently being
+   serviced (and thus blocking any interrupts of equal or lesser level).  */
+#define V850E_INTC_ISPR_ADDR	  0xFFFFF1FA
+#define V850E_INTC_ISPR		  (*(volatile u8 *)V850E_INTC_ISPR_ADDR)
+
+
+#ifndef __ASSEMBLY__
+
+/* Enable interrupt handling for interrupt IRQ.  */
+static inline void v850e_intc_enable_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("clr1 %0, [%1]"
+			      :: "r" (V850E_INTC_IMR_BIT (irq)),
+			         "r" (V850E_INTC_IMR_ADDR (irq))
+			      : "memory");
+}
+
+/* Disable interrupt handling for interrupt IRQ.  Note that any
+   interrupts received while disabled will be delivered once the
+   interrupt is enabled again, unless they are explicitly cleared using
+   `v850e_intc_clear_pending_irq'.  */
+static inline void v850e_intc_disable_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("set1 %0, [%1]"
+			      :: "r" (V850E_INTC_IMR_BIT (irq)),
+			         "r" (V850E_INTC_IMR_ADDR (irq))
+			      : "memory");
+}
+
+/* Return true if interrupt handling for interrupt IRQ is enabled.  */
+static inline int v850e_intc_irq_enabled (unsigned irq)
+{
+	int rval;
+	__asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0"
+			      : "=r" (rval)
+			      : "r" (V850E_INTC_IMR_BIT (irq)),
+			        "r" (V850E_INTC_IMR_ADDR (irq)));
+	return rval;
+}
+
+/* Disable irqs from 0 until LIMIT.  LIMIT must be a multiple of 8.  */
+static inline void _v850e_intc_disable_irqs (unsigned limit)
+{
+	unsigned long addr;
+	for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8)
+		*(char *)addr = 0xFF;
+}
+
+/* Disable all irqs.  This is purposely a macro, because NUM_MACH_IRQS
+   will be only be defined later.  */
+#define v850e_intc_disable_irqs()   _v850e_intc_disable_irqs (NUM_MACH_IRQS)
+
+/* Clear any pending interrupts for IRQ.  */
+static inline void v850e_intc_clear_pending_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("clr1 %0, 0[%1]"
+			      :: "i" (V850E_INTC_IC_IF_BIT),
+			         "r" (V850E_INTC_IC_ADDR (irq))
+			      : "memory");
+}
+
+/* Return true if interrupt IRQ is pending (but disabled).  */
+static inline int v850e_intc_irq_pending (unsigned irq)
+{
+	int rval;
+	__asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0"
+			      : "=r" (rval)
+			      : "i" (V850E_INTC_IC_IF_BIT),
+			        "r" (V850E_INTC_IC_ADDR (irq)));
+	return rval;
+}
+
+
+struct v850e_intc_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
+				       struct hw_interrupt_type *hw_irq_types);
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_INTC_H__ */
diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h
new file mode 100644
index 000000000000..f70575df6ea9
--- /dev/null
+++ b/include/asm-v850/v850e_timer_c.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used
+ *	with the V850E cpu core
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* NOTE: this include file currently contains only enough to allow us to
+   use timer C as an interrupt pass-through.  */
+
+#ifndef __V850_V850E_TIMER_C_H__
+#define __V850_V850E_TIMER_C_H__
+
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Timer C (16-bit interval timers).  */
+
+/* Control register 0 for timer C.  */
+#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n))
+#define V850E_TIMER_C_TMCC0(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n))
+#define V850E_TIMER_C_TMCC0_CAE	  0x01 /* clock action enable */
+#define V850E_TIMER_C_TMCC0_CE	  0x02 /* count enable */
+/* ... */
+
+/* Control register 1 for timer C.  */
+#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n))
+#define V850E_TIMER_C_TMCC1(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n))
+#define V850E_TIMER_C_TMCC1_CMS0  0x01 /* capture/compare mode select (ccc0) */
+#define V850E_TIMER_C_TMCC1_CMS1  0x02 /* capture/compare mode select (ccc1) */
+/* ... */
+
+/* Interrupt edge-sensitivity control for timer C.  */
+#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n))
+#define V850E_TIMER_C_SESC(n)	  (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n))
+
+/* ...etc... */
+
+
+#endif /* __V850_V850E_TIMER_C_H__  */
diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h
new file mode 100644
index 000000000000..417612c5b22f
--- /dev/null
+++ b/include/asm-v850/v850e_timer_d.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used
+ *	with the V850E cpu core
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_TIMER_D_H__
+#define __V850_V850E_TIMER_D_H__
+
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Timer D (16-bit interval timers).  */
+
+/* Count registers for timer D.  */
+#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_TMD(n)	  (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n))
+
+/* Count compare registers for timer D.  */
+#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_CMD(n)	  (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n))
+
+/* Control registers for timer D.  */
+#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_TMCD(n)	   (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n))
+/* Control bits for timer D.  */
+#define V850E_TIMER_D_TMCD_CE  	   0x2 /* count enable */
+#define V850E_TIMER_D_TMCD_CAE	   0x1 /* clock action enable */
+/* Clock divider setting (log2).  */
+#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4)
+/* Minimum clock divider setting (log2).  */
+#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */
+#define V850E_TIMER_D_TMCD_CS_MIN  2 /* Default is correct for the v850e/ma1 */
+#endif
+/* Maximum clock divider setting (log2).  */
+#define V850E_TIMER_D_TMCD_CS_MAX  (V850E_TIMER_D_TMCD_CS_MIN + 7)
+
+/* Return the clock-divider (log2) of timer D unit N.  */
+#define V850E_TIMER_D_DIVLOG2(n) \
+  (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN)
+
+
+#ifndef __ASSEMBLY__
+
+/* Start interval timer TIMER (0-3).  The timer will issue the
+   corresponding INTCMD interrupt RATE times per second.  This function
+   does not enable the interrupt.  */
+extern void v850e_timer_d_configure (unsigned timer, unsigned rate);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_TIMER_D_H__  */
diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h
new file mode 100644
index 000000000000..5930d5990b19
--- /dev/null
+++ b/include/asm-v850/v850e_uart.h
@@ -0,0 +1,77 @@
+/*
+ * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* There's not actually a single UART implementation used by V850E CPUs,
+   but rather a series of implementations that are all `close' to one
+   another.  This file corresponds to the single driver which handles all
+   of them.  */
+
+#ifndef __V850_V850E_UART_H__
+#define __V850_V850E_UART_H__
+
+#include <linux/config.h>
+#include <linux/termios.h>
+
+#include <asm/v850e_utils.h>
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Include model-specific definitions.  */
+#ifdef CONFIG_V850E_UART
+# ifdef CONFIG_V850E_UARTB
+#  include <asm-v850/v850e_uartb.h>
+# else
+#  include <asm-v850/v850e_uarta.h> /* original V850E UART */
+# endif
+#endif
+
+
+/* Optional capabilities some hardware provides.  */
+
+/* This UART doesn't implement RTS/CTS by default, but some platforms
+   implement them externally, so check to see if <asm/machdep.h> defined
+   anything.  */
+#ifdef V850E_UART_CTS
+#define v850e_uart_cts(n)		V850E_UART_CTS(n)
+#else
+#define v850e_uart_cts(n)		(1)
+#endif
+
+/* Do the same for RTS.  */
+#ifdef V850E_UART_SET_RTS
+#define v850e_uart_set_rts(n,v)		V850E_UART_SET_RTS(n,v)
+#else
+#define v850e_uart_set_rts(n,v)		((void)0)
+#endif
+
+
+/* This is the serial channel to use for the boot console (if desired).  */
+#ifndef V850E_UART_CONSOLE_CHANNEL
+# define V850E_UART_CONSOLE_CHANNEL 0
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+/* Setup a console using channel 0 of the builtin uart.  */
+extern void v850e_uart_cons_init (unsigned chan);
+
+/* Configure and turn on uart channel CHAN, using the termios `control
+   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
+void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_UART_H__ */
diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
new file mode 100644
index 000000000000..e483e0950725
--- /dev/null
+++ b/include/asm-v850/v850e_uarta.h
@@ -0,0 +1,278 @@
+/*
+ * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* This is the original V850E UART implementation is called just `UART' in
+   the docs, but we name this header file <asm/v850e_uarta.h> because the
+   name <asm/v850e_uart.h> is used for the common driver that handles both
+   `UART' and `UARTB' implementations.  */
+
+#ifndef __V850_V850E_UARTA_H__
+#define __V850_V850E_UARTA_H__
+
+
+/* Raw hardware interface.  */
+
+/* The base address of the UART control registers for channel N.
+   The default is the address used on the V850E/MA1.  */
+#ifndef V850E_UART_BASE_ADDR
+#define V850E_UART_BASE_ADDR(n)		(0xFFFFFA00 + 0x10 * (n))
+#endif 
+
+/* Addresses of specific UART control registers for channel N.
+   The defaults are the addresses used on the V850E/MA1; if a platform
+   wants to redefine any of these, it must redefine them all.  */
+#ifndef V850E_UART_ASIM_ADDR
+#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
+#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
+#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x3)
+#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
+#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x5)
+#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
+#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x7)
+#endif
+
+/* UART config registers.  */
+#define V850E_UART_ASIM(n)	(*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
+/* Control bits for config registers.  */
+#define V850E_UART_ASIM_CAE	0x80 /* clock enable */
+#define V850E_UART_ASIM_TXE	0x40 /* transmit enable */
+#define V850E_UART_ASIM_RXE	0x20 /* receive enable */
+#define V850E_UART_ASIM_PS_MASK	0x18 /* mask covering parity-select bits */
+#define V850E_UART_ASIM_PS_NONE	0x00 /* no parity */
+#define V850E_UART_ASIM_PS_ZERO	0x08 /* zero parity */
+#define V850E_UART_ASIM_PS_ODD	0x10 /* odd parity */
+#define V850E_UART_ASIM_PS_EVEN	0x18 /* even parity */
+#define V850E_UART_ASIM_CL_8	0x04 /* char len is 8 bits (otherwise, 7) */
+#define V850E_UART_ASIM_SL_2	0x02 /* 2 stop bits (otherwise, 1) */
+#define V850E_UART_ASIM_ISRM	0x01 /* generate INTSR interrupt on errors
+					(otherwise, generate INTSER) */
+
+/* UART serial interface status registers.  */
+#define V850E_UART_ASIS(n)	(*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UART_ASIS_PE	0x04 /* parity error */
+#define V850E_UART_ASIS_FE	0x02 /* framing error */
+#define V850E_UART_ASIS_OVE	0x01 /* overrun error */
+
+/* UART serial interface transmission status registers.  */
+#define V850E_UART_ASIF(n)	(*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
+#define V850E_UART_ASIF_TXBF	0x02 /* transmit buffer flag (data in TXB) */
+#define V850E_UART_ASIF_TXSF	0x01 /* transmit shift flag (sending data) */
+
+/* UART receive buffer register.  */
+#define V850E_UART_RXB(n)	(*(volatile u8 *)V850E_UART_RXB_ADDR(n))
+
+/* UART transmit buffer register.  */
+#define V850E_UART_TXB(n)	(*(volatile u8 *)V850E_UART_TXB_ADDR(n))
+
+/* UART baud-rate generator control registers.  */
+#define V850E_UART_CKSR(n)	(*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
+#define V850E_UART_CKSR_MAX	11
+#define V850E_UART_BRGC(n)	(*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
+#define V850E_UART_BRGC_MIN	8
+
+
+#ifndef V850E_UART_CKSR_MAX_FREQ
+#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
+#endif
+
+/* Calculate the minimum value for CKSR on this processor.  */
+static inline unsigned v850e_uart_cksr_min (void)
+{
+	int min = 0;
+	unsigned freq = V850E_UART_BASE_FREQ;
+	while (freq > V850E_UART_CKSR_MAX_FREQ) {
+		freq >>= 1;
+		min++;
+	}
+	return min;
+}
+
+
+/* Slightly abstract interface used by driver.  */
+
+
+/* Interrupts used by the UART.  */
+
+/* Received when the most recently transmitted character has been sent.  */
+#define V850E_UART_TX_IRQ(chan)		IRQ_INTST (chan)
+/* Received when a new character has been received.  */
+#define V850E_UART_RX_IRQ(chan)		IRQ_INTSR (chan)
+
+
+/* UART clock generator interface.  */
+
+/* This type encapsulates a particular uart frequency.  */
+typedef struct {
+	unsigned clk_divlog2;
+	unsigned brgen_count;
+} v850e_uart_speed_t;
+
+/* Calculate a uart speed from BAUD for this uart.  */
+static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
+{
+	v850e_uart_speed_t speed;
+
+	/* Calculate the log2 clock divider and baud-rate counter values
+	   (note that the UART divides the resulting clock by 2, so
+	   multiply BAUD by 2 here to compensate).  */
+	calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
+			     v850e_uart_cksr_min(),
+			     V850E_UART_CKSR_MAX, 8/*bits*/,
+			     &speed.clk_divlog2, &speed.brgen_count);
+
+	return speed;
+}
+
+/* Return the current speed of uart channel CHAN.  */
+static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
+{
+	v850e_uart_speed_t speed;
+	speed.clk_divlog2 = V850E_UART_CKSR (chan);
+	speed.brgen_count = V850E_UART_BRGC (chan);
+	return speed;
+}
+
+/* Set the current speed of uart channel CHAN.  */
+static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
+{
+	V850E_UART_CKSR (chan) = speed.clk_divlog2;
+	V850E_UART_BRGC (chan) = speed.brgen_count;
+}
+
+static inline int
+v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
+{
+	return speed1.clk_divlog2 == speed2.clk_divlog2
+		&& speed1.brgen_count == speed2.brgen_count;
+}
+
+/* Minimum baud rate possible.  */
+#define v850e_uart_min_baud() \
+   ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
+
+/* Maximum baud rate possible.  The error is quite high at max, though.  */
+#define v850e_uart_max_baud() \
+   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
+
+/* The `maximum' clock rate the uart can used, which is wanted (though not
+   really used in any useful way) by the serial framework.  */
+#define v850e_uart_max_clock() \
+   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
+
+
+/* UART configuration interface.  */
+
+/* Type of the uart config register; must be a scalar.  */
+typedef u16 v850e_uart_config_t;
+
+/* The uart hardware config register for channel CHAN.  */
+#define V850E_UART_CONFIG(chan)		V850E_UART_ASIM (chan)
+
+/* This config bit set if the uart is enabled.  */
+#define V850E_UART_CONFIG_ENABLED	V850E_UART_ASIM_CAE
+/* If the uart _isn't_ enabled, store this value to it to do so.  */
+#define V850E_UART_CONFIG_INIT		V850E_UART_ASIM_CAE
+/* Store this config value to disable the uart channel completely.  */
+#define V850E_UART_CONFIG_FINI		0
+
+/* Setting/clearing these bits enable/disable TX/RX, respectively (but
+   otherwise generally leave things running).  */
+#define V850E_UART_CONFIG_RX_ENABLE	V850E_UART_ASIM_RXE
+#define V850E_UART_CONFIG_TX_ENABLE	V850E_UART_ASIM_TXE
+
+/* These masks define which config bits affect TX/RX modes, respectively.  */
+#define V850E_UART_CONFIG_RX_BITS \
+  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
+#define V850E_UART_CONFIG_TX_BITS \
+  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
+
+static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
+{
+	v850e_uart_config_t config = 0;
+
+	/* Figure out new configuration of control register.  */
+	if (cflags & CSTOPB)
+		/* Number of stop bits, 1 or 2.  */
+		config |= V850E_UART_ASIM_SL_2;
+	if ((cflags & CSIZE) == CS8)
+		/* Number of data bits, 7 or 8.  */
+		config |= V850E_UART_ASIM_CL_8;
+	if (! (cflags & PARENB))
+		/* No parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_NONE;
+	else if (cflags & PARODD)
+		/* Odd parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_ODD;
+	else
+		/* Even parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_EVEN;
+	if (cflags & CREAD)
+		/* Reading enabled.  */
+		config |= V850E_UART_ASIM_RXE;
+
+	config |= V850E_UART_ASIM_CAE;
+	config |= V850E_UART_ASIM_TXE; /* Writing is always enabled.  */
+	config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq.  */
+
+	return config;
+}
+
+/* This should delay as long as necessary for a recently written config
+   setting to settle, before we turn the uart back on.  */
+static inline void
+v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
+{
+	/* The UART may not be reset properly unless we wait at least 2
+	   `basic-clocks' until turning on the TXE/RXE bits again.
+	   A `basic clock' is the clock used by the baud-rate generator,
+	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
+	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
+	register unsigned count = 1 << speed.clk_divlog2;
+	while (--count != 0)
+		/* nothing */;
+}
+
+
+/* RX/TX interface.  */
+
+/* Return true if all characters awaiting transmission on uart channel N
+   have been transmitted.  */
+#define v850e_uart_xmit_done(n)						      \
+   (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_done(n)				      \
+   do { } while (! v850e_uart_xmit_done (n))
+
+/* Return true if uart channel N is ready to transmit a character.  */
+#define v850e_uart_xmit_ok(n)						      \
+   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_ok(n)					      \
+   do { } while (! v850e_uart_xmit_ok (n))
+
+/* Write character CH to uart channel CHAN.  */
+#define v850e_uart_putc(chan, ch)	(V850E_UART_TXB(chan) = (ch))
+
+/* Return latest character read on channel CHAN.  */
+#define v850e_uart_getc(chan)		V850E_UART_RXB (chan)
+
+/* Return bit-mask of uart error status.  */
+#define v850e_uart_err(chan)		V850E_UART_ASIS (chan)
+/* Various error bits set in the error result.  */
+#define V850E_UART_ERR_OVERRUN		V850E_UART_ASIS_OVE
+#define V850E_UART_ERR_FRAME		V850E_UART_ASIS_FE
+#define V850E_UART_ERR_PARITY		V850E_UART_ASIS_PE
+
+
+#endif /* __V850_V850E_UARTA_H__ */
diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h
new file mode 100644
index 000000000000..6d4767d5a835
--- /dev/null
+++ b/include/asm-v850/v850e_uartb.h
@@ -0,0 +1,262 @@
+/*
+ * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* The V850E UARTB is basically a superset of the original V850E UART, but
+   even where it's the same, the names and details have changed a bit.
+   It's similar enough to use the same driver (v850e_uart.c), but the
+   details have been abstracted slightly to do so.  */
+
+#ifndef __V850_V850E_UARTB_H__
+#define __V850_V850E_UARTB_H__
+
+
+/* Raw hardware interface.  */
+
+#define V850E_UARTB_BASE_ADDR(n)	(0xFFFFFA00 + 0x10 * (n))
+
+/* Addresses of specific UART control registers for channel N.  */
+#define V850E_UARTB_CTL0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x0)
+#define V850E_UARTB_CTL2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x2)
+#define V850E_UARTB_STR_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x4)
+#define V850E_UARTB_RX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x6)
+#define V850E_UARTB_RXAP_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x6)
+#define V850E_UARTB_TX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x8)
+#define V850E_UARTB_FIC0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xA)
+#define V850E_UARTB_FIC1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xB)
+#define V850E_UARTB_FIC2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xC)
+#define V850E_UARTB_FIS0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xE)
+#define V850E_UARTB_FIS1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xF)
+
+/* UARTB control register 0 (general config).  */
+#define V850E_UARTB_CTL0(n)	(*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n))
+/* Control bits for config registers.  */
+#define V850E_UARTB_CTL0_PWR		0x80	/* clock enable */
+#define V850E_UARTB_CTL0_TXE		0x40	/* transmit enable */
+#define V850E_UARTB_CTL0_RXE		0x20	/* receive enable */
+#define V850E_UARTB_CTL0_DIR		0x10	/*  */
+#define V850E_UARTB_CTL0_PS1		0x08	/* parity */
+#define V850E_UARTB_CTL0_PS0		0x04	/* parity */
+#define V850E_UARTB_CTL0_CL		0x02	/* char len 1:8bit, 0:7bit */
+#define V850E_UARTB_CTL0_SL		0x01	/* stop bit 1:2bit, 0:1bit */
+#define V850E_UARTB_CTL0_PS_MASK	0x0C	/* mask covering parity bits */
+#define V850E_UARTB_CTL0_PS_NONE	0x00	/* no parity */
+#define V850E_UARTB_CTL0_PS_ZERO	0x04	/* zero parity */
+#define V850E_UARTB_CTL0_PS_ODD		0x08	/* odd parity */
+#define V850E_UARTB_CTL0_PS_EVEN	0x0C	/* even parity */
+#define V850E_UARTB_CTL0_CL_8		0x02	/* char len 1:8bit, 0:7bit */
+#define V850E_UARTB_CTL0_SL_2		0x01	/* stop bit 1:2bit, 0:1bit */
+
+/* UARTB control register 2 (clock divider).  */
+#define V850E_UARTB_CTL2(n)	(*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n))
+#define V850E_UARTB_CTL2_MIN	4
+#define V850E_UARTB_CTL2_MAX	0xFFFF
+
+/* UARTB serial interface status register.  */
+#define V850E_UARTB_STR(n)	(*(volatile u8 *)V850E_UARTB_STR_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UARTB_STR_TSF	0x80	/* UBTX or FIFO exist data  */
+#define V850E_UARTB_STR_OVF	0x08	/* overflow error */
+#define V850E_UARTB_STR_PE	0x04	/* parity error */
+#define V850E_UARTB_STR_FE	0x02	/* framing error */
+#define V850E_UARTB_STR_OVE	0x01	/* overrun error */
+
+/* UARTB receive data register.  */
+#define V850E_UARTB_RX(n)	(*(volatile u8 *)V850E_UARTB_RX_ADDR(n))
+#define V850E_UARTB_RXAP(n)	(*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UARTB_RXAP_PEF	0x0200 /* parity error */
+#define V850E_UARTB_RXAP_FEF	0x0100 /* framing error */
+
+/* UARTB transmit data register.  */
+#define V850E_UARTB_TX(n)	(*(volatile u8 *)V850E_UARTB_TX_ADDR(n))
+
+/* UARTB FIFO control register 0.  */
+#define V850E_UARTB_FIC0(n)	(*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n))
+
+/* UARTB FIFO control register 1.  */
+#define V850E_UARTB_FIC1(n)	(*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n))
+
+/* UARTB FIFO control register 2.  */
+#define V850E_UARTB_FIC2(n)	(*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n))
+
+/* UARTB FIFO status register 0.  */
+#define V850E_UARTB_FIS0(n)	(*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n))
+
+/* UARTB FIFO status register 1.  */
+#define V850E_UARTB_FIS1(n)	(*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n))
+
+
+/* Slightly abstract interface used by driver.  */
+
+
+/* Interrupts used by the UART.  */
+
+/* Received when the most recently transmitted character has been sent.  */
+#define V850E_UART_TX_IRQ(chan)		IRQ_INTUBTIT (chan)
+/* Received when a new character has been received.  */
+#define V850E_UART_RX_IRQ(chan)		IRQ_INTUBTIR (chan)
+
+/* Use by serial driver for information purposes.  */
+#define V850E_UART_BASE_ADDR(chan)	V850E_UARTB_BASE_ADDR(chan)
+
+
+/* UART clock generator interface.  */
+
+/* This type encapsulates a particular uart frequency.  */
+typedef u16 v850e_uart_speed_t;
+
+/* Calculate a uart speed from BAUD for this uart.  */
+static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
+{
+	v850e_uart_speed_t speed;
+
+	/*
+	 * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2
+	 * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4
+	 * baud = fx / 2*speed   [ speed >= 4 ]
+	 */
+	speed = V850E_UARTB_CTL2_MIN;
+	while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud)
+		speed++;
+
+	return speed;
+}
+
+/* Return the current speed of uart channel CHAN.  */
+#define v850e_uart_speed(chan)		    V850E_UARTB_CTL2 (chan)
+
+/* Set the current speed of uart channel CHAN.  */
+#define v850e_uart_set_speed(chan, speed)   (V850E_UARTB_CTL2 (chan) = (speed))
+
+/* Return true if SPEED1 and SPEED2 are the same.  */
+#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2))
+
+/* Minimum baud rate possible.  */
+#define v850e_uart_min_baud() \
+   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX)
+
+/* Maximum baud rate possible.  The error is quite high at max, though.  */
+#define v850e_uart_max_baud() \
+   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN)
+
+/* The `maximum' clock rate the uart can used, which is wanted (though not
+   really used in any useful way) by the serial framework.  */
+#define v850e_uart_max_clock() \
+   (V850E_UARTB_BASE_FREQ / 2)
+
+
+/* UART configuration interface.  */
+
+/* Type of the uart config register; must be a scalar.  */
+typedef u16 v850e_uart_config_t;
+
+/* The uart hardware config register for channel CHAN.  */
+#define V850E_UART_CONFIG(chan)		V850E_UARTB_CTL0 (chan)
+
+/* This config bit set if the uart is enabled.  */
+#define V850E_UART_CONFIG_ENABLED	V850E_UARTB_CTL0_PWR
+/* If the uart _isn't_ enabled, store this value to it to do so.  */
+#define V850E_UART_CONFIG_INIT		V850E_UARTB_CTL0_PWR
+/* Store this config value to disable the uart channel completely.  */
+#define V850E_UART_CONFIG_FINI		0
+
+/* Setting/clearing these bits enable/disable TX/RX, respectively (but
+   otherwise generally leave things running).  */
+#define V850E_UART_CONFIG_RX_ENABLE	V850E_UARTB_CTL0_RXE
+#define V850E_UART_CONFIG_TX_ENABLE	V850E_UARTB_CTL0_TXE
+
+/* These masks define which config bits affect TX/RX modes, respectively.  */
+#define V850E_UART_CONFIG_RX_BITS \
+  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8)
+#define V850E_UART_CONFIG_TX_BITS \
+  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2)
+
+static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
+{
+	v850e_uart_config_t config = 0;
+
+	/* Figure out new configuration of control register.  */
+	if (cflags & CSTOPB)
+		/* Number of stop bits, 1 or 2.  */
+		config |= V850E_UARTB_CTL0_SL_2;
+	if ((cflags & CSIZE) == CS8)
+		/* Number of data bits, 7 or 8.  */
+		config |= V850E_UARTB_CTL0_CL_8;
+	if (! (cflags & PARENB))
+		/* No parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_NONE;
+	else if (cflags & PARODD)
+		/* Odd parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_ODD;
+	else
+		/* Even parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_EVEN;
+	if (cflags & CREAD)
+		/* Reading enabled.  */
+		config |= V850E_UARTB_CTL0_RXE;
+
+	config |= V850E_UARTB_CTL0_PWR;
+	config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled.  */
+	config |= V850E_UARTB_CTL0_DIR; /* LSB first.  */
+
+	return config;
+}
+
+/* This should delay as long as necessary for a recently written config
+   setting to settle, before we turn the uart back on.  */
+static inline void
+v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
+{
+	/* The UART may not be reset properly unless we wait at least 2
+	   `basic-clocks' until turning on the TXE/RXE bits again.
+	   A `basic clock' is the clock used by the baud-rate generator,
+	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
+	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
+	register unsigned count = 1 << speed;
+	while (--count != 0)
+		/* nothing */;
+}
+
+
+/* RX/TX interface.  */
+
+/* Return true if all characters awaiting transmission on uart channel N
+   have been transmitted.  */
+#define v850e_uart_xmit_done(n)						      \
+   (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_done(n)				      \
+   do { } while (! v850e_uart_xmit_done (n))
+
+/* Return true if uart channel N is ready to transmit a character.  */
+#define v850e_uart_xmit_ok(n)						      \
+   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_ok(n)					      \
+   do { } while (! v850e_uart_xmit_ok (n))
+
+/* Write character CH to uart channel CHAN.  */
+#define v850e_uart_putc(chan, ch)	(V850E_UARTB_TX(chan) = (ch))
+
+/* Return latest character read on channel CHAN.  */
+#define v850e_uart_getc(chan)		V850E_UARTB_RX (chan)
+
+/* Return bit-mask of uart error status.  */
+#define v850e_uart_err(chan)		V850E_UARTB_STR (chan)
+/* Various error bits set in the error result.  */
+#define V850E_UART_ERR_OVERRUN		V850E_UARTB_STR_OVE
+#define V850E_UART_ERR_FRAME		V850E_UARTB_STR_FE
+#define V850E_UART_ERR_PARITY		V850E_UARTB_STR_PE
+
+
+#endif /* __V850_V850E_UARTB_H__ */
diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h
new file mode 100644
index 000000000000..52eb72822d3d
--- /dev/null
+++ b/include/asm-v850/v850e_utils.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-v850/v850e_utils.h -- Utility functions associated with
+ *	V850E CPUs
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_UTILS_H__
+#define __V850_V850E_UTILS_H__
+
+/* Calculate counter clock-divider and count values to attain the
+   desired frequency RATE from the base frequency BASE_FREQ.  The
+   counter is expected to have a clock-divider, which can divide the
+   system cpu clock by a power of two value from MIN_DIVLOG2 to
+   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
+   counts up and resets whenever it's equal to the compare register,
+   generating an interrupt or whatever when it does so).  The returned
+   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
+   -- the counter compare value to use.  Returns true if it was possible
+   to find a reasonable value, otherwise false (and the other return
+   values will be set to be as good as possible).  */
+extern int calc_counter_params (unsigned long base_freq,
+				unsigned long rate,
+				unsigned min_divlog2, unsigned max_divlog2,
+				unsigned counter_size,
+				unsigned *divlog2, unsigned *count);
+
+#endif /* __V850_V850E_UTILS_H__ */
diff --git a/include/asm-x86_64/8253pit.h b/include/asm-x86_64/8253pit.h
new file mode 100644
index 000000000000..285f78488ccb
--- /dev/null
+++ b/include/asm-x86_64/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193182UL
+
+#endif
diff --git a/include/asm-x86_64/a.out.h b/include/asm-x86_64/a.out.h
new file mode 100644
index 000000000000..5952914f4121
--- /dev/null
+++ b/include/asm-x86_64/a.out.h
@@ -0,0 +1,27 @@
+#ifndef __X8664_A_OUT_H__
+#define __X8664_A_OUT_H__
+
+/* 32bit a.out */
+
+struct exec
+{
+  unsigned int a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#ifdef __KERNEL__
+#include <linux/thread_info.h>
+#define STACK_TOP (test_thread_flag(TIF_IA32) ? IA32_PAGE_OFFSET : TASK_SIZE)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
new file mode 100644
index 000000000000..a6b41b892062
--- /dev/null
+++ b/include/asm-x86_64/acpi.h
@@ -0,0 +1,176 @@
+/*
+ *  asm-x86_64/acpi.h
+ *
+ *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
+  *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces 
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+
+
+static inline int
+__acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+__acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
+	((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
+	((Acq) = __acpi_release_global_lock((unsigned int *) GLptr))
+
+/*
+ * Math helper asm macros
+ */
+#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
+        asm("divl %2;"        \
+        :"=a"(q32), "=d"(r32) \
+        :"r"(d32),            \
+        "0"(n_lo), "1"(n_hi))
+
+
+#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
+    asm("shrl   $1,%2;"             \
+        "rcrl   $1,%3;"             \
+        :"=r"(n_hi), "=r"(n_lo)     \
+        :"0"(n_hi), "1"(n_lo))
+
+/*
+ * Refer Intel ACPI _PDC support document for bit definitions
+ */
+#define ACPI_PDC_EST_CAPABILITY_SMP 	0xa
+#define ACPI_PDC_EST_CAPABILITY_MSR	0x1
+
+#ifdef CONFIG_ACPI_BOOT
+extern int acpi_lapic;
+extern int acpi_ioapic;
+extern int acpi_noirq;
+extern int acpi_strict;
+extern int acpi_disabled;
+extern int acpi_pci_disabled;
+extern int acpi_ht;
+static inline void disable_acpi(void) 
+{ 
+	acpi_disabled = 1; 
+	acpi_ht = 0; 
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
+#define FIX_ACPI_PAGES 4
+
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
+
+#else	/* !CONFIG_ACPI_BOOT */
+#define acpi_lapic 0
+#define acpi_ioapic 0
+#endif /* !CONFIG_ACPI_BOOT */
+
+extern int acpi_numa;
+extern int acpi_scan_nodes(unsigned long start, unsigned long end);
+#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
+
+#ifdef CONFIG_ACPI_PCI
+static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void) 
+{
+	acpi_pci_disabled = 1; 
+	acpi_noirq_set();
+}
+extern int acpi_irq_balance_set(char *str);
+#else
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline int acpi_irq_balance_set(char *str) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+
+extern unsigned long acpi_wakeup_address;
+
+/* early initialization routine */
+extern void acpi_reserve_bootmem(void);
+
+#endif /*CONFIG_ACPI_SLEEP*/
+
+#define boot_cpu_physical_apicid boot_cpu_id
+
+extern int acpi_disabled;
+extern int acpi_pci_disabled;
+
+extern u8 x86_acpiid_to_apicid[];
+
+extern int acpi_skip_timer_override;
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-x86_64/agp.h b/include/asm-x86_64/agp.h
new file mode 100644
index 000000000000..0bb9019d58aa
--- /dev/null
+++ b/include/asm-x86_64/agp.h
@@ -0,0 +1,22 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/cacheflush.h>
+
+/* 
+ * Functions to keep the agpgart mappings coherent.
+ * The GART gives the CPU a physical alias of memory. The alias is
+ * mapped uncacheable. Make sure there are no conflicting mappings
+ * with different cachability attributes for the same page.
+ */
+
+int map_page_into_agp(struct page *page);
+int unmap_page_from_agp(struct page *page);
+#define flush_agp_mappings() global_flush_tlb()
+
+/* Could use CLFLUSH here if the cpu supports it. But then it would
+   need to be called for each cacheline of the whole page so it may not be 
+   worth it. Would need a page for it. */
+#define flush_agp_cache() asm volatile("wbinvd":::"memory")
+
+#endif
diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h
new file mode 100644
index 000000000000..c025cc3ef789
--- /dev/null
+++ b/include/asm-x86_64/apic.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_APIC_H
+#define __ASM_APIC_H
+
+#include <linux/config.h>
+#include <linux/pm.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/system.h>
+
+#define Dprintk(x...)
+
+/*
+ * Debugging macros
+ */
+#define APIC_QUIET   0
+#define APIC_VERBOSE 1
+#define APIC_DEBUG   2
+
+extern int apic_verbosity;
+
+/*
+ * Define the default level of output to be very little
+ * This can be turned up by using apic=verbose for more
+ * information and apic=debug for _lots_ of information.
+ * apic_verbosity is defined in apic.c
+ */
+#define apic_printk(v, s, a...) do {       \
+		if ((v) <= apic_verbosity) \
+			printk(s, ##a);    \
+	} while (0)
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+struct pt_regs;
+
+/*
+ * Basic functions accessing APICs.
+ */
+
+static __inline void apic_write(unsigned long reg, unsigned int v)
+{
+	*((volatile unsigned int *)(APIC_BASE+reg)) = v;
+}
+
+static __inline void apic_write_atomic(unsigned long reg, unsigned int v)
+{
+	xchg((volatile unsigned int *)(APIC_BASE+reg), v);
+}
+
+static __inline unsigned int apic_read(unsigned long reg)
+{
+	return *((volatile unsigned int *)(APIC_BASE+reg));
+}
+
+static __inline__ void apic_wait_icr_idle(void)
+{
+	while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY );
+}
+
+#define FORCE_READ_AROUND_WRITE 0
+#define apic_read_around(x)
+#define apic_write_around(x,y) apic_write((x),(y))
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction:
+	 * - a single rmw on Pentium/82489DX
+	 * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write_around(APIC_EOI, 0);
+}
+
+extern int get_maxlvt (void);
+extern void clear_local_APIC (void);
+extern void connect_bsp_APIC (void);
+extern void disconnect_bsp_APIC (void);
+extern void disable_local_APIC (void);
+extern int verify_local_APIC (void);
+extern void cache_APIC_registers (void);
+extern void sync_Arb_IDs (void);
+extern void init_bsp_APIC (void);
+extern void setup_local_APIC (void);
+extern void init_apic_mappings (void);
+extern void smp_local_timer_interrupt (struct pt_regs * regs);
+extern void setup_boot_APIC_clock (void);
+extern void setup_secondary_APIC_clock (void);
+extern void setup_apic_nmi_watchdog (void);
+extern int reserve_lapic_nmi(void);
+extern void release_lapic_nmi(void);
+extern void disable_timer_nmi_watchdog(void);
+extern void enable_timer_nmi_watchdog(void);
+extern void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
+extern int APIC_init_uniprocessor (void);
+extern void disable_APIC_timer(void);
+extern void enable_APIC_timer(void);
+extern void clustered_apic_check(void);
+
+extern int check_nmi_watchdog(void);
+extern void nmi_watchdog_default(void);
+extern int setup_nmi_watchdog(char *);
+
+extern unsigned int nmi_watchdog;
+#define NMI_DEFAULT	-1
+#define NMI_NONE	0
+#define NMI_IO_APIC	1
+#define NMI_LOCAL_APIC	2
+#define NMI_INVALID	3
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#define esr_disable 0
+extern unsigned boot_cpu_id;
+
+#endif /* __ASM_APIC_H */
diff --git a/include/asm-x86_64/apicdef.h b/include/asm-x86_64/apicdef.h
new file mode 100644
index 000000000000..3d7627ffe67d
--- /dev/null
+++ b/include/asm-x86_64/apicdef.h
@@ -0,0 +1,391 @@
+#ifndef __ASM_APICDEF_H
+#define __ASM_APICDEF_H
+
+/*
+ * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
+ *
+ * Alan Cox <Alan.Cox@linux.org>, 1995.
+ * Ingo Molnar <mingo@redhat.com>, 1999, 2000
+ */
+
+#define		APIC_DEFAULT_PHYS_BASE	0xfee00000
+ 
+#define		APIC_ID		0x20
+#define			APIC_ID_MASK		(0xFFu<<24)
+#define			GET_APIC_ID(x)		(((x)>>24)&0xFFu)
+#define		APIC_LVR	0x30
+#define			APIC_LVR_MASK		0xFF00FF
+#define			GET_APIC_VERSION(x)	((x)&0xFFu)
+#define			GET_APIC_MAXLVT(x)	(((x)>>16)&0xFFu)
+#define			APIC_INTEGRATED(x)	((x)&0xF0u)
+#define		APIC_TASKPRI	0x80
+#define			APIC_TPRI_MASK		0xFFu
+#define		APIC_ARBPRI	0x90
+#define			APIC_ARBPRI_MASK	0xFFu
+#define		APIC_PROCPRI	0xA0
+#define		APIC_EOI	0xB0
+#define			APIC_EIO_ACK		0x0		/* Write this to the EOI register */
+#define		APIC_RRR	0xC0
+#define		APIC_LDR	0xD0
+#define			APIC_LDR_MASK		(0xFFu<<24)
+#define			GET_APIC_LOGICAL_ID(x)	(((x)>>24)&0xFFu)
+#define			SET_APIC_LOGICAL_ID(x)	(((x)<<24))
+#define			APIC_ALL_CPUS		0xFFu
+#define		APIC_DFR	0xE0
+#define			APIC_DFR_CLUSTER		0x0FFFFFFFul
+#define			APIC_DFR_FLAT			0xFFFFFFFFul
+#define		APIC_SPIV	0xF0
+#define			APIC_SPIV_FOCUS_DISABLED	(1<<9)
+#define			APIC_SPIV_APIC_ENABLED		(1<<8)
+#define		APIC_ISR	0x100
+#define		APIC_TMR	0x180
+#define 	APIC_IRR	0x200
+#define 	APIC_ESR	0x280
+#define			APIC_ESR_SEND_CS	0x00001
+#define			APIC_ESR_RECV_CS	0x00002
+#define			APIC_ESR_SEND_ACC	0x00004
+#define			APIC_ESR_RECV_ACC	0x00008
+#define			APIC_ESR_SENDILL	0x00020
+#define			APIC_ESR_RECVILL	0x00040
+#define			APIC_ESR_ILLREGA	0x00080
+#define		APIC_ICR	0x300
+#define			APIC_DEST_SELF		0x40000
+#define			APIC_DEST_ALLINC	0x80000
+#define			APIC_DEST_ALLBUT	0xC0000
+#define			APIC_ICR_RR_MASK	0x30000
+#define			APIC_ICR_RR_INVALID	0x00000
+#define			APIC_ICR_RR_INPROG	0x10000
+#define			APIC_ICR_RR_VALID	0x20000
+#define			APIC_INT_LEVELTRIG	0x08000
+#define			APIC_INT_ASSERT		0x04000
+#define			APIC_ICR_BUSY		0x01000
+#define			APIC_DEST_LOGICAL	0x00800
+#define			APIC_DEST_PHYSICAL	0x00000
+#define			APIC_DM_FIXED		0x00000
+#define			APIC_DM_LOWEST		0x00100
+#define			APIC_DM_SMI		0x00200
+#define			APIC_DM_REMRD		0x00300
+#define			APIC_DM_NMI		0x00400
+#define			APIC_DM_INIT		0x00500
+#define			APIC_DM_STARTUP		0x00600
+#define			APIC_DM_EXTINT		0x00700
+#define			APIC_VECTOR_MASK	0x000FF
+#define		APIC_ICR2	0x310
+#define			GET_APIC_DEST_FIELD(x)	(((x)>>24)&0xFF)
+#define			SET_APIC_DEST_FIELD(x)	((x)<<24)
+#define		APIC_LVTT	0x320
+#define		APIC_LVTTHMR	0x330
+#define		APIC_LVTPC	0x340
+#define		APIC_LVT0	0x350
+#define			APIC_LVT_TIMER_BASE_MASK	(0x3<<18)
+#define			GET_APIC_TIMER_BASE(x)		(((x)>>18)&0x3)
+#define			SET_APIC_TIMER_BASE(x)		(((x)<<18))
+#define			APIC_TIMER_BASE_CLKIN		0x0
+#define			APIC_TIMER_BASE_TMBASE		0x1
+#define			APIC_TIMER_BASE_DIV		0x2
+#define			APIC_LVT_TIMER_PERIODIC		(1<<17)
+#define			APIC_LVT_MASKED			(1<<16)
+#define			APIC_LVT_LEVEL_TRIGGER		(1<<15)
+#define			APIC_LVT_REMOTE_IRR		(1<<14)
+#define			APIC_INPUT_POLARITY		(1<<13)
+#define			APIC_SEND_PENDING		(1<<12)
+#define			APIC_MODE_MASK			0x700
+#define			GET_APIC_DELIVERY_MODE(x)	(((x)>>8)&0x7)
+#define			SET_APIC_DELIVERY_MODE(x,y)	(((x)&~0x700)|((y)<<8))
+#define				APIC_MODE_FIXED		0x0
+#define				APIC_MODE_NMI		0x4
+#define				APIC_MODE_EXINT		0x7
+#define 	APIC_LVT1	0x360
+#define		APIC_LVTERR	0x370
+#define		APIC_TMICT	0x380
+#define		APIC_TMCCT	0x390
+#define		APIC_TDCR	0x3E0
+#define			APIC_TDR_DIV_TMBASE	(1<<2)
+#define			APIC_TDR_DIV_1		0xB
+#define			APIC_TDR_DIV_2		0x0
+#define			APIC_TDR_DIV_4		0x1
+#define			APIC_TDR_DIV_8		0x2
+#define			APIC_TDR_DIV_16		0x3
+#define			APIC_TDR_DIV_32		0x8
+#define			APIC_TDR_DIV_64		0x9
+#define			APIC_TDR_DIV_128	0xA
+
+#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+
+#define MAX_IO_APICS 32
+
+/*
+ * All x86-64 systems are xAPIC compatible.
+ * In the following, "apicid" is a physical APIC ID.
+ */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CLUSTER(apicid)	((apicid) & XAPIC_DEST_CLUSTER_MASK)
+#define APIC_CLUSTERID(apicid)	(APIC_CLUSTER(apicid) >> XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
+#define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
+
+/*
+ * the local APIC register structure, memory mapped. Not terribly well
+ * tested, but we might eventually use this one in the future - the
+ * problem why we cannot use it right now is the P5 APIC, it has an
+ * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
+ */
+#define u32 unsigned int
+
+#define lapic ((volatile struct local_apic *)APIC_BASE)
+
+struct local_apic {
+
+/*000*/	struct { u32 __reserved[4]; } __reserved_01;
+
+/*010*/	struct { u32 __reserved[4]; } __reserved_02;
+
+/*020*/	struct { /* APIC ID Register */
+		u32   __reserved_1	: 24,
+			phys_apic_id	:  4,
+			__reserved_2	:  4;
+		u32 __reserved[3];
+	} id;
+
+/*030*/	const
+	struct { /* APIC Version Register */
+		u32   version		:  8,
+			__reserved_1	:  8,
+			max_lvt		:  8,
+			__reserved_2	:  8;
+		u32 __reserved[3];
+	} version;
+
+/*040*/	struct { u32 __reserved[4]; } __reserved_03;
+
+/*050*/	struct { u32 __reserved[4]; } __reserved_04;
+
+/*060*/	struct { u32 __reserved[4]; } __reserved_05;
+
+/*070*/	struct { u32 __reserved[4]; } __reserved_06;
+
+/*080*/	struct { /* Task Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} tpr;
+
+/*090*/	const
+	struct { /* Arbitration Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} apr;
+
+/*0A0*/	const
+	struct { /* Processor Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} ppr;
+
+/*0B0*/	struct { /* End Of Interrupt Register */
+		u32   eoi;
+		u32 __reserved[3];
+	} eoi;
+
+/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
+
+/*0D0*/	struct { /* Logical Destination Register */
+		u32   __reserved_1	: 24,
+			logical_dest	:  8;
+		u32 __reserved_2[3];
+	} ldr;
+
+/*0E0*/	struct { /* Destination Format Register */
+		u32   __reserved_1	: 28,
+			model		:  4;
+		u32 __reserved_2[3];
+	} dfr;
+
+/*0F0*/	struct { /* Spurious Interrupt Vector Register */
+		u32	spurious_vector	:  8,
+			apic_enabled	:  1,
+			focus_cpu	:  1,
+			__reserved_2	: 22;
+		u32 __reserved_3[3];
+	} svr;
+
+/*100*/	struct { /* In Service Register */
+/*170*/		u32 bitfield;
+		u32 __reserved[3];
+	} isr [8];
+
+/*180*/	struct { /* Trigger Mode Register */
+/*1F0*/		u32 bitfield;
+		u32 __reserved[3];
+	} tmr [8];
+
+/*200*/	struct { /* Interrupt Request Register */
+/*270*/		u32 bitfield;
+		u32 __reserved[3];
+	} irr [8];
+
+/*280*/	union { /* Error Status Register */
+		struct {
+			u32   send_cs_error			:  1,
+				receive_cs_error		:  1,
+				send_accept_error		:  1,
+				receive_accept_error		:  1,
+				__reserved_1			:  1,
+				send_illegal_vector		:  1,
+				receive_illegal_vector		:  1,
+				illegal_register_address	:  1,
+				__reserved_2			: 24;
+			u32 __reserved_3[3];
+		} error_bits;
+		struct {
+			u32 errors;
+			u32 __reserved_3[3];
+		} all_errors;
+	} esr;
+
+/*290*/	struct { u32 __reserved[4]; } __reserved_08;
+
+/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
+
+/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
+
+/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
+
+/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
+
+/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
+
+/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
+
+/*300*/	struct { /* Interrupt Command Register 1 */
+		u32   vector			:  8,
+			delivery_mode		:  3,
+			destination_mode	:  1,
+			delivery_status		:  1,
+			__reserved_1		:  1,
+			level			:  1,
+			trigger			:  1,
+			__reserved_2		:  2,
+			shorthand		:  2,
+			__reserved_3		:  12;
+		u32 __reserved_4[3];
+	} icr1;
+
+/*310*/	struct { /* Interrupt Command Register 2 */
+		union {
+			u32   __reserved_1	: 24,
+				phys_dest	:  4,
+				__reserved_2	:  4;
+			u32   __reserved_3	: 24,
+				logical_dest	:  8;
+		} dest;
+		u32 __reserved_4[3];
+	} icr2;
+
+/*320*/	struct { /* LVT - Timer */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			timer_mode	:  1,
+			__reserved_3	: 14;
+		u32 __reserved_4[3];
+	} lvt_timer;
+
+/*330*/	struct { /* LVT - Thermal Sensor */
+		u32  vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_thermal;
+
+/*340*/	struct { /* LVT - Performance Counter */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_pc;
+
+/*350*/	struct { /* LVT - LINT0 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint0;
+
+/*360*/	struct { /* LVT - LINT1 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint1;
+
+/*370*/	struct { /* LVT - Error */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_error;
+
+/*380*/	struct { /* Timer Initial Count Register */
+		u32   initial_count;
+		u32 __reserved_2[3];
+	} timer_icr;
+
+/*390*/	const
+	struct { /* Timer Current Count Register */
+		u32   curr_count;
+		u32 __reserved_2[3];
+	} timer_ccr;
+
+/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
+
+/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
+
+/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
+
+/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
+
+/*3E0*/	struct { /* Timer Divide Configuration Register */
+		u32   divisor		:  4,
+			__reserved_1	: 28;
+		u32 __reserved_2[3];
+	} timer_dcr;
+
+/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
+
+} __attribute__ ((packed));
+
+#undef u32
+
+#define BAD_APICID 0xFFu
+
+#endif
diff --git a/include/asm-x86_64/atomic.h b/include/asm-x86_64/atomic.h
new file mode 100644
index 000000000000..fc4c5956e1ea
--- /dev/null
+++ b/include/asm-x86_64/atomic.h
@@ -0,0 +1,381 @@
+#ifndef __ARCH_X86_64_ATOMIC__
+#define __ARCH_X86_64_ATOMIC__
+
+#include <linux/config.h>
+
+/* atomic_t should be 32 bit signed type */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK "lock ; "
+#else
+#define LOCK ""
+#endif
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically reads the value of @v.
+ */ 
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ * 
+ * Atomically sets the value of @v to @i.
+ */ 
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "addl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "subl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "subl %2,%0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically increments @v by 1.
+ */ 
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "incl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically decrements @v by 1.
+ */ 
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "decl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */ 
+static __inline__ int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "decl %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test 
+ * @v: pointer of type atomic_t
+ * 
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */ 
+static __inline__ int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "incl %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ * 
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */ 
+static __inline__ int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "addl %2,%0; sets %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/* An 64bit atomic type */
+
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ * Doesn't imply a read memory barrier.
+ */
+#define atomic64_read(v)		((v)->counter)
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic64_set(v,i)		(((v)->counter) = (i))
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic64_add(long i, atomic64_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "addq %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic64_sub(long i, atomic64_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "subq %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static __inline__ int atomic64_sub_and_test(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "subq %2,%0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+static __inline__ void atomic64_inc(atomic64_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "incq %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static __inline__ void atomic64_dec(atomic64_t *v)
+{
+	__asm__ __volatile__(
+		LOCK "decq %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static __inline__ int atomic64_dec_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "decq %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static __inline__ int atomic64_inc_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "incq %0; sete %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @v: pointer to atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static __inline__ long atomic64_add_negative(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	__asm__ __volatile__(
+		LOCK "addq %2,%0; sets %1"
+		:"=m" (v->counter), "=qm" (c)
+		:"ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+	int __i = i;
+	__asm__ __volatile__(
+		LOCK "xaddl %0, %1;"
+		:"=r"(i)
+		:"m"(v->counter), "0"(i));
+	return i + __i;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i,v);
+}
+
+#define atomic_inc_return(v)  (atomic_add_return(1,v))
+#define atomic_dec_return(v)  (atomic_sub_return(1,v))
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr) \
+__asm__ __volatile__(LOCK "andl %0,%1" \
+: : "r" (~(mask)),"m" (*addr) : "memory")
+
+#define atomic_set_mask(mask, addr) \
+__asm__ __volatile__(LOCK "orl %0,%1" \
+: : "r" ((unsigned)mask),"m" (*(addr)) : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif
diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h
new file mode 100644
index 000000000000..5dd7727c756b
--- /dev/null
+++ b/include/asm-x86_64/bitops.h
@@ -0,0 +1,418 @@
+#ifndef _X86_64_BITOPS_H
+#define _X86_64_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX "lock ; "
+#else
+#define LOCK_PREFIX ""
+#endif
+
+#define ADDR (*(volatile long *) addr)
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __set_bit(int nr, volatile void * addr)
+{
+	__asm__ volatile(
+		"btsl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void clear_bit(int nr, volatile void * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr));
+}
+
+static __inline__ void __clear_bit(int nr, volatile void * addr)
+{
+	__asm__ __volatile__(
+		"btrl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr));
+}
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __change_bit(int nr, volatile void * addr)
+{
+	__asm__ __volatile__(
+		"btcl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %1,%0"
+		:"=m" (ADDR)
+		:"dIr" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btsl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr));
+	return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__(
+		"btrl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr));
+	return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__( LOCK_PREFIX
+		"btcl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit),"=m" (ADDR)
+		:"dIr" (nr) : "memory");
+	return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile void * addr);
+#endif
+
+static __inline__ int constant_test_bit(int nr, const volatile void * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int variable_test_bit(int nr, volatile const void * addr)
+{
+	int oldbit;
+
+	__asm__ __volatile__(
+		"btl %2,%1\n\tsbbl %0,%0"
+		:"=r" (oldbit)
+		:"m" (ADDR),"dIr" (nr));
+	return oldbit;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+#undef ADDR
+
+extern long find_first_zero_bit(const unsigned long * addr, unsigned long size);
+extern long find_next_zero_bit (const unsigned long * addr, long size, long offset);
+extern long find_first_bit(const unsigned long * addr, unsigned long size);
+extern long find_next_bit(const unsigned long * addr, long size, long offset);
+
+/* return index of first bet set in val or max when no bit is set */
+static inline unsigned long __scanbit(unsigned long val, unsigned long max)
+{
+	asm("bsfq %1,%0 ; cmovz %2,%0" : "=&r" (val) : "r" (val), "r" (max));
+	return val;
+}
+
+#define find_first_bit(addr,size) \
+((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
+  (__scanbit(*(unsigned long *)addr,(size))) : \
+  find_first_bit(addr,size)))
+
+#define find_next_bit(addr,size,off) \
+((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? 	  \
+  ((off) + (__scanbit((*(unsigned long *)addr) >> (off),(size)-(off)))) : \
+	find_next_bit(addr,size,off)))
+
+#define find_first_zero_bit(addr,size) \
+((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
+  (__scanbit(~*(unsigned long *)addr,(size))) : \
+  	find_first_zero_bit(addr,size)))
+	
+#define find_next_zero_bit(addr,size,off) \
+((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? 	  \
+  ((off)+(__scanbit(~(((*(unsigned long *)addr)) >> (off)),(size)-(off)))) : \
+	find_next_zero_bit(addr,size,off)))
+
+/* 
+ * Find string of zero bits in a bitmap. -1 when not found.
+ */ 
+extern unsigned long 
+find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len);
+
+static inline void set_bit_string(unsigned long *bitmap, unsigned long i, 
+				  int len) 
+{ 
+	unsigned long end = i + len; 
+	while (i < end) {
+		__set_bit(i, bitmap); 
+		i++;
+	}
+} 
+
+static inline void __clear_bit_string(unsigned long *bitmap, unsigned long i, 
+				    int len) 
+{ 
+	unsigned long end = i + len; 
+	while (i < end) {
+		__clear_bit(i, bitmap); 
+		i++;
+	}
+} 
+
+/**
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	__asm__("bsfq %1,%0"
+		:"=r" (word)
+		:"r" (~word));
+	return word;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	__asm__("bsfq %1,%0"
+		:"=r" (word)
+		:"rm" (word));
+	return word;
+}
+
+#ifdef __KERNEL__
+
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+	if (b[0])
+		return __ffs(b[0]);
+	if (b[1])
+		return __ffs(b[1]) + 64;
+	if (b[2])
+		return __ffs(b[2]) + 128;
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	int r;
+
+	__asm__("bsfl %1,%0\n\t"
+		"cmovzl %2,%0" 
+		: "=r" (r) : "rm" (x), "r" (-1));
+	return r+1;
+}
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight64(x) generic_hweight64(x)
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_bit((nr),(unsigned long*)addr)
+#define ext2_set_bit_atomic(lock,nr,addr) \
+	        test_and_set_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_bit((nr),(unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+	        test_and_clear_bit((nr),(unsigned long*)addr)
+#define ext2_test_bit(nr, addr)      test_bit((nr),(unsigned long*)addr)
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	find_next_zero_bit((unsigned long*)addr, size, off)
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,(void*)addr)
+#define minix_set_bit(nr,addr) __set_bit(nr,(void*)addr)
+#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,(void*)addr)
+#define minix_test_bit(nr,addr) test_bit(nr,(void*)addr)
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_bit((void*)addr,size)
+
+/* find last set bit */
+#define fls(x) generic_fls(x)
+
+#define ARCH_HAS_ATOMIC_UNSIGNED 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _X86_64_BITOPS_H */
diff --git a/include/asm-x86_64/boot.h b/include/asm-x86_64/boot.h
new file mode 100644
index 000000000000..96b228e6e79c
--- /dev/null
+++ b/include/asm-x86_64/boot.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_BOOT_H
+#define _LINUX_BOOT_H
+
+/* Don't touch these, unless you really know what you're doing. */
+#define DEF_INITSEG	0x9000
+#define DEF_SYSSEG	0x1000
+#define DEF_SETUPSEG	0x9020
+#define DEF_SYSSIZE	0x7F00
+
+/* Internal svga startup constants */
+#define NORMAL_VGA	0xffff		/* 80x25 mode */
+#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
+#define ASK_VGA		0xfffd		/* ask for it at bootup */
+
+#endif
diff --git a/include/asm-x86_64/bootsetup.h b/include/asm-x86_64/bootsetup.h
new file mode 100644
index 000000000000..b570a484dc50
--- /dev/null
+++ b/include/asm-x86_64/bootsetup.h
@@ -0,0 +1,39 @@
+
+#ifndef _X86_64_BOOTSETUP_H
+#define _X86_64_BOOTSETUP_H 1
+
+extern char x86_boot_params[2048];
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM	((unsigned char *)x86_boot_params)
+#define SCREEN_INFO (*(struct screen_info *) (PARAM+0))
+#define EXT_MEM_K (*(unsigned short *) (PARAM+2))
+#define ALT_MEM_K (*(unsigned int *) (PARAM+0x1e0))
+#define E820_MAP_NR (*(char*) (PARAM+E820NR))
+#define E820_MAP    ((struct e820entry *) (PARAM+E820MAP))
+#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
+#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
+#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
+#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))
+#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8))
+#define SAVED_VIDEO_MODE (*(unsigned short *) (PARAM+0x1FA))
+#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC))
+#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF))
+#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210))
+#define KERNEL_START (*(unsigned int *) (PARAM+0x214))
+#define INITRD_START (*(unsigned int *) (PARAM+0x218))
+#define INITRD_SIZE (*(unsigned int *) (PARAM+0x21c))
+#define EDID_INFO (*(struct edid_info *) (PARAM+0x140))
+#define EDD_NR     (*(unsigned char *) (PARAM+EDDNR))
+#define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF))
+#define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF))
+#define EDD_BUF     ((struct edd_info *) (PARAM+EDDBUF))
+#define COMMAND_LINE saved_command_line
+
+#define RAMDISK_IMAGE_START_MASK  	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000	
+
+#endif
diff --git a/include/asm-x86_64/bug.h b/include/asm-x86_64/bug.h
new file mode 100644
index 000000000000..d2032f56e87c
--- /dev/null
+++ b/include/asm-x86_64/bug.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_X8664_BUG_H
+#define __ASM_X8664_BUG_H 1
+
+#include <linux/stringify.h>
+
+/*
+ * Tell the user there is some problem.  The exception handler decodes 
+ * this frame.
+ */
+struct bug_frame {
+       unsigned char ud2[2];
+	/* should use 32bit offset instead, but the assembler doesn't 
+	   like it */
+	char *filename;
+	unsigned short line;
+} __attribute__((packed));
+
+#define HAVE_ARCH_BUG
+#define BUG() \
+	asm volatile("ud2 ; .quad %c1 ; .short %c0" :: \
+		     "i"(__LINE__), "i" (__stringify(KBUILD_BASENAME)))
+void out_of_line_bug(void);
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-x86_64/bugs.h b/include/asm-x86_64/bugs.h
new file mode 100644
index 000000000000..59bc68925d0f
--- /dev/null
+++ b/include/asm-x86_64/bugs.h
@@ -0,0 +1,29 @@
+/*
+ *  include/asm-x86_64/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ *  Copyright (C) 2000  SuSE
+ *
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/pda.h>
+
+extern void alternative_instructions(void);
+
+static void __init check_bugs(void)
+{
+	identify_cpu(&boot_cpu_data);
+#if !defined(CONFIG_SMP)
+	printk("CPU: ");
+	print_cpu_info(&boot_cpu_data);
+#endif
+	alternative_instructions(); 
+}
diff --git a/include/asm-x86_64/byteorder.h b/include/asm-x86_64/byteorder.h
new file mode 100644
index 000000000000..5e86c868c75e
--- /dev/null
+++ b/include/asm-x86_64/byteorder.h
@@ -0,0 +1,33 @@
+#ifndef _X86_64_BYTEORDER_H
+#define _X86_64_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	__asm__("bswapq %0" : "=r" (x) : "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__("bswapl %0" : "=r" (x) : "0" (x));
+	return x;
+}
+
+/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
+   convert it into rotation or exhange.  */
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab64(x) ___arch__swab64(x)
+
+#endif /* __GNUC__ */
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _X86_64_BYTEORDER_H */
diff --git a/include/asm-x86_64/cache.h b/include/asm-x86_64/cache.h
new file mode 100644
index 000000000000..eda62bae1240
--- /dev/null
+++ b/include/asm-x86_64/cache.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-x8664/cache.h
+ */
+#ifndef __ARCH_X8664_CACHE_H
+#define __ARCH_X8664_CACHE_H
+
+#include <linux/config.h>
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+#define L1_CACHE_SHIFT_MAX 6	/* largest L1 which this arch supports */
+
+#endif
diff --git a/include/asm-x86_64/cacheflush.h b/include/asm-x86_64/cacheflush.h
new file mode 100644
index 000000000000..b3189fb229d1
--- /dev/null
+++ b/include/asm-x86_64/cacheflush.h
@@ -0,0 +1,30 @@
+#ifndef _X8664_CACHEFLUSH_H
+#define _X8664_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the intel. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+void global_flush_tlb(void); 
+int change_page_attr(struct page *page, int numpages, pgprot_t prot);
+int change_page_attr_addr(unsigned long addr, int numpages, pgprot_t prot);
+
+#endif /* _X8664_CACHEFLUSH_H */
diff --git a/include/asm-x86_64/calling.h b/include/asm-x86_64/calling.h
new file mode 100644
index 000000000000..0bc12655fa5b
--- /dev/null
+++ b/include/asm-x86_64/calling.h
@@ -0,0 +1,156 @@
+/* 
+ * Some macros to handle stack frames in assembly.
+ */ 
+
+#include <linux/config.h>
+
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11 48
+#define R10 56	
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+#define ORIG_RAX 120       /* + error_code */ 
+/* end of arguments */ 	
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#define ARGOFFSET R11
+#define SWFRAME ORIG_RAX
+
+	.macro SAVE_ARGS addskip=0,norcx=0,nor891011=0
+	subq  $9*8+\addskip,%rsp
+	CFI_ADJUST_CFA_OFFSET	9*8+\addskip
+	movq  %rdi,8*8(%rsp) 
+	CFI_REL_OFFSET	rdi,8*8
+	movq  %rsi,7*8(%rsp) 
+	CFI_REL_OFFSET	rsi,7*8
+	movq  %rdx,6*8(%rsp)
+	CFI_REL_OFFSET	rdx,6*8
+	.if \norcx
+	.else
+	movq  %rcx,5*8(%rsp)
+	CFI_REL_OFFSET	rcx,5*8
+	.endif
+	movq  %rax,4*8(%rsp) 
+	CFI_REL_OFFSET	rax,4*8
+	.if \nor891011
+	.else
+	movq  %r8,3*8(%rsp) 
+	CFI_REL_OFFSET	r8,3*8
+	movq  %r9,2*8(%rsp) 
+	CFI_REL_OFFSET	r9,2*8
+	movq  %r10,1*8(%rsp) 
+	CFI_REL_OFFSET	r10,1*8
+	movq  %r11,(%rsp) 
+	CFI_REL_OFFSET	r11,0*8
+	.endif
+	.endm
+
+#define ARG_SKIP 9*8
+	.macro RESTORE_ARGS skiprax=0,addskip=0,skiprcx=0,skipr11=0,skipr8910=0,skiprdx=0
+	.if \skipr11
+	.else
+	movq (%rsp),%r11
+	.endif
+	.if \skipr8910
+	.else
+	movq 1*8(%rsp),%r10
+	movq 2*8(%rsp),%r9
+	movq 3*8(%rsp),%r8
+	.endif
+	.if \skiprax
+	.else
+	movq 4*8(%rsp),%rax
+	.endif
+	.if \skiprcx
+	.else
+	movq 5*8(%rsp),%rcx
+	.endif
+	.if \skiprdx
+	.else
+	movq 6*8(%rsp),%rdx
+	.endif
+	movq 7*8(%rsp),%rsi
+	movq 8*8(%rsp),%rdi
+	.if ARG_SKIP+\addskip > 0
+	addq $ARG_SKIP+\addskip,%rsp
+	CFI_ADJUST_CFA_OFFSET	-(ARG_SKIP+\addskip)
+	.endif
+	.endm	
+
+	.macro LOAD_ARGS offset
+	movq \offset(%rsp),%r11
+	movq \offset+8(%rsp),%r10
+	movq \offset+16(%rsp),%r9
+	movq \offset+24(%rsp),%r8
+	movq \offset+40(%rsp),%rcx
+	movq \offset+48(%rsp),%rdx
+	movq \offset+56(%rsp),%rsi
+	movq \offset+64(%rsp),%rdi
+	movq \offset+72(%rsp),%rax
+	.endm
+			
+#define REST_SKIP 6*8			
+	.macro SAVE_REST
+	subq $REST_SKIP,%rsp
+	CFI_ADJUST_CFA_OFFSET	REST_SKIP
+	movq %rbx,5*8(%rsp) 
+	CFI_REL_OFFSET	rbx,5*8
+	movq %rbp,4*8(%rsp) 
+	CFI_REL_OFFSET	rbp,4*8
+	movq %r12,3*8(%rsp) 
+	CFI_REL_OFFSET	r12,3*8
+	movq %r13,2*8(%rsp) 
+	CFI_REL_OFFSET	r13,2*8
+	movq %r14,1*8(%rsp) 
+	CFI_REL_OFFSET	r14,1*8
+	movq %r15,(%rsp) 
+	CFI_REL_OFFSET	r15,0*8
+	.endm		
+
+	.macro RESTORE_REST
+	movq (%rsp),%r15
+	movq 1*8(%rsp),%r14
+	movq 2*8(%rsp),%r13
+	movq 3*8(%rsp),%r12
+	movq 4*8(%rsp),%rbp
+	movq 5*8(%rsp),%rbx
+	addq $REST_SKIP,%rsp
+	CFI_ADJUST_CFA_OFFSET	-(REST_SKIP)
+	.endm
+		
+	.macro SAVE_ALL
+	SAVE_ARGS
+	SAVE_REST
+	.endm
+		
+	.macro RESTORE_ALL addskip=0
+	RESTORE_REST
+	RESTORE_ARGS 0,\addskip
+	.endm
+
+	.macro icebp
+	.byte 0xf1
+	.endm
+
+#ifdef CONFIG_FRAME_POINTER
+#define ENTER enter
+#define LEAVE leave
+#else
+#define ENTER
+#define LEAVE
+#endif
diff --git a/include/asm-x86_64/checksum.h b/include/asm-x86_64/checksum.h
new file mode 100644
index 000000000000..d01356f01448
--- /dev/null
+++ b/include/asm-x86_64/checksum.h
@@ -0,0 +1,193 @@
+#ifndef _X86_64_CHECKSUM_H
+#define _X86_64_CHECKSUM_H
+
+/* 
+ * Checksums for x86-64 
+ * Copyright 2002 by Andi Kleen, SuSE Labs 
+ * with some code from asm-i386/checksum.h
+ */ 
+
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+/** 
+ * csum_fold - Fold and invert a 32bit checksum.
+ * sum: 32bit unfolded sum
+ * 
+ * Fold a 32bit running checksum to 16bit and invert it. This is usually
+ * the last step before putting a checksum into a packet.
+ * Make sure not to mix with 64bit checksums.
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+	__asm__(
+		"  addl %1,%0\n"
+		"  adcl $0xffff,%0"
+		: "=r" (sum)
+		: "r" (sum << 16), "0" (sum & 0xffff0000)
+	);
+	return (~sum) >> 16;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+
+/**
+ * ip_fast_csum - Compute the IPv4 header checksum efficiently.
+ * iph: ipv4 header
+ * ihl: length of header / 4
+ */ 
+static inline unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) 
+{
+	unsigned int sum;
+
+	asm(	"  movl (%1), %0\n"
+		"  subl $4, %2\n"
+		"  jbe 2f\n"
+		"  addl 4(%1), %0\n"
+		"  adcl 8(%1), %0\n"
+		"  adcl 12(%1), %0\n"
+		"1: adcl 16(%1), %0\n"
+		"  lea 4(%1), %1\n"
+		"  decl %2\n"
+		"  jne	1b\n"
+		"  adcl $0, %0\n"
+		"  movl %0, %2\n"
+		"  shrl $16, %0\n"
+		"  addw %w2, %w0\n"
+		"  adcl $0, %0\n"
+		"  notl %0\n"
+		"2:"
+	/* Since the input registers which are loaded with iph and ipl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl)
+	: "1" (iph), "2" (ihl)
+	: "memory");
+	return(sum);
+}
+
+/** 
+ * csum_tcpup_nofold - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded) 
+ * 
+ * Returns the pseudo header checksum the input data. Result is 
+ * 32bit unfolded.
+ */
+static inline unsigned long 
+csum_tcpudp_nofold(unsigned saddr, unsigned daddr, unsigned short len,
+		   unsigned short proto, unsigned int sum) 
+{
+	asm("  addl %1, %0\n"
+	    "  adcl %2, %0\n"
+	    "  adcl %3, %0\n"
+	    "  adcl $0, %0\n"
+		: "=r" (sum)
+	    : "g" (daddr), "g" (saddr), "g" ((ntohs(len)<<16)+proto*256), "0" (sum));
+    return sum;
+}
+
+
+/** 
+ * csum_tcpup_magic - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded) 
+ * 
+ * Returns the 16bit pseudo header checksum the input data already
+ * complemented and ready to be filled in.
+ */
+static inline unsigned short int 
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
+		  unsigned short len, unsigned short proto, unsigned int sum) 
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/** 
+ * csum_partial - Compute an internet checksum.
+ * @buff: buffer to be checksummed
+ * @len: length of buffer.
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the 32bit unfolded internet checksum of the buffer.
+ * Before filling it in it needs to be csum_fold()'ed.
+ * buff should be aligned to a 64bit boundary if possible.
+ */ 
+extern unsigned int csum_partial(const unsigned char *buff, unsigned len, unsigned int sum);
+
+#define  _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
+#define HAVE_CSUM_COPY_USER 1
+
+
+/* Do not call this directly. Use the wrappers below */
+extern unsigned long csum_partial_copy_generic(const unsigned char *src, const unsigned char *dst,
+					       unsigned len,
+					       unsigned sum, 
+					       int *src_err_ptr, int *dst_err_ptr);
+
+
+extern unsigned int csum_partial_copy_from_user(const unsigned char __user *src, unsigned char *dst,
+				       int len, unsigned int isum, int *errp);
+extern unsigned int csum_partial_copy_to_user(const unsigned char *src, unsigned char __user *dst,
+				      int len, unsigned int isum, int *errp);
+extern unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst, int len,
+					      unsigned int sum);
+
+/* Old names. To be removed. */
+#define csum_and_copy_to_user csum_partial_copy_to_user
+#define csum_and_copy_from_user csum_partial_copy_from_user
+
+/** 
+ * ip_compute_csum - Compute an 16bit IP checksum.
+ * @buff: buffer address.
+ * @len: length of buffer.
+ *
+ * Returns the 16bit folded/inverted checksum of the passed buffer.
+ * Ready to fill in.
+ */
+extern unsigned short ip_compute_csum(unsigned char * buff, int len);
+
+/**
+ * csum_ipv6_magic - Compute checksum of an IPv6 pseudo header.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: protocol of packet
+ * @sum: initial sum (32bit unfolded) to be added in
+ *
+ * Computes an IPv6 pseudo header checksum. This sum is added the checksum 
+ * into UDP/TCP packets and contains some link layer information.
+ * Returns the unfolded 32bit checksum.
+ */
+
+struct in6_addr;
+
+#define _HAVE_ARCH_IPV6_CSUM 1
+extern unsigned short 
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
+		__u32 len, unsigned short proto, unsigned int sum);
+
+static inline unsigned add32_with_carry(unsigned a, unsigned b)
+{
+	asm("addl %2,%0\n\t"
+	    "adcl $0,%0" 
+	    : "=r" (a) 
+	    : "0" (a), "r" (b));
+	return a;
+}
+
+#endif
+
diff --git a/include/asm-x86_64/compat.h b/include/asm-x86_64/compat.h
new file mode 100644
index 000000000000..d0f453c5adfc
--- /dev/null
+++ b/include/asm-x86_64/compat.h
@@ -0,0 +1,205 @@
+#ifndef _ASM_X86_64_COMPAT_H
+#define _ASM_X86_64_COMPAT_H
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		compat_uid_t;
+typedef u16		compat_gid_t;
+typedef u32		compat_uid32_t;
+typedef u32		compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_timer_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32               compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	compat_uid32_t uid;
+	compat_gid32_t gid;
+	compat_uid32_t cuid;
+	compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static __inline__ void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = (void *)current->thread.rsp0 - sizeof(struct pt_regs); 
+	return (void __user *)regs->rsp - len; 
+}
+
+#endif /* _ASM_X86_64_COMPAT_H */
diff --git a/include/asm-x86_64/cpu.h b/include/asm-x86_64/cpu.h
new file mode 100644
index 000000000000..8eea076525a4
--- /dev/null
+++ b/include/asm-x86_64/cpu.h
@@ -0,0 +1 @@
+#include <asm-i386/cpu.h>
diff --git a/include/asm-x86_64/cpufeature.h b/include/asm-x86_64/cpufeature.h
new file mode 100644
index 000000000000..0e47a6d53726
--- /dev/null
+++ b/include/asm-x86_64/cpufeature.h
@@ -0,0 +1,104 @@
+/*
+ * cpufeature.h
+ *
+ * Defines x86 CPU feature bits
+ */
+
+#ifndef __ASM_X8664_CPUFEATURE_H
+#define __ASM_X8664_CPUFEATURE_H
+
+#define NCAPINTS	6
+
+/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
+#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE 	(0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
+#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
+#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLSH	(0*32+19) /* Supports the CLFLUSH instruction */
+#define X86_FEATURE_DTES	(0*32+21) /* Debug Trace Store */
+#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
+				          /* of FPU context), and CR4.OSFXSR available */
+#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
+#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
+#define X86_FEATURE_SELFSNOOP	(0*32+27) /* CPU self snoop */
+#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC		(0*32+29) /* Automatic clock control */
+#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_FXSR_OPT	(1*32+25) /* FXSR optimizations */
+#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
+#define X86_FEATURE_K8_C	(3*32+ 4) /* C stepping K8 */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
+#define X86_FEATURE_MWAIT	(4*32+ 3) /* Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	(4*32+ 4) /* CPL Qualified Debug Store */
+#define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_CID		(4*32+10) /* Context ID */
+#define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 5 */
+#define X86_FEATURE_LAHF_LM	(5*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY	(5*32+ 1) /* If yes HyperThreading not valid */
+
+#define cpu_has(c, bit)                test_bit(bit, (c)->x86_capability)
+#define boot_cpu_has(bit)      test_bit(bit, boot_cpu_data.x86_capability)
+
+#define cpu_has_fpu            1
+#define cpu_has_vme            0
+#define cpu_has_de             1
+#define cpu_has_pse            1
+#define cpu_has_tsc            1
+#define cpu_has_pae            ___BUG___
+#define cpu_has_pge            1
+#define cpu_has_apic           boot_cpu_has(X86_FEATURE_APIC)
+#define cpu_has_mtrr           1
+#define cpu_has_mmx            1
+#define cpu_has_fxsr           1
+#define cpu_has_xmm            1
+#define cpu_has_xmm2           1
+#define cpu_has_xmm3           boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_ht             boot_cpu_has(X86_FEATURE_HT)
+#define cpu_has_mp             1 /* XXX */
+#define cpu_has_k6_mtrr        0
+#define cpu_has_cyrix_arr      0
+#define cpu_has_centaur_mcr    0
+#define cpu_has_clflush	       boot_cpu_has(X86_FEATURE_CLFLSH)
+
+#endif /* __ASM_X8664_CPUFEATURE_H */
diff --git a/include/asm-x86_64/cputime.h b/include/asm-x86_64/cputime.h
new file mode 100644
index 000000000000..a07012dc5a3c
--- /dev/null
+++ b/include/asm-x86_64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __X86_64_CPUTIME_H
+#define __X86_64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __X86_64_CPUTIME_H */
diff --git a/include/asm-x86_64/current.h b/include/asm-x86_64/current.h
new file mode 100644
index 000000000000..7db560ee6f70
--- /dev/null
+++ b/include/asm-x86_64/current.h
@@ -0,0 +1,27 @@
+#ifndef _X86_64_CURRENT_H
+#define _X86_64_CURRENT_H
+
+#if !defined(__ASSEMBLY__) 
+struct task_struct;
+
+#include <asm/pda.h>
+
+static inline struct task_struct *get_current(void) 
+{ 
+	struct task_struct *t = read_pda(pcurrent); 
+	return t;
+} 
+
+#define current get_current()
+
+#else
+
+#ifndef ASM_OFFSET_H
+#include <asm/offset.h> 
+#endif
+
+#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+
+#endif
+
+#endif /* !(_X86_64_CURRENT_H) */
diff --git a/include/asm-x86_64/debugreg.h b/include/asm-x86_64/debugreg.h
new file mode 100644
index 000000000000..bd1aab1d8c4a
--- /dev/null
+++ b/include/asm-x86_64/debugreg.h
@@ -0,0 +1,65 @@
+#ifndef _X86_64_DEBUGREG_H
+#define _X86_64_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+   We can slow the instruction pipeline for instructions coming via the
+   gdt or the ldt if we want to.  I am not sure why this is an advantage */
+
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
+#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
+
+#endif
diff --git a/include/asm-x86_64/delay.h b/include/asm-x86_64/delay.h
new file mode 100644
index 000000000000..65f64acc5319
--- /dev/null
+++ b/include/asm-x86_64/delay.h
@@ -0,0 +1,27 @@
+#ifndef _X8664_DELAY_H
+#define _X8664_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/x86_64/lib/delay.c
+ */
+ 
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long usecs);
+extern void __const_udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+       ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+       __ndelay(n))
+
+
+#endif /* defined(_X8664_DELAY_H) */
diff --git a/include/asm-x86_64/desc.h b/include/asm-x86_64/desc.h
new file mode 100644
index 000000000000..6aefb9c0280d
--- /dev/null
+++ b/include/asm-x86_64/desc.h
@@ -0,0 +1,217 @@
+/* Written 2000 by Andi Kleen */ 
+#ifndef __ARCH_DESC_H
+#define __ARCH_DESC_H
+
+#include <linux/threads.h>
+#include <asm/ldt.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/string.h>
+#include <asm/segment.h>
+#include <asm/mmu.h>
+
+// 8 byte segment descriptor
+struct desc_struct { 
+	u16 limit0;
+	u16 base0;
+	unsigned base1 : 8, type : 4, s : 1, dpl : 2, p : 1;
+	unsigned limit : 4, avl : 1, l : 1, d : 1, g : 1, base2 : 8;
+} __attribute__((packed)); 
+
+struct n_desc_struct { 
+	unsigned int a,b;
+}; 	
+
+extern struct desc_struct cpu_gdt_table[NR_CPUS][GDT_ENTRIES];
+
+enum { 
+	GATE_INTERRUPT = 0xE, 
+	GATE_TRAP = 0xF, 	
+	GATE_CALL = 0xC,
+}; 	
+
+// 16byte gate
+struct gate_struct {          
+	u16 offset_low;
+	u16 segment; 
+	unsigned ist : 3, zero0 : 5, type : 5, dpl : 2, p : 1;
+	u16 offset_middle;
+	u32 offset_high;
+	u32 zero1; 
+} __attribute__((packed));
+
+#define PTR_LOW(x) ((unsigned long)(x) & 0xFFFF) 
+#define PTR_MIDDLE(x) (((unsigned long)(x) >> 16) & 0xFFFF)
+#define PTR_HIGH(x) ((unsigned long)(x) >> 32)
+
+enum { 
+	DESC_TSS = 0x9,
+	DESC_LDT = 0x2,
+}; 
+
+// LDT or TSS descriptor in the GDT. 16 bytes.
+struct ldttss_desc { 
+	u16 limit0;
+	u16 base0;
+	unsigned base1 : 8, type : 5, dpl : 2, p : 1;
+	unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
+	u32 base3;
+	u32 zero1; 
+} __attribute__((packed)); 
+
+struct desc_ptr {
+	unsigned short size;
+	unsigned long address;
+} __attribute__((packed)) ;
+
+#define load_TR_desc() asm volatile("ltr %w0"::"r" (GDT_ENTRY_TSS*8))
+#define load_LDT_desc() asm volatile("lldt %w0"::"r" (GDT_ENTRY_LDT*8))
+#define clear_LDT()  asm volatile("lldt %w0"::"r" (0))
+
+/*
+ * This is the ldt that every process will get unless we need
+ * something other than this.
+ */
+extern struct desc_struct default_ldt[];
+extern struct gate_struct idt_table[]; 
+
+static inline void _set_gate(void *adr, unsigned type, unsigned long func, unsigned dpl, unsigned ist)  
+{
+	struct gate_struct s; 	
+	s.offset_low = PTR_LOW(func); 
+	s.segment = __KERNEL_CS;
+	s.ist = ist; 
+	s.p = 1;
+	s.dpl = dpl; 
+	s.zero0 = 0;
+	s.zero1 = 0; 
+	s.type = type; 
+	s.offset_middle = PTR_MIDDLE(func); 
+	s.offset_high = PTR_HIGH(func); 
+	/* does not need to be atomic because it is only done once at setup time */ 
+	memcpy(adr, &s, 16); 
+} 
+
+static inline void set_intr_gate(int nr, void *func) 
+{ 
+	_set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, 0); 
+} 
+
+static inline void set_intr_gate_ist(int nr, void *func, unsigned ist) 
+{ 
+	_set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, ist); 
+} 
+
+static inline void set_system_gate(int nr, void *func) 
+{ 
+	_set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 3, 0); 
+} 
+
+static inline void set_tssldt_descriptor(void *ptr, unsigned long tss, unsigned type, 
+					 unsigned size) 
+{ 
+	struct ldttss_desc d;
+	memset(&d,0,sizeof(d)); 
+	d.limit0 = size & 0xFFFF;
+	d.base0 = PTR_LOW(tss); 
+	d.base1 = PTR_MIDDLE(tss) & 0xFF; 
+	d.type = type;
+	d.p = 1; 
+	d.limit1 = (size >> 16) & 0xF;
+	d.base2 = (PTR_MIDDLE(tss) >> 8) & 0xFF; 
+	d.base3 = PTR_HIGH(tss); 
+	memcpy(ptr, &d, 16); 
+}
+
+static inline void set_tss_desc(unsigned cpu, void *addr)
+{ 
+	set_tssldt_descriptor(&cpu_gdt_table[cpu][GDT_ENTRY_TSS], (unsigned long)addr, 
+			      DESC_TSS,
+			      sizeof(struct tss_struct) - 1);
+} 
+
+static inline void set_ldt_desc(unsigned cpu, void *addr, int size)
+{ 
+	set_tssldt_descriptor(&cpu_gdt_table[cpu][GDT_ENTRY_LDT], (unsigned long)addr, 
+			      DESC_LDT, size * 8 - 1);
+}
+
+static inline void set_seg_base(unsigned cpu, int entry, void *base)
+{ 
+	struct desc_struct *d = &cpu_gdt_table[cpu][entry];
+	u32 addr = (u32)(u64)base;
+	BUG_ON((u64)base >> 32); 
+	d->base0 = addr & 0xffff;
+	d->base1 = (addr >> 16) & 0xff;
+	d->base2 = (addr >> 24) & 0xff;
+} 
+
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+/* Don't allow setting of the lm bit. It is useless anyways because 
+   64bit system calls require __USER_CS. */ 
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	/* ((info)->lm << 21) | */ \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	&& \
+	(info)->lm		== 0)
+
+#if TLS_SIZE != 24
+# error update this code.
+#endif
+
+static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
+{
+	u64 *gdt = (u64 *)(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN);
+	gdt[0] = t->tls_array[0];
+	gdt[1] = t->tls_array[1];
+	gdt[2] = t->tls_array[2];
+} 
+
+/*
+ * load one particular LDT into the current CPU
+ */
+extern inline void load_LDT_nolock (mm_context_t *pc, int cpu)
+{
+	int count = pc->size;
+
+	if (likely(!count)) {
+		clear_LDT();
+		return;
+	}
+		
+	set_ldt_desc(cpu, pc->ldt, count);
+	load_LDT_desc();
+}
+
+static inline void load_LDT(mm_context_t *pc)
+{
+	int cpu = get_cpu();
+	load_LDT_nolock(pc, cpu);
+	put_cpu();
+}
+
+extern struct desc_ptr idt_descr;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-x86_64/div64.h b/include/asm-x86_64/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-x86_64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86_64/dma-mapping.h
new file mode 100644
index 000000000000..a416dc31634a
--- /dev/null
+++ b/include/asm-x86_64/dma-mapping.h
@@ -0,0 +1,138 @@
+#ifndef _X8664_DMA_MAPPING_H
+#define _X8664_DMA_MAPPING_H 1
+
+/*
+ * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
+ * documentation.
+ */
+
+#include <linux/config.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/swiotlb.h>
+
+extern dma_addr_t bad_dma_address;
+#define dma_mapping_error(x) \
+	(swiotlb ? swiotlb_dma_mapping_error(x) : ((x) == bad_dma_address))
+
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+			 unsigned gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+			 dma_addr_t dma_handle);
+
+#ifdef CONFIG_GART_IOMMU
+
+extern dma_addr_t dma_map_single(struct device *hwdev, void *ptr, size_t size,
+				 int direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t addr,size_t size,
+			     int direction);
+
+#else
+
+/* No IOMMU */
+
+static inline dma_addr_t dma_map_single(struct device *hwdev, void *ptr,
+					size_t size, int direction)
+{
+	dma_addr_t addr;
+
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+	addr = virt_to_bus(ptr);
+
+	if ((addr+size) & ~*hwdev->dma_mask)
+		out_of_line_bug();
+	return addr;
+}
+
+static inline void dma_unmap_single(struct device *hwdev, dma_addr_t dma_addr,
+				    size_t size, int direction)
+{
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+	/* Nothing to do */
+}
+
+#endif
+
+#define dma_map_page(dev,page,offset,size,dir) \
+	dma_map_single((dev), page_address(page)+(offset), (size), (dir))
+
+static inline void dma_sync_single_for_cpu(struct device *hwdev,
+					       dma_addr_t dma_handle,
+					       size_t size, int direction)
+{
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_single_for_cpu(hwdev,dma_handle,size,direction);
+
+	flush_write_buffers();
+}
+
+static inline void dma_sync_single_for_device(struct device *hwdev,
+						  dma_addr_t dma_handle,
+						  size_t size, int direction)
+{
+        if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_single_for_device(hwdev,dma_handle,size,direction);
+
+	flush_write_buffers();
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *hwdev,
+				       struct scatterlist *sg,
+				       int nelems, int direction)
+{
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_sg_for_cpu(hwdev,sg,nelems,direction);
+
+	flush_write_buffers();
+}
+
+static inline void dma_sync_sg_for_device(struct device *hwdev,
+					  struct scatterlist *sg,
+					  int nelems, int direction)
+{
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_sg_for_device(hwdev,sg,nelems,direction);
+
+	flush_write_buffers();
+}
+
+extern int dma_map_sg(struct device *hwdev, struct scatterlist *sg,
+		      int nents, int direction);
+extern void dma_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			 int nents, int direction);
+
+#define dma_unmap_page dma_unmap_single
+
+extern int dma_supported(struct device *hwdev, u64 mask);
+extern int dma_get_cache_alignment(void);
+#define dma_is_consistent(h) 1
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+static inline void dma_cache_sync(void *vaddr, size_t size, enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
+#endif
diff --git a/include/asm-x86_64/dma.h b/include/asm-x86_64/dma.h
new file mode 100644
index 000000000000..16fa3a064d0c
--- /dev/null
+++ b/include/asm-x86_64/dma.h
@@ -0,0 +1,298 @@
+/* $Id: dma.h,v 1.1.1.1 2001/04/19 20:00:38 ak Exp $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <asm/io.h>		/* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-x86_64/dwarf2.h b/include/asm-x86_64/dwarf2.h
new file mode 100644
index 000000000000..afd4212e860b
--- /dev/null
+++ b/include/asm-x86_64/dwarf2.h
@@ -0,0 +1,42 @@
+#ifndef _DWARF2_H
+#define _DWARF2_H 1
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+#warning "asm/dwarf2.h should be only included in pure assembly files"
+#endif
+
+/* 
+   Macros for dwarf2 CFI unwind table entries.
+   See "as.info" for details on these pseudo ops. Unfortunately 
+   they are only supported in very new binutils, so define them 
+   away for older version. 
+ */
+
+#ifdef CONFIG_DEBUG_INFO
+
+#define CFI_STARTPROC .cfi_startproc
+#define CFI_ENDPROC .cfi_endproc
+#define CFI_DEF_CFA .cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
+#define CFI_OFFSET .cfi_offset
+#define CFI_REL_OFFSET .cfi_rel_offset
+
+#else
+
+/* use assembler line comment character # to ignore the arguments. */
+#define CFI_STARTPROC	#
+#define CFI_ENDPROC	#
+#define CFI_DEF_CFA	#
+#define CFI_DEF_CFA_REGISTER	#
+#define CFI_DEF_CFA_OFFSET	#
+#define CFI_ADJUST_CFA_OFFSET	#
+#define CFI_OFFSET	#
+#define CFI_REL_OFFSET	#
+
+#endif
+
+#endif
diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h
new file mode 100644
index 000000000000..5b376e42b153
--- /dev/null
+++ b/include/asm-x86_64/e820.h
@@ -0,0 +1,59 @@
+/*
+ * structures and definitions for the int 15, ax=e820 memory map
+ * scheme.
+ *
+ * In a nutshell, setup.S populates a scratch table in the
+ * empty_zero_block that contains a list of usable address/size
+ * duples.  setup.c, this information is transferred into the e820map,
+ * and in init.c/numa.c, that new information is used to mark pages
+ * reserved or not.
+ */
+#ifndef __E820_HEADER
+#define __E820_HEADER
+
+#include <linux/mmzone.h>
+
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	32		/* number of entries in E820MAP */
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3 /* usable as RAM once ACPI tables have been read */
+#define E820_NVS	4
+
+#define HIGH_MEMORY	(1024*1024)
+
+#define LOWMEMSIZE()	(0x9f000)
+
+#ifndef __ASSEMBLY__
+struct e820entry {
+	u64 addr;	/* start of memory segment */
+	u64 size;	/* size of memory segment */
+	u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+    int nr_map;
+	struct e820entry map[E820MAX];
+};
+
+extern unsigned long find_e820_area(unsigned long start, unsigned long end, 
+				    unsigned size);
+extern void add_memory_region(unsigned long start, unsigned long size, 
+			      int type);
+extern void setup_memory_region(void);
+extern void contig_e820_setup(void); 
+extern unsigned long e820_end_of_ram(void);
+extern void e820_reserve_resources(void);
+extern void e820_print_map(char *who);
+extern int e820_mapped(unsigned long start, unsigned long end, unsigned type);
+
+extern void e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end);
+
+extern void __init parse_memopt(char *p, char **end);
+
+extern struct e820map e820;
+#endif/*!__ASSEMBLY__*/
+
+#endif/*__E820_HEADER*/
diff --git a/include/asm-x86_64/elf.h b/include/asm-x86_64/elf.h
new file mode 100644
index 000000000000..a60a35e79222
--- /dev/null
+++ b/include/asm-x86_64/elf.h
@@ -0,0 +1,160 @@
+#ifndef __ASM_X86_64_ELF_H
+#define __ASM_X86_64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/processor.h>
+
+/* x86-64 relocation types */
+#define R_X86_64_NONE		0	/* No reloc */
+#define R_X86_64_64		1	/* Direct 64 bit  */
+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
+#define R_X86_64_GOTPCREL	9	/* 32 bit signed pc relative
+					   offset to GOT */
+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM		16
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	((x)->e_machine == EM_X86_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_X86_64
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
+   contains a pointer to a function which might be registered using `atexit'.
+   This provides a mean for the dynamic linker to call DT_FINI functions for
+   shared libraries that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler. 
+
+   We might as well make sure everything else is cleared too (except for %esp),
+   just to make things more deterministic.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	struct task_struct *cur = current; \
+	(_r)->rbx = 0; (_r)->rcx = 0; (_r)->rdx = 0; \
+	(_r)->rsi = 0; (_r)->rdi = 0; (_r)->rbp = 0; \
+	(_r)->rax = 0;				\
+	(_r)->r8 = 0;				\
+	(_r)->r9 = 0;				\
+	(_r)->r10 = 0;				\
+	(_r)->r11 = 0;				\
+	(_r)->r12 = 0;				\
+	(_r)->r13 = 0;				\
+	(_r)->r14 = 0;				\
+	(_r)->r15 = 0;				\
+        cur->thread.fs = 0; cur->thread.gs = 0; \
+	cur->thread.fsindex = 0; cur->thread.gsindex = 0; \
+        cur->thread.ds = 0; cur->thread.es = 0;  \
+	clear_thread_flag(TIF_IA32); \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+   now struct_user_regs, they are different). Assumes current is the process
+   getting dumped. */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)  do { \
+	unsigned v;						\
+	(pr_reg)[0] = (regs)->r15;				\
+	(pr_reg)[1] = (regs)->r14;				\
+	(pr_reg)[2] = (regs)->r13;				\
+	(pr_reg)[3] = (regs)->r12;				\
+	(pr_reg)[4] = (regs)->rbp;				\
+	(pr_reg)[5] = (regs)->rbx;				\
+	(pr_reg)[6] = (regs)->r11;				\
+	(pr_reg)[7] = (regs)->r10;				\
+	(pr_reg)[8] = (regs)->r9;				\
+	(pr_reg)[9] = (regs)->r8;				\
+	(pr_reg)[10] = (regs)->rax;				\
+	(pr_reg)[11] = (regs)->rcx;				\
+	(pr_reg)[12] = (regs)->rdx;				\
+	(pr_reg)[13] = (regs)->rsi;				\
+	(pr_reg)[14] = (regs)->rdi;				\
+	(pr_reg)[15] = (regs)->orig_rax;			\
+	(pr_reg)[16] = (regs)->rip;			\
+	(pr_reg)[17] = (regs)->cs;			\
+	(pr_reg)[18] = (regs)->eflags;			\
+	(pr_reg)[19] = (regs)->rsp;			\
+	(pr_reg)[20] = (regs)->ss;			\
+	(pr_reg)[21] = current->thread.fs;			\
+	(pr_reg)[22] = current->thread.gs;			\
+	asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v;	\
+	asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v;	\
+	asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v;	\
+	asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v;	\
+} while(0);
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.x86_capability[0])
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+/* I'm not sure if we can use '-' here */
+#define ELF_PLATFORM  ("x86_64")
+
+#ifdef __KERNEL__
+extern void set_personality_64bit(void);
+#define SET_PERSONALITY(ex, ibcs2) set_personality_64bit()
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	(executable_stack != EXSTACK_DISABLE_X)
+
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#endif
+
+#endif
diff --git a/include/asm-x86_64/errno.h b/include/asm-x86_64/errno.h
new file mode 100644
index 000000000000..311182129e32
--- /dev/null
+++ b/include/asm-x86_64/errno.h
@@ -0,0 +1,6 @@
+#ifndef _X8664_ERRNO_H
+#define _X8664_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-x86_64/fcntl.h b/include/asm-x86_64/fcntl.h
new file mode 100644
index 000000000000..4411f221c037
--- /dev/null
+++ b/include/asm-x86_64/fcntl.h
@@ -0,0 +1,76 @@
+#ifndef _X86_64_FCNTL_H
+#define _X86_64_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short  l_type;
+	short  l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* !_X86_64_FCNTL_H */
diff --git a/include/asm-x86_64/fixmap.h b/include/asm-x86_64/fixmap.h
new file mode 100644
index 000000000000..cf8b16cbe8db
--- /dev/null
+++ b/include/asm-x86_64/fixmap.h
@@ -0,0 +1,96 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#include <asm/vsyscall.h>
+#include <asm/vsyscall32.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+enum fixed_addresses {
+	VSYSCALL_LAST_PAGE,
+	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
+	FIX_HPET_BASE,
+#ifdef CONFIG_X86_LOCAL_APIC
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+extern inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+#endif
diff --git a/include/asm-x86_64/floppy.h b/include/asm-x86_64/floppy.h
new file mode 100644
index 000000000000..bca9b28a1a0a
--- /dev/null
+++ b/include/asm-x86_64/floppy.h
@@ -0,0 +1,285 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_X86_64_FLOPPY_H
+#define __ASM_X86_64_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if (!doing_pdma)
+		return floppy_interrupt(irq, dev_id, regs);
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr;
+
+		st = 1;
+		for(lcount=virtual_dma_count, lptr=virtual_dma_addr; 
+		    lcount; lcount--, lptr++) {
+			st=inb(virtual_dma_port+4) & 0xa0 ;
+			if(st != 0xa0) 
+				break;
+			if(virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port+5);
+			else
+				*lptr = inb_p(virtual_dma_port+5);
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port+4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if(st == 0x20)
+		return IRQ_HANDLED;
+	if(!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return IRQ_HANDLED;
+	}
+#ifdef TRACE_FLPY_INT
+	if(!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+	if(! (can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if(can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+						   "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+						   SA_INTERRUPT|SA_SAMPLE_RANDOM,
+						   "floppy", NULL);	
+
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL,get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if((unsigned long) addr >= (unsigned long) high_memory)
+		vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));		
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if(can_use_virtual_dma == 2) {
+		if((unsigned long) addr >= (unsigned long) high_memory ||
+		   isa_virt_to_bus(addr) >= 0x1000000 ||
+		   _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char * device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc) (unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user.		Paul G.
+ */
+#define FLOPPY0_TYPE	({				\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = (CMOS_READ(0x10) >> 4) & 15;		\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define FLOPPY1_TYPE	({				\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = CMOS_READ(0x10) & 15;			\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define AUTO_DMA
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_X86_64_FLOPPY_H */
diff --git a/include/asm-x86_64/fpu32.h b/include/asm-x86_64/fpu32.h
new file mode 100644
index 000000000000..4153db5c0c31
--- /dev/null
+++ b/include/asm-x86_64/fpu32.h
@@ -0,0 +1,10 @@
+#ifndef _FPU32_H
+#define _FPU32_H 1
+
+struct _fpstate_ia32;
+
+int restore_i387_ia32(struct task_struct *tsk, struct _fpstate_ia32 __user *buf, int fsave);
+int save_i387_ia32(struct task_struct *tsk, struct _fpstate_ia32 __user *buf, 
+		   struct pt_regs *regs, int fsave);
+
+#endif
diff --git a/include/asm-x86_64/genapic.h b/include/asm-x86_64/genapic.h
new file mode 100644
index 000000000000..50b38e7c58e4
--- /dev/null
+++ b/include/asm-x86_64/genapic.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_GENAPIC_H
+#define _ASM_GENAPIC_H 1
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+
+struct genapic {
+	char *name;
+	u32 int_delivery_mode;
+	u32 int_dest_mode;
+	u32 int_delivery_dest;	/* for quick IPIs */
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	void (*init_apic_ldr)(void);
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	/* */
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	unsigned int (*phys_pkg_id)(int index_msb);
+};
+
+
+extern struct genapic *genapic;
+
+#endif
diff --git a/include/asm-x86_64/hardirq.h b/include/asm-x86_64/hardirq.h
new file mode 100644
index 000000000000..27c381fa1c9d
--- /dev/null
+++ b/include/asm-x86_64/hardirq.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/pda.h>
+#include <asm/apic.h>
+
+#define __ARCH_IRQ_STAT 1
+
+/* Generate a lvalue for a pda member. Should fix softirq.c instead to use
+   special access macros. This would generate better code. */ 
+#define __IRQ_STAT(cpu,member) (read_pda(me)->member)
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk("unexpected IRQ trap at vector %02x\n", irq);
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * Currently unexpected vectors happen only on SMP and APIC.
+	 * We _must_ ack these because every local APIC has only N
+	 * irq slots per priority level, and a 'hanging, unacked' IRQ
+	 * holds up an irq slot - in excessive cases (when multiple
+	 * unexpected vectors occur) that might lock up the APIC
+	 * completely.
+	 */
+	ack_APIC_irq();
+#endif
+}
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-x86_64/hdreg.h b/include/asm-x86_64/hdreg.h
new file mode 100644
index 000000000000..5989bbc97cbf
--- /dev/null
+++ b/include/asm-x86_64/hdreg.h
@@ -0,0 +1 @@
+#warning this file is obsolete, please do not use it
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
new file mode 100644
index 000000000000..a3877f570998
--- /dev/null
+++ b/include/asm-x86_64/hpet.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X8664_HPET_H
+#define _ASM_X8664_HPET_H 1
+
+/*
+ * Documentation on HPET can be found at:
+ *      http://www.intel.com/ial/home/sp/pcmmspec.htm
+ *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_MMAP_SIZE	1024
+
+#define HPET_ID		0x000
+#define HPET_PERIOD	0x004
+#define HPET_CFG	0x010
+#define HPET_STATUS	0x020
+#define HPET_COUNTER	0x0f0
+#define HPET_T0_CFG	0x100
+#define HPET_T0_CMP	0x108
+#define HPET_T0_ROUTE	0x110
+#define HPET_T1_CFG	0x120
+#define HPET_T1_CMP	0x128
+#define HPET_T1_ROUTE	0x130
+#define HPET_T2_CFG	0x140
+#define HPET_T2_CMP	0x148
+#define HPET_T2_ROUTE	0x150
+
+#define HPET_ID_VENDOR	0xffff0000
+#define HPET_ID_LEGSUP	0x00008000
+#define HPET_ID_NUMBER	0x00001f00
+#define HPET_ID_REV	0x000000ff
+#define	HPET_ID_NUMBER_SHIFT	8
+
+#define HPET_ID_VENDOR_SHIFT	16
+#define HPET_ID_VENDOR_8086	0x8086
+
+#define HPET_CFG_ENABLE	0x001
+#define HPET_CFG_LEGACY	0x002
+#define	HPET_LEGACY_8254	2
+#define	HPET_LEGACY_RTC		8
+
+#define HPET_TN_ENABLE		0x004
+#define HPET_TN_PERIODIC	0x008
+#define HPET_TN_PERIODIC_CAP	0x010
+#define HPET_TN_SETVAL		0x040
+#define HPET_TN_32BIT		0x100
+
+extern int is_hpet_enabled(void);
+extern int hpet_rtc_timer_init(void);
+extern int oem_force_hpet_timer(void);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+#endif /* CONFIG_HPET_EMULATE_RTC */
+
+#endif
diff --git a/include/asm-x86_64/hw_irq.h b/include/asm-x86_64/hw_irq.h
new file mode 100644
index 000000000000..2b5cb2865d21
--- /dev/null
+++ b/include/asm-x86_64/hw_irq.h
@@ -0,0 +1,144 @@
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+/*
+ *	linux/include/asm/hw_irq.h
+ *
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ *
+ *	hacked by Andi Kleen for x86-64.
+ * 
+ *  $Id: hw_irq.h,v 1.24 2001/09/14 20:55:03 vojtech Exp $
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+struct hw_interrupt_type;
+#endif
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#define IA32_SYSCALL_VECTOR	0x80
+
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xf9 are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR	0xff
+#define ERROR_APIC_VECTOR	0xfe
+#define INVALIDATE_TLB_VECTOR	0xfd
+#define RESCHEDULE_VECTOR	0xfc
+#define TASK_MIGRATION_VECTOR	0xfb
+#define CALL_FUNCTION_VECTOR	0xfa
+#define KDB_VECTOR	0xf9
+
+#define THERMAL_APIC_VECTOR	0xf0
+
+
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	0x31
+#define FIRST_SYSTEM_VECTOR	0xef   /* duplicated in irq.h */
+
+
+#ifndef __ASSEMBLY__
+extern u8 irq_vector[NR_IRQ_VECTORS];
+#define IO_APIC_VECTOR(irq)	(irq_vector[irq])
+#define AUTO_ASSIGN		-1
+
+/*
+ * Various low-level irq details needed by irq.c, process.c,
+ * time.c, io_apic.c and smp.c
+ *
+ * Interrupt entry/exit code at both C and assembly level
+ */
+
+extern void disable_8259A_irq(unsigned int irq);
+extern void enable_8259A_irq(unsigned int irq);
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+extern void init_8259A(int aeoi);
+extern void FASTCALL(send_IPI_self(int vector));
+extern void init_VISWS_APIC_irqs(void);
+extern void setup_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern void print_IO_APIC(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern void send_IPI(int dest, int vector);
+extern void setup_ioapic_dest(void);
+
+extern unsigned long io_apic_irqs;
+
+extern atomic_t irq_err_count;
+extern atomic_t irq_mis_count;
+
+#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+
+#define __STR(x) #x
+#define STR(x) __STR(x)
+
+#include <asm/ptrace.h>
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+
+/*
+ *	SMP has a few special interrupts for IPI messages
+ */
+
+#define BUILD_IRQ(nr) \
+asmlinkage void IRQ_NAME(nr); \
+__asm__( \
+"\n.p2align\n" \
+"IRQ" #nr "_interrupt:\n\t" \
+	"push $" #nr "-256 ; " \
+	"jmp common_interrupt");
+
+#if defined(CONFIG_X86_IO_APIC)
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {
+	if (IO_APIC_IRQ(i))
+		send_IPI_self(IO_APIC_VECTOR(i));
+}
+#else
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+#endif
+
+#define platform_legacy_irq(irq)	((irq) < 16)
+
+#endif
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-x86_64/i387.h b/include/asm-x86_64/i387.h
new file mode 100644
index 000000000000..aa39cfd0e001
--- /dev/null
+++ b/include/asm-x86_64/i387.h
@@ -0,0 +1,150 @@
+/*
+ * include/asm-x86_64/i387.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ * x86-64 work by Andi Kleen 2002
+ */
+
+#ifndef __ASM_X86_64_I387_H
+#define __ASM_X86_64_I387_H
+
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess.h>
+
+extern void fpu_init(void);
+extern unsigned int mxcsr_feature_mask;
+extern void mxcsr_feature_mask_init(void);
+extern void init_fpu(struct task_struct *child);
+extern int save_i387(struct _fpstate __user *buf);
+
+/*
+ * FPU lazy state save handling...
+ */
+
+#define unlazy_fpu(tsk) do { \
+	if ((tsk)->thread_info->status & TS_USEDFPU) \
+		save_init_fpu(tsk); \
+} while (0)
+
+/* Ignore delayed exceptions from user space */
+static inline void tolerant_fwait(void)
+{
+	asm volatile("1: fwait\n"
+		     "2:\n"
+		     "   .section __ex_table,\"a\"\n"
+		     "	.align 8\n"
+		     "	.quad 1b,2b\n"
+		     "	.previous\n");
+}
+
+#define clear_fpu(tsk) do { \
+	if ((tsk)->thread_info->status & TS_USEDFPU) {		\
+		tolerant_fwait();				\
+		(tsk)->thread_info->status &= ~TS_USEDFPU;	\
+		stts();						\
+	}							\
+} while (0)
+
+/*
+ * ptrace request handers...
+ */
+extern int get_fpregs(struct user_i387_struct __user *buf,
+		      struct task_struct *tsk);
+extern int set_fpregs(struct task_struct *tsk,
+		      struct user_i387_struct __user *buf);
+
+/*
+ * i387 state interaction
+ */
+#define get_fpu_mxcsr(t) ((t)->thread.i387.fxsave.mxcsr)
+#define get_fpu_cwd(t) ((t)->thread.i387.fxsave.cwd)
+#define get_fpu_fxsr_twd(t) ((t)->thread.i387.fxsave.twd)
+#define get_fpu_swd(t) ((t)->thread.i387.fxsave.swd)
+#define set_fpu_cwd(t,val) ((t)->thread.i387.fxsave.cwd = (val))
+#define set_fpu_swd(t,val) ((t)->thread.i387.fxsave.swd = (val))
+#define set_fpu_fxsr_twd(t,val) ((t)->thread.i387.fxsave.twd = (val))
+
+static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) 
+{ 
+	int err;
+	asm volatile("1:  rex64 ; fxrstor (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     ".section __ex_table,\"a\"\n"
+		     "   .align 8\n"
+		     "   .quad  1b,3b\n"
+		     ".previous"
+		     : [err] "=r" (err)
+		     : [fx] "r" (fx), "0" (0)); 
+	if (unlikely(err))
+		init_fpu(current);
+	return err;
+} 
+
+static inline int save_i387_checking(struct i387_fxsave_struct __user *fx) 
+{ 
+	int err;
+	asm volatile("1:  rex64 ; fxsave (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     ".section __ex_table,\"a\"\n"
+		     "   .align 8\n"
+		     "   .quad  1b,3b\n"
+		     ".previous"
+		     : [err] "=r" (err)
+		     : [fx] "r" (fx), "0" (0)); 
+	if (unlikely(err))
+		__clear_user(fx, sizeof(struct i387_fxsave_struct));
+	return err;
+} 
+
+static inline void kernel_fpu_begin(void)
+{
+	struct thread_info *me = current_thread_info();
+	preempt_disable();
+	if (me->status & TS_USEDFPU) { 
+		asm volatile("rex64 ; fxsave %0 ; fnclex"
+			      : "=m" (me->task->thread.i387.fxsave));
+		me->status &= ~TS_USEDFPU;
+		return;
+	}
+	clts();
+}
+
+static inline void kernel_fpu_end(void)
+{
+	stts();
+	preempt_enable();
+}
+
+static inline void save_init_fpu( struct task_struct *tsk )
+{
+	asm volatile( "rex64 ; fxsave %0 ; fnclex"
+		      : "=m" (tsk->thread.i387.fxsave));
+	tsk->thread_info->status &= ~TS_USEDFPU;
+	stts();
+}
+
+/* 
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+#endif /* __ASM_X86_64_I387_H */
diff --git a/include/asm-x86_64/ia32.h b/include/asm-x86_64/ia32.h
new file mode 100644
index 000000000000..c0a7717923ed
--- /dev/null
+++ b/include/asm-x86_64/ia32.h
@@ -0,0 +1,172 @@
+#ifndef _ASM_X86_64_IA32_H
+#define _ASM_X86_64_IA32_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IA32_EMULATION
+
+#include <linux/compat.h>
+
+/*
+ * 32 bit structures for IA32 support.
+ */
+
+#include <asm/sigcontext32.h>
+
+/* signal.h */
+struct sigaction32 {
+       unsigned int  sa_handler;	/* Really a pointer, but need to deal 
+					     with 32 bits */
+       unsigned int sa_flags;
+       unsigned int sa_restorer;	/* Another 32 bit pointer */
+       compat_sigset_t sa_mask;		/* A 32 bit mask */
+};
+
+struct old_sigaction32 {
+       unsigned int  sa_handler;	/* Really a pointer, but need to deal 
+					     with 32 bits */
+       compat_old_sigset_t sa_mask;		/* A 32 bit mask */
+       unsigned int sa_flags;
+       unsigned int sa_restorer;	/* Another 32 bit pointer */
+};
+
+typedef struct sigaltstack_ia32 {
+	unsigned int	ss_sp;
+	int		ss_flags;
+	unsigned int	ss_size;
+} stack_ia32_t;
+
+struct ucontext_ia32 {
+	unsigned int	  uc_flags;
+	unsigned int 	  uc_link;
+	stack_ia32_t	  uc_stack;
+	struct sigcontext_ia32 uc_mcontext;
+	compat_sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+/* This matches struct stat64 in glibc2.2, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char		__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned int		__st_ino;
+
+	unsigned int		st_mode;
+	unsigned int		st_nlink;
+
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char		__pad3[4];
+
+	long long		st_size;
+	unsigned int		st_blksize;
+
+	long long		st_blocks;/* Number 512-byte blocks allocated. */
+
+	unsigned 		st_atime;
+	unsigned 		st_atime_nsec;
+	unsigned 		st_mtime;
+	unsigned 		st_mtime_nsec;
+	unsigned 		st_ctime;
+	unsigned 		st_ctime_nsec;
+
+	unsigned long long	st_ino;
+} __attribute__((packed));
+
+typedef struct compat_siginfo{
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[((128/sizeof(int)) - 3)];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			int _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+struct sigframe32
+{
+        u32 pretcode;
+        int sig;
+        struct sigcontext_ia32 sc;
+        struct _fpstate_ia32 fpstate;
+        unsigned int extramask[_COMPAT_NSIG_WORDS-1];
+};
+
+struct rt_sigframe32
+{
+        u32 pretcode;
+        int sig;
+        u32 pinfo;
+        u32 puc;
+        compat_siginfo_t info;
+        struct ucontext_ia32 uc;
+        struct _fpstate_ia32 fpstate;
+};
+
+struct ustat32 {
+	__u32	f_tfree;
+	compat_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+#define IA32_STACK_TOP IA32_PAGE_OFFSET
+
+#ifdef __KERNEL__
+struct user_desc;
+struct siginfo_t;
+int do_get_thread_area(struct thread_struct *t, struct user_desc __user *info);
+int do_set_thread_area(struct thread_struct *t, struct user_desc __user *info);
+int ia32_child_tls(struct task_struct *p, struct pt_regs *childregs);
+#endif
+
+#endif /* !CONFIG_IA32_SUPPORT */
+ 
+#endif 
diff --git a/include/asm-x86_64/ia32_unistd.h b/include/asm-x86_64/ia32_unistd.h
new file mode 100644
index 000000000000..f3b7111cf33d
--- /dev/null
+++ b/include/asm-x86_64/ia32_unistd.h
@@ -0,0 +1,300 @@
+#ifndef _ASM_X86_64_IA32_UNISTD_H_
+#define _ASM_X86_64_IA32_UNISTD_H_
+
+/*
+ * This file contains the system call numbers of the ia32 port,
+ * this is for the kernel only.
+ */
+
+#define __NR_ia32_restart_syscall 0
+#define __NR_ia32_exit		  1
+#define __NR_ia32_fork		  2
+#define __NR_ia32_read		  3
+#define __NR_ia32_write		  4
+#define __NR_ia32_open		  5
+#define __NR_ia32_close		  6
+#define __NR_ia32_waitpid		  7
+#define __NR_ia32_creat		  8
+#define __NR_ia32_link		  9
+#define __NR_ia32_unlink		 10
+#define __NR_ia32_execve		 11
+#define __NR_ia32_chdir		 12
+#define __NR_ia32_time		 13
+#define __NR_ia32_mknod		 14
+#define __NR_ia32_chmod		 15
+#define __NR_ia32_lchown		 16
+#define __NR_ia32_break		 17
+#define __NR_ia32_oldstat		 18
+#define __NR_ia32_lseek		 19
+#define __NR_ia32_getpid		 20
+#define __NR_ia32_mount		 21
+#define __NR_ia32_umount		 22
+#define __NR_ia32_setuid		 23
+#define __NR_ia32_getuid		 24
+#define __NR_ia32_stime		 25
+#define __NR_ia32_ptrace		 26
+#define __NR_ia32_alarm		 27
+#define __NR_ia32_oldfstat		 28
+#define __NR_ia32_pause		 29
+#define __NR_ia32_utime		 30
+#define __NR_ia32_stty		 31
+#define __NR_ia32_gtty		 32
+#define __NR_ia32_access		 33
+#define __NR_ia32_nice		 34
+#define __NR_ia32_ftime		 35
+#define __NR_ia32_sync		 36
+#define __NR_ia32_kill		 37
+#define __NR_ia32_rename		 38
+#define __NR_ia32_mkdir		 39
+#define __NR_ia32_rmdir		 40
+#define __NR_ia32_dup		 41
+#define __NR_ia32_pipe		 42
+#define __NR_ia32_times		 43
+#define __NR_ia32_prof		 44
+#define __NR_ia32_brk		 45
+#define __NR_ia32_setgid		 46
+#define __NR_ia32_getgid		 47
+#define __NR_ia32_signal		 48
+#define __NR_ia32_geteuid		 49
+#define __NR_ia32_getegid		 50
+#define __NR_ia32_acct		 51
+#define __NR_ia32_umount2		 52
+#define __NR_ia32_lock		 53
+#define __NR_ia32_ioctl		 54
+#define __NR_ia32_fcntl		 55
+#define __NR_ia32_mpx		 56
+#define __NR_ia32_setpgid		 57
+#define __NR_ia32_ulimit		 58
+#define __NR_ia32_oldolduname	 59
+#define __NR_ia32_umask		 60
+#define __NR_ia32_chroot		 61
+#define __NR_ia32_ustat		 62
+#define __NR_ia32_dup2		 63
+#define __NR_ia32_getppid		 64
+#define __NR_ia32_getpgrp		 65
+#define __NR_ia32_setsid		 66
+#define __NR_ia32_sigaction		 67
+#define __NR_ia32_sgetmask		 68
+#define __NR_ia32_ssetmask		 69
+#define __NR_ia32_setreuid		 70
+#define __NR_ia32_setregid		 71
+#define __NR_ia32_sigsuspend		 72
+#define __NR_ia32_sigpending		 73
+#define __NR_ia32_sethostname	 74
+#define __NR_ia32_setrlimit		 75
+#define __NR_ia32_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_ia32_getrusage		 77
+#define __NR_ia32_gettimeofday	 78
+#define __NR_ia32_settimeofday	 79
+#define __NR_ia32_getgroups		 80
+#define __NR_ia32_setgroups		 81
+#define __NR_ia32_select		 82
+#define __NR_ia32_symlink		 83
+#define __NR_ia32_oldlstat		 84
+#define __NR_ia32_readlink		 85
+#define __NR_ia32_uselib		 86
+#define __NR_ia32_swapon		 87
+#define __NR_ia32_reboot		 88
+#define __NR_ia32_readdir		 89
+#define __NR_ia32_mmap		 90
+#define __NR_ia32_munmap		 91
+#define __NR_ia32_truncate		 92
+#define __NR_ia32_ftruncate		 93
+#define __NR_ia32_fchmod		 94
+#define __NR_ia32_fchown		 95
+#define __NR_ia32_getpriority	 96
+#define __NR_ia32_setpriority	 97
+#define __NR_ia32_profil		 98
+#define __NR_ia32_statfs		 99
+#define __NR_ia32_fstatfs		100
+#define __NR_ia32_ioperm		101
+#define __NR_ia32_socketcall		102
+#define __NR_ia32_syslog		103
+#define __NR_ia32_setitimer		104
+#define __NR_ia32_getitimer		105
+#define __NR_ia32_stat		106
+#define __NR_ia32_lstat		107
+#define __NR_ia32_fstat		108
+#define __NR_ia32_olduname		109
+#define __NR_ia32_iopl		110
+#define __NR_ia32_vhangup		111
+#define __NR_ia32_idle		112
+#define __NR_ia32_vm86old		113
+#define __NR_ia32_wait4		114
+#define __NR_ia32_swapoff		115
+#define __NR_ia32_sysinfo		116
+#define __NR_ia32_ipc		117
+#define __NR_ia32_fsync		118
+#define __NR_ia32_sigreturn		119
+#define __NR_ia32_clone		120
+#define __NR_ia32_setdomainname	121
+#define __NR_ia32_uname		122
+#define __NR_ia32_modify_ldt		123
+#define __NR_ia32_adjtimex		124
+#define __NR_ia32_mprotect		125
+#define __NR_ia32_sigprocmask	126
+#define __NR_ia32_create_module	127
+#define __NR_ia32_init_module	128
+#define __NR_ia32_delete_module	129
+#define __NR_ia32_get_kernel_syms	130
+#define __NR_ia32_quotactl		131
+#define __NR_ia32_getpgid		132
+#define __NR_ia32_fchdir		133
+#define __NR_ia32_bdflush		134
+#define __NR_ia32_sysfs		135
+#define __NR_ia32_personality	136
+#define __NR_ia32_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_ia32_setfsuid		138
+#define __NR_ia32_setfsgid		139
+#define __NR_ia32__llseek		140
+#define __NR_ia32_getdents		141
+#define __NR_ia32__newselect		142
+#define __NR_ia32_flock		143
+#define __NR_ia32_msync		144
+#define __NR_ia32_readv		145
+#define __NR_ia32_writev		146
+#define __NR_ia32_getsid		147
+#define __NR_ia32_fdatasync		148
+#define __NR_ia32__sysctl		149
+#define __NR_ia32_mlock		150
+#define __NR_ia32_munlock		151
+#define __NR_ia32_mlockall		152
+#define __NR_ia32_munlockall		153
+#define __NR_ia32_sched_setparam		154
+#define __NR_ia32_sched_getparam		155
+#define __NR_ia32_sched_setscheduler		156
+#define __NR_ia32_sched_getscheduler		157
+#define __NR_ia32_sched_yield		158
+#define __NR_ia32_sched_get_priority_max	159
+#define __NR_ia32_sched_get_priority_min	160
+#define __NR_ia32_sched_rr_get_interval	161
+#define __NR_ia32_nanosleep		162
+#define __NR_ia32_mremap		163
+#define __NR_ia32_setresuid		164
+#define __NR_ia32_getresuid		165
+#define __NR_ia32_vm86		166
+#define __NR_ia32_query_module	167
+#define __NR_ia32_poll		168
+#define __NR_ia32_nfsservctl		169
+#define __NR_ia32_setresgid		170
+#define __NR_ia32_getresgid		171
+#define __NR_ia32_prctl              172
+#define __NR_ia32_rt_sigreturn	173
+#define __NR_ia32_rt_sigaction	174
+#define __NR_ia32_rt_sigprocmask	175
+#define __NR_ia32_rt_sigpending	176
+#define __NR_ia32_rt_sigtimedwait	177
+#define __NR_ia32_rt_sigqueueinfo	178
+#define __NR_ia32_rt_sigsuspend	179
+#define __NR_ia32_pread		180
+#define __NR_ia32_pwrite		181
+#define __NR_ia32_chown		182
+#define __NR_ia32_getcwd		183
+#define __NR_ia32_capget		184
+#define __NR_ia32_capset		185
+#define __NR_ia32_sigaltstack	186
+#define __NR_ia32_sendfile		187
+#define __NR_ia32_getpmsg		188	/* some people actually want streams */
+#define __NR_ia32_putpmsg		189	/* some people actually want streams */
+#define __NR_ia32_vfork		190
+#define __NR_ia32_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_ia32_mmap2		192
+#define __NR_ia32_truncate64		193
+#define __NR_ia32_ftruncate64	194
+#define __NR_ia32_stat64		195
+#define __NR_ia32_lstat64		196
+#define __NR_ia32_fstat64		197
+#define __NR_ia32_lchown32		198
+#define __NR_ia32_getuid32		199
+#define __NR_ia32_getgid32		200
+#define __NR_ia32_geteuid32		201
+#define __NR_ia32_getegid32		202
+#define __NR_ia32_setreuid32		203
+#define __NR_ia32_setregid32		204
+#define __NR_ia32_getgroups32	205
+#define __NR_ia32_setgroups32	206
+#define __NR_ia32_fchown32		207
+#define __NR_ia32_setresuid32	208
+#define __NR_ia32_getresuid32	209
+#define __NR_ia32_setresgid32	210
+#define __NR_ia32_getresgid32	211
+#define __NR_ia32_chown32		212
+#define __NR_ia32_setuid32		213
+#define __NR_ia32_setgid32		214
+#define __NR_ia32_setfsuid32		215
+#define __NR_ia32_setfsgid32		216
+#define __NR_ia32_pivot_root		217
+#define __NR_ia32_mincore		218
+#define __NR_ia32_madvise		219
+#define __NR_ia32_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_ia32_getdents64		220
+#define __NR_ia32_fcntl64		221
+#define __NR_ia32_tuxcall		222
+#define __NR_ia32_security		223
+#define __NR_ia32_gettid		224
+#define __NR_ia32_readahead		225
+#define __NR_ia32_setxattr		226
+#define __NR_ia32_lsetxattr		227
+#define __NR_ia32_fsetxattr		228
+#define __NR_ia32_getxattr		229
+#define __NR_ia32_lgetxattr		230
+#define __NR_ia32_fgetxattr		231
+#define __NR_ia32_listxattr		232
+#define __NR_ia32_llistxattr		233
+#define __NR_ia32_flistxattr		234
+#define __NR_ia32_removexattr	235
+#define __NR_ia32_lremovexattr	236
+#define __NR_ia32_fremovexattr	237
+#define __NR_ia32_tkill		238
+#define __NR_ia32_sendfile64		239
+#define __NR_ia32_futex		240
+#define __NR_ia32_sched_setaffinity	241
+#define __NR_ia32_sched_getaffinity	242
+#define __NR_ia32_set_thread_area   243
+#define __NR_ia32_get_thread_area	244
+#define __NR_ia32_io_setup		245
+#define __NR_ia32_io_destroy		246
+#define __NR_ia32_io_getevents	247
+#define __NR_ia32_io_submit		248
+#define __NR_ia32_io_cancel		249
+#define __NR_ia32_exit_group		252
+#define __NR_ia32_lookup_dcookie	253
+#define __NR_ia32_sys_epoll_create	254
+#define __NR_ia32_sys_epoll_ctl	255
+#define __NR_ia32_sys_epoll_wait	256
+#define __NR_ia32_remap_file_pages	257
+#define __NR_ia32_set_tid_address	258
+#define __NR_ia32_timer_create		259
+#define __NR_ia32_timer_settime	(__NR_ia32_timer_create+1)
+#define __NR_ia32_timer_gettime	(__NR_ia32_timer_create+2)
+#define __NR_ia32_timer_getoverrun	(__NR_ia32_timer_create+3)
+#define __NR_ia32_timer_delete	(__NR_ia32_timer_create+4)
+#define __NR_ia32_clock_settime	(__NR_ia32_timer_create+5)
+#define __NR_ia32_clock_gettime	(__NR_ia32_timer_create+6)
+#define __NR_ia32_clock_getres	(__NR_ia32_timer_create+7)
+#define __NR_ia32_clock_nanosleep	(__NR_ia32_timer_create+8)
+#define __NR_ia32_statfs64		268
+#define __NR_ia32_fstatfs64		269
+#define __NR_ia32_tgkill		270
+#define __NR_ia32_utimes		271
+#define __NR_ia32_fadvise64_64		272
+#define __NR_ia32_vserver		273
+#define __NR_ia32_mbind		274
+#define __NR_ia32_get_mempolicy	275
+#define __NR_ia32_set_mempolicy	276
+#define __NR_ia32_mq_open 		277
+#define __NR_ia32_mq_unlink		(__NR_ia32_mq_open+1)
+#define __NR_ia32_mq_timedsend	(__NR_ia32_mq_open+2)
+#define __NR_ia32_mq_timedreceive	(__NR_ia32_mq_open+3)
+#define __NR_ia32_mq_notify		(__NR_ia32_mq_open+4)
+#define __NR_ia32_mq_getsetattr	(__NR_ia32_mq_open+5)
+#define __NR_ia32_kexec		283
+#define __NR_ia32_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_ia32_add_key		286
+#define __NR_ia32_request_key	287
+#define __NR_ia32_keyctl		288
+
+#define IA32_NR_syscalls 290	/* must be > than biggest syscall! */
+
+#endif /* _ASM_X86_64_IA32_UNISTD_H_ */
diff --git a/include/asm-x86_64/ide.h b/include/asm-x86_64/ide.h
new file mode 100644
index 000000000000..4cef0ef61878
--- /dev/null
+++ b/include/asm-x86_64/ide.h
@@ -0,0 +1 @@
+#include <asm-i386/ide.h>
diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h
new file mode 100644
index 000000000000..94202703fae2
--- /dev/null
+++ b/include/asm-x86_64/io.h
@@ -0,0 +1,341 @@
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/config.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
+
+#ifdef REALLY_SLOW_IO
+#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
+#else
+#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+
+/*
+ * Talk about misusing macros..
+ */
+#define __OUT1(s,x) \
+extern inline void out##s(unsigned x value, unsigned short port) {
+
+#define __OUT2(s,s1,s2) \
+__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+
+#define __OUT(s,s1,x) \
+__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
+__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \
+
+#define __IN1(s) \
+extern inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
+
+#define __IN2(s,s1,s2) \
+__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
+
+#define __IN(s,s1,i...) \
+__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
+__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
+
+#define __INS(s) \
+extern inline void ins##s(unsigned short port, void * addr, unsigned long count) \
+{ __asm__ __volatile__ ("rep ; ins" #s \
+: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+
+#define __OUTS(s) \
+extern inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
+{ __asm__ __volatile__ ("rep ; outs" #s \
+: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+
+#define RETURN_TYPE unsigned char
+__IN(b,"")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned short
+__IN(w,"")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned int
+__IN(l,"")
+#undef RETURN_TYPE
+
+__OUT(b,"b",char)
+__OUT(w,"w",short)
+__OUT(l,,int)
+
+__INS(b)
+__INS(w)
+__INS(l)
+
+__OUTS(b)
+__OUTS(w)
+__OUTS(l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+#if defined(__KERNEL__) && __x86_64__
+
+#include <linux/vmalloc.h>
+
+#ifndef __i386__
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa(address);
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+#endif
+
+/*
+ * Change "struct page" to physical address.
+ */
+#ifdef CONFIG_DISCONTIGMEM
+#include <asm/mmzone.h>
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+#else
+#define page_to_phys(page)	((page - mem_map) << PAGE_SHIFT)
+#endif
+
+#include <asm-generic/iomap.h>
+
+extern void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+extern inline void __iomem * ioremap (unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, 0);
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+
+static inline __u8 __readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u8 *)addr;
+}
+static inline __u16 __readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u16 *)addr;
+}
+static inline __u32 __readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u32 *)addr;
+}
+static inline __u64 __readq(const volatile void __iomem *addr)
+{
+	return *(__force volatile __u64 *)addr;
+}
+#define readb(x) __readb(x)
+#define readw(x) __readw(x)
+#define readl(x) __readl(x)
+#define readq(x) __readq(x)
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+#define readq_relaxed(a) readq(a)
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_readq readq
+
+#define mmiowb()
+
+#ifdef CONFIG_UNORDERED_IO
+static inline void __writel(__u32 val, volatile void __iomem *addr)
+{
+	volatile __u32 __iomem *target = addr;
+	asm volatile("movnti %1,%0"
+		     : "=m" (*target)
+		     : "r" (val) : "memory");
+}
+
+static inline void __writeq(__u64 val, volatile void __iomem *addr)
+{
+	volatile __u64 __iomem *target = addr;
+	asm volatile("movnti %1,%0"
+		     : "=m" (*target)
+		     : "r" (val) : "memory");
+}
+#else
+static inline void __writel(__u32 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u32 *)addr = b;
+}
+static inline void __writeq(__u64 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u64 *)addr = b;
+}
+#endif
+static inline void __writeb(__u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u8 *)addr = b;
+}
+static inline void __writew(__u16 b, volatile void __iomem *addr)
+{
+	*(__force volatile __u16 *)addr = b;
+}
+#define writeq(val,addr) __writeq((val),(addr))
+#define writel(val,addr) __writel((val),(addr))
+#define writew(val,addr) __writew((val),(addr))
+#define writeb(val,addr) __writeb((val),(addr))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define __raw_writeq writeq
+
+void __memcpy_fromio(void*,unsigned long,unsigned);
+void __memcpy_toio(unsigned long,const void*,unsigned);
+
+static inline void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
+{
+	__memcpy_fromio(to,(unsigned long)from,len);
+}
+static inline void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
+{
+	__memcpy_toio((unsigned long)to,from,len);
+}
+
+void memset_io(volatile void __iomem *a, int b, size_t c);
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+#define isa_readb(a) readb(__ISA_IO_base + (a))
+#define isa_readw(a) readw(__ISA_IO_base + (a))
+#define isa_readl(a) readl(__ISA_IO_base + (a))
+#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a))
+#define isa_writew(w,a) writew(w,__ISA_IO_base + (a))
+#define isa_writel(l,a) writel(l,__ISA_IO_base + (a))
+#define isa_memset_io(a,b,c)		memset_io(__ISA_IO_base + (a),(b),(c))
+#define isa_memcpy_fromio(a,b,c)	memcpy_fromio((a),__ISA_IO_base + (b),(c))
+#define isa_memcpy_toio(a,b,c)		memcpy_toio(__ISA_IO_base + (a),(b),(c))
+
+
+/*
+ * Again, x86-64 does not require mem IO specific function.
+ */
+
+#define eth_io_copy_and_sum(a,b,c,d)		eth_copy_and_sum((a),(void *)(b),(c),(d))
+#define isa_eth_io_copy_and_sum(a,b,c,d)	eth_copy_and_sum((a),(void *)(__ISA_IO_base + (b)),(c),(d))
+
+/**
+ *	check_signature		-	find BIOS signatures
+ *	@io_addr: mmio address to check 
+ *	@signature:  signature block
+ *	@length: length of signature
+ *
+ *	Perform a signature comparison with the mmio address io_addr. This
+ *	address should have been obtained by ioremap.
+ *	Returns 1 on a match.
+ */
+ 
+static inline int check_signature(void __iomem *io_addr,
+	const unsigned char *signature, int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+#define flush_write_buffers() 
+
+extern int iommu_bio_merge;
+#define BIO_VMERGE_BOUNDARY iommu_bio_merge
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
new file mode 100644
index 000000000000..7efc932e8f0b
--- /dev/null
+++ b/include/asm-x86_64/io_apic.h
@@ -0,0 +1,221 @@
+#ifndef __ASM_IO_APIC_H
+#define __ASM_IO_APIC_H
+
+#include <linux/config.h>
+#include <asm/types.h>
+#include <asm/mpspec.h>
+
+/*
+ * Intel IO-APIC support for SMP and UP systems.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
+ */
+
+#ifdef CONFIG_X86_IO_APIC
+
+#ifdef CONFIG_PCI_MSI
+static inline int use_pci_vector(void)	{return 1;}
+static inline void disable_edge_ioapic_vector(unsigned int vector) { }
+static inline void mask_and_ack_level_ioapic_vector(unsigned int vector) { }
+static inline void end_edge_ioapic_vector (unsigned int vector) { }
+#define startup_level_ioapic	startup_level_ioapic_vector
+#define shutdown_level_ioapic	mask_IO_APIC_vector
+#define enable_level_ioapic	unmask_IO_APIC_vector
+#define disable_level_ioapic	mask_IO_APIC_vector
+#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_vector
+#define end_level_ioapic	end_level_ioapic_vector
+#define set_ioapic_affinity	set_ioapic_affinity_vector
+
+#define startup_edge_ioapic 	startup_edge_ioapic_vector
+#define shutdown_edge_ioapic 	disable_edge_ioapic_vector
+#define enable_edge_ioapic 	unmask_IO_APIC_vector
+#define disable_edge_ioapic 	disable_edge_ioapic_vector
+#define ack_edge_ioapic 	ack_edge_ioapic_vector
+#define end_edge_ioapic 	end_edge_ioapic_vector
+#else
+static inline int use_pci_vector(void)	{return 0;}
+static inline void disable_edge_ioapic_irq(unsigned int irq) { }
+static inline void mask_and_ack_level_ioapic_irq(unsigned int irq) { }
+static inline void end_edge_ioapic_irq (unsigned int irq) { }
+#define startup_level_ioapic	startup_level_ioapic_irq
+#define shutdown_level_ioapic	mask_IO_APIC_irq
+#define enable_level_ioapic	unmask_IO_APIC_irq
+#define disable_level_ioapic	mask_IO_APIC_irq
+#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_irq
+#define end_level_ioapic	end_level_ioapic_irq
+#define set_ioapic_affinity	set_ioapic_affinity_irq
+
+#define startup_edge_ioapic 	startup_edge_ioapic_irq
+#define shutdown_edge_ioapic 	disable_edge_ioapic_irq
+#define enable_edge_ioapic 	unmask_IO_APIC_irq
+#define disable_edge_ioapic 	disable_edge_ioapic_irq
+#define ack_edge_ioapic 	ack_edge_ioapic_irq
+#define end_edge_ioapic 	end_edge_ioapic_irq
+#endif
+
+#define APIC_MISMATCH_DEBUG
+
+#define IO_APIC_BASE(idx) \
+		((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
+		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
+
+/*
+ * The structure of the IO-APIC:
+ */
+union IO_APIC_reg_00 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 14,
+			LTS		:  1,
+			delivery_type	:  1,
+			__reserved_1	:  8,
+			ID		:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_01 {
+	u32	raw;
+	struct {
+		u32	version		:  8,
+		__reserved_2	:  7,
+		PRQ		:  1,
+		entries		:  8,
+		__reserved_1	:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_02 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 24,
+		arbitration	:  4,
+		__reserved_1	:  4;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_03 {
+	u32	raw;
+	struct {
+		u32	boot_DT		:  1,
+			__reserved_1	: 31;
+	} __attribute__ ((packed)) bits;
+};
+
+/*
+ * # of IO-APICs and # of IRQ routing registers
+ */
+extern int nr_ioapics;
+extern int nr_ioapic_registers[MAX_IO_APICS];
+
+enum ioapic_irq_destination_types {
+	dest_Fixed = 0,
+	dest_LowestPrio = 1,
+	dest_SMI = 2,
+	dest__reserved_1 = 3,
+	dest_NMI = 4,
+	dest_INIT = 5,
+	dest__reserved_2 = 6,
+	dest_ExtINT = 7
+};
+
+struct IO_APIC_route_entry {
+	__u32	vector		:  8,
+		delivery_mode	:  3,	/* 000: FIXED
+					 * 001: lowest prio
+					 * 111: ExtINT
+					 */
+		dest_mode	:  1,	/* 0: physical, 1: logical */
+		delivery_status	:  1,
+		polarity	:  1,
+		irr		:  1,
+		trigger		:  1,	/* 0: edge, 1: level */
+		mask		:  1,	/* 0: enabled, 1: disabled */
+		__reserved_2	: 15;
+
+	union {		struct { __u32
+					__reserved_1	: 24,
+					physical_dest	:  4,
+					__reserved_2	:  4;
+			} physical;
+
+			struct { __u32
+					__reserved_1	: 24,
+					logical_dest	:  8;
+			} logical;
+	} dest;
+
+} __attribute__ ((packed));
+
+/*
+ * MP-BIOS irq configuration table structures:
+ */
+
+/* I/O APIC entries */
+extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+extern int mp_irq_entries;
+
+/* MP IRQ source entries */
+extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* non-0 if default (table-less) MP configuration */
+extern int mpc_default_type;
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+	*IO_APIC_BASE(apic) = reg;
+	return *(IO_APIC_BASE(apic)+4);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	*IO_APIC_BASE(apic) = reg;
+	*(IO_APIC_BASE(apic)+4) = value;
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int value)
+{
+	*(IO_APIC_BASE(apic)+4) = value;
+}
+
+/*
+ * Synchronize the IO-APIC and the CPU by doing
+ * a dummy read from the IO-APIC
+ */
+static inline void io_apic_sync(unsigned int apic)
+{
+	(void) *(IO_APIC_BASE(apic)+4);
+}
+
+/* 1 if "noapic" boot option passed */
+extern int skip_ioapic_setup;
+
+/*
+ * If we use the IO-APIC for IRQ routing, disable automatic
+ * assignment of PCI IRQ's.
+ */
+#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
+
+#ifdef CONFIG_ACPI_BOOT
+extern int io_apic_get_unique_id (int ioapic, int apic_id);
+extern int io_apic_get_version (int ioapic);
+extern int io_apic_get_redir_entries (int ioapic);
+extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
+#endif
+
+extern int sis_apic_bug; /* dummy */ 
+
+#else  /* !CONFIG_X86_IO_APIC */
+#define io_apic_assign_pci_irqs 0
+#endif
+
+extern int assign_irq_vector(int irq);
+
+void enable_NMI_through_LVT0 (void * dummy);
+
+#endif
diff --git a/include/asm-x86_64/ioctl.h b/include/asm-x86_64/ioctl.h
new file mode 100644
index 000000000000..609b663b6bf4
--- /dev/null
+++ b/include/asm-x86_64/ioctl.h
@@ -0,0 +1,75 @@
+/* $Id: ioctl.h,v 1.2 2001/07/04 09:08:13 ak Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASMX8664_IOCTL_H
+#define _ASMX8664_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASMX8664_IOCTL_H */
diff --git a/include/asm-x86_64/ioctl32.h b/include/asm-x86_64/ioctl32.h
new file mode 100644
index 000000000000..d0d227f45e05
--- /dev/null
+++ b/include/asm-x86_64/ioctl32.h
@@ -0,0 +1 @@
+#include <linux/ioctl32.h>
diff --git a/include/asm-x86_64/ioctls.h b/include/asm-x86_64/ioctls.h
new file mode 100644
index 000000000000..62caf8b6e4e1
--- /dev/null
+++ b/include/asm-x86_64/ioctls.h
@@ -0,0 +1,82 @@
+#ifndef __ARCH_X8664_IOCTLS_H__
+#define __ARCH_X8664_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE       0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-x86_64/ipcbuf.h b/include/asm-x86_64/ipcbuf.h
new file mode 100644
index 000000000000..470cf85e3ba8
--- /dev/null
+++ b/include/asm-x86_64/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __x86_64_IPCBUF_H__
+#define __x86_64_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for x86_64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __x86_64_IPCBUF_H__ */
diff --git a/include/asm-x86_64/ipi.h b/include/asm-x86_64/ipi.h
new file mode 100644
index 000000000000..d1841847ed89
--- /dev/null
+++ b/include/asm-x86_64/ipi.h
@@ -0,0 +1,113 @@
+#ifndef __ASM_IPI_H
+#define __ASM_IPI_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC InterProcessor Interrupt code.
+ *
+ * Moved to include file by James Cleverdon from
+ * arch/x86-64/kernel/smp.c
+ *
+ * Copyrights from kernel/smp.c:
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 2002,2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ */
+
+#include <asm/fixmap.h>
+#include <asm/hw_irq.h>
+#include <asm/apicdef.h>
+#include <asm/genapic.h>
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline unsigned int __prepare_ICR (unsigned int shortcut, int vector, unsigned int dest)
+{
+	unsigned int icr =  APIC_DM_FIXED | shortcut | vector | dest;
+	if (vector == KDB_VECTOR)
+		icr = (icr & (~APIC_VECTOR_MASK)) | APIC_DM_NMI;
+	return icr;
+}
+
+static inline int __prepare_ICR2 (unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+static inline void __send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+
+
+static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long cfg, flags;
+	unsigned long query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicast to each CPU instead.
+	 * - mbligh
+	 */
+	local_irq_save(flags);
+
+	for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
+		if (cpu_isset(query_cpu, mask)) {
+
+			/*
+			 * Wait for idle.
+			 */
+			apic_wait_icr_idle();
+
+			/*
+			 * prepare target chip field
+			 */
+			cfg = __prepare_ICR2(x86_cpu_to_apicid[query_cpu]);
+			apic_write_around(APIC_ICR2, cfg);
+
+			/*
+			 * program the ICR
+			 */
+			cfg = __prepare_ICR(0, vector, APIC_DEST_PHYSICAL);
+
+			/*
+			 * Send the IPI. The write to APIC_ICR fires this off.
+			 */
+			apic_write_around(APIC_ICR, cfg);
+		}
+	}
+	local_irq_restore(flags);
+}
+
+#endif /* __ASM_IPI_H */
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86_64/irq.h
new file mode 100644
index 000000000000..3af50b3c3b05
--- /dev/null
+++ b/include/asm-x86_64/irq.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+/*
+ *	linux/include/asm/irq.h
+ *
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+
+/*
+ * The maximum number of vectors supported by x86_64 processors
+ * is limited to 256. For processors other than x86_64, NR_VECTORS
+ * should be changed accordingly.
+ */
+#define NR_VECTORS 256
+
+#define FIRST_SYSTEM_VECTOR	0xef   /* duplicated in hw_irq.h */
+
+#ifdef CONFIG_PCI_MSI
+#define NR_IRQS FIRST_SYSTEM_VECTOR
+#define NR_IRQ_VECTORS NR_IRQS
+#else
+#define NR_IRQS 224
+#define NR_IRQ_VECTORS 1024
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return ((irq == 2) ? 9 : irq);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#define ARCH_HAS_NMI_WATCHDOG		/* See include/linux/nmi.h */
+#endif
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86_64/kdebug.h b/include/asm-x86_64/kdebug.h
new file mode 100644
index 000000000000..adb6f918d3ad
--- /dev/null
+++ b/include/asm-x86_64/kdebug.h
@@ -0,0 +1,53 @@
+#ifndef _X86_64_KDEBUG_H
+#define _X86_64_KDEBUG_H 1
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args { 
+	struct pt_regs *regs;
+	const char *str;
+	long err; 
+	int trapnr;
+	int signr;
+}; 
+
+/* Note - you should never unregister because that can race with NMIs.
+   If you really want to do it first unregister - then synchronize_kernel - then free. 
+  */
+int register_die_notifier(struct notifier_block *nb);
+extern struct notifier_block *die_chain;
+/* Grossly misnamed. */
+enum die_val { 
+	DIE_OOPS = 1,
+	DIE_INT3,
+	DIE_DEBUG,
+	DIE_DEBUGSTEP,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+	DIE_PAGE_FAULT,
+}; 
+	
+static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
+{ 
+	struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig }; 
+	return notifier_call_chain(&die_chain, val, &args); 
+} 
+
+extern int printk_address(unsigned long address);
+extern void die(const char *,struct pt_regs *,long);
+extern void __die(const char *,struct pt_regs *,long);
+extern void show_registers(struct pt_regs *regs);
+extern void dump_pagetable(unsigned long);
+extern void oops_begin(void);
+extern void oops_end(void);
+
+#endif
diff --git a/include/asm-x86_64/kmap_types.h b/include/asm-x86_64/kmap_types.h
new file mode 100644
index 000000000000..7486338c6cea
--- /dev/null
+++ b/include/asm-x86_64/kmap_types.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-x86_64/kprobes.h b/include/asm-x86_64/kprobes.h
new file mode 100644
index 000000000000..bfea52d516f8
--- /dev/null
+++ b/include/asm-x86_64/kprobes.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *  include/asm-x86_64/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2004-Oct	Prasanna S Panchamukhi <prasanna@in.ibm.com> and Jim Keniston
+ *		kenistoj@us.ibm.com adopted from i386.
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct pt_regs;
+
+typedef u8 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xcc
+#define MAX_INSN_SIZE 15
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)pentry
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t *insn;
+};
+
+/* trap3/1 are intr gates for kprobes.  So, restore the status of IF,
+ * if necessary, before executing the original int3/1 (trap) handler.
+ */
+static inline void restore_interrupts(struct pt_regs *regs)
+{
+	if (regs->eflags & IF_MASK)
+		local_irq_enable();
+}
+
+extern int post_kprobe_handler(struct pt_regs *regs);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_handler(struct pt_regs *regs);
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-x86_64/ldt.h b/include/asm-x86_64/ldt.h
new file mode 100644
index 000000000000..9ef647b890d2
--- /dev/null
+++ b/include/asm-x86_64/ldt.h
@@ -0,0 +1,36 @@
+/*
+ * ldt.h
+ *
+ * Definitions of structures used with the modify_ldt system call.
+ */
+#ifndef _LINUX_LDT_H
+#define _LINUX_LDT_H
+
+/* Maximum number of LDT entries supported. */
+#define LDT_ENTRIES	8192
+/* The size of each LDT entry. */
+#define LDT_ENTRY_SIZE	8
+
+#ifndef __ASSEMBLY__
+/* Note on 64bit base and limit is ignored and you cannot set
+   DS/ES/CS not to the default values if you still want to do syscalls. This
+   call is more for 32bit mode therefore. */
+struct user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+	unsigned int  lm:1;
+};
+
+#define MODIFY_LDT_CONTENTS_DATA	0
+#define MODIFY_LDT_CONTENTS_STACK	1
+#define MODIFY_LDT_CONTENTS_CODE	2
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/include/asm-x86_64/linkage.h b/include/asm-x86_64/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/include/asm-x86_64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-x86_64/local.h b/include/asm-x86_64/local.h
new file mode 100644
index 000000000000..169c223a8452
--- /dev/null
+++ b/include/asm-x86_64/local.h
@@ -0,0 +1,73 @@
+#ifndef _ARCH_X8664_LOCAL_H
+#define _ARCH_X8664_LOCAL_H
+
+#include <linux/percpu.h>
+
+typedef struct
+{
+	volatile unsigned int counter;
+} local_t;
+
+#define LOCAL_INIT(i)	{ (i) }
+
+#define local_read(v)	((v)->counter)
+#define local_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ void local_inc(local_t *v)
+{
+	__asm__ __volatile__(
+		"incl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+static __inline__ void local_dec(local_t *v)
+{
+	__asm__ __volatile__(
+		"decl %0"
+		:"=m" (v->counter)
+		:"m" (v->counter));
+}
+
+static __inline__ void local_add(unsigned long i, local_t *v)
+{
+	__asm__ __volatile__(
+		"addl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+static __inline__ void local_sub(unsigned long i, local_t *v)
+{
+	__asm__ __volatile__(
+		"subl %1,%0"
+		:"=m" (v->counter)
+		:"ir" (i), "m" (v->counter));
+}
+
+/* On x86, these are no better than the atomic variants. */
+#define __local_inc(l)		local_inc(l)
+#define __local_dec(l)		local_dec(l)
+#define __local_add(i,l)	local_add((i),(l))
+#define __local_sub(i,l)	local_sub((i),(l))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ *
+ * This could be done better if we moved the per cpu data directly
+ * after GS.
+ */
+#define cpu_local_read(v)	local_read(&__get_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__get_cpu_var(v), (i))
+#define cpu_local_inc(v)	local_inc(&__get_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__get_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__get_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__get_cpu_var(v))
+
+#define __cpu_local_inc(v)	cpu_local_inc(v)
+#define __cpu_local_dec(v)	cpu_local_dec(v)
+#define __cpu_local_add(i, v)	cpu_local_add((i), (v))
+#define __cpu_local_sub(i, v)	cpu_local_sub((i), (v))
+
+#endif /* _ARCH_I386_LOCAL_H */
diff --git a/include/asm-x86_64/mach_apic.h b/include/asm-x86_64/mach_apic.h
new file mode 100644
index 000000000000..0acea44c9377
--- /dev/null
+++ b/include/asm-x86_64/mach_apic.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch defines.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+
+#include <asm/genapic.h>
+
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#define INT_DELIVERY_DEST (genapic->int_delivery_dest)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define send_IPI_mask (genapic->send_IPI_mask)
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define phys_pkg_id	(genapic->phys_pkg_id)
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86_64/mc146818rtc.h b/include/asm-x86_64/mc146818rtc.h
new file mode 100644
index 000000000000..d6e3009430c1
--- /dev/null
+++ b/include/asm-x86_64/mc146818rtc.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-x86_64/mce.h b/include/asm-x86_64/mce.h
new file mode 100644
index 000000000000..869249db6795
--- /dev/null
+++ b/include/asm-x86_64/mce.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_MCE_H
+#define _ASM_MCE_H 1
+
+#include <asm/ioctls.h>
+#include <asm/types.h>
+
+/* 
+ * Machine Check support for x86
+ */
+
+#define MCG_CTL_P        (1UL<<8)   /* MCG_CAP register available */
+
+#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  (1UL<<1)   /* eip points to correct instruction */
+#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
+
+#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
+#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
+#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
+#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
+#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
+#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
+
+/* Fields are zero when not available */
+struct mce {
+	__u64 status;
+	__u64 misc;
+	__u64 addr;
+	__u64 mcgstatus;
+	__u64 rip;	
+	__u64 tsc;	/* cpu time stamp counter */
+	__u64 res1;	/* for future extension */	
+	__u64 res2;	/* dito. */
+	__u8  cs;		/* code segment */
+	__u8  bank;	/* machine check bank */
+	__u8  cpu;	/* cpu that raised the error */
+	__u8  finished;   /* entry is valid */
+	__u32 pad;   
+};
+
+/* 
+ * This structure contains all data related to the MCE log.
+ * Also carries a signature to make it easier to find from external debugging tools.
+ * Each entry is only valid when its finished flag is set.
+ */
+
+#define MCE_LOG_LEN 32
+
+struct mce_log { 
+	char signature[12]; /* "MACHINECHECK" */ 
+	unsigned len;  	    /* = MCE_LOG_LEN */ 
+	unsigned next;
+	unsigned flags;
+	unsigned pad0; 
+	struct mce entry[MCE_LOG_LEN];
+};
+
+#define MCE_OVERFLOW 0		/* bit 0 in flags means overflow */
+
+#define MCE_LOG_SIGNATURE 	"MACHINECHECK"
+
+#define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN      _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS   _IOR('M', 3, int)
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK	128
+#define MCE_THERMAL_BANK	MCE_EXTENDED_BANK + 0
+
+void mce_log(struct mce *m);
+#ifdef CONFIG_X86_MCE_INTEL
+void mce_intel_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_intel_feature_init(struct cpuinfo_x86 *c)
+{
+}
+#endif
+
+#endif
diff --git a/include/asm-x86_64/mman.h b/include/asm-x86_64/mman.h
new file mode 100644
index 000000000000..78e60a4fd4ee
--- /dev/null
+++ b/include/asm-x86_64/mman.h
@@ -0,0 +1,44 @@
+#ifndef __X8664_MMAN_H__
+#define __X8664_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_SEM	0x8
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif
diff --git a/include/asm-x86_64/mmsegment.h b/include/asm-x86_64/mmsegment.h
new file mode 100644
index 000000000000..d3f80c996330
--- /dev/null
+++ b/include/asm-x86_64/mmsegment.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_MMSEGMENT_H
+#define _ASM_MMSEGMENT_H 1
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#endif
diff --git a/include/asm-x86_64/mmu.h b/include/asm-x86_64/mmu.h
new file mode 100644
index 000000000000..5dc6ed79859a
--- /dev/null
+++ b/include/asm-x86_64/mmu.h
@@ -0,0 +1,20 @@
+#ifndef __x86_64_MMU_H
+#define __x86_64_MMU_H
+
+#include <linux/spinlock.h>
+#include <asm/semaphore.h>
+
+/*
+ * The x86_64 doesn't have a mmu context, but
+ * we put the segment information here.
+ *
+ * cpu_vm_mask is used to optimize ldt flushing.
+ */
+typedef struct { 
+	void *ldt;
+	rwlock_t ldtlock; 
+	int size;
+	struct semaphore sem; 
+} mm_context_t;
+
+#endif
diff --git a/include/asm-x86_64/mmu_context.h b/include/asm-x86_64/mmu_context.h
new file mode 100644
index 000000000000..b630d52bdfb1
--- /dev/null
+++ b/include/asm-x86_64/mmu_context.h
@@ -0,0 +1,79 @@
+#ifndef __X86_64_MMU_CONTEXT_H
+#define __X86_64_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * possibly do the LDT unload here?
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context(struct mm_struct *mm);
+
+#ifdef CONFIG_SMP
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	if (read_pda(mmu_state) == TLBSTATE_OK) 
+		write_pda(mmu_state, TLBSTATE_LAZY);
+}
+#else
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+#endif
+
+static inline void load_cr3(pgd_t *pgd)
+{
+	asm volatile("movq %0,%%cr3" :: "r" (__pa(pgd)) : "memory");
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		clear_bit(cpu, &prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		write_pda(mmu_state, TLBSTATE_OK);
+		write_pda(active_mm, next);
+#endif
+		set_bit(cpu, &next->cpu_vm_mask);
+		load_cr3(next->pgd);
+
+		if (unlikely(next->context.ldt != prev->context.ldt)) 
+			load_LDT_nolock(&next->context, cpu);
+	}
+#ifdef CONFIG_SMP
+	else {
+		write_pda(mmu_state, TLBSTATE_OK);
+		if (read_pda(active_mm) != next)
+			out_of_line_bug();
+		if(!test_and_set_bit(cpu, &next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled 
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context, cpu);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk,mm)	do { \
+	load_gs_index(0); \
+	asm volatile("movl %0,%%fs"::"r"(0));  \
+} while(0)
+
+#define activate_mm(prev, next) \
+	switch_mm((prev),(next),NULL)
+
+
+#endif
diff --git a/include/asm-x86_64/mmx.h b/include/asm-x86_64/mmx.h
new file mode 100644
index 000000000000..46b71da99869
--- /dev/null
+++ b/include/asm-x86_64/mmx.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_MMX_H
+#define _ASM_MMX_H
+
+/*
+ *	MMX 3Dnow! helper operations
+ */
+
+#include <linux/types.h>
+ 
+extern void *_mmx_memcpy(void *to, const void *from, size_t size);
+extern void mmx_clear_page(void *page);
+extern void mmx_copy_page(void *to, void *from);
+
+#endif
diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86_64/mmzone.h
new file mode 100644
index 000000000000..d95b7c240831
--- /dev/null
+++ b/include/asm-x86_64/mmzone.h
@@ -0,0 +1,63 @@
+/* K8 NUMA support */
+/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
+/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
+#ifndef _ASM_X86_64_MMZONE_H
+#define _ASM_X86_64_MMZONE_H 1
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define VIRTUAL_BUG_ON(x) 
+
+#include <asm/smp.h>
+
+#define NODEMAPSIZE 0xff
+
+/* Simple perfect hash to map physical addresses to node numbers */
+extern int memnode_shift; 
+extern u8  memnodemap[NODEMAPSIZE]; 
+extern int maxnode;
+
+extern struct pglist_data *node_data[];
+
+static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) 
+{ 
+	int nid; 
+	VIRTUAL_BUG_ON((addr >> memnode_shift) >= NODEMAPSIZE);
+	nid = memnodemap[addr >> memnode_shift]; 
+	VIRTUAL_BUG_ON(nid > maxnode); 
+	return nid; 
+} 
+
+#define pfn_to_nid(pfn) phys_to_nid((unsigned long)(pfn) << PAGE_SHIFT)
+
+#define kvaddr_to_nid(kaddr)	phys_to_nid(__pa(kaddr))
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#define node_mem_map(nid)	(NODE_DATA(nid)->node_mem_map)
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn + \
+				 NODE_DATA(nid)->node_spanned_pages)
+
+#define local_mapnr(kvaddr) \
+	( (__pa(kvaddr) >> PAGE_SHIFT) - node_start_pfn(kvaddr_to_nid(kvaddr)) )
+
+/* AK: this currently doesn't deal with invalid addresses. We'll see 
+   if the 2.5 kernel doesn't pass them
+   (2.4 used to). */
+#define pfn_to_page(pfn) ({ \
+	int nid = phys_to_nid(((unsigned long)(pfn)) << PAGE_SHIFT); 	\
+	((pfn) - node_start_pfn(nid)) + node_mem_map(nid);		\
+})
+
+#define page_to_pfn(page) \
+	(long)(((page) - page_zone(page)->zone_mem_map) + page_zone(page)->zone_start_pfn)
+
+#define pfn_valid(pfn) ((pfn) >= num_physpages ? 0 : \
+			({ u8 nid__ = pfn_to_nid(pfn); \
+			   nid__ != 0xff && (pfn) >= node_start_pfn(nid__) && (pfn) <= node_end_pfn(nid__); }))
+#endif
+#endif
diff --git a/include/asm-x86_64/module.h b/include/asm-x86_64/module.h
new file mode 100644
index 000000000000..67f8f69fa7b1
--- /dev/null
+++ b/include/asm-x86_64/module.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X8664_MODULE_H
+#define _ASM_X8664_MODULE_H
+
+struct mod_arch_specific {}; 
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#endif 
diff --git a/include/asm-x86_64/mpspec.h b/include/asm-x86_64/mpspec.h
new file mode 100644
index 000000000000..331f6a3c72a2
--- /dev/null
+++ b/include/asm-x86_64/mpspec.h
@@ -0,0 +1,241 @@
+#ifndef __ASM_MPSPEC_H
+#define __ASM_MPSPEC_H
+
+/*
+ * Structure definitions for SMP machines following the
+ * Intel Multiprocessing Specification 1.1 and 1.4.
+ */
+
+/*
+ * This tag identifies where the SMP configuration
+ * information is. 
+ */
+ 
+#define SMP_MAGIC_IDENT	(('_'<<24)|('P'<<16)|('M'<<8)|'_')
+
+/*
+ * A maximum of 255 APICs with the current APIC ID architecture.
+ */
+#define MAX_APICS 128
+
+struct intel_mp_floating
+{
+	char mpf_signature[4];		/* "_MP_" 			*/
+	unsigned int mpf_physptr;	/* Configuration table address	*/
+	unsigned char mpf_length;	/* Our length (paragraphs)	*/
+	unsigned char mpf_specification;/* Specification version	*/
+	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
+	unsigned char mpf_feature1;	/* Standard or configuration ? 	*/
+	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
+	unsigned char mpf_feature3;	/* Unused (0)			*/
+	unsigned char mpf_feature4;	/* Unused (0)			*/
+	unsigned char mpf_feature5;	/* Unused (0)			*/
+};
+
+struct mp_config_table
+{
+	char mpc_signature[4];
+#define MPC_SIGNATURE "PCMP"
+	unsigned short mpc_length;	/* Size of table */
+	char  mpc_spec;			/* 0x01 */
+	char  mpc_checksum;
+	char  mpc_oem[8];
+	char  mpc_productid[12];
+	unsigned int mpc_oemptr;	/* 0 if not present */
+	unsigned short mpc_oemsize;	/* 0 if not present */
+	unsigned short mpc_oemcount;
+	unsigned int mpc_lapic;	/* APIC address */
+	unsigned int reserved;
+};
+
+/* Followed by entries */
+
+#define	MP_PROCESSOR	0
+#define	MP_BUS		1
+#define	MP_IOAPIC	2
+#define	MP_INTSRC	3
+#define	MP_LINTSRC	4
+
+struct mpc_config_processor
+{
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;	/* Local APIC number */
+	unsigned char mpc_apicver;	/* Its versions */
+	unsigned char mpc_cpuflag;
+#define CPU_ENABLED		1	/* Processor is available */
+#define CPU_BOOTPROCESSOR	2	/* Processor is the BP */
+	unsigned int mpc_cpufeature;		
+#define CPU_STEPPING_MASK 0x0F
+#define CPU_MODEL_MASK	0xF0
+#define CPU_FAMILY_MASK	0xF00
+	unsigned int mpc_featureflag;	/* CPUID feature value */
+	unsigned int mpc_reserved[2];
+};
+
+struct mpc_config_bus
+{
+	unsigned char mpc_type;
+	unsigned char mpc_busid;
+	unsigned char mpc_bustype[6] __attribute((packed));
+};
+
+/* List of Bus Type string values, Intel MP Spec. */
+#define BUSTYPE_EISA	"EISA"
+#define BUSTYPE_ISA	"ISA"
+#define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
+#define BUSTYPE_MCA	"MCA"
+#define BUSTYPE_VL	"VL"		/* Local bus */
+#define BUSTYPE_PCI	"PCI"
+#define BUSTYPE_PCMCIA	"PCMCIA"
+#define BUSTYPE_CBUS	"CBUS"
+#define BUSTYPE_CBUSII	"CBUSII"
+#define BUSTYPE_FUTURE	"FUTURE"
+#define BUSTYPE_MBI	"MBI"
+#define BUSTYPE_MBII	"MBII"
+#define BUSTYPE_MPI	"MPI"
+#define BUSTYPE_MPSA	"MPSA"
+#define BUSTYPE_NUBUS	"NUBUS"
+#define BUSTYPE_TC	"TC"
+#define BUSTYPE_VME	"VME"
+#define BUSTYPE_XPRESS	"XPRESS"
+
+struct mpc_config_ioapic
+{
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;
+	unsigned char mpc_apicver;
+	unsigned char mpc_flags;
+#define MPC_APIC_USABLE		0x01
+	unsigned int mpc_apicaddr;
+};
+
+struct mpc_config_intsrc
+{
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbus;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_dstapic;
+	unsigned char mpc_dstirq;
+};
+
+enum mp_irq_source_types {
+	mp_INT = 0,
+	mp_NMI = 1,
+	mp_SMI = 2,
+	mp_ExtINT = 3
+};
+
+#define MP_IRQDIR_DEFAULT	0
+#define MP_IRQDIR_HIGH		1
+#define MP_IRQDIR_LOW		3
+
+
+struct mpc_config_lintsrc
+{
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbusid;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_destapic;	
+#define MP_APIC_ALL	0xFF
+	unsigned char mpc_destapiclint;
+};
+
+/*
+ *	Default configurations
+ *
+ *	1	2 CPU ISA 82489DX
+ *	2	2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
+ *	3	2 CPU EISA 82489DX
+ *	4	2 CPU MCA 82489DX
+ *	5	2 CPU ISA+PCI
+ *	6	2 CPU EISA+PCI
+ *	7	2 CPU MCA+PCI
+ */
+
+#define MAX_MP_BUSSES 256
+#define MAX_IRQ_SOURCES 256
+enum mp_bustype {
+	MP_BUS_ISA = 1,
+	MP_BUS_EISA,
+	MP_BUS_PCI,
+	MP_BUS_MCA
+};
+extern unsigned char mp_bus_id_to_type [MAX_MP_BUSSES];
+extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
+
+extern unsigned int boot_cpu_physical_apicid;
+extern int smp_found_config;
+extern void find_smp_config (void);
+extern void get_smp_config (void);
+extern int nr_ioapics;
+extern int apic_version [MAX_APICS];
+extern int mp_irq_entries;
+extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES];
+extern int mpc_default_type;
+extern unsigned long mp_lapic_addr;
+extern int pic_mode;
+
+#ifdef CONFIG_ACPI_BOOT
+extern void mp_register_lapic (u8 id, u8 enabled);
+extern void mp_register_lapic_address (u64 address);
+
+#ifdef CONFIG_X86_IO_APIC
+extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
+extern void mp_config_acpi_legacy_irqs (void);
+extern int mp_register_gsi (u32 gsi, int edge_level, int active_high_low);
+#endif /*CONFIG_X86_IO_APIC*/
+#endif
+
+extern int using_apic_timer;
+
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+
+struct physid_mask
+{
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)			set_bit(physid, (map).mask)
+#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)		test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)	test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)		bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_or(dst, src1, src2)		bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_clear(map)			bitmap_zero((map).mask, MAX_APICS)
+#define physids_complement(dst, src)		bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+#define physids_empty(map)			bitmap_empty((map).mask, MAX_APICS)
+#define physids_equal(map1, map2)		bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+#define physids_weight(map)			bitmap_weight((map).mask, MAX_APICS)
+#define physids_shift_right(d, s, n)		bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+#define physids_shift_left(d, s, n)		bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+#define physids_coerce(map)			((map).mask[0])
+
+#define physids_promote(physids)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		__physid_mask.mask[0] = physids;				\
+		__physid_mask;							\
+	})
+
+#define physid_mask_of_physid(physid)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		physid_set(physid, __physid_mask);				\
+		__physid_mask;							\
+	})
+
+#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+#endif
+
diff --git a/include/asm-x86_64/msgbuf.h b/include/asm-x86_64/msgbuf.h
new file mode 100644
index 000000000000..cd6f95dd54da
--- /dev/null
+++ b/include/asm-x86_64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _X8664_MSGBUF_H
+#define _X8664_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for x86-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif
diff --git a/include/asm-x86_64/msi.h b/include/asm-x86_64/msi.h
new file mode 100644
index 000000000000..85c427e472bf
--- /dev/null
+++ b/include/asm-x86_64/msi.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2003-2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef ASM_MSI_H
+#define ASM_MSI_H
+
+#include <asm/desc.h>
+#include <asm/mach_apic.h>
+#include <asm/smp.h>
+
+#define LAST_DEVICE_VECTOR		232
+#define MSI_DEST_MODE			MSI_LOGICAL_MODE
+#define MSI_TARGET_CPU_SHIFT		12
+#define MSI_TARGET_CPU			logical_smp_processor_id()
+
+#endif /* ASM_MSI_H */
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h
new file mode 100644
index 000000000000..66f0be191ab4
--- /dev/null
+++ b/include/asm-x86_64/msr.h
@@ -0,0 +1,387 @@
+#ifndef X86_64_MSR_H
+#define X86_64_MSR_H 1
+
+#ifndef __ASSEMBLY__
+/*
+ * Access to machine-specific registers (available on 586 and better only)
+ * Note: the rd* operations modify the parameters directly (without using
+ * pointer indirection), this allows gcc to optimize better
+ */
+
+#define rdmsr(msr,val1,val2) \
+       __asm__ __volatile__("rdmsr" \
+			    : "=a" (val1), "=d" (val2) \
+			    : "c" (msr))
+
+
+#define rdmsrl(msr,val) do { unsigned long a__,b__; \
+       __asm__ __volatile__("rdmsr" \
+			    : "=a" (a__), "=d" (b__) \
+			    : "c" (msr)); \
+       val = a__ | (b__<<32); \
+} while(0); 
+
+#define wrmsr(msr,val1,val2) \
+     __asm__ __volatile__("wrmsr" \
+			  : /* no outputs */ \
+			  : "c" (msr), "a" (val1), "d" (val2))
+
+#define wrmsrl(msr,val) wrmsr(msr,(__u32)((__u64)(val)),((__u64)(val))>>32) 
+
+/* wrmsr with exception handling */
+#define wrmsr_safe(msr,a,b) ({ int ret__;						\
+	asm volatile("2: wrmsr ; xorl %0,%0\n"						\
+		     "1:\n\t"								\
+		     ".section .fixup,\"ax\"\n\t"					\
+		     "3:  movl %4,%0 ; jmp 1b\n\t"					\
+		     ".previous\n\t"							\
+ 		     ".section __ex_table,\"a\"\n"					\
+		     "   .align 8\n\t"							\
+		     "   .quad 	2b,3b\n\t"						\
+		     ".previous"							\
+		     : "=a" (ret__)							\
+		     : "c" (msr), "0" (a), "d" (b), "i" (-EFAULT));\
+	ret__; })
+
+#define checking_wrmsrl(msr,val) wrmsr_safe(msr,(u32)(val),(u32)((val)>>32))
+
+#define rdtsc(low,high) \
+     __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))
+
+#define rdtscl(low) \
+     __asm__ __volatile__ ("rdtsc" : "=a" (low) : : "edx")
+
+#define rdtscll(val) do { \
+     unsigned int __a,__d; \
+     asm volatile("rdtsc" : "=a" (__a), "=d" (__d)); \
+     (val) = ((unsigned long)__a) | (((unsigned long)__d)<<32); \
+} while(0)
+
+#define rdpmc(counter,low,high) \
+     __asm__ __volatile__("rdpmc" \
+			  : "=a" (low), "=d" (high) \
+			  : "c" (counter))
+
+#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
+
+#define rdpmc(counter,low,high) \
+     __asm__ __volatile__("rdpmc" \
+			  : "=a" (low), "=d" (high) \
+			  : "c" (counter))
+
+extern inline void cpuid(int op, unsigned int *eax, unsigned int *ebx,
+			 unsigned int *ecx, unsigned int *edx)
+{
+	__asm__("cpuid"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (op));
+}
+
+/* Some CPUID calls want 'count' to be placed in ecx */
+static inline void cpuid_count(int op, int count, int *eax, int *ebx, int *ecx,
+	       	int *edx)
+{
+	__asm__("cpuid"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (op), "c" (count));
+}
+
+/*
+ * CPUID functions returning a single datum
+ */
+extern inline unsigned int cpuid_eax(unsigned int op)
+{
+	unsigned int eax;
+
+	__asm__("cpuid"
+		: "=a" (eax)
+		: "0" (op)
+		: "bx", "cx", "dx");
+	return eax;
+}
+extern inline unsigned int cpuid_ebx(unsigned int op)
+{
+	unsigned int eax, ebx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=b" (ebx)
+		: "0" (op)
+		: "cx", "dx" );
+	return ebx;
+}
+extern inline unsigned int cpuid_ecx(unsigned int op)
+{
+	unsigned int eax, ecx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=c" (ecx)
+		: "0" (op)
+		: "bx", "dx" );
+	return ecx;
+}
+extern inline unsigned int cpuid_edx(unsigned int op)
+{
+	unsigned int eax, edx;
+
+	__asm__("cpuid"
+		: "=a" (eax), "=d" (edx)
+		: "0" (op)
+		: "bx", "cx");
+	return edx;
+}
+
+#define MSR_IA32_UCODE_WRITE		0x79
+#define MSR_IA32_UCODE_REV		0x8b
+
+
+#endif
+
+/* AMD/K8 specific MSRs */ 
+#define MSR_EFER 0xc0000080		/* extended feature register */
+#define MSR_STAR 0xc0000081		/* legacy mode SYSCALL target */
+#define MSR_LSTAR 0xc0000082 		/* long mode SYSCALL target */
+#define MSR_CSTAR 0xc0000083		/* compatibility mode SYSCALL target */
+#define MSR_SYSCALL_MASK 0xc0000084	/* EFLAGS mask for syscall */
+#define MSR_FS_BASE 0xc0000100		/* 64bit GS base */
+#define MSR_GS_BASE 0xc0000101		/* 64bit FS base */
+#define MSR_KERNEL_GS_BASE  0xc0000102	/* SwapGS GS shadow (or USER_GS from kernel) */ 
+/* EFER bits: */ 
+#define _EFER_SCE 0  /* SYSCALL/SYSRET */
+#define _EFER_LME 8  /* Long mode enable */
+#define _EFER_LMA 10 /* Long mode active (read-only) */
+#define _EFER_NX 11  /* No execute enable */
+
+#define EFER_SCE (1<<_EFER_SCE)
+#define EFER_LME (1<<_EFER_LME)
+#define EFER_LMA (1<<_EFER_LMA)
+#define EFER_NX (1<<_EFER_NX)
+
+/* Intel MSRs. Some also available on other CPUs */
+#define MSR_IA32_PLATFORM_ID	0x17
+
+#define MSR_IA32_PERFCTR0      0xc1
+#define MSR_IA32_PERFCTR1      0xc2
+
+#define MSR_MTRRcap		0x0fe
+#define MSR_IA32_BBL_CR_CTL        0x119
+
+#define MSR_IA32_SYSENTER_CS	0x174
+#define MSR_IA32_SYSENTER_ESP	0x175
+#define MSR_IA32_SYSENTER_EIP	0x176
+
+#define MSR_IA32_MCG_CAP       0x179
+#define MSR_IA32_MCG_STATUS        0x17a
+#define MSR_IA32_MCG_CTL       0x17b
+
+#define MSR_IA32_EVNTSEL0      0x186
+#define MSR_IA32_EVNTSEL1      0x187
+
+#define MSR_IA32_DEBUGCTLMSR       0x1d9
+#define MSR_IA32_LASTBRANCHFROMIP  0x1db
+#define MSR_IA32_LASTBRANCHTOIP        0x1dc
+#define MSR_IA32_LASTINTFROMIP     0x1dd
+#define MSR_IA32_LASTINTTOIP       0x1de
+
+#define MSR_MTRRfix64K_00000	0x250
+#define MSR_MTRRfix16K_80000	0x258
+#define MSR_MTRRfix16K_A0000	0x259
+#define MSR_MTRRfix4K_C0000	0x268
+#define MSR_MTRRfix4K_C8000	0x269
+#define MSR_MTRRfix4K_D0000	0x26a
+#define MSR_MTRRfix4K_D8000	0x26b
+#define MSR_MTRRfix4K_E0000	0x26c
+#define MSR_MTRRfix4K_E8000	0x26d
+#define MSR_MTRRfix4K_F0000	0x26e
+#define MSR_MTRRfix4K_F8000	0x26f
+#define MSR_MTRRdefType		0x2ff
+
+#define MSR_IA32_MC0_CTL       0x400
+#define MSR_IA32_MC0_STATUS        0x401
+#define MSR_IA32_MC0_ADDR      0x402
+#define MSR_IA32_MC0_MISC      0x403
+
+#define MSR_P6_PERFCTR0			0xc1
+#define MSR_P6_PERFCTR1			0xc2
+#define MSR_P6_EVNTSEL0			0x186
+#define MSR_P6_EVNTSEL1			0x187
+
+/* K7/K8 MSRs. Not complete. See the architecture manual for a more complete list. */
+#define MSR_K7_EVNTSEL0            0xC0010000
+#define MSR_K7_PERFCTR0            0xC0010004
+#define MSR_K7_EVNTSEL1            0xC0010001
+#define MSR_K7_PERFCTR1            0xC0010005
+#define MSR_K7_EVNTSEL2            0xC0010002
+#define MSR_K7_PERFCTR2            0xC0010006
+#define MSR_K7_EVNTSEL3            0xC0010003
+#define MSR_K7_PERFCTR3            0xC0010007
+#define MSR_K8_TOP_MEM1		   0xC001001A
+#define MSR_K8_TOP_MEM2		   0xC001001D
+#define MSR_K8_SYSCFG		   0xC0000010	
+
+/* K6 MSRs */
+#define MSR_K6_EFER			0xC0000080
+#define MSR_K6_STAR			0xC0000081
+#define MSR_K6_WHCR			0xC0000082
+#define MSR_K6_UWCCR			0xC0000085
+#define MSR_K6_PSOR			0xC0000087
+#define MSR_K6_PFIR			0xC0000088
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1			0x107
+#define MSR_IDT_FCR2			0x108
+#define MSR_IDT_FCR3			0x109
+#define MSR_IDT_FCR4			0x10a
+
+#define MSR_IDT_MCR0			0x110
+#define MSR_IDT_MCR1			0x111
+#define MSR_IDT_MCR2			0x112
+#define MSR_IDT_MCR3			0x113
+#define MSR_IDT_MCR4			0x114
+#define MSR_IDT_MCR5			0x115
+#define MSR_IDT_MCR6			0x116
+#define MSR_IDT_MCR7			0x117
+#define MSR_IDT_MCR_CTRL		0x120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR			0x1107
+#define MSR_VIA_LONGHAUL		0x110a
+#define MSR_VIA_RNG			0x110b
+#define MSR_VIA_BCR2			0x1147
+
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR		0
+#define MSR_IA32_P5_MC_TYPE		1
+#define MSR_IA32_PLATFORM_ID		0x17
+#define MSR_IA32_EBL_CR_POWERON		0x2a
+
+#define MSR_IA32_APICBASE               0x1b
+#define MSR_IA32_APICBASE_BSP           (1<<8)
+#define MSR_IA32_APICBASE_ENABLE        (1<<11)
+#define MSR_IA32_APICBASE_BASE          (0xfffff<<12)
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX		0x180
+#define MSR_IA32_MCG_EBX		0x181
+#define MSR_IA32_MCG_ECX		0x182
+#define MSR_IA32_MCG_EDX		0x183
+#define MSR_IA32_MCG_ESI		0x184
+#define MSR_IA32_MCG_EDI		0x185
+#define MSR_IA32_MCG_EBP		0x186
+#define MSR_IA32_MCG_ESP		0x187
+#define MSR_IA32_MCG_EFLAGS		0x188
+#define MSR_IA32_MCG_EIP		0x189
+#define MSR_IA32_MCG_RESERVED		0x18A
+
+#define MSR_P6_EVNTSEL0			0x186
+#define MSR_P6_EVNTSEL1			0x187
+
+#define MSR_IA32_PERF_STATUS		0x198
+#define MSR_IA32_PERF_CTL		0x199
+
+#define MSR_IA32_THERM_CONTROL		0x19a
+#define MSR_IA32_THERM_INTERRUPT	0x19b
+#define MSR_IA32_THERM_STATUS		0x19c
+#define MSR_IA32_MISC_ENABLE		0x1a0
+
+#define MSR_IA32_DEBUGCTLMSR		0x1d9
+#define MSR_IA32_LASTBRANCHFROMIP	0x1db
+#define MSR_IA32_LASTBRANCHTOIP		0x1dc
+#define MSR_IA32_LASTINTFROMIP		0x1dd
+#define MSR_IA32_LASTINTTOIP		0x1de
+
+#define MSR_IA32_MC0_CTL		0x400
+#define MSR_IA32_MC0_STATUS		0x401
+#define MSR_IA32_MC0_ADDR		0x402
+#define MSR_IA32_MC0_MISC		0x403
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0 		0x300
+#define MSR_P4_BPU_PERFCTR1 		0x301
+#define MSR_P4_BPU_PERFCTR2 		0x302
+#define MSR_P4_BPU_PERFCTR3 		0x303
+#define MSR_P4_MS_PERFCTR0 		0x304
+#define MSR_P4_MS_PERFCTR1 		0x305
+#define MSR_P4_MS_PERFCTR2 		0x306
+#define MSR_P4_MS_PERFCTR3 		0x307
+#define MSR_P4_FLAME_PERFCTR0 		0x308
+#define MSR_P4_FLAME_PERFCTR1 		0x309
+#define MSR_P4_FLAME_PERFCTR2 		0x30a
+#define MSR_P4_FLAME_PERFCTR3 		0x30b
+#define MSR_P4_IQ_PERFCTR0 		0x30c
+#define MSR_P4_IQ_PERFCTR1 		0x30d
+#define MSR_P4_IQ_PERFCTR2 		0x30e
+#define MSR_P4_IQ_PERFCTR3 		0x30f
+#define MSR_P4_IQ_PERFCTR4 		0x310
+#define MSR_P4_IQ_PERFCTR5 		0x311
+#define MSR_P4_BPU_CCCR0 		0x360
+#define MSR_P4_BPU_CCCR1 		0x361
+#define MSR_P4_BPU_CCCR2 		0x362
+#define MSR_P4_BPU_CCCR3 		0x363
+#define MSR_P4_MS_CCCR0 		0x364
+#define MSR_P4_MS_CCCR1 		0x365
+#define MSR_P4_MS_CCCR2 		0x366
+#define MSR_P4_MS_CCCR3 		0x367
+#define MSR_P4_FLAME_CCCR0 		0x368
+#define MSR_P4_FLAME_CCCR1 		0x369
+#define MSR_P4_FLAME_CCCR2 		0x36a
+#define MSR_P4_FLAME_CCCR3 		0x36b
+#define MSR_P4_IQ_CCCR0 		0x36c
+#define MSR_P4_IQ_CCCR1 		0x36d
+#define MSR_P4_IQ_CCCR2 		0x36e
+#define MSR_P4_IQ_CCCR3 		0x36f
+#define MSR_P4_IQ_CCCR4 		0x370
+#define MSR_P4_IQ_CCCR5 		0x371
+#define MSR_P4_ALF_ESCR0 		0x3ca
+#define MSR_P4_ALF_ESCR1 		0x3cb
+#define MSR_P4_BPU_ESCR0 		0x3b2
+#define MSR_P4_BPU_ESCR1 		0x3b3
+#define MSR_P4_BSU_ESCR0 		0x3a0
+#define MSR_P4_BSU_ESCR1 		0x3a1
+#define MSR_P4_CRU_ESCR0 		0x3b8
+#define MSR_P4_CRU_ESCR1 		0x3b9
+#define MSR_P4_CRU_ESCR2 		0x3cc
+#define MSR_P4_CRU_ESCR3 		0x3cd
+#define MSR_P4_CRU_ESCR4 		0x3e0
+#define MSR_P4_CRU_ESCR5 		0x3e1
+#define MSR_P4_DAC_ESCR0 		0x3a8
+#define MSR_P4_DAC_ESCR1 		0x3a9
+#define MSR_P4_FIRM_ESCR0 		0x3a4
+#define MSR_P4_FIRM_ESCR1 		0x3a5
+#define MSR_P4_FLAME_ESCR0 		0x3a6
+#define MSR_P4_FLAME_ESCR1 		0x3a7
+#define MSR_P4_FSB_ESCR0 		0x3a2
+#define MSR_P4_FSB_ESCR1 		0x3a3
+#define MSR_P4_IQ_ESCR0 		0x3ba
+#define MSR_P4_IQ_ESCR1 		0x3bb
+#define MSR_P4_IS_ESCR0 		0x3b4
+#define MSR_P4_IS_ESCR1 		0x3b5
+#define MSR_P4_ITLB_ESCR0 		0x3b6
+#define MSR_P4_ITLB_ESCR1 		0x3b7
+#define MSR_P4_IX_ESCR0 		0x3c8
+#define MSR_P4_IX_ESCR1 		0x3c9
+#define MSR_P4_MOB_ESCR0 		0x3aa
+#define MSR_P4_MOB_ESCR1 		0x3ab
+#define MSR_P4_MS_ESCR0 		0x3c0
+#define MSR_P4_MS_ESCR1 		0x3c1
+#define MSR_P4_PMH_ESCR0 		0x3ac
+#define MSR_P4_PMH_ESCR1 		0x3ad
+#define MSR_P4_RAT_ESCR0 		0x3bc
+#define MSR_P4_RAT_ESCR1 		0x3bd
+#define MSR_P4_SAAT_ESCR0 		0x3ae
+#define MSR_P4_SAAT_ESCR1 		0x3af
+#define MSR_P4_SSU_ESCR0 		0x3be
+#define MSR_P4_SSU_ESCR1 		0x3bf    /* guess: not defined in manual */
+#define MSR_P4_TBPU_ESCR0 		0x3c2
+#define MSR_P4_TBPU_ESCR1 		0x3c3
+#define MSR_P4_TC_ESCR0 		0x3c4
+#define MSR_P4_TC_ESCR1 		0x3c5
+#define MSR_P4_U2L_ESCR0 		0x3b0
+#define MSR_P4_U2L_ESCR1 		0x3b1
+
+#endif
diff --git a/include/asm-x86_64/mtrr.h b/include/asm-x86_64/mtrr.h
new file mode 100644
index 000000000000..c5959d6418bb
--- /dev/null
+++ b/include/asm-x86_64/mtrr.h
@@ -0,0 +1,108 @@
+/*  Generic MTRR (Memory Type Range Register) ioctls.
+
+    Copyright (C) 1997-1999  Richard Gooch
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _LINUX_MTRR_H
+#define _LINUX_MTRR_H
+
+#include <linux/config.h>
+#include <linux/ioctl.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+struct mtrr_sentry
+{
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+/* Warning: this structure has a different order from i386
+   on x86-64. The 32bit emulation code takes care of that.
+   But you need to use this for 64bit, otherwise your X server
+   will break. */
+struct mtrr_gentry
+{
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int regnum;   /*  Register number  */
+    unsigned int type;     /*  Type of region   */
+};
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/*  These are the region types  */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+#ifdef __KERNEL__
+
+/*  The following functions are for use by other drivers  */
+# ifdef CONFIG_MTRR
+extern int mtrr_add (unsigned long base, unsigned long size,
+		     unsigned int type, char increment);
+extern int mtrr_add_page (unsigned long base, unsigned long size,
+		     unsigned int type, char increment);
+extern int mtrr_del (int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page (int reg, unsigned long base, unsigned long size);
+#  else
+static __inline__ int mtrr_add (unsigned long base, unsigned long size,
+				unsigned int type, char increment)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_add_page (unsigned long base, unsigned long size,
+				unsigned int type, char increment)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_del (int reg, unsigned long base,
+				unsigned long size)
+{
+    return -ENODEV;
+}
+static __inline__ int mtrr_del_page (int reg, unsigned long base,
+				unsigned long size)
+{
+    return -ENODEV;
+}
+
+#  endif
+
+#endif
+
+#endif  /*  _LINUX_MTRR_H  */
diff --git a/include/asm-x86_64/namei.h b/include/asm-x86_64/namei.h
new file mode 100644
index 000000000000..bef239f5318f
--- /dev/null
+++ b/include/asm-x86_64/namei.h
@@ -0,0 +1,11 @@
+#ifndef __X8664_NAMEI_H
+#define __X8664_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86_64/nmi.h
new file mode 100644
index 000000000000..21d56b086b9d
--- /dev/null
+++ b/include/asm-x86_64/nmi.h
@@ -0,0 +1,57 @@
+/*
+ *  linux/include/asm-i386/nmi.h
+ */
+#ifndef ASM_NMI_H
+#define ASM_NMI_H
+
+#include <linux/pm.h>
+ 
+struct pt_regs;
+ 
+typedef int (*nmi_callback_t)(struct pt_regs * regs, int cpu);
+ 
+/** 
+ * set_nmi_callback
+ *
+ * Set a handler for an NMI. Only one handler may be
+ * set. Return 1 if the NMI was handled.
+ */
+void set_nmi_callback(nmi_callback_t callback);
+ 
+/** 
+ * unset_nmi_callback
+ *
+ * Remove the handler previously set.
+ */
+void unset_nmi_callback(void);
+ 
+#ifdef CONFIG_PM
+ 
+/** Replace the PM callback routine for NMI. */
+struct pm_dev * set_nmi_pm_callback(pm_callback callback);
+
+/** Unset the PM callback routine back to the default. */
+void unset_nmi_pm_callback(struct pm_dev * dev);
+
+#else
+
+static inline struct pm_dev * set_nmi_pm_callback(pm_callback callback)
+{
+	return 0;
+} 
+ 
+static inline void unset_nmi_pm_callback(struct pm_dev * dev)
+{
+}
+
+#endif /* CONFIG_PM */
+ 
+extern void default_do_nmi(struct pt_regs *);
+extern void die_nmi(char *str, struct pt_regs *regs);
+
+#define get_nmi_reason() inb(0x61)
+
+extern int panic_on_timeout;
+extern int unknown_nmi_panic;
+ 
+#endif /* ASM_NMI_H */
diff --git a/include/asm-x86_64/node.h b/include/asm-x86_64/node.h
new file mode 100644
index 000000000000..0ee6f88db048
--- /dev/null
+++ b/include/asm-x86_64/node.h
@@ -0,0 +1 @@
+#include <asm-i386/node.h>
diff --git a/include/asm-x86_64/numa.h b/include/asm-x86_64/numa.h
new file mode 100644
index 000000000000..5c363a1482e4
--- /dev/null
+++ b/include/asm-x86_64/numa.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X8664_NUMA_H 
+#define _ASM_X8664_NUMA_H 1
+
+#include <linux/nodemask.h>
+#include <asm/numnodes.h>
+
+struct node { 
+	u64 start,end; 
+};
+
+extern int compute_hash_shift(struct node *nodes, int numnodes);
+
+#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
+
+extern void numa_add_cpu(int cpu);
+extern void numa_init_array(void);
+extern int numa_off;
+
+#define NUMA_NO_NODE 0xff
+
+#endif
diff --git a/include/asm-x86_64/numnodes.h b/include/asm-x86_64/numnodes.h
new file mode 100644
index 000000000000..32be16b8ae96
--- /dev/null
+++ b/include/asm-x86_64/numnodes.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X8664_NUMNODES_H
+#define _ASM_X8664_NUMNODES_H 1
+
+#include <linux/config.h>
+
+#ifdef CONFIG_NUMA
+#define NODES_SHIFT	6
+#else
+#define NODES_SHIFT	0
+#endif
+
+#endif
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
new file mode 100644
index 000000000000..f43048035a03
--- /dev/null
+++ b/include/asm-x86_64/page.h
@@ -0,0 +1,139 @@
+#ifndef _X86_64_PAGE_H
+#define _X86_64_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(0x1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PHYSICAL_PAGE_MASK	(~(PAGE_SIZE-1) & (__PHYSICAL_MASK << PAGE_SHIFT))
+
+#define THREAD_ORDER 1 
+#ifdef __ASSEMBLY__
+#define THREAD_SIZE  (1 << (PAGE_SHIFT + THREAD_ORDER))
+#else
+#define THREAD_SIZE  (1UL << (PAGE_SHIFT + THREAD_ORDER))
+#endif
+#define CURRENT_MASK (~(THREAD_SIZE-1))
+
+#define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1))
+#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT)
+
+#define HPAGE_SHIFT PMD_SHIFT
+#define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+void clear_page(void *);
+void copy_page(void *, void *);
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pud; } pud_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define PTE_MASK	PHYSICAL_PAGE_MASK
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pud_val(x)	((x).pud)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pud(x) ((pud_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#define __START_KERNEL		0xffffffff80100000UL
+#define __START_KERNEL_map	0xffffffff80000000UL
+#define __PAGE_OFFSET           0xffff810000000000UL
+
+#else
+#define __START_KERNEL		0xffffffff80100000
+#define __START_KERNEL_map	0xffffffff80000000
+#define __PAGE_OFFSET           0xffff810000000000
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+#define __PHYSICAL_MASK_SHIFT	46
+#define __PHYSICAL_MASK		((1UL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK_SHIFT	48
+#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+#define KERNEL_TEXT_SIZE  (40UL*1024*1024)
+#define KERNEL_TEXT_START 0xffffffff80000000UL 
+
+#ifndef __ASSEMBLY__
+
+#include <asm/bug.h>
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol.
+   Otherwise you risk miscompilation. */ 
+#define __pa(x)			(((unsigned long)(x)>=__START_KERNEL_map)?(unsigned long)(x) - (unsigned long)__START_KERNEL_map:(unsigned long)(x) - PAGE_OFFSET)
+/* __pa_symbol should be used for C visible symbols.
+   This seems to be the official gcc blessed way to do such arithmetic. */ 
+#define __pa_symbol(x)		\
+	({unsigned long v;  \
+	  asm("" : "=r" (v) : "0" (x)); \
+	  __pa(v); })
+
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_to_page(pfn)	(mem_map + (pfn))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map))
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define __HAVE_ARCH_GATE_AREA 1	
+
+#endif /* __KERNEL__ */
+
+#endif /* _X86_64_PAGE_H */
diff --git a/include/asm-x86_64/param.h b/include/asm-x86_64/param.h
new file mode 100644
index 000000000000..b707f0568c9e
--- /dev/null
+++ b/include/asm-x86_64/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMx86_64_PARAM_H
+#define _ASMx86_64_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ            1000            /* Internal kernel timer frequency */
+# define USER_HZ       100          /* .. some user interfaces are in "ticks */
+#define CLOCKS_PER_SEC        (USER_HZ)       /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/include/asm-x86_64/parport.h b/include/asm-x86_64/parport.h
new file mode 100644
index 000000000000..7135ef977c96
--- /dev/null
+++ b/include/asm-x86_64/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: ia32-specific parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_X8664_PARPORT_H
+#define _ASM_X8664_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif 
diff --git a/include/asm-x86_64/pci-direct.h b/include/asm-x86_64/pci-direct.h
new file mode 100644
index 000000000000..036b6ca5b53b
--- /dev/null
+++ b/include/asm-x86_64/pci-direct.h
@@ -0,0 +1,48 @@
+#ifndef ASM_PCI_DIRECT_H
+#define ASM_PCI_DIRECT_H 1
+
+#include <linux/types.h>
+#include <asm/io.h>
+
+/* Direct PCI access. This is used for PCI accesses in early boot before
+   the PCI subsystem works. */ 
+
+#define PDprintk(x...)
+
+static inline u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
+{
+	u32 v; 
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	v = inl(0xcfc); 
+	if (v != 0xffffffff)
+		PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+	return v;
+}
+
+static inline u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
+{
+	u8 v; 
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	v = inb(0xcfc + (offset&3)); 
+	PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+	return v;
+}
+
+static inline u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
+{
+	u16 v; 
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	v = inw(0xcfc + (offset&2)); 
+	PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+	return v;
+}
+
+static inline void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
+				    u32 val)
+{
+	PDprintk("%x writing to %x: %x\n", slot, offset, val); 
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	outl(val, 0xcfc); 
+}
+
+#endif
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
new file mode 100644
index 000000000000..8712520ca47f
--- /dev/null
+++ b/include/asm-x86_64/pci.h
@@ -0,0 +1,141 @@
+#ifndef __x8664_PCI_H
+#define __x8664_PCI_H
+
+#include <linux/config.h>
+#include <asm/io.h>
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h> /* for struct page */
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+extern unsigned int pcibios_assign_all_busses(void);
+#else
+#define pcibios_assign_all_busses()	0
+#endif
+#define pcibios_scan_all_fns(a, b)	0
+
+extern int no_iommu, force_iommu;
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		(pci_mem_start)
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+void pcibios_config_init(void);
+struct pci_bus * pcibios_scan_root(int bus);
+extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
+extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+struct irq_routing_table *pcibios_get_irq_routing_table(void);
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/page.h>
+
+extern int iommu_setup(char *opt);
+
+#ifdef CONFIG_GART_IOMMU
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions
+ *
+ * On AMD64 it mostly equals, but we set it to zero to tell some subsystems
+ * that an IOMMU is available.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(no_iommu ? 1 : 0)
+
+/*
+ * x86-64 always supports DAC, but sometimes it is useful to force
+ * devices through the IOMMU to get automatic sg list merging.
+ * Optional right now.
+ */
+extern int iommu_sac_force;
+#define pci_dac_dma_supported(pci_dev, mask)	(!iommu_sac_force)
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else
+/* No IOMMU */
+
+#define PCI_DMA_BUS_IS_PHYS	1
+#define pci_dac_dma_supported(pci_dev, mask)    1
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif
+
+#include <asm-generic/pci-dma-compat.h>
+
+static inline dma64_addr_t
+pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
+{
+	return ((dma64_addr_t) page_to_phys(page) +
+		(dma64_addr_t) offset);
+}
+
+static inline struct page *
+pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	return virt_to_page(__va(dma_addr)); 	
+}
+
+static inline unsigned long
+pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+	return (dma_addr & ~PAGE_MASK);
+}
+
+static inline void
+pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+}
+
+static inline void
+pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+	flush_write_buffers();
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state, int write_combine);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#ifdef CONFIG_PCI
+#include <asm-generic/pci.h>
+#endif
+
+#endif /* __x8664_PCI_H */
diff --git a/include/asm-x86_64/pda.h b/include/asm-x86_64/pda.h
new file mode 100644
index 000000000000..36b766cfc4d5
--- /dev/null
+++ b/include/asm-x86_64/pda.h
@@ -0,0 +1,83 @@
+#ifndef X86_64_PDA_H
+#define X86_64_PDA_H
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/cache.h>
+
+/* Per processor datastructure. %gs points to it while the kernel runs */ 
+struct x8664_pda {
+	struct task_struct *pcurrent;	/* Current process */
+	unsigned long data_offset;	/* Per cpu data offset from linker address */
+	struct x8664_pda *me;	    /* Pointer to itself */  
+	unsigned long kernelstack;  /* top of kernel stack for current */ 
+	unsigned long oldrsp; 	    /* user rsp for system call */
+	unsigned long irqrsp;	    /* Old rsp for interrupts. */ 
+        int irqcount;		    /* Irq nesting counter. Starts with -1 */  	
+	int cpunumber;		    /* Logical CPU number */
+	char *irqstackptr;	/* top of irqstack */
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;	/* number of NMI on this CPUs */
+	struct mm_struct *active_mm;
+	int mmu_state;     
+	unsigned apic_timer_irqs;
+} ____cacheline_aligned;
+
+
+#define IRQSTACK_ORDER 2
+#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER) 
+
+extern struct x8664_pda cpu_pda[];
+
+/* 
+ * There is no fast way to get the base address of the PDA, all the accesses
+ * have to mention %fs/%gs.  So it needs to be done this Torvaldian way.
+ */ 
+#define sizeof_field(type,field)  (sizeof(((type *)0)->field))
+#define typeof_field(type,field)  typeof(((type *)0)->field)
+
+extern void __bad_pda_field(void);
+
+#define pda_offset(field) offsetof(struct x8664_pda, field)
+
+#define pda_to_op(op,field,val) do { \
+       switch (sizeof_field(struct x8664_pda, field)) { 		\
+case 2: \
+asm volatile(op "w %0,%%gs:%P1"::"r" (val),"i"(pda_offset(field)):"memory"); break; \
+case 4: \
+asm volatile(op "l %0,%%gs:%P1"::"r" (val),"i"(pda_offset(field)):"memory"); break; \
+case 8: \
+asm volatile(op "q %0,%%gs:%P1"::"r" (val),"i"(pda_offset(field)):"memory"); break; \
+       default: __bad_pda_field(); 					\
+       } \
+       } while (0)
+
+/* 
+ * AK: PDA read accesses should be neither volatile nor have an memory clobber.
+ * Unfortunately removing them causes all hell to break lose currently.
+ */
+#define pda_from_op(op,field) ({ \
+       typedef typeof_field(struct x8664_pda, field) T__; T__ ret__; \
+       switch (sizeof_field(struct x8664_pda, field)) { 		\
+case 2: \
+asm volatile(op "w %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
+case 4: \
+asm volatile(op "l %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
+case 8: \
+asm volatile(op "q %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
+       default: __bad_pda_field(); 					\
+       } \
+       ret__; })
+
+
+#define read_pda(field) pda_from_op("mov",field)
+#define write_pda(field,val) pda_to_op("mov",field,val)
+#define add_pda(field,val) pda_to_op("add",field,val)
+#define sub_pda(field,val) pda_to_op("sub",field,val)
+
+#endif
+
+#define PDA_STACKOFFSET (5*8)
+
+#endif
diff --git a/include/asm-x86_64/percpu.h b/include/asm-x86_64/percpu.h
new file mode 100644
index 000000000000..415d73f3c8ef
--- /dev/null
+++ b/include/asm-x86_64/percpu.h
@@ -0,0 +1,52 @@
+#ifndef _ASM_X8664_PERCPU_H_
+#define _ASM_X8664_PERCPU_H_
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+   in the PDA. Longer term the PDA and every per cpu variable
+   should be just put into a single section and referenced directly
+   from %gs */
+
+#ifdef CONFIG_SMP
+
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda[cpu].data_offset)
+#define __my_cpu_offset() read_pda(data_offset)
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
+
+/* var is in discarded region: offset to particular copy we want */
+#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size)			\
+do {								\
+	unsigned int __i;					\
+	for (__i = 0; __i < NR_CPUS; __i++)			\
+		if (cpu_possible(__i))				\
+			memcpy((pcpudst)+__per_cpu_offset(__i),	\
+			       (src), (size));			\
+} while (0)
+
+extern void setup_per_cpu_areas(void);
+
+#else /* ! SMP */
+
+#define DEFINE_PER_CPU(type, name) \
+    __typeof__(type) per_cpu__##name
+
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var)			per_cpu__##var
+
+#endif	/* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+#endif /* _ASM_X8664_PERCPU_H_ */
diff --git a/include/asm-x86_64/pgalloc.h b/include/asm-x86_64/pgalloc.h
new file mode 100644
index 000000000000..deadd146978b
--- /dev/null
+++ b/include/asm-x86_64/pgalloc.h
@@ -0,0 +1,105 @@
+#ifndef _X86_64_PGALLOC_H
+#define _X86_64_PGALLOC_H
+
+#include <asm/fixmap.h>
+#include <asm/pda.h>
+#include <linux/threads.h>
+#include <linux/mm.h>
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		set_pmd(pmd, __pmd(_PAGE_TABLE | __pa(pte)))
+#define pud_populate(mm, pud, pmd) \
+		set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)))
+#define pgd_populate(mm, pgd, pud) \
+		set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)))
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+	set_pmd(pmd, __pmd(_PAGE_TABLE | (page_to_pfn(pte) << PAGE_SHIFT)));
+}
+
+extern __inline__ pmd_t *get_pmd(void)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL);
+}
+
+extern __inline__ void pmd_free(pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+static inline pmd_t *pmd_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free (pud_t *pud)
+{
+	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
+	free_page((unsigned long)pud);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	unsigned boundary;
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+	if (!pgd)
+		return NULL;
+	/*
+	 * Copy kernel pointers in from init.
+	 * Could keep a freelist or slab cache of those because the kernel
+	 * part never changes.
+	 */
+	boundary = pgd_index(__PAGE_OFFSET);
+	memset(pgd, 0, boundary * sizeof(pgd_t));
+	memcpy(pgd + boundary,
+	       init_level4_pgt + boundary,
+	       (PTRS_PER_PGD - boundary) * sizeof(pgd_t));
+	return pgd;
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+	BUG_ON((unsigned long)pgd & (PAGE_SIZE-1));
+	free_page((unsigned long)pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	return (pte_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	void *p = (void *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+	if (!p)
+		return NULL;
+	return virt_to_page(p);
+}
+
+/* Should really implement gc for free page table pages. This could be
+   done with a reference count in struct page. */
+
+extern __inline__ void pte_free_kernel(pte_t *pte)
+{
+	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+	free_page((unsigned long)pte); 
+}
+
+extern inline void pte_free(struct page *pte)
+{
+	__free_page(pte);
+} 
+
+#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+
+#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#define __pud_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+
+#endif /* _X86_64_PGALLOC_H */
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
new file mode 100644
index 000000000000..dc6b6f2604e8
--- /dev/null
+++ b/include/asm-x86_64/pgtable.h
@@ -0,0 +1,437 @@
+#ifndef _X86_64_PGTABLE_H
+#define _X86_64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the x86-64 page table tree.
+ */
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/bitops.h>
+#include <linux/threads.h>
+#include <asm/pda.h>
+
+extern pud_t level3_kernel_pgt[512];
+extern pud_t level3_physmem_pgt[512];
+extern pud_t level3_ident_pgt[512];
+extern pmd_t level2_kernel_pgt[512];
+extern pgd_t init_level4_pgt[];
+extern unsigned long __supported_pte_mask;
+
+#define swapper_pg_dir init_level4_pgt
+
+extern int nonx_setup(char *str);
+extern void paging_init(void);
+extern void clear_kernel_mapping(unsigned long addr, unsigned long size);
+
+extern unsigned long pgkern_mask;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	39
+#define PTRS_PER_PGD	512
+
+/*
+ * 3rd level page
+ */
+#define PUD_SHIFT	30
+#define PTRS_PER_PUD	512
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %p(%016lx).\n", __FILE__, __LINE__, &(e), pud_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
+
+#define pgd_none(x)	(!pgd_val(x))
+#define pud_none(x)	(!pud_val(x))
+
+static inline void set_pte(pte_t *dst, pte_t val)
+{
+	pte_val(*dst) = pte_val(val);
+} 
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static inline void set_pmd(pmd_t *dst, pmd_t val)
+{
+        pmd_val(*dst) = pmd_val(val); 
+} 
+
+static inline void set_pud(pud_t *dst, pud_t val)
+{
+	pud_val(*dst) = pud_val(val);
+}
+
+extern inline void pud_clear (pud_t *pud)
+{
+	set_pud(pud, __pud(0));
+}
+
+static inline void set_pgd(pgd_t *dst, pgd_t val)
+{
+	pgd_val(*dst) = pgd_val(val); 
+} 
+
+extern inline void pgd_clear (pgd_t * pgd)
+{
+	set_pgd(pgd, __pgd(0));
+}
+
+#define pud_page(pud) \
+((unsigned long) __va(pud_val(pud) & PHYSICAL_PAGE_MASK))
+
+#define ptep_get_and_clear(mm,addr,xp)	__pte(xchg(&(xp)->pte, 0))
+#define pte_same(a, b)		((a).pte == (b).pte)
+
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#ifndef __ASSEMBLY__
+#define MAXMEM		 0x3fffffffffffUL
+#define VMALLOC_START    0xffffc20000000000UL
+#define VMALLOC_END      0xffffe1ffffffffffUL
+#define MODULES_VADDR    0xffffffff88000000UL
+#define MODULES_END      0xfffffffffff00000UL
+#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
+
+#define _PAGE_BIT_PRESENT	0
+#define _PAGE_BIT_RW		1
+#define _PAGE_BIT_USER		2
+#define _PAGE_BIT_PWT		3
+#define _PAGE_BIT_PCD		4
+#define _PAGE_BIT_ACCESSED	5
+#define _PAGE_BIT_DIRTY		6
+#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
+#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
+#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
+
+#define _PAGE_PRESENT	0x001
+#define _PAGE_RW	0x002
+#define _PAGE_USER	0x004
+#define _PAGE_PWT	0x008
+#define _PAGE_PCD	0x010
+#define _PAGE_ACCESSED	0x020
+#define _PAGE_DIRTY	0x040
+#define _PAGE_PSE	0x080	/* 2MB page */
+#define _PAGE_FILE	0x040	/* set:pagecache, unset:swap */
+#define _PAGE_GLOBAL	0x100	/* Global TLB entry */
+
+#define _PAGE_PROTNONE	0x080	/* If not present */
+#define _PAGE_NX        (1UL<<_PAGE_BIT_NX)
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY PAGE_COPY_NOEXEC
+#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define __PAGE_KERNEL \
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC \
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define __PAGE_KERNEL_NOCACHE \
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_PCD | _PAGE_ACCESSED | _PAGE_NX)
+#define __PAGE_KERNEL_RO \
+	(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_NX)
+#define __PAGE_KERNEL_VSYSCALL \
+	(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define __PAGE_KERNEL_VSYSCALL_NOCACHE \
+	(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_PCD)
+#define __PAGE_KERNEL_LARGE \
+	(__PAGE_KERNEL | _PAGE_PSE)
+
+#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
+
+#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_VSYSCALL32 __pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL MAKE_GLOBAL(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_LARGE MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+/*         xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+static inline unsigned long pgd_bad(pgd_t pgd) 
+{ 
+       unsigned long val = pgd_val(pgd);
+       val &= ~PTE_MASK; 
+       val &= ~(_PAGE_USER | _PAGE_DIRTY); 
+       return val & ~(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED);      
+} 
+
+static inline unsigned long pud_bad(pud_t pud)
+{
+       unsigned long val = pud_val(pud);
+       val &= ~PTE_MASK;
+       val &= ~(_PAGE_USER | _PAGE_DIRTY);
+       return val & ~(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED);
+}
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))	/* FIXME: is this
+						   right? */
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)  ((pte_val(x) >> PAGE_SHIFT) & __PHYSICAL_MASK)
+
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = (page_nr << PAGE_SHIFT);
+	pte_val(pte) |= pgprot_val(pgprot);
+	pte_val(pte) &= __supported_pte_mask;
+	return pte;
+}
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)		{ return pte_val(pte) & _PAGE_USER; }
+extern inline int pte_read(pte_t pte)		{ return pte_val(pte) & _PAGE_USER; }
+extern inline int pte_exec(pte_t pte)		{ return pte_val(pte) & _PAGE_USER; }
+extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+extern inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+
+extern inline pte_t pte_rdprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
+extern inline pte_t pte_exprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; }
+extern inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+extern inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+extern inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); return pte; }
+extern inline pte_t pte_mkread(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
+extern inline pte_t pte_mkexec(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
+extern inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+extern inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+extern inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; }
+
+struct vm_area_struct;
+
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_DIRTY, ptep);
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	clear_bit(_PAGE_BIT_RW, ptep);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT))
+
+#define __LARGE_PTE (_PAGE_PSE|_PAGE_PRESENT) 
+static inline int pmd_large(pmd_t pte) { 
+	return (pmd_val(pte) & __LARGE_PTE) == __LARGE_PTE; 
+} 	
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+/*
+ * Level 4 access.
+ */
+#define pgd_page(pgd) ((unsigned long) __va((unsigned long)pgd_val(pgd) & PTE_MASK))
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+#define pgd_offset_k(address) (init_level4_pgt + pgd_index(address))
+#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
+#define mk_kernel_pgd(address) ((pgd_t){ (address) | _KERNPG_TABLE })
+
+/* PUD - Level3 access */
+/* to find an entry in a page-table-directory. */
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define pud_offset(pgd, address) ((pud_t *) pgd_page(*(pgd)) + pud_index(address))
+#define pud_offset_k(pgd, addr) pud_offset(pgd, addr)
+#define pud_present(pud) (pud_val(pud) & _PAGE_PRESENT)
+
+static inline pud_t *__pud_offset_k(pud_t *pud, unsigned long address)
+{ 
+	return pud + pud_index(address);
+} 
+
+/* PMD  - Level 2 access */
+#define pmd_page_kernel(pmd) ((unsigned long) __va(pmd_val(pmd) & PTE_MASK))
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pmd_offset(dir, address) ((pmd_t *) pud_page(*(dir)) + \
+			pmd_index(address))
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE )
+#define pfn_pmd(nr,prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pmd_pfn(x)  ((pmd_val(x) >> PAGE_SHIFT) & __PHYSICAL_MASK)
+
+#define pte_to_pgoff(pte) ((pte_val(pte) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << PAGE_SHIFT) | _PAGE_FILE })
+#define PTE_FILE_MAX_BITS __PHYSICAL_MASK_SHIFT
+
+/* PTE - Level 1 access. */
+
+/* page, protection -> pte */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) (pte_val(entry) |= _PAGE_PRESENT | _PAGE_PSE)
+ 
+/* physical address -> PTE */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{ 
+	pte_t pte;
+	pte_val(pte) = physpage | pgprot_val(pgprot); 
+	return pte; 
+}
+ 
+/* Change flags of a PTE */
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ 
+	pte_val(pte) &= _PAGE_CHG_MASK;
+	pte_val(pte) |= pgprot_val(newprot);
+	pte_val(pte) &= __supported_pte_mask;
+       return pte; 
+}
+
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_kernel(*(dir)) + \
+			pte_index(address))
+
+/* x86-64 always has all page tables mapped. */
+#define pte_offset_map(dir,address) pte_offset_kernel(dir,address)
+#define pte_offset_map_nested(dir,address) pte_offset_kernel(dir,address)
+#define pte_unmap(pte) /* NOP */
+#define pte_unmap_nested(pte) /* NOP */ 
+
+#define update_mmu_cache(vma,address,pte) do { } while (0)
+
+/* We only update the dirty/accessed state if we set
+ * the dirty bit by hand in the kernel, since the hardware
+ * will do the accessed bit for us, and we don't want to
+ * race with other CPU's that might be updating the dirty
+ * bit at the same time. */
+#define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+	do {								  \
+		if (__dirty) {						  \
+			set_pte(__ptep, __entry);			  \
+			flush_tlb_page(__vma, __address);		  \
+		}							  \
+	} while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x3f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+
+extern int kern_addr_valid(unsigned long addr); 
+
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#define pgtable_cache_init()   do { } while (0)
+#define check_pgt_cache()      do { } while (0)
+
+#define PAGE_AGP    PAGE_KERNEL_NOCACHE
+#define HAVE_PAGE_AGP 1
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
+#define	kc_offset_to_vaddr(o) \
+   (((o) & (1UL << (__VIRTUAL_MASK_SHIFT-1))) ? ((o) | (~__VIRTUAL_MASK)) : (o))
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* _X86_64_PGTABLE_H */
diff --git a/include/asm-x86_64/poll.h b/include/asm-x86_64/poll.h
new file mode 100644
index 000000000000..c43cbba31913
--- /dev/null
+++ b/include/asm-x86_64/poll.h
@@ -0,0 +1,26 @@
+#ifndef __x86_64_POLL_H
+#define __x86_64_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif
diff --git a/include/asm-x86_64/posix_types.h b/include/asm-x86_64/posix_types.h
new file mode 100644
index 000000000000..9926aa43775b
--- /dev/null
+++ b/include/asm-x86_64/posix_types.h
@@ -0,0 +1,119 @@
+#ifndef _ASM_X86_64_POSIX_TYPES_H
+#define _ASM_X86_64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned long	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned long	__kernel_old_dev_t;
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif
diff --git a/include/asm-x86_64/prctl.h b/include/asm-x86_64/prctl.h
new file mode 100644
index 000000000000..52952adef1ca
--- /dev/null
+++ b/include/asm-x86_64/prctl.h
@@ -0,0 +1,10 @@
+#ifndef X86_64_PRCTL_H
+#define X86_64_PRCTL_H 1
+
+#define ARCH_SET_GS 0x1001
+#define ARCH_SET_FS 0x1002
+#define ARCH_GET_FS 0x1003
+#define ARCH_GET_GS 0x1004
+
+
+#endif
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
new file mode 100644
index 000000000000..45ab74e8f141
--- /dev/null
+++ b/include/asm-x86_64/processor.h
@@ -0,0 +1,462 @@
+/*
+ * include/asm-x86_64/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+#ifndef __ASM_X86_64_PROCESSOR_H
+#define __ASM_X86_64_PROCESSOR_H
+
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/sigcontext.h>
+#include <asm/cpufeature.h>
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/msr.h>
+#include <asm/current.h>
+#include <asm/system.h>
+#include <asm/mmsegment.h>
+#include <asm/percpu.h>
+#include <linux/personality.h>
+
+#define TF_MASK		0x00000100
+#define IF_MASK		0x00000200
+#define IOPL_MASK	0x00003000
+#define NT_MASK		0x00004000
+#define VM_MASK		0x00020000
+#define AC_MASK		0x00040000
+#define VIF_MASK	0x00080000	/* virtual interrupt flag */
+#define VIP_MASK	0x00100000	/* virtual interrupt pending */
+#define ID_MASK		0x00200000
+
+#define desc_empty(desc) \
+               (!((desc)->a + (desc)->b))
+
+#define desc_equal(desc1, desc2) \
+               (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; asm volatile("leaq 1f(%%rip),%0\n1:":"=r"(pc)); pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+
+struct cpuinfo_x86 {
+	__u8	x86;		/* CPU family */
+	__u8	x86_vendor;	/* CPU vendor */
+	__u8	x86_model;
+	__u8	x86_mask;
+	int	cpuid_level;	/* Maximum supported CPUID level, -1=no CPUID */
+	__u32	x86_capability[NCAPINTS];
+	char	x86_vendor_id[16];
+	char	x86_model_id[64];
+	int 	x86_cache_size;  /* in KB */
+	int	x86_clflush_size;
+	int	x86_cache_alignment;
+	int	x86_tlbsize;	/* number of 4K pages in DTLB/ITLB combined(in pages)*/
+        __u8    x86_virt_bits, x86_phys_bits;
+	__u8	x86_num_cores;
+	__u8	x86_apicid;
+        __u32   x86_power; 	
+	__u32   x86_cpuid_level;	/* Max CPUID function supported */
+	unsigned long loops_per_jiffy;
+} ____cacheline_aligned;
+
+#define X86_VENDOR_INTEL 0
+#define X86_VENDOR_CYRIX 1
+#define X86_VENDOR_AMD 2
+#define X86_VENDOR_UMC 3
+#define X86_VENDOR_NEXGEN 4
+#define X86_VENDOR_CENTAUR 5
+#define X86_VENDOR_RISE 6
+#define X86_VENDOR_TRANSMETA 7
+#define X86_VENDOR_NUM 8
+#define X86_VENDOR_UNKNOWN 0xff
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_x86 cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+extern char ignore_irq13;
+
+extern void identify_cpu(struct cpuinfo_x86 *);
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME		0x0001	/* enable vm86 extensions */
+#define X86_CR4_PVI		0x0002	/* virtual interrupts flag enable */
+#define X86_CR4_TSD		0x0004	/* disable time stamp at ipl 3 */
+#define X86_CR4_DE		0x0008	/* enable debugging extensions */
+#define X86_CR4_PSE		0x0010	/* enable page size extensions */
+#define X86_CR4_PAE		0x0020	/* enable physical address extensions */
+#define X86_CR4_MCE		0x0040	/* Machine check enable */
+#define X86_CR4_PGE		0x0080	/* enable global pages */
+#define X86_CR4_PCE		0x0100	/* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR		0x0200	/* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT	0x0400	/* enable unmasked SSE exceptions */
+
+/*
+ * Save the cr4 feature set we're using (ie
+ * Pentium 4MB enable and PPro Global page
+ * enable), so that any CPU's that boot up
+ * after us can get the correct flags.
+ */
+extern unsigned long mmu_cr4_features;
+
+static inline void set_in_cr4 (unsigned long mask)
+{
+	mmu_cr4_features |= mask;
+	__asm__("movq %%cr4,%%rax\n\t"
+		"orq %0,%%rax\n\t"
+		"movq %%rax,%%cr4\n"
+		: : "irg" (mask)
+		:"ax");
+}
+
+static inline void clear_in_cr4 (unsigned long mask)
+{
+	mmu_cr4_features &= ~mask;
+	__asm__("movq %%cr4,%%rax\n\t"
+		"andq %0,%%rax\n\t"
+		"movq %%rax,%%cr4\n"
+		: : "irg" (~mask)
+		:"ax");
+}
+
+
+/*
+ * User space process size. 47bits.
+ */
+#define TASK_SIZE	(0x800000000000UL)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define IA32_PAGE_OFFSET ((current->personality & ADDR_LIMIT_3GB) ? 0xc0000000 : 0xFFFFe000)
+#define TASK_UNMAPPED_32 PAGE_ALIGN(IA32_PAGE_OFFSET/3)
+#define TASK_UNMAPPED_64 PAGE_ALIGN(TASK_SIZE/3) 
+#define TASK_UNMAPPED_BASE	\
+	(test_thread_flag(TIF_IA32) ? TASK_UNMAPPED_32 : TASK_UNMAPPED_64)  
+
+/*
+ * Size of io_bitmap.
+ */
+#define IO_BITMAP_BITS  65536
+#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
+#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_OFFSET offsetof(struct tss_struct,io_bitmap)
+#define INVALID_IO_BITMAP_OFFSET 0x8000
+
+struct i387_fxsave_struct {
+	u16	cwd;
+	u16	swd;
+	u16	twd;
+	u16	fop;
+	u64	rip;
+	u64	rdp; 
+	u32	mxcsr;
+	u32	mxcsr_mask;
+	u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 128 bytes */
+	u32	padding[24];
+} __attribute__ ((aligned (16)));
+
+union i387_union {
+	struct i387_fxsave_struct	fxsave;
+};
+
+struct tss_struct {
+	u32 reserved1;
+	u64 rsp0;	
+	u64 rsp1;
+	u64 rsp2;
+	u64 reserved2;
+	u64 ist[7];
+	u32 reserved3;
+	u32 reserved4;
+	u16 reserved5;
+	u16 io_bitmap_base;
+	/*
+	 * The extra 1 is there because the CPU will access an
+	 * additional byte beyond the end of the IO permission
+	 * bitmap. The extra byte must be all 1 bits, and must
+	 * be within the limit. Thus we have:
+	 *
+	 * 128 bytes, the bitmap itself, for ports 0..0x3ff
+	 * 8 bytes, for an extra "long" of ~0UL
+	 */
+	unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
+} __attribute__((packed)) ____cacheline_aligned;
+
+extern struct cpuinfo_x86 boot_cpu_data;
+DECLARE_PER_CPU(struct tss_struct,init_tss);
+
+#define ARCH_MIN_TASKALIGN	16
+
+struct thread_struct {
+	unsigned long	rsp0;
+	unsigned long	rsp;
+	unsigned long 	userrsp;	/* Copy from PDA */ 
+	unsigned long	fs;
+	unsigned long	gs;
+	unsigned short	es, ds, fsindex, gsindex;	
+/* Hardware debugging registers */
+	unsigned long	debugreg0;  
+	unsigned long	debugreg1;  
+	unsigned long	debugreg2;  
+	unsigned long	debugreg3;  
+	unsigned long	debugreg6;  
+	unsigned long	debugreg7;  
+/* fault info */
+	unsigned long	cr2, trap_no, error_code;
+/* floating point info */
+	union i387_union	i387  __attribute__((aligned(16)));
+/* IO permissions. the bitmap could be moved into the GDT, that would make
+   switch faster for a limited number of ioperm using tasks. -AK */
+	int		ioperm;
+	unsigned long	*io_bitmap_ptr;
+	unsigned io_bitmap_max;
+/* cached TLS descriptors. */
+	u64 tls_array[GDT_ENTRY_TLS_ENTRIES];
+} __attribute__((aligned(16)));
+
+#define INIT_THREAD  {}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2 
+#define NMI_STACK 3 
+#define DEBUG_STACK 4 
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+#define EXCEPTION_STACK_ORDER 0 
+
+#define start_thread(regs,new_rip,new_rsp) do { \
+	asm volatile("movl %0,%%fs; movl %0,%%es; movl %0,%%ds": :"r" (0));	 \
+	load_gs_index(0);							\
+	(regs)->rip = (new_rip);						 \
+	(regs)->rsp = (new_rsp);						 \
+	write_pda(oldrsp, (new_rsp));						 \
+	(regs)->cs = __USER_CS;							 \
+	(regs)->ss = __USER_DS;							 \
+	(regs)->eflags = 0x200;							 \
+	set_fs(USER_DS);							 \
+} while(0) 
+
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ * What is this good for? it will be always the scheduler or ret_from_fork.
+ */
+#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.rsp - 8))
+
+extern unsigned long get_wchan(struct task_struct *p);
+#define KSTK_EIP(tsk) \
+	(((struct pt_regs *)(tsk->thread.rsp0 - sizeof(struct pt_regs)))->rip)
+#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
+
+
+struct microcode_header {
+	unsigned int hdrver;
+	unsigned int rev;
+	unsigned int date;
+	unsigned int sig;
+	unsigned int cksum;
+	unsigned int ldrver;
+	unsigned int pf;
+	unsigned int datasize;
+	unsigned int totalsize;
+	unsigned int reserved[3];
+};
+
+struct microcode {
+	struct microcode_header hdr;
+	unsigned int bits[0];
+};
+
+typedef struct microcode microcode_t;
+typedef struct microcode_header microcode_header_t;
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int cksum;
+};
+
+struct extended_sigtable {
+	unsigned int count;
+	unsigned int cksum;
+	unsigned int reserved[3];
+	struct extended_signature sigs[0];
+};
+
+/* '6' because it used to be for P6 only (but now covers Pentium 4 as well) */
+#define MICROCODE_IOCFREE	_IO('6',0)
+
+
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
+
+/* Opteron nops */
+#define K8_NOP1 ".byte 0x90\n"
+#define K8_NOP2	".byte 0x66,0x90\n" 
+#define K8_NOP3	".byte 0x66,0x66,0x90\n" 
+#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n" 
+#define K8_NOP5	K8_NOP3 K8_NOP2 
+#define K8_NOP6	K8_NOP3 K8_NOP3
+#define K8_NOP7	K8_NOP4 K8_NOP3
+#define K8_NOP8	K8_NOP4 K8_NOP4
+
+#define ASM_NOP_MAX 8
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+extern inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+/* Stop speculative execution */
+extern inline void sync_core(void)
+{ 
+	int tmp;
+	asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
+} 
+
+#define cpu_has_fpu 1
+
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(void *x) 
+{ 
+	asm volatile("prefetcht0 %0" :: "m" (*(unsigned long *)x));
+} 
+
+#define ARCH_HAS_PREFETCHW 1
+static inline void prefetchw(void *x) 
+{ 
+	alternative_input(ASM_NOP5,
+			  "prefetchw (%1)",
+			  X86_FEATURE_3DNOW,
+			  "r" (x));
+} 
+
+#define ARCH_HAS_SPINLOCK_PREFETCH 1
+
+#define spin_lock_prefetch(x)  prefetchw(x)
+
+#define cpu_relax()   rep_nop()
+
+/*
+ *      NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_CCR0 0xc0
+#define CX86_CCR1 0xc1
+#define CX86_CCR2 0xc2
+#define CX86_CCR3 0xc3
+#define CX86_CCR4 0xe8
+#define CX86_CCR5 0xe9
+#define CX86_CCR6 0xea
+#define CX86_CCR7 0xeb
+#define CX86_DIR0 0xfe
+#define CX86_DIR1 0xff
+#define CX86_ARR_BASE 0xc4
+#define CX86_RCR_BASE 0xdc
+
+/*
+ *      NSC/Cyrix CPU indexed register access macros
+ */
+
+#define getCx86(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86(reg, data) do { \
+	outb((reg), 0x22); \
+	outb((data), 0x23); \
+} while (0)
+
+static inline void __monitor(const void *eax, unsigned long ecx,
+		unsigned long edx)
+{
+	/* "monitor %eax,%ecx,%edx;" */
+	asm volatile(
+		".byte 0x0f,0x01,0xc8;"
+		: :"a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+	/* "mwait %eax,%ecx;" */
+	asm volatile(
+		".byte 0x0f,0x01,0xc9;"
+		: :"a" (eax), "c" (ecx));
+}
+
+#define stack_current() \
+({								\
+	struct thread_info *ti;					\
+	asm("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK));	\
+	ti->task;					\
+})
+
+#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
+
+extern unsigned long boot_option_idle_override;
+/* Boot loader type from the setup header */
+extern int bootloader_type;
+
+#endif /* __ASM_X86_64_PROCESSOR_H */
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
new file mode 100644
index 000000000000..c59526ee54da
--- /dev/null
+++ b/include/asm-x86_64/proto.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_X8664_PROTO_H
+#define _ASM_X8664_PROTO_H 1
+
+#include <asm/ldt.h>
+
+/* misc architecture specific prototypes */
+
+struct cpuinfo_x86; 
+struct pt_regs;
+
+extern void get_cpu_vendor(struct cpuinfo_x86*);
+extern void start_kernel(void);
+extern void pda_init(int); 
+
+extern void early_idt_handler(void);
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+extern void init_memory_mapping(unsigned long start, unsigned long end);
+
+extern void system_call(void); 
+extern int kernel_syscall(void);
+extern void syscall_init(void);
+
+extern void ia32_syscall(void);
+extern void ia32_cstar_target(void); 
+extern void ia32_sysenter_target(void); 
+
+extern void config_acpi_tables(void);
+extern void ia32_syscall(void);
+extern void iommu_hole_init(void);
+
+extern void time_init_smp(void);
+
+extern void do_softirq_thunk(void);
+
+extern int numa_setup(char *opt);
+
+extern int setup_early_printk(char *); 
+extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
+
+extern void early_identify_cpu(struct cpuinfo_x86 *c);
+
+extern int k8_scan_nodes(unsigned long start, unsigned long end);
+
+extern void numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern unsigned long numa_free_all_bootmem(void);
+
+extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
+extern void free_bootmem_generic(unsigned long phys, unsigned len);
+
+extern void load_gs_index(unsigned gs);
+
+extern unsigned long end_pfn_map; 
+
+extern cpumask_t cpu_initialized;
+
+extern void show_trace(unsigned long * rsp);
+extern void show_registers(struct pt_regs *regs);
+
+extern void exception_table_check(void);
+
+extern void acpi_reserve_bootmem(void);
+
+extern void swap_low_mappings(void);
+
+extern void oops_begin(void);
+extern void die(const char *,struct pt_regs *,long);
+extern void __die(const char * str, struct pt_regs * regs, long err);
+extern void __show_regs(struct pt_regs * regs);
+extern void show_regs(struct pt_regs * regs);
+
+extern int map_syscall32(struct mm_struct *mm, unsigned long address);
+extern int __map_syscall32(struct mm_struct *mm, unsigned long address);
+extern char *syscall32_page;
+extern void syscall32_cpu_init(void);
+
+extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
+
+extern void check_ioapic(void);
+extern void check_efer(void);
+
+extern int unhandled_signal(struct task_struct *tsk, int sig);
+
+extern void select_idle_routine(const struct cpuinfo_x86 *c);
+extern void swiotlb_init(void);
+
+extern unsigned long max_mapnr;
+extern unsigned long end_pfn; 
+extern unsigned long table_start, table_end;
+
+extern int exception_trace;
+extern int force_iommu, no_iommu;
+extern int using_apic_timer;
+extern int disable_apic;
+extern unsigned cpu_khz;
+extern int ioapic_force;
+extern int skip_ioapic_setup;
+extern int acpi_ht;
+extern int acpi_disabled;
+
+extern int fallback_aper_order;
+extern int fallback_aper_force;
+extern int iommu_aperture;
+extern int iommu_aperture_disabled;
+extern int iommu_aperture_allowed;
+extern int fix_aperture;
+extern int force_iommu;
+
+extern int reboot_force;
+
+extern void smp_local_timer_interrupt(struct pt_regs * regs);
+
+long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
+
+#define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
+#define round_down(x,y) ((x) & ~((y)-1))
+
+#endif
diff --git a/include/asm-x86_64/ptrace.h b/include/asm-x86_64/ptrace.h
new file mode 100644
index 000000000000..c7865cfedc1f
--- /dev/null
+++ b/include/asm-x86_64/ptrace.h
@@ -0,0 +1,114 @@
+#ifndef _X86_64_PTRACE_H
+#define _X86_64_PTRACE_H
+
+#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS) 
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11 48
+#define R10 56	
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+#define ORIG_RAX 120       /* = ERROR */ 
+/* end of arguments */ 	
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#define ARGOFFSET R11
+#endif /* __ASSEMBLY__ */
+
+/* top of stack page */ 
+#define FRAME_SIZE 168
+
+#define PTRACE_OLDSETOPTIONS         21
+
+#ifndef __ASSEMBLY__ 
+
+struct pt_regs {
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long rbp;
+	unsigned long rbx;
+/* arguments: non interrupts/non tracing syscalls only save upto here*/
+ 	unsigned long r11;
+	unsigned long r10;	
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rdx;
+	unsigned long rsi;
+	unsigned long rdi;
+	unsigned long orig_rax;
+/* end of arguments */ 	
+/* cpu exception frame or undefined */
+	unsigned long rip;
+	unsigned long cs;
+	unsigned long eflags; 
+	unsigned long rsp; 
+	unsigned long ss;
+/* top of stack page */ 
+};
+
+#endif
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETFPXREGS         18
+#define PTRACE_SETFPXREGS         19
+
+/* only useful for access 32bit programs */
+#define PTRACE_GET_THREAD_AREA    25
+#define PTRACE_SET_THREAD_AREA    26
+
+#define PTRACE_ARCH_PRCTL	  30	/* arch_prctl for child */
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__) 
+#define user_mode(regs) (!!((regs)->cs & 3))
+#define instruction_pointer(regs) ((regs)->rip)
+extern unsigned long profile_pc(struct pt_regs *regs);
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
+
+enum {
+        EF_CF   = 0x00000001,
+        EF_PF   = 0x00000004,
+        EF_AF   = 0x00000010,
+        EF_ZF   = 0x00000040,
+        EF_SF   = 0x00000080,
+        EF_TF   = 0x00000100,
+        EF_IE   = 0x00000200,
+        EF_DF   = 0x00000400,
+        EF_OF   = 0x00000800,
+        EF_IOPL = 0x00003000,
+        EF_IOPL_RING0 = 0x00000000,
+        EF_IOPL_RING1 = 0x00001000,
+        EF_IOPL_RING2 = 0x00002000,
+        EF_NT   = 0x00004000,   /* nested task */
+        EF_RF   = 0x00010000,   /* resume */
+        EF_VM   = 0x00020000,   /* virtual mode */
+        EF_AC   = 0x00040000,   /* alignment */
+        EF_VIF  = 0x00080000,   /* virtual interrupt */
+        EF_VIP  = 0x00100000,   /* virtual interrupt pending */
+        EF_ID   = 0x00200000,   /* id */
+};
+
+#endif
+
+#endif
diff --git a/include/asm-x86_64/resource.h b/include/asm-x86_64/resource.h
new file mode 100644
index 000000000000..f40b40623234
--- /dev/null
+++ b/include/asm-x86_64/resource.h
@@ -0,0 +1,6 @@
+#ifndef _X8664_RESOURCE_H
+#define _X8664_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-x86_64/rtc.h b/include/asm-x86_64/rtc.h
new file mode 100644
index 000000000000..18ed713ac7de
--- /dev/null
+++ b/include/asm-x86_64/rtc.h
@@ -0,0 +1,10 @@
+#ifndef _X86_64_RTC_H
+#define _X86_64_RTC_H
+
+/*
+ * x86 uses the default access methods for the RTC.
+ */
+
+#include <asm-generic/rtc.h>
+
+#endif
diff --git a/include/asm-x86_64/rwlock.h b/include/asm-x86_64/rwlock.h
new file mode 100644
index 000000000000..8a78a4ace53c
--- /dev/null
+++ b/include/asm-x86_64/rwlock.h
@@ -0,0 +1,86 @@
+/* include/asm-x86_64/rwlock.h
+ *
+ *	Helpers used by both rw spinlocks and rw semaphores.
+ *
+ *	Based in part on code from semaphore.h and
+ *	spinlock.h Copyright 1996 Linus Torvalds.
+ *
+ *	Copyright 1999 Red Hat, Inc.
+ *	Copyright 2001,2002 SuSE labs 
+ *
+ *	Written by Benjamin LaHaise.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_X86_64_RWLOCK_H
+#define _ASM_X86_64_RWLOCK_H
+
+#include <linux/stringify.h>
+
+#define RW_LOCK_BIAS		 0x01000000
+#define RW_LOCK_BIAS_STR	"0x01000000"
+
+#define __build_read_lock_ptr(rw, helper)   \
+	asm volatile(LOCK "subl $1,(%0)\n\t" \
+		     "js 2f\n" \
+		     "1:\n" \
+		    LOCK_SECTION_START("") \
+		     "2:\tcall " helper "\n\t" \
+		     "jmp 1b\n" \
+		    LOCK_SECTION_END \
+		     ::"a" (rw) : "memory")
+
+#define __build_read_lock_const(rw, helper)   \
+	asm volatile(LOCK "subl $1,%0\n\t" \
+		     "js 2f\n" \
+		     "1:\n" \
+		    LOCK_SECTION_START("") \
+		     "2:\tpushq %%rax\n\t" \
+		     "leaq %0,%%rax\n\t" \
+		     "call " helper "\n\t" \
+		     "popq %%rax\n\t" \
+		     "jmp 1b\n" \
+		    LOCK_SECTION_END \
+		     :"=m" (*((volatile int *)rw))::"memory")
+
+#define __build_read_lock(rw, helper)	do { \
+						if (__builtin_constant_p(rw)) \
+							__build_read_lock_const(rw, helper); \
+						else \
+							__build_read_lock_ptr(rw, helper); \
+					} while (0)
+
+#define __build_write_lock_ptr(rw, helper) \
+	asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+		     "jnz 2f\n" \
+		     "1:\n" \
+		     LOCK_SECTION_START("") \
+		     "2:\tcall " helper "\n\t" \
+		     "jmp 1b\n" \
+		     LOCK_SECTION_END \
+		     ::"a" (rw) : "memory")
+
+#define __build_write_lock_const(rw, helper) \
+	asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+		     "jnz 2f\n" \
+		     "1:\n" \
+		    LOCK_SECTION_START("") \
+		     "2:\tpushq %%rax\n\t" \
+		     "leaq %0,%%rax\n\t" \
+		     "call " helper "\n\t" \
+		     "popq %%rax\n\t" \
+		     "jmp 1b\n" \
+		    LOCK_SECTION_END \
+		     :"=m" (*((volatile long *)rw))::"memory")
+
+#define __build_write_lock(rw, helper)	do { \
+						if (__builtin_constant_p(rw)) \
+							__build_write_lock_const(rw, helper); \
+						else \
+							__build_write_lock_ptr(rw, helper); \
+					} while (0)
+
+#endif
diff --git a/include/asm-x86_64/rwsem.h b/include/asm-x86_64/rwsem.h
new file mode 100644
index 000000000000..c002175b6e82
--- /dev/null
+++ b/include/asm-x86_64/rwsem.h
@@ -0,0 +1,278 @@
+/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for x86_64+
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ * Ported by Andi Kleen <ak@suse.de> to x86-64.
+ *
+ * Derived from asm-i386/semaphore.h and asm-i386/rwsem.h
+ *
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consecutive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _X8664_RWSEM_H
+#define _X8664_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+	__RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+		"# beginning down_read\n\t"
+LOCK_PREFIX	"  incl      (%%rdi)\n\t" /* adds 0x00000001, returns the old value */
+		"  js        2f\n\t" /* jump if we weren't granted the lock */
+		"1:\n\t"
+		LOCK_SECTION_START("") \
+		"2:\n\t"
+		"  call      rwsem_down_read_failed_thunk\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END \
+		"# ending down_read\n\t"
+		: "+m"(sem->count)
+		: "D"(sem)
+		: "memory", "cc");
+}
+
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	__s32 result, tmp;
+	__asm__ __volatile__(
+		"# beginning __down_read_trylock\n\t"
+		"  movl      %0,%1\n\t"
+		"1:\n\t"
+		"  movl	     %1,%2\n\t"
+		"  addl      %3,%2\n\t"
+		"  jle	     2f\n\t"
+LOCK_PREFIX	"  cmpxchgl  %2,%0\n\t"
+		"  jnz	     1b\n\t"
+		"2:\n\t"
+		"# ending __down_read_trylock\n\t"
+		: "+m"(sem->count), "=&a"(result), "=&r"(tmp)
+		: "i"(RWSEM_ACTIVE_READ_BIAS)
+		: "memory", "cc");
+	return result>=0 ? 1 : 0;
+}
+
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	__asm__ __volatile__(
+		"# beginning down_write\n\t"
+LOCK_PREFIX	"  xaddl      %0,(%%rdi)\n\t" /* subtract 0x0000ffff, returns the old value */
+		"  testl     %0,%0\n\t" /* was the count 0 before? */
+		"  jnz       2f\n\t" /* jump if we weren't granted the lock */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  call      rwsem_down_write_failed_thunk\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending down_write"
+		: "=&r" (tmp) 
+		: "0"(tmp), "D"(sem)
+		: "memory", "cc");
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long ret = cmpxchg(&sem->count,
+				  RWSEM_UNLOCKED_VALUE, 
+				  RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+	__asm__ __volatile__(
+		"# beginning __up_read\n\t"
+LOCK_PREFIX	"  xaddl      %[tmp],(%%rdi)\n\t" /* subtracts 1, returns the old value */
+		"  js        2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  decw      %w[tmp]\n\t" /* do nothing if still outstanding active readers */
+		"  jnz       1b\n\t"
+		"  call      rwsem_wake_thunk\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __up_read\n"
+		: "+m"(sem->count), [tmp] "+r" (tmp)
+		: "D"(sem)
+		: "memory", "cc");
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	unsigned tmp; 
+	__asm__ __volatile__(
+		"# beginning __up_write\n\t"
+		"  movl     %[bias],%[tmp]\n\t"
+LOCK_PREFIX	"  xaddl     %[tmp],(%%rdi)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */
+		"  jnz       2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  decw      %w[tmp]\n\t" /* did the active count reduce to 0? */
+		"  jnz       1b\n\t" /* jump back if not */
+		"  call      rwsem_wake_thunk\n\t"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __up_write\n"
+		: "+m"(sem->count), [tmp] "=r" (tmp)
+		: "D"(sem), [bias] "i"(-RWSEM_ACTIVE_WRITE_BIAS)
+		: "memory", "cc");
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+		"# beginning __downgrade_write\n\t"
+LOCK_PREFIX	"  addl      %[bias],(%%rdi)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+		"  js        2f\n\t" /* jump if the lock is being waited upon */
+		"1:\n\t"
+		LOCK_SECTION_START("")
+		"2:\n\t"
+		"  call	     rwsem_downgrade_thunk\n"
+		"  jmp       1b\n"
+		LOCK_SECTION_END
+		"# ending __downgrade_write\n"
+		: "=m"(sem->count)
+		: "D"(sem), [bias] "i"(-RWSEM_WAITING_BIAS), "m"(sem->count)
+		: "memory", "cc");
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	__asm__ __volatile__(
+LOCK_PREFIX	"addl %1,%0"
+		:"=m"(sem->count)
+		:"ir"(delta), "m"(sem->count));
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	int tmp = delta;
+
+	__asm__ __volatile__(
+LOCK_PREFIX	"xaddl %0,(%2)"
+		: "=r"(tmp), "=m"(sem->count)
+		: "r"(sem), "m"(sem->count), "0" (tmp)
+		: "memory");
+
+	return tmp+delta;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _X8664_RWSEM_H */
diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86_64/scatterlist.h
new file mode 100644
index 000000000000..49d89f8129cd
--- /dev/null
+++ b/include/asm-x86_64/scatterlist.h
@@ -0,0 +1,22 @@
+#ifndef _X8664_SCATTERLIST_H
+#define _X8664_SCATTERLIST_H
+
+struct scatterlist {
+    struct page		*page;
+    unsigned int	offset;
+    unsigned int	length;
+    dma_addr_t		dma_address;
+    unsigned int        dma_length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)     ((sg)->dma_address)
+#define sg_dma_len(sg)         ((sg)->dma_length)
+
+#endif 
diff --git a/include/asm-x86_64/seccomp.h b/include/asm-x86_64/seccomp.h
new file mode 100644
index 000000000000..553af65a2287
--- /dev/null
+++ b/include/asm-x86_64/seccomp.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on x86_64"
+#else
+#define TIF_32BIT TIF_IA32
+#endif
+
+#include <linux/unistd.h>
+#include <asm/ia32_unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_ia32_read
+#define __NR_seccomp_write_32 __NR_ia32_write
+#define __NR_seccomp_exit_32 __NR_ia32_exit
+#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/include/asm-x86_64/sections.h b/include/asm-x86_64/sections.h
new file mode 100644
index 000000000000..c746d9f1e70c
--- /dev/null
+++ b/include/asm-x86_64/sections.h
@@ -0,0 +1,7 @@
+#ifndef _X8664_SECTIONS_H
+#define _X8664_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-x86_64/segment.h b/include/asm-x86_64/segment.h
new file mode 100644
index 000000000000..44adaf18c11e
--- /dev/null
+++ b/include/asm-x86_64/segment.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+#include <asm/cache.h>
+
+#define __KERNEL_CS	0x10
+#define __KERNEL_DS	0x18
+
+#define __KERNEL32_CS   0x38
+
+/* 
+ * we cannot use the same code segment descriptor for user and kernel
+ * -- not even in the long flat mode, because of different DPL /kkeil 
+ * The segment offset needs to contain a RPL. Grr. -AK
+ * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets) 
+ */
+
+#define __USER32_CS   0x23   /* 4*8+3 */ 
+#define __USER_DS     0x2b   /* 5*8+3 */ 
+#define __USER_CS     0x33   /* 6*8+3 */ 
+#define __USER32_DS	__USER_DS 
+#define __KERNEL16_CS	(GDT_ENTRY_KERNELCS16 * 8)
+#define __KERNEL_COMPAT32_CS   0x8
+
+#define GDT_ENTRY_TLS 1
+#define GDT_ENTRY_TSS 8	/* needs two entries */
+#define GDT_ENTRY_LDT 10 /* needs two entries */
+#define GDT_ENTRY_TLS_MIN 12
+#define GDT_ENTRY_TLS_MAX 14
+#define GDT_ENTRY_KERNELCS16 15
+
+#define GDT_ENTRY_TLS_ENTRIES 3
+
+/* TLS indexes for 64bit - hardcoded in arch_prctl */
+#define FS_TLS 0	
+#define GS_TLS 1	
+
+#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
+#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)
+
+#define IDT_ENTRIES 256
+#define GDT_ENTRIES 16
+#define GDT_SIZE (GDT_ENTRIES * 8)
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8) 
+
+#endif
diff --git a/include/asm-x86_64/semaphore.h b/include/asm-x86_64/semaphore.h
new file mode 100644
index 000000000000..f325e39bf3b9
--- /dev/null
+++ b/include/asm-x86_64/semaphore.h
@@ -0,0 +1,196 @@
+#ifndef _X86_64_SEMAPHORE_H
+#define _X86_64_SEMAPHORE_H
+
+#include <linux/linkage.h>
+
+#ifdef __KERNEL__
+
+/*
+ * SMP- and interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * Modified 1996-12-23 by Dave Grothe <dave@gcom.com> to fix bugs in
+ *                     the original code and to make semaphore waits
+ *                     interruptible so that processes waiting on
+ *                     semaphores can be killed.
+ * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper
+ *		       functions in asm/sempahore-helper.h while fixing a
+ *		       potential and subtle race discovered by Ulrich Schmid
+ *		       in down_interruptible(). Since I started to play here I
+ *		       also implemented the `trylock' semaphore operation.
+ *          1999-07-02 Artur Skawina <skawina@geocities.com>
+ *                     Optimized "0(ecx)" -> "(ecx)" (the assembler does not
+ *                     do this). Changed calling sequences from push/jmp to
+ *                     traditional call/ret.
+ * Modified 2001-01-01 Andreas Franck <afranck@gmx.de>
+ *		       Some hacks to ensure compatibility with recent
+ *		       GCC snapshots, to avoid stack corruption when compiling
+ *		       with -fomit-frame-pointer. It's not sure if this will
+ *		       be fixed in GCC, as our previous implementation was a
+ *		       bit dubious.
+ *
+ * If you would like to see an analysis of this implementation, please
+ * ftp to gcom.com and download the file
+ * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz.
+ *
+ */
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+#include <linux/stringify.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name) \
+	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+/*
+ *	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+ *
+ * i'd rather use the more flexible initialization above, but sadly
+ * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
+ */
+	atomic_set(&sem->count, val);
+	sem->sleepers = 0;
+	init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int  __down_failed_interruptible(void  /* params in registers */);
+asmlinkage int  __down_failed_trylock(void  /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int  __down_interruptible(struct semaphore * sem);
+asmlinkage int  __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down_failed" is a special asm handler that calls the C
+ * routine that actually waits. See arch/x86_64/kernel/semaphore.c
+ */
+static inline void down(struct semaphore * sem)
+{
+	might_sleep();
+
+	__asm__ __volatile__(
+		"# atomic down operation\n\t"
+		LOCK "decl %0\n\t"     /* --sem->count */
+		"js 2f\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tcall __down_failed\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=m" (sem->count)
+		:"D" (sem)
+		:"memory");
+}
+
+/*
+ * Interruptible try to acquire a semaphore.  If we obtained
+ * it, return zero.  If we were interrupted, returns -EINTR
+ */
+static inline int down_interruptible(struct semaphore * sem)
+{
+	int result;
+
+	might_sleep();
+
+	__asm__ __volatile__(
+		"# atomic interruptible down operation\n\t"
+		LOCK "decl %1\n\t"     /* --sem->count */
+		"js 2f\n\t"
+		"xorl %0,%0\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tcall __down_failed_interruptible\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=a" (result), "=m" (sem->count)
+		:"D" (sem)
+		:"memory");
+	return result;
+}
+
+/*
+ * Non-blockingly attempt to down() a semaphore.
+ * Returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore * sem)
+{
+	int result;
+
+	__asm__ __volatile__(
+		"# atomic interruptible down operation\n\t"
+		LOCK "decl %1\n\t"     /* --sem->count */
+		"js 2f\n\t"
+		"xorl %0,%0\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tcall __down_failed_trylock\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=a" (result), "=m" (sem->count)
+		:"D" (sem)
+		:"memory","cc");
+	return result;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+	__asm__ __volatile__(
+		"# atomic up operation\n\t"
+		LOCK "incl %0\n\t"     /* ++sem->count */
+		"jle 2f\n"
+		"1:\n"
+		LOCK_SECTION_START("")
+		"2:\tcall __up_wakeup\n\t"
+		"jmp 1b\n"
+		LOCK_SECTION_END
+		:"=m" (sem->count)
+		:"D" (sem)
+		:"memory");
+}
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-x86_64/sembuf.h b/include/asm-x86_64/sembuf.h
new file mode 100644
index 000000000000..63b52925ae2a
--- /dev/null
+++ b/include/asm-x86_64/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _X86_64_SEMBUF_H
+#define _X86_64_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for x86_64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _X86_64_SEMBUF_H */
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
new file mode 100644
index 000000000000..dbab232044cd
--- /dev/null
+++ b/include/asm-x86_64/serial.h
@@ -0,0 +1,130 @@
+/*
+ * include/asm-x86_64/serial.h
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#endif
+
+#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
+
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#define STD_SERIAL_PORT_DEFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS			\
+	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
+	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
+	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
+	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
+	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
+	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
+	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
+	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
+	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
+	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
+	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
+	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
+	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
+	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
+	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
+	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
+	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
+	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
+	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
+	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
+	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
+	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
+	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
+	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
+	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
+	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
+	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS		\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
+	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#ifdef CONFIG_MCA
+#define MCA_SERIAL_PORT_DFNS			\
+	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
+	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
+#else
+#define MCA_SERIAL_PORT_DFNS
+#endif
+
+#define SERIAL_PORT_DFNS		\
+	STD_SERIAL_PORT_DEFNS		\
+	EXTRA_SERIAL_PORT_DEFNS		\
+	HUB6_SERIAL_PORT_DFNS		\
+	MCA_SERIAL_PORT_DFNS
+
diff --git a/include/asm-x86_64/setup.h b/include/asm-x86_64/setup.h
new file mode 100644
index 000000000000..985d4e3c79da
--- /dev/null
+++ b/include/asm-x86_64/setup.h
@@ -0,0 +1,6 @@
+#ifndef _x8664_SETUP_H
+#define _x8664_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif
diff --git a/include/asm-x86_64/shmbuf.h b/include/asm-x86_64/shmbuf.h
new file mode 100644
index 000000000000..5a6d6dda7c48
--- /dev/null
+++ b/include/asm-x86_64/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _X8664_SHMBUF_H
+#define _X8664_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for x8664 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif
diff --git a/include/asm-x86_64/shmparam.h b/include/asm-x86_64/shmparam.h
new file mode 100644
index 000000000000..d7021620dcb7
--- /dev/null
+++ b/include/asm-x86_64/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASMX8664_SHMPARAM_H
+#define _ASMX8664_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASMX8664_SHMPARAM_H */
diff --git a/include/asm-x86_64/sigcontext.h b/include/asm-x86_64/sigcontext.h
new file mode 100644
index 000000000000..b4e40236666c
--- /dev/null
+++ b/include/asm-x86_64/sigcontext.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_X86_64_SIGCONTEXT_H
+#define _ASM_X86_64_SIGCONTEXT_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+/* FXSAVE frame */
+/* Note: reserved1/2 may someday contain valuable data. Always save/restore
+   them when you change signal frames. */
+struct _fpstate {
+	__u16	cwd;
+	__u16	swd;
+	__u16	twd;	/* Note this is not the same as the 32bit/x87/FSAVE twd */
+	__u16	fop;
+	__u64	rip;
+	__u64	rdp; 
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg  */
+	__u32	reserved2[24];
+};
+
+struct sigcontext { 
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long rdi;
+	unsigned long rsi;
+	unsigned long rbp;
+	unsigned long rbx;
+	unsigned long rdx;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rsp;
+	unsigned long rip;
+	unsigned long eflags;		/* RFLAGS */
+	unsigned short cs;
+	unsigned short gs;
+	unsigned short fs;
+	unsigned short __pad0; 
+	unsigned long err;
+	unsigned long trapno;
+	unsigned long oldmask;
+	unsigned long cr2;
+	struct _fpstate __user *fpstate;	/* zero when no FPU context */
+	unsigned long reserved1[8];
+};
+
+#endif
diff --git a/include/asm-x86_64/sigcontext32.h b/include/asm-x86_64/sigcontext32.h
new file mode 100644
index 000000000000..3d657038ab7c
--- /dev/null
+++ b/include/asm-x86_64/sigcontext32.h
@@ -0,0 +1,71 @@
+#ifndef _SIGCONTEXT32_H
+#define _SIGCONTEXT32_H 1
+
+/* signal context for 32bit programs. */
+
+#define X86_FXSR_MAGIC		0x0000
+
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	__u32	element[4];
+};
+
+/* FSAVE frame with extensions */
+struct _fpstate_ia32 {
+	/* Regular FPU environment */
+	__u32 	cw;
+	__u32	sw;
+	__u32	tag;	/* not compatible to 64bit twd */
+	__u32	ipoff;			
+	__u32	cssel;
+	__u32	dataoff;
+	__u32	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	__u32	_fxsr_env[6];
+	__u32	mxcsr;
+	__u32	reserved;
+	struct _fpxreg	_fxsr_st[8];
+	struct _xmmreg	_xmm[8];	/* It's actually 16 */ 
+	__u32	padding[56];
+};
+
+struct sigcontext_ia32 {
+       unsigned short gs, __gsh;
+       unsigned short fs, __fsh;
+       unsigned short es, __esh;
+       unsigned short ds, __dsh;
+       unsigned int edi;
+       unsigned int esi;
+       unsigned int ebp;
+       unsigned int esp;
+       unsigned int ebx;
+       unsigned int edx;
+       unsigned int ecx;
+       unsigned int eax;
+       unsigned int trapno;
+       unsigned int err;
+       unsigned int eip;
+       unsigned short cs, __csh;
+       unsigned int eflags;
+       unsigned int esp_at_signal;
+       unsigned short ss, __ssh;
+       unsigned int fpstate;		/* really (struct _fpstate_ia32 *) */
+       unsigned int oldmask;
+       unsigned int cr2;
+};
+
+#endif
diff --git a/include/asm-x86_64/siginfo.h b/include/asm-x86_64/siginfo.h
new file mode 100644
index 000000000000..7bc15985f124
--- /dev/null
+++ b/include/asm-x86_64/siginfo.h
@@ -0,0 +1,10 @@
+#ifndef _X8664_SIGINFO_H
+#define _X8664_SIGINFO_H
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+
+#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-x86_64/signal.h b/include/asm-x86_64/signal.h
new file mode 100644
index 000000000000..643a20d73765
--- /dev/null
+++ b/include/asm-x86_64/signal.h
@@ -0,0 +1,213 @@
+#ifndef _ASMx8664_SIGNAL_H
+#define _ASMx8664_SIGNAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/time.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+
+struct pt_regs; 
+asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+#endif
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+#ifndef __ASSEMBLY__
+/* Type of a signal handler.  */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#undef __HAVE_ARCH_SIG_BITOPS
+#if 0
+
+extern __inline__ void sigaddset(sigset_t *set, int _sig)
+{
+	__asm__("btsq %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+extern __inline__ void sigdelset(sigset_t *set, int _sig)
+{
+	__asm__("btrq %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+extern __inline__ int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig & ~(_NSIG_BPW-1)));
+}
+
+extern __inline__ int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	__asm__("btq %2,%1\n\tsbbq %0,%0"
+		: "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+	return ret;
+}
+
+#define sigismember(set,sig)			\
+	(__builtin_constant_p(sig) ?		\
+	 __const_sigismember((set),(sig)) :	\
+	 __gen_sigismember((set),(sig)))
+
+extern __inline__ int sigfindinword(unsigned long word)
+{
+	__asm__("bsfq %1,%0" : "=r"(word) : "rm"(word) : "cc");
+	return word;
+}
+#endif
+#endif
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h
new file mode 100644
index 000000000000..fe523e3e2ff4
--- /dev/null
+++ b/include/asm-x86_64/smp.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+/*
+ * We need the APIC definitions automatically as part of 'smp.h'
+ */
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+extern int disable_apic;
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#ifndef __ASSEMBLY__
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#ifdef CONFIG_X86_IO_APIC
+#include <asm/io_apic.h>
+#endif
+#include <asm/apic.h>
+#include <asm/thread_info.h>
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+#ifndef ASSEMBLY
+
+#include <asm/pda.h>
+
+struct pt_regs;
+
+/*
+ * Private routines/data
+ */
+ 
+extern void smp_alloc_memory(void);
+extern cpumask_t cpu_online_map;
+extern volatile unsigned long smp_invalidate_needed;
+extern int pic_mode;
+extern int smp_num_siblings;
+extern void smp_flush_tlb(void);
+extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
+extern void smp_send_reschedule(int cpu);
+extern void smp_invalidate_rcv(void);		/* Process an NMI */
+extern void (*mtrr_hook) (void);
+extern void zap_low_mappings(void);
+void smp_stop_cpu(void);
+extern cpumask_t cpu_sibling_map[NR_CPUS];
+extern u8 phys_proc_id[NR_CPUS];
+
+#define SMP_TRAMPOLINE_BASE 0x6000
+
+/*
+ * On x86 all CPUs are mapped 1:1 to the APIC space.
+ * This simplifies scheduling and IPI sending and
+ * compresses data structures.
+ */
+
+extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_callin_map;
+#define cpu_possible_map cpu_callout_map
+
+static inline int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+
+#define __smp_processor_id() read_pda(cpunumber)
+
+extern __inline int hard_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_ID(*(unsigned int *)(APIC_BASE+APIC_ID));
+}
+
+#define safe_smp_processor_id() (disable_apic ? 0 : x86_apicid_to_cpu(hard_smp_processor_id()))
+
+#endif /* !ASSEMBLY */
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+
+#endif
+
+#ifndef ASSEMBLY
+/*
+ * Some lowlevel functions might want to know about
+ * the real APIC ID <-> CPU # mapping.
+ */
+extern u8 x86_cpu_to_apicid[NR_CPUS];	/* physical ID */
+extern u8 x86_cpu_to_log_apicid[NR_CPUS];
+extern u8 bios_cpu_apicid[];
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline int x86_apicid_to_cpu(u8 apicid)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; ++i)
+		if (x86_cpu_to_apicid[i] == apicid)
+			return i;
+
+	/* No entries in x86_cpu_to_apicid?  Either no MPS|ACPI,
+	 * or called too early.  Either way, we must be CPU 0. */
+      	if (x86_cpu_to_apicid[0] == BAD_APICID)
+		return 0;
+
+	return -1;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int)bios_cpu_apicid[mps_cpu];
+	else
+		return BAD_APICID;
+}
+
+#endif /* !ASSEMBLY */
+
+#ifndef CONFIG_SMP
+#define stack_smp_processor_id() 0
+#define safe_smp_processor_id() 0
+#define cpu_logical_map(x) (x)
+#else
+#include <asm/thread_info.h>
+#define stack_smp_processor_id() \
+({ 								\
+	struct thread_info *ti;					\
+	__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK));	\
+	ti->cpu;						\
+})
+#endif
+
+#ifndef __ASSEMBLY__
+static __inline int logical_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
+}
+#endif
+
+#endif
+
diff --git a/include/asm-x86_64/socket.h b/include/asm-x86_64/socket.h
new file mode 100644
index 000000000000..d9a252ea8210
--- /dev/null
+++ b/include/asm-x86_64/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-x86_64/sockios.h b/include/asm-x86_64/sockios.h
new file mode 100644
index 000000000000..2eefd10d4f48
--- /dev/null
+++ b/include/asm-x86_64/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_X8664_SOCKIOS__
+#define __ARCH_X8664_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif
diff --git a/include/asm-x86_64/spinlock.h b/include/asm-x86_64/spinlock.h
new file mode 100644
index 000000000000..5aeb57a3baad
--- /dev/null
+++ b/include/asm-x86_64/spinlock.h
@@ -0,0 +1,214 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+#include <linux/config.h>
+
+extern int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPINLOCK_MAGIC	0xdead4ead
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPINLOCK_MAGIC_INIT	, SPINLOCK_MAGIC
+#else
+#define SPINLOCK_MAGIC_INIT	/* */
+#endif
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
+
+#define spin_lock_init(x)	do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define spin_is_locked(x)	(*(volatile signed char *)(&(x)->lock) <= 0)
+#define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#define spin_lock_string \
+	"\n1:\t" \
+	"lock ; decb %0\n\t" \
+	"js 2f\n" \
+	LOCK_SECTION_START("") \
+	"2:\t" \
+	"rep;nop\n\t" \
+	"cmpb $0,%0\n\t" \
+	"jle 2b\n\t" \
+	"jmp 1b\n" \
+	LOCK_SECTION_END
+
+/*
+ * This works. Despite all the confusion.
+ * (except on PPro SMP or if we are using OOSTORE)
+ * (PPro errata 66, 92)
+ */
+ 
+#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
+
+#define spin_unlock_string \
+	"movb $1,%0" \
+		:"=m" (lock->lock) : : "memory"
+
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(lock->magic != SPINLOCK_MAGIC);
+	assert_spin_locked(lock);
+#endif
+	__asm__ __volatile__(
+		spin_unlock_string
+	);
+}
+
+#else
+
+#define spin_unlock_string \
+	"xchgb %b0, %1" \
+		:"=q" (oldval), "=m" (lock->lock) \
+		:"0" (oldval) : "memory"
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+	char oldval = 1;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(lock->magic != SPINLOCK_MAGIC);
+	assert_spin_locked(lock);
+#endif
+	__asm__ __volatile__(
+		spin_unlock_string
+	);
+}
+
+#endif
+
+static inline int _raw_spin_trylock(spinlock_t *lock)
+{
+	char oldval;
+	__asm__ __volatile__(
+		"xchgb %b0,%1"
+		:"=q" (oldval), "=m" (lock->lock)
+		:"0" (0) : "memory");
+	return oldval > 0;
+}
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	if (lock->magic != SPINLOCK_MAGIC) {
+		printk("eip: %p\n", __builtin_return_address(0));
+		BUG();
+	}
+#endif
+	__asm__ __volatile__(
+		spin_lock_string
+		:"=m" (lock->lock) : : "memory");
+}
+
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned magic;
+#endif
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RWLOCK_MAGIC	0xdeaf1eed
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define RWLOCK_MAGIC_INIT	, RWLOCK_MAGIC
+#else
+#define RWLOCK_MAGIC_INIT	/* */
+#endif
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
+
+#define rwlock_init(x)	do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+
+#define read_can_lock(x)	((int)(x)->lock > 0)
+#define write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
+
+/*
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores.  See
+ * semaphore.h for details.  -ben
+ */
+/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
+
+static inline void _raw_read_lock(rwlock_t *rw)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	__build_read_lock(rw, "__read_lock_failed");
+}
+
+static inline void _raw_write_lock(rwlock_t *rw)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(rw->magic != RWLOCK_MAGIC);
+#endif
+	__build_write_lock(rw, "__write_lock_failed");
+}
+
+#define _raw_read_unlock(rw)		asm volatile("lock ; incl %0" :"=m" ((rw)->lock) : : "memory")
+#define _raw_write_unlock(rw)	asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ",%0":"=m" ((rw)->lock) : : "memory")
+
+static inline int _raw_read_trylock(rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	atomic_dec(count);
+	if (atomic_read(count) >= 0)
+		return 1;
+	atomic_inc(count);
+	return 0;
+}
+
+static inline int _raw_write_trylock(rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-x86_64/stat.h b/include/asm-x86_64/stat.h
new file mode 100644
index 000000000000..fd9f00d560f8
--- /dev/null
+++ b/include/asm-x86_64/stat.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_X86_64_STAT_H
+#define _ASM_X86_64_STAT_H
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long 	st_atime_nsec; 
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+  	long		__unused[3];
+};
+
+/* For 32bit emulation */
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned int  st_size;
+	unsigned int  st_atime;
+	unsigned int  st_mtime;
+	unsigned int  st_ctime;
+};
+
+#endif
diff --git a/include/asm-x86_64/statfs.h b/include/asm-x86_64/statfs.h
new file mode 100644
index 000000000000..b3f4718af30b
--- /dev/null
+++ b/include/asm-x86_64/statfs.h
@@ -0,0 +1,58 @@
+#ifndef _X86_64_STATFS_H
+#define _X86_64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+/*
+ * This is ugly -- we're already 64-bit clean, so just duplicate the 
+ * definitions.
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__((packed));
+
+#endif
diff --git a/include/asm-x86_64/string.h b/include/asm-x86_64/string.h
new file mode 100644
index 000000000000..a3493ee282bb
--- /dev/null
+++ b/include/asm-x86_64/string.h
@@ -0,0 +1,67 @@
+#ifndef _X86_64_STRING_H_
+#define _X86_64_STRING_H_
+
+#ifdef __KERNEL__
+
+/* Written 2002 by Andi Kleen */ 
+
+/* Only used for special circumstances. Stolen from i386/string.h */ 
+static inline void * __inline_memcpy(void * to, const void * from, size_t n)
+{
+unsigned long d0, d1, d2;
+__asm__ __volatile__(
+	"rep ; movsl\n\t"
+	"testb $2,%b4\n\t"
+	"je 1f\n\t"
+	"movsw\n"
+	"1:\ttestb $1,%b4\n\t"
+	"je 2f\n\t"
+	"movsb\n"
+	"2:"
+	: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+	:"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from)
+	: "memory");
+return (to);
+}
+
+/* Even with __builtin_ the compiler may decide to use the out of line
+   function. */
+
+#define __HAVE_ARCH_MEMCPY 1
+extern void *__memcpy(void *to, const void *from, size_t len); 
+#define memcpy(dst,src,len) \
+	({ size_t __len = (len);				\
+	   void *__ret;						\
+	   if (__builtin_constant_p(len) && __len >= 64)	\
+		 __ret = __memcpy((dst),(src),__len);		\
+	   else							\
+		 __ret = __builtin_memcpy((dst),(src),__len);	\
+	   __ret; }) 
+
+
+#define __HAVE_ARCH_MEMSET
+#define memset __builtin_memset
+
+#define __HAVE_ARCH_MEMMOVE
+void * memmove(void * dest,const void *src,size_t count);
+
+/* Use C out of line version for memcmp */ 
+#define memcmp __builtin_memcmp
+int memcmp(const void * cs,const void * ct,size_t count);
+
+/* out of line string functions use always C versions */ 
+#define strlen __builtin_strlen
+size_t strlen(const char * s);
+
+#define strcpy __builtin_strcpy
+char * strcpy(char * dest,const char *src);
+
+#define strcat __builtin_strcat
+char * strcat(char * dest, const char * src);
+
+#define strcmp __builtin_strcmp
+int strcmp(const char * cs,const char * ct);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-x86_64/suspend.h b/include/asm-x86_64/suspend.h
new file mode 100644
index 000000000000..ec745807feae
--- /dev/null
+++ b/include/asm-x86_64/suspend.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2001-2003 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int
+arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+/* Image of the saved processor state. If you touch this, fix acpi_wakeup.S. */
+struct saved_context {
+  	u16 ds, es, fs, gs, ss;
+	unsigned long gs_base, gs_kernel_base, fs_base;
+	unsigned long cr0, cr2, cr3, cr4;
+	u16 gdt_pad;
+	u16 gdt_limit;
+	unsigned long gdt_base;
+	u16 idt_pad;
+	u16 idt_limit;
+	unsigned long idt_base;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+	unsigned long eflags;
+} __attribute__((packed));
+
+/* We'll access these from assembly, so we'd better have them outside struct */
+extern unsigned long saved_context_eax, saved_context_ebx, saved_context_ecx, saved_context_edx;
+extern unsigned long saved_context_esp, saved_context_ebp, saved_context_esi, saved_context_edi;
+extern unsigned long saved_context_r08, saved_context_r09, saved_context_r10, saved_context_r11;
+extern unsigned long saved_context_r12, saved_context_r13, saved_context_r14, saved_context_r15;
+extern unsigned long saved_context_eflags;
+
+#define loaddebug(thread,register) \
+               __asm__("movq %0,%%db" #register  \
+                       : /* no output */ \
+                       :"r" ((thread)->debugreg##register))
+
+extern void fix_processor_context(void);
+
+#ifdef CONFIG_ACPI_SLEEP
+extern unsigned long saved_eip;
+extern unsigned long saved_esp;
+extern unsigned long saved_ebp;
+extern unsigned long saved_ebx;
+extern unsigned long saved_esi;
+extern unsigned long saved_edi;
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+#endif
diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86_64/swiotlb.h
new file mode 100644
index 000000000000..36293061f4ed
--- /dev/null
+++ b/include/asm-x86_64/swiotlb.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_SWIOTLB_H
+#define _ASM_SWTIOLB_H 1
+
+#include <linux/config.h>
+
+/* SWIOTLB interface */
+
+extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr, size_t size,
+				      int dir);
+extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+				  size_t size, int dir);
+extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
+					 dma_addr_t dev_addr,
+					 size_t size, int dir);
+extern void swiotlb_sync_single_for_device(struct device *hwdev,
+					    dma_addr_t dev_addr,
+					    size_t size, int dir);
+extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
+				     struct scatterlist *sg, int nelems,
+				     int dir);
+extern void swiotlb_sync_sg_for_device(struct device *hwdev,
+					struct scatterlist *sg, int nelems,
+					int dir);
+extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
+		      int nents, int direction);
+extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			 int nents, int direction);
+extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
+extern void *swiotlb_alloc_coherent (struct device *hwdev, size_t size,
+				     dma_addr_t *dma_handle, int flags);
+extern void swiotlb_free_coherent (struct device *hwdev, size_t size,
+				   void *vaddr, dma_addr_t dma_handle);
+
+#ifdef CONFIG_SWIOTLB
+extern int swiotlb;
+#else
+#define swiotlb 0
+#endif
+
+#endif
diff --git a/include/asm-x86_64/system.h b/include/asm-x86_64/system.h
new file mode 100644
index 000000000000..76165736e43a
--- /dev/null
+++ b/include/asm-x86_64/system.h
@@ -0,0 +1,343 @@
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX "lock ; "
+#else
+#define LOCK_PREFIX ""
+#endif
+
+#define __STR(x) #x
+#define STR(x) __STR(x)
+
+#define __SAVE(reg,offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
+#define __RESTORE(reg,offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
+
+/* frame pointer must be last for get_wchan */
+#define SAVE_CONTEXT    "pushfq ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popfq\n\t" 
+
+#define __EXTRA_CLOBBER  \
+	,"rcx","rbx","rdx","r8","r9","r10","r11","r12","r13","r14","r15"
+
+#define switch_to(prev,next,last) \
+	asm volatile(SAVE_CONTEXT						    \
+		     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
+		     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
+		     "call __switch_to\n\t"					  \
+		     ".globl thread_return\n"					\
+		     "thread_return:\n\t"					    \
+		     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
+		     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
+		     LOCK "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"		  \
+		     "movq %%rax,%%rdi\n\t" 					  \
+		     "jc   ret_from_fork\n\t"					  \
+		     RESTORE_CONTEXT						    \
+		     : "=a" (last)					  	  \
+		     : [next] "S" (next), [prev] "D" (prev),			  \
+		       [threadrsp] "i" (offsetof(struct task_struct, thread.rsp)), \
+		       [ti_flags] "i" (offsetof(struct thread_info, flags)),\
+		       [tif_fork] "i" (TIF_FORK),			  \
+		       [thread_info] "i" (offsetof(struct task_struct, thread_info)), \
+		       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))   \
+		     : "memory", "cc" __EXTRA_CLOBBER)
+    
+extern void load_gs_index(unsigned); 
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg,value)	\
+	asm volatile("\n"			\
+		"1:\t"				\
+		"movl %k0,%%" #seg "\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:\t"				\
+		"movl %1,%%" #seg "\n\t" 	\
+		"jmp 2b\n"			\
+		".previous\n"			\
+		".section __ex_table,\"a\"\n\t"	\
+		".align 8\n\t"			\
+		".quad 1b,3b\n"			\
+		".previous"			\
+		: :"r" (value), "r" (0))
+
+#define set_debug(value,register) \
+                __asm__("movq %0,%%db" #register  \
+		: /* no output */ \
+		:"r" ((unsigned long) value))
+
+
+#ifdef __KERNEL__
+struct alt_instr { 
+	__u8 *instr; 		/* original instruction */
+	__u8 *replacement;
+	__u8  cpuid;		/* cpuid bit set for replacement */
+	__u8  instrlen;		/* length of original instruction */
+	__u8  replacementlen; 	/* length of new instruction, <= instrlen */ 
+	__u8  pad[5];
+}; 
+#endif
+
+/*
+ * Alternative instructions for different CPU types or capabilities.
+ * 
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ * 
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ * 
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature) 	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n" 		     \
+		      ".section .altinstructions,\"a\"\n"     	     \
+		      "  .align 8\n"				       \
+		      "  .quad 661b\n"            /* label */          \
+		      "  .quad 663f\n"		  /* new instruction */ \
+		      "  .byte %c0\n"             /* feature bit */    \
+		      "  .byte 662b-661b\n"       /* sourcelen */      \
+		      "  .byte 664f-663f\n"       /* replacementlen */ \
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+		      ".previous" :: "i" (feature) : "memory")  
+
+/*
+ * Alternative inline assembly with input.
+ * 
+ * Pecularities:
+ * No memory clobber here. 
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the 
+ * replacement maake sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      "  .align 8\n"					\
+		      "  .quad 661b\n"            /* label */		\
+		      "  .quad 663f\n"		  /* new instruction */	\
+		      "  .byte %c0\n"             /* feature bit */	\
+		      "  .byte 662b-661b\n"       /* sourcelen */	\
+		      "  .byte 664f-663f\n"       /* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+		      ".previous" :: "i" (feature), ##input)
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+
+static inline unsigned long read_cr0(void)
+{ 
+	unsigned long cr0;
+	asm volatile("movq %%cr0,%0" : "=r" (cr0));
+	return cr0;
+} 
+
+static inline void write_cr0(unsigned long val) 
+{ 
+	asm volatile("movq %0,%%cr0" :: "r" (val));
+} 
+
+static inline unsigned long read_cr3(void)
+{ 
+	unsigned long cr3;
+	asm("movq %%cr3,%0" : "=r" (cr3));
+	return cr3;
+} 
+
+static inline unsigned long read_cr4(void)
+{ 
+	unsigned long cr4;
+	asm("movq %%cr4,%0" : "=r" (cr4));
+	return cr4;
+} 
+
+static inline void write_cr4(unsigned long val)
+{ 
+	asm volatile("movq %0,%%cr4" :: "r" (val));
+} 
+
+#define stts() write_cr0(8 | read_cr0())
+
+#define wbinvd() \
+	__asm__ __volatile__ ("wbinvd": : :"memory");
+
+#endif	/* __KERNEL__ */
+
+#define nop() __asm__ __volatile__ ("nop")
+
+#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+#define __xg(x) ((volatile long *)(x))
+
+extern inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
+{
+	*ptr = val;
+}
+
+#define _set_64bit set_64bit
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+		case 1:
+			__asm__ __volatile__("xchgb %b0,%1"
+				:"=q" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 2:
+			__asm__ __volatile__("xchgw %w0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 4:
+			__asm__ __volatile__("xchgl %k0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+		case 8:
+			__asm__ __volatile__("xchgq %0,%1"
+				:"=r" (x)
+				:"m" (*__xg(ptr)), "0" (x)
+				:"memory");
+			break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 2:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 4:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgl %k1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	case 8:
+		__asm__ __volatile__(LOCK_PREFIX "cmpxchgq %1,%2"
+				     : "=a"(prev)
+				     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+				     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+					(unsigned long)(n),sizeof(*(ptr))))
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	do {} while(0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do {} while(0)
+#endif
+
+    
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+
+#ifdef CONFIG_UNORDERED_IO
+#define wmb()	asm volatile("sfence" ::: "memory")
+#else
+#define wmb()	asm volatile("" ::: "memory")
+#endif
+#define read_barrier_depends()	do {} while(0)
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define warn_if_not_ulong(x) do { unsigned long foo; (void) (&(x) == &foo); } while (0)
+
+/* interrupt control.. */
+#define local_save_flags(x)	do { warn_if_not_ulong(x); __asm__ __volatile__("# save_flags \n\t pushfq ; popq %q0":"=g" (x): /* no input */ :"memory"); } while (0)
+#define local_irq_restore(x) 	__asm__ __volatile__("# restore_flags \n\t pushq %0 ; popfq": /* no output */ :"g" (x):"memory", "cc")
+#define local_irq_disable() 	__asm__ __volatile__("cli": : :"memory")
+#define local_irq_enable()	__asm__ __volatile__("sti": : :"memory")
+/* used in the idle loop; sti takes one instruction cycle to complete */
+#define safe_halt()		__asm__ __volatile__("sti; hlt": : :"memory")
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	!(flags & (1<<9));		\
+})
+
+/* For spinlocks etc */
+#define local_irq_save(x) 	do { warn_if_not_ulong(x); __asm__ __volatile__("# local_irq_save \n\t pushfq ; popq %0 ; cli":"=g" (x): /* no input */ :"memory"); } while (0)
+
+void cpu_idle_wait(void);
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+#define HAVE_EAT_KEY
+void eat_key(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif
diff --git a/include/asm-x86_64/termbits.h b/include/asm-x86_64/termbits.h
new file mode 100644
index 000000000000..bd950946e52c
--- /dev/null
+++ b/include/asm-x86_64/termbits.h
@@ -0,0 +1,173 @@
+#ifndef __ARCH_X8664_TERMBITS_H__
+#define __ARCH_X8664_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/include/asm-x86_64/termios.h b/include/asm-x86_64/termios.h
new file mode 100644
index 000000000000..041a91f7ddfb
--- /dev/null
+++ b/include/asm-x86_64/termios.h
@@ -0,0 +1,106 @@
+#ifndef _X8664_TERMIOS_H
+#define _X8664_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _X8664_TERMIOS_H */
diff --git a/include/asm-x86_64/thread_info.h b/include/asm-x86_64/thread_info.h
new file mode 100644
index 000000000000..f4b3b249639c
--- /dev/null
+++ b/include/asm-x86_64/thread_info.h
@@ -0,0 +1,144 @@
+/* thread_info.h: x86_64 low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/pda.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ */
+#ifndef __ASSEMBLY__
+struct task_struct;
+struct exec_domain;
+#include <asm/mmsegment.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			flags;		/* low level flags */
+	__u32			status;		/* thread synchronous flags */
+	__u32			cpu;		/* current CPU */
+	int 			preempt_count;
+
+	mm_segment_t		addr_limit;	
+	struct restart_block    restart_block;
+};
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task	       = &tsk,			\
+	.exec_domain   = &default_exec_domain,	\
+	.flags	       = 0,			\
+	.cpu	       = 0,			\
+	.preempt_count = 1,			\
+	.addr_limit     = KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+static inline struct thread_info *current_thread_info(void)
+{ 
+	struct thread_info *ti;
+	ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
+	return ti; 
+}
+
+/* do not use in interrupt context */
+static inline struct thread_info *stack_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+	return ti;
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) \
+	((struct thread_info *) __get_free_pages(GFP_KERNEL,THREAD_ORDER))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_ORDER)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+	movq %gs:pda_kernelstack,reg ; \
+	subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ * Warning: layout of LSW is hardcoded in entry.S
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
+#define TIF_IRET		5	/* force IRET */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SECCOMP		8	/* secure computing */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_IA32		17	/* 32bit process */ 
+#define TIF_FORK		18	/* ret_from_fork */
+#define TIF_ABI_PENDING		19
+#define TIF_MEMDIE		20
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_IA32		(1<<TIF_IA32)
+#define _TIF_FORK		(1<<TIF_FORK)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK \
+  (0x0000FFFF & ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP))
+/* work to do on any return to user space */
+#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+
+#define PREEMPT_ACTIVE     0x10000000
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-x86_64/timex.h b/include/asm-x86_64/timex.h
new file mode 100644
index 000000000000..34f31a18f90b
--- /dev/null
+++ b/include/asm-x86_64/timex.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/asm-x86_64/timex.h
+ *
+ * x86-64 architecture timex specifications
+ */
+#ifndef _ASMx8664_TIMEX_H
+#define _ASMx8664_TIMEX_H
+
+#include <linux/config.h>
+#include <asm/8253pit.h>
+#include <asm/msr.h>
+#include <asm/vsyscall.h>
+#include <asm/hpet.h>
+
+#define CLOCK_TICK_RATE	PIT_TICK_RATE	/* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	unsigned long long ret;
+
+	rdtscll(ret);
+	return ret;
+}
+
+extern unsigned int cpu_khz;
+
+extern struct vxtime_data vxtime;
+
+#endif
diff --git a/include/asm-x86_64/tlb.h b/include/asm-x86_64/tlb.h
new file mode 100644
index 000000000000..cd4c3c590a0e
--- /dev/null
+++ b/include/asm-x86_64/tlb.h
@@ -0,0 +1,13 @@
+#ifndef TLB_H
+#define TLB_H 1
+
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
new file mode 100644
index 000000000000..2e811ac262af
--- /dev/null
+++ b/include/asm-x86_64/tlbflush.h
@@ -0,0 +1,119 @@
+#ifndef _X8664_TLBFLUSH_H
+#define _X8664_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#define __flush_tlb()							\
+	do {								\
+		unsigned long tmpreg;					\
+									\
+		__asm__ __volatile__(					\
+			"movq %%cr3, %0;  # flush TLB \n"		\
+			"movq %0, %%cr3;              \n"		\
+			: "=r" (tmpreg)					\
+			:: "memory");					\
+	} while (0)
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+#define __flush_tlb_global()						\
+	do {								\
+		unsigned long tmpreg;					\
+									\
+		__asm__ __volatile__(					\
+			"movq %1, %%cr4;  # turn off PGE     \n"	\
+			"movq %%cr3, %0;  # flush TLB        \n"	\
+			"movq %0, %%cr3;                     \n"	\
+			"movq %2, %%cr4;  # turn PGE back on \n"	\
+			: "=&r" (tmpreg)				\
+			: "r" (mmu_cr4_features & ~X86_CR4_PGE),	\
+			  "r" (mmu_cr4_features)			\
+			: "memory");					\
+	} while (0)
+
+extern unsigned long pgkern_mask;
+
+#define __flush_tlb_all() __flush_tlb_global()
+
+#define __flush_tlb_one(addr) \
+	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
+
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ *
+ * ..but the x86_64 has somewhat limited tlb flushing capabilities,
+ * and page-granular flushes are available only on i486 and up.
+ */
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb() __flush_tlb()
+#define flush_tlb_all() __flush_tlb_all()
+#define local_flush_tlb() __flush_tlb()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long addr)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb_one(addr);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb();
+}
+
+#else
+
+#include <asm/smp.h>
+
+#define local_flush_tlb() \
+	__flush_tlb()
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+
+#define flush_tlb()	flush_tlb_current_task()
+
+static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+#define TLBSTATE_OK	1
+#define TLBSTATE_LAZY	2
+
+#endif
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	/* x86_64 does not keep any page table caches in TLB */
+}
+
+#endif /* _X8664_TLBFLUSH_H */
diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h
new file mode 100644
index 000000000000..67f24e0ea819
--- /dev/null
+++ b/include/asm-x86_64/topology.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_64_TOPOLOGY_H
+#define _ASM_X86_64_TOPOLOGY_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#include <asm/mpspec.h>
+#include <asm/bitops.h>
+
+/* Map the K8 CPU local memory controllers to a simple 1:1 CPU:NODE topology */
+
+extern cpumask_t cpu_online_map;
+
+extern unsigned char cpu_to_node[];
+extern cpumask_t     node_to_cpumask[];
+extern cpumask_t pci_bus_to_cpumask[];
+
+#ifdef CONFIG_ACPI_NUMA
+extern int __node_distance(int, int);
+#define node_distance(a,b) __node_distance(a,b)
+/* #else fallback version */
+#endif
+
+#define cpu_to_node(cpu)		(cpu_to_node[cpu])
+#define parent_node(node)		(node)
+#define node_to_first_cpu(node) 	(__ffs(node_to_cpumask[node]))
+#define node_to_cpumask(node)		(node_to_cpumask[node])
+
+static inline cpumask_t __pcibus_to_cpumask(int bus)
+{
+	cpumask_t busmask = pci_bus_to_cpumask[bus];
+	cpumask_t online = cpu_online_map;
+	cpumask_t res;
+	cpus_and(res, busmask, online);
+	return res;
+}
+#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus->number)
+
+#ifdef CONFIG_NUMA
+/* sched_domains SD_NODE_INIT for x86_64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+#endif
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif
diff --git a/include/asm-x86_64/types.h b/include/asm-x86_64/types.h
new file mode 100644
index 000000000000..32bd1426b523
--- /dev/null
+++ b/include/asm-x86_64/types.h
@@ -0,0 +1,60 @@
+#ifndef _X86_64_TYPES_H
+#define _X86_64_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long long __s64;
+typedef unsigned long long  __u64;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+typedef u64 dma64_addr_t;
+typedef u64 dma_addr_t;
+
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+
+typedef unsigned short kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h
new file mode 100644
index 000000000000..48f292752c96
--- /dev/null
+++ b/include/asm-x86_64/uaccess.h
@@ -0,0 +1,365 @@
+#ifndef __X86_64_UACCESS_H
+#define __X86_64_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/prefetch.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFFFFFFFFFUL)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr) (!((unsigned long)(addr) & (current_thread_info()->addr_limit.seg)))
+
+/*
+ * Uhhuh, this needs 65-bit arithmetic. We have a carry..
+ */
+#define __range_not_ok(addr,size) ({ \
+	unsigned long flag,sum; \
+	__chk_user_ptr(addr); \
+	asm("# range_ok\n\r" \
+		"addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0"  \
+		:"=&r" (flag), "=r" (sum) \
+		:"1" (addr),"g" ((long)(size)),"g" (current_thread_info()->addr_limit.seg)); \
+	flag; })
+
+#define access_ok(type, addr, size) (__range_not_ok(addr,size) == 0)
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+	return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+#define ARCH_HAS_SEARCH_EXTABLE
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+#define __get_user_x(size,ret,x,ptr) \
+	__asm__ __volatile__("call __get_user_" #size \
+		:"=a" (ret),"=d" (x) \
+		:"c" (ptr) \
+		:"r8")
+
+/* Careful: we have to cast the result to the type of the pointer for sign reasons */
+#define get_user(x,ptr)							\
+({	unsigned long __val_gu;						\
+	int __ret_gu; 							\
+	__chk_user_ptr(ptr);						\
+	switch(sizeof (*(ptr))) {					\
+	case 1:  __get_user_x(1,__ret_gu,__val_gu,ptr); break;		\
+	case 2:  __get_user_x(2,__ret_gu,__val_gu,ptr); break;		\
+	case 4:  __get_user_x(4,__ret_gu,__val_gu,ptr); break;		\
+	case 8:  __get_user_x(8,__ret_gu,__val_gu,ptr); break;		\
+	default: __get_user_bad(); break;				\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+extern void __put_user_bad(void);
+
+#define __put_user_x(size,ret,x,ptr)					\
+	__asm__ __volatile__("call __put_user_" #size			\
+		:"=a" (ret)						\
+		:"c" (ptr),"d" (x)					\
+		:"r8")
+
+#define put_user(x,ptr)							\
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+#define __put_user_nocheck(x,ptr,size)			\
+({							\
+	int __pu_err;					\
+	__put_user_size((x),(ptr),(size),__pu_err);	\
+	__pu_err;					\
+})
+
+
+#define __put_user_check(x,ptr,size)			\
+({							\
+	int __pu_err;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);	\
+	switch (size) { 				\
+	case 1: __put_user_x(1,__pu_err,x,__pu_addr); break;	\
+	case 2: __put_user_x(2,__pu_err,x,__pu_addr); break;	\
+	case 4: __put_user_x(4,__pu_err,x,__pu_addr); break;	\
+	case 8: __put_user_x(8,__pu_err,x,__pu_addr); break;	\
+	default: __put_user_bad();			\
+	}						\
+	__pu_err;					\
+})
+
+#define __put_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __put_user_asm(x,ptr,retval,"b","b","iq",-EFAULT); break;\
+	  case 2: __put_user_asm(x,ptr,retval,"w","w","ir",-EFAULT); break;\
+	  case 4: __put_user_asm(x,ptr,retval,"l","k","ir",-EFAULT); break;\
+	  case 8: __put_user_asm(x,ptr,retval,"q","","ir",-EFAULT); break;\
+	  default: __put_user_bad();					\
+	}								\
+} while (0)
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno)	\
+	__asm__ __volatile__(					\
+		"1:	mov"itype" %"rtype"1,%2\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	mov %3,%0\n"				\
+		"	jmp 2b\n"				\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 8\n"				\
+		"	.quad 1b,3b\n"				\
+		".previous"					\
+		: "=r"(err)					\
+		: ltype (x), "m"(__m(addr)), "i"(errno), "0"(err))
+
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	int __gu_err;						\
+	unsigned long __gu_val;					\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __get_user_asm(x,ptr,retval,"b","b","=q",-EFAULT); break;\
+	  case 2: __get_user_asm(x,ptr,retval,"w","w","=r",-EFAULT); break;\
+	  case 4: __get_user_asm(x,ptr,retval,"l","k","=r",-EFAULT); break;\
+	  case 8: __get_user_asm(x,ptr,retval,"q","","=r",-EFAULT); break;\
+	  default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno)	\
+	__asm__ __volatile__(					\
+		"1:	mov"itype" %2,%"rtype"1\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	mov %3,%0\n"				\
+		"	xor"itype" %"rtype"1,%"rtype"1\n"	\
+		"	jmp 2b\n"				\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align 8\n"				\
+		"	.quad 1b,3b\n"				\
+		".previous"					\
+		: "=r"(err), ltype (x)				\
+		: "m"(__m(addr)), "i"(errno), "0"(err))
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Handles exceptions in both to and from, but doesn't do access_ok */
+extern unsigned long copy_user_generic(void *to, const void *from, unsigned len); 
+
+extern unsigned long copy_to_user(void __user *to, const void *from, unsigned len); 
+extern unsigned long copy_from_user(void *to, const void __user *from, unsigned len); 
+extern unsigned long copy_in_user(void __user *to, const void __user *from, unsigned len); 
+
+static inline int __copy_from_user(void *dst, const void __user *src, unsigned size) 
+{ 
+       int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic(dst,(__force void *)src,size);
+	switch (size) { 
+	case 1:__get_user_asm(*(u8*)dst,(u8 __user *)src,ret,"b","b","=q",1); 
+		return ret;
+	case 2:__get_user_asm(*(u16*)dst,(u16 __user *)src,ret,"w","w","=r",2);
+		return ret;
+	case 4:__get_user_asm(*(u32*)dst,(u32 __user *)src,ret,"l","k","=r",4);
+		return ret;
+	case 8:__get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",8);
+		return ret; 
+	case 10:
+	       	__get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",16);
+		if (unlikely(ret)) return ret;
+		__get_user_asm(*(u16*)(8+(char*)dst),(u16 __user *)(8+(char __user *)src),ret,"w","w","=r",2);
+		return ret; 
+	case 16:
+		__get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",16);
+		if (unlikely(ret)) return ret;
+		__get_user_asm(*(u64*)(8+(char*)dst),(u64 __user *)(8+(char __user *)src),ret,"q","","=r",8);
+		return ret; 
+	default:
+		return copy_user_generic(dst,(__force void *)src,size); 
+	}
+}	
+
+static inline int __copy_to_user(void __user *dst, const void *src, unsigned size) 
+{ 
+       int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst,src,size);
+	switch (size) { 
+	case 1:__put_user_asm(*(u8*)src,(u8 __user *)dst,ret,"b","b","iq",1); 
+		return ret;
+	case 2:__put_user_asm(*(u16*)src,(u16 __user *)dst,ret,"w","w","ir",2);
+		return ret;
+	case 4:__put_user_asm(*(u32*)src,(u32 __user *)dst,ret,"l","k","ir",4);
+		return ret;
+	case 8:__put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",8);
+		return ret; 
+	case 10:
+		__put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",10);
+		if (unlikely(ret)) return ret;
+		asm("":::"memory");
+		__put_user_asm(4[(u16*)src],4+(u16 __user *)dst,ret,"w","w","ir",2);
+		return ret; 
+	case 16:
+		__put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",16);
+		if (unlikely(ret)) return ret;
+		asm("":::"memory");
+		__put_user_asm(1[(u64*)src],1+(u64 __user *)dst,ret,"q","","ir",8);
+		return ret; 
+	default:
+		return copy_user_generic((__force void *)dst,src,size); 
+	}
+}	
+
+
+static inline int __copy_in_user(void __user *dst, const void __user *src, unsigned size) 
+{ 
+       int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst,(__force void *)src,size);
+	switch (size) { 
+	case 1: { 
+		u8 tmp;
+		__get_user_asm(tmp,(u8 __user *)src,ret,"b","b","=q",1); 
+		if (likely(!ret))
+			__put_user_asm(tmp,(u8 __user *)dst,ret,"b","b","iq",1); 
+		return ret;
+	}
+	case 2: { 
+		u16 tmp;
+		__get_user_asm(tmp,(u16 __user *)src,ret,"w","w","=r",2); 
+		if (likely(!ret))
+			__put_user_asm(tmp,(u16 __user *)dst,ret,"w","w","ir",2); 
+		return ret;
+	}
+
+	case 4: { 
+		u32 tmp;
+		__get_user_asm(tmp,(u32 __user *)src,ret,"l","k","=r",4); 
+		if (likely(!ret))
+			__put_user_asm(tmp,(u32 __user *)dst,ret,"l","k","ir",4); 
+		return ret;
+	}
+	case 8: { 
+		u64 tmp;
+		__get_user_asm(tmp,(u64 __user *)src,ret,"q","","=r",8); 
+		if (likely(!ret))
+			__put_user_asm(tmp,(u64 __user *)dst,ret,"q","","ir",8); 
+		return ret;
+	}
+	default:
+		return copy_user_generic((__force void *)dst,(__force void *)src,size); 
+	}
+}	
+
+long strncpy_from_user(char *dst, const char __user *src, long count);
+long __strncpy_from_user(char *dst, const char __user *src, long count);
+long strnlen_user(const char __user *str, long n);
+long strlen_user(const char __user *str);
+unsigned long clear_user(void __user *mem, unsigned long len);
+unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif /* __X86_64_UACCESS_H */
diff --git a/include/asm-x86_64/ucontext.h b/include/asm-x86_64/ucontext.h
new file mode 100644
index 000000000000..159a3da9e112
--- /dev/null
+++ b/include/asm-x86_64/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASMX8664_UCONTEXT_H
+#define _ASMX8664_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/include/asm-x86_64/unaligned.h b/include/asm-x86_64/unaligned.h
new file mode 100644
index 000000000000..d4bf78dc6f39
--- /dev/null
+++ b/include/asm-x86_64/unaligned.h
@@ -0,0 +1,37 @@
+#ifndef __X8664_UNALIGNED_H
+#define __X8664_UNALIGNED_H
+
+/*
+ * The x86-64 can do unaligned accesses itself. 
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+/**
+ * get_unaligned - get value from possibly mis-aligned location
+ * @ptr: pointer to value
+ *
+ * This macro should be used for accessing values larger in size than 
+ * single bytes at locations that are expected to be improperly aligned, 
+ * e.g. retrieving a u16 value from a location not u16-aligned.
+ *
+ * Note that unaligned accesses can be very expensive on some architectures.
+ */
+#define get_unaligned(ptr) (*(ptr))
+
+/**
+ * put_unaligned - put value to a possibly mis-aligned location
+ * @val: value to place
+ * @ptr: pointer to location
+ *
+ * This macro should be used for placing values larger in size than 
+ * single bytes at locations that are expected to be improperly aligned, 
+ * e.g. writing a u16 value to a location not u16-aligned.
+ *
+ * Note that unaligned accesses can be very expensive on some architectures.
+ */
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
new file mode 100644
index 000000000000..a8ea0164f3ab
--- /dev/null
+++ b/include/asm-x86_64/unistd.h
@@ -0,0 +1,797 @@
+#ifndef _ASM_X86_64_UNISTD_H_
+#define _ASM_X86_64_UNISTD_H_
+
+#ifndef __SYSCALL
+#define __SYSCALL(a,b) 
+#endif
+
+/*
+ * This file contains the system call numbers.
+ * 
+ * Note: holes are not allowed.
+ */
+
+/* at least 8 syscall per cacheline */
+#define __NR_read                                0
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write                               1
+__SYSCALL(__NR_write, sys_write)
+#define __NR_open                                2
+__SYSCALL(__NR_open, sys_open)
+#define __NR_close                               3
+__SYSCALL(__NR_close, sys_close)
+#define __NR_stat                                4
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_fstat                               5
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_lstat                               6
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_poll                                7
+__SYSCALL(__NR_poll, sys_poll)
+
+#define __NR_lseek                               8
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap                                9
+__SYSCALL(__NR_mmap, sys_mmap)
+#define __NR_mprotect                           10
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_munmap                             11
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_brk                                12
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_rt_sigaction                       13
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
+#define __NR_rt_sigprocmask                     14
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigreturn                       15
+__SYSCALL(__NR_rt_sigreturn, stub_rt_sigreturn)
+
+#define __NR_ioctl                              16
+__SYSCALL(__NR_ioctl, sys_ioctl)
+#define __NR_pread64                            17
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64                           18
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_readv                              19
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev                             20
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_access                             21
+__SYSCALL(__NR_access, sys_access)
+#define __NR_pipe                               22
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_select                             23
+__SYSCALL(__NR_select, sys_select)
+
+#define __NR_sched_yield                        24
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_mremap                             25
+__SYSCALL(__NR_mremap, sys_mremap)
+#define __NR_msync                              26
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mincore                            27
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise                            28
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_shmget                             29
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmat                              30
+__SYSCALL(__NR_shmat, wrap_sys_shmat)
+#define __NR_shmctl                             31
+__SYSCALL(__NR_shmctl, sys_shmctl)
+
+#define __NR_dup                                32
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup2                               33
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_pause                              34
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_nanosleep                          35
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+#define __NR_getitimer                          36
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_alarm                              37
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_setitimer                          38
+__SYSCALL(__NR_setitimer, sys_setitimer)
+#define __NR_getpid                             39
+__SYSCALL(__NR_getpid, sys_getpid)
+
+#define __NR_sendfile                           40
+__SYSCALL(__NR_sendfile, sys_sendfile64)
+#define __NR_socket                             41
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_connect                            42
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_accept                             43
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_sendto                             44
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom                           45
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_sendmsg                            46
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg                            47
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+
+#define __NR_shutdown                           48
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_bind                               49
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen                             50
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_getsockname                        51
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername                        52
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_socketpair                         53
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_setsockopt                         54
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt                         55
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+
+#define __NR_clone                              56
+__SYSCALL(__NR_clone, stub_clone)
+#define __NR_fork                               57
+__SYSCALL(__NR_fork, stub_fork) 
+#define __NR_vfork                              58
+__SYSCALL(__NR_vfork, stub_vfork)
+#define __NR_execve                             59
+__SYSCALL(__NR_execve, stub_execve)
+#define __NR_exit                               60
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_wait4                              61
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_kill                               62
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_uname                              63
+__SYSCALL(__NR_uname, sys_uname)
+
+#define __NR_semget                             64
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semop                              65
+__SYSCALL(__NR_semop, sys_semop)
+#define __NR_semctl                             66
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_shmdt                              67
+__SYSCALL(__NR_shmdt, sys_shmdt)
+#define __NR_msgget                             68
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgsnd                             69
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+#define __NR_msgrcv                             70
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgctl                             71
+__SYSCALL(__NR_msgctl, sys_msgctl)
+
+#define __NR_fcntl                              72
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_flock                              73
+__SYSCALL(__NR_flock, sys_flock)
+#define __NR_fsync                              74
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync                          75
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR_truncate                           76
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_ftruncate                          77
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_getdents                           78
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_getcwd                             79
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+#define __NR_chdir                              80
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir                             81
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_rename                             82
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_mkdir                              83
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir                              84
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_creat                              85
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_link                               86
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink                             87
+__SYSCALL(__NR_unlink, sys_unlink)
+
+#define __NR_symlink                            88
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_readlink                           89
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_chmod                              90
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_fchmod                             91
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_chown                              92
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_fchown                             93
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_lchown                             94
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_umask                              95
+__SYSCALL(__NR_umask, sys_umask)
+
+#define __NR_gettimeofday                       96
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_getrlimit                          97
+__SYSCALL(__NR_getrlimit, sys_getrlimit)
+#define __NR_getrusage                          98
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_sysinfo                            99
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+#define __NR_times                             100
+__SYSCALL(__NR_times, sys_times)
+#define __NR_ptrace                            101
+__SYSCALL(__NR_ptrace, sys_ptrace)
+#define __NR_getuid                            102
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_syslog                            103
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* at the very end the stuff that never runs during the benchmarks */
+#define __NR_getgid                            104
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_setuid                            105
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setgid                            106
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_geteuid                           107
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getegid                           108
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_setpgid                           109
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getppid                           110
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getpgrp                           111
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+
+#define __NR_setsid                            112
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_setreuid                          113
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setregid                          114
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_getgroups                         115
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups                         116
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_setresuid                         117
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid                         118
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid                         119
+__SYSCALL(__NR_setresgid, sys_setresgid)
+
+#define __NR_getresgid                         120
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_getpgid                           121
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_setfsuid                          122
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid                          123
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_getsid                            124
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_capget                            125
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset                            126
+__SYSCALL(__NR_capset, sys_capset)
+
+#define __NR_rt_sigpending                     127
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait                   128
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo                   129
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigsuspend                     130
+__SYSCALL(__NR_rt_sigsuspend, stub_rt_sigsuspend)
+#define __NR_sigaltstack                       131
+__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
+#define __NR_utime                             132
+__SYSCALL(__NR_utime, sys_utime)
+#define __NR_mknod                             133
+__SYSCALL(__NR_mknod, sys_mknod)
+
+/* Only needed for a.out */
+#define __NR_uselib                            134
+__SYSCALL(__NR_uselib, sys_ni_syscall)
+#define __NR_personality                       135
+__SYSCALL(__NR_personality, sys_personality)
+
+#define __NR_ustat                             136
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_statfs                            137
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_fstatfs                           138
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_sysfs                             139
+__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#define __NR_getpriority                       140
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_setpriority                       141
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_sched_setparam                    142
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_getparam                    143
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setscheduler                144
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler                145
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_get_priority_max            146
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min            147
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval             148
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+
+#define __NR_mlock                             149
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock                           150
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall                          151
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall                        152
+__SYSCALL(__NR_munlockall, sys_munlockall)
+
+#define __NR_vhangup                           153
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+#define __NR_modify_ldt                        154
+__SYSCALL(__NR_modify_ldt, sys_modify_ldt)
+
+#define __NR_pivot_root                        155
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+#define __NR__sysctl                           156
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_prctl                             157
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_arch_prctl                        158
+__SYSCALL(__NR_arch_prctl,	sys_arch_prctl) 
+
+#define __NR_adjtimex                          159
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+
+#define __NR_setrlimit                         160
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+
+#define __NR_chroot                            161
+__SYSCALL(__NR_chroot, sys_chroot)
+
+#define __NR_sync                              162
+__SYSCALL(__NR_sync, sys_sync)
+
+#define __NR_acct                              163
+__SYSCALL(__NR_acct, sys_acct)
+
+#define __NR_settimeofday                      164
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+
+#define __NR_mount                             165
+__SYSCALL(__NR_mount, sys_mount)
+#define __NR_umount2                           166
+__SYSCALL(__NR_umount2, sys_umount)
+
+#define __NR_swapon                            167
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff                           168
+__SYSCALL(__NR_swapoff, sys_swapoff)
+
+#define __NR_reboot                            169
+__SYSCALL(__NR_reboot, sys_reboot)
+
+#define __NR_sethostname                       170
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname                     171
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+
+#define __NR_iopl                              172
+__SYSCALL(__NR_iopl, stub_iopl)
+#define __NR_ioperm                            173
+__SYSCALL(__NR_ioperm, sys_ioperm)
+
+#define __NR_create_module                     174
+__SYSCALL(__NR_create_module, sys_ni_syscall)
+#define __NR_init_module                       175
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module                     176
+__SYSCALL(__NR_delete_module, sys_delete_module)
+#define __NR_get_kernel_syms                   177
+__SYSCALL(__NR_get_kernel_syms, sys_ni_syscall)
+#define __NR_query_module                      178
+__SYSCALL(__NR_query_module, sys_ni_syscall)
+
+#define __NR_quotactl                          179
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+#define __NR_nfsservctl                        180
+__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+
+#define __NR_getpmsg                           181	/* reserved for LiS/STREAMS */
+__SYSCALL(__NR_getpmsg, sys_ni_syscall)
+#define __NR_putpmsg                           182	/* reserved for LiS/STREAMS */
+__SYSCALL(__NR_putpmsg, sys_ni_syscall)
+
+#define __NR_afs_syscall                       183	/* reserved for AFS */ 
+__SYSCALL(__NR_afs_syscall, sys_ni_syscall)
+
+#define __NR_tuxcall      		184 /* reserved for tux */
+__SYSCALL(__NR_tuxcall, sys_ni_syscall)
+
+#define __NR_security			185
+__SYSCALL(__NR_security, sys_ni_syscall)
+
+#define __NR_gettid		186
+__SYSCALL(__NR_gettid, sys_gettid)
+
+#define __NR_readahead		187
+__SYSCALL(__NR_readahead, sys_readahead)
+#define __NR_setxattr		188
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr		189
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr		190
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr		191
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr		192
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr		193
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr) 
+#define __NR_listxattr		194
+__SYSCALL(__NR_listxattr, sys_listxattr) 
+#define __NR_llistxattr		195
+__SYSCALL(__NR_llistxattr, sys_llistxattr) 
+#define __NR_flistxattr		196
+__SYSCALL(__NR_flistxattr, sys_flistxattr) 
+#define __NR_removexattr	197
+__SYSCALL(__NR_removexattr, sys_removexattr) 
+#define __NR_lremovexattr	198
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr) 
+#define __NR_fremovexattr	199
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr) 
+#define __NR_tkill	200
+__SYSCALL(__NR_tkill, sys_tkill) 
+#define __NR_time      201
+__SYSCALL(__NR_time, sys_time64)
+#define __NR_futex     202
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_sched_setaffinity    203
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity     204
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_set_thread_area	205
+__SYSCALL(__NR_set_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_io_setup	206
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy	207
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_getevents	208
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+#define __NR_io_submit	209
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel	210
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_get_thread_area	211
+__SYSCALL(__NR_get_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_lookup_dcookie	212
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+#define __NR_epoll_create	213
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_epoll_ctl_old	214
+__SYSCALL(__NR_epoll_ctl_old, sys_ni_syscall)
+#define __NR_epoll_wait_old	215
+__SYSCALL(__NR_epoll_wait_old, sys_ni_syscall)
+#define __NR_remap_file_pages	216
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_getdents64	217
+__SYSCALL(__NR_getdents64, sys_getdents64)
+#define __NR_set_tid_address	218
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_restart_syscall	219
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_semtimedop		220
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_fadvise64		221
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_timer_create		222
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_settime		223
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_gettime		224
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun		225
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_delete	226
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime	227
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime	228
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres	229
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep	230
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+#define __NR_exit_group		231
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_epoll_wait		232
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_epoll_ctl		233
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_tgkill		234
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_utimes		235
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR_vserver		236
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_vserver		236
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_mbind 		237
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_set_mempolicy 	238
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_get_mempolicy 	239
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_mq_open 		240
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink 		241
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 	242
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive	243
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify 		244
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr 	245
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+#define __NR_kexec_load 	246
+__SYSCALL(__NR_kexec_load, sys_ni_syscall)
+#define __NR_waitid		247
+__SYSCALL(__NR_waitid, sys_waitid)
+#define __NR_add_key		248
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key	249
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl		250
+__SYSCALL(__NR_keyctl, sys_keyctl)
+
+#define __NR_syscall_max __NR_keyctl
+#ifndef __NO_STUBS
+
+/* user-visible error numbers are in the range -1 - -4095 */
+
+#define __syscall_clobber "r11","rcx","memory" 
+
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-127)) { \
+		errno = -(res); \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#ifndef __KERNEL_SYSCALLS__
+
+#define __syscall "syscall"
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name) : __syscall_clobber ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)) : __syscall_clobber ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)) : __syscall_clobber ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)), \
+		  "d" ((long)(arg3)) : __syscall_clobber); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+long __res; \
+__asm__ volatile ("movq %5,%%r10 ;" __syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)), \
+	  "d" ((long)(arg3)),"g" ((long)(arg4)) : __syscall_clobber,"r10" ); \
+__syscall_return(type,__res); \
+} 
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)), \
+	  "d" ((long)(arg3)),"g" ((long)(arg4)),"g" ((long)(arg5)) : \
+	__syscall_clobber,"r8","r10" ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
+	  type5,arg5,type6,arg6) \
+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \
+{ \
+long __res; \
+__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; movq %7,%%r9 ; " __syscall \
+	: "=a" (__res) \
+	: "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)), \
+	  "d" ((long)(arg3)), "g" ((long)(arg4)), "g" ((long)(arg5)), \
+	  "g" ((long)(arg6)) : \
+	__syscall_clobber,"r8","r10","r9" ); \
+__syscall_return(type,__res); \
+}
+
+#else /* __KERNEL_SYSCALLS__ */
+
+#include <linux/syscalls.h>
+#include <asm/ptrace.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+
+static inline pid_t setsid(void)
+{
+	return sys_setsid();
+}
+
+static inline ssize_t write(unsigned int fd, char * buf, size_t count)
+{
+	return sys_write(fd, buf, count);
+}
+
+static inline ssize_t read(unsigned int fd, char * buf, size_t count)
+{
+	return sys_read(fd, buf, count);
+}
+
+static inline off_t lseek(unsigned int fd, off_t offset, unsigned int origin)
+{
+	return sys_lseek(fd, offset, origin);
+}
+
+static inline long dup(unsigned int fd)
+{
+	return sys_dup(fd);
+}
+
+/* implemented in asm in arch/x86_64/kernel/entry.S */
+extern int execve(const char *, char * const *, char * const *);
+
+static inline long open(const char * filename, int flags, int mode)
+{
+	return sys_open(filename, flags, mode);
+}
+
+static inline long close(unsigned int fd)
+{
+	return sys_close(fd);
+}
+
+static inline pid_t waitpid(int pid, int * wait_stat, int flags)
+{
+	return sys_wait4(pid, wait_stat, flags, NULL);
+}
+
+extern long sys_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long off);
+
+extern int sys_modify_ldt(int func, void *ptr, unsigned long bytecount);
+
+asmlinkage long sys_execve(char *name, char **argv, char **envp,
+			struct pt_regs regs);
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+			void *parent_tid, void *child_tid,
+			struct pt_regs regs);
+asmlinkage long sys_fork(struct pt_regs regs);
+asmlinkage long sys_vfork(struct pt_regs regs);
+asmlinkage long sys_pipe(int *fildes);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+#if !defined(__ASSEMBLY__) && defined(__KERNEL__)
+
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+asmlinkage long sys_ptrace(long request, long pid,
+				unsigned long addr, long data);
+asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs);
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __NO_STUBS */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif
diff --git a/include/asm-x86_64/user.h b/include/asm-x86_64/user.h
new file mode 100644
index 000000000000..12785c649ac5
--- /dev/null
+++ b/include/asm-x86_64/user.h
@@ -0,0 +1,114 @@
+#ifndef _X86_64_USER_H
+#define _X86_64_USER_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user.
+   There are quite a number of obstacles to being able to view the
+   contents of the floating point registers, and until these are
+   solved you will not be able to view the contents of them.
+   Actually, you can read in the core file and look at the contents of
+   the user struct to find out what the floating point registers
+   contain.
+
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.  */
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ * 
+ * x86-64 support by Andi Kleen.
+ */
+
+/* This matches the 64bit FXSAVE format as defined by AMD. It is the same
+   as the 32bit format defined by Intel, except that the selector:offset pairs for
+   data and eip are replaced with flat 64bit pointers. */ 
+struct user_i387_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd; /* Note this is not the same as the 32bit/x87/FSAVE twd */
+	unsigned short	fop;
+	__u64	rip;
+	__u64	rdp;
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 256 bytes */
+	__u32	padding[24];
+};
+
+/*
+ * Segment register layout in coredumps.
+ */
+struct user_regs_struct {
+	unsigned long r15,r14,r13,r12,rbp,rbx,r11,r10;
+	unsigned long r9,r8,rax,rcx,rdx,rsi,rdi,orig_rax;
+	unsigned long rip,cs,eflags;
+	unsigned long rsp,ss;
+  	unsigned long fs_base, gs_base;
+	unsigned long ds,es,fs,gs; 
+}; 
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+  int pad0;
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  int pad1;
+  struct user_pt_regs * u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct* u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  unsigned long u_debugreg[8];
+  unsigned long error_code; /* CPU error code or 0 */
+  unsigned long fault_address; /* CR3 or 0 */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _X86_64_USER_H */
diff --git a/include/asm-x86_64/user32.h b/include/asm-x86_64/user32.h
new file mode 100644
index 000000000000..f769872debea
--- /dev/null
+++ b/include/asm-x86_64/user32.h
@@ -0,0 +1,69 @@
+#ifndef USER32_H
+#define USER32_H 1
+
+/* IA32 compatible user structures for ptrace. These should be used for 32bit coredumps too. */
+
+struct user_i387_ia32_struct {
+	u32	cwd;
+	u32	swd;
+	u32	twd;
+	u32	fip;
+	u32	fcs;
+	u32	foo;
+	u32	fos;
+	u32	st_space[20];   /* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+/* FSAVE frame with extensions */
+struct user32_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;	/* not compatible to 64bit twd */
+	unsigned short	fop;
+	int	fip;
+	int	fcs;
+	int	foo;
+	int	fos;
+	int	mxcsr;
+	int	reserved;
+	int	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	int	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	int	padding[56];
+};
+
+struct user_regs_struct32 {
+	__u32 ebx, ecx, edx, esi, edi, ebp, eax;
+	unsigned short ds, __ds, es, __es;
+	unsigned short fs, __fs, gs, __gs;
+	__u32 orig_eax, eip;
+	unsigned short cs, __cs;
+	__u32 eflags, esp;
+	unsigned short ss, __ss;
+};
+
+struct user32 {
+  struct user_regs_struct32 regs;		/* Where the registers are actually stored */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+  struct user_i387_ia32_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  __u32 u_tsize;	/* Text segment size (pages). */
+  __u32 u_dsize;	/* Data segment size (pages). */
+  __u32 u_ssize;	/* Stack segment size (pages). */
+  __u32 start_code;     /* Starting virtual address of text. */
+  __u32 start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  __u32 signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No __u32er used */
+  __u32 u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  __u32 u_fpstate;	/* Math Co-processor pointer. */
+  __u32 magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+
+
+#endif
diff --git a/include/asm-x86_64/vga.h b/include/asm-x86_64/vga.h
new file mode 100644
index 000000000000..ef0c0e50cc95
--- /dev/null
+++ b/include/asm-x86_64/vga.h
@@ -0,0 +1,20 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif
diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86_64/vsyscall.h
new file mode 100644
index 000000000000..b0c8d4339906
--- /dev/null
+++ b/include/asm-x86_64/vsyscall.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_64_VSYSCALL_H_
+#define _ASM_X86_64_VSYSCALL_H_
+
+#include <linux/seqlock.h>
+
+enum vsyscall_num {
+	__NR_vgettimeofday,
+	__NR_vtime,
+};
+
+#define VSYSCALL_START (-10UL << 20)
+#define VSYSCALL_SIZE 1024
+#define VSYSCALL_END (-2UL << 20)
+#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
+
+#ifdef __KERNEL__
+
+#define __section_vxtime __attribute__ ((unused, __section__ (".vxtime"), aligned(16)))
+#define __section_wall_jiffies __attribute__ ((unused, __section__ (".wall_jiffies"), aligned(16)))
+#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
+#define __section_sys_tz __attribute__ ((unused, __section__ (".sys_tz"), aligned(16)))
+#define __section_sysctl_vsyscall __attribute__ ((unused, __section__ (".sysctl_vsyscall"), aligned(16)))
+#define __section_xtime __attribute__ ((unused, __section__ (".xtime"), aligned(16)))
+#define __section_xtime_lock __attribute__ ((unused, __section__ (".xtime_lock"), aligned(16)))
+
+#define VXTIME_TSC	1
+#define VXTIME_HPET	2
+
+struct vxtime_data {
+	long hpet_address;	/* HPET base address */
+	unsigned long hz;	/* HPET clocks / sec */
+	int last;
+	unsigned long last_tsc;
+	long quot;
+	long tsc_quot;
+	int mode;
+};
+
+#define hpet_readl(a)           readl((void *)fix_to_virt(FIX_HPET_BASE) + a)
+#define hpet_writel(d,a)        writel(d, (void *)fix_to_virt(FIX_HPET_BASE) + a)
+
+/* vsyscall space (readonly) */
+extern struct vxtime_data __vxtime;
+extern struct timespec __xtime;
+extern volatile unsigned long __jiffies;
+extern unsigned long __wall_jiffies;
+extern struct timezone __sys_tz;
+extern seqlock_t __xtime_lock;
+
+/* kernel space (writeable) */
+extern struct vxtime_data vxtime;
+extern unsigned long wall_jiffies;
+extern struct timezone sys_tz;
+extern int sysctl_vsyscall;
+extern seqlock_t xtime_lock;
+
+#define ARCH_HAVE_XTIME_LOCK 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_64_VSYSCALL_H_ */
diff --git a/include/asm-x86_64/vsyscall32.h b/include/asm-x86_64/vsyscall32.h
new file mode 100644
index 000000000000..c631c082f8f7
--- /dev/null
+++ b/include/asm-x86_64/vsyscall32.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_VSYSCALL32_H
+#define _ASM_VSYSCALL32_H 1
+
+/* Values need to match arch/x86_64/ia32/vsyscall.lds */
+
+#ifdef __ASSEMBLY__
+#define VSYSCALL32_BASE 0xffffe000
+#define VSYSCALL32_SYSEXIT (VSYSCALL32_BASE + 0x410)
+#else
+#define VSYSCALL32_BASE 0xffffe000UL
+#define VSYSCALL32_END (VSYSCALL32_BASE + PAGE_SIZE)
+#define VSYSCALL32_EHDR ((const struct elf32_hdr *) VSYSCALL32_BASE)
+
+#define VSYSCALL32_VSYSCALL ((void *)VSYSCALL32_BASE + 0x400) 
+#define VSYSCALL32_SYSEXIT ((void *)VSYSCALL32_BASE + 0x410)
+#define VSYSCALL32_SIGRETURN ((void __user *)VSYSCALL32_BASE + 0x500) 
+#define VSYSCALL32_RTSIGRETURN ((void __user *)VSYSCALL32_BASE + 0x600) 
+#endif
+
+#endif
diff --git a/include/asm-x86_64/xor.h b/include/asm-x86_64/xor.h
new file mode 100644
index 000000000000..f942fcc21831
--- /dev/null
+++ b/include/asm-x86_64/xor.h
@@ -0,0 +1,354 @@
+/*
+ * include/asm-x86_64/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+/*
+ * Based on
+ * High-speed RAID5 checksumming functions utilizing SSE instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+/*
+ * x86-64 changes / gcc fixes from Andi Kleen. 
+ * Copyright 2002 Andi Kleen, SuSE Labs.
+ *
+ * This hasn't been optimized for the hammer yet, but there are likely
+ * no advantages to be gotten from x86-64 here anyways.
+ */
+
+typedef struct { unsigned long a,b; } __attribute__((aligned(16))) xmm_store_t;
+
+/* Doesn't use gcc to save the XMM registers, because there is no easy way to 
+   tell it to do a clts before the register saving. */
+#define XMMS_SAVE do {				\
+	preempt_disable();			\
+	asm volatile (				\
+		"movq %%cr0,%0		;\n\t"	\
+		"clts			;\n\t"	\
+		"movups %%xmm0,(%1)	;\n\t"	\
+		"movups %%xmm1,0x10(%1)	;\n\t"	\
+		"movups %%xmm2,0x20(%1)	;\n\t"	\
+		"movups %%xmm3,0x30(%1)	;\n\t"	\
+		: "=&r" (cr0)			\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while(0)
+
+#define XMMS_RESTORE do {			\
+	asm volatile (				\
+		"sfence			;\n\t"	\
+		"movups (%1),%%xmm0	;\n\t"	\
+		"movups 0x10(%1),%%xmm1	;\n\t"	\
+		"movups 0x20(%1),%%xmm2	;\n\t"	\
+		"movups 0x30(%1),%%xmm3	;\n\t"	\
+		"movq 	%0,%%cr0	;\n\t"	\
+		:				\
+		: "r" (cr0), "r" (xmm_save)	\
+		: "memory");			\
+	preempt_enable();			\
+} while(0)
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%[p1])		;\n"
+#define LD(x,y)		"       movaps   "OFFS(x)"(%[p1]), %%xmm"#y"	;\n"
+#define ST(x,y)		"       movaps %%xmm"#y",   "OFFS(x)"(%[p1])	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%[p2])		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%[p3])		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%[p4])		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%[p5])		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%[p6])		;\n"
+#define XO1(x,y)	"       xorps   "OFFS(x)"(%[p2]), %%xmm"#y"	;\n"
+#define XO2(x,y)	"       xorps   "OFFS(x)"(%[p3]), %%xmm"#y"	;\n"
+#define XO3(x,y)	"       xorps   "OFFS(x)"(%[p4]), %%xmm"#y"	;\n"
+#define XO4(x,y)	"       xorps   "OFFS(x)"(%[p5]), %%xmm"#y"	;\n"
+#define XO5(x,y)	"       xorps   "OFFS(x)"(%[p6]), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+        unsigned int lines = bytes >> 8;
+	unsigned long cr0;
+	xmm_store_t xmm_save[4];
+
+	XMMS_SAVE;
+
+        asm volatile (
+#undef BLOCK
+#define BLOCK(i) \
+		LD(i,0)					\
+			LD(i+1,1)			\
+		PF1(i)					\
+				PF1(i+2)		\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addq %[inc], %[p1]           ;\n"
+        "       addq %[inc], %[p2]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
+	: [inc] "r" (256UL) 
+        : "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addq %[inc], %[p1]           ;\n"
+        "       addq %[inc], %[p2]          ;\n"
+        "       addq %[inc], %[p3]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [cnt] "+r" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
+	: [inc] "r" (256UL)
+	: "memory"); 
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4]; 
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		PF3(i)					\
+				PF3(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		XO3(i,0)				\
+			XO3(i+1,1)			\
+				XO3(i+2,2)		\
+					XO3(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addq %[inc], %[p1]           ;\n"
+        "       addq %[inc], %[p2]           ;\n"
+        "       addq %[inc], %[p3]           ;\n"
+        "       addq %[inc], %[p4]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
+	: [inc] "r" (256UL)
+        : "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+        unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+        __asm__ __volatile__ (
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i+2)		\
+		LD(i,0)					\
+			LD(i+1,1)			\
+				LD(i+2,2)		\
+					LD(i+3,3)	\
+		PF2(i)					\
+				PF2(i+2)		\
+		XO1(i,0)				\
+			XO1(i+1,1)			\
+				XO1(i+2,2)		\
+					XO1(i+3,3)	\
+		PF3(i)					\
+				PF3(i+2)		\
+		XO2(i,0)				\
+			XO2(i+1,1)			\
+				XO2(i+2,2)		\
+					XO2(i+3,3)	\
+		PF4(i)					\
+				PF4(i+2)		\
+		PF0(i+4)				\
+				PF0(i+6)		\
+		XO3(i,0)				\
+			XO3(i+1,1)			\
+				XO3(i+2,2)		\
+					XO3(i+3,3)	\
+		XO4(i,0)				\
+			XO4(i+1,1)			\
+				XO4(i+2,2)		\
+					XO4(i+3,3)	\
+		ST(i,0)					\
+			ST(i+1,1)			\
+				ST(i+2,2)		\
+					ST(i+3,3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+        " 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+        "       addq %[inc], %[p1]           ;\n"
+        "       addq %[inc], %[p2]           ;\n"
+        "       addq %[inc], %[p3]           ;\n"
+        "       addq %[inc], %[p4]           ;\n"
+        "       addq %[inc], %[p5]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+  	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4), 
+	  [p5] "+r" (p5)
+	: [inc] "r" (256UL)
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_sse = {
+        .name = "generic_sse",
+        .do_2 = xor_sse_2,
+        .do_3 = xor_sse_3,
+        .do_4 = xor_sse_4,
+        .do_5 = xor_sse_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_sse);	\
+	} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h
new file mode 100644
index 000000000000..5f3ab21b339b
--- /dev/null
+++ b/include/linux/8250_pci.h
@@ -0,0 +1,2 @@
+int pci_siig10x_fn(struct pci_dev *dev, int enable);
+int pci_siig20x_fn(struct pci_dev *dev, int enable);
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
new file mode 100644
index 000000000000..af8a1dfa5c32
--- /dev/null
+++ b/include/linux/a.out.h
@@ -0,0 +1,268 @@
+#ifndef __A_OUT_GNU_H__
+#define __A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+  M__OLDSUN2 = M_OLDSUN2,
+#else
+  M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+  M__68010 = M_68010,
+#else
+  M_68010 = 1,
+#endif
+#if defined (M_68020)
+  M__68020 = M_68020,
+#else
+  M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+  M__SPARC = M_SPARC,
+#else
+  M_SPARC = 3,
+#endif
+  /* skip a bunch so we don't run into any of sun's numbers */
+  M_386 = 100,
+  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
+  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+	((exec).a_info = ((magic) & 0xffff) \
+	 | (((int)(type) & 0xff) << 16) \
+	 | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+	((exec).a_info = \
+	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+	((exec).a_info = \
+	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable.  */
+#define OMAGIC 0407
+/* Code indicating pure executable.  */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable.  */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text. 
+   The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file.  */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
+			&& N_MAGIC(x) != NMAGIC		\
+  			&& N_MAGIC(x) != ZMAGIC \
+		        && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded.  */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+   Note that it is up to you to define SEGMENT_SIZE
+   on machines not listed here.  */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef	sony
+#define	SEGMENT_SIZE	0x2000
+#endif	/* Sony.  */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#include <asm/page.h>
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE	1024
+#else
+#ifndef SEGMENT_SIZE
+#define SEGMENT_SIZE	PAGE_SIZE
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) (((x) + SEGMENT_SIZE - 1) & ~(SEGMENT_SIZE - 1))
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded.  */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+  union {
+    char *n_name;
+    struct nlist *n_next;
+    long n_strx;
+  } n_un;
+  unsigned char n_type;
+  char n_other;
+  short n_desc;
+  unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED.  */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+   an indirect reference to another symbol.  The other symbol
+   appears as an undefined reference, immediately following this symbol.
+
+   Indirection is asymmetrical.  The other symbol's value will be used
+   to satisfy requests for the indirect symbol, but not vice versa.
+   If the other symbol does not have a definition, libraries will
+   be searched to find a definition.  */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   element's value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+   The text-relocation section of the file is a vector of these structures,
+   all of which apply to the text section.
+   Likewise, the data-relocation section applies to the data section.  */
+
+struct relocation_info
+{
+  /* Address (within segment) to be relocated.  */
+  int r_address;
+  /* The meaning of r_symbolnum depends on r_extern.  */
+  unsigned int r_symbolnum:24;
+  /* Nonzero means value is a pc-relative offset
+     and it should be relocated for changes in its own address
+     as well as for changes in the symbol or section specified.  */
+  unsigned int r_pcrel:1;
+  /* Length (as exponent of 2) of the field to be relocated.
+     Thus, a value of 2 indicates 1<<2 bytes.  */
+  unsigned int r_length:2;
+  /* 1 => relocate with value of symbol.
+          r_symbolnum is the index of the symbol
+	  in file's the symbol table.
+     0 => relocate with the address of a segment.
+          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+	  (the N_EXT bit may be set also, but signifies nothing).  */
+  unsigned int r_extern:1;
+  /* Four bits that aren't used, but when writing an object file
+     it is desirable to clear them.  */
+#ifdef NS32K
+  unsigned r_bsr:1;
+  unsigned r_disp:1;
+  unsigned r_pad:2;
+#else
+  unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED.  */
+
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/ac97_codec.h b/include/linux/ac97_codec.h
new file mode 100644
index 000000000000..c35833824e11
--- /dev/null
+++ b/include/linux/ac97_codec.h
@@ -0,0 +1,374 @@
+#ifndef _AC97_CODEC_H_
+#define _AC97_CODEC_H_
+
+#include <linux/types.h>
+#include <linux/soundcard.h>
+
+/* AC97 1.0 */
+#define  AC97_RESET               0x0000      //
+#define  AC97_MASTER_VOL_STEREO   0x0002      // Line Out
+#define  AC97_HEADPHONE_VOL       0x0004      // 
+#define  AC97_MASTER_VOL_MONO     0x0006      // TAD Output
+#define  AC97_MASTER_TONE         0x0008      //
+#define  AC97_PCBEEP_VOL          0x000a      // none
+#define  AC97_PHONE_VOL           0x000c      // TAD Input (mono)
+#define  AC97_MIC_VOL             0x000e      // MIC Input (mono)
+#define  AC97_LINEIN_VOL          0x0010      // Line Input (stereo)
+#define  AC97_CD_VOL              0x0012      // CD Input (stereo)
+#define  AC97_VIDEO_VOL           0x0014      // none
+#define  AC97_AUX_VOL             0x0016      // Aux Input (stereo)
+#define  AC97_PCMOUT_VOL          0x0018      // Wave Output (stereo)
+#define  AC97_RECORD_SELECT       0x001a      //
+#define  AC97_RECORD_GAIN         0x001c
+#define  AC97_RECORD_GAIN_MIC     0x001e
+#define  AC97_GENERAL_PURPOSE     0x0020
+#define  AC97_3D_CONTROL          0x0022
+#define  AC97_MODEM_RATE          0x0024
+#define  AC97_POWER_CONTROL       0x0026
+
+/* AC'97 2.0 */
+#define AC97_EXTENDED_ID          0x0028       /* Extended Audio ID */
+#define AC97_EXTENDED_STATUS      0x002A       /* Extended Audio Status */
+#define AC97_PCM_FRONT_DAC_RATE   0x002C       /* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE    0x002E       /* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE     0x0030       /* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE      0x0032       /* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE     0x0034       /* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER    0x0036       /* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER      0x0038       /* Surround (Rear) Master Volume */
+#define AC97_RESERVED_3A          0x003A       /* Reserved in AC '97 < 2.2 */
+
+/* AC'97 2.2 */
+#define AC97_SPDIF_CONTROL        0x003A       /* S/PDIF Control */
+
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MODEM_ID    0x003C
+#define AC97_EXTEND_MODEM_STAT    0x003E
+#define AC97_LINE1_RATE           0x0040
+#define AC97_LINE2_RATE           0x0042
+#define AC97_HANDSET_RATE         0x0044
+#define AC97_LINE1_LEVEL          0x0046
+#define AC97_LINE2_LEVEL          0x0048
+#define AC97_HANDSET_LEVEL        0x004A
+#define AC97_GPIO_CONFIG          0x004C
+#define AC97_GPIO_POLARITY        0x004E
+#define AC97_GPIO_STICKY          0x0050
+#define AC97_GPIO_WAKE_UP         0x0052
+#define AC97_GPIO_STATUS          0x0054
+#define AC97_MISC_MODEM_STAT      0x0056
+#define AC97_RESERVED_58          0x0058
+
+/* registers 0x005a - 0x007a are vendor reserved */
+
+#define AC97_VENDOR_ID1           0x007c
+#define AC97_VENDOR_ID2           0x007e
+
+/* volume control bit defines */
+#define AC97_MUTE                 0x8000
+#define AC97_MICBOOST             0x0040
+#define AC97_LEFTVOL              0x3f00
+#define AC97_RIGHTVOL             0x003f
+
+/* record mux defines */
+#define AC97_RECMUX_MIC           0x0000
+#define AC97_RECMUX_CD            0x0101
+#define AC97_RECMUX_VIDEO         0x0202
+#define AC97_RECMUX_AUX           0x0303
+#define AC97_RECMUX_LINE          0x0404
+#define AC97_RECMUX_STEREO_MIX    0x0505
+#define AC97_RECMUX_MONO_MIX      0x0606
+#define AC97_RECMUX_PHONE         0x0707
+
+/* general purpose register bit defines */
+#define AC97_GP_LPBK              0x0080       /* Loopback mode */
+#define AC97_GP_MS                0x0100       /* Mic Select 0=Mic1, 1=Mic2 */
+#define AC97_GP_MIX               0x0200       /* Mono output select 0=Mix, 1=Mic */
+#define AC97_GP_RLBK              0x0400       /* Remote Loopback - Modem line codec */
+#define AC97_GP_LLBK              0x0800       /* Local Loopback - Modem Line codec */
+#define AC97_GP_LD                0x1000       /* Loudness 1=on */
+#define AC97_GP_3D                0x2000       /* 3D Enhancement 1=on */
+#define AC97_GP_ST                0x4000       /* Stereo Enhancement 1=on */
+#define AC97_GP_POP               0x8000       /* Pcm Out Path, 0=pre 3D, 1=post 3D */
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA               0x0001       /* Variable bit rate enable bit */
+#define AC97_EA_DRA               0x0002       /* Double-rate audio enable bit */
+#define AC97_EA_SPDIF             0x0004       /* S/PDIF Enable bit */
+#define AC97_EA_VRM               0x0008       /* Variable bit rate for MIC enable bit */
+#define AC97_EA_CDAC              0x0040       /* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC              0x0040       /* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC              0x0080       /* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC              0x0100       /* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV              0x0400       /* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI               0x0800       /* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ               0x1000       /* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK               0x2000       /* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL               0x4000       /* Turns the MIC ADC off */
+#define AC97_EA_SLOT_MASK         0xffcf       /* Mask for slot assignment bits */
+#define AC97_EA_SPSA_3_4          0x0000       /* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8          0x0010       /* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9          0x0020       /* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11        0x0030       /* Slot assigned to 10 & 11 */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO               0x0001       /* Professional status */
+#define AC97_SC_NAUDIO            0x0002       /* Non audio stream */
+#define AC97_SC_COPY              0x0004       /* Copyright status */
+#define AC97_SC_PRE               0x0008       /* Preemphasis status */
+#define AC97_SC_CC_MASK           0x07f0       /* Category Code mask */
+#define AC97_SC_L                 0x0800       /* Generation Level status */
+#define AC97_SC_SPSR_MASK         0xcfff       /* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_44K          0x0000       /* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K          0x2000       /* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K          0x3000       /* Use 32kHz Sample rate */
+#define AC97_SC_DRS               0x4000       /* Double Rate S/PDIF */
+#define AC97_SC_V                 0x8000       /* Validity status */
+
+/* powerdown control and status bit defines */
+
+/* status */
+#define AC97_PWR_MDM              0x0010       /* Modem section ready */
+#define AC97_PWR_REF              0x0008       /* Vref nominal */
+#define AC97_PWR_ANL              0x0004       /* Analog section ready */
+#define AC97_PWR_DAC              0x0002       /* DAC section ready */
+#define AC97_PWR_ADC              0x0001       /* ADC section ready */
+
+/* control */
+#define AC97_PWR_PR0              0x0100       /* ADC and Mux powerdown */
+#define AC97_PWR_PR1              0x0200       /* DAC powerdown */
+#define AC97_PWR_PR2              0x0400       /* Output mixer powerdown (Vref on) */
+#define AC97_PWR_PR3              0x0800       /* Output mixer powerdown (Vref off) */
+#define AC97_PWR_PR4              0x1000       /* AC-link powerdown */
+#define AC97_PWR_PR5              0x2000       /* Internal Clk disable */
+#define AC97_PWR_PR6              0x4000       /* HP amp powerdown */
+#define AC97_PWR_PR7              0x8000       /* Modem off - if supported */
+
+/* extended audio ID register bit defines */
+#define AC97_EXTID_VRA            0x0001
+#define AC97_EXTID_DRA            0x0002
+#define AC97_EXTID_SPDIF          0x0004
+#define AC97_EXTID_VRM            0x0008
+#define AC97_EXTID_DSA0           0x0010
+#define AC97_EXTID_DSA1           0x0020
+#define AC97_EXTID_CDAC           0x0040
+#define AC97_EXTID_SDAC           0x0080
+#define AC97_EXTID_LDAC           0x0100
+#define AC97_EXTID_AMAP           0x0200
+#define AC97_EXTID_REV0           0x0400
+#define AC97_EXTID_REV1           0x0800
+#define AC97_EXTID_ID0            0x4000
+#define AC97_EXTID_ID1            0x8000
+
+/* extended status register bit defines */
+#define AC97_EXTSTAT_VRA          0x0001
+#define AC97_EXTSTAT_DRA          0x0002
+#define AC97_EXTSTAT_SPDIF        0x0004
+#define AC97_EXTSTAT_VRM          0x0008
+#define AC97_EXTSTAT_SPSA0        0x0010
+#define AC97_EXTSTAT_SPSA1        0x0020
+#define AC97_EXTSTAT_CDAC         0x0040
+#define AC97_EXTSTAT_SDAC         0x0080
+#define AC97_EXTSTAT_LDAC         0x0100
+#define AC97_EXTSTAT_MADC         0x0200
+#define AC97_EXTSTAT_SPCV         0x0400
+#define AC97_EXTSTAT_PRI          0x0800
+#define AC97_EXTSTAT_PRJ          0x1000
+#define AC97_EXTSTAT_PRK          0x2000
+#define AC97_EXTSTAT_PRL          0x4000
+
+/* extended audio ID register bit defines */
+#define AC97_EXTID_VRA            0x0001
+#define AC97_EXTID_DRA            0x0002
+#define AC97_EXTID_SPDIF          0x0004
+#define AC97_EXTID_VRM            0x0008
+#define AC97_EXTID_DSA0           0x0010
+#define AC97_EXTID_DSA1           0x0020
+#define AC97_EXTID_CDAC           0x0040
+#define AC97_EXTID_SDAC           0x0080
+#define AC97_EXTID_LDAC           0x0100
+#define AC97_EXTID_AMAP           0x0200
+#define AC97_EXTID_REV0           0x0400
+#define AC97_EXTID_REV1           0x0800
+#define AC97_EXTID_ID0            0x4000
+#define AC97_EXTID_ID1            0x8000
+
+/* extended status register bit defines */
+#define AC97_EXTSTAT_VRA          0x0001
+#define AC97_EXTSTAT_DRA          0x0002
+#define AC97_EXTSTAT_SPDIF        0x0004
+#define AC97_EXTSTAT_VRM          0x0008
+#define AC97_EXTSTAT_SPSA0        0x0010
+#define AC97_EXTSTAT_SPSA1        0x0020
+#define AC97_EXTSTAT_CDAC         0x0040
+#define AC97_EXTSTAT_SDAC         0x0080
+#define AC97_EXTSTAT_LDAC         0x0100
+#define AC97_EXTSTAT_MADC         0x0200
+#define AC97_EXTSTAT_SPCV         0x0400
+#define AC97_EXTSTAT_PRI          0x0800
+#define AC97_EXTSTAT_PRJ          0x1000
+#define AC97_EXTSTAT_PRK          0x2000
+#define AC97_EXTSTAT_PRL          0x4000
+
+/* useful power states */
+#define AC97_PWR_D0               0x0000      /* everything on */
+#define AC97_PWR_D1              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4
+#define AC97_PWR_D2              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
+#define AC97_PWR_D3              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
+#define AC97_PWR_ANLOFF          AC97_PWR_PR2|AC97_PWR_PR3  /* analog section off */
+
+/* Total number of defined registers.  */
+#define AC97_REG_CNT 64
+
+
+/* OSS interface to the ac97s.. */
+#define AC97_STEREO_MASK (SOUND_MASK_VOLUME|SOUND_MASK_PCM|\
+	SOUND_MASK_LINE|SOUND_MASK_CD|\
+	SOUND_MASK_ALTPCM|SOUND_MASK_IGAIN|\
+	SOUND_MASK_LINE1|SOUND_MASK_VIDEO)
+
+#define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \
+	SOUND_MASK_BASS|SOUND_MASK_TREBLE|\
+	SOUND_MASK_SPEAKER|SOUND_MASK_MIC|\
+	SOUND_MASK_PHONEIN|SOUND_MASK_PHONEOUT)
+
+#define AC97_RECORD_MASK (SOUND_MASK_MIC|\
+	SOUND_MASK_CD|SOUND_MASK_IGAIN|SOUND_MASK_VIDEO|\
+	SOUND_MASK_LINE1| SOUND_MASK_LINE|\
+	SOUND_MASK_PHONEIN)
+
+/* original check is not good enough in case FOO is greater than
+ * SOUND_MIXER_NRDEVICES because the supported_mixers has exactly
+ * SOUND_MIXER_NRDEVICES elements.
+ * before matching the given mixer against the bitmask in supported_mixers we
+ * check if mixer number exceeds maximum allowed size which is as mentioned
+ * above SOUND_MIXER_NRDEVICES */
+#define supported_mixer(CODEC,FOO) ((FOO >= 0) && \
+                                    (FOO < SOUND_MIXER_NRDEVICES) && \
+                                    (CODEC)->supported_mixers & (1<<FOO) )
+
+struct ac97_codec {
+	/* Linked list of codecs */
+	struct list_head list;
+
+	/* AC97 controller connected with */
+	void *private_data;
+
+	char *name;
+	int id;
+	int dev_mixer; 
+	int type;
+	u32 model;
+
+	int modem:1;
+
+	struct ac97_ops *codec_ops;
+
+	/* controller specific lower leverl ac97 accessing routines.
+	   must be re-entrant safe */
+	u16  (*codec_read)  (struct ac97_codec *codec, u8 reg);
+	void (*codec_write) (struct ac97_codec *codec, u8 reg, u16 val);
+
+	/* Wait for codec-ready.  Ok to sleep here.  */
+	void  (*codec_wait)  (struct ac97_codec *codec);
+
+	/* callback used by helper drivers for interesting ac97 setups */
+	void  (*codec_unregister) (struct ac97_codec *codec);
+	
+	struct ac97_driver *driver;
+	void *driver_private;	/* Private data for the driver */
+	
+	spinlock_t lock;
+	
+	/* OSS mixer masks */
+	int modcnt;
+	int supported_mixers;
+	int stereo_mixers;
+	int record_sources;
+
+	/* Property flags */
+	int flags;
+
+	int bit_resolution;
+
+	/* OSS mixer interface */
+	int  (*read_mixer) (struct ac97_codec *codec, int oss_channel);
+	void (*write_mixer)(struct ac97_codec *codec, int oss_channel,
+			    unsigned int left, unsigned int right);
+	int  (*recmask_io) (struct ac97_codec *codec, int rw, int mask);
+	int  (*mixer_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
+
+	/* saved OSS mixer states */
+	unsigned int mixer_state[SOUND_MIXER_NRDEVICES];
+
+	/* Software Modem interface */
+	int  (*modem_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
+};
+
+/*
+ *	Operation structures for each known AC97 chip
+ */
+ 
+struct ac97_ops
+{
+	/* Initialise */
+	int (*init)(struct ac97_codec *c);
+	/* Amplifier control */
+	int (*amplifier)(struct ac97_codec *codec, int on);
+	/* Digital mode control */
+	int (*digital)(struct ac97_codec *codec, int slots, int rate, int mode);
+#define AUDIO_DIGITAL		0x8000
+#define AUDIO_PRO		0x4000
+#define AUDIO_DRS		0x2000
+#define AUDIO_CCMASK		0x003F
+	
+#define AC97_DELUDED_MODEM	1	/* Audio codec reports its a modem */
+#define AC97_NO_PCM_VOLUME	2	/* Volume control is missing 	   */
+#define AC97_DEFAULT_POWER_OFF 4 /* Needs warm reset to power up */
+};
+
+extern int ac97_read_proc (char *page_out, char **start, off_t off,
+			   int count, int *eof, void *data);
+extern int ac97_probe_codec(struct ac97_codec *);
+extern unsigned int ac97_set_adc_rate(struct ac97_codec *codec, unsigned int rate);
+extern unsigned int ac97_set_dac_rate(struct ac97_codec *codec, unsigned int rate);
+extern int ac97_save_state(struct ac97_codec *codec);
+extern int ac97_restore_state(struct ac97_codec *codec);
+
+extern struct ac97_codec *ac97_alloc_codec(void);
+extern void ac97_release_codec(struct ac97_codec *codec);
+
+struct ac97_driver {
+	struct list_head list;
+	char *name;
+	u32 codec_id;
+	u32 codec_mask;
+	int (*probe) (struct ac97_codec *codec, struct ac97_driver *driver);
+	void (*remove) (struct ac97_codec *codec, struct ac97_driver *driver);
+};
+
+extern int ac97_register_driver(struct ac97_driver *driver);
+extern void ac97_unregister_driver(struct ac97_driver *driver);
+
+/* quirk types */
+enum {
+	AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
+	AC97_TUNE_NONE = 0,     /* nothing extra to do */
+	AC97_TUNE_HP_ONLY,      /* headphone (true line-out) control as master only */
+	AC97_TUNE_SWAP_HP,      /* swap headphone and master controls */
+	AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
+	AC97_TUNE_AD_SHARING,   /* for AD1985, turn on OMS bit and use headphone */
+	AC97_TUNE_ALC_JACK,     /* for Realtek, enable JACK detection */
+};
+
+struct ac97_quirk {
+	unsigned short vendor;  /* PCI vendor id */
+	unsigned short device;  /* PCI device id */
+	unsigned short mask;    /* device id bit mask, 0 = accept all */
+	const char *name;       /* name shown as info */
+	int type;               /* quirk type above */
+};
+
+struct pci_dev;
+extern int ac97_tune_hardware(struct pci_dev *pdev, struct ac97_quirk *quirk, int override);
+
+#endif /* _AC97_CODEC_H_ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
new file mode 100644
index 000000000000..1993a3691768
--- /dev/null
+++ b/include/linux/acct.h
@@ -0,0 +1,201 @@
+/*
+ *  BSD Process Accounting for Linux - Definitions
+ *
+ *  Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ *  This header file contains the definitions needed to implement
+ *  BSD-style process accounting. The kernel accounting code and all
+ *  user-level programs that try to do something useful with the
+ *  process accounting log must include this file.
+ *
+ *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _LINUX_ACCT_H
+#define _LINUX_ACCT_H
+
+#include <linux/types.h>
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/* 
+ *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ *  exponent and a 13-bit fraction.
+ *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ *  (leading 1 not stored).
+ *  See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16	comp_t;
+typedef __u32	comp2_t;
+
+/*
+ *   accounting file record
+ *
+ *   This structure contains all of the information written out to the
+ *   process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM	16
+
+struct acct
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	/* for binary compatibility back until 2.0 */
+	__u16		ac_uid16;		/* LSB of Real User ID */
+	__u16		ac_gid16;		/* LSB of Real Group ID */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_btime;		/* Process Creation Time */
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_etime;		/* Elapsed Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+	__u16		ac_ahz;			/* AHZ */
+#endif
+	__u32		ac_exitcode;		/* Exitcode */
+	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
+	__u8		ac_etime_hi;		/* Elapsed Time MSB */
+	__u16		ac_etime_lo;		/* Elapsed Time LSB */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+};
+
+struct acct_v3
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_exitcode;		/* Exitcode */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+	__u32		ac_pid;			/* Process ID */
+	__u32		ac_ppid;		/* Parent Process ID */
+	__u32		ac_btime;		/* Process Creation Time */
+#ifdef __KERNEL__
+	__u32		ac_etime;		/* Elapsed Time */
+#else
+	float		ac_etime;		/* Elapsed Time */
+#endif
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+	char		ac_comm[ACCT_COMM];	/* Command Name */
+};
+
+/*
+ *  accounting flags
+ */
+				/* bit set when the process ... */
+#define AFORK		0x01	/* ... executed fork, but did not exec */
+#define ASU		0x02	/* ... used super-user privileges */
+#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
+#define ACORE		0x08	/* ... dumped core */
+#define AXSIG		0x10	/* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_BSD_PROCESS_ACCT
+struct super_block;
+extern void acct_auto_close(struct super_block *sb);
+extern void acct_process(long exitcode);
+extern void acct_update_integrals(struct task_struct *tsk);
+extern void acct_clear_integrals(struct task_struct *tsk);
+#else
+#define acct_auto_close(x)	do { } while (0)
+#define acct_process(x)		do { } while (0)
+#define acct_update_integrals(x)		do { } while (0)
+#define acct_clear_integrals(task)	do { } while (0)
+#endif
+
+/*
+ * ACCT_VERSION numbers as yet defined:
+ * 0: old format (until 2.6.7) with 16 bit uid/gid
+ * 1: extended variant (binary compatible on M68K)
+ * 2: extended variant (binary compatible on everything except M68K)
+ * 3: new binary incompatible format (64 bytes)
+ * 4: new binary incompatible format (128 bytes)
+ * 5: new binary incompatible format (128 bytes, second half)
+ *
+ */
+
+#ifdef CONFIG_BSD_PROCESS_ACCT_V3
+#define ACCT_VERSION	3
+#define AHZ		100
+typedef struct acct_v3 acct_t;
+#else
+#ifdef CONFIG_M68K
+#define ACCT_VERSION	1
+#else
+#define ACCT_VERSION	2
+#endif
+#define AHZ		(USER_HZ)
+typedef struct acct acct_t;
+#endif
+
+#else
+#define ACCT_VERSION	2
+#define AHZ		(HZ)
+#endif	/* __KERNEL */
+
+#ifdef __KERNEL__
+/*
+ * Yet another set of HZ to *HZ helper functions.
+ * See <linux/times.h> for the original.
+ */
+
+static inline u32 jiffies_to_AHZ(unsigned long x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / AHZ)) == 0
+	return x / (HZ / USER_HZ);
+#else
+        u64 tmp = (u64)x * TICK_NSEC;
+        do_div(tmp, (NSEC_PER_SEC / AHZ));
+        return (long)tmp;
+#endif
+}
+
+static inline u64 nsec_to_AHZ(u64 x)
+{
+#if (NSEC_PER_SEC % AHZ) == 0
+	do_div(x, (NSEC_PER_SEC / AHZ));
+#elif (AHZ % 512) == 0
+	x *= AHZ/512;
+	do_div(x, (NSEC_PER_SEC / 512));
+#else
+	/*
+         * max relative error 5.7e-8 (1.8s per year) for AHZ <= 1024,
+         * overflow after 64.99 years.
+         * exact for AHZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
+         */
+	x *= 9;
+	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (AHZ/2))
+	                          / AHZ));
+#endif
+	return x;
+}
+
+#endif  /* __KERNEL */
+
+#endif	/* _LINUX_ACCT_H */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
new file mode 100644
index 000000000000..aefe6d051ace
--- /dev/null
+++ b/include/linux/acpi.h
@@ -0,0 +1,536 @@
+/*
+ * acpi.h - ACPI Interface
+ *
+ * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _LINUX_ACPI_H
+#define _LINUX_ACPI_H
+
+#ifndef _LINUX
+#define _LINUX
+#endif
+
+#include <linux/list.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <asm/acpi.h>
+
+
+#ifdef CONFIG_ACPI_BOOT
+
+enum acpi_irq_model_id {
+	ACPI_IRQ_MODEL_PIC = 0,
+	ACPI_IRQ_MODEL_IOAPIC,
+	ACPI_IRQ_MODEL_IOSAPIC,
+	ACPI_IRQ_MODEL_COUNT
+};
+
+extern enum acpi_irq_model_id	acpi_irq_model;
+
+
+/* Root System Description Pointer (RSDP) */
+
+struct acpi_table_rsdp {
+	char			signature[8];
+	u8			checksum;
+	char			oem_id[6];
+	u8			revision;
+	u32			rsdt_address;
+} __attribute__ ((packed));
+
+struct acpi20_table_rsdp {
+	char			signature[8];
+	u8			checksum;
+	char			oem_id[6];
+	u8			revision;
+	u32			rsdt_address;
+	u32			length;
+	u64			xsdt_address;
+	u8			ext_checksum;
+	u8			reserved[3];
+} __attribute__ ((packed));
+
+typedef struct {
+	u8			type;
+	u8			length;
+} __attribute__ ((packed)) acpi_table_entry_header;
+
+/* Root System Description Table (RSDT) */
+
+struct acpi_table_rsdt {
+	struct acpi_table_header header;
+	u32			entry[8];
+} __attribute__ ((packed));
+
+/* Extended System Description Table (XSDT) */
+
+struct acpi_table_xsdt {
+	struct acpi_table_header header;
+	u64			entry[1];
+} __attribute__ ((packed));
+
+/* Fixed ACPI Description Table (FADT) */
+
+struct acpi_table_fadt {
+	struct acpi_table_header header;
+	u32 facs_addr;
+	u32 dsdt_addr;
+	/* ... */
+} __attribute__ ((packed));
+
+/* Multiple APIC Description Table (MADT) */
+
+struct acpi_table_madt {
+	struct acpi_table_header header;
+	u32			lapic_address;
+	struct {
+		u32			pcat_compat:1;
+		u32			reserved:31;
+	}			flags;
+} __attribute__ ((packed));
+
+enum acpi_madt_entry_id {
+	ACPI_MADT_LAPIC = 0,
+	ACPI_MADT_IOAPIC,
+	ACPI_MADT_INT_SRC_OVR,
+	ACPI_MADT_NMI_SRC,
+	ACPI_MADT_LAPIC_NMI,
+	ACPI_MADT_LAPIC_ADDR_OVR,
+	ACPI_MADT_IOSAPIC,
+	ACPI_MADT_LSAPIC,
+	ACPI_MADT_PLAT_INT_SRC,
+	ACPI_MADT_ENTRY_COUNT
+};
+
+typedef struct {
+	u16			polarity:2;
+	u16			trigger:2;
+	u16			reserved:12;
+} __attribute__ ((packed)) acpi_interrupt_flags;
+
+struct acpi_table_lapic {
+	acpi_table_entry_header	header;
+	u8			acpi_id;
+	u8			id;
+	struct {
+		u32			enabled:1;
+		u32			reserved:31;
+	}			flags;
+} __attribute__ ((packed));
+
+struct acpi_table_ioapic {
+	acpi_table_entry_header	header;
+	u8			id;
+	u8			reserved;
+	u32			address;
+	u32			global_irq_base;
+} __attribute__ ((packed));
+
+struct acpi_table_int_src_ovr {
+	acpi_table_entry_header	header;
+	u8			bus;
+	u8			bus_irq;
+	u32			global_irq;
+	acpi_interrupt_flags	flags;
+} __attribute__ ((packed));
+
+struct acpi_table_nmi_src {
+	acpi_table_entry_header	header;
+	acpi_interrupt_flags	flags;
+	u32			global_irq;
+} __attribute__ ((packed));
+
+struct acpi_table_lapic_nmi {
+	acpi_table_entry_header	header;
+	u8			acpi_id;
+	acpi_interrupt_flags	flags;
+	u8			lint;
+} __attribute__ ((packed));
+
+struct acpi_table_lapic_addr_ovr {
+	acpi_table_entry_header	header;
+	u8			reserved[2];
+	u64			address;
+} __attribute__ ((packed));
+
+struct acpi_table_iosapic {
+	acpi_table_entry_header	header;
+	u8			id;
+	u8			reserved;
+	u32			global_irq_base;
+	u64			address;
+} __attribute__ ((packed));
+
+struct acpi_table_lsapic {
+	acpi_table_entry_header	header;
+	u8			acpi_id;
+	u8			id;
+	u8			eid;
+	u8			reserved[3];
+	struct {
+		u32			enabled:1;
+		u32			reserved:31;
+	}			flags;
+} __attribute__ ((packed));
+
+struct acpi_table_plat_int_src {
+	acpi_table_entry_header	header;
+	acpi_interrupt_flags	flags;
+	u8			type;	/* See acpi_interrupt_type */
+	u8			id;
+	u8			eid;
+	u8			iosapic_vector;
+	u32			global_irq;
+	u32			reserved;
+} __attribute__ ((packed));
+
+enum acpi_interrupt_id {
+	ACPI_INTERRUPT_PMI	= 1,
+	ACPI_INTERRUPT_INIT,
+	ACPI_INTERRUPT_CPEI,
+	ACPI_INTERRUPT_COUNT
+};
+
+#define	ACPI_SPACE_MEM		0
+
+struct acpi_gen_regaddr {
+	u8  space_id;
+	u8  bit_width;
+	u8  bit_offset;
+	u8  resv;
+	u32 addrl;
+	u32 addrh;
+} __attribute__ ((packed));
+
+struct acpi_table_hpet {
+	struct acpi_table_header header;
+	u32 id;
+	struct acpi_gen_regaddr addr;
+	u8 number;
+	u16 min_tick;
+	u8 page_protect;
+} __attribute__ ((packed));
+
+/*
+ * Simple Boot Flags
+ * http://www.microsoft.com/whdc/hwdev/resources/specs/simp_bios.mspx
+ */
+struct acpi_table_sbf
+{
+	u8 sbf_signature[4];
+	u32 sbf_len;
+	u8 sbf_revision;
+	u8 sbf_csum;
+	u8 sbf_oemid[6];
+	u8 sbf_oemtable[8];
+	u8 sbf_revdata[4];
+	u8 sbf_creator[4];
+	u8 sbf_crearev[4];
+	u8 sbf_cmos;
+	u8 sbf_spare[3];
+} __attribute__ ((packed));
+
+/*
+ * System Resource Affinity Table (SRAT)
+ * http://www.microsoft.com/whdc/hwdev/platform/proc/SRAT.mspx
+ */
+
+struct acpi_table_srat {
+	struct acpi_table_header header;
+	u32			table_revision;
+	u64			reserved;
+} __attribute__ ((packed));
+
+enum acpi_srat_entry_id {
+	ACPI_SRAT_PROCESSOR_AFFINITY = 0,
+	ACPI_SRAT_MEMORY_AFFINITY,
+	ACPI_SRAT_ENTRY_COUNT
+};
+
+struct acpi_table_processor_affinity {
+	acpi_table_entry_header	header;
+	u8			proximity_domain;
+	u8			apic_id;
+	struct {
+		u32			enabled:1;
+		u32			reserved:31;
+	}			flags;
+	u8			lsapic_eid;
+	u8			reserved[7];
+} __attribute__ ((packed));
+
+struct acpi_table_memory_affinity {
+	acpi_table_entry_header	header;
+	u8			proximity_domain;
+	u8			reserved1[5];
+	u32			base_addr_lo;
+	u32			base_addr_hi;
+	u32			length_lo;
+	u32			length_hi;
+	u32			memory_type;	/* See acpi_address_range_id */
+	struct {
+		u32			enabled:1;
+		u32			hot_pluggable:1;
+		u32			reserved:30;
+	}			flags;
+	u64			reserved2;
+} __attribute__ ((packed));
+
+enum acpi_address_range_id {
+	ACPI_ADDRESS_RANGE_MEMORY = 1,
+	ACPI_ADDRESS_RANGE_RESERVED = 2,
+	ACPI_ADDRESS_RANGE_ACPI = 3,
+	ACPI_ADDRESS_RANGE_NVS	= 4,
+	ACPI_ADDRESS_RANGE_COUNT
+};
+
+/*
+ * System Locality Information Table (SLIT)
+ *   see http://devresource.hp.com/devresource/docs/techpapers/ia64/slit.pdf
+ */
+
+struct acpi_table_slit {
+	struct acpi_table_header header;
+	u64			localities;
+	u8			entry[1];	/* real size = localities^2 */
+} __attribute__ ((packed));
+
+/* Smart Battery Description Table (SBST) */
+
+struct acpi_table_sbst {
+	struct acpi_table_header header;
+	u32			warning;	/* Warn user */
+	u32			low;		/* Critical sleep */
+	u32			critical;	/* Critical shutdown */
+} __attribute__ ((packed));
+
+/* Embedded Controller Boot Resources Table (ECDT) */
+
+struct acpi_table_ecdt {
+	struct acpi_table_header 	header;
+	struct acpi_generic_address	ec_control;
+	struct acpi_generic_address	ec_data;
+	u32				uid;
+	u8				gpe_bit;
+	char				ec_id[0];
+} __attribute__ ((packed));
+
+/* PCI MMCONFIG */
+
+struct acpi_table_mcfg {
+	struct acpi_table_header	header;
+	u8				reserved[8];
+	u32				base_address;
+	u32				base_reserved;
+} __attribute__ ((packed));
+
+/* Table Handlers */
+
+enum acpi_table_id {
+	ACPI_TABLE_UNKNOWN = 0,
+	ACPI_APIC,
+	ACPI_BOOT,
+	ACPI_DBGP,
+	ACPI_DSDT,
+	ACPI_ECDT,
+	ACPI_ETDT,
+	ACPI_FADT,
+	ACPI_FACS,
+	ACPI_OEMX,
+	ACPI_PSDT,
+	ACPI_SBST,
+	ACPI_SLIT,
+	ACPI_SPCR,
+	ACPI_SRAT,
+	ACPI_SSDT,
+	ACPI_SPMI,
+	ACPI_HPET,
+	ACPI_MCFG,
+	ACPI_TABLE_COUNT
+};
+
+typedef int (*acpi_table_handler) (unsigned long phys_addr, unsigned long size);
+
+extern acpi_table_handler acpi_table_ops[ACPI_TABLE_COUNT];
+
+typedef int (*acpi_madt_entry_handler) (acpi_table_entry_header *header, const unsigned long end);
+
+char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
+unsigned long acpi_find_rsdp (void);
+int acpi_boot_init (void);
+int acpi_boot_table_init (void);
+int acpi_numa_init (void);
+
+int acpi_table_init (void);
+int acpi_table_parse (enum acpi_table_id id, acpi_table_handler handler);
+int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header);
+int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
+void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr);
+void acpi_table_print_madt_entry (acpi_table_entry_header *madt);
+void acpi_table_print_srat_entry (acpi_table_entry_header *srat);
+
+/* the following four functions are architecture-dependent */
+void acpi_numa_slit_init (struct acpi_table_slit *slit);
+void acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa);
+void acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma);
+void acpi_numa_arch_fixup(void);
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/* Arch dependent functions for cpu hotplug support */
+int acpi_map_lsapic(acpi_handle handle, int *pcpu);
+int acpi_unmap_lsapic(int cpu);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+extern int acpi_mp_config;
+
+extern u32 pci_mmcfg_base_addr;
+
+extern int sbf_port ;
+
+#else	/*!CONFIG_ACPI_BOOT*/
+
+#define acpi_mp_config	0
+
+static inline int acpi_boot_init(void)
+{
+	return 0;
+}
+
+static inline int acpi_boot_table_init(void)
+{
+	return 0;
+}
+
+#endif 	/*!CONFIG_ACPI_BOOT*/
+
+unsigned int acpi_register_gsi (u32 gsi, int edge_level, int active_high_low);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+/*
+ * This function undoes the effect of one call to acpi_register_gsi().
+ * If this matches the last registration, any IRQ resources for gsi
+ * are freed.
+ */
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+void acpi_unregister_gsi (u32 gsi);
+#endif
+
+#ifdef CONFIG_ACPI_PCI
+
+struct acpi_prt_entry {
+	struct list_head	node;
+	struct acpi_pci_id	id;
+	u8			pin;
+	struct {
+		acpi_handle		handle;
+		u32			index;
+	}			link;
+	u32			irq;
+};
+
+struct acpi_prt_list {
+	int			count;
+	struct list_head	entries;
+};
+
+struct pci_dev;
+
+int acpi_pci_irq_enable (struct pci_dev *dev);
+void acpi_penalize_isa_irq(int irq);
+
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+void acpi_pci_irq_disable (struct pci_dev *dev);
+#endif
+
+struct acpi_pci_driver {
+	struct acpi_pci_driver *next;
+	int (*add)(acpi_handle handle);
+	void (*remove)(acpi_handle handle);
+};
+
+int acpi_pci_register_driver(struct acpi_pci_driver *driver);
+void acpi_pci_unregister_driver(struct acpi_pci_driver *driver);
+
+#endif /*CONFIG_ACPI_PCI*/
+
+#ifdef CONFIG_ACPI_EC
+
+extern int ec_read(u8 addr, u8 *val);
+extern int ec_write(u8 addr, u8 val);
+
+#endif /*CONFIG_ACPI_EC*/
+
+#ifdef CONFIG_ACPI_INTERPRETER
+
+extern int acpi_blacklisted(void);
+extern void acpi_bios_year(char *s);
+
+#else /*!CONFIG_ACPI_INTERPRETER*/
+
+static inline int acpi_blacklisted(void)
+{
+	return 0;
+}
+
+#endif /*!CONFIG_ACPI_INTERPRETER*/
+
+#define	ACPI_CSTATE_LIMIT_DEFINED	/* for driver builds */
+#ifdef	CONFIG_ACPI
+
+/*
+ * Set highest legal C-state
+ * 0: C0 okay, but not C1
+ * 1: C1 okay, but not C2
+ * 2: C2 okay, but not C3 etc.
+ */
+
+extern unsigned int max_cstate;
+
+static inline unsigned int acpi_get_cstate_limit(void)
+{
+	return max_cstate;
+}
+static inline void acpi_set_cstate_limit(unsigned int new_limit)
+{
+	max_cstate = new_limit;
+	return;
+}
+#else
+static inline unsigned int acpi_get_cstate_limit(void) { return 0; }
+static inline void acpi_set_cstate_limit(unsigned int new_limit) { return; }
+#endif
+
+#ifdef CONFIG_ACPI_NUMA
+int acpi_get_pxm(acpi_handle handle);
+#else
+static inline int acpi_get_pxm(acpi_handle handle)
+{
+	return 0;
+}
+#endif
+
+extern int pnpacpi_disabled;
+
+#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/adb.h b/include/linux/adb.h
new file mode 100644
index 000000000000..e9fdc63483c7
--- /dev/null
+++ b/include/linux/adb.h
@@ -0,0 +1,104 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef __ADB_H
+#define __ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+#define ADB_RET_OK	0
+#define ADB_RET_TIMEOUT	3
+
+/* The kind of ADB request. The controller may emulate some
+   or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+#define PMU_PACKET	6
+#define ADB_QUERY	7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO	1
+
+#ifdef __KERNEL__
+
+struct adb_request {
+	unsigned char data[32];
+	int nbytes;
+	unsigned char reply[32];
+	int reply_len;
+	unsigned char reply_expected;
+	unsigned char sent;
+	unsigned char complete;
+	void (*done)(struct adb_request *);
+	void *arg;
+	struct adb_request *next;
+};
+
+struct adb_ids {
+	int nids;
+	unsigned char id[16];
+};
+
+/* Structure which encapsulates a low-level ADB driver */
+
+struct adb_driver {
+	char name[16];
+	int (*probe)(void);
+	int (*init)(void);
+	int (*send_request)(struct adb_request *req, int sync);
+	int (*autopoll)(int devs);
+	void (*poll)(void);
+	int (*reset_bus)(void);
+};
+
+/* Values for adb_request flags */
+#define ADBREQ_REPLY	1	/* expect reply */
+#define ADBREQ_SYNC	2	/* poll until done */
+#define ADBREQ_NOSEND	4	/* build the request, but don't send it */
+
+/* Messages sent thru the client_list notifier. You should NOT stop
+   the operation, at least not with this version */
+enum adb_message {
+    ADB_MSG_POWERDOWN,	/* Currently called before sleep only */
+    ADB_MSG_PRE_RESET,	/* Called before resetting the bus */
+    ADB_MSG_POST_RESET	/* Called after resetting the bus (re-do init & register) */
+};
+extern struct adb_driver *adb_controller;
+extern struct notifier_block *adb_client_list;
+
+int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
+		int flags, int nbytes, ...);
+int adb_register(int default_id,int handler_id,struct adb_ids *ids,
+		 void (*handler)(unsigned char *, int, struct pt_regs *, int));
+int adb_unregister(int index);
+void adb_poll(void);
+void adb_input(unsigned char *, int, struct pt_regs *, int);
+int adb_reset_bus(void);
+
+int adb_try_handler_change(int address, int new_id);
+int adb_get_infos(int address, int *original_address, int *handler_id);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
new file mode 100644
index 000000000000..4a5d50c2bdbf
--- /dev/null
+++ b/include/linux/adfs_fs.h
@@ -0,0 +1,76 @@
+#ifndef _ADFS_FS_H
+#define _ADFS_FS_H
+
+#include <linux/types.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+    __u8  log2secsize;
+    __u8  secspertrack;
+    __u8  heads;
+    __u8  density;
+    __u8  idlen;
+    __u8  log2bpmb;
+    __u8  skew;
+    __u8  bootoption;
+    __u8  lowsector;
+    __u8  nzones;
+    __le16 zone_spare;
+    __le32 root;
+    __le32 disc_size;
+    __le16 disc_id;
+    __u8  disc_name[10];
+    __le32 disc_type;
+    __le32 disc_size_high;
+    __u8  log2sharesize:4;
+    __u8  unused40:4;
+    __u8  big_flag:1;
+    __u8  unused41:1;
+    __u8  nzones_high;
+    __le32 format_version;
+    __le32 root_size;
+    __u8  unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD		(0xc00)
+#define ADFS_DR_OFFSET		(0x1c0)
+#define ADFS_DR_SIZE		 60
+#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
+#define ADFS_SUPER_MAGIC	 0xadf5
+
+#ifdef __KERNEL__
+#include <linux/adfs_fs_i.h>
+#include <linux/adfs_fs_sb.h>
+/*
+ * Calculate the boot block checksum on an ADFS drive.  Note that this will
+ * appear to be correct if the sector contains all zeros, so also check that
+ * the disk size is non-zero!!!
+ */
+static inline int adfs_checkbblk(unsigned char *ptr)
+{
+	unsigned int result = 0;
+	unsigned char *p = ptr + 511;
+
+	do {
+	        result = (result & 0xff) + (result >> 8);
+        	result = result + *--p;
+	} while (p != ptr);
+
+	return (result & 0xff) != ptr[511];
+}
+
+static inline struct adfs_sb_info *ADFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct adfs_inode_info *ADFS_I(struct inode *inode)
+{
+	return container_of(inode, struct adfs_inode_info, vfs_inode);
+}
+
+#endif
+
+#endif
diff --git a/include/linux/adfs_fs_i.h b/include/linux/adfs_fs_i.h
new file mode 100644
index 000000000000..cb543034e54f
--- /dev/null
+++ b/include/linux/adfs_fs_i.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/linux/adfs_fs_i.h
+ *
+ * Copyright (C) 1997 Russell King
+ */
+
+#ifndef _ADFS_FS_I
+#define _ADFS_FS_I
+
+/*
+ * adfs file system inode data in memory
+ */
+struct adfs_inode_info {
+	loff_t		mmu_private;
+	unsigned long	parent_id;	/* object id of parent		*/
+	__u32		loadaddr;	/* RISC OS load address		*/
+	__u32		execaddr;	/* RISC OS exec address		*/
+	unsigned int	filetype;	/* RISC OS file type		*/
+	unsigned int	attr;		/* RISC OS permissions		*/
+	unsigned int	stamped:1;	/* RISC OS file has date/time	*/
+	struct inode vfs_inode;
+};
+
+#endif
diff --git a/include/linux/adfs_fs_sb.h b/include/linux/adfs_fs_sb.h
new file mode 100644
index 000000000000..d9bf05c02ccc
--- /dev/null
+++ b/include/linux/adfs_fs_sb.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/linux/adfs_fs_sb.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ */
+
+#ifndef _ADFS_FS_SB
+#define _ADFS_FS_SB
+
+/*
+ * Forward-declare this
+ */
+struct adfs_discmap;
+struct adfs_dir_ops;
+
+/*
+ * ADFS file system superblock data in memory
+ */
+struct adfs_sb_info {
+	struct adfs_discmap *s_map;	/* bh list containing map		 */
+	struct adfs_dir_ops *s_dir;	/* directory operations			 */
+
+	uid_t		s_uid;		/* owner uid				 */
+	gid_t		s_gid;		/* owner gid				 */
+	umode_t		s_owner_mask;	/* ADFS owner perm -> unix perm		 */
+	umode_t		s_other_mask;	/* ADFS other perm -> unix perm		 */
+
+	__u32		s_ids_per_zone;	/* max. no ids in one zone		 */
+	__u32		s_idlen;	/* length of ID in map			 */
+	__u32		s_map_size;	/* sector size of a map			 */
+	unsigned long	s_size;		/* total size (in blocks) of this fs	 */
+	signed int	s_map2blk;	/* shift left by this for map->sector	 */
+	unsigned int	s_log2sharesize;/* log2 share size			 */
+	__le32		s_version;	/* disc format version			 */
+	unsigned int	s_namelen;	/* maximum number of characters in name	 */
+};
+
+#endif
diff --git a/include/linux/affs_fs.h b/include/linux/affs_fs.h
new file mode 100644
index 000000000000..c57b5ee87d55
--- /dev/null
+++ b/include/linux/affs_fs.h
@@ -0,0 +1,7 @@
+#ifndef _AFFS_FS_H
+#define _AFFS_FS_H
+/*
+ * The affs filesystem constants/structures
+ */
+#define AFFS_SUPER_MAGIC 0xadff
+#endif
diff --git a/include/linux/affs_hardblocks.h b/include/linux/affs_hardblocks.h
new file mode 100644
index 000000000000..3fb869939d82
--- /dev/null
+++ b/include/linux/affs_hardblocks.h
@@ -0,0 +1,66 @@
+#ifndef	AFFS_HARDBLOCKS_H
+#define	AFFS_HARDBLOCKS_H
+
+/* Just the needed definitions for the RDB of an Amiga HD. */
+
+struct RigidDiskBlock {
+	u32	rdb_ID;
+	__be32	rdb_SummedLongs;
+	s32	rdb_ChkSum;
+	u32	rdb_HostID;
+	__be32	rdb_BlockBytes;
+	u32	rdb_Flags;
+	u32	rdb_BadBlockList;
+	__be32	rdb_PartitionList;
+	u32	rdb_FileSysHeaderList;
+	u32	rdb_DriveInit;
+	u32	rdb_Reserved1[6];
+	u32	rdb_Cylinders;
+	u32	rdb_Sectors;
+	u32	rdb_Heads;
+	u32	rdb_Interleave;
+	u32	rdb_Park;
+	u32	rdb_Reserved2[3];
+	u32	rdb_WritePreComp;
+	u32	rdb_ReducedWrite;
+	u32	rdb_StepRate;
+	u32	rdb_Reserved3[5];
+	u32	rdb_RDBBlocksLo;
+	u32	rdb_RDBBlocksHi;
+	u32	rdb_LoCylinder;
+	u32	rdb_HiCylinder;
+	u32	rdb_CylBlocks;
+	u32	rdb_AutoParkSeconds;
+	u32	rdb_HighRDSKBlock;
+	u32	rdb_Reserved4;
+	char	rdb_DiskVendor[8];
+	char	rdb_DiskProduct[16];
+	char	rdb_DiskRevision[4];
+	char	rdb_ControllerVendor[8];
+	char	rdb_ControllerProduct[16];
+	char	rdb_ControllerRevision[4];
+	u32	rdb_Reserved5[10];
+};
+
+#define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
+
+struct PartitionBlock {
+	__be32	pb_ID;
+	__be32	pb_SummedLongs;
+	s32	pb_ChkSum;
+	u32	pb_HostID;
+	__be32	pb_Next;
+	u32	pb_Flags;
+	u32	pb_Reserved1[2];
+	u32	pb_DevFlags;
+	u8	pb_DriveName[32];
+	u32	pb_Reserved2[15];
+	__be32	pb_Environment[17];
+	u32	pb_EReserved[15];
+};
+
+#define	IDNAME_PARTITION	0x50415254	/* "PART" */
+
+#define RDB_ALLOCATION_LIMIT	16
+
+#endif	/* AFFS_HARDBLOCKS_H */
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
new file mode 100644
index 000000000000..a5c8bb5d80ba
--- /dev/null
+++ b/include/linux/agp_backend.h
@@ -0,0 +1,109 @@
+/*
+ * AGPGART backend specific includes. Not for userspace consumption.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ * Copyright (C) 2002-2003 Dave Jones
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _AGP_BACKEND_H
+#define _AGP_BACKEND_H 1
+
+#ifdef __KERNEL__
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+enum chipset_type {
+	NOT_SUPPORTED,
+	SUPPORTED,
+};
+
+struct agp_version {
+	u16 major;
+	u16 minor;
+};
+
+struct agp_kern_info {
+	struct agp_version version;
+	struct pci_dev *device;
+	enum chipset_type chipset;
+	unsigned long mode;
+	unsigned long aper_base;
+	size_t aper_size;
+	int max_memory;		/* In pages */
+	int current_memory;
+	int cant_use_aperture;
+	unsigned long page_mask;
+	struct vm_operations_struct *vm_ops;
+};
+
+/*
+ * The agp_memory structure has information about the block of agp memory
+ * allocated.  A caller may manipulate the next and prev pointers to link
+ * each allocated item into a list.  These pointers are ignored by the backend.
+ * Everything else should never be written to, but the caller may read any of
+ * the items to determine the status of this block of agp memory.
+ */
+
+struct agp_bridge_data;
+
+struct agp_memory {
+	struct agp_memory *next;
+	struct agp_memory *prev;
+	struct agp_bridge_data *bridge;
+	unsigned long *memory;
+	size_t page_count;
+	int key;
+	int num_scratch_pages;
+	off_t pg_start;
+	u32 type;
+	u32 physical;
+	u8 is_bound;
+	u8 is_flushed;
+};
+
+#define AGP_NORMAL_MEMORY 0
+
+extern struct agp_bridge_data *agp_bridge;
+extern struct list_head agp_bridges;
+
+extern struct agp_bridge_data *(*agp_find_bridge)(struct pci_dev *);
+
+extern void agp_free_memory(struct agp_memory *);
+extern struct agp_memory *agp_allocate_memory(struct agp_bridge_data *, size_t, u32);
+extern int agp_copy_info(struct agp_bridge_data *, struct agp_kern_info *);
+extern int agp_bind_memory(struct agp_memory *, off_t);
+extern int agp_unbind_memory(struct agp_memory *);
+extern void agp_enable(struct agp_bridge_data *, u32);
+extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
+extern void agp_backend_release(struct agp_bridge_data *);
+
+#endif				/* __KERNEL__ */
+#endif				/* _AGP_BACKEND_H */
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
new file mode 100644
index 000000000000..17a17c55a17f
--- /dev/null
+++ b/include/linux/agpgart.h
@@ -0,0 +1,214 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _AGP_H
+#define _AGP_H 1
+
+#include <linux/agp_backend.h>
+
+#define AGPIOC_BASE       'A'
+#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+
+#define AGP_DEVICE      "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+#include <asm/types.h>
+
+struct agp_version {
+	__u16 major;
+	__u16 minor;
+};
+
+typedef struct _agp_info {
+	struct agp_version version;	/* version of the driver        */
+	__u32 bridge_id;	/* bridge vendor/device         */
+	__u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+} agp_info;
+
+typedef struct _agp_setup {
+	__u32 agp_mode;		/* mode info of bridge          */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+	off_t pg_start;		/* starting page to populate    */
+	size_t pg_count;	/* number of pages              */
+	int prot;		/* prot flags for mmap          */
+} agp_segment;
+
+typedef struct _agp_region {
+	pid_t pid;		/* pid of process               */
+	size_t seg_count;	/* number of segments           */
+	struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+	int key;		/* tag of allocation            */
+	size_t pg_count;	/* number of pages              */
+	__u32 type;		/* 0 == normal, other devspec   */
+   	__u32 physical;         /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+} agp_allocate;
+
+typedef struct _agp_bind {
+	int key;		/* tag of allocation            */
+	off_t pg_start;		/* starting page to populate    */
+} agp_bind;
+
+typedef struct _agp_unbind {
+	int key;		/* tag of allocation            */
+	__u32 priority;		/* priority for paging out      */
+} agp_unbind;
+
+#else				/* __KERNEL__ */
+
+#define AGPGART_MINOR 175
+
+struct agp_info {
+	struct agp_version version;	/* version of the driver        */
+	u32 bridge_id;		/* bridge vendor/device         */
+	u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+};
+
+struct agp_setup {
+	u32 agp_mode;		/* mode info of bridge          */
+};
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+struct agp_segment {
+	off_t pg_start;		/* starting page to populate    */
+	size_t pg_count;	/* number of pages              */
+	int prot;		/* prot flags for mmap          */
+};
+
+struct agp_segment_priv {
+	off_t pg_start;
+	size_t pg_count;
+	pgprot_t prot;
+};
+
+struct agp_region {
+	pid_t pid;		/* pid of process               */
+	size_t seg_count;	/* number of segments           */
+	struct agp_segment *seg_list;
+};
+
+struct agp_allocate {
+	int key;		/* tag of allocation            */
+	size_t pg_count;	/* number of pages              */
+	u32 type;		/* 0 == normal, other devspec   */
+	u32 physical;           /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+};
+
+struct agp_bind {
+	int key;		/* tag of allocation            */
+	off_t pg_start;		/* starting page to populate    */
+};
+
+struct agp_unbind {
+	int key;		/* tag of allocation            */
+	u32 priority;		/* priority for paging out      */
+};
+
+struct agp_client {
+	struct agp_client *next;
+	struct agp_client *prev;
+	pid_t pid;
+	int num_segments;
+	struct agp_segment_priv **segments;
+};
+
+struct agp_controller {
+	struct agp_controller *next;
+	struct agp_controller *prev;
+	pid_t pid;
+	int num_clients;
+	struct agp_memory *pool;
+	struct agp_client *clients;
+};
+
+#define AGP_FF_ALLOW_CLIENT		0
+#define AGP_FF_ALLOW_CONTROLLER 	1
+#define AGP_FF_IS_CLIENT		2
+#define AGP_FF_IS_CONTROLLER		3
+#define AGP_FF_IS_VALID 		4
+
+struct agp_file_private {
+	struct agp_file_private *next;
+	struct agp_file_private *prev;
+	pid_t my_pid;
+	long access_flags;	/* long req'd for set_bit --RR */
+};
+
+struct agp_front_data {
+	struct semaphore agp_mutex;
+	struct agp_controller *current_controller;
+	struct agp_controller *controllers;
+	struct agp_file_private *file_priv_list;
+	u8 used_by_controller;
+	u8 backend_acquired;
+};
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _AGP_H */
diff --git a/include/linux/aio.h b/include/linux/aio.h
new file mode 100644
index 000000000000..a4d5af907f90
--- /dev/null
+++ b/include/linux/aio.h
@@ -0,0 +1,201 @@
+#ifndef __LINUX__AIO_H
+#define __LINUX__AIO_H
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/aio_abi.h>
+
+#include <asm/atomic.h>
+
+#define AIO_MAXSEGS		4
+#define AIO_KIOGRP_NR_ATOMIC	8
+
+struct kioctx;
+
+/* Notes on cancelling a kiocb:
+ *	If a kiocb is cancelled, aio_complete may return 0 to indicate 
+ *	that cancel has not yet disposed of the kiocb.  All cancel 
+ *	operations *must* call aio_put_req to dispose of the kiocb 
+ *	to guard against races with the completion code.
+ */
+#define KIOCB_C_CANCELLED	0x01
+#define KIOCB_C_COMPLETE	0x02
+
+#define KIOCB_SYNC_KEY		(~0U)
+
+/* ki_flags bits */
+#define KIF_LOCKED		0
+#define KIF_KICKED		1
+#define KIF_CANCELLED		2
+
+#define kiocbTryLock(iocb)	test_and_set_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbTryKick(iocb)	test_and_set_bit(KIF_KICKED, &(iocb)->ki_flags)
+
+#define kiocbSetLocked(iocb)	set_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbSetKicked(iocb)	set_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbSetCancelled(iocb)	set_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+#define kiocbClearLocked(iocb)	clear_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbClearKicked(iocb)	clear_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbClearCancelled(iocb)	clear_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+#define kiocbIsLocked(iocb)	test_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbIsKicked(iocb)	test_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbIsCancelled(iocb)	test_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+struct kiocb {
+	struct list_head	ki_run_list;
+	long			ki_flags;
+	int			ki_users;
+	unsigned		ki_key;		/* id of this request */
+
+	struct file		*ki_filp;
+	struct kioctx		*ki_ctx;	/* may be NULL for sync ops */
+	int			(*ki_cancel)(struct kiocb *, struct io_event *);
+	ssize_t			(*ki_retry)(struct kiocb *);
+	void			(*ki_dtor)(struct kiocb *);
+
+	struct list_head	ki_list;	/* the aio core uses this
+						 * for cancellation */
+
+	union {
+		void __user		*user;
+		struct task_struct	*tsk;
+	} ki_obj;
+	__u64			ki_user_data;	/* user's data for completion */
+	loff_t			ki_pos;
+	/* State that we remember to be able to restart/retry  */
+	unsigned short		ki_opcode;
+	size_t			ki_nbytes; 	/* copy of iocb->aio_nbytes */
+	char 			__user *ki_buf;	/* remaining iocb->aio_buf */
+	size_t			ki_left; 	/* remaining bytes */
+	wait_queue_t		ki_wait;
+	long			ki_retried; 	/* just for testing */
+	long			ki_kicked; 	/* just for testing */
+	long			ki_queued; 	/* just for testing */
+
+	void			*private;
+};
+
+#define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
+#define init_sync_kiocb(x, filp)			\
+	do {						\
+		struct task_struct *tsk = current;	\
+		(x)->ki_flags = 0;			\
+		(x)->ki_users = 1;			\
+		(x)->ki_key = KIOCB_SYNC_KEY;		\
+		(x)->ki_filp = (filp);			\
+		(x)->ki_ctx = &tsk->active_mm->default_kioctx;	\
+		(x)->ki_cancel = NULL;			\
+		(x)->ki_dtor = NULL;			\
+		(x)->ki_obj.tsk = tsk;			\
+		(x)->ki_user_data = 0;                  \
+		init_wait((&(x)->ki_wait));             \
+	} while (0)
+
+#define AIO_RING_MAGIC			0xa10a10a1
+#define AIO_RING_COMPAT_FEATURES	1
+#define AIO_RING_INCOMPAT_FEATURES	0
+struct aio_ring {
+	unsigned	id;	/* kernel internal index number */
+	unsigned	nr;	/* number of io_events */
+	unsigned	head;
+	unsigned	tail;
+
+	unsigned	magic;
+	unsigned	compat_features;
+	unsigned	incompat_features;
+	unsigned	header_length;	/* size of aio_ring */
+
+
+	struct io_event		io_events[0];
+}; /* 128 bytes + ring size */
+
+#define aio_ring_avail(info, ring)	(((ring)->head + (info)->nr - 1 - (ring)->tail) % (info)->nr)
+
+#define AIO_RING_PAGES	8
+struct aio_ring_info {
+	unsigned long		mmap_base;
+	unsigned long		mmap_size;
+
+	struct page		**ring_pages;
+	spinlock_t		ring_lock;
+	long			nr_pages;
+
+	unsigned		nr, tail;
+
+	struct page		*internal_pages[AIO_RING_PAGES];
+};
+
+struct kioctx {
+	atomic_t		users;
+	int			dead;
+	struct mm_struct	*mm;
+
+	/* This needs improving */
+	unsigned long		user_id;
+	struct kioctx		*next;
+
+	wait_queue_head_t	wait;
+
+	spinlock_t		ctx_lock;
+
+	int			reqs_active;
+	struct list_head	active_reqs;	/* used for cancellation */
+	struct list_head	run_list;	/* used for kicked reqs */
+
+	unsigned		max_reqs;
+
+	struct aio_ring_info	ring_info;
+
+	struct work_struct	wq;
+};
+
+/* prototypes */
+extern unsigned aio_max_size;
+
+extern ssize_t FASTCALL(wait_on_sync_kiocb(struct kiocb *iocb));
+extern int FASTCALL(aio_put_req(struct kiocb *iocb));
+extern void FASTCALL(kick_iocb(struct kiocb *iocb));
+extern int FASTCALL(aio_complete(struct kiocb *iocb, long res, long res2));
+extern void FASTCALL(__put_ioctx(struct kioctx *ctx));
+struct mm_struct;
+extern void FASTCALL(exit_aio(struct mm_struct *mm));
+extern struct kioctx *lookup_ioctx(unsigned long ctx_id);
+extern int FASTCALL(io_submit_one(struct kioctx *ctx,
+			struct iocb __user *user_iocb, struct iocb *iocb));
+
+/* semi private, but used by the 32bit emulations: */
+struct kioctx *lookup_ioctx(unsigned long ctx_id);
+int FASTCALL(io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
+				  struct iocb *iocb));
+
+#define get_ioctx(kioctx)	do { if (unlikely(atomic_read(&(kioctx)->users) <= 0)) BUG(); atomic_inc(&(kioctx)->users); } while (0)
+#define put_ioctx(kioctx)	do { if (unlikely(atomic_dec_and_test(&(kioctx)->users))) __put_ioctx(kioctx); else if (unlikely(atomic_read(&(kioctx)->users) < 0)) BUG(); } while (0)
+
+#define in_aio() !is_sync_wait(current->io_wait)
+/* may be used for debugging */
+#define warn_if_async()							\
+do {									\
+	if (in_aio()) {							\
+		printk(KERN_ERR "%s(%s:%d) called in async context!\n",	\
+			__FUNCTION__, __FILE__, __LINE__);		\
+		dump_stack();						\
+	}								\
+} while (0)
+
+#define io_wait_to_kiocb(wait) container_of(wait, struct kiocb, ki_wait)
+#define is_retried_kiocb(iocb) ((iocb)->ki_retried > 1)
+
+#include <linux/aio_abi.h>
+
+static inline struct kiocb *list_kiocb(struct list_head *h)
+{
+	return list_entry(h, struct kiocb, ki_list);
+}
+
+/* for sysctl: */
+extern atomic_t aio_nr;
+extern unsigned aio_max_nr;
+
+#endif /* __LINUX__AIO_H */
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
new file mode 100644
index 000000000000..30fdcc89d142
--- /dev/null
+++ b/include/linux/aio_abi.h
@@ -0,0 +1,92 @@
+/* linux/aio_abi.h
+ *
+ * Copyright 2000,2001,2002 Red Hat.
+ *
+ * Written by Benjamin LaHaise <bcrl@kvack.org>
+ *
+ * Distribute under the terms of the GPLv2 (see ../../COPYING) or under 
+ * the following terms.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, provided that the above copyright
+ * notice appears in all copies.  This software is provided without any
+ * warranty, express or implied.  Red Hat makes no representations about
+ * the suitability of this software for any purpose.
+ *
+ * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+ * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
+ * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
+ * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
+ * ENHANCEMENTS, OR MODIFICATIONS.
+ */
+#ifndef __LINUX__AIO_ABI_H
+#define __LINUX__AIO_ABI_H
+
+#include <asm/byteorder.h>
+
+typedef unsigned long	aio_context_t;
+
+enum {
+	IOCB_CMD_PREAD = 0,
+	IOCB_CMD_PWRITE = 1,
+	IOCB_CMD_FSYNC = 2,
+	IOCB_CMD_FDSYNC = 3,
+	/* These two are experimental.
+	 * IOCB_CMD_PREADX = 4,
+	 * IOCB_CMD_POLL = 5,
+	 */
+	IOCB_CMD_NOOP = 6,
+};
+
+/* read() from /dev/aio returns these structures. */
+struct io_event {
+	__u64		data;		/* the data field from the iocb */
+	__u64		obj;		/* what iocb this event came from */
+	__s64		res;		/* result code for this event */
+	__s64		res2;		/* secondary result */
+};
+
+#if defined(__LITTLE_ENDIAN)
+#define PADDED(x,y)	x, y
+#elif defined(__BIG_ENDIAN)
+#define PADDED(x,y)	y, x
+#else
+#error edit for your odd byteorder.
+#endif
+
+/*
+ * we always use a 64bit off_t when communicating
+ * with userland.  its up to libraries to do the
+ * proper padding and aio_error abstraction
+ */
+
+struct iocb {
+	/* these are internal to the kernel/libc. */
+	__u64	aio_data;	/* data to be returned in event's data */
+	__u32	PADDED(aio_key, aio_reserved1);
+				/* the kernel sets aio_key to the req # */
+
+	/* common fields */
+	__u16	aio_lio_opcode;	/* see IOCB_CMD_ above */
+	__s16	aio_reqprio;
+	__u32	aio_fildes;
+
+	__u64	aio_buf;
+	__u64	aio_nbytes;
+	__s64	aio_offset;
+
+	/* extra parameters */
+	__u64	aio_reserved2;	/* TODO: use this for a (struct sigevent *) */
+	__u64	aio_reserved3;
+}; /* 64 bytes */
+
+#undef IFBIG
+#undef IFLITTLE
+
+#endif /* __LINUX__AIO_ABI_H */
+
diff --git a/include/linux/amifd.h b/include/linux/amifd.h
new file mode 100644
index 000000000000..346993268b45
--- /dev/null
+++ b/include/linux/amifd.h
@@ -0,0 +1,62 @@
+#ifndef _AMIFD_H
+#define _AMIFD_H
+
+/* Definitions for the Amiga floppy driver */
+
+#include <linux/fd.h>
+
+#define FD_MAX_UNITS    4	/* Max. Number of drives */
+#define FLOPPY_MAX_SECTORS	22	/* Max. Number of sectors per track */
+
+#ifndef ASSEMBLER
+
+struct fd_data_type {
+    char *name;			/* description of data type */
+    int sects;			/* sectors per track */
+#ifdef __STDC__
+    int (*read_fkt)(int);
+    void (*write_fkt)(int);
+#else
+    int (*read_fkt)();		/* read whole track */
+    void (*write_fkt)();		/* write whole track */
+#endif
+};
+
+/*
+** Floppy type descriptions
+*/
+
+struct fd_drive_type {
+    unsigned long code;		/* code returned from drive */
+    char *name;			/* description of drive */
+    unsigned int tracks;	/* number of tracks */
+    unsigned int heads;		/* number of heads */
+    unsigned int read_size;	/* raw read size for one track */
+    unsigned int write_size;	/* raw write size for one track */
+    unsigned int sect_mult;	/* sectors and gap multiplier (HD = 2) */
+    unsigned int precomp1;	/* start track for precomp 1 */
+    unsigned int precomp2;	/* start track for precomp 2 */
+    unsigned int step_delay;	/* time (in ms) for delay after step */
+    unsigned int settle_time;	/* time to settle after dir change */
+    unsigned int side_time;	/* time needed to change sides */
+};
+
+struct amiga_floppy_struct {
+    struct fd_drive_type *type;	/* type of floppy for this unit */
+    struct fd_data_type *dtype;	/* type of floppy for this unit */
+    int track;			/* current track (-1 == unknown) */
+    unsigned char *trackbuf;    /* current track (kmaloc()'d */
+
+    int blocks;			/* total # blocks on disk */
+
+    int changed;		/* true when not known */
+    int disk;			/* disk in drive (-1 == unknown) */
+    int motor;			/* true when motor is at speed */
+    int busy;			/* true when drive is active */
+    int dirty;			/* true when trackbuf is not on disk */
+    int status;			/* current error code for unit */
+    struct gendisk *gendisk;
+};
+#endif
+
+#endif
diff --git a/include/linux/amifdreg.h b/include/linux/amifdreg.h
new file mode 100644
index 000000000000..76188bf48d3b
--- /dev/null
+++ b/include/linux/amifdreg.h
@@ -0,0 +1,81 @@
+#ifndef _LINUX_AMIFDREG_H
+#define _LINUX_AMIFDREG_H
+
+/*
+** CIAAPRA bits (read only)
+*/
+
+#define DSKRDY      (0x1<<5)        /* disk ready when low */
+#define DSKTRACK0   (0x1<<4)        /* head at track zero when low */
+#define DSKPROT     (0x1<<3)        /* disk protected when low */
+#define DSKCHANGE   (0x1<<2)        /* low when disk removed */
+
+/*
+** CIAAPRB bits (read/write)
+*/
+
+#define DSKMOTOR    (0x1<<7)        /* motor on when low */
+#define DSKSEL3     (0x1<<6)        /* select drive 3 when low */
+#define DSKSEL2     (0x1<<5)        /* select drive 2 when low */
+#define DSKSEL1     (0x1<<4)        /* select drive 1 when low */
+#define DSKSEL0     (0x1<<3)        /* select drive 0 when low */
+#define DSKSIDE     (0x1<<2)        /* side selection: 0 = upper, 1 = lower */
+#define DSKDIREC    (0x1<<1)        /* step direction: 0=in, 1=out (to trk 0) */
+#define DSKSTEP     (0x1)           /* pulse low to step head 1 track */
+
+/*
+** DSKBYTR bits (read only)
+*/
+
+#define DSKBYT      (1<<15)         /* register contains valid byte when set */
+#define DMAON       (1<<14)         /* disk DMA enabled */
+#define DISKWRITE   (1<<13)         /* disk write bit in DSKLEN enabled */
+#define WORDEQUAL   (1<<12)         /* DSKSYNC register match when true */
+/* bits 7-0 are data */
+
+/*
+** ADKCON/ADKCONR bits
+*/
+
+#ifndef SETCLR
+#define ADK_SETCLR      (1<<15)     /* control bit */
+#endif
+#define ADK_PRECOMP1    (1<<14)     /* precompensation selection */
+#define ADK_PRECOMP0    (1<<13)     /* 00=none, 01=140ns, 10=280ns, 11=500ns */
+#define ADK_MFMPREC     (1<<12)     /* 0=GCR precomp., 1=MFM precomp. */
+#define ADK_WORDSYNC    (1<<10)     /* enable DSKSYNC auto DMA */
+#define ADK_MSBSYNC     (1<<9)      /* when 1, enable sync on MSbit (for GCR) */
+#define ADK_FAST        (1<<8)      /* bit cell: 0=2us (GCR), 1=1us (MFM) */
+ 
+/*
+** DSKLEN bits
+*/
+
+#define DSKLEN_DMAEN    (1<<15)
+#define DSKLEN_WRITE    (1<<14)
+
+/*
+** INTENA/INTREQ bits
+*/
+
+#define DSKINDEX    (0x1<<4)        /* DSKINDEX bit */
+
+/*
+** Misc
+*/
+ 
+#define MFM_SYNC    0x4489          /* standard MFM sync value */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+
+#endif /* _LINUX_AMIFDREG_H */
diff --git a/include/linux/amigaffs.h b/include/linux/amigaffs.h
new file mode 100644
index 000000000000..43b41c06aa37
--- /dev/null
+++ b/include/linux/amigaffs.h
@@ -0,0 +1,144 @@
+#ifndef AMIGAFFS_H
+#define AMIGAFFS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define FS_OFS		0x444F5300
+#define FS_FFS		0x444F5301
+#define FS_INTLOFS	0x444F5302
+#define FS_INTLFFS	0x444F5303
+#define FS_DCOFS	0x444F5304
+#define FS_DCFFS	0x444F5305
+#define MUFS_FS		0x6d754653   /* 'muFS' */
+#define MUFS_OFS	0x6d754600   /* 'muF\0' */
+#define MUFS_FFS	0x6d754601   /* 'muF\1' */
+#define MUFS_INTLOFS	0x6d754602   /* 'muF\2' */
+#define MUFS_INTLFFS	0x6d754603   /* 'muF\3' */
+#define MUFS_DCOFS	0x6d754604   /* 'muF\4' */
+#define MUFS_DCFFS	0x6d754605   /* 'muF\5' */
+
+#define T_SHORT		2
+#define T_LIST		16
+#define T_DATA		8
+
+#define ST_LINKFILE	-4
+#define ST_FILE		-3
+#define ST_ROOT		1
+#define ST_USERDIR	2
+#define ST_SOFTLINK	3
+#define ST_LINKDIR	4
+
+#define AFFS_ROOT_BMAPS		25
+
+struct affs_date {
+	__be32 days;
+	__be32 mins;
+	__be32 ticks;
+};
+
+struct affs_short_date {
+	__be16 days;
+	__be16 mins;
+	__be16 ticks;
+};
+
+struct affs_root_head {
+	__be32 ptype;
+	__be32 spare1;
+	__be32 spare2;
+	__be32 hash_size;
+	__be32 spare3;
+	__be32 checksum;
+	__be32 hashtable[1];
+};
+
+struct affs_root_tail {
+	__be32 bm_flag;
+	__be32 bm_blk[AFFS_ROOT_BMAPS];
+	__be32 bm_ext;
+	struct affs_date root_change;
+	u8 disk_name[32];
+	__be32 spare1;
+	__be32 spare2;
+	struct affs_date disk_change;
+	struct affs_date disk_create;
+	__be32 spare3;
+	__be32 spare4;
+	__be32 dcache;
+	__be32 stype;
+};
+
+struct affs_head {
+	__be32 ptype;
+	__be32 key;
+	__be32 block_count;
+	__be32 spare1;
+	__be32 first_data;
+	__be32 checksum;
+	__be32 table[1];
+};
+
+struct affs_tail {
+	__be32 spare1;
+	__be16 uid;
+	__be16 gid;
+	__be32 protect;
+	__be32 size;
+	u8 comment[92];
+	struct affs_date change;
+	u8 name[32];
+	__be32 spare2;
+	__be32 original;
+	__be32 link_chain;
+	__be32 spare[5];
+	__be32 hash_chain;
+	__be32 parent;
+	__be32 extension;
+	__be32 stype;
+};
+
+struct slink_front
+{
+	__be32 ptype;
+	__be32 key;
+	__be32 spare1[3];
+	__be32 checksum;
+	u8 symname[1];	/* depends on block size */
+};
+
+struct affs_data_head
+{
+	__be32 ptype;
+	__be32 key;
+	__be32 sequence;
+	__be32 size;
+	__be32 next;
+	__be32 checksum;
+	u8 data[1];	/* depends on block size */
+};
+
+/* Permission bits */
+
+#define FIBF_OTR_READ		0x8000
+#define FIBF_OTR_WRITE		0x4000
+#define FIBF_OTR_EXECUTE	0x2000
+#define FIBF_OTR_DELETE		0x1000
+#define FIBF_GRP_READ		0x0800
+#define FIBF_GRP_WRITE		0x0400
+#define FIBF_GRP_EXECUTE	0x0200
+#define FIBF_GRP_DELETE		0x0100
+
+#define FIBF_HIDDEN		0x0080
+#define FIBF_SCRIPT		0x0040
+#define FIBF_PURE		0x0020		/* no use under linux */
+#define FIBF_ARCHIVED		0x0010		/* never set, always cleared on write */
+#define FIBF_NOREAD		0x0008		/* 0 means allowed */
+#define FIBF_NOWRITE		0x0004		/* 0 means allowed */
+#define FIBF_NOEXECUTE		0x0002		/* 0 means allowed, ignored under linux */
+#define FIBF_NODELETE		0x0001		/* 0 means allowed */
+
+#define FIBF_OWNER		0x000F		/* Bits pertaining to owner */
+#define FIBF_MASK		0xEE0E		/* Bits modified by Linux */
+
+#endif
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
new file mode 100644
index 000000000000..290aef326812
--- /dev/null
+++ b/include/linux/apm_bios.h
@@ -0,0 +1,218 @@
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
+
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+typedef unsigned short	apm_event_t;
+typedef unsigned short	apm_eventinfo_t;
+
+#ifdef __KERNEL__
+
+#define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
+#define APM_CS_16	(APM_CS + 8)
+#define APM_DS		(APM_CS_16 + 8)
+
+struct apm_bios_info {
+	unsigned short	version;
+	unsigned short	cseg;
+	unsigned long	offset;
+	unsigned short	cseg_16;
+	unsigned short	dseg;
+	unsigned short	flags;
+	unsigned short	cseg_len;
+	unsigned short	cseg_16_len;
+	unsigned short	dseg_len;
+};
+
+/* Results of APM Installation Check */
+#define APM_16_BIT_SUPPORT	0x0001
+#define APM_32_BIT_SUPPORT	0x0002
+#define APM_IDLE_SLOWS_CLOCK	0x0004
+#define APM_BIOS_DISABLED      	0x0008
+#define APM_BIOS_DISENGAGED     0x0010
+
+/*
+ * Data for APM that is persistent across module unload/load
+ */
+struct apm_info {
+	struct apm_bios_info	bios;
+	unsigned short		connection_version;
+	int			get_power_status_broken;
+	int			get_power_status_swabinminutes;
+	int			allow_ints;
+	int			forbid_idle;
+	int			realmode_power_off;
+	int			disabled;
+};
+
+/*
+ * The APM function codes
+ */
+#define	APM_FUNC_INST_CHECK	0x5300
+#define	APM_FUNC_REAL_CONN	0x5301
+#define	APM_FUNC_16BIT_CONN	0x5302
+#define	APM_FUNC_32BIT_CONN	0x5303
+#define	APM_FUNC_DISCONN	0x5304
+#define	APM_FUNC_IDLE		0x5305
+#define	APM_FUNC_BUSY		0x5306
+#define	APM_FUNC_SET_STATE	0x5307
+#define	APM_FUNC_ENABLE_PM	0x5308
+#define	APM_FUNC_RESTORE_BIOS	0x5309
+#define	APM_FUNC_GET_STATUS	0x530a
+#define	APM_FUNC_GET_EVENT	0x530b
+#define	APM_FUNC_GET_STATE	0x530c
+#define	APM_FUNC_ENABLE_DEV_PM	0x530d
+#define	APM_FUNC_VERSION	0x530e
+#define	APM_FUNC_ENGAGE_PM	0x530f
+#define	APM_FUNC_GET_CAP	0x5310
+#define	APM_FUNC_RESUME_TIMER	0x5311
+#define	APM_FUNC_RESUME_ON_RING	0x5312
+#define	APM_FUNC_TIMER		0x5313
+
+/*
+ * Function code for APM_FUNC_RESUME_TIMER
+ */
+#define	APM_FUNC_DISABLE_TIMER	0
+#define	APM_FUNC_GET_TIMER	1
+#define	APM_FUNC_SET_TIMER	2
+
+/*
+ * Function code for APM_FUNC_RESUME_ON_RING
+ */
+#define	APM_FUNC_DISABLE_RING	0
+#define	APM_FUNC_ENABLE_RING	1
+#define	APM_FUNC_GET_RING	2
+
+/*
+ * Function code for APM_FUNC_TIMER_STATUS
+ */
+#define	APM_FUNC_TIMER_DISABLE	0
+#define	APM_FUNC_TIMER_ENABLE	1
+#define	APM_FUNC_TIMER_GET	2
+
+/*
+ * in arch/i386/kernel/setup.c
+ */
+extern struct apm_info	apm_info;
+
+#endif	/* __KERNEL__ */
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY		0x0000
+#define APM_STATE_STANDBY	0x0001
+#define APM_STATE_SUSPEND	0x0002
+#define APM_STATE_OFF		0x0003
+#define APM_STATE_BUSY		0x0004
+#define APM_STATE_REJECT	0x0005
+#define APM_STATE_OEM_SYS	0x0020
+#define APM_STATE_OEM_DEV	0x0040
+
+#define APM_STATE_DISABLE	0x0000
+#define APM_STATE_ENABLE	0x0001
+
+#define APM_STATE_DISENGAGE	0x0000
+#define APM_STATE_ENGAGE	0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY		0x0001
+#define APM_SYS_SUSPEND		0x0002
+#define APM_NORMAL_RESUME	0x0003
+#define APM_CRITICAL_RESUME	0x0004
+#define APM_LOW_BATTERY		0x0005
+#define APM_POWER_STATUS_CHANGE	0x0006
+#define APM_UPDATE_TIME		0x0007
+#define APM_CRITICAL_SUSPEND	0x0008
+#define APM_USER_STANDBY	0x0009
+#define APM_USER_SUSPEND	0x000a
+#define APM_STANDBY_RESUME	0x000b
+#define APM_CAPABILITY_CHANGE	0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS		0x00
+#define APM_DISABLED		0x01
+#define APM_CONNECTED		0x02
+#define APM_NOT_CONNECTED	0x03
+#define APM_16_CONNECTED	0x05
+#define APM_16_UNSUPPORTED	0x06
+#define APM_32_CONNECTED	0x07
+#define APM_32_UNSUPPORTED	0x08
+#define APM_BAD_DEVICE		0x09
+#define APM_BAD_PARAM		0x0a
+#define APM_NOT_ENGAGED		0x0b
+#define APM_BAD_FUNCTION	0x0c
+#define APM_RESUME_DISABLED	0x0d
+#define APM_NO_ERROR		0x53
+#define APM_BAD_STATE		0x60
+#define APM_NO_EVENTS		0x80
+#define APM_NOT_PRESENT		0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS		0x0000
+#define APM_DEVICE_ALL		0x0001
+#define APM_DEVICE_DISPLAY	0x0100
+#define APM_DEVICE_STORAGE	0x0200
+#define APM_DEVICE_PARALLEL	0x0300
+#define APM_DEVICE_SERIAL	0x0400
+#define APM_DEVICE_NETWORK	0x0500
+#define APM_DEVICE_PCMCIA	0x0600
+#define APM_DEVICE_BATTERY	0x8000
+#define APM_DEVICE_OEM		0xe000
+#define APM_DEVICE_OLD_ALL	0xffff
+#define APM_DEVICE_CLASS	0x00ff
+#define APM_DEVICE_MASK		0xff00
+
+#ifdef __KERNEL__
+/*
+ * This is the "All Devices" ID communicated to the BIOS
+ */
+#define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
+				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
+#endif
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES	2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY		0x0001
+#define APM_CAP_GLOBAL_SUSPEND		0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
+#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY		_IO('A', 1)
+#define APM_IOC_SUSPEND		_IO('A', 2)
+
+#endif	/* LINUX_APM_H */
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
new file mode 100644
index 000000000000..7198f129e135
--- /dev/null
+++ b/include/linux/arcdevice.h
@@ -0,0 +1,350 @@
+/*
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  NET  is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              Definitions used by the ARCnet driver.
+ *
+ * Authors:     Avery Pennarun and David Woodhouse
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _LINUX_ARCDEVICE_H
+#define _LINUX_ARCDEVICE_H
+
+#include <asm/timex.h>
+#include <linux/if_arcnet.h>
+
+#ifdef __KERNEL__
+
+#ifndef bool
+#define bool int
+#endif
+
+/*
+ * RECON_THRESHOLD is the maximum number of RECON messages to receive
+ * within one minute before printing a "cabling problem" warning. The
+ * default value should be fine.
+ *
+ * After that, a "cabling restored" message will be printed on the next IRQ
+ * if no RECON messages have been received for 10 seconds.
+ *
+ * Do not define RECON_THRESHOLD at all if you want to disable this feature.
+ */
+#define RECON_THRESHOLD 30
+
+
+/*
+ * Define this to the minimum "timeout" value.  If a transmit takes longer
+ * than TX_TIMEOUT jiffies, Linux will abort the TX and retry.  On a large
+ * network, or one with heavy network traffic, this timeout may need to be
+ * increased.  The larger it is, though, the longer it will be between
+ * necessary transmits - don't set this too high.
+ */
+#define TX_TIMEOUT (HZ * 200 / 1000)
+
+
+/* Display warnings about the driver being an ALPHA version. */
+#undef ALPHA_WARNING
+
+
+/*
+ * Debugging bitflags: each option can be enabled individually.
+ * 
+ * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
+ *   actually be available.  GCC will (at least, GCC 2.7.0 will) notice
+ *   lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
+ *   them out.
+ */
+#define D_NORMAL	1	/* important operational info             */
+#define D_EXTRA		2	/* useful, but non-vital information      */
+#define	D_INIT		4	/* show init/probe messages               */
+#define D_INIT_REASONS	8	/* show reasons for discarding probes     */
+#define D_RECON		32	/* print a message whenever token is lost */
+#define D_PROTO		64	/* debug auto-protocol support            */
+/* debug levels below give LOTS of output during normal operation! */
+#define D_DURING	128	/* trace operations (including irq's)     */
+#define D_TX	        256	/* show tx packets                        */
+#define D_RX		512	/* show rx packets                        */
+#define D_SKB		1024	/* show skb's                             */
+#define D_SKB_SIZE	2048	/* show skb sizes			  */
+#define D_TIMING	4096	/* show time needed to copy buffers to card */
+#define D_DEBUG         8192    /* Very detailed debug line for line */
+
+#ifndef ARCNET_DEBUG_MAX
+#define ARCNET_DEBUG_MAX (127)	/* change to ~0 if you want detailed debugging */
+#endif
+
+#ifndef ARCNET_DEBUG
+#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
+#endif
+extern int arcnet_debug;
+
+/* macros to simplify debug checking */
+#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
+#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
+#define BUGMSG(x,msg,args...) \
+	BUGMSG2(x, "%s%6s: " msg, \
+            x==D_NORMAL	? KERN_WARNING \
+            		: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
+	    dev->name , ## args)
+
+/* see how long a function call takes to run, expressed in CPU cycles */
+#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
+	    unsigned long _x, _y; \
+	    _x = get_cycles(); \
+	    call; \
+	    _y = get_cycles(); \
+	    BUGMSG(D_TIMING, \
+	       "%s: %d bytes in %lu cycles == " \
+	       "%lu Kbytes/100Mcycle\n",\
+		   name, bytes, _y - _x, \
+		   100000000 / 1024 * bytes / (_y - _x + 1));\
+	} \
+	else { \
+		    call;\
+	}
+
+
+/*
+ * Time needed to reset the card - in ms (milliseconds).  This works on my
+ * SMC PC100.  I can't find a reference that tells me just how long I
+ * should wait.
+ */
+#define RESETtime (300)
+
+/*
+ * These are the max/min lengths of packet payload, not including the
+ * arc_hardware header, but definitely including the soft header.
+ *
+ * Note: packet sizes 254, 255, 256 are impossible because of the way
+ * ARCnet registers work  That's why RFC1201 defines "exception" packets.
+ * In non-RFC1201 protocols, we have to just tack some extra bytes on the
+ * end.
+ */
+#define MTU	253		/* normal packet max size */
+#define MinTU	257		/* extended packet min size */
+#define XMTU	508		/* extended packet max size */
+
+/* status/interrupt mask bit fields */
+#define TXFREEflag	0x01	/* transmitter available */
+#define TXACKflag       0x02	/* transmitted msg. ackd */
+#define RECONflag       0x04	/* network reconfigured */
+#define TESTflag        0x08	/* test flag */
+#define EXCNAKflag      0x08    /* excesive nak flag */
+#define RESETflag       0x10	/* power-on-reset */
+#define RES1flag        0x20	/* reserved - usually set by jumper */
+#define RES2flag        0x40	/* reserved - usually set by jumper */
+#define NORXflag        0x80	/* receiver inhibited */
+
+/* Flags used for IO-mapped memory operations */
+#define AUTOINCflag     0x40	/* Increase location with each access */
+#define IOMAPflag       0x02	/* (for 90xx) Use IO mapped memory, not mmap */
+#define ENABLE16flag    0x80	/* (for 90xx) Enable 16-bit mode */
+
+/* in the command register, the following bits have these meanings:
+ *                0-2     command
+ *                3-4     page number (for enable rcv/xmt command)
+ *                 7      receive broadcasts
+ */
+#define NOTXcmd         0x01	/* disable transmitter */
+#define NORXcmd         0x02	/* disable receiver */
+#define TXcmd           0x03	/* enable transmitter */
+#define RXcmd           0x04	/* enable receiver */
+#define CONFIGcmd       0x05	/* define configuration */
+#define CFLAGScmd       0x06	/* clear flags */
+#define TESTcmd         0x07	/* load test flags */
+
+/* flags for "clear flags" command */
+#define RESETclear      0x08	/* power-on-reset */
+#define CONFIGclear     0x10	/* system reconfigured */
+
+#define EXCNAKclear     0x0E    /* Clear and acknowledge the excive nak bit */
+
+/* flags for "load test flags" command */
+#define TESTload        0x08	/* test flag (diagnostic) */
+
+/* byte deposited into first address of buffers on reset */
+#define TESTvalue       0321	/* that's octal for 0xD1 :) */
+
+/* for "enable receiver" command */
+#define RXbcasts        0x80	/* receive broadcasts */
+
+/* flags for "define configuration" command */
+#define NORMALconf      0x00	/* 1-249 byte packets */
+#define EXTconf         0x08	/* 250-504 byte packets */
+
+/* card feature flags, set during auto-detection.
+ * (currently only used by com20020pci)
+ */
+#define ARC_IS_5MBIT    1   /* card default speed is 5MBit */
+#define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
+				 but default is 2.5MBit. */
+
+
+/* information needed to define an encapsulation driver */
+struct ArcProto {
+	char suffix;		/* a for RFC1201, e for ether-encap, etc. */
+	int mtu;		/* largest possible packet */
+	int is_ip;              /* This is a ip plugin - not a raw thing */
+
+	void (*rx) (struct net_device * dev, int bufnum,
+		    struct archdr * pkthdr, int length);
+	int (*build_header) (struct sk_buff * skb, struct net_device *dev,
+			     unsigned short ethproto, uint8_t daddr);
+
+	/* these functions return '1' if the skb can now be freed */
+	int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
+			   int bufnum);
+	int (*continue_tx) (struct net_device * dev, int bufnum);
+	int (*ack_tx) (struct net_device * dev, int acked);
+};
+
+extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
+	*arc_bcast_proto, *arc_raw_proto;
+extern struct ArcProto arc_proto_null;
+
+
+/*
+ * "Incoming" is information needed for each address that could be sending
+ * to us.  Mostly for partially-received split packets.
+ */
+struct Incoming {
+	struct sk_buff *skb;	/* packet data buffer             */
+	uint16_t sequence;	/* sequence number of assembly    */
+	uint8_t lastpacket,	/* number of last packet (from 1) */
+		numpackets;	/* number of packets in split     */
+};
+
+
+/* only needed for RFC1201 */
+struct Outgoing {
+	struct ArcProto *proto;	/* protocol driver that owns this:
+				 *   if NULL, no packet is pending.
+				 */
+	struct sk_buff *skb;	/* buffer from upper levels */
+	struct archdr *pkt;	/* a pointer into the skb */
+	uint16_t length,	/* bytes total */
+		dataleft,	/* bytes left */
+		segnum,		/* segment being sent */
+		numsegs;	/* number of segments */
+};
+
+
+struct arcnet_local {
+	struct net_device_stats stats;
+
+	uint8_t config,		/* current value of CONFIG register */
+		timeout,	/* Extended timeout for COM20020 */
+		backplane,	/* Backplane flag for COM20020 */
+		clockp,		/* COM20020 clock divider */
+		clockm,		/* COM20020 clock multiplier flag */
+		setup,		/* Contents of setup1 register */
+		setup2,		/* Contents of setup2 register */
+		intmask;	/* current value of INTMASK register */
+	uint8_t default_proto[256];	/* default encap to use for each host */
+	int	cur_tx,		/* buffer used by current transmit, or -1 */
+		next_tx,	/* buffer where a packet is ready to send */
+		cur_rx;		/* current receive buffer */
+	int	lastload_dest,	/* can last loaded packet be acked? */
+		lasttrans_dest;	/* can last TX'd packet be acked? */
+	int	timed_out;	/* need to process TX timeout and drop packet */
+	unsigned long last_timeout;	/* time of last reported timeout */
+	char *card_name;	/* card ident string */
+	int card_flags;		/* special card features */
+
+
+	/* On preemtive and SMB a lock is needed */
+	spinlock_t lock;
+
+	/*
+	 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
+	 * which can be used for either sending or receiving.  The new dynamic
+	 * buffer management routines use a simple circular queue of available
+	 * buffers, and take them as they're needed.  This way, we simplify
+	 * situations in which we (for example) want to pre-load a transmit
+	 * buffer, or start receiving while we copy a received packet to
+	 * memory.
+	 * 
+	 * The rules: only the interrupt handler is allowed to _add_ buffers to
+	 * the queue; thus, this doesn't require a lock.  Both the interrupt
+	 * handler and the transmit function will want to _remove_ buffers, so
+	 * we need to handle the situation where they try to do it at the same
+	 * time.
+	 * 
+	 * If next_buf == first_free_buf, the queue is empty.  Since there are
+	 * only four possible buffers, the queue should never be full.
+	 */
+	atomic_t buf_lock;
+	int buf_queue[5];
+	int next_buf, first_free_buf;
+
+	/* network "reconfiguration" handling */
+	time_t first_recon,	/* time of "first" RECON message to count */
+		last_recon;	/* time of most recent RECON */
+	int num_recons;		/* number of RECONs between first and last. */
+	bool network_down;	/* do we think the network is down? */
+
+	bool excnak_pending;    /* We just got an excesive nak interrupt */
+
+	struct {
+		uint16_t sequence;	/* sequence number (incs with each packet) */
+		uint16_t aborted_seq;
+
+		struct Incoming incoming[256];	/* one from each address */
+	} rfc1201;
+
+	/* really only used by rfc1201, but we'll pretend it's not */
+	struct Outgoing outgoing;	/* packet currently being sent */
+
+	/* hardware-specific functions */
+	struct {
+		struct module *owner;
+		void (*command) (struct net_device * dev, int cmd);
+		int (*status) (struct net_device * dev);
+		void (*intmask) (struct net_device * dev, int mask);
+		bool (*reset) (struct net_device * dev, bool really_reset);
+		void (*open) (struct net_device * dev);
+		void (*close) (struct net_device * dev);
+
+		void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
+				      void *buf, int count);
+		void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
+					void *buf, int count);
+	} hw;
+
+	void __iomem *mem_start;	/* pointer to ioremap'ed MMIO */
+};
+
+
+#define ARCRESET(x)  (lp->hw.reset(dev, (x)))
+#define ACOMMAND(x)  (lp->hw.command(dev, (x)))
+#define ASTATUS()    (lp->hw.status(dev))
+#define AINTMASK(x)  (lp->hw.intmask(dev, (x)))
+
+
+
+#if ARCNET_DEBUG_MAX & D_SKB
+void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
+#else
+#define arcnet_dump_skb(dev,skb,desc) ;
+#endif
+
+#if (ARCNET_DEBUG_MAX & D_RX) || (ARCNET_DEBUG_MAX & D_TX)
+void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc,
+			int take_arcnet_lock);
+#else
+#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) ;
+#endif
+
+void arcnet_unregister_proto(struct ArcProto *proto);
+irqreturn_t arcnet_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+struct net_device *alloc_arcdev(char *name);
+void arcnet_rx(struct net_device *dev, int bufnum);
+
+#endif				/* __KERNEL__ */
+#endif				/* _LINUX_ARCDEVICE_H */
diff --git a/include/linux/ata.h b/include/linux/ata.h
new file mode 100644
index 000000000000..f178894edd04
--- /dev/null
+++ b/include/linux/ata.h
@@ -0,0 +1,268 @@
+
+/*
+   Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+   Copyright 2003-2004 Jeff Garzik
+
+   The contents of this file are subject to the Open
+   Software License version 1.1 that can be found at
+   http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+   by reference.
+
+   Alternatively, the contents of this file may be used under the terms
+   of the GNU General Public License version 2 (the "GPL") as distributed
+   in the kernel source COPYING file, in which case the provisions of
+   the GPL are applicable instead of the above.  If you wish to allow
+   the use of your version of this file only under the terms of the
+   GPL and not to allow others to use your version of this file under
+   the OSL, indicate your decision by deleting the provisions above and
+   replace them with the notice and other provisions required by the GPL.
+   If you do not delete the provisions above, a recipient may use your
+   version of this file under either the OSL or the GPL.
+
+ */
+
+#ifndef __LINUX_ATA_H__
+#define __LINUX_ATA_H__
+
+#include <linux/types.h>
+
+/* defines only for the constants which don't work well as enums */
+#define ATA_DMA_BOUNDARY	0xffffUL
+#define ATA_DMA_MASK		0xffffffffULL
+
+enum {
+	/* various global constants */
+	ATA_MAX_DEVICES		= 2,	/* per bus/port */
+	ATA_MAX_PRD		= 256,	/* we could make these 256/256 */
+	ATA_SECT_SIZE		= 512,
+
+	ATA_ID_WORDS		= 256,
+	ATA_ID_PROD_OFS		= 27,
+	ATA_ID_FW_REV_OFS	= 23,
+	ATA_ID_SERNO_OFS	= 10,
+	ATA_ID_MAJOR_VER	= 80,
+	ATA_ID_PIO_MODES	= 64,
+	ATA_ID_MWDMA_MODES	= 63,
+	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_PIO4		= (1 << 1),
+
+	ATA_PCI_CTL_OFS		= 2,
+	ATA_SERNO_LEN		= 20,
+	ATA_UDMA0		= (1 << 0),
+	ATA_UDMA1		= ATA_UDMA0 | (1 << 1),
+	ATA_UDMA2		= ATA_UDMA1 | (1 << 2),
+	ATA_UDMA3		= ATA_UDMA2 | (1 << 3),
+	ATA_UDMA4		= ATA_UDMA3 | (1 << 4),
+	ATA_UDMA5		= ATA_UDMA4 | (1 << 5),
+	ATA_UDMA6		= ATA_UDMA5 | (1 << 6),
+	ATA_UDMA7		= ATA_UDMA6 | (1 << 7),
+	/* ATA_UDMA7 is just for completeness... doesn't exist (yet?).  */
+
+	ATA_UDMA_MASK_40C	= ATA_UDMA2,	/* udma0-2 */
+
+	/* DMA-related */
+	ATA_PRD_SZ		= 8,
+	ATA_PRD_TBL_SZ		= (ATA_MAX_PRD * ATA_PRD_SZ),
+	ATA_PRD_EOT		= (1 << 31),	/* end-of-table flag */
+
+	ATA_DMA_TABLE_OFS	= 4,
+	ATA_DMA_STATUS		= 2,
+	ATA_DMA_CMD		= 0,
+	ATA_DMA_WR		= (1 << 3),
+	ATA_DMA_START		= (1 << 0),
+	ATA_DMA_INTR		= (1 << 2),
+	ATA_DMA_ERR		= (1 << 1),
+	ATA_DMA_ACTIVE		= (1 << 0),
+
+	/* bits in ATA command block registers */
+	ATA_HOB			= (1 << 7),	/* LBA48 selector */
+	ATA_NIEN		= (1 << 1),	/* disable-irq flag */
+	ATA_LBA			= (1 << 6),	/* LBA28 selector */
+	ATA_DEV1		= (1 << 4),	/* Select Device 1 (slave) */
+	ATA_DEVICE_OBS		= (1 << 7) | (1 << 5), /* obs bits in dev reg */
+	ATA_DEVCTL_OBS		= (1 << 3),	/* obsolete bit in devctl reg */
+	ATA_BUSY		= (1 << 7),	/* BSY status bit */
+	ATA_DRDY		= (1 << 6),	/* device ready */
+	ATA_DF			= (1 << 5),	/* device fault */
+	ATA_DRQ			= (1 << 3),	/* data request i/o */
+	ATA_ERR			= (1 << 0),	/* have an error */
+	ATA_SRST		= (1 << 2),	/* software reset */
+	ATA_ABORTED		= (1 << 2),	/* command aborted */
+
+	/* ATA command block registers */
+	ATA_REG_DATA		= 0x00,
+	ATA_REG_ERR		= 0x01,
+	ATA_REG_NSECT		= 0x02,
+	ATA_REG_LBAL		= 0x03,
+	ATA_REG_LBAM		= 0x04,
+	ATA_REG_LBAH		= 0x05,
+	ATA_REG_DEVICE		= 0x06,
+	ATA_REG_STATUS		= 0x07,
+
+	ATA_REG_FEATURE		= ATA_REG_ERR, /* and their aliases */
+	ATA_REG_CMD		= ATA_REG_STATUS,
+	ATA_REG_BYTEL		= ATA_REG_LBAM,
+	ATA_REG_BYTEH		= ATA_REG_LBAH,
+	ATA_REG_DEVSEL		= ATA_REG_DEVICE,
+	ATA_REG_IRQ		= ATA_REG_NSECT,
+
+	/* ATA device commands */
+	ATA_CMD_CHK_POWER	= 0xE5, /* check power mode */
+	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
+	ATA_CMD_FLUSH		= 0xE7,
+	ATA_CMD_FLUSH_EXT	= 0xEA,
+	ATA_CMD_ID_ATA		= 0xEC,
+	ATA_CMD_ID_ATAPI	= 0xA1,
+	ATA_CMD_READ		= 0xC8,
+	ATA_CMD_READ_EXT	= 0x25,
+	ATA_CMD_WRITE		= 0xCA,
+	ATA_CMD_WRITE_EXT	= 0x35,
+	ATA_CMD_PIO_READ	= 0x20,
+	ATA_CMD_PIO_READ_EXT	= 0x24,
+	ATA_CMD_PIO_WRITE	= 0x30,
+	ATA_CMD_PIO_WRITE_EXT	= 0x34,
+	ATA_CMD_SET_FEATURES	= 0xEF,
+	ATA_CMD_PACKET		= 0xA0,
+	ATA_CMD_VERIFY		= 0x40,
+	ATA_CMD_VERIFY_EXT	= 0x42,
+
+	/* SETFEATURES stuff */
+	SETFEATURES_XFER	= 0x03,
+	XFER_UDMA_7		= 0x47,
+	XFER_UDMA_6		= 0x46,
+	XFER_UDMA_5		= 0x45,
+	XFER_UDMA_4		= 0x44,
+	XFER_UDMA_3		= 0x43,
+	XFER_UDMA_2		= 0x42,
+	XFER_UDMA_1		= 0x41,
+	XFER_UDMA_0		= 0x40,
+	XFER_MW_DMA_2		= 0x22,
+	XFER_MW_DMA_1		= 0x21,
+	XFER_MW_DMA_0		= 0x20,
+	XFER_PIO_4		= 0x0C,
+	XFER_PIO_3		= 0x0B,
+	XFER_PIO_2		= 0x0A,
+	XFER_PIO_1		= 0x09,
+	XFER_PIO_0		= 0x08,
+	XFER_SW_DMA_2		= 0x12,
+	XFER_SW_DMA_1		= 0x11,
+	XFER_SW_DMA_0		= 0x10,
+	XFER_PIO_SLOW		= 0x00,
+
+	/* ATAPI stuff */
+	ATAPI_PKT_DMA		= (1 << 0),
+	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
+						   0=to device, 1=to host */
+	ATAPI_CDB_LEN		= 16,
+
+	/* cable types */
+	ATA_CBL_NONE		= 0,
+	ATA_CBL_PATA40		= 1,
+	ATA_CBL_PATA80		= 2,
+	ATA_CBL_PATA_UNK	= 3,
+	ATA_CBL_SATA		= 4,
+
+	/* SATA Status and Control Registers */
+	SCR_STATUS		= 0,
+	SCR_ERROR		= 1,
+	SCR_CONTROL		= 2,
+	SCR_ACTIVE		= 3,
+	SCR_NOTIFICATION	= 4,
+
+	/* struct ata_taskfile flags */
+	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
+	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
+	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
+	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
+};
+
+enum ata_tf_protocols {
+	/* ATA taskfile protocols */
+	ATA_PROT_UNKNOWN,	/* unknown/invalid */
+	ATA_PROT_NODATA,	/* no data */
+	ATA_PROT_PIO,		/* PIO single sector */
+	ATA_PROT_PIO_MULT,	/* PIO multiple sector */
+	ATA_PROT_DMA,		/* DMA */
+	ATA_PROT_ATAPI,		/* packet command, PIO data xfer*/
+	ATA_PROT_ATAPI_NODATA,	/* packet command, no data */
+	ATA_PROT_ATAPI_DMA,	/* packet command with special DMA sauce */
+};
+
+enum ata_ioctls {
+	ATA_IOC_GET_IO32	= 0x309,
+	ATA_IOC_SET_IO32	= 0x324,
+};
+
+/* core structures */
+
+struct ata_prd {
+	u32			addr;
+	u32			flags_len;
+};
+
+struct ata_taskfile {
+	unsigned long		flags;		/* ATA_TFLAG_xxx */
+	u8			protocol;	/* ATA_PROT_xxx */
+
+	u8			ctl;		/* control reg */
+
+	u8			hob_feature;	/* additional data */
+	u8			hob_nsect;	/* to support LBA48 */
+	u8			hob_lbal;
+	u8			hob_lbam;
+	u8			hob_lbah;
+
+	u8			feature;
+	u8			nsect;
+	u8			lbal;
+	u8			lbam;
+	u8			lbah;
+
+	u8			device;
+
+	u8			command;	/* IO operation */
+};
+
+#define ata_id_is_ata(id)	(((id)[0] & (1 << 15)) == 0)
+#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
+#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
+#define ata_id_has_flush(id) ((id)[83] & (1 << 12))
+#define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
+#define ata_id_has_lba48(id)	((id)[83] & (1 << 10))
+#define ata_id_has_wcache(id)	((id)[82] & (1 << 5))
+#define ata_id_has_pm(id)	((id)[82] & (1 << 3))
+#define ata_id_has_lba(id)	((id)[49] & (1 << 9))
+#define ata_id_has_dma(id)	((id)[49] & (1 << 8))
+#define ata_id_removeable(id)	((id)[0] & (1 << 7))
+#define ata_id_u32(id,n)	\
+	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n)	\
+	( ((u64) (id)[(n) + 3] << 48) |	\
+	  ((u64) (id)[(n) + 2] << 32) |	\
+	  ((u64) (id)[(n) + 1] << 16) |	\
+	  ((u64) (id)[(n) + 0]) )
+
+static inline int atapi_cdb_len(u16 *dev_id)
+{
+	u16 tmp = dev_id[0] & 0x3;
+	switch (tmp) {
+	case 0:		return 12;
+	case 1:		return 16;
+	default:	return -1;
+	}
+}
+
+static inline int is_atapi_taskfile(struct ata_taskfile *tf)
+{
+	return (tf->protocol == ATA_PROT_ATAPI) ||
+	       (tf->protocol == ATA_PROT_ATAPI_NODATA) ||
+	       (tf->protocol == ATA_PROT_ATAPI_DMA);
+}
+
+static inline int ata_ok(u8 status)
+{
+	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
+			== ATA_DRDY);
+}
+
+#endif /* __LINUX_ATA_H__ */
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
new file mode 100644
index 000000000000..55fcfc11fdc7
--- /dev/null
+++ b/include/linux/atalk.h
@@ -0,0 +1,245 @@
+#ifndef __LINUX_ATALK_H__
+#define __LINUX_ATALK_H__
+
+#include <net/sock.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST	1
+#define ATPORT_RESERVED	128
+#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
+#define ATADDR_ANYNET	(__u16)0
+#define ATADDR_ANYNODE	(__u8)0
+#define ATADDR_ANYPORT  (__u8)0
+#define ATADDR_BCAST	(__u8)255
+#define DDP_MAXSZ	587
+#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+	__u16	s_net;
+	__u8	s_node;
+};
+
+struct sockaddr_at {
+	sa_family_t	  sat_family;
+	__u8		  sat_port;
+	struct atalk_addr sat_addr;
+	char		  sat_zero[8];
+};
+
+struct atalk_netrange {
+	__u8	nr_phase;
+	__u16	nr_firstnet;
+	__u16	nr_lastnet;
+};
+
+struct atalk_route {
+	struct net_device  *dev;
+	struct atalk_addr  target;
+	struct atalk_addr  gateway;
+	int		   flags;
+	struct atalk_route *next;
+};
+
+/**
+ *	struct atalk_iface - AppleTalk Interface
+ *	@dev - Network device associated with this interface
+ *	@address - Our address
+ *	@status - What are we doing?
+ *	@nets - Associated direct netrange
+ *	@next - next element in the list of interfaces
+ */
+struct atalk_iface {
+	struct net_device	*dev;
+	struct atalk_addr	address;
+	int			status;
+#define ATIF_PROBE	1		/* Probing for an address */
+#define ATIF_PROBE_FAIL	2		/* Probe collided */
+	struct atalk_netrange	nets;
+	struct atalk_iface	*next;
+};
+	
+struct atalk_sock {
+	/* struct sock has to be the first member of atalk_sock */
+	struct sock	sk;
+	unsigned short	dest_net;
+	unsigned short	src_net;
+	unsigned char	dest_node;
+	unsigned char	src_node;
+	unsigned char	dest_port;
+	unsigned char	src_port;
+};
+
+static inline struct atalk_sock *at_sk(struct sock *sk)
+{
+	return (struct atalk_sock *)sk;
+}
+
+#ifdef __KERNEL__
+
+#include <asm/byteorder.h>
+
+struct ddpehdr {
+#ifdef __LITTLE_ENDIAN_BITFIELD
+	__u16	deh_len:10,
+		deh_hops:4,
+		deh_pad:2;
+#else
+	__u16	deh_pad:2,
+		deh_hops:4,
+		deh_len:10;
+#endif
+	__u16	deh_sum;
+	__u16	deh_dnet;
+	__u16	deh_snet;
+	__u8	deh_dnode;
+	__u8	deh_snode;
+	__u8	deh_dport;
+	__u8	deh_sport;
+	/* And netatalk apps expect to stick the type in themselves */
+};
+
+static __inline__ struct ddpehdr *ddp_hdr(struct sk_buff *skb)
+{
+	return (struct ddpehdr *)skb->h.raw;
+}
+
+/*
+ *	Don't drop the struct into the struct above.  You'll get some
+ *	surprise padding.
+ */
+struct ddpebits {
+#ifdef __LITTLE_ENDIAN_BITFIELD
+	__u16	deh_len:10,
+		deh_hops:4,
+		deh_pad:2;
+#else
+	__u16	deh_pad:2,
+		deh_hops:4,
+		deh_len:10;
+#endif
+};
+
+/* Short form header */
+struct ddpshdr {
+#ifdef __LITTLE_ENDIAN_BITFIELD
+	__u16	dsh_len:10,
+		dsh_pad:6;
+#else
+	__u16	dsh_pad:6,
+		dsh_len:10;
+#endif
+	__u8	dsh_dport;
+	__u8	dsh_sport;
+	/* And netatalk apps expect to stick the type in themselves */
+};
+
+/* AppleTalk AARP headers */
+struct elapaarp {
+	__u16	hw_type;
+#define AARP_HW_TYPE_ETHERNET		1
+#define AARP_HW_TYPE_TOKENRING		2
+	__u16	pa_type;
+	__u8	hw_len;
+	__u8	pa_len;
+#define AARP_PA_ALEN			4
+	__u16	function;
+#define AARP_REQUEST			1
+#define AARP_REPLY			2
+#define AARP_PROBE			3
+	__u8	hw_src[ETH_ALEN]	__attribute__ ((packed));
+	__u8	pa_src_zero		__attribute__ ((packed));
+	__u16	pa_src_net		__attribute__ ((packed));
+	__u8	pa_src_node		__attribute__ ((packed));
+	__u8	hw_dst[ETH_ALEN]	__attribute__ ((packed));
+	__u8	pa_dst_zero		__attribute__ ((packed));
+	__u16	pa_dst_net		__attribute__ ((packed));
+	__u8	pa_dst_node		__attribute__ ((packed));	
+};
+
+static __inline__ struct elapaarp *aarp_hdr(struct sk_buff *skb)
+{
+	return (struct elapaarp *)skb->h.raw;
+}
+
+/* Not specified - how long till we drop a resolved entry */
+#define AARP_EXPIRY_TIME	(5 * 60 * HZ)
+/* Size of hash table */
+#define AARP_HASH_SIZE		16
+/* Fast retransmission timer when resolving */
+#define AARP_TICK_TIME		(HZ / 5)
+/* Send 10 requests then give up (2 seconds) */
+#define AARP_RETRANSMIT_LIMIT	10
+/*
+ * Some value bigger than total retransmit time + a bit for last reply to
+ * appear and to stop continual requests
+ */
+#define AARP_RESOLVE_TIME	(10 * HZ)
+
+extern struct datalink_proto *ddp_dl, *aarp_dl;
+extern void aarp_proto_init(void);
+
+/* Inter module exports */
+
+/* Give a device find its atif control structure */
+static inline struct atalk_iface *atalk_find_dev(struct net_device *dev)
+{
+	return dev->atalk_ptr;
+}
+
+extern struct atalk_addr *atalk_find_dev_addr(struct net_device *dev);
+extern struct net_device *atrtr_get_dev(struct atalk_addr *sa);
+extern int		 aarp_send_ddp(struct net_device *dev,
+				       struct sk_buff *skb,
+				       struct atalk_addr *sa, void *hwaddr);
+extern void		 aarp_device_down(struct net_device *dev);
+extern void		 aarp_probe_network(struct atalk_iface *atif);
+extern int 		 aarp_proxy_probe_network(struct atalk_iface *atif,
+				     struct atalk_addr *sa);
+extern void		 aarp_proxy_remove(struct net_device *dev,
+					   struct atalk_addr *sa);
+
+extern void		aarp_cleanup_module(void);
+
+extern struct hlist_head atalk_sockets;
+extern rwlock_t atalk_sockets_lock;
+
+extern struct atalk_route *atalk_routes;
+extern rwlock_t atalk_routes_lock;
+
+extern struct atalk_iface *atalk_interfaces;
+extern rwlock_t atalk_interfaces_lock;
+
+extern struct atalk_route atrtr_default;
+
+extern struct file_operations atalk_seq_arp_fops;
+
+extern int sysctl_aarp_expiry_time;
+extern int sysctl_aarp_tick_time;
+extern int sysctl_aarp_retransmit_limit;
+extern int sysctl_aarp_resolve_time;
+
+#ifdef CONFIG_SYSCTL
+extern void atalk_register_sysctl(void);
+extern void atalk_unregister_sysctl(void);
+#else
+#define atalk_register_sysctl()		do { } while(0)
+#define atalk_unregister_sysctl()	do { } while(0)
+#endif
+
+#ifdef CONFIG_PROC_FS
+extern int atalk_proc_init(void);
+extern void atalk_proc_exit(void);
+#else
+#define atalk_proc_init()	({ 0; })
+#define atalk_proc_exit()	do { } while(0)
+#endif /* CONFIG_PROC_FS */
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
new file mode 100644
index 000000000000..60136684e0af
--- /dev/null
+++ b/include/linux/atm.h
@@ -0,0 +1,243 @@
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _LINUX_ATM_H
+#define _LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#ifdef __KERNEL__
+#include <linux/socket.h>
+#include <linux/types.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	uint32_t	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+    int number;
+    int length;
+    void __user *arg;
+};
+
+typedef unsigned short atm_backend_t;
+#endif
diff --git a/include/linux/atm_eni.h b/include/linux/atm_eni.h
new file mode 100644
index 000000000000..34f317972551
--- /dev/null
+++ b/include/linux/atm_eni.h
@@ -0,0 +1,23 @@
+/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ENI_H
+#define LINUX_ATM_ENI_H
+
+#include <linux/atmioc.h>
+
+
+struct eni_multipliers {
+	int tx,rx;	/* values are in percent and must be > 100 */
+};
+
+
+#define ENI_MEMDUMP     _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
+                                                /* printk memory map */
+#define ENI_SETMULT	_IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
+						/* set buffer multipliers */
+
+#endif
diff --git a/include/linux/atm_he.h b/include/linux/atm_he.h
new file mode 100644
index 000000000000..2a7713b597cf
--- /dev/null
+++ b/include/linux/atm_he.h
@@ -0,0 +1,20 @@
+/* atm_he.h */
+
+#ifndef LINUX_ATM_HE_H
+#define LINUX_ATM_HE_H
+
+#include <linux/atmioc.h>
+
+#define HE_GET_REG	_IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
+
+#define HE_REGTYPE_PCI	1
+#define HE_REGTYPE_RCM	2
+#define HE_REGTYPE_TCM	3
+#define HE_REGTYPE_MBOX	4
+
+struct he_ioctl_reg {
+	unsigned addr, val;
+	char type;
+};
+
+#endif /* LINUX_ATM_HE_H */
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
new file mode 100644
index 000000000000..05621cf20709
--- /dev/null
+++ b/include/linux/atm_idt77105.h
@@ -0,0 +1,28 @@
+/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
+ * use by driver-specific utilities) */
+
+/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
+
+
+#ifndef LINUX_ATM_IDT77105_H
+#define LINUX_ATM_IDT77105_H
+
+#include <asm/types.h>
+#include <linux/atmioc.h>
+#include <linux/atmdev.h>
+
+/*
+ * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
+ * Pointed to by `arg' in atmif_sioc.
+ */
+struct idt77105_stats {
+        __u32 symbol_errors;  /* wire symbol errors */
+        __u32 tx_cells;       /* cells transmitted */
+        __u32 rx_cells;       /* cells received */
+        __u32 rx_hec_errors;  /* Header Error Check errors on receive */
+};
+
+#define IDT77105_GETSTAT	_IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc)	/* get stats */
+#define IDT77105_GETSTATZ	_IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc)	/* get stats and zero */
+
+#endif
diff --git a/include/linux/atm_nicstar.h b/include/linux/atm_nicstar.h
new file mode 100644
index 000000000000..577b79f33e8d
--- /dev/null
+++ b/include/linux/atm_nicstar.h
@@ -0,0 +1,53 @@
+/******************************************************************************
+ *
+ * atm_nicstar.h
+ *
+ * Driver-specific declarations for use by NICSTAR driver specific utils.
+ *
+ * Author: Rui Prior
+ *
+ * (C) INESC 1998
+ *
+ ******************************************************************************/
+
+
+#ifndef LINUX_ATM_NICSTAR_H
+#define LINUX_ATM_NICSTAR_H
+
+/* Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define NS_GETPSTAT	_IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define NS_SETBUFLEV	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* set buffer level markers */
+#define NS_ADJBUFLEV	_IO('a',ATMIOC_SARPRV+3)
+						/* adjust buffer level */
+
+typedef struct buf_nr
+{
+   unsigned min;
+   unsigned init;
+   unsigned max;
+}buf_nr;
+
+
+typedef struct pool_levels
+{
+   int buftype;
+   int count;		/* (At least for now) only used in NS_GETPSTAT */
+   buf_nr level;
+} pool_levels;
+
+/* type must be one of the following: */
+#define NS_BUFTYPE_SMALL 1
+#define NS_BUFTYPE_LARGE 2
+#define NS_BUFTYPE_HUGE 3
+#define NS_BUFTYPE_IOVEC 4
+
+
+#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/include/linux/atm_suni.h b/include/linux/atm_suni.h
new file mode 100644
index 000000000000..84f3aab54468
--- /dev/null
+++ b/include/linux/atm_suni.h
@@ -0,0 +1,12 @@
+/* atm_suni.h - Driver-specific declarations of the SUNI driver (for use by
+		driver-specific utilities) */
+
+/* Written 1998,2000 by Werner Almesberger, EPFL ICA */
+
+
+#ifndef LINUX_ATM_SUNI_H
+#define LINUX_ATM_SUNI_H
+
+/* everything obsoleted */
+
+#endif
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
new file mode 100644
index 000000000000..18787f9b2f19
--- /dev/null
+++ b/include/linux/atm_tcp.h
@@ -0,0 +1,75 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_TCP_H
+#define LINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+#include <linux/atmioc.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+	uint16_t	vpi;
+	uint16_t	vci;
+	uint32_t	length;		/* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
+#define ATMTCP_CTRL_OPEN	1	/* request/reply */
+#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+
+struct atmtcp_control {
+	struct atmtcp_hdr hdr;	/* must be first */
+	int type;		/* message type; both directions */
+	atm_kptr_t vcc;		/* both directions */
+	struct sockaddr_atmpvc addr; /* suggested value from kernel */
+	struct atm_qos	qos;	/* both directions */
+	int result;		/* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
+ * -----------  ----	------- ----	----	---	---	------
+ * OPEN		K->D	Y	Y	Y	Y	Y	0
+ * OPEN		D->K	-	Y	Y	Y	Y	Y
+ * CLOSE	K->D	-	-	Y	-	Y	0
+ * CLOSE	D->K	-	-	-	-	Y	Y
+ */
+
+#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
+#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
+						   interface */
+#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
+						   interface */
+
+
+#ifdef __KERNEL__
+
+struct atm_tcp_ops {
+	int (*attach)(struct atm_vcc *vcc,int itf);
+	int (*create_persistent)(int itf);
+	int (*remove_persistent)(int itf);
+	struct module *owner;
+};
+
+extern struct atm_tcp_ops atm_tcp_ops;
+
+#endif
+
+#endif
diff --git a/include/linux/atm_zatm.h b/include/linux/atm_zatm.h
new file mode 100644
index 000000000000..10f0fa29454f
--- /dev/null
+++ b/include/linux/atm_zatm.h
@@ -0,0 +1,52 @@
+/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
+		driver-specific utilities) */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ZATM_H
+#define LINUX_ATM_ZATM_H
+
+/*
+ * Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define ZATM_GETPOOL	_IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define ZATM_GETPOOLZ	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* get statistics and zero */
+#define ZATM_SETPOOL	_IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
+						/* set pool parameters */
+
+struct zatm_pool_info {
+	int ref_count;			/* free buffer pool usage counters */
+	int low_water,high_water;	/* refill parameters */
+	int rqa_count,rqu_count;	/* queue condition counters */
+	int offset,next_off;		/* alignment optimizations: offset */
+	int next_cnt,next_thres;	/* repetition counter and threshold */
+};
+
+struct zatm_pool_req {
+	int pool_num;			/* pool number */
+	struct zatm_pool_info info;	/* actual information */
+};
+
+struct zatm_t_hist {
+	struct timeval real;		/* real (wall-clock) time */
+	struct timeval expected;	/* expected real time */
+};
+
+
+#define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
+#define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
+#define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
+#define ZATM_LAST_POOL	ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
+
+#define ZATM_TIMER_HISTORY_SIZE	16	/* number of timer adjustments to
+					   record; must be 2^n */
+
+#endif
diff --git a/include/linux/atmapi.h b/include/linux/atmapi.h
new file mode 100644
index 000000000000..8fe54d90d95b
--- /dev/null
+++ b/include/linux/atmapi.h
@@ -0,0 +1,29 @@
+/* atmapi.h - ATM API user space/kernel compatibility */
+ 
+/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
+ 
+
+#ifndef _LINUX_ATMAPI_H
+#define _LINUX_ATMAPI_H
+
+#if defined(__sparc__) || defined(__ia64__)
+/* such alignment is not required on 32 bit sparcs, but we can't
+   figure that we are on a sparc64 while compiling user-space programs. */
+#define __ATM_API_ALIGN	__attribute__((aligned(8)))
+#else
+#define __ATM_API_ALIGN
+#endif
+
+
+/*
+ * Opaque type for kernel pointers. Note that _ is never accessed. We need
+ * the struct in order hide the array, so that we can make simple assignments
+ * instead of being forced to use memcpy. It also improves error reporting for
+ * code that still assumes that we're passing unsigned longs.
+ *
+ * Convention: NULL pointers are passed as a field of all zeroes.
+ */
+ 
+typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
+
+#endif
diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h
new file mode 100644
index 000000000000..24f82338f59a
--- /dev/null
+++ b/include/linux/atmarp.h
@@ -0,0 +1,43 @@
+/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMARP_H
+#define _LINUX_ATMARP_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+
+#define ATMARP_RETRY_DELAY 30		/* request next resolution or forget
+					   NAK after 30 sec - should go into
+					   atmclip.h */
+#define ATMARP_MAX_UNRES_PACKETS 5	/* queue that many packets while
+					   waiting for the resolver */
+
+
+#define ATMARPD_CTRL	_IO('a',ATMIOC_CLIP+1)	/* become atmarpd ctrl sock */
+#define ATMARP_MKIP	_IO('a',ATMIOC_CLIP+2)	/* attach socket to IP */
+#define ATMARP_SETENTRY	_IO('a',ATMIOC_CLIP+3)	/* fill or hide ARP entry */
+#define ATMARP_ENCAP	_IO('a',ATMIOC_CLIP+5)	/* change encapsulation */
+
+
+enum atmarp_ctrl_type {
+	act_invalid,		/* catch uninitialized structures */
+	act_need,		/* need address resolution */
+	act_up,			/* interface is coming up */
+	act_down,		/* interface is going down */
+	act_change		/* interface configuration has changed */
+};
+
+struct atmarp_ctrl {
+	enum atmarp_ctrl_type	type;	/* message type */
+	int			itf_num;/* interface number (if present) */
+	uint32_t		ip;	/* IP address (act_need only) */
+};
+
+#endif
diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h
new file mode 100644
index 000000000000..7981b733f1ef
--- /dev/null
+++ b/include/linux/atmbr2684.h
@@ -0,0 +1,101 @@
+#ifndef _LINUX_ATMBR2684_H
+#define _LINUX_ATMBR2684_H
+
+#include <linux/atm.h>
+#include <linux/if.h>		/* For IFNAMSIZ */
+
+/*
+ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
+ * ethernet is supported
+ */
+#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
+#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
+#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
+#define BR2684_MEDIA_FDDI	(3)
+#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
+
+/*
+ * Is there FCS inbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSIN_NO		(0)
+#define BR2684_FCSIN_IGNORE	(1)
+#define BR2684_FCSIN_VERIFY	(2)
+
+/*
+ * Is there FCS outbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSOUT_NO	(0)
+#define BR2684_FCSOUT_SENDZERO	(1)
+#define BR2684_FCSOUT_GENERATE	(2)
+
+/*
+ * Does this VC include LLC encapsulation?
+ */
+#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
+#define BR2684_ENCAPS_LLC	(1)
+#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
+
+/*
+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_newif_br2684 {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
+	int		media;		/* BR2684_MEDIA_* */
+	char		ifname[IFNAMSIZ];
+	int		mtu;
+};
+
+/*
+ * This structure is used to specify a br2684 interface - either by a
+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
+ */
+#define BR2684_FIND_BYNOTHING	(0)
+#define BR2684_FIND_BYNUM	(1)
+#define BR2684_FIND_BYIFNAME	(2)
+struct br2684_if_spec {
+	int method;			/* BR2684_FIND_* */
+	union {
+		char		ifname[IFNAMSIZ];
+		int		devnum;
+	} spec;
+};
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_br2684 {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
+	struct br2684_if_spec ifspec;
+	int	fcs_in;		/* BR2684_FCSIN_* */
+	int	fcs_out;	/* BR2684_FCSOUT_* */
+	int	fcs_auto;	/* 1: fcs_{in,out} disabled if no FCS rx'ed */
+	int	encaps;		/* BR2684_ENCAPS_* */
+	int	has_vpiid;	/* 1: use vpn_id - Unsupported */
+	__u8	vpn_id[7];
+	int	send_padding;	/* unsupported */
+	int	min_size;	/* we will pad smaller packets than this */
+};
+
+/*
+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
+ * terminating a large number of IP-only vcc's.  When netfilter allows
+ * efficient per-if in/out filters, this support will be removed
+ */
+struct br2684_filter {
+	__u32	prefix;		/* network byte order */
+	__u32	netmask;	/* 0 = disable filter */
+};
+
+struct br2684_filter_set {
+	struct br2684_if_spec ifspec;
+	struct br2684_filter filter;
+};
+
+#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
+				struct br2684_filter_set)
+
+#endif /* _LINUX_ATMBR2684_H */
diff --git a/include/linux/atmclip.h b/include/linux/atmclip.h
new file mode 100644
index 000000000000..02c94c448dd6
--- /dev/null
+++ b/include/linux/atmclip.h
@@ -0,0 +1,21 @@
+/* atmclip.h - Classical IP over ATM */
+ 
+/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_ATMCLIP_H
+#define LINUX_ATMCLIP_H
+
+#include <linux/sockios.h>
+#include <linux/atmioc.h>
+
+
+#define RFC1483LLC_LEN	8		/* LLC+OUI+PID = 8 */
+#define RFC1626_MTU	9180		/* RFC1626 default MTU */
+
+#define CLIP_DEFAULT_IDLETIMER 1200	/* 20 minutes, see RFC1755 */
+#define CLIP_CHECK_INTERVAL	 10	/* check every ten seconds */
+
+#define	SIOCMKCLIP	_IO('a',ATMIOC_CLIP)	/* create IP interface */
+
+#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
new file mode 100644
index 000000000000..9f374cfa1b05
--- /dev/null
+++ b/include/linux/atmdev.h
@@ -0,0 +1,489 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_ATMDEV_H
+#define LINUX_ATMDEV_H
+
+
+#include <linux/config.h>
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN		6
+
+#define ATM_OC3_PCR	(155520000/270*260/8/53)
+			/* OC3 link rate:  155520000 bps
+			   SONET overhead: /270*260 (9 section, 1 path)
+			   bits per cell:  /8/53
+			   max cell rate:  353207.547 cells/sec */
+#define ATM_25_PCR	((25600000/8-8000)/54)
+			/* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
+			/* OC12 link rate: 622080000 bps
+			   SONET overhead: /1080*1040
+			   bits per cell:  /8/53
+			   max cell rate:  1412830.188 cells/sec */
+#define ATM_DS3_PCR	(8000*12)
+			/* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+    __HANDLE_ITEM(tx);			/* TX okay */ \
+    __HANDLE_ITEM(tx_err);		/* TX errors */ \
+    __HANDLE_ITEM(rx);			/* RX okay */ \
+    __HANDLE_ITEM(rx_err);		/* RX errors */ \
+    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+	struct atm_aal_stats aal0;
+	struct atm_aal_stats aal34;
+	struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+					/* get link rate */
+#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+					/* get interface names (numbers) */
+#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+					/* get interface type name */
+#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+					/* get interface ESI */
+#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+					/* get itf's local ATM addr. list */
+#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+					/* reset itf's ATM address list */
+#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+					/* add a local ATM address */
+#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+					/* remove a local ATM address */
+#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+					/* get connection identifier range */
+#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+					/* set connection identifier range */
+#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+					/* set interface ESI */
+#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+					/* force interface ESI */
+#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+					/* get AAL layer statistics */
+#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+					/* get AAL layer statistics and zero */
+#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+					/* get loopback mode */
+#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+					/* set loopback mode */
+#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+					/* query supported loopback modes */
+#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
+					/* enable or disable single-copy */
+#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
+#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ 					/* add party to p2mp call */
+#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
+					/* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above.  In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW		0	
+#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
+#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
+#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
+/* RESERVED		4	loop back on PHY side  ---'		      */
+#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
+#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n)	((n) & 0xff)
+#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE	0	/* no loopback */
+
+#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+	int length;
+	void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
+ 
+struct atm_cirange {
+	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
+	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX	1024		/* enable RX single-copy */
+#define ATM_SC_TX	2048		/* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+				  anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED	 1	/* Block until change is effective */
+#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
+#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
+#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
+#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
+#define ATM_MF_BWD	32	/* Set the backward direction parameters */
+
+#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+			  ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE	0	/* VC is not used */
+#define ATM_VS_CONNECTED 1	/* VC is connected */
+#define ATM_VS_CLOSING	2	/* VC is closing */
+#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
+#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND	5	/* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
+    "RELEASED", "HASQOS",	"LISTEN",	"META", \
+    "256",	"512",		"1024",		"2048", \
+    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+
+
+#ifdef __KERNEL__
+
+#include <linux/wait.h> /* wait_queue_head_t */
+#include <linux/time.h> /* struct timeval */
+#include <linux/net.h>
+#include <linux/skbuff.h> /* struct sk_buff */
+#include <linux/uio.h>
+#include <net/sock.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+
+extern struct proc_dir_entry *atm_proc_root;
+#endif
+
+
+struct k_atm_aal_stats {
+#define __HANDLE_ITEM(i) atomic_t i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct k_atm_dev_stats {
+	struct k_atm_aal_stats aal0;
+	struct k_atm_aal_stats aal34;
+	struct k_atm_aal_stats aal5;
+};
+
+
+enum {
+	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
+				   by device driver. */
+	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
+				   driver, cleared by anybody. */
+	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
+				   setup), controlled by socket layer */
+	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
+				   socket layer */
+	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
+				   layer */
+	ATM_VF_RELEASED,	/* demon has indicated/requested release,
+				   controlled by SVC socket layer */
+	ATM_VF_HASQOS,		/* QOS parameters have been set */
+	ATM_VF_LISTEN,		/* socket is used for listening */
+	ATM_VF_META,		/* SVC socket isn't used for normal data
+				   traffic and doesn't depend on signaling
+				   to be available */
+	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
+	ATM_VF_HASSAP,		/* SAP has been set */
+	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
+	ATM_VF_WAITING,		/* waiting for reply from sigd */
+	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
+};
+
+
+#define ATM_VF2VS(flags) \
+    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
+     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
+     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
+     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
+     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
+
+
+enum {
+	ATM_DF_CLOSE,		/* close device when last VCC is closed */
+};
+
+
+#define ATM_PHY_SIG_LOST    0	/* no carrier/light */
+#define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
+#define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
+
+#define ATM_ATMOPT_CLP	1	/* set CLP bit */
+
+struct atm_vcc {
+	/* struct sock has to be the first member of atm_vcc */
+	struct sock	sk;
+	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
+	short		vpi;		/* VPI and VCI (types must be equal */
+					/* with sockaddr) */
+	int 		vci;
+	unsigned long	aal_options;	/* AAL layer options */
+	unsigned long	atm_options;	/* ATM layer options */
+	struct atm_dev	*dev;		/* device back pointer */
+	struct atm_qos	qos;		/* QOS */
+	struct atm_sap	sap;		/* SAP */
+	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
+	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
+	int (*push_oam)(struct atm_vcc *vcc,void *cell);
+	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+	void		*dev_data;	/* per-device data */
+	void		*proto_data;	/* per-protocol data */
+	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
+	/* SVC part --- may move later ------------------------------------- */
+	short		itf;		/* interface number */
+	struct sockaddr_atmsvc local;
+	struct sockaddr_atmsvc remote;
+	/* Multipoint part ------------------------------------------------- */
+	struct atm_vcc	*session;	/* session VCC descriptor */
+	/* Other stuff ----------------------------------------------------- */
+	void		*user_back;	/* user backlink - not touched by */
+					/* native ATM stack. Currently used */
+					/* by CLIP and sch_atm. */
+};
+
+static inline struct atm_vcc *atm_sk(struct sock *sk)
+{
+	return (struct atm_vcc *)sk;
+}
+
+static inline struct atm_vcc *ATM_SD(struct socket *sock)
+{
+	return atm_sk(sock->sk);
+}
+
+static inline struct sock *sk_atm(struct atm_vcc *vcc)
+{
+	return (struct sock *)vcc;
+}
+
+struct atm_dev_addr {
+	struct sockaddr_atmsvc addr;	/* ATM address */
+	struct list_head entry;		/* next address */
+};
+
+struct atm_dev {
+	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
+	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
+					/* (NULL) */
+	const char	*type;		/* device type name */
+	int		number;		/* device index */
+	void		*dev_data;	/* per-device data */
+	void		*phy_data;	/* private PHY date */
+	unsigned long	flags;		/* device flags (ATM_DF_*) */
+	struct list_head local;		/* local ATM addresses */
+	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
+	struct atm_cirange ci_range;	/* VPI/VCI range */
+	struct k_atm_dev_stats stats;	/* statistics */
+	char		signal;		/* signal status (ATM_PHY_SIG_*) */
+	int		link_rate;	/* link rate (default: OC3) */
+	atomic_t	refcnt;		/* reference count */
+	spinlock_t	lock;		/* protect internal members */
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry; /* proc entry */
+	char *proc_name;		/* proc entry name */
+#endif
+	struct list_head dev_list;	/* linkage */
+};
+
+ 
+/* OF: send_Oam Flags */
+
+#define ATM_OF_IMMED  1		/* Attempt immediate delivery */
+#define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
+
+
+/*
+ * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
+ */
+
+struct atmdev_ops { /* only send is required */
+	void (*dev_close)(struct atm_dev *dev);
+	int (*open)(struct atm_vcc *vcc);
+	void (*close)(struct atm_vcc *vcc);
+	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
+	    void __user *optval,int optlen);
+	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
+	    void __user *optval,int optlen);
+	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
+	void (*phy_put)(struct atm_dev *dev,unsigned char value,
+	    unsigned long addr);
+	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
+	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
+	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
+	struct module *owner;
+};
+
+struct atmphy_ops {
+	int (*start)(struct atm_dev *dev);
+	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+	void (*interrupt)(struct atm_dev *dev);
+	int (*stop)(struct atm_dev *dev);
+};
+
+struct atm_skb_data {
+	struct atm_vcc	*vcc;		/* ATM VCC */
+	unsigned long	atm_options;	/* ATM layer options */
+};
+
+#define VCC_HTABLE_SIZE 32
+
+extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
+extern rwlock_t vcc_sklist_lock;
+
+#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
+
+struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
+    int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_lookup(int number);
+void atm_dev_deregister(struct atm_dev *dev);
+void shutdown_atm_dev(struct atm_dev *dev);
+void vcc_insert_socket(struct sock *sk);
+
+
+/*
+ * This is approximately the algorithm used by alloc_skb.
+ *
+ */
+
+static inline int atm_guess_pdu2truesize(int size)
+{
+	return (SKB_DATA_ALIGN(size) + sizeof(struct skb_shared_info));
+}
+
+
+static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
+{
+	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline void atm_return(struct atm_vcc *vcc,int truesize)
+{
+	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
+{
+	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
+	       sk_atm(vcc)->sk_sndbuf;
+}
+
+
+static inline void atm_dev_hold(struct atm_dev *dev)
+{
+	atomic_inc(&dev->refcnt);
+}
+
+
+static inline void atm_dev_put(struct atm_dev *dev)
+{
+	atomic_dec(&dev->refcnt);
+
+	if ((atomic_read(&dev->refcnt) == 1) &&
+	    test_bit(ATM_DF_CLOSE,&dev->flags))
+		shutdown_atm_dev(dev);
+}
+
+
+int atm_charge(struct atm_vcc *vcc,int truesize);
+struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
+    int gfp_flags);
+int atm_pcr_goal(struct atm_trafprm *tp);
+
+void vcc_release_async(struct atm_vcc *vcc, int reply);
+
+struct atm_ioctl {
+	struct module *owner;
+	/* A module reference is kept if appropriate over this call.
+	 * Return -ENOIOCTLCMD if you don't handle it. */
+	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
+	struct list_head list;
+};
+
+/**
+ * register_atm_ioctl - register handler for ioctl operations
+ *
+ * Special (non-device) handlers of ioctl's should
+ * register here. If you're a normal device, you should
+ * set .ioctl in your atmdev_ops instead.
+ */
+void register_atm_ioctl(struct atm_ioctl *);
+
+/**
+ * deregister_atm_ioctl - remove the ioctl handler
+ */
+void deregister_atm_ioctl(struct atm_ioctl *);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/atmioc.h b/include/linux/atmioc.h
new file mode 100644
index 000000000000..37f67aa8f1c1
--- /dev/null
+++ b/include/linux/atmioc.h
@@ -0,0 +1,41 @@
+/* atmioc.h - ranges for ATM-related ioctl numbers */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+/*
+ * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
+ * "magic" ioctl numbers.
+ */
+
+
+#ifndef _LINUX_ATMIOC_H
+#define _LINUX_ATMIOC_H
+
+#include <asm/ioctl.h>
+		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
+
+#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
+#define ATMIOC_PHYCOM_END 0x0f
+#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
+#define ATMIOC_PHYTYP_END 0x2f
+#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
+#define ATMIOC_PHYPRV_END 0x4f
+#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
+#define ATMIOC_SARCOM_END 0x50
+#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
+#define ATMIOC_SARPRV_END 0x7f
+#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
+#define ATMIOC_ITF_END	  0x8f
+#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
+#define ATMIOC_BACKEND_END 0xaf
+/* 0xb0-0xbf: Reserved for future use */
+#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
+#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
+#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
+#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
+#define	ATMIOC_CLIP_END	  0xef
+#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
+#define	ATMIOC_SPECIAL_END 0xff
+
+#endif
diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h
new file mode 100644
index 000000000000..f267f2442766
--- /dev/null
+++ b/include/linux/atmlec.h
@@ -0,0 +1,88 @@
+/*
+ * 
+ * ATM Lan Emulation Daemon vs. driver interface
+ *
+ * mkiiskila@yahoo.com
+ *
+ */
+
+#ifndef _ATMLEC_H_
+#define _ATMLEC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+#include <linux/if_ether.h>
+/* ATM lec daemon control socket */
+#define ATMLEC_CTRL _IO('a',ATMIOC_LANE)
+#define ATMLEC_DATA _IO('a',ATMIOC_LANE+1)
+#define ATMLEC_MCAST _IO('a',ATMIOC_LANE+2)
+
+/* Maximum number of LEC interfaces (tweakable) */
+#define MAX_LEC_ITF 48
+
+/* From the total of MAX_LEC_ITF, last NUM_TR_DEVS are reserved for Token Ring.
+ * E.g. if MAX_LEC_ITF = 48 and NUM_TR_DEVS = 8, then lec0-lec39 are for
+ * Ethernet ELANs and lec40-lec47 are for Token Ring ELANS.
+ */
+#define NUM_TR_DEVS 8
+
+typedef enum { 
+        l_set_mac_addr,   l_del_mac_addr, 
+        l_svc_setup, 
+        l_addr_delete,    l_topology_change, 
+        l_flush_complete, l_arp_update,
+        l_narp_req, /* LANE2 mandates the use of this */
+        l_config,         l_flush_tran_id, 
+        l_set_lecid,      l_arp_xmt,
+        l_rdesc_arp_xmt,
+        l_associate_req,
+        l_should_bridge   /* should we bridge this MAC? */
+} atmlec_msg_type;
+
+#define ATMLEC_MSG_TYPE_MAX l_should_bridge
+
+struct atmlec_config_msg {
+        unsigned int maximum_unknown_frame_count;
+        unsigned int max_unknown_frame_time;
+        unsigned short max_retry_count;
+        unsigned int aging_time;
+        unsigned int forward_delay_time;
+        unsigned int arp_response_time;
+        unsigned int flush_timeout;
+        unsigned int path_switching_delay;
+        unsigned int  lane_version; /* LANE2: 1 for LANEv1, 2 for LANEv2 */
+        int mtu;
+        int is_proxy;
+};
+ 
+struct atmlec_msg {
+        atmlec_msg_type type;
+        int             sizeoftlvs;        /* LANE2: if != 0, tlvs follow */ 
+        union {
+                struct {
+                        unsigned char mac_addr[ETH_ALEN];
+                        unsigned char atm_addr[ATM_ESA_LEN];
+                        unsigned int flag;/* Topology_change flag, 
+                                              remoteflag, permanent flag,
+                                              lecid, transaction id */
+                        unsigned int targetless_le_arp; /* LANE2 */
+                        unsigned int no_source_le_narp; /* LANE2 */
+                } normal;
+                struct atmlec_config_msg config;
+                struct {
+                        uint16_t lec_id;                     /* requestor lec_id  */
+                        uint32_t tran_id;                    /* transaction id    */
+                        unsigned char mac_addr[ETH_ALEN];    /* dst mac addr      */
+                        unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */
+                } proxy;
+		     /* For mapping LE_ARP requests to responses. Filled by */
+        } content;       /* zeppelin, returned by kernel. Used only when proxying */ 
+} __ATM_API_ALIGN;
+
+struct atmlec_ioc {
+        int dev_num;
+        unsigned char atm_addr[ATM_ESA_LEN];
+        unsigned char receive;    /* 1= receive vcc, 0 = send vcc */
+};
+#endif /* _ATMLEC_H_ */
diff --git a/include/linux/atmmpc.h b/include/linux/atmmpc.h
new file mode 100644
index 000000000000..5fbfa68136d3
--- /dev/null
+++ b/include/linux/atmmpc.h
@@ -0,0 +1,125 @@
+#ifndef _ATMMPC_H_
+#define _ATMMPC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+
+#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
+#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
+
+#define MPC_SOCKET_INGRESS 1
+#define MPC_SOCKET_EGRESS  2
+
+struct atmmpc_ioc {
+        int dev_num;
+        uint32_t ipaddr;              /* the IP address of the shortcut    */
+        int type;                     /* ingress or egress                 */
+};
+
+typedef struct in_ctrl_info {
+        uint8_t   Last_NHRP_CIE_code;
+        uint8_t   Last_Q2931_cause_value;     
+        uint8_t   eg_MPC_ATM_addr[ATM_ESA_LEN];
+        uint32_t  tag;
+        uint32_t  in_dst_ip;      /* IP address this ingress MPC sends packets to */
+        uint16_t  holding_time;
+        uint32_t  request_id;
+} in_ctrl_info;
+
+typedef struct eg_ctrl_info {
+        uint8_t   DLL_header[256];
+        uint8_t   DH_length;
+        uint32_t  cache_id;
+        uint32_t  tag;
+        uint32_t  mps_ip;
+        uint32_t  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
+        uint8_t   in_MPC_data_ATM_addr[ATM_ESA_LEN];
+        uint16_t  holding_time;
+} eg_ctrl_info;
+
+struct mpc_parameters {
+        uint16_t mpc_p1;   /* Shortcut-Setup Frame Count    */
+        uint16_t mpc_p2;   /* Shortcut-Setup Frame Time     */
+        uint8_t mpc_p3[8]; /* Flow-detection Protocols      */
+        uint16_t mpc_p4;   /* MPC Initial Retry Time        */
+        uint16_t mpc_p5;   /* MPC Retry Time Maximum        */
+        uint16_t mpc_p6;   /* Hold Down Time                */      
+} ;
+
+struct k_message {
+        uint16_t type;
+        uint32_t ip_mask;
+        uint8_t  MPS_ctrl[ATM_ESA_LEN];
+        union {
+                in_ctrl_info in_info;
+                eg_ctrl_info eg_info;
+                struct mpc_parameters params;
+        } content;
+        struct atm_qos qos;       
+} __ATM_API_ALIGN;
+
+struct llc_snap_hdr {
+	/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
+        uint8_t  dsap;    /* Destination Service Access Point (0xAA)     */
+        uint8_t  ssap;    /* Source Service Access Point      (0xAA)     */
+        uint8_t  ui;      /* Unnumbered Information           (0x03)     */
+        uint8_t  org[3];  /* Organizational identification    (0x000000) */
+        uint8_t  type[2]; /* Ether type (for IP)              (0x0800)   */
+};
+
+/* TLVs this MPC recognizes */
+#define TLV_MPOA_DEVICE_TYPE         0x00a03e2a  
+
+/* MPOA device types in MPOA Device Type TLV */
+#define NON_MPOA    0
+#define MPS         1
+#define MPC         2
+#define MPS_AND_MPC 3
+
+
+/* MPC parameter defaults */
+
+#define MPC_P1 10  /* Shortcut-Setup Frame Count  */ 
+#define MPC_P2 1   /* Shortcut-Setup Frame Time   */
+#define MPC_P3 0   /* Flow-detection Protocols    */
+#define MPC_P4 5   /* MPC Initial Retry Time      */
+#define MPC_P5 40  /* MPC Retry Time Maximum      */
+#define MPC_P6 160 /* Hold Down Time              */
+#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
+
+/* MPC constants */
+
+#define MPC_C1 2   /* Retry Time Multiplier       */
+#define MPC_C2 60  /* Initial Keep-Alive Lifetime */
+
+/* Message types - to MPOA daemon */
+
+#define SND_MPOA_RES_RQST    201
+#define SET_MPS_CTRL_ADDR    202
+#define SND_MPOA_RES_RTRY    203 /* Different type in a retry due to req id         */
+#define STOP_KEEP_ALIVE_SM   204
+#define EGRESS_ENTRY_REMOVED 205
+#define SND_EGRESS_PURGE     206
+#define DIE                  207 /* tell the daemon to exit()                       */
+#define DATA_PLANE_PURGE     208 /* Data plane purge because of egress cache hit miss or dead MPS */
+#define OPEN_INGRESS_SVC     209
+
+/* Message types - from MPOA daemon */
+
+#define MPOA_TRIGGER_RCVD     101
+#define MPOA_RES_REPLY_RCVD   102
+#define INGRESS_PURGE_RCVD    103
+#define EGRESS_PURGE_RCVD     104
+#define MPS_DEATH             105
+#define CACHE_IMPOS_RCVD      106
+#define SET_MPC_CTRL_ADDR     107 /* Our MPC's control ATM address   */
+#define SET_MPS_MAC_ADDR      108
+#define CLEAN_UP_AND_EXIT     109
+#define SET_MPC_PARAMS        110 /* MPC configuration parameters    */
+
+/* Message types - bidirectional */       
+
+#define RELOAD                301 /* kill -HUP the daemon for reload */
+
+#endif /* _ATMMPC_H_ */
diff --git a/include/linux/atmppp.h b/include/linux/atmppp.h
new file mode 100644
index 000000000000..300dcce0c83f
--- /dev/null
+++ b/include/linux/atmppp.h
@@ -0,0 +1,24 @@
+/* atmppp.h - RFC2364 PPPoATM */
+
+/* Written 2000 by Mitchell Blank Jr */
+
+#ifndef _LINUX_ATMPPP_H
+#define _LINUX_ATMPPP_H
+
+#include <linux/atm.h>
+
+#define PPPOATM_ENCAPS_AUTODETECT	(0)
+#define PPPOATM_ENCAPS_VC		(1)
+#define PPPOATM_ENCAPS_LLC		(2)
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_ppp {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_PPP */
+	int		encaps;		/* PPPOATM_ENCAPS_* */
+};
+
+#endif	/* _LINUX_ATMPPP_H */
diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h
new file mode 100644
index 000000000000..799b104515d7
--- /dev/null
+++ b/include/linux/atmsap.h
@@ -0,0 +1,162 @@
+/* atmsap.h - ATM Service Access Point addressing definitions */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _LINUX_ATMSAP_H
+#define _LINUX_ATMSAP_H
+
+#include <linux/atmapi.h>
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+/*
+ * Layer 2 protocol identifiers
+ */
+
+/* BEGIN_L2 */
+#define ATM_L2_NONE	0	/* L2 not specified */
+#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
+#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
+#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
+#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
+#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
+#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
+#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
+#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
+#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
+#define ATM_L2_USER	0x10	/* user-specified */
+#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
+/* END_L2 */
+
+
+/*
+ * Layer 3 protocol identifiers
+ */
+
+/* BEGIN_L3 */
+#define ATM_L3_NONE	0	/* L3 not specified */
+#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
+#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
+#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
+#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
+#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
+#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
+#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
+#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
+#define ATM_L3_USER	0x10	/* user-specified */
+/* END_L3 */
+
+
+/*
+ * High layer identifiers
+ */
+
+/* BEGIN_HL */
+#define ATM_HL_NONE	0	/* HL not specified */
+#define ATM_HL_ISO	0x01	/* ISO */
+#define ATM_HL_USER	0x02	/* user-specific */
+#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
+#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
+/* END_HL */
+
+
+/*
+ * ITU-T coded mode of operation
+ */
+
+/* BEGIN_IMD */
+#define ATM_IMD_NONE	 0	/* mode not specified */
+#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
+#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
+/* END_IMD */
+
+/*
+ * H.310 code points
+ */
+
+#define ATM_TT_NONE	0	/* terminal type not specified */
+#define ATM_TT_RX	1	/* receive only */
+#define ATM_TT_TX	2	/* send only */
+#define ATM_TT_RXTX	3	/* receive and send */
+
+#define ATM_MC_NONE	0	/* no multiplexing */
+#define ATM_MC_TS	1	/* transport stream (TS) */
+#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
+#define ATM_MC_PS	3	/* program stream (PS) */
+#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
+#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
+
+/*
+ * SAP structures
+ */
+
+#define ATM_MAX_HLI	8	/* maximum high-layer information length */
+
+
+struct atm_blli {
+    unsigned char l2_proto;	/* layer 2 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user-specified l2 information */
+    } l2;
+    unsigned char l3_proto;	/* layer 3 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
+				    /* omit) */
+	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user specified l3 information */
+	struct {		      /* if l3_proto = ATM_L3_H310 */
+	    unsigned char term_type;  /* terminal type */
+	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	} h310;
+	struct {		  /* if l3_proto = ATM_L3_TR9577 */
+	    unsigned char ipi;	  /* initial protocol id */
+	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
+				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
+	} tr9577;
+    } l3;
+} __ATM_API_ALIGN;
+
+
+struct atm_bhli {
+    unsigned char hl_type;	/* high layer information type */
+    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
+				/* hl_type == ATM_HL_ISO) */
+    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
+};
+
+
+#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
+
+
+struct atm_sap {
+	struct atm_bhli bhli;		/* local SAP, high-layer information */
+	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
+					/* local SAP, low-layer info */
+};
+
+
+static __inline__ int blli_in_use(struct atm_blli blli)
+{
+	return blli.l2_proto || blli.l3_proto;
+}
+
+#endif
diff --git a/include/linux/atmsvc.h b/include/linux/atmsvc.h
new file mode 100644
index 000000000000..aa71583b8da7
--- /dev/null
+++ b/include/linux/atmsvc.h
@@ -0,0 +1,55 @@
+/* atmsvc.h - ATM signaling kernel-demon interface definitions */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMSVC_H
+#define _LINUX_ATMSVC_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
+				/* become ATM signaling demon control socket */
+
+enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
+		       as_listen, as_okay, as_error, as_indicate, as_close,
+		       as_itf_notify, as_modify, as_identify, as_terminate,
+		       as_addparty, as_dropparty };
+
+struct atmsvc_msg {
+	enum atmsvc_msg_type type;
+	atm_kptr_t vcc;
+	atm_kptr_t listen_vcc;		/* indicate */
+	int reply;			/* for okay and close:		   */
+					/*   < 0: error before active	   */
+					/*        (sigd has discarded ctx) */
+					/*   ==0: success		   */
+				        /*   > 0: error when active (still */
+					/*        need to close)	   */
+	struct sockaddr_atmpvc pvc;	/* indicate, okay (connect) */
+	struct sockaddr_atmsvc local;	/* local SVC address */
+	struct atm_qos qos;		/* QOS parameters */
+	struct atm_sap sap;		/* SAP */
+	unsigned int session;		/* for p2pm */
+	struct sockaddr_atmsvc svc;	/* SVC address */
+} __ATM_API_ALIGN;
+
+/*
+ * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
+ */
+
+/*
+ * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
+ * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
+ * tries to do better than that, but only if there's no routing decision (i.e.
+ * if signaling only uses one ATM interface).
+ */
+
+#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
+  (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
+  (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
+
+#endif
diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h
new file mode 100644
index 000000000000..af1010b6dab7
--- /dev/null
+++ b/include/linux/attribute_container.h
@@ -0,0 +1,73 @@
+/*
+ * class_container.h - a generic container for all classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _ATTRIBUTE_CONTAINER_H_
+#define _ATTRIBUTE_CONTAINER_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+
+struct attribute_container {
+	struct list_head	node;
+	struct list_head	containers;
+	struct class		*class;
+	struct class_device_attribute **attrs;
+	int (*match)(struct attribute_container *, struct device *);
+#define	ATTRIBUTE_CONTAINER_NO_CLASSDEVS	0x01
+	unsigned long		flags;
+};
+
+static inline int
+attribute_container_no_classdevs(struct attribute_container *atc)
+{
+	return atc->flags & ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+static inline void
+attribute_container_set_no_classdevs(struct attribute_container *atc)
+{
+	atc->flags |= ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+int attribute_container_register(struct attribute_container *cont);
+int attribute_container_unregister(struct attribute_container *cont);
+void attribute_container_create_device(struct device *dev,
+				       int (*fn)(struct attribute_container *,
+						 struct device *,
+						 struct class_device *));
+void attribute_container_add_device(struct device *dev,
+				    int (*fn)(struct attribute_container *,
+					      struct device *,
+					      struct class_device *));
+void attribute_container_remove_device(struct device *dev,
+				       void (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct class_device *));
+void attribute_container_device_trigger(struct device *dev, 
+					int (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct class_device *));
+void attribute_container_trigger(struct device *dev, 
+				 int (*fn)(struct attribute_container *,
+					   struct device *));
+int attribute_container_add_attrs(struct class_device *classdev);
+int attribute_container_add_class_device(struct class_device *classdev);
+int attribute_container_add_class_device_adapter(struct attribute_container *cont,
+						 struct device *dev,
+						 struct class_device *classdev);
+void attribute_container_remove_attrs(struct class_device *classdev);
+void attribute_container_class_device_del(struct class_device *classdev);
+
+
+
+
+
+
+struct class_device_attribute **attribute_container_classdev_to_attrs(const struct class_device *classdev);
+
+#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
new file mode 100644
index 000000000000..3628f7cfb178
--- /dev/null
+++ b/include/linux/audit.h
@@ -0,0 +1,196 @@
+/* audit.h -- Auditing support -*- linux-c -*-
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _LINUX_AUDIT_H_
+#define _LINUX_AUDIT_H_
+
+/* Request and reply types */
+#define AUDIT_GET      1000	/* Get status */
+#define AUDIT_SET      1001	/* Set status (enable/disable/auditd) */
+#define AUDIT_LIST     1002	/* List filtering rules */
+#define AUDIT_ADD      1003	/* Add filtering rule */
+#define AUDIT_DEL      1004	/* Delete filtering rule */
+#define AUDIT_USER     1005	/* Send a message from user-space */
+#define AUDIT_LOGIN    1006     /* Define the login id and informaiton */
+#define AUDIT_KERNEL   2000	/* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_PER_TASK 0x01	/* Apply rule at task creation (not syscall) */
+#define AUDIT_AT_ENTRY 0x02	/* Apply rule at syscall entry */
+#define AUDIT_AT_EXIT  0x04	/* Apply rule at syscall exit */
+#define AUDIT_PREPEND  0x10	/* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER    0	/* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
+#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS   64
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+/* Rule fields */
+				/* These are useful when checking the
+				 * task structure at task creation time
+				 * (AUDIT_PER_TASK).  */
+#define AUDIT_PID	0
+#define AUDIT_UID	1
+#define AUDIT_EUID	2
+#define AUDIT_SUID	3
+#define AUDIT_FSUID	4
+#define AUDIT_GID	5
+#define AUDIT_EGID	6
+#define AUDIT_SGID	7
+#define AUDIT_FSGID	8
+#define AUDIT_LOGINUID	9
+#define AUDIT_PERS	10
+
+				/* These are ONLY useful when checking
+				 * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR	100
+#define AUDIT_DEVMINOR	101
+#define AUDIT_INODE	102
+#define AUDIT_EXIT	103
+#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
+
+#define AUDIT_ARG0      200
+#define AUDIT_ARG1      (AUDIT_ARG0+1)
+#define AUDIT_ARG2      (AUDIT_ARG0+2)
+#define AUDIT_ARG3      (AUDIT_ARG0+3)
+
+#define AUDIT_NEGATE    0x80000000
+
+
+/* Status symbols */
+				/* Mask values */
+#define AUDIT_STATUS_ENABLED		0x0001
+#define AUDIT_STATUS_FAILURE		0x0002
+#define AUDIT_STATUS_PID		0x0004
+#define AUDIT_STATUS_RATE_LIMIT		0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
+				/* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT	0
+#define AUDIT_FAIL_PRINTK	1
+#define AUDIT_FAIL_PANIC	2
+
+#ifndef __KERNEL__
+struct audit_message {
+	struct nlmsghdr nlh;
+	char		data[1200];
+};
+#endif
+
+struct audit_status {
+	__u32		mask;		/* Bit mask for valid entries */
+	__u32		enabled;	/* 1 = enabled, 0 = disbaled */
+	__u32		failure;	/* Failure-to-log action */
+	__u32		pid;		/* pid of auditd process */
+	__u32		rate_limit;	/* messages rate limit (per second) */
+	__u32		backlog_limit;	/* waiting messages limit */
+	__u32		lost;		/* messages lost */
+	__u32		backlog;	/* messages waiting in queue */
+};
+
+struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE];
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+};
+
+#ifdef __KERNEL__
+
+struct audit_buffer;
+struct audit_context;
+struct inode;
+
+#ifdef CONFIG_AUDITSYSCALL
+/* These are defined in auditsc.c */
+				/* Public API */
+extern int  audit_alloc(struct task_struct *task);
+extern void audit_free(struct task_struct *task);
+extern void audit_syscall_entry(struct task_struct *task,
+				int major, unsigned long a0, unsigned long a1,
+				unsigned long a2, unsigned long a3);
+extern void audit_syscall_exit(struct task_struct *task, int return_code);
+extern void audit_getname(const char *name);
+extern void audit_putname(const char *name);
+extern void audit_inode(const char *name, const struct inode *inode);
+
+				/* Private API (for audit.c only) */
+extern int  audit_receive_filter(int type, int pid, int uid, int seq,
+				 void *data);
+extern void audit_get_stamp(struct audit_context *ctx,
+			    struct timespec *t, int *serial);
+extern int  audit_set_loginuid(struct audit_context *ctx, uid_t loginuid);
+extern uid_t audit_get_loginuid(struct audit_context *ctx);
+extern int audit_ipc_perms(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode);
+#else
+#define audit_alloc(t) ({ 0; })
+#define audit_free(t) do { ; } while (0)
+#define audit_syscall_entry(t,a,b,c,d,e) do { ; } while (0)
+#define audit_syscall_exit(t,r) do { ; } while (0)
+#define audit_getname(n) do { ; } while (0)
+#define audit_putname(n) do { ; } while (0)
+#define audit_inode(n,i) do { ; } while (0)
+#define audit_get_loginuid(c) ({ -1; })
+#define audit_ipc_perms(q,u,g,m) ({ 0; })
+#endif
+
+#ifdef CONFIG_AUDIT
+/* These are defined in audit.c */
+				/* Public API */
+extern void		    audit_log(struct audit_context *ctx,
+				      const char *fmt, ...)
+			    __attribute__((format(printf,2,3)));
+
+extern struct audit_buffer *audit_log_start(struct audit_context *ctx);
+extern void		    audit_log_format(struct audit_buffer *ab,
+					     const char *fmt, ...)
+			    __attribute__((format(printf,2,3)));
+extern void		    audit_log_end(struct audit_buffer *ab);
+extern void		    audit_log_d_path(struct audit_buffer *ab,
+					     const char *prefix,
+					     struct dentry *dentry,
+					     struct vfsmount *vfsmnt);
+
+				/* Private API (for auditsc.c only) */
+extern void		    audit_send_reply(int pid, int seq, int type,
+					     int done, int multi,
+					     void *payload, int size);
+extern void		    audit_log_lost(const char *message);
+#else
+#define audit_log(t,f,...) do { ; } while (0)
+#define audit_log_start(t) ({ NULL; })
+#define audit_log_vformat(b,f,a) do { ; } while (0)
+#define audit_log_format(b,f,...) do { ; } while (0)
+#define audit_log_end(b) do { ; } while (0)
+#define audit_log_d_path(b,p,d,v) do { ; } while (0)
+#endif
+#endif
+#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
new file mode 100644
index 000000000000..c21e5972a3e8
--- /dev/null
+++ b/include/linux/auto_fs.h
@@ -0,0 +1,84 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *   
+ * linux/include/linux/auto_fs.h
+ *
+ *   Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _LINUX_AUTO_FS_H
+#define _LINUX_AUTO_FS_H
+
+#ifdef __KERNEL__
+#include <linux/fs.h>
+#include <linux/limits.h>
+#include <asm/types.h>
+#endif /* __KERNEL__ */
+
+#include <linux/ioctl.h>
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION	3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this.  This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode     32 bit    64 bit
+ * -------------------------
+ * int      32 bit    32 bit
+ * long     32 bit    64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing	0	/* Missing entry (mount request) */
+#define autofs_ptype_expire	1	/* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+	int proto_version;		/* Protocol version */
+	int type;			/* Type of packet */
+};
+
+struct autofs_packet_missing {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};	
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+	struct autofs_packet_hdr hdr;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY      _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
new file mode 100644
index 000000000000..d1c7b0ec7c22
--- /dev/null
+++ b/include/linux/auto_fs4.h
@@ -0,0 +1,57 @@
+/* -*- c -*-
+ * linux/include/linux/auto_fs4.h
+ *
+ * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_AUTO_FS4_H
+#define _LINUX_AUTO_FS4_H
+
+/* Include common v3 definitions */
+#include <linux/auto_fs.h>
+
+/* autofs v4 definitions */
+#undef AUTOFS_PROTO_VERSION
+#undef AUTOFS_MIN_PROTO_VERSION
+#undef AUTOFS_MAX_PROTO_VERSION
+
+#define AUTOFS_PROTO_VERSION		4
+#define AUTOFS_MIN_PROTO_VERSION	3
+#define AUTOFS_MAX_PROTO_VERSION	4
+
+#define AUTOFS_PROTO_SUBVERSION         5
+
+/* Mask for expire behaviour */
+#define AUTOFS_EXP_IMMEDIATE		1
+#define AUTOFS_EXP_LEAVES		2
+
+/* New message type */
+#define autofs_ptype_expire_multi	2	/* Expire entry (umount request) */
+
+/* v4 multi expire (via pipe) */
+struct autofs_packet_expire_multi {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+union autofs_packet_union {
+	struct autofs_packet_hdr hdr;
+	struct autofs_packet_missing missing;
+	struct autofs_packet_expire expire;
+	struct autofs_packet_expire_multi expire_multi;
+};
+
+#define AUTOFS_IOC_EXPIRE_MULTI		_IOW(0x93,0x66,int)
+#define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
+#define AUTOFS_IOC_ASKREGHOST           _IOR(0x93,0x68,int)
+#define AUTOFS_IOC_TOGGLEREGHOST        _IOR(0x93,0x69,int)
+#define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
+
+
+#endif /* _LINUX_AUTO_FS4_H */
diff --git a/include/linux/awe_voice.h b/include/linux/awe_voice.h
new file mode 100644
index 000000000000..da0e27de752c
--- /dev/null
+++ b/include/linux/awe_voice.h
@@ -0,0 +1,525 @@
+/*
+ * sound/awe_voice.h
+ *
+ * Voice information definitions for the low level driver for the 
+ * AWE32/SB32/AWE64 wave table synth.
+ *   version 0.4.4; Jan. 4, 2000
+ *
+ * Copyright (C) 1996-2000 Takashi Iwai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef AWE_VOICE_H
+#define AWE_VOICE_H
+
+#ifndef SAMPLE_TYPE_AWE32
+#define SAMPLE_TYPE_AWE32	0x20
+#endif
+
+#ifndef _PATCHKEY
+#define _PATCHKEY(id) ((id<<8)|0xfd)
+#endif
+
+/*----------------------------------------------------------------
+ * patch information record
+ *----------------------------------------------------------------*/
+
+/* patch interface header: 16 bytes */
+typedef struct awe_patch_info {
+	short key;			/* use AWE_PATCH here */
+#define AWE_PATCH	_PATCHKEY(0x07)
+
+	short device_no;		/* synthesizer number */
+	unsigned short sf_id;		/* file id (should be zero) */
+	short optarg;			/* optional argument */
+	int len;			/* data length (without this header) */
+
+	short type;			/* patch operation type */
+#define AWE_LOAD_INFO		0	/* awe_voice_rec */
+#define AWE_LOAD_DATA		1	/* awe_sample_info */
+#define AWE_OPEN_PATCH		2	/* awe_open_parm */
+#define AWE_CLOSE_PATCH		3	/* none */
+#define AWE_UNLOAD_PATCH	4	/* none */
+#define AWE_REPLACE_DATA	5	/* awe_sample_info (optarg=#channels)*/
+#define AWE_MAP_PRESET		6	/* awe_voice_map */
+/*#define AWE_PROBE_INFO	7*/	/* awe_voice_map (pat only) */
+#define AWE_PROBE_DATA		8	/* optarg=sample */
+#define AWE_REMOVE_INFO		9	/* optarg=(bank<<8)|instr */
+#define AWE_LOAD_CHORUS_FX	0x10	/* awe_chorus_fx_rec (optarg=mode) */
+#define AWE_LOAD_REVERB_FX	0x11	/* awe_reverb_fx_rec (optarg=mode) */
+
+	short reserved;			/* word alignment data */
+
+	/* the actual patch data begins after this */
+#if defined(AWE_COMPAT_030) && AWE_COMPAT_030
+	char data[0];
+#endif
+} awe_patch_info;
+
+/*#define AWE_PATCH_INFO_SIZE	16*/
+#define AWE_PATCH_INFO_SIZE	sizeof(awe_patch_info)
+
+
+/*----------------------------------------------------------------
+ * open patch
+ *----------------------------------------------------------------*/
+
+#define AWE_PATCH_NAME_LEN	32
+
+typedef struct _awe_open_parm {
+	unsigned short type;		/* sample type */
+#define AWE_PAT_TYPE_MISC	0
+#define AWE_PAT_TYPE_GM		1
+#define AWE_PAT_TYPE_GS		2
+#define AWE_PAT_TYPE_MT32	3
+#define AWE_PAT_TYPE_XG		4
+#define AWE_PAT_TYPE_SFX	5
+#define AWE_PAT_TYPE_GUS	6
+#define AWE_PAT_TYPE_MAP	7
+
+#define AWE_PAT_LOCKED		0x100	/* lock the samples */
+#define AWE_PAT_SHARED		0x200	/* sample is shared */
+
+	short reserved;
+	char name[AWE_PATCH_NAME_LEN];
+} awe_open_parm;
+
+/*#define AWE_OPEN_PARM_SIZE	28*/
+#define AWE_OPEN_PARM_SIZE	sizeof(awe_open_parm)
+
+
+/*----------------------------------------------------------------
+ * raw voice information record
+ *----------------------------------------------------------------*/
+
+/* wave table envelope & effect parameters to control EMU8000 */
+typedef struct _awe_voice_parm {
+	unsigned short moddelay;	/* modulation delay (0x8000) */
+	unsigned short modatkhld;	/* modulation attack & hold time (0x7f7f) */
+	unsigned short moddcysus;	/* modulation decay & sustain (0x7f7f) */
+	unsigned short modrelease;	/* modulation release time (0x807f) */
+	short modkeyhold, modkeydecay;	/* envelope change per key (not used) */
+	unsigned short voldelay;	/* volume delay (0x8000) */
+	unsigned short volatkhld;	/* volume attack & hold time (0x7f7f) */
+	unsigned short voldcysus;	/* volume decay & sustain (0x7f7f) */
+	unsigned short volrelease;	/* volume release time (0x807f) */
+	short volkeyhold, volkeydecay;	/* envelope change per key (not used) */
+	unsigned short lfo1delay;	/* LFO1 delay (0x8000) */
+	unsigned short lfo2delay;	/* LFO2 delay (0x8000) */
+	unsigned short pefe;		/* modulation pitch & cutoff (0x0000) */
+	unsigned short fmmod;		/* LFO1 pitch & cutoff (0x0000) */
+	unsigned short tremfrq;		/* LFO1 volume & freq (0x0000) */
+	unsigned short fm2frq2;		/* LFO2 pitch & freq (0x0000) */
+	unsigned char cutoff;		/* initial cutoff (0xff) */
+	unsigned char filterQ;		/* initial filter Q [0-15] (0x0) */
+	unsigned char chorus;		/* chorus send (0x00) */
+	unsigned char reverb;		/* reverb send (0x00) */
+	unsigned short reserved[4];	/* not used */
+} awe_voice_parm;
+
+typedef struct _awe_voice_parm_block {
+	unsigned short moddelay;	/* modulation delay (0x8000) */
+	unsigned char modatk, modhld;
+	unsigned char moddcy, modsus;
+	unsigned char modrel, moddummy;
+	short modkeyhold, modkeydecay;	/* envelope change per key (not used) */
+	unsigned short voldelay;	/* volume delay (0x8000) */
+	unsigned char volatk, volhld;
+	unsigned char voldcy, volsus;
+	unsigned char volrel, voldummy;
+	short volkeyhold, volkeydecay;	/* envelope change per key (not used) */
+	unsigned short lfo1delay;	/* LFO1 delay (0x8000) */
+	unsigned short lfo2delay;	/* LFO2 delay (0x8000) */
+	unsigned char env1fc, env1pit;
+	unsigned char lfo1fc, lfo1pit;
+	unsigned char lfo1freq, lfo1vol;
+	unsigned char lfo2freq, lfo2pit;
+	unsigned char cutoff;		/* initial cutoff (0xff) */
+	unsigned char filterQ;		/* initial filter Q [0-15] (0x0) */
+	unsigned char chorus;		/* chorus send (0x00) */
+	unsigned char reverb;		/* reverb send (0x00) */
+	unsigned short reserved[4];	/* not used */
+} awe_voice_parm_block;
+
+#define AWE_VOICE_PARM_SIZE	48
+
+
+/* wave table parameters: 92 bytes */
+typedef struct _awe_voice_info {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* sample offset correction */
+	int loopstart, loopend;		/* loop offset correction */
+	short rate_offset;		/* sample rate pitch offset */
+	unsigned short mode;		/* sample mode */
+#define AWE_MODE_ROMSOUND		0x8000
+#define AWE_MODE_STEREO			1
+#define AWE_MODE_LOOPING		2
+#define AWE_MODE_NORELEASE		4	/* obsolete */
+#define AWE_MODE_INIT_PARM		8
+
+	short root;			/* midi root key */
+	short tune;			/* pitch tuning (in cents) */
+	signed char low, high;		/* key note range */
+	signed char vellow, velhigh;	/* velocity range */
+	signed char fixkey, fixvel;	/* fixed key, velocity */
+	signed char pan, fixpan;	/* panning, fixed panning */
+	short exclusiveClass;		/* exclusive class (0 = none) */
+	unsigned char amplitude;	/* sample volume (127 max) */
+	unsigned char attenuation;	/* attenuation (0.375dB) */
+	short scaleTuning;		/* pitch scale tuning(%), normally 100 */
+	awe_voice_parm parm;		/* voice envelope parameters */
+	short index;			/* internal index (set by driver) */
+} awe_voice_info;
+
+/*#define AWE_VOICE_INFO_SIZE	92*/
+#define AWE_VOICE_INFO_SIZE	sizeof(awe_voice_info)
+
+/*----------------------------------------------------------------*/
+
+/* The info entry of awe_voice_rec is changed from 0 to 1
+ * for some compilers refusing zero size array.
+ * Due to this change, sizeof(awe_voice_rec) becomes different
+ * from older versions.
+ * Use AWE_VOICE_REC_SIZE instead.
+ */
+
+/* instrument info header: 4 bytes */
+typedef struct _awe_voice_rec_hdr {
+	unsigned char bank;		/* midi bank number */
+	unsigned char instr;		/* midi preset number */
+	char nvoices;			/* number of voices */
+	char write_mode;		/* write mode; normally 0 */
+#define AWE_WR_APPEND		0	/* append anyway */
+#define AWE_WR_EXCLUSIVE	1	/* skip if already exists */
+#define AWE_WR_REPLACE		2	/* replace if already exists */
+} awe_voice_rec_hdr;
+
+/*#define AWE_VOICE_REC_SIZE	4*/
+#define AWE_VOICE_REC_SIZE	sizeof(awe_voice_rec_hdr)
+
+/* the standard patch structure for one sample */
+typedef struct _awe_voice_rec_patch {
+	awe_patch_info		patch;
+	awe_voice_rec_hdr	hdr;
+	awe_voice_info		info;
+} awe_voice_rec_patch;
+
+
+/* obsolete data type */
+#if defined(AWE_COMPAT_030) && AWE_COMPAT_030
+#define AWE_INFOARRAY_SIZE	0
+#else
+#define AWE_INFOARRAY_SIZE	1
+#endif
+
+typedef struct _awe_voice_rec {
+	unsigned char bank;		/* midi bank number */
+	unsigned char instr;		/* midi preset number */
+	short nvoices;			/* number of voices */
+	/* voice information follows here */
+	awe_voice_info info[AWE_INFOARRAY_SIZE];
+} awe_voice_rec;
+
+
+/*----------------------------------------------------------------
+ * sample wave information
+ *----------------------------------------------------------------*/
+
+/* wave table sample header: 32 bytes */
+typedef struct awe_sample_info {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* start & end offset */
+	int loopstart, loopend;		/* loop start & end offset */
+	int size;			/* size (0 = ROM) */
+	short checksum_flag;		/* use check sum = 1 */
+	unsigned short mode_flags;	/* mode flags */
+#define AWE_SAMPLE_8BITS	1	/* wave data is 8bits */
+#define AWE_SAMPLE_UNSIGNED	2	/* wave data is unsigned */
+#define AWE_SAMPLE_NO_BLANK	4	/* no blank loop is attached */
+#define AWE_SAMPLE_SINGLESHOT	8	/* single-shot w/o loop */
+#define AWE_SAMPLE_BIDIR_LOOP	16	/* bidirectional looping */
+#define AWE_SAMPLE_STEREO_LEFT	32	/* stereo left sound */
+#define AWE_SAMPLE_STEREO_RIGHT	64	/* stereo right sound */
+#define AWE_SAMPLE_REVERSE_LOOP 128	/* reverse looping */
+	unsigned int checksum;		/* check sum */
+#if defined(AWE_COMPAT_030) && AWE_COMPAT_030
+	unsigned short data[0];		/* sample data follows here */
+#endif
+} awe_sample_info;
+
+/*#define AWE_SAMPLE_INFO_SIZE	32*/
+#define AWE_SAMPLE_INFO_SIZE	sizeof(awe_sample_info)
+
+
+/*----------------------------------------------------------------
+ * voice preset mapping
+ *----------------------------------------------------------------*/
+
+typedef struct awe_voice_map {
+	int map_bank, map_instr, map_key;	/* key = -1 means all keys */
+	int src_bank, src_instr, src_key;
+} awe_voice_map;
+
+#define AWE_VOICE_MAP_SIZE	sizeof(awe_voice_map)
+
+
+/*----------------------------------------------------------------
+ * awe hardware controls
+ *----------------------------------------------------------------*/
+
+#define _AWE_DEBUG_MODE			0x00
+#define _AWE_REVERB_MODE		0x01
+#define _AWE_CHORUS_MODE		0x02
+#define _AWE_REMOVE_LAST_SAMPLES	0x03
+#define _AWE_INITIALIZE_CHIP		0x04
+#define _AWE_SEND_EFFECT		0x05
+#define _AWE_TERMINATE_CHANNEL		0x06
+#define _AWE_TERMINATE_ALL		0x07
+#define _AWE_INITIAL_VOLUME		0x08
+#define _AWE_INITIAL_ATTEN	_AWE_INITIAL_VOLUME
+#define _AWE_RESET_CHANNEL		0x09
+#define _AWE_CHANNEL_MODE		0x0a
+#define _AWE_DRUM_CHANNELS		0x0b
+#define _AWE_MISC_MODE			0x0c
+#define _AWE_RELEASE_ALL		0x0d
+#define _AWE_NOTEOFF_ALL		0x0e
+#define _AWE_CHN_PRESSURE		0x0f
+/*#define _AWE_GET_CURRENT_MODE		0x10*/
+#define _AWE_EQUALIZER			0x11
+/*#define _AWE_GET_MISC_MODE		0x12*/
+/*#define _AWE_GET_FONTINFO		0x13*/
+
+#define _AWE_MODE_FLAG			0x80
+#define _AWE_COOKED_FLAG		0x40	/* not supported */
+#define _AWE_MODE_VALUE_MASK		0x3F
+
+/*----------------------------------------------------------------*/
+
+#define _AWE_SET_CMD(p,dev,voice,cmd,p1,p2) \
+{((char*)(p))[0] = SEQ_PRIVATE;\
+ ((char*)(p))[1] = dev;\
+ ((char*)(p))[2] = _AWE_MODE_FLAG|(cmd);\
+ ((char*)(p))[3] = voice;\
+ ((unsigned short*)(p))[2] = p1;\
+ ((unsigned short*)(p))[3] = p2;}
+
+/* buffered access */
+#define _AWE_CMD(dev, voice, cmd, p1, p2) \
+{_SEQ_NEEDBUF(8);\
+ _AWE_SET_CMD(_seqbuf + _seqbufptr, dev, voice, cmd, p1, p2);\
+ _SEQ_ADVBUF(8);}
+
+/* direct access */
+#define _AWE_CMD_NOW(seqfd,dev,voice,cmd,p1,p2) \
+{struct seq_event_rec tmp;\
+ _AWE_SET_CMD(&tmp, dev, voice, cmd, p1, p2);\
+ ioctl(seqfd, SNDCTL_SEQ_OUTOFBAND, &tmp);}
+
+/*----------------------------------------------------------------*/
+
+/* set debugging mode */
+#define AWE_DEBUG_MODE(dev,p1)	_AWE_CMD(dev, 0, _AWE_DEBUG_MODE, p1, 0)
+/* set reverb mode; from 0 to 7 */
+#define AWE_REVERB_MODE(dev,p1)	_AWE_CMD(dev, 0, _AWE_REVERB_MODE, p1, 0)
+/* set chorus mode; from 0 to 7 */
+#define AWE_CHORUS_MODE(dev,p1)	_AWE_CMD(dev, 0, _AWE_CHORUS_MODE, p1, 0)
+
+/* reset channel */
+#define AWE_RESET_CHANNEL(dev,ch) _AWE_CMD(dev, ch, _AWE_RESET_CHANNEL, 0, 0)
+#define AWE_RESET_CONTROL(dev,ch) _AWE_CMD(dev, ch, _AWE_RESET_CHANNEL, 1, 0)
+
+/* send an effect to all layers */
+#define AWE_SEND_EFFECT(dev,voice,type,value) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,type,value)
+#define AWE_ADD_EFFECT(dev,voice,type,value) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,((type)|0x80),value)
+#define AWE_UNSET_EFFECT(dev,voice,type) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,((type)|0x40),0)
+/* send an effect to a layer */
+#define AWE_SEND_LAYER_EFFECT(dev,voice,layer,type,value) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,((layer+1)<<8|(type)),value)
+#define AWE_ADD_LAYER_EFFECT(dev,voice,layer,type,value) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,((layer+1)<<8|(type)|0x80),value)
+#define AWE_UNSET_LAYER_EFFECT(dev,voice,layer,type) _AWE_CMD(dev,voice,_AWE_SEND_EFFECT,((layer+1)<<8|(type)|0x40),0)
+
+/* terminate sound on the channel/voice */
+#define AWE_TERMINATE_CHANNEL(dev,voice) _AWE_CMD(dev,voice,_AWE_TERMINATE_CHANNEL,0,0)
+/* terminate all sounds */
+#define AWE_TERMINATE_ALL(dev) _AWE_CMD(dev, 0, _AWE_TERMINATE_ALL, 0, 0)
+/* release all sounds (w/o sustain effect) */
+#define AWE_RELEASE_ALL(dev) _AWE_CMD(dev, 0, _AWE_RELEASE_ALL, 0, 0)
+/* note off all sounds (w sustain effect) */
+#define AWE_NOTEOFF_ALL(dev) _AWE_CMD(dev, 0, _AWE_NOTEOFF_ALL, 0, 0)
+
+/* set initial attenuation */
+#define AWE_INITIAL_VOLUME(dev,atten) _AWE_CMD(dev, 0, _AWE_INITIAL_VOLUME, atten, 0)
+#define AWE_INITIAL_ATTEN  AWE_INITIAL_VOLUME
+/* relative attenuation */
+#define AWE_SET_ATTEN(dev,atten)  _AWE_CMD(dev, 0, _AWE_INITIAL_VOLUME, atten, 1)
+
+/* set channel playing mode; mode=0/1/2 */
+#define AWE_SET_CHANNEL_MODE(dev,mode) _AWE_CMD(dev, 0, _AWE_CHANNEL_MODE, mode, 0)
+#define AWE_PLAY_INDIRECT	0	/* indirect voice mode (default) */
+#define AWE_PLAY_MULTI		1	/* multi note voice mode */
+#define AWE_PLAY_DIRECT		2	/* direct single voice mode */
+#define AWE_PLAY_MULTI2		3	/* sequencer2 mode; used internally */
+
+/* set drum channel mask; channels is 32bit long value */
+#define AWE_DRUM_CHANNELS(dev,channels) _AWE_CMD(dev, 0, _AWE_DRUM_CHANNELS, ((channels) & 0xffff), ((channels) >> 16))
+
+/* set bass and treble control; values are from 0 to 11 */
+#define AWE_EQUALIZER(dev,bass,treble) _AWE_CMD(dev, 0, _AWE_EQUALIZER, bass, treble)
+
+/* remove last loaded samples */
+#define AWE_REMOVE_LAST_SAMPLES(seqfd,dev) _AWE_CMD_NOW(seqfd, dev, 0, _AWE_REMOVE_LAST_SAMPLES, 0, 0)
+/* initialize emu8000 chip */
+#define AWE_INITIALIZE_CHIP(seqfd,dev) _AWE_CMD_NOW(seqfd, dev, 0, _AWE_INITIALIZE_CHIP, 0, 0)
+
+/* set miscellaneous modes; meta command */
+#define AWE_MISC_MODE(dev,mode,value) _AWE_CMD(dev, 0, _AWE_MISC_MODE, mode, value)
+/* exclusive sound off; 1=off */
+#define AWE_EXCLUSIVE_SOUND(dev,mode) AWE_MISC_MODE(dev,AWE_MD_EXCLUSIVE_SOUND,mode)
+/* default GUS bank number */
+#define AWE_SET_GUS_BANK(dev,bank) AWE_MISC_MODE(dev,AWE_MD_GUS_BANK,bank)
+/* change panning position in realtime; 0=don't 1=do */
+#define AWE_REALTIME_PAN(dev,mode) AWE_MISC_MODE(dev,AWE_MD_REALTIME_PAN,mode)
+
+/* extended pressure controls; not portable with other sound drivers */
+#define AWE_KEY_PRESSURE(dev,ch,note,vel) SEQ_START_NOTE(dev,ch,(note)+128,vel)
+#define AWE_CHN_PRESSURE(dev,ch,vel) _AWE_CMD(dev,ch,_AWE_CHN_PRESSURE,vel,0)
+
+/*----------------------------------------------------------------*/
+
+/* reverb mode parameters */
+#define	AWE_REVERB_ROOM1	0
+#define AWE_REVERB_ROOM2	1
+#define	AWE_REVERB_ROOM3	2
+#define	AWE_REVERB_HALL1	3
+#define	AWE_REVERB_HALL2	4
+#define	AWE_REVERB_PLATE	5
+#define	AWE_REVERB_DELAY	6
+#define	AWE_REVERB_PANNINGDELAY 7
+#define AWE_REVERB_PREDEFINED	8
+/* user can define reverb modes up to 32 */
+#define AWE_REVERB_NUMBERS	32
+
+typedef struct awe_reverb_fx_rec {
+	unsigned short parms[28];
+} awe_reverb_fx_rec;
+
+/*----------------------------------------------------------------*/
+
+/* chorus mode parameters */
+#define AWE_CHORUS_1		0
+#define	AWE_CHORUS_2		1
+#define	AWE_CHORUS_3		2
+#define	AWE_CHORUS_4		3
+#define	AWE_CHORUS_FEEDBACK	4
+#define	AWE_CHORUS_FLANGER	5
+#define	AWE_CHORUS_SHORTDELAY	6
+#define	AWE_CHORUS_SHORTDELAY2	7
+#define AWE_CHORUS_PREDEFINED	8
+/* user can define chorus modes up to 32 */
+#define AWE_CHORUS_NUMBERS	32
+
+typedef struct awe_chorus_fx_rec {
+	unsigned short feedback;	/* feedback level (0xE600-0xE6FF) */
+	unsigned short delay_offset;	/* delay (0-0x0DA3) [1/44100 sec] */
+	unsigned short lfo_depth;	/* LFO depth (0xBC00-0xBCFF) */
+	unsigned int delay;	/* right delay (0-0xFFFFFFFF) [1/256/44100 sec] */
+	unsigned int lfo_freq;		/* LFO freq LFO freq (0-0xFFFFFFFF) */
+} awe_chorus_fx_rec;
+
+/*----------------------------------------------------------------*/
+
+/* misc mode types */
+enum {
+/* 0*/	AWE_MD_EXCLUSIVE_OFF,	/* obsolete */
+/* 1*/	AWE_MD_EXCLUSIVE_ON,	/* obsolete */
+/* 2*/	AWE_MD_VERSION,		/* read only */
+/* 3*/	AWE_MD_EXCLUSIVE_SOUND,	/* 0/1: exclusive note on (default=1) */
+/* 4*/	AWE_MD_REALTIME_PAN,	/* 0/1: do realtime pan change (default=1) */
+/* 5*/	AWE_MD_GUS_BANK,	/* bank number for GUS patches (default=0) */
+/* 6*/	AWE_MD_KEEP_EFFECT,	/* 0/1: keep effect values, (default=0) */
+/* 7*/	AWE_MD_ZERO_ATTEN,	/* attenuation of max volume (default=32) */
+/* 8*/	AWE_MD_CHN_PRIOR,	/* 0/1: set MIDI channel priority mode (default=1) */
+/* 9*/	AWE_MD_MOD_SENSE,	/* integer: modwheel sensitivity (def=18) */
+/*10*/	AWE_MD_DEF_PRESET,	/* integer: default preset number (def=0) */
+/*11*/	AWE_MD_DEF_BANK,	/* integer: default bank number (def=0) */
+/*12*/	AWE_MD_DEF_DRUM,	/* integer: default drumset number (def=0) */
+/*13*/	AWE_MD_TOGGLE_DRUM_BANK, /* 0/1: toggle drum flag with bank# (def=0) */
+/*14*/	AWE_MD_NEW_VOLUME_CALC,	/* 0/1: volume calculation mode (def=1) */
+/*15*/	AWE_MD_CHORUS_MODE,	/* integer: chorus mode (def=2) */
+/*16*/	AWE_MD_REVERB_MODE,	/* integer: chorus mode (def=4) */
+/*17*/	AWE_MD_BASS_LEVEL,	/* integer: bass level (def=5) */
+/*18*/	AWE_MD_TREBLE_LEVEL,	/* integer: treble level (def=9) */
+/*19*/	AWE_MD_DEBUG_MODE,	/* integer: debug level (def=0) */
+/*20*/	AWE_MD_PAN_EXCHANGE,	/* 0/1: exchange panning direction (def=0) */
+	AWE_MD_END,
+};
+
+/*----------------------------------------------------------------*/
+
+/* effect parameters */
+enum {
+
+/* modulation envelope parameters */
+/* 0*/	AWE_FX_ENV1_DELAY,	/* WORD: ENVVAL */
+/* 1*/	AWE_FX_ENV1_ATTACK,	/* BYTE: up ATKHLD */
+/* 2*/	AWE_FX_ENV1_HOLD,	/* BYTE: lw ATKHLD */
+/* 3*/	AWE_FX_ENV1_DECAY,	/* BYTE: lw DCYSUS */
+/* 4*/	AWE_FX_ENV1_RELEASE,	/* BYTE: lw DCYSUS */
+/* 5*/	AWE_FX_ENV1_SUSTAIN,	/* BYTE: up DCYSUS */
+/* 6*/	AWE_FX_ENV1_PITCH,	/* BYTE: up PEFE */
+/* 7*/	AWE_FX_ENV1_CUTOFF,	/* BYTE: lw PEFE */
+
+/* volume envelope parameters */
+/* 8*/	AWE_FX_ENV2_DELAY,	/* WORD: ENVVOL */
+/* 9*/	AWE_FX_ENV2_ATTACK,	/* BYTE: up ATKHLDV */
+/*10*/	AWE_FX_ENV2_HOLD,	/* BYTE: lw ATKHLDV */
+/*11*/	AWE_FX_ENV2_DECAY,	/* BYTE: lw DCYSUSV */
+/*12*/	AWE_FX_ENV2_RELEASE,	/* BYTE: lw DCYSUSV */
+/*13*/	AWE_FX_ENV2_SUSTAIN,	/* BYTE: up DCYSUSV */
+	
+/* LFO1 (tremolo & vibrato) parameters */
+/*14*/	AWE_FX_LFO1_DELAY,	/* WORD: LFO1VAL */
+/*15*/	AWE_FX_LFO1_FREQ,	/* BYTE: lo TREMFRQ */
+/*16*/	AWE_FX_LFO1_VOLUME,	/* BYTE: up TREMFRQ */
+/*17*/	AWE_FX_LFO1_PITCH,	/* BYTE: up FMMOD */
+/*18*/	AWE_FX_LFO1_CUTOFF,	/* BYTE: lo FMMOD */
+
+/* LFO2 (vibrato) parameters */
+/*19*/	AWE_FX_LFO2_DELAY,	/* WORD: LFO2VAL */
+/*20*/	AWE_FX_LFO2_FREQ,	/* BYTE: lo FM2FRQ2 */
+/*21*/	AWE_FX_LFO2_PITCH,	/* BYTE: up FM2FRQ2 */
+
+/* Other overall effect parameters */
+/*22*/	AWE_FX_INIT_PITCH,	/* SHORT: pitch offset */
+/*23*/	AWE_FX_CHORUS,		/* BYTE: chorus effects send (0-255) */
+/*24*/	AWE_FX_REVERB,		/* BYTE: reverb effects send (0-255) */
+/*25*/	AWE_FX_CUTOFF,		/* BYTE: up IFATN */
+/*26*/	AWE_FX_FILTERQ,		/* BYTE: up CCCA */
+
+/* Sample / loop offset changes */
+/*27*/	AWE_FX_SAMPLE_START,	/* SHORT: offset */
+/*28*/	AWE_FX_LOOP_START,	/* SHORT: offset */
+/*29*/	AWE_FX_LOOP_END,	/* SHORT: offset */
+/*30*/	AWE_FX_COARSE_SAMPLE_START,	/* SHORT: upper word offset */
+/*31*/	AWE_FX_COARSE_LOOP_START,	/* SHORT: upper word offset */
+/*32*/	AWE_FX_COARSE_LOOP_END,		/* SHORT: upper word offset */
+/*33*/	AWE_FX_ATTEN,		/* BYTE: lo IFATN */
+
+	AWE_FX_END,
+};
+
+#endif /* AWE_VOICE_H */
diff --git a/include/linux/ax25.h b/include/linux/ax25.h
new file mode 100644
index 000000000000..56c11f0dbd80
--- /dev/null
+++ b/include/linux/ax25.h
@@ -0,0 +1,116 @@
+/*
+ * These are the public elements of the Linux kernel AX.25 code. A similar
+ * file netrom.h exists for the NET/ROM protocol.
+ */
+
+#ifndef	AX25_KERNEL_H
+#define	AX25_KERNEL_H
+
+#include <linux/socket.h>
+
+#define AX25_MTU	256
+#define AX25_MAX_DIGIS  8
+
+#define AX25_WINDOW	1
+#define AX25_T1		2
+#define AX25_N2		3
+#define AX25_T3		4
+#define AX25_T2		5
+#define	AX25_BACKOFF	6
+#define	AX25_EXTSEQ	7
+#define	AX25_PIDINCL	8
+#define AX25_IDLE	9
+#define AX25_PACLEN	10
+#define AX25_IAMDIGI	12
+
+#define AX25_KILL	99
+
+#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
+#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
+#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
+#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
+#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
+#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
+#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
+#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
+#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
+#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
+#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)
+
+#define AX25_SET_RT_IPMODE	2
+
+#define AX25_NOUID_DEFAULT	0
+#define AX25_NOUID_BLOCK	1
+
+typedef struct {
+	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
+} ax25_address;
+
+struct sockaddr_ax25 {
+	sa_family_t	sax25_family;
+	ax25_address	sax25_call;
+	int		sax25_ndigis;
+	/* Digipeater ax25_address sets follow */
+};
+
+#define sax25_uid	sax25_ndigis
+
+struct full_sockaddr_ax25 {
+	struct sockaddr_ax25 fsa_ax25;
+	ax25_address	fsa_digipeater[AX25_MAX_DIGIS];
+};
+
+struct ax25_routes_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	unsigned char	digi_count;
+	ax25_address	digi_addr[AX25_MAX_DIGIS];
+};
+
+struct ax25_route_opt_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	int		cmd;
+	int		arg;
+};
+
+struct ax25_ctl_struct {
+        ax25_address            port_addr;
+        ax25_address            source_addr;
+        ax25_address            dest_addr;
+        unsigned int            cmd;
+        unsigned long           arg;
+        unsigned char           digi_count;
+        ax25_address            digi_addr[AX25_MAX_DIGIS];
+};
+
+/* this will go away. Please do not export to user land */
+struct ax25_info_struct_deprecated {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+};
+
+struct ax25_info_struct {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+	unsigned int	vs, vr, va, vs_max;
+	unsigned int	paclen;
+	unsigned int	window;
+};
+
+struct ax25_fwd_struct {
+	ax25_address	port_from;
+	ax25_address	port_to;
+};
+
+#endif
diff --git a/include/linux/b1lli.h b/include/linux/b1lli.h
new file mode 100644
index 000000000000..713f712685d3
--- /dev/null
+++ b/include/linux/b1lli.h
@@ -0,0 +1,73 @@
+/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * ISDN lowlevel-module for AVM B1-card.
+ *
+ * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _B1LLI_H_
+#define _B1LLI_H_
+/*
+ * struct for loading t4 file 
+ */
+typedef struct avmb1_t4file {
+	int len;
+	unsigned char *data;
+} avmb1_t4file;
+
+typedef struct avmb1_loaddef {
+	int contr;
+	avmb1_t4file t4file;
+} avmb1_loaddef;
+
+typedef struct avmb1_loadandconfigdef {
+	int contr;
+	avmb1_t4file t4file;
+        avmb1_t4file t4config; 
+} avmb1_loadandconfigdef;
+
+typedef struct avmb1_resetdef {
+	int contr;
+} avmb1_resetdef;
+
+typedef struct avmb1_getdef {
+	int contr;
+	int cardtype;
+	int cardstate;
+} avmb1_getdef;
+
+/*
+ * struct for adding new cards 
+ */
+typedef struct avmb1_carddef {
+	int port;
+	int irq;
+} avmb1_carddef;
+
+#define AVM_CARDTYPE_B1		0
+#define AVM_CARDTYPE_T1		1
+#define AVM_CARDTYPE_M1		2
+#define AVM_CARDTYPE_M2		3
+
+typedef struct avmb1_extcarddef {
+	int port;
+	int irq;
+        int cardtype;
+        int cardnr;  /* for HEMA/T1 */
+} avmb1_extcarddef;
+
+#define	AVMB1_LOAD		0	/* load image to card */
+#define AVMB1_ADDCARD		1	/* add a new card - OBSOLETE */
+#define AVMB1_RESETCARD		2	/* reset a card */
+#define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
+#define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
+#define AVMB1_GET_CARDINFO	5	/* get cardtype */
+#define AVMB1_REMOVECARD	6	/* remove a card - OBSOLETE */
+
+#define	AVMB1_REGISTERCARD_IS_OBSOLETE
+
+#endif				/* _B1LLI_H_ */
diff --git a/include/linux/b1pcmcia.h b/include/linux/b1pcmcia.h
new file mode 100644
index 000000000000..12a867c6061e
--- /dev/null
+++ b/include/linux/b1pcmcia.h
@@ -0,0 +1,21 @@
+/* $Id: b1pcmcia.h,v 1.1.8.2 2001/09/23 22:25:05 kai Exp $
+ *
+ * Exported functions of module b1pcmcia to be called by
+ * avm_cs card services module.
+ *
+ * Copyright 1999 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _B1PCMCIA_H_
+#define _B1PCMCIA_H_
+
+int b1pcmcia_addcard_b1(unsigned int port, unsigned irq);
+int b1pcmcia_addcard_m1(unsigned int port, unsigned irq);
+int b1pcmcia_addcard_m2(unsigned int port, unsigned irq);
+int b1pcmcia_delcard(unsigned int port, unsigned irq);
+
+#endif	/* _B1PCMCIA_H_ */
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
new file mode 100644
index 000000000000..f7a1390d67f5
--- /dev/null
+++ b/include/linux/backing-dev.h
@@ -0,0 +1,104 @@
+/*
+ * include/linux/backing-dev.h
+ *
+ * low-level device information and state which is propagated up through
+ * to high-level code.
+ */
+
+#ifndef _LINUX_BACKING_DEV_H
+#define _LINUX_BACKING_DEV_H
+
+#include <asm/atomic.h>
+
+/*
+ * Bits in backing_dev_info.state
+ */
+enum bdi_state {
+	BDI_pdflush,		/* A pdflush thread is working this device */
+	BDI_write_congested,	/* The write queue is getting full */
+	BDI_read_congested,	/* The read queue is getting full */
+	BDI_unused,		/* Available bits start here */
+};
+
+typedef int (congested_fn)(void *, int);
+
+struct backing_dev_info {
+	unsigned long ra_pages;	/* max readahead in PAGE_CACHE_SIZE units */
+	unsigned long state;	/* Always use atomic bitops on this */
+	unsigned int capabilities; /* Device capabilities */
+	congested_fn *congested_fn; /* Function pointer if device is md/dm */
+	void *congested_data;	/* Pointer to aux data for congested func */
+	void (*unplug_io_fn)(struct backing_dev_info *, struct page *);
+	void *unplug_io_data;
+};
+
+
+/*
+ * Flags in backing_dev_info::capability
+ * - The first two flags control whether dirty pages will contribute to the
+ *   VM's accounting and whether writepages() should be called for dirty pages
+ *   (something that would not, for example, be appropriate for ramfs)
+ * - These flags let !MMU mmap() govern direct device mapping vs immediate
+ *   copying more easily for MAP_PRIVATE, especially for ROM filesystems
+ */
+#define BDI_CAP_NO_ACCT_DIRTY	0x00000001	/* Dirty pages shouldn't contribute to accounting */
+#define BDI_CAP_NO_WRITEBACK	0x00000002	/* Don't write pages back */
+#define BDI_CAP_MAP_COPY	0x00000004	/* Copy can be mapped (MAP_PRIVATE) */
+#define BDI_CAP_MAP_DIRECT	0x00000008	/* Can be mapped directly (MAP_SHARED) */
+#define BDI_CAP_READ_MAP	0x00000010	/* Can be mapped for reading */
+#define BDI_CAP_WRITE_MAP	0x00000020	/* Can be mapped for writing */
+#define BDI_CAP_EXEC_MAP	0x00000040	/* Can be mapped for execution */
+#define BDI_CAP_VMFLAGS \
+	(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
+
+#if defined(VM_MAYREAD) && \
+	(BDI_CAP_READ_MAP != VM_MAYREAD || \
+	 BDI_CAP_WRITE_MAP != VM_MAYWRITE || \
+	 BDI_CAP_EXEC_MAP != VM_MAYEXEC)
+#error please change backing_dev_info::capabilities flags
+#endif
+
+extern struct backing_dev_info default_backing_dev_info;
+void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page);
+
+int writeback_acquire(struct backing_dev_info *bdi);
+int writeback_in_progress(struct backing_dev_info *bdi);
+void writeback_release(struct backing_dev_info *bdi);
+
+static inline int bdi_congested(struct backing_dev_info *bdi, int bdi_bits)
+{
+	if (bdi->congested_fn)
+		return bdi->congested_fn(bdi->congested_data, bdi_bits);
+	return (bdi->state & bdi_bits);
+}
+
+static inline int bdi_read_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, 1 << BDI_read_congested);
+}
+
+static inline int bdi_write_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, 1 << BDI_write_congested);
+}
+
+static inline int bdi_rw_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, (1 << BDI_read_congested)|
+				  (1 << BDI_write_congested));
+}
+
+#define bdi_cap_writeback_dirty(bdi) \
+	(!((bdi)->capabilities & BDI_CAP_NO_WRITEBACK))
+
+#define bdi_cap_account_dirty(bdi) \
+	(!((bdi)->capabilities & BDI_CAP_NO_ACCT_DIRTY))
+
+#define mapping_cap_writeback_dirty(mapping) \
+	bdi_cap_writeback_dirty((mapping)->backing_dev_info)
+
+#define mapping_cap_account_dirty(mapping) \
+	bdi_cap_account_dirty((mapping)->backing_dev_info)
+
+
+#endif		/* _LINUX_BACKING_DEV_H */
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
new file mode 100644
index 000000000000..bb9e54322322
--- /dev/null
+++ b/include/linux/backlight.h
@@ -0,0 +1,57 @@
+/*
+ * Backlight Lowlevel Control Abstraction
+ *
+ * Copyright (C) 2003,2004 Hewlett-Packard Company
+ *
+ */
+
+#ifndef _LINUX_BACKLIGHT_H
+#define _LINUX_BACKLIGHT_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+
+struct backlight_device;
+struct fb_info;
+
+/* This structure defines all the properties of a backlight
+   (usually attached to a LCD). */
+struct backlight_properties {
+	/* Owner module */
+	struct module *owner;
+	/* Get the backlight power status (0: full on, 1..3: power saving
+	   modes; 4: full off), see FB_BLANK_XXX */
+	int (*get_power)(struct backlight_device *);
+	/* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
+	int (*set_power)(struct backlight_device *, int power);
+	/* Maximal value for brightness (read-only) */
+	int max_brightness;
+	/* Get current backlight brightness */
+	int (*get_brightness)(struct backlight_device *);
+	/* Set backlight brightness (0..max_brightness) */
+	int (*set_brightness)(struct backlight_device *, int brightness);
+	/* Check if given framebuffer device is the one bound to this backlight;
+	   return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
+	int (*check_fb)(struct fb_info *);
+};
+
+struct backlight_device {
+	/* This protects the 'props' field. If 'props' is NULL, the driver that
+	   registered this device has been unloaded, and if class_get_devdata()
+	   points to something in the body of that driver, it is also invalid. */
+	struct semaphore sem;
+	/* If this is NULL, the backing module is unloaded */
+	struct backlight_properties *props;
+	/* The framebuffer notifier block */
+	struct notifier_block fb_notif;
+	/* The class device structure */
+	struct class_device class_dev;
+};
+
+extern struct backlight_device *backlight_device_register(const char *name,
+	void *devdata, struct backlight_properties *bp);
+extern void backlight_device_unregister(struct backlight_device *bd);
+
+#define to_backlight_device(obj) container_of(obj, struct backlight_device, class_dev)
+
+#endif
diff --git a/include/linux/baycom.h b/include/linux/baycom.h
new file mode 100644
index 000000000000..81249e029dad
--- /dev/null
+++ b/include/linux/baycom.h
@@ -0,0 +1,39 @@
+/*
+ * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
+ * and the parallel 9600 baud modem
+ * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _BAYCOM_H
+#define _BAYCOM_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct baycom_debug_data {
+	unsigned long debug1;
+	unsigned long debug2;
+	long debug3;
+};
+
+struct baycom_ioctl {
+	int cmd;
+	union {
+		struct baycom_debug_data dbg;
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values change for baycom
+ */
+#define BAYCOMCTL_GETDEBUG       0x92
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _BAYCOM_H */
+
+/* --------------------------------------------------------------------- */
diff --git a/include/linux/bcd.h b/include/linux/bcd.h
new file mode 100644
index 000000000000..c545308125b0
--- /dev/null
+++ b/include/linux/bcd.h
@@ -0,0 +1,20 @@
+/* Permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+/* macros to translate to/from binary and binary-coded decimal (frequently
+ * found in RTC chips).
+ */
+
+#ifndef _BCD_H
+#define _BCD_H
+
+#define BCD2BIN(val)	(((val) & 0x0f) + ((val)>>4)*10)
+#define BIN2BCD(val)	((((val)/10)<<4) + (val)%10)
+
+/* backwards compat */
+#define BCD_TO_BIN(val) ((val)=BCD2BIN(val))
+#define BIN_TO_BCD(val) ((val)=BIN2BCD(val))
+
+#endif /* _BCD_H */
diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h
new file mode 100644
index 000000000000..f7f0913cd110
--- /dev/null
+++ b/include/linux/bfs_fs.h
@@ -0,0 +1,79 @@
+/*
+ *	include/linux/bfs_fs.h - BFS data structures on disk.
+ *	Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
+ */
+
+#ifndef _LINUX_BFS_FS_H
+#define _LINUX_BFS_FS_H
+
+#define BFS_BSIZE_BITS		9
+#define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
+
+#define BFS_MAGIC		0x1BADFACE
+#define BFS_ROOT_INO		2
+#define BFS_INODES_PER_BLOCK	8
+
+/* SVR4 vnode type values (bfs_inode->i_vtype) */
+#define BFS_VDIR		2
+#define BFS_VREG		1
+
+/* BFS inode layout on disk */
+struct bfs_inode {
+	__u16 i_ino;
+	__u16 i_unused;
+	__u32 i_sblock;
+	__u32 i_eblock;
+	__u32 i_eoffset;
+	__u32 i_vtype;
+	__u32 i_mode;
+	__s32 i_uid;
+	__s32 i_gid;
+	__u32 i_nlink;
+	__u32 i_atime;
+	__u32 i_mtime;
+	__u32 i_ctime;
+	__u32 i_padding[4];
+};
+
+#define BFS_NAMELEN		14	
+#define BFS_DIRENT_SIZE		16
+#define BFS_DIRS_PER_BLOCK	32
+
+struct bfs_dirent {
+	__u16 ino;
+	char name[BFS_NAMELEN];
+};
+
+/* BFS superblock layout on disk */
+struct bfs_super_block {
+	__u32 s_magic;
+	__u32 s_start;
+	__u32 s_end;
+	__s32 s_from;
+	__s32 s_to;
+	__s32 s_bfrom;
+	__s32 s_bto;
+	char  s_fsname[6];
+	char  s_volume[6];
+	__u32 s_padding[118];
+};
+
+#define BFS_NZFILESIZE(ip) \
+        (((ip)->i_eoffset + 1) - (ip)->i_sblock * BFS_BSIZE)
+
+#define BFS_FILESIZE(ip) \
+        ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
+
+#define BFS_FILEBLOCKS(ip) \
+        ((ip)->i_sblock == 0 ? 0 : ((ip)->i_eblock + 1) - (ip)->i_sblock)
+
+#define BFS_OFF2INO(offset) \
+        ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
+
+#define BFS_INO2OFF(ino) \
+	((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
+
+#define BFS_UNCLEAN(bfs_sb, sb)	\
+	((bfs_sb->s_from != -1) && (bfs_sb->s_to != -1) && !(sb->s_flags & MS_RDONLY))
+
+#endif	/* _LINUX_BFS_FS_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
new file mode 100644
index 000000000000..54f820832c73
--- /dev/null
+++ b/include/linux/binfmts.h
@@ -0,0 +1,87 @@
+#ifndef _LINUX_BINFMTS_H
+#define _LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * MAX_ARG_PAGES defines the number of pages allocated for arguments
+ * and envelope for the new program. 32 should suffice, this gives
+ * a maximum env+arg of 128kB w/4KB pages!
+ */
+#define MAX_ARG_PAGES 32
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#ifdef __KERNEL__
+
+/*
+ * This structure is used to hold the arguments that are used when loading binaries.
+ */
+struct linux_binprm{
+	char buf[BINPRM_BUF_SIZE];
+	struct page *page[MAX_ARG_PAGES];
+	struct mm_struct *mm;
+	unsigned long p; /* current top of mem */
+	int sh_bang;
+	struct file * file;
+	int e_uid, e_gid;
+	kernel_cap_t cap_inheritable, cap_permitted, cap_effective;
+	void *security;
+	int argc, envc;
+	char * filename;	/* Name of binary as seen by procps */
+	char * interp;		/* Name of the binary really executed. Most
+				   of the time same as filename, but could be
+				   different for binfmt_{misc,script} */
+	unsigned interp_flags;
+	unsigned interp_data;
+	unsigned long loader, exec;
+};
+
+#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
+#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
+
+/* fd of the binary should be passed to the interpreter */
+#define BINPRM_FLAGS_EXECFD_BIT 1
+#define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
+
+
+/*
+ * This structure defines the functions that are used to load the binary formats that
+ * linux accepts.
+ */
+struct linux_binfmt {
+	struct linux_binfmt * next;
+	struct module *module;
+	int (*load_binary)(struct linux_binprm *, struct  pt_regs * regs);
+	int (*load_shlib)(struct file *);
+	int (*core_dump)(long signr, struct pt_regs * regs, struct file * file);
+	unsigned long min_coredump;	/* minimal dump size */
+};
+
+extern int register_binfmt(struct linux_binfmt *);
+extern int unregister_binfmt(struct linux_binfmt *);
+
+extern int prepare_binprm(struct linux_binprm *);
+extern void remove_arg_zero(struct linux_binprm *);
+extern int search_binary_handler(struct linux_binprm *,struct pt_regs *);
+extern int flush_old_exec(struct linux_binprm * bprm);
+
+/* Stack area protections */
+#define EXSTACK_DEFAULT   0	/* Whatever the arch defaults to */
+#define EXSTACK_DISABLE_X 1	/* Disable executable stacks */
+#define EXSTACK_ENABLE_X  2	/* Enable executable stacks */
+
+extern int setup_arg_pages(struct linux_binprm * bprm,
+			   unsigned long stack_top,
+			   int executable_stack);
+extern int copy_strings(int argc,char __user * __user * argv,struct linux_binprm *bprm); 
+extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern void compute_creds(struct linux_binprm *binprm);
+extern int do_coredump(long signr, int exit_code, struct pt_regs * regs);
+extern int set_binfmt(struct linux_binfmt *new);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/bio.h b/include/linux/bio.h
new file mode 100644
index 000000000000..038022763f09
--- /dev/null
+++ b/include/linux/bio.h
@@ -0,0 +1,339 @@
+/*
+ * 2.5 block I/O model
+ *
+ * Copyright (C) 2001 Jens Axboe <axboe@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public Licens
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-
+ */
+#ifndef __LINUX_BIO_H
+#define __LINUX_BIO_H
+
+#include <linux/highmem.h>
+#include <linux/mempool.h>
+
+/* Platforms may set this to teach the BIO layer about IOMMU hardware. */
+#include <asm/io.h>
+
+#if defined(BIO_VMERGE_MAX_SIZE) && defined(BIO_VMERGE_BOUNDARY)
+#define BIOVEC_VIRT_START_SIZE(x) (bvec_to_phys(x) & (BIO_VMERGE_BOUNDARY - 1))
+#define BIOVEC_VIRT_OVERSIZE(x)	((x) > BIO_VMERGE_MAX_SIZE)
+#else
+#define BIOVEC_VIRT_START_SIZE(x)	0
+#define BIOVEC_VIRT_OVERSIZE(x)		0
+#endif
+
+#ifndef BIO_VMERGE_BOUNDARY
+#define BIO_VMERGE_BOUNDARY	0
+#endif
+
+#define BIO_DEBUG
+
+#ifdef BIO_DEBUG
+#define BIO_BUG_ON	BUG_ON
+#else
+#define BIO_BUG_ON
+#endif
+
+#define BIO_MAX_PAGES		(256)
+#define BIO_MAX_SIZE		(BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
+#define BIO_MAX_SECTORS		(BIO_MAX_SIZE >> 9)
+
+/*
+ * was unsigned short, but we might as well be ready for > 64kB I/O pages
+ */
+struct bio_vec {
+	struct page	*bv_page;
+	unsigned int	bv_len;
+	unsigned int	bv_offset;
+};
+
+struct bio_set;
+struct bio;
+typedef int (bio_end_io_t) (struct bio *, unsigned int, int);
+typedef void (bio_destructor_t) (struct bio *);
+
+/*
+ * main unit of I/O for the block layer and lower layers (ie drivers and
+ * stacking drivers)
+ */
+struct bio {
+	sector_t		bi_sector;
+	struct bio		*bi_next;	/* request queue link */
+	struct block_device	*bi_bdev;
+	unsigned long		bi_flags;	/* status, command, etc */
+	unsigned long		bi_rw;		/* bottom bits READ/WRITE,
+						 * top bits priority
+						 */
+
+	unsigned short		bi_vcnt;	/* how many bio_vec's */
+	unsigned short		bi_idx;		/* current index into bvl_vec */
+
+	/* Number of segments in this BIO after
+	 * physical address coalescing is performed.
+	 */
+	unsigned short		bi_phys_segments;
+
+	/* Number of segments after physical and DMA remapping
+	 * hardware coalescing is performed.
+	 */
+	unsigned short		bi_hw_segments;
+
+	unsigned int		bi_size;	/* residual I/O count */
+
+	/*
+	 * To keep track of the max hw size, we account for the
+	 * sizes of the first and last virtually mergeable segments
+	 * in this bio
+	 */
+	unsigned int		bi_hw_front_size;
+	unsigned int		bi_hw_back_size;
+
+	unsigned int		bi_max_vecs;	/* max bvl_vecs we can hold */
+
+	struct bio_vec		*bi_io_vec;	/* the actual vec list */
+
+	bio_end_io_t		*bi_end_io;
+	atomic_t		bi_cnt;		/* pin count */
+
+	void			*bi_private;
+
+	bio_destructor_t	*bi_destructor;	/* destructor */
+	struct bio_set		*bi_set;	/* memory pools set */
+};
+
+/*
+ * bio flags
+ */
+#define BIO_UPTODATE	0	/* ok after I/O completion */
+#define BIO_RW_BLOCK	1	/* RW_AHEAD set, and read/write would block */
+#define BIO_EOF		2	/* out-out-bounds error */
+#define BIO_SEG_VALID	3	/* nr_hw_seg valid */
+#define BIO_CLONED	4	/* doesn't own data */
+#define BIO_BOUNCED	5	/* bio is a bounce bio */
+#define BIO_USER_MAPPED 6	/* contains user pages */
+#define BIO_EOPNOTSUPP	7	/* not supported */
+#define bio_flagged(bio, flag)	((bio)->bi_flags & (1 << (flag)))
+
+/*
+ * top 4 bits of bio flags indicate the pool this bio came from
+ */
+#define BIO_POOL_BITS		(4)
+#define BIO_POOL_OFFSET		(BITS_PER_LONG - BIO_POOL_BITS)
+#define BIO_POOL_MASK		(1UL << BIO_POOL_OFFSET)
+#define BIO_POOL_IDX(bio)	((bio)->bi_flags >> BIO_POOL_OFFSET)	
+
+/*
+ * bio bi_rw flags
+ *
+ * bit 0 -- read (not set) or write (set)
+ * bit 1 -- rw-ahead when set
+ * bit 2 -- barrier
+ * bit 3 -- fail fast, don't want low level driver retries
+ * bit 4 -- synchronous I/O hint: the block layer will unplug immediately
+ */
+#define BIO_RW		0
+#define BIO_RW_AHEAD	1
+#define BIO_RW_BARRIER	2
+#define BIO_RW_FAILFAST	3
+#define BIO_RW_SYNC	4
+
+/*
+ * various member access, note that bio_data should of course not be used
+ * on highmem page vectors
+ */
+#define bio_iovec_idx(bio, idx)	(&((bio)->bi_io_vec[(idx)]))
+#define bio_iovec(bio)		bio_iovec_idx((bio), (bio)->bi_idx)
+#define bio_page(bio)		bio_iovec((bio))->bv_page
+#define bio_offset(bio)		bio_iovec((bio))->bv_offset
+#define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
+#define bio_sectors(bio)	((bio)->bi_size >> 9)
+#define bio_cur_sectors(bio)	(bio_iovec(bio)->bv_len >> 9)
+#define bio_data(bio)		(page_address(bio_page((bio))) + bio_offset((bio)))
+#define bio_barrier(bio)	((bio)->bi_rw & (1 << BIO_RW_BARRIER))
+#define bio_sync(bio)		((bio)->bi_rw & (1 << BIO_RW_SYNC))
+#define bio_failfast(bio)	((bio)->bi_rw & (1 << BIO_RW_FAILFAST))
+#define bio_rw_ahead(bio)	((bio)->bi_rw & (1 << BIO_RW_AHEAD))
+
+/*
+ * will die
+ */
+#define bio_to_phys(bio)	(page_to_phys(bio_page((bio))) + (unsigned long) bio_offset((bio)))
+#define bvec_to_phys(bv)	(page_to_phys((bv)->bv_page) + (unsigned long) (bv)->bv_offset)
+
+/*
+ * queues that have highmem support enabled may still need to revert to
+ * PIO transfers occasionally and thus map high pages temporarily. For
+ * permanent PIO fall back, user is probably better off disabling highmem
+ * I/O completely on that queue (see ide-dma for example)
+ */
+#define __bio_kmap_atomic(bio, idx, kmtype)				\
+	(kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page, kmtype) +	\
+		bio_iovec_idx((bio), (idx))->bv_offset)
+
+#define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr, kmtype)
+
+/*
+ * merge helpers etc
+ */
+
+#define __BVEC_END(bio)		bio_iovec_idx((bio), (bio)->bi_vcnt - 1)
+#define __BVEC_START(bio)	bio_iovec_idx((bio), (bio)->bi_idx)
+
+/*
+ * allow arch override, for eg virtualized architectures (put in asm/io.h)
+ */
+#ifndef BIOVEC_PHYS_MERGEABLE
+#define BIOVEC_PHYS_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+#endif
+
+#define BIOVEC_VIRT_MERGEABLE(vec1, vec2)	\
+	((((bvec_to_phys((vec1)) + (vec1)->bv_len) | bvec_to_phys((vec2))) & (BIO_VMERGE_BOUNDARY - 1)) == 0)
+#define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
+	(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
+#define BIOVEC_SEG_BOUNDARY(q, b1, b2) \
+	__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, (q)->seg_boundary_mask)
+#define BIO_SEG_BOUNDARY(q, b1, b2) \
+	BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
+
+#define bio_io_error(bio, bytes) bio_endio((bio), (bytes), -EIO)
+
+/*
+ * drivers should not use the __ version unless they _really_ want to
+ * run through the entire bio and not just pending pieces
+ */
+#define __bio_for_each_segment(bvl, bio, i, start_idx)			\
+	for (bvl = bio_iovec_idx((bio), (start_idx)), i = (start_idx);	\
+	     i < (bio)->bi_vcnt;					\
+	     bvl++, i++)
+
+#define bio_for_each_segment(bvl, bio, i)				\
+	__bio_for_each_segment(bvl, bio, i, (bio)->bi_idx)
+
+/*
+ * get a reference to a bio, so it won't disappear. the intended use is
+ * something like:
+ *
+ * bio_get(bio);
+ * submit_bio(rw, bio);
+ * if (bio->bi_flags ...)
+ *	do_something
+ * bio_put(bio);
+ *
+ * without the bio_get(), it could potentially complete I/O before submit_bio
+ * returns. and then bio would be freed memory when if (bio->bi_flags ...)
+ * runs
+ */
+#define bio_get(bio)	atomic_inc(&(bio)->bi_cnt)
+
+
+/*
+ * A bio_pair is used when we need to split a bio.
+ * This can only happen for a bio that refers to just one
+ * page of data, and in the unusual situation when the
+ * page crosses a chunk/device boundary
+ *
+ * The address of the master bio is stored in bio1.bi_private
+ * The address of the pool the pair was allocated from is stored
+ *   in bio2.bi_private
+ */
+struct bio_pair {
+	struct bio	bio1, bio2;
+	struct bio_vec	bv1, bv2;
+	atomic_t	cnt;
+	int		error;
+};
+extern struct bio_pair *bio_split(struct bio *bi, mempool_t *pool,
+				  int first_sectors);
+extern mempool_t *bio_split_pool;
+extern void bio_pair_release(struct bio_pair *dbio);
+
+extern struct bio_set *bioset_create(int, int, int);
+extern void bioset_free(struct bio_set *);
+
+extern struct bio *bio_alloc(unsigned int __nocast, int);
+extern struct bio *bio_alloc_bioset(unsigned int __nocast, int, struct bio_set *);
+extern void bio_put(struct bio *);
+
+extern void bio_endio(struct bio *, unsigned int, int);
+struct request_queue;
+extern int bio_phys_segments(struct request_queue *, struct bio *);
+extern int bio_hw_segments(struct request_queue *, struct bio *);
+
+extern void __bio_clone(struct bio *, struct bio *);
+extern struct bio *bio_clone(struct bio *, unsigned int __nocast);
+
+extern void bio_init(struct bio *);
+
+extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int);
+extern int bio_get_nr_vecs(struct block_device *);
+extern struct bio *bio_map_user(struct request_queue *, struct block_device *,
+				unsigned long, unsigned int, int);
+extern void bio_unmap_user(struct bio *);
+extern void bio_set_pages_dirty(struct bio *bio);
+extern void bio_check_pages_dirty(struct bio *bio);
+extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int);
+extern int bio_uncopy_user(struct bio *);
+void zero_fill_bio(struct bio *bio);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * remember to add offset! and never ever reenable interrupts between a
+ * bvec_kmap_irq and bvec_kunmap_irq!!
+ *
+ * This function MUST be inlined - it plays with the CPU interrupt flags.
+ * Hence the `extern inline'.
+ */
+extern inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
+{
+	unsigned long addr;
+
+	/*
+	 * might not be a highmem page, but the preempt/irq count
+	 * balancing is a lot nicer this way
+	 */
+	local_irq_save(*flags);
+	addr = (unsigned long) kmap_atomic(bvec->bv_page, KM_BIO_SRC_IRQ);
+
+	BUG_ON(addr & ~PAGE_MASK);
+
+	return (char *) addr + bvec->bv_offset;
+}
+
+extern inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
+{
+	unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
+
+	kunmap_atomic((void *) ptr, KM_BIO_SRC_IRQ);
+	local_irq_restore(*flags);
+}
+
+#else
+#define bvec_kmap_irq(bvec, flags)	(page_address((bvec)->bv_page) + (bvec)->bv_offset)
+#define bvec_kunmap_irq(buf, flags)	do { *(flags) = 0; } while (0)
+#endif
+
+extern inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx,
+				   unsigned long *flags)
+{
+	return bvec_kmap_irq(bio_iovec_idx(bio, idx), flags);
+}
+#define __bio_kunmap_irq(buf, flags)	bvec_kunmap_irq(buf, flags)
+
+#define bio_kmap_irq(bio, flags) \
+	__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
+#define bio_kunmap_irq(buf,flags)	__bio_kunmap_irq(buf, flags)
+
+#endif /* __LINUX_BIO_H */
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
new file mode 100644
index 000000000000..86dd5502b05c
--- /dev/null
+++ b/include/linux/bitmap.h
@@ -0,0 +1,261 @@
+#ifndef __LINUX_BITMAP_H
+#define __LINUX_BITMAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/string.h>
+
+/*
+ * bitmaps provide bit arrays that consume one or more unsigned
+ * longs.  The bitmap interface and available operations are listed
+ * here, in bitmap.h
+ *
+ * Function implementations generic to all architectures are in
+ * lib/bitmap.c.  Functions implementations that are architecture
+ * specific are in various include/asm-<arch>/bitops.h headers
+ * and other arch/<arch> specific files.
+ *
+ * See lib/bitmap.c for more details.
+ */
+
+/*
+ * The available bitmap operations and their rough meaning in the
+ * case that the bitmap is a single unsigned long are thus:
+ *
+ * bitmap_zero(dst, nbits)			*dst = 0UL
+ * bitmap_fill(dst, nbits)			*dst = ~0UL
+ * bitmap_copy(dst, src, nbits)			*dst = *src
+ * bitmap_and(dst, src1, src2, nbits)		*dst = *src1 & *src2
+ * bitmap_or(dst, src1, src2, nbits)		*dst = *src1 | *src2
+ * bitmap_xor(dst, src1, src2, nbits)		*dst = *src1 ^ *src2
+ * bitmap_andnot(dst, src1, src2, nbits)	*dst = *src1 & ~(*src2)
+ * bitmap_complement(dst, src, nbits)		*dst = ~(*src)
+ * bitmap_equal(src1, src2, nbits)		Are *src1 and *src2 equal?
+ * bitmap_intersects(src1, src2, nbits) 	Do *src1 and *src2 overlap?
+ * bitmap_subset(src1, src2, nbits)		Is *src1 a subset of *src2?
+ * bitmap_empty(src, nbits)			Are all bits zero in *src?
+ * bitmap_full(src, nbits)			Are all bits set in *src?
+ * bitmap_weight(src, nbits)			Hamming Weight: number set bits
+ * bitmap_shift_right(dst, src, n, nbits)	*dst = *src >> n
+ * bitmap_shift_left(dst, src, n, nbits)	*dst = *src << n
+ * bitmap_scnprintf(buf, len, src, nbits)	Print bitmap src to buf
+ * bitmap_parse(ubuf, ulen, dst, nbits)		Parse bitmap dst from user buf
+ * bitmap_scnlistprintf(buf, len, src, nbits)	Print bitmap src as list to buf
+ * bitmap_parselist(buf, dst, nbits)		Parse bitmap dst from list
+ */
+
+/*
+ * Also the following operations in asm/bitops.h apply to bitmaps.
+ *
+ * set_bit(bit, addr)			*addr |= bit
+ * clear_bit(bit, addr)			*addr &= ~bit
+ * change_bit(bit, addr)		*addr ^= bit
+ * test_bit(bit, addr)			Is bit set in *addr?
+ * test_and_set_bit(bit, addr)		Set bit and return old value
+ * test_and_clear_bit(bit, addr)	Clear bit and return old value
+ * test_and_change_bit(bit, addr)	Change bit and return old value
+ * find_first_zero_bit(addr, nbits)	Position first zero bit in *addr
+ * find_first_bit(addr, nbits)		Position first set bit in *addr
+ * find_next_zero_bit(addr, nbits, bit)	Position next zero bit in *addr >= bit
+ * find_next_bit(addr, nbits, bit)	Position next set bit in *addr >= bit
+ */
+
+/*
+ * The DECLARE_BITMAP(name,bits) macro, in linux/types.h, can be used
+ * to declare an array named 'name' of just enough unsigned longs to
+ * contain all bit positions from 0 to 'bits' - 1.
+ */
+
+/*
+ * lib/bitmap.c provides these functions:
+ */
+
+extern int __bitmap_empty(const unsigned long *bitmap, int bits);
+extern int __bitmap_full(const unsigned long *bitmap, int bits);
+extern int __bitmap_equal(const unsigned long *bitmap1,
+                	const unsigned long *bitmap2, int bits);
+extern void __bitmap_complement(unsigned long *dst, const unsigned long *src,
+			int bits);
+extern void __bitmap_shift_right(unsigned long *dst,
+                        const unsigned long *src, int shift, int bits);
+extern void __bitmap_shift_left(unsigned long *dst,
+                        const unsigned long *src, int shift, int bits);
+extern void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_intersects(const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_subset(const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_weight(const unsigned long *bitmap, int bits);
+
+extern int bitmap_scnprintf(char *buf, unsigned int len,
+			const unsigned long *src, int nbits);
+extern int bitmap_parse(const char __user *ubuf, unsigned int ulen,
+			unsigned long *dst, int nbits);
+extern int bitmap_scnlistprintf(char *buf, unsigned int len,
+			const unsigned long *src, int nbits);
+extern int bitmap_parselist(const char *buf, unsigned long *maskp,
+			int nmaskbits);
+extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order);
+extern void bitmap_release_region(unsigned long *bitmap, int pos, int order);
+extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order);
+
+#define BITMAP_LAST_WORD_MASK(nbits)					\
+(									\
+	((nbits) % BITS_PER_LONG) ?					\
+		(1UL<<((nbits) % BITS_PER_LONG))-1 : ~0UL		\
+)
+
+static inline void bitmap_zero(unsigned long *dst, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = 0UL;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memset(dst, 0, len);
+	}
+}
+
+static inline void bitmap_fill(unsigned long *dst, int nbits)
+{
+	size_t nlongs = BITS_TO_LONGS(nbits);
+	if (nlongs > 1) {
+		int len = (nlongs - 1) * sizeof(unsigned long);
+		memset(dst, 0xff,  len);
+	}
+	dst[nlongs - 1] = BITMAP_LAST_WORD_MASK(nbits);
+}
+
+static inline void bitmap_copy(unsigned long *dst, const unsigned long *src,
+			int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memcpy(dst, src, len);
+	}
+}
+
+static inline void bitmap_and(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src1 & *src2;
+	else
+		__bitmap_and(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src1 | *src2;
+	else
+		__bitmap_or(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_xor(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src1 ^ *src2;
+	else
+		__bitmap_xor(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src1 & ~(*src2);
+	else
+		__bitmap_andnot(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
+			int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = ~(*src) & BITMAP_LAST_WORD_MASK(nbits);
+	else
+		__bitmap_complement(dst, src, nbits);
+}
+
+static inline int bitmap_equal(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		return ! ((*src1 ^ *src2) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_equal(src1, src2, nbits);
+}
+
+static inline int bitmap_intersects(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		return ((*src1 & *src2) & BITMAP_LAST_WORD_MASK(nbits)) != 0;
+	else
+		return __bitmap_intersects(src1, src2, nbits);
+}
+
+static inline int bitmap_subset(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		return ! ((*src1 & ~(*src2)) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_subset(src1, src2, nbits);
+}
+
+static inline int bitmap_empty(const unsigned long *src, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		return ! (*src & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_empty(src, nbits);
+}
+
+static inline int bitmap_full(const unsigned long *src, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		return ! (~(*src) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_full(src, nbits);
+}
+
+static inline int bitmap_weight(const unsigned long *src, int nbits)
+{
+	return __bitmap_weight(src, nbits);
+}
+
+static inline void bitmap_shift_right(unsigned long *dst,
+			const unsigned long *src, int n, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = *src >> n;
+	else
+		__bitmap_shift_right(dst, src, n, nbits);
+}
+
+static inline void bitmap_shift_left(unsigned long *dst,
+			const unsigned long *src, int n, int nbits)
+{
+	if (nbits <= BITS_PER_LONG)
+		*dst = (*src << n) & BITMAP_LAST_WORD_MASK(nbits);
+	else
+		__bitmap_shift_left(dst, src, n, nbits);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __LINUX_BITMAP_H */
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
new file mode 100644
index 000000000000..cb3c3ef50f50
--- /dev/null
+++ b/include/linux/bitops.h
@@ -0,0 +1,159 @@
+#ifndef _LINUX_BITOPS_H
+#define _LINUX_BITOPS_H
+#include <asm/types.h>
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+static inline int generic_ffs(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+static __inline__ int generic_fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+/*
+ * Include this here because some architectures need generic_ffs/fls in
+ * scope
+ */
+#include <asm/bitops.h>
+
+static __inline__ int get_bitmask_order(unsigned int count)
+{
+	int order;
+	
+	order = fls(count);
+	return order;	/* We could be slightly more clever with -1 here... */
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+static inline unsigned int generic_hweight32(unsigned int w)
+{
+        unsigned int res = (w & 0x55555555) + ((w >> 1) & 0x55555555);
+        res = (res & 0x33333333) + ((res >> 2) & 0x33333333);
+        res = (res & 0x0F0F0F0F) + ((res >> 4) & 0x0F0F0F0F);
+        res = (res & 0x00FF00FF) + ((res >> 8) & 0x00FF00FF);
+        return (res & 0x0000FFFF) + ((res >> 16) & 0x0000FFFF);
+}
+
+static inline unsigned int generic_hweight16(unsigned int w)
+{
+        unsigned int res = (w & 0x5555) + ((w >> 1) & 0x5555);
+        res = (res & 0x3333) + ((res >> 2) & 0x3333);
+        res = (res & 0x0F0F) + ((res >> 4) & 0x0F0F);
+        return (res & 0x00FF) + ((res >> 8) & 0x00FF);
+}
+
+static inline unsigned int generic_hweight8(unsigned int w)
+{
+        unsigned int res = (w & 0x55) + ((w >> 1) & 0x55);
+        res = (res & 0x33) + ((res >> 2) & 0x33);
+        return (res & 0x0F) + ((res >> 4) & 0x0F);
+}
+
+static inline unsigned long generic_hweight64(__u64 w)
+{
+#if BITS_PER_LONG < 64
+	return generic_hweight32((unsigned int)(w >> 32)) +
+				generic_hweight32((unsigned int)w);
+#else
+	u64 res;
+	res = (w & 0x5555555555555555ul) + ((w >> 1) & 0x5555555555555555ul);
+	res = (res & 0x3333333333333333ul) + ((res >> 2) & 0x3333333333333333ul);
+	res = (res & 0x0F0F0F0F0F0F0F0Ful) + ((res >> 4) & 0x0F0F0F0F0F0F0F0Ful);
+	res = (res & 0x00FF00FF00FF00FFul) + ((res >> 8) & 0x00FF00FF00FF00FFul);
+	res = (res & 0x0000FFFF0000FFFFul) + ((res >> 16) & 0x0000FFFF0000FFFFul);
+	return (res & 0x00000000FFFFFFFFul) + ((res >> 32) & 0x00000000FFFFFFFFul);
+#endif
+}
+
+static inline unsigned long hweight_long(unsigned long w)
+{
+	return sizeof(w) == 4 ? generic_hweight32(w) : generic_hweight64(w);
+}
+
+/*
+ * rol32 - rotate a 32-bit value left
+ *
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 rol32(__u32 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (32 - shift));
+}
+
+/*
+ * ror32 - rotate a 32-bit value right
+ *
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 ror32(__u32 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (32 - shift));
+}
+
+#endif
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
new file mode 100644
index 000000000000..70ac2860a605
--- /dev/null
+++ b/include/linux/blkdev.h
@@ -0,0 +1,759 @@
+#ifndef _LINUX_BLKDEV_H
+#define _LINUX_BLKDEV_H
+
+#include <linux/config.h>
+#include <linux/major.h>
+#include <linux/genhd.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/pagemap.h>
+#include <linux/backing-dev.h>
+#include <linux/wait.h>
+#include <linux/mempool.h>
+#include <linux/bio.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <asm/scatterlist.h>
+
+struct request_queue;
+typedef struct request_queue request_queue_t;
+struct elevator_queue;
+typedef struct elevator_queue elevator_t;
+struct request_pm_state;
+
+#define BLKDEV_MIN_RQ	4
+#define BLKDEV_MAX_RQ	128	/* Default maximum */
+
+/*
+ * This is the per-process anticipatory I/O scheduler state.
+ */
+struct as_io_context {
+	spinlock_t lock;
+
+	void (*dtor)(struct as_io_context *aic); /* destructor */
+	void (*exit)(struct as_io_context *aic); /* called on task exit */
+
+	unsigned long state;
+	atomic_t nr_queued; /* queued reads & sync writes */
+	atomic_t nr_dispatched; /* number of requests gone to the drivers */
+
+	/* IO History tracking */
+	/* Thinktime */
+	unsigned long last_end_request;
+	unsigned long ttime_total;
+	unsigned long ttime_samples;
+	unsigned long ttime_mean;
+	/* Layout pattern */
+	unsigned int seek_samples;
+	sector_t last_request_pos;
+	u64 seek_total;
+	sector_t seek_mean;
+};
+
+struct cfq_queue;
+struct cfq_io_context {
+	void (*dtor)(struct cfq_io_context *);
+	void (*exit)(struct cfq_io_context *);
+
+	struct io_context *ioc;
+
+	/*
+	 * circular list of cfq_io_contexts belonging to a process io context
+	 */
+	struct list_head list;
+	struct cfq_queue *cfqq;
+};
+
+/*
+ * This is the per-process I/O subsystem state.  It is refcounted and
+ * kmalloc'ed. Currently all fields are modified in process io context
+ * (apart from the atomic refcount), so require no locking.
+ */
+struct io_context {
+	atomic_t refcount;
+	pid_t pid;
+
+	/*
+	 * For request batching
+	 */
+	unsigned long last_waited; /* Time last woken after wait for request */
+	int nr_batch_requests;     /* Number of requests left in the batch */
+
+	spinlock_t lock;
+
+	struct as_io_context *aic;
+	struct cfq_io_context *cic;
+};
+
+void put_io_context(struct io_context *ioc);
+void exit_io_context(void);
+struct io_context *get_io_context(int gfp_flags);
+void copy_io_context(struct io_context **pdst, struct io_context **psrc);
+void swap_io_context(struct io_context **ioc1, struct io_context **ioc2);
+
+struct request;
+typedef void (rq_end_io_fn)(struct request *);
+
+struct request_list {
+	int count[2];
+	int starved[2];
+	mempool_t *rq_pool;
+	wait_queue_head_t wait[2];
+	wait_queue_head_t drain;
+};
+
+#define BLK_MAX_CDB	16
+
+/*
+ * try to put the fields that are referenced together in the same cacheline
+ */
+struct request {
+	struct list_head queuelist; /* looking for ->queue? you must _not_
+				     * access it directly, use
+				     * blkdev_dequeue_request! */
+	unsigned long flags;		/* see REQ_ bits below */
+
+	/* Maintain bio traversal state for part by part I/O submission.
+	 * hard_* are block layer internals, no driver should touch them!
+	 */
+
+	sector_t sector;		/* next sector to submit */
+	unsigned long nr_sectors;	/* no. of sectors left to submit */
+	/* no. of sectors left to submit in the current segment */
+	unsigned int current_nr_sectors;
+
+	sector_t hard_sector;		/* next sector to complete */
+	unsigned long hard_nr_sectors;	/* no. of sectors left to complete */
+	/* no. of sectors left to complete in the current segment */
+	unsigned int hard_cur_sectors;
+
+	struct bio *bio;
+	struct bio *biotail;
+
+	void *elevator_private;
+
+	int rq_status;	/* should split this into a few status bits */
+	struct gendisk *rq_disk;
+	int errors;
+	unsigned long start_time;
+
+	/* Number of scatter-gather DMA addr+len pairs after
+	 * physical address coalescing is performed.
+	 */
+	unsigned short nr_phys_segments;
+
+	/* Number of scatter-gather addr+len pairs after
+	 * physical and DMA remapping hardware coalescing is performed.
+	 * This is the number of scatter-gather entries the driver
+	 * will actually have to deal with after DMA mapping is done.
+	 */
+	unsigned short nr_hw_segments;
+
+	int tag;
+	char *buffer;
+
+	int ref_count;
+	request_queue_t *q;
+	struct request_list *rl;
+
+	struct completion *waiting;
+	void *special;
+
+	/*
+	 * when request is used as a packet command carrier
+	 */
+	unsigned int cmd_len;
+	unsigned char cmd[BLK_MAX_CDB];
+
+	unsigned int data_len;
+	void *data;
+
+	unsigned int sense_len;
+	void *sense;
+
+	unsigned int timeout;
+
+	/*
+	 * For Power Management requests
+	 */
+	struct request_pm_state *pm;
+
+	/*
+	 * completion callback. end_io_data should be folded in with waiting
+	 */
+	rq_end_io_fn *end_io;
+	void *end_io_data;
+};
+
+/*
+ * first three bits match BIO_RW* bits, important
+ */
+enum rq_flag_bits {
+	__REQ_RW,		/* not set, read. set, write */
+	__REQ_FAILFAST,		/* no low level driver retries */
+	__REQ_SOFTBARRIER,	/* may not be passed by ioscheduler */
+	__REQ_HARDBARRIER,	/* may not be passed by drive either */
+	__REQ_CMD,		/* is a regular fs rw request */
+	__REQ_NOMERGE,		/* don't touch this for merging */
+	__REQ_STARTED,		/* drive already may have started this one */
+	__REQ_DONTPREP,		/* don't call prep for this one */
+	__REQ_QUEUED,		/* uses queueing */
+	/*
+	 * for ATA/ATAPI devices
+	 */
+	__REQ_PC,		/* packet command (special) */
+	__REQ_BLOCK_PC,		/* queued down pc from block layer */
+	__REQ_SENSE,		/* sense retrival */
+
+	__REQ_FAILED,		/* set if the request failed */
+	__REQ_QUIET,		/* don't worry about errors */
+	__REQ_SPECIAL,		/* driver suplied command */
+	__REQ_DRIVE_CMD,
+	__REQ_DRIVE_TASK,
+	__REQ_DRIVE_TASKFILE,
+	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
+	__REQ_PM_SUSPEND,	/* suspend request */
+	__REQ_PM_RESUME,	/* resume request */
+	__REQ_PM_SHUTDOWN,	/* shutdown request */
+	__REQ_BAR_PREFLUSH,	/* barrier pre-flush done */
+	__REQ_BAR_POSTFLUSH,	/* barrier post-flush */
+	__REQ_BAR_FLUSH,	/* rq is the flush request */
+	__REQ_NR_BITS,		/* stops here */
+};
+
+#define REQ_RW		(1 << __REQ_RW)
+#define REQ_FAILFAST	(1 << __REQ_FAILFAST)
+#define REQ_SOFTBARRIER	(1 << __REQ_SOFTBARRIER)
+#define REQ_HARDBARRIER	(1 << __REQ_HARDBARRIER)
+#define REQ_CMD		(1 << __REQ_CMD)
+#define REQ_NOMERGE	(1 << __REQ_NOMERGE)
+#define REQ_STARTED	(1 << __REQ_STARTED)
+#define REQ_DONTPREP	(1 << __REQ_DONTPREP)
+#define REQ_QUEUED	(1 << __REQ_QUEUED)
+#define REQ_PC		(1 << __REQ_PC)
+#define REQ_BLOCK_PC	(1 << __REQ_BLOCK_PC)
+#define REQ_SENSE	(1 << __REQ_SENSE)
+#define REQ_FAILED	(1 << __REQ_FAILED)
+#define REQ_QUIET	(1 << __REQ_QUIET)
+#define REQ_SPECIAL	(1 << __REQ_SPECIAL)
+#define REQ_DRIVE_CMD	(1 << __REQ_DRIVE_CMD)
+#define REQ_DRIVE_TASK	(1 << __REQ_DRIVE_TASK)
+#define REQ_DRIVE_TASKFILE	(1 << __REQ_DRIVE_TASKFILE)
+#define REQ_PREEMPT	(1 << __REQ_PREEMPT)
+#define REQ_PM_SUSPEND	(1 << __REQ_PM_SUSPEND)
+#define REQ_PM_RESUME	(1 << __REQ_PM_RESUME)
+#define REQ_PM_SHUTDOWN	(1 << __REQ_PM_SHUTDOWN)
+#define REQ_BAR_PREFLUSH	(1 << __REQ_BAR_PREFLUSH)
+#define REQ_BAR_POSTFLUSH	(1 << __REQ_BAR_POSTFLUSH)
+#define REQ_BAR_FLUSH	(1 << __REQ_BAR_FLUSH)
+
+/*
+ * State information carried for REQ_PM_SUSPEND and REQ_PM_RESUME
+ * requests. Some step values could eventually be made generic.
+ */
+struct request_pm_state
+{
+	/* PM state machine step value, currently driver specific */
+	int	pm_step;
+	/* requested PM state value (S1, S2, S3, S4, ...) */
+	u32	pm_state;
+	void*	data;		/* for driver use */
+};
+
+#include <linux/elevator.h>
+
+typedef int (merge_request_fn) (request_queue_t *, struct request *,
+				struct bio *);
+typedef int (merge_requests_fn) (request_queue_t *, struct request *,
+				 struct request *);
+typedef void (request_fn_proc) (request_queue_t *q);
+typedef int (make_request_fn) (request_queue_t *q, struct bio *bio);
+typedef int (prep_rq_fn) (request_queue_t *, struct request *);
+typedef void (unplug_fn) (request_queue_t *);
+
+struct bio_vec;
+typedef int (merge_bvec_fn) (request_queue_t *, struct bio *, struct bio_vec *);
+typedef void (activity_fn) (void *data, int rw);
+typedef int (issue_flush_fn) (request_queue_t *, struct gendisk *, sector_t *);
+typedef int (prepare_flush_fn) (request_queue_t *, struct request *);
+typedef void (end_flush_fn) (request_queue_t *, struct request *);
+
+enum blk_queue_state {
+	Queue_down,
+	Queue_up,
+};
+
+#define BLK_TAGS_PER_LONG	(sizeof(unsigned long) * 8)
+#define BLK_TAGS_MASK		(BLK_TAGS_PER_LONG - 1)
+
+struct blk_queue_tag {
+	struct request **tag_index;	/* map of busy tags */
+	unsigned long *tag_map;		/* bit map of free/busy tags */
+	struct list_head busy_list;	/* fifo list of busy tags */
+	int busy;			/* current depth */
+	int max_depth;			/* what we will send to device */
+	int real_max_depth;		/* what the array can hold */
+	atomic_t refcnt;		/* map can be shared */
+};
+
+struct request_queue
+{
+	/*
+	 * Together with queue_head for cacheline sharing
+	 */
+	struct list_head	queue_head;
+	struct request		*last_merge;
+	elevator_t		*elevator;
+
+	/*
+	 * the queue request freelist, one for reads and one for writes
+	 */
+	struct request_list	rq;
+
+	request_fn_proc		*request_fn;
+	merge_request_fn	*back_merge_fn;
+	merge_request_fn	*front_merge_fn;
+	merge_requests_fn	*merge_requests_fn;
+	make_request_fn		*make_request_fn;
+	prep_rq_fn		*prep_rq_fn;
+	unplug_fn		*unplug_fn;
+	merge_bvec_fn		*merge_bvec_fn;
+	activity_fn		*activity_fn;
+	issue_flush_fn		*issue_flush_fn;
+	prepare_flush_fn	*prepare_flush_fn;
+	end_flush_fn		*end_flush_fn;
+
+	/*
+	 * Auto-unplugging state
+	 */
+	struct timer_list	unplug_timer;
+	int			unplug_thresh;	/* After this many requests */
+	unsigned long		unplug_delay;	/* After this many jiffies */
+	struct work_struct	unplug_work;
+
+	struct backing_dev_info	backing_dev_info;
+
+	/*
+	 * The queue owner gets to use this for whatever they like.
+	 * ll_rw_blk doesn't touch it.
+	 */
+	void			*queuedata;
+
+	void			*activity_data;
+
+	/*
+	 * queue needs bounce pages for pages above this limit
+	 */
+	unsigned long		bounce_pfn;
+	unsigned int		bounce_gfp;
+
+	/*
+	 * various queue flags, see QUEUE_* below
+	 */
+	unsigned long		queue_flags;
+
+	/*
+	 * protects queue structures from reentrancy
+	 */
+	spinlock_t		*queue_lock;
+
+	/*
+	 * queue kobject
+	 */
+	struct kobject kobj;
+
+	/*
+	 * queue settings
+	 */
+	unsigned long		nr_requests;	/* Max # of requests */
+	unsigned int		nr_congestion_on;
+	unsigned int		nr_congestion_off;
+	unsigned int		nr_batching;
+
+	unsigned short		max_sectors;
+	unsigned short		max_hw_sectors;
+	unsigned short		max_phys_segments;
+	unsigned short		max_hw_segments;
+	unsigned short		hardsect_size;
+	unsigned int		max_segment_size;
+
+	unsigned long		seg_boundary_mask;
+	unsigned int		dma_alignment;
+
+	struct blk_queue_tag	*queue_tags;
+
+	atomic_t		refcnt;
+
+	unsigned int		in_flight;
+
+	/*
+	 * sg stuff
+	 */
+	unsigned int		sg_timeout;
+	unsigned int		sg_reserved_size;
+
+	struct list_head	drain_list;
+
+	/*
+	 * reserved for flush operations
+	 */
+	struct request		*flush_rq;
+	unsigned char		ordered;
+};
+
+enum {
+	QUEUE_ORDERED_NONE,
+	QUEUE_ORDERED_TAG,
+	QUEUE_ORDERED_FLUSH,
+};
+
+#define RQ_INACTIVE		(-1)
+#define RQ_ACTIVE		1
+#define RQ_SCSI_BUSY		0xffff
+#define RQ_SCSI_DONE		0xfffe
+#define RQ_SCSI_DISCONNECTING	0xffe0
+
+#define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
+#define QUEUE_FLAG_QUEUED	1	/* uses generic tag queueing */
+#define QUEUE_FLAG_STOPPED	2	/* queue is stopped */
+#define	QUEUE_FLAG_READFULL	3	/* write queue has been filled */
+#define QUEUE_FLAG_WRITEFULL	4	/* read queue has been filled */
+#define QUEUE_FLAG_DEAD		5	/* queue being torn down */
+#define QUEUE_FLAG_REENTER	6	/* Re-entrancy avoidance */
+#define QUEUE_FLAG_PLUGGED	7	/* queue is plugged */
+#define QUEUE_FLAG_DRAIN	8	/* draining queue for sched switch */
+#define QUEUE_FLAG_FLUSH	9	/* doing barrier flush sequence */
+
+#define blk_queue_plugged(q)	test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
+#define blk_queue_tagged(q)	test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
+#define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
+#define blk_queue_flushing(q)	test_bit(QUEUE_FLAG_FLUSH, &(q)->queue_flags)
+
+#define blk_fs_request(rq)	((rq)->flags & REQ_CMD)
+#define blk_pc_request(rq)	((rq)->flags & REQ_BLOCK_PC)
+#define blk_noretry_request(rq)	((rq)->flags & REQ_FAILFAST)
+#define blk_rq_started(rq)	((rq)->flags & REQ_STARTED)
+
+#define blk_account_rq(rq)	(blk_rq_started(rq) && blk_fs_request(rq))
+
+#define blk_pm_suspend_request(rq)	((rq)->flags & REQ_PM_SUSPEND)
+#define blk_pm_resume_request(rq)	((rq)->flags & REQ_PM_RESUME)
+#define blk_pm_request(rq)	\
+	((rq)->flags & (REQ_PM_SUSPEND | REQ_PM_RESUME))
+
+#define blk_barrier_rq(rq)	((rq)->flags & REQ_HARDBARRIER)
+#define blk_barrier_preflush(rq)	((rq)->flags & REQ_BAR_PREFLUSH)
+#define blk_barrier_postflush(rq)	((rq)->flags & REQ_BAR_POSTFLUSH)
+
+#define list_entry_rq(ptr)	list_entry((ptr), struct request, queuelist)
+
+#define rq_data_dir(rq)		((rq)->flags & 1)
+
+static inline int blk_queue_full(struct request_queue *q, int rw)
+{
+	if (rw == READ)
+		return test_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
+	return test_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
+}
+
+static inline void blk_set_queue_full(struct request_queue *q, int rw)
+{
+	if (rw == READ)
+		set_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
+	else
+		set_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
+}
+
+static inline void blk_clear_queue_full(struct request_queue *q, int rw)
+{
+	if (rw == READ)
+		clear_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
+	else
+		clear_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
+}
+
+
+/*
+ * mergeable request must not have _NOMERGE or _BARRIER bit set, nor may
+ * it already be started by driver.
+ */
+#define RQ_NOMERGE_FLAGS	\
+	(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER)
+#define rq_mergeable(rq)	\
+	(!((rq)->flags & RQ_NOMERGE_FLAGS) && blk_fs_request((rq)))
+
+/*
+ * noop, requests are automagically marked as active/inactive by I/O
+ * scheduler -- see elv_next_request
+ */
+#define blk_queue_headactive(q, head_active)
+
+/*
+ * q->prep_rq_fn return values
+ */
+#define BLKPREP_OK		0	/* serve it */
+#define BLKPREP_KILL		1	/* fatal error, kill */
+#define BLKPREP_DEFER		2	/* leave on queue */
+
+extern unsigned long blk_max_low_pfn, blk_max_pfn;
+
+/*
+ * standard bounce addresses:
+ *
+ * BLK_BOUNCE_HIGH	: bounce all highmem pages
+ * BLK_BOUNCE_ANY	: don't bounce anything
+ * BLK_BOUNCE_ISA	: bounce pages above ISA DMA boundary
+ */
+#define BLK_BOUNCE_HIGH		((u64)blk_max_low_pfn << PAGE_SHIFT)
+#define BLK_BOUNCE_ANY		((u64)blk_max_pfn << PAGE_SHIFT)
+#define BLK_BOUNCE_ISA		(ISA_DMA_THRESHOLD)
+
+#ifdef CONFIG_MMU
+extern int init_emergency_isa_pool(void);
+extern void blk_queue_bounce(request_queue_t *q, struct bio **bio);
+#else
+static inline int init_emergency_isa_pool(void)
+{
+	return 0;
+}
+static inline void blk_queue_bounce(request_queue_t *q, struct bio **bio)
+{
+}
+#endif /* CONFIG_MMU */
+
+#define rq_for_each_bio(_bio, rq)	\
+	if ((rq->bio))			\
+		for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
+
+struct sec_size {
+	unsigned block_size;
+	unsigned block_size_bits;
+};
+
+extern int blk_register_queue(struct gendisk *disk);
+extern void blk_unregister_queue(struct gendisk *disk);
+extern void register_disk(struct gendisk *dev);
+extern void generic_make_request(struct bio *bio);
+extern void blk_put_request(struct request *);
+extern void blk_end_sync_rq(struct request *rq);
+extern void blk_attempt_remerge(request_queue_t *, struct request *);
+extern void __blk_attempt_remerge(request_queue_t *, struct request *);
+extern struct request *blk_get_request(request_queue_t *, int, int);
+extern void blk_insert_request(request_queue_t *, struct request *, int, void *, int);
+extern void blk_requeue_request(request_queue_t *, struct request *);
+extern void blk_plug_device(request_queue_t *);
+extern int blk_remove_plug(request_queue_t *);
+extern void blk_recount_segments(request_queue_t *, struct bio *);
+extern int blk_phys_contig_segment(request_queue_t *q, struct bio *, struct bio *);
+extern int blk_hw_contig_segment(request_queue_t *q, struct bio *, struct bio *);
+extern int scsi_cmd_ioctl(struct file *, struct gendisk *, unsigned int, void __user *);
+extern void blk_start_queue(request_queue_t *q);
+extern void blk_stop_queue(request_queue_t *q);
+extern void blk_sync_queue(struct request_queue *q);
+extern void __blk_stop_queue(request_queue_t *q);
+extern void blk_run_queue(request_queue_t *);
+extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *);
+extern struct request *blk_rq_map_user(request_queue_t *, int, void __user *, unsigned int);
+extern int blk_rq_unmap_user(struct request *, struct bio *, unsigned int);
+extern int blk_execute_rq(request_queue_t *, struct gendisk *, struct request *);
+
+static inline request_queue_t *bdev_get_queue(struct block_device *bdev)
+{
+	return bdev->bd_disk->queue;
+}
+
+static inline void blk_run_backing_dev(struct backing_dev_info *bdi,
+				       struct page *page)
+{
+	if (bdi && bdi->unplug_io_fn)
+		bdi->unplug_io_fn(bdi, page);
+}
+
+static inline void blk_run_address_space(struct address_space *mapping)
+{
+	if (mapping)
+		blk_run_backing_dev(mapping->backing_dev_info, NULL);
+}
+
+/*
+ * end_request() and friends. Must be called with the request queue spinlock
+ * acquired. All functions called within end_request() _must_be_ atomic.
+ *
+ * Several drivers define their own end_request and call
+ * end_that_request_first() and end_that_request_last()
+ * for parts of the original function. This prevents
+ * code duplication in drivers.
+ */
+extern int end_that_request_first(struct request *, int, int);
+extern int end_that_request_chunk(struct request *, int, int);
+extern void end_that_request_last(struct request *);
+extern void end_request(struct request *req, int uptodate);
+
+/*
+ * end_that_request_first/chunk() takes an uptodate argument. we account
+ * any value <= as an io error. 0 means -EIO for compatability reasons,
+ * any other < 0 value is the direct error type. An uptodate value of
+ * 1 indicates successful io completion
+ */
+#define end_io_error(uptodate)	(unlikely((uptodate) <= 0))
+
+static inline void blkdev_dequeue_request(struct request *req)
+{
+	BUG_ON(list_empty(&req->queuelist));
+
+	list_del_init(&req->queuelist);
+
+	if (req->rl)
+		elv_remove_request(req->q, req);
+}
+
+/*
+ * Access functions for manipulating queue properties
+ */
+extern request_queue_t *blk_init_queue(request_fn_proc *, spinlock_t *);
+extern void blk_cleanup_queue(request_queue_t *);
+extern void blk_queue_make_request(request_queue_t *, make_request_fn *);
+extern void blk_queue_bounce_limit(request_queue_t *, u64);
+extern void blk_queue_max_sectors(request_queue_t *, unsigned short);
+extern void blk_queue_max_phys_segments(request_queue_t *, unsigned short);
+extern void blk_queue_max_hw_segments(request_queue_t *, unsigned short);
+extern void blk_queue_max_segment_size(request_queue_t *, unsigned int);
+extern void blk_queue_hardsect_size(request_queue_t *, unsigned short);
+extern void blk_queue_stack_limits(request_queue_t *t, request_queue_t *b);
+extern void blk_queue_segment_boundary(request_queue_t *, unsigned long);
+extern void blk_queue_prep_rq(request_queue_t *, prep_rq_fn *pfn);
+extern void blk_queue_merge_bvec(request_queue_t *, merge_bvec_fn *);
+extern void blk_queue_dma_alignment(request_queue_t *, int);
+extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
+extern void blk_queue_ordered(request_queue_t *, int);
+extern void blk_queue_issue_flush_fn(request_queue_t *, issue_flush_fn *);
+extern int blkdev_scsi_issue_flush_fn(request_queue_t *, struct gendisk *, sector_t *);
+extern struct request *blk_start_pre_flush(request_queue_t *,struct request *);
+extern int blk_complete_barrier_rq(request_queue_t *, struct request *, int);
+extern int blk_complete_barrier_rq_locked(request_queue_t *, struct request *, int);
+
+extern int blk_rq_map_sg(request_queue_t *, struct request *, struct scatterlist *);
+extern void blk_dump_rq_flags(struct request *, char *);
+extern void generic_unplug_device(request_queue_t *);
+extern void __generic_unplug_device(request_queue_t *);
+extern long nr_blockdev_pages(void);
+extern void blk_wait_queue_drained(request_queue_t *, int);
+extern void blk_finish_queue_drain(request_queue_t *);
+
+int blk_get_queue(request_queue_t *);
+request_queue_t *blk_alloc_queue(int);
+#define blk_put_queue(q) blk_cleanup_queue((q))
+
+/*
+ * tag stuff
+ */
+#define blk_queue_tag_depth(q)		((q)->queue_tags->busy)
+#define blk_queue_tag_queue(q)		((q)->queue_tags->busy < (q)->queue_tags->max_depth)
+#define blk_rq_tagged(rq)		((rq)->flags & REQ_QUEUED)
+extern int blk_queue_start_tag(request_queue_t *, struct request *);
+extern struct request *blk_queue_find_tag(request_queue_t *, int);
+extern void blk_queue_end_tag(request_queue_t *, struct request *);
+extern int blk_queue_init_tags(request_queue_t *, int, struct blk_queue_tag *);
+extern void blk_queue_free_tags(request_queue_t *);
+extern int blk_queue_resize_tags(request_queue_t *, int);
+extern void blk_queue_invalidate_tags(request_queue_t *);
+extern long blk_congestion_wait(int rw, long timeout);
+
+extern void blk_rq_bio_prep(request_queue_t *, struct request *, struct bio *);
+extern int blkdev_issue_flush(struct block_device *, sector_t *);
+
+#define MAX_PHYS_SEGMENTS 128
+#define MAX_HW_SEGMENTS 128
+#define MAX_SECTORS 255
+
+#define MAX_SEGMENT_SIZE	65536
+
+#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
+
+extern void drive_stat_acct(struct request *, int, int);
+
+static inline int queue_hardsect_size(request_queue_t *q)
+{
+	int retval = 512;
+
+	if (q && q->hardsect_size)
+		retval = q->hardsect_size;
+
+	return retval;
+}
+
+static inline int bdev_hardsect_size(struct block_device *bdev)
+{
+	return queue_hardsect_size(bdev_get_queue(bdev));
+}
+
+static inline int queue_dma_alignment(request_queue_t *q)
+{
+	int retval = 511;
+
+	if (q && q->dma_alignment)
+		retval = q->dma_alignment;
+
+	return retval;
+}
+
+static inline int bdev_dma_aligment(struct block_device *bdev)
+{
+	return queue_dma_alignment(bdev_get_queue(bdev));
+}
+
+#define blk_finished_io(nsects)	do { } while (0)
+#define blk_started_io(nsects)	do { } while (0)
+
+/* assumes size > 256 */
+static inline unsigned int blksize_bits(unsigned int size)
+{
+	unsigned int bits = 8;
+	do {
+		bits++;
+		size >>= 1;
+	} while (size > 256);
+	return bits;
+}
+
+extern inline unsigned int block_size(struct block_device *bdev)
+{
+	return bdev->bd_block_size;
+}
+
+typedef struct {struct page *v;} Sector;
+
+unsigned char *read_dev_sector(struct block_device *, sector_t, Sector *);
+
+static inline void put_dev_sector(Sector p)
+{
+	page_cache_release(p.v);
+}
+
+struct work_struct;
+int kblockd_schedule_work(struct work_struct *work);
+void kblockd_flush(void);
+
+#ifdef CONFIG_LBD
+# include <asm/div64.h>
+# define sector_div(a, b) do_div(a, b)
+#else
+# define sector_div(n, b)( \
+{ \
+	int _res; \
+	_res = (n) % (b); \
+	(n) /= (b); \
+	_res; \
+} \
+)
+#endif 
+
+#define MODULE_ALIAS_BLOCKDEV(major,minor) \
+	MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
+#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
+	MODULE_ALIAS("block-major-" __stringify(major) "-*")
+
+
+#endif
diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h
new file mode 100644
index 000000000000..be5d0f4ad24c
--- /dev/null
+++ b/include/linux/blkpg.h
@@ -0,0 +1,57 @@
+#ifndef _LINUX_BLKPG_H
+#define _LINUX_BLKPG_H
+
+/*
+ * Partition table and disk geometry handling
+ *
+ * A single ioctl with lots of subfunctions:
+ *
+ * Device number stuff:
+ *    get_whole_disk()		(given the device number of a partition,
+ *                               find the device number of the encompassing disk)
+ *    get_all_partitions()	(given the device number of a disk, return the
+ *				 device numbers of all its known partitions)
+ *
+ * Partition stuff:
+ *    add_partition()
+ *    delete_partition()
+ *    test_partition_in_use()	(also for test_disk_in_use)
+ *
+ * Geometry stuff:
+ *    get_geometry()
+ *    set_geometry()
+ *    get_bios_drivedata()
+ *
+ * For today, only the partition stuff - aeb, 990515
+ */
+#include <linux/ioctl.h>
+
+#define BLKPG      _IO(0x12,105)
+
+/* The argument structure */
+struct blkpg_ioctl_arg {
+        int op;
+        int flags;
+        int datalen;
+        void __user *data;
+};
+
+/* The subfunctions (for the op field) */
+#define BLKPG_ADD_PARTITION	1
+#define BLKPG_DEL_PARTITION	2
+
+/* Sizes of name fields. Unused at present. */
+#define BLKPG_DEVNAMELTH	64
+#define BLKPG_VOLNAMELTH	64
+
+/* The data structure for ADD_PARTITION and DEL_PARTITION */
+struct blkpg_partition {
+	long long start;		/* starting offset in bytes */
+	long long length;		/* length in bytes */
+	int pno;			/* partition number */
+	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
+					   to be used in kernel messages */
+	char volname[BLKPG_VOLNAMELTH];	/* volume label */
+};
+
+#endif /* _LINUX_BLKPG_H */
diff --git a/include/linux/blockgroup_lock.h b/include/linux/blockgroup_lock.h
new file mode 100644
index 000000000000..0137ee5dd43c
--- /dev/null
+++ b/include/linux/blockgroup_lock.h
@@ -0,0 +1,60 @@
+#ifndef _LINUX_BLOCKGROUP_LOCK_H
+#define _LINUX_BLOCKGROUP_LOCK_H
+/*
+ * Per-blockgroup locking for ext2 and ext3.
+ *
+ * Simple hashed spinlocking.
+ */
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+#ifdef CONFIG_SMP
+
+/*
+ * We want a power-of-two.  Is there a better way than this?
+ */
+
+#if NR_CPUS >= 32
+#define NR_BG_LOCKS	128
+#elif NR_CPUS >= 16
+#define NR_BG_LOCKS	64
+#elif NR_CPUS >= 8
+#define NR_BG_LOCKS	32
+#elif NR_CPUS >= 4
+#define NR_BG_LOCKS	16
+#elif NR_CPUS >= 2
+#define NR_BG_LOCKS	8
+#else
+#define NR_BG_LOCKS	4
+#endif
+
+#else	/* CONFIG_SMP */
+#define NR_BG_LOCKS	1
+#endif	/* CONFIG_SMP */
+
+struct bgl_lock {
+	spinlock_t lock;
+} ____cacheline_aligned_in_smp;
+
+struct blockgroup_lock {
+	struct bgl_lock locks[NR_BG_LOCKS];
+};
+
+static inline void bgl_lock_init(struct blockgroup_lock *bgl)
+{
+	int i;
+
+	for (i = 0; i < NR_BG_LOCKS; i++)
+		spin_lock_init(&bgl->locks[i].lock);
+}
+
+/*
+ * The accessor is a macro so we can embed a blockgroup_lock into different
+ * superblock types
+ */
+#define sb_bgl_lock(sb, block_group) \
+	(&(sb)->s_blockgroup_lock.locks[(block_group) & (NR_BG_LOCKS-1)].lock)
+
+#endif
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
new file mode 100644
index 000000000000..0dd8ca1a3d5a
--- /dev/null
+++ b/include/linux/bootmem.h
@@ -0,0 +1,96 @@
+/*
+ * Discontiguous memory support, Kanoj Sarcar, SGI, Nov 1999
+ */
+#ifndef _LINUX_BOOTMEM_H
+#define _LINUX_BOOTMEM_H
+
+#include <asm/pgtable.h>
+#include <asm/dma.h>
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/mmzone.h>
+
+/*
+ *  simple boot-time physical memory area allocator.
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+
+/*
+ * highest page
+ */
+extern unsigned long max_pfn;
+
+/*
+ * node_bootmem_map is a map pointer - the bits represent all physical 
+ * memory pages (including holes) on the node.
+ */
+typedef struct bootmem_data {
+	unsigned long node_boot_start;
+	unsigned long node_low_pfn;
+	void *node_bootmem_map;
+	unsigned long last_offset;
+	unsigned long last_pos;
+	unsigned long last_success;	/* Previous allocation point.  To speed
+					 * up searching */
+} bootmem_data_t;
+
+extern unsigned long __init bootmem_bootmap_pages (unsigned long);
+extern unsigned long __init init_bootmem (unsigned long addr, unsigned long memend);
+extern void __init free_bootmem (unsigned long addr, unsigned long size);
+extern void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+extern void __init reserve_bootmem (unsigned long addr, unsigned long size);
+#define alloc_bootmem(x) \
+	__alloc_bootmem((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low(x) \
+	__alloc_bootmem((x), SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_pages(x) \
+	__alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages(x) \
+	__alloc_bootmem((x), PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+extern unsigned long __init free_all_bootmem (void);
+
+extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn);
+extern void __init reserve_bootmem_node (pg_data_t *pgdat, unsigned long physaddr, unsigned long size);
+extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size);
+extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat);
+extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+#define alloc_bootmem_node(pgdat, x) \
+	__alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_node(pgdat, x) \
+	__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages_node(pgdat, x) \
+	__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+
+extern unsigned long __initdata nr_kernel_pages;
+extern unsigned long __initdata nr_all_pages;
+
+extern void *__init alloc_large_system_hash(const char *tablename,
+					    unsigned long bucketsize,
+					    unsigned long numentries,
+					    int scale,
+					    int flags,
+					    unsigned int *_hash_shift,
+					    unsigned int *_hash_mask,
+					    unsigned long limit);
+
+#define HASH_HIGHMEM	0x00000001	/* Consider highmem? */
+#define HASH_EARLY	0x00000002	/* Allocating during early boot? */
+
+/* Only NUMA needs hash distribution.
+ * IA64 is known to have sufficient vmalloc space.
+ */
+#if defined(CONFIG_NUMA) && defined(CONFIG_IA64)
+#define HASHDIST_DEFAULT 1
+#else
+#define HASHDIST_DEFAULT 0
+#endif
+extern int __initdata hashdist;		/* Distribute hashes across NUMA nodes? */
+
+
+#endif /* _LINUX_BOOTMEM_H */
diff --git a/include/linux/bpqether.h b/include/linux/bpqether.h
new file mode 100644
index 000000000000..a6c35e1a89ad
--- /dev/null
+++ b/include/linux/bpqether.h
@@ -0,0 +1,41 @@
+#ifndef	__BPQETHER_H
+#define	__BPQETHER_H
+
+/*
+ * 	Defines for the BPQETHER pseudo device driver
+ */
+
+#ifndef __LINUX_IF_ETHER_H
+#include <linux/if_ether.h>
+#endif
+
+#define SIOCSBPQETHOPT		(SIOCDEVPRIVATE+0)	/* reserved */
+#define SIOCSBPQETHADDR		(SIOCDEVPRIVATE+1)
+ 
+struct bpq_ethaddr {
+	unsigned char destination[ETH_ALEN];
+	unsigned char accept[ETH_ALEN];
+};
+
+/* 
+ * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
+ * currently not implemented, though. If someone wants to hook a radio
+ * to his Ethernet card he may find this useful. ;-)
+ */
+
+#define SIOCGBPQETHPARAM	0x5000  /* get Level 1 parameters */
+#define SIOCSBPQETHPARAM	0x5001  /* set */
+
+struct bpq_req  {
+    int cmd;
+    int speed;			/* unused */
+    int clockmode;		/* unused */
+    int txdelay;
+    unsigned char persist;	/* unused */
+    int slotime;		/* unused */
+    int squeldelay;
+    int dmachan;		/* unused */
+    int irq;			/* unused */
+};
+
+#endif
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
new file mode 100644
index 000000000000..802c91e9b3da
--- /dev/null
+++ b/include/linux/buffer_head.h
@@ -0,0 +1,296 @@
+/*
+ * include/linux/buffer_head.h
+ *
+ * Everything to do with buffer_heads.
+ */
+
+#ifndef _LINUX_BUFFER_HEAD_H
+#define _LINUX_BUFFER_HEAD_H
+
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/linkage.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+enum bh_state_bits {
+	BH_Uptodate,	/* Contains valid data */
+	BH_Dirty,	/* Is dirty */
+	BH_Lock,	/* Is locked */
+	BH_Req,		/* Has been submitted for I/O */
+
+	BH_Mapped,	/* Has a disk mapping */
+	BH_New,		/* Disk mapping was newly created by get_block */
+	BH_Async_Read,	/* Is under end_buffer_async_read I/O */
+	BH_Async_Write,	/* Is under end_buffer_async_write I/O */
+	BH_Delay,	/* Buffer is not yet allocated on disk */
+	BH_Boundary,	/* Block is followed by a discontiguity */
+	BH_Write_EIO,	/* I/O error on write */
+	BH_Ordered,	/* ordered write */
+	BH_Eopnotsupp,	/* operation not supported (barrier) */
+
+	BH_PrivateStart,/* not a state bit, but the first bit available
+			 * for private allocation by other entities
+			 */
+};
+
+#define MAX_BUF_PER_PAGE (PAGE_CACHE_SIZE / 512)
+
+struct page;
+struct buffer_head;
+struct address_space;
+typedef void (bh_end_io_t)(struct buffer_head *bh, int uptodate);
+
+/*
+ * Keep related fields in common cachelines.  The most commonly accessed
+ * field (b_state) goes at the start so the compiler does not generate
+ * indexed addressing for it.
+ */
+struct buffer_head {
+	/* First cache line: */
+	unsigned long b_state;		/* buffer state bitmap (see above) */
+	struct buffer_head *b_this_page;/* circular list of page's buffers */
+	struct page *b_page;		/* the page this bh is mapped to */
+	atomic_t b_count;		/* users using this block */
+	u32 b_size;			/* block size */
+
+	sector_t b_blocknr;		/* block number */
+	char *b_data;			/* pointer to data block */
+
+	struct block_device *b_bdev;
+	bh_end_io_t *b_end_io;		/* I/O completion */
+ 	void *b_private;		/* reserved for b_end_io */
+	struct list_head b_assoc_buffers; /* associated with another mapping */
+};
+
+/*
+ * macro tricks to expand the set_buffer_foo(), clear_buffer_foo()
+ * and buffer_foo() functions.
+ */
+#define BUFFER_FNS(bit, name)						\
+static inline void set_buffer_##name(struct buffer_head *bh)		\
+{									\
+	set_bit(BH_##bit, &(bh)->b_state);				\
+}									\
+static inline void clear_buffer_##name(struct buffer_head *bh)		\
+{									\
+	clear_bit(BH_##bit, &(bh)->b_state);				\
+}									\
+static inline int buffer_##name(const struct buffer_head *bh)		\
+{									\
+	return test_bit(BH_##bit, &(bh)->b_state);			\
+}
+
+/*
+ * test_set_buffer_foo() and test_clear_buffer_foo()
+ */
+#define TAS_BUFFER_FNS(bit, name)					\
+static inline int test_set_buffer_##name(struct buffer_head *bh)	\
+{									\
+	return test_and_set_bit(BH_##bit, &(bh)->b_state);		\
+}									\
+static inline int test_clear_buffer_##name(struct buffer_head *bh)	\
+{									\
+	return test_and_clear_bit(BH_##bit, &(bh)->b_state);		\
+}									\
+
+/*
+ * Emit the buffer bitops functions.   Note that there are also functions
+ * of the form "mark_buffer_foo()".  These are higher-level functions which
+ * do something in addition to setting a b_state bit.
+ */
+BUFFER_FNS(Uptodate, uptodate)
+BUFFER_FNS(Dirty, dirty)
+TAS_BUFFER_FNS(Dirty, dirty)
+BUFFER_FNS(Lock, locked)
+TAS_BUFFER_FNS(Lock, locked)
+BUFFER_FNS(Req, req)
+TAS_BUFFER_FNS(Req, req)
+BUFFER_FNS(Mapped, mapped)
+BUFFER_FNS(New, new)
+BUFFER_FNS(Async_Read, async_read)
+BUFFER_FNS(Async_Write, async_write)
+BUFFER_FNS(Delay, delay)
+BUFFER_FNS(Boundary, boundary)
+BUFFER_FNS(Write_EIO, write_io_error)
+BUFFER_FNS(Ordered, ordered)
+BUFFER_FNS(Eopnotsupp, eopnotsupp)
+
+#define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
+#define touch_buffer(bh)	mark_page_accessed(bh->b_page)
+
+/* If we *know* page->private refers to buffer_heads */
+#define page_buffers(page)					\
+	({							\
+		BUG_ON(!PagePrivate(page));		\
+		((struct buffer_head *)(page)->private);	\
+	})
+#define page_has_buffers(page)	PagePrivate(page)
+
+/*
+ * Declarations
+ */
+
+void FASTCALL(mark_buffer_dirty(struct buffer_head *bh));
+void init_buffer(struct buffer_head *, bh_end_io_t *, void *);
+void set_bh_page(struct buffer_head *bh,
+		struct page *page, unsigned long offset);
+int try_to_free_buffers(struct page *);
+struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size,
+		int retry);
+void create_empty_buffers(struct page *, unsigned long,
+			unsigned long b_state);
+void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
+
+/* Things to do with buffers at mapping->private_list */
+void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
+int inode_has_buffers(struct inode *);
+void invalidate_inode_buffers(struct inode *);
+int remove_inode_buffers(struct inode *inode);
+int sync_mapping_buffers(struct address_space *mapping);
+void unmap_underlying_metadata(struct block_device *bdev, sector_t block);
+
+void mark_buffer_async_write(struct buffer_head *bh);
+void invalidate_bdev(struct block_device *, int);
+int sync_blockdev(struct block_device *bdev);
+void __wait_on_buffer(struct buffer_head *);
+wait_queue_head_t *bh_waitq_head(struct buffer_head *bh);
+int fsync_bdev(struct block_device *);
+struct super_block *freeze_bdev(struct block_device *);
+void thaw_bdev(struct block_device *, struct super_block *);
+int fsync_super(struct super_block *);
+int fsync_no_super(struct block_device *);
+struct buffer_head *__find_get_block(struct block_device *, sector_t, int);
+struct buffer_head * __getblk(struct block_device *, sector_t, int);
+void __brelse(struct buffer_head *);
+void __bforget(struct buffer_head *);
+void __breadahead(struct block_device *, sector_t block, int size);
+struct buffer_head *__bread(struct block_device *, sector_t block, int size);
+struct buffer_head *alloc_buffer_head(unsigned int __nocast gfp_flags);
+void free_buffer_head(struct buffer_head * bh);
+void FASTCALL(unlock_buffer(struct buffer_head *bh));
+void FASTCALL(__lock_buffer(struct buffer_head *bh));
+void ll_rw_block(int, int, struct buffer_head * bh[]);
+int sync_dirty_buffer(struct buffer_head *bh);
+int submit_bh(int, struct buffer_head *);
+void write_boundary_block(struct block_device *bdev,
+			sector_t bblock, unsigned blocksize);
+
+extern int buffer_heads_over_limit;
+
+/*
+ * Generic address_space_operations implementations for buffer_head-backed
+ * address_spaces.
+ */
+int try_to_release_page(struct page * page, int gfp_mask);
+int block_invalidatepage(struct page *page, unsigned long offset);
+int block_write_full_page(struct page *page, get_block_t *get_block,
+				struct writeback_control *wbc);
+int block_read_full_page(struct page*, get_block_t*);
+int block_prepare_write(struct page*, unsigned, unsigned, get_block_t*);
+int cont_prepare_write(struct page*, unsigned, unsigned, get_block_t*,
+				loff_t *);
+int generic_cont_expand(struct inode *inode, loff_t size) ;
+int block_commit_write(struct page *page, unsigned from, unsigned to);
+int block_sync_page(struct page *);
+sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
+int generic_commit_write(struct file *, struct page *, unsigned, unsigned);
+int block_truncate_page(struct address_space *, loff_t, get_block_t *);
+int file_fsync(struct file *, struct dentry *, int);
+int nobh_prepare_write(struct page*, unsigned, unsigned, get_block_t*);
+int nobh_commit_write(struct file *, struct page *, unsigned, unsigned);
+int nobh_truncate_page(struct address_space *, loff_t);
+int nobh_writepage(struct page *page, get_block_t *get_block,
+                        struct writeback_control *wbc);
+
+
+/*
+ * inline definitions
+ */
+
+static inline void attach_page_buffers(struct page *page,
+		struct buffer_head *head)
+{
+	page_cache_get(page);
+	SetPagePrivate(page);
+	page->private = (unsigned long)head;
+}
+
+static inline void get_bh(struct buffer_head *bh)
+{
+        atomic_inc(&bh->b_count);
+}
+
+static inline void put_bh(struct buffer_head *bh)
+{
+        smp_mb__before_atomic_dec();
+        atomic_dec(&bh->b_count);
+}
+
+static inline void brelse(struct buffer_head *bh)
+{
+	if (bh)
+		__brelse(bh);
+}
+
+static inline void bforget(struct buffer_head *bh)
+{
+	if (bh)
+		__bforget(bh);
+}
+
+static inline struct buffer_head *
+sb_bread(struct super_block *sb, sector_t block)
+{
+	return __bread(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline void
+sb_breadahead(struct super_block *sb, sector_t block)
+{
+	__breadahead(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline struct buffer_head *
+sb_getblk(struct super_block *sb, sector_t block)
+{
+	return __getblk(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline struct buffer_head *
+sb_find_get_block(struct super_block *sb, sector_t block)
+{
+	return __find_get_block(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline void
+map_bh(struct buffer_head *bh, struct super_block *sb, sector_t block)
+{
+	set_buffer_mapped(bh);
+	bh->b_bdev = sb->s_bdev;
+	bh->b_blocknr = block;
+}
+
+/*
+ * Calling wait_on_buffer() for a zero-ref buffer is illegal, so we call into
+ * __wait_on_buffer() just to trip a debug check.  Because debug code in inline
+ * functions is bloaty.
+ */
+static inline void wait_on_buffer(struct buffer_head *bh)
+{
+	might_sleep();
+	if (buffer_locked(bh) || atomic_read(&bh->b_count) == 0)
+		__wait_on_buffer(bh);
+}
+
+static inline void lock_buffer(struct buffer_head *bh)
+{
+	might_sleep();
+	if (test_set_buffer_locked(bh))
+		__lock_buffer(bh);
+}
+
+#endif /* _LINUX_BUFFER_HEAD_H */
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
new file mode 100644
index 000000000000..bef87891cb24
--- /dev/null
+++ b/include/linux/byteorder/big_endian.h
@@ -0,0 +1,106 @@
+#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
+#define _LINUX_BYTEORDER_BIG_ENDIAN_H
+
+#ifndef __BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#endif
+#ifndef __BIG_ENDIAN_BITFIELD
+#define __BIG_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/byteorder/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return (__force __u16)*p;
+}
+#define __cpu_to_le64s(x) __swab64s((x))
+#define __le64_to_cpus(x) __swab64s((x))
+#define __cpu_to_le32s(x) __swab32s((x))
+#define __le32_to_cpus(x) __swab32s((x))
+#define __cpu_to_le16s(x) __swab16s((x))
+#define __le16_to_cpus(x) __swab16s((x))
+#define __cpu_to_be64s(x) do {} while (0)
+#define __be64_to_cpus(x) do {} while (0)
+#define __cpu_to_be32s(x) do {} while (0)
+#define __be32_to_cpus(x) do {} while (0)
+#define __cpu_to_be16s(x) do {} while (0)
+#define __be16_to_cpus(x) do {} while (0)
+
+#include <linux/byteorder/generic.h>
+
+#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/generic.h b/include/linux/byteorder/generic.h
new file mode 100644
index 000000000000..5fde6f4d6c1e
--- /dev/null
+++ b/include/linux/byteorder/generic.h
@@ -0,0 +1,172 @@
+#ifndef _LINUX_BYTEORDER_GENERIC_H
+#define _LINUX_BYTEORDER_GENERIC_H
+
+/*
+ * linux/byteorder_generic.h
+ * Generic Byte-reordering support
+ *
+ * Francois-Rene Rideau <fare@tunes.org> 19970707
+ *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
+ *    cleaned them up.
+ *    I hope it is compliant with non-GCC compilers.
+ *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
+ *    because I wasn't sure it would be ok to put it in types.h
+ *    Upgraded it to 2.1.43
+ * Francois-Rene Rideau <fare@tunes.org> 19971012
+ *    Upgraded it to 2.1.57
+ *    to please Linus T., replaced huge #ifdef's between little/big endian
+ *    by nestedly #include'd files.
+ * Francois-Rene Rideau <fare@tunes.org> 19971205
+ *    Made it to 2.1.71; now a facelift:
+ *    Put files under include/linux/byteorder/
+ *    Split swab from generic support.
+ *
+ * TODO:
+ *   = Regular kernel maintainers could also replace all these manual
+ *    byteswap macros that remain, disseminated among drivers,
+ *    after some grep or the sources...
+ *   = Linus might want to rename all these macros and files to fit his taste,
+ *    to fit his personal naming scheme.
+ *   = it seems that a few drivers would also appreciate
+ *    nybble swapping support...
+ *   = every architecture could add their byteswap macro in asm/byteorder.h
+ *    see how some architectures already do (i386, alpha, ppc, etc)
+ *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
+ *    distinguished throughout the kernel. This is not the case currently,
+ *    since little endian, big endian, and pdp endian machines needn't it.
+ *    But this might be the case for, say, a port of Linux to 20/21 bit
+ *    architectures (and F21 Linux addict around?).
+ */
+
+/*
+ * The following macros are to be defined by <asm/byteorder.h>:
+ *
+ * Conversion of long and short int between network and host format
+ *	ntohl(__u32 x)
+ *	ntohs(__u16 x)
+ *	htonl(__u32 x)
+ *	htons(__u16 x)
+ * It seems that some programs (which? where? or perhaps a standard? POSIX?)
+ * might like the above to be functions, not macros (why?).
+ * if that's true, then detect them, and take measures.
+ * Anyway, the measure is: define only ___ntohl as a macro instead,
+ * and in a separate file, have
+ * unsigned long inline ntohl(x){return ___ntohl(x);}
+ *
+ * The same for constant arguments
+ *	__constant_ntohl(__u32 x)
+ *	__constant_ntohs(__u16 x)
+ *	__constant_htonl(__u32 x)
+ *	__constant_htons(__u16 x)
+ *
+ * Conversion of XX-bit integers (16- 32- or 64-)
+ * between native CPU format and little/big endian format
+ * 64-bit stuff only defined for proper architectures
+ *	cpu_to_[bl]eXX(__uXX x)
+ *	[bl]eXX_to_cpu(__uXX x)
+ *
+ * The same, but takes a pointer to the value to convert
+ *	cpu_to_[bl]eXXp(__uXX x)
+ *	[bl]eXX_to_cpup(__uXX x)
+ *
+ * The same, but change in situ
+ *	cpu_to_[bl]eXXs(__uXX x)
+ *	[bl]eXX_to_cpus(__uXX x)
+ *
+ * See asm-foo/byteorder.h for examples of how to provide
+ * architecture-optimized versions
+ *
+ */
+
+
+#if defined(__KERNEL__)
+/*
+ * inside the kernel, we can use nicknames;
+ * outside of it, we must avoid POSIX namespace pollution...
+ */
+#define cpu_to_le64 __cpu_to_le64
+#define le64_to_cpu __le64_to_cpu
+#define cpu_to_le32 __cpu_to_le32
+#define le32_to_cpu __le32_to_cpu
+#define cpu_to_le16 __cpu_to_le16
+#define le16_to_cpu __le16_to_cpu
+#define cpu_to_be64 __cpu_to_be64
+#define be64_to_cpu __be64_to_cpu
+#define cpu_to_be32 __cpu_to_be32
+#define be32_to_cpu __be32_to_cpu
+#define cpu_to_be16 __cpu_to_be16
+#define be16_to_cpu __be16_to_cpu
+#define cpu_to_le64p __cpu_to_le64p
+#define le64_to_cpup __le64_to_cpup
+#define cpu_to_le32p __cpu_to_le32p
+#define le32_to_cpup __le32_to_cpup
+#define cpu_to_le16p __cpu_to_le16p
+#define le16_to_cpup __le16_to_cpup
+#define cpu_to_be64p __cpu_to_be64p
+#define be64_to_cpup __be64_to_cpup
+#define cpu_to_be32p __cpu_to_be32p
+#define be32_to_cpup __be32_to_cpup
+#define cpu_to_be16p __cpu_to_be16p
+#define be16_to_cpup __be16_to_cpup
+#define cpu_to_le64s __cpu_to_le64s
+#define le64_to_cpus __le64_to_cpus
+#define cpu_to_le32s __cpu_to_le32s
+#define le32_to_cpus __le32_to_cpus
+#define cpu_to_le16s __cpu_to_le16s
+#define le16_to_cpus __le16_to_cpus
+#define cpu_to_be64s __cpu_to_be64s
+#define be64_to_cpus __be64_to_cpus
+#define cpu_to_be32s __cpu_to_be32s
+#define be32_to_cpus __be32_to_cpus
+#define cpu_to_be16s __cpu_to_be16s
+#define be16_to_cpus __be16_to_cpus
+#endif
+
+
+#if defined(__KERNEL__)
+/*
+ * Handle ntohl and suches. These have various compatibility
+ * issues - like we want to give the prototype even though we
+ * also have a macro for them in case some strange program
+ * wants to take the address of the thing or something..
+ *
+ * Note that these used to return a "long" in libc5, even though
+ * long is often 64-bit these days.. Thus the casts.
+ *
+ * They have to be macros in order to do the constant folding
+ * correctly - if the argument passed into a inline function
+ * it is no longer constant according to gcc..
+ */
+
+#undef ntohl
+#undef ntohs
+#undef htonl
+#undef htons
+
+/*
+ * Do the prototypes. Somebody might want to take the
+ * address or some such sick thing..
+ */
+extern __u32			ntohl(__be32);
+extern __be32			htonl(__u32);
+extern __u16			ntohs(__be16);
+extern __be16			htons(__u16);
+
+#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__)
+
+#define ___htonl(x) __cpu_to_be32(x)
+#define ___htons(x) __cpu_to_be16(x)
+#define ___ntohl(x) __be32_to_cpu(x)
+#define ___ntohs(x) __be16_to_cpu(x)
+
+#define htonl(x) ___htonl(x)
+#define ntohl(x) ___ntohl(x)
+#define htons(x) ___htons(x)
+#define ntohs(x) ___ntohs(x)
+
+#endif /* OPTIMIZE */
+
+#endif /* KERNEL */
+
+
+#endif /* _LINUX_BYTEORDER_GENERIC_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
new file mode 100644
index 000000000000..86e62b750176
--- /dev/null
+++ b/include/linux/byteorder/little_endian.h
@@ -0,0 +1,106 @@
+#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/byteorder/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do {} while (0)
+#define __le64_to_cpus(x) do {} while (0)
+#define __cpu_to_le32s(x) do {} while (0)
+#define __le32_to_cpus(x) do {} while (0)
+#define __cpu_to_le16s(x) do {} while (0)
+#define __le16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+#include <linux/byteorder/generic.h>
+
+#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/byteorder/pdp_endian.h b/include/linux/byteorder/pdp_endian.h
new file mode 100644
index 000000000000..618631cbc6e3
--- /dev/null
+++ b/include/linux/byteorder/pdp_endian.h
@@ -0,0 +1,88 @@
+#ifndef _LINUX_BYTEORDER_PDP_ENDIAN_H
+#define _LINUX_BYTEORDER_PDP_ENDIAN_H
+
+/*
+ * Could have been named NUXI-endian, but we use the same name as in glibc.
+ * hopefully only the PDP and its evolutions (old VAXen in compatibility mode)
+ * should ever use this braindead byteorder.
+ * This file *should* work, but has not been tested.
+ *
+ * little-endian is 1234; big-endian is 4321; nuxi/pdp-endian is 3412
+ *
+ * I thought vaxen were NUXI-endian, but was told they were correct-endian
+ * (little-endian), though indeed there existed NUXI-endian machines
+ * (DEC PDP-11 and old VAXen in compatibility mode).
+ * This makes this file a bit useless, but as a proof-of-concept.
+ *
+ * But what does a __u64 look like: is it 34127856 or 78563412 ???
+ * I don't dare imagine! Hence, no 64-bit byteorder support yet.
+ * Hopefully, there 64-bit pdp-endian support shouldn't ever be required.
+ *
+ */
+
+#ifndef __PDP_ENDIAN
+#define __PDP_ENDIAN 3412
+#endif
+#ifndef __PDP_ENDIAN_BITFIELD
+#define __PDP_ENDIAN_BITFIELD
+#endif
+
+#include <linux/byteorder/swab.h>
+#include <linux/byteorder/swabb.h>
+
+#define __constant_htonl(x) ___constant_swahb32((x))
+#define __constant_ntohl(x) ___constant_swahb32((x))
+#define __constant_htons(x) ___constant_swab16((x))
+#define __constant_ntohs(x) ___constant_swab16((x))
+#define __constant_cpu_to_le64(x) I DON'T KNOW
+#define __constant_le64_to_cpu(x) I DON'T KNOW
+#define __constant_cpu_to_le32(x) ___constant_swahw32((x))
+#define __constant_le32_to_cpu(x) ___constant_swahw32((x))
+#define __constant_cpu_to_le16(x) ((__u16)(x)
+#define __constant_le16_to_cpu(x) ((__u16)(x)
+#define __constant_cpu_to_be64(x) I DON'T KNOW
+#define __constant_be64_to_cpu(x) I DON'T KNOW
+#define __constant_cpu_to_be32(x) ___constant_swahb32((x))
+#define __constant_be32_to_cpu(x) ___constant_swahb32((x))
+#define __constant_cpu_to_be16(x) ___constant_swab16((x))
+#define __constant_be16_to_cpu(x) ___constant_swab16((x))
+#define __cpu_to_le64(x) I DON'T KNOW
+#define __le64_to_cpu(x) I DON'T KNOW
+#define __cpu_to_le32(x) ___swahw32((x))
+#define __le32_to_cpu(x) ___swahw32((x))
+#define __cpu_to_le16(x) ((__u16)(x)
+#define __le16_to_cpu(x) ((__u16)(x)
+#define __cpu_to_be64(x) I DON'T KNOW
+#define __be64_to_cpu(x) I DON'T KNOW
+#define __cpu_to_be32(x) __swahb32((x))
+#define __be32_to_cpu(x) __swahb32((x))
+#define __cpu_to_be16(x) __swab16((x))
+#define __be16_to_cpu(x) __swab16((x))
+#define __cpu_to_le64p(x) I DON'T KNOW
+#define __le64_to_cpup(x) I DON'T KNOW
+#define __cpu_to_le32p(x) ___swahw32p((x))
+#define __le32_to_cpup(x) ___swahw32p((x))
+#define __cpu_to_le16p(x) (*(__u16*)(x))
+#define __le16_to_cpup(x) (*(__u16*)(x))
+#define __cpu_to_be64p(x) I DON'T KNOW
+#define __be64_to_cpup(x) I DON'T KNOW
+#define __cpu_to_be32p(x) __swahb32p((x))
+#define __be32_to_cpup(x) __swahb32p((x))
+#define __cpu_to_be16p(x) __swab16p((x))
+#define __be16_to_cpup(x) __swab16p((x))
+#define __cpu_to_le64s(x) I DON'T KNOW
+#define __le64_to_cpus(x) I DON'T KNOW
+#define __cpu_to_le32s(x) ___swahw32s((x))
+#define __le32_to_cpus(x) ___swahw32s((x))
+#define __cpu_to_le16s(x) do {} while (0)
+#define __le16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) I DON'T KNOW
+#define __be64_to_cpus(x) I DON'T KNOW
+#define __cpu_to_be32s(x) __swahb32s((x))
+#define __be32_to_cpus(x) __swahb32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+#include <linux/byteorder/generic.h>
+
+#endif /* _LINUX_BYTEORDER_PDP_ENDIAN_H */
diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h
new file mode 100644
index 000000000000..2f1cb775125a
--- /dev/null
+++ b/include/linux/byteorder/swab.h
@@ -0,0 +1,192 @@
+#ifndef _LINUX_BYTEORDER_SWAB_H
+#define _LINUX_BYTEORDER_SWAB_H
+
+/*
+ * linux/byteorder/swab.h
+ * Byte-swapping, independently from CPU endianness
+ *	swabXX[ps]?(foo)
+ *
+ * Francois-Rene Rideau <fare@tunes.org> 19971205
+ *    separated swab functions from cpu_to_XX,
+ *    to clean up support for bizarre-endian architectures.
+ *
+ * See asm-i386/byteorder.h and suches for examples of how to provide
+ * architecture-dependent optimized versions
+ *
+ */
+
+#include <linux/compiler.h>
+
+/* casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___swab16(x) \
+({ \
+	__u16 __x = (x); \
+	((__u16)( \
+		(((__u16)(__x) & (__u16)0x00ffU) << 8) | \
+		(((__u16)(__x) & (__u16)0xff00U) >> 8) )); \
+})
+
+#define ___swab32(x) \
+({ \
+	__u32 __x = (x); \
+	((__u32)( \
+		(((__u32)(__x) & (__u32)0x000000ffUL) << 24) | \
+		(((__u32)(__x) & (__u32)0x0000ff00UL) <<  8) | \
+		(((__u32)(__x) & (__u32)0x00ff0000UL) >>  8) | \
+		(((__u32)(__x) & (__u32)0xff000000UL) >> 24) )); \
+})
+
+#define ___swab64(x) \
+({ \
+	__u64 __x = (x); \
+	((__u64)( \
+		(__u64)(((__u64)(__x) & (__u64)0x00000000000000ffULL) << 56) | \
+		(__u64)(((__u64)(__x) & (__u64)0x000000000000ff00ULL) << 40) | \
+		(__u64)(((__u64)(__x) & (__u64)0x0000000000ff0000ULL) << 24) | \
+		(__u64)(((__u64)(__x) & (__u64)0x00000000ff000000ULL) <<  8) | \
+	        (__u64)(((__u64)(__x) & (__u64)0x000000ff00000000ULL) >>  8) | \
+		(__u64)(((__u64)(__x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
+		(__u64)(((__u64)(__x) & (__u64)0x00ff000000000000ULL) >> 40) | \
+		(__u64)(((__u64)(__x) & (__u64)0xff00000000000000ULL) >> 56) )); \
+})
+
+#define ___constant_swab16(x) \
+	((__u16)( \
+		(((__u16)(x) & (__u16)0x00ffU) << 8) | \
+		(((__u16)(x) & (__u16)0xff00U) >> 8) ))
+#define ___constant_swab32(x) \
+	((__u32)( \
+		(((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
+		(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) | \
+		(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) | \
+		(((__u32)(x) & (__u32)0xff000000UL) >> 24) ))
+#define ___constant_swab64(x) \
+	((__u64)( \
+		(__u64)(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \
+		(__u64)(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \
+		(__u64)(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \
+		(__u64)(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) | \
+	        (__u64)(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) | \
+		(__u64)(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
+		(__u64)(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \
+		(__u64)(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56) ))
+
+/*
+ * provide defaults when no architecture-specific optimization is detected
+ */
+#ifndef __arch__swab16
+#  define __arch__swab16(x) ({ __u16 __tmp = (x) ; ___swab16(__tmp); })
+#endif
+#ifndef __arch__swab32
+#  define __arch__swab32(x) ({ __u32 __tmp = (x) ; ___swab32(__tmp); })
+#endif
+#ifndef __arch__swab64
+#  define __arch__swab64(x) ({ __u64 __tmp = (x) ; ___swab64(__tmp); })
+#endif
+
+#ifndef __arch__swab16p
+#  define __arch__swab16p(x) __arch__swab16(*(x))
+#endif
+#ifndef __arch__swab32p
+#  define __arch__swab32p(x) __arch__swab32(*(x))
+#endif
+#ifndef __arch__swab64p
+#  define __arch__swab64p(x) __arch__swab64(*(x))
+#endif
+
+#ifndef __arch__swab16s
+#  define __arch__swab16s(x) do { *(x) = __arch__swab16p((x)); } while (0)
+#endif
+#ifndef __arch__swab32s
+#  define __arch__swab32s(x) do { *(x) = __arch__swab32p((x)); } while (0)
+#endif
+#ifndef __arch__swab64s
+#  define __arch__swab64s(x) do { *(x) = __arch__swab64p((x)); } while (0)
+#endif
+
+
+/*
+ * Allow constant folding
+ */
+#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__)
+#  define __swab16(x) \
+(__builtin_constant_p((__u16)(x)) ? \
+ ___swab16((x)) : \
+ __fswab16((x)))
+#  define __swab32(x) \
+(__builtin_constant_p((__u32)(x)) ? \
+ ___swab32((x)) : \
+ __fswab32((x)))
+#  define __swab64(x) \
+(__builtin_constant_p((__u64)(x)) ? \
+ ___swab64((x)) : \
+ __fswab64((x)))
+#else
+#  define __swab16(x) __fswab16(x)
+#  define __swab32(x) __fswab32(x)
+#  define __swab64(x) __fswab64(x)
+#endif /* OPTIMIZE */
+
+
+static __inline__ __attribute_const__ __u16 __fswab16(__u16 x)
+{
+	return __arch__swab16(x);
+}
+static __inline__ __u16 __swab16p(const __u16 *x)
+{
+	return __arch__swab16p(x);
+}
+static __inline__ void __swab16s(__u16 *addr)
+{
+	__arch__swab16s(addr);
+}
+
+static __inline__ __attribute_const__ __u32 __fswab32(__u32 x)
+{
+	return __arch__swab32(x);
+}
+static __inline__ __u32 __swab32p(const __u32 *x)
+{
+	return __arch__swab32p(x);
+}
+static __inline__ void __swab32s(__u32 *addr)
+{
+	__arch__swab32s(addr);
+}
+
+#ifdef __BYTEORDER_HAS_U64__
+static __inline__ __attribute_const__ __u64 __fswab64(__u64 x)
+{
+#  ifdef __SWAB_64_THRU_32__
+	__u32 h = x >> 32;
+        __u32 l = x & ((1ULL<<32)-1);
+        return (((__u64)__swab32(l)) << 32) | ((__u64)(__swab32(h)));
+#  else
+	return __arch__swab64(x);
+#  endif
+}
+static __inline__ __u64 __swab64p(const __u64 *x)
+{
+	return __arch__swab64p(x);
+}
+static __inline__ void __swab64s(__u64 *addr)
+{
+	__arch__swab64s(addr);
+}
+#endif /* __BYTEORDER_HAS_U64__ */
+
+#if defined(__KERNEL__)
+#define swab16 __swab16
+#define swab32 __swab32
+#define swab64 __swab64
+#define swab16p __swab16p
+#define swab32p __swab32p
+#define swab64p __swab64p
+#define swab16s __swab16s
+#define swab32s __swab32s
+#define swab64s __swab64s
+#endif
+
+#endif /* _LINUX_BYTEORDER_SWAB_H */
diff --git a/include/linux/byteorder/swabb.h b/include/linux/byteorder/swabb.h
new file mode 100644
index 000000000000..d28d9a804d3b
--- /dev/null
+++ b/include/linux/byteorder/swabb.h
@@ -0,0 +1,137 @@
+#ifndef _LINUX_BYTEORDER_SWABB_H
+#define _LINUX_BYTEORDER_SWABB_H
+
+/*
+ * linux/byteorder/swabb.h
+ * SWAp Bytes Bizarrely
+ *	swaHHXX[ps]?(foo)
+ *
+ * Support for obNUXIous pdp-endian and other bizarre architectures.
+ * Will Linux ever run on such ancient beasts? if not, this file
+ * will be but a programming pearl. Still, it's a reminder that we
+ * shouldn't be making too many assumptions when trying to be portable.
+ *
+ */
+
+/*
+ * Meaning of the names I chose (vaxlinux people feel free to correct them):
+ * swahw32	swap 16-bit half-words in a 32-bit word
+ * swahb32	swap 8-bit halves of each 16-bit half-word in a 32-bit word
+ *
+ * No 64-bit support yet. I don't know NUXI conventions for long longs.
+ * I guarantee it will be a mess when it's there, though :->
+ * It will be even worse if there are conflicting 64-bit conventions.
+ * Hopefully, no one ever used 64-bit objects on NUXI machines.
+ *
+ */
+
+#define ___swahw32(x) \
+({ \
+	__u32 __x = (x); \
+	((__u32)( \
+		(((__u32)(__x) & (__u32)0x0000ffffUL) << 16) | \
+		(((__u32)(__x) & (__u32)0xffff0000UL) >> 16) )); \
+})
+#define ___swahb32(x) \
+({ \
+	__u32 __x = (x); \
+	((__u32)( \
+		(((__u32)(__x) & (__u32)0x00ff00ffUL) << 8) | \
+		(((__u32)(__x) & (__u32)0xff00ff00UL) >> 8) )); \
+})
+
+#define ___constant_swahw32(x) \
+	((__u32)( \
+		(((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \
+		(((__u32)(x) & (__u32)0xffff0000UL) >> 16) ))
+#define ___constant_swahb32(x) \
+	((__u32)( \
+		(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \
+		(((__u32)(x) & (__u32)0xff00ff00UL) >> 8) ))
+
+/*
+ * provide defaults when no architecture-specific optimization is detected
+ */
+#ifndef __arch__swahw32
+#  define __arch__swahw32(x) ___swahw32(x)
+#endif
+#ifndef __arch__swahb32
+#  define __arch__swahb32(x) ___swahb32(x)
+#endif
+
+#ifndef __arch__swahw32p
+#  define __arch__swahw32p(x) __swahw32(*(x))
+#endif
+#ifndef __arch__swahb32p
+#  define __arch__swahb32p(x) __swahb32(*(x))
+#endif
+
+#ifndef __arch__swahw32s
+#  define __arch__swahw32s(x) do { *(x) = __swahw32p((x)); } while (0)
+#endif
+#ifndef __arch__swahb32s
+#  define __arch__swahb32s(x) do { *(x) = __swahb32p((x)); } while (0)
+#endif
+
+
+/*
+ * Allow constant folding
+ */
+#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__)
+#  define __swahw32(x) \
+(__builtin_constant_p((__u32)(x)) ? \
+ ___swahw32((x)) : \
+ __fswahw32((x)))
+#  define __swahb32(x) \
+(__builtin_constant_p((__u32)(x)) ? \
+ ___swahb32((x)) : \
+ __fswahb32((x)))
+#else
+#  define __swahw32(x) __fswahw32(x)
+#  define __swahb32(x) __fswahb32(x)
+#endif /* OPTIMIZE */
+
+
+static __inline__ __const__ __u32 __fswahw32(__u32 x)
+{
+	return __arch__swahw32(x);
+}
+static __inline__ __u32 __swahw32p(__u32 *x)
+{
+	return __arch__swahw32p(x);
+}
+static __inline__ void __swahw32s(__u32 *addr)
+{
+	__arch__swahw32s(addr);
+}
+
+
+static __inline__ __const__ __u32 __fswahb32(__u32 x)
+{
+	return __arch__swahb32(x);
+}
+static __inline__ __u32 __swahb32p(__u32 *x)
+{
+	return __arch__swahb32p(x);
+}
+static __inline__ void __swahb32s(__u32 *addr)
+{
+	__arch__swahb32s(addr);
+}
+
+#ifdef __BYTEORDER_HAS_U64__
+/*
+ * Not supported yet
+ */
+#endif /* __BYTEORDER_HAS_U64__ */
+
+#if defined(__KERNEL__)
+#define swahw32 __swahw32
+#define swahb32 __swahb32
+#define swahw32p __swahw32p
+#define swahb32p __swahb32p
+#define swahw32s __swahw32s
+#define swahb32s __swahb32s
+#endif
+
+#endif /* _LINUX_BYTEORDER_SWABB_H */
diff --git a/include/linux/cache.h b/include/linux/cache.h
new file mode 100644
index 000000000000..4d767b93738a
--- /dev/null
+++ b/include/linux/cache.h
@@ -0,0 +1,51 @@
+#ifndef __LINUX_CACHE_H
+#define __LINUX_CACHE_H
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <asm/cache.h>
+
+#ifndef L1_CACHE_ALIGN
+#define L1_CACHE_ALIGN(x) ALIGN(x, L1_CACHE_BYTES)
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#ifndef ____cacheline_aligned
+#define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
+#endif
+
+#ifndef ____cacheline_aligned_in_smp
+#ifdef CONFIG_SMP
+#define ____cacheline_aligned_in_smp ____cacheline_aligned
+#else
+#define ____cacheline_aligned_in_smp
+#endif /* CONFIG_SMP */
+#endif
+
+#ifndef __cacheline_aligned
+#define __cacheline_aligned					\
+  __attribute__((__aligned__(SMP_CACHE_BYTES),			\
+		 __section__(".data.cacheline_aligned")))
+#endif /* __cacheline_aligned */
+
+#ifndef __cacheline_aligned_in_smp
+#ifdef CONFIG_SMP
+#define __cacheline_aligned_in_smp __cacheline_aligned
+#else
+#define __cacheline_aligned_in_smp
+#endif /* CONFIG_SMP */
+#endif
+
+#if !defined(____cacheline_maxaligned_in_smp)
+#if defined(CONFIG_SMP)
+#define ____cacheline_maxaligned_in_smp \
+	__attribute__((__aligned__(1 << (L1_CACHE_SHIFT_MAX))))
+#else
+#define ____cacheline_maxaligned_in_smp
+#endif
+#endif
+
+#endif /* __LINUX_CACHE_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
new file mode 100644
index 000000000000..8d139f4acf23
--- /dev/null
+++ b/include/linux/capability.h
@@ -0,0 +1,360 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@transmeta.com>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://linux.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.2/
+ */ 
+
+#ifndef _LINUX_CAPABILITY_H
+#define _LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* User-level do most of the mapping between kernel and user
+   capabilities based on the version tag given by the kernel. The
+   kernel might be somewhat backwards compatible, but don't bet on
+   it. */
+
+/* XXX - Note, cap_t, is defined by POSIX to be an "opaque" pointer to
+   a set of three capability sets.  The transposition of 3*the
+   following structure to such a composite is better handled in a user
+   library since the draft standard requires the use of malloc/free
+   etc.. */
+ 
+#define _LINUX_CAPABILITY_VERSION  0x19980330
+
+typedef struct __user_cap_header_struct {
+	__u32 version;
+	int pid;
+} __user *cap_user_header_t;
+ 
+typedef struct __user_cap_data_struct {
+        __u32 effective;
+        __u32 permitted;
+        __u32 inheritable;
+} __user *cap_user_data_t;
+  
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+/* #define STRICT_CAP_T_TYPECHECKS */
+
+#ifdef STRICT_CAP_T_TYPECHECKS
+
+typedef struct kernel_cap_struct {
+	__u32 cap;
+} kernel_cap_t;
+
+#else
+
+typedef __u32 kernel_cap_t;
+
+#endif
+  
+#define _USER_CAP_HEADER_SIZE  (2*sizeof(__u32))
+#define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities. 
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+   overrides the restriction of changing file ownership and group
+   ownership. */
+
+#define CAP_CHOWN            0
+
+/* Override all DAC access, including ACL execute access if
+   [_POSIX_ACL] is defined. Excluding DAC access covered by
+   CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE     1
+
+/* Overrides all DAC restrictions regarding read and search on files
+   and directories, including ACL restrictions if [_POSIX_ACL] is
+   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH  2
+    
+/* Overrides all restrictions about allowed operations on files, where
+   file owner ID must be equal to the user ID, except where CAP_FSETID
+   is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER           3
+
+/* Overrides the following restrictions that the effective user ID
+   shall match the file owner ID when setting the S_ISUID and S_ISGID
+   bits on that file; that the effective group ID (or one of the
+   supplementary group IDs) shall match the file owner ID when setting
+   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+   cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID           4
+
+/* Used to decide between falling back on the old suser() or fsuser(). */
+
+#define CAP_FS_MASK          0x1f
+
+/* Overrides the restriction that the real or effective user ID of a
+   process sending a signal must match the real or effective user ID
+   of the process receiving the signal. */
+
+#define CAP_KILL             5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID           6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID           7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Transfer any capability in your permitted set to any pid,
+   remove any capability in your permitted set from any pid */
+
+#define CAP_SETPCAP          8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE  9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST    11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+   sockets */
+/* Allow binding to any address for transparent proxying */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN        12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+
+#define CAP_NET_RAW          13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+   with IPC) */
+
+#define CAP_IPC_LOCK         14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER        15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+/* Modify cap_bset */
+#define CAP_SYS_MODULE       16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO        17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT       18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE       19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT        20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow configuring the kernel's syslog (printk behaviour) */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+   and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+   extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+   arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+
+#define CAP_SYS_ADMIN        21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT         22
+
+/* Allow raising priority and setting priority on other (different
+   UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+   processes and setting the scheduling algorithm used by another
+   process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE         23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+   resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so 
+   you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE     24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME         25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG   26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD            27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE            28
+
+#define CAP_AUDIT_WRITE      29
+
+#define CAP_AUDIT_CONTROL    30
+
+#ifdef __KERNEL__
+/* 
+ * Bounding set
+ */
+extern kernel_cap_t cap_bset;
+
+/*
+ * Internal kernel functions only
+ */
+ 
+#ifdef STRICT_CAP_T_TYPECHECKS
+
+#define to_cap_t(x) { x }
+#define cap_t(x) (x).cap
+
+#else
+
+#define to_cap_t(x) (x)
+#define cap_t(x) (x)
+
+#endif
+
+#define CAP_EMPTY_SET       to_cap_t(0)
+#define CAP_FULL_SET        to_cap_t(~0)
+#define CAP_INIT_EFF_SET    to_cap_t(~0 & ~CAP_TO_MASK(CAP_SETPCAP))
+#define CAP_INIT_INH_SET    to_cap_t(0)
+
+#define CAP_TO_MASK(x) (1 << (x))
+#define cap_raise(c, flag)   (cap_t(c) |=  CAP_TO_MASK(flag))
+#define cap_lower(c, flag)   (cap_t(c) &= ~CAP_TO_MASK(flag))
+#define cap_raised(c, flag)  (cap_t(c) & CAP_TO_MASK(flag))
+
+static inline kernel_cap_t cap_combine(kernel_cap_t a, kernel_cap_t b)
+{
+     kernel_cap_t dest;
+     cap_t(dest) = cap_t(a) | cap_t(b);
+     return dest;
+}
+
+static inline kernel_cap_t cap_intersect(kernel_cap_t a, kernel_cap_t b)
+{
+     kernel_cap_t dest;
+     cap_t(dest) = cap_t(a) & cap_t(b);
+     return dest;
+}
+
+static inline kernel_cap_t cap_drop(kernel_cap_t a, kernel_cap_t drop)
+{
+     kernel_cap_t dest;
+     cap_t(dest) = cap_t(a) & ~cap_t(drop);
+     return dest;
+}
+
+static inline kernel_cap_t cap_invert(kernel_cap_t c)
+{
+     kernel_cap_t dest;
+     cap_t(dest) = ~cap_t(c);
+     return dest;
+}
+
+#define cap_isclear(c)       (!cap_t(c))
+#define cap_issubset(a,set)  (!(cap_t(a) & ~cap_t(set)))
+
+#define cap_clear(c)         do { cap_t(c) =  0; } while(0)
+#define cap_set_full(c)      do { cap_t(c) = ~0; } while(0)
+#define cap_mask(c,mask)     do { cap_t(c) &= cap_t(mask); } while(0)
+
+#define cap_is_fs_cap(c)     (CAP_TO_MASK(c) & CAP_FS_MASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/linux/capi.h
new file mode 100644
index 000000000000..fdebaaa9f66e
--- /dev/null
+++ b/include/linux/capi.h
@@ -0,0 +1,133 @@
+/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ * 
+ * CAPI 2.0 Interface for Linux
+ * 
+ * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __LINUX_CAPI_H__
+#define __LINUX_CAPI_H__
+
+#include <asm/types.h>
+#include <linux/ioctl.h>
+#ifndef __KERNEL__
+#include <linux/kernelcapi.h>
+#endif
+
+/*
+ * CAPI_REGISTER
+ */
+
+typedef struct capi_register_params {	/* CAPI_REGISTER */
+	__u32 level3cnt;	/* No. of simulatneous user data connections */
+	__u32 datablkcnt;	/* No. of buffered data messages */
+	__u32 datablklen;	/* Size of buffered data messages */
+} capi_register_params;
+
+#define	CAPI_REGISTER	_IOW('C',0x01,struct capi_register_params)
+
+/*
+ * CAPI_GET_MANUFACTURER
+ */
+
+#define CAPI_MANUFACTURER_LEN		64
+
+#define	CAPI_GET_MANUFACTURER	_IOWR('C',0x06,int)	/* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
+
+/*
+ * CAPI_GET_VERSION
+ */
+
+typedef struct capi_version {
+	__u32 majorversion;
+	__u32 minorversion;
+	__u32 majormanuversion;
+	__u32 minormanuversion;
+} capi_version;
+
+#define CAPI_GET_VERSION	_IOWR('C',0x07,struct capi_version)
+
+/*
+ * CAPI_GET_SERIAL
+ */
+
+#define CAPI_SERIAL_LEN		8
+#define CAPI_GET_SERIAL		_IOWR('C',0x08,int)	/* broken: wanted size 8 (CAPI_SERIAL_LEN) */
+
+/*
+ * CAPI_GET_PROFILE
+ */
+
+typedef struct capi_profile {
+	__u16 ncontroller;	/* number of installed controller */
+	__u16 nbchannel;	/* number of B-Channels */
+	__u32 goptions;		/* global options */
+	__u32 support1;		/* B1 protocols support */
+	__u32 support2;		/* B2 protocols support */
+	__u32 support3;		/* B3 protocols support */
+	__u32 reserved[6];	/* reserved */
+	__u32 manu[5];		/* manufacturer specific information */
+} capi_profile;
+
+#define CAPI_GET_PROFILE	_IOWR('C',0x09,struct capi_profile)
+
+typedef struct capi_manufacturer_cmd {
+	unsigned long cmd;
+	void __user *data;
+} capi_manufacturer_cmd;
+
+/*
+ * CAPI_MANUFACTURER_CMD
+ */
+
+#define CAPI_MANUFACTURER_CMD	_IOWR('C',0x20, struct capi_manufacturer_cmd)
+
+/*
+ * CAPI_GET_ERRCODE
+ * capi errcode is set, * if read, write, or ioctl returns EIO,
+ * ioctl returns errcode directly, and in arg, if != 0
+ */
+
+#define CAPI_GET_ERRCODE	_IOR('C',0x21, __u16)
+
+/*
+ * CAPI_INSTALLED
+ */
+#define CAPI_INSTALLED		_IOR('C',0x22, __u16)
+
+
+/*
+ * member contr is input for
+ * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
+ * and CAPI_GET_PROFILE
+ */
+typedef union capi_ioctl_struct {
+	__u32 contr;
+	capi_register_params rparams;
+	__u8 manufacturer[CAPI_MANUFACTURER_LEN];
+	capi_version version;
+	__u8 serial[CAPI_SERIAL_LEN];
+	capi_profile profile;
+	capi_manufacturer_cmd cmd;
+	__u16 errcode;
+} capi_ioctl_struct;
+
+/*
+ * Middleware extension
+ */
+
+#define CAPIFLAG_HIGHJACKING	0x0001
+
+#define CAPI_GET_FLAGS		_IOR('C',0x23, unsigned)
+#define CAPI_SET_FLAGS		_IOR('C',0x24, unsigned)
+#define CAPI_CLR_FLAGS		_IOR('C',0x25, unsigned)
+
+#define CAPI_NCCI_OPENCOUNT	_IOR('C',0x26, unsigned)
+
+#define CAPI_NCCI_GETUNIT	_IOR('C',0x27, unsigned)
+
+#endif				/* __LINUX_CAPI_H__ */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
new file mode 100644
index 000000000000..ee0c6e8995da
--- /dev/null
+++ b/include/linux/cciss_ioctl.h
@@ -0,0 +1,240 @@
+#ifndef CCISS_IOCTLH
+#define CCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	__u32 		board_id;
+} cciss_pci_info_struct; 
+
+typedef struct _cciss_coalint_struct
+{
+	__u32  delay;
+	__u32  count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 	0x0001
+#define CISS_PARCSCIU3 	0x0002
+#define CISS_FIBRE1G	0x0100
+#define CISS_FIBRE2G	0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+#ifndef CCISS_CMD_H
+// This defines are duplicated in cciss_cmd.h in the driver directory 
+
+//general boundary defintions
+#define SENSEINFOBYTES          32//note that this value may vary between host implementations
+
+//Command Status value
+#define CMD_SUCCESS             0x0000
+#define CMD_TARGET_STATUS       0x0001
+#define CMD_DATA_UNDERRUN       0x0002
+#define CMD_DATA_OVERRUN        0x0003
+#define CMD_INVALID             0x0004
+#define CMD_PROTOCOL_ERR        0x0005
+#define CMD_HARDWARE_ERR        0x0006
+#define CMD_CONNECTION_LOST     0x0007
+#define CMD_ABORTED             0x0008
+#define CMD_ABORT_FAILED        0x0009
+#define CMD_UNSOLICITED_ABORT   0x000A
+#define CMD_TIMEOUT             0x000B
+#define CMD_UNABORTABLE		0x000C
+
+//transfer direction
+#define XFER_NONE               0x00
+#define XFER_WRITE              0x01
+#define XFER_READ               0x02
+#define XFER_RSVD               0x03
+
+//task attribute
+#define ATTR_UNTAGGED           0x00
+#define ATTR_SIMPLE             0x04
+#define ATTR_HEADOFQUEUE        0x05
+#define ATTR_ORDERED            0x06
+#define ATTR_ACA                0x07
+
+//cdb type
+#define TYPE_CMD				0x00
+#define TYPE_MSG				0x01
+
+// Type defs used in the following structs
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN	16	
+
+#define LEVEL2LUN   1   // index into Target(x) structure, due to byte swapping
+#define LEVEL3LUN   0
+
+#pragma pack(1)
+
+//Command List Structure
+typedef union _SCSI3Addr_struct {
+   struct {
+    BYTE Dev;
+    BYTE Bus:6;
+    BYTE Mode:2;        // b00
+  } PeripDev;
+   struct {
+    BYTE DevLSB;
+    BYTE DevMSB:6;
+    BYTE Mode:2;        // b01
+  } LogDev;
+   struct {
+    BYTE Dev:5;
+    BYTE Bus:3;
+    BYTE Targ:6;
+    BYTE Mode:2;        // b10
+  } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+  DWORD             TargetId:24;
+  DWORD             Bus:6;
+  DWORD             Mode:2;
+  SCSI3Addr_struct  Target[2]; //2 level target device addr
+} PhysDevAddr_struct;
+  
+typedef struct _LogDevAddr_struct {
+  DWORD            VolId:30;
+  DWORD            Mode:2;
+  BYTE             reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+  BYTE               LunAddrBytes[8];
+  SCSI3Addr_struct   SCSI3Lun[4];
+  PhysDevAddr_struct PhysDev;
+  LogDevAddr_struct  LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+  BYTE   CDBLen;
+  struct {
+    BYTE Type:3;
+    BYTE Attribute:3;
+    BYTE Direction:2;
+  } Type;
+  HWORD  Timeout;
+  BYTE   CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+  struct {
+    BYTE  Reserved[3];
+    BYTE  Type;
+    DWORD ErrorInfo;
+  }Common_Info;
+  struct{
+    BYTE  Reserved[2];
+    BYTE  offense_size;//size of offending entry
+    BYTE  offense_num; //byte # of offense 0-base
+    DWORD offense_value;
+  }Invalid_Cmd;
+}MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+  BYTE               ScsiStatus;
+  BYTE               SenseLen;
+  HWORD              CommandStatus;
+  DWORD              ResidualCnt;
+  MoreErrInfo_struct MoreErrInfo;
+  BYTE               SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+#endif /* CCISS_CMD_H */ 
+
+typedef struct _IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info; 
+  WORD			   buf_size;  /* size in bytes of the buf */
+  BYTE			   __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  BYTE			   __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+	__u32	LunID;
+	int	num_opens;  /* number of opens on the logical volume */
+	int	num_parts;  /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */ 
+#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+/* 32 bit compatible ioctl structs */
+typedef struct _IOCTL32_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  WORD			   buf_size;  /* size in bytes of the buf */
+  __u32			   buf; /* 32 bit pointer to data buffer */
+} IOCTL32_Command_struct;
+
+typedef struct _BIG_IOCTL32_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  __u32 		buf;	/* 32 bit pointer to data buffer */
+} BIG_IOCTL32_Command_struct;
+
+#define CCISS_PASSTHRU32   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL32_Command_struct)
+#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
+
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+#endif  
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
new file mode 100644
index 000000000000..1dc3ab0523fd
--- /dev/null
+++ b/include/linux/cd1400.h
@@ -0,0 +1,292 @@
+/*****************************************************************************/
+
+/*
+ *	cd1400.h  -- cd1400 UART hardware info.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_CD1400_H
+#define	_CD1400_H
+/*****************************************************************************/
+
+/*
+ *	Define the number of async ports per cd1400 uart chip.
+ */
+#define	CD1400_PORTS		4
+
+/*
+ *	Define the cd1400 uarts internal FIFO sizes.
+ */
+#define	CD1400_TXFIFOSIZE	12
+#define	CD1400_RXFIFOSIZE	12
+
+/*
+ *	Local RX FIFO thresh hold level. Also define the RTS thresh hold
+ *	based on the RX thresh hold.
+ */
+#define	FIFO_RXTHRESHOLD	6
+#define	FIFO_RTSTHRESHOLD	7
+
+/*****************************************************************************/
+
+/*
+ *	Define the cd1400 register addresses. These are all the valid
+ *	registers with the cd1400. Some are global, some virtual, some
+ *	per port.
+ */
+#define	GFRCR		0x40
+#define	CAR		0x68
+#define	GCR		0x4b
+#define	SVRR		0x67
+#define	RICR		0x44
+#define	TICR		0x45
+#define	MICR		0x46
+#define	RIR		0x6b
+#define	TIR		0x6a
+#define	MIR		0x69
+#define	PPR		0x7e
+
+#define	RIVR		0x43
+#define	TIVR		0x42
+#define	MIVR		0x41
+#define	TDR		0x63
+#define	RDSR		0x62
+#define	MISR		0x4c
+#define	EOSRR		0x60
+
+#define	LIVR		0x18
+#define	CCR		0x05
+#define	SRER		0x06
+#define	COR1		0x08
+#define	COR2		0x09
+#define	COR3		0x0a
+#define	COR4		0x1e
+#define	COR5		0x1f
+#define	CCSR		0x0b
+#define	RDCR		0x0e
+#define	SCHR1		0x1a
+#define	SCHR2		0x1b
+#define	SCHR3		0x1c
+#define	SCHR4		0x1d
+#define	SCRL		0x22
+#define	SCRH		0x23
+#define	LNC		0x24
+#define	MCOR1		0x15
+#define	MCOR2		0x16
+#define	RTPR		0x21
+#define	MSVR1		0x6c
+#define	MSVR2		0x6d
+#define	PSVR		0x6f
+#define	RBPR		0x78
+#define	RCOR		0x7c
+#define	TBPR		0x72
+#define	TCOR		0x76
+
+/*****************************************************************************/
+
+/*
+ *	Define the set of baud rate clock divisors.
+ */
+#define	CD1400_CLK0	8
+#define	CD1400_CLK1	32
+#define	CD1400_CLK2	128
+#define	CD1400_CLK3	512
+#define	CD1400_CLK4	2048
+
+#define	CD1400_NUMCLKS	5
+
+/*****************************************************************************/
+
+/*
+ *	Define the clock pre-scalar value to be a 5 ms clock. This should be
+ *	OK for now. It would probably be better to make it 10 ms, but we
+ *	can't fit that divisor into 8 bits!
+ */
+#define	PPR_SCALAR	244
+
+/*****************************************************************************/
+
+/*
+ *	Define values used to set character size options.
+ */
+#define	COR1_CHL5	0x00
+#define	COR1_CHL6	0x01
+#define	COR1_CHL7	0x02
+#define	COR1_CHL8	0x03
+
+/*
+ *	Define values used to set the number of stop bits.
+ */
+#define	COR1_STOP1	0x00
+#define	COR1_STOP15	0x04
+#define	COR1_STOP2	0x08
+
+/*
+ *	Define values used to set the parity scheme in use.
+ */
+#define	COR1_PARNONE	0x00
+#define	COR1_PARFORCE	0x20
+#define	COR1_PARENB	0x40
+#define	COR1_PARIGNORE	0x10
+
+#define	COR1_PARODD	0x80
+#define	COR1_PAREVEN	0x00
+
+#define	COR2_IXM	0x80
+#define	COR2_TXIBE	0x40
+#define	COR2_ETC	0x20
+#define	COR2_LLM	0x10
+#define	COR2_RLM	0x08
+#define	COR2_RTSAO	0x04
+#define	COR2_CTSAE	0x02
+
+#define	COR3_SCDRNG	0x80
+#define	COR3_SCD34	0x40
+#define	COR3_FCT	0x20
+#define	COR3_SCD12	0x10
+
+/*
+ *	Define values used by COR4.
+ */
+#define	COR4_BRKINT	0x08
+#define	COR4_IGNBRK	0x18
+
+/*****************************************************************************/
+
+/*
+ *	Define the modem control register values.
+ *	Note that the actual hardware is a little different to the conventional
+ *	pin names on the cd1400.
+ */
+#define	MSVR1_DTR	0x01
+#define	MSVR1_DSR	0x10
+#define	MSVR1_RI	0x20
+#define	MSVR1_CTS	0x40
+#define	MSVR1_DCD	0x80
+
+#define	MSVR2_RTS	0x02
+#define	MSVR2_DSR	0x10
+#define	MSVR2_RI	0x20
+#define	MSVR2_CTS	0x40
+#define	MSVR2_DCD	0x80
+
+#define	MCOR1_DCD	0x80
+#define	MCOR1_CTS	0x40
+#define	MCOR1_RI	0x20
+#define	MCOR1_DSR	0x10
+
+#define	MCOR2_DCD	0x80
+#define	MCOR2_CTS	0x40
+#define	MCOR2_RI	0x20
+#define	MCOR2_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Define the bits used with the service (interrupt) enable register.
+ */
+#define	SRER_NNDT	0x01
+#define	SRER_TXEMPTY	0x02
+#define	SRER_TXDATA	0x04
+#define	SRER_RXDATA	0x10
+#define	SRER_MODEM	0x80
+
+/*****************************************************************************/
+
+/*
+ *	Define operational commands for the command register.
+ */
+#define	CCR_RESET	0x80
+#define	CCR_CORCHANGE	0x4e
+#define	CCR_SENDCH	0x20
+#define	CCR_CHANCTRL	0x10
+
+#define	CCR_TXENABLE	(CCR_CHANCTRL | 0x08)
+#define	CCR_TXDISABLE	(CCR_CHANCTRL | 0x04)
+#define	CCR_RXENABLE	(CCR_CHANCTRL | 0x02)
+#define	CCR_RXDISABLE	(CCR_CHANCTRL | 0x01)
+
+#define	CCR_SENDSCHR1	(CCR_SENDCH | 0x01)
+#define	CCR_SENDSCHR2	(CCR_SENDCH | 0x02)
+#define	CCR_SENDSCHR3	(CCR_SENDCH | 0x03)
+#define	CCR_SENDSCHR4	(CCR_SENDCH | 0x04)
+
+#define	CCR_RESETCHAN	(CCR_RESET | 0x00)
+#define	CCR_RESETFULL	(CCR_RESET | 0x01)
+#define	CCR_TXFLUSHFIFO	(CCR_RESET | 0x02)
+
+#define	CCR_MAXWAIT	10000
+
+/*****************************************************************************/
+
+/*
+ *	Define the valid acknowledgement types (for hw ack cycle).
+ */
+#define	ACK_TYPMASK	0x07
+#define	ACK_TYPTX	0x02
+#define	ACK_TYPMDM	0x01
+#define	ACK_TYPRXGOOD	0x03
+#define	ACK_TYPRXBAD	0x07
+
+#define	SVRR_RX		0x01
+#define	SVRR_TX		0x02
+#define	SVRR_MDM	0x04
+
+#define	ST_OVERRUN	0x01
+#define	ST_FRAMING	0x02
+#define	ST_PARITY	0x04
+#define	ST_BREAK	0x08
+#define	ST_SCHAR1	0x10
+#define	ST_SCHAR2	0x20
+#define	ST_SCHAR3	0x30
+#define	ST_SCHAR4	0x40
+#define	ST_RANGE	0x70
+#define	ST_SCHARMASK	0x70
+#define	ST_TIMEOUT	0x80
+
+#define	MISR_DCD	0x80
+#define	MISR_CTS	0x40
+#define	MISR_RI		0x20
+#define	MISR_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Defines for the CCSR status register.
+ */
+#define	CCSR_RXENABLED	0x80
+#define	CCSR_RXFLOWON	0x40
+#define	CCSR_RXFLOWOFF	0x20
+#define	CCSR_TXENABLED	0x08
+#define	CCSR_TXFLOWON	0x04
+#define	CCSR_TXFLOWOFF	0x02
+
+/*****************************************************************************/
+
+/*
+ *	Define the embedded commands.
+ */
+#define	ETC_CMD		0x00
+#define	ETC_STARTBREAK	0x81
+#define	ETC_DELAY	0x82
+#define	ETC_STOPBREAK	0x83
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
new file mode 100644
index 000000000000..8da37e29cb87
--- /dev/null
+++ b/include/linux/cdev.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_CDEV_H
+#define _LINUX_CDEV_H
+#ifdef __KERNEL__
+
+struct cdev {
+	struct kobject kobj;
+	struct module *owner;
+	struct file_operations *ops;
+	struct list_head list;
+	dev_t dev;
+	unsigned int count;
+};
+
+void cdev_init(struct cdev *, struct file_operations *);
+
+struct cdev *cdev_alloc(void);
+
+void cdev_put(struct cdev *p);
+
+int cdev_add(struct cdev *, dev_t, unsigned);
+
+void cdev_del(struct cdev *);
+
+void cd_forget(struct inode *);
+
+#endif
+#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
new file mode 100644
index 000000000000..0908daf7bf56
--- /dev/null
+++ b/include/linux/cdk.h
@@ -0,0 +1,486 @@
+/*****************************************************************************/
+
+/*
+ *	cdk.h  -- CDK interface definitions.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_CDK_H
+#define	_CDK_H
+/*****************************************************************************/
+
+#pragma	pack(2)
+
+/*
+ *	The following set of definitions is used to communicate with the
+ *	shared memory interface of the Stallion intelligent multiport serial
+ *	boards. The definitions in this file are taken directly from the
+ *	document titled "Generic Stackable Interface, Downloader and
+ *	Communications Development Kit".
+ */
+
+/*
+ *	Define the set of important shared memory addresses. These are
+ *	required to initialize the board and get things started. All of these
+ *	addresses are relative to the start of the shared memory.
+ */
+#define	CDK_SIGADDR	0x200
+#define	CDK_FEATADDR	0x280
+#define	CDK_CDKADDR	0x300
+#define	CDK_RDYADDR	0x262
+
+#define	CDK_ALIVEMARKER	13
+
+/*
+ *	On hardware power up the ROMs located on the EasyConnection 8/64 will
+ *	fill out the following signature information into shared memory. This
+ *	way the host system can quickly determine that the board is present
+ *	and is operational.
+ */
+typedef struct cdkecpsig {
+	unsigned long	magic;
+	unsigned short	romver;
+	unsigned short	cputype;
+	unsigned char	panelid[8];
+} cdkecpsig_t;
+
+#define	ECP_MAGIC	0x21504345
+
+/*
+ *	On hardware power up the ROMs located on the ONboard, Stallion and
+ *	Brumbys will fill out the following signature information into shared
+ *	memory. This way the host system can quickly determine that the board
+ *	is present and is operational.
+ */
+typedef struct cdkonbsig {
+	unsigned short	magic0;
+	unsigned short	magic1;
+	unsigned short	magic2;
+	unsigned short	magic3;
+	unsigned short	romver;
+	unsigned short	memoff;
+	unsigned short	memseg;
+	unsigned short	amask0;
+	unsigned short	pic;
+	unsigned short	status;
+	unsigned short	btype;
+	unsigned short	clkticks;
+	unsigned short	clkspeed;
+	unsigned short	amask1;
+	unsigned short	amask2;
+} cdkonbsig_t;
+
+#define	ONB_MAGIC0	0xf2a7
+#define	ONB_MAGIC1	0xa149
+#define	ONB_MAGIC2	0x6352
+#define	ONB_MAGIC3	0xf121
+
+/*
+ *	Define the feature area structure. The feature area is the set of
+ *	startup parameters used by the slave image when it starts executing.
+ *	They allow for the specification of buffer sizes, debug trace, etc.
+ */
+typedef struct cdkfeature {
+	unsigned long	debug;
+	unsigned long	banner;
+	unsigned long	etype;
+	unsigned long	nrdevs;
+	unsigned long	brdspec;
+	unsigned long	txrqsize;
+	unsigned long	rxrqsize;
+	unsigned long	flags;
+} cdkfeature_t;
+
+#define	ETYP_DDK	0
+#define	ETYP_CDK	1
+
+/*
+ *	Define the CDK header structure. This is the info that the slave
+ *	environment sets up after it has been downloaded and started. It
+ *	essentially provides a memory map for the shared memory interface.
+ */
+typedef struct cdkhdr {
+	unsigned short	command;
+	unsigned short	status;
+	unsigned short	port;
+	unsigned short	mode;
+	unsigned long	cmd_buf[14];
+	unsigned short	alive_cnt;
+	unsigned short	intrpt_mode;
+	unsigned char	intrpt_id[8];
+	unsigned char	ver_release;
+	unsigned char	ver_modification;
+	unsigned char	ver_fix;
+	unsigned char	deadman_restart;
+	unsigned short	deadman;
+	unsigned short	nrdevs;
+	unsigned long	memp;
+	unsigned long	hostp;
+	unsigned long	slavep;
+	unsigned char	hostreq;
+	unsigned char	slavereq;
+	unsigned char	cmd_reserved[30];
+} cdkhdr_t;
+
+#define	MODE_DDK	0
+#define	MODE_CDK	1
+
+#define	IMD_INTR	0x0
+#define	IMD_PPINTR	0x1
+#define	IMD_POLL	0xff
+
+/*
+ *	Define the memory mapping structure. This structure is pointed to by
+ *	the memp field in the stlcdkhdr struct. As many as these structures
+ *	as required are layed out in shared memory to define how the rest of
+ *	shared memory is divided up. There will be one for each port.
+ */
+typedef struct cdkmem {
+	unsigned short	dtype;
+	unsigned long	offset;
+} cdkmem_t;
+
+#define	TYP_UNDEFINED	0x0
+#define	TYP_ASYNCTRL	0x1
+#define	TYP_ASYNC	0x20
+#define	TYP_PARALLEL	0x40
+#define	TYP_SYNCX21	0x60
+
+/*****************************************************************************/
+
+/*
+ *	Following is a set of defines and structures used to actually deal
+ *	with the serial ports on the board. Firstly is the set of commands
+ *	that can be applied to ports.
+ */
+#define	ASYCMD		(((unsigned long) 'a') << 8)
+
+#define	A_NULL		(ASYCMD | 0)
+#define	A_FLUSH		(ASYCMD | 1)
+#define	A_BREAK		(ASYCMD | 2)
+#define	A_GETPORT	(ASYCMD | 3)
+#define	A_SETPORT	(ASYCMD | 4)
+#define	A_SETPORTF	(ASYCMD | 5)
+#define	A_SETPORTFTX	(ASYCMD | 6)
+#define	A_SETPORTFRX	(ASYCMD | 7)
+#define	A_GETSIGNALS	(ASYCMD | 8)
+#define	A_SETSIGNALS	(ASYCMD | 9)
+#define	A_SETSIGNALSF	(ASYCMD | 10)
+#define	A_SETSIGNALSFTX	(ASYCMD | 11)
+#define	A_SETSIGNALSFRX	(ASYCMD | 12)
+#define	A_GETNOTIFY	(ASYCMD | 13)
+#define	A_SETNOTIFY	(ASYCMD | 14)
+#define	A_NOTIFY	(ASYCMD | 15)
+#define	A_PORTCTRL	(ASYCMD | 16)
+#define	A_GETSTATS	(ASYCMD | 17)
+#define	A_RQSTATE	(ASYCMD | 18)
+#define	A_FLOWSTATE	(ASYCMD | 19)
+#define	A_CLEARSTATS	(ASYCMD | 20)
+
+/*
+ *	Define those arguments used for simple commands.
+ */
+#define	FLUSHRX		0x1
+#define	FLUSHTX		0x2
+
+#define	BREAKON		-1
+#define	BREAKOFF	-2
+
+/*
+ *	Define the port setting structure, and all those defines that go along
+ *	with it. Basically this structure defines the characteristics of this
+ *	port: baud rate, chars, parity, input/output char cooking etc.
+ */
+typedef struct asyport {
+	unsigned long	baudout;
+	unsigned long	baudin;
+	unsigned long	iflag;
+	unsigned long	oflag;
+	unsigned long	lflag;
+	unsigned long	pflag;
+	unsigned long	flow;
+	unsigned long	spare1;
+	unsigned short	vtime;
+	unsigned short	vmin;
+	unsigned short	txlo;
+	unsigned short	txhi;
+	unsigned short	rxlo;
+	unsigned short	rxhi;
+	unsigned short	rxhog;
+	unsigned short	spare2;
+	unsigned char	csize;
+	unsigned char	stopbs;
+	unsigned char	parity;
+	unsigned char	stopin;
+	unsigned char	startin;
+	unsigned char	stopout;
+	unsigned char	startout;
+	unsigned char	parmark;
+	unsigned char	brkmark;
+	unsigned char	cc[11];
+} asyport_t;
+
+#define	PT_STOP1	0x0
+#define	PT_STOP15	0x1
+#define	PT_STOP2	0x2
+
+#define	PT_NOPARITY	0x0
+#define	PT_ODDPARITY	0x1
+#define	PT_EVENPARITY	0x2
+#define	PT_MARKPARITY	0x3
+#define	PT_SPACEPARITY	0x4
+
+#define	F_NONE		0x0
+#define	F_IXON		0x1
+#define	F_IXOFF		0x2
+#define	F_IXANY		0x4
+#define	F_IOXANY	0x8
+#define	F_RTSFLOW	0x10
+#define	F_CTSFLOW	0x20
+#define	F_DTRFLOW	0x40
+#define	F_DCDFLOW	0x80
+#define	F_DSROFLOW	0x100
+#define	F_DSRIFLOW	0x200
+
+#define	FI_NORX		0x1
+#define	FI_RAW		0x2
+#define	FI_ISTRIP	0x4
+#define	FI_UCLC		0x8
+#define	FI_INLCR	0x10
+#define	FI_ICRNL	0x20
+#define	FI_IGNCR	0x40
+#define	FI_IGNBREAK	0x80
+#define	FI_DSCRDBREAK	0x100
+#define	FI_1MARKBREAK	0x200
+#define	FI_2MARKBREAK	0x400
+#define	FI_XCHNGBREAK	0x800
+#define	FI_IGNRXERRS	0x1000
+#define	FI_DSCDRXERRS	0x2000
+#define	FI_1MARKRXERRS	0x4000
+#define	FI_2MARKRXERRS	0x8000
+#define	FI_XCHNGRXERRS	0x10000
+#define	FI_DSCRDNULL	0x20000
+
+#define	FO_OLCUC	0x1
+#define	FO_ONLCR	0x2
+#define	FO_OOCRNL	0x4
+#define	FO_ONOCR	0x8
+#define	FO_ONLRET	0x10
+#define	FO_ONL		0x20
+#define	FO_OBS		0x40
+#define	FO_OVT		0x80
+#define	FO_OFF		0x100
+#define	FO_OTAB1	0x200
+#define	FO_OTAB2	0x400
+#define	FO_OTAB3	0x800
+#define	FO_OCR1		0x1000
+#define	FO_OCR2		0x2000
+#define	FO_OCR3		0x4000
+#define	FO_OFILL	0x8000
+#define	FO_ODELL	0x10000
+
+#define	P_RTSLOCK	0x1
+#define	P_CTSLOCK	0x2
+#define	P_MAPRTS	0x4
+#define	P_MAPCTS	0x8
+#define	P_LOOPBACK	0x10
+#define	P_DTRFOLLOW	0x20
+#define	P_FAKEDCD	0x40
+
+#define	P_RXIMIN	0x10000
+#define	P_RXITIME	0x20000
+#define	P_RXTHOLD	0x40000
+
+/*
+ *	Define a structure to communicate serial port signal and data state
+ *	information.
+ */
+typedef struct asysigs {
+	unsigned long	data;
+	unsigned long	signal;
+	unsigned long	sigvalue;
+} asysigs_t;
+
+#define	DT_TXBUSY	0x1
+#define	DT_TXEMPTY	0x2
+#define	DT_TXLOW	0x4
+#define	DT_TXHIGH	0x8
+#define	DT_TXFULL	0x10
+#define	DT_TXHOG	0x20
+#define	DT_TXFLOWED	0x40
+#define	DT_TXBREAK	0x80
+
+#define	DT_RXBUSY	0x100
+#define	DT_RXEMPTY	0x200
+#define	DT_RXLOW	0x400
+#define	DT_RXHIGH	0x800
+#define	DT_RXFULL	0x1000
+#define	DT_RXHOG	0x2000
+#define	DT_RXFLOWED	0x4000
+#define	DT_RXBREAK	0x8000
+
+#define	SG_DTR		0x1
+#define	SG_DCD		0x2
+#define	SG_RTS		0x4
+#define	SG_CTS		0x8
+#define	SG_DSR		0x10
+#define	SG_RI		0x20
+
+/*
+ *	Define the notification setting structure. This is used to tell the
+ *	port what events we want to be informed about. Fields here use the
+ *	same defines as for the asysigs structure above.
+ */
+typedef struct asynotify {
+	unsigned long	ctrl;
+	unsigned long	data;
+	unsigned long	signal;
+	unsigned long	sigvalue;
+} asynotify_t;
+
+/*
+ *	Define the port control structure. It is used to do fine grain
+ *	control operations on the port.
+ */
+typedef struct {
+	unsigned long	rxctrl;
+	unsigned long	txctrl;
+	char		rximdch;
+	char		tximdch;
+	char		spare1;
+	char		spare2;
+} asyctrl_t;
+
+#define	CT_ENABLE	0x1
+#define	CT_DISABLE	0x2
+#define	CT_STOP		0x4
+#define	CT_START	0x8
+#define	CT_STARTFLOW	0x10
+#define	CT_STOPFLOW	0x20
+#define	CT_SENDCHR	0x40
+
+/*
+ *	Define the stats structure kept for each port. This is a useful set
+ *	of data collected for each port on the slave. The A_GETSTATS command
+ *	is used to retrieve this data from the slave.
+ */
+typedef struct asystats {
+	unsigned long	opens;
+	unsigned long	txchars;
+	unsigned long	rxchars;
+	unsigned long	txringq;
+	unsigned long	rxringq;
+	unsigned long	txmsgs;
+	unsigned long	rxmsgs;
+	unsigned long	txflushes;
+	unsigned long	rxflushes;
+	unsigned long	overruns;
+	unsigned long	framing;
+	unsigned long	parity;
+	unsigned long	ringover;
+	unsigned long	lost;
+	unsigned long	rxstart;
+	unsigned long	rxstop;
+	unsigned long	txstart;
+	unsigned long	txstop;
+	unsigned long	dcdcnt;
+	unsigned long	dtrcnt;
+	unsigned long	ctscnt;
+	unsigned long	rtscnt;
+	unsigned long	dsrcnt;
+	unsigned long	ricnt;
+	unsigned long	txbreaks;
+	unsigned long	rxbreaks;
+	unsigned long	signals;
+	unsigned long	state;
+	unsigned long	hwid;
+} asystats_t;
+
+/*****************************************************************************/
+
+/*
+ *	All command and control communication with a device on the slave is
+ *	via a control block in shared memory. Each device has its own control
+ *	block, defined by the following structure. The control block allows
+ *	the host to open, close and control the device on the slave.
+ */
+typedef struct cdkctrl {
+	unsigned char	open;
+	unsigned char	close;
+	unsigned long	openarg;
+	unsigned long	closearg;
+	unsigned long	cmd;
+	unsigned long	status;
+	unsigned long	args[32];
+} cdkctrl_t;
+
+/*
+ *	Each device on the slave passes data to and from the host via a ring
+ *	queue in shared memory. Define a ring queue structure to hold the
+ *	vital information about each ring queue. Two ring queues will be
+ *	allocated for each port, one for receive data and one for transmit
+ *	data.
+ */
+typedef struct cdkasyrq {
+	unsigned long	offset;
+	unsigned short	size;
+	unsigned short	head;
+	unsigned short	tail;
+} cdkasyrq_t;
+
+/*
+ *	Each asynchronous port is defined in shared memory by the following
+ *	structure. It contains a control block to command a device, and also
+ *	the necessary data channel information as well.
+ */
+typedef struct cdkasy {
+	cdkctrl_t	ctrl;
+	unsigned short	notify;
+	asynotify_t	changed;
+	unsigned short	receive;
+	cdkasyrq_t	rxq;
+	unsigned short	transmit;
+	cdkasyrq_t	txq;
+} cdkasy_t;
+
+#pragma	pack()
+
+/*****************************************************************************/
+
+/*
+ *	Define the set of ioctls used by the driver to do special things
+ *	to the board. These include interrupting it, and initializing
+ *	the driver after board startup and shutdown.
+ */
+#include <linux/ioctl.h>
+
+#define	STL_BINTR	_IO('s',20)
+#define	STL_BSTART	_IO('s',21)
+#define	STL_BSTOP	_IO('s',22)
+#define	STL_BRESET	_IO('s',23)
+
+/*
+ *	Define a set of ioctl extensions, used to get at special stuff.
+ */
+#define	STL_GETPFLAG	_IO('s',80)
+#define	STL_SETPFLAG	_IO('s',81)
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
new file mode 100644
index 000000000000..b68fdf1f3156
--- /dev/null
+++ b/include/linux/cdrom.h
@@ -0,0 +1,1192 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers 
+ * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
+ *               1994, 1995   Eberhard Moenkeberg, emoenke@gwdg.de
+ *               1996         David van Leeuwen, david@tm.tno.nl
+ *               1997, 1998   Erik Andersen, andersee@debian.org
+ *               1998-2002    Jens Axboe, axboe@suse.de
+ */
+ 
+#ifndef	_LINUX_CDROM_H
+#define	_LINUX_CDROM_H
+
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
+ * (and only this) include file.  It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various 
+ * device drivers that actually talk to the drives.  There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will 
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs 
+ * should use the O_NONBLOCK option when opening a CD-ROM device 
+ * for subsequent ioctl commands.  This allows for neat system errors 
+ * like "No medium found" or "Wrong medium type" upon attempting to 
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ *       -    drive = open("/dev/cdrom", O_RDONLY);
+ *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ *  Patches for many common CD programs (provided by David A. van Leeuwen)
+ *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ * 
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are 
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
+ * borrow the "Operation not supported" error from the network folks to 
+ * accomplish this.  Maybe someday we will get a more targeted error code, 
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands  -- these should be supported by 
+ * all the various cdrom drivers.  For the CD-ROM ioctls, we 
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
+#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
+                                           (struct cdrom_ti) */
+#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
+                                           (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
+                                           (struct cdrom_tocentry) */
+#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
+#define CDROMSTART		0x5308 /* Start the cdrom drive */
+#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL		0x530a /* Control output volume 
+                                           (struct cdrom_volctrl) */
+#define CDROMSUBCHNL		0x530b /* Read subchannel data 
+                                           (struct cdrom_subchnl) */
+#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
+                                           (struct cdrom_read) */
+#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
+                                           (struct cdrom_read) */
+#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
+                                           address of multi session disks 
+                                           (struct cdrom_multisession) */
+#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
+                                           if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is depricated, 
+                                          but here anyway for compatibility */
+#define CDROMRESET		0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
+                                          (struct cdrom_volctrl) */
+#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
+                                           (struct cdrom_read) */
+/* 
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
+#define CDROMSEEK		0x5316  /* seek msf address */
+  
+/*
+ * This ioctl is only used by the scsi-cd driver.  
+   It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
+
+/* 
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL		0x5318	/* read all 2646 bytes */
+
+/* 
+ * These ioctls are (now) only in ide-cd.c for controlling 
+ * drive spindown time.  They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ *  -Erik
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+
+/* 
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
+#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
+#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
+#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
+#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
+#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
+					/* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT		0x5390  /* Read structure */
+#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
+#define DVD_AUTH		0x5392  /* Authentication */
+
+#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
+#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0		
+{
+	__u8	minute;
+	__u8	second;
+	__u8	frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr		
+{
+	struct cdrom_msf0	msf;
+	int			lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */ 
+struct cdrom_msf 
+{
+	__u8	cdmsf_min0;	/* start minute */
+	__u8	cdmsf_sec0;	/* start second */
+	__u8	cdmsf_frame0;	/* start frame */
+	__u8	cdmsf_min1;	/* end minute */
+	__u8	cdmsf_sec1;	/* end second */
+	__u8	cdmsf_frame1;	/* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti 
+{
+	__u8	cdti_trk0;	/* start track */
+	__u8	cdti_ind0;	/* start index */
+	__u8	cdti_trk1;	/* end track */
+	__u8	cdti_ind1;	/* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr 	
+{
+	__u8	cdth_trk0;	/* start track */
+	__u8	cdth_trk1;	/* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+	__u8	channel0;
+	__u8	channel1;
+	__u8	channel2;
+	__u8	channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl 
+{
+	__u8	cdsc_format;
+	__u8	cdsc_audiostatus;
+	__u8	cdsc_adr:	4;
+	__u8	cdsc_ctrl:	4;
+	__u8	cdsc_trk;
+	__u8	cdsc_ind;
+	union cdrom_addr cdsc_absaddr;
+	union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry 
+{
+	__u8	cdte_track;
+	__u8	cdte_adr	:4;
+	__u8	cdte_ctrl	:4;
+	__u8	cdte_format;
+	union cdrom_addr cdte_addr;
+	__u8	cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read      
+{
+	int	cdread_lba;
+	char 	*cdread_bufaddr;
+	int	cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+	union cdrom_addr addr; /* frame address */
+	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
+	int nframes;           /* number of 2352-byte-frames to read at once */
+	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+	union cdrom_addr addr; /* frame address: start-of-last-session 
+	                           (not the new "frame 16"!).  Only valid
+	                           if the "xa_flag" is true. */
+	__u8 xa_flag;        /* 1: "is XA disk" */
+	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.  
+ * Very few audio discs actually have Universal Product Code information, 
+ * which should just be the Medium Catalog Number on the box.  Also note 
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */  
+struct cdrom_mcn 
+{
+  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk 
+{
+	unsigned from;
+	unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE	12
+
+#define CGC_DATA_UNKNOWN	0
+#define CGC_DATA_WRITE		1
+#define CGC_DATA_READ		2
+#define CGC_DATA_NONE		3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char		__user *buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	__user *sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			__user *reserved[1];	/* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
+ * 2340, or 2352 bytes long.  
+
+*         Sector types of the standard CD-ROM data formats:
+ *
+ * format   sector type               user data size (bytes)
+ * -----------------------------------------------------------------------------
+ *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
+ *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
+ *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
+ *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
+ *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
+ *
+ *
+ *       The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red):                  | audio_sample_bytes |
+ *                                 |        2352        |
+ *
+ * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
+ *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
+ *
+ * - data (yellow, mode2):         | sync - head - data |
+ *                                 |  12  -   4  - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ *                                 |  12  -   4  -  8  - 2324 -  4    |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS              74 /* max. minutes per CD, not really a limit */
+#define CD_SECS              60 /* seconds per minute */
+#define CD_FRAMES            75 /* frames per second */
+#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define	CDROM_DATA_TRACK	0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define	CDROM_LEADOUT		0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
+#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
+#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
+#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
+#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
+#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */ 
+#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
+#define CDC_LOCK		0x4     /* disable manual eject */
+#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
+#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
+#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
+#define CDC_MCN			0x40    /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
+#define CDC_PLAY_AUDIO		0x100   /* audio functions */
+#define CDC_RESET               0x200   /* hard reset device */
+#define CDC_IOCTLS              0x400   /* driver has non-standard ioctls */
+#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
+#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
+#define CDC_CD_R		0x2000	/* drive is a CD-R */
+#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
+#define CDC_DVD			0x8000	/* drive is a DVD */
+#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
+#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
+#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
+#define CDC_MRW			0x80000 /* drive can read MRW */
+#define CDC_MRW_W		0x100000 /* drive can write MRW */
+#define CDC_RAM			0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO		0	/* if not implemented */
+#define CDS_NO_DISC		1
+#define CDS_TRAY_OPEN		2
+#define CDS_DRIVE_NOT_READY	3
+#define CDS_DISC_OK		4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO		100
+#define CDS_DATA_1		101
+#define CDS_DATA_2		102
+#define CDS_XA_2_1		103
+#define CDS_XA_2_2		104
+#define CDS_MIXED		105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
+#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
+#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
+#define CDO_LOCK		0x8     /* lock tray on open files */
+#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE       	((int) (~0U>>1)-1)
+#define CDSL_CURRENT    	((int) (~0U>>1))
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX		64
+#define CD_PART_MASK		(CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SEND_CUE_SHEET		    0x5d
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+/* This is listed as optional in ATAPI 2.6, but is (curiously) 
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode 
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE		0x00
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_WCACHING_PAGE		0x08
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL	0x00
+#define DVD_STRUCT_COPYRIGHT	0x01
+#define DVD_STRUCT_DISCKEY	0x02
+#define DVD_STRUCT_BCA		0x03
+#define DVD_STRUCT_MANUFACT	0x04
+
+struct dvd_layer {
+	__u8 book_version	: 4;
+	__u8 book_type		: 4;
+	__u8 min_rate		: 4;
+	__u8 disc_size		: 4;
+	__u8 layer_type		: 4;
+	__u8 track_path		: 1;
+	__u8 nlayers		: 2;
+	__u8 track_density	: 4;
+	__u8 linear_density	: 4;
+	__u8 bca		: 1;
+	__u32 start_sector;
+	__u32 end_sector;
+	__u32 end_sector_l0;
+};
+
+#define DVD_LAYERS	4
+
+struct dvd_physical {
+	__u8 type;
+	__u8 layer_num;
+	struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+	__u8 type;
+
+	__u8 layer_num;
+	__u8 cpst;
+	__u8 rmi;
+};
+
+struct dvd_disckey {
+	__u8 type;
+
+	unsigned agid		: 2;
+	__u8 value[2048];
+};
+
+struct dvd_bca {
+	__u8 type;
+
+	int len;
+	__u8 value[188];
+};
+
+struct dvd_manufact {
+	__u8 type;
+
+	__u8 layer_num;
+	int len;
+	__u8 value[2048];
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_physical	physical;
+	struct dvd_copyright	copyright;
+	struct dvd_disckey	disckey;
+	struct dvd_bca		bca;
+	struct dvd_manufact	manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID	0
+#define DVD_HOST_SEND_CHALLENGE	1
+#define DVD_LU_SEND_KEY1	2
+#define DVD_LU_SEND_CHALLENGE	3
+#define DVD_HOST_SEND_KEY2	4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED	5
+#define DVD_AUTH_FAILURE	6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY	7
+#define DVD_LU_SEND_ASF		8
+#define DVD_INVALIDATE_AGID	9
+#define DVD_LU_SEND_RPC_STATE	10
+#define DVD_HOST_SEND_RPC_STATE	11
+
+/* State data */
+typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+	__u8 type;
+	unsigned agid		: 2;
+};
+
+struct dvd_host_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+struct dvd_send_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT	0
+#define DVD_CPM_COPYRIGHTED	1
+
+#define DVD_CP_SEC_NONE		0
+#define DVD_CP_SEC_EXIST	1
+
+#define DVD_CGMS_UNRESTRICTED	0
+#define DVD_CGMS_SINGLE		2
+#define DVD_CGMS_RESTRICTED	3
+
+struct dvd_lu_send_title_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key title_key;
+	int lba;
+	unsigned cpm		: 1;
+	unsigned cp_sec		: 1;
+	unsigned cgms		: 2;
+};
+
+struct dvd_lu_send_asf {
+	__u8 type;
+	unsigned agid		: 2;
+
+	unsigned asf		: 1;
+};
+
+struct dvd_host_send_rpcstate {
+	__u8 type;
+	__u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+	__u8 type		: 2;
+	__u8 vra		: 3;
+	__u8 ucca		: 3;
+	__u8 region_mask;
+	__u8 rpc_scheme;
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_lu_send_agid		lsa;
+	struct dvd_host_send_challenge	hsc;
+	struct dvd_send_key		lsk;
+	struct dvd_lu_send_challenge	lsc;
+	struct dvd_send_key		hsk;
+	struct dvd_lu_send_title_key	lstk;
+	struct dvd_lu_send_asf		lsasf;
+	struct dvd_host_send_rpcstate	hrpcs;
+	struct dvd_lu_send_rpcstate	lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 valid		: 1;
+	__u8 error_code		: 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 error_code		: 7;
+	__u8 valid		: 1;
+#endif
+	__u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 ili		: 1;
+	__u8 reserved2		: 1;
+	__u8 sense_key		: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 sense_key		: 4;
+	__u8 reserved2		: 1;
+	__u8 ili		: 1;
+	__u8 reserved1		: 2;
+#endif
+	__u8 information[4];
+	__u8 add_sense_len;
+	__u8 command_info[4];
+	__u8 asc;
+	__u8 ascq;
+	__u8 fruc;
+	__u8 sks[3];
+	__u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT	0x0020	/* "Random Writable" */
+#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
+#define CDF_MRW 	0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW			0
+#define CDM_MRW_BGFORMAT_INACTIVE	1
+#define CDM_MRW_BGFORMAT_ACTIVE		2
+#define CDM_MRW_BGFORMAT_COMPLETE	3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA			0
+#define MRW_LBA_GAA			1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1		0x2c
+#define MRW_MODE_PC			0x03
+
+struct mrw_feature_desc {
+	__u16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 write		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 write		: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+	__u8 reserved4;
+	__u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+	__u16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+	__u32 last_lba;
+	__u32 block_size;
+	__u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 page_present	: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_present	: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+};
+
+typedef struct {
+	__u16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1			: 3;
+        __u8 erasable			: 1;
+        __u8 border_status		: 2;
+        __u8 disc_status		: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 disc_status		: 2;
+        __u8 border_status		: 2;
+        __u8 erasable			: 1;
+	__u8 reserved1			: 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 n_first_track;
+	__u8 n_sessions_lsb;
+	__u8 first_track_lsb;
+	__u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 did_v			: 1;
+        __u8 dbc_v			: 1;
+        __u8 uru			: 1;
+        __u8 reserved2			: 2;
+	__u8 dbit			: 1;
+	__u8 mrw_status			: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 mrw_status			: 2;
+	__u8 dbit			: 1;
+        __u8 reserved2			: 2;
+        __u8 uru			: 1;
+        __u8 dbc_v			: 1;
+	__u8 did_v			: 1;
+#endif
+	__u8 disc_type;
+	__u8 n_sessions_msb;
+	__u8 first_track_msb;
+	__u8 last_track_msb;
+	__u32 disc_id;
+	__u32 lead_in;
+	__u32 lead_out;
+	__u8 disc_bar_code[8];
+	__u8 reserved3;
+	__u8 n_opc;
+} disc_information;
+
+typedef struct {
+	__u16 track_information_length;
+	__u8 track_lsb;
+	__u8 session_lsb;
+	__u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2			: 2;
+        __u8 damage			: 1;
+        __u8 copy			: 1;
+        __u8 track_mode			: 4;
+	__u8 rt				: 1;
+	__u8 blank			: 1;
+	__u8 packet			: 1;
+	__u8 fp				: 1;
+	__u8 data_mode			: 4;
+	__u8 reserved3			: 6;
+	__u8 lra_v			: 1;
+	__u8 nwa_v			: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 track_mode			: 4;
+        __u8 copy			: 1;
+        __u8 damage			: 1;
+	__u8 reserved2			: 2;
+	__u8 data_mode			: 4;
+	__u8 fp				: 1;
+	__u8 packet			: 1;
+	__u8 blank			: 1;
+	__u8 rt				: 1;
+	__u8 nwa_v			: 1;
+	__u8 lra_v			: 1;
+	__u8 reserved3			: 6;
+#endif
+	__u32 track_start;
+	__u32 next_writable;
+	__u32 free_blocks;
+	__u32 fixed_packet_size;
+	__u32 track_size;
+	__u32 last_rec_address;
+} track_information;
+
+struct feature_header {
+	__u32 data_len;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u16 curr_profile;
+};
+
+struct mode_page_header {
+	__u16 mode_data_length;
+	__u8 medium_type;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u8 reserved3;
+	__u16 desc_length;
+};
+
+#ifdef __KERNEL__
+#include <linux/fs.h>		/* not really needed, later.. */
+#include <linux/device.h>
+
+struct packet_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char 		*buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	*sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			*reserved[1];
+};
+
+/*
+ * _OLD will use PIO transfer on atapi devices, _BPC_* will use DMA
+ */
+#define CDDA_OLD		0	/* old style */
+#define CDDA_BPC_SINGLE		1	/* single frame block pc */
+#define CDDA_BPC_FULL		2	/* multi frame block pc */
+
+/* Uniform cdrom data structures for cdrom.c */
+struct cdrom_device_info {
+	struct cdrom_device_ops  *ops;  /* link to device_ops */
+	struct cdrom_device_info *next; /* next device_info for this major */
+	struct gendisk *disk;		/* matching block layer disk */
+	void *handle;		        /* driver-dependent data */
+/* specifications */
+	int mask;                       /* mask of capability: disables them */
+	int speed;			/* maximum speed for reading data */
+	int capacity;			/* number of discs in jukebox */
+/* device-related storage */
+	int options		: 30;	/* options flags */
+	unsigned mc_flags	: 2;	/* media change buffer flags */
+    	int use_count;                  /* number of times device opened */
+    	char name[20];                  /* name of the device type */
+/* per-device flags */
+        __u8 sanyo_slot		: 2;	/* Sanyo 3 CD changer support */
+        __u8 reserved		: 6;	/* not used yet */
+	int cdda_method;		/* see flags */
+	__u8 last_sense;
+	__u8 media_written;		/* dirty flag, DVD+RW bookkeeping */
+	unsigned short mmc3_profile;	/* current MMC3 profile */
+	int for_data;
+	int (*exit)(struct cdrom_device_info *);
+	int mrw_mode_page;
+};
+
+struct cdrom_device_ops {
+/* routines */
+	int (*open) (struct cdrom_device_info *, int);
+	void (*release) (struct cdrom_device_info *);
+	int (*drive_status) (struct cdrom_device_info *, int);
+	int (*media_changed) (struct cdrom_device_info *, int);
+	int (*tray_move) (struct cdrom_device_info *, int);
+	int (*lock_door) (struct cdrom_device_info *, int);
+	int (*select_speed) (struct cdrom_device_info *, int);
+	int (*select_disc) (struct cdrom_device_info *, int);
+	int (*get_last_session) (struct cdrom_device_info *,
+				 struct cdrom_multisession *);
+	int (*get_mcn) (struct cdrom_device_info *,
+			struct cdrom_mcn *);
+	/* hard reset device */
+	int (*reset) (struct cdrom_device_info *);
+	/* play stuff */
+	int (*audio_ioctl) (struct cdrom_device_info *,unsigned int, void *);
+	/* dev-specific */
+ 	int (*dev_ioctl) (struct cdrom_device_info *,
+			  unsigned int, unsigned long);
+/* driver specifications */
+	const int capability;   /* capability flags */
+	int n_minors;           /* number of active minor devices */
+	/* handle uniform packets for scsi type devices (scsi,atapi) */
+	int (*generic_packet) (struct cdrom_device_info *,
+			       struct packet_command *);
+};
+
+/* the general block_device operations structure: */
+extern int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip,
+			struct file *fp);
+extern int cdrom_release(struct cdrom_device_info *cdi, struct file *fp);
+extern int cdrom_ioctl(struct file *file, struct cdrom_device_info *cdi,
+		struct inode *ip, unsigned int cmd, unsigned long arg);
+extern int cdrom_media_changed(struct cdrom_device_info *);
+
+extern int register_cdrom(struct cdrom_device_info *cdi);
+extern int unregister_cdrom(struct cdrom_device_info *cdi);
+
+typedef struct {
+    int data;
+    int audio;
+    int cdi;
+    int xa;
+    long error;
+} tracktype;
+
+extern int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written);
+extern int cdrom_number_of_slots(struct cdrom_device_info *cdi);
+extern int cdrom_mode_select(struct cdrom_device_info *cdi,
+			     struct packet_command *cgc);
+extern int cdrom_mode_sense(struct cdrom_device_info *cdi,
+			    struct packet_command *cgc,
+			    int page_code, int page_control);
+extern void init_cdrom_command(struct packet_command *cgc,
+			       void *buffer, int len, int type);
+
+/* The SCSI spec says there could be 256 slots. */
+#define CDROM_MAX_SLOTS	256
+
+struct cdrom_mechstat_header {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 fault         : 1;
+	__u8 changer_state : 2;
+	__u8 curslot       : 5;
+	__u8 mech_state    : 3;
+	__u8 door_open     : 1;
+	__u8 reserved1     : 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curslot       : 5;
+	__u8 changer_state : 2;
+	__u8 fault         : 1;
+	__u8 reserved1     : 4;
+	__u8 door_open     : 1;
+	__u8 mech_state    : 3;
+#endif
+	__u8     curlba[3];
+	__u8     nslots;
+	__u16 slot_tablelen;
+};
+
+struct cdrom_slot {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 disc_present : 1;
+	__u8 reserved1    : 6;
+	__u8 change       : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 change       : 1;
+	__u8 reserved1    : 6;
+	__u8 disc_present : 1;
+#endif
+	__u8 reserved2[3];
+};
+
+struct cdrom_changer_info {
+	struct cdrom_mechstat_header hdr;
+	struct cdrom_slot slots[CDROM_MAX_SLOTS];
+};
+
+typedef enum {
+	mechtype_caddy = 0,
+	mechtype_tray  = 1,
+	mechtype_popup = 2,
+	mechtype_individual_changer = 4,
+	mechtype_cartridge_changer  = 5
+} mechtype_t;
+
+typedef struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 ps			: 1;
+	__u8 reserved1		: 1;
+	__u8 page_code		: 6;
+        __u8 page_length;
+	__u8 reserved2		: 1;
+	__u8 bufe		: 1;
+	__u8 ls_v		: 1;
+	__u8 test_write		: 1;
+        __u8 write_type		: 4;
+	__u8 multi_session	: 2; /* or border, DVD */
+	__u8 fp			: 1;
+	__u8 copy		: 1;
+	__u8 track_mode		: 4;
+	__u8 reserved3		: 4;
+	__u8 data_block_type	: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_code		: 6;
+	__u8 reserved1		: 1;
+	__u8 ps			: 1;
+        __u8 page_length;
+        __u8 write_type		: 4;
+	__u8 test_write		: 1;
+	__u8 ls_v		: 1;
+	__u8 bufe		: 1;
+	__u8 reserved2		: 1;
+	__u8 track_mode		: 4;
+	__u8 copy		: 1;
+	__u8 fp			: 1;
+	__u8 multi_session	: 2; /* or border, DVD */
+	__u8 data_block_type	: 4;
+	__u8 reserved3		: 4;
+#endif
+	__u8 link_size;
+	__u8 reserved4;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved5		: 2;
+	__u8 app_code		: 6;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 app_code		: 6;
+	__u8 reserved5		: 2;
+#endif
+	__u8 session_format;
+	__u8 reserved6;
+	__u32 packet_size;
+	__u16 audio_pause;
+	__u8 mcn[16];
+	__u8 isrc[16];
+	__u8 subhdr0;
+	__u8 subhdr1;
+	__u8 subhdr2;
+	__u8 subhdr3;
+} __attribute__((packed)) write_param_page;
+
+struct modesel_head
+{
+	__u8	reserved1;
+	__u8	medium;
+	__u8	reserved2;
+	__u8	block_desc_length;
+	__u8	density;
+	__u8	number_of_blocks_hi;
+	__u8	number_of_blocks_med;
+	__u8	number_of_blocks_lo;
+	__u8	reserved3;
+	__u8	block_length_hi;
+	__u8	block_length_med;
+	__u8	block_length_lo;
+};
+
+typedef struct {
+	__u16 report_key_length;
+	__u8 reserved1;
+	__u8 reserved2;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type_code			: 2;
+	__u8 vra			: 3;
+	__u8 ucca			: 3;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ucca			: 3;
+	__u8 vra			: 3;
+	__u8 type_code			: 2;
+#endif
+	__u8 region_mask;
+	__u8 rpc_scheme;
+	__u8 reserved3;
+} rpc_state_t;
+
+struct event_header {
+	__u16 data_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 nea		: 1;
+	__u8 reserved1		: 4;
+	__u8 notification_class	: 3;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 notification_class	: 3;
+	__u8 reserved1		: 4;
+	__u8 nea		: 1;
+#endif
+	__u8 supp_event_class;
+};
+
+struct media_event_desc {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 4;
+	__u8 media_event_code	: 4;
+	__u8 reserved2		: 6;
+	__u8 media_present	: 1;
+	__u8 door_open		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 media_event_code	: 4;
+	__u8 reserved1		: 4;
+	__u8 door_open		: 1;
+	__u8 media_present	: 1;
+	__u8 reserved2		: 6;
+#endif
+	__u8 start_slot;
+	__u8 end_slot;
+};
+
+extern int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med);
+
+#endif  /* End of kernel only stuff */ 
+
+#endif  /* _LINUX_CDROM_H */
diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h
new file mode 100644
index 000000000000..a2ed0591fb19
--- /dev/null
+++ b/include/linux/circ_buf.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_CIRC_BUF_H
+#define _LINUX_CIRC_BUF_H 1
+
+struct circ_buf {
+	char *buf;
+	int head;
+	int tail;
+};
+
+/* Return count in buffer.  */
+#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1))
+
+/* Return space available, 0..size-1.  We always leave one free char
+   as a completely full buffer has head == tail, which is the same as
+   empty.  */
+#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size))
+
+/* Return count up to the end of the buffer.  Carefully avoid
+   accessing head and tail more than once, so they can change
+   underneath us without returning inconsistent results.  */
+#define CIRC_CNT_TO_END(head,tail,size) \
+	({int end = (size) - (tail); \
+	  int n = ((head) + end) & ((size)-1); \
+	  n < end ? n : end;})
+
+/* Return space available up to the end of the buffer.  */
+#define CIRC_SPACE_TO_END(head,tail,size) \
+	({int end = (size) - 1 - (head); \
+	  int n = (end + (tail)) & ((size)-1); \
+	  n <= end ? n : end+1;})
+
+#endif /* _LINUX_CIRC_BUF_H  */
diff --git a/include/linux/cobalt-nvram.h b/include/linux/cobalt-nvram.h
new file mode 100644
index 000000000000..ea429562ff36
--- /dev/null
+++ b/include/linux/cobalt-nvram.h
@@ -0,0 +1,109 @@
+/*
+ * $Id: cobalt-nvram.h,v 1.20 2001/10/17 23:16:55 thockin Exp $
+ * cobalt-nvram.h : defines for the various fields in the cobalt NVRAM
+ *
+ * Copyright 2001,2002 Sun Microsystems, Inc.
+ */
+
+#ifndef COBALT_NVRAM_H
+#define COBALT_NVRAM_H
+
+#include <linux/nvram.h>
+
+#define COBT_CMOS_INFO_MAX		0x7f	/* top address allowed */
+#define COBT_CMOS_BIOS_DRIVE_INFO	0x12	/* drive info would go here */
+
+#define COBT_CMOS_CKS_START		NVRAM_OFFSET(0x0e)
+#define COBT_CMOS_CKS_END		NVRAM_OFFSET(0x7f)
+
+/* flag bytes - 16 flags for now, leave room for more */
+#define COBT_CMOS_FLAG_BYTE_0		NVRAM_OFFSET(0x10)
+#define COBT_CMOS_FLAG_BYTE_1		NVRAM_OFFSET(0x11)
+
+/* flags in flag bytes - up to 16 */
+#define COBT_CMOS_FLAG_MIN		0x0001
+#define COBT_CMOS_CONSOLE_FLAG		0x0001 /* console on/off */
+#define COBT_CMOS_DEBUG_FLAG		0x0002 /* ROM debug messages */
+#define COBT_CMOS_AUTO_PROMPT_FLAG	0x0004 /* boot to ROM prompt? */
+#define COBT_CMOS_CLEAN_BOOT_FLAG	0x0008 /* set by a clean shutdown */
+#define COBT_CMOS_HW_NOPROBE_FLAG	0x0010 /* go easy on the probing */
+#define COBT_CMOS_SYSFAULT_FLAG		0x0020 /* system fault detected */
+#define COBT_CMOS_OOPSPANIC_FLAG	0x0040 /* panic on oops */
+#define COBT_CMOS_DELAY_CACHE_FLAG	0x0080 /* delay cache initialization */
+#define COBT_CMOS_NOLOGO_FLAG		0x0100 /* hide "C" logo @ boot */
+#define COBT_CMOS_VERSION_FLAG		0x0200 /* the version field is valid */
+#define COBT_CMOS_FLAG_MAX		0x0200
+
+/* leave byte 0x12 blank - Linux looks for drive info here */
+
+/* CMOS structure version, valid if COBT_CMOS_VERSION_FLAG is true */
+#define COBT_CMOS_VERSION		NVRAM_OFFSET(0x13)
+#define COBT_CMOS_VER_BTOCODE		1 /* min. version needed for btocode */
+
+/* index of default boot method */
+#define COBT_CMOS_BOOT_METHOD		NVRAM_OFFSET(0x20)
+#define COBT_CMOS_BOOT_METHOD_DISK	0
+#define COBT_CMOS_BOOT_METHOD_ROM	1
+#define COBT_CMOS_BOOT_METHOD_NET	2
+
+#define COBT_CMOS_BOOT_DEV_MIN		NVRAM_OFFSET(0x21)
+/* major #, minor # of first through fourth boot device */
+#define COBT_CMOS_BOOT_DEV0_MAJ		NVRAM_OFFSET(0x21)
+#define COBT_CMOS_BOOT_DEV0_MIN		NVRAM_OFFSET(0x22)
+#define COBT_CMOS_BOOT_DEV1_MAJ		NVRAM_OFFSET(0x23)
+#define COBT_CMOS_BOOT_DEV1_MIN		NVRAM_OFFSET(0x24)
+#define COBT_CMOS_BOOT_DEV2_MAJ		NVRAM_OFFSET(0x25)
+#define COBT_CMOS_BOOT_DEV2_MIN		NVRAM_OFFSET(0x26)
+#define COBT_CMOS_BOOT_DEV3_MAJ		NVRAM_OFFSET(0x27)
+#define COBT_CMOS_BOOT_DEV3_MIN		NVRAM_OFFSET(0x28)
+#define COBT_CMOS_BOOT_DEV_MAX		NVRAM_OFFSET(0x28)
+
+/* checksum of bytes 0xe-0x7f */
+#define COBT_CMOS_CHECKSUM		NVRAM_OFFSET(0x2e)
+
+/* running uptime counter, units of 5 minutes (32 bits =~ 41000 years) */
+#define COBT_CMOS_UPTIME_0		NVRAM_OFFSET(0x30)
+#define COBT_CMOS_UPTIME_1		NVRAM_OFFSET(0x31)
+#define COBT_CMOS_UPTIME_2		NVRAM_OFFSET(0x32)
+#define COBT_CMOS_UPTIME_3		NVRAM_OFFSET(0x33)
+
+/* count of successful boots (32 bits) */
+#define COBT_CMOS_BOOTCOUNT_0		NVRAM_OFFSET(0x38)
+#define COBT_CMOS_BOOTCOUNT_1		NVRAM_OFFSET(0x39)
+#define COBT_CMOS_BOOTCOUNT_2		NVRAM_OFFSET(0x3a)
+#define COBT_CMOS_BOOTCOUNT_3		NVRAM_OFFSET(0x3b)
+
+/* 13 bytes: system serial number, same as on the back of the system */
+#define COBT_CMOS_SYS_SERNUM_LEN	13
+#define COBT_CMOS_SYS_SERNUM_0		NVRAM_OFFSET(0x40)
+#define COBT_CMOS_SYS_SERNUM_1		NVRAM_OFFSET(0x41)
+#define COBT_CMOS_SYS_SERNUM_2		NVRAM_OFFSET(0x42)
+#define COBT_CMOS_SYS_SERNUM_3		NVRAM_OFFSET(0x43)
+#define COBT_CMOS_SYS_SERNUM_4		NVRAM_OFFSET(0x44)
+#define COBT_CMOS_SYS_SERNUM_5		NVRAM_OFFSET(0x45)
+#define COBT_CMOS_SYS_SERNUM_6		NVRAM_OFFSET(0x46)
+#define COBT_CMOS_SYS_SERNUM_7		NVRAM_OFFSET(0x47)
+#define COBT_CMOS_SYS_SERNUM_8		NVRAM_OFFSET(0x48)
+#define COBT_CMOS_SYS_SERNUM_9		NVRAM_OFFSET(0x49)
+#define COBT_CMOS_SYS_SERNUM_10		NVRAM_OFFSET(0x4a)
+#define COBT_CMOS_SYS_SERNUM_11		NVRAM_OFFSET(0x4b)
+#define COBT_CMOS_SYS_SERNUM_12		NVRAM_OFFSET(0x4c)
+/* checksum for serial num - 1 byte */
+#define COBT_CMOS_SYS_SERNUM_CSUM	NVRAM_OFFSET(0x4f)
+
+#define COBT_CMOS_ROM_REV_MAJ		NVRAM_OFFSET(0x50)
+#define COBT_CMOS_ROM_REV_MIN		NVRAM_OFFSET(0x51)
+#define COBT_CMOS_ROM_REV_REV		NVRAM_OFFSET(0x52)
+
+#define COBT_CMOS_BTO_CODE_0		NVRAM_OFFSET(0x53)
+#define COBT_CMOS_BTO_CODE_1		NVRAM_OFFSET(0x54)
+#define COBT_CMOS_BTO_CODE_2		NVRAM_OFFSET(0x55)
+#define COBT_CMOS_BTO_CODE_3		NVRAM_OFFSET(0x56)
+
+#define COBT_CMOS_BTO_IP_CSUM		NVRAM_OFFSET(0x57)
+#define COBT_CMOS_BTO_IP_0		NVRAM_OFFSET(0x58)
+#define COBT_CMOS_BTO_IP_1		NVRAM_OFFSET(0x59)
+#define COBT_CMOS_BTO_IP_2		NVRAM_OFFSET(0x5a)
+#define COBT_CMOS_BTO_IP_3		NVRAM_OFFSET(0x5b)
+
+#endif /* COBALT_NVRAM_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
new file mode 100644
index 000000000000..bbc5afcd7db6
--- /dev/null
+++ b/include/linux/coda.h
@@ -0,0 +1,788 @@
+/* 
+   You may distribute this file under either of the two licenses that
+   follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+                           Coda File System
+                              Release 5
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                  Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+                        Additional copyrights 
+*/
+
+/*
+
+            Coda: an Experimental Distributed File System
+                             Release 4.0
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                         All Rights Reserved
+
+Permission  to  use, copy, modify and distribute this software and its
+documentation is hereby granted,  provided  that  both  the  copyright
+notice  and  this  permission  notice  appear  in  all  copies  of the
+software, derivative works or  modified  versions,  and  any  portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University  in  all  documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
+SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
+DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
+ANY DERIVATIVE WORK.
+
+Carnegie  Mellon  encourages  users  of  this  software  to return any
+improvements or extensions that  they  make,  and  to  grant  Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by 
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _CODA_HEADER_
+#define _CODA_HEADER_
+
+#include <linux/config.h>
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif 
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else 
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+        long       ts_sec;
+        long       ts_nsec;
+};
+#else  /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#else /*__KERNEL__ */
+typedef unsigned long long u_quad_t;
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+        time_t  tv_sec;         /* seconds */
+        long    tv_nsec;        /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char	      int8_t;
+typedef unsigned char	    u_int8_t;
+typedef short		     int16_t;
+typedef unsigned short	   u_int16_t;
+typedef int		     int32_t;
+typedef unsigned int	   u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN   255
+#define CODA_MAXPATHLEN  1024
+#define CODA_MAXSYMLINK  10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define	C_O_READ	0x001
+#define	C_O_WRITE       0x002
+#define C_O_TRUNC       0x010
+#define C_O_EXCL	0x100
+#define C_O_CREAT	0x200
+
+/* these are to find mode bits in Venus */ 
+#define C_M_READ  00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK    8               /* Test for writing upon create.  */
+#define C_A_R_OK    4               /* Test for read permission.  */
+#define C_A_W_OK    2               /* Test for write permission.  */
+#define C_A_X_OK    1               /* Test for execute permission.  */
+#define C_A_F_OK    0               /* Test for existence.  */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+        u_int32_t d_fileno;		/* file number of entry */
+        u_int16_t d_reclen;		/* length of this record */
+        u_int8_t  d_type;			/* file type, see below */
+        u_int8_t  d_namlen;		/* length of string in d_name */
+        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+                         (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define	CDT_UNKNOWN	 0
+#define	CDT_FIFO	 1
+#define	CDT_CHR		 2
+#define	CDT_DIR		 4
+#define	CDT_BLK		 6
+#define	CDT_REG		 8
+#define	CDT_LNK		10
+#define	CDT_SOCK	12
+#define	CDT_WHT		14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
+#define	CDTTOIF(dirtype)	((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+#ifdef CONFIG_CODA_FS_OLD_API
+struct CodaFid {
+	u_int32_t opaque[3];
+};
+
+static __inline__ ino_t  coda_f2i(struct CodaFid *fid)
+{
+	if ( ! fid ) 
+		return 0; 
+	if (fid->opaque[1] == 0xfffffffe || fid->opaque[1] == 0xffffffff)
+		return ((fid->opaque[0] << 20) | (fid->opaque[2] & 0xfffff));
+	else
+		return (fid->opaque[2] + (fid->opaque[1]<<10) + (fid->opaque[0]<<20));
+}
+
+struct coda_cred {
+    vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, efftve, set, fs uid*/
+    vgid_t cr_groupid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */
+};
+
+#else /* not defined(CONFIG_CODA_FS_OLD_API) */
+
+struct CodaFid {
+	u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#endif
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types.  VNON means no type.
+ */
+enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+	long     	va_type;	/* vnode type (for create) */
+	u_short		va_mode;	/* files access mode and type */
+	short		va_nlink;	/* number of references to file */
+	vuid_t		va_uid;		/* owner user id */
+	vgid_t		va_gid;		/* owner group id */
+	long		va_fileid;	/* file id */
+	u_quad_t	va_size;	/* file size in bytes */
+	long		va_blocksize;	/* blocksize preferred for i/o */
+	struct timespec	va_atime;	/* time of last access */
+	struct timespec	va_mtime;	/* time of last modification */
+	struct timespec	va_ctime;	/* time file changed */
+	u_long		va_gen;		/* generation number of file */
+	u_long		va_flags;	/* flags defined for file */
+	cdev_t	        va_rdev;	/* device special file represents */
+	u_quad_t	va_bytes;	/* bytes of disk space held by file */
+	u_quad_t	va_filerev;	/* file modification number */
+};
+
+#endif 
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+    int32_t f_blocks;
+    int32_t f_bfree;
+    int32_t f_bavail;
+    int32_t f_files;
+    int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT	2
+#define CODA_OPEN_BY_FD	3
+#define CODA_OPEN	4
+#define CODA_CLOSE	5
+#define CODA_IOCTL	6
+#define CODA_GETATTR	7
+#define CODA_SETATTR	8
+#define CODA_ACCESS	9
+#define CODA_LOOKUP	10
+#define CODA_CREATE	11
+#define CODA_REMOVE	12
+#define CODA_LINK	13
+#define CODA_RENAME	14
+#define CODA_MKDIR	15
+#define CODA_RMDIR	16
+#define CODA_SYMLINK	18
+#define CODA_READLINK	19
+#define CODA_FSYNC	20
+#define CODA_VGET	22
+#define CODA_SIGNAL	23
+#define CODA_REPLACE	 24 /* DOWNCALL */
+#define CODA_FLUSH       25 /* DOWNCALL */
+#define CODA_PURGEUSER   26 /* DOWNCALL */
+#define CODA_ZAPFILE     27 /* DOWNCALL */
+#define CODA_ZAPDIR      28 /* DOWNCALL */
+#define CODA_PURGEFID    30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE     32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS	 34
+#define CODA_STORE	 35
+#define CODA_RELEASE	 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE	    8192
+#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
+                            VC_MAXDATASIZE  
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#if 0
+#define CODA_KERNEL_VERSION 0 /* don't care about kernel version number */
+#define CODA_KERNEL_VERSION 1 /* The old venus 4.6 compatible interface */
+#endif
+#ifdef CONFIG_CODA_FS_OLD_API
+#define CODA_KERNEL_VERSION 2 /* venus_lookup got an extra parameter */
+#else
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+#endif
+
+/*
+ *        Venus <-> Coda  RPC arguments
+ */
+struct coda_in_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
+#ifdef CONFIG_CODA_FS_OLD_API
+    u_int16_t pid;	    /* Common to all */
+    u_int16_t pgid;	    /* Common to all */
+    u_int16_t sid;          /* Common to all */
+    struct coda_cred cred;  /* Common to all */
+#else
+    pid_t pid;
+    pid_t pgid;
+    vuid_t uid;
+#endif
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	
+    u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+};
+
+struct coda_root_in {
+    struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_out {
+    struct coda_out_hdr oh;
+    cdev_t	dev;
+    ino_t	inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_store_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_release_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_close_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	cmd;
+    int	len;
+    int	rwflag;
+    char *data;			/* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+    struct coda_out_hdr oh;
+    int	len;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+    struct coda_out_hdr oh;
+    struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_access_out {
+    struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE     0x01
+#define CLU_CASE_INSENSITIVE   0x02
+
+/* coda_lookup: */
+struct  coda_lookup_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int         name;		/* Place holder for data. */
+    int         flags;	
+};
+
+struct coda_lookup_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int excl;
+    int mode;
+    int 	name;		/* Place holder for data. */
+};
+
+struct coda_create_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_remove_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;	/* cnode to link *to* */
+    struct CodaFid destFid;	/* Directory in which to place link */
+    int tname;		/* Place holder for data. */
+};
+
+struct coda_link_out {
+    struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;
+    int 	srcname;
+    struct CodaFid destFid;
+    int 	destname;
+};
+
+struct coda_rename_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int	   name;		/* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;	/* Directory to put symlink in */
+    int srcname;
+    struct coda_vattr attr;
+    int tname;
+};
+
+struct coda_symlink_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+    struct coda_out_hdr oh;
+    int	count;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+    struct coda_out_hdr oh;
+#ifdef CONFIG_CODA_FS_OLD_API
+    struct coda_cred cred;
+#else
+    vuid_t uid;
+#endif
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */	
+struct coda_zapdir_out {	  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */	
+struct coda_purgefid_out { 
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */	
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+    struct coda_out_hdr oh;
+    struct CodaFid NewFid;
+    struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int        flags;
+};
+
+struct coda_open_by_fd_out {
+    struct coda_out_hdr oh;
+    int fd;
+
+#ifdef __KERNEL__
+    struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_by_path_out {
+    struct coda_out_hdr oh;
+	int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+    struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+    struct coda_out_hdr oh;
+    struct coda_statfs stat;
+};
+
+/* 
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
+ * For instance, if the fid is inconsistent. 
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE          0x80000000
+
+union inputArgs {
+    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
+    struct coda_open_in coda_open;
+    struct coda_store_in coda_store;
+    struct coda_release_in coda_release;
+    struct coda_close_in coda_close;
+    struct coda_ioctl_in coda_ioctl;
+    struct coda_getattr_in coda_getattr;
+    struct coda_setattr_in coda_setattr;
+    struct coda_access_in coda_access;
+    struct coda_lookup_in coda_lookup;
+    struct coda_create_in coda_create;
+    struct coda_remove_in coda_remove;
+    struct coda_link_in coda_link;
+    struct coda_rename_in coda_rename;
+    struct coda_mkdir_in coda_mkdir;
+    struct coda_rmdir_in coda_rmdir;
+    struct coda_symlink_in coda_symlink;
+    struct coda_readlink_in coda_readlink;
+    struct coda_fsync_in coda_fsync;
+    struct coda_vget_in coda_vget;
+    struct coda_open_by_fd_in coda_open_by_fd;
+    struct coda_open_by_path_in coda_open_by_path;
+    struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
+    struct coda_root_out coda_root;
+    struct coda_open_out coda_open;
+    struct coda_ioctl_out coda_ioctl;
+    struct coda_getattr_out coda_getattr;
+    struct coda_lookup_out coda_lookup;
+    struct coda_create_out coda_create;
+    struct coda_mkdir_out coda_mkdir;
+    struct coda_readlink_out coda_readlink;
+    struct coda_vget_out coda_vget;
+    struct coda_purgeuser_out coda_purgeuser;
+    struct coda_zapfile_out coda_zapfile;
+    struct coda_zapdir_out coda_zapdir;
+    struct coda_purgefid_out coda_purgefid;
+    struct coda_replace_out coda_replace;
+    struct coda_open_by_fd_out coda_open_by_fd;
+    struct coda_open_by_path_out coda_open_by_path;
+    struct coda_statfs_out coda_statfs;
+};    
+
+union coda_downcalls {
+    /* CODA_INVALIDATE is a venus->kernel call */
+    /* CODA_FLUSH is a venus->kernel call */
+    struct coda_purgeuser_out purgeuser;
+    struct coda_zapfile_out zapfile;
+    struct coda_zapdir_out zapdir;
+    struct coda_purgefid_out purgefid;
+    struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+        void __user *in;        /* Data to be transferred in */
+        void __user *out;       /* Data to be transferred out */
+        u_short in_size;        /* Size of input buffer <= 2K */
+        u_short out_size;       /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+        const char __user *path;
+        int follow;
+        struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL		".CONTROL"
+#define CODA_CONTROLLEN		8
+#define CTL_INO			-1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+	int		version;
+	int		fd;       /* Opened device */
+};
+
+#endif 
+
diff --git a/include/linux/coda_cache.h b/include/linux/coda_cache.h
new file mode 100644
index 000000000000..c910b5eb1ceb
--- /dev/null
+++ b/include/linux/coda_cache.h
@@ -0,0 +1,22 @@
+/* Coda filesystem -- Linux Minicache
+ *
+ * Copyright (C) 1989 - 1997 Carnegie Mellon University
+ *
+ * Carnegie Mellon University encourages users of this software to
+ * contribute improvements to the Coda project. Contact Peter Braam
+ * <coda@cs.cmu.edu>
+ */
+
+#ifndef _CFSNC_HEADER_
+#define _CFSNC_HEADER_
+
+/* credential cache */
+void coda_cache_enter(struct inode *inode, int mask);
+void coda_cache_clear_inode(struct inode *);
+void coda_cache_clear_all(struct super_block *sb);
+int coda_cache_check(struct inode *inode, int mask);
+
+/* for downcalls and attributes and lookups */
+void coda_flag_inode_children(struct inode *inode, int flag);
+
+#endif /* _CFSNC_HEADER_ */
diff --git a/include/linux/coda_fs_i.h b/include/linux/coda_fs_i.h
new file mode 100644
index 000000000000..424fe9cf02c4
--- /dev/null
+++ b/include/linux/coda_fs_i.h
@@ -0,0 +1,55 @@
+/*
+ *  coda_fs_i.h
+ *
+ *  Copyright (C) 1998 Carnegie Mellon University
+ *
+ */
+
+#ifndef _LINUX_CODA_FS_I
+#define _LINUX_CODA_FS_I
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/coda.h>
+
+/*
+ * coda fs inode data
+ */
+struct coda_inode_info {
+        struct CodaFid	   c_fid;	/* Coda identifier */
+        u_short	           c_flags;     /* flags (see below) */
+	struct list_head   c_cilist;    /* list of all coda inodes */
+	unsigned int	   c_mapcount;  /* nr of times this inode is mapped */
+	unsigned int	   c_cached_epoch; /* epoch for cached permissions */
+	vuid_t		   c_uid;	/* fsuid for cached permissions */
+        unsigned int       c_cached_perm; /* cached access permissions */
+	struct inode	   vfs_inode;
+};
+
+/*
+ * coda fs file private data
+ */
+#define CODA_MAGIC 0xC0DAC0DA
+struct coda_file_info {
+	int		   cfi_magic;	  /* magic number */
+	struct file	  *cfi_container; /* container file for this cnode */
+	unsigned int	   cfi_mapcount;  /* nr of times this file is mapped */
+};
+
+#define CODA_FTOC(file) ((struct coda_file_info *)((file)->private_data))
+
+/* flags */
+#define C_VATTR       0x1   /* Validity of vattr in inode */
+#define C_FLUSH       0x2   /* used after a flush */
+#define C_DYING       0x4   /* from venus (which died) */
+#define C_PURGE       0x8
+
+int coda_cnode_make(struct inode **, struct CodaFid *, struct super_block *);
+struct inode *coda_iget(struct super_block *sb, struct CodaFid *fid, struct coda_vattr *attr);
+int coda_cnode_makectl(struct inode **inode, struct super_block *sb);
+struct inode *coda_fid_to_inode(struct CodaFid *fid, struct super_block *sb);
+void coda_replace_fid(struct inode *, struct CodaFid *, struct CodaFid *);
+
+#endif
+#endif
diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h
new file mode 100644
index 000000000000..cc621ec409d8
--- /dev/null
+++ b/include/linux/coda_linux.h
@@ -0,0 +1,102 @@
+/* 
+ * Coda File System, Linux Kernel module
+ * 
+ * Original version, adapted from cfs_mach.c, (C) Carnegie Mellon University
+ * Linux modifications (C) 1996, Peter J. Braam
+ * Rewritten for Linux 2.1 (C) 1997 Carnegie Mellon University
+ *
+ * Carnegie Mellon University encourages users of this software to
+ * contribute improvements to the Coda project.
+ */
+
+#ifndef _LINUX_CODA_FS
+#define _LINUX_CODA_FS
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/wait.h>		
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/coda_fs_i.h>
+
+/* operations */
+extern struct inode_operations coda_dir_inode_operations;
+extern struct inode_operations coda_file_inode_operations;
+extern struct inode_operations coda_ioctl_inode_operations;
+
+extern struct address_space_operations coda_file_aops;
+extern struct address_space_operations coda_symlink_aops;
+
+extern struct file_operations coda_dir_operations;
+extern struct file_operations coda_file_operations;
+extern struct file_operations coda_ioctl_operations;
+
+/* operations shared over more than one file */
+int coda_open(struct inode *i, struct file *f);
+int coda_flush(struct file *f);
+int coda_release(struct inode *i, struct file *f);
+int coda_permission(struct inode *inode, int mask, struct nameidata *nd);
+int coda_revalidate_inode(struct dentry *);
+int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+int coda_setattr(struct dentry *, struct iattr *);
+
+/* global variables */
+extern int coda_fake_statfs;
+
+/* this file:  heloers */
+static __inline__ struct CodaFid *coda_i2f(struct inode *);
+static __inline__ char *coda_i2s(struct inode *);
+static __inline__ void coda_flag_inode(struct inode *, int flag);
+char *coda_f2s(struct CodaFid *f);
+int coda_isroot(struct inode *i);
+int coda_iscontrol(const char *name, size_t length);
+
+void coda_vattr_to_iattr(struct inode *, struct coda_vattr *);
+void coda_iattr_to_vattr(struct iattr *, struct coda_vattr *);
+unsigned short coda_flags_to_cflags(unsigned short);
+
+/* sysctl.h */
+void coda_sysctl_init(void);
+void coda_sysctl_clean(void);
+
+#define CODA_ALLOC(ptr, cast, size) do { \
+    if (size < PAGE_SIZE) \
+        ptr = (cast)kmalloc((unsigned long) size, GFP_KERNEL); \
+    else \
+        ptr = (cast)vmalloc((unsigned long) size); \
+    if (!ptr) \
+        printk("kernel malloc returns 0 at %s:%d\n", __FILE__, __LINE__); \
+    else memset( ptr, 0, size ); \
+} while (0)
+
+
+#define CODA_FREE(ptr,size) \
+    do { if (size < PAGE_SIZE) kfree((ptr)); else vfree((ptr)); } while (0)
+
+/* inode to cnode access functions */
+
+static inline struct coda_inode_info *ITOC(struct inode *inode)
+{
+	return list_entry(inode, struct coda_inode_info, vfs_inode);
+}
+
+static __inline__ struct CodaFid *coda_i2f(struct inode *inode)
+{
+	return &(ITOC(inode)->c_fid);
+}
+
+static __inline__ char *coda_i2s(struct inode *inode)
+{
+	return coda_f2s(&(ITOC(inode)->c_fid));
+}
+
+/* this will not zap the inode away */
+static __inline__ void coda_flag_inode(struct inode *inode, int flag)
+{
+	ITOC(inode)->c_flags |= flag;
+}		
+
+#endif
diff --git a/include/linux/coda_proc.h b/include/linux/coda_proc.h
new file mode 100644
index 000000000000..0dc1b0458e75
--- /dev/null
+++ b/include/linux/coda_proc.h
@@ -0,0 +1,76 @@
+/*
+ * coda_statis.h
+ * 
+ * CODA operation statistics
+ *
+ * (c) March, 1998
+ * by Michihiro Kuramochi, Zhenyu Xia and Zhanyong Wan
+ * zhanyong.wan@yale.edu
+ *
+ */
+
+#ifndef _CODA_PROC_H
+#define _CODA_PROC_H
+
+void coda_sysctl_init(void);
+void coda_sysctl_clean(void);
+
+#include <linux/sysctl.h>
+#include <linux/coda_fs_i.h>
+#include <linux/coda.h>
+
+/* these four files are presented to show the result of the statistics:
+ *
+ *	/proc/fs/coda/vfs_stats
+ *		      cache_inv_stats
+ *
+ * these four files are presented to reset the statistics to 0:
+ *
+ *	/proc/sys/coda/vfs_stats
+ *		       cache_inv_stats
+ */
+
+/* VFS operation statistics */
+struct coda_vfs_stats 
+{
+	/* file operations */
+	int open;
+	int flush;
+	int release;
+	int fsync;
+
+	/* dir operations */
+	int readdir;
+  
+	/* inode operations */
+	int create;
+	int lookup;
+	int link;
+	int unlink;
+	int symlink;
+	int mkdir;
+	int rmdir;
+	int rename;
+	int permission;
+
+	/* symlink operatoins*/
+	int follow_link;
+	int readlink;
+};
+
+/* cache invalidation statistics */
+struct coda_cache_inv_stats
+{
+	int flush;
+	int purge_user;
+	int zap_dir;
+	int zap_file;
+	int zap_vnode;
+	int purge_fid;
+	int replace;
+};
+
+/* these global variables hold the actual statistics data */
+extern struct coda_vfs_stats		coda_vfs_stat;
+
+#endif /* _CODA_PROC_H */
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
new file mode 100644
index 000000000000..d539262a8f89
--- /dev/null
+++ b/include/linux/coda_psdev.h
@@ -0,0 +1,103 @@
+#ifndef __CODA_PSDEV_H
+#define __CODA_PSDEV_H
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS  5	   /* how many do we allow */
+
+#define CODA_SUPER_MAGIC	0x73757245
+
+struct kstatfs;
+
+struct coda_sb_info
+{
+	struct venus_comm *sbi_vcomm;
+};
+
+/* communication pending/processing queues */
+struct venus_comm {
+	u_long		    vc_seq;
+	wait_queue_head_t   vc_waitq; /* Venus wait queue */
+	struct list_head    vc_pending;
+	struct list_head    vc_processing;
+	int                 vc_inuse;
+	struct super_block *vc_sb;
+};
+
+
+static inline struct coda_sb_info *coda_sbp(struct super_block *sb)
+{
+    return ((struct coda_sb_info *)((sb)->s_fs_info));
+}
+
+
+/* upcalls */
+int venus_rootfid(struct super_block *sb, struct CodaFid *fidp);
+int venus_getattr(struct super_block *sb, struct CodaFid *fid,
+		  struct coda_vattr *attr);
+int venus_setattr(struct super_block *, struct CodaFid *, struct coda_vattr *);
+int venus_lookup(struct super_block *sb, struct CodaFid *fid, 
+		 const char *name, int length, int *type, 
+		 struct CodaFid *resfid);
+int venus_store(struct super_block *sb, struct CodaFid *fid, int flags,
+		vuid_t uid);
+int venus_release(struct super_block *sb, struct CodaFid *fid, int flags);
+int venus_close(struct super_block *sb, struct CodaFid *fid, int flags,
+		vuid_t uid);
+int venus_open(struct super_block *sb, struct CodaFid *fid, int flags,
+	       struct file **f);
+int venus_mkdir(struct super_block *sb, struct CodaFid *dirfid, 
+		const char *name, int length, 
+		struct CodaFid *newfid, struct coda_vattr *attrs);
+int venus_create(struct super_block *sb, struct CodaFid *dirfid, 
+		 const char *name, int length, int excl, int mode,
+		 struct CodaFid *newfid, struct coda_vattr *attrs) ;
+int venus_rmdir(struct super_block *sb, struct CodaFid *dirfid, 
+		const char *name, int length);
+int venus_remove(struct super_block *sb, struct CodaFid *dirfid, 
+		 const char *name, int length);
+int venus_readlink(struct super_block *sb, struct CodaFid *fid, 
+		   char *buffer, int *length);
+int venus_rename(struct super_block *, struct CodaFid *new_fid, 
+		 struct CodaFid *old_fid, size_t old_length, 
+		 size_t new_length, const char *old_name, 
+		 const char *new_name);
+int venus_link(struct super_block *sb, struct CodaFid *fid, 
+		  struct CodaFid *dirfid, const char *name, int len );
+int venus_symlink(struct super_block *sb, struct CodaFid *fid,
+		  const char *name, int len, const char *symname, int symlen);
+int venus_access(struct super_block *sb, struct CodaFid *fid, int mask);
+int venus_pioctl(struct super_block *sb, struct CodaFid *fid,
+		 unsigned int cmd, struct PioctlData *data);
+int coda_downcall(int opcode, union outputArgs *out, struct super_block *sb);
+int venus_fsync(struct super_block *sb, struct CodaFid *fid);
+int venus_statfs(struct super_block *sb, struct kstatfs *sfs);
+
+
+/* messages between coda filesystem in kernel and Venus */
+extern int coda_hard;
+extern unsigned long coda_timeout;
+struct upc_req {
+	struct list_head    uc_chain;
+	caddr_t	            uc_data;
+	u_short	            uc_flags;
+	u_short             uc_inSize;  /* Size is at most 5000 bytes */
+	u_short	            uc_outSize;
+	u_short	            uc_opcode;  /* copied from data to save lookup */
+	int		    uc_unique;
+	wait_queue_head_t   uc_sleep;   /* process' wait queue */
+	unsigned long       uc_posttime;
+};
+
+#define REQ_ASYNC  0x1
+#define REQ_READ   0x2
+#define REQ_WRITE  0x4
+#define REQ_ABORT  0x8
+
+
+/*
+ * Statistics
+ */
+
+extern struct venus_comm coda_comms[];
+
+#endif
diff --git a/include/linux/coff.h b/include/linux/coff.h
new file mode 100644
index 000000000000..6354a7fe22b2
--- /dev/null
+++ b/include/linux/coff.h
@@ -0,0 +1,351 @@
+/* This file is derived from the GAS 2.1.4 assembler control file.
+   The GAS product is under the GNU General Public License, version 2 or later.
+   As such, this file is also under that license.
+
+   If the file format changes in the COFF object, this file should be
+   subsequently updated to reflect the changes.
+
+   The actual loader module only uses a few of these structures. The full
+   set is documented here because I received the full set. If you wish
+   more information about COFF, then O'Reilly has a very excellent book.
+*/
+
+#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
+#define  E_FILNMLEN 14   /* Number of characters in a file name           */
+#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */
+
+/*
+ * These defines are byte order independent. There is no alignment of fields
+ * permitted in the structures. Therefore they are declared as characters
+ * and the values loaded from the character positions. It also makes it
+ * nice to have it "endian" independent.
+ */
+ 
+/* Load a short int from the following tables with little-endian formats */
+#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
+				  ((unsigned short)((unsigned char)ps[0]))))
+
+/* Load a long int from the following tables with little-endian formats */
+#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
+				 ((unsigned long)((unsigned char)ps[2])<<16) |\
+				 ((unsigned long)((unsigned char)ps[1])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[0])))))
+ 
+/* Load a short int from the following tables with big-endian formats */
+#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
+				  ((unsigned short)((unsigned char)ps[1]))))
+
+/* Load a long int from the following tables with big-endian formats */
+#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
+				 ((unsigned long)((unsigned char)ps[1])<<16) |\
+				 ((unsigned long)((unsigned char)ps[2])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[3])))))
+
+/* These may be overridden later by brain dead implementations which generate
+   a big-endian header with little-endian data. In that case, generate a
+   replacement macro which tests a flag and uses either of the two above
+   as appropriate. */
+
+#define COFF_LONG(v)   COFF_LONG_L(v)
+#define COFF_SHORT(v)  COFF_SHORT_L(v)
+
+/*** coff information for Intel 386/486.  */
+
+/********************** FILE HEADER **********************/
+
+struct COFF_filehdr {
+	char f_magic[2];	/* magic number			*/
+	char f_nscns[2];	/* number of sections		*/
+	char f_timdat[4];	/* time & date stamp		*/
+	char f_symptr[4];	/* file pointer to symtab	*/
+	char f_nsyms[4];	/* number of symtab entries	*/
+	char f_opthdr[2];	/* sizeof(optional hdr)		*/
+	char f_flags[2];	/* flags			*/
+};
+
+/*
+ *   Bits for f_flags:
+ *
+ *	F_RELFLG	relocation info stripped from file
+ *	F_EXEC		file is executable  (i.e. no unresolved external
+ *			references)
+ *	F_LNNO		line numbers stripped from file
+ *	F_LSYMS		local symbols stripped from file
+ *	F_MINMAL	this is a minimal object file (".m") output of fextract
+ *	F_UPDATE	this is a fully bound update file, output of ogen
+ *	F_SWABD		this file has had its bytes swabbed (in names)
+ *	F_AR16WR	this file has the byte ordering of an AR16WR
+ *			(e.g. 11/70) machine
+ *	F_AR32WR	this file has the byte ordering of an AR32WR machine
+ *			(e.g. vax and iNTEL 386)
+ *	F_AR32W		this file has the byte ordering of an AR32W machine
+ *			(e.g. 3b,maxi)
+ *	F_PATCH		file contains "patch" list in optional header
+ *	F_NODF		(minimal file only) no decision functions for
+ *			replaced functions
+ */
+
+#define  COFF_F_RELFLG		0000001
+#define  COFF_F_EXEC		0000002
+#define  COFF_F_LNNO		0000004
+#define  COFF_F_LSYMS		0000010
+#define  COFF_F_MINMAL		0000020
+#define  COFF_F_UPDATE		0000040
+#define  COFF_F_SWABD		0000100
+#define  COFF_F_AR16WR		0000200
+#define  COFF_F_AR32WR		0000400
+#define  COFF_F_AR32W		0001000
+#define  COFF_F_PATCH		0002000
+#define  COFF_F_NODF		0002000
+
+#define	COFF_I386MAGIC	        0x14c   /* Linux's system    */
+
+#if 0   /* Perhaps, someday, these formats may be used.      */
+#define COFF_I386PTXMAGIC	0x154
+#define COFF_I386AIXMAGIC	0x175   /* IBM's AIX system  */
+#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
+			  && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
+			  && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
+#else
+#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
+#endif
+
+#define	COFF_FILHDR	struct COFF_filehdr
+#define	COFF_FILHSZ	sizeof(COFF_FILHDR)
+
+/********************** AOUT "OPTIONAL HEADER" **********************/
+
+/* Linux COFF must have this "optional" header. Standard COFF has no entry
+   location for the "entry" point. They normally would start with the first
+   location of the .text section. This is not a good idea for linux. So,
+   the use of this "optional" header is not optional. It is required.
+
+   Do not be tempted to assume that the size of the optional header is
+   a constant and simply index the next byte by the size of this structure.
+   Use the 'f_opthdr' field in the main coff header for the size of the
+   structure actually written to the file!!
+*/
+
+typedef struct 
+{
+  char 	magic[2];		/* type of file				 */
+  char	vstamp[2];		/* version stamp			 */
+  char	tsize[4];		/* text size in bytes, padded to FW bdry */
+  char	dsize[4];		/* initialized   data "   "		 */
+  char	bsize[4];		/* uninitialized data "   "		 */
+  char	entry[4];		/* entry pt.				 */
+  char 	text_start[4];		/* base of text used for this file       */
+  char 	data_start[4];		/* base of data used for this file       */
+}
+COFF_AOUTHDR;
+
+#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
+
+#define COFF_STMAGIC	0401
+#define COFF_OMAGIC     0404
+#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
+#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
+#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
+#define COFF_SHMAGIC	0443	/* shared library header                   */
+
+/********************** SECTION HEADER **********************/
+
+struct COFF_scnhdr {
+  char		s_name[8];	/* section name			    */
+  char		s_paddr[4];	/* physical address, aliased s_nlib */
+  char		s_vaddr[4];	/* virtual address		    */
+  char		s_size[4];	/* section size			    */
+  char		s_scnptr[4];	/* file ptr to raw data for section */
+  char		s_relptr[4];	/* file ptr to relocation	    */
+  char		s_lnnoptr[4];	/* file ptr to line numbers	    */
+  char		s_nreloc[2];	/* number of relocation entries	    */
+  char		s_nlnno[2];	/* number of line number entries    */
+  char		s_flags[4];	/* flags			    */
+};
+
+#define	COFF_SCNHDR	struct COFF_scnhdr
+#define	COFF_SCNHSZ	sizeof(COFF_SCNHDR)
+
+/*
+ * names of "special" sections
+ */
+
+#define COFF_TEXT	".text"
+#define COFF_DATA	".data"
+#define COFF_BSS	".bss"
+#define COFF_COMMENT    ".comment"
+#define COFF_LIB        ".lib"
+
+#define COFF_SECT_TEXT  0      /* Section for instruction code             */
+#define COFF_SECT_DATA  1      /* Section for initialized globals          */
+#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
+#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */
+
+#define COFF_STYP_REG     0x00 /* regular segment                          */
+#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
+#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
+#define COFF_STYP_GROUP   0x04 /* group segment                            */
+#define COFF_STYP_PAD     0x08 /* .pad segment                             */
+#define COFF_STYP_COPY    0x10 /* copy section                             */
+#define COFF_STYP_TEXT    0x20 /* .text segment                            */
+#define COFF_STYP_DATA    0x40 /* .data segment                            */
+#define COFF_STYP_BSS     0x80 /* .bss segment                             */
+#define COFF_STYP_INFO   0x200 /* .comment section                         */
+#define COFF_STYP_OVER   0x400 /* overlay section                          */
+#define COFF_STYP_LIB    0x800 /* library section                          */
+
+/*
+ * Shared libraries have the following section header in the data field for
+ * each library.
+ */
+
+struct COFF_slib {
+  char		sl_entsz[4];	/* Size of this entry               */
+  char		sl_pathndx[4];	/* size of the header field         */
+};
+
+#define	COFF_SLIBHD	struct COFF_slib
+#define	COFF_SLIBSZ	sizeof(COFF_SLIBHD)
+
+/********************** LINE NUMBERS **********************/
+
+/* 1 line number entry for every "breakpointable" source line in a section.
+ * Line numbers are grouped on a per function basis; first entry in a function
+ * grouping will have l_lnno = 0 and in place of physical address will be the
+ * symbol table index of the function name.
+ */
+
+struct COFF_lineno {
+  union {
+    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
+    char l_paddr[4];	/* (physical) address of line number	*/
+  } l_addr;
+  char l_lnno[2];	/* line number		*/
+};
+
+#define	COFF_LINENO	struct COFF_lineno
+#define	COFF_LINESZ	6
+
+/********************** SYMBOLS **********************/
+
+#define COFF_E_SYMNMLEN	 8	/* # characters in a short symbol name	*/
+#define COFF_E_FILNMLEN	14	/* # characters in a file name		*/
+#define COFF_E_DIMNUM	 4	/* # array dimensions in auxiliary entry */
+
+/*
+ *  All symbols and sections have the following definition
+ */
+
+struct COFF_syment 
+{
+  union {
+    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
+    struct {
+      char e_zeroes[4];         /* Leading zeros */
+      char e_offset[4];         /* Offset if this is a header section */
+    } e;
+  } e;
+
+  char e_value[4];              /* Value (address) of the segment */
+  char e_scnum[2];              /* Section number */
+  char e_type[2];               /* Type of section */
+  char e_sclass[1];             /* Loader class */
+  char e_numaux[1];             /* Number of auxiliary entries which follow */
+};
+
+#define COFF_N_BTMASK	(0xf)   /* Mask for important class bits */
+#define COFF_N_TMASK	(0x30)  /* Mask for important type bits  */
+#define COFF_N_BTSHFT	(4)     /* # bits to shift class field   */
+#define COFF_N_TSHIFT	(2)     /* # bits to shift type field    */
+
+/*
+ *  Auxiliary entries because the main table is too limiting.
+ */
+  
+union COFF_auxent {
+
+/*
+ *  Debugger information
+ */
+
+  struct {
+    char x_tagndx[4];	        /* str, un, or enum tag indx */
+    union {
+      struct {
+	char  x_lnno[2];        /* declaration line number */
+	char  x_size[2];        /* str/union/array size */
+      } x_lnsz;
+      char x_fsize[4];	        /* size of function */
+    } x_misc;
+
+    union {
+      struct {		        /* if ISFCN, tag, or .bb */
+	char x_lnnoptr[4];	/* ptr to fcn line # */
+	char x_endndx[4];	/* entry ndx past block end */
+      } x_fcn;
+
+      struct {		        /* if ISARY, up to 4 dimen. */
+	char x_dimen[E_DIMNUM][2];
+      } x_ary;
+    } x_fcnary;
+
+    char x_tvndx[2];	/* tv index */
+  } x_sym;
+
+/*
+ *   Source file names (debugger information)
+ */
+
+  union {
+    char x_fname[E_FILNMLEN];
+    struct {
+      char x_zeroes[4];
+      char x_offset[4];
+    } x_n;
+  } x_file;
+
+/*
+ *   Section information
+ */
+
+  struct {
+    char x_scnlen[4];	/* section length */
+    char x_nreloc[2];	/* # relocation entries */
+    char x_nlinno[2];	/* # line numbers */
+  } x_scn;
+
+/*
+ *   Transfer vector (branch table)
+ */
+  
+  struct {
+    char x_tvfill[4];	/* tv fill value */
+    char x_tvlen[2];	/* length of .tv */
+    char x_tvran[2][2];	/* tv range */
+  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
+};
+
+#define	COFF_SYMENT	struct COFF_syment
+#define	COFF_SYMESZ	18	
+#define	COFF_AUXENT	union COFF_auxent
+#define	COFF_AUXESZ	18
+
+#define COFF_ETEXT	"etext"
+
+/********************** RELOCATION DIRECTIVES **********************/
+
+struct COFF_reloc {
+  char r_vaddr[4];        /* Virtual address of item    */
+  char r_symndx[4];       /* Symbol index in the symtab */
+  char r_type[2];         /* Relocation type            */
+};
+
+#define COFF_RELOC struct COFF_reloc
+#define COFF_RELSZ 10
+
+#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
+#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
+#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4
+
+/* For new sections we haven't heard of before */
+#define COFF_DEF_SECTION_ALIGNMENT       4
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
new file mode 100644
index 000000000000..ac6d9a43e085
--- /dev/null
+++ b/include/linux/com20020.h
@@ -0,0 +1,115 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support - function declarations
+ * 
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#ifndef __COM20020_H
+#define __COM20020_H
+
+int com20020_check(struct net_device *dev);
+int com20020_found(struct net_device *dev, int shared);
+
+/* The number of low I/O ports used by the card. */
+#define ARCNET_TOTAL_SIZE 8
+
+/* various register addresses */
+#ifdef CONFIG_SA1100_CT6001
+#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
+#else
+#define BUS_ALIGN  1
+#endif
+
+
+#define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
+#define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
+#define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
+#define _DIAGSTAT (ioaddr+BUS_ALIGN*1)	/* diagnostic status register */
+#define _ADDR_HI  (ioaddr+BUS_ALIGN*2)	/* control registers for IO-mapped memory */
+#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
+#define _MEMDATA  (ioaddr+BUS_ALIGN*4)	/* data port for IO-mapped memory */
+#define _SUBADR   (ioaddr+BUS_ALIGN*5)	/* the extended port _XREG refers to */
+#define _CONFIG   (ioaddr+BUS_ALIGN*6)	/* configuration register */
+#define _XREG     (ioaddr+BUS_ALIGN*7)	/* extra registers (indexed by _CONFIG
+  					or _SUBADR) */
+
+/* in the ADDR_HI register */
+#define RDDATAflag	0x80	/* next access is a read (not a write) */
+
+/* in the DIAGSTAT register */
+#define NEWNXTIDflag	0x02	/* ID to which token is passed has changed */
+
+/* in the CONFIG register */
+#define RESETcfg	0x80	/* put card in reset state */
+#define TXENcfg		0x20	/* enable TX */
+
+/* in SETUP register */
+#define PROMISCset	0x10	/* enable RCV_ALL */
+#define P1MODE		0x80    /* enable P1-MODE for Backplane */
+#define SLOWARB		0x01    /* enable Slow Arbitration for >=5Mbps */
+
+/* COM2002x */
+#define SUB_TENTATIVE	0	/* tentative node ID */
+#define SUB_NODE	1	/* node ID */
+#define SUB_SETUP1	2	/* various options */
+#define SUB_TEST	3	/* test/diag register */
+
+/* COM20022 only */
+#define SUB_SETUP2	4	/* sundry options */
+#define SUB_BUSCTL	5	/* bus control options */
+#define SUB_DMACOUNT	6	/* DMA count options */
+
+#define SET_SUBADR(x) do { \
+	if ((x) < 4) \
+	{ \
+		lp->config = (lp->config & ~0x03) | (x); \
+		SETCONF; \
+	} \
+	else \
+	{ \
+		outb(x, _SUBADR); \
+	} \
+} while (0)
+
+#undef ARCRESET
+#undef ASTATUS
+#undef ACOMMAND
+#undef AINTMASK
+
+#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
+		    udelay(5);                        \
+		    outb(lp->config , _CONFIG);       \
+                  }
+#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
+		    udelay(5);                       \
+		    outb(0x18 , _CONFIG);            \
+                  }
+
+#define ASTATUS()	inb(_STATUS)
+#define ADIAGSTATUS()	inb(_DIAGSTAT)
+#define ACOMMAND(cmd)	outb((cmd),_COMMAND)
+#define AINTMASK(msk)	outb((msk),_INTMASK)
+
+#define SETCONF		outb(lp->config, _CONFIG)
+
+#endif /* __COM20020_H */
diff --git a/include/linux/compat.h b/include/linux/compat.h
new file mode 100644
index 000000000000..b58b7d6f2fdb
--- /dev/null
+++ b/include/linux/compat.h
@@ -0,0 +1,162 @@
+#ifndef _LINUX_COMPAT_H
+#define _LINUX_COMPAT_H
+/*
+ * These are the type definitions for the architecture specific
+ * syscall compatibility layer.
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_COMPAT
+
+#include <linux/stat.h>
+#include <linux/param.h>	/* for HZ */
+#include <linux/sem.h>
+
+#include <asm/compat.h>
+#include <asm/siginfo.h>
+
+#define compat_jiffies_to_clock_t(x)	\
+		(((unsigned long)(x) * COMPAT_USER_HZ) / HZ)
+
+struct rusage;
+
+struct compat_itimerspec { 
+	struct compat_timespec it_interval;
+	struct compat_timespec it_value;
+};
+
+struct compat_utimbuf {
+	compat_time_t		actime;
+	compat_time_t		modtime;
+};
+
+struct compat_itimerval {
+	struct compat_timeval	it_interval;
+	struct compat_timeval	it_value;
+};
+
+struct compat_tms {
+	compat_clock_t		tms_utime;
+	compat_clock_t		tms_stime;
+	compat_clock_t		tms_cutime;
+	compat_clock_t		tms_cstime;
+};
+
+#define _COMPAT_NSIG_WORDS	(_COMPAT_NSIG / _COMPAT_NSIG_BPW)
+
+typedef struct {
+	compat_sigset_word	sig[_COMPAT_NSIG_WORDS];
+} compat_sigset_t;
+
+extern int cp_compat_stat(struct kstat *, struct compat_stat __user *);
+extern int get_compat_timespec(struct timespec *, const struct compat_timespec __user *);
+extern int put_compat_timespec(const struct timespec *, struct compat_timespec __user *);
+
+struct compat_iovec {
+	compat_uptr_t	iov_base;
+	compat_size_t	iov_len;
+};
+
+struct compat_rlimit {
+	compat_ulong_t	rlim_cur;
+	compat_ulong_t	rlim_max;
+};
+
+struct compat_rusage {
+	struct compat_timeval ru_utime;
+	struct compat_timeval ru_stime;
+	compat_long_t	ru_maxrss;
+	compat_long_t	ru_ixrss;
+	compat_long_t	ru_idrss;
+	compat_long_t	ru_isrss;
+	compat_long_t	ru_minflt;
+	compat_long_t	ru_majflt;
+	compat_long_t	ru_nswap;
+	compat_long_t	ru_inblock;
+	compat_long_t	ru_oublock;
+	compat_long_t	ru_msgsnd;
+	compat_long_t	ru_msgrcv;
+	compat_long_t	ru_nsignals;
+	compat_long_t	ru_nvcsw;
+	compat_long_t	ru_nivcsw;
+};
+
+extern int put_compat_rusage(const struct rusage *, struct compat_rusage __user *);
+
+struct compat_siginfo;
+
+extern asmlinkage long compat_sys_waitid(int, compat_pid_t,
+		struct compat_siginfo __user *, int,
+		struct compat_rusage __user *);
+
+struct compat_dirent {
+	u32		d_ino;
+	compat_off_t	d_off;
+	u16		d_reclen;
+	char		d_name[256];
+};
+
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define COMPAT_SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_sigevent {
+	compat_sigval_t sigev_value;
+	compat_int_t sigev_signo;
+	compat_int_t sigev_notify;
+	union {
+		compat_int_t _pad[COMPAT_SIGEV_PAD_SIZE];
+		compat_int_t _tid;
+
+		struct {
+			compat_uptr_t _function;
+			compat_uptr_t _attribute;
+		} _sigev_thread;
+	} _sigev_un;
+} compat_sigevent_t;
+
+
+long compat_sys_semctl(int first, int second, int third, void __user *uptr);
+long compat_sys_msgsnd(int first, int second, int third, void __user *uptr);
+long compat_sys_msgrcv(int first, int second, int msgtyp, int third,
+		int version, void __user *uptr);
+long compat_sys_msgctl(int first, int second, void __user *uptr);
+long compat_sys_shmat(int first, int second, compat_uptr_t third, int version,
+		void __user *uptr);
+long compat_sys_shmctl(int first, int second, void __user *uptr);
+long compat_sys_semtimedop(int semid, struct sembuf __user *tsems,
+		unsigned nsems, const struct compat_timespec __user *timeout);
+asmlinkage long compat_sys_keyctl(u32 option,
+			      u32 arg2, u32 arg3, u32 arg4, u32 arg5);
+
+asmlinkage ssize_t compat_sys_readv(unsigned long fd,
+		const struct compat_iovec __user *vec, unsigned long vlen);
+asmlinkage ssize_t compat_sys_writev(unsigned long fd,
+		const struct compat_iovec __user *vec, unsigned long vlen);
+
+int compat_do_execve(char * filename, compat_uptr_t __user *argv,
+	        compat_uptr_t __user *envp, struct pt_regs * regs);
+
+asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
+		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
+		struct compat_timeval __user *tvp);
+
+#define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
+
+#define BITS_TO_COMPAT_LONGS(bits) \
+	(((bits)+BITS_PER_COMPAT_LONG-1)/BITS_PER_COMPAT_LONG)
+
+long compat_get_bitmap(unsigned long *mask, compat_ulong_t __user *umask,
+		       unsigned long bitmap_size);
+long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
+		       unsigned long bitmap_size);
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from);
+int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from);
+int get_compat_sigevent(struct sigevent *event,
+		const struct compat_sigevent __user *u_event);
+
+#endif /* CONFIG_COMPAT */
+#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h
new file mode 100644
index 000000000000..70a4ebb5d964
--- /dev/null
+++ b/include/linux/compat_ioctl.h
@@ -0,0 +1,771 @@
+/* List here explicitly which ioctl's are known to have
+ * compatible types passed or none at all... Please include
+ * only stuff that is compatible on *all architectures*.
+ */
+#ifndef COMPATIBLE_IOCTL /* pointer to compatible structure or no argument */
+#define COMPATIBLE_IOCTL(cmd)  HANDLE_IOCTL((cmd),(ioctl_trans_handler_t)sys_ioctl)
+#endif
+
+#ifndef ULONG_IOCTL /* argument is an unsigned long integer, not a pointer */
+#define ULONG_IOCTL(cmd)  HANDLE_IOCTL((cmd),(ioctl_trans_handler_t)sys_ioctl)
+#endif
+
+/* Big T */
+COMPATIBLE_IOCTL(TCGETA)
+COMPATIBLE_IOCTL(TCSETA)
+COMPATIBLE_IOCTL(TCSETAW)
+COMPATIBLE_IOCTL(TCSETAF)
+COMPATIBLE_IOCTL(TCSBRK)
+ULONG_IOCTL(TCSBRKP)
+COMPATIBLE_IOCTL(TCXONC)
+COMPATIBLE_IOCTL(TCFLSH)
+COMPATIBLE_IOCTL(TCGETS)
+COMPATIBLE_IOCTL(TCSETS)
+COMPATIBLE_IOCTL(TCSETSW)
+COMPATIBLE_IOCTL(TCSETSF)
+COMPATIBLE_IOCTL(TIOCLINUX)
+COMPATIBLE_IOCTL(TIOCSBRK)
+COMPATIBLE_IOCTL(TIOCCBRK)
+ULONG_IOCTL(TIOCMIWAIT)
+COMPATIBLE_IOCTL(TIOCGICOUNT)
+/* Little t */
+COMPATIBLE_IOCTL(TIOCGETD)
+COMPATIBLE_IOCTL(TIOCSETD)
+COMPATIBLE_IOCTL(TIOCEXCL)
+COMPATIBLE_IOCTL(TIOCNXCL)
+COMPATIBLE_IOCTL(TIOCCONS)
+COMPATIBLE_IOCTL(TIOCGSOFTCAR)
+COMPATIBLE_IOCTL(TIOCSSOFTCAR)
+COMPATIBLE_IOCTL(TIOCSWINSZ)
+COMPATIBLE_IOCTL(TIOCGWINSZ)
+COMPATIBLE_IOCTL(TIOCMGET)
+COMPATIBLE_IOCTL(TIOCMBIC)
+COMPATIBLE_IOCTL(TIOCMBIS)
+COMPATIBLE_IOCTL(TIOCMSET)
+COMPATIBLE_IOCTL(TIOCPKT)
+COMPATIBLE_IOCTL(TIOCNOTTY)
+COMPATIBLE_IOCTL(TIOCSTI)
+COMPATIBLE_IOCTL(TIOCOUTQ)
+COMPATIBLE_IOCTL(TIOCSPGRP)
+COMPATIBLE_IOCTL(TIOCGPGRP)
+ULONG_IOCTL(TIOCSCTTY)
+COMPATIBLE_IOCTL(TIOCGPTN)
+COMPATIBLE_IOCTL(TIOCSPTLCK)
+COMPATIBLE_IOCTL(TIOCSERGETLSR)
+/* Big F */
+COMPATIBLE_IOCTL(FBIOBLANK)
+COMPATIBLE_IOCTL(FBIOGET_VSCREENINFO)
+COMPATIBLE_IOCTL(FBIOPUT_VSCREENINFO)
+COMPATIBLE_IOCTL(FBIOPAN_DISPLAY)
+COMPATIBLE_IOCTL(FBIOGET_CON2FBMAP)
+COMPATIBLE_IOCTL(FBIOPUT_CON2FBMAP)
+/* Little f */
+COMPATIBLE_IOCTL(FIOCLEX)
+COMPATIBLE_IOCTL(FIONCLEX)
+COMPATIBLE_IOCTL(FIOASYNC)
+COMPATIBLE_IOCTL(FIONBIO)
+COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
+/* 0x00 */
+COMPATIBLE_IOCTL(FIBMAP)
+COMPATIBLE_IOCTL(FIGETBSZ)
+/* 0x03 -- HD/IDE ioctl's used by hdparm and friends.
+ *         Some need translations, these do not.
+ */
+COMPATIBLE_IOCTL(HDIO_GET_IDENTITY)
+COMPATIBLE_IOCTL(HDIO_SET_DMA)
+COMPATIBLE_IOCTL(HDIO_SET_UNMASKINTR)
+COMPATIBLE_IOCTL(HDIO_SET_NOWERR)
+COMPATIBLE_IOCTL(HDIO_SET_32BIT)
+COMPATIBLE_IOCTL(HDIO_SET_MULTCOUNT)
+COMPATIBLE_IOCTL(HDIO_DRIVE_CMD)
+COMPATIBLE_IOCTL(HDIO_DRIVE_TASK)
+COMPATIBLE_IOCTL(HDIO_SET_PIO_MODE)
+COMPATIBLE_IOCTL(HDIO_SET_NICE)
+/* 0x02 -- Floppy ioctls */
+COMPATIBLE_IOCTL(FDMSGON)
+COMPATIBLE_IOCTL(FDMSGOFF)
+COMPATIBLE_IOCTL(FDSETEMSGTRESH)
+COMPATIBLE_IOCTL(FDFLUSH)
+COMPATIBLE_IOCTL(FDWERRORCLR)
+COMPATIBLE_IOCTL(FDSETMAXERRS)
+COMPATIBLE_IOCTL(FDGETMAXERRS)
+COMPATIBLE_IOCTL(FDGETDRVTYP)
+COMPATIBLE_IOCTL(FDEJECT)
+COMPATIBLE_IOCTL(FDCLRPRM)
+COMPATIBLE_IOCTL(FDFMTBEG)
+COMPATIBLE_IOCTL(FDFMTEND)
+COMPATIBLE_IOCTL(FDRESET)
+COMPATIBLE_IOCTL(FDTWADDLE)
+COMPATIBLE_IOCTL(FDFMTTRK)
+COMPATIBLE_IOCTL(FDRAWCMD)
+/* 0x12 */
+COMPATIBLE_IOCTL(BLKROSET)
+COMPATIBLE_IOCTL(BLKROGET)
+COMPATIBLE_IOCTL(BLKRRPART)
+COMPATIBLE_IOCTL(BLKFLSBUF)
+COMPATIBLE_IOCTL(BLKSECTSET)
+COMPATIBLE_IOCTL(BLKSSZGET)
+ULONG_IOCTL(BLKRASET)
+ULONG_IOCTL(BLKFRASET)
+/* RAID */
+COMPATIBLE_IOCTL(RAID_VERSION)
+COMPATIBLE_IOCTL(GET_ARRAY_INFO)
+COMPATIBLE_IOCTL(GET_DISK_INFO)
+COMPATIBLE_IOCTL(PRINT_RAID_DEBUG)
+COMPATIBLE_IOCTL(RAID_AUTORUN)
+COMPATIBLE_IOCTL(CLEAR_ARRAY)
+COMPATIBLE_IOCTL(ADD_NEW_DISK)
+ULONG_IOCTL(HOT_REMOVE_DISK)
+COMPATIBLE_IOCTL(SET_ARRAY_INFO)
+COMPATIBLE_IOCTL(SET_DISK_INFO)
+COMPATIBLE_IOCTL(WRITE_RAID_INFO)
+COMPATIBLE_IOCTL(UNPROTECT_ARRAY)
+COMPATIBLE_IOCTL(PROTECT_ARRAY)
+ULONG_IOCTL(HOT_ADD_DISK)
+ULONG_IOCTL(SET_DISK_FAULTY)
+COMPATIBLE_IOCTL(RUN_ARRAY)
+ULONG_IOCTL(START_ARRAY)
+COMPATIBLE_IOCTL(STOP_ARRAY)
+COMPATIBLE_IOCTL(STOP_ARRAY_RO)
+COMPATIBLE_IOCTL(RESTART_ARRAY_RW)
+/* DM */
+COMPATIBLE_IOCTL(DM_VERSION_32)
+COMPATIBLE_IOCTL(DM_REMOVE_ALL_32)
+COMPATIBLE_IOCTL(DM_LIST_DEVICES_32)
+COMPATIBLE_IOCTL(DM_DEV_CREATE_32)
+COMPATIBLE_IOCTL(DM_DEV_REMOVE_32)
+COMPATIBLE_IOCTL(DM_DEV_RENAME_32)
+COMPATIBLE_IOCTL(DM_DEV_SUSPEND_32)
+COMPATIBLE_IOCTL(DM_DEV_STATUS_32)
+COMPATIBLE_IOCTL(DM_DEV_WAIT_32)
+COMPATIBLE_IOCTL(DM_TABLE_LOAD_32)
+COMPATIBLE_IOCTL(DM_TABLE_CLEAR_32)
+COMPATIBLE_IOCTL(DM_TABLE_DEPS_32)
+COMPATIBLE_IOCTL(DM_TABLE_STATUS_32)
+COMPATIBLE_IOCTL(DM_LIST_VERSIONS_32)
+COMPATIBLE_IOCTL(DM_TARGET_MSG_32)
+COMPATIBLE_IOCTL(DM_VERSION)
+COMPATIBLE_IOCTL(DM_REMOVE_ALL)
+COMPATIBLE_IOCTL(DM_LIST_DEVICES)
+COMPATIBLE_IOCTL(DM_DEV_CREATE)
+COMPATIBLE_IOCTL(DM_DEV_REMOVE)
+COMPATIBLE_IOCTL(DM_DEV_RENAME)
+COMPATIBLE_IOCTL(DM_DEV_SUSPEND)
+COMPATIBLE_IOCTL(DM_DEV_STATUS)
+COMPATIBLE_IOCTL(DM_DEV_WAIT)
+COMPATIBLE_IOCTL(DM_TABLE_LOAD)
+COMPATIBLE_IOCTL(DM_TABLE_CLEAR)
+COMPATIBLE_IOCTL(DM_TABLE_DEPS)
+COMPATIBLE_IOCTL(DM_TABLE_STATUS)
+COMPATIBLE_IOCTL(DM_LIST_VERSIONS)
+COMPATIBLE_IOCTL(DM_TARGET_MSG)
+/* Big K */
+COMPATIBLE_IOCTL(PIO_FONT)
+COMPATIBLE_IOCTL(GIO_FONT)
+ULONG_IOCTL(KDSIGACCEPT)
+COMPATIBLE_IOCTL(KDGETKEYCODE)
+COMPATIBLE_IOCTL(KDSETKEYCODE)
+ULONG_IOCTL(KIOCSOUND)
+ULONG_IOCTL(KDMKTONE)
+COMPATIBLE_IOCTL(KDGKBTYPE)
+ULONG_IOCTL(KDSETMODE)
+COMPATIBLE_IOCTL(KDGETMODE)
+ULONG_IOCTL(KDSKBMODE)
+COMPATIBLE_IOCTL(KDGKBMODE)
+ULONG_IOCTL(KDSKBMETA)
+COMPATIBLE_IOCTL(KDGKBMETA)
+COMPATIBLE_IOCTL(KDGKBENT)
+COMPATIBLE_IOCTL(KDSKBENT)
+COMPATIBLE_IOCTL(KDGKBSENT)
+COMPATIBLE_IOCTL(KDSKBSENT)
+COMPATIBLE_IOCTL(KDGKBDIACR)
+COMPATIBLE_IOCTL(KDSKBDIACR)
+COMPATIBLE_IOCTL(KDKBDREP)
+COMPATIBLE_IOCTL(KDGKBLED)
+ULONG_IOCTL(KDSKBLED)
+COMPATIBLE_IOCTL(KDGETLED)
+ULONG_IOCTL(KDSETLED)
+COMPATIBLE_IOCTL(GIO_SCRNMAP)
+COMPATIBLE_IOCTL(PIO_SCRNMAP)
+COMPATIBLE_IOCTL(GIO_UNISCRNMAP)
+COMPATIBLE_IOCTL(PIO_UNISCRNMAP)
+COMPATIBLE_IOCTL(PIO_FONTRESET)
+COMPATIBLE_IOCTL(PIO_UNIMAPCLR)
+/* Big S */
+COMPATIBLE_IOCTL(SCSI_IOCTL_GET_IDLUN)
+COMPATIBLE_IOCTL(SCSI_IOCTL_DOORLOCK)
+COMPATIBLE_IOCTL(SCSI_IOCTL_DOORUNLOCK)
+COMPATIBLE_IOCTL(SCSI_IOCTL_TEST_UNIT_READY)
+COMPATIBLE_IOCTL(SCSI_IOCTL_GET_BUS_NUMBER)
+COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND)
+COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
+COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
+/* Big T */
+COMPATIBLE_IOCTL(TUNSETNOCSUM)
+COMPATIBLE_IOCTL(TUNSETDEBUG)
+COMPATIBLE_IOCTL(TUNSETPERSIST)
+COMPATIBLE_IOCTL(TUNSETOWNER)
+/* Big V */
+COMPATIBLE_IOCTL(VT_SETMODE)
+COMPATIBLE_IOCTL(VT_GETMODE)
+COMPATIBLE_IOCTL(VT_GETSTATE)
+COMPATIBLE_IOCTL(VT_OPENQRY)
+ULONG_IOCTL(VT_ACTIVATE)
+ULONG_IOCTL(VT_WAITACTIVE)
+ULONG_IOCTL(VT_RELDISP)
+ULONG_IOCTL(VT_DISALLOCATE)
+COMPATIBLE_IOCTL(VT_RESIZE)
+COMPATIBLE_IOCTL(VT_RESIZEX)
+COMPATIBLE_IOCTL(VT_LOCKSWITCH)
+COMPATIBLE_IOCTL(VT_UNLOCKSWITCH)
+/* Little v */
+/* Little v, the video4linux ioctls (conflict?) */
+COMPATIBLE_IOCTL(VIDIOCGCAP)
+COMPATIBLE_IOCTL(VIDIOCGCHAN)
+COMPATIBLE_IOCTL(VIDIOCSCHAN)
+COMPATIBLE_IOCTL(VIDIOCGPICT)
+COMPATIBLE_IOCTL(VIDIOCSPICT)
+COMPATIBLE_IOCTL(VIDIOCCAPTURE)
+COMPATIBLE_IOCTL(VIDIOCKEY)
+COMPATIBLE_IOCTL(VIDIOCGAUDIO)
+COMPATIBLE_IOCTL(VIDIOCSAUDIO)
+COMPATIBLE_IOCTL(VIDIOCSYNC)
+COMPATIBLE_IOCTL(VIDIOCMCAPTURE)
+COMPATIBLE_IOCTL(VIDIOCGMBUF)
+COMPATIBLE_IOCTL(VIDIOCGUNIT)
+COMPATIBLE_IOCTL(VIDIOCGCAPTURE)
+COMPATIBLE_IOCTL(VIDIOCSCAPTURE)
+/* BTTV specific... */
+COMPATIBLE_IOCTL(_IOW('v',  BASE_VIDIOCPRIVATE+0, char [256]))
+COMPATIBLE_IOCTL(_IOR('v',  BASE_VIDIOCPRIVATE+1, char [256]))
+COMPATIBLE_IOCTL(_IOR('v' , BASE_VIDIOCPRIVATE+2, unsigned int))
+COMPATIBLE_IOCTL(_IOW('v' , BASE_VIDIOCPRIVATE+3, char [16])) /* struct bttv_pll_info */
+COMPATIBLE_IOCTL(_IOR('v' , BASE_VIDIOCPRIVATE+4, int))
+COMPATIBLE_IOCTL(_IOR('v' , BASE_VIDIOCPRIVATE+5, int))
+COMPATIBLE_IOCTL(_IOR('v' , BASE_VIDIOCPRIVATE+6, int))
+COMPATIBLE_IOCTL(_IOR('v' , BASE_VIDIOCPRIVATE+7, int))
+/* Little p (/dev/rtc, /dev/envctrl, etc.) */
+COMPATIBLE_IOCTL(RTC_AIE_ON)
+COMPATIBLE_IOCTL(RTC_AIE_OFF)
+COMPATIBLE_IOCTL(RTC_UIE_ON)
+COMPATIBLE_IOCTL(RTC_UIE_OFF)
+COMPATIBLE_IOCTL(RTC_PIE_ON)
+COMPATIBLE_IOCTL(RTC_PIE_OFF)
+COMPATIBLE_IOCTL(RTC_WIE_ON)
+COMPATIBLE_IOCTL(RTC_WIE_OFF)
+COMPATIBLE_IOCTL(RTC_ALM_SET)
+COMPATIBLE_IOCTL(RTC_ALM_READ)
+COMPATIBLE_IOCTL(RTC_RD_TIME)
+COMPATIBLE_IOCTL(RTC_SET_TIME)
+COMPATIBLE_IOCTL(RTC_WKALM_SET)
+COMPATIBLE_IOCTL(RTC_WKALM_RD)
+/* Little m */
+COMPATIBLE_IOCTL(MTIOCTOP)
+/* Socket level stuff */
+COMPATIBLE_IOCTL(FIOSETOWN)
+COMPATIBLE_IOCTL(SIOCSPGRP)
+COMPATIBLE_IOCTL(FIOGETOWN)
+COMPATIBLE_IOCTL(SIOCGPGRP)
+COMPATIBLE_IOCTL(SIOCATMARK)
+COMPATIBLE_IOCTL(SIOCSIFLINK)
+COMPATIBLE_IOCTL(SIOCSIFENCAP)
+COMPATIBLE_IOCTL(SIOCGIFENCAP)
+COMPATIBLE_IOCTL(SIOCSIFNAME)
+COMPATIBLE_IOCTL(SIOCSARP)
+COMPATIBLE_IOCTL(SIOCGARP)
+COMPATIBLE_IOCTL(SIOCDARP)
+COMPATIBLE_IOCTL(SIOCSRARP)
+COMPATIBLE_IOCTL(SIOCGRARP)
+COMPATIBLE_IOCTL(SIOCDRARP)
+COMPATIBLE_IOCTL(SIOCADDDLCI)
+COMPATIBLE_IOCTL(SIOCDELDLCI)
+COMPATIBLE_IOCTL(SIOCGMIIPHY)
+COMPATIBLE_IOCTL(SIOCGMIIREG)
+COMPATIBLE_IOCTL(SIOCSMIIREG)
+COMPATIBLE_IOCTL(SIOCGIFVLAN)
+COMPATIBLE_IOCTL(SIOCSIFVLAN)
+COMPATIBLE_IOCTL(SIOCBRADDBR)
+COMPATIBLE_IOCTL(SIOCBRDELBR)
+/* SG stuff */
+COMPATIBLE_IOCTL(SG_SET_TIMEOUT)
+COMPATIBLE_IOCTL(SG_GET_TIMEOUT)
+COMPATIBLE_IOCTL(SG_EMULATED_HOST)
+ULONG_IOCTL(SG_SET_TRANSFORM)
+COMPATIBLE_IOCTL(SG_GET_TRANSFORM)
+COMPATIBLE_IOCTL(SG_SET_RESERVED_SIZE)
+COMPATIBLE_IOCTL(SG_GET_RESERVED_SIZE)
+COMPATIBLE_IOCTL(SG_GET_SCSI_ID)
+COMPATIBLE_IOCTL(SG_SET_FORCE_LOW_DMA)
+COMPATIBLE_IOCTL(SG_GET_LOW_DMA)
+COMPATIBLE_IOCTL(SG_SET_FORCE_PACK_ID)
+COMPATIBLE_IOCTL(SG_GET_PACK_ID)
+COMPATIBLE_IOCTL(SG_GET_NUM_WAITING)
+COMPATIBLE_IOCTL(SG_SET_DEBUG)
+COMPATIBLE_IOCTL(SG_GET_SG_TABLESIZE)
+COMPATIBLE_IOCTL(SG_GET_COMMAND_Q)
+COMPATIBLE_IOCTL(SG_SET_COMMAND_Q)
+COMPATIBLE_IOCTL(SG_GET_VERSION_NUM)
+COMPATIBLE_IOCTL(SG_NEXT_CMD_LEN)
+COMPATIBLE_IOCTL(SG_SCSI_RESET)
+COMPATIBLE_IOCTL(SG_GET_REQUEST_TABLE)
+COMPATIBLE_IOCTL(SG_SET_KEEP_ORPHAN)
+COMPATIBLE_IOCTL(SG_GET_KEEP_ORPHAN)
+/* PPP stuff */
+COMPATIBLE_IOCTL(PPPIOCGFLAGS)
+COMPATIBLE_IOCTL(PPPIOCSFLAGS)
+COMPATIBLE_IOCTL(PPPIOCGASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCSASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCGUNIT)
+COMPATIBLE_IOCTL(PPPIOCGRASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCSRASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCGMRU)
+COMPATIBLE_IOCTL(PPPIOCSMRU)
+COMPATIBLE_IOCTL(PPPIOCSMAXCID)
+COMPATIBLE_IOCTL(PPPIOCGXASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCSXASYNCMAP)
+COMPATIBLE_IOCTL(PPPIOCXFERUNIT)
+/* PPPIOCSCOMPRESS is translated */
+COMPATIBLE_IOCTL(PPPIOCGNPMODE)
+COMPATIBLE_IOCTL(PPPIOCSNPMODE)
+COMPATIBLE_IOCTL(PPPIOCGDEBUG)
+COMPATIBLE_IOCTL(PPPIOCSDEBUG)
+/* PPPIOCSPASS is translated */
+/* PPPIOCSACTIVE is translated */
+/* PPPIOCGIDLE is translated */
+COMPATIBLE_IOCTL(PPPIOCNEWUNIT)
+COMPATIBLE_IOCTL(PPPIOCATTACH)
+COMPATIBLE_IOCTL(PPPIOCDETACH)
+COMPATIBLE_IOCTL(PPPIOCSMRRU)
+COMPATIBLE_IOCTL(PPPIOCCONNECT)
+COMPATIBLE_IOCTL(PPPIOCDISCONN)
+COMPATIBLE_IOCTL(PPPIOCATTCHAN)
+COMPATIBLE_IOCTL(PPPIOCGCHAN)
+/* PPPOX */
+COMPATIBLE_IOCTL(PPPOEIOCSFWD)
+COMPATIBLE_IOCTL(PPPOEIOCDFWD)
+/* LP */
+COMPATIBLE_IOCTL(LPGETSTATUS)
+/* ppdev */
+COMPATIBLE_IOCTL(PPCLAIM)
+COMPATIBLE_IOCTL(PPRELEASE)
+COMPATIBLE_IOCTL(PPEXCL)
+COMPATIBLE_IOCTL(PPYIELD)
+/* CDROM stuff */
+COMPATIBLE_IOCTL(CDROMPAUSE)
+COMPATIBLE_IOCTL(CDROMRESUME)
+COMPATIBLE_IOCTL(CDROMPLAYMSF)
+COMPATIBLE_IOCTL(CDROMPLAYTRKIND)
+COMPATIBLE_IOCTL(CDROMREADTOCHDR)
+COMPATIBLE_IOCTL(CDROMREADTOCENTRY)
+COMPATIBLE_IOCTL(CDROMSTOP)
+COMPATIBLE_IOCTL(CDROMSTART)
+COMPATIBLE_IOCTL(CDROMEJECT)
+COMPATIBLE_IOCTL(CDROMVOLCTRL)
+COMPATIBLE_IOCTL(CDROMSUBCHNL)
+ULONG_IOCTL(CDROMEJECT_SW)
+COMPATIBLE_IOCTL(CDROMMULTISESSION)
+COMPATIBLE_IOCTL(CDROM_GET_MCN)
+COMPATIBLE_IOCTL(CDROMRESET)
+COMPATIBLE_IOCTL(CDROMVOLREAD)
+COMPATIBLE_IOCTL(CDROMSEEK)
+COMPATIBLE_IOCTL(CDROMPLAYBLK)
+COMPATIBLE_IOCTL(CDROMCLOSETRAY)
+ULONG_IOCTL(CDROM_SET_OPTIONS)
+ULONG_IOCTL(CDROM_CLEAR_OPTIONS)
+ULONG_IOCTL(CDROM_SELECT_SPEED)
+ULONG_IOCTL(CDROM_SELECT_DISC)
+ULONG_IOCTL(CDROM_MEDIA_CHANGED)
+ULONG_IOCTL(CDROM_DRIVE_STATUS)
+COMPATIBLE_IOCTL(CDROM_DISC_STATUS)
+COMPATIBLE_IOCTL(CDROM_CHANGER_NSLOTS)
+ULONG_IOCTL(CDROM_LOCKDOOR)
+ULONG_IOCTL(CDROM_DEBUG)
+COMPATIBLE_IOCTL(CDROM_GET_CAPABILITY)
+/* Ignore cdrom.h about these next 5 ioctls, they absolutely do
+ * not take a struct cdrom_read, instead they take a struct cdrom_msf
+ * which is compatible.
+ */
+COMPATIBLE_IOCTL(CDROMREADMODE2)
+COMPATIBLE_IOCTL(CDROMREADMODE1)
+COMPATIBLE_IOCTL(CDROMREADRAW)
+COMPATIBLE_IOCTL(CDROMREADCOOKED)
+COMPATIBLE_IOCTL(CDROMREADALL)
+/* DVD ioctls */
+COMPATIBLE_IOCTL(DVD_READ_STRUCT)
+COMPATIBLE_IOCTL(DVD_WRITE_STRUCT)
+COMPATIBLE_IOCTL(DVD_AUTH)
+/* pktcdvd */
+COMPATIBLE_IOCTL(PACKET_CTRL_CMD)
+/* Big L */
+ULONG_IOCTL(LOOP_SET_FD)
+ULONG_IOCTL(LOOP_CHANGE_FD)
+COMPATIBLE_IOCTL(LOOP_CLR_FD)
+COMPATIBLE_IOCTL(LOOP_GET_STATUS64)
+COMPATIBLE_IOCTL(LOOP_SET_STATUS64)
+/* Big A */
+/* sparc only */
+/* Big Q for sound/OSS */
+COMPATIBLE_IOCTL(SNDCTL_SEQ_RESET)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_SYNC)
+COMPATIBLE_IOCTL(SNDCTL_SYNTH_INFO)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_CTRLRATE)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_GETOUTCOUNT)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_GETINCOUNT)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_PERCMODE)
+COMPATIBLE_IOCTL(SNDCTL_FM_LOAD_INSTR)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_TESTMIDI)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_RESETSAMPLES)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_NRSYNTHS)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_NRMIDIS)
+COMPATIBLE_IOCTL(SNDCTL_MIDI_INFO)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_THRESHOLD)
+COMPATIBLE_IOCTL(SNDCTL_SYNTH_MEMAVL)
+COMPATIBLE_IOCTL(SNDCTL_FM_4OP_ENABLE)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_PANIC)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_OUTOFBAND)
+COMPATIBLE_IOCTL(SNDCTL_SEQ_GETTIME)
+COMPATIBLE_IOCTL(SNDCTL_SYNTH_ID)
+COMPATIBLE_IOCTL(SNDCTL_SYNTH_CONTROL)
+COMPATIBLE_IOCTL(SNDCTL_SYNTH_REMOVESAMPLE)
+/* Big T for sound/OSS */
+COMPATIBLE_IOCTL(SNDCTL_TMR_TIMEBASE)
+COMPATIBLE_IOCTL(SNDCTL_TMR_START)
+COMPATIBLE_IOCTL(SNDCTL_TMR_STOP)
+COMPATIBLE_IOCTL(SNDCTL_TMR_CONTINUE)
+COMPATIBLE_IOCTL(SNDCTL_TMR_TEMPO)
+COMPATIBLE_IOCTL(SNDCTL_TMR_SOURCE)
+COMPATIBLE_IOCTL(SNDCTL_TMR_METRONOME)
+COMPATIBLE_IOCTL(SNDCTL_TMR_SELECT)
+/* Little m for sound/OSS */
+COMPATIBLE_IOCTL(SNDCTL_MIDI_PRETIME)
+COMPATIBLE_IOCTL(SNDCTL_MIDI_MPUMODE)
+COMPATIBLE_IOCTL(SNDCTL_MIDI_MPUCMD)
+/* Big P for sound/OSS */
+COMPATIBLE_IOCTL(SNDCTL_DSP_RESET)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SYNC)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SPEED)
+COMPATIBLE_IOCTL(SNDCTL_DSP_STEREO)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETBLKSIZE)
+COMPATIBLE_IOCTL(SNDCTL_DSP_CHANNELS)
+COMPATIBLE_IOCTL(SOUND_PCM_WRITE_FILTER)
+COMPATIBLE_IOCTL(SNDCTL_DSP_POST)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SUBDIVIDE)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SETFRAGMENT)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETFMTS)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SETFMT)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETOSPACE)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETISPACE)
+COMPATIBLE_IOCTL(SNDCTL_DSP_NONBLOCK)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETCAPS)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETTRIGGER)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SETTRIGGER)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETIPTR)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETOPTR)
+/* SNDCTL_DSP_MAPINBUF,  XXX needs translation */
+/* SNDCTL_DSP_MAPOUTBUF,  XXX needs translation */
+COMPATIBLE_IOCTL(SNDCTL_DSP_SETSYNCRO)
+COMPATIBLE_IOCTL(SNDCTL_DSP_SETDUPLEX)
+COMPATIBLE_IOCTL(SNDCTL_DSP_GETODELAY)
+COMPATIBLE_IOCTL(SNDCTL_DSP_PROFILE)
+COMPATIBLE_IOCTL(SOUND_PCM_READ_RATE)
+COMPATIBLE_IOCTL(SOUND_PCM_READ_CHANNELS)
+COMPATIBLE_IOCTL(SOUND_PCM_READ_BITS)
+COMPATIBLE_IOCTL(SOUND_PCM_READ_FILTER)
+/* Big C for sound/OSS */
+COMPATIBLE_IOCTL(SNDCTL_COPR_RESET)
+COMPATIBLE_IOCTL(SNDCTL_COPR_LOAD)
+COMPATIBLE_IOCTL(SNDCTL_COPR_RDATA)
+COMPATIBLE_IOCTL(SNDCTL_COPR_RCODE)
+COMPATIBLE_IOCTL(SNDCTL_COPR_WDATA)
+COMPATIBLE_IOCTL(SNDCTL_COPR_WCODE)
+COMPATIBLE_IOCTL(SNDCTL_COPR_RUN)
+COMPATIBLE_IOCTL(SNDCTL_COPR_HALT)
+COMPATIBLE_IOCTL(SNDCTL_COPR_SENDMSG)
+COMPATIBLE_IOCTL(SNDCTL_COPR_RCVMSG)
+/* Big M for sound/OSS */
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_VOLUME)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_BASS)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_TREBLE)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_SYNTH)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_PCM)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_SPEAKER)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_LINE)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_MIC)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_CD)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_IMIX)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_ALTPCM)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_RECLEV)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_IGAIN)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_OGAIN)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_LINE1)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_LINE2)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_LINE3)
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_DIGITAL1))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_DIGITAL2))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_DIGITAL3))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_PHONEIN))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_PHONEOUT))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_VIDEO))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_RADIO))
+COMPATIBLE_IOCTL(MIXER_READ(SOUND_MIXER_MONITOR))
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_MUTE)
+/* SOUND_MIXER_READ_ENHANCE,  same value as READ_MUTE */
+/* SOUND_MIXER_READ_LOUD,  same value as READ_MUTE */
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_RECSRC)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_DEVMASK)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_RECMASK)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_STEREODEVS)
+COMPATIBLE_IOCTL(SOUND_MIXER_READ_CAPS)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_VOLUME)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_BASS)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_TREBLE)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_SYNTH)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_PCM)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_SPEAKER)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_LINE)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_MIC)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_CD)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_IMIX)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_ALTPCM)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_RECLEV)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_IGAIN)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_OGAIN)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_LINE1)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_LINE2)
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_LINE3)
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_DIGITAL1))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_DIGITAL2))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_DIGITAL3))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_PHONEIN))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_PHONEOUT))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_VIDEO))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_RADIO))
+COMPATIBLE_IOCTL(MIXER_WRITE(SOUND_MIXER_MONITOR))
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_MUTE)
+/* SOUND_MIXER_WRITE_ENHANCE,  same value as WRITE_MUTE */
+/* SOUND_MIXER_WRITE_LOUD,  same value as WRITE_MUTE */
+COMPATIBLE_IOCTL(SOUND_MIXER_WRITE_RECSRC)
+COMPATIBLE_IOCTL(SOUND_MIXER_INFO)
+COMPATIBLE_IOCTL(SOUND_OLD_MIXER_INFO)
+COMPATIBLE_IOCTL(SOUND_MIXER_ACCESS)
+COMPATIBLE_IOCTL(SOUND_MIXER_AGC)
+COMPATIBLE_IOCTL(SOUND_MIXER_3DSE)
+COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE1)
+COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE2)
+COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE3)
+COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE4)
+COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE5)
+COMPATIBLE_IOCTL(SOUND_MIXER_GETLEVELS)
+COMPATIBLE_IOCTL(SOUND_MIXER_SETLEVELS)
+COMPATIBLE_IOCTL(OSS_GETVERSION)
+/* AUTOFS */
+ULONG_IOCTL(AUTOFS_IOC_READY)
+ULONG_IOCTL(AUTOFS_IOC_FAIL)
+COMPATIBLE_IOCTL(AUTOFS_IOC_CATATONIC)
+COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOVER)
+COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE)
+COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI)
+COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOSUBVER)
+COMPATIBLE_IOCTL(AUTOFS_IOC_ASKREGHOST)
+COMPATIBLE_IOCTL(AUTOFS_IOC_TOGGLEREGHOST)
+COMPATIBLE_IOCTL(AUTOFS_IOC_ASKUMOUNT)
+/* DEVFS */
+COMPATIBLE_IOCTL(DEVFSDIOC_GET_PROTO_REV)
+COMPATIBLE_IOCTL(DEVFSDIOC_SET_EVENT_MASK)
+COMPATIBLE_IOCTL(DEVFSDIOC_RELEASE_EVENT_QUEUE)
+COMPATIBLE_IOCTL(DEVFSDIOC_SET_DEBUG_MASK)
+/* Raw devices */
+COMPATIBLE_IOCTL(RAW_SETBIND)
+COMPATIBLE_IOCTL(RAW_GETBIND)
+/* SMB ioctls which do not need any translations */
+COMPATIBLE_IOCTL(SMB_IOC_NEWCONN)
+/* NCP ioctls which do not need any translations */
+COMPATIBLE_IOCTL(NCP_IOC_CONN_LOGGED_IN)
+COMPATIBLE_IOCTL(NCP_IOC_SIGN_INIT)
+COMPATIBLE_IOCTL(NCP_IOC_SIGN_WANTED)
+COMPATIBLE_IOCTL(NCP_IOC_SET_SIGN_WANTED)
+COMPATIBLE_IOCTL(NCP_IOC_LOCKUNLOCK)
+COMPATIBLE_IOCTL(NCP_IOC_GETROOT)
+COMPATIBLE_IOCTL(NCP_IOC_SETROOT)
+COMPATIBLE_IOCTL(NCP_IOC_GETCHARSETS)
+COMPATIBLE_IOCTL(NCP_IOC_SETCHARSETS)
+COMPATIBLE_IOCTL(NCP_IOC_GETDENTRYTTL)
+COMPATIBLE_IOCTL(NCP_IOC_SETDENTRYTTL)
+/* Little a */
+COMPATIBLE_IOCTL(ATMSIGD_CTRL)
+COMPATIBLE_IOCTL(ATMARPD_CTRL)
+COMPATIBLE_IOCTL(ATMLEC_CTRL)
+COMPATIBLE_IOCTL(ATMLEC_MCAST)
+COMPATIBLE_IOCTL(ATMLEC_DATA)
+COMPATIBLE_IOCTL(ATM_SETSC)
+COMPATIBLE_IOCTL(SIOCSIFATMTCP)
+COMPATIBLE_IOCTL(SIOCMKCLIP)
+COMPATIBLE_IOCTL(ATMARP_MKIP)
+COMPATIBLE_IOCTL(ATMARP_SETENTRY)
+COMPATIBLE_IOCTL(ATMARP_ENCAP)
+COMPATIBLE_IOCTL(ATMTCP_CREATE)
+COMPATIBLE_IOCTL(ATMTCP_REMOVE)
+COMPATIBLE_IOCTL(ATMMPC_CTRL)
+COMPATIBLE_IOCTL(ATMMPC_DATA)
+/* Watchdog */
+COMPATIBLE_IOCTL(WDIOC_GETSUPPORT)
+COMPATIBLE_IOCTL(WDIOC_GETSTATUS)
+COMPATIBLE_IOCTL(WDIOC_GETBOOTSTATUS)
+COMPATIBLE_IOCTL(WDIOC_GETTEMP)
+COMPATIBLE_IOCTL(WDIOC_SETOPTIONS)
+COMPATIBLE_IOCTL(WDIOC_KEEPALIVE)
+COMPATIBLE_IOCTL(WDIOC_SETTIMEOUT)
+COMPATIBLE_IOCTL(WDIOC_GETTIMEOUT)
+/* Big R */
+COMPATIBLE_IOCTL(RNDGETENTCNT)
+COMPATIBLE_IOCTL(RNDADDTOENTCNT)
+COMPATIBLE_IOCTL(RNDGETPOOL)
+COMPATIBLE_IOCTL(RNDADDENTROPY)
+COMPATIBLE_IOCTL(RNDZAPENTCNT)
+COMPATIBLE_IOCTL(RNDCLEARPOOL)
+/* Bluetooth */
+COMPATIBLE_IOCTL(HCIDEVUP)
+COMPATIBLE_IOCTL(HCIDEVDOWN)
+COMPATIBLE_IOCTL(HCIDEVRESET)
+COMPATIBLE_IOCTL(HCIDEVRESTAT)
+COMPATIBLE_IOCTL(HCIGETDEVLIST)
+COMPATIBLE_IOCTL(HCIGETDEVINFO)
+COMPATIBLE_IOCTL(HCIGETCONNLIST)
+COMPATIBLE_IOCTL(HCIGETCONNINFO)
+COMPATIBLE_IOCTL(HCISETRAW)
+COMPATIBLE_IOCTL(HCISETSCAN)
+COMPATIBLE_IOCTL(HCISETAUTH)
+COMPATIBLE_IOCTL(HCISETENCRYPT)
+COMPATIBLE_IOCTL(HCISETPTYPE)
+COMPATIBLE_IOCTL(HCISETLINKPOL)
+COMPATIBLE_IOCTL(HCISETLINKMODE)
+COMPATIBLE_IOCTL(HCISETACLMTU)
+COMPATIBLE_IOCTL(HCISETSCOMTU)
+COMPATIBLE_IOCTL(HCIINQUIRY)
+COMPATIBLE_IOCTL(HCIUARTSETPROTO)
+COMPATIBLE_IOCTL(HCIUARTGETPROTO)
+COMPATIBLE_IOCTL(RFCOMMCREATEDEV)
+COMPATIBLE_IOCTL(RFCOMMRELEASEDEV)
+COMPATIBLE_IOCTL(RFCOMMGETDEVLIST)
+COMPATIBLE_IOCTL(RFCOMMGETDEVINFO)
+COMPATIBLE_IOCTL(RFCOMMSTEALDLC)
+COMPATIBLE_IOCTL(BNEPCONNADD)
+COMPATIBLE_IOCTL(BNEPCONNDEL)
+COMPATIBLE_IOCTL(BNEPGETCONNLIST)
+COMPATIBLE_IOCTL(BNEPGETCONNINFO)
+COMPATIBLE_IOCTL(CMTPCONNADD)
+COMPATIBLE_IOCTL(CMTPCONNDEL)
+COMPATIBLE_IOCTL(CMTPGETCONNLIST)
+COMPATIBLE_IOCTL(CMTPGETCONNINFO)
+COMPATIBLE_IOCTL(HIDPCONNADD)
+COMPATIBLE_IOCTL(HIDPCONNDEL)
+COMPATIBLE_IOCTL(HIDPGETCONNLIST)
+COMPATIBLE_IOCTL(HIDPGETCONNINFO)
+/* CAPI */
+COMPATIBLE_IOCTL(CAPI_REGISTER)
+COMPATIBLE_IOCTL(CAPI_GET_MANUFACTURER)
+COMPATIBLE_IOCTL(CAPI_GET_VERSION)
+COMPATIBLE_IOCTL(CAPI_GET_SERIAL)
+COMPATIBLE_IOCTL(CAPI_GET_PROFILE)
+COMPATIBLE_IOCTL(CAPI_MANUFACTURER_CMD)
+COMPATIBLE_IOCTL(CAPI_GET_ERRCODE)
+COMPATIBLE_IOCTL(CAPI_INSTALLED)
+COMPATIBLE_IOCTL(CAPI_GET_FLAGS)
+COMPATIBLE_IOCTL(CAPI_SET_FLAGS)
+COMPATIBLE_IOCTL(CAPI_CLR_FLAGS)
+COMPATIBLE_IOCTL(CAPI_NCCI_OPENCOUNT)
+COMPATIBLE_IOCTL(CAPI_NCCI_GETUNIT)
+/* Misc. */
+COMPATIBLE_IOCTL(0x41545900)		/* ATYIO_CLKR */
+COMPATIBLE_IOCTL(0x41545901)		/* ATYIO_CLKW */
+COMPATIBLE_IOCTL(PCIIOC_CONTROLLER)
+COMPATIBLE_IOCTL(PCIIOC_MMAP_IS_IO)
+COMPATIBLE_IOCTL(PCIIOC_MMAP_IS_MEM)
+COMPATIBLE_IOCTL(PCIIOC_WRITE_COMBINE)
+/* USB */
+COMPATIBLE_IOCTL(USBDEVFS_RESETEP)
+COMPATIBLE_IOCTL(USBDEVFS_SETINTERFACE)
+COMPATIBLE_IOCTL(USBDEVFS_SETCONFIGURATION)
+COMPATIBLE_IOCTL(USBDEVFS_GETDRIVER)
+COMPATIBLE_IOCTL(USBDEVFS_DISCARDURB)
+COMPATIBLE_IOCTL(USBDEVFS_CLAIMINTERFACE)
+COMPATIBLE_IOCTL(USBDEVFS_RELEASEINTERFACE)
+COMPATIBLE_IOCTL(USBDEVFS_CONNECTINFO)
+COMPATIBLE_IOCTL(USBDEVFS_HUB_PORTINFO)
+COMPATIBLE_IOCTL(USBDEVFS_RESET)
+COMPATIBLE_IOCTL(USBDEVFS_SUBMITURB32)
+COMPATIBLE_IOCTL(USBDEVFS_REAPURB32)
+COMPATIBLE_IOCTL(USBDEVFS_REAPURBNDELAY32)
+COMPATIBLE_IOCTL(USBDEVFS_CLEAR_HALT)
+/* MTD */
+COMPATIBLE_IOCTL(MEMGETINFO)
+COMPATIBLE_IOCTL(MEMERASE)
+COMPATIBLE_IOCTL(MEMLOCK)
+COMPATIBLE_IOCTL(MEMUNLOCK)
+COMPATIBLE_IOCTL(MEMGETREGIONCOUNT)
+COMPATIBLE_IOCTL(MEMGETREGIONINFO)
+/* NBD */
+ULONG_IOCTL(NBD_SET_SOCK)
+ULONG_IOCTL(NBD_SET_BLKSIZE)
+ULONG_IOCTL(NBD_SET_SIZE)
+COMPATIBLE_IOCTL(NBD_DO_IT)
+COMPATIBLE_IOCTL(NBD_CLEAR_SOCK)
+COMPATIBLE_IOCTL(NBD_CLEAR_QUE)
+COMPATIBLE_IOCTL(NBD_PRINT_DEBUG)
+ULONG_IOCTL(NBD_SET_SIZE_BLOCKS)
+COMPATIBLE_IOCTL(NBD_DISCONNECT)
+/* i2c */
+COMPATIBLE_IOCTL(I2C_SLAVE)
+COMPATIBLE_IOCTL(I2C_SLAVE_FORCE)
+COMPATIBLE_IOCTL(I2C_TENBIT)
+COMPATIBLE_IOCTL(I2C_PEC)
+COMPATIBLE_IOCTL(I2C_RETRIES)
+COMPATIBLE_IOCTL(I2C_TIMEOUT)
+/* wireless */
+COMPATIBLE_IOCTL(SIOCSIWCOMMIT)
+COMPATIBLE_IOCTL(SIOCGIWNAME)
+COMPATIBLE_IOCTL(SIOCSIWNWID)
+COMPATIBLE_IOCTL(SIOCGIWNWID)
+COMPATIBLE_IOCTL(SIOCSIWFREQ)
+COMPATIBLE_IOCTL(SIOCGIWFREQ)
+COMPATIBLE_IOCTL(SIOCSIWMODE)
+COMPATIBLE_IOCTL(SIOCGIWMODE)
+COMPATIBLE_IOCTL(SIOCSIWSENS)
+COMPATIBLE_IOCTL(SIOCGIWSENS)
+COMPATIBLE_IOCTL(SIOCSIWRANGE)
+COMPATIBLE_IOCTL(SIOCSIWPRIV)
+COMPATIBLE_IOCTL(SIOCGIWPRIV)
+COMPATIBLE_IOCTL(SIOCSIWSTATS)
+COMPATIBLE_IOCTL(SIOCGIWSTATS)
+COMPATIBLE_IOCTL(SIOCSIWAP)
+COMPATIBLE_IOCTL(SIOCGIWAP)
+COMPATIBLE_IOCTL(SIOCSIWSCAN)
+COMPATIBLE_IOCTL(SIOCSIWRATE)
+COMPATIBLE_IOCTL(SIOCGIWRATE)
+COMPATIBLE_IOCTL(SIOCSIWRTS)
+COMPATIBLE_IOCTL(SIOCGIWRTS)
+COMPATIBLE_IOCTL(SIOCSIWFRAG)
+COMPATIBLE_IOCTL(SIOCGIWFRAG)
+COMPATIBLE_IOCTL(SIOCSIWTXPOW)
+COMPATIBLE_IOCTL(SIOCGIWTXPOW)
+COMPATIBLE_IOCTL(SIOCSIWRETRY)
+COMPATIBLE_IOCTL(SIOCGIWRETRY)
+COMPATIBLE_IOCTL(SIOCSIWPOWER)
+COMPATIBLE_IOCTL(SIOCGIWPOWER)
+/* hiddev */
+COMPATIBLE_IOCTL(HIDIOCGVERSION)
+COMPATIBLE_IOCTL(HIDIOCAPPLICATION)
+COMPATIBLE_IOCTL(HIDIOCGDEVINFO)
+COMPATIBLE_IOCTL(HIDIOCGSTRING)
+COMPATIBLE_IOCTL(HIDIOCINITREPORT)
+COMPATIBLE_IOCTL(HIDIOCGREPORT)
+COMPATIBLE_IOCTL(HIDIOCSREPORT)
+COMPATIBLE_IOCTL(HIDIOCGREPORTINFO)
+COMPATIBLE_IOCTL(HIDIOCGFIELDINFO)
+COMPATIBLE_IOCTL(HIDIOCGUSAGE)
+COMPATIBLE_IOCTL(HIDIOCSUSAGE)
+COMPATIBLE_IOCTL(HIDIOCGUCODE)
+COMPATIBLE_IOCTL(HIDIOCGFLAG)
+COMPATIBLE_IOCTL(HIDIOCSFLAG)
+COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINDEX)
+COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINFO)
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
new file mode 100644
index 000000000000..152734055403
--- /dev/null
+++ b/include/linux/compiler-gcc.h
@@ -0,0 +1,17 @@
+/* Never include this file directly.  Include <linux/compiler.h> instead.  */
+
+/*
+ * Common definitions for all gcc versions go here.
+ */
+
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+/* This macro obfuscates arithmetic on a variable address so that gcc
+   shouldn't recognize the original var, and make assumptions about it */
+#define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+    __asm__ ("" : "=g"(__ptr) : "0"(ptr));		\
+    (typeof(ptr)) (__ptr + (off)); })
diff --git a/include/linux/compiler-gcc2.h b/include/linux/compiler-gcc2.h
new file mode 100644
index 000000000000..5a359153ffd9
--- /dev/null
+++ b/include/linux/compiler-gcc2.h
@@ -0,0 +1,24 @@
+/* Never include this file directly.  Include <linux/compiler.h> instead.  */
+
+/* These definitions are for GCC v2.x.  */
+
+/* Somewhere in the middle of the GCC 2.96 development cycle, we implemented
+   a mechanism by which the user can annotate likely branch directions and
+   expect the blocks to be reordered appropriately.  Define __builtin_expect
+   to nothing for earlier compilers.  */
+#include <linux/compiler-gcc.h>
+
+#if __GNUC_MINOR__ < 96
+# define __builtin_expect(x, expected_value) (x)
+#endif
+
+#define __attribute_used__	__attribute__((__unused__))
+
+/*
+ * The attribute `pure' is not implemented in GCC versions earlier
+ * than 2.96.
+ */
+#if __GNUC_MINOR__ >= 96
+# define __attribute_pure__	__attribute__((pure))
+# define __attribute_const__	__attribute__((__const__))
+#endif
diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
new file mode 100644
index 000000000000..a6fa615afab5
--- /dev/null
+++ b/include/linux/compiler-gcc3.h
@@ -0,0 +1,32 @@
+/* Never include this file directly.  Include <linux/compiler.h> instead.  */
+
+/* These definitions are for GCC v3.x.  */
+#include <linux/compiler-gcc.h>
+
+#if __GNUC_MINOR__ >= 1
+# define inline		inline		__attribute__((always_inline))
+# define __inline__	__inline__	__attribute__((always_inline))
+# define __inline	__inline	__attribute__((always_inline))
+#endif
+
+#if __GNUC_MINOR__ > 0
+# define __deprecated		__attribute__((deprecated))
+#endif
+
+#if __GNUC_MINOR__ >= 3
+# define __attribute_used__	__attribute__((__used__))
+#else
+# define __attribute_used__	__attribute__((__unused__))
+#endif
+
+#define __attribute_pure__	__attribute__((pure))
+#define __attribute_const__	__attribute__((__const__))
+
+#if __GNUC_MINOR__ >= 1
+#define  noinline		__attribute__((noinline))
+#endif
+
+#if __GNUC_MINOR__ >= 4
+#define __must_check		__attribute__((warn_unused_result))
+#endif
+
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
new file mode 100644
index 000000000000..53686c037a06
--- /dev/null
+++ b/include/linux/compiler-gcc4.h
@@ -0,0 +1,16 @@
+/* Never include this file directly.  Include <linux/compiler.h> instead.  */
+
+/* These definitions are for GCC v4.x.  */
+#include <linux/compiler-gcc.h>
+
+#define inline			inline		__attribute__((always_inline))
+#define __inline__		__inline__	__attribute__((always_inline))
+#define __inline		__inline	__attribute__((always_inline))
+#define __deprecated		__attribute__((deprecated))
+#define __attribute_used__	__attribute__((__used__))
+#define __attribute_pure__	__attribute__((pure))
+#define __attribute_const__	__attribute__((__const__))
+#define  noinline		__attribute__((noinline))
+#define __must_check 		__attribute__((warn_unused_result))
+#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
+
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
new file mode 100644
index 000000000000..1d1c3ceaff4e
--- /dev/null
+++ b/include/linux/compiler-intel.h
@@ -0,0 +1,24 @@
+/* Never include this file directly.  Include <linux/compiler.h> instead.  */
+
+#ifdef __ECC
+
+/* Some compiler specific definitions are overwritten here
+ * for Intel ECC compiler
+ */
+
+#include <asm/intrinsics.h>
+
+/* Intel ECC compiler doesn't support gcc specific asm stmts.
+ * It uses intrinsics to do the equivalent things.
+ */
+#undef barrier
+#undef RELOC_HIDE
+
+#define barrier() __memory_barrier()
+
+#define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+     __ptr = (unsigned long) (ptr);				\
+    (typeof(ptr)) (__ptr + (off)); })
+
+#endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
new file mode 100644
index 000000000000..487725cf0d0d
--- /dev/null
+++ b/include/linux/compiler.h
@@ -0,0 +1,152 @@
+#ifndef __LINUX_COMPILER_H
+#define __LINUX_COMPILER_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef __CHECKER__
+# define __user		__attribute__((noderef, address_space(1)))
+# define __kernel	/* default address space */
+# define __safe		__attribute__((safe))
+# define __force	__attribute__((force))
+# define __nocast	__attribute__((nocast))
+# define __iomem	__attribute__((noderef, address_space(2)))
+# define __acquires(x)	__attribute__((context(0,1)))
+# define __releases(x)	__attribute__((context(1,0)))
+# define __acquire(x)	__context__(1)
+# define __release(x)	__context__(-1)
+# define __cond_lock(x)	((x) ? ({ __context__(1); 1; }) : 0)
+extern void __chk_user_ptr(void __user *);
+extern void __chk_io_ptr(void __iomem *);
+#else
+# define __user
+# define __kernel
+# define __safe
+# define __force
+# define __nocast
+# define __iomem
+# define __chk_user_ptr(x) (void)0
+# define __chk_io_ptr(x) (void)0
+# define __builtin_warning(x, y...) (1)
+# define __acquires(x)
+# define __releases(x)
+# define __acquire(x) (void)0
+# define __release(x) (void)0
+# define __cond_lock(x) (x)
+#endif
+
+#ifdef __KERNEL__
+
+#if __GNUC__ > 4
+#error no compiler-gcc.h file for this gcc version
+#elif __GNUC__ == 4
+# include <linux/compiler-gcc4.h>
+#elif __GNUC__ == 3
+# include <linux/compiler-gcc3.h>
+#elif __GNUC__ == 2
+# include <linux/compiler-gcc2.h>
+#else
+# error Sorry, your compiler is too old/not recognized.
+#endif
+
+/* Intel compiler defines __GNUC__. So we will overwrite implementations
+ * coming from above header files here
+ */
+#ifdef __INTEL_COMPILER
+# include <linux/compiler-intel.h>
+#endif
+
+/*
+ * Generic compiler-dependent macros required for kernel
+ * build go below this comment. Actual compiler/compiler version
+ * specific implementations come from the above header files
+ */
+
+#define likely(x)	__builtin_expect(!!(x), 1)
+#define unlikely(x)	__builtin_expect(!!(x), 0)
+
+/* Optimization barrier */
+#ifndef barrier
+# define barrier() __memory_barrier()
+#endif
+
+#ifndef RELOC_HIDE
+# define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+     __ptr = (unsigned long) (ptr);				\
+    (typeof(ptr)) (__ptr + (off)); })
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Allow us to mark functions as 'deprecated' and have gcc emit a nice
+ * warning for each use, in hopes of speeding the functions removal.
+ * Usage is:
+ * 		int __deprecated foo(void)
+ */
+#ifndef __deprecated
+# define __deprecated		/* unimplemented */
+#endif
+
+#ifndef __must_check
+#define __must_check
+#endif
+
+/*
+ * Allow us to avoid 'defined but not used' warnings on functions and data,
+ * as well as force them to be emitted to the assembly file.
+ *
+ * As of gcc 3.3, static functions that are not marked with attribute((used))
+ * may be elided from the assembly file.  As of gcc 3.3, static data not so
+ * marked will not be elided, but this may change in a future gcc version.
+ *
+ * In prior versions of gcc, such functions and data would be emitted, but
+ * would be warned about except with attribute((unused)).
+ */
+#ifndef __attribute_used__
+# define __attribute_used__	/* unimplemented */
+#endif
+
+/*
+ * From the GCC manual:
+ *
+ * Many functions have no effects except the return value and their
+ * return value depends only on the parameters and/or global
+ * variables.  Such a function can be subject to common subexpression
+ * elimination and loop optimization just as an arithmetic operator
+ * would be.
+ * [...]
+ */
+#ifndef __attribute_pure__
+# define __attribute_pure__	/* unimplemented */
+#endif
+
+/*
+ * From the GCC manual:
+ *
+ * Many functions do not examine any values except their arguments,
+ * and have no effects except the return value.  Basically this is
+ * just slightly more strict class than the `pure' attribute above,
+ * since function is not allowed to read global memory.
+ *
+ * Note that a function that has pointer arguments and examines the
+ * data pointed to must _not_ be declared `const'.  Likewise, a
+ * function that calls a non-`const' function usually must not be
+ * `const'.  It does not make sense for a `const' function to return
+ * `void'.
+ */
+#ifndef __attribute_const__
+# define __attribute_const__	/* unimplemented */
+#endif
+
+#ifndef noinline
+#define noinline
+#endif
+
+#ifndef __always_inline
+#define __always_inline inline
+#endif
+
+#endif /* __LINUX_COMPILER_H */
diff --git a/include/linux/completion.h b/include/linux/completion.h
new file mode 100644
index 000000000000..90663ad217f9
--- /dev/null
+++ b/include/linux/completion.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_COMPLETION_H
+#define __LINUX_COMPLETION_H
+
+/*
+ * (C) Copyright 2001 Linus Torvalds
+ *
+ * Atomic wait-for-completion handler data structures.
+ * See kernel/sched.c for details.
+ */
+
+#include <linux/wait.h>
+
+struct completion {
+	unsigned int done;
+	wait_queue_head_t wait;
+};
+
+#define COMPLETION_INITIALIZER(work) \
+	{ 0, __WAIT_QUEUE_HEAD_INITIALIZER((work).wait) }
+
+#define DECLARE_COMPLETION(work) \
+	struct completion work = COMPLETION_INITIALIZER(work)
+
+static inline void init_completion(struct completion *x)
+{
+	x->done = 0;
+	init_waitqueue_head(&x->wait);
+}
+
+extern void FASTCALL(wait_for_completion(struct completion *));
+extern int FASTCALL(wait_for_completion_interruptible(struct completion *x));
+extern unsigned long FASTCALL(wait_for_completion_timeout(struct completion *x,
+						   unsigned long timeout));
+extern unsigned long FASTCALL(wait_for_completion_interruptible_timeout(
+			struct completion *x, unsigned long timeout));
+
+extern void FASTCALL(complete(struct completion *));
+extern void FASTCALL(complete_all(struct completion *));
+
+#define INIT_COMPLETION(x)	((x).done = 0)
+
+#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
new file mode 100644
index 000000000000..3f5ea8e8026d
--- /dev/null
+++ b/include/linux/comstats.h
@@ -0,0 +1,119 @@
+/*****************************************************************************/
+
+/*
+ *	comstats.h  -- Serial Port Stats.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_COMSTATS_H
+#define	_COMSTATS_H
+/*****************************************************************************/
+
+/*
+ *	Serial port stats structure. The structure itself is UART
+ *	independent, but some fields may be UART/driver specific (for
+ *	example state).
+ */
+
+typedef struct {
+	unsigned long	brd;
+	unsigned long	panel;
+	unsigned long	port;
+	unsigned long	hwid;
+	unsigned long	type;
+	unsigned long	txtotal;
+	unsigned long	rxtotal;
+	unsigned long	txbuffered;
+	unsigned long	rxbuffered;
+	unsigned long	rxoverrun;
+	unsigned long	rxparity;
+	unsigned long	rxframing;
+	unsigned long	rxlost;
+	unsigned long	txbreaks;
+	unsigned long	rxbreaks;
+	unsigned long	txxon;
+	unsigned long	txxoff;
+	unsigned long	rxxon;
+	unsigned long	rxxoff;
+	unsigned long	txctson;
+	unsigned long	txctsoff;
+	unsigned long	rxrtson;
+	unsigned long	rxrtsoff;
+	unsigned long	modem;
+	unsigned long	state;
+	unsigned long	flags;
+	unsigned long	ttystate;
+	unsigned long	cflags;
+	unsigned long	iflags;
+	unsigned long	oflags;
+	unsigned long	lflags;
+	unsigned long	signals;
+} comstats_t;
+
+
+/*
+ *	Board stats structure. Returns useful info about the board.
+ */
+
+#define	COM_MAXPANELS	8
+
+typedef struct {
+	unsigned long	panel;
+	unsigned long	type;
+	unsigned long	hwid;
+	unsigned long	nrports;
+} companel_t;
+
+typedef struct {
+	unsigned long	brd;
+	unsigned long	type;
+	unsigned long	hwid;
+	unsigned long	state;
+	unsigned long	ioaddr;
+	unsigned long	ioaddr2;
+	unsigned long	memaddr;
+	unsigned long	irq;
+	unsigned long	nrpanels;
+	unsigned long	nrports;
+	companel_t	panels[COM_MAXPANELS];
+} combrd_t;
+
+
+/*
+ *	Define the ioctl operations for stats stuff.
+ */
+#include <linux/ioctl.h>
+
+#define	COM_GETPORTSTATS	_IO('c',30)
+#define	COM_CLRPORTSTATS	_IO('c',31)
+#define	COM_GETBRDSTATS		_IO('c',32)
+
+
+/*
+ *	Define the set of ioctls that give user level access to the
+ *	private port, panel and board structures. The argument required
+ *	will be driver dependent!  
+ */
+#define	COM_READPORT		_IO('c',40)
+#define	COM_READBOARD		_IO('c',41)
+#define	COM_READPANEL		_IO('c',42)
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/concap.h b/include/linux/concap.h
new file mode 100644
index 000000000000..27304651d700
--- /dev/null
+++ b/include/linux/concap.h
@@ -0,0 +1,113 @@
+/* $Id: concap.h,v 1.3.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Copyright 1997 by Henner Eisen <eis@baty.hanse.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_CONCAP_H
+#define _LINUX_CONCAP_H
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+/* Stuff to support encapsulation protocols genericly. The encapsulation
+   protocol is processed at the uppermost layer of the network interface.
+
+   Based on a ideas developed in a 'synchronous device' thread in the
+   linux-x25 mailing list contributed by Alan Cox, Thomasz Motylewski
+   and Jonathan Naylor.
+
+   For more documetation on this refer to Documentation/isdn/README.concap
+*/
+
+struct concap_proto_ops;
+struct concap_device_ops;
+
+/* this manages all data needed by the encapsulation protocol
+ */
+struct concap_proto{
+	struct net_device *net_dev;	/* net device using our service  */
+	struct concap_device_ops *dops;	/* callbacks provided by device */
+ 	struct concap_proto_ops  *pops;	/* callbacks provided by us */
+ 	spinlock_t lock;
+	int flags;
+	void *proto_data;		/* protocol specific private data, to
+					   be accessed via *pops methods only*/
+	/*
+	  :
+	  whatever 
+	  :
+	  */
+};
+
+/* Operations to be supported by the net device. Called by the encapsulation
+ * protocol entity. No receive method is offered because the encapsulation
+ * protocol directly calls netif_rx().
+ */
+struct concap_device_ops{
+
+	/* to request data is submitted by device*/ 
+	int (*data_req)(struct concap_proto *, struct sk_buff *);
+
+	/* Control methods must be set to NULL by devices which do not
+	   support connection control.*/
+	/* to request a connection is set up */ 
+	int (*connect_req)(struct concap_proto *);
+
+	/* to request a connection is released */
+	int (*disconn_req)(struct concap_proto *);	
+};
+
+/* Operations to be supported by the encapsulation protocol. Called by
+ * device driver.
+ */
+struct concap_proto_ops{
+
+	/* create a new encapsulation protocol instance of same type */
+	struct concap_proto *  (*proto_new) (void);
+
+	/* delete encapsulation protocol instance and free all its resources.
+	   cprot may no loger be referenced after calling this */
+	void (*proto_del)(struct concap_proto *cprot);
+
+	/* initialize the protocol's data. To be called at interface startup
+	   or when the device driver resets the interface. All services of the
+	   encapsulation protocol may be used after this*/
+	int (*restart)(struct concap_proto *cprot, 
+		       struct net_device *ndev,
+		       struct concap_device_ops *dops);
+
+	/* inactivate an encapsulation protocol instance. The encapsulation
+	   protocol may not call any *dops methods after this. */
+	int (*close)(struct concap_proto *cprot);
+
+	/* process a frame handed down to us by upper layer */
+	int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called for each data entity received from lower layer*/ 
+	int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called when a connection was set up/down.
+	   Protocols that don't process these primitives might fill in
+	   dummy methods here */
+	int (*connect_ind)(struct concap_proto *cprot);
+	int (*disconn_ind)(struct concap_proto *cprot);
+  /*
+    Some network device support functions, like net_header(), rebuild_header(),
+    and others, that depend solely on the encapsulation protocol, might
+    be provided here, too. The net device would just fill them in its
+    corresponding fields when it is opened.
+    */
+};
+
+/* dummy restart/close/connect/reset/disconn methods
+ */
+extern int concap_nop(struct concap_proto *cprot); 
+
+/* dummy submit method
+ */
+extern int concap_drop_skb(struct concap_proto *cprot, struct sk_buff *skb);
+#endif
+#endif
diff --git a/include/linux/config.h b/include/linux/config.h
new file mode 100644
index 000000000000..9d1c14f7ad6d
--- /dev/null
+++ b/include/linux/config.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_CONFIG_H
+#define _LINUX_CONFIG_H
+
+#include <linux/autoconf.h>
+
+#endif
diff --git a/include/linux/console.h b/include/linux/console.h
new file mode 100644
index 000000000000..721371382ae5
--- /dev/null
+++ b/include/linux/console.h
@@ -0,0 +1,133 @@
+/*
+ *  linux/include/linux/console.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed:
+ * 10-Mar-94: Arno Griffioen: Conversion for vt100 emulator port from PC LINUX
+ */
+
+#ifndef _LINUX_CONSOLE_H_
+#define _LINUX_CONSOLE_H_ 1
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+struct vc_data;
+struct console_font_op;
+struct console_font;
+struct module;
+
+/*
+ * this is what the terminal answers to a ESC-Z or csi0c query.
+ */
+#define VT100ID "\033[?1;2c"
+#define VT102ID "\033[?6c"
+
+struct consw {
+	struct module *owner;
+	const char *(*con_startup)(void);
+	void	(*con_init)(struct vc_data *, int);
+	void	(*con_deinit)(struct vc_data *);
+	void	(*con_clear)(struct vc_data *, int, int, int, int);
+	void	(*con_putc)(struct vc_data *, int, int, int);
+	void	(*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
+	void	(*con_cursor)(struct vc_data *, int);
+	int	(*con_scroll)(struct vc_data *, int, int, int, int);
+	void	(*con_bmove)(struct vc_data *, int, int, int, int, int, int);
+	int	(*con_switch)(struct vc_data *);
+	int	(*con_blank)(struct vc_data *, int, int);
+	int	(*con_font_set)(struct vc_data *, struct console_font *, unsigned);
+	int	(*con_font_get)(struct vc_data *, struct console_font *);
+	int	(*con_font_default)(struct vc_data *, struct console_font *, char *);
+	int	(*con_font_copy)(struct vc_data *, int);
+	int	(*con_resize)(struct vc_data *, unsigned int, unsigned int);
+	int	(*con_set_palette)(struct vc_data *, unsigned char *);
+	int	(*con_scrolldelta)(struct vc_data *, int);
+	int	(*con_set_origin)(struct vc_data *);
+	void	(*con_save_screen)(struct vc_data *);
+	u8	(*con_build_attr)(struct vc_data *, u8, u8, u8, u8, u8);
+	void	(*con_invert_region)(struct vc_data *, u16 *, int);
+	u16    *(*con_screen_pos)(struct vc_data *, int);
+	unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+};
+
+extern const struct consw *conswitchp;
+
+extern const struct consw dummy_con;	/* dummy console buffer */
+extern const struct consw vga_con;	/* VGA text console */
+extern const struct consw newport_con;	/* SGI Newport console  */
+extern const struct consw prom_con;	/* SPARC PROM console */
+
+int take_over_console(const struct consw *sw, int first, int last, int deflt);
+void give_up_console(const struct consw *sw);
+
+/* scroll */
+#define SM_UP       (1)
+#define SM_DOWN     (2)
+
+/* cursor */
+#define CM_DRAW     (1)
+#define CM_ERASE    (2)
+#define CM_MOVE     (3)
+
+/*
+ * The interface for a console, or any other device that wants to capture
+ * console messages (printer driver?)
+ *
+ * If a console driver is marked CON_BOOT then it will be auto-unregistered
+ * when the first real console is registered.  This is for early-printk drivers.
+ */
+
+#define CON_PRINTBUFFER	(1)
+#define CON_CONSDEV	(2) /* Last on the command line */
+#define CON_ENABLED	(4)
+#define CON_BOOT	(8)
+
+struct console
+{
+	char	name[8];
+	void	(*write)(struct console *, const char *, unsigned);
+	int	(*read)(struct console *, char *, unsigned);
+	struct tty_driver *(*device)(struct console *, int *);
+	void	(*unblank)(void);
+	int	(*setup)(struct console *, char *);
+	short	flags;
+	short	index;
+	int	cflag;
+	void	*data;
+	struct	 console *next;
+};
+
+extern int add_preferred_console(char *name, int idx, char *options);
+extern void register_console(struct console *);
+extern int unregister_console(struct console *);
+extern struct console *console_drivers;
+extern void acquire_console_sem(void);
+extern int try_acquire_console_sem(void);
+extern void release_console_sem(void);
+extern void console_conditional_schedule(void);
+extern void console_unblank(void);
+extern struct tty_driver *console_device(int *);
+extern void console_stop(struct console *);
+extern void console_start(struct console *);
+extern int is_console_locked(void);
+
+/* Some debug stub to catch some of the obvious races in the VT code */
+#if 1
+#define WARN_CONSOLE_UNLOCKED()	WARN_ON(!is_console_locked() && !oops_in_progress)
+#else
+#define WARN_CONSOLE_UNLOCKED()
+#endif
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+#endif /* _LINUX_CONSOLE_H */
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
new file mode 100644
index 000000000000..725be90ef55e
--- /dev/null
+++ b/include/linux/console_struct.h
@@ -0,0 +1,123 @@
+/*
+ * console_struct.h
+ *
+ * Data structure describing single virtual console except for data
+ * used by vt.c.
+ *
+ * Fields marked with [#] must be set by the low-level driver.
+ * Fields marked with [!] can be changed by the low-level driver
+ * to achieve effects such as fast scrolling by changing the origin.
+ */
+
+struct vt_struct;
+
+#define NPAR 16
+
+struct vc_data {
+	unsigned short	vc_num;			/* Console number */
+	unsigned int	vc_cols;		/* [#] Console size */
+	unsigned int	vc_rows;
+	unsigned int	vc_size_row;		/* Bytes per row */
+	unsigned int	vc_scan_lines;		/* # of scan lines */
+	unsigned long	vc_origin;		/* [!] Start of real screen */
+	unsigned long	vc_scr_end;		/* [!] End of real screen */
+	unsigned long	vc_visible_origin;	/* [!] Top of visible window */
+	unsigned int	vc_top, vc_bottom;	/* Scrolling region */
+	const struct consw *vc_sw;
+	unsigned short	*vc_screenbuf;		/* In-memory character/attribute buffer */
+	unsigned int	vc_screenbuf_size;
+	unsigned char	vc_mode;		/* KD_TEXT, ... */
+	/* attributes for all characters on screen */
+	unsigned char	vc_attr;		/* Current attributes */
+	unsigned char	vc_def_color;		/* Default colors */
+	unsigned char	vc_color;		/* Foreground & background */
+	unsigned char	vc_s_color;		/* Saved foreground & background */
+	unsigned char	vc_ulcolor;		/* Color for underline mode */
+	unsigned char	vc_halfcolor;		/* Color for half intensity mode */
+	/* cursor */
+	unsigned int	vc_cursor_type;
+	unsigned short	vc_complement_mask;	/* [#] Xor mask for mouse pointer */
+	unsigned short	vc_s_complement_mask;	/* Saved mouse pointer mask */
+	unsigned int	vc_x, vc_y;		/* Cursor position */
+	unsigned int	vc_saved_x, vc_saved_y;
+	unsigned long	vc_pos;			/* Cursor address */
+	/* fonts */	
+	unsigned short	vc_hi_font_mask;	/* [#] Attribute set for upper 256 chars of font or 0 if not supported */
+	struct console_font vc_font;		/* Current VC font set */
+	unsigned short	vc_video_erase_char;	/* Background erase character */
+	/* VT terminal data */
+	unsigned int	vc_state;		/* Escape sequence parser state */
+	unsigned int	vc_npar,vc_par[NPAR];	/* Parameters of current escape sequence */
+	struct tty_struct *vc_tty;		/* TTY we are attached to */
+	/* data for manual vt switching */
+	struct vt_mode	vt_mode;
+	int		vt_pid;
+	int		vt_newvt;
+	wait_queue_head_t paste_wait;
+	/* mode flags */
+	unsigned int	vc_charset	: 1;	/* Character set G0 / G1 */
+	unsigned int	vc_s_charset	: 1;	/* Saved character set */
+	unsigned int	vc_disp_ctrl	: 1;	/* Display chars < 32? */
+	unsigned int	vc_toggle_meta	: 1;	/* Toggle high bit? */
+	unsigned int	vc_decscnm	: 1;	/* Screen Mode */
+	unsigned int	vc_decom	: 1;	/* Origin Mode */
+	unsigned int	vc_decawm	: 1;	/* Autowrap Mode */
+	unsigned int	vc_deccm	: 1;	/* Cursor Visible */
+	unsigned int	vc_decim	: 1;	/* Insert Mode */
+	unsigned int	vc_deccolm	: 1;	/* 80/132 Column Mode */
+	/* attribute flags */
+	unsigned int	vc_intensity	: 2;	/* 0=half-bright, 1=normal, 2=bold */
+	unsigned int	vc_underline	: 1;
+	unsigned int	vc_blink	: 1;
+	unsigned int	vc_reverse	: 1;
+	unsigned int	vc_s_intensity	: 2;	/* saved rendition */
+	unsigned int	vc_s_underline	: 1;
+	unsigned int	vc_s_blink	: 1;
+	unsigned int	vc_s_reverse	: 1;
+	/* misc */
+	unsigned int	vc_ques		: 1;
+	unsigned int	vc_need_wrap	: 1;
+	unsigned int	vc_can_do_color	: 1;
+	unsigned int	vc_report_mouse : 2;
+	unsigned int	vc_kmalloced	: 1;
+	unsigned char	vc_utf		: 1;	/* Unicode UTF-8 encoding */
+	unsigned char	vc_utf_count;
+		 int	vc_utf_char;
+	unsigned int	vc_tab_stop[8];		/* Tab stops. 256 columns. */
+	unsigned char   vc_palette[16*3];       /* Colour palette for VGA+ */
+	unsigned short * vc_translate;
+	unsigned char 	vc_G0_charset;
+	unsigned char 	vc_G1_charset;
+	unsigned char 	vc_saved_G0;
+	unsigned char 	vc_saved_G1;
+	unsigned int	vc_bell_pitch;		/* Console bell pitch */
+	unsigned int	vc_bell_duration;	/* Console bell duration */
+	struct vc_data **vc_display_fg;		/* [!] Ptr to var holding fg console for this display */
+	unsigned long	vc_uni_pagedir;
+	unsigned long	*vc_uni_pagedir_loc;  /* [!] Location of uni_pagedir variable for this console */
+	/* additional information is in vt_kern.h */
+};
+
+struct vc {
+	struct vc_data *d;
+
+	/* might add  scrmem, vt_struct, kbd  at some time,
+	   to have everything in one place - the disadvantage
+	   would be that vc_cons etc can no longer be static */
+};
+
+extern struct vc vc_cons [MAX_NR_CONSOLES];
+
+#define CUR_DEF		0
+#define CUR_NONE	1
+#define CUR_UNDERLINE	2
+#define CUR_LOWER_THIRD	3
+#define CUR_LOWER_HALF	4
+#define CUR_TWO_THIRDS	5
+#define CUR_BLOCK	6
+#define CUR_HWMASK	0x0f
+#define CUR_SWMASK	0xfff0
+
+#define CUR_DEFAULT CUR_UNDERLINE
+
+#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
new file mode 100644
index 000000000000..65842efc1b70
--- /dev/null
+++ b/include/linux/consolemap.h
@@ -0,0 +1,15 @@
+/*
+ * consolemap.h
+ *
+ * Interface between console.c, selection.c  and consolemap.c
+ */
+#define LAT1_MAP 0
+#define GRAF_MAP 1
+#define IBMPC_MAP 2
+#define USER_MAP 3
+
+struct vc_data;
+
+extern unsigned char inverse_translate(struct vc_data *conp, int glyph);
+extern unsigned short *set_translate(int m, struct vc_data *vc);
+extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
new file mode 100644
index 000000000000..fe0298e5dae1
--- /dev/null
+++ b/include/linux/cpu.h
@@ -0,0 +1,83 @@
+/*
+ * include/linux/cpu.h - generic cpu definition
+ *
+ * This is mainly for topological representation. We define the 
+ * basic 'struct cpu' here, which can be embedded in per-arch 
+ * definitions of processors.
+ *
+ * Basic handling of the devices is done in drivers/base/cpu.c
+ * and system devices are handled in drivers/base/sys.c. 
+ *
+ * CPUs are exported via driverfs in the class/cpu/devices/
+ * directory. 
+ *
+ * Per-cpu interfaces can be implemented using a struct device_interface. 
+ * See the following for how to do this: 
+ * - drivers/base/intf.c 
+ * - Documentation/driver-model/interface.txt
+ */
+#ifndef _LINUX_CPU_H_
+#define _LINUX_CPU_H_
+
+#include <linux/sysdev.h>
+#include <linux/node.h>
+#include <linux/compiler.h>
+#include <linux/cpumask.h>
+#include <asm/semaphore.h>
+
+struct cpu {
+	int node_id;		/* The node which contains the CPU */
+	int no_control;		/* Should the sysfs control file be created? */
+	struct sys_device sysdev;
+};
+
+extern int register_cpu(struct cpu *, int, struct node *);
+#ifdef CONFIG_HOTPLUG_CPU
+extern void unregister_cpu(struct cpu *, struct node *);
+#endif
+struct notifier_block;
+
+#ifdef CONFIG_SMP
+/* Need to know about CPUs going up/down? */
+extern int register_cpu_notifier(struct notifier_block *nb);
+extern void unregister_cpu_notifier(struct notifier_block *nb);
+
+int cpu_up(unsigned int cpu);
+
+#else
+
+static inline int register_cpu_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void unregister_cpu_notifier(struct notifier_block *nb)
+{
+}
+
+#endif /* CONFIG_SMP */
+extern struct sysdev_class cpu_sysdev_class;
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* Stop CPUs going up and down. */
+extern struct semaphore cpucontrol;
+#define lock_cpu_hotplug()	down(&cpucontrol)
+#define unlock_cpu_hotplug()	up(&cpucontrol)
+#define lock_cpu_hotplug_interruptible() down_interruptible(&cpucontrol)
+#define hotcpu_notifier(fn, pri) {				\
+	static struct notifier_block fn##_nb =			\
+		{ .notifier_call = fn, .priority = pri };	\
+	register_cpu_notifier(&fn##_nb);			\
+}
+int cpu_down(unsigned int cpu);
+#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu))
+#else
+#define lock_cpu_hotplug()	do { } while (0)
+#define unlock_cpu_hotplug()	do { } while (0)
+#define lock_cpu_hotplug_interruptible() 0
+#define hotcpu_notifier(fn, pri)
+
+/* CPUs don't go offline once they're online w/o CONFIG_HOTPLUG_CPU */
+static inline int cpu_is_offline(int cpu) { return 0; }
+#endif
+
+#endif /* _LINUX_CPU_H_ */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
new file mode 100644
index 000000000000..910eca35583d
--- /dev/null
+++ b/include/linux/cpufreq.h
@@ -0,0 +1,328 @@
+/*
+ *  linux/include/linux/cpufreq.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *            
+ *
+ * $Id: cpufreq.h,v 1.36 2003/01/20 17:31:48 db Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _LINUX_CPUFREQ_H
+#define _LINUX_CPUFREQ_H
+
+#include <linux/config.h>
+#include <linux/notifier.h>
+#include <linux/threads.h>
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/cpumask.h>
+
+#define CPUFREQ_NAME_LEN 16
+
+
+/*********************************************************************
+ *                     CPUFREQ NOTIFIER INTERFACE                    *
+ *********************************************************************/
+
+int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
+int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
+
+#define CPUFREQ_TRANSITION_NOTIFIER	(0)
+#define CPUFREQ_POLICY_NOTIFIER		(1)
+
+
+/* if (cpufreq_driver->target) exists, the ->governor decides what frequency
+ * within the limits is used. If (cpufreq_driver->setpolicy> exists, these
+ * two generic policies are available:
+ */
+
+#define CPUFREQ_POLICY_POWERSAVE	(1)
+#define CPUFREQ_POLICY_PERFORMANCE	(2)
+
+/* Frequency values here are CPU kHz so that hardware which doesn't run 
+ * with some frequencies can complain without having to guess what per 
+ * cent / per mille means. 
+ * Maximum transition latency is in microseconds - if it's unknown,
+ * CPUFREQ_ETERNAL shall be used.
+ */
+
+struct cpufreq_governor;
+
+#define CPUFREQ_ETERNAL			(-1)
+struct cpufreq_cpuinfo {
+	unsigned int		max_freq;
+	unsigned int		min_freq;
+	unsigned int		transition_latency; /* in 10^(-9) s = nanoseconds */
+};
+
+struct cpufreq_real_policy {
+	unsigned int		min;    /* in kHz */
+	unsigned int		max;    /* in kHz */
+        unsigned int		policy; /* see above */
+	struct cpufreq_governor	*governor; /* see below */
+};
+
+struct cpufreq_policy {
+	cpumask_t		cpus;	/* affected CPUs */
+	unsigned int		cpu;    /* cpu nr of registered CPU */
+	struct cpufreq_cpuinfo	cpuinfo;/* see above */
+
+	unsigned int		min;    /* in kHz */
+	unsigned int		max;    /* in kHz */
+	unsigned int		cur;    /* in kHz, only needed if cpufreq
+					 * governors are used */
+        unsigned int		policy; /* see above */
+	struct cpufreq_governor	*governor; /* see below */
+
+ 	struct semaphore	lock;   /* CPU ->setpolicy or ->target may
+					   only be called once a time */
+
+	struct work_struct	update; /* if update_policy() needs to be
+					 * called, but you're in IRQ context */
+
+	struct cpufreq_real_policy	user_policy;
+
+	struct kobject		kobj;
+	struct completion	kobj_unregister;
+};
+
+#define CPUFREQ_ADJUST		(0)
+#define CPUFREQ_INCOMPATIBLE	(1)
+#define CPUFREQ_NOTIFY		(2)
+
+
+/******************** cpufreq transition notifiers *******************/
+
+#define CPUFREQ_PRECHANGE	(0)
+#define CPUFREQ_POSTCHANGE	(1)
+#define CPUFREQ_RESUMECHANGE	(8)
+
+struct cpufreq_freqs {
+	unsigned int cpu;	/* cpu nr */
+	unsigned int old;
+	unsigned int new;
+	u8 flags;		/* flags of cpufreq_driver, see below. */
+};
+
+
+/**
+ * cpufreq_scale - "old * mult / div" calculation for large values (32-bit-arch safe)
+ * @old:   old value
+ * @div:   divisor
+ * @mult:  multiplier
+ *
+ *
+ *    new = old * mult / div
+ */
+static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mult)
+{
+#if BITS_PER_LONG == 32
+
+	u64 result = ((u64) old) * ((u64) mult);
+	do_div(result, div);
+	return (unsigned long) result;
+
+#elif BITS_PER_LONG == 64
+
+	unsigned long result = old * ((u64) mult);
+	result /= div;
+	return result;
+
+#endif
+};
+
+/*********************************************************************
+ *                          CPUFREQ GOVERNORS                        *
+ *********************************************************************/
+
+#define CPUFREQ_GOV_START  1
+#define CPUFREQ_GOV_STOP   2
+#define CPUFREQ_GOV_LIMITS 3
+
+struct cpufreq_governor {
+	char	name[CPUFREQ_NAME_LEN];
+	int 	(*governor)	(struct cpufreq_policy *policy,
+				 unsigned int event);
+	struct list_head	governor_list;
+	struct module		*owner;
+};
+
+/* pass a target to the cpufreq driver 
+ */
+extern int cpufreq_driver_target(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation);
+extern int __cpufreq_driver_target(struct cpufreq_policy *policy,
+				   unsigned int target_freq,
+				   unsigned int relation);
+
+
+/* pass an event to the cpufreq governor */
+int cpufreq_governor(unsigned int cpu, unsigned int event);
+
+int cpufreq_register_governor(struct cpufreq_governor *governor);
+void cpufreq_unregister_governor(struct cpufreq_governor *governor);
+
+
+/*********************************************************************
+ *                      CPUFREQ DRIVER INTERFACE                     *
+ *********************************************************************/
+
+#define CPUFREQ_RELATION_L 0  /* lowest frequency at or above target */
+#define CPUFREQ_RELATION_H 1  /* highest frequency below or at target */
+
+struct freq_attr;
+
+struct cpufreq_driver {
+	struct module           *owner;
+	char			name[CPUFREQ_NAME_LEN];
+	u8			flags;
+
+	/* needed by all drivers */
+	int	(*init)		(struct cpufreq_policy *policy);
+	int	(*verify)	(struct cpufreq_policy *policy);
+
+	/* define one out of two */
+	int	(*setpolicy)	(struct cpufreq_policy *policy);
+	int	(*target)	(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation);
+
+	/* should be defined, if possible */
+	unsigned int	(*get)	(unsigned int cpu);
+
+	/* optional */
+	int	(*exit)		(struct cpufreq_policy *policy);
+	int	(*resume)	(struct cpufreq_policy *policy);
+	struct freq_attr	**attr;
+};
+
+/* flags */
+
+#define CPUFREQ_STICKY		0x01	/* the driver isn't removed even if 
+					 * all ->init() calls failed */
+#define CPUFREQ_CONST_LOOPS 	0x02	/* loops_per_jiffy or other kernel
+					 * "constants" aren't affected by
+					 * frequency transitions */
+
+
+int cpufreq_register_driver(struct cpufreq_driver *driver_data);
+int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
+
+
+void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state);
+
+
+static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max) 
+{
+	if (policy->min < min)
+		policy->min = min;
+	if (policy->max < min)
+		policy->max = min;
+	if (policy->min > max)
+		policy->min = max;
+	if (policy->max > max)
+		policy->max = max;
+	if (policy->min > policy->max)
+		policy->min = policy->max;
+	return;
+}
+
+struct freq_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct cpufreq_policy *, char *);
+	ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count);
+};
+
+
+/*********************************************************************
+ *                        CPUFREQ 2.6. INTERFACE                     *
+ *********************************************************************/
+int cpufreq_set_policy(struct cpufreq_policy *policy);
+int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
+int cpufreq_update_policy(unsigned int cpu);
+
+/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
+unsigned int cpufreq_get(unsigned int cpu);
+
+
+/*********************************************************************
+ *                       CPUFREQ DEFAULT GOVERNOR                    *
+ *********************************************************************/
+
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+extern struct cpufreq_governor cpufreq_gov_performance;
+#define CPUFREQ_DEFAULT_GOVERNOR	&cpufreq_gov_performance
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
+extern struct cpufreq_governor cpufreq_gov_userspace;
+#define CPUFREQ_DEFAULT_GOVERNOR	&cpufreq_gov_userspace
+#endif
+
+
+/*********************************************************************
+ *                     FREQUENCY TABLE HELPERS                       *
+ *********************************************************************/
+
+#define CPUFREQ_ENTRY_INVALID ~0
+#define CPUFREQ_TABLE_END     ~1
+
+struct cpufreq_frequency_table {
+	unsigned int	index;     /* any */
+	unsigned int	frequency; /* kHz - doesn't need to be in ascending
+				    * order */
+};
+
+int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
+				    struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
+				   struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
+				   struct cpufreq_frequency_table *table,
+				   unsigned int target_freq,
+				   unsigned int relation,
+				   unsigned int *index);
+
+/* the following 3 funtions are for cpufreq core use only */
+struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
+void   cpufreq_cpu_put (struct cpufreq_policy *data);
+
+/* the following are really really optional */
+extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
+
+void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, 
+				      unsigned int cpu);
+
+void cpufreq_frequency_table_put_attr(unsigned int cpu);
+
+
+/*********************************************************************
+ *                     UNIFIED DEBUG HELPERS                         *
+ *********************************************************************/
+
+#define CPUFREQ_DEBUG_CORE	1
+#define CPUFREQ_DEBUG_DRIVER	2
+#define CPUFREQ_DEBUG_GOVERNOR	4
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+
+extern void cpufreq_debug_printk(unsigned int type, const char *prefix, 
+				 const char *fmt, ...);
+
+#else
+
+#define cpufreq_debug_printk(msg...) do { } while(0)
+
+#endif /* CONFIG_CPU_FREQ_DEBUG */
+
+#endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
new file mode 100644
index 000000000000..b15826f6e3a2
--- /dev/null
+++ b/include/linux/cpumask.h
@@ -0,0 +1,395 @@
+#ifndef __LINUX_CPUMASK_H
+#define __LINUX_CPUMASK_H
+
+/*
+ * Cpumasks provide a bitmap suitable for representing the
+ * set of CPU's in a system, one bit position per CPU number.
+ *
+ * See detailed comments in the file linux/bitmap.h describing the
+ * data type on which these cpumasks are based.
+ *
+ * For details of cpumask_scnprintf() and cpumask_parse(),
+ * see bitmap_scnprintf() and bitmap_parse() in lib/bitmap.c.
+ * For details of cpulist_scnprintf() and cpulist_parse(), see
+ * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
+ *
+ * The available cpumask operations are:
+ *
+ * void cpu_set(cpu, mask)		turn on bit 'cpu' in mask
+ * void cpu_clear(cpu, mask)		turn off bit 'cpu' in mask
+ * void cpus_setall(mask)		set all bits
+ * void cpus_clear(mask)		clear all bits
+ * int cpu_isset(cpu, mask)		true iff bit 'cpu' set in mask
+ * int cpu_test_and_set(cpu, mask)	test and set bit 'cpu' in mask
+ *
+ * void cpus_and(dst, src1, src2)	dst = src1 & src2  [intersection]
+ * void cpus_or(dst, src1, src2)	dst = src1 | src2  [union]
+ * void cpus_xor(dst, src1, src2)	dst = src1 ^ src2
+ * void cpus_andnot(dst, src1, src2)	dst = src1 & ~src2
+ * void cpus_complement(dst, src)	dst = ~src
+ *
+ * int cpus_equal(mask1, mask2)		Does mask1 == mask2?
+ * int cpus_intersects(mask1, mask2)	Do mask1 and mask2 intersect?
+ * int cpus_subset(mask1, mask2)	Is mask1 a subset of mask2?
+ * int cpus_empty(mask)			Is mask empty (no bits sets)?
+ * int cpus_full(mask)			Is mask full (all bits sets)?
+ * int cpus_weight(mask)		Hamming weigh - number of set bits
+ *
+ * void cpus_shift_right(dst, src, n)	Shift right
+ * void cpus_shift_left(dst, src, n)	Shift left
+ *
+ * int first_cpu(mask)			Number lowest set bit, or NR_CPUS
+ * int next_cpu(cpu, mask)		Next cpu past 'cpu', or NR_CPUS
+ *
+ * cpumask_t cpumask_of_cpu(cpu)	Return cpumask with bit 'cpu' set
+ * CPU_MASK_ALL				Initializer - all bits set
+ * CPU_MASK_NONE			Initializer - no bits set
+ * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
+ *
+ * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
+ * int cpumask_parse(ubuf, ulen, mask)	Parse ascii string as cpumask
+ * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
+ * int cpulist_parse(buf, map)		Parse ascii string as cpulist
+ *
+ * for_each_cpu_mask(cpu, mask)		for-loop cpu over mask
+ *
+ * int num_online_cpus()		Number of online CPUs
+ * int num_possible_cpus()		Number of all possible CPUs
+ * int num_present_cpus()		Number of present CPUs
+ *
+ * int cpu_online(cpu)			Is some cpu online?
+ * int cpu_possible(cpu)		Is some cpu possible?
+ * int cpu_present(cpu)			Is some cpu present (can schedule)?
+ *
+ * int any_online_cpu(mask)		First online cpu in mask
+ *
+ * for_each_cpu(cpu)			for-loop cpu over cpu_possible_map
+ * for_each_online_cpu(cpu)		for-loop cpu over cpu_online_map
+ * for_each_present_cpu(cpu)		for-loop cpu over cpu_present_map
+ *
+ * Subtlety:
+ * 1) The 'type-checked' form of cpu_isset() causes gcc (3.3.2, anyway)
+ *    to generate slightly worse code.  Note for example the additional
+ *    40 lines of assembly code compiling the "for each possible cpu"
+ *    loops buried in the disk_stat_read() macros calls when compiling
+ *    drivers/block/genhd.c (arch i386, CONFIG_SMP=y).  So use a simple
+ *    one-line #define for cpu_isset(), instead of wrapping an inline
+ *    inside a macro, the way we do the other calls.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/bitmap.h>
+#include <asm/bug.h>
+
+typedef struct { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
+extern cpumask_t _unused_cpumask_arg_;
+
+#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
+static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
+{
+	set_bit(cpu, dstp->bits);
+}
+
+#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
+static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
+{
+	clear_bit(cpu, dstp->bits);
+}
+
+#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
+static inline void __cpus_setall(cpumask_t *dstp, int nbits)
+{
+	bitmap_fill(dstp->bits, nbits);
+}
+
+#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
+static inline void __cpus_clear(cpumask_t *dstp, int nbits)
+{
+	bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
+
+#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
+static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
+{
+	return test_and_set_bit(cpu, addr->bits);
+}
+
+#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_andnot(dst, src1, src2) \
+				__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
+static inline void __cpus_complement(cpumask_t *dstp,
+					const cpumask_t *srcp, int nbits)
+{
+	bitmap_complement(dstp->bits, srcp->bits, nbits);
+}
+
+#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_equal(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_intersects(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_subset(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
+static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
+{
+	return bitmap_empty(srcp->bits, nbits);
+}
+
+#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS)
+static inline int __cpus_full(const cpumask_t *srcp, int nbits)
+{
+	return bitmap_full(srcp->bits, nbits);
+}
+
+#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
+static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
+{
+	return bitmap_weight(srcp->bits, nbits);
+}
+
+#define cpus_shift_right(dst, src, n) \
+			__cpus_shift_right(&(dst), &(src), (n), NR_CPUS)
+static inline void __cpus_shift_right(cpumask_t *dstp,
+					const cpumask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
+}
+
+#define cpus_shift_left(dst, src, n) \
+			__cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
+static inline void __cpus_shift_left(cpumask_t *dstp,
+					const cpumask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+
+#define first_cpu(src) __first_cpu(&(src), NR_CPUS)
+static inline int __first_cpu(const cpumask_t *srcp, int nbits)
+{
+	return min_t(int, nbits, find_first_bit(srcp->bits, nbits));
+}
+
+#define next_cpu(n, src) __next_cpu((n), &(src), NR_CPUS)
+static inline int __next_cpu(int n, const cpumask_t *srcp, int nbits)
+{
+	return min_t(int, nbits, find_next_bit(srcp->bits, nbits, n+1));
+}
+
+#define cpumask_of_cpu(cpu)						\
+({									\
+	typeof(_unused_cpumask_arg_) m;					\
+	if (sizeof(m) == sizeof(unsigned long)) {			\
+		m.bits[0] = 1UL<<(cpu);					\
+	} else {							\
+		cpus_clear(m);						\
+		cpu_set((cpu), m);					\
+	}								\
+	m;								\
+})
+
+#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
+
+#if NR_CPUS <= BITS_PER_LONG
+
+#define CPU_MASK_ALL							\
+(cpumask_t) { {								\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
+} }
+
+#else
+
+#define CPU_MASK_ALL							\
+(cpumask_t) { {								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL,			\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
+} }
+
+#endif
+
+#define CPU_MASK_NONE							\
+(cpumask_t) { {								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-1] =  0UL				\
+} }
+
+#define CPU_MASK_CPU0							\
+(cpumask_t) { {								\
+	[0] =  1UL							\
+} }
+
+#define cpus_addr(src) ((src).bits)
+
+#define cpumask_scnprintf(buf, len, src) \
+			__cpumask_scnprintf((buf), (len), &(src), NR_CPUS)
+static inline int __cpumask_scnprintf(char *buf, int len,
+					const cpumask_t *srcp, int nbits)
+{
+	return bitmap_scnprintf(buf, len, srcp->bits, nbits);
+}
+
+#define cpumask_parse(ubuf, ulen, dst) \
+			__cpumask_parse((ubuf), (ulen), &(dst), NR_CPUS)
+static inline int __cpumask_parse(const char __user *buf, int len,
+					cpumask_t *dstp, int nbits)
+{
+	return bitmap_parse(buf, len, dstp->bits, nbits);
+}
+
+#define cpulist_scnprintf(buf, len, src) \
+			__cpulist_scnprintf((buf), (len), &(src), NR_CPUS)
+static inline int __cpulist_scnprintf(char *buf, int len,
+					const cpumask_t *srcp, int nbits)
+{
+	return bitmap_scnlistprintf(buf, len, srcp->bits, nbits);
+}
+
+#define cpulist_parse(buf, dst) __cpulist_parse((buf), &(dst), NR_CPUS)
+static inline int __cpulist_parse(const char *buf, cpumask_t *dstp, int nbits)
+{
+	return bitmap_parselist(buf, dstp->bits, nbits);
+}
+
+#if NR_CPUS > 1
+#define for_each_cpu_mask(cpu, mask)		\
+	for ((cpu) = first_cpu(mask);		\
+		(cpu) < NR_CPUS;		\
+		(cpu) = next_cpu((cpu), (mask)))
+#else /* NR_CPUS == 1 */
+#define for_each_cpu_mask(cpu, mask) for ((cpu) = 0; (cpu) < 1; (cpu)++)
+#endif /* NR_CPUS */
+
+/*
+ * The following particular system cpumasks and operations manage
+ * possible, present and online cpus.  Each of them is a fixed size
+ * bitmap of size NR_CPUS.
+ *
+ *  #ifdef CONFIG_HOTPLUG_CPU
+ *     cpu_possible_map - all NR_CPUS bits set
+ *     cpu_present_map  - has bit 'cpu' set iff cpu is populated
+ *     cpu_online_map   - has bit 'cpu' set iff cpu available to scheduler
+ *  #else
+ *     cpu_possible_map - has bit 'cpu' set iff cpu is populated
+ *     cpu_present_map  - copy of cpu_possible_map
+ *     cpu_online_map   - has bit 'cpu' set iff cpu available to scheduler
+ *  #endif
+ *
+ *  In either case, NR_CPUS is fixed at compile time, as the static
+ *  size of these bitmaps.  The cpu_possible_map is fixed at boot
+ *  time, as the set of CPU id's that it is possible might ever
+ *  be plugged in at anytime during the life of that system boot.
+ *  The cpu_present_map is dynamic(*), representing which CPUs
+ *  are currently plugged in.  And cpu_online_map is the dynamic
+ *  subset of cpu_present_map, indicating those CPUs available
+ *  for scheduling.
+ *
+ *  If HOTPLUG is enabled, then cpu_possible_map is forced to have
+ *  all NR_CPUS bits set, otherwise it is just the set of CPUs that
+ *  ACPI reports present at boot.
+ *
+ *  If HOTPLUG is enabled, then cpu_present_map varies dynamically,
+ *  depending on what ACPI reports as currently plugged in, otherwise
+ *  cpu_present_map is just a copy of cpu_possible_map.
+ *
+ *  (*) Well, cpu_present_map is dynamic in the hotplug case.  If not
+ *      hotplug, it's a copy of cpu_possible_map, hence fixed at boot.
+ *
+ * Subtleties:
+ * 1) UP arch's (NR_CPUS == 1, CONFIG_SMP not defined) hardcode
+ *    assumption that their single CPU is online.  The UP
+ *    cpu_{online,possible,present}_maps are placebos.  Changing them
+ *    will have no useful affect on the following num_*_cpus()
+ *    and cpu_*() macros in the UP case.  This ugliness is a UP
+ *    optimization - don't waste any instructions or memory references
+ *    asking if you're online or how many CPUs there are if there is
+ *    only one CPU.
+ * 2) Most SMP arch's #define some of these maps to be some
+ *    other map specific to that arch.  Therefore, the following
+ *    must be #define macros, not inlines.  To see why, examine
+ *    the assembly code produced by the following.  Note that
+ *    set1() writes phys_x_map, but set2() writes x_map:
+ *        int x_map, phys_x_map;
+ *        #define set1(a) x_map = a
+ *        inline void set2(int a) { x_map = a; }
+ *        #define x_map phys_x_map
+ *        main(){ set1(3); set2(5); }
+ */
+
+extern cpumask_t cpu_possible_map;
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_present_map;
+
+#if NR_CPUS > 1
+#define num_online_cpus()	cpus_weight(cpu_online_map)
+#define num_possible_cpus()	cpus_weight(cpu_possible_map)
+#define num_present_cpus()	cpus_weight(cpu_present_map)
+#define cpu_online(cpu)		cpu_isset((cpu), cpu_online_map)
+#define cpu_possible(cpu)	cpu_isset((cpu), cpu_possible_map)
+#define cpu_present(cpu)	cpu_isset((cpu), cpu_present_map)
+#else
+#define num_online_cpus()	1
+#define num_possible_cpus()	1
+#define num_present_cpus()	1
+#define cpu_online(cpu)		((cpu) == 0)
+#define cpu_possible(cpu)	((cpu) == 0)
+#define cpu_present(cpu)	((cpu) == 0)
+#endif
+
+#define any_online_cpu(mask)			\
+({						\
+	int cpu;				\
+	for_each_cpu_mask(cpu, (mask))		\
+		if (cpu_online(cpu))		\
+			break;			\
+	cpu;					\
+})
+
+#define for_each_cpu(cpu)	  for_each_cpu_mask((cpu), cpu_possible_map)
+#define for_each_online_cpu(cpu)  for_each_cpu_mask((cpu), cpu_online_map)
+#define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map)
+
+#endif /* __LINUX_CPUMASK_H */
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
new file mode 100644
index 000000000000..2d9a500d994d
--- /dev/null
+++ b/include/linux/cpuset.h
@@ -0,0 +1,64 @@
+#ifndef _LINUX_CPUSET_H
+#define _LINUX_CPUSET_H
+/*
+ *  cpuset interface
+ *
+ *  Copyright (C) 2003 BULL SA
+ *  Copyright (C) 2004 Silicon Graphics, Inc.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
+
+#ifdef CONFIG_CPUSETS
+
+extern int cpuset_init(void);
+extern void cpuset_init_smp(void);
+extern void cpuset_fork(struct task_struct *p);
+extern void cpuset_exit(struct task_struct *p);
+extern const cpumask_t cpuset_cpus_allowed(const struct task_struct *p);
+void cpuset_init_current_mems_allowed(void);
+void cpuset_update_current_mems_allowed(void);
+void cpuset_restrict_to_mems_allowed(unsigned long *nodes);
+int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl);
+int cpuset_zone_allowed(struct zone *z);
+extern struct file_operations proc_cpuset_operations;
+extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
+
+#else /* !CONFIG_CPUSETS */
+
+static inline int cpuset_init(void) { return 0; }
+static inline void cpuset_init_smp(void) {}
+static inline void cpuset_fork(struct task_struct *p) {}
+static inline void cpuset_exit(struct task_struct *p) {}
+
+static inline cpumask_t cpuset_cpus_allowed(struct task_struct *p)
+{
+	return cpu_possible_map;
+}
+
+static inline void cpuset_init_current_mems_allowed(void) {}
+static inline void cpuset_update_current_mems_allowed(void) {}
+static inline void cpuset_restrict_to_mems_allowed(unsigned long *nodes) {}
+
+static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl)
+{
+	return 1;
+}
+
+static inline int cpuset_zone_allowed(struct zone *z)
+{
+	return 1;
+}
+
+static inline char *cpuset_task_status_allowed(struct task_struct *task,
+							char *buffer)
+{
+	return buffer;
+}
+
+#endif /* !CONFIG_CPUSETS */
+
+#endif /* _LINUX_CPUSET_H */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
new file mode 100644
index 000000000000..a8948f34b776
--- /dev/null
+++ b/include/linux/cramfs_fs.h
@@ -0,0 +1,98 @@
+#ifndef __CRAMFS_H
+#define __CRAMFS_H
+
+#ifndef __KERNEL__
+
+typedef unsigned char u8;
+typedef unsigned short u16;
+typedef unsigned int u32;
+
+#endif
+
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_SIGNATURE	"Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+	u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+	/* SIZE for device files is i_rdev */
+	u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+	/* NAMELEN is the length of the file name, divided by 4 and
+           rounded up.  (cramfs doesn't support hard links.) */
+	/* OFFSET: For symlinks and non-empty regular files, this
+	   contains the offset (divided by 4) of the file data in
+	   compressed form (starting with an array of block pointers;
+	   see README).  For non-empty directories it is the offset
+	   (divided by 4) of the inode of the first file in that
+	   directory.  For anything else, offset is zero. */
+	u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+	u32 crc;
+	u32 edition;
+	u32 blocks;
+	u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+	u32 magic;			/* 0x28cd3d45 - random number */
+	u32 size;			/* length in bytes */
+	u32 flags;			/* feature flags */
+	u32 future;			/* reserved for future use */
+	u8 signature[16];		/* "Compressed ROMFS" */
+	struct cramfs_info fsid;	/* unique filesystem info */
+	u8 name[16];			/* user-defined name */
+	struct cramfs_inode root;	/* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
+#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
+
+/*
+ * Valid values in super.flags.  Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
+				| CRAMFS_FLAG_HOLES \
+				| CRAMFS_FLAG_WRONG_SIGNATURE \
+				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+/* Uncompression interfaces to the underlying zlib */
+int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
+int cramfs_uncompress_init(void);
+int cramfs_uncompress_exit(void);
+
+#endif
diff --git a/include/linux/cramfs_fs_sb.h b/include/linux/cramfs_fs_sb.h
new file mode 100644
index 000000000000..8390693568fd
--- /dev/null
+++ b/include/linux/cramfs_fs_sb.h
@@ -0,0 +1,20 @@
+#ifndef _CRAMFS_FS_SB
+#define _CRAMFS_FS_SB
+
+/*
+ * cramfs super-block data in memory
+ */
+struct cramfs_sb_info {
+			unsigned long magic;
+			unsigned long size;
+			unsigned long blocks;
+			unsigned long files;
+			unsigned long flags;
+};
+
+static inline struct cramfs_sb_info *CRAMFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+#endif
diff --git a/include/linux/crc-ccitt.h b/include/linux/crc-ccitt.h
new file mode 100644
index 000000000000..90037617da8f
--- /dev/null
+++ b/include/linux/crc-ccitt.h
@@ -0,0 +1,17 @@
+#ifndef _LINUX_CRC_CCITT_H
+#define _LINUX_CRC_CCITT_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+extern u16 const crc_ccitt_table[256];
+
+extern u16 crc_ccitt(u16 crc, const u8 *buffer, size_t len);
+
+static inline u16 crc_ccitt_byte(u16 crc, const u8 c)
+{
+	return (crc >> 8) ^ crc_ccitt_table[(crc ^ c) & 0xff];
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_CRC_CCITT_H */
diff --git a/include/linux/crc32.h b/include/linux/crc32.h
new file mode 100644
index 000000000000..56c0645789a9
--- /dev/null
+++ b/include/linux/crc32.h
@@ -0,0 +1,27 @@
+/*
+ * crc32.h
+ * See linux/lib/crc32.c for license and changes
+ */
+#ifndef _LINUX_CRC32_H
+#define _LINUX_CRC32_H
+
+#include <linux/types.h>
+
+extern u32  crc32_le(u32 crc, unsigned char const *p, size_t len);
+extern u32  crc32_be(u32 crc, unsigned char const *p, size_t len);
+extern u32  bitreverse(u32 in);
+
+#define crc32(seed, data, length)  crc32_le(seed, (unsigned char const *)data, length)
+
+/*
+ * Helpers for hash table generation of ethernet nics:
+ *
+ * Ethernet sends the least significant bit of a byte first, thus crc32_le
+ * is used. The output of crc32_le is bit reversed [most significant bit
+ * is in bit nr 0], thus it must be reversed before use. Except for
+ * nics that bit swap the result internally...
+ */
+#define ether_crc(length, data)    bitreverse(crc32_le(~0, data, length))
+#define ether_crc_le(length, data) crc32_le(~0, data, length)
+
+#endif /* _LINUX_CRC32_H */
diff --git a/include/linux/crc32c.h b/include/linux/crc32c.h
new file mode 100644
index 000000000000..508f512e5a2f
--- /dev/null
+++ b/include/linux/crc32c.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_CRC32C_H
+#define _LINUX_CRC32C_H
+
+#include <linux/types.h>
+
+extern u32 crc32c_le(u32 crc, unsigned char const *address, size_t length);
+extern u32 crc32c_be(u32 crc, unsigned char const *address, size_t length);
+
+#define crc32c(seed, data, length)  crc32c_le(seed, (unsigned char const *)data, length)
+
+#endif	/* _LINUX_CRC32C_H */
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
new file mode 100644
index 000000000000..387da6a3e58c
--- /dev/null
+++ b/include/linux/crypto.h
@@ -0,0 +1,398 @@
+/*
+ * Scatterlist Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 David S. Miller (davem@redhat.com)
+ *
+ * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
+ * and Nettle, by Niels Möller.
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+#ifndef _LINUX_CRYPTO_H
+#define _LINUX_CRYPTO_H
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <asm/page.h>
+
+/*
+ * Algorithm masks and types.
+ */
+#define CRYPTO_ALG_TYPE_MASK		0x000000ff
+#define CRYPTO_ALG_TYPE_CIPHER		0x00000001
+#define CRYPTO_ALG_TYPE_DIGEST		0x00000002
+#define CRYPTO_ALG_TYPE_COMPRESS	0x00000004
+
+/*
+ * Transform masks and values (for crt_flags).
+ */
+#define CRYPTO_TFM_MODE_MASK		0x000000ff
+#define CRYPTO_TFM_REQ_MASK		0x000fff00
+#define CRYPTO_TFM_RES_MASK		0xfff00000
+
+#define CRYPTO_TFM_MODE_ECB		0x00000001
+#define CRYPTO_TFM_MODE_CBC		0x00000002
+#define CRYPTO_TFM_MODE_CFB		0x00000004
+#define CRYPTO_TFM_MODE_CTR		0x00000008
+
+#define CRYPTO_TFM_REQ_WEAK_KEY		0x00000100
+#define CRYPTO_TFM_RES_WEAK_KEY		0x00100000
+#define CRYPTO_TFM_RES_BAD_KEY_LEN   	0x00200000
+#define CRYPTO_TFM_RES_BAD_KEY_SCHED 	0x00400000
+#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 	0x00800000
+#define CRYPTO_TFM_RES_BAD_FLAGS 	0x01000000
+
+/*
+ * Miscellaneous stuff.
+ */
+#define CRYPTO_UNSPEC			0
+#define CRYPTO_MAX_ALG_NAME		64
+
+#define CRYPTO_DIR_ENCRYPT		1
+#define CRYPTO_DIR_DECRYPT		0
+
+struct scatterlist;
+
+/*
+ * Algorithms: modular crypto algorithm implementations, managed
+ * via crypto_register_alg() and crypto_unregister_alg().
+ */
+struct cipher_alg {
+	unsigned int cia_min_keysize;
+	unsigned int cia_max_keysize;
+	int (*cia_setkey)(void *ctx, const u8 *key,
+	                  unsigned int keylen, u32 *flags);
+	void (*cia_encrypt)(void *ctx, u8 *dst, const u8 *src);
+	void (*cia_decrypt)(void *ctx, u8 *dst, const u8 *src);
+};
+
+struct digest_alg {
+	unsigned int dia_digestsize;
+	void (*dia_init)(void *ctx);
+	void (*dia_update)(void *ctx, const u8 *data, unsigned int len);
+	void (*dia_final)(void *ctx, u8 *out);
+	int (*dia_setkey)(void *ctx, const u8 *key,
+	                  unsigned int keylen, u32 *flags);
+};
+
+struct compress_alg {
+	int (*coa_init)(void *ctx);
+	void (*coa_exit)(void *ctx);
+	int (*coa_compress)(void *ctx, const u8 *src, unsigned int slen,
+	                    u8 *dst, unsigned int *dlen);
+	int (*coa_decompress)(void *ctx, const u8 *src, unsigned int slen,
+	                      u8 *dst, unsigned int *dlen);
+};
+
+#define cra_cipher	cra_u.cipher
+#define cra_digest	cra_u.digest
+#define cra_compress	cra_u.compress
+
+struct crypto_alg {
+	struct list_head cra_list;
+	u32 cra_flags;
+	unsigned int cra_blocksize;
+	unsigned int cra_ctxsize;
+	const char cra_name[CRYPTO_MAX_ALG_NAME];
+
+	union {
+		struct cipher_alg cipher;
+		struct digest_alg digest;
+		struct compress_alg compress;
+	} cra_u;
+	
+	struct module *cra_module;
+};
+
+/*
+ * Algorithm registration interface.
+ */
+int crypto_register_alg(struct crypto_alg *alg);
+int crypto_unregister_alg(struct crypto_alg *alg);
+
+/*
+ * Algorithm query interface.
+ */
+#ifdef CONFIG_CRYPTO
+int crypto_alg_available(const char *name, u32 flags);
+#else
+static inline int crypto_alg_available(const char *name, u32 flags)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Transforms: user-instantiated objects which encapsulate algorithms
+ * and core processing logic.  Managed via crypto_alloc_tfm() and
+ * crypto_free_tfm(), as well as the various helpers below.
+ */
+struct crypto_tfm;
+
+struct cipher_tfm {
+	void *cit_iv;
+	unsigned int cit_ivsize;
+	u32 cit_mode;
+	int (*cit_setkey)(struct crypto_tfm *tfm,
+	                  const u8 *key, unsigned int keylen);
+	int (*cit_encrypt)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes);
+	int (*cit_encrypt_iv)(struct crypto_tfm *tfm,
+	                      struct scatterlist *dst,
+	                      struct scatterlist *src,
+	                      unsigned int nbytes, u8 *iv);
+	int (*cit_decrypt)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes);
+	int (*cit_decrypt_iv)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes, u8 *iv);
+	void (*cit_xor_block)(u8 *dst, const u8 *src);
+};
+
+struct digest_tfm {
+	void (*dit_init)(struct crypto_tfm *tfm);
+	void (*dit_update)(struct crypto_tfm *tfm,
+	                   struct scatterlist *sg, unsigned int nsg);
+	void (*dit_final)(struct crypto_tfm *tfm, u8 *out);
+	void (*dit_digest)(struct crypto_tfm *tfm, struct scatterlist *sg,
+	                   unsigned int nsg, u8 *out);
+	int (*dit_setkey)(struct crypto_tfm *tfm,
+	                  const u8 *key, unsigned int keylen);
+#ifdef CONFIG_CRYPTO_HMAC
+	void *dit_hmac_block;
+#endif
+};
+
+struct compress_tfm {
+	int (*cot_compress)(struct crypto_tfm *tfm,
+	                    const u8 *src, unsigned int slen,
+	                    u8 *dst, unsigned int *dlen);
+	int (*cot_decompress)(struct crypto_tfm *tfm,
+	                      const u8 *src, unsigned int slen,
+	                      u8 *dst, unsigned int *dlen);
+};
+
+#define crt_cipher	crt_u.cipher
+#define crt_digest	crt_u.digest
+#define crt_compress	crt_u.compress
+
+struct crypto_tfm {
+
+	u32 crt_flags;
+	
+	union {
+		struct cipher_tfm cipher;
+		struct digest_tfm digest;
+		struct compress_tfm compress;
+	} crt_u;
+	
+	struct crypto_alg *__crt_alg;
+};
+
+/* 
+ * Transform user interface.
+ */
+ 
+/*
+ * crypto_alloc_tfm() will first attempt to locate an already loaded algorithm.
+ * If that fails and the kernel supports dynamically loadable modules, it
+ * will then attempt to load a module of the same name or alias.  A refcount
+ * is grabbed on the algorithm which is then associated with the new transform.
+ *
+ * crypto_free_tfm() frees up the transform and any associated resources,
+ * then drops the refcount on the associated algorithm.
+ */
+struct crypto_tfm *crypto_alloc_tfm(const char *alg_name, u32 tfm_flags);
+void crypto_free_tfm(struct crypto_tfm *tfm);
+
+/*
+ * Transform helpers which query the underlying algorithm.
+ */
+static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_name;
+}
+
+static inline const char *crypto_tfm_alg_modname(struct crypto_tfm *tfm)
+{
+	return module_name(tfm->__crt_alg->cra_module);
+}
+
+static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
+}
+
+static inline unsigned int crypto_tfm_alg_min_keysize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->__crt_alg->cra_cipher.cia_min_keysize;
+}
+
+static inline unsigned int crypto_tfm_alg_max_keysize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->__crt_alg->cra_cipher.cia_max_keysize;
+}
+
+static inline unsigned int crypto_tfm_alg_ivsize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_ivsize;
+}
+
+static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_blocksize;
+}
+
+static inline unsigned int crypto_tfm_alg_digestsize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	return tfm->__crt_alg->cra_digest.dia_digestsize;
+}
+
+/*
+ * API wrappers.
+ */
+static inline void crypto_digest_init(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_init(tfm);
+}
+
+static inline void crypto_digest_update(struct crypto_tfm *tfm,
+                                        struct scatterlist *sg,
+                                        unsigned int nsg)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_update(tfm, sg, nsg);
+}
+
+static inline void crypto_digest_final(struct crypto_tfm *tfm, u8 *out)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_final(tfm, out);
+}
+
+static inline void crypto_digest_digest(struct crypto_tfm *tfm,
+                                        struct scatterlist *sg,
+                                        unsigned int nsg, u8 *out)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_digest(tfm, sg, nsg, out);
+}
+
+static inline int crypto_digest_setkey(struct crypto_tfm *tfm,
+                                       const u8 *key, unsigned int keylen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	if (tfm->crt_digest.dit_setkey == NULL)
+		return -ENOSYS;
+	return tfm->crt_digest.dit_setkey(tfm, key, keylen);
+}
+
+static inline int crypto_cipher_setkey(struct crypto_tfm *tfm,
+                                       const u8 *key, unsigned int keylen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_setkey(tfm, key, keylen);
+}
+
+static inline int crypto_cipher_encrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_encrypt(tfm, dst, src, nbytes);
+}                                        
+
+static inline int crypto_cipher_encrypt_iv(struct crypto_tfm *tfm,
+                                           struct scatterlist *dst,
+                                           struct scatterlist *src,
+                                           unsigned int nbytes, u8 *iv)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB);
+	return tfm->crt_cipher.cit_encrypt_iv(tfm, dst, src, nbytes, iv);
+}                                        
+
+static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_decrypt(tfm, dst, src, nbytes);
+}
+
+static inline int crypto_cipher_decrypt_iv(struct crypto_tfm *tfm,
+                                           struct scatterlist *dst,
+                                           struct scatterlist *src,
+                                           unsigned int nbytes, u8 *iv)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB);
+	return tfm->crt_cipher.cit_decrypt_iv(tfm, dst, src, nbytes, iv);
+}
+
+static inline void crypto_cipher_set_iv(struct crypto_tfm *tfm,
+                                        const u8 *src, unsigned int len)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	memcpy(tfm->crt_cipher.cit_iv, src, len);
+}
+
+static inline void crypto_cipher_get_iv(struct crypto_tfm *tfm,
+                                        u8 *dst, unsigned int len)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	memcpy(dst, tfm->crt_cipher.cit_iv, len);
+}
+
+static inline int crypto_comp_compress(struct crypto_tfm *tfm,
+                                       const u8 *src, unsigned int slen,
+                                       u8 *dst, unsigned int *dlen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_COMPRESS);
+	return tfm->crt_compress.cot_compress(tfm, src, slen, dst, dlen);
+}
+
+static inline int crypto_comp_decompress(struct crypto_tfm *tfm,
+                                         const u8 *src, unsigned int slen,
+                                         u8 *dst, unsigned int *dlen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_COMPRESS);
+	return tfm->crt_compress.cot_decompress(tfm, src, slen, dst, dlen);
+}
+
+/*
+ * HMAC support.
+ */
+#ifdef CONFIG_CRYPTO_HMAC
+void crypto_hmac_init(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen);
+void crypto_hmac_update(struct crypto_tfm *tfm,
+                        struct scatterlist *sg, unsigned int nsg);
+void crypto_hmac_final(struct crypto_tfm *tfm, u8 *key,
+                       unsigned int *keylen, u8 *out);
+void crypto_hmac(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen,
+                 struct scatterlist *sg, unsigned int nsg, u8 *out);
+#endif	/* CONFIG_CRYPTO_HMAC */
+
+#endif	/* _LINUX_CRYPTO_H */
+
diff --git a/include/linux/cryptohash.h b/include/linux/cryptohash.h
new file mode 100644
index 000000000000..c118b2ad9807
--- /dev/null
+++ b/include/linux/cryptohash.h
@@ -0,0 +1,12 @@
+#ifndef __CRYPTOHASH_H
+#define __CRYPTOHASH_H
+
+#define SHA_DIGEST_WORDS 5
+#define SHA_WORKSPACE_WORDS 80
+
+void sha_init(__u32 *buf);
+void sha_transform(__u32 *digest, const char *data, __u32 *W);
+
+__u32 half_md4_transform(__u32 buf[4], __u32 const in[8]);
+
+#endif
diff --git a/include/linux/ctype.h b/include/linux/ctype.h
new file mode 100644
index 000000000000..afa36392297a
--- /dev/null
+++ b/include/linux/ctype.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_CTYPE_H
+#define _LINUX_CTYPE_H
+
+/*
+ * NOTE! This ctype does not handle EOF like the standard C
+ * library is required to.
+ */
+
+#define _U	0x01	/* upper */
+#define _L	0x02	/* lower */
+#define _D	0x04	/* digit */
+#define _C	0x08	/* cntrl */
+#define _P	0x10	/* punct */
+#define _S	0x20	/* white space (space/lf/tab) */
+#define _X	0x40	/* hex digit */
+#define _SP	0x80	/* hard space (0x20) */
+
+extern unsigned char _ctype[];
+
+#define __ismask(x) (_ctype[(int)(unsigned char)(x)])
+
+#define isalnum(c)	((__ismask(c)&(_U|_L|_D)) != 0)
+#define isalpha(c)	((__ismask(c)&(_U|_L)) != 0)
+#define iscntrl(c)	((__ismask(c)&(_C)) != 0)
+#define isdigit(c)	((__ismask(c)&(_D)) != 0)
+#define isgraph(c)	((__ismask(c)&(_P|_U|_L|_D)) != 0)
+#define islower(c)	((__ismask(c)&(_L)) != 0)
+#define isprint(c)	((__ismask(c)&(_P|_U|_L|_D|_SP)) != 0)
+#define ispunct(c)	((__ismask(c)&(_P)) != 0)
+#define isspace(c)	((__ismask(c)&(_S)) != 0)
+#define isupper(c)	((__ismask(c)&(_U)) != 0)
+#define isxdigit(c)	((__ismask(c)&(_D|_X)) != 0)
+
+#define isascii(c) (((unsigned char)(c))<=0x7f)
+#define toascii(c) (((unsigned char)(c))&0x7f)
+
+static inline unsigned char __tolower(unsigned char c)
+{
+	if (isupper(c))
+		c -= 'A'-'a';
+	return c;
+}
+
+static inline unsigned char __toupper(unsigned char c)
+{
+	if (islower(c))
+		c -= 'a'-'A';
+	return c;
+}
+
+#define tolower(c) __tolower(c)
+#define toupper(c) __toupper(c)
+
+#endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
new file mode 100644
index 000000000000..6a3e6385d3f3
--- /dev/null
+++ b/include/linux/cuda.h
@@ -0,0 +1,36 @@
+/*
+ * Definitions for talking to the CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+#ifdef __KERNEL__
+
+extern int find_via_cuda(void);
+extern int cuda_request(struct adb_request *req,
+			void (*done)(struct adb_request *), int nbytes, ...);
+extern void cuda_poll(void);
+
+#endif	/* __KERNEL */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
new file mode 100644
index 000000000000..46d8254c1a79
--- /dev/null
+++ b/include/linux/cyclades.h
@@ -0,0 +1,827 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1	1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _LINUX_CYCLADES_H
+#define _LINUX_CYCLADES_H
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    time_t	   in_use;	/* Time device has been in use (secs) */
+    time_t	   recv_idle;	/* Time since last char received (secs) */
+    time_t	   xmit_idle;	/* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;	/* Bytes received */
+    unsigned long  xmit_bytes;	/* Bytes transmitted */
+    unsigned long  overruns;	/* Input overruns */
+    unsigned long  frame_errs;	/* Input framing errors */
+    unsigned long  parity_errs;	/* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW		0x43590a
+#define CYGETRFLOW		0x43590b
+#define CYSETRTSDTR_INV		0x43590c
+#define CYGETRTSDTR_INV		0x43590d
+#define CYZSETPOLLCYCLE		0x43590e
+#define CYZGETPOLLCYCLE		0x43590f
+#define CYGETCD1400VER		0x435910
+#define CYGETCARDINFO		0x435911
+#define	CYSETWAIT		0x435912
+#define	CYGETWAIT		0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL	(HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define	CYZ_MAX_SPEED	921600
+
+#define	CYZ_FIFO_SIZE	16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/* #include "cyclomz.h" */
+/****************** ****************** *******************/
+/*
+ *	The data types defined below are used in all ZFIRM interface
+ *	data structures. They accomodate differences between HW
+ *	architectures and compilers.
+ */
+
+#if defined(__alpha__)
+typedef unsigned long	ucdouble;	/* 64 bits, unsigned */
+typedef unsigned int	uclong;		/* 32 bits, unsigned */
+#else
+typedef unsigned long	uclong;		/* 32 bits, unsigned */
+#endif
+typedef unsigned short	ucshort;	/* 16 bits, unsigned */
+typedef unsigned char	ucchar;		/* 8 bits, unsigned */
+
+/*
+ *	Memory Window Sizes
+ */
+
+#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
+#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
+						  8Zo V.2 */
+#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
+
+/*
+ *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *	normally will access only interested on the fpga_id, fpga_version,
+ *	start_cpu and stop_cpu.
+ */
+
+struct	CUSTOM_REG {
+	uclong	fpga_id;		/* FPGA Identification Register */
+	uclong	fpga_version;		/* FPGA Version Number Register */
+	uclong	cpu_start;		/* CPU start Register (write) */
+	uclong	cpu_stop;		/* CPU stop Register (write) */
+	uclong	misc_reg;		/* Miscelaneous Register */
+	uclong	idt_mode;		/* IDT mode Register */
+	uclong	uart_irq_status;	/* UART IRQ status Register */
+	uclong	clear_timer0_irq;	/* Clear timer interrupt Register */
+	uclong	clear_timer1_irq;	/* Clear timer interrupt Register */
+	uclong	clear_timer2_irq;	/* Clear timer interrupt Register */
+	uclong	test_register;		/* Test Register */
+	uclong	test_count;		/* Test Count Register */
+	uclong	timer_select;		/* Timer select register */
+	uclong	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
+	uclong	ram_wait_state;		/* RAM wait-state Register */
+	uclong	uart_wait_state;	/* UART wait-state Register */
+	uclong	timer_wait_state;	/* timer wait-state Register */
+	uclong	ack_wait_state;		/* ACK wait State Register */
+};
+
+/*
+ *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *	registers. This structure can be used to access the 9060 registers
+ *	(memory mapped).
+ */
+
+struct RUNTIME_9060 {
+	uclong	loc_addr_range;	/* 00h - Local Address Range */
+	uclong	loc_addr_base;	/* 04h - Local Address Base */
+	uclong	loc_arbitr;	/* 08h - Local Arbitration */
+	uclong	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
+	uclong	loc_rom_range;	/* 10h - Local ROM Range */
+	uclong	loc_rom_base;	/* 14h - Local ROM Base */
+	uclong	loc_bus_descr;	/* 18h - Local Bus descriptor */
+	uclong	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
+	uclong	loc_base_mst;	/* 20h - Local Base for Master PCI */
+	uclong	loc_range_io;	/* 24h - Local Range for Master IO */
+	uclong	pci_base_mst;	/* 28h - PCI Base for Master PCI */
+	uclong	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
+	uclong	filler1;	/* 30h */
+	uclong	filler2;	/* 34h */
+	uclong	filler3;	/* 38h */
+	uclong	filler4;	/* 3Ch */
+	uclong	mail_box_0;	/* 40h - Mail Box 0 */
+	uclong	mail_box_1;	/* 44h - Mail Box 1 */
+	uclong	mail_box_2;	/* 48h - Mail Box 2 */
+	uclong	mail_box_3;	/* 4Ch - Mail Box 3 */
+	uclong	filler5;	/* 50h */
+	uclong	filler6;	/* 54h */
+	uclong	filler7;	/* 58h */
+	uclong	filler8;	/* 5Ch */
+	uclong	pci_doorbell;	/* 60h - PCI to Local Doorbell */
+	uclong	loc_doorbell;	/* 64h - Local to PCI Doorbell */
+	uclong	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
+	uclong	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
+#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
+#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
+#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
+#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *	This file contains the definitions for interfacing with the
+ *	Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define	MAX_CHAN	64		/* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
+#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
+#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
+#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
+
+#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
+					   (1000 ms) */
+#define	ZF_TINACT	ZF_TINACT_DEF
+
+struct	FIRM_ID {
+	uclong	signature;		/* ZFIRM/U signature */
+	uclong	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define	C_OS_LINUX	0x00000030	/* generic Linux system */
+
+/* channel op_mode */
+
+#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
+#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
+#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
+#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
+#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
+
+/* comm_parity - parity */
+
+#define	C_PR_NONE	0x00000000	/* None */
+#define	C_PR_ODD	0x00000001	/* Odd */
+#define C_PR_EVEN	0x00000002	/* Even */
+#define C_PR_MARK	0x00000004	/* Mark */
+#define C_PR_SPACE	0x00000008	/* Space */
+#define C_PR_PARITY	0x000000ff
+
+#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
+#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5	0x00000001
+#define C_DL_CS6	0x00000002
+#define C_DL_CS7	0x00000004
+#define C_DL_CS8	0x00000008
+#define	C_DL_CS		0x0000000f
+#define C_DL_1STOP	0x00000010
+#define C_DL_15STOP	0x00000020
+#define C_DL_2STOP	0x00000040
+#define	C_DL_STOP	0x000000f0
+
+/* interrupt enabling/status */
+
+#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
+#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
+#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
+#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
+#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
+#define	C_IN_MDCD	0x00000100	/* modem DCD change */
+#define	C_IN_MDSR	0x00000200	/* modem DSR change */
+#define	C_IN_MRI	0x00000400	/* modem RI change */
+#define	C_IN_MCTS	0x00000800	/* modem CTS change */
+#define	C_IN_RXBRK	0x00001000	/* Break received */
+#define	C_IN_PR_ERROR	0x00002000	/* parity error */
+#define	C_IN_FR_ERROR	0x00004000	/* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS	0x00040000	/* modem RTS drop */
+#define C_IN_ICHAR	0x00080000
+ 
+/* flow control */
+
+#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
+#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
+#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
+#define	C_FL_SWFLOW	0x0000000f
+
+/* flow status */
+
+#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
+#define	C_FS_SENDING	0x00000001	/* UART is sending data */
+#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
+					   IOCTLM command */
+#define	C_RS_RTS	0x00000001	/* RTS */
+#define	C_RS_DTR	0x00000004	/* DTR */
+#define	C_RS_DCD	0x00000100	/* CD */
+#define	C_RS_DSR	0x00000200	/* DSR */
+#define	C_RS_RI		0x00000400	/* RI */
+#define	C_RS_CTS	0x00000800	/* CTS */
+
+/* commands Host <-> Board */
+
+#define	C_CM_RESET	0x01		/* reset/flush buffers */
+#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
+#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
+#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
+#define	C_CM_SENDXOFF	0x10		/* send Xoff */
+#define	C_CM_SENDXON	0x11		/* send Xon */
+#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
+#define	C_CM_SENDBRK	0x41		/* send break */
+#define	C_CM_INTBACK	0x42		/* Interrupt back */
+#define	C_CM_SET_BREAK	0x43		/* Tx break on */
+#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
+#define	C_CM_CMD_DONE	0x45		/* Previous command done */
+#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
+#define	C_CM_TINACT	0x51		/* set inactivity detection */
+#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
+#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
+#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
+#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
+#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
+#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
+#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
+					   driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+					   driver */
+
+#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
+#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
+#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
+#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
+#define	C_CM_TXFEMPTY	0x64
+#define	C_CM_ICHAR	0x65
+#define	C_CM_MDCD	0x70		/* modem DCD change */
+#define	C_CM_MDSR	0x71		/* modem DSR change */
+#define	C_CM_MRI	0x72		/* modem RI change */
+#define	C_CM_MCTS	0x73		/* modem CTS change */
+#define C_CM_MRTS	0x74		/* modem RTS drop */
+#define	C_CM_RXBRK	0x84		/* Break received */
+#define	C_CM_PR_ERROR	0x85		/* Parity error */
+#define	C_CM_FR_ERROR	0x86		/* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL	0x88            /* RX buffer overflow */
+#define	C_CM_CMDERROR	0x90		/* command error */
+#define	C_CM_FATAL	0x91		/* fatal error */
+#define	C_CM_HW_RESET	0x92		/* reset board */
+
+/*
+ *	CH_CTRL - This per port structure contains all parameters
+ *	that control an specific port. It can be seen as the
+ *	configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+	uclong	op_mode;	/* operation mode */
+	uclong	intr_enable;	/* interrupt masking */
+	uclong	sw_flow;	/* SW flow control */
+	uclong	flow_status;	/* output flow status */
+	uclong	comm_baud;	/* baud rate  - numerically specified */
+	uclong	comm_parity;	/* parity */
+	uclong	comm_data_l;	/* data length/stop */
+	uclong	comm_flags;	/* other flags */
+	uclong	hw_flow;	/* HW flow control */
+	uclong	rs_control;	/* RS-232 outputs */
+	uclong	rs_status;	/* RS-232 inputs */
+	uclong	flow_xon;	/* xon char */
+	uclong	flow_xoff;	/* xoff char */
+	uclong	hw_overflow;	/* hw overflow counter */
+	uclong	sw_overflow;	/* sw overflow counter */
+	uclong	comm_error;	/* frame/parity error counter */
+	uclong ichar;
+	uclong filler[7];
+};
+
+
+/*
+ *	BUF_CTRL - This per channel structure contains
+ *	all Tx and Rx buffer control for a given channel.
+ */
+
+struct	BUF_CTRL	{
+	uclong	flag_dma;	/* buffers are in Host memory */
+	uclong	tx_bufaddr;	/* address of the tx buffer */
+	uclong	tx_bufsize;	/* tx buffer size */
+	uclong	tx_threshold;	/* tx low water mark */
+	uclong	tx_get;		/* tail index tx buf */
+	uclong	tx_put;		/* head index tx buf */
+	uclong	rx_bufaddr;	/* address of the rx buffer */
+	uclong	rx_bufsize;	/* rx buffer size */
+	uclong	rx_threshold;	/* rx high water mark */
+	uclong	rx_get;		/* tail index rx buf */
+	uclong	rx_put;		/* head index rx buf */
+	uclong	filler[5];	/* filler to align structures */
+};
+
+/*
+ *	BOARD_CTRL - This per board structure contains all global 
+ *	control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+	/* static info provided by the on-board CPU */
+	uclong	n_channel;	/* number of channels */
+	uclong	fw_version;	/* firmware version */
+
+	/* static info provided by the driver */
+	uclong	op_system;	/* op_system id */
+	uclong	dr_version;	/* driver version */
+
+	/* board control area */
+	uclong	inactivity;	/* inactivity control */
+
+	/* host to FW commands */
+	uclong	hcmd_channel;	/* channel number */
+	uclong	hcmd_param;	/* pointer to parameters */
+
+	/* FW to Host commands */
+	uclong	fwcmd_channel;	/* channel number */
+	uclong	fwcmd_param;	/* pointer to parameters */
+	uclong	zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+	/* filler so the structures are aligned */
+	uclong	filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE	(10*MAX_CHAN)
+
+struct	INT_QUEUE {
+	unsigned char	intr_code[QUEUE_SIZE];
+	unsigned long	channel[QUEUE_SIZE];
+	unsigned long	param[QUEUE_SIZE];
+	unsigned long	put;
+	unsigned long	get;
+};
+
+/*
+ *	ZFW_CTRL - This is the data structure that includes all other
+ *	data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+	struct BOARD_CTRL	board_ctrl;
+	struct CH_CTRL		ch_ctrl[MAX_CHAN];
+	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+/* Per card data structure */
+struct resource;
+struct cyclades_card {
+    unsigned long base_phys;
+    unsigned long ctl_phys;
+    void __iomem *base_addr;
+    void __iomem *ctl_addr;
+    int irq;
+    int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
+    int first_line;	/* minor number of first channel on card */
+    int nports;		/* Number of ports in the card */
+    int bus_index;	/* address shift - 0 for ISA, 1 for PCI */
+    int	intr_enabled;	/* FW Interrupt flag - 0 disabled, 1 enabled */
+    struct pci_dev *pdev;
+#ifdef __KERNEL__
+    spinlock_t card_lock;
+#else
+    unsigned long filler;
+#endif
+};
+
+struct cyclades_chip {
+  int filler;
+};
+
+
+#ifdef __KERNEL__
+
+/***************************************
+ * Memory access functions/macros      *
+ * (required to support Alpha systems) *
+ ***************************************/
+
+#define cy_writeb(port,val)     {writeb((val),(port)); mb();}
+#define cy_writew(port,val)     {writew((val),(port)); mb();}
+#define cy_writel(port,val)     {writel((val),(port)); mb();}
+
+#define cy_readb(port)  readb(port)
+#define cy_readw(port)  readw(port)
+#define cy_readl(port)  readl(port)
+
+/*
+ * Statistics counters
+ */
+struct cyclades_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+	int                     magic;
+	int			card;
+	int			line;
+	int			flags; 		/* defined in tty.h */
+	int                     type;		/* UART type */
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			xmit_fifo_size;
+	int                     cor1,cor2,cor3,cor4,cor5;
+	int                     tbpr,tco,rbpr,rco;
+	int			baud;
+	int			rflow;
+	int			rtsdtr_inv;
+	int			chip_rev;
+	int			custom_divisor;
+	int                     x_char; /* to be pushed out ASAP */
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned long		event;
+	unsigned long		last_active;
+	int			count;	/* # of fd on device */
+	int                     breakon;
+	int                     breakoff;
+	int			blocked_open; /* # of blocked opens */
+	unsigned char 		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+        int                     default_threshold;
+        int                     default_timeout;
+	unsigned long		jiffies[3];
+	unsigned long		rflush_count;
+	struct cyclades_monitor	mon;
+	struct cyclades_idle_stats	idle_stats;
+	struct cyclades_icount	icount;
+	struct work_struct	tqueue;
+	wait_queue_head_t       open_wait;
+	wait_queue_head_t       close_wait;
+	wait_queue_head_t       shutdown_wait;
+	wait_queue_head_t       delta_msr_wait;
+	int throttle;
+};
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at cy interrupt time.
+ */
+#define Cy_EVENT_READ_PROCESS		0
+#define Cy_EVENT_WRITE_WAKEUP		1
+#define Cy_EVENT_HANGUP			2
+#define Cy_EVENT_BREAK			3
+#define Cy_EVENT_OPEN_WAKEUP		4
+#define Cy_EVENT_SHUTDOWN_WAKEUP	5
+#define	Cy_EVENT_DELTA_WAKEUP		6
+#define	Cy_EVENT_Z_RX_FULL		7
+
+#define	CLOSING_WAIT_DELAY	30*HZ
+#define CY_CLOSING_WAIT_NONE	65535
+#define CY_CLOSING_WAIT_INF	0
+
+
+#define CyMAX_CHIPS_PER_CARD	8
+#define CyMAX_CHAR_FIFO		12
+#define CyPORTS_PER_CHIP	4
+#define	CD1400_MAX_SPEED	115200
+
+#define	CyISA_Ywin	0x2000
+
+#define CyPCI_Ywin 	0x4000
+#define CyPCI_Yctl 	0x80
+#define CyPCI_Zctl 	CTRL_WINDOW_SIZE
+#define CyPCI_Zwin 	0x80000
+#define CyPCI_Ze_win 	(2 * CyPCI_Zwin)
+
+#define PCI_DEVICE_ID_MASK	0x06
+
+/**** CD1400 registers ****/
+
+#define CD1400_REV_G	0x46
+#define CD1400_REV_J	0x48
+
+#define CyRegSize  	0x0400
+#define Cy_HwReset 	0x1400
+#define Cy_ClrIntr 	0x1800
+#define Cy_EpldRev 	0x1e00
+
+/* Global Registers */
+
+#define CyGFRCR		(0x40*2)
+#define      CyRevE		(44)
+#define CyCAR		(0x68*2)
+#define      CyCHAN_0		(0x00)
+#define      CyCHAN_1		(0x01)
+#define      CyCHAN_2		(0x02)
+#define      CyCHAN_3		(0x03)
+#define CyGCR		(0x4B*2)
+#define      CyCH0_SERIAL	(0x00)
+#define      CyCH0_PARALLEL	(0x80)
+#define CySVRR		(0x67*2)
+#define      CySRModem		(0x04)
+#define      CySRTransmit	(0x02)
+#define      CySRReceive	(0x01)
+#define CyRICR		(0x44*2)
+#define CyTICR		(0x45*2)
+#define CyMICR		(0x46*2)
+#define      CyICR0		(0x00)
+#define      CyICR1		(0x01)
+#define      CyICR2		(0x02)
+#define      CyICR3		(0x03)
+#define CyRIR		(0x6B*2)
+#define CyTIR		(0x6A*2)
+#define CyMIR		(0x69*2)
+#define      CyIRDirEq		(0x80)
+#define      CyIRBusy		(0x40)
+#define      CyIRUnfair		(0x20)
+#define      CyIRContext	(0x1C)
+#define      CyIRChannel	(0x03)
+#define CyPPR 		(0x7E*2)
+#define      CyCLOCK_20_1MS	(0x27)
+#define      CyCLOCK_25_1MS	(0x31)
+#define      CyCLOCK_25_5MS	(0xf4)
+#define      CyCLOCK_60_1MS	(0x75)
+#define      CyCLOCK_60_2MS	(0xea)
+
+/* Virtual Registers */
+
+#define CyRIVR		(0x43*2)
+#define CyTIVR		(0x42*2)
+#define CyMIVR		(0x41*2)
+#define      CyIVRMask (0x07)
+#define      CyIVRRxEx (0x07)
+#define      CyIVRRxOK (0x03)
+#define      CyIVRTxOK (0x02)
+#define      CyIVRMdmOK (0x01)
+#define CyTDR		(0x63*2)
+#define CyRDSR		(0x62*2)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyBREAK		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyOVERRUN		(0x01)
+#define CyMISR		(0x4C*2)
+/* see CyMCOR_ and CyMSVR_ for bits*/
+#define CyEOSRR		(0x60*2)
+
+/* Channel Registers */
+
+#define CyLIVR		(0x18*2)
+#define      CyMscsr		(0x01)
+#define      CyTdsr		(0x02)
+#define      CyRgdsr		(0x03)
+#define      CyRedsr		(0x07)
+#define CyCCR		(0x05*2)
+/* Format 1 */
+#define      CyCHAN_RESET	(0x80)
+#define      CyCHIP_RESET	(0x81)
+#define      CyFlushTransFIFO	(0x82)
+/* Format 2 */
+#define      CyCOR_CHANGE	(0x40)
+#define      CyCOR1ch		(0x02)
+#define      CyCOR2ch		(0x04)
+#define      CyCOR3ch		(0x08)
+/* Format 3 */
+#define      CySEND_SPEC_1	(0x21)
+#define      CySEND_SPEC_2	(0x22)
+#define      CySEND_SPEC_3	(0x23)
+#define      CySEND_SPEC_4	(0x24)
+/* Format 4 */
+#define      CyCHAN_CTL		(0x10)
+#define      CyDIS_RCVR		(0x01)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_XMTR		(0x08)
+#define CySRER		(0x06*2)
+#define      CyMdmCh		(0x80)
+#define      CyRxData		(0x10)
+#define      CyTxRdy		(0x04)
+#define      CyTxMpty		(0x02)
+#define      CyNNDT		(0x01)
+#define CyCOR1		(0x08*2)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_0		(0x20)
+#define      CyPARITY_1		(0xA0)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_1_STOP		(0x00)
+#define      Cy_1_5_STOP	(0x04)
+#define      Cy_2_STOP		(0x08)
+#define      Cy_5_BITS		(0x00)
+#define      Cy_6_BITS		(0x01)
+#define      Cy_7_BITS		(0x02)
+#define      Cy_8_BITS		(0x03)
+#define CyCOR2		(0x09*2)
+#define      CyIXM		(0x80)
+#define      CyTxIBE		(0x40)
+#define      CyETC		(0x20)
+#define      CyAUTO_TXFL	(0x60)
+#define      CyLLM		(0x10)
+#define      CyRLM		(0x08)
+#define      CyRtsAO		(0x04)
+#define      CyCtsAE		(0x02)
+#define      CyDsrAE		(0x01)
+#define CyCOR3		(0x0A*2)
+#define      CySPL_CH_DRANGE	(0x80)  /* special character detect range */
+#define      CySPL_CH_DET1	(0x40)  /* enable special character detection
+                                                               on SCHR4-SCHR3 */
+#define      CyFL_CTRL_TRNSP	(0x20)  /* Flow Control Transparency */
+#define      CySPL_CH_DET2	(0x10)  /* Enable special character detection
+                                                               on SCHR2-SCHR1 */
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR4		(0x1E*2)
+#define CyCOR5		(0x1F*2)
+#define CyCCSR		(0x0B*2)
+#define      CyRxEN		(0x80)
+#define      CyRxFloff		(0x40)
+#define      CyRxFlon		(0x20)
+#define      CyTxEN		(0x08)
+#define      CyTxFloff		(0x04)
+#define      CyTxFlon		(0x02)
+#define CyRDCR		(0x0E*2)
+#define CySCHR1		(0x1A*2)
+#define CySCHR2 	(0x1B*2)
+#define CySCHR3		(0x1C*2)
+#define CySCHR4		(0x1D*2)
+#define CySCRL		(0x22*2)
+#define CySCRH		(0x23*2)
+#define CyLNC		(0x24*2)
+#define CyMCOR1 	(0x15*2)
+#define CyMCOR2		(0x16*2)
+#define CyRTPR		(0x21*2)
+#define CyMSVR1		(0x6C*2)
+#define CyMSVR2		(0x6D*2)
+#define      CyANY_DELTA	(0xF0)
+#define      CyDSR		(0x80)
+#define      CyCTS		(0x40)
+#define      CyRI		(0x20)
+#define      CyDCD		(0x10)
+#define      CyDTR              (0x02)
+#define      CyRTS              (0x01)
+#define CyPVSR		(0x6F*2)
+#define CyRBPR		(0x78*2)
+#define CyRCOR		(0x7C*2)
+#define CyTBPR		(0x72*2)
+#define CyTCOR		(0x76*2)
+
+/* Custom Registers */
+
+#define	CyPLX_VER	(0x3400)
+#define	PLX_9050	0x0b
+#define	PLX_9060	0x0c
+#define	PLX_9080	0x0d
+
+/***************************************************************************/
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h
new file mode 100644
index 000000000000..04fa7dff079c
--- /dev/null
+++ b/include/linux/cyclomx.h
@@ -0,0 +1,80 @@
+#ifndef	_CYCLOMX_H
+#define	_CYCLOMX_H
+/*
+* cyclomx.h	Cyclom 2X WAN Link Driver.
+*		User-level API definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on wanpipe.h by Gene Kozin <genek@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 2000/07/13    acme		remove crap #if KERNEL_VERSION > blah
+* 2000/01/21    acme            rename cyclomx_open to cyclomx_mod_inc_use_count
+*                               and cyclomx_close to cyclomx_mod_dec_use_count
+* 1999/05/19	acme		wait_queue_head_t wait_stats(support for 2.3.*)
+* 1999/01/03	acme		judicious use of data types
+* 1998/12/27	acme		cleanup: PACKED not needed
+* 1998/08/08	acme		Version 0.0.1
+*/
+
+#include <linux/config.h>
+#include <linux/wanrouter.h>
+#include <linux/spinlock.h>
+
+#ifdef	__KERNEL__
+/* Kernel Interface */
+
+#include <linux/cycx_drv.h>	/* Cyclom 2X support module API definitions */
+#include <linux/cycx_cfm.h>	/* Cyclom 2X firmware module definitions */
+#ifdef CONFIG_CYCLOMX_X25
+#include <linux/cycx_x25.h>
+#endif
+
+#define	is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0)
+
+/* Adapter Data Space.
+ * This structure is needed because we handle multiple cards, otherwise
+ * static data would do it.
+ */
+struct cycx_device {
+	char devname[WAN_DRVNAME_SZ + 1];/* card name */
+	struct cycx_hw hw;		/* hardware configuration */
+	struct wan_device wandev;	/* WAN device data space */
+	u32 state_tick;			/* link state timestamp */
+	spinlock_t lock;
+	char in_isr;			/* interrupt-in-service flag */
+	char buff_int_mode_unbusy;      /* flag for carrying out dev_tint */
+	wait_queue_head_t wait_stats;  /* to wait for the STATS indication */
+	void __iomem *mbox;			/* -> mailbox */
+	void (*isr)(struct cycx_device* card);	/* interrupt service routine */
+	int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data);
+	union {
+#ifdef CONFIG_CYCLOMX_X25
+		struct { /* X.25 specific data */
+			u32 lo_pvc;
+			u32 hi_pvc;
+			u32 lo_svc;
+			u32 hi_svc;
+			struct cycx_x25_stats stats;
+			spinlock_t lock;
+			u32 connection_keys;
+		} x;
+#endif
+	} u;
+};
+
+/* Public Functions */
+void cycx_set_state(struct cycx_device *card, int state);
+
+#ifdef CONFIG_CYCLOMX_X25
+int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf);
+#endif
+#endif	/* __KERNEL__ */
+#endif	/* _CYCLOMX_H */
diff --git a/include/linux/cycx_cfm.h b/include/linux/cycx_cfm.h
new file mode 100644
index 000000000000..032d26ed8384
--- /dev/null
+++ b/include/linux/cycx_cfm.h
@@ -0,0 +1,101 @@
+/*
+* cycx_cfm.h	Cyclom 2X WAN Link Driver.
+*		Definitions for the Cyclom 2X Firmware Module (CFM).
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1998/08/08	acme		Initial version.
+*/
+#ifndef	_CYCX_CFM_H
+#define	_CYCX_CFM_H
+
+/* Defines */
+
+#define	CFM_VERSION	2
+#define	CFM_SIGNATURE	"CFM - Cyclades CYCX Firmware Module"
+
+/* min/max */
+#define	CFM_IMAGE_SIZE	0x20000	/* max size of CYCX code image file */
+#define	CFM_DESCR_LEN	256	/* max length of description string */
+#define	CFM_MAX_CYCX	1	/* max number of compatible adapters */
+#define	CFM_LOAD_BUFSZ	0x400	/* buffer size for reset code (buffer_load) */
+
+/* Firmware Commands */
+#define GEN_POWER_ON	0x1280
+
+#define GEN_SET_SEG	0x1401	/* boot segment setting. */
+#define GEN_BOOT_DAT	0x1402	/* boot data. */
+#define GEN_START	0x1403	/* board start. */
+#define GEN_DEFPAR	0x1404	/* buffer length for boot. */
+
+/* Adapter Types */
+#define CYCX_2X		2
+/* for now only the 2X is supported, no plans to support 8X or 16X */
+#define CYCX_8X		8
+#define CYCX_16X	16
+
+#define	CFID_X25_2X	5200
+
+/**
+ *	struct cycx_fw_info - firmware module information.
+ *	@codeid - firmware ID
+ *	@version - firmware version number
+ *	@adapter - compatible adapter types
+ *	@memsize - minimum memory size
+ *	@reserved - reserved
+ *	@startoffs - entry point offset
+ *	@winoffs - dual-port memory window offset
+ *	@codeoffs - code load offset
+ *	@codesize - code size
+ *	@dataoffs - configuration data load offset
+ *	@datasize - configuration data size
+ */
+struct cycx_fw_info {
+	unsigned short	codeid;
+	unsigned short	version;
+	unsigned short	adapter[CFM_MAX_CYCX];
+	unsigned long	memsize;
+	unsigned short	reserved[2];
+	unsigned short	startoffs;
+	unsigned short	winoffs;
+	unsigned short	codeoffs;
+	unsigned long	codesize;
+	unsigned short	dataoffs;
+	unsigned long	datasize;
+};
+
+/**
+ *	struct cycx_firmware - CYCX firmware file structure
+ *	@signature - CFM file signature
+ *	@version - file format version
+ *	@checksum - info + image
+ *	@reserved - reserved
+ *	@descr - description string
+ *	@info - firmware module info
+ *	@image - code image (variable size)
+ */
+struct cycx_firmware {
+	char		    signature[80];
+	unsigned short	    version;
+	unsigned short	    checksum;
+	unsigned short	    reserved[6];
+	char		    descr[CFM_DESCR_LEN];
+	struct cycx_fw_info info;
+	unsigned char	    image[0];
+};
+
+struct cycx_fw_header {
+	unsigned long  reset_size;
+	unsigned long  data_size;
+	unsigned long  code_size;
+};
+#endif	/* _CYCX_CFM_H */
diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h
new file mode 100644
index 000000000000..6621df86a748
--- /dev/null
+++ b/include/linux/cycx_drv.h
@@ -0,0 +1,65 @@
+/*
+* cycx_drv.h	CYCX Support Module.  Kernel API Definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdladrv.h by Gene Kozin <genek@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1999/10/23	acme		cycxhw_t cleanup
+* 1999/01/03	acme		more judicious use of data types...
+*				uclong, ucchar, etc deleted, the u8, u16, u32
+*				types are the portable way to go.
+* 1999/01/03	acme		judicious use of data types... u16, u32, etc
+* 1998/12/26	acme	 	FIXED_BUFFERS, CONF_OFFSET,
+*                               removal of cy_read{bwl}
+* 1998/08/08	acme	 	Initial version.
+*/
+#ifndef	_CYCX_DRV_H
+#define	_CYCX_DRV_H
+
+#define	CYCX_WINDOWSIZE	0x4000	/* default dual-port memory window size */
+#define	GEN_CYCX_INTR	0x02
+#define	RST_ENABLE	0x04
+#define	START_CPU	0x06
+#define	RST_DISABLE	0x08
+#define	FIXED_BUFFERS	0x08
+#define	TEST_PATTERN	0xaa55
+#define	CMD_OFFSET	0x20
+#define CONF_OFFSET     0x0380
+#define	RESET_OFFSET	0x3c00	/* For reset file load */
+#define	DATA_OFFSET	0x0100	/* For code and data files load */
+#define	START_OFFSET	0x3ff0	/* 80186 starts here */
+
+/**
+ *	struct cycx_hw - Adapter hardware configuration
+ *	@fwid - firmware ID
+ *	@irq - interrupt request level
+ *	@dpmbase - dual-port memory base
+ *	@dpmsize - dual-port memory size
+ *	@reserved - reserved for future use
+ */
+struct cycx_hw {
+	u32 fwid;
+	int irq;
+	void __iomem *dpmbase;
+	u32 dpmsize;
+	u32 reserved[5];
+};
+
+/* Function Prototypes */
+extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base);
+extern int cycx_down(struct cycx_hw *hw);
+extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
+extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
+extern int cycx_exec(void __iomem *addr);
+
+extern void cycx_inten(struct cycx_hw *hw);
+extern void cycx_intr(struct cycx_hw *hw);
+#endif	/* _CYCX_DRV_H */
diff --git a/include/linux/cycx_x25.h b/include/linux/cycx_x25.h
new file mode 100644
index 000000000000..b10a7f3a8cac
--- /dev/null
+++ b/include/linux/cycx_x25.h
@@ -0,0 +1,125 @@
+#ifndef	_CYCX_X25_H
+#define	_CYCX_X25_H
+/*
+* cycx_x25.h	Cyclom X.25 firmware API definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdla_x25.h by Gene Kozin <74604.152@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 2000/04/02	acme		dprintk and cycx_debug
+* 1999/01/03	acme		judicious use of data types
+* 1999/01/02	acme		#define X25_ACK_N3	0x4411
+* 1998/12/28	acme		cleanup: lot'o'things removed
+*					 commands listed,
+*					 TX25Cmd & TX25Config structs
+*					 typedef'ed
+*/
+#ifndef PACKED
+#define PACKED __attribute__((packed))
+#endif 
+
+/* X.25 shared memory layout. */
+#define	X25_MBOX_OFFS	0x300	/* general mailbox block */
+#define	X25_RXMBOX_OFFS	0x340	/* receive mailbox */
+
+/* Debug */
+#define dprintk(level, format, a...) if (cycx_debug >= level) printk(format, ##a)
+
+extern unsigned int cycx_debug;
+
+/* Data Structures */
+/* X.25 Command Block. */
+struct cycx_x25_cmd {
+	u16 command PACKED;
+	u16 link    PACKED; /* values: 0 or 1 */
+	u16 len     PACKED; /* values: 0 thru 0x205 (517) */
+	u32 buf     PACKED;
+};
+
+/* Defines for the 'command' field. */
+#define X25_CONNECT_REQUEST             0x4401
+#define X25_CONNECT_RESPONSE            0x4402
+#define X25_DISCONNECT_REQUEST          0x4403
+#define X25_DISCONNECT_RESPONSE         0x4404
+#define X25_DATA_REQUEST                0x4405
+#define X25_ACK_TO_VC			0x4406
+#define X25_INTERRUPT_RESPONSE          0x4407
+#define X25_CONFIG                      0x4408
+#define X25_CONNECT_INDICATION          0x4409
+#define X25_CONNECT_CONFIRM             0x440A
+#define X25_DISCONNECT_INDICATION       0x440B
+#define X25_DISCONNECT_CONFIRM          0x440C
+#define X25_DATA_INDICATION             0x440E
+#define X25_INTERRUPT_INDICATION        0x440F
+#define X25_ACK_FROM_VC			0x4410
+#define X25_ACK_N3			0x4411
+#define X25_CONNECT_COLLISION           0x4413
+#define X25_N3WIN                       0x4414
+#define X25_LINE_ON                     0x4415
+#define X25_LINE_OFF                    0x4416
+#define X25_RESET_REQUEST               0x4417
+#define X25_LOG                         0x4500
+#define X25_STATISTIC                   0x4600
+#define X25_TRACE                       0x4700
+#define X25_N2TRACEXC                   0x4702
+#define X25_N3TRACEXC                   0x4703
+
+/**
+ *	struct cycx_x25_config - cyclom2x x25 firmware configuration
+ *	@link - link number
+ *	@speed - line speed
+ *	@clock - internal/external
+ *	@n2 - # of level 2 retransm.(values: 1 thru FF)
+ *	@n2win - level 2 window (values: 1 thru 7)
+ *	@n3win - level 3 window (values: 1 thru 7)
+ *	@nvc - # of logical channels (values: 1 thru 64)
+ *	@pktlen - level 3 packet lenght - log base 2 of size
+ *	@locaddr - my address
+ *	@remaddr - remote address
+ *	@t1 - time, in seconds
+ *	@t2 - time, in seconds
+ *	@t21 - time, in seconds
+ *	@npvc - # of permanent virt. circuits (1 thru nvc)
+ *	@t23 - time, in seconds
+ *	@flags - see dosx25.doc, in portuguese, for details
+ */
+struct cycx_x25_config {
+	u8  link	PACKED;
+	u8  speed	PACKED;
+	u8  clock	PACKED;
+	u8  n2		PACKED;
+	u8  n2win	PACKED;
+	u8  n3win	PACKED;
+	u8  nvc		PACKED;
+	u8  pktlen	PACKED;
+	u8  locaddr	PACKED;
+	u8  remaddr	PACKED;
+	u16 t1		PACKED;
+	u16 t2		PACKED;
+	u8  t21		PACKED;
+	u8  npvc	PACKED;
+	u8  t23		PACKED;
+	u8  flags	PACKED;
+};
+
+struct cycx_x25_stats {
+	u16 rx_crc_errors	PACKED;
+	u16 rx_over_errors	PACKED;
+	u16 n2_tx_frames 	PACKED;
+	u16 n2_rx_frames 	PACKED;
+	u16 tx_timeouts 	PACKED;
+	u16 rx_timeouts 	PACKED;
+	u16 n3_tx_packets 	PACKED;
+	u16 n3_rx_packets 	PACKED;
+	u16 tx_aborts	 	PACKED;
+	u16 rx_aborts	 	PACKED;
+};
+#endif	/* _CYCX_X25_H */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
new file mode 100644
index 000000000000..50be290d24d2
--- /dev/null
+++ b/include/linux/dcache.h
@@ -0,0 +1,338 @@
+#ifndef __LINUX_DCACHE_H
+#define __LINUX_DCACHE_H
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <linux/rcupdate.h>
+#include <asm/bug.h>
+
+struct nameidata;
+struct vfsmount;
+
+/*
+ * linux/include/linux/dcache.h
+ *
+ * Dirent cache data structures
+ *
+ * (C) Copyright 1997 Thomas Schoebel-Theuer,
+ * with heavy changes by Linus Torvalds
+ */
+
+#define IS_ROOT(x) ((x) == (x)->d_parent)
+
+/*
+ * "quick string" -- eases parameter passing, but more importantly
+ * saves "metadata" about the string (ie length and the hash).
+ *
+ * hash comes first so it snuggles against d_parent in the
+ * dentry.
+ */
+struct qstr {
+	unsigned int hash;
+	unsigned int len;
+	const unsigned char *name;
+};
+
+struct dentry_stat_t {
+	int nr_dentry;
+	int nr_unused;
+	int age_limit;          /* age in seconds */
+	int want_pages;         /* pages requested by system */
+	int dummy[2];
+};
+extern struct dentry_stat_t dentry_stat;
+
+/* Name hashing routines. Initial hash value */
+/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
+#define init_name_hash()		0
+
+/* partial hash update function. Assume roughly 4 bits per character */
+static inline unsigned long
+partial_name_hash(unsigned long c, unsigned long prevhash)
+{
+	return (prevhash + (c << 4) + (c >> 4)) * 11;
+}
+
+/*
+ * Finally: cut down the number of bits to a int value (and try to avoid
+ * losing bits)
+ */
+static inline unsigned long end_name_hash(unsigned long hash)
+{
+	return (unsigned int) hash;
+}
+
+/* Compute the hash for a name string. */
+static inline unsigned int
+full_name_hash(const unsigned char *name, unsigned int len)
+{
+	unsigned long hash = init_name_hash();
+	while (len--)
+		hash = partial_name_hash(*name++, hash);
+	return end_name_hash(hash);
+}
+
+struct dcookie_struct;
+
+#define DNAME_INLINE_LEN_MIN 36
+
+struct dentry {
+	atomic_t d_count;
+	unsigned int d_flags;		/* protected by d_lock */
+	spinlock_t d_lock;		/* per dentry lock */
+	struct inode *d_inode;		/* Where the name belongs to - NULL is
+					 * negative */
+	/*
+	 * The next three fields are touched by __d_lookup.  Place them here
+	 * so they all fit in a 16-byte range, with 16-byte alignment.
+	 */
+	struct dentry *d_parent;	/* parent directory */
+	struct qstr d_name;
+
+	struct list_head d_lru;		/* LRU list */
+	struct list_head d_child;	/* child of parent list */
+	struct list_head d_subdirs;	/* our children */
+	struct list_head d_alias;	/* inode alias list */
+	unsigned long d_time;		/* used by d_revalidate */
+	struct dentry_operations *d_op;
+	struct super_block *d_sb;	/* The root of the dentry tree */
+	void *d_fsdata;			/* fs-specific data */
+ 	struct rcu_head d_rcu;
+	struct dcookie_struct *d_cookie; /* cookie, if any */
+	struct hlist_node d_hash;	/* lookup hash list */	
+	int d_mounted;
+	unsigned char d_iname[DNAME_INLINE_LEN_MIN];	/* small names */
+};
+
+struct dentry_operations {
+	int (*d_revalidate)(struct dentry *, struct nameidata *);
+	int (*d_hash) (struct dentry *, struct qstr *);
+	int (*d_compare) (struct dentry *, struct qstr *, struct qstr *);
+	int (*d_delete)(struct dentry *);
+	void (*d_release)(struct dentry *);
+	void (*d_iput)(struct dentry *, struct inode *);
+};
+
+/* the dentry parameter passed to d_hash and d_compare is the parent
+ * directory of the entries to be compared. It is used in case these
+ * functions need any directory specific information for determining
+ * equivalency classes.  Using the dentry itself might not work, as it
+ * might be a negative dentry which has no information associated with
+ * it */
+
+/*
+locking rules:
+		big lock	dcache_lock	d_lock   may block
+d_revalidate:	no		no		no       yes
+d_hash		no		no		no       yes
+d_compare:	no		yes		yes      no
+d_delete:	no		yes		no       no
+d_release:	no		no		no       yes
+d_iput:		no		no		no       yes
+ */
+
+/* d_flags entries */
+#define DCACHE_AUTOFS_PENDING 0x0001    /* autofs: "under construction" */
+#define DCACHE_NFSFS_RENAMED  0x0002    /* this dentry has been "silly
+					 * renamed" and has to be
+					 * deleted on the last dput()
+					 */
+#define	DCACHE_DISCONNECTED 0x0004
+     /* This dentry is possibly not currently connected to the dcache tree,
+      * in which case its parent will either be itself, or will have this
+      * flag as well.  nfsd will not use a dentry with this bit set, but will
+      * first endeavour to clear the bit either by discovering that it is
+      * connected, or by performing lookup operations.   Any filesystem which
+      * supports nfsd_operations MUST have a lookup function which, if it finds
+      * a directory inode with a DCACHE_DISCONNECTED dentry, will d_move
+      * that dentry into place and return that dentry rather than the passed one,
+      * typically using d_splice_alias.
+      */
+
+#define DCACHE_REFERENCED	0x0008  /* Recently used, don't discard. */
+#define DCACHE_UNHASHED		0x0010	
+
+extern spinlock_t dcache_lock;
+
+/**
+ * d_drop - drop a dentry
+ * @dentry: dentry to drop
+ *
+ * d_drop() unhashes the entry from the parent dentry hashes, so that it won't
+ * be found through a VFS lookup any more. Note that this is different from
+ * deleting the dentry - d_delete will try to mark the dentry negative if
+ * possible, giving a successful _negative_ lookup, while d_drop will
+ * just make the cache lookup fail.
+ *
+ * d_drop() is used mainly for stuff that wants to invalidate a dentry for some
+ * reason (NFS timeouts or autofs deletes).
+ *
+ * __d_drop requires dentry->d_lock.
+ */
+
+static inline void __d_drop(struct dentry *dentry)
+{
+	if (!(dentry->d_flags & DCACHE_UNHASHED)) {
+		dentry->d_flags |= DCACHE_UNHASHED;
+		hlist_del_rcu(&dentry->d_hash);
+	}
+}
+
+static inline void d_drop(struct dentry *dentry)
+{
+	spin_lock(&dcache_lock);
+	spin_lock(&dentry->d_lock);
+ 	__d_drop(dentry);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&dcache_lock);
+}
+
+static inline int dname_external(struct dentry *dentry)
+{
+	return dentry->d_name.name != dentry->d_iname;
+}
+
+/*
+ * These are the low-level FS interfaces to the dcache..
+ */
+extern void d_instantiate(struct dentry *, struct inode *);
+extern struct dentry * d_instantiate_unique(struct dentry *, struct inode *);
+extern void d_delete(struct dentry *);
+
+/* allocate/de-allocate */
+extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
+extern struct dentry * d_alloc_anon(struct inode *);
+extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
+extern void shrink_dcache_sb(struct super_block *);
+extern void shrink_dcache_parent(struct dentry *);
+extern void shrink_dcache_anon(struct hlist_head *);
+extern int d_invalidate(struct dentry *);
+
+/* only used at mount-time */
+extern struct dentry * d_alloc_root(struct inode *);
+
+/* <clickety>-<click> the ramfs-type tree */
+extern void d_genocide(struct dentry *);
+
+extern struct dentry *d_find_alias(struct inode *);
+extern void d_prune_aliases(struct inode *);
+
+/* test whether we have any submounts in a subdir tree */
+extern int have_submounts(struct dentry *);
+
+/*
+ * This adds the entry to the hash queues.
+ */
+extern void d_rehash(struct dentry *);
+
+/**
+ * d_add - add dentry to hash queues
+ * @entry: dentry to add
+ * @inode: The inode to attach to this dentry
+ *
+ * This adds the entry to the hash queues and initializes @inode.
+ * The entry was actually filled in earlier during d_alloc().
+ */
+ 
+static inline void d_add(struct dentry *entry, struct inode *inode)
+{
+	d_instantiate(entry, inode);
+	d_rehash(entry);
+}
+
+/**
+ * d_add_unique - add dentry to hash queues without aliasing
+ * @entry: dentry to add
+ * @inode: The inode to attach to this dentry
+ *
+ * This adds the entry to the hash queues and initializes @inode.
+ * The entry was actually filled in earlier during d_alloc().
+ */
+static inline struct dentry *d_add_unique(struct dentry *entry, struct inode *inode)
+{
+	struct dentry *res;
+
+	res = d_instantiate_unique(entry, inode);
+	d_rehash(res != NULL ? res : entry);
+	return res;
+}
+
+/* used for rename() and baskets */
+extern void d_move(struct dentry *, struct dentry *);
+
+/* appendix may either be NULL or be used for transname suffixes */
+extern struct dentry * d_lookup(struct dentry *, struct qstr *);
+extern struct dentry * __d_lookup(struct dentry *, struct qstr *);
+
+/* validate "insecure" dentry pointer */
+extern int d_validate(struct dentry *, struct dentry *);
+
+extern char * d_path(struct dentry *, struct vfsmount *, char *, int);
+  
+/* Allocation counts.. */
+
+/**
+ *	dget, dget_locked	-	get a reference to a dentry
+ *	@dentry: dentry to get a reference to
+ *
+ *	Given a dentry or %NULL pointer increment the reference count
+ *	if appropriate and return the dentry. A dentry will not be 
+ *	destroyed when it has references. dget() should never be
+ *	called for dentries with zero reference counter. For these cases
+ *	(preferably none, functions in dcache.c are sufficient for normal
+ *	needs and they take necessary precautions) you should hold dcache_lock
+ *	and call dget_locked() instead of dget().
+ */
+ 
+static inline struct dentry *dget(struct dentry *dentry)
+{
+	if (dentry) {
+		BUG_ON(!atomic_read(&dentry->d_count));
+		atomic_inc(&dentry->d_count);
+	}
+	return dentry;
+}
+
+extern struct dentry * dget_locked(struct dentry *);
+
+/**
+ *	d_unhashed -	is dentry hashed
+ *	@dentry: entry to check
+ *
+ *	Returns true if the dentry passed is not currently hashed.
+ */
+ 
+static inline int d_unhashed(struct dentry *dentry)
+{
+	return (dentry->d_flags & DCACHE_UNHASHED);
+}
+
+static inline struct dentry *dget_parent(struct dentry *dentry)
+{
+	struct dentry *ret;
+
+	spin_lock(&dentry->d_lock);
+	ret = dget(dentry->d_parent);
+	spin_unlock(&dentry->d_lock);
+	return ret;
+}
+
+extern void dput(struct dentry *);
+
+static inline int d_mountpoint(struct dentry *dentry)
+{
+	return dentry->d_mounted;
+}
+
+extern struct vfsmount *lookup_mnt(struct vfsmount *, struct dentry *);
+extern struct dentry *lookup_create(struct nameidata *nd, int is_dir);
+
+extern int sysctl_vfs_cache_pressure;
+
+#endif /* __KERNEL__ */
+
+#endif	/* __LINUX_DCACHE_H */
diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h
new file mode 100644
index 000000000000..c28050136164
--- /dev/null
+++ b/include/linux/dcookies.h
@@ -0,0 +1,69 @@
+/*
+ * dcookies.h
+ *
+ * Persistent cookie-path mappings
+ *
+ * Copyright 2002 John Levon <levon@movementarian.org>
+ */
+
+#ifndef DCOOKIES_H
+#define DCOOKIES_H
+ 
+#include <linux/config.h>
+
+#ifdef CONFIG_PROFILING
+ 
+#include <linux/types.h>
+ 
+struct dcookie_user;
+ 
+/**
+ * dcookie_register - register a user of dcookies
+ *
+ * Register as a dcookie user. Returns %NULL on failure.
+ */
+struct dcookie_user * dcookie_register(void);
+
+/**
+ * dcookie_unregister - unregister a user of dcookies
+ *
+ * Unregister as a dcookie user. This may invalidate
+ * any dcookie values returned from get_dcookie().
+ */
+void dcookie_unregister(struct dcookie_user * user);
+  
+/**
+ * get_dcookie - acquire a dcookie
+ *
+ * Convert the given dentry/vfsmount pair into
+ * a cookie value.
+ *
+ * Returns -EINVAL if no living task has registered as a
+ * dcookie user.
+ *
+ * Returns 0 on success, with *cookie filled in
+ */
+int get_dcookie(struct dentry * dentry, struct vfsmount * vfsmnt,
+	unsigned long * cookie);
+
+#else
+
+struct dcookie_user * dcookie_register(void)
+{
+	return NULL;
+}
+
+void dcookie_unregister(struct dcookie_user * user)
+{
+	return;
+}
+ 
+static inline int get_dcookie(struct dentry * dentry,
+	struct vfsmount * vfsmnt, unsigned long * cookie)
+{
+	return -ENOSYS;
+} 
+ 
+#endif /* CONFIG_PROFILING */
+ 
+#endif /* DCOOKIES_H */
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
new file mode 100644
index 000000000000..f7a7b86f6eef
--- /dev/null
+++ b/include/linux/debugfs.h
@@ -0,0 +1,92 @@
+/*
+ *  debugfs.h - a tiny little debug file system
+ *
+ *  Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *  Copyright (C) 2004 IBM Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ *
+ *  debugfs is for people to use instead of /proc or /sys.
+ *  See Documentation/DocBook/kernel-api for more details.
+ */
+
+#ifndef _DEBUGFS_H_
+#define _DEBUGFS_H_
+
+#include <linux/fs.h>
+
+#if defined(CONFIG_DEBUG_FS)
+struct dentry *debugfs_create_file(const char *name, mode_t mode,
+				   struct dentry *parent, void *data,
+				   struct file_operations *fops);
+
+struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+
+void debugfs_remove(struct dentry *dentry);
+
+struct dentry *debugfs_create_u8(const char *name, mode_t mode,
+				 struct dentry *parent, u8 *value);
+struct dentry *debugfs_create_u16(const char *name, mode_t mode,
+				  struct dentry *parent, u16 *value);
+struct dentry *debugfs_create_u32(const char *name, mode_t mode,
+				  struct dentry *parent, u32 *value);
+struct dentry *debugfs_create_bool(const char *name, mode_t mode,
+				  struct dentry *parent, u32 *value);
+
+#else
+/* 
+ * We do not return NULL from these functions if CONFIG_DEBUG_FS is not enabled
+ * so users have a chance to detect if there was a real error or not.  We don't
+ * want to duplicate the design decision mistakes of procfs and devfs again.
+ */
+
+static inline struct dentry *debugfs_create_file(const char *name, mode_t mode,
+						 struct dentry *parent,
+						 void *data,
+						 struct file_operations *fops)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_dir(const char *name,
+						struct dentry *parent)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void debugfs_remove(struct dentry *dentry)
+{ }
+
+static inline struct dentry *debugfs_create_u8(const char *name, mode_t mode,
+					       struct dentry *parent,
+					       u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u16(const char *name, mode_t mode,
+						struct dentry *parent,
+						u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u32(const char *name, mode_t mode,
+						struct dentry *parent,
+						u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
+						 struct dentry *parent,
+						 u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+#endif
diff --git a/include/linux/delay.h b/include/linux/delay.h
new file mode 100644
index 000000000000..acb74865b973
--- /dev/null
+++ b/include/linux/delay.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_DELAY_H
+#define _LINUX_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ */
+
+extern unsigned long loops_per_jiffy;
+
+#include <asm/delay.h>
+
+/*
+ * Using udelay() for intervals greater than a few milliseconds can
+ * risk overflow for high loops_per_jiffy (high bogomips) machines. The
+ * mdelay() provides a wrapper to prevent this.  For delays greater
+ * than MAX_UDELAY_MS milliseconds, the wrapper is used.  Architecture
+ * specific values can be defined in asm-???/delay.h as an override.
+ * The 2nd mdelay() definition ensures GCC will optimize away the 
+ * while loop for the common cases where n <= MAX_UDELAY_MS  --  Paul G.
+ */
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_MS	5
+#endif
+
+#ifdef notdef
+#define mdelay(n) (\
+	{unsigned long __ms=(n); while (__ms--) udelay(1000);})
+#else
+#define mdelay(n) (\
+	(__builtin_constant_p(n) && (n)<=MAX_UDELAY_MS) ? udelay((n)*1000) : \
+	({unsigned long __ms=(n); while (__ms--) udelay(1000);}))
+#endif
+
+#ifndef ndelay
+#define ndelay(x)	udelay(((x)+999)/1000)
+#endif
+
+void calibrate_delay(void);
+void msleep(unsigned int msecs);
+unsigned long msleep_interruptible(unsigned int msecs);
+
+static inline void ssleep(unsigned int seconds)
+{
+	msleep(seconds * 1000);
+}
+
+#endif /* defined(_LINUX_DELAY_H) */
diff --git a/include/linux/devfs_fs.h b/include/linux/devfs_fs.h
new file mode 100644
index 000000000000..de236f431877
--- /dev/null
+++ b/include/linux/devfs_fs.h
@@ -0,0 +1,41 @@
+#ifndef _LINUX_DEVFS_FS_H
+#define _LINUX_DEVFS_FS_H
+
+#include <linux/ioctl.h>
+
+#define DEVFSD_PROTOCOL_REVISION_KERNEL  5
+
+#define	DEVFSD_IOCTL_BASE	'd'
+
+/*  These are the various ioctls  */
+#define DEVFSDIOC_GET_PROTO_REV         _IOR(DEVFSD_IOCTL_BASE, 0, int)
+#define DEVFSDIOC_SET_EVENT_MASK        _IOW(DEVFSD_IOCTL_BASE, 2, int)
+#define DEVFSDIOC_RELEASE_EVENT_QUEUE   _IOW(DEVFSD_IOCTL_BASE, 3, int)
+#define DEVFSDIOC_SET_DEBUG_MASK        _IOW(DEVFSD_IOCTL_BASE, 4, int)
+
+#define DEVFSD_NOTIFY_REGISTERED    0
+#define DEVFSD_NOTIFY_UNREGISTERED  1
+#define DEVFSD_NOTIFY_ASYNC_OPEN    2
+#define DEVFSD_NOTIFY_CLOSE         3
+#define DEVFSD_NOTIFY_LOOKUP        4
+#define DEVFSD_NOTIFY_CHANGE        5
+#define DEVFSD_NOTIFY_CREATE        6
+#define DEVFSD_NOTIFY_DELETE        7
+
+#define DEVFS_PATHLEN               1024	/*  Never change this otherwise the
+						   binary interface will change   */
+
+struct devfsd_notify_struct {	/*  Use native C types to ensure same types in kernel and user space     */
+	unsigned int type;	/*  DEVFSD_NOTIFY_* value                   */
+	unsigned int mode;	/*  Mode of the inode or device entry       */
+	unsigned int major;	/*  Major number of device entry            */
+	unsigned int minor;	/*  Minor number of device entry            */
+	unsigned int uid;	/*  Uid of process, inode or device entry   */
+	unsigned int gid;	/*  Gid of process, inode or device entry   */
+	unsigned int overrun_count;	/*  Number of lost events                   */
+	unsigned int namelen;	/*  Number of characters not including '\0' */
+	/*  The device name MUST come last                                       */
+	char devname[DEVFS_PATHLEN];	/*  This will be '\0' terminated            */
+};
+
+#endif				/*  _LINUX_DEVFS_FS_H  */
diff --git a/include/linux/devfs_fs_kernel.h b/include/linux/devfs_fs_kernel.h
new file mode 100644
index 000000000000..89810e73d256
--- /dev/null
+++ b/include/linux/devfs_fs_kernel.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_DEVFS_FS_KERNEL_H
+#define _LINUX_DEVFS_FS_KERNEL_H
+
+#include <linux/fs.h>
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/semaphore.h>
+
+#define DEVFS_SUPER_MAGIC                0x1373
+
+#ifdef CONFIG_DEVFS_FS
+extern int devfs_mk_bdev(dev_t dev, umode_t mode, const char *fmt, ...)
+    __attribute__ ((format(printf, 3, 4)));
+extern int devfs_mk_cdev(dev_t dev, umode_t mode, const char *fmt, ...)
+    __attribute__ ((format(printf, 3, 4)));
+extern int devfs_mk_symlink(const char *name, const char *link);
+extern int devfs_mk_dir(const char *fmt, ...)
+    __attribute__ ((format(printf, 1, 2)));
+extern void devfs_remove(const char *fmt, ...)
+    __attribute__ ((format(printf, 1, 2)));
+extern int devfs_register_tape(const char *name);
+extern void devfs_unregister_tape(int num);
+extern void mount_devfs_fs(void);
+#else				/*  CONFIG_DEVFS_FS  */
+static inline int devfs_mk_bdev(dev_t dev, umode_t mode, const char *fmt, ...)
+{
+	return 0;
+}
+static inline int devfs_mk_cdev(dev_t dev, umode_t mode, const char *fmt, ...)
+{
+	return 0;
+}
+static inline int devfs_mk_symlink(const char *name, const char *link)
+{
+	return 0;
+}
+static inline int devfs_mk_dir(const char *fmt, ...)
+{
+	return 0;
+}
+static inline void devfs_remove(const char *fmt, ...)
+{
+}
+static inline int devfs_register_tape(const char *name)
+{
+	return -1;
+}
+static inline void devfs_unregister_tape(int num)
+{
+}
+static inline void mount_devfs_fs(void)
+{
+	return;
+}
+#endif				/*  CONFIG_DEVFS_FS  */
+#endif				/*  _LINUX_DEVFS_FS_KERNEL_H  */
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
new file mode 100644
index 000000000000..83c7d207b80e
--- /dev/null
+++ b/include/linux/device-mapper.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2001 Sistina Software (UK) Limited.
+ * Copyright (C) 2004 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DEVICE_MAPPER_H
+#define _LINUX_DEVICE_MAPPER_H
+
+struct dm_target;
+struct dm_table;
+struct dm_dev;
+
+typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t;
+
+union map_info {
+	void *ptr;
+	unsigned long long ll;
+};
+
+/*
+ * In the constructor the target parameter will already have the
+ * table, type, begin and len fields filled in.
+ */
+typedef int (*dm_ctr_fn) (struct dm_target *target,
+			  unsigned int argc, char **argv);
+
+/*
+ * The destructor doesn't need to free the dm_target, just
+ * anything hidden ti->private.
+ */
+typedef void (*dm_dtr_fn) (struct dm_target *ti);
+
+/*
+ * The map function must return:
+ * < 0: error
+ * = 0: The target will handle the io by resubmitting it later
+ * > 0: simple remap complete
+ */
+typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio,
+			  union map_info *map_context);
+
+/*
+ * Returns:
+ * < 0 : error (currently ignored)
+ * 0   : ended successfully
+ * 1   : for some reason the io has still not completed (eg,
+ *       multipath target might want to requeue a failed io).
+ */
+typedef int (*dm_endio_fn) (struct dm_target *ti,
+			    struct bio *bio, int error,
+			    union map_info *map_context);
+
+typedef void (*dm_presuspend_fn) (struct dm_target *ti);
+typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
+typedef void (*dm_resume_fn) (struct dm_target *ti);
+
+typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
+			     char *result, unsigned int maxlen);
+
+typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);
+
+void dm_error(const char *message);
+
+/*
+ * Constructors should call these functions to ensure destination devices
+ * are opened/closed correctly.
+ * FIXME: too many arguments.
+ */
+int dm_get_device(struct dm_target *ti, const char *path, sector_t start,
+		  sector_t len, int mode, struct dm_dev **result);
+void dm_put_device(struct dm_target *ti, struct dm_dev *d);
+
+/*
+ * Information about a target type
+ */
+struct target_type {
+	const char *name;
+	struct module *module;
+        unsigned version[3];
+	dm_ctr_fn ctr;
+	dm_dtr_fn dtr;
+	dm_map_fn map;
+	dm_endio_fn end_io;
+	dm_presuspend_fn presuspend;
+	dm_postsuspend_fn postsuspend;
+	dm_resume_fn resume;
+	dm_status_fn status;
+	dm_message_fn message;
+};
+
+struct io_restrictions {
+	unsigned short		max_sectors;
+	unsigned short		max_phys_segments;
+	unsigned short		max_hw_segments;
+	unsigned short		hardsect_size;
+	unsigned int		max_segment_size;
+	unsigned long		seg_boundary_mask;
+};
+
+struct dm_target {
+	struct dm_table *table;
+	struct target_type *type;
+
+	/* target limits */
+	sector_t begin;
+	sector_t len;
+
+	/* FIXME: turn this into a mask, and merge with io_restrictions */
+	/* Always a power of 2 */
+	sector_t split_io;
+
+	/*
+	 * These are automatically filled in by
+	 * dm_table_get_device.
+	 */
+	struct io_restrictions limits;
+
+	/* target specific data */
+	void *private;
+
+	/* Used to provide an error string from the ctr */
+	char *error;
+};
+
+int dm_register_target(struct target_type *t);
+int dm_unregister_target(struct target_type *t);
+
+#endif				/* _LINUX_DEVICE_MAPPER_H */
diff --git a/include/linux/device.h b/include/linux/device.h
new file mode 100644
index 000000000000..cf470459fa69
--- /dev/null
+++ b/include/linux/device.h
@@ -0,0 +1,426 @@
+/*
+ * device.h - generic, centralized driver model
+ *
+ * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
+ *
+ * This file is released under the GPLv2
+ *
+ * See Documentation/driver-model/ for more information.
+ */
+
+#ifndef _DEVICE_H_
+#define _DEVICE_H_
+
+#include <linux/config.h>
+#include <linux/ioport.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <asm/semaphore.h>
+#include <asm/atomic.h>
+
+#define DEVICE_NAME_SIZE	50
+#define DEVICE_NAME_HALF	__stringify(20)	/* Less than half to accommodate slop */
+#define DEVICE_ID_SIZE		32
+#define BUS_ID_SIZE		KOBJ_NAME_LEN
+
+
+enum {
+	SUSPEND_NOTIFY,
+	SUSPEND_SAVE_STATE,
+	SUSPEND_DISABLE,
+	SUSPEND_POWER_DOWN,
+};
+
+enum {
+	RESUME_POWER_ON,
+	RESUME_RESTORE_STATE,
+	RESUME_ENABLE,
+};
+
+struct device;
+struct device_driver;
+struct class;
+struct class_device;
+struct class_simple;
+
+struct bus_type {
+	char			* name;
+
+	struct subsystem	subsys;
+	struct kset		drivers;
+	struct kset		devices;
+
+	struct bus_attribute	* bus_attrs;
+	struct device_attribute	* dev_attrs;
+	struct driver_attribute	* drv_attrs;
+
+	int		(*match)(struct device * dev, struct device_driver * drv);
+	int		(*hotplug) (struct device *dev, char **envp, 
+				    int num_envp, char *buffer, int buffer_size);
+	int		(*suspend)(struct device * dev, pm_message_t state);
+	int		(*resume)(struct device * dev);
+};
+
+extern int bus_register(struct bus_type * bus);
+extern void bus_unregister(struct bus_type * bus);
+
+extern int bus_rescan_devices(struct bus_type * bus);
+
+extern struct bus_type * get_bus(struct bus_type * bus);
+extern void put_bus(struct bus_type * bus);
+
+extern struct bus_type * find_bus(char * name);
+
+/* iterator helpers for buses */
+
+int bus_for_each_dev(struct bus_type * bus, struct device * start, void * data,
+		     int (*fn)(struct device *, void *));
+
+int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, 
+		     void * data, int (*fn)(struct device_driver *, void *));
+
+
+/* driverfs interface for exporting bus attributes */
+
+struct bus_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct bus_type *, char * buf);
+	ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
+};
+
+#define BUS_ATTR(_name,_mode,_show,_store)	\
+struct bus_attribute bus_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+extern int bus_create_file(struct bus_type *, struct bus_attribute *);
+extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
+
+struct device_driver {
+	char			* name;
+	struct bus_type		* bus;
+
+	struct completion	unloaded;
+	struct kobject		kobj;
+	struct list_head	devices;
+
+	struct module 		* owner;
+
+	int	(*probe)	(struct device * dev);
+	int 	(*remove)	(struct device * dev);
+	void	(*shutdown)	(struct device * dev);
+	int	(*suspend)	(struct device * dev, pm_message_t state, u32 level);
+	int	(*resume)	(struct device * dev, u32 level);
+};
+
+
+extern int driver_register(struct device_driver * drv);
+extern void driver_unregister(struct device_driver * drv);
+
+extern struct device_driver * get_driver(struct device_driver * drv);
+extern void put_driver(struct device_driver * drv);
+extern struct device_driver *driver_find(const char *name, struct bus_type *bus);
+
+
+/* driverfs interface for exporting driver attributes */
+
+struct driver_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device_driver *, char * buf);
+	ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
+};
+
+#define DRIVER_ATTR(_name,_mode,_show,_store)	\
+struct driver_attribute driver_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+extern int driver_create_file(struct device_driver *, struct driver_attribute *);
+extern void driver_remove_file(struct device_driver *, struct driver_attribute *);
+
+
+/*
+ * device classes
+ */
+struct class {
+	char			* name;
+
+	struct subsystem	subsys;
+	struct list_head	children;
+	struct list_head	interfaces;
+	struct semaphore	sem;	/* locks both the children and interfaces lists */
+
+	struct class_attribute		* class_attrs;
+	struct class_device_attribute	* class_dev_attrs;
+
+	int	(*hotplug)(struct class_device *dev, char **envp, 
+			   int num_envp, char *buffer, int buffer_size);
+
+	void	(*release)(struct class_device *dev);
+	void	(*class_release)(struct class *class);
+};
+
+extern int class_register(struct class *);
+extern void class_unregister(struct class *);
+
+extern struct class * class_get(struct class *);
+extern void class_put(struct class *);
+
+
+struct class_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct class *, char * buf);
+	ssize_t (*store)(struct class *, const char * buf, size_t count);
+};
+
+#define CLASS_ATTR(_name,_mode,_show,_store)			\
+struct class_attribute class_attr_##_name = __ATTR(_name,_mode,_show,_store) 
+
+extern int class_create_file(struct class *, const struct class_attribute *);
+extern void class_remove_file(struct class *, const struct class_attribute *);
+
+
+struct class_device {
+	struct list_head	node;
+
+	struct kobject		kobj;
+	struct class		* class;	/* required */
+	dev_t			devt;		/* dev_t, creates the sysfs "dev" */
+	struct device		* dev;		/* not necessary, but nice to have */
+	void			* class_data;	/* class-specific data */
+
+	char	class_id[BUS_ID_SIZE];	/* unique to this class */
+};
+
+static inline void *
+class_get_devdata (struct class_device *dev)
+{
+	return dev->class_data;
+}
+
+static inline void
+class_set_devdata (struct class_device *dev, void *data)
+{
+	dev->class_data = data;
+}
+
+
+extern int class_device_register(struct class_device *);
+extern void class_device_unregister(struct class_device *);
+extern void class_device_initialize(struct class_device *);
+extern int class_device_add(struct class_device *);
+extern void class_device_del(struct class_device *);
+
+extern int class_device_rename(struct class_device *, char *);
+
+extern struct class_device * class_device_get(struct class_device *);
+extern void class_device_put(struct class_device *);
+
+struct class_device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct class_device *, char * buf);
+	ssize_t (*store)(struct class_device *, const char * buf, size_t count);
+};
+
+#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store)		\
+struct class_device_attribute class_device_attr_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+extern int class_device_create_file(struct class_device *, 
+				    const struct class_device_attribute *);
+extern void class_device_remove_file(struct class_device *, 
+				     const struct class_device_attribute *);
+extern int class_device_create_bin_file(struct class_device *,
+					struct bin_attribute *);
+extern void class_device_remove_bin_file(struct class_device *,
+					 struct bin_attribute *);
+
+struct class_interface {
+	struct list_head	node;
+	struct class		*class;
+
+	int (*add)	(struct class_device *);
+	void (*remove)	(struct class_device *);
+};
+
+extern int class_interface_register(struct class_interface *);
+extern void class_interface_unregister(struct class_interface *);
+
+/* interface for class simple stuff */
+extern struct class_simple *class_simple_create(struct module *owner, char *name);
+extern void class_simple_destroy(struct class_simple *cs);
+extern struct class_device *class_simple_device_add(struct class_simple *cs, dev_t dev, struct device *device, const char *fmt, ...)
+	__attribute__((format(printf,4,5)));
+extern int class_simple_set_hotplug(struct class_simple *, 
+	int (*hotplug)(struct class_device *dev, char **envp, int num_envp, char *buffer, int buffer_size));
+extern void class_simple_device_remove(dev_t dev);
+
+
+struct device {
+	struct list_head node;		/* node in sibling list */
+	struct list_head bus_list;	/* node in bus's list */
+	struct list_head driver_list;
+	struct list_head children;
+	struct device 	* parent;
+
+	struct kobject kobj;
+	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
+
+	struct bus_type	* bus;		/* type of bus device is on */
+	struct device_driver *driver;	/* which driver has allocated this
+					   device */
+	void		*driver_data;	/* data private to the driver */
+	void		*platform_data;	/* Platform specific data (e.g. ACPI,
+					   BIOS data relevant to device) */
+	struct dev_pm_info	power;
+
+	u32		detach_state;	/* State to enter when device is
+					   detached from its driver. */
+
+	u64		*dma_mask;	/* dma mask (if dma'able device) */
+	u64		coherent_dma_mask;/* Like dma_mask, but for
+					     alloc_coherent mappings as
+					     not all hardware supports
+					     64 bit addresses for consistent
+					     allocations such descriptors. */
+
+	struct list_head	dma_pools;	/* dma pools (if dma'ble) */
+
+	struct dma_coherent_mem	*dma_mem; /* internal for coherent mem
+					     override */
+
+	void	(*release)(struct device * dev);
+};
+
+static inline struct device *
+list_to_dev(struct list_head *node)
+{
+	return list_entry(node, struct device, node);
+}
+
+static inline void *
+dev_get_drvdata (struct device *dev)
+{
+	return dev->driver_data;
+}
+
+static inline void
+dev_set_drvdata (struct device *dev, void *data)
+{
+	dev->driver_data = data;
+}
+
+/*
+ * High level routines for use by the bus drivers
+ */
+extern int device_register(struct device * dev);
+extern void device_unregister(struct device * dev);
+extern void device_initialize(struct device * dev);
+extern int device_add(struct device * dev);
+extern void device_del(struct device * dev);
+extern int device_for_each_child(struct device *, void *,
+		     int (*fn)(struct device *, void *));
+
+/*
+ * Manual binding of a device to driver. See drivers/base/bus.c
+ * for information on use.
+ */
+extern int  driver_probe_device(struct device_driver * drv, struct device * dev);
+extern void device_bind_driver(struct device * dev);
+extern void device_release_driver(struct device * dev);
+extern int  device_attach(struct device * dev);
+extern void driver_attach(struct device_driver * drv);
+
+
+/* driverfs interface for exporting device attributes */
+
+struct device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device * dev, char * buf);
+	ssize_t (*store)(struct device * dev, const char * buf, size_t count);
+};
+
+#define DEVICE_ATTR(_name,_mode,_show,_store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+
+extern int device_create_file(struct device *device, struct device_attribute * entry);
+extern void device_remove_file(struct device * dev, struct device_attribute * attr);
+
+/*
+ * Platform "fixup" functions - allow the platform to have their say
+ * about devices and actions that the general device layer doesn't
+ * know about.
+ */
+/* Notify platform of device discovery */
+extern int (*platform_notify)(struct device * dev);
+
+extern int (*platform_notify_remove)(struct device * dev);
+
+
+/**
+ * get_device - atomically increment the reference count for the device.
+ *
+ */
+extern struct device * get_device(struct device * dev);
+extern void put_device(struct device * dev);
+extern struct device *device_find(const char *name, struct bus_type *bus);
+
+
+/* drivers/base/platform.c */
+
+struct platform_device {
+	char		* name;
+	u32		id;
+	struct device	dev;
+	u32		num_resources;
+	struct resource	* resource;
+};
+
+#define to_platform_device(x) container_of((x), struct platform_device, dev)
+
+extern int platform_device_register(struct platform_device *);
+extern void platform_device_unregister(struct platform_device *);
+
+extern struct bus_type platform_bus_type;
+extern struct device platform_bus;
+
+extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int);
+extern int platform_get_irq(struct platform_device *, unsigned int);
+extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, char *);
+extern int platform_get_irq_byname(struct platform_device *, char *);
+extern int platform_add_devices(struct platform_device **, int);
+
+extern struct platform_device *platform_device_register_simple(char *, unsigned int, struct resource *, unsigned int);
+
+/* drivers/base/power.c */
+extern void device_shutdown(void);
+
+
+/* drivers/base/firmware.c */
+extern int firmware_register(struct subsystem *);
+extern void firmware_unregister(struct subsystem *);
+
+/* debugging and troubleshooting/diagnostic helpers. */
+#define dev_printk(level, dev, format, arg...)	\
+	printk(level "%s %s: " format , (dev)->driver ? (dev)->driver->name : "" , (dev)->bus_id , ## arg)
+
+#ifdef DEBUG
+#define dev_dbg(dev, format, arg...)		\
+	dev_printk(KERN_DEBUG , dev , format , ## arg)
+#else
+#define dev_dbg(dev, format, arg...) do { (void)(dev); } while (0)
+#endif
+
+#define dev_err(dev, format, arg...)		\
+	dev_printk(KERN_ERR , dev , format , ## arg)
+#define dev_info(dev, format, arg...)		\
+	dev_printk(KERN_INFO , dev , format , ## arg)
+#define dev_warn(dev, format, arg...)		\
+	dev_printk(KERN_WARNING , dev , format , ## arg)
+
+/* Create alias, so I can be autoloaded. */
+#define MODULE_ALIAS_CHARDEV(major,minor) \
+	MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
+#define MODULE_ALIAS_CHARDEV_MAJOR(major) \
+	MODULE_ALIAS("char-major-" __stringify(major) "-*")
+#endif /* _DEVICE_H_ */
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
new file mode 100644
index 000000000000..b672ddc00735
--- /dev/null
+++ b/include/linux/devpts_fs.h
@@ -0,0 +1,34 @@
+/* -*- linux-c -*- --------------------------------------------------------- *
+ *
+ * linux/include/linux/devpts_fs.h
+ *
+ *  Copyright 1998-2004 H. Peter Anvin -- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ------------------------------------------------------------------------- */
+
+#ifndef _LINUX_DEVPTS_FS_H
+#define _LINUX_DEVPTS_FS_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_UNIX98_PTYS
+
+int devpts_pty_new(struct tty_struct *tty);      /* mknod in devpts */
+struct tty_struct *devpts_get_tty(int number);	 /* get tty structure */
+void devpts_pty_kill(int number);		 /* unlink */
+
+#else
+
+/* Dummy stubs in the no-pty case */
+static inline int devpts_pty_new(struct tty_struct *tty) { return -EINVAL; }
+static inline struct tty_struct *devpts_get_tty(int number) { return NULL; }
+static inline void devpts_pty_kill(int number) { }
+
+#endif
+
+
+#endif /* _LINUX_DEVPTS_FS_H */
diff --git a/include/linux/dio.h b/include/linux/dio.h
new file mode 100644
index 000000000000..fae9395fcf4f
--- /dev/null
+++ b/include/linux/dio.h
@@ -0,0 +1,312 @@
+/* header file for DIO boards for the HP300 architecture.
+ * Maybe this should handle DIO-II later?
+ * The general structure of this is vaguely based on how
+ * the Amiga port handles Zorro boards.
+ * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
+ * Converted to driver model Jochen Friedrich <jochen@scram.de>
+ *
+ * The board IDs are from the NetBSD kernel, which for once provided
+ * helpful comments...
+ *
+ * This goes with drivers/dio/dio.c
+ */
+
+#ifndef _LINUX_DIO_H
+#define _LINUX_DIO_H
+
+/* The DIO boards in a system are distinguished by 'select codes' which 
+ * range from 0-63 (DIO) and 132-255 (DIO-II). 
+ * The DIO board with select code sc is located at physical address 
+ *     0x600000 + sc * 0x10000
+ * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
+ * [0x800000-0x1000000) are for additional space required by things
+ * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
+ * On Linux, this is currently all mapped into the virtual address space
+ * at 0xf0000000 on bootup.
+ * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
+ * which is address range [0x1000000-0x20000000) -- too big to map completely,
+ * so currently we just don't handle DIO-II boards.  It wouldn't be hard to 
+ * do with ioremap() though.
+ */
+
+#include <linux/device.h>
+
+#ifdef __KERNEL__
+
+#include <asm/hp300hw.h>
+
+typedef __u16 dio_id;
+
+    /*
+     *  DIO devices
+     */
+
+struct dio_dev {
+	struct dio_bus *bus;
+	dio_id id;
+	int scode;
+	struct dio_driver *driver;	/* which driver has allocated this device */
+	struct device dev;		/* Generic device interface */
+	u8 ipl;
+	char name[64];
+	struct resource resource;
+};
+
+#define to_dio_dev(n) container_of(n, struct dio_dev, dev)
+
+    /*
+     *  DIO bus
+     */
+
+struct dio_bus {
+	struct list_head devices;           /* list of devices on this bus */
+	unsigned int num_resources;         /* number of resources */
+	struct resource resources[2];       /* address space routed to this bus */
+	struct device dev;
+	char name[10];
+};
+
+extern struct dio_bus dio_bus;      /* Single DIO bus */
+extern struct bus_type dio_bus_type;
+
+    /*
+     *  DIO device IDs
+     */
+
+struct dio_device_id {
+	dio_id id;                    /* Device ID or DIO_WILDCARD */
+	unsigned long driver_data;    /* Data private to the driver */
+};
+
+    /*
+     *  DIO device drivers
+     */
+
+struct dio_driver {
+	struct list_head node;
+	char *name;
+	const struct dio_device_id *id_table;     /* NULL if wants all devices */
+	int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
+/* New device inserted */
+	void (*remove)(struct dio_dev *z);        /* Device removed (NULL if not a hot-plug capable driver) */
+	struct device_driver driver;
+};
+
+#define to_dio_driver(drv)    container_of(drv, struct dio_driver, driver)
+
+/* DIO/DIO-II boards all have the following 8bit registers.
+ * These are offsets from the base of the device.
+ */
+#define DIO_IDOFF     0x01             /* primary device ID */
+#define DIO_IPLOFF    0x03             /* interrupt priority level */
+#define DIO_SECIDOFF  0x15             /* secondary device ID */
+#define DIOII_SIZEOFF 0x101            /* device size, DIO-II only */
+#define DIO_VIRADDRBASE 0xf0000000UL   /* vir addr where IOspace is mapped */
+
+#define DIO_BASE                0x600000        /* start of DIO space */
+#define DIO_END                 0x1000000       /* end of DIO space */
+#define DIO_DEVSIZE             0x10000         /* size of a DIO device */
+
+#define DIOII_BASE              0x01000000      /* start of DIO-II space */
+#define DIOII_END               0x20000000      /* end of DIO-II space */
+#define DIOII_DEVSIZE           0x00400000      /* size of a DIO-II device */
+
+/* Highest valid select code. If we add DIO-II support this should become
+ * 256 for everything except HP320, which only has DIO.
+ */
+#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
+#define DIOII_SCBASE 132 /* lowest DIO-II select code */
+#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
+#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
+
+/* macros to read device IDs, given base address */
+#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
+#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
+
+/* extract the interrupt level */
+#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
+
+/* find the size of a DIO-II board's address space.
+ * DIO boards are all fixed length.
+ */
+#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
+
+/* general purpose macro for both DIO and DIO-II */
+#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
+
+/* The hardware has primary and secondary IDs; we encode these in a single
+ * int as PRIMARY ID & (SECONDARY ID << 8).
+ * In practice this is only important for framebuffers,
+ * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
+ */
+#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
+/* macro to determine whether a given primary ID requires a secondary ID byte */
+#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
+#define DIO_WILDCARD 0xff
+
+/* Now a whole slew of macros giving device IDs and descriptive strings: */
+#define DIO_ID_DCA0     0x02 /* 98644A serial */
+#define DIO_DESC_DCA0 "98644A DCA0 serial"
+#define DIO_ID_DCA0REM  0x82 /* 98644A serial */
+#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
+#define DIO_ID_DCA1     0x42 /* 98644A serial */
+#define DIO_DESC_DCA1 "98644A DCA1 serial"
+#define DIO_ID_DCA1REM  0xc2 /* 98644A serial */
+#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
+#define DIO_ID_DCM      0x05 /* 98642A serial MUX */
+#define DIO_DESC_DCM "98642A DCM serial MUX"
+#define DIO_ID_DCMREM   0x85 /* 98642A serial MUX */
+#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
+#define DIO_ID_LAN      0x15 /* 98643A LAN */
+#define DIO_DESC_LAN "98643A LANCE ethernet"
+#define DIO_ID_FHPIB    0x08 /* 98625A/98625B fast HP-IB */
+#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
+#define DIO_ID_NHPIB    0x01 /* 98624A HP-IB (normal ie slow) */
+#define DIO_DESC_NHPIB "98624A HPIB"
+#define DIO_ID_SCSI0    0x07 /* 98265A SCSI */
+#define DIO_DESC_SCSI0 "98265A SCSI0"
+#define DIO_ID_SCSI1    0x27 /* ditto */
+#define DIO_DESC_SCSI1 "98265A SCSI1"
+#define DIO_ID_SCSI2    0x47 /* ditto */
+#define DIO_DESC_SCSI2 "98265A SCSI2"
+#define DIO_ID_SCSI3    0x67 /* ditto */
+#define DIO_DESC_SCSI3 "98265A SCSI3"
+#define DIO_ID_FBUFFER  0x39 /* framebuffer: flavour is distinguished by secondary ID */
+#define DIO_DESC_FBUFFER "bitmapped display"
+/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
+#define DIO_ID_MISC0    0x03 /* 98622A */
+#define DIO_DESC_MISC0 "98622A"
+#define DIO_ID_MISC1    0x04 /* 98623A */
+#define DIO_DESC_MISC1 "98623A"
+#define DIO_ID_PARALLEL 0x06 /* internal parallel */
+#define DIO_DESC_PARALLEL "internal parallel"
+#define DIO_ID_MISC2    0x09 /* 98287A keyboard */
+#define DIO_DESC_MISC2 "98287A keyboard"
+#define DIO_ID_MISC3    0x0a /* HP98635A FP accelerator */
+#define DIO_DESC_MISC3 "HP98635A FP accelerator"
+#define DIO_ID_MISC4    0x0b /* timer */
+#define DIO_DESC_MISC4 "timer"
+#define DIO_ID_MISC5    0x12 /* 98640A */
+#define DIO_DESC_MISC5 "98640A"
+#define DIO_ID_MISC6    0x16 /* 98659A */
+#define DIO_DESC_MISC6 "98659A"
+#define DIO_ID_MISC7    0x19 /* 237 display */
+#define DIO_DESC_MISC7 "237 display"
+#define DIO_ID_MISC8    0x1a /* quad-wide card */
+#define DIO_DESC_MISC8 "quad-wide card"
+#define DIO_ID_MISC9    0x1b /* 98253A */
+#define DIO_DESC_MISC9 "98253A"
+#define DIO_ID_MISC10   0x1c /* 98627A */
+#define DIO_DESC_MISC10 "98253A"
+#define DIO_ID_MISC11   0x1d /* 98633A */
+#define DIO_DESC_MISC11 "98633A"
+#define DIO_ID_MISC12   0x1e /* 98259A */
+#define DIO_DESC_MISC12 "98259A"
+#define DIO_ID_MISC13   0x1f /* 8741 */
+#define DIO_DESC_MISC13 "8741"
+#define DIO_ID_VME      0x31 /* 98577A VME adapter */
+#define DIO_DESC_VME "98577A VME adapter"
+#define DIO_ID_DCL      0x34 /* 98628A serial */
+#define DIO_DESC_DCL "98628A DCL serial"
+#define DIO_ID_DCLREM   0xb4 /* 98628A serial */
+#define DIO_DESC_DCLREM "98628A DCLREM serial"
+/* These are the secondary IDs for the framebuffers */
+#define DIO_ID2_GATORBOX    0x01 /* 98700/98710 "gatorbox" */
+#define DIO_DESC2_GATORBOX       "98700/98710 \"gatorbox\" display"
+#define DIO_ID2_TOPCAT      0x02 /* 98544/98545/98547 "topcat" */
+#define DIO_DESC2_TOPCAT         "98544/98545/98547 \"topcat\" display"
+#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
+#define DIO_DESC2_RENAISSANCE    "98720/98721 \"renaissance\" display"
+#define DIO_ID2_LRCATSEYE   0x05 /* lowres "catseye" */
+#define DIO_DESC2_LRCATSEYE      "low-res catseye display"
+#define DIO_ID2_HRCCATSEYE  0x06 /* highres colour "catseye" */
+#define DIO_DESC2_HRCCATSEYE     "high-res color catseye display"
+#define DIO_ID2_HRMCATSEYE  0x07 /* highres mono "catseye" */
+#define DIO_DESC2_HRMCATSEYE     "high-res mono catseye display"
+#define DIO_ID2_DAVINCI     0x08 /* 98730/98731 "davinci" */
+#define DIO_DESC2_DAVINCI        "98730/98731 \"davinci\" display"
+#define DIO_ID2_XXXCATSEYE  0x09 /* "catseye" */
+#define DIO_DESC2_XXXCATSEYE     "catseye display"
+#define DIO_ID2_HYPERION    0x0e /* A1096A "hyperion" */
+#define DIO_DESC2_HYPERION       "A1096A \"hyperion\" display"
+#define DIO_ID2_XGENESIS    0x0b /* "x-genesis"; no NetBSD support */
+#define DIO_DESC2_XGENESIS       "\"x-genesis\" display"
+#define DIO_ID2_TIGER       0x0c /* "tiger"; no NetBSD support */
+#define DIO_DESC2_TIGER          "\"tiger\" display"
+#define DIO_ID2_YGENESIS    0x0d /* "y-genesis"; no NetBSD support */
+#define DIO_DESC2_YGENESIS       "\"y-genesis\" display"
+/* if you add new IDs then you should tell dio.c about them so it can
+ * identify them...
+ */
+
+extern int dio_find(int deviceid);
+extern unsigned long dio_scodetophysaddr(int scode);
+extern void dio_create_sysfs_dev_files(struct dio_dev *);
+
+/* New-style probing */
+extern int dio_register_driver(struct dio_driver *);
+extern void dio_unregister_driver(struct dio_driver *);
+extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
+static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
+{
+    return d->driver;
+}
+
+#define dio_resource_start(d) ((d)->resource.start)
+#define dio_resource_end(d)   ((d)->resource.end)
+#define dio_resource_len(d)   ((d)->resource.end-(d)->resource.start+1)
+#define dio_resource_flags(d) ((d)->resource.flags)
+
+#define dio_request_device(d, name) \
+    request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
+#define dio_release_device(d) \
+    release_mem_region(dio_resource_start(d), dio_resource_len(d))
+
+/* Similar to the helpers above, these manipulate per-dio_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *dio_get_drvdata (struct dio_dev *d)
+{
+	return dev_get_drvdata(&d->dev);
+}
+
+static inline void dio_set_drvdata (struct dio_dev *d, void *data)
+{
+	dev_set_drvdata(&d->dev, data);
+}
+
+/*
+ * A helper function which helps ensure correct dio_driver
+ * setup and cleanup for commonly-encountered hotplug/modular cases
+ *
+ * This MUST stay in a header, as it checks for -DMODULE
+ */
+static inline int dio_module_init(struct dio_driver *drv)
+{
+	int rc = dio_register_driver(drv);
+
+	if (rc > 0)
+		return 0;
+
+	/* iff CONFIG_HOTPLUG and built into kernel, we should
+	 * leave the driver around for future hotplug events.
+	 * For the module case, a hotplug daemon of some sort
+	 * should load a module in response to an insert event. */
+#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
+	if (rc == 0)
+		return 0;
+#else
+	if (rc == 0)
+		rc = -ENODEV;
+#endif
+
+	/* if we get here, we need to clean up DIO driver instance
+	 * and return some sort of error */
+	dio_unregister_driver(drv);
+
+	return rc;
+}
+
+#endif /* __KERNEL__ */
+#endif /* ndef _LINUX_DIO_H */
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
new file mode 100644
index 000000000000..5d6023b87800
--- /dev/null
+++ b/include/linux/dirent.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_DIRENT_H
+#define _LINUX_DIRENT_H
+
+struct dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
+struct dirent64 {
+	__u64		d_ino;
+	__s64		d_off;
+	unsigned short	d_reclen;
+	unsigned char	d_type;
+	char		d_name[256];
+};
+
+#ifdef __KERNEL__
+
+struct linux_dirent64 {
+	u64		d_ino;
+	s64		d_off;
+	unsigned short	d_reclen;
+	unsigned char	d_type;
+	char		d_name[0];
+};
+
+#endif	/* __KERNEL__ */
+
+
+#endif
diff --git a/include/linux/divert.h b/include/linux/divert.h
new file mode 100644
index 000000000000..6919b09133d4
--- /dev/null
+++ b/include/linux/divert.h
@@ -0,0 +1,132 @@
+/*
+ * Frame Diversion, Benoit Locher <Benoit.Locher@skf.com>
+ *
+ * Changes:
+ * 		06/09/2000	BL:	initial version
+ * 
+ */
+ 
+#ifndef _LINUX_DIVERT_H
+#define _LINUX_DIVERT_H
+
+#include <asm/types.h>
+
+#define	MAX_DIVERT_PORTS	8	/* Max number of ports to divert (tcp, udp) */
+
+/* Divertable protocols */
+#define	DIVERT_PROTO_NONE	0x0000
+#define	DIVERT_PROTO_IP		0x0001
+#define	DIVERT_PROTO_ICMP	0x0002
+#define	DIVERT_PROTO_TCP	0x0004
+#define	DIVERT_PROTO_UDP	0x0008
+
+/*
+ *	This is an Ethernet Frame Diverter option block
+ */
+struct divert_blk
+{
+	int		divert;  /* are we active */
+	unsigned int protos;	/* protocols */
+	u16		tcp_dst[MAX_DIVERT_PORTS]; /* specific tcp dst ports to divert */
+	u16		tcp_src[MAX_DIVERT_PORTS]; /* specific tcp src ports to divert */
+	u16		udp_dst[MAX_DIVERT_PORTS]; /* specific udp dst ports to divert */
+	u16		udp_src[MAX_DIVERT_PORTS]; /* specific udp src ports to divert */
+};
+
+/*
+ * Diversion control block, for configuration with the userspace tool
+ * divert
+ */
+
+typedef union _divert_cf_arg
+{
+	s16		int16;
+	u16		uint16;
+	s32		int32;
+	u32		uint32;
+	s64		int64;
+	u64		uint64;
+	void	__user *ptr;
+} divert_cf_arg;
+
+
+struct divert_cf
+{
+	int	cmd;				/* Command */
+	divert_cf_arg 	arg1,
+					arg2,
+					arg3;
+	int	dev_index;	/* device index (eth0=0, etc...) */
+};
+
+
+/* Diversion commands */
+#define	DIVCMD_DIVERT			1 /* ENABLE/DISABLE diversion */
+#define	DIVCMD_IP				2 /* ENABLE/DISABLE whold IP diversion */
+#define	DIVCMD_TCP				3 /* ENABLE/DISABLE whold TCP diversion */
+#define	DIVCMD_TCPDST			4 /* ADD/REMOVE TCP DST port for diversion */
+#define	DIVCMD_TCPSRC			5 /* ADD/REMOVE TCP SRC port for diversion */
+#define	DIVCMD_UDP				6 /* ENABLE/DISABLE whole UDP diversion */
+#define	DIVCMD_UDPDST			7 /* ADD/REMOVE UDP DST port for diversion */
+#define	DIVCMD_UDPSRC			8 /* ADD/REMOVE UDP SRC port for diversion */
+#define	DIVCMD_ICMP				9 /* ENABLE/DISABLE whole ICMP diversion */
+#define	DIVCMD_GETSTATUS		10 /* GET the status of the diverter */
+#define	DIVCMD_RESET			11 /* Reset the diverter on the specified dev */
+#define DIVCMD_GETVERSION		12 /* Retrieve the diverter code version (char[32]) */
+
+/* General syntax of the commands:
+ * 
+ * DIVCMD_xxxxxx(arg1, arg2, arg3, dev_index)
+ * 
+ * SIOCSIFDIVERT:
+ *   DIVCMD_DIVERT(DIVARG1_ENABLE|DIVARG1_DISABLE, , ,ifindex)
+ *   DIVCMD_IP(DIVARG1_ENABLE|DIVARG1_DISABLE, , , ifindex)
+ *   DIVCMD_TCP(DIVARG1_ENABLE|DIVARG1_DISABLE, , , ifindex)
+ *   DIVCMD_TCPDST(DIVARG1_ADD|DIVARG1_REMOVE, port, , ifindex)
+ *   DIVCMD_TCPSRC(DIVARG1_ADD|DIVARG1_REMOVE, port, , ifindex)
+ *   DIVCMD_UDP(DIVARG1_ENABLE|DIVARG1_DISABLE, , , ifindex)
+ *   DIVCMD_UDPDST(DIVARG1_ADD|DIVARG1_REMOVE, port, , ifindex)
+ *   DIVCMD_UDPSRC(DIVARG1_ADD|DIVARG1_REMOVE, port, , ifindex)
+ *   DIVCMD_ICMP(DIVARG1_ENABLE|DIVARG1_DISABLE, , , ifindex)
+ *   DIVCMD_RESET(, , , ifindex)
+ *   
+ * SIOGIFDIVERT:
+ *   DIVCMD_GETSTATUS(divert_blk, , , ifindex)
+ *   DIVCMD_GETVERSION(string[3])
+ */
+
+
+/* Possible values for arg1 */
+#define	DIVARG1_ENABLE			0 /* ENABLE something */
+#define	DIVARG1_DISABLE			1 /* DISABLE something */
+#define DIVARG1_ADD				2 /* ADD something */
+#define DIVARG1_REMOVE			3 /* REMOVE something */
+
+
+#ifdef __KERNEL__
+
+/* diverter functions */
+#include <linux/skbuff.h>
+
+#ifdef CONFIG_NET_DIVERT
+#include <linux/netdevice.h>
+
+int alloc_divert_blk(struct net_device *);
+void free_divert_blk(struct net_device *);
+int divert_ioctl(unsigned int cmd, struct divert_cf __user *arg);
+void divert_frame(struct sk_buff *skb);
+static inline void handle_diverter(struct sk_buff *skb)
+{
+	/* if diversion is supported on device, then divert */
+	if (skb->dev->divert && skb->dev->divert->divert)
+		divert_frame(skb);
+}
+
+#else
+# define alloc_divert_blk(dev)		(0)
+# define free_divert_blk(dev)		do {} while (0)
+# define divert_ioctl(cmd, arg)		(-ENOPKG)
+# define handle_diverter(skb)		do {} while (0)
+#endif
+#endif 
+#endif	/* _LINUX_DIVERT_H */
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
new file mode 100644
index 000000000000..f5eb6b6cd109
--- /dev/null
+++ b/include/linux/dm-ioctl.h
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
+ * Copyright (C) 2004 - 2005 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DM_IOCTL_V4_H
+#define _LINUX_DM_IOCTL_V4_H
+
+#include <linux/types.h>
+
+#define DM_DIR "mapper"		/* Slashes not supported */
+#define DM_MAX_TYPE_NAME 16
+#define DM_NAME_LEN 128
+#define DM_UUID_LEN 129
+
+/*
+ * A traditional ioctl interface for the device mapper.
+ *
+ * Each device can have two tables associated with it, an
+ * 'active' table which is the one currently used by io passing
+ * through the device, and an 'inactive' one which is a table
+ * that is being prepared as a replacement for the 'active' one.
+ *
+ * DM_VERSION:
+ * Just get the version information for the ioctl interface.
+ *
+ * DM_REMOVE_ALL:
+ * Remove all dm devices, destroy all tables.  Only really used
+ * for debug.
+ *
+ * DM_LIST_DEVICES:
+ * Get a list of all the dm device names.
+ *
+ * DM_DEV_CREATE:
+ * Create a new device, neither the 'active' or 'inactive' table
+ * slots will be filled.  The device will be in suspended state
+ * after creation, however any io to the device will get errored
+ * since it will be out-of-bounds.
+ *
+ * DM_DEV_REMOVE:
+ * Remove a device, destroy any tables.
+ *
+ * DM_DEV_RENAME:
+ * Rename a device.
+ *
+ * DM_SUSPEND:
+ * This performs both suspend and resume, depending which flag is
+ * passed in.
+ * Suspend: This command will not return until all pending io to
+ * the device has completed.  Further io will be deferred until
+ * the device is resumed.
+ * Resume: It is no longer an error to issue this command on an
+ * unsuspended device.  If a table is present in the 'inactive'
+ * slot, it will be moved to the active slot, then the old table
+ * from the active slot will be _destroyed_.  Finally the device
+ * is resumed.
+ *
+ * DM_DEV_STATUS:
+ * Retrieves the status for the table in the 'active' slot.
+ *
+ * DM_DEV_WAIT:
+ * Wait for a significant event to occur to the device.  This
+ * could either be caused by an event triggered by one of the
+ * targets of the table in the 'active' slot, or a table change.
+ *
+ * DM_TABLE_LOAD:
+ * Load a table into the 'inactive' slot for the device.  The
+ * device does _not_ need to be suspended prior to this command.
+ *
+ * DM_TABLE_CLEAR:
+ * Destroy any table in the 'inactive' slot (ie. abort).
+ *
+ * DM_TABLE_DEPS:
+ * Return a set of device dependencies for the 'active' table.
+ *
+ * DM_TABLE_STATUS:
+ * Return the targets status for the 'active' table.
+ *
+ * DM_TARGET_MSG:
+ * Pass a message string to the target at a specific offset of a device.
+ */
+
+/*
+ * All ioctl arguments consist of a single chunk of memory, with
+ * this structure at the start.  If a uuid is specified any
+ * lookup (eg. for a DM_INFO) will be done on that, *not* the
+ * name.
+ */
+struct dm_ioctl {
+	/*
+	 * The version number is made up of three parts:
+	 * major - no backward or forward compatibility,
+	 * minor - only backwards compatible,
+	 * patch - both backwards and forwards compatible.
+	 *
+	 * All clients of the ioctl interface should fill in the
+	 * version number of the interface that they were
+	 * compiled with.
+	 *
+	 * All recognised ioctl commands (ie. those that don't
+	 * return -ENOTTY) fill out this field, even if the
+	 * command failed.
+	 */
+	uint32_t version[3];	/* in/out */
+	uint32_t data_size;	/* total size of data passed in
+				 * including this struct */
+
+	uint32_t data_start;	/* offset to start of data
+				 * relative to start of this struct */
+
+	uint32_t target_count;	/* in/out */
+	int32_t open_count;	/* out */
+	uint32_t flags;		/* in/out */
+	uint32_t event_nr;      	/* in/out */
+	uint32_t padding;
+
+	uint64_t dev;		/* in/out */
+
+	char name[DM_NAME_LEN];	/* device name */
+	char uuid[DM_UUID_LEN];	/* unique identifier for
+				 * the block device */
+};
+
+/*
+ * Used to specify tables.  These structures appear after the
+ * dm_ioctl.
+ */
+struct dm_target_spec {
+	uint64_t sector_start;
+	uint64_t length;
+	int32_t status;		/* used when reading from kernel only */
+
+	/*
+	 * Location of the next dm_target_spec.
+	 * - When specifying targets on a DM_TABLE_LOAD command, this value is
+	 *   the number of bytes from the start of the "current" dm_target_spec
+	 *   to the start of the "next" dm_target_spec.
+	 * - When retrieving targets on a DM_TABLE_STATUS command, this value
+	 *   is the number of bytes from the start of the first dm_target_spec
+	 *   (that follows the dm_ioctl struct) to the start of the "next"
+	 *   dm_target_spec.
+	 */
+	uint32_t next;
+
+	char target_type[DM_MAX_TYPE_NAME];
+
+	/*
+	 * Parameter string starts immediately after this object.
+	 * Be careful to add padding after string to ensure correct
+	 * alignment of subsequent dm_target_spec.
+	 */
+};
+
+/*
+ * Used to retrieve the target dependencies.
+ */
+struct dm_target_deps {
+	uint32_t count;	/* Array size */
+	uint32_t padding;	/* unused */
+	uint64_t dev[0];	/* out */
+};
+
+/*
+ * Used to get a list of all dm devices.
+ */
+struct dm_name_list {
+	uint64_t dev;
+	uint32_t next;		/* offset to the next record from
+				   the _start_ of this */
+	char name[0];
+};
+
+/*
+ * Used to retrieve the target versions
+ */
+struct dm_target_versions {
+        uint32_t next;
+        uint32_t version[3];
+
+        char name[0];
+};
+
+/*
+ * Used to pass message to a target
+ */
+struct dm_target_msg {
+	uint64_t sector;	/* Device sector */
+
+	char message[0];
+};
+
+/*
+ * If you change this make sure you make the corresponding change
+ * to dm-ioctl.c:lookup_ioctl()
+ */
+enum {
+	/* Top level cmds */
+	DM_VERSION_CMD = 0,
+	DM_REMOVE_ALL_CMD,
+	DM_LIST_DEVICES_CMD,
+
+	/* device level cmds */
+	DM_DEV_CREATE_CMD,
+	DM_DEV_REMOVE_CMD,
+	DM_DEV_RENAME_CMD,
+	DM_DEV_SUSPEND_CMD,
+	DM_DEV_STATUS_CMD,
+	DM_DEV_WAIT_CMD,
+
+	/* Table level cmds */
+	DM_TABLE_LOAD_CMD,
+	DM_TABLE_CLEAR_CMD,
+	DM_TABLE_DEPS_CMD,
+	DM_TABLE_STATUS_CMD,
+
+	/* Added later */
+	DM_LIST_VERSIONS_CMD,
+	DM_TARGET_MSG_CMD,
+};
+
+/*
+ * The dm_ioctl struct passed into the ioctl is just the header
+ * on a larger chunk of memory.  On x86-64 and other
+ * architectures the dm-ioctl struct will be padded to an 8 byte
+ * boundary so the size will be different, which would change the
+ * ioctl code - yes I really messed up.  This hack forces these
+ * architectures to have the correct ioctl code.
+ */
+#ifdef CONFIG_COMPAT
+typedef char ioctl_struct[308];
+#define DM_VERSION_32       _IOWR(DM_IOCTL, DM_VERSION_CMD, ioctl_struct)
+#define DM_REMOVE_ALL_32    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, ioctl_struct)
+#define DM_LIST_DEVICES_32  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, ioctl_struct)
+
+#define DM_DEV_CREATE_32    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, ioctl_struct)
+#define DM_DEV_REMOVE_32    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, ioctl_struct)
+#define DM_DEV_RENAME_32    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, ioctl_struct)
+#define DM_DEV_SUSPEND_32   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, ioctl_struct)
+#define DM_DEV_STATUS_32    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, ioctl_struct)
+#define DM_DEV_WAIT_32      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, ioctl_struct)
+
+#define DM_TABLE_LOAD_32    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, ioctl_struct)
+#define DM_TABLE_CLEAR_32   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, ioctl_struct)
+#define DM_TABLE_DEPS_32    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, ioctl_struct)
+#define DM_TABLE_STATUS_32  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, ioctl_struct)
+#define DM_LIST_VERSIONS_32 _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, ioctl_struct)
+#define DM_TARGET_MSG_32    _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, ioctl_struct)
+#endif
+
+#define DM_IOCTL 0xfd
+
+#define DM_VERSION       _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
+#define DM_REMOVE_ALL    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
+#define DM_LIST_DEVICES  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
+
+#define DM_DEV_CREATE    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
+#define DM_DEV_REMOVE    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
+#define DM_DEV_RENAME    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
+#define DM_DEV_SUSPEND   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
+#define DM_DEV_STATUS    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
+#define DM_DEV_WAIT      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
+
+#define DM_TABLE_LOAD    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
+#define DM_TABLE_CLEAR   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
+#define DM_TABLE_DEPS    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
+#define DM_TABLE_STATUS  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
+
+#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
+
+#define DM_TARGET_MSG	 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
+
+#define DM_VERSION_MAJOR	4
+#define DM_VERSION_MINOR	4
+#define DM_VERSION_PATCHLEVEL	0
+#define DM_VERSION_EXTRA	"-ioctl (2005-01-12)"
+
+/* Status bits */
+#define DM_READONLY_FLAG	(1 << 0) /* In/Out */
+#define DM_SUSPEND_FLAG		(1 << 1) /* In/Out */
+#define DM_PERSISTENT_DEV_FLAG	(1 << 3) /* In */
+
+/*
+ * Flag passed into ioctl STATUS command to get table information
+ * rather than current status.
+ */
+#define DM_STATUS_TABLE_FLAG	(1 << 4) /* In */
+
+/*
+ * Flags that indicate whether a table is present in either of
+ * the two table slots that a device has.
+ */
+#define DM_ACTIVE_PRESENT_FLAG   (1 << 5) /* Out */
+#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
+
+/*
+ * Indicates that the buffer passed in wasn't big enough for the
+ * results.
+ */
+#define DM_BUFFER_FULL_FLAG	(1 << 8) /* Out */
+
+/*
+ * Set this to improve performance when you aren't going to use open_count
+ */
+#define DM_SKIP_BDGET_FLAG	(1 << 9) /* In */
+
+#endif				/* _LINUX_DM_IOCTL_H */
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
new file mode 100644
index 000000000000..806c305332c1
--- /dev/null
+++ b/include/linux/dma-mapping.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_LINUX_DMA_MAPPING_H
+#define _ASM_LINUX_DMA_MAPPING_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+
+/* These definitions mirror those in pci.h, so they can be used
+ * interchangeably with their PCI_ counterparts */
+enum dma_data_direction {
+	DMA_BIDIRECTIONAL = 0,
+	DMA_TO_DEVICE = 1,
+	DMA_FROM_DEVICE = 2,
+	DMA_NONE = 3,
+};
+
+#define DMA_64BIT_MASK	0xffffffffffffffffULL
+#define DMA_32BIT_MASK	0x00000000ffffffffULL
+
+#include <asm/dma-mapping.h>
+
+/* Backwards compat, remove in 2.7.x */
+#define dma_sync_single		dma_sync_single_for_cpu
+#define dma_sync_sg		dma_sync_sg_for_cpu
+
+extern u64 dma_get_required_mask(struct device *dev);
+
+/* flags for the coherent memory api */
+#define	DMA_MEMORY_MAP			0x01
+#define DMA_MEMORY_IO			0x02
+#define DMA_MEMORY_INCLUDES_CHILDREN	0x04
+#define DMA_MEMORY_EXCLUSIVE		0x08
+
+#ifndef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+static inline int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags)
+{
+	return 0;
+}
+
+static inline void
+dma_release_declared_memory(struct device *dev)
+{
+}
+
+static inline void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size)
+{
+	return ERR_PTR(-EBUSY);
+}
+#endif
+
+#endif
+
+
diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h
new file mode 100644
index 000000000000..e60bfdac348d
--- /dev/null
+++ b/include/linux/dmapool.h
@@ -0,0 +1,27 @@
+/*
+ * include/linux/dmapool.h
+ *
+ * Allocation pools for DMAable (coherent) memory.
+ *
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef LINUX_DMAPOOL_H
+#define	LINUX_DMAPOOL_H
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+struct dma_pool *dma_pool_create(const char *name, struct device *dev, 
+			size_t size, size_t align, size_t allocation);
+
+void dma_pool_destroy(struct dma_pool *pool);
+
+void *dma_pool_alloc(struct dma_pool *pool, int mem_flags, dma_addr_t *handle);
+
+void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr);
+
+#endif
+
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
new file mode 100644
index 000000000000..d2bcf556088b
--- /dev/null
+++ b/include/linux/dmi.h
@@ -0,0 +1,47 @@
+#ifndef __DMI_H__
+#define __DMI_H__
+
+enum dmi_field {
+	DMI_NONE,
+	DMI_BIOS_VENDOR,
+	DMI_BIOS_VERSION,
+	DMI_BIOS_DATE,
+	DMI_SYS_VENDOR,
+	DMI_PRODUCT_NAME,
+	DMI_PRODUCT_VERSION,
+	DMI_BOARD_VENDOR,
+	DMI_BOARD_NAME,
+	DMI_BOARD_VERSION,
+	DMI_STRING_MAX,
+};
+
+/*
+ *	DMI callbacks for problem boards
+ */
+struct dmi_strmatch {
+	u8 slot;
+	char *substr;
+};
+
+struct dmi_system_id {
+	int (*callback)(struct dmi_system_id *);
+	char *ident;
+	struct dmi_strmatch matches[4];
+	void *driver_data;
+};
+
+#define DMI_MATCH(a,b)	{ a, b }
+
+#if defined(CONFIG_X86) && !defined(CONFIG_X86_64)
+
+extern int dmi_check_system(struct dmi_system_id *list);
+extern char * dmi_get_system_info(int field);
+
+#else
+
+static inline int dmi_check_system(struct dmi_system_id *list) { return 0; }
+static inline char * dmi_get_system_info(int field) { return NULL; }
+
+#endif
+
+#endif	/* __DMI_H__ */
diff --git a/include/linux/dn.h b/include/linux/dn.h
new file mode 100644
index 000000000000..782cae49e64c
--- /dev/null
+++ b/include/linux/dn.h
@@ -0,0 +1,147 @@
+#ifndef _LINUX_DN_H
+#define _LINUX_DN_H
+
+/*
+
+	DECnet Data Structures and Constants
+
+*/
+
+/* 
+ * DNPROTO_NSP can't be the same as SOL_SOCKET, 
+ * so increment each by one (compared to ULTRIX)
+ */
+#define DNPROTO_NSP     2                       /* NSP protocol number       */
+#define DNPROTO_ROU     3                       /* Routing protocol number   */
+#define DNPROTO_NML     4                       /* Net mgt protocol number   */
+#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
+#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
+#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
+
+
+#define DN_ADDL		2
+#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
+#define DN_MAXOPTL	16
+#define DN_MAXOBJL	16
+#define DN_MAXACCL	40
+#define DN_MAXALIASL	128
+#define DN_MAXNODEL	256
+#define DNBUFSIZE	65023
+
+/* 
+ * SET/GET Socket options  - must match the DSO_ numbers below
+ */
+#define SO_CONDATA      1
+#define SO_CONACCESS    2
+#define SO_PROXYUSR     3
+#define SO_LINKINFO     7
+
+#define DSO_CONDATA     1        /* Set/Get connect data                */
+#define DSO_DISDATA     10       /* Set/Get disconnect data             */
+#define DSO_CONACCESS   2        /* Set/Get connect access data         */
+#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
+#define DSO_CONACCEPT   5        /* Accept deferred connection          */
+#define DSO_CONREJECT   6        /* Reject deferred connection          */
+#define DSO_LINKINFO    7        /* Set/Get link information            */
+#define DSO_STREAM      8        /* Set socket type to stream           */
+#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
+#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
+#define DSO_NODELAY	12       /* Turn off nagle                      */
+#define DSO_CORK        13       /* Wait for more data!                 */
+#define DSO_SERVICES	14       /* NSP Services field                  */
+#define DSO_INFO	15       /* NSP Info field                      */
+#define DSO_MAX         15       /* Maximum option number               */
+
+
+/* LINK States */
+#define LL_INACTIVE	0
+#define LL_CONNECTING	1
+#define LL_RUNNING	2
+#define LL_DISCONNECTING 3
+
+#define ACC_IMMED 0
+#define ACC_DEFER 1
+
+#define SDF_WILD        1                  /* Wild card object          */
+#define SDF_PROXY       2                  /* Addr eligible for proxy   */
+#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
+
+/* Structures */
+
+
+struct dn_naddr 
+{
+	unsigned short		a_len;
+	unsigned char a_addr[DN_MAXADDL];
+};
+
+struct sockaddr_dn
+{
+	unsigned short		sdn_family;
+	unsigned char		sdn_flags;
+	unsigned char		sdn_objnum;
+	unsigned short		sdn_objnamel;
+	unsigned char		sdn_objname[DN_MAXOBJL];
+	struct   dn_naddr	sdn_add;
+};
+#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
+#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
+
+
+
+/*
+ * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
+ */
+struct optdata_dn {
+        unsigned short  opt_status;     /* Extended status return */
+#define opt_sts opt_status
+        unsigned short  opt_optl;       /* Length of user data    */
+        unsigned char   opt_data[16];   /* User data              */
+};
+
+struct accessdata_dn
+{
+	unsigned char		acc_accl;
+	unsigned char		acc_acc[DN_MAXACCL];
+	unsigned char 		acc_passl;
+	unsigned char		acc_pass[DN_MAXACCL];
+	unsigned char 		acc_userl;
+	unsigned char		acc_user[DN_MAXACCL];
+};
+
+/*
+ * DECnet logical link information structure
+ */
+struct linkinfo_dn {
+        unsigned short  idn_segsize;    /* Segment size for link */
+        unsigned char   idn_linkstate;  /* Logical link state    */
+};
+
+/*
+ * Ethernet address format (for DECnet)
+ */
+union etheraddress {
+        unsigned char dne_addr[6];             /* Full ethernet address */
+  struct {
+                unsigned char dne_hiord[4];    /* DECnet HIORD prefix   */
+                unsigned char dne_nodeaddr[2]; /* DECnet node address   */
+  } dne_remote;
+};
+
+
+/*
+ * DECnet physical socket address format
+ */
+struct dn_addr {
+        unsigned short dna_family;      /* AF_DECnet               */
+        union etheraddress dna_netaddr; /* DECnet ethernet address */
+};
+
+#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
+
+#define SIOCSNETADDR  _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
+#define SIOCGNETADDR  _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
+#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
+#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
+
+#endif /* _LINUX_DN_H */
diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h
new file mode 100644
index 000000000000..f134a01975c7
--- /dev/null
+++ b/include/linux/dnotify.h
@@ -0,0 +1,63 @@
+#ifndef _LINUX_DNOTIFY_H
+#define _LINUX_DNOTIFY_H
+/*
+ * Directory notification for Linux
+ *
+ * Copyright (C) 2000,2002 Stephen Rothwell
+ */
+
+#include <linux/fs.h>
+
+struct dnotify_struct {
+	struct dnotify_struct *	dn_next;
+	unsigned long		dn_mask;
+	int			dn_fd;
+	struct file *		dn_filp;
+	fl_owner_t		dn_owner;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DNOTIFY
+
+extern void __inode_dir_notify(struct inode *, unsigned long);
+extern void dnotify_flush(struct file *, fl_owner_t);
+extern int fcntl_dirnotify(int, struct file *, unsigned long);
+extern void dnotify_parent(struct dentry *, unsigned long);
+
+static inline void inode_dir_notify(struct inode *inode, unsigned long event)
+{
+	if (inode->i_dnotify_mask & (event))
+		__inode_dir_notify(inode, event);
+}
+
+#else
+
+static inline void __inode_dir_notify(struct inode *inode, unsigned long event)
+{
+}
+
+static inline void dnotify_flush(struct file *filp, fl_owner_t id)
+{
+}
+
+static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
+{
+	return -EINVAL;
+}
+
+static inline void dnotify_parent(struct dentry *dentry, unsigned long event)
+{
+}
+
+static inline void inode_dir_notify(struct inode *inode, unsigned long event)
+{
+}
+
+#endif /* CONFIG_DNOTIFY */
+
+#endif /* __KERNEL __ */
+
+#endif /* _LINUX_DNOTIFY_H */
diff --git a/include/linux/dqblk_v1.h b/include/linux/dqblk_v1.h
new file mode 100644
index 000000000000..42fbf4797156
--- /dev/null
+++ b/include/linux/dqblk_v1.h
@@ -0,0 +1,18 @@
+/*
+ *	File with in-memory structures of old quota format
+ */
+
+#ifndef _LINUX_DQBLK_V1_H
+#define _LINUX_DQBLK_V1_H
+
+/* Id of quota format */
+#define QFMT_VFS_OLD 1
+
+/* Root squash turned on */
+#define V1_DQF_RSQUASH 1
+
+/* Special information about quotafile */
+struct v1_mem_dqinfo {
+};
+
+#endif	/* _LINUX_DQBLK_V1_H */
diff --git a/include/linux/dqblk_v2.h b/include/linux/dqblk_v2.h
new file mode 100644
index 000000000000..4a6c5f6867bb
--- /dev/null
+++ b/include/linux/dqblk_v2.h
@@ -0,0 +1,20 @@
+/*
+ *	Definitions of structures for vfsv0 quota format
+ */
+
+#ifndef _LINUX_DQBLK_V2_H
+#define _LINUX_DQBLK_V2_H
+
+#include <linux/types.h>
+
+/* id numbers of quota format */
+#define QFMT_VFS_V0 2
+
+/* Inmemory copy of version specific information */
+struct v2_mem_dqinfo {
+	unsigned int dqi_blocks;
+	unsigned int dqi_free_blk;
+	unsigned int dqi_free_entry;
+};
+
+#endif /* _LINUX_DQBLK_V2_H */
diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h
new file mode 100644
index 000000000000..cb31719ee192
--- /dev/null
+++ b/include/linux/dqblk_xfs.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ * USA
+ *
+ * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
+ * Mountain View, CA 94043, USA, or: http://www.sgi.com
+ */
+#ifndef _LINUX_DQBLK_XFS_H
+#define _LINUX_DQBLK_XFS_H
+
+#include <linux/types.h>
+
+/*
+ * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
+ */
+
+#define XQM_CMD(x)	(('X'<<8)+(x))	/* note: forms first QCMD argument */
+#define XQM_COMMAND(x)	(((x) & (0xff<<8)) == ('X'<<8))	/* test if for XFS */
+
+#define XQM_USRQUOTA	0	/* system call user quota type */
+#define XQM_GRPQUOTA	1	/* system call group quota type */
+#define XQM_MAXQUOTAS	2
+
+#define Q_XQUOTAON	XQM_CMD(1)	/* enable accounting/enforcement */
+#define Q_XQUOTAOFF	XQM_CMD(2)	/* disable accounting/enforcement */
+#define Q_XGETQUOTA	XQM_CMD(3)	/* get disk limits and usage */
+#define Q_XSETQLIM	XQM_CMD(4)	/* set disk limits */
+#define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
+#define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
+
+/*
+ * fs_disk_quota structure:
+ *
+ * This contains the current quota information regarding a user/proj/group.
+ * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
+ * 512 bytes.
+ */
+#define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
+typedef struct fs_disk_quota {
+	__s8		d_version;	/* version of this structure */
+	__s8		d_flags;	/* XFS_{USER,PROJ,GROUP}_QUOTA */
+	__u16		d_fieldmask;	/* field specifier */
+	__u32		d_id;		/* user, project, or group ID */
+	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
+	__u64		d_blk_softlimit;/* preferred limit on disk blks */
+	__u64		d_ino_hardlimit;/* maximum # allocated inodes */
+	__u64		d_ino_softlimit;/* preferred inode limit */
+	__u64		d_bcount;	/* # disk blocks owned by the user */
+	__u64		d_icount;	/* # inodes owned by the user */
+	__s32		d_itimer;	/* zero if within inode limits */
+					/* if not, we refuse service */
+	__s32		d_btimer;	/* similar to above; for disk blocks */
+	__u16	  	d_iwarns;       /* # warnings issued wrt num inodes */
+	__u16	  	d_bwarns;       /* # warnings issued wrt disk blocks */
+	__s32		d_padding2;	/* padding2 - for future use */
+	__u64		d_rtb_hardlimit;/* absolute limit on realtime blks */
+	__u64		d_rtb_softlimit;/* preferred limit on RT disk blks */
+	__u64		d_rtbcount;	/* # realtime blocks owned */
+	__s32		d_rtbtimer;	/* similar to above; for RT disk blks */
+	__u16	  	d_rtbwarns;     /* # warnings issued wrt RT disk blks */
+	__s16		d_padding3;	/* padding3 - for future use */	
+	char		d_padding4[8];	/* yet more padding */
+} fs_disk_quota_t;
+
+/*
+ * These fields are sent to Q_XSETQLIM to specify fields that need to change.
+ */
+#define FS_DQ_ISOFT	(1<<0)
+#define FS_DQ_IHARD	(1<<1)
+#define FS_DQ_BSOFT	(1<<2)
+#define FS_DQ_BHARD 	(1<<3)
+#define FS_DQ_RTBSOFT	(1<<4)
+#define FS_DQ_RTBHARD	(1<<5)
+#define FS_DQ_LIMIT_MASK	(FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
+				 FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
+/*
+ * These timers can only be set in super user's dquot. For others, timers are
+ * automatically started and stopped. Superusers timer values set the limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}TIMELIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BTIMER	(1<<6)
+#define FS_DQ_ITIMER	(1<<7)
+#define FS_DQ_RTBTIMER 	(1<<8)
+#define FS_DQ_TIMER_MASK	(FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
+
+/*
+ * Warning counts are set in both super user's dquot and others. For others,
+ * warnings are set/cleared by the administrators (or automatically by going
+ * below the soft limit).  Superusers warning values set the warning limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}WARNLIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BWARNS	(1<<9)
+#define FS_DQ_IWARNS	(1<<10)
+#define FS_DQ_RTBWARNS	(1<<11)
+#define FS_DQ_WARNS_MASK	(FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
+
+/*
+ * Various flags related to quotactl(2).  Only relevant to XFS filesystems.
+ */
+#define XFS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
+#define XFS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
+#define XFS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
+#define XFS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
+#define XFS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
+#define XFS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
+
+#define XFS_USER_QUOTA		(1<<0)	/* user quota type */
+#define XFS_PROJ_QUOTA		(1<<1)	/* project quota type */
+#define XFS_GROUP_QUOTA		(1<<2)	/* group quota type */
+
+/*
+ * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
+ * Provides a centralized way to get meta infomation about the quota subsystem.
+ * eg. space taken up for user and group quotas, number of dquots currently
+ * incore.
+ */
+#define FS_QSTAT_VERSION	1	/* fs_quota_stat.qs_version */
+
+/*
+ * Some basic infomation about 'quota files'.
+ */
+typedef struct fs_qfilestat {
+	__u64		qfs_ino;	/* inode number */
+	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
+	__u32		qfs_nextents;	/* number of extents */
+} fs_qfilestat_t;
+
+typedef struct fs_quota_stat {
+	__s8		qs_version;	/* version number for future changes */
+	__u16		qs_flags;	/* XFS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
+	__s8		qs_pad;		/* unused */
+	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
+	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
+	__u32		qs_incoredqs;	/* number of dquots incore */
+	__s32		qs_btimelimit;  /* limit for blks timer */	
+	__s32		qs_itimelimit;  /* limit for inodes timer */	
+	__s32		qs_rtbtimelimit;/* limit for rt blks timer */	
+	__u16		qs_bwarnlimit;	/* limit for num warnings */
+	__u16		qs_iwarnlimit;	/* limit for num warnings */
+} fs_quota_stat_t;
+
+#endif	/* _LINUX_DQBLK_XFS_H */
diff --git a/include/linux/ds1286.h b/include/linux/ds1286.h
new file mode 100644
index 000000000000..d8989860e4ce
--- /dev/null
+++ b/include/linux/ds1286.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __LINUX_DS1286_H
+#define __LINUX_DS1286_H
+
+#include <asm/ds1286.h>
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_HUNDREDTH_SECOND	0
+#define RTC_SECONDS		1
+#define RTC_MINUTES		2
+#define RTC_MINUTES_ALARM	3
+#define RTC_HOURS		4
+#define RTC_HOURS_ALARM		5
+#define RTC_DAY			6
+#define RTC_DAY_ALARM		7
+#define RTC_DATE		8
+#define RTC_MONTH		9
+#define RTC_YEAR		10
+#define RTC_CMD			11
+#define RTC_WHSEC		12
+#define RTC_WSEC		13
+#define RTC_UNUSED		14
+
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE 	0xC0
+
+
+/*
+ * Bits in the month register
+ */
+#define RTC_EOSC		0x80
+#define RTC_ESQW		0x40
+
+/*
+ * Bits in the Command register
+ */
+#define RTC_TDF			0x01
+#define RTC_WAF			0x02
+#define RTC_TDM			0x04
+#define RTC_WAM			0x08
+#define RTC_PU_LVL		0x10
+#define RTC_IBH_LO		0x20
+#define RTC_IPSW		0x40
+#define RTC_TE			0x80
+
+#endif /* __LINUX_DS1286_H */
diff --git a/include/linux/dtlk.h b/include/linux/dtlk.h
new file mode 100644
index 000000000000..2896d90118a9
--- /dev/null
+++ b/include/linux/dtlk.h
@@ -0,0 +1,104 @@
+#if 0
+
+#define TRACE_TXT(text) \
+	{ \
+	  if(dtlk_trace) \
+	  { \
+	    console_print(text); \
+	    console_print("\n"); \
+	  } \
+	}
+
+#define TRACE_CHR(chr) \
+	{ \
+	  if(dtlk_trace) \
+	    console_print(chr); \
+	} \
+
+#endif
+
+#define DTLK_MINOR	0
+#define DTLK_IO_EXTENT	0x02
+
+	/* ioctl's use magic number of 0xa3 */
+#define DTLK_INTERROGATE 0xa390	/* get settings from the DoubleTalk */
+#define DTLK_STATUS 0xa391	/* get status from the DoubleTalk */
+
+
+#define DTLK_CLEAR 0x18		/* stops speech */
+
+#define DTLK_MAX_RETRIES (loops_per_jiffy/(10000/HZ))
+
+	/* TTS Port Status Flags */
+#define TTS_READABLE     0x80	/* mask for bit which is nonzero if a
+				   byte can be read from the TTS port */
+#define TTS_SPEAKING     0x40	/* mask for SYNC bit, which is nonzero
+				   while DoubleTalk is producing
+				   output with TTS, PCM or CVSD
+				   synthesizers or tone generators
+				   (that is, all but LPC) */
+#define TTS_SPEAKING2    0x20	/* mask for SYNC2 bit,
+				   which falls to zero up to 0.4 sec
+				   before speech stops */
+#define TTS_WRITABLE     0x10	/* mask for RDY bit, which when set to
+             			   1, indicates the TTS port is ready
+             			   to accept a byte of data.  The RDY
+             			   bit goes zero 2-3 usec after
+             			   writing, and goes 1 again 180-190
+             			   usec later. */
+#define TTS_ALMOST_FULL  0x08	/* mask for AF bit: When set to 1,
+				   indicates that less than 300 free
+				   bytes are available in the TTS
+				   input buffer. AF is always 0 in the
+				   PCM, TGN and CVSD modes. */
+#define TTS_ALMOST_EMPTY 0x04	/* mask for AE bit: When set to 1,
+				   indicates that less than 300 bytes
+				   of data remain in DoubleTalk's
+				   input (TTS or PCM) buffer. AE is
+				   always 1 in the TGN and CVSD
+				   modes. */
+
+	/* LPC speak commands */
+#define LPC_5220_NORMAL 0x60	/* 5220 format decoding table, normal rate */
+#define LPC_5220_FAST 0x64	/* 5220 format decoding table, fast rate */
+#define LPC_D6_NORMAL 0x20	/* D6 format decoding table, normal rate */
+#define LPC_D6_FAST 0x24	/* D6 format decoding table, fast rate */
+
+	/* LPC Port Status Flags (valid only after one of the LPC
+           speak commands) */
+#define LPC_SPEAKING     0x80	/* mask for TS bit: When set to 1,
+				   indicates the LPC synthesizer is
+				   producing speech.*/
+#define LPC_BUFFER_LOW   0x40	/* mask for BL bit: When set to 1,
+				   indicates that the hardware LPC
+				   data buffer has less than 30 bytes
+				   remaining. (Total internal buffer
+				   size = 4096 bytes.) */
+#define LPC_BUFFER_EMPTY 0x20	/* mask for BE bit: When set to 1,
+				   indicates that the LPC data buffer
+				   ran out of data (error condition if
+				   TS is also 1).  */
+
+				/* data returned by Interrogate command */
+struct dtlk_settings
+{
+  unsigned short serial_number;	/* 0-7Fh:0-7Fh */
+  unsigned char rom_version[24]; /* null terminated string */
+  unsigned char mode;		/* 0=Character; 1=Phoneme; 2=Text */
+  unsigned char punc_level;	/* nB; 0-7 */
+  unsigned char formant_freq;	/* nF; 0-9 */
+  unsigned char pitch;		/* nP; 0-99 */
+  unsigned char speed;		/* nS; 0-9 */
+  unsigned char volume;		/* nV; 0-9 */
+  unsigned char tone;		/* nX; 0-2 */
+  unsigned char expression;	/* nE; 0-9 */
+  unsigned char ext_dict_loaded; /* 1=exception dictionary loaded */
+  unsigned char ext_dict_status; /* 1=exception dictionary enabled */
+  unsigned char free_ram;	/* # pages (truncated) remaining for
+                                   text buffer */
+  unsigned char articulation;	/* nA; 0-9 */
+  unsigned char reverb;		/* nR; 0-9 */
+  unsigned char eob;		/* 7Fh value indicating end of
+                                   parameter block */
+  unsigned char has_indexing;	/* nonzero if indexing is implemented */
+};
diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h
new file mode 100644
index 000000000000..cc314443f1c4
--- /dev/null
+++ b/include/linux/dvb/audio.h
@@ -0,0 +1,124 @@
+/*
+ * audio.h
+ *
+ * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBAUDIO_H_
+#define _DVBAUDIO_H_
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+
+typedef enum {
+        AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */
+	AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */
+} audio_stream_source_t;
+
+
+typedef enum {
+	AUDIO_STOPPED,      /* Device is stopped */
+        AUDIO_PLAYING,      /* Device is currently playing */
+	AUDIO_PAUSED        /* Device is paused */
+} audio_play_state_t;
+
+
+typedef enum {
+        AUDIO_STEREO,
+        AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT
+} audio_channel_select_t;
+
+
+typedef struct audio_mixer {
+        unsigned int volume_left;
+        unsigned int volume_right;
+  // what else do we need? bass, pass-through, ...
+} audio_mixer_t;
+
+
+typedef struct audio_status {
+        int                    AV_sync_state;  /* sync audio and video? */
+        int                    mute_state;     /* audio is muted */
+        audio_play_state_t     play_state;     /* current playback state */
+        audio_stream_source_t  stream_source;  /* current stream source */
+        audio_channel_select_t channel_select; /* currently selected channel */
+        int                    bypass_mode;    /* pass on audio data to */
+	audio_mixer_t	       mixer_state;    /* current mixer state */
+} audio_status_t;                              /* separate decoder hardware */
+
+
+typedef
+struct audio_karaoke{  /* if Vocal1 or Vocal2 are non-zero, they get mixed  */
+	int vocal1;    /* into left and right t at 70% each */
+	int vocal2;    /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/
+	int melody;    /* mixed into the left channel and */
+                       /* Vocal2 into the right channel at 100% each. */
+                       /* if Melody is non-zero, the melody channel gets mixed*/
+} audio_karaoke_t;     /* into left and right  */
+
+
+typedef uint16_t audio_attributes_t;
+/*   bits: descr. */
+/*   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */
+/*   12    multichannel extension */
+/*   11-10 audio type (0=not spec, 1=language included) */
+/*    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */
+/*    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  */
+/*    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */
+/*    2- 0 number of audio channels (n+1 channels) */
+
+
+/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */
+#define AUDIO_CAP_DTS    1
+#define AUDIO_CAP_LPCM   2
+#define AUDIO_CAP_MP1    4
+#define AUDIO_CAP_MP2    8
+#define AUDIO_CAP_MP3   16
+#define AUDIO_CAP_AAC   32
+#define AUDIO_CAP_OGG   64
+#define AUDIO_CAP_SDDS 128
+#define AUDIO_CAP_AC3  256
+
+#define AUDIO_STOP                 _IO('o', 1)
+#define AUDIO_PLAY                 _IO('o', 2)
+#define AUDIO_PAUSE                _IO('o', 3)
+#define AUDIO_CONTINUE             _IO('o', 4)
+#define AUDIO_SELECT_SOURCE        _IO('o', 5)
+#define AUDIO_SET_MUTE             _IO('o', 6)
+#define AUDIO_SET_AV_SYNC          _IO('o', 7)
+#define AUDIO_SET_BYPASS_MODE      _IO('o', 8)
+#define AUDIO_CHANNEL_SELECT       _IO('o', 9)
+#define AUDIO_GET_STATUS           _IOR('o', 10, audio_status_t)
+
+#define AUDIO_GET_CAPABILITIES     _IOR('o', 11, unsigned int)
+#define AUDIO_CLEAR_BUFFER         _IO('o',  12)
+#define AUDIO_SET_ID               _IO('o', 13)
+#define AUDIO_SET_MIXER            _IOW('o', 14, audio_mixer_t)
+#define AUDIO_SET_STREAMTYPE       _IO('o', 15)
+#define AUDIO_SET_EXT_ID           _IO('o', 16)
+#define AUDIO_SET_ATTRIBUTES       _IOW('o', 17, audio_attributes_t)
+#define AUDIO_SET_KARAOKE          _IOW('o', 18, audio_karaoke_t)
+
+#endif /* _DVBAUDIO_H_ */
diff --git a/include/linux/dvb/ca.h b/include/linux/dvb/ca.h
new file mode 100644
index 000000000000..558af0cc7692
--- /dev/null
+++ b/include/linux/dvb/ca.h
@@ -0,0 +1,90 @@
+/*
+ * ca.h
+ *
+ * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBCA_H_
+#define _DVBCA_H_
+
+/* slot interface types and info */
+
+typedef struct ca_slot_info {
+        int num;               /* slot number */
+
+        int type;              /* CA interface this slot supports */
+#define CA_CI            1     /* CI high level interface */
+#define CA_CI_LINK       2     /* CI link layer level interface */
+#define CA_CI_PHYS       4     /* CI physical layer level interface */
+#define CA_DESCR         8     /* built-in descrambler */
+#define CA_SC          128     /* simple smart card interface */
+
+        unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+
+
+/* descrambler types and info */
+
+typedef struct ca_descr_info {
+        unsigned int num;          /* number of available descramblers (keys) */
+        unsigned int type;         /* type of supported scrambling system */
+#define CA_ECD           1
+#define CA_NDS           2
+#define CA_DSS           4
+} ca_descr_info_t;
+
+typedef struct ca_caps {
+        unsigned int slot_num;     /* total number of CA card and module slots */
+        unsigned int slot_type;    /* OR of all supported types */
+        unsigned int descr_num;    /* total number of descrambler slots (keys) */
+        unsigned int descr_type;   /* OR of all supported types */
+} ca_caps_t;
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+        unsigned int index;
+        unsigned int type;
+        unsigned int length;
+        unsigned char msg[256];
+} ca_msg_t;
+
+typedef struct ca_descr {
+        unsigned int index;
+        unsigned int parity;	/* 0 == even, 1 == odd */
+        unsigned char cw[8];
+} ca_descr_t;
+
+typedef struct ca_pid {
+        unsigned int pid;
+        int index;		/* -1 == disable*/
+} ca_pid_t;
+
+#define CA_RESET          _IO('o', 128)
+#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
+
+#endif
diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h
new file mode 100644
index 000000000000..ce3f829da82c
--- /dev/null
+++ b/include/linux/dvb/dmx.h
@@ -0,0 +1,180 @@
+/* 
+ * dmx.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBDMX_H_
+#define _DVBDMX_H_
+
+#include <asm/types.h>
+#ifdef __KERNEL__
+#include <linux/time.h>
+#else
+#include <time.h>
+#endif
+
+
+#define DMX_FILTER_SIZE 16
+
+typedef enum
+{
+	DMX_OUT_DECODER, /* Streaming directly to decoder. */
+	DMX_OUT_TAP,     /* Output going to a memory buffer */
+	                 /* (to be retrieved via the read command).*/
+	DMX_OUT_TS_TAP   /* Output multiplexed into a new TS  */
+	                 /* (to be retrieved by reading from the */
+	                 /* logical DVR device).                 */
+} dmx_output_t;
+
+
+typedef enum
+{
+	DMX_IN_FRONTEND, /* Input from a front-end device.  */
+	DMX_IN_DVR       /* Input from the logical DVR device.  */
+} dmx_input_t;
+
+
+typedef enum
+{
+        DMX_PES_AUDIO0,
+	DMX_PES_VIDEO0,
+	DMX_PES_TELETEXT0,
+	DMX_PES_SUBTITLE0,
+	DMX_PES_PCR0,
+
+        DMX_PES_AUDIO1,
+	DMX_PES_VIDEO1,
+	DMX_PES_TELETEXT1,
+	DMX_PES_SUBTITLE1,
+	DMX_PES_PCR1,
+
+        DMX_PES_AUDIO2,
+	DMX_PES_VIDEO2,
+	DMX_PES_TELETEXT2,
+	DMX_PES_SUBTITLE2,
+	DMX_PES_PCR2,
+
+        DMX_PES_AUDIO3,
+	DMX_PES_VIDEO3,
+	DMX_PES_TELETEXT3,
+	DMX_PES_SUBTITLE3,
+	DMX_PES_PCR3,
+
+	DMX_PES_OTHER
+} dmx_pes_type_t;
+
+#define DMX_PES_AUDIO    DMX_PES_AUDIO0
+#define DMX_PES_VIDEO    DMX_PES_VIDEO0
+#define DMX_PES_TELETEXT DMX_PES_TELETEXT0
+#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0
+#define DMX_PES_PCR      DMX_PES_PCR0
+
+
+typedef enum
+{
+        DMX_SCRAMBLING_EV,
+        DMX_FRONTEND_EV
+} dmx_event_t;
+
+
+typedef enum
+{
+	DMX_SCRAMBLING_OFF,
+	DMX_SCRAMBLING_ON
+} dmx_scrambling_status_t;
+
+
+typedef struct dmx_filter
+{
+	__u8  filter[DMX_FILTER_SIZE];
+	__u8  mask[DMX_FILTER_SIZE];
+	__u8  mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
+
+
+struct dmx_sct_filter_params
+{
+	__u16          pid;
+	dmx_filter_t   filter;
+	__u32          timeout;
+	__u32          flags;
+#define DMX_CHECK_CRC       1
+#define DMX_ONESHOT         2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT   0x8000
+};
+
+
+struct dmx_pes_filter_params
+{
+	__u16          pid;
+	dmx_input_t    input;
+	dmx_output_t   output;
+	dmx_pes_type_t pes_type;
+	__u32          flags;
+};
+
+
+struct dmx_event
+{
+	dmx_event_t         event;
+	time_t              timeStamp;
+	union
+	{
+		dmx_scrambling_status_t scrambling;
+	} u;
+};
+
+typedef struct dmx_caps {
+	__u32 caps;
+	int num_decoders;
+} dmx_caps_t;
+
+typedef enum {
+	DMX_SOURCE_FRONT0 = 0,
+	DMX_SOURCE_FRONT1,
+	DMX_SOURCE_FRONT2,
+	DMX_SOURCE_FRONT3,
+	DMX_SOURCE_DVR0   = 16,
+	DMX_SOURCE_DVR1,
+	DMX_SOURCE_DVR2,
+	DMX_SOURCE_DVR3
+} dmx_source_t;
+
+struct dmx_stc {
+	unsigned int num;	/* input : which STC? 0..N */
+	unsigned int base;	/* output: divisor for stc to get 90 kHz clock */
+	__u64 stc;		/* output: stc in 'base'*90 kHz units */
+};
+
+
+#define DMX_START                _IO('o', 41)
+#define DMX_STOP                 _IO('o', 42)
+#define DMX_SET_FILTER           _IOW('o', 43, struct dmx_sct_filter_params)
+#define DMX_SET_PES_FILTER       _IOW('o', 44, struct dmx_pes_filter_params)
+#define DMX_SET_BUFFER_SIZE      _IO('o', 45)
+#define DMX_GET_EVENT            _IOR('o', 46, struct dmx_event)
+#define DMX_GET_PES_PIDS         _IOR('o', 47, __u16[5])
+#define DMX_GET_CAPS             _IOR('o', 48, dmx_caps_t)
+#define DMX_SET_SOURCE           _IOW('o', 49, dmx_source_t)
+#define DMX_GET_STC              _IOWR('o', 50, struct dmx_stc)
+
+#endif /*_DVBDMX_H_*/
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
new file mode 100644
index 000000000000..d41df7047ed7
--- /dev/null
+++ b/include/linux/dvb/frontend.h
@@ -0,0 +1,267 @@
+/*
+ * frontend.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *		    Ralph  Metzler <ralph@convergence.de>
+ *		    Holger Waechtler <holger@convergence.de>
+ *		    Andre Draszik <ad@convergence.de>
+ *		    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBFRONTEND_H_
+#define _DVBFRONTEND_H_
+
+#include <asm/types.h>
+
+
+typedef enum fe_type {
+	FE_QPSK,
+	FE_QAM,
+	FE_OFDM,
+	FE_ATSC
+} fe_type_t;
+
+
+typedef enum fe_caps {
+	FE_IS_STUPID			= 0,
+	FE_CAN_INVERSION_AUTO		= 0x1,
+	FE_CAN_FEC_1_2			= 0x2,
+	FE_CAN_FEC_2_3			= 0x4,
+	FE_CAN_FEC_3_4			= 0x8,
+	FE_CAN_FEC_4_5			= 0x10,
+	FE_CAN_FEC_5_6			= 0x20,
+	FE_CAN_FEC_6_7			= 0x40,
+	FE_CAN_FEC_7_8			= 0x80,
+	FE_CAN_FEC_8_9			= 0x100,
+	FE_CAN_FEC_AUTO			= 0x200,
+	FE_CAN_QPSK			= 0x400,
+	FE_CAN_QAM_16			= 0x800,
+	FE_CAN_QAM_32			= 0x1000,
+	FE_CAN_QAM_64			= 0x2000,
+	FE_CAN_QAM_128			= 0x4000,
+	FE_CAN_QAM_256			= 0x8000,
+	FE_CAN_QAM_AUTO			= 0x10000,
+	FE_CAN_TRANSMISSION_MODE_AUTO	= 0x20000,
+	FE_CAN_BANDWIDTH_AUTO		= 0x40000,
+	FE_CAN_GUARD_INTERVAL_AUTO	= 0x80000,
+	FE_CAN_HIERARCHY_AUTO		= 0x100000,
+	FE_CAN_8VSB			= 0x200000,
+	FE_CAN_16VSB			= 0x400000,
+	FE_NEEDS_BENDING		= 0x20000000, // not supported anymore, don't use (frontend requires frequency bending)
+	FE_CAN_RECOVER			= 0x40000000, // frontend can recover from a cable unplug automatically
+	FE_CAN_MUTE_TS			= 0x80000000  // frontend can stop spurious TS data output
+} fe_caps_t;
+
+
+struct dvb_frontend_info {
+	char       name[128];
+	fe_type_t  type;
+	__u32      frequency_min;
+	__u32      frequency_max;
+	__u32      frequency_stepsize;
+	__u32      frequency_tolerance;
+	__u32      symbol_rate_min;
+	__u32      symbol_rate_max;
+	__u32      symbol_rate_tolerance;	/* ppm */
+	__u32      notifier_delay;		/* DEPRECATED */
+	fe_caps_t  caps;
+};
+
+
+/**
+ *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ *  the meaning of this struct...
+ */
+struct dvb_diseqc_master_cmd {
+	__u8 msg [6];	/*  { framing, address, command, data [3] } */
+	__u8 msg_len;	/*  valid values are 3...6  */
+};
+
+
+struct dvb_diseqc_slave_reply {
+	__u8 msg [4];	/*  { framing, data [3] } */
+	__u8 msg_len;	/*  valid values are 0...4, 0 means no msg  */
+	int  timeout;	/*  return from ioctl after timeout ms with */
+};			/*  errorcode when no message was received  */
+
+
+typedef enum fe_sec_voltage {
+	SEC_VOLTAGE_13,
+	SEC_VOLTAGE_18,
+	SEC_VOLTAGE_OFF
+} fe_sec_voltage_t;
+
+
+typedef enum fe_sec_tone_mode {
+	SEC_TONE_ON,
+	SEC_TONE_OFF
+} fe_sec_tone_mode_t;
+
+
+typedef enum fe_sec_mini_cmd {
+	SEC_MINI_A,
+	SEC_MINI_B
+} fe_sec_mini_cmd_t;
+
+
+typedef enum fe_status {
+	FE_HAS_SIGNAL	= 0x01,   /*  found something above the noise level */
+	FE_HAS_CARRIER	= 0x02,   /*  found a DVB signal  */
+	FE_HAS_VITERBI	= 0x04,   /*  FEC is stable  */
+	FE_HAS_SYNC	= 0x08,   /*  found sync bytes  */
+	FE_HAS_LOCK	= 0x10,   /*  everything's working... */
+	FE_TIMEDOUT	= 0x20,   /*  no lock within the last ~2 seconds */
+	FE_REINIT	= 0x40    /*  frontend was reinitialized,  */
+} fe_status_t;			  /*  application is recommended to reset */
+				  /*  DiSEqC, tone and parameters */
+
+typedef enum fe_spectral_inversion {
+	INVERSION_OFF,
+	INVERSION_ON,
+	INVERSION_AUTO
+} fe_spectral_inversion_t;
+
+
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO
+} fe_code_rate_t;
+
+
+typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16
+} fe_modulation_t;
+
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO
+} fe_transmit_mode_t;
+
+typedef enum fe_bandwidth {
+	BANDWIDTH_8_MHZ,
+	BANDWIDTH_7_MHZ,
+	BANDWIDTH_6_MHZ,
+	BANDWIDTH_AUTO
+} fe_bandwidth_t;
+
+
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO
+} fe_guard_interval_t;
+
+
+typedef enum fe_hierarchy {
+	HIERARCHY_NONE,
+	HIERARCHY_1,
+	HIERARCHY_2,
+	HIERARCHY_4,
+	HIERARCHY_AUTO
+} fe_hierarchy_t;
+
+
+struct dvb_qpsk_parameters {
+	__u32		symbol_rate;  /* symbol rate in Symbols per second */
+	fe_code_rate_t	fec_inner;    /* forward error correction (see above) */
+};
+
+struct dvb_qam_parameters {
+	__u32		symbol_rate; /* symbol rate in Symbols per second */
+	fe_code_rate_t	fec_inner;   /* forward error correction (see above) */
+	fe_modulation_t	modulation;  /* modulation type (see above) */
+};
+
+struct dvb_vsb_parameters {
+	fe_modulation_t	modulation;  /* modulation type (see above) */
+};
+
+struct dvb_ofdm_parameters {
+	fe_bandwidth_t      bandwidth;
+	fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
+	fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
+	fe_modulation_t     constellation; /* modulation type (see above) */
+	fe_transmit_mode_t  transmission_mode;
+	fe_guard_interval_t guard_interval;
+	fe_hierarchy_t      hierarchy_information;
+};
+
+
+struct dvb_frontend_parameters {
+	__u32 frequency;     /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
+			     /* intermediate frequency in kHz for QPSK */
+	fe_spectral_inversion_t inversion;
+	union {
+		struct dvb_qpsk_parameters qpsk;
+		struct dvb_qam_parameters  qam;
+		struct dvb_ofdm_parameters ofdm;
+		struct dvb_vsb_parameters vsb;
+	} u;
+};
+
+
+struct dvb_frontend_event {
+	fe_status_t status;
+	struct dvb_frontend_parameters parameters;
+};
+
+
+
+#define FE_GET_INFO		   _IOR('o', 61, struct dvb_frontend_info)
+
+#define FE_DISEQC_RESET_OVERLOAD   _IO('o', 62)
+#define FE_DISEQC_SEND_MASTER_CMD  _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define FE_DISEQC_SEND_BURST       _IO('o', 65)  /* fe_sec_mini_cmd_t */
+
+#define FE_SET_TONE		   _IO('o', 66)  /* fe_sec_tone_mode_t */
+#define FE_SET_VOLTAGE		   _IO('o', 67)  /* fe_sec_voltage_t */
+#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68)  /* int */
+
+#define FE_READ_STATUS		   _IOR('o', 69, fe_status_t)
+#define FE_READ_BER		   _IOR('o', 70, __u32)
+#define FE_READ_SIGNAL_STRENGTH    _IOR('o', 71, __u16)
+#define FE_READ_SNR		   _IOR('o', 72, __u16)
+#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+
+#define FE_SET_FRONTEND		   _IOW('o', 76, struct dvb_frontend_parameters)
+#define FE_GET_FRONTEND		   _IOR('o', 77, struct dvb_frontend_parameters)
+#define FE_GET_EVENT		   _IOR('o', 78, struct dvb_frontend_event)
+
+#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+
+#endif /*_DVBFRONTEND_H_*/
diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h
new file mode 100644
index 000000000000..5be474bf0d2b
--- /dev/null
+++ b/include/linux/dvb/net.h
@@ -0,0 +1,53 @@
+/*
+ * net.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBNET_H_
+#define _DVBNET_H_
+
+#include <asm/types.h>
+
+
+struct dvb_net_if {
+	__u16 pid;
+	__u16 if_num;
+	__u8  feedtype;
+#define DVB_NET_FEEDTYPE_MPE 0	/* multi protocol encapsulation */
+#define DVB_NET_FEEDTYPE_ULE 1	/* ultra lightweight encapsulation */
+};
+
+
+#define NET_ADD_IF    _IOWR('o', 52, struct dvb_net_if)
+#define NET_REMOVE_IF _IO('o', 53)
+#define NET_GET_IF    _IOWR('o', 54, struct dvb_net_if)
+
+
+/* binary compatibility cruft: */
+struct __dvb_net_if_old {
+	__u16 pid;
+	__u16 if_num;
+};
+#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old)
+#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old)
+
+
+#endif /*_DVBNET_H_*/
diff --git a/include/linux/dvb/osd.h b/include/linux/dvb/osd.h
new file mode 100644
index 000000000000..0e1973d54a6b
--- /dev/null
+++ b/include/linux/dvb/osd.h
@@ -0,0 +1,144 @@
+/*
+ * osd.h
+ *
+ * Copyright (C) 2001 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBOSD_H_
+#define _DVBOSD_H_
+
+#include <linux/compiler.h>
+
+typedef enum {
+  // All functions return -2 on "not open"
+  OSD_Close=1,    // ()
+  // Disables OSD and releases the buffers
+  // returns 0 on success
+  OSD_Open,       // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0))
+  // Opens OSD with this size and bit depth
+  // returns 0 on success, -1 on DRAM allocation error, -2 on "already open"
+  OSD_Show,       // ()
+  // enables OSD mode
+  // returns 0 on success
+  OSD_Hide,       // ()
+  // disables OSD mode
+  // returns 0 on success
+  OSD_Clear,      // ()
+  // Sets all pixel to color 0
+  // returns 0 on success
+  OSD_Fill,       // (color)
+  // Sets all pixel to color <col>
+  // returns 0 on success
+  OSD_SetColor,   // (color,R{x0},G{y0},B{x1},opacity{y1})
+  // set palette entry <num> to <r,g,b>, <mix> and <trans> apply
+  // R,G,B: 0..255
+  // R=Red, G=Green, B=Blue
+  // opacity=0:      pixel opacity 0% (only video pixel shows)
+  // opacity=1..254: pixel opacity as specified in header
+  // opacity=255:    pixel opacity 100% (only OSD pixel shows)
+  // returns 0 on success, -1 on error
+  OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data)
+  // Set a number of entries in the palette
+  // sets the entries "firstcolor" through "lastcolor" from the array "data"
+  // data has 4 byte for each color:
+  // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel
+  OSD_SetTrans,   // (transparency{color})
+  // Sets transparency of mixed pixel (0..15)
+  // returns 0 on success
+  OSD_SetPixel,   // (x0,y0,color)
+  // sets pixel <x>,<y> to color number <col>
+  // returns 0 on success, -1 on error
+  OSD_GetPixel,   // (x0,y0)
+  // returns color number of pixel <x>,<y>,  or -1
+  OSD_SetRow,     // (x0,y0,x1,data)
+  // fills pixels x0,y through  x1,y with the content of data[]
+  // returns 0 on success, -1 on clipping all pixel (no pixel drawn)
+  OSD_SetBlock,   // (x0,y0,x1,y1,increment{color},data)
+  // fills pixels x0,y0 through  x1,y1 with the content of data[]
+  // inc contains the width of one line in the data block,
+  // inc<=0 uses blockwidth as linewidth
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_FillRow,    // (x0,y0,x1,color)
+  // fills pixels x0,y through  x1,y with the color <col>
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_FillBlock,  // (x0,y0,x1,y1,color)
+  // fills pixels x0,y0 through  x1,y1 with the color <col>
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_Line,       // (x0,y0,x1,y1,color)
+  // draw a line from x0,y0 to x1,y1 with the color <col>
+  // returns 0 on success
+  OSD_Query,      // (x0,y0,x1,y1,xasp{color}}), yasp=11
+  // fills parameters with the picture dimensions and the pixel aspect ratio
+  // returns 0 on success
+  OSD_Test,       // ()
+  // draws a test picture. for debugging purposes only
+  // returns 0 on success
+// TODO: remove "test" in final version
+  OSD_Text,       // (x0,y0,size,color,text)
+  OSD_SetWindow, //  (x0) set window with number 0<x0<8 as current
+  OSD_MoveWindow, //  move current window to (x0, y0)
+  OSD_OpenRaw,	// Open other types of OSD windows
+} OSD_Command;
+
+typedef struct osd_cmd_s {
+        OSD_Command cmd;
+        int x0;
+        int y0;
+        int x1;
+        int y1;
+        int color;
+        void __user *data;
+} osd_cmd_t;
+
+/* OSD_OpenRaw: set 'color' to desired window type */
+typedef enum {
+        OSD_BITMAP1,           /* 1 bit bitmap */
+        OSD_BITMAP2,           /* 2 bit bitmap */
+        OSD_BITMAP4,           /* 4 bit bitmap */
+        OSD_BITMAP8,           /* 8 bit bitmap */
+        OSD_BITMAP1HR,         /* 1 Bit bitmap half resolution */
+        OSD_BITMAP2HR,         /* 2 bit bitmap half resolution */
+        OSD_BITMAP4HR,         /* 4 bit bitmap half resolution */
+        OSD_BITMAP8HR,         /* 8 bit bitmap half resolution */
+        OSD_YCRCB422,          /* 4:2:2 YCRCB Graphic Display */
+        OSD_YCRCB444,          /* 4:4:4 YCRCB Graphic Display */
+        OSD_YCRCB444HR,        /* 4:4:4 YCRCB graphic half resolution */
+        OSD_VIDEOTSIZE,        /* True Size Normal MPEG Video Display */
+        OSD_VIDEOHSIZE,        /* MPEG Video Display Half Resolution */
+        OSD_VIDEOQSIZE,        /* MPEG Video Display Quarter Resolution */
+        OSD_VIDEODSIZE,        /* MPEG Video Display Double Resolution */
+        OSD_VIDEOTHSIZE,       /* True Size MPEG Video Display Half Resolution */
+        OSD_VIDEOTQSIZE,       /* True Size MPEG Video Display Quarter Resolution*/
+        OSD_VIDEOTDSIZE,       /* True Size MPEG Video Display Double Resolution */
+        OSD_VIDEONSIZE,        /* Full Size MPEG Video Display */
+        OSD_CURSOR             /* Cursor */
+} osd_raw_window_t;
+
+typedef struct osd_cap_s {
+        int  cmd;
+#define OSD_CAP_MEMSIZE         1  /* memory size */
+        long val;
+} osd_cap_t;
+
+
+#define OSD_SEND_CMD            _IOW('o', 160, osd_cmd_t)
+#define OSD_GET_CAPABILITY      _IOR('o', 161, osd_cap_t)
+
+#endif
diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
new file mode 100644
index 000000000000..6183c9c4849e
--- /dev/null
+++ b/include/linux/dvb/version.h
@@ -0,0 +1,29 @@
+/*
+ * version.h
+ *
+ * Copyright (C) 2000 Holger Waechtler <holger@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBVERSION_H_
+#define _DVBVERSION_H_
+
+#define DVB_API_VERSION 3
+#define DVB_API_VERSION_MINOR 1
+
+#endif /*_DVBVERSION_H_*/
diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h
new file mode 100644
index 000000000000..941045e9ab89
--- /dev/null
+++ b/include/linux/dvb/video.h
@@ -0,0 +1,203 @@
+/*
+ * video.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBVIDEO_H_
+#define _DVBVIDEO_H_
+
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#include <time.h>
+#endif
+
+
+typedef enum {
+	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+        VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+	VIDEO_FORMAT_221_1    /* 2.21:1 */
+} video_format_t;
+
+
+typedef enum {
+	 VIDEO_SYSTEM_PAL,
+	 VIDEO_SYSTEM_NTSC,
+	 VIDEO_SYSTEM_PALN,
+	 VIDEO_SYSTEM_PALNc,
+	 VIDEO_SYSTEM_PALM,
+	 VIDEO_SYSTEM_NTSC60,
+	 VIDEO_SYSTEM_PAL60,
+	 VIDEO_SYSTEM_PALM60
+} video_system_t;
+
+
+typedef enum {
+        VIDEO_PAN_SCAN,       /* use pan and scan format */
+	VIDEO_LETTER_BOX,     /* use letterbox format */
+	VIDEO_CENTER_CUT_OUT  /* use center cut out format */
+} video_displayformat_t;
+
+typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+} video_size_t;
+
+typedef enum {
+        VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+	VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+			       comes from the user through the write
+			       system call */
+} video_stream_source_t;
+
+
+typedef enum {
+	VIDEO_STOPPED, /* Video is stopped */
+        VIDEO_PLAYING, /* Video is currently playing */
+	VIDEO_FREEZED  /* Video is freezed */
+} video_play_state_t;
+
+
+struct video_event {
+        int32_t type;
+#define VIDEO_EVENT_SIZE_CHANGED	1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+        time_t timestamp;
+	union {
+	        video_size_t size;
+		unsigned int frame_rate;	/* in frames per 1000sec */
+	} u;
+};
+
+
+struct video_status {
+        int                   video_blank;   /* blank video on freeze? */
+        video_play_state_t    play_state;    /* current state of playback */
+        video_stream_source_t stream_source; /* current source (demux/memory) */
+        video_format_t        video_format;  /* current aspect ratio of stream*/
+        video_displayformat_t display_format;/* selected cropping mode */
+};
+
+
+struct video_still_picture {
+        char __user *iFrame;        /* pointer to a single iframe in memory */
+        int32_t size;
+};
+
+
+typedef
+struct video_highlight {
+	int     active;      /*    1=show highlight, 0=hide highlight */
+	uint8_t contrast1;   /*    7- 4  Pattern pixel contrast */
+                             /*    3- 0  Background pixel contrast */
+	uint8_t contrast2;   /*    7- 4  Emphasis pixel-2 contrast */
+                             /*    3- 0  Emphasis pixel-1 contrast */
+	uint8_t color1;      /*    7- 4  Pattern pixel color */
+                             /*    3- 0  Background pixel color */
+	uint8_t color2;      /*    7- 4  Emphasis pixel-2 color */
+                             /*    3- 0  Emphasis pixel-1 color */
+	uint32_t ypos;       /*   23-22  auto action mode */
+                             /*   21-12  start y */
+                             /*    9- 0  end y */
+	uint32_t xpos;       /*   23-22  button color number */
+                             /*   21-12  start x */
+                             /*    9- 0  end x */
+} video_highlight_t;
+
+
+typedef struct video_spu {
+	int active;
+	int stream_id;
+} video_spu_t;
+
+
+typedef struct video_spu_palette {      /* SPU Palette information */
+	int length;
+	uint8_t *palette;
+} video_spu_palette_t;
+
+
+typedef struct video_navi_pack {
+	int length;          /* 0 ... 1024 */
+	uint8_t data[1024];
+} video_navi_pack_t;
+
+
+typedef uint16_t video_attributes_t;
+/*   bits: descr. */
+/*   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
+/*   13-12 TV system (0=525/60, 1=625/50) */
+/*   11-10 Aspect ratio (0=4:3, 3=16:9) */
+/*    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
+/*    7    line 21-1 data present in GOP (1=yes, 0=no) */
+/*    6    line 21-2 data present in GOP (1=yes, 0=no) */
+/*    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
+/*    2    source letterboxed (1=yes, 0=no) */
+/*    0    film/camera mode (0=camera, 1=film (625/50 only)) */
+
+
+/* bit definitions for capabilities: */
+/* can the hardware decode MPEG1 and/or MPEG2? */
+#define VIDEO_CAP_MPEG1   1
+#define VIDEO_CAP_MPEG2   2
+/* can you send a system and/or program stream to video device?
+   (you still have to open the video and the audio device but only
+    send the stream to the video device) */
+#define VIDEO_CAP_SYS     4
+#define VIDEO_CAP_PROG    8
+/* can the driver also handle SPU, NAVI and CSS encoded data?
+   (CSS API is not present yet) */
+#define VIDEO_CAP_SPU    16
+#define VIDEO_CAP_NAVI   32
+#define VIDEO_CAP_CSS    64
+
+
+#define VIDEO_STOP                 _IO('o', 21)
+#define VIDEO_PLAY                 _IO('o', 22)
+#define VIDEO_FREEZE               _IO('o', 23)
+#define VIDEO_CONTINUE             _IO('o', 24)
+#define VIDEO_SELECT_SOURCE        _IO('o', 25)
+#define VIDEO_SET_BLANK            _IO('o', 26)
+#define VIDEO_GET_STATUS           _IOR('o', 27, struct video_status)
+#define VIDEO_GET_EVENT            _IOR('o', 28, struct video_event)
+#define VIDEO_SET_DISPLAY_FORMAT   _IO('o', 29)
+#define VIDEO_STILLPICTURE         _IOW('o', 30, struct video_still_picture)
+#define VIDEO_FAST_FORWARD         _IO('o', 31)
+#define VIDEO_SLOWMOTION           _IO('o', 32)
+#define VIDEO_GET_CAPABILITIES     _IOR('o', 33, unsigned int)
+#define VIDEO_CLEAR_BUFFER         _IO('o',  34)
+#define VIDEO_SET_ID               _IO('o', 35)
+#define VIDEO_SET_STREAMTYPE       _IO('o', 36)
+#define VIDEO_SET_FORMAT           _IO('o', 37)
+#define VIDEO_SET_SYSTEM           _IO('o', 38)
+#define VIDEO_SET_HIGHLIGHT        _IOW('o', 39, video_highlight_t)
+#define VIDEO_SET_SPU              _IOW('o', 50, video_spu_t)
+#define VIDEO_SET_SPU_PALETTE      _IOW('o', 51, video_spu_palette_t)
+#define VIDEO_GET_NAVI             _IOR('o', 52, video_navi_pack_t)
+#define VIDEO_SET_ATTRIBUTES       _IO('o', 53)
+#define VIDEO_GET_SIZE             _IOR('o', 55, video_size_t)
+#define VIDEO_GET_FRAME_RATE       _IOR('o', 56, unsigned int)
+
+#endif /*_DVBVIDEO_H_*/
diff --git a/include/linux/edd.h b/include/linux/edd.h
new file mode 100644
index 000000000000..c6e6747a401d
--- /dev/null
+++ b/include/linux/edd.h
@@ -0,0 +1,194 @@
+/*
+ * linux/include/linux/edd.h
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk.  The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_EDD_H
+#define _LINUX_EDD_H
+
+#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
+				   in boot_params - treat this as 1 byte  */
+#define EDDBUF	0x600		/* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
+#define EDDEXTSIZE 8		/* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+				     in boot_params - treat this as 1 byte  */
+#define EDD_CL_EQUALS   0x3d646465     /* "edd=" */
+#define EDD_CL_OFF      0x666f         /* "of" for off  */
+#define EDD_CL_SKIP     0x6b73         /* "sk" for skipmbr */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
+#define EDD_INFO_REMOVABLE                     (1 << 2)
+#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
+#define EDD_INFO_LOCKABLE                      (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
+#define EDD_INFO_USE_INT13_FN50                (1 << 7)
+
+struct edd_device_params {
+	u16 length;
+	u16 info_flags;
+	u32 num_default_cylinders;
+	u32 num_default_heads;
+	u32 sectors_per_track;
+	u64 number_of_sectors;
+	u16 bytes_per_sector;
+	u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
+	u16 key;		/* = 0xBEDD */
+	u8 device_path_info_length;	/* = 44 */
+	u8 reserved2;
+	u16 reserved3;
+	u8 host_bus_type[4];
+	u8 interface_type[8];
+	union {
+		struct {
+			u16 base_address;
+			u16 reserved1;
+			u32 reserved2;
+		} __attribute__ ((packed)) isa;
+		struct {
+			u8 bus;
+			u8 slot;
+			u8 function;
+			u8 channel;
+			u32 reserved;
+		} __attribute__ ((packed)) pci;
+		/* pcix is same as pci */
+		struct {
+			u64 reserved;
+		} __attribute__ ((packed)) ibnd;
+		struct {
+			u64 reserved;
+		} __attribute__ ((packed)) xprs;
+		struct {
+			u64 reserved;
+		} __attribute__ ((packed)) htpt;
+		struct {
+			u64 reserved;
+		} __attribute__ ((packed)) unknown;
+	} interface_path;
+	union {
+		struct {
+			u8 device;
+			u8 reserved1;
+			u16 reserved2;
+			u32 reserved3;
+			u64 reserved4;
+		} __attribute__ ((packed)) ata;
+		struct {
+			u8 device;
+			u8 lun;
+			u8 reserved1;
+			u8 reserved2;
+			u32 reserved3;
+			u64 reserved4;
+		} __attribute__ ((packed)) atapi;
+		struct {
+			u16 id;
+			u64 lun;
+			u16 reserved1;
+			u32 reserved2;
+		} __attribute__ ((packed)) scsi;
+		struct {
+			u64 serial_number;
+			u64 reserved;
+		} __attribute__ ((packed)) usb;
+		struct {
+			u64 eui;
+			u64 reserved;
+		} __attribute__ ((packed)) i1394;
+		struct {
+			u64 wwid;
+			u64 lun;
+		} __attribute__ ((packed)) fibre;
+		struct {
+			u64 identity_tag;
+			u64 reserved;
+		} __attribute__ ((packed)) i2o;
+		struct {
+			u32 array_number;
+			u32 reserved1;
+			u64 reserved2;
+		} __attribute__ ((packed)) raid;
+		struct {
+			u8 device;
+			u8 reserved1;
+			u16 reserved2;
+			u32 reserved3;
+			u64 reserved4;
+		} __attribute__ ((packed)) sata;
+		struct {
+			u64 reserved1;
+			u64 reserved2;
+		} __attribute__ ((packed)) unknown;
+	} device_path;
+	u8 reserved4;
+	u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+	u8 device;
+	u8 version;
+	u16 interface_support;
+	u16 legacy_max_cylinder;
+	u8 legacy_max_head;
+	u8 legacy_sectors_per_track;
+	struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+	struct edd_info edd_info[EDDMAXNR];
+	unsigned char mbr_signature_nr;
+	unsigned char edd_info_nr;
+};
+
+extern struct edd edd;
+
+#endif				/*!__ASSEMBLY__ */
+
+#endif				/* _LINUX_EDD_H */
diff --git a/include/linux/eeprom.h b/include/linux/eeprom.h
new file mode 100644
index 000000000000..38afd9da1dfe
--- /dev/null
+++ b/include/linux/eeprom.h
@@ -0,0 +1,136 @@
+/* credit winbond-840.c
+ */
+#include <asm/io.h>
+struct eeprom_ops {
+	void	(*set_cs)(void *ee);
+	void	(*clear_cs)(void *ee);
+};
+
+#define EEPOL_EEDI	0x01
+#define EEPOL_EEDO	0x02
+#define EEPOL_EECLK	0x04
+#define EEPOL_EESEL	0x08
+
+struct eeprom {
+	void *dev;
+	struct eeprom_ops *ops;
+
+	void __iomem *	addr;
+
+	unsigned	ee_addr_bits;
+
+	unsigned	eesel;
+	unsigned	eeclk;
+	unsigned	eedo;
+	unsigned	eedi;
+	unsigned	polarity;
+	unsigned	ee_state;
+
+	spinlock_t	*lock;
+	u32		*cache;
+};
+
+
+u8   eeprom_readb(struct eeprom *ee, unsigned address);
+void eeprom_read(struct eeprom *ee, unsigned address, u8 *bytes,
+		unsigned count);
+void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data);
+void eeprom_write(struct eeprom *ee, unsigned address, u8 *bytes,
+		unsigned count);
+
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+        EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+void setup_ee_mem_bitbanger(struct eeprom *ee, void __iomem *memaddr, int eesel_bit, int eeclk_bit, int eedo_bit, int eedi_bit, unsigned polarity)
+{
+	ee->addr = memaddr;
+	ee->eesel = 1 << eesel_bit;
+	ee->eeclk = 1 << eeclk_bit;
+	ee->eedo = 1 << eedo_bit;
+	ee->eedi = 1 << eedi_bit;
+
+	ee->polarity = polarity;
+
+	*ee->cache = readl(ee->addr);
+}
+
+/* foo. put this in a .c file */
+static inline void eeprom_update(struct eeprom *ee, u32 mask, int pol)
+{
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(ee->lock, flags);
+	data = *ee->cache;
+
+	data &= ~mask;
+	if (pol)
+		data |= mask;
+
+	*ee->cache = data;
+//printk("update: %08x\n", data);
+	writel(data, ee->addr);
+	spin_unlock_irqrestore(ee->lock, flags);
+}
+
+void eeprom_clk_lo(struct eeprom *ee)
+{
+	int pol = !!(ee->polarity & EEPOL_EECLK);
+
+	eeprom_update(ee, ee->eeclk, pol);
+	udelay(2);
+}
+
+void eeprom_clk_hi(struct eeprom *ee)
+{
+	int pol = !!(ee->polarity & EEPOL_EECLK);
+
+	eeprom_update(ee, ee->eeclk, !pol);
+	udelay(2);
+}
+
+void eeprom_send_addr(struct eeprom *ee, unsigned address)
+{
+	int pol = !!(ee->polarity & EEPOL_EEDI);
+	unsigned i;
+	address |= 6 << 6;
+
+        /* Shift the read command bits out. */
+        for (i=0; i<11; i++) {
+		eeprom_update(ee, ee->eedi, ((address >> 10) & 1) ^ pol);
+		address <<= 1;
+		eeprom_clk_hi(ee);
+		eeprom_clk_lo(ee);
+        }
+	eeprom_update(ee, ee->eedi, pol);
+}
+
+u16   eeprom_readw(struct eeprom *ee, unsigned address)
+{
+	unsigned i;
+	u16	res = 0;
+
+	eeprom_clk_lo(ee);
+	eeprom_update(ee, ee->eesel, 1 ^ !!(ee->polarity & EEPOL_EESEL));
+	eeprom_send_addr(ee, address);
+
+	for (i=0; i<16; i++) {
+		u32 data;
+		eeprom_clk_hi(ee);
+		res <<= 1;
+		data = readl(ee->addr);
+//printk("eeprom_readw: %08x\n", data);
+		res |= !!(data & ee->eedo) ^ !!(ee->polarity & EEPOL_EEDO);
+		eeprom_clk_lo(ee);
+	}
+	eeprom_update(ee, ee->eesel, 0 ^ !!(ee->polarity & EEPOL_EESEL));
+
+	return res;
+}
+
+
+void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data)
+{
+}
diff --git a/include/linux/efi.h b/include/linux/efi.h
new file mode 100644
index 000000000000..047e7222df7a
--- /dev/null
+++ b/include/linux/efi.h
@@ -0,0 +1,398 @@
+#ifndef _LINUX_EFI_H
+#define _LINUX_EFI_H
+
+/*
+ * Extensible Firmware Interface
+ * Based on 'Extensible Firmware Interface Specification' version 0.9, April 30, 1999
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999, 2002-2003 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/rtc.h>
+#include <linux/ioport.h>
+
+#include <asm/page.h>
+#include <asm/system.h>
+
+#define EFI_SUCCESS		0
+#define EFI_LOAD_ERROR          ( 1 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_INVALID_PARAMETER	( 2 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_UNSUPPORTED		( 3 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_BAD_BUFFER_SIZE     ( 4 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_BUFFER_TOO_SMALL	( 5 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_NOT_FOUND		(14 | (1UL << (BITS_PER_LONG-1)))
+
+typedef unsigned long efi_status_t;
+typedef u8 efi_bool_t;
+typedef u16 efi_char16_t;		/* UNICODE character */
+
+
+typedef struct {
+	u8 b[16];
+} efi_guid_t;
+
+#define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
+((efi_guid_t) \
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+  (b) & 0xff, ((b) >> 8) & 0xff, \
+  (c) & 0xff, ((c) >> 8) & 0xff, \
+  (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+/*
+ * Generic EFI table header
+ */
+typedef	struct {
+	u64 signature;
+	u32 revision;
+	u32 headersize;
+	u32 crc32;
+	u32 reserved;
+} efi_table_hdr_t;
+
+/*
+ * Memory map descriptor:
+ */
+
+/* Memory types: */
+#define EFI_RESERVED_TYPE		 0
+#define EFI_LOADER_CODE			 1
+#define EFI_LOADER_DATA			 2
+#define EFI_BOOT_SERVICES_CODE		 3
+#define EFI_BOOT_SERVICES_DATA		 4
+#define EFI_RUNTIME_SERVICES_CODE	 5
+#define EFI_RUNTIME_SERVICES_DATA	 6
+#define EFI_CONVENTIONAL_MEMORY		 7
+#define EFI_UNUSABLE_MEMORY		 8
+#define EFI_ACPI_RECLAIM_MEMORY		 9
+#define EFI_ACPI_MEMORY_NVS		10
+#define EFI_MEMORY_MAPPED_IO		11
+#define EFI_MEMORY_MAPPED_IO_PORT_SPACE	12
+#define EFI_PAL_CODE			13
+#define EFI_MAX_MEMORY_TYPE		14
+
+/* Attribute values: */
+#define EFI_MEMORY_UC		((u64)0x0000000000000001ULL)	/* uncached */
+#define EFI_MEMORY_WC		((u64)0x0000000000000002ULL)	/* write-coalescing */
+#define EFI_MEMORY_WT		((u64)0x0000000000000004ULL)	/* write-through */
+#define EFI_MEMORY_WB		((u64)0x0000000000000008ULL)	/* write-back */
+#define EFI_MEMORY_WP		((u64)0x0000000000001000ULL)	/* write-protect */
+#define EFI_MEMORY_RP		((u64)0x0000000000002000ULL)	/* read-protect */
+#define EFI_MEMORY_XP		((u64)0x0000000000004000ULL)	/* execute-protect */
+#define EFI_MEMORY_RUNTIME	((u64)0x8000000000000000ULL)	/* range requires runtime mapping */
+#define EFI_MEMORY_DESCRIPTOR_VERSION	1
+
+#define EFI_PAGE_SHIFT		12
+
+/*
+ * For current x86 implementations of EFI, there is
+ * additional padding in the mem descriptors.  This is not
+ * the case in ia64.  Need to have this fixed in the f/w.
+ */
+typedef struct {
+	u32 type;
+	u32 pad;
+	u64 phys_addr;
+	u64 virt_addr;
+	u64 num_pages;
+	u64 attribute;
+#if defined (__i386__)
+	u64 pad1;
+#endif
+} efi_memory_desc_t;
+
+typedef int (*efi_freemem_callback_t) (unsigned long start, unsigned long end, void *arg);
+
+/*
+ * Types and defines for Time Services
+ */
+#define EFI_TIME_ADJUST_DAYLIGHT 0x1
+#define EFI_TIME_IN_DAYLIGHT     0x2
+#define EFI_UNSPECIFIED_TIMEZONE 0x07ff
+
+typedef struct {
+	u16 year;
+	u8 month;
+	u8 day;
+	u8 hour;
+	u8 minute;
+	u8 second;
+	u8 pad1;
+	u32 nanosecond;
+	s16 timezone;
+	u8 daylight;
+	u8 pad2;
+} efi_time_t;
+
+typedef struct {
+	u32 resolution;
+	u32 accuracy;
+	u8 sets_to_zero;
+} efi_time_cap_t;
+
+/*
+ * Types and defines for EFI ResetSystem
+ */
+#define EFI_RESET_COLD 0
+#define EFI_RESET_WARM 1
+#define EFI_RESET_SHUTDOWN 2
+
+/*
+ * EFI Runtime Services table
+ */
+#define EFI_RUNTIME_SERVICES_SIGNATURE ((u64)0x5652453544e5552ULL)
+#define EFI_RUNTIME_SERVICES_REVISION  0x00010000
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	unsigned long get_time;
+	unsigned long set_time;
+	unsigned long get_wakeup_time;
+	unsigned long set_wakeup_time;
+	unsigned long set_virtual_address_map;
+	unsigned long convert_pointer;
+	unsigned long get_variable;
+	unsigned long get_next_variable;
+	unsigned long set_variable;
+	unsigned long get_next_high_mono_count;
+	unsigned long reset_system;
+} efi_runtime_services_t;
+
+typedef efi_status_t efi_get_time_t (efi_time_t *tm, efi_time_cap_t *tc);
+typedef efi_status_t efi_set_time_t (efi_time_t *tm);
+typedef efi_status_t efi_get_wakeup_time_t (efi_bool_t *enabled, efi_bool_t *pending,
+					    efi_time_t *tm);
+typedef efi_status_t efi_set_wakeup_time_t (efi_bool_t enabled, efi_time_t *tm);
+typedef efi_status_t efi_get_variable_t (efi_char16_t *name, efi_guid_t *vendor, u32 *attr,
+					 unsigned long *data_size, void *data);
+typedef efi_status_t efi_get_next_variable_t (unsigned long *name_size, efi_char16_t *name,
+					      efi_guid_t *vendor);
+typedef efi_status_t efi_set_variable_t (efi_char16_t *name, efi_guid_t *vendor, 
+					 unsigned long attr, unsigned long data_size, 
+					 void *data);
+typedef efi_status_t efi_get_next_high_mono_count_t (u32 *count);
+typedef void efi_reset_system_t (int reset_type, efi_status_t status,
+				 unsigned long data_size, efi_char16_t *data);
+typedef efi_status_t efi_set_virtual_address_map_t (unsigned long memory_map_size,
+						unsigned long descriptor_size,
+						u32 descriptor_version,
+						efi_memory_desc_t *virtual_map);
+
+/*
+ *  EFI Configuration Table and GUID definitions
+ */
+#define NULL_GUID \
+    EFI_GUID(  0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 )
+
+#define MPS_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d2f, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define ACPI_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d30, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define ACPI_20_TABLE_GUID    \
+    EFI_GUID(  0x8868e871, 0xe4f1, 0x11d3, 0xbc, 0x22, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81 )
+
+#define SMBIOS_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define SAL_SYSTEM_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define HCDP_TABLE_GUID	\
+    EFI_GUID(  0xf951938d, 0x620b, 0x42ef, 0x82, 0x79, 0xa8, 0x4b, 0x79, 0x61, 0x78, 0x98 )
+
+#define UGA_IO_PROTOCOL_GUID \
+    EFI_GUID(  0x61a4d49e, 0x6f68, 0x4f1b, 0xb9, 0x22, 0xa8, 0x6e, 0xed, 0xb, 0x7, 0xa2 )
+
+#define EFI_GLOBAL_VARIABLE_GUID \
+    EFI_GUID(  0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c )
+
+typedef struct {
+	efi_guid_t guid;
+	unsigned long table;
+} efi_config_table_t;
+
+#define EFI_SYSTEM_TABLE_SIGNATURE ((u64)0x5453595320494249ULL)
+#define EFI_SYSTEM_TABLE_REVISION  ((1 << 16) | 00)
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	unsigned long fw_vendor;	/* physical addr of CHAR16 vendor string */
+	u32 fw_revision;
+	unsigned long con_in_handle;
+	unsigned long con_in;
+	unsigned long con_out_handle;
+	unsigned long con_out;
+	unsigned long stderr_handle;
+	unsigned long stderr;
+	efi_runtime_services_t *runtime;
+	unsigned long boottime;
+	unsigned long nr_tables;
+	unsigned long tables;
+} efi_system_table_t;
+
+struct efi_memory_map {
+	efi_memory_desc_t *phys_map;
+	efi_memory_desc_t *map;
+	int nr_map;
+	unsigned long desc_version;
+};
+
+/*
+ * All runtime access to EFI goes through this structure:
+ */
+extern struct efi {
+	efi_system_table_t *systab;	/* EFI system table */
+	void *mps;			/* MPS table */
+	void *acpi;			/* ACPI table  (IA64 ext 0.71) */
+	void *acpi20;			/* ACPI table  (ACPI 2.0) */
+	void *smbios;			/* SM BIOS table */
+	void *sal_systab;		/* SAL system table */
+	void *boot_info;		/* boot info table */
+	void *hcdp;			/* HCDP table */
+	void *uga;			/* UGA table */
+	efi_get_time_t *get_time;
+	efi_set_time_t *set_time;
+	efi_get_wakeup_time_t *get_wakeup_time;
+	efi_set_wakeup_time_t *set_wakeup_time;
+	efi_get_variable_t *get_variable;
+	efi_get_next_variable_t *get_next_variable;
+	efi_set_variable_t *set_variable;
+	efi_get_next_high_mono_count_t *get_next_high_mono_count;
+	efi_reset_system_t *reset_system;
+	efi_set_virtual_address_map_t *set_virtual_address_map;
+} efi;
+
+static inline int
+efi_guidcmp (efi_guid_t left, efi_guid_t right)
+{
+	return memcmp(&left, &right, sizeof (efi_guid_t));
+}
+
+static inline char *
+efi_guid_unparse(efi_guid_t *guid, char *out)
+{
+	sprintf(out, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x",
+		guid->b[3], guid->b[2], guid->b[1], guid->b[0],
+		guid->b[5], guid->b[4], guid->b[7], guid->b[6],
+		guid->b[8], guid->b[9], guid->b[10], guid->b[11],
+		guid->b[12], guid->b[13], guid->b[14], guid->b[15]);
+        return out;
+}
+
+extern void efi_init (void);
+extern void *efi_get_pal_addr (void);
+extern void efi_map_pal_code (void);
+extern void efi_map_memmap(void);
+extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
+extern void efi_gettimeofday (struct timespec *ts);
+extern void efi_enter_virtual_mode (void);	/* switch EFI to virtual mode, if possible */
+extern u64 efi_get_iobase (void);
+extern u32 efi_mem_type (unsigned long phys_addr);
+extern u64 efi_mem_attributes (unsigned long phys_addr);
+extern int __init efi_uart_console_only (void);
+extern void efi_initialize_iomem_resources(struct resource *code_resource,
+					struct resource *data_resource);
+extern unsigned long __init efi_get_time(void);
+extern int __init efi_set_rtc_mmss(unsigned long nowtime);
+extern struct efi_memory_map memmap;
+
+/**
+ * efi_range_is_wc - check the WC bit on an address range
+ * @start: starting kvirt address
+ * @len: length of range
+ *
+ * Consult the EFI memory map and make sure it's ok to set this range WC.
+ * Returns true or false.
+ */
+static inline int efi_range_is_wc(unsigned long start, unsigned long len)
+{
+	int i;
+
+	for (i = 0; i < len; i += (1UL << EFI_PAGE_SHIFT)) {
+		unsigned long paddr = __pa(start + i);
+		if (!(efi_mem_attributes(paddr) & EFI_MEMORY_WC))
+			return 0;
+	}
+	/* The range checked out */
+	return 1;
+}
+
+#ifdef CONFIG_EFI_PCDP
+extern int __init efi_setup_pcdp_console(char *);
+#endif
+
+/*
+ * We play games with efi_enabled so that the compiler will, if possible, remove
+ * EFI-related code altogether.
+ */
+#ifdef CONFIG_EFI
+# ifdef CONFIG_X86
+   extern int efi_enabled;
+# else
+#  define efi_enabled 1
+# endif
+#else
+# define efi_enabled 0
+#endif
+
+/*
+ * Variable Attributes
+ */
+#define EFI_VARIABLE_NON_VOLATILE       0x0000000000000001
+#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
+#define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
+
+/*
+ * EFI Device Path information
+ */
+#define EFI_DEV_HW			0x01
+#define  EFI_DEV_PCI				 1
+#define  EFI_DEV_PCCARD				 2
+#define  EFI_DEV_MEM_MAPPED			 3
+#define  EFI_DEV_VENDOR				 4
+#define  EFI_DEV_CONTROLLER			 5
+#define EFI_DEV_ACPI			0x02
+#define   EFI_DEV_BASIC_ACPI			 1
+#define   EFI_DEV_EXPANDED_ACPI			 2
+#define EFI_DEV_MSG			0x03
+#define   EFI_DEV_MSG_ATAPI			 1
+#define   EFI_DEV_MSG_SCSI			 2
+#define   EFI_DEV_MSG_FC			 3
+#define   EFI_DEV_MSG_1394			 4
+#define   EFI_DEV_MSG_USB			 5
+#define   EFI_DEV_MSG_USB_CLASS			15
+#define   EFI_DEV_MSG_I20			 6
+#define   EFI_DEV_MSG_MAC			11
+#define   EFI_DEV_MSG_IPV4			12
+#define   EFI_DEV_MSG_IPV6			13
+#define   EFI_DEV_MSG_INFINIBAND		 9
+#define   EFI_DEV_MSG_UART			14
+#define   EFI_DEV_MSG_VENDOR			10
+#define EFI_DEV_MEDIA			0x04
+#define   EFI_DEV_MEDIA_HARD_DRIVE		 1
+#define   EFI_DEV_MEDIA_CDROM			 2
+#define   EFI_DEV_MEDIA_VENDOR			 3
+#define   EFI_DEV_MEDIA_FILE			 4
+#define   EFI_DEV_MEDIA_PROTOCOL		 5
+#define EFI_DEV_BIOS_BOOT		0x05
+#define EFI_DEV_END_PATH		0x7F
+#define EFI_DEV_END_PATH2		0xFF
+#define   EFI_DEV_END_INSTANCE			0x01
+#define   EFI_DEV_END_ENTIRE			0xFF
+
+struct efi_generic_dev_path {
+	u8 type;
+	u8 sub_type;
+	u16 length;
+} __attribute ((packed));
+
+#endif /* _LINUX_EFI_H */
diff --git a/include/linux/efs_dir.h b/include/linux/efs_dir.h
new file mode 100644
index 000000000000..a09ec010569c
--- /dev/null
+++ b/include/linux/efs_dir.h
@@ -0,0 +1,42 @@
+/*
+ * efs_dir.h
+ *
+ * Copyright (c) 1999 Al Smith
+ */
+
+#ifndef __EFS_DIR_H__
+#define __EFS_DIR_H__
+
+#define EFS_DIRBSIZE_BITS	EFS_BLOCKSIZE_BITS
+#define EFS_DIRBSIZE		(1 << EFS_DIRBSIZE_BITS)
+
+struct efs_dentry {
+	__be32		inode;
+	unsigned char	namelen;
+	char		name[3];
+};
+
+#define EFS_DENTSIZE	(sizeof(struct efs_dentry) - 3 + 1)
+#define EFS_MAXNAMELEN  ((1 << (sizeof(char) * 8)) - 1)
+
+#define EFS_DIRBLK_HEADERSIZE	4
+#define EFS_DIRBLK_MAGIC	0xbeef	/* moo */
+
+struct efs_dir {
+	__be16	magic;
+	unsigned char	firstused;
+	unsigned char	slots;
+
+	unsigned char	space[EFS_DIRBSIZE - EFS_DIRBLK_HEADERSIZE];
+};
+
+#define EFS_MAXENTS \
+	((EFS_DIRBSIZE - EFS_DIRBLK_HEADERSIZE) / \
+	 (EFS_DENTSIZE + sizeof(char)))
+
+#define EFS_SLOTAT(dir, slot) EFS_REALOFF((dir)->space[slot])
+
+#define EFS_REALOFF(offset) ((offset << 1))
+
+#endif /* __EFS_DIR_H__ */
+
diff --git a/include/linux/efs_fs.h b/include/linux/efs_fs.h
new file mode 100644
index 000000000000..28f368c526fb
--- /dev/null
+++ b/include/linux/efs_fs.h
@@ -0,0 +1,51 @@
+/*
+ * efs_fs.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from work (c) 1995,1996 Christian Vogelgsang.
+ */
+
+#ifndef __EFS_FS_H__
+#define __EFS_FS_H__
+
+#define EFS_VERSION "1.0a"
+
+static const char cprt[] = "EFS: "EFS_VERSION" - (c) 1999 Al Smith <Al.Smith@aeschi.ch.eu.org>";
+
+#include <asm/uaccess.h>
+
+/* 1 block is 512 bytes */
+#define	EFS_BLOCKSIZE_BITS	9
+#define	EFS_BLOCKSIZE		(1 << EFS_BLOCKSIZE_BITS)
+
+#include <linux/fs.h>
+#include <linux/efs_fs_i.h>
+#include <linux/efs_fs_sb.h>
+#include <linux/efs_dir.h>
+
+static inline struct efs_inode_info *INODE_INFO(struct inode *inode)
+{
+	return container_of(inode, struct efs_inode_info, vfs_inode);
+}
+
+static inline struct efs_sb_info *SUPER_INFO(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+struct statfs;
+
+extern struct inode_operations efs_dir_inode_operations;
+extern struct file_operations efs_dir_operations;
+extern struct address_space_operations efs_symlink_aops;
+
+extern void efs_read_inode(struct inode *);
+extern efs_block_t efs_map_block(struct inode *, efs_block_t);
+extern int efs_get_block(struct inode *, sector_t, struct buffer_head *, int);
+
+extern struct dentry *efs_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern struct dentry *efs_get_parent(struct dentry *);
+extern int efs_bmap(struct inode *, int);
+
+#endif /* __EFS_FS_H__ */
diff --git a/include/linux/efs_fs_i.h b/include/linux/efs_fs_i.h
new file mode 100644
index 000000000000..617c474ca659
--- /dev/null
+++ b/include/linux/efs_fs_i.h
@@ -0,0 +1,68 @@
+/*
+ * efs_fs_i.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1988 Silicon Graphics
+ */
+
+#ifndef	__EFS_FS_I_H__
+#define	__EFS_FS_I_H__
+
+typedef	int32_t		efs_block_t;
+typedef uint32_t	efs_ino_t;
+
+#define	EFS_DIRECTEXTENTS	12
+
+/*
+ * layout of an extent, in memory and on disk. 8 bytes exactly.
+ */
+typedef union extent_u {
+	unsigned char raw[8];
+	struct extent_s {
+		unsigned int	ex_magic:8;	/* magic # (zero) */
+		unsigned int	ex_bn:24;	/* basic block */
+		unsigned int	ex_length:8;	/* numblocks in this extent */
+		unsigned int	ex_offset:24;	/* logical offset into file */
+	} cooked;
+} efs_extent;
+
+typedef struct edevs {
+	__be16		odev;
+	__be32		ndev;
+} efs_devs;
+
+/*
+ * extent based filesystem inode as it appears on disk.  The efs inode
+ * is exactly 128 bytes long.
+ */
+struct	efs_dinode {
+	__be16		di_mode;	/* mode and type of file */
+	__be16		di_nlink;	/* number of links to file */
+	__be16		di_uid;		/* owner's user id */
+	__be16		di_gid;		/* owner's group id */
+	__be32		di_size;	/* number of bytes in file */
+	__be32		di_atime;	/* time last accessed */
+	__be32		di_mtime;	/* time last modified */
+	__be32		di_ctime;	/* time created */
+	__be32		di_gen;		/* generation number */
+	__be16		di_numextents;	/* # of extents */
+	u_char		di_version;	/* version of inode */
+	u_char		di_spare;	/* spare - used by AFS */
+	union di_addr {
+		efs_extent	di_extents[EFS_DIRECTEXTENTS];
+		efs_devs	di_dev;	/* device for IFCHR/IFBLK */
+	} di_u;
+};
+
+/* efs inode storage in memory */
+struct efs_inode_info {
+	int		numextents;
+	int		lastextent;
+
+	efs_extent	extents[EFS_DIRECTEXTENTS];
+	struct inode	vfs_inode;
+};
+
+#endif	/* __EFS_FS_I_H__ */
+
diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h
new file mode 100644
index 000000000000..c76088baef28
--- /dev/null
+++ b/include/linux/efs_fs_sb.h
@@ -0,0 +1,62 @@
+/*
+ * efs_fs_sb.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1988 Silicon Graphics
+ */
+
+#ifndef __EFS_FS_SB_H__
+#define __EFS_FS_SB_H__
+
+/* statfs() magic number for EFS */
+#define EFS_SUPER_MAGIC	0x414A53
+
+/* EFS superblock magic numbers */
+#define EFS_MAGIC	0x072959
+#define EFS_NEWMAGIC	0x07295a
+
+#define IS_EFS_MAGIC(x)	((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
+
+#define EFS_SUPER		1
+#define EFS_ROOTINODE		2
+
+/* efs superblock on disk */
+struct efs_super {
+	__be32		fs_size;        /* size of filesystem, in sectors */
+	__be32		fs_firstcg;     /* bb offset to first cg */
+	__be32		fs_cgfsize;     /* size of cylinder group in bb's */
+	__be16		fs_cgisize;     /* bb's of inodes per cylinder group */
+	__be16		fs_sectors;     /* sectors per track */
+	__be16		fs_heads;       /* heads per cylinder */
+	__be16		fs_ncg;         /* # of cylinder groups in filesystem */
+	__be16		fs_dirty;       /* fs needs to be fsck'd */
+	__be32		fs_time;        /* last super-block update */
+	__be32		fs_magic;       /* magic number */
+	char		fs_fname[6];    /* file system name */
+	char		fs_fpack[6];    /* file system pack name */
+	__be32		fs_bmsize;      /* size of bitmap in bytes */
+	__be32		fs_tfree;       /* total free data blocks */
+	__be32		fs_tinode;      /* total free inodes */
+	__be32		fs_bmblock;     /* bitmap location. */
+	__be32		fs_replsb;      /* Location of replicated superblock. */
+	__be32		fs_lastialloc;  /* last allocated inode */
+	char		fs_spare[20];   /* space for expansion - MUST BE ZERO */
+	__be32		fs_checksum;    /* checksum of volume portion of fs */
+};
+
+/* efs superblock information in memory */
+struct efs_sb_info {
+	__u32	fs_magic;	/* superblock magic number */
+	__u32	fs_start;	/* first block of filesystem */
+	__u32	first_block;	/* first data block in filesystem */
+	__u32	total_blocks;	/* total number of blocks in filesystem */
+	__u32	group_size;	/* # of blocks a group consists of */ 
+	__u32	data_free;	/* # of free data blocks */
+	__u32	inode_free;	/* # of free inodes */
+	__u16	inode_blocks;	/* # of blocks used for inodes in every grp */
+	__u16	total_groups;	/* # of groups */
+};
+
+#endif /* __EFS_FS_SB_H__ */
+
diff --git a/include/linux/efs_vh.h b/include/linux/efs_vh.h
new file mode 100644
index 000000000000..8a11150c61fe
--- /dev/null
+++ b/include/linux/efs_vh.h
@@ -0,0 +1,53 @@
+/*
+ * efs_vh.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1985 MIPS Computer Systems, Inc.
+ */
+
+#ifndef __EFS_VH_H__
+#define __EFS_VH_H__
+
+#define VHMAGIC		0xbe5a941	/* volume header magic number */
+#define NPARTAB		16		/* 16 unix partitions */
+#define NVDIR		15		/* max of 15 directory entries */
+#define BFNAMESIZE	16		/* max 16 chars in boot file name */
+#define VDNAMESIZE	8
+
+struct volume_directory {
+	char	vd_name[VDNAMESIZE];	/* name */
+	__be32	vd_lbn;			/* logical block number */
+	__be32	vd_nbytes;		/* file length in bytes */
+};
+
+struct partition_table {	/* one per logical partition */
+	__be32	pt_nblks;	/* # of logical blks in partition */
+	__be32	pt_firstlbn;	/* first lbn of partition */
+	__be32	pt_type;	/* use of partition */
+};
+
+struct volume_header {
+	__be32	vh_magic;			/* identifies volume header */
+	__be16	vh_rootpt;			/* root partition number */
+	__be16	vh_swappt;			/* swap partition number */
+	char	vh_bootfile[BFNAMESIZE];	/* name of file to boot */
+	char	pad[48];			/* device param space */
+	struct volume_directory vh_vd[NVDIR];	/* other vol hdr contents */
+	struct partition_table  vh_pt[NPARTAB];	/* device partition layout */
+	__be32	vh_csum;			/* volume header checksum */
+	__be32	vh_fill;			/* fill out to 512 bytes */
+};
+
+/* partition type sysv is used for EFS format CD-ROM partitions */
+#define SGI_SYSV	0x05
+#define SGI_EFS		0x07
+#define IS_EFS(x)	(((x) == SGI_EFS) || ((x) == SGI_SYSV))
+
+struct pt_types {
+	int	pt_type;
+	char	*pt_name;
+};
+
+#endif /* __EFS_VH_H__ */
+
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
new file mode 100644
index 000000000000..4079242dced8
--- /dev/null
+++ b/include/linux/eisa.h
@@ -0,0 +1,107 @@
+#ifndef _LINUX_EISA_H
+#define _LINUX_EISA_H
+
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#define EISA_SIG_LEN   8
+#define EISA_MAX_SLOTS 8
+
+#define EISA_MAX_RESOURCES 4
+
+/* A few EISA constants/offsets... */
+
+#define EISA_DMA1_STATUS            8
+#define EISA_INT1_CTRL           0x20
+#define EISA_INT1_MASK           0x21
+#define EISA_INT2_CTRL           0xA0
+#define EISA_INT2_MASK           0xA1
+#define EISA_DMA2_STATUS         0xD0
+#define EISA_DMA2_WRITE_SINGLE   0xD4
+#define EISA_EXT_NMI_RESET_CTRL 0x461
+#define EISA_INT1_EDGE_LEVEL    0x4D0
+#define EISA_INT2_EDGE_LEVEL    0x4D1
+#define EISA_VENDOR_ID_OFFSET   0xC80
+#define EISA_CONFIG_OFFSET      0xC84
+
+#define EISA_CONFIG_ENABLED         1
+#define EISA_CONFIG_FORCED          2
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+	char          sig[EISA_SIG_LEN];
+	unsigned long driver_data;
+};
+
+/* There is not much we can say about an EISA device, apart from
+ * signature, slot number, and base address. dma_mask is set by
+ * default to parent device mask..*/
+
+struct eisa_device {
+	struct eisa_device_id id;
+	int                   slot;
+	int                   state;
+	unsigned long         base_addr;
+	struct resource       res[EISA_MAX_RESOURCES];
+	u64                   dma_mask;
+	struct device         dev; /* generic device */
+#ifdef CONFIG_EISA_NAMES
+	char		      pretty_name[DEVICE_NAME_SIZE];
+#endif
+};
+
+#define to_eisa_device(n) container_of(n, struct eisa_device, dev)
+
+static inline int eisa_get_region_index (void *addr)
+{
+	unsigned long x = (unsigned long) addr;
+
+	x &= 0xc00;
+	return (x >> 12);
+}
+
+struct eisa_driver {
+	const struct eisa_device_id *id_table;
+	struct device_driver         driver;
+};
+
+#define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver)
+
+extern struct bus_type eisa_bus_type;
+int eisa_driver_register (struct eisa_driver *edrv);
+void eisa_driver_unregister (struct eisa_driver *edrv);
+
+/* Mimics pci.h... */
+static inline void *eisa_get_drvdata (struct eisa_device *edev)
+{
+        return edev->dev.driver_data;
+}
+
+static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
+{
+        edev->dev.driver_data = data;
+}
+
+/* The EISA root device. There's rumours about machines with multiple
+ * busses (PA-RISC ?), so we try to handle that. */
+
+struct eisa_root_device {
+	struct device   *dev;	 /* Pointer to bridge device */
+	struct resource *res;
+	unsigned long    bus_base_addr;
+	int		 slots;  /* Max slot number */
+	int		 force_probe; /* Probe even when no slot 0 */
+	u64		 dma_mask; /* from bridge device */
+	int              bus_nr; /* Set by eisa_root_register */
+	struct resource  eisa_root_res;	/* ditto */
+};
+
+int eisa_root_register (struct eisa_root_device *root);
+
+#ifdef CONFIG_EISA
+extern int EISA_bus;
+#else
+# define EISA_bus 0
+#endif
+
+#endif
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
new file mode 100644
index 000000000000..ee54f81faad5
--- /dev/null
+++ b/include/linux/elevator.h
@@ -0,0 +1,145 @@
+#ifndef _LINUX_ELEVATOR_H
+#define _LINUX_ELEVATOR_H
+
+typedef int (elevator_merge_fn) (request_queue_t *, struct request **,
+				 struct bio *);
+
+typedef void (elevator_merge_req_fn) (request_queue_t *, struct request *, struct request *);
+
+typedef void (elevator_merged_fn) (request_queue_t *, struct request *);
+
+typedef struct request *(elevator_next_req_fn) (request_queue_t *);
+
+typedef void (elevator_add_req_fn) (request_queue_t *, struct request *, int);
+typedef int (elevator_queue_empty_fn) (request_queue_t *);
+typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *);
+typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *);
+typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *);
+typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *);
+typedef int (elevator_may_queue_fn) (request_queue_t *, int);
+
+typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, int);
+typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
+typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
+
+typedef int (elevator_init_fn) (request_queue_t *, elevator_t *);
+typedef void (elevator_exit_fn) (elevator_t *);
+
+struct elevator_ops
+{
+	elevator_merge_fn *elevator_merge_fn;
+	elevator_merged_fn *elevator_merged_fn;
+	elevator_merge_req_fn *elevator_merge_req_fn;
+
+	elevator_next_req_fn *elevator_next_req_fn;
+	elevator_add_req_fn *elevator_add_req_fn;
+	elevator_remove_req_fn *elevator_remove_req_fn;
+	elevator_requeue_req_fn *elevator_requeue_req_fn;
+	elevator_deactivate_req_fn *elevator_deactivate_req_fn;
+
+	elevator_queue_empty_fn *elevator_queue_empty_fn;
+	elevator_completed_req_fn *elevator_completed_req_fn;
+
+	elevator_request_list_fn *elevator_former_req_fn;
+	elevator_request_list_fn *elevator_latter_req_fn;
+
+	elevator_set_req_fn *elevator_set_req_fn;
+	elevator_put_req_fn *elevator_put_req_fn;
+
+	elevator_may_queue_fn *elevator_may_queue_fn;
+
+	elevator_init_fn *elevator_init_fn;
+	elevator_exit_fn *elevator_exit_fn;
+};
+
+#define ELV_NAME_MAX	(16)
+
+/*
+ * identifies an elevator type, such as AS or deadline
+ */
+struct elevator_type
+{
+	struct list_head list;
+	struct elevator_ops ops;
+	struct elevator_type *elevator_type;
+	struct kobj_type *elevator_ktype;
+	char elevator_name[ELV_NAME_MAX];
+	struct module *elevator_owner;
+};
+
+/*
+ * each queue has an elevator_queue assoicated with it
+ */
+struct elevator_queue
+{
+	struct elevator_ops *ops;
+	void *elevator_data;
+	struct kobject kobj;
+	struct elevator_type *elevator_type;
+};
+
+/*
+ * block elevator interface
+ */
+extern void elv_add_request(request_queue_t *, struct request *, int, int);
+extern void __elv_add_request(request_queue_t *, struct request *, int, int);
+extern int elv_merge(request_queue_t *, struct request **, struct bio *);
+extern void elv_merge_requests(request_queue_t *, struct request *,
+			       struct request *);
+extern void elv_merged_request(request_queue_t *, struct request *);
+extern void elv_remove_request(request_queue_t *, struct request *);
+extern void elv_requeue_request(request_queue_t *, struct request *);
+extern void elv_deactivate_request(request_queue_t *, struct request *);
+extern int elv_queue_empty(request_queue_t *);
+extern struct request *elv_next_request(struct request_queue *q);
+extern struct request *elv_former_request(request_queue_t *, struct request *);
+extern struct request *elv_latter_request(request_queue_t *, struct request *);
+extern int elv_register_queue(request_queue_t *q);
+extern void elv_unregister_queue(request_queue_t *q);
+extern int elv_may_queue(request_queue_t *, int);
+extern void elv_completed_request(request_queue_t *, struct request *);
+extern int elv_set_request(request_queue_t *, struct request *, int);
+extern void elv_put_request(request_queue_t *, struct request *);
+
+/*
+ * io scheduler registration
+ */
+extern int elv_register(struct elevator_type *);
+extern void elv_unregister(struct elevator_type *);
+
+/*
+ * io scheduler sysfs switching
+ */
+extern ssize_t elv_iosched_show(request_queue_t *, char *);
+extern ssize_t elv_iosched_store(request_queue_t *, const char *, size_t);
+
+extern int elevator_init(request_queue_t *, char *);
+extern void elevator_exit(elevator_t *);
+extern int elv_rq_merge_ok(struct request *, struct bio *);
+extern int elv_try_merge(struct request *, struct bio *);
+extern int elv_try_last_merge(request_queue_t *, struct bio *);
+
+/*
+ * Return values from elevator merger
+ */
+#define ELEVATOR_NO_MERGE	0
+#define ELEVATOR_FRONT_MERGE	1
+#define ELEVATOR_BACK_MERGE	2
+
+/*
+ * Insertion selection
+ */
+#define ELEVATOR_INSERT_FRONT	1
+#define ELEVATOR_INSERT_BACK	2
+#define ELEVATOR_INSERT_SORT	3
+
+/*
+ * return values from elevator_may_queue_fn
+ */
+enum {
+	ELV_MQUEUE_MAY,
+	ELV_MQUEUE_NO,
+	ELV_MQUEUE_MUST,
+};
+
+#endif
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
new file mode 100644
index 000000000000..9f5b7456bff3
--- /dev/null
+++ b/include/linux/elf-fdpic.h
@@ -0,0 +1,68 @@
+/* elf-fdpic.h: FDPIC ELF load map
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_ELF_FDPIC_H
+#define _LINUX_ELF_FDPIC_H
+
+#include <linux/elf.h>
+
+#define PT_GNU_STACK    (PT_LOOS + 0x474e551)
+
+/* segment mappings for ELF FDPIC libraries/executables/interpreters */
+struct elf32_fdpic_loadseg {
+	Elf32_Addr	addr;		/* core address to which mapped */
+	Elf32_Addr	p_vaddr;	/* VMA recorded in file */
+	Elf32_Word	p_memsz;	/* allocation size recorded in file */
+};
+
+struct elf32_fdpic_loadmap {
+	Elf32_Half	version;	/* version of these structures, just in case... */
+	Elf32_Half	nsegs;		/* number of segments */
+	struct elf32_fdpic_loadseg segs[];
+};
+
+#define ELF32_FDPIC_LOADMAP_VERSION	0x0000
+
+/*
+ * binfmt binary parameters structure
+ */
+struct elf_fdpic_params {
+	struct elfhdr			hdr;		/* ref copy of ELF header */
+	struct elf_phdr			*phdrs;		/* ref copy of PT_PHDR table */
+	struct elf32_fdpic_loadmap	*loadmap;	/* loadmap to be passed to userspace */
+	unsigned long			elfhdr_addr;	/* mapped ELF header user address */
+	unsigned long			ph_addr;	/* mapped PT_PHDR user address */
+	unsigned long			map_addr;	/* mapped loadmap user address */
+	unsigned long			entry_addr;	/* mapped entry user address */
+	unsigned long			stack_size;	/* stack size requested (PT_GNU_STACK) */
+	unsigned long			dynamic_addr;	/* mapped PT_DYNAMIC user address */
+	unsigned long			load_addr;	/* user address at which to map binary */
+	unsigned long			flags;
+#define ELF_FDPIC_FLAG_ARRANGEMENT	0x0000000f	/* PT_LOAD arrangement flags */
+#define ELF_FDPIC_FLAG_INDEPENDENT	0x00000000	/* PT_LOADs can be put anywhere */
+#define ELF_FDPIC_FLAG_HONOURVADDR	0x00000001	/* PT_LOAD.vaddr must be honoured */
+#define ELF_FDPIC_FLAG_CONSTDISP	0x00000002	/* PT_LOADs require constant
+							 * displacement */
+#define ELF_FDPIC_FLAG_CONTIGUOUS	0x00000003	/* PT_LOADs should be contiguous */
+#define ELF_FDPIC_FLAG_EXEC_STACK	0x00000010	/* T if stack to be executable */
+#define ELF_FDPIC_FLAG_NOEXEC_STACK	0x00000020	/* T if stack not to be executable */
+#define ELF_FDPIC_FLAG_EXECUTABLE	0x00000040	/* T if this object is the executable */
+#define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
+};
+
+#ifdef CONFIG_MMU
+extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+				      struct elf_fdpic_params *interp_params,
+				      unsigned long *start_stack,
+				      unsigned long *start_brk);
+#endif
+
+#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
new file mode 100644
index 000000000000..f5b3ba5a317d
--- /dev/null
+++ b/include/linux/elf.h
@@ -0,0 +1,449 @@
+#ifndef _LINUX_ELF_H
+#define _LINUX_ELF_H
+
+#include <linux/types.h>
+#include <asm/elf.h>
+
+#ifndef elf_read_implies_exec
+  /* Executables for which elf_read_implies_exec() returns TRUE will
+     have the READ_IMPLIES_EXEC personality flag set automatically.
+     Override in asm/elf.h as needed.  */
+# define elf_read_implies_exec(ex, have_pt_gnu_stack)	0
+#endif
+
+/* 32-bit ELF base types. */
+typedef __u32	Elf32_Addr;
+typedef __u16	Elf32_Half;
+typedef __u32	Elf32_Off;
+typedef __s32	Elf32_Sword;
+typedef __u32	Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64	Elf64_Addr;
+typedef __u16	Elf64_Half;
+typedef __s16	Elf64_SHalf;
+typedef __u64	Elf64_Off;
+typedef __s32	Elf64_Sword;
+typedef __u32	Elf64_Word;
+typedef __u64	Elf64_Xword;
+typedef __s64	Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* These constants define the various ELF target machines */
+#define EM_NONE  0
+#define EM_M32   1
+#define EM_SPARC 2
+#define EM_386   3
+#define EM_68K   4
+#define EM_88K   5
+#define EM_486   6   /* Perhaps disused */
+#define EM_860   7
+
+#define EM_MIPS		8	/* MIPS R3000 (officially, big-endian only) */
+
+#define EM_MIPS_RS4_BE 10	/* MIPS R4000 big-endian */
+
+#define EM_PARISC      15	/* HPPA */
+
+#define EM_SPARC32PLUS 18	/* Sun's "v8plus" */
+
+#define EM_PPC	       20	/* PowerPC */
+#define EM_PPC64       21       /* PowerPC64 */
+
+#define EM_SH	       42	/* SuperH */
+
+#define EM_SPARCV9     43	/* SPARC v9 64-bit */
+
+#define EM_IA_64	50	/* HP/Intel IA-64 */
+
+#define EM_X86_64	62	/* AMD x86-64 */
+
+#define EM_S390		22	/* IBM S/390 */
+
+#define EM_CRIS         76      /* Axis Communications 32-bit embedded processor */
+
+#define EM_V850		87	/* NEC v850 */
+
+#define EM_M32R		88	/* Renesas M32R */
+
+#define EM_H8_300       46      /* Renesas H8/300,300H,H8S */
+
+/*
+ * This is an interim value that we will use until the committee comes
+ * up with a final number.
+ */
+#define EM_ALPHA	0x9026
+
+/* Bogus old v850 magic number, used by old tools.  */
+#define EM_CYGNUS_V850	0x9080
+
+/* Bogus old m32r magic number, used by old tools.  */
+#define EM_CYGNUS_M32R	0x9041
+
+/*
+ * This is the old interim value for S/390 architecture
+ */
+#define EM_S390_OLD     0xA390
+
+#define EM_FRV		0x5441		/* Fujitsu FR-V */
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL		0
+#define DT_NEEDED	1
+#define DT_PLTRELSZ	2
+#define DT_PLTGOT	3
+#define DT_HASH		4
+#define DT_STRTAB	5
+#define DT_SYMTAB	6
+#define DT_RELA		7
+#define DT_RELASZ	8
+#define DT_RELAENT	9
+#define DT_STRSZ	10
+#define DT_SYMENT	11
+#define DT_INIT		12
+#define DT_FINI		13
+#define DT_SONAME	14
+#define DT_RPATH 	15
+#define DT_SYMBOLIC	16
+#define DT_REL	        17
+#define DT_RELSZ	18
+#define DT_RELENT	19
+#define DT_PLTREL	20
+#define DT_DEBUG	21
+#define DT_TEXTREL	22
+#define DT_JMPREL	23
+#define DT_LOPROC	0x70000000
+#define DT_HIPROC	0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL  0
+#define STB_GLOBAL 1
+#define STB_WEAK   2
+
+#define STT_NOTYPE  0
+#define STT_OBJECT  1
+#define STT_FUNC    2
+#define STT_SECTION 3
+#define STT_FILE    4
+
+#define ELF_ST_BIND(x)		((x) >> 4)
+#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
+
+/* Symbolic values for the entries in the auxiliary table
+   put on the initial stack */
+#define AT_NULL   0	/* end of vector */
+#define AT_IGNORE 1	/* entry should be ignored */
+#define AT_EXECFD 2	/* file descriptor of program */
+#define AT_PHDR   3	/* program headers for program */
+#define AT_PHENT  4	/* size of program header entry */
+#define AT_PHNUM  5	/* number of program headers */
+#define AT_PAGESZ 6	/* system page size */
+#define AT_BASE   7	/* base address of interpreter */
+#define AT_FLAGS  8	/* flags */
+#define AT_ENTRY  9	/* entry point of program */
+#define AT_NOTELF 10	/* program is not ELF */
+#define AT_UID    11	/* real uid */
+#define AT_EUID   12	/* effective uid */
+#define AT_GID    13	/* real gid */
+#define AT_EGID   14	/* effective gid */
+#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
+#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17	/* frequency at which times() increments */
+
+#define AT_SECURE 23   /* secure mode boolean */
+
+typedef struct dynamic{
+  Elf32_Sword d_tag;
+  union{
+    Elf32_Sword	d_val;
+    Elf32_Addr	d_ptr;
+  } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+  Elf64_Sxword d_tag;		/* entry tag value */
+  union {
+    Elf64_Xword d_val;
+    Elf64_Addr d_ptr;
+  } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i)			((i) >> 32)
+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+  Elf32_Sword	r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+  Elf32_Word	st_name;
+  Elf32_Addr	st_value;
+  Elf32_Word	st_size;
+  unsigned char	st_info;
+  unsigned char	st_other;
+  Elf32_Half	st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+  Elf64_Word st_name;		/* Symbol name, index in string tbl */
+  unsigned char	st_info;	/* Type and binding attributes */
+  unsigned char	st_other;	/* No defined meaning, 0 */
+  Elf64_Half st_shndx;		/* Associated section index */
+  Elf64_Addr st_value;		/* Value of the symbol */
+  Elf64_Xword st_size;		/* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr{
+  unsigned char	e_ident[EI_NIDENT];
+  Elf32_Half	e_type;
+  Elf32_Half	e_machine;
+  Elf32_Word	e_version;
+  Elf32_Addr	e_entry;  /* Entry point */
+  Elf32_Off	e_phoff;
+  Elf32_Off	e_shoff;
+  Elf32_Word	e_flags;
+  Elf32_Half	e_ehsize;
+  Elf32_Half	e_phentsize;
+  Elf32_Half	e_phnum;
+  Elf32_Half	e_shentsize;
+  Elf32_Half	e_shnum;
+  Elf32_Half	e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+  unsigned char	e_ident[16];		/* ELF "magic number" */
+  Elf64_Half e_type;
+  Elf64_Half e_machine;
+  Elf64_Word e_version;
+  Elf64_Addr e_entry;		/* Entry point virtual address */
+  Elf64_Off e_phoff;		/* Program header table file offset */
+  Elf64_Off e_shoff;		/* Section header table file offset */
+  Elf64_Word e_flags;
+  Elf64_Half e_ehsize;
+  Elf64_Half e_phentsize;
+  Elf64_Half e_phnum;
+  Elf64_Half e_shentsize;
+  Elf64_Half e_shnum;
+  Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr{
+  Elf32_Word	p_type;
+  Elf32_Off	p_offset;
+  Elf32_Addr	p_vaddr;
+  Elf32_Addr	p_paddr;
+  Elf32_Word	p_filesz;
+  Elf32_Word	p_memsz;
+  Elf32_Word	p_flags;
+  Elf32_Word	p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+  Elf64_Word p_type;
+  Elf64_Word p_flags;
+  Elf64_Off p_offset;		/* Segment file offset */
+  Elf64_Addr p_vaddr;		/* Segment virtual address */
+  Elf64_Addr p_paddr;		/* Segment physical address */
+  Elf64_Xword p_filesz;		/* Segment size in file */
+  Elf64_Xword p_memsz;		/* Segment size in memory */
+  Elf64_Xword p_align;		/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL	0
+#define SHT_PROGBITS	1
+#define SHT_SYMTAB	2
+#define SHT_STRTAB	3
+#define SHT_RELA	4
+#define SHT_HASH	5
+#define SHT_DYNAMIC	6
+#define SHT_NOTE	7
+#define SHT_NOBITS	8
+#define SHT_REL		9
+#define SHT_SHLIB	10
+#define SHT_DYNSYM	11
+#define SHT_NUM		12
+#define SHT_LOPROC	0x70000000
+#define SHT_HIPROC	0x7fffffff
+#define SHT_LOUSER	0x80000000
+#define SHT_HIUSER	0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE	0x1
+#define SHF_ALLOC	0x2
+#define SHF_EXECINSTR	0x4
+#define SHF_MASKPROC	0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF	0
+#define SHN_LORESERVE	0xff00
+#define SHN_LOPROC	0xff00
+#define SHN_HIPROC	0xff1f
+#define SHN_ABS		0xfff1
+#define SHN_COMMON	0xfff2
+#define SHN_HIRESERVE	0xffff
+ 
+typedef struct {
+  Elf32_Word	sh_name;
+  Elf32_Word	sh_type;
+  Elf32_Word	sh_flags;
+  Elf32_Addr	sh_addr;
+  Elf32_Off	sh_offset;
+  Elf32_Word	sh_size;
+  Elf32_Word	sh_link;
+  Elf32_Word	sh_info;
+  Elf32_Word	sh_addralign;
+  Elf32_Word	sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+  Elf64_Word sh_name;		/* Section name, index in string tbl */
+  Elf64_Word sh_type;		/* Type of section */
+  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
+  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
+  Elf64_Off sh_offset;		/* Section file offset */
+  Elf64_Xword sh_size;		/* Size of section in bytes */
+  Elf64_Word sh_link;		/* Index of another section */
+  Elf64_Word sh_info;		/* Additional section information */
+  Elf64_Xword sh_addralign;	/* Section alignment */
+  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define	EI_MAG0		0		/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f		/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0		/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0		/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0		/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/* Notes used in ET_CORE */
+#define NT_PRSTATUS	1
+#define NT_PRFPREG	2
+#define NT_PRPSINFO	3
+#define NT_TASKSTRUCT	4
+#define NT_AUXV		6
+#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+  Elf32_Word	n_namesz;	/* Name size */
+  Elf32_Word	n_descsz;	/* Content size */
+  Elf32_Word	n_type;		/* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+  Elf64_Word n_namesz;	/* Name size */
+  Elf64_Word n_descsz;	/* Content size */
+  Elf64_Word n_type;	/* Content type */
+} Elf64_Nhdr;
+
+#if ELF_CLASS == ELFCLASS32
+
+extern Elf32_Dyn _DYNAMIC [];
+#define elfhdr		elf32_hdr
+#define elf_phdr	elf32_phdr
+#define elf_note	elf32_note
+
+#else
+
+extern Elf64_Dyn _DYNAMIC [];
+#define elfhdr		elf64_hdr
+#define elf_phdr	elf64_phdr
+#define elf_note	elf64_note
+
+#endif
+
+
+#endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
new file mode 100644
index 000000000000..dbd7bb4a33b7
--- /dev/null
+++ b/include/linux/elfcore.h
@@ -0,0 +1,129 @@
+#ifndef _LINUX_ELFCORE_H
+#define _LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#include <linux/user.h>
+
+struct elf_siginfo
+{
+	int	si_signo;			/* signal number */
+	int	si_code;			/* extra code */
+	int	si_errno;			/* errno */
+};
+
+#include <asm/elf.h>
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided.  This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+	long	pr_flags;	/* XXX Process flags */
+	short	pr_why;		/* XXX Reason for process halt */
+	short	pr_what;	/* XXX More detailed reason */
+#endif
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned long pr_sigpend;	/* Set of pending signals */
+	unsigned long pr_sighold;	/* Set of held signals */
+#if 0
+	struct sigaltstack pr_altstack;	/* Alternate stack info */
+	struct sigaction pr_action;	/* Signal action for current sig */
+#endif
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct timeval pr_utime;	/* User time */
+	struct timeval pr_stime;	/* System time */
+	struct timeval pr_cutime;	/* Cumulative user time */
+	struct timeval pr_cstime;	/* Cumulative system time */
+#if 0
+	long	pr_instr;		/* Current instruction */
+#endif
+	elf_gregset_t pr_reg;	/* GP registers */
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define ELF_PRARGSZ	(80)	/* Number of chars for args */
+
+struct elf_prpsinfo
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned long pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ 
+#endif
+
+#ifdef __KERNEL__
+static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
+{
+#ifdef ELF_CORE_COPY_REGS
+	ELF_CORE_COPY_REGS((*elfregs), regs)
+#else
+	BUG_ON(sizeof(*elfregs) != sizeof(*regs));
+	*(struct pt_regs *)elfregs = *regs;
+#endif
+}
+
+static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
+{
+#ifdef ELF_CORE_COPY_TASK_REGS
+	
+	return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#endif
+	return 0;
+}
+
+extern int dump_fpu (struct pt_regs *, elf_fpregset_t *);
+
+static inline int elf_core_copy_task_fpregs(struct task_struct *t, struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+#ifdef ELF_CORE_COPY_FPREGS
+	return ELF_CORE_COPY_FPREGS(t, fpu);
+#else
+	return dump_fpu(regs, fpu);
+#endif
+}
+
+#ifdef ELF_CORE_COPY_XFPREGS
+static inline int elf_core_copy_task_xfpregs(struct task_struct *t, elf_fpxregset_t *xfpu)
+{
+	return ELF_CORE_COPY_XFPREGS(t, xfpu);
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+
+#endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/err.h b/include/linux/err.h
new file mode 100644
index 000000000000..17c55df13615
--- /dev/null
+++ b/include/linux/err.h
@@ -0,0 +1,31 @@
+#ifndef _LINUX_ERR_H
+#define _LINUX_ERR_H
+
+#include <linux/compiler.h>
+
+#include <asm/errno.h>
+
+/*
+ * Kernel pointers have redundant information, so we can use a
+ * scheme where we can return either an error code or a dentry
+ * pointer with the same return value.
+ *
+ * This should be a per-architecture thing, to allow different
+ * error and pointer decisions.
+ */
+static inline void *ERR_PTR(long error)
+{
+	return (void *) error;
+}
+
+static inline long PTR_ERR(const void *ptr)
+{
+	return (long) ptr;
+}
+
+static inline long IS_ERR(const void *ptr)
+{
+	return unlikely((unsigned long)ptr > (unsigned long)-1000L);
+}
+
+#endif /* _LINUX_ERR_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
new file mode 100644
index 000000000000..d90b80f9b28c
--- /dev/null
+++ b/include/linux/errno.h
@@ -0,0 +1,29 @@
+#ifndef _LINUX_ERRNO_H
+#define _LINUX_ERRNO_H
+
+#include <asm/errno.h>
+
+#ifdef __KERNEL__
+
+/* Should never be seen by user programs */
+#define ERESTARTSYS	512
+#define ERESTARTNOINTR	513
+#define ERESTARTNOHAND	514	/* restart if no handler.. */
+#define ENOIOCTLCMD	515	/* No ioctl command */
+#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
+
+/* Defined for the NFSv3 protocol */
+#define EBADHANDLE	521	/* Illegal NFS file handle */
+#define ENOTSYNC	522	/* Update synchronization mismatch */
+#define EBADCOOKIE	523	/* Cookie is stale */
+#define ENOTSUPP	524	/* Operation is not supported */
+#define ETOOSMALL	525	/* Buffer or request is too small */
+#define ESERVERFAULT	526	/* An untranslatable error occurred */
+#define EBADTYPE	527	/* Type not supported by server */
+#define EJUKEBOX	528	/* Request initiated, but will not complete before timeout */
+#define EIOCBQUEUED	529	/* iocb queued, will get completion event */
+#define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
+
+#endif
+
+#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
new file mode 100644
index 000000000000..174582fedb8b
--- /dev/null
+++ b/include/linux/errqueue.h
@@ -0,0 +1,47 @@
+#ifndef _LINUX_ERRQUEUE_H
+#define _LINUX_ERRQUEUE_H 1
+
+struct sock_extended_err
+{
+	__u32	ee_errno;	
+	__u8	ee_origin;
+	__u8	ee_type;
+	__u8	ee_code;
+	__u8	ee_pad;
+	__u32   ee_info;
+	__u32   ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE	0
+#define SO_EE_ORIGIN_LOCAL	1
+#define SO_EE_ORIGIN_ICMP	2
+#define SO_EE_ORIGIN_ICMP6	3
+
+#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <net/ip.h>
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+#include <linux/ipv6.h>
+#endif
+
+#define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
+
+struct sock_exterr_skb
+{
+	union {
+		struct inet_skb_parm	h4;
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+		struct inet6_skb_parm	h6;
+#endif
+	} header;
+	struct sock_extended_err	ee;
+	u16				addr_offset;
+	u16				port;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
new file mode 100644
index 000000000000..396c48cbaeb1
--- /dev/null
+++ b/include/linux/etherdevice.h
@@ -0,0 +1,88 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Ethernet handlers.
+ *
+ * Version:	@(#)eth.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_ETHERDEVICE_H
+#define _LINUX_ETHERDEVICE_H
+
+#include <linux/if_ether.h>
+#include <linux/random.h>
+
+#ifdef __KERNEL__
+extern int		eth_header(struct sk_buff *skb, struct net_device *dev,
+				   unsigned short type, void *daddr,
+				   void *saddr, unsigned len);
+extern int		eth_rebuild_header(struct sk_buff *skb);
+extern unsigned short	eth_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern void		eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
+						unsigned char * haddr);
+extern int		eth_header_cache(struct neighbour *neigh,
+					 struct hh_cache *hh);
+
+extern struct net_device *alloc_etherdev(int sizeof_priv);
+static inline void eth_copy_and_sum (struct sk_buff *dest, 
+				     const unsigned char *src, 
+				     int len, int base)
+{
+	memcpy (dest->data, src, len);
+}
+
+/**
+ * is_zero_ether_addr - Determine if give Ethernet address is all
+ * zeros.
+ */
+static inline int is_zero_ether_addr(const u8 *addr)
+{
+	return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
+}
+
+/**
+ * is_valid_ether_addr - Determine if the given Ethernet address is valid
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.  The multicast
+ * and FF:FF:... tests are combined into the single test "!(addr[0]&1)".
+ *
+ * Return true if the address is valid.
+ */
+static inline int is_valid_ether_addr(const u8 *addr)
+{
+	return !(addr[0]&1) && !is_zero_ether_addr(addr);
+}
+
+/**
+ * random_ether_addr - Generate software assigned random Ethernet address
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Generate a random Ethernet address (MAC) that is not multicast
+ * and has the local assigned bit set.
+ */
+static inline void random_ether_addr(u8 *addr)
+{
+	get_random_bytes (addr, ETH_ALEN);
+	addr [0] &= 0xfe;	/* clear multicast bit */
+	addr [0] |= 0x02;	/* set local assignment bit (IEEE802) */
+}
+#endif
+
+#endif	/* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 000000000000..c85b210490ea
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,471 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	u32	cmd;
+	u32	supported;	/* Features this interface supports */
+	u32	advertising;	/* Features this interface advertises */
+	u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	u8	duplex;		/* Duplex, half or full */
+	u8	port;		/* Which connector port */
+	u8	phy_address;
+	u8	transceiver;	/* Which transceiver to use */
+	u8	autoneg;	/* Enable or disable autonegotiation */
+	u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	u32	reserved[4];
+};
+
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[32];	/* firmware version string, if applicable */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[16];
+	u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	u32	testinfo_len;
+	u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	u32	cmd;
+	u32	supported;
+	u32	wolopts;
+	u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	u32	cmd;
+	u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	u32	cmd;
+	u32	version; /* driver-specific, indicates different chips/revs */
+	u32	len; /* bytes */
+	u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	u32	cmd;
+	u32	magic;
+	u32	offset; /* in bytes */
+	u32	len; /* in bytes */
+	u8	data[0];
+};
+
+/* for configuring coalescing parameters of chip */
+struct ethtool_coalesce {
+	u32	cmd;	/* ETHTOOL_{G,S}COALESCE */
+
+	/* How many usecs to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_max_coalesced_frames
+	 * is used.
+	 */
+	u32	rx_coalesce_usecs;
+
+	/* How many packets to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause RX interrupts to never be
+	 * generated.
+	 */
+	u32	rx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	u32	rx_coalesce_usecs_irq;
+	u32	rx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_max_coalesced_frames
+	 * is used.
+	 */
+	u32	tx_coalesce_usecs;
+
+	/* How many packets to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause TX interrupts to never be
+	 * generated.
+	 */
+	u32	tx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	u32	tx_coalesce_usecs_irq;
+	u32	tx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay in-memory statistics
+	 * block updates.  Some drivers do not have an in-memory
+	 * statistic block, and in such cases this value is ignored.
+	 * This value must not be zero.
+	 */
+	u32	stats_block_coalesce_usecs;
+
+	/* Adaptive RX/TX coalescing is an algorithm implemented by
+	 * some drivers to improve latency under low packet rates and
+	 * improve throughput under high packet rates.  Some drivers
+	 * only implement one of RX or TX adaptive coalescing.  Anything
+	 * not implemented by the driver causes these values to be
+	 * silently ignored.
+	 */
+	u32	use_adaptive_rx_coalesce;
+	u32	use_adaptive_tx_coalesce;
+
+	/* When the packet rate (measured in packets per second)
+	 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+	 * used.
+	 */
+	u32	pkt_rate_low;
+	u32	rx_coalesce_usecs_low;
+	u32	rx_max_coalesced_frames_low;
+	u32	tx_coalesce_usecs_low;
+	u32	tx_max_coalesced_frames_low;
+
+	/* When the packet rate is below pkt_rate_high but above
+	 * pkt_rate_low (both measured in packets per second) the
+	 * normal {rx,tx}_* coalescing parameters are used.
+	 */
+
+	/* When the packet rate is (measured in packets per second)
+	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+	 * used.
+	 */
+	u32	pkt_rate_high;
+	u32	rx_coalesce_usecs_high;
+	u32	rx_max_coalesced_frames_high;
+	u32	tx_coalesce_usecs_high;
+	u32	tx_max_coalesced_frames_high;
+
+	/* How often to do adaptive coalescing packet rate sampling,
+	 * measured in seconds.  Must not be zero.
+	 */
+	u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	u32	rx_max_pending;
+	u32	rx_mini_max_pending;
+	u32	rx_jumbo_max_pending;
+	u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	u32	rx_pending;
+	u32	rx_mini_pending;
+	u32	rx_jumbo_pending;
+	u32	tx_pending;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autonet' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	u32	autoneg;
+	u32	rx_pause;
+	u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	u32	cmd;		/* ETHTOOL_GSTRINGS */
+	u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	u32	len;		/* number of strings in the string set */
+	u8	data[0];
+};
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
+	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	u32	cmd;		/* ETHTOOL_TEST */
+	u32	flags;		/* ETH_TEST_FL_xxx */
+	u32	reserved;
+	u32	len;		/* result length, in number of u64 elements */
+	u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	u32	cmd;		/* ETHTOOL_GSTATS */
+	u32	n_stats;	/* number of u64's being returned */
+	u64	data[0];
+};
+
+struct net_device;
+
+/* Some generic methods drivers may use in their ethtool_ops */
+u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_tx_csum(struct net_device *dev);
+int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
+u32 ethtool_op_get_sg(struct net_device *dev);
+int ethtool_op_set_sg(struct net_device *dev, u32 data);
+u32 ethtool_op_get_tso(struct net_device *dev);
+int ethtool_op_set_tso(struct net_device *dev, u32 data);
+
+/**
+ * &ethtool_ops - Alter and report network device settings
+ * get_settings: Get device-specific settings
+ * set_settings: Set device-specific settings
+ * get_drvinfo: Report driver information
+ * get_regs: Get device registers
+ * get_wol: Report whether Wake-on-Lan is enabled
+ * set_wol: Turn Wake-on-Lan on or off
+ * get_msglevel: Report driver message level
+ * set_msglevel: Set driver message level
+ * nway_reset: Restart autonegotiation
+ * get_link: Get link status
+ * get_eeprom: Read data from the device EEPROM
+ * set_eeprom: Write data to the device EEPROM
+ * get_coalesce: Get interrupt coalescing parameters
+ * set_coalesce: Set interrupt coalescing parameters
+ * get_ringparam: Report ring sizes
+ * set_ringparam: Set ring sizes
+ * get_pauseparam: Report pause parameters
+ * set_pauseparam: Set pause paramters
+ * get_rx_csum: Report whether receive checksums are turned on or off
+ * set_rx_csum: Turn receive checksum on or off
+ * get_tx_csum: Report whether transmit checksums are turned on or off
+ * set_tx_csum: Turn transmit checksums on or off
+ * get_sg: Report whether scatter-gather is enabled
+ * set_sg: Turn scatter-gather on or off
+ * get_tso: Report whether TCP segmentation offload is enabled
+ * set_tso: Turn TCP segmentation offload on or off
+ * self_test: Run specified self-tests
+ * get_strings: Return a set of strings that describe the requested objects 
+ * phys_id: Identify the device
+ * get_stats: Return statistics about the device
+ *
+ * Description:
+ *
+ * get_settings:
+ *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
+ *	an negative errno or zero.
+ *
+ * set_settings:
+ *	@set_settings is passed an &ethtool_cmd and should attempt to set
+ *	all the settings this device supports.  It may return an error value
+ *	if something goes wrong (otherwise 0).
+ *
+ * get_eeprom:
+ *	Should fill in the magic field.  Don't need to check len for zero
+ *	or wraparound.  Fill in the data argument with the eeprom values
+ *	from offset to offset + len.  Update len to the amount read.
+ *	Returns an error or zero.
+ *
+ * set_eeprom:
+ *	Should validate the magic field.  Don't need to check len for zero
+ *	or wraparound.  Update len to the amount written.  Returns an error
+ *	or zero.
+ */
+struct ethtool_ops {
+	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
+	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
+	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
+	int	(*get_regs_len)(struct net_device *);
+	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
+	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
+	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
+	u32	(*get_msglevel)(struct net_device *);
+	void	(*set_msglevel)(struct net_device *, u32);
+	int	(*nway_reset)(struct net_device *);
+	u32	(*get_link)(struct net_device *);
+	int	(*get_eeprom_len)(struct net_device *);
+	int	(*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+	int	(*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	void	(*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
+	int	(*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
+	void	(*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+	int	(*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+	u32	(*get_rx_csum)(struct net_device *);
+	int	(*set_rx_csum)(struct net_device *, u32);
+	u32	(*get_tx_csum)(struct net_device *);
+	int	(*set_tx_csum)(struct net_device *, u32);
+	u32	(*get_sg)(struct net_device *);
+	int	(*set_sg)(struct net_device *, u32);
+	u32	(*get_tso)(struct net_device *);
+	int	(*set_tso)(struct net_device *, u32);
+	int	(*self_test_count)(struct net_device *);
+	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
+	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*phys_id)(struct net_device *, u32);
+	int	(*get_stats_count)(struct net_device *);
+	void	(*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
+	int	(*begin)(struct net_device *);
+	void	(*complete)(struct net_device *);
+};
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+#define ETHTOOL_GLINK		0x0000000a /* Get link status (ethtool_value) */
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was foced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_10000		10000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
new file mode 100644
index 000000000000..1289f0ec4c00
--- /dev/null
+++ b/include/linux/eventpoll.h
@@ -0,0 +1,99 @@
+/*
+ *  include/linux/eventpoll.h ( Efficent event polling implementation )
+ *  Copyright (C) 2001,...,2003	 Davide Libenzi
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_EVENTPOLL_H
+#define _LINUX_EVENTPOLL_H
+
+#include <linux/types.h>
+
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/* 
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+	__u32 events;
+	__u64 data;
+} EPOLL_PACKED;
+
+#ifdef __KERNEL__
+
+/* Forward declarations to avoid compiler errors */
+struct file;
+
+
+#ifdef CONFIG_EPOLL
+
+/* Used to initialize the epoll bits inside the "struct file" */
+void eventpoll_init_file(struct file *file);
+
+/* Used to release the epoll bits inside the "struct file" */
+void eventpoll_release_file(struct file *file);
+
+/*
+ * This is called from inside fs/file_table.c:__fput() to unlink files
+ * from the eventpoll interface. We need to have this facility to cleanup
+ * correctly files that are closed without being removed from the eventpoll
+ * interface.
+ */
+static inline void eventpoll_release(struct file *file)
+{
+
+	/*
+	 * Fast check to avoid the get/release of the semaphore. Since
+	 * we're doing this outside the semaphore lock, it might return
+	 * false negatives, but we don't care. It'll help in 99.99% of cases
+	 * to avoid the semaphore lock. False positives simply cannot happen
+	 * because the file in on the way to be removed and nobody ( but
+	 * eventpoll ) has still a reference to this file.
+	 */
+	if (likely(list_empty(&file->f_ep_links)))
+		return;
+
+	/*
+	 * The file is being closed while it is still linked to an epoll
+	 * descriptor. We need to handle this by correctly unlinking it
+	 * from its containers.
+	 */
+	eventpoll_release_file(file);
+}
+
+
+#else
+
+static inline void eventpoll_init_file(struct file *file) {}
+static inline void eventpoll_release(struct file *file) {}
+
+#endif
+
+#endif /* #ifdef __KERNEL__ */
+
+#endif /* #ifndef _LINUX_EVENTPOLL_H */
+
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
new file mode 100644
index 000000000000..fab43527e597
--- /dev/null
+++ b/include/linux/ext2_fs.h
@@ -0,0 +1,553 @@
+/*
+ *  linux/include/linux/ext2_fs.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT2_FS_H
+#define _LINUX_EXT2_FS_H
+
+#include <linux/types.h>
+#include <linux/ext2_fs_sb.h>
+
+/*
+ * The second extended filesystem constants/structures
+ */
+
+/*
+ * Define EXT2FS_DEBUG to produce debug messages
+ */
+#undef EXT2FS_DEBUG
+
+/*
+ * Define EXT2_PREALLOCATE to preallocate data blocks for expanding files
+ */
+#define EXT2_PREALLOCATE
+#define EXT2_DEFAULT_PREALLOC_BLOCKS	8
+
+/*
+ * The second extended file system version
+ */
+#define EXT2FS_DATE		"95/08/09"
+#define EXT2FS_VERSION		"0.5b"
+
+/*
+ * Debug code
+ */
+#ifdef EXT2FS_DEBUG
+#	define ext2_debug(f, a...)	{ \
+					printk ("EXT2-fs DEBUG (%s, %d): %s:", \
+						__FILE__, __LINE__, __FUNCTION__); \
+				  	printk (f, ## a); \
+					}
+#else
+#	define ext2_debug(f, a...)	/**/
+#endif
+
+/*
+ * Special inode numbers
+ */
+#define	EXT2_BAD_INO		 1	/* Bad blocks inode */
+#define EXT2_ROOT_INO		 2	/* Root inode */
+#define EXT2_BOOT_LOADER_INO	 5	/* Boot loader inode */
+#define EXT2_UNDEL_DIR_INO	 6	/* Undelete directory inode */
+
+/* First non-reserved inode for old ext2 filesystems */
+#define EXT2_GOOD_OLD_FIRST_INO	11
+
+/*
+ * The second extended file system magic number
+ */
+#define EXT2_SUPER_MAGIC	0xEF53
+
+#ifdef __KERNEL__
+static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+#else
+/* Assume that user mode programs are passing in an ext2fs superblock, not
+ * a kernel struct super_block.  This will allow us to call the feature-test
+ * macros from user land. */
+#define EXT2_SB(sb)	(sb)
+#endif
+
+/*
+ * Maximal count of links to a file
+ */
+#define EXT2_LINK_MAX		32000
+
+/*
+ * Macro-instructions used to manage several block sizes
+ */
+#define EXT2_MIN_BLOCK_SIZE		1024
+#define	EXT2_MAX_BLOCK_SIZE		4096
+#define EXT2_MIN_BLOCK_LOG_SIZE		  10
+#ifdef __KERNEL__
+# define EXT2_BLOCK_SIZE(s)		((s)->s_blocksize)
+#else
+# define EXT2_BLOCK_SIZE(s)		(EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)
+#endif
+#define	EXT2_ADDR_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / sizeof (__u32))
+#ifdef __KERNEL__
+# define EXT2_BLOCK_SIZE_BITS(s)	((s)->s_blocksize_bits)
+#else
+# define EXT2_BLOCK_SIZE_BITS(s)	((s)->s_log_block_size + 10)
+#endif
+#ifdef __KERNEL__
+#define	EXT2_ADDR_PER_BLOCK_BITS(s)	(EXT2_SB(s)->s_addr_per_block_bits)
+#define EXT2_INODE_SIZE(s)		(EXT2_SB(s)->s_inode_size)
+#define EXT2_FIRST_INO(s)		(EXT2_SB(s)->s_first_ino)
+#else
+#define EXT2_INODE_SIZE(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
+				 EXT2_GOOD_OLD_INODE_SIZE : \
+				 (s)->s_inode_size)
+#define EXT2_FIRST_INO(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
+				 EXT2_GOOD_OLD_FIRST_INO : \
+				 (s)->s_first_ino)
+#endif
+
+/*
+ * Macro-instructions used to manage fragments
+ */
+#define EXT2_MIN_FRAG_SIZE		1024
+#define	EXT2_MAX_FRAG_SIZE		4096
+#define EXT2_MIN_FRAG_LOG_SIZE		  10
+#ifdef __KERNEL__
+# define EXT2_FRAG_SIZE(s)		(EXT2_SB(s)->s_frag_size)
+# define EXT2_FRAGS_PER_BLOCK(s)	(EXT2_SB(s)->s_frags_per_block)
+#else
+# define EXT2_FRAG_SIZE(s)		(EXT2_MIN_FRAG_SIZE << (s)->s_log_frag_size)
+# define EXT2_FRAGS_PER_BLOCK(s)	(EXT2_BLOCK_SIZE(s) / EXT2_FRAG_SIZE(s))
+#endif
+
+/*
+ * Structure of a blocks group descriptor
+ */
+struct ext2_group_desc
+{
+	__le32	bg_block_bitmap;		/* Blocks bitmap block */
+	__le32	bg_inode_bitmap;		/* Inodes bitmap block */
+	__le32	bg_inode_table;		/* Inodes table block */
+	__le16	bg_free_blocks_count;	/* Free blocks count */
+	__le16	bg_free_inodes_count;	/* Free inodes count */
+	__le16	bg_used_dirs_count;	/* Directories count */
+	__le16	bg_pad;
+	__le32	bg_reserved[3];
+};
+
+/*
+ * Macro-instructions used to manage group descriptors
+ */
+#ifdef __KERNEL__
+# define EXT2_BLOCKS_PER_GROUP(s)	(EXT2_SB(s)->s_blocks_per_group)
+# define EXT2_DESC_PER_BLOCK(s)		(EXT2_SB(s)->s_desc_per_block)
+# define EXT2_INODES_PER_GROUP(s)	(EXT2_SB(s)->s_inodes_per_group)
+# define EXT2_DESC_PER_BLOCK_BITS(s)	(EXT2_SB(s)->s_desc_per_block_bits)
+#else
+# define EXT2_BLOCKS_PER_GROUP(s)	((s)->s_blocks_per_group)
+# define EXT2_DESC_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc))
+# define EXT2_INODES_PER_GROUP(s)	((s)->s_inodes_per_group)
+#endif
+
+/*
+ * Constants relative to the data blocks
+ */
+#define	EXT2_NDIR_BLOCKS		12
+#define	EXT2_IND_BLOCK			EXT2_NDIR_BLOCKS
+#define	EXT2_DIND_BLOCK			(EXT2_IND_BLOCK + 1)
+#define	EXT2_TIND_BLOCK			(EXT2_DIND_BLOCK + 1)
+#define	EXT2_N_BLOCKS			(EXT2_TIND_BLOCK + 1)
+
+/*
+ * Inode flags
+ */
+#define	EXT2_SECRM_FL			0x00000001 /* Secure deletion */
+#define	EXT2_UNRM_FL			0x00000002 /* Undelete */
+#define	EXT2_COMPR_FL			0x00000004 /* Compress file */
+#define EXT2_SYNC_FL			0x00000008 /* Synchronous updates */
+#define EXT2_IMMUTABLE_FL		0x00000010 /* Immutable file */
+#define EXT2_APPEND_FL			0x00000020 /* writes to file may only append */
+#define EXT2_NODUMP_FL			0x00000040 /* do not dump file */
+#define EXT2_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define EXT2_DIRTY_FL			0x00000100
+#define EXT2_COMPRBLK_FL		0x00000200 /* One or more compressed clusters */
+#define EXT2_NOCOMP_FL			0x00000400 /* Don't compress */
+#define EXT2_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */	
+#define EXT2_BTREE_FL			0x00001000 /* btree format dir */
+#define EXT2_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define EXT2_IMAGIC_FL			0x00002000 /* AFS directory */
+#define EXT2_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define EXT2_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define EXT2_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define EXT2_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define EXT2_RESERVED_FL		0x80000000 /* reserved for ext2 lib */
+
+#define EXT2_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define EXT2_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+/*
+ * ioctl commands
+ */
+#define	EXT2_IOC_GETFLAGS		_IOR('f', 1, long)
+#define	EXT2_IOC_SETFLAGS		_IOW('f', 2, long)
+#define	EXT2_IOC_GETVERSION		_IOR('v', 1, long)
+#define	EXT2_IOC_SETVERSION		_IOW('v', 2, long)
+
+/*
+ * Structure of an inode on the disk
+ */
+struct ext2_inode {
+	__le16	i_mode;		/* File mode */
+	__le16	i_uid;		/* Low 16 bits of Owner Uid */
+	__le32	i_size;		/* Size in bytes */
+	__le32	i_atime;	/* Access time */
+	__le32	i_ctime;	/* Creation time */
+	__le32	i_mtime;	/* Modification time */
+	__le32	i_dtime;	/* Deletion Time */
+	__le16	i_gid;		/* Low 16 bits of Group Id */
+	__le16	i_links_count;	/* Links count */
+	__le32	i_blocks;	/* Blocks count */
+	__le32	i_flags;	/* File flags */
+	union {
+		struct {
+			__le32  l_i_reserved1;
+		} linux1;
+		struct {
+			__le32  h_i_translator;
+		} hurd1;
+		struct {
+			__le32  m_i_reserved1;
+		} masix1;
+	} osd1;				/* OS dependent 1 */
+	__le32	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
+	__le32	i_generation;	/* File version (for NFS) */
+	__le32	i_file_acl;	/* File ACL */
+	__le32	i_dir_acl;	/* Directory ACL */
+	__le32	i_faddr;	/* Fragment address */
+	union {
+		struct {
+			__u8	l_i_frag;	/* Fragment number */
+			__u8	l_i_fsize;	/* Fragment size */
+			__u16	i_pad1;
+			__le16	l_i_uid_high;	/* these 2 fields    */
+			__le16	l_i_gid_high;	/* were reserved2[0] */
+			__u32	l_i_reserved2;
+		} linux2;
+		struct {
+			__u8	h_i_frag;	/* Fragment number */
+			__u8	h_i_fsize;	/* Fragment size */
+			__le16	h_i_mode_high;
+			__le16	h_i_uid_high;
+			__le16	h_i_gid_high;
+			__le32	h_i_author;
+		} hurd2;
+		struct {
+			__u8	m_i_frag;	/* Fragment number */
+			__u8	m_i_fsize;	/* Fragment size */
+			__u16	m_pad1;
+			__u32	m_i_reserved2[2];
+		} masix2;
+	} osd2;				/* OS dependent 2 */
+};
+
+#define i_size_high	i_dir_acl
+
+#if defined(__KERNEL__) || defined(__linux__)
+#define i_reserved1	osd1.linux1.l_i_reserved1
+#define i_frag		osd2.linux2.l_i_frag
+#define i_fsize		osd2.linux2.l_i_fsize
+#define i_uid_low	i_uid
+#define i_gid_low	i_gid
+#define i_uid_high	osd2.linux2.l_i_uid_high
+#define i_gid_high	osd2.linux2.l_i_gid_high
+#define i_reserved2	osd2.linux2.l_i_reserved2
+#endif
+
+#ifdef	__hurd__
+#define i_translator	osd1.hurd1.h_i_translator
+#define i_frag		osd2.hurd2.h_i_frag;
+#define i_fsize		osd2.hurd2.h_i_fsize;
+#define i_uid_high	osd2.hurd2.h_i_uid_high
+#define i_gid_high	osd2.hurd2.h_i_gid_high
+#define i_author	osd2.hurd2.h_i_author
+#endif
+
+#ifdef	__masix__
+#define i_reserved1	osd1.masix1.m_i_reserved1
+#define i_frag		osd2.masix2.m_i_frag
+#define i_fsize		osd2.masix2.m_i_fsize
+#define i_reserved2	osd2.masix2.m_i_reserved2
+#endif
+
+/*
+ * File system states
+ */
+#define	EXT2_VALID_FS			0x0001	/* Unmounted cleanly */
+#define	EXT2_ERROR_FS			0x0002	/* Errors detected */
+
+/*
+ * Mount flags
+ */
+#define EXT2_MOUNT_CHECK		0x0001	/* Do mount-time checks */
+#define EXT2_MOUNT_OLDALLOC		0x0002  /* Don't use the new Orlov allocator */
+#define EXT2_MOUNT_GRPID		0x0004	/* Create files with directory's group */
+#define EXT2_MOUNT_DEBUG		0x0008	/* Some debugging messages */
+#define EXT2_MOUNT_ERRORS_CONT		0x0010	/* Continue on errors */
+#define EXT2_MOUNT_ERRORS_RO		0x0020	/* Remount fs ro on errors */
+#define EXT2_MOUNT_ERRORS_PANIC		0x0040	/* Panic on errors */
+#define EXT2_MOUNT_MINIX_DF		0x0080	/* Mimics the Minix statfs */
+#define EXT2_MOUNT_NOBH			0x0100	/* No buffer_heads */
+#define EXT2_MOUNT_NO_UID32		0x0200  /* Disable 32-bit UIDs */
+#define EXT2_MOUNT_XATTR_USER		0x4000	/* Extended user attributes */
+#define EXT2_MOUNT_POSIX_ACL		0x8000	/* POSIX Access Control Lists */
+
+#define clear_opt(o, opt)		o &= ~EXT2_MOUNT_##opt
+#define set_opt(o, opt)			o |= EXT2_MOUNT_##opt
+#define test_opt(sb, opt)		(EXT2_SB(sb)->s_mount_opt & \
+					 EXT2_MOUNT_##opt)
+/*
+ * Maximal mount counts between two filesystem checks
+ */
+#define EXT2_DFL_MAX_MNT_COUNT		20	/* Allow 20 mounts */
+#define EXT2_DFL_CHECKINTERVAL		0	/* Don't use interval check */
+
+/*
+ * Behaviour when detecting errors
+ */
+#define EXT2_ERRORS_CONTINUE		1	/* Continue execution */
+#define EXT2_ERRORS_RO			2	/* Remount fs read-only */
+#define EXT2_ERRORS_PANIC		3	/* Panic */
+#define EXT2_ERRORS_DEFAULT		EXT2_ERRORS_CONTINUE
+
+/*
+ * Structure of the super block
+ */
+struct ext2_super_block {
+	__le32	s_inodes_count;		/* Inodes count */
+	__le32	s_blocks_count;		/* Blocks count */
+	__le32	s_r_blocks_count;	/* Reserved blocks count */
+	__le32	s_free_blocks_count;	/* Free blocks count */
+	__le32	s_free_inodes_count;	/* Free inodes count */
+	__le32	s_first_data_block;	/* First Data Block */
+	__le32	s_log_block_size;	/* Block size */
+	__le32	s_log_frag_size;	/* Fragment size */
+	__le32	s_blocks_per_group;	/* # Blocks per group */
+	__le32	s_frags_per_group;	/* # Fragments per group */
+	__le32	s_inodes_per_group;	/* # Inodes per group */
+	__le32	s_mtime;		/* Mount time */
+	__le32	s_wtime;		/* Write time */
+	__le16	s_mnt_count;		/* Mount count */
+	__le16	s_max_mnt_count;	/* Maximal mount count */
+	__le16	s_magic;		/* Magic signature */
+	__le16	s_state;		/* File system state */
+	__le16	s_errors;		/* Behaviour when detecting errors */
+	__le16	s_minor_rev_level; 	/* minor revision level */
+	__le32	s_lastcheck;		/* time of last check */
+	__le32	s_checkinterval;	/* max. time between checks */
+	__le32	s_creator_os;		/* OS */
+	__le32	s_rev_level;		/* Revision level */
+	__le16	s_def_resuid;		/* Default uid for reserved blocks */
+	__le16	s_def_resgid;		/* Default gid for reserved blocks */
+	/*
+	 * These fields are for EXT2_DYNAMIC_REV superblocks only.
+	 *
+	 * Note: the difference between the compatible feature set and
+	 * the incompatible feature set is that if there is a bit set
+	 * in the incompatible feature set that the kernel doesn't
+	 * know about, it should refuse to mount the filesystem.
+	 * 
+	 * e2fsck's requirements are more strict; if it doesn't know
+	 * about a feature in either the compatible or incompatible
+	 * feature set, it must abort and not try to meddle with
+	 * things it doesn't understand...
+	 */
+	__le32	s_first_ino; 		/* First non-reserved inode */
+	__le16   s_inode_size; 		/* size of inode structure */
+	__le16	s_block_group_nr; 	/* block group # of this superblock */
+	__le32	s_feature_compat; 	/* compatible feature set */
+	__le32	s_feature_incompat; 	/* incompatible feature set */
+	__le32	s_feature_ro_compat; 	/* readonly-compatible feature set */
+	__u8	s_uuid[16];		/* 128-bit uuid for volume */
+	char	s_volume_name[16]; 	/* volume name */
+	char	s_last_mounted[64]; 	/* directory where last mounted */
+	__le32	s_algorithm_usage_bitmap; /* For compression */
+	/*
+	 * Performance hints.  Directory preallocation should only
+	 * happen if the EXT2_COMPAT_PREALLOC flag is on.
+	 */
+	__u8	s_prealloc_blocks;	/* Nr of blocks to try to preallocate*/
+	__u8	s_prealloc_dir_blocks;	/* Nr to preallocate for dirs */
+	__u16	s_padding1;
+	/*
+	 * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set.
+	 */
+	__u8	s_journal_uuid[16];	/* uuid of journal superblock */
+	__u32	s_journal_inum;		/* inode number of journal file */
+	__u32	s_journal_dev;		/* device number of journal file */
+	__u32	s_last_orphan;		/* start of list of inodes to delete */
+	__u32	s_hash_seed[4];		/* HTREE hash seed */
+	__u8	s_def_hash_version;	/* Default hash version to use */
+	__u8	s_reserved_char_pad;
+	__u16	s_reserved_word_pad;
+	__le32	s_default_mount_opts;
+ 	__le32	s_first_meta_bg; 	/* First metablock block group */
+	__u32	s_reserved[190];	/* Padding to the end of the block */
+};
+
+/*
+ * Codes for operating systems
+ */
+#define EXT2_OS_LINUX		0
+#define EXT2_OS_HURD		1
+#define EXT2_OS_MASIX		2
+#define EXT2_OS_FREEBSD		3
+#define EXT2_OS_LITES		4
+
+/*
+ * Revision levels
+ */
+#define EXT2_GOOD_OLD_REV	0	/* The good old (original) format */
+#define EXT2_DYNAMIC_REV	1 	/* V2 format w/ dynamic inode sizes */
+
+#define EXT2_CURRENT_REV	EXT2_GOOD_OLD_REV
+#define EXT2_MAX_SUPP_REV	EXT2_DYNAMIC_REV
+
+#define EXT2_GOOD_OLD_INODE_SIZE 128
+
+/*
+ * Feature set definitions
+ */
+
+#define EXT2_HAS_COMPAT_FEATURE(sb,mask)			\
+	( EXT2_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) )
+#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask)			\
+	( EXT2_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) )
+#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask)			\
+	( EXT2_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) )
+#define EXT2_SET_COMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask)
+#define EXT2_SET_RO_COMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask)
+#define EXT2_SET_INCOMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask)
+#define EXT2_CLEAR_COMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask)
+#define EXT2_CLEAR_RO_COMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask)
+#define EXT2_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
+	EXT2_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask)
+
+#define EXT2_FEATURE_COMPAT_DIR_PREALLOC	0x0001
+#define EXT2_FEATURE_COMPAT_IMAGIC_INODES	0x0002
+#define EXT3_FEATURE_COMPAT_HAS_JOURNAL		0x0004
+#define EXT2_FEATURE_COMPAT_EXT_ATTR		0x0008
+#define EXT2_FEATURE_COMPAT_RESIZE_INO		0x0010
+#define EXT2_FEATURE_COMPAT_DIR_INDEX		0x0020
+#define EXT2_FEATURE_COMPAT_ANY			0xffffffff
+
+#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER	0x0001
+#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE	0x0002
+#define EXT2_FEATURE_RO_COMPAT_BTREE_DIR	0x0004
+#define EXT2_FEATURE_RO_COMPAT_ANY		0xffffffff
+
+#define EXT2_FEATURE_INCOMPAT_COMPRESSION	0x0001
+#define EXT2_FEATURE_INCOMPAT_FILETYPE		0x0002
+#define EXT3_FEATURE_INCOMPAT_RECOVER		0x0004
+#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV	0x0008
+#define EXT2_FEATURE_INCOMPAT_META_BG		0x0010
+#define EXT2_FEATURE_INCOMPAT_ANY		0xffffffff
+
+#define EXT2_FEATURE_COMPAT_SUPP	EXT2_FEATURE_COMPAT_EXT_ATTR
+#define EXT2_FEATURE_INCOMPAT_SUPP	(EXT2_FEATURE_INCOMPAT_FILETYPE| \
+					 EXT2_FEATURE_INCOMPAT_META_BG)
+#define EXT2_FEATURE_RO_COMPAT_SUPP	(EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
+					 EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
+					 EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
+#define EXT2_FEATURE_RO_COMPAT_UNSUPPORTED	~EXT2_FEATURE_RO_COMPAT_SUPP
+#define EXT2_FEATURE_INCOMPAT_UNSUPPORTED	~EXT2_FEATURE_INCOMPAT_SUPP
+
+/*
+ * Default values for user and/or group using reserved blocks
+ */
+#define	EXT2_DEF_RESUID		0
+#define	EXT2_DEF_RESGID		0
+
+/*
+ * Default mount options
+ */
+#define EXT2_DEFM_DEBUG		0x0001
+#define EXT2_DEFM_BSDGROUPS	0x0002
+#define EXT2_DEFM_XATTR_USER	0x0004
+#define EXT2_DEFM_ACL		0x0008
+#define EXT2_DEFM_UID16		0x0010
+    /* Not used by ext2, but reserved for use by ext3 */
+#define EXT3_DEFM_JMODE		0x0060 
+#define EXT3_DEFM_JMODE_DATA	0x0020
+#define EXT3_DEFM_JMODE_ORDERED	0x0040
+#define EXT3_DEFM_JMODE_WBACK	0x0060
+
+/*
+ * Structure of a directory entry
+ */
+#define EXT2_NAME_LEN 255
+
+struct ext2_dir_entry {
+	__le32	inode;			/* Inode number */
+	__le16	rec_len;		/* Directory entry length */
+	__le16	name_len;		/* Name length */
+	char	name[EXT2_NAME_LEN];	/* File name */
+};
+
+/*
+ * The new version of the directory entry.  Since EXT2 structures are
+ * stored in intel byte order, and the name_len field could never be
+ * bigger than 255 chars, it's safe to reclaim the extra byte for the
+ * file_type field.
+ */
+struct ext2_dir_entry_2 {
+	__le32	inode;			/* Inode number */
+	__le16	rec_len;		/* Directory entry length */
+	__u8	name_len;		/* Name length */
+	__u8	file_type;
+	char	name[EXT2_NAME_LEN];	/* File name */
+};
+
+/*
+ * Ext2 directory file types.  Only the low 3 bits are used.  The
+ * other bits are reserved for now.
+ */
+enum {
+	EXT2_FT_UNKNOWN,
+	EXT2_FT_REG_FILE,
+	EXT2_FT_DIR,
+	EXT2_FT_CHRDEV,
+	EXT2_FT_BLKDEV,
+	EXT2_FT_FIFO,
+	EXT2_FT_SOCK,
+	EXT2_FT_SYMLINK,
+	EXT2_FT_MAX
+};
+
+/*
+ * EXT2_DIR_PAD defines the directory entries boundaries
+ *
+ * NOTE: It must be a multiple of 4
+ */
+#define EXT2_DIR_PAD		 	4
+#define EXT2_DIR_ROUND 			(EXT2_DIR_PAD - 1)
+#define EXT2_DIR_REC_LEN(name_len)	(((name_len) + 8 + EXT2_DIR_ROUND) & \
+					 ~EXT2_DIR_ROUND)
+
+#endif	/* _LINUX_EXT2_FS_H */
diff --git a/include/linux/ext2_fs_sb.h b/include/linux/ext2_fs_sb.h
new file mode 100644
index 000000000000..4eda0ed76a48
--- /dev/null
+++ b/include/linux/ext2_fs_sb.h
@@ -0,0 +1,58 @@
+/*
+ *  linux/include/linux/ext2_fs_sb.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs_sb.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT2_FS_SB
+#define _LINUX_EXT2_FS_SB
+
+#include <linux/blockgroup_lock.h>
+#include <linux/percpu_counter.h>
+
+/*
+ * second extended-fs super-block data in memory
+ */
+struct ext2_sb_info {
+	unsigned long s_frag_size;	/* Size of a fragment in bytes */
+	unsigned long s_frags_per_block;/* Number of fragments per block */
+	unsigned long s_inodes_per_block;/* Number of inodes per block */
+	unsigned long s_frags_per_group;/* Number of fragments in a group */
+	unsigned long s_blocks_per_group;/* Number of blocks in a group */
+	unsigned long s_inodes_per_group;/* Number of inodes in a group */
+	unsigned long s_itb_per_group;	/* Number of inode table blocks per group */
+	unsigned long s_gdb_count;	/* Number of group descriptor blocks */
+	unsigned long s_desc_per_block;	/* Number of group descriptors per block */
+	unsigned long s_groups_count;	/* Number of groups in the fs */
+	struct buffer_head * s_sbh;	/* Buffer containing the super block */
+	struct ext2_super_block * s_es;	/* Pointer to the super block in the buffer */
+	struct buffer_head ** s_group_desc;
+	unsigned long  s_mount_opt;
+	uid_t s_resuid;
+	gid_t s_resgid;
+	unsigned short s_mount_state;
+	unsigned short s_pad;
+	int s_addr_per_block_bits;
+	int s_desc_per_block_bits;
+	int s_inode_size;
+	int s_first_ino;
+	spinlock_t s_next_gen_lock;
+	u32 s_next_generation;
+	unsigned long s_dir_count;
+	u8 *s_debts;
+	struct percpu_counter s_freeblocks_counter;
+	struct percpu_counter s_freeinodes_counter;
+	struct percpu_counter s_dirs_counter;
+	struct blockgroup_lock s_blockgroup_lock;
+};
+
+#endif	/* _LINUX_EXT2_FS_SB */
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
new file mode 100644
index 000000000000..74ad31781e3e
--- /dev/null
+++ b/include/linux/ext3_fs.h
@@ -0,0 +1,830 @@
+/*
+ *  linux/include/linux/ext3_fs.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT3_FS_H
+#define _LINUX_EXT3_FS_H
+
+#include <linux/types.h>
+#include <linux/ext3_fs_i.h>
+#include <linux/ext3_fs_sb.h>
+
+
+struct statfs;
+
+/*
+ * The second extended filesystem constants/structures
+ */
+
+/*
+ * Define EXT3FS_DEBUG to produce debug messages
+ */
+#undef EXT3FS_DEBUG
+
+/*
+ * Define EXT3_RESERVATION to reserve data blocks for expanding files
+ */
+#define EXT3_DEFAULT_RESERVE_BLOCKS     8
+#define EXT3_MAX_RESERVE_BLOCKS         1024
+#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0
+/*
+ * Always enable hashed directories
+ */
+#define CONFIG_EXT3_INDEX
+
+/*
+ * Debug code
+ */
+#ifdef EXT3FS_DEBUG
+#define ext3_debug(f, a...)						\
+	do {								\
+		printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:",	\
+			__FILE__, __LINE__, __FUNCTION__);		\
+		printk (KERN_DEBUG f, ## a);				\
+	} while (0)
+#else
+#define ext3_debug(f, a...)	do {} while (0)
+#endif
+
+/*
+ * Special inodes numbers
+ */
+#define	EXT3_BAD_INO		 1	/* Bad blocks inode */
+#define EXT3_ROOT_INO		 2	/* Root inode */
+#define EXT3_BOOT_LOADER_INO	 5	/* Boot loader inode */
+#define EXT3_UNDEL_DIR_INO	 6	/* Undelete directory inode */
+#define EXT3_RESIZE_INO		 7	/* Reserved group descriptors inode */
+#define EXT3_JOURNAL_INO	 8	/* Journal inode */
+
+/* First non-reserved inode for old ext3 filesystems */
+#define EXT3_GOOD_OLD_FIRST_INO	11
+
+/*
+ * The second extended file system magic number
+ */
+#define EXT3_SUPER_MAGIC	0xEF53
+
+/*
+ * Maximal count of links to a file
+ */
+#define EXT3_LINK_MAX		32000
+
+/*
+ * Macro-instructions used to manage several block sizes
+ */
+#define EXT3_MIN_BLOCK_SIZE		1024
+#define	EXT3_MAX_BLOCK_SIZE		4096
+#define EXT3_MIN_BLOCK_LOG_SIZE		  10
+#ifdef __KERNEL__
+# define EXT3_BLOCK_SIZE(s)		((s)->s_blocksize)
+#else
+# define EXT3_BLOCK_SIZE(s)		(EXT3_MIN_BLOCK_SIZE << (s)->s_log_block_size)
+#endif
+#define	EXT3_ADDR_PER_BLOCK(s)		(EXT3_BLOCK_SIZE(s) / sizeof (__u32))
+#ifdef __KERNEL__
+# define EXT3_BLOCK_SIZE_BITS(s)	((s)->s_blocksize_bits)
+#else
+# define EXT3_BLOCK_SIZE_BITS(s)	((s)->s_log_block_size + 10)
+#endif
+#ifdef __KERNEL__
+#define	EXT3_ADDR_PER_BLOCK_BITS(s)	(EXT3_SB(s)->s_addr_per_block_bits)
+#define EXT3_INODE_SIZE(s)		(EXT3_SB(s)->s_inode_size)
+#define EXT3_FIRST_INO(s)		(EXT3_SB(s)->s_first_ino)
+#else
+#define EXT3_INODE_SIZE(s)	(((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \
+				 EXT3_GOOD_OLD_INODE_SIZE : \
+				 (s)->s_inode_size)
+#define EXT3_FIRST_INO(s)	(((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \
+				 EXT3_GOOD_OLD_FIRST_INO : \
+				 (s)->s_first_ino)
+#endif
+
+/*
+ * Macro-instructions used to manage fragments
+ */
+#define EXT3_MIN_FRAG_SIZE		1024
+#define	EXT3_MAX_FRAG_SIZE		4096
+#define EXT3_MIN_FRAG_LOG_SIZE		  10
+#ifdef __KERNEL__
+# define EXT3_FRAG_SIZE(s)		(EXT3_SB(s)->s_frag_size)
+# define EXT3_FRAGS_PER_BLOCK(s)	(EXT3_SB(s)->s_frags_per_block)
+#else
+# define EXT3_FRAG_SIZE(s)		(EXT3_MIN_FRAG_SIZE << (s)->s_log_frag_size)
+# define EXT3_FRAGS_PER_BLOCK(s)	(EXT3_BLOCK_SIZE(s) / EXT3_FRAG_SIZE(s))
+#endif
+
+/*
+ * Structure of a blocks group descriptor
+ */
+struct ext3_group_desc
+{
+	__le32	bg_block_bitmap;		/* Blocks bitmap block */
+	__le32	bg_inode_bitmap;		/* Inodes bitmap block */
+	__le32	bg_inode_table;		/* Inodes table block */
+	__le16	bg_free_blocks_count;	/* Free blocks count */
+	__le16	bg_free_inodes_count;	/* Free inodes count */
+	__le16	bg_used_dirs_count;	/* Directories count */
+	__u16	bg_pad;
+	__le32	bg_reserved[3];
+};
+
+/*
+ * Macro-instructions used to manage group descriptors
+ */
+#ifdef __KERNEL__
+# define EXT3_BLOCKS_PER_GROUP(s)	(EXT3_SB(s)->s_blocks_per_group)
+# define EXT3_DESC_PER_BLOCK(s)		(EXT3_SB(s)->s_desc_per_block)
+# define EXT3_INODES_PER_GROUP(s)	(EXT3_SB(s)->s_inodes_per_group)
+# define EXT3_DESC_PER_BLOCK_BITS(s)	(EXT3_SB(s)->s_desc_per_block_bits)
+#else
+# define EXT3_BLOCKS_PER_GROUP(s)	((s)->s_blocks_per_group)
+# define EXT3_DESC_PER_BLOCK(s)		(EXT3_BLOCK_SIZE(s) / sizeof (struct ext3_group_desc))
+# define EXT3_INODES_PER_GROUP(s)	((s)->s_inodes_per_group)
+#endif
+
+/*
+ * Constants relative to the data blocks
+ */
+#define	EXT3_NDIR_BLOCKS		12
+#define	EXT3_IND_BLOCK			EXT3_NDIR_BLOCKS
+#define	EXT3_DIND_BLOCK			(EXT3_IND_BLOCK + 1)
+#define	EXT3_TIND_BLOCK			(EXT3_DIND_BLOCK + 1)
+#define	EXT3_N_BLOCKS			(EXT3_TIND_BLOCK + 1)
+
+/*
+ * Inode flags
+ */
+#define	EXT3_SECRM_FL			0x00000001 /* Secure deletion */
+#define	EXT3_UNRM_FL			0x00000002 /* Undelete */
+#define	EXT3_COMPR_FL			0x00000004 /* Compress file */
+#define EXT3_SYNC_FL			0x00000008 /* Synchronous updates */
+#define EXT3_IMMUTABLE_FL		0x00000010 /* Immutable file */
+#define EXT3_APPEND_FL			0x00000020 /* writes to file may only append */
+#define EXT3_NODUMP_FL			0x00000040 /* do not dump file */
+#define EXT3_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define EXT3_DIRTY_FL			0x00000100
+#define EXT3_COMPRBLK_FL		0x00000200 /* One or more compressed clusters */
+#define EXT3_NOCOMPR_FL			0x00000400 /* Don't compress */
+#define EXT3_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define EXT3_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define EXT3_IMAGIC_FL			0x00002000 /* AFS directory */
+#define EXT3_JOURNAL_DATA_FL		0x00004000 /* file data should be journaled */
+#define EXT3_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define EXT3_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define EXT3_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define EXT3_RESERVED_FL		0x80000000 /* reserved for ext3 lib */
+
+#define EXT3_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define EXT3_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+/*
+ * Inode dynamic state flags
+ */
+#define EXT3_STATE_JDATA		0x00000001 /* journaled data exists */
+#define EXT3_STATE_NEW			0x00000002 /* inode is newly created */
+#define EXT3_STATE_XATTR		0x00000004 /* has in-inode xattrs */
+
+/* Used to pass group descriptor data when online resize is done */
+struct ext3_new_group_input {
+	__u32 group;            /* Group number for this data */
+	__u32 block_bitmap;     /* Absolute block number of block bitmap */
+	__u32 inode_bitmap;     /* Absolute block number of inode bitmap */
+	__u32 inode_table;      /* Absolute block number of inode table start */
+	__u32 blocks_count;     /* Total number of blocks in this group */
+	__u16 reserved_blocks;  /* Number of reserved blocks in this group */
+	__u16 unused;
+};
+
+/* The struct ext3_new_group_input in kernel space, with free_blocks_count */
+struct ext3_new_group_data {
+	__u32 group;
+	__u32 block_bitmap;
+	__u32 inode_bitmap;
+	__u32 inode_table;
+	__u32 blocks_count;
+	__u16 reserved_blocks;
+	__u16 unused;
+	__u32 free_blocks_count;
+};
+
+
+/*
+ * ioctl commands
+ */
+#define	EXT3_IOC_GETFLAGS		_IOR('f', 1, long)
+#define	EXT3_IOC_SETFLAGS		_IOW('f', 2, long)
+#define	EXT3_IOC_GETVERSION		_IOR('f', 3, long)
+#define	EXT3_IOC_SETVERSION		_IOW('f', 4, long)
+#define EXT3_IOC_GROUP_EXTEND		_IOW('f', 7, unsigned long)
+#define EXT3_IOC_GROUP_ADD		_IOW('f', 8,struct ext3_new_group_input)
+#define	EXT3_IOC_GETVERSION_OLD		_IOR('v', 1, long)
+#define	EXT3_IOC_SETVERSION_OLD		_IOW('v', 2, long)
+#ifdef CONFIG_JBD_DEBUG
+#define EXT3_IOC_WAIT_FOR_READONLY	_IOR('f', 99, long)
+#endif
+#define EXT3_IOC_GETRSVSZ		_IOR('f', 5, long)
+#define EXT3_IOC_SETRSVSZ		_IOW('f', 6, long)
+
+/*
+ * Structure of an inode on the disk
+ */
+struct ext3_inode {
+	__le16	i_mode;		/* File mode */
+	__le16	i_uid;		/* Low 16 bits of Owner Uid */
+	__le32	i_size;		/* Size in bytes */
+	__le32	i_atime;	/* Access time */
+	__le32	i_ctime;	/* Creation time */
+	__le32	i_mtime;	/* Modification time */
+	__le32	i_dtime;	/* Deletion Time */
+	__le16	i_gid;		/* Low 16 bits of Group Id */
+	__le16	i_links_count;	/* Links count */
+	__le32	i_blocks;	/* Blocks count */
+	__le32	i_flags;	/* File flags */
+	union {
+		struct {
+			__u32  l_i_reserved1;
+		} linux1;
+		struct {
+			__u32  h_i_translator;
+		} hurd1;
+		struct {
+			__u32  m_i_reserved1;
+		} masix1;
+	} osd1;				/* OS dependent 1 */
+	__le32	i_block[EXT3_N_BLOCKS];/* Pointers to blocks */
+	__le32	i_generation;	/* File version (for NFS) */
+	__le32	i_file_acl;	/* File ACL */
+	__le32	i_dir_acl;	/* Directory ACL */
+	__le32	i_faddr;	/* Fragment address */
+	union {
+		struct {
+			__u8	l_i_frag;	/* Fragment number */
+			__u8	l_i_fsize;	/* Fragment size */
+			__u16	i_pad1;
+			__le16	l_i_uid_high;	/* these 2 fields    */
+			__le16	l_i_gid_high;	/* were reserved2[0] */
+			__u32	l_i_reserved2;
+		} linux2;
+		struct {
+			__u8	h_i_frag;	/* Fragment number */
+			__u8	h_i_fsize;	/* Fragment size */
+			__u16	h_i_mode_high;
+			__u16	h_i_uid_high;
+			__u16	h_i_gid_high;
+			__u32	h_i_author;
+		} hurd2;
+		struct {
+			__u8	m_i_frag;	/* Fragment number */
+			__u8	m_i_fsize;	/* Fragment size */
+			__u16	m_pad1;
+			__u32	m_i_reserved2[2];
+		} masix2;
+	} osd2;				/* OS dependent 2 */
+	__le16	i_extra_isize;
+	__le16	i_pad1;
+};
+
+#define i_size_high	i_dir_acl
+
+#if defined(__KERNEL__) || defined(__linux__)
+#define i_reserved1	osd1.linux1.l_i_reserved1
+#define i_frag		osd2.linux2.l_i_frag
+#define i_fsize		osd2.linux2.l_i_fsize
+#define i_uid_low	i_uid
+#define i_gid_low	i_gid
+#define i_uid_high	osd2.linux2.l_i_uid_high
+#define i_gid_high	osd2.linux2.l_i_gid_high
+#define i_reserved2	osd2.linux2.l_i_reserved2
+
+#elif defined(__GNU__)
+
+#define i_translator	osd1.hurd1.h_i_translator
+#define i_frag		osd2.hurd2.h_i_frag;
+#define i_fsize		osd2.hurd2.h_i_fsize;
+#define i_uid_high	osd2.hurd2.h_i_uid_high
+#define i_gid_high	osd2.hurd2.h_i_gid_high
+#define i_author	osd2.hurd2.h_i_author
+
+#elif defined(__masix__)
+
+#define i_reserved1	osd1.masix1.m_i_reserved1
+#define i_frag		osd2.masix2.m_i_frag
+#define i_fsize		osd2.masix2.m_i_fsize
+#define i_reserved2	osd2.masix2.m_i_reserved2
+
+#endif /* defined(__KERNEL__) || defined(__linux__) */
+
+/*
+ * File system states
+ */
+#define	EXT3_VALID_FS			0x0001	/* Unmounted cleanly */
+#define	EXT3_ERROR_FS			0x0002	/* Errors detected */
+#define	EXT3_ORPHAN_FS			0x0004	/* Orphans being recovered */
+
+/*
+ * Mount flags
+ */
+#define EXT3_MOUNT_CHECK		0x00001	/* Do mount-time checks */
+#define EXT3_MOUNT_OLDALLOC		0x00002  /* Don't use the new Orlov allocator */
+#define EXT3_MOUNT_GRPID		0x00004	/* Create files with directory's group */
+#define EXT3_MOUNT_DEBUG		0x00008	/* Some debugging messages */
+#define EXT3_MOUNT_ERRORS_CONT		0x00010	/* Continue on errors */
+#define EXT3_MOUNT_ERRORS_RO		0x00020	/* Remount fs ro on errors */
+#define EXT3_MOUNT_ERRORS_PANIC		0x00040	/* Panic on errors */
+#define EXT3_MOUNT_MINIX_DF		0x00080	/* Mimics the Minix statfs */
+#define EXT3_MOUNT_NOLOAD		0x00100	/* Don't use existing journal*/
+#define EXT3_MOUNT_ABORT		0x00200	/* Fatal error detected */
+#define EXT3_MOUNT_DATA_FLAGS		0x00C00	/* Mode for data writes: */
+#define EXT3_MOUNT_JOURNAL_DATA		0x00400	/* Write data to journal */
+#define EXT3_MOUNT_ORDERED_DATA		0x00800	/* Flush data before commit */
+#define EXT3_MOUNT_WRITEBACK_DATA	0x00C00	/* No data ordering */
+#define EXT3_MOUNT_UPDATE_JOURNAL	0x01000	/* Update the journal format */
+#define EXT3_MOUNT_NO_UID32		0x02000  /* Disable 32-bit UIDs */
+#define EXT3_MOUNT_XATTR_USER		0x04000	/* Extended user attributes */
+#define EXT3_MOUNT_POSIX_ACL		0x08000	/* POSIX Access Control Lists */
+#define EXT3_MOUNT_RESERVATION		0x10000	/* Preallocation */
+#define EXT3_MOUNT_BARRIER		0x20000 /* Use block barriers */
+#define EXT3_MOUNT_NOBH			0x40000 /* No bufferheads */
+
+/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */
+#ifndef _LINUX_EXT2_FS_H
+#define clear_opt(o, opt)		o &= ~EXT3_MOUNT_##opt
+#define set_opt(o, opt)			o |= EXT3_MOUNT_##opt
+#define test_opt(sb, opt)		(EXT3_SB(sb)->s_mount_opt & \
+					 EXT3_MOUNT_##opt)
+#else
+#define EXT2_MOUNT_NOLOAD		EXT3_MOUNT_NOLOAD
+#define EXT2_MOUNT_ABORT		EXT3_MOUNT_ABORT
+#define EXT2_MOUNT_DATA_FLAGS		EXT3_MOUNT_DATA_FLAGS
+#endif
+
+#define ext3_set_bit			ext2_set_bit
+#define ext3_set_bit_atomic		ext2_set_bit_atomic
+#define ext3_clear_bit			ext2_clear_bit
+#define ext3_clear_bit_atomic		ext2_clear_bit_atomic
+#define ext3_test_bit			ext2_test_bit
+#define ext3_find_first_zero_bit	ext2_find_first_zero_bit
+#define ext3_find_next_zero_bit		ext2_find_next_zero_bit
+
+/*
+ * Maximal mount counts between two filesystem checks
+ */
+#define EXT3_DFL_MAX_MNT_COUNT		20	/* Allow 20 mounts */
+#define EXT3_DFL_CHECKINTERVAL		0	/* Don't use interval check */
+
+/*
+ * Behaviour when detecting errors
+ */
+#define EXT3_ERRORS_CONTINUE		1	/* Continue execution */
+#define EXT3_ERRORS_RO			2	/* Remount fs read-only */
+#define EXT3_ERRORS_PANIC		3	/* Panic */
+#define EXT3_ERRORS_DEFAULT		EXT3_ERRORS_CONTINUE
+
+/*
+ * Structure of the super block
+ */
+struct ext3_super_block {
+/*00*/	__le32	s_inodes_count;		/* Inodes count */
+	__le32	s_blocks_count;		/* Blocks count */
+	__le32	s_r_blocks_count;	/* Reserved blocks count */
+	__le32	s_free_blocks_count;	/* Free blocks count */
+/*10*/	__le32	s_free_inodes_count;	/* Free inodes count */
+	__le32	s_first_data_block;	/* First Data Block */
+	__le32	s_log_block_size;	/* Block size */
+	__le32	s_log_frag_size;	/* Fragment size */
+/*20*/	__le32	s_blocks_per_group;	/* # Blocks per group */
+	__le32	s_frags_per_group;	/* # Fragments per group */
+	__le32	s_inodes_per_group;	/* # Inodes per group */
+	__le32	s_mtime;		/* Mount time */
+/*30*/	__le32	s_wtime;		/* Write time */
+	__le16	s_mnt_count;		/* Mount count */
+	__le16	s_max_mnt_count;	/* Maximal mount count */
+	__le16	s_magic;		/* Magic signature */
+	__le16	s_state;		/* File system state */
+	__le16	s_errors;		/* Behaviour when detecting errors */
+	__le16	s_minor_rev_level;	/* minor revision level */
+/*40*/	__le32	s_lastcheck;		/* time of last check */
+	__le32	s_checkinterval;	/* max. time between checks */
+	__le32	s_creator_os;		/* OS */
+	__le32	s_rev_level;		/* Revision level */
+/*50*/	__le16	s_def_resuid;		/* Default uid for reserved blocks */
+	__le16	s_def_resgid;		/* Default gid for reserved blocks */
+	/*
+	 * These fields are for EXT3_DYNAMIC_REV superblocks only.
+	 *
+	 * Note: the difference between the compatible feature set and
+	 * the incompatible feature set is that if there is a bit set
+	 * in the incompatible feature set that the kernel doesn't
+	 * know about, it should refuse to mount the filesystem.
+	 *
+	 * e2fsck's requirements are more strict; if it doesn't know
+	 * about a feature in either the compatible or incompatible
+	 * feature set, it must abort and not try to meddle with
+	 * things it doesn't understand...
+	 */
+	__le32	s_first_ino;		/* First non-reserved inode */
+	__le16   s_inode_size;		/* size of inode structure */
+	__le16	s_block_group_nr;	/* block group # of this superblock */
+	__le32	s_feature_compat;	/* compatible feature set */
+/*60*/	__le32	s_feature_incompat;	/* incompatible feature set */
+	__le32	s_feature_ro_compat;	/* readonly-compatible feature set */
+/*68*/	__u8	s_uuid[16];		/* 128-bit uuid for volume */
+/*78*/	char	s_volume_name[16];	/* volume name */
+/*88*/	char	s_last_mounted[64];	/* directory where last mounted */
+/*C8*/	__le32	s_algorithm_usage_bitmap; /* For compression */
+	/*
+	 * Performance hints.  Directory preallocation should only
+	 * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on.
+	 */
+	__u8	s_prealloc_blocks;	/* Nr of blocks to try to preallocate*/
+	__u8	s_prealloc_dir_blocks;	/* Nr to preallocate for dirs */
+	__u16	s_reserved_gdt_blocks;	/* Per group desc for online growth */
+	/*
+	 * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set.
+	 */
+/*D0*/	__u8	s_journal_uuid[16];	/* uuid of journal superblock */
+/*E0*/	__le32	s_journal_inum;		/* inode number of journal file */
+	__le32	s_journal_dev;		/* device number of journal file */
+	__le32	s_last_orphan;		/* start of list of inodes to delete */
+	__le32	s_hash_seed[4];		/* HTREE hash seed */
+	__u8	s_def_hash_version;	/* Default hash version to use */
+	__u8	s_reserved_char_pad;
+	__u16	s_reserved_word_pad;
+	__le32	s_default_mount_opts;
+	__le32	s_first_meta_bg; 	/* First metablock block group */
+	__u32	s_reserved[190];	/* Padding to the end of the block */
+};
+
+#ifdef __KERNEL__
+static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+static inline struct ext3_inode_info *EXT3_I(struct inode *inode)
+{
+	return container_of(inode, struct ext3_inode_info, vfs_inode);
+}
+#else
+/* Assume that user mode programs are passing in an ext3fs superblock, not
+ * a kernel struct super_block.  This will allow us to call the feature-test
+ * macros from user land. */
+#define EXT3_SB(sb)	(sb)
+#endif
+
+#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime
+
+/*
+ * Codes for operating systems
+ */
+#define EXT3_OS_LINUX		0
+#define EXT3_OS_HURD		1
+#define EXT3_OS_MASIX		2
+#define EXT3_OS_FREEBSD		3
+#define EXT3_OS_LITES		4
+
+/*
+ * Revision levels
+ */
+#define EXT3_GOOD_OLD_REV	0	/* The good old (original) format */
+#define EXT3_DYNAMIC_REV	1	/* V2 format w/ dynamic inode sizes */
+
+#define EXT3_CURRENT_REV	EXT3_GOOD_OLD_REV
+#define EXT3_MAX_SUPP_REV	EXT3_DYNAMIC_REV
+
+#define EXT3_GOOD_OLD_INODE_SIZE 128
+
+/*
+ * Feature set definitions
+ */
+
+#define EXT3_HAS_COMPAT_FEATURE(sb,mask)			\
+	( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) )
+#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask)			\
+	( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) )
+#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask)			\
+	( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) )
+#define EXT3_SET_COMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask)
+#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask)
+#define EXT3_SET_INCOMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask)
+#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask)
+#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask)
+#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
+	EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask)
+
+#define EXT3_FEATURE_COMPAT_DIR_PREALLOC	0x0001
+#define EXT3_FEATURE_COMPAT_IMAGIC_INODES	0x0002
+#define EXT3_FEATURE_COMPAT_HAS_JOURNAL		0x0004
+#define EXT3_FEATURE_COMPAT_EXT_ATTR		0x0008
+#define EXT3_FEATURE_COMPAT_RESIZE_INODE	0x0010
+#define EXT3_FEATURE_COMPAT_DIR_INDEX		0x0020
+
+#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER	0x0001
+#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE	0x0002
+#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR	0x0004
+
+#define EXT3_FEATURE_INCOMPAT_COMPRESSION	0x0001
+#define EXT3_FEATURE_INCOMPAT_FILETYPE		0x0002
+#define EXT3_FEATURE_INCOMPAT_RECOVER		0x0004 /* Needs recovery */
+#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV	0x0008 /* Journal device */
+#define EXT3_FEATURE_INCOMPAT_META_BG		0x0010
+
+#define EXT3_FEATURE_COMPAT_SUPP	EXT2_FEATURE_COMPAT_EXT_ATTR
+#define EXT3_FEATURE_INCOMPAT_SUPP	(EXT3_FEATURE_INCOMPAT_FILETYPE| \
+					 EXT3_FEATURE_INCOMPAT_RECOVER| \
+					 EXT3_FEATURE_INCOMPAT_META_BG)
+#define EXT3_FEATURE_RO_COMPAT_SUPP	(EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \
+					 EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \
+					 EXT3_FEATURE_RO_COMPAT_BTREE_DIR)
+
+/*
+ * Default values for user and/or group using reserved blocks
+ */
+#define	EXT3_DEF_RESUID		0
+#define	EXT3_DEF_RESGID		0
+
+/*
+ * Default mount options
+ */
+#define EXT3_DEFM_DEBUG		0x0001
+#define EXT3_DEFM_BSDGROUPS	0x0002
+#define EXT3_DEFM_XATTR_USER	0x0004
+#define EXT3_DEFM_ACL		0x0008
+#define EXT3_DEFM_UID16		0x0010
+#define EXT3_DEFM_JMODE		0x0060
+#define EXT3_DEFM_JMODE_DATA	0x0020
+#define EXT3_DEFM_JMODE_ORDERED	0x0040
+#define EXT3_DEFM_JMODE_WBACK	0x0060
+
+/*
+ * Structure of a directory entry
+ */
+#define EXT3_NAME_LEN 255
+
+struct ext3_dir_entry {
+	__le32	inode;			/* Inode number */
+	__le16	rec_len;		/* Directory entry length */
+	__le16	name_len;		/* Name length */
+	char	name[EXT3_NAME_LEN];	/* File name */
+};
+
+/*
+ * The new version of the directory entry.  Since EXT3 structures are
+ * stored in intel byte order, and the name_len field could never be
+ * bigger than 255 chars, it's safe to reclaim the extra byte for the
+ * file_type field.
+ */
+struct ext3_dir_entry_2 {
+	__le32	inode;			/* Inode number */
+	__le16	rec_len;		/* Directory entry length */
+	__u8	name_len;		/* Name length */
+	__u8	file_type;
+	char	name[EXT3_NAME_LEN];	/* File name */
+};
+
+/*
+ * Ext3 directory file types.  Only the low 3 bits are used.  The
+ * other bits are reserved for now.
+ */
+#define EXT3_FT_UNKNOWN		0
+#define EXT3_FT_REG_FILE	1
+#define EXT3_FT_DIR		2
+#define EXT3_FT_CHRDEV		3
+#define EXT3_FT_BLKDEV		4
+#define EXT3_FT_FIFO		5
+#define EXT3_FT_SOCK		6
+#define EXT3_FT_SYMLINK		7
+
+#define EXT3_FT_MAX		8
+
+/*
+ * EXT3_DIR_PAD defines the directory entries boundaries
+ *
+ * NOTE: It must be a multiple of 4
+ */
+#define EXT3_DIR_PAD			4
+#define EXT3_DIR_ROUND			(EXT3_DIR_PAD - 1)
+#define EXT3_DIR_REC_LEN(name_len)	(((name_len) + 8 + EXT3_DIR_ROUND) & \
+					 ~EXT3_DIR_ROUND)
+/*
+ * Hash Tree Directory indexing
+ * (c) Daniel Phillips, 2001
+ */
+
+#ifdef CONFIG_EXT3_INDEX
+  #define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \
+					      EXT3_FEATURE_COMPAT_DIR_INDEX) && \
+		      (EXT3_I(dir)->i_flags & EXT3_INDEX_FL))
+#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX)
+#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1)
+#else
+  #define is_dx(dir) 0
+#define EXT3_DIR_LINK_MAX(dir) ((dir)->i_nlink >= EXT3_LINK_MAX)
+#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2)
+#endif
+
+/* Legal values for the dx_root hash_version field: */
+
+#define DX_HASH_LEGACY		0
+#define DX_HASH_HALF_MD4	1
+#define DX_HASH_TEA		2
+
+/* hash info structure used by the directory hash */
+struct dx_hash_info
+{
+	u32		hash;
+	u32		minor_hash;
+	int		hash_version;
+	u32		*seed;
+};
+
+#define EXT3_HTREE_EOF	0x7fffffff
+
+#ifdef __KERNEL__
+/*
+ * Control parameters used by ext3_htree_next_block
+ */
+#define HASH_NB_ALWAYS		1
+
+
+/*
+ * Describe an inode's exact location on disk and in memory
+ */
+struct ext3_iloc
+{
+	struct buffer_head *bh;
+	unsigned long offset;
+	unsigned long block_group;
+};
+
+static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc)
+{
+	return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset);
+}
+
+/*
+ * This structure is stuffed into the struct file's private_data field
+ * for directories.  It is where we put information so that we can do
+ * readdir operations in hash tree order.
+ */
+struct dir_private_info {
+	struct rb_root	root;
+	struct rb_node	*curr_node;
+	struct fname	*extra_fname;
+	loff_t		last_pos;
+	__u32		curr_hash;
+	__u32		curr_minor_hash;
+	__u32		next_hash;
+};
+
+/*
+ * Special error return code only used by dx_probe() and its callers.
+ */
+#define ERR_BAD_DX_DIR	-75000
+
+/*
+ * Function prototypes
+ */
+
+/*
+ * Ok, these declarations are also in <linux/kernel.h> but none of the
+ * ext3 source programs needs to include it so they are duplicated here.
+ */
+# define NORET_TYPE    /**/
+# define ATTRIB_NORET  __attribute__((noreturn))
+# define NORET_AND     noreturn,
+
+/* balloc.c */
+extern int ext3_bg_has_super(struct super_block *sb, int group);
+extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group);
+extern int ext3_new_block (handle_t *, struct inode *, unsigned long, int *);
+extern void ext3_free_blocks (handle_t *, struct inode *, unsigned long,
+			      unsigned long);
+extern void ext3_free_blocks_sb (handle_t *, struct super_block *,
+				 unsigned long, unsigned long, int *);
+extern unsigned long ext3_count_free_blocks (struct super_block *);
+extern void ext3_check_blocks_bitmap (struct super_block *);
+extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb,
+						    unsigned int block_group,
+						    struct buffer_head ** bh);
+extern int ext3_should_retry_alloc(struct super_block *sb, int *retries);
+extern void ext3_init_block_alloc_info(struct inode *);
+extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv);
+
+/* dir.c */
+extern int ext3_check_dir_entry(const char *, struct inode *,
+				struct ext3_dir_entry_2 *,
+				struct buffer_head *, unsigned long);
+extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash,
+				    __u32 minor_hash,
+				    struct ext3_dir_entry_2 *dirent);
+extern void ext3_htree_free_dir_info(struct dir_private_info *p);
+
+/* fsync.c */
+extern int ext3_sync_file (struct file *, struct dentry *, int);
+
+/* hash.c */
+extern int ext3fs_dirhash(const char *name, int len, struct
+			  dx_hash_info *hinfo);
+
+/* ialloc.c */
+extern struct inode * ext3_new_inode (handle_t *, struct inode *, int);
+extern void ext3_free_inode (handle_t *, struct inode *);
+extern struct inode * ext3_orphan_get (struct super_block *, unsigned long);
+extern unsigned long ext3_count_free_inodes (struct super_block *);
+extern unsigned long ext3_count_dirs (struct super_block *);
+extern void ext3_check_inodes_bitmap (struct super_block *);
+extern unsigned long ext3_count_free (struct buffer_head *, unsigned);
+
+
+/* inode.c */
+extern int ext3_forget(handle_t *, int, struct inode *, struct buffer_head *, int);
+extern struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *);
+extern struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
+
+extern void ext3_read_inode (struct inode *);
+extern int  ext3_write_inode (struct inode *, int);
+extern int  ext3_setattr (struct dentry *, struct iattr *);
+extern void ext3_delete_inode (struct inode *);
+extern int  ext3_sync_inode (handle_t *, struct inode *);
+extern void ext3_discard_reservation (struct inode *);
+extern void ext3_dirty_inode(struct inode *);
+extern int ext3_change_inode_journal_flag(struct inode *, int);
+extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *);
+extern void ext3_truncate (struct inode *);
+extern void ext3_set_inode_flags(struct inode *);
+extern void ext3_set_aops(struct inode *inode);
+
+/* ioctl.c */
+extern int ext3_ioctl (struct inode *, struct file *, unsigned int,
+		       unsigned long);
+
+/* namei.c */
+extern int ext3_orphan_add(handle_t *, struct inode *);
+extern int ext3_orphan_del(handle_t *, struct inode *);
+extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash,
+				__u32 start_minor_hash, __u32 *next_hash);
+
+/* resize.c */
+extern int ext3_group_add(struct super_block *sb,
+				struct ext3_new_group_data *input);
+extern int ext3_group_extend(struct super_block *sb,
+				struct ext3_super_block *es,
+				unsigned long n_blocks_count);
+
+/* super.c */
+extern void ext3_error (struct super_block *, const char *, const char *, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern void __ext3_std_error (struct super_block *, const char *, int);
+extern void ext3_abort (struct super_block *, const char *, const char *, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern void ext3_warning (struct super_block *, const char *, const char *, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern void ext3_update_dynamic_rev (struct super_block *sb);
+
+#define ext3_std_error(sb, errno)				\
+do {								\
+	if ((errno))						\
+		__ext3_std_error((sb), __FUNCTION__, (errno));	\
+} while (0)
+
+/*
+ * Inodes and files operations
+ */
+
+/* dir.c */
+extern struct file_operations ext3_dir_operations;
+
+/* file.c */
+extern struct inode_operations ext3_file_inode_operations;
+extern struct file_operations ext3_file_operations;
+
+/* namei.c */
+extern struct inode_operations ext3_dir_inode_operations;
+extern struct inode_operations ext3_special_inode_operations;
+
+/* symlink.c */
+extern struct inode_operations ext3_symlink_inode_operations;
+extern struct inode_operations ext3_fast_symlink_inode_operations;
+
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_EXT3_FS_H */
diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h
new file mode 100644
index 000000000000..2914f7b07156
--- /dev/null
+++ b/include/linux/ext3_fs_i.h
@@ -0,0 +1,138 @@
+/*
+ *  linux/include/linux/ext3_fs_i.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs_i.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT3_FS_I
+#define _LINUX_EXT3_FS_I
+
+#include <linux/rwsem.h>
+#include <linux/rbtree.h>
+#include <linux/seqlock.h>
+
+struct ext3_reserve_window {
+	__u32			_rsv_start;	/* First byte reserved */
+	__u32			_rsv_end;	/* Last byte reserved or 0 */
+};
+
+struct ext3_reserve_window_node {
+	struct rb_node	 	rsv_node;
+	__u32			rsv_goal_size;
+	__u32			rsv_alloc_hit;
+	struct ext3_reserve_window	rsv_window;
+};
+
+struct ext3_block_alloc_info {
+	/* information about reservation window */
+	struct ext3_reserve_window_node	rsv_window_node;
+	/*
+	 * was i_next_alloc_block in ext3_inode_info
+	 * is the logical (file-relative) number of the
+	 * most-recently-allocated block in this file.
+	 * We use this for detecting linearly ascending allocation requests.
+	 */
+	__u32                   last_alloc_logical_block;
+	/*
+	 * Was i_next_alloc_goal in ext3_inode_info
+	 * is the *physical* companion to i_next_alloc_block.
+	 * it the the physical block number of the block which was most-recentl
+	 * allocated to this file.  This give us the goal (target) for the next
+	 * allocation when we detect linearly ascending requests.
+	 */
+	__u32                   last_alloc_physical_block;
+};
+
+#define rsv_start rsv_window._rsv_start
+#define rsv_end rsv_window._rsv_end
+
+/*
+ * third extended file system inode data in memory
+ */
+struct ext3_inode_info {
+	__le32	i_data[15];	/* unconverted */
+	__u32	i_flags;
+#ifdef EXT3_FRAGMENTS
+	__u32	i_faddr;
+	__u8	i_frag_no;
+	__u8	i_frag_size;
+#endif
+	__u32	i_file_acl;
+	__u32	i_dir_acl;
+	__u32	i_dtime;
+
+	/*
+	 * i_block_group is the number of the block group which contains
+	 * this file's inode.  Constant across the lifetime of the inode,
+	 * it is ued for making block allocation decisions - we try to
+	 * place a file's data blocks near its inode block, and new inodes
+	 * near to their parent directory's inode.
+	 */
+	__u32	i_block_group;
+	__u32	i_state;		/* Dynamic state flags for ext3 */
+
+	/* block reservation info */
+	struct ext3_block_alloc_info *i_block_alloc_info;
+
+	__u32	i_dir_start_lookup;
+#ifdef CONFIG_EXT3_FS_XATTR
+	/*
+	 * Extended attributes can be read independently of the main file
+	 * data. Taking i_sem even when reading would cause contention
+	 * between readers of EAs and writers of regular file data, so
+	 * instead we synchronize on xattr_sem when reading or changing
+	 * EAs.
+	 */
+	struct rw_semaphore xattr_sem;
+#endif
+#ifdef CONFIG_EXT3_FS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
+	struct list_head i_orphan;	/* unlinked but open inodes */
+
+	/*
+	 * i_disksize keeps track of what the inode size is ON DISK, not
+	 * in memory.  During truncate, i_size is set to the new size by
+	 * the VFS prior to calling ext3_truncate(), but the filesystem won't
+	 * set i_disksize to 0 until the truncate is actually under way.
+	 *
+	 * The intent is that i_disksize always represents the blocks which
+	 * are used by this file.  This allows recovery to restart truncate
+	 * on orphans if we crash during truncate.  We actually write i_disksize
+	 * into the on-disk inode when writing inodes out, instead of i_size.
+	 *
+	 * The only time when i_disksize and i_size may be different is when
+	 * a truncate is in progress.  The only things which change i_disksize
+	 * are ext3_get_block (growth) and ext3_truncate (shrinkth).
+	 */
+	loff_t	i_disksize;
+
+	/* on-disk additional length */
+	__u16 i_extra_isize;
+
+	/*
+	 * truncate_sem is for serialising ext3_truncate() against
+	 * ext3_getblock().  In the 2.4 ext2 design, great chunks of inode's
+	 * data tree are chopped off during truncate. We can't do that in
+	 * ext3 because whenever we perform intermediate commits during
+	 * truncate, the inode and all the metadata blocks *must* be in a
+	 * consistent state which allows truncation of the orphans to restart
+	 * during recovery.  Hence we must fix the get_block-vs-truncate race
+	 * by other means, so we have truncate_sem.
+	 */
+	struct semaphore truncate_sem;
+	struct inode vfs_inode;
+};
+
+#endif	/* _LINUX_EXT3_FS_I */
diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h
new file mode 100644
index 000000000000..f61309c81cc4
--- /dev/null
+++ b/include/linux/ext3_fs_sb.h
@@ -0,0 +1,83 @@
+/*
+ *  linux/include/linux/ext3_fs_sb.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs_sb.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT3_FS_SB
+#define _LINUX_EXT3_FS_SB
+
+#ifdef __KERNEL__
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/blockgroup_lock.h>
+#include <linux/percpu_counter.h>
+#endif
+#include <linux/rbtree.h>
+
+/*
+ * third extended-fs super-block data in memory
+ */
+struct ext3_sb_info {
+	unsigned long s_frag_size;	/* Size of a fragment in bytes */
+	unsigned long s_frags_per_block;/* Number of fragments per block */
+	unsigned long s_inodes_per_block;/* Number of inodes per block */
+	unsigned long s_frags_per_group;/* Number of fragments in a group */
+	unsigned long s_blocks_per_group;/* Number of blocks in a group */
+	unsigned long s_inodes_per_group;/* Number of inodes in a group */
+	unsigned long s_itb_per_group;	/* Number of inode table blocks per group */
+	unsigned long s_gdb_count;	/* Number of group descriptor blocks */
+	unsigned long s_desc_per_block;	/* Number of group descriptors per block */
+	unsigned long s_groups_count;	/* Number of groups in the fs */
+	struct buffer_head * s_sbh;	/* Buffer containing the super block */
+	struct ext3_super_block * s_es;	/* Pointer to the super block in the buffer */
+	struct buffer_head ** s_group_desc;
+	unsigned long  s_mount_opt;
+	uid_t s_resuid;
+	gid_t s_resgid;
+	unsigned short s_mount_state;
+	unsigned short s_pad;
+	int s_addr_per_block_bits;
+	int s_desc_per_block_bits;
+	int s_inode_size;
+	int s_first_ino;
+	spinlock_t s_next_gen_lock;
+	u32 s_next_generation;
+	u32 s_hash_seed[4];
+	int s_def_hash_version;
+	struct percpu_counter s_freeblocks_counter;
+	struct percpu_counter s_freeinodes_counter;
+	struct percpu_counter s_dirs_counter;
+	struct blockgroup_lock s_blockgroup_lock;
+
+	/* root of the per fs reservation window tree */
+	spinlock_t s_rsv_window_lock;
+	struct rb_root s_rsv_window_root;
+	struct ext3_reserve_window_node s_rsv_window_head;
+
+	/* Journaling */
+	struct inode * s_journal_inode;
+	struct journal_s * s_journal;
+	struct list_head s_orphan;
+	unsigned long s_commit_interval;
+	struct block_device *journal_bdev;
+#ifdef CONFIG_JBD_DEBUG
+	struct timer_list turn_ro_timer;	/* For turning read-only (crash simulation) */
+	wait_queue_head_t ro_wait_queue;	/* For people waiting for the fs to go read-only */
+#endif
+#ifdef CONFIG_QUOTA
+	char *s_qf_names[MAXQUOTAS];		/* Names of quota files with journalled quota */
+	int s_jquota_fmt;			/* Format of quota to use */
+#endif
+};
+
+#endif	/* _LINUX_EXT3_FS_SB */
diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h
new file mode 100644
index 000000000000..e8292af9033b
--- /dev/null
+++ b/include/linux/ext3_jbd.h
@@ -0,0 +1,265 @@
+/*
+ * linux/include/linux/ext3_jbd.h
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
+ *
+ * Copyright 1998--1999 Red Hat corp --- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * Ext3-specific journaling extensions.
+ */
+
+#ifndef _LINUX_EXT3_JBD_H
+#define _LINUX_EXT3_JBD_H
+
+#include <linux/fs.h>
+#include <linux/jbd.h>
+#include <linux/ext3_fs.h>
+
+#define EXT3_JOURNAL(inode)	(EXT3_SB((inode)->i_sb)->s_journal)
+
+/* Define the number of blocks we need to account to a transaction to
+ * modify one block of data.
+ * 
+ * We may have to touch one inode, one bitmap buffer, up to three
+ * indirection blocks, the group and superblock summaries, and the data
+ * block to complete the transaction.  */
+
+#define EXT3_SINGLEDATA_TRANS_BLOCKS	8U
+
+/* Extended attribute operations touch at most two data buffers,
+ * two bitmap buffers, and two group summaries, in addition to the inode
+ * and the superblock, which are already accounted for. */
+
+#define EXT3_XATTR_TRANS_BLOCKS		6U
+
+/* Define the minimum size for a transaction which modifies data.  This
+ * needs to take into account the fact that we may end up modifying two
+ * quota files too (one for the group, one for the user quota).  The
+ * superblock only gets updated once, of course, so don't bother
+ * counting that again for the quota updates. */
+
+#define EXT3_DATA_TRANS_BLOCKS		(EXT3_SINGLEDATA_TRANS_BLOCKS + \
+					 EXT3_XATTR_TRANS_BLOCKS - 2 + \
+					 2*EXT3_QUOTA_TRANS_BLOCKS)
+
+/* Delete operations potentially hit one directory's namespace plus an
+ * entire inode, plus arbitrary amounts of bitmap/indirection data.  Be
+ * generous.  We can grow the delete transaction later if necessary. */
+
+#define EXT3_DELETE_TRANS_BLOCKS	(2 * EXT3_DATA_TRANS_BLOCKS + 64)
+
+/* Define an arbitrary limit for the amount of data we will anticipate
+ * writing to any given transaction.  For unbounded transactions such as
+ * write(2) and truncate(2) we can write more than this, but we always
+ * start off at the maximum transaction size and grow the transaction
+ * optimistically as we go. */
+
+#define EXT3_MAX_TRANS_DATA		64U
+
+/* We break up a large truncate or write transaction once the handle's
+ * buffer credits gets this low, we need either to extend the
+ * transaction or to start a new one.  Reserve enough space here for
+ * inode, bitmap, superblock, group and indirection updates for at least
+ * one block, plus two quota updates.  Quota allocations are not
+ * needed. */
+
+#define EXT3_RESERVE_TRANS_BLOCKS	12U
+
+#define EXT3_INDEX_EXTRA_TRANS_BLOCKS	8
+
+#ifdef CONFIG_QUOTA
+/* Amount of blocks needed for quota update - we know that the structure was
+ * allocated so we need to update only inode+data */
+#define EXT3_QUOTA_TRANS_BLOCKS 2
+/* Amount of blocks needed for quota insert/delete - we do some block writes
+ * but inode, sb and group updates are done only once */
+#define EXT3_QUOTA_INIT_BLOCKS (DQUOT_MAX_WRITES*\
+				(EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3)
+#else
+#define EXT3_QUOTA_TRANS_BLOCKS 0
+#define EXT3_QUOTA_INIT_BLOCKS 0
+#endif
+
+int
+ext3_mark_iloc_dirty(handle_t *handle, 
+		     struct inode *inode,
+		     struct ext3_iloc *iloc);
+
+/* 
+ * On success, We end up with an outstanding reference count against
+ * iloc->bh.  This _must_ be cleaned up later. 
+ */
+
+int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, 
+			struct ext3_iloc *iloc);
+
+int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode);
+
+/*
+ * Wrapper functions with which ext3 calls into JBD.  The intent here is
+ * to allow these to be turned into appropriate stubs so ext3 can control
+ * ext2 filesystems, so ext2+ext3 systems only nee one fs.  This work hasn't
+ * been done yet.
+ */
+
+void ext3_journal_abort_handle(const char *caller, const char *err_fn,
+		struct buffer_head *bh, handle_t *handle, int err);
+
+static inline int
+__ext3_journal_get_undo_access(const char *where, handle_t *handle,
+				struct buffer_head *bh)
+{
+	int err = journal_get_undo_access(handle, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+static inline int
+__ext3_journal_get_write_access(const char *where, handle_t *handle,
+				struct buffer_head *bh)
+{
+	int err = journal_get_write_access(handle, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+static inline void
+ext3_journal_release_buffer(handle_t *handle, struct buffer_head *bh)
+{
+	journal_release_buffer(handle, bh);
+}
+
+static inline int
+__ext3_journal_forget(const char *where, handle_t *handle, struct buffer_head *bh)
+{
+	int err = journal_forget(handle, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+static inline int
+__ext3_journal_revoke(const char *where, handle_t *handle,
+		      unsigned long blocknr, struct buffer_head *bh)
+{
+	int err = journal_revoke(handle, blocknr, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+static inline int
+__ext3_journal_get_create_access(const char *where,
+				 handle_t *handle, struct buffer_head *bh)
+{
+	int err = journal_get_create_access(handle, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+static inline int
+__ext3_journal_dirty_metadata(const char *where,
+			      handle_t *handle, struct buffer_head *bh)
+{
+	int err = journal_dirty_metadata(handle, bh);
+	if (err)
+		ext3_journal_abort_handle(where, __FUNCTION__, bh, handle,err);
+	return err;
+}
+
+
+#define ext3_journal_get_undo_access(handle, bh) \
+	__ext3_journal_get_undo_access(__FUNCTION__, (handle), (bh))
+#define ext3_journal_get_write_access(handle, bh) \
+	__ext3_journal_get_write_access(__FUNCTION__, (handle), (bh))
+#define ext3_journal_revoke(handle, blocknr, bh) \
+	__ext3_journal_revoke(__FUNCTION__, (handle), (blocknr), (bh))
+#define ext3_journal_get_create_access(handle, bh) \
+	__ext3_journal_get_create_access(__FUNCTION__, (handle), (bh))
+#define ext3_journal_dirty_metadata(handle, bh) \
+	__ext3_journal_dirty_metadata(__FUNCTION__, (handle), (bh))
+#define ext3_journal_forget(handle, bh) \
+	__ext3_journal_forget(__FUNCTION__, (handle), (bh))
+
+int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh);
+
+handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks);
+int __ext3_journal_stop(const char *where, handle_t *handle);
+
+static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks)
+{
+	return ext3_journal_start_sb(inode->i_sb, nblocks);
+}
+
+#define ext3_journal_stop(handle) \
+	__ext3_journal_stop(__FUNCTION__, (handle))
+
+static inline handle_t *ext3_journal_current_handle(void)
+{
+	return journal_current_handle();
+}
+
+static inline int ext3_journal_extend(handle_t *handle, int nblocks)
+{
+	return journal_extend(handle, nblocks);
+}
+
+static inline int ext3_journal_restart(handle_t *handle, int nblocks)
+{
+	return journal_restart(handle, nblocks);
+}
+
+static inline int ext3_journal_blocks_per_page(struct inode *inode)
+{
+	return journal_blocks_per_page(inode);
+}
+
+static inline int ext3_journal_force_commit(journal_t *journal)
+{
+	return journal_force_commit(journal);
+}
+
+/* super.c */
+int ext3_force_commit(struct super_block *sb);
+
+static inline int ext3_should_journal_data(struct inode *inode)
+{
+	if (!S_ISREG(inode->i_mode))
+		return 1;
+	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
+		return 1;
+	if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL)
+		return 1;
+	return 0;
+}
+
+static inline int ext3_should_order_data(struct inode *inode)
+{
+	if (!S_ISREG(inode->i_mode))
+		return 0;
+	if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL)
+		return 0;
+	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
+		return 1;
+	return 0;
+}
+
+static inline int ext3_should_writeback_data(struct inode *inode)
+{
+	if (!S_ISREG(inode->i_mode))
+		return 0;
+	if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL)
+		return 0;
+	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
+		return 1;
+	return 0;
+}
+
+#endif	/* _LINUX_EXT3_JBD_H */
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
new file mode 100644
index 000000000000..6fc656dfb93d
--- /dev/null
+++ b/include/linux/fadvise.h
@@ -0,0 +1,11 @@
+#ifndef FADVISE_H_INCLUDED
+#define FADVISE_H_INCLUDED
+
+#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
+#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
+#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
+#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
+#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
+
+#endif	/* FADVISE_H_INCLUDED */
diff --git a/include/linux/fb.h b/include/linux/fb.h
new file mode 100644
index 000000000000..b45d3e2d711a
--- /dev/null
+++ b/include/linux/fb.h
@@ -0,0 +1,932 @@
+#ifndef _LINUX_FB_H
+#define _LINUX_FB_H
+
+#include <asm/types.h>
+
+/* Definitions of frame buffers						*/
+
+#define FB_MAJOR		29
+#define FB_MAX			32	/* sufficient for now */
+
+/* ioctls
+   0x46 is 'F'								*/
+#define FBIOGET_VSCREENINFO	0x4600
+#define FBIOPUT_VSCREENINFO	0x4601
+#define FBIOGET_FSCREENINFO	0x4602
+#define FBIOGETCMAP		0x4604
+#define FBIOPUTCMAP		0x4605
+#define FBIOPAN_DISPLAY		0x4606
+#ifdef __KERNEL__
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
+#else
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC	0x460C */
+/* #define FBIOPUT_MONITORSPEC	0x460D */
+/* #define FBIOSWITCH_MONIBIT	0x460E */
+#define FBIOGET_CON2FBMAP	0x460F
+#define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC              0x4613
+#define FBIO_FREE               0x4614
+#define FBIOGET_GLYPH           0x4615
+#define FBIOGET_HWCINFO         0x4616
+#define FBIOPUT_MODEINFO        0x4617
+#define FBIOGET_DISPINFO        0x4618
+
+
+#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+#define FB_TYPE_PLANES			1	/* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
+#define FB_TYPE_TEXT			3	/* Text/attributes	*/
+#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
+
+#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
+#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
+
+#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
+#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
+
+#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
+#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
+#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
+#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
+#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
+#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
+#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
+#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
+#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
+#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
+#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
+#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
+#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
+#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
+#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
+#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
+#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
+#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
+#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
+#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
+#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
+#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
+#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
+#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
+#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
+#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
+#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
+#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
+#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
+#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
+#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
+#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
+#define FB_ACCEL_I810           39      /* Intel 810/815                */
+#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
+#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
+#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
+#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
+#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
+#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
+#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
+#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
+#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
+#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
+#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
+#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+
+#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
+#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
+#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
+#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
+#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
+#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
+#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
+#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
+#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
+#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
+#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
+#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/ 
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 reserved[3];		/* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified. This implies
+ * big-endian byte order if bits_per_pixel is greater than 8.
+ */
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */ 
+					/* right */ 
+};
+
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+
+#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
+#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
+#define FB_ACTIVATE_MASK       15
+					/* values			*/
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
+#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
+#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+
+#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_EXT		4	/* external sync		*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+					/* vtotal = 144d/288n/576i => PAL  */
+					/* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN	32	/* sync on green */
+
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_INTERLACED	1	/* interlaced	*/
+#define FB_VMODE_DOUBLE		2	/* double scan */
+#define FB_VMODE_MASK		255
+
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* != 0 Graylevels instead of colors */
+
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/	
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 reserved[5];		/* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 *red;			/* Red values	*/
+	__u16 *green;
+	__u16 *blue;
+	__u16 *transp;			/* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+	__u32 console;
+	__u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+
+enum {
+	/* screen: unblanked, hsync: on,  vsync: on */
+	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
+
+	/* screen: blanked,   hsync: on,  vsync: on */
+	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
+
+	/* screen: blanked,   hsync: on,  vsync: off */
+	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: on */
+	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: off */
+	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
+#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+
+struct fb_vblank {
+	__u32 flags;			/* FB_VBLANK flags */
+	__u32 count;			/* counter of retraces since boot */
+	__u32 vcount;			/* current scanline position */
+	__u32 hcount;			/* current scandot position */
+	__u32 reserved[4];		/* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR  1
+
+struct fb_copyarea {
+	__u32 dx;
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 sx;
+	__u32 sy;
+};
+
+struct fb_fillrect {
+	__u32 dx;	/* screen-relative */
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 color;
+	__u32 rop;
+};
+
+struct fb_image {
+	__u32 dx;		/* Where to place image */
+	__u32 dy;
+	__u32 width;		/* Size of image */
+	__u32 height;
+	__u32 fg_color;		/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;		/* Depth of the image */
+	const char *data;	/* Pointer to image data */
+	struct fb_cmap cmap;	/* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS   0x02
+#define FB_CUR_SETHOT   0x04
+#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE	0x20
+#define FB_CUR_SETALL   0xFF
+
+struct fbcurpos {
+	__u16 x, y;
+};
+
+struct fb_cursor {
+	__u16 set;		/* what to set */
+	__u16 enable;		/* cursor on/off */
+	__u16 rop;		/* bitop operation */
+	const char *mask;	/* cursor mask bits */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fb_image	image;	/* Cursor image */
+};
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/notifier.h>
+#include <linux/list.h>
+#include <asm/io.h>
+
+struct vm_area_struct;
+struct fb_info;
+struct device;
+struct file;
+
+/* Definitions below are used in the parsed monitor specs */
+#define FB_DPMS_ACTIVE_OFF	1
+#define FB_DPMS_SUSPEND		2
+#define FB_DPMS_STANDBY		4
+
+#define FB_DISP_DDI		1
+#define FB_DISP_ANA_700_300	2
+#define FB_DISP_ANA_714_286	4
+#define FB_DISP_ANA_1000_400	8
+#define FB_DISP_ANA_700_000	16
+
+#define FB_DISP_MONO		32
+#define FB_DISP_RGB		64
+#define FB_DISP_MULTI		128
+#define FB_DISP_UNKNOWN		256
+
+#define FB_SIGNAL_NONE		0
+#define FB_SIGNAL_BLANK_BLANK	1
+#define FB_SIGNAL_SEPARATE	2
+#define FB_SIGNAL_COMPOSITE	4
+#define FB_SIGNAL_SYNC_ON_GREEN	8
+#define FB_SIGNAL_SERRATION_ON	16
+
+#define FB_MISC_PRIM_COLOR	1
+#define FB_MISC_1ST_DETAIL	2	/* First Detailed Timing is preferred */
+struct fb_chroma {
+	__u32 redx;	/* in fraction of 1024 */
+	__u32 greenx;
+	__u32 bluex;
+	__u32 whitex;
+	__u32 redy;
+	__u32 greeny;
+	__u32 bluey;
+	__u32 whitey;
+};
+
+struct fb_monspecs {
+	struct fb_chroma chroma;
+	struct fb_videomode *modedb;	/* mode database */
+	__u8  manufacturer[4];		/* Manufacturer */
+	__u8  monitor[14];		/* Monitor String */
+	__u8  serial_no[14];		/* Serial Number */
+	__u8  ascii[14];		/* ? */
+	__u32 modedb_len;		/* mode database length */
+	__u32 model;			/* Monitor Model */
+	__u32 serial;			/* Serial Number - Integer */
+	__u32 year;			/* Year manufactured */
+	__u32 week;			/* Week Manufactured */
+	__u32 hfmin;			/* hfreq lower limit (Hz) */
+	__u32 hfmax;			/* hfreq upper limit (Hz) */
+	__u32 dclkmin;			/* pixelclock lower limit (Hz) */
+	__u32 dclkmax;			/* pixelclock upper limit (Hz) */
+	__u16 input;			/* display type - see FB_DISP_* */
+	__u16 dpms;			/* DPMS support - see FB_DPMS_ */
+	__u16 signal;			/* Signal Type - see FB_SIGNAL_* */
+	__u16 vfmin;			/* vfreq lower limit (Hz) */
+	__u16 vfmax;			/* vfreq upper limit (Hz) */
+	__u16 gamma;			/* Gamma - in fractions of 100 */
+	__u16 gtf	: 1;		/* supports GTF */
+	__u16 misc;			/* Misc flags - see FB_MISC_* */
+	__u8  version;			/* EDID version... */
+	__u8  revision;			/* ...and revision */
+	__u8  max_x;			/* Maximum horizontal size (cm) */
+	__u8  max_y;			/* Maximum vertical size (cm) */
+};
+
+struct fb_cmap_user {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 __user *red;		/* Red values	*/
+	__u16 __user *green;
+	__u16 __user *blue;
+	__u16 __user *transp;		/* transparency, can be NULL */
+};
+
+struct fb_image_user {
+	__u32 dx;			/* Where to place image */
+	__u32 dy;
+	__u32 width;			/* Size of image */
+	__u32 height;
+	__u32 fg_color;			/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;			/* Depth of the image */
+	const char __user *data;	/* Pointer to image data */
+	struct fb_cmap_user cmap;	/* color map info */
+};
+
+struct fb_cursor_user {
+	__u16 set;			/* what to set */
+	__u16 enable;			/* cursor on/off */
+	__u16 rop;			/* bitop operation */
+	const char __user *mask;	/* cursor mask bits */
+	struct fbcurpos hot;		/* cursor hot spot */
+	struct fb_image_user image;	/* Cursor image */
+};
+
+/*
+ * Register/unregister for framebuffer events
+ */
+
+/*	The resolution of the passed in fb_info about to change */ 
+#define FB_EVENT_MODE_CHANGE		0x01
+/*	The display on this fb_info is beeing suspended, no access to the
+ *	framebuffer is allowed any more after that call returns
+ */
+#define FB_EVENT_SUSPEND		0x02
+/*	The display on this fb_info was resumed, you can restore the display
+ *	if you own it
+ */
+#define FB_EVENT_RESUME			0x03
+/*      An entry from the modelist was removed */
+#define FB_EVENT_MODE_DELETE            0x04
+/*      A driver registered itself */
+#define FB_EVENT_FB_REGISTERED          0x05
+/*      get console to framebuffer mapping */
+#define FB_EVENT_GET_CONSOLE_MAP        0x06
+/*      set console to framebuffer mapping */
+#define FB_EVENT_SET_CONSOLE_MAP        0x07
+/*      A display blank is requested       */
+#define FB_EVENT_BLANK                  0x08
+/*      Private modelist is to be replaced */
+#define FB_EVENT_NEW_MODELIST           0x09
+
+struct fb_event {
+	struct fb_info *info;
+	void *data;
+};
+
+
+extern int fb_register_client(struct notifier_block *nb);
+extern int fb_unregister_client(struct notifier_block *nb);
+
+/*
+ * Pixmap structure definition
+ *
+ * The purpose of this structure is to translate data
+ * from the hardware independent format of fbdev to what
+ * format the hardware needs.
+ */
+
+#define FB_PIXMAP_DEFAULT 1     /* used internally by fbcon */
+#define FB_PIXMAP_SYSTEM  2     /* memory is in system RAM  */
+#define FB_PIXMAP_IO      4     /* memory is iomapped       */
+#define FB_PIXMAP_SYNC    256   /* set if GPU can DMA       */
+
+struct fb_pixmap {
+	u8  *addr;		/* pointer to memory			*/
+	u32 size;		/* size of buffer in bytes		*/
+	u32 offset;		/* current offset to buffer		*/
+	u32 buf_align;		/* byte alignment of each bitmap	*/
+	u32 scan_align;		/* alignment per scanline		*/
+	u32 access_align;	/* alignment per read/write		*/
+	u32 flags;		/* see FB_PIXMAP_*			*/
+	/* access methods */
+	void (*outbuf)(struct fb_info *info, u8 *addr, u8 *src, unsigned int size);
+	u8   (*inbuf) (struct fb_info *info, u8 *addr);
+};
+
+
+/*
+ * Frame buffer operations
+ *
+ * LOCKING NOTE: those functions must _ALL_ be called with the console
+ * semaphore held, this is the only suitable locking mecanism we have
+ * in 2.6. Some may be called at interrupt time at this point though.
+ */
+
+struct fb_ops {
+	/* open/release and usage marking */
+	struct module *owner;
+	int (*fb_open)(struct fb_info *info, int user);
+	int (*fb_release)(struct fb_info *info, int user);
+
+	/* For framebuffers with strange non linear layouts or that do not
+	 * work with normal memory mapped access
+	 */
+	ssize_t (*fb_read)(struct file *file, char __user *buf, size_t count, loff_t *ppos);
+	ssize_t (*fb_write)(struct file *file, const char __user *buf, size_t count, loff_t *ppos);
+
+	/* checks var and eventually tweaks it to something supported,
+	 * DO NOT MODIFY PAR */
+	int (*fb_check_var)(struct fb_var_screeninfo *var, struct fb_info *info);
+
+	/* set the video mode according to info->var */
+	int (*fb_set_par)(struct fb_info *info);
+
+	/* set color register */
+	int (*fb_setcolreg)(unsigned regno, unsigned red, unsigned green,
+			    unsigned blue, unsigned transp, struct fb_info *info);
+
+	/* blank display */
+	int (*fb_blank)(int blank, struct fb_info *info);
+
+	/* pan display */
+	int (*fb_pan_display)(struct fb_var_screeninfo *var, struct fb_info *info);
+
+	/* Draws a rectangle */
+	void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
+	/* Copy data from area to another */
+	void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
+	/* Draws a image to the display */
+	void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
+
+	/* Draws cursor */
+	int (*fb_cursor) (struct fb_info *info, struct fb_cursor *cursor);
+
+	/* Rotates the display */
+	void (*fb_rotate)(struct fb_info *info, int angle);
+
+	/* wait for blit idle, optional */
+	int (*fb_sync)(struct fb_info *info);
+
+	/* perform fb specific ioctl (optional) */
+	int (*fb_ioctl)(struct inode *inode, struct file *file, unsigned int cmd,
+			unsigned long arg, struct fb_info *info);
+
+	/* Handle 32bit compat ioctl (optional) */
+	long (*fb_compat_ioctl)(struct file *f, unsigned cmd, unsigned long arg,
+			       struct fb_info *info);
+
+	/* perform fb specific mmap */
+	int (*fb_mmap)(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
+};
+
+#ifdef CONFIG_FB_TILEBLITTING
+
+#define FB_TILE_CURSOR_NONE        0
+#define FB_TILE_CURSOR_UNDERLINE   1
+#define FB_TILE_CURSOR_LOWER_THIRD 2
+#define FB_TILE_CURSOR_LOWER_HALF  3
+#define FB_TILE_CURSOR_TWO_THIRDS  4
+#define FB_TILE_CURSOR_BLOCK       5
+
+struct fb_tilemap {
+	__u32 width;                /* width of each tile in pixels */
+	__u32 height;               /* height of each tile in scanlines */
+	__u32 depth;                /* color depth of each tile */
+	__u32 length;               /* number of tiles in the map */
+	__u8  *data;                /* actual tile map: a bitmap array, packed
+				       to the nearest byte */
+};
+
+struct fb_tilerect {
+	__u32 sx;                   /* origin in the x-axis */
+	__u32 sy;                   /* origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+	__u32 index;                /* what tile to use: index to tile map */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+	__u32 rop;                  /* raster operation */
+};
+
+struct fb_tilearea {
+	__u32 sx;                   /* source origin in the x-axis */
+	__u32 sy;                   /* source origin in the y-axis */
+	__u32 dx;                   /* destination origin in the x-axis */
+	__u32 dy;                   /* destination origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+};
+
+struct fb_tileblit {
+	__u32 sx;                   /* origin in the x-axis */
+	__u32 sy;                   /* origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+	__u32 length;               /* number of tiles to draw */
+	__u32 *indices;             /* array of indices to tile map */
+};
+
+struct fb_tilecursor {
+	__u32 sx;                   /* cursor position in the x-axis */
+	__u32 sy;                   /* cursor position in the y-axis */
+	__u32 mode;                 /* 0 = erase, 1 = draw */
+	__u32 shape;                /* see FB_TILE_CURSOR_* */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+};
+
+struct fb_tile_ops {
+	/* set tile characteristics */
+	void (*fb_settile)(struct fb_info *info, struct fb_tilemap *map);
+
+	/* all dimensions from hereon are in terms of tiles */
+
+	/* move a rectangular region of tiles from one area to another*/
+	void (*fb_tilecopy)(struct fb_info *info, struct fb_tilearea *area);
+	/* fill a rectangular region with a tile */
+	void (*fb_tilefill)(struct fb_info *info, struct fb_tilerect *rect);
+	/* copy an array of tiles */
+	void (*fb_tileblit)(struct fb_info *info, struct fb_tileblit *blit);
+	/* cursor */
+	void (*fb_tilecursor)(struct fb_info *info,
+			      struct fb_tilecursor *cursor);
+};
+#endif /* CONFIG_FB_TILEBLITTING */
+
+/* FBINFO_* = fb_info.flags bit flags */
+#define FBINFO_MODULE		0x0001	/* Low-level driver is a module */
+#define FBINFO_HWACCEL_DISABLED	0x0002
+	/* When FBINFO_HWACCEL_DISABLED is set:
+	 *  Hardware acceleration is turned off.  Software implementations
+	 *  of required functions (copyarea(), fillrect(), and imageblit())
+	 *  takes over; acceleration engine should be in a quiescent state */
+
+/* hints */
+#define FBINFO_PARTIAL_PAN_OK	0x0040 /* otw use pan only for double-buffering */
+#define FBINFO_READS_FAST	0x0080 /* soft-copy faster than rendering */
+
+/* hardware supported ops */
+/*  semantics: when a bit is set, it indicates that the operation is
+ *   accelerated by hardware.
+ *  required functions will still work even if the bit is not set.
+ *  optional functions may not even exist if the flag bit is not set.
+ */
+#define FBINFO_HWACCEL_NONE		0x0000
+#define FBINFO_HWACCEL_COPYAREA		0x0100 /* required */
+#define FBINFO_HWACCEL_FILLRECT		0x0200 /* required */
+#define FBINFO_HWACCEL_IMAGEBLIT	0x0400 /* required */
+#define FBINFO_HWACCEL_ROTATE		0x0800 /* optional */
+#define FBINFO_HWACCEL_XPAN		0x1000 /* optional */
+#define FBINFO_HWACCEL_YPAN		0x2000 /* optional */
+#define FBINFO_HWACCEL_YWRAP		0x4000 /* optional */
+
+#define FBINFO_MISC_USEREVENT          0x10000 /* event request
+						  from userspace */
+#define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
+
+struct fb_info {
+	int node;
+	int flags;
+	struct fb_var_screeninfo var;	/* Current var */
+	struct fb_fix_screeninfo fix;	/* Current fix */
+	struct fb_monspecs monspecs;	/* Current Monitor specs */
+	struct work_struct queue;	/* Framebuffer event queue */
+	struct fb_pixmap pixmap;	/* Image hardware mapper */
+	struct fb_pixmap sprite;	/* Cursor hardware mapper */
+	struct fb_cmap cmap;		/* Current cmap */
+	struct list_head modelist;      /* mode list */
+	struct fb_videomode *mode;	/* current mode */
+	struct fb_ops *fbops;
+	struct device *device;
+	struct class_device *class_device; /* sysfs per device attrs */
+#ifdef CONFIG_FB_TILEBLITTING
+	struct fb_tile_ops *tileops;    /* Tile Blitting */
+#endif
+	char __iomem *screen_base;	/* Virtual address */
+	unsigned long screen_size;	/* Amount of ioremapped VRAM or 0 */ 
+	void *pseudo_palette;		/* Fake palette of 16 colors */ 
+#define FBINFO_STATE_RUNNING	0
+#define FBINFO_STATE_SUSPENDED	1
+	u32 state;			/* Hardware state i.e suspend */
+	void *fbcon_par;                /* fbcon use-only private area */
+	/* From here on everything is device dependent */
+	void *par;	
+};
+
+#ifdef MODULE
+#define FBINFO_DEFAULT	FBINFO_MODULE
+#else
+#define FBINFO_DEFAULT	0
+#endif
+
+// This will go away
+#define FBINFO_FLAG_MODULE	FBINFO_MODULE
+#define FBINFO_FLAG_DEFAULT	FBINFO_DEFAULT
+
+/* This will go away
+ * fbset currently hacks in FB_ACCELF_TEXT into var.accel_flags
+ * when it wants to turn the acceleration engine on.  This is
+ * really a separate operation, and should be modified via sysfs.
+ *  But for now, we leave it broken with the following define
+ */
+#define STUPID_ACCELF_TEXT_SHIT
+
+// This will go away
+#if defined(__sparc__)
+
+/* We map all of our framebuffers such that big-endian accesses
+ * are what we want, so the following is sufficient.
+ */
+
+// This will go away
+#define fb_readb sbus_readb
+#define fb_readw sbus_readw
+#define fb_readl sbus_readl
+#define fb_readq sbus_readq
+#define fb_writeb sbus_writeb
+#define fb_writew sbus_writew
+#define fb_writel sbus_writel
+#define fb_writeq sbus_writeq
+#define fb_memset sbus_memset_io
+
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
+
+#define fb_readb __raw_readb
+#define fb_readw __raw_readw
+#define fb_readl __raw_readl
+#define fb_readq __raw_readq
+#define fb_writeb __raw_writeb
+#define fb_writew __raw_writew
+#define fb_writel __raw_writel
+#define fb_writeq __raw_writeq
+#define fb_memset memset_io
+
+#else
+
+#define fb_readb(addr) (*(volatile u8 *) (addr))
+#define fb_readw(addr) (*(volatile u16 *) (addr))
+#define fb_readl(addr) (*(volatile u32 *) (addr))
+#define fb_readq(addr) (*(volatile u64 *) (addr))
+#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
+#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
+#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
+#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
+#define fb_memset memset
+
+#endif
+
+    /*
+     *  `Generic' versions of the frame buffer device operations
+     */
+
+extern int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var); 
+extern int fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var); 
+extern int fb_blank(struct fb_info *info, int blank);
+extern int soft_cursor(struct fb_info *info, struct fb_cursor *cursor);
+extern void cfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); 
+extern void cfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); 
+extern void cfb_imageblit(struct fb_info *info, const struct fb_image *image);
+
+/* drivers/video/fbmem.c */
+extern int register_framebuffer(struct fb_info *fb_info);
+extern int unregister_framebuffer(struct fb_info *fb_info);
+extern int fb_prepare_logo(struct fb_info *fb_info);
+extern int fb_show_logo(struct fb_info *fb_info);
+extern char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size);
+extern void fb_iomove_buf_unaligned(struct fb_info *info, struct fb_pixmap *buf,
+				u8 *dst, u32 d_pitch, u8 *src, u32 idx,
+				u32 height, u32 shift_high, u32 shift_low, u32 mod);
+extern void fb_iomove_buf_aligned(struct fb_info *info, struct fb_pixmap *buf,
+				u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch,
+				u32 height);
+extern void fb_sysmove_buf_unaligned(struct fb_info *info, struct fb_pixmap *buf,
+				u8 *dst, u32 d_pitch, u8 *src, u32 idx,
+				u32 height, u32 shift_high, u32 shift_low, u32 mod);
+extern void fb_sysmove_buf_aligned(struct fb_info *info, struct fb_pixmap *buf,
+				u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch,
+				u32 height);
+extern void fb_set_suspend(struct fb_info *info, int state);
+extern int fb_get_color_depth(struct fb_var_screeninfo *var);
+extern int fb_get_options(char *name, char **option);
+extern int fb_new_modelist(struct fb_info *info);
+
+extern struct fb_info *registered_fb[FB_MAX];
+extern int num_registered_fb;
+
+/* drivers/video/fbsysfs.c */
+extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
+extern void framebuffer_release(struct fb_info *info);
+extern int fb_init_class_device(struct fb_info *fb_info);
+extern void fb_cleanup_class_device(struct fb_info *head);
+
+/* drivers/video/fbmon.c */
+#define FB_MAXTIMINGS		0
+#define FB_VSYNCTIMINGS		1
+#define FB_HSYNCTIMINGS		2
+#define FB_DCLKTIMINGS		3
+#define FB_IGNOREMON		0x100
+
+#define FB_MODE_IS_UNKNOWN	0
+#define FB_MODE_IS_DETAILED	1
+#define FB_MODE_IS_STANDARD	2
+#define FB_MODE_IS_VESA		4
+#define FB_MODE_IS_CALCULATED	8
+#define FB_MODE_IS_FIRST	16
+#define FB_MODE_IS_FROM_VAR     32
+
+extern int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal,
+			       const struct fb_info *fb_info);
+extern int fbmon_dpms(const struct fb_info *fb_info);
+extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
+		       struct fb_info *info);
+extern int fb_validate_mode(const struct fb_var_screeninfo *var,
+			    struct fb_info *info);
+extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
+extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs);
+extern void fb_destroy_modedb(struct fb_videomode *modedb);
+
+/* drivers/video/modedb.c */
+#define VESA_MODEDB_SIZE 34
+extern void fb_var_to_videomode(struct fb_videomode *mode,
+				struct fb_var_screeninfo *var);
+extern void fb_videomode_to_var(struct fb_var_screeninfo *var,
+				struct fb_videomode *mode);
+extern int fb_mode_is_equal(struct fb_videomode *mode1,
+			    struct fb_videomode *mode2);
+extern int fb_add_videomode(struct fb_videomode *mode, struct list_head *head);
+extern void fb_delete_videomode(struct fb_videomode *mode,
+				struct list_head *head);
+extern struct fb_videomode *fb_match_mode(struct fb_var_screeninfo *var,
+					  struct list_head *head);
+extern struct fb_videomode *fb_find_best_mode(struct fb_var_screeninfo *var,
+					      struct list_head *head);
+extern struct fb_videomode *fb_find_nearest_mode(struct fb_var_screeninfo *var,
+						 struct list_head *head);
+extern void fb_destroy_modelist(struct list_head *head);
+extern void fb_videomode_to_modelist(struct fb_videomode *modedb, int num,
+				     struct list_head *head);
+
+/* drivers/video/fbcmap.c */
+extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern void fb_dealloc_cmap(struct fb_cmap *cmap);
+extern int fb_copy_cmap(struct fb_cmap *from, struct fb_cmap *to);
+extern int fb_cmap_to_user(struct fb_cmap *from, struct fb_cmap_user *to);
+extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
+extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
+extern struct fb_cmap *fb_default_cmap(int len);
+extern void fb_invert_cmaps(void);
+
+struct fb_videomode {
+	const char *name;	/* optional */
+	u32 refresh;		/* optional */
+	u32 xres;
+	u32 yres;
+	u32 pixclock;
+	u32 left_margin;
+	u32 right_margin;
+	u32 upper_margin;
+	u32 lower_margin;
+	u32 hsync_len;
+	u32 vsync_len;
+	u32 sync;
+	u32 vmode;
+	u32 flag;
+};
+
+extern const struct fb_videomode vesa_modes[];
+
+struct fb_modelist {
+	struct list_head list;
+	struct fb_videomode mode;
+};
+
+extern int fb_find_mode(struct fb_var_screeninfo *var,
+			struct fb_info *info, const char *mode_option,
+			const struct fb_videomode *db,
+			unsigned int dbsize,
+			const struct fb_videomode *default_mode,
+			unsigned int default_bpp);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FB_H */
diff --git a/include/linux/fcdevice.h b/include/linux/fcdevice.h
new file mode 100644
index 000000000000..e460ef831984
--- /dev/null
+++ b/include/linux/fcdevice.h
@@ -0,0 +1,33 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Fibre Channel handlers.
+ *
+ * Version:	@(#)fcdevice.h	1.0.0	09/26/98
+ *
+ * Authors:	Vineet Abraham <vma@iol.unh.edu>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_FCDEVICE_H
+#define _LINUX_FCDEVICE_H
+
+
+#include <linux/if_fc.h>
+
+#ifdef __KERNEL__
+extern struct net_device *alloc_fcdev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_FCDEVICE_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
new file mode 100644
index 000000000000..704fb76b6334
--- /dev/null
+++ b/include/linux/fcntl.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_FCNTL_H
+#define _LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE+0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE+1)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#ifdef __KERNEL__
+
+#if BITS_PER_LONG == 32
+#define IS_GETLK32(cmd)		((cmd) == F_GETLK)
+#define IS_SETLK32(cmd)		((cmd) == F_SETLK)
+#define IS_SETLKW32(cmd)	((cmd) == F_SETLKW)
+#define IS_GETLK64(cmd)		((cmd) == F_GETLK64)
+#define IS_SETLK64(cmd)		((cmd) == F_SETLK64)
+#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW64)
+#else
+#define IS_GETLK32(cmd)		(0)
+#define IS_SETLK32(cmd)		(0)
+#define IS_SETLKW32(cmd)	(0)
+#define IS_GETLK64(cmd)		((cmd) == F_GETLK)
+#define IS_SETLK64(cmd)		((cmd) == F_SETLK)
+#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW)
+#endif /* BITS_PER_LONG == 32 */
+
+#define IS_GETLK(cmd)	(IS_GETLK32(cmd)  || IS_GETLK64(cmd))
+#define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
+#define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
new file mode 100644
index 000000000000..b6bd41d2b460
--- /dev/null
+++ b/include/linux/fd.h
@@ -0,0 +1,374 @@
+#ifndef _LINUX_FD_H
+#define _LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* !=0 means double track steps */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+#endif
diff --git a/include/linux/fd1772.h b/include/linux/fd1772.h
new file mode 100644
index 000000000000..871d6e4c677e
--- /dev/null
+++ b/include/linux/fd1772.h
@@ -0,0 +1,80 @@
+#ifndef _LINUX_FD1772REG_H
+#define _LINUX_FD1772REG_H
+
+/*
+** WD1772 stuff - originally from the M68K Linux
+ * Modified for Archimedes by Dave Gilbert (gilbertd@cs.man.ac.uk)
+ */
+
+/* register codes */
+
+#define FDC1772SELREG_STP   (0x80)   /* command/status register */
+#define FDC1772SELREG_TRA   (0x82)   /* track register */
+#define FDC1772SELREG_SEC   (0x84)   /* sector register */
+#define FDC1772SELREG_DTA   (0x86)   /* data register */
+
+/* register names for FDC1772_READ/WRITE macros */
+
+#define FDC1772REG_CMD         0
+#define FDC1772REG_STATUS      0
+#define FDC1772REG_TRACK       2
+#define FDC1772REG_SECTOR      4
+#define FDC1772REG_DATA                6
+
+/* command opcodes */
+
+#define FDC1772CMD_RESTORE  (0x00)   /*  -                   */
+#define FDC1772CMD_SEEK     (0x10)   /*   |                  */
+#define FDC1772CMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
+#define FDC1772CMD_STIN     (0x40)   /*   |                  */
+#define FDC1772CMD_STOT     (0x60)   /*  -                   */
+#define FDC1772CMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
+#define FDC1772CMD_WRSEC    (0xa0)   /*  -          "        */
+#define FDC1772CMD_RDADR    (0xc0)   /*  -                   */
+#define FDC1772CMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
+#define FDC1772CMD_WRTRA    (0xf0)   /*  -                   */
+#define FDC1772CMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
+
+/* command modifier bits */
+
+#define FDC1772CMDADD_SR6   (0x00)   /* step rate settings */
+#define FDC1772CMDADD_SR12  (0x01)
+#define FDC1772CMDADD_SR2   (0x02)
+#define FDC1772CMDADD_SR3   (0x03)
+#define FDC1772CMDADD_V     (0x04)   /* verify */
+#define FDC1772CMDADD_H     (0x08)   /* wait for spin-up */
+#define FDC1772CMDADD_U     (0x10)   /* update track register */
+#define FDC1772CMDADD_M     (0x10)   /* multiple sector access */
+#define FDC1772CMDADD_E     (0x04)   /* head settling flag */
+#define FDC1772CMDADD_P     (0x02)   /* precompensation */
+#define FDC1772CMDADD_A0    (0x01)   /* DAM flag */
+
+/* status register bits */
+
+#define        FDC1772STAT_MOTORON     (0x80)   /* motor on */
+#define        FDC1772STAT_WPROT       (0x40)   /* write protected (FDC1772CMD_WR*) */
+#define        FDC1772STAT_SPINUP      (0x20)   /* motor speed stable (Type I) */
+#define        FDC1772STAT_DELDAM      (0x20)   /* sector has deleted DAM (Type II+III) */
+#define        FDC1772STAT_RECNF       (0x10)   /* record not found */
+#define        FDC1772STAT_CRC         (0x08)   /* CRC error */
+#define        FDC1772STAT_TR00        (0x04)   /* Track 00 flag (Type I) */
+#define        FDC1772STAT_LOST        (0x04)   /* Lost Data (Type II+III) */
+#define        FDC1772STAT_IDX         (0x02)   /* Index status (Type I) */
+#define        FDC1772STAT_DRQ         (0x02)   /* DRQ status (Type II+III) */
+#define        FDC1772STAT_BUSY        (0x01)   /* FDC1772 is busy */
+
+
+/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
+#define DSKSIDE     (0x01)
+        
+#define DSKDRVNONE  (0x06)
+#define DSKDRV0     (0x02)
+#define DSKDRV1     (0x04)
+
+/* step rates */
+#define        FDC1772STEP_6   0x00
+#define        FDC1772STEP_12  0x01
+#define        FDC1772STEP_2   0x02
+#define        FDC1772STEP_3   0x03
+
+#endif
diff --git a/include/linux/fddidevice.h b/include/linux/fddidevice.h
new file mode 100644
index 000000000000..2e5ee47f3e1e
--- /dev/null
+++ b/include/linux/fddidevice.h
@@ -0,0 +1,33 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the FDDI handlers.
+ *
+ * Version:	@(#)fddidevice.h	1.0.0	08/12/96
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		fddidevice.h is based on previous trdevice.h work by
+ *			Ross Biro, <bir7@leland.Stanford.Edu>
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_FDDIDEVICE_H
+#define _LINUX_FDDIDEVICE_H
+
+#include <linux/if_fddi.h>
+
+#ifdef __KERNEL__
+extern unsigned short	fddi_type_trans(struct sk_buff *skb,
+				struct net_device *dev);
+extern struct net_device *alloc_fddidev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_FDDIDEVICE_H */
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
new file mode 100644
index 000000000000..c2eeb63b72db
--- /dev/null
+++ b/include/linux/fdreg.h
@@ -0,0 +1,137 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+/*
+ * This file contains some defines for the floppy disk controller.
+ * Various sources. Mostly "IBM Microcomputers: A Programmers
+ * Handbook", Sanches and Canton.
+ */
+
+#ifdef FDPATCHES
+#define FD_IOPORT fdc_state[fdc].address
+#else
+/* It would be a lot saner just to force fdc_state[fdc].address to always
+   be set ! FIXME */
+#define FD_IOPORT 0x3f0
+#endif
+
+/* Fd controller regs. S&C, about page 340 */
+#define FD_STATUS	(4 + FD_IOPORT )
+#define FD_DATA		(5 + FD_IOPORT )
+
+/* Digital Output Register */
+#define FD_DOR		(2 + FD_IOPORT )
+
+/* Digital Input Register (read) */
+#define FD_DIR		(7 + FD_IOPORT )
+
+/* Diskette Control Register (write)*/
+#define FD_DCR		(7 + FD_IOPORT )
+
+/* Bits of main status register */
+#define STATUS_BUSYMASK	0x0F		/* drive busy mask */
+#define STATUS_BUSY	0x10		/* FDC busy */
+#define STATUS_DMA	0x20		/* 0- DMA mode */
+#define STATUS_DIR	0x40		/* 0- cpu->fdc */
+#define STATUS_READY	0x80		/* Data reg ready */
+
+/* Bits of FD_ST0 */
+#define ST0_DS		0x03		/* drive select mask */
+#define ST0_HA		0x04		/* Head (Address) */
+#define ST0_NR		0x08		/* Not Ready */
+#define ST0_ECE		0x10		/* Equipment check error */
+#define ST0_SE		0x20		/* Seek end */
+#define ST0_INTR	0xC0		/* Interrupt code mask */
+
+/* Bits of FD_ST1 */
+#define ST1_MAM		0x01		/* Missing Address Mark */
+#define ST1_WP		0x02		/* Write Protect */
+#define ST1_ND		0x04		/* No Data - unreadable */
+#define ST1_OR		0x10		/* OverRun */
+#define ST1_CRC		0x20		/* CRC error in data or addr */
+#define ST1_EOC		0x80		/* End Of Cylinder */
+
+/* Bits of FD_ST2 */
+#define ST2_MAM		0x01		/* Missing Address Mark (again) */
+#define ST2_BC		0x02		/* Bad Cylinder */
+#define ST2_SNS		0x04		/* Scan Not Satisfied */
+#define ST2_SEH		0x08		/* Scan Equal Hit */
+#define ST2_WC		0x10		/* Wrong Cylinder */
+#define ST2_CRC		0x20		/* CRC error in data field */
+#define ST2_CM		0x40		/* Control Mark = deleted */
+
+/* Bits of FD_ST3 */
+#define ST3_HA		0x04		/* Head (Address) */
+#define ST3_DS		0x08		/* drive is double-sided */
+#define ST3_TZ		0x10		/* Track Zero signal (1=track 0) */
+#define ST3_RY		0x20		/* drive is ready */
+#define ST3_WP		0x40		/* Write Protect */
+#define ST3_FT		0x80		/* Drive Fault */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+#define FD_GETSTATUS		0x04	/* read ST3 */
+#define FD_DUMPREGS		0x0E	/* dump the contents of the fdc regs */
+#define FD_READID		0xEA	/* prints the header of a sector */
+#define FD_UNLOCK		0x14	/* Fifo config unlock */
+#define FD_LOCK			0x94	/* Fifo config lock */
+#define FD_RSEEK_OUT		0x8f	/* seek out (i.e. to lower tracks) */
+#define FD_RSEEK_IN		0xcf	/* seek in (i.e. to higher tracks) */
+
+/* the following commands are new in the 82078. They are not used in the
+ * floppy driver, except the first three. These commands may be useful for apps
+ * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
+ * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
+
+#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
+#define FD_SAVE			0x2e	/* save fdc regs for later restore */
+#define FD_DRIVESPEC		0x8e	/* drive specification: Access to the
+					 * 2 Mbps data transfer rate for tape
+					 * drives */
+
+#define FD_RESTORE		0x4e    /* later restore */
+#define FD_POWERDOWN		0x27	/* configure FDC's powersave features */
+#define FD_FORMAT_N_WRITE	0xef    /* format and write in one go. */
+#define FD_OPTION		0x33	/* ISO format (which is a clean way to
+					 * pack more sectors on a track) */
+
+/* DMA commands */
+#define DMA_READ	0x46
+#define DMA_WRITE	0x4A
+
+/* FDC version return types */
+#define FDC_NONE	0x00
+#define FDC_UNKNOWN	0x10	/* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
+				   FAILS EARLY */
+#define FDC_8272A	0x20	/* Intel 8272a, NEC 765 */
+#define FDC_765ED	0x30	/* Non-Intel 1MB-compatible FDC, can't detect */
+#define FDC_82072	0x40	/* Intel 82072; 8272a + FIFO + DUMPREGS */
+#define FDC_82072A	0x45	/* 82072A (on Sparcs) */
+#define FDC_82077_ORIG	0x51	/* Original version of 82077AA, sans LOCK */
+#define FDC_82077	0x52	/* 82077AA-1 */
+#define FDC_82078_UNKN	0x5f	/* Unknown 82078 variant */
+#define FDC_82078	0x60	/* 44pin 82078 or 64pin 82078SL */
+#define FDC_82078_1	0x61	/* 82078-1 (2Mbps fdc) */
+#define FDC_S82078B	0x62	/* S82078B (first seen on Adaptec AVA-2825 VLB
+				 * SCSI/EIDE/Floppy controller) */
+#define FDC_87306	0x63	/* National Semiconductor PC 87306 */
+
+/*
+ * Beware: the fdc type list is roughly sorted by increasing features.
+ * Presence of features is tested by comparing the FDC version id with the
+ * "oldest" version that has the needed feature.
+ * If during FDC detection, an obscure test fails late in the sequence, don't
+ * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
+ * This is especially true if the tests are unneeded.
+ */
+
+#define FD_RESET_DELAY 20
+#endif
diff --git a/include/linux/file.h b/include/linux/file.h
new file mode 100644
index 000000000000..5206beb9a80e
--- /dev/null
+++ b/include/linux/file.h
@@ -0,0 +1,84 @@
+/*
+ * Wrapper functions for accessing the file_struct fd array.
+ */
+
+#ifndef __LINUX_FILE_H
+#define __LINUX_FILE_H
+
+#include <asm/atomic.h>
+#include <linux/posix_types.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+/*
+ * The default fd array needs to be at least BITS_PER_LONG,
+ * as this is the granularity returned by copy_fdset().
+ */
+#define NR_OPEN_DEFAULT BITS_PER_LONG
+
+/*
+ * Open file table structure
+ */
+struct files_struct {
+        atomic_t count;
+        spinlock_t file_lock;     /* Protects all the below members.  Nests inside tsk->alloc_lock */
+        int max_fds;
+        int max_fdset;
+        int next_fd;
+        struct file ** fd;      /* current fd array */
+        fd_set *close_on_exec;
+        fd_set *open_fds;
+        fd_set close_on_exec_init;
+        fd_set open_fds_init;
+        struct file * fd_array[NR_OPEN_DEFAULT];
+};
+
+extern void FASTCALL(__fput(struct file *));
+extern void FASTCALL(fput(struct file *));
+
+static inline void fput_light(struct file *file, int fput_needed)
+{
+	if (unlikely(fput_needed))
+		fput(file);
+}
+
+extern struct file * FASTCALL(fget(unsigned int fd));
+extern struct file * FASTCALL(fget_light(unsigned int fd, int *fput_needed));
+extern void FASTCALL(set_close_on_exec(unsigned int fd, int flag));
+extern void put_filp(struct file *);
+extern int get_unused_fd(void);
+extern void FASTCALL(put_unused_fd(unsigned int fd));
+struct kmem_cache_s;
+extern void filp_ctor(void * objp, struct kmem_cache_s *cachep, unsigned long cflags);
+extern void filp_dtor(void * objp, struct kmem_cache_s *cachep, unsigned long dflags);
+
+extern struct file ** alloc_fd_array(int);
+extern void free_fd_array(struct file **, int);
+
+extern fd_set *alloc_fdset(int);
+extern void free_fdset(fd_set *, int);
+
+extern int expand_files(struct files_struct *, int nr);
+
+static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
+{
+	struct file * file = NULL;
+
+	if (fd < files->max_fds)
+		file = files->fd[fd];
+	return file;
+}
+
+/*
+ * Check whether the specified fd has an open file.
+ */
+#define fcheck(fd)	fcheck_files(current->files, fd)
+
+extern void FASTCALL(fd_install(unsigned int fd, struct file * file));
+
+struct task_struct;
+
+struct files_struct *get_files_struct(struct task_struct *);
+void FASTCALL(put_files_struct(struct files_struct *fs));
+
+#endif /* __LINUX_FILE_H */
diff --git a/include/linux/filter.h b/include/linux/filter.h
new file mode 100644
index 000000000000..3ba843c46382
--- /dev/null
+++ b/include/linux/filter.h
@@ -0,0 +1,151 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef __LINUX_FILTER_H__
+#define __LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <asm/atomic.h>
+#endif
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ *	Try and keep these values and structures similar to BSD, especially
+ *	the BPF code definitions which need to match so you can share filters
+ */
+ 
+struct sock_filter	/* Filter block */
+{
+        __u16	code;   /* Actual filter code */
+        __u8	jt;	/* Jump true */
+        __u8	jf;	/* Jump false */
+        __u32	k;      /* Generic multiuse field */
+};
+
+struct sock_fprog	/* Required for SO_ATTACH_FILTER. */
+{
+	unsigned short		len;	/* Number of filter blocks */
+	struct sock_filter __user *filter;
+};
+
+#ifdef __KERNEL__
+struct sk_filter
+{
+	atomic_t		refcnt;
+        unsigned int         	len;	/* Number of filter blocks */
+        struct sock_filter     	insns[0];
+};
+
+static inline unsigned int sk_filter_len(struct sk_filter *fp)
+{
+	return fp->len*sizeof(struct sock_filter) + sizeof(*fp);
+}
+#endif
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define         BPF_LD          0x00
+#define         BPF_LDX         0x01
+#define         BPF_ST          0x02
+#define         BPF_STX         0x03
+#define         BPF_ALU         0x04
+#define         BPF_JMP         0x05
+#define         BPF_RET         0x06
+#define         BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define         BPF_W           0x00
+#define         BPF_H           0x08
+#define         BPF_B           0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define         BPF_IMM         0x00
+#define         BPF_ABS         0x20
+#define         BPF_IND         0x40
+#define         BPF_MEM         0x60
+#define         BPF_LEN         0x80
+#define         BPF_MSH         0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define         BPF_ADD         0x00
+#define         BPF_SUB         0x10
+#define         BPF_MUL         0x20
+#define         BPF_DIV         0x30
+#define         BPF_OR          0x40
+#define         BPF_AND         0x50
+#define         BPF_LSH         0x60
+#define         BPF_RSH         0x70
+#define         BPF_NEG         0x80
+#define         BPF_JA          0x00
+#define         BPF_JEQ         0x10
+#define         BPF_JGT         0x20
+#define         BPF_JGE         0x30
+#define         BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define         BPF_K           0x00
+#define         BPF_X           0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code)  ((code) & 0x18)
+#define         BPF_A           0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define         BPF_TAX         0x00
+#define         BPF_TXA         0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+   We use them to reference ancillary data.
+   Unlike introduction new instructions, it does not break
+   existing compilers/optimizers.
+ */
+#define SKF_AD_OFF    (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 	4
+#define SKF_AD_IFINDEX 	8
+#define SKF_AD_MAX 	12
+#define SKF_NET_OFF   (-0x100000)
+#define SKF_LL_OFF    (-0x200000)
+
+#ifdef __KERNEL__
+struct sk_buff;
+struct sock;
+
+extern int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int flen);
+extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
+extern int sk_chk_filter(struct sock_filter *filter, int flen);
+#endif /* __KERNEL__ */
+
+#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
new file mode 100644
index 000000000000..886255b69bb9
--- /dev/null
+++ b/include/linux/firmware.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_FIRMWARE_H
+#define _LINUX_FIRMWARE_H
+#include <linux/module.h>
+#include <linux/types.h>
+#define FIRMWARE_NAME_MAX 30 
+struct firmware {
+	size_t size;
+	u8 *data;
+};
+struct device;
+int request_firmware(const struct firmware **fw, const char *name,
+		     struct device *device);
+int request_firmware_nowait(
+	struct module *module,
+	const char *name, struct device *device, void *context,
+	void (*cont)(const struct firmware *fw, void *context));
+
+void release_firmware(const struct firmware *fw);
+void register_firmware(const char *name, const u8 *data, size_t size);
+#endif
diff --git a/include/linux/flat.h b/include/linux/flat.h
new file mode 100644
index 000000000000..ec56852e2659
--- /dev/null
+++ b/include/linux/flat.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *                          The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _LINUX_FLAT_H
+#define _LINUX_FLAT_H
+
+#ifdef __KERNEL__
+#include <asm/flat.h>
+#endif
+
+#define	FLAT_VERSION			0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define	MAX_SHARED_LIBS			(4)
+#else
+#define	MAX_SHARED_LIBS			(1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development,  all fields are in network byte order.
+ */
+
+struct flat_hdr {
+	char magic[4];
+	unsigned long rev;          /* version (as above) */
+	unsigned long entry;        /* Offset of first executable instruction
+	                               with text segment from beginning of file */
+	unsigned long data_start;   /* Offset of data segment from beginning of
+	                               file */
+	unsigned long data_end;     /* Offset of end of data segment
+	                               from beginning of file */
+	unsigned long bss_end;      /* Offset of end of bss segment from beginning
+	                               of file */
+
+	/* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+	unsigned long stack_size;   /* Size of stack, in bytes */
+	unsigned long reloc_start;  /* Offset of relocation records from
+	                               beginning of file */
+	unsigned long reloc_count;  /* Number of relocation records */
+	unsigned long flags;       
+	unsigned long build_date;   /* When the program/library was built */
+	unsigned long filler[5];    /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
+/*
+ * While it would be nice to keep this header clean,  users of older
+ * tools still need this support in the kernel.  So this section is
+ * purely for compatibility with old tool chains.
+ *
+ * DO NOT make changes or enhancements to the old format please,  just work
+ *        with the format above,  except to fix bugs with old format support.
+ */
+
+#include <asm/byteorder.h>
+
+#define	OLD_FLAT_VERSION			0x00000002L
+#define OLD_FLAT_RELOC_TYPE_TEXT	0
+#define OLD_FLAT_RELOC_TYPE_DATA	1
+#define OLD_FLAT_RELOC_TYPE_BSS		2
+
+typedef union {
+	unsigned long	value;
+	struct {
+# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
+		signed long offset : 30;
+		unsigned long type : 2;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned long type : 2;
+		signed long offset : 30;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# elif defined(__LITTLE_ENDIAN_BITFIELD)
+		signed long offset : 30;
+		unsigned long type : 2;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# else
+#   	error "Unknown bitfield order for flat files."
+# endif
+	} reloc;
+} flat_v2_reloc_t;
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FLAT_H */
diff --git a/include/linux/font.h b/include/linux/font.h
new file mode 100644
index 000000000000..fc2d690c9d5f
--- /dev/null
+++ b/include/linux/font.h
@@ -0,0 +1,53 @@
+/*
+ *  font.h -- `Soft' font definitions
+ *
+ *  Created 1995 by Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _VIDEO_FONT_H
+#define _VIDEO_FONT_H
+
+#include <linux/types.h>
+
+struct font_desc {
+    int idx;
+    char *name;
+    int width, height;
+    void *data;
+    int pref;
+};
+
+#define VGA8x8_IDX	0
+#define VGA8x16_IDX	1
+#define PEARL8x8_IDX	2
+#define VGA6x11_IDX	3
+#define SUN8x16_IDX	4
+#define SUN12x22_IDX	5
+#define ACORN8x8_IDX	6
+#define	MINI4x6_IDX	7
+
+extern struct font_desc	font_vga_8x8,
+				font_vga_8x16,
+				font_pearl_8x8,
+				font_vga_6x11,
+				font_sun_8x16,
+				font_sun_12x22,
+				font_acorn_8x8,
+				font_mini_4x6;
+
+/* Find a font with a specific name */
+
+extern struct font_desc *find_font(char *name);
+
+/* Get the default font for a specific screen size */
+
+extern struct font_desc *get_default_font(int xres, int yres);
+
+/* Max. length for the name of a predefined font */
+#define MAX_FONT_NAME	32
+
+#endif /* _VIDEO_FONT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
new file mode 100644
index 000000000000..5df687d940fa
--- /dev/null
+++ b/include/linux/fs.h
@@ -0,0 +1,1677 @@
+#ifndef _LINUX_FS_H
+#define _LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/config.h>
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define NR_OPEN (1024*1024)	/* Absolute upper limit on fd num */
+#define INR_OPEN 1024		/* Initial setting for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	int nr_files;		/* read only */
+	int nr_free_files;	/* read only */
+	int max_files;		/* tunable */
+};
+extern struct files_stat_struct files_stat;
+
+struct inodes_stat_t {
+	int nr_inodes;
+	int nr_unused;
+	int dummy[5];
+};
+extern struct inodes_stat_t inodes_stat;
+
+extern int leases_enable, lease_break_time;
+
+#ifdef CONFIG_DNOTIFY
+extern int dir_notify_enable;
+#endif
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+#define MAY_EXEC 1
+#define MAY_WRITE 2
+#define MAY_READ 4
+#define MAY_APPEND 8
+
+#define FMODE_READ 1
+#define FMODE_WRITE 2
+
+/* Internal kernel extensions */
+#define FMODE_LSEEK	4
+#define FMODE_PREAD	8
+#define FMODE_PWRITE	FMODE_PREAD	/* These go hand in hand */
+
+#define RW_MASK		1
+#define RWA_MASK	2
+#define READ 0
+#define WRITE 1
+#define READA 2		/* read-ahead  - don't block if no resources */
+#define SPECIAL 4	/* For non-blockdevice requests in request queue */
+#define READ_SYNC	(READ | (1 << BIO_RW_SYNC))
+#define WRITE_SYNC	(WRITE | (1 << BIO_RW_SYNC))
+#define WRITE_BARRIER	((1 << BIO_RW) | (1 << BIO_RW_BARRIER))
+
+#define SEL_IN		1
+#define SEL_OUT		2
+#define SEL_EX		4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1 
+#define FS_BINARY_MOUNTDATA 2
+#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
+#define FS_ODD_RENAME	32768	/* Temporary stuff; will go away as soon
+				  * as nfs_rename() will be cleaned up
+				  */
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_NOATIME|\
+			 MS_NODIRATIME)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC		1	/* Writes are synced at once */
+#define S_NOATIME	2	/* Do not update access times */
+#define S_APPEND	4	/* Append-only file */
+#define S_IMMUTABLE	8	/* Immutable file */
+#define S_DEAD		16	/* removed, but still open directory */
+#define S_NOQUOTA	32	/* Inode is not counted to quota */
+#define S_DIRSYNC	64	/* Directory modifications are synchronous */
+#define S_NOCMTIME	128	/* Do not update file c/mtime */
+#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE	512	/* Inode is fs-internal */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use.  This means that all of the inodes will not have their
+ * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
+					((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
+
+#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
+#define IS_NOATIME(inode)	(__IS_FLG(inode, MS_NOATIME) || ((inode)->i_flags & S_NOATIME))
+#define IS_NODIRATIME(inode)	__IS_FLG(inode, MS_NODIRATIME)
+#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+
+#ifdef __KERNEL__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <linux/dcache.h>
+#include <linux/stat.h>
+#include <linux/cache.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/prio_tree.h>
+#include <linux/init.h>
+
+#include <asm/atomic.h>
+#include <asm/semaphore.h>
+#include <asm/byteorder.h>
+
+struct iovec;
+struct nameidata;
+struct pipe_inode_info;
+struct poll_table_struct;
+struct kstatfs;
+struct vm_area_struct;
+struct vfsmount;
+
+/* Used to be a macro which just called the function, now just a function */
+extern void update_atime (struct inode *);
+
+extern void __init inode_init(unsigned long);
+extern void __init inode_init_early(void);
+extern void __init mnt_init(unsigned long);
+extern void __init files_init(unsigned long);
+
+struct buffer_head;
+typedef int (get_block_t)(struct inode *inode, sector_t iblock,
+			struct buffer_head *bh_result, int create);
+typedef int (get_blocks_t)(struct inode *inode, sector_t iblock,
+			unsigned long max_blocks,
+			struct buffer_head *bh_result, int create);
+typedef void (dio_iodone_t)(struct inode *inode, loff_t offset,
+			ssize_t bytes, void *private);
+
+/*
+ * Attribute flags.  These should be or-ed together to figure out what
+ * has been changed!
+ */
+#define ATTR_MODE	1
+#define ATTR_UID	2
+#define ATTR_GID	4
+#define ATTR_SIZE	8
+#define ATTR_ATIME	16
+#define ATTR_MTIME	32
+#define ATTR_CTIME	64
+#define ATTR_ATIME_SET	128
+#define ATTR_MTIME_SET	256
+#define ATTR_FORCE	512	/* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	1024
+#define ATTR_KILL_SUID	2048
+#define ATTR_KILL_SGID	4096
+
+/*
+ * This is the Inode Attributes structure, used for notify_change().  It
+ * uses the above definitions as flags, to know which values have changed.
+ * Also, in this manner, a Filesystem can look at only the values it cares
+ * about.  Basically, these are the attributes that the VFS layer can
+ * request to change from the FS layer.
+ *
+ * Derek Atkins <warlord@MIT.EDU> 94-10-20
+ */
+struct iattr {
+	unsigned int	ia_valid;
+	umode_t		ia_mode;
+	uid_t		ia_uid;
+	gid_t		ia_gid;
+	loff_t		ia_size;
+	struct timespec	ia_atime;
+	struct timespec	ia_mtime;
+	struct timespec	ia_ctime;
+	unsigned int	ia_attr_flags;
+};
+
+/*
+ * This is the inode attributes flag definitions
+ */
+#define ATTR_FLAG_SYNCRONOUS	1 	/* Syncronous write */
+#define ATTR_FLAG_NOATIME	2 	/* Don't update atime */
+#define ATTR_FLAG_APPEND	4 	/* Append-only file */
+#define ATTR_FLAG_IMMUTABLE	8 	/* Immutable file */
+#define ATTR_FLAG_NODIRATIME	16 	/* Don't update atime for directory */
+
+/*
+ * Includes for diskquotas.
+ */
+#include <linux/quota.h>
+
+/*
+ * oh the beauties of C type declarations.
+ */
+struct page;
+struct address_space;
+struct writeback_control;
+struct kiocb;
+
+struct address_space_operations {
+	int (*writepage)(struct page *page, struct writeback_control *wbc);
+	int (*readpage)(struct file *, struct page *);
+	int (*sync_page)(struct page *);
+
+	/* Write back some dirty pages from this mapping. */
+	int (*writepages)(struct address_space *, struct writeback_control *);
+
+	/* Set a page dirty */
+	int (*set_page_dirty)(struct page *page);
+
+	int (*readpages)(struct file *filp, struct address_space *mapping,
+			struct list_head *pages, unsigned nr_pages);
+
+	/*
+	 * ext3 requires that a successful prepare_write() call be followed
+	 * by a commit_write() call - they must be balanced
+	 */
+	int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
+	int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
+	/* Unfortunately this kludge is needed for FIBMAP. Don't use it */
+	sector_t (*bmap)(struct address_space *, sector_t);
+	int (*invalidatepage) (struct page *, unsigned long);
+	int (*releasepage) (struct page *, int);
+	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
+			loff_t offset, unsigned long nr_segs);
+};
+
+struct backing_dev_info;
+struct address_space {
+	struct inode		*host;		/* owner: inode, block_device */
+	struct radix_tree_root	page_tree;	/* radix tree of all pages */
+	rwlock_t		tree_lock;	/* and rwlock protecting it */
+	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
+	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
+	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
+	spinlock_t		i_mmap_lock;	/* protect tree, count, list */
+	unsigned int		truncate_count;	/* Cover race condition with truncate */
+	unsigned long		nrpages;	/* number of total pages */
+	pgoff_t			writeback_index;/* writeback starts here */
+	struct address_space_operations *a_ops;	/* methods */
+	unsigned long		flags;		/* error bits/gfp mask */
+	struct backing_dev_info *backing_dev_info; /* device readahead, etc */
+	spinlock_t		private_lock;	/* for use by the address_space */
+	struct list_head	private_list;	/* ditto */
+	struct address_space	*assoc_mapping;	/* ditto */
+} __attribute__((aligned(sizeof(long))));
+	/*
+	 * On most architectures that alignment is already the case; but
+	 * must be enforced here for CRIS, to let the least signficant bit
+	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
+	 */
+
+struct block_device {
+	dev_t			bd_dev;  /* not a kdev_t - it's a search key */
+	struct inode *		bd_inode;	/* will die */
+	int			bd_openers;
+	struct semaphore	bd_sem;	/* open/close mutex */
+	struct semaphore	bd_mount_sem;	/* mount mutex */
+	struct list_head	bd_inodes;
+	void *			bd_holder;
+	int			bd_holders;
+	struct block_device *	bd_contains;
+	unsigned		bd_block_size;
+	struct hd_struct *	bd_part;
+	/* number of times partitions within this device have been opened. */
+	unsigned		bd_part_count;
+	int			bd_invalidated;
+	struct gendisk *	bd_disk;
+	struct list_head	bd_list;
+	struct backing_dev_info *bd_inode_backing_dev_info;
+	/*
+	 * Private data.  You must have bd_claim'ed the block_device
+	 * to use this.  NOTE:  bd_claim allows an owner to claim
+	 * the same device multiple times, the owner must take special
+	 * care to not mess up bd_private for that case.
+	 */
+	unsigned long		bd_private;
+};
+
+/*
+ * Radix-tree tags, for tagging dirty and writeback pages within the pagecache
+ * radix trees
+ */
+#define PAGECACHE_TAG_DIRTY	0
+#define PAGECACHE_TAG_WRITEBACK	1
+
+int mapping_tagged(struct address_space *mapping, int tag);
+
+/*
+ * Might pages of this file be mapped into userspace?
+ */
+static inline int mapping_mapped(struct address_space *mapping)
+{
+	return	!prio_tree_empty(&mapping->i_mmap) ||
+		!list_empty(&mapping->i_mmap_nonlinear);
+}
+
+/*
+ * Might pages of this file have been modified in userspace?
+ * Note that i_mmap_writable counts all VM_SHARED vmas: do_mmap_pgoff
+ * marks vma as VM_SHARED if it is shared, and the file was opened for
+ * writing i.e. vma may be mprotected writable even if now readonly.
+ */
+static inline int mapping_writably_mapped(struct address_space *mapping)
+{
+	return mapping->i_mmap_writable != 0;
+}
+
+/*
+ * Use sequence counter to get consistent i_size on 32-bit processors.
+ */
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#include <linux/seqlock.h>
+#define __NEED_I_SIZE_ORDERED
+#define i_size_ordered_init(inode) seqcount_init(&inode->i_size_seqcount)
+#else
+#define i_size_ordered_init(inode) do { } while (0)
+#endif
+
+struct inode {
+	struct hlist_node	i_hash;
+	struct list_head	i_list;
+	struct list_head	i_sb_list;
+	struct list_head	i_dentry;
+	unsigned long		i_ino;
+	atomic_t		i_count;
+	umode_t			i_mode;
+	unsigned int		i_nlink;
+	uid_t			i_uid;
+	gid_t			i_gid;
+	dev_t			i_rdev;
+	loff_t			i_size;
+	struct timespec		i_atime;
+	struct timespec		i_mtime;
+	struct timespec		i_ctime;
+	unsigned int		i_blkbits;
+	unsigned long		i_blksize;
+	unsigned long		i_version;
+	unsigned long		i_blocks;
+	unsigned short          i_bytes;
+	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
+	struct semaphore	i_sem;
+	struct rw_semaphore	i_alloc_sem;
+	struct inode_operations	*i_op;
+	struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
+	struct super_block	*i_sb;
+	struct file_lock	*i_flock;
+	struct address_space	*i_mapping;
+	struct address_space	i_data;
+#ifdef CONFIG_QUOTA
+	struct dquot		*i_dquot[MAXQUOTAS];
+#endif
+	/* These three should probably be a union */
+	struct list_head	i_devices;
+	struct pipe_inode_info	*i_pipe;
+	struct block_device	*i_bdev;
+	struct cdev		*i_cdev;
+	int			i_cindex;
+
+	__u32			i_generation;
+
+#ifdef CONFIG_DNOTIFY
+	unsigned long		i_dnotify_mask; /* Directory notify events */
+	struct dnotify_struct	*i_dnotify; /* for directory notifications */
+#endif
+
+	unsigned long		i_state;
+	unsigned long		dirtied_when;	/* jiffies of first dirtying */
+
+	unsigned int		i_flags;
+
+	atomic_t		i_writecount;
+	void			*i_security;
+	union {
+		void		*generic_ip;
+	} u;
+#ifdef __NEED_I_SIZE_ORDERED
+	seqcount_t		i_size_seqcount;
+#endif
+};
+
+/*
+ * NOTE: in a 32bit arch with a preemptable kernel and
+ * an UP compile the i_size_read/write must be atomic
+ * with respect to the local cpu (unlike with preempt disabled),
+ * but they don't need to be atomic with respect to other cpus like in
+ * true SMP (so they need either to either locally disable irq around
+ * the read or for example on x86 they can be still implemented as a
+ * cmpxchg8b without the need of the lock prefix). For SMP compiles
+ * and 64bit archs it makes no difference if preempt is enabled or not.
+ */
+static inline loff_t i_size_read(struct inode *inode)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	loff_t i_size;
+	unsigned int seq;
+
+	do {
+		seq = read_seqcount_begin(&inode->i_size_seqcount);
+		i_size = inode->i_size;
+	} while (read_seqcount_retry(&inode->i_size_seqcount, seq));
+	return i_size;
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
+	loff_t i_size;
+
+	preempt_disable();
+	i_size = inode->i_size;
+	preempt_enable();
+	return i_size;
+#else
+	return inode->i_size;
+#endif
+}
+
+
+static inline void i_size_write(struct inode *inode, loff_t i_size)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	write_seqcount_begin(&inode->i_size_seqcount);
+	inode->i_size = i_size;
+	write_seqcount_end(&inode->i_size_seqcount);
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
+	preempt_disable();
+	inode->i_size = i_size;
+	preempt_enable();
+#else
+	inode->i_size = i_size;
+#endif
+}
+
+static inline unsigned iminor(struct inode *inode)
+{
+	return MINOR(inode->i_rdev);
+}
+
+static inline unsigned imajor(struct inode *inode)
+{
+	return MAJOR(inode->i_rdev);
+}
+
+extern struct block_device *I_BDEV(struct inode *inode);
+
+struct fown_struct {
+	rwlock_t lock;          /* protects pid, uid, euid fields */
+	int pid;		/* pid or -pgrp where SIGIO should be sent */
+	uid_t uid, euid;	/* uid/euid of process setting the owner */
+	void *security;
+	int signum;		/* posix.1b rt signal to be delivered on IO */
+};
+
+/*
+ * Track a single file's readahead state
+ */
+struct file_ra_state {
+	unsigned long start;		/* Current window */
+	unsigned long size;
+	unsigned long flags;		/* ra flags RA_FLAG_xxx*/
+	unsigned long cache_hit;	/* cache hit count*/
+	unsigned long prev_page;	/* Cache last read() position */
+	unsigned long ahead_start;	/* Ahead window */
+	unsigned long ahead_size;
+	unsigned long ra_pages;		/* Maximum readahead window */
+	unsigned long mmap_hit;		/* Cache hit stat for mmap accesses */
+	unsigned long mmap_miss;	/* Cache miss stat for mmap accesses */
+};
+#define RA_FLAG_MISS 0x01	/* a cache miss occured against this file */
+#define RA_FLAG_INCACHE 0x02	/* file is already in cache */
+
+struct file {
+	struct list_head	f_list;
+	struct dentry		*f_dentry;
+	struct vfsmount         *f_vfsmnt;
+	struct file_operations	*f_op;
+	atomic_t		f_count;
+	unsigned int 		f_flags;
+	mode_t			f_mode;
+	int			f_error;
+	loff_t			f_pos;
+	struct fown_struct	f_owner;
+	unsigned int		f_uid, f_gid;
+	struct file_ra_state	f_ra;
+
+	size_t			f_maxcount;
+	unsigned long		f_version;
+	void			*f_security;
+
+	/* needed for tty driver, and maybe others */
+	void			*private_data;
+
+#ifdef CONFIG_EPOLL
+	/* Used by fs/eventpoll.c to link all the hooks to this file */
+	struct list_head	f_ep_links;
+	spinlock_t		f_ep_lock;
+#endif /* #ifdef CONFIG_EPOLL */
+	struct address_space	*f_mapping;
+};
+extern spinlock_t files_lock;
+#define file_list_lock() spin_lock(&files_lock);
+#define file_list_unlock() spin_unlock(&files_lock);
+
+#define get_file(x)	atomic_inc(&(x)->f_count)
+#define file_count(x)	atomic_read(&(x)->f_count)
+
+#define	MAX_NON_LFS	((1UL<<31) - 1)
+
+/* Page cache limit. The filesystems should put that into their s_maxbytes 
+   limits, otherwise bad things can happen in VM. */ 
+#if BITS_PER_LONG==32
+#define MAX_LFS_FILESIZE	(((u64)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1) 
+#elif BITS_PER_LONG==64
+#define MAX_LFS_FILESIZE 	0x7fffffffffffffffUL
+#endif
+
+#define FL_POSIX	1
+#define FL_FLOCK	2
+#define FL_ACCESS	8	/* not trying to lock, just looking */
+#define FL_LOCKD	16	/* lock held by rpc.lockd */
+#define FL_LEASE	32	/* lease held on this file */
+#define FL_SLEEP	128	/* A blocking lock */
+
+/*
+ * The POSIX file lock owner is determined by
+ * the "struct files_struct" in the thread group
+ * (or NULL for no owner - BSD locks).
+ *
+ * Lockd stuffs a "host" pointer into this.
+ */
+typedef struct files_struct *fl_owner_t;
+
+struct file_lock_operations {
+	void (*fl_insert)(struct file_lock *);	/* lock insertion callback */
+	void (*fl_remove)(struct file_lock *);	/* lock removal callback */
+	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
+	void (*fl_release_private)(struct file_lock *);
+};
+
+struct lock_manager_operations {
+	int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
+	void (*fl_notify)(struct file_lock *);	/* unblock callback */
+	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
+	void (*fl_release_private)(struct file_lock *);
+	void (*fl_break)(struct file_lock *);
+	int (*fl_mylease)(struct file_lock *, struct file_lock *);
+	int (*fl_change)(struct file_lock **, int);
+};
+
+/* that will die - we need it for nfs_lock_info */
+#include <linux/nfs_fs_i.h>
+
+struct file_lock {
+	struct file_lock *fl_next;	/* singly linked list for this inode  */
+	struct list_head fl_link;	/* doubly linked list of all locks */
+	struct list_head fl_block;	/* circular list of blocked processes */
+	fl_owner_t fl_owner;
+	unsigned int fl_pid;
+	wait_queue_head_t fl_wait;
+	struct file *fl_file;
+	unsigned char fl_flags;
+	unsigned char fl_type;
+	loff_t fl_start;
+	loff_t fl_end;
+
+	struct fasync_struct *	fl_fasync; /* for lease break notifications */
+	unsigned long fl_break_time;	/* for nonblocking lease breaks */
+
+	struct file_lock_operations *fl_ops;	/* Callbacks for filesystems */
+	struct lock_manager_operations *fl_lmops;	/* Callbacks for lockmanagers */
+	union {
+		struct nfs_lock_info	nfs_fl;
+	} fl_u;
+};
+
+/* The following constant reflects the upper bound of the file/locking space */
+#ifndef OFFSET_MAX
+#define INT_LIMIT(x)	(~((x)1 << (sizeof(x)*8 - 1)))
+#define OFFSET_MAX	INT_LIMIT(loff_t)
+#define OFFT_OFFSET_MAX	INT_LIMIT(off_t)
+#endif
+
+extern struct list_head file_lock_list;
+
+#include <linux/fcntl.h>
+
+extern int fcntl_getlk(struct file *, struct flock __user *);
+extern int fcntl_setlk(struct file *, unsigned int, struct flock __user *);
+
+#if BITS_PER_LONG == 32
+extern int fcntl_getlk64(struct file *, struct flock64 __user *);
+extern int fcntl_setlk64(struct file *, unsigned int, struct flock64 __user *);
+#endif
+
+extern void send_sigio(struct fown_struct *fown, int fd, int band);
+extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
+extern int fcntl_getlease(struct file *filp);
+
+/* fs/locks.c */
+extern void locks_init_lock(struct file_lock *);
+extern void locks_copy_lock(struct file_lock *, struct file_lock *);
+extern void locks_remove_posix(struct file *, fl_owner_t);
+extern void locks_remove_flock(struct file *);
+extern struct file_lock *posix_test_lock(struct file *, struct file_lock *);
+extern int posix_lock_file(struct file *, struct file_lock *);
+extern int posix_lock_file_wait(struct file *, struct file_lock *);
+extern void posix_block_lock(struct file_lock *, struct file_lock *);
+extern void posix_unblock_lock(struct file *, struct file_lock *);
+extern int posix_locks_deadlock(struct file_lock *, struct file_lock *);
+extern int flock_lock_file_wait(struct file *filp, struct file_lock *fl);
+extern int __break_lease(struct inode *inode, unsigned int flags);
+extern void lease_get_mtime(struct inode *, struct timespec *time);
+extern int setlease(struct file *, long, struct file_lock **);
+extern int lease_modify(struct file_lock **, int);
+extern int lock_may_read(struct inode *, loff_t start, unsigned long count);
+extern int lock_may_write(struct inode *, loff_t start, unsigned long count);
+extern void steal_locks(fl_owner_t from);
+
+struct fasync_struct {
+	int	magic;
+	int	fa_fd;
+	struct	fasync_struct	*fa_next; /* singly linked list */
+	struct	file 		*fa_file;
+};
+
+#define FASYNC_MAGIC 0x4601
+
+/* SMP safe fasync helpers: */
+extern int fasync_helper(int, struct file *, int, struct fasync_struct **);
+/* can be called from interrupts */
+extern void kill_fasync(struct fasync_struct **, int, int);
+/* only for net: no internal synchronization */
+extern void __kill_fasync(struct fasync_struct *, int, int);
+
+extern int f_setown(struct file *filp, unsigned long arg, int force);
+extern void f_delown(struct file *filp);
+extern int send_sigurg(struct fown_struct *fown);
+
+/*
+ *	Umount options
+ */
+
+#define MNT_FORCE	0x00000001	/* Attempt to forcibily umount */
+#define MNT_DETACH	0x00000002	/* Just detach from the tree */
+#define MNT_EXPIRE	0x00000004	/* Mark for expiry */
+
+extern struct list_head super_blocks;
+extern spinlock_t sb_lock;
+
+#define sb_entry(list)	list_entry((list), struct super_block, s_list)
+#define S_BIAS (1<<30)
+struct super_block {
+	struct list_head	s_list;		/* Keep this first */
+	dev_t			s_dev;		/* search index; _not_ kdev_t */
+	unsigned long		s_blocksize;
+	unsigned long		s_old_blocksize;
+	unsigned char		s_blocksize_bits;
+	unsigned char		s_dirt;
+	unsigned long long	s_maxbytes;	/* Max file size */
+	struct file_system_type	*s_type;
+	struct super_operations	*s_op;
+	struct dquot_operations	*dq_op;
+ 	struct quotactl_ops	*s_qcop;
+	struct export_operations *s_export_op;
+	unsigned long		s_flags;
+	unsigned long		s_magic;
+	struct dentry		*s_root;
+	struct rw_semaphore	s_umount;
+	struct semaphore	s_lock;
+	int			s_count;
+	int			s_syncing;
+	int			s_need_sync_fs;
+	atomic_t		s_active;
+	void                    *s_security;
+	struct xattr_handler	**s_xattr;
+
+	struct list_head	s_inodes;	/* all inodes */
+	struct list_head	s_dirty;	/* dirty inodes */
+	struct list_head	s_io;		/* parked for writeback */
+	struct hlist_head	s_anon;		/* anonymous dentries for (nfs) exporting */
+	struct list_head	s_files;
+
+	struct block_device	*s_bdev;
+	struct list_head	s_instances;
+	struct quota_info	s_dquot;	/* Diskquota specific options */
+
+	int			s_frozen;
+	wait_queue_head_t	s_wait_unfrozen;
+
+	char s_id[32];				/* Informational name */
+
+	void 			*s_fs_info;	/* Filesystem private info */
+
+	/*
+	 * The next field is for VFS *only*. No filesystems have any business
+	 * even looking at it. You had been warned.
+	 */
+	struct semaphore s_vfs_rename_sem;	/* Kludge */
+
+	/* Granuality of c/m/atime in ns.
+	   Cannot be worse than a second */
+	u32		   s_time_gran;
+};
+
+extern struct timespec current_fs_time(struct super_block *sb);
+
+/*
+ * Snapshotting support.
+ */
+enum {
+	SB_UNFROZEN = 0,
+	SB_FREEZE_WRITE	= 1,
+	SB_FREEZE_TRANS = 2,
+};
+
+#define vfs_check_frozen(sb, level) \
+	wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level)))
+
+/*
+ * Superblock locking.
+ */
+static inline void lock_super(struct super_block * sb)
+{
+	down(&sb->s_lock);
+}
+
+static inline void unlock_super(struct super_block * sb)
+{
+	up(&sb->s_lock);
+}
+
+/*
+ * VFS helper functions..
+ */
+extern int vfs_create(struct inode *, struct dentry *, int, struct nameidata *);
+extern int vfs_mkdir(struct inode *, struct dentry *, int);
+extern int vfs_mknod(struct inode *, struct dentry *, int, dev_t);
+extern int vfs_symlink(struct inode *, struct dentry *, const char *, int);
+extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
+extern int vfs_rmdir(struct inode *, struct dentry *);
+extern int vfs_unlink(struct inode *, struct dentry *);
+extern int vfs_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
+
+/*
+ * VFS dentry helper functions.
+ */
+extern void dentry_unhash(struct dentry *dentry);
+
+/*
+ * File types
+ *
+ * NOTE! These match bits 12..15 of stat.st_mode
+ * (ie "(i_mode >> 12) & 15").
+ */
+#define DT_UNKNOWN	0
+#define DT_FIFO		1
+#define DT_CHR		2
+#define DT_DIR		4
+#define DT_BLK		6
+#define DT_REG		8
+#define DT_LNK		10
+#define DT_SOCK		12
+#define DT_WHT		14
+
+#define OSYNC_METADATA	(1<<0)
+#define OSYNC_DATA	(1<<1)
+#define OSYNC_INODE	(1<<2)
+int generic_osync_inode(struct inode *, struct address_space *, int);
+
+/*
+ * This is the "filldir" function type, used by readdir() to let
+ * the kernel specify what kind of dirent layout it wants to have.
+ * This allows the kernel to read directories into kernel space or
+ * to have different dirent layouts depending on the binary type.
+ */
+typedef int (*filldir_t)(void *, const char *, int, loff_t, ino_t, unsigned);
+
+struct block_device_operations {
+	int (*open) (struct inode *, struct file *);
+	int (*release) (struct inode *, struct file *);
+	int (*ioctl) (struct inode *, struct file *, unsigned, unsigned long);
+	long (*compat_ioctl) (struct file *, unsigned, unsigned long);
+	int (*media_changed) (struct gendisk *);
+	int (*revalidate_disk) (struct gendisk *);
+	struct module *owner;
+};
+
+/*
+ * "descriptor" for what we're up to with a read for sendfile().
+ * This allows us to use the same read code yet
+ * have multiple different users of the data that
+ * we read from a file.
+ *
+ * The simplest case just copies the data to user
+ * mode.
+ */
+typedef struct {
+	size_t written;
+	size_t count;
+	union {
+		char __user * buf;
+		void *data;
+	} arg;
+	int error;
+} read_descriptor_t;
+
+typedef int (*read_actor_t)(read_descriptor_t *, struct page *, unsigned long, unsigned long);
+
+/* These macros are for out of kernel modules to test that
+ * the kernel supports the unlocked_ioctl and compat_ioctl
+ * fields in struct file_operations. */
+#define HAVE_COMPAT_IOCTL 1
+#define HAVE_UNLOCKED_IOCTL 1
+
+/*
+ * NOTE:
+ * read, write, poll, fsync, readv, writev, unlocked_ioctl and compat_ioctl
+ * can be called without the big kernel lock held in all filesystems.
+ */
+struct file_operations {
+	struct module *owner;
+	loff_t (*llseek) (struct file *, loff_t, int);
+	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+	ssize_t (*aio_read) (struct kiocb *, char __user *, size_t, loff_t);
+	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+	ssize_t (*aio_write) (struct kiocb *, const char __user *, size_t, loff_t);
+	int (*readdir) (struct file *, void *, filldir_t);
+	unsigned int (*poll) (struct file *, struct poll_table_struct *);
+	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
+	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
+	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
+	int (*mmap) (struct file *, struct vm_area_struct *);
+	int (*open) (struct inode *, struct file *);
+	int (*flush) (struct file *);
+	int (*release) (struct inode *, struct file *);
+	int (*fsync) (struct file *, struct dentry *, int datasync);
+	int (*aio_fsync) (struct kiocb *, int datasync);
+	int (*fasync) (int, struct file *, int);
+	int (*lock) (struct file *, int, struct file_lock *);
+	ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, loff_t *);
+	ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, loff_t *);
+	ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, void *);
+	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
+	unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+	int (*check_flags)(int);
+	int (*dir_notify)(struct file *filp, unsigned long arg);
+	int (*flock) (struct file *, int, struct file_lock *);
+};
+
+struct inode_operations {
+	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
+	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
+	int (*link) (struct dentry *,struct inode *,struct dentry *);
+	int (*unlink) (struct inode *,struct dentry *);
+	int (*symlink) (struct inode *,struct dentry *,const char *);
+	int (*mkdir) (struct inode *,struct dentry *,int);
+	int (*rmdir) (struct inode *,struct dentry *);
+	int (*mknod) (struct inode *,struct dentry *,int,dev_t);
+	int (*rename) (struct inode *, struct dentry *,
+			struct inode *, struct dentry *);
+	int (*readlink) (struct dentry *, char __user *,int);
+	int (*follow_link) (struct dentry *, struct nameidata *);
+	void (*put_link) (struct dentry *, struct nameidata *);
+	void (*truncate) (struct inode *);
+	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*setattr) (struct dentry *, struct iattr *);
+	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
+	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
+	ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
+	ssize_t (*listxattr) (struct dentry *, char *, size_t);
+	int (*removexattr) (struct dentry *, const char *);
+};
+
+struct seq_file;
+
+extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
+extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
+extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
+		unsigned long, loff_t *);
+extern ssize_t vfs_writev(struct file *, const struct iovec __user *,
+		unsigned long, loff_t *);
+
+/*
+ * NOTE: write_inode, delete_inode, clear_inode, put_inode can be called
+ * without the big kernel lock held in all filesystems.
+ */
+struct super_operations {
+   	struct inode *(*alloc_inode)(struct super_block *sb);
+	void (*destroy_inode)(struct inode *);
+
+	void (*read_inode) (struct inode *);
+  
+   	void (*dirty_inode) (struct inode *);
+	int (*write_inode) (struct inode *, int);
+	void (*put_inode) (struct inode *);
+	void (*drop_inode) (struct inode *);
+	void (*delete_inode) (struct inode *);
+	void (*put_super) (struct super_block *);
+	void (*write_super) (struct super_block *);
+	int (*sync_fs)(struct super_block *sb, int wait);
+	void (*write_super_lockfs) (struct super_block *);
+	void (*unlockfs) (struct super_block *);
+	int (*statfs) (struct super_block *, struct kstatfs *);
+	int (*remount_fs) (struct super_block *, int *, char *);
+	void (*clear_inode) (struct inode *);
+	void (*umount_begin) (struct super_block *);
+
+	int (*show_options)(struct seq_file *, struct vfsmount *);
+
+	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
+	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+};
+
+/* Inode state bits.  Protected by inode_lock. */
+#define I_DIRTY_SYNC		1 /* Not dirty enough for O_DATASYNC */
+#define I_DIRTY_DATASYNC	2 /* Data-related inode changes pending */
+#define I_DIRTY_PAGES		4 /* Data-related inode changes pending */
+#define __I_LOCK		3
+#define I_LOCK			(1 << __I_LOCK)
+#define I_FREEING		16
+#define I_CLEAR			32
+#define I_NEW			64
+
+#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
+
+extern void __mark_inode_dirty(struct inode *, int);
+static inline void mark_inode_dirty(struct inode *inode)
+{
+	__mark_inode_dirty(inode, I_DIRTY);
+}
+
+static inline void mark_inode_dirty_sync(struct inode *inode)
+{
+	__mark_inode_dirty(inode, I_DIRTY_SYNC);
+}
+
+static inline void touch_atime(struct vfsmount *mnt, struct dentry *dentry)
+{
+	/* per-mountpoint checks will go here */
+	update_atime(dentry->d_inode);
+}
+
+static inline void file_accessed(struct file *file)
+{
+	if (!(file->f_flags & O_NOATIME))
+		touch_atime(file->f_vfsmnt, file->f_dentry);
+}
+
+int sync_inode(struct inode *inode, struct writeback_control *wbc);
+
+/**
+ * &export_operations - for nfsd to communicate with file systems
+ * decode_fh:      decode a file handle fragment and return a &struct dentry
+ * encode_fh:      encode a file handle fragment from a dentry
+ * get_name:       find the name for a given inode in a given directory
+ * get_parent:     find the parent of a given directory
+ * get_dentry:     find a dentry for the inode given a file handle sub-fragment
+ *
+ * Description:
+ *    The export_operations structure provides a means for nfsd to communicate
+ *    with a particular exported file system  - particularly enabling nfsd and
+ *    the filesystem to co-operate when dealing with file handles.
+ *
+ *    export_operations contains two basic operation for dealing with file handles,
+ *    decode_fh() and encode_fh(), and allows for some other operations to be defined
+ *    which standard helper routines use to get specific information from the
+ *    filesystem.
+ *
+ *    nfsd encodes information use to determine which filesystem a filehandle
+ *    applies to in the initial part of the file handle.  The remainder, termed a
+ *    file handle fragment, is controlled completely by the filesystem.
+ *    The standard helper routines assume that this fragment will contain one or two
+ *    sub-fragments, one which identifies the file, and one which may be used to
+ *    identify the (a) directory containing the file.
+ *
+ *    In some situations, nfsd needs to get a dentry which is connected into a
+ *    specific part of the file tree.  To allow for this, it passes the function
+ *    acceptable() together with a @context which can be used to see if the dentry
+ *    is acceptable.  As there can be multiple dentrys for a given file, the filesystem
+ *    should check each one for acceptability before looking for the next.  As soon
+ *    as an acceptable one is found, it should be returned.
+ *
+ * decode_fh:
+ *    @decode_fh is given a &struct super_block (@sb), a file handle fragment (@fh, @fh_len)
+ *    and an acceptability testing function (@acceptable, @context).  It should return
+ *    a &struct dentry which refers to the same file that the file handle fragment refers
+ *    to,  and which passes the acceptability test.  If it cannot, it should return
+ *    a %NULL pointer if the file was found but no acceptable &dentries were available, or
+ *    a %ERR_PTR error code indicating why it couldn't be found (e.g. %ENOENT or %ENOMEM).
+ *
+ * encode_fh:
+ *    @encode_fh should store in the file handle fragment @fh (using at most @max_len bytes)
+ *    information that can be used by @decode_fh to recover the file refered to by the
+ *    &struct dentry @de.  If the @connectable flag is set, the encode_fh() should store
+ *    sufficient information so that a good attempt can be made to find not only
+ *    the file but also it's place in the filesystem.   This typically means storing
+ *    a reference to de->d_parent in the filehandle fragment.
+ *    encode_fh() should return the number of bytes stored or a negative error code
+ *    such as %-ENOSPC
+ *
+ * get_name:
+ *    @get_name should find a name for the given @child in the given @parent directory.
+ *    The name should be stored in the @name (with the understanding that it is already
+ *    pointing to a a %NAME_MAX+1 sized buffer.   get_name() should return %0 on success,
+ *    a negative error code or error.
+ *    @get_name will be called without @parent->i_sem held.
+ *
+ * get_parent:
+ *    @get_parent should find the parent directory for the given @child which is also
+ *    a directory.  In the event that it cannot be found, or storage space cannot be
+ *    allocated, a %ERR_PTR should be returned.
+ *
+ * get_dentry:
+ *    Given a &super_block (@sb) and a pointer to a file-system specific inode identifier,
+ *    possibly an inode number, (@inump) get_dentry() should find the identified inode and
+ *    return a dentry for that inode.
+ *    Any suitable dentry can be returned including, if necessary, a new dentry created
+ *    with d_alloc_root.  The caller can then find any other extant dentrys by following the
+ *    d_alias links.  If a new dentry was created using d_alloc_root, DCACHE_NFSD_DISCONNECTED
+ *    should be set, and the dentry should be d_rehash()ed.
+ *
+ *    If the inode cannot be found, either a %NULL pointer or an %ERR_PTR code can be returned.
+ *    The @inump will be whatever was passed to nfsd_find_fh_dentry() in either the
+ *    @obj or @parent parameters.
+ *
+ * Locking rules:
+ *  get_parent is called with child->d_inode->i_sem down
+ *  get_name is not (which is possibly inconsistent)
+ */
+
+struct export_operations {
+	struct dentry *(*decode_fh)(struct super_block *sb, __u32 *fh, int fh_len, int fh_type,
+			 int (*acceptable)(void *context, struct dentry *de),
+			 void *context);
+	int (*encode_fh)(struct dentry *de, __u32 *fh, int *max_len,
+			 int connectable);
+
+	/* the following are only called from the filesystem itself */
+	int (*get_name)(struct dentry *parent, char *name,
+			struct dentry *child);
+	struct dentry * (*get_parent)(struct dentry *child);
+	struct dentry * (*get_dentry)(struct super_block *sb, void *inump);
+
+	/* This is set by the exporting module to a standard helper */
+	struct dentry * (*find_exported_dentry)(
+		struct super_block *sb, void *obj, void *parent,
+		int (*acceptable)(void *context, struct dentry *de),
+		void *context);
+
+
+};
+
+extern struct dentry *
+find_exported_dentry(struct super_block *sb, void *obj, void *parent,
+		     int (*acceptable)(void *context, struct dentry *de),
+		     void *context);
+
+struct file_system_type {
+	const char *name;
+	int fs_flags;
+	struct super_block *(*get_sb) (struct file_system_type *, int,
+				       const char *, void *);
+	void (*kill_sb) (struct super_block *);
+	struct module *owner;
+	struct file_system_type * next;
+	struct list_head fs_supers;
+};
+
+struct super_block *get_sb_bdev(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+struct super_block *get_sb_single(struct file_system_type *fs_type,
+	int flags, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+struct super_block *get_sb_nodev(struct file_system_type *fs_type,
+	int flags, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+void generic_shutdown_super(struct super_block *sb);
+void kill_block_super(struct super_block *sb);
+void kill_anon_super(struct super_block *sb);
+void kill_litter_super(struct super_block *sb);
+void deactivate_super(struct super_block *sb);
+int set_anon_super(struct super_block *s, void *data);
+struct super_block *sget(struct file_system_type *type,
+			int (*test)(struct super_block *,void *),
+			int (*set)(struct super_block *,void *),
+			void *data);
+struct super_block *get_sb_pseudo(struct file_system_type *, char *,
+			struct super_operations *ops, unsigned long);
+int __put_super(struct super_block *sb);
+int __put_super_and_need_restart(struct super_block *sb);
+void unnamed_dev_init(void);
+
+/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
+#define fops_get(fops) \
+	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
+#define fops_put(fops) \
+	do { if (fops) module_put((fops)->owner); } while(0)
+
+extern int register_filesystem(struct file_system_type *);
+extern int unregister_filesystem(struct file_system_type *);
+extern struct vfsmount *kern_mount(struct file_system_type *);
+extern int may_umount_tree(struct vfsmount *);
+extern int may_umount(struct vfsmount *);
+extern long do_mount(char *, char *, char *, unsigned long, void *);
+
+extern int vfs_statfs(struct super_block *, struct kstatfs *);
+
+#define FLOCK_VERIFY_READ  1
+#define FLOCK_VERIFY_WRITE 2
+
+extern int locks_mandatory_locked(struct inode *);
+extern int locks_mandatory_area(int, struct inode *, struct file *, loff_t, size_t);
+
+/*
+ * Candidates for mandatory locking have the setgid bit set
+ * but no group execute bit -  an otherwise meaningless combination.
+ */
+#define MANDATORY_LOCK(inode) \
+	(IS_MANDLOCK(inode) && ((inode)->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID)
+
+static inline int locks_verify_locked(struct inode *inode)
+{
+	if (MANDATORY_LOCK(inode))
+		return locks_mandatory_locked(inode);
+	return 0;
+}
+
+extern int rw_verify_area(int, struct file *, loff_t *, size_t);
+
+static inline int locks_verify_truncate(struct inode *inode,
+				    struct file *filp,
+				    loff_t size)
+{
+	if (inode->i_flock && MANDATORY_LOCK(inode))
+		return locks_mandatory_area(
+			FLOCK_VERIFY_WRITE, inode, filp,
+			size < inode->i_size ? size : inode->i_size,
+			(size < inode->i_size ? inode->i_size - size
+			 : size - inode->i_size)
+		);
+	return 0;
+}
+
+static inline int break_lease(struct inode *inode, unsigned int mode)
+{
+	if (inode->i_flock)
+		return __break_lease(inode, mode);
+	return 0;
+}
+
+/* fs/open.c */
+
+extern int do_truncate(struct dentry *, loff_t start);
+extern struct file *filp_open(const char *, int, int);
+extern struct file * dentry_open(struct dentry *, struct vfsmount *, int);
+extern int filp_close(struct file *, fl_owner_t id);
+extern char * getname(const char __user *);
+
+/* fs/dcache.c */
+extern void __init vfs_caches_init_early(void);
+extern void __init vfs_caches_init(unsigned long);
+
+#define __getname()	kmem_cache_alloc(names_cachep, SLAB_KERNEL)
+#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
+#ifndef CONFIG_AUDITSYSCALL
+#define putname(name)   __putname(name)
+#else
+extern void putname(const char *name);
+#endif
+
+extern int register_blkdev(unsigned int, const char *);
+extern int unregister_blkdev(unsigned int, const char *);
+extern struct block_device *bdget(dev_t);
+extern void bd_set_size(struct block_device *, loff_t size);
+extern void bd_forget(struct inode *inode);
+extern void bdput(struct block_device *);
+extern struct block_device *open_by_devnum(dev_t, unsigned);
+extern struct file_operations def_blk_fops;
+extern struct address_space_operations def_blk_aops;
+extern struct file_operations def_chr_fops;
+extern struct file_operations bad_sock_fops;
+extern struct file_operations def_fifo_fops;
+extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
+extern int blkdev_ioctl(struct inode *, struct file *, unsigned, unsigned long);
+extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
+extern int blkdev_get(struct block_device *, mode_t, unsigned);
+extern int blkdev_put(struct block_device *);
+extern int bd_claim(struct block_device *, void *);
+extern void bd_release(struct block_device *);
+
+/* fs/char_dev.c */
+extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
+extern int register_chrdev_region(dev_t, unsigned, const char *);
+extern int register_chrdev(unsigned int, const char *,
+			   struct file_operations *);
+extern int unregister_chrdev(unsigned int, const char *);
+extern void unregister_chrdev_region(dev_t, unsigned);
+extern int chrdev_open(struct inode *, struct file *);
+
+/* fs/block_dev.c */
+#define BDEVNAME_SIZE	32	/* Largest string for a blockdev identifier */
+extern const char *__bdevname(dev_t, char *buffer);
+extern const char *bdevname(struct block_device *bdev, char *buffer);
+extern struct block_device *lookup_bdev(const char *);
+extern struct block_device *open_bdev_excl(const char *, int, void *);
+extern void close_bdev_excl(struct block_device *);
+
+extern void init_special_inode(struct inode *, umode_t, dev_t);
+
+/* Invalid inode operations -- fs/bad_inode.c */
+extern void make_bad_inode(struct inode *);
+extern int is_bad_inode(struct inode *);
+
+extern struct file_operations read_fifo_fops;
+extern struct file_operations write_fifo_fops;
+extern struct file_operations rdwr_fifo_fops;
+extern struct file_operations read_pipe_fops;
+extern struct file_operations write_pipe_fops;
+extern struct file_operations rdwr_pipe_fops;
+
+extern int fs_may_remount_ro(struct super_block *);
+
+/*
+ * return READ, READA, or WRITE
+ */
+#define bio_rw(bio)		((bio)->bi_rw & (RW_MASK | RWA_MASK))
+
+/*
+ * return data direction, READ or WRITE
+ */
+#define bio_data_dir(bio)	((bio)->bi_rw & 1)
+
+extern int check_disk_change(struct block_device *);
+extern int invalidate_inodes(struct super_block *);
+extern int __invalidate_device(struct block_device *, int);
+extern int invalidate_partition(struct gendisk *, int);
+unsigned long invalidate_mapping_pages(struct address_space *mapping,
+					pgoff_t start, pgoff_t end);
+unsigned long invalidate_inode_pages(struct address_space *mapping);
+static inline void invalidate_remote_inode(struct inode *inode)
+{
+	if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+	    S_ISLNK(inode->i_mode))
+		invalidate_inode_pages(inode->i_mapping);
+}
+extern int invalidate_inode_pages2(struct address_space *mapping);
+extern int invalidate_inode_pages2_range(struct address_space *mapping,
+					 pgoff_t start, pgoff_t end);
+extern int write_inode_now(struct inode *, int);
+extern int filemap_fdatawrite(struct address_space *);
+extern int filemap_flush(struct address_space *);
+extern int filemap_fdatawait(struct address_space *);
+extern int filemap_write_and_wait(struct address_space *mapping);
+extern int filemap_write_and_wait_range(struct address_space *mapping,
+				        loff_t lstart, loff_t lend);
+extern void sync_supers(void);
+extern void sync_filesystems(int wait);
+extern void emergency_sync(void);
+extern void emergency_remount(void);
+extern int do_remount_sb(struct super_block *sb, int flags,
+			 void *data, int force);
+extern sector_t bmap(struct inode *, sector_t);
+extern int setattr_mask(unsigned int);
+extern int notify_change(struct dentry *, struct iattr *);
+extern int permission(struct inode *, int, struct nameidata *);
+extern int generic_permission(struct inode *, int,
+		int (*check_acl)(struct inode *, int));
+
+extern int get_write_access(struct inode *);
+extern int deny_write_access(struct file *);
+static inline void put_write_access(struct inode * inode)
+{
+	atomic_dec(&inode->i_writecount);
+}
+static inline void allow_write_access(struct file *file)
+{
+	if (file)
+		atomic_inc(&file->f_dentry->d_inode->i_writecount);
+}
+extern int do_pipe(int *);
+
+extern int open_namei(const char *, int, int, struct nameidata *);
+extern int may_open(struct nameidata *, int, int);
+
+extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern struct file * open_exec(const char *);
+ 
+/* fs/dcache.c -- generic fs support functions */
+extern int is_subdir(struct dentry *, struct dentry *);
+extern ino_t find_inode_number(struct dentry *, struct qstr *);
+
+#include <linux/err.h>
+
+/* needed for stackable file system support */
+extern loff_t default_llseek(struct file *file, loff_t offset, int origin);
+
+extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
+
+extern void inode_init_once(struct inode *);
+extern void iput(struct inode *);
+extern struct inode * igrab(struct inode *);
+extern ino_t iunique(struct super_block *, ino_t);
+extern int inode_needs_sync(struct inode *inode);
+extern void generic_delete_inode(struct inode *inode);
+
+extern struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
+		int (*test)(struct inode *, void *), void *data);
+extern struct inode *ilookup(struct super_block *sb, unsigned long ino);
+
+extern struct inode * iget5_locked(struct super_block *, unsigned long, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *);
+extern struct inode * iget_locked(struct super_block *, unsigned long);
+extern void unlock_new_inode(struct inode *);
+
+static inline struct inode *iget(struct super_block *sb, unsigned long ino)
+{
+	struct inode *inode = iget_locked(sb, ino);
+	
+	if (inode && (inode->i_state & I_NEW)) {
+		sb->s_op->read_inode(inode);
+		unlock_new_inode(inode);
+	}
+
+	return inode;
+}
+
+extern void __iget(struct inode * inode);
+extern void clear_inode(struct inode *);
+extern void destroy_inode(struct inode *);
+extern struct inode *new_inode(struct super_block *);
+extern int remove_suid(struct dentry *);
+extern void remove_dquot_ref(struct super_block *, int, struct list_head *);
+extern struct semaphore iprune_sem;
+
+extern void __insert_inode_hash(struct inode *, unsigned long hashval);
+extern void remove_inode_hash(struct inode *);
+static inline void insert_inode_hash(struct inode *inode) {
+	__insert_inode_hash(inode, inode->i_ino);
+}
+
+extern struct file * get_empty_filp(void);
+extern void file_move(struct file *f, struct list_head *list);
+extern void file_kill(struct file *f);
+struct bio;
+extern void submit_bio(int, struct bio *);
+extern int bdev_read_only(struct block_device *);
+extern int set_blocksize(struct block_device *, int);
+extern int sb_set_blocksize(struct super_block *, int);
+extern int sb_min_blocksize(struct super_block *, int);
+
+extern int generic_file_mmap(struct file *, struct vm_area_struct *);
+extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
+extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
+extern int file_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
+extern ssize_t generic_file_read(struct file *, char __user *, size_t, loff_t *);
+int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk);
+extern ssize_t generic_file_write(struct file *, const char __user *, size_t, loff_t *);
+extern ssize_t generic_file_aio_read(struct kiocb *, char __user *, size_t, loff_t);
+extern ssize_t __generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t *);
+extern ssize_t generic_file_aio_write(struct kiocb *, const char __user *, size_t, loff_t);
+extern ssize_t generic_file_aio_write_nolock(struct kiocb *, const struct iovec *,
+		unsigned long, loff_t *);
+extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *,
+		unsigned long *, loff_t, loff_t *, size_t, size_t);
+extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *,
+		unsigned long, loff_t, loff_t *, size_t, ssize_t);
+extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos);
+extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
+ssize_t generic_file_write_nolock(struct file *file, const struct iovec *iov,
+				unsigned long nr_segs, loff_t *ppos);
+extern ssize_t generic_file_sendfile(struct file *, loff_t *, size_t, read_actor_t, void *);
+extern void do_generic_mapping_read(struct address_space *mapping,
+				    struct file_ra_state *, struct file *,
+				    loff_t *, read_descriptor_t *, read_actor_t);
+extern void
+file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
+extern ssize_t generic_file_direct_IO(int rw, struct kiocb *iocb,
+	const struct iovec *iov, loff_t offset, unsigned long nr_segs);
+extern ssize_t generic_file_readv(struct file *filp, const struct iovec *iov, 
+	unsigned long nr_segs, loff_t *ppos);
+ssize_t generic_file_writev(struct file *filp, const struct iovec *iov, 
+			unsigned long nr_segs, loff_t *ppos);
+extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t remote_llseek(struct file *file, loff_t offset, int origin);
+extern int generic_file_open(struct inode * inode, struct file * filp);
+extern int nonseekable_open(struct inode * inode, struct file * filp);
+
+static inline void do_generic_file_read(struct file * filp, loff_t *ppos,
+					read_descriptor_t * desc,
+					read_actor_t actor)
+{
+	do_generic_mapping_read(filp->f_mapping,
+				&filp->f_ra,
+				filp,
+				ppos,
+				desc,
+				actor);
+}
+
+ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+	struct block_device *bdev, const struct iovec *iov, loff_t offset,
+	unsigned long nr_segs, get_blocks_t get_blocks, dio_iodone_t end_io,
+	int lock_type);
+
+enum {
+	DIO_LOCKING = 1, /* need locking between buffered and direct access */
+	DIO_NO_LOCKING,  /* bdev; no locking at all between buffered/direct */
+	DIO_OWN_LOCKING, /* filesystem locks buffered and direct internally */
+};
+
+static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
+	struct inode *inode, struct block_device *bdev, const struct iovec *iov,
+	loff_t offset, unsigned long nr_segs, get_blocks_t get_blocks,
+	dio_iodone_t end_io)
+{
+	return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
+				nr_segs, get_blocks, end_io, DIO_LOCKING);
+}
+
+static inline ssize_t blockdev_direct_IO_no_locking(int rw, struct kiocb *iocb,
+	struct inode *inode, struct block_device *bdev, const struct iovec *iov,
+	loff_t offset, unsigned long nr_segs, get_blocks_t get_blocks,
+	dio_iodone_t end_io)
+{
+	return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
+				nr_segs, get_blocks, end_io, DIO_NO_LOCKING);
+}
+
+static inline ssize_t blockdev_direct_IO_own_locking(int rw, struct kiocb *iocb,
+	struct inode *inode, struct block_device *bdev, const struct iovec *iov,
+	loff_t offset, unsigned long nr_segs, get_blocks_t get_blocks,
+	dio_iodone_t end_io)
+{
+	return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
+				nr_segs, get_blocks, end_io, DIO_OWN_LOCKING);
+}
+
+extern struct file_operations generic_ro_fops;
+
+#define special_file(m) (S_ISCHR(m)||S_ISBLK(m)||S_ISFIFO(m)||S_ISSOCK(m))
+
+extern int vfs_readlink(struct dentry *, char __user *, int, const char *);
+extern int vfs_follow_link(struct nameidata *, const char *);
+extern int page_readlink(struct dentry *, char __user *, int);
+extern int page_follow_link_light(struct dentry *, struct nameidata *);
+extern void page_put_link(struct dentry *, struct nameidata *);
+extern int page_symlink(struct inode *inode, const char *symname, int len);
+extern struct inode_operations page_symlink_inode_operations;
+extern int generic_readlink(struct dentry *, char __user *, int);
+extern void generic_fillattr(struct inode *, struct kstat *);
+extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+void inode_add_bytes(struct inode *inode, loff_t bytes);
+void inode_sub_bytes(struct inode *inode, loff_t bytes);
+loff_t inode_get_bytes(struct inode *inode);
+void inode_set_bytes(struct inode *inode, loff_t bytes);
+
+extern int vfs_readdir(struct file *, filldir_t, void *);
+
+extern int vfs_stat(char __user *, struct kstat *);
+extern int vfs_lstat(char __user *, struct kstat *);
+extern int vfs_fstat(unsigned int, struct kstat *);
+
+extern int vfs_ioctl(struct file *, unsigned int, unsigned int, unsigned long);
+
+extern struct file_system_type *get_fs_type(const char *name);
+extern struct super_block *get_super(struct block_device *);
+extern struct super_block *user_get_super(dev_t);
+extern void drop_super(struct super_block *sb);
+
+extern int dcache_dir_open(struct inode *, struct file *);
+extern int dcache_dir_close(struct inode *, struct file *);
+extern loff_t dcache_dir_lseek(struct file *, loff_t, int);
+extern int dcache_readdir(struct file *, void *, filldir_t);
+extern int simple_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+extern int simple_statfs(struct super_block *, struct kstatfs *);
+extern int simple_link(struct dentry *, struct inode *, struct dentry *);
+extern int simple_unlink(struct inode *, struct dentry *);
+extern int simple_rmdir(struct inode *, struct dentry *);
+extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
+extern int simple_sync_file(struct file *, struct dentry *, int);
+extern int simple_empty(struct dentry *);
+extern int simple_readpage(struct file *file, struct page *page);
+extern int simple_prepare_write(struct file *file, struct page *page,
+			unsigned offset, unsigned to);
+extern int simple_commit_write(struct file *file, struct page *page,
+				unsigned offset, unsigned to);
+
+extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *);
+extern struct file_operations simple_dir_operations;
+extern struct inode_operations simple_dir_inode_operations;
+struct tree_descr { char *name; struct file_operations *ops; int mode; };
+struct dentry *d_alloc_name(struct dentry *, const char *);
+extern int simple_fill_super(struct super_block *, int, struct tree_descr *);
+extern int simple_pin_fs(char *name, struct vfsmount **mount, int *count);
+extern void simple_release_fs(struct vfsmount **mount, int *count);
+
+extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+
+extern int inode_change_ok(struct inode *, struct iattr *);
+extern int __must_check inode_setattr(struct inode *, struct iattr *);
+
+extern void inode_update_time(struct inode *inode, int ctime_too);
+
+static inline ino_t parent_ino(struct dentry *dentry)
+{
+	ino_t res;
+
+	spin_lock(&dentry->d_lock);
+	res = dentry->d_parent->d_inode->i_ino;
+	spin_unlock(&dentry->d_lock);
+	return res;
+}
+
+/* kernel/fork.c */
+extern int unshare_files(void);
+
+/* Transaction based IO helpers */
+
+/*
+ * An argresp is stored in an allocated page and holds the
+ * size of the argument or response, along with its content
+ */
+struct simple_transaction_argresp {
+	ssize_t size;
+	char data[0];
+};
+
+#define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))
+
+char *simple_transaction_get(struct file *file, const char __user *buf,
+				size_t size);
+ssize_t simple_transaction_read(struct file *file, char __user *buf,
+				size_t size, loff_t *pos);
+int simple_transaction_release(struct inode *inode, struct file *file);
+
+static inline void simple_transaction_set(struct file *file, size_t n)
+{
+	struct simple_transaction_argresp *ar = file->private_data;
+
+	BUG_ON(n > SIMPLE_TRANSACTION_LIMIT);
+
+	/*
+	 * The barrier ensures that ar->size will really remain zero until
+	 * ar->data is ready for reading.
+	 */
+	smp_mb();
+	ar->size = n;
+}
+
+#ifdef CONFIG_SECURITY
+static inline char *alloc_secdata(void)
+{
+	return (char *)get_zeroed_page(GFP_KERNEL);
+}
+
+static inline void free_secdata(void *secdata)
+{
+	free_page((unsigned long)secdata);
+}
+#else
+static inline char *alloc_secdata(void)
+{
+	return (char *)1;
+}
+
+static inline void free_secdata(void *secdata)
+{ }
+#endif	/* CONFIG_SECURITY */
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_FS_H */
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
new file mode 100644
index 000000000000..c623d12a486e
--- /dev/null
+++ b/include/linux/fs_struct.h
@@ -0,0 +1,28 @@
+#ifndef _LINUX_FS_STRUCT_H
+#define _LINUX_FS_STRUCT_H
+
+struct dentry;
+struct vfsmount;
+
+struct fs_struct {
+	atomic_t count;
+	rwlock_t lock;
+	int umask;
+	struct dentry * root, * pwd, * altroot;
+	struct vfsmount * rootmnt, * pwdmnt, * altrootmnt;
+};
+
+#define INIT_FS {				\
+	.count		= ATOMIC_INIT(1),	\
+	.lock		= RW_LOCK_UNLOCKED,	\
+	.umask		= 0022, \
+}
+
+extern void exit_fs(struct task_struct *);
+extern void set_fs_altroot(void);
+extern void set_fs_root(struct fs_struct *, struct vfsmount *, struct dentry *);
+extern void set_fs_pwd(struct fs_struct *, struct vfsmount *, struct dentry *);
+extern struct fs_struct *copy_fs_struct(struct fs_struct *);
+extern void put_fs_struct(struct fs_struct *);
+
+#endif /* _LINUX_FS_STRUCT_H */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
new file mode 100644
index 000000000000..faaff4c64559
--- /dev/null
+++ b/include/linux/fsl_devices.h
@@ -0,0 +1,78 @@
+/*
+ * include/linux/fsl_devices.h
+ *
+ * Definitions for any platform device related flags or structures for
+ * Freescale processor devices
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef _FSL_DEVICE_H_
+#define _FSL_DEVICE_H_
+
+#include <linux/types.h>
+
+/*
+ * Some conventions on how we handle peripherals on Freescale chips
+ *
+ * unique device: a platform_device entry in fsl_plat_devs[] plus
+ * associated device information in its platform_data structure.
+ *
+ * A chip is described by a set of unique devices.
+ *
+ * Each sub-arch has its own master list of unique devices and
+ * enumerates them by enum fsl_devices in a sub-arch specific header
+ *
+ * The platform data structure is broken into two parts.  The
+ * first is device specific information that help identify any
+ * unique features of a peripheral.  The second is any
+ * information that may be defined by the board or how the device
+ * is connected externally of the chip.
+ *
+ * naming conventions:
+ * - platform data structures: <driver>_platform_data
+ * - platform data device flags: FSL_<driver>_DEV_<FLAG>
+ * - platform data board flags: FSL_<driver>_BRD_<FLAG>
+ *
+ */
+
+struct gianfar_platform_data {
+	/* device specific information */
+	u32 device_flags;
+	u32 phy_reg_addr;
+
+	/* board specific information */
+	u32 board_flags;
+	u32 phyid;
+	u32 interruptPHY;
+	u8 mac_addr[6];
+};
+
+/* Flags related to gianfar device features */
+#define FSL_GIANFAR_DEV_HAS_GIGABIT		0x00000001
+#define FSL_GIANFAR_DEV_HAS_COALESCE		0x00000002
+#define FSL_GIANFAR_DEV_HAS_RMON		0x00000004
+#define FSL_GIANFAR_DEV_HAS_MULTI_INTR		0x00000008
+
+/* Flags in gianfar_platform_data */
+#define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001	/* if not set use a timer */
+
+struct fsl_i2c_platform_data {
+	/* device specific information */
+	u32 device_flags;
+};
+
+/* Flags related to I2C device features */
+#define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
+#define FSL_I2C_DEV_CLOCK_5200		0x00000002
+
+#endif				/* _FSL_DEVICE_H_ */
+#endif				/* __KERNEL__ */
diff --git a/include/linux/ftape-header-segment.h b/include/linux/ftape-header-segment.h
new file mode 100644
index 000000000000..4732218f0708
--- /dev/null
+++ b/include/linux/ftape-header-segment.h
@@ -0,0 +1,122 @@
+#ifndef _FTAPE_HEADER_SEGMENT_H
+#define _FTAPE_HEADER_SEGMENT_H
+
+/*
+ * Copyright (C) 1996-1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/ftape-header-segment.h,v $
+ * $Revision: 1.2 $
+ * $Date: 1997/10/05 19:19:28 $
+ *
+ *      This file defines some offsets into the header segment of a
+ *      floppy tape cartridge.  For use with the QIC-40/80/3010/3020
+ *      floppy-tape driver "ftape" for Linux.
+ */
+
+#define FT_SIGNATURE   0  /* must be 0xaa55aa55 */
+#define FT_FMT_CODE    4
+#define FT_REV_LEVEL   5  /* only for QIC-80 since. Rev. L (== 0x0c)         */
+#define FT_HSEG_1      6  /* first header segment, except for format code  6 */
+#define FT_HSEG_2      8  /* second header segment, except for format code 6 */
+#define FT_FRST_SEG   10  /* first data segment, except for format code 6    */
+#define FT_LAST_SEG   12  /* last data segment, except for format code 6     */
+#define FT_FMT_DATE   14  /* date and time of most recent format, see below  */
+#define FT_WR_DATE    18  /* date and time of most recent write or format    */
+#define FT_SPT        24  /* segments per track                              */
+#define FT_TPC        26  /* tracks per cartridge                            */
+#define FT_FHM        27  /* floppy drive head (maximum of it)               */
+#define FT_FTM        28  /* floppy track max.                               */
+#define FT_FSM        29  /* floppy sector max. (128)                        */
+#define FT_LABEL      30  /* floppy tape label                               */
+#define FT_LABEL_DATE 74  /* date and time the tape label was written        */
+#define FT_LABEL_SZ   (FT_LABEL_DATE - FT_LABEL)
+#define FT_CMAP_START 78  /* starting segment of compression map             */
+#define FT_FMT_ERROR 128  /* must be set to 0xff if remainder gets lost during
+			   * tape format
+			   */
+#define FT_SEG_CNT   130  /* number of seg. written, formatted or verified
+			   * through lifetime of tape (why not read?)
+			   */
+#define FT_INIT_DATE 138  /* date and time of initial tape format    */
+#define FT_FMT_CNT   142  /* number of times tape has been formatted */
+#define FT_FSL_CNT   144  /* number of segments in failed sector log */
+#define FT_MK_CODE   146  /* id string of tape manufacturer          */
+#define FT_LOT_CODE  190  /* tape manufacturer lot code              */
+#define FT_6_HSEG_1  234  /* first header segment for format code  6 */
+#define FT_6_HSEG_2  238  /* second header segment for format code 6 */
+#define FT_6_FRST_SEG 242 /* first data segment for format code 6    */
+#define FT_6_LAST_SEG 246 /* last data segment for format code 6     */
+
+#define FT_FSL        256
+#define FT_HEADER_END 256 /* space beyond this point:
+			   * format codes 2, 3 and 5: 
+			   * -  failed sector log until byte 2047
+			   * -  bad sector map in the reamining part of segment
+			   * format codes 4 and 6:
+			   * -  bad sector map  starts hear
+			   */
+
+
+/*  value to be stored at the FT_SIGNATURE offset 
+ */
+#define FT_HSEG_MAGIC 0xaa55aa55
+#define FT_D2G_MAGIC  0x82288228 /* Ditto 2GB */
+
+/* data and time encoding: */
+#define FT_YEAR_SHIFT 25
+#define FT_YEAR_MASK  0xfe000000
+#define FT_YEAR_0     1970
+#define FT_YEAR_MAX   127
+#define FT_YEAR(year) ((((year)-FT_YEAR_0)<<FT_YEAR_SHIFT)&FT_YEAR_MASK)
+
+#define FT_TIME_SHIFT   0
+#define FT_TIME_MASK    0x01FFFFFF
+#define FT_TIME_MAX     0x01ea6dff /* last second of a year */
+#define FT_TIME(mo,d,h,m,s) \
+	((((s)+60*((m)+60*((h)+24*((d)+31*(mo))))) & FT_TIME_MASK))
+
+#define FT_TIME_STAMP(y,mo,d,h,m,s) (FT_YEAR(y) | FT_TIME(mo,d,h,m,s))
+
+/* values for the format code field */
+typedef enum {
+	fmt_normal = 2, /*  QIC-80 post Rev. B 205Ft or 307Ft tape    */
+	fmt_1100ft = 3, /*  QIC-80 post Rev. B 1100Ft tape            */
+	fmt_var    = 4, /*  QIC-80 post Rev. B variabel length format */
+	fmt_425ft  = 5, /*  QIC-80 post Rev. B 425Ft tape             */
+	fmt_big    = 6  /*  QIC-3010/3020 variable length tape with more 
+			 *  than 2^16 segments per tape
+			 */
+} ft_format_type;
+
+/* definitions for the failed sector log */
+#define FT_FSL_SIZE        (2 * FT_SECTOR_SIZE - FT_HEADER_END)
+#define FT_FSL_MAX_ENTRIES (FT_FSL_SIZE/sizeof(__u32))
+
+typedef struct ft_fsl_entry {
+	__u16 segment;
+	__u16 date;
+} __attribute__ ((packed)) ft_fsl_entry;
+
+
+/*  date encoding for the failed sector log 
+ *  month: 1..12, day: 1..31, year: 1970..2097
+ */
+#define FT_FSL_TIME_STAMP(y,m,d) \
+	(((((y) - FT_YEAR_0)<<9)&0xfe00) | (((m)<<5)&0x01e0) | ((d)&0x001f))
+
+#endif /* _FTAPE_HEADER_SEGMENT_H */
diff --git a/include/linux/ftape-vendors.h b/include/linux/ftape-vendors.h
new file mode 100644
index 000000000000..ec1a81f059e5
--- /dev/null
+++ b/include/linux/ftape-vendors.h
@@ -0,0 +1,137 @@
+#ifndef _FTAPE_VENDORS_H
+#define _FTAPE_VENDORS_H
+
+/*
+ *      Copyright (C) 1993-1996 Bas Laarhoven,
+ *                (C) 1996-1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/ftape-vendors.h,v $
+ * $Revision: 1.6 $
+ * $Date: 1997/10/09 15:38:11 $
+ *
+ *      This file contains the supported drive types with their
+ *      QIC-117 spec. vendor code and drive dependent configuration
+ *      information.
+ */
+
+typedef enum {
+	unknown_wake_up = 0,
+	no_wake_up,
+	wake_up_colorado,
+	wake_up_mountain,
+	wake_up_insight,
+} wake_up_types;
+
+typedef struct {
+	wake_up_types wake_up;	/* see wake_up_types */
+	char *name;		/* Text describing the drive */
+} wakeup_method;
+
+/*  Note: order of entries in WAKEUP_METHODS must be so that a variable
+ *        of type wake_up_types can be used as an index in the array.
+ */
+#define WAKEUP_METHODS { \
+  { unknown_wake_up,    "Unknown" }, \
+  { no_wake_up,         "None" }, \
+  { wake_up_colorado,   "Colorado" }, \
+  { wake_up_mountain,   "Mountain" }, \
+  { wake_up_insight,    "Motor-on" }, \
+}
+
+typedef struct {
+	unsigned int vendor_id;	/* vendor id from drive */
+	int speed;		/* maximum tape transport speed (ips) */
+	wake_up_types wake_up;	/* see wake_up_types */
+	char *name;		/* Text describing the drive */
+} vendor_struct;
+
+#define UNKNOWN_VENDOR (-1)
+
+#define QIC117_VENDORS {						    \
+/* see _vendor_struct */						    \
+  { 0x00000,  82, wake_up_colorado,  "Colorado DJ-10 (old)" },		    \
+  { 0x00047,  90, wake_up_colorado,  "Colorado DJ-10/DJ-20" },		    \
+  { 0x011c2,  84, wake_up_colorado,  "Colorado 700" },			    \
+  { 0x011c3,  90, wake_up_colorado,  "Colorado 1400" },			    \
+  { 0x011c4,  84, wake_up_colorado,  "Colorado DJ-10/DJ-20 (new)" },	    \
+  { 0x011c5,  84, wake_up_colorado,  "HP Colorado T1000" },		    \
+  { 0x011c6,  90, wake_up_colorado,  "HP Colorado T3000" },		    \
+  { 0x00005,  45, wake_up_mountain,  "Archive 5580i" },			    \
+  { 0x10005,  50, wake_up_insight,   "Insight 80Mb, Irwin 80SX" },	    \
+  { 0x00140,  74, wake_up_mountain,  "Archive S.Hornet [Identity/Escom]" }, \
+  { 0x00146,  72, wake_up_mountain,  "Archive 31250Q [Escom]" },	    \
+  { 0x0014a, 100, wake_up_mountain,  "Archive XL9250i [Conner/Escom]" },    \
+  { 0x0014c,  98, wake_up_mountain,  "Conner C250MQT" },		    \
+  { 0x0014e,  80, wake_up_mountain,  "Conner C250MQ" },			    \
+  { 0x00150,  80, wake_up_mountain,  "Conner TSM420R/TST800R" },	    \
+  { 0x00152,  80, wake_up_mountain,  "Conner TSM850R" },		    \
+  { 0x00156,  80, wake_up_mountain,  "Conner TSM850R/1700R/TST3200R" },	    \
+  { 0x00180,   0, wake_up_mountain,  "Summit SE 150" },			    \
+  { 0x00181,  85, wake_up_mountain,  "Summit SE 250, Mountain FS8000" },    \
+  { 0x001c1,  82, no_wake_up,        "Wangtek 3040F" },			    \
+  { 0x001c8,  64, no_wake_up,        "Wangtek 3080F" },			    \
+  { 0x001c8,  64, wake_up_colorado,  "Wangtek 3080F" },			    \
+  { 0x001ca,  67, no_wake_up,        "Wangtek 3080F (new)" },		    \
+  { 0x001cc,  77, wake_up_colorado,  "Wangtek 3200 / Teac 700" },	    \
+  { 0x001cd,  75, wake_up_colorado,  "Reveal TB1400" },			    \
+  { 0x00380,  85, wake_up_colorado,  "Exabyte Eagle-96" },		    \
+  { 0x00381,  85, wake_up_colorado,  "Exabyte Eagle TR-3" },		    \
+  { 0x00382,  85, wake_up_colorado,  "Exabyte Eagle TR-3" },		    \
+  { 0x003ce,  77, wake_up_colorado,  "Teac 800" },			    \
+  { 0x003cf,   0, wake_up_colorado,  "Teac FT3010TR" },			    \
+  { 0x08880,  64, no_wake_up,        "Iomega 250, Ditto 800" },		    \
+  { 0x08880,  64, wake_up_colorado,  "Iomega 250, Ditto 800" },		    \
+  { 0x08880,  64, wake_up_insight,   "Iomega 250, Ditto 800" },		    \
+  { 0x08881,  80, wake_up_colorado,  "Iomega 700" },			    \
+  { 0x08882,  80, wake_up_colorado,  "Iomega 3200" },			    \
+  { 0x08883,  80, wake_up_colorado,  "Iomega DITTO 2GB" },		    \
+  { 0x00021,  70, no_wake_up,        "AIWA CT-803" },			    \
+  { 0x004c0,  80, no_wake_up,        "AIWA TD-S1600" },			    \
+  { 0x00021,   0, wake_up_mountain,  "COREtape QIC80" },		    \
+  { 0x00441,   0, wake_up_mountain,  "ComByte DoublePlay" },		    \
+  { 0x00481, 127, wake_up_mountain,  "PERTEC MyTape 800" },		    \
+  { 0x00483, 130, wake_up_mountain,  "PERTEC MyTape 3200" },		    \
+  { UNKNOWN_VENDOR, 0, no_wake_up, "unknown" }				    \
+}
+
+#define QIC117_MAKE_CODES {			\
+  { 0, "Unassigned" },				\
+  { 1, "Alloy Computer Products" },		\
+  { 2, "3M" },					\
+  { 3, "Tandberg Data" },			\
+  { 4, "Colorado" },				\
+  { 5, "Archive/Conner" },			\
+  { 6, "Mountain/Summit Memory Systems" },	\
+  { 7, "Wangtek/Rexon/Tecmar" },		\
+  { 8, "Sony" },				\
+  { 9, "Cipher Data Products" },		\
+  { 10, "Irwin Magnetic Systems" },		\
+  { 11, "Braemar" },				\
+  { 12, "Verbatim" },				\
+  { 13, "Core International" },			\
+  { 14, "Exabyte" },				\
+  { 15, "Teac" },				\
+  { 16, "Gigatek" },				\
+  { 17, "ComByte" },				\
+  { 18, "PERTEC Memories" },			\
+  { 19, "Aiwa" },				\
+  { 71, "Colorado" },				\
+  { 546, "Iomega Inc" },			\
+}
+
+#endif /* _FTAPE_VENDORS_H */
diff --git a/include/linux/ftape.h b/include/linux/ftape.h
new file mode 100644
index 000000000000..c6b38d5b9186
--- /dev/null
+++ b/include/linux/ftape.h
@@ -0,0 +1,202 @@
+#ifndef _FTAPE_H
+#define _FTAPE_H
+
+/*
+ * Copyright (C) 1994-1996 Bas Laarhoven,
+ *           (C) 1996-1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/ftape.h,v $
+ * $Revision: 1.17.6.4 $
+ * $Date: 1997/11/25 01:52:54 $
+ *
+ *      This file contains global definitions, typedefs and macro's
+ *      for the QIC-40/80/3010/3020 floppy-tape driver for Linux.
+ */
+
+#define FTAPE_VERSION "ftape v3.04d 25/11/97"
+
+#ifdef __KERNEL__
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#endif
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/mtio.h>
+
+#define FT_SECTOR(x)		(x+1)	/* sector offset into real sector */
+#define FT_SECTOR_SIZE		1024
+#define FT_SECTORS_PER_SEGMENT	  32
+#define FT_ECC_SECTORS		   3
+#define FT_SEGMENT_SIZE		((FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS) * FT_SECTOR_SIZE)
+#define FT_BUFF_SIZE    (FT_SECTORS_PER_SEGMENT * FT_SECTOR_SIZE)
+
+/*
+ *   bits of the minor device number that define drive selection
+ *   methods. Could be used one day to access multiple tape
+ *   drives on the same controller.
+ */
+#define FTAPE_SEL_A     0
+#define FTAPE_SEL_B     1
+#define FTAPE_SEL_C     2
+#define FTAPE_SEL_D     3
+#define FTAPE_SEL_MASK     3
+#define FTAPE_SEL(unit) ((unit) & FTAPE_SEL_MASK)
+#define FTAPE_NO_REWIND 4	/* mask for minor nr */
+
+/* the following two may be reported when MTIOCGET is requested ... */
+typedef union {
+	struct {
+		__u8 error;
+		__u8 command;
+	} error;
+	long space;
+} ft_drive_error;
+typedef union {
+	struct {
+		__u8 drive_status;
+		__u8 drive_config;
+		__u8 tape_status;
+	} status;
+	long space;
+} ft_drive_status;
+
+#ifdef __KERNEL__
+
+#define FT_RQM_DELAY    12
+#define FT_MILLISECOND  1
+#define FT_SECOND       1000
+#define FT_FOREVER      -1
+#ifndef HZ
+#error "HZ undefined."
+#endif
+#define FT_USPT         (1000000/HZ) /* microseconds per tick */
+
+/* This defines the number of retries that the driver will allow
+ * before giving up (and letting a higher level handle the error).
+ */
+#ifdef TESTING
+#define FT_SOFT_RETRIES 1	   /* number of low level retries */
+#define FT_RETRIES_ON_ECC_ERROR 3  /* ecc error when correcting segment */
+#else
+#define FT_SOFT_RETRIES 6	   /* number of low level retries (triple) */
+#define FT_RETRIES_ON_ECC_ERROR 3  /* ecc error when correcting segment */
+#endif
+
+#ifndef THE_FTAPE_MAINTAINER
+#define THE_FTAPE_MAINTAINER "the ftape maintainer"
+#endif
+
+/* Initialize missing configuration parameters.
+ */
+#ifndef CONFIG_FT_NR_BUFFERS
+# define CONFIG_FT_NR_BUFFERS 3
+#endif
+#ifndef CONFIG_FT_FDC_THR
+# define CONFIG_FT_FDC_THR 8
+#endif
+#ifndef CONFIG_FT_FDC_MAX_RATE
+# define CONFIG_FT_FDC_MAX_RATE 2000
+#endif
+#ifndef CONFIG_FT_FDC_BASE
+# define CONFIG_FT_FDC_BASE 0
+#endif
+#ifndef CONFIG_FT_FDC_IRQ
+# define CONFIG_FT_FDC_IRQ  0
+#endif
+#ifndef CONFIG_FT_FDC_DMA
+# define CONFIG_FT_FDC_DMA  0
+#endif
+
+/* Turn some booleans into numbers.
+ */
+#ifdef CONFIG_FT_PROBE_FC10
+# undef CONFIG_FT_PROBE_FC10
+# define CONFIG_FT_PROBE_FC10 1
+#else
+# define CONFIG_FT_PROBE_FC10 0
+#endif
+#ifdef CONFIG_FT_MACH2
+# undef CONFIG_FT_MACH2
+# define CONFIG_FT_MACH2 1
+#else
+# define CONFIG_FT_MACH2 0
+#endif
+
+/* Insert default settings
+ */
+#if CONFIG_FT_PROBE_FC10 == 1
+# if CONFIG_FT_FDC_BASE == 0
+#  undef  CONFIG_FT_FDC_BASE
+#  define CONFIG_FT_FDC_BASE 0x180
+# endif
+# if CONFIG_FT_FDC_IRQ == 0
+#  undef  CONFIG_FT_FDC_IRQ
+#  define CONFIG_FT_FDC_IRQ 9
+# endif
+# if CONFIG_FT_FDC_DMA == 0
+#  undef  CONFIG_FT_FDC_DMA
+#  define CONFIG_FT_FDC_DMA 3
+# endif
+#elif CONFIG_FT_MACH2 == 1    /* CONFIG_FT_PROBE_FC10 == 1 */
+# if CONFIG_FT_FDC_BASE == 0
+#  undef  CONFIG_FT_FDC_BASE
+#  define CONFIG_FT_FDC_BASE 0x1E0
+# endif
+# if CONFIG_FT_FDC_IRQ == 0
+#  undef  CONFIG_FT_FDC_IRQ
+#  define CONFIG_FT_FDC_IRQ 6
+# endif
+# if CONFIG_FT_FDC_DMA == 0
+#  undef  CONFIG_FT_FDC_DMA
+#  define CONFIG_FT_FDC_DMA 2
+# endif
+#elif CONFIG_FT_ALT_FDC == 1  /* CONFIG_FT_MACH2 */
+# if CONFIG_FT_FDC_BASE == 0
+#  undef  CONFIG_FT_FDC_BASE
+#  define CONFIG_FT_FDC_BASE 0x370
+# endif
+# if CONFIG_FT_FDC_IRQ == 0
+#  undef  CONFIG_FT_FDC_IRQ
+#  define CONFIG_FT_FDC_IRQ 6
+# endif
+# if CONFIG_FT_FDC_DMA == 0
+#  undef  CONFIG_FT_FDC_DMA
+#  define CONFIG_FT_FDC_DMA 2
+# endif
+#else                          /* CONFIG_FT_ALT_FDC */
+# if CONFIG_FT_FDC_BASE == 0
+#  undef  CONFIG_FT_FDC_BASE
+#  define CONFIG_FT_FDC_BASE 0x3f0
+# endif
+# if CONFIG_FT_FDC_IRQ == 0
+#  undef  CONFIG_FT_FDC_IRQ
+#  define CONFIG_FT_FDC_IRQ 6
+# endif
+# if CONFIG_FT_FDC_DMA == 0
+#  undef  CONFIG_FT_FDC_DMA
+#  define CONFIG_FT_FDC_DMA 2
+# endif
+#endif                         /* standard FDC */
+
+/*      some useful macro's
+ */
+#define NR_ITEMS(x)     (int)(sizeof(x)/ sizeof(*x))
+
+#endif  /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/futex.h b/include/linux/futex.h
new file mode 100644
index 000000000000..65d6cfdb6d39
--- /dev/null
+++ b/include/linux/futex.h
@@ -0,0 +1,17 @@
+#ifndef _LINUX_FUTEX_H
+#define _LINUX_FUTEX_H
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT (0)
+#define FUTEX_WAKE (1)
+#define FUTEX_FD (2)
+#define FUTEX_REQUEUE (3)
+#define FUTEX_CMP_REQUEUE (4)
+
+long do_futex(unsigned long uaddr, int op, int val,
+		unsigned long timeout, unsigned long uaddr2, int val2,
+		int val3);
+
+#endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
new file mode 100644
index 000000000000..b1272f822cfa
--- /dev/null
+++ b/include/linux/gameport.h
@@ -0,0 +1,198 @@
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
+
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/io.h>
+#include <linux/list.h>
+#include <linux/device.h>
+
+struct gameport {
+
+	void *port_data;	/* Private pointer for gameport drivers */
+	char name[32];
+	char phys[32];
+
+	int io;
+	int speed;
+	int fuzz;
+
+	void (*trigger)(struct gameport *);
+	unsigned char (*read)(struct gameport *);
+	int (*cooked_read)(struct gameport *, int *, int *);
+	int (*calibrate)(struct gameport *, int *, int *);
+	int (*open)(struct gameport *, int);
+	void (*close)(struct gameport *);
+
+	struct timer_list poll_timer;
+	unsigned int poll_interval;	/* in msecs */
+	spinlock_t timer_lock;
+	unsigned int poll_cnt;
+	void (*poll_handler)(struct gameport *);
+
+	struct gameport *parent, *child;
+
+	struct gameport_driver *drv;
+	struct semaphore drv_sem;	/* protects serio->drv so attributes can pin driver */
+
+	struct device dev;
+	unsigned int registered;	/* port has been fully registered with driver core */
+
+	struct list_head node;
+};
+#define to_gameport_port(d)	container_of(d, struct gameport, dev)
+
+struct gameport_driver {
+
+	void *private;
+	char *description;
+
+	int (*connect)(struct gameport *, struct gameport_driver *drv);
+	int (*reconnect)(struct gameport *);
+	void (*disconnect)(struct gameport *);
+
+	struct device_driver driver;
+
+	unsigned int ignore;
+};
+#define to_gameport_driver(d)	container_of(d, struct gameport_driver, driver)
+
+int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode);
+void gameport_close(struct gameport *gameport);
+void gameport_rescan(struct gameport *gameport);
+
+void __gameport_register_port(struct gameport *gameport, struct module *owner);
+static inline void gameport_register_port(struct gameport *gameport)
+{
+	__gameport_register_port(gameport, THIS_MODULE);
+}
+
+void gameport_unregister_port(struct gameport *gameport);
+
+static inline struct gameport *gameport_allocate_port(void)
+{
+	struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL);
+
+	return gameport;
+}
+
+static inline void gameport_free_port(struct gameport *gameport)
+{
+	kfree(gameport);
+}
+
+static inline void gameport_set_name(struct gameport *gameport, const char *name)
+{
+	strlcpy(gameport->name, name, sizeof(gameport->name));
+}
+
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+
+/*
+ * Use the following fucntions to manipulate gameport's per-port
+ * driver-specific data.
+ */
+static inline void *gameport_get_drvdata(struct gameport *gameport)
+{
+	return dev_get_drvdata(&gameport->dev);
+}
+
+static inline void gameport_set_drvdata(struct gameport *gameport, void *data)
+{
+	dev_set_drvdata(&gameport->dev, data);
+}
+
+/*
+ * Use the following fucntions to pin gameport's driver in process context
+ */
+static inline int gameport_pin_driver(struct gameport *gameport)
+{
+	return down_interruptible(&gameport->drv_sem);
+}
+
+static inline void gameport_unpin_driver(struct gameport *gameport)
+{
+	up(&gameport->drv_sem);
+}
+
+void __gameport_register_driver(struct gameport_driver *drv, struct module *owner);
+static inline void gameport_register_driver(struct gameport_driver *drv)
+{
+	__gameport_register_driver(drv, THIS_MODULE);
+}
+
+void gameport_unregister_driver(struct gameport_driver *drv);
+
+#define GAMEPORT_MODE_DISABLED		0
+#define GAMEPORT_MODE_RAW		1
+#define GAMEPORT_MODE_COOKED		2
+
+#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
+
+static inline void gameport_trigger(struct gameport *gameport)
+{
+	if (gameport->trigger)
+		gameport->trigger(gameport);
+	else
+		outb(0xff, gameport->io);
+}
+
+static inline unsigned char gameport_read(struct gameport *gameport)
+{
+	if (gameport->read)
+		return gameport->read(gameport);
+	else
+		return inb(gameport->io);
+}
+
+static inline int gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
+{
+	if (gameport->cooked_read)
+		return gameport->cooked_read(gameport, axes, buttons);
+	else
+		return -1;
+}
+
+static inline int gameport_calibrate(struct gameport *gameport, int *axes, int *max)
+{
+	if (gameport->calibrate)
+		return gameport->calibrate(gameport, axes, max);
+	else
+		return -1;
+}
+
+static inline int gameport_time(struct gameport *gameport, int time)
+{
+	return (time * gameport->speed) / 1000;
+}
+
+static inline void gameport_set_poll_handler(struct gameport *gameport, void (*handler)(struct gameport *))
+{
+	gameport->poll_handler = handler;
+}
+
+static inline void gameport_set_poll_interval(struct gameport *gameport, unsigned int msecs)
+{
+	gameport->poll_interval = msecs;
+}
+
+void gameport_start_polling(struct gameport *gameport);
+void gameport_stop_polling(struct gameport *gameport);
+
+#endif
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
new file mode 100644
index 000000000000..13f4e74609ac
--- /dev/null
+++ b/include/linux/gen_stats.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_GEN_STATS_H
+#define __LINUX_GEN_STATS_H
+
+#include <linux/types.h>
+
+enum {
+	TCA_STATS_UNSPEC,
+	TCA_STATS_BASIC,
+	TCA_STATS_RATE_EST,
+	TCA_STATS_QUEUE,
+	TCA_STATS_APP,
+	__TCA_STATS_MAX,
+};
+#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
+
+/**
+ * struct gnet_stats_basic - byte/packet throughput statistics
+ * @bytes: number of seen bytes
+ * @packets: number of seen packets
+ */
+struct gnet_stats_basic
+{
+	__u64	bytes;
+	__u32	packets;
+};
+
+/**
+ * struct gnet_stats_rate_est - rate estimator
+ * @bps: current byte rate
+ * @pps: current packet rate
+ */
+struct gnet_stats_rate_est
+{
+	__u32	bps;
+	__u32	pps;
+};
+
+/**
+ * struct gnet_stats_queue - queuing statistics
+ * @qlen: queue length
+ * @backlog: backlog size of queue
+ * @drops: number of dropped packets
+ * @requeues: number of requeues
+ * @overlimits: number of enqueues over the limit
+ */
+struct gnet_stats_queue
+{
+	__u32	qlen;
+	__u32	backlog;
+	__u32	drops;
+	__u32	requeues;
+	__u32	overlimits;
+};
+
+/**
+ * struct gnet_estimator - rate estimator configuration
+ * @interval: sampling period
+ * @ewma_log: the log of measurement window weight
+ */
+struct gnet_estimator
+{
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+
+#endif /* __LINUX_GEN_STATS_H */
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
new file mode 100644
index 000000000000..0abe9d9a0069
--- /dev/null
+++ b/include/linux/generic_serial.h
@@ -0,0 +1,96 @@
+/*
+ *  generic_serial.h
+ *
+ *  Copyright (C) 1998 R.E.Wolff@BitWizard.nl
+ *
+ *  written for the SX serial driver.
+ *     Contains the code that should be shared over all the serial drivers.
+ *
+ *  Version 0.1 -- December, 1998.
+ */
+
+#ifndef GENERIC_SERIAL_H
+#define GENERIC_SERIAL_H
+
+struct real_driver {
+  void                    (*disable_tx_interrupts) (void *);
+  void                    (*enable_tx_interrupts) (void *);
+  void                    (*disable_rx_interrupts) (void *);
+  void                    (*enable_rx_interrupts) (void *);
+  int                     (*get_CD) (void *);
+  void                    (*shutdown_port) (void*);
+  int                     (*set_real_termios) (void*);
+  int                     (*chars_in_buffer) (void*);
+  void                    (*close) (void*);
+  void                    (*hungup) (void*);
+  void                    (*getserial) (void*, struct serial_struct *sp);
+};
+
+
+
+struct gs_port {
+  int                     magic;
+  unsigned char           *xmit_buf; 
+  int                     xmit_head;
+  int                     xmit_tail;
+  int                     xmit_cnt;
+  struct semaphore        port_write_sem;
+  int                     flags;
+  wait_queue_head_t       open_wait;
+  wait_queue_head_t       close_wait;
+  int                     count;
+  int                     blocked_open;
+  struct tty_struct       *tty;
+  unsigned long           event;
+  unsigned short          closing_wait;
+  int                     close_delay;
+  struct real_driver      *rd;
+  int                     wakeup_chars;
+  int                     baud_base;
+  int                     baud;
+  int                     custom_divisor;
+  spinlock_t              driver_lock;
+};
+
+
+/* Flags */
+/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
+   used in serial.c, but they are also used in all other serial drivers. 
+   Make sure they don't clash with these here... */
+#define GS_TX_INTEN      0x00800000
+#define GS_RX_INTEN      0x00400000
+#define GS_ACTIVE        0x00200000
+
+
+
+#define GS_TYPE_NORMAL   1
+
+#define GS_DEBUG_FLUSH   0x00000001
+#define GS_DEBUG_BTR     0x00000002
+#define GS_DEBUG_TERMIOS 0x00000004
+#define GS_DEBUG_STUFF   0x00000008
+#define GS_DEBUG_CLOSE   0x00000010
+#define GS_DEBUG_FLOW    0x00000020
+#define GS_DEBUG_WRITE   0x00000040
+
+
+void gs_put_char(struct tty_struct *tty, unsigned char ch);
+int  gs_write(struct tty_struct *tty, 
+             const unsigned char *buf, int count);
+int  gs_write_room(struct tty_struct *tty);
+int  gs_chars_in_buffer(struct tty_struct *tty);
+void gs_flush_buffer(struct tty_struct *tty);
+void gs_flush_chars(struct tty_struct *tty);
+void gs_stop(struct tty_struct *tty);
+void gs_start(struct tty_struct *tty);
+void gs_hangup(struct tty_struct *tty);
+int  gs_block_til_ready(void *port, struct file *filp);
+void gs_close(struct tty_struct *tty, struct file *filp);
+void gs_set_termios (struct tty_struct * tty, 
+                     struct termios * old_termios);
+int  gs_init_port(struct gs_port *port);
+int  gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
+int  gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
+void gs_got_break(struct gs_port *port);
+
+#endif
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
new file mode 100644
index 000000000000..47dedaf971d6
--- /dev/null
+++ b/include/linux/genhd.h
@@ -0,0 +1,424 @@
+#ifndef _LINUX_GENHD_H
+#define _LINUX_GENHD_H
+
+/*
+ * 	genhd.h Copyright (C) 1992 Drew Eckhardt
+ *	Generic hard disk header file by  
+ * 		Drew Eckhardt
+ *
+ *		<drew@colorado.edu>
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+
+enum {
+/* These three have identical behaviour; use the second one if DOS FDISK gets
+   confused about extended/logical partitions starting past cylinder 1023. */
+	DOS_EXTENDED_PARTITION = 5,
+	LINUX_EXTENDED_PARTITION = 0x85,
+	WIN98_EXTENDED_PARTITION = 0x0f,
+
+	LINUX_SWAP_PARTITION = 0x82,
+	LINUX_RAID_PARTITION = 0xfd,	/* autodetect RAID partition */
+
+	SOLARIS_X86_PARTITION =	LINUX_SWAP_PARTITION,
+	NEW_SOLARIS_X86_PARTITION = 0xbf,
+
+	DM6_AUX1PARTITION = 0x51,	/* no DDO:  use xlated geom */
+	DM6_AUX3PARTITION = 0x53,	/* no DDO:  use xlated geom */
+	DM6_PARTITION =	0x54,		/* has DDO: use xlated geom & offset */
+	EZD_PARTITION =	0x55,		/* EZ-DRIVE */
+
+	FREEBSD_PARTITION = 0xa5,	/* FreeBSD Partition ID */
+	OPENBSD_PARTITION = 0xa6,	/* OpenBSD Partition ID */
+	NETBSD_PARTITION = 0xa9,	/* NetBSD Partition ID */
+	BSDI_PARTITION = 0xb7,		/* BSDI Partition ID */
+	MINIX_PARTITION = 0x81,		/* Minix Partition ID */
+	UNIXWARE_PARTITION = 0x63,	/* Same as GNU_HURD and SCO Unix */
+};
+
+#ifndef __KERNEL__
+
+struct partition {
+	unsigned char boot_ind;		/* 0x80 - active */
+	unsigned char head;		/* starting head */
+	unsigned char sector;		/* starting sector */
+	unsigned char cyl;		/* starting cylinder */
+	unsigned char sys_ind;		/* What partition type */
+	unsigned char end_head;		/* end head */
+	unsigned char end_sector;	/* end sector */
+	unsigned char end_cyl;		/* end cylinder */
+	unsigned int start_sect;	/* starting sector counting from 0 */
+	unsigned int nr_sects;		/* nr of sectors in partition */
+} __attribute__((packed));
+
+#endif
+
+#ifdef __KERNEL__
+struct partition {
+	unsigned char boot_ind;		/* 0x80 - active */
+	unsigned char head;		/* starting head */
+	unsigned char sector;		/* starting sector */
+	unsigned char cyl;		/* starting cylinder */
+	unsigned char sys_ind;		/* What partition type */
+	unsigned char end_head;		/* end head */
+	unsigned char end_sector;	/* end sector */
+	unsigned char end_cyl;		/* end cylinder */
+	__le32 start_sect;	/* starting sector counting from 0 */
+	__le32 nr_sects;		/* nr of sectors in partition */
+} __attribute__((packed));
+
+struct hd_struct {
+	sector_t start_sect;
+	sector_t nr_sects;
+	struct kobject kobj;
+	unsigned reads, read_sectors, writes, write_sectors;
+	int policy, partno;
+};
+
+#define GENHD_FL_REMOVABLE			1
+#define GENHD_FL_DRIVERFS			2
+#define GENHD_FL_CD				8
+#define GENHD_FL_UP				16
+#define GENHD_FL_SUPPRESS_PARTITION_INFO	32
+
+struct disk_stats {
+	unsigned read_sectors, write_sectors;
+	unsigned reads, writes;
+	unsigned read_merges, write_merges;
+	unsigned read_ticks, write_ticks;
+	unsigned io_ticks;
+	unsigned time_in_queue;
+};
+	
+struct gendisk {
+	int major;			/* major number of driver */
+	int first_minor;
+	int minors;                     /* maximum number of minors, =1 for
+                                         * disks that can't be partitioned. */
+	char disk_name[32];		/* name of major driver */
+	struct hd_struct **part;	/* [indexed by minor] */
+	struct block_device_operations *fops;
+	struct request_queue *queue;
+	void *private_data;
+	sector_t capacity;
+
+	int flags;
+	char devfs_name[64];		/* devfs crap */
+	int number;			/* more of the same */
+	struct device *driverfs_dev;
+	struct kobject kobj;
+
+	struct timer_rand_state *random;
+	int policy;
+
+	atomic_t sync_io;		/* RAID */
+	unsigned long stamp, stamp_idle;
+	int in_flight;
+#ifdef	CONFIG_SMP
+	struct disk_stats *dkstats;
+#else
+	struct disk_stats dkstats;
+#endif
+};
+
+/* Structure for sysfs attributes on block devices */
+struct disk_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct gendisk *, char *);
+};
+
+/* 
+ * Macros to operate on percpu disk statistics:
+ *
+ * The __ variants should only be called in critical sections. The full
+ * variants disable/enable preemption.
+ */
+#ifdef	CONFIG_SMP
+#define __disk_stat_add(gendiskp, field, addnd) 	\
+	(per_cpu_ptr(gendiskp->dkstats, smp_processor_id())->field += addnd)
+
+#define disk_stat_read(gendiskp, field)					\
+({									\
+	typeof(gendiskp->dkstats->field) res = 0;			\
+	int i;								\
+	for (i=0; i < NR_CPUS; i++) {					\
+		if (!cpu_possible(i))					\
+			continue;					\
+		res += per_cpu_ptr(gendiskp->dkstats, i)->field;	\
+	}								\
+	res;								\
+})
+
+static inline void disk_stat_set_all(struct gendisk *gendiskp, int value)	{
+	int i;
+	for (i=0; i < NR_CPUS; i++) {
+		if (cpu_possible(i)) {
+			memset(per_cpu_ptr(gendiskp->dkstats, i), value,	
+					sizeof (struct disk_stats));
+		}
+	}
+}		
+				
+#else
+#define __disk_stat_add(gendiskp, field, addnd) \
+				(gendiskp->dkstats.field += addnd)
+#define disk_stat_read(gendiskp, field)	(gendiskp->dkstats.field)
+
+static inline void disk_stat_set_all(struct gendisk *gendiskp, int value)	{
+	memset(&gendiskp->dkstats, value, sizeof (struct disk_stats));
+}
+#endif
+
+#define disk_stat_add(gendiskp, field, addnd)			\
+	do {							\
+		preempt_disable();				\
+		__disk_stat_add(gendiskp, field, addnd);	\
+		preempt_enable();				\
+	} while (0)
+
+#define __disk_stat_dec(gendiskp, field) __disk_stat_add(gendiskp, field, -1)
+#define disk_stat_dec(gendiskp, field) disk_stat_add(gendiskp, field, -1)
+
+#define __disk_stat_inc(gendiskp, field) __disk_stat_add(gendiskp, field, 1)
+#define disk_stat_inc(gendiskp, field) disk_stat_add(gendiskp, field, 1)
+
+#define __disk_stat_sub(gendiskp, field, subnd) \
+		__disk_stat_add(gendiskp, field, -subnd)
+#define disk_stat_sub(gendiskp, field, subnd) \
+		disk_stat_add(gendiskp, field, -subnd)
+
+
+/* Inlines to alloc and free disk stats in struct gendisk */
+#ifdef  CONFIG_SMP
+static inline int init_disk_stats(struct gendisk *disk)
+{
+	disk->dkstats = alloc_percpu(struct disk_stats);
+	if (!disk->dkstats)
+		return 0;
+	return 1;
+}
+
+static inline void free_disk_stats(struct gendisk *disk)
+{
+	free_percpu(disk->dkstats);
+}
+#else	/* CONFIG_SMP */
+static inline int init_disk_stats(struct gendisk *disk)
+{
+	return 1;
+}
+
+static inline void free_disk_stats(struct gendisk *disk)
+{
+}
+#endif	/* CONFIG_SMP */
+
+/* drivers/block/ll_rw_blk.c */
+extern void disk_round_stats(struct gendisk *disk);
+
+/* drivers/block/genhd.c */
+extern int get_blkdev_list(char *);
+extern void add_disk(struct gendisk *disk);
+extern void del_gendisk(struct gendisk *gp);
+extern void unlink_gendisk(struct gendisk *gp);
+extern struct gendisk *get_gendisk(dev_t dev, int *part);
+
+extern void set_device_ro(struct block_device *bdev, int flag);
+extern void set_disk_ro(struct gendisk *disk, int flag);
+
+/* drivers/char/random.c */
+extern void add_disk_randomness(struct gendisk *disk);
+extern void rand_initialize_disk(struct gendisk *disk);
+
+static inline sector_t get_start_sect(struct block_device *bdev)
+{
+	return bdev->bd_contains == bdev ? 0 : bdev->bd_part->start_sect;
+}
+static inline sector_t get_capacity(struct gendisk *disk)
+{
+	return disk->capacity;
+}
+static inline void set_capacity(struct gendisk *disk, sector_t size)
+{
+	disk->capacity = size;
+}
+
+#endif  /*  __KERNEL__  */
+
+#ifdef CONFIG_SOLARIS_X86_PARTITION
+
+#define SOLARIS_X86_NUMSLICE	8
+#define SOLARIS_X86_VTOC_SANE	(0x600DDEEEUL)
+
+struct solaris_x86_slice {
+	__le16 s_tag;		/* ID tag of partition */
+	__le16 s_flag;		/* permission flags */
+	__le32 s_start;		/* start sector no of partition */
+	__le32 s_size;		/* # of blocks in partition */
+};
+
+struct solaris_x86_vtoc {
+	unsigned int v_bootinfo[3];	/* info needed by mboot (unsupported) */
+	__le32 v_sanity;		/* to verify vtoc sanity */
+	__le32 v_version;		/* layout version */
+	char	v_volume[8];		/* volume name */
+	__le16	v_sectorsz;		/* sector size in bytes */
+	__le16	v_nparts;		/* number of partitions */
+	unsigned int v_reserved[10];	/* free space */
+	struct solaris_x86_slice
+		v_slice[SOLARIS_X86_NUMSLICE]; /* slice headers */
+	unsigned int timestamp[SOLARIS_X86_NUMSLICE]; /* timestamp (unsupported) */
+	char	v_asciilabel[128];	/* for compatibility */
+};
+
+#endif /* CONFIG_SOLARIS_X86_PARTITION */
+
+#ifdef CONFIG_BSD_DISKLABEL
+/*
+ * BSD disklabel support by Yossi Gottlieb <yogo@math.tau.ac.il>
+ * updated by Marc Espie <Marc.Espie@openbsd.org>
+ */
+
+/* check against BSD src/sys/sys/disklabel.h for consistency */
+
+#define BSD_DISKMAGIC	(0x82564557UL)	/* The disk magic number */
+#define BSD_MAXPARTITIONS	16
+#define OPENBSD_MAXPARTITIONS	16
+#define BSD_FS_UNUSED		0	/* disklabel unused partition entry ID */
+struct bsd_disklabel {
+	__le32	d_magic;		/* the magic number */
+	__s16	d_type;			/* drive type */
+	__s16	d_subtype;		/* controller/d_type specific */
+	char	d_typename[16];		/* type name, e.g. "eagle" */
+	char	d_packname[16];			/* pack identifier */ 
+	__u32	d_secsize;		/* # of bytes per sector */
+	__u32	d_nsectors;		/* # of data sectors per track */
+	__u32	d_ntracks;		/* # of tracks per cylinder */
+	__u32	d_ncylinders;		/* # of data cylinders per unit */
+	__u32	d_secpercyl;		/* # of data sectors per cylinder */
+	__u32	d_secperunit;		/* # of data sectors per unit */
+	__u16	d_sparespertrack;	/* # of spare sectors per track */
+	__u16	d_sparespercyl;		/* # of spare sectors per cylinder */
+	__u32	d_acylinders;		/* # of alt. cylinders per unit */
+	__u16	d_rpm;			/* rotational speed */
+	__u16	d_interleave;		/* hardware sector interleave */
+	__u16	d_trackskew;		/* sector 0 skew, per track */
+	__u16	d_cylskew;		/* sector 0 skew, per cylinder */
+	__u32	d_headswitch;		/* head switch time, usec */
+	__u32	d_trkseek;		/* track-to-track seek, usec */
+	__u32	d_flags;		/* generic flags */
+#define NDDATA 5
+	__u32	d_drivedata[NDDATA];	/* drive-type specific information */
+#define NSPARE 5
+	__u32	d_spare[NSPARE];	/* reserved for future use */
+	__le32	d_magic2;		/* the magic number (again) */
+	__le16	d_checksum;		/* xor of data incl. partitions */
+
+			/* filesystem and partition information: */
+	__le16	d_npartitions;		/* number of partitions in following */
+	__le32	d_bbsize;		/* size of boot area at sn0, bytes */
+	__le32	d_sbsize;		/* max size of fs superblock, bytes */
+	struct	bsd_partition {		/* the partition table */
+		__le32	p_size;		/* number of sectors in partition */
+		__le32	p_offset;	/* starting sector */
+		__le32	p_fsize;	/* filesystem basic fragment size */
+		__u8	p_fstype;	/* filesystem type, see below */
+		__u8	p_frag;		/* filesystem fragments per block */
+		__le16	p_cpg;		/* filesystem cylinders per group */
+	} d_partitions[BSD_MAXPARTITIONS];	/* actually may be more */
+};
+
+#endif	/* CONFIG_BSD_DISKLABEL */
+
+#ifdef CONFIG_UNIXWARE_DISKLABEL
+/*
+ * Unixware slices support by Andrzej Krzysztofowicz <ankry@mif.pg.gda.pl>
+ * and Krzysztof G. Baranowski <kgb@knm.org.pl>
+ */
+
+#define UNIXWARE_DISKMAGIC     (0xCA5E600DUL)	/* The disk magic number */
+#define UNIXWARE_DISKMAGIC2    (0x600DDEEEUL)	/* The slice table magic nr */
+#define UNIXWARE_NUMSLICE      16
+#define UNIXWARE_FS_UNUSED     0		/* Unused slice entry ID */
+
+struct unixware_slice {
+	__le16   s_label;	/* label */
+	__le16   s_flags;	/* permission flags */
+	__le32   start_sect;	/* starting sector */
+	__le32   nr_sects;	/* number of sectors in slice */
+};
+
+struct unixware_disklabel {
+	__le32   d_type;               	/* drive type */
+	__le32   d_magic;                /* the magic number */
+	__le32   d_version;              /* version number */
+	char    d_serial[12];           /* serial number of the device */
+	__le32   d_ncylinders;           /* # of data cylinders per device */
+	__le32   d_ntracks;              /* # of tracks per cylinder */
+	__le32   d_nsectors;             /* # of data sectors per track */
+	__le32   d_secsize;              /* # of bytes per sector */
+	__le32   d_part_start;           /* # of first sector of this partition */
+	__le32   d_unknown1[12];         /* ? */
+ 	__le32	d_alt_tbl;              /* byte offset of alternate table */
+ 	__le32	d_alt_len;              /* byte length of alternate table */
+ 	__le32	d_phys_cyl;             /* # of physical cylinders per device */
+ 	__le32	d_phys_trk;             /* # of physical tracks per cylinder */
+ 	__le32	d_phys_sec;             /* # of physical sectors per track */
+ 	__le32	d_phys_bytes;           /* # of physical bytes per sector */
+ 	__le32	d_unknown2;             /* ? */
+	__le32   d_unknown3;             /* ? */
+	__le32	d_pad[8];               /* pad */
+
+	struct unixware_vtoc {
+		__le32	v_magic;		/* the magic number */
+		__le32	v_version;		/* version number */
+		char	v_name[8];		/* volume name */
+		__le16	v_nslices;		/* # of slices */
+		__le16	v_unknown1;		/* ? */
+		__le32	v_reserved[10];		/* reserved */
+		struct unixware_slice
+			v_slice[UNIXWARE_NUMSLICE];	/* slice headers */
+	} vtoc;
+
+};  /* 408 */
+
+#endif /* CONFIG_UNIXWARE_DISKLABEL */
+
+#ifdef CONFIG_MINIX_SUBPARTITION
+#   define MINIX_NR_SUBPARTITIONS  4
+#endif /* CONFIG_MINIX_SUBPARTITION */
+
+#ifdef __KERNEL__
+
+char *disk_name (struct gendisk *hd, int part, char *buf);
+
+extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
+extern void add_partition(struct gendisk *, int, sector_t, sector_t);
+extern void delete_partition(struct gendisk *, int);
+
+extern struct gendisk *alloc_disk(int minors);
+extern struct kobject *get_disk(struct gendisk *disk);
+extern void put_disk(struct gendisk *disk);
+
+extern void blk_register_region(dev_t dev, unsigned long range,
+			struct module *module,
+			struct kobject *(*probe)(dev_t, int *, void *),
+			int (*lock)(dev_t, void *),
+			void *data);
+extern void blk_unregister_region(dev_t dev, unsigned long range);
+
+static inline struct block_device *bdget_disk(struct gendisk *disk, int index)
+{
+	return bdget(MKDEV(disk->major, disk->first_minor) + index);
+}
+
+#endif
+
+#endif
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
new file mode 100644
index 000000000000..848a1baac079
--- /dev/null
+++ b/include/linux/gfp.h
@@ -0,0 +1,134 @@
+#ifndef __LINUX_GFP_H
+#define __LINUX_GFP_H
+
+#include <linux/mmzone.h>
+#include <linux/stddef.h>
+#include <linux/linkage.h>
+#include <linux/config.h>
+
+struct vm_area_struct;
+
+/*
+ * GFP bitmasks..
+ */
+/* Zone modifiers in GFP_ZONEMASK (see linux/mmzone.h - low two bits) */
+#define __GFP_DMA	0x01
+#define __GFP_HIGHMEM	0x02
+
+/*
+ * Action modifiers - doesn't change the zoning
+ *
+ * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
+ * _might_ fail.  This depends upon the particular VM implementation.
+ *
+ * __GFP_NOFAIL: The VM implementation _must_ retry infinitely: the caller
+ * cannot handle allocation failures.
+ *
+ * __GFP_NORETRY: The VM implementation must not retry indefinitely.
+ */
+#define __GFP_WAIT	0x10u	/* Can wait and reschedule? */
+#define __GFP_HIGH	0x20u	/* Should access emergency pools? */
+#define __GFP_IO	0x40u	/* Can start physical IO? */
+#define __GFP_FS	0x80u	/* Can call down to low-level FS? */
+#define __GFP_COLD	0x100u	/* Cache-cold page required */
+#define __GFP_NOWARN	0x200u	/* Suppress page allocation failure warning */
+#define __GFP_REPEAT	0x400u	/* Retry the allocation.  Might fail */
+#define __GFP_NOFAIL	0x800u	/* Retry for ever.  Cannot fail */
+#define __GFP_NORETRY	0x1000u	/* Do not retry.  Might fail */
+#define __GFP_NO_GROW	0x2000u	/* Slab internal usage */
+#define __GFP_COMP	0x4000u	/* Add compound page metadata */
+#define __GFP_ZERO	0x8000u	/* Return zeroed page on success */
+
+#define __GFP_BITS_SHIFT 16	/* Room for 16 __GFP_FOO bits */
+#define __GFP_BITS_MASK ((1 << __GFP_BITS_SHIFT) - 1)
+
+/* if you forget to add the bitmask here kernel will crash, period */
+#define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \
+			__GFP_COLD|__GFP_NOWARN|__GFP_REPEAT| \
+			__GFP_NOFAIL|__GFP_NORETRY|__GFP_NO_GROW|__GFP_COMP)
+
+#define GFP_ATOMIC	(__GFP_HIGH)
+#define GFP_NOIO	(__GFP_WAIT)
+#define GFP_NOFS	(__GFP_WAIT | __GFP_IO)
+#define GFP_KERNEL	(__GFP_WAIT | __GFP_IO | __GFP_FS)
+#define GFP_USER	(__GFP_WAIT | __GFP_IO | __GFP_FS)
+#define GFP_HIGHUSER	(__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HIGHMEM)
+
+/* Flag - indicates that the buffer will be suitable for DMA.  Ignored on some
+   platforms, used as appropriate on others */
+
+#define GFP_DMA		__GFP_DMA
+
+
+/*
+ * There is only one page-allocator function, and two main namespaces to
+ * it. The alloc_page*() variants return 'struct page *' and as such
+ * can allocate highmem pages, the *get*page*() variants return
+ * virtual kernel addresses to the allocated page(s).
+ */
+
+/*
+ * We get the zone list from the current node and the gfp_mask.
+ * This zone list contains a maximum of MAXNODES*MAX_NR_ZONES zones.
+ *
+ * For the normal case of non-DISCONTIGMEM systems the NODE_DATA() gets
+ * optimized to &contig_page_data at compile-time.
+ */
+
+#ifndef HAVE_ARCH_FREE_PAGE
+static inline void arch_free_page(struct page *page, int order) { }
+#endif
+
+extern struct page *
+FASTCALL(__alloc_pages(unsigned int, unsigned int, struct zonelist *));
+
+static inline struct page *alloc_pages_node(int nid, unsigned int __nocast gfp_mask,
+						unsigned int order)
+{
+	if (unlikely(order >= MAX_ORDER))
+		return NULL;
+
+	return __alloc_pages(gfp_mask, order,
+		NODE_DATA(nid)->node_zonelists + (gfp_mask & GFP_ZONEMASK));
+}
+
+#ifdef CONFIG_NUMA
+extern struct page *alloc_pages_current(unsigned int __nocast gfp_mask, unsigned order);
+
+static inline struct page *
+alloc_pages(unsigned int __nocast gfp_mask, unsigned int order)
+{
+	if (unlikely(order >= MAX_ORDER))
+		return NULL;
+
+	return alloc_pages_current(gfp_mask, order);
+}
+extern struct page *alloc_page_vma(unsigned __nocast gfp_mask,
+			struct vm_area_struct *vma, unsigned long addr);
+#else
+#define alloc_pages(gfp_mask, order) \
+		alloc_pages_node(numa_node_id(), gfp_mask, order)
+#define alloc_page_vma(gfp_mask, vma, addr) alloc_pages(gfp_mask, 0)
+#endif
+#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
+
+extern unsigned long FASTCALL(__get_free_pages(unsigned int __nocast gfp_mask, unsigned int order));
+extern unsigned long FASTCALL(get_zeroed_page(unsigned int __nocast gfp_mask));
+
+#define __get_free_page(gfp_mask) \
+		__get_free_pages((gfp_mask),0)
+
+#define __get_dma_pages(gfp_mask, order) \
+		__get_free_pages((gfp_mask) | GFP_DMA,(order))
+
+extern void FASTCALL(__free_pages(struct page *page, unsigned int order));
+extern void FASTCALL(free_pages(unsigned long addr, unsigned int order));
+extern void FASTCALL(free_hot_page(struct page *page));
+extern void FASTCALL(free_cold_page(struct page *page));
+
+#define __free_page(page) __free_pages((page), 0)
+#define free_page(addr) free_pages((addr),0)
+
+void page_alloc_init(void);
+
+#endif /* __LINUX_GFP_H */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
new file mode 100644
index 000000000000..ebc712e91066
--- /dev/null
+++ b/include/linux/hardirq.h
@@ -0,0 +1,106 @@
+#ifndef LINUX_HARDIRQ_H
+#define LINUX_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <asm/hardirq.h>
+#include <asm/system.h>
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ *
+ * The hardirq count can be overridden per architecture, the default is:
+ *
+ * - bits 16-27 are the hardirq count (max # of hardirqs: 4096)
+ * - ( bit 28 is the PREEMPT_ACTIVE flag. )
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * SOFTIRQ_MASK: 0x0000ff00
+ * HARDIRQ_MASK: 0x0fff0000
+ */
+#define PREEMPT_BITS	8
+#define SOFTIRQ_BITS	8
+
+#ifndef HARDIRQ_BITS
+#define HARDIRQ_BITS	12
+/*
+ * The hardirq mask has to be large enough to have space for potentially
+ * all IRQ sources in the system nesting on a single CPU.
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+#endif
+
+#define PREEMPT_SHIFT	0
+#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
+#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
+
+#define __IRQ_MASK(x)	((1UL << (x))-1)
+
+#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
+#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
+#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+
+#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
+#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
+#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
+
+#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
+#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
+#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK))
+
+/*
+ * Are we doing bottom half or hardware interrupt processing?
+ * Are we in a softirq context? Interrupt context?
+ */
+#define in_irq()		(hardirq_count())
+#define in_softirq()		(softirq_count())
+#define in_interrupt()		(irq_count())
+
+#if defined(CONFIG_PREEMPT) && !defined(CONFIG_PREEMPT_BKL)
+# define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != kernel_locked())
+#else
+# define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
+#endif
+
+#ifdef CONFIG_PREEMPT
+# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
+# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
+#else
+# define preemptible()	0
+# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
+#endif
+
+#ifdef CONFIG_SMP
+extern void synchronize_irq(unsigned int irq);
+#else
+# define synchronize_irq(irq)	barrier()
+#endif
+
+#define nmi_enter()		irq_enter()
+#define nmi_exit()		sub_preempt_count(HARDIRQ_OFFSET)
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+static inline void account_user_vtime(struct task_struct *tsk)
+{
+}
+
+static inline void account_system_vtime(struct task_struct *tsk)
+{
+}
+#endif
+
+#define irq_enter()					\
+	do {						\
+		account_system_vtime(current);		\
+		add_preempt_count(HARDIRQ_OFFSET);	\
+	} while (0)
+
+extern void irq_exit(void);
+
+#endif /* LINUX_HARDIRQ_H */
diff --git a/include/linux/harrier_defs.h b/include/linux/harrier_defs.h
new file mode 100644
index 000000000000..685b252e16cc
--- /dev/null
+++ b/include/linux/harrier_defs.h
@@ -0,0 +1,212 @@
+/*
+ * asm-ppc/harrier_defs.h
+ *
+ * Definitions for Motorola MCG Harrier North Bridge & Memory controller
+ *
+ * Author: Dale Farnsworth
+ *         dale.farnsworth@mvista.com
+ *
+ * Extracted from asm-ppc/harrier.h by:
+ * 	   Randy Vinson
+ * 	   rvinson@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASMPPC_HARRIER_DEFS_H
+#define __ASMPPC_HARRIER_DEFS_H
+
+#define HARRIER_DEFAULT_XCSR_BASE	0xfeff0000
+
+#define HARRIER_VEND_DEV_ID		0x1057480b
+
+#define HARRIER_VENI_OFF		0x00
+
+#define HARRIER_REVI_OFF		0x05
+#define HARRIER_UCTL_OFF		0xd0
+#define HARRIER_XTAL64_MASK		0x02
+
+#define HARRIER_MISC_CSR_OFF		0x1c
+#define HARRIER_RSTOUT			0x01000000
+#define HARRIER_SYSCON			0x08000000
+#define HARRIER_EREADY			0x10000000
+#define HARRIER_ERDYS			0x20000000
+
+/* Function exception registers */
+#define HARRIER_FEEN_OFF		0x40	/* enable */
+#define HARRIER_FEST_OFF		0x44	/* status */
+#define HARRIER_FEMA_OFF		0x48	/* mask */
+#define HARRIER_FECL_OFF		0x4c	/* clear */
+
+#define HARRIER_FE_DMA			0x80
+#define HARRIER_FE_MIDB			0x40
+#define HARRIER_FE_MIM0			0x20
+#define HARRIER_FE_MIM1			0x10
+#define HARRIER_FE_MIP			0x08
+#define HARRIER_FE_UA0			0x04
+#define HARRIER_FE_UA1			0x02
+#define HARRIER_FE_ABT			0x01
+
+#define HARRIER_SERIAL_0_OFF		0xc0
+
+#define HARRIER_MBAR_OFF		0xe0
+#define HARRIER_MBAR_MSK		0xfffc0000
+#define HARRIER_MPIC_CSR_OFF		0xe4
+#define HARRIER_MPIC_OPI_ENABLE		0x40
+#define HARRIER_MPIC_IFEVP_OFF		0x10200
+#define HARRIER_MPIC_IFEVP_VECT_MSK	0xff
+#define HARRIER_MPIC_IFEDE_OFF		0x10210
+
+/*
+ * Define the Memory Controller register offsets.
+ */
+#define HARRIER_SDBA_OFF		0x110
+#define HARRIER_SDBB_OFF		0x114
+#define HARRIER_SDBC_OFF		0x118
+#define HARRIER_SDBD_OFF		0x11c
+#define HARRIER_SDBE_OFF		0x120
+#define HARRIER_SDBF_OFF		0x124
+#define HARRIER_SDBG_OFF		0x128
+#define HARRIER_SDBH_OFF		0x12c
+
+#define HARRIER_SDB_ENABLE		0x00000100
+#define HARRIER_SDB_SIZE_MASK		0xf
+#define HARRIER_SDB_SIZE_SHIFT		16
+#define HARRIER_SDB_BASE_MASK		0xff
+#define HARRIER_SDB_BASE_SHIFT		24
+
+/*
+ * Define outbound register offsets.
+ */
+#define HARRIER_OTAD0_OFF		0x220
+#define HARRIER_OTOF0_OFF		0x224
+#define HARRIER_OTAD1_OFF		0x228
+#define HARRIER_OTOF1_OFF		0x22c
+#define HARRIER_OTAD2_OFF		0x230
+#define HARRIER_OTOF2_OFF		0x234
+#define HARRIER_OTAD3_OFF		0x238
+#define HARRIER_OTOF3_OFF		0x23c
+
+#define HARRIER_OTADX_START_MSK		0xffff0000UL
+#define HARRIER_OTADX_END_MSK		0x0000ffffUL
+
+#define HARRIER_OTOFX_OFF_MSK		0xffff0000UL
+#define HARRIER_OTOFX_ENA		0x80UL
+#define HARRIER_OTOFX_WPE		0x10UL
+#define HARRIER_OTOFX_SGE		0x08UL
+#define HARRIER_OTOFX_RAE		0x04UL
+#define HARRIER_OTOFX_MEM		0x02UL
+#define HARRIER_OTOFX_IOM		0x01UL
+
+/*
+ * Define generic message passing register offsets
+ */
+/* Mirrored registers (visible from both PowerPC and PCI space) */
+#define HARRIER_XCSR_MP_BASE_OFF	0x290	/* base offset in XCSR space */
+#define HARRIER_PMEP_MP_BASE_OFF	0x100	/* base offset in PMEM space */
+#define HARRIER_MGOM0_OFF		0x00	/* outbound msg 0 */
+#define HARRIER_MGOM1_OFF		0x04	/* outbound msg 1 */
+#define HARRIER_MGOD_OFF		0x08	/* outbound doorbells */
+
+#define HARRIER_MGIM0_OFF		0x10	/* inbound msg 0 */
+#define HARRIER_MGIM1_OFF		0x14	/* inbound msg 1 */
+#define HARRIER_MGID_OFF		0x18	/* inbound doorbells */
+
+/* PowerPC-only registers */
+#define HARRIER_MGIDM_OFF		0x20	/* inbound doorbell mask */
+
+/* PCI-only registers */
+#define HARRIER_PMEP_MGST_OFF		0x20	/* (outbound) interrupt status */
+#define HARRIER_PMEP_MGMS_OFF		0x24	/* (outbound) interrupt mask */
+#define HARRIER_MG_OMI0			(1<<4)
+#define HARRIER_MG_OMI1			(1<<5)
+
+#define HARRIER_PMEP_MGODM_OFF		0x28	/* outbound doorbell mask */
+
+/*
+ * Define PCI configuration space register offsets
+ */
+#define HARRIER_XCSR_TO_PCFS_OFF	0x300
+
+/*
+ * Define message passing attribute register offset
+ */
+#define HARRIER_MPAT_OFF		0x44
+
+/*
+ * Define inbound attribute register offsets.
+ */
+#define HARRIER_ITSZ0_OFF		0x48
+#define HARRIER_ITAT0_OFF		0x4c
+
+#define HARRIER_ITSZ1_OFF		0x50
+#define HARRIER_ITAT1_OFF		0x54
+
+#define HARRIER_ITSZ2_OFF		0x58
+#define HARRIER_ITAT2_OFF		0x5c
+
+#define HARRIER_ITSZ3_OFF		0x60
+#define HARRIER_ITAT3_OFF		0x64
+
+/* inbound translation size constants */
+#define HARRIER_ITSZ_MSK		0xff
+#define HARRIER_ITSZ_4KB		0x00
+#define HARRIER_ITSZ_8KB		0x01
+#define HARRIER_ITSZ_16KB		0x02
+#define HARRIER_ITSZ_32KB		0x03
+#define HARRIER_ITSZ_64KB		0x04
+#define HARRIER_ITSZ_128KB		0x05
+#define HARRIER_ITSZ_256KB		0x06
+#define HARRIER_ITSZ_512KB		0x07
+#define HARRIER_ITSZ_1MB		0x08
+#define HARRIER_ITSZ_2MB		0x09
+#define HARRIER_ITSZ_4MB		0x0A
+#define HARRIER_ITSZ_8MB		0x0B
+#define HARRIER_ITSZ_16MB		0x0C
+#define HARRIER_ITSZ_32MB		0x0D
+#define HARRIER_ITSZ_64MB		0x0E
+#define HARRIER_ITSZ_128MB		0x0F
+#define HARRIER_ITSZ_256MB		0x10
+#define HARRIER_ITSZ_512MB		0x11
+#define HARRIER_ITSZ_1GB		0x12
+#define HARRIER_ITSZ_2GB		0x13
+
+/* inbound translation offset */
+#define HARRIER_ITOF_SHIFT		0x10
+#define HARRIER_ITOF_MSK		0xffff
+
+/* inbound translation atttributes */
+#define HARRIER_ITAT_PRE		(1<<3)
+#define HARRIER_ITAT_RAE		(1<<4)
+#define HARRIER_ITAT_WPE		(1<<5)
+#define HARRIER_ITAT_MEM		(1<<6)
+#define HARRIER_ITAT_ENA		(1<<7)
+#define HARRIER_ITAT_GBL		(1<<16)
+
+#define HARRIER_LBA_OFF			0x80
+#define HARRIER_LBA_MSK			(1<<31)
+
+#define HARRIER_XCSR_SIZE		1024
+
+/* macros to calculate message passing register offsets */
+#define HARRIER_MP_XCSR(x) ((u32)HARRIER_XCSR_MP_BASE_OFF + (u32)x)
+
+#define HARRIER_MP_PMEP(x) ((u32)HARRIER_PMEP_MP_BASE_OFF + (u32)x)
+
+/*
+ * Define PCI configuration space register offsets
+ */
+#define HARRIER_MPBAR_OFF		PCI_BASE_ADDRESS_0
+#define HARRIER_ITBAR0_OFF		PCI_BASE_ADDRESS_1
+#define HARRIER_ITBAR1_OFF		PCI_BASE_ADDRESS_2
+#define HARRIER_ITBAR2_OFF		PCI_BASE_ADDRESS_3
+#define HARRIER_ITBAR3_OFF		PCI_BASE_ADDRESS_4
+
+#define HARRIER_XCSR_CONFIG(x) ((u32)HARRIER_XCSR_TO_PCFS_OFF + (u32)x)
+
+#endif				/* __ASMPPC_HARRIER_DEFS_H */
diff --git a/include/linux/hash.h b/include/linux/hash.h
new file mode 100644
index 000000000000..acf17bb8e7f9
--- /dev/null
+++ b/include/linux/hash.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_HASH_H
+#define _LINUX_HASH_H
+/* Fast hashing routine for a long.
+   (C) 2002 William Lee Irwin III, IBM */
+
+/*
+ * Knuth recommends primes in approximately golden ratio to the maximum
+ * integer representable by a machine word for multiplicative hashing.
+ * Chuck Lever verified the effectiveness of this technique:
+ * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf
+ *
+ * These primes are chosen to be bit-sparse, that is operations on
+ * them can use shifts and additions instead of multiplications for
+ * machines where multiplications are slow.
+ */
+#if BITS_PER_LONG == 32
+/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
+#define GOLDEN_RATIO_PRIME 0x9e370001UL
+#elif BITS_PER_LONG == 64
+/*  2^63 + 2^61 - 2^57 + 2^54 - 2^51 - 2^18 + 1 */
+#define GOLDEN_RATIO_PRIME 0x9e37fffffffc0001UL
+#else
+#error Define GOLDEN_RATIO_PRIME for your wordsize.
+#endif
+
+static inline unsigned long hash_long(unsigned long val, unsigned int bits)
+{
+	unsigned long hash = val;
+
+#if BITS_PER_LONG == 64
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	unsigned long n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+#else
+	/* On some cpus multiply is faster, on others gcc will do shifts */
+	hash *= GOLDEN_RATIO_PRIME;
+#endif
+
+	/* High bits are more random, so use them. */
+	return hash >> (BITS_PER_LONG - bits);
+}
+	
+static inline unsigned long hash_ptr(void *ptr, unsigned int bits)
+{
+	return hash_long((unsigned long)ptr, bits);
+}
+#endif /* _LINUX_HASH_H */
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
new file mode 100644
index 000000000000..b436be7a7fff
--- /dev/null
+++ b/include/linux/hayesesp.h
@@ -0,0 +1,124 @@
+#ifndef HAYESESP_H
+#define HAYESESP_H
+
+struct hayes_esp_config {
+	short flow_on;
+	short flow_off;
+	short rx_trigger;
+	short tx_trigger;
+	short pio_threshold;
+	unsigned char rx_timeout;
+	char dma_channel;
+};
+
+#ifdef __KERNEL__
+
+#define ESP_DMA_CHANNEL   0
+#define ESP_RX_TRIGGER    768
+#define ESP_TX_TRIGGER    768
+#define ESP_FLOW_OFF      1016
+#define ESP_FLOW_ON       944
+#define ESP_RX_TMOUT      128
+#define ESP_PIO_THRESHOLD 32
+
+#define ESP_IN_MAJOR	57	/* major dev # for dial in */
+#define ESP_OUT_MAJOR	58	/* major dev # for dial out */
+#define ESPC_SCALE 	3
+#define UART_ESI_BASE	0x00
+#define UART_ESI_SID	0x01
+#define UART_ESI_RX	0x02
+#define UART_ESI_TX	0x02
+#define UART_ESI_CMD1	0x04
+#define UART_ESI_CMD2	0x05
+#define UART_ESI_STAT1	0x04
+#define UART_ESI_STAT2	0x05
+#define UART_ESI_RWS	0x07
+
+#define UART_IER_DMA_TMOUT	0x80
+#define UART_IER_DMA_TC		0x08
+
+#define ESI_SET_IRQ		0x04
+#define ESI_SET_DMA_TMOUT	0x05
+#define ESI_SET_SRV_MASK	0x06
+#define ESI_SET_ERR_MASK	0x07
+#define ESI_SET_FLOW_CNTL	0x08
+#define ESI_SET_FLOW_CHARS	0x09
+#define ESI_SET_FLOW_LVL	0x0a
+#define ESI_SET_TRIGGER		0x0b
+#define ESI_SET_RX_TIMEOUT	0x0c
+#define ESI_SET_FLOW_TMOUT	0x0d
+#define ESI_WRITE_UART		0x0e
+#define ESI_READ_UART		0x0f
+#define ESI_SET_MODE		0x10
+#define ESI_GET_ERR_STAT	0x12
+#define ESI_GET_UART_STAT	0x13
+#define ESI_GET_RX_AVAIL	0x14
+#define ESI_GET_TX_AVAIL	0x15
+#define ESI_START_DMA_RX	0x16
+#define ESI_START_DMA_TX	0x17
+#define ESI_ISSUE_BREAK		0x1a
+#define ESI_FLUSH_RX		0x1b
+#define ESI_FLUSH_TX		0x1c
+#define ESI_SET_BAUD		0x1d
+#define ESI_SET_ENH_IRQ		0x1f
+#define ESI_SET_REINTR		0x20
+#define ESI_SET_PRESCALAR	0x23
+#define ESI_NO_COMMAND		0xff
+
+#define ESP_STAT_RX_TIMEOUT	0x01
+#define ESP_STAT_DMA_RX		0x02
+#define ESP_STAT_DMA_TX		0x04
+#define ESP_STAT_NEVER_DMA      0x08
+#define ESP_STAT_USE_PIO        0x10
+
+#define ESP_EVENT_WRITE_WAKEUP	0
+#define ESP_MAGIC		0x53ee
+#define ESP_XMIT_SIZE		4096
+
+struct esp_struct {
+	int			magic;
+	spinlock_t		lock;
+	int			port;
+	int			irq;
+	int			flags; 		/* defined in tty.h */
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			stat_flags;
+	int			custom_divisor;
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned short		closing_wait2;
+	int			IER; 	/* Interrupt Enable Register */
+	int			MCR; 	/* Modem control register */
+	unsigned long		event;
+	unsigned long		last_active;
+	int			line;
+	int			count;	    /* # of fd on device */
+	int			blocked_open; /* # of blocked opens */
+	unsigned char 		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+	struct work_struct	tqueue;
+	struct work_struct	tqueue_hangup;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	wait_queue_head_t	delta_msr_wait;
+	wait_queue_head_t	break_wait;
+	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
+	struct hayes_esp_config config; /* port configuration */
+	struct esp_struct	*next_port; /* For the linked list */
+};
+
+struct esp_pio_buffer {
+	unsigned char data[1024];
+	struct esp_pio_buffer *next;
+};
+
+#endif /* __KERNEL__ */
+
+
+#endif /* ESP_H */
+
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
new file mode 100644
index 000000000000..503194e62fe1
--- /dev/null
+++ b/include/linux/hdlc.h
@@ -0,0 +1,258 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __HDLC_H
+#define __HDLC_H
+
+#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
+
+#define CLOCK_DEFAULT   0	/* Default setting */
+#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
+#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
+#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
+#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
+
+
+#define ENCODING_DEFAULT	0 /* Default setting */
+#define ENCODING_NRZ		1
+#define ENCODING_NRZI		2
+#define ENCODING_FM_MARK	3
+#define ENCODING_FM_SPACE	4
+#define ENCODING_MANCHESTER	5
+
+
+#define PARITY_DEFAULT		0 /* Default setting */
+#define PARITY_NONE		1 /* No parity */
+#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
+#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
+#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
+#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
+#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
+#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
+
+#define LMI_DEFAULT		0 /* Default setting */
+#define LMI_NONE		1 /* No LMI, all PVCs are static */
+#define LMI_ANSI		2 /* ANSI Annex D */
+#define LMI_CCITT		3 /* ITU-T Annex A */
+
+#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+
+
+#ifdef __KERNEL__
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <net/syncppp.h>
+#include <linux/hdlc/ioctl.h>
+
+
+typedef struct {		/* Used in Cisco and PPP mode */
+	u8 address;
+	u8 control;
+	u16 protocol;
+}__attribute__ ((packed)) hdlc_header;
+
+
+
+typedef struct {
+	u32 type;		/* code */
+	u32 par1;
+	u32 par2;
+	u16 rel;		/* reliability */
+	u32 time;
+}__attribute__ ((packed)) cisco_packet;
+#define	CISCO_PACKET_LEN	18
+#define	CISCO_BIG_PACKET_LEN	20
+
+
+
+typedef struct pvc_device_struct {
+	struct net_device *master;
+	struct net_device *main;
+	struct net_device *ether; /* bridged Ethernet interface */
+	struct pvc_device_struct *next;	/* Sorted in ascending DLCI order */
+	int dlci;
+	int open_count;
+
+	struct {
+		unsigned int new: 1;
+		unsigned int active: 1;
+		unsigned int exist: 1;
+		unsigned int deleted: 1;
+		unsigned int fecn: 1;
+		unsigned int becn: 1;
+	}state;
+}pvc_device;
+
+
+
+typedef struct hdlc_device_struct {
+	/* To be initialized by hardware driver */
+	struct net_device_stats stats;
+
+	/* used by HDLC layer to take control over HDLC device from hw driver*/
+	int (*attach)(struct net_device *dev,
+		      unsigned short encoding, unsigned short parity);
+
+	/* hardware driver must handle this instead of dev->hard_start_xmit */
+	int (*xmit)(struct sk_buff *skb, struct net_device *dev);
+
+
+	/* Things below are for HDLC layer internal use only */
+	struct {
+		int (*open)(struct net_device *dev);
+		void (*close)(struct net_device *dev);
+
+		/* if open & DCD */
+		void (*start)(struct net_device *dev);
+		/* if open & !DCD */
+		void (*stop)(struct net_device *dev);
+
+		void (*detach)(struct hdlc_device_struct *hdlc);
+		int (*netif_rx)(struct sk_buff *skb);
+		unsigned short (*type_trans)(struct sk_buff *skb,
+					     struct net_device *dev);
+		int id;		/* IF_PROTO_HDLC/CISCO/FR/etc. */
+	}proto;
+
+	int carrier;
+	int open;
+	spinlock_t state_lock;
+
+	union {
+		struct {
+			fr_proto settings;
+			pvc_device *first_pvc;
+			int dce_pvc_count;
+
+			struct timer_list timer;
+			unsigned long last_poll;
+			int reliable;
+			int dce_changed;
+			int request;
+			int fullrep_sent;
+			u32 last_errors; /* last errors bit list */
+			u8 n391cnt;
+			u8 txseq; /* TX sequence number */
+			u8 rxseq; /* RX sequence number */
+		}fr;
+
+		struct {
+			cisco_proto settings;
+
+			struct timer_list timer;
+			unsigned long last_poll;
+			int up;
+			int request_sent;
+			u32 txseq; /* TX sequence number */
+			u32 rxseq; /* RX sequence number */
+		}cisco;
+
+		struct {
+			raw_hdlc_proto settings;
+		}raw_hdlc;
+
+		struct {
+			struct ppp_device pppdev;
+			struct ppp_device *syncppp_ptr;
+			int (*old_change_mtu)(struct net_device *dev,
+					      int new_mtu);
+		}ppp;
+	}state;
+	void *priv;
+}hdlc_device;
+
+
+
+int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr);
+int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
+int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr);
+int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr);
+int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr);
+int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr);
+
+
+/* Exported from hdlc.o */
+
+/* Called by hardware driver when a user requests HDLC service */
+int hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+
+/* Must be used by hardware driver on module startup/exit */
+int register_hdlc_device(struct net_device *dev);
+void unregister_hdlc_device(struct net_device *dev);
+
+struct net_device *alloc_hdlcdev(void *priv);
+
+static __inline__ hdlc_device* dev_to_hdlc(struct net_device *dev)
+{
+	return netdev_priv(dev);
+}
+
+
+static __inline__ pvc_device* dev_to_pvc(struct net_device *dev)
+{
+	return (pvc_device*)dev->priv;
+}
+
+
+static __inline__ void debug_frame(const struct sk_buff *skb)
+{
+	int i;
+
+	for (i=0; i < skb->len; i++) {
+		if (i == 100) {
+			printk("...\n");
+			return;
+		}
+		printk(" %02X", skb->data[i]);
+	}
+	printk("\n");
+}
+
+
+/* Must be called by hardware driver when HDLC device is being opened */
+int hdlc_open(struct net_device *dev);
+/* Must be called by hardware driver when HDLC device is being closed */
+void hdlc_close(struct net_device *dev);
+/* Called by hardware driver when DCD line level changes */
+void hdlc_set_carrier(int on, struct net_device *dev);
+
+/* May be used by hardware driver to gain control over HDLC device */
+static __inline__ void hdlc_proto_detach(hdlc_device *hdlc)
+{
+	if (hdlc->proto.detach)
+		hdlc->proto.detach(hdlc);
+	hdlc->proto.detach = NULL;
+}
+
+
+static __inline__ struct net_device_stats *hdlc_stats(struct net_device *dev)
+{
+	return &dev_to_hdlc(dev)->stats;
+}
+
+
+static __inline__ unsigned short hdlc_type_trans(struct sk_buff *skb,
+						 struct net_device *dev)
+{
+	hdlc_device *hdlc = dev_to_hdlc(dev);
+
+	skb->mac.raw  = skb->data;
+	skb->dev      = dev;
+
+	if (hdlc->proto.type_trans)
+		return hdlc->proto.type_trans(skb, dev);
+	else
+		return htons(ETH_P_HDLC);
+}
+
+#endif /* __KERNEL */
+#endif /* __HDLC_H */
diff --git a/include/linux/hdlc/ioctl.h b/include/linux/hdlc/ioctl.h
new file mode 100644
index 000000000000..78430ba3ea69
--- /dev/null
+++ b/include/linux/hdlc/ioctl.h
@@ -0,0 +1,48 @@
+#ifndef __HDLC_IOCTL_H__
+#define __HDLC_IOCTL_H__
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+} sync_serial_settings;          /* V.35, V.24, X.21 */
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+	unsigned int slot_map;
+} te1_settings;                  /* T1, E1 */
+
+typedef struct {
+	unsigned short encoding;
+	unsigned short parity;
+} raw_hdlc_proto;
+
+typedef struct {
+	unsigned int t391;
+	unsigned int t392;
+	unsigned int n391;
+	unsigned int n392;
+	unsigned int n393;
+	unsigned short lmi;
+	unsigned short dce; /* 1 for DCE (network side) operation */
+} fr_proto;
+
+typedef struct {
+	unsigned int dlci;
+} fr_proto_pvc;          /* for creating/deleting FR PVCs */
+
+typedef struct {
+	unsigned int dlci;
+	char master[IFNAMSIZ];	/* Name of master FRAD device */
+}fr_proto_pvc_info;		/* for returning PVC information only */
+
+typedef struct {
+    unsigned int interval;
+    unsigned int timeout;
+} cisco_proto;
+
+/* PPP doesn't need any info now - supply length = 0 to ioctl */
+
+#endif /* __HDLC_IOCTL_H__ */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
new file mode 100644
index 000000000000..4f6ee3b267fa
--- /dev/null
+++ b/include/linux/hdlcdrv.h
@@ -0,0 +1,378 @@
+/*
+ * hdlcdrv.h  -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _HDLCDRV_H
+#define _HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+	int iobase;
+	int irq;
+	int dma;
+	int dma2;
+	int seriobase;
+	int pariobase;
+	int midiiobase;
+};	
+
+struct hdlcdrv_channel_params {
+	int tx_delay;  /* the transmitter keyup delay in 10ms units */
+	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+	int ppersist;  /* the p-persistence 0..255 */
+	int fulldup;   /* some driver do not support full duplex, setting */
+	               /* this just makes them send even if DCD is on */
+};	
+
+struct hdlcdrv_old_channel_state {
+  	int ptt;
+  	int dcd;
+  	int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ 	int ptt;
+ 	int dcd;
+ 	int ptt_keyed;
+ 	unsigned long tx_packets;
+ 	unsigned long tx_errors;
+ 	unsigned long rx_packets;
+ 	unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+	int cmd;
+	union {
+		struct hdlcdrv_params mp;
+		struct hdlcdrv_channel_params cp;
+		struct hdlcdrv_channel_state cs;
+		struct hdlcdrv_old_channel_state ocs;
+		unsigned int calibrate;
+		unsigned char bits;
+		char modename[128];
+		char drivername[32];
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR       0
+#define HDLCDRVCTL_SETMODEMPAR       1
+#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR    10
+#define HDLCDRVCTL_SETCHANNELPAR    11
+#define HDLCDRVCTL_OLDGETSTAT       20
+#define HDLCDRVCTL_CALIBRATE        21
+#define HDLCDRVCTL_GETSTAT          22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES       30
+#define HDLCDRVCTL_GETBITS          31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE          40
+#define HDLCDRVCTL_SETMODE          41
+#define HDLCDRVCTL_MODELIST         42
+#define HDLCDRVCTL_DRIVERNAME       43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE      (1<<0)
+#define HDLCDRV_PARMASK_IRQ         (1<<1)
+#define HDLCDRV_PARMASK_DMA         (1<<2)
+#define HDLCDRV_PARMASK_DMA2        (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+#include <linux/if.h>
+#include <linux/spinlock.h>
+
+#define HDLCDRV_MAGIC      0x5ac6e778
+#define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
+#define HDLCDRV_BITBUFFER  256 /* should be a power of 2 for speed reasons */
+#undef HDLCDRV_LOOPBACK  /* define for HDLC debugging purposes */
+#define HDLCDRV_DEBUG
+
+/* maximum packet length, excluding CRC */
+#define HDLCDRV_MAXFLEN             400	
+
+
+struct hdlcdrv_hdlcbuffer {
+	spinlock_t lock;
+	unsigned rd, wr;
+	unsigned short buf[HDLCDRV_HDLCBUFFER];
+};
+
+#ifdef HDLCDRV_DEBUG
+struct hdlcdrv_bitbuffer {
+	unsigned int rd;
+	unsigned int wr;
+	unsigned int shreg;
+	unsigned char buffer[HDLCDRV_BITBUFFER];
+};
+
+static inline void hdlcdrv_add_bitbuffer(struct hdlcdrv_bitbuffer *buf, 
+					 unsigned int bit)
+{
+	unsigned char new;
+
+	new = buf->shreg & 1;
+	buf->shreg >>= 1;
+	buf->shreg |= (!!bit) << 7;
+	if (new) {
+		buf->buffer[buf->wr] = buf->shreg;
+		buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+		buf->shreg = 0x80;
+	}
+}
+
+static inline void hdlcdrv_add_bitbuffer_word(struct hdlcdrv_bitbuffer *buf, 
+					      unsigned int bits)
+{
+	buf->buffer[buf->wr] = bits & 0xff;
+	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+	buf->buffer[buf->wr] = (bits >> 8) & 0xff;
+	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+
+}
+#endif /* HDLCDRV_DEBUG */
+
+/* -------------------------------------------------------------------- */
+/*
+ * Information that need to be kept for each driver. 
+ */
+
+struct hdlcdrv_ops {
+	/*
+	 * first some informations needed by the hdlcdrv routines
+	 */
+	const char *drvname;
+	const char *drvinfo;
+	/*
+	 * the routines called by the hdlcdrv routines
+	 */
+	int (*open)(struct net_device *);
+	int (*close)(struct net_device *);
+	int (*ioctl)(struct net_device *, struct ifreq *, 
+		     struct hdlcdrv_ioctl *, int);
+};
+
+struct hdlcdrv_state {
+	int magic;
+	int opened;
+
+	const struct hdlcdrv_ops *ops;
+
+	struct {
+		int bitrate;
+	} par;
+
+	struct hdlcdrv_pttoutput {
+		int dma2;
+		int seriobase;
+		int pariobase;
+		int midiiobase;
+		unsigned int flags;
+	} ptt_out;
+
+	struct hdlcdrv_channel_params ch_params;
+
+	struct hdlcdrv_hdlcrx {
+		struct hdlcdrv_hdlcbuffer hbuf;
+		long in_hdlc_rx;
+		/* 0 = sync hunt, != 0 receiving */
+		int rx_state;	
+		unsigned int bitstream;
+		unsigned int bitbuf;
+		int numbits;
+		unsigned char dcd;
+		
+		int len;
+		unsigned char *bp;
+		unsigned char buffer[HDLCDRV_MAXFLEN+2];
+	} hdlcrx;
+
+	struct hdlcdrv_hdlctx {
+		struct hdlcdrv_hdlcbuffer hbuf;
+		long in_hdlc_tx;
+		/*
+		 * 0 = send flags
+		 * 1 = send txtail (flags)
+		 * 2 = send packet
+		 */
+		int tx_state;	
+		int numflags;
+		unsigned int bitstream;
+		unsigned char ptt;
+		int calibrate;
+		int slotcnt;
+
+		unsigned int bitbuf;
+		int numbits;
+		
+		int len;
+		unsigned char *bp;
+		unsigned char buffer[HDLCDRV_MAXFLEN+2];
+	} hdlctx;
+
+#ifdef HDLCDRV_DEBUG
+	struct hdlcdrv_bitbuffer bitbuf_channel;
+	struct hdlcdrv_bitbuffer bitbuf_hdlc;
+#endif /* HDLCDRV_DEBUG */
+
+	struct net_device_stats stats;
+	int ptt_keyed;
+
+	/* queued skb for transmission */
+	struct sk_buff *skb;
+};
+
+
+/* -------------------------------------------------------------------- */
+
+static inline int hdlcdrv_hbuf_full(struct hdlcdrv_hdlcbuffer *hb) 
+{
+	unsigned long flags;
+	int ret;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	ret = !((HDLCDRV_HDLCBUFFER - 1 + hb->rd - hb->wr) % HDLCDRV_HDLCBUFFER);
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return ret;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline int hdlcdrv_hbuf_empty(struct hdlcdrv_hdlcbuffer *hb)
+{
+	unsigned long flags;
+	int ret;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	ret = (hb->rd == hb->wr);
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return ret;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline unsigned short hdlcdrv_hbuf_get(struct hdlcdrv_hdlcbuffer *hb)
+{
+	unsigned long flags;
+	unsigned short val;
+	unsigned newr;
+
+	spin_lock_irqsave(&hb->lock, flags);
+	if (hb->rd == hb->wr)
+		val = 0;
+	else {
+		newr = (hb->rd+1) % HDLCDRV_HDLCBUFFER;
+		val = hb->buf[hb->rd];
+		hb->rd = newr;
+	}
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return val;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void hdlcdrv_hbuf_put(struct hdlcdrv_hdlcbuffer *hb, 
+				    unsigned short val)
+{
+	unsigned newp;
+	unsigned long flags;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	newp = (hb->wr+1) % HDLCDRV_HDLCBUFFER;
+	if (newp != hb->rd) { 
+		hb->buf[hb->wr] = val & 0xffff;
+		hb->wr = newp;
+	}
+	spin_unlock_irqrestore(&hb->lock, flags);
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void hdlcdrv_putbits(struct hdlcdrv_state *s, unsigned int bits)
+{
+	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, bits);
+}
+
+static inline unsigned int hdlcdrv_getbits(struct hdlcdrv_state *s)
+{
+	unsigned int ret;
+
+	if (hdlcdrv_hbuf_empty(&s->hdlctx.hbuf)) {
+		if (s->hdlctx.calibrate > 0)
+			s->hdlctx.calibrate--;
+		else
+			s->hdlctx.ptt = 0;
+		ret = 0;
+	} else 
+		ret = hdlcdrv_hbuf_get(&s->hdlctx.hbuf);
+#ifdef HDLCDRV_LOOPBACK
+	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, ret);
+#endif /* HDLCDRV_LOOPBACK */
+	return ret;
+}
+
+static inline void hdlcdrv_channelbit(struct hdlcdrv_state *s, unsigned int bit)
+{
+#ifdef HDLCDRV_DEBUG
+	hdlcdrv_add_bitbuffer(&s->bitbuf_channel, bit);
+#endif /* HDLCDRV_DEBUG */
+}
+
+static inline void hdlcdrv_setdcd(struct hdlcdrv_state *s, int dcd)
+{
+	s->hdlcrx.dcd = !!dcd;
+}
+
+static inline int hdlcdrv_ptt(struct hdlcdrv_state *s)
+{
+	return s->hdlctx.ptt || (s->hdlctx.calibrate > 0);
+}
+
+/* -------------------------------------------------------------------- */
+
+void hdlcdrv_receiver(struct net_device *, struct hdlcdrv_state *);
+void hdlcdrv_transmitter(struct net_device *, struct hdlcdrv_state *);
+void hdlcdrv_arbitrate(struct net_device *, struct hdlcdrv_state *);
+struct net_device *hdlcdrv_register(const struct hdlcdrv_ops *ops,
+				    unsigned int privsize, const char *ifname,
+				    unsigned int baseaddr, unsigned int irq, 
+				    unsigned int dma);
+void hdlcdrv_unregister(struct net_device *dev);
+
+/* -------------------------------------------------------------------- */
+
+
+
+#endif /* __KERNEL__ */
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdpu_features.h b/include/linux/hdpu_features.h
new file mode 100644
index 000000000000..6a8715431ae4
--- /dev/null
+++ b/include/linux/hdpu_features.h
@@ -0,0 +1,26 @@
+#include <linux/spinlock.h>
+
+struct cpustate_t {
+	spinlock_t lock;
+	int excl;
+        int open_count;
+	unsigned char cached_val;
+	int inited;
+	unsigned long *set_addr;
+	unsigned long *clr_addr;
+};
+
+
+#define HDPU_CPUSTATE_NAME "hdpu cpustate"
+#define HDPU_NEXUS_NAME "hdpu nexus"
+
+#define CPUSTATE_KERNEL_MAJOR  0x10
+
+#define CPUSTATE_KERNEL_INIT_DRV   0 /* CPU State Driver Initialized */
+#define CPUSTATE_KERNEL_INIT_PCI   1 /* 64360 PCI Busses Init */
+#define CPUSTATE_KERNEL_INIT_REG   2 /* 64360 Bridge Init */
+#define CPUSTATE_KERNEL_CPU1_KICK  3 /* Boot cpu 1 */
+#define CPUSTATE_KERNEL_CPU1_OK    4  /* Cpu 1 has checked in */
+#define CPUSTATE_KERNEL_OK         5 /* Terminal state */
+#define CPUSTATE_KERNEL_RESET   14 /* Board reset via SW*/
+#define CPUSTATE_KERNEL_HALT   15 /* Board halted via SW*/
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
new file mode 100644
index 000000000000..b5d660089de4
--- /dev/null
+++ b/include/linux/hdreg.h
@@ -0,0 +1,703 @@
+#ifndef _LINUX_HDREG_H
+#define _LINUX_HDREG_H
+
+#ifdef __KERNEL__
+#include <linux/ata.h>
+
+/*
+ * This file contains some defines for the AT-hd-controller.
+ * Various sources.
+ */
+
+/* ide.c has its own port definitions in "ide.h" */
+
+#define HD_IRQ		14
+
+/* Hd controller regs. Ref: IBM AT Bios-listing */
+#define HD_DATA		0x1f0		/* _CTL when writing */
+#define HD_ERROR	0x1f1		/* see err-bits */
+#define HD_NSECTOR	0x1f2		/* nr of sectors to read/write */
+#define HD_SECTOR	0x1f3		/* starting sector */
+#define HD_LCYL		0x1f4		/* starting cylinder */
+#define HD_HCYL		0x1f5		/* high byte of starting cyl */
+#define HD_CURRENT	0x1f6		/* 101dhhhh , d=drive, hhhh=head */
+#define HD_STATUS	0x1f7		/* see status-bits */
+#define HD_FEATURE	HD_ERROR	/* same io address, read=error, write=feature */
+#define HD_PRECOMP	HD_FEATURE	/* obsolete use of this port - predates IDE */
+#define HD_COMMAND	HD_STATUS	/* same io address, read=status, write=cmd */
+
+#define HD_CMD		0x3f6		/* used for resets */
+#define HD_ALTSTATUS	0x3f6		/* same as HD_STATUS but doesn't clear irq */
+
+/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
+
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define INDEX_STAT		0x02
+#define ECC_STAT		0x04	/* Corrected error */
+#define DRQ_STAT		0x08
+#define SEEK_STAT		0x10
+#define SRV_STAT		0x10
+#define WRERR_STAT		0x20
+#define READY_STAT		0x40
+#define BUSY_STAT		0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR		0x01	/* Bad address mark */
+#define TRK0_ERR		0x02	/* couldn't find track 0 */
+#define ABRT_ERR		0x04	/* Command aborted */
+#define MCR_ERR			0x08	/* media change request */
+#define ID_ERR			0x10	/* ID field not found */
+#define MC_ERR			0x20	/* media changed */
+#define ECC_ERR			0x40	/* Uncorrectable ECC error */
+#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
+#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD			0x01
+#define IO			0x02
+#define REL			0x04
+#define TAG_MASK		0xf8
+#endif /* __KERNEL__ */
+
+/*
+ * Command Header sizes for IOCTL commands
+ */
+
+#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(u8))
+#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(u8))
+#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(u8))
+
+#define IDE_DRIVE_TASK_INVALID		-1
+#define IDE_DRIVE_TASK_NO_DATA		0
+#define IDE_DRIVE_TASK_SET_XFER		1
+
+#define IDE_DRIVE_TASK_IN		2
+
+#define IDE_DRIVE_TASK_OUT		3
+#define IDE_DRIVE_TASK_RAW_WRITE	4
+
+/*
+ * Define standard taskfile in/out register
+ */
+#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
+#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
+#define IDE_HOB_STD_OUT_FLAGS		0x3C
+#define IDE_HOB_STD_IN_FLAGS		0x3C
+
+typedef unsigned char task_ioreg_t;
+typedef unsigned long sata_ioreg_t;
+
+typedef union ide_reg_valid_s {
+	unsigned all				: 16;
+	struct {
+		unsigned data			: 1;
+		unsigned error_feature		: 1;
+		unsigned sector			: 1;
+		unsigned nsector		: 1;
+		unsigned lcyl			: 1;
+		unsigned hcyl			: 1;
+		unsigned select			: 1;
+		unsigned status_command		: 1;
+
+		unsigned data_hob		: 1;
+		unsigned error_feature_hob	: 1;
+		unsigned sector_hob		: 1;
+		unsigned nsector_hob		: 1;
+		unsigned lcyl_hob		: 1;
+		unsigned hcyl_hob		: 1;
+		unsigned select_hob		: 1;
+		unsigned control_hob		: 1;
+	} b;
+} ide_reg_valid_t;
+
+typedef struct ide_task_request_s {
+	task_ioreg_t	io_ports[8];
+	task_ioreg_t	hob_ports[8];
+	ide_reg_valid_t	out_flags;
+	ide_reg_valid_t	in_flags;
+	int		data_phase;
+	int		req_cmd;
+	unsigned long	out_size;
+	unsigned long	in_size;
+} ide_task_request_t;
+
+typedef struct ide_ioctl_request_s {
+	ide_task_request_t	*task_request;
+	unsigned char		*out_buffer;
+	unsigned char		*in_buffer;
+} ide_ioctl_request_t;
+
+struct hd_drive_cmd_hdr {
+	task_ioreg_t command;
+	task_ioreg_t sector_number;
+	task_ioreg_t feature;
+	task_ioreg_t sector_count;
+};
+
+typedef struct hd_drive_task_hdr {
+	task_ioreg_t data;
+	task_ioreg_t feature;
+	task_ioreg_t sector_count;
+	task_ioreg_t sector_number;
+	task_ioreg_t low_cylinder;
+	task_ioreg_t high_cylinder;
+	task_ioreg_t device_head;
+	task_ioreg_t command;
+} task_struct_t;
+
+typedef struct hd_drive_hob_hdr {
+	task_ioreg_t data;
+	task_ioreg_t feature;
+	task_ioreg_t sector_count;
+	task_ioreg_t sector_number;
+	task_ioreg_t low_cylinder;
+	task_ioreg_t high_cylinder;
+	task_ioreg_t device_head;
+	task_ioreg_t control;
+} hob_struct_t;
+
+#define TASKFILE_INVALID		0x7fff
+#define TASKFILE_48			0x8000
+
+#define TASKFILE_NO_DATA		0x0000
+
+#define TASKFILE_IN			0x0001
+#define TASKFILE_MULTI_IN		0x0002
+
+#define TASKFILE_OUT			0x0004
+#define TASKFILE_MULTI_OUT		0x0008
+#define TASKFILE_IN_OUT			0x0010
+
+#define TASKFILE_IN_DMA			0x0020
+#define TASKFILE_OUT_DMA		0x0040
+#define TASKFILE_IN_DMAQ		0x0080
+#define TASKFILE_OUT_DMAQ		0x0100
+
+#define TASKFILE_P_IN			0x0200
+#define TASKFILE_P_OUT			0x0400
+#define TASKFILE_P_IN_DMA		0x0800
+#define TASKFILE_P_OUT_DMA		0x1000
+#define TASKFILE_P_IN_DMAQ		0x2000
+#define TASKFILE_P_OUT_DMAQ		0x4000
+
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+/*
+ *	0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/*
+ *	0x04->0x07 Reserved
+ */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+/*
+ *	0x09->0x0F Reserved
+ */
+#define WIN_RECAL			0x10
+#define WIN_RESTORE			WIN_RECAL
+/*
+ *	0x10->0x1F Reserved
+ */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG			0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/*
+ *	0x28
+ */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/*
+ *	0x2A->0x2F Reserved
+ */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG			0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/*
+ *	0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+/*
+ *	0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/*
+ *	0x43->0x4F Reserved
+ */
+#define WIN_FORMAT			0x50
+/*
+ *	0x51->0x5F Reserved
+ */
+#define WIN_INIT			0x60
+/*
+ *	0x61->0x5F Reserved
+ */
+#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
+
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define WIN_STANDBY2			0x96
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+/*
+ *	0x9A VENDOR
+ */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ERASE_SECTORS		0xC0
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT			0xDC
+#define WIN_PREBOOT 			0xDD
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
+	/* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* WIN_SMART sub-commands */
+
+#define SMART_READ_VALUES		0xD0
+#define SMART_READ_THRESHOLDS		0xD1
+#define SMART_AUTOSAVE			0xD2
+#define SMART_SAVE			0xD3
+#define SMART_IMMEDIATE_OFFLINE		0xD4
+#define SMART_READ_LOG_SECTOR		0xD5
+#define SMART_WRITE_LOG_SECTOR		0xD6
+#define SMART_WRITE_THRESHOLDS		0xD7
+#define SMART_ENABLE			0xD8
+#define SMART_DISABLE			0xD9
+#define SMART_STATUS			0xDA
+#define SMART_AUTO_OFFLINE		0xDB
+
+/* Password used in TF4 & TF5 executing SMART commands */
+
+#define SMART_LCYL_PASS			0x4F
+#define SMART_HCYL_PASS			0xC2
+
+/* WIN_SETFEATURES sub-commands */
+#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
+#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
+#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
+#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
+#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
+#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
+#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
+#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
+#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
+#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
+#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
+#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
+#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
+#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
+#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
+#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
+#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
+#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
+#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
+#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
+#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
+#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
+#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
+#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
+#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
+#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Lenght of 4 bytes */
+#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
+#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
+#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
+#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
+#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */
+
+/* WIN_SECURITY sub-commands */
+
+#define SECURITY_SET_PASSWORD		0xBA
+#define SECURITY_UNLOCK			0xBB
+#define SECURITY_ERASE_PREPARE		0xBC
+#define SECURITY_ERASE_UNIT		0xBD
+#define SECURITY_FREEZE_LOCK		0xBE
+#define SECURITY_DISABLE_PASSWORD	0xBF
+
+struct hd_geometry {
+      unsigned char heads;
+      unsigned char sectors;
+      unsigned short cylinders;
+      unsigned long start;
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
+#define HDIO_GETGEO		0x0301	/* get device geometry */
+#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
+#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
+#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */
+
+#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */
+
+#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
+#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
+#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
+#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
+#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
+#define HDIO_GET_NICE		0x030c	/* get nice flags */
+#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
+#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
+#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
+#define	HDIO_GET_ADDRESS	0x0310	/* */
+
+#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
+#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
+#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
+#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
+#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
+#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
+#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
+
+/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
+#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
+#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
+#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
+#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
+#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
+#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
+#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
+#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
+#define HDIO_SET_NICE		0x0329	/* set nice flags */
+#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
+#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
+#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
+#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
+#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
+#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
+
+/* bus states */
+enum {
+	BUSSTATE_OFF = 0,
+	BUSSTATE_ON,
+	BUSSTATE_TRISTATE
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
+/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
+/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
+/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
+/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
+
+#define __NEW_HD_DRIVE_ID
+
+/*
+ * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
+ *
+ * If you change something here, please remember to update fix_driveid() in
+ * ide/probe.c.
+ */
+struct hd_driveid {
+	unsigned short	config;		/* lots of obsolete bit flags */
+	unsigned short	cyls;		/* Obsolete, "physical" cyls */
+	unsigned short	reserved2;	/* reserved (word 2) */
+	unsigned short	heads;		/* Obsolete, "physical" heads */
+	unsigned short	track_bytes;	/* unformatted bytes per track */
+	unsigned short	sector_bytes;	/* unformatted bytes per sector */
+	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
+	unsigned short	vendor0;	/* vendor unique */
+	unsigned short	vendor1;	/* vendor unique */
+	unsigned short	vendor2;	/* Retired vendor unique */
+	unsigned char	serial_no[20];	/* 0 = not_specified */
+	unsigned short	buf_type;	/* Retired */
+	unsigned short	buf_size;	/* Retired, 512 byte increments
+					 * 0 = not_specified
+					 */
+	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
+	unsigned char	fw_rev[8];	/* 0 = not_specified */
+	unsigned char	model[40];	/* 0 = not_specified */
+	unsigned char	max_multsect;	/* 0=not_implemented */
+	unsigned char	vendor3;	/* vendor unique */
+	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
+	unsigned char	vendor4;	/* vendor unique */
+	unsigned char	capability;	/* (upper byte of word 49)
+					 *  3:	IORDYsup
+					 *  2:	IORDYsw
+					 *  1:	LBA
+					 *  0:	DMA
+					 */
+	unsigned short	reserved50;	/* reserved (word 50) */
+	unsigned char	vendor5;	/* Obsolete, vendor unique */
+	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned char	vendor6;	/* Obsolete, vendor unique */
+	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned short	field_valid;	/* (word 53)
+					 *  2:	ultra_ok	word  88
+					 *  1:	eide_ok		words 64-70
+					 *  0:	cur_ok		words 54-58
+					 */
+	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
+	unsigned short	cur_heads;	/* Obsolete, l heads */
+	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
+	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
+	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
+	unsigned char	multsect;	/* current multiple sector count */
+	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
+	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
+	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
+	unsigned short	dma_mword;	/* multiple-word dma info */
+	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
+	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
+	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
+	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
+	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
+	unsigned short	words69_70[2];	/* reserved words 69-70
+					 * future command overlap and queuing
+					 */
+	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
+	unsigned short	words71_74[4];	/* reserved words 71-74
+					 * for IDENTIFY PACKET DEVICE command
+					 */
+	unsigned short  queue_depth;	/* (word 75)
+					 * 15:5	reserved
+					 *  4:0	Maximum queue depth -1
+					 */
+	unsigned short  words76_79[4];	/* reserved words 76-79 */
+	unsigned short  major_rev_num;	/* (word 80) */
+	unsigned short  minor_rev_num;	/* (word 81) */
+	unsigned short  command_set_1;	/* (word 82) supported
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  command_set_2;	/* (word 83)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  cfsse;		/* (word 84)
+					 * cmd set-feature supported extensions
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging
+					 *  4:	Streaming Feature Set
+					 *  3:	Media Card Pass Through
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  cfs_enable_1;	/* (word 85)
+					 * command set-feature enabled
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  cfs_enable_2;	/* (word 86)
+					 * command set-feature enabled
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  csf_default;	/* (word 87)
+					 * command set-feature default
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging enabled
+					 *  4:	Valid CONFIGURE STREAM executed
+					 *  3:	Media Card Pass Through enabled
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  dma_ultra;	/* (word 88) */
+	unsigned short	trseuc;		/* time required for security erase */
+	unsigned short	trsEuc;		/* time required for enhanced erase */
+	unsigned short	CurAPMvalues;	/* current APM values */
+	unsigned short	mprc;		/* master password revision code */
+	unsigned short	hw_config;	/* hardware config (word 93)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:
+					 * 12:
+					 * 11:
+					 * 10:
+					 *  9:
+					 *  8:
+					 *  7:
+					 *  6:
+					 *  5:
+					 *  4:
+					 *  3:
+					 *  2:
+					 *  1:
+					 *  0:	Shall be ONE
+					 */
+	unsigned short	acoustic;	/* (word 94)
+					 * 15:8	Vendor's recommended value
+					 *  7:0	current value
+					 */
+	unsigned short	msrqs;		/* min stream request size */
+	unsigned short	sxfert;		/* stream transfer time */
+	unsigned short	sal;		/* stream access latency */
+	unsigned int	spg;		/* stream performance granularity */
+	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
+	unsigned short	words104_125[22];/* reserved words 104-125 */
+	unsigned short	last_lun;	/* (word 126) */
+	unsigned short	word127;	/* (word 127) Feature Set
+					 * Removable Media Notification
+					 * 15:2	reserved
+					 *  1:0	00 = not supported
+					 *	01 = supported
+					 *	10 = reserved
+					 *	11 = reserved
+					 */
+	unsigned short	dlf;		/* (word 128)
+					 * device lock function
+					 * 15:9	reserved
+					 *  8	security level 1:max 0:high
+					 *  7:6	reserved
+					 *  5	enhanced erase
+					 *  4	expire
+					 *  3	frozen
+					 *  2	locked
+					 *  1	en/disabled
+					 *  0	capability
+					 */
+	unsigned short  csfo;		/*  (word 129)
+					 * current set features options
+					 * 15:4	reserved
+					 *  3:	auto reassign
+					 *  2:	reverting
+					 *  1:	read-look-ahead
+					 *  0:	write cache
+					 */
+	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
+	unsigned short	word156;	/* reserved vendor word 156 */
+	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
+	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
+					 * 15 word 160 supported
+					 * 14 reserved
+					 * 13
+					 * 12
+					 * 11:0
+					 */
+	unsigned short	words161_175[15];/* Reserved for CFA */
+	unsigned short	words176_205[30];/* Current Media Serial Number */
+	unsigned short	words206_254[49];/* reserved words 206-254 */
+	unsigned short	integrity_word;	/* (word 255)
+					 * 15:8 Checksum
+					 *  7:0 Signature
+					 */
+};
+
+/*
+ * IDE "nice" flags. These are used on a per drive basis to determine
+ * when to be nice and give more bandwidth to the other devices which
+ * share the same IDE bus.
+ */
+#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
+#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
+#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
+#define IDE_NICE_1		(3)	/* when probably won't affect us much */
+#define IDE_NICE_2		(4)	/* when we know it's on our expense */
+
+#endif	/* _LINUX_HDREG_H */
diff --git a/include/linux/hdsmart.h b/include/linux/hdsmart.h
new file mode 100644
index 000000000000..7974a47fe582
--- /dev/null
+++ b/include/linux/hdsmart.h
@@ -0,0 +1,124 @@
+/*
+ * linux/include/linux/hdsmart.h
+ *
+ * Copyright (C) 1999-2000	Michael Cornwell <cornwell@acm.org>
+ * Copyright (C) 2000		Andre Hedrick <andre@linux-ide.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_HDSMART_H
+#define _LINUX_HDSMART_H
+
+#define OFFLINE_FULL_SCAN		0
+#define SHORT_SELF_TEST			1
+#define EXTEND_SELF_TEST		2
+#define SHORT_CAPTIVE_SELF_TEST		129
+#define EXTEND_CAPTIVE_SELF_TEST	130
+
+/* smart_attribute is the vendor specific in SFF-8035 spec */
+typedef struct ata_smart_attribute_s {
+	unsigned char			id;
+	unsigned short			status_flag;
+	unsigned char			normalized;
+	unsigned char			worse_normal;
+	unsigned char			raw[6];
+	unsigned char			reserv;
+} __attribute__ ((packed)) ata_smart_attribute_t;
+
+/* smart_values is format of the read drive Atrribute command */
+typedef struct ata_smart_values_s {
+	unsigned short			revnumber;
+	ata_smart_attribute_t		vendor_attributes [30];
+        unsigned char			offline_data_collection_status;
+        unsigned char			self_test_exec_status;
+	unsigned short			total_time_to_complete_off_line;
+	unsigned char			vendor_specific_366;
+	unsigned char			offline_data_collection_capability;
+	unsigned short			smart_capability;
+	unsigned char			errorlog_capability;
+	unsigned char			vendor_specific_371;
+	unsigned char			short_test_completion_time;
+	unsigned char			extend_test_completion_time;
+	unsigned char			reserved_374_385 [12];
+	unsigned char			vendor_specific_386_509 [125];
+	unsigned char			chksum;
+} __attribute__ ((packed)) ata_smart_values_t;
+
+/* Smart Threshold data structures */
+/* Vendor attribute of SMART Threshold */
+typedef struct ata_smart_threshold_entry_s {
+	unsigned char			id;
+	unsigned char			normalized_threshold;
+	unsigned char			reserved[10];
+} __attribute__ ((packed)) ata_smart_threshold_entry_t;
+
+/* Format of Read SMART THreshold Command */
+typedef struct ata_smart_thresholds_s {
+	unsigned short			revnumber;
+	ata_smart_threshold_entry_t	thres_entries[30];
+	unsigned char			reserved[149];
+	unsigned char			chksum;
+} __attribute__ ((packed)) ata_smart_thresholds_t;
+
+typedef struct ata_smart_errorlog_command_struct_s {
+	unsigned char			devicecontrolreg;
+	unsigned char			featuresreg;
+	unsigned char			sector_count;
+	unsigned char			sector_number;
+	unsigned char			cylinder_low;
+	unsigned char			cylinder_high;
+	unsigned char			drive_head;
+	unsigned char			commandreg;
+	unsigned int			timestamp;
+} __attribute__ ((packed)) ata_smart_errorlog_command_struct_t;
+
+typedef struct ata_smart_errorlog_error_struct_s {
+	unsigned char			error_condition;
+	unsigned char			extended_error[14];
+	unsigned char			state;
+	unsigned short			timestamp;
+} __attribute__ ((packed)) ata_smart_errorlog_error_struct_t;
+
+typedef struct ata_smart_errorlog_struct_s {
+	ata_smart_errorlog_command_struct_t	commands[6];
+	ata_smart_errorlog_error_struct_t	error_struct;
+} __attribute__ ((packed)) ata_smart_errorlog_struct_t;
+
+typedef struct ata_smart_errorlog_s {
+	unsigned char			revnumber;
+	unsigned char			error_log_pointer;
+	ata_smart_errorlog_struct_t	errorlog_struct[5];
+	unsigned short			ata_error_count;
+	unsigned short			non_fatal_count;
+	unsigned short			drive_timeout_count;
+	unsigned char			reserved[53];
+	unsigned char			chksum;
+} __attribute__ ((packed)) ata_smart_errorlog_t;
+
+typedef struct ata_smart_selftestlog_struct_s {
+	unsigned char			selftestnumber;
+	unsigned char			selfteststatus;
+	unsigned short			timestamp;
+	unsigned char			selftestfailurecheckpoint;
+	unsigned int			lbafirstfailure;
+	unsigned char			vendorspecific[15];
+} __attribute__ ((packed)) ata_smart_selftestlog_struct_t;
+
+typedef struct ata_smart_selftestlog_s {
+	unsigned short			revnumber;
+	ata_smart_selftestlog_struct_t	selftest_struct[21];
+	unsigned char			vendorspecific[2];
+	unsigned char			mostrecenttest;
+	unsigned char			resevered[2];
+	unsigned char			chksum;
+} __attribute__ ((packed)) ata_smart_selftestlog_t;
+
+#endif	/* _LINUX_HDSMART_H */
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
new file mode 100644
index 000000000000..945ba1ad14ac
--- /dev/null
+++ b/include/linux/hiddev.h
@@ -0,0 +1,240 @@
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
+
+/*
+ * $Id: hiddev.h,v 1.2 2001/04/26 11:26:09 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+	unsigned hid;
+	signed int value;
+};
+
+struct hiddev_devinfo {
+	__u32 bustype;
+	__u32 busnum;
+	__u32 devnum;
+	__u32 ifnum;
+	__s16 vendor;
+	__s16 product;
+	__s16 version;
+	__u32 num_applications;
+};
+
+struct hiddev_collection_info {
+	__u32 index;
+	__u32 type;
+	__u32 usage;
+	__u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+	__s32 index;
+	char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
+ * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
+ * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
+ * successful GUSAGE call to save time.  To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST   0x00000100
+#define HID_REPORT_ID_NEXT    0x00000200
+#define HID_REPORT_ID_MASK    0x000000ff
+#define HID_REPORT_ID_MAX     0x000000ff
+
+#define HID_REPORT_TYPE_INPUT	1
+#define HID_REPORT_TYPE_OUTPUT	2
+#define HID_REPORT_TYPE_FEATURE	3
+#define HID_REPORT_TYPE_MIN     1
+#define HID_REPORT_TYPE_MAX     3
+
+struct hiddev_field_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 maxusage;
+	__u32 flags;
+	__u32 physical;		/* physical usage for this field */
+	__u32 logical;		/* logical usage for this field */
+	__u32 application;		/* application usage for this field */
+	__s32 logical_minimum;
+	__s32 logical_maximum;
+	__s32 physical_minimum;
+	__s32 physical_maximum;
+	__u32 unit_exponent;
+	__u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT		0x001
+#define HID_FIELD_VARIABLE		0x002
+#define HID_FIELD_RELATIVE		0x004
+#define HID_FIELD_WRAP			0x008	
+#define HID_FIELD_NONLINEAR		0x010
+#define HID_FIELD_NO_PREFERRED		0x020
+#define HID_FIELD_NULL_STATE		0x040
+#define HID_FIELD_VOLATILE		0x080
+#define HID_FIELD_BUFFERED_BYTE		0x100
+
+struct hiddev_usage_ref {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 usage_index;
+	__u32 usage_code;
+	__s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+	struct hiddev_usage_ref uref;
+	__u32 num_values;
+	__s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device 
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION		0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION		_IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION	_IO('H', 0x02)
+#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT	_IO('H', 0x05)
+#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
+#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/* 
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF	0x1
+#define HIDDEV_FLAG_REPORT	0x2
+#define HIDDEV_FLAGS		0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the 
+ * following:
+ *
+ *  rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ *  rinfo.report_id = HID_REPORT_ID_FIRST;
+ *  ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ *  while (ret >= 0) {
+ *      for (i = 0; i < rinfo.num_fields; i++) { 
+ *	    finfo.report_type = rinfo.report_type;
+ *          finfo.report_id = rinfo.report_id;
+ *          finfo.field_index = i;
+ *          ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ *          for (j = 0; j < finfo.maxusage; j++) {
+ *              uref.field_index = i;
+ *		uref.usage_index = j;
+ *		ioctl(fd, HIDIOCGUCODE, &uref);
+ *		ioctl(fd, HIDIOCGUSAGE, &uref);
+ *          }
+ *	}
+ *	rinfo.report_id |= HID_REPORT_ID_NEXT;
+ *	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *  }
+ */
+
+
+#ifdef __KERNEL__
+
+/*
+ * In-kernel definitions.
+ */
+
+struct hid_device;
+struct hid_usage;
+struct hid_field;
+struct hid_report;
+
+#ifdef CONFIG_USB_HIDDEV
+int hiddev_connect(struct hid_device *);
+void hiddev_disconnect(struct hid_device *);
+void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
+		      struct hid_usage *usage, __s32 value, struct pt_regs *regs);
+void hiddev_report_event(struct hid_device *hid, struct hid_report *report);
+int __init hiddev_init(void);
+void hiddev_exit(void);
+#else
+static inline int hiddev_connect(struct hid_device *hid) { return -1; }
+static inline void hiddev_disconnect(struct hid_device *hid) { }
+static inline void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
+		      struct hid_usage *usage, __s32 value, struct pt_regs *regs) { }
+static inline void hiddev_report_event(struct hid_device *hid, struct hid_report *report) { }
+static inline int hiddev_init(void) { return 0; }
+static inline void hiddev_exit(void) { }
+#endif
+
+#endif
+#endif
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
new file mode 100644
index 000000000000..2a7e6c65c882
--- /dev/null
+++ b/include/linux/highmem.h
@@ -0,0 +1,104 @@
+#ifndef _LINUX_HIGHMEM_H
+#define _LINUX_HIGHMEM_H
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_HIGHMEM
+
+#include <asm/highmem.h>
+
+/* declarations for linux/mm/highmem.c */
+unsigned int nr_free_highpages(void);
+
+#else /* CONFIG_HIGHMEM */
+
+static inline unsigned int nr_free_highpages(void) { return 0; }
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	return page_address(page);
+}
+
+#define kunmap(page) do { (void) (page); } while (0)
+
+#define kmap_atomic(page, idx)		page_address(page)
+#define kunmap_atomic(addr, idx)	do { } while (0)
+#define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
+
+#endif /* CONFIG_HIGHMEM */
+
+/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *addr = kmap_atomic(page, KM_USER0);
+	clear_user_page(addr, vaddr, page);
+	kunmap_atomic(addr, KM_USER0);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+
+#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+static inline struct page *
+alloc_zeroed_user_highpage(struct vm_area_struct *vma, unsigned long vaddr)
+{
+	struct page *page = alloc_page_vma(GFP_HIGHUSER, vma, vaddr);
+
+	if (page)
+		clear_user_highpage(page, vaddr);
+
+	return page;
+}
+#endif
+
+static inline void clear_highpage(struct page *page)
+{
+	void *kaddr = kmap_atomic(page, KM_USER0);
+	clear_page(kaddr);
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+/*
+ * Same but also flushes aliased cache contents to RAM.
+ */
+static inline void memclear_highpage_flush(struct page *page, unsigned int offset, unsigned int size)
+{
+	void *kaddr;
+
+	BUG_ON(offset + size > PAGE_SIZE);
+
+	kaddr = kmap_atomic(page, KM_USER0);
+	memset((char *)kaddr + offset, 0, size);
+	flush_dcache_page(page);
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+static inline void copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr)
+{
+	char *vfrom, *vto;
+
+	vfrom = kmap_atomic(from, KM_USER0);
+	vto = kmap_atomic(to, KM_USER1);
+	copy_user_page(vto, vfrom, vaddr, to);
+	kunmap_atomic(vfrom, KM_USER0);
+	kunmap_atomic(vto, KM_USER1);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+
+static inline void copy_highpage(struct page *to, struct page *from)
+{
+	char *vfrom, *vto;
+
+	vfrom = kmap_atomic(from, KM_USER0);
+	vto = kmap_atomic(to, KM_USER1);
+	copy_page(vto, vfrom);
+	kunmap_atomic(vfrom, KM_USER0);
+	kunmap_atomic(vto, KM_USER1);
+}
+
+#endif /* _LINUX_HIGHMEM_H */
diff --git a/include/linux/highuid.h b/include/linux/highuid.h
new file mode 100644
index 000000000000..53ecac3905e8
--- /dev/null
+++ b/include/linux/highuid.h
@@ -0,0 +1,98 @@
+#ifndef _LINUX_HIGHUID_H
+#define _LINUX_HIGHUID_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/*
+ * general notes:
+ *
+ * CONFIG_UID16 is defined if the given architecture needs to
+ * support backwards compatibility for old system calls.
+ *
+ * kernel code should use uid_t and gid_t at all times when dealing with
+ * kernel-private data.
+ *
+ * old_uid_t and old_gid_t should only be different if CONFIG_UID16 is
+ * defined, else the platform should provide dummy typedefs for them
+ * such that they are equivalent to __kernel_{u,g}id_t.
+ *
+ * uid16_t and gid16_t are used on all architectures. (when dealing
+ * with structures hard coded to 16 bits, such as in filesystems)
+ */
+
+
+/*
+ * This is the "overflow" UID and GID. They are used to signify uid/gid
+ * overflow to old programs when they request uid/gid information but are
+ * using the old 16 bit interfaces.
+ * When you run a libc5 program, it will think that all highuid files or
+ * processes are owned by this uid/gid.
+ * The idea is that it's better to do so than possibly return 0 in lieu of
+ * 65536, etc.
+ */
+
+extern int overflowuid;
+extern int overflowgid;
+
+extern void __bad_uid(void);
+extern void __bad_gid(void);
+
+#define DEFAULT_OVERFLOWUID	65534
+#define DEFAULT_OVERFLOWGID	65534
+
+#ifdef CONFIG_UID16
+
+/* prevent uid mod 65536 effect by returning a default value for high UIDs */
+#define high2lowuid(uid) ((uid) & ~0xFFFF ? (old_uid_t)overflowuid : (old_uid_t)(uid))
+#define high2lowgid(gid) ((gid) & ~0xFFFF ? (old_gid_t)overflowgid : (old_gid_t)(gid))
+/*
+ * -1 is different in 16 bits than it is in 32 bits
+ * these macros are used by chown(), setreuid(), ...,
+ */
+#define low2highuid(uid) ((uid) == (old_uid_t)-1 ? (uid_t)-1 : (uid_t)(uid))
+#define low2highgid(gid) ((gid) == (old_gid_t)-1 ? (gid_t)-1 : (gid_t)(gid))
+
+#define __convert_uid(size, uid) \
+	(size >= sizeof(uid) ? (uid) : high2lowuid(uid))
+#define __convert_gid(size, gid) \
+	(size >= sizeof(gid) ? (gid) : high2lowgid(gid))
+	
+
+#else
+
+#define __convert_uid(size, uid) (uid)
+#define __convert_gid(size, gid) (gid)
+
+#endif /* !CONFIG_UID16 */
+
+/* uid/gid input should be always 32bit uid_t */
+#define SET_UID(var, uid) do { (var) = __convert_uid(sizeof(var), (uid)); } while (0)
+#define SET_GID(var, gid) do { (var) = __convert_gid(sizeof(var), (gid)); } while (0)
+
+/*
+ * Everything below this line is needed on all architectures, to deal with
+ * filesystems that only store 16 bits of the UID/GID, etc.
+ */
+
+/*
+ * This is the UID and GID that will get written to disk if a filesystem
+ * only supports 16-bit UIDs and the kernel has a high UID/GID to write
+ */
+extern int fs_overflowuid;
+extern int fs_overflowgid;
+
+#define DEFAULT_FS_OVERFLOWUID	65534
+#define DEFAULT_FS_OVERFLOWGID	65534
+
+/*
+ * Since these macros are used in architectures that only need limited
+ * 16-bit UID back compatibility, we won't use old_uid_t and old_gid_t
+ */
+#define fs_high2lowuid(uid) ((uid) & ~0xFFFF ? (uid16_t)fs_overflowuid : (uid16_t)(uid))
+#define fs_high2lowgid(gid) ((gid) & ~0xFFFF ? (gid16_t)fs_overflowgid : (gid16_t)(gid))
+
+#define low_16_bits(x)	((x) & 0xFFFF)
+#define high_16_bits(x)	(((x) & 0xFFFF0000) >> 16)
+
+#endif /* _LINUX_HIGHUID_H */
diff --git a/include/linux/hippidevice.h b/include/linux/hippidevice.h
new file mode 100644
index 000000000000..89b3a4a5b761
--- /dev/null
+++ b/include/linux/hippidevice.h
@@ -0,0 +1,35 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the HIPPI handlers.
+ *
+ * Version:	@(#)hippidevice.h	1.0.0	05/26/97
+ *
+ * Author:	Jes Sorensen, <Jes.Sorensen@cern.ch>
+ *
+ *		hippidevice.h is based on previous fddidevice.h work by
+ *			Ross Biro, <bir7@leland.Stanford.Edu>
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *			Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_HIPPIDEVICE_H
+#define _LINUX_HIPPIDEVICE_H
+
+#include <linux/if_hippi.h>
+
+#ifdef __KERNEL__
+extern unsigned short hippi_type_trans(struct sk_buff *skb,
+				       struct net_device *dev);
+
+extern struct net_device *alloc_hippi_dev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_HIPPIDEVICE_H */
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
new file mode 100644
index 000000000000..27238194b212
--- /dev/null
+++ b/include/linux/hpet.h
@@ -0,0 +1,136 @@
+#ifndef	__HPET__
+#define	__HPET__ 1
+
+#include <linux/compiler.h>
+
+/*
+ * Offsets into HPET Registers
+ */
+
+struct hpet {
+	u64 hpet_cap;		/* capabilities */
+	u64 res0;		/* reserved */
+	u64 hpet_config;	/* configuration */
+	u64 res1;		/* reserved */
+	u64 hpet_isr;		/* interrupt status reg */
+	u64 res2[25];		/* reserved */
+	union {			/* main counter */
+		u64 _hpet_mc64;
+		u32 _hpet_mc32;
+		unsigned long _hpet_mc;
+	} _u0;
+	u64 res3;		/* reserved */
+	struct hpet_timer {
+		u64 hpet_config;	/* configuration/cap */
+		union {		/* timer compare register */
+			u64 _hpet_hc64;
+			u32 _hpet_hc32;
+			unsigned long _hpet_compare;
+		} _u1;
+		u64 hpet_fsb[2];	/* FSB route */
+	} hpet_timers[1];
+};
+
+#define	hpet_mc		_u0._hpet_mc
+#define	hpet_compare	_u1._hpet_compare
+
+#define	HPET_MAX_TIMERS	(32)
+
+/*
+ * HPET general capabilities register
+ */
+
+#define	HPET_COUNTER_CLK_PERIOD_MASK	(0xffffffff00000000ULL)
+#define	HPET_COUNTER_CLK_PERIOD_SHIFT	(32UL)
+#define	HPET_VENDOR_ID_MASK		(0x00000000ffff0000ULL)
+#define	HPET_VENDOR_ID_SHIFT		(16ULL)
+#define	HPET_LEG_RT_CAP_MASK		(0x8000)
+#define	HPET_COUNTER_SIZE_MASK		(0x2000)
+#define	HPET_NUM_TIM_CAP_MASK		(0x1f00)
+#define	HPET_NUM_TIM_CAP_SHIFT		(8ULL)
+
+/*
+ * HPET general configuration register
+ */
+
+#define	HPET_LEG_RT_CNF_MASK		(2UL)
+#define	HPET_ENABLE_CNF_MASK		(1UL)
+
+
+/*
+ * Timer configuration register
+ */
+
+#define	Tn_INT_ROUTE_CAP_MASK		(0xffffffff00000000ULL)
+#define	Tn_INI_ROUTE_CAP_SHIFT		(32UL)
+#define	Tn_FSB_INT_DELCAP_MASK		(0x8000UL)
+#define	Tn_FSB_INT_DELCAP_SHIFT		(15)
+#define	Tn_FSB_EN_CNF_MASK		(0x4000UL)
+#define	Tn_FSB_EN_CNF_SHIFT		(14)
+#define	Tn_INT_ROUTE_CNF_MASK		(0x3e00UL)
+#define	Tn_INT_ROUTE_CNF_SHIFT		(9)
+#define	Tn_32MODE_CNF_MASK		(0x0100UL)
+#define	Tn_VAL_SET_CNF_MASK		(0x0040UL)
+#define	Tn_SIZE_CAP_MASK		(0x0020UL)
+#define	Tn_PER_INT_CAP_MASK		(0x0010UL)
+#define	Tn_TYPE_CNF_MASK		(0x0008UL)
+#define	Tn_INT_ENB_CNF_MASK		(0x0004UL)
+#define	Tn_INT_TYPE_CNF_MASK		(0x0002UL)
+
+/*
+ * Timer FSB Interrupt Route Register
+ */
+
+#define	Tn_FSB_INT_ADDR_MASK		(0xffffffff00000000ULL)
+#define	Tn_FSB_INT_ADDR_SHIFT		(32UL)
+#define	Tn_FSB_INT_VAL_MASK		(0x00000000ffffffffULL)
+
+struct hpet_info {
+	unsigned long hi_ireqfreq;	/* Hz */
+	unsigned long hi_flags;	/* information */
+	unsigned short hi_hpet;
+	unsigned short hi_timer;
+};
+
+#define	HPET_INFO_PERIODIC	0x0001	/* timer is periodic */
+
+#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
+#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
+#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
+#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
+#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
+#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
+
+/*
+ * exported interfaces
+ */
+
+struct hpet_task {
+	void (*ht_func) (void *);
+	void *ht_data;
+	void *ht_opaque;
+};
+
+struct hpet_data {
+	unsigned long hd_phys_address;
+	void __iomem *hd_address;
+	unsigned short hd_nirqs;
+	unsigned short hd_flags;
+	unsigned int hd_state;	/* timer allocated */
+	unsigned int hd_irq[HPET_MAX_TIMERS];
+};
+
+#define	HPET_DATA_PLATFORM	0x0001	/* platform call to hpet_alloc */
+
+static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
+{
+	hd->hd_state |= (1 << timer);
+	return;
+}
+
+int hpet_alloc(struct hpet_data *);
+int hpet_register(struct hpet_task *, int);
+int hpet_unregister(struct hpet_task *);
+int hpet_control(struct hpet_task *, unsigned int, unsigned long);
+
+#endif				/* !__HPET__ */
diff --git a/include/linux/hpfs_fs.h b/include/linux/hpfs_fs.h
new file mode 100644
index 000000000000..a5028dd94d31
--- /dev/null
+++ b/include/linux/hpfs_fs.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_HPFS_FS_H
+#define _LINUX_HPFS_FS_H
+
+/* HPFS magic number (word 0 of block 16) */
+
+#define HPFS_SUPER_MAGIC 0xf995e849
+
+#endif
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
new file mode 100644
index 000000000000..ae45676d27ba
--- /dev/null
+++ b/include/linux/hugetlb.h
@@ -0,0 +1,142 @@
+#ifndef _LINUX_HUGETLB_H
+#define _LINUX_HUGETLB_H
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#include <linux/mempolicy.h>
+
+struct ctl_table;
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+	return vma->vm_flags & VM_HUGETLB;
+}
+
+int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
+int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
+int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int);
+void zap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
+void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
+int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
+int hugetlb_report_meminfo(char *);
+int hugetlb_report_node_meminfo(int, char *);
+int is_hugepage_mem_enough(size_t);
+unsigned long hugetlb_total_pages(void);
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+			      int write);
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+				pmd_t *pmd, int write);
+int is_aligned_hugepage_range(unsigned long addr, unsigned long len);
+int pmd_huge(pmd_t pmd);
+struct page *alloc_huge_page(void);
+void free_huge_page(struct page *);
+
+extern unsigned long max_huge_pages;
+extern const unsigned long hugetlb_zero, hugetlb_infinity;
+extern int sysctl_hugetlb_shm_group;
+
+#ifndef ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#define is_hugepage_only_range(mm, addr, len)	0
+#define hugetlb_free_pgtables(tlb, prev, start, end) do { } while (0)
+#endif
+
+#ifndef ARCH_HAS_PREPARE_HUGEPAGE_RANGE
+#define prepare_hugepage_range(addr, len)	\
+	is_aligned_hugepage_range(addr, len)
+#else
+int prepare_hugepage_range(unsigned long addr, unsigned long len);
+#endif
+
+#else /* !CONFIG_HUGETLB_PAGE */
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+	return 0;
+}
+static inline unsigned long hugetlb_total_pages(void)
+{
+	return 0;
+}
+
+#define follow_hugetlb_page(m,v,p,vs,a,b,i)	({ BUG(); 0; })
+#define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
+#define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
+#define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
+#define zap_hugepage_range(vma, start, len)	BUG()
+#define unmap_hugepage_range(vma, start, end)	BUG()
+#define is_hugepage_mem_enough(size)		0
+#define hugetlb_report_meminfo(buf)		0
+#define hugetlb_report_node_meminfo(n, buf)	0
+#define follow_huge_pmd(mm, addr, pmd, write)	NULL
+#define is_aligned_hugepage_range(addr, len)	0
+#define prepare_hugepage_range(addr, len)	(-EINVAL)
+#define pmd_huge(x)	0
+#define is_hugepage_only_range(mm, addr, len)	0
+#define hugetlb_free_pgtables(tlb, prev, start, end) do { } while (0)
+#define alloc_huge_page()			({ NULL; })
+#define free_huge_page(p)			({ (void)(p); BUG(); })
+
+#ifndef HPAGE_MASK
+#define HPAGE_MASK	0		/* Keep the compiler happy */
+#define HPAGE_SIZE	0
+#endif
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+#ifdef CONFIG_HUGETLBFS
+struct hugetlbfs_config {
+	uid_t   uid;
+	gid_t   gid;
+	umode_t mode;
+	long	nr_blocks;
+	long	nr_inodes;
+};
+
+struct hugetlbfs_sb_info {
+	long	max_blocks;   /* blocks allowed */
+	long	free_blocks;  /* blocks free */
+	long	max_inodes;   /* inodes allowed */
+	long	free_inodes;  /* inodes free */
+	spinlock_t	stat_lock;
+};
+
+
+struct hugetlbfs_inode_info {
+	struct shared_policy policy;
+	struct inode vfs_inode;
+};
+
+static inline struct hugetlbfs_inode_info *HUGETLBFS_I(struct inode *inode)
+{
+	return container_of(inode, struct hugetlbfs_inode_info, vfs_inode);
+}
+
+static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+extern struct file_operations hugetlbfs_file_operations;
+extern struct vm_operations_struct hugetlb_vm_ops;
+struct file *hugetlb_zero_setup(size_t);
+int hugetlb_get_quota(struct address_space *mapping);
+void hugetlb_put_quota(struct address_space *mapping);
+
+static inline int is_file_hugepages(struct file *file)
+{
+	return file->f_op == &hugetlbfs_file_operations;
+}
+
+static inline void set_file_hugepages(struct file *file)
+{
+	file->f_op = &hugetlbfs_file_operations;
+}
+#else /* !CONFIG_HUGETLBFS */
+
+#define is_file_hugepages(file)		0
+#define set_file_hugepages(file)	BUG()
+#define hugetlb_zero_setup(size)	ERR_PTR(-ENOSYS)
+
+#endif /* !CONFIG_HUGETLBFS */
+
+#endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/hysdn_if.h b/include/linux/hysdn_if.h
new file mode 100644
index 000000000000..00236ae3b04e
--- /dev/null
+++ b/include/linux/hysdn_if.h
@@ -0,0 +1,33 @@
+/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * Linux driver for HYSDN cards
+ * ioctl definitions shared by hynetmgr and driver.
+ *
+ * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/****************/
+/* error values */
+/****************/
+#define ERR_NONE             0 /* no error occurred */
+#define ERR_ALREADY_BOOT  1000 /* we are already booting */
+#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
+#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
+#define EPOF_INTERNAL     1003 /* internal POF handler error */
+#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
+#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
+#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
+#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
+#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
+#define ERR_CONF_LONG     1009 /* conf line is too long */ 
+#define ERR_INV_CHAN      1010 /* invalid channel number */ 
+#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
+
+
+
+
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
new file mode 100644
index 000000000000..110904481238
--- /dev/null
+++ b/include/linux/i2c-algo-bit.h
@@ -0,0 +1,54 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-bit.h i2c driver algorithms for bit-shift adapters               */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-99 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* $Id: i2c-algo-bit.h,v 1.10 2003/01/21 08:08:16 kmalkki Exp $ */
+
+#ifndef _LINUX_I2C_ALGO_BIT_H
+#define _LINUX_I2C_ALGO_BIT_H
+
+/* --- Defines for bit-adapters ---------------------------------------	*/
+/*
+ * This struct contains the hw-dependent functions of bit-style adapters to 
+ * manipulate the line states, and to init any hw-specific features. This is
+ * only used if you have more than one hw-type of adapter running. 
+ */
+struct i2c_algo_bit_data {
+	void *data;		/* private data for lowlevel routines */
+	void (*setsda) (void *data, int state);
+	void (*setscl) (void *data, int state);
+	int  (*getsda) (void *data);
+	int  (*getscl) (void *data);
+
+	/* local settings */
+	int udelay;		/* half-clock-cycle time in microsecs */
+				/* i.e. clock is (500 / udelay) KHz */
+	int mdelay;		/* in millisecs, unused */
+	int timeout;		/* in jiffies */
+};
+
+#define I2C_BIT_ADAP_MAX	16
+
+int i2c_bit_add_bus(struct i2c_adapter *);
+int i2c_bit_del_bus(struct i2c_adapter *);
+
+#endif /* _LINUX_I2C_ALGO_BIT_H */
diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h
new file mode 100644
index 000000000000..26a8b89855f1
--- /dev/null
+++ b/include/linux/i2c-algo-ite.h
@@ -0,0 +1,69 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters                 */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* Modifications by MontaVista Software, 2001
+   Changes made to support the ITE IIC peripheral */
+
+
+#ifndef I2C_ALGO_ITE_H
+#define I2C_ALGO_ITE_H 1
+
+#include <linux/i2c.h>
+
+/* Example of a sequential read request:
+	struct i2c_iic_msg s_msg; 
+
+	s_msg.addr=device_address;
+	s_msg.len=length;
+	s_msg.buf=buffer;
+	s_msg.waddr=word_address;
+	ioctl(file,I2C_SREAD, &s_msg);
+ */
+#define I2C_SREAD	0x780	/* SREAD ioctl command */
+
+struct i2c_iic_msg {
+	__u16 addr;	/* device address */
+	__u16 waddr;	/* word address */
+	short len;	/* msg length */
+	char *buf;	/* pointer to msg data */
+};
+
+struct i2c_algo_iic_data {
+	void *data;		/* private data for lolevel routines	*/
+	void (*setiic) (void *data, int ctl, int val);
+	int  (*getiic) (void *data, int ctl);
+	int  (*getown) (void *data);
+	int  (*getclock) (void *data);
+	void (*waitforpin) (void);     
+
+	/* local settings */
+	int udelay;
+	int mdelay;
+	int timeout;
+};
+
+int i2c_iic_add_bus(struct i2c_adapter *);
+int i2c_iic_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_ITE_H */
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
new file mode 100644
index 000000000000..941b786c5732
--- /dev/null
+++ b/include/linux/i2c-algo-pca.h
@@ -0,0 +1,17 @@
+#ifndef _LINUX_I2C_ALGO_PCA_H
+#define _LINUX_I2C_ALGO_PCA_H
+
+struct i2c_algo_pca_data {
+	int  (*get_own)			(struct i2c_algo_pca_data *adap); /* Obtain own address */
+	int  (*get_clock)		(struct i2c_algo_pca_data *adap);
+	void (*write_byte)		(struct i2c_algo_pca_data *adap, int reg, int val);
+	int  (*read_byte)		(struct i2c_algo_pca_data *adap, int reg);
+	int  (*wait_for_interrupt)	(struct i2c_algo_pca_data *adap);
+};
+
+#define I2C_PCA_ADAP_MAX	16
+
+int i2c_pca_add_bus(struct i2c_adapter *);
+int i2c_pca_del_bus(struct i2c_adapter *);
+
+#endif /* _LINUX_I2C_ALGO_PCA_H */
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
new file mode 100644
index 000000000000..2a508562255f
--- /dev/null
+++ b/include/linux/i2c-algo-pcf.h
@@ -0,0 +1,49 @@
+/* ------------------------------------------------------------------------- */
+/* adap-pcf.h i2c driver algorithms for PCF8584 adapters                     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* $Id: i2c-algo-pcf.h,v 1.8 2003/01/21 08:08:16 kmalkki Exp $ */
+
+#ifndef _LINUX_I2C_ALGO_PCF_H
+#define _LINUX_I2C_ALGO_PCF_H
+
+struct i2c_algo_pcf_data {
+	void *data;		/* private data for lolevel routines	*/
+	void (*setpcf) (void *data, int ctl, int val);
+	int  (*getpcf) (void *data, int ctl);
+	int  (*getown) (void *data);
+	int  (*getclock) (void *data);
+	void (*waitforpin) (void);     
+
+	/* local settings */
+	int udelay;
+	int mdelay;
+	int timeout;
+};
+
+#define I2C_PCF_ADAP_MAX	16
+
+int i2c_pcf_add_bus(struct i2c_adapter *);
+int i2c_pcf_del_bus(struct i2c_adapter *);
+
+#endif /* _LINUX_I2C_ALGO_PCF_H */
diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h
new file mode 100644
index 000000000000..4a0113d64064
--- /dev/null
+++ b/include/linux/i2c-algo-sgi.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
+ */
+
+#ifndef I2C_ALGO_SGI_H
+#define I2C_ALGO_SGI_H 1
+
+#include <linux/i2c.h>
+
+struct i2c_algo_sgi_data {
+	void *data;	/* private data for lowlevel routines */
+	unsigned (*getctrl)(void *data);
+	void (*setctrl)(void *data, unsigned val);
+	unsigned (*rdata)(void *data);
+	void (*wdata)(void *data, unsigned val);
+
+	int xfer_timeout;
+	int ack_timeout;
+};
+
+int i2c_sgi_add_bus(struct i2c_adapter *);
+int i2c_sgi_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_SGI_H */
diff --git a/include/linux/i2c-algo-sibyte.h b/include/linux/i2c-algo-sibyte.h
new file mode 100644
index 000000000000..03914ded8614
--- /dev/null
+++ b/include/linux/i2c-algo-sibyte.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef I2C_ALGO_SIBYTE_H
+#define I2C_ALGO_SIBYTE_H 1
+
+#include <linux/i2c.h>
+
+struct i2c_algo_sibyte_data {
+	void *data;		/* private data */
+        int   bus;		/* which bus */
+        void *reg_base;		/* CSR base */
+};
+
+int i2c_sibyte_add_bus(struct i2c_adapter *, int speed);
+int i2c_sibyte_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_SIBYTE_H */
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
new file mode 100644
index 000000000000..d228230ffe5d
--- /dev/null
+++ b/include/linux/i2c-dev.h
@@ -0,0 +1,48 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* $Id: i2c-dev.h,v 1.13 2003/01/21 08:08:16 kmalkki Exp $ */
+
+#ifndef _LINUX_I2C_DEV_H
+#define _LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+
+/* Some IOCTL commands are defined in <linux/i2c.h> */
+/* Note: 10-bit addresses are NOT supported! */
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+#endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
new file mode 100644
index 000000000000..89270ce51470
--- /dev/null
+++ b/include/linux/i2c-id.h
@@ -0,0 +1,319 @@
+/* ------------------------------------------------------------------------- */
+/* 									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/* 									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-1999 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+#ifndef LINUX_I2C_ID_H
+#define LINUX_I2C_ID_H
+
+/*
+ * This file is part of the i2c-bus package and contains the identifier
+ * values for drivers, adapters and other folk populating these serial
+ * worlds. 
+ *
+ * These will change often (i.e. additions) , therefore this has been 
+ * separated from the functional interface definitions of the i2c api.
+ *
+ */
+
+/*
+ * ---- Driver types -----------------------------------------------------
+ *       device id name + number        function description, i2c address(es)
+ *
+ *  Range 1000-1999 range is defined in sensors/sensors.h 
+ *  Range 0x100 - 0x1ff is for V4L2 Common Components 
+ *  Range 0xf000 - 0xffff is reserved for local experimentation, and should
+ *        never be used in official drivers 
+ */
+
+#define I2C_DRIVERID_MSP3400	 1
+#define I2C_DRIVERID_TUNER	 2
+#define I2C_DRIVERID_VIDEOTEX	 3	/* please rename		*/
+#define I2C_DRIVERID_TDA8425	 4	/* stereo sound processor	*/
+#define I2C_DRIVERID_TEA6420	 5	/* audio matrix switch		*/
+#define I2C_DRIVERID_TEA6415C	 6	/* video matrix switch		*/
+#define I2C_DRIVERID_TDA9840	 7	/* stereo sound processor	*/
+#define I2C_DRIVERID_SAA7111A	 8	/* video input processor	*/
+#define I2C_DRIVERID_SAA5281	 9	/* videotext decoder		*/
+#define I2C_DRIVERID_SAA7112	10	/* video decoder, image scaler	*/
+#define I2C_DRIVERID_SAA7120	11	/* video encoder		*/
+#define I2C_DRIVERID_SAA7121	12	/* video encoder		*/
+#define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
+#define I2C_DRIVERID_CH7003	14	/* digital pc to tv encoder 	*/
+#define I2C_DRIVERID_PCF8574A	15	/* i2c expander - 8 bit in/out	*/
+#define I2C_DRIVERID_PCF8582C	16	/* eeprom			*/
+#define I2C_DRIVERID_AT24Cxx	17	/* eeprom 1/2/4/8/16 K 		*/
+#define I2C_DRIVERID_TEA6300	18	/* audio mixer			*/
+#define I2C_DRIVERID_BT829	19	/* pc to tv encoder		*/
+#define I2C_DRIVERID_TDA9850	20	/* audio mixer			*/
+#define I2C_DRIVERID_TDA9855	21	/* audio mixer			*/
+#define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
+#define I2C_DRIVERID_MGATVO	23	/* Matrox TVOut			*/
+#define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
+#define I2C_DRIVERID_PCF8583	25	/* real time clock		*/
+#define I2C_DRIVERID_SAB3036	26	/* SAB3036 tuner		*/
+#define I2C_DRIVERID_TDA7432	27	/* Stereo sound processor	*/
+#define I2C_DRIVERID_TVMIXER    28      /* Mixer driver for tv cards    */
+#define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
+#define I2C_DRIVERID_DPL3518    30      /* Dolby decoder chip           */
+#define I2C_DRIVERID_TDA9873    31      /* TV sound decoder chip        */
+#define I2C_DRIVERID_TDA9875    32      /* TV sound decoder chip        */
+#define I2C_DRIVERID_PIC16C54_PV9 33    /* Audio mux/ir receiver        */
+
+#define I2C_DRIVERID_SBATT      34     /* Smart Battery Device		*/
+#define I2C_DRIVERID_SBS        35     /* SB System Manager		*/
+#define I2C_DRIVERID_VES1893	36     /* VLSI DVB-S decoder		*/
+#define I2C_DRIVERID_VES1820	37     /* VLSI DVB-C decoder		*/
+#define I2C_DRIVERID_SAA7113	38     /* video decoder			*/
+#define I2C_DRIVERID_TDA8444	39     /* octuple 6-bit DAC             */
+#define I2C_DRIVERID_BT819	40     /* video decoder			*/
+#define I2C_DRIVERID_BT856	41     /* video encoder			*/
+#define I2C_DRIVERID_VPX3220	42     /* video decoder+vbi/vtxt	*/
+#define I2C_DRIVERID_DRP3510	43     /* ADR decoder (Astra Radio)	*/
+#define I2C_DRIVERID_SP5055	44     /* Satellite tuner		*/
+#define I2C_DRIVERID_STV0030	45     /* Multipurpose switch		*/
+#define I2C_DRIVERID_SAA7108	46     /* video decoder, image scaler   */
+#define I2C_DRIVERID_DS1307	47     /* DS1307 real time clock	*/
+#define I2C_DRIVERID_ADV7175	48     /* ADV 7175/7176 video encoder	*/
+#define I2C_DRIVERID_SAA7114	49	/* video decoder		*/
+#define I2C_DRIVERID_ZR36120	50     /* Zoran 36120 video encoder	*/
+#define I2C_DRIVERID_24LC32A	51	/* Microchip 24LC32A 32k EEPROM	*/
+#define I2C_DRIVERID_STM41T00	52	/* real time clock		*/
+#define I2C_DRIVERID_UDA1342	53	/* UDA1342 audio codec		*/
+#define I2C_DRIVERID_ADV7170	54	/* video encoder		*/
+#define I2C_DRIVERID_RADEON	55	/* I2C bus on Radeon boards	*/
+#define I2C_DRIVERID_MAX1617	56	/* temp sensor			*/
+#define I2C_DRIVERID_SAA7191	57	/* video encoder		*/
+#define I2C_DRIVERID_INDYCAM	58	/* SGI IndyCam			*/
+#define I2C_DRIVERID_BT832	59	/* CMOS camera video processor	*/
+#define I2C_DRIVERID_TDA9887	60	/* TDA988x IF-PLL demodulator	*/
+#define I2C_DRIVERID_OVCAMCHIP	61	/* OmniVision CMOS image sens.	*/
+#define I2C_DRIVERID_TDA7313	62	/* TDA7313 audio processor	*/
+#define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
+#define I2C_DRIVERID_SAA7114H	64	/* video decoder		*/
+
+
+#define I2C_DRIVERID_EXP0	0xF0	/* experimental use id's	*/
+#define I2C_DRIVERID_EXP1	0xF1
+#define I2C_DRIVERID_EXP2	0xF2
+#define I2C_DRIVERID_EXP3	0xF3
+
+#define I2C_DRIVERID_I2CDEV	900
+#define I2C_DRIVERID_I2CPROC	901
+#define I2C_DRIVERID_ARP        902    /* SMBus ARP Client              */
+#define I2C_DRIVERID_ALERT      903    /* SMBus Alert Responder Client  */
+
+/* IDs --   Use DRIVERIDs 1000-1999 for sensors. 
+   These were originally in sensors.h in the lm_sensors package */
+#define I2C_DRIVERID_LM78 1002
+#define I2C_DRIVERID_LM75 1003
+#define I2C_DRIVERID_GL518 1004
+#define I2C_DRIVERID_EEPROM 1005
+#define I2C_DRIVERID_W83781D 1006
+#define I2C_DRIVERID_LM80 1007
+#define I2C_DRIVERID_ADM1021 1008
+#define I2C_DRIVERID_ADM9240 1009
+#define I2C_DRIVERID_LTC1710 1010
+#define I2C_DRIVERID_SIS5595 1011
+#define I2C_DRIVERID_ICSPLL 1012
+#define I2C_DRIVERID_BT869 1013
+#define I2C_DRIVERID_MAXILIFE 1014
+#define I2C_DRIVERID_MATORB 1015
+#define I2C_DRIVERID_GL520 1016
+#define I2C_DRIVERID_THMC50 1017
+#define I2C_DRIVERID_DDCMON 1018
+#define I2C_DRIVERID_VIA686A 1019
+#define I2C_DRIVERID_ADM1025 1020
+#define I2C_DRIVERID_LM87 1021
+#define I2C_DRIVERID_PCF8574 1022
+#define I2C_DRIVERID_MTP008 1023
+#define I2C_DRIVERID_DS1621 1024
+#define I2C_DRIVERID_ADM1024 1025
+#define I2C_DRIVERID_IT87 1026
+#define I2C_DRIVERID_CH700X 1027 /* single driver for CH7003-7009 digital pc to tv encoders */
+#define I2C_DRIVERID_FSCPOS 1028
+#define I2C_DRIVERID_FSCSCY 1029
+#define I2C_DRIVERID_PCF8591 1030
+#define I2C_DRIVERID_SMSC47M1 1031
+#define I2C_DRIVERID_VT1211 1032
+#define I2C_DRIVERID_LM92 1033
+#define I2C_DRIVERID_VT8231 1034
+#define I2C_DRIVERID_SMARTBATT 1035
+#define I2C_DRIVERID_BMCSENSORS 1036
+#define I2C_DRIVERID_FS451 1037
+#define I2C_DRIVERID_W83627HF 1038
+#define I2C_DRIVERID_LM85 1039
+#define I2C_DRIVERID_LM83 1040
+#define I2C_DRIVERID_LM90 1042
+#define I2C_DRIVERID_ASB100 1043
+#define I2C_DRIVERID_FSCHER 1046
+#define I2C_DRIVERID_W83L785TS 1047
+#define I2C_DRIVERID_SMSC47B397 1050
+
+/*
+ * ---- Adapter types ----------------------------------------------------
+ *
+ * First, we distinguish between several algorithms to access the hardware
+ * interface types, as a PCF 8584 needs other care than a bit adapter.
+ */
+
+#define I2C_ALGO_NONE	0x000000
+#define I2C_ALGO_BIT	0x010000	/* bit style adapters		*/
+#define I2C_ALGO_PCF	0x020000	/* PCF 8584 style adapters	*/
+#define I2C_ALGO_ATI	0x030000	/* ATI video card		*/
+#define I2C_ALGO_SMBUS	0x040000
+#define I2C_ALGO_ISA 	0x050000	/* lm_sensors ISA pseudo-adapter */
+#define I2C_ALGO_SAA7146 0x060000	/* SAA 7146 video decoder bus	*/
+#define I2C_ALGO_ACB 	0x070000	/* ACCESS.bus algorithm         */
+#define I2C_ALGO_IIC    0x080000 	/* ITE IIC bus */
+#define I2C_ALGO_SAA7134 0x090000
+#define I2C_ALGO_MPC824X 0x0a0000	/* Motorola 8240 / 8245         */
+#define I2C_ALGO_IPMI 	0x0b0000	/* IPMI dummy adapter */
+#define I2C_ALGO_IPMB 	0x0c0000	/* IPMB adapter */
+#define I2C_ALGO_MPC107 0x0d0000
+#define I2C_ALGO_EC     0x100000        /* ACPI embedded controller     */
+
+#define I2C_ALGO_MPC8XX 0x110000	/* MPC8xx PowerPC I2C algorithm */
+#define I2C_ALGO_OCP    0x120000	/* IBM or otherwise On-chip I2C algorithm */
+#define I2C_ALGO_BITHS	0x130000	/* enhanced bit style adapters	*/
+#define I2C_ALGO_IOP3XX	0x140000	/* XSCALE IOP3XX On-chip I2C alg */
+#define I2C_ALGO_SIBYTE 0x150000	/* Broadcom SiByte SOCs		*/
+#define I2C_ALGO_SGI	0x160000	/* SGI algorithm		*/
+
+#define I2C_ALGO_USB	0x170000	/* USB algorithm		*/
+#define I2C_ALGO_VIRT	0x180000	/* Virtual bus adapter		*/
+
+#define I2C_ALGO_MV64XXX 0x190000	/* Marvell mv64xxx i2c ctlr	*/
+#define I2C_ALGO_PCA	0x1a0000	/* PCA 9564 style adapters	*/
+#define I2C_ALGO_AU1550	0x1b0000        /* Au1550 PSC algorithm		*/
+
+#define I2C_ALGO_EXP	0x800000	/* experimental			*/
+
+#define I2C_ALGO_MASK	0xff0000	/* Mask for algorithms		*/
+#define I2C_ALGO_SHIFT	0x10	/* right shift to get index values 	*/
+
+#define I2C_HW_ADAPS	0x10000		/* # adapter types		*/
+#define I2C_HW_MASK	0xffff		
+
+
+/* hw specific modules that are defined per algorithm layer
+ */
+
+/* --- Bit algorithm adapters 						*/
+#define I2C_HW_B_LP	0x00	/* Parallel port Philips style adapter	*/
+#define I2C_HW_B_LPC	0x01	/* Parallel port, over control reg.	*/
+#define I2C_HW_B_SER	0x02	/* Serial line interface		*/
+#define I2C_HW_B_ELV	0x03	/* ELV Card				*/
+#define I2C_HW_B_VELLE	0x04	/* Vellemann K8000			*/
+#define I2C_HW_B_BT848	0x05	/* BT848 video boards			*/
+#define I2C_HW_B_WNV	0x06	/* Winnov Videums			*/
+#define I2C_HW_B_VIA	0x07	/* Via vt82c586b			*/
+#define I2C_HW_B_HYDRA	0x08	/* Apple Hydra Mac I/O			*/
+#define I2C_HW_B_G400	0x09	/* Matrox G400				*/
+#define I2C_HW_B_I810	0x0a	/* Intel I810 				*/
+#define I2C_HW_B_VOO	0x0b	/* 3dfx Voodoo 3 / Banshee      	*/
+#define I2C_HW_B_PPORT  0x0c	/* Primitive parallel port adapter	*/
+#define I2C_HW_B_SAVG	0x0d	/* Savage 4                     	*/
+#define I2C_HW_B_SCX200	0x0e	/* Nat'l Semi SCx200 I2C        	*/
+#define I2C_HW_B_RIVA	0x10	/* Riva based graphics cards		*/
+#define I2C_HW_B_IOC	0x11	/* IOC bit-wiggling			*/
+#define I2C_HW_B_TSUNA  0x12	/* DEC Tsunami chipset			*/
+#define I2C_HW_B_FRODO  0x13    /* 2d3D, Inc. SA-1110 Development Board */
+#define I2C_HW_B_OMAHA  0x14    /* Omaha I2C interface (ARM)		*/
+#define I2C_HW_B_GUIDE  0x15    /* Guide bit-basher			*/
+#define I2C_HW_B_IXP2000 0x16	/* GPIO on IXP2000 systems              */
+#define I2C_HW_B_IXP4XX 0x17	/* GPIO on IXP4XX systems		*/
+#define I2C_HW_B_S3VIA	0x18	/* S3Via ProSavage adapter		*/
+#define I2C_HW_B_ZR36067 0x19	/* Zoran-36057/36067 based boards	*/
+#define I2C_HW_B_PCILYNX 0x1a	/* TI PCILynx I2C adapter		*/
+#define I2C_HW_B_CX2388x 0x1b	/* connexant 2388x based tv cards	*/
+
+/* --- PCF 8584 based algorithms					*/
+#define I2C_HW_P_LP	0x00	/* Parallel port interface		*/
+#define I2C_HW_P_ISA	0x01	/* generic ISA Bus inteface card	*/
+#define I2C_HW_P_ELEK	0x02	/* Elektor ISA Bus inteface card	*/
+
+/* --- PCA 9564 based algorithms */
+#define I2C_HW_A_ISA	0x00	/* generic ISA Bus interface card	*/
+
+/* --- ACPI Embedded controller algorithms                              */
+#define I2C_HW_ACPI_EC          0x00
+
+/* --- MPC824x PowerPC adapters						*/
+#define I2C_HW_MPC824X 0x00	/* Motorola 8240 / 8245                 */
+
+/* --- MPC8xx PowerPC adapters						*/
+#define I2C_HW_MPC8XX_EPON 0x00	/* Eponymous MPC8xx I2C adapter 	*/
+
+/* --- ITE based algorithms						*/
+#define I2C_HW_I_IIC	0x00	/* controller on the ITE */
+
+/* --- PowerPC on-chip adapters						*/
+#define I2C_HW_OCP 0x00	/* IBM on-chip I2C adapter 	*/
+
+/* --- Broadcom SiByte adapters						*/
+#define I2C_HW_SIBYTE	0x00
+
+/* --- SGI adapters							*/
+#define I2C_HW_SGI_VINO	0x00
+#define I2C_HW_SGI_MACE	0x01
+
+/* --- XSCALE on-chip adapters                          */
+#define I2C_HW_IOP3XX 0x00
+
+/* --- Au1550 PSC adapters adapters					*/
+#define I2C_HW_AU1550_PSC	0x00
+
+/* --- SMBus only adapters						*/
+#define I2C_HW_SMBUS_PIIX4	0x00
+#define I2C_HW_SMBUS_ALI15X3	0x01
+#define I2C_HW_SMBUS_VIA2	0x02
+#define I2C_HW_SMBUS_VOODOO3	0x03
+#define I2C_HW_SMBUS_I801	0x04
+#define I2C_HW_SMBUS_AMD756	0x05
+#define I2C_HW_SMBUS_SIS5595	0x06
+#define I2C_HW_SMBUS_ALI1535	0x07
+#define I2C_HW_SMBUS_SIS630	0x08
+#define I2C_HW_SMBUS_SIS96X	0x09
+#define I2C_HW_SMBUS_AMD8111	0x0a
+#define I2C_HW_SMBUS_SCX200	0x0b
+#define I2C_HW_SMBUS_NFORCE2	0x0c
+#define I2C_HW_SMBUS_W9968CF	0x0d
+#define I2C_HW_SMBUS_OV511	0x0e	/* OV511(+) USB 1.1 webcam ICs	*/
+#define I2C_HW_SMBUS_OV518	0x0f	/* OV518(+) USB 1.1 webcam ICs	*/
+#define I2C_HW_SMBUS_OV519	0x10	/* OV519 USB 1.1 webcam IC	*/
+#define I2C_HW_SMBUS_OVFX2	0x11	/* Cypress/OmniVision FX2 webcam */
+
+/* --- ISA pseudo-adapter						*/
+#define I2C_HW_ISA 0x00
+
+/* --- IPMI pseudo-adapter						*/
+#define I2C_HW_IPMI 0x00
+
+/* --- IPMB adapter						*/
+#define I2C_HW_IPMB 0x00
+
+/* --- MCP107 adapter */
+#define I2C_HW_MPC107 0x00
+
+/* --- Marvell mv64xxx i2c adapter */
+#define I2C_HW_MV64XXX 0x00
+
+#endif /* LINUX_I2C_ID_H */
diff --git a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h
new file mode 100644
index 000000000000..21b625204956
--- /dev/null
+++ b/include/linux/i2c-sensor.h
@@ -0,0 +1,263 @@
+/*
+    i2c-sensor.h - Part of the i2c package
+    was originally sensors.h - Part of lm_sensors, Linux kernel modules
+                               for hardware monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _LINUX_I2C_SENSOR_H
+#define _LINUX_I2C_SENSOR_H
+
+/* A structure containing detect information.
+   Force variables overrule all other variables; they force a detection on
+   that place. If a specific chip is given, the module blindly assumes this
+   chip type is present; if a general force (kind == 0) is given, the module
+   will still try to figure out what type of chip is present. This is useful
+   if for some reasons the detect for SMBus or ISA address space filled
+   fails.
+   probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
+     A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
+     the ISA bus, -1 for any I2C bus), the second is the address. 
+   kind: The kind of chip. 0 equals any chip.
+*/
+struct i2c_force_data {
+	unsigned short *force;
+	unsigned short kind;
+};
+
+/* A structure containing the detect information.
+   normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_ISA_END.
+     A list of I2C addresses which should normally be examined.
+   normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
+     A list of ISA addresses which should normally be examined.
+   probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
+     A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
+     the ISA bus, -1 for any I2C bus), the second is the address. These
+     addresses are also probed, as if they were in the 'normal' list.
+   ignore: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
+     A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
+     the ISA bus, -1 for any I2C bus), the second is the I2C address. These
+     addresses are never probed. This parameter overrules 'normal' and 
+     'probe', but not the 'force' lists.
+   force_data: insmod parameters. A list, ending with an element of which
+     the force field is NULL.
+*/
+struct i2c_address_data {
+	unsigned short *normal_i2c;
+	unsigned int *normal_isa;
+	unsigned short *probe;
+	unsigned short *ignore;
+	struct i2c_force_data *forces;
+};
+
+#define SENSORS_MODULE_PARM_FORCE(name) \
+  I2C_CLIENT_MODULE_PARM(force_ ## name, \
+                      "List of adapter,address pairs which are unquestionably" \
+                      " assumed to contain a `" # name "' chip")
+
+
+/* This defines several insmod variables, and the addr_data structure */
+#define SENSORS_INSMOD \
+  I2C_CLIENT_MODULE_PARM(probe, \
+                      "List of adapter,address pairs to scan additionally"); \
+  I2C_CLIENT_MODULE_PARM(ignore, \
+                      "List of adapter,address pairs not to scan"); \
+	static struct i2c_address_data addr_data = {			\
+			.normal_i2c =		normal_i2c,		\
+			.normal_isa =		normal_isa,		\
+			.probe =		probe,			\
+			.ignore =		ignore,			\
+			.forces =		forces,			\
+		}
+
+/* The following functions create an enum with the chip names as elements. 
+   The first element of the enum is any_chip. These are the only macros
+   a module will want to use. */
+
+#define SENSORS_INSMOD_0 \
+  enum chips { any_chip }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_1(chip1) \
+  enum chips { any_chip, chip1 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  static struct i2c_force_data forces[] = {{force,any_chip},\
+                                                 {force_ ## chip1,chip1}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_2(chip1,chip2) \
+  enum chips { any_chip, chip1, chip2 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
+  enum chips { any_chip, chip1, chip2, chip3 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
+  enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  SENSORS_MODULE_PARM_FORCE(chip4); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {force_ ## chip4,chip4}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
+  enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  SENSORS_MODULE_PARM_FORCE(chip4); \
+  SENSORS_MODULE_PARM_FORCE(chip5); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {force_ ## chip4,chip4}, \
+                                                 {force_ ## chip5,chip5}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
+  enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  SENSORS_MODULE_PARM_FORCE(chip4); \
+  SENSORS_MODULE_PARM_FORCE(chip5); \
+  SENSORS_MODULE_PARM_FORCE(chip6); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {force_ ## chip4,chip4}, \
+                                                 {force_ ## chip5,chip5}, \
+                                                 {force_ ## chip6,chip6}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
+  enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  SENSORS_MODULE_PARM_FORCE(chip4); \
+  SENSORS_MODULE_PARM_FORCE(chip5); \
+  SENSORS_MODULE_PARM_FORCE(chip6); \
+  SENSORS_MODULE_PARM_FORCE(chip7); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {force_ ## chip4,chip4}, \
+                                                 {force_ ## chip5,chip5}, \
+                                                 {force_ ## chip6,chip6}, \
+                                                 {force_ ## chip7,chip7}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \
+  enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+  SENSORS_MODULE_PARM_FORCE(chip1); \
+  SENSORS_MODULE_PARM_FORCE(chip2); \
+  SENSORS_MODULE_PARM_FORCE(chip3); \
+  SENSORS_MODULE_PARM_FORCE(chip4); \
+  SENSORS_MODULE_PARM_FORCE(chip5); \
+  SENSORS_MODULE_PARM_FORCE(chip6); \
+  SENSORS_MODULE_PARM_FORCE(chip7); \
+  SENSORS_MODULE_PARM_FORCE(chip8); \
+  static struct i2c_force_data forces[] = {{force,any_chip}, \
+                                                 {force_ ## chip1,chip1}, \
+                                                 {force_ ## chip2,chip2}, \
+                                                 {force_ ## chip3,chip3}, \
+                                                 {force_ ## chip4,chip4}, \
+                                                 {force_ ## chip5,chip5}, \
+                                                 {force_ ## chip6,chip6}, \
+                                                 {force_ ## chip7,chip7}, \
+                                                 {force_ ## chip8,chip8}, \
+                                                 {NULL}}; \
+  SENSORS_INSMOD
+
+/* Detect function. It iterates over all possible addresses itself. For
+   SMBus addresses, it will only call found_proc if some client is connected
+   to the SMBus (unless a 'force' matched); for ISA detections, this is not
+   done. */
+extern int i2c_detect(struct i2c_adapter *adapter,
+		      struct i2c_address_data *address_data,
+		      int (*found_proc) (struct i2c_adapter *, int, int));
+
+
+/* This macro is used to scale user-input to sensible values in almost all
+   chip drivers. */
+static inline int SENSORS_LIMIT(long value, long low, long high)
+{
+	if (value < low)
+		return low;
+	else if (value > high)
+		return high;
+	else
+		return value;
+}
+#endif				/* def _LINUX_I2C_SENSOR_H */
diff --git a/include/linux/i2c-vid.h b/include/linux/i2c-vid.h
new file mode 100644
index 000000000000..974835e3530f
--- /dev/null
+++ b/include/linux/i2c-vid.h
@@ -0,0 +1,99 @@
+/*
+    i2c-vid.h - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+    With assistance from Trent Piepho <xyzzy@speakeasy.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This file contains common code for decoding VID pins.
+    This file is #included in various chip drivers in this directory.
+    As the user is unlikely to load more than one driver which
+    includes this code we don't worry about the wasted space.
+    Reference: VRM x.y DC-DC Converter Design Guidelines,
+    available at http://developer.intel.com
+*/
+
+/*
+    AMD Opteron processors don't follow the Intel VRM spec.
+    I'm going to "make up" 2.4 as the VRM spec for the Opterons.
+    No good reason just a mnemonic for the 24x Opteron processor
+    series
+
+    Opteron VID encoding is:
+
+       00000  =  1.550 V
+       00001  =  1.525 V
+        . . . .
+       11110  =  0.800 V
+       11111  =  0.000 V (off)
+ */
+
+/*
+    Legal val values 0x00 - 0x1f; except for VRD 10.0, 0x00 - 0x3f.
+    vrm is the Intel VRM document version.
+    Note: vrm version is scaled by 10 and the return value is scaled by 1000
+    to avoid floating point in the kernel.
+*/
+
+int i2c_which_vrm(void);
+
+#define DEFAULT_VRM	82
+
+static inline int vid_from_reg(int val, int vrm)
+{
+	int vid;
+
+	switch(vrm) {
+
+	case  0:
+		return 0;
+
+	case 100:               /* VRD 10.0 */
+		if((val & 0x1f) == 0x1f)
+			return 0;
+		if((val & 0x1f) <= 0x09 || val == 0x0a)
+			vid = 10875 - (val & 0x1f) * 250;
+		else
+			vid = 18625 - (val & 0x1f) * 250;
+		if(val & 0x20)
+			vid -= 125;
+		vid /= 10;      /* only return 3 dec. places for now */
+		return vid;
+
+	case 24:                /* Opteron processor */
+		return(val == 0x1f ? 0 : 1550 - val * 25);
+
+	case 91:		/* VRM 9.1 */
+	case 90:		/* VRM 9.0 */
+		return(val == 0x1f ? 0 :
+		                       1850 - val * 25);
+
+	case 85:		/* VRM 8.5 */
+		return((val & 0x10  ? 25 : 0) +
+		       ((val & 0x0f) > 0x04 ? 2050 : 1250) -
+		       ((val & 0x0f) * 50));
+
+	case 84:		/* VRM 8.4 */
+		val &= 0x0f;
+				/* fall through */
+	default:		/* VRM 8.2 */
+		return(val == 0x1f ? 0 :
+		       val & 0x10  ? 5100 - (val) * 100 :
+		                     2050 - (val) * 50);
+	}
+}
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
new file mode 100644
index 000000000000..ebcd745f4cd6
--- /dev/null
+++ b/include/linux/i2c.h
@@ -0,0 +1,594 @@
+/* ------------------------------------------------------------------------- */
+/* 									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/* 									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+   Frodo Looijaard <frodol@dds.nl> */
+
+/* $Id: i2c.h,v 1.68 2003/01/21 08:08:16 kmalkki Exp $ */
+
+#ifndef _LINUX_I2C_H
+#define _LINUX_I2C_H
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/i2c-id.h>
+#include <linux/device.h>	/* for struct device */
+#include <asm/semaphore.h>
+
+/* --- General options ------------------------------------------------	*/
+
+struct i2c_msg;
+struct i2c_algorithm;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_driver;
+struct i2c_client_address_data;
+union i2c_smbus_data;
+
+/*
+ * The master routines are the ones normally used to transmit data to devices
+ * on a bus (or read from them). Apart from two basic transfer functions to 
+ * transmit one message at a time, a more complex version can be used to 
+ * transmit an arbitrary number of messages without interruption.
+ */
+extern int i2c_master_send(struct i2c_client *,const char* ,int);
+extern int i2c_master_recv(struct i2c_client *,char* ,int);
+
+/* Transfer num messages.
+ */
+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
+
+/*
+ * Some adapter types (i.e. PCF 8584 based ones) may support slave behaviuor. 
+ * This is not tested/implemented yet and will change in the future.
+ */
+extern int i2c_slave_send(struct i2c_client *,char*,int);
+extern int i2c_slave_recv(struct i2c_client *,char*,int);
+
+
+
+/* This is the very generalized SMBus access routine. You probably do not
+   want to use this, though; one of the functions below may be much easier,
+   and probably just as fast. 
+   Note that we use i2c_adapter here, because you do not need a specific
+   smbus adapter to call this function. */
+extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, 
+                           unsigned short flags,
+                           char read_write, u8 command, int size,
+                           union i2c_smbus_data * data);
+
+/* Now follow the 'nice' access routines. These also document the calling
+   conventions of smbus_access. */
+
+extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
+extern s32 i2c_smbus_read_byte(struct i2c_client * client);
+extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
+extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
+extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
+                                     u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
+extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
+                                     u8 command, u16 value);
+/* Returns the number of bytes transferred */
+extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
+				      u8 command, u8 length,
+				      u8 *values);
+extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+					 u8 command, u8 *values);
+
+/*
+ * A driver is capable of handling one or more physical devices present on
+ * I2C adapters. This information is used to inform the driver of adapter
+ * events.
+ */
+
+struct i2c_driver {
+	struct module *owner;
+	char name[32];
+	int id;
+	unsigned int class;
+	unsigned int flags;		/* div., see below		*/
+
+	/* Notifies the driver that a new bus has appeared. This routine
+	 * can be used by the driver to test if the bus meets its conditions
+	 * & seek for the presence of the chip(s) it supports. If found, it 
+	 * registers the client(s) that are on the bus to the i2c admin. via
+	 * i2c_attach_client.
+	 */
+	int (*attach_adapter)(struct i2c_adapter *);
+	int (*detach_adapter)(struct i2c_adapter *);
+
+	/* tells the driver that a client is about to be deleted & gives it 
+	 * the chance to remove its private data. Also, if the client struct
+	 * has been dynamically allocated by the driver in the function above,
+	 * it must be freed here.
+	 */
+	int (*detach_client)(struct i2c_client *);
+	
+	/* a ioctl like command that can be used to perform specific functions
+	 * with the device.
+	 */
+	int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
+
+	struct device_driver driver;
+	struct list_head list;
+};
+#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
+
+#define I2C_NAME_SIZE	50
+
+/*
+ * i2c_client identifies a single device (i.e. chip) that is connected to an 
+ * i2c bus. The behaviour is defined by the routines of the driver. This
+ * function is mainly used for lookup & other admin. functions.
+ */
+struct i2c_client {
+	unsigned int flags;		/* div., see below		*/
+	unsigned int addr;		/* chip address - NOTE: 7bit 	*/
+					/* addresses are stored in the	*/
+					/* _LOWER_ 7 bits of this char	*/
+	/* addr: unsigned int to make lm_sensors i2c-isa adapter work
+	  more cleanly. It does not take any more memory space, due to
+	  alignment considerations */
+	struct i2c_adapter *adapter;	/* the adapter we sit on	*/
+	struct i2c_driver *driver;	/* and our access routines	*/
+	int usage_count;		/* How many accesses currently  */
+					/* to the client		*/
+	struct device dev;		/* the device structure		*/
+	struct list_head list;
+	char name[I2C_NAME_SIZE];
+	struct completion released;
+};
+#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
+
+static inline void *i2c_get_clientdata (struct i2c_client *dev)
+{
+	return dev_get_drvdata (&dev->dev);
+}
+
+static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
+{
+	dev_set_drvdata (&dev->dev, data);
+}
+
+#define I2C_DEVNAME(str)	.name = str
+
+static inline char *i2c_clientname(struct i2c_client *c)
+{
+	return &c->name[0];
+}
+
+/*
+ * The following structs are for those who like to implement new bus drivers:
+ * i2c_algorithm is the interface to a class of hardware solutions which can
+ * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
+ * to name two of the most common.
+ */
+struct i2c_algorithm {
+	char name[32];				/* textual description 	*/
+	unsigned int id;
+
+	/* If an adapter algorithm can't do I2C-level access, set master_xfer
+	   to NULL. If an adapter algorithm can do SMBus access, set 
+	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
+	   using common I2C messages */
+	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 
+	                   int num);
+	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, 
+	                   unsigned short flags, char read_write,
+	                   u8 command, int size, union i2c_smbus_data * data);
+
+	/* --- these optional/future use for some adapter types.*/
+	int (*slave_send)(struct i2c_adapter *,char*,int);
+	int (*slave_recv)(struct i2c_adapter *,char*,int);
+
+	/* --- ioctl like call to set div. parameters. */
+	int (*algo_control)(struct i2c_adapter *, unsigned int, unsigned long);
+
+	/* To determine what the adapter supports */
+	u32 (*functionality) (struct i2c_adapter *);
+};
+
+/*
+ * i2c_adapter is the structure used to identify a physical i2c bus along
+ * with the access algorithms necessary to access it.
+ */
+struct i2c_adapter {
+	struct module *owner;
+	unsigned int id;/* == is algo->id | hwdep.struct->id, 		*/
+			/* for registered values see below		*/
+	unsigned int class;
+	struct i2c_algorithm *algo;/* the algorithm to access the bus	*/
+	void *algo_data;
+
+	/* --- administration stuff. */
+	int (*client_register)(struct i2c_client *);
+	int (*client_unregister)(struct i2c_client *);
+
+	/* data fields that are valid for all devices	*/
+	struct semaphore bus_lock;
+	struct semaphore clist_lock;
+
+	int timeout;
+	int retries;
+	struct device dev;		/* the adapter device */
+	struct class_device class_dev;	/* the class device */
+
+#ifdef CONFIG_PROC_FS 
+	/* No need to set this when you initialize the adapter          */
+	int inode;
+#endif /* def CONFIG_PROC_FS */
+
+	int nr;
+	struct list_head clients;
+	struct list_head list;
+	char name[I2C_NAME_SIZE];
+	struct completion dev_released;
+	struct completion class_dev_released;
+};
+#define dev_to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
+#define class_dev_to_i2c_adapter(d) container_of(d, struct i2c_adapter, class_dev)
+
+static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
+{
+	return dev_get_drvdata (&dev->dev);
+}
+
+static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
+{
+	dev_set_drvdata (&dev->dev, data);
+}
+
+/*flags for the driver struct: */
+#define I2C_DF_NOTIFY	0x01		/* notify on bus (de/a)ttaches 	*/
+#if 0
+/* this flag is gone -- there is a (optional) driver->detach_adapter
+ * callback now which can be used instead */
+# define I2C_DF_DUMMY	0x02
+#endif
+
+/*flags for the client struct: */
+#define I2C_CLIENT_ALLOW_USE		0x01	/* Client allows access */
+#define I2C_CLIENT_ALLOW_MULTIPLE_USE 	0x02  	/* Allow multiple access-locks */
+						/* on an i2c_client */
+#define I2C_CLIENT_PEC  0x04			/* Use Packet Error Checking */
+#define I2C_CLIENT_TEN	0x10			/* we have a ten bit chip address	*/
+						/* Must equal I2C_M_TEN below */
+
+/* i2c adapter classes (bitmask) */
+#define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
+#define I2C_CLASS_TV_ANALOG	(1<<1)	/* bttv + friends */
+#define I2C_CLASS_TV_DIGITAL	(1<<2)	/* dvb cards */
+#define I2C_CLASS_DDC		(1<<3)	/* i2c-matroxfb ? */
+#define I2C_CLASS_CAM_ANALOG	(1<<4)	/* camera with analog CCD */
+#define I2C_CLASS_CAM_DIGITAL	(1<<5)	/* most webcams */
+#define I2C_CLASS_SOUND		(1<<6)	/* sound devices */
+#define I2C_CLASS_ALL		(UINT_MAX) /* all of the above */
+
+/* i2c_client_address_data is the struct for holding default client
+ * addresses for a driver and for the parameters supplied on the
+ * command line
+ */
+struct i2c_client_address_data {
+	unsigned short *normal_i2c;
+	unsigned short *normal_i2c_range;
+	unsigned short *probe;
+	unsigned short *probe_range;
+	unsigned short *ignore;
+	unsigned short *ignore_range;
+	unsigned short *force;
+};
+
+/* Internal numbers to terminate lists */
+#define I2C_CLIENT_END		0xfffeU
+#define I2C_CLIENT_ISA_END	0xfffefffeU
+
+/* The numbers to use to set I2C bus address */
+#define ANY_I2C_BUS		0xffff
+#define ANY_I2C_ISA_BUS		9191
+
+
+/* ----- functions exported by i2c.o */
+
+/* administration...
+ */
+extern int i2c_add_adapter(struct i2c_adapter *);
+extern int i2c_del_adapter(struct i2c_adapter *);
+
+extern int i2c_add_driver(struct i2c_driver *);
+extern int i2c_del_driver(struct i2c_driver *);
+
+extern int i2c_attach_client(struct i2c_client *);
+extern int i2c_detach_client(struct i2c_client *);
+
+/* New function: This is to get an i2c_client-struct for controlling the 
+   client either by using i2c_control-function or having the 
+   client-module export functions that can be used with the i2c_client
+   -struct. */
+extern struct i2c_client *i2c_get_client(int driver_id, int adapter_id, 
+					struct i2c_client *prev);
+
+/* Should be used with new function
+   extern struct i2c_client *i2c_get_client(int,int,struct i2c_client *);
+   to make sure that client-struct is valid and that it is okay to access
+   the i2c-client. 
+   returns -EACCES if client doesn't allow use (default)
+   returns -EBUSY if client doesn't allow multiple use (default) and 
+   usage_count >0 */
+extern int i2c_use_client(struct i2c_client *);
+extern int i2c_release_client(struct i2c_client *);
+
+/* call the i2c_client->command() of all attached clients with
+ * the given arguments */
+extern void i2c_clients_command(struct i2c_adapter *adap,
+				unsigned int cmd, void *arg);
+
+/* returns -EBUSY if address has been taken, 0 if not. Note that the only
+   other place at which this is called is within i2c_attach_client; so
+   you can cheat by simply not registering. Not recommended, of course! */
+extern int i2c_check_addr (struct i2c_adapter *adapter, int addr);
+
+/* Detect function. It iterates over all possible addresses itself.
+ * It will only call found_proc if some client is connected at the
+ * specific address (unless a 'force' matched);
+ */
+extern int i2c_probe(struct i2c_adapter *adapter, 
+		struct i2c_client_address_data *address_data,
+		int (*found_proc) (struct i2c_adapter *, int, int));
+
+/* An ioctl like call to set div. parameters of the adapter.
+ */
+extern int i2c_control(struct i2c_client *,unsigned int, unsigned long);
+
+/* This call returns a unique low identifier for each registered adapter,
+ * or -1 if the adapter was not registered. 
+ */
+extern int i2c_adapter_id(struct i2c_adapter *adap);
+extern struct i2c_adapter* i2c_get_adapter(int id);
+extern void i2c_put_adapter(struct i2c_adapter *adap);
+
+
+/* Return the functionality mask */
+static inline u32 i2c_get_functionality(struct i2c_adapter *adap)
+{
+	return adap->algo->functionality(adap);
+}
+
+/* Return 1 if adapter supports everything we need, 0 if not. */
+static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func)
+{
+	return (func & i2c_get_functionality(adap)) == func;
+}
+
+/*
+ * I2C Message - used for pure i2c transaction, also from /dev interface
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+ 	__u16 flags;		
+#define I2C_M_TEN	0x10	/* we have a ten bit chip address	*/
+#define I2C_M_RD	0x01
+#define I2C_M_NOSTART	0x4000
+#define I2C_M_REV_DIR_ADDR	0x2000
+#define I2C_M_IGNORE_NAK	0x1000
+#define I2C_M_NO_RD_ACK		0x0800
+ 	__u16 len;		/* msg length				*/
+ 	__u8 *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
+#define I2C_FUNC_SMBUS_HWPEC_CALC	0x00000008 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC  0x00000800 /* SMBus 2.0 */ 
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ 
+#define I2C_FUNC_SMBUS_PROC_CALL_PEC	0x00002000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000 
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000 
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000 
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000 
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000 
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000 
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000 
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000 
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000 
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2	 0x10000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC  0x40000000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+                             I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+                                  I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+                                  I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+                                   I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+                                  I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
+                                    I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
+#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC (I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \
+                                       I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC)
+#define I2C_FUNC_SMBUS_WORD_DATA_PEC  (I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \
+                                       I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC)
+
+#define I2C_FUNC_SMBUS_READ_BYTE_PEC		I2C_FUNC_SMBUS_READ_BYTE_DATA
+#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC		I2C_FUNC_SMBUS_WRITE_BYTE_DATA
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC	I2C_FUNC_SMBUS_READ_WORD_DATA
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC	I2C_FUNC_SMBUS_WRITE_WORD_DATA
+#define I2C_FUNC_SMBUS_BYTE_PEC			I2C_FUNC_SMBUS_BYTE_DATA
+#define I2C_FUNC_SMBUS_BYTE_DATA_PEC		I2C_FUNC_SMBUS_WORD_DATA
+
+#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
+                             I2C_FUNC_SMBUS_BYTE | \
+                             I2C_FUNC_SMBUS_BYTE_DATA | \
+                             I2C_FUNC_SMBUS_WORD_DATA | \
+                             I2C_FUNC_SMBUS_PROC_CALL | \
+                             I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+                             I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \
+                             I2C_FUNC_SMBUS_I2C_BLOCK)
+
+/* 
+ * Data for SMBus Messages 
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */	
+#define I2C_SMBUS_I2C_BLOCK_MAX	32	/* Not specified but we use same structure */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */
+                          /* one more for read length in block process call */
+	                                            /* and one more for PEC */
+};
+
+/* smbus_access read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions) 
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2 
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_DATA    6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_BLOCK_DATA_PEC    8		/* SMBus 2.0 */
+#define I2C_SMBUS_PROC_CALL_PEC     9		/* SMBus 2.0 */
+#define I2C_SMBUS_BLOCK_PROC_CALL_PEC  10	/* SMBus 2.0 */
+#define I2C_SMBUS_WORD_DATA_PEC	   11		/* SMBus 2.0 */
+
+
+/* ----- commands for the ioctl like i2c_command call:
+ * note that additional calls are defined in the algorithm and hw 
+ *	dependent layers - these can be listed here, or see the 
+ *	corresponding header files.
+ */
+				/* -> bit-adapter specific ioctls	*/
+#define I2C_RETRIES	0x0701	/* number of times a device address      */
+				/* should be polled when not            */
+                                /* acknowledging 			*/
+#define I2C_TIMEOUT	0x0702	/* set timeout - call with int 		*/
+
+
+/* this is for i2c-dev.c	*/
+#define I2C_SLAVE	0x0703	/* Change slave address			*/
+				/* Attn.: Slave address is 7 or 10 bits */
+#define I2C_SLAVE_FORCE	0x0706	/* Change slave address			*/
+				/* Attn.: Slave address is 7 or 10 bits */
+				/* This changes the address, even if it */
+				/* is already taken!			*/
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit	*/
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality */
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one stop only)*/
+#define I2C_PEC		0x0708	/* != 0 for SMBus PEC                   */
+#if 0
+#define I2C_ACK_TEST	0x0710	/* See if a slave is at a specific address */
+#endif
+
+#define I2C_SMBUS	0x0720	/* SMBus-level access */
+
+/* ... algo-bit.c recognizes */
+#define I2C_UDELAY	0x0705	/* set delay in microsecs between each	*/
+				/* written byte (except address)	*/
+#define I2C_MDELAY	0x0706	/* millisec delay between written bytes */
+
+/* ----- I2C-DEV: char device interface stuff ------------------------- */
+
+#define I2C_MAJOR	89		/* Device major number		*/
+
+/* These defines are used for probing i2c client addresses */
+/* The length of the option lists */
+#define I2C_CLIENT_MAX_OPTS 48
+
+/* Default fill of many variables */
+#define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
+
+/* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the
+   module header */
+
+#define I2C_CLIENT_MODULE_PARM(var,desc) \
+  static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \
+  static unsigned int var##_num; \
+  module_param_array(var, short, &var##_num, 0); \
+  MODULE_PARM_DESC(var,desc)
+
+/* This is the one you want to use in your own modules */
+#define I2C_CLIENT_INSMOD \
+  I2C_CLIENT_MODULE_PARM(probe, \
+                      "List of adapter,address pairs to scan additionally"); \
+  I2C_CLIENT_MODULE_PARM(probe_range, \
+                      "List of adapter,start-addr,end-addr triples to scan " \
+                      "additionally"); \
+  I2C_CLIENT_MODULE_PARM(ignore, \
+                      "List of adapter,address pairs not to scan"); \
+  I2C_CLIENT_MODULE_PARM(ignore_range, \
+                      "List of adapter,start-addr,end-addr triples not to " \
+                      "scan"); \
+  I2C_CLIENT_MODULE_PARM(force, \
+                      "List of adapter,address pairs to boldly assume " \
+                      "to be present"); \
+	static struct i2c_client_address_data addr_data = {		\
+			.normal_i2c = 		normal_i2c,		\
+			.normal_i2c_range =	normal_i2c_range,	\
+			.probe =		probe,			\
+			.probe_range =		probe_range,		\
+			.ignore =		ignore,			\
+			.ignore_range =		ignore_range,		\
+			.force =		force,			\
+		}
+
+/* Detect whether we are on the isa bus. If this returns true, all i2c
+   access will fail! */
+#define i2c_is_isa_client(clientptr) \
+        ((clientptr)->adapter->algo->id == I2C_ALGO_ISA)
+#define i2c_is_isa_adapter(adapptr) \
+        ((adapptr)->algo->id == I2C_ALGO_ISA)
+
+#endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
new file mode 100644
index 000000000000..ef7f644dd873
--- /dev/null
+++ b/include/linux/i2o-dev.h
@@ -0,0 +1,402 @@
+/*
+ * I2O user space accessible structures/APIs
+ *
+ * (c) Copyright 1999, 2000 Red Hat Software
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *************************************************************************
+ *
+ * This header file defines the I2O APIs that are available to both
+ * the kernel and user level applications.  Kernel specific structures
+ * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
+ * automatically includs this file.
+ *
+ */
+
+#ifndef _I2O_DEV_H
+#define _I2O_DEV_H
+
+/* How many controllers are we allowing */
+#define MAX_I2O_CONTROLLERS	32
+
+//#include <linux/ioctl.h>
+
+/*
+ * I2O Control IOCTLs and structures
+ */
+#define I2O_MAGIC_NUMBER	'i'
+#define I2OGETIOPS		_IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS])
+#define I2OHRTGET		_IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
+#define I2OLCTGET		_IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
+#define I2OPARMSET		_IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
+#define I2OPARMGET		_IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
+#define I2OSWDL 		_IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
+#define I2OSWUL 		_IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
+#define I2OSWDEL		_IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
+#define I2OVALIDATE		_IOR(I2O_MAGIC_NUMBER,8,u32)
+#define I2OHTML 		_IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
+#define I2OEVTREG		_IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
+#define I2OEVTGET		_IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
+#define I2OPASSTHRU		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
+#define I2OPASSTHRU32		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
+
+struct i2o_cmd_passthru32 {
+	unsigned int iop;	/* IOP unit number */
+	u32 msg;		/* message */
+};
+
+struct i2o_cmd_passthru {
+	unsigned int iop;	/* IOP unit number */
+	void __user *msg;	/* message */
+};
+
+struct i2o_cmd_hrtlct {
+	unsigned int iop;	/* IOP unit number */
+	void __user *resbuf;	/* Buffer for result */
+	unsigned int __user *reslen;	/* Buffer length in bytes */
+};
+
+struct i2o_cmd_psetget {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device TID */
+	void __user *opbuf;	/* Operation List buffer */
+	unsigned int oplen;	/* Operation List buffer length in bytes */
+	void __user *resbuf;	/* Result List buffer */
+	unsigned int __user *reslen;	/* Result List buffer length in bytes */
+};
+
+struct i2o_sw_xfer {
+	unsigned int iop;	/* IOP unit number */
+	unsigned char flags;	/* Flags field */
+	unsigned char sw_type;	/* Software type */
+	unsigned int sw_id;	/* Software ID */
+	void __user *buf;	/* Pointer to software buffer */
+	unsigned int __user *swlen;	/* Length of software data */
+	unsigned int __user *maxfrag;	/* Maximum fragment count */
+	unsigned int __user *curfrag;	/* Current fragment count */
+};
+
+struct i2o_html {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device ID */
+	unsigned int page;	/* HTML page */
+	void __user *resbuf;	/* Buffer for reply HTML page */
+	unsigned int __user *reslen;	/* Length in bytes of reply buffer */
+	void __user *qbuf;	/* Pointer to HTTP query string */
+	unsigned int qlen;	/* Length in bytes of query string buffer */
+};
+
+#define I2O_EVT_Q_LEN 32
+
+struct i2o_evt_id {
+	unsigned int iop;
+	unsigned int tid;
+	unsigned int evt_mask;
+};
+
+/* Event data size = frame size - message header + evt indicator */
+#define I2O_EVT_DATA_SIZE 88
+
+struct i2o_evt_info {
+	struct i2o_evt_id id;
+	unsigned char evt_data[I2O_EVT_DATA_SIZE];
+	unsigned int data_size;
+};
+
+struct i2o_evt_get {
+	struct i2o_evt_info info;
+	int pending;
+	int lost;
+};
+
+/**************************************************************************
+ * HRT related constants and structures
+ **************************************************************************/
+#define I2O_BUS_LOCAL	0
+#define I2O_BUS_ISA	1
+#define I2O_BUS_EISA	2
+#define I2O_BUS_MCA	3
+#define I2O_BUS_PCI	4
+#define I2O_BUS_PCMCIA	5
+#define I2O_BUS_NUBUS	6
+#define I2O_BUS_CARDBUS 7
+#define I2O_BUS_UNKNOWN 0x80
+
+#ifndef __KERNEL__
+
+typedef unsigned char u8;
+typedef unsigned short u16;
+typedef unsigned int u32;
+
+#endif				/* __KERNEL__ */
+
+typedef struct _i2o_pci_bus {
+	u8 PciFunctionNumber;
+	u8 PciDeviceNumber;
+	u8 PciBusNumber;
+	u8 reserved;
+	u16 PciVendorID;
+	u16 PciDeviceID;
+} i2o_pci_bus;
+
+typedef struct _i2o_local_bus {
+	u16 LbBaseIOPort;
+	u16 reserved;
+	u32 LbBaseMemoryAddress;
+} i2o_local_bus;
+
+typedef struct _i2o_isa_bus {
+	u16 IsaBaseIOPort;
+	u8 CSN;
+	u8 reserved;
+	u32 IsaBaseMemoryAddress;
+} i2o_isa_bus;
+
+typedef struct _i2o_eisa_bus_info {
+	u16 EisaBaseIOPort;
+	u8 reserved;
+	u8 EisaSlotNumber;
+	u32 EisaBaseMemoryAddress;
+} i2o_eisa_bus;
+
+typedef struct _i2o_mca_bus {
+	u16 McaBaseIOPort;
+	u8 reserved;
+	u8 McaSlotNumber;
+	u32 McaBaseMemoryAddress;
+} i2o_mca_bus;
+
+typedef struct _i2o_other_bus {
+	u16 BaseIOPort;
+	u16 reserved;
+	u32 BaseMemoryAddress;
+} i2o_other_bus;
+
+typedef struct _i2o_hrt_entry {
+	u32 adapter_id;
+	u32 parent_tid:12;
+	u32 state:4;
+	u32 bus_num:8;
+	u32 bus_type:8;
+	union {
+		i2o_pci_bus pci_bus;
+		i2o_local_bus local_bus;
+		i2o_isa_bus isa_bus;
+		i2o_eisa_bus eisa_bus;
+		i2o_mca_bus mca_bus;
+		i2o_other_bus other_bus;
+	} bus;
+} i2o_hrt_entry;
+
+typedef struct _i2o_hrt {
+	u16 num_entries;
+	u8 entry_len;
+	u8 hrt_version;
+	u32 change_ind;
+	i2o_hrt_entry hrt_entry[1];
+} i2o_hrt;
+
+typedef struct _i2o_lct_entry {
+	u32 entry_size:16;
+	u32 tid:12;
+	u32 reserved:4;
+	u32 change_ind;
+	u32 device_flags;
+	u32 class_id:12;
+	u32 version:4;
+	u32 vendor_id:16;
+	u32 sub_class;
+	u32 user_tid:12;
+	u32 parent_tid:12;
+	u32 bios_info:8;
+	u8 identity_tag[8];
+	u32 event_capabilities;
+} i2o_lct_entry;
+
+typedef struct _i2o_lct {
+	u32 table_size:16;
+	u32 boot_tid:12;
+	u32 lct_ver:4;
+	u32 iop_flags;
+	u32 change_ind;
+	i2o_lct_entry lct_entry[1];
+} i2o_lct;
+
+typedef struct _i2o_status_block {
+	u16 org_id;
+	u16 reserved;
+	u16 iop_id:12;
+	u16 reserved1:4;
+	u16 host_unit_id;
+	u16 segment_number:12;
+	u16 i2o_version:4;
+	u8 iop_state;
+	u8 msg_type;
+	u16 inbound_frame_size;
+	u8 init_code;
+	u8 reserved2;
+	u32 max_inbound_frames;
+	u32 cur_inbound_frames;
+	u32 max_outbound_frames;
+	char product_id[24];
+	u32 expected_lct_size;
+	u32 iop_capabilities;
+	u32 desired_mem_size;
+	u32 current_mem_size;
+	u32 current_mem_base;
+	u32 desired_io_size;
+	u32 current_io_size;
+	u32 current_io_base;
+	u32 reserved3:24;
+	u32 cmd_status:8;
+} i2o_status_block;
+
+/* Event indicator mask flags */
+#define I2O_EVT_IND_STATE_CHANGE		0x80000000
+#define I2O_EVT_IND_GENERAL_WARNING		0x40000000
+#define I2O_EVT_IND_CONFIGURATION_FLAG		0x20000000
+#define I2O_EVT_IND_LOCK_RELEASE		0x10000000
+#define I2O_EVT_IND_CAPABILITY_CHANGE		0x08000000
+#define I2O_EVT_IND_DEVICE_RESET		0x04000000
+#define I2O_EVT_IND_EVT_MASK_MODIFIED		0x02000000
+#define I2O_EVT_IND_FIELD_MODIFIED		0x01000000
+#define I2O_EVT_IND_VENDOR_EVT			0x00800000
+#define I2O_EVT_IND_DEVICE_STATE		0x00400000
+
+/* Executive event indicitors */
+#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS	0x00000001
+#define I2O_EVT_IND_EXEC_CONNECTION_FAIL	0x00000002
+#define I2O_EVT_IND_EXEC_ADAPTER_FAULT		0x00000004
+#define I2O_EVT_IND_EXEC_POWER_FAIL		0x00000008
+#define I2O_EVT_IND_EXEC_RESET_PENDING		0x00000010
+#define I2O_EVT_IND_EXEC_RESET_IMMINENT 	0x00000020
+#define I2O_EVT_IND_EXEC_HW_FAIL		0x00000040
+#define I2O_EVT_IND_EXEC_XCT_CHANGE		0x00000080
+#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY		0x00000100
+#define I2O_EVT_IND_EXEC_MODIFIED_LCT		0x00000200
+#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY	0x00000400
+
+/* Random Block Storage Event Indicators */
+#define I2O_EVT_IND_BSA_VOLUME_LOAD		0x00000001
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD		0x00000002
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ	0x00000004
+#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 	0x00000008
+#define I2O_EVT_IND_BSA_SCSI_SMART		0x00000010
+
+/* Event data for generic events */
+#define I2O_EVT_STATE_CHANGE_NORMAL		0x00
+#define I2O_EVT_STATE_CHANGE_SUSPENDED		0x01
+#define I2O_EVT_STATE_CHANGE_RESTART		0x02
+#define I2O_EVT_STATE_CHANGE_NA_RECOVER 	0x03
+#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER	0x04
+#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST	0x05
+#define I2O_EVT_STATE_CHANGE_FAILED		0x10
+#define I2O_EVT_STATE_CHANGE_FAULTED		0x11
+
+#define I2O_EVT_GEN_WARNING_NORMAL		0x00
+#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD	0x01
+#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 	0x02
+
+#define I2O_EVT_CAPABILITY_OTHER		0x01
+#define I2O_EVT_CAPABILITY_CHANGED		0x02
+
+#define I2O_EVT_SENSOR_STATE_CHANGED		0x01
+
+/*
+ *	I2O classes / subclasses
+ */
+
+/*  Class ID and Code Assignments
+ *  (LCT.ClassID.Version field)
+ */
+#define I2O_CLASS_VERSION_10			0x00
+#define I2O_CLASS_VERSION_11			0x01
+
+/*  Class code names
+ *  (from v1.5 Table 6-1 Class Code Assignments.)
+ */
+
+#define I2O_CLASS_EXECUTIVE			0x000
+#define I2O_CLASS_DDM				0x001
+#define I2O_CLASS_RANDOM_BLOCK_STORAGE		0x010
+#define I2O_CLASS_SEQUENTIAL_STORAGE		0x011
+#define I2O_CLASS_LAN				0x020
+#define I2O_CLASS_WAN				0x030
+#define I2O_CLASS_FIBRE_CHANNEL_PORT		0x040
+#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL	0x041
+#define I2O_CLASS_SCSI_PERIPHERAL		0x051
+#define I2O_CLASS_ATE_PORT			0x060
+#define I2O_CLASS_ATE_PERIPHERAL		0x061
+#define I2O_CLASS_FLOPPY_CONTROLLER		0x070
+#define I2O_CLASS_FLOPPY_DEVICE 		0x071
+#define I2O_CLASS_BUS_ADAPTER_PORT		0x080
+#define I2O_CLASS_PEER_TRANSPORT_AGENT		0x090
+#define I2O_CLASS_PEER_TRANSPORT		0x091
+#define	I2O_CLASS_END				0xfff
+
+/*
+ *  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
+ */
+
+#define I2O_CLASS_MATCH_ANYCLASS		0xffffffff
+
+/*
+ *  Subclasses
+ */
+
+#define I2O_SUBCLASS_i960			0x001
+#define I2O_SUBCLASS_HDM			0x020
+#define I2O_SUBCLASS_ISM			0x021
+
+/* Operation functions */
+
+#define I2O_PARAMS_FIELD_GET			0x0001
+#define I2O_PARAMS_LIST_GET			0x0002
+#define I2O_PARAMS_MORE_GET			0x0003
+#define I2O_PARAMS_SIZE_GET			0x0004
+#define I2O_PARAMS_TABLE_GET			0x0005
+#define I2O_PARAMS_FIELD_SET			0x0006
+#define I2O_PARAMS_LIST_SET			0x0007
+#define I2O_PARAMS_ROW_ADD			0x0008
+#define I2O_PARAMS_ROW_DELETE			0x0009
+#define I2O_PARAMS_TABLE_CLEAR			0x000A
+
+/*
+ * I2O serial number conventions / formats
+ * (circa v1.5)
+ */
+
+#define I2O_SNFORMAT_UNKNOWN			0
+#define I2O_SNFORMAT_BINARY			1
+#define I2O_SNFORMAT_ASCII			2
+#define I2O_SNFORMAT_UNICODE			3
+#define I2O_SNFORMAT_LAN48_MAC			4
+#define I2O_SNFORMAT_WAN			5
+
+/*
+ * Plus new in v2.0 (Yellowstone pdf doc)
+ */
+
+#define I2O_SNFORMAT_LAN64_MAC			6
+#define I2O_SNFORMAT_DDM			7
+#define I2O_SNFORMAT_IEEE_REG64 		8
+#define I2O_SNFORMAT_IEEE_REG128		9
+#define I2O_SNFORMAT_UNKNOWN2			0xff
+
+/*
+ *	I2O Get Status State values
+ */
+
+#define ADAPTER_STATE_INITIALIZING		0x01
+#define ADAPTER_STATE_RESET			0x02
+#define ADAPTER_STATE_HOLD			0x04
+#define ADAPTER_STATE_READY			0x05
+#define ADAPTER_STATE_OPERATIONAL		0x08
+#define ADAPTER_STATE_FAILED			0x10
+#define ADAPTER_STATE_FAULTED			0x11
+
+#endif				/* _I2O_DEV_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
new file mode 100644
index 000000000000..ea9a3ad4b67f
--- /dev/null
+++ b/include/linux/i2o.h
@@ -0,0 +1,1003 @@
+/*
+ * I2O kernel space accessible structures/APIs
+ *
+ * (c) Copyright 1999, 2000 Red Hat Software
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *************************************************************************
+ *
+ * This header file defined the I2O APIs/structures for use by
+ * the I2O kernel modules.
+ *
+ */
+
+#ifndef _I2O_H
+#define _I2O_H
+
+#ifdef __KERNEL__		/* This file to be included by kernel only */
+
+#include <linux/i2o-dev.h>
+
+/* How many different OSM's are we allowing */
+#define I2O_MAX_DRIVERS		8
+
+#include <asm/io.h>
+#include <asm/semaphore.h>	/* Needed for MUTEX init macros */
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+/* message queue empty */
+#define I2O_QUEUE_EMPTY		0xffffffff
+
+/*
+ *	Message structures
+ */
+struct i2o_message {
+	union {
+		struct {
+			u8 version_offset;
+			u8 flags;
+			u16 size;
+			u32 target_tid:12;
+			u32 init_tid:12;
+			u32 function:8;
+			u32 icntxt;	/* initiator context */
+			u32 tcntxt;	/* transaction context */
+		} s;
+		u32 head[4];
+	} u;
+	/* List follows */
+	u32 body[0];
+};
+
+/*
+ *	Each I2O device entity has one of these. There is one per device.
+ */
+struct i2o_device {
+	i2o_lct_entry lct_data;	/* Device LCT information */
+
+	struct i2o_controller *iop;	/* Controlling IOP */
+	struct list_head list;	/* node in IOP devices list */
+
+	struct device device;
+
+	struct semaphore lock;	/* device lock */
+
+	struct class_device classdev;	/* i2o device class */
+};
+
+/*
+ *	Event structure provided to the event handling function
+ */
+struct i2o_event {
+	struct work_struct work;
+	struct i2o_device *i2o_dev;	/* I2O device pointer from which the
+					   event reply was initiated */
+	u16 size;		/* Size of data in 32-bit words */
+	u32 tcntxt;		/* Transaction context used at
+				   registration */
+	u32 event_indicator;	/* Event indicator from reply */
+	u32 data[0];		/* Event data from reply */
+};
+
+/*
+ *	I2O classes which could be handled by the OSM
+ */
+struct i2o_class_id {
+	u16 class_id:12;
+};
+
+/*
+ *	I2O driver structure for OSMs
+ */
+struct i2o_driver {
+	char *name;		/* OSM name */
+	int context;		/* Low 8 bits of the transaction info */
+	struct i2o_class_id *classes;	/* I2O classes that this OSM handles */
+
+	/* Message reply handler */
+	int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
+
+	/* Event handler */
+	void (*event) (struct i2o_event *);
+
+	struct workqueue_struct *event_queue;	/* Event queue */
+
+	struct device_driver driver;
+
+	/* notification of changes */
+	void (*notify_controller_add) (struct i2o_controller *);
+	void (*notify_controller_remove) (struct i2o_controller *);
+	void (*notify_device_add) (struct i2o_device *);
+	void (*notify_device_remove) (struct i2o_device *);
+
+	struct semaphore lock;
+};
+
+/*
+ *	Contains all information which are necessary for DMA operations
+ */
+struct i2o_dma {
+	void *virt;
+	dma_addr_t phys;
+	u32 len;
+};
+
+/*
+ *	Context queue entry, used for 32-bit context on 64-bit systems
+ */
+struct i2o_context_list_element {
+	struct list_head list;
+	u32 context;
+	void *ptr;
+	unsigned long timestamp;
+};
+
+/*
+ * Each I2O controller has one of these objects
+ */
+struct i2o_controller {
+	char name[16];
+	int unit;
+	int type;
+
+	struct pci_dev *pdev;	/* PCI device */
+
+	unsigned int short_req:1;	/* use small block sizes */
+	unsigned int no_quiesce:1;	/* dont quiesce before reset */
+	unsigned int raptor:1;		/* split bar */
+	unsigned int promise:1;		/* Promise controller */
+
+#ifdef CONFIG_MTRR
+	int mtrr_reg0;
+	int mtrr_reg1;
+#endif
+
+	struct list_head devices;	/* list of I2O devices */
+
+	struct notifier_block *event_notifer;	/* Events */
+	atomic_t users;
+	struct list_head list;	/* Controller list */
+	void __iomem *post_port;	/* Inbout port address */
+	void __iomem *reply_port;	/* Outbound port address */
+	void __iomem *irq_mask;		/* Interrupt register address */
+
+	/* Dynamic LCT related data */
+
+	struct i2o_dma status;	/* status of IOP */
+
+	struct i2o_dma hrt;	/* HW Resource Table */
+	i2o_lct *lct;		/* Logical Config Table */
+	struct i2o_dma dlct;	/* Temp LCT */
+	struct semaphore lct_lock;	/* Lock for LCT updates */
+	struct i2o_dma status_block;	/* IOP status block */
+
+	struct i2o_dma base;	/* controller messaging unit */
+	struct i2o_dma in_queue;	/* inbound message queue Host->IOP */
+	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
+
+	unsigned int battery:1;		/* Has a battery backup */
+	unsigned int io_alloc:1;	/* An I/O resource was allocated */
+	unsigned int mem_alloc:1;	/* A memory resource was allocated */
+
+	struct resource io_resource;	/* I/O resource allocated to the IOP */
+	struct resource mem_resource;	/* Mem resource allocated to the IOP */
+
+	struct proc_dir_entry *proc_entry;	/* /proc dir */
+
+	struct list_head bus_list;	/* list of busses on IOP */
+	struct device device;
+	struct i2o_device *exec;	/* Executive */
+#if BITS_PER_LONG == 64
+	spinlock_t context_list_lock;	/* lock for context_list */
+	atomic_t context_list_counter;	/* needed for unique contexts */
+	struct list_head context_list;	/* list of context id's
+					   and pointers */
+#endif
+	spinlock_t lock;	/* lock for controller
+				   configuration */
+
+	void *driver_data[I2O_MAX_DRIVERS];	/* storage for drivers */
+};
+
+/*
+ * I2O System table entry
+ *
+ * The system table contains information about all the IOPs in the
+ * system.  It is sent to all IOPs so that they can create peer2peer
+ * connections between them.
+ */
+struct i2o_sys_tbl_entry {
+	u16 org_id;
+	u16 reserved1;
+	u32 iop_id:12;
+	u32 reserved2:20;
+	u16 seg_num:12;
+	u16 i2o_version:4;
+	u8 iop_state;
+	u8 msg_type;
+	u16 frame_size;
+	u16 reserved3;
+	u32 last_changed;
+	u32 iop_capabilities;
+	u32 inbound_low;
+	u32 inbound_high;
+};
+
+struct i2o_sys_tbl {
+	u8 num_entries;
+	u8 version;
+	u16 reserved1;
+	u32 change_ind;
+	u32 reserved2;
+	u32 reserved3;
+	struct i2o_sys_tbl_entry iops[0];
+};
+
+extern struct list_head i2o_controllers;
+
+/* Message functions */
+static inline u32 i2o_msg_get(struct i2o_controller *, struct i2o_message __iomem **);
+extern u32 i2o_msg_get_wait(struct i2o_controller *, struct i2o_message __iomem **,
+			    int);
+static inline void i2o_msg_post(struct i2o_controller *, u32);
+static inline int i2o_msg_post_wait(struct i2o_controller *, u32,
+				    unsigned long);
+extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long,
+				 struct i2o_dma *);
+extern void i2o_msg_nop(struct i2o_controller *, u32);
+static inline void i2o_flush_reply(struct i2o_controller *, u32);
+
+/* DMA handling functions */
+static inline int i2o_dma_alloc(struct device *, struct i2o_dma *, size_t,
+				unsigned int);
+static inline void i2o_dma_free(struct device *, struct i2o_dma *);
+int i2o_dma_realloc(struct device *, struct i2o_dma *, size_t, unsigned int);
+
+static inline int i2o_dma_map(struct device *, struct i2o_dma *);
+static inline void i2o_dma_unmap(struct device *, struct i2o_dma *);
+
+/* IOP functions */
+extern int i2o_status_get(struct i2o_controller *);
+
+extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
+			      u32);
+extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
+extern struct i2o_controller *i2o_find_iop(int);
+
+/* Functions needed for handling 64-bit pointers in 32-bit context */
+#if BITS_PER_LONG == 64
+extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
+extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
+extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
+extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
+
+static inline u32 i2o_ptr_low(void *ptr)
+{
+	return (u32) (u64) ptr;
+};
+
+static inline u32 i2o_ptr_high(void *ptr)
+{
+	return (u32) ((u64) ptr >> 32);
+};
+#else
+static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
+{
+	return (void *)context;
+};
+
+static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_low(void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_high(void *ptr)
+{
+	return 0;
+};
+#endif
+
+/* I2O driver (OSM) functions */
+extern int i2o_driver_register(struct i2o_driver *);
+extern void i2o_driver_unregister(struct i2o_driver *);
+
+/**
+ *	i2o_driver_notify_controller_add - Send notification of added controller
+ *					   to a single I2O driver
+ *
+ *	Send notification of added controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
+						    struct i2o_controller *c)
+{
+	if (drv->notify_controller_add)
+		drv->notify_controller_add(c);
+};
+
+/**
+ *	i2o_driver_notify_controller_remove - Send notification of removed
+ *					      controller to a single I2O driver
+ *
+ *	Send notification of removed controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
+						       struct i2o_controller *c)
+{
+	if (drv->notify_controller_remove)
+		drv->notify_controller_remove(c);
+};
+
+/**
+ *	i2o_driver_notify_device_add - Send notification of added device to a
+ *				       single I2O driver
+ *
+ *	Send notification of added device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
+						struct i2o_device *i2o_dev)
+{
+	if (drv->notify_device_add)
+		drv->notify_device_add(i2o_dev);
+};
+
+/**
+ *	i2o_driver_notify_device_remove - Send notification of removed device
+ *					  to a single I2O driver
+ *
+ *	Send notification of removed device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
+						   struct i2o_device *i2o_dev)
+{
+	if (drv->notify_device_remove)
+		drv->notify_device_remove(i2o_dev);
+};
+
+extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
+extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
+extern void i2o_driver_notify_device_add_all(struct i2o_device *);
+extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
+
+/* I2O device functions */
+extern int i2o_device_claim(struct i2o_device *);
+extern int i2o_device_claim_release(struct i2o_device *);
+
+/* Exec OSM functions */
+extern int i2o_exec_lct_get(struct i2o_controller *);
+
+/* device to i2o_device and driver to i2o_driver convertion functions */
+#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
+#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
+
+/*
+ *	Messenger inlines
+ */
+static inline u32 I2O_POST_READ32(struct i2o_controller *c)
+{
+	rmb();
+	return readl(c->post_port);
+};
+
+static inline void I2O_POST_WRITE32(struct i2o_controller *c, u32 val)
+{
+	wmb();
+	writel(val, c->post_port);
+};
+
+static inline u32 I2O_REPLY_READ32(struct i2o_controller *c)
+{
+	rmb();
+	return readl(c->reply_port);
+};
+
+static inline void I2O_REPLY_WRITE32(struct i2o_controller *c, u32 val)
+{
+	wmb();
+	writel(val, c->reply_port);
+};
+
+static inline u32 I2O_IRQ_READ32(struct i2o_controller *c)
+{
+	rmb();
+	return readl(c->irq_mask);
+};
+
+static inline void I2O_IRQ_WRITE32(struct i2o_controller *c, u32 val)
+{
+	wmb();
+	writel(val, c->irq_mask);
+	wmb();
+};
+
+/**
+ *	i2o_msg_get - obtain an I2O message from the IOP
+ *	@c: I2O controller
+ *	@msg: pointer to a I2O message pointer
+ *
+ *	This function tries to get a message slot. If no message slot is
+ *	available do not wait until one is availabe (see also i2o_msg_get_wait).
+ *
+ *	On a success the message is returned and the pointer to the message is
+ *	set in msg. The returned message is the physical page frame offset
+ *	address from the read port (see the i2o spec). If no message is
+ *	available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
+ */
+static inline u32 i2o_msg_get(struct i2o_controller *c,
+			      struct i2o_message __iomem **msg)
+{
+	u32 m;
+
+	if ((m = I2O_POST_READ32(c)) != I2O_QUEUE_EMPTY)
+		*msg = c->in_queue.virt + m;
+
+	return m;
+};
+
+/**
+ *	i2o_msg_post - Post I2O message to I2O controller
+ *	@c: I2O controller to which the message should be send
+ *	@m: the message identifier
+ *
+ *	Post the message to the I2O controller.
+ */
+static inline void i2o_msg_post(struct i2o_controller *c, u32 m)
+{
+	I2O_POST_WRITE32(c, m);
+};
+
+/**
+ * 	i2o_msg_post_wait - Post and wait a message and wait until return
+ *	@c: controller
+ *	@m: message to post
+ *	@timeout: time in seconds to wait
+ *
+ * 	This API allows an OSM to post a message and then be told whether or
+ *	not the system received a successful reply. If the message times out
+ *	then the value '-ETIMEDOUT' is returned.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m,
+				    unsigned long timeout)
+{
+	return i2o_msg_post_wait_mem(c, m, timeout, NULL);
+};
+
+/**
+ *	i2o_flush_reply - Flush reply from I2O controller
+ *	@c: I2O controller
+ *	@m: the message identifier
+ *
+ *	The I2O controller must be informed that the reply message is not needed
+ *	anymore. If you forget to flush the reply, the message frame can't be
+ *	used by the controller anymore and is therefore lost.
+ *
+ *	FIXME: is there a timeout after which the controller reuse the message?
+ */
+static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+{
+	I2O_REPLY_WRITE32(c, m);
+};
+
+/**
+ *	i2o_out_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a receive message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for sender side messages as they are ioremap objects
+ *	provided by the I2O controller.
+ */
+static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
+						      u32 m)
+{
+	BUG_ON(m < c->out_queue.phys
+	       || m >= c->out_queue.phys + c->out_queue.len);
+
+	return c->out_queue.virt + (m - c->out_queue.phys);
+};
+
+/**
+ *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a send message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for receive side messages as they are kmalloc objects
+ *	in a different pool.
+ */
+static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controller *c,
+						     u32 m)
+{
+	return c->in_queue.virt + m;
+};
+
+/**
+ *	i2o_dma_alloc - Allocate DMA memory
+ *	@dev: struct device pointer to the PCI device of the I2O controller
+ *	@addr: i2o_dma struct which should get the DMA buffer
+ *	@len: length of the new DMA memory
+ *	@gfp_mask: GFP mask
+ *
+ *	Allocate a coherent DMA memory and write the pointers into addr.
+ *
+ *	Returns 0 on success or -ENOMEM on failure.
+ */
+static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
+				size_t len, unsigned int gfp_mask)
+{
+	addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+	if (!addr->virt)
+		return -ENOMEM;
+
+	memset(addr->virt, 0, len);
+	addr->len = len;
+
+	return 0;
+};
+
+/**
+ *	i2o_dma_free - Free DMA memory
+ *	@dev: struct device pointer to the PCI device of the I2O controller
+ *	@addr: i2o_dma struct which contains the DMA buffer
+ *
+ *	Free a coherent DMA memory and set virtual address of addr to NULL.
+ */
+static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
+{
+	if (addr->virt) {
+		if (addr->phys)
+			dma_free_coherent(dev, addr->len, addr->virt,
+					  addr->phys);
+		else
+			kfree(addr->virt);
+		addr->virt = NULL;
+	}
+};
+
+/**
+ *	i2o_dma_map - Map the memory to DMA
+ *	@dev: struct device pointer to the PCI device of the I2O controller
+ *	@addr: i2o_dma struct which should be mapped
+ *
+ *	Map the memory in addr->virt to coherent DMA memory and write the
+ *	physical address into addr->phys.
+ *
+ *	Returns 0 on success or -ENOMEM on failure.
+ */
+static inline int i2o_dma_map(struct device *dev, struct i2o_dma *addr)
+{
+	if (!addr->virt)
+		return -EFAULT;
+
+	if (!addr->phys)
+		addr->phys = dma_map_single(dev, addr->virt, addr->len,
+					    DMA_BIDIRECTIONAL);
+	if (!addr->phys)
+		return -ENOMEM;
+
+	return 0;
+};
+
+/**
+ *	i2o_dma_unmap - Unmap the DMA memory
+ *	@dev: struct device pointer to the PCI device of the I2O controller
+ *	@addr: i2o_dma struct which should be unmapped
+ *
+ *	Unmap the memory in addr->virt from DMA memory.
+ */
+static inline void i2o_dma_unmap(struct device *dev, struct i2o_dma *addr)
+{
+	if (!addr->virt)
+		return;
+
+	if (addr->phys) {
+		dma_unmap_single(dev, addr->phys, addr->len, DMA_BIDIRECTIONAL);
+		addr->phys = 0;
+	}
+};
+
+/*
+ *	Endian handling wrapped into the macro - keeps the core code
+ *	cleaner.
+ */
+
+#define i2o_raw_writel(val, mem)	__raw_writel(cpu_to_le32(val), mem)
+
+extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
+extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
+			      void *, int);
+
+/* debugging and troubleshooting/diagnostic helpers. */
+#define osm_printk(level, format, arg...)  \
+	printk(level "%s: " format, OSM_NAME , ## arg)
+
+#ifdef DEBUG
+#define osm_debug(format, arg...) \
+	osm_printk(KERN_DEBUG, format , ## arg)
+#else
+#define osm_debug(format, arg...) \
+        do { } while (0)
+#endif
+
+#define osm_err(format, arg...)		\
+	osm_printk(KERN_ERR, format , ## arg)
+#define osm_info(format, arg...)		\
+	osm_printk(KERN_INFO, format , ## arg)
+#define osm_warn(format, arg...)		\
+	osm_printk(KERN_WARNING, format , ## arg)
+
+/* debugging functions */
+extern void i2o_report_status(const char *, const char *, struct i2o_message *);
+extern void i2o_dump_message(struct i2o_message *);
+extern void i2o_dump_hrt(struct i2o_controller *c);
+extern void i2o_debug_state(struct i2o_controller *c);
+
+/*
+ *	Cache strategies
+ */
+
+/*	The NULL strategy leaves everything up to the controller. This tends to be a
+ *	pessimal but functional choice.
+ */
+#define CACHE_NULL		0
+/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
+ *	into the controller cache.
+ */
+#define CACHE_PREFETCH		1
+/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
+ *	into the controller cache. When an I/O is less <= 8K we assume its probably
+ *	not sequential and don't prefetch (default)
+ */
+#define CACHE_SMARTFETCH	2
+/*	Data is written to the cache and then out on to the disk. The I/O must be
+ *	physically on the medium before the write is acknowledged (default without
+ *	NVRAM)
+ */
+#define CACHE_WRITETHROUGH	17
+/*	Data is written to the cache and then out on to the disk. The controller
+ *	is permitted to write back the cache any way it wants. (default if battery
+ *	backed NVRAM is present). It can be useful to set this for swap regardless of
+ *	battery state.
+ */
+#define CACHE_WRITEBACK		18
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writeback cached
+ */
+#define CACHE_SMARTBACK		19
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writethrough cached. Suitable for devices
+ *	lacking battery backup
+ */
+#define CACHE_SMARTTHROUGH	20
+
+/*
+ *	Ioctl structures
+ */
+
+#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
+#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
+#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
+#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
+
+/*
+ *	I2O Function codes
+ */
+
+/*
+ *	Executive Class
+ */
+#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
+#define	I2O_CMD_ADAPTER_READ		0xB2
+#define	I2O_CMD_ADAPTER_RELEASE		0xB5
+#define	I2O_CMD_BIOS_INFO_SET		0xA5
+#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
+#define	I2O_CMD_CONFIG_VALIDATE		0xBB
+#define	I2O_CMD_CONN_SETUP		0xCA
+#define	I2O_CMD_DDM_DESTROY		0xB1
+#define	I2O_CMD_DDM_ENABLE		0xD5
+#define	I2O_CMD_DDM_QUIESCE		0xC7
+#define	I2O_CMD_DDM_RESET		0xD9
+#define	I2O_CMD_DDM_SUSPEND		0xAF
+#define	I2O_CMD_DEVICE_ASSIGN		0xB7
+#define	I2O_CMD_DEVICE_RELEASE		0xB9
+#define	I2O_CMD_HRT_GET			0xA8
+#define	I2O_CMD_ADAPTER_CLEAR		0xBE
+#define	I2O_CMD_ADAPTER_CONNECT		0xC9
+#define	I2O_CMD_ADAPTER_RESET		0xBD
+#define	I2O_CMD_LCT_NOTIFY		0xA2
+#define	I2O_CMD_OUTBOUND_INIT		0xA1
+#define	I2O_CMD_PATH_ENABLE		0xD3
+#define	I2O_CMD_PATH_QUIESCE		0xC5
+#define	I2O_CMD_PATH_RESET		0xD7
+#define	I2O_CMD_STATIC_MF_CREATE	0xDD
+#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
+#define	I2O_CMD_STATUS_GET		0xA0
+#define	I2O_CMD_SW_DOWNLOAD		0xA9
+#define	I2O_CMD_SW_UPLOAD		0xAB
+#define	I2O_CMD_SW_REMOVE		0xAD
+#define	I2O_CMD_SYS_ENABLE		0xD1
+#define	I2O_CMD_SYS_MODIFY		0xC1
+#define	I2O_CMD_SYS_QUIESCE		0xC3
+#define	I2O_CMD_SYS_TAB_SET		0xA3
+
+/*
+ * Utility Class
+ */
+#define I2O_CMD_UTIL_NOP		0x00
+#define I2O_CMD_UTIL_ABORT		0x01
+#define I2O_CMD_UTIL_CLAIM		0x09
+#define I2O_CMD_UTIL_RELEASE		0x0B
+#define I2O_CMD_UTIL_PARAMS_GET		0x06
+#define I2O_CMD_UTIL_PARAMS_SET		0x05
+#define I2O_CMD_UTIL_EVT_REGISTER	0x13
+#define I2O_CMD_UTIL_EVT_ACK		0x14
+#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
+#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
+#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
+#define I2O_CMD_UTIL_LOCK		0x17
+#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
+#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
+
+/*
+ * SCSI Host Bus Adapter Class
+ */
+#define I2O_CMD_SCSI_EXEC		0x81
+#define I2O_CMD_SCSI_ABORT		0x83
+#define I2O_CMD_SCSI_BUSRESET		0x27
+
+/*
+ * Random Block Storage Class
+ */
+#define I2O_CMD_BLOCK_READ		0x30
+#define I2O_CMD_BLOCK_WRITE		0x31
+#define I2O_CMD_BLOCK_CFLUSH		0x37
+#define I2O_CMD_BLOCK_MLOCK		0x49
+#define I2O_CMD_BLOCK_MUNLOCK		0x4B
+#define I2O_CMD_BLOCK_MMOUNT		0x41
+#define I2O_CMD_BLOCK_MEJECT		0x43
+#define I2O_CMD_BLOCK_POWER		0x70
+
+#define I2O_PRIVATE_MSG			0xFF
+
+/* Command status values  */
+
+#define I2O_CMD_IN_PROGRESS	0x01
+#define I2O_CMD_REJECTED	0x02
+#define I2O_CMD_FAILED		0x03
+#define I2O_CMD_COMPLETED	0x04
+
+/* I2O API function return values */
+
+#define I2O_RTN_NO_ERROR			0
+#define I2O_RTN_NOT_INIT			1
+#define I2O_RTN_FREE_Q_EMPTY			2
+#define I2O_RTN_TCB_ERROR			3
+#define I2O_RTN_TRANSACTION_ERROR		4
+#define I2O_RTN_ADAPTER_ALREADY_INIT		5
+#define I2O_RTN_MALLOC_ERROR			6
+#define I2O_RTN_ADPTR_NOT_REGISTERED		7
+#define I2O_RTN_MSG_REPLY_TIMEOUT		8
+#define I2O_RTN_NO_STATUS			9
+#define I2O_RTN_NO_FIRM_VER			10
+#define	I2O_RTN_NO_LINK_SPEED			11
+
+/* Reply message status defines for all messages */
+
+#define I2O_REPLY_STATUS_SUCCESS                    	0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
+#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
+#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
+#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
+#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
+#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
+#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
+
+/* Status codes and Error Information for Parameter functions */
+
+#define I2O_PARAMS_STATUS_SUCCESS		0x00
+#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
+#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
+#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
+#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
+#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
+#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
+#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
+#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
+#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
+#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
+#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
+#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
+#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
+#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
+#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
+
+/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
+ * messages: Table 3-2 Detailed Status Codes.*/
+
+#define I2O_DSC_SUCCESS                        0x0000
+#define I2O_DSC_BAD_KEY                        0x0002
+#define I2O_DSC_TCL_ERROR                      0x0003
+#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
+#define I2O_DSC_NO_SUCH_PAGE                   0x0005
+#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
+#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
+#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
+#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
+#define I2O_DSC_DEVICE_LOCKED                  0x000B
+#define I2O_DSC_DEVICE_RESET                   0x000C
+#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
+#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
+#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
+#define I2O_DSC_INVALID_OFFSET                 0x0010
+#define I2O_DSC_INVALID_PARAMETER              0x0011
+#define I2O_DSC_INVALID_REQUEST                0x0012
+#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
+#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
+#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
+#define I2O_DSC_MISSING_PARAMETER              0x0016
+#define I2O_DSC_TIMEOUT                        0x0017
+#define I2O_DSC_UNKNOWN_ERROR                  0x0018
+#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
+#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
+#define I2O_DSC_DEVICE_BUSY                    0x001B
+#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
+
+/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
+   Status Codes.*/
+
+#define I2O_BSA_DSC_SUCCESS               0x0000
+#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
+#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
+#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
+#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
+#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
+#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
+#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
+#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
+#define I2O_BSA_DSC_BUS_FAILURE           0x0009
+#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
+#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
+#define I2O_BSA_DSC_DEVICE_RESET          0x000C
+#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
+#define I2O_BSA_DSC_TIMEOUT               0x000E
+
+/* FailureStatusCodes, Table 3-3 Message Failure Codes */
+
+#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
+#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
+#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
+#define I2O_FSC_TRANSPORT_FAILURE                       0x84
+#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
+#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
+#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
+#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
+#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
+#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
+#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
+#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
+#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
+#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
+
+/* Device Claim Types */
+#define	I2O_CLAIM_PRIMARY					0x01000000
+#define	I2O_CLAIM_MANAGEMENT					0x02000000
+#define	I2O_CLAIM_AUTHORIZED					0x03000000
+#define	I2O_CLAIM_SECONDARY					0x04000000
+
+/* Message header defines for VersionOffset */
+#define I2OVER15	0x0001
+#define I2OVER20	0x0002
+
+/* Default is 1.5, FIXME: Need support for both 1.5 and 2.0 */
+#define I2OVERSION	I2OVER15
+
+#define SGL_OFFSET_0    I2OVERSION
+#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
+#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
+#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
+#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
+#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
+#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
+#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
+
+#define TRL_OFFSET_5    (0x0050 | I2OVERSION)
+#define TRL_OFFSET_6    (0x0060 | I2OVERSION)
+
+/* Transaction Reply Lists (TRL) Control Word structure */
+#define TRL_SINGLE_FIXED_LENGTH		0x00
+#define TRL_SINGLE_VARIABLE_LENGTH	0x40
+#define TRL_MULTIPLE_FIXED_LENGTH	0x80
+
+ /* msg header defines for MsgFlags */
+#define MSG_STATIC	0x0100
+#define MSG_64BIT_CNTXT	0x0200
+#define MSG_MULTI_TRANS	0x1000
+#define MSG_FAIL	0x2000
+#define MSG_FINAL	0x4000
+#define MSG_REPLY	0x8000
+
+ /* minimum size msg */
+#define THREE_WORD_MSG_SIZE	0x00030000
+#define FOUR_WORD_MSG_SIZE	0x00040000
+#define FIVE_WORD_MSG_SIZE	0x00050000
+#define SIX_WORD_MSG_SIZE	0x00060000
+#define SEVEN_WORD_MSG_SIZE	0x00070000
+#define EIGHT_WORD_MSG_SIZE	0x00080000
+#define NINE_WORD_MSG_SIZE	0x00090000
+#define TEN_WORD_MSG_SIZE	0x000A0000
+#define ELEVEN_WORD_MSG_SIZE	0x000B0000
+#define I2O_MESSAGE_SIZE(x)	((x)<<16)
+
+/* Special TID Assignments */
+
+#define ADAPTER_TID		0
+#define HOST_TID		1
+
+#define MSG_FRAME_SIZE		128	/* i2o_scsi assumes >= 32 */
+#define REPLY_FRAME_SIZE	17
+#define SG_TABLESIZE		30
+#define NMBR_MSG_FRAMES		128
+
+#define MSG_POOL_SIZE		(MSG_FRAME_SIZE*NMBR_MSG_FRAMES*sizeof(u32))
+
+#define I2O_POST_WAIT_OK	0
+#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
+
+#define I2O_CONTEXT_LIST_MIN_LENGTH	15
+#define I2O_CONTEXT_LIST_USED		0x01
+#define I2O_CONTEXT_LIST_DELETED	0x02
+
+/* timeouts */
+#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
+#define I2O_TIMEOUT_MESSAGE_GET		5
+#define I2O_TIMEOUT_RESET		30
+#define I2O_TIMEOUT_STATUS_GET		5
+#define I2O_TIMEOUT_LCT_GET		360
+#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
+
+/* retries */
+#define I2O_HRT_GET_TRIES		3
+#define I2O_LCT_GET_TRIES		3
+
+/* request queue sizes */
+#define I2O_MAX_SECTORS			1024
+#define I2O_MAX_SEGMENTS		128
+
+#define I2O_REQ_MEMPOOL_SIZE		32
+
+#endif				/* __KERNEL__ */
+#endif				/* _I2O_H */
diff --git a/include/linux/i8k.h b/include/linux/i8k.h
new file mode 100644
index 000000000000..1c45ba505115
--- /dev/null
+++ b/include/linux/i8k.h
@@ -0,0 +1,46 @@
+/*
+ * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
+ *
+ * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _LINUX_I8K_H
+#define _LINUX_I8K_H
+
+#define I8K_PROC		"/proc/i8k"
+#define I8K_PROC_FMT		"1.0"
+
+#define I8K_BIOS_VERSION	_IOR ('i', 0x80, int)	/* broken: meant 4 bytes */
+#define I8K_MACHINE_ID		_IOR ('i', 0x81, int)	/* broken: meant 16 bytes */
+#define I8K_POWER_STATUS	_IOR ('i', 0x82, size_t)
+#define I8K_FN_STATUS		_IOR ('i', 0x83, size_t)
+#define I8K_GET_TEMP		_IOR ('i', 0x84, size_t)
+#define I8K_GET_SPEED		_IOWR('i', 0x85, size_t)
+#define I8K_GET_FAN		_IOWR('i', 0x86, size_t)
+#define I8K_SET_FAN		_IOWR('i', 0x87, size_t)
+
+#define I8K_FAN_LEFT		1
+#define I8K_FAN_RIGHT		0
+#define I8K_FAN_OFF		0
+#define I8K_FAN_LOW		1
+#define I8K_FAN_HIGH		2
+#define I8K_FAN_MAX		I8K_FAN_HIGH
+
+#define I8K_VOL_UP		1
+#define I8K_VOL_DOWN		2
+#define I8K_VOL_MUTE		4
+
+#define I8K_AC			1
+#define I8K_BATTERY		0
+
+#endif
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h
new file mode 100644
index 000000000000..2ef0b21517fb
--- /dev/null
+++ b/include/linux/ibmtr.h
@@ -0,0 +1,373 @@
+#ifndef __LINUX_IBMTR_H__
+#define __LINUX_IBMTR_H__
+
+/* Definitions for an IBM Token Ring card. */
+/* This file is distributed under the GNU GPL   */
+
+/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
+
+#define TR_RETRY_INTERVAL	(30*HZ)	/* 500 on PC = 5 s */
+#define TR_RST_TIME		(HZ/20) /* 5 on PC = 50 ms */
+#define TR_BUSY_INTERVAL	(HZ/5)	/* 5 on PC = 200 ms */
+#define TR_SPIN_INTERVAL	(3*HZ)	/* 3 seconds before init timeout */
+
+#define TR_ISA 1
+#define TR_MCA 2
+#define TR_ISAPNP 3
+#define NOTOK 0
+
+#define IBMTR_SHARED_RAM_SIZE 0x10000
+#define IBMTR_IO_EXTENT 4
+#define IBMTR_MAX_ADAPTERS 4
+
+#define CHANNEL_ID      0X1F30
+#define AIP             0X1F00
+#define AIPADAPTYPE     0X1FA0
+#define AIPDATARATE     0X1FA2
+#define AIPEARLYTOKEN   0X1FA4
+#define AIPAVAILSHRAM   0X1FA6
+#define AIPSHRAMPAGE    0X1FA8
+#define AIP4MBDHB       0X1FAA
+#define AIP16MBDHB      0X1FAC
+#define AIPFID		0X1FBA
+
+#define ADAPTRESET      0x1     /* Control Adapter reset (add to base) */
+#define ADAPTRESETREL   0x2     /* Release Adapter from reset ( """)  */
+#define ADAPTINTREL	0x3 	/* Adapter interrupt release */
+
+#define GLOBAL_INT_ENABLE 0x02f0
+
+/* MMIO bits 0-4 select register */
+#define RRR_EVEN       0x00 /* Shared RAM relocation registers - even and odd */
+/* Used to set the starting address of shared RAM  */
+/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
+   RAM address.*/
+/* ie: 0x02 sets RAM address to ...ato!  issy su wazzoo !! GODZILLA!!! */
+#define RRR_ODD         0x01
+/* Bits 2 and 3 of this register can be read to determine shared RAM size */
+/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k  */
+#define WRBR_EVEN       0x02    /* Write region base registers - even and odd */
+#define WRBR_ODD        0x03
+#define WWOR_EVEN       0x04    /* Write window open registers - even and odd */
+#define WWOR_ODD        0x05
+#define WWCR_EVEN       0x06   /* Write window close registers - even and odd */
+#define WWCR_ODD        0x07
+
+/* Interrupt status registers - PC system  - even and odd */
+#define ISRP_EVEN       0x08
+
+#define TCR_INT    0x10    /* Bit 4 - Timer interrupt.  The TVR_EVEN timer has
+                                                                   expired. */
+#define ERR_INT	   0x08    /* Bit 3 - Error interrupt.  The adapter has had an
+                                                            internal error. */
+#define ACCESS_INT 0x04    /* Bit 2 - Access interrupt.  You have attempted to
+				      write to an invalid area of shared RAM
+				      or an invalid register within the MMIO. */
+/* In addition, the following bits within ISRP_EVEN can be turned on or off   */
+/* by you to control the interrupt processing:   */
+#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable.  If 0, no interrupts will
+                                   occur.  If 1, interrupts will occur normally.
+                                                         Normally set to 1.  */
+/* Bit 0 - Primary or alternate adapter.  Set to zero if this adapter is the
+		primary adapter, 1 if this adapter is the alternate adapter. */
+
+
+#define ISRP_ODD        0x09
+
+#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check.  the adapter has
+                             encountered a serious problem and has closed
+                             itself.  Whoa.  */
+#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response.  The adapter has accepted
+                             an SRB request and set the return code within
+                             the SRB. */
+#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free.  The adapter has read the ASB
+                             and this area can be safely reused. This interrupt
+                             is only used if your application has set the ASB
+                             free request bit in ISRA_ODD or if an error was
+                             detected in your response. */
+#define ARB_CMD_INT  0x08 /* Bit 3 - ARB command.  The adapter has given you a
+                             command for action.  The command is located in the
+                             ARB area of shared memory. */
+#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response.  The adapter has posted a
+                             response to your SRB (the response is located in
+                             the SSB area of shared memory). */
+/* Bit 1 - Bridge frame forward complete. */
+
+
+
+#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter  - even and odd */
+/* Bit 7 - Internal parity error (on adapter's internal bus) */
+/* Bit 6 - Timer interrupt pending */
+/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
+/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
+/* Bit 3 - Adapter processor check status */
+/* Bit 2 - Reserved */
+/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
+/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
+
+#define ISRA_ODD        0x0B
+#define CMD_IN_SRB  0x20 /* Bit 5  - Indicates that you have placed a new
+                           command in the SRB and are ready for the adapter to
+                           process the command. */
+#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
+                            (an ASB) in the shared RAM which is available for
+                            the adapter's use. */
+/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
+	that a previous command is still pending.  The adapter will then
+	interrupt you when the previous command is completed */
+/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
+	that a previous ASB is still pending.  The adapter will then interrupt
+	you when the previous ASB is copied.  */
+#define ARB_FREE 0x2
+#define SSB_FREE 0x1
+
+#define TCR_EVEN        0x0C    /* Timer control registers - even and odd */
+#define TCR_ODD         0x0D
+#define TVR_EVEN        0x0E    /* Timer value registers - even and odd */
+#define TVR_ODD         0x0F
+#define SRPR_EVEN       0x18    /* Shared RAM paging registers - even and odd */
+#define SRPR_ENABLE_PAGING 0xc0
+#define SRPR_ODD        0x19	/* Not used. */
+#define TOKREAD         0x60
+#define TOKOR           0x40
+#define TOKAND          0x20
+#define TOKWRITE        0x00
+
+/* MMIO bits 5-6 select operation */
+/* 00 is used to write to a register */
+/* 01 is used to bitwise AND a byte with a register */
+/* 10 is used to bitwise OR a byte with a register  */
+/* 11 is used to read from a register */
+
+/* MMIO bits 7-8 select area of interest.. see below */
+/* 00 selects attachment control area. */
+/* 01 is reserved. */
+/* 10 selects adapter identification area A containing the adapter encoded
+	address. */
+/* 11 selects the adapter identification area B containing test patterns. */
+
+#define PCCHANNELID 5049434F3631313039393020
+#define MCCHANNELID 4D4152533633583435313820
+
+#define ACA_OFFSET 0x1e00
+#define ACA_SET 0x40
+#define ACA_RESET 0x20
+#define ACA_RW 0x00
+
+#ifdef ENABLE_PAGING
+#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
+#else
+#define SET_PAGE(x)
+#endif
+
+/* do_tok_int possible values */
+#define FIRST_INT 1
+#define NOT_FIRST 2
+
+typedef enum {	CLOSED,	OPEN } open_state;
+//staic const char *printstate[] = { "CLOSED","OPEN"};
+
+struct tok_info {
+	unsigned char irq;
+	void __iomem *mmio;
+	unsigned char hw_address[32];
+	unsigned char adapter_type;
+	unsigned char data_rate;
+	unsigned char token_release;
+	unsigned char avail_shared_ram;
+	unsigned char shared_ram_paging;
+        unsigned char turbo;
+	unsigned short dhb_size4mb;
+	unsigned short rbuf_len4;
+	unsigned short rbuf_cnt4;
+	unsigned short maxmtu4;
+	unsigned short dhb_size16mb;
+	unsigned short rbuf_len16;
+	unsigned short rbuf_cnt16;
+	unsigned short maxmtu16;
+	/* Additions by David Morris       */
+	unsigned char do_tok_int;
+	wait_queue_head_t wait_for_reset;
+	unsigned char sram_base;
+	/* Additions by Peter De Schrijver */
+	unsigned char page_mask;          /* mask to select RAM page to Map*/
+	unsigned char mapped_ram_size;    /* size of RAM page */
+	__u32 sram_phys;          /* Shared memory base address */
+	void __iomem *sram_virt;          /* Shared memory base address */
+	void __iomem *init_srb;   /* Initial System Request Block address */
+	void __iomem *srb;                /* System Request Block address */
+	void __iomem *ssb;                /* System Status Block address */
+	void __iomem *arb;                /* Adapter Request Block address */
+	void __iomem *asb;                /* Adapter Status Block address */
+        __u8  init_srb_page;
+        __u8  srb_page;
+        __u8  ssb_page;
+        __u8  arb_page;
+        __u8  asb_page;
+	unsigned short exsap_station_id;
+	unsigned short global_int_enable;
+	struct sk_buff *current_skb;
+	struct net_device_stats tr_stats;
+	unsigned char auto_speedsave;
+	open_state			open_status, sap_status;
+	enum {MANUAL, AUTOMATIC}	open_mode;
+	enum {FAIL, RESTART, REOPEN}	open_action;
+	enum {NO, YES}			open_failure;
+	unsigned char readlog_pending;
+	unsigned short adapter_int_enable; /* Adapter-specific int enable */
+        struct timer_list tr_timer;
+	unsigned char ring_speed;
+	spinlock_t lock;		/* SMP protection */
+};
+
+/* token ring adapter commands */
+#define DIR_INTERRUPT 		0x00 /* struct srb_interrupt */
+#define DIR_MOD_OPEN_PARAMS 	0x01
+#define DIR_OPEN_ADAPTER 	0x03 /* struct dir_open_adapter */
+#define DIR_CLOSE_ADAPTER   	0x04
+#define DIR_SET_GRP_ADDR    	0x06
+#define DIR_SET_FUNC_ADDR   	0x07 /* struct srb_set_funct_addr */
+#define DIR_READ_LOG 		0x08 /* struct srb_read_log */
+#define DLC_OPEN_SAP 		0x15 /* struct dlc_open_sap */
+#define DLC_CLOSE_SAP       	0x16
+#define DATA_LOST 		0x20 /* struct asb_rec */
+#define REC_DATA 		0x81 /* struct arb_rec_req */
+#define XMIT_DATA_REQ 		0x82 /* struct arb_xmit_req */
+#define DLC_STATUS 		0x83 /* struct arb_dlc_status */
+#define RING_STAT_CHANGE    	0x84 /* struct dlc_open_sap ??? */
+
+/* DIR_OPEN_ADAPTER options */
+#define OPEN_PASS_BCON_MAC 0x0100
+#define NUM_RCV_BUF 2
+#define RCV_BUF_LEN 1024
+#define DHB_LENGTH 2048
+#define NUM_DHB 2
+#define DLC_MAX_SAP 2
+#define DLC_MAX_STA 1
+
+/* DLC_OPEN_SAP options */
+#define MAX_I_FIELD 0x0088
+#define SAP_OPEN_IND_SAP 0x04
+#define SAP_OPEN_PRIORITY 0x20
+#define SAP_OPEN_STATION_CNT 0x1
+#define XMIT_DIR_FRAME 0x0A
+#define XMIT_UI_FRAME  0x0d
+#define XMIT_XID_CMD   0x0e
+#define XMIT_TEST_CMD  0x11
+
+/* srb close return code */
+#define SIGNAL_LOSS  0x8000
+#define HARD_ERROR   0x4000
+#define XMIT_BEACON  0x1000
+#define LOBE_FAULT   0x0800
+#define AUTO_REMOVAL 0x0400
+#define REMOVE_RECV  0x0100
+#define LOG_OVERFLOW 0x0080
+#define RING_RECOVER 0x0020
+
+struct srb_init_response {
+	unsigned char command;
+	unsigned char init_status;
+	unsigned char init_status_2;
+	unsigned char reserved[3];
+	__u16 bring_up_code;
+	__u16 encoded_address;
+	__u16 level_address;
+	__u16 adapter_address;
+	__u16 parms_address;
+	__u16 mac_address;
+};
+
+struct dir_open_adapter {
+	unsigned char command;
+	char reserved[7];
+	__u16 open_options;
+	unsigned char node_address[6];
+	unsigned char group_address[4];
+	unsigned char funct_address[4];
+	__u16 num_rcv_buf;
+	__u16 rcv_buf_len;
+	__u16 dhb_length;
+	unsigned char num_dhb;
+	char reserved2;
+	unsigned char dlc_max_sap;
+	unsigned char dlc_max_sta;
+	unsigned char dlc_max_gsap;
+	unsigned char dlc_max_gmem;
+	unsigned char dlc_t1_tick_1;
+	unsigned char dlc_t2_tick_1;
+	unsigned char dlc_ti_tick_1;
+	unsigned char dlc_t1_tick_2;
+	unsigned char dlc_t2_tick_2;
+	unsigned char dlc_ti_tick_2;
+	unsigned char product_id[18];
+};
+
+struct dlc_open_sap {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2;
+	__u16 station_id;
+	unsigned char timer_t1;
+	unsigned char timer_t2;
+	unsigned char timer_ti;
+	unsigned char maxout;
+	unsigned char maxin;
+	unsigned char maxout_incr;
+	unsigned char max_retry_count;
+	unsigned char gsap_max_mem;
+	__u16 max_i_field;
+	unsigned char sap_value;
+	unsigned char sap_options;
+	unsigned char station_count;
+	unsigned char sap_gsap_mem;
+	unsigned char gsap[0];
+};
+
+struct srb_xmit {
+	unsigned char command;
+	unsigned char cmd_corr;
+	unsigned char ret_code;
+	unsigned char reserved1;
+	__u16 station_id;
+};
+
+struct arb_rec_req {
+	unsigned char command;
+	unsigned char reserved1[3];
+	__u16 station_id;
+	__u16 rec_buf_addr;
+	unsigned char lan_hdr_len;
+	unsigned char dlc_hdr_len;
+	__u16 frame_len;
+	unsigned char msg_type;
+};
+
+struct asb_rec {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2;
+	__u16 station_id;
+	__u16 rec_buf_addr;
+};
+
+struct rec_buf {
+  	unsigned char reserved1[2];
+	__u16 buf_ptr;
+	unsigned char reserved2;
+	unsigned char receive_fs;
+	__u16 buf_len;
+	unsigned char data[0];
+};
+
+struct srb_set_funct_addr {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2[3];
+	unsigned char funct_address[4];
+};
+
+#endif
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
new file mode 100644
index 000000000000..f0b571f1060b
--- /dev/null
+++ b/include/linux/icmp.h
@@ -0,0 +1,96 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP protocol.
+ *
+ * Version:	@(#)icmp.h	1.0.3	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_ICMP_H
+#define	_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
+#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
+#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
+#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
+#define ICMP_ECHO		8	/* Echo Request			*/
+#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
+#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
+#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
+#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
+#define ICMP_INFO_REQUEST	15	/* Information Request		*/
+#define ICMP_INFO_REPLY		16	/* Information Reply		*/
+#define ICMP_ADDRESS		17	/* Address Mask Request		*/
+#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
+#define NR_ICMP_TYPES		18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
+#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
+#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
+#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
+#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
+#define ICMP_SR_FAILED		5	/* Source Route failed		*/
+#define ICMP_NET_UNKNOWN	6
+#define ICMP_HOST_UNKNOWN	7
+#define ICMP_HOST_ISOLATED	8
+#define ICMP_NET_ANO		9
+#define ICMP_HOST_ANO		10
+#define ICMP_NET_UNR_TOS	11
+#define ICMP_HOST_UNR_TOS	12
+#define ICMP_PKT_FILTERED	13	/* Packet filtered */
+#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
+#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
+#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET		0	/* Redirect Net			*/
+#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
+#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
+#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
+#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
+
+
+struct icmphdr {
+  __u8		type;
+  __u8		code;
+  __u16		checksum;
+  union {
+	struct {
+		__u16	id;
+		__u16	sequence;
+	} echo;
+	__u32	gateway;
+	struct {
+		__u16	__unused;
+		__u16	mtu;
+	} frag;
+  } un;
+};
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER			1
+
+struct icmp_filter {
+	__u32		data;
+};
+
+
+#endif	/* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
new file mode 100644
index 000000000000..0cf6c8b12caf
--- /dev/null
+++ b/include/linux/icmpv6.h
@@ -0,0 +1,171 @@
+#ifndef _LINUX_ICMPV6_H
+#define _LINUX_ICMPV6_H
+
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+	__u8		icmp6_type;
+	__u8		icmp6_code;
+	__u16		icmp6_cksum;
+
+
+	union {
+		__u32			un_data32[1];
+		__u16			un_data16[2];
+		__u8			un_data8[4];
+
+		struct icmpv6_echo {
+			__u16		identifier;
+			__u16		sequence;
+		} u_echo;
+
+                struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+                        __u32		reserved:5,
+                        		override:1,
+                        		solicited:1,
+                        		router:1,
+					reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+                        __u32		router:1,
+					solicited:1,
+                        		override:1,
+                        		reserved:29;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif						
+                } u_nd_advt;
+
+                struct icmpv6_nd_ra {
+			__u8		hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+			__u8		reserved:6,
+					other:1,
+					managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+			__u8		managed:1,
+					other:1,
+					reserved:6;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+			__u16		rt_lifetime;
+                } u_nd_ra;
+
+	} icmp6_dataun;
+
+#define icmp6_identifier	icmp6_dataun.u_echo.identifier
+#define icmp6_sequence		icmp6_dataun.u_echo.sequence
+#define icmp6_pointer		icmp6_dataun.un_data32[0]
+#define icmp6_mtu		icmp6_dataun.un_data32[0]
+#define icmp6_unused		icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
+#define icmp6_router		icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override		icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+};
+
+
+#define ICMPV6_DEST_UNREACH		1
+#define ICMPV6_PKT_TOOBIG		2
+#define ICMPV6_TIME_EXCEED		3
+#define ICMPV6_PARAMPROB		4
+
+#define ICMPV6_INFOMSG_MASK		0x80
+
+#define ICMPV6_ECHO_REQUEST		128
+#define ICMPV6_ECHO_REPLY		129
+#define ICMPV6_MGM_QUERY		130
+#define ICMPV6_MGM_REPORT       	131
+#define ICMPV6_MGM_REDUCTION    	132
+
+#define ICMPV6_NI_QUERY			139
+#define ICMPV6_NI_REPLY			140
+
+#define ICMPV6_MLD2_REPORT		143
+
+#define ICMPV6_DHAAD_REQUEST		144
+#define ICMPV6_DHAAD_REPLY		145
+#define ICMPV6_MOBILE_PREFIX_SOL	146
+#define ICMPV6_MOBILE_PREFIX_ADV	147
+
+/*
+ *	Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE			0
+#define ICMPV6_ADM_PROHIBITED		1
+#define ICMPV6_NOT_NEIGHBOUR		2
+#define ICMPV6_ADDR_UNREACH		3
+#define ICMPV6_PORT_UNREACH		4
+
+/*
+ *	Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT		0
+#define ICMPV6_EXC_FRAGTIME		1
+
+/*
+ *	Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD		0
+#define ICMPV6_UNK_NEXTHDR		1
+#define ICMPV6_UNK_OPTION		2
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER			1
+
+/*
+ *	ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK		1
+#define ICMPV6_FILTER_PASS		2
+#define ICMPV6_FILTER_BLOCKOTHERS	3
+#define ICMPV6_FILTER_PASSONLY		4
+
+struct icmp6_filter {
+	__u32		data[8];
+};
+
+/*
+ *	Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE	1
+#define MLD2_MODE_IS_EXCLUDE	2
+#define MLD2_CHANGE_TO_INCLUDE	3
+#define MLD2_CHANGE_TO_EXCLUDE	4
+#define MLD2_ALLOW_NEW_SOURCES	5
+#define MLD2_BLOCK_OLD_SOURCES	6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+
+
+extern void				icmpv6_send(struct sk_buff *skb,
+						    int type, int code,
+						    __u32 info, 
+						    struct net_device *dev);
+
+extern int				icmpv6_init(struct net_proto_family *ops);
+extern int				icmpv6_err_convert(int type, int code,
+							   int *err);
+extern void				icmpv6_cleanup(void);
+extern void				icmpv6_param_prob(struct sk_buff *skb,
+							  int code, int pos);
+#endif
+
+#endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
new file mode 100644
index 000000000000..9cfc0999becb
--- /dev/null
+++ b/include/linux/ide.h
@@ -0,0 +1,1516 @@
+#ifndef _IDE_H
+#define _IDE_H
+/*
+ *  linux/include/linux/ide.h
+ *
+ *  Copyright (C) 1994-2002  Linus Torvalds & authors
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/hdsmart.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/bio.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/semaphore.h>
+
+/*
+ * This is the multiple IDE interface driver, as evolved from hd.c.
+ * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
+ * There can be up to two drives per interface, as per the ATA-2 spec.
+ *
+ * Primary i/f:    ide0: major=3;  (hda)         minor=0; (hdb)         minor=64
+ * Secondary i/f:  ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
+ * Tertiary i/f:   ide2: major=33; (hde)         minor=0; (hdf)         minor=64
+ * Quaternary i/f: ide3: major=34; (hdg)         minor=0; (hdh)         minor=64
+ */
+
+/******************************************************************************
+ * IDE driver configuration options (play with these as desired):
+ *
+ * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
+ */
+#define INITIAL_MULT_COUNT	0	/* off=0; on=2,4,8,16,32, etc.. */
+
+#ifndef SUPPORT_SLOW_DATA_PORTS		/* 1 to support slow data ports */
+#define SUPPORT_SLOW_DATA_PORTS	1	/* 0 to reduce kernel size */
+#endif
+#ifndef SUPPORT_VLB_SYNC		/* 1 to support weird 32-bit chips */
+#define SUPPORT_VLB_SYNC	1	/* 0 to reduce kernel size */
+#endif
+#ifndef OK_TO_RESET_CONTROLLER		/* 1 needed for good error recovery */
+#define OK_TO_RESET_CONTROLLER	1	/* 0 for use with AH2372A/B interface */
+#endif
+
+#ifndef DISABLE_IRQ_NOSYNC
+#define DISABLE_IRQ_NOSYNC	0
+#endif
+
+/*
+ * Used to indicate "no IRQ", should be a value that cannot be an IRQ
+ * number.
+ */
+ 
+#define IDE_NO_IRQ		(-1)
+
+/*
+ *  "No user-serviceable parts" beyond this point  :)
+ *****************************************************************************/
+
+typedef unsigned char	byte;	/* used everywhere */
+
+/*
+ * Probably not wise to fiddle with these
+ */
+#define ERROR_MAX	8	/* Max read/write errors per sector */
+#define ERROR_RESET	3	/* Reset controller every 4th retry */
+#define ERROR_RECAL	1	/* Recalibrate every 2nd retry */
+
+/*
+ * Tune flags
+ */
+#define IDE_TUNE_NOAUTO		2
+#define IDE_TUNE_AUTO		1
+#define IDE_TUNE_DEFAULT	0
+
+/*
+ * state flags
+ */
+
+#define DMA_PIO_RETRY	1	/* retrying in PIO */
+
+#define HWIF(drive)		((ide_hwif_t *)((drive)->hwif))
+#define HWGROUP(drive)		((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
+
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define IDE_NR_PORTS		(10)
+
+#define IDE_DATA_OFFSET		(0)
+#define IDE_ERROR_OFFSET	(1)
+#define IDE_NSECTOR_OFFSET	(2)
+#define IDE_SECTOR_OFFSET	(3)
+#define IDE_LCYL_OFFSET		(4)
+#define IDE_HCYL_OFFSET		(5)
+#define IDE_SELECT_OFFSET	(6)
+#define IDE_STATUS_OFFSET	(7)
+#define IDE_CONTROL_OFFSET	(8)
+#define IDE_IRQ_OFFSET		(9)
+
+#define IDE_FEATURE_OFFSET	IDE_ERROR_OFFSET
+#define IDE_COMMAND_OFFSET	IDE_STATUS_OFFSET
+
+#define IDE_CONTROL_OFFSET_HOB	(7)
+
+#define IDE_DATA_REG		(HWIF(drive)->io_ports[IDE_DATA_OFFSET])
+#define IDE_ERROR_REG		(HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
+#define IDE_NSECTOR_REG		(HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
+#define IDE_SECTOR_REG		(HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
+#define IDE_LCYL_REG		(HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
+#define IDE_HCYL_REG		(HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
+#define IDE_SELECT_REG		(HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
+#define IDE_STATUS_REG		(HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
+#define IDE_CONTROL_REG		(HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
+#define IDE_IRQ_REG		(HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
+
+#define IDE_FEATURE_REG		IDE_ERROR_REG
+#define IDE_COMMAND_REG		IDE_STATUS_REG
+#define IDE_ALTSTATUS_REG	IDE_CONTROL_REG
+#define IDE_IREASON_REG		IDE_NSECTOR_REG
+#define IDE_BCOUNTL_REG		IDE_LCYL_REG
+#define IDE_BCOUNTH_REG		IDE_HCYL_REG
+
+#define OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good))
+#define BAD_R_STAT		(BUSY_STAT   | ERR_STAT)
+#define BAD_W_STAT		(BAD_R_STAT  | WRERR_STAT)
+#define BAD_STAT		(BAD_R_STAT  | DRQ_STAT)
+#define DRIVE_READY		(READY_STAT  | SEEK_STAT)
+#define DATA_READY		(DRQ_STAT)
+
+#define BAD_CRC			(ABRT_ERR    | ICRC_ERR)
+
+#define SATA_NR_PORTS		(3)	/* 16 possible ?? */
+
+#define SATA_STATUS_OFFSET	(0)
+#define SATA_STATUS_REG		(HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
+#define SATA_ERROR_OFFSET	(1)
+#define SATA_ERROR_REG		(HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
+#define SATA_CONTROL_OFFSET	(2)
+#define SATA_CONTROL_REG	(HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
+
+#define SATA_MISC_OFFSET	(0)
+#define SATA_MISC_REG		(HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
+#define SATA_PHY_OFFSET		(1)
+#define SATA_PHY_REG		(HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
+#define SATA_IEN_OFFSET		(2)
+#define SATA_IEN_REG		(HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
+
+/*
+ * Our Physical Region Descriptor (PRD) table should be large enough
+ * to handle the biggest I/O request we are likely to see.  Since requests
+ * can have no more than 256 sectors, and since the typical blocksize is
+ * two or more sectors, we could get by with a limit of 128 entries here for
+ * the usual worst case.  Most requests seem to include some contiguous blocks,
+ * further reducing the number of table entries required.
+ *
+ * The driver reverts to PIO mode for individual requests that exceed
+ * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
+ * 100% of all crazy scenarios here is not necessary.
+ *
+ * As it turns out though, we must allocate a full 4KB page for this,
+ * so the two PRD tables (ide0 & ide1) will each get half of that,
+ * allowing each to have about 256 entries (8 bytes each) from this.
+ */
+#define PRD_BYTES       8
+#define PRD_ENTRIES	256
+
+/*
+ * Some more useful definitions
+ */
+#define PARTN_BITS	6	/* number of minor dev bits for partitions */
+#define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */
+#define SECTOR_SIZE	512
+#define SECTOR_WORDS	(SECTOR_SIZE / 4)	/* number of 32bit words per sector */
+#define IDE_LARGE_SEEK(b1,b2,t)	(((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
+
+/*
+ * Timeouts for various operations:
+ */
+#define WAIT_DRQ	(HZ/10)		/* 100msec - spec allows up to 20ms */
+#define WAIT_READY	(5*HZ)		/* 5sec - some laptops are very slow */
+#define WAIT_PIDENTIFY	(10*HZ)	/* 10sec  - should be less than 3ms (?), if all ATAPI CD is closed at boot */
+#define WAIT_WORSTCASE	(30*HZ)	/* 30sec  - worst case when spinning up */
+#define WAIT_CMD	(10*HZ)	/* 10sec  - maximum wait for an IRQ to happen */
+#define WAIT_MIN_SLEEP	(2*HZ/100)	/* 20msec - minimum sleep time */
+
+#define HOST(hwif,chipset)					\
+{								\
+	return ((hwif)->chipset == chipset) ? 1 : 0;		\
+}
+
+/*
+ * Check for an interrupt and acknowledge the interrupt status
+ */
+struct hwif_s;
+typedef int (ide_ack_intr_t)(struct hwif_s *);
+
+#ifndef NO_DMA
+#define NO_DMA  255
+#endif
+
+/*
+ * hwif_chipset_t is used to keep track of the specific hardware
+ * chipset used by each IDE interface, if known.
+ */
+typedef enum {	ide_unknown,	ide_generic,	ide_pci,
+		ide_cmd640,	ide_dtc2278,	ide_ali14xx,
+		ide_qd65xx,	ide_umc8672,	ide_ht6560b,
+		ide_rz1000,	ide_trm290,
+		ide_cmd646,	ide_cy82c693,	ide_4drives,
+		ide_pmac,	ide_etrax100,	ide_acorn,
+		ide_forced
+} hwif_chipset_t;
+
+/*
+ * Structure to hold all information about the location of this port
+ */
+typedef struct hw_regs_s {
+	unsigned long	io_ports[IDE_NR_PORTS];	/* task file registers */
+	int		irq;			/* our irq number */
+	int		dma;			/* our dma entry */
+	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
+	hwif_chipset_t  chipset;
+} hw_regs_t;
+
+/*
+ * Register new hardware with ide
+ */
+int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
+int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
+
+/*
+ * Set up hw_regs_t structure before calling ide_register_hw (optional)
+ */
+void ide_setup_ports(	hw_regs_t *hw,
+			unsigned long base,
+			int *offsets,
+			unsigned long ctrl,
+			unsigned long intr,
+			ide_ack_intr_t *ack_intr,
+#if 0
+			ide_io_ops_t *iops,
+#endif
+			int irq);
+
+static inline void ide_std_init_ports(hw_regs_t *hw,
+				      unsigned long io_addr,
+				      unsigned long ctl_addr)
+{
+	unsigned int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
+		hw->io_ports[i] = io_addr++;
+
+	hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
+}
+
+#include <asm/ide.h>
+
+/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
+#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
+# define ide_default_io_base(index)	(0)
+# define ide_default_irq(base)		(0)
+# define ide_init_default_irq(base)	(0)
+#endif
+
+/*
+ * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
+ * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
+ */
+#ifdef IDE_ARCH_OBSOLETE_INIT
+static inline void ide_init_hwif_ports(hw_regs_t *hw,
+				       unsigned long io_addr,
+				       unsigned long ctl_addr,
+				       int *irq)
+{
+	if (!ctl_addr)
+		ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
+	else
+		ide_std_init_ports(hw, io_addr, ctl_addr);
+
+	if (irq)
+		*irq = 0;
+
+	hw->io_ports[IDE_IRQ_OFFSET] = 0;
+
+#ifdef CONFIG_PPC32
+	if (ppc_ide_md.ide_init_hwif)
+		ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
+#endif
+}
+#else
+static inline void ide_init_hwif_ports(hw_regs_t *hw,
+				       unsigned long io_addr,
+				       unsigned long ctl_addr,
+				       int *irq)
+{
+	if (io_addr || ctl_addr)
+		printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
+}
+#endif /* IDE_ARCH_OBSOLETE_INIT */
+
+/* Currently only m68k, apus and m8xx need it */
+#ifndef IDE_ARCH_ACK_INTR
+# define ide_ack_intr(hwif) (1)
+#endif
+
+/* Currently only Atari needs it */
+#ifndef IDE_ARCH_LOCK
+# define ide_release_lock()			do {} while (0)
+# define ide_get_lock(hdlr, data)		do {} while (0)
+#endif /* IDE_ARCH_LOCK */
+
+/*
+ * Now for the data we need to maintain per-drive:  ide_drive_t
+ */
+
+#define ide_scsi	0x21
+#define ide_disk	0x20
+#define ide_optical	0x7
+#define ide_cdrom	0x5
+#define ide_tape	0x1
+#define ide_floppy	0x0
+
+/*
+ * Special Driver Flags
+ *
+ * set_geometry	: respecify drive geometry
+ * recalibrate	: seek to cyl 0
+ * set_multmode	: set multmode count
+ * set_tune	: tune interface for drive
+ * serviced	: service command
+ * reserved	: unused
+ */
+typedef union {
+	unsigned all			: 8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned set_geometry	: 1;
+		unsigned recalibrate	: 1;
+		unsigned set_multmode	: 1;
+		unsigned set_tune	: 1;
+		unsigned serviced	: 1;
+		unsigned reserved	: 3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned reserved	: 3;
+		unsigned serviced	: 1;
+		unsigned set_tune	: 1;
+		unsigned set_multmode	: 1;
+		unsigned recalibrate	: 1;
+		unsigned set_geometry	: 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} special_t;
+
+/*
+ * ATA DATA Register Special.
+ * ATA NSECTOR Count Register().
+ * ATAPI Byte Count Register.
+ * Channel index ordering pairs.
+ */
+typedef union {
+	unsigned all			:16;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned low		:8;	/* LSB */
+		unsigned high		:8;	/* MSB */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned high		:8;	/* MSB */
+		unsigned low		:8;	/* LSB */
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
+
+/*
+ * ATA-IDE Error Register
+ *
+ * mark		: Bad address mark
+ * tzero	: Couldn't find track 0
+ * abrt		: Aborted Command
+ * mcr		: Media Change Request
+ * id		: ID field not found
+ * mce		: Media Change Event
+ * ecc		: Uncorrectable ECC error
+ * bdd		: dual meaing
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned mark		:1;
+		unsigned tzero		:1;
+		unsigned abrt		:1;
+		unsigned mcr		:1;
+		unsigned id		:1;
+		unsigned mce		:1;
+		unsigned ecc		:1;
+		unsigned bdd		:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned bdd		:1;
+		unsigned ecc		:1;
+		unsigned mce		:1;
+		unsigned id		:1;
+		unsigned mcr		:1;
+		unsigned abrt		:1;
+		unsigned tzero		:1;
+		unsigned mark		:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} ata_error_t;
+
+/*
+ * ATA-IDE Select Register, aka Device-Head
+ *
+ * head		: always zeros here
+ * unit		: drive select number: 0/1
+ * bit5		: always 1
+ * lba		: using LBA instead of CHS
+ * bit7		: always 1
+ */
+typedef union {
+	unsigned all			: 8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned head		: 4;
+		unsigned unit		: 1;
+		unsigned bit5		: 1;
+		unsigned lba		: 1;
+		unsigned bit7		: 1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned bit7		: 1;
+		unsigned lba		: 1;
+		unsigned bit5		: 1;
+		unsigned unit		: 1;
+		unsigned head		: 4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} select_t, ata_select_t;
+
+/*
+ * The ATA-IDE Status Register.
+ * The ATAPI Status Register.
+ *
+ * check	: Error occurred
+ * idx		: Index Error
+ * corr		: Correctable error occurred
+ * drq		: Data is request by the device
+ * dsc		: Disk Seek Complete			: ata
+ *		: Media access command finished		: atapi
+ * df		: Device Fault				: ata
+ *		: Reserved				: atapi
+ * drdy		: Ready, Command Mode Capable		: ata
+ *		: Ignored for ATAPI commands		: atapi
+ * bsy		: Disk is Busy
+ *		: The device has access to the command block
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned check		:1;
+		unsigned idx		:1;
+		unsigned corr		:1;
+		unsigned drq		:1;
+		unsigned dsc		:1;
+		unsigned df		:1;
+		unsigned drdy		:1;
+		unsigned bsy		:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned bsy		:1;
+		unsigned drdy		:1;
+		unsigned df		:1;
+		unsigned dsc		:1;
+		unsigned drq		:1;
+		unsigned corr           :1;
+		unsigned idx		:1;
+		unsigned check		:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} ata_status_t, atapi_status_t;
+
+/*
+ * ATA-IDE Control Register
+ *
+ * bit0		: Should be set to zero
+ * nIEN		: device INTRQ to host
+ * SRST		: host soft reset bit
+ * bit3		: ATA-2 thingy, Should be set to 1
+ * reserved456	: Reserved
+ * HOB		: 48-bit address ordering, High Ordered Bit
+ */
+typedef union {
+	unsigned all			: 8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned bit0		: 1;
+		unsigned nIEN		: 1;
+		unsigned SRST		: 1;
+		unsigned bit3		: 1;
+		unsigned reserved456	: 3;
+		unsigned HOB		: 1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned HOB		: 1;
+		unsigned reserved456	: 3;
+		unsigned bit3		: 1;
+		unsigned SRST		: 1;
+		unsigned nIEN		: 1;
+		unsigned bit0		: 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} ata_control_t;
+
+/*
+ * ATAPI Feature Register
+ *
+ * dma		: Using DMA or PIO
+ * reserved321	: Reserved
+ * reserved654	: Reserved (Tag Type)
+ * reserved7	: Reserved
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned dma		:1;
+		unsigned reserved321	:3;
+		unsigned reserved654	:3;
+		unsigned reserved7	:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned reserved7	:1;
+		unsigned reserved654	:3;
+		unsigned reserved321	:3;
+		unsigned dma		:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} atapi_feature_t;
+
+/*
+ * ATAPI Interrupt Reason Register.
+ *
+ * cod		: Information transferred is command (1) or data (0)
+ * io		: The device requests us to read (1) or write (0)
+ * reserved	: Reserved
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned cod		:1;
+		unsigned io		:1;
+		unsigned reserved	:6;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned reserved	:6;
+		unsigned io		:1;
+		unsigned cod		:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} atapi_ireason_t;
+
+/*
+ * The ATAPI error register.
+ *
+ * ili		: Illegal Length Indication
+ * eom		: End Of Media Detected
+ * abrt		: Aborted command - As defined by ATA
+ * mcr		: Media Change Requested - As defined by ATA
+ * sense_key	: Sense key of the last failed packet command
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned ili		:1;
+		unsigned eom		:1;
+		unsigned abrt		:1;
+		unsigned mcr		:1;
+		unsigned sense_key	:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned sense_key	:4;
+		unsigned mcr		:1;
+		unsigned abrt		:1;
+		unsigned eom		:1;
+		unsigned ili		:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} atapi_error_t;
+
+/*
+ * ATAPI floppy Drive Select Register
+ *
+ * sam_lun	: Logical unit number
+ * reserved3	: Reserved
+ * drv		: The responding drive will be drive 0 (0) or drive 1 (1)
+ * one5		: Should be set to 1
+ * reserved6	: Reserved
+ * one7		: Should be set to 1
+ */
+typedef union {
+	unsigned all			:8;
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned sam_lun	:3;
+		unsigned reserved3	:1;
+		unsigned drv		:1;
+		unsigned one5		:1;
+		unsigned reserved6	:1;
+		unsigned one7		:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned one7		:1;
+		unsigned reserved6	:1;
+		unsigned one5		:1;
+		unsigned drv		:1;
+		unsigned reserved3	:1;
+		unsigned sam_lun	:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	} b;
+} atapi_select_t;
+
+/*
+ * Status returned from various ide_ functions
+ */
+typedef enum {
+	ide_stopped,	/* no drive operation was started */
+	ide_started,	/* a drive operation was started, handler was set */
+} ide_startstop_t;
+
+struct ide_driver_s;
+struct ide_settings_s;
+
+typedef struct ide_drive_s {
+	char		name[4];	/* drive name, such as "hda" */
+        char            driver_req[10];	/* requests specific driver */
+
+	request_queue_t		*queue;	/* request queue */
+
+	struct request		*rq;	/* current request */
+	struct ide_drive_s 	*next;	/* circular list of hwgroup drives */
+	struct ide_driver_s	*driver;/* (ide_driver_t *) */
+	void		*driver_data;	/* extra driver data */
+	struct hd_driveid	*id;	/* drive model identification info */
+	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
+	struct ide_settings_s *settings;/* /proc/ide/ drive settings */
+	char		devfs_name[64];	/* devfs crap */
+
+	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */
+
+	unsigned long sleep;		/* sleep until this time */
+	unsigned long service_start;	/* time we started last request */
+	unsigned long service_time;	/* service time of last request */
+	unsigned long timeout;		/* max time to wait for irq */
+
+	special_t	special;	/* special action flags */
+	select_t	select;		/* basic drive/head select reg value */
+
+	u8	keep_settings;		/* restore settings after drive reset */
+	u8	autodma;		/* device can safely use dma on host */
+	u8	using_dma;		/* disk is using dma for read/write */
+	u8	retry_pio;		/* retrying dma capable host in pio */
+	u8	state;			/* retry state */
+	u8	waiting_for_dma;	/* dma currently in progress */
+	u8	unmask;			/* okay to unmask other irqs */
+	u8	bswap;			/* byte swap data */
+	u8	dsc_overlap;		/* DSC overlap */
+	u8	nice1;			/* give potential excess bandwidth */
+
+	unsigned present	: 1;	/* drive is physically present */
+	unsigned dead		: 1;	/* device ejected hint */
+	unsigned id_read	: 1;	/* 1=id read from disk 0 = synthetic */
+	unsigned noprobe 	: 1;	/* from:  hdx=noprobe */
+	unsigned removable	: 1;	/* 1 if need to do check_media_change */
+	unsigned attach		: 1;	/* needed for removable devices */
+	unsigned is_flash	: 1;	/* 1 if probed as flash */
+	unsigned forced_geom	: 1;	/* 1 if hdx=c,h,s was given at boot */
+	unsigned no_unmask	: 1;	/* disallow setting unmask bit */
+	unsigned no_io_32bit	: 1;	/* disallow enabling 32bit I/O */
+	unsigned atapi_overlap	: 1;	/* ATAPI overlap (not supported) */
+	unsigned nice0		: 1;	/* give obvious excess bandwidth */
+	unsigned nice2		: 1;	/* give a share in our own bandwidth */
+	unsigned doorlocking	: 1;	/* for removable only: door lock/unlock works */
+	unsigned autotune	: 2;	/* 0=default, 1=autotune, 2=noautotune */
+	unsigned remap_0_to_1	: 1;	/* 0=noremap, 1=remap 0->1 (for EZDrive) */
+	unsigned blocked        : 1;	/* 1=powermanagment told us not to do anything, so sleep nicely */
+	unsigned vdma		: 1;	/* 1=doing PIO over DMA 0=doing normal DMA */
+	unsigned addressing;		/*      : 3;
+					 *  0=28-bit
+					 *  1=48-bit
+					 *  2=48-bit doing 28-bit
+					 *  3=64-bit
+					 */
+	unsigned scsi		: 1;	/* 0=default, 1=ide-scsi emulation */
+	unsigned sleeping	: 1;	/* 1=sleeping & sleep field valid */
+	unsigned post_reset	: 1;
+
+        u8	quirk_list;	/* considered quirky, set for a specific host */
+        u8	init_speed;	/* transfer rate set at boot */
+        u8	pio_speed;      /* unused by core, used by some drivers for fallback from DMA */
+        u8	current_speed;	/* current transfer rate set */
+        u8	dn;		/* now wide spread use */
+        u8	wcache;		/* status of write cache */
+	u8	acoustic;	/* acoustic management */
+	u8	media;		/* disk, cdrom, tape, floppy, ... */
+	u8	ctl;		/* "normal" value for IDE_CONTROL_REG */
+	u8	ready_stat;	/* min status value for drive ready */
+	u8	mult_count;	/* current multiple sector setting */
+	u8	mult_req;	/* requested multiple sector setting */
+	u8	tune_req;	/* requested drive tuning setting */
+	u8	io_32bit;	/* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+	u8	bad_wstat;	/* used for ignoring WRERR_STAT */
+	u8	nowerr;		/* used for ignoring WRERR_STAT */
+	u8	sect0;		/* offset of first sector for DM6:DDO */
+	u8	head;		/* "real" number of heads */
+	u8	sect;		/* "real" sectors per track */
+	u8	bios_head;	/* BIOS/fdisk/LILO number of heads */
+	u8	bios_sect;	/* BIOS/fdisk/LILO sectors per track */
+
+	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
+	unsigned int	cyl;		/* "real" number of cyls */
+	unsigned int	drive_data;	/* use by tuneproc/selectproc */
+	unsigned int	usage;		/* current "open()" count for drive */
+	unsigned int	failures;	/* current failure count */
+	unsigned int	max_failures;	/* maximum allowed failure count */
+
+	u64		capacity64;	/* total number of sectors */
+
+	int		lun;		/* logical unit */
+	int		crc_count;	/* crc counter to reduce drive speed */
+	struct list_head list;
+	struct device	gendev;
+	struct semaphore gendev_rel_sem;	/* to deal with device release() */
+} ide_drive_t;
+
+#define IDE_CHIPSET_PCI_MASK	\
+    ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
+#define IDE_CHIPSET_IS_PCI(c)	((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
+
+struct ide_pci_device_s;
+
+typedef struct hwif_s {
+	struct hwif_s *next;		/* for linked-list in ide_hwgroup_t */
+	struct hwif_s *mate;		/* other hwif from same PCI chip */
+	struct hwgroup_s *hwgroup;	/* actually (ide_hwgroup_t *) */
+	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
+
+	char name[6];			/* name of interface, eg. "ide0" */
+
+		/* task file registers for pata and sata */
+	unsigned long	io_ports[IDE_NR_PORTS];
+	unsigned long	sata_scr[SATA_NR_PORTS];
+	unsigned long	sata_misc[SATA_NR_PORTS];
+
+	hw_regs_t	hw;		/* Hardware info */
+	ide_drive_t	drives[MAX_DRIVES];	/* drive info */
+
+	u8 major;	/* our major number */
+	u8 index;	/* 0 for ide0; 1 for ide1; ... */
+	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
+	u8 straight8;	/* Alan's straight 8 check */
+	u8 bus_state;	/* power state of the IDE bus */
+
+	u8 atapi_dma;	/* host supports atapi_dma */
+	u8 ultra_mask;
+	u8 mwdma_mask;
+	u8 swdma_mask;
+
+	hwif_chipset_t chipset;	/* sub-module for tuning.. */
+
+	struct pci_dev  *pci_dev;	/* for pci chipsets */
+	struct ide_pci_device_s	*cds;	/* chipset device struct */
+
+	void (*rw_disk)(ide_drive_t *, struct request *);
+
+#if 0
+	ide_hwif_ops_t	*hwifops;
+#else
+	/* routine to tune PIO mode for drives */
+	void	(*tuneproc)(ide_drive_t *, u8);
+	/* routine to retune DMA modes for drives */
+	int	(*speedproc)(ide_drive_t *, u8);
+	/* tweaks hardware to select drive */
+	void	(*selectproc)(ide_drive_t *);
+	/* chipset polling based on hba specifics */
+	int	(*reset_poll)(ide_drive_t *);
+	/* chipset specific changes to default for device-hba resets */
+	void	(*pre_reset)(ide_drive_t *);
+	/* routine to reset controller after a disk reset */
+	void	(*resetproc)(ide_drive_t *);
+	/* special interrupt handling for shared pci interrupts */
+	void	(*intrproc)(ide_drive_t *);
+	/* special host masking for drive selection */
+	void	(*maskproc)(ide_drive_t *, int);
+	/* check host's drive quirk list */
+	int	(*quirkproc)(ide_drive_t *);
+	/* driver soft-power interface */
+	int	(*busproc)(ide_drive_t *, int);
+//	/* host rate limiter */
+//	u8	(*ratemask)(ide_drive_t *);
+//	/* device rate limiter */
+//	u8	(*ratefilter)(ide_drive_t *, u8);
+#endif
+
+	void (*ata_input_data)(ide_drive_t *, void *, u32);
+	void (*ata_output_data)(ide_drive_t *, void *, u32);
+
+	void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
+	void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
+
+	int (*dma_setup)(ide_drive_t *);
+	void (*dma_exec_cmd)(ide_drive_t *, u8);
+	void (*dma_start)(ide_drive_t *);
+	int (*ide_dma_end)(ide_drive_t *drive);
+	int (*ide_dma_check)(ide_drive_t *drive);
+	int (*ide_dma_on)(ide_drive_t *drive);
+	int (*ide_dma_off_quietly)(ide_drive_t *drive);
+	int (*ide_dma_test_irq)(ide_drive_t *drive);
+	int (*ide_dma_host_on)(ide_drive_t *drive);
+	int (*ide_dma_host_off)(ide_drive_t *drive);
+	int (*ide_dma_lostirq)(ide_drive_t *drive);
+	int (*ide_dma_timeout)(ide_drive_t *drive);
+
+	void (*OUTB)(u8 addr, unsigned long port);
+	void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
+	void (*OUTW)(u16 addr, unsigned long port);
+	void (*OUTL)(u32 addr, unsigned long port);
+	void (*OUTSW)(unsigned long port, void *addr, u32 count);
+	void (*OUTSL)(unsigned long port, void *addr, u32 count);
+
+	u8  (*INB)(unsigned long port);
+	u16 (*INW)(unsigned long port);
+	u32 (*INL)(unsigned long port);
+	void (*INSW)(unsigned long port, void *addr, u32 count);
+	void (*INSL)(unsigned long port, void *addr, u32 count);
+
+	/* dma physical region descriptor table (cpu view) */
+	unsigned int	*dmatable_cpu;
+	/* dma physical region descriptor table (dma view) */
+	dma_addr_t	dmatable_dma;
+	/* Scatter-gather list used to build the above */
+	struct scatterlist *sg_table;
+	int sg_max_nents;		/* Maximum number of entries in it */
+	int sg_nents;			/* Current number of entries in it */
+	int sg_dma_direction;		/* dma transfer direction */
+
+	/* data phase of the active command (currently only valid for PIO/DMA) */
+	int		data_phase;
+
+	unsigned int nsect;
+	unsigned int nleft;
+	unsigned int cursg;
+	unsigned int cursg_ofs;
+
+	int		mmio;		/* hosts iomio (0) or custom (2) select */
+	int		rqsize;		/* max sectors per request */
+	int		irq;		/* our irq number */
+
+	unsigned long	dma_master;	/* reference base addr dmabase */
+	unsigned long	dma_base;	/* base addr for dma ports */
+	unsigned long	dma_command;	/* dma command register */
+	unsigned long	dma_vendor1;	/* dma vendor 1 register */
+	unsigned long	dma_status;	/* dma status register */
+	unsigned long	dma_vendor3;	/* dma vendor 3 register */
+	unsigned long	dma_prdtable;	/* actual prd table address */
+	unsigned long	dma_base2;	/* extended base addr for dma ports */
+
+	unsigned	dma_extra;	/* extra addr for dma ports */
+	unsigned long	config_data;	/* for use by chipset-specific code */
+	unsigned long	select_data;	/* for use by chipset-specific code */
+
+	unsigned	noprobe    : 1;	/* don't probe for this interface */
+	unsigned	present    : 1;	/* this interface exists */
+	unsigned	hold       : 1; /* this interface is always present */
+	unsigned	serialized : 1;	/* serialized all channel operation */
+	unsigned	sharing_irq: 1;	/* 1 = sharing irq with another hwif */
+	unsigned	reset      : 1;	/* reset after probe */
+	unsigned	autodma    : 1;	/* auto-attempt using DMA at boot */
+	unsigned	udma_four  : 1;	/* 1=ATA-66 capable, 0=default */
+	unsigned	no_lba48   : 1; /* 1 = cannot do LBA48 */
+	unsigned	no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
+	unsigned	no_dsc     : 1;	/* 0 default, 1 dsc_overlap disabled */
+	unsigned	auto_poll  : 1; /* supports nop auto-poll */
+	unsigned	sg_mapped  : 1;	/* sg_table and sg_nents are ready */
+
+	struct device	gendev;
+	struct semaphore gendev_rel_sem; /* To deal with device release() */
+
+	void		*hwif_data;	/* extra hwif data */
+
+	unsigned dma;
+
+	void (*led_act)(void *data, int rw);
+} ide_hwif_t;
+
+/*
+ *  internal ide interrupt handler type
+ */
+typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *);
+typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
+typedef int (ide_expiry_t)(ide_drive_t *);
+
+typedef struct hwgroup_s {
+		/* irq handler, if active */
+	ide_startstop_t	(*handler)(ide_drive_t *);
+		/* irq handler, suspended if active */
+	ide_startstop_t	(*handler_save)(ide_drive_t *);
+		/* BOOL: protects all fields below */
+	volatile int busy;
+		/* BOOL: wake us up on timer expiry */
+	unsigned int sleeping	: 1;
+		/* BOOL: polling active & poll_timeout field valid */
+	unsigned int polling	: 1;
+		/* current drive */
+	ide_drive_t *drive;
+		/* ptr to current hwif in linked-list */
+	ide_hwif_t *hwif;
+
+		/* for pci chipsets */
+	struct pci_dev *pci_dev;
+		/* chipset device struct */
+	struct ide_pci_device_s *cds;
+
+		/* current request */
+	struct request *rq;
+		/* failsafe timer */
+	struct timer_list timer;
+		/* local copy of current write rq */
+	struct request wrq;
+		/* timeout value during long polls */
+	unsigned long poll_timeout;
+		/* queried upon timeouts */
+	int (*expiry)(ide_drive_t *);
+		/* ide_system_bus_speed */
+	int pio_clock;
+
+	unsigned char cmd_buf[4];
+} ide_hwgroup_t;
+
+/* structure attached to the request for IDE_TASK_CMDS */
+
+/*
+ * configurable drive settings
+ */
+
+#define TYPE_INT	0
+#define TYPE_INTA	1
+#define TYPE_BYTE	2
+#define TYPE_SHORT	3
+
+#define SETTING_READ	(1 << 0)
+#define SETTING_WRITE	(1 << 1)
+#define SETTING_RW	(SETTING_READ | SETTING_WRITE)
+
+typedef int (ide_procset_t)(ide_drive_t *, int);
+typedef struct ide_settings_s {
+	char			*name;
+	int			rw;
+	int			read_ioctl;
+	int			write_ioctl;
+	int			data_type;
+	int			min;
+	int			max;
+	int			mul_factor;
+	int			div_factor;
+	void			*data;
+	ide_procset_t		*set;
+	int			auto_remove;
+	struct ide_settings_s	*next;
+} ide_settings_t;
+
+extern struct semaphore ide_setting_sem;
+extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
+extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
+extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
+extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
+extern void ide_add_generic_settings(ide_drive_t *drive);
+
+/*
+ * /proc/ide interface
+ */
+typedef struct {
+	const char	*name;
+	mode_t		mode;
+	read_proc_t	*read_proc;
+	write_proc_t	*write_proc;
+} ide_proc_entry_t;
+
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_ide_root;
+
+extern void proc_ide_create(void);
+extern void proc_ide_destroy(void);
+extern void create_proc_ide_interfaces(void);
+void destroy_proc_ide_interface(ide_hwif_t *);
+extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
+extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
+read_proc_t proc_ide_read_capacity;
+read_proc_t proc_ide_read_geometry;
+
+#ifdef CONFIG_BLK_DEV_IDEPCI
+void ide_pci_create_host_proc(const char *, get_info_t *);
+#endif
+
+/*
+ * Standard exit stuff:
+ */
+#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
+{					\
+	len -= off;			\
+	if (len < count) {		\
+		*eof = 1;		\
+		if (len <= 0)		\
+			return 0;	\
+	} else				\
+		len = count;		\
+	*start = page + off;		\
+	return len;			\
+}
+#else
+static inline void create_proc_ide_interfaces(void) { ; }
+static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
+#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
+#endif
+
+/*
+ * Power Management step value (rq->pm->pm_step).
+ *
+ * The step value starts at 0 (ide_pm_state_start_suspend) for a
+ * suspend operation or 1000 (ide_pm_state_start_resume) for a
+ * resume operation.
+ *
+ * For each step, the core calls the subdriver start_power_step() first.
+ * This can return:
+ *	- ide_stopped :	In this case, the core calls us back again unless
+ *			step have been set to ide_power_state_completed.
+ *	- ide_started :	In this case, the channel is left busy until an
+ *			async event (interrupt) occurs.
+ * Typically, start_power_step() will issue a taskfile request with
+ * do_rw_taskfile().
+ *
+ * Upon reception of the interrupt, the core will call complete_power_step()
+ * with the error code if any. This routine should update the step value
+ * and return. It should not start a new request. The core will call
+ * start_power_step for the new step value, unless step have been set to
+ * ide_power_state_completed.
+ *
+ * Subdrivers are expected to define their own additional power
+ * steps from 1..999 for suspend and from 1001..1999 for resume,
+ * other values are reserved for future use.
+ */
+
+enum {
+	ide_pm_state_completed		= -1,
+	ide_pm_state_start_suspend	= 0,
+	ide_pm_state_start_resume	= 1000,
+};
+
+/*
+ * Subdrivers support.
+ */
+typedef struct ide_driver_s {
+	struct module			*owner;
+	const char			*name;
+	const char			*version;
+	u8				media;
+	unsigned busy			: 1;
+	unsigned supports_dsc_overlap	: 1;
+	int		(*cleanup)(ide_drive_t *);
+	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, sector_t);
+	int		(*end_request)(ide_drive_t *, int, int);
+	ide_startstop_t	(*error)(ide_drive_t *, struct request *rq, u8, u8);
+	ide_startstop_t	(*abort)(ide_drive_t *, struct request *rq);
+	int		(*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
+	ide_proc_entry_t	*proc;
+	int		(*attach)(ide_drive_t *);
+	void		(*ata_prebuilder)(ide_drive_t *);
+	void		(*atapi_prebuilder)(ide_drive_t *);
+	struct device_driver	gen_driver;
+	struct list_head drives;
+	struct list_head drivers;
+} ide_driver_t;
+
+#define DRIVER(drive)		((drive)->driver)
+
+int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
+
+/*
+ * ide_hwifs[] is the master data structure used to keep track
+ * of just about everything in ide.c.  Whenever possible, routines
+ * should be using pointers to a drive (ide_drive_t *) or
+ * pointers to a hwif (ide_hwif_t *), rather than indexing this
+ * structure directly (the allocation/layout may change!).
+ *
+ */
+#ifndef _IDE_C
+extern	ide_hwif_t	ide_hwifs[];		/* master data repository */
+#endif
+extern int noautodma;
+
+extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
+extern int __ide_end_request (ide_drive_t *drive, struct request *rq, int uptodate, int nrsecs);
+
+/*
+ * This is used on exit from the driver to designate the next irq handler
+ * and also to start the safety timer.
+ */
+extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
+
+/*
+ * This is used on exit from the driver to designate the next irq handler
+ * and start the safety time safely and atomically from the IRQ handler
+ * with respect to the command issue (which it also does)
+ */
+extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
+
+ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
+
+/*
+ * ide_error() takes action based on the error returned by the controller.
+ * The caller should return immediately after invoking this.
+ *
+ * (drive, msg, status)
+ */
+ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+
+ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
+
+/*
+ * Abort a running command on the controller triggering the abort
+ * from a host side, non error situation
+ * (drive, msg)
+ */
+extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
+
+extern void ide_fix_driveid(struct hd_driveid *);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ *
+ * (s, bytecount, byteswap)
+ */
+extern void ide_fixstring(u8 *, const int, const int);
+
+/*
+ * This routine busy-waits for the drive status to be not "busy".
+ * It then checks the status for all of the "good" bits and none
+ * of the "bad" bits, and if all is okay it returns 0.  All other
+ * cases return 1 after doing "*startstop = ide_error()", and the
+ * caller should return the updated value of "startstop" in this case.
+ * "startstop" is unchanged when the function returns 0;
+ * (startstop, drive, good, bad, timeout)
+ */
+extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
+
+/*
+ * Start a reset operation for an IDE interface.
+ * The caller should return immediately after invoking this.
+ */
+extern ide_startstop_t ide_do_reset (ide_drive_t *);
+
+/*
+ * This function is intended to be used prior to invoking ide_do_drive_cmd().
+ */
+extern void ide_init_drive_cmd (struct request *rq);
+
+/*
+ * this function returns error location sector offset in case of a write error
+ */
+extern u64 ide_get_error_location(ide_drive_t *, char *);
+
+/*
+ * "action" parameter type for ide_do_drive_cmd() below.
+ */
+typedef enum {
+	ide_wait,	/* insert rq at end of list, and wait for it */
+	ide_next,	/* insert rq immediately after current request */
+	ide_preempt,	/* insert rq in front of current request */
+	ide_head_wait,	/* insert rq in front of current request and wait for it */
+	ide_end		/* insert rq at end of list, but don't wait for it */
+} ide_action_t;
+
+/*
+ * This function issues a special IDE device request
+ * onto the request queue.
+ *
+ * If action is ide_wait, then the rq is queued at the end of the
+ * request queue, and the function sleeps until it has been processed.
+ * This is for use when invoked from an ioctl handler.
+ *
+ * If action is ide_preempt, then the rq is queued at the head of
+ * the request queue, displacing the currently-being-processed
+ * request and this function returns immediately without waiting
+ * for the new rq to be completed.  This is VERY DANGEROUS, and is
+ * intended for careful use by the ATAPI tape/cdrom driver code.
+ *
+ * If action is ide_next, then the rq is queued immediately after
+ * the currently-being-processed-request (if any), and the function
+ * returns without waiting for the new rq to be completed.  As above,
+ * This is VERY DANGEROUS, and is intended for careful use by the
+ * ATAPI tape/cdrom driver code.
+ *
+ * If action is ide_end, then the rq is queued at the end of the
+ * request queue, and the function returns immediately without waiting
+ * for the new rq to be completed. This is again intended for careful
+ * use by the ATAPI tape/cdrom driver code.
+ */
+extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
+
+/*
+ * Clean up after success/failure of an explicit drive cmd.
+ * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
+ * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
+ *
+ * (ide_drive_t *drive, u8 stat, u8 err)
+ */
+extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
+
+/*
+ * Issue ATA command and wait for completion.
+ * Use for implementing commands in kernel
+ *
+ *  (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
+ */
+extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
+
+typedef struct ide_task_s {
+/*
+ *	struct hd_drive_task_hdr	tf;
+ *	task_struct_t		tf;
+ *	struct hd_drive_hob_hdr		hobf;
+ *	hob_struct_t		hobf;
+ */
+	task_ioreg_t		tfRegister[8];
+	task_ioreg_t		hobRegister[8];
+	ide_reg_valid_t		tf_out_flags;
+	ide_reg_valid_t		tf_in_flags;
+	int			data_phase;
+	int			command_type;
+	ide_pre_handler_t	*prehandler;
+	ide_handler_t		*handler;
+	struct request		*rq;		/* copy of request */
+	void			*special;	/* valid_t generally */
+} ide_task_t;
+
+extern u32 ide_read_24(ide_drive_t *);
+
+extern void SELECT_DRIVE(ide_drive_t *);
+extern void SELECT_INTERRUPT(ide_drive_t *);
+extern void SELECT_MASK(ide_drive_t *, int);
+extern void QUIRK_LIST(ide_drive_t *);
+
+extern int drive_is_ready(ide_drive_t *);
+extern int wait_for_ready(ide_drive_t *, int /* timeout */);
+
+/*
+ * taskfile io for disks for now...and builds request from ide_ioctl
+ */
+extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
+
+/*
+ * Special Flagged Register Validation Caller
+ */
+extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *);
+
+extern ide_startstop_t set_multmode_intr(ide_drive_t *);
+extern ide_startstop_t set_geometry_intr(ide_drive_t *);
+extern ide_startstop_t recal_intr(ide_drive_t *);
+extern ide_startstop_t task_no_data_intr(ide_drive_t *);
+extern ide_startstop_t task_in_intr(ide_drive_t *);
+extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
+
+extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
+
+int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
+int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
+int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
+
+extern int system_bus_clock(void);
+
+extern int ide_driveid_update(ide_drive_t *);
+extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
+extern int ide_config_drive_speed(ide_drive_t *, u8);
+extern u8 eighty_ninty_three (ide_drive_t *);
+extern int set_transfer(ide_drive_t *, ide_task_t *);
+extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
+
+extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
+
+/*
+ * ide_stall_queue() can be used by a drive to give excess bandwidth back
+ * to the hwgroup by sleeping for timeout jiffies.
+ */
+extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
+
+extern int ide_spin_wait_hwgroup(ide_drive_t *);
+extern void ide_timer_expiry(unsigned long);
+extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
+extern void do_ide_request(request_queue_t *);
+extern void ide_init_subdrivers(void);
+
+void ide_init_disk(struct gendisk *, ide_drive_t *);
+
+extern int ata_attach(ide_drive_t *);
+
+extern int ideprobe_init(void);
+
+extern void ide_scan_pcibus(int scan_direction) __init;
+extern int ide_pci_register_driver(struct pci_driver *driver);
+extern void ide_pci_unregister_driver(struct pci_driver *driver);
+void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
+extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
+
+extern void default_hwif_iops(ide_hwif_t *);
+extern void default_hwif_mmiops(ide_hwif_t *);
+extern void default_hwif_transport(ide_hwif_t *);
+
+int ide_register_driver(ide_driver_t *driver);
+void ide_unregister_driver(ide_driver_t *driver);
+int ide_register_subdriver(ide_drive_t *, ide_driver_t *);
+int ide_unregister_subdriver (ide_drive_t *drive);
+int ide_replace_subdriver(ide_drive_t *drive, const char *driver);
+
+#define ON_BOARD		1
+#define NEVER_BOARD		0
+
+#ifdef CONFIG_BLK_DEV_OFFBOARD
+#  define OFF_BOARD		ON_BOARD
+#else /* CONFIG_BLK_DEV_OFFBOARD */
+#  define OFF_BOARD		NEVER_BOARD
+#endif /* CONFIG_BLK_DEV_OFFBOARD */
+
+#define NODMA 0
+#define NOAUTODMA 1
+#define AUTODMA 2
+
+typedef struct ide_pci_enablebit_s {
+	u8	reg;	/* byte pci reg holding the enable-bit */
+	u8	mask;	/* mask to isolate the enable-bit */
+	u8	val;	/* value of masked reg when "enabled" */
+} ide_pci_enablebit_t;
+
+enum {
+	/* Uses ISA control ports not PCI ones. */
+	IDEPCI_FLAG_ISA_PORTS		= (1 << 0),
+	IDEPCI_FLAG_FORCE_PDC		= (1 << 1),
+};
+
+typedef struct ide_pci_device_s {
+	char			*name;
+	int			(*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
+	void			(*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
+	unsigned int		(*init_chipset)(struct pci_dev *, const char *);
+	void			(*init_iops)(ide_hwif_t *);
+	void                    (*init_hwif)(ide_hwif_t *);
+	void			(*init_dma)(ide_hwif_t *, unsigned long);
+	void			(*fixup)(ide_hwif_t *);
+	u8			channels;
+	u8			autodma;
+	ide_pci_enablebit_t	enablebits[2];
+	u8			bootable;
+	unsigned int		extra;
+	struct ide_pci_device_s	*next;
+	u8			flags;
+} ide_pci_device_t;
+
+extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
+extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+
+void ide_map_sg(ide_drive_t *, struct request *);
+void ide_init_sg_cmd(ide_drive_t *, struct request *);
+
+#define BAD_DMA_DRIVE		0
+#define GOOD_DMA_DRIVE		1
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
+int __ide_dma_bad_drive(ide_drive_t *);
+int __ide_dma_good_drive(ide_drive_t *);
+int ide_use_dma(ide_drive_t *);
+int __ide_dma_off(ide_drive_t *);
+void ide_dma_verbose(ide_drive_t *);
+ide_startstop_t ide_dma_intr(ide_drive_t *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+extern int ide_build_sglist(ide_drive_t *, struct request *);
+extern int ide_build_dmatable(ide_drive_t *, struct request *);
+extern void ide_destroy_dmatable(ide_drive_t *);
+extern int ide_release_dma(ide_hwif_t *);
+extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
+
+extern int __ide_dma_host_off(ide_drive_t *);
+extern int __ide_dma_off_quietly(ide_drive_t *);
+extern int __ide_dma_host_on(ide_drive_t *);
+extern int __ide_dma_on(ide_drive_t *);
+extern int __ide_dma_check(ide_drive_t *);
+extern int ide_dma_setup(ide_drive_t *);
+extern void ide_dma_start(ide_drive_t *);
+extern int __ide_dma_end(ide_drive_t *);
+extern int __ide_dma_lostirq(ide_drive_t *);
+extern int __ide_dma_timeout(ide_drive_t *);
+#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+
+#else
+static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
+static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
+static inline void ide_release_dma(ide_hwif_t *drive) {;}
+#endif
+
+extern int ide_hwif_request_regions(ide_hwif_t *hwif);
+extern void ide_hwif_release_regions(ide_hwif_t* hwif);
+extern void ide_unregister (unsigned int index);
+
+void ide_register_region(struct gendisk *);
+void ide_unregister_region(struct gendisk *);
+
+void ide_undecoded_slave(ide_hwif_t *);
+
+int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
+extern int probe_hwif_init(ide_hwif_t *);
+
+static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
+{
+	return hwif->hwif_data;
+}
+
+static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
+{
+	hwif->hwif_data = data;
+}
+
+/* ide-lib.c */
+extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
+extern u8 ide_rate_filter(u8 mode, u8 speed); 
+extern int ide_dma_enable(ide_drive_t *drive);
+extern char *ide_xfer_verbose(u8 xfer_rate);
+extern void ide_toggle_bounce(ide_drive_t *drive, int on);
+extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
+
+u8 ide_dump_status(ide_drive_t *, const char *, u8);
+
+typedef struct ide_pio_timings_s {
+	int	setup_time;	/* Address setup (ns) minimum */
+	int	active_time;	/* Active pulse (ns) minimum */
+	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
+} ide_pio_timings_t;
+
+typedef struct ide_pio_data_s {
+	u8 pio_mode;
+	u8 use_iordy;
+	u8 overridden;
+	u8 blacklisted;
+	unsigned int cycle_time;
+} ide_pio_data_t;
+
+extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+extern const ide_pio_timings_t ide_pio_timings[6];
+
+
+extern spinlock_t ide_lock;
+extern struct semaphore ide_cfg_sem;
+/*
+ * Structure locking:
+ *
+ * ide_cfg_sem and ide_lock together protect changes to
+ * ide_hwif_t->{next,hwgroup}
+ * ide_drive_t->next
+ *
+ * ide_hwgroup_t->busy: ide_lock
+ * ide_hwgroup_t->hwif: ide_lock
+ * ide_hwif_t->mate: constant, no locking
+ * ide_drive_t->hwif: constant, no locking
+ */
+
+#define local_irq_set(flags)	do { local_save_flags((flags)); local_irq_enable(); } while (0)
+
+extern struct bus_type ide_bus_type;
+
+/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
+#define ide_id_has_flush_cache(id)	((id)->cfs_enable_2 & 0x3000)
+
+/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
+#define ide_id_has_flush_cache_ext(id)	\
+	(((id)->cfs_enable_2 & 0x2400) == 0x2400)
+
+#endif /* _IDE_H */
diff --git a/include/linux/idr.h b/include/linux/idr.h
new file mode 100644
index 000000000000..ca3b7e462576
--- /dev/null
+++ b/include/linux/idr.h
@@ -0,0 +1,78 @@
+/*
+ * include/linux/idr.h
+ * 
+ * 2002-10-18  written by Jim Houston jim.houston@ccur.com
+ *	Copyright (C) 2002 by Concurrent Computer Corporation
+ *	Distributed under the GNU GPL license version 2.
+ *
+ * Small id to pointer translation service avoiding fixed sized
+ * tables.
+ */
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#if BITS_PER_LONG == 32
+# define IDR_BITS 5
+# define IDR_FULL 0xfffffffful
+/* We can only use two of the bits in the top level because there is
+   only one possible bit in the top level (5 bits * 7 levels = 35
+   bits, but you only use 31 bits in the id). */
+# define TOP_LEVEL_FULL (IDR_FULL >> 30)
+#elif BITS_PER_LONG == 64
+# define IDR_BITS 6
+# define IDR_FULL 0xfffffffffffffffful
+/* We can only use two of the bits in the top level because there is
+   only one possible bit in the top level (6 bits * 6 levels = 36
+   bits, but you only use 31 bits in the id). */
+# define TOP_LEVEL_FULL (IDR_FULL >> 62)
+#else
+# error "BITS_PER_LONG is not 32 or 64"
+#endif
+
+#define IDR_SIZE (1 << IDR_BITS)
+#define IDR_MASK ((1 << IDR_BITS)-1)
+
+#define MAX_ID_SHIFT (sizeof(int)*8 - 1)
+#define MAX_ID_BIT (1U << MAX_ID_SHIFT)
+#define MAX_ID_MASK (MAX_ID_BIT - 1)
+
+/* Leave the possibility of an incomplete final layer */
+#define MAX_LEVEL (MAX_ID_SHIFT + IDR_BITS - 1) / IDR_BITS
+
+/* Number of id_layer structs to leave in free list */
+#define IDR_FREE_MAX MAX_LEVEL + MAX_LEVEL
+
+struct idr_layer {
+	unsigned long		 bitmap; /* A zero bit means "space here" */
+	struct idr_layer	*ary[1<<IDR_BITS];
+	int			 count;	 /* When zero, we can release it */
+};
+
+struct idr {
+	struct idr_layer *top;
+	struct idr_layer *id_free;
+	int		  layers;
+	int		  id_free_cnt;
+	spinlock_t	  lock;
+};
+
+#define IDR_INIT(name)						\
+{								\
+	.top		= NULL,					\
+	.id_free	= NULL,					\
+	.layers 	= 0,					\
+	.id_free_cnt	= 0,					\
+	.lock		= SPIN_LOCK_UNLOCKED,			\
+}
+#define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
+
+/*
+ * This is what we export.
+ */
+
+void *idr_find(struct idr *idp, int id);
+int idr_pre_get(struct idr *idp, unsigned gfp_mask);
+int idr_get_new(struct idr *idp, void *ptr, int *id);
+int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+void idr_remove(struct idr *idp, int id);
+void idr_init(struct idr *idp);
diff --git a/include/linux/if.h b/include/linux/if.h
new file mode 100644
index 000000000000..110282dbd3e0
--- /dev/null
+++ b/include/linux/if.h
@@ -0,0 +1,193 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the INET interface module.
+ *
+ * Version:	@(#)if.h	1.0.2	04/18/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
+ *		Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_H
+#define _LINUX_IF_H
+
+#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/compiler.h>		/* for "__user" et al           */
+
+#define	IFNAMSIZ	16
+#include <linux/hdlc/ioctl.h>
+
+/* Standard interface flags (netdevice->flags). */
+#define	IFF_UP		0x1		/* interface is up		*/
+#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
+#define	IFF_DEBUG	0x4		/* turn on debugging		*/
+#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
+#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
+#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
+#define	IFF_RUNNING	0x40		/* resources allocated		*/
+#define	IFF_NOARP	0x80		/* no ARP protocol		*/
+#define	IFF_PROMISC	0x100		/* receive all packets		*/
+#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
+
+#define IFF_MASTER	0x400		/* master of a load balancer 	*/
+#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
+
+#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
+
+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
+
+#define IFF_PORTSEL	0x2000          /* can set media type		*/
+#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
+#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
+
+/* Private (from user) interface flags (netdevice->priv_flags). */
+#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
+#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
+
+#define IF_GET_IFACE	0x0001		/* for querying only */
+#define IF_GET_PROTO	0x0002
+
+/* For definitions see hdlc.h */
+#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
+#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
+#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
+#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
+#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
+#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
+#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
+
+/* For definitions see hdlc.h */
+#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
+#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
+#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
+#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
+#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
+#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
+#define IF_PROTO_X25	0x2006		/* X.25				*/
+#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
+#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
+#define IF_PROTO_FR_ETH_PVC 0x200B
+#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
+
+
+/*
+ *	Device mapping structure. I'd just gone off and designed a 
+ *	beautiful scheme using only loadable modules with arguments
+ *	for driver options and along come the PCMCIA people 8)
+ *
+ *	Ah well. The get() side of this is good for WDSETUP, and it'll
+ *	be handy for debugging things. The set side is fine for now and
+ *	being very small might be worth keeping for clean configuration.
+ */
+
+struct ifmap 
+{
+	unsigned long mem_start;
+	unsigned long mem_end;
+	unsigned short base_addr; 
+	unsigned char irq;
+	unsigned char dma;
+	unsigned char port;
+	/* 3 bytes spare */
+};
+
+struct if_settings
+{
+	unsigned int type;	/* Type of physical device or protocol */
+	unsigned int size;	/* Size of the data allocated by the caller */
+	union {
+		/* {atm/eth/dsl}_settings anyone ? */
+		raw_hdlc_proto		__user *raw_hdlc;
+		cisco_proto		__user *cisco;
+		fr_proto		__user *fr;
+		fr_proto_pvc		__user *fr_pvc;
+		fr_proto_pvc_info	__user *fr_pvc_info;
+
+		/* interface settings */
+		sync_serial_settings	__user *sync;
+		te1_settings		__user *te1;
+	} ifs_ifsu;
+};
+
+/*
+ * Interface request structure used for socket
+ * ioctl's.  All interface ioctl's must have parameter
+ * definitions which begin with ifr_name.  The
+ * remainder may be interface specific.
+ */
+
+struct ifreq 
+{
+#define IFHWADDRLEN	6
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
+	} ifr_ifrn;
+	
+	union {
+		struct	sockaddr ifru_addr;
+		struct	sockaddr ifru_dstaddr;
+		struct	sockaddr ifru_broadaddr;
+		struct	sockaddr ifru_netmask;
+		struct  sockaddr ifru_hwaddr;
+		short	ifru_flags;
+		int	ifru_ivalue;
+		int	ifru_mtu;
+		struct  ifmap ifru_map;
+		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
+		char	ifru_newname[IFNAMSIZ];
+		void __user *	ifru_data;
+		struct	if_settings ifru_settings;
+	} ifr_ifru;
+};
+
+#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
+#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
+#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
+#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
+#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
+#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
+#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
+#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
+#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
+#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
+#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
+#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
+#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
+#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
+#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
+#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
+#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
+
+/*
+ * Structure used in SIOCGIFCONF request.
+ * Used to retrieve interface configuration
+ * for machine (useful for programs which
+ * must know all networks accessible).
+ */
+
+struct ifconf 
+{
+	int	ifc_len;			/* size of buffer	*/
+	union 
+	{
+		char __user *ifcu_buf;
+		struct ifreq __user *ifcu_req;
+	} ifc_ifcu;
+};
+#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
+#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
+
+
+#endif /* _LINUX_IF_H */
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
new file mode 100644
index 000000000000..af380cb876a0
--- /dev/null
+++ b/include/linux/if_arcnet.h
@@ -0,0 +1,137 @@
+/*
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  INET is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              Global definitions for the ARCnet interface.
+ *
+ * Authors:     David Woodhouse and Avery Pennarun
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_ARCNET_H
+#define _LINUX_IF_ARCNET_H
+
+#include <linux/if_ether.h>
+
+
+/*
+ *    These are the defined ARCnet Protocol ID's.
+ */
+
+/* CAP mode */
+/* No macro but uses 1-8 */
+
+/* RFC1201 Protocol ID's */
+#define ARC_P_IP		212	/* 0xD4 */
+#define ARC_P_IPV6		196	/* 0xC4: RFC2497 */
+#define ARC_P_ARP		213	/* 0xD5 */
+#define ARC_P_RARP		214	/* 0xD6 */
+#define ARC_P_IPX		250	/* 0xFA */
+#define ARC_P_NOVELL_EC		236	/* 0xEC */
+
+/* Old RFC1051 Protocol ID's */
+#define ARC_P_IP_RFC1051	240	/* 0xF0 */
+#define ARC_P_ARP_RFC1051	241	/* 0xF1 */
+
+/* MS LanMan/WfWg "NDIS" encapsulation */
+#define ARC_P_ETHER		232	/* 0xE8 */
+
+/* Unsupported/indirectly supported protocols */
+#define ARC_P_DATAPOINT_BOOT	0	/* very old Datapoint equipment */
+#define ARC_P_DATAPOINT_MOUNT	1
+#define ARC_P_POWERLAN_BEACON	8	/* Probably ATA-Netbios related */
+#define ARC_P_POWERLAN_BEACON2	243	/* 0xF3 */
+#define ARC_P_LANSOFT		251	/* 0xFB - what is this? */
+#define ARC_P_ATALK		0xDD
+
+/* Hardware address length */
+#define ARCNET_ALEN	1
+
+/*
+ * The RFC1201-specific components of an arcnet packet header.
+ */
+struct arc_rfc1201
+{
+    uint8_t  proto;		/* protocol ID field - varies		*/
+    uint8_t  split_flag;	/* for use with split packets		*/
+    uint16_t sequence;		/* sequence number			*/
+    uint8_t  payload[0];	/* space remaining in packet (504 bytes)*/
+};
+#define RFC1201_HDR_SIZE 4
+
+
+/*
+ * The RFC1051-specific components.
+ */
+struct arc_rfc1051
+{
+    uint8_t proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
+    uint8_t payload[0];		/* 507 bytes			*/
+};
+#define RFC1051_HDR_SIZE 1
+
+
+/*
+ * The ethernet-encap-specific components.  We have a real ethernet header
+ * and some data.
+ */
+struct arc_eth_encap
+{
+    uint8_t proto;		/* Always ARC_P_ETHER			*/
+    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
+    uint8_t payload[0];		/* 493 bytes				*/
+};
+#define ETH_ENCAP_HDR_SIZE 14
+
+
+struct arc_cap
+{
+	uint8_t proto;
+	uint8_t cookie[sizeof(int)];   /* Actually NOT sent over the network */
+	union {
+		uint8_t ack;
+		uint8_t raw[0];		/* 507 bytes */
+	} mes;
+};
+
+/*
+ * The data needed by the actual arcnet hardware.
+ *
+ * Now, in the real arcnet hardware, the third and fourth bytes are the
+ * 'offset' specification instead of the length, and the soft data is at
+ * the _end_ of the 512-byte buffer.  We hide this complexity inside the
+ * driver.
+ */
+struct arc_hardware
+{
+    uint8_t  source,		/* source ARCnet - filled in automagically */
+             dest,		/* destination ARCnet - 0 for broadcast    */
+    	     offset[2];		/* offset bytes (some weird semantics)     */
+};
+#define ARC_HDR_SIZE 4
+
+/*
+ * This is an ARCnet frame header, as seen by the kernel (and userspace,
+ * when you do a raw packet capture).
+ */
+struct archdr
+{
+    /* hardware requirements */
+    struct arc_hardware hard;
+     
+    /* arcnet encapsulation-specific bits */
+    union {
+	struct arc_rfc1201   rfc1201;
+	struct arc_rfc1051   rfc1051;
+	struct arc_eth_encap eth_encap;
+	struct arc_cap       cap;
+	uint8_t raw[0];		/* 508 bytes				*/
+    } soft;
+};
+
+#endif				/* _LINUX_IF_ARCNET_H */
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
new file mode 100644
index 000000000000..bbf49bcd7705
--- /dev/null
+++ b/include/linux/if_arp.h
@@ -0,0 +1,150 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version:	@(#)if_arp.h	1.0.1	04/16/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ *		Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Florian La Roche,
+ *		Jonathan Layes <layes@loran.com>
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_ARP_H
+#define _LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
+#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
+#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
+#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
+#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
+#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
+#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
+#define	ARPHRD_ARCNET	7		/* ARCnet			*/
+#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
+#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
+#define ARPHRD_ATM	19		/* ATM 				*/
+#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
+#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
+#define ARPHRD_EUI64	27		/* EUI-64                       */
+#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP	256
+#define ARPHRD_CSLIP	257
+#define ARPHRD_SLIP6	258
+#define ARPHRD_CSLIP6	259
+#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
+#define ARPHRD_ADAPT	264
+#define ARPHRD_ROSE	270
+#define ARPHRD_X25	271		/* CCITT X.25			*/
+#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
+#define ARPHRD_PPP	512
+#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
+#define ARPHRD_HDLC	ARPHRD_CISCO
+#define ARPHRD_LAPB	516		/* LAPB				*/
+#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
+#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
+
+#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
+#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
+#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
+#define ARPHRD_SKIP	771		/* SKIP vif			*/
+#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
+#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
+#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
+#define ARPHRD_BIF      775             /* AP1000 BIF                   */
+#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
+#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
+#define ARPHRD_IPGRE	778		/* GRE over IP			*/
+#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
+#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
+#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
+#define ARPHRD_ECONET	782		/* Acorn Econet			*/
+#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
+/* ARP works differently on different FC media .. so  */
+#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
+#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
+#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
+	/* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
+#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
+#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
+
+#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
+#define ARPHRD_NONE	  0xFFFE	/* zero header length */
+
+/* ARP protocol opcodes. */
+#define	ARPOP_REQUEST	1		/* ARP request			*/
+#define	ARPOP_REPLY	2		/* ARP reply			*/
+#define	ARPOP_RREQUEST	3		/* RARP request			*/
+#define	ARPOP_RREPLY	4		/* RARP reply			*/
+#define	ARPOP_InREQUEST	8		/* InARP request		*/
+#define	ARPOP_InREPLY	9		/* InARP reply			*/
+#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
+
+
+/* ARP ioctl request. */
+struct arpreq {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_old {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM		0x02		/* completed entry (ha valid)	*/
+#define	ATF_PERM	0x04		/* permanent entry		*/
+#define	ATF_PUBL	0x08		/* publish entry		*/
+#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
+#define ATF_NETMASK     0x20            /* want to use a netmask (only
+					   for proxy entries) */
+#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+
+/*
+ *	This structure defines an ethernet arp header.
+ */
+
+struct arphdr
+{
+	unsigned short	ar_hrd;		/* format of hardware address	*/
+	unsigned short	ar_pro;		/* format of protocol address	*/
+	unsigned char	ar_hln;		/* length of hardware address	*/
+	unsigned char	ar_pln;		/* length of protocol address	*/
+	unsigned short	ar_op;		/* ARP opcode (command)		*/
+
+#if 0
+	 /*
+	  *	 Ethernet looks like this : This bit is variable sized however...
+	  */
+	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
+	unsigned char		ar_sip[4];		/* sender IP address		*/
+	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
+	unsigned char		ar_tip[4];		/* target IP address		*/
+#endif
+
+};
+
+#endif	/* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
new file mode 100644
index 000000000000..57024ce2c74f
--- /dev/null
+++ b/include/linux/if_bonding.h
@@ -0,0 +1,117 @@
+/*
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
+ *
+ *
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ * BUT, I'm the one who modified it for ethernet, so:
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU Public License, incorporated herein by reference.
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
+ *	- Added support for getting slave's speed and duplex via ethtool.
+ *	  Needed for 802.3ad and other future modes.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Enable support of modes that need to use the unique mac address of
+ *	  each slave.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Amir Noam <amir.noam at intel dot com>
+ *	- Moved driver's private data types to bonding.h
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
+ *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
+ *
+ * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
+ *	- Added ABI version control to restore compatibility between
+ *	  new/old ifenslave and new/old bonding.
+ *
+ * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Code cleanup and style changes
+ */
+
+#ifndef _LINUX_IF_BONDING_H
+#define _LINUX_IF_BONDING_H
+
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* userland - kernel ABI version (2003/05/08) */
+#define BOND_ABI_VERSION 2
+
+/*
+ * We can remove these ioctl definitions in 2.5.  People should use the
+ * SIOC*** versions of them instead
+ */
+#define BOND_ENSLAVE_OLD		(SIOCDEVPRIVATE)
+#define BOND_RELEASE_OLD		(SIOCDEVPRIVATE + 1)
+#define BOND_SETHWADDR_OLD		(SIOCDEVPRIVATE + 2)
+#define BOND_SLAVE_INFO_QUERY_OLD	(SIOCDEVPRIVATE + 11)
+#define BOND_INFO_QUERY_OLD		(SIOCDEVPRIVATE + 12)
+#define BOND_CHANGE_ACTIVE_OLD		(SIOCDEVPRIVATE + 13)
+
+#define BOND_CHECK_MII_STATUS	(SIOCGMIIPHY)
+
+#define BOND_MODE_ROUNDROBIN	0
+#define BOND_MODE_ACTIVEBACKUP	1
+#define BOND_MODE_XOR		2
+#define BOND_MODE_BROADCAST	3
+#define BOND_MODE_8023AD        4
+#define BOND_MODE_TLB           5
+#define BOND_MODE_ALB		6 /* TLB + RLB (receive load balancing) */
+
+/* each slave's link has 4 states */
+#define BOND_LINK_UP    0           /* link is up and running */
+#define BOND_LINK_FAIL  1           /* link has just gone down */
+#define BOND_LINK_DOWN  2           /* link has been down for too long time */
+#define BOND_LINK_BACK  3           /* link is going back */
+
+/* each slave has several states */
+#define BOND_STATE_ACTIVE       0   /* link is active */
+#define BOND_STATE_BACKUP       1   /* link is backup */
+
+#define BOND_DEFAULT_MAX_BONDS  1   /* Default maximum number of devices to support */
+
+typedef struct ifbond {
+	__s32 bond_mode;
+	__s32 num_slaves;
+	__s32 miimon;
+} ifbond;
+
+typedef struct ifslave
+{
+	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
+	char slave_name[IFNAMSIZ];
+	__s8 link;
+	__s8 state;
+	__u32  link_failure_count;
+} ifslave;
+
+struct ad_info {
+	__u16 aggregator_id;
+	__u16 ports;
+	__u16 actor_key;
+	__u16 partner_key;
+	__u8 partner_system[ETH_ALEN];
+};
+
+#endif /* _LINUX_IF_BONDING_H */
+
+/*
+ * Local variables:
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
+
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
new file mode 100644
index 000000000000..fd1b6eb94a5f
--- /dev/null
+++ b/include/linux/if_bridge.h
@@ -0,0 +1,113 @@
+/*
+ *	Linux ethernet bridge
+ *
+ *	Authors:
+ *	Lennert Buytenhek		<buytenh@gnu.org>
+ *
+ *	$Id: if_bridge.h,v 1.1 2000/02/18 16:47:01 davem Exp $
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_BRIDGE_H
+#define _LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR	"bridge"
+#define SYSFS_BRIDGE_FDB	"brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR	"brport"
+#define SYSFS_BRIDGE_PORT_LINK	"bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info
+{
+	__u64 designated_root;
+	__u64 bridge_id;
+	__u32 root_path_cost;
+	__u32 max_age;
+	__u32 hello_time;
+	__u32 forward_delay;
+	__u32 bridge_max_age;
+	__u32 bridge_hello_time;
+	__u32 bridge_forward_delay;
+	__u8 topology_change;
+	__u8 topology_change_detected;
+	__u8 root_port;
+	__u8 stp_enabled;
+	__u32 ageing_time;
+	__u32 gc_interval;
+	__u32 hello_timer_value;
+	__u32 tcn_timer_value;
+	__u32 topology_change_timer_value;
+	__u32 gc_timer_value;
+};
+
+struct __port_info
+{
+	__u64 designated_root;
+	__u64 designated_bridge;
+	__u16 port_id;
+	__u16 designated_port;
+	__u32 path_cost;
+	__u32 designated_cost;
+	__u8 state;
+	__u8 top_change_ack;
+	__u8 config_pending;
+	__u8 unused0;
+	__u32 message_age_timer_value;
+	__u32 forward_delay_timer_value;
+	__u32 hold_timer_value;
+};
+
+struct __fdb_entry
+{
+	__u8 mac_addr[6];
+	__u8 port_no;
+	__u8 is_local;
+	__u32 ageing_timer_value;
+	__u32 unused;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+
+extern void brioctl_set(int (*ioctl_hook)(unsigned int, void __user *));
+extern int (*br_handle_frame_hook)(struct net_bridge_port *p, struct sk_buff **pskb);
+extern int (*br_should_route_hook)(struct sk_buff **pskb);
+
+#endif
+
+#endif
diff --git a/include/linux/if_cablemodem.h b/include/linux/if_cablemodem.h
new file mode 100644
index 000000000000..9ca1007edd93
--- /dev/null
+++ b/include/linux/if_cablemodem.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_CABLEMODEM_H_
+#define _LINUX_CABLEMODEM_H_
+/*
+ *		Author: Franco Venturi <fventuri@mediaone.net>
+ *		Copyright 1998 Franco Venturi
+ *
+ *		This program is free software; you can redistribute it
+ *		and/or  modify it under  the terms of  the GNU General
+ *		Public  License as  published  by  the  Free  Software
+ *		Foundation;  either  version 2 of the License, or  (at
+ *		your option) any later version.
+ */
+
+/* some useful defines for sb1000.c e cmconfig.c - fv */
+#define SIOCGCMSTATS		SIOCDEVPRIVATE+0	/* get cable modem stats */
+#define SIOCGCMFIRMWARE		SIOCDEVPRIVATE+1	/* get cm firmware version */
+#define SIOCGCMFREQUENCY	SIOCDEVPRIVATE+2	/* get cable modem frequency */
+#define SIOCSCMFREQUENCY	SIOCDEVPRIVATE+3	/* set cable modem frequency */
+#define SIOCGCMPIDS			SIOCDEVPRIVATE+4	/* get cable modem PIDs */
+#define SIOCSCMPIDS			SIOCDEVPRIVATE+5	/* set cable modem PIDs */
+
+#endif
diff --git a/include/linux/if_ec.h b/include/linux/if_ec.h
new file mode 100644
index 000000000000..e7499aa79783
--- /dev/null
+++ b/include/linux/if_ec.h
@@ -0,0 +1,72 @@
+/* Definitions for Econet sockets. */
+
+#ifndef __LINUX_IF_EC
+#define __LINUX_IF_EC
+
+/* User visible stuff. Glibc provides its own but libc5 folk will use these */
+
+struct ec_addr
+{
+  unsigned char station;		/* Station number.  */
+  unsigned char net;			/* Network number.  */
+};
+
+struct sockaddr_ec
+{
+  unsigned short sec_family;
+  unsigned char port;			/* Port number.  */
+  unsigned char cb;			/* Control/flag byte.  */
+  unsigned char type;			/* Type of message.  */
+  struct ec_addr addr;
+  unsigned long cookie;
+};
+
+#define ECTYPE_PACKET_RECEIVED		0	/* Packet received */
+#define ECTYPE_TRANSMIT_STATUS		0x10	/* Transmit completed, 
+						   low nibble holds status */
+
+#define ECTYPE_TRANSMIT_OK		1
+#define ECTYPE_TRANSMIT_NOT_LISTENING	2
+#define ECTYPE_TRANSMIT_NET_ERROR	3
+#define ECTYPE_TRANSMIT_NO_CLOCK	4
+#define ECTYPE_TRANSMIT_LINE_JAMMED	5
+#define ECTYPE_TRANSMIT_NOT_PRESENT	6
+
+#ifdef __KERNEL__
+
+#define EC_HLEN				6
+
+/* This is what an Econet frame looks like on the wire. */
+struct ec_framehdr 
+{
+  unsigned char dst_stn;
+  unsigned char dst_net;
+  unsigned char src_stn;
+  unsigned char src_net;
+  unsigned char cb;
+  unsigned char port;
+};
+
+struct econet_sock {
+  /* struct sock has to be the first member of econet_sock */
+  struct sock	sk;
+  unsigned char cb;
+  unsigned char port;
+  unsigned char station;
+  unsigned char net;
+  unsigned short num;
+};
+
+static inline struct econet_sock *ec_sk(const struct sock *sk)
+{
+	return (struct econet_sock *)sk;
+}
+
+struct ec_device
+{
+  unsigned char station, net;		/* Econet protocol address */
+};
+
+#endif
+
+#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
new file mode 100644
index 000000000000..b68752fdc5c4
--- /dev/null
+++ b/include/linux/if_eql.h
@@ -0,0 +1,84 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ * 
+ * The author may be reached as simon@ncm.com, or C/O
+ *    NCM
+ *    Attn: Simon Janes
+ *    6803 Whittier Ave
+ *    McLean VA 22101
+ *    Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _LINUX_IF_EQL_H
+#define _LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES     4
+#define EQL_DEFAULT_MTU            576
+#define EQL_DEFAULT_RESCHED_IVAL   100
+
+#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+#ifdef __KERNEL__
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+
+typedef struct slave {
+	struct list_head	list;
+	struct net_device	*dev;
+	long			priority;
+	long			priority_bps;
+	long			priority_Bps;
+	long			bytes_queued;
+} slave_t;
+
+typedef struct slave_queue {
+	spinlock_t		lock;
+	struct list_head	all_slaves;
+	int			num_slaves;
+	struct net_device	*master_dev;
+} slave_queue_t;
+
+typedef struct equalizer {
+	slave_queue_t		queue;
+	int			min_slaves;
+	int			max_slaves;
+	struct net_device_stats	stats;
+	struct timer_list	timer;
+} equalizer_t;  
+
+#endif /* __KERNEL__ */
+
+typedef struct master_config {
+	char	master_name[16];
+	int	max_slaves;
+	int	min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+	char	slave_name[16];
+	long	priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+	char	slave_name[16];
+	long	priority;
+} slaving_request_t;
+
+
+#endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
new file mode 100644
index 000000000000..b5b58e9c054c
--- /dev/null
+++ b/include/linux/if_ether.h
@@ -0,0 +1,115 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@redhat.com>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+ 
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence). 
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+ 
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+
+/*
+ *	This is an Ethernet frame header.
+ */
+ 
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	unsigned short	h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
+{
+	return (struct ethhdr *)skb->mac.raw;
+}
+#endif
+
+#endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h
new file mode 100644
index 000000000000..33330b458b95
--- /dev/null
+++ b/include/linux/if_fc.h
@@ -0,0 +1,50 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for Fibre Channel.
+ *
+ * Version:	@(#)if_fc.h	0.0	11/20/98
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *	  Vineet Abraham, <vma@iol.unh.edu>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_FC_H
+#define _LINUX_IF_FC_H
+
+
+#define FC_ALEN	6		/* Octets in one ethernet addr	 */
+#define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
+#define FC_ID_LEN 3		/* Octets in a Fibre Channel Address */
+
+/* LLC and SNAP constants */
+#define EXTENDED_SAP 0xAA
+#define UI_CMD       0x03
+
+/* This is NOT the Fibre Channel frame header. The FC frame header is
+ *  constructed in the driver as the Tachyon needs certain fields in
+ *  certains positions. So, it can't be generalized here.*/
+
+struct fch_hdr {
+	__u8  daddr[FC_ALEN];		/* destination address */
+	__u8  saddr[FC_ALEN];		/* source address */
+};
+
+/* This is a Fibre Channel LLC structure */
+struct fcllc {
+	__u8  dsap;			/* destination SAP */
+	__u8  ssap;			/* source SAP */
+	__u8  llc;			/* LLC control field */
+	__u8  protid[3];		/* protocol id */
+	__u16 ethertype;		/* ether type field */
+};
+
+#endif	/* _LINUX_IF_FC_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
new file mode 100644
index 000000000000..a912818e6361
--- /dev/null
+++ b/include/linux/if_fddi.h
@@ -0,0 +1,197 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ANSI FDDI interface.
+ *
+ * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Donald Becker, <becker@super.org>
+ *			Alan Cox, <alan@redhat.com>
+ *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_FDDI_H
+#define _LINUX_IF_FDDI_H
+
+/*
+ *  Define max and min legal sizes.  The frame sizes do not include
+ *  4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID					0x00	
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
+#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
+#define FDDI_FC_K_SMT_MIN				0x41
+#define FDDI_FC_K_SMT_MAX		   		0x4F
+#define FDDI_FC_K_MAC_MIN				0xC1
+#define FDDI_FC_K_MAC_MAX		  		0xCF	
+#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
+#define FDDI_FC_K_RESERVED_MIN			0x70
+#define FDDI_FC_K_RESERVED_MAX			0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP	0xAA
+#define FDDI_UI_CMD			0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr
+	{
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl;					/* control byte #1 */
+	} __attribute__ ((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr
+	{
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl_1;					/* control byte #1 */
+	__u8	ctrl_2;					/* control byte #2 */
+	} __attribute__ ((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN	3
+struct fddi_snap_hdr
+	{
+	__u8	dsap;					/* always 0xAA */
+	__u8	ssap;					/* always 0xAA */
+	__u8	ctrl;					/* always 0x03 */
+	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
+	__u16	ethertype;				/* packet type ID field */
+	} __attribute__ ((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr
+	{
+	__u8	fc;						/* frame control */
+	__u8	daddr[FDDI_K_ALEN];		/* destination address */
+	__u8	saddr[FDDI_K_ALEN];		/* source address */
+	union
+		{
+		struct fddi_8022_1_hdr		llc_8022_1;
+		struct fddi_8022_2_hdr		llc_8022_2;
+		struct fddi_snap_hdr		llc_snap;
+		} hdr;
+	} __attribute__ ((packed));
+
+/* Define FDDI statistics structure */
+struct fddi_statistics {
+
+	/* Generic statistics. */
+
+	struct net_device_stats gen;
+
+	/* Detailed FDDI statistics.  Adopted from RFC 1512 */
+
+	__u8	smt_station_id[8];
+	__u32	smt_op_version_id;
+	__u32	smt_hi_version_id;
+	__u32	smt_lo_version_id;
+	__u8	smt_user_data[32];
+	__u32	smt_mib_version_id;
+	__u32	smt_mac_cts;
+	__u32	smt_non_master_cts;
+	__u32	smt_master_cts;
+	__u32	smt_available_paths;
+	__u32	smt_config_capabilities;
+	__u32	smt_config_policy;
+	__u32	smt_connection_policy;
+	__u32	smt_t_notify;
+	__u32	smt_stat_rpt_policy;
+	__u32	smt_trace_max_expiration;
+	__u32	smt_bypass_present;
+	__u32	smt_ecm_state;
+	__u32	smt_cf_state;
+	__u32	smt_remote_disconnect_flag;
+	__u32	smt_station_status;
+	__u32	smt_peer_wrap_flag;
+	__u32	smt_time_stamp;
+	__u32	smt_transition_time_stamp;
+	__u32	mac_frame_status_functions;
+	__u32	mac_t_max_capability;
+	__u32	mac_tvx_capability;
+	__u32	mac_available_paths;
+	__u32	mac_current_path;
+	__u8	mac_upstream_nbr[FDDI_K_ALEN];
+	__u8	mac_downstream_nbr[FDDI_K_ALEN];
+	__u8	mac_old_upstream_nbr[FDDI_K_ALEN];
+	__u8	mac_old_downstream_nbr[FDDI_K_ALEN];
+	__u32	mac_dup_address_test;
+	__u32	mac_requested_paths;
+	__u32	mac_downstream_port_type;
+	__u8	mac_smt_address[FDDI_K_ALEN];
+	__u32	mac_t_req;
+	__u32	mac_t_neg;
+	__u32	mac_t_max;
+	__u32	mac_tvx_value;
+	__u32	mac_frame_cts;
+	__u32	mac_copied_cts;
+	__u32	mac_transmit_cts;
+	__u32	mac_error_cts;
+	__u32	mac_lost_cts;
+	__u32	mac_frame_error_threshold;
+	__u32	mac_frame_error_ratio;
+	__u32	mac_rmt_state;
+	__u32	mac_da_flag;
+	__u32	mac_una_da_flag;
+	__u32	mac_frame_error_flag;
+	__u32	mac_ma_unitdata_available;
+	__u32	mac_hardware_present;
+	__u32	mac_ma_unitdata_enable;
+	__u32	path_tvx_lower_bound;
+	__u32	path_t_max_lower_bound;
+	__u32	path_max_t_req;
+	__u32	path_configuration[8];
+	__u32	port_my_type[2];
+	__u32	port_neighbor_type[2];
+	__u32	port_connection_policies[2];
+	__u32	port_mac_indicated[2];
+	__u32	port_current_path[2];
+	__u8	port_requested_paths[3*2];
+	__u32	port_mac_placement[2];
+	__u32	port_available_paths[2];
+	__u32	port_pmd_class[2];
+	__u32	port_connection_capabilities[2];
+	__u32	port_bs_flag[2];
+	__u32	port_lct_fail_cts[2];
+	__u32	port_ler_estimate[2];
+	__u32	port_lem_reject_cts[2];
+	__u32	port_lem_cts[2];
+	__u32	port_ler_cutoff[2];
+	__u32	port_ler_alarm[2];
+	__u32	port_connect_state[2];
+	__u32	port_pcm_state[2];
+	__u32	port_pc_withhold[2];
+	__u32	port_ler_flag[2];
+	__u32	port_hardware_present[2];
+	};
+
+#endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
new file mode 100644
index 000000000000..3c94b1736570
--- /dev/null
+++ b/include/linux/if_frad.h
@@ -0,0 +1,200 @@
+/*
+ * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
+ *		created for each DLCI associated with a FRAD.  The FRAD driver
+ *		is not truly a network device, but the lower level device
+ *		handler.  This allows other FRAD manufacturers to use the DLCI
+ *		code, including its RFC1490 encapsulation alongside the current
+ *		implementation for the Sangoma cards.
+ *
+ * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	changed structure defs (packed)
+ *					re-arranged flags
+ *					added DLCI_RET vars
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _FRAD_H_
+#define _FRAD_H_
+
+#include <linux/config.h>
+#include <linux/if.h>
+
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+   char  devname[IFNAMSIZ];
+   short dlci;
+};
+
+#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
+
+/* 
+ * These are related to the Sangoma SDLA and should remain in order. 
+ * Code within the SDLA module is based on the specifics of this 
+ * structure.  Change at your own peril.
+ */
+struct dlci_conf {
+   short flags;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status read */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT	0x0001
+#define DLCI_ACCOUNT_CIR_IN	0x0002
+#define DLCI_BUFFER_IF		0x0008
+
+#define DLCI_VALID_FLAGS	0x000B
+
+/* FRAD driver uses these to indicate what it did with packet */
+#define DLCI_RET_OK		0x00
+#define DLCI_RET_ERR		0x01
+#define DLCI_RET_DROP		0x02
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
+#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL	FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA.  If changes are 
+ * necessary to this structure, a routine will need to be 
+ * added to that module to copy fields.
+ */
+struct frad_conf 
+{
+   short station;
+   short flags;
+   short kbaud;
+   short clocking;
+   short mtu;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE	0x0000
+#define FRAD_STATION_NODE	0x0001
+
+#define FRAD_TX_IGNORE_CIR	0x0001
+#define FRAD_RX_ACCOUNT_CIR	0x0002
+#define FRAD_DROP_ABORTED	0x0004
+#define FRAD_BUFFERIF		0x0008
+#define FRAD_STATS		0x0010
+#define FRAD_MCI		0x0100
+#define FRAD_AUTODLCI		0x8000
+#define FRAD_VALID_FLAGS	0x811F
+
+#define FRAD_CLOCK_INT		0x0001
+#define FRAD_CLOCK_EXT		0x0000
+
+#ifdef __KERNEL__
+
+/* these are the fields of an RFC 1490 header */
+struct frhdr
+{
+   unsigned char  control	__attribute__((packed));
+
+   /* for IP packets, this can be the NLPID */
+   unsigned char  pad		__attribute__((packed)); 
+
+   unsigned char  NLPID		__attribute__((packed));
+   unsigned char  OUI[3]	__attribute__((packed));
+   unsigned short PID		__attribute__((packed));
+
+#define IP_NLPID pad 
+};
+
+/* see RFC 1490 for the definition of the following */
+#define FRAD_I_UI		0x03
+
+#define FRAD_P_PADDING		0x00
+#define FRAD_P_Q933		0x08
+#define FRAD_P_SNAP		0x80
+#define FRAD_P_CLNP		0x81
+#define FRAD_P_IP		0xCC
+
+struct dlci_local
+{
+   struct net_device_stats stats;
+   struct net_device      *master;
+   struct net_device      *slave;
+   struct dlci_conf       config;
+   int                    configured;
+   struct list_head	  list;
+
+   /* callback function */
+   void              (*receive)(struct sk_buff *skb, struct net_device *);
+};
+
+struct frad_local
+{
+   struct net_device_stats stats;
+
+   /* devices which this FRAD is slaved to */
+   struct net_device     *master[CONFIG_DLCI_MAX];
+   short             dlci[CONFIG_DLCI_MAX];
+
+   struct frad_conf  config;
+   int               configured;	/* has this device been configured */
+   int               initialized;	/* mem_start, port, irq set ? */
+
+   /* callback functions */
+   int               (*activate)(struct net_device *, struct net_device *);
+   int               (*deactivate)(struct net_device *, struct net_device *);
+   int               (*assoc)(struct net_device *, struct net_device *);
+   int               (*deassoc)(struct net_device *, struct net_device *);
+   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
+
+   /* fields that are used by the Sangoma SDLA cards */
+   struct timer_list timer;
+   int               type;		/* adapter type */
+   int               state;		/* state of the S502/8 control latch */
+   int               buffer;		/* current buffer for S508 firmware */
+};
+
+extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
+
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
+
+#endif
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
new file mode 100644
index 000000000000..c8ca72c46f76
--- /dev/null
+++ b/include/linux/if_hippi.h
@@ -0,0 +1,157 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the HIPPI interface.
+ *
+ * Version:	@(#)if_hippi.h	1.0.0	05/26/97
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@redhat.com>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *		Jes Sorensen, <Jes.Sorensen@cern.ch>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+ 
+#ifndef _LINUX_IF_HIPPI_H
+#define _LINUX_IF_HIPPI_H
+
+#include <asm/byteorder.h>
+
+/*
+ *	HIPPI magic constants.
+ */
+
+#define HIPPI_ALEN	6		/* Bytes in one HIPPI hw-addr	   */
+#define HIPPI_HLEN	sizeof(struct hippi_hdr)
+#define HIPPI_ZLEN	0		/* Min. bytes in frame without FCS */
+#define HIPPI_DATA_LEN	65280		/* Max. bytes in payload	   */
+#define HIPPI_FRAME_LEN	(HIPPI_DATA_LEN + HIPPI_HLEN)
+					/* Max. bytes in frame without FCS */
+
+/*
+ * Define LLC and SNAP constants.
+ */
+#define HIPPI_EXTENDED_SAP	0xAA
+#define HIPPI_UI_CMD		0x03
+
+
+/*
+ *	Do we need to list some sort of ID's here?
+ */
+
+/*
+ *	HIPPI statistics collection data. 
+ */
+ 
+struct hipnet_statistics
+{
+	int	rx_packets;		/* total packets received	*/
+	int	tx_packets;		/* total packets transmitted	*/
+	int	rx_errors;		/* bad packets received		*/
+	int	tx_errors;		/* packet transmit problems	*/
+	int	rx_dropped;		/* no space in linux buffers	*/
+	int	tx_dropped;		/* no space available in linux	*/
+
+	/* detailed rx_errors: */
+	int	rx_length_errors;
+	int	rx_over_errors;		/* receiver ring buff overflow	*/
+	int	rx_crc_errors;		/* recved pkt with crc error	*/
+	int	rx_frame_errors;	/* recv'd frame alignment error */
+	int	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	int	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	int	tx_aborted_errors;
+	int	tx_carrier_errors;
+	int	tx_fifo_errors;
+	int	tx_heartbeat_errors;
+	int	tx_window_errors;
+};
+
+
+struct hippi_fp_hdr
+{
+#if 0
+	__u8		ulp;				/* must contain 4 */
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		d1_data_present:1;		/* must be 1 */
+	__u8		start_d2_burst_boundary:1;	/* must be zero */
+	__u8		reserved:6;			/* must be zero */
+#if 0
+	__u16		reserved1:5;
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		d2_offset:3;			/* must be zero */
+#endif
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		reserved:6;			/* must be zero */
+	__u8	 	start_d2_burst_boundary:1;	/* must be zero */
+	__u8		d1_data_present:1;		/* must be 1 */
+#if 0
+	__u16		d2_offset:3;			/* must be zero */
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		reserved1:5;			/* must be zero */
+#endif
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+#else
+	__u32		fixed;
+#endif
+	__u32		d2_size;
+} __attribute__ ((packed));
+
+struct hippi_le_hdr
+{
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		fc:3;
+	__u8		double_wide:1;
+	__u8		message_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		message_type:4;
+	__u8		double_wide:1;
+	__u8		fc:3;
+#endif
+	__u8		dest_switch_addr[3];
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		dest_addr_type:4,
+			src_addr_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		src_addr_type:4,
+			dest_addr_type:4;
+#endif
+	__u8		src_switch_addr[3];
+	__u16		reserved;
+	__u8		daddr[HIPPI_ALEN];
+	__u16		locally_administered;
+	__u8		saddr[HIPPI_ALEN];
+} __attribute__ ((packed));
+
+#define HIPPI_OUI_LEN	3
+/*
+ * Looks like the dsap and ssap fields have been swapped by mistake in
+ * RFC 2067 "IP over HIPPI".
+ */
+struct hippi_snap_hdr
+{
+	__u8	dsap;			/* always 0xAA */
+	__u8	ssap;			/* always 0xAA */
+	__u8	ctrl;			/* always 0x03 */
+	__u8	oui[HIPPI_OUI_LEN];	/* organizational universal id (zero)*/
+	__u16	ethertype;		/* packet type ID field */
+} __attribute__ ((packed));
+
+struct hippi_hdr
+{
+	struct hippi_fp_hdr	fp;
+	struct hippi_le_hdr	le;
+	struct hippi_snap_hdr	snap;
+} __attribute__ ((packed));
+
+#endif	/* _LINUX_IF_HIPPI_H */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
new file mode 100644
index 000000000000..3e659ec7dfdd
--- /dev/null
+++ b/include/linux/if_infiniband.h
@@ -0,0 +1,29 @@
+/*
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available at
+ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
+ * license, available in the LICENSE.TXT file accompanying this
+ * software.  These details are also available at
+ * <http://openib.org/license.html>.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ *
+ * $Id$
+ */
+
+#ifndef _LINUX_IF_INFINIBAND_H
+#define _LINUX_IF_INFINIBAND_H
+
+#define INFINIBAND_ALEN		20	/* Octets in IPoIB HW addr	*/
+
+#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
new file mode 100644
index 000000000000..e75e832b7ff0
--- /dev/null
+++ b/include/linux/if_ltalk.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_LTALK_H
+#define __LINUX_LTALK_H
+
+#define LTALK_HLEN		1
+#define LTALK_MTU		600
+#define LTALK_ALEN		1
+
+#ifdef __KERNEL__
+extern void ltalk_setup(struct net_device *);
+#endif
+
+#endif
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
new file mode 100644
index 000000000000..b92558549d27
--- /dev/null
+++ b/include/linux/if_packet.h
@@ -0,0 +1,102 @@
+#ifndef __LINUX_IF_PACKET_H
+#define __LINUX_IF_PACKET_H
+
+struct sockaddr_pkt
+{
+	unsigned short spkt_family;
+	unsigned char spkt_device[14];
+	unsigned short spkt_protocol;
+};
+
+struct sockaddr_ll
+{
+	unsigned short	sll_family;
+	unsigned short	sll_protocol;
+	int		sll_ifindex;
+	unsigned short	sll_hatype;
+	unsigned char	sll_pkttype;
+	unsigned char	sll_halen;
+	unsigned char	sll_addr[8];
+};
+
+/* Packet types */
+
+#define PACKET_HOST		0		/* To us		*/
+#define PACKET_BROADCAST	1		/* To all		*/
+#define PACKET_MULTICAST	2		/* To group		*/
+#define PACKET_OTHERHOST	3		/* To someone else 	*/
+#define PACKET_OUTGOING		4		/* Outgoing of any type */
+/* These ones are invisible by user level */
+#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
+
+/* Packet socket options */
+
+#define PACKET_ADD_MEMBERSHIP		1
+#define PACKET_DROP_MEMBERSHIP		2
+#define PACKET_RECV_OUTPUT		3
+/* Value 4 is still used by obsolete turbo-packet. */
+#define PACKET_RX_RING			5
+#define PACKET_STATISTICS		6
+#define PACKET_COPY_THRESH		7
+
+struct tpacket_stats
+{
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+};
+
+struct tpacket_hdr
+{
+	unsigned long	tp_status;
+#define TP_STATUS_KERNEL	0
+#define TP_STATUS_USER		1
+#define TP_STATUS_COPY		2
+#define TP_STATUS_LOSING	4
+#define TP_STATUS_CSUMNOTREADY	8
+	unsigned int	tp_len;
+	unsigned int	tp_snaplen;
+	unsigned short	tp_mac;
+	unsigned short	tp_net;
+	unsigned int	tp_sec;
+	unsigned int	tp_usec;
+};
+
+#define TPACKET_ALIGNMENT	16
+#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
+#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
+
+/*
+   Frame structure:
+
+   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+   - struct tpacket_hdr
+   - pad to TPACKET_ALIGNMENT=16
+   - struct sockaddr_ll
+   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
+   - Start+tp_mac: [ Optional MAC header ]
+   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+   - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+struct tpacket_req
+{
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+};
+
+struct packet_mreq
+{
+	int		mr_ifindex;
+	unsigned short	mr_type;
+	unsigned short	mr_alen;
+	unsigned char	mr_address[8];
+};
+
+#define PACKET_MR_MULTICAST	0
+#define PACKET_MR_PROMISC	1
+#define PACKET_MR_ALLMULTI	2
+
+#endif
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
new file mode 100644
index 000000000000..153a649915a2
--- /dev/null
+++ b/include/linux/if_plip.h
@@ -0,0 +1,28 @@
+/*
+ *	NET3	PLIP tuning facilities for the new Niibe PLIP.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+ 
+#ifndef _LINUX_IF_PLIP_H
+#define _LINUX_IF_PLIP_H
+
+#include <linux/sockios.h>
+
+#define	SIOCDEVPLIP	SIOCDEVPRIVATE
+
+struct plipconf
+{
+	unsigned short pcmd;
+	unsigned long  nibble;
+	unsigned long  trigger;
+};
+
+#define PLIP_GET_TIMEOUT	0x1
+#define PLIP_SET_TIMEOUT	0x2
+
+#endif
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
new file mode 100644
index 000000000000..572aff7daa21
--- /dev/null
+++ b/include/linux/if_ppp.h
@@ -0,0 +1,155 @@
+/*	$Id: if_ppp.h,v 1.21 2000/03/27 06:03:36 paulus Exp $	*/
+
+/*
+ * if_ppp.h - Point-to-Point Protocol definitions.
+ *
+ * Copyright (c) 1989 Carnegie Mellon University.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Carnegie Mellon University.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+/*
+ *  ==FILEVERSION 20000724==
+ *
+ *  NOTE TO MAINTAINERS:
+ *     If you modify this file at all, please set the above date.
+ *     if_ppp.h is shipped with a PPP distribution as well as with the kernel;
+ *     if everyone increases the FILEVERSION number above, then scripts
+ *     can do the right thing when deciding whether to install a new if_ppp.h
+ *     file.  Don't change the format of that line otherwise, so the
+ *     installation script can recognize it.
+ */
+
+#ifndef _IF_PPP_H_
+#define _IF_PPP_H_
+
+/*
+ * Packet sizes
+ */
+
+#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
+#define PPP_MAXMRU	65000	/* Largest MRU we allow */
+#define PROTO_IPX	0x002b	/* protocol numbers */
+#define PROTO_DNA_RT    0x0027  /* DNA Routing */
+
+
+/*
+ * Bit definitions for flags.
+ */
+
+#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
+#define SC_COMP_AC	0x00000002	/* header compression (output) */
+#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
+#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
+#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
+#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
+#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
+#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
+#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
+#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
+#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
+#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
+#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
+#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
+#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
+#define SC_DEBUG	0x00010000	/* enable debug messages */
+#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
+#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
+#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
+#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
+#define	SC_SYNC		0x00200000	/* synchronous serial mode */
+#define	SC_MASK		0x0f200fff	/* bits that user can change */
+
+/* state bits */
+#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
+#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
+#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
+#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
+#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
+#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
+#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
+
+/*
+ * Ioctl definitions.
+ */
+
+struct npioctl {
+	int		protocol;	/* PPP protocol, e.g. PPP_IP */
+	enum NPmode	mode;
+};
+
+/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
+struct ppp_option_data {
+	__u8	__user *ptr;
+	__u32	length;
+	int	transmit;
+};
+
+struct ifpppstatsreq {
+	struct ifreq	 b;
+	struct ppp_stats stats;			/* statistic information */
+};
+
+struct ifpppcstatsreq {
+	struct ifreq	      b;
+	struct ppp_comp_stats stats;
+};
+
+#define ifr__name       b.ifr_ifrn.ifrn_name
+#define stats_ptr       b.ifr_ifru.ifru_data
+
+/*
+ * Ioctl definitions.
+ */
+
+#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
+#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
+#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
+#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
+#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
+#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
+#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
+#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
+#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
+#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
+#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
+#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
+#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
+#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
+#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
+#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
+#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
+#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
+#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
+#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
+#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
+#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
+#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
+#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
+#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
+#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
+#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
+#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
+#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
+
+#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
+#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
+#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
+
+#if !defined(ifr_mtu)
+#define ifr_mtu	ifr_ifru.ifru_metric
+#endif
+
+#endif /* _IF_PPP_H_ */
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
new file mode 100644
index 000000000000..e677f73f13dd
--- /dev/null
+++ b/include/linux/if_pppox.h
@@ -0,0 +1,175 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c).  All version information wrt this file is located in pppox.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __LINUX_IF_PPPOX_H
+#define __LINUX_IF_PPPOX_H
+
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+
+#ifdef  __KERNEL__
+#include <linux/if_ether.h>
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <asm/semaphore.h>
+#include <linux/ppp_channel.h>
+#endif /* __KERNEL__ */
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX	24
+#define PF_PPPOX	AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************ 
+ * PPPoE addressing definition 
+ */ 
+typedef __u16 sid_t; 
+struct pppoe_addr{ 
+       sid_t           sid;                    /* Session identifier */ 
+       unsigned char   remote[ETH_ALEN];       /* Remote address */ 
+       char            dev[IFNAMSIZ];          /* Local device to use */ 
+}; 
+ 
+/************************************************************************ 
+ * Protocols supported by AF_PPPOX 
+ */ 
+#define PX_PROTO_OE    0 /* Currently just PPPoE */
+#define PX_MAX_PROTO   1	
+ 
+struct sockaddr_pppox { 
+       sa_family_t     sa_family;            /* address family, AF_PPPOX */ 
+       unsigned int    sa_protocol;          /* protocol identifier */ 
+       union{ 
+               struct pppoe_addr       pppoe; 
+       }sa_addr; 
+}__attribute__ ((packed)); 
+
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD	_IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE	0x09
+#define PADO_CODE	0x07
+#define PADR_CODE	0x19
+#define PADS_CODE	0x65
+#define PADT_CODE	0xa7
+struct pppoe_tag {
+	__u16 tag_type;
+	__u16 tag_len;
+	char tag_data[0];
+} __attribute ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL		__constant_htons(0x0000)
+#define PTT_SRV_NAME	__constant_htons(0x0101)
+#define PTT_AC_NAME	__constant_htons(0x0102)
+#define PTT_HOST_UNIQ	__constant_htons(0x0103)
+#define PTT_AC_COOKIE	__constant_htons(0x0104)
+#define PTT_VENDOR 	__constant_htons(0x0105)
+#define PTT_RELAY_SID	__constant_htons(0x0110)
+#define PTT_SRV_ERR     __constant_htons(0x0201)
+#define PTT_SYS_ERR  	__constant_htons(0x0202)
+#define PTT_GEN_ERR  	__constant_htons(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ver : 4;
+	__u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type : 4;
+	__u8 ver : 4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8 code;
+	__u16 sid;
+	__u16 length;
+	struct pppoe_tag tag[0];
+} __attribute__ ((packed));
+
+#ifdef __KERNEL__
+struct pppoe_opt {
+	struct net_device      *dev;	  /* device associated with socket*/
+	struct pppoe_addr	pa;	  /* what this socket is bound to*/
+	struct sockaddr_pppox	relay;	  /* what socket data will be
+					     relayed to (PPPoE relaying) */
+};
+
+#include <net/sock.h>
+
+struct pppox_sock {
+	/* struct sock must be the first member of pppox_sock */
+	struct sock		sk;
+	struct ppp_channel	chan;
+	struct pppox_sock	*next;	  /* for hash table */
+	union {
+		struct pppoe_opt pppoe;
+	} proto;
+	unsigned short		num;
+};
+#define pppoe_dev	proto.pppoe.dev
+#define pppoe_pa	proto.pppoe.pa
+#define pppoe_relay	proto.pppoe.relay
+
+static inline struct pppox_sock *pppox_sk(struct sock *sk)
+{
+	return (struct pppox_sock *)sk;
+}
+
+static inline struct sock *sk_pppox(struct pppox_sock *po)
+{
+	return (struct sock *)po;
+}
+
+struct module;
+
+struct pppox_proto {
+	int		(*create)(struct socket *sock);
+	int		(*ioctl)(struct socket *sock, unsigned int cmd,
+				 unsigned long arg);
+	struct module	*owner;
+};
+
+extern int register_pppox_proto(int proto_num, struct pppox_proto *pp);
+extern void unregister_pppox_proto(int proto_num);
+extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */
+extern int pppox_channel_ioctl(struct ppp_channel *pc, unsigned int cmd,
+			       unsigned long arg);
+
+/* PPPoX socket states */
+enum {
+    PPPOX_NONE		= 0,  /* initial state */
+    PPPOX_CONNECTED	= 1,  /* connection established ==TCP_ESTABLISHED */
+    PPPOX_BOUND		= 2,  /* bound to ppp device */
+    PPPOX_RELAY		= 4,  /* forwarding is enabled */
+    PPPOX_ZOMBIE	= 8,  /* dead, but still bound to ppp device */
+    PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
new file mode 100644
index 000000000000..0485b256d043
--- /dev/null
+++ b/include/linux/if_shaper.h
@@ -0,0 +1,64 @@
+#ifndef __LINUX_SHAPER_H
+#define __LINUX_SHAPER_H
+
+#ifdef __KERNEL__
+
+#define SHAPER_QLEN	10
+/*
+ *	This is a bit speed dependent (read it shouldn't be a constant!)
+ *
+ *	5 is about right for 28.8 upwards. Below that double for every
+ *	halving of speed or so. - ie about 20 for 9600 baud.
+ */
+#define SHAPER_LATENCY	(5*HZ)
+#define SHAPER_MAXSLIP	2
+#define SHAPER_BURST	(HZ/50)		/* Good for >128K then */
+
+struct shaper
+{
+	struct sk_buff_head sendq;
+	__u32 bytespertick;
+	__u32 bitspersec;
+	__u32 shapelatency;
+	__u32 shapeclock;
+	unsigned long recovery;	/* Time we can next clock a packet out on
+				   an empty queue */
+        unsigned long locked;
+        struct net_device_stats stats;
+	struct net_device *dev;
+	int  (*hard_start_xmit) (struct sk_buff *skb,
+		struct net_device *dev);
+	int  (*hard_header) (struct sk_buff *skb,
+		struct net_device *dev,
+		unsigned short type,
+		void *daddr,
+		void *saddr,
+		unsigned len);
+	int  (*rebuild_header)(struct sk_buff *skb);
+	int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
+	void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char *  haddr);
+	struct net_device_stats* (*get_stats)(struct net_device *dev);
+	wait_queue_head_t  wait_queue;
+	struct timer_list timer;
+};
+
+#endif
+
+#define SHAPER_SET_DEV		0x0001
+#define SHAPER_SET_SPEED	0x0002
+#define SHAPER_GET_DEV		0x0003
+#define SHAPER_GET_SPEED	0x0004
+
+struct shaperconf
+{
+	__u16	ss_cmd;
+	union
+	{
+		char 	ssu_name[14];
+		__u32	ssu_speed;
+	} ss_u;
+#define ss_speed ss_u.ssu_speed
+#define ss_name ss_u.ssu_name
+};
+
+#endif
diff --git a/include/linux/if_slip.h b/include/linux/if_slip.h
new file mode 100644
index 000000000000..1eb4e3a8397a
--- /dev/null
+++ b/include/linux/if_slip.h
@@ -0,0 +1,30 @@
+/*
+ *	Swansea University Computer Society	NET3
+ *	
+ *	This file declares the constants of special use with the SLIP/CSLIP/
+ *	KISS TNC driver.
+ */
+ 
+#ifndef __LINUX_SLIP_H
+#define __LINUX_SLIP_H
+
+#define		SL_MODE_SLIP		0
+#define		SL_MODE_CSLIP		1
+#define 	SL_MODE_KISS		4
+
+#define		SL_OPT_SIXBIT		2
+#define		SL_OPT_ADAPTIVE		8
+
+/*
+ *	VSV = ioctl for keepalive & outfill in SLIP driver 
+ */
+ 
+#define SIOCSKEEPALIVE	(SIOCDEVPRIVATE)		/* Set keepalive timeout in sec */
+#define SIOCGKEEPALIVE	(SIOCDEVPRIVATE+1)		/* Get keepalive timeout */
+#define SIOCSOUTFILL	(SIOCDEVPRIVATE+2)		/* Set outfill timeout */
+#define	SIOCGOUTFILL	(SIOCDEVPRIVATE+3)		/* Get outfill timeout */
+#define SIOCSLEASE	(SIOCDEVPRIVATE+4)		/* Set "leased" line type */
+#define	SIOCGLEASE	(SIOCDEVPRIVATE+5)		/* Get line type */
+
+
+#endif
diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h
new file mode 100644
index 000000000000..fb5c5c98442f
--- /dev/null
+++ b/include/linux/if_strip.h
@@ -0,0 +1,25 @@
+/*
+ * if_strip.h --
+ *
+ *      Definitions for the STRIP interface
+ *
+ * Copyright 1996 The Board of Trustees of The Leland Stanford
+ * Junior University. All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies.  Stanford University
+ * makes no representations about the suitability of this
+ * software for any purpose.  It is provided "as is" without
+ * express or implied warranty.
+ */
+
+#ifndef __LINUX_STRIP_H
+#define __LINUX_STRIP_H
+
+typedef struct {
+    __u8 c[6];
+} MetricomAddress;
+
+#endif
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
new file mode 100644
index 000000000000..4fd451f81ccb
--- /dev/null
+++ b/include/linux/if_tr.h
@@ -0,0 +1,109 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Token-Ring IEEE 802.5 interface.
+ *
+ * Version:	@(#)if_tr.h	0.0	07/11/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_TR_H
+#define _LINUX_IF_TR_H
+
+
+/* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
+   and FCS/CRC (frame check sequence). */
+#define TR_ALEN	6		/* Octets in one ethernet addr	 */
+#define TR_HLEN   (sizeof(struct trh_hdr)+sizeof(struct trllc))
+#define AC			0x10
+#define LLC_FRAME 0x40
+#if 0
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+#endif
+
+
+/* LLC and SNAP constants */
+#define EXTENDED_SAP 0xAA
+#define UI_CMD       0x03
+
+/* This is an Token-Ring frame header. */
+struct trh_hdr {
+	__u8  ac;			/* access control field */
+	__u8  fc;			/* frame control field */
+	__u8  daddr[TR_ALEN];		/* destination address */
+	__u8  saddr[TR_ALEN];		/* source address */
+	__u16 rcf;			/* route control field */
+	__u16 rseg[8];			/* routing registers */
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct trh_hdr *tr_hdr(const struct sk_buff *skb)
+{
+	return (struct trh_hdr *)skb->mac.raw;
+}
+#endif
+
+/* This is an Token-Ring LLC structure */
+struct trllc {
+	__u8  dsap;			/* destination SAP */
+	__u8  ssap;			/* source SAP */
+	__u8  llc;			/* LLC control field */
+	__u8  protid[3];		/* protocol id */
+	__u16 ethertype;		/* ether type field */
+};
+
+/* Token-Ring statistics collection data. */
+struct tr_statistics {
+	unsigned long rx_packets;       /* total packets received	*/
+	unsigned long tx_packets;	/* total packets transmitted	*/
+	unsigned long rx_bytes;		/* total bytes received   	*/
+	unsigned long tx_bytes;		/* total bytes transmitted	*/
+	unsigned long rx_errors;	/* bad packets received		*/
+	unsigned long tx_errors;	/* packet transmit problems	*/
+	unsigned long rx_dropped;	/* no space in linux buffers	*/
+	unsigned long tx_dropped;	/* no space available in linux	*/
+	unsigned long multicast;	/* multicast packets received	*/
+	unsigned long transmit_collision;
+
+	/* detailed Token-Ring errors. See IBM Token-Ring Network
+	   Architecture for more info */
+
+	unsigned long line_errors;
+	unsigned long internal_errors;
+	unsigned long burst_errors;
+	unsigned long A_C_errors;
+	unsigned long abort_delimiters;
+	unsigned long lost_frames;
+	unsigned long recv_congest_count;
+	unsigned long frame_copied_errors;
+	unsigned long frequency_errors;
+	unsigned long token_errors;
+	unsigned long dummy1;
+};
+
+/* source routing stuff */
+
+#define TR_RII 0x80
+#define TR_RCF_DIR_BIT 0x80
+#define TR_RCF_LEN_MASK 0x1f00
+#define TR_RCF_BROADCAST 0x8000         /* all-routes broadcast */
+#define TR_RCF_LIMITED_BROADCAST 0xC000 /* single-route broadcast */
+#define TR_RCF_FRAME2K 0x20
+#define TR_RCF_BROADCAST_MASK 0xC000
+#define TR_MAXRIFLEN 18
+
+#endif	/* _LINUX_IF_TR_H */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
new file mode 100644
index 000000000000..096a85a58ae5
--- /dev/null
+++ b/include/linux/if_tun.h
@@ -0,0 +1,93 @@
+/*
+ *  Universal TUN/TAP device driver.
+ *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  $Id: if_tun.h,v 1.2 2001/06/01 18:39:47 davem Exp $
+ */
+
+#ifndef __IF_TUN_H
+#define __IF_TUN_H
+
+/* Uncomment to enable debugging */
+/* #define TUN_DEBUG 1 */
+
+#ifdef __KERNEL__
+
+#ifdef TUN_DEBUG
+#define DBG  if(tun->debug)printk
+#define DBG1 if(debug==2)printk
+#else
+#define DBG( a... )
+#define DBG1( a... )
+#endif
+
+struct tun_struct {
+	struct list_head        list;
+	unsigned long 		flags;
+	int			attached;
+	uid_t			owner;
+
+	wait_queue_head_t	read_wait;
+	struct sk_buff_head	readq;
+
+	struct net_device	*dev;
+	struct net_device_stats	stats;
+
+	struct fasync_struct    *fasync;
+
+	unsigned long if_flags;
+	u8 dev_addr[ETH_ALEN];
+	u32 chr_filter[2];
+	u32 net_filter[2];
+
+#ifdef TUN_DEBUG	
+	int debug;
+#endif  
+};
+
+#endif /* __KERNEL__ */
+
+/* Read queue size */
+#define TUN_READQ_SIZE	500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 	0x0001	
+#define TUN_TAP_DEV	0x0002
+#define TUN_TYPE_MASK   0x000f
+
+#define TUN_FASYNC	0x0010
+#define TUN_NOCHECKSUM	0x0020
+#define TUN_NO_PI	0x0040
+#define TUN_ONE_QUEUE	0x0080
+#define TUN_PERSIST 	0x0100	
+
+/* Ioctl defines */
+#define TUNSETNOCSUM  _IOW('T', 200, int) 
+#define TUNSETDEBUG   _IOW('T', 201, int) 
+#define TUNSETIFF     _IOW('T', 202, int) 
+#define TUNSETPERSIST _IOW('T', 203, int) 
+#define TUNSETOWNER   _IOW('T', 204, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN		0x0001
+#define IFF_TAP		0x0002
+#define IFF_NO_PI	0x1000
+#define IFF_ONE_QUEUE	0x2000
+
+struct tun_pi {
+	unsigned short flags;
+	unsigned short proto;
+};
+#define TUN_PKT_STRIP	0x0001
+
+#endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
new file mode 100644
index 000000000000..bef9f8fd93b3
--- /dev/null
+++ b/include/linux/if_tunnel.h
@@ -0,0 +1,29 @@
+#ifndef _IF_TUNNEL_H_
+#define _IF_TUNNEL_H_
+
+#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
+
+#define GRE_CSUM	__constant_htons(0x8000)
+#define GRE_ROUTING	__constant_htons(0x4000)
+#define GRE_KEY		__constant_htons(0x2000)
+#define GRE_SEQ		__constant_htons(0x1000)
+#define GRE_STRICT	__constant_htons(0x0800)
+#define GRE_REC		__constant_htons(0x0700)
+#define GRE_FLAGS	__constant_htons(0x00F8)
+#define GRE_VERSION	__constant_htons(0x0007)
+
+struct ip_tunnel_parm
+{
+	char			name[IFNAMSIZ];
+	int			link;
+	__u16			i_flags;
+	__u16			o_flags;
+	__u32			i_key;
+	__u32			o_key;
+	struct iphdr		iph;
+};
+
+#endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
new file mode 100644
index 000000000000..62a9d89dfbe2
--- /dev/null
+++ b/include/linux/if_vlan.h
@@ -0,0 +1,398 @@
+/*
+ * VLAN		An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _LINUX_IF_VLAN_H_
+#define _LINUX_IF_VLAN_H_
+
+#ifdef __KERNEL__
+
+/* externally defined structs */
+struct vlan_group;
+struct net_device;
+struct packet_type;
+struct vlan_collection;
+struct vlan_dev_info;
+struct hlist_node;
+
+#include <linux/proc_fs.h> /* for proc_dir_entry */
+#include <linux/netdevice.h>
+
+#define VLAN_HLEN	4		/* The additional bytes (on top of the Ethernet header)
+					 * that VLAN requires.
+					 */
+#define VLAN_ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define VLAN_ETH_HLEN	18		/* Total octets in header.	 */
+#define VLAN_ETH_ZLEN	64		/* Min. octets in frame sans FCS */
+
+/*
+ * According to 802.3ac, the packet can be 4 bytes longer. --Klika Jan
+ */
+#define VLAN_ETH_DATA_LEN	1500	/* Max. octets in payload	 */
+#define VLAN_ETH_FRAME_LEN	1518	/* Max. octets in frame sans FCS */
+
+struct vlan_ethhdr {
+   unsigned char	h_dest[ETH_ALEN];	   /* destination eth addr	*/
+   unsigned char	h_source[ETH_ALEN];	   /* source ether addr	*/
+   unsigned short       h_vlan_proto;              /* Should always be 0x8100 */
+   unsigned short       h_vlan_TCI;                /* Encapsulates priority and VLAN ID */
+   unsigned short	h_vlan_encapsulated_proto; /* packet type ID field (or len) */
+};
+
+#include <linux/skbuff.h>
+
+static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb)
+{
+	return (struct vlan_ethhdr *)skb->mac.raw;
+}
+
+struct vlan_hdr {
+   unsigned short       h_vlan_TCI;                /* Encapsulates priority and VLAN ID */
+   unsigned short       h_vlan_encapsulated_proto; /* packet type ID field (or len) */
+};
+
+#define VLAN_VID_MASK	0xfff
+
+/* found in socket.c */
+extern void vlan_ioctl_set(int (*hook)(void __user *));
+
+#define VLAN_NAME "vlan"
+
+/* if this changes, algorithm will have to be reworked because this
+ * depends on completely exhausting the VLAN identifier space.  Thus
+ * it gives constant time look-up, but in many cases it wastes memory.
+ */
+#define VLAN_GROUP_ARRAY_LEN 4096
+
+struct vlan_group {
+	int real_dev_ifindex; /* The ifindex of the ethernet(like) device the vlan is attached to. */
+	struct hlist_node	hlist;	/* linked list */
+	struct net_device *vlan_devices[VLAN_GROUP_ARRAY_LEN];
+	struct rcu_head		rcu;
+};
+
+struct vlan_priority_tci_mapping {
+	unsigned long priority;
+	unsigned short vlan_qos; /* This should be shifted when first set, so we only do it
+				  * at provisioning time.
+				  * ((skb->priority << 13) & 0xE000)
+				  */
+	struct vlan_priority_tci_mapping *next;
+};
+
+/* Holds information that makes sense if this device is a VLAN device. */
+struct vlan_dev_info {
+	/** This will be the mapping that correlates skb->priority to
+	 * 3 bits of VLAN QOS tags...
+	 */
+	unsigned long ingress_priority_map[8];
+	struct vlan_priority_tci_mapping *egress_priority_map[16]; /* hash table */
+
+	unsigned short vlan_id;        /*  The VLAN Identifier for this interface. */
+	unsigned short flags;          /* (1 << 0) re_order_header   This option will cause the
+                                        *   VLAN code to move around the ethernet header on
+                                        *   ingress to make the skb look **exactly** like it
+                                        *   came in from an ethernet port.  This destroys some of
+                                        *   the VLAN information in the skb, but it fixes programs
+                                        *   like DHCP that use packet-filtering and don't understand
+                                        *   802.1Q
+                                        */
+	struct dev_mc_list *old_mc_list;  /* old multi-cast list for the VLAN interface..
+                                           * we save this so we can tell what changes were
+                                           * made, in order to feed the right changes down
+                                           * to the real hardware...
+                                           */
+	int old_allmulti;               /* similar to above. */
+	int old_promiscuity;            /* similar to above. */
+	struct net_device *real_dev;    /* the underlying device/interface */
+	struct proc_dir_entry *dent;    /* Holds the proc data */
+	unsigned long cnt_inc_headroom_on_tx; /* How many times did we have to grow the skb on TX. */
+	unsigned long cnt_encap_on_xmit;      /* How many times did we have to encapsulate the skb on TX. */
+	struct net_device_stats dev_stats; /* Device stats (rx-bytes, tx-pkts, etc...) */
+};
+
+#define VLAN_DEV_INFO(x) ((struct vlan_dev_info *)(x->priv))
+
+/* inline functions */
+
+static inline struct net_device_stats *vlan_dev_get_stats(struct net_device *dev)
+{
+	return &(VLAN_DEV_INFO(dev)->dev_stats);
+}
+
+static inline __u32 vlan_get_ingress_priority(struct net_device *dev,
+					      unsigned short vlan_tag)
+{
+	struct vlan_dev_info *vip = VLAN_DEV_INFO(dev);
+
+	return vip->ingress_priority_map[(vlan_tag >> 13) & 0x7];
+}
+
+/* VLAN tx hw acceleration helpers. */
+struct vlan_skb_tx_cookie {
+	u32	magic;
+	u32	vlan_tag;
+};
+
+#define VLAN_TX_COOKIE_MAGIC	0x564c414e	/* "VLAN" in ascii. */
+#define VLAN_TX_SKB_CB(__skb)	((struct vlan_skb_tx_cookie *)&((__skb)->cb[0]))
+#define vlan_tx_tag_present(__skb) \
+	(VLAN_TX_SKB_CB(__skb)->magic == VLAN_TX_COOKIE_MAGIC)
+#define vlan_tx_tag_get(__skb)	(VLAN_TX_SKB_CB(__skb)->vlan_tag)
+
+/* VLAN rx hw acceleration helper.  This acts like netif_{rx,receive_skb}(). */
+static inline int __vlan_hwaccel_rx(struct sk_buff *skb,
+				    struct vlan_group *grp,
+				    unsigned short vlan_tag, int polling)
+{
+	struct net_device_stats *stats;
+
+	skb->real_dev = skb->dev;
+	skb->dev = grp->vlan_devices[vlan_tag & VLAN_VID_MASK];
+	if (skb->dev == NULL) {
+		dev_kfree_skb_any(skb);
+
+		/* Not NET_RX_DROP, this is not being dropped
+		 * due to congestion.
+		 */
+		return 0;
+	}
+
+	skb->dev->last_rx = jiffies;
+
+	stats = vlan_dev_get_stats(skb->dev);
+	stats->rx_packets++;
+	stats->rx_bytes += skb->len;
+
+	skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tag);
+	switch (skb->pkt_type) {
+	case PACKET_BROADCAST:
+		break;
+
+	case PACKET_MULTICAST:
+		stats->multicast++;
+		break;
+
+	case PACKET_OTHERHOST:
+		/* Our lower layer thinks this is not local, let's make sure.
+		 * This allows the VLAN to have a different MAC than the underlying
+		 * device, and still route correctly.
+		 */
+		if (!memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN))
+			skb->pkt_type = PACKET_HOST;
+		break;
+	};
+
+	return (polling ? netif_receive_skb(skb) : netif_rx(skb));
+}
+
+static inline int vlan_hwaccel_rx(struct sk_buff *skb,
+				  struct vlan_group *grp,
+				  unsigned short vlan_tag)
+{
+	return __vlan_hwaccel_rx(skb, grp, vlan_tag, 0);
+}
+
+static inline int vlan_hwaccel_receive_skb(struct sk_buff *skb,
+					   struct vlan_group *grp,
+					   unsigned short vlan_tag)
+{
+	return __vlan_hwaccel_rx(skb, grp, vlan_tag, 1);
+}
+
+/**
+ * __vlan_put_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @tag: VLAN tag to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ * 
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ */
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, unsigned short tag)
+{
+	struct vlan_ethhdr *veth;
+
+	if (skb_headroom(skb) < VLAN_HLEN) {
+		struct sk_buff *sk_tmp = skb;
+		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
+		kfree_skb(sk_tmp);
+		if (!skb) {
+			printk(KERN_ERR "vlan: failed to realloc headroom\n");
+			return NULL;
+		}
+	} else {
+		skb = skb_unshare(skb, GFP_ATOMIC);
+		if (!skb) {
+			printk(KERN_ERR "vlan: failed to unshare skbuff\n");
+			return NULL;
+		}
+	}
+
+	veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
+
+	/* Move the mac addresses to the beginning of the new header. */
+	memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN);
+
+	/* first, the ethernet type */
+	veth->h_vlan_proto = __constant_htons(ETH_P_8021Q);
+
+	/* now, the tag */
+	veth->h_vlan_TCI = htons(tag);
+
+	skb->protocol = __constant_htons(ETH_P_8021Q);
+	skb->mac.raw -= VLAN_HLEN;
+	skb->nh.raw -= VLAN_HLEN;
+
+	return skb;
+}
+
+/**
+ * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting
+ * @skb: skbuff to tag
+ * @tag: VLAN tag to insert
+ *
+ * Puts the VLAN tag in @skb->cb[] and lets the device do the rest
+ */
+static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb, unsigned short tag)
+{
+	struct vlan_skb_tx_cookie *cookie;
+
+	cookie = VLAN_TX_SKB_CB(skb);
+	cookie->magic = VLAN_TX_COOKIE_MAGIC;
+	cookie->vlan_tag = tag;
+
+	return skb;
+}
+
+#define HAVE_VLAN_PUT_TAG
+
+/**
+ * vlan_put_tag - inserts VLAN tag according to device features
+ * @skb: skbuff to tag
+ * @tag: VLAN tag to insert
+ *
+ * Assumes skb->dev is the target that will xmit this frame.
+ * Returns a VLAN tagged skb.
+ */
+static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, unsigned short tag)
+{
+	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
+		return __vlan_hwaccel_put_tag(skb, tag);
+	} else {
+		return __vlan_put_tag(skb, tag);
+	}
+}
+
+/**
+ * __vlan_get_tag - get the VLAN ID that is part of the payload
+ * @skb: skbuff to query
+ * @tag: buffer to store vlaue
+ * 
+ * Returns error if the skb is not of VLAN type
+ */
+static inline int __vlan_get_tag(struct sk_buff *skb, unsigned short *tag)
+{
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data;
+
+	if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) {
+		return -EINVAL;
+	}
+
+	*tag = ntohs(veth->h_vlan_TCI);
+
+	return 0;
+}
+
+/**
+ * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[]
+ * @skb: skbuff to query
+ * @tag: buffer to store vlaue
+ * 
+ * Returns error if @skb->cb[] is not set correctly
+ */
+static inline int __vlan_hwaccel_get_tag(struct sk_buff *skb, unsigned short *tag)
+{
+	struct vlan_skb_tx_cookie *cookie;
+
+	cookie = VLAN_TX_SKB_CB(skb);
+	if (cookie->magic == VLAN_TX_COOKIE_MAGIC) {
+		*tag = cookie->vlan_tag;
+		return 0;
+	} else {
+		*tag = 0;
+		return -EINVAL;
+	}
+}
+
+#define HAVE_VLAN_GET_TAG
+
+/**
+ * vlan_get_tag - get the VLAN ID from the skb
+ * @skb: skbuff to query
+ * @tag: buffer to store vlaue
+ * 
+ * Returns error if the skb is not VLAN tagged
+ */
+static inline int vlan_get_tag(struct sk_buff *skb, unsigned short *tag)
+{
+	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
+		return __vlan_hwaccel_get_tag(skb, tag);
+	} else {
+		return __vlan_get_tag(skb, tag);
+	}
+}
+
+#endif /* __KERNEL__ */
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+	ADD_VLAN_CMD,
+	DEL_VLAN_CMD,
+	SET_VLAN_INGRESS_PRIORITY_CMD,
+	SET_VLAN_EGRESS_PRIORITY_CMD,
+	GET_VLAN_INGRESS_PRIORITY_CMD,
+	GET_VLAN_EGRESS_PRIORITY_CMD,
+	SET_VLAN_NAME_TYPE_CMD,
+	SET_VLAN_FLAG_CMD,
+	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_name_types {
+	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
+	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
+	VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+	char device1[24];
+
+        union {
+		char device2[24];
+		int VID;
+		unsigned int skb_priority;
+		unsigned int name_type;
+		unsigned int bind_type;
+		unsigned int flag; /* Matches vlan_dev_info flags */
+        } u;
+
+	short vlan_qos;   
+};
+
+#endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/if_wanpipe.h b/include/linux/if_wanpipe.h
new file mode 100644
index 000000000000..e594ca6069e5
--- /dev/null
+++ b/include/linux/if_wanpipe.h
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* if_wanpipe.h	Header file for the Sangoma AF_WANPIPE Socket 	
+*
+* Author: 	Nenad Corbic 	
+*
+* Copyright:	(c) 2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+*
+* Jan 28, 2000	Nenad Corbic 	Initial Version
+*
+*****************************************************************************/
+
+#ifndef __LINUX_IF_WAN_PACKET_H
+#define __LINUX_IF_WAN_PACKET_H
+
+struct wan_sockaddr_ll
+{
+	unsigned short	sll_family;
+	unsigned short	sll_protocol;
+	int		sll_ifindex;
+	unsigned short	sll_hatype;
+	unsigned char	sll_pkttype;
+	unsigned char	sll_halen;
+	unsigned char	sll_addr[8];
+	unsigned char   sll_device[14];
+	unsigned char 	sll_card[14];
+};
+
+typedef struct 
+{
+	unsigned char free;
+	unsigned char state_sk;
+	int rcvbuf;
+	int sndbuf;
+	int rmem;
+	int wmem;
+	int sk_count;
+	unsigned char bound;
+	char name[14];
+	unsigned char d_state;
+	unsigned char svc;
+	unsigned short lcn;
+	unsigned char mbox;
+	unsigned char cmd_busy;
+	unsigned char command;
+	unsigned poll;
+	unsigned poll_cnt;
+	int rblock;	
+} wan_debug_hdr_t;
+
+#define MAX_NUM_DEBUG  10
+#define X25_PROT       0x16
+#define PVC_PROT       0x17	
+
+typedef struct
+{
+	wan_debug_hdr_t debug[MAX_NUM_DEBUG];
+}wan_debug_t;
+
+#define	SIOC_WANPIPE_GET_CALL_DATA	(SIOCPROTOPRIVATE + 0)
+#define	SIOC_WANPIPE_SET_CALL_DATA	(SIOCPROTOPRIVATE + 1)
+#define SIOC_WANPIPE_ACCEPT_CALL	(SIOCPROTOPRIVATE + 2)
+#define SIOC_WANPIPE_CLEAR_CALL	        (SIOCPROTOPRIVATE + 3)
+#define SIOC_WANPIPE_RESET_CALL	        (SIOCPROTOPRIVATE + 4)
+#define SIOC_WANPIPE_DEBUG	        (SIOCPROTOPRIVATE + 5)
+#define SIOC_WANPIPE_SET_NONBLOCK	(SIOCPROTOPRIVATE + 6)
+#define SIOC_WANPIPE_CHECK_TX		(SIOCPROTOPRIVATE + 7)
+#define SIOC_WANPIPE_SOCK_STATE		(SIOCPROTOPRIVATE + 8)
+
+/* Packet types */
+
+#define WAN_PACKET_HOST		0		/* To us		*/
+#define WAN_PACKET_BROADCAST	1		/* To all		*/
+#define WAN_PACKET_MULTICAST	2		/* To group		*/
+#define WAN_PACKET_OTHERHOST	3		/* To someone else 	*/
+#define WAN_PACKET_OUTGOING		4		/* Outgoing of any type */
+/* These ones are invisible by user level */
+#define WAN_PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+#define WAN_PACKET_FASTROUTE	6		/* Fastrouted frame	*/
+
+
+/* X25 specific */
+#define WAN_PACKET_DATA 	7
+#define WAN_PACKET_CMD 		8
+#define WAN_PACKET_ASYNC	9
+#define WAN_PACKET_ERR	       10
+
+/* Packet socket options */
+
+#define WAN_PACKET_ADD_MEMBERSHIP		1
+#define WAN_PACKET_DROP_MEMBERSHIP		2
+
+#define WAN_PACKET_MR_MULTICAST	0
+#define WAN_PACKET_MR_PROMISC	1
+#define WAN_PACKET_MR_ALLMULTI	2
+
+#ifdef __KERNEL__
+
+/* Private wanpipe socket structures. */
+struct wanpipe_opt
+{
+	void   *mbox;		/* Mail box  */
+	void   *card; 		/* Card bouded to */
+	struct net_device *dev;	/* Bounded device */
+	unsigned short lcn;	/* Binded LCN */
+	unsigned char  svc;	/* 0=pvc, 1=svc */
+	unsigned char  timer;   /* flag for delayed transmit*/	
+	struct timer_list tx_timer;
+	unsigned poll_cnt;
+	unsigned char force;	/* Used to force sock release */
+	atomic_t packet_sent;   
+	unsigned short num; 
+};
+
+#define wp_sk(__sk) ((struct wanpipe_opt *)(__sk)->sk_protinfo)
+
+#endif
+
+#endif
diff --git a/include/linux/if_wanpipe_common.h b/include/linux/if_wanpipe_common.h
new file mode 100644
index 000000000000..f25fec8ee2ca
--- /dev/null
+++ b/include/linux/if_wanpipe_common.h
@@ -0,0 +1,60 @@
+/*****************************************************************************
+* if_wanipe_common.h   Sangoma Driver/Socket common area definitions.
+*
+* Author:       Nenad Corbic <ncorbic@sangoma.com>
+*
+* Copyright:    (c) 2000 Sangoma Technologies Inc.
+*
+*               This program is free software; you can redistribute it and/or
+*               modify it under the terms of the GNU General Public License
+*               as published by the Free Software Foundation; either version
+*               2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jan 13, 2000  Nenad Corbic      Initial version
+*****************************************************************************/
+
+
+#ifndef _WANPIPE_SOCK_DRIVER_COMMON_H
+#define _WANPIPE_SOCK_DRIVER_COMMON_H
+
+#include <linux/version.h>
+
+typedef struct {
+	struct net_device *slave;
+	atomic_t packet_sent;
+	atomic_t receive_block;
+	atomic_t command;
+	atomic_t disconnect;
+	atomic_t driver_busy;
+	long common_critical;
+	struct timer_list *tx_timer;
+	struct sock *sk;		/* Wanpipe Sock bind's here */ 
+	int (*func)(struct sk_buff *skb, struct net_device *dev, 
+		    struct sock *sk);
+
+	struct work_struct wanpipe_work;    /* deferred keventd work */
+	unsigned char rw_bind;			  /* Sock bind state */
+	unsigned char usedby;
+	unsigned char state;
+	unsigned char svc;
+	unsigned short lcn;
+	void *mbox;
+} wanpipe_common_t;
+
+
+enum {
+	WANSOCK_UNCONFIGURED,	/* link/channel is not configured */
+	WANSOCK_DISCONNECTED,	/* link/channel is disconnected */
+	WANSOCK_CONNECTING,		/* connection is in progress */
+	WANSOCK_CONNECTED,		/* link/channel is operational */
+	WANSOCK_LIMIT,		/* for verification only */
+	WANSOCK_DUALPORT,		/* for Dual Port cards */
+	WANSOCK_DISCONNECTING,
+	WANSOCK_BINDED,
+	WANSOCK_BIND_LISTEN,
+	WANSOCK_LISTEN
+};
+
+#endif
+
+
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
new file mode 100644
index 000000000000..390e760a96d3
--- /dev/null
+++ b/include/linux/igmp.h
@@ -0,0 +1,219 @@
+/*
+ *	Linux NET3:	Internet Group Management Protocol  [IGMP]
+ *
+ *	Authors:
+ *		Alan Cox <Alan.Cox@linux.org>
+ *
+ *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IGMP_H
+#define _LINUX_IGMP_H
+
+#include <asm/byteorder.h>
+
+/*
+ *	IGMP protocol structures
+ */
+
+/*
+ *	Header in on cable format
+ */
+
+struct igmphdr
+{
+	__u8 type;
+	__u8 code;		/* For newer IGMP */
+	__u16 csum;
+	__u32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE		1
+#define IGMPV3_MODE_IS_EXCLUDE		2
+#define IGMPV3_CHANGE_TO_INCLUDE	3
+#define IGMPV3_CHANGE_TO_EXCLUDE	4
+#define IGMPV3_ALLOW_NEW_SOURCES	5
+#define IGMPV3_BLOCK_OLD_SOURCES	6
+
+struct igmpv3_grec {
+	__u8	grec_type;
+	__u8	grec_auxwords;
+	__u16	grec_nsrcs;
+	__u32	grec_mca;
+	__u32	grec_src[0];
+};
+
+struct igmpv3_report {
+	__u8 type;
+	__u8 resv1;
+	__u16 csum;
+	__u16 resv2;
+	__u16 ngrec;
+	struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+	__u8 type;
+	__u8 code;
+	__u16 csum;
+	__u32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 qrv:3,
+	     suppress:1,
+	     resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 resv:4,
+	     suppress:1,
+	     qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 qqic;
+	__u16 nsrcs;
+	__u32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+#define IGMP_DVMRP			0x13	/* DVMRP routing */
+#define IGMP_PIM			0x14	/* PIM routing */
+#define IGMP_TRACE			0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x11 */
+#define IGMP_HOST_LEAVE_MESSAGE 	0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x11 */
+
+#define IGMP_MTRACE_RESP		0x1e
+#define IGMP_MTRACE			0x1f
+
+
+/*
+ *	Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER		0x01
+#define IGMP_IDLE_MEMBER		0x02
+#define IGMP_LAZY_MEMBER		0x03
+#define IGMP_SLEEPING_MEMBER		0x04
+#define IGMP_AWAKENING_MEMBER		0x05
+
+#define IGMP_MINLEN			8
+
+#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
+						/* query (in seconds)	*/
+
+#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
+						/* specifies time in 10th of seconds	 */
+
+#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
+						/* message in this period of time,	*/
+						/* revert to IGMP v2 router.		*/
+
+#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+#include <linux/in.h>
+
+struct ip_sf_socklist
+{
+	unsigned int		sl_max;
+	unsigned int		sl_count;
+	__u32			sl_addr[0];
+};
+
+#define IP_SFLSIZE(count)	(sizeof(struct ip_sf_socklist) + \
+	(count) * sizeof(__u32))
+
+#define IP_SFBLOCK	10	/* allocate this many at once */
+
+/* ip_mc_socklist is real list now. Speed is not argument;
+   this list never used in fast path code
+ */
+
+struct ip_mc_socklist
+{
+	struct ip_mc_socklist	*next;
+	int			count;
+	struct ip_mreqn		multi;
+	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
+	struct ip_sf_socklist	*sflist;
+};
+
+struct ip_sf_list
+{
+	struct ip_sf_list	*sf_next;
+	__u32			sf_inaddr;
+	unsigned long		sf_count[2];	/* include/exclude counts */
+	unsigned char		sf_gsresp;	/* include in g & s response? */
+	unsigned char		sf_oldin;	/* change state */
+	unsigned char		sf_crcount;	/* retrans. left to send */
+};
+
+struct ip_mc_list
+{
+	struct in_device	*interface;
+	unsigned long		multiaddr;
+	struct ip_sf_list	*sources;
+	struct ip_sf_list	*tomb;
+	unsigned int		sfmode;
+	unsigned long		sfcount[2];
+	struct ip_mc_list	*next;
+	struct timer_list	timer;
+	int			users;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	char			tm_running;
+	char			reporter;
+	char			unsolicit_count;
+	char			loaded;
+	unsigned char		gsquery;	/* check source marks? */
+	unsigned char		crcount;
+};
+
+/* V3 exponential field decoding */
+#define IGMPV3_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
+#define IGMPV3_EXP(thresh, nbmant, nbexp, value) \
+	((value) < (thresh) ? (value) : \
+        ((IGMPV3_MASK(value, nbmant) | (1<<(nbmant+nbexp))) << \
+         (IGMPV3_MASK((value) >> (nbmant), nbexp) + (nbexp))))
+
+#define IGMPV3_QQIC(value) IGMPV3_EXP(0x80, 4, 3, value)
+#define IGMPV3_MRC(value) IGMPV3_EXP(0x80, 4, 3, value)
+
+extern int ip_check_mc(struct in_device *dev, u32 mc_addr, u32 src_addr, u16 proto);
+extern int igmp_rcv(struct sk_buff *);
+extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr);
+extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr);
+extern void ip_mc_drop_socket(struct sock *sk);
+extern int ip_mc_source(int add, int omode, struct sock *sk,
+		struct ip_mreq_source *mreqs, int ifindex);
+extern int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf,int ifindex);
+extern int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
+		struct ip_msfilter __user *optval, int __user *optlen);
+extern int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
+		struct group_filter __user *optval, int __user *optlen);
+extern int ip_mc_sf_allow(struct sock *sk, u32 local, u32 rmt, int dif);
+extern void ip_mr_init(void);
+extern void ip_mc_init_dev(struct in_device *);
+extern void ip_mc_destroy_dev(struct in_device *);
+extern void ip_mc_up(struct in_device *);
+extern void ip_mc_down(struct in_device *);
+extern void ip_mc_dec_group(struct in_device *in_dev, u32 addr);
+extern void ip_mc_inc_group(struct in_device *in_dev, u32 addr);
+#endif
+#endif
diff --git a/include/linux/in.h b/include/linux/in.h
new file mode 100644
index 000000000000..fb88c66d748d
--- /dev/null
+++ b/include/linux/in.h
@@ -0,0 +1,253 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IN_H
+#define _LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+
+  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+
+  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
+  IPPROTO_AH = 51,             /* Authentication Header protocol       */
+  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
+
+  IPPROTO_COMP   = 108,                /* Compression Header protocol */
+  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
+
+  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
+  IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+	__u32	s_addr;
+};
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq 
+{
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn
+{
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__u32		imr_multiaddr;
+	__u32		imr_interface;
+	__u32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__u32		imsf_multiaddr;
+	__u32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__u32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req
+{
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req
+{
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter
+{
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo
+{
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  sa_family_t		sin_family;	/* Address family		*/
+  unsigned short int	sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+#ifdef __KERNEL__
+/* Some random defines to make it easier in the kernel.. */
+#define LOOPBACK(x)	(((x) & htonl(0xff000000)) == htonl(0x7f000000))
+#define MULTICAST(x)	(((x) & htonl(0xf0000000)) == htonl(0xe0000000))
+#define BADCLASS(x)	(((x) & htonl(0xf0000000)) == htonl(0xf0000000))
+#define ZERONET(x)	(((x) & htonl(0xff000000)) == htonl(0x00000000))
+#define LOCAL_MCAST(x)	(((x) & htonl(0xFFFFFF00)) == htonl(0xE0000000))
+
+#endif
+
+#endif	/* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
new file mode 100644
index 000000000000..f8256c582845
--- /dev/null
+++ b/include/linux/in6.h
@@ -0,0 +1,201 @@
+/*
+ *	Types and definitions for AF_INET6 
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	Sources:
+ *	IPv6 Program Interfaces for BSD Systems
+ *      <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ *	Advanced Sockets API for IPv6
+ *	<draft-stevens-advanced-api-00.txt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IN6_H
+#define _LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ *	IPv6 address structure
+ */
+
+struct in6_addr
+{
+	union 
+	{
+		__u8		u6_addr8[16];
+		__u16		u6_addr16[8];
+		__u32		u6_addr32[4];
+	} in6_u;
+#define s6_addr			in6_u.u6_addr8
+#define s6_addr16		in6_u.u6_addr16
+#define s6_addr32		in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+#if 0
+extern const struct in6_addr in6addr_any;
+#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
+#endif
+extern const struct in6_addr in6addr_loopback;
+#define IN6ADDR_LOOPBACK_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
+
+struct sockaddr_in6 {
+	unsigned short int	sin6_family;    /* AF_INET6 */
+	__u16			sin6_port;      /* Transport layer port # */
+	__u32			sin6_flowinfo;  /* IPv6 flow information */
+	struct in6_addr		sin6_addr;      /* IPv6 address */
+	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+	/* IPv6 multicast address of group */
+	struct in6_addr ipv6mr_multiaddr;
+
+	/* local IPv6 address of interface */
+	int		ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr	ipv6mr_multiaddr
+
+struct in6_flowlabel_req
+{
+	struct in6_addr	flr_dst;
+	__u32	flr_label;
+	__u8	flr_action;
+	__u8	flr_share;
+	__u16	flr_flags;
+	__u16 	flr_expires;
+	__u16	flr_linger;
+	__u32	__flr_pad;
+	/* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET	0
+#define IPV6_FL_A_PUT	1
+#define IPV6_FL_A_RENEW	2
+
+#define IPV6_FL_F_CREATE	1
+#define IPV6_FL_F_EXCL		2
+
+#define IPV6_FL_S_NONE		0
+#define IPV6_FL_S_EXCL		1
+#define IPV6_FL_S_PROCESS	2
+#define IPV6_FL_S_USER		3
+#define IPV6_FL_S_ANY		255
+
+
+/*
+ *	Bitmask constant declarations to help applications select out the 
+ *	flow label and priority fields.
+ *
+ *	Note that this are in host byte order while the flowinfo field of
+ *	sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
+#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
+
+/* These defintions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
+#define IPV6_PRIORITY_FILLER		0x0100
+#define IPV6_PRIORITY_UNATTENDED	0x0200
+#define IPV6_PRIORITY_RESERVED1		0x0300
+#define IPV6_PRIORITY_BULK		0x0400
+#define IPV6_PRIORITY_RESERVED2		0x0500
+#define IPV6_PRIORITY_INTERACTIVE	0x0600
+#define IPV6_PRIORITY_CONTROL		0x0700
+#define IPV6_PRIORITY_8			0x0800
+#define IPV6_PRIORITY_9			0x0900
+#define IPV6_PRIORITY_10		0x0a00
+#define IPV6_PRIORITY_11		0x0b00
+#define IPV6_PRIORITY_12		0x0c00
+#define IPV6_PRIORITY_13		0x0d00
+#define IPV6_PRIORITY_14		0x0e00
+#define IPV6_PRIORITY_15		0x0f00
+
+/*
+ *	IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
+#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
+#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
+#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
+#define IPPROTO_NONE		59	/* IPv6 no next header		*/
+#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
+
+/*
+ *	IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD0		0
+#define IPV6_TLV_PADN		1
+#define IPV6_TLV_ROUTERALERT	5
+#define IPV6_TLV_JUMBO		194
+
+/*
+ *	IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM		1
+#define IPV6_PKTINFO		2
+#define IPV6_HOPOPTS		3
+#define IPV6_DSTOPTS		4
+#define IPV6_RTHDR		5
+#define IPV6_PKTOPTIONS		6
+#define IPV6_CHECKSUM		7
+#define IPV6_HOPLIMIT		8
+#define IPV6_NEXTHOP		9
+#define IPV6_AUTHHDR		10
+#define IPV6_FLOWINFO		11
+
+#define IPV6_UNICAST_HOPS	16
+#define IPV6_MULTICAST_IF	17
+#define IPV6_MULTICAST_HOPS	18
+#define IPV6_MULTICAST_LOOP	19
+#define IPV6_ADD_MEMBERSHIP	20
+#define IPV6_DROP_MEMBERSHIP	21
+#define IPV6_ROUTER_ALERT	22
+#define IPV6_MTU_DISCOVER	23
+#define IPV6_MTU		24
+#define IPV6_RECVERR		25
+#define IPV6_V6ONLY		26
+#define IPV6_JOIN_ANYCAST	27
+#define IPV6_LEAVE_ANYCAST	28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT		0
+#define IPV6_PMTUDISC_WANT		1
+#define IPV6_PMTUDISC_DO		2
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR	32
+#define IPV6_FLOWINFO_SEND	33
+
+#define IPV6_IPSEC_POLICY	34
+#define IPV6_XFRM_POLICY	35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP		42
+ * MCAST_BLOCK_SOURCE		43
+ * MCAST_UNBLOCK_SOURCE		44
+ * MCAST_LEAVE_GROUP		45
+ * MCAST_JOIN_SOURCE_GROUP	46
+ * MCAST_LEAVE_SOURCE_GROUP	47
+ * MCAST_MSFILTER		48
+ */
+
+#endif
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
new file mode 100644
index 000000000000..61f25c30a2a0
--- /dev/null
+++ b/include/linux/in_route.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_IN_ROUTE_H
+#define _LINUX_IN_ROUTE_H
+
+/* IPv4 routing cache flags */
+
+#define RTCF_DEAD	RTNH_F_DEAD
+#define RTCF_ONLINK	RTNH_F_ONLINK
+
+/* Obsolete flag. About to be deleted */
+#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
+
+#define RTCF_NOTIFY	0x00010000
+#define RTCF_DIRECTDST	0x00020000
+#define RTCF_REDIRECTED	0x00040000
+#define RTCF_TPROXY	0x00080000
+
+#define RTCF_FAST	0x00200000
+#define RTCF_MASQ	0x00400000
+#define RTCF_SNAT	0x00800000
+#define RTCF_DOREDIRECT 0x01000000
+#define RTCF_DIRECTSRC	0x04000000
+#define RTCF_DNAT	0x08000000
+#define RTCF_BROADCAST	0x10000000
+#define RTCF_MULTICAST	0x20000000
+#define RTCF_REJECT	0x40000000
+#define RTCF_LOCAL	0x80000000
+
+#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
+
+#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
+
+#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/linux/inet.h b/include/linux/inet.h
new file mode 100644
index 000000000000..3b5e9fdff872
--- /dev/null
+++ b/include/linux/inet.h
@@ -0,0 +1,50 @@
+/*
+ *		Swansea University Computer Society NET3
+ *
+ *	This work is derived from NET2Debugged, which is in turn derived
+ *	from NET2D which was written by:
+ * 		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This work was derived from Ross Biro's inspirational work
+ *		for the LINUX operating system.  His version numbers were:
+ *
+ *		$Id: Space.c,v     0.8.4.5  1992/12/12 19:25:04 bir7 Exp $
+ *		$Id: arp.c,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: arp.h,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: dev.c,v       0.8.4.13 1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: dev.h,v       0.8.4.7  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: eth.c,v       0.8.4.4  1993/01/22 23:21:38 bir7 Exp $
+ *		$Id: eth.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *		$Id: icmp.c,v      0.8.4.9  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: icmp.h,v      0.8.4.2  1992/11/15 14:55:30 bir7 Exp $
+ * 		$Id: ip.c,v        0.8.4.8  1992/12/12 19:25:04 bir7 Exp $
+ * 		$Id: ip.h,v        0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
+ * 		$Id: loopback.c,v  0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
+ * 		$Id: packet.c,v    0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: protocols.c,v 0.8.4.3  1992/11/15 14:55:30 bir7 Exp $
+ *		$Id: raw.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: sock.c,v      0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: sock.h,v      0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: tcp.c,v       0.8.4.16 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: tcp.h,v       0.8.4.7  1993/01/22 22:58:08 bir7 Exp $
+ *		$Id: timer.c,v     0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: timer.h,v     0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: udp.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: udp.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *		$Id: we.c,v        0.8.4.10 1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: wereg.h,v     0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_INET_H
+#define _LINUX_INET_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+
+extern __u32 in_aton(const char *str);
+#endif
+#endif	/* _LINUX_INET_H */
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
new file mode 100644
index 000000000000..6fafb27877a7
--- /dev/null
+++ b/include/linux/inetdevice.h
@@ -0,0 +1,190 @@
+#ifndef _LINUX_INETDEVICE_H
+#define _LINUX_INETDEVICE_H
+
+#ifdef __KERNEL__
+
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <linux/rcupdate.h>
+#include <linux/timer.h>
+
+struct ipv4_devconf
+{
+	int	accept_redirects;
+	int	send_redirects;
+	int	secure_redirects;
+	int	shared_media;
+	int	accept_source_route;
+	int	rp_filter;
+	int	proxy_arp;
+	int	bootp_relay;
+	int	log_martians;
+	int	forwarding;
+	int	mc_forwarding;
+	int	tag;
+	int     arp_filter;
+	int	arp_announce;
+	int	arp_ignore;
+	int	medium_id;
+	int	no_xfrm;
+	int	no_policy;
+	int	force_igmp_version;
+	void	*sysctl;
+};
+
+extern struct ipv4_devconf ipv4_devconf;
+
+struct in_device
+{
+	struct net_device	*dev;
+	atomic_t		refcnt;
+	int			dead;
+	struct in_ifaddr	*ifa_list;	/* IP ifaddr chain		*/
+	rwlock_t		mc_list_lock;
+	struct ip_mc_list	*mc_list;	/* IP multicast filter chain    */
+	spinlock_t		mc_tomb_lock;
+	struct ip_mc_list	*mc_tomb;
+	unsigned long		mr_v1_seen;
+	unsigned long		mr_v2_seen;
+	unsigned long		mr_maxdelay;
+	unsigned char		mr_qrv;
+	unsigned char		mr_gq_running;
+	unsigned char		mr_ifc_count;
+	struct timer_list	mr_gq_timer;	/* general query timer */
+	struct timer_list	mr_ifc_timer;	/* interface change timer */
+
+	struct neigh_parms	*arp_parms;
+	struct ipv4_devconf	cnf;
+	struct rcu_head		rcu_head;
+};
+
+#define IN_DEV_FORWARD(in_dev)		((in_dev)->cnf.forwarding)
+#define IN_DEV_MFORWARD(in_dev)		(ipv4_devconf.mc_forwarding && (in_dev)->cnf.mc_forwarding)
+#define IN_DEV_RPFILTER(in_dev)		(ipv4_devconf.rp_filter && (in_dev)->cnf.rp_filter)
+#define IN_DEV_SOURCE_ROUTE(in_dev)	(ipv4_devconf.accept_source_route && (in_dev)->cnf.accept_source_route)
+#define IN_DEV_BOOTP_RELAY(in_dev)	(ipv4_devconf.bootp_relay && (in_dev)->cnf.bootp_relay)
+
+#define IN_DEV_LOG_MARTIANS(in_dev)	(ipv4_devconf.log_martians || (in_dev)->cnf.log_martians)
+#define IN_DEV_PROXY_ARP(in_dev)	(ipv4_devconf.proxy_arp || (in_dev)->cnf.proxy_arp)
+#define IN_DEV_SHARED_MEDIA(in_dev)	(ipv4_devconf.shared_media || (in_dev)->cnf.shared_media)
+#define IN_DEV_TX_REDIRECTS(in_dev)	(ipv4_devconf.send_redirects || (in_dev)->cnf.send_redirects)
+#define IN_DEV_SEC_REDIRECTS(in_dev)	(ipv4_devconf.secure_redirects || (in_dev)->cnf.secure_redirects)
+#define IN_DEV_IDTAG(in_dev)		((in_dev)->cnf.tag)
+#define IN_DEV_MEDIUM_ID(in_dev)	((in_dev)->cnf.medium_id)
+
+#define IN_DEV_RX_REDIRECTS(in_dev) \
+	((IN_DEV_FORWARD(in_dev) && \
+	  (ipv4_devconf.accept_redirects && (in_dev)->cnf.accept_redirects)) \
+	 || (!IN_DEV_FORWARD(in_dev) && \
+	  (ipv4_devconf.accept_redirects || (in_dev)->cnf.accept_redirects)))
+
+#define IN_DEV_ARPFILTER(in_dev)	(ipv4_devconf.arp_filter || (in_dev)->cnf.arp_filter)
+#define IN_DEV_ARP_ANNOUNCE(in_dev)	(max(ipv4_devconf.arp_announce, (in_dev)->cnf.arp_announce))
+#define IN_DEV_ARP_IGNORE(in_dev)	(max(ipv4_devconf.arp_ignore, (in_dev)->cnf.arp_ignore))
+
+struct in_ifaddr
+{
+	struct in_ifaddr	*ifa_next;
+	struct in_device	*ifa_dev;
+	struct rcu_head		rcu_head;
+	u32			ifa_local;
+	u32			ifa_address;
+	u32			ifa_mask;
+	u32			ifa_broadcast;
+	u32			ifa_anycast;
+	unsigned char		ifa_scope;
+	unsigned char		ifa_flags;
+	unsigned char		ifa_prefixlen;
+	char			ifa_label[IFNAMSIZ];
+};
+
+extern int register_inetaddr_notifier(struct notifier_block *nb);
+extern int unregister_inetaddr_notifier(struct notifier_block *nb);
+
+extern struct net_device 	*ip_dev_find(u32 addr);
+extern int		inet_addr_onlink(struct in_device *in_dev, u32 a, u32 b);
+extern int		devinet_ioctl(unsigned int cmd, void __user *);
+extern void		devinet_init(void);
+extern struct in_device *inetdev_init(struct net_device *dev);
+extern struct in_device	*inetdev_by_index(int);
+extern u32		inet_select_addr(const struct net_device *dev, u32 dst, int scope);
+extern u32		inet_confirm_addr(const struct net_device *dev, u32 dst, u32 local, int scope);
+extern struct in_ifaddr *inet_ifa_byprefix(struct in_device *in_dev, u32 prefix, u32 mask);
+extern void		inet_forward_change(void);
+
+static __inline__ int inet_ifa_match(u32 addr, struct in_ifaddr *ifa)
+{
+	return !((addr^ifa->ifa_address)&ifa->ifa_mask);
+}
+
+/*
+ *	Check if a mask is acceptable.
+ */
+ 
+static __inline__ int bad_mask(u32 mask, u32 addr)
+{
+	if (addr & (mask = ~mask))
+		return 1;
+	mask = ntohl(mask);
+	if (mask & (mask+1))
+		return 1;
+	return 0;
+}
+
+#define for_primary_ifa(in_dev)	{ struct in_ifaddr *ifa; \
+  for (ifa = (in_dev)->ifa_list; ifa && !(ifa->ifa_flags&IFA_F_SECONDARY); ifa = ifa->ifa_next)
+
+#define for_ifa(in_dev)	{ struct in_ifaddr *ifa; \
+  for (ifa = (in_dev)->ifa_list; ifa; ifa = ifa->ifa_next)
+
+
+#define endfor_ifa(in_dev) }
+
+static __inline__ struct in_device *
+in_dev_get(const struct net_device *dev)
+{
+	struct in_device *in_dev;
+
+	rcu_read_lock();
+	in_dev = dev->ip_ptr;
+	if (in_dev)
+		atomic_inc(&in_dev->refcnt);
+	rcu_read_unlock();
+	return in_dev;
+}
+
+static __inline__ struct in_device *
+__in_dev_get(const struct net_device *dev)
+{
+	return (struct in_device*)dev->ip_ptr;
+}
+
+extern void in_dev_finish_destroy(struct in_device *idev);
+
+static inline void in_dev_put(struct in_device *idev)
+{
+	if (atomic_dec_and_test(&idev->refcnt))
+		in_dev_finish_destroy(idev);
+}
+
+#define __in_dev_put(idev)  atomic_dec(&(idev)->refcnt)
+#define in_dev_hold(idev)   atomic_inc(&(idev)->refcnt)
+
+#endif /* __KERNEL__ */
+
+static __inline__ __u32 inet_make_mask(int logmask)
+{
+	if (logmask)
+		return htonl(~((1<<(32-logmask))-1));
+	return 0;
+}
+
+static __inline__ int inet_mask_len(__u32 mask)
+{
+	if (!(mask = ntohl(mask)))
+		return 0;
+	return 32 - ffz(~mask);
+}
+
+
+#endif /* _LINUX_INETDEVICE_H */
diff --git a/include/linux/init.h b/include/linux/init.h
new file mode 100644
index 000000000000..05c83e0521ca
--- /dev/null
+++ b/include/linux/init.h
@@ -0,0 +1,250 @@
+#ifndef _LINUX_INIT_H
+#define _LINUX_INIT_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+
+/* These macros are used to mark some functions or 
+ * initialized data (doesn't apply to uninitialized data)
+ * as `initialization' functions. The kernel can take this
+ * as hint that the function is used only during the initialization
+ * phase and free up used memory resources after
+ *
+ * Usage:
+ * For functions:
+ * 
+ * You should add __init immediately before the function name, like:
+ *
+ * static void __init initme(int x, int y)
+ * {
+ *    extern int z; z = x * y;
+ * }
+ *
+ * If the function has a prototype somewhere, you can also add
+ * __init between closing brace of the prototype and semicolon:
+ *
+ * extern int initialize_foobar_device(int, int, int) __init;
+ *
+ * For initialized data:
+ * You should insert __initdata between the variable name and equal
+ * sign followed by value, e.g.:
+ *
+ * static int init_variable __initdata = 0;
+ * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ *
+ * Don't forget to initialize data not at file scope, i.e. within a function,
+ * as gcc otherwise puts the data into the bss section and not into the init
+ * section.
+ * 
+ * Also note, that this data cannot be "const".
+ */
+
+/* These are for everybody (although not all archs will actually
+   discard it in modules) */
+#define __init		__attribute__ ((__section__ (".init.text")))
+#define __initdata	__attribute__ ((__section__ (".init.data")))
+#define __exitdata	__attribute__ ((__section__(".exit.data")))
+#define __exit_call	__attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
+
+#ifdef MODULE
+#define __exit		__attribute__ ((__section__(".exit.text")))
+#else
+#define __exit		__attribute_used__ __attribute__ ((__section__(".exit.text")))
+#endif
+
+/* For assembly routines */
+#define __INIT		.section	".init.text","ax"
+#define __FINIT		.previous
+#define __INITDATA	.section	".init.data","aw"
+
+#ifndef __ASSEMBLY__
+/*
+ * Used for initialization calls..
+ */
+typedef int (*initcall_t)(void);
+typedef void (*exitcall_t)(void);
+
+extern initcall_t __con_initcall_start[], __con_initcall_end[];
+extern initcall_t __security_initcall_start[], __security_initcall_end[];
+
+/* Defined in init/main.c */
+extern char saved_command_line[];
+#endif
+  
+#ifndef MODULE
+
+#ifndef __ASSEMBLY__
+
+/* initcalls are now grouped by functionality into separate 
+ * subsections. Ordering inside the subsections is determined
+ * by link order. 
+ * For backwards compatibility, initcall() puts the call in 
+ * the device init subsection.
+ */
+
+#define __define_initcall(level,fn) \
+	static initcall_t __initcall_##fn __attribute_used__ \
+	__attribute__((__section__(".initcall" level ".init"))) = fn
+
+#define core_initcall(fn)		__define_initcall("1",fn)
+#define postcore_initcall(fn)		__define_initcall("2",fn)
+#define arch_initcall(fn)		__define_initcall("3",fn)
+#define subsys_initcall(fn)		__define_initcall("4",fn)
+#define fs_initcall(fn)			__define_initcall("5",fn)
+#define device_initcall(fn)		__define_initcall("6",fn)
+#define late_initcall(fn)		__define_initcall("7",fn)
+
+#define __initcall(fn) device_initcall(fn)
+
+#define __exitcall(fn) \
+	static exitcall_t __exitcall_##fn __exit_call = fn
+
+#define console_initcall(fn) \
+	static initcall_t __initcall_##fn \
+	__attribute_used__ __attribute__((__section__(".con_initcall.init")))=fn
+
+#define security_initcall(fn) \
+	static initcall_t __initcall_##fn \
+	__attribute_used__ __attribute__((__section__(".security_initcall.init"))) = fn
+
+struct obs_kernel_param {
+	const char *str;
+	int (*setup_func)(char *);
+	int early;
+};
+
+/*
+ * Only for really core code.  See moduleparam.h for the normal way.
+ *
+ * Force the alignment so the compiler doesn't space elements of the
+ * obs_kernel_param "array" too far apart in .init.setup.
+ */
+#define __setup_param(str, unique_id, fn, early)			\
+	static char __setup_str_##unique_id[] __initdata = str;	\
+	static struct obs_kernel_param __setup_##unique_id	\
+		__attribute_used__				\
+		__attribute__((__section__(".init.setup")))	\
+		__attribute__((aligned((sizeof(long)))))	\
+		= { __setup_str_##unique_id, fn, early }
+
+#define __setup_null_param(str, unique_id)			\
+	__setup_param(str, unique_id, NULL, 0)
+
+#define __setup(str, fn)					\
+	__setup_param(str, fn, fn, 0)
+
+#define __obsolete_setup(str)					\
+	__setup_null_param(str, __LINE__)
+
+/* NOTE: fn is as per module_param, not __setup!  Emits warning if fn
+ * returns non-zero. */
+#define early_param(str, fn)					\
+	__setup_param(str, fn, fn, 1)
+
+/* Relies on saved_command_line being set */
+void __init parse_early_param(void);
+#endif /* __ASSEMBLY__ */
+
+/**
+ * module_init() - driver initialization entry point
+ * @x: function to be run at kernel boot time or module insertion
+ * 
+ * module_init() will either be called during do_initcalls (if
+ * builtin) or at module insertion time (if a module).  There can only
+ * be one per module.
+ */
+#define module_init(x)	__initcall(x);
+
+/**
+ * module_exit() - driver exit entry point
+ * @x: function to be run when driver is removed
+ * 
+ * module_exit() will wrap the driver clean-up code
+ * with cleanup_module() when used with rmmod when
+ * the driver is a module.  If the driver is statically
+ * compiled into the kernel, module_exit() has no effect.
+ * There can only be one per module.
+ */
+#define module_exit(x)	__exitcall(x);
+
+#else /* MODULE */
+
+/* Don't use these in modules, but some people do... */
+#define core_initcall(fn)		module_init(fn)
+#define postcore_initcall(fn)		module_init(fn)
+#define arch_initcall(fn)		module_init(fn)
+#define subsys_initcall(fn)		module_init(fn)
+#define fs_initcall(fn)			module_init(fn)
+#define device_initcall(fn)		module_init(fn)
+#define late_initcall(fn)		module_init(fn)
+
+#define security_initcall(fn)		module_init(fn)
+
+/* These macros create a dummy inline: gcc 2.9x does not count alias
+ as usage, hence the `unused function' warning when __init functions
+ are declared static. We use the dummy __*_module_inline functions
+ both to kill the warning and check the type of the init/cleanup
+ function. */
+
+/* Each module must use one module_init(), or one no_module_init */
+#define module_init(initfn)					\
+	static inline initcall_t __inittest(void)		\
+	{ return initfn; }					\
+	int init_module(void) __attribute__((alias(#initfn)));
+
+/* This is only required if you want to be unloadable. */
+#define module_exit(exitfn)					\
+	static inline exitcall_t __exittest(void)		\
+	{ return exitfn; }					\
+	void cleanup_module(void) __attribute__((alias(#exitfn)));
+
+#define __setup_param(str, unique_id, fn)	/* nothing */
+#define __setup_null_param(str, unique_id) 	/* nothing */
+#define __setup(str, func) 			/* nothing */
+#define __obsolete_setup(str) 			/* nothing */
+#endif
+
+/* Data marked not to be saved by software_suspend() */
+#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
+
+/* This means "can be init if no module support, otherwise module load
+   may call it." */
+#ifdef CONFIG_MODULES
+#define __init_or_module
+#define __initdata_or_module
+#else
+#define __init_or_module __init
+#define __initdata_or_module __initdata
+#endif /*CONFIG_MODULES*/
+
+#ifdef CONFIG_HOTPLUG
+#define __devinit
+#define __devinitdata
+#define __devexit
+#define __devexitdata
+#else
+#define __devinit __init
+#define __devinitdata __initdata
+#define __devexit __exit
+#define __devexitdata __exitdata
+#endif
+
+/* Functions marked as __devexit may be discarded at kernel link time, depending
+   on config options.  Newer versions of binutils detect references from
+   retained sections to discarded sections and flag an error.  Pointers to
+   __devexit functions must use __devexit_p(function_name), the wrapper will
+   insert either the function_name or NULL, depending on the config options.
+ */
+#if defined(MODULE) || defined(CONFIG_HOTPLUG)
+#define __devexit_p(x) x
+#else
+#define __devexit_p(x) NULL
+#endif
+
+#ifdef MODULE
+#define __exit_p(x) x
+#else
+#define __exit_p(x) NULL
+#endif
+
+#endif /* _LINUX_INIT_H */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
new file mode 100644
index 000000000000..a6a8c1a38d5e
--- /dev/null
+++ b/include/linux/init_task.h
@@ -0,0 +1,125 @@
+#ifndef _LINUX__INIT_TASK_H
+#define _LINUX__INIT_TASK_H
+
+#include <linux/file.h>
+
+#define INIT_FILES \
+{ 							\
+	.count		= ATOMIC_INIT(1), 		\
+	.file_lock	= SPIN_LOCK_UNLOCKED, 		\
+	.max_fds	= NR_OPEN_DEFAULT, 		\
+	.max_fdset	= __FD_SETSIZE, 		\
+	.next_fd	= 0, 				\
+	.fd		= &init_files.fd_array[0], 	\
+	.close_on_exec	= &init_files.close_on_exec_init, \
+	.open_fds	= &init_files.open_fds_init, 	\
+	.close_on_exec_init = { { 0, } }, 		\
+	.open_fds_init	= { { 0, } }, 			\
+	.fd_array	= { NULL, } 			\
+}
+
+#define INIT_KIOCTX(name, which_mm) \
+{							\
+	.users		= ATOMIC_INIT(1),		\
+	.dead		= 0,				\
+	.mm		= &which_mm,			\
+	.user_id	= 0,				\
+	.next		= NULL,				\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
+	.ctx_lock	= SPIN_LOCK_UNLOCKED,		\
+	.reqs_active	= 0U,				\
+	.max_reqs	= ~0U,				\
+}
+
+#define INIT_MM(name) \
+{			 					\
+	.mm_rb		= RB_ROOT,				\
+	.pgd		= swapper_pg_dir, 			\
+	.mm_users	= ATOMIC_INIT(2), 			\
+	.mm_count	= ATOMIC_INIT(1), 			\
+	.mmap_sem	= __RWSEM_INITIALIZER(name.mmap_sem),	\
+	.page_table_lock =  SPIN_LOCK_UNLOCKED, 		\
+	.mmlist		= LIST_HEAD_INIT(name.mmlist),		\
+	.cpu_vm_mask	= CPU_MASK_ALL,				\
+	.default_kioctx = INIT_KIOCTX(name.default_kioctx, name),	\
+}
+
+#define INIT_SIGNALS(sig) {	\
+	.count		= ATOMIC_INIT(1), 		\
+	.wait_chldexit	= __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
+	.shared_pending	= { 				\
+		.list = LIST_HEAD_INIT(sig.shared_pending.list),	\
+		.signal =  {{0}}}, \
+	.posix_timers	 = LIST_HEAD_INIT(sig.posix_timers),		\
+	.cpu_timers	= INIT_CPU_TIMERS(sig.cpu_timers),		\
+	.rlim		= INIT_RLIMITS,					\
+}
+
+#define INIT_SIGHAND(sighand) {						\
+	.count		= ATOMIC_INIT(1), 				\
+	.action		= { { { .sa_handler = NULL, } }, },		\
+	.siglock	= SPIN_LOCK_UNLOCKED, 				\
+}
+
+extern struct group_info init_groups;
+
+/*
+ *  INIT_TASK is used to set up the first task table, touch at
+ * your own risk!. Base=0, limit=0x1fffff (=2MB)
+ */
+#define INIT_TASK(tsk)	\
+{									\
+	.state		= 0,						\
+	.thread_info	= &init_thread_info,				\
+	.usage		= ATOMIC_INIT(2),				\
+	.flags		= 0,						\
+	.lock_depth	= -1,						\
+	.prio		= MAX_PRIO-20,					\
+	.static_prio	= MAX_PRIO-20,					\
+	.policy		= SCHED_NORMAL,					\
+	.cpus_allowed	= CPU_MASK_ALL,					\
+	.mm		= NULL,						\
+	.active_mm	= &init_mm,					\
+	.run_list	= LIST_HEAD_INIT(tsk.run_list),			\
+	.time_slice	= HZ,						\
+	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
+	.ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children),		\
+	.ptrace_list	= LIST_HEAD_INIT(tsk.ptrace_list),		\
+	.real_parent	= &tsk,						\
+	.parent		= &tsk,						\
+	.children	= LIST_HEAD_INIT(tsk.children),			\
+	.sibling	= LIST_HEAD_INIT(tsk.sibling),			\
+	.group_leader	= &tsk,						\
+	.group_info	= &init_groups,					\
+	.cap_effective	= CAP_INIT_EFF_SET,				\
+	.cap_inheritable = CAP_INIT_INH_SET,				\
+	.cap_permitted	= CAP_FULL_SET,					\
+	.keep_capabilities = 0,						\
+	.user		= INIT_USER,					\
+	.comm		= "swapper",					\
+	.thread		= INIT_THREAD,					\
+	.fs		= &init_fs,					\
+	.files		= &init_files,					\
+	.signal		= &init_signals,				\
+	.sighand	= &init_sighand,				\
+	.pending	= {						\
+		.list = LIST_HEAD_INIT(tsk.pending.list),		\
+		.signal = {{0}}},					\
+	.blocked	= {{0}},					\
+	.alloc_lock	= SPIN_LOCK_UNLOCKED,				\
+	.proc_lock	= SPIN_LOCK_UNLOCKED,				\
+	.switch_lock	= SPIN_LOCK_UNLOCKED,				\
+	.journal_info	= NULL,						\
+	.cpu_timers	= INIT_CPU_TIMERS(tsk.cpu_timers),		\
+}
+
+
+#define INIT_CPU_TIMERS(cpu_timers)					\
+{									\
+	LIST_HEAD_INIT(cpu_timers[0]),					\
+	LIST_HEAD_INIT(cpu_timers[1]),					\
+	LIST_HEAD_INIT(cpu_timers[2]),					\
+}
+
+
+#endif
diff --git a/include/linux/initrd.h b/include/linux/initrd.h
new file mode 100644
index 000000000000..55289d261b4f
--- /dev/null
+++ b/include/linux/initrd.h
@@ -0,0 +1,20 @@
+
+#define INITRD_MINOR 250 /* shouldn't collide with /dev/ram* too soon ... */
+
+/* 1 = load ramdisk, 0 = don't load */
+extern int rd_doload;
+
+/* 1 = prompt for ramdisk, 0 = don't prompt */
+extern int rd_prompt;
+
+/* starting block # of image */
+extern int rd_image_start;
+
+/* 1 if it is not an error if initrd_start < memory_start */
+extern int initrd_below_start_ok;
+
+/* free_initrd_mem always gets called with the next two as arguments.. */
+extern unsigned long initrd_start, initrd_end;
+extern void free_initrd_mem(unsigned long, unsigned long);
+
+extern unsigned int real_root_dev;
diff --git a/include/linux/input.h b/include/linux/input.h
new file mode 100644
index 000000000000..b70df8fe60e6
--- /dev/null
+++ b/include/linux/input.h
@@ -0,0 +1,1016 @@
+#ifndef _INPUT_H
+#define _INPUT_H
+
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifdef __KERNEL__
+#include <linux/time.h>
+#include <linux/list.h>
+#else
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <asm/types.h>
+#endif
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010000
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGKEYCODE		_IOR('E', 0x04, int[2])			/* get keycode */
+#define EVIOCSKEYCODE		_IOW('E', 0x04, int[2])			/* set keycode */
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global keystate */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + ev, len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + abs, struct input_absinfo)		/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + abs, struct input_absinfo)		/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+
+/*
+ * Keys and buttons
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGUEL		122
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128
+#define KEY_AGAIN		129
+#define KEY_PROPS		130
+#define KEY_UNDO		131
+#define KEY_FRONT		132
+#define KEY_COPY		133
+#define KEY_OPEN		134
+#define KEY_PASTE		135
+#define KEY_FIND		136
+#define KEY_CUT			137
+#define KEY_HELP		138
+#define KEY_MENU		139
+#define KEY_CALC		140
+#define KEY_SETUP		141
+#define KEY_SLEEP		142
+#define KEY_WAKEUP		143
+#define KEY_FILE		144
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156
+#define KEY_COMPUTER		157
+#define KEY_BACK		158
+#define KEY_FORWARD		159
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169
+#define KEY_ISO			170
+#define KEY_CONFIG		171
+#define KEY_HOMEPAGE		172
+#define KEY_REFRESH		173
+#define KEY_EXIT		174
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_UNKNOWN		240
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT 		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178
+#define KEY_TV			0x179
+#define KEY_TV2			0x17a
+#define KEY_VCR			0x17b
+#define KEY_VCR2		0x17c
+#define KEY_SAT			0x17d
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f
+#define KEY_TAPE		0x180
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188
+#define KEY_VIDEO		0x189
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192
+#define KEY_CHANNELDOWN		0x193
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_MAX			0x1ff
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+#define ABS_VOLUME		0x20
+#define ABS_MISC		0x28
+#define ABS_MAX			0x3f
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+
+/*
+ * Values describing the status of an effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * The first structures are not passed directly by using ioctls.
+ * They are sub-structures of the actually sent structure (called ff_effect)
+ */
+
+struct ff_replay {
+	__u16 length; /* Duration of an effect in ms. All other times are also expressed in ms */
+	__u16 delay;  /* Time to wait before to start playing an effect */
+};
+
+struct ff_trigger {
+	__u16 button;   /* Number of button triggering an effect */
+	__u16 interval; /* Time to wait before an effect can be re-triggered (ms) */
+};
+
+struct ff_envelope {
+	__u16 attack_length;	/* Duration of attack (ms) */
+	__u16 attack_level;	/* Level at beginning of attack */
+	__u16 fade_length;	/* Duration of fade (ms) */
+	__u16 fade_level;	/* Level at end of fade */
+};
+
+/* FF_CONSTANT */
+struct ff_constant_effect {
+	__s16 level;	    /* Strength of effect. Negative values are OK */
+	struct ff_envelope envelope;
+};
+
+/* FF_RAMP */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/* FF_SPRING of FF_FRICTION */
+struct ff_condition_effect {
+	__u16 right_saturation; /* Max level when joystick is on the right */
+	__u16 left_saturation;  /* Max level when joystick in on the left */
+
+	__s16 right_coeff;	/* Indicates how fast the force grows when the
+				   joystick moves to the right */
+	__s16 left_coeff;	/* Same for left side */
+
+	__u16 deadband;	/* Size of area where no force is produced */
+	__s16 center;	/* Position of dead zone */
+
+};
+
+/* FF_PERIODIC */
+struct ff_periodic_effect {
+	__u16 waveform;	/* Kind of wave (sine, square...) */
+	__u16 period;	/* in ms */
+	__s16 magnitude;	/* Peak value */
+	__s16 offset;	/* Mean value of wave (roughly) */
+	__u16 phase;		/* 'Horizontal' shift */
+
+	struct ff_envelope envelope;
+
+/* Only used if waveform == FF_CUSTOM */
+	__u32 custom_len;	/* Number of samples */
+	__s16 *custom_data;	/* Buffer of samples */
+/* Note: the data pointed by custom_data is copied by the driver. You can
+ * therefore dispose of the memory after the upload/update */
+};
+
+/* FF_RUMBLE */
+/* Some rumble pads have two motors of different weight.
+   strong_magnitude represents the magnitude of the vibration generated
+   by the heavy motor.
+*/
+struct ff_rumble_effect {
+	__u16 strong_magnitude;  /* Magnitude of the heavy motor */
+	__u16 weak_magnitude;    /* Magnitude of the light one */
+};
+
+/*
+ * Structure sent through ioctl from the application to the driver
+ */
+struct ff_effect {
+	__u16 type;
+/* Following field denotes the unique id assigned to an effect.
+ * If user sets if to -1, a new effect is created, and its id is returned in the same field
+ * Else, the user sets it to the effect id it wants to update.
+ */
+	__s16 id;
+
+	__u16 direction;	/* Direction. 0 deg -> 0x0000 (down)
+					     90 deg -> 0x4000 (left)
+					    180 deg -> 0x8000 (up)
+					    270 deg -> 0xC000 (right)
+				*/
+
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+
+#ifdef __KERNEL__
+
+/*
+ * In-kernel definitions.
+ */
+
+#include <linux/fs.h>
+#include <linux/timer.h>
+
+#define NBITS(x) (((x)/BITS_PER_LONG)+1)
+#define BIT(x)	(1UL<<((x)%BITS_PER_LONG))
+#define LONG(x) ((x)/BITS_PER_LONG)
+
+#define INPUT_KEYCODE(dev, scancode) ((dev->keycodesize == 1) ? ((u8*)dev->keycode)[scancode] : \
+	((dev->keycodesize == 2) ? ((u16*)dev->keycode)[scancode] : (((u32*)dev->keycode)[scancode])))
+
+#define SET_INPUT_KEYCODE(dev, scancode, val)			\
+		({	unsigned __old;				\
+		switch (dev->keycodesize) {			\
+			case 1: {				\
+				u8 *k = (u8 *)dev->keycode;	\
+				__old = k[scancode];		\
+				k[scancode] = val;		\
+				break;				\
+			}					\
+			case 2: {				\
+				u16 *k = (u16 *)dev->keycode;	\
+				__old = k[scancode];		\
+				k[scancode] = val;		\
+				break;				\
+			}					\
+			default: {				\
+				u32 *k = (u32 *)dev->keycode;	\
+				__old = k[scancode];		\
+				k[scancode] = val;		\
+				break;				\
+			}					\
+		}						\
+		__old; })
+
+struct input_dev {
+
+	void *private;
+
+	char *name;
+	char *phys;
+	char *uniq;
+	struct input_id id;
+
+	unsigned long evbit[NBITS(EV_MAX)];
+	unsigned long keybit[NBITS(KEY_MAX)];
+	unsigned long relbit[NBITS(REL_MAX)];
+	unsigned long absbit[NBITS(ABS_MAX)];
+	unsigned long mscbit[NBITS(MSC_MAX)];
+	unsigned long ledbit[NBITS(LED_MAX)];
+	unsigned long sndbit[NBITS(SND_MAX)];
+	unsigned long ffbit[NBITS(FF_MAX)];
+	int ff_effects_max;
+
+	unsigned int keycodemax;
+	unsigned int keycodesize;
+	void *keycode;
+
+	unsigned int repeat_key;
+	struct timer_list timer;
+
+	struct pt_regs *regs;
+	int state;
+
+	int sync;
+
+	int abs[ABS_MAX + 1];
+	int rep[REP_MAX + 1];
+
+	unsigned long key[NBITS(KEY_MAX)];
+	unsigned long led[NBITS(LED_MAX)];
+	unsigned long snd[NBITS(SND_MAX)];
+
+	int absmax[ABS_MAX + 1];
+	int absmin[ABS_MAX + 1];
+	int absfuzz[ABS_MAX + 1];
+	int absflat[ABS_MAX + 1];
+
+	int (*open)(struct input_dev *dev);
+	void (*close)(struct input_dev *dev);
+	int (*accept)(struct input_dev *dev, struct file *file);
+	int (*flush)(struct input_dev *dev, struct file *file);
+	int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+	int (*upload_effect)(struct input_dev *dev, struct ff_effect *effect);
+	int (*erase_effect)(struct input_dev *dev, int effect_id);
+
+	struct input_handle *grab;
+	struct device *dev;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+
+/*
+ * Structure for hotplug & device<->driver matching.
+ */
+
+#define INPUT_DEVICE_ID_MATCH_BUS	1
+#define INPUT_DEVICE_ID_MATCH_VENDOR	2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT	4
+#define INPUT_DEVICE_ID_MATCH_VERSION	8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT	0x010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT	0x020
+#define INPUT_DEVICE_ID_MATCH_RELBIT	0x040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT	0x080
+#define INPUT_DEVICE_ID_MATCH_MSCIT	0x100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT	0x200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT	0x400
+#define INPUT_DEVICE_ID_MATCH_FFBIT	0x800
+
+#define INPUT_DEVICE_ID_MATCH_DEVICE\
+	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
+#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION\
+	(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
+
+struct input_device_id {
+
+	unsigned long flags;
+
+	struct input_id id;
+
+	unsigned long evbit[NBITS(EV_MAX)];
+	unsigned long keybit[NBITS(KEY_MAX)];
+	unsigned long relbit[NBITS(REL_MAX)];
+	unsigned long absbit[NBITS(ABS_MAX)];
+	unsigned long mscbit[NBITS(MSC_MAX)];
+	unsigned long ledbit[NBITS(LED_MAX)];
+	unsigned long sndbit[NBITS(SND_MAX)];
+	unsigned long ffbit[NBITS(FF_MAX)];
+
+	unsigned long driver_info;
+};
+
+struct input_handle;
+
+struct input_handler {
+
+	void *private;
+
+	void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+	struct input_handle* (*connect)(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id);
+	void (*disconnect)(struct input_handle *handle);
+
+	struct file_operations *fops;
+	int minor;
+	char *name;
+
+	struct input_device_id *id_table;
+	struct input_device_id *blacklist;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+
+struct input_handle {
+
+	void *private;
+
+	int open;
+	char *name;
+
+	struct input_dev *dev;
+	struct input_handler *handler;
+
+	struct list_head	d_node;
+	struct list_head	h_node;
+};
+
+#define to_dev(n) container_of(n,struct input_dev,node)
+#define to_handler(n) container_of(n,struct input_handler,node);
+#define to_handle(n) container_of(n,struct input_handle,d_node)
+#define to_handle_h(n) container_of(n,struct input_handle,h_node)
+
+static inline void init_input_dev(struct input_dev *dev)
+{
+	INIT_LIST_HEAD(&dev->h_list);
+	INIT_LIST_HEAD(&dev->node);
+}
+
+void input_register_device(struct input_dev *);
+void input_unregister_device(struct input_dev *);
+
+void input_register_handler(struct input_handler *);
+void input_unregister_handler(struct input_handler *);
+
+int input_grab_device(struct input_handle *);
+void input_release_device(struct input_handle *);
+
+int input_open_device(struct input_handle *);
+void input_close_device(struct input_handle *);
+
+int input_accept_process(struct input_handle *handle, struct file *file);
+int input_flush_device(struct input_handle* handle, struct file* file);
+
+void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+
+static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_KEY, code, !!value);
+}
+
+static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_REL, code, value);
+}
+
+static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_ABS, code, value);
+}
+
+static inline void input_report_ff(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_FF, code, value);
+}
+
+static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_FF_STATUS, code, value);
+}
+
+static inline void input_regs(struct input_dev *dev, struct pt_regs *regs)
+{
+	dev->regs = regs;
+}
+
+static inline void input_sync(struct input_dev *dev)
+{
+	input_event(dev, EV_SYN, SYN_REPORT, 0);
+	dev->regs = NULL;
+}
+
+static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
+{
+	dev->absmin[axis] = min;
+	dev->absmax[axis] = max;
+	dev->absfuzz[axis] = fuzz;
+	dev->absflat[axis] = flat;
+
+	dev->absbit[LONG(axis)] |= BIT(axis);
+}
+
+extern struct class_simple *input_class;
+
+#endif
+#endif
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
new file mode 100644
index 000000000000..d99e7aeb7d33
--- /dev/null
+++ b/include/linux/interrupt.h
@@ -0,0 +1,289 @@
+/* interrupt.h */
+#ifndef _LINUX_INTERRUPT_H
+#define _LINUX_INTERRUPT_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/preempt.h>
+#include <linux/cpumask.h>
+#include <linux/hardirq.h>
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+/*
+ * For 2.4.x compatibility, 2.4.x can use
+ *
+ *	typedef void irqreturn_t;
+ *	#define IRQ_NONE
+ *	#define IRQ_HANDLED
+ *	#define IRQ_RETVAL(x)
+ *
+ * To mix old-style and new-style irq handler returns.
+ *
+ * IRQ_NONE means we didn't handle it.
+ * IRQ_HANDLED means that we did have a valid interrupt and handled it.
+ * IRQ_RETVAL(x) selects on the two depending on x being non-zero (for handled)
+ */
+typedef int irqreturn_t;
+
+#define IRQ_NONE	(0)
+#define IRQ_HANDLED	(1)
+#define IRQ_RETVAL(x)	((x) != 0)
+
+struct irqaction {
+	irqreturn_t (*handler)(int, void *, struct pt_regs *);
+	unsigned long flags;
+	cpumask_t mask;
+	const char *name;
+	void *dev_id;
+	struct irqaction *next;
+	int irq;
+	struct proc_dir_entry *dir;
+};
+
+extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
+extern int request_irq(unsigned int,
+		       irqreturn_t (*handler)(int, void *, struct pt_regs *),
+		       unsigned long, const char *, void *);
+extern void free_irq(unsigned int, void *);
+
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+extern void disable_irq_nosync(unsigned int irq);
+extern void disable_irq(unsigned int irq);
+extern void enable_irq(unsigned int irq);
+#endif
+
+/*
+ * Temporary defines for UP kernels, until all code gets fixed.
+ */
+#ifndef CONFIG_SMP
+static inline void __deprecated cli(void)
+{
+	local_irq_disable();
+}
+static inline void __deprecated sti(void)
+{
+	local_irq_enable();
+}
+static inline void __deprecated save_flags(unsigned long *x)
+{
+	local_save_flags(*x);
+}
+#define save_flags(x) save_flags(&x);
+static inline void __deprecated restore_flags(unsigned long x)
+{
+	local_irq_restore(x);
+}
+
+static inline void __deprecated save_and_cli(unsigned long *x)
+{
+	local_irq_save(*x);
+}
+#define save_and_cli(x)	save_and_cli(&x)
+#endif /* CONFIG_SMP */
+
+/* SoftIRQ primitives.  */
+#define local_bh_disable() \
+		do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0)
+#define __local_bh_enable() \
+		do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0)
+
+extern void local_bh_enable(void);
+
+/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
+   frequency threaded job scheduling. For almost all the purposes
+   tasklets are more than enough. F.e. all serial device BHs et
+   al. should be converted to tasklets, not to softirqs.
+ */
+
+enum
+{
+	HI_SOFTIRQ=0,
+	TIMER_SOFTIRQ,
+	NET_TX_SOFTIRQ,
+	NET_RX_SOFTIRQ,
+	SCSI_SOFTIRQ,
+	TASKLET_SOFTIRQ
+};
+
+/* softirq mask and active fields moved to irq_cpustat_t in
+ * asm/hardirq.h to get better cache usage.  KAO
+ */
+
+struct softirq_action
+{
+	void	(*action)(struct softirq_action *);
+	void	*data;
+};
+
+asmlinkage void do_softirq(void);
+extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
+extern void softirq_init(void);
+#define __raise_softirq_irqoff(nr) do { local_softirq_pending() |= 1UL << (nr); } while (0)
+extern void FASTCALL(raise_softirq_irqoff(unsigned int nr));
+extern void FASTCALL(raise_softirq(unsigned int nr));
+
+
+/* Tasklets --- multithreaded analogue of BHs.
+
+   Main feature differing them of generic softirqs: tasklet
+   is running only on one CPU simultaneously.
+
+   Main feature differing them of BHs: different tasklets
+   may be run simultaneously on different CPUs.
+
+   Properties:
+   * If tasklet_schedule() is called, then tasklet is guaranteed
+     to be executed on some cpu at least once after this.
+   * If the tasklet is already scheduled, but its excecution is still not
+     started, it will be executed only once.
+   * If this tasklet is already running on another CPU (or schedule is called
+     from tasklet itself), it is rescheduled for later.
+   * Tasklet is strictly serialized wrt itself, but not
+     wrt another tasklets. If client needs some intertask synchronization,
+     he makes it with spinlocks.
+ */
+
+struct tasklet_struct
+{
+	struct tasklet_struct *next;
+	unsigned long state;
+	atomic_t count;
+	void (*func)(unsigned long);
+	unsigned long data;
+};
+
+#define DECLARE_TASKLET(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
+
+#define DECLARE_TASKLET_DISABLED(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
+
+
+enum
+{
+	TASKLET_STATE_SCHED,	/* Tasklet is scheduled for execution */
+	TASKLET_STATE_RUN	/* Tasklet is running (SMP only) */
+};
+
+#ifdef CONFIG_SMP
+static inline int tasklet_trylock(struct tasklet_struct *t)
+{
+	return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock(struct tasklet_struct *t)
+{
+	smp_mb__before_clear_bit(); 
+	clear_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock_wait(struct tasklet_struct *t)
+{
+	while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
+}
+#else
+#define tasklet_trylock(t) 1
+#define tasklet_unlock_wait(t) do { } while (0)
+#define tasklet_unlock(t) do { } while (0)
+#endif
+
+extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t));
+
+static inline void tasklet_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_schedule(t);
+}
+
+extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t));
+
+static inline void tasklet_hi_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_hi_schedule(t);
+}
+
+
+static inline void tasklet_disable_nosync(struct tasklet_struct *t)
+{
+	atomic_inc(&t->count);
+	smp_mb__after_atomic_inc();
+}
+
+static inline void tasklet_disable(struct tasklet_struct *t)
+{
+	tasklet_disable_nosync(t);
+	tasklet_unlock_wait(t);
+	smp_mb();
+}
+
+static inline void tasklet_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+static inline void tasklet_hi_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+extern void tasklet_kill(struct tasklet_struct *t);
+extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
+extern void tasklet_init(struct tasklet_struct *t,
+			 void (*func)(unsigned long), unsigned long data);
+
+/*
+ * Autoprobing for irqs:
+ *
+ * probe_irq_on() and probe_irq_off() provide robust primitives
+ * for accurate IRQ probing during kernel initialization.  They are
+ * reasonably simple to use, are not "fooled" by spurious interrupts,
+ * and, unlike other attempts at IRQ probing, they do not get hung on
+ * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
+ *
+ * For reasonably foolproof probing, use them as follows:
+ *
+ * 1. clear and/or mask the device's internal interrupt.
+ * 2. sti();
+ * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
+ * 4. enable the device and cause it to trigger an interrupt.
+ * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
+ * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
+ * 7. service the device to clear its pending interrupt.
+ * 8. loop again if paranoia is required.
+ *
+ * probe_irq_on() returns a mask of allocated irq's.
+ *
+ * probe_irq_off() takes the mask as a parameter,
+ * and returns the irq number which occurred,
+ * or zero if none occurred, or a negative irq number
+ * if more than one irq occurred.
+ */
+
+#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
+static inline unsigned long probe_irq_on(void)
+{
+	return 0;
+}
+static inline int probe_irq_off(unsigned long val)
+{
+	return 0;
+}
+static inline unsigned int probe_irq_mask(unsigned long val)
+{
+	return 0;
+}
+#else
+extern unsigned long probe_irq_on(void);	/* returns 0 on failure */
+extern int probe_irq_off(unsigned long);	/* returns 0 or negative on failure */
+extern unsigned int probe_irq_mask(unsigned long);	/* returns mask of ISA interrupts */
+#endif
+
+#endif
diff --git a/include/linux/ioc4_common.h b/include/linux/ioc4_common.h
new file mode 100644
index 000000000000..b03bcc46df55
--- /dev/null
+++ b/include/linux/ioc4_common.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _LINUX_IOC4_COMMON_H
+#define _LINUX_IOC4_COMMON_H
+
+/* prototypes */
+
+int ioc4_serial_init(void);
+
+int ioc4_serial_attach_one(struct pci_dev *pdev, const struct
+				pci_device_id *pci_id);
+int ioc4_ide_attach_one(struct pci_dev *pdev, const struct
+				pci_device_id *pci_id);
+
+#endif	/* _LINUX_IOC4_COMMON_H */
diff --git a/include/linux/ioctl.h b/include/linux/ioctl.h
new file mode 100644
index 000000000000..aa91eb3951ef
--- /dev/null
+++ b/include/linux/ioctl.h
@@ -0,0 +1,7 @@
+#ifndef _LINUX_IOCTL_H
+#define _LINUX_IOCTL_H
+
+#include <asm/ioctl.h>
+
+#endif /* _LINUX_IOCTL_H */
+
diff --git a/include/linux/ioctl32.h b/include/linux/ioctl32.h
new file mode 100644
index 000000000000..e1a641819428
--- /dev/null
+++ b/include/linux/ioctl32.h
@@ -0,0 +1,37 @@
+#ifndef IOCTL32_H
+#define IOCTL32_H 1
+
+struct file;
+
+typedef int (*ioctl_trans_handler_t)(unsigned int, unsigned int,
+					unsigned long, struct file *);
+
+struct ioctl_trans {
+	unsigned long cmd;
+	ioctl_trans_handler_t handler;
+	struct ioctl_trans *next;
+};
+
+/* 
+ * Register an 32bit ioctl translation handler for ioctl cmd.
+ *
+ * handler == NULL: use 64bit ioctl handler.
+ * arguments to handler:  fd: file descriptor
+ *                        cmd: ioctl command.
+ *                        arg: ioctl argument
+ *                        struct file *file: file descriptor pointer.
+ */ 
+
+#ifdef CONFIG_COMPAT
+extern int register_ioctl32_conversion(unsigned int cmd,
+				ioctl_trans_handler_t handler);
+extern int unregister_ioctl32_conversion(unsigned int cmd);
+
+#else
+
+#define register_ioctl32_conversion(cmd, handler)	({ 0; })
+#define unregister_ioctl32_conversion(cmd)		({ 0; })
+
+#endif
+
+#endif
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
new file mode 100644
index 000000000000..18d010bee635
--- /dev/null
+++ b/include/linux/ioport.h
@@ -0,0 +1,127 @@
+/*
+ * ioport.h	Definitions of routines for detecting, reserving and
+ *		allocating system resources.
+ *
+ * Authors:	Linus Torvalds
+ */
+
+#ifndef _LINUX_IOPORT_H
+#define _LINUX_IOPORT_H
+
+#include <linux/compiler.h>
+/*
+ * Resources are tree-like, allowing
+ * nesting etc..
+ */
+struct resource {
+	const char *name;
+	unsigned long start, end;
+	unsigned long flags;
+	struct resource *parent, *sibling, *child;
+};
+
+struct resource_list {
+	struct resource_list *next;
+	struct resource *res;
+	struct pci_dev *dev;
+};
+
+/*
+ * IO resources have these defined flags.
+ */
+#define IORESOURCE_BITS		0x000000ff	/* Bus-specific bits */
+
+#define IORESOURCE_IO		0x00000100	/* Resource type */
+#define IORESOURCE_MEM		0x00000200
+#define IORESOURCE_IRQ		0x00000400
+#define IORESOURCE_DMA		0x00000800
+
+#define IORESOURCE_PREFETCH	0x00001000	/* No side effects */
+#define IORESOURCE_READONLY	0x00002000
+#define IORESOURCE_CACHEABLE	0x00004000
+#define IORESOURCE_RANGELENGTH	0x00008000
+#define IORESOURCE_SHADOWABLE	0x00010000
+#define IORESOURCE_BUS_HAS_VGA	0x00080000
+
+#define IORESOURCE_DISABLED	0x10000000
+#define IORESOURCE_UNSET	0x20000000
+#define IORESOURCE_AUTO		0x40000000
+#define IORESOURCE_BUSY		0x80000000	/* Driver has marked this resource busy */
+
+/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_IRQ_HIGHEDGE		(1<<0)
+#define IORESOURCE_IRQ_LOWEDGE		(1<<1)
+#define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
+#define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
+
+/* ISA PnP DMA specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_DMA_TYPE_MASK	(3<<0)
+#define IORESOURCE_DMA_8BIT		(0<<0)
+#define IORESOURCE_DMA_8AND16BIT	(1<<0)
+#define IORESOURCE_DMA_16BIT		(2<<0)
+
+#define IORESOURCE_DMA_MASTER		(1<<2)
+#define IORESOURCE_DMA_BYTE		(1<<3)
+#define IORESOURCE_DMA_WORD		(1<<4)
+
+#define IORESOURCE_DMA_SPEED_MASK	(3<<6)
+#define IORESOURCE_DMA_COMPATIBLE	(0<<6)
+#define IORESOURCE_DMA_TYPEA		(1<<6)
+#define IORESOURCE_DMA_TYPEB		(2<<6)
+#define IORESOURCE_DMA_TYPEF		(3<<6)
+
+/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_MEM_WRITEABLE	(1<<0)	/* dup: IORESOURCE_READONLY */
+#define IORESOURCE_MEM_CACHEABLE	(1<<1)	/* dup: IORESOURCE_CACHEABLE */
+#define IORESOURCE_MEM_RANGELENGTH	(1<<2)	/* dup: IORESOURCE_RANGELENGTH */
+#define IORESOURCE_MEM_TYPE_MASK	(3<<3)
+#define IORESOURCE_MEM_8BIT		(0<<3)
+#define IORESOURCE_MEM_16BIT		(1<<3)
+#define IORESOURCE_MEM_8AND16BIT	(2<<3)
+#define IORESOURCE_MEM_32BIT		(3<<3)
+#define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
+#define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
+
+/* PCI ROM control bits (IORESOURCE_BITS) */
+#define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
+#define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
+#define IORESOURCE_ROM_COPY		(1<<2)	/* ROM is alloc'd copy, resource field overlaid */
+
+/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+
+extern int request_resource(struct resource *root, struct resource *new);
+extern struct resource * ____request_resource(struct resource *root, struct resource *new);
+extern int release_resource(struct resource *new);
+extern int insert_resource(struct resource *parent, struct resource *new);
+extern int allocate_resource(struct resource *root, struct resource *new,
+			     unsigned long size,
+			     unsigned long min, unsigned long max,
+			     unsigned long align,
+			     void (*alignf)(void *, struct resource *,
+					    unsigned long, unsigned long),
+			     void *alignf_data);
+int adjust_resource(struct resource *res, unsigned long start,
+		    unsigned long size);
+
+/* Convenience shorthand with allocation */
+#define request_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name))
+#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name))
+#define rename_region(region, newname) do { (region)->name = (newname); } while (0)
+
+extern struct resource * __request_region(struct resource *, unsigned long start, unsigned long n, const char *name);
+
+/* Compatibility cruft */
+#define release_region(start,n)	__release_region(&ioport_resource, (start), (n))
+#define check_mem_region(start,n)	__check_region(&iomem_resource, (start), (n))
+#define release_mem_region(start,n)	__release_region(&iomem_resource, (start), (n))
+
+extern int __check_region(struct resource *, unsigned long, unsigned long);
+extern void __release_region(struct resource *, unsigned long, unsigned long);
+
+static inline int __deprecated check_region(unsigned long s, unsigned long n)
+{
+	return __check_region(&ioport_resource, s, n);
+}
+#endif	/* _LINUX_IOPORT_H */
diff --git a/include/linux/ip.h b/include/linux/ip.h
new file mode 100644
index 000000000000..8438c68591f9
--- /dev/null
+++ b/include/linux/ip.h
@@ -0,0 +1,221 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP protocol.
+ *
+ * Version:	@(#)ip.h	1.0.2	04/28/93
+ *
+ * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 |IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
+#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
+#define IPOPT_RR	(7 |IPOPT_CONTROL)
+#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0		/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/types.h>
+#include <net/sock.h>
+#include <linux/igmp.h>
+#include <net/flow.h>
+
+struct ip_options {
+  __u32		faddr;				/* Saved first hop address */
+  unsigned char	optlen;
+  unsigned char srr;
+  unsigned char rr;
+  unsigned char ts;
+  unsigned char is_setbyuser:1,			/* Set by setsockopt?			*/
+                is_data:1,			/* Options in __data, rather than skb	*/
+                is_strictroute:1,		/* Strict source route			*/
+                srr_is_hit:1,			/* Packet destination addr was our one	*/
+                is_changed:1,			/* IP checksum more not valid		*/	
+                rr_needaddr:1,			/* Need to record addr of outgoing dev	*/
+                ts_needtime:1,			/* Need to record timestamp		*/
+                ts_needaddr:1;			/* Need to record addr of outgoing dev  */
+  unsigned char router_alert;
+  unsigned char __pad1;
+  unsigned char __pad2;
+  unsigned char __data[0];
+};
+
+#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+
+struct ipv6_pinfo;
+
+struct inet_sock {
+	/* sk and pinet6 has to be the first two members of inet_sock */
+	struct sock		sk;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	struct ipv6_pinfo	*pinet6;
+#endif
+	/* Socket demultiplex comparisons on incoming packets. */
+	__u32			daddr;		/* Foreign IPv4 addr */
+	__u32			rcv_saddr;	/* Bound local IPv4 addr */
+	__u16			dport;		/* Destination port */
+	__u16			num;		/* Local port */
+	__u32			saddr;		/* Sending source */
+	__s16			uc_ttl;		/* Unicast TTL */
+	__u16			cmsg_flags;
+	struct ip_options	*opt;
+	__u16			sport;		/* Source port */
+	__u16			id;		/* ID counter for DF pkts */
+	__u8			tos;		/* TOS */
+	__u8			mc_ttl;		/* Multicasting TTL */
+	__u8			pmtudisc;
+	unsigned		recverr : 1,
+				freebind : 1,
+				hdrincl : 1,
+				mc_loop : 1;
+	int			mc_index;	/* Multicast device index */
+	__u32			mc_addr;
+	struct ip_mc_socklist	*mc_list;	/* Group array */
+	/*
+	 * Following members are used to retain the infomation to build
+	 * an ip header on each ip fragmentation while the socket is corked.
+	 */
+	struct {
+		unsigned int		flags;
+		unsigned int		fragsize;
+		struct ip_options	*opt;
+		struct rtable		*rt;
+		int			length; /* Total length of all frames */
+		u32			addr;
+		struct flowi		fl;
+	} cork;
+};
+
+#define IPCORK_OPT	1	/* ip-options has been held in ipcork.opt */
+#define IPCORK_ALLFRAG	2	/* always fragment (for ipv6 for now) */
+
+static inline struct inet_sock *inet_sk(const struct sock *sk)
+{
+	return (struct inet_sock *)sk;
+}
+
+static inline void __inet_sk_copy_descendant(struct sock *sk_to,
+					     const struct sock *sk_from,
+					     const int ancestor_size)
+{
+	memcpy(inet_sk(sk_to) + 1, inet_sk(sk_from) + 1,
+	       sk_from->sk_prot->obj_size - ancestor_size);
+}
+#if !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE))
+static inline void inet_sk_copy_descendant(struct sock *sk_to,
+					   const struct sock *sk_from)
+{
+	__inet_sk_copy_descendant(sk_to, sk_from, sizeof(struct inet_sock));
+}
+#endif
+#endif
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+  		ihl:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8	tos;
+	__u16	tot_len;
+	__u16	id;
+	__u16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__u16	check;
+	__u32	saddr;
+	__u32	daddr;
+	/*The options start here. */
+};
+
+struct ip_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;		/* This one is measured in 32 bit units! */
+	__u16 reserved;
+	__u32 spi;
+	__u32 seq_no;		/* Sequence number */
+	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+	__u32 spi;
+	__u32 seq_no;		/* Sequence number */
+	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__u16 cpi;
+};
+
+#endif	/* _LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
new file mode 100644
index 000000000000..5c23aeb104ca
--- /dev/null
+++ b/include/linux/ip6_tunnel.h
@@ -0,0 +1,34 @@
+/*
+ * $Id$
+ */
+
+#ifndef _IP6_TUNNEL_H
+#define _IP6_TUNNEL_H
+
+#define IPV6_TLV_TNL_ENCAP_LIMIT 4
+#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
+
+/* don't add encapsulation limit if one isn't present in inner packet */
+#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
+/* copy the traffic class field from the inner packet */
+#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
+/* copy the flowlabel from the inner packet */
+#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
+/* being used for Mobile IPv6 */
+#define IP6_TNL_F_MIP6_DEV 0x8
+/* copy DSCP from the outer packet */
+#define IP6_TNL_F_RCV_DSCP_COPY 0x10
+
+struct ip6_tnl_parm {
+	char name[IFNAMSIZ];	/* name of tunnel device */
+	int link;		/* ifindex of underlying L2 interface */
+	__u8 proto;		/* tunnel protocol */
+	__u8 encap_limit;	/* encapsulation limit for tunnel */
+	__u8 hop_limit;		/* hop limit for tunnel */
+	__u32 flowinfo;		/* traffic class and flowlabel for tunnel */
+	__u32 flags;		/* tunnel flags */
+	struct in6_addr laddr;	/* local tunnel end-point address */
+	struct in6_addr raddr;	/* remote tunnel end-point address */
+};
+
+#endif
diff --git a/include/linux/ip_mp_alg.h b/include/linux/ip_mp_alg.h
new file mode 100644
index 000000000000..e234e2008f5d
--- /dev/null
+++ b/include/linux/ip_mp_alg.h
@@ -0,0 +1,22 @@
+/* ip_mp_alg.h: IPV4 multipath algorithm support, user-visible values.
+ *
+ * Copyright (C) 2004, 2005 Einar Lueck <elueck@de.ibm.com>
+ * Copyright (C) 2005 David S. Miller <davem@davemloft.net>
+ */
+
+#ifndef _LINUX_IP_MP_ALG_H
+#define _LINUX_IP_MP_ALG_H
+
+enum ip_mp_alg {
+	IP_MP_ALG_NONE,
+	IP_MP_ALG_RR,
+	IP_MP_ALG_DRR,
+	IP_MP_ALG_RANDOM,
+	IP_MP_ALG_WRANDOM,
+	__IP_MP_ALG_MAX
+};
+
+#define IP_MP_ALG_MAX (__IP_MP_ALG_MAX - 1)
+
+#endif /* _LINUX_IP_MP_ALG_H */
+
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
new file mode 100644
index 000000000000..b291189737e7
--- /dev/null
+++ b/include/linux/ipc.h
@@ -0,0 +1,75 @@
+#ifndef _LINUX_IPC_H
+#define _LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)  
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT  00001000   /* create if key is nonexistent */
+#define IPC_EXCL   00002000   /* fail if key exists */
+#define IPC_NOWAIT 00004000   /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+   should avoid using them if possible */
+   
+#define IPC_DIPC 00010000  /* make it distributed */
+#define IPC_OWN  00020000  /* this machine is the DIPC owner */
+
+/* 
+ * Control commands used with semctl, msgctl and shmctl 
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0     /* remove resource */
+#define IPC_SET  1     /* set ipc_perm options */
+#define IPC_STAT 2     /* get ipc_perm options */
+#define IPC_INFO 3     /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
+			   architectures) */
+#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
+			   message sizes, etc. */
+
+#ifdef __KERNEL__
+
+#define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
+
+/* used by in-kernel data structures */
+struct kern_ipc_perm
+{
+	spinlock_t	lock;
+	int		deleted;
+	key_t		key;
+	uid_t		uid;
+	gid_t		gid;
+	uid_t		cuid;
+	gid_t		cgid;
+	mode_t		mode; 
+	unsigned long	seq;
+	void		*security;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_IPC_H */
+
+
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
new file mode 100644
index 000000000000..2ec265e1045f
--- /dev/null
+++ b/include/linux/ipmi.h
@@ -0,0 +1,602 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_H
+#define __LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+
+/*
+ * This file describes an interface to an IPMI driver.  You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver.  The physical interfaces bind as a lower layer on the
+ * driver.  They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc.  The driver keeps track of
+ * commands the user sends and tracks the responses.  The responses
+ * will go back to the application that send the command.  If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application.  Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it.  Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications.  The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different.  The stuff in the
+ * #ifdef KERNEL below is the in-kernel interface.  The userland
+ * interface is defined later in the file.  */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type.  This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr
+{
+	 /* Try to take these from the "Channel Medium Type" table
+	    in section 6.5 of the IPMI 1.5 manual. */
+	int   addr_type;
+	short channel;
+	char  data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
+struct ipmi_system_interface_addr
+{
+	int           addr_type;
+	short         channel;
+	unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE		0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+   IPMI 1.5 manual. */ 
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
+struct ipmi_ipmb_addr
+{
+	int           addr_type;
+	short         channel;
+	unsigned char slave_addr;
+	unsigned char lun;
+};
+
+/*
+ * A LAN Address.  This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A concious decision was made here to deviate slightly from the IPMI
+ * spec.  We do not use rqSWID and rsSWID like it shows in the
+ * message.  Instead, we use remote_SWID and local_SWID.  This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address.  If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID.  Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE		0x04
+struct ipmi_lan_addr
+{
+	int           addr_type;
+	short         channel;
+	unsigned char privilege;
+	unsigned char session_handle;
+	unsigned char remote_SWID;
+	unsigned char local_SWID;
+	unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC.  When using this
+ * channel, This is for the system interface address type only.  FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL  0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+
+/*
+ * A raw IPMI message without any addressing.  This covers both
+ * commands and responses.  The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg
+{
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  __user *data;
+};
+
+struct kernel_ipmi_msg
+{
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface.  This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
+					      a sent response, giving any
+					      error status for sending the
+					      response.  When you send a
+					      response message, this will
+					      be returned. */
+/* Note that async events and received commands do not have a completion
+   code as the first byte of the incoming data, unlike a response. */
+
+
+
+#ifdef __KERNEL__
+
+/*
+ * The in-kernel interface.
+ */
+#include <linux/list.h>
+#include <linux/module.h>
+
+/* Opaque type for a IPMI message user.  One of these is needed to
+   send and receive messages. */
+typedef struct ipmi_user *ipmi_user_t;
+
+/*
+ * Stuff coming from the receive interface comes as one of these.
+ * They are allocated, the receiver must free them with
+ * ipmi_free_recv_msg() when done with the message.  The link is not
+ * used after the message is delivered, so the upper layer may use the
+ * link to build a linked list, if it likes.
+ */
+struct ipmi_recv_msg
+{
+	struct list_head link;
+
+	/* The type of message as defined in the "Receive Types"
+           defines above. */
+	int              recv_type;
+
+	ipmi_user_t      user;
+	struct ipmi_addr addr;
+	long             msgid;
+	struct kernel_ipmi_msg  msg;
+
+	/* The user_msg_data is the data supplied when a message was
+	   sent, if this is a response to a sent message.  If this is
+	   not a response to a sent message, then user_msg_data will
+	   be NULL. */
+	void             *user_msg_data;
+
+	/* Call this when done with the message.  It will presumably free
+	   the message and do any other necessary cleanup. */
+	void (*done)(struct ipmi_recv_msg *msg);
+
+	/* Place-holder for the data, don't make any assumptions about
+	   the size or existance of this, since it may change. */
+	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
+};
+
+/* Allocate and free the receive message. */
+static inline void ipmi_free_recv_msg(struct ipmi_recv_msg *msg)
+{
+	msg->done(msg);
+}
+
+struct ipmi_user_hndl
+{
+        /* Routine type to call when a message needs to be routed to
+	   the upper layer.  This will be called with some locks held,
+	   the only IPMI routines that can be called are ipmi_request
+	   and the alloc/free operations.  The handler_data is the
+	   variable supplied when the receive handler was registered. */
+	void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
+			       void                 *user_msg_data);
+
+	/* Called when the interface detects a watchdog pre-timeout.  If
+	   this is NULL, it will be ignored for the user. */
+	void (*ipmi_watchdog_pretimeout)(void *handler_data);
+};
+
+/* Create a new user of the IPMI layer on the given interface number. */
+int ipmi_create_user(unsigned int          if_num,
+		     struct ipmi_user_hndl *handler,
+		     void                  *handler_data,
+		     ipmi_user_t           *user);
+
+/* Destroy the given user of the IPMI layer.  Note that after this
+   function returns, the system is guaranteed to not call any
+   callbacks for the user.  Thus as long as you destroy all the users
+   before you unload a module, you will be safe.  And if you destroy
+   the users before you destroy the callback structures, it should be
+   safe, too. */
+int ipmi_destroy_user(ipmi_user_t user);
+
+/* Get the IPMI version of the BMC we are talking to. */
+void ipmi_get_version(ipmi_user_t   user,
+		      unsigned char *major,
+		      unsigned char *minor);
+
+/* Set and get the slave address and LUN that we will use for our
+   source messages.  Note that this affects the interface, not just
+   this user, so it will affect all users of this interface.  This is
+   so some initialization code can come in and do the OEM-specific
+   things it takes to determine your address (if not the BMC) and set
+   it for everyone else. */
+void ipmi_set_my_address(ipmi_user_t   user,
+			 unsigned char address);
+unsigned char ipmi_get_my_address(ipmi_user_t user);
+void ipmi_set_my_LUN(ipmi_user_t   user,
+		     unsigned char LUN);
+unsigned char ipmi_get_my_LUN(ipmi_user_t user);
+
+/*
+ * Like ipmi_request, but lets you specify the number of retries and
+ * the retry time.  The retries is the number of times the message
+ * will be resent if no reply is received.  If set to -1, the default
+ * value will be used.  The retry time is the time in milliseconds
+ * between retries.  If set to zero, the default value will be
+ * used.
+ *
+ * Don't use this unless you *really* have to.  It's primarily for the
+ * IPMI over LAN converter; since the LAN stuff does its own retries,
+ * it makes no sense to do it here.  However, this can be used if you
+ * have unusual requirements.
+ */
+int ipmi_request_settime(ipmi_user_t      user,
+			 struct ipmi_addr *addr,
+			 long             msgid,
+			 struct kernel_ipmi_msg  *msg,
+			 void             *user_msg_data,
+			 int              priority,
+			 int              max_retries,
+			 unsigned int     retry_time_ms);
+
+/*
+ * Like ipmi_request, but with messages supplied.  This will not
+ * allocate any memory, and the messages may be statically allocated
+ * (just make sure to do the "done" handling on them).  Note that this
+ * is primarily for the watchdog timer, since it should be able to
+ * send messages even if no memory is available.  This is subject to
+ * change as the system changes, so don't use it unless you REALLY
+ * have to.
+ */
+int ipmi_request_supply_msgs(ipmi_user_t          user,
+			     struct ipmi_addr     *addr,
+			     long                 msgid,
+			     struct kernel_ipmi_msg *msg,
+			     void                 *user_msg_data,
+			     void                 *supplied_smi,
+			     struct ipmi_recv_msg *supplied_recv,
+			     int                  priority);
+
+/*
+ * When commands come in to the SMS, the user can register to receive
+ * them.  Only one user can be listening on a specific netfn/cmd pair
+ * at a time, you will get an EBUSY error if the command is already
+ * registered.  If a command is received that does not have a user
+ * registered, the driver will automatically return the proper
+ * error.
+ */
+int ipmi_register_for_cmd(ipmi_user_t   user,
+			  unsigned char netfn,
+			  unsigned char cmd);
+int ipmi_unregister_for_cmd(ipmi_user_t   user,
+			    unsigned char netfn,
+			    unsigned char cmd);
+
+/*
+ * Allow run-to-completion mode to be set for the interface of
+ * a specific user.
+ */
+void ipmi_user_set_run_to_completion(ipmi_user_t user, int val);
+
+/*
+ * When the user is created, it will not receive IPMI events by
+ * default.  The user must set this to TRUE to get incoming events.
+ * The first user that sets this to TRUE will receive all events that
+ * have been queued while no one was waiting for events.
+ */
+int ipmi_set_gets_events(ipmi_user_t user, int val);
+
+/*
+ * Called when a new SMI is registered.  This will also be called on
+ * every existing interface when a new watcher is registered with
+ * ipmi_smi_watcher_register().
+ */
+struct ipmi_smi_watcher
+{
+	struct list_head link;
+
+	/* You must set the owner to the current module, if you are in
+	   a module (generally just set it to "THIS_MODULE"). */
+	struct module *owner;
+
+	/* These two are called with read locks held for the interface
+	   the watcher list.  So you can add and remove users from the
+	   IPMI interface, send messages, etc., but you cannot add
+	   or remove SMI watchers or SMI interfaces. */
+	void (*new_smi)(int if_num);
+	void (*smi_gone)(int if_num);
+};
+
+int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
+int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
+
+/* The following are various helper functions for dealing with IPMI
+   addresses. */
+
+/* Return the maximum length of an IPMI address given it's type. */
+unsigned int ipmi_addr_length(int addr_type);
+
+/* Validate that the given IPMI address is valid. */
+int ipmi_validate_addr(struct ipmi_addr *addr, int len);
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data.  select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back.  You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report.  You will only receive reponses for commands you
+ * send.  Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type.  When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel.  You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req
+{
+	unsigned char __user *addr; /* Address to send the message to. */
+	unsigned int  addr_len;
+
+	long    msgid; /* The sequence number for the message.  This
+			  exact value will be reported back in the
+			  response to this request if it is a command.
+			  If it is a response, this will be used as
+			  the sequence value for the response.  */
+
+	struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces.  error values are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
+					     struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+   format. */
+struct ipmi_req_settime
+{
+	struct ipmi_req req;
+
+	/* See ipmi_request_settime() above for details on these
+           values. */
+	int          retries;
+	unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters.  error values
+ * are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
+					     struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv
+{
+	int     recv_type; /* Is this a command, response or an
+			      asyncronous event. */
+
+	unsigned char __user *addr;    /* Address the message was from is put
+				   here.  The caller must supply the
+				   memory. */
+	unsigned int  addr_len; /* The size of the address buffer.
+				   The caller supplies the full buffer
+				   length, this value is updated to
+				   the actual message length when the
+				   message is received. */
+
+	long    msgid; /* The sequence number specified in the request
+			  if this is a response.  If this is a command,
+			  this will be the sequence number from the
+			  command. */
+
+	struct ipmi_msg msg; /* The data field must point to a buffer.
+				The data_size field must be set to the
+				size of the message buffer.  The
+				caller supplies the full buffer
+				length, this value is updated to the
+				actual message length when the message
+				is received. */
+};
+
+/*
+ * Receive a message.  error values:
+ *  - EAGAIN - no messages in the queue.
+ *  - EFAULT - an address supplied was invalid.
+ *  - EINVAL - The address supplied was not valid.
+ *  - EMSGSIZE - The message to was too large to fit into the message buffer,
+ *               the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
+					      struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
+					      struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec
+{
+	unsigned char netfn;
+	unsigned char cmd;
+};
+
+/* 
+ * Register to receive a specific command.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - The netfn/cmd supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
+					     struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
+					     struct ipmi_cmdspec)
+
+/* 
+ * Set whether this interface receives events.  Note that the first
+ * user registered for events will get all pending events for the
+ * interface.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages.  Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface.  This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else.  You should probably leave the LUN alone.
+ */
+#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface.  You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms
+{
+	int          retries;
+	unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
+					     struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
+					     struct ipmi_timing_parms)
+
+#endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
new file mode 100644
index 000000000000..03bc64dc2ec1
--- /dev/null
+++ b/include/linux/ipmi_msgdefs.h
@@ -0,0 +1,101 @@
+/*
+ * ipmi_smi.h
+ *
+ * MontaVista IPMI system management interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_MSGDEFS_H
+#define __LINUX_IPMI_MSGDEFS_H
+
+/* Various definitions for IPMI messages used by almost everything in
+   the IPMI stack. */
+
+/* NetFNs and commands used inside the IPMI stack. */
+
+#define IPMI_NETFN_SENSOR_EVENT_REQUEST		0x04
+#define IPMI_NETFN_SENSOR_EVENT_RESPONSE	0x05
+#define IPMI_GET_EVENT_RECEIVER_CMD	0x01
+
+#define IPMI_NETFN_APP_REQUEST			0x06
+#define IPMI_NETFN_APP_RESPONSE			0x07
+#define IPMI_GET_DEVICE_ID_CMD		0x01
+#define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
+#define IPMI_GET_MSG_FLAGS_CMD		0x31
+#define IPMI_SEND_MSG_CMD		0x34
+#define IPMI_GET_MSG_CMD		0x33
+#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD	0x2e
+#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
+#define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
+#define IPMI_GET_CHANNEL_INFO_CMD	0x42
+
+#define IPMI_NETFN_STORAGE_REQUEST		0x0a
+#define IPMI_NETFN_STORAGE_RESPONSE		0x0b
+#define IPMI_ADD_SEL_ENTRY_CMD		0x44
+
+/* The default slave address */
+#define IPMI_BMC_SLAVE_ADDR	0x20
+
+/* The BT interface on high-end HP systems supports up to 255 bytes in
+ * one transfer.  Its "virtual" BMC supports some commands that are longer
+ * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
+ * some overhead.  It would be nice to base this on the "BT Capabilities"
+ * but that's too hard to propagate to the rest of the driver. */
+#define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
+
+#define IPMI_CC_NO_ERROR		0x00
+#define IPMI_NODE_BUSY_ERR		0xc0
+#define IPMI_INVALID_COMMAND_ERR	0xc1
+#define IPMI_ERR_MSG_TRUNCATED		0xc6
+#define IPMI_LOST_ARBITRATION_ERR	0x81
+#define IPMI_ERR_UNSPECIFIED		0xff
+
+#define IPMI_CHANNEL_PROTOCOL_IPMB	1
+#define IPMI_CHANNEL_PROTOCOL_ICMB	2
+#define IPMI_CHANNEL_PROTOCOL_SMBUS	4
+#define IPMI_CHANNEL_PROTOCOL_KCS	5
+#define IPMI_CHANNEL_PROTOCOL_SMIC	6
+#define IPMI_CHANNEL_PROTOCOL_BT10	7
+#define IPMI_CHANNEL_PROTOCOL_BT15	8
+#define IPMI_CHANNEL_PROTOCOL_TMODE	9
+
+#define IPMI_CHANNEL_MEDIUM_IPMB	1
+#define IPMI_CHANNEL_MEDIUM_ICMB10	2
+#define IPMI_CHANNEL_MEDIUM_ICMB09	3
+#define IPMI_CHANNEL_MEDIUM_8023LAN	4
+#define IPMI_CHANNEL_MEDIUM_ASYNC	5
+#define IPMI_CHANNEL_MEDIUM_OTHER_LAN	6
+#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS	7
+#define IPMI_CHANNEL_MEDIUM_SMBUS1	8
+#define IPMI_CHANNEL_MEDIUM_SMBUS2	9
+#define IPMI_CHANNEL_MEDIUM_USB1	10
+#define IPMI_CHANNEL_MEDIUM_USB2	11
+#define IPMI_CHANNEL_MEDIUM_SYSINTF	12
+
+#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
new file mode 100644
index 000000000000..e36ee157ad67
--- /dev/null
+++ b/include/linux/ipmi_smi.h
@@ -0,0 +1,156 @@
+/*
+ * ipmi_smi.h
+ *
+ * MontaVista IPMI system management interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_SMI_H
+#define __LINUX_IPMI_SMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/proc_fs.h>
+#include <linux/module.h>
+
+/* This files describes the interface for IPMI system management interface
+   drivers to bind into the IPMI message handler. */
+
+/* Structure for the low-level drivers. */
+typedef struct ipmi_smi *ipmi_smi_t;
+
+/*
+ * Messages to/from the lower layer.  The smi interface will take one
+ * of these to send. After the send has occurred and a response has
+ * been received, it will report this same data structure back up to
+ * the upper layer.  If an error occurs, it should fill in the
+ * response with an error code in the completion code location. When
+ * asynchronous data is received, one of these is allocated, the
+ * data_size is set to zero and the response holds the data from the
+ * get message or get event command that the interface initiated.
+ * Note that it is the interfaces responsibility to detect
+ * asynchronous data and messages and request them from the
+ * interface.
+ */
+struct ipmi_smi_msg
+{
+	struct list_head link;
+
+	long    msgid;
+	void    *user_data;
+
+	int           data_size;
+	unsigned char data[IPMI_MAX_MSG_LENGTH];
+
+	int           rsp_size;
+	unsigned char rsp[IPMI_MAX_MSG_LENGTH];
+
+	/* Will be called when the system is done with the message
+           (presumably to free it). */
+	void (*done)(struct ipmi_smi_msg *msg);
+};
+
+struct ipmi_smi_handlers
+{
+	struct module *owner;
+
+	/* Called to enqueue an SMI message to be sent.  This
+	   operation is not allowed to fail.  If an error occurs, it
+	   should report back the error in a received message.  It may
+	   do this in the current call context, since no write locks
+	   are held when this is run.  If the priority is > 0, the
+	   message will go into a high-priority queue and be sent
+	   first.  Otherwise, it goes into a normal-priority queue. */
+	void (*sender)(void                *send_info,
+		       struct ipmi_smi_msg *msg,
+		       int                 priority);
+
+	/* Called by the upper layer to request that we try to get
+	   events from the BMC we are attached to. */
+	void (*request_events)(void *send_info);
+
+	/* Called when the interface should go into "run to
+	   completion" mode.  If this call sets the value to true, the
+	   interface should make sure that all messages are flushed
+	   out and that none are pending, and any new requests are run
+	   to completion immediately. */
+	void (*set_run_to_completion)(void *send_info, int run_to_completion);
+
+	/* Called to poll for work to do.  This is so upper layers can
+	   poll for operations during things like crash dumps. */
+	void (*poll)(void *send_info);
+
+	/* Tell the handler that we are using it/not using it.  The
+	   message handler get the modules that this handler belongs
+	   to; this function lets the SMI claim any modules that it
+	   uses.  These may be NULL if this is not required. */
+	int (*inc_usecount)(void *send_info);
+	void (*dec_usecount)(void *send_info);
+};
+
+/* Add a low-level interface to the IPMI driver.  Note that if the
+   interface doesn't know its slave address, it should pass in zero. */
+int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
+		      void                     *send_info,
+		      unsigned char            version_major,
+		      unsigned char            version_minor,
+		      unsigned char            slave_addr,
+		      ipmi_smi_t               *intf);
+
+/*
+ * Remove a low-level interface from the IPMI driver.  This will
+ * return an error if the interface is still in use by a user.
+ */
+int ipmi_unregister_smi(ipmi_smi_t intf);
+
+/*
+ * The lower layer reports received messages through this interface.
+ * The data_size should be zero if this is an asyncronous message.  If
+ * the lower layer gets an error sending a message, it should format
+ * an error response in the message response.
+ */
+void ipmi_smi_msg_received(ipmi_smi_t          intf,
+			   struct ipmi_smi_msg *msg);
+
+/* The lower layer received a watchdog pre-timeout on interface. */
+void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf);
+
+struct ipmi_smi_msg *ipmi_alloc_smi_msg(void);
+static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg)
+{
+	msg->done(msg);
+}
+
+/* Allow the lower layer to add things to the proc filesystem
+   directory for this interface.  Note that the entry will
+   automatically be dstroyed when the interface is destroyed. */
+int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
+			    read_proc_t *read_proc, write_proc_t *write_proc,
+			    void *data, struct module *owner);
+
+#endif /* __LINUX_IPMI_SMI_H */
diff --git a/include/linux/ipsec.h b/include/linux/ipsec.h
new file mode 100644
index 000000000000..d3c527616b5e
--- /dev/null
+++ b/include/linux/ipsec.h
@@ -0,0 +1,46 @@
+#ifndef _LINUX_IPSEC_H
+#define _LINUX_IPSEC_H
+
+/* The definitions, required to talk to KAME racoon IKE. */
+
+#include <linux/pfkeyv2.h>
+
+#define IPSEC_PORT_ANY		0
+#define IPSEC_ULPROTO_ANY	255
+#define IPSEC_PROTO_ANY		255
+
+enum {
+	IPSEC_MODE_ANY		= 0,	/* We do not support this for SA */
+	IPSEC_MODE_TRANSPORT	= 1,
+	IPSEC_MODE_TUNNEL	= 2
+};
+
+enum {
+	IPSEC_DIR_ANY		= 0,
+	IPSEC_DIR_INBOUND	= 1,
+	IPSEC_DIR_OUTBOUND	= 2,
+	IPSEC_DIR_FWD		= 3,	/* It is our own */
+	IPSEC_DIR_MAX		= 4,
+	IPSEC_DIR_INVALID	= 5
+};
+
+enum {
+	IPSEC_POLICY_DISCARD	= 0,
+	IPSEC_POLICY_NONE	= 1,
+	IPSEC_POLICY_IPSEC	= 2,
+	IPSEC_POLICY_ENTRUST	= 3,
+	IPSEC_POLICY_BYPASS	= 4
+};
+
+enum {
+	IPSEC_LEVEL_DEFAULT	= 0,
+	IPSEC_LEVEL_USE		= 1,
+	IPSEC_LEVEL_REQUIRE	= 2,
+	IPSEC_LEVEL_UNIQUE	= 3
+};
+
+#define IPSEC_MANUAL_REQID_MAX	0x3fff
+
+#define IPSEC_REPLAYWSIZE  32
+
+#endif	/* _LINUX_IPSEC_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
new file mode 100644
index 000000000000..ab0d0efbf240
--- /dev/null
+++ b/include/linux/ipv6.h
@@ -0,0 +1,316 @@
+#ifndef _IPV6_H
+#define _IPV6_H
+
+#include <linux/config.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU	1280
+
+/*
+ *	Advanced API
+ *	source interface/address selection, source routing, etc...
+ *	*under construction*
+ */
+
+
+struct in6_pktinfo {
+	struct in6_addr	ipi6_addr;
+	int		ipi6_ifindex;
+};
+
+
+struct in6_ifreq {
+	struct in6_addr	ifr6_addr;
+	__u32		ifr6_prefixlen;
+	int		ifr6_ifindex; 
+};
+
+#define IPV6_SRCRT_STRICT	0x01	/* this hop must be a neighbor	*/
+#define IPV6_SRCRT_TYPE_0	0	/* IPv6 type 0 Routing Header	*/
+
+/*
+ *	routing header
+ */
+struct ipv6_rt_hdr {
+	__u8		nexthdr;
+	__u8		hdrlen;
+	__u8		type;
+	__u8		segments_left;
+
+	/*
+	 *	type specific data
+	 *	variable length field
+	 */
+};
+
+
+struct ipv6_opt_hdr {
+	__u8 		nexthdr;
+	__u8 		hdrlen;
+	/* 
+	 * TLV encoded option data follows.
+	 */
+};
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr  ipv6_opt_hdr
+
+#ifdef __KERNEL__
+#define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
+#endif
+
+/*
+ *	routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			bitmap;		/* strict/loose bit map */
+	struct in6_addr		addr[0];
+
+#define rt0_type		rt_hdr.type
+};
+
+struct ipv6_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;           /* This one is measured in 32 bit units! */
+	__u16 reserved;
+	__u32 spi;
+	__u32 seq_no;           /* Sequence number */
+	__u8  auth_data[0];     /* Length variable but >=4. Mind the 64 bit alignment! */
+};
+
+struct ipv6_esp_hdr {
+	__u32 spi;
+	__u32 seq_no;           /* Sequence number */
+	__u8  enc_data[0];      /* Length variable but >=8. Mind the 64 bit alignment! */
+};
+
+struct ipv6_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__u16 cpi;
+};
+
+/*
+ *	IPv6 fixed header
+ *
+ *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ *	are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			priority:4,
+				version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			version:4,
+				priority:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8			flow_lbl[3];
+
+	__u16			payload_len;
+	__u8			nexthdr;
+	__u8			hop_limit;
+
+	struct	in6_addr	saddr;
+	struct	in6_addr	daddr;
+};
+
+/*
+ * This structure contains configuration options per IPv6 link.
+ */
+struct ipv6_devconf {
+	__s32		forwarding;
+	__s32		hop_limit;
+	__s32		mtu6;
+	__s32		accept_ra;
+	__s32		accept_redirects;
+	__s32		autoconf;
+	__s32		dad_transmits;
+	__s32		rtr_solicits;
+	__s32		rtr_solicit_interval;
+	__s32		rtr_solicit_delay;
+	__s32		force_mld_version;
+#ifdef CONFIG_IPV6_PRIVACY
+	__s32		use_tempaddr;
+	__s32		temp_valid_lft;
+	__s32		temp_prefered_lft;
+	__s32		regen_max_retry;
+	__s32		max_desync_factor;
+#endif
+	__s32		max_addresses;
+	void		*sysctl;
+};
+
+/* index values for the variables in ipv6_devconf */
+enum {
+	DEVCONF_FORWARDING = 0,
+	DEVCONF_HOPLIMIT,
+	DEVCONF_MTU6,
+	DEVCONF_ACCEPT_RA,
+	DEVCONF_ACCEPT_REDIRECTS,
+	DEVCONF_AUTOCONF,
+	DEVCONF_DAD_TRANSMITS,
+	DEVCONF_RTR_SOLICITS,
+	DEVCONF_RTR_SOLICIT_INTERVAL,
+	DEVCONF_RTR_SOLICIT_DELAY,
+	DEVCONF_USE_TEMPADDR,
+	DEVCONF_TEMP_VALID_LFT,
+	DEVCONF_TEMP_PREFERED_LFT,
+	DEVCONF_REGEN_MAX_RETRY,
+	DEVCONF_MAX_DESYNC_FACTOR,
+	DEVCONF_MAX_ADDRESSES,
+	DEVCONF_FORCE_MLD_VERSION,
+	DEVCONF_MAX
+};
+
+#ifdef __KERNEL__
+#include <linux/in6.h>          /* struct sockaddr_in6 */
+#include <linux/icmpv6.h>
+#include <net/if_inet6.h>       /* struct ipv6_mc_socklist */
+#include <linux/tcp.h>
+#include <linux/udp.h>
+
+/* 
+   This structure contains results of exthdrs parsing
+   as offsets from skb->nh.
+ */
+
+struct inet6_skb_parm {
+	int			iif;
+	__u16			ra;
+	__u16			hop;
+	__u16			dst0;
+	__u16			srcrt;
+	__u16			dst1;
+};
+
+#define IP6CB(skb)	((struct inet6_skb_parm*)((skb)->cb))
+
+/**
+ * struct ipv6_pinfo - ipv6 private area
+ *
+ * In the struct sock hierarchy (tcp6_sock, upd6_sock, etc)
+ * this _must_ be the last member, so that inet6_sk_generic
+ * is able to calculate its offset from the base struct sock
+ * by using the struct proto->slab_obj_size member. -acme
+ */
+struct ipv6_pinfo {
+	struct in6_addr 	saddr;
+	struct in6_addr 	rcv_saddr;
+	struct in6_addr		daddr;
+	struct in6_addr		*daddr_cache;
+
+	__u32			flow_label;
+	__u32			frag_size;
+	__s16			hop_limit;
+	__s16			mcast_hops;
+	int			mcast_oif;
+
+	/* pktoption flags */
+	union {
+		struct {
+			__u8	srcrt:2,
+			        rxinfo:1,
+				rxhlim:1,
+				hopopts:1,
+				dstopts:1,
+                                rxflow:1;
+		} bits;
+		__u8		all;
+	} rxopt;
+
+	/* sockopt flags */
+	__u8			mc_loop:1,
+	                        recverr:1,
+	                        sndflow:1,
+				pmtudisc:2,
+				ipv6only:1;
+
+	__u32			dst_cookie;
+
+	struct ipv6_mc_socklist	*ipv6_mc_list;
+	struct ipv6_ac_socklist	*ipv6_ac_list;
+	struct ipv6_fl_socklist *ipv6_fl_list;
+
+	struct ipv6_txoptions	*opt;
+	struct sk_buff		*pktoptions;
+	struct {
+		struct ipv6_txoptions *opt;
+		struct rt6_info	*rt;
+		int hop_limit;
+	} cork;
+};
+
+/* WARNING: don't change the layout of the members in {raw,udp,tcp}6_sock! */
+struct raw6_sock {
+	/* inet_sock has to be the first member of raw6_sock */
+	struct inet_sock	inet;
+	__u32			checksum;	/* perform checksum */
+	__u32			offset;		/* checksum offset  */
+	struct icmp6_filter	filter;
+	/* ipv6_pinfo has to be the last member of raw6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo	inet6;
+};
+
+struct udp6_sock {
+	struct udp_sock	  udp;
+	/* ipv6_pinfo has to be the last member of udp6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo inet6;
+};
+
+struct tcp6_sock {
+	struct tcp_sock	  tcp;
+	/* ipv6_pinfo has to be the last member of tcp6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo inet6;
+};
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
+{
+	return inet_sk(__sk)->pinet6;
+}
+
+static inline struct raw6_sock *raw6_sk(const struct sock *sk)
+{
+	return (struct raw6_sock *)sk;
+}
+
+static inline void inet_sk_copy_descendant(struct sock *sk_to,
+					   const struct sock *sk_from)
+{
+	int ancestor_size = sizeof(struct inet_sock);
+
+	if (sk_from->sk_family == PF_INET6)
+		ancestor_size += sizeof(struct ipv6_pinfo);
+
+	__inet_sk_copy_descendant(sk_to, sk_from, ancestor_size);
+}
+
+#define __ipv6_only_sock(sk)	(inet6_sk(sk)->ipv6only)
+#define ipv6_only_sock(sk)	((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk))
+#else
+#define __ipv6_only_sock(sk)	0
+#define ipv6_only_sock(sk)	0
+
+static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
+{
+	return NULL;
+}
+
+static inline struct raw6_sock *raw6_sk(const struct sock *sk)
+{
+	return NULL;
+}
+
+#endif
+
+#endif
+
+#endif
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
new file mode 100644
index 000000000000..e2f935038013
--- /dev/null
+++ b/include/linux/ipv6_route.h
@@ -0,0 +1,49 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IPV6_ROUTE_H
+#define _LINUX_IPV6_ROUTE_H
+
+#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
+#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
+					   fallback, no routers on link */
+#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
+#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
+
+#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
+#define RTF_EXPIRES	0x00400000
+
+#define RTF_CACHE	0x01000000	/* cache entry			*/
+#define RTF_FLOW	0x02000000	/* flow significant route	*/
+#define RTF_POLICY	0x04000000	/* policy route			*/
+
+#define RTF_LOCAL	0x80000000
+
+struct in6_rtmsg {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	__u32			rtmsg_type;
+	__u16			rtmsg_dst_len;
+	__u16			rtmsg_src_len;
+	__u32			rtmsg_metric;
+	unsigned long		rtmsg_info;
+        __u32			rtmsg_flags;
+	int			rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE		0x11
+#define RTMSG_DELDEVICE		0x12
+#define RTMSG_NEWROUTE		0x21
+#define RTMSG_DELROUTE		0x22
+
+#endif
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
new file mode 100644
index 000000000000..4f29c60964c4
--- /dev/null
+++ b/include/linux/ipx.h
@@ -0,0 +1,74 @@
+#ifndef _IPX_H_
+#define _IPX_H_
+#include <linux/sockios.h>
+#include <linux/socket.h>
+#define IPX_NODE_LEN	6
+#define IPX_MTU		576
+
+struct sockaddr_ipx {
+	sa_family_t	sipx_family;
+	__u16		sipx_port;
+	__u32		sipx_network;
+	unsigned char 	sipx_node[IPX_NODE_LEN];
+	__u8		sipx_type;
+	unsigned char	sipx_zero;	/* 16 byte fill */
+};
+
+/*
+ * So we can fit the extra info for SIOCSIFADDR into the address nicely
+ */
+#define sipx_special	sipx_port
+#define sipx_action	sipx_zero
+#define IPX_DLTITF	0
+#define IPX_CRTITF	1
+
+struct ipx_route_definition {
+	__u32         ipx_network;
+	__u32         ipx_router_network;
+	unsigned char ipx_router_node[IPX_NODE_LEN];
+};
+
+struct ipx_interface_definition {
+	__u32         ipx_network;
+	unsigned char ipx_device[16];
+	unsigned char ipx_dlink_type;
+#define IPX_FRAME_NONE		0
+#define IPX_FRAME_SNAP		1
+#define IPX_FRAME_8022		2
+#define IPX_FRAME_ETHERII	3
+#define IPX_FRAME_8023		4
+#define IPX_FRAME_TR_8022       5 /* obsolete */
+	unsigned char ipx_special;
+#define IPX_SPECIAL_NONE	0
+#define IPX_PRIMARY		1
+#define IPX_INTERNAL		2
+	unsigned char ipx_node[IPX_NODE_LEN];
+};
+	
+struct ipx_config_data {
+	unsigned char	ipxcfg_auto_select_primary;
+	unsigned char	ipxcfg_auto_create_interfaces;
+};
+
+/*
+ * OLD Route Definition for backward compatibility.
+ */
+
+struct ipx_route_def {
+	__u32		ipx_network;
+	__u32		ipx_router_network;
+#define IPX_ROUTE_NO_ROUTER	0
+	unsigned char	ipx_router_node[IPX_NODE_LEN];
+	unsigned char	ipx_device[16];
+	unsigned short	ipx_flags;
+#define IPX_RT_SNAP		8
+#define IPX_RT_8022		4
+#define IPX_RT_BLUEBOOK		2
+#define IPX_RT_ROUTED		1
+};
+
+#define SIOCAIPXITFCRT		(SIOCPROTOPRIVATE)
+#define SIOCAIPXPRISLT		(SIOCPROTOPRIVATE + 1)
+#define SIOCIPXCFGDATA		(SIOCPROTOPRIVATE + 2)
+#define SIOCIPXNCPCONN		(SIOCPROTOPRIVATE + 3)
+#endif /* _IPX_H_ */
diff --git a/include/linux/irda.h b/include/linux/irda.h
new file mode 100644
index 000000000000..95dee174cdc5
--- /dev/null
+++ b/include/linux/irda.h
@@ -0,0 +1,222 @@
+/*********************************************************************
+ *                
+ * Filename:      irda.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Mar  8 14:06:12 1999
+ * Modified at:   Sat Dec 25 16:06:42 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef KERNEL_IRDA_H
+#define KERNEL_IRDA_H
+
+/* Please do *not* add any #include in this file, this file is
+ * included as-is in user space.
+ * Please fix the calling file to properly included needed files before
+ * this one, or preferably to include <net/irda/irda.h> instead.
+ * Jean II */
+
+/* Hint bit positions for first hint byte */
+#define HINT_PNP         0x01
+#define HINT_PDA         0x02
+#define HINT_COMPUTER    0x04
+#define HINT_PRINTER     0x08
+#define HINT_MODEM       0x10
+#define HINT_FAX         0x20
+#define HINT_LAN         0x40
+#define HINT_EXTENSION   0x80
+
+/* Hint bit positions for second hint byte (first extension byte) */
+#define HINT_TELEPHONY   0x01
+#define HINT_FILE_SERVER 0x02
+#define HINT_COMM        0x04
+#define HINT_MESSAGE     0x08
+#define HINT_HTTP        0x10
+#define HINT_OBEX        0x20
+
+/* IrLMP character code values */
+#define CS_ASCII         0x00
+#define	CS_ISO_8859_1    0x01
+#define	CS_ISO_8859_2    0x02
+#define	CS_ISO_8859_3    0x03
+#define	CS_ISO_8859_4    0x04
+#define	CS_ISO_8859_5    0x05
+#define	CS_ISO_8859_6    0x06
+#define	CS_ISO_8859_7    0x07
+#define	CS_ISO_8859_8    0x08
+#define	CS_ISO_8859_9    0x09
+#define CS_UNICODE       0xff
+
+/* These are the currently known dongles */
+typedef enum {
+	IRDA_TEKRAM_DONGLE       = 0,
+	IRDA_ESI_DONGLE          = 1,
+	IRDA_ACTISYS_DONGLE      = 2,
+	IRDA_ACTISYS_PLUS_DONGLE = 3,
+	IRDA_GIRBIL_DONGLE       = 4,
+	IRDA_LITELINK_DONGLE     = 5,
+	IRDA_AIRPORT_DONGLE      = 6,
+	IRDA_OLD_BELKIN_DONGLE   = 7,
+	IRDA_EP7211_IR           = 8,
+	IRDA_MCP2120_DONGLE      = 9,
+	IRDA_ACT200L_DONGLE      = 10,
+	IRDA_MA600_DONGLE        = 11,
+} IRDA_DONGLE;
+
+/* Protocol types to be used for SOCK_DGRAM */
+enum {
+	IRDAPROTO_UNITDATA = 0,
+	IRDAPROTO_ULTRA    = 1,
+	IRDAPROTO_MAX
+};
+
+#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
+#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
+
+#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
+#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
+#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
+#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
+#define IRLMP_QOS_SET            5
+#define IRLMP_QOS_GET            6
+#define IRLMP_MAX_SDU_SIZE       7
+#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
+#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
+#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
+#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
+
+#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
+
+#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
+#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
+#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
+/* For user space backward compatibility - may be fixed in kernel 2.5.X
+ * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
+#define IAS_EXPORT_CLASSNAME       64
+#define IAS_EXPORT_ATTRIBNAME     256
+
+/* Attribute type needed for struct irda_ias_set */
+#define IAS_MISSING 0
+#define IAS_INTEGER 1
+#define IAS_OCT_SEQ 2
+#define IAS_STRING  3
+
+#define LSAP_ANY              0xff
+
+struct sockaddr_irda {
+	sa_family_t sir_family;   /* AF_IRDA */
+	__u8        sir_lsap_sel; /* LSAP selector */
+	__u32       sir_addr;     /* Device address */
+	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
+};
+
+struct irda_device_info {
+	__u32       saddr;    /* Address of local interface */
+	__u32       daddr;    /* Address of remote device */
+	char        info[22]; /* Description */
+	__u8        charset;  /* Charset used for description */
+	__u8        hints[2]; /* Hint bits */
+};
+
+struct irda_device_list {
+       __u32 len;
+       struct irda_device_info dev[1];
+};
+
+struct irda_ias_set {
+	char irda_class_name[IAS_EXPORT_CLASSNAME];
+	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
+	unsigned int irda_attrib_type;
+	union {
+		unsigned int irda_attrib_int;
+		struct {
+			unsigned short len;
+			__u8 octet_seq[IAS_MAX_OCTET_STRING];
+		} irda_attrib_octet_seq;
+		struct {
+			__u8 len;
+			__u8 charset;
+			__u8 string[IAS_MAX_STRING];
+		} irda_attrib_string;
+	} attribute;
+	__u32       daddr;    /* Address of device (for some queries only) */
+};
+
+/* Some private IOCTL's (max 16) */
+#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
+#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
+#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
+#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
+#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
+#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
+#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
+#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
+#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
+#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
+
+/* No reason to include <linux/if.h> just because of this one ;-) */
+#define IRNAMSIZ 16 
+
+/* IrDA quality of service information (must not exceed 16 bytes) */
+struct if_irda_qos {
+	unsigned long  baudrate;
+	unsigned short data_size;
+	unsigned short window_size;
+	unsigned short min_turn_time;
+	unsigned short max_turn_time;
+	unsigned char  add_bofs;
+	unsigned char  link_disc;
+};
+
+/* For setting RTS and DTR lines of a dongle */
+struct if_irda_line {
+	__u8 dtr;
+	__u8 rts;
+};
+
+/* IrDA interface configuration (data part must not exceed 16 bytes) */
+struct if_irda_req {
+	union {
+		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
+	} ifr_ifrn;
+	
+	/* Data part */
+	union {
+		struct if_irda_line ifru_line;
+		struct if_irda_qos  ifru_qos;
+		unsigned short      ifru_flags;
+		unsigned int        ifru_receiving;
+		unsigned int        ifru_mode;
+		unsigned int        ifru_dongle;
+	} ifr_ifru;
+};
+
+#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
+#define ifr_receiving ifr_ifru.ifru_receiving 
+#define ifr_dongle    ifr_ifru.ifru_dongle
+#define ifr_mode      ifr_ifru.ifru_mode
+#define ifr_dtr       ifr_ifru.ifru_line.dtr
+#define ifr_rts       ifr_ifru.ifru_line.rts
+
+#endif /* KERNEL_IRDA_H */
+
+
+
+
diff --git a/include/linux/irq.h b/include/linux/irq.h
new file mode 100644
index 000000000000..c3ff4d101667
--- /dev/null
+++ b/include/linux/irq.h
@@ -0,0 +1,97 @@
+#ifndef __irq_h
+#define __irq_h
+
+/*
+ * Please do not include this file in generic code.  There is currently
+ * no requirement for any architecture to implement anything held
+ * within this file.
+ *
+ * Thanks. --rmk
+ */
+
+#include <linux/config.h>
+
+#if !defined(CONFIG_ARCH_S390)
+
+#include <linux/linkage.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+
+/*
+ * IRQ line status.
+ */
+#define IRQ_INPROGRESS	1	/* IRQ handler active - do not enter! */
+#define IRQ_DISABLED	2	/* IRQ disabled - do not enter! */
+#define IRQ_PENDING	4	/* IRQ pending - replay on enable */
+#define IRQ_REPLAY	8	/* IRQ has been replayed but not acked yet */
+#define IRQ_AUTODETECT	16	/* IRQ is being autodetected */
+#define IRQ_WAITING	32	/* IRQ not yet seen - for autodetection */
+#define IRQ_LEVEL	64	/* IRQ level triggered */
+#define IRQ_MASKED	128	/* IRQ masked - shouldn't be seen again */
+#define IRQ_PER_CPU	256	/* IRQ is per CPU */
+
+/*
+ * Interrupt controller descriptor. This is all we need
+ * to describe about the low-level hardware. 
+ */
+struct hw_interrupt_type {
+	const char * typename;
+	unsigned int (*startup)(unsigned int irq);
+	void (*shutdown)(unsigned int irq);
+	void (*enable)(unsigned int irq);
+	void (*disable)(unsigned int irq);
+	void (*ack)(unsigned int irq);
+	void (*end)(unsigned int irq);
+	void (*set_affinity)(unsigned int irq, cpumask_t dest);
+};
+
+typedef struct hw_interrupt_type  hw_irq_controller;
+
+/*
+ * This is the "IRQ descriptor", which contains various information
+ * about the irq, including what kind of hardware handling it has,
+ * whether it is disabled etc etc.
+ *
+ * Pad this out to 32 bytes for cache and indexing reasons.
+ */
+typedef struct irq_desc {
+	hw_irq_controller *handler;
+	void *handler_data;
+	struct irqaction *action;	/* IRQ action list */
+	unsigned int status;		/* IRQ status */
+	unsigned int depth;		/* nested irq disables */
+	unsigned int irq_count;		/* For detecting broken interrupts */
+	unsigned int irqs_unhandled;
+	spinlock_t lock;
+} ____cacheline_aligned irq_desc_t;
+
+extern irq_desc_t irq_desc [NR_IRQS];
+
+#include <asm/hw_irq.h> /* the arch dependent stuff */
+
+extern int setup_irq(unsigned int irq, struct irqaction * new);
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+extern cpumask_t irq_affinity[NR_IRQS];
+extern int no_irq_affinity;
+extern int noirqdebug_setup(char *str);
+
+extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
+				       struct irqaction *action);
+extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
+extern void note_interrupt(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern void report_bad_irq(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern int can_request_irq(unsigned int irq, unsigned long irqflags);
+
+extern void init_irq_proc(void);
+#endif
+
+extern hw_irq_controller no_irq_type;  /* needed in every arch ? */
+
+#endif
+
+#endif /* __irq_h */
diff --git a/include/linux/irq_cpustat.h b/include/linux/irq_cpustat.h
new file mode 100644
index 000000000000..af93505ec2ec
--- /dev/null
+++ b/include/linux/irq_cpustat.h
@@ -0,0 +1,32 @@
+#ifndef __irq_cpustat_h
+#define __irq_cpustat_h
+
+/*
+ * Contains default mappings for irq_cpustat_t, used by almost every
+ * architecture.  Some arch (like s390) have per cpu hardware pages and
+ * they define their own mappings for irq_stat.
+ *
+ * Keith Owens <kaos@ocs.com.au> July 2000.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Simple wrappers reducing source bloat.  Define all irq_stat fields
+ * here, even ones that are arch dependent.  That way we get common
+ * definitions instead of differing sets for each arch.
+ */
+
+#ifndef __ARCH_IRQ_STAT
+extern irq_cpustat_t irq_stat[];		/* defined in asm/hardirq.h */
+#define __IRQ_STAT(cpu, member)	(irq_stat[cpu].member)
+#endif
+
+  /* arch independent irq_stat fields */
+#define local_softirq_pending() \
+	__IRQ_STAT(smp_processor_id(), __softirq_pending)
+
+  /* arch dependent irq_stat fields */
+#define nmi_count(cpu)		__IRQ_STAT((cpu), __nmi_count)	/* i386 */
+
+#endif	/* __irq_cpustat_h */
diff --git a/include/linux/isapnp.h b/include/linux/isapnp.h
new file mode 100644
index 000000000000..26c64c286f42
--- /dev/null
+++ b/include/linux/isapnp.h
@@ -0,0 +1,142 @@
+/*
+ *  ISA Plug & Play support
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef LINUX_ISAPNP_H
+#define LINUX_ISAPNP_H
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/pnp.h>
+
+/*
+ *  Configuration registers (TODO: change by specification)
+ */ 
+
+#define ISAPNP_CFG_ACTIVATE		0x30	/* byte */
+#define ISAPNP_CFG_MEM			0x40	/* 4 * dword */
+#define ISAPNP_CFG_PORT			0x60	/* 8 * word */
+#define ISAPNP_CFG_IRQ			0x70	/* 2 * word */
+#define ISAPNP_CFG_DMA			0x74	/* 2 * byte */
+
+/*
+ *
+ */
+
+#define ISAPNP_VENDOR(a,b,c)	(((((a)-'A'+1)&0x3f)<<2)|\
+				((((b)-'A'+1)&0x18)>>3)|((((b)-'A'+1)&7)<<13)|\
+				((((c)-'A'+1)&0x1f)<<8))
+#define ISAPNP_DEVICE(x)	((((x)&0xf000)>>8)|\
+				 (((x)&0x0f00)>>8)|\
+				 (((x)&0x00f0)<<8)|\
+				 (((x)&0x000f)<<8))
+#define ISAPNP_FUNCTION(x)	ISAPNP_DEVICE(x)
+
+/*
+ *
+ */
+
+#ifdef __KERNEL__
+
+#define DEVICE_COUNT_COMPATIBLE 4
+
+#define ISAPNP_ANY_ID		0xffff
+#define ISAPNP_CARD_DEVS	8
+
+#define ISAPNP_CARD_ID(_va, _vb, _vc, _device) \
+		.card_vendor = ISAPNP_VENDOR(_va, _vb, _vc), .card_device = ISAPNP_DEVICE(_device)
+#define ISAPNP_CARD_END \
+		.card_vendor = 0, .card_device = 0
+#define ISAPNP_DEVICE_ID(_va, _vb, _vc, _function) \
+		{ .vendor = ISAPNP_VENDOR(_va, _vb, _vc), .function = ISAPNP_FUNCTION(_function) }
+
+/* export used IDs outside module */
+#define ISAPNP_CARD_TABLE(name) \
+		MODULE_GENERIC_TABLE(isapnp_card, name)
+
+struct isapnp_card_id {
+	unsigned long driver_data;	/* data private to the driver */
+	unsigned short card_vendor, card_device;
+	struct {
+		unsigned short vendor, function;
+	} devs[ISAPNP_CARD_DEVS];	/* logical devices */
+};
+
+#define ISAPNP_DEVICE_SINGLE(_cva, _cvb, _cvc, _cdevice, _dva, _dvb, _dvc, _dfunction) \
+		.card_vendor = ISAPNP_VENDOR(_cva, _cvb, _cvc), .card_device =  ISAPNP_DEVICE(_cdevice), \
+		.vendor = ISAPNP_VENDOR(_dva, _dvb, _dvc), .function = ISAPNP_FUNCTION(_dfunction)
+#define ISAPNP_DEVICE_SINGLE_END \
+		.card_vendor = 0, .card_device = 0
+
+struct isapnp_device_id {
+	unsigned short card_vendor, card_device;
+	unsigned short vendor, function;
+	unsigned long driver_data;	/* data private to the driver */
+};
+
+#if defined(CONFIG_ISAPNP) || (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
+
+#define __ISAPNP__
+
+/* lowlevel configuration */
+int isapnp_present(void);
+int isapnp_cfg_begin(int csn, int device);
+int isapnp_cfg_end(void);
+unsigned char isapnp_read_byte(unsigned char idx);
+void isapnp_write_byte(unsigned char idx, unsigned char val);
+
+#ifdef CONFIG_PROC_FS
+int isapnp_proc_init(void);
+int isapnp_proc_done(void);
+#else
+static inline int isapnp_proc_init(void) { return 0; }
+static inline int isapnp_proc_done(void) { return 0; }
+#endif
+
+/* compat */
+struct pnp_card *pnp_find_card(unsigned short vendor,
+			       unsigned short device,
+			       struct pnp_card *from);
+struct pnp_dev *pnp_find_dev(struct pnp_card *card,
+			     unsigned short vendor,
+			     unsigned short function,
+			     struct pnp_dev *from);
+
+#else /* !CONFIG_ISAPNP */
+
+/* lowlevel configuration */
+static inline int isapnp_present(void) { return 0; }
+static inline int isapnp_cfg_begin(int csn, int device) { return -ENODEV; }
+static inline int isapnp_cfg_end(void) { return -ENODEV; }
+static inline unsigned char isapnp_read_byte(unsigned char idx) { return 0xff; }
+static inline void isapnp_write_byte(unsigned char idx, unsigned char val) { ; }
+
+static inline struct pnp_card *pnp_find_card(unsigned short vendor,
+					     unsigned short device,
+					     struct pnp_card *from) { return NULL; }
+static inline struct pnp_dev *pnp_find_dev(struct pnp_card *card,
+					   unsigned short vendor,
+					   unsigned short function,
+					   struct pnp_dev *from) { return NULL; }
+
+#endif /* CONFIG_ISAPNP */
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_ISAPNP_H */
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
new file mode 100644
index 000000000000..862083eb58ab
--- /dev/null
+++ b/include/linux/isdn.h
@@ -0,0 +1,638 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __ISDN_H__
+#define __ISDN_H__
+
+#include <linux/ioctl.h>
+
+#ifdef CONFIG_COBALT_MICRO_SERVER
+/* Save memory */
+#define ISDN_MAX_DRIVERS    2
+#define ISDN_MAX_CHANNELS   8
+#else
+#define ISDN_MAX_DRIVERS    32
+#define ISDN_MAX_CHANNELS   64
+#endif
+
+/* New ioctl-codes */
+#define IIOCNETAIF  _IO('I',1)
+#define IIOCNETDIF  _IO('I',2)
+#define IIOCNETSCF  _IO('I',3)
+#define IIOCNETGCF  _IO('I',4)
+#define IIOCNETANM  _IO('I',5)
+#define IIOCNETDNM  _IO('I',6)
+#define IIOCNETGNM  _IO('I',7)
+#define IIOCGETSET  _IO('I',8) /* no longer supported */
+#define IIOCSETSET  _IO('I',9) /* no longer supported */
+#define IIOCSETVER  _IO('I',10)
+#define IIOCNETHUP  _IO('I',11)
+#define IIOCSETGST  _IO('I',12)
+#define IIOCSETBRJ  _IO('I',13)
+#define IIOCSIGPRF  _IO('I',14)
+#define IIOCGETPRF  _IO('I',15)
+#define IIOCSETPRF  _IO('I',16)
+#define IIOCGETMAP  _IO('I',17)
+#define IIOCSETMAP  _IO('I',18)
+#define IIOCNETASL  _IO('I',19)
+#define IIOCNETDIL  _IO('I',20)
+#define IIOCGETCPS  _IO('I',21)
+#define IIOCGETDVR  _IO('I',22)
+#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN  _IO('I',32)
+#define IIOCNETDLN  _IO('I',33)
+
+#define IIOCNETGPN  _IO('I',34)
+
+#define IIOCDBGVAR  _IO('I',127)
+
+#define IIOCDRVCTL  _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER      0
+#define ISDN_NET_ENCAP_RAWIP      1
+#define ISDN_NET_ENCAP_IPTYP      2
+#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP    4
+#define ISDN_NET_ENCAP_UIHDLC     5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
+#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt*/
+#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE       0
+#define ISDN_USAGE_RAW        1
+#define ISDN_USAGE_MODEM      2
+#define ISDN_USAGE_NET        3
+#define ISDN_USAGE_VOICE      4
+#define ISDN_USAGE_FAX        5
+#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
+
+#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
+#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN          32
+#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
+#define TTY_DV 0x06  /* Data version for iprofd etc.          */
+
+#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
+
+typedef struct {
+  char drvid[25];
+  unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+  char name[10];
+  char phone[ISDN_MSNLEN];
+  int  outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+  char name[10];     /* Name of interface                     */
+  char master[10];   /* Name of Master for Bundling           */
+  char slave[10];    /* Name of Slave for Bundling            */
+  char eaz[256];     /* EAZ/MSN                               */
+  char drvid[25];    /* DriverId for Bindings                 */
+  int  onhtime;      /* Hangup-Timeout                        */
+  int  charge;       /* Charge-Units                          */
+  int  l2_proto;     /* Layer-2 protocol                      */
+  int  l3_proto;     /* Layer-3 protocol                      */
+  int  p_encap;      /* Encapsulation                         */
+  int  exclusive;    /* Channel, if bound exclusive           */
+  int  dialmax;      /* Dial Retry-Counter                    */
+  int  slavedelay;   /* Delay until slave starts up           */
+  int  cbdelay;      /* Delay before Callback                 */
+  int  chargehup;    /* Flag: Charge-Hangup                   */
+  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
+  int  secure;       /* Flag: Secure                          */
+  int  callback;     /* Flag: Callback                        */
+  int  cbhup;        /* Flag: Reject Call before Callback     */
+  int  pppbind;      /* ippp device for bindings              */
+  int  chargeint;    /* Use fixed charge interval length      */
+  int  triggercps;   /* BogoCPS needed for triggering slave   */
+  int  dialtimeout;  /* Dial-Timeout                          */
+  int  dialwait;     /* Time to wait after failed dial        */
+  int  dialmode;     /* Flag: off / on / auto                 */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
+#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
+#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
+#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/fcntl.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+
+#define ISDN_TTY_MAJOR    43
+#define ISDN_TTYAUX_MAJOR 44
+#define ISDN_MAJOR        45
+
+/* The minor-devicenumbers for Channel 0 and 1 are used as arguments for
+ * physical Channel-Mapping, so they MUST NOT be changed without changing
+ * the correspondent code in isdn.c
+ */
+
+#define ISDN_MINOR_B        0
+#define ISDN_MINOR_BMAX     (ISDN_MAX_CHANNELS-1)
+#define ISDN_MINOR_CTRL     64
+#define ISDN_MINOR_CTRLMAX  (64 + (ISDN_MAX_CHANNELS-1))
+#define ISDN_MINOR_PPP      128
+#define ISDN_MINOR_PPPMAX   (128 + (ISDN_MAX_CHANNELS-1))
+#define ISDN_MINOR_STATUS   255
+
+#ifdef CONFIG_ISDN_PPP
+
+#ifdef CONFIG_ISDN_PPP_VJ
+#  include <net/slhc_vj.h>
+#endif
+
+#include <linux/ppp_defs.h>
+#include <linux/if_ppp.h>
+
+#include <linux/isdn_ppp.h>
+#endif
+
+#ifdef CONFIG_ISDN_X25
+#  include <linux/concap.h>
+#endif
+
+#include <linux/isdnif.h>
+
+#define ISDN_DRVIOCTL_MASK       0x7f  /* Mask for Device-ioctl */
+
+/* Until now unused */
+#define ISDN_SERVICE_VOICE 1
+#define ISDN_SERVICE_AB    1<<1 
+#define ISDN_SERVICE_X21   1<<2
+#define ISDN_SERVICE_G4    1<<3
+#define ISDN_SERVICE_BTX   1<<4
+#define ISDN_SERVICE_DFUE  1<<5
+#define ISDN_SERVICE_X25   1<<6
+#define ISDN_SERVICE_TTX   1<<7
+#define ISDN_SERVICE_MIXED 1<<8
+#define ISDN_SERVICE_FW    1<<9
+#define ISDN_SERVICE_GTEL  1<<10
+#define ISDN_SERVICE_BTXN  1<<11
+#define ISDN_SERVICE_BTEL  1<<12
+
+/* Macros checking plain usage */
+#define USG_NONE(x)         ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NONE)
+#define USG_RAW(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_RAW)
+#define USG_MODEM(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM)
+#define USG_VOICE(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)
+#define USG_NET(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NET)
+#define USG_FAX(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_FAX)
+#define USG_OUTGOING(x)     ((x & ISDN_USAGE_OUTGOING)==ISDN_USAGE_OUTGOING)
+#define USG_MODEMORVOICE(x) (((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM) || \
+                             ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)     )
+
+/* Timer-delays and scheduling-flags */
+#define ISDN_TIMER_RES         4                         /* Main Timer-Resolution   */
+#define ISDN_TIMER_02SEC       (HZ/ISDN_TIMER_RES/5)     /* Slow-Timer1 .2 sec      */
+#define ISDN_TIMER_1SEC        (HZ/ISDN_TIMER_RES)       /* Slow-Timer2 1 sec       */
+#define ISDN_TIMER_RINGING     5 /* tty RINGs = ISDN_TIMER_1SEC * this factor       */
+#define ISDN_TIMER_KEEPINT    10 /* Cisco-Keepalive = ISDN_TIMER_1SEC * this factor */
+#define ISDN_TIMER_MODEMREAD   1
+#define ISDN_TIMER_MODEMPLUS   2
+#define ISDN_TIMER_MODEMRING   4
+#define ISDN_TIMER_MODEMXMIT   8
+#define ISDN_TIMER_NETDIAL    16 
+#define ISDN_TIMER_NETHANGUP  32
+#define ISDN_TIMER_CARRIER   256 /* Wait for Carrier */
+#define ISDN_TIMER_FAST      (ISDN_TIMER_MODEMREAD | ISDN_TIMER_MODEMPLUS | \
+                              ISDN_TIMER_MODEMXMIT)
+#define ISDN_TIMER_SLOW      (ISDN_TIMER_MODEMRING | ISDN_TIMER_NETHANGUP | \
+                              ISDN_TIMER_NETDIAL | ISDN_TIMER_CARRIER)
+
+/* Timeout-Values for isdn_net_dial() */
+#define ISDN_TIMER_DTIMEOUT10 (10*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+#define ISDN_TIMER_DTIMEOUT15 (15*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+#define ISDN_TIMER_DTIMEOUT60 (60*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+
+/* GLOBAL_FLAGS */
+#define ISDN_GLOBAL_STOPPED 1
+
+/*=================== Start of ip-over-ISDN stuff =========================*/
+
+/* Feature- and status-flags for a net-interface */
+#define ISDN_NET_CONNECTED  0x01       /* Bound to ISDN-Channel             */
+#define ISDN_NET_SECURE     0x02       /* Accept calls from phonelist only  */
+#define ISDN_NET_CALLBACK   0x04       /* activate callback                 */
+#define ISDN_NET_CBHUP      0x08       /* hangup before callback            */
+#define ISDN_NET_CBOUT      0x10       /* remote machine does callback      */
+
+#define ISDN_NET_MAGIC      0x49344C02 /* for paranoia-checking             */
+
+/* Phone-list-element */
+typedef struct {
+  void *next;
+  char num[ISDN_MSNLEN];
+} isdn_net_phone;
+
+/*
+   Principles when extending structures for generic encapsulation protocol
+   ("concap") support:
+   - Stuff which is hardware specific (here i4l-specific) goes in 
+     the netdev -> local structure (here: isdn_net_local)
+   - Stuff which is encapsulation protocol specific goes in the structure
+     which holds the linux device structure (here: isdn_net_device)
+*/
+
+/* Local interface-data */
+typedef struct isdn_net_local_s {
+  ulong                  magic;
+  char                   name[10];     /* Name of device                   */
+  struct net_device_stats stats;       /* Ethernet Statistics              */
+  int                    isdn_device;  /* Index to isdn-device             */
+  int                    isdn_channel; /* Index to isdn-channel            */
+  int			 ppp_slot;     /* PPPD device slot number          */
+  int                    pre_device;   /* Preselected isdn-device          */
+  int                    pre_channel;  /* Preselected isdn-channel         */
+  int                    exclusive;    /* If non-zero idx to reserved chan.*/
+  int                    flags;        /* Connection-flags                 */
+  int                    dialretry;    /* Counter for Dialout-retries      */
+  int                    dialmax;      /* Max. Number of Dial-retries      */
+  int                    cbdelay;      /* Delay before Callback starts     */
+  int                    dtimer;       /* Timeout-counter for dialing      */
+  char                   msn[ISDN_MSNLEN]; /* MSNs/EAZs for this interface */
+  u_char                 cbhup;        /* Flag: Reject Call before Callback*/
+  u_char                 dialstate;    /* State for dialing                */
+  u_char                 p_encap;      /* Packet encapsulation             */
+                                       /*   0 = Ethernet over ISDN         */
+				       /*   1 = RAW-IP                     */
+                                       /*   2 = IP with type field         */
+  u_char                 l2_proto;     /* Layer-2-protocol                 */
+				       /* See ISDN_PROTO_L2..-constants in */
+                                       /* isdnif.h                         */
+                                       /*   0 = X75/LAPB with I-Frames     */
+				       /*   1 = X75/LAPB with UI-Frames    */
+				       /*   2 = X75/LAPB with BUI-Frames   */
+				       /*   3 = HDLC                       */
+  u_char                 l3_proto;     /* Layer-3-protocol                 */
+				       /* See ISDN_PROTO_L3..-constants in */
+                                       /* isdnif.h                         */
+                                       /*   0 = Transparent                */
+  int                    huptimer;     /* Timeout-counter for auto-hangup  */
+  int                    charge;       /* Counter for charging units       */
+  ulong                  chargetime;   /* Timer for Charging info          */
+  int                    hupflags;     /* Flags for charge-unit-hangup:    */
+				       /* bit0: chargeint is invalid       */
+				       /* bit1: Getting charge-interval    */
+                                       /* bit2: Do charge-unit-hangup      */
+                                       /* bit3: Do hangup even on incoming */
+  int                    outgoing;     /* Flag: outgoing call              */
+  int                    onhtime;      /* Time to keep link up             */
+  int                    chargeint;    /* Interval between charge-infos    */
+  int                    onum;         /* Flag: at least 1 outgoing number */
+  int                    cps;          /* current speed of this interface  */
+  int                    transcount;   /* byte-counter for cps-calculation */
+  int                    sqfull;       /* Flag: netdev-queue overloaded    */
+  ulong                  sqfull_stamp; /* Start-Time of overload           */
+  ulong                  slavedelay;   /* Dynamic bundling delaytime       */
+  int                    triggercps;   /* BogoCPS needed for trigger slave */
+  isdn_net_phone         *phone[2];    /* List of remote-phonenumbers      */
+				       /* phone[0] = Incoming Numbers      */
+				       /* phone[1] = Outgoing Numbers      */
+  isdn_net_phone         *dial;        /* Pointer to dialed number         */
+  struct net_device      *master;      /* Ptr to Master device for slaves  */
+  struct net_device      *slave;       /* Ptr to Slave device for masters  */
+  struct isdn_net_local_s *next;       /* Ptr to next link in bundle       */
+  struct isdn_net_local_s *last;       /* Ptr to last link in bundle       */
+  struct isdn_net_dev_s  *netdev;      /* Ptr to netdev                    */
+  struct sk_buff_head    super_tx_queue; /* List of supervisory frames to  */
+	                               /* be transmitted asap              */
+  atomic_t frame_cnt;                  /* number of frames currently       */
+                        	       /* queued in HL driver              */    
+                                       /* Ptr to orig. hard_header_cache   */
+  spinlock_t             xmit_lock;    /* used to protect the xmit path of */
+                                       /* a particular channel (including  */
+                                       /* the frame_cnt                    */
+
+  int                    (*org_hhc)(
+				    struct neighbour *neigh,
+				    struct hh_cache *hh);
+                                       /* Ptr to orig. header_cache_update */
+  void                   (*org_hcu)(struct hh_cache *,
+				    struct net_device *,
+                                    unsigned char *);
+  int  pppbind;                        /* ippp device for bindings         */
+  int					dialtimeout;	/* How long shall we try on dialing? (jiffies) */
+  int					dialwait;		/* How long shall we wait after failed attempt? (jiffies) */
+  ulong					dialstarted;	/* jiffies of first dialing-attempt */
+  ulong					dialwait_timer;	/* jiffies of earliest next dialing-attempt */
+  int					huptimeout;		/* How long will the connection be up? (seconds) */
+#ifdef CONFIG_ISDN_X25
+  struct concap_device_ops *dops;      /* callbacks used by encapsulator   */
+#endif
+  /* use an own struct for that in later versions */
+  ulong cisco_myseq;                   /* Local keepalive seq. for Cisco   */
+  ulong cisco_mineseen;                /* returned keepalive seq. from remote */
+  ulong cisco_yourseq;                 /* Remote keepalive seq. for Cisco  */
+  int cisco_keepalive_period;		/* keepalive period */
+  ulong cisco_last_slarp_in;		/* jiffie of last keepalive packet we received */
+  char cisco_line_state;		/* state of line according to keepalive packets */
+  char cisco_debserint;			/* debugging flag of cisco hdlc with slarp */
+  struct timer_list cisco_timer;
+  struct work_struct tqueue;
+} isdn_net_local;
+
+/* the interface itself */
+typedef struct isdn_net_dev_s {
+  isdn_net_local *local;
+  isdn_net_local *queue;               /* circular list of all bundled
+					  channels, which are currently
+					  online                           */
+  spinlock_t queue_lock;               /* lock to protect queue            */
+  void *next;                          /* Pointer to next isdn-interface   */
+  struct net_device dev;               /* interface to upper levels        */
+#ifdef CONFIG_ISDN_PPP
+  ippp_bundle * pb;		/* pointer to the common bundle structure
+   			         * with the per-bundle data */
+#endif
+#ifdef CONFIG_ISDN_X25
+  struct concap_proto  *cprot; /* connection oriented encapsulation protocol */
+#endif
+
+} isdn_net_dev;
+
+/*===================== End of ip-over-ISDN stuff ===========================*/
+
+/*======================= Start of ISDN-tty stuff ===========================*/
+
+#define ISDN_ASYNC_MAGIC          0x49344C01 /* for paranoia-checking        */
+#define ISDN_ASYNC_INITIALIZED	  0x80000000 /* port was initialized         */
+#define ISDN_ASYNC_CALLOUT_ACTIVE 0x40000000 /* Call out device active       */
+#define ISDN_ASYNC_NORMAL_ACTIVE  0x20000000 /* Normal device active         */
+#define ISDN_ASYNC_CLOSING	  0x08000000 /* Serial port is closing       */
+#define ISDN_ASYNC_CTS_FLOW	  0x04000000 /* Do CTS flow control          */
+#define ISDN_ASYNC_CHECK_CD	  0x02000000 /* i.e., CLOCAL                 */
+#define ISDN_ASYNC_HUP_NOTIFY         0x0001 /* Notify tty on hangups/closes */
+#define ISDN_ASYNC_SESSION_LOCKOUT    0x0100 /* Lock cua opens on session    */
+#define ISDN_ASYNC_PGRP_LOCKOUT       0x0200 /* Lock cua opens on pgrp       */
+#define ISDN_ASYNC_CALLOUT_NOHUP      0x0400 /* No hangup for cui            */
+#define ISDN_ASYNC_SPLIT_TERMIOS      0x0008 /* Sep. termios for dialin/out  */
+#define ISDN_SERIAL_XMIT_SIZE           1024 /* Default bufsize for write    */
+#define ISDN_SERIAL_XMIT_MAX            4000 /* Maximum bufsize for write    */
+#define ISDN_SERIAL_TYPE_NORMAL            1
+#define ISDN_SERIAL_TYPE_CALLOUT           2
+
+#ifdef CONFIG_ISDN_AUDIO
+/* For using sk_buffs with audio we need some private variables
+ * within each sk_buff. For this purpose, we declare a struct here,
+ * and put it always at the private skb->cb data array. A few macros help
+ * accessing the variables.
+ */
+typedef struct _isdn_audio_data {
+  unsigned short dle_count;
+  unsigned char  lock;
+} isdn_audio_data_t;
+
+#define ISDN_AUDIO_SKB_DLECOUNT(skb)	(((isdn_audio_data_t *)&skb->cb[0])->dle_count)
+#define ISDN_AUDIO_SKB_LOCK(skb)	(((isdn_audio_data_t *)&skb->cb[0])->lock)
+#endif
+
+/* Private data of AT-command-interpreter */
+typedef struct atemu {
+	u_char       profile[ISDN_MODEM_NUMREG]; /* Modem-Regs. Profile 0              */
+	u_char       mdmreg[ISDN_MODEM_NUMREG];  /* Modem-Registers                    */
+	char         pmsn[ISDN_MSNLEN];          /* EAZ/MSNs Profile 0                 */
+	char         msn[ISDN_MSNLEN];           /* EAZ/MSN                            */
+	char         plmsn[ISDN_LMSNLEN];        /* Listening MSNs Profile 0           */
+	char         lmsn[ISDN_LMSNLEN];         /* Listening MSNs                     */
+	char         cpn[ISDN_MSNLEN];           /* CalledPartyNumber on incoming call */
+	char         connmsg[ISDN_CMSGLEN];	 /* CONNECT-Msg from HL-Driver	       */
+#ifdef CONFIG_ISDN_AUDIO
+	u_char       vpar[10];                   /* Voice-parameters                   */
+	int          lastDLE;                    /* Flag for voice-coding: DLE seen    */
+#endif
+	int          mdmcmdl;                    /* Length of Modem-Commandbuffer      */
+	int          pluscount;                  /* Counter for +++ sequence           */
+	u_long       lastplus;                   /* Timestamp of last +                */
+	int	     carrierwait;                /* Seconds of carrier waiting         */
+	char         mdmcmd[255];                /* Modem-Commandbuffer                */
+	unsigned int charge;                     /* Charge units of current connection */
+} atemu;
+
+/* Private data (similar to async_struct in <linux/serial.h>) */
+typedef struct modem_info {
+  int			magic;
+  struct module		*owner;
+  int			flags;		 /* defined in tty.h               */
+  int			x_char;		 /* xon/xoff character             */
+  int			mcr;		 /* Modem control register         */
+  int                   msr;             /* Modem status register          */
+  int                   lsr;             /* Line status register           */
+  int			line;
+  int			count;		 /* # of fd on device              */
+  int			blocked_open;	 /* # of blocked opens             */
+  long			session;	 /* Session of opening process     */
+  long			pgrp;		 /* pgrp of opening process        */
+  int                   online;          /* 1 = B-Channel is up, drop data */
+					 /* 2 = B-Channel is up, deliver d.*/
+  int                   dialing;         /* Dial in progress or ATA        */
+  int                   rcvsched;        /* Receive needs schedule         */
+  int                   isdn_driver;	 /* Index to isdn-driver           */
+  int                   isdn_channel;    /* Index to isdn-channel          */
+  int                   drv_index;       /* Index to dev->usage            */
+  int                   ncarrier;        /* Flag: schedule NO CARRIER      */
+  unsigned char         last_cause[8];   /* Last cause message             */
+  unsigned char         last_num[ISDN_MSNLEN];
+	                                 /* Last phone-number              */
+  unsigned char         last_l2;         /* Last layer-2 protocol          */
+  unsigned char         last_si;         /* Last service                   */
+  unsigned char         last_lhup;       /* Last hangup local?             */
+  unsigned char         last_dir;        /* Last direction (in or out)     */
+  struct timer_list     nc_timer;        /* Timer for delayed NO CARRIER   */
+  int                   send_outstanding;/* # of outstanding send-requests */
+  int                   xmit_size;       /* max. # of chars in xmit_buf    */
+  int                   xmit_count;      /* # of chars in xmit_buf         */
+  unsigned char         *xmit_buf;       /* transmit buffer                */
+  struct sk_buff_head   xmit_queue;      /* transmit queue                 */
+  atomic_t              xmit_lock;       /* Semaphore for isdn_tty_write   */
+#ifdef CONFIG_ISDN_AUDIO
+  int                   vonline;         /* Voice-channel status           */
+					 /* Bit 0 = recording              */
+					 /* Bit 1 = playback               */
+					 /* Bit 2 = playback, DLE-ETX seen */
+  struct sk_buff_head   dtmf_queue;      /* queue for dtmf results         */
+  void                  *adpcms;         /* state for adpcm decompression  */
+  void                  *adpcmr;         /* state for adpcm compression    */
+  void                  *dtmf_state;     /* state for dtmf decoder         */
+  void                  *silence_state;  /* state for silence detection    */
+#endif
+#ifdef CONFIG_ISDN_TTY_FAX
+  struct T30_s		*fax;		 /* T30 Fax Group 3 data/interface */
+  int			faxonline;	 /* Fax-channel status             */
+#endif
+  struct tty_struct 	*tty;            /* Pointer to corresponding tty   */
+  atemu                 emu;             /* AT-emulator data               */
+  struct termios	normal_termios;  /* For saving termios structs     */
+  struct termios	callout_termios;
+  wait_queue_head_t	open_wait, close_wait;
+  struct semaphore      write_sem;
+  spinlock_t	        readlock;
+} modem_info;
+
+#define ISDN_MODEM_WINSIZE 8
+
+/* Description of one ISDN-tty */
+typedef struct _isdn_modem {
+  int                refcount;				/* Number of opens        */
+  struct tty_driver  *tty_modem;			/* tty-device             */
+  struct tty_struct  *modem_table[ISDN_MAX_CHANNELS];	/* ?? copied from Orig    */
+  struct termios     *modem_termios[ISDN_MAX_CHANNELS];
+  struct termios     *modem_termios_locked[ISDN_MAX_CHANNELS];
+  modem_info         info[ISDN_MAX_CHANNELS];	   /* Private data           */
+} isdn_modem_t;
+
+/*======================= End of ISDN-tty stuff ============================*/
+
+/*======================== Start of V.110 stuff ============================*/
+#define V110_BUFSIZE 1024
+
+typedef struct {
+	int nbytes;                    /* 1 Matrixbyte -> nbytes in stream     */
+	int nbits;                     /* Number of used bits in streambyte    */
+	unsigned char key;             /* Bitmask in stream eg. 11 (nbits=2)   */
+	int decodelen;                 /* Amount of data in decodebuf          */
+	int SyncInit;                  /* Number of sync frames to send        */
+	unsigned char *OnlineFrame;    /* Precalculated V110 idle frame        */
+	unsigned char *OfflineFrame;   /* Precalculated V110 sync Frame        */
+	int framelen;                  /* Length of frames                     */
+	int skbuser;                   /* Number of unacked userdata skbs      */
+	int skbidle;                   /* Number of unacked idle/sync skbs     */
+	int introducer;                /* Local vars for decoder               */
+	int dbit;
+	unsigned char b;
+	int skbres;                    /* space to reserve in outgoing skb     */
+	int maxsize;                   /* maxbufsize of lowlevel driver        */
+	unsigned char *encodebuf;      /* temporary buffer for encoding        */
+	unsigned char decodebuf[V110_BUFSIZE]; /* incomplete V110 matrices     */
+} isdn_v110_stream;
+
+/*========================= End of V.110 stuff =============================*/
+
+/*======================= Start of general stuff ===========================*/
+
+typedef struct {
+	char *next;
+	char *private;
+} infostruct;
+
+#define DRV_FLAG_RUNNING 1
+#define DRV_FLAG_REJBUS  2
+#define DRV_FLAG_LOADED  4
+
+/* Description of hardware-level-driver */
+typedef struct _isdn_driver {
+	ulong               online;           /* Channel-Online flags             */
+	ulong               flags;            /* Misc driver Flags                */
+	int                 locks;            /* Number of locks for this driver  */
+	int                 channels;         /* Number of channels               */
+	wait_queue_head_t   st_waitq;         /* Wait-Queue for status-read's     */
+	int                 maxbufsize;       /* Maximum Buffersize supported     */
+	unsigned long       pktcount;         /* Until now: unused                */
+	int                 stavail;          /* Chars avail on Status-device     */
+	isdn_if            *interface;        /* Interface to driver              */
+	int                *rcverr;           /* Error-counters for B-Ch.-receive */
+	int                *rcvcount;         /* Byte-counters for B-Ch.-receive  */
+#ifdef CONFIG_ISDN_AUDIO
+	unsigned long      DLEflag;           /* Flags: Insert DLE at next read   */
+#endif
+	struct sk_buff_head *rpqueue;         /* Pointers to start of Rcv-Queue   */
+	wait_queue_head_t  *rcv_waitq;       /* Wait-Queues for B-Channel-Reads  */
+	wait_queue_head_t  *snd_waitq;       /* Wait-Queue for B-Channel-Send's  */
+	char               msn2eaz[10][ISDN_MSNLEN];  /* Mapping-Table MSN->EAZ   */
+} isdn_driver_t;
+
+/* Main driver-data */
+typedef struct isdn_devt {
+	struct module     *owner;
+	spinlock_t	  lock;
+	unsigned short    flags;		      /* Bitmapped Flags:           */
+	int               drivers;		      /* Current number of drivers  */
+	int               channels;		      /* Current number of channels */
+	int               net_verbose;                /* Verbose-Flag               */
+	int               modempoll;		      /* Flag: tty-read active      */
+	spinlock_t	  timerlock;
+	int               tflags;                     /* Timer-Flags:               */
+	/*  see ISDN_TIMER_..defines  */
+	int               global_flags;
+	infostruct        *infochain;                 /* List of open info-devs.    */
+	wait_queue_head_t info_waitq;                 /* Wait-Queue for isdninfo    */
+	struct timer_list timer;		      /* Misc.-function Timer       */
+	int               chanmap[ISDN_MAX_CHANNELS]; /* Map minor->device-channel  */
+	int               drvmap[ISDN_MAX_CHANNELS];  /* Map minor->driver-index    */
+	int               usage[ISDN_MAX_CHANNELS];   /* Used by tty/ip/voice       */
+	char              num[ISDN_MAX_CHANNELS][ISDN_MSNLEN];
+	/* Remote number of active ch.*/
+	int               m_idx[ISDN_MAX_CHANNELS];   /* Index for mdm....          */
+	isdn_driver_t     *drv[ISDN_MAX_DRIVERS];     /* Array of drivers           */
+	isdn_net_dev      *netdev;		      /* Linked list of net-if's    */
+	char              drvid[ISDN_MAX_DRIVERS][20];/* Driver-ID                 */
+	struct task_struct *profd;                    /* For iprofd                 */
+	isdn_modem_t      mdm;			      /* tty-driver-data            */
+	isdn_net_dev      *rx_netdev[ISDN_MAX_CHANNELS]; /* rx netdev-pointers     */
+	isdn_net_dev      *st_netdev[ISDN_MAX_CHANNELS]; /* stat netdev-pointers   */
+	ulong             ibytes[ISDN_MAX_CHANNELS];  /* Statistics incoming bytes  */
+	ulong             obytes[ISDN_MAX_CHANNELS];  /* Statistics outgoing bytes  */
+	int               v110emu[ISDN_MAX_CHANNELS]; /* V.110 emulator-mode 0=none */
+	atomic_t          v110use[ISDN_MAX_CHANNELS]; /* Usage-Semaphore for stream */
+	isdn_v110_stream  *v110[ISDN_MAX_CHANNELS];   /* V.110 private data         */
+	struct semaphore  sem;                        /* serialize list access*/
+	unsigned long     global_features;
+} isdn_dev;
+
+extern isdn_dev *dev;
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __ISDN_H__ */
diff --git a/include/linux/isdn/capicmd.h b/include/linux/isdn/capicmd.h
new file mode 100644
index 000000000000..b58635f722da
--- /dev/null
+++ b/include/linux/isdn/capicmd.h
@@ -0,0 +1,115 @@
+/* $Id: capicmd.h,v 1.2.6.2 2001/09/23 22:24:33 kai Exp $
+ * 
+ * CAPI 2.0 Interface for Linux
+ * 
+ * Copyright 1997 by Carsten Paeth <calle@calle.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPICMD_H__
+#define __CAPICMD_H__
+
+#define CAPI_MSG_BASELEN		8
+#define CAPI_DATA_B3_REQ_LEN		(CAPI_MSG_BASELEN+4+4+2+2+2)
+#define CAPI_DATA_B3_RESP_LEN		(CAPI_MSG_BASELEN+4+2)
+
+/*----- CAPI commands -----*/
+#define CAPI_ALERT		    0x01
+#define CAPI_CONNECT		    0x02
+#define CAPI_CONNECT_ACTIVE	    0x03
+#define CAPI_CONNECT_B3_ACTIVE	    0x83
+#define CAPI_CONNECT_B3 	    0x82
+#define CAPI_CONNECT_B3_T90_ACTIVE  0x88
+#define CAPI_DATA_B3		    0x86
+#define CAPI_DISCONNECT_B3	    0x84
+#define CAPI_DISCONNECT 	    0x04
+#define CAPI_FACILITY		    0x80
+#define CAPI_INFO		    0x08
+#define CAPI_LISTEN		    0x05
+#define CAPI_MANUFACTURER	    0xff
+#define CAPI_RESET_B3		    0x87
+#define CAPI_SELECT_B_PROTOCOL	    0x41
+
+/*----- CAPI subcommands -----*/
+
+#define CAPI_REQ    0x80
+#define CAPI_CONF   0x81
+#define CAPI_IND    0x82
+#define CAPI_RESP   0x83
+
+/*----- CAPI combined commands -----*/
+
+#define CAPICMD(cmd,subcmd)	(((cmd)<<8)|(subcmd))
+
+#define CAPI_DISCONNECT_REQ		CAPICMD(CAPI_DISCONNECT,CAPI_REQ)
+#define CAPI_DISCONNECT_CONF		CAPICMD(CAPI_DISCONNECT,CAPI_CONF)
+#define CAPI_DISCONNECT_IND		CAPICMD(CAPI_DISCONNECT,CAPI_IND)
+#define CAPI_DISCONNECT_RESP		CAPICMD(CAPI_DISCONNECT,CAPI_RESP)
+
+#define CAPI_ALERT_REQ			CAPICMD(CAPI_ALERT,CAPI_REQ)
+#define CAPI_ALERT_CONF			CAPICMD(CAPI_ALERT,CAPI_CONF)
+
+#define CAPI_CONNECT_REQ		CAPICMD(CAPI_CONNECT,CAPI_REQ)
+#define CAPI_CONNECT_CONF		CAPICMD(CAPI_CONNECT,CAPI_CONF)
+#define CAPI_CONNECT_IND		CAPICMD(CAPI_CONNECT,CAPI_IND)
+#define CAPI_CONNECT_RESP		CAPICMD(CAPI_CONNECT,CAPI_RESP)
+
+#define CAPI_CONNECT_ACTIVE_REQ		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_REQ)
+#define CAPI_CONNECT_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_CONF)
+#define CAPI_CONNECT_ACTIVE_IND		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_RESP)
+
+#define CAPI_SELECT_B_PROTOCOL_REQ	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_REQ)
+#define CAPI_SELECT_B_PROTOCOL_CONF	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_CONF)
+
+#define CAPI_CONNECT_B3_ACTIVE_REQ	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_REQ)
+#define CAPI_CONNECT_B3_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_CONF)
+#define CAPI_CONNECT_B3_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_B3_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_RESP)
+
+#define CAPI_CONNECT_B3_REQ		CAPICMD(CAPI_CONNECT_B3,CAPI_REQ)
+#define CAPI_CONNECT_B3_CONF		CAPICMD(CAPI_CONNECT_B3,CAPI_CONF)
+#define CAPI_CONNECT_B3_IND		CAPICMD(CAPI_CONNECT_B3,CAPI_IND)
+#define CAPI_CONNECT_B3_RESP		CAPICMD(CAPI_CONNECT_B3,CAPI_RESP)
+
+
+#define CAPI_CONNECT_B3_T90_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_B3_T90_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_RESP)
+
+#define CAPI_DATA_B3_REQ		CAPICMD(CAPI_DATA_B3,CAPI_REQ)
+#define CAPI_DATA_B3_CONF		CAPICMD(CAPI_DATA_B3,CAPI_CONF)
+#define CAPI_DATA_B3_IND		CAPICMD(CAPI_DATA_B3,CAPI_IND)
+#define CAPI_DATA_B3_RESP		CAPICMD(CAPI_DATA_B3,CAPI_RESP)
+
+#define CAPI_DISCONNECT_B3_REQ		CAPICMD(CAPI_DISCONNECT_B3,CAPI_REQ)
+#define CAPI_DISCONNECT_B3_CONF		CAPICMD(CAPI_DISCONNECT_B3,CAPI_CONF)
+#define CAPI_DISCONNECT_B3_IND		CAPICMD(CAPI_DISCONNECT_B3,CAPI_IND)
+#define CAPI_DISCONNECT_B3_RESP		CAPICMD(CAPI_DISCONNECT_B3,CAPI_RESP)
+
+#define CAPI_RESET_B3_REQ		CAPICMD(CAPI_RESET_B3,CAPI_REQ)
+#define CAPI_RESET_B3_CONF		CAPICMD(CAPI_RESET_B3,CAPI_CONF)
+#define CAPI_RESET_B3_IND		CAPICMD(CAPI_RESET_B3,CAPI_IND)
+#define CAPI_RESET_B3_RESP		CAPICMD(CAPI_RESET_B3,CAPI_RESP)
+
+#define CAPI_LISTEN_REQ			CAPICMD(CAPI_LISTEN,CAPI_REQ)
+#define CAPI_LISTEN_CONF		CAPICMD(CAPI_LISTEN,CAPI_CONF)
+
+#define CAPI_MANUFACTURER_REQ		CAPICMD(CAPI_MANUFACTURER,CAPI_REQ)
+#define CAPI_MANUFACTURER_CONF		CAPICMD(CAPI_MANUFACTURER,CAPI_CONF)
+#define CAPI_MANUFACTURER_IND		CAPICMD(CAPI_MANUFACTURER,CAPI_IND)
+#define CAPI_MANUFACTURER_RESP		CAPICMD(CAPI_MANUFACTURER,CAPI_RESP)
+
+#define CAPI_FACILITY_REQ		CAPICMD(CAPI_FACILITY,CAPI_REQ)
+#define CAPI_FACILITY_CONF		CAPICMD(CAPI_FACILITY,CAPI_CONF)
+#define CAPI_FACILITY_IND		CAPICMD(CAPI_FACILITY,CAPI_IND)
+#define CAPI_FACILITY_RESP		CAPICMD(CAPI_FACILITY,CAPI_RESP)
+
+#define CAPI_INFO_REQ			CAPICMD(CAPI_INFO,CAPI_REQ)
+#define CAPI_INFO_CONF			CAPICMD(CAPI_INFO,CAPI_CONF)
+#define CAPI_INFO_IND			CAPICMD(CAPI_INFO,CAPI_IND)
+#define CAPI_INFO_RESP			CAPICMD(CAPI_INFO,CAPI_RESP)
+
+#endif				/* __CAPICMD_H__ */
diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h
new file mode 100644
index 000000000000..35e9b0fd014b
--- /dev/null
+++ b/include/linux/isdn/capilli.h
@@ -0,0 +1,113 @@
+/* $Id: capilli.h,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
+ * 
+ * Kernel CAPI 2.0 Driver Interface for Linux
+ * 
+ * Copyright 1999 by Carsten Paeth <calle@calle.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPILLI_H__
+#define __CAPILLI_H__
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/capi.h>
+#include <linux/kernelcapi.h>
+
+typedef struct capiloaddatapart {
+	int user;		/* data in userspace ? */
+	int len;
+	unsigned char *data;
+} capiloaddatapart;
+
+typedef struct capiloaddata {
+	capiloaddatapart firmware;
+	capiloaddatapart configuration;
+} capiloaddata;
+
+typedef struct capicardparams {
+	unsigned int port;
+	unsigned irq;
+	int cardtype;
+	int cardnr;
+	unsigned int membase;
+} capicardparams;
+
+struct capi_ctr {
+	/* filled in before calling attach_capi_ctr */
+	struct module *owner;
+	void *driverdata;			/* driver specific */
+	char name[32];				/* name of controller */
+	char *driver_name;			/* name of driver */
+	int (*load_firmware)(struct capi_ctr *, capiloaddata *);
+	void (*reset_ctr)(struct capi_ctr *);
+	void (*register_appl)(struct capi_ctr *, u16 appl,
+			      capi_register_params *);
+	void (*release_appl)(struct capi_ctr *, u16 appl);
+	u16  (*send_message)(struct capi_ctr *, struct sk_buff *skb);
+	
+	char *(*procinfo)(struct capi_ctr *);
+	int (*ctr_read_proc)(char *page, char **start, off_t off,
+			     int count, int *eof, struct capi_ctr *card);
+
+	/* filled in before calling ready callback */
+	u8 manu[CAPI_MANUFACTURER_LEN];		/* CAPI_GET_MANUFACTURER */
+	capi_version version;			/* CAPI_GET_VERSION */
+	capi_profile profile;			/* CAPI_GET_PROFILE */
+	u8 serial[CAPI_SERIAL_LEN];		/* CAPI_GET_SERIAL */
+
+	/* management information for kcapi */
+
+	unsigned long nrecvctlpkt;
+	unsigned long nrecvdatapkt;
+	unsigned long nsentctlpkt;
+	unsigned long nsentdatapkt;
+
+	int cnr;				/* controller number */
+	volatile unsigned short cardstate;	/* controller state */
+	volatile int blocked;			/* output blocked */
+	int traceflag;				/* capi trace */
+
+	struct proc_dir_entry *procent;
+        char procfn[128];
+};
+
+int attach_capi_ctr(struct capi_ctr *);
+int detach_capi_ctr(struct capi_ctr *);
+
+void capi_ctr_ready(struct capi_ctr * card);
+void capi_ctr_reseted(struct capi_ctr * card);
+void capi_ctr_suspend_output(struct capi_ctr * card);
+void capi_ctr_resume_output(struct capi_ctr * card);
+void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb);
+
+// ---------------------------------------------------------------------------
+// needed for AVM capi drivers
+
+struct capi_driver {
+	char name[32];				/* driver name */
+	char revision[32];
+
+	int (*add_card)(struct capi_driver *driver, capicardparams *data);
+
+	/* management information for kcapi */
+	struct list_head list; 
+};
+
+void register_capi_driver(struct capi_driver *driver);
+void unregister_capi_driver(struct capi_driver *driver);
+
+// ---------------------------------------------------------------------------
+// library functions for use by hardware controller drivers
+
+void capilib_new_ncci(struct list_head *head, u16 applid, u32 ncci, u32 winsize);
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci);
+void capilib_release_appl(struct list_head *head, u16 applid);
+void capilib_release(struct list_head *head);
+void capilib_data_b3_conf(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
+u16  capilib_data_b3_req(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
+
+#endif				/* __CAPILLI_H__ */
diff --git a/include/linux/isdn/capiutil.h b/include/linux/isdn/capiutil.h
new file mode 100644
index 000000000000..2e79f816703b
--- /dev/null
+++ b/include/linux/isdn/capiutil.h
@@ -0,0 +1,505 @@
+/* $Id: capiutil.h,v 1.5.6.2 2001/09/23 22:24:33 kai Exp $
+ *
+ * CAPI 2.0 defines & types
+ *
+ * From CAPI 2.0 Development Kit AVM 1995 (msg.c)
+ * Rewritten for Linux 1996 by Carsten Paeth <calle@calle.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPIUTIL_H__
+#define __CAPIUTIL_H__
+
+#include <asm/types.h>
+
+#define CAPIMSG_BASELEN		8
+#define CAPIMSG_U8(m, off)	(m[off])
+#define CAPIMSG_U16(m, off)	(m[off]|(m[(off)+1]<<8))
+#define CAPIMSG_U32(m, off)	(m[off]|(m[(off)+1]<<8)|(m[(off)+2]<<16)|(m[(off)+3]<<24))
+#define	CAPIMSG_LEN(m)		CAPIMSG_U16(m,0)
+#define	CAPIMSG_APPID(m)	CAPIMSG_U16(m,2)
+#define	CAPIMSG_COMMAND(m)	CAPIMSG_U8(m,4)
+#define	CAPIMSG_SUBCOMMAND(m)	CAPIMSG_U8(m,5)
+#define CAPIMSG_CMD(m)		(((m[4])<<8)|(m[5]))
+#define	CAPIMSG_MSGID(m)	CAPIMSG_U16(m,6)
+#define CAPIMSG_CONTROLLER(m)	(m[8] & 0x7f)
+#define CAPIMSG_CONTROL(m)	CAPIMSG_U32(m, 8)
+#define CAPIMSG_NCCI(m)		CAPIMSG_CONTROL(m)
+#define CAPIMSG_DATALEN(m)	CAPIMSG_U16(m,16) /* DATA_B3_REQ */
+
+static inline void capimsg_setu8(void *m, int off, __u8 val)
+{
+	((__u8 *)m)[off] = val;
+}
+
+static inline void capimsg_setu16(void *m, int off, __u16 val)
+{
+	((__u8 *)m)[off] = val & 0xff;
+	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
+}
+
+static inline void capimsg_setu32(void *m, int off, __u32 val)
+{
+	((__u8 *)m)[off] = val & 0xff;
+	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
+	((__u8 *)m)[off+2] = (val >> 16) & 0xff;
+	((__u8 *)m)[off+3] = (val >> 24) & 0xff;
+}
+
+#define	CAPIMSG_SETLEN(m, len)		capimsg_setu16(m, 0, len)
+#define	CAPIMSG_SETAPPID(m, applid)	capimsg_setu16(m, 2, applid)
+#define	CAPIMSG_SETCOMMAND(m,cmd)	capimsg_setu8(m, 4, cmd)
+#define	CAPIMSG_SETSUBCOMMAND(m, cmd)	capimsg_setu8(m, 5, cmd)
+#define	CAPIMSG_SETMSGID(m, msgid)	capimsg_setu16(m, 6, msgid)
+#define	CAPIMSG_SETCONTROL(m, contr)	capimsg_setu32(m, 8, contr)
+#define	CAPIMSG_SETDATALEN(m, len)	capimsg_setu16(m, 16, len)
+
+/*----- basic-type definitions -----*/
+
+typedef __u8 *_cstruct;
+
+typedef enum {
+	CAPI_COMPOSE,
+	CAPI_DEFAULT
+} _cmstruct;
+
+/*
+   The _cmsg structure contains all possible CAPI 2.0 parameter.
+   All parameters are stored here first. The function CAPI_CMSG_2_MESSAGE
+   assembles the parameter and builds CAPI2.0 conform messages.
+   CAPI_MESSAGE_2_CMSG disassembles CAPI 2.0 messages and stores the
+   parameter in the _cmsg structure
+ */
+
+typedef struct {
+	/* Header */
+	__u16 ApplId;
+	__u8 Command;
+	__u8 Subcommand;
+	__u16 Messagenumber;
+
+	/* Parameter */
+	union {
+		__u32 adrController;
+		__u32 adrPLCI;
+		__u32 adrNCCI;
+	} adr;
+
+	_cmstruct AdditionalInfo;
+	_cstruct B1configuration;
+	__u16 B1protocol;
+	_cstruct B2configuration;
+	__u16 B2protocol;
+	_cstruct B3configuration;
+	__u16 B3protocol;
+	_cstruct BC;
+	_cstruct BChannelinformation;
+	_cmstruct BProtocol;
+	_cstruct CalledPartyNumber;
+	_cstruct CalledPartySubaddress;
+	_cstruct CallingPartyNumber;
+	_cstruct CallingPartySubaddress;
+	__u32 CIPmask;
+	__u32 CIPmask2;
+	__u16 CIPValue;
+	__u32 Class;
+	_cstruct ConnectedNumber;
+	_cstruct ConnectedSubaddress;
+	__u32 Data;
+	__u16 DataHandle;
+	__u16 DataLength;
+	_cstruct FacilityConfirmationParameter;
+	_cstruct Facilitydataarray;
+	_cstruct FacilityIndicationParameter;
+	_cstruct FacilityRequestParameter;
+	__u16 FacilitySelector;
+	__u16 Flags;
+	__u32 Function;
+	_cstruct HLC;
+	__u16 Info;
+	_cstruct InfoElement;
+	__u32 InfoMask;
+	__u16 InfoNumber;
+	_cstruct Keypadfacility;
+	_cstruct LLC;
+	_cstruct ManuData;
+	__u32 ManuID;
+	_cstruct NCPI;
+	__u16 Reason;
+	__u16 Reason_B3;
+	__u16 Reject;
+	_cstruct Useruserdata;
+
+	/* intern */
+	unsigned l, p;
+	unsigned char *par;
+	__u8 *m;
+
+	/* buffer to construct message */
+	__u8 buf[180];
+
+} _cmsg;
+
+/*
+ * capi_cmsg2message() assembles the parameter from _cmsg to a CAPI 2.0
+ * conform message
+ */
+unsigned capi_cmsg2message(_cmsg * cmsg, __u8 * msg);
+
+/*
+ *  capi_message2cmsg disassembles a CAPI message an writes the parameter
+ *  into _cmsg for easy access
+ */
+unsigned capi_message2cmsg(_cmsg * cmsg, __u8 * msg);
+
+/*
+ * capi_cmsg_header() fills the _cmsg structure with default values, so only
+ * parameter with non default values must be changed before sending the
+ * message.
+ */
+unsigned capi_cmsg_header(_cmsg * cmsg, __u16 _ApplId,
+			  __u8 _Command, __u8 _Subcommand,
+			  __u16 _Messagenumber, __u32 _Controller);
+
+/*
+ * capi_info2str generated a readable string for Capi2.0 reasons.
+ */
+char *capi_info2str(__u16 reason);
+
+/*-----------------------------------------------------------------------*/
+
+/*
+ * Debugging / Tracing functions
+ */
+char *capi_cmd2str(__u8 cmd, __u8 subcmd);
+char *capi_cmsg2str(_cmsg * cmsg);
+char *capi_message2str(__u8 * msg);
+
+/*-----------------------------------------------------------------------*/
+
+static inline void capi_cmsg_answer(_cmsg * cmsg)
+{
+	cmsg->Subcommand |= 0x01;
+}
+
+/*-----------------------------------------------------------------------*/
+
+static inline void capi_fill_CONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					    __u32 adr,
+					    _cstruct NCPI)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x82, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_FACILITY_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 FacilitySelector,
+				       _cstruct FacilityRequestParameter)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x80, 0x80, Messagenumber, adr);
+	cmsg->FacilitySelector = FacilitySelector;
+	cmsg->FacilityRequestParameter = FacilityRequestParameter;
+}
+
+static inline void capi_fill_INFO_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				      __u32 adr,
+				      _cstruct CalledPartyNumber,
+				      _cstruct BChannelinformation,
+				      _cstruct Keypadfacility,
+				      _cstruct Useruserdata,
+				      _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x08, 0x80, Messagenumber, adr);
+	cmsg->CalledPartyNumber = CalledPartyNumber;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_LISTEN_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					__u32 adr,
+					__u32 InfoMask,
+					__u32 CIPmask,
+					__u32 CIPmask2,
+					_cstruct CallingPartyNumber,
+					_cstruct CallingPartySubaddress)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x05, 0x80, Messagenumber, adr);
+	cmsg->InfoMask = InfoMask;
+	cmsg->CIPmask = CIPmask;
+	cmsg->CIPmask2 = CIPmask2;
+	cmsg->CallingPartyNumber = CallingPartyNumber;
+	cmsg->CallingPartySubaddress = CallingPartySubaddress;
+}
+
+static inline void capi_fill_ALERT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				       __u32 adr,
+				       _cstruct BChannelinformation,
+				       _cstruct Keypadfacility,
+				       _cstruct Useruserdata,
+				       _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x01, 0x80, Messagenumber, adr);
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_CONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					 __u32 adr,
+					 __u16 CIPValue,
+					 _cstruct CalledPartyNumber,
+					 _cstruct CallingPartyNumber,
+					 _cstruct CalledPartySubaddress,
+					 _cstruct CallingPartySubaddress,
+					 __u16 B1protocol,
+					 __u16 B2protocol,
+					 __u16 B3protocol,
+					 _cstruct B1configuration,
+					 _cstruct B2configuration,
+					 _cstruct B3configuration,
+					 _cstruct BC,
+					 _cstruct LLC,
+					 _cstruct HLC,
+					 _cstruct BChannelinformation,
+					 _cstruct Keypadfacility,
+					 _cstruct Useruserdata,
+					 _cstruct Facilitydataarray)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x02, 0x80, Messagenumber, adr);
+	cmsg->CIPValue = CIPValue;
+	cmsg->CalledPartyNumber = CalledPartyNumber;
+	cmsg->CallingPartyNumber = CallingPartyNumber;
+	cmsg->CalledPartySubaddress = CalledPartySubaddress;
+	cmsg->CallingPartySubaddress = CallingPartySubaddress;
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+	cmsg->BC = BC;
+	cmsg->LLC = LLC;
+	cmsg->HLC = HLC;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_DATA_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					 __u32 adr,
+					 __u32 Data,
+					 __u16 DataLength,
+					 __u16 DataHandle,
+					 __u16 Flags)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x86, 0x80, Messagenumber, adr);
+	cmsg->Data = Data;
+	cmsg->DataLength = DataLength;
+	cmsg->DataHandle = DataHandle;
+	cmsg->Flags = Flags;
+}
+
+static inline void capi_fill_DISCONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					    __u32 adr,
+					    _cstruct BChannelinformation,
+					    _cstruct Keypadfacility,
+					    _cstruct Useruserdata,
+					    _cstruct Facilitydataarray)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x04, 0x80, Messagenumber, adr);
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_DISCONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					       __u32 adr,
+					       _cstruct NCPI)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x84, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_MANUFACTURER_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					      __u32 adr,
+					      __u32 ManuID,
+					      __u32 Class,
+					      __u32 Function,
+					      _cstruct ManuData)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0xff, 0x80, Messagenumber, adr);
+	cmsg->ManuID = ManuID;
+	cmsg->Class = Class;
+	cmsg->Function = Function;
+	cmsg->ManuData = ManuData;
+}
+
+static inline void capi_fill_RESET_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  _cstruct NCPI)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x87, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_SELECT_B_PROTOCOL_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						   __u32 adr,
+						   __u16 B1protocol,
+						   __u16 B2protocol,
+						   __u16 B3protocol,
+						_cstruct B1configuration,
+						_cstruct B2configuration,
+						_cstruct B3configuration)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x41, 0x80, Messagenumber, adr);
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+}
+
+static inline void capi_fill_CONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 Reject,
+					  __u16 B1protocol,
+					  __u16 B2protocol,
+					  __u16 B3protocol,
+					  _cstruct B1configuration,
+					  _cstruct B2configuration,
+					  _cstruct B3configuration,
+					  _cstruct ConnectedNumber,
+					  _cstruct ConnectedSubaddress,
+					  _cstruct LLC,
+					  _cstruct BChannelinformation,
+					  _cstruct Keypadfacility,
+					  _cstruct Useruserdata,
+					  _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x02, 0x83, Messagenumber, adr);
+	cmsg->Reject = Reject;
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+	cmsg->ConnectedNumber = ConnectedNumber;
+	cmsg->ConnectedSubaddress = ConnectedSubaddress;
+	cmsg->LLC = LLC;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_CONNECT_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						 __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x03, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_CONNECT_B3_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						    __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x83, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_CONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					     __u32 adr,
+					     __u16 Reject,
+					     _cstruct NCPI)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x82, 0x83, Messagenumber, adr);
+	cmsg->Reject = Reject;
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_CONNECT_B3_T90_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+							__u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x88, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_DATA_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 DataHandle)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x86, 0x83, Messagenumber, adr);
+	cmsg->DataHandle = DataHandle;
+}
+
+static inline void capi_fill_DISCONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						__u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x84, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_DISCONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					     __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x04, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_FACILITY_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					   __u32 adr,
+					   __u16 FacilitySelector)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x80, 0x83, Messagenumber, adr);
+	cmsg->FacilitySelector = FacilitySelector;
+}
+
+static inline void capi_fill_INFO_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				       __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x08, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_MANUFACTURER_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					       __u32 adr,
+					       __u32 ManuID,
+					       __u32 Class,
+					       __u32 Function,
+					       _cstruct ManuData)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0xff, 0x83, Messagenumber, adr);
+	cmsg->ManuID = ManuID;
+	cmsg->Class = Class;
+	cmsg->Function = Function;
+	cmsg->ManuData = ManuData;
+}
+
+static inline void capi_fill_RESET_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					   __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x87, 0x83, Messagenumber, adr);
+}
+
+#endif				/* __CAPIUTIL_H__ */
diff --git a/include/linux/isdn/tpam.h b/include/linux/isdn/tpam.h
new file mode 100644
index 000000000000..9f65bea49d11
--- /dev/null
+++ b/include/linux/isdn/tpam.h
@@ -0,0 +1,56 @@
+/* $Id: tpam.h,v 1.1.2.1 2001/06/08 08:23:46 kai Exp $
+ *
+ * Turbo PAM ISDN driver for Linux. (Kernel Driver)
+ *
+ * Copyright 2001 Stelian Pop <stelian.pop@fr.alcove.com>, Alcôve
+ *
+ * For all support questions please contact: <support@auvertech.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _TPAM_H_
+#define _TPAM_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/* IOCTL commands */
+#define TPAM_CMD_DSPLOAD	0x0001
+#define TPAM_CMD_DSPSAVE	0x0002
+#define TPAM_CMD_DSPRUN		0x0003
+#define TPAM_CMD_LOOPMODEON	0x0004
+#define TPAM_CMD_LOOPMODEOFF	0x0005
+
+/* addresses of debug information zones on board */
+#define TPAM_TRAPAUDIT_REGISTER		0x005493e4
+#define TPAM_NCOAUDIT_REGISTER		0x00500000
+#define TPAM_MSGAUDIT_REGISTER		0x008E30F0
+
+/* length of debug information zones on board */
+#define TPAM_TRAPAUDIT_LENGTH		10000
+#define TPAM_NCOAUDIT_LENGTH		300000
+#define TPAM_NCOAUDIT_COUNT		30
+#define TPAM_MSGAUDIT_LENGTH		60000
+
+/* IOCTL load/save parameter */
+typedef struct tpam_dsp_ioctl {
+	__u32 address;	/* address to load/save data */
+	__u32 data_len;	/* size of data to be loaded/saved */
+	__u8 data[0];	/* data */
+} tpam_dsp_ioctl;
+
+#endif /* _TPAM_H_ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
new file mode 100644
index 000000000000..0e7e44ce8301
--- /dev/null
+++ b/include/linux/isdn_divertif.h
@@ -0,0 +1,42 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author    Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG  0x00  /* register command */
+#define DIVERT_CMD_REL  0x01  /* release command */
+#define DIVERT_NO_ERR   0x00  /* return value no error */
+#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
+#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
+#define DIVERT_REG_ERR  0x03  /* module already registered */
+#define DIVERT_REL_ERR  0x04  /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+/***************************************************************/
+/* structure exchanging data between isdn hl and divert module */
+/***************************************************************/ 
+typedef struct
+  { ulong if_magic; /* magic info and version */
+    int cmd; /* command */
+    int (*stat_callback)(isdn_ctrl *); /* supplied by divert module when calling */
+    int (*ll_cmd)(isdn_ctrl *); /* supplied by hl on return */
+    char * (*drv_to_name)(int); /* map a driver id to name, supplied by hl */
+    int (*name_to_drv)(char *); /* map a driver id to name, supplied by hl */
+  } isdn_divert_if;
+
+/*********************/
+/* function register */
+/*********************/
+extern int DIVERT_REG_NAME(isdn_divert_if *);
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
new file mode 100644
index 000000000000..26b00a76e135
--- /dev/null
+++ b/include/linux/isdn_ppp.h
@@ -0,0 +1,249 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _LINUX_ISDN_PPP_H
+#define _LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION    "2.2.0"
+
+struct pppcallinfo
+{
+  int calltype;
+  unsigned char local_num[64];
+  unsigned char remote_num[64];
+  int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE   _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU   _IOW('t',132,int)
+#define PPPIOCSMPMRU   _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT       0x00000200
+#define SC_REJ_MP_PROT   0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ  0x00004000
+
+#define SC_DECOMP_ON		0x01
+#define SC_COMP_ON		0x02
+#define SC_DECOMP_DISCARD	0x04
+#define SC_COMP_DISCARD		0x08
+#define SC_LINK_DECOMP_ON	0x10
+#define SC_LINK_COMP_ON		0x20
+#define SC_LINK_DECOMP_DISCARD	0x40
+#define SC_LINK_COMP_DISCARD	0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+  int num;
+  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+  int optlen;
+  int flags;
+};
+
+#ifdef __KERNEL__
+
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IPPP_FILTER
+#include <linux/filter.h>
+#endif
+
+#define DECOMP_ERR_NOMEM	(-10)
+
+#define MP_END_FRAG    0x40
+#define MP_BEGIN_FRAG  0x80
+
+#define MP_MAX_QUEUE_LEN	16
+
+/*
+ * We need a way for the decompressor to influence the generation of CCP
+ * Reset-Requests in a variety of ways. The decompressor is already returning
+ * a lot of information (generated skb length, error conditions) so we use
+ * another parameter. This parameter is a pointer to a structure which is
+ * to be marked valid by the decompressor and only in this case is ever used.
+ * Furthermore, the only case where this data is used is when the decom-
+ * pressor returns DECOMP_ERROR.
+ *
+ * We use this same struct for the reset entry of the compressor to commu-
+ * nicate to its caller how to deal with sending of a Reset Ack. In this
+ * case, expra is not used, but other options still apply (suppressing
+ * sending with rsend, appending arbitrary data, etc).
+ */
+
+#define IPPP_RESET_MAXDATABYTES	32
+
+struct isdn_ppp_resetparams {
+  unsigned char valid:1;	/* rw Is this structure filled at all ? */
+  unsigned char rsend:1;	/* rw Should we send one at all ? */
+  unsigned char idval:1;	/* rw Is the id field valid ? */
+  unsigned char dtval:1;	/* rw Is the data field valid ? */
+  unsigned char expra:1;	/* rw Is an Ack expected for this Req ? */
+  unsigned char id;		/* wo Send CCP ResetReq with this id */
+  unsigned short maxdlen;	/* ro Max bytes to be stored in data field */
+  unsigned short dlen;		/* rw Bytes stored in data field */
+  unsigned char *data;		/* wo Data for ResetReq info field */
+};
+
+/*
+ * this is an 'old friend' from ppp-comp.h under a new name 
+ * check the original include for more information
+ */
+struct isdn_ppp_compressor {
+  struct isdn_ppp_compressor *next, *prev;
+  struct module *owner;
+  int num; /* CCP compression protocol number */
+  
+  void *(*alloc) (struct isdn_ppp_comp_data *);
+  void (*free) (void *state);
+  int  (*init) (void *state, struct isdn_ppp_comp_data *,
+		int unit,int debug);
+  
+  /* The reset entry needs to get more exact information about the
+     ResetReq or ResetAck it was called with. The parameters are
+     obvious. If reset is called without a Req or Ack frame which
+     could be handed into it, code MUST be set to 0. Using rsparm,
+     the reset entry can control if and how a ResetAck is returned. */
+  
+  void (*reset) (void *state, unsigned char code, unsigned char id,
+		 unsigned char *data, unsigned len,
+		 struct isdn_ppp_resetparams *rsparm);
+  
+  int  (*compress) (void *state, struct sk_buff *in,
+		    struct sk_buff *skb_out, int proto);
+  
+	int  (*decompress) (void *state,struct sk_buff *in,
+			    struct sk_buff *skb_out,
+			    struct isdn_ppp_resetparams *rsparm);
+  
+  void (*incomp) (void *state, struct sk_buff *in,int proto);
+  void (*stat) (void *state, struct compstat *stats);
+};
+
+extern int isdn_ppp_register_compressor(struct isdn_ppp_compressor *);
+extern int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *);
+extern int isdn_ppp_dial_slave(char *);
+extern int isdn_ppp_hangup_slave(char *);
+
+typedef struct {
+  unsigned long seqerrs;
+  unsigned long frame_drops;
+  unsigned long overflows;
+  unsigned long max_queue_len;
+} isdn_mppp_stats;
+
+typedef struct {
+  int mp_mrru;                        /* unused                             */
+  struct sk_buff * frags;	/* fragments sl list -- use skb->next */
+  long frames;			/* number of frames in the frame list */
+  unsigned int seq;		/* last processed packet seq #: any packets
+  				 * with smaller seq # will be dropped
+				 * unconditionally */
+  spinlock_t lock;
+  int ref_ct;				 
+  /* statistics */
+  isdn_mppp_stats stats;
+} ippp_bundle;
+
+#define NUM_RCV_BUFFS     64
+
+struct ippp_buf_queue {
+  struct ippp_buf_queue *next;
+  struct ippp_buf_queue *last;
+  char *buf;                 /* NULL here indicates end of queue */
+  int len;
+};
+
+/* The data structure for one CCP reset transaction */
+enum ippp_ccp_reset_states {
+  CCPResetIdle,
+  CCPResetSentReq,
+  CCPResetRcvdReq,
+  CCPResetSentAck,
+  CCPResetRcvdAck
+};
+
+struct ippp_ccp_reset_state {
+  enum ippp_ccp_reset_states state;	/* State of this transaction */
+  struct ippp_struct *is;		/* Backlink to device stuff */
+  unsigned char id;			/* Backlink id index */
+  unsigned char ta:1;			/* The timer is active (flag) */
+  unsigned char expra:1;		/* We expect a ResetAck at all */
+  int dlen;				/* Databytes stored in data */
+  struct timer_list timer;		/* For timeouts/retries */
+  /* This is a hack but seems sufficient for the moment. We do not want
+     to have this be yet another allocation for some bytes, it is more
+     memory management overhead than the whole mess is worth. */
+  unsigned char data[IPPP_RESET_MAXDATABYTES];
+};
+
+/* The data structure keeping track of the currently outstanding CCP Reset
+   transactions. */
+struct ippp_ccp_reset {
+  struct ippp_ccp_reset_state *rs[256];	/* One per possible id */
+  unsigned char lastid;			/* Last id allocated by the engine */
+};
+
+struct ippp_struct {
+  struct ippp_struct *next_link;
+  int state;
+  spinlock_t buflock;
+  struct ippp_buf_queue rq[NUM_RCV_BUFFS]; /* packet queue for isdn_ppp_read() */
+  struct ippp_buf_queue *first;  /* pointer to (current) first packet */
+  struct ippp_buf_queue *last;   /* pointer to (current) last used packet in queue */
+  wait_queue_head_t wq;
+  struct task_struct *tk;
+  unsigned int mpppcfg;
+  unsigned int pppcfg;
+  unsigned int mru;
+  unsigned int mpmru;
+  unsigned int mpmtu;
+  unsigned int maxcid;
+  struct isdn_net_local_s *lp;
+  int unit;
+  int minor;
+  unsigned int last_link_seqno;
+  long mp_seqno;
+#ifdef CONFIG_ISDN_PPP_VJ
+  unsigned char *cbuf;
+  struct slcompress *slcomp;
+#endif
+#ifdef CONFIG_IPPP_FILTER
+  struct sock_filter *pass_filter;	/* filter for packets to pass */
+  struct sock_filter *active_filter;	/* filter for pkts to reset idle */
+  unsigned pass_len, active_len;
+#endif
+  unsigned long debug;
+  struct isdn_ppp_compressor *compressor,*decompressor;
+  struct isdn_ppp_compressor *link_compressor,*link_decompressor;
+  void *decomp_stat,*comp_stat,*link_decomp_stat,*link_comp_stat;
+  struct ippp_ccp_reset *reset;	/* Allocated on demand, may never be needed */
+  unsigned long compflags;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
new file mode 100644
index 000000000000..7a4eacd77cb2
--- /dev/null
+++ b/include/linux/isdnif.h
@@ -0,0 +1,547 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __ISDNIF_H__
+#define __ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+
+/***************************************************************************/
+/* Extensions made by Werner Cornelius (werner@ikt.de)                     */
+/*                                                                         */ 
+/* The proceed command holds a incoming call in a state to leave processes */
+/* enough time to check whether ist should be accepted.                    */
+/* The PROT_IO Command extends the interface to make protocol dependent    */
+/* features available (call diversion, call waiting...).                   */
+/*                                                                         */ 
+/* The PROT_IO Command is executed with the desired driver id and the arg  */
+/* parameter coded as follows:                                             */
+/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE    */
+/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
+/* Any additional data is protocol and command specific.                   */
+/* This mechanism also applies to the statcallb callback STAT_PROT.        */    
+/*                                                                         */
+/* This suggested extension permits an easy expansion of protocol specific */
+/* handling. Extensions may be added at any time without changing the HL   */
+/* driver code and not getting conflicts without certifications.           */
+/* The well known CAPI 2.0 interface handles such extensions in a similar  */
+/* way. Perhaps a protocol specific module may be added and separately     */
+/* loaded and linked to the basic isdn module for handling.                */                    
+/***************************************************************************/
+
+/*****************/
+/* DSS1 commands */ 
+/*****************/
+#define DSS1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_EURO)   /* invoke a supplementary service */
+#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO)   /* abort a invoke cmd */
+
+/*******************************/
+/* DSS1 Status callback values */
+/*******************************/
+#define DSS1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_EURO)   /* Result for invocation */
+#define DSS1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_EURO)   /* Error Return for invocation */
+#define DSS1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_EURO)   /* Deliver invoke broadcast info */
+
+
+/*********************************************************************/
+/* structures for DSS1 commands and callback                         */
+/*                                                                   */
+/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
+/* timeout, datalen and data fields must be set before calling.      */
+/*                                                                   */
+/* The return value is a positive hl_id value also delivered in the  */
+/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
+/* A negative return value signals errors in LL. So if the return    */
+/* value is <= 0 no action in LL will be taken -> request ignored    */
+/*                                                                   */
+/* The timeout field must be filled with a positive value specifying */
+/* the amount of time the INVOKED process waits for a reaction from  */
+/* the network.                                                      */
+/* If a response (either error or result) is received during this    */
+/* intervall, a reporting callback is initiated and the process will */
+/* be deleted, the hl identifier will be freed.                      */
+/* If no response is received during the specified intervall, a error*/
+/* callback is initiated with timeout set to -1 and a datalen set    */
+/* to 0.                                                             */
+/* If timeout is set to a value <= 0 during INVOCATION the process is*/
+/* immediately deleted after sending the data. No callback occurs !  */
+/*                                                                   */
+/* A currently waiting process may be aborted with INVOKE_ABORT. No  */
+/* callback will occur when a process has been aborted.              */
+/*                                                                   */
+/* Broadcast invoke frames from the network are reported via the     */
+/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
+/* are supplied by the network and not by the HL.                    */   
+/*********************************************************************/
+
+/*****************/
+/* NI1 commands */ 
+/*****************/
+#define NI1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_NI1)   /* invoke a supplementary service */
+#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1)   /* abort a invoke cmd */
+
+/*******************************/
+/* NI1 Status callback values */
+/*******************************/
+#define NI1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_NI1)   /* Result for invocation */
+#define NI1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_NI1)   /* Error Return for invocation */
+#define NI1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_NI1)   /* Deliver invoke broadcast info */
+
+typedef struct
+  { ulong ll_id; /* ID supplied by LL when executing    */
+		 /* a command and returned by HL for    */
+                 /* INVOKE_RES and INVOKE_ERR           */
+    int hl_id;   /* ID supplied by HL when called       */
+                 /* for executing a cmd and delivered   */
+                 /* for results and errors              */
+                 /* must be supplied by LL when aborting*/  
+    int proc;    /* invoke procedure used by CMD_INVOKE */
+                 /* returned by callback and broadcast  */ 
+    int timeout; /* timeout for INVOKE CMD in ms        */
+                 /* -1  in stat callback when timed out */
+                 /* error value when error callback     */
+    int datalen; /* length of cmd or stat data          */
+    u_char *data;/* pointer to data delivered or send   */
+  } isdn_cmd_stat;
+
+/*
+ * Commands from linklevel to lowlevel
+ *
+ */
+#define ISDN_CMD_IOCTL    0       /* Perform ioctl                         */
+#define ISDN_CMD_DIAL     1       /* Dial out                              */
+#define ISDN_CMD_ACCEPTD  2       /* Accept an incoming call on D-Chan.    */
+#define ISDN_CMD_ACCEPTB  3       /* Request B-Channel connect.            */
+#define ISDN_CMD_HANGUP   4       /* Hangup                                */
+#define ISDN_CMD_CLREAZ   5       /* Clear EAZ(s) of channel               */
+#define ISDN_CMD_SETEAZ   6       /* Set EAZ(s) of channel                 */
+#define ISDN_CMD_GETEAZ   7       /* Get EAZ(s) of channel                 */
+#define ISDN_CMD_SETSIL   8       /* Set Service-Indicator-List of channel */
+#define ISDN_CMD_GETSIL   9       /* Get Service-Indicator-List of channel */
+#define ISDN_CMD_SETL2   10       /* Set B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_GETL2   11       /* Get B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_SETL3   12       /* Set B-Chan. Layer3-Parameter          */
+#define ISDN_CMD_GETL3   13       /* Get B-Chan. Layer3-Parameter          */
+// #define ISDN_CMD_LOCK    14       /* Signal usage by upper levels          */
+// #define ISDN_CMD_UNLOCK  15       /* Release usage-lock                    */
+#define ISDN_CMD_SUSPEND 16       /* Suspend connection                    */
+#define ISDN_CMD_RESUME  17       /* Resume connection                     */
+#define ISDN_CMD_PROCEED 18       /* Proceed with call establishment       */
+#define ISDN_CMD_ALERT   19       /* Alert after Proceeding                */
+#define ISDN_CMD_REDIR   20       /* Redir a incoming call                 */
+#define ISDN_CMD_PROT_IO 21       /* Protocol specific commands            */
+#define CAPI_PUT_MESSAGE 22       /* CAPI message send down or up          */
+#define ISDN_CMD_FAXCMD  23       /* FAX commands to HL-driver             */
+#define ISDN_CMD_AUDIO   24       /* DSP, DTMF, ... settings               */
+
+/*
+ * Status-Values delivered from lowlevel to linklevel via
+ * statcallb().
+ *
+ */
+#define ISDN_STAT_STAVAIL 256    /* Raw status-data available             */
+#define ISDN_STAT_ICALL   257    /* Incoming call detected                */
+#define ISDN_STAT_RUN     258    /* Signal protocol-code is running       */
+#define ISDN_STAT_STOP    259    /* Signal halt of protocol-code          */
+#define ISDN_STAT_DCONN   260    /* Signal D-Channel connect              */
+#define ISDN_STAT_BCONN   261    /* Signal B-Channel connect              */
+#define ISDN_STAT_DHUP    262    /* Signal D-Channel disconnect           */
+#define ISDN_STAT_BHUP    263    /* Signal B-Channel disconnect           */
+#define ISDN_STAT_CINF    264    /* Charge-Info                           */
+#define ISDN_STAT_LOAD    265    /* Signal new lowlevel-driver is loaded  */
+#define ISDN_STAT_UNLOAD  266    /* Signal unload of lowlevel-driver      */
+#define ISDN_STAT_BSENT   267    /* Signal packet sent                    */
+#define ISDN_STAT_NODCH   268    /* Signal no D-Channel                   */
+#define ISDN_STAT_ADDCH   269    /* Add more Channels                     */
+#define ISDN_STAT_CAUSE   270    /* Cause-Message                         */
+#define ISDN_STAT_ICALLW  271    /* Incoming call without B-chan waiting  */
+#define ISDN_STAT_REDIR   272    /* Redir result                          */
+#define ISDN_STAT_PROT    273    /* protocol IO specific callback         */
+#define ISDN_STAT_DISPLAY 274    /* deliver a received display message    */
+#define ISDN_STAT_L1ERR   275    /* Signal Layer-1 Error                  */
+#define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */
+#define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */
+#define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */
+
+/*
+ * Audio commands
+ */
+#define ISDN_AUDIO_SETDD	0	/* Set DTMF detection           */
+#define ISDN_AUDIO_DTMF		1	/* Rx/Tx DTMF                   */
+
+/*
+ * Values for errcode field
+ */
+#define ISDN_STAT_L1ERR_SEND 1
+#define ISDN_STAT_L1ERR_RECV 2
+
+/*
+ * Values for feature-field of interface-struct.
+ */
+/* Layer 2 */
+#define ISDN_FEATURE_L2_X75I    (0x0001 << ISDN_PROTO_L2_X75I)
+#define ISDN_FEATURE_L2_X75UI   (0x0001 << ISDN_PROTO_L2_X75UI)
+#define ISDN_FEATURE_L2_X75BUI  (0x0001 << ISDN_PROTO_L2_X75BUI)
+#define ISDN_FEATURE_L2_HDLC    (0x0001 << ISDN_PROTO_L2_HDLC)
+#define ISDN_FEATURE_L2_TRANS   (0x0001 << ISDN_PROTO_L2_TRANS)
+#define ISDN_FEATURE_L2_X25DTE  (0x0001 << ISDN_PROTO_L2_X25DTE)
+#define ISDN_FEATURE_L2_X25DCE  (0x0001 << ISDN_PROTO_L2_X25DCE)
+#define ISDN_FEATURE_L2_V11096  (0x0001 << ISDN_PROTO_L2_V11096)
+#define ISDN_FEATURE_L2_V11019  (0x0001 << ISDN_PROTO_L2_V11019)
+#define ISDN_FEATURE_L2_V11038  (0x0001 << ISDN_PROTO_L2_V11038)
+#define ISDN_FEATURE_L2_MODEM   (0x0001 << ISDN_PROTO_L2_MODEM)
+#define ISDN_FEATURE_L2_FAX	(0x0001 << ISDN_PROTO_L2_FAX)
+#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
+
+#define ISDN_FEATURE_L2_MASK    (0x0FFFF) /* Max. 16 protocols */
+#define ISDN_FEATURE_L2_SHIFT   (0)
+
+/* Layer 3 */
+#define ISDN_FEATURE_L3_TRANS   (0x10000 << ISDN_PROTO_L3_TRANS)
+#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
+#define ISDN_FEATURE_L3_FCLASS2	(0x10000 << ISDN_PROTO_L3_FCLASS2)
+#define ISDN_FEATURE_L3_FCLASS1	(0x10000 << ISDN_PROTO_L3_FCLASS1)
+
+#define ISDN_FEATURE_L3_MASK    (0x0FF0000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_L3_SHIFT   (16)
+
+/* Signaling */
+#define ISDN_FEATURE_P_UNKNOWN  (0x1000000 << ISDN_PTYPE_UNKNOWN)
+#define ISDN_FEATURE_P_1TR6     (0x1000000 << ISDN_PTYPE_1TR6)
+#define ISDN_FEATURE_P_EURO     (0x1000000 << ISDN_PTYPE_EURO)
+#define ISDN_FEATURE_P_NI1      (0x1000000 << ISDN_PTYPE_NI1)
+
+#define ISDN_FEATURE_P_MASK     (0x0FF000000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_P_SHIFT    (24)
+
+typedef struct setup_parm {
+    unsigned char phone[32];	/* Remote Phone-Number */
+    unsigned char eazmsn[32];	/* Local EAZ or MSN    */
+    unsigned char si1;      /* Service Indicator 1 */
+    unsigned char si2;      /* Service Indicator 2 */
+    unsigned char plan;     /* Numbering plan      */
+    unsigned char screen;   /* Screening info      */
+} setup_parm;
+
+
+#ifdef CONFIG_ISDN_TTY_FAX
+/* T.30 Fax G3 */
+
+#define FAXIDLEN 21
+
+typedef struct T30_s {
+	/* session parameters */
+	__u8 resolution		__attribute__ ((packed));
+	__u8 rate		__attribute__ ((packed));
+	__u8 width		__attribute__ ((packed));
+	__u8 length		__attribute__ ((packed));
+	__u8 compression	__attribute__ ((packed));
+	__u8 ecm		__attribute__ ((packed));
+	__u8 binary		__attribute__ ((packed));
+	__u8 scantime		__attribute__ ((packed));
+	__u8 id[FAXIDLEN]	__attribute__ ((packed));
+	/* additional parameters */
+	__u8 phase		__attribute__ ((packed));
+	__u8 direction		__attribute__ ((packed));
+	__u8 code		__attribute__ ((packed));
+	__u8 badlin		__attribute__ ((packed));
+	__u8 badmul		__attribute__ ((packed));
+	__u8 bor		__attribute__ ((packed));
+	__u8 fet		__attribute__ ((packed));
+	__u8 pollid[FAXIDLEN]	__attribute__ ((packed));
+	__u8 cq			__attribute__ ((packed));
+	__u8 cr			__attribute__ ((packed));
+	__u8 ctcrty		__attribute__ ((packed));
+	__u8 minsp		__attribute__ ((packed));
+	__u8 phcto		__attribute__ ((packed));
+	__u8 rel		__attribute__ ((packed));
+	__u8 nbc		__attribute__ ((packed));
+	/* remote station parameters */
+	__u8 r_resolution	__attribute__ ((packed));
+	__u8 r_rate		__attribute__ ((packed));
+	__u8 r_width		__attribute__ ((packed));
+	__u8 r_length		__attribute__ ((packed));
+	__u8 r_compression	__attribute__ ((packed));
+	__u8 r_ecm		__attribute__ ((packed));
+	__u8 r_binary		__attribute__ ((packed));
+	__u8 r_scantime		__attribute__ ((packed));
+	__u8 r_id[FAXIDLEN]	__attribute__ ((packed));
+	__u8 r_code		__attribute__ ((packed));
+} T30_s;
+
+#define ISDN_TTY_FAX_CONN_IN	0
+#define ISDN_TTY_FAX_CONN_OUT	1
+
+#define ISDN_TTY_FAX_FCON	0
+#define ISDN_TTY_FAX_DIS 	1
+#define ISDN_TTY_FAX_FTT 	2
+#define ISDN_TTY_FAX_MCF 	3
+#define ISDN_TTY_FAX_DCS 	4
+#define ISDN_TTY_FAX_TRAIN_OK	5
+#define ISDN_TTY_FAX_EOP 	6
+#define ISDN_TTY_FAX_EOM 	7
+#define ISDN_TTY_FAX_MPS 	8
+#define ISDN_TTY_FAX_DTC 	9
+#define ISDN_TTY_FAX_RID 	10
+#define ISDN_TTY_FAX_HNG 	11
+#define ISDN_TTY_FAX_DT  	12
+#define ISDN_TTY_FAX_FCON_I	13
+#define ISDN_TTY_FAX_DR  	14
+#define ISDN_TTY_FAX_ET  	15
+#define ISDN_TTY_FAX_CFR 	16
+#define ISDN_TTY_FAX_PTS 	17
+#define ISDN_TTY_FAX_SENT	18
+
+#define ISDN_FAX_PHASE_IDLE	0
+#define ISDN_FAX_PHASE_A	1
+#define ISDN_FAX_PHASE_B   	2
+#define ISDN_FAX_PHASE_C   	3
+#define ISDN_FAX_PHASE_D   	4
+#define ISDN_FAX_PHASE_E   	5
+
+#endif /* TTY_FAX */
+
+#define ISDN_FAX_CLASS1_FAE	0
+#define ISDN_FAX_CLASS1_FTS	1
+#define ISDN_FAX_CLASS1_FRS	2
+#define ISDN_FAX_CLASS1_FTM	3
+#define ISDN_FAX_CLASS1_FRM	4
+#define ISDN_FAX_CLASS1_FTH	5
+#define ISDN_FAX_CLASS1_FRH	6
+#define ISDN_FAX_CLASS1_CTRL	7
+
+#define ISDN_FAX_CLASS1_OK	0
+#define ISDN_FAX_CLASS1_CONNECT	1
+#define ISDN_FAX_CLASS1_NOCARR	2
+#define ISDN_FAX_CLASS1_ERROR	3
+#define ISDN_FAX_CLASS1_FCERROR	4
+#define ISDN_FAX_CLASS1_QUERY	5
+
+typedef struct {
+	__u8	cmd;
+	__u8	subcmd;
+	__u8	para[50];
+} aux_s;
+
+#define AT_COMMAND	0
+#define AT_EQ_VALUE	1
+#define AT_QUERY	2
+#define AT_EQ_QUERY	3
+
+/* CAPI structs */
+
+/* this is compatible to the old union size */
+#define MAX_CAPI_PARA_LEN 50
+
+typedef struct {
+	/* Header */
+	__u16 Length;
+	__u16 ApplId;
+	__u8 Command;
+	__u8 Subcommand;
+	__u16 Messagenumber;
+
+	/* Parameter */
+	union {
+		__u32 Controller;
+		__u32 PLCI;
+		__u32 NCCI;
+	} adr;
+	__u8 para[MAX_CAPI_PARA_LEN];
+} capi_msg;
+
+/*
+ * Structure for exchanging above infos
+ *
+ */
+typedef struct {
+	int   driver;		/* Lowlevel-Driver-ID            */
+	int   command;		/* Command or Status (see above) */
+	ulong arg;		/* Additional Data               */
+	union {
+		ulong errcode;	/* Type of error with STAT_L1ERR	*/
+		int length;	/* Amount of bytes sent with STAT_BSENT	*/
+		u_char num[50];	/* Additional Data			*/
+		setup_parm setup;/* For SETUP msg			*/
+		capi_msg cmsg;	/* For CAPI like messages		*/
+		char display[85];/* display message data		*/ 
+		isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result	*/
+		aux_s aux;	/* for modem commands/indications	*/
+#ifdef CONFIG_ISDN_TTY_FAX
+		T30_s	*fax;	/* Pointer to ttys fax struct		*/
+#endif
+		ulong userdata;	/* User Data */
+	} parm;
+} isdn_ctrl;
+
+#define dss1_io    isdn_io
+#define ni1_io     isdn_io
+
+/*
+ * The interface-struct itself (initialized at load-time of lowlevel-driver)
+ *
+ * See Documentation/isdn/INTERFACE for a description, how the communication
+ * between the ISDN subsystem and its drivers is done.
+ *
+ */
+typedef struct {
+  struct module *owner;
+
+  /* Number of channels supported by this driver
+   */
+  int channels;
+
+  /* 
+   * Maximum Size of transmit/receive-buffer this driver supports.
+   */
+  int maxbufsize;
+
+  /* Feature-Flags for this driver.
+   * See defines ISDN_FEATURE_... for Values
+   */
+  unsigned long features;
+
+  /*
+   * Needed for calculating
+   * dev->hard_header_len = linklayer header + hl_hdrlen;
+   * Drivers, not supporting sk_buff's should set this to 0.
+   */
+  unsigned short hl_hdrlen;
+
+  /*
+   * Receive-Callback using sk_buff's
+   * Parameters:
+   *             int                    Driver-ID
+   *             int                    local channel-number (0 ...)
+   *             struct sk_buff *skb    received Data
+   */
+  void (*rcvcallb_skb)(int, int, struct sk_buff *);
+
+  /* Status-Callback
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_STAT_... constants.
+   *                   arg     = depending on status-type.
+   *                   num     = depending on status-type.
+   */
+  int (*statcallb)(isdn_ctrl*);
+
+  /* Send command
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_CMD_... constants.
+   *                   arg     = depending on command.
+   *                   num     = depending on command.
+   */
+  int (*command)(isdn_ctrl*);
+
+  /*
+   * Send data using sk_buff's
+   * Parameters:
+   *             int                    driverId
+   *             int                    local channel-number (0...)
+   *             int                    Flag: Need ACK for this packet.
+   *             struct sk_buff *skb    Data to send
+   */
+  int (*writebuf_skb) (int, int, int, struct sk_buff *);
+
+  /* Send raw D-Channel-Commands
+   * Parameters:
+   *             u_char pointer data
+   *             int    length of data
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*writecmd)(const u_char __user *, int, int, int);
+
+  /* Read raw Status replies
+   *             u_char pointer data (volatile)
+   *             int    length of buffer
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*readstat)(u_char __user *, int, int, int);
+
+  char id[20];
+} isdn_if;
+
+/*
+ * Function which must be called by lowlevel-driver at loadtime with
+ * the following fields of above struct set:
+ *
+ * channels     Number of channels that will be supported.
+ * hl_hdrlen    Space to preserve in sk_buff's when sending. Drivers, not
+ *              supporting sk_buff's should set this to 0.
+ * command      Address of Command-Handler.
+ * features     Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
+ * writebuf_skb Address of Skbuff-Send-Handler.
+ * writecmd        "    "  D-Channel  " which accepts raw D-Ch-Commands.
+ * readstat        "    "  D-Channel  " which delivers raw Status-Data.
+ *
+ * The linklevel-driver fills the following fields:
+ *
+ * channels      Driver-ID assigned to this driver. (Must be used on all
+ *               subsequent callbacks.
+ * rcvcallb_skb  Address of handler for received Skbuff's.
+ * statcallb        "    "     "    for status-changes.
+ *
+ */
+extern int register_isdn(isdn_if*);
+#include <asm/uaccess.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ISDNIF_H__ */
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
new file mode 100644
index 000000000000..7c6eae7f6ed7
--- /dev/null
+++ b/include/linux/isicom.h
@@ -0,0 +1,131 @@
+#ifndef _LINUX_ISICOM_H
+#define _LINUX_ISICOM_H
+
+/*#define		ISICOM_DEBUG*/
+/*#define		ISICOM_DEBUG_DTR_RTS*/
+
+
+/*
+ *	Firmware Loader definitions ...
+ */
+ 
+#define		__MultiTech		('M'<<8)
+#define		MIOCTL_LOAD_FIRMWARE	(__MultiTech | 0x01)
+#define         MIOCTL_READ_FIRMWARE    (__MultiTech | 0x02)
+#define         MIOCTL_XFER_CTRL	(__MultiTech | 0x03)
+#define         MIOCTL_RESET_CARD	(__MultiTech | 0x04)
+
+#define		DATA_SIZE	16
+
+typedef	struct	{
+		unsigned short	exec_segment;
+		unsigned short	exec_addr;
+}	exec_record;
+
+typedef	struct	{
+		int		board;		/* Board to load */
+		unsigned short	addr;
+		unsigned short	count;
+}	bin_header;
+
+typedef	struct	{
+		int		board;		/* Board to load */
+		unsigned short	addr;
+		unsigned short	count;
+		unsigned short	segment;
+		unsigned char	bin_data[DATA_SIZE];
+}	bin_frame;
+
+#ifdef __KERNEL__
+
+#define		YES	1
+#define		NO	0
+
+#define		ISILOAD_MISC_MINOR	155	/* /dev/isctl */
+#define		ISILOAD_NAME		"ISILoad"
+
+/*	
+ *  ISICOM Driver definitions ...
+ *
+ */
+
+#define		ISICOM_NAME	"ISICom"
+
+/*
+ *      PCI definitions
+ */
+
+ #define        DEVID_COUNT     9
+ #define        VENDOR_ID       0x10b5
+
+/*
+ *	These are now officially allocated numbers
+ */
+
+#define		ISICOM_NMAJOR	112	/* normal  */
+#define		ISICOM_CMAJOR	113	/* callout */
+#define		ISICOM_MAGIC	(('M' << 8) | 'T')
+
+#define		WAKEUP_CHARS	256	/* hard coded for now	*/ 
+#define		TX_SIZE		254 
+ 
+#define		BOARD_COUNT	4
+#define		PORT_COUNT	(BOARD_COUNT*16)
+
+#define		SERIAL_TYPE_NORMAL	1
+
+/*   character sizes  */
+
+#define		ISICOM_CS5		0x0000
+#define		ISICOM_CS6		0x0001
+#define		ISICOM_CS7		0x0002
+#define		ISICOM_CS8		0x0003
+
+/* stop bits */
+
+#define		ISICOM_1SB		0x0000
+#define		ISICOM_2SB		0x0004
+
+/* parity */
+
+#define		ISICOM_NOPAR		0x0000
+#define		ISICOM_ODPAR		0x0008
+#define		ISICOM_EVPAR		0x0018
+
+/* flow control */
+
+#define		ISICOM_CTSRTS		0x03
+#define		ISICOM_INITIATE_XONXOFF	0x04
+#define		ISICOM_RESPOND_XONXOFF	0x08
+
+#define InterruptTheCard(base) (outw(0,(base)+0xc)) 
+#define ClearInterrupt(base) (inw((base)+0x0a))	
+
+#define	BOARD(line)  (((line) >> 4) & 0x3)
+
+	/*	isi kill queue bitmap	*/
+	
+#define		ISICOM_KILLTX		0x01
+#define		ISICOM_KILLRX		0x02
+
+	/* isi_board status bitmap */
+	
+#define		FIRMWARE_LOADED		0x0001
+#define		BOARD_ACTIVE		0x0002
+
+ 	/* isi_port status bitmap  */
+
+#define		ISI_CTS			0x1000
+#define		ISI_DSR			0x2000
+#define		ISI_RI			0x4000
+#define		ISI_DCD			0x8000
+#define		ISI_DTR			0x0100
+#define		ISI_RTS			0x0200
+
+
+#define		ISI_TXOK		0x0001 
+ 
+#endif	/*	__KERNEL__	*/
+
+#endif	/*	ISICOM_H	*/
+
diff --git a/include/linux/iso_fs.h b/include/linux/iso_fs.h
new file mode 100644
index 000000000000..099039d4b10d
--- /dev/null
+++ b/include/linux/iso_fs.h
@@ -0,0 +1,312 @@
+
+#ifndef _ISOFS_FS_H
+#define _ISOFS_FS_H
+
+#include <linux/types.h>
+/*
+ * The isofs filesystem constants/structures
+ */
+
+/* This part borrowed from the bsd386 isofs */
+#define ISODCL(from, to) (to - from + 1)
+
+struct iso_volume_descriptor {
+	char type[ISODCL(1,1)]; /* 711 */
+	char id[ISODCL(2,6)];
+	char version[ISODCL(7,7)];
+	char data[ISODCL(8,2048)];
+};
+
+/* volume descriptor types */
+#define ISO_VD_PRIMARY 1
+#define ISO_VD_SUPPLEMENTARY 2
+#define ISO_VD_END 255
+
+#define ISO_STANDARD_ID "CD001"
+
+struct iso_primary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char unused1			[ISODCL (  8,   8)];
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char unused3			[ISODCL ( 89, 120)];
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+/* Almost the same as the primary descriptor but two fields are specified */
+struct iso_supplementary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char flags			[ISODCL (  8,   8)]; /* 853 */
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char escape			[ISODCL ( 89, 120)]; /* 856 */
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+
+#define HS_STANDARD_ID "CDROM"
+
+struct  hs_volume_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char data[ISODCL(16,2048)];
+};
+
+
+struct hs_primary_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char unused1			[ISODCL ( 16,  16)]; /* 711 */
+	char system_id			[ISODCL ( 17,  48)]; /* achars */
+	char volume_id			[ISODCL ( 49,  80)]; /* dchars */
+	char unused2			[ISODCL ( 81,  88)]; /* 733 */
+	char volume_space_size		[ISODCL ( 89,  96)]; /* 733 */
+	char unused3			[ISODCL ( 97, 128)]; /* 733 */
+	char volume_set_size		[ISODCL (129, 132)]; /* 723 */
+	char volume_sequence_number	[ISODCL (133, 136)]; /* 723 */
+	char logical_block_size		[ISODCL (137, 140)]; /* 723 */
+	char path_table_size		[ISODCL (141, 148)]; /* 733 */
+	char type_l_path_table		[ISODCL (149, 152)]; /* 731 */
+	char unused4			[ISODCL (153, 180)]; /* 733 */
+	char root_directory_record	[ISODCL (181, 214)]; /* 9.1 */
+};
+
+/* We use this to help us look up the parent inode numbers. */
+
+struct iso_path_table{
+	unsigned char  name_len[2];	/* 721 */
+	char extent[4];		/* 731 */
+	char  parent[2];	/* 721 */
+	char name[0];
+} __attribute__((packed));
+
+/* high sierra is identical to iso, except that the date is only 6 bytes, and
+   there is an extra reserved byte after the flags */
+
+struct iso_directory_record {
+	char length			[ISODCL (1, 1)]; /* 711 */
+	char ext_attr_length		[ISODCL (2, 2)]; /* 711 */
+	char extent			[ISODCL (3, 10)]; /* 733 */
+	char size			[ISODCL (11, 18)]; /* 733 */
+	char date			[ISODCL (19, 25)]; /* 7 by 711 */
+	char flags			[ISODCL (26, 26)];
+	char file_unit_size		[ISODCL (27, 27)]; /* 711 */
+	char interleave			[ISODCL (28, 28)]; /* 711 */
+	char volume_sequence_number	[ISODCL (29, 32)]; /* 723 */
+	unsigned char name_len		[ISODCL (33, 33)]; /* 711 */
+	char name			[0];
+} __attribute__((packed));
+
+#define ISOFS_BLOCK_BITS 11
+#define ISOFS_BLOCK_SIZE 2048
+
+#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
+#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
+
+#define ISOFS_SUPER_MAGIC 0x9660
+
+#ifdef __KERNEL__
+/* Number conversion inlines, named after the section in ISO 9660
+   they correspond to. */
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/iso_fs_i.h>
+#include <linux/iso_fs_sb.h>
+
+static inline struct isofs_sb_info *ISOFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct iso_inode_info *ISOFS_I(struct inode *inode)
+{
+	return container_of(inode, struct iso_inode_info, vfs_inode);
+}
+
+static inline int isonum_711(char *p)
+{
+	return *(u8 *)p;
+}
+static inline int isonum_712(char *p)
+{
+	return *(s8 *)p;
+}
+static inline unsigned int isonum_721(char *p)
+{
+	return le16_to_cpu(get_unaligned((__le16 *)p));
+}
+static inline unsigned int isonum_722(char *p)
+{
+	return be16_to_cpu(get_unaligned((__le16 *)p));
+}
+static inline unsigned int isonum_723(char *p)
+{
+	/* Ignore bigendian datum due to broken mastering programs */
+	return le16_to_cpu(get_unaligned((__le16 *)p));
+}
+static inline unsigned int isonum_731(char *p)
+{
+	return le32_to_cpu(get_unaligned((__le32 *)p));
+}
+static inline unsigned int isonum_732(char *p)
+{
+	return be32_to_cpu(get_unaligned((__le32 *)p));
+}
+static inline unsigned int isonum_733(char *p)
+{
+	/* Ignore bigendian datum due to broken mastering programs */
+	return le32_to_cpu(get_unaligned((__le32 *)p));
+}
+extern int iso_date(char *, int);
+
+struct inode;		/* To make gcc happy */
+
+extern int parse_rock_ridge_inode(struct iso_directory_record *, struct inode *);
+extern int get_rock_ridge_filename(struct iso_directory_record *, char *, struct inode *);
+extern int isofs_name_translate(struct iso_directory_record *, char *, struct inode *);
+
+int get_joliet_filename(struct iso_directory_record *, unsigned char *, struct inode *);
+int get_acorn_filename(struct iso_directory_record *, char *, struct inode *);
+
+extern struct dentry *isofs_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern struct buffer_head *isofs_bread(struct inode *, sector_t);
+extern int isofs_get_blocks(struct inode *, sector_t, struct buffer_head **, unsigned long);
+
+extern struct inode *isofs_iget(struct super_block *sb,
+                                unsigned long block,
+                                unsigned long offset);
+
+/* Because the inode number is no longer relevant to finding the
+ * underlying meta-data for an inode, we are free to choose a more
+ * convenient 32-bit number as the inode number.  The inode numbering
+ * scheme was recommended by Sergey Vlasov and Eric Lammerts. */
+static inline unsigned long isofs_get_ino(unsigned long block,
+					  unsigned long offset,
+					  unsigned long bufbits)
+{
+	return (block << (bufbits - 5)) | (offset >> 5);
+}
+
+/* Every directory can have many redundant directory entries scattered
+ * throughout the directory tree.  First there is the directory entry
+ * with the name of the directory stored in the parent directory.
+ * Then, there is the "." directory entry stored in the directory
+ * itself.  Finally, there are possibly many ".." directory entries
+ * stored in all the subdirectories.
+ *
+ * In order for the NFS get_parent() method to work and for the
+ * general consistency of the dcache, we need to make sure the
+ * "i_iget5_block" and "i_iget5_offset" all point to exactly one of
+ * the many redundant entries for each directory.  We normalize the
+ * block and offset by always making them point to the "."  directory.
+ *
+ * Notice that we do not use the entry for the directory with the name
+ * that is located in the parent directory.  Even though choosing this
+ * first directory is more natural, it is much easier to find the "."
+ * entry in the NFS get_parent() method because it is implicitly
+ * encoded in the "extent + ext_attr_length" fields of _all_ the
+ * redundant entries for the directory.  Thus, it can always be
+ * reached regardless of which directory entry you have in hand.
+ *
+ * This works because the "." entry is simply the first directory
+ * record when you start reading the file that holds all the directory
+ * records, and this file starts at "extent + ext_attr_length" blocks.
+ * Because the "." entry is always the first entry listed in the
+ * directories file, the normalized "offset" value is always 0.
+ *
+ * You should pass the directory entry in "de".  On return, "block"
+ * and "offset" will hold normalized values.  Only directories are
+ * affected making it safe to call even for non-directory file
+ * types. */
+static inline void
+isofs_normalize_block_and_offset(struct iso_directory_record* de,
+				 unsigned long *block,
+				 unsigned long *offset)
+{
+	/* Only directories are normalized. */
+	if (de->flags[0] & 2) {
+		*offset = 0;
+		*block = (unsigned long)isonum_733(de->extent)
+			+ (unsigned long)isonum_711(de->ext_attr_length);
+	}
+}
+
+extern struct inode_operations isofs_dir_inode_operations;
+extern struct file_operations isofs_dir_operations;
+extern struct address_space_operations isofs_symlink_aops;
+extern struct export_operations isofs_export_ops;
+
+/* The following macros are used to check for memory leaks. */
+#ifdef LEAK_CHECK
+#define free_s leak_check_free_s
+#define malloc leak_check_malloc
+#define sb_bread leak_check_bread
+#define brelse leak_check_brelse
+extern void * leak_check_malloc(unsigned int size);
+extern void leak_check_free_s(void * obj, int size);
+extern struct buffer_head * leak_check_bread(struct super_block *sb, int block);
+extern void leak_check_brelse(struct buffer_head * bh);
+#endif /* LEAK_CHECK */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/iso_fs_i.h b/include/linux/iso_fs_i.h
new file mode 100644
index 000000000000..59065e939eaa
--- /dev/null
+++ b/include/linux/iso_fs_i.h
@@ -0,0 +1,27 @@
+#ifndef _ISO_FS_I
+#define _ISO_FS_I
+
+#include <linux/fs.h>
+
+enum isofs_file_format {
+	isofs_file_normal = 0,
+	isofs_file_sparse = 1,
+	isofs_file_compressed = 2,
+};
+	
+/*
+ * iso fs inode data in memory
+ */
+struct iso_inode_info {
+	unsigned long i_iget5_block;
+	unsigned long i_iget5_offset;
+	unsigned int i_first_extent;
+	unsigned char i_file_format;
+	unsigned char i_format_parm[3];
+	unsigned long i_next_section_block;
+	unsigned long i_next_section_offset;
+	off_t i_section_size;
+	struct inode vfs_inode;
+};
+
+#endif
diff --git a/include/linux/iso_fs_sb.h b/include/linux/iso_fs_sb.h
new file mode 100644
index 000000000000..043b97b55b8d
--- /dev/null
+++ b/include/linux/iso_fs_sb.h
@@ -0,0 +1,34 @@
+#ifndef _ISOFS_FS_SB
+#define _ISOFS_FS_SB
+
+/*
+ * iso9660 super-block data in memory
+ */
+struct isofs_sb_info {
+	unsigned long s_ninodes;
+	unsigned long s_nzones;
+	unsigned long s_firstdatazone;
+	unsigned long s_log_zone_size;
+	unsigned long s_max_size;
+	
+	unsigned char s_high_sierra; /* A simple flag */
+	unsigned char s_mapping;
+	int           s_rock_offset; /* offset of SUSP fields within SU area */
+	unsigned char s_rock;
+	unsigned char s_joliet_level;
+	unsigned char s_utf8;
+	unsigned char s_cruft; /* Broken disks with high
+				  byte of length containing
+				  junk */
+	unsigned char s_unhide;
+	unsigned char s_nosuid;
+	unsigned char s_nodev;
+	unsigned char s_nocompress;
+
+	mode_t s_mode;
+	gid_t s_gid;
+	uid_t s_uid;
+	struct nls_table *s_nls_iocharset; /* Native language support table */
+};
+
+#endif
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
new file mode 100644
index 000000000000..5f4ee646c119
--- /dev/null
+++ b/include/linux/istallion.h
@@ -0,0 +1,132 @@
+/*****************************************************************************/
+
+/*
+ *	istallion.h  -- stallion intelligent multiport serial driver.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/version.h>
+
+/*****************************************************************************/
+#ifndef	_ISTALLION_H
+#define	_ISTALLION_H
+/*****************************************************************************/
+
+/*
+ *	Define important driver constants here.
+ */
+#define	STL_MAXBRDS		4
+#define	STL_MAXPANELS		4
+#define	STL_MAXPORTS		64
+#define	STL_MAXCHANS		(STL_MAXPORTS + 1)
+#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
+
+
+/*
+ *	Define a set of structures to hold all the board/panel/port info
+ *	for our ports. These will be dynamically allocated as required at
+ *	driver initialization time.
+ */
+
+/*
+ *	Port and board structures to hold status info about each object.
+ *	The board structure contains pointers to structures for each port
+ *	connected to it. Panels are not distinguished here, since
+ *	communication with the slave board will always be on a per port
+ *	basis.
+ */
+typedef struct {
+	unsigned long		magic;
+	int			portnr;
+	int			panelnr;
+	int			brdnr;
+	unsigned long		state;
+	int			devnr;
+	int			flags;
+	int			baud_base;
+	int			custom_divisor;
+	int			close_delay;
+	int			closing_wait;
+	int			refcount;
+	int			openwaitcnt;
+	int			rc;
+	int			argsize;
+	void			*argp;
+	unsigned int		rxmarkmsk;
+	struct tty_struct	*tty;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	wait_queue_head_t	raw_wait;
+	struct work_struct	tqhangup;
+	asysigs_t		asig;
+	unsigned long		addr;
+	unsigned long		rxoffset;
+	unsigned long		txoffset;
+	unsigned long		sigs;
+	unsigned long		pflag;
+	unsigned int		rxsize;
+	unsigned int		txsize;
+	unsigned char		reqbit;
+	unsigned char		portidx;
+	unsigned char		portbit;
+} stliport_t;
+
+/*
+ *	Use a structure of function pointers to do board level operations.
+ *	These include, enable/disable, paging shared memory, interrupting, etc.
+ */
+typedef struct stlibrd {
+	unsigned long	magic;
+	int		brdnr;
+	int		brdtype;
+	int		state;
+	int		nrpanels;
+	int		nrports;
+	int		nrdevs;
+	unsigned int	iobase;
+	int		iosize;
+	unsigned long	memaddr;
+	void		*membase;
+	int		memsize;
+	int		pagesize;
+	int		hostoffset;
+	int		slaveoffset;
+	int		bitsize;
+	int		enabval;
+	int		panels[STL_MAXPANELS];
+	int		panelids[STL_MAXPANELS];
+	void		(*init)(struct stlibrd *brdp);
+	void		(*enable)(struct stlibrd *brdp);
+	void		(*reenable)(struct stlibrd *brdp);
+	void		(*disable)(struct stlibrd *brdp);
+	char		*(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
+	void		(*intr)(struct stlibrd *brdp);
+	void		(*reset)(struct stlibrd *brdp);
+	stliport_t	*ports[STL_MAXPORTS];
+} stlibrd_t;
+
+
+/*
+ *	Define MAGIC numbers used for above structures.
+ */
+#define	STLI_PORTMAGIC	0xe671c7a1
+#define	STLI_BOARDMAGIC	0x4bc6c825
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/ite_gpio.h b/include/linux/ite_gpio.h
new file mode 100644
index 000000000000..b123a14292d3
--- /dev/null
+++ b/include/linux/ite_gpio.h
@@ -0,0 +1,66 @@
+/*
+ * FILE NAME ite_gpio.h
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Generic gpio.
+ *
+ *  Author: MontaVista Software, Inc.  <source@mvista.com>
+ *          Hai-Pao Fan <haipao@mvista.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ITE_GPIO_H
+#define __ITE_GPIO_H
+
+#include <linux/ioctl.h>
+
+struct ite_gpio_ioctl_data {
+	__u32 device;
+	__u32 mask;
+	__u32 data;
+};
+
+#define ITE_GPIO_IOCTL_BASE	'Z'
+
+#define ITE_GPIO_IN		_IOWR(ITE_GPIO_IOCTL_BASE, 0, struct ite_gpio_ioctl_data)
+#define ITE_GPIO_OUT		_IOW (ITE_GPIO_IOCTL_BASE, 1, struct ite_gpio_ioctl_data)
+#define	ITE_GPIO_INT_CTRL	_IOW (ITE_GPIO_IOCTL_BASE, 2, struct ite_gpio_ioctl_data)
+#define	ITE_GPIO_IN_STATUS	_IOW (ITE_GPIO_IOCTL_BASE, 3, struct ite_gpio_ioctl_data)
+#define	ITE_GPIO_OUT_STATUS	_IOW (ITE_GPIO_IOCTL_BASE, 4, struct ite_gpio_ioctl_data)
+#define ITE_GPIO_GEN_CTRL	_IOW (ITE_GPIO_IOCTL_BASE, 5, struct ite_gpio_ioctl_data)
+#define ITE_GPIO_INT_WAIT	_IOW (ITE_GPIO_IOCTL_BASE, 6, struct ite_gpio_ioctl_data)
+
+#define	ITE_GPIO_PORTA	0x01
+#define	ITE_GPIO_PORTB	0x02
+#define	ITE_GPIO_PORTC	0x04
+
+extern int ite_gpio_in(__u32 device, __u32 mask, volatile __u32 *data);
+extern int ite_gpio_out(__u32 device, __u32 mask, __u32 data);
+extern int ite_gpio_int_ctrl(__u32 device, __u32 mask, __u32 data);
+extern int ite_gpio_in_status(__u32 device, __u32 mask, volatile __u32 *data);
+extern int ite_gpio_out_status(__u32 device, __u32 mask, __u32 data);
+extern int ite_gpio_gen_ctrl(__u32 device, __u32 mask, __u32 data);
+extern int ite_gpio_int_wait(__u32 device, __u32 mask, __u32 data);
+
+#endif
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
new file mode 100644
index 000000000000..88121166d715
--- /dev/null
+++ b/include/linux/ixjuser.h
@@ -0,0 +1,722 @@
+#ifndef __LINUX_IXJUSER_H
+#define __LINUX_IXJUSER_H
+
+/******************************************************************************
+ *
+ *    ixjuser.h
+ *
+ * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
+ * including the Internet PhoneJACK, Internet PhoneJACK Lite,
+ * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
+ * SmartCABLE
+ *
+ *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ * Author:          Ed Okerson, <eokerson@quicknet.net>
+ *    
+ * Contributors:    Greg Herlein, <gherlein@quicknet.net>
+ *                  David W. Erhart, <derhart@quicknet.net>
+ *                  John Sellers, <jsellers@quicknet.net>
+ *                  Mike Preston, <mpreston@quicknet.net>
+ *
+ * More information about the hardware related to this driver can be found
+ * at our website:    http://www.quicknet.net
+ *
+ * Fixes:
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+static char ixjuser_h_rcsid[] = "$Id: ixjuser.h,v 4.1 2001/08/05 00:17:37 craigs Exp $";
+
+#include <linux/telephony.h>
+
+
+/******************************************************************************
+*
+* IOCTL's used for the Quicknet Telephony Cards
+*
+* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
+* reset the SRAM values before futher use.
+*
+******************************************************************************/
+
+#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
+
+#define IXJCTL_RING                     PHONE_RING
+#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
+#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
+#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
+#define IXJCTL_RING_START		PHONE_RING_START
+#define IXJCTL_RING_STOP		PHONE_RING_STOP
+
+#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
+#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
+#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
+#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
+#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
+#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
+#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the record settings of the DSP
+*
+* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
+* Setting a lower depth reduces latency, but increases the demand of the
+* application to service the driver without frame loss.  The DSP has 480
+* bytes of physical buffer memory for the record channel so the true
+* maximum limit is determined by how many frames will fit in the buffer.
+*
+* 1 uncompressed (480 byte) 16-bit linear frame.
+* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
+* 15 TrueSpeech 8.5 frames.
+* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
+*
+* The default in the driver is currently set to 2 frames.
+*
+* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
+* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
+* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
+* against over-scaling, if the multiplication factor times the input
+* signal exceeds 16 bits, overflow distortion will occur.  The default
+* setting is 0x100 (1.0).
+*
+* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
+* the most recently recorded frame as a 16 bit value.
+******************************************************************************/
+
+#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
+#define IXJCTL_REC_START                PHONE_REC_START
+#define IXJCTL_REC_STOP                 PHONE_REC_STOP
+#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
+#define IXJCTL_FRAME			PHONE_FRAME
+#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
+#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
+
+typedef enum {
+	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
+	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
+	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
+	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
+	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
+	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
+	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
+	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
+	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
+} IXJ_FILTER_FREQ;
+
+typedef struct {
+	unsigned int filter;
+	IXJ_FILTER_FREQ freq;
+	char enable;
+} IXJ_FILTER;
+
+typedef struct {
+	char enable;
+	char en_filter;
+	unsigned int filter;
+	unsigned int on1;
+	unsigned int off1;
+	unsigned int on2;
+	unsigned int off2;
+	unsigned int on3;
+	unsigned int off3;
+} IXJ_FILTER_CADENCE;
+
+#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
+#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
+#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
+#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
+#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
+/******************************************************************************
+*
+* This IOCTL allows you to reassign values in the tone index table.  The
+* tone table has 32 entries (0 - 31), but the driver only allows entries
+* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
+* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
+* The positions used internally for Call Progress Tones are as follows:
+*    Dial Tone   - 25
+*    Ring Back   - 26
+*    Busy Signal - 27
+*
+* The freq values are calculated as:
+* freq = cos(2 * PI * frequency / 8000)
+*
+* The most commonly needed values are already calculated and listed in the
+* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
+* different gains, if you are only using a single frequency set the unused
+* one to 0.
+*
+* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
+* increments.
+*
+******************************************************************************/
+
+typedef enum {
+	hz20 = 0x7ffa,
+	hz50 = 0x7fe5,
+	hz133 = 0x7f4c,
+	hz200 = 0x7e6b,
+	hz261 = 0x7d50,		/* .63 C1  */
+	hz277 = 0x7cfa,		/* .18 CS1 */
+	hz293 = 0x7c9f,		/* .66 D1  */
+	hz300 = 0x7c75,
+	hz311 = 0x7c32,		/* .13 DS1 */
+	hz329 = 0x7bbf,		/* .63 E1  */
+	hz330 = 0x7bb8,
+	hz340 = 0x7b75,
+	hz349 = 0x7b37,		/* .23 F1  */
+	hz350 = 0x7b30,
+	hz360 = 0x7ae9,
+	hz369 = 0x7aa8,		/* .99 FS1 */
+	hz380 = 0x7a56,
+	hz392 = 0x79fa,		/* .00 G1  */
+	hz400 = 0x79bb,
+	hz415 = 0x7941,		/* .30 GS1 */
+	hz420 = 0x7918,
+	hz425 = 0x78ee,
+	hz435 = 0x7899,
+	hz440 = 0x786d,		/* .00 A1  */
+	hz445 = 0x7842,
+	hz450 = 0x7815,
+	hz452 = 0x7803,
+	hz466 = 0x7784,		/* .16 AS1 */
+	hz475 = 0x7731,
+	hz480 = 0x7701,
+	hz493 = 0x7685,		/* .88 B1  */
+	hz494 = 0x767b,
+	hz500 = 0x7640,
+	hz520 = 0x7578,
+	hz523 = 0x7559,		/* .25 C2  */
+	hz525 = 0x7544,
+	hz540 = 0x74a7,
+	hz554 = 0x7411,		/* .37 CS2 */
+	hz587 = 0x72a1,		/* .33 D2  */
+	hz590 = 0x727f,
+	hz600 = 0x720b,
+	hz620 = 0x711e,
+	hz622 = 0x7106,		/* .25 DS2 */
+	hz659 = 0x6f3b,		/* .26 E2  */
+	hz660 = 0x6f2e,
+	hz698 = 0x6d3d,		/* .46 F2  */
+	hz700 = 0x6d22,
+	hz739 = 0x6b09,		/* .99 FS2 */
+	hz740 = 0x6afa,
+	hz750 = 0x6a6c,
+	hz770 = 0x694b,
+	hz783 = 0x688b,		/* .99 G2  */
+	hz800 = 0x678d,
+	hz816 = 0x6698,
+	hz830 = 0x65bf,		/* .61 GS2 */
+	hz850 = 0x6484,
+	hz857 = 0x6414,
+	hz880 = 0x629f,		/* .00 A2  */
+	hz900 = 0x6154,
+	hz932 = 0x5f35,		/* .33 AS2 */
+	hz935 = 0x5f01,
+	hz941 = 0x5e9a,
+	hz942 = 0x5e88,
+	hz950 = 0x5dfd,
+	hz975 = 0x5c44,
+	hz1000 = 0x5a81,
+	hz1020 = 0x5912,
+	hz1050 = 0x56e2,
+	hz1100 = 0x5320,
+	hz1140 = 0x5007,
+	hz1200 = 0x4b3b,
+	hz1209 = 0x4a80,
+	hz1215 = 0x4a02,
+	hz1250 = 0x471c,
+	hz1300 = 0x42e0,
+	hz1330 = 0x4049,
+	hz1336 = 0x3fc4,
+	hz1366 = 0x3d22,
+	hz1380 = 0x3be4,
+	hz1400 = 0x3a1b,
+	hz1450 = 0x3596,
+	hz1477 = 0x331c,
+	hz1500 = 0x30fb,
+	hz1600 = 0x278d,
+	hz1633 = 0x2462,
+	hz1638 = 0x23e7,
+	hz1645 = 0x233a,
+	hz1750 = 0x18f8,
+	hz1800 = 0x1405,
+	hz1860 = 0xe0b,
+	hz2100 = 0xf5f6,
+	hz2130 = 0xf2f5,
+	hz2450 = 0xd3b3,
+	hz2750 = 0xb8e4
+} IXJ_FREQ;
+
+typedef enum {
+	C1 = hz261,
+	CS1 = hz277,
+	D1 = hz293,
+	DS1 = hz311,
+	E1 = hz329,
+	F1 = hz349,
+	FS1 = hz369,
+	G1 = hz392,
+	GS1 = hz415,
+	A1 = hz440,
+	AS1 = hz466,
+	B1 = hz493,
+	C2 = hz523,
+	CS2 = hz554,
+	D2 = hz587,
+	DS2 = hz622,
+	E2 = hz659,
+	F2 = hz698,
+	FS2 = hz739,
+	G2 = hz783,
+	GS2 = hz830,
+	A2 = hz880,
+	AS2 = hz932,
+} IXJ_NOTE;
+
+typedef struct {
+	int tone_index;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_TONE;
+
+#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
+
+/******************************************************************************
+*
+* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
+* Call Progress Tones (CPT).  This is accomplished by setting up an array of
+* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
+* the tone sequence.  The tone_on_time and tone_off time are in
+* 250 microsecond intervals.  A pointer to this array is passed to the
+* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
+* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
+* termination variable defines what to do at the end of a cadence, the
+* options are to play the cadence once and stop, to repeat the last
+* element of the cadence indefinitely, or to repeat the entire cadence
+* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
+* structures.  If the freq0 variable is non-zero, the tone table contents
+* for the tone_index are updated to the frequencies and gains defined.  It
+* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
+* table indexs are used in a cadence the frequency and gain variables will
+* be ignored.
+*
+* If the array elements contain frequency parameters the driver will
+* initialize the needed tone table elements and begin playing the tone,
+* there is no preset limit on the number of elements in the cadence.  If
+* there is more than one frequency used in the cadence, sequential elements
+* of different frequencies MUST use different tone table indexes.  Only one
+* cadence can be played at a time.  It is possible to build complex
+* cadences with multiple frequencies using 2 tone table indexes by
+* alternating between them.
+*
+******************************************************************************/
+
+typedef struct {
+	int index;
+	int tone_on_time;
+	int tone_off_time;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_CADENCE_ELEMENT;
+
+typedef enum {
+	PLAY_ONCE,
+	REPEAT_LAST_ELEMENT,
+	REPEAT_ALL
+} IXJ_CADENCE_TERM;
+
+typedef struct {
+	int elements_used;
+	IXJ_CADENCE_TERM termination;
+	IXJ_CADENCE_ELEMENT __user *ce;
+} IXJ_CADENCE;
+
+#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
+/******************************************************************************
+*
+* This group of IOCTLs deal with the playback settings of the DSP
+*
+******************************************************************************/
+
+#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
+#define IXJCTL_PLAY_START               PHONE_PLAY_START
+#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
+#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
+#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
+#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
+* of the DSP
+*
+* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
+* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
+* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
+******************************************************************************/
+#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
+#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
+#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
+
+#define AEC_OFF   0
+#define AEC_LOW   1
+#define AEC_MED   2
+#define AEC_HIGH  3
+#define AEC_AUTO  4
+#define AEC_AGC   5
+/******************************************************************************
+*
+* Call Progress Tones, DTMF, etc.
+* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
+* only.  If you pass a 1, DTMF is suppressed from the audio stream.
+* Tone on and off times are in 250 microsecond intervals so
+* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
+* will set the tone on time of board ixj1 to 360 * 250us = 90ms
+* the default values of tone on and off times is 840 or 210ms
+******************************************************************************/
+
+#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
+#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
+#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
+#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
+#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
+#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
+#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
+#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
+#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
+#define IXJCTL_BUSY			PHONE_BUSY
+#define IXJCTL_RINGBACK			PHONE_RINGBACK
+#define IXJCTL_DIALTONE			PHONE_DIALTONE
+#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
+
+/******************************************************************************
+* LineJACK specific IOCTLs
+*
+* The lsb 4 bits of the LED argument represent the state of each of the 4
+* LED's on the LineJACK
+******************************************************************************/
+
+#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
+#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
+
+/******************************************************************************
+* 
+* The master volume controls use attenuation with 32 levels from 0 to -62dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_MASTER_L		0x0000
+#define MIXER_MASTER_R		0x0100
+#define ATT00DB			0x00
+#define ATT02DB			0x01
+#define ATT04DB			0x02
+#define ATT06DB			0x03
+#define ATT08DB			0x04
+#define ATT10DB			0x05
+#define ATT12DB			0x06
+#define ATT14DB			0x07
+#define ATT16DB			0x08
+#define ATT18DB			0x09
+#define ATT20DB			0x0A
+#define ATT22DB			0x0B
+#define ATT24DB			0x0C
+#define ATT26DB			0x0D
+#define ATT28DB			0x0E
+#define ATT30DB			0x0F
+#define ATT32DB			0x10
+#define ATT34DB			0x11
+#define ATT36DB			0x12
+#define ATT38DB			0x13
+#define ATT40DB			0x14
+#define ATT42DB			0x15
+#define ATT44DB			0x16
+#define ATT46DB			0x17
+#define ATT48DB			0x18
+#define ATT50DB			0x19
+#define ATT52DB			0x1A
+#define ATT54DB			0x1B
+#define ATT56DB			0x1C
+#define ATT58DB			0x1D
+#define ATT60DB			0x1E
+#define ATT62DB			0x1F
+#define MASTER_MUTE		0x80
+
+/******************************************************************************
+* 
+* The input volume controls use gain with 32 levels from +12dB to -50dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_CD_L		0x0600
+#define MIXER_PORT_CD_R		0x0700
+#define MIXER_PORT_LINE_IN_L	0x0800
+#define MIXER_PORT_LINE_IN_R	0x0900
+#define MIXER_PORT_POTS_REC	0x0C00
+#define MIXER_PORT_MIC		0x0E00
+
+#define GAIN12DB		0x00
+#define GAIN10DB		0x01
+#define GAIN08DB		0x02
+#define GAIN06DB		0x03
+#define GAIN04DB		0x04
+#define GAIN02DB		0x05
+#define GAIN00DB		0x06
+#define GAIN_02DB		0x07
+#define GAIN_04DB		0x08
+#define GAIN_06DB		0x09
+#define GAIN_08DB		0x0A
+#define GAIN_10DB		0x0B
+#define GAIN_12DB		0x0C
+#define GAIN_14DB		0x0D
+#define GAIN_16DB		0x0E
+#define GAIN_18DB		0x0F
+#define GAIN_20DB		0x10
+#define GAIN_22DB		0x11
+#define GAIN_24DB		0x12
+#define GAIN_26DB		0x13
+#define GAIN_28DB		0x14
+#define GAIN_30DB		0x15
+#define GAIN_32DB		0x16
+#define GAIN_34DB		0x17
+#define GAIN_36DB		0x18
+#define GAIN_38DB		0x19
+#define GAIN_40DB		0x1A
+#define GAIN_42DB		0x1B
+#define GAIN_44DB		0x1C
+#define GAIN_46DB		0x1D
+#define GAIN_48DB		0x1E
+#define GAIN_50DB		0x1F
+#define INPUT_MUTE		0x80
+
+/******************************************************************************
+* 
+* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
+* with steps of 4dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_POTS_PLAY	0x0F00
+
+#define POTS_ATT_00DB		0x00
+#define POTS_ATT_04DB		0x01
+#define POTS_ATT_08DB		0x02
+#define POTS_ATT_12DB		0x03
+#define POTS_ATT_16DB		0x04
+#define POTS_ATT_20DB		0x05
+#define POTS_ATT_24DB		0x06
+#define POTS_ATT_28DB		0x07
+#define POTS_MUTE		0x80
+
+/******************************************************************************
+* 
+* The DAA controls the interface to the PSTN port.  The driver loads the
+* US coefficients by default, so if you live in a different country you
+* need to load the set for your countries phone system.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
+
+#define DAA_US 		1	/*PITA 8kHz */
+#define DAA_UK 		2	/*ISAR34 8kHz */
+#define DAA_FRANCE 	3	/* */
+#define DAA_GERMANY	4
+#define DAA_AUSTRALIA	5
+#define DAA_JAPAN	6
+
+/******************************************************************************
+* 
+* Use IXJCTL_PORT to set or query the port the card is set to.  If the
+* argument is set to PORT_QUERY, the return value of the ioctl will
+* indicate which port is currently in use, otherwise it will change the
+* port.
+* 
+******************************************************************************/
+#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
+
+#define PORT_QUERY	0
+#define PORT_POTS	1
+#define PORT_PSTN	2
+#define PORT_SPEAKER	3
+#define PORT_HANDSET	4
+
+#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
+#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
+
+#define PSTN_ON_HOOK	0
+#define PSTN_RINGING	1
+#define PSTN_OFF_HOOK	2
+#define PSTN_PULSE_DIAL	3
+
+/******************************************************************************
+* 
+* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
+* and the transmit gain (AGX).  OR together the components and pass them
+* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
+
+#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
+#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
+#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
+
+#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
+#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
+#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
+#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
+
+#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
+
+#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
+#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
+#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
+
+/******************************************************************************
+* 
+* This ioctl will connect the POTS port to the PSTN port on the LineJACK
+* In order for this to work properly the port selection should be set to
+* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
+* enable conference calls between PSTN callers and network callers.
+* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
+* passing a 0 turns it back off.
+* 
+******************************************************************************/
+#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
+
+/******************************************************************************
+*
+* IOCTLs added by request.
+*
+* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
+*           /usr/include/asm/param.h, this determines the fundamental
+*           frequency of the clock ticks on your Linux system.  The kernel
+*           must be rebuilt if you change this value, also all modules you
+*           use (except this one) must be recompiled.  The default value
+*           is 100, and you only need to use this IOCTL if you use some
+*           other value.
+*
+*
+* IXJCTL_RATE sets the number of times per second that the driver polls
+*             the DSP.  This value cannot be larger than HZ.  By
+*             increasing both of these values, you may be able to reduce
+*             latency because the max hang time that can exist between the
+*             driver and the DSP will be reduced.
+*
+******************************************************************************/
+
+#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
+#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
+#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
+#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
+#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
+#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
+#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
+#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
+#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
+
+/******************************************************************************
+*
+* This ioctl allows the user application to control what events the driver
+* will send signals for, and what signals it will send for which event.
+* By default, if signaling is enabled, all events will send SIGIO when
+* they occur.  To disable signals for an event set the signal to 0.
+*
+******************************************************************************/
+typedef enum {
+	SIG_DTMF_READY,
+	SIG_HOOKSTATE,
+	SIG_FLASH,
+	SIG_PSTN_RING,
+	SIG_CALLER_ID,
+	SIG_PSTN_WINK,
+	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
+	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
+	SIG_READ_READY = 33,
+	SIG_WRITE_READY = 34
+} IXJ_SIGEVENT;
+
+typedef struct {
+	unsigned int event;
+	int signal;
+} IXJ_SIGDEF;
+
+#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
+
+/******************************************************************************
+*
+* These ioctls allow the user application to change the gain in the 
+* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
+* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
+*
+* 11111 = +12 dB
+* 10111 =   0 dB
+* 00000 = -34.5 dB
+*
+* IXJCTL_SC_RXG sets the Receive gain
+* IXJCTL_SC_TXG sets the Transmit gain
+*
+******************************************************************************/
+#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
+#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
+
+/******************************************************************************
+*
+* The intercom IOCTL's short the output from one card to the input of the
+* other and vice versa (actually done in the DSP read function).  It is only
+* necessary to execute the IOCTL on one card, but it is necessary to have
+* both devices open to be able to detect hook switch changes.  The record
+* codec and rate of each card must match the playback codec and rate of
+* the other card for this to work properly.
+*
+******************************************************************************/
+
+#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
+#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
+
+/******************************************************************************
+ *
+ * new structure for accessing raw filter information
+ *
+ ******************************************************************************/
+
+typedef struct {
+	unsigned int filter;
+	char enable;
+	unsigned int coeff[19];
+} IXJ_FILTER_RAW;
+
+#endif
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
new file mode 100644
index 000000000000..593407e865b1
--- /dev/null
+++ b/include/linux/jbd.h
@@ -0,0 +1,1098 @@
+/*
+ * linux/include/linux/jbd.h
+ * 
+ * Written by Stephen C. Tweedie <sct@redhat.com>
+ *
+ * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * Definitions for transaction data structures for the buffer cache
+ * filesystem journaling support.
+ */
+
+#ifndef _LINUX_JBD_H
+#define _LINUX_JBD_H
+
+#if defined(CONFIG_JBD) || defined(CONFIG_JBD_MODULE) || !defined(__KERNEL__)
+
+/* Allow this file to be included directly into e2fsprogs */
+#ifndef __KERNEL__
+#include "jfs_compat.h"
+#define JFS_DEBUG
+#define jfs_debug jbd_debug
+#else
+
+#include <linux/buffer_head.h>
+#include <linux/journal-head.h>
+#include <linux/stddef.h>
+#include <asm/semaphore.h>
+#endif
+
+#define journal_oom_retry 1
+
+/*
+ * Define JBD_PARANIOD_IOFAIL to cause a kernel BUG() if ext3 finds
+ * certain classes of error which can occur due to failed IOs.  Under
+ * normal use we want ext3 to continue after such errors, because
+ * hardware _can_ fail, but for debugging purposes when running tests on
+ * known-good hardware we may want to trap these errors.
+ */
+#undef JBD_PARANOID_IOFAIL
+
+/*
+ * The default maximum commit age, in seconds.
+ */
+#define JBD_DEFAULT_MAX_COMMIT_AGE 5
+
+#ifdef CONFIG_JBD_DEBUG
+/*
+ * Define JBD_EXPENSIVE_CHECKING to enable more expensive internal
+ * consistency checks.  By default we don't do this unless
+ * CONFIG_JBD_DEBUG is on.
+ */
+#define JBD_EXPENSIVE_CHECKING
+extern int journal_enable_debug;
+
+#define jbd_debug(n, f, a...)						\
+	do {								\
+		if ((n) <= journal_enable_debug) {			\
+			printk (KERN_DEBUG "(%s, %d): %s: ",		\
+				__FILE__, __LINE__, __FUNCTION__);	\
+		  	printk (f, ## a);				\
+		}							\
+	} while (0)
+#else
+#define jbd_debug(f, a...)	/**/
+#endif
+
+extern void * __jbd_kmalloc (const char *where, size_t size, int flags, int retry);
+#define jbd_kmalloc(size, flags) \
+	__jbd_kmalloc(__FUNCTION__, (size), (flags), journal_oom_retry)
+#define jbd_rep_kmalloc(size, flags) \
+	__jbd_kmalloc(__FUNCTION__, (size), (flags), 1)
+
+#define JFS_MIN_JOURNAL_BLOCKS 1024
+
+#ifdef __KERNEL__
+
+/**
+ * typedef handle_t - The handle_t type represents a single atomic update being performed by some process.
+ *
+ * All filesystem modifications made by the process go
+ * through this handle.  Recursive operations (such as quota operations)
+ * are gathered into a single update.
+ *
+ * The buffer credits field is used to account for journaled buffers
+ * being modified by the running process.  To ensure that there is
+ * enough log space for all outstanding operations, we need to limit the
+ * number of outstanding buffers possible at any time.  When the
+ * operation completes, any buffer credits not used are credited back to
+ * the transaction, so that at all times we know how many buffers the
+ * outstanding updates on a transaction might possibly touch. 
+ * 
+ * This is an opaque datatype.
+ **/
+typedef struct handle_s		handle_t;	/* Atomic operation type */
+
+
+/**
+ * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
+ *
+ * journal_t is linked to from the fs superblock structure.
+ * 
+ * We use the journal_t to keep track of all outstanding transaction
+ * activity on the filesystem, and to manage the state of the log
+ * writing process.
+ *
+ * This is an opaque datatype.
+ **/
+typedef struct journal_s	journal_t;	/* Journal control structure */
+#endif
+
+/*
+ * Internal structures used by the logging mechanism:
+ */
+
+#define JFS_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */
+
+/*
+ * On-disk structures
+ */
+
+/* 
+ * Descriptor block types:
+ */
+
+#define JFS_DESCRIPTOR_BLOCK	1
+#define JFS_COMMIT_BLOCK	2
+#define JFS_SUPERBLOCK_V1	3
+#define JFS_SUPERBLOCK_V2	4
+#define JFS_REVOKE_BLOCK	5
+
+/*
+ * Standard header for all descriptor blocks:
+ */
+typedef struct journal_header_s
+{
+	__be32		h_magic;
+	__be32		h_blocktype;
+	__be32		h_sequence;
+} journal_header_t;
+
+
+/* 
+ * The block tag: used to describe a single buffer in the journal 
+ */
+typedef struct journal_block_tag_s
+{
+	__be32		t_blocknr;	/* The on-disk block number */
+	__be32		t_flags;	/* See below */
+} journal_block_tag_t;
+
+/* 
+ * The revoke descriptor: used on disk to describe a series of blocks to
+ * be revoked from the log 
+ */
+typedef struct journal_revoke_header_s
+{
+	journal_header_t r_header;
+	__be32		 r_count;	/* Count of bytes used in the block */
+} journal_revoke_header_t;
+
+
+/* Definitions for the journal tag flags word: */
+#define JFS_FLAG_ESCAPE		1	/* on-disk block is escaped */
+#define JFS_FLAG_SAME_UUID	2	/* block has same uuid as previous */
+#define JFS_FLAG_DELETED	4	/* block deleted by this transaction */
+#define JFS_FLAG_LAST_TAG	8	/* last tag in this descriptor block */
+
+
+/*
+ * The journal superblock.  All fields are in big-endian byte order.
+ */
+typedef struct journal_superblock_s
+{
+/* 0x0000 */
+	journal_header_t s_header;
+
+/* 0x000C */
+	/* Static information describing the journal */
+	__be32	s_blocksize;		/* journal device blocksize */
+	__be32	s_maxlen;		/* total blocks in journal file */
+	__be32	s_first;		/* first block of log information */
+
+/* 0x0018 */
+	/* Dynamic information describing the current state of the log */
+	__be32	s_sequence;		/* first commit ID expected in log */
+	__be32	s_start;		/* blocknr of start of log */
+
+/* 0x0020 */
+	/* Error value, as set by journal_abort(). */
+	__be32	s_errno;
+
+/* 0x0024 */
+	/* Remaining fields are only valid in a version-2 superblock */
+	__be32	s_feature_compat; 	/* compatible feature set */
+	__be32	s_feature_incompat; 	/* incompatible feature set */
+	__be32	s_feature_ro_compat; 	/* readonly-compatible feature set */
+/* 0x0030 */
+	__u8	s_uuid[16];		/* 128-bit uuid for journal */
+
+/* 0x0040 */
+	__be32	s_nr_users;		/* Nr of filesystems sharing log */
+
+	__be32	s_dynsuper;		/* Blocknr of dynamic superblock copy*/
+
+/* 0x0048 */
+	__be32	s_max_transaction;	/* Limit of journal blocks per trans.*/
+	__be32	s_max_trans_data;	/* Limit of data blocks per trans. */
+
+/* 0x0050 */
+	__u32	s_padding[44];
+
+/* 0x0100 */
+	__u8	s_users[16*48];		/* ids of all fs'es sharing the log */
+/* 0x0400 */
+} journal_superblock_t;
+
+#define JFS_HAS_COMPAT_FEATURE(j,mask)					\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
+#define JFS_HAS_RO_COMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask))))
+#define JFS_HAS_INCOMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
+
+#define JFS_FEATURE_INCOMPAT_REVOKE	0x00000001
+
+/* Features known to this kernel version: */
+#define JFS_KNOWN_COMPAT_FEATURES	0
+#define JFS_KNOWN_ROCOMPAT_FEATURES	0
+#define JFS_KNOWN_INCOMPAT_FEATURES	JFS_FEATURE_INCOMPAT_REVOKE
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <asm/bug.h>
+
+#define JBD_ASSERTIONS
+#ifdef JBD_ASSERTIONS
+#define J_ASSERT(assert)						\
+do {									\
+	if (!(assert)) {						\
+		printk (KERN_EMERG					\
+			"Assertion failure in %s() at %s:%d: \"%s\"\n",	\
+			__FUNCTION__, __FILE__, __LINE__, # assert);	\
+		BUG();							\
+	}								\
+} while (0)
+
+#if defined(CONFIG_BUFFER_DEBUG)
+void buffer_assertion_failure(struct buffer_head *bh);
+#define J_ASSERT_BH(bh, expr)						\
+	do {								\
+		if (!(expr))						\
+			buffer_assertion_failure(bh);			\
+		J_ASSERT(expr);						\
+	} while (0)
+#define J_ASSERT_JH(jh, expr)	J_ASSERT_BH(jh2bh(jh), expr)
+#else
+#define J_ASSERT_BH(bh, expr)	J_ASSERT(expr)
+#define J_ASSERT_JH(jh, expr)	J_ASSERT(expr)
+#endif
+
+#else
+#define J_ASSERT(assert)	do { } while (0)
+#endif		/* JBD_ASSERTIONS */
+
+#if defined(JBD_PARANOID_IOFAIL)
+#define J_EXPECT(expr, why...)		J_ASSERT(expr)
+#define J_EXPECT_BH(bh, expr, why...)	J_ASSERT_BH(bh, expr)
+#define J_EXPECT_JH(jh, expr, why...)	J_ASSERT_JH(jh, expr)
+#else
+#define __journal_expect(expr, why...)					     \
+	({								     \
+		int val = (expr);					     \
+		if (!val) {						     \
+			printk(KERN_ERR					     \
+				"EXT3-fs unexpected failure: %s;\n",# expr); \
+			printk(KERN_ERR why "\n");			     \
+		}							     \
+		val;							     \
+	})
+#define J_EXPECT(expr, why...)		__journal_expect(expr, ## why)
+#define J_EXPECT_BH(bh, expr, why...)	__journal_expect(expr, ## why)
+#define J_EXPECT_JH(jh, expr, why...)	__journal_expect(expr, ## why)
+#endif
+
+enum jbd_state_bits {
+	BH_JBD			/* Has an attached ext3 journal_head */
+	  = BH_PrivateStart,
+	BH_JWrite,		/* Being written to log (@@@ DEBUGGING) */
+	BH_Freed,		/* Has been freed (truncated) */
+	BH_Revoked,		/* Has been revoked from the log */
+	BH_RevokeValid,		/* Revoked flag is valid */
+	BH_JBDDirty,		/* Is dirty but journaled */
+	BH_State,		/* Pins most journal_head state */
+	BH_JournalHead,		/* Pins bh->b_private and jh->b_bh */
+	BH_Unshadow,		/* Dummy bit, for BJ_Shadow wakeup filtering */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+
+static inline struct buffer_head *jh2bh(struct journal_head *jh)
+{
+	return jh->b_bh;
+}
+
+static inline struct journal_head *bh2jh(struct buffer_head *bh)
+{
+	return bh->b_private;
+}
+
+static inline void jbd_lock_bh_state(struct buffer_head *bh)
+{
+	bit_spin_lock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_trylock_bh_state(struct buffer_head *bh)
+{
+	return bit_spin_trylock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
+{
+	return bit_spin_is_locked(BH_State, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_state(struct buffer_head *bh)
+{
+	bit_spin_unlock(BH_State, &bh->b_state);
+}
+
+static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
+{
+	bit_spin_lock(BH_JournalHead, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
+{
+	bit_spin_unlock(BH_JournalHead, &bh->b_state);
+}
+
+struct jbd_revoke_table_s;
+
+/**
+ * struct handle_s - The handle_s type is the concrete type associated with
+ *     handle_t.
+ * @h_transaction: Which compound transaction is this update a part of?
+ * @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
+ * @h_ref: Reference count on this handle
+ * @h_err: Field for caller's use to track errors through large fs operations
+ * @h_sync: flag for sync-on-close
+ * @h_jdata: flag to force data journaling
+ * @h_aborted: flag indicating fatal error on handle
+ **/
+
+/* Docbook can't yet cope with the bit fields, but will leave the documentation
+ * in so it can be fixed later. 
+ */
+
+struct handle_s 
+{
+	/* Which compound transaction is this update a part of? */
+	transaction_t		*h_transaction;
+
+	/* Number of remaining buffers we are allowed to dirty: */
+	int			h_buffer_credits;
+
+	/* Reference count on this handle */
+	int			h_ref;
+
+	/* Field for caller's use to track errors through large fs */
+	/* operations */
+	int			h_err;
+
+	/* Flags [no locking] */
+	unsigned int	h_sync:		1;	/* sync-on-close */
+	unsigned int	h_jdata:	1;	/* force data journaling */
+	unsigned int	h_aborted:	1;	/* fatal error on handle */
+};
+
+
+/* The transaction_t type is the guts of the journaling mechanism.  It
+ * tracks a compound transaction through its various states:
+ *
+ * RUNNING:	accepting new updates
+ * LOCKED:	Updates still running but we don't accept new ones
+ * RUNDOWN:	Updates are tidying up but have finished requesting
+ *		new buffers to modify (state not used for now)
+ * FLUSH:       All updates complete, but we are still writing to disk
+ * COMMIT:      All data on disk, writing commit record
+ * FINISHED:	We still have to keep the transaction for checkpointing.
+ *
+ * The transaction keeps track of all of the buffers modified by a
+ * running transaction, and all of the buffers committed but not yet
+ * flushed to home for finished transactions.
+ */
+
+/*
+ * Lock ranking:
+ *
+ *    j_list_lock
+ *      ->jbd_lock_bh_journal_head()	(This is "innermost")
+ *
+ *    j_state_lock
+ *    ->jbd_lock_bh_state()
+ *
+ *    jbd_lock_bh_state()
+ *    ->j_list_lock
+ *
+ *    j_state_lock
+ *    ->t_handle_lock
+ *
+ *    j_state_lock
+ *    ->j_list_lock			(journal_unmap_buffer)
+ *
+ */
+
+struct transaction_s 
+{
+	/* Pointer to the journal for this transaction. [no locking] */
+	journal_t		*t_journal;
+
+	/* Sequence number for this transaction [no locking] */
+	tid_t			t_tid;
+
+	/*
+	 * Transaction's current state
+	 * [no locking - only kjournald alters this]
+	 * FIXME: needs barriers
+	 * KLUDGE: [use j_state_lock]
+	 */
+	enum {
+		T_RUNNING,
+		T_LOCKED,
+		T_RUNDOWN,
+		T_FLUSH,
+		T_COMMIT,
+		T_FINISHED 
+	}			t_state;
+
+	/*
+	 * Where in the log does this transaction's commit start? [no locking]
+	 */
+	unsigned long		t_log_start;
+
+	/* Number of buffers on the t_buffers list [j_list_lock] */
+	int			t_nr_buffers;
+
+	/*
+	 * Doubly-linked circular list of all buffers reserved but not yet
+	 * modified by this transaction [j_list_lock]
+	 */
+	struct journal_head	*t_reserved_list;
+
+	/*
+	 * Doubly-linked circular list of all buffers under writeout during
+	 * commit [j_list_lock]
+	 */
+	struct journal_head	*t_locked_list;
+
+	/*
+	 * Doubly-linked circular list of all metadata buffers owned by this
+	 * transaction [j_list_lock]
+	 */
+	struct journal_head	*t_buffers;
+
+	/*
+	 * Doubly-linked circular list of all data buffers still to be
+	 * flushed before this transaction can be committed [j_list_lock]
+	 */
+	struct journal_head	*t_sync_datalist;
+
+	/*
+	 * Doubly-linked circular list of all forget buffers (superseded
+	 * buffers which we can un-checkpoint once this transaction commits)
+	 * [j_list_lock]
+	 */
+	struct journal_head	*t_forget;
+
+	/*
+	 * Doubly-linked circular list of all buffers still to be flushed before
+	 * this transaction can be checkpointed. [j_list_lock]
+	 */
+	struct journal_head	*t_checkpoint_list;
+
+	/*
+	 * Doubly-linked circular list of temporary buffers currently undergoing
+	 * IO in the log [j_list_lock]
+	 */
+	struct journal_head	*t_iobuf_list;
+
+	/*
+	 * Doubly-linked circular list of metadata buffers being shadowed by log
+	 * IO.  The IO buffers on the iobuf list and the shadow buffers on this
+	 * list match each other one for one at all times. [j_list_lock]
+	 */
+	struct journal_head	*t_shadow_list;
+
+	/*
+	 * Doubly-linked circular list of control buffers being written to the
+	 * log. [j_list_lock]
+	 */
+	struct journal_head	*t_log_list;
+
+	/*
+	 * Protects info related to handles
+	 */
+	spinlock_t		t_handle_lock;
+
+	/*
+	 * Number of outstanding updates running on this transaction
+	 * [t_handle_lock]
+	 */
+	int			t_updates;
+
+	/*
+	 * Number of buffers reserved for use by all handles in this transaction
+	 * handle but not yet modified. [t_handle_lock]
+	 */
+	int			t_outstanding_credits;
+
+	/*
+	 * Forward and backward links for the circular list of all transactions
+	 * awaiting checkpoint. [j_list_lock]
+	 */
+	transaction_t		*t_cpnext, *t_cpprev;
+
+	/*
+	 * When will the transaction expire (become due for commit), in jiffies?
+	 * [no locking]
+	 */
+	unsigned long		t_expires;
+
+	/*
+	 * How many handles used this transaction? [t_handle_lock]
+	 */
+	int t_handle_count;
+
+};
+
+/**
+ * struct journal_s - The journal_s type is the concrete type associated with
+ *     journal_t.
+ * @j_flags:  General journaling state flags
+ * @j_errno:  Is there an outstanding uncleared error on the journal (from a
+ *     prior abort)? 
+ * @j_sb_buffer: First part of superblock buffer
+ * @j_superblock: Second part of superblock buffer
+ * @j_format_version: Version of the superblock format
+ * @j_state_lock: Protect the various scalars in the journal
+ * @j_barrier_count:  Number of processes waiting to create a barrier lock
+ * @j_barrier: The barrier lock itself
+ * @j_running_transaction: The current running transaction..
+ * @j_committing_transaction: the transaction we are pushing to disk
+ * @j_checkpoint_transactions: a linked circular list of all transactions
+ *  waiting for checkpointing
+ * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
+ *  to start committing, or for a barrier lock to be released
+ * @j_wait_logspace: Wait queue for waiting for checkpointing to complete
+ * @j_wait_done_commit: Wait queue for waiting for commit to complete 
+ * @j_wait_checkpoint:  Wait queue to trigger checkpointing
+ * @j_wait_commit: Wait queue to trigger commit
+ * @j_wait_updates: Wait queue to wait for updates to complete
+ * @j_checkpoint_sem: Semaphore for locking against concurrent checkpoints
+ * @j_head: Journal head - identifies the first unused block in the journal
+ * @j_tail: Journal tail - identifies the oldest still-used block in the
+ *  journal.
+ * @j_free: Journal free - how many free blocks are there in the journal?
+ * @j_first: The block number of the first usable block 
+ * @j_last: The block number one beyond the last usable block
+ * @j_dev: Device where we store the journal
+ * @j_blocksize: blocksize for the location where we store the journal.
+ * @j_blk_offset: starting block offset for into the device where we store the
+ *     journal
+ * @j_fs_dev: Device which holds the client fs.  For internal journal this will
+ *     be equal to j_dev
+ * @j_maxlen: Total maximum capacity of the journal region on disk.
+ * @j_list_lock: Protects the buffer lists and internal buffer state.
+ * @j_inode: Optional inode where we store the journal.  If present, all journal
+ *     block numbers are mapped into this inode via bmap().
+ * @j_tail_sequence:  Sequence number of the oldest transaction in the log 
+ * @j_transaction_sequence: Sequence number of the next transaction to grant
+ * @j_commit_sequence: Sequence number of the most recently committed
+ *  transaction
+ * @j_commit_request: Sequence number of the most recent transaction wanting
+ *     commit 
+ * @j_uuid: Uuid of client object.
+ * @j_task: Pointer to the current commit thread for this journal
+ * @j_max_transaction_buffers:  Maximum number of metadata buffers to allow in a
+ *     single compound commit transaction
+ * @j_commit_interval: What is the maximum transaction lifetime before we begin
+ *  a commit?
+ * @j_commit_timer:  The timer used to wakeup the commit thread
+ * @j_revoke_lock: Protect the revoke table
+ * @j_revoke: The revoke table - maintains the list of revoked blocks in the
+ *     current transaction.
+ * @j_revoke_table: alternate revoke tables for j_revoke
+ * @j_private: An opaque pointer to fs-private information.
+ */
+
+struct journal_s
+{
+	/* General journaling state flags [j_state_lock] */
+	unsigned long		j_flags;
+
+	/*
+	 * Is there an outstanding uncleared error on the journal (from a prior
+	 * abort)? [j_state_lock]
+	 */
+	int			j_errno;
+
+	/* The superblock buffer */
+	struct buffer_head	*j_sb_buffer;
+	journal_superblock_t	*j_superblock;
+
+	/* Version of the superblock format */
+	int			j_format_version;
+
+	/*
+	 * Protect the various scalars in the journal
+	 */
+	spinlock_t		j_state_lock;
+
+	/*
+	 * Number of processes waiting to create a barrier lock [j_state_lock]
+	 */
+	int			j_barrier_count;
+
+	/* The barrier lock itself */
+	struct semaphore	j_barrier;
+
+	/*
+	 * Transactions: The current running transaction...
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_running_transaction;
+
+	/*
+	 * the transaction we are pushing to disk
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_committing_transaction;
+
+	/*
+	 * ... and a linked circular list of all transactions waiting for
+	 * checkpointing. [j_list_lock]
+	 */
+	transaction_t		*j_checkpoint_transactions;
+
+	/*
+	 * Wait queue for waiting for a locked transaction to start committing,
+	 * or for a barrier lock to be released
+	 */
+	wait_queue_head_t	j_wait_transaction_locked;
+
+	/* Wait queue for waiting for checkpointing to complete */
+	wait_queue_head_t	j_wait_logspace;
+
+	/* Wait queue for waiting for commit to complete */
+	wait_queue_head_t	j_wait_done_commit;
+
+	/* Wait queue to trigger checkpointing */
+	wait_queue_head_t	j_wait_checkpoint;
+
+	/* Wait queue to trigger commit */
+	wait_queue_head_t	j_wait_commit;
+
+	/* Wait queue to wait for updates to complete */
+	wait_queue_head_t	j_wait_updates;
+
+	/* Semaphore for locking against concurrent checkpoints */
+	struct semaphore 	j_checkpoint_sem;
+
+	/*
+	 * Journal head: identifies the first unused block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned long		j_head;
+
+	/*
+	 * Journal tail: identifies the oldest still-used block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned long		j_tail;
+
+	/*
+	 * Journal free: how many free blocks are there in the journal?
+	 * [j_state_lock]
+	 */
+	unsigned long		j_free;
+
+	/*
+	 * Journal start and end: the block numbers of the first usable block
+	 * and one beyond the last usable block in the journal. [j_state_lock]
+	 */
+	unsigned long		j_first;
+	unsigned long		j_last;
+
+	/*
+	 * Device, blocksize and starting block offset for the location where we
+	 * store the journal.
+	 */
+	struct block_device	*j_dev;
+	int			j_blocksize;
+	unsigned int		j_blk_offset;
+
+	/*
+	 * Device which holds the client fs.  For internal journal this will be
+	 * equal to j_dev.
+	 */
+	struct block_device	*j_fs_dev;
+
+	/* Total maximum capacity of the journal region on disk. */
+	unsigned int		j_maxlen;
+
+	/*
+	 * Protects the buffer lists and internal buffer state.
+	 */
+	spinlock_t		j_list_lock;
+
+	/* Optional inode where we store the journal.  If present, all */
+	/* journal block numbers are mapped into this inode via */
+	/* bmap(). */
+	struct inode		*j_inode;
+
+	/*
+	 * Sequence number of the oldest transaction in the log [j_state_lock]
+	 */
+	tid_t			j_tail_sequence;
+
+	/*
+	 * Sequence number of the next transaction to grant [j_state_lock]
+	 */
+	tid_t			j_transaction_sequence;
+
+	/*
+	 * Sequence number of the most recently committed transaction
+	 * [j_state_lock].
+	 */
+	tid_t			j_commit_sequence;
+
+	/*
+	 * Sequence number of the most recent transaction wanting commit
+	 * [j_state_lock]
+	 */
+	tid_t			j_commit_request;
+
+	/*
+	 * Journal uuid: identifies the object (filesystem, LVM volume etc)
+	 * backed by this journal.  This will eventually be replaced by an array
+	 * of uuids, allowing us to index multiple devices within a single
+	 * journal and to perform atomic updates across them.
+	 */
+	__u8			j_uuid[16];
+
+	/* Pointer to the current commit thread for this journal */
+	struct task_struct	*j_task;
+
+	/*
+	 * Maximum number of metadata buffers to allow in a single compound
+	 * commit transaction
+	 */
+	int			j_max_transaction_buffers;
+
+	/*
+	 * What is the maximum transaction lifetime before we begin a commit?
+	 */
+	unsigned long		j_commit_interval;
+
+	/* The timer used to wakeup the commit thread: */
+	struct timer_list	*j_commit_timer;
+
+	/*
+	 * The revoke table: maintains the list of revoked blocks in the
+	 * current transaction.  [j_revoke_lock]
+	 */
+	spinlock_t		j_revoke_lock;
+	struct jbd_revoke_table_s *j_revoke;
+	struct jbd_revoke_table_s *j_revoke_table[2];
+
+	/*
+	 * array of bhs for journal_commit_transaction
+	 */
+	struct buffer_head	**j_wbuf;
+	int			j_wbufsize;
+
+	/*
+	 * An opaque pointer to fs-private information.  ext3 puts its
+	 * superblock pointer here
+	 */
+	void *j_private;
+};
+
+/* 
+ * Journal flag definitions 
+ */
+#define JFS_UNMOUNT	0x001	/* Journal thread is being destroyed */
+#define JFS_ABORT	0x002	/* Journaling has been aborted for errors. */
+#define JFS_ACK_ERR	0x004	/* The errno in the sb has been acked */
+#define JFS_FLUSHED	0x008	/* The journal superblock has been flushed */
+#define JFS_LOADED	0x010	/* The journal superblock has been loaded */
+#define JFS_BARRIER	0x020	/* Use IDE barriers */
+
+/* 
+ * Function declarations for the journaling transaction and buffer
+ * management
+ */
+
+/* Filing buffers */
+extern void __journal_temp_unlink_buffer(struct journal_head *jh);
+extern void journal_unfile_buffer(journal_t *, struct journal_head *);
+extern void __journal_unfile_buffer(struct journal_head *);
+extern void __journal_refile_buffer(struct journal_head *);
+extern void journal_refile_buffer(journal_t *, struct journal_head *);
+extern void __journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_free_buffer(struct journal_head *bh);
+extern void journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_clean_data_list(transaction_t *transaction);
+
+/* Log buffer allocation */
+extern struct journal_head * journal_get_descriptor_buffer(journal_t *);
+int journal_next_log_block(journal_t *, unsigned long *);
+
+/* Commit management */
+extern void journal_commit_transaction(journal_t *);
+
+/* Checkpoint list management */
+int __journal_clean_checkpoint_list(journal_t *journal);
+void __journal_remove_checkpoint(struct journal_head *);
+void __journal_insert_checkpoint(struct journal_head *, transaction_t *);
+
+/* Buffer IO */
+extern int 
+journal_write_metadata_buffer(transaction_t	  *transaction,
+			      struct journal_head  *jh_in,
+			      struct journal_head **jh_out,
+			      int		   blocknr);
+
+/* Transaction locking */
+extern void		__wait_on_journal (journal_t *);
+
+/*
+ * Journal locking.
+ *
+ * We need to lock the journal during transaction state changes so that nobody
+ * ever tries to take a handle on the running transaction while we are in the
+ * middle of moving it to the commit phase.  j_state_lock does this.
+ *
+ * Note that the locking is completely interrupt unsafe.  We never touch
+ * journal structures from interrupts.
+ */
+
+static inline handle_t *journal_current_handle(void)
+{
+	return current->journal_info;
+}
+
+/* The journaling code user interface:
+ *
+ * Create and destroy handles
+ * Register buffer modifications against the current transaction. 
+ */
+
+extern handle_t *journal_start(journal_t *, int nblocks);
+extern int	 journal_restart (handle_t *, int nblocks);
+extern int	 journal_extend (handle_t *, int nblocks);
+extern int	 journal_get_write_access(handle_t *, struct buffer_head *);
+extern int	 journal_get_create_access (handle_t *, struct buffer_head *);
+extern int	 journal_get_undo_access(handle_t *, struct buffer_head *);
+extern int	 journal_dirty_data (handle_t *, struct buffer_head *);
+extern int	 journal_dirty_metadata (handle_t *, struct buffer_head *);
+extern void	 journal_release_buffer (handle_t *, struct buffer_head *);
+extern int	 journal_forget (handle_t *, struct buffer_head *);
+extern void	 journal_sync_buffer (struct buffer_head *);
+extern int	 journal_invalidatepage(journal_t *,
+				struct page *, unsigned long);
+extern int	 journal_try_to_free_buffers(journal_t *, struct page *, int);
+extern int	 journal_stop(handle_t *);
+extern int	 journal_flush (journal_t *);
+extern void	 journal_lock_updates (journal_t *);
+extern void	 journal_unlock_updates (journal_t *);
+
+extern journal_t * journal_init_dev(struct block_device *bdev,
+				struct block_device *fs_dev,
+				int start, int len, int bsize);
+extern journal_t * journal_init_inode (struct inode *);
+extern int	   journal_update_format (journal_t *);
+extern int	   journal_check_used_features 
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_check_available_features 
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_set_features 
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_create     (journal_t *);
+extern int	   journal_load       (journal_t *journal);
+extern void	   journal_destroy    (journal_t *);
+extern int	   journal_recover    (journal_t *journal);
+extern int	   journal_wipe       (journal_t *, int);
+extern int	   journal_skip_recovery	(journal_t *);
+extern void	   journal_update_superblock	(journal_t *, int);
+extern void	   __journal_abort_hard	(journal_t *);
+extern void	   __journal_abort_soft	(journal_t *, int);
+extern void	   journal_abort      (journal_t *, int);
+extern int	   journal_errno      (journal_t *);
+extern void	   journal_ack_err    (journal_t *);
+extern int	   journal_clear_err  (journal_t *);
+extern int	   journal_bmap(journal_t *, unsigned long, unsigned long *);
+extern int	   journal_force_commit(journal_t *);
+
+/*
+ * journal_head management
+ */
+struct journal_head *journal_add_journal_head(struct buffer_head *bh);
+struct journal_head *journal_grab_journal_head(struct buffer_head *bh);
+void journal_remove_journal_head(struct buffer_head *bh);
+void journal_put_journal_head(struct journal_head *jh);
+
+/*
+ * handle management
+ */
+extern kmem_cache_t *jbd_handle_cache;
+
+static inline handle_t *jbd_alloc_handle(unsigned int __nocast gfp_flags)
+{
+	return kmem_cache_alloc(jbd_handle_cache, gfp_flags);
+}
+
+static inline void jbd_free_handle(handle_t *handle)
+{
+	kmem_cache_free(jbd_handle_cache, handle);
+}
+
+/* Primary revoke support */
+#define JOURNAL_REVOKE_DEFAULT_HASH 256
+extern int	   journal_init_revoke(journal_t *, int);
+extern void	   journal_destroy_revoke_caches(void);
+extern int	   journal_init_revoke_caches(void);
+
+extern void	   journal_destroy_revoke(journal_t *);
+extern int	   journal_revoke (handle_t *,
+				unsigned long, struct buffer_head *);
+extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
+extern void	   journal_write_revoke_records(journal_t *, transaction_t *);
+
+/* Recovery revoke support */
+extern int	journal_set_revoke(journal_t *, unsigned long, tid_t);
+extern int	journal_test_revoke(journal_t *, unsigned long, tid_t);
+extern void	journal_clear_revoke(journal_t *);
+extern void	journal_brelse_array(struct buffer_head *b[], int n);
+extern void	journal_switch_revoke_table(journal_t *journal);
+
+/*
+ * The log thread user interface:
+ *
+ * Request space in the current transaction, and force transaction commit
+ * transitions on demand.
+ */
+
+int __log_space_left(journal_t *); /* Called with journal locked */
+int log_start_commit(journal_t *journal, tid_t tid);
+int __log_start_commit(journal_t *journal, tid_t tid);
+int journal_start_commit(journal_t *journal, tid_t *tid);
+int journal_force_commit_nested(journal_t *journal);
+int log_wait_commit(journal_t *journal, tid_t tid);
+int log_do_checkpoint(journal_t *journal);
+
+void __log_wait_for_space(journal_t *journal);
+extern void	__journal_drop_transaction(journal_t *, transaction_t *);
+extern int	cleanup_journal_tail(journal_t *);
+
+/* Debugging code only: */
+
+#define jbd_ENOSYS() \
+do {								           \
+	printk (KERN_ERR "JBD unimplemented function %s\n", __FUNCTION__); \
+	current->state = TASK_UNINTERRUPTIBLE;			           \
+	schedule();						           \
+} while (1)
+
+/*
+ * is_journal_abort
+ *
+ * Simple test wrapper function to test the JFS_ABORT state flag.  This
+ * bit, when set, indicates that we have had a fatal error somewhere,
+ * either inside the journaling layer or indicated to us by the client
+ * (eg. ext3), and that we and should not commit any further
+ * transactions.  
+ */
+
+static inline int is_journal_aborted(journal_t *journal)
+{
+	return journal->j_flags & JFS_ABORT;
+}
+
+static inline int is_handle_aborted(handle_t *handle)
+{
+	if (handle->h_aborted)
+		return 1;
+	return is_journal_aborted(handle->h_transaction->t_journal);
+}
+
+static inline void journal_abort_handle(handle_t *handle)
+{
+	handle->h_aborted = 1;
+}
+
+#endif /* __KERNEL__   */
+
+/* Comparison functions for transaction IDs: perform comparisons using
+ * modulo arithmetic so that they work over sequence number wraps. */
+
+static inline int tid_gt(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference > 0);
+}
+
+static inline int tid_geq(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference >= 0);
+}
+
+extern int journal_blocks_per_page(struct inode *inode);
+
+/*
+ * Return the minimum number of blocks which must be free in the journal
+ * before a new transaction may be started.  Must be called under j_state_lock.
+ */
+static inline int jbd_space_needed(journal_t *journal)
+{
+	int nblocks = journal->j_max_transaction_buffers;
+	if (journal->j_committing_transaction)
+		nblocks += journal->j_committing_transaction->
+					t_outstanding_credits;
+	return nblocks;
+}
+
+/*
+ * Definitions which augment the buffer_head layer
+ */
+
+/* journaling buffer types */
+#define BJ_None		0	/* Not journaled */
+#define BJ_SyncData	1	/* Normal data: flush before commit */
+#define BJ_Metadata	2	/* Normal journaled metadata */
+#define BJ_Forget	3	/* Buffer superseded by this transaction */
+#define BJ_IO		4	/* Buffer is for temporary IO use */
+#define BJ_Shadow	5	/* Buffer contents being shadowed to the log */
+#define BJ_LogCtl	6	/* Buffer contains log descriptors */
+#define BJ_Reserved	7	/* Buffer is reserved for access by journal */
+#define BJ_Locked	8	/* Locked for I/O during commit */
+#define BJ_Types	9
+ 
+extern int jbd_blocks_per_page(struct inode *inode);
+
+#ifdef __KERNEL__
+
+#define buffer_trace_init(bh)	do {} while (0)
+#define print_buffer_fields(bh)	do {} while (0)
+#define print_buffer_trace(bh)	do {} while (0)
+#define BUFFER_TRACE(bh, info)	do {} while (0)
+#define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
+#define JBUFFER_TRACE(jh, info)	do {} while (0)
+
+#endif	/* __KERNEL__ */
+
+#endif	/* CONFIG_JBD || CONFIG_JBD_MODULE || !__KERNEL__ */
+
+/*
+ * Compatibility no-ops which allow the kernel to compile without CONFIG_JBD
+ * go here.
+ */
+
+#if defined(__KERNEL__) && !(defined(CONFIG_JBD) || defined(CONFIG_JBD_MODULE))
+
+#define J_ASSERT(expr)			do {} while (0)
+#define J_ASSERT_BH(bh, expr)		do {} while (0)
+#define buffer_jbd(bh)			0
+#define journal_buffer_journal_lru(bh)	0
+
+#endif	/* defined(__KERNEL__) && !defined(CONFIG_JBD) */
+#endif	/* _LINUX_JBD_H */
diff --git a/include/linux/jffs.h b/include/linux/jffs.h
new file mode 100644
index 000000000000..92213215277f
--- /dev/null
+++ b/include/linux/jffs.h
@@ -0,0 +1,224 @@
+/*
+ * JFFS -- Journalling Flash File System, Linux implementation.
+ *
+ * Copyright (C) 1999, 2000  Axis Communications AB.
+ *
+ * Created by Finn Hakansson <finn@axis.com>.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * $Id: jffs.h,v 1.20 2001/09/18 21:33:37 dwmw2 Exp $
+ *
+ * Ported to Linux 2.3.x and MTD:
+ * Copyright (C) 2000  Alexander Larsson (alex@cendio.se), Cendio Systems AB
+ *
+ */
+
+#ifndef __LINUX_JFFS_H__
+#define __LINUX_JFFS_H__
+
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#define JFFS_VERSION_STRING "1.0"
+
+/* This is a magic number that is used as an identification number for
+   this file system.  It is written to the super_block structure.  */
+#define JFFS_MAGIC_SB_BITMASK 0x07c0  /* 1984 */
+
+/* This is a magic number that every on-flash raw inode begins with.  */
+#define JFFS_MAGIC_BITMASK 0x34383931 /* "1984" */
+
+/* These two bitmasks are the valid ones for the flash memories we have
+   for the moment.  */
+#define JFFS_EMPTY_BITMASK 0xffffffff
+#define JFFS_DIRTY_BITMASK 0x00000000
+
+/* This is the inode number of the root node.  */
+#define JFFS_MIN_INO 1
+
+/* How many slots in the file hash table should we have?  */
+#define JFFS_HASH_SIZE 40
+
+/* Don't use more than 254 bytes as the maximum allowed length of a file's
+   name due to errors that could occur during the scanning of the flash
+   memory. In fact, a name length of 255 or 0xff, could be the result of
+   an uncompleted write.  For instance, if a raw inode is written to the
+   flash memory and there is a power lossage just before the length of
+   the name is written, the length 255 would be interpreted as an illegal
+   value.  */
+#define JFFS_MAX_NAME_LEN 254
+
+/* Commands for ioctl().  */
+#define JFFS_IOCTL_MAGIC 't'
+#define JFFS_PRINT_HASH _IO(JFFS_IOCTL_MAGIC, 90)
+#define JFFS_PRINT_TREE _IO(JFFS_IOCTL_MAGIC, 91)
+#define JFFS_GET_STATUS _IO(JFFS_IOCTL_MAGIC, 92)
+
+/* XXX: This is something that we should try to get rid of in the future.  */
+#define JFFS_MODIFY_INODE 0x01
+#define JFFS_MODIFY_NAME  0x02
+#define JFFS_MODIFY_DATA  0x04
+#define JFFS_MODIFY_EXIST 0x08
+
+struct jffs_control;
+
+/* The JFFS raw inode structure: Used for storage on physical media.  */
+/* Perhaps the uid, gid, atime, mtime and ctime members should have
+   more space due to future changes in the Linux kernel. Anyhow, since
+   a user of this filesystem probably have to fix a large number of
+   other things, we have decided to not be forward compatible.  */
+struct jffs_raw_inode
+{
+	__u32 magic;      /* A constant magic number.  */
+	__u32 ino;        /* Inode number.  */
+	__u32 pino;       /* Parent's inode number.  */
+	__u32 version;    /* Version number.  */
+	__u32 mode;       /* The file's type or mode.  */
+	__u16 uid;        /* The file's owner.  */
+	__u16 gid;        /* The file's group.  */
+	__u32 atime;      /* Last access time.  */
+	__u32 mtime;      /* Last modification time.  */
+	__u32 ctime;      /* Creation time.  */
+	__u32 offset;     /* Where to begin to write.  */
+	__u32 dsize;      /* Size of the node's data.  */
+	__u32 rsize;      /* How much are going to be replaced?  */
+	__u8 nsize;       /* Name length.  */
+	__u8 nlink;       /* Number of links.  */
+	__u8 spare : 6;   /* For future use.  */
+	__u8 rename : 1;  /* Rename to a name of an already existing file?  */
+	__u8 deleted : 1; /* Has this file been deleted?  */
+	__u8 accurate;    /* The inode is obsolete if accurate == 0.  */
+	__u32 dchksum;    /* Checksum for the data.  */
+	__u16 nchksum;    /* Checksum for the name.  */
+	__u16 chksum;     /* Checksum for the raw inode.  */
+};
+
+/* Define the offset of the accurate byte in struct jffs_raw_inode.  */
+#define JFFS_RAW_INODE_ACCURATE_OFFSET (sizeof(struct jffs_raw_inode) \
+					- 2 * sizeof(__u32) - sizeof(__u8))
+
+/* Define the offset of the chksum member in struct jffs_raw_inode.  */
+#define JFFS_RAW_INODE_CHKSUM_OFFSET (sizeof(struct jffs_raw_inode) \
+				      - sizeof(__u16))
+
+/* Define the offset of the dchksum member in struct jffs_raw_inode.  */
+#define JFFS_RAW_INODE_DCHKSUM_OFFSET (sizeof(struct jffs_raw_inode)   \
+				       - sizeof(__u16) - sizeof(__u16) \
+				       - sizeof(__u32))
+
+
+/* The RAM representation of the node.  The names of pointers to
+   jffs_nodes are very often just called `n' in the source code.  */
+struct jffs_node
+{
+	__u32 ino;          /* Inode number.  */
+	__u32 version;      /* Version number.  */
+	__u32 data_offset;  /* Logic location of the data to insert.  */
+	__u32 data_size;    /* The amount of data this node inserts.  */
+	__u32 removed_size; /* The amount of data that this node removes.  */
+	__u32 fm_offset;    /* Physical location of the data in the actual
+			       flash memory data chunk.  */
+	__u8 name_size;     /* Size of the name.  */
+	struct jffs_fm *fm; /* Physical memory information.  */
+	struct jffs_node *version_prev;
+	struct jffs_node *version_next;
+	struct jffs_node *range_prev;
+	struct jffs_node *range_next;
+};
+
+
+/* The RAM representation of a file (plain files, directories,
+   links, etc.).  Pointers to jffs_files are normally named `f'
+   in the JFFS source code.  */
+struct jffs_file
+{
+	__u32 ino;    /* Inode number.  */
+	__u32 pino;   /* Parent's inode number.  */
+	__u32 mode;   /* file_type, mode  */
+	__u16 uid;    /* owner  */
+	__u16 gid;    /* group  */
+	__u32 atime;  /* Last access time.  */
+	__u32 mtime;  /* Last modification time.  */
+	__u32 ctime;  /* Creation time.  */
+	__u8 nsize;   /* Name length.  */
+	__u8 nlink;   /* Number of links.  */
+	__u8 deleted; /* Has this file been deleted?  */
+	char *name;   /* The name of this file; NULL-terminated.  */
+	__u32 size;   /* The total size of the file's data.  */
+	__u32 highest_version; /* The highest version number of this file.  */
+	struct jffs_control *c;
+	struct jffs_file *parent;   /* Reference to the parent directory.  */
+	struct jffs_file *children; /* Always NULL for plain files.  */
+	struct jffs_file *sibling_prev; /* Siblings in the same directory.  */
+	struct jffs_file *sibling_next;
+	struct list_head hash;    /* hash list.  */
+	struct jffs_node *range_head;   /* The final data.  */
+	struct jffs_node *range_tail;   /* The first data.  */
+	struct jffs_node *version_head; /* The youngest node.  */
+	struct jffs_node *version_tail; /* The oldest node.  */
+};
+
+
+/* This is just a definition of a simple list used for keeping track of
+   files deleted due to a rename.  This list is only used during the
+   mounting of the file system and only if there have been rename operations
+   earlier.  */
+struct jffs_delete_list
+{
+	__u32 ino;
+	struct jffs_delete_list *next;
+};
+
+
+/* A struct for the overall file system control.  Pointers to
+   jffs_control structs are named `c' in the source code.  */
+struct jffs_control
+{
+	struct super_block *sb;		/* Reference to the VFS super block.  */
+	struct jffs_file *root;		/* The root directory file.  */
+	struct list_head *hash;		/* Hash table for finding files by ino.  */
+	struct jffs_fmcontrol *fmc;	/* Flash memory control structure.  */
+	__u32 hash_len;			/* The size of the hash table.  */
+	__u32 next_ino;			/* Next inode number to use for new files.  */
+	__u16 building_fs;		/* Is the file system being built right now?  */
+	struct jffs_delete_list *delete_list; /* Track deleted files.  */
+	pid_t thread_pid;		/* GC thread's PID */
+	struct task_struct *gc_task;	/* GC task struct */
+	struct completion gc_thread_comp; /* GC thread exit mutex */
+	__u32 gc_minfree_threshold;	/* GC trigger thresholds */
+	__u32 gc_maxdirty_threshold;
+};
+
+
+/* Used to inform about flash status.  */
+struct jffs_flash_status
+{
+	__u32 size;
+	__u32 used;
+	__u32 dirty;
+	__u32 begin;
+	__u32 end;
+};
+
+/* This stuff could be used for finding memory leaks.  */
+#define JFFS_MEMORY_DEBUG 0
+
+extern long no_jffs_node;
+#if defined(JFFS_MEMORY_DEBUG) && JFFS_MEMORY_DEBUG
+extern long no_jffs_control;
+extern long no_jffs_raw_inode;
+extern long no_jffs_node_ref;
+extern long no_jffs_fm;
+extern long no_jffs_fmcontrol;
+extern long no_hash;
+extern long no_name;
+#define DJM(x) x
+#else
+#define DJM(x)
+#endif
+
+#endif /* __LINUX_JFFS_H__ */
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
new file mode 100644
index 000000000000..419fc953ac16
--- /dev/null
+++ b/include/linux/jffs2.h
@@ -0,0 +1,157 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001-2003 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in the 
+ * jffs2 directory.
+ *
+ * $Id: jffs2.h,v 1.34 2004/11/16 20:36:14 dwmw2 Exp $
+ *
+ */
+
+#ifndef __LINUX_JFFS2_H__
+#define __LINUX_JFFS2_H__
+
+/* You must include something which defines the C99 uintXX_t types. 
+   We don't do it from here because this file is used in too many
+   different environments. */
+
+#define JFFS2_SUPER_MAGIC 0x72b6
+
+/* Values we may expect to find in the 'magic' field */
+#define JFFS2_OLD_MAGIC_BITMASK 0x1984
+#define JFFS2_MAGIC_BITMASK 0x1985
+#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
+#define JFFS2_EMPTY_BITMASK 0xffff
+#define JFFS2_DIRTY_BITMASK 0x0000
+
+/* We only allow a single char for length, and 0xFF is empty flash so
+   we don't want it confused with a real length. Hence max 254.
+*/
+#define JFFS2_MAX_NAME_LEN 254
+
+/* How small can we sensibly write nodes? */
+#define JFFS2_MIN_DATA_LEN 128
+
+#define JFFS2_COMPR_NONE	0x00
+#define JFFS2_COMPR_ZERO	0x01
+#define JFFS2_COMPR_RTIME	0x02
+#define JFFS2_COMPR_RUBINMIPS	0x03
+#define JFFS2_COMPR_COPY	0x04
+#define JFFS2_COMPR_DYNRUBIN	0x05
+#define JFFS2_COMPR_ZLIB	0x06
+#define JFFS2_COMPR_LZO         0x07
+#define JFFS2_COMPR_LZARI       0x08
+/* Compatibility flags. */
+#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+#define JFFS2_NODE_ACCURATE 0x2000
+/* INCOMPAT: Fail to mount the filesystem */
+#define JFFS2_FEATURE_INCOMPAT 0xc000
+/* ROCOMPAT: Mount read-only */
+#define JFFS2_FEATURE_ROCOMPAT 0x8000
+/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
+/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
+
+#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
+#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
+#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+
+// Maybe later...
+//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
+
+
+#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at 
+					   mount time, don't wait for it to 
+					   happen later */
+#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific 
+					   compression type */
+
+
+/* These can go once we've made sure we've caught all uses without
+   byteswapping */
+
+typedef struct {
+	uint32_t v32;
+} __attribute__((packed))  jint32_t;
+
+typedef struct {
+	uint32_t m;
+} __attribute__((packed))  jmode_t;
+
+typedef struct {
+	uint16_t v16;
+} __attribute__((packed)) jint16_t;
+
+struct jffs2_unknown_node
+{
+	/* All start like this */
+	jint16_t magic;
+	jint16_t nodetype;
+	jint32_t totlen; /* So we can skip over nodes we don't grok */
+	jint32_t hdr_crc;
+} __attribute__((packed));
+
+struct jffs2_raw_dirent
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t pino;
+	jint32_t version;
+	jint32_t ino; /* == zero for unlink */
+	jint32_t mctime;
+	uint8_t nsize;
+	uint8_t type;
+	uint8_t unused[2];
+	jint32_t node_crc;
+	jint32_t name_crc;
+	uint8_t name[0];
+} __attribute__((packed));
+
+/* The JFFS2 raw inode structure: Used for storage on physical media.  */
+/* The uid, gid, atime, mtime and ctime members could be longer, but 
+   are left like this for space efficiency. If and when people decide
+   they really need them extended, it's simple enough to add support for
+   a new type of raw node.
+*/
+struct jffs2_raw_inode
+{
+	jint16_t magic;      /* A constant magic number.  */
+	jint16_t nodetype;   /* == JFFS_NODETYPE_INODE */
+	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
+	jint32_t hdr_crc;
+	jint32_t ino;        /* Inode number.  */
+	jint32_t version;    /* Version number.  */
+	jmode_t mode;       /* The file's type or mode.  */
+	jint16_t uid;        /* The file's owner.  */
+	jint16_t gid;        /* The file's group.  */
+	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
+	jint32_t atime;      /* Last access time.  */
+	jint32_t mtime;      /* Last modification time.  */
+	jint32_t ctime;      /* Change time.  */
+	jint32_t offset;     /* Where to begin to write.  */
+	jint32_t csize;      /* (Compressed) data size */
+	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
+	uint8_t compr;       /* Compression algorithm used */
+	uint8_t usercompr;   /* Compression algorithm requested by the user */
+	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
+	jint32_t data_crc;   /* CRC for the (compressed) data.  */
+	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
+	uint8_t data[0];
+} __attribute__((packed));
+
+union jffs2_node_union {
+	struct jffs2_raw_inode i;
+	struct jffs2_raw_dirent d;
+	struct jffs2_unknown_node u;
+};
+
+#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/linux/jffs2_fs_i.h b/include/linux/jffs2_fs_i.h
new file mode 100644
index 000000000000..6dbb1cce6646
--- /dev/null
+++ b/include/linux/jffs2_fs_i.h
@@ -0,0 +1,47 @@
+/* $Id: jffs2_fs_i.h,v 1.17 2004/11/11 23:51:27 dwmw2 Exp $ */
+
+#ifndef _JFFS2_FS_I
+#define _JFFS2_FS_I
+
+#include <linux/version.h>
+#include <linux/rbtree.h>
+#include <asm/semaphore.h>
+
+struct jffs2_inode_info {
+	/* We need an internal semaphore similar to inode->i_sem.
+	   Unfortunately, we can't used the existing one, because
+	   either the GC would deadlock, or we'd have to release it
+	   before letting GC proceed. Or we'd have to put ugliness
+	   into the GC code so it didn't attempt to obtain the i_sem
+	   for the inode(s) which are already locked */
+	struct semaphore sem;
+
+	/* The highest (datanode) version number used for this ino */
+	uint32_t highest_version;
+
+	/* List of data fragments which make up the file */
+	struct rb_root fragtree;
+
+	/* There may be one datanode which isn't referenced by any of the
+	   above fragments, if it contains a metadata update but no actual
+	   data - or if this is a directory inode */
+	/* This also holds the _only_ dnode for symlinks/device nodes, 
+	   etc. */
+	struct jffs2_full_dnode *metadata;
+
+	/* Directory entries */
+	struct jffs2_full_dirent *dents;
+
+	/* Some stuff we just have to keep in-core at all times, for each inode. */
+	struct jffs2_inode_cache *inocache;
+
+	uint16_t flags;
+	uint8_t usercompr;
+#if !defined (__ECOS)
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2)
+	struct inode vfs_inode;
+#endif
+#endif
+};
+
+#endif /* _JFFS2_FS_I */
diff --git a/include/linux/jffs2_fs_sb.h b/include/linux/jffs2_fs_sb.h
new file mode 100644
index 000000000000..4afc8d8c2e9e
--- /dev/null
+++ b/include/linux/jffs2_fs_sb.h
@@ -0,0 +1,118 @@
+/* $Id: jffs2_fs_sb.h,v 1.48 2004/11/20 10:41:12 dwmw2 Exp $ */
+
+#ifndef _JFFS2_FS_SB
+#define _JFFS2_FS_SB
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <asm/semaphore.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/rwsem.h>
+
+#define JFFS2_SB_FLAG_RO 1
+#define JFFS2_SB_FLAG_MOUNTING 2
+
+struct jffs2_inodirty;
+
+/* A struct for the overall file system control.  Pointers to
+   jffs2_sb_info structs are named `c' in the source code.  
+   Nee jffs_control
+*/
+struct jffs2_sb_info {
+	struct mtd_info *mtd;
+
+	uint32_t highest_ino;
+	uint32_t checked_ino;
+
+	unsigned int flags;
+
+	struct task_struct *gc_task;	/* GC task struct */
+	struct semaphore gc_thread_start; /* GC thread start mutex */
+	struct completion gc_thread_exit; /* GC thread exit completion port */
+
+	struct semaphore alloc_sem;	/* Used to protect all the following 
+					   fields, and also to protect against
+					   out-of-order writing of nodes. And GC. */
+	uint32_t cleanmarker_size;	/* Size of an _inline_ CLEANMARKER
+					 (i.e. zero for OOB CLEANMARKER */
+
+	uint32_t flash_size;
+	uint32_t used_size;
+	uint32_t dirty_size;
+	uint32_t wasted_size;
+	uint32_t free_size;
+	uint32_t erasing_size;
+	uint32_t bad_size;
+	uint32_t sector_size;
+	uint32_t unchecked_size;
+
+	uint32_t nr_free_blocks;
+	uint32_t nr_erasing_blocks;
+
+	/* Number of free blocks there must be before we... */
+	uint8_t resv_blocks_write;	/* ... allow a normal filesystem write */
+	uint8_t resv_blocks_deletion;	/* ... allow a normal filesystem deletion */
+	uint8_t resv_blocks_gctrigger;	/* ... wake up the GC thread */
+	uint8_t resv_blocks_gcbad;	/* ... pick a block from the bad_list to GC */
+	uint8_t resv_blocks_gcmerge;	/* ... merge pages when garbage collecting */
+
+	uint32_t nospc_dirty_size;
+
+	uint32_t nr_blocks;
+	struct jffs2_eraseblock *blocks;	/* The whole array of blocks. Used for getting blocks 
+						 * from the offset (blocks[ofs / sector_size]) */
+	struct jffs2_eraseblock *nextblock;	/* The block we're currently filling */
+
+	struct jffs2_eraseblock *gcblock;	/* The block we're currently garbage-collecting */
+
+	struct list_head clean_list;		/* Blocks 100% full of clean data */
+	struct list_head very_dirty_list;	/* Blocks with lots of dirty space */
+	struct list_head dirty_list;		/* Blocks with some dirty space */
+	struct list_head erasable_list;		/* Blocks which are completely dirty, and need erasing */
+	struct list_head erasable_pending_wbuf_list;	/* Blocks which need erasing but only after the current wbuf is flushed */
+	struct list_head erasing_list;		/* Blocks which are currently erasing */
+	struct list_head erase_pending_list;	/* Blocks which need erasing now */
+	struct list_head erase_complete_list;	/* Blocks which are erased and need the clean marker written to them */
+	struct list_head free_list;		/* Blocks which are free and ready to be used */
+	struct list_head bad_list;		/* Bad blocks. */
+	struct list_head bad_used_list;		/* Bad blocks with valid data in. */
+
+	spinlock_t erase_completion_lock;	/* Protect free_list and erasing_list 
+						   against erase completion handler */
+	wait_queue_head_t erase_wait;		/* For waiting for erases to complete */
+
+	wait_queue_head_t inocache_wq;
+	struct jffs2_inode_cache **inocache_list;
+	spinlock_t inocache_lock;
+	
+	/* Sem to allow jffs2_garbage_collect_deletion_dirent to
+	   drop the erase_completion_lock while it's holding a pointer 
+	   to an obsoleted node. I don't like this. Alternatives welcomed. */
+	struct semaphore erase_free_sem;
+
+#if defined CONFIG_JFFS2_FS_NAND || defined CONFIG_JFFS2_FS_NOR_ECC
+	/* Write-behind buffer for NAND flash */
+	unsigned char *wbuf;
+	uint32_t wbuf_ofs;
+	uint32_t wbuf_len;
+	uint32_t wbuf_pagesize;
+	struct jffs2_inodirty *wbuf_inodes;
+
+	struct rw_semaphore wbuf_sem;	/* Protects the write buffer */
+
+	/* Information about out-of-band area usage... */
+	struct nand_oobinfo *oobinfo;
+	uint32_t badblock_pos;
+	uint32_t fsdata_pos;
+	uint32_t fsdata_len;
+#endif
+
+	/* OS-private pointer for getting back to master superblock info */
+	void *os_priv;
+};
+
+#endif /* _JFFS2_FB_SB */
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
new file mode 100644
index 000000000000..82c7ae412eec
--- /dev/null
+++ b/include/linux/jhash.h
@@ -0,0 +1,143 @@
+#ifndef _LINUX_JHASH_H
+#define _LINUX_JHASH_H
+
+/* jhash.h: Jenkins hash support.
+ *
+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
+ *
+ * http://burtleburtle.net/bob/hash/
+ *
+ * These are the credits from Bob's sources:
+ *
+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+ * hash(), hash2(), hash3, and mix() are externally useful functions.
+ * Routines to test the hash are included if SELF_TEST is defined.
+ * You can use this free for any purpose.  It has no warranty.
+ *
+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ *
+ * I've modified Bob's hash to be useful in the Linux kernel, and
+ * any bugs present are surely my fault.  -DaveM
+ */
+
+/* NOTE: Arguments are modified. */
+#define __jhash_mix(a, b, c) \
+{ \
+  a -= b; a -= c; a ^= (c>>13); \
+  b -= c; b -= a; b ^= (a<<8); \
+  c -= a; c -= b; c ^= (b>>13); \
+  a -= b; a -= c; a ^= (c>>12);  \
+  b -= c; b -= a; b ^= (a<<16); \
+  c -= a; c -= b; c ^= (b>>5); \
+  a -= b; a -= c; a ^= (c>>3);  \
+  b -= c; b -= a; b ^= (a<<10); \
+  c -= a; c -= b; c ^= (b>>15); \
+}
+
+/* The golden ration: an arbitrary value */
+#define JHASH_GOLDEN_RATIO	0x9e3779b9
+
+/* The most generic version, hashes an arbitrary sequence
+ * of bytes.  No alignment or length assumptions are made about
+ * the input key.
+ */
+static inline u32 jhash(const void *key, u32 length, u32 initval)
+{
+	u32 a, b, c, len;
+	const u8 *k = key;
+
+	len = length;
+	a = b = JHASH_GOLDEN_RATIO;
+	c = initval;
+
+	while (len >= 12) {
+		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+
+		__jhash_mix(a,b,c);
+
+		k += 12;
+		len -= 12;
+	}
+
+	c += length;
+	switch (len) {
+	case 11: c += ((u32)k[10]<<24);
+	case 10: c += ((u32)k[9]<<16);
+	case 9 : c += ((u32)k[8]<<8);
+	case 8 : b += ((u32)k[7]<<24);
+	case 7 : b += ((u32)k[6]<<16);
+	case 6 : b += ((u32)k[5]<<8);
+	case 5 : b += k[4];
+	case 4 : a += ((u32)k[3]<<24);
+	case 3 : a += ((u32)k[2]<<16);
+	case 2 : a += ((u32)k[1]<<8);
+	case 1 : a += k[0];
+	};
+
+	__jhash_mix(a,b,c);
+
+	return c;
+}
+
+/* A special optimized version that handles 1 or more of u32s.
+ * The length parameter here is the number of u32s in the key.
+ */
+static inline u32 jhash2(u32 *k, u32 length, u32 initval)
+{
+	u32 a, b, c, len;
+
+	a = b = JHASH_GOLDEN_RATIO;
+	c = initval;
+	len = length;
+
+	while (len >= 3) {
+		a += k[0];
+		b += k[1];
+		c += k[2];
+		__jhash_mix(a, b, c);
+		k += 3; len -= 3;
+	}
+
+	c += length * 4;
+
+	switch (len) {
+	case 2 : b += k[1];
+	case 1 : a += k[0];
+	};
+
+	__jhash_mix(a,b,c);
+
+	return c;
+}
+
+
+/* A special ultra-optimized versions that knows they are hashing exactly
+ * 3, 2 or 1 word(s).
+ *
+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+ *       done at the end is not done here.
+ */
+static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+{
+	a += JHASH_GOLDEN_RATIO;
+	b += JHASH_GOLDEN_RATIO;
+	c += initval;
+
+	__jhash_mix(a, b, c);
+
+	return c;
+}
+
+static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+{
+	return jhash_3words(a, b, 0, initval);
+}
+
+static inline u32 jhash_1word(u32 a, u32 initval)
+{
+	return jhash_3words(a, 0, 0, initval);
+}
+
+#endif /* _LINUX_JHASH_H */
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
new file mode 100644
index 000000000000..d7a2555a886c
--- /dev/null
+++ b/include/linux/jiffies.h
@@ -0,0 +1,450 @@
+#ifndef _LINUX_JIFFIES_H
+#define _LINUX_JIFFIES_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <asm/param.h>			/* for HZ */
+#include <asm/div64.h>
+
+#ifndef div_long_long_rem
+#define div_long_long_rem(dividend,divisor,remainder) \
+({							\
+	u64 result = dividend;				\
+	*remainder = do_div(result,divisor);		\
+	result;						\
+})
+#endif
+
+/*
+ * The following defines establish the engineering parameters of the PLL
+ * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
+ * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
+ * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
+ * nearest power of two in order to avoid hardware multiply operations.
+ */
+#if HZ >= 12 && HZ < 24
+# define SHIFT_HZ	4
+#elif HZ >= 24 && HZ < 48
+# define SHIFT_HZ	5
+#elif HZ >= 48 && HZ < 96
+# define SHIFT_HZ	6
+#elif HZ >= 96 && HZ < 192
+# define SHIFT_HZ	7
+#elif HZ >= 192 && HZ < 384
+# define SHIFT_HZ	8
+#elif HZ >= 384 && HZ < 768
+# define SHIFT_HZ	9
+#elif HZ >= 768 && HZ < 1536
+# define SHIFT_HZ	10
+#else
+# error You lose.
+#endif
+
+/* LATCH is used in the interval timer and ftape setup. */
+#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
+
+/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
+ * improve accuracy by shifting LSH bits, hence calculating:
+ *     (NOM << LSH) / DEN
+ * This however means trouble for large NOM, because (NOM << LSH) may no
+ * longer fit in 32 bits. The following way of calculating this gives us
+ * some slack, under the following conditions:
+ *   - (NOM / DEN) fits in (32 - LSH) bits.
+ *   - (NOM % DEN) fits in (32 - LSH) bits.
+ */
+#define SH_DIV(NOM,DEN,LSH) (   ((NOM / DEN) << LSH)                    \
+                             + (((NOM % DEN) << LSH) + DEN / 2) / DEN)
+
+/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
+#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
+
+/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
+#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
+
+/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
+#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
+
+/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
+/* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
+#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
+
+/* some arch's have a small-data section that can be accessed register-relative
+ * but that can only take up to, say, 4-byte variables. jiffies being part of
+ * an 8-byte variable may not be correctly accessed unless we force the issue
+ */
+#define __jiffy_data  __attribute__((section(".data")))
+
+/*
+ * The 64-bit value is not volatile - you MUST NOT read it
+ * without sampling the sequence number in xtime_lock.
+ * get_jiffies_64() will do this for you as appropriate.
+ */
+extern u64 __jiffy_data jiffies_64;
+extern unsigned long volatile __jiffy_data jiffies;
+
+#if (BITS_PER_LONG < 64)
+u64 get_jiffies_64(void);
+#else
+static inline u64 get_jiffies_64(void)
+{
+	return (u64)jiffies;
+}
+#endif
+
+/*
+ *	These inlines deal with timer wrapping correctly. You are 
+ *	strongly encouraged to use them
+ *	1. Because people otherwise forget
+ *	2. Because if the timer wrap changes in future you won't have to
+ *	   alter your driver code.
+ *
+ * time_after(a,b) returns true if the time a is after time b.
+ *
+ * Do this with "<0" and ">=0" to only test the sign of the result. A
+ * good compiler would generate better code (and a really good compiler
+ * wouldn't care). Gcc is currently neither.
+ */
+#define time_after(a,b)		\
+	(typecheck(unsigned long, a) && \
+	 typecheck(unsigned long, b) && \
+	 ((long)(b) - (long)(a) < 0))
+#define time_before(a,b)	time_after(b,a)
+
+#define time_after_eq(a,b)	\
+	(typecheck(unsigned long, a) && \
+	 typecheck(unsigned long, b) && \
+	 ((long)(a) - (long)(b) >= 0))
+#define time_before_eq(a,b)	time_after_eq(b,a)
+
+/*
+ * Have the 32 bit jiffies value wrap 5 minutes after boot
+ * so jiffies wrap bugs show up earlier.
+ */
+#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
+
+/*
+ * Change timeval to jiffies, trying to avoid the
+ * most obvious overflows..
+ *
+ * And some not so obvious.
+ *
+ * Note that we don't want to return MAX_LONG, because
+ * for various timeout reasons we often end up having
+ * to wait "jiffies+1" in order to guarantee that we wait
+ * at _least_ "jiffies" - so "jiffies+1" had better still
+ * be positive.
+ */
+#define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)
+
+/*
+ * We want to do realistic conversions of time so we need to use the same
+ * values the update wall clock code uses as the jiffies size.  This value
+ * is: TICK_NSEC (which is defined in timex.h).  This
+ * is a constant and is in nanoseconds.  We will used scaled math
+ * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
+ * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
+ * constants and so are computed at compile time.  SHIFT_HZ (computed in
+ * timex.h) adjusts the scaling for different HZ values.
+
+ * Scaled math???  What is that?
+ *
+ * Scaled math is a way to do integer math on values that would,
+ * otherwise, either overflow, underflow, or cause undesired div
+ * instructions to appear in the execution path.  In short, we "scale"
+ * up the operands so they take more bits (more precision, less
+ * underflow), do the desired operation and then "scale" the result back
+ * by the same amount.  If we do the scaling by shifting we avoid the
+ * costly mpy and the dastardly div instructions.
+
+ * Suppose, for example, we want to convert from seconds to jiffies
+ * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
+ * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
+ * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
+ * might calculate at compile time, however, the result will only have
+ * about 3-4 bits of precision (less for smaller values of HZ).
+ *
+ * So, we scale as follows:
+ * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
+ * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
+ * Then we make SCALE a power of two so:
+ * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
+ * Now we define:
+ * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
+ * jiff = (sec * SEC_CONV) >> SCALE;
+ *
+ * Often the math we use will expand beyond 32-bits so we tell C how to
+ * do this and pass the 64-bit result of the mpy through the ">> SCALE"
+ * which should take the result back to 32-bits.  We want this expansion
+ * to capture as much precision as possible.  At the same time we don't
+ * want to overflow so we pick the SCALE to avoid this.  In this file,
+ * that means using a different scale for each range of HZ values (as
+ * defined in timex.h).
+ *
+ * For those who want to know, gcc will give a 64-bit result from a "*"
+ * operator if the result is a long long AND at least one of the
+ * operands is cast to long long (usually just prior to the "*" so as
+ * not to confuse it into thinking it really has a 64-bit operand,
+ * which, buy the way, it can do, but it take more code and at least 2
+ * mpys).
+
+ * We also need to be aware that one second in nanoseconds is only a
+ * couple of bits away from overflowing a 32-bit word, so we MUST use
+ * 64-bits to get the full range time in nanoseconds.
+
+ */
+
+/*
+ * Here are the scales we will use.  One for seconds, nanoseconds and
+ * microseconds.
+ *
+ * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
+ * check if the sign bit is set.  If not, we bump the shift count by 1.
+ * (Gets an extra bit of precision where we can use it.)
+ * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
+ * Haven't tested others.
+
+ * Limits of cpp (for #if expressions) only long (no long long), but
+ * then we only need the most signicant bit.
+ */
+
+#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
+#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
+#undef SEC_JIFFIE_SC
+#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
+#endif
+#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
+#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
+#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
+                                TICK_NSEC -1) / (u64)TICK_NSEC))
+
+#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
+                                        TICK_NSEC -1) / (u64)TICK_NSEC))
+#define USEC_CONVERSION  \
+                    ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
+                                        TICK_NSEC -1) / (u64)TICK_NSEC))
+/*
+ * USEC_ROUND is used in the timeval to jiffie conversion.  See there
+ * for more details.  It is the scaled resolution rounding value.  Note
+ * that it is a 64-bit value.  Since, when it is applied, we are already
+ * in jiffies (albit scaled), it is nothing but the bits we will shift
+ * off.
+ */
+#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
+/*
+ * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
+ * into seconds.  The 64-bit case will overflow if we are not careful,
+ * so use the messy SH_DIV macro to do it.  Still all constants.
+ */
+#if BITS_PER_LONG < 64
+# define MAX_SEC_IN_JIFFIES \
+	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
+#else	/* take care of overflow on 64 bits machines */
+# define MAX_SEC_IN_JIFFIES \
+	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
+
+#endif
+
+/*
+ * Convert jiffies to milliseconds and back.
+ *
+ * Avoid unnecessary multiplications/divisions in the
+ * two most common HZ cases:
+ */
+static inline unsigned int jiffies_to_msecs(const unsigned long j)
+{
+#if HZ <= 1000 && !(1000 % HZ)
+	return (1000 / HZ) * j;
+#elif HZ > 1000 && !(HZ % 1000)
+	return (j + (HZ / 1000) - 1)/(HZ / 1000);
+#else
+	return (j * 1000) / HZ;
+#endif
+}
+
+static inline unsigned int jiffies_to_usecs(const unsigned long j)
+{
+#if HZ <= 1000000 && !(1000000 % HZ)
+	return (1000000 / HZ) * j;
+#elif HZ > 1000000 && !(HZ % 1000000)
+	return (j + (HZ / 1000000) - 1)/(HZ / 1000000);
+#else
+	return (j * 1000000) / HZ;
+#endif
+}
+
+static inline unsigned long msecs_to_jiffies(const unsigned int m)
+{
+	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+#if HZ <= 1000 && !(1000 % HZ)
+	return (m + (1000 / HZ) - 1) / (1000 / HZ);
+#elif HZ > 1000 && !(HZ % 1000)
+	return m * (HZ / 1000);
+#else
+	return (m * HZ + 999) / 1000;
+#endif
+}
+
+static inline unsigned long usecs_to_jiffies(const unsigned int u)
+{
+	if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+#if HZ <= 1000000 && !(1000000 % HZ)
+	return (u + (1000000 / HZ) - 1) / (1000000 / HZ);
+#elif HZ > 1000000 && !(HZ % 1000000)
+	return u * (HZ / 1000000);
+#else
+	return (u * HZ + 999999) / 1000000;
+#endif
+}
+
+/*
+ * The TICK_NSEC - 1 rounds up the value to the next resolution.  Note
+ * that a remainder subtract here would not do the right thing as the
+ * resolution values don't fall on second boundries.  I.e. the line:
+ * nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
+ *
+ * Rather, we just shift the bits off the right.
+ *
+ * The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
+ * value to a scaled second value.
+ */
+static __inline__ unsigned long
+timespec_to_jiffies(const struct timespec *value)
+{
+	unsigned long sec = value->tv_sec;
+	long nsec = value->tv_nsec + TICK_NSEC - 1;
+
+	if (sec >= MAX_SEC_IN_JIFFIES){
+		sec = MAX_SEC_IN_JIFFIES;
+		nsec = 0;
+	}
+	return (((u64)sec * SEC_CONVERSION) +
+		(((u64)nsec * NSEC_CONVERSION) >>
+		 (NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+
+}
+
+static __inline__ void
+jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
+{
+	/*
+	 * Convert jiffies to nanoseconds and separate with
+	 * one divide.
+	 */
+	u64 nsec = (u64)jiffies * TICK_NSEC;
+	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
+}
+
+/* Same for "timeval"
+ *
+ * Well, almost.  The problem here is that the real system resolution is
+ * in nanoseconds and the value being converted is in micro seconds.
+ * Also for some machines (those that use HZ = 1024, in-particular),
+ * there is a LARGE error in the tick size in microseconds.
+
+ * The solution we use is to do the rounding AFTER we convert the
+ * microsecond part.  Thus the USEC_ROUND, the bits to be shifted off.
+ * Instruction wise, this should cost only an additional add with carry
+ * instruction above the way it was done above.
+ */
+static __inline__ unsigned long
+timeval_to_jiffies(const struct timeval *value)
+{
+	unsigned long sec = value->tv_sec;
+	long usec = value->tv_usec;
+
+	if (sec >= MAX_SEC_IN_JIFFIES){
+		sec = MAX_SEC_IN_JIFFIES;
+		usec = 0;
+	}
+	return (((u64)sec * SEC_CONVERSION) +
+		(((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
+		 (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+}
+
+static __inline__ void
+jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
+{
+	/*
+	 * Convert jiffies to nanoseconds and separate with
+	 * one divide.
+	 */
+	u64 nsec = (u64)jiffies * TICK_NSEC;
+	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
+	value->tv_usec /= NSEC_PER_USEC;
+}
+
+/*
+ * Convert jiffies/jiffies_64 to clock_t and back.
+ */
+static inline clock_t jiffies_to_clock_t(long x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
+	return x / (HZ / USER_HZ);
+#else
+	u64 tmp = (u64)x * TICK_NSEC;
+	do_div(tmp, (NSEC_PER_SEC / USER_HZ));
+	return (long)tmp;
+#endif
+}
+
+static inline unsigned long clock_t_to_jiffies(unsigned long x)
+{
+#if (HZ % USER_HZ)==0
+	if (x >= ~0UL / (HZ / USER_HZ))
+		return ~0UL;
+	return x * (HZ / USER_HZ);
+#else
+	u64 jif;
+
+	/* Don't worry about loss of precision here .. */
+	if (x >= ~0UL / HZ * USER_HZ)
+		return ~0UL;
+
+	/* .. but do try to contain it here */
+	jif = x * (u64) HZ;
+	do_div(jif, USER_HZ);
+	return jif;
+#endif
+}
+
+static inline u64 jiffies_64_to_clock_t(u64 x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
+	do_div(x, HZ / USER_HZ);
+#else
+	/*
+	 * There are better ways that don't overflow early,
+	 * but even this doesn't overflow in hundreds of years
+	 * in 64 bits, so..
+	 */
+	x *= TICK_NSEC;
+	do_div(x, (NSEC_PER_SEC / USER_HZ));
+#endif
+	return x;
+}
+
+static inline u64 nsec_to_clock_t(u64 x)
+{
+#if (NSEC_PER_SEC % USER_HZ) == 0
+	do_div(x, (NSEC_PER_SEC / USER_HZ));
+#elif (USER_HZ % 512) == 0
+	x *= USER_HZ/512;
+	do_div(x, (NSEC_PER_SEC / 512));
+#else
+	/*
+         * max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
+         * overflow after 64.99 years.
+         * exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
+         */
+	x *= 9;
+	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2))
+	                          / USER_HZ));
+#endif
+	return x;
+}
+
+#endif
diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h
new file mode 100644
index 000000000000..8a62d1e84b9b
--- /dev/null
+++ b/include/linux/journal-head.h
@@ -0,0 +1,92 @@
+/*
+ * include/linux/journal-head.h
+ *
+ * buffer_head fields for JBD
+ *
+ * 27 May 2001 Andrew Morton <akpm@digeo.com>
+ *	Created - pulled out of fs.h
+ */
+
+#ifndef JOURNAL_HEAD_H_INCLUDED
+#define JOURNAL_HEAD_H_INCLUDED
+
+typedef unsigned int		tid_t;		/* Unique transaction ID */
+typedef struct transaction_s	transaction_t;	/* Compound transaction type */
+struct buffer_head;
+
+struct journal_head {
+	/*
+	 * Points back to our buffer_head. [jbd_lock_bh_journal_head()]
+	 */
+	struct buffer_head *b_bh;
+
+	/*
+	 * Reference count - see description in journal.c
+	 * [jbd_lock_bh_journal_head()]
+	 */
+	int b_jcount;
+
+	/*
+	 * Journalling list for this buffer [jbd_lock_bh_state()]
+	 */
+	unsigned b_jlist;
+
+	/*
+	 * This flag signals the buffer has been modified by
+	 * the currently running transaction
+	 * [jbd_lock_bh_state()]
+	 */
+	unsigned b_modified;
+
+	/*
+	 * Copy of the buffer data frozen for writing to the log.
+	 * [jbd_lock_bh_state()]
+	 */
+	char *b_frozen_data;
+
+	/*
+	 * Pointer to a saved copy of the buffer containing no uncommitted
+	 * deallocation references, so that allocations can avoid overwriting
+	 * uncommitted deletes. [jbd_lock_bh_state()]
+	 */
+	char *b_committed_data;
+
+	/*
+	 * Pointer to the compound transaction which owns this buffer's
+	 * metadata: either the running transaction or the committing
+	 * transaction (if there is one).  Only applies to buffers on a
+	 * transaction's data or metadata journaling list.
+	 * [j_list_lock] [jbd_lock_bh_state()]
+	 */
+	transaction_t *b_transaction;
+
+	/*
+	 * Pointer to the running compound transaction which is currently
+	 * modifying the buffer's metadata, if there was already a transaction
+	 * committing it when the new transaction touched it.
+	 * [t_list_lock] [jbd_lock_bh_state()]
+	 */
+	transaction_t *b_next_transaction;
+
+	/*
+	 * Doubly-linked list of buffers on a transaction's data, metadata or
+	 * forget queue. [t_list_lock] [jbd_lock_bh_state()]
+	 */
+	struct journal_head *b_tnext, *b_tprev;
+
+	/*
+	 * Pointer to the compound transaction against which this buffer
+	 * is checkpointed.  Only dirty buffers can be checkpointed.
+	 * [j_list_lock]
+	 */
+	transaction_t *b_cp_transaction;
+
+	/*
+	 * Doubly-linked list of buffers still remaining to be flushed
+	 * before an old transaction can be checkpointed.
+	 * [j_list_lock]
+	 */
+	struct journal_head *b_cpnext, *b_cpprev;
+};
+
+#endif		/* JOURNAL_HEAD_H_INCLUDED */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
new file mode 100644
index 000000000000..b7e0ab622cd7
--- /dev/null
+++ b/include/linux/joystick.h
@@ -0,0 +1,128 @@
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
+
+/*
+ * $Id: joystick.h,v 1.3 2000/11/30 11:07:05 vojtech Exp $
+ *
+ *  Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+
+#include <asm/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION		0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
+#define JS_EVENT_AXIS		0x02	/* joystick moved */
+#define JS_EVENT_INIT		0x80	/* initial state of device */
+
+struct js_event {
+	__u32 time;	/* event timestamp in milliseconds */
+	__s16 value;	/* value */
+	__u8 type;	/* event type */
+	__u8 number;	/* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
+
+#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
+#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
+#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
+
+#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
+#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
+
+#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_MAX + 1])		/* set axis mapping */
+#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_MAX + 1])		/* get axis mapping */
+#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
+#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE		0x00	/* returns raw values */
+#define JS_CORR_BROKEN		0x01	/* broken line */
+
+struct js_corr {
+	__s32 coef[8];
+	__s16 prec;
+	__u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE			1
+#define JS_FALSE		0
+#define JS_X_0			0x01
+#define JS_Y_0			0x02
+#define JS_X_1			0x04
+#define JS_Y_1			0x08
+#define JS_MAX			2
+
+#define JS_DEF_TIMEOUT		0x1300
+#define JS_DEF_CORR		0
+#define JS_DEF_TIMELIMIT	10L
+
+#define JS_SET_CAL		1
+#define JS_GET_CAL		2
+#define JS_SET_TIMEOUT		3
+#define JS_GET_TIMEOUT		4
+#define JS_SET_TIMELIMIT	5
+#define JS_GET_TIMELIMIT	6
+#define JS_GET_ALL		7
+#define JS_SET_ALL		8
+
+struct JS_DATA_TYPE {
+	int buttons;
+	int x;
+	int y;
+};
+
+struct JS_DATA_SAVE_TYPE {
+	int JS_TIMEOUT;
+	int BUSY;
+	long JS_EXPIRETIME;
+	long JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+#endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
new file mode 100644
index 000000000000..9bbd04092365
--- /dev/null
+++ b/include/linux/kallsyms.h
@@ -0,0 +1,67 @@
+/* Rewritten and vastly simplified by Rusty Russell for in-kernel
+ * module loader:
+ *   Copyright 2002 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
+ */
+#ifndef _LINUX_KALLSYMS_H
+#define _LINUX_KALLSYMS_H
+
+#include <linux/config.h>
+
+#define KSYM_NAME_LEN 127
+
+#ifdef CONFIG_KALLSYMS
+/* Lookup the address for a symbol. Returns 0 if not found. */
+unsigned long kallsyms_lookup_name(const char *name);
+
+/* Lookup an address.  modname is set to NULL if it's in the kernel. */
+const char *kallsyms_lookup(unsigned long addr,
+			    unsigned long *symbolsize,
+			    unsigned long *offset,
+			    char **modname, char *namebuf);
+
+/* Replace "%s" in format with address, if found */
+extern void __print_symbol(const char *fmt, unsigned long address);
+
+#else /* !CONFIG_KALLSYMS */
+
+static inline unsigned long kallsyms_lookup_name(const char *name)
+{
+	return 0;
+}
+
+static inline const char *kallsyms_lookup(unsigned long addr,
+					  unsigned long *symbolsize,
+					  unsigned long *offset,
+					  char **modname, char *namebuf)
+{
+	return NULL;
+}
+
+/* Stupid that this does nothing, but I didn't create this mess. */
+#define __print_symbol(fmt, addr)
+#endif /*CONFIG_KALLSYMS*/
+
+/* This macro allows us to keep printk typechecking */
+static void __check_printsym_format(const char *fmt, ...)
+__attribute__((format(printf,1,2)));
+static inline void __check_printsym_format(const char *fmt, ...)
+{
+}
+/* ia64 and ppc64 use function descriptors, which contain the real address */
+#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
+#define print_fn_descriptor_symbol(fmt, addr)		\
+do {						\
+	unsigned long *__faddr = (unsigned long*) addr;		\
+	print_symbol(fmt, __faddr[0]);		\
+} while (0)
+#else
+#define print_fn_descriptor_symbol(fmt, addr) print_symbol(fmt, addr)
+#endif
+
+#define print_symbol(fmt, addr)			\
+do {						\
+	__check_printsym_format(fmt, "");	\
+	__print_symbol(fmt, addr);		\
+} while(0)
+
+#endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kbd_diacr.h b/include/linux/kbd_diacr.h
new file mode 100644
index 000000000000..1c1a3ff0535b
--- /dev/null
+++ b/include/linux/kbd_diacr.h
@@ -0,0 +1,8 @@
+#ifndef _DIACR_H
+#define _DIACR_H
+#include <linux/kd.h>
+
+extern struct kbdiacr accent_table[];
+extern unsigned int accent_table_size;
+
+#endif /* _DIACR_H */
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
new file mode 100644
index 000000000000..7428198111eb
--- /dev/null
+++ b/include/linux/kbd_kern.h
@@ -0,0 +1,157 @@
+#ifndef _KBD_KERN_H
+#define _KBD_KERN_H
+
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+
+extern struct tasklet_struct keyboard_tasklet;
+
+extern int shift_state;
+
+extern char *func_table[MAX_NR_FUNC];
+extern char func_buf[];
+extern char *funcbufptr;
+extern int funcbufsize, funcbufleft;
+
+/*
+ * kbd->xxx contains the VC-local things (flag settings etc..)
+ *
+ * Note: externally visible are LED_SCR, LED_NUM, LED_CAP defined in kd.h
+ *       The code in KDGETLED / KDSETLED depends on the internal and
+ *       external order being the same.
+ *
+ * Note: lockstate is used as index in the array key_map.
+ */
+struct kbd_struct {
+
+	unsigned char lockstate;
+/* 8 modifiers - the names do not have any meaning at all;
+   they can be associated to arbitrarily chosen keys */
+#define VC_SHIFTLOCK	KG_SHIFT	/* shift lock mode */
+#define VC_ALTGRLOCK	KG_ALTGR	/* altgr lock mode */
+#define VC_CTRLLOCK	KG_CTRL 	/* control lock mode */
+#define VC_ALTLOCK	KG_ALT  	/* alt lock mode */
+#define VC_SHIFTLLOCK	KG_SHIFTL	/* shiftl lock mode */
+#define VC_SHIFTRLOCK	KG_SHIFTR	/* shiftr lock mode */
+#define VC_CTRLLLOCK	KG_CTRLL 	/* ctrll lock mode */
+#define VC_CTRLRLOCK	KG_CTRLR 	/* ctrlr lock mode */
+	unsigned char slockstate; 	/* for `sticky' Shift, Ctrl, etc. */
+
+	unsigned char ledmode:2; 	/* one 2-bit value */
+#define LED_SHOW_FLAGS 0        /* traditional state */
+#define LED_SHOW_IOCTL 1        /* only change leds upon ioctl */
+#define LED_SHOW_MEM 2          /* `heartbeat': peek into memory */
+
+	unsigned char ledflagstate:4;	/* flags, not lights */
+	unsigned char default_ledflagstate:4;
+#define VC_SCROLLOCK	0	/* scroll-lock mode */
+#define VC_NUMLOCK	1	/* numeric lock mode */
+#define VC_CAPSLOCK	2	/* capslock mode */
+#define VC_KANALOCK	3	/* kanalock mode */
+
+	unsigned char kbdmode:2;	/* one 2-bit value */
+#define VC_XLATE	0	/* translate keycodes using keymap */
+#define VC_MEDIUMRAW	1	/* medium raw (keycode) mode */
+#define VC_RAW		2	/* raw (scancode) mode */
+#define VC_UNICODE	3	/* Unicode mode */
+
+	unsigned char modeflags:5;
+#define VC_APPLIC	0	/* application key mode */
+#define VC_CKMODE	1	/* cursor key mode */
+#define VC_REPEAT	2	/* keyboard repeat */
+#define VC_CRLF		3	/* 0 - enter sends CR, 1 - enter sends CRLF */
+#define VC_META		4	/* 0 - meta, 1 - meta=prefix with ESC */
+};
+
+extern struct kbd_struct kbd_table[];
+
+extern int kbd_init(void);
+
+extern unsigned char getledstate(void);
+extern void setledstate(struct kbd_struct *kbd, unsigned int led);
+
+extern int do_poke_blanked_console;
+
+extern void (*kbd_ledfunc)(unsigned int led);
+
+extern void set_console(int nr);
+extern void schedule_console_callback(void);
+
+static inline void set_leds(void)
+{
+	tasklet_schedule(&keyboard_tasklet);
+}
+
+static inline int vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	return ((kbd->modeflags >> flag) & 1);
+}
+
+static inline int vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	return ((kbd->ledflagstate >> flag) & 1);
+}
+
+static inline void set_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags |= 1 << flag;
+}
+
+static inline void set_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate |= 1 << flag;
+}
+
+static inline void clr_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags &= ~(1 << flag);
+}
+
+static inline void clr_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate &= ~(1 << flag);
+}
+
+static inline void chg_vc_kbd_lock(struct kbd_struct * kbd, int flag)
+{
+	kbd->lockstate ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_slock(struct kbd_struct * kbd, int flag)
+{
+	kbd->slockstate ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate ^= 1 << flag;
+}
+
+#define U(x) ((x) ^ 0xf000)
+
+/* keyboard.c */
+
+struct console;
+
+int getkeycode(unsigned int scancode);
+int setkeycode(unsigned int scancode, unsigned int keycode);
+void compute_shiftstate(void);
+
+/* defkeymap.c */
+
+extern unsigned int keymap_count;
+
+/* console.c */
+
+static inline void con_schedule_flip(struct tty_struct *t)
+{
+	schedule_work(&t->flip.work);
+}
+
+#endif
diff --git a/include/linux/kd.h b/include/linux/kd.h
new file mode 100644
index 000000000000..28be4fbe9044
--- /dev/null
+++ b/include/linux/kd.h
@@ -0,0 +1,175 @@
+#ifndef _LINUX_KD_H
+#define _LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT	0x4B60	/* gets font in expanded form */
+#define PIO_FONT	0x4B61	/* use font in expanded form */
+
+#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
+#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
+struct consolefontdesc {
+	unsigned short charcount;	/* characters in font (256 or 512) */
+	unsigned short charheight;	/* scan lines per character (1-32) */
+	char __user *chardata;		/* font data in expanded form */
+};
+
+#define PIO_FONTRESET   0x4B6D	/* reset to default font */
+
+#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
+#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
+
+#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
+#define KDMKTONE	0x4B30	/* generate tone */
+
+#define KDGETLED	0x4B31	/* return current led state */
+#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
+#define 	LED_SCR		0x01	/* scroll lock led */
+#define 	LED_NUM		0x02	/* num lock led */
+#define 	LED_CAP		0x04	/* caps lock led */
+
+#define KDGKBTYPE	0x4B33	/* get keyboard type */
+#define 	KB_84		0x01
+#define 	KB_101		0x02 	/* this is what we always answer */
+#define 	KB_OTHER	0x03
+
+#define KDADDIO		0x4B34	/* add i/o port as valid */
+#define KDDELIO		0x4B35	/* del i/o port as valid */
+#define KDENABIO	0x4B36	/* enable i/o to video board */
+#define KDDISABIO	0x4B37	/* disable i/o to video board */
+
+#define KDSETMODE	0x4B3A	/* set text/graphics mode */
+#define		KD_TEXT		0x00
+#define		KD_GRAPHICS	0x01
+#define		KD_TEXT0	0x02	/* obsolete */
+#define		KD_TEXT1	0x03	/* obsolete */
+#define KDGETMODE	0x4B3B	/* get current mode */
+
+#define KDMAPDISP	0x4B3C	/* map display into address space */
+#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
+
+typedef char scrnmap_t;
+#define		E_TABSZ		256
+#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
+#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
+struct unipair {
+	unsigned short unicode;
+	unsigned short fontpos;
+};
+struct unimapdesc {
+	unsigned short entry_ct;
+	struct unipair __user *entries;
+};
+#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
+struct unimapinit {
+	unsigned short advised_hashsize;  /* 0 if no opinion */
+	unsigned short advised_hashstep;  /* 0 if no opinion */
+	unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
+
+#define		K_RAW		0x00
+#define		K_XLATE		0x01
+#define		K_MEDIUMRAW	0x02
+#define		K_UNICODE	0x03
+#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
+#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
+
+#define		K_METABIT	0x03
+#define		K_ESCPREFIX	0x04
+#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
+#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
+
+#define		K_SCROLLLOCK	0x01
+#define		K_NUMLOCK	0x02
+#define		K_CAPSLOCK	0x04
+#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
+#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
+
+struct kbentry {
+	unsigned char kb_table;
+	unsigned char kb_index;
+	unsigned short kb_value;
+};
+#define		K_NORMTAB	0x00
+#define		K_SHIFTTAB	0x01
+#define		K_ALTTAB	0x02
+#define		K_ALTSHIFTTAB	0x03
+
+#define KDGKBENT	0x4B46	/* gets one entry in translation table */
+#define KDSKBENT	0x4B47	/* sets one entry in translation table */
+
+struct kbsentry {
+	unsigned char kb_func;
+	unsigned char kb_string[512];
+};
+#define KDGKBSENT	0x4B48	/* gets one function key string entry */
+#define KDSKBSENT	0x4B49	/* sets one function key string entry */
+
+struct kbdiacr {
+        unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
+#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
+
+struct kbkeycode {
+	unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
+#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
+
+#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
+
+struct kbd_repeat {
+	int delay;	/* in msec; <= 0: don't change */
+	int period;	/* in msec; <= 0: don't change */
+			/* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
+				 * actually used values are returned */
+
+#define KDFONTOP	0x4B72	/* font operations */
+
+struct console_font_op {
+	unsigned int op;	/* operation code KD_FONT_OP_* */
+	unsigned int flags;	/* KD_FONT_FLAG_* */
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char __user *data;	/* font data with height fixed to 32 */
+};
+
+struct console_font {
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char *data;	/* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET		0	/* Set font */
+#define KD_FONT_OP_GET		1	/* Get font */
+#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY		3	/* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
+#ifdef __KERNEL__
+#define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
+#endif
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+   don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
new file mode 100644
index 000000000000..bceea527dd37
--- /dev/null
+++ b/include/linux/kdev_t.h
@@ -0,0 +1,101 @@
+#ifndef _LINUX_KDEV_T_H
+#define _LINUX_KDEV_T_H
+#ifdef __KERNEL__
+#define MINORBITS	20
+#define MINORMASK	((1U << MINORBITS) - 1)
+
+#define MAJOR(dev)	((unsigned int) ((dev) >> MINORBITS))
+#define MINOR(dev)	((unsigned int) ((dev) & MINORMASK))
+#define MKDEV(ma,mi)	(((ma) << MINORBITS) | (mi))
+
+#define print_dev_t(buffer, dev)					\
+	sprintf((buffer), "%u:%u\n", MAJOR(dev), MINOR(dev))
+
+#define format_dev_t(buffer, dev)					\
+	({								\
+		sprintf(buffer, "%u:%u", MAJOR(dev), MINOR(dev));	\
+		buffer;							\
+	})
+
+/* acceptable for old filesystems */
+static inline int old_valid_dev(dev_t dev)
+{
+	return MAJOR(dev) < 256 && MINOR(dev) < 256;
+}
+
+static inline u16 old_encode_dev(dev_t dev)
+{
+	return (MAJOR(dev) << 8) | MINOR(dev);
+}
+
+static inline dev_t old_decode_dev(u16 val)
+{
+	return MKDEV((val >> 8) & 255, val & 255);
+}
+
+static inline int new_valid_dev(dev_t dev)
+{
+	return 1;
+}
+
+static inline u32 new_encode_dev(dev_t dev)
+{
+	unsigned major = MAJOR(dev);
+	unsigned minor = MINOR(dev);
+	return (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
+}
+
+static inline dev_t new_decode_dev(u32 dev)
+{
+	unsigned major = (dev & 0xfff00) >> 8;
+	unsigned minor = (dev & 0xff) | ((dev >> 12) & 0xfff00);
+	return MKDEV(major, minor);
+}
+
+static inline int huge_valid_dev(dev_t dev)
+{
+	return 1;
+}
+
+static inline u64 huge_encode_dev(dev_t dev)
+{
+	return new_encode_dev(dev);
+}
+
+static inline dev_t huge_decode_dev(u64 dev)
+{
+	return new_decode_dev(dev);
+}
+
+static inline int sysv_valid_dev(dev_t dev)
+{
+	return MAJOR(dev) < (1<<14) && MINOR(dev) < (1<<18);
+}
+
+static inline u32 sysv_encode_dev(dev_t dev)
+{
+	return MINOR(dev) | (MAJOR(dev) << 18);
+}
+
+static inline unsigned sysv_major(u32 dev)
+{
+	return (dev >> 18) & 0x3fff;
+}
+
+static inline unsigned sysv_minor(u32 dev)
+{
+	return dev & 0x3ffff;
+}
+
+
+#else /* __KERNEL__ */
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev)	((dev)>>8)
+#define MINOR(dev)	((dev) & 0xff)
+#define MKDEV(ma,mi)	((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
new file mode 100644
index 000000000000..7c1cba4a5278
--- /dev/null
+++ b/include/linux/kernel.h
@@ -0,0 +1,307 @@
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+
+#ifdef __KERNEL__
+
+#include <stdarg.h>
+#include <linux/linkage.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+#include <asm/bug.h>
+
+extern const char linux_banner[];
+
+#define INT_MAX		((int)(~0U>>1))
+#define INT_MIN		(-INT_MAX - 1)
+#define UINT_MAX	(~0U)
+#define LONG_MAX	((long)(~0UL>>1))
+#define LONG_MIN	(-LONG_MAX - 1)
+#define ULONG_MAX	(~0UL)
+
+#define STACK_MAGIC	0xdeadbeef
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1))
+
+#define	KERN_EMERG	"<0>"	/* system is unusable			*/
+#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define	KERN_CRIT	"<2>"	/* critical conditions			*/
+#define	KERN_ERR	"<3>"	/* error conditions			*/
+#define	KERN_WARNING	"<4>"	/* warning conditions			*/
+#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define	KERN_INFO	"<6>"	/* informational			*/
+#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct completion;
+
+/**
+ * might_sleep - annotation for functions that can sleep
+ *
+ * this macro will print a stack trace if it is executed in an atomic
+ * context (spinlock, irq-handler, ...).
+ *
+ * This is a useful debugging help to be able to catch problems early and not
+ * be biten later when the calling function happens to sleep when it is not
+ * supposed to.
+ */
+#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
+#define might_sleep() __might_sleep(__FILE__, __LINE__)
+#define might_sleep_if(cond) do { if (unlikely(cond)) might_sleep(); } while (0)
+void __might_sleep(char *file, int line);
+#else
+#define might_sleep() do {} while(0)
+#define might_sleep_if(cond) do {} while (0)
+#endif
+
+#define abs(x) ({				\
+		int __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+#define labs(x) ({				\
+		long __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+extern struct notifier_block *panic_notifier_list;
+extern long (*panic_blink)(long time);
+NORET_TYPE void panic(const char * fmt, ...)
+	__attribute__ ((NORET_AND format (printf, 1, 2)));
+fastcall NORET_TYPE void do_exit(long error_code)
+	ATTRIB_NORET;
+NORET_TYPE void complete_and_exit(struct completion *, long)
+	ATTRIB_NORET;
+extern unsigned long simple_strtoul(const char *,char **,unsigned int);
+extern long simple_strtol(const char *,char **,unsigned int);
+extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
+extern long long simple_strtoll(const char *,char **,unsigned int);
+extern int sprintf(char * buf, const char * fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+extern int vsprintf(char *buf, const char *, va_list)
+	__attribute__ ((format (printf, 2, 0)));
+extern int snprintf(char * buf, size_t size, const char * fmt, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
+	__attribute__ ((format (printf, 3, 0)));
+extern int scnprintf(char * buf, size_t size, const char * fmt, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
+	__attribute__ ((format (printf, 3, 0)));
+
+extern int sscanf(const char *, const char *, ...)
+	__attribute__ ((format (scanf, 2, 3)));
+extern int vsscanf(const char *, const char *, va_list)
+	__attribute__ ((format (scanf, 2, 0)));
+
+extern int get_option(char **str, int *pint);
+extern char *get_options(const char *str, int nints, int *ints);
+extern unsigned long long memparse(char *ptr, char **retptr);
+
+extern int __kernel_text_address(unsigned long addr);
+extern int kernel_text_address(unsigned long addr);
+extern int session_of_pgrp(int pgrp);
+
+asmlinkage int vprintk(const char *fmt, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+unsigned long int_sqrt(unsigned long);
+
+static inline int __attribute_pure__ long_log2(unsigned long x)
+{
+	int r = 0;
+	for (x >>= 1; x > 0; x >>= 1)
+		r++;
+	return r;
+}
+
+static inline unsigned long __attribute_const__ roundup_pow_of_two(unsigned long x)
+{
+	return (1UL << fls(x - 1));
+}
+
+extern int printk_ratelimit(void);
+extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+extern void bust_spinlocks(int yes);
+extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
+extern int panic_timeout;
+extern int panic_on_oops;
+extern int tainted;
+extern const char *print_tainted(void);
+extern void add_taint(unsigned);
+
+/* Values used for system_state */
+extern enum system_states {
+	SYSTEM_BOOTING,
+	SYSTEM_RUNNING,
+	SYSTEM_HALT,
+	SYSTEM_POWER_OFF,
+	SYSTEM_RESTART,
+} system_state;
+
+#define TAINT_PROPRIETARY_MODULE	(1<<0)
+#define TAINT_FORCED_MODULE		(1<<1)
+#define TAINT_UNSAFE_SMP		(1<<2)
+#define TAINT_FORCED_RMMOD		(1<<3)
+#define TAINT_MACHINE_CHECK		(1<<4)
+#define TAINT_BAD_PAGE			(1<<5)
+
+extern void dump_stack(void);
+
+#ifdef DEBUG
+#define pr_debug(fmt,arg...) \
+	printk(KERN_DEBUG fmt,##arg)
+#else
+#define pr_debug(fmt,arg...) \
+	do { } while (0)
+#endif
+
+#define pr_info(fmt,arg...) \
+	printk(KERN_INFO fmt,##arg)
+
+/*
+ *      Display an IP address in readable format.
+ */
+
+#define NIPQUAD(addr) \
+	((unsigned char *)&addr)[0], \
+	((unsigned char *)&addr)[1], \
+	((unsigned char *)&addr)[2], \
+	((unsigned char *)&addr)[3]
+
+#define NIP6(addr) \
+	ntohs((addr).s6_addr16[0]), \
+	ntohs((addr).s6_addr16[1]), \
+	ntohs((addr).s6_addr16[2]), \
+	ntohs((addr).s6_addr16[3]), \
+	ntohs((addr).s6_addr16[4]), \
+	ntohs((addr).s6_addr16[5]), \
+	ntohs((addr).s6_addr16[6]), \
+	ntohs((addr).s6_addr16[7])
+
+#if defined(__LITTLE_ENDIAN)
+#define HIPQUAD(addr) \
+	((unsigned char *)&addr)[3], \
+	((unsigned char *)&addr)[2], \
+	((unsigned char *)&addr)[1], \
+	((unsigned char *)&addr)[0]
+#elif defined(__BIG_ENDIAN)
+#define HIPQUAD	NIPQUAD
+#else
+#error "Please fix asm/byteorder.h"
+#endif /* __LITTLE_ENDIAN */
+
+/*
+ * min()/max() macros that also do
+ * strict type-checking.. See the
+ * "unnecessary" pointer comparison.
+ */
+#define min(x,y) ({ \
+	typeof(x) _x = (x);	\
+	typeof(y) _y = (y);	\
+	(void) (&_x == &_y);		\
+	_x < _y ? _x : _y; })
+
+#define max(x,y) ({ \
+	typeof(x) _x = (x);	\
+	typeof(y) _y = (y);	\
+	(void) (&_x == &_y);		\
+	_x > _y ? _x : _y; })
+
+/*
+ * ..and if you can't take the strict
+ * types, you can specify one yourself.
+ *
+ * Or not use min/max at all, of course.
+ */
+#define min_t(type,x,y) \
+	({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+#define max_t(type,x,y) \
+	({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
+
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+#endif /* __KERNEL__ */
+
+#define SI_LOAD_SHIFT	16
+struct sysinfo {
+	long uptime;			/* Seconds since boot */
+	unsigned long loads[3];		/* 1, 5, and 15 minute load averages */
+	unsigned long totalram;		/* Total usable main memory size */
+	unsigned long freeram;		/* Available memory size */
+	unsigned long sharedram;	/* Amount of shared memory */
+	unsigned long bufferram;	/* Memory used by buffers */
+	unsigned long totalswap;	/* Total swap space size */
+	unsigned long freeswap;		/* swap space still available */
+	unsigned short procs;		/* Number of current processes */
+	unsigned short pad;		/* explicit padding for m68k */
+	unsigned long totalhigh;	/* Total high memory size */
+	unsigned long freehigh;		/* Available high memory size */
+	unsigned int mem_unit;		/* Memory unit size in bytes */
+	char _f[20-2*sizeof(long)-sizeof(int)];	/* Padding: libc5 uses this.. */
+};
+
+extern void BUILD_BUG(void);
+#define BUILD_BUG_ON(condition) do { if (condition) BUILD_BUG(); } while(0)
+
+#ifdef CONFIG_SYSCTL
+extern int randomize_va_space;
+#else
+#define randomize_va_space 1
+#endif
+
+/* Trap pasters of __FUNCTION__ at compile-time */
+#if __GNUC__ > 2 || __GNUC_MINOR__ >= 95
+#define __FUNCTION__ (__func__)
+#endif
+
+#endif
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
new file mode 100644
index 000000000000..dba27749b428
--- /dev/null
+++ b/include/linux/kernel_stat.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_KERNEL_STAT_H
+#define _LINUX_KERNEL_STAT_H
+
+#include <linux/config.h>
+#include <asm/irq.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/percpu.h>
+#include <asm/cputime.h>
+
+/*
+ * 'kernel_stat.h' contains the definitions needed for doing
+ * some kernel statistics (CPU usage, context switches ...),
+ * used by rstatd/perfmeter
+ */
+
+struct cpu_usage_stat {
+	cputime64_t user;
+	cputime64_t nice;
+	cputime64_t system;
+	cputime64_t softirq;
+	cputime64_t irq;
+	cputime64_t idle;
+	cputime64_t iowait;
+	cputime64_t steal;
+};
+
+struct kernel_stat {
+	struct cpu_usage_stat	cpustat;
+	unsigned int irqs[NR_IRQS];
+};
+
+DECLARE_PER_CPU(struct kernel_stat, kstat);
+
+#define kstat_cpu(cpu)	per_cpu(kstat, cpu)
+/* Must have preemption disabled for this to be meaningful. */
+#define kstat_this_cpu	__get_cpu_var(kstat)
+
+extern unsigned long long nr_context_switches(void);
+
+/*
+ * Number of interrupts per specific IRQ source, since bootup
+ */
+static inline int kstat_irqs(int irq)
+{
+	int i, sum=0;
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_possible(i))
+			sum += kstat_cpu(i).irqs[irq];
+
+	return sum;
+}
+
+extern void account_user_time(struct task_struct *, cputime_t);
+extern void account_system_time(struct task_struct *, int, cputime_t);
+extern void account_steal_time(struct task_struct *, cputime_t);
+
+#endif /* _LINUX_KERNEL_STAT_H */
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
new file mode 100644
index 000000000000..891bb2cf0aa8
--- /dev/null
+++ b/include/linux/kernelcapi.h
@@ -0,0 +1,161 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ * 
+ * Kernel CAPI 2.0 Interface for Linux
+ * 
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ */
+
+#ifndef __KERNELCAPI_H__
+#define __KERNELCAPI_H__
+
+#define CAPI_MAXAPPL	240	/* maximum number of applications  */
+#define CAPI_MAXCONTR	32	/* maximum number of controller    */
+#define CAPI_MAXDATAWINDOW	8
+
+
+typedef struct kcapi_flagdef {
+	int contr;
+	int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+	char		driver[32];
+	unsigned int	port;
+	unsigned	irq;
+	unsigned int	membase;
+	int		cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE		10
+#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
+
+/* 
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF			0
+#define KCAPI_TRACE_SHORT_NO_DATA	1
+#define KCAPI_TRACE_FULL_NO_DATA	2
+#define KCAPI_TRACE_SHORT		3
+#define KCAPI_TRACE_FULL		4
+
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/skbuff.h>
+
+#define	KCI_CONTRUP	0	/* arg: struct capi_profile */
+#define	KCI_CONTRDOWN	1	/* arg: NULL */
+
+struct capi20_appl {
+	u16 applid;
+	capi_register_params rparam;
+	void (*recv_message)(struct capi20_appl *ap, struct sk_buff *skb);
+	void *private;
+
+	/* internal to kernelcapi.o */
+	unsigned long nrecvctlpkt;
+	unsigned long nrecvdatapkt;
+	unsigned long nsentctlpkt;
+	unsigned long nsentdatapkt;
+	struct semaphore recv_sem;
+	struct sk_buff_head recv_queue;
+	struct work_struct recv_work;
+	int release_in_progress;
+
+	/* ugly hack to allow for notification of added/removed
+	 * controllers. The Right Way (tm) is known. XXX
+	 */
+	void (*callback) (unsigned int cmd, __u32 contr, void *data);
+};
+
+u16 capi20_isinstalled(void);
+u16 capi20_register(struct capi20_appl *ap);
+u16 capi20_release(struct capi20_appl *ap);
+u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb);
+u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
+u16 capi20_get_version(u32 contr, struct capi_version *verp);
+u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
+u16 capi20_get_profile(u32 contr, struct capi_profile *profp);
+int capi20_manufacturer(unsigned int cmd, void __user *data);
+
+/* temporary hack XXX */
+void capi20_set_callback(struct capi20_appl *ap, 
+			 void (*callback) (unsigned int cmd, __u32 contr, void *data));
+
+
+
+#define CAPI_NOERROR                      0x0000
+
+#define CAPI_TOOMANYAPPLS		  0x1001
+#define CAPI_LOGBLKSIZETOSMALL	          0x1002
+#define CAPI_BUFFEXECEEDS64K 	          0x1003
+#define CAPI_MSGBUFSIZETOOSMALL	          0x1004
+#define CAPI_ANZLOGCONNNOTSUPPORTED	  0x1005
+#define CAPI_REGRESERVED		  0x1006
+#define CAPI_REGBUSY 		          0x1007
+#define CAPI_REGOSRESOURCEERR	          0x1008
+#define CAPI_REGNOTINSTALLED 	          0x1009
+#define CAPI_REGCTRLERNOTSUPPORTEXTEQUIP  0x100a
+#define CAPI_REGCTRLERONLYSUPPORTEXTEQUIP 0x100b
+
+#define CAPI_ILLAPPNR		          0x1101
+#define CAPI_ILLCMDORSUBCMDORMSGTOSMALL   0x1102
+#define CAPI_SENDQUEUEFULL		  0x1103
+#define CAPI_RECEIVEQUEUEEMPTY	          0x1104
+#define CAPI_RECEIVEOVERFLOW 	          0x1105
+#define CAPI_UNKNOWNNOTPAR		  0x1106
+#define CAPI_MSGBUSY 		          0x1107
+#define CAPI_MSGOSRESOURCEERR	          0x1108
+#define CAPI_MSGNOTINSTALLED 	          0x1109
+#define CAPI_MSGCTRLERNOTSUPPORTEXTEQUIP  0x110a
+#define CAPI_MSGCTRLERONLYSUPPORTEXTEQUIP 0x110b
+
+typedef enum {
+        CapiMessageNotSupportedInCurrentState = 0x2001,
+        CapiIllContrPlciNcci                  = 0x2002,
+        CapiNoPlciAvailable                   = 0x2003,
+        CapiNoNcciAvailable                   = 0x2004,
+        CapiNoListenResourcesAvailable        = 0x2005,
+        CapiNoFaxResourcesAvailable           = 0x2006,
+        CapiIllMessageParmCoding              = 0x2007,
+} RESOURCE_CODING_PROBLEM;
+
+typedef enum {
+        CapiB1ProtocolNotSupported                      = 0x3001,
+        CapiB2ProtocolNotSupported                      = 0x3002,
+        CapiB3ProtocolNotSupported                      = 0x3003,
+        CapiB1ProtocolParameterNotSupported             = 0x3004,
+        CapiB2ProtocolParameterNotSupported             = 0x3005,
+        CapiB3ProtocolParameterNotSupported             = 0x3006,
+        CapiBProtocolCombinationNotSupported            = 0x3007,
+        CapiNcpiNotSupported                            = 0x3008,
+        CapiCipValueUnknown                             = 0x3009,
+        CapiFlagsNotSupported                           = 0x300a,
+        CapiFacilityNotSupported                        = 0x300b,
+        CapiDataLengthNotSupportedByCurrentProtocol     = 0x300c,
+        CapiResetProcedureNotSupportedByCurrentProtocol = 0x300d,
+        CapiTeiAssignmentFailed                         = 0x300e,
+} REQUESTED_SERVICES_PROBLEM;
+
+typedef enum {
+	CapiSuccess                                     = 0x0000,
+	CapiSupplementaryServiceNotSupported            = 0x300e,
+	CapiRequestNotAllowedInThisState                = 0x3010,
+} SUPPLEMENTARY_SERVICE_INFO;
+
+typedef enum {
+	CapiProtocolErrorLayer1                         = 0x3301,
+	CapiProtocolErrorLayer2                         = 0x3302,
+	CapiProtocolErrorLayer3                         = 0x3303,
+	CapiTimeOut                                     = 0x3303, // SuppServiceReason
+	CapiCallGivenToOtherApplication                 = 0x3304,
+} CAPI_REASON;
+
+#endif				/* __KERNEL__ */
+
+#endif				/* __KERNELCAPI_H__ */
diff --git a/include/linux/key-ui.h b/include/linux/key-ui.h
new file mode 100644
index 000000000000..60cc7b762e78
--- /dev/null
+++ b/include/linux/key-ui.h
@@ -0,0 +1,97 @@
+/* key-ui.h: key userspace interface stuff for use by keyfs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_KEY_UI_H
+#define _LINUX_KEY_UI_H
+
+#include <linux/key.h>
+
+/* the key tree */
+extern struct rb_root key_serial_tree;
+extern spinlock_t key_serial_lock;
+
+/* required permissions */
+#define	KEY_VIEW	0x01	/* require permission to view attributes */
+#define	KEY_READ	0x02	/* require permission to read content */
+#define	KEY_WRITE	0x04	/* require permission to update / modify */
+#define	KEY_SEARCH	0x08	/* require permission to search (keyring) or find (key) */
+#define	KEY_LINK	0x10	/* require permission to link */
+#define	KEY_ALL		0x1f	/* all the above permissions */
+
+/*
+ * the keyring payload contains a list of the keys to which the keyring is
+ * subscribed
+ */
+struct keyring_list {
+	unsigned	maxkeys;	/* max keys this list can hold */
+	unsigned	nkeys;		/* number of keys currently held */
+	struct key	*keys[0];
+};
+
+
+/*
+ * check to see whether permission is granted to use a key in the desired way
+ */
+static inline int key_permission(const struct key *key, key_perm_t perm)
+{
+	key_perm_t kperm;
+
+	if (key->uid == current->fsuid)
+		kperm = key->perm >> 16;
+	else if (key->gid != -1 &&
+		 key->perm & KEY_GRP_ALL &&
+		 in_group_p(key->gid)
+		 )
+		kperm = key->perm >> 8;
+	else
+		kperm = key->perm;
+
+	kperm = kperm & perm & KEY_ALL;
+
+	return kperm == perm;
+}
+
+/*
+ * check to see whether permission is granted to use a key in at least one of
+ * the desired ways
+ */
+static inline int key_any_permission(const struct key *key, key_perm_t perm)
+{
+	key_perm_t kperm;
+
+	if (key->uid == current->fsuid)
+		kperm = key->perm >> 16;
+	else if (key->gid != -1 &&
+		 key->perm & KEY_GRP_ALL &&
+		 in_group_p(key->gid)
+		 )
+		kperm = key->perm >> 8;
+	else
+		kperm = key->perm;
+
+	kperm = kperm & perm & KEY_ALL;
+
+	return kperm != 0;
+}
+
+
+extern struct key *lookup_user_key(key_serial_t id, int create, int part,
+				   key_perm_t perm);
+
+extern long join_session_keyring(const char *name);
+
+extern struct key_type *key_type_lookup(const char *type);
+extern void key_type_put(struct key_type *ktype);
+
+#define key_negative_timeout	60	/* default timeout on a negative key's existence */
+
+
+#endif /* _LINUX_KEY_UI_H */
diff --git a/include/linux/key.h b/include/linux/key.h
new file mode 100644
index 000000000000..6aa46d0e812f
--- /dev/null
+++ b/include/linux/key.h
@@ -0,0 +1,291 @@
+/* key.h: authentication token and access key management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * See Documentation/keys.txt for information on keys/keyrings.
+ */
+
+#ifndef _LINUX_KEY_H
+#define _LINUX_KEY_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#ifdef __KERNEL__
+
+/* key handle serial number */
+typedef int32_t key_serial_t;
+
+/* key handle permissions mask */
+typedef uint32_t key_perm_t;
+
+struct key;
+
+#ifdef CONFIG_KEYS
+
+#undef KEY_DEBUGGING
+
+#define KEY_USR_VIEW	0x00010000	/* user can view a key's attributes */
+#define KEY_USR_READ	0x00020000	/* user can read key payload / view keyring */
+#define KEY_USR_WRITE	0x00040000	/* user can update key payload / add link to keyring */
+#define KEY_USR_SEARCH	0x00080000	/* user can find a key in search / search a keyring */
+#define KEY_USR_LINK	0x00100000	/* user can create a link to a key/keyring */
+#define KEY_USR_ALL	0x001f0000
+
+#define KEY_GRP_VIEW	0x00000100	/* group permissions... */
+#define KEY_GRP_READ	0x00000200
+#define KEY_GRP_WRITE	0x00000400
+#define KEY_GRP_SEARCH	0x00000800
+#define KEY_GRP_LINK	0x00001000
+#define KEY_GRP_ALL	0x00001f00
+
+#define KEY_OTH_VIEW	0x00000001	/* third party permissions... */
+#define KEY_OTH_READ	0x00000002
+#define KEY_OTH_WRITE	0x00000004
+#define KEY_OTH_SEARCH	0x00000008
+#define KEY_OTH_LINK	0x00000010
+#define KEY_OTH_ALL	0x0000001f
+
+struct seq_file;
+struct user_struct;
+struct signal_struct;
+
+struct key_type;
+struct key_owner;
+struct keyring_list;
+struct keyring_name;
+
+/*****************************************************************************/
+/*
+ * authentication token / access credential / keyring
+ * - types of key include:
+ *   - keyrings
+ *   - disk encryption IDs
+ *   - Kerberos TGTs and tickets
+ */
+struct key {
+	atomic_t		usage;		/* number of references */
+	key_serial_t		serial;		/* key serial number */
+	struct rb_node		serial_node;
+	struct key_type		*type;		/* type of key */
+	rwlock_t		lock;		/* examination vs change lock */
+	struct rw_semaphore	sem;		/* change vs change sem */
+	struct key_user		*user;		/* owner of this key */
+	time_t			expiry;		/* time at which key expires (or 0) */
+	uid_t			uid;
+	gid_t			gid;
+	key_perm_t		perm;		/* access permissions */
+	unsigned short		quotalen;	/* length added to quota */
+	unsigned short		datalen;	/* payload data length */
+	unsigned short		flags;		/* status flags (change with lock writelocked) */
+#define KEY_FLAG_INSTANTIATED	0x00000001	/* set if key has been instantiated */
+#define KEY_FLAG_DEAD		0x00000002	/* set if key type has been deleted */
+#define KEY_FLAG_REVOKED	0x00000004	/* set if key had been revoked */
+#define KEY_FLAG_IN_QUOTA	0x00000008	/* set if key consumes quota */
+#define KEY_FLAG_USER_CONSTRUCT	0x00000010	/* set if key is being constructed in userspace */
+#define KEY_FLAG_NEGATIVE	0x00000020	/* set if key is negative */
+
+#ifdef KEY_DEBUGGING
+	unsigned		magic;
+#define KEY_DEBUG_MAGIC		0x18273645u
+#define KEY_DEBUG_MAGIC_X	0xf8e9dacbu
+#endif
+
+	/* the description string
+	 * - this is used to match a key against search criteria
+	 * - this should be a printable string
+	 * - eg: for krb5 AFS, this might be "afs@REDHAT.COM"
+	 */
+	char			*description;
+
+	/* type specific data
+	 * - this is used by the keyring type to index the name
+	 */
+	union {
+		struct list_head	link;
+	} type_data;
+
+	/* key data
+	 * - this is used to hold the data actually used in cryptography or
+	 *   whatever
+	 */
+	union {
+		unsigned long		value;
+		void			*data;
+		struct keyring_list	*subscriptions;
+	} payload;
+};
+
+/*****************************************************************************/
+/*
+ * kernel managed key type definition
+ */
+struct key_type {
+	/* name of the type */
+	const char *name;
+
+	/* default payload length for quota precalculation (optional)
+	 * - this can be used instead of calling key_payload_reserve(), that
+	 *   function only needs to be called if the real datalen is different
+	 */
+	size_t def_datalen;
+
+	/* instantiate a key of this type
+	 * - this method should call key_payload_reserve() to determine if the
+	 *   user's quota will hold the payload
+	 */
+	int (*instantiate)(struct key *key, const void *data, size_t datalen);
+
+	/* duplicate a key of this type (optional)
+	 * - the source key will be locked against change
+	 * - the new description will be attached
+	 * - the quota will have been adjusted automatically from
+	 *   source->quotalen
+	 */
+	int (*duplicate)(struct key *key, const struct key *source);
+
+	/* update a key of this type (optional)
+	 * - this method should call key_payload_reserve() to recalculate the
+	 *   quota consumption
+	 * - the key must be locked against read when modifying
+	 */
+	int (*update)(struct key *key, const void *data, size_t datalen);
+
+	/* match a key against a description */
+	int (*match)(const struct key *key, const void *desc);
+
+	/* clear the data from a key (optional) */
+	void (*destroy)(struct key *key);
+
+	/* describe a key */
+	void (*describe)(const struct key *key, struct seq_file *p);
+
+	/* read a key's data (optional)
+	 * - permission checks will be done by the caller
+	 * - the key's semaphore will be readlocked by the caller
+	 * - should return the amount of data that could be read, no matter how
+	 *   much is copied into the buffer
+	 * - shouldn't do the copy if the buffer is NULL
+	 */
+	long (*read)(const struct key *key, char __user *buffer, size_t buflen);
+
+	/* internal fields */
+	struct list_head	link;		/* link in types list */
+};
+
+extern struct key_type key_type_keyring;
+
+extern int register_key_type(struct key_type *ktype);
+extern void unregister_key_type(struct key_type *ktype);
+
+extern struct key *key_alloc(struct key_type *type,
+			     const char *desc,
+			     uid_t uid, gid_t gid, key_perm_t perm,
+			     int not_in_quota);
+extern int key_payload_reserve(struct key *key, size_t datalen);
+extern int key_instantiate_and_link(struct key *key,
+				    const void *data,
+				    size_t datalen,
+				    struct key *keyring);
+extern int key_negate_and_link(struct key *key,
+			       unsigned timeout,
+			       struct key *keyring);
+extern void key_revoke(struct key *key);
+extern void key_put(struct key *key);
+
+static inline struct key *key_get(struct key *key)
+{
+	if (key)
+		atomic_inc(&key->usage);
+	return key;
+}
+
+extern struct key *request_key(struct key_type *type,
+			       const char *description,
+			       const char *callout_info);
+
+extern int key_validate(struct key *key);
+
+extern struct key *key_create_or_update(struct key *keyring,
+					const char *type,
+					const char *description,
+					const void *payload,
+					size_t plen,
+					int not_in_quota);
+
+extern int key_update(struct key *key,
+		      const void *payload,
+		      size_t plen);
+
+extern int key_link(struct key *keyring,
+		    struct key *key);
+
+extern int key_unlink(struct key *keyring,
+		      struct key *key);
+
+extern struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
+				 int not_in_quota, struct key *dest);
+
+extern int keyring_clear(struct key *keyring);
+
+extern struct key *keyring_search(struct key *keyring,
+				  struct key_type *type,
+				  const char *description);
+
+extern struct key *search_process_keyrings(struct key_type *type,
+					   const char *description);
+
+extern int keyring_add_key(struct key *keyring,
+			   struct key *key);
+
+extern struct key *key_lookup(key_serial_t id);
+
+#define key_serial(key) ((key) ? (key)->serial : 0)
+
+/*
+ * the userspace interface
+ */
+extern struct key root_user_keyring, root_session_keyring;
+extern int alloc_uid_keyring(struct user_struct *user);
+extern void switch_uid_keyring(struct user_struct *new_user);
+extern int copy_keys(unsigned long clone_flags, struct task_struct *tsk);
+extern int copy_thread_group_keys(struct task_struct *tsk);
+extern void exit_keys(struct task_struct *tsk);
+extern void exit_thread_group_keys(struct signal_struct *tg);
+extern int suid_keys(struct task_struct *tsk);
+extern int exec_keys(struct task_struct *tsk);
+extern void key_fsuid_changed(struct task_struct *tsk);
+extern void key_fsgid_changed(struct task_struct *tsk);
+extern void key_init(void);
+
+#else /* CONFIG_KEYS */
+
+#define key_validate(k)			0
+#define key_serial(k)			0
+#define key_get(k) 			NULL
+#define key_put(k)			do { } while(0)
+#define alloc_uid_keyring(u)		0
+#define switch_uid_keyring(u)		do { } while(0)
+#define copy_keys(f,t)			0
+#define copy_thread_group_keys(t)	0
+#define exit_keys(t)			do { } while(0)
+#define exit_thread_group_keys(tg)	do { } while(0)
+#define suid_keys(t)			do { } while(0)
+#define exec_keys(t)			do { } while(0)
+#define key_fsuid_changed(t)		do { } while(0)
+#define key_fsgid_changed(t)		do { } while(0)
+#define key_init()			do { } while(0)
+
+#endif /* CONFIG_KEYS */
+#endif /* __KERNEL__ */
+#endif /* _LINUX_KEY_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
new file mode 100644
index 000000000000..08488042d74a
--- /dev/null
+++ b/include/linux/keyboard.h
@@ -0,0 +1,431 @@
+#ifndef __LINUX_KEYBOARD_H
+#define __LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT	0
+#define KG_CTRL		2
+#define KG_ALT		3
+#define KG_ALTGR	1
+#define KG_SHIFTL	4
+#define KG_KANASHIFT	4
+#define KG_SHIFTR	5
+#define KG_CTRLL	6
+#define KG_CTRLR	7
+#define KG_CAPSSHIFT	8
+
+#define NR_SHIFT	9
+
+#define NR_KEYS		256
+#define MAX_NR_KEYMAPS	256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
+
+#ifdef __KERNEL__
+extern const int NR_TYPES;
+extern const int max_vals[];
+extern unsigned short *key_maps[MAX_NR_KEYMAPS];
+extern unsigned short plain_map[NR_KEYS];
+#endif
+
+#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
+
+#define KT_LATIN	0	/* we depend on this being zero */
+#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
+#define KT_FN		1
+#define KT_SPEC		2
+#define KT_PAD		3
+#define KT_DEAD		4
+#define KT_CONS		5
+#define KT_CUR		6
+#define KT_SHIFT	7
+#define KT_META		8
+#define KT_ASCII	9
+#define KT_LOCK		10
+#define KT_SLOCK	12
+
+#define K(t,v)		(((t)<<8)|(v))
+#define KTYP(x)		((x) >> 8)
+#define KVAL(x)		((x) & 0xff)
+
+#define K_F1		K(KT_FN,0)
+#define K_F2		K(KT_FN,1)
+#define K_F3		K(KT_FN,2)
+#define K_F4		K(KT_FN,3)
+#define K_F5		K(KT_FN,4)
+#define K_F6		K(KT_FN,5)
+#define K_F7		K(KT_FN,6)
+#define K_F8		K(KT_FN,7)
+#define K_F9		K(KT_FN,8)
+#define K_F10		K(KT_FN,9)
+#define K_F11		K(KT_FN,10)
+#define K_F12		K(KT_FN,11)
+#define K_F13		K(KT_FN,12)
+#define K_F14		K(KT_FN,13)
+#define K_F15		K(KT_FN,14)
+#define K_F16		K(KT_FN,15)
+#define K_F17		K(KT_FN,16)
+#define K_F18		K(KT_FN,17)
+#define K_F19		K(KT_FN,18)
+#define K_F20		K(KT_FN,19)
+#define K_FIND		K(KT_FN,20)
+#define K_INSERT	K(KT_FN,21)
+#define K_REMOVE	K(KT_FN,22)
+#define K_SELECT	K(KT_FN,23)
+#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO	 	K(KT_FN,26)
+#define K_HELP		K(KT_FN,27)
+#define K_DO		K(KT_FN,28)
+#define K_PAUSE	 	K(KT_FN,29)
+#define K_F21		K(KT_FN,30)
+#define K_F22		K(KT_FN,31)
+#define K_F23		K(KT_FN,32)
+#define K_F24		K(KT_FN,33)
+#define K_F25		K(KT_FN,34)
+#define K_F26		K(KT_FN,35)
+#define K_F27		K(KT_FN,36)
+#define K_F28		K(KT_FN,37)
+#define K_F29		K(KT_FN,38)
+#define K_F30		K(KT_FN,39)
+#define K_F31		K(KT_FN,40)
+#define K_F32		K(KT_FN,41)
+#define K_F33		K(KT_FN,42)
+#define K_F34		K(KT_FN,43)
+#define K_F35		K(KT_FN,44)
+#define K_F36		K(KT_FN,45)
+#define K_F37		K(KT_FN,46)
+#define K_F38		K(KT_FN,47)
+#define K_F39		K(KT_FN,48)
+#define K_F40		K(KT_FN,49)
+#define K_F41		K(KT_FN,50)
+#define K_F42		K(KT_FN,51)
+#define K_F43		K(KT_FN,52)
+#define K_F44		K(KT_FN,53)
+#define K_F45		K(KT_FN,54)
+#define K_F46		K(KT_FN,55)
+#define K_F47		K(KT_FN,56)
+#define K_F48		K(KT_FN,57)
+#define K_F49		K(KT_FN,58)
+#define K_F50		K(KT_FN,59)
+#define K_F51		K(KT_FN,60)
+#define K_F52		K(KT_FN,61)
+#define K_F53		K(KT_FN,62)
+#define K_F54		K(KT_FN,63)
+#define K_F55		K(KT_FN,64)
+#define K_F56		K(KT_FN,65)
+#define K_F57		K(KT_FN,66)
+#define K_F58		K(KT_FN,67)
+#define K_F59		K(KT_FN,68)
+#define K_F60		K(KT_FN,69)
+#define K_F61		K(KT_FN,70)
+#define K_F62		K(KT_FN,71)
+#define K_F63		K(KT_FN,72)
+#define K_F64		K(KT_FN,73)
+#define K_F65		K(KT_FN,74)
+#define K_F66		K(KT_FN,75)
+#define K_F67		K(KT_FN,76)
+#define K_F68		K(KT_FN,77)
+#define K_F69		K(KT_FN,78)
+#define K_F70		K(KT_FN,79)
+#define K_F71		K(KT_FN,80)
+#define K_F72		K(KT_FN,81)
+#define K_F73		K(KT_FN,82)
+#define K_F74		K(KT_FN,83)
+#define K_F75		K(KT_FN,84)
+#define K_F76		K(KT_FN,85)
+#define K_F77		K(KT_FN,86)
+#define K_F78		K(KT_FN,87)
+#define K_F79		K(KT_FN,88)
+#define K_F80		K(KT_FN,89)
+#define K_F81		K(KT_FN,90)
+#define K_F82		K(KT_FN,91)
+#define K_F83		K(KT_FN,92)
+#define K_F84		K(KT_FN,93)
+#define K_F85		K(KT_FN,94)
+#define K_F86		K(KT_FN,95)
+#define K_F87		K(KT_FN,96)
+#define K_F88		K(KT_FN,97)
+#define K_F89		K(KT_FN,98)
+#define K_F90		K(KT_FN,99)
+#define K_F91		K(KT_FN,100)
+#define K_F92		K(KT_FN,101)
+#define K_F93		K(KT_FN,102)
+#define K_F94		K(KT_FN,103)
+#define K_F95		K(KT_FN,104)
+#define K_F96		K(KT_FN,105)
+#define K_F97		K(KT_FN,106)
+#define K_F98		K(KT_FN,107)
+#define K_F99		K(KT_FN,108)
+#define K_F100		K(KT_FN,109)
+#define K_F101		K(KT_FN,110)
+#define K_F102		K(KT_FN,111)
+#define K_F103		K(KT_FN,112)
+#define K_F104		K(KT_FN,113)
+#define K_F105		K(KT_FN,114)
+#define K_F106		K(KT_FN,115)
+#define K_F107		K(KT_FN,116)
+#define K_F108		K(KT_FN,117)
+#define K_F109		K(KT_FN,118)
+#define K_F110		K(KT_FN,119)
+#define K_F111		K(KT_FN,120)
+#define K_F112		K(KT_FN,121)
+#define K_F113		K(KT_FN,122)
+#define K_F114		K(KT_FN,123)
+#define K_F115		K(KT_FN,124)
+#define K_F116		K(KT_FN,125)
+#define K_F117		K(KT_FN,126)
+#define K_F118		K(KT_FN,127)
+#define K_F119		K(KT_FN,128)
+#define K_F120		K(KT_FN,129)
+#define K_F121		K(KT_FN,130)
+#define K_F122		K(KT_FN,131)
+#define K_F123		K(KT_FN,132)
+#define K_F124		K(KT_FN,133)
+#define K_F125		K(KT_FN,134)
+#define K_F126		K(KT_FN,135)
+#define K_F127		K(KT_FN,136)
+#define K_F128		K(KT_FN,137)
+#define K_F129		K(KT_FN,138)
+#define K_F130		K(KT_FN,139)
+#define K_F131		K(KT_FN,140)
+#define K_F132		K(KT_FN,141)
+#define K_F133		K(KT_FN,142)
+#define K_F134		K(KT_FN,143)
+#define K_F135		K(KT_FN,144)
+#define K_F136		K(KT_FN,145)
+#define K_F137		K(KT_FN,146)
+#define K_F138		K(KT_FN,147)
+#define K_F139		K(KT_FN,148)
+#define K_F140		K(KT_FN,149)
+#define K_F141		K(KT_FN,150)
+#define K_F142		K(KT_FN,151)
+#define K_F143		K(KT_FN,152)
+#define K_F144		K(KT_FN,153)
+#define K_F145		K(KT_FN,154)
+#define K_F146		K(KT_FN,155)
+#define K_F147		K(KT_FN,156)
+#define K_F148		K(KT_FN,157)
+#define K_F149		K(KT_FN,158)
+#define K_F150		K(KT_FN,159)
+#define K_F151		K(KT_FN,160)
+#define K_F152		K(KT_FN,161)
+#define K_F153		K(KT_FN,162)
+#define K_F154		K(KT_FN,163)
+#define K_F155		K(KT_FN,164)
+#define K_F156		K(KT_FN,165)
+#define K_F157		K(KT_FN,166)
+#define K_F158		K(KT_FN,167)
+#define K_F159		K(KT_FN,168)
+#define K_F160		K(KT_FN,169)
+#define K_F161		K(KT_FN,170)
+#define K_F162		K(KT_FN,171)
+#define K_F163		K(KT_FN,172)
+#define K_F164		K(KT_FN,173)
+#define K_F165		K(KT_FN,174)
+#define K_F166		K(KT_FN,175)
+#define K_F167		K(KT_FN,176)
+#define K_F168		K(KT_FN,177)
+#define K_F169		K(KT_FN,178)
+#define K_F170		K(KT_FN,179)
+#define K_F171		K(KT_FN,180)
+#define K_F172		K(KT_FN,181)
+#define K_F173		K(KT_FN,182)
+#define K_F174		K(KT_FN,183)
+#define K_F175		K(KT_FN,184)
+#define K_F176		K(KT_FN,185)
+#define K_F177		K(KT_FN,186)
+#define K_F178		K(KT_FN,187)
+#define K_F179		K(KT_FN,188)
+#define K_F180		K(KT_FN,189)
+#define K_F181		K(KT_FN,190)
+#define K_F182		K(KT_FN,191)
+#define K_F183		K(KT_FN,192)
+#define K_F184		K(KT_FN,193)
+#define K_F185		K(KT_FN,194)
+#define K_F186		K(KT_FN,195)
+#define K_F187		K(KT_FN,196)
+#define K_F188		K(KT_FN,197)
+#define K_F189		K(KT_FN,198)
+#define K_F190		K(KT_FN,199)
+#define K_F191		K(KT_FN,200)
+#define K_F192		K(KT_FN,201)
+#define K_F193		K(KT_FN,202)
+#define K_F194		K(KT_FN,203)
+#define K_F195		K(KT_FN,204)
+#define K_F196		K(KT_FN,205)
+#define K_F197		K(KT_FN,206)
+#define K_F198		K(KT_FN,207)
+#define K_F199		K(KT_FN,208)
+#define K_F200		K(KT_FN,209)
+#define K_F201		K(KT_FN,210)
+#define K_F202		K(KT_FN,211)
+#define K_F203		K(KT_FN,212)
+#define K_F204		K(KT_FN,213)
+#define K_F205		K(KT_FN,214)
+#define K_F206		K(KT_FN,215)
+#define K_F207		K(KT_FN,216)
+#define K_F208		K(KT_FN,217)
+#define K_F209		K(KT_FN,218)
+#define K_F210		K(KT_FN,219)
+#define K_F211		K(KT_FN,220)
+#define K_F212		K(KT_FN,221)
+#define K_F213		K(KT_FN,222)
+#define K_F214		K(KT_FN,223)
+#define K_F215		K(KT_FN,224)
+#define K_F216		K(KT_FN,225)
+#define K_F217		K(KT_FN,226)
+#define K_F218		K(KT_FN,227)
+#define K_F219		K(KT_FN,228)
+#define K_F220		K(KT_FN,229)
+#define K_F221		K(KT_FN,230)
+#define K_F222		K(KT_FN,231)
+#define K_F223		K(KT_FN,232)
+#define K_F224		K(KT_FN,233)
+#define K_F225		K(KT_FN,234)
+#define K_F226		K(KT_FN,235)
+#define K_F227		K(KT_FN,236)
+#define K_F228		K(KT_FN,237)
+#define K_F229		K(KT_FN,238)
+#define K_F230		K(KT_FN,239)
+#define K_F231		K(KT_FN,240)
+#define K_F232		K(KT_FN,241)
+#define K_F233		K(KT_FN,242)
+#define K_F234		K(KT_FN,243)
+#define K_F235		K(KT_FN,244)
+#define K_F236		K(KT_FN,245)
+#define K_F237		K(KT_FN,246)
+#define K_F238		K(KT_FN,247)
+#define K_F239		K(KT_FN,248)
+#define K_F240		K(KT_FN,249)
+#define K_F241		K(KT_FN,250)
+#define K_F242		K(KT_FN,251)
+#define K_F243		K(KT_FN,252)
+#define K_F244		K(KT_FN,253)
+#define K_F245		K(KT_FN,254)
+#define K_UNDO		K(KT_FN,255)
+
+
+#define K_HOLE		K(KT_SPEC,0)
+#define K_ENTER		K(KT_SPEC,1)
+#define K_SH_REGS	K(KT_SPEC,2)
+#define K_SH_MEM	K(KT_SPEC,3)
+#define K_SH_STAT	K(KT_SPEC,4)
+#define K_BREAK		K(KT_SPEC,5)
+#define K_CONS		K(KT_SPEC,6)
+#define K_CAPS		K(KT_SPEC,7)
+#define K_NUM		K(KT_SPEC,8)
+#define K_HOLD		K(KT_SPEC,9)
+#define K_SCROLLFORW	K(KT_SPEC,10)
+#define K_SCROLLBACK	K(KT_SPEC,11)
+#define K_BOOT		K(KT_SPEC,12)
+#define K_CAPSON	K(KT_SPEC,13)
+#define K_COMPOSE	K(KT_SPEC,14)
+#define K_SAK		K(KT_SPEC,15)
+#define K_DECRCONSOLE	K(KT_SPEC,16)
+#define K_INCRCONSOLE	K(KT_SPEC,17)
+#define K_SPAWNCONSOLE	K(KT_SPEC,18)
+#define K_BARENUMLOCK	K(KT_SPEC,19)
+
+#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0		K(KT_PAD,0)
+#define K_P1		K(KT_PAD,1)
+#define K_P2		K(KT_PAD,2)
+#define K_P3		K(KT_PAD,3)
+#define K_P4		K(KT_PAD,4)
+#define K_P5		K(KT_PAD,5)
+#define K_P6		K(KT_PAD,6)
+#define K_P7		K(KT_PAD,7)
+#define K_P8		K(KT_PAD,8)
+#define K_P9		K(KT_PAD,9)
+#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
+#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
+#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
+#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
+#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
+#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
+#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
+#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
+#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
+
+#define NR_PAD		20
+
+#define K_DGRAVE	K(KT_DEAD,0)
+#define K_DACUTE	K(KT_DEAD,1)
+#define K_DCIRCM	K(KT_DEAD,2)
+#define K_DTILDE	K(KT_DEAD,3)
+#define K_DDIERE	K(KT_DEAD,4)
+#define K_DCEDIL	K(KT_DEAD,5)
+
+#define NR_DEAD		6
+
+#define K_DOWN		K(KT_CUR,0)
+#define K_LEFT		K(KT_CUR,1)
+#define K_RIGHT		K(KT_CUR,2)
+#define K_UP		K(KT_CUR,3)
+
+#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL		K(KT_SHIFT,KG_CTRL)
+#define K_ALT		K(KT_SHIFT,KG_ALT)
+#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0		K(KT_ASCII,0)
+#define K_ASC1		K(KT_ASCII,1)
+#define K_ASC2		K(KT_ASCII,2)
+#define K_ASC3		K(KT_ASCII,3)
+#define K_ASC4		K(KT_ASCII,4)
+#define K_ASC5		K(KT_ASCII,5)
+#define K_ASC6		K(KT_ASCII,6)
+#define K_ASC7		K(KT_ASCII,7)
+#define K_ASC8		K(KT_ASCII,8)
+#define K_ASC9		K(KT_ASCII,9)
+#define K_HEX0		K(KT_ASCII,10)
+#define K_HEX1		K(KT_ASCII,11)
+#define K_HEX2		K(KT_ASCII,12)
+#define K_HEX3		K(KT_ASCII,13)
+#define K_HEX4		K(KT_ASCII,14)
+#define K_HEX5		K(KT_ASCII,15)
+#define K_HEX6		K(KT_ASCII,16)
+#define K_HEX7		K(KT_ASCII,17)
+#define K_HEX8		K(KT_ASCII,18)
+#define K_HEX9		K(KT_ASCII,19)
+#define K_HEXa		K(KT_ASCII,20)
+#define K_HEXb		K(KT_ASCII,21)
+#define K_HEXc		K(KT_ASCII,22)
+#define K_HEXd		K(KT_ASCII,23)
+#define K_HEXe		K(KT_ASCII,24)
+#define K_HEXf		K(KT_ASCII,25)
+
+#define NR_ASCII	26
+
+#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+
+#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+
+#define NR_LOCK		8
+
+#define MAX_DIACR	256
+#endif
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
new file mode 100644
index 000000000000..381dedc370a3
--- /dev/null
+++ b/include/linux/keyctl.h
@@ -0,0 +1,39 @@
+/* keyctl.h: keyctl command IDs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_KEYCTL_H
+#define _LINUX_KEYCTL_H
+
+/* special process keyring shortcut IDs */
+#define KEY_SPEC_THREAD_KEYRING		-1	/* - key ID for thread-specific keyring */
+#define KEY_SPEC_PROCESS_KEYRING	-2	/* - key ID for process-specific keyring */
+#define KEY_SPEC_SESSION_KEYRING	-3	/* - key ID for session-specific keyring */
+#define KEY_SPEC_USER_KEYRING		-4	/* - key ID for UID-specific keyring */
+#define KEY_SPEC_USER_SESSION_KEYRING	-5	/* - key ID for UID-session keyring */
+#define KEY_SPEC_GROUP_KEYRING		-6	/* - key ID for GID-specific keyring */
+
+/* keyctl commands */
+#define KEYCTL_GET_KEYRING_ID		0	/* ask for a keyring's ID */
+#define KEYCTL_JOIN_SESSION_KEYRING	1	/* join or start named session keyring */
+#define KEYCTL_UPDATE			2	/* update a key */
+#define KEYCTL_REVOKE			3	/* revoke a key */
+#define KEYCTL_CHOWN			4	/* set ownership of a key */
+#define KEYCTL_SETPERM			5	/* set perms on a key */
+#define KEYCTL_DESCRIBE			6	/* describe a key */
+#define KEYCTL_CLEAR			7	/* clear contents of a keyring */
+#define KEYCTL_LINK			8	/* link a key into a keyring */
+#define KEYCTL_UNLINK			9	/* unlink a key from a keyring */
+#define KEYCTL_SEARCH			10	/* search for a key in a keyring */
+#define KEYCTL_READ			11	/* read a key or keyring's contents */
+#define KEYCTL_INSTANTIATE		12	/* instantiate a partially constructed key */
+#define KEYCTL_NEGATE			13	/* negate a partially constructed key */
+
+#endif /*  _LINUX_KEYCTL_H */
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
new file mode 100644
index 000000000000..c27cd428d269
--- /dev/null
+++ b/include/linux/kfifo.h
@@ -0,0 +1,157 @@
+/*
+ * A simple kernel FIFO implementation.
+ *
+ * Copyright (C) 2004 Stelian Pop <stelian@popies.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef _LINUX_KFIFO_H
+#define _LINUX_KFIFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+struct kfifo {
+	unsigned char *buffer;	/* the buffer holding the data */
+	unsigned int size;	/* the size of the allocated buffer */
+	unsigned int in;	/* data is added at offset (in % size) */
+	unsigned int out;	/* data is extracted from off. (out % size) */
+	spinlock_t *lock;	/* protects concurrent modifications */
+};
+
+extern struct kfifo *kfifo_init(unsigned char *buffer, unsigned int size,
+				unsigned int __nocast gfp_mask, spinlock_t *lock);
+extern struct kfifo *kfifo_alloc(unsigned int size, unsigned int __nocast gfp_mask,
+				 spinlock_t *lock);
+extern void kfifo_free(struct kfifo *fifo);
+extern unsigned int __kfifo_put(struct kfifo *fifo,
+				unsigned char *buffer, unsigned int len);
+extern unsigned int __kfifo_get(struct kfifo *fifo,
+				unsigned char *buffer, unsigned int len);
+
+/**
+ * __kfifo_reset - removes the entire FIFO contents, no locking version
+ * @fifo: the fifo to be emptied.
+ */
+static inline void __kfifo_reset(struct kfifo *fifo)
+{
+	fifo->in = fifo->out = 0;
+}
+
+/**
+ * kfifo_reset - removes the entire FIFO contents
+ * @fifo: the fifo to be emptied.
+ */
+static inline void kfifo_reset(struct kfifo *fifo)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(fifo->lock, flags);
+
+	__kfifo_reset(fifo);
+
+	spin_unlock_irqrestore(fifo->lock, flags);
+}
+
+/**
+ * kfifo_put - puts some data into the FIFO
+ * @fifo: the fifo to be used.
+ * @buffer: the data to be added.
+ * @len: the length of the data to be added.
+ *
+ * This function copies at most 'len' bytes from the 'buffer' into
+ * the FIFO depending on the free space, and returns the number of
+ * bytes copied.
+ */
+static inline unsigned int kfifo_put(struct kfifo *fifo,
+				     unsigned char *buffer, unsigned int len)
+{
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(fifo->lock, flags);
+
+	ret = __kfifo_put(fifo, buffer, len);
+
+	spin_unlock_irqrestore(fifo->lock, flags);
+
+	return ret;
+}
+
+/**
+ * kfifo_get - gets some data from the FIFO
+ * @fifo: the fifo to be used.
+ * @buffer: where the data must be copied.
+ * @len: the size of the destination buffer.
+ *
+ * This function copies at most 'len' bytes from the FIFO into the
+ * 'buffer' and returns the number of copied bytes.
+ */
+static inline unsigned int kfifo_get(struct kfifo *fifo,
+				     unsigned char *buffer, unsigned int len)
+{
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(fifo->lock, flags);
+
+	ret = __kfifo_get(fifo, buffer, len);
+
+	/*
+	 * optimization: if the FIFO is empty, set the indices to 0
+	 * so we don't wrap the next time
+	 */
+	if (fifo->in == fifo->out)
+		fifo->in = fifo->out = 0;
+
+	spin_unlock_irqrestore(fifo->lock, flags);
+
+	return ret;
+}
+
+/**
+ * __kfifo_len - returns the number of bytes available in the FIFO, no locking version
+ * @fifo: the fifo to be used.
+ */
+static inline unsigned int __kfifo_len(struct kfifo *fifo)
+{
+	return fifo->in - fifo->out;
+}
+
+/**
+ * kfifo_len - returns the number of bytes available in the FIFO
+ * @fifo: the fifo to be used.
+ */
+static inline unsigned int kfifo_len(struct kfifo *fifo)
+{
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(fifo->lock, flags);
+
+	ret = __kfifo_len(fifo);
+
+	spin_unlock_irqrestore(fifo->lock, flags);
+
+	return ret;
+}
+
+#else
+#warning "don't include kernel headers in userspace"
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/kmalloc_sizes.h b/include/linux/kmalloc_sizes.h
new file mode 100644
index 000000000000..d82d4c05c12d
--- /dev/null
+++ b/include/linux/kmalloc_sizes.h
@@ -0,0 +1,33 @@
+#if (PAGE_SIZE == 4096)
+	CACHE(32)
+#endif
+	CACHE(64)
+#if L1_CACHE_BYTES < 64
+	CACHE(96)
+#endif
+	CACHE(128)
+#if L1_CACHE_BYTES < 128
+	CACHE(192)
+#endif
+	CACHE(256)
+	CACHE(512)
+	CACHE(1024)
+	CACHE(2048)
+	CACHE(4096)
+	CACHE(8192)
+	CACHE(16384)
+	CACHE(32768)
+	CACHE(65536)
+	CACHE(131072)
+#ifndef CONFIG_MMU
+	CACHE(262144)
+	CACHE(524288)
+	CACHE(1048576)
+#ifdef CONFIG_LARGE_ALLOCS
+	CACHE(2097152)
+	CACHE(4194304)
+	CACHE(8388608)
+	CACHE(16777216)
+	CACHE(33554432)
+#endif /* CONFIG_LARGE_ALLOCS */
+#endif /* CONFIG_MMU */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
new file mode 100644
index 000000000000..95d0e4b0814d
--- /dev/null
+++ b/include/linux/kmod.h
@@ -0,0 +1,40 @@
+#ifndef __LINUX_KMOD_H__
+#define __LINUX_KMOD_H__
+
+/*
+ *	include/linux/kmod.h
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/compiler.h>
+
+#define KMOD_PATH_LEN 256
+
+#ifdef CONFIG_KMOD
+/* modprobe exit status on success, -ve on error.  Return value
+ * usually useless though. */
+extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2)));
+#else
+static inline int request_module(const char * name, ...) { return -ENOSYS; }
+#endif
+
+#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
+extern int call_usermodehelper(char *path, char *argv[], char *envp[], int wait);
+extern void usermodehelper_init(void);
+
+#endif /* __LINUX_KMOD_H__ */
diff --git a/include/linux/kobj_map.h b/include/linux/kobj_map.h
new file mode 100644
index 000000000000..b6cc10bf8dfc
--- /dev/null
+++ b/include/linux/kobj_map.h
@@ -0,0 +1,12 @@
+#ifdef __KERNEL__
+
+typedef struct kobject *kobj_probe_t(dev_t, int *, void *);
+struct kobj_map;
+
+int kobj_map(struct kobj_map *, dev_t, unsigned long, struct module *,
+	     kobj_probe_t *, int (*)(dev_t, void *), void *);
+void kobj_unmap(struct kobj_map *, dev_t, unsigned long);
+struct kobject *kobj_lookup(struct kobj_map *, dev_t, int *);
+struct kobj_map *kobj_map_init(kobj_probe_t *, struct semaphore *);
+
+#endif
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
new file mode 100644
index 000000000000..765d660d3bea
--- /dev/null
+++ b/include/linux/kobject.h
@@ -0,0 +1,259 @@
+/*
+ * kobject.h - generic kernel object infrastructure.
+ *
+ * Copyright (c) 2002-2003	Patrick Mochel
+ * Copyright (c) 2002-2003	Open Source Development Labs
+ *
+ * This file is released under the GPLv2.
+ *
+ * 
+ * Please read Documentation/kobject.txt before using the kobject
+ * interface, ESPECIALLY the parts about reference counts and object
+ * destructors. 
+ */
+
+#ifndef _KOBJECT_H_
+#define _KOBJECT_H_
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <linux/kref.h>
+#include <linux/kobject_uevent.h>
+#include <linux/kernel.h>
+#include <asm/atomic.h>
+
+#define KOBJ_NAME_LEN	20
+
+/* counter to tag the hotplug event, read only except for the kobject core */
+extern u64 hotplug_seqnum;
+
+struct kobject {
+	char			* k_name;
+	char			name[KOBJ_NAME_LEN];
+	struct kref		kref;
+	struct list_head	entry;
+	struct kobject		* parent;
+	struct kset		* kset;
+	struct kobj_type	* ktype;
+	struct dentry		* dentry;
+};
+
+extern int kobject_set_name(struct kobject *, const char *, ...)
+	__attribute__((format(printf,2,3)));
+
+static inline char * kobject_name(struct kobject * kobj)
+{
+	return kobj->k_name;
+}
+
+extern void kobject_init(struct kobject *);
+extern void kobject_cleanup(struct kobject *);
+
+extern int kobject_add(struct kobject *);
+extern void kobject_del(struct kobject *);
+
+extern int kobject_rename(struct kobject *, char *new_name);
+
+extern int kobject_register(struct kobject *);
+extern void kobject_unregister(struct kobject *);
+
+extern struct kobject * kobject_get(struct kobject *);
+extern void kobject_put(struct kobject *);
+
+extern char * kobject_get_path(struct kobject *, int);
+
+struct kobj_type {
+	void (*release)(struct kobject *);
+	struct sysfs_ops	* sysfs_ops;
+	struct attribute	** default_attrs;
+};
+
+
+/**
+ *	kset - a set of kobjects of a specific type, belonging
+ *	to a specific subsystem.
+ *
+ *	All kobjects of a kset should be embedded in an identical 
+ *	type. This type may have a descriptor, which the kset points
+ *	to. This allows there to exist sets of objects of the same
+ *	type in different subsystems.
+ *
+ *	A subsystem does not have to be a list of only one type 
+ *	of object; multiple ksets can belong to one subsystem. All 
+ *	ksets of a subsystem share the subsystem's lock.
+ *
+ *      Each kset can support hotplugging; if it does, it will be given
+ *      the opportunity to filter out specific kobjects from being
+ *      reported, as well as to add its own "data" elements to the
+ *      environment being passed to the hotplug helper.
+ */
+struct kset_hotplug_ops {
+	int (*filter)(struct kset *kset, struct kobject *kobj);
+	char *(*name)(struct kset *kset, struct kobject *kobj);
+	int (*hotplug)(struct kset *kset, struct kobject *kobj, char **envp,
+			int num_envp, char *buffer, int buffer_size);
+};
+
+struct kset {
+	struct subsystem	* subsys;
+	struct kobj_type	* ktype;
+	struct list_head	list;
+	spinlock_t		list_lock;
+	struct kobject		kobj;
+	struct kset_hotplug_ops	* hotplug_ops;
+};
+
+
+extern void kset_init(struct kset * k);
+extern int kset_add(struct kset * k);
+extern int kset_register(struct kset * k);
+extern void kset_unregister(struct kset * k);
+
+static inline struct kset * to_kset(struct kobject * kobj)
+{
+	return kobj ? container_of(kobj,struct kset,kobj) : NULL;
+}
+
+static inline struct kset * kset_get(struct kset * k)
+{
+	return k ? to_kset(kobject_get(&k->kobj)) : NULL;
+}
+
+static inline void kset_put(struct kset * k)
+{
+	kobject_put(&k->kobj);
+}
+
+static inline struct kobj_type * get_ktype(struct kobject * k)
+{
+	if (k->kset && k->kset->ktype)
+		return k->kset->ktype;
+	else 
+		return k->ktype;
+}
+
+extern struct kobject * kset_find_obj(struct kset *, const char *);
+
+
+/**
+ * Use this when initializing an embedded kset with no other 
+ * fields to initialize.
+ */
+#define set_kset_name(str)	.kset = { .kobj = { .name = str } }
+
+
+
+struct subsystem {
+	struct kset		kset;
+	struct rw_semaphore	rwsem;
+};
+
+#define decl_subsys(_name,_type,_hotplug_ops) \
+struct subsystem _name##_subsys = { \
+	.kset = { \
+		.kobj = { .name = __stringify(_name) }, \
+		.ktype = _type, \
+		.hotplug_ops =_hotplug_ops, \
+	} \
+}
+#define decl_subsys_name(_varname,_name,_type,_hotplug_ops) \
+struct subsystem _varname##_subsys = { \
+	.kset = { \
+		.kobj = { .name = __stringify(_name) }, \
+		.ktype = _type, \
+		.hotplug_ops =_hotplug_ops, \
+	} \
+}
+
+/* The global /sys/kernel/ subsystem for people to chain off of */
+extern struct subsystem kernel_subsys;
+
+/**
+ * Helpers for setting the kset of registered objects.
+ * Often, a registered object belongs to a kset embedded in a 
+ * subsystem. These do no magic, just make the resulting code
+ * easier to follow. 
+ */
+
+/**
+ *	kobj_set_kset_s(obj,subsys) - set kset for embedded kobject.
+ *	@obj:		ptr to some object type.
+ *	@subsys:	a subsystem object (not a ptr).
+ *
+ *	Can be used for any object type with an embedded ->kobj.
+ */
+
+#define kobj_set_kset_s(obj,subsys) \
+	(obj)->kobj.kset = &(subsys).kset
+
+/**
+ *	kset_set_kset_s(obj,subsys) - set kset for embedded kset.
+ *	@obj:		ptr to some object type.
+ *	@subsys:	a subsystem object (not a ptr).
+ *
+ *	Can be used for any object type with an embedded ->kset.
+ *	Sets the kset of @obj's  embedded kobject (via its embedded
+ *	kset) to @subsys.kset. This makes @obj a member of that 
+ *	kset.
+ */
+
+#define kset_set_kset_s(obj,subsys) \
+	(obj)->kset.kobj.kset = &(subsys).kset
+
+/**
+ *	subsys_set_kset(obj,subsys) - set kset for subsystem
+ *	@obj:		ptr to some object type.
+ *	@subsys:	a subsystem object (not a ptr).
+ *
+ *	Can be used for any object type with an embedded ->subsys.
+ *	Sets the kset of @obj's kobject to @subsys.kset. This makes
+ *	the object a member of that kset.
+ */
+
+#define subsys_set_kset(obj,_subsys) \
+	(obj)->subsys.kset.kobj.kset = &(_subsys).kset
+
+extern void subsystem_init(struct subsystem *);
+extern int subsystem_register(struct subsystem *);
+extern void subsystem_unregister(struct subsystem *);
+
+static inline struct subsystem * subsys_get(struct subsystem * s)
+{
+	return s ? container_of(kset_get(&s->kset),struct subsystem,kset) : NULL;
+}
+
+static inline void subsys_put(struct subsystem * s)
+{
+	kset_put(&s->kset);
+}
+
+struct subsys_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct subsystem *, char *);
+	ssize_t (*store)(struct subsystem *, const char *, size_t); 
+};
+
+extern int subsys_create_file(struct subsystem * , struct subsys_attribute *);
+extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *);
+
+#ifdef CONFIG_HOTPLUG
+void kobject_hotplug(struct kobject *kobj, enum kobject_action action);
+int add_hotplug_env_var(char **envp, int num_envp, int *cur_index,
+			char *buffer, int buffer_size, int *cur_len,
+			const char *format, ...)
+	__attribute__((format (printf, 7, 8)));
+#else
+static inline void kobject_hotplug(struct kobject *kobj, enum kobject_action action) { }
+static inline int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, 
+				      char *buffer, int buffer_size, int *cur_len, 
+				      const char *format, ...)
+{ return 0; }
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _KOBJECT_H_ */
diff --git a/include/linux/kobject_uevent.h b/include/linux/kobject_uevent.h
new file mode 100644
index 000000000000..aa664fe7e561
--- /dev/null
+++ b/include/linux/kobject_uevent.h
@@ -0,0 +1,57 @@
+/*
+ * kobject_uevent.h - list of kobject user events that can be generated
+ *
+ * Copyright (C) 2004 IBM Corp.
+ * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * This file is released under the GPLv2.
+ *
+ */
+
+#ifndef _KOBJECT_EVENT_H_
+#define _KOBJECT_EVENT_H_
+
+#define HOTPLUG_PATH_LEN	256
+
+/* path to the hotplug userspace helper executed on an event */
+extern char hotplug_path[];
+
+/*
+ * If you add an action here, you must also add the proper string to the
+ * lib/kobject_uevent.c file.
+ */
+typedef int __bitwise kobject_action_t;
+enum kobject_action {
+	KOBJ_ADD	= (__force kobject_action_t) 0x01,	/* add event, for hotplug */
+	KOBJ_REMOVE	= (__force kobject_action_t) 0x02,	/* remove event, for hotplug */
+	KOBJ_CHANGE	= (__force kobject_action_t) 0x03,	/* a sysfs attribute file has changed */
+	KOBJ_MOUNT	= (__force kobject_action_t) 0x04,	/* mount event for block devices */
+	KOBJ_UMOUNT	= (__force kobject_action_t) 0x05,	/* umount event for block devices */
+	KOBJ_OFFLINE	= (__force kobject_action_t) 0x06,	/* offline event for hotplug devices */
+	KOBJ_ONLINE	= (__force kobject_action_t) 0x07,	/* online event for hotplug devices */
+};
+
+
+#ifdef CONFIG_KOBJECT_UEVENT
+int kobject_uevent(struct kobject *kobj,
+		   enum kobject_action action,
+		   struct attribute *attr);
+int kobject_uevent_atomic(struct kobject *kobj,
+			  enum kobject_action action,
+			  struct attribute *attr);
+#else
+static inline int kobject_uevent(struct kobject *kobj,
+				 enum kobject_action action,
+				 struct attribute *attr)
+{
+	return 0;
+}
+static inline int kobject_uevent_atomic(struct kobject *kobj,
+				        enum kobject_action action,
+					struct attribute *attr)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
new file mode 100644
index 000000000000..f20c163de4f5
--- /dev/null
+++ b/include/linux/kprobes.h
@@ -0,0 +1,136 @@
+#ifndef _LINUX_KPROBES_H
+#define _LINUX_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *  include/linux/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-July	Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
+ *		interface to access function arguments.
+ */
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/smp.h>
+#include <asm/kprobes.h>
+
+struct kprobe;
+struct pt_regs;
+typedef int (*kprobe_pre_handler_t) (struct kprobe *, struct pt_regs *);
+typedef int (*kprobe_break_handler_t) (struct kprobe *, struct pt_regs *);
+typedef void (*kprobe_post_handler_t) (struct kprobe *, struct pt_regs *,
+				       unsigned long flags);
+typedef int (*kprobe_fault_handler_t) (struct kprobe *, struct pt_regs *,
+				       int trapnr);
+struct kprobe {
+	struct hlist_node hlist;
+
+	/* location of the probe point */
+	kprobe_opcode_t *addr;
+
+	/* Called before addr is executed. */
+	kprobe_pre_handler_t pre_handler;
+
+	/* Called after addr is executed, unless... */
+	kprobe_post_handler_t post_handler;
+
+	/* ... called if executing addr causes a fault (eg. page fault).
+	 * Return 1 if it handled fault, otherwise kernel will see it. */
+	kprobe_fault_handler_t fault_handler;
+
+	/* ... called if breakpoint trap occurs in probe handler.
+	 * Return 1 if it handled break, otherwise kernel will see it. */
+	kprobe_break_handler_t break_handler;
+
+	/* Saved opcode (which has been replaced with breakpoint) */
+	kprobe_opcode_t opcode;
+
+	/* copy of the original instruction */
+	struct arch_specific_insn ainsn;
+};
+
+/*
+ * Special probe type that uses setjmp-longjmp type tricks to resume
+ * execution at a specified entry with a matching prototype corresponding
+ * to the probed function - a trick to enable arguments to become
+ * accessible seamlessly by probe handling logic.
+ * Note:
+ * Because of the way compilers allocate stack space for local variables
+ * etc upfront, regardless of sub-scopes within a function, this mirroring
+ * principle currently works only for probes placed on function entry points.
+ */
+struct jprobe {
+	struct kprobe kp;
+	kprobe_opcode_t *entry;	/* probe handling code to jump to */
+};
+
+#ifdef CONFIG_KPROBES
+/* Locks kprobe: irq must be disabled */
+void lock_kprobes(void);
+void unlock_kprobes(void);
+
+/* kprobe running now on this CPU? */
+static inline int kprobe_running(void)
+{
+	extern unsigned int kprobe_cpu;
+	return kprobe_cpu == smp_processor_id();
+}
+
+extern int arch_prepare_kprobe(struct kprobe *p);
+extern void arch_copy_kprobe(struct kprobe *p);
+extern void arch_remove_kprobe(struct kprobe *p);
+extern void show_registers(struct pt_regs *regs);
+
+/* Get the kprobe at this addr (if any).  Must have called lock_kprobes */
+struct kprobe *get_kprobe(void *addr);
+
+int register_kprobe(struct kprobe *p);
+void unregister_kprobe(struct kprobe *p);
+int setjmp_pre_handler(struct kprobe *, struct pt_regs *);
+int longjmp_break_handler(struct kprobe *, struct pt_regs *);
+int register_jprobe(struct jprobe *p);
+void unregister_jprobe(struct jprobe *p);
+void jprobe_return(void);
+
+#else
+static inline int kprobe_running(void)
+{
+	return 0;
+}
+static inline int register_kprobe(struct kprobe *p)
+{
+	return -ENOSYS;
+}
+static inline void unregister_kprobe(struct kprobe *p)
+{
+}
+static inline int register_jprobe(struct jprobe *p)
+{
+	return -ENOSYS;
+}
+static inline void unregister_jprobe(struct jprobe *p)
+{
+}
+static inline void jprobe_return(void)
+{
+}
+#endif
+#endif				/* _LINUX_KPROBES_H */
diff --git a/include/linux/kref.h b/include/linux/kref.h
new file mode 100644
index 000000000000..6fee3539893f
--- /dev/null
+++ b/include/linux/kref.h
@@ -0,0 +1,32 @@
+/*
+ * kref.c - library routines for handling generic reference counted objects
+ *
+ * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2004 IBM Corp.
+ *
+ * based on kobject.h which was:
+ * Copyright (C) 2002-2003 Patrick Mochel <mochel@osdl.org>
+ * Copyright (C) 2002-2003 Open Source Development Labs
+ *
+ * This file is released under the GPLv2.
+ *
+ */
+
+#ifndef _KREF_H_
+#define _KREF_H_
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/atomic.h>
+
+struct kref {
+	atomic_t refcount;
+};
+
+void kref_init(struct kref *kref);
+void kref_get(struct kref *kref);
+int kref_put(struct kref *kref, void (*release) (struct kref *kref));
+
+#endif /* __KERNEL__ */
+#endif /* _KREF_H_ */
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
new file mode 100644
index 000000000000..3fa786448db3
--- /dev/null
+++ b/include/linux/kthread.h
@@ -0,0 +1,81 @@
+#ifndef _LINUX_KTHREAD_H
+#define _LINUX_KTHREAD_H
+/* Simple interface for creating and stopping kernel threads without mess. */
+#include <linux/err.h>
+#include <linux/sched.h>
+
+/**
+ * kthread_create: create a kthread.
+ * @threadfn: the function to run until signal_pending(current).
+ * @data: data ptr for @threadfn.
+ * @namefmt: printf-style name for the thread.
+ *
+ * Description: This helper function creates and names a kernel
+ * thread.  The thread will be stopped: use wake_up_process() to start
+ * it.  See also kthread_run(), kthread_create_on_cpu().
+ *
+ * When woken, the thread will run @threadfn() with @data as its
+ * argument. @threadfn can either call do_exit() directly if it is a
+ * standalone thread for which noone will call kthread_stop(), or
+ * return when 'kthread_should_stop()' is true (which means
+ * kthread_stop() has been called).  The return value should be zero
+ * or a negative error number: it will be passed to kthread_stop().
+ *
+ * Returns a task_struct or ERR_PTR(-ENOMEM).
+ */
+struct task_struct *kthread_create(int (*threadfn)(void *data),
+				   void *data,
+				   const char namefmt[], ...);
+
+/**
+ * kthread_run: create and wake a thread.
+ * @threadfn: the function to run until signal_pending(current).
+ * @data: data ptr for @threadfn.
+ * @namefmt: printf-style name for the thread.
+ *
+ * Description: Convenient wrapper for kthread_create() followed by
+ * wake_up_process().  Returns the kthread, or ERR_PTR(-ENOMEM). */
+#define kthread_run(threadfn, data, namefmt, ...)			   \
+({									   \
+	struct task_struct *__k						   \
+		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
+	if (!IS_ERR(__k))						   \
+		wake_up_process(__k);					   \
+	__k;								   \
+})
+
+/**
+ * kthread_bind: bind a just-created kthread to a cpu.
+ * @k: thread created by kthread_create().
+ * @cpu: cpu (might not be online, must be possible) for @k to run on.
+ *
+ * Description: This function is equivalent to set_cpus_allowed(),
+ * except that @cpu doesn't need to be online, and the thread must be
+ * stopped (ie. just returned from kthread_create().
+ */
+void kthread_bind(struct task_struct *k, unsigned int cpu);
+
+/**
+ * kthread_stop: stop a thread created by kthread_create().
+ * @k: thread created by kthread_create().
+ *
+ * Sets kthread_should_stop() for @k to return true, wakes it, and
+ * waits for it to exit.  Your threadfn() must not call do_exit()
+ * itself if you use this function!  This can also be called after
+ * kthread_create() instead of calling wake_up_process(): the thread
+ * will exit without calling threadfn().
+ *
+ * Returns the result of threadfn(), or -EINTR if wake_up_process()
+ * was never called. */
+int kthread_stop(struct task_struct *k);
+
+/**
+ * kthread_should_stop: should this kthread return now?
+ *
+ * When someone calls kthread_stop on your kthread, it will be woken
+ * and this will return true.  You should then return, and your return
+ * value will be passed through to kthread_stop().
+ */
+int kthread_should_stop(void);
+
+#endif /* _LINUX_KTHREAD_H */
diff --git a/include/linux/lapb.h b/include/linux/lapb.h
new file mode 100644
index 000000000000..ce709e1885cc
--- /dev/null
+++ b/include/linux/lapb.h
@@ -0,0 +1,56 @@
+/*
+ * These are the public elements of the Linux LAPB module.
+ */
+
+#ifndef	LAPB_KERNEL_H
+#define	LAPB_KERNEL_H
+
+#define	LAPB_OK			0
+#define	LAPB_BADTOKEN		1
+#define	LAPB_INVALUE		2
+#define	LAPB_CONNECTED		3
+#define	LAPB_NOTCONNECTED	4
+#define	LAPB_REFUSED		5
+#define	LAPB_TIMEDOUT		6
+#define	LAPB_NOMEM		7
+
+#define	LAPB_STANDARD		0x00
+#define	LAPB_EXTENDED		0x01
+
+#define	LAPB_SLP		0x00
+#define	LAPB_MLP		0x02
+
+#define	LAPB_DTE		0x00
+#define	LAPB_DCE		0x04
+
+struct lapb_register_struct {
+	void (*connect_confirmation)(struct net_device *dev, int reason);
+	void (*connect_indication)(struct net_device *dev, int reason);
+	void (*disconnect_confirmation)(struct net_device *dev, int reason);
+	void (*disconnect_indication)(struct net_device *dev, int reason);
+	int  (*data_indication)(struct net_device *dev, struct sk_buff *skb);
+	void (*data_transmit)(struct net_device *dev, struct sk_buff *skb);
+};
+
+struct lapb_parms_struct {
+	unsigned int t1;
+	unsigned int t1timer;
+	unsigned int t2;
+	unsigned int t2timer;
+	unsigned int n2;
+	unsigned int n2count;
+	unsigned int window;
+	unsigned int state;
+	unsigned int mode;
+};
+
+extern int lapb_register(struct net_device *dev, struct lapb_register_struct *callbacks);
+extern int lapb_unregister(struct net_device *dev);
+extern int lapb_getparms(struct net_device *dev, struct lapb_parms_struct *parms);
+extern int lapb_setparms(struct net_device *dev, struct lapb_parms_struct *parms);
+extern int lapb_connect_request(struct net_device *dev);
+extern int lapb_disconnect_request(struct net_device *dev);
+extern int lapb_data_request(struct net_device *dev, struct sk_buff *skb);
+extern int lapb_data_received(struct net_device *dev, struct sk_buff *skb);
+
+#endif
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
new file mode 100644
index 000000000000..d739b2e7eac2
--- /dev/null
+++ b/include/linux/lcd.h
@@ -0,0 +1,56 @@
+/*
+ * LCD Lowlevel Control Abstraction
+ *
+ * Copyright (C) 2003,2004 Hewlett-Packard Company
+ *
+ */
+
+#ifndef _LINUX_LCD_H
+#define _LINUX_LCD_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+
+struct lcd_device;
+struct fb_info;
+
+/* This structure defines all the properties of a LCD flat panel. */
+struct lcd_properties {
+	/* Owner module */
+	struct module *owner;
+	/* Get the LCD panel power status (0: full on, 1..3: controller
+	   power on, flat panel power off, 4: full off), see FB_BLANK_XXX */
+	int (*get_power)(struct lcd_device *);
+	/* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
+	int (*set_power)(struct lcd_device *, int power);
+	/* The maximum value for contrast (read-only) */
+	int max_contrast;
+	/* Get the current contrast setting (0-max_contrast) */
+	int (*get_contrast)(struct lcd_device *);
+	/* Set LCD panel contrast */
+        int (*set_contrast)(struct lcd_device *, int contrast);
+	/* Check if given framebuffer device is the one LCD is bound to;
+	   return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
+	int (*check_fb)(struct fb_info *);
+};
+
+struct lcd_device {
+	/* This protects the 'props' field. If 'props' is NULL, the driver that
+	   registered this device has been unloaded, and if class_get_devdata()
+	   points to something in the body of that driver, it is also invalid. */
+	struct semaphore sem;
+	/* If this is NULL, the backing module is unloaded */
+	struct lcd_properties *props;
+	/* The framebuffer notifier block */
+	struct notifier_block fb_notif;
+	/* The class device structure */
+	struct class_device class_dev;
+};
+
+extern struct lcd_device *lcd_device_register(const char *name,
+	void *devdata, struct lcd_properties *lp);
+extern void lcd_device_unregister(struct lcd_device *ld);
+
+#define to_lcd_device(obj) container_of(obj, struct lcd_device, class_dev)
+
+#endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
new file mode 100644
index 000000000000..505160ab472b
--- /dev/null
+++ b/include/linux/libata.h
@@ -0,0 +1,599 @@
+/*
+   Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+   Copyright 2003-2004 Jeff Garzik
+
+   The contents of this file are subject to the Open
+   Software License version 1.1 that can be found at
+   http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+   by reference.
+
+   Alternatively, the contents of this file may be used under the terms
+   of the GNU General Public License version 2 (the "GPL") as distributed
+   in the kernel source COPYING file, in which case the provisions of
+   the GPL are applicable instead of the above.  If you wish to allow
+   the use of your version of this file only under the terms of the
+   GPL and not to allow others to use your version of this file under
+   the OSL, indicate your decision by deleting the provisions above and
+   replace them with the notice and other provisions required by the GPL.
+   If you do not delete the provisions above, a recipient may use your
+   version of this file under either the OSL or the GPL.
+
+ */
+
+#ifndef __LINUX_LIBATA_H__
+#define __LINUX_LIBATA_H__
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <linux/ata.h>
+#include <linux/workqueue.h>
+
+/*
+ * compile-time options
+ */
+#undef ATA_DEBUG		/* debugging output */
+#undef ATA_VERBOSE_DEBUG	/* yet more debugging output */
+#undef ATA_IRQ_TRAP		/* define to ack screaming irqs */
+#undef ATA_NDEBUG		/* define to disable quick runtime checks */
+#undef ATA_ENABLE_ATAPI		/* define to enable ATAPI support */
+#undef ATA_ENABLE_PATA		/* define to enable PATA support in some
+				 * low-level drivers */
+#undef ATAPI_ENABLE_DMADIR	/* enables ATAPI DMADIR bridge support */
+
+
+/* note: prints function name for you */
+#ifdef ATA_DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#ifdef ATA_VERBOSE_DEBUG
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define VPRINTK(fmt, args...)
+#endif	/* ATA_VERBOSE_DEBUG */
+#else
+#define DPRINTK(fmt, args...)
+#define VPRINTK(fmt, args...)
+#endif	/* ATA_DEBUG */
+
+#ifdef ATA_NDEBUG
+#define assert(expr)
+#else
+#define assert(expr) \
+        if(unlikely(!(expr))) {                                   \
+        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
+        #expr,__FILE__,__FUNCTION__,__LINE__);          \
+        }
+#endif
+
+/* defines only for the constants which don't work well as enums */
+#define ATA_TAG_POISON		0xfafbfcfdU
+
+/* move to PCI layer? */
+static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
+{
+	return &pdev->dev;
+}
+
+enum {
+	/* various global constants */
+	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
+	ATA_MAX_PORTS		= 8,
+	ATA_DEF_QUEUE		= 1,
+	ATA_MAX_QUEUE		= 1,
+	ATA_MAX_SECTORS		= 200,	/* FIXME */
+	ATA_MAX_BUS		= 2,
+	ATA_DEF_BUSY_WAIT	= 10000,
+	ATA_SHORT_PAUSE		= (HZ >> 6) + 1,
+
+	ATA_SHT_EMULATED	= 1,
+	ATA_SHT_CMD_PER_LUN	= 1,
+	ATA_SHT_THIS_ID		= -1,
+	ATA_SHT_USE_CLUSTERING	= 0,
+
+	/* struct ata_device stuff */
+	ATA_DFLAG_LBA48		= (1 << 0), /* device supports LBA48 */
+	ATA_DFLAG_PIO		= (1 << 1), /* device currently in PIO mode */
+	ATA_DFLAG_LOCK_SECTORS	= (1 << 2), /* don't adjust max_sectors */
+
+	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
+	ATA_DEV_ATA		= 1,	/* ATA device */
+	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
+	ATA_DEV_ATAPI		= 3,	/* ATAPI device */
+	ATA_DEV_ATAPI_UNSUP	= 4,	/* ATAPI device (unsupported) */
+	ATA_DEV_NONE		= 5,	/* no device */
+
+	/* struct ata_port flags */
+	ATA_FLAG_SLAVE_POSS	= (1 << 1), /* host supports slave dev */
+					    /* (doesn't imply presence) */
+	ATA_FLAG_PORT_DISABLED	= (1 << 2), /* port is disabled, ignore it */
+	ATA_FLAG_SATA		= (1 << 3),
+	ATA_FLAG_NO_LEGACY	= (1 << 4), /* no legacy mode check */
+	ATA_FLAG_SRST		= (1 << 5), /* use ATA SRST, not E.D.D. */
+	ATA_FLAG_MMIO		= (1 << 6), /* use MMIO, not PIO */
+	ATA_FLAG_SATA_RESET	= (1 << 7), /* use COMRESET */
+	ATA_FLAG_PIO_DMA	= (1 << 8), /* PIO cmds via DMA */
+
+	ATA_QCFLAG_ACTIVE	= (1 << 1), /* cmd not yet ack'd to scsi lyer */
+	ATA_QCFLAG_SG		= (1 << 3), /* have s/g table? */
+	ATA_QCFLAG_SINGLE	= (1 << 4), /* no s/g, just a single buffer */
+	ATA_QCFLAG_DMAMAP	= ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
+
+	/* various lengths of time */
+	ATA_TMOUT_EDD		= 5 * HZ,	/* hueristic */
+	ATA_TMOUT_PIO		= 30 * HZ,
+	ATA_TMOUT_BOOT		= 30 * HZ,	/* hueristic */
+	ATA_TMOUT_BOOT_QUICK	= 7 * HZ,	/* hueristic */
+	ATA_TMOUT_CDB		= 30 * HZ,
+	ATA_TMOUT_CDB_QUICK	= 5 * HZ,
+
+	/* ATA bus states */
+	BUS_UNKNOWN		= 0,
+	BUS_DMA			= 1,
+	BUS_IDLE		= 2,
+	BUS_NOINTR		= 3,
+	BUS_NODATA		= 4,
+	BUS_TIMER		= 5,
+	BUS_PIO			= 6,
+	BUS_EDD			= 7,
+	BUS_IDENTIFY		= 8,
+	BUS_PACKET		= 9,
+
+	/* SATA port states */
+	PORT_UNKNOWN		= 0,
+	PORT_ENABLED		= 1,
+	PORT_DISABLED		= 2,
+
+	/* encoding various smaller bitmaps into a single
+	 * unsigned long bitmap
+	 */
+	ATA_SHIFT_UDMA		= 0,
+	ATA_SHIFT_MWDMA		= 8,
+	ATA_SHIFT_PIO		= 11,
+};
+
+enum pio_task_states {
+	PIO_ST_UNKNOWN,
+	PIO_ST_IDLE,
+	PIO_ST_POLL,
+	PIO_ST_TMOUT,
+	PIO_ST,
+	PIO_ST_LAST,
+	PIO_ST_LAST_POLL,
+	PIO_ST_ERR,
+};
+
+/* forward declarations */
+struct scsi_device;
+struct ata_port_operations;
+struct ata_port;
+struct ata_queued_cmd;
+
+/* typedefs */
+typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc, u8 drv_stat);
+
+struct ata_ioports {
+	unsigned long		cmd_addr;
+	unsigned long		data_addr;
+	unsigned long		error_addr;
+	unsigned long		feature_addr;
+	unsigned long		nsect_addr;
+	unsigned long		lbal_addr;
+	unsigned long		lbam_addr;
+	unsigned long		lbah_addr;
+	unsigned long		device_addr;
+	unsigned long		status_addr;
+	unsigned long		command_addr;
+	unsigned long		altstatus_addr;
+	unsigned long		ctl_addr;
+	unsigned long		bmdma_addr;
+	unsigned long		scr_addr;
+};
+
+struct ata_probe_ent {
+	struct list_head	node;
+	struct device 		*dev;
+	struct ata_port_operations	*port_ops;
+	Scsi_Host_Template	*sht;
+	struct ata_ioports	port[ATA_MAX_PORTS];
+	unsigned int		n_ports;
+	unsigned int		hard_port_no;
+	unsigned int		pio_mask;
+	unsigned int		mwdma_mask;
+	unsigned int		udma_mask;
+	unsigned int		legacy_mode;
+	unsigned long		irq;
+	unsigned int		irq_flags;
+	unsigned long		host_flags;
+	void __iomem		*mmio_base;
+	void			*private_data;
+};
+
+struct ata_host_set {
+	spinlock_t		lock;
+	struct device 		*dev;
+	unsigned long		irq;
+	void __iomem		*mmio_base;
+	unsigned int		n_ports;
+	void			*private_data;
+	struct ata_port_operations *ops;
+	struct ata_port *	ports[0];
+};
+
+struct ata_queued_cmd {
+	struct ata_port		*ap;
+	struct ata_device	*dev;
+
+	struct scsi_cmnd	*scsicmd;
+	void			(*scsidone)(struct scsi_cmnd *);
+
+	struct ata_taskfile	tf;
+	u8			cdb[ATAPI_CDB_LEN];
+
+	unsigned long		flags;		/* ATA_QCFLAG_xxx */
+	unsigned int		tag;
+	unsigned int		n_elem;
+
+	int			dma_dir;
+
+	unsigned int		nsect;
+	unsigned int		cursect;
+
+	unsigned int		nbytes;
+	unsigned int		curbytes;
+
+	unsigned int		cursg;
+	unsigned int		cursg_ofs;
+
+	struct scatterlist	sgent;
+	void			*buf_virt;
+
+	struct scatterlist	*sg;
+
+	ata_qc_cb_t		complete_fn;
+
+	struct completion	*waiting;
+
+	void			*private_data;
+};
+
+struct ata_host_stats {
+	unsigned long		unhandled_irq;
+	unsigned long		idle_irq;
+	unsigned long		rw_reqbuf;
+};
+
+struct ata_device {
+	u64			n_sectors;	/* size of device, if ATA */
+	unsigned long		flags;		/* ATA_DFLAG_xxx */
+	unsigned int		class;		/* ATA_DEV_xxx */
+	unsigned int		devno;		/* 0 or 1 */
+	u16			id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+	u8			pio_mode;
+	u8			dma_mode;
+	u8			xfer_mode;
+	unsigned int		xfer_shift;	/* ATA_SHIFT_xxx */
+
+	/* cache info about current transfer mode */
+	u8			xfer_protocol;	/* taskfile xfer protocol */
+	u8			read_cmd;	/* opcode to use on read */
+	u8			write_cmd;	/* opcode to use on write */
+};
+
+struct ata_port {
+	struct Scsi_Host	*host;	/* our co-allocated scsi host */
+	struct ata_port_operations	*ops;
+	unsigned long		flags;	/* ATA_FLAG_xxx */
+	unsigned int		id;	/* unique id req'd by scsi midlyr */
+	unsigned int		port_no; /* unique port #; from zero */
+	unsigned int		hard_port_no;	/* hardware port #; from zero */
+
+	struct ata_prd		*prd;	 /* our SG list */
+	dma_addr_t		prd_dma; /* and its DMA mapping */
+
+	struct ata_ioports	ioaddr;	/* ATA cmd/ctl/dma register blocks */
+
+	u8			ctl;	/* cache of ATA control register */
+	u8			last_ctl;	/* Cache last written value */
+	unsigned int		bus_state;
+	unsigned int		port_state;
+	unsigned int		pio_mask;
+	unsigned int		mwdma_mask;
+	unsigned int		udma_mask;
+	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
+	unsigned int		cdb_len;
+
+	struct ata_device	device[ATA_MAX_DEVICES];
+
+	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
+	unsigned long		qactive;
+	unsigned int		active_tag;
+
+	struct ata_host_stats	stats;
+	struct ata_host_set	*host_set;
+
+	struct work_struct	packet_task;
+
+	struct work_struct	pio_task;
+	unsigned int		pio_task_state;
+	unsigned long		pio_task_timeout;
+
+	void			*private_data;
+};
+
+struct ata_port_operations {
+	void (*port_disable) (struct ata_port *);
+
+	void (*dev_config) (struct ata_port *, struct ata_device *);
+
+	void (*set_piomode) (struct ata_port *, struct ata_device *);
+	void (*set_dmamode) (struct ata_port *, struct ata_device *);
+
+	void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+	void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+
+	void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+	u8   (*check_status)(struct ata_port *ap);
+	u8   (*check_altstatus)(struct ata_port *ap);
+	u8   (*check_err)(struct ata_port *ap);
+	void (*dev_select)(struct ata_port *ap, unsigned int device);
+
+	void (*phy_reset) (struct ata_port *ap);
+	void (*post_set_mode) (struct ata_port *ap);
+
+	int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+
+	void (*bmdma_setup) (struct ata_queued_cmd *qc);
+	void (*bmdma_start) (struct ata_queued_cmd *qc);
+
+	void (*qc_prep) (struct ata_queued_cmd *qc);
+	int (*qc_issue) (struct ata_queued_cmd *qc);
+
+	void (*eng_timeout) (struct ata_port *ap);
+
+	irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
+	void (*irq_clear) (struct ata_port *);
+
+	u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
+	void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
+			   u32 val);
+
+	int (*port_start) (struct ata_port *ap);
+	void (*port_stop) (struct ata_port *ap);
+
+	void (*host_stop) (struct ata_host_set *host_set);
+
+	void (*bmdma_stop) (struct ata_port *ap);
+	u8   (*bmdma_status) (struct ata_port *ap);
+};
+
+struct ata_port_info {
+	Scsi_Host_Template	*sht;
+	unsigned long		host_flags;
+	unsigned long		pio_mask;
+	unsigned long		mwdma_mask;
+	unsigned long		udma_mask;
+	struct ata_port_operations	*port_ops;
+};
+
+
+extern void ata_port_probe(struct ata_port *);
+extern void __sata_phy_reset(struct ata_port *ap);
+extern void sata_phy_reset(struct ata_port *ap);
+extern void ata_bus_reset(struct ata_port *ap);
+extern void ata_port_disable(struct ata_port *);
+extern void ata_std_ports(struct ata_ioports *ioaddr);
+#ifdef CONFIG_PCI
+extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
+			     unsigned int n_ports);
+extern void ata_pci_remove_one (struct pci_dev *pdev);
+#endif /* CONFIG_PCI */
+extern int ata_device_add(struct ata_probe_ent *ent);
+extern int ata_scsi_detect(Scsi_Host_Template *sht);
+extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
+extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_scsi_error(struct Scsi_Host *host);
+extern int ata_scsi_release(struct Scsi_Host *host);
+extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+/*
+ * Default driver ops implementations
+ */
+extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp);
+extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf);
+extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
+extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
+extern u8 ata_check_status(struct ata_port *ap);
+extern u8 ata_altstatus(struct ata_port *ap);
+extern u8 ata_chk_err(struct ata_port *ap);
+extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
+extern int ata_port_start (struct ata_port *ap);
+extern void ata_port_stop (struct ata_port *ap);
+extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+extern void ata_qc_prep(struct ata_queued_cmd *qc);
+extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
+extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf,
+		unsigned int buflen);
+extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
+		 unsigned int n_elem);
+extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
+extern void ata_dev_id_string(u16 *id, unsigned char *s,
+			      unsigned int ofs, unsigned int len);
+extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
+extern void ata_bmdma_start (struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_port *ap);
+extern u8   ata_bmdma_status(struct ata_port *ap);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
+extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
+extern void ata_eng_timeout(struct ata_port *ap);
+extern void ata_scsi_simulate(u16 *id, struct scsi_cmnd *cmd,
+			      void (*done)(struct scsi_cmnd *));
+extern int ata_std_bios_param(struct scsi_device *sdev,
+			      struct block_device *bdev,
+			      sector_t capacity, int geom[]);
+extern int ata_scsi_slave_config(struct scsi_device *sdev);
+
+
+#ifdef CONFIG_PCI
+struct pci_bits {
+	unsigned int		reg;	/* PCI config register to read */
+	unsigned int		width;	/* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
+	unsigned long		mask;
+	unsigned long		val;
+};
+
+extern struct ata_probe_ent *
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
+extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
+
+#endif /* CONFIG_PCI */
+
+
+static inline unsigned int ata_tag_valid(unsigned int tag)
+{
+	return (tag < ATA_MAX_QUEUE) ? 1 : 0;
+}
+
+static inline unsigned int ata_dev_present(struct ata_device *dev)
+{
+	return ((dev->class == ATA_DEV_ATA) ||
+		(dev->class == ATA_DEV_ATAPI));
+}
+
+static inline u8 ata_chk_status(struct ata_port *ap)
+{
+	return ap->ops->check_status(ap);
+}
+
+static inline void ata_pause(struct ata_port *ap)
+{
+	ata_altstatus(ap);
+	ndelay(400);
+}
+
+static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
+			       unsigned int max)
+{
+	u8 status;
+
+	do {
+		udelay(10);
+		status = ata_chk_status(ap);
+		max--;
+	} while ((status & bits) && (max > 0));
+
+	return status;
+}
+
+static inline u8 ata_wait_idle(struct ata_port *ap)
+{
+	u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+
+	if (status & (ATA_BUSY | ATA_DRQ)) {
+		unsigned long l = ap->ioaddr.status_addr;
+		printk(KERN_WARNING
+		       "ATA: abnormal status 0x%X on port 0x%lX\n",
+		       status, l);
+	}
+
+	return status;
+}
+
+static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
+{
+	qc->tf.ctl |= ATA_NIEN;
+}
+
+static inline struct ata_queued_cmd *ata_qc_from_tag (struct ata_port *ap,
+						      unsigned int tag)
+{
+	if (likely(ata_tag_valid(tag)))
+		return &ap->qcmd[tag];
+	return NULL;
+}
+
+static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, unsigned int device)
+{
+	memset(tf, 0, sizeof(*tf));
+
+	tf->ctl = ap->ctl;
+	if (device == 0)
+		tf->device = ATA_DEVICE_OBS;
+	else
+		tf->device = ATA_DEVICE_OBS | ATA_DEV1;
+}
+
+static inline u8 ata_irq_on(struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 tmp;
+
+	ap->ctl &= ~ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	if (ap->flags & ATA_FLAG_MMIO)
+		writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
+	else
+		outb(ap->ctl, ioaddr->ctl_addr);
+	tmp = ata_wait_idle(ap);
+
+	ap->ops->irq_clear(ap);
+
+	return tmp;
+}
+
+static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
+{
+	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+	u8 host_stat, post_stat, status;
+
+	status = ata_busy_wait(ap, bits, 1000);
+	if (status & bits)
+		DPRINTK("abnormal status 0x%X\n", status);
+
+	/* get controller status; clear intr, err bits */
+	if (ap->flags & ATA_FLAG_MMIO) {
+		void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+		host_stat = readb(mmio + ATA_DMA_STATUS);
+		writeb(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
+		       mmio + ATA_DMA_STATUS);
+
+		post_stat = readb(mmio + ATA_DMA_STATUS);
+	} else {
+		host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+		outb(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
+		     ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+
+		post_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	}
+
+	VPRINTK("irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+		host_stat, post_stat, status);
+
+	return status;
+}
+
+static inline u32 scr_read(struct ata_port *ap, unsigned int reg)
+{
+	return ap->ops->scr_read(ap, reg);
+}
+
+static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val)
+{
+	ap->ops->scr_write(ap, reg, val);
+}
+
+static inline unsigned int sata_dev_present(struct ata_port *ap)
+{
+	return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
+}
+
+static inline int ata_try_flush_cache(struct ata_device *dev)
+{
+	return ata_id_wcache_enabled(dev->id) ||
+	       ata_id_has_flush(dev->id) ||
+	       ata_id_has_flush_ext(dev->id);
+}
+
+#endif /* __LINUX_LIBATA_H__ */
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
new file mode 100644
index 000000000000..923bdbc6d9e4
--- /dev/null
+++ b/include/linux/libps2.h
@@ -0,0 +1,50 @@
+#ifndef _LIBPS2_H
+#define _LIBPS2_H
+
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+ * Copyright (C) 2004 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+
+#define PS2_CMD_GETID		0x02f2
+#define PS2_CMD_RESET_BAT	0x02ff
+
+#define PS2_RET_BAT		0xaa
+#define PS2_RET_ID		0x00
+#define PS2_RET_ACK		0xfa
+#define PS2_RET_NAK		0xfe
+
+#define PS2_FLAG_ACK		1	/* Waiting for ACK/NAK */
+#define PS2_FLAG_CMD		2	/* Waiting for command to finish */
+#define PS2_FLAG_CMD1		4	/* Waiting for the first byte of command response */
+#define PS2_FLAG_WAITID		8	/* Command execiting is GET ID */
+
+struct ps2dev {
+	struct serio *serio;
+
+	/* Ensures that only one command is executing at a time */
+	struct semaphore cmd_sem;
+
+	/* Used to signal completion from interrupt handler */
+	wait_queue_head_t wait;
+
+	unsigned long flags;
+	unsigned char cmdbuf[6];
+	unsigned char cmdcnt;
+	unsigned char nak;
+};
+
+void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
+int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
+int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
+int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command);
+int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
+int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data);
+void ps2_cmd_aborted(struct ps2dev *ps2dev);
+
+#endif /* _LIBPS2_H */
diff --git a/include/linux/limits.h b/include/linux/limits.h
new file mode 100644
index 000000000000..eaf2e099f125
--- /dev/null
+++ b/include/linux/limits.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_LIMITS_H
+#define _LINUX_LIMITS_H
+
+#define NR_OPEN	        1024
+
+#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
+#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
+#define CHILD_MAX        999    /* no limit :-) */
+#define OPEN_MAX         256	/* # open files a process may have */
+#define LINK_MAX         127	/* # links a file may have */
+#define MAX_CANON        255	/* size of the canonical input queue */
+#define MAX_INPUT        255	/* size of the type-ahead buffer */
+#define NAME_MAX         255	/* # chars in a file name */
+#define PATH_MAX        4096	/* # chars in a path name including nul */
+#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
+#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
+#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
+#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
+
+#define RTSIG_MAX	  32
+
+#endif
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
new file mode 100644
index 000000000000..338f7795d8a0
--- /dev/null
+++ b/include/linux/linkage.h
@@ -0,0 +1,47 @@
+#ifndef _LINUX_LINKAGE_H
+#define _LINUX_LINKAGE_H
+
+#include <linux/config.h>
+#include <asm/linkage.h>
+
+#ifdef __cplusplus
+#define CPP_ASMLINKAGE extern "C"
+#else
+#define CPP_ASMLINKAGE
+#endif
+
+#ifndef asmlinkage
+#define asmlinkage CPP_ASMLINKAGE
+#endif
+
+#ifndef prevent_tail_call
+# define prevent_tail_call(ret) do { } while (0)
+#endif
+
+#ifndef __ALIGN
+#define __ALIGN		.align 4,0x90
+#define __ALIGN_STR	".align 4,0x90"
+#endif
+
+#ifdef __ASSEMBLY__
+
+#define ALIGN __ALIGN
+#define ALIGN_STR __ALIGN_STR
+
+#define ENTRY(name) \
+  .globl name; \
+  ALIGN; \
+  name:
+
+#endif
+
+#define NORET_TYPE    /**/
+#define ATTRIB_NORET  __attribute__((noreturn))
+#define NORET_AND     noreturn,
+
+#ifndef FASTCALL
+#define FASTCALL(x)	x
+#define fastcall
+#endif
+
+#endif
diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h
new file mode 100644
index 000000000000..9c01bde5bf1b
--- /dev/null
+++ b/include/linux/linux_logo.h
@@ -0,0 +1,37 @@
+#ifndef _LINUX_LINUX_LOGO_H
+#define _LINUX_LINUX_LOGO_H
+
+/*
+ *  Linux logo to be displayed on boot
+ *
+ *  Copyright (C) 1996 Larry Ewing (lewing@isc.tamu.edu)
+ *  Copyright (C) 1996,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *  Copyright (C) 2001 Greg Banks <gnb@alphalink.com.au>
+ *  Copyright (C) 2001 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ *  Copyright (C) 2003 Geert Uytterhoeven <geert@linux-m68k.org>
+ *
+ *  Serial_console ascii image can be any size,
+ *  but should contain %s to display the version
+ */
+
+#include <linux/init.h>
+
+
+#define LINUX_LOGO_MONO		1	/* monochrome black/white */
+#define LINUX_LOGO_VGA16	2	/* 16 colors VGA text palette */
+#define LINUX_LOGO_CLUT224	3	/* 224 colors */
+#define LINUX_LOGO_GRAY256	4	/* 256 levels grayscale */
+
+
+struct linux_logo {
+	int type;			/* one of LINUX_LOGO_* */
+	unsigned int width;
+	unsigned int height;
+	unsigned int clutsize;		/* LINUX_LOGO_CLUT224 only */
+	const unsigned char *clut;	/* LINUX_LOGO_CLUT224 only */
+	const unsigned char *data;
+};
+
+extern const struct linux_logo *fb_find_logo(int depth);
+
+#endif /* _LINUX_LINUX_LOGO_H */
diff --git a/include/linux/list.h b/include/linux/list.h
new file mode 100644
index 000000000000..dd7cd54fa831
--- /dev/null
+++ b/include/linux/list.h
@@ -0,0 +1,707 @@
+#ifndef _LINUX_LIST_H
+#define _LINUX_LIST_H
+
+#ifdef __KERNEL__
+
+#include <linux/stddef.h>
+#include <linux/prefetch.h>
+#include <asm/system.h>
+
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized list entries.
+ */
+#define LIST_POISON1  ((void *) 0x00100100)
+#define LIST_POISON2  ((void *) 0x00200200)
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+#define INIT_LIST_HEAD(ptr) do { \
+	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add_rcu(struct list_head * new,
+		struct list_head * prev, struct list_head * next)
+{
+	new->next = next;
+	new->prev = prev;
+	smp_wmb();
+	next->prev = new;
+	prev->next = new;
+}
+
+/**
+ * list_add_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_rcu(struct list_head *new, struct list_head *head)
+{
+	__list_add_rcu(new, head, head->next);
+}
+
+/**
+ * list_add_tail_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_tail_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_tail_rcu(struct list_head *new,
+					struct list_head *head)
+{
+	__list_add_rcu(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_del_rcu - deletes entry from list without re-initialization
+ * @entry: the element to delete from the list.
+ *
+ * Note: list_empty on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_del_rcu()
+ * or list_add_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ *
+ * Note that the caller is not permitted to immediately free
+ * the newly deleted entry.  Instead, either synchronize_kernel()
+ * or call_rcu() must be used to defer freeing until an RCU
+ * grace period has elapsed.
+ */
+static inline void list_del_rcu(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->prev = LIST_POISON2;
+}
+
+/*
+ * list_replace_rcu - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * The old entry will be replaced with the new entry atomically.
+ */
+static inline void list_replace_rcu(struct list_head *old, struct list_head *new){
+	new->next = old->next;
+	new->prev = old->prev;
+	smp_wmb();
+	new->next->prev = new;
+	new->prev->next = new;
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+        __list_del(list->prev, list->next);
+        list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+				  struct list_head *head)
+{
+        __list_del(list->prev, list->next);
+        list_add_tail(list, head);
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+	return head->next == head;
+}
+
+/**
+ * list_empty_careful - tests whether a list is
+ * empty _and_ checks that no other CPU might be
+ * in the process of still modifying either member
+ *
+ * NOTE: using list_empty_careful() without synchronization
+ * can only be safe if the only activity that can happen
+ * to the list entry is list_del_init(). Eg. it cannot be used
+ * if another CPU could re-list_add() it.
+ *
+ * @head: the list to test.
+ */
+static inline int list_empty_careful(const struct list_head *head)
+{
+	struct list_head *next = head->next;
+	return (next == head) && (next == head->prev);
+}
+
+static inline void __list_splice(struct list_head *list,
+				 struct list_head *head)
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+	struct list_head *at = head->next;
+
+	first->prev = head;
+	head->next = first;
+
+	last->next = at;
+	at->prev = last;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(struct list_head *list, struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+				    struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
+        	pos = pos->next)
+
+/**
+ * __list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ *
+ * This variant differs from list_for_each() in that it's the
+ * simplest possible list iteration code, no prefetching is done.
+ * Use this for code that knows the list to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev	-	iterate over a list backwards
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+	for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
+        	pos = pos->prev)
+
+/**
+ * list_for_each_safe	-	iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/**
+ * list_for_each_entry	-	iterate over list of given type
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     prefetch(pos->member.next), &pos->member != (head); 	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head); 	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_prepare_entry - prepare a pos entry for use as a start point in
+ *			list_for_each_entry_continue
+ * @pos:	the type * to use as a start point
+ * @head:	the head of the list
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_prepare_entry(pos, head, member) \
+	((pos) ? : list_entry(head, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue -	iterate over list of given type
+ *			continuing after existing point
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_continue(pos, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
+	     prefetch(pos->member.next), &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos:	the type * to use as a loop counter.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member)			\
+	for (pos = list_entry((head)->next, typeof(*pos), member),	\
+		n = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_rcu	-	iterate over an rcu-protected list
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_rcu(pos, head) \
+	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
+        	pos = rcu_dereference(pos->next))
+
+#define __list_for_each_rcu(pos, head) \
+	for (pos = (head)->next; pos != (head); \
+        	pos = rcu_dereference(pos->next))
+
+/**
+ * list_for_each_safe_rcu	-	iterate over an rcu-protected list safe
+ *					against removal of list entry
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_safe_rcu(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = rcu_dereference(n), n = pos->next)
+
+/**
+ * list_for_each_entry_rcu	-	iterate over rcu list of given type
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_entry_rcu(pos, head, member)			\
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     prefetch(pos->member.next), &pos->member != (head); 	\
+	     pos = rcu_dereference(list_entry(pos->member.next, 	\
+					typeof(*pos), member)))
+
+
+/**
+ * list_for_each_continue_rcu	-	iterate over an rcu-protected list
+ *			continuing after existing point.
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_continue_rcu(pos, head) \
+	for ((pos) = (pos)->next; prefetch((pos)->next), (pos) != (head); \
+        	(pos) = rcu_dereference((pos)->next))
+
+/*
+ * Double linked lists with a single pointer list head.
+ * Mostly useful for hash tables where the two pointer list head is
+ * too wasteful.
+ * You lose the ability to access the tail in O(1).
+ */
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+#define INIT_HLIST_NODE(ptr) ((ptr)->next = NULL, (ptr)->pprev = NULL)
+
+static inline int hlist_unhashed(const struct hlist_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+	return !h->first;
+}
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+	struct hlist_node *next = n->next;
+	struct hlist_node **pprev = n->pprev;
+	*pprev = next;
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry().
+ */
+static inline void hlist_del_rcu(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_del_init(struct hlist_node *n)
+{
+	if (n->pprev)  {
+		__hlist_del(n);
+		INIT_HLIST_NODE(n);
+	}
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+	n->pprev = &h->first;
+}
+
+
+/**
+ * hlist_add_head_rcu - adds the specified element to the specified hlist,
+ * while permitting racing traversals.
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_add_head_rcu(struct hlist_node *n,
+					struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	n->pprev = &h->first;
+	smp_wmb();
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+}
+
+/* next must be != NULL */
+static inline void hlist_add_before(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	next->pprev = &n->next;
+	*(n->pprev) = n;
+}
+
+static inline void hlist_add_after(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	next->next = n->next;
+	n->next = next;
+	next->pprev = &n->next;
+
+	if(next->next)
+		next->next->pprev  = &next->next;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each(pos, head) \
+	for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \
+	     pos = pos->next)
+
+#define hlist_for_each_safe(pos, n, head) \
+	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
+	     pos = n)
+
+#define hlist_for_each_rcu(pos, head) \
+	for ((pos) = (head)->first; pos && ({ prefetch((pos)->next); 1; }); \
+		(pos) = rcu_dereference((pos)->next))
+
+/**
+ * hlist_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop counter.
+ * @pos:	the &struct hlist_node to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry(tpos, pos, head, member)			 \
+	for (pos = (head)->first;					 \
+	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_continue - iterate over a hlist continuing after existing point
+ * @tpos:	the type * to use as a loop counter.
+ * @pos:	the &struct hlist_node to use as a loop counter.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue(tpos, pos, member)		 \
+	for (pos = (pos)->next;						 \
+	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_from - iterate over a hlist continuing from existing point
+ * @tpos:	the type * to use as a loop counter.
+ * @pos:	the &struct hlist_node to use as a loop counter.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_from(tpos, pos, member)			 \
+	for (; pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop counter.
+ * @pos:	the &struct hlist_node to use as a loop counter.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
+	for (pos = (head)->first;					 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
+
+/**
+ * hlist_for_each_entry_rcu - iterate over rcu list of given type
+ * @pos:	the type * to use as a loop counter.
+ * @pos:	the &struct hlist_node to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as hlist_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define hlist_for_each_entry_rcu(tpos, pos, head, member)		 \
+	for (pos = (head)->first;					 \
+	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = rcu_dereference(pos->next))
+
+#else
+#warning "don't include kernel headers in userspace"
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
new file mode 100644
index 000000000000..09f2e6d0e9eb
--- /dev/null
+++ b/include/linux/llc.h
@@ -0,0 +1,80 @@
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+	sa_family_t     sllc_family;	/* AF_LLC */
+	sa_family_t	sllc_arphrd;	/* ARPHRD_ETHER */
+	unsigned char   sllc_test;
+	unsigned char   sllc_xid;
+	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
+	unsigned char   sllc_sap;
+	unsigned char   sllc_mac[IFHWADDRLEN];
+	unsigned char   __pad[__LLC_SOCK_SIZE__ - sizeof(sa_family_t) * 2 -
+			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+	LLC_OPT_UNKNOWN = 0,
+	LLC_OPT_RETRY,		/* max retrans attempts. */
+	LLC_OPT_SIZE,		/* max PDU size (octets). */
+	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
+	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
+	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
+	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
+	LLC_OPT_TX_WIN,		/* tx window size. */
+	LLC_OPT_RX_WIN,		/* rx window size. */
+	LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY	 100
+#define LLC_OPT_MAX_SIZE	4196
+#define LLC_OPT_MAX_WIN		 127
+#define LLC_OPT_MAX_ACK_TMR_EXP	  60
+#define LLC_OPT_MAX_P_TMR_EXP	  60
+#define LLC_OPT_MAX_REJ_TMR_EXP	  60
+#define LLC_OPT_MAX_BUSY_TMR_EXP  60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Managment. 	*/
+#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
+#define LLC_SAP_PNM	0x0E		/* Proway Network Managment.	*/	
+#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
+#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
+#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
+#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
+#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
+#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
+#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
+#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
+#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
+#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
+#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
+#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
+#define LLC_SAP_DISC	0xFC		/* Discovery			*/
+#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
+#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
+#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
+#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
+
+#ifdef __KERNEL__
+#define LLC_SAP_DYN_START	0xC0
+#define LLC_SAP_DYN_STOP	0xDE
+#define LLC_SAP_DYN_TRIES	4
+
+#define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
+#endif /* __KERNEL__ */
+#endif /* __LINUX_LLC_H */
diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h
new file mode 100644
index 000000000000..b054debef2e0
--- /dev/null
+++ b/include/linux/lockd/bind.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/linux/lockd/bind.h
+ *
+ * This is the part of lockd visible to nfsd and the nfs client.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_BIND_H
+#define LINUX_LOCKD_BIND_H
+
+#include <linux/lockd/nlm.h>
+
+/* Dummy declarations */
+struct svc_rqst;
+
+/*
+ * This is the set of functions for lockd->nfsd communication
+ */
+struct nlmsvc_binding {
+	u32			(*fopen)(struct svc_rqst *,
+						struct nfs_fh *,
+						struct file **);
+	void			(*fclose)(struct file *);
+};
+
+extern struct nlmsvc_binding *	nlmsvc_ops;
+
+/*
+ * Functions exported by the lockd module
+ */
+extern int	nlmclnt_proc(struct inode *, int, struct file_lock *);
+extern int	lockd_up(void);
+extern void	lockd_down(void);
+
+#endif /* LINUX_LOCKD_BIND_H */
diff --git a/include/linux/lockd/debug.h b/include/linux/lockd/debug.h
new file mode 100644
index 000000000000..34b2b7f33c3b
--- /dev/null
+++ b/include/linux/lockd/debug.h
@@ -0,0 +1,57 @@
+/*
+ * linux/include/linux/lockd/debug.h
+ *
+ * Debugging stuff.
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_DEBUG_H
+#define LINUX_LOCKD_DEBUG_H
+
+#ifdef __KERNEL__
+
+#include <linux/sunrpc/debug.h>
+
+/*
+ * Enable lockd debugging.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define LOCKD_DEBUG		1
+#endif
+
+#undef ifdebug
+#if defined(RPC_DEBUG) && defined(LOCKD_DEBUG)
+# define ifdebug(flag)		if (unlikely(nlm_debug & NLMDBG_##flag))
+#else
+# define ifdebug(flag)		if (0)
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * Debug flags
+ */
+#define NLMDBG_SVC		0x0001
+#define NLMDBG_CLIENT		0x0002
+#define NLMDBG_CLNTLOCK		0x0004
+#define NLMDBG_SVCLOCK		0x0008
+#define NLMDBG_MONITOR		0x0010
+#define NLMDBG_CLNTSUBS		0x0020
+#define NLMDBG_SVCSUBS		0x0040
+#define NLMDBG_HOSTCACHE	0x0080
+#define NLMDBG_XDR		0x0100
+#define NLMDBG_ALL		0x7fff
+
+
+/*
+ * Support for printing NLM cookies in dprintk()
+ */
+#ifdef RPC_DEBUG
+struct nlm_cookie;
+/* Call this function with the BKL held (it uses a static buffer) */
+extern const char *nlmdbg_cookie2a(const struct nlm_cookie *);
+#endif
+
+#endif /* LINUX_LOCKD_DEBUG_H */
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
new file mode 100644
index 000000000000..0d9d22578212
--- /dev/null
+++ b/include/linux/lockd/lockd.h
@@ -0,0 +1,224 @@
+/*
+ * linux/include/linux/lockd/lockd.h
+ *
+ * General-purpose lockd include file.
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_LOCKD_H
+#define LINUX_LOCKD_LOCKD_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/in.h>
+#include <linux/fs.h>
+#include <linux/utsname.h>
+#include <linux/nfsd/nfsfh.h>
+#include <linux/lockd/bind.h>
+#include <linux/lockd/xdr.h>
+#ifdef CONFIG_LOCKD_V4
+#include <linux/lockd/xdr4.h>
+#endif
+#include <linux/lockd/debug.h>
+
+/*
+ * Version string
+ */
+#define LOCKD_VERSION		"0.5"
+
+/*
+ * Default timeout for RPC calls (seconds)
+ */
+#define LOCKD_DFLT_TIMEO	10
+
+/*
+ * Lockd host handle (used both by the client and server personality).
+ */
+struct nlm_host {
+	struct nlm_host *	h_next;		/* linked list (hash table) */
+	struct sockaddr_in	h_addr;		/* peer address */
+	struct rpc_clnt	*	h_rpcclnt;	/* RPC client to talk to peer */
+	char			h_name[20];	/* remote hostname */
+	u32			h_version;	/* interface version */
+	unsigned short		h_proto;	/* transport proto */
+	unsigned short		h_reclaiming : 1,
+				h_server     : 1, /* server side, not client side */
+				h_inuse      : 1,
+				h_killed     : 1,
+				h_monitored  : 1;
+	wait_queue_head_t	h_gracewait;	/* wait while reclaiming */
+	u32			h_state;	/* pseudo-state counter */
+	u32			h_nsmstate;	/* true remote NSM state */
+	u32			h_pidcount;	/* Pseudopids */
+	atomic_t		h_count;	/* reference count */
+	struct semaphore	h_sema;		/* mutex for pmap binding */
+	unsigned long		h_nextrebind;	/* next portmap call */
+	unsigned long		h_expires;	/* eligible for GC */
+	struct list_head	h_lockowners;	/* Lockowners for the client */
+	spinlock_t		h_lock;
+};
+
+/*
+ * Map an fl_owner_t into a unique 32-bit "pid"
+ */
+struct nlm_lockowner {
+	struct list_head list;
+	atomic_t count;
+
+	struct nlm_host *host;
+	fl_owner_t owner;
+	uint32_t pid;
+};
+
+/*
+ * Memory chunk for NLM client RPC request.
+ */
+#define NLMCLNT_OHSIZE		(sizeof(system_utsname.nodename)+10)
+struct nlm_rqst {
+	unsigned int		a_flags;	/* initial RPC task flags */
+	struct nlm_host *	a_host;		/* host handle */
+	struct nlm_args		a_args;		/* arguments */
+	struct nlm_res		a_res;		/* result */
+	char			a_owner[NLMCLNT_OHSIZE];
+};
+
+/*
+ * This struct describes a file held open by lockd on behalf of
+ * an NFS client.
+ */
+struct nlm_file {
+	struct nlm_file *	f_next;		/* linked list */
+	struct nfs_fh		f_handle;	/* NFS file handle */
+	struct file *		f_file;		/* VFS file pointer */
+	struct nlm_share *	f_shares;	/* DOS shares */
+	struct nlm_block *	f_blocks;	/* blocked locks */
+	unsigned int		f_locks;	/* guesstimate # of locks */
+	unsigned int		f_count;	/* reference count */
+	struct semaphore	f_sema;		/* avoid concurrent access */
+	int		       	f_hash;		/* hash of f_handle */
+};
+
+/*
+ * This is a server block (i.e. a lock requested by some client which
+ * couldn't be granted because of a conflicting lock).
+ */
+#define NLM_NEVER		(~(unsigned long) 0)
+struct nlm_block {
+	struct nlm_block *	b_next;		/* linked list (all blocks) */
+	struct nlm_block *	b_fnext;	/* linked list (per file) */
+	struct nlm_rqst		b_call;		/* RPC args & callback info */
+	struct svc_serv *	b_daemon;	/* NLM service */
+	struct nlm_host *	b_host;		/* host handle for RPC clnt */
+	unsigned long		b_when;		/* next re-xmit */
+	unsigned int		b_id;		/* block id */
+	unsigned char		b_queued;	/* re-queued */
+	unsigned char		b_granted;	/* VFS granted lock */
+	unsigned char		b_incall;	/* doing callback */
+	unsigned char		b_done;		/* callback complete */
+	struct nlm_file *	b_file;		/* file in question */
+};
+
+/*
+ * Valid actions for nlmsvc_traverse_files
+ */
+#define NLM_ACT_CHECK		0		/* check for locks */
+#define NLM_ACT_MARK		1		/* mark & sweep */
+#define NLM_ACT_UNLOCK		2		/* release all locks */
+
+/*
+ * Global variables
+ */
+extern struct rpc_program	nlm_program;
+extern struct svc_procedure	nlmsvc_procedures[];
+#ifdef CONFIG_LOCKD_V4
+extern struct svc_procedure	nlmsvc_procedures4[];
+#endif
+extern int			nlmsvc_grace_period;
+extern unsigned long		nlmsvc_timeout;
+
+/*
+ * Lockd client functions
+ */
+struct nlm_rqst * nlmclnt_alloc_call(void);
+int		  nlmclnt_block(struct nlm_host *, struct file_lock *, u32 *);
+int		  nlmclnt_cancel(struct nlm_host *, struct file_lock *);
+u32		  nlmclnt_grant(struct nlm_lock *);
+void		  nlmclnt_recovery(struct nlm_host *, u32);
+int		  nlmclnt_reclaim(struct nlm_host *, struct file_lock *);
+int		  nlmclnt_setgrantargs(struct nlm_rqst *, struct nlm_lock *);
+void		  nlmclnt_freegrantargs(struct nlm_rqst *);
+
+/*
+ * Host cache
+ */
+struct nlm_host * nlmclnt_lookup_host(struct sockaddr_in *, int, int);
+struct nlm_host * nlmsvc_lookup_host(struct svc_rqst *);
+struct nlm_host * nlm_lookup_host(int server, struct sockaddr_in *, int, int);
+struct rpc_clnt * nlm_bind_host(struct nlm_host *);
+void		  nlm_rebind_host(struct nlm_host *);
+struct nlm_host * nlm_get_host(struct nlm_host *);
+void		  nlm_release_host(struct nlm_host *);
+void		  nlm_shutdown_hosts(void);
+extern struct nlm_host *nlm_find_client(void);
+
+
+/*
+ * Server-side lock handling
+ */
+int		  nlmsvc_async_call(struct nlm_rqst *, u32, rpc_action);
+u32		  nlmsvc_lock(struct svc_rqst *, struct nlm_file *,
+					struct nlm_lock *, int, struct nlm_cookie *);
+u32		  nlmsvc_unlock(struct nlm_file *, struct nlm_lock *);
+u32		  nlmsvc_testlock(struct nlm_file *, struct nlm_lock *,
+					struct nlm_lock *);
+u32		  nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *);
+unsigned long	  nlmsvc_retry_blocked(void);
+int		  nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *,
+					int action);
+void	  nlmsvc_grant_reply(struct svc_rqst *, struct nlm_cookie *, u32);
+
+/*
+ * File handling for the server personality
+ */
+u32		  nlm_lookup_file(struct svc_rqst *, struct nlm_file **,
+					struct nfs_fh *);
+void		  nlm_release_file(struct nlm_file *);
+void		  nlmsvc_mark_resources(void);
+void		  nlmsvc_free_host_resources(struct nlm_host *);
+void		  nlmsvc_invalidate_all(void);
+
+static __inline__ struct inode *
+nlmsvc_file_inode(struct nlm_file *file)
+{
+	return file->f_file->f_dentry->d_inode;
+}
+
+/*
+ * Compare two host addresses (needs modifying for ipv6)
+ */
+static __inline__ int
+nlm_cmp_addr(struct sockaddr_in *sin1, struct sockaddr_in *sin2)
+{
+	return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
+}
+
+/*
+ * Compare two NLM locks.
+ * When the second lock is of type F_UNLCK, this acts like a wildcard.
+ */
+static __inline__ int
+nlm_compare_locks(struct file_lock *fl1, struct file_lock *fl2)
+{
+	return	fl1->fl_pid   == fl2->fl_pid
+	     && fl1->fl_start == fl2->fl_start
+	     && fl1->fl_end   == fl2->fl_end
+	     &&(fl1->fl_type  == fl2->fl_type || fl2->fl_type == F_UNLCK);
+}
+
+extern struct lock_manager_operations nlmsvc_lock_operations;
+
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_LOCKD_LOCKD_H */
diff --git a/include/linux/lockd/nlm.h b/include/linux/lockd/nlm.h
new file mode 100644
index 000000000000..869b630cba24
--- /dev/null
+++ b/include/linux/lockd/nlm.h
@@ -0,0 +1,58 @@
+/*
+ * linux/include/linux/lockd/nlm.h
+ *
+ * Declarations for the Network Lock Manager protocol.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_NLM_H
+#define LINUX_LOCKD_NLM_H
+
+#include <linux/config.h>
+
+/* Maximum file offset in file_lock.fl_end */
+# define NLM_OFFSET_MAX		((s32) 0x7fffffff)
+# define NLM4_OFFSET_MAX	((s64) ((~(u64)0) >> 1))
+
+/* Return states for NLM */
+enum {
+	NLM_LCK_GRANTED			= 0,
+	NLM_LCK_DENIED			= 1,
+	NLM_LCK_DENIED_NOLOCKS		= 2,
+	NLM_LCK_BLOCKED			= 3,
+	NLM_LCK_DENIED_GRACE_PERIOD	= 4,
+#ifdef CONFIG_LOCKD_V4
+	NLM_DEADLCK			= 5,
+	NLM_ROFS			= 6,
+	NLM_STALE_FH			= 7,
+	NLM_FBIG			= 8,
+	NLM_FAILED			= 9,
+#endif
+};
+
+#define NLM_PROGRAM		100021
+
+#define NLMPROC_NULL		0
+#define NLMPROC_TEST		1
+#define NLMPROC_LOCK		2
+#define NLMPROC_CANCEL		3
+#define NLMPROC_UNLOCK		4
+#define NLMPROC_GRANTED		5
+#define NLMPROC_TEST_MSG	6
+#define NLMPROC_LOCK_MSG	7
+#define NLMPROC_CANCEL_MSG	8
+#define NLMPROC_UNLOCK_MSG	9
+#define NLMPROC_GRANTED_MSG	10
+#define NLMPROC_TEST_RES	11
+#define NLMPROC_LOCK_RES	12
+#define NLMPROC_CANCEL_RES	13
+#define NLMPROC_UNLOCK_RES	14
+#define NLMPROC_GRANTED_RES	15
+#define NLMPROC_NSM_NOTIFY	16		/* statd callback */
+#define NLMPROC_SHARE		20
+#define NLMPROC_UNSHARE		21
+#define NLMPROC_NM_LOCK		22
+#define NLMPROC_FREE_ALL	23
+
+#endif /* LINUX_LOCKD_NLM_H */
diff --git a/include/linux/lockd/share.h b/include/linux/lockd/share.h
new file mode 100644
index 000000000000..5d8aa325f140
--- /dev/null
+++ b/include/linux/lockd/share.h
@@ -0,0 +1,30 @@
+/*
+ * linux/include/linux/lockd/share.h
+ *
+ * DOS share management for lockd.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_SHARE_H
+#define LINUX_LOCKD_SHARE_H
+
+/*
+ * DOS share for a specific file
+ */
+struct nlm_share {
+	struct nlm_share *	s_next;		/* linked list */
+	struct nlm_host *	s_host;		/* client host */
+	struct nlm_file *	s_file;		/* shared file */
+	struct xdr_netobj	s_owner;	/* owner handle */
+	u32			s_access;	/* access mode */
+	u32			s_mode;		/* deny mode */
+};
+
+u32	nlmsvc_share_file(struct nlm_host *, struct nlm_file *,
+					       struct nlm_args *);
+u32	nlmsvc_unshare_file(struct nlm_host *, struct nlm_file *,
+					       struct nlm_args *);
+int	nlmsvc_traverse_shares(struct nlm_host *, struct nlm_file *, int);
+
+#endif /* LINUX_LOCKD_SHARE_H */
diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h
new file mode 100644
index 000000000000..1080bb6ae315
--- /dev/null
+++ b/include/linux/lockd/sm_inter.h
@@ -0,0 +1,46 @@
+/*
+ * linux/include/linux/lockd/sm_inter.h
+ *
+ * Declarations for the kernel statd client.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_SM_INTER_H
+#define LINUX_LOCKD_SM_INTER_H
+
+#define SM_PROGRAM	100024
+#define SM_VERSION	1
+#define SM_STAT		1
+#define SM_MON		2
+#define SM_UNMON	3
+#define SM_UNMON_ALL	4
+#define SM_SIMU_CRASH	5
+#define SM_NOTIFY	6
+
+#define SM_MAXSTRLEN	1024
+
+/*
+ * Arguments for all calls to statd
+ */
+struct nsm_args {
+	u32		addr;		/* remote address */
+	u32		prog;		/* RPC callback info */
+	u32		vers;
+	u32		proc;
+	u32		proto;		/* protocol (udp/tcp) plus server/client flag */
+};
+
+/*
+ * Result returned by statd
+ */
+struct nsm_res {
+	u32		status;
+	u32		state;
+};
+
+int		nsm_monitor(struct nlm_host *);
+int		nsm_unmonitor(struct nlm_host *);
+extern u32	nsm_local_state;
+
+#endif /* LINUX_LOCKD_SM_INTER_H */
diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h
new file mode 100644
index 000000000000..d7a5cc4cfa97
--- /dev/null
+++ b/include/linux/lockd/xdr.h
@@ -0,0 +1,108 @@
+/*
+ * linux/include/linux/lockd/xdr.h
+ *
+ * XDR types for the NLM protocol
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LOCKD_XDR_H
+#define LOCKD_XDR_H
+
+#include <linux/fs.h>
+#include <linux/nfs.h>
+#include <linux/sunrpc/xdr.h>
+
+#define NLM_MAXCOOKIELEN    	32
+#define NLM_MAXSTRLEN		1024
+
+#define	nlm_granted		__constant_htonl(NLM_LCK_GRANTED)
+#define	nlm_lck_denied		__constant_htonl(NLM_LCK_DENIED)
+#define	nlm_lck_denied_nolocks	__constant_htonl(NLM_LCK_DENIED_NOLOCKS)
+#define	nlm_lck_blocked		__constant_htonl(NLM_LCK_BLOCKED)
+#define	nlm_lck_denied_grace_period	__constant_htonl(NLM_LCK_DENIED_GRACE_PERIOD)
+
+/* Lock info passed via NLM */
+struct nlm_lock {
+	char *			caller;
+	int			len; 	/* length of "caller" */
+	struct nfs_fh		fh;
+	struct xdr_netobj	oh;
+	struct file_lock	fl;
+};
+
+/*
+ *	NLM cookies. Technically they can be 1K, but Linux only uses 8 bytes.
+ *	FreeBSD uses 16, Apple Mac OS X 10.3 uses 20. Therefore we set it to
+ *	32 bytes.
+ */
+ 
+struct nlm_cookie
+{
+	unsigned char data[NLM_MAXCOOKIELEN];
+	unsigned int len;
+};
+
+/*
+ * Generic lockd arguments for all but sm_notify
+ */
+struct nlm_args {
+	struct nlm_cookie	cookie;
+	struct nlm_lock		lock;
+	u32			block;
+	u32			reclaim;
+	u32			state;
+	u32			monitor;
+	u32			fsm_access;
+	u32			fsm_mode;
+};
+
+typedef struct nlm_args nlm_args;
+
+/*
+ * Generic lockd result
+ */
+struct nlm_res {
+	struct nlm_cookie	cookie;
+	u32			status;
+	struct nlm_lock		lock;
+};
+
+/*
+ * statd callback when client has rebooted
+ */
+struct nlm_reboot {
+	char *		mon;
+	int		len;
+	u32		state;
+	u32		addr;
+	u32		vers;
+	u32		proto;
+};
+
+/*
+ * Contents of statd callback when monitored host rebooted
+ */
+#define NLMSVC_XDRSIZE		sizeof(struct nlm_args)
+
+int	nlmsvc_decode_testargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_encode_testres(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlmsvc_decode_lockargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_decode_cancargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_decode_unlockargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_encode_res(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlmsvc_decode_res(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlmsvc_encode_void(struct svc_rqst *, u32 *, void *);
+int	nlmsvc_decode_void(struct svc_rqst *, u32 *, void *);
+int	nlmsvc_decode_shareargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_encode_shareres(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlmsvc_decode_notify(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlmsvc_decode_reboot(struct svc_rqst *, u32 *, struct nlm_reboot *);
+/*
+int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+ */
+
+#endif /* LOCKD_XDR_H */
diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h
new file mode 100644
index 000000000000..cee36e7c0548
--- /dev/null
+++ b/include/linux/lockd/xdr4.h
@@ -0,0 +1,46 @@
+/*
+ * linux/include/linux/lockd/xdr.h
+ *
+ * XDR types for the NLM protocol
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LOCKD_XDR4_H
+#define LOCKD_XDR4_H
+
+#include <linux/fs.h>
+#include <linux/nfs.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/lockd/xdr.h>
+
+/* error codes new to NLMv4 */
+#define	nlm4_deadlock		__constant_htonl(NLM_DEADLCK)
+#define	nlm4_rofs		__constant_htonl(NLM_ROFS)
+#define	nlm4_stale_fh		__constant_htonl(NLM_STALE_FH)
+#define	nlm4_fbig		__constant_htonl(NLM_FBIG)
+#define	nlm4_failed		__constant_htonl(NLM_FAILED)
+
+
+
+int	nlm4svc_decode_testargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_encode_testres(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlm4svc_decode_lockargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_decode_cancargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_decode_unlockargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_encode_res(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlm4svc_decode_res(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlm4svc_encode_void(struct svc_rqst *, u32 *, void *);
+int	nlm4svc_decode_void(struct svc_rqst *, u32 *, void *);
+int	nlm4svc_decode_shareargs(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_encode_shareres(struct svc_rqst *, u32 *, struct nlm_res *);
+int	nlm4svc_decode_notify(struct svc_rqst *, u32 *, struct nlm_args *);
+int	nlm4svc_decode_reboot(struct svc_rqst *, u32 *, struct nlm_reboot *);
+/*
+int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+ */
+
+#endif /* LOCKD_XDR4_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
new file mode 100644
index 000000000000..8220d9c9da00
--- /dev/null
+++ b/include/linux/loop.h
@@ -0,0 +1,161 @@
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
+
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+
+#define LO_NAME_SIZE	64
+#define LO_KEY_SIZE	32
+
+#ifdef __KERNEL__
+#include <linux/bio.h>
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+
+/* Possible states of device */
+enum {
+	Lo_unbound,
+	Lo_bound,
+	Lo_rundown,
+};
+
+struct loop_func_table;
+
+struct loop_device {
+	int		lo_number;
+	int		lo_refcnt;
+	loff_t		lo_offset;
+	loff_t		lo_sizelimit;
+	int		lo_flags;
+	int		(*transfer)(struct loop_device *, int cmd,
+				    struct page *raw_page, unsigned raw_off,
+				    struct page *loop_page, unsigned loop_off,
+				    int size, sector_t real_block);
+	char		lo_file_name[LO_NAME_SIZE];
+	char		lo_crypt_name[LO_NAME_SIZE];
+	char		lo_encrypt_key[LO_KEY_SIZE];
+	int		lo_encrypt_key_size;
+	struct loop_func_table *lo_encryption;
+	__u32           lo_init[2];
+	uid_t		lo_key_owner;	/* Who set the key */
+	int		(*ioctl)(struct loop_device *, int cmd, 
+				 unsigned long arg); 
+
+	struct file *	lo_backing_file;
+	struct block_device *lo_device;
+	unsigned	lo_blocksize;
+	void		*key_data; 
+
+	int		old_gfp_mask;
+
+	spinlock_t		lo_lock;
+	struct bio 		*lo_bio;
+	struct bio		*lo_biotail;
+	int			lo_state;
+	struct semaphore	lo_sem;
+	struct semaphore	lo_ctl_mutex;
+	struct semaphore	lo_bh_mutex;
+	atomic_t		lo_pending;
+
+	request_queue_t		*lo_queue;
+};
+
+#endif /* __KERNEL__ */
+
+/*
+ * Loop flags
+ */
+enum {
+	LO_FLAGS_READ_ONLY	= 1,
+	LO_FLAGS_USE_AOPS	= 2,
+};
+
+#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
+#include <asm/types.h>		/* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+	int		   lo_number;		/* ioctl r/o */
+	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
+	unsigned long	   lo_inode; 		/* ioctl r/o */
+	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
+	int		   lo_offset;
+	int		   lo_encrypt_type;
+	int		   lo_encrypt_key_size; 	/* ioctl w/o */
+	int		   lo_flags;			/* ioctl r/o */
+	char		   lo_name[LO_NAME_SIZE];
+	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	unsigned long	   lo_init[2];
+	char		   reserved[4];
+};
+
+struct loop_info64 {
+	__u64		   lo_device;			/* ioctl r/o */
+	__u64		   lo_inode;			/* ioctl r/o */
+	__u64		   lo_rdevice;			/* ioctl r/o */
+	__u64		   lo_offset;
+	__u64		   lo_sizelimit;/* bytes, 0 == max available */
+	__u32		   lo_number;			/* ioctl r/o */
+	__u32		   lo_encrypt_type;
+	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
+	__u32		   lo_flags;			/* ioctl r/o */
+	__u8		   lo_file_name[LO_NAME_SIZE];
+	__u8		   lo_crypt_name[LO_NAME_SIZE];
+	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	__u64		   lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE		0
+#define LO_CRYPT_XOR		1
+#define LO_CRYPT_DES		2
+#define LO_CRYPT_FISH2		3    /* Twofish encryption */
+#define LO_CRYPT_BLOW		4
+#define LO_CRYPT_CAST128	5
+#define LO_CRYPT_IDEA		6
+#define LO_CRYPT_DUMMY		9
+#define LO_CRYPT_SKIPJACK	10
+#define LO_CRYPT_CRYPTOAPI	18
+#define MAX_LO_CRYPT		20
+
+#ifdef __KERNEL__
+/* Support for loadable transfer modules */
+struct loop_func_table {
+	int number;	/* filter type */ 
+	int (*transfer)(struct loop_device *lo, int cmd,
+			struct page *raw_page, unsigned raw_off,
+			struct page *loop_page, unsigned loop_off,
+			int size, sector_t real_block);
+	int (*init)(struct loop_device *, const struct loop_info64 *); 
+	/* release is called from loop_unregister_transfer or clr_fd */
+	int (*release)(struct loop_device *); 
+	int (*ioctl)(struct loop_device *, int cmd, unsigned long arg);
+	struct module *owner;
+}; 
+
+int loop_register_transfer(struct loop_func_table *funcs);
+int loop_unregister_transfer(int number); 
+
+#endif
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD		0x4C00
+#define LOOP_CLR_FD		0x4C01
+#define LOOP_SET_STATUS		0x4C02
+#define LOOP_GET_STATUS		0x4C03
+#define LOOP_SET_STATUS64	0x4C04
+#define LOOP_GET_STATUS64	0x4C05
+#define LOOP_CHANGE_FD		0x4C06
+
+#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
new file mode 100644
index 000000000000..7059b6b9878a
--- /dev/null
+++ b/include/linux/lp.h
@@ -0,0 +1,191 @@
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
+
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
+/* 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+#ifdef __KERNEL__
+
+#include <linux/wait.h>
+#include <asm/semaphore.h>
+
+/* Magic numbers for defining port-device mappings */
+#define LP_PARPORT_UNSPEC -4
+#define LP_PARPORT_AUTO -3
+#define LP_PARPORT_OFF -2
+#define LP_PARPORT_NONE -1
+
+#define LP_F(minor)	lp_table[(minor)].flags		/* flags for busy, etc. */
+#define LP_CHAR(minor)	lp_table[(minor)].chars		/* busy timeout */
+#define LP_TIME(minor)	lp_table[(minor)].time		/* wait time */
+#define LP_WAIT(minor)	lp_table[(minor)].wait		/* strobe wait */
+#define LP_IRQ(minor)	lp_table[(minor)].dev->port->irq /* interrupt # */
+					/* PARPORT_IRQ_NONE means polled */
+#ifdef LP_STATS
+#define LP_STAT(minor)	lp_table[(minor)].stats		/* statistics area */
+#endif
+#define LP_BUFFER_SIZE PAGE_SIZE
+
+#define LP_BASE(x)	lp_table[(x)].dev->port->base
+
+#ifdef LP_STATS
+struct lp_stats {
+	unsigned long chars;
+	unsigned long sleeps;
+	unsigned int maxrun;
+	unsigned int maxwait;
+	unsigned int meanwait;
+	unsigned int mdev;
+};
+#endif
+
+struct lp_struct {
+	struct pardevice *dev;
+	unsigned long flags;
+	unsigned int chars;
+	unsigned int time;
+	unsigned int wait;
+	char *lp_buffer;
+#ifdef LP_STATS
+	unsigned int lastcall;
+	unsigned int runchars;
+	struct lp_stats stats;
+#endif
+	wait_queue_head_t waitq;
+	unsigned int last_error;
+	struct semaphore port_mutex;
+	wait_queue_head_t dataq;
+	long timeout;
+	unsigned int best_mode;
+	unsigned int current_mode;
+	unsigned long bits;
+};
+
+/*
+ * The following constants describe the various signals of the printer port
+ * hardware.  Note that the hardware inverts some signals and that some
+ * signals are active low.  An example is LP_STROBE, which must be programmed
+ * with 1 for being active and 0 for being inactive, because the strobe signal
+ * gets inverted, but it is also active low.
+ */
+
+
+/* 
+ * defines for 8255 control port
+ * base + 2 
+ * accessed with LP_C(minor)
+ */
+#define LP_PINTEN	0x10  /* high to read data in or-ed with data out */
+#define LP_PSELECP	0x08  /* inverted output, active low */
+#define LP_PINITP	0x04  /* unchanged output, active low */
+#define LP_PAUTOLF	0x02  /* inverted output, active low */
+#define LP_PSTROBE	0x01  /* short high output on raising edge */
+
+/* 
+ * the value written to ports to test existence. PC-style ports will 
+ * return the value written. AT-style ports will return 0. so why not
+ * make them the same ? 
+ */
+#define LP_DUMMY	0x00
+
+/*
+ * This is the port delay time, in microseconds.
+ * It is used only in the lp_init() and lp_reset() routine.
+ */
+#define LP_DELAY 	50
+
+#endif
+
+#endif
diff --git a/include/linux/major.h b/include/linux/major.h
new file mode 100644
index 000000000000..4b62c42b842c
--- /dev/null
+++ b/include/linux/major.h
@@ -0,0 +1,167 @@
+#ifndef _LINUX_MAJOR_H
+#define _LINUX_MAJOR_H
+
+/*
+ * This file has definitions for major device numbers.
+ * For the device number assignments, see Documentation/devices.txt.
+ */
+
+#define UNNAMED_MAJOR		0
+#define MEM_MAJOR		1
+#define RAMDISK_MAJOR		1
+#define FLOPPY_MAJOR		2
+#define PTY_MASTER_MAJOR	2
+#define IDE0_MAJOR		3
+#define HD_MAJOR		IDE0_MAJOR
+#define PTY_SLAVE_MAJOR		3
+#define TTY_MAJOR		4
+#define TTYAUX_MAJOR		5
+#define LP_MAJOR		6
+#define VCS_MAJOR		7
+#define LOOP_MAJOR		7
+#define SCSI_DISK0_MAJOR	8
+#define SCSI_TAPE_MAJOR		9
+#define MD_MAJOR		9
+#define MISC_MAJOR		10
+#define SCSI_CDROM_MAJOR	11
+#define MUX_MAJOR		11	/* PA-RISC only */
+#define XT_DISK_MAJOR		13
+#define INPUT_MAJOR		13
+#define SOUND_MAJOR		14
+#define CDU31A_CDROM_MAJOR	15
+#define JOYSTICK_MAJOR		15
+#define GOLDSTAR_CDROM_MAJOR	16
+#define OPTICS_CDROM_MAJOR	17
+#define SANYO_CDROM_MAJOR	18
+#define CYCLADES_MAJOR		19
+#define CYCLADESAUX_MAJOR	20
+#define MITSUMI_X_CDROM_MAJOR	20
+#define MFM_ACORN_MAJOR		21	/* ARM Linux /dev/mfm */
+#define SCSI_GENERIC_MAJOR	21
+#define IDE1_MAJOR		22
+#define DIGICU_MAJOR		22
+#define DIGI_MAJOR		23
+#define MITSUMI_CDROM_MAJOR	23
+#define CDU535_CDROM_MAJOR	24
+#define STL_SERIALMAJOR		24
+#define MATSUSHITA_CDROM_MAJOR	25
+#define STL_CALLOUTMAJOR	25
+#define MATSUSHITA_CDROM2_MAJOR	26
+#define QIC117_TAPE_MAJOR	27
+#define MATSUSHITA_CDROM3_MAJOR	27
+#define MATSUSHITA_CDROM4_MAJOR	28
+#define STL_SIOMEMMAJOR		28
+#define ACSI_MAJOR		28
+#define AZTECH_CDROM_MAJOR	29
+#define GRAPHDEV_MAJOR		29   /* SparcLinux & Linux/68k /dev/fb */
+#define CM206_CDROM_MAJOR	32
+#define IDE2_MAJOR		33
+#define IDE3_MAJOR		34
+#define Z8530_MAJOR		34
+#define XPRAM_MAJOR		35   /* Expanded storage on S/390: "slow ram"*/
+#define NETLINK_MAJOR		36
+#define PS2ESDI_MAJOR		36
+#define IDETAPE_MAJOR		37
+#define Z2RAM_MAJOR		37
+#define APBLOCK_MAJOR		38   /* AP1000 Block device */
+#define DDV_MAJOR		39   /* AP1000 DDV block device */
+#define NBD_MAJOR		43   /* Network block device	*/
+#define RISCOM8_NORMAL_MAJOR	48
+#define DAC960_MAJOR		48   /* 48..55 */
+#define RISCOM8_CALLOUT_MAJOR	49
+#define MKISS_MAJOR		55
+#define DSP56K_MAJOR		55   /* DSP56001 processor device */
+
+#define IDE4_MAJOR		56
+#define IDE5_MAJOR		57
+
+#define SCSI_DISK1_MAJOR	65
+#define SCSI_DISK2_MAJOR	66
+#define SCSI_DISK3_MAJOR	67
+#define SCSI_DISK4_MAJOR	68
+#define SCSI_DISK5_MAJOR	69
+#define SCSI_DISK6_MAJOR	70
+#define SCSI_DISK7_MAJOR	71
+
+#define COMPAQ_SMART2_MAJOR	72
+#define COMPAQ_SMART2_MAJOR1	73
+#define COMPAQ_SMART2_MAJOR2	74
+#define COMPAQ_SMART2_MAJOR3	75
+#define COMPAQ_SMART2_MAJOR4	76
+#define COMPAQ_SMART2_MAJOR5	77
+#define COMPAQ_SMART2_MAJOR6	78
+#define COMPAQ_SMART2_MAJOR7	79
+
+#define SPECIALIX_NORMAL_MAJOR	75
+#define SPECIALIX_CALLOUT_MAJOR	76
+
+#define AURORA_MAJOR		79
+
+#define I2O_MAJOR		80	/* 80->87 */
+
+#define SHMIQ_MAJOR		85   /* Linux/mips, SGI /dev/shmiq */
+
+#define IDE6_MAJOR		88
+#define IDE7_MAJOR		89
+#define IDE8_MAJOR		90
+#define IDE9_MAJOR		91
+
+#define DASD_MAJOR		94
+
+#define MDISK_MAJOR		95
+
+#define UBD_MAJOR		98
+
+#define JSFD_MAJOR		99
+
+#define PHONE_MAJOR		100
+
+#define COMPAQ_CISS_MAJOR	104
+#define COMPAQ_CISS_MAJOR1	105
+#define COMPAQ_CISS_MAJOR2      106
+#define COMPAQ_CISS_MAJOR3      107
+#define COMPAQ_CISS_MAJOR4      108
+#define COMPAQ_CISS_MAJOR5      109
+#define COMPAQ_CISS_MAJOR6      110
+#define COMPAQ_CISS_MAJOR7      111
+
+#define VIODASD_MAJOR		112
+#define VIOCD_MAJOR		113
+
+#define ATARAID_MAJOR		114
+
+#define SCSI_DISK8_MAJOR	128
+#define SCSI_DISK9_MAJOR	129
+#define SCSI_DISK10_MAJOR	130
+#define SCSI_DISK11_MAJOR	131
+#define SCSI_DISK12_MAJOR	132
+#define SCSI_DISK13_MAJOR	133
+#define SCSI_DISK14_MAJOR	134
+#define SCSI_DISK15_MAJOR	135
+
+#define UNIX98_PTY_MASTER_MAJOR	128
+#define UNIX98_PTY_MAJOR_COUNT	8
+#define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
+
+#define RTF_MAJOR		150
+#define RAW_MAJOR		162
+
+#define USB_ACM_MAJOR		166
+#define USB_ACM_AUX_MAJOR	167
+#define USB_CHAR_MAJOR		180
+
+#define VXVM_MAJOR		199	/* VERITAS volume i/o driver    */
+#define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
+#define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
+
+#define MSR_MAJOR		202
+#define CPUID_MAJOR		203
+
+#define OSST_MAJOR		206	/* OnStream-SCx0 SCSI tape */
+
+#define IBM_TTY3270_MAJOR	227
+#define IBM_FS3270_MAJOR	228
+
+#define VIOTAPE_MAJOR		230
+
+#endif
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
new file mode 100644
index 000000000000..ae5b09493062
--- /dev/null
+++ b/include/linux/matroxfb.h
@@ -0,0 +1,43 @@
+#ifndef __LINUX_MATROXFB_H__
+#define __LINUX_MATROXFB_H__
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+#include <linux/videodev2.h>
+
+struct matroxioc_output_mode {
+	__u32	output;		/* which output */
+#define MATROXFB_OUTPUT_PRIMARY		0x0000
+#define MATROXFB_OUTPUT_SECONDARY	0x0001
+#define MATROXFB_OUTPUT_DFP		0x0002
+	__u32	mode;		/* which mode */
+#define MATROXFB_OUTPUT_MODE_PAL	0x0001
+#define MATROXFB_OUTPUT_MODE_NTSC	0x0002
+#define MATROXFB_OUTPUT_MODE_MONITOR	0x0080
+};
+#define MATROXFB_SET_OUTPUT_MODE	_IOW('n',0xFA,size_t)
+#define MATROXFB_GET_OUTPUT_MODE	_IOWR('n',0xFA,size_t)
+
+/* bitfield */
+#define MATROXFB_OUTPUT_CONN_PRIMARY	(1 << MATROXFB_OUTPUT_PRIMARY)
+#define MATROXFB_OUTPUT_CONN_SECONDARY	(1 << MATROXFB_OUTPUT_SECONDARY)
+#define MATROXFB_OUTPUT_CONN_DFP	(1 << MATROXFB_OUTPUT_DFP)
+/* connect these outputs to this framebuffer */
+#define MATROXFB_SET_OUTPUT_CONNECTION	_IOW('n',0xF8,size_t)
+/* which outputs are connected to this framebuffer */
+#define MATROXFB_GET_OUTPUT_CONNECTION	_IOR('n',0xF8,size_t)
+/* which outputs are available for this framebuffer */
+#define MATROXFB_GET_AVAILABLE_OUTPUTS	_IOR('n',0xF9,size_t)
+/* which outputs exist on this framebuffer */
+#define MATROXFB_GET_ALL_OUTPUTS	_IOR('n',0xFB,size_t)
+
+enum matroxfb_ctrl_id {
+  MATROXFB_CID_TESTOUT	 = V4L2_CID_PRIVATE_BASE,
+  MATROXFB_CID_DEFLICKER,
+  MATROXFB_CID_LAST
+};
+
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, u_int32_t)
+
+#endif
+
diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h
new file mode 100644
index 000000000000..8e5a10410a30
--- /dev/null
+++ b/include/linux/mbcache.h
@@ -0,0 +1,52 @@
+/*
+  File: linux/mbcache.h
+
+  (C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org>
+*/
+
+/* Hardwire the number of additional indexes */
+#define MB_CACHE_INDEXES_COUNT 1
+
+struct mb_cache_entry {
+	struct list_head		e_lru_list;
+	struct mb_cache			*e_cache;
+	unsigned short			e_used;
+	unsigned short			e_queued;
+	struct block_device		*e_bdev;
+	sector_t			e_block;
+	struct list_head		e_block_list;
+	struct {
+		struct list_head	o_list;
+		unsigned int		o_key;
+	} e_indexes[0];
+};
+
+struct mb_cache_op {
+	int (*free)(struct mb_cache_entry *, int);
+};
+
+/* Functions on caches */
+
+struct mb_cache * mb_cache_create(const char *, struct mb_cache_op *, size_t,
+				  int, int);
+void mb_cache_shrink(struct mb_cache *, struct block_device *);
+void mb_cache_destroy(struct mb_cache *);
+
+/* Functions on cache entries */
+
+struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *);
+int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
+			  sector_t, unsigned int[]);
+void mb_cache_entry_release(struct mb_cache_entry *);
+void mb_cache_entry_free(struct mb_cache_entry *);
+struct mb_cache_entry *mb_cache_entry_get(struct mb_cache *,
+					  struct block_device *,
+					  sector_t);
+#if !defined(MB_CACHE_INDEXES_COUNT) || (MB_CACHE_INDEXES_COUNT > 0)
+struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache, int,
+						 struct block_device *, 
+						 unsigned int);
+struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *, int,
+						struct block_device *, 
+						unsigned int);
+#endif
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
new file mode 100644
index 000000000000..bbc93ae217e1
--- /dev/null
+++ b/include/linux/mc146818rtc.h
@@ -0,0 +1,92 @@
+/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
+ * derived from Data Sheet, Copyright Motorola 1984 (!).
+ * It was written to be part of the Linux operating system.
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _MC146818RTC_H
+#define _MC146818RTC_H
+
+#include <asm/io.h>
+#include <linux/rtc.h>			/* get the user-level API */
+#include <asm/mc146818rtc.h>		/* register access macros */
+
+#ifdef __KERNEL__
+#include <linux/spinlock.h>		/* spinlock_t */
+extern spinlock_t rtc_lock;		/* serialize CMOS RAM access */
+#endif
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_SECONDS		0
+#define RTC_SECONDS_ALARM	1
+#define RTC_MINUTES		2
+#define RTC_MINUTES_ALARM	3
+#define RTC_HOURS		4
+#define RTC_HOURS_ALARM		5
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE 	0xC0
+
+#define RTC_DAY_OF_WEEK		6
+#define RTC_DAY_OF_MONTH	7
+#define RTC_MONTH		8
+#define RTC_YEAR		9
+
+/* control registers - Moto names
+ */
+#define RTC_REG_A		10
+#define RTC_REG_B		11
+#define RTC_REG_C		12
+#define RTC_REG_D		13
+
+/**********************************************************************
+ * register details
+ **********************************************************************/
+#define RTC_FREQ_SELECT	RTC_REG_A
+
+/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
+ * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
+ * totalling to a max high interval of 2.228 ms.
+ */
+# define RTC_UIP		0x80
+# define RTC_DIV_CTL		0x70
+   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
+#  define RTC_REF_CLCK_4MHZ	0x00
+#  define RTC_REF_CLCK_1MHZ	0x10
+#  define RTC_REF_CLCK_32KHZ	0x20
+   /* 2 values for divider stage reset, others for "testing purposes only" */
+#  define RTC_DIV_RESET1	0x60
+#  define RTC_DIV_RESET2	0x70
+  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
+# define RTC_RATE_SELECT 	0x0F
+
+/**********************************************************************/
+#define RTC_CONTROL	RTC_REG_B
+# define RTC_SET 0x80		/* disable updates for clock setting */
+# define RTC_PIE 0x40		/* periodic interrupt enable */
+# define RTC_AIE 0x20		/* alarm interrupt enable */
+# define RTC_UIE 0x10		/* update-finished interrupt enable */
+# define RTC_SQWE 0x08		/* enable square-wave output */
+# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */
+
+/**********************************************************************/
+#define RTC_INTR_FLAGS	RTC_REG_C
+/* caution - cleared by read */
+# define RTC_IRQF 0x80		/* any of the following 3 is active */
+# define RTC_PF 0x40
+# define RTC_AF 0x20
+# define RTC_UF 0x10
+
+/**********************************************************************/
+#define RTC_VALID	RTC_REG_D
+# define RTC_VRT 0x80		/* valid RAM and time */
+/**********************************************************************/
+
+#endif /* _MC146818RTC_H */
diff --git a/include/linux/mc6821.h b/include/linux/mc6821.h
new file mode 100644
index 000000000000..28e301e295da
--- /dev/null
+++ b/include/linux/mc6821.h
@@ -0,0 +1,51 @@
+#ifndef _MC6821_H_
+#define _MC6821_H_
+
+/*
+ * This file describes the memery mapping of the MC6821 PIA.
+ * The unions describe overlayed registers. Which of them is used is
+ * determined by bit 2 of the corresponding control register.
+ * this files expects the PIA_REG_PADWIDTH to be defined the numeric
+ * value of the register spacing.
+ *
+ * Data came from MFC-31-Developer Kit (from Ralph Seidel,
+ * zodiac@darkness.gun.de) and Motorola Data Sheet (from 
+ * Richard Hirst, srh@gpt.co.uk)
+ *
+ * 6.11.95 copyright Joerg Dorchain (dorchain@mpi-sb.mpg.de)
+ *
+ */
+
+#ifndef PIA_REG_PADWIDTH
+#define PIA_REG_PADWIDTH 255
+#endif
+
+struct pia {
+	union {
+		volatile u_char pra;
+		volatile u_char ddra;
+	} ua;
+	u_char pad1[PIA_REG_PADWIDTH];
+	volatile u_char cra;
+	u_char pad2[PIA_REG_PADWIDTH];
+	union {
+		volatile u_char prb;
+		volatile u_char ddrb;
+	} ub;
+	u_char pad3[PIA_REG_PADWIDTH];
+	volatile u_char crb;
+	u_char pad4[PIA_REG_PADWIDTH];
+};
+
+#define ppra ua.pra
+#define pddra ua.ddra
+#define pprb ub.prb
+#define pddrb ub.ddrb
+
+#define PIA_C1_ENABLE_IRQ (1<<0)
+#define PIA_C1_LOW_TO_HIGH (1<<1)
+#define PIA_DDR (1<<2)
+#define PIA_IRQ2 (1<<6)
+#define PIA_IRQ1 (1<<7)
+
+#endif
diff --git a/include/linux/mca-legacy.h b/include/linux/mca-legacy.h
new file mode 100644
index 000000000000..f2bb770e530a
--- /dev/null
+++ b/include/linux/mca-legacy.h
@@ -0,0 +1,67 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* This is the function prototypes for the old legacy MCA interface
+ *
+ * Please move your driver to the new sysfs based one instead */
+
+#ifndef _LINUX_MCA_LEGACY_H
+#define _LINUX_MCA_LEGACY_H
+
+#include <linux/mca.h>
+
+#warning "MCA legacy - please move your driver to the new sysfs api"
+
+/* MCA_NOTFOUND is an error condition.  The other two indicate
+ * motherboard POS registers contain the adapter.  They might be
+ * returned by the mca_find_adapter() function, and can be used as
+ * arguments to mca_read_stored_pos().  I'm not going to allow direct
+ * access to the motherboard registers until we run across an adapter
+ * that requires it.  We don't know enough about them to know if it's
+ * safe.
+ *
+ * See Documentation/mca.txt or one of the existing drivers for
+ * more information.
+ */
+#define MCA_NOTFOUND	(-1)
+
+
+
+/* Returns the slot of the first enabled adapter matching id.  User can
+ * specify a starting slot beyond zero, to deal with detecting multiple
+ * devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
+ * integrated adapters.
+ */
+extern int mca_find_adapter(int id, int start);
+extern int mca_find_unused_adapter(int id, int start);
+
+extern int mca_is_adapter_used(int slot);
+extern int mca_mark_as_used(int slot);
+extern void mca_mark_as_unused(int slot);
+
+/* gets a byte out of POS register (stored in memory) */
+extern unsigned char mca_read_stored_pos(int slot, int reg);
+
+/* This can be expanded later.  Right now, it gives us a way of
+ * getting meaningful information into the MCA_info structure,
+ * so we can have a more interesting /proc/mca.
+ */
+extern void mca_set_adapter_name(int slot, char* name);
+
+/* These routines actually mess with the hardware POS registers.  They
+ * temporarily disable the device (and interrupts), so make sure you know
+ * what you're doing if you use them.  Furthermore, writing to a POS may
+ * result in two devices trying to share a resource, which in turn can
+ * result in multiple devices sharing memory spaces, IRQs, or even trashing
+ * hardware.  YOU HAVE BEEN WARNED.
+ *
+ * You can only access slots with this.  Motherboard registers are off
+ * limits.
+ */
+
+/* read a byte from the specified POS register. */
+extern unsigned char mca_read_pos(int slot, int reg);
+
+/* write a byte to the specified POS register. */
+extern void mca_write_pos(int slot, int reg, unsigned char byte);
+
+#endif
diff --git a/include/linux/mca.h b/include/linux/mca.h
new file mode 100644
index 000000000000..5cff2923092b
--- /dev/null
+++ b/include/linux/mca.h
@@ -0,0 +1,146 @@
+/*
+ * Header for Microchannel Architecture Bus
+ * Written by Martin Kolinek, February 1996
+ */
+
+#ifndef _LINUX_MCA_H
+#define _LINUX_MCA_H
+
+#include <linux/device.h>
+
+#ifdef CONFIG_MCA
+#include <asm/mca.h>
+
+extern int MCA_bus;
+#else
+#define MCA_bus 0
+#endif
+
+/* This sets up an information callback for /proc/mca/slot?.  The
+ * function is called with the buffer, slot, and device pointer (or
+ * some equally informative context information, or nothing, if you
+ * prefer), and is expected to put useful information into the
+ * buffer.  The adapter name, id, and POS registers get printed
+ * before this is called though, so don't do it again.
+ *
+ * This should be called with a NULL procfn when a module
+ * unregisters, thus preventing kernel crashes and other such
+ * nastiness.
+ */
+typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
+
+/* Should only be called by the NMI interrupt handler, this will do some
+ * fancy stuff to figure out what might have generated a NMI.
+ */
+extern void mca_handle_nmi(void);
+
+enum MCA_AdapterStatus {
+	MCA_ADAPTER_NORMAL = 0,
+	MCA_ADAPTER_NONE = 1,
+	MCA_ADAPTER_DISABLED = 2,
+	MCA_ADAPTER_ERROR = 3
+};
+
+struct mca_device {
+	u64			dma_mask;
+	int			pos_id;
+	int			slot;
+
+	/* index into id_table, set by the bus match routine */
+	int			index;
+
+	/* is there a driver installed? 0 - No, 1 - Yes */
+	int			driver_loaded;
+	/* POS registers */
+	unsigned char		pos[8];
+	/* if a pseudo adapter of the motherboard, this is the motherboard
+	 * register value to use for setup cycles */
+	short			pos_register;
+	
+	enum MCA_AdapterStatus	status;
+#ifdef CONFIG_MCA_PROC_FS
+	/* name of the proc/mca file */
+	char			procname[8];
+	/* /proc info callback */
+	MCA_ProcFn		procfn;
+	/* device/context info for proc callback */
+	void			*proc_dev;
+#endif
+	struct device		dev;
+	char			name[32];
+};
+#define to_mca_device(mdev) container_of(mdev, struct mca_device, dev)
+
+struct mca_bus_accessor_functions {
+	unsigned char	(*mca_read_pos)(struct mca_device *, int reg);
+	void		(*mca_write_pos)(struct mca_device *, int reg,
+					 unsigned char byte);
+	int		(*mca_transform_irq)(struct mca_device *, int irq);
+	int		(*mca_transform_ioport)(struct mca_device *,
+						  int region);
+	void *		(*mca_transform_memory)(struct mca_device *,
+						void *memory);
+};
+
+struct mca_bus {
+	u64			default_dma_mask;
+	int			number;
+	struct mca_bus_accessor_functions f;
+	struct device		dev;
+	char			name[32];
+};
+#define to_mca_bus(mdev) container_of(mdev, struct mca_bus, dev)
+
+struct mca_driver {
+	const short		*id_table;
+	void			*driver_data;
+	struct device_driver	driver;
+};
+#define to_mca_driver(mdriver) container_of(mdriver, struct mca_driver, driver)
+
+/* Ongoing supported API functions */
+extern struct mca_device *mca_find_device_by_slot(int slot);
+extern int mca_system_init(void);
+extern struct mca_bus *mca_attach_bus(int);
+
+extern unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev,
+						int reg);
+extern unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg);
+extern void mca_device_write_pos(struct mca_device *mca_dev, int reg,
+				 unsigned char byte);
+extern int mca_device_transform_irq(struct mca_device *mca_dev, int irq);
+extern int mca_device_transform_ioport(struct mca_device *mca_dev, int port);
+extern void *mca_device_transform_memory(struct mca_device *mca_dev,
+					 void *mem);
+extern int mca_device_claimed(struct mca_device *mca_dev);
+extern void mca_device_set_claim(struct mca_device *mca_dev, int val);
+extern void mca_device_set_name(struct mca_device *mca_dev, const char *name);
+static inline char *mca_device_get_name(struct mca_device *mca_dev)
+{
+	return mca_dev ? mca_dev->name : NULL;
+}
+
+extern enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev);
+
+extern struct bus_type mca_bus_type;
+
+extern int mca_register_driver(struct mca_driver *drv);
+extern void mca_unregister_driver(struct mca_driver *drv);
+
+/* WARNING: only called by the boot time device setup */
+extern int mca_register_device(int bus, struct mca_device *mca_dev);
+
+#ifdef CONFIG_MCA_PROC_FS
+extern void mca_do_proc_init(void);
+extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
+#else
+static inline void mca_do_proc_init(void)
+{
+}
+
+static inline void mca_set_adapter_procfn(int slot, MCA_ProcFn fn, void* dev)
+{
+}
+#endif
+
+#endif /* _LINUX_MCA_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
new file mode 100644
index 000000000000..8480aef10e62
--- /dev/null
+++ b/include/linux/mempolicy.h
@@ -0,0 +1,229 @@
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
+
+#include <linux/errno.h>
+
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+
+/* Policies */
+#define MPOL_DEFAULT	0
+#define MPOL_PREFERRED	1
+#define MPOL_BIND	2
+#define MPOL_INTERLEAVE	3
+
+#define MPOL_MAX MPOL_INTERLEAVE
+
+/* Flags for get_mem_policy */
+#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
+#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/mmzone.h>
+#include <linux/bitmap.h>
+#include <linux/slab.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+
+struct vm_area_struct;
+
+#ifdef CONFIG_NUMA
+
+/*
+ * Describe a memory policy.
+ *
+ * A mempolicy can be either associated with a process or with a VMA.
+ * For VMA related allocations the VMA policy is preferred, otherwise
+ * the process policy is used. Interrupts ignore the memory policy
+ * of the current process.
+ *
+ * Locking policy for interlave:
+ * In process context there is no locking because only the process accesses
+ * its own state. All vma manipulation is somewhat protected by a down_read on
+ * mmap_sem. For allocating in the interleave policy the page_table_lock
+ * must be also aquired to protect il_next.
+ *
+ * Freeing policy:
+ * When policy is MPOL_BIND v.zonelist is kmalloc'ed and must be kfree'd.
+ * All other policies don't have any external state. mpol_free() handles this.
+ *
+ * Copying policy objects:
+ * For MPOL_BIND the zonelist must be always duplicated. mpol_clone() does this.
+ */
+struct mempolicy {
+	atomic_t refcnt;
+	short policy; 	/* See MPOL_* above */
+	union {
+		struct zonelist  *zonelist;	/* bind */
+		short 		 preferred_node; /* preferred */
+		DECLARE_BITMAP(nodes, MAX_NUMNODES); /* interleave */
+		/* undefined for default */
+	} v;
+};
+
+/*
+ * Support for managing mempolicy data objects (clone, copy, destroy)
+ * The default fast path of a NULL MPOL_DEFAULT policy is always inlined.
+ */
+
+extern void __mpol_free(struct mempolicy *pol);
+static inline void mpol_free(struct mempolicy *pol)
+{
+	if (pol)
+		__mpol_free(pol);
+}
+
+extern struct mempolicy *__mpol_copy(struct mempolicy *pol);
+static inline struct mempolicy *mpol_copy(struct mempolicy *pol)
+{
+	if (pol)
+		pol = __mpol_copy(pol);
+	return pol;
+}
+
+#define vma_policy(vma) ((vma)->vm_policy)
+#define vma_set_policy(vma, pol) ((vma)->vm_policy = (pol))
+
+static inline void mpol_get(struct mempolicy *pol)
+{
+	if (pol)
+		atomic_inc(&pol->refcnt);
+}
+
+extern int __mpol_equal(struct mempolicy *a, struct mempolicy *b);
+static inline int mpol_equal(struct mempolicy *a, struct mempolicy *b)
+{
+	if (a == b)
+		return 1;
+	return __mpol_equal(a, b);
+}
+#define vma_mpol_equal(a,b) mpol_equal(vma_policy(a), vma_policy(b))
+
+/* Could later add inheritance of the process policy here. */
+
+#define mpol_set_vma_default(vma) ((vma)->vm_policy = NULL)
+
+/*
+ * Hugetlb policy. i386 hugetlb so far works with node numbers
+ * instead of zone lists, so give it special interfaces for now.
+ */
+extern int mpol_first_node(struct vm_area_struct *vma, unsigned long addr);
+extern int mpol_node_valid(int nid, struct vm_area_struct *vma,
+			unsigned long addr);
+
+/*
+ * Tree of shared policies for a shared memory region.
+ * Maintain the policies in a pseudo mm that contains vmas. The vmas
+ * carry the policy. As a special twist the pseudo mm is indexed in pages, not
+ * bytes, so that we can work with shared memory segments bigger than
+ * unsigned long.
+ */
+
+struct sp_node {
+	struct rb_node nd;
+	unsigned long start, end;
+	struct mempolicy *policy;
+};
+
+struct shared_policy {
+	struct rb_root root;
+	spinlock_t lock;
+};
+
+static inline void mpol_shared_policy_init(struct shared_policy *info)
+{
+	info->root = RB_ROOT;
+	spin_lock_init(&info->lock);
+}
+
+int mpol_set_shared_policy(struct shared_policy *info,
+				struct vm_area_struct *vma,
+				struct mempolicy *new);
+void mpol_free_shared_policy(struct shared_policy *p);
+struct mempolicy *mpol_shared_policy_lookup(struct shared_policy *sp,
+					    unsigned long idx);
+
+extern void numa_default_policy(void);
+extern void numa_policy_init(void);
+
+#else
+
+struct mempolicy {};
+
+static inline int mpol_equal(struct mempolicy *a, struct mempolicy *b)
+{
+	return 1;
+}
+#define vma_mpol_equal(a,b) 1
+
+#define mpol_set_vma_default(vma) do {} while(0)
+
+static inline void mpol_free(struct mempolicy *p)
+{
+}
+
+static inline void mpol_get(struct mempolicy *pol)
+{
+}
+
+static inline struct mempolicy *mpol_copy(struct mempolicy *old)
+{
+	return NULL;
+}
+
+static inline int mpol_first_node(struct vm_area_struct *vma, unsigned long a)
+{
+	return numa_node_id();
+}
+
+static inline int
+mpol_node_valid(int nid, struct vm_area_struct *vma, unsigned long a)
+{
+	return 1;
+}
+
+struct shared_policy {};
+
+static inline int mpol_set_shared_policy(struct shared_policy *info,
+					struct vm_area_struct *vma,
+					struct mempolicy *new)
+{
+	return -EINVAL;
+}
+
+static inline void mpol_shared_policy_init(struct shared_policy *info)
+{
+}
+
+static inline void mpol_free_shared_policy(struct shared_policy *p)
+{
+}
+
+static inline struct mempolicy *
+mpol_shared_policy_lookup(struct shared_policy *sp, unsigned long idx)
+{
+	return NULL;
+}
+
+#define vma_policy(vma) NULL
+#define vma_set_policy(vma, pol) do {} while(0)
+
+static inline void numa_policy_init(void)
+{
+}
+
+static inline void numa_default_policy(void)
+{
+}
+
+#endif /* CONFIG_NUMA */
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/mempool.h b/include/linux/mempool.h
new file mode 100644
index 000000000000..4a36edf1c974
--- /dev/null
+++ b/include/linux/mempool.h
@@ -0,0 +1,37 @@
+/*
+ * memory buffer pool support
+ */
+#ifndef _LINUX_MEMPOOL_H
+#define _LINUX_MEMPOOL_H
+
+#include <linux/wait.h>
+
+typedef void * (mempool_alloc_t)(unsigned int __nocast gfp_mask, void *pool_data);
+typedef void (mempool_free_t)(void *element, void *pool_data);
+
+typedef struct mempool_s {
+	spinlock_t lock;
+	int min_nr;		/* nr of elements at *elements */
+	int curr_nr;		/* Current nr of elements at *elements */
+	void **elements;
+
+	void *pool_data;
+	mempool_alloc_t *alloc;
+	mempool_free_t *free;
+	wait_queue_head_t wait;
+} mempool_t;
+extern mempool_t * mempool_create(int min_nr, mempool_alloc_t *alloc_fn,
+				 mempool_free_t *free_fn, void *pool_data);
+extern int mempool_resize(mempool_t *pool, int new_min_nr, unsigned int __nocast gfp_mask);
+extern void mempool_destroy(mempool_t *pool);
+extern void * mempool_alloc(mempool_t *pool, unsigned int __nocast gfp_mask);
+extern void mempool_free(void *element, mempool_t *pool);
+
+/*
+ * A mempool_alloc_t and mempool_free_t that get the memory from
+ * a slab that is passed in through pool_data.
+ */
+void *mempool_alloc_slab(unsigned int __nocast gfp_mask, void *pool_data);
+void mempool_free_slab(void *element, void *pool_data);
+
+#endif /* _LINUX_MEMPOOL_H */
diff --git a/include/linux/meye.h b/include/linux/meye.h
new file mode 100644
index 000000000000..11ec45e9a132
--- /dev/null
+++ b/include/linux/meye.h
@@ -0,0 +1,66 @@
+/*
+ * Motion Eye video4linux driver for Sony Vaio PictureBook
+ *
+ * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * Some parts borrowed from various video4linux drivers, especially
+ * bttv-driver.c and zoran.c, see original files for credits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _MEYE_H_
+#define _MEYE_H_
+
+/****************************************************************************/
+/* Private API for handling mjpeg capture / playback.                       */
+/****************************************************************************/
+
+struct meye_params {
+	unsigned char subsample;
+	unsigned char quality;
+	unsigned char sharpness;
+	unsigned char agc;
+	unsigned char picture;
+	unsigned char framerate;
+};
+
+/* query the extended parameters */
+#define MEYEIOC_G_PARAMS	_IOR ('v', BASE_VIDIOCPRIVATE+0, struct meye_params)
+/* set the extended parameters */
+#define MEYEIOC_S_PARAMS	_IOW ('v', BASE_VIDIOCPRIVATE+1, struct meye_params)
+/* queue a buffer for mjpeg capture */
+#define MEYEIOC_QBUF_CAPT	_IOW ('v', BASE_VIDIOCPRIVATE+2, int)
+/* sync a previously queued mjpeg buffer */
+#define MEYEIOC_SYNC		_IOWR('v', BASE_VIDIOCPRIVATE+3, int)
+/* get a still uncompressed snapshot */
+#define MEYEIOC_STILLCAPT	_IO  ('v', BASE_VIDIOCPRIVATE+4)
+/* get a jpeg compressed snapshot */
+#define MEYEIOC_STILLJCAPT	_IOR ('v', BASE_VIDIOCPRIVATE+5, int)
+
+/* V4L2 private controls */
+#define V4L2_CID_AGC		V4L2_CID_PRIVATE_BASE
+#define V4L2_CID_SHARPNESS	(V4L2_CID_PRIVATE_BASE + 1)
+#define V4L2_CID_PICTURE	(V4L2_CID_PRIVATE_BASE + 2)
+#define V4L2_CID_JPEGQUAL	(V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_FRAMERATE	(V4L2_CID_PRIVATE_BASE + 4)
+
+#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
new file mode 100644
index 000000000000..20971fe78a8d
--- /dev/null
+++ b/include/linux/mii.h
@@ -0,0 +1,223 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __LINUX_MII_H__
+#define __LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/if.h>
+
+/* Generic MII registers. */
+
+#define MII_BMCR            0x00        /* Basic mode control register */
+#define MII_BMSR            0x01        /* Basic mode status register  */
+#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
+#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
+#define MII_ADVERTISE       0x04        /* Advertisement control reg   */
+#define MII_LPA             0x05        /* Link partner ability reg    */
+#define MII_EXPANSION       0x06        /* Expansion register          */
+#define MII_CTRL1000        0x09        /* 1000BASE-T control          */
+#define MII_STAT1000        0x0a        /* 1000BASE-T status           */
+#define MII_DCOUNTER        0x12        /* Disconnect counter          */
+#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
+#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
+#define MII_SREVISION       0x16        /* Silicon revision            */
+#define MII_RESV1           0x17        /* Reserved...                 */
+#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
+#define MII_PHYADDR         0x19        /* PHY address                 */
+#define MII_RESV2           0x1a        /* Reserved...                 */
+#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
+#define MII_NCONFIG         0x1c        /* Network interface config    */
+
+/* Basic mode control register. */
+#define BMCR_RESV               0x003f  /* Unused...                   */
+#define BMCR_SPEED1000		0x0040  /* MSB of Speed (1000)         */
+#define BMCR_CTST               0x0080  /* Collision test              */
+#define BMCR_FULLDPLX           0x0100  /* Full duplex                 */
+#define BMCR_ANRESTART          0x0200  /* Auto negotiation restart    */
+#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
+#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
+#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
+#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
+#define BMCR_RESET              0x8000  /* Reset the DP83840           */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
+#define BMSR_JCD                0x0002  /* Jabber detected             */
+#define BMSR_LSTATUS            0x0004  /* Link status                 */
+#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
+#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
+#define BMSR_RESV               0x07c0  /* Unused...                   */
+#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
+#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
+#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
+#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP     0x0400  /* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM    0x0800  /* Try for asymetric pause     */
+#define ADVERTISE_RESV          0x1000  /* Unused...                   */
+#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
+#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
+#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
+
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
+			ADVERTISE_CSMA)
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+                       ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT                0x001f  /* Same as advertise selector  */
+#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
+#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
+#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
+#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
+#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP           0x0400  /* Can pause                   */
+#define LPA_PAUSE_ASYM          0x0800  /* Can pause asymetrically     */
+#define LPA_RESV                0x1000  /* Unused...                   */
+#define LPA_RFAULT              0x2000  /* Link partner faulted        */
+#define LPA_LPACK               0x4000  /* Link partner acked us       */
+#define LPA_NPAGE               0x8000  /* Next page bit               */
+
+#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
+#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
+#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
+#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
+#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
+#define EXPANSION_RESV          0xffe0  /* Unused...                   */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
+#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
+#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL      0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF      0x0100  /* Advertise 1000BASE-T half duplex */
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK       0x2000  /* Link partner local receiver status */
+#define LPA_1000REMRXOK         0x1000  /* Link partner remote receiver status */
+#define LPA_1000FULL            0x0800  /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF            0x0400  /* Link partner 1000BASE-T half duplex */
+
+struct mii_if_info {
+	int phy_id;
+	int advertising;
+	int phy_id_mask;
+	int reg_num_mask;
+
+	unsigned int full_duplex : 1;	/* is full duplex? */
+	unsigned int force_media : 1;	/* is autoneg. disabled? */
+	unsigned int supports_gmii : 1; /* are GMII registers supported? */
+
+	struct net_device *dev;
+	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
+	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
+};
+
+struct ethtool_cmd;
+struct mii_ioctl_data;
+
+extern int mii_link_ok (struct mii_if_info *mii);
+extern int mii_nway_restart (struct mii_if_info *mii);
+extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+extern void mii_check_link (struct mii_if_info *mii);
+extern unsigned int mii_check_media (struct mii_if_info *mii,
+				     unsigned int ok_to_print,
+				     unsigned int init_media);
+extern int generic_mii_ioctl(struct mii_if_info *mii_if,
+                      	     struct mii_ioctl_data *mii_data, int cmd,
+			     unsigned int *duplex_changed);
+
+
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+	u16		phy_id;
+	u16		reg_num;
+	u16		val_in;
+	u16		val_out;
+};
+
+
+static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
+{
+	return (struct mii_ioctl_data *) &rq->ifr_ifru;
+}
+
+
+/**
+ * mii_nway_result
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * Given a set of MII abilities, check each bit and returns the
+ * currently supported media, in the priority order defined by
+ * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
+ * value of LPA solely, as described above.
+ *
+ * The one exception to IEEE 802.3u is that 100baseT4 is placed
+ * between 100T-full and 100T-half.  If your phy does not support
+ * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
+ * priority order, you will need to roll your own function.
+ */
+static inline unsigned int mii_nway_result (unsigned int negotiated)
+{
+	unsigned int ret;
+
+	if (negotiated & LPA_100FULL)
+		ret = LPA_100FULL;
+	else if (negotiated & LPA_100BASE4)
+		ret = LPA_100BASE4;
+	else if (negotiated & LPA_100HALF)
+		ret = LPA_100HALF;
+	else if (negotiated & LPA_10FULL)
+		ret = LPA_10FULL;
+	else
+		ret = LPA_10HALF;
+
+	return ret;
+}
+
+/**
+ * mii_duplex
+ * @duplex_lock: Non-zero if duplex is locked at full
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * A small helper function for a common case.  Returns one
+ * if the media is operating or locked at full duplex, and
+ * returns zero otherwise.
+ */
+static inline unsigned int mii_duplex (unsigned int duplex_lock,
+				       unsigned int negotiated)
+{
+	if (duplex_lock)
+		return 1;
+	if (mii_nway_result(negotiated) & LPA_DUPLEX)
+		return 1;
+	return 0;
+}
+
+
+#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h
new file mode 100644
index 000000000000..1ecc3cc8cef5
--- /dev/null
+++ b/include/linux/minix_fs.h
@@ -0,0 +1,85 @@
+#ifndef _LINUX_MINIX_FS_H
+#define _LINUX_MINIX_FS_H
+
+/*
+ * The minix filesystem constants/structures
+ */
+
+/*
+ * Thanks to Kees J Bot for sending me the definitions of the new
+ * minix filesystem (aka V2) with bigger inodes and 32-bit block
+ * pointers.
+ */
+
+#define MINIX_ROOT_INO 1
+
+/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
+#define MINIX_LINK_MAX	250
+#define MINIX2_LINK_MAX	65530
+
+#define MINIX_I_MAP_SLOTS	8
+#define MINIX_Z_MAP_SLOTS	64
+#define MINIX_SUPER_MAGIC	0x137F		/* original minix fs */
+#define MINIX_SUPER_MAGIC2	0x138F		/* minix fs, 30 char names */
+#define MINIX2_SUPER_MAGIC	0x2468		/* minix V2 fs */
+#define MINIX2_SUPER_MAGIC2	0x2478		/* minix V2 fs, 30 char names */
+#define MINIX_VALID_FS		0x0001		/* Clean fs. */
+#define MINIX_ERROR_FS		0x0002		/* fs has errors. */
+
+#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
+#define MINIX2_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix2_inode)))
+
+/*
+ * This is the original minix inode layout on disk.
+ * Note the 8-bit gid and atime and ctime.
+ */
+struct minix_inode {
+	__u16 i_mode;
+	__u16 i_uid;
+	__u32 i_size;
+	__u32 i_time;
+	__u8  i_gid;
+	__u8  i_nlinks;
+	__u16 i_zone[9];
+};
+
+/*
+ * The new minix inode has all the time entries, as well as
+ * long block numbers and a third indirect block (7+1+1+1
+ * instead of 7+1+1). Also, some previously 8-bit values are
+ * now 16-bit. The inode is now 64 bytes instead of 32.
+ */
+struct minix2_inode {
+	__u16 i_mode;
+	__u16 i_nlinks;
+	__u16 i_uid;
+	__u16 i_gid;
+	__u32 i_size;
+	__u32 i_atime;
+	__u32 i_mtime;
+	__u32 i_ctime;
+	__u32 i_zone[10];
+};
+
+/*
+ * minix super-block data on disk
+ */
+struct minix_super_block {
+	__u16 s_ninodes;
+	__u16 s_nzones;
+	__u16 s_imap_blocks;
+	__u16 s_zmap_blocks;
+	__u16 s_firstdatazone;
+	__u16 s_log_zone_size;
+	__u32 s_max_size;
+	__u16 s_magic;
+	__u16 s_state;
+	__u32 s_zones;
+};
+
+struct minix_dir_entry {
+	__u16 inode;
+	char name[0];
+};
+
+#endif
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
new file mode 100644
index 000000000000..14ceebfc1efa
--- /dev/null
+++ b/include/linux/miscdevice.h
@@ -0,0 +1,52 @@
+#ifndef _LINUX_MISCDEVICE_H
+#define _LINUX_MISCDEVICE_H
+#include <linux/module.h>
+#include <linux/major.h>
+
+#define PSMOUSE_MINOR  1
+#define MS_BUSMOUSE_MINOR 2
+#define ATIXL_BUSMOUSE_MINOR 3
+/*#define AMIGAMOUSE_MINOR 4	FIXME OBSOLETE */
+#define ATARIMOUSE_MINOR 5
+#define SUN_MOUSE_MINOR 6
+#define APOLLO_MOUSE_MINOR 7
+#define PC110PAD_MINOR 9
+/*#define ADB_MOUSE_MINOR 10	FIXME OBSOLETE */
+#define WATCHDOG_MINOR		130	/* Watchdog timer     */
+#define TEMP_MINOR		131	/* Temperature Sensor */
+#define RTC_MINOR 135
+#define EFI_RTC_MINOR		136	/* EFI Time services */
+#define SUN_OPENPROM_MINOR 139
+#define DMAPI_MINOR		140	/* DMAPI */
+#define NVRAM_MINOR 144
+#define SGI_MMTIMER        153
+#define STORE_QUEUE_MINOR	155
+#define I2O_MINOR 166
+#define MICROCODE_MINOR		184
+#define MWAVE_MINOR	219		/* ACP/Mwave Modem */
+#define MPT_MINOR	220
+#define MISC_DYNAMIC_MINOR 255
+
+#define TUN_MINOR	     200
+#define	HPET_MINOR	     228
+
+struct device;
+struct class_device;
+
+struct miscdevice  {
+	int minor;
+	const char *name;
+	struct file_operations *fops;
+	struct list_head list;
+	struct device *dev;
+	struct class_device *class;
+	char devfs_name[64];
+};
+
+extern int misc_register(struct miscdevice * misc);
+extern int misc_deregister(struct miscdevice * misc);
+
+#define MODULE_ALIAS_MISCDEV(minor)				\
+	MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR)	\
+	"-" __stringify(minor))
+#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
new file mode 100644
index 000000000000..6a931374d6c4
--- /dev/null
+++ b/include/linux/mm.h
@@ -0,0 +1,861 @@
+#ifndef _LINUX_MM_H
+#define _LINUX_MM_H
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/mmzone.h>
+#include <linux/rbtree.h>
+#include <linux/prio_tree.h>
+#include <linux/fs.h>
+
+struct mempolicy;
+struct anon_vma;
+
+#ifndef CONFIG_DISCONTIGMEM          /* Don't use mapnrs, do it properly */
+extern unsigned long max_mapnr;
+#endif
+
+extern unsigned long num_physpages;
+extern void * high_memory;
+extern unsigned long vmalloc_earlyreserve;
+extern int page_cluster;
+
+#ifdef CONFIG_SYSCTL
+extern int sysctl_legacy_va_layout;
+#else
+#define sysctl_legacy_va_layout 0
+#endif
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+
+#ifndef MM_VM_SIZE
+#define MM_VM_SIZE(mm)	((TASK_SIZE + PGDIR_SIZE - 1) & PGDIR_MASK)
+#endif
+
+#define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
+
+/*
+ * Linux kernel virtual memory manager primitives.
+ * The idea being to have a "virtual" mm in the same way
+ * we have a virtual fs - giving a cleaner interface to the
+ * mm details, and allowing different kinds of memory mappings
+ * (from shared memory to executable loading to arbitrary
+ * mmap() functions).
+ */
+
+/*
+ * This struct defines a memory VMM memory area. There is one of these
+ * per VM-area/task.  A VM area is any part of the process virtual memory
+ * space that has a special rule for the page-fault handlers (ie a shared
+ * library, the executable area etc).
+ */
+struct vm_area_struct {
+	struct mm_struct * vm_mm;	/* The address space we belong to. */
+	unsigned long vm_start;		/* Our start address within vm_mm. */
+	unsigned long vm_end;		/* The first byte after our end address
+					   within vm_mm. */
+
+	/* linked list of VM areas per task, sorted by address */
+	struct vm_area_struct *vm_next;
+
+	pgprot_t vm_page_prot;		/* Access permissions of this VMA. */
+	unsigned long vm_flags;		/* Flags, listed below. */
+
+	struct rb_node vm_rb;
+
+	/*
+	 * For areas with an address space and backing store,
+	 * linkage into the address_space->i_mmap prio tree, or
+	 * linkage to the list of like vmas hanging off its node, or
+	 * linkage of vma in the address_space->i_mmap_nonlinear list.
+	 */
+	union {
+		struct {
+			struct list_head list;
+			void *parent;	/* aligns with prio_tree_node parent */
+			struct vm_area_struct *head;
+		} vm_set;
+
+		struct raw_prio_tree_node prio_tree_node;
+	} shared;
+
+	/*
+	 * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma
+	 * list, after a COW of one of the file pages.  A MAP_SHARED vma
+	 * can only be in the i_mmap tree.  An anonymous MAP_PRIVATE, stack
+	 * or brk vma (with NULL file) can only be in an anon_vma list.
+	 */
+	struct list_head anon_vma_node;	/* Serialized by anon_vma->lock */
+	struct anon_vma *anon_vma;	/* Serialized by page_table_lock */
+
+	/* Function pointers to deal with this struct. */
+	struct vm_operations_struct * vm_ops;
+
+	/* Information about our backing store: */
+	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
+					   units, *not* PAGE_CACHE_SIZE */
+	struct file * vm_file;		/* File we map to (can be NULL). */
+	void * vm_private_data;		/* was vm_pte (shared mem) */
+	unsigned long vm_truncate_count;/* truncate_count or restart_addr */
+
+#ifndef CONFIG_MMU
+	atomic_t vm_usage;		/* refcount (VMAs shared if !MMU) */
+#endif
+#ifdef CONFIG_NUMA
+	struct mempolicy *vm_policy;	/* NUMA policy for the VMA */
+#endif
+};
+
+/*
+ * This struct defines the per-mm list of VMAs for uClinux. If CONFIG_MMU is
+ * disabled, then there's a single shared list of VMAs maintained by the
+ * system, and mm's subscribe to these individually
+ */
+struct vm_list_struct {
+	struct vm_list_struct	*next;
+	struct vm_area_struct	*vma;
+};
+
+#ifndef CONFIG_MMU
+extern struct rb_root nommu_vma_tree;
+extern struct rw_semaphore nommu_vma_sem;
+
+extern unsigned int kobjsize(const void *objp);
+#endif
+
+/*
+ * vm_flags..
+ */
+#define VM_READ		0x00000001	/* currently active flags */
+#define VM_WRITE	0x00000002
+#define VM_EXEC		0x00000004
+#define VM_SHARED	0x00000008
+
+#define VM_MAYREAD	0x00000010	/* limits for mprotect() etc */
+#define VM_MAYWRITE	0x00000020
+#define VM_MAYEXEC	0x00000040
+#define VM_MAYSHARE	0x00000080
+
+#define VM_GROWSDOWN	0x00000100	/* general info on the segment */
+#define VM_GROWSUP	0x00000200
+#define VM_SHM		0x00000400	/* shared memory area, don't swap out */
+#define VM_DENYWRITE	0x00000800	/* ETXTBSY on write attempts.. */
+
+#define VM_EXECUTABLE	0x00001000
+#define VM_LOCKED	0x00002000
+#define VM_IO           0x00004000	/* Memory mapped I/O or similar */
+
+					/* Used by sys_madvise() */
+#define VM_SEQ_READ	0x00008000	/* App will access data sequentially */
+#define VM_RAND_READ	0x00010000	/* App will not benefit from clustered reads */
+
+#define VM_DONTCOPY	0x00020000      /* Do not copy this vma on fork */
+#define VM_DONTEXPAND	0x00040000	/* Cannot expand with mremap() */
+#define VM_RESERVED	0x00080000	/* Don't unmap it from swap_out */
+#define VM_ACCOUNT	0x00100000	/* Is a VM accounted object */
+#define VM_HUGETLB	0x00400000	/* Huge TLB Page VM */
+#define VM_NONLINEAR	0x00800000	/* Is non-linear (remap_file_pages) */
+#define VM_MAPPED_COPY	0x01000000	/* T if mapped copy of data (nommu mmap) */
+
+#ifndef VM_STACK_DEFAULT_FLAGS		/* arch can override this */
+#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
+#endif
+
+#ifdef CONFIG_STACK_GROWSUP
+#define VM_STACK_FLAGS	(VM_GROWSUP | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
+#else
+#define VM_STACK_FLAGS	(VM_GROWSDOWN | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
+#endif
+
+#define VM_READHINTMASK			(VM_SEQ_READ | VM_RAND_READ)
+#define VM_ClearReadHint(v)		(v)->vm_flags &= ~VM_READHINTMASK
+#define VM_NormalReadHint(v)		(!((v)->vm_flags & VM_READHINTMASK))
+#define VM_SequentialReadHint(v)	((v)->vm_flags & VM_SEQ_READ)
+#define VM_RandomReadHint(v)		((v)->vm_flags & VM_RAND_READ)
+
+/*
+ * mapping from the currently active vm_flags protection bits (the
+ * low four bits) to a page protection mask..
+ */
+extern pgprot_t protection_map[16];
+
+
+/*
+ * These are the virtual MM functions - opening of an area, closing and
+ * unmapping it (needed to keep files on disk up-to-date etc), pointer
+ * to the functions called when a no-page or a wp-page exception occurs. 
+ */
+struct vm_operations_struct {
+	void (*open)(struct vm_area_struct * area);
+	void (*close)(struct vm_area_struct * area);
+	struct page * (*nopage)(struct vm_area_struct * area, unsigned long address, int *type);
+	int (*populate)(struct vm_area_struct * area, unsigned long address, unsigned long len, pgprot_t prot, unsigned long pgoff, int nonblock);
+#ifdef CONFIG_NUMA
+	int (*set_policy)(struct vm_area_struct *vma, struct mempolicy *new);
+	struct mempolicy *(*get_policy)(struct vm_area_struct *vma,
+					unsigned long addr);
+#endif
+};
+
+struct mmu_gather;
+struct inode;
+
+#ifdef ARCH_HAS_ATOMIC_UNSIGNED
+typedef unsigned page_flags_t;
+#else
+typedef unsigned long page_flags_t;
+#endif
+
+/*
+ * Each physical page in the system has a struct page associated with
+ * it to keep track of whatever it is we are using the page for at the
+ * moment. Note that we have no way to track which tasks are using
+ * a page.
+ */
+struct page {
+	page_flags_t flags;		/* Atomic flags, some possibly
+					 * updated asynchronously */
+	atomic_t _count;		/* Usage count, see below. */
+	atomic_t _mapcount;		/* Count of ptes mapped in mms,
+					 * to show when page is mapped
+					 * & limit reverse map searches.
+					 */
+	unsigned long private;		/* Mapping-private opaque data:
+					 * usually used for buffer_heads
+					 * if PagePrivate set; used for
+					 * swp_entry_t if PageSwapCache
+					 * When page is free, this indicates
+					 * order in the buddy system.
+					 */
+	struct address_space *mapping;	/* If low bit clear, points to
+					 * inode address_space, or NULL.
+					 * If page mapped as anonymous
+					 * memory, low bit is set, and
+					 * it points to anon_vma object:
+					 * see PAGE_MAPPING_ANON below.
+					 */
+	pgoff_t index;			/* Our offset within mapping. */
+	struct list_head lru;		/* Pageout list, eg. active_list
+					 * protected by zone->lru_lock !
+					 */
+	/*
+	 * On machines where all RAM is mapped into kernel address space,
+	 * we can simply calculate the virtual address. On machines with
+	 * highmem some memory is mapped into kernel virtual memory
+	 * dynamically, so we need a place to store that address.
+	 * Note that this field could be 16 bits on x86 ... ;)
+	 *
+	 * Architectures with slow multiplication can define
+	 * WANT_PAGE_VIRTUAL in asm/page.h
+	 */
+#if defined(WANT_PAGE_VIRTUAL)
+	void *virtual;			/* Kernel virtual address (NULL if
+					   not kmapped, ie. highmem) */
+#endif /* WANT_PAGE_VIRTUAL */
+};
+
+/*
+ * FIXME: take this include out, include page-flags.h in
+ * files which need it (119 of them)
+ */
+#include <linux/page-flags.h>
+
+/*
+ * Methods to modify the page usage count.
+ *
+ * What counts for a page usage:
+ * - cache mapping   (page->mapping)
+ * - private data    (page->private)
+ * - page mapped in a task's page tables, each mapping
+ *   is counted separately
+ *
+ * Also, many kernel routines increase the page count before a critical
+ * routine so they can be sure the page doesn't go away from under them.
+ *
+ * Since 2.6.6 (approx), a free page has ->_count = -1.  This is so that we
+ * can use atomic_add_negative(-1, page->_count) to detect when the page
+ * becomes free and so that we can also use atomic_inc_and_test to atomically
+ * detect when we just tried to grab a ref on a page which some other CPU has
+ * already deemed to be freeable.
+ *
+ * NO code should make assumptions about this internal detail!  Use the provided
+ * macros which retain the old rules: page_count(page) == 0 is a free page.
+ */
+
+/*
+ * Drop a ref, return true if the logical refcount fell to zero (the page has
+ * no users)
+ */
+#define put_page_testzero(p)				\
+	({						\
+		BUG_ON(page_count(p) == 0);		\
+		atomic_add_negative(-1, &(p)->_count);	\
+	})
+
+/*
+ * Grab a ref, return true if the page previously had a logical refcount of
+ * zero.  ie: returns true if we just grabbed an already-deemed-to-be-free page
+ */
+#define get_page_testone(p)	atomic_inc_and_test(&(p)->_count)
+
+#define set_page_count(p,v) 	atomic_set(&(p)->_count, v - 1)
+#define __put_page(p)		atomic_dec(&(p)->_count)
+
+extern void FASTCALL(__page_cache_release(struct page *));
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+static inline int page_count(struct page *p)
+{
+	if (PageCompound(p))
+		p = (struct page *)p->private;
+	return atomic_read(&(p)->_count) + 1;
+}
+
+static inline void get_page(struct page *page)
+{
+	if (unlikely(PageCompound(page)))
+		page = (struct page *)page->private;
+	atomic_inc(&page->_count);
+}
+
+void put_page(struct page *page);
+
+#else		/* CONFIG_HUGETLB_PAGE */
+
+#define page_count(p)		(atomic_read(&(p)->_count) + 1)
+
+static inline void get_page(struct page *page)
+{
+	atomic_inc(&page->_count);
+}
+
+static inline void put_page(struct page *page)
+{
+	if (!PageReserved(page) && put_page_testzero(page))
+		__page_cache_release(page);
+}
+
+#endif		/* CONFIG_HUGETLB_PAGE */
+
+/*
+ * Multiple processes may "see" the same page. E.g. for untouched
+ * mappings of /dev/null, all processes see the same page full of
+ * zeroes, and text pages of executables and shared libraries have
+ * only one copy in memory, at most, normally.
+ *
+ * For the non-reserved pages, page_count(page) denotes a reference count.
+ *   page_count() == 0 means the page is free.
+ *   page_count() == 1 means the page is used for exactly one purpose
+ *   (e.g. a private data page of one process).
+ *
+ * A page may be used for kmalloc() or anyone else who does a
+ * __get_free_page(). In this case the page_count() is at least 1, and
+ * all other fields are unused but should be 0 or NULL. The
+ * management of this page is the responsibility of the one who uses
+ * it.
+ *
+ * The other pages (we may call them "process pages") are completely
+ * managed by the Linux memory manager: I/O, buffers, swapping etc.
+ * The following discussion applies only to them.
+ *
+ * A page may belong to an inode's memory mapping. In this case,
+ * page->mapping is the pointer to the inode, and page->index is the
+ * file offset of the page, in units of PAGE_CACHE_SIZE.
+ *
+ * A page contains an opaque `private' member, which belongs to the
+ * page's address_space.  Usually, this is the address of a circular
+ * list of the page's disk buffers.
+ *
+ * For pages belonging to inodes, the page_count() is the number of
+ * attaches, plus 1 if `private' contains something, plus one for
+ * the page cache itself.
+ *
+ * All pages belonging to an inode are in these doubly linked lists:
+ * mapping->clean_pages, mapping->dirty_pages and mapping->locked_pages;
+ * using the page->list list_head. These fields are also used for
+ * freelist managemet (when page_count()==0).
+ *
+ * There is also a per-mapping radix tree mapping index to the page
+ * in memory if present. The tree is rooted at mapping->root.  
+ *
+ * All process pages can do I/O:
+ * - inode pages may need to be read from disk,
+ * - inode pages which have been modified and are MAP_SHARED may need
+ *   to be written to disk,
+ * - private pages which have been modified may need to be swapped out
+ *   to swap space and (later) to be read back into memory.
+ */
+
+/*
+ * The zone field is never updated after free_area_init_core()
+ * sets it, so none of the operations on it need to be atomic.
+ * We'll have up to (MAX_NUMNODES * MAX_NR_ZONES) zones total,
+ * so we use (MAX_NODES_SHIFT + MAX_ZONES_SHIFT) here to get enough bits.
+ */
+#define NODEZONE_SHIFT (sizeof(page_flags_t)*8 - MAX_NODES_SHIFT - MAX_ZONES_SHIFT)
+#define NODEZONE(node, zone)	((node << ZONES_SHIFT) | zone)
+
+static inline unsigned long page_zonenum(struct page *page)
+{
+	return (page->flags >> NODEZONE_SHIFT) & (~(~0UL << ZONES_SHIFT));
+}
+static inline unsigned long page_to_nid(struct page *page)
+{
+	return (page->flags >> (NODEZONE_SHIFT + ZONES_SHIFT));
+}
+
+struct zone;
+extern struct zone *zone_table[];
+
+static inline struct zone *page_zone(struct page *page)
+{
+	return zone_table[page->flags >> NODEZONE_SHIFT];
+}
+
+static inline void set_page_zone(struct page *page, unsigned long nodezone_num)
+{
+	page->flags &= ~(~0UL << NODEZONE_SHIFT);
+	page->flags |= nodezone_num << NODEZONE_SHIFT;
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+/* The array of struct pages - for discontigmem use pgdat->lmem_map */
+extern struct page *mem_map;
+#endif
+
+static inline void *lowmem_page_address(struct page *page)
+{
+	return __va(page_to_pfn(page) << PAGE_SHIFT);
+}
+
+#if defined(CONFIG_HIGHMEM) && !defined(WANT_PAGE_VIRTUAL)
+#define HASHED_PAGE_VIRTUAL
+#endif
+
+#if defined(WANT_PAGE_VIRTUAL)
+#define page_address(page) ((page)->virtual)
+#define set_page_address(page, address)			\
+	do {						\
+		(page)->virtual = (address);		\
+	} while(0)
+#define page_address_init()  do { } while(0)
+#endif
+
+#if defined(HASHED_PAGE_VIRTUAL)
+void *page_address(struct page *page);
+void set_page_address(struct page *page, void *virtual);
+void page_address_init(void);
+#endif
+
+#if !defined(HASHED_PAGE_VIRTUAL) && !defined(WANT_PAGE_VIRTUAL)
+#define page_address(page) lowmem_page_address(page)
+#define set_page_address(page, address)  do { } while(0)
+#define page_address_init()  do { } while(0)
+#endif
+
+/*
+ * On an anonymous page mapped into a user virtual memory area,
+ * page->mapping points to its anon_vma, not to a struct address_space;
+ * with the PAGE_MAPPING_ANON bit set to distinguish it.
+ *
+ * Please note that, confusingly, "page_mapping" refers to the inode
+ * address_space which maps the page from disk; whereas "page_mapped"
+ * refers to user virtual address space into which the page is mapped.
+ */
+#define PAGE_MAPPING_ANON	1
+
+extern struct address_space swapper_space;
+static inline struct address_space *page_mapping(struct page *page)
+{
+	struct address_space *mapping = page->mapping;
+
+	if (unlikely(PageSwapCache(page)))
+		mapping = &swapper_space;
+	else if (unlikely((unsigned long)mapping & PAGE_MAPPING_ANON))
+		mapping = NULL;
+	return mapping;
+}
+
+static inline int PageAnon(struct page *page)
+{
+	return ((unsigned long)page->mapping & PAGE_MAPPING_ANON) != 0;
+}
+
+/*
+ * Return the pagecache index of the passed page.  Regular pagecache pages
+ * use ->index whereas swapcache pages use ->private
+ */
+static inline pgoff_t page_index(struct page *page)
+{
+	if (unlikely(PageSwapCache(page)))
+		return page->private;
+	return page->index;
+}
+
+/*
+ * The atomic page->_mapcount, like _count, starts from -1:
+ * so that transitions both from it and to it can be tracked,
+ * using atomic_inc_and_test and atomic_add_negative(-1).
+ */
+static inline void reset_page_mapcount(struct page *page)
+{
+	atomic_set(&(page)->_mapcount, -1);
+}
+
+static inline int page_mapcount(struct page *page)
+{
+	return atomic_read(&(page)->_mapcount) + 1;
+}
+
+/*
+ * Return true if this page is mapped into pagetables.
+ */
+static inline int page_mapped(struct page *page)
+{
+	return atomic_read(&(page)->_mapcount) >= 0;
+}
+
+/*
+ * Error return values for the *_nopage functions
+ */
+#define NOPAGE_SIGBUS	(NULL)
+#define NOPAGE_OOM	((struct page *) (-1))
+
+/*
+ * Different kinds of faults, as returned by handle_mm_fault().
+ * Used to decide whether a process gets delivered SIGBUS or
+ * just gets major/minor fault counters bumped up.
+ */
+#define VM_FAULT_OOM	(-1)
+#define VM_FAULT_SIGBUS	0
+#define VM_FAULT_MINOR	1
+#define VM_FAULT_MAJOR	2
+
+#define offset_in_page(p)	((unsigned long)(p) & ~PAGE_MASK)
+
+extern void show_free_areas(void);
+
+#ifdef CONFIG_SHMEM
+struct page *shmem_nopage(struct vm_area_struct *vma,
+			unsigned long address, int *type);
+int shmem_set_policy(struct vm_area_struct *vma, struct mempolicy *new);
+struct mempolicy *shmem_get_policy(struct vm_area_struct *vma,
+					unsigned long addr);
+int shmem_lock(struct file *file, int lock, struct user_struct *user);
+#else
+#define shmem_nopage filemap_nopage
+#define shmem_lock(a, b, c) 	({0;})	/* always in memory, no need to lock */
+#define shmem_set_policy(a, b)	(0)
+#define shmem_get_policy(a, b)	(NULL)
+#endif
+struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
+
+int shmem_zero_setup(struct vm_area_struct *);
+
+static inline int can_do_mlock(void)
+{
+	if (capable(CAP_IPC_LOCK))
+		return 1;
+	if (current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur != 0)
+		return 1;
+	return 0;
+}
+extern int user_shm_lock(size_t, struct user_struct *);
+extern void user_shm_unlock(size_t, struct user_struct *);
+
+/*
+ * Parameter block passed down to zap_pte_range in exceptional cases.
+ */
+struct zap_details {
+	struct vm_area_struct *nonlinear_vma;	/* Check page->index if set */
+	struct address_space *check_mapping;	/* Check page->mapping if set */
+	pgoff_t	first_index;			/* Lowest page->index to unmap */
+	pgoff_t last_index;			/* Highest page->index to unmap */
+	spinlock_t *i_mmap_lock;		/* For unmap_mapping_range: */
+	unsigned long break_addr;		/* Where unmap_vmas stopped */
+	unsigned long truncate_count;		/* Compare vm_truncate_count */
+};
+
+void zap_page_range(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size, struct zap_details *);
+int unmap_vmas(struct mmu_gather **tlbp, struct mm_struct *mm,
+		struct vm_area_struct *start_vma, unsigned long start_addr,
+		unsigned long end_addr, unsigned long *nr_accounted,
+		struct zap_details *);
+void clear_page_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end);
+int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
+			struct vm_area_struct *vma);
+int zeromap_page_range(struct vm_area_struct *vma, unsigned long from,
+			unsigned long size, pgprot_t prot);
+void unmap_mapping_range(struct address_space *mapping,
+		loff_t const holebegin, loff_t const holelen, int even_cows);
+
+static inline void unmap_shared_mapping_range(struct address_space *mapping,
+		loff_t const holebegin, loff_t const holelen)
+{
+	unmap_mapping_range(mapping, holebegin, holelen, 0);
+}
+
+extern int vmtruncate(struct inode * inode, loff_t offset);
+extern pud_t *FASTCALL(__pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address));
+extern pmd_t *FASTCALL(__pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address));
+extern pte_t *FASTCALL(pte_alloc_kernel(struct mm_struct *mm, pmd_t *pmd, unsigned long address));
+extern pte_t *FASTCALL(pte_alloc_map(struct mm_struct *mm, pmd_t *pmd, unsigned long address));
+extern int install_page(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, struct page *page, pgprot_t prot);
+extern int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, unsigned long pgoff, pgprot_t prot);
+extern int handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma, unsigned long address, int write_access);
+extern int make_pages_present(unsigned long addr, unsigned long end);
+extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
+void install_arg_page(struct vm_area_struct *, struct page *, unsigned long);
+
+int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
+		int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
+
+int __set_page_dirty_buffers(struct page *page);
+int __set_page_dirty_nobuffers(struct page *page);
+int redirty_page_for_writepage(struct writeback_control *wbc,
+				struct page *page);
+int FASTCALL(set_page_dirty(struct page *page));
+int set_page_dirty_lock(struct page *page);
+int clear_page_dirty_for_io(struct page *page);
+
+extern unsigned long do_mremap(unsigned long addr,
+			       unsigned long old_len, unsigned long new_len,
+			       unsigned long flags, unsigned long new_addr);
+
+/*
+ * Prototype to add a shrinker callback for ageable caches.
+ * 
+ * These functions are passed a count `nr_to_scan' and a gfpmask.  They should
+ * scan `nr_to_scan' objects, attempting to free them.
+ *
+ * The callback must the number of objects which remain in the cache.
+ *
+ * The callback will be passes nr_to_scan == 0 when the VM is querying the
+ * cache size, so a fastpath for that case is appropriate.
+ */
+typedef int (*shrinker_t)(int nr_to_scan, unsigned int gfp_mask);
+
+/*
+ * Add an aging callback.  The int is the number of 'seeks' it takes
+ * to recreate one of the objects that these functions age.
+ */
+
+#define DEFAULT_SEEKS 2
+struct shrinker;
+extern struct shrinker *set_shrinker(int, shrinker_t);
+extern void remove_shrinker(struct shrinker *shrinker);
+
+/*
+ * On a two-level or three-level page table, this ends up being trivial. Thus
+ * the inlining and the symmetry break with pte_alloc_map() that does all
+ * of this out-of-line.
+ */
+/*
+ * The following ifdef needed to get the 4level-fixup.h header to work.
+ * Remove it when 4level-fixup.h has been removed.
+ */
+#ifdef CONFIG_MMU
+#ifndef __ARCH_HAS_4LEVEL_HACK 
+static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
+{
+	if (pgd_none(*pgd))
+		return __pud_alloc(mm, pgd, address);
+	return pud_offset(pgd, address);
+}
+
+static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
+{
+	if (pud_none(*pud))
+		return __pmd_alloc(mm, pud, address);
+	return pmd_offset(pud, address);
+}
+#endif
+#endif /* CONFIG_MMU */
+
+extern void free_area_init(unsigned long * zones_size);
+extern void free_area_init_node(int nid, pg_data_t *pgdat,
+	unsigned long * zones_size, unsigned long zone_start_pfn, 
+	unsigned long *zholes_size);
+extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long);
+extern void mem_init(void);
+extern void show_mem(void);
+extern void si_meminfo(struct sysinfo * val);
+extern void si_meminfo_node(struct sysinfo *val, int nid);
+
+/* prio_tree.c */
+void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
+void vma_prio_tree_insert(struct vm_area_struct *, struct prio_tree_root *);
+void vma_prio_tree_remove(struct vm_area_struct *, struct prio_tree_root *);
+struct vm_area_struct *vma_prio_tree_next(struct vm_area_struct *vma,
+	struct prio_tree_iter *iter);
+
+#define vma_prio_tree_foreach(vma, iter, root, begin, end)	\
+	for (prio_tree_iter_init(iter, root, begin, end), vma = NULL;	\
+		(vma = vma_prio_tree_next(vma, iter)); )
+
+static inline void vma_nonlinear_insert(struct vm_area_struct *vma,
+					struct list_head *list)
+{
+	vma->shared.vm_set.parent = NULL;
+	list_add_tail(&vma->shared.vm_set.list, list);
+}
+
+/* mmap.c */
+extern int __vm_enough_memory(long pages, int cap_sys_admin);
+extern void vma_adjust(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert);
+extern struct vm_area_struct *vma_merge(struct mm_struct *,
+	struct vm_area_struct *prev, unsigned long addr, unsigned long end,
+	unsigned long vm_flags, struct anon_vma *, struct file *, pgoff_t,
+	struct mempolicy *);
+extern struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *);
+extern int split_vma(struct mm_struct *,
+	struct vm_area_struct *, unsigned long addr, int new_below);
+extern int insert_vm_struct(struct mm_struct *, struct vm_area_struct *);
+extern void __vma_link_rb(struct mm_struct *, struct vm_area_struct *,
+	struct rb_node **, struct rb_node *);
+extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
+	unsigned long addr, unsigned long len, pgoff_t pgoff);
+extern void exit_mmap(struct mm_struct *);
+
+extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+
+extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
+	unsigned long len, unsigned long prot,
+	unsigned long flag, unsigned long pgoff);
+
+static inline unsigned long do_mmap(struct file *file, unsigned long addr,
+	unsigned long len, unsigned long prot,
+	unsigned long flag, unsigned long offset)
+{
+	unsigned long ret = -EINVAL;
+	if ((offset + PAGE_ALIGN(len)) < offset)
+		goto out;
+	if (!(offset & ~PAGE_MASK))
+		ret = do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT);
+out:
+	return ret;
+}
+
+extern int do_munmap(struct mm_struct *, unsigned long, size_t);
+
+extern unsigned long do_brk(unsigned long, unsigned long);
+
+/* filemap.c */
+extern unsigned long page_unuse(struct page *);
+extern void truncate_inode_pages(struct address_space *, loff_t);
+
+/* generic vm_area_ops exported for stackable file systems */
+extern struct page *filemap_nopage(struct vm_area_struct *, unsigned long, int *);
+extern int filemap_populate(struct vm_area_struct *, unsigned long,
+		unsigned long, pgprot_t, unsigned long, int);
+
+/* mm/page-writeback.c */
+int write_one_page(struct page *page, int wait);
+
+/* readahead.c */
+#define VM_MAX_READAHEAD	128	/* kbytes */
+#define VM_MIN_READAHEAD	16	/* kbytes (includes current page) */
+#define VM_MAX_CACHE_HIT    	256	/* max pages in a row in cache before
+					 * turning readahead off */
+
+int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
+			unsigned long offset, unsigned long nr_to_read);
+int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
+			unsigned long offset, unsigned long nr_to_read);
+unsigned long  page_cache_readahead(struct address_space *mapping,
+			  struct file_ra_state *ra,
+			  struct file *filp,
+			  unsigned long offset,
+			  unsigned long size);
+void handle_ra_miss(struct address_space *mapping, 
+		    struct file_ra_state *ra, pgoff_t offset);
+unsigned long max_sane_readahead(unsigned long nr);
+
+/* Do stack extension */
+extern int expand_stack(struct vm_area_struct * vma, unsigned long address);
+
+/* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
+extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);
+extern struct vm_area_struct * find_vma_prev(struct mm_struct * mm, unsigned long addr,
+					     struct vm_area_struct **pprev);
+
+/* Look up the first VMA which intersects the interval start_addr..end_addr-1,
+   NULL if none.  Assume start_addr < end_addr. */
+static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * mm, unsigned long start_addr, unsigned long end_addr)
+{
+	struct vm_area_struct * vma = find_vma(mm,start_addr);
+
+	if (vma && end_addr <= vma->vm_start)
+		vma = NULL;
+	return vma;
+}
+
+static inline unsigned long vma_pages(struct vm_area_struct *vma)
+{
+	return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+}
+
+extern struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr);
+
+extern struct page * vmalloc_to_page(void *addr);
+extern unsigned long vmalloc_to_pfn(void *addr);
+extern struct page * follow_page(struct mm_struct *mm, unsigned long address,
+		int write);
+extern int check_user_page_readable(struct mm_struct *mm, unsigned long address);
+int remap_pfn_range(struct vm_area_struct *, unsigned long,
+		unsigned long, unsigned long, pgprot_t);
+
+#ifdef CONFIG_PROC_FS
+void __vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
+#else
+static inline void __vm_stat_account(struct mm_struct *mm,
+			unsigned long flags, struct file *file, long pages)
+{
+}
+#endif /* CONFIG_PROC_FS */
+
+static inline void vm_stat_account(struct vm_area_struct *vma)
+{
+	__vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+							vma_pages(vma));
+}
+
+static inline void vm_stat_unaccount(struct vm_area_struct *vma)
+{
+	__vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+							-vma_pages(vma));
+}
+
+/* update per process rss and vm hiwater data */
+extern void update_mem_hiwater(struct task_struct *tsk);
+
+#ifndef CONFIG_DEBUG_PAGEALLOC
+static inline void
+kernel_map_pages(struct page *page, int numpages, int enable)
+{
+}
+#endif
+
+extern struct vm_area_struct *get_gate_vma(struct task_struct *tsk);
+#ifdef	__HAVE_ARCH_GATE_AREA
+int in_gate_area_no_task(unsigned long addr);
+int in_gate_area(struct task_struct *task, unsigned long addr);
+#else
+int in_gate_area_no_task(unsigned long addr);
+#define in_gate_area(task, addr) ({(void)task; in_gate_area_no_task(addr);})
+#endif	/* __HAVE_ARCH_GATE_AREA */
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_MM_H */
diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h
new file mode 100644
index 000000000000..47762ca695a5
--- /dev/null
+++ b/include/linux/mm_inline.h
@@ -0,0 +1,40 @@
+
+static inline void
+add_page_to_active_list(struct zone *zone, struct page *page)
+{
+	list_add(&page->lru, &zone->active_list);
+	zone->nr_active++;
+}
+
+static inline void
+add_page_to_inactive_list(struct zone *zone, struct page *page)
+{
+	list_add(&page->lru, &zone->inactive_list);
+	zone->nr_inactive++;
+}
+
+static inline void
+del_page_from_active_list(struct zone *zone, struct page *page)
+{
+	list_del(&page->lru);
+	zone->nr_active--;
+}
+
+static inline void
+del_page_from_inactive_list(struct zone *zone, struct page *page)
+{
+	list_del(&page->lru);
+	zone->nr_inactive--;
+}
+
+static inline void
+del_page_from_lru(struct zone *zone, struct page *page)
+{
+	list_del(&page->lru);
+	if (PageActive(page)) {
+		ClearPageActive(page);
+		zone->nr_active--;
+	} else {
+		zone->nr_inactive--;
+	}
+}
diff --git a/include/linux/mman.h b/include/linux/mman.h
new file mode 100644
index 000000000000..18a5689ef748
--- /dev/null
+++ b/include/linux/mman.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_MMAN_H
+#define _LINUX_MMAN_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+#include <asm/atomic.h>
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+extern int sysctl_overcommit_memory;
+extern int sysctl_overcommit_ratio;
+extern atomic_t vm_committed_space;
+
+#ifdef CONFIG_SMP
+extern void vm_acct_memory(long pages);
+#else
+static inline void vm_acct_memory(long pages)
+{
+	atomic_add(pages, &vm_committed_space);
+}
+#endif
+
+static inline void vm_unacct_memory(long pages)
+{
+	vm_acct_memory(-pages);
+}
+
+/*
+ * Optimisation macro.  It is equivalent to:
+ *      (x & bit1) ? bit2 : 0
+ * but this version is faster.
+ * ("bit1" and "bit2" must be single bits)
+ */
+#define _calc_vm_trans(x, bit1, bit2) \
+  ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
+   : ((x) & (bit1)) / ((bit1) / (bit2)))
+
+/*
+ * Combine the mmap "prot" argument into "vm_flags" used internally.
+ */
+static inline unsigned long
+calc_vm_prot_bits(unsigned long prot)
+{
+	return _calc_vm_trans(prot, PROT_READ,  VM_READ ) |
+	       _calc_vm_trans(prot, PROT_WRITE, VM_WRITE) |
+	       _calc_vm_trans(prot, PROT_EXEC,  VM_EXEC );
+}
+
+/*
+ * Combine the mmap "flags" argument into "vm_flags" used internally.
+ */
+static inline unsigned long
+calc_vm_flag_bits(unsigned long flags)
+{
+	return _calc_vm_trans(flags, MAP_GROWSDOWN,  VM_GROWSDOWN ) |
+	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
+	       _calc_vm_trans(flags, MAP_EXECUTABLE, VM_EXECUTABLE) |
+	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
+}
+
+#endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
new file mode 100644
index 000000000000..aefedf04b9bb
--- /dev/null
+++ b/include/linux/mmc/card.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/linux/mmc/card.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Card driver specific definitions.
+ */
+#ifndef LINUX_MMC_CARD_H
+#define LINUX_MMC_CARD_H
+
+#include <linux/mmc/mmc.h>
+
+struct mmc_cid {
+	unsigned int		manfid;
+	char			prod_name[8];
+	unsigned int		serial;
+	unsigned short		oemid;
+	unsigned short		year;
+	unsigned char		hwrev;
+	unsigned char		fwrev;
+	unsigned char		month;
+};
+
+struct mmc_csd {
+	unsigned char		mmca_vsn;
+	unsigned short		cmdclass;
+	unsigned short		tacc_clks;
+	unsigned int		tacc_ns;
+	unsigned int		max_dtr;
+	unsigned int		read_blkbits;
+	unsigned int		capacity;
+};
+
+struct mmc_host;
+
+/*
+ * MMC device
+ */
+struct mmc_card {
+	struct list_head	node;		/* node in hosts devices list */
+	struct mmc_host		*host;		/* the host this device belongs to */
+	struct device		dev;		/* the device */
+	unsigned int		rca;		/* relative card address of device */
+	unsigned int		state;		/* (our) card state */
+#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
+#define MMC_STATE_DEAD		(1<<1)		/* device no longer in stack */
+#define MMC_STATE_BAD		(1<<2)		/* unrecognised device */
+	u32			raw_cid[4];	/* raw card CID */
+	u32			raw_csd[4];	/* raw card CSD */
+	struct mmc_cid		cid;		/* card identification */
+	struct mmc_csd		csd;		/* card specific */
+};
+
+#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_dead(c)	((c)->state & MMC_STATE_DEAD)
+#define mmc_card_bad(c)		((c)->state & MMC_STATE_BAD)
+
+#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_dead(c)	((c)->state |= MMC_STATE_DEAD)
+#define mmc_card_set_bad(c)	((c)->state |= MMC_STATE_BAD)
+
+#define mmc_card_name(c)	((c)->cid.prod_name)
+#define mmc_card_id(c)		((c)->dev.bus_id)
+
+#define mmc_list_to_card(l)	container_of(l, struct mmc_card, node)
+#define mmc_get_drvdata(c)	dev_get_drvdata(&(c)->dev)
+#define mmc_set_drvdata(c,d)	dev_set_drvdata(&(c)->dev, d)
+
+/*
+ * MMC device driver (e.g., Flash card, I/O card...)
+ */
+struct mmc_driver {
+	struct device_driver drv;
+	int (*probe)(struct mmc_card *);
+	void (*remove)(struct mmc_card *);
+	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*resume)(struct mmc_card *);
+};
+
+extern int mmc_register_driver(struct mmc_driver *);
+extern void mmc_unregister_driver(struct mmc_driver *);
+
+static inline int mmc_card_claim_host(struct mmc_card *card)
+{
+	return __mmc_claim_host(card->host, card);
+}
+
+#define mmc_card_release_host(c)	mmc_release_host((c)->host)
+
+#endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
new file mode 100644
index 000000000000..f67686cef62a
--- /dev/null
+++ b/include/linux/mmc/host.h
@@ -0,0 +1,108 @@
+/*
+ *  linux/include/linux/mmc/host.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Host driver specific definitions.
+ */
+#ifndef LINUX_MMC_HOST_H
+#define LINUX_MMC_HOST_H
+
+#include <linux/mmc/mmc.h>
+
+struct mmc_ios {
+	unsigned int	clock;			/* clock rate */
+	unsigned short	vdd;
+
+#define	MMC_VDD_150	0
+#define	MMC_VDD_155	1
+#define	MMC_VDD_160	2
+#define	MMC_VDD_165	3
+#define	MMC_VDD_170	4
+#define	MMC_VDD_180	5
+#define	MMC_VDD_190	6
+#define	MMC_VDD_200	7
+#define	MMC_VDD_210	8
+#define	MMC_VDD_220	9
+#define	MMC_VDD_230	10
+#define	MMC_VDD_240	11
+#define	MMC_VDD_250	12
+#define	MMC_VDD_260	13
+#define	MMC_VDD_270	14
+#define	MMC_VDD_280	15
+#define	MMC_VDD_290	16
+#define	MMC_VDD_300	17
+#define	MMC_VDD_310	18
+#define	MMC_VDD_320	19
+#define	MMC_VDD_330	20
+#define	MMC_VDD_340	21
+#define	MMC_VDD_350	22
+#define	MMC_VDD_360	23
+
+	unsigned char	bus_mode;		/* command output mode */
+
+#define MMC_BUSMODE_OPENDRAIN	1
+#define MMC_BUSMODE_PUSHPULL	2
+
+	unsigned char	power_mode;		/* power supply mode */
+
+#define MMC_POWER_OFF		0
+#define MMC_POWER_UP		1
+#define MMC_POWER_ON		2
+};
+
+struct mmc_host_ops {
+	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
+};
+
+struct mmc_card;
+struct device;
+
+struct mmc_host {
+	struct device		*dev;
+	struct mmc_host_ops	*ops;
+	unsigned int		f_min;
+	unsigned int		f_max;
+	u32			ocr_avail;
+	char			host_name[8];
+
+	/* host specific block data */
+	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
+	unsigned short		max_hw_segs;	/* see blk_queue_max_hw_segments */
+	unsigned short		max_phys_segs;	/* see blk_queue_max_phys_segments */
+	unsigned short		max_sectors;	/* see blk_queue_max_sectors */
+	unsigned short		unused;
+
+	/* private data */
+	struct mmc_ios		ios;		/* current io bus settings */
+	u32			ocr;		/* the current OCR setting */
+
+	struct list_head	cards;		/* devices attached to this host */
+
+	wait_queue_head_t	wq;
+	spinlock_t		lock;		/* card_busy lock */
+	struct mmc_card		*card_busy;	/* the MMC card claiming host */
+	struct mmc_card		*card_selected;	/* the selected MMC card */
+
+	struct work_struct	detect;
+};
+
+extern struct mmc_host *mmc_alloc_host(int extra, struct device *);
+extern int mmc_add_host(struct mmc_host *);
+extern void mmc_remove_host(struct mmc_host *);
+extern void mmc_free_host(struct mmc_host *);
+
+#define mmc_priv(x)	((void *)((x) + 1))
+#define mmc_dev(x)	((x)->dev)
+
+extern int mmc_suspend_host(struct mmc_host *, u32);
+extern int mmc_resume_host(struct mmc_host *);
+
+extern void mmc_detect_change(struct mmc_host *);
+extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+
+#endif
+
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
new file mode 100644
index 000000000000..0d35d4ffb360
--- /dev/null
+++ b/include/linux/mmc/mmc.h
@@ -0,0 +1,101 @@
+/*
+ *  linux/include/linux/mmc/mmc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+struct request;
+struct mmc_data;
+struct mmc_request;
+
+struct mmc_command {
+	u32			opcode;
+	u32			arg;
+	u32			resp[4];
+	unsigned int		flags;		/* expected response type */
+#define MMC_RSP_NONE	(0 << 0)
+#define MMC_RSP_SHORT	(1 << 0)
+#define MMC_RSP_LONG	(2 << 0)
+#define MMC_RSP_MASK	(3 << 0)
+#define MMC_RSP_CRC	(1 << 3)		/* expect valid crc */
+#define MMC_RSP_BUSY	(1 << 4)		/* card may send busy */
+
+/*
+ * These are the response types, and correspond to valid bit
+ * patterns of the above flags.  One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+#define MMC_RSP_R1	(MMC_RSP_SHORT|MMC_RSP_CRC)
+#define MMC_RSP_R1B	(MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_BUSY)
+#define MMC_RSP_R2	(MMC_RSP_LONG|MMC_RSP_CRC)
+#define MMC_RSP_R3	(MMC_RSP_SHORT)
+#define MMC_RSP_R6	(MMC_RSP_SHORT|MMC_RSP_CRC)
+
+	unsigned int		retries;	/* max number of retries */
+	unsigned int		error;		/* command error */
+
+#define MMC_ERR_NONE	0
+#define MMC_ERR_TIMEOUT	1
+#define MMC_ERR_BADCRC	2
+#define MMC_ERR_FIFO	3
+#define MMC_ERR_FAILED	4
+#define MMC_ERR_INVALID	5
+
+	struct mmc_data		*data;		/* data segment associated with cmd */
+	struct mmc_request	*mrq;		/* assoicated request */
+};
+
+struct mmc_data {
+	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
+	unsigned int		timeout_clks;	/* data timeout (in clocks) */
+	unsigned int		blksz_bits;	/* data block size */
+	unsigned int		blocks;		/* number of blocks */
+	unsigned int		error;		/* data error */
+	unsigned int		flags;
+
+#define MMC_DATA_WRITE	(1 << 8)
+#define MMC_DATA_READ	(1 << 9)
+#define MMC_DATA_STREAM	(1 << 10)
+
+	unsigned int		bytes_xfered;
+
+	struct mmc_command	*stop;		/* stop command */
+	struct mmc_request	*mrq;		/* assoicated request */
+
+	unsigned int		sg_len;		/* size of scatter list */
+	struct scatterlist	*sg;		/* I/O scatter list */
+};
+
+struct mmc_request {
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	*stop;
+
+	void			*done_data;	/* completion data */
+	void			(*done)(struct mmc_request *);/* completion function */
+};
+
+struct mmc_host;
+struct mmc_card;
+
+extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+
+extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card);
+
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, (struct mmc_card *)-1);
+}
+
+extern void mmc_release_host(struct mmc_host *host);
+
+#endif
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
new file mode 100644
index 000000000000..7b904c5102f6
--- /dev/null
+++ b/include/linux/mmc/protocol.h
@@ -0,0 +1,213 @@
+/*
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ * Date  : $Date: 2002/06/18 12:37:30 $
+ *
+ * Author:  Andrew Christian
+ *          15 May 2002
+ */
+
+#ifndef MMC_MMC_PROTOCOL_H
+#define MMC_MMC_PROTOCOL_H
+
+/* Standard MMC commands (3.1)           type  argument     response */
+   /* class 1 */
+#define	MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
+#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
+#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
+#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
+#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
+#define MMC_SEND_STATUS	         13   /* ac   [31:16] RCA        R1  */
+#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+
+  /* class 2 */
+#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
+#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
+
+  /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+
+  /* class 4 */
+#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+  /* class 6 */
+#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
+#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+  /* class 5 */
+#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE                37   /* ac                      R1b */
+
+  /* class 9 */
+#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+
+  /* class 7 */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+
+  /* class 8 */
+#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1b */
+
+/* SD commands                           type  argument     response */
+  /* class 8 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR     3   /* ac                      R6  */
+
+  /* Application commands */
+#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
+#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
+#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
+
+/*
+  MMC status in R1
+  Type
+  	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+  	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x)    	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_APP_CMD		(1 << 5)	/* sr, c */
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+	u8  csd_structure;
+	u8  spec_vers;
+	u8  taac;
+	u8  nsac;
+	u8  tran_speed;
+	u16 ccc;
+	u8  read_bl_len;
+	u8  read_bl_partial;
+	u8  write_blk_misalign;
+	u8  read_blk_misalign;
+	u8  dsr_imp;
+	u16 c_size;
+	u8  vdd_r_curr_min;
+	u8  vdd_r_curr_max;
+	u8  vdd_w_curr_min;
+	u8  vdd_w_curr_max;
+	u8  c_size_mult;
+	union {
+		struct { /* MMC system specification version 3.1 */
+			u8  erase_grp_size;
+			u8  erase_grp_mult;
+		} v31;
+		struct { /* MMC system specification version 2.2 */
+			u8  sector_size;
+			u8  erase_grp_size;
+		} v22;
+	} erase;
+	u8  wp_grp_size;
+	u8  wp_grp_enable;
+	u8  default_ecc;
+	u8  r2w_factor;
+	u8  write_bl_len;
+	u8  write_bl_partial;
+	u8  file_format_grp;
+	u8  copy;
+	u8  perm_write_protect;
+	u8  tmp_write_protect;
+	u8  file_format;
+	u8  ecc;
+};
+
+#define MMC_VDD_145_150	0x00000001	/* VDD voltage 1.45 - 1.50 */
+#define MMC_VDD_150_155	0x00000002	/* VDD voltage 1.50 - 1.55 */
+#define MMC_VDD_155_160	0x00000004	/* VDD voltage 1.55 - 1.60 */
+#define MMC_VDD_160_165	0x00000008	/* VDD voltage 1.60 - 1.65 */
+#define MMC_VDD_165_170	0x00000010	/* VDD voltage 1.65 - 1.70 */
+#define MMC_VDD_17_18	0x00000020	/* VDD voltage 1.7 - 1.8 */
+#define MMC_VDD_18_19	0x00000040	/* VDD voltage 1.8 - 1.9 */
+#define MMC_VDD_19_20	0x00000080	/* VDD voltage 1.9 - 2.0 */
+#define MMC_VDD_20_21	0x00000100	/* VDD voltage 2.0 ~ 2.1 */
+#define MMC_VDD_21_22	0x00000200	/* VDD voltage 2.1 ~ 2.2 */
+#define MMC_VDD_22_23	0x00000400	/* VDD voltage 2.2 ~ 2.3 */
+#define MMC_VDD_23_24	0x00000800	/* VDD voltage 2.3 ~ 2.4 */
+#define MMC_VDD_24_25	0x00001000	/* VDD voltage 2.4 ~ 2.5 */
+#define MMC_VDD_25_26	0x00002000	/* VDD voltage 2.5 ~ 2.6 */
+#define MMC_VDD_26_27	0x00004000	/* VDD voltage 2.6 ~ 2.7 */
+#define MMC_VDD_27_28	0x00008000	/* VDD voltage 2.7 ~ 2.8 */
+#define MMC_VDD_28_29	0x00010000	/* VDD voltage 2.8 ~ 2.9 */
+#define MMC_VDD_29_30	0x00020000	/* VDD voltage 2.9 ~ 3.0 */
+#define MMC_VDD_30_31	0x00040000	/* VDD voltage 3.0 ~ 3.1 */
+#define MMC_VDD_31_32	0x00080000	/* VDD voltage 3.1 ~ 3.2 */
+#define MMC_VDD_32_33	0x00100000	/* VDD voltage 3.2 ~ 3.3 */
+#define MMC_VDD_33_34	0x00200000	/* VDD voltage 3.3 ~ 3.4 */
+#define MMC_VDD_34_35	0x00400000	/* VDD voltage 3.4 ~ 3.5 */
+#define MMC_VDD_35_36	0x00800000	/* VDD voltage 3.5 ~ 3.6 */
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
+#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1       */
+
+#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
+
+#endif  /* MMC_MMC_PROTOCOL_H */
+
diff --git a/include/linux/mmtimer.h b/include/linux/mmtimer.h
new file mode 100644
index 000000000000..884cabf16088
--- /dev/null
+++ b/include/linux/mmtimer.h
@@ -0,0 +1,56 @@
+/*
+ * Intel Multimedia Timer device interface
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ *
+ * This file should define an interface compatible with the IA-PC Multimedia
+ * Timers Draft Specification (rev. 0.97) from Intel.  Note that some
+ * hardware may not be able to safely export its registers to userspace,
+ * so the ioctl interface should support all necessary functionality.
+ *
+ * 11/01/01 - jbarnes - initial revision
+ * 9/10/04 - Christoph Lameter - remove interrupt support
+ * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
+ */
+
+#ifndef _LINUX_MMTIMER_H
+#define _LINUX_MMTIMER_H
+
+/*
+ * Breakdown of the ioctl's available.  An 'optional' next to the command
+ * indicates that supporting this command is optional, while 'required'
+ * commands must be implemented if conformance is desired.
+ *
+ * MMTIMER_GETOFFSET - optional
+ *   Should return the offset (relative to the start of the page where the
+ *   registers are mapped) for the counter in question.
+ *
+ * MMTIMER_GETRES - required
+ *   The resolution of the clock in femto (10^-15) seconds
+ *
+ * MMTIMER_GETFREQ - required
+ *   Frequency of the clock in Hz
+ *
+ * MMTIMER_GETBITS - required
+ *   Number of bits in the clock's counter
+ *
+ * MMTIMER_MMAPAVAIL - required
+ *   Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
+ *
+ * MMTIMER_GETCOUNTER - required
+ *   Gets the current value in the counter
+ */
+#define MMTIMER_IOCTL_BASE 'm'
+
+#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
+#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
+#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
+#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
+#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
+#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
+
+#endif /* _LINUX_MMTIMER_H */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
new file mode 100644
index 000000000000..e530c6c092f1
--- /dev/null
+++ b/include/linux/mmzone.h
@@ -0,0 +1,426 @@
+#ifndef _LINUX_MMZONE_H
+#define _LINUX_MMZONE_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/numa.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+/* Free memory management - zoned buddy allocator.  */
+#ifndef CONFIG_FORCE_MAX_ZONEORDER
+#define MAX_ORDER 11
+#else
+#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
+#endif
+
+struct free_area {
+	struct list_head	free_list;
+	unsigned long		nr_free;
+};
+
+struct pglist_data;
+
+/*
+ * zone->lock and zone->lru_lock are two of the hottest locks in the kernel.
+ * So add a wild amount of padding here to ensure that they fall into separate
+ * cachelines.  There are very few zone structures in the machine, so space
+ * consumption is not a concern here.
+ */
+#if defined(CONFIG_SMP)
+struct zone_padding {
+	char x[0];
+} ____cacheline_maxaligned_in_smp;
+#define ZONE_PADDING(name)	struct zone_padding name;
+#else
+#define ZONE_PADDING(name)
+#endif
+
+struct per_cpu_pages {
+	int count;		/* number of pages in the list */
+	int low;		/* low watermark, refill needed */
+	int high;		/* high watermark, emptying needed */
+	int batch;		/* chunk size for buddy add/remove */
+	struct list_head list;	/* the list of pages */
+};
+
+struct per_cpu_pageset {
+	struct per_cpu_pages pcp[2];	/* 0: hot.  1: cold */
+#ifdef CONFIG_NUMA
+	unsigned long numa_hit;		/* allocated in intended node */
+	unsigned long numa_miss;	/* allocated in non intended node */
+	unsigned long numa_foreign;	/* was intended here, hit elsewhere */
+	unsigned long interleave_hit; 	/* interleaver prefered this zone */
+	unsigned long local_node;	/* allocation from local node */
+	unsigned long other_node;	/* allocation from other node */
+#endif
+} ____cacheline_aligned_in_smp;
+
+#define ZONE_DMA		0
+#define ZONE_NORMAL		1
+#define ZONE_HIGHMEM		2
+
+#define MAX_NR_ZONES		3	/* Sync this with ZONES_SHIFT */
+#define ZONES_SHIFT		2	/* ceil(log2(MAX_NR_ZONES)) */
+
+
+/*
+ * When a memory allocation must conform to specific limitations (such
+ * as being suitable for DMA) the caller will pass in hints to the
+ * allocator in the gfp_mask, in the zone modifier bits.  These bits
+ * are used to select a priority ordered list of memory zones which
+ * match the requested limits.  GFP_ZONEMASK defines which bits within
+ * the gfp_mask should be considered as zone modifiers.  Each valid
+ * combination of the zone modifier bits has a corresponding list
+ * of zones (in node_zonelists).  Thus for two zone modifiers there
+ * will be a maximum of 4 (2 ** 2) zonelists, for 3 modifiers there will
+ * be 8 (2 ** 3) zonelists.  GFP_ZONETYPES defines the number of possible
+ * combinations of zone modifiers in "zone modifier space".
+ */
+#define GFP_ZONEMASK	0x03
+/*
+ * As an optimisation any zone modifier bits which are only valid when
+ * no other zone modifier bits are set (loners) should be placed in
+ * the highest order bits of this field.  This allows us to reduce the
+ * extent of the zonelists thus saving space.  For example in the case
+ * of three zone modifier bits, we could require up to eight zonelists.
+ * If the left most zone modifier is a "loner" then the highest valid
+ * zonelist would be four allowing us to allocate only five zonelists.
+ * Use the first form when the left most bit is not a "loner", otherwise
+ * use the second.
+ */
+/* #define GFP_ZONETYPES	(GFP_ZONEMASK + 1) */		/* Non-loner */
+#define GFP_ZONETYPES	((GFP_ZONEMASK + 1) / 2 + 1)		/* Loner */
+
+/*
+ * On machines where it is needed (eg PCs) we divide physical memory
+ * into multiple physical zones. On a PC we have 3 zones:
+ *
+ * ZONE_DMA	  < 16 MB	ISA DMA capable memory
+ * ZONE_NORMAL	16-896 MB	direct mapped by the kernel
+ * ZONE_HIGHMEM	 > 896 MB	only page cache and user processes
+ */
+
+struct zone {
+	/* Fields commonly accessed by the page allocator */
+	unsigned long		free_pages;
+	unsigned long		pages_min, pages_low, pages_high;
+	/*
+	 * We don't know if the memory that we're going to allocate will be freeable
+	 * or/and it will be released eventually, so to avoid totally wasting several
+	 * GB of ram we must reserve some of the lower zone memory (otherwise we risk
+	 * to run OOM on the lower zones despite there's tons of freeable ram
+	 * on the higher zones). This array is recalculated at runtime if the
+	 * sysctl_lowmem_reserve_ratio sysctl changes.
+	 */
+	unsigned long		lowmem_reserve[MAX_NR_ZONES];
+
+	struct per_cpu_pageset	pageset[NR_CPUS];
+
+	/*
+	 * free areas of different sizes
+	 */
+	spinlock_t		lock;
+	struct free_area	free_area[MAX_ORDER];
+
+
+	ZONE_PADDING(_pad1_)
+
+	/* Fields commonly accessed by the page reclaim scanner */
+	spinlock_t		lru_lock;	
+	struct list_head	active_list;
+	struct list_head	inactive_list;
+	unsigned long		nr_scan_active;
+	unsigned long		nr_scan_inactive;
+	unsigned long		nr_active;
+	unsigned long		nr_inactive;
+	unsigned long		pages_scanned;	   /* since last reclaim */
+	int			all_unreclaimable; /* All pages pinned */
+
+	/*
+	 * prev_priority holds the scanning priority for this zone.  It is
+	 * defined as the scanning priority at which we achieved our reclaim
+	 * target at the previous try_to_free_pages() or balance_pgdat()
+	 * invokation.
+	 *
+	 * We use prev_priority as a measure of how much stress page reclaim is
+	 * under - it drives the swappiness decision: whether to unmap mapped
+	 * pages.
+	 *
+	 * temp_priority is used to remember the scanning priority at which
+	 * this zone was successfully refilled to free_pages == pages_high.
+	 *
+	 * Access to both these fields is quite racy even on uniprocessor.  But
+	 * it is expected to average out OK.
+	 */
+	int temp_priority;
+	int prev_priority;
+
+
+	ZONE_PADDING(_pad2_)
+	/* Rarely used or read-mostly fields */
+
+	/*
+	 * wait_table		-- the array holding the hash table
+	 * wait_table_size	-- the size of the hash table array
+	 * wait_table_bits	-- wait_table_size == (1 << wait_table_bits)
+	 *
+	 * The purpose of all these is to keep track of the people
+	 * waiting for a page to become available and make them
+	 * runnable again when possible. The trouble is that this
+	 * consumes a lot of space, especially when so few things
+	 * wait on pages at a given time. So instead of using
+	 * per-page waitqueues, we use a waitqueue hash table.
+	 *
+	 * The bucket discipline is to sleep on the same queue when
+	 * colliding and wake all in that wait queue when removing.
+	 * When something wakes, it must check to be sure its page is
+	 * truly available, a la thundering herd. The cost of a
+	 * collision is great, but given the expected load of the
+	 * table, they should be so rare as to be outweighed by the
+	 * benefits from the saved space.
+	 *
+	 * __wait_on_page_locked() and unlock_page() in mm/filemap.c, are the
+	 * primary users of these fields, and in mm/page_alloc.c
+	 * free_area_init_core() performs the initialization of them.
+	 */
+	wait_queue_head_t	* wait_table;
+	unsigned long		wait_table_size;
+	unsigned long		wait_table_bits;
+
+	/*
+	 * Discontig memory support fields.
+	 */
+	struct pglist_data	*zone_pgdat;
+	struct page		*zone_mem_map;
+	/* zone_start_pfn == zone_start_paddr >> PAGE_SHIFT */
+	unsigned long		zone_start_pfn;
+
+	unsigned long		spanned_pages;	/* total size, including holes */
+	unsigned long		present_pages;	/* amount of memory (excluding holes) */
+
+	/*
+	 * rarely used fields:
+	 */
+	char			*name;
+} ____cacheline_maxaligned_in_smp;
+
+
+/*
+ * The "priority" of VM scanning is how much of the queues we will scan in one
+ * go. A value of 12 for DEF_PRIORITY implies that we will scan 1/4096th of the
+ * queues ("queue_length >> 12") during an aging round.
+ */
+#define DEF_PRIORITY 12
+
+/*
+ * One allocation request operates on a zonelist. A zonelist
+ * is a list of zones, the first one is the 'goal' of the
+ * allocation, the other zones are fallback zones, in decreasing
+ * priority.
+ *
+ * Right now a zonelist takes up less than a cacheline. We never
+ * modify it apart from boot-up, and only a few indices are used,
+ * so despite the zonelist table being relatively big, the cache
+ * footprint of this construct is very small.
+ */
+struct zonelist {
+	struct zone *zones[MAX_NUMNODES * MAX_NR_ZONES + 1]; // NULL delimited
+};
+
+
+/*
+ * The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM
+ * (mostly NUMA machines?) to denote a higher-level memory zone than the
+ * zone denotes.
+ *
+ * On NUMA machines, each NUMA node would have a pg_data_t to describe
+ * it's memory layout.
+ *
+ * Memory statistics and page replacement data structures are maintained on a
+ * per-zone basis.
+ */
+struct bootmem_data;
+typedef struct pglist_data {
+	struct zone node_zones[MAX_NR_ZONES];
+	struct zonelist node_zonelists[GFP_ZONETYPES];
+	int nr_zones;
+	struct page *node_mem_map;
+	struct bootmem_data *bdata;
+	unsigned long node_start_pfn;
+	unsigned long node_present_pages; /* total number of physical pages */
+	unsigned long node_spanned_pages; /* total size of physical page
+					     range, including holes */
+	int node_id;
+	struct pglist_data *pgdat_next;
+	wait_queue_head_t kswapd_wait;
+	struct task_struct *kswapd;
+	int kswapd_max_order;
+} pg_data_t;
+
+#define node_present_pages(nid)	(NODE_DATA(nid)->node_present_pages)
+#define node_spanned_pages(nid)	(NODE_DATA(nid)->node_spanned_pages)
+
+extern struct pglist_data *pgdat_list;
+
+void __get_zone_counts(unsigned long *active, unsigned long *inactive,
+			unsigned long *free, struct pglist_data *pgdat);
+void get_zone_counts(unsigned long *active, unsigned long *inactive,
+			unsigned long *free);
+void build_all_zonelists(void);
+void wakeup_kswapd(struct zone *zone, int order);
+int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
+		int alloc_type, int can_try_harder, int gfp_high);
+
+#ifdef CONFIG_HAVE_MEMORY_PRESENT
+void memory_present(int nid, unsigned long start, unsigned long end);
+#else
+static inline void memory_present(int nid, unsigned long start, unsigned long end) {}
+#endif
+
+#ifdef CONFIG_NEED_NODE_MEMMAP_SIZE
+unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
+#endif
+
+/*
+ * zone_idx() returns 0 for the ZONE_DMA zone, 1 for the ZONE_NORMAL zone, etc.
+ */
+#define zone_idx(zone)		((zone) - (zone)->zone_pgdat->node_zones)
+
+/**
+ * for_each_pgdat - helper macro to iterate over all nodes
+ * @pgdat - pointer to a pg_data_t variable
+ *
+ * Meant to help with common loops of the form
+ * pgdat = pgdat_list;
+ * while(pgdat) {
+ * 	...
+ * 	pgdat = pgdat->pgdat_next;
+ * }
+ */
+#define for_each_pgdat(pgdat) \
+	for (pgdat = pgdat_list; pgdat; pgdat = pgdat->pgdat_next)
+
+/*
+ * next_zone - helper magic for for_each_zone()
+ * Thanks to William Lee Irwin III for this piece of ingenuity.
+ */
+static inline struct zone *next_zone(struct zone *zone)
+{
+	pg_data_t *pgdat = zone->zone_pgdat;
+
+	if (zone < pgdat->node_zones + MAX_NR_ZONES - 1)
+		zone++;
+	else if (pgdat->pgdat_next) {
+		pgdat = pgdat->pgdat_next;
+		zone = pgdat->node_zones;
+	} else
+		zone = NULL;
+
+	return zone;
+}
+
+/**
+ * for_each_zone - helper macro to iterate over all memory zones
+ * @zone - pointer to struct zone variable
+ *
+ * The user only needs to declare the zone variable, for_each_zone
+ * fills it in. This basically means for_each_zone() is an
+ * easier to read version of this piece of code:
+ *
+ * for (pgdat = pgdat_list; pgdat; pgdat = pgdat->node_next)
+ * 	for (i = 0; i < MAX_NR_ZONES; ++i) {
+ * 		struct zone * z = pgdat->node_zones + i;
+ * 		...
+ * 	}
+ * }
+ */
+#define for_each_zone(zone) \
+	for (zone = pgdat_list->node_zones; zone; zone = next_zone(zone))
+
+static inline int is_highmem_idx(int idx)
+{
+	return (idx == ZONE_HIGHMEM);
+}
+
+static inline int is_normal_idx(int idx)
+{
+	return (idx == ZONE_NORMAL);
+}
+/**
+ * is_highmem - helper function to quickly check if a struct zone is a 
+ *              highmem zone or not.  This is an attempt to keep references
+ *              to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
+ * @zone - pointer to struct zone variable
+ */
+static inline int is_highmem(struct zone *zone)
+{
+	return zone == zone->zone_pgdat->node_zones + ZONE_HIGHMEM;
+}
+
+static inline int is_normal(struct zone *zone)
+{
+	return zone == zone->zone_pgdat->node_zones + ZONE_NORMAL;
+}
+
+/* These two functions are used to setup the per zone pages min values */
+struct ctl_table;
+struct file;
+int min_free_kbytes_sysctl_handler(struct ctl_table *, int, struct file *, 
+					void __user *, size_t *, loff_t *);
+extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1];
+int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *,
+					void __user *, size_t *, loff_t *);
+
+#include <linux/topology.h>
+/* Returns the number of the current Node. */
+#define numa_node_id()		(cpu_to_node(_smp_processor_id()))
+
+#ifndef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data contig_page_data;
+#define NODE_DATA(nid)		(&contig_page_data)
+#define NODE_MEM_MAP(nid)	mem_map
+#define MAX_NODES_SHIFT		1
+#define pfn_to_nid(pfn)		(0)
+
+#else /* CONFIG_DISCONTIGMEM */
+
+#include <asm/mmzone.h>
+
+#if BITS_PER_LONG == 32 || defined(ARCH_HAS_ATOMIC_UNSIGNED)
+/*
+ * with 32 bit page->flags field, we reserve 8 bits for node/zone info.
+ * there are 3 zones (2 bits) and this leaves 8-2=6 bits for nodes.
+ */
+#define MAX_NODES_SHIFT		6
+#elif BITS_PER_LONG == 64
+/*
+ * with 64 bit flags field, there's plenty of room.
+ */
+#define MAX_NODES_SHIFT		10
+#endif
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#if NODES_SHIFT > MAX_NODES_SHIFT
+#error NODES_SHIFT > MAX_NODES_SHIFT
+#endif
+
+/* There are currently 3 zones: DMA, Normal & Highmem, thus we need 2 bits */
+#define MAX_ZONES_SHIFT		2
+
+#if ZONES_SHIFT > MAX_ZONES_SHIFT
+#error ZONES_SHIFT > MAX_ZONES_SHIFT
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
new file mode 100644
index 000000000000..d6eb7b2efc04
--- /dev/null
+++ b/include/linux/mod_devicetable.h
@@ -0,0 +1,178 @@
+/*
+ * Device tables which are exported to userspace via
+ * scripts/table2alias.c.  You must keep that file in sync with this
+ * header.
+ */
+
+#ifndef LINUX_MOD_DEVICETABLE_H
+#define LINUX_MOD_DEVICETABLE_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
+	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
+	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
+
+#define IEEE1394_MATCH_VENDOR_ID	0x0001
+#define IEEE1394_MATCH_MODEL_ID		0x0002
+#define IEEE1394_MATCH_SPECIFIER_ID	0x0004
+#define IEEE1394_MATCH_VERSION		0x0008
+
+struct ieee1394_device_id {
+	__u32 match_flags;
+	__u32 vendor_id;
+	__u32 model_id;
+	__u32 specifier_id;
+	__u32 version;
+	kernel_ulong_t driver_data;
+};
+
+
+/*
+ * Device table entry for "new style" table-driven USB drivers.
+ * User mode code can read these tables to choose which modules to load.
+ * Declare the table as a MODULE_DEVICE_TABLE.
+ *
+ * A probe() parameter will point to a matching entry from this table.
+ * Use the driver_info field for each match to hold information tied
+ * to that match:  device quirks, etc.
+ *
+ * Terminate the driver's table with an all-zeroes entry.
+ * Use the flag values to control which fields are compared.
+ */
+
+/**
+ * struct usb_device_id - identifies USB devices for probing and hotplugging
+ * @match_flags: Bit mask controlling of the other fields are used to match
+ *	against new devices.  Any field except for driver_info may be used,
+ *	although some only make sense in conjunction with other fields.
+ *	This is usually set by a USB_DEVICE_*() macro, which sets all
+ *	other fields in this structure except for driver_info.
+ * @idVendor: USB vendor ID for a device; numbers are assigned
+ *	by the USB forum to its members.
+ * @idProduct: Vendor-assigned product ID.
+ * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
+ *	This is also used to identify individual product versions, for
+ *	a range consisting of a single device.
+ * @bcdDevice_hi: High end of version number range.  The range of product
+ *	versions is inclusive.
+ * @bDeviceClass: Class of device; numbers are assigned
+ *	by the USB forum.  Products may choose to implement classes,
+ *	or be vendor-specific.  Device classes specify behavior of all
+ *	the interfaces on a devices.
+ * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
+ * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
+ * @bInterfaceClass: Class of interface; numbers are assigned
+ *	by the USB forum.  Products may choose to implement classes,
+ *	or be vendor-specific.  Interface classes specify behavior only
+ *	of a given interface; other interfaces may support other classes.
+ * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
+ * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
+ * @driver_info: Holds information used by the driver.  Usually it holds
+ *	a pointer to a descriptor understood by the driver, or perhaps
+ *	device flags.
+ *
+ * In most cases, drivers will create a table of device IDs by using
+ * USB_DEVICE(), or similar macros designed for that purpose.
+ * They will then export it to userspace using MODULE_DEVICE_TABLE(),
+ * and provide it to the USB core through their usb_driver structure.
+ *
+ * See the usb_match_id() function for information about how matches are
+ * performed.  Briefly, you will normally use one of several macros to help
+ * construct these entries.  Each entry you provide will either identify
+ * one or more specific products, or will identify a class of products
+ * which have agreed to behave the same.  You should put the more specific
+ * matches towards the beginning of your table, so that driver_info can
+ * record quirks of specific products.
+ */
+struct usb_device_id {
+	/* which fields to match against? */
+	__u16		match_flags;
+
+	/* Used for product specific matches; range is inclusive */
+	__u16		idVendor;
+	__u16		idProduct;
+	__u16		bcdDevice_lo;
+	__u16		bcdDevice_hi;
+
+	/* Used for device class matches */
+	__u8		bDeviceClass;
+	__u8		bDeviceSubClass;
+	__u8		bDeviceProtocol;
+
+	/* Used for interface class matches */
+	__u8		bInterfaceClass;
+	__u8		bInterfaceSubClass;
+	__u8		bInterfaceProtocol;
+
+	/* not matched against */
+	kernel_ulong_t	driver_info;
+};
+
+/* Some useful macros to use to create struct usb_device_id */
+#define USB_DEVICE_ID_MATCH_VENDOR		0x0001
+#define USB_DEVICE_ID_MATCH_PRODUCT		0x0002
+#define USB_DEVICE_ID_MATCH_DEV_LO		0x0004
+#define USB_DEVICE_ID_MATCH_DEV_HI		0x0008
+#define USB_DEVICE_ID_MATCH_DEV_CLASS		0x0010
+#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS	0x0020
+#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL	0x0040
+#define USB_DEVICE_ID_MATCH_INT_CLASS		0x0080
+#define USB_DEVICE_ID_MATCH_INT_SUBCLASS	0x0100
+#define USB_DEVICE_ID_MATCH_INT_PROTOCOL	0x0200
+
+/* s390 CCW devices */
+struct ccw_device_id {
+	__u16	match_flags;	/* which fields to match against */
+
+	__u16	cu_type;	/* control unit type     */
+	__u16	dev_type;	/* device type           */
+	__u8	cu_model;	/* control unit model    */
+	__u8	dev_model;	/* device model          */
+
+	kernel_ulong_t driver_info;
+};
+
+#define CCW_DEVICE_ID_MATCH_CU_TYPE		0x01
+#define CCW_DEVICE_ID_MATCH_CU_MODEL		0x02
+#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE		0x04
+#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL	0x08
+
+
+#define PNP_ID_LEN	8
+#define PNP_MAX_DEVICES	8
+
+struct pnp_device_id {
+	__u8 id[PNP_ID_LEN];
+	kernel_ulong_t driver_data;
+};
+
+struct pnp_card_device_id {
+	__u8 id[PNP_ID_LEN];
+	kernel_ulong_t driver_data;
+	struct {
+		__u8 id[PNP_ID_LEN];
+	} devs[PNP_MAX_DEVICES];
+};
+
+
+#define SERIO_ANY	0xff
+
+struct serio_device_id {
+	__u8 type;
+	__u8 extra;
+	__u8 id;
+	__u8 proto;
+};
+
+
+#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/module.h b/include/linux/module.h
new file mode 100644
index 000000000000..0e432a0f4aee
--- /dev/null
+++ b/include/linux/module.h
@@ -0,0 +1,570 @@
+#ifndef _LINUX_MODULE_H
+#define _LINUX_MODULE_H
+/*
+ * Dynamic loading of modules into the kernel.
+ *
+ * Rewritten by Richard Henderson <rth@tamu.edu> Dec 1996
+ * Rewritten again by Rusty Russell, 2002
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/stat.h>
+#include <linux/compiler.h>
+#include <linux/cache.h>
+#include <linux/kmod.h>
+#include <linux/elf.h>
+#include <linux/stringify.h>
+#include <linux/kobject.h>
+#include <linux/moduleparam.h>
+#include <asm/local.h>
+
+#include <asm/module.h>
+
+/* Not Yet Implemented */
+#define MODULE_SUPPORTED_DEVICE(name)
+
+/* v850 toolchain uses a `_' prefix for all user symbols */
+#ifndef MODULE_SYMBOL_PREFIX
+#define MODULE_SYMBOL_PREFIX ""
+#endif
+
+#define MODULE_NAME_LEN (64 - sizeof(unsigned long))
+
+struct kernel_symbol
+{
+	unsigned long value;
+	const char *name;
+};
+
+struct modversion_info
+{
+	unsigned long crc;
+	char name[MODULE_NAME_LEN];
+};
+
+struct module;
+
+struct module_attribute {
+        struct attribute attr;
+        ssize_t (*show)(struct module_attribute *, struct module *, char *);
+        ssize_t (*store)(struct module_attribute *, struct module *,
+			 const char *, size_t count);
+};
+
+struct module_kobject
+{
+	struct kobject kobj;
+	struct module *mod;
+};
+
+/* These are either module local, or the kernel's dummy ones. */
+extern int init_module(void);
+extern void cleanup_module(void);
+
+/* Archs provide a method of finding the correct exception table. */
+struct exception_table_entry;
+
+const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+	       const struct exception_table_entry *last,
+	       unsigned long value);
+void sort_extable(struct exception_table_entry *start,
+		  struct exception_table_entry *finish);
+void sort_main_extable(void);
+
+extern struct subsystem module_subsys;
+
+#ifdef MODULE
+#define MODULE_GENERIC_TABLE(gtype,name)			\
+extern const struct gtype##_id __mod_##gtype##_table		\
+  __attribute__ ((unused, alias(__stringify(name))))
+
+extern struct module __this_module;
+#define THIS_MODULE (&__this_module)
+#else  /* !MODULE */
+#define MODULE_GENERIC_TABLE(gtype,name)
+#define THIS_MODULE ((struct module *)0)
+#endif
+
+/* Generic info of form tag = "info" */
+#define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
+
+/* For userspace: you can also call me... */
+#define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
+
+/*
+ * The following license idents are currently accepted as indicating free
+ * software modules
+ *
+ *	"GPL"				[GNU Public License v2 or later]
+ *	"GPL v2"			[GNU Public License v2]
+ *	"GPL and additional rights"	[GNU Public License v2 rights and more]
+ *	"Dual BSD/GPL"			[GNU Public License v2
+ *					 or BSD license choice]
+ *	"Dual MPL/GPL"			[GNU Public License v2
+ *					 or Mozilla license choice]
+ *
+ * The following other idents are available
+ *
+ *	"Proprietary"			[Non free products]
+ *
+ * There are dual licensed components, but when running with Linux it is the
+ * GPL that is relevant so this is a non issue. Similarly LGPL linked with GPL
+ * is a GPL combined work.
+ *
+ * This exists for several reasons
+ * 1.	So modinfo can show license info for users wanting to vet their setup 
+ *	is free
+ * 2.	So the community can ignore bug reports including proprietary modules
+ * 3.	So vendors can do likewise based on their own policies
+ */
+#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
+
+/* Author, ideally of form NAME <EMAIL>[, NAME <EMAIL>]*[ and NAME <EMAIL>] */
+#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
+  
+/* What your module does. */
+#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
+
+/* One for each parameter, describing how to use it.  Some files do
+   multiple of these per line, so can't just use MODULE_INFO. */
+#define MODULE_PARM_DESC(_parm, desc) \
+	__MODULE_INFO(parm, _parm, #_parm ":" desc)
+
+#define MODULE_DEVICE_TABLE(type,name)		\
+  MODULE_GENERIC_TABLE(type##_device,name)
+
+/* Version of form [<epoch>:]<version>[-<extra-version>].
+   Or for CVS/RCS ID version, everything but the number is stripped.
+  <epoch>: A (small) unsigned integer which allows you to start versions
+           anew. If not mentioned, it's zero.  eg. "2:1.0" is after
+	   "1:2.0".
+  <version>: The <version> may contain only alphanumerics and the
+           character `.'.  Ordered by numeric sort for numeric parts,
+	   ascii sort for ascii parts (as per RPM or DEB algorithm).
+  <extraversion>: Like <version>, but inserted for local
+           customizations, eg "rh3" or "rusty1".
+
+  Using this automatically adds a checksum of the .c files and the
+  local headers in "srcversion".
+*/
+#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
+
+/* Given an address, look for it in the exception tables */
+const struct exception_table_entry *search_exception_tables(unsigned long add);
+
+struct notifier_block;
+
+#ifdef CONFIG_MODULES
+
+/* Get/put a kernel symbol (calls must be symmetric) */
+void *__symbol_get(const char *symbol);
+void *__symbol_get_gpl(const char *symbol);
+#define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
+
+#ifndef __GENKSYMS__
+#ifdef CONFIG_MODVERSIONS
+/* Mark the CRC weak since genksyms apparently decides not to
+ * generate a checksums for some symbols */
+#define __CRC_SYMBOL(sym, sec)					\
+	extern void *__crc_##sym __attribute__((weak));		\
+	static const unsigned long __kcrctab_##sym		\
+	__attribute_used__					\
+	__attribute__((section("__kcrctab" sec), unused))	\
+	= (unsigned long) &__crc_##sym;
+#else
+#define __CRC_SYMBOL(sym, sec)
+#endif
+
+/* For every exported symbol, place a struct in the __ksymtab section */
+#define __EXPORT_SYMBOL(sym, sec)				\
+	__CRC_SYMBOL(sym, sec)					\
+	static const char __kstrtab_##sym[]			\
+	__attribute__((section("__ksymtab_strings")))		\
+	= MODULE_SYMBOL_PREFIX #sym;                    	\
+	static const struct kernel_symbol __ksymtab_##sym	\
+	__attribute_used__					\
+	__attribute__((section("__ksymtab" sec), unused))	\
+	= { (unsigned long)&sym, __kstrtab_##sym }
+
+#define EXPORT_SYMBOL(sym)					\
+	__EXPORT_SYMBOL(sym, "")
+
+#define EXPORT_SYMBOL_GPL(sym)					\
+	__EXPORT_SYMBOL(sym, "_gpl")
+
+#endif
+
+struct module_ref
+{
+	local_t count;
+} ____cacheline_aligned;
+
+enum module_state
+{
+	MODULE_STATE_LIVE,
+	MODULE_STATE_COMING,
+	MODULE_STATE_GOING,
+};
+
+/* Similar stuff for section attributes. */
+#define MODULE_SECT_NAME_LEN 32
+struct module_sect_attr
+{
+	struct module_attribute mattr;
+	char name[MODULE_SECT_NAME_LEN];
+	unsigned long address;
+};
+
+struct module_sect_attrs
+{
+	struct attribute_group grp;
+	struct module_sect_attr attrs[0];
+};
+
+struct module_param_attrs;
+
+struct module
+{
+	enum module_state state;
+
+	/* Member of list of modules */
+	struct list_head list;
+
+	/* Unique handle for this module */
+	char name[MODULE_NAME_LEN];
+
+	/* Sysfs stuff. */
+	struct module_kobject mkobj;
+	struct module_param_attrs *param_attrs;
+
+	/* Exported symbols */
+	const struct kernel_symbol *syms;
+	unsigned int num_syms;
+	const unsigned long *crcs;
+
+	/* GPL-only exported symbols. */
+	const struct kernel_symbol *gpl_syms;
+	unsigned int num_gpl_syms;
+	const unsigned long *gpl_crcs;
+
+	/* Exception table */
+	unsigned int num_exentries;
+	const struct exception_table_entry *extable;
+
+	/* Startup function. */
+	int (*init)(void);
+
+	/* If this is non-NULL, vfree after init() returns */
+	void *module_init;
+
+	/* Here is the actual code + data, vfree'd on unload. */
+	void *module_core;
+
+	/* Here are the sizes of the init and core sections */
+	unsigned long init_size, core_size;
+
+	/* The size of the executable code in each section.  */
+	unsigned long init_text_size, core_text_size;
+
+	/* Arch-specific module values */
+	struct mod_arch_specific arch;
+
+	/* Am I unsafe to unload? */
+	int unsafe;
+
+	/* Am I GPL-compatible */
+	int license_gplok;
+
+#ifdef CONFIG_MODULE_UNLOAD
+	/* Reference counts */
+	struct module_ref ref[NR_CPUS];
+
+	/* What modules depend on me? */
+	struct list_head modules_which_use_me;
+
+	/* Who is waiting for us to be unloaded */
+	struct task_struct *waiter;
+
+	/* Destruction function. */
+	void (*exit)(void);
+#endif
+
+#ifdef CONFIG_KALLSYMS
+	/* We keep the symbol and string tables for kallsyms. */
+	Elf_Sym *symtab;
+	unsigned long num_symtab;
+	char *strtab;
+
+	/* Section attributes */
+	struct module_sect_attrs *sect_attrs;
+#endif
+
+	/* Per-cpu data. */
+	void *percpu;
+
+	/* The command line arguments (may be mangled).  People like
+	   keeping pointers to this stuff */
+	char *args;
+};
+
+/* FIXME: It'd be nice to isolate modules during init, too, so they
+   aren't used before they (may) fail.  But presently too much code
+   (IDE & SCSI) require entry into the module during init.*/
+static inline int module_is_live(struct module *mod)
+{
+	return mod->state != MODULE_STATE_GOING;
+}
+
+/* Is this address in a module? (second is with no locks, for oops) */
+struct module *module_text_address(unsigned long addr);
+struct module *__module_text_address(unsigned long addr);
+
+/* Returns module and fills in value, defined and namebuf, or NULL if
+   symnum out of range. */
+struct module *module_get_kallsym(unsigned int symnum,
+				  unsigned long *value,
+				  char *type,
+				  char namebuf[128]);
+
+/* Look for this name: can be of form module:name. */
+unsigned long module_kallsyms_lookup_name(const char *name);
+
+int is_exported(const char *name, const struct module *mod);
+
+extern void __module_put_and_exit(struct module *mod, long code)
+	__attribute__((noreturn));
+#define module_put_and_exit(code) __module_put_and_exit(THIS_MODULE, code);
+
+#ifdef CONFIG_MODULE_UNLOAD
+unsigned int module_refcount(struct module *mod);
+void __symbol_put(const char *symbol);
+#define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
+void symbol_put_addr(void *addr);
+
+/* Sometimes we know we already have a refcount, and it's easier not
+   to handle the error case (which only happens with rmmod --wait). */
+static inline void __module_get(struct module *module)
+{
+	if (module) {
+		BUG_ON(module_refcount(module) == 0);
+		local_inc(&module->ref[get_cpu()].count);
+		put_cpu();
+	}
+}
+
+static inline int try_module_get(struct module *module)
+{
+	int ret = 1;
+
+	if (module) {
+		unsigned int cpu = get_cpu();
+		if (likely(module_is_live(module)))
+			local_inc(&module->ref[cpu].count);
+		else
+			ret = 0;
+		put_cpu();
+	}
+	return ret;
+}
+
+static inline void module_put(struct module *module)
+{
+	if (module) {
+		unsigned int cpu = get_cpu();
+		local_dec(&module->ref[cpu].count);
+		/* Maybe they're waiting for us to drop reference? */
+		if (unlikely(!module_is_live(module)))
+			wake_up_process(module->waiter);
+		put_cpu();
+	}
+}
+
+#else /*!CONFIG_MODULE_UNLOAD*/
+static inline int try_module_get(struct module *module)
+{
+	return !module || module_is_live(module);
+}
+static inline void module_put(struct module *module)
+{
+}
+static inline void __module_get(struct module *module)
+{
+}
+#define symbol_put(x) do { } while(0)
+#define symbol_put_addr(p) do { } while(0)
+
+#endif /* CONFIG_MODULE_UNLOAD */
+
+/* This is a #define so the string doesn't get put in every .o file */
+#define module_name(mod)			\
+({						\
+	struct module *__mod = (mod);		\
+	__mod ? __mod->name : "kernel";		\
+})
+
+#define __unsafe(mod)							     \
+do {									     \
+	if (mod && !(mod)->unsafe) {					     \
+		printk(KERN_WARNING					     \
+		       "Module %s cannot be unloaded due to unsafe usage in" \
+		       " %s:%u\n", (mod)->name, __FILE__, __LINE__);	     \
+		(mod)->unsafe = 1;					     \
+	}								     \
+} while(0)
+
+/* For kallsyms to ask for address resolution.  NULL means not found. */
+const char *module_address_lookup(unsigned long addr,
+				  unsigned long *symbolsize,
+				  unsigned long *offset,
+				  char **modname);
+
+/* For extable.c to search modules' exception tables. */
+const struct exception_table_entry *search_module_extables(unsigned long addr);
+
+int register_module_notifier(struct notifier_block * nb);
+int unregister_module_notifier(struct notifier_block * nb);
+
+extern void print_modules(void);
+
+struct device_driver;
+void module_add_driver(struct module *, struct device_driver *);
+void module_remove_driver(struct device_driver *);
+
+#else /* !CONFIG_MODULES... */
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_extables(unsigned long addr)
+{
+	return NULL;
+}
+
+/* Is this address in a module? */
+static inline struct module *module_text_address(unsigned long addr)
+{
+	return NULL;
+}
+
+/* Is this address in a module? (don't take a lock, we're oopsing) */
+static inline struct module *__module_text_address(unsigned long addr)
+{
+	return NULL;
+}
+
+/* Get/put a kernel symbol (calls should be symmetric) */
+#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak)); &(x); })
+#define symbol_put(x) do { } while(0)
+#define symbol_put_addr(x) do { } while(0)
+
+static inline void __module_get(struct module *module)
+{
+}
+
+static inline int try_module_get(struct module *module)
+{
+	return 1;
+}
+
+static inline void module_put(struct module *module)
+{
+}
+
+#define module_name(mod) "kernel"
+
+#define __unsafe(mod)
+
+/* For kallsyms to ask for address resolution.  NULL means not found. */
+static inline const char *module_address_lookup(unsigned long addr,
+						unsigned long *symbolsize,
+						unsigned long *offset,
+						char **modname)
+{
+	return NULL;
+}
+
+static inline struct module *module_get_kallsym(unsigned int symnum,
+						unsigned long *value,
+						char *type,
+						char namebuf[128])
+{
+	return NULL;
+}
+
+static inline unsigned long module_kallsyms_lookup_name(const char *name)
+{
+	return 0;
+}
+
+static inline int is_exported(const char *name, const struct module *mod)
+{
+	return 0;
+}
+
+static inline int register_module_notifier(struct notifier_block * nb)
+{
+	/* no events will happen anyway, so this can always succeed */
+	return 0;
+}
+
+static inline int unregister_module_notifier(struct notifier_block * nb)
+{
+	return 0;
+}
+
+#define module_put_and_exit(code) do_exit(code)
+
+static inline void print_modules(void)
+{
+}
+
+struct device_driver;
+struct module;
+
+static inline void module_add_driver(struct module *module, struct device_driver *driver)
+{
+}
+
+static inline void module_remove_driver(struct device_driver *driver)
+{
+}
+
+#endif /* CONFIG_MODULES */
+
+#define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
+
+/* BELOW HERE ALL THESE ARE OBSOLETE AND WILL VANISH */
+
+struct obsolete_modparm {
+	char name[64];
+	char type[64-sizeof(void *)];
+	void *addr;
+};
+
+static inline void MODULE_PARM_(void) { }
+#ifdef MODULE
+/* DEPRECATED: Do not use. */
+#define MODULE_PARM(var,type)						    \
+struct obsolete_modparm __parm_##var __attribute__((section("__obsparm"))) = \
+{ __stringify(var), type, &MODULE_PARM_ }; \
+__MODULE_PARM_TYPE(var, type);
+#else
+#define MODULE_PARM(var,type) static void __attribute__((__unused__)) *__parm_##var = &MODULE_PARM_;
+#endif
+
+#define __MODULE_STRING(x) __stringify(x)
+
+/* Use symbol_get and symbol_put instead.  You'll thank me. */
+#define HAVE_INTER_MODULE
+extern void __deprecated inter_module_register(const char *,
+		struct module *, const void *);
+extern void __deprecated inter_module_unregister(const char *);
+extern const void * __deprecated inter_module_get_request(const char *,
+		const char *);
+extern void __deprecated inter_module_put(const char *);
+
+#endif /* _LINUX_MODULE_H */
diff --git a/include/linux/moduleloader.h b/include/linux/moduleloader.h
new file mode 100644
index 000000000000..eb1033957486
--- /dev/null
+++ b/include/linux/moduleloader.h
@@ -0,0 +1,47 @@
+#ifndef _LINUX_MODULELOADER_H
+#define _LINUX_MODULELOADER_H
+/* The stuff needed for archs to support modules. */
+
+#include <linux/module.h>
+#include <linux/elf.h>
+
+/* These must be implemented by the specific architecture */
+
+/* Adjust arch-specific sections.  Return 0 on success.  */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+			      Elf_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod);
+
+/* Allocator used for allocating struct module, core sections and init
+   sections.  Returns NULL on failure. */
+void *module_alloc(unsigned long size);
+
+/* Free memory returned from module_alloc. */
+void module_free(struct module *mod, void *module_region);
+
+/* Apply the given relocation to the (simplified) ELF.  Return -error
+   or 0. */
+int apply_relocate(Elf_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *mod);
+
+/* Apply the given add relocation to the (simplified) ELF.  Return
+   -error or 0 */
+int apply_relocate_add(Elf_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *mod);
+
+/* Any final processing of module before access.  Return -error or 0. */
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *mod);
+
+/* Any cleanup needed when module leaves. */
+void module_arch_cleanup(struct module *mod);
+
+#endif
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
new file mode 100644
index 000000000000..368ec8e45bd0
--- /dev/null
+++ b/include/linux/moduleparam.h
@@ -0,0 +1,182 @@
+#ifndef _LINUX_MODULE_PARAMS_H
+#define _LINUX_MODULE_PARAMS_H
+/* (C) Copyright 2001, 2002 Rusty Russell IBM Corporation */
+#include <linux/init.h>
+#include <linux/stringify.h>
+#include <linux/kernel.h>
+
+/* You can override this manually, but generally this should match the
+   module name. */
+#ifdef MODULE
+#define MODULE_PARAM_PREFIX /* empty */
+#else
+#define MODULE_PARAM_PREFIX __stringify(KBUILD_MODNAME) "."
+#endif
+
+#ifdef MODULE
+#define ___module_cat(a,b) __mod_ ## a ## b
+#define __module_cat(a,b) ___module_cat(a,b)
+#define __MODULE_INFO(tag, name, info)					  \
+static const char __module_cat(name,__LINE__)[]				  \
+  __attribute_used__							  \
+  __attribute__((section(".modinfo"),unused)) = __stringify(tag) "=" info
+#else  /* !MODULE */
+#define __MODULE_INFO(tag, name, info)
+#endif
+#define __MODULE_PARM_TYPE(name, _type)					  \
+  __MODULE_INFO(parmtype, name##type, #name ":" _type)
+
+struct kernel_param;
+
+/* Returns 0, or -errno.  arg is in kp->arg. */
+typedef int (*param_set_fn)(const char *val, struct kernel_param *kp);
+/* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
+typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
+
+struct kernel_param {
+	const char *name;
+	unsigned int perm;
+	param_set_fn set;
+	param_get_fn get;
+	void *arg;
+};
+
+/* Special one for strings we want to copy into */
+struct kparam_string {
+	unsigned int maxlen;
+	char *string;
+};
+
+/* Special one for arrays */
+struct kparam_array
+{
+	unsigned int max;
+	unsigned int *num;
+	param_set_fn set;
+	param_get_fn get;
+	unsigned int elemsize;
+	void *elem;
+};
+
+/* This is the fundamental function for registering boot/module
+   parameters.  perm sets the visibility in driverfs: 000 means it's
+   not there, read bits mean it's readable, write bits mean it's
+   writable. */
+#define __module_param_call(prefix, name, set, get, arg, perm)		\
+	static char __param_str_##name[] = prefix #name;		\
+	static struct kernel_param const __param_##name			\
+	__attribute_used__						\
+    __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
+	= { __param_str_##name, perm, set, get, arg }
+
+#define module_param_call(name, set, get, arg, perm)			      \
+	__module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm)
+
+/* Helper functions: type is byte, short, ushort, int, uint, long,
+   ulong, charp, bool or invbool, or XXX if you define param_get_XXX,
+   param_set_XXX and param_check_XXX. */
+#define module_param_named(name, value, type, perm)			   \
+	param_check_##type(name, &(value));				   \
+	module_param_call(name, param_set_##type, param_get_##type, &value, perm); \
+	__MODULE_PARM_TYPE(name, #type)
+
+#define module_param(name, type, perm)				\
+	module_param_named(name, name, type, perm)
+
+/* Actually copy string: maxlen param is usually sizeof(string). */
+#define module_param_string(name, string, len, perm)			\
+	static struct kparam_string __param_string_##name		\
+		= { len, string };					\
+	module_param_call(name, param_set_copystring, param_get_string,	\
+		   &__param_string_##name, perm);			\
+	__MODULE_PARM_TYPE(name, "string")
+
+/* Called on module insert or kernel boot */
+extern int parse_args(const char *name,
+		      char *args,
+		      struct kernel_param *params,
+		      unsigned num,
+		      int (*unknown)(char *param, char *val));
+
+/* All the helper functions */
+/* The macros to do compile-time type checking stolen from Jakub
+   Jelinek, who IIRC came up with this idea for the 2.4 module init code. */
+#define __param_check(name, p, type) \
+	static inline type *__check_##name(void) { return(p); }
+
+extern int param_set_byte(const char *val, struct kernel_param *kp);
+extern int param_get_byte(char *buffer, struct kernel_param *kp);
+#define param_check_byte(name, p) __param_check(name, p, unsigned char)
+
+extern int param_set_short(const char *val, struct kernel_param *kp);
+extern int param_get_short(char *buffer, struct kernel_param *kp);
+#define param_check_short(name, p) __param_check(name, p, short)
+
+extern int param_set_ushort(const char *val, struct kernel_param *kp);
+extern int param_get_ushort(char *buffer, struct kernel_param *kp);
+#define param_check_ushort(name, p) __param_check(name, p, unsigned short)
+
+extern int param_set_int(const char *val, struct kernel_param *kp);
+extern int param_get_int(char *buffer, struct kernel_param *kp);
+#define param_check_int(name, p) __param_check(name, p, int)
+
+extern int param_set_uint(const char *val, struct kernel_param *kp);
+extern int param_get_uint(char *buffer, struct kernel_param *kp);
+#define param_check_uint(name, p) __param_check(name, p, unsigned int)
+
+extern int param_set_long(const char *val, struct kernel_param *kp);
+extern int param_get_long(char *buffer, struct kernel_param *kp);
+#define param_check_long(name, p) __param_check(name, p, long)
+
+extern int param_set_ulong(const char *val, struct kernel_param *kp);
+extern int param_get_ulong(char *buffer, struct kernel_param *kp);
+#define param_check_ulong(name, p) __param_check(name, p, unsigned long)
+
+extern int param_set_charp(const char *val, struct kernel_param *kp);
+extern int param_get_charp(char *buffer, struct kernel_param *kp);
+#define param_check_charp(name, p) __param_check(name, p, char *)
+
+extern int param_set_bool(const char *val, struct kernel_param *kp);
+extern int param_get_bool(char *buffer, struct kernel_param *kp);
+#define param_check_bool(name, p) __param_check(name, p, int)
+
+extern int param_set_invbool(const char *val, struct kernel_param *kp);
+extern int param_get_invbool(char *buffer, struct kernel_param *kp);
+#define param_check_invbool(name, p) __param_check(name, p, int)
+
+/* Comma-separated array: *nump is set to number they actually specified. */
+#define module_param_array_named(name, array, type, nump, perm)		\
+	static struct kparam_array __param_arr_##name			\
+	= { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\
+	    sizeof(array[0]), array };					\
+	module_param_call(name, param_array_set, param_array_get, 	\
+			  &__param_arr_##name, perm);			\
+	__MODULE_PARM_TYPE(name, "array of " #type)
+
+#define module_param_array(name, type, nump, perm)		\
+	module_param_array_named(name, name, type, nump, perm)
+
+extern int param_array_set(const char *val, struct kernel_param *kp);
+extern int param_array_get(char *buffer, struct kernel_param *kp);
+
+extern int param_set_copystring(const char *val, struct kernel_param *kp);
+extern int param_get_string(char *buffer, struct kernel_param *kp);
+
+int param_array(const char *name,
+		const char *val,
+		unsigned int min, unsigned int max,
+		void *elem, int elemsize,
+		int (*set)(const char *, struct kernel_param *kp),
+		int *num);
+
+/* for exporting parameters in /sys/parameters */
+
+struct module;
+
+extern int module_param_sysfs_setup(struct module *mod,
+				    struct kernel_param *kparam,
+				    unsigned int num_params);
+
+extern void module_param_sysfs_remove(struct module *mod);
+
+#endif /* _LINUX_MODULE_PARAMS_H */
diff --git a/include/linux/mount.h b/include/linux/mount.h
new file mode 100644
index 000000000000..8b8d3b9beefd
--- /dev/null
+++ b/include/linux/mount.h
@@ -0,0 +1,81 @@
+/*
+ *
+ * Definitions for mount interface. This describes the in the kernel build 
+ * linkedlist with mounted filesystems.
+ *
+ * Author:  Marco van Wieringen <mvw@planets.elm.net>
+ *
+ * Version: $Id: mount.h,v 2.0 1996/11/17 16:48:14 mvw Exp mvw $
+ *
+ */
+#ifndef _LINUX_MOUNT_H
+#define _LINUX_MOUNT_H
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#define MNT_NOSUID	1
+#define MNT_NODEV	2
+#define MNT_NOEXEC	4
+
+struct vfsmount
+{
+	struct list_head mnt_hash;
+	struct vfsmount *mnt_parent;	/* fs we are mounted on */
+	struct dentry *mnt_mountpoint;	/* dentry of mountpoint */
+	struct dentry *mnt_root;	/* root of the mounted tree */
+	struct super_block *mnt_sb;	/* pointer to superblock */
+	struct list_head mnt_mounts;	/* list of children, anchored here */
+	struct list_head mnt_child;	/* and going through their mnt_child */
+	atomic_t mnt_count;
+	int mnt_flags;
+	int mnt_expiry_mark;		/* true if marked for expiry */
+	char *mnt_devname;		/* Name of device e.g. /dev/dsk/hda1 */
+	struct list_head mnt_list;
+	struct list_head mnt_fslink;	/* link in fs-specific expiry list */
+	struct namespace *mnt_namespace; /* containing namespace */
+};
+
+static inline struct vfsmount *mntget(struct vfsmount *mnt)
+{
+	if (mnt)
+		atomic_inc(&mnt->mnt_count);
+	return mnt;
+}
+
+extern void __mntput(struct vfsmount *mnt);
+
+static inline void _mntput(struct vfsmount *mnt)
+{
+	if (mnt) {
+		if (atomic_dec_and_test(&mnt->mnt_count))
+			__mntput(mnt);
+	}
+}
+
+static inline void mntput(struct vfsmount *mnt)
+{
+	if (mnt) {
+		mnt->mnt_expiry_mark = 0;
+		_mntput(mnt);
+	}
+}
+
+extern void free_vfsmnt(struct vfsmount *mnt);
+extern struct vfsmount *alloc_vfsmnt(const char *name);
+extern struct vfsmount *do_kern_mount(const char *fstype, int flags,
+				      const char *name, void *data);
+
+struct nameidata;
+
+extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+			int mnt_flags, struct list_head *fslist);
+
+extern void mark_mounts_for_expiry(struct list_head *mounts);
+
+extern spinlock_t vfsmount_lock;
+
+#endif
+#endif /* _LINUX_MOUNT_H */
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
new file mode 100644
index 000000000000..dea1b0083661
--- /dev/null
+++ b/include/linux/mpage.h
@@ -0,0 +1,31 @@
+/*
+ * include/linux/mpage.h
+ *
+ * Contains declarations related to preparing and submitting BIOS which contain
+ * multiple pagecache pages.
+ */
+
+/*
+ * (And no, it doesn't do the #ifdef __MPAGE_H thing, and it doesn't do
+ * nested includes.  Get it right in the .c file).
+ */
+
+struct writeback_control;
+typedef int (writepage_t)(struct page *page, struct writeback_control *wbc);
+
+int mpage_readpages(struct address_space *mapping, struct list_head *pages,
+				unsigned nr_pages, get_block_t get_block);
+int mpage_readpage(struct page *page, get_block_t get_block);
+int mpage_writepages(struct address_space *mapping,
+		struct writeback_control *wbc, get_block_t get_block);
+int mpage_writepage(struct page *page, get_block_t *get_block,
+		struct writeback_control *wbc);
+int __mpage_writepages(struct address_space *mapping,
+		struct writeback_control *wbc, get_block_t get_block,
+		writepage_t writepage);
+
+static inline int
+generic_writepages(struct address_space *mapping, struct writeback_control *wbc)
+{
+	return mpage_writepages(mapping, wbc, NULL);
+}
diff --git a/include/linux/mqueue.h b/include/linux/mqueue.h
new file mode 100644
index 000000000000..8db9d75541a6
--- /dev/null
+++ b/include/linux/mqueue.h
@@ -0,0 +1,55 @@
+/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   It is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this software; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
+
+#ifndef _LINUX_MQUEUE_H
+#define _LINUX_MQUEUE_H
+
+#include <linux/types.h>
+
+#define MQ_PRIO_MAX 	32768
+/* per-uid limit of kernel memory used by mqueue, in bytes */
+#define MQ_BYTES_MAX	819200
+
+struct mq_attr {
+	long	mq_flags;	/* message queue flags			*/
+	long	mq_maxmsg;	/* maximum number of messages		*/
+	long	mq_msgsize;	/* maximum message size			*/
+	long	mq_curmsgs;	/* number of messages currently queued	*/
+	long	__reserved[4];	/* ignored for input, zeroed for output */
+};
+
+/*
+ * SIGEV_THREAD implementation:
+ * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
+ * to mq_notify, then
+ * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
+ *   necessary that the socket is bound.
+ * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
+ *   bytes long.
+ * If the notification is triggered, then the cookie is sent to the netlink
+ * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
+ * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
+ * removed, either due to a close() on the message queue fd or due to a
+ * mq_notify() that removed the notification.
+ */
+#define NOTIFY_NONE	0
+#define NOTIFY_WOKENUP	1
+#define NOTIFY_REMOVED	2
+
+#define NOTIFY_COOKIE_LEN	32
+
+#endif
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
new file mode 100644
index 000000000000..e05d54a90743
--- /dev/null
+++ b/include/linux/mroute.h
@@ -0,0 +1,226 @@
+#ifndef __LINUX_MROUTE_H
+#define __LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/in.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the mrouted code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE	200
+#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
+#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
+#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code	*/
+
+#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS		32	
+typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS	((vifi_t)(-1))
+
+/*
+ *	Same idea as select
+ */
+ 
+#define VIFM_SET(n,m)	((m)|=(1<<(n)))
+#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
+#define VIFM_CLRALL(m)	((m)=0)
+#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
+#define VIFM_SAME(m1,m2)	((m1)==(m2))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_VIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+ 
+struct vifctl {
+	vifi_t	vifc_vifi;		/* Index of VIF */
+	unsigned char vifc_flags;	/* VIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+	struct in_addr vifc_lcl_addr;	/* Our address */
+	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL	0x1	/* IPIP tunnel */
+#define VIFF_SRCRT	0x2	/* NI */
+#define VIFF_REGISTER	0x4	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+ 
+struct mfcctl
+{
+	struct in_addr mfcc_origin;		/* Origin of mcast	*/
+	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
+	vifi_t	mfcc_parent;			/* Where it arrived	*/
+	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
+	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
+	unsigned int mfcc_byte_cnt;
+	unsigned int mfcc_wrong_if;
+	int	     mfcc_expire;
+};
+
+/* 
+ *	Group count retrieval for mrouted
+ */
+ 
+struct sioc_sg_req
+{
+	struct in_addr src;
+	struct in_addr grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_vif_req
+{
+	vifi_t	vifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	This is the format the mroute daemon expects to see IGMP control
+ *	data. Magically happens to be like an IP packet as per the original
+ */
+ 
+struct igmpmsg
+{
+	__u32 unused1,unused2;
+	unsigned char im_msgtype;		/* What is this */
+	unsigned char im_mbz;			/* Must be zero */
+	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
+	unsigned char unused3;
+	struct in_addr im_src,im_dst;
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+#ifdef __KERNEL__
+#include <net/sock.h>
+
+extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
+extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
+extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
+extern void ip_mr_init(void);
+
+
+struct vif_device
+{
+	struct net_device 	*dev;			/* Device we are using */
+	unsigned long	bytes_in,bytes_out;
+	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
+	unsigned long	rate_limit;		/* Traffic shaping (NI) 	*/
+	unsigned char	threshold;		/* TTL threshold 		*/
+	unsigned short	flags;			/* Control flags 		*/
+	__u32		local,remote;		/* Addresses(remote for tunnels)*/
+	int		link;			/* Physical interface index	*/
+};
+
+#define VIFF_STATIC 0x8000
+
+struct mfc_cache 
+{
+	struct mfc_cache *next;			/* Next entry on cache line 	*/
+	__u32 mfc_mcastgrp;			/* Group the entry belongs to 	*/
+	__u32 mfc_origin;			/* Source of packet 		*/
+	vifi_t mfc_parent;			/* Source interface		*/
+	int mfc_flags;				/* Flags on line		*/
+
+	union {
+		struct {
+			unsigned long expires;
+			struct sk_buff_head unresolved;	/* Unresolved buffers		*/
+		} unres;
+		struct {
+			unsigned long last_assert;
+			int minvif;
+			int maxvif;
+			unsigned long bytes;
+			unsigned long pkt;
+			unsigned long wrong_if;
+			unsigned char ttls[MAXVIFS];	/* TTL thresholds		*/
+		} res;
+	} mfc_un;
+};
+
+#define MFC_STATIC		1
+#define MFC_NOTIFY		2
+
+#define MFC_LINES		64
+
+#ifdef __BIG_ENDIAN
+#define MFC_HASH(a,b)	((((a)>>24)^((b)>>26))&(MFC_LINES-1))
+#else
+#define MFC_HASH(a,b)	(((a)^((b)>>2))&(MFC_LINES-1))
+#endif		
+
+#endif
+
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+/*
+ *	Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
+
+#ifdef __KERNEL__
+
+#define PIM_V1_VERSION		__constant_htonl(0x10000000)
+#define PIM_V1_REGISTER		1
+
+#define PIM_VERSION		2
+#define PIM_REGISTER		1
+
+#define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
+
+/* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
+
+struct pimreghdr
+{
+	__u8	type;
+	__u8	reserved;
+	__u16	csum;
+	__u32	flags;
+};
+
+extern int pim_rcv_v1(struct sk_buff *);
+
+struct rtmsg;
+extern int ipmr_get_route(struct sk_buff *skb, struct rtmsg *rtm, int nowait);
+#endif
+
+#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
new file mode 100644
index 000000000000..9a3d27257984
--- /dev/null
+++ b/include/linux/msdos_fs.h
@@ -0,0 +1,412 @@
+#ifndef _LINUX_MSDOS_FS_H
+#define _LINUX_MSDOS_FS_H
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+#include <asm/byteorder.h>
+
+#define SECTOR_SIZE	512		/* sector size (bytes) */
+#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
+#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
+#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
+#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define CF_LE_W(v)	le16_to_cpu(v)
+#define CF_LE_L(v)	le32_to_cpu(v)
+#define CT_LE_W(v)	cpu_to_le16(v)
+#define CT_LE_L(v)	cpu_to_le32(v)
+
+
+#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */
+
+#define MSDOS_ROOT_INO	1	/* == MINIX_ROOT_INO */
+#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES	(65536)
+#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE	0	/* no attribute bits */
+#define ATTR_RO		1	/* read-only */
+#define ATTR_HIDDEN	2	/* hidden */
+#define ATTR_SYS	4	/* system */
+#define ATTR_VOLUME	8	/* volume label */
+#define ATTR_DIR	16	/* directory */
+#define ATTR_ARCH	32	/* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE	8	/* base is lower case */
+#define CASE_LOWER_EXT	16	/* extension is lower case */
+
+#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
+#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
+
+/* valid file mode bits */
+#define MSDOS_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXU | S_IRWXG | S_IRWXO)
+/* Convert attribute bits and a mask to the UNIX mode. */
+#define MSDOS_MKMODE(a, m) (m & (a & ATTR_RO ? S_IRUGO|S_IXUGO : S_IRWXUGO))
+
+#define MSDOS_NAME	11	/* maximum name length */
+#define MSDOS_LONGNAME	256	/* maximum name length */
+#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
+#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+
+/* media of boot sector */
+#define FAT_VALID_MEDIA(x)	((0xF8 <= (x) && (x) <= 0xFF) || (x) == 0xF0)
+#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT	2
+
+/* maximum number of clusters */
+#define MAX_FAT12	0xFF4
+#define MAX_FAT16	0xFFF4
+#define MAX_FAT32	0x0FFFFFF6
+#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12	0xFF7
+#define BAD_FAT16	0xFFF7
+#define BAD_FAT32	0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12	0xFFF
+#define EOF_FAT16	0xFFFF
+#define EOF_FAT32	0x0FFFFFFF
+
+#define FAT_ENT_FREE	(0)
+#define FAT_ENT_BAD	(BAD_FAT32)
+#define FAT_ENT_EOF	(EOF_FAT32)
+
+#define FAT_FSINFO_SIG1	0x41615252
+#define FAT_FSINFO_SIG2	0x61417272
+#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct dirent [2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct dirent [2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
+
+/*
+ * vfat shortname flags
+ */
+#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
+#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
+#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
+#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
+#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
+
+struct fat_boot_sector {
+	__u8	ignored[3];	/* Boot strap short or near jump */
+	__u8	system_id[8];	/* Name - can be used to special case
+				   partition manager volumes */
+	__u8	sector_size[2];	/* bytes per logical sector */
+	__u8	sec_per_clus;	/* sectors/cluster */
+	__le16	reserved;	/* reserved sectors */
+	__u8	fats;		/* number of FATs */
+	__u8	dir_entries[2];	/* root directory entries */
+	__u8	sectors[2];	/* number of sectors */
+	__u8	media;		/* media code */
+	__le16	fat_length;	/* sectors/FAT */
+	__le16	secs_track;	/* sectors per track */
+	__le16	heads;		/* number of heads */
+	__le32	hidden;		/* hidden sectors (unused) */
+	__le32	total_sect;	/* number of sectors (if sectors == 0) */
+
+	/* The following fields are only used by FAT32 */
+	__le32	fat32_length;	/* sectors/FAT */
+	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
+	__u8	version[2];	/* major, minor filesystem version */
+	__le32	root_cluster;	/* first cluster in root directory */
+	__le16	info_sector;	/* filesystem info sector */
+	__le16	backup_boot;	/* backup boot sector */
+	__le16	reserved2[6];	/* Unused */
+};
+
+struct fat_boot_fsinfo {
+	__le32   signature1;	/* 0x41615252L */
+	__le32   reserved1[120];	/* Nothing as far as I can tell */
+	__le32   signature2;	/* 0x61417272L */
+	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
+	__le32   next_cluster;	/* Most recently allocated cluster */
+	__le32   reserved2[4];
+};
+
+struct msdos_dir_entry {
+	__u8	name[8],ext[3];	/* name and extension */
+	__u8	attr;		/* attribute bits */
+	__u8    lcase;		/* Case for base and extension */
+	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
+	__le16	ctime;		/* Creation time */
+	__le16	cdate;		/* Creation date */
+	__le16	adate;		/* Last access date */
+	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
+	__le16	time,date,start;/* time, date and first cluster */
+	__le32	size;		/* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+	__u8    id;		/* sequence number for slot */
+	__u8    name0_4[10];	/* first 5 characters in name */
+	__u8    attr;		/* attribute byte */
+	__u8    reserved;	/* always 0 */
+	__u8    alias_checksum;	/* checksum for 8.3 alias */
+	__u8    name5_10[12];	/* 6 more characters in name */
+	__le16   start;		/* starting cluster number, 0 in long slots */
+	__u8    name11_12[4];	/* last 2 characters in name */
+};
+
+struct fat_slot_info {
+	loff_t i_pos;		/* on-disk position of directory entry */
+	loff_t slot_off;	/* offset for slot or de start */
+	int nr_slots;		/* number of slots + 1(de) in filename */
+	struct msdos_dir_entry *de;
+	struct buffer_head *bh;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/buffer_head.h>
+#include <linux/string.h>
+#include <linux/nls.h>
+#include <linux/fs.h>
+
+struct fat_mount_options {
+	uid_t fs_uid;
+	gid_t fs_gid;
+	unsigned short fs_fmask;
+	unsigned short fs_dmask;
+	unsigned short codepage;  /* Codepage for shortname conversions */
+	char *iocharset;          /* Charset used for filename input/display */
+	unsigned short shortname; /* flags for shortname display/create rule */
+	unsigned char name_check; /* r = relaxed, n = normal, s = strict */
+	unsigned quiet:1,         /* set = fake successful chmods and chowns */
+		 showexec:1,      /* set = only set x bit for com/exe/bat */
+		 sys_immutable:1, /* set = system files are immutable */
+		 dotsOK:1,        /* set = hidden and system files are named '.filename' */
+		 isvfat:1,        /* 0=no vfat long filename support, 1=vfat support */
+		 utf8:1,	  /* Use of UTF8 character set (Default) */
+		 unicode_xlate:1, /* create escape sequences for unhandled Unicode */
+		 numtail:1,       /* Does first alias have a numeric '~1' type tail? */
+		 atari:1,         /* Use Atari GEMDOS variation of MS-DOS fs */
+		 nocase:1;	  /* Does this need case conversion? 0=need case conversion*/
+};
+
+#define FAT_HASH_BITS	8
+#define FAT_HASH_SIZE	(1UL << FAT_HASH_BITS)
+#define FAT_HASH_MASK	(FAT_HASH_SIZE-1)
+
+/*
+ * MS-DOS file system in-core superblock data
+ */
+struct msdos_sb_info {
+	unsigned short sec_per_clus; /* sectors/cluster */
+	unsigned short cluster_bits; /* log2(cluster_size) */
+	unsigned int cluster_size;   /* cluster size */
+	unsigned char fats,fat_bits; /* number of FATs, FAT bits (12 or 16) */
+	unsigned short fat_start;
+	unsigned long fat_length;    /* FAT start & length (sec.) */
+	unsigned long dir_start;
+	unsigned short dir_entries;  /* root dir start & entries */
+	unsigned long data_start;    /* first data sector */
+	unsigned long max_cluster;   /* maximum cluster number */
+	unsigned long root_cluster;  /* first cluster of the root directory */
+	unsigned long fsinfo_sector; /* sector number of FAT32 fsinfo */
+	struct semaphore fat_lock;
+	unsigned int prev_free;      /* previously allocated cluster number */
+	unsigned int free_clusters;  /* -1 if undefined */
+	struct fat_mount_options options;
+	struct nls_table *nls_disk;  /* Codepage used on disk */
+	struct nls_table *nls_io;    /* Charset used for input and display */
+	void *dir_ops;		     /* Opaque; default directory operations */
+	int dir_per_block;	     /* dir entries per block */
+	int dir_per_block_bits;	     /* log2(dir_per_block) */
+
+	int fatent_shift;
+	struct fatent_operations *fatent_ops;
+
+	spinlock_t inode_hash_lock;
+	struct hlist_head inode_hashtable[FAT_HASH_SIZE];
+};
+
+#define FAT_CACHE_VALID	0	/* special case for valid cache */
+
+/*
+ * MS-DOS file system inode data in memory
+ */
+struct msdos_inode_info {
+	spinlock_t cache_lru_lock;
+	struct list_head cache_lru;
+	int nr_caches;
+	/* for avoiding the race between fat_free() and fat_get_cluster() */
+	unsigned int cache_valid_id;
+
+	loff_t mmu_private;
+	int i_start;		/* first cluster or 0 */
+	int i_logstart;		/* logical first cluster */
+	int i_attrs;		/* unused attribute bits */
+	loff_t i_pos;		/* on-disk position of directory entry or 0 */
+	struct hlist_node i_fat_hash;	/* hash by i_location */
+	struct inode vfs_inode;
+};
+
+static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct msdos_inode_info *MSDOS_I(struct inode *inode)
+{
+	return container_of(inode, struct msdos_inode_info, vfs_inode);
+}
+
+/* Return the FAT attribute byte for this inode */
+static inline u8 fat_attr(struct inode *inode)
+{
+	return ((inode->i_mode & S_IWUGO) ? ATTR_NONE : ATTR_RO) |
+		(S_ISDIR(inode->i_mode) ? ATTR_DIR : ATTR_NONE) |
+		MSDOS_I(inode)->i_attrs;
+}
+
+static inline sector_t fat_clus_to_blknr(struct msdos_sb_info *sbi, int clus)
+{
+	return ((sector_t)clus - FAT_START_ENT) * sbi->sec_per_clus
+		+ sbi->data_start;
+}
+
+static inline void fat16_towchar(wchar_t *dst, const __u8 *src, size_t len)
+{
+#ifdef __BIG_ENDIAN
+	while (len--) {
+		*dst++ = src[0] | (src[1] << 8);
+		src += 2;
+	}
+#else
+	memcpy(dst, src, len * 2);
+#endif
+}
+
+static inline void fatwchar_to16(__u8 *dst, const wchar_t *src, size_t len)
+{
+#ifdef __BIG_ENDIAN
+	while (len--) {
+		dst[0] = *src & 0x00FF;
+		dst[1] = (*src & 0xFF00) >> 8;
+		dst += 2;
+		src++;
+	}
+#else
+	memcpy(dst, src, len * 2);
+#endif
+}
+
+/* fat/cache.c */
+extern void fat_cache_inval_inode(struct inode *inode);
+extern int fat_get_cluster(struct inode *inode, int cluster,
+			   int *fclus, int *dclus);
+extern int fat_bmap(struct inode *inode, sector_t sector, sector_t *phys);
+
+/* fat/dir.c */
+extern struct file_operations fat_dir_operations;
+extern int fat_search_long(struct inode *inode, const unsigned char *name,
+			   int name_len, struct fat_slot_info *sinfo);
+extern int fat_dir_empty(struct inode *dir);
+extern int fat_subdirs(struct inode *dir);
+extern int fat_scan(struct inode *dir, const unsigned char *name,
+		    struct fat_slot_info *sinfo);
+extern int fat_get_dotdot_entry(struct inode *dir, struct buffer_head **bh,
+				struct msdos_dir_entry **de, loff_t *i_pos);
+extern int fat_alloc_new_dir(struct inode *dir, struct timespec *ts);
+extern int fat_add_entries(struct inode *dir, void *slots, int nr_slots,
+			   struct fat_slot_info *sinfo);
+extern int fat_remove_entries(struct inode *dir, struct fat_slot_info *sinfo);
+
+/* fat/fatent.c */
+struct fat_entry {
+	int entry;
+	union {
+		u8 *ent12_p[2];
+		__le16 *ent16_p;
+		__le32 *ent32_p;
+	} u;
+	int nr_bhs;
+	struct buffer_head *bhs[2];
+};
+
+static inline void fatent_init(struct fat_entry *fatent)
+{
+	fatent->nr_bhs = 0;
+	fatent->entry = 0;
+	fatent->u.ent32_p = NULL;
+	fatent->bhs[0] = fatent->bhs[1] = NULL;
+}
+
+static inline void fatent_set_entry(struct fat_entry *fatent, int entry)
+{
+	fatent->entry = entry;
+	fatent->u.ent32_p = NULL;
+}
+
+static inline void fatent_brelse(struct fat_entry *fatent)
+{
+	int i;
+	fatent->u.ent32_p = NULL;
+	for (i = 0; i < fatent->nr_bhs; i++)
+		brelse(fatent->bhs[i]);
+	fatent->nr_bhs = 0;
+	fatent->bhs[0] = fatent->bhs[1] = NULL;
+}
+
+extern void fat_ent_access_init(struct super_block *sb);
+extern int fat_ent_read(struct inode *inode, struct fat_entry *fatent,
+			int entry);
+extern int fat_ent_write(struct inode *inode, struct fat_entry *fatent,
+			 int new, int wait);
+extern int fat_alloc_clusters(struct inode *inode, int *cluster,
+			      int nr_cluster);
+extern int fat_free_clusters(struct inode *inode, int cluster);
+extern int fat_count_free_clusters(struct super_block *sb);
+
+/* fat/file.c */
+extern int fat_generic_ioctl(struct inode *inode, struct file *filp,
+			     unsigned int cmd, unsigned long arg);
+extern struct file_operations fat_file_operations;
+extern struct inode_operations fat_file_inode_operations;
+extern int fat_notify_change(struct dentry * dentry, struct iattr * attr);
+extern void fat_truncate(struct inode *inode);
+
+/* fat/inode.c */
+extern void fat_attach(struct inode *inode, loff_t i_pos);
+extern void fat_detach(struct inode *inode);
+extern struct inode *fat_iget(struct super_block *sb, loff_t i_pos);
+extern struct inode *fat_build_inode(struct super_block *sb,
+			struct msdos_dir_entry *de, loff_t i_pos);
+extern int fat_sync_inode(struct inode *inode);
+extern int fat_fill_super(struct super_block *sb, void *data, int silent,
+			struct inode_operations *fs_dir_inode_ops, int isvfat);
+
+/* fat/misc.c */
+extern void fat_fs_panic(struct super_block *s, const char *fmt, ...);
+extern void fat_clusters_flush(struct super_block *sb);
+extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
+extern int date_dos2unix(unsigned short time, unsigned short date);
+extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date);
+extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/msg.h b/include/linux/msg.h
new file mode 100644
index 000000000000..2c4c6aa643ff
--- /dev/null
+++ b/include/linux/msg.h
@@ -0,0 +1,96 @@
+#ifndef _LINUX_MSG_H
+#define _LINUX_MSG_H
+
+#include <linux/ipc.h>
+#include <linux/list.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR     010000  /* no error if message is too big */
+#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+	struct ipc_perm msg_perm;
+	struct msg *msg_first;		/* first message on queue,unused  */
+	struct msg *msg_last;		/* last message in queue,unused */
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
+	unsigned long  msg_lqbytes;	/* ditto */
+	unsigned short msg_cbytes;	/* current number of bytes on queue */
+	unsigned short msg_qnum;	/* number of messages in queue */
+	unsigned short msg_qbytes;	/* max number of bytes on queue */
+	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+	long mtype;         /* type of message */
+	char mtext[1];      /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+	int msgpool;
+	int msgmap; 
+	int msgmax; 
+	int msgmnb; 
+	int msgmni; 
+	int msgssz; 
+	int msgtql; 
+	unsigned short  msgseg; 
+};
+
+#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
+#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
+#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI*MSGMNB/1024)  /* size in kilobytes of message pool */
+#define MSGTQL  MSGMNB            /* number of system message headers */
+#define MSGMAP  MSGMNB            /* number of entries in message map */
+#define MSGSSZ  16                /* message segment size */
+#define __MSGSEG ((MSGPOOL*1024)/ MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+#ifdef __KERNEL__
+
+/* one msg_msg structure for each message */
+struct msg_msg {
+	struct list_head m_list; 
+	long  m_type;          
+	int m_ts;           /* message text size */
+	struct msg_msgseg* next;
+	void *security;
+	/* the actual message follows immediately */
+};
+
+/* one msq_queue structure for each present queue on the system */
+struct msg_queue {
+	struct kern_ipc_perm q_perm;
+	time_t q_stime;			/* last msgsnd time */
+	time_t q_rtime;			/* last msgrcv time */
+	time_t q_ctime;			/* last change time */
+	unsigned long q_cbytes;		/* current number of bytes on queue */
+	unsigned long q_qnum;		/* number of messages in queue */
+	unsigned long q_qbytes;		/* max number of bytes on queue */
+	pid_t q_lspid;			/* pid of last msgsnd */
+	pid_t q_lrpid;			/* last receive pid */
+
+	struct list_head q_messages;
+	struct list_head q_receivers;
+	struct list_head q_senders;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MSG_H */
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
new file mode 100644
index 000000000000..4ebc2e5a16e2
--- /dev/null
+++ b/include/linux/mtd/blktrans.h
@@ -0,0 +1,72 @@
+/*
+ * $Id: blktrans.h,v 1.5 2003/06/23 12:00:08 dwmw2 Exp $
+ *
+ * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Interface to Linux block layer for MTD 'translation layers'.
+ *
+ */
+
+#ifndef __MTD_TRANS_H__
+#define __MTD_TRANS_H__
+
+#include <asm/semaphore.h>
+
+struct hd_geometry;
+struct mtd_info;
+struct mtd_blktrans_ops;
+struct file;
+struct inode;
+
+struct mtd_blktrans_dev {
+	struct mtd_blktrans_ops *tr;
+	struct list_head list;
+	struct mtd_info *mtd;
+	struct semaphore sem;
+	int devnum;
+	int blksize;
+	unsigned long size;
+	int readonly;
+	void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */
+};
+
+struct blkcore_priv; /* Differs for 2.4 and 2.5 kernels; private */
+
+struct mtd_blktrans_ops {
+	char *name;
+	int major;
+	int part_bits;
+
+	/* Access functions */
+	int (*readsect)(struct mtd_blktrans_dev *dev,
+		    unsigned long block, char *buffer);
+	int (*writesect)(struct mtd_blktrans_dev *dev,
+		     unsigned long block, char *buffer);
+
+	/* Block layer ioctls */
+	int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
+	int (*flush)(struct mtd_blktrans_dev *dev);
+
+	/* Called with mtd_table_mutex held; no race with add/remove */
+	int (*open)(struct mtd_blktrans_dev *dev);
+	int (*release)(struct mtd_blktrans_dev *dev);
+
+	/* Called on {de,}registration and on subsequent addition/removal
+	   of devices, with mtd_table_mutex held. */
+	void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd);
+	void (*remove_dev)(struct mtd_blktrans_dev *dev);
+
+	struct list_head devs;
+	struct list_head list;
+	struct module *owner;
+
+	struct mtd_blkcore_priv *blkcore_priv;
+};
+
+extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+				 
+
+#endif /* __MTD_TRANS_H__ */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
new file mode 100644
index 000000000000..2ed8c585021e
--- /dev/null
+++ b/include/linux/mtd/cfi.h
@@ -0,0 +1,394 @@
+
+/* Common Flash Interface structures 
+ * See http://support.intel.com/design/flash/technote/index.htm
+ * $Id: cfi.h,v 1.50 2004/11/20 12:46:51 dwmw2 Exp $
+ */
+
+#ifndef __MTD_CFI_H__
+#define __MTD_CFI_H__
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi_endian.h>
+
+#ifdef CONFIG_MTD_CFI_I1
+#define cfi_interleave(cfi) 1
+#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1)
+#else
+#define cfi_interleave_is_1(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I2
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 2
+# endif
+#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2)
+#else
+#define cfi_interleave_is_2(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I4
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 4
+# endif
+#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4)
+#else
+#define cfi_interleave_is_4(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I8
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 8
+# endif
+#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8)
+#else
+#define cfi_interleave_is_8(cfi) (0)
+#endif
+
+static inline int cfi_interleave_supported(int i)
+{
+	switch (i) {
+#ifdef CONFIG_MTD_CFI_I1
+	case 1:
+#endif
+#ifdef CONFIG_MTD_CFI_I2
+	case 2:
+#endif
+#ifdef CONFIG_MTD_CFI_I4
+	case 4:
+#endif
+#ifdef CONFIG_MTD_CFI_I8
+	case 8:
+#endif
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+
+/* NB: these values must represents the number of bytes needed to meet the 
+ *     device type (x8, x16, x32).  Eg. a 32 bit device is 4 x 8 bytes. 
+ *     These numbers are used in calculations.
+ */
+#define CFI_DEVICETYPE_X8  (8 / 8)
+#define CFI_DEVICETYPE_X16 (16 / 8)
+#define CFI_DEVICETYPE_X32 (32 / 8)
+#define CFI_DEVICETYPE_X64 (64 / 8)
+
+/* NB: We keep these structures in memory in HOST byteorder, except
+ * where individually noted.
+ */
+
+/* Basic Query Structure */
+struct cfi_ident {
+	uint8_t  qry[3];
+	uint16_t P_ID;
+	uint16_t P_ADR;
+	uint16_t A_ID;
+	uint16_t A_ADR;
+	uint8_t  VccMin;
+	uint8_t  VccMax;
+	uint8_t  VppMin;
+	uint8_t  VppMax;
+	uint8_t  WordWriteTimeoutTyp;
+	uint8_t  BufWriteTimeoutTyp;
+	uint8_t  BlockEraseTimeoutTyp;
+	uint8_t  ChipEraseTimeoutTyp;
+	uint8_t  WordWriteTimeoutMax;
+	uint8_t  BufWriteTimeoutMax;
+	uint8_t  BlockEraseTimeoutMax;
+	uint8_t  ChipEraseTimeoutMax;
+	uint8_t  DevSize;
+	uint16_t InterfaceDesc;
+	uint16_t MaxBufWriteSize;
+	uint8_t  NumEraseRegions;
+	uint32_t EraseRegionInfo[0]; /* Not host ordered */
+} __attribute__((packed));
+
+/* Extended Query Structure for both PRI and ALT */
+
+struct cfi_extquery {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */
+
+struct cfi_pri_intelext {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+	uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature
+				    block follows - FIXME - not currently supported */
+	uint8_t  SuspendCmdSupport;
+	uint16_t BlkStatusRegMask;
+	uint8_t  VccOptimal;
+	uint8_t  VppOptimal;
+	uint8_t  NumProtectionFields;
+	uint16_t ProtRegAddr;
+	uint8_t  FactProtRegSize;
+	uint8_t  UserProtRegSize;
+	uint8_t  extra[0];
+} __attribute__((packed));
+
+struct cfi_intelext_blockinfo {
+	uint16_t NumIdentBlocks;
+	uint16_t BlockSize;
+	uint16_t MinBlockEraseCycles;
+	uint8_t  BitsPerCell;
+	uint8_t  BlockCap;
+} __attribute__((packed));
+
+struct cfi_intelext_regioninfo {
+	uint16_t NumIdentPartitions;
+	uint8_t  NumOpAllowed;
+	uint8_t  NumOpAllowedSimProgMode;
+	uint8_t  NumOpAllowedSimEraMode;
+	uint8_t  NumBlockTypes;
+	struct cfi_intelext_blockinfo BlockTypes[1];
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */
+
+struct cfi_pri_amdstd {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+	uint8_t  SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
+	uint8_t  EraseSuspend;
+	uint8_t  BlkProt;
+	uint8_t  TmpBlkUnprotect;
+	uint8_t  BlkProtUnprot;
+	uint8_t  SimultaneousOps;
+	uint8_t  BurstMode;
+	uint8_t  PageMode;
+	uint8_t  VppMin;
+	uint8_t  VppMax;
+	uint8_t  TopBottom;
+} __attribute__((packed));
+
+struct cfi_pri_query {
+	uint8_t  NumFields;
+	uint32_t ProtField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+struct cfi_bri_query {
+	uint8_t  PageModeReadCap;
+	uint8_t  NumFields;
+	uint32_t ConfField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+#define P_ID_NONE               0x0000
+#define P_ID_INTEL_EXT          0x0001
+#define P_ID_AMD_STD            0x0002
+#define P_ID_INTEL_STD          0x0003
+#define P_ID_AMD_EXT            0x0004
+#define P_ID_WINBOND            0x0006
+#define P_ID_ST_ADV             0x0020
+#define P_ID_MITSUBISHI_STD     0x0100
+#define P_ID_MITSUBISHI_EXT     0x0101
+#define P_ID_SST_PAGE           0x0102
+#define P_ID_INTEL_PERFORMANCE  0x0200
+#define P_ID_INTEL_DATA         0x0210
+#define P_ID_RESERVED           0xffff
+
+
+#define CFI_MODE_CFI	1
+#define CFI_MODE_JEDEC	0
+
+struct cfi_private {
+	uint16_t cmdset;
+	void *cmdset_priv;
+	int interleave;
+	int device_type;
+	int cfi_mode;		/* Are we a JEDEC device pretending to be CFI? */
+	int addr_unlock1;
+	int addr_unlock2;
+	struct mtd_info *(*cmdset_setup)(struct map_info *);
+	struct cfi_ident *cfiq; /* For now only one. We insist that all devs
+				  must be of the same type. */
+	int mfr, id;
+	int numchips;
+	unsigned long chipshift; /* Because they're of the same type */
+	const char *im_name;	 /* inter_module name for cmdset_setup */
+	struct flchip chips[0];  /* per-chip data structure for each chip */
+};
+
+/*
+ * Returns the command address according to the given geometry.
+ */
+static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int type)
+{
+	return (cmd_ofs * type) * interleave;
+}
+
+/*
+ * Transforms the CFI command for the given geometry (bus width & interleave).
+ * It looks too long to be inline, but in the common case it should almost all
+ * get optimised away. 
+ */
+static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cfi_private *cfi)
+{
+	map_word val = { {0} };
+	int wordwidth, words_per_bus, chip_mode, chips_per_word;
+	unsigned long onecmd;
+	int i;
+
+	/* We do it this way to give the compiler a fighting chance 
+	   of optimising away all the crap for 'bankwidth' larger than
+	   an unsigned long, in the common case where that support is
+	   disabled */
+	if (map_bankwidth_is_large(map)) {
+		wordwidth = sizeof(unsigned long);
+		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+	} else {
+		wordwidth = map_bankwidth(map);
+		words_per_bus = 1;
+	}
+	
+	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+	/* First, determine what the bit-pattern should be for a single
+	   device, according to chip mode and endianness... */
+	switch (chip_mode) {
+	default: BUG();
+	case 1:
+		onecmd = cmd;
+		break;
+	case 2:
+		onecmd = cpu_to_cfi16(cmd);
+		break;
+	case 4:
+		onecmd = cpu_to_cfi32(cmd);
+		break;
+	}
+
+	/* Now replicate it across the size of an unsigned long, or 
+	   just to the bus width as appropriate */
+	switch (chips_per_word) {
+	default: BUG();
+#if BITS_PER_LONG >= 64
+	case 8:
+		onecmd |= (onecmd << (chip_mode * 32));
+#endif
+	case 4:
+		onecmd |= (onecmd << (chip_mode * 16));
+	case 2:
+		onecmd |= (onecmd << (chip_mode * 8));
+	case 1:
+		;
+	}
+
+	/* And finally, for the multi-word case, replicate it 
+	   in all words in the structure */
+	for (i=0; i < words_per_bus; i++) {
+		val.x[i] = onecmd;
+	}
+
+	return val;
+}
+#define CMD(x)  cfi_build_cmd((x), map, cfi)
+
+/*
+ * Sends a CFI command to a bank of flash for the given geometry.
+ *
+ * Returns the offset in flash where the command was written.
+ * If prev_val is non-null, it will be set to the value at the command address,
+ * before the command was written.
+ */
+static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+				struct map_info *map, struct cfi_private *cfi,
+				int type, map_word *prev_val)
+{
+	map_word val;
+	uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, cfi_interleave(cfi), type);
+
+	val = cfi_build_cmd(cmd, map, cfi);
+
+	if (prev_val)
+		*prev_val = map_read(map, addr);
+
+	map_write(map, val, addr);
+
+	return addr - base;
+}
+
+static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
+{
+	map_word val = map_read(map, addr);
+
+	if (map_bankwidth_is_1(map)) {
+		return val.x[0];
+	} else if (map_bankwidth_is_2(map)) {
+		return cfi16_to_cpu(val.x[0]);
+	} else {
+		/* No point in a 64-bit byteswap since that would just be
+		   swapping the responses from different chips, and we are
+		   only interested in one chip (a representative sample) */
+		return cfi32_to_cpu(val.x[0]);
+	}
+}
+
+static inline void cfi_udelay(int us)
+{
+	if (us >= 1000) {
+		msleep((us+999)/1000);
+	} else {
+		udelay(us);
+		cond_resched();
+	}
+}
+
+static inline void cfi_spin_lock(spinlock_t *mutex)
+{
+	spin_lock_bh(mutex);
+}
+
+static inline void cfi_spin_unlock(spinlock_t *mutex)
+{
+	spin_unlock_bh(mutex);
+}
+
+struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
+			     const char* name);
+struct cfi_fixup {
+	uint16_t mfr;
+	uint16_t id;
+	void (*fixup)(struct mtd_info *mtd, void* param);
+	void* param;
+};
+
+#define CFI_MFR_ANY 0xffff
+#define CFI_ID_ANY  0xffff
+
+#define CFI_MFR_AMD 0x0001
+#define CFI_MFR_ST  0x0020 	/* STMicroelectronics */
+
+void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
+
+typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip,
+			      unsigned long adr, int len, void *thunk);
+
+int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
+	loff_t ofs, size_t len, void *thunk);
+
+
+#endif /* __MTD_CFI_H__ */
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
new file mode 100644
index 000000000000..25724f7d3867
--- /dev/null
+++ b/include/linux/mtd/cfi_endian.h
@@ -0,0 +1,57 @@
+/*
+ * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $
+ *
+ */
+
+#include <asm/byteorder.h>
+
+#ifndef CONFIG_MTD_CFI_ADV_OPTIONS
+
+#define CFI_HOST_ENDIAN
+
+#else
+
+#ifdef CONFIG_MTD_CFI_NOSWAP
+#define CFI_HOST_ENDIAN
+#endif
+
+#ifdef CONFIG_MTD_CFI_LE_BYTE_SWAP
+#define CFI_LITTLE_ENDIAN
+#endif
+
+#ifdef CONFIG_MTD_CFI_BE_BYTE_SWAP
+#define CFI_BIG_ENDIAN
+#endif
+
+#endif
+
+#if defined(CFI_LITTLE_ENDIAN)
+#define cpu_to_cfi8(x) (x)
+#define cfi8_to_cpu(x) (x)
+#define cpu_to_cfi16(x) cpu_to_le16(x)
+#define cpu_to_cfi32(x) cpu_to_le32(x)
+#define cpu_to_cfi64(x) cpu_to_le64(x)
+#define cfi16_to_cpu(x) le16_to_cpu(x)
+#define cfi32_to_cpu(x) le32_to_cpu(x)
+#define cfi64_to_cpu(x) le64_to_cpu(x)
+#elif defined (CFI_BIG_ENDIAN)
+#define cpu_to_cfi8(x) (x)
+#define cfi8_to_cpu(x) (x)
+#define cpu_to_cfi16(x) cpu_to_be16(x)
+#define cpu_to_cfi32(x) cpu_to_be32(x)
+#define cpu_to_cfi64(x) cpu_to_be64(x)
+#define cfi16_to_cpu(x) be16_to_cpu(x)
+#define cfi32_to_cpu(x) be32_to_cpu(x)
+#define cfi64_to_cpu(x) be64_to_cpu(x)
+#elif defined (CFI_HOST_ENDIAN)
+#define cpu_to_cfi8(x) (x)
+#define cfi8_to_cpu(x) (x)
+#define cpu_to_cfi16(x) (x)
+#define cpu_to_cfi32(x) (x)
+#define cpu_to_cfi64(x) (x)
+#define cfi16_to_cpu(x) (x)
+#define cfi32_to_cpu(x) (x)
+#define cfi64_to_cpu(x) (x)
+#else
+#error No CFI endianness defined
+#endif
diff --git a/include/linux/mtd/compatmac.h b/include/linux/mtd/compatmac.h
new file mode 100644
index 000000000000..7d1300d9bd51
--- /dev/null
+++ b/include/linux/mtd/compatmac.h
@@ -0,0 +1,10 @@
+
+#ifndef __LINUX_MTD_COMPATMAC_H__
+#define __LINUX_MTD_COMPATMAC_H__
+
+/* Nothing to see here. We write 2.5-compatible code and this
+   file makes it all OK in older kernels, but it's empty in _current_
+   kernels. Include guard just to make GCC ignore it in future inclusions
+   anyway... */
+
+#endif /* __LINUX_MTD_COMPATMAC_H__ */
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
new file mode 100644
index 000000000000..ed8dc6755219
--- /dev/null
+++ b/include/linux/mtd/concat.h
@@ -0,0 +1,23 @@
+/*
+ * MTD device concatenation layer definitions
+ *
+ * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * This code is GPL
+ *
+ * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $
+ */
+
+#ifndef MTD_CONCAT_H
+#define MTD_CONCAT_H
+
+
+struct mtd_info *mtd_concat_create(
+    struct mtd_info *subdev[],  /* subdevices to concatenate */
+    int num_devs,               /* number of subdevices      */
+    char *name);                /* name for the new device   */
+
+void mtd_concat_destroy(struct mtd_info *mtd);
+
+#endif
+
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
new file mode 100644
index 000000000000..953e64fb8ac5
--- /dev/null
+++ b/include/linux/mtd/doc2000.h
@@ -0,0 +1,195 @@
+/* 
+ * Linux driver for Disk-On-Chip devices
+ *
+ * Copyright (C) 1999 Machine Vision Holdings, Inc.   
+ * Copyright (C) 2001-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright (C) 2002-2003 SnapGear Inc
+ *
+ * $Id: doc2000.h,v 1.24 2005/01/05 12:40:38 dwmw2 Exp $ 
+ *
+ * Released under GPL
+ */
+
+#ifndef __MTD_DOC2000_H__
+#define __MTD_DOC2000_H__
+
+#include <linux/mtd/mtd.h>
+#include <asm/semaphore.h>
+
+#define DoC_Sig1 0
+#define DoC_Sig2 1
+
+#define DoC_ChipID		0x1000
+#define DoC_DOCStatus		0x1001
+#define DoC_DOCControl		0x1002
+#define DoC_FloorSelect		0x1003
+#define DoC_CDSNControl		0x1004
+#define DoC_CDSNDeviceSelect 	0x1005
+#define DoC_ECCConf 		0x1006
+#define DoC_2k_ECCStatus	0x1007
+
+#define DoC_CDSNSlowIO		0x100d
+#define DoC_ECCSyndrome0	0x1010
+#define DoC_ECCSyndrome1	0x1011
+#define DoC_ECCSyndrome2	0x1012
+#define DoC_ECCSyndrome3	0x1013
+#define DoC_ECCSyndrome4	0x1014
+#define DoC_ECCSyndrome5	0x1015
+#define DoC_AliasResolution 	0x101b
+#define DoC_ConfigInput		0x101c
+#define DoC_ReadPipeInit 	0x101d
+#define DoC_WritePipeTerm 	0x101e
+#define DoC_LastDataRead 	0x101f
+#define DoC_NOP 		0x1020
+
+#define DoC_Mil_CDSN_IO 	0x0800
+#define DoC_2k_CDSN_IO 		0x1800
+
+#define DoC_Mplus_NOP			0x1002
+#define DoC_Mplus_AliasResolution	0x1004
+#define DoC_Mplus_DOCControl		0x1006
+#define DoC_Mplus_AccessStatus		0x1008
+#define DoC_Mplus_DeviceSelect		0x1008
+#define DoC_Mplus_Configuration		0x100a
+#define DoC_Mplus_OutputControl		0x100c
+#define DoC_Mplus_FlashControl		0x1020
+#define DoC_Mplus_FlashSelect 		0x1022
+#define DoC_Mplus_FlashCmd		0x1024
+#define DoC_Mplus_FlashAddress		0x1026
+#define DoC_Mplus_FlashData0		0x1028
+#define DoC_Mplus_FlashData1		0x1029
+#define DoC_Mplus_ReadPipeInit		0x102a
+#define DoC_Mplus_LastDataRead		0x102c
+#define DoC_Mplus_LastDataRead1		0x102d
+#define DoC_Mplus_WritePipeTerm 	0x102e
+#define DoC_Mplus_ECCSyndrome0		0x1040
+#define DoC_Mplus_ECCSyndrome1		0x1041
+#define DoC_Mplus_ECCSyndrome2		0x1042
+#define DoC_Mplus_ECCSyndrome3		0x1043
+#define DoC_Mplus_ECCSyndrome4		0x1044
+#define DoC_Mplus_ECCSyndrome5		0x1045
+#define DoC_Mplus_ECCConf 		0x1046
+#define DoC_Mplus_Toggle		0x1046
+#define DoC_Mplus_DownloadStatus	0x1074
+#define DoC_Mplus_CtrlConfirm		0x1076
+#define DoC_Mplus_Power			0x1fff
+
+/* How to access the device? 
+ * On ARM, it'll be mmap'd directly with 32-bit wide accesses. 
+ * On PPC, it's mmap'd and 16-bit wide.
+ * Others use readb/writeb 
+ */
+#if defined(__arm__)
+#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
+#define WriteDOC_(d, adr, reg)  do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x8000
+#elif defined(__ppc__)
+#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
+#define WriteDOC_(d, adr, reg)  do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x4000
+#else
+#define ReadDOC_(adr, reg)      readb((void __iomem *)(adr) + (reg))
+#define WriteDOC_(d, adr, reg)  writeb(d, (void __iomem *)(adr) + (reg))
+#define DOC_IOREMAP_LEN 0x2000
+
+#endif
+
+#if defined(__i386__) || defined(__x86_64__)
+#define USE_MEMCPY
+#endif
+
+/* These are provided to directly use the DoC_xxx defines */
+#define ReadDOC(adr, reg)      ReadDOC_(adr,DoC_##reg)
+#define WriteDOC(d, adr, reg)  WriteDOC_(d,adr,DoC_##reg)
+
+#define DOC_MODE_RESET 		0
+#define DOC_MODE_NORMAL 	1
+#define DOC_MODE_RESERVED1 	2
+#define DOC_MODE_RESERVED2 	3
+
+#define DOC_MODE_CLR_ERR 	0x80
+#define	DOC_MODE_RST_LAT	0x10
+#define	DOC_MODE_BDECT		0x08
+#define DOC_MODE_MDWREN 	0x04
+
+#define DOC_ChipID_Doc2k 	0x20
+#define DOC_ChipID_Doc2kTSOP 	0x21	/* internal number for MTD */
+#define DOC_ChipID_DocMil 	0x30
+#define DOC_ChipID_DocMilPlus32	0x40
+#define DOC_ChipID_DocMilPlus16	0x41
+
+#define CDSN_CTRL_FR_B 		0x80
+#define CDSN_CTRL_FR_B0		0x40
+#define CDSN_CTRL_FR_B1		0x80
+
+#define CDSN_CTRL_ECC_IO 	0x20
+#define CDSN_CTRL_FLASH_IO 	0x10
+#define CDSN_CTRL_WP 		0x08
+#define CDSN_CTRL_ALE 		0x04
+#define CDSN_CTRL_CLE 		0x02
+#define CDSN_CTRL_CE 		0x01
+
+#define DOC_ECC_RESET 		0
+#define DOC_ECC_ERROR 		0x80
+#define DOC_ECC_RW 		0x20
+#define DOC_ECC__EN 		0x08
+#define DOC_TOGGLE_BIT 		0x04
+#define DOC_ECC_RESV 		0x02
+#define DOC_ECC_IGNORE		0x01
+
+#define DOC_FLASH_CE		0x80
+#define DOC_FLASH_WP		0x40
+#define DOC_FLASH_BANK		0x02
+
+/* We have to also set the reserved bit 1 for enable */
+#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
+#define DOC_ECC_DIS (DOC_ECC_RESV)
+
+struct Nand {
+	char floor, chip;
+	unsigned long curadr;
+	unsigned char curmode;
+	/* Also some erase/write/pipeline info when we get that far */
+};
+
+#define MAX_FLOORS 4
+#define MAX_CHIPS 4
+
+#define MAX_FLOORS_MIL 1
+#define MAX_CHIPS_MIL 1
+
+#define MAX_FLOORS_MPLUS 2
+#define MAX_CHIPS_MPLUS 1
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+struct DiskOnChip {
+	unsigned long physadr;
+	void __iomem *virtadr;
+	unsigned long totlen;
+	unsigned char ChipID; /* Type of DiskOnChip */
+	int ioreg;
+	
+	unsigned long mfr; /* Flash IDs - only one type of flash per device */
+	unsigned long id;
+	int chipshift;
+	char page256;
+	char pageadrlen;
+	char interleave; /* Internal interleaving - Millennium Plus style */
+	unsigned long erasesize;
+	
+	int curfloor;
+	int curchip;
+	
+	int numchips;
+	struct Nand *chips;
+	struct mtd_info *nextdoc;
+	struct semaphore lock;
+};
+
+int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
+
+#endif /* __MTD_DOC2000_H__ */
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
new file mode 100644
index 000000000000..c66ba812bf90
--- /dev/null
+++ b/include/linux/mtd/flashchip.h
@@ -0,0 +1,89 @@
+
+/* 
+ * struct flchip definition
+ * 
+ * Contains information about the location and state of a given flash device 
+ *
+ * (C) 2000 Red Hat. GPLd.
+ *
+ * $Id: flashchip.h,v 1.15 2004/11/05 22:41:06 nico Exp $
+ *
+ */
+
+#ifndef __MTD_FLASHCHIP_H__
+#define __MTD_FLASHCHIP_H__
+
+/* For spinlocks. sched.h includes spinlock.h from whichever directory it
+ * happens to be in - so we don't have to care whether we're on 2.2, which
+ * has asm/spinlock.h, or 2.4, which has linux/spinlock.h 
+ */
+#include <linux/sched.h>
+
+typedef enum { 
+	FL_READY,
+	FL_STATUS,
+	FL_CFI_QUERY,
+	FL_JEDEC_QUERY,
+	FL_ERASING,
+	FL_ERASE_SUSPENDING,
+	FL_ERASE_SUSPENDED,
+	FL_WRITING,
+	FL_WRITING_TO_BUFFER,
+	FL_WRITE_SUSPENDING,
+	FL_WRITE_SUSPENDED,
+	FL_PM_SUSPENDED,
+	FL_SYNCING,
+	FL_UNLOADING,
+	FL_LOCKING,
+	FL_UNLOCKING,
+	FL_POINT,
+	FL_XIP_WHILE_ERASING,
+	FL_XIP_WHILE_WRITING,
+	FL_UNKNOWN
+} flstate_t;
+
+
+
+/* NOTE: confusingly, this can be used to refer to more than one chip at a time, 
+   if they're interleaved.  This can even refer to individual partitions on
+   the same physical chip when present. */
+
+struct flchip {
+	unsigned long start; /* Offset within the map */
+	//	unsigned long len;
+	/* We omit len for now, because when we group them together
+	   we insist that they're all of the same size, and the chip size
+	   is held in the next level up. If we get more versatile later,
+	   it'll make it a damn sight harder to find which chip we want from
+	   a given offset, and we'll want to add the per-chip length field
+	   back in.
+	*/
+	int ref_point_counter;
+	flstate_t state;
+	flstate_t oldstate;
+
+	int write_suspended:1;
+	int erase_suspended:1;
+	unsigned long in_progress_block_addr;
+
+	spinlock_t *mutex;
+	spinlock_t _spinlock; /* We do it like this because sometimes they'll be shared. */
+	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip
+			     to be ready */
+	int word_write_time;
+	int buffer_write_time;
+	int erase_time;
+
+	void *priv;
+};
+
+/* This is used to handle contention on write/erase operations
+   between partitions of the same physical chip. */
+struct flchip_shared {
+	spinlock_t lock;
+	struct flchip *writing;
+	struct flchip *erasing;
+};
+
+
+#endif /* __MTD_FLASHCHIP_H__ */
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
new file mode 100644
index 000000000000..3678459b4535
--- /dev/null
+++ b/include/linux/mtd/ftl.h
@@ -0,0 +1,76 @@
+/*
+ * $Id: ftl.h,v 1.6 2003/01/24 13:20:04 dwmw2 Exp $
+ * 
+ * Derived from (and probably identical to):
+ * ftl.h 1.7 1999/10/25 20:23:17
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License. 
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_FTL_H
+#define _LINUX_FTL_H
+
+typedef struct erase_unit_header_t {
+    u_int8_t	LinkTargetTuple[5];
+    u_int8_t	DataOrgTuple[10];
+    u_int8_t	NumTransferUnits;
+    u_int32_t	EraseCount;
+    u_int16_t	LogicalEUN;
+    u_int8_t	BlockSize;
+    u_int8_t	EraseUnitSize;
+    u_int16_t	FirstPhysicalEUN;
+    u_int16_t	NumEraseUnits;
+    u_int32_t	FormattedSize;
+    u_int32_t	FirstVMAddress;
+    u_int16_t	NumVMPages;
+    u_int8_t	Flags;
+    u_int8_t	Code;
+    u_int32_t	SerialNumber;
+    u_int32_t	AltEUHOffset;
+    u_int32_t	BAMOffset;
+    u_int8_t	Reserved[12];
+    u_int8_t	EndTuple[2];
+} erase_unit_header_t;
+
+/* Flags in erase_unit_header_t */
+#define HIDDEN_AREA		0x01
+#define REVERSE_POLARITY	0x02
+#define DOUBLE_BAI		0x04
+
+/* Definitions for block allocation information */
+
+#define BLOCK_FREE(b)		((b) == 0xffffffff)
+#define BLOCK_DELETED(b)	(((b) == 0) || ((b) == 0xfffffffe))
+
+#define BLOCK_TYPE(b)		((b) & 0x7f)
+#define BLOCK_ADDRESS(b)	((b) & ~0x7f)
+#define BLOCK_NUMBER(b)		((b) >> 9)
+#define BLOCK_CONTROL		0x30
+#define BLOCK_DATA		0x40
+#define BLOCK_REPLACEMENT	0x60
+#define BLOCK_BAD		0x70
+
+#endif /* _LINUX_FTL_H */
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
new file mode 100644
index 000000000000..3d7bdec14f97
--- /dev/null
+++ b/include/linux/mtd/gen_probe.h
@@ -0,0 +1,23 @@
+/*
+ * (C) 2001, 2001 Red Hat, Inc.
+ * GPL'd
+ * $Id: gen_probe.h,v 1.3 2004/10/20 22:10:33 dwmw2 Exp $
+ */
+
+#ifndef __LINUX_MTD_GEN_PROBE_H__
+#define __LINUX_MTD_GEN_PROBE_H__
+
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h> 
+#include <linux/mtd/cfi.h>
+#include <linux/bitops.h>
+
+struct chip_probe {
+	char *name;
+	int (*probe_chip)(struct map_info *map, __u32 base,
+			  unsigned long *chip_map, struct cfi_private *cfi);
+};
+
+struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp);
+
+#endif /* __LINUX_MTD_GEN_PROBE_H__ */
diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h
new file mode 100644
index 000000000000..9aa5b4f02666
--- /dev/null
+++ b/include/linux/mtd/iflash.h
@@ -0,0 +1,98 @@
+/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */
+
+#ifndef __MTD_IFLASH_H__
+#define __MTD_IFLASH_H__
+
+/* Extended CIS registers for Series 2 and 2+ cards */
+/* The registers are all offsets from 0x4000 */
+#define CISREG_CSR		0x0100
+#define CISREG_WP		0x0104
+#define CISREG_RDYBSY		0x0140
+
+/* Extended CIS registers for Series 2 cards */
+#define CISREG_SLEEP		0x0118
+#define CISREG_RDY_MASK		0x0120
+#define CISREG_RDY_STATUS	0x0130
+
+/* Extended CIS registers for Series 2+ cards */
+#define CISREG_VCR		0x010c
+
+/* Card Status Register */
+#define CSR_SRESET		0x20	/* Soft reset */
+#define CSR_CMWP		0x10	/* Common memory write protect */
+#define CSR_PWRDOWN		0x08	/* Power down status */
+#define CSR_CISWP		0x04	/* Common memory CIS WP */
+#define CSR_WP			0x02	/* Mechanical write protect */
+#define CSR_READY		0x01	/* Ready/busy status */
+
+/* Write Protection Register */
+#define WP_BLKEN		0x04	/* Enable block locking */
+#define WP_CMWP			0x02	/* Common memory write protect */
+#define WP_CISWP		0x01	/* Common memory CIS WP */
+
+/* Voltage Control Register */
+#define VCR_VCC_LEVEL		0x80	/* 0 = 5V, 1 = 3.3V */
+#define VCR_VPP_VALID		0x02	/* Vpp Valid */
+#define VCR_VPP_GEN		0x01	/* Integrated Vpp generator */
+
+/* Ready/Busy Mode Register */
+#define RDYBSY_RACK		0x02	/* Ready acknowledge */
+#define RDYBSY_MODE		0x01	/* 1 = high performance */
+
+#define LOW(x) ((x) & 0xff)
+
+/* 28F008SA-Compatible Command Set */
+#define IF_READ_ARRAY		0xffff
+#define IF_INTEL_ID		0x9090
+#define IF_READ_CSR		0x7070
+#define IF_CLEAR_CSR		0x5050
+#define IF_WRITE		0x4040
+#define IF_BLOCK_ERASE		0x2020
+#define IF_ERASE_SUSPEND	0xb0b0
+#define IF_CONFIRM		0xd0d0
+
+/* 28F016SA Performance Enhancement Commands */
+#define IF_READ_PAGE		0x7575
+#define IF_PAGE_SWAP		0x7272
+#define IF_SINGLE_LOAD		0x7474
+#define IF_SEQ_LOAD		0xe0e0
+#define IF_PAGE_WRITE		0x0c0c
+#define IF_RDY_MODE		0x9696
+#define IF_RDY_LEVEL		0x0101
+#define IF_RDY_PULSE_WRITE	0x0202
+#define IF_RDY_PULSE_ERASE	0x0303
+#define IF_RDY_DISABLE		0x0404
+#define IF_LOCK_BLOCK		0x7777
+#define IF_UPLOAD_STATUS	0x9797
+#define IF_READ_ESR		0x7171
+#define IF_ERASE_UNLOCKED	0xa7a7
+#define IF_SLEEP		0xf0f0
+#define IF_ABORT		0x8080
+#define IF_UPLOAD_DEVINFO	0x9999
+
+/* Definitions for Compatible Status Register */
+#define CSR_WR_READY		0x8080	/* Write state machine status */
+#define CSR_ERA_SUSPEND		0x4040	/* Erase suspend status */
+#define CSR_ERA_ERR		0x2020	/* Erase status */
+#define CSR_WR_ERR		0x1010	/* Data write status */
+#define CSR_VPP_LOW		0x0808	/* Vpp status */
+
+/* Definitions for Global Status Register */
+#define GSR_WR_READY		0x8080	/* Write state machine status */
+#define GSR_OP_SUSPEND		0x4040	/* Operation suspend status */
+#define GSR_OP_ERR		0x2020	/* Device operation status */
+#define GSR_SLEEP		0x1010	/* Device sleep status */
+#define GSR_QUEUE_FULL		0x0808	/* Queue status */
+#define GSR_PAGE_AVAIL		0x0404	/* Page buffer available status */
+#define GSR_PAGE_READY		0x0202	/* Page buffer status */
+#define GSR_PAGE_SELECT		0x0101	/* Page buffer select status */
+
+/* Definitions for Block Status Register */
+#define BSR_READY		0x8080	/* Block status */
+#define BSR_UNLOCK		0x4040	/* Block lock status */
+#define BSR_FAILED		0x2020	/* Block operation status */
+#define BSR_ABORTED		0x1010	/* Operation abort status */
+#define BSR_QUEUE_FULL		0x0808	/* Queue status */
+#define BSR_VPP_LOW		0x0404	/* Vpp status */
+
+#endif /* __MTD_IFLASH_H__ */
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
new file mode 100644
index 000000000000..b52c8cbd235c
--- /dev/null
+++ b/include/linux/mtd/inftl.h
@@ -0,0 +1,57 @@
+/*
+ *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	$Id: inftl.h,v 1.6 2004/06/30 14:49:00 dbrown Exp $
+ */
+
+#ifndef __MTD_INFTL_H__
+#define __MTD_INFTL_H__
+
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include nftl-user.h instead?
+#endif
+
+#include <linux/mtd/blktrans.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nftl.h>
+
+#include <mtd/inftl-user.h>
+
+#ifndef INFTL_MAJOR
+#define INFTL_MAJOR 94
+#endif
+#define INFTL_PARTN_BITS 4
+
+#ifdef __KERNEL__
+
+struct INFTLrecord {
+	struct mtd_blktrans_dev mbd;
+	__u16 MediaUnit;
+	__u32 EraseSize;
+	struct INFTLMediaHeader MediaHdr;
+	int usecount;
+	unsigned char heads;
+	unsigned char sectors;
+	unsigned short cylinders;
+	__u16 numvunits;
+	__u16 firstEUN;
+	__u16 lastEUN;
+	__u16 numfreeEUNs;
+	__u16 LastFreeEUN; 		/* To speed up finding a free EUN */
+	int head,sect,cyl;
+	__u16 *PUtable;	 		/* Physical Unit Table  */
+	__u16 *VUtable; 		/* Virtual Unit Table */
+        unsigned int nb_blocks;		/* number of physical blocks */
+        unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
+        struct erase_info instr;
+        struct nand_oobinfo oobinfo;
+};
+
+int INFTL_mount(struct INFTLrecord *s);
+int INFTL_formatblock(struct INFTLrecord *s, int block);
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_INFTL_H__ */
diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
new file mode 100644
index 000000000000..2ba0f700ddbc
--- /dev/null
+++ b/include/linux/mtd/jedec.h
@@ -0,0 +1,66 @@
+
+/* JEDEC Flash Interface.
+ * This is an older type of interface for self programming flash. It is 
+ * commonly use in older AMD chips and is obsolete compared with CFI.
+ * It is called JEDEC because the JEDEC association distributes the ID codes
+ * for the chips.
+ *
+ * See the AMD flash databook for information on how to operate the interface.
+ *
+ * $Id: jedec.h,v 1.3 2003/05/21 11:51:01 dwmw2 Exp $
+ */
+
+#ifndef __LINUX_MTD_JEDEC_H__
+#define __LINUX_MTD_JEDEC_H__
+
+#include <linux/types.h>
+
+#define MAX_JEDEC_CHIPS 16
+
+// Listing of all supported chips and their information
+struct JEDECTable
+{
+   __u16 jedec;
+   char *name;
+   unsigned long size;
+   unsigned long sectorsize;
+   __u32 capabilities;
+};
+
+// JEDEC being 0 is the end of the chip array
+struct jedec_flash_chip
+{
+   __u16 jedec;
+   unsigned long size;
+   unsigned long sectorsize;
+   
+   // *(__u8*)(base + (adder << addrshift)) = data << datashift
+   // Address size = size << addrshift
+   unsigned long base;           // Byte 0 of the flash, will be unaligned
+   unsigned int datashift;       // Useful for 32bit/16bit accesses
+   unsigned int addrshift;
+   unsigned long offset;         // linerized start. base==offset for unbanked, uninterleaved flash
+   
+   __u32 capabilities;
+   
+   // These markers are filled in by the flash_chip_scan function
+   unsigned long start;
+   unsigned long length;
+};
+
+struct jedec_private
+{
+   unsigned long size;         // Total size of all the devices
+   
+   /* Bank handling. If sum(bank_fill) == size then this is linear flash.
+      Otherwise the mapping has holes in it. bank_fill may be used to
+      find the holes, but in the common symetric case 
+      bank_fill[0] == bank_fill[*], thus addresses may be computed 
+      mathmatically. bank_fill must be powers of two */
+   unsigned is_banked;
+   unsigned long bank_fill[MAX_JEDEC_CHIPS];
+   
+   struct jedec_flash_chip chips[MAX_JEDEC_CHIPS];  
+};
+
+#endif
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
new file mode 100644
index 000000000000..f0268b99c900
--- /dev/null
+++ b/include/linux/mtd/map.h
@@ -0,0 +1,412 @@
+
+/* Overhauled routines for dealing with different mmap regions of flash */
+/* $Id: map.h,v 1.46 2005/01/05 17:09:44 dwmw2 Exp $ */
+
+#ifndef __LINUX_MTD_MAP_H__
+#define __LINUX_MTD_MAP_H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/mtd/compatmac.h>
+#include <asm/unaligned.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/bug.h>
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+#define map_bankwidth(map) 1
+#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1)
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (1)
+#define MAX_MAP_BANKWIDTH 1
+#else
+#define map_bankwidth_is_1(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+# else
+#  define map_bankwidth(map) 2
+#  define map_bankwidth_is_large(map) (0)
+#  define map_words(map) (1)
+# endif
+#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 2
+#else
+#define map_bankwidth_is_2(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+# else
+#  define map_bankwidth(map) 4
+#  define map_bankwidth_is_large(map) (0)
+#  define map_words(map) (1)
+# endif
+#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 4
+#else
+#define map_bankwidth_is_4(map) (0)
+#endif
+
+/* ensure we never evaluate anything shorted than an unsigned long
+ * to zero, and ensure we'll never miss the end of an comparison (bjd) */
+
+#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long))
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  if BITS_PER_LONG < 64
+#   undef map_bankwidth_is_large
+#   define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#   undef map_words
+#   define map_words(map) map_calc_words(map)
+#  endif
+# else
+#  define map_bankwidth(map) 8
+#  define map_bankwidth_is_large(map) (BITS_PER_LONG < 64)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 8
+#else
+#define map_bankwidth_is_8(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  undef map_bankwidth_is_large
+#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#  undef map_words
+#  define map_words(map) map_calc_words(map)
+# else
+#  define map_bankwidth(map) 16
+#  define map_bankwidth_is_large(map) (1)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 16
+#else
+#define map_bankwidth_is_16(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  undef map_bankwidth_is_large
+#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#  undef map_words
+#  define map_words(map) map_calc_words(map)
+# else
+#  define map_bankwidth(map) 32
+#  define map_bankwidth_is_large(map) (1)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 32
+#else
+#define map_bankwidth_is_32(map) (0)
+#endif
+
+#ifndef map_bankwidth
+#error "No bus width supported. What's the point?"
+#endif
+
+static inline int map_bankwidth_supported(int w)
+{
+	switch (w) {
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+	case 1:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+	case 2:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+	case 4:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+	case 8:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+	case 16:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+	case 32:
+#endif
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG )
+
+typedef union {
+	unsigned long x[MAX_MAP_LONGS];
+} map_word;
+
+/* The map stuff is very simple. You fill in your struct map_info with
+   a handful of routines for accessing the device, making sure they handle
+   paging etc. correctly if your device needs it. Then you pass it off
+   to a chip probe routine -- either JEDEC or CFI probe or both -- via
+   do_map_probe(). If a chip is recognised, the probe code will invoke the
+   appropriate chip driver (if present) and return a struct mtd_info.
+   At which point, you fill in the mtd->module with your own module 
+   address, and register it with the MTD core code. Or you could partition
+   it and register the partitions instead, or keep it for your own private
+   use; whatever.
+   
+   The mtd->priv field will point to the struct map_info, and any further
+   private data required by the chip driver is linked from the 
+   mtd->priv->fldrv_priv field. This allows the map driver to get at 
+   the destructor function map->fldrv_destroy() when it's tired
+   of living.
+*/
+
+struct map_info {
+	char *name;
+	unsigned long size;
+	unsigned long phys;
+#define NO_XIP (-1UL)
+
+	void __iomem *virt;
+	void *cached;
+
+	int bankwidth; /* in octets. This isn't necessarily the width
+		       of actual bus cycles -- it's the repeat interval
+		      in bytes, before you are talking to the first chip again.
+		      */
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+	map_word (*read)(struct map_info *, unsigned long);
+	void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t);
+
+	void (*write)(struct map_info *, const map_word, unsigned long);
+	void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t);
+
+	/* We can perhaps put in 'point' and 'unpoint' methods, if we really
+	   want to enable XIP for non-linear mappings. Not yet though. */
+#endif
+	/* It's possible for the map driver to use cached memory in its
+	   copy_from implementation (and _only_ with copy_from).  However,
+	   when the chip driver knows some flash area has changed contents,
+	   it will signal it to the map driver through this routine to let
+	   the map driver invalidate the corresponding cache as needed.
+	   If there is no cache to care about this can be set to NULL. */
+	void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
+
+	/* set_vpp() must handle being reentered -- enable, enable, disable 
+	   must leave it enabled. */
+	void (*set_vpp)(struct map_info *, int);
+
+	unsigned long map_priv_1;
+	unsigned long map_priv_2;
+	void *fldrv_priv;
+	struct mtd_chip_driver *fldrv;
+};
+
+struct mtd_chip_driver {
+	struct mtd_info *(*probe)(struct map_info *map);
+	void (*destroy)(struct mtd_info *);
+	struct module *module;
+	char *name;
+	struct list_head list;
+};
+
+void register_mtd_chip_driver(struct mtd_chip_driver *);
+void unregister_mtd_chip_driver(struct mtd_chip_driver *);
+
+struct mtd_info *do_map_probe(const char *name, struct map_info *map);
+void map_destroy(struct mtd_info *mtd);
+
+#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0)
+#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0)
+
+#define INVALIDATE_CACHED_RANGE(map, from, size) \
+	do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
+
+
+static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2)
+{
+	int i;
+	for (i=0; i<map_words(map); i++) {
+		if (val1.x[i] != val2.x[i])
+			return 0;
+	}
+	return 1;
+}
+
+static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] & val2.x[i];
+	}
+	return r;
+}
+
+static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] | val2.x[i];
+	}
+	return r;
+}
+#define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b))
+
+static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
+{
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		if (val1.x[i] & val2.x[i])
+			return 1;
+	}
+	return 0;
+}
+
+static inline map_word map_word_load(struct map_info *map, const void *ptr)
+{
+	map_word r;
+
+	if (map_bankwidth_is_1(map))
+		r.x[0] = *(unsigned char *)ptr;
+	else if (map_bankwidth_is_2(map))
+		r.x[0] = get_unaligned((uint16_t *)ptr);
+	else if (map_bankwidth_is_4(map))
+		r.x[0] = get_unaligned((uint32_t *)ptr);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		r.x[0] = get_unaligned((uint64_t *)ptr);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy(r.x, ptr, map->bankwidth);
+
+	return r;
+}
+
+static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len)
+{
+	int i;
+
+	if (map_bankwidth_is_large(map)) {
+		char *dest = (char *)&orig;
+		memcpy(dest+start, buf, len);
+	} else {
+		for (i=start; i < start+len; i++) {
+			int bitpos;
+#ifdef __LITTLE_ENDIAN
+			bitpos = i*8;
+#else /* __BIG_ENDIAN */
+			bitpos = (map_bankwidth(map)-1-i)*8;
+#endif
+			orig.x[0] &= ~(0xff << bitpos);
+			orig.x[0] |= buf[i-start] << bitpos;
+		}
+	}
+	return orig;
+}
+
+static inline map_word map_word_ff(struct map_info *map)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = ~0UL;
+	}
+	return r;
+}
+static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
+{
+	map_word r;
+
+	if (map_bankwidth_is_1(map))
+		r.x[0] = __raw_readb(map->virt + ofs);
+	else if (map_bankwidth_is_2(map))
+		r.x[0] = __raw_readw(map->virt + ofs);
+	else if (map_bankwidth_is_4(map))
+		r.x[0] = __raw_readl(map->virt + ofs);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		r.x[0] = __raw_readq(map->virt + ofs);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy_fromio(r.x, map->virt+ofs, map->bankwidth);
+
+	return r;
+}
+
+static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+{
+	if (map_bankwidth_is_1(map))
+		__raw_writeb(datum.x[0], map->virt + ofs);
+	else if (map_bankwidth_is_2(map))
+		__raw_writew(datum.x[0], map->virt + ofs);
+	else if (map_bankwidth_is_4(map))
+		__raw_writel(datum.x[0], map->virt + ofs);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		__raw_writeq(datum.x[0], map->virt + ofs);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy_toio(map->virt+ofs, datum.x, map->bankwidth);
+	mb();
+}
+
+static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	if (map->cached)
+		memcpy(to, (char *)map->cached + from, len);
+	else
+		memcpy_fromio(to, map->virt + from, len);
+}
+
+static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	memcpy_toio(map->virt + to, from, len);
+}
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+#define map_read(map, ofs) (map)->read(map, ofs)
+#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) (map)->write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len)
+
+extern void simple_map_init(struct map_info *);
+#define map_is_linear(map) (map->phys != NO_XIP)
+
+#else
+#define map_read(map, ofs) inline_map_read(map, ofs)
+#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len)
+
+
+#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth))
+#define map_is_linear(map) (1)
+
+#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */
+
+#endif /* __LINUX_MTD_MAP_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
new file mode 100644
index 000000000000..b3d134392b31
--- /dev/null
+++ b/include/linux/mtd/mtd.h
@@ -0,0 +1,226 @@
+/* 
+ * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
+ *
+ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * Released under GPL
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include mtd-user.h instead?
+#endif
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/uio.h>
+
+#include <linux/mtd/compatmac.h>
+#include <mtd/mtd-abi.h>
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 16
+
+#define MTD_ERASE_PENDING      	0x01
+#define MTD_ERASING		0x02
+#define MTD_ERASE_SUSPEND	0x04
+#define MTD_ERASE_DONE          0x08
+#define MTD_ERASE_FAILED        0x10
+
+/* If the erase fails, fail_addr might indicate exactly which block failed.  If
+   fail_addr = 0xffffffff, the failure was not at the device level or was not
+   specific to any particular block. */
+struct erase_info {
+	struct mtd_info *mtd;
+	u_int32_t addr;
+	u_int32_t len;
+	u_int32_t fail_addr;
+	u_long time;
+	u_long retries;
+	u_int dev;
+	u_int cell;
+	void (*callback) (struct erase_info *self);
+	u_long priv;
+	u_char state;
+	struct erase_info *next;
+};
+
+struct mtd_erase_region_info {
+	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */
+	u_int32_t erasesize;		/* For this region */
+	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+};
+
+struct mtd_info {
+	u_char type;
+	u_int32_t flags;
+	u_int32_t size;	 // Total size of the MTD
+
+	/* "Major" erase size for the device. Naïve users may take this
+	 * to be the only erase size available, or may use the more detailed
+	 * information below if they desire
+	 */
+	u_int32_t erasesize;
+
+	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
+	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t oobavail;  // Number of bytes in OOB area available for fs 
+	u_int32_t ecctype;
+	u_int32_t eccsize;
+	
+
+	// Kernel-only stuff starts here.
+	char *name;
+	int index;
+
+	// oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
+	struct nand_oobinfo oobinfo;
+
+	/* Data for variable erase regions. If numeraseregions is zero,
+	 * it means that the whole device has erasesize as given above. 
+	 */
+	int numeraseregions;
+	struct mtd_erase_region_info *eraseregions; 
+
+	/* This really shouldn't be here. It can go away in 2.5 */
+	u_int32_t bank_size;
+
+	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
+
+	/* This stuff for eXecute-In-Place */
+	int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+
+	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+	void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
+
+
+	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+
+	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	/* 
+	 * Methods to access the protection register area, present in some 
+	 * flash devices. The user data is one time programmable but the
+	 * factory data is read only. 
+	 */
+	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* This function is not yet implemented */
+	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* kvec-based read/write methods. We need these especially for NAND flash,
+	   with its limited number of write cycles per erase.
+	   NB: The 'count' parameter is the number of _vectors_, each of 
+	   which contains an (ofs, len) tuple.
+	*/
+	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
+	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, 
+		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
+	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, 
+		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+
+	/* Sync */
+	void (*sync) (struct mtd_info *mtd);
+
+	/* Chip-supported device locking */
+	int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+	int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+
+	/* Power Management functions */
+	int (*suspend) (struct mtd_info *mtd);
+	void (*resume) (struct mtd_info *mtd);
+
+	/* Bad block management functions */
+	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
+
+	void *priv;
+
+	struct module *owner;
+	int usecount;
+};
+
+
+	/* Kernel-side ioctl definitions */
+
+extern int add_mtd_device(struct mtd_info *mtd);
+extern int del_mtd_device (struct mtd_info *mtd);
+
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+
+extern void put_mtd_device(struct mtd_info *mtd);
+
+
+struct mtd_notifier {
+	void (*add)(struct mtd_info *mtd);
+	void (*remove)(struct mtd_info *mtd);
+	struct list_head list;
+};
+
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+
+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		       unsigned long count, loff_t to, size_t *retlen);
+
+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
+		      unsigned long count, loff_t from, size_t *retlen);
+
+#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
+#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
+#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
+#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
+#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
+#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
+#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
+#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
+#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
+#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
+#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0) 
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+void mtd_erase_callback(struct erase_info *instr);
+#else
+static inline void mtd_erase_callback(struct erase_info *instr)
+{
+	if (instr->callback)
+		instr->callback(instr);
+}
+#endif
+
+/*
+ * Debugging macro and defines
+ */
+#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */
+#define MTD_DEBUG_LEVEL1	(1)	/* Audible */
+#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */
+#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
+
+#ifdef CONFIG_MTD_DEBUG
+#define DEBUG(n, args...)				\
+ 	do {						\
+		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
+			printk(KERN_INFO args);		\
+	} while(0)
+#else /* CONFIG_MTD_DEBUG */
+#define DEBUG(n, args...) do { } while(0)
+
+#endif /* CONFIG_MTD_DEBUG */
+
+#endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
new file mode 100644
index 000000000000..9a19c65abd74
--- /dev/null
+++ b/include/linux/mtd/nand.h
@@ -0,0 +1,469 @@
+/*
+ *  linux/include/linux/mtd/nand.h
+ *
+ *  Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ *                     Steven J. Hill <sjhill@realitydiluted.com>
+ *		       Thomas Gleixner <tglx@linutronix.de>
+ *
+ * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Info:
+ *   Contains standard defines and IDs for NAND flash devices
+ *
+ *  Changelog:
+ *   01-31-2000 DMW     Created
+ *   09-18-2000 SJH     Moved structure out of the Disk-On-Chip drivers
+ *			so it can be used by other NAND flash device
+ *			drivers. I also changed the copyright since none
+ *			of the original contents of this file are specific
+ *			to DoC devices. David can whack me with a baseball
+ *			bat later if I did something naughty.
+ *   10-11-2000 SJH     Added private NAND flash structure for driver
+ *   10-24-2000 SJH     Added prototype for 'nand_scan' function
+ *   10-29-2001 TG	changed nand_chip structure to support 
+ *			hardwarespecific function for accessing control lines
+ *   02-21-2002 TG	added support for different read/write adress and
+ *			ready/busy line access function
+ *   02-26-2002 TG	added chip_delay to nand_chip structure to optimize
+ *			command delay times for different chips
+ *   04-28-2002 TG	OOB config defines moved from nand.c to avoid duplicate
+ *			defines in jffs2/wbuf.c
+ *   08-07-2002 TG	forced bad block location to byte 5 of OOB, even if
+ *			CONFIG_MTD_NAND_ECC_JFFS2 is not set
+ *   08-10-2002 TG	extensions to nand_chip structure to support HW-ECC
+ *
+ *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting 
+ *			internal / fs-driver buffer
+ *			support for 6byte/512byte hardware ECC
+ *			read_ecc, write_ecc extended for different oob-layout
+ *			oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
+ *			NAND_YAFFS_OOB
+ *  11-25-2002 tglx	Added Manufacturer code FUJITSU, NATIONAL
+ *			Split manufacturer and device ID structures 
+ *
+ *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
+ *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
+ *			update of nand_chip structure description
+ */
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/config.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+
+struct mtd_info;
+/* Scan and identify a NAND device */
+extern int nand_scan (struct mtd_info *mtd, int max_chips);
+/* Free resources held by the NAND device */
+extern void nand_release (struct mtd_info *mtd);
+
+/* Read raw data from the device without ECC */
+extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
+
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS		8
+
+/* This constant declares the max. oobsize / page, which
+ * is supported now. If you add a chip with bigger oobsize/page
+ * adjust this accordingly.
+ */
+#define NAND_MAX_OOBSIZE	64
+
+/*
+ * Constants for hardware specific CLE/ALE/NCE function
+*/
+/* Select the chip by setting nCE to low */
+#define NAND_CTL_SETNCE 	1
+/* Deselect the chip by setting nCE to high */
+#define NAND_CTL_CLRNCE		2
+/* Select the command latch by setting CLE to high */
+#define NAND_CTL_SETCLE		3
+/* Deselect the command latch by setting CLE to low */
+#define NAND_CTL_CLRCLE		4
+/* Select the address latch by setting ALE to high */
+#define NAND_CTL_SETALE		5
+/* Deselect the address latch by setting ALE to low */
+#define NAND_CTL_CLRALE		6
+/* Set write protection by setting WP to high. Not used! */
+#define NAND_CTL_SETWP		7
+/* Clear write protection by setting WP to low. Not used! */
+#define NAND_CTL_CLRWP		8
+
+/*
+ * Standard NAND flash commands
+ */
+#define NAND_CMD_READ0		0
+#define NAND_CMD_READ1		1
+#define NAND_CMD_PAGEPROG	0x10
+#define NAND_CMD_READOOB	0x50
+#define NAND_CMD_ERASE1		0x60
+#define NAND_CMD_STATUS		0x70
+#define NAND_CMD_STATUS_MULTI	0x71
+#define NAND_CMD_SEQIN		0x80
+#define NAND_CMD_READID		0x90
+#define NAND_CMD_ERASE2		0xd0
+#define NAND_CMD_RESET		0xff
+
+/* Extended commands for large page devices */
+#define NAND_CMD_READSTART	0x30
+#define NAND_CMD_CACHEDPROG	0x15
+
+/* Status bits */
+#define NAND_STATUS_FAIL	0x01
+#define NAND_STATUS_FAIL_N1	0x02
+#define NAND_STATUS_TRUE_READY	0x20
+#define NAND_STATUS_READY	0x40
+#define NAND_STATUS_WP		0x80
+
+/* 
+ * Constants for ECC_MODES
+ */
+
+/* No ECC. Usage is not recommended ! */
+#define NAND_ECC_NONE		0
+/* Software ECC 3 byte ECC per 256 Byte data */
+#define NAND_ECC_SOFT		1
+/* Hardware ECC 3 byte ECC per 256 Byte data */
+#define NAND_ECC_HW3_256	2
+/* Hardware ECC 3 byte ECC per 512 Byte data */
+#define NAND_ECC_HW3_512	3
+/* Hardware ECC 3 byte ECC per 512 Byte data */
+#define NAND_ECC_HW6_512	4
+/* Hardware ECC 8 byte ECC per 512 Byte data */
+#define NAND_ECC_HW8_512	6
+/* Hardware ECC 12 byte ECC per 2048 Byte data */
+#define NAND_ECC_HW12_2048	7
+
+/*
+ * Constants for Hardware ECC
+*/
+/* Reset Hardware ECC for read */
+#define NAND_ECC_READ		0
+/* Reset Hardware ECC for write */
+#define NAND_ECC_WRITE		1
+/* Enable Hardware ECC before syndrom is read back from flash */
+#define NAND_ECC_READSYN	2
+
+/* Option constants for bizarre disfunctionality and real
+*  features
+*/
+/* Chip can not auto increment pages */
+#define NAND_NO_AUTOINCR	0x00000001
+/* Buswitdh is 16 bit */
+#define NAND_BUSWIDTH_16	0x00000002
+/* Device supports partial programming without padding */
+#define NAND_NO_PADDING		0x00000004
+/* Chip has cache program function */
+#define NAND_CACHEPRG		0x00000008
+/* Chip has copy back function */
+#define NAND_COPYBACK		0x00000010
+/* AND Chip which has 4 banks and a confusing page / block 
+ * assignment. See Renesas datasheet for further information */
+#define NAND_IS_AND		0x00000020
+/* Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits */
+#define NAND_4PAGE_ARRAY	0x00000040 
+
+/* Options valid for Samsung large page devices */
+#define NAND_SAMSUNG_LP_OPTIONS \
+	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
+
+/* Macros to identify the above */
+#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
+#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
+#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+
+/* Mask to zero out the chip options, which come from the id table */
+#define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
+
+/* Non chip related options */
+/* Use a flash based bad block table. This option is passed to the
+ * default bad block table function. */
+#define NAND_USE_FLASH_BBT	0x00010000
+/* The hw ecc generator provides a syndrome instead a ecc value on read 
+ * This can only work if we have the ecc bytes directly behind the 
+ * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
+#define NAND_HWECC_SYNDROME	0x00020000
+
+
+/* Options set by nand scan */
+/* Nand scan has allocated oob_buf */
+#define NAND_OOBBUF_ALLOC	0x40000000
+/* Nand scan has allocated data_buf */
+#define NAND_DATABUF_ALLOC	0x80000000
+
+
+/*
+ * nand_state_t - chip states
+ * Enumeration for NAND flash chip state
+ */
+typedef enum {
+	FL_READY,
+	FL_READING,
+	FL_WRITING,
+	FL_ERASING,
+	FL_SYNCING,
+	FL_CACHEDPRG,
+} nand_state_t;
+
+/* Keep gcc happy */
+struct nand_chip;
+
+/**
+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
+ * @lock:               protection lock  
+ * @active:		the mtd device which holds the controller currently
+ */
+struct nand_hw_control {
+	spinlock_t	 lock;
+	struct nand_chip *active;
+};
+
+/**
+ * struct nand_chip - NAND Private Flash Chip Data
+ * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device 
+ * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device 
+ * @read_byte:		[REPLACEABLE] read one byte from the chip
+ * @write_byte:		[REPLACEABLE] write one byte to the chip
+ * @read_word:		[REPLACEABLE] read one word from the chip
+ * @write_word:		[REPLACEABLE] write one word to the chip
+ * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
+ * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
+ * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip data
+ * @select_chip:	[REPLACEABLE] select chip nr
+ * @block_bad:		[REPLACEABLE] check, if the block is bad
+ * @block_markbad:	[REPLACEABLE] mark the block bad
+ * @hwcontrol:		[BOARDSPECIFIC] hardwarespecific function for accesing control-lines
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
+ *			If set to NULL no access to ready/busy is available and the ready/busy information
+ *			is read from the chip status register
+ * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing commands to the chip
+ * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on ready
+ * @calculate_ecc: 	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
+ * @correct_data:	[REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
+ * @enable_hwecc:	[BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
+ *			be provided if a hardware ECC is available
+ * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
+ * @scan_bbt:		[REPLACEABLE] function to scan bad block table
+ * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines 
+ * @eccsize: 		[INTERN] databytes used per ecc-calculation
+ * @eccbytes: 		[INTERN] number of ecc bytes per ecc-calculation step
+ * @eccsteps:		[INTERN] number of ecc calculation steps per page
+ * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
+ * @chip_lock:		[INTERN] spinlock used to protect access to this structure and the chip
+ * @wq:			[INTERN] wait queue to sleep on if a NAND operation is in progress
+ * @state: 		[INTERN] the current state of the NAND device
+ * @page_shift:		[INTERN] number of address bits in a page (column address bits)
+ * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
+ * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
+ * @chip_shift:		[INTERN] number of address bits in one chip
+ * @data_buf:		[INTERN] internal buffer for one page + oob 
+ * @oob_buf:		[INTERN] oob buffer for one eraseblock
+ * @oobdirty:		[INTERN] indicates that oob_buf must be reinitialized
+ * @data_poi:		[INTERN] pointer to a data buffer
+ * @options:		[BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
+ *			special functionality. See the defines for further explanation
+ * @badblockpos:	[INTERN] position of the bad block marker in the oob area
+ * @numchips:		[INTERN] number of physical chips
+ * @chipsize:		[INTERN] the size of one chip for multichip arrays
+ * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
+ * @pagebuf:		[INTERN] holds the pagenumber which is currently in data_buf
+ * @autooob:		[REPLACEABLE] the default (auto)placement scheme
+ * @bbt:		[INTERN] bad block table pointer
+ * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash lookup
+ * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan 
+ * @controller:		[OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
+ * @priv:		[OPTIONAL] pointer to private chip date
+ */
+ 
+struct nand_chip {
+	void  __iomem	*IO_ADDR_R;
+	void  __iomem 	*IO_ADDR_W;
+	
+	u_char		(*read_byte)(struct mtd_info *mtd);
+	void		(*write_byte)(struct mtd_info *mtd, u_char byte);
+	u16		(*read_word)(struct mtd_info *mtd);
+	void		(*write_word)(struct mtd_info *mtd, u16 word);
+	
+	void		(*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
+	void		(*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
+	int		(*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
+	void		(*select_chip)(struct mtd_info *mtd, int chip);
+	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+	void 		(*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int  		(*dev_ready)(struct mtd_info *mtd);
+	void 		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
+	int 		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
+	int		(*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
+	int 		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
+	void		(*erase_cmd)(struct mtd_info *mtd, int page);
+	int		(*scan_bbt)(struct mtd_info *mtd);
+	int		eccmode;
+	int		eccsize;
+	int		eccbytes;
+	int		eccsteps;
+	int 		chip_delay;
+	spinlock_t	chip_lock;
+	wait_queue_head_t wq;
+	nand_state_t 	state;
+	int 		page_shift;
+	int		phys_erase_shift;
+	int		bbt_erase_shift;
+	int		chip_shift;
+	u_char 		*data_buf;
+	u_char		*oob_buf;
+	int		oobdirty;
+	u_char		*data_poi;
+	unsigned int	options;
+	int		badblockpos;
+	int		numchips;
+	unsigned long	chipsize;
+	int		pagemask;
+	int		pagebuf;
+	struct nand_oobinfo	*autooob;
+	uint8_t		*bbt;
+	struct nand_bbt_descr	*bbt_td;
+	struct nand_bbt_descr	*bbt_md;
+	struct nand_bbt_descr	*badblock_pattern;
+	struct nand_hw_control  *controller;
+	void		*priv;
+};
+
+/*
+ * NAND Flash Manufacturer ID Codes
+ */
+#define NAND_MFR_TOSHIBA	0x98
+#define NAND_MFR_SAMSUNG	0xec
+#define NAND_MFR_FUJITSU	0x04
+#define NAND_MFR_NATIONAL	0x8f
+#define NAND_MFR_RENESAS	0x07
+#define NAND_MFR_STMICRO	0x20
+
+/**
+ * struct nand_flash_dev - NAND Flash Device ID Structure
+ *
+ * @name:  	Identify the device type
+ * @id:   	device ID code
+ * @pagesize:  	Pagesize in bytes. Either 256 or 512 or 0
+ *		If the pagesize is 0, then the real pagesize 
+ *		and the eraseize are determined from the
+ *		extended id bytes in the chip
+ * @erasesize: 	Size of an erase block in the flash device.
+ * @chipsize:  	Total chipsize in Mega Bytes
+ * @options:	Bitfield to store chip relevant options
+ */
+struct nand_flash_dev {
+	char *name;
+	int id;
+	unsigned long pagesize;
+	unsigned long chipsize;
+	unsigned long erasesize;
+	unsigned long options;
+};
+
+/**
+ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * @name:	Manufacturer name
+ * @id: 	manufacturer ID code of device.
+*/
+struct nand_manufacturers {
+	int id;
+	char * name;
+};
+
+extern struct nand_flash_dev nand_flash_ids[];
+extern struct nand_manufacturers nand_manuf_ids[];
+
+/** 
+ * struct nand_bbt_descr - bad block table descriptor
+ * @options:	options for this descriptor
+ * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ *		when bbt is searched, then we store the found bbts pages here.
+ *		Its an array and supports up to 8 chips now
+ * @offs:	offset of the pattern in the oob area of the page
+ * @veroffs:	offset of the bbt version counter in the oob are of the page
+ * @version:	version read from the bbt page during scan
+ * @len:	length of the pattern, if 0 no pattern check is performed
+ * @maxblocks:	maximum number of blocks to search for a bbt. This number of
+ *		blocks is reserved at the end of the device where the tables are 
+ *		written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ *              bad) block in the stored bbt
+ * @pattern:	pattern to identify bad block table or factory marked good / 
+ *		bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the 
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+	int	options;
+	int	pages[NAND_MAX_CHIPS];
+	int	offs;
+	int	veroffs;
+	uint8_t	version[NAND_MAX_CHIPS];
+	int	len;
+	int 	maxblocks;
+	int	reserved_block_code;
+	uint8_t	*pattern;
+};
+
+/* Options for the bad block table descriptors */
+
+/* The number of bits used per block in the bbt on the device */
+#define NAND_BBT_NRBITS_MSK	0x0000000F
+#define NAND_BBT_1BIT		0x00000001
+#define NAND_BBT_2BIT		0x00000002
+#define NAND_BBT_4BIT		0x00000004
+#define NAND_BBT_8BIT		0x00000008
+/* The bad block table is in the last good block of the device */
+#define	NAND_BBT_LASTBLOCK	0x00000010
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_ABSPAGE	0x00000020
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_SEARCH		0x00000040
+/* bbt is stored per chip on multichip devices */
+#define NAND_BBT_PERCHIP	0x00000080
+/* bbt has a version counter at offset veroffs */
+#define NAND_BBT_VERSION	0x00000100
+/* Create a bbt if none axists */
+#define NAND_BBT_CREATE		0x00000200
+/* Search good / bad pattern through all pages of a block */
+#define NAND_BBT_SCANALLPAGES	0x00000400
+/* Scan block empty during good / bad block scan */
+#define NAND_BBT_SCANEMPTY	0x00000800
+/* Write bbt if neccecary */
+#define NAND_BBT_WRITE		0x00001000
+/* Read and write back block contents when writing bbt */
+#define NAND_BBT_SAVECONTENT	0x00002000
+/* Search good / bad pattern on the first and the second page */
+#define NAND_BBT_SCAN2NDPAGE	0x00004000
+
+/* The maximum number of blocks to scan for a bbt */
+#define NAND_BBT_SCAN_MAXBLOCKS	4
+
+extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
+extern int nand_default_bbt (struct mtd_info *mtd);
+extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
+extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
+
+/*
+* Constants for oob configuration
+*/
+#define NAND_SMALL_BADBLOCK_POS		5
+#define NAND_LARGE_BADBLOCK_POS		0
+
+#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
new file mode 100644
index 000000000000..12c5bc342ead
--- /dev/null
+++ b/include/linux/mtd/nand_ecc.h
@@ -0,0 +1,30 @@
+/*
+ *  drivers/mtd/nand_ecc.h
+ *
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the ECC algorithm.
+ */
+
+#ifndef __MTD_NAND_ECC_H__
+#define __MTD_NAND_ECC_H__
+
+struct mtd_info;
+
+/*
+ * Calculate 3 byte ECC code for 256 byte block
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
+
+/*
+ * Detect and correct a 1 bit error for 256 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+
+#endif /* __MTD_NAND_ECC_H__ */
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
new file mode 100644
index 000000000000..d35d2c21ff3e
--- /dev/null
+++ b/include/linux/mtd/nftl.h
@@ -0,0 +1,54 @@
+/*
+ * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
+ *
+ * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#ifndef __MTD_NFTL_H__
+#define __MTD_NFTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+
+#include <mtd/nftl-user.h>
+
+/* these info are used in ReplUnitTable */
+#define BLOCK_NIL          0xffff /* last block of a chain */
+#define BLOCK_FREE         0xfffe /* free block */
+#define BLOCK_NOTEXPLORED  0xfffd /* non explored block, only used during mounting */
+#define BLOCK_RESERVED     0xfffc /* bios block or bad block */
+
+struct NFTLrecord {
+	struct mtd_blktrans_dev mbd;
+	__u16 MediaUnit, SpareMediaUnit;
+	__u32 EraseSize;
+	struct NFTLMediaHeader MediaHdr;
+	int usecount;
+	unsigned char heads;
+	unsigned char sectors;
+	unsigned short cylinders;
+	__u16 numvunits;
+	__u16 lastEUN;                  /* should be suppressed */
+	__u16 numfreeEUNs;
+	__u16 LastFreeEUN; 		/* To speed up finding a free EUN */
+	int head,sect,cyl;
+	__u16 *EUNtable; 		/* [numvunits]: First EUN for each virtual unit  */
+	__u16 *ReplUnitTable; 		/* [numEUNs]: ReplUnitNumber for each */
+        unsigned int nb_blocks;		/* number of physical blocks */
+        unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
+        struct erase_info instr;
+	struct nand_oobinfo oobinfo;
+};
+
+int NFTL_mount(struct NFTLrecord *s);
+int NFTL_formatblock(struct NFTLrecord *s, int block);
+
+#ifndef NFTL_MAJOR
+#define NFTL_MAJOR 93
+#endif
+
+#define MAX_NFTLS 16
+#define MAX_SECTORS_PER_UNIT 64
+#define NFTL_PARTN_BITS 4
+
+#endif /* __MTD_NFTL_H__ */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
new file mode 100644
index 000000000000..50b2edfc8f11
--- /dev/null
+++ b/include/linux/mtd/partitions.h
@@ -0,0 +1,75 @@
+/*
+ * MTD partitioning layer definitions
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *
+ * This code is GPL
+ *
+ * $Id: partitions.h,v 1.16 2004/11/16 18:34:40 dwmw2 Exp $
+ */
+
+#ifndef MTD_PARTITIONS_H
+#define MTD_PARTITIONS_H
+
+#include <linux/types.h>
+
+
+/*
+ * Partition definition structure:
+ * 
+ * An array of struct partition is passed along with a MTD object to
+ * add_mtd_partitions() to create them.
+ *
+ * For each partition, these fields are available:
+ * name: string that will be used to label the partition's MTD device.
+ * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition 
+ * 	will extend to the end of the master MTD device.
+ * offset: absolute starting position within the master MTD device; if 
+ * 	defined as MTDPART_OFS_APPEND, the partition will start where the 
+ * 	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ * mask_flags: contains flags that have to be masked (removed) from the 
+ * 	master MTD flag set for the corresponding MTD partition.
+ * 	For example, to force a read-only partition, simply adding 
+ * 	MTD_WRITEABLE to the mask_flags will do the trick.
+ *
+ * Note: writeable partitions require their size and offset be 
+ * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+ */ 
+
+struct mtd_partition {
+	char *name;			/* identifier string */
+	u_int32_t size;			/* partition size */
+	u_int32_t offset;		/* offset within the master MTD space */
+	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
+	struct nand_oobinfo *oobsel;	/* out of band layout for this partition (NAND only)*/
+	struct mtd_info **mtdp;		/* pointer to store the MTD object */
+};
+
+#define MTDPART_OFS_NXTBLK	(-2)
+#define MTDPART_OFS_APPEND	(-1)
+#define MTDPART_SIZ_FULL	(0)
+
+
+int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+int del_mtd_partitions(struct mtd_info *);
+
+/*
+ * Functions dealing with the various ways of partitioning the space
+ */
+
+struct mtd_part_parser {
+	struct list_head list;
+	struct module *owner;
+	const char *name;
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+};
+
+extern int register_mtd_parser(struct mtd_part_parser *parser);
+extern int deregister_mtd_parser(struct mtd_part_parser *parser);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types, 
+				struct mtd_partition **pparts, unsigned long origin);
+
+#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
+
+#endif
+
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
new file mode 100644
index 000000000000..05aa4970677f
--- /dev/null
+++ b/include/linux/mtd/physmap.h
@@ -0,0 +1,61 @@
+/*
+ * For boards with physically mapped flash and using 
+ * drivers/mtd/maps/physmap.c mapping driver.
+ *
+ * $Id: physmap.h,v 1.3 2004/07/21 00:16:15 jwboyer Exp $
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MTD_PHYSMAP__
+
+#include <linux/config.h>
+
+#if defined(CONFIG_MTD_PHYSMAP) 
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+/*
+ * The map_info for physmap.  Board can override size, buswidth, phys,
+ * (*set_vpp)(), etc in their initial setup routine.
+ */
+extern struct map_info physmap_map;
+
+/*
+ * Board needs to specify the exact mapping during their setup time.
+ */
+static inline void physmap_configure(unsigned long addr, unsigned long size, int bankwidth, void (*set_vpp)(struct map_info *, int) )
+{
+	physmap_map.phys = addr;
+	physmap_map.size = size;
+	physmap_map.bankwidth = bankwidth;
+	physmap_map.set_vpp = set_vpp;
+}
+
+#if defined(CONFIG_MTD_PARTITIONS)
+
+/*
+ * Machines that wish to do flash partition may want to call this function in 
+ * their setup routine.  
+ *
+ *	physmap_set_partitions(mypartitions, num_parts);
+ *
+ * Note that one can always override this hard-coded partition with 
+ * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
+ */
+void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
+
+#endif /* defined(CONFIG_MTD_PARTITIONS) */
+#endif /* defined(CONFIG_MTD) */
+
+#endif /* __LINUX_MTD_PHYSMAP__ */
+
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
new file mode 100644
index 000000000000..113e3087f68a
--- /dev/null
+++ b/include/linux/mtd/pmc551.h
@@ -0,0 +1,79 @@
+/*
+ * $Id: pmc551.h,v 1.5 2003/01/24 16:49:53 dwmw2 Exp $
+ *
+ * PMC551 PCI Mezzanine Ram Device
+ *
+ * Author:
+ *       Mark Ferrell
+ *       Copyright 1999,2000 Nortel Networks
+ *
+ * License: 
+ *	 As part of this driver was derrived from the slram.c driver it falls
+ *	 under the same license, which is GNU General Public License v2
+ */
+
+#ifndef __MTD_PMC551_H__
+#define __MTD_PMC551_H__
+
+#include <linux/mtd/mtd.h>
+
+#define PMC551_VERSION "$Id: pmc551.h,v 1.5 2003/01/24 16:49:53 dwmw2 Exp $\n"\
+       "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
+
+/*
+ * Our personal and private information
+ */
+struct mypriv {
+        struct pci_dev *dev;
+        u_char *start;
+        u32    base_map0;
+        u32    curr_map0;
+        u32    asize;
+	struct mtd_info *nextpmc551;
+};                       
+
+/*
+ * Function Prototypes
+ */
+static int pmc551_erase(struct mtd_info *, struct erase_info *);
+static void pmc551_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
+static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);        
+
+
+/*
+ * Define the PCI ID's if the kernel doesn't define them for us
+ */
+#ifndef PCI_VENDOR_ID_V3_SEMI
+#define PCI_VENDOR_ID_V3_SEMI             0x11b0
+#endif
+
+#ifndef PCI_DEVICE_ID_V3_SEMI_V370PDC
+#define PCI_DEVICE_ID_V3_SEMI_V370PDC     0x0200  
+#endif
+
+
+#define PMC551_PCI_MEM_MAP0	0x50
+#define PMC551_PCI_MEM_MAP1	0x54
+#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK	0x3ff00000
+#define PMC551_PCI_MEM_MAP_APERTURE_MASK	0x000000f0
+#define PMC551_PCI_MEM_MAP_REG_EN		0x00000002
+#define PMC551_PCI_MEM_MAP_ENABLE		0x00000001
+
+#define PMC551_SDRAM_MA		0x60
+#define PMC551_SDRAM_CMD	0x62
+#define PMC551_DRAM_CFG		0x64
+#define PMC551_SYS_CTRL_REG	0x78
+
+#define PMC551_DRAM_BLK0	0x68
+#define PMC551_DRAM_BLK1	0x6c
+#define PMC551_DRAM_BLK2	0x70
+#define PMC551_DRAM_BLK3	0x74
+#define PMC551_DRAM_BLK_GET_SIZE(x) (524288<<((x>>4)&0x0f))
+#define PMC551_DRAM_BLK_SET_COL_MUX(x,v) (((x) & ~0x00007000) | (((v) & 0x7) << 12))
+#define PMC551_DRAM_BLK_SET_ROW_MUX(x,v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8))
+
+
+#endif /* __MTD_PMC551_H__ */
+
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
new file mode 100644
index 000000000000..fc071125cbcc
--- /dev/null
+++ b/include/linux/mtd/xip.h
@@ -0,0 +1,107 @@
+/*
+ * MTD primitives for XIP support
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This XIP support for MTD has been loosely inspired
+ * by an earlier patch authored by David Woodhouse.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __LINUX_MTD_XIP_H__
+#define __LINUX_MTD_XIP_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MTD_XIP
+
+/*
+ * Function that are modifying the flash state away from array mode must
+ * obviously not be running from flash.  The __xipram is therefore marking
+ * those functions so they get relocated to ram.
+ */
+#define __xipram __attribute__ ((__section__ (".data")))
+
+/*
+ * We really don't want gcc to guess anything.
+ * We absolutely _need_ proper inlining.
+ */
+#include <linux/compiler.h>
+
+/*
+ * Each architecture has to provide the following macros.  They must access
+ * the hardware directly and not rely on any other (XIP) functions since they
+ * won't be available when used (flash not in array mode).
+ *
+ * xip_irqpending()
+ *
+ * 	return non zero when any hardware interrupt is pending.
+ *
+ * xip_currtime()
+ *
+ * 	return a platform specific time reference to be used with
+ * 	xip_elapsed_since().
+ *
+ * xip_elapsed_since(x)
+ *
+ * 	return in usecs the elapsed timebetween now and the reference x as
+ * 	returned by xip_currtime().
+ *
+ * 	note 1: convertion to usec can be approximated, as long as the
+ * 		returned value is <= the real elapsed time.
+ * 	note 2: this should be able to cope with a few seconds without
+ * 		overflowing.
+ */
+
+#if defined(CONFIG_ARCH_SA1100) || defined(CONFIG_ARCH_PXA)
+
+#include <asm/hardware.h>
+#ifdef CONFIG_ARCH_PXA
+#include <asm/arch/pxa-regs.h>
+#endif
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+#else
+
+#warning "missing IRQ and timer primitives for XIP MTD support"
+#warning "some of the XIP MTD support code will be disabled"
+#warning "your system will therefore be unresponsive when writing or erasing flash"
+
+#define xip_irqpending()	(0)
+#define xip_currtime()		(0)
+#define xip_elapsed_since(x)	(0)
+
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#if defined(CONFIG_CPU_XSCALE)
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+#else
+#define xip_cpu_idle()  do { } while (0)
+#endif
+
+#else
+
+#define __xipram
+
+#endif /* CONFIG_MTD_XIP */
+
+#endif /* __LINUX_MTD_XIP_H__ */
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
new file mode 100644
index 000000000000..8c66151821e3
--- /dev/null
+++ b/include/linux/mtio.h
@@ -0,0 +1,351 @@
+/* 
+ * linux/mtio.h header file for Linux. Written by H. Bergman
+ *
+ * Modified for special ioctls provided by zftape in September 1997
+ * by C.-J. Heine.
+ */
+
+#ifndef _LINUX_MTIO_H
+#define _LINUX_MTIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/qic117.h>
+
+/*
+ * Structures and definitions for mag tape io control commands
+ */
+
+/* structure for MTIOCTOP - mag tape op command */
+struct	mtop {
+	short	mt_op;		/* operations defined below */
+	int	mt_count;	/* how many of them */
+};
+
+/* Magnetic Tape operations [Not all operations supported by all drivers]: */
+#define MTRESET 0	/* +reset drive in case of problems */
+#define MTFSF	1	/* forward space over FileMark,
+			 * position at first record of next file 
+			 */
+#define MTBSF	2	/* backward space FileMark (position before FM) */
+#define MTFSR	3	/* forward space record */
+#define MTBSR	4	/* backward space record */
+#define MTWEOF	5	/* write an end-of-file record (mark) */
+#define MTREW	6	/* rewind */
+#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
+#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
+#define MTRETEN 9	/* retension tape */
+#define MTBSFM	10	/* +backward space FileMark, position at FM */
+#define MTFSFM  11	/* +forward space FileMark, position at FM */
+#define MTEOM	12	/* goto end of recorded media (for appending files).
+			 * MTEOM positions after the last FM, ready for
+			 * appending another file.
+			 */
+#define MTERASE 13	/* erase tape -- be careful! */
+
+#define MTRAS1  14	/* run self test 1 (nondestructive) */
+#define MTRAS2	15	/* run self test 2 (destructive) */
+#define MTRAS3  16	/* reserved for self test 3 */
+
+#define MTSETBLK 20	/* set block length (SCSI) */
+#define MTSETDENSITY 21	/* set tape density (SCSI) */
+#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
+#define MTTELL	23	/* tell block (Tandberg, etc.) */
+#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
+			/* ordinary buffered operation with code 1 */
+#define MTFSS	25	/* space forward over setmarks */
+#define MTBSS	26	/* space backward over setmarks */
+#define MTWSM	27	/* write setmarks */
+
+#define MTLOCK  28	/* lock the drive door */
+#define MTUNLOCK 29	/* unlock the drive door */
+#define MTLOAD  30	/* execute the SCSI load command */
+#define MTUNLOAD 31	/* execute the SCSI unload command */
+#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
+#define MTSETPART 33	/* Change the active tape partition */
+#define MTMKPART  34	/* Format the tape with one or two partitions */
+
+/* structure for MTIOCGET - mag tape get status command */
+
+struct	mtget {
+	long	mt_type;	/* type of magtape device */
+	long	mt_resid;	/* residual count: (not sure)
+				 *	number of bytes ignored, or
+				 *	number of files not skipped, or
+				 *	number of records not skipped.
+				 */
+	/* the following registers are device dependent */
+	long	mt_dsreg;	/* status register */
+	long	mt_gstat;	/* generic (device independent) status */
+	long	mt_erreg;	/* error register */
+	/* The next two fields are not always used */
+	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
+	__kernel_daddr_t mt_blkno;	/* current block number */
+};
+
+
+
+/*
+ * Constants for mt_type. Not all of these are supported,
+ * and these are not all of the ones that are supported.
+ */
+#define MT_ISUNKNOWN		0x01
+#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
+#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
+#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
+#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
+#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
+#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
+#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
+#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
+#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
+#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
+#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
+#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
+#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
+#define MT_ISDDS1		0x51	/* DDS device without partitions */
+#define MT_ISDDS2		0x52	/* DDS device with partitions */
+#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
+					  and SCSI emulated (DI, DP, USB) */
+#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
+#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
+
+/* QIC-40/80/3010/3020 ftape supported drives.
+ * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
+ */
+#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
+#define MT_ISFTAPE_FLAG	0x800000
+
+struct mt_tape_info {
+	long t_type;		/* device type id (mt_type) */
+	char *t_name;		/* descriptive name */
+};
+
+#define MT_TAPE_INFO	{ \
+	{MT_ISUNKNOWN,		"Unknown type of tape device"}, \
+	{MT_ISQIC02,		"Generic QIC-02 tape streamer"}, \
+	{MT_ISWT5150,		"Wangtek 5150, QIC-150"}, \
+	{MT_ISARCHIVE_5945L2,	"Archive 5945L-2"}, \
+	{MT_ISCMSJ500,		"CMS Jumbo 500"}, \
+	{MT_ISTDC3610,		"Tandberg TDC 3610, QIC-24"}, \
+	{MT_ISARCHIVE_VP60I,	"Archive VP60i, QIC-02"}, \
+	{MT_ISARCHIVE_2150L,	"Archive Viper 2150L"}, \
+	{MT_ISARCHIVE_2060L,	"Archive Viper 2060L"}, \
+	{MT_ISARCHIVESC499,	"Archive SC-499 QIC-36 controller"}, \
+	{MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
+	{MT_ISWT5099EEN24,	"Wangtek 5099-een24, 60MB"}, \
+	{MT_ISTEAC_MT2ST,	"Teac MT-2ST 155mb data cassette drive"}, \
+	{MT_ISEVEREX_FT40A,	"Everex FT40A, QIC-40"}, \
+	{MT_ISONSTREAM_SC,      "OnStream SC-, DI-, DP-, or USB tape drive"}, \
+	{MT_ISSCSI1,		"Generic SCSI-1 tape"}, \
+	{MT_ISSCSI2,		"Generic SCSI-2 tape"}, \
+	{0, NULL} \
+}
+
+
+/* structure for MTIOCPOS - mag tape get position command */
+
+struct	mtpos {
+	long 	mt_blkno;	/* current block number */
+};
+
+
+/*  structure for MTIOCVOLINFO, query information about the volume
+ *  currently positioned at (zftape)
+ */
+struct mtvolinfo {
+	unsigned int mt_volno;   /* vol-number */
+	unsigned int mt_blksz;   /* blocksize used when recording */
+	unsigned int mt_rawsize; /* raw tape space consumed, in kb */
+	unsigned int mt_size;    /* volume size after decompression, in kb */
+	unsigned int mt_cmpr:1;  /* this volume has been compressed */
+};
+
+/* raw access to a floppy drive, read and write an arbitrary segment.
+ * For ftape/zftape to support formatting etc.
+ */
+#define MT_FT_RD_SINGLE  0
+#define MT_FT_RD_AHEAD   1
+#define MT_FT_WR_ASYNC   0 /* start tape only when all buffers are full     */
+#define MT_FT_WR_MULTI   1 /* start tape, continue until buffers are empty  */
+#define MT_FT_WR_SINGLE  2 /* write a single segment and stop afterwards    */
+#define MT_FT_WR_DELETE  3 /* write deleted data marks, one segment at time */
+
+struct mtftseg
+{            
+	unsigned mt_segno;   /* the segment to read or write */
+	unsigned mt_mode;    /* modes for read/write (sync/async etc.) */
+	int      mt_result;  /* result of r/w request, not of the ioctl */
+	void    __user *mt_data;    /* User space buffer: must be 29kb */
+};
+
+/* get tape capacity (ftape/zftape)
+ */
+struct mttapesize {
+	unsigned long mt_capacity; /* entire, uncompressed capacity 
+				    * of a cartridge
+				    */
+	unsigned long mt_used;     /* what has been used so far, raw 
+				    * uncompressed amount
+				    */
+};
+
+/*  possible values of the ftfmt_op field
+ */
+#define FTFMT_SET_PARMS		1 /* set software parms */
+#define FTFMT_GET_PARMS		2 /* get software parms */
+#define FTFMT_FORMAT_TRACK	3 /* start formatting a tape track   */
+#define FTFMT_STATUS		4 /* monitor formatting a tape track */
+#define FTFMT_VERIFY		5 /* verify the given segment        */
+
+struct ftfmtparms {
+	unsigned char  ft_qicstd;   /* QIC-40/QIC-80/QIC-3010/QIC-3020 */
+	unsigned char  ft_fmtcode;  /* Refer to the QIC specs */
+	unsigned char  ft_fhm;      /* floppy head max */
+	unsigned char  ft_ftm;      /* floppy track max */
+	unsigned short ft_spt;      /* segments per track */
+	unsigned short ft_tpc;      /* tracks per cartridge */
+};
+
+struct ftfmttrack {
+	unsigned int  ft_track;   /* track to format */
+	unsigned char ft_gap3;    /* size of gap3, for FORMAT_TRK */
+};
+
+struct ftfmtstatus {
+	unsigned int  ft_segment;  /* segment currently being formatted */
+};
+
+struct ftfmtverify {
+	unsigned int  ft_segment;   /* segment to verify */
+	unsigned long ft_bsm;       /* bsm as result of VERIFY cmd */
+};
+
+struct mtftformat {
+	unsigned int fmt_op;      /* operation to perform */
+	union fmt_arg {
+		struct ftfmtparms  fmt_parms;  /* format parameters */
+		struct ftfmttrack  fmt_track;  /* ctrl while formatting */
+		struct ftfmtstatus fmt_status;
+		struct ftfmtverify fmt_verify; /* for verifying */ 
+	} fmt_arg;
+};
+
+struct mtftcmd {
+	unsigned int ft_wait_before; /* timeout to wait for drive to get ready 
+				      * before command is sent. Milliseconds
+				      */
+	qic117_cmd_t ft_cmd;         /* command to send */
+	unsigned char ft_parm_cnt;   /* zero: no parm is sent. */
+	unsigned char ft_parms[3];   /* parameter(s) to send to
+				      * the drive. The parms are nibbles
+				      * driver sends cmd + 2 step pulses */
+	unsigned int ft_result_bits; /* if non zero, number of bits
+				      *	returned by the tape drive
+				      */
+	unsigned int ft_result;      /* the result returned by the tape drive*/
+	unsigned int ft_wait_after;  /* timeout to wait for drive to get ready
+				      * after command is sent. 0: don't wait */
+	int ft_status;	             /* status returned by ready wait
+				      * undefined if timeout was 0.
+				      */
+	int ft_error;                /* error code if error status was set by 
+				      * command
+				      */
+};
+
+/* mag tape io control commands */
+#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
+#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
+#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
+
+/* The next two are used by the QIC-02 driver for runtime reconfiguration.
+ * See tpqic02.h for struct mtconfiginfo.
+ */
+#define	MTIOCGETCONFIG	_IOR('m', 4, struct mtconfiginfo) /* get tape config */
+#define	MTIOCSETCONFIG	_IOW('m', 5, struct mtconfiginfo) /* set tape config */
+
+/* the next six are used by the floppy ftape drivers and its frontends
+ * sorry, but MTIOCTOP commands are write only.
+ */
+#define	MTIOCRDFTSEG    _IOWR('m', 6, struct mtftseg)  /* read a segment */
+#define	MTIOCWRFTSEG    _IOWR('m', 7, struct mtftseg)   /* write a segment */
+#define MTIOCVOLINFO	_IOR('m',  8, struct mtvolinfo) /* info about volume */
+#define MTIOCGETSIZE    _IOR('m',  9, struct mttapesize)/* get cartridge size*/
+#define MTIOCFTFORMAT   _IOWR('m', 10, struct mtftformat) /* format ftape */
+#define MTIOCFTCMD	_IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */
+
+/* Generic Mag Tape (device independent) status macros for examining
+ * mt_gstat -- HP-UX compatible.
+ * There is room for more generic status bits here, but I don't
+ * know which of them are reserved. At least three or so should
+ * be added to make this really useful.
+ */
+#define GMT_EOF(x)              ((x) & 0x80000000)
+#define GMT_BOT(x)              ((x) & 0x40000000)
+#define GMT_EOT(x)              ((x) & 0x20000000)
+#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
+#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
+#define GMT_WR_PROT(x)          ((x) & 0x04000000)
+/* #define GMT_ ? 		((x) & 0x02000000) */
+#define GMT_ONLINE(x)           ((x) & 0x01000000)
+#define GMT_D_6250(x)           ((x) & 0x00800000)
+#define GMT_D_1600(x)           ((x) & 0x00400000)
+#define GMT_D_800(x)            ((x) & 0x00200000)
+/* #define GMT_ ? 		((x) & 0x00100000) */
+/* #define GMT_ ? 		((x) & 0x00080000) */
+#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
+/* #define GMT_ ? 		((x) & 0x00020000) */
+#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
+#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
+/* 15 generic status bits unused */
+
+
+/* SCSI-tape specific definitions */
+/* Bitfield shifts in the status  */
+#define MT_ST_BLKSIZE_SHIFT	0
+#define MT_ST_BLKSIZE_MASK	0xffffff
+#define MT_ST_DENSITY_SHIFT	24
+#define MT_ST_DENSITY_MASK	0xff000000
+
+#define MT_ST_SOFTERR_SHIFT	0
+#define MT_ST_SOFTERR_MASK	0xffff
+
+/* Bitfields for the MTSETDRVBUFFER ioctl */
+#define MT_ST_OPTIONS		0xf0000000
+#define MT_ST_BOOLEANS		0x10000000
+#define MT_ST_SETBOOLEANS	0x30000000
+#define MT_ST_CLEARBOOLEANS	0x40000000
+#define MT_ST_WRITE_THRESHOLD	0x20000000
+#define MT_ST_DEF_BLKSIZE	0x50000000
+#define MT_ST_DEF_OPTIONS	0x60000000
+#define MT_ST_TIMEOUTS		0x70000000
+#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
+#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
+#define MT_ST_SET_CLN		0x80000000
+
+#define MT_ST_BUFFER_WRITES	0x1
+#define MT_ST_ASYNC_WRITES	0x2
+#define MT_ST_READ_AHEAD	0x4
+#define MT_ST_DEBUGGING		0x8
+#define MT_ST_TWO_FM		0x10
+#define MT_ST_FAST_MTEOM	0x20
+#define MT_ST_AUTO_LOCK		0x40
+#define MT_ST_DEF_WRITES	0x80
+#define MT_ST_CAN_BSR		0x100
+#define MT_ST_NO_BLKLIMS	0x200
+#define MT_ST_CAN_PARTITIONS    0x400
+#define MT_ST_SCSI2LOGICAL      0x800
+#define MT_ST_SYSV              0x1000
+#define MT_ST_NOWAIT            0x2000
+
+/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
+#define MT_ST_CLEAR_DEFAULT	0xfffff
+#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
+#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
+#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
+
+/* The offset for the arguments for the special HP changer load command. */
+#define MT_ST_HPLOADER_OFFSET 10000
+
+#endif /* _LINUX_MTIO_H */
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
new file mode 100644
index 000000000000..5773ea42f6e4
--- /dev/null
+++ b/include/linux/mv643xx.h
@@ -0,0 +1,1313 @@
+/*
+ * mv643xx.h - MV-643XX Internal registers definition file.
+ *
+ * Copyright 2002 Momentum Computer, Inc.
+ * 	Author: Matthew Dharm <mdharm@momenco.com>
+ * Copyright 2002 GALILEO TECHNOLOGY, LTD. 
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_MV643XX_H
+#define __ASM_MV643XX_H
+
+#ifdef __MIPS__
+#include <asm/addrspace.h>
+#include <asm/marvell.h>
+#endif
+#include <asm/types.h>
+
+/****************************************/
+/* Processor Address Space              */
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64340_CS_0_BASE_ADDR                                      0x008
+#define MV64340_CS_0_SIZE                                           0x010
+#define MV64340_CS_1_BASE_ADDR                                      0x208
+#define MV64340_CS_1_SIZE                                           0x210
+#define MV64340_CS_2_BASE_ADDR                                      0x018
+#define MV64340_CS_2_SIZE                                           0x020
+#define MV64340_CS_3_BASE_ADDR                                      0x218
+#define MV64340_CS_3_SIZE                                           0x220
+
+/* Devices BAR and size registers */
+
+#define MV64340_DEV_CS0_BASE_ADDR                                   0x028
+#define MV64340_DEV_CS0_SIZE                                        0x030
+#define MV64340_DEV_CS1_BASE_ADDR                                   0x228
+#define MV64340_DEV_CS1_SIZE                                        0x230
+#define MV64340_DEV_CS2_BASE_ADDR                                   0x248
+#define MV64340_DEV_CS2_SIZE                                        0x250
+#define MV64340_DEV_CS3_BASE_ADDR                                   0x038
+#define MV64340_DEV_CS3_SIZE                                        0x040
+#define MV64340_BOOTCS_BASE_ADDR                                    0x238
+#define MV64340_BOOTCS_SIZE                                         0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64340_PCI_0_IO_BASE_ADDR                                  0x048
+#define MV64340_PCI_0_IO_SIZE                                       0x050
+#define MV64340_PCI_0_MEMORY0_BASE_ADDR                             0x058
+#define MV64340_PCI_0_MEMORY0_SIZE                                  0x060
+#define MV64340_PCI_0_MEMORY1_BASE_ADDR                             0x080
+#define MV64340_PCI_0_MEMORY1_SIZE                                  0x088
+#define MV64340_PCI_0_MEMORY2_BASE_ADDR                             0x258
+#define MV64340_PCI_0_MEMORY2_SIZE                                  0x260
+#define MV64340_PCI_0_MEMORY3_BASE_ADDR                             0x280
+#define MV64340_PCI_0_MEMORY3_SIZE                                  0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64340_PCI_1_IO_BASE_ADDR                                  0x090
+#define MV64340_PCI_1_IO_SIZE                                       0x098
+#define MV64340_PCI_1_MEMORY0_BASE_ADDR                             0x0a0
+#define MV64340_PCI_1_MEMORY0_SIZE                                  0x0a8
+#define MV64340_PCI_1_MEMORY1_BASE_ADDR                             0x0b0
+#define MV64340_PCI_1_MEMORY1_SIZE                                  0x0b8
+#define MV64340_PCI_1_MEMORY2_BASE_ADDR                             0x2a0
+#define MV64340_PCI_1_MEMORY2_SIZE                                  0x2a8
+#define MV64340_PCI_1_MEMORY3_BASE_ADDR                             0x2b0
+#define MV64340_PCI_1_MEMORY3_SIZE                                  0x2b8
+
+/* SRAM base address */
+#define MV64340_INTEGRATED_SRAM_BASE_ADDR                           0x268
+
+/* internal registers space base address */
+#define MV64340_INTERNAL_SPACE_BASE_ADDR                            0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1 
+   windows above */
+#define MV64340_BASE_ADDR_ENABLE                                    0x278
+
+/****************************************/
+/* PCI remap registers                  */
+/****************************************/
+      /* PCI 0 */
+#define MV64340_PCI_0_IO_ADDR_REMAP                                 0x0f0
+#define MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP                        0x0f8
+#define MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP                       0x320
+#define MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP                        0x100
+#define MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP                       0x328
+#define MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP                        0x2f8
+#define MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP                       0x330
+#define MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP                        0x300
+#define MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP                       0x338
+      /* PCI 1 */
+#define MV64340_PCI_1_IO_ADDR_REMAP                                 0x108
+#define MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP                        0x110
+#define MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP                       0x340
+#define MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP                        0x118
+#define MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP                       0x348
+#define MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP                        0x310
+#define MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP                       0x350
+#define MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP                        0x318
+#define MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP                       0x358
+ 
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_CONTROL                  0x3b0
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_BASE                     0x3b8
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_CONTROL                  0x3c0
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_BASE                     0x3c8
+#define MV64340_CPU_GE_HEADERS_RETARGET_CONTROL                     0x3d0
+#define MV64340_CPU_GE_HEADERS_RETARGET_BASE                        0x3d8
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_CONTROL                   0x3e0
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_BASE                      0x3e8
+
+/****************************************/
+/*         CPU Control Registers        */
+/****************************************/
+
+#define MV64340_CPU_CONFIG                                          0x000
+#define MV64340_CPU_MODE                                            0x120
+#define MV64340_CPU_MASTER_CONTROL                                  0x160
+#define MV64340_CPU_CROSS_BAR_CONTROL_LOW                           0x150
+#define MV64340_CPU_CROSS_BAR_CONTROL_HIGH                          0x158
+#define MV64340_CPU_CROSS_BAR_TIMEOUT                               0x168
+
+/****************************************/
+/* SMP RegisterS                        */
+/****************************************/
+
+#define MV64340_SMP_WHO_AM_I                                        0x200
+#define MV64340_SMP_CPU0_DOORBELL                                   0x214
+#define MV64340_SMP_CPU0_DOORBELL_CLEAR                             0x21C
+#define MV64340_SMP_CPU1_DOORBELL                                   0x224
+#define MV64340_SMP_CPU1_DOORBELL_CLEAR                             0x22C
+#define MV64340_SMP_CPU0_DOORBELL_MASK                              0x234
+#define MV64340_SMP_CPU1_DOORBELL_MASK                              0x23C
+#define MV64340_SMP_SEMAPHOR0                                       0x244
+#define MV64340_SMP_SEMAPHOR1                                       0x24c
+#define MV64340_SMP_SEMAPHOR2                                       0x254
+#define MV64340_SMP_SEMAPHOR3                                       0x25c
+#define MV64340_SMP_SEMAPHOR4                                       0x264
+#define MV64340_SMP_SEMAPHOR5                                       0x26c
+#define MV64340_SMP_SEMAPHOR6                                       0x274
+#define MV64340_SMP_SEMAPHOR7                                       0x27c
+
+/****************************************/
+/*  CPU Sync Barrier Register           */
+/****************************************/
+
+#define MV64340_CPU_0_SYNC_BARRIER_TRIGGER                          0x0c0
+#define MV64340_CPU_0_SYNC_BARRIER_VIRTUAL                          0x0c8
+#define MV64340_CPU_1_SYNC_BARRIER_TRIGGER                          0x0d0
+#define MV64340_CPU_1_SYNC_BARRIER_VIRTUAL                          0x0d8
+
+/****************************************/
+/* CPU Access Protect                   */
+/****************************************/
+
+#define MV64340_CPU_PROTECT_WINDOW_0_BASE_ADDR                      0x180
+#define MV64340_CPU_PROTECT_WINDOW_0_SIZE                           0x188
+#define MV64340_CPU_PROTECT_WINDOW_1_BASE_ADDR                      0x190
+#define MV64340_CPU_PROTECT_WINDOW_1_SIZE                           0x198
+#define MV64340_CPU_PROTECT_WINDOW_2_BASE_ADDR                      0x1a0
+#define MV64340_CPU_PROTECT_WINDOW_2_SIZE                           0x1a8
+#define MV64340_CPU_PROTECT_WINDOW_3_BASE_ADDR                      0x1b0
+#define MV64340_CPU_PROTECT_WINDOW_3_SIZE                           0x1b8
+
+
+/****************************************/
+/*          CPU Error Report            */
+/****************************************/
+
+#define MV64340_CPU_ERROR_ADDR_LOW                                  0x070
+#define MV64340_CPU_ERROR_ADDR_HIGH                                 0x078
+#define MV64340_CPU_ERROR_DATA_LOW                                  0x128
+#define MV64340_CPU_ERROR_DATA_HIGH                                 0x130
+#define MV64340_CPU_ERROR_PARITY                                    0x138
+#define MV64340_CPU_ERROR_CAUSE                                     0x140
+#define MV64340_CPU_ERROR_MASK                                      0x148
+
+/****************************************/
+/*      CPU Interface Debug Registers 	*/
+/****************************************/
+
+#define MV64340_PUNIT_SLAVE_DEBUG_LOW                               0x360
+#define MV64340_PUNIT_SLAVE_DEBUG_HIGH                              0x368
+#define MV64340_PUNIT_MASTER_DEBUG_LOW                              0x370
+#define MV64340_PUNIT_MASTER_DEBUG_HIGH                             0x378
+#define MV64340_PUNIT_MMASK                                         0x3e4
+
+/****************************************/
+/*  Integrated SRAM Registers           */
+/****************************************/
+
+#define MV64340_SRAM_CONFIG                                         0x380
+#define MV64340_SRAM_TEST_MODE                                      0X3F4
+#define MV64340_SRAM_ERROR_CAUSE                                    0x388
+#define MV64340_SRAM_ERROR_ADDR                                     0x390
+#define MV64340_SRAM_ERROR_ADDR_HIGH                                0X3F8
+#define MV64340_SRAM_ERROR_DATA_LOW                                 0x398
+#define MV64340_SRAM_ERROR_DATA_HIGH                                0x3a0
+#define MV64340_SRAM_ERROR_DATA_PARITY                              0x3a8
+
+/****************************************/
+/* SDRAM Configuration                  */
+/****************************************/
+
+#define MV64340_SDRAM_CONFIG                                        0x1400
+#define MV64340_D_UNIT_CONTROL_LOW                                  0x1404
+#define MV64340_D_UNIT_CONTROL_HIGH                                 0x1424
+#define MV64340_SDRAM_TIMING_CONTROL_LOW                            0x1408
+#define MV64340_SDRAM_TIMING_CONTROL_HIGH                           0x140c
+#define MV64340_SDRAM_ADDR_CONTROL                                  0x1410
+#define MV64340_SDRAM_OPEN_PAGES_CONTROL                            0x1414
+#define MV64340_SDRAM_OPERATION                                     0x1418
+#define MV64340_SDRAM_MODE                                          0x141c
+#define MV64340_EXTENDED_DRAM_MODE                                  0x1420
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_LOW                         0x1430
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_HIGH                        0x1434
+#define MV64340_SDRAM_CROSS_BAR_TIMEOUT                             0x1438
+#define MV64340_SDRAM_ADDR_CTRL_PADS_CALIBRATION                    0x14c0
+#define MV64340_SDRAM_DATA_PADS_CALIBRATION                         0x14c4
+
+/****************************************/
+/* SDRAM Error Report                   */
+/****************************************/
+
+#define MV64340_SDRAM_ERROR_DATA_LOW                                0x1444
+#define MV64340_SDRAM_ERROR_DATA_HIGH                               0x1440
+#define MV64340_SDRAM_ERROR_ADDR                                    0x1450
+#define MV64340_SDRAM_RECEIVED_ECC                                  0x1448
+#define MV64340_SDRAM_CALCULATED_ECC                                0x144c
+#define MV64340_SDRAM_ECC_CONTROL                                   0x1454
+#define MV64340_SDRAM_ECC_ERROR_COUNTER                             0x1458
+
+/******************************************/
+/*  Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64340_DFCDL_CONFIG0                                       0x1480
+#define MV64340_DFCDL_CONFIG1                                       0x1484
+#define MV64340_DLL_WRITE                                           0x1488
+#define MV64340_DLL_READ                                            0x148c
+#define MV64340_SRAM_ADDR                                           0x1490
+#define MV64340_SRAM_DATA0                                          0x1494
+#define MV64340_SRAM_DATA1                                          0x1498
+#define MV64340_SRAM_DATA2                                          0x149c
+#define MV64340_DFCL_PROBE                                          0x14a0
+
+/******************************************/
+/*   Debug Registers                      */
+/******************************************/
+
+#define MV64340_DUNIT_DEBUG_LOW                                     0x1460
+#define MV64340_DUNIT_DEBUG_HIGH                                    0x1464
+#define MV64340_DUNIT_MMASK                                         0X1b40
+
+/****************************************/
+/* Device Parameters			*/
+/****************************************/
+
+#define MV64340_DEVICE_BANK0_PARAMETERS				    0x45c
+#define MV64340_DEVICE_BANK1_PARAMETERS				    0x460
+#define MV64340_DEVICE_BANK2_PARAMETERS				    0x464
+#define MV64340_DEVICE_BANK3_PARAMETERS				    0x468
+#define MV64340_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
+#define MV64340_DEVICE_INTERFACE_CONTROL                            0x4c0
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW              0x4c8
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH             0x4cc
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT                  0x4c4
+
+/****************************************/
+/* Device interrupt registers		*/
+/****************************************/
+
+#define MV64340_DEVICE_INTERRUPT_CAUSE				    0x4d0
+#define MV64340_DEVICE_INTERRUPT_MASK				    0x4d4
+#define MV64340_DEVICE_ERROR_ADDR				    0x4d8
+#define MV64340_DEVICE_ERROR_DATA   				    0x4dc
+#define MV64340_DEVICE_ERROR_PARITY     			    0x4e0
+
+/****************************************/
+/* Device debug registers   		*/
+/****************************************/
+
+#define MV64340_DEVICE_DEBUG_LOW     				    0x4e4
+#define MV64340_DEVICE_DEBUG_HIGH     				    0x4e8
+#define MV64340_RUNIT_MMASK                                         0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64340_PCI_0_CS_0_BANK_SIZE                                0xc08
+#define MV64340_PCI_1_CS_0_BANK_SIZE                                0xc88
+#define MV64340_PCI_0_CS_1_BANK_SIZE                                0xd08
+#define MV64340_PCI_1_CS_1_BANK_SIZE                                0xd88
+#define MV64340_PCI_0_CS_2_BANK_SIZE                                0xc0c
+#define MV64340_PCI_1_CS_2_BANK_SIZE                                0xc8c
+#define MV64340_PCI_0_CS_3_BANK_SIZE                                0xd0c
+#define MV64340_PCI_1_CS_3_BANK_SIZE                                0xd8c
+#define MV64340_PCI_0_DEVCS_0_BANK_SIZE                             0xc10
+#define MV64340_PCI_1_DEVCS_0_BANK_SIZE                             0xc90
+#define MV64340_PCI_0_DEVCS_1_BANK_SIZE                             0xd10
+#define MV64340_PCI_1_DEVCS_1_BANK_SIZE                             0xd90
+#define MV64340_PCI_0_DEVCS_2_BANK_SIZE                             0xd18
+#define MV64340_PCI_1_DEVCS_2_BANK_SIZE                             0xd98
+#define MV64340_PCI_0_DEVCS_3_BANK_SIZE                             0xc14
+#define MV64340_PCI_1_DEVCS_3_BANK_SIZE                             0xc94
+#define MV64340_PCI_0_DEVCS_BOOT_BANK_SIZE                          0xd14
+#define MV64340_PCI_1_DEVCS_BOOT_BANK_SIZE                          0xd94
+#define MV64340_PCI_0_P2P_MEM0_BAR_SIZE                             0xd1c
+#define MV64340_PCI_1_P2P_MEM0_BAR_SIZE                             0xd9c
+#define MV64340_PCI_0_P2P_MEM1_BAR_SIZE                             0xd20
+#define MV64340_PCI_1_P2P_MEM1_BAR_SIZE                             0xda0
+#define MV64340_PCI_0_P2P_I_O_BAR_SIZE                              0xd24
+#define MV64340_PCI_1_P2P_I_O_BAR_SIZE                              0xda4
+#define MV64340_PCI_0_CPU_BAR_SIZE                                  0xd28
+#define MV64340_PCI_1_CPU_BAR_SIZE                                  0xda8
+#define MV64340_PCI_0_INTERNAL_SRAM_BAR_SIZE                        0xe00
+#define MV64340_PCI_1_INTERNAL_SRAM_BAR_SIZE                        0xe80
+#define MV64340_PCI_0_EXPANSION_ROM_BAR_SIZE                        0xd2c
+#define MV64340_PCI_1_EXPANSION_ROM_BAR_SIZE                        0xd9c
+#define MV64340_PCI_0_BASE_ADDR_REG_ENABLE                          0xc3c
+#define MV64340_PCI_1_BASE_ADDR_REG_ENABLE                          0xcbc
+#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
+#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
+#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
+#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
+#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
+#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
+#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
+#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
+#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
+#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
+#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
+#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
+#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
+#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
+#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
+#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
+#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
+#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
+#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
+#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
+#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
+#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
+#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP           	    0xc54
+#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP           	    0xcd4
+#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xd54
+#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xdd4
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xd5c
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xddc
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xd60
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xde0
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xd64
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xde4
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xd68
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xde8
+#define MV64340_PCI_0_P2P_I_O_BASE_ADDR_REMAP                       0xd6c
+#define MV64340_PCI_1_P2P_I_O_BASE_ADDR_REMAP                       0xdec 
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_LOW                       0xd70
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_LOW                       0xdf0
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_HIGH                      0xd74
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_HIGH                      0xdf4
+#define MV64340_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf00
+#define MV64340_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf80
+#define MV64340_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP                 0xf38
+#define MV64340_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP                 0xfb8
+#define MV64340_PCI_0_ADDR_DECODE_CONTROL                           0xd3c
+#define MV64340_PCI_1_ADDR_DECODE_CONTROL                           0xdbc
+#define MV64340_PCI_0_HEADERS_RETARGET_CONTROL                      0xF40
+#define MV64340_PCI_1_HEADERS_RETARGET_CONTROL                      0xFc0
+#define MV64340_PCI_0_HEADERS_RETARGET_BASE                         0xF44
+#define MV64340_PCI_1_HEADERS_RETARGET_BASE                         0xFc4
+#define MV64340_PCI_0_HEADERS_RETARGET_HIGH                         0xF48
+#define MV64340_PCI_1_HEADERS_RETARGET_HIGH                         0xFc8
+
+/***********************************/
+/*   PCI Control Register Map      */
+/***********************************/
+
+#define MV64340_PCI_0_DLL_STATUS_AND_COMMAND                        0x1d20
+#define MV64340_PCI_1_DLL_STATUS_AND_COMMAND                        0x1da0
+#define MV64340_PCI_0_MPP_PADS_DRIVE_CONTROL                        0x1d1C
+#define MV64340_PCI_1_MPP_PADS_DRIVE_CONTROL                        0x1d9C
+#define MV64340_PCI_0_COMMAND			         	    0xc00
+#define MV64340_PCI_1_COMMAND					    0xc80
+#define MV64340_PCI_0_MODE                                          0xd00
+#define MV64340_PCI_1_MODE                                          0xd80
+#define MV64340_PCI_0_RETRY	        	 		    0xc04
+#define MV64340_PCI_1_RETRY				            0xc84
+#define MV64340_PCI_0_READ_BUFFER_DISCARD_TIMER                     0xd04
+#define MV64340_PCI_1_READ_BUFFER_DISCARD_TIMER                     0xd84
+#define MV64340_PCI_0_MSI_TRIGGER_TIMER                             0xc38
+#define MV64340_PCI_1_MSI_TRIGGER_TIMER                             0xcb8
+#define MV64340_PCI_0_ARBITER_CONTROL                               0x1d00
+#define MV64340_PCI_1_ARBITER_CONTROL                               0x1d80
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_LOW                         0x1d08
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_LOW                         0x1d88
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_HIGH                        0x1d0c
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_HIGH                        0x1d8c
+#define MV64340_PCI_0_CROSS_BAR_TIMEOUT                             0x1d04
+#define MV64340_PCI_1_CROSS_BAR_TIMEOUT                             0x1d84
+#define MV64340_PCI_0_SYNC_BARRIER_TRIGGER_REG                      0x1D18
+#define MV64340_PCI_1_SYNC_BARRIER_TRIGGER_REG                      0x1D98
+#define MV64340_PCI_0_SYNC_BARRIER_VIRTUAL_REG                      0x1d10
+#define MV64340_PCI_1_SYNC_BARRIER_VIRTUAL_REG                      0x1d90
+#define MV64340_PCI_0_P2P_CONFIG                                    0x1d14
+#define MV64340_PCI_1_P2P_CONFIG                                    0x1d94
+
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_LOW                     0x1e00
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_HIGH                    0x1e04
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_0                         0x1e08
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_LOW                     0x1e10
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_HIGH                    0x1e14
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_1                         0x1e18
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_LOW                     0x1e20
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_HIGH                    0x1e24
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_2                         0x1e28
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_LOW                     0x1e30
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_HIGH                    0x1e34
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_3                         0x1e38
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_LOW                     0x1e40
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_HIGH                    0x1e44
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_4                         0x1e48
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_LOW                     0x1e50
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_HIGH                    0x1e54
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_5                         0x1e58
+
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_LOW                     0x1e80
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_HIGH                    0x1e84
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_0                         0x1e88
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_LOW                     0x1e90
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_HIGH                    0x1e94
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_1                         0x1e98
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_LOW                     0x1ea0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_HIGH                    0x1ea4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_2                         0x1ea8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_LOW                     0x1eb0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_HIGH                    0x1eb4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_3                         0x1eb8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_LOW                     0x1ec0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_HIGH                    0x1ec4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_4                         0x1ec8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_LOW                     0x1ed0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_HIGH                    0x1ed4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_5                         0x1ed8
+
+/****************************************/
+/*   PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64340_PCI_0_CONFIG_ADDR 				    0xcf8
+#define MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG                       0xcfc
+#define MV64340_PCI_1_CONFIG_ADDR 				    0xc78
+#define MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG                       0xc7c
+#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xc34
+#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xcb4
+
+/****************************************/
+/*   PCI Error Report Registers         */
+/****************************************/
+
+#define MV64340_PCI_0_SERR_MASK					    0xc28
+#define MV64340_PCI_1_SERR_MASK					    0xca8
+#define MV64340_PCI_0_ERROR_ADDR_LOW                                0x1d40
+#define MV64340_PCI_1_ERROR_ADDR_LOW                                0x1dc0
+#define MV64340_PCI_0_ERROR_ADDR_HIGH                               0x1d44
+#define MV64340_PCI_1_ERROR_ADDR_HIGH                               0x1dc4
+#define MV64340_PCI_0_ERROR_ATTRIBUTE                               0x1d48
+#define MV64340_PCI_1_ERROR_ATTRIBUTE                               0x1dc8
+#define MV64340_PCI_0_ERROR_COMMAND                                 0x1d50
+#define MV64340_PCI_1_ERROR_COMMAND                                 0x1dd0
+#define MV64340_PCI_0_ERROR_CAUSE                                   0x1d58
+#define MV64340_PCI_1_ERROR_CAUSE                                   0x1dd8
+#define MV64340_PCI_0_ERROR_MASK                                    0x1d5c
+#define MV64340_PCI_1_ERROR_MASK                                    0x1ddc
+
+/****************************************/
+/*   PCI Debug Registers                */
+/****************************************/
+
+#define MV64340_PCI_0_MMASK                                         0X1D24
+#define MV64340_PCI_1_MMASK                                         0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+#define MV64340_PCI_DEVICE_AND_VENDOR_ID 			    0x000
+#define MV64340_PCI_STATUS_AND_COMMAND				    0x004
+#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 	    0x00C
+
+#define MV64340_PCI_SCS_0_BASE_ADDR_LOW   	      		    0x010
+#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH   		            0x014
+#define MV64340_PCI_SCS_1_BASE_ADDR_LOW  	     	            0x018
+#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH 		            0x01C
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW      	    0x020
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH     	    0x024
+#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
+#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG	                    0x030
+#define MV64340_PCI_CAPABILTY_LIST_POINTER                          0x034
+#define MV64340_PCI_INTERRUPT_PIN_AND_LINE 			    0x03C
+       /* capability list */
+#define MV64340_PCI_POWER_MANAGEMENT_CAPABILITY                     0x040
+#define MV64340_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL             0x044
+#define MV64340_PCI_VPD_ADDR                                        0x048
+#define MV64340_PCI_VPD_DATA                                        0x04c
+#define MV64340_PCI_MSI_MESSAGE_CONTROL                             0x050
+#define MV64340_PCI_MSI_MESSAGE_ADDR                                0x054
+#define MV64340_PCI_MSI_MESSAGE_UPPER_ADDR                          0x058
+#define MV64340_PCI_MSI_MESSAGE_DATA                                0x05c
+#define MV64340_PCI_X_COMMAND                                       0x060
+#define MV64340_PCI_X_STATUS                                        0x064
+#define MV64340_PCI_COMPACT_PCI_HOT_SWAP                            0x068
+
+/***********************************************/
+/*   PCI Configuration, Function 1, Registers  */
+/***********************************************/
+
+#define MV64340_PCI_SCS_2_BASE_ADDR_LOW   			    0x110
+#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
+#define MV64340_PCI_SCS_3_BASE_ADDR_LOW 			    0x118
+#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW          	    0x120
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH         	    0x124
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW	    		    0x210
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH 			    0x214
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW 			    0x218
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH      		    0x21c
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW 			    0x220
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH      		    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW	    		    0x310
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH 			    0x314
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH      		    0x31c
+#define MV64340_PCI_CPU_BASE_ADDR_LOW 				    0x220
+#define MV64340_PCI_CPU_BASE_ADDR_HIGH      			    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW  			    0x410
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH 			    0x414
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW   			    0x418
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH 			    0x41c
+#define MV64340_PCI_P2P_I_O_BASE_ADDR                 	            0x420
+#define MV64340_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR              0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20)   	*/
+/****************************************/
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x014
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 		    0x018
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x01C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE  		    0x020
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE          0x024
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 		    0x02C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE         0x030
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE          0x034
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE       0x040
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE      0x044
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 		    0x050
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 		    0x054
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE        0x060
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE        0x064
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE        0x068
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE        0x06C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE       0x070
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE       0x074
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE       0x0F8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE       0x0FC
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x094
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 		    0x098
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x09C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE  		    0x0A0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE          0x0A4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 		    0x0AC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE         0x0B0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE          0x0B4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE       0x0C0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE      0x0C4
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 		    0x0D0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 		    0x0D4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE        0x0E0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE        0x0E4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE        0x0E8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE        0x0EC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE       0x0F0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE       0x0F4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE       0x078
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE       0x07C
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C14
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 		    0x1C18
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C1C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE  		    0x1C20
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE  	    0x1C24
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 		    0x1C2C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE          0x1C30
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE           0x1C34
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE        0x1C40
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE       0x1C44
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 		    0x1C50
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 		    0x1C54
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE         0x1C60
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE         0x1C64
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE         0x1C68
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE         0x1C6C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE        0x1C70
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE        0x1C74
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE        0x1CF8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE        0x1CFC
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C94
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 		    0x1C98
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C9C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE  		    0x1CA0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE  	    0x1CA4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 		    0x1CAC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE          0x1CB0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE           0x1CB4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE        0x1CC0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE       0x1CC4
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 		    0x1CD0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 		    0x1CD4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE         0x1CE0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE         0x1CE4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE         0x1CE8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE         0x1CEC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE        0x1CF0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE        0x1CF4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE        0x1C78
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE        0x1C7C
+
+/****************************************/
+/*        Ethernet Unit Registers  		*/
+/****************************************/
+
+#define MV643XX_ETH_SHARED_REGS                                     0x2000
+#define MV643XX_ETH_SHARED_REGS_SIZE                                0x2000
+
+#define MV643XX_ETH_PHY_ADDR_REG                                    0x2000
+#define MV643XX_ETH_SMI_REG                                         0x2004
+#define MV643XX_ETH_UNIT_DEFAULT_ADDR_REG                           0x2008
+#define MV643XX_ETH_UNIT_DEFAULTID_REG                              0x200c
+#define MV643XX_ETH_UNIT_INTERRUPT_CAUSE_REG                        0x2080
+#define MV643XX_ETH_UNIT_INTERRUPT_MASK_REG                         0x2084
+#define MV643XX_ETH_UNIT_INTERNAL_USE_REG                           0x24fc
+#define MV643XX_ETH_UNIT_ERROR_ADDR_REG                             0x2094
+#define MV643XX_ETH_BAR_0                                           0x2200
+#define MV643XX_ETH_BAR_1                                           0x2208
+#define MV643XX_ETH_BAR_2                                           0x2210
+#define MV643XX_ETH_BAR_3                                           0x2218
+#define MV643XX_ETH_BAR_4                                           0x2220
+#define MV643XX_ETH_BAR_5                                           0x2228
+#define MV643XX_ETH_SIZE_REG_0                                      0x2204
+#define MV643XX_ETH_SIZE_REG_1                                      0x220c
+#define MV643XX_ETH_SIZE_REG_2                                      0x2214
+#define MV643XX_ETH_SIZE_REG_3                                      0x221c
+#define MV643XX_ETH_SIZE_REG_4                                      0x2224
+#define MV643XX_ETH_SIZE_REG_5                                      0x222c
+#define MV643XX_ETH_HEADERS_RETARGET_BASE_REG                       0x2230
+#define MV643XX_ETH_HEADERS_RETARGET_CONTROL_REG                    0x2234
+#define MV643XX_ETH_HIGH_ADDR_REMAP_REG_0                           0x2280
+#define MV643XX_ETH_HIGH_ADDR_REMAP_REG_1                           0x2284
+#define MV643XX_ETH_HIGH_ADDR_REMAP_REG_2                           0x2288
+#define MV643XX_ETH_HIGH_ADDR_REMAP_REG_3                           0x228c
+#define MV643XX_ETH_BASE_ADDR_ENABLE_REG                            0x2290
+#define MV643XX_ETH_ACCESS_PROTECTION_REG(port)                    (0x2294 + (port<<2))
+#define MV643XX_ETH_MIB_COUNTERS_BASE(port)                        (0x3000 + (port<<7))
+#define MV643XX_ETH_PORT_CONFIG_REG(port)                          (0x2400 + (port<<10))
+#define MV643XX_ETH_PORT_CONFIG_EXTEND_REG(port)                   (0x2404 + (port<<10))
+#define MV643XX_ETH_MII_SERIAL_PARAMETRS_REG(port)                 (0x2408 + (port<<10))
+#define MV643XX_ETH_GMII_SERIAL_PARAMETRS_REG(port)                (0x240c + (port<<10))
+#define MV643XX_ETH_VLAN_ETHERTYPE_REG(port)                       (0x2410 + (port<<10))
+#define MV643XX_ETH_MAC_ADDR_LOW(port)                             (0x2414 + (port<<10))
+#define MV643XX_ETH_MAC_ADDR_HIGH(port)                            (0x2418 + (port<<10))
+#define MV643XX_ETH_SDMA_CONFIG_REG(port)                          (0x241c + (port<<10))
+#define MV643XX_ETH_DSCP_0(port)                                   (0x2420 + (port<<10))
+#define MV643XX_ETH_DSCP_1(port)                                   (0x2424 + (port<<10))
+#define MV643XX_ETH_DSCP_2(port)                                   (0x2428 + (port<<10))
+#define MV643XX_ETH_DSCP_3(port)                                   (0x242c + (port<<10))
+#define MV643XX_ETH_DSCP_4(port)                                   (0x2430 + (port<<10))
+#define MV643XX_ETH_DSCP_5(port)                                   (0x2434 + (port<<10))
+#define MV643XX_ETH_DSCP_6(port)                                   (0x2438 + (port<<10))
+#define MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port)                  (0x243c + (port<<10))
+#define MV643XX_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)            (0x2440 + (port<<10))
+#define MV643XX_ETH_PORT_STATUS_REG(port)                          (0x2444 + (port<<10))
+#define MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)               (0x2448 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_FIXED_PRIORITY(port)                  (0x244c + (port<<10))
+#define MV643XX_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)         (0x2450 + (port<<10))
+#define MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port)                    (0x2458 + (port<<10))
+#define MV643XX_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)           (0x245c + (port<<10))
+#define MV643XX_ETH_INTERRUPT_CAUSE_REG(port)                      (0x2460 + (port<<10))
+#define MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)               (0x2464 + (port<<10))
+#define MV643XX_ETH_INTERRUPT_MASK_REG(port)                       (0x2468 + (port<<10))
+#define MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port)                (0x246c + (port<<10))
+#define MV643XX_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)             (0x2470 + (port<<10))
+#define MV643XX_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)             (0x2474 + (port<<10))
+#define MV643XX_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)                (0x247c + (port<<10))
+#define MV643XX_ETH_RX_DISCARDED_FRAMES_COUNTER(port)              (0x2484 + (port<<10)
+#define MV643XX_ETH_PORT_DEBUG_0_REG(port)                         (0x248c + (port<<10))
+#define MV643XX_ETH_PORT_DEBUG_1_REG(port)                         (0x2490 + (port<<10))
+#define MV643XX_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)             (0x2494 + (port<<10))
+#define MV643XX_ETH_INTERNAL_USE_REG(port)                         (0x24fc + (port<<10))
+#define MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port)                (0x2680 + (port<<10))
+#define MV643XX_ETH_CURRENT_SERVED_TX_DESC_PTR(port)               (0x2684 + (port<<10))      
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)              (0x260c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)              (0x261c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)              (0x262c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)              (0x263c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)              (0x264c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)              (0x265c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)              (0x266c + (port<<10))     
+#define MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)              (0x267c + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)              (0x26c0 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)              (0x26c4 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)              (0x26c8 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)              (0x26cc + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)              (0x26d0 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)              (0x26d4 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)              (0x26d8 + (port<<10))     
+#define MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)              (0x26dc + (port<<10))     
+#define MV643XX_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)            (0x2700 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)            (0x2710 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)            (0x2720 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)            (0x2730 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)            (0x2740 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)            (0x2750 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)            (0x2760 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)            (0x2770 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)           (0x2704 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)           (0x2714 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)           (0x2724 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)           (0x2734 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)           (0x2744 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)           (0x2754 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)           (0x2764 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)           (0x2774 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)                (0x2708 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)                (0x2718 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)                (0x2728 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)                (0x2738 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)                (0x2748 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)                (0x2758 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)                (0x2768 + (port<<10))
+#define MV643XX_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)                (0x2778 + (port<<10))
+#define MV643XX_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)               (0x2780 + (port<<10))
+#define MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
+#define MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)     (0x3500 + (port<<10))
+#define MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)             (0x3600 + (port<<10))
+
+/*******************************************/
+/*          CUNIT  Registers               */
+/*******************************************/
+
+         /* Address Decoding Register Map */
+           
+#define MV64340_CUNIT_BASE_ADDR_REG0                                0xf200
+#define MV64340_CUNIT_BASE_ADDR_REG1                                0xf208
+#define MV64340_CUNIT_BASE_ADDR_REG2                                0xf210
+#define MV64340_CUNIT_BASE_ADDR_REG3                                0xf218
+#define MV64340_CUNIT_SIZE0                                         0xf204
+#define MV64340_CUNIT_SIZE1                                         0xf20c
+#define MV64340_CUNIT_SIZE2                                         0xf214
+#define MV64340_CUNIT_SIZE3                                         0xf21c
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG0                          0xf240
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG1                          0xf244
+#define MV64340_CUNIT_BASE_ADDR_ENABLE_REG                          0xf250
+#define MV64340_MPSC0_ACCESS_PROTECTION_REG                         0xf254
+#define MV64340_MPSC1_ACCESS_PROTECTION_REG                         0xf258
+#define MV64340_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG                  0xf25C
+
+        /*  Error Report Registers  */
+
+#define MV64340_CUNIT_INTERRUPT_CAUSE_REG                           0xf310
+#define MV64340_CUNIT_INTERRUPT_MASK_REG                            0xf314
+#define MV64340_CUNIT_ERROR_ADDR                                    0xf318
+
+        /*  Cunit Control Registers */
+
+#define MV64340_CUNIT_ARBITER_CONTROL_REG                           0xf300
+#define MV64340_CUNIT_CONFIG_REG                                    0xb40c
+#define MV64340_CUNIT_CRROSBAR_TIMEOUT_REG                          0xf304
+
+        /*  Cunit Debug Registers   */
+
+#define MV64340_CUNIT_DEBUG_LOW                                     0xf340
+#define MV64340_CUNIT_DEBUG_HIGH                                    0xf344
+#define MV64340_CUNIT_MMASK                                         0xf380
+
+        /*  MPSCs Clocks Routing Registers  */
+
+#define MV64340_MPSC_ROUTING_REG                                    0xb400
+#define MV64340_MPSC_RX_CLOCK_ROUTING_REG                           0xb404
+#define MV64340_MPSC_TX_CLOCK_ROUTING_REG                           0xb408
+
+        /*  MPSCs Interrupts Registers    */
+
+#define MV64340_MPSC_CAUSE_REG(port)                               (0xb804 + (port<<3))
+#define MV64340_MPSC_MASK_REG(port)                                (0xb884 + (port<<3))
+ 
+#define MV64340_MPSC_MAIN_CONFIG_LOW(port)                         (0x8000 + (port<<12))
+#define MV64340_MPSC_MAIN_CONFIG_HIGH(port)                        (0x8004 + (port<<12))    
+#define MV64340_MPSC_PROTOCOL_CONFIG(port)                         (0x8008 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG1(port)                            (0x800c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG2(port)                            (0x8010 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG3(port)                            (0x8014 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG4(port)                            (0x8018 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG5(port)                            (0x801c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG6(port)                            (0x8020 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG7(port)                            (0x8024 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG8(port)                            (0x8028 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG9(port)                            (0x802c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG10(port)                           (0x8030 + (port<<12))    
+        
+        /*  MPSC0 Registers      */
+
+
+/***************************************/
+/*          SDMA Registers             */
+/***************************************/
+
+#define MV64340_SDMA_CONFIG_REG(channel)                        (0x4000 + (channel<<13))        
+#define MV64340_SDMA_COMMAND_REG(channel)                       (0x4008 + (channel<<13))        
+#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)     (0x4810 + (channel<<13))        
+#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)     (0x4c10 + (channel<<13))        
+#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)       (0x4c14 + (channel<<13)) 
+
+#define MV64340_SDMA_CAUSE_REG                                      0xb800
+#define MV64340_SDMA_MASK_REG                                       0xb880
+         
+/* BRG Interrupts */
+
+#define MV64340_BRG_CONFIG_REG(brg)                              (0xb200 + (brg<<3))
+#define MV64340_BRG_BAUDE_TUNING_REG(brg)                        (0xb208 + (brg<<3))
+#define MV64340_BRG_CAUSE_REG                                       0xb834
+#define MV64340_BRG_MASK_REG                                        0xb8b4
+
+/****************************************/
+/* DMA Channel Control			*/
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_CONTROL 				    0x840
+#define MV64340_DMA_CHANNEL0_CONTROL_HIGH			    0x880
+#define MV64340_DMA_CHANNEL1_CONTROL 				    0x844
+#define MV64340_DMA_CHANNEL1_CONTROL_HIGH			    0x884
+#define MV64340_DMA_CHANNEL2_CONTROL 				    0x848
+#define MV64340_DMA_CHANNEL2_CONTROL_HIGH			    0x888
+#define MV64340_DMA_CHANNEL3_CONTROL 				    0x84C
+#define MV64340_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
+
+
+/****************************************/
+/*           IDMA Registers             */
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_BYTE_COUNT                             0x800
+#define MV64340_DMA_CHANNEL1_BYTE_COUNT                             0x804
+#define MV64340_DMA_CHANNEL2_BYTE_COUNT                             0x808
+#define MV64340_DMA_CHANNEL3_BYTE_COUNT                             0x80C
+#define MV64340_DMA_CHANNEL0_SOURCE_ADDR                            0x810
+#define MV64340_DMA_CHANNEL1_SOURCE_ADDR                            0x814
+#define MV64340_DMA_CHANNEL2_SOURCE_ADDR                            0x818
+#define MV64340_DMA_CHANNEL3_SOURCE_ADDR                            0x81c
+#define MV64340_DMA_CHANNEL0_DESTINATION_ADDR                       0x820
+#define MV64340_DMA_CHANNEL1_DESTINATION_ADDR                       0x824
+#define MV64340_DMA_CHANNEL2_DESTINATION_ADDR                       0x828
+#define MV64340_DMA_CHANNEL3_DESTINATION_ADDR                       0x82C
+#define MV64340_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER                0x830
+#define MV64340_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER                0x834
+#define MV64340_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER                0x838
+#define MV64340_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER                0x83C
+#define MV64340_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER             0x870
+#define MV64340_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER             0x874
+#define MV64340_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER             0x878
+#define MV64340_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER             0x87C
+
+ /*  IDMA Address Decoding Base Address Registers  */
+ 
+#define MV64340_DMA_BASE_ADDR_REG0                                  0xa00
+#define MV64340_DMA_BASE_ADDR_REG1                                  0xa08
+#define MV64340_DMA_BASE_ADDR_REG2                                  0xa10
+#define MV64340_DMA_BASE_ADDR_REG3                                  0xa18
+#define MV64340_DMA_BASE_ADDR_REG4                                  0xa20
+#define MV64340_DMA_BASE_ADDR_REG5                                  0xa28
+#define MV64340_DMA_BASE_ADDR_REG6                                  0xa30
+#define MV64340_DMA_BASE_ADDR_REG7                                  0xa38
+ 
+ /*  IDMA Address Decoding Size Address Register   */
+ 
+#define MV64340_DMA_SIZE_REG0                                       0xa04
+#define MV64340_DMA_SIZE_REG1                                       0xa0c
+#define MV64340_DMA_SIZE_REG2                                       0xa14
+#define MV64340_DMA_SIZE_REG3                                       0xa1c
+#define MV64340_DMA_SIZE_REG4                                       0xa24
+#define MV64340_DMA_SIZE_REG5                                       0xa2c
+#define MV64340_DMA_SIZE_REG6                                       0xa34
+#define MV64340_DMA_SIZE_REG7                                       0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access 
+                  Protection Registers                    */
+                  
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG0                            0xa60
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG1                            0xa64
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG2                            0xa68
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG3                            0xa6C
+#define MV64340_DMA_BASE_ADDR_ENABLE_REG                            0xa80
+#define MV64340_DMA_CHANNEL0_ACCESS_PROTECTION_REG                  0xa70
+#define MV64340_DMA_CHANNEL1_ACCESS_PROTECTION_REG                  0xa74
+#define MV64340_DMA_CHANNEL2_ACCESS_PROTECTION_REG                  0xa78
+#define MV64340_DMA_CHANNEL3_ACCESS_PROTECTION_REG                  0xa7c
+#define MV64340_DMA_ARBITER_CONTROL                                 0x860
+#define MV64340_DMA_CROSS_BAR_TIMEOUT                               0x8d0
+
+ /*  IDMA Headers Retarget Registers   */
+
+#define MV64340_DMA_HEADERS_RETARGET_CONTROL                        0xa84
+#define MV64340_DMA_HEADERS_RETARGET_BASE                           0xa88
+
+ /*  IDMA Interrupt Register  */
+
+#define MV64340_DMA_INTERRUPT_CAUSE_REG                             0x8c0
+#define MV64340_DMA_INTERRUPT_CAUSE_MASK                            0x8c4
+#define MV64340_DMA_ERROR_ADDR                                      0x8c8
+#define MV64340_DMA_ERROR_SELECT                                    0x8cc
+
+ /*  IDMA Debug Register ( for internal use )    */
+
+#define MV64340_DMA_DEBUG_LOW                                       0x8e0
+#define MV64340_DMA_DEBUG_HIGH                                      0x8e4
+#define MV64340_DMA_SPARE                                           0xA8C
+
+/****************************************/
+/* Timer_Counter 			*/
+/****************************************/
+
+#define MV64340_TIMER_COUNTER0					    0x850
+#define MV64340_TIMER_COUNTER1					    0x854
+#define MV64340_TIMER_COUNTER2					    0x858
+#define MV64340_TIMER_COUNTER3					    0x85C
+#define MV64340_TIMER_COUNTER_0_3_CONTROL			    0x864
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK      		    0x86c
+
+/****************************************/
+/*         Watchdog registers  	        */
+/****************************************/
+
+#define MV64340_WATCHDOG_CONFIG_REG                                 0xb410
+#define MV64340_WATCHDOG_VALUE_REG                                  0xb414
+
+/****************************************/
+/* I2C Registers                        */
+/****************************************/
+
+#define MV64XXX_I2C_CTLR_NAME					"mv64xxx i2c"
+#define MV64XXX_I2C_OFFSET                                          0xc000
+#define MV64XXX_I2C_REG_BLOCK_SIZE                                  0x0020
+
+/****************************************/
+/* GPP Interface Registers              */
+/****************************************/
+
+#define MV64340_GPP_IO_CONTROL                                      0xf100
+#define MV64340_GPP_LEVEL_CONTROL                                   0xf110
+#define MV64340_GPP_VALUE                                           0xf104
+#define MV64340_GPP_INTERRUPT_CAUSE                                 0xf108
+#define MV64340_GPP_INTERRUPT_MASK0                                 0xf10c
+#define MV64340_GPP_INTERRUPT_MASK1                                 0xf114
+#define MV64340_GPP_VALUE_SET                                       0xf118
+#define MV64340_GPP_VALUE_CLEAR                                     0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers       */
+/****************************************/
+
+/****************************************/
+/* Interrupts	  			*/
+/****************************************/
+
+#define MV64340_MAIN_INTERRUPT_CAUSE_LOW                            0x004
+#define MV64340_MAIN_INTERRUPT_CAUSE_HIGH                           0x00c
+#define MV64340_CPU_INTERRUPT0_MASK_LOW                             0x014
+#define MV64340_CPU_INTERRUPT0_MASK_HIGH                            0x01c
+#define MV64340_CPU_INTERRUPT0_SELECT_CAUSE                         0x024
+#define MV64340_CPU_INTERRUPT1_MASK_LOW                             0x034
+#define MV64340_CPU_INTERRUPT1_MASK_HIGH                            0x03c
+#define MV64340_CPU_INTERRUPT1_SELECT_CAUSE                         0x044
+#define MV64340_INTERRUPT0_MASK_0_LOW                               0x054
+#define MV64340_INTERRUPT0_MASK_0_HIGH                              0x05c
+#define MV64340_INTERRUPT0_SELECT_CAUSE                             0x064
+#define MV64340_INTERRUPT1_MASK_0_LOW                               0x074
+#define MV64340_INTERRUPT1_MASK_0_HIGH                              0x07c
+#define MV64340_INTERRUPT1_SELECT_CAUSE                             0x084
+
+/****************************************/
+/*      MPP Interface Registers         */
+/****************************************/
+
+#define MV64340_MPP_CONTROL0                                        0xf000
+#define MV64340_MPP_CONTROL1                                        0xf004
+#define MV64340_MPP_CONTROL2                                        0xf008
+#define MV64340_MPP_CONTROL3                                        0xf00c
+
+/****************************************/
+/*    Serial Initialization registers   */
+/****************************************/
+
+#define MV64340_SERIAL_INIT_LAST_DATA                               0xf324
+#define MV64340_SERIAL_INIT_CONTROL                                 0xf328
+#define MV64340_SERIAL_INIT_STATUS                                  0xf32c
+
+extern void mv64340_irq_init(unsigned int base);
+
+/* MPSC Platform Device, Driver Data (Shared register regions) */
+#define	MPSC_SHARED_NAME		"mpsc_shared"
+
+#define	MPSC_ROUTING_BASE_ORDER		0
+#define	MPSC_SDMA_INTR_BASE_ORDER	1
+
+#define MPSC_ROUTING_REG_BLOCK_SIZE	0x000c
+#define MPSC_SDMA_INTR_REG_BLOCK_SIZE	0x0084
+
+struct mpsc_shared_pdata {
+	u32	mrr_val;
+	u32	rcrr_val;
+	u32	tcrr_val;
+	u32	intr_cause_val;
+	u32	intr_mask_val;
+};
+
+/* MPSC Platform Device, Driver Data */
+#define	MPSC_CTLR_NAME			"mpsc"
+
+#define	MPSC_BASE_ORDER			0
+#define	MPSC_SDMA_BASE_ORDER		1
+#define	MPSC_BRG_BASE_ORDER		2
+
+#define MPSC_REG_BLOCK_SIZE		0x0038
+#define MPSC_SDMA_REG_BLOCK_SIZE	0x0c18
+#define MPSC_BRG_REG_BLOCK_SIZE		0x0008
+
+struct mpsc_pdata {
+	u8	mirror_regs;
+	u8	cache_mgmt;
+	u8	max_idle;
+	int	default_baud;
+	int	default_bits;
+	int	default_parity;
+	int	default_flow;
+	u32	chr_1_val;
+	u32	chr_2_val;
+	u32	chr_10_val;
+	u32	mpcr_val;
+	u32	bcr_val;
+	u8	brg_can_tune;
+	u8	brg_clk_src;
+	u32	brg_clk_freq;
+};
+
+/* i2c Platform Device, Driver Data */
+struct mv64xxx_i2c_pdata {
+	u32	freq_m;
+	u32	freq_n;
+	u32	timeout;	/* In milliseconds */
+	u32	retries;
+};
+
+/* These macros describe Ethernet Port configuration reg (Px_cR) bits */
+#define MV643XX_ETH_UNICAST_NORMAL_MODE		0
+#define MV643XX_ETH_UNICAST_PROMISCUOUS_MODE	(1<<0)
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_0		0
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_1		(1<<1)
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_2		(1<<2)
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_3		((1<<2) | (1<<1))
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_4		(1<<3)
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_5		((1<<3) | (1<<1))
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_6		((1<<3) | (1<<2))
+#define MV643XX_ETH_DEFAULT_RX_QUEUE_7		((1<<3) | (1<<2) | (1<<1))
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_0	0
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_1	(1<<4)
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_2	(1<<5)
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_3	((1<<5) | (1<<4))
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_4	(1<<6)
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_5	((1<<6) | (1<<4))
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_6	((1<<6) | (1<<5))
+#define MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_7	((1<<6) | (1<<5) | (1<<4))
+#define MV643XX_ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	0
+#define MV643XX_ETH_REJECT_BC_IF_NOT_IP_OR_ARP	(1<<7)
+#define MV643XX_ETH_RECEIVE_BC_IF_IP		0
+#define MV643XX_ETH_REJECT_BC_IF_IP		(1<<8)
+#define MV643XX_ETH_RECEIVE_BC_IF_ARP		0
+#define MV643XX_ETH_REJECT_BC_IF_ARP		(1<<9)
+#define MV643XX_ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY (1<<12)
+#define MV643XX_ETH_CAPTURE_TCP_FRAMES_DIS	0
+#define MV643XX_ETH_CAPTURE_TCP_FRAMES_EN	(1<<14)
+#define MV643XX_ETH_CAPTURE_UDP_FRAMES_DIS	0
+#define MV643XX_ETH_CAPTURE_UDP_FRAMES_EN	(1<<15)
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_0	0
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_1	(1<<16)
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_2	(1<<17)
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_3	((1<<17) | (1<<16))
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_4	(1<<18)
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_5	((1<<18) | (1<<16))
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_6	((1<<18) | (1<<17))
+#define MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_7	((1<<18) | (1<<17) | (1<<16))
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_0	0
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_1	(1<<19)
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_2	(1<<20)
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_3	((1<<20) | (1<<19))
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_4	((1<<21)
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_5	((1<<21) | (1<<19))
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_6	((1<<21) | (1<<20))
+#define MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_7	((1<<21) | (1<<20) | (1<<19))
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_0	0
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_1	(1<<22)
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_2	(1<<23)
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_3	((1<<23) | (1<<22))
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_4	(1<<24)
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_5	((1<<24) | (1<<22))
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_6	((1<<24) | (1<<23))
+#define MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_7	((1<<24) | (1<<23) | (1<<22))
+
+#define	MV643XX_ETH_PORT_CONFIG_DEFAULT_VALUE			\
+		MV643XX_ETH_UNICAST_NORMAL_MODE		|	\
+		MV643XX_ETH_DEFAULT_RX_QUEUE_0		|	\
+		MV643XX_ETH_DEFAULT_RX_ARP_QUEUE_0	|	\
+		MV643XX_ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|	\
+		MV643XX_ETH_RECEIVE_BC_IF_IP		|	\
+		MV643XX_ETH_RECEIVE_BC_IF_ARP		|	\
+		MV643XX_ETH_CAPTURE_TCP_FRAMES_DIS	|	\
+		MV643XX_ETH_CAPTURE_UDP_FRAMES_DIS	|	\
+		MV643XX_ETH_DEFAULT_RX_TCP_QUEUE_0	|	\
+		MV643XX_ETH_DEFAULT_RX_UDP_QUEUE_0	|	\
+		MV643XX_ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+/* These macros describe Ethernet Port configuration extend reg (Px_cXR) bits*/
+#define MV643XX_ETH_CLASSIFY_EN				(1<<0)
+#define MV643XX_ETH_SPAN_BPDU_PACKETS_AS_NORMAL		0
+#define MV643XX_ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7	(1<<1)
+#define MV643XX_ETH_PARTITION_DISABLE			0
+#define MV643XX_ETH_PARTITION_ENABLE			(1<<2)
+
+#define	MV643XX_ETH_PORT_CONFIG_EXTEND_DEFAULT_VALUE		\
+		MV643XX_ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|	\
+		MV643XX_ETH_PARTITION_DISABLE
+
+/* These macros describe Ethernet Port Sdma configuration reg (SDCR) bits */
+#define MV643XX_ETH_RIFB			(1<<0)
+#define MV643XX_ETH_RX_BURST_SIZE_1_64BIT		0
+#define MV643XX_ETH_RX_BURST_SIZE_2_64BIT		(1<<1)
+#define MV643XX_ETH_RX_BURST_SIZE_4_64BIT		(1<<2)
+#define MV643XX_ETH_RX_BURST_SIZE_8_64BIT		((1<<2) | (1<<1))
+#define MV643XX_ETH_RX_BURST_SIZE_16_64BIT		(1<<3)
+#define MV643XX_ETH_BLM_RX_NO_SWAP			(1<<4)
+#define MV643XX_ETH_BLM_RX_BYTE_SWAP			0
+#define MV643XX_ETH_BLM_TX_NO_SWAP			(1<<5)
+#define MV643XX_ETH_BLM_TX_BYTE_SWAP			0
+#define MV643XX_ETH_DESCRIPTORS_BYTE_SWAP		(1<<6)
+#define MV643XX_ETH_DESCRIPTORS_NO_SWAP			0
+#define MV643XX_ETH_TX_BURST_SIZE_1_64BIT		0
+#define MV643XX_ETH_TX_BURST_SIZE_2_64BIT		(1<<22)
+#define MV643XX_ETH_TX_BURST_SIZE_4_64BIT		(1<<23)
+#define MV643XX_ETH_TX_BURST_SIZE_8_64BIT		((1<<23) | (1<<22))
+#define MV643XX_ETH_TX_BURST_SIZE_16_64BIT		(1<<24)
+
+#define	MV643XX_ETH_IPG_INT_RX(value) ((value & 0x3fff) << 8)
+
+#define	MV643XX_ETH_PORT_SDMA_CONFIG_DEFAULT_VALUE		\
+		MV643XX_ETH_RX_BURST_SIZE_4_64BIT	|	\
+		MV643XX_ETH_IPG_INT_RX(0)		|	\
+		MV643XX_ETH_TX_BURST_SIZE_4_64BIT
+
+/* These macros describe Ethernet Port serial control reg (PSCR) bits */
+#define MV643XX_ETH_SERIAL_PORT_DISABLE			0
+#define MV643XX_ETH_SERIAL_PORT_ENABLE			(1<<0)
+#define MV643XX_ETH_FORCE_LINK_PASS			(1<<1)
+#define MV643XX_ETH_DO_NOT_FORCE_LINK_PASS		0
+#define MV643XX_ETH_ENABLE_AUTO_NEG_FOR_DUPLX		0
+#define MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX		(1<<2)
+#define MV643XX_ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL	0
+#define MV643XX_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	(1<<3)
+#define MV643XX_ETH_ADV_NO_FLOW_CTRL			0
+#define MV643XX_ETH_ADV_SYMMETRIC_FLOW_CTRL		(1<<4)
+#define MV643XX_ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	0
+#define MV643XX_ETH_FORCE_FC_MODE_TX_PAUSE_DIS		(1<<5)
+#define MV643XX_ETH_FORCE_BP_MODE_NO_JAM		0
+#define MV643XX_ETH_FORCE_BP_MODE_JAM_TX		(1<<7)
+#define MV643XX_ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR	(1<<8)
+#define MV643XX_ETH_FORCE_LINK_FAIL			0
+#define MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL		(1<<10)
+#define MV643XX_ETH_RETRANSMIT_16_ATTEMPTS		0
+#define MV643XX_ETH_RETRANSMIT_FOREVER			(1<<11)
+#define MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII		(1<<13)
+#define MV643XX_ETH_ENABLE_AUTO_NEG_SPEED_GMII		0
+#define MV643XX_ETH_DTE_ADV_0				0
+#define MV643XX_ETH_DTE_ADV_1				(1<<14)
+#define MV643XX_ETH_DISABLE_AUTO_NEG_BYPASS		0
+#define MV643XX_ETH_ENABLE_AUTO_NEG_BYPASS		(1<<15)
+#define MV643XX_ETH_AUTO_NEG_NO_CHANGE			0
+#define MV643XX_ETH_RESTART_AUTO_NEG			(1<<16)
+#define MV643XX_ETH_MAX_RX_PACKET_1518BYTE		0
+#define MV643XX_ETH_MAX_RX_PACKET_1522BYTE		(1<<17)
+#define MV643XX_ETH_MAX_RX_PACKET_1552BYTE		(1<<18)
+#define MV643XX_ETH_MAX_RX_PACKET_9022BYTE		((1<<18) | (1<<17))
+#define MV643XX_ETH_MAX_RX_PACKET_9192BYTE		(1<<19)
+#define MV643XX_ETH_MAX_RX_PACKET_9700BYTE		((1<<19) | (1<<17))
+#define MV643XX_ETH_SET_EXT_LOOPBACK			(1<<20)
+#define MV643XX_ETH_CLR_EXT_LOOPBACK			0
+#define MV643XX_ETH_SET_FULL_DUPLEX_MODE		(1<<21)
+#define MV643XX_ETH_SET_HALF_DUPLEX_MODE		0
+#define MV643XX_ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1<<22)
+#define MV643XX_ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
+#define MV643XX_ETH_SET_GMII_SPEED_TO_10_100		0
+#define MV643XX_ETH_SET_GMII_SPEED_TO_1000		(1<<23)
+#define MV643XX_ETH_SET_MII_SPEED_TO_10			0
+#define MV643XX_ETH_SET_MII_SPEED_TO_100		(1<<24)
+
+#define	MV643XX_ETH_PORT_SERIAL_CONTROL_DEFAULT_VALUE		\
+		MV643XX_ETH_DO_NOT_FORCE_LINK_PASS	|	\
+		MV643XX_ETH_ENABLE_AUTO_NEG_FOR_DUPLX	|	\
+		MV643XX_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL |	\
+		MV643XX_ETH_ADV_SYMMETRIC_FLOW_CTRL	|	\
+		MV643XX_ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX |	\
+		MV643XX_ETH_FORCE_BP_MODE_NO_JAM	|	\
+		(1<<9)	/* reserved */			|	\
+		MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL	|	\
+		MV643XX_ETH_RETRANSMIT_16_ATTEMPTS	|	\
+		MV643XX_ETH_ENABLE_AUTO_NEG_SPEED_GMII	|	\
+		MV643XX_ETH_DTE_ADV_0			|	\
+		MV643XX_ETH_DISABLE_AUTO_NEG_BYPASS	|	\
+		MV643XX_ETH_AUTO_NEG_NO_CHANGE		|	\
+		MV643XX_ETH_MAX_RX_PACKET_9700BYTE	|	\
+		MV643XX_ETH_CLR_EXT_LOOPBACK		|	\
+		MV643XX_ETH_SET_FULL_DUPLEX_MODE	|	\
+		MV643XX_ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
+
+/* These macros describe Ethernet Serial Status reg (PSR) bits */
+#define MV643XX_ETH_PORT_STATUS_MODE_10_BIT		(1<<0)
+#define MV643XX_ETH_PORT_STATUS_LINK_UP			(1<<1)
+#define MV643XX_ETH_PORT_STATUS_FULL_DUPLEX		(1<<2)
+#define MV643XX_ETH_PORT_STATUS_FLOW_CONTROL		(1<<3)
+#define MV643XX_ETH_PORT_STATUS_GMII_1000		(1<<4)
+#define MV643XX_ETH_PORT_STATUS_MII_100			(1<<5)
+/* PSR bit 6 is undocumented */
+#define MV643XX_ETH_PORT_STATUS_TX_IN_PROGRESS		(1<<7)
+#define MV643XX_ETH_PORT_STATUS_AUTONEG_BYPASSED	(1<<8)
+#define MV643XX_ETH_PORT_STATUS_PARTITION		(1<<9)
+#define MV643XX_ETH_PORT_STATUS_TX_FIFO_EMPTY		(1<<10)
+/* PSR bits 11-31 are reserved */
+
+#define	MV643XX_ETH_PORT_DEFAULT_TRANSMIT_QUEUE_SIZE	800
+#define	MV643XX_ETH_PORT_DEFAULT_RECEIVE_QUEUE_SIZE	400
+
+#define MV643XX_ETH_DESC_SIZE				64
+
+#define MV643XX_ETH_SHARED_NAME	"mv643xx_eth_shared"
+#define MV643XX_ETH_NAME	"mv643xx_eth"
+
+struct mv643xx_eth_platform_data {
+	/* 
+	 * Non-values for mac_addr, phy_addr, port_config, etc.
+	 * override the default value.  Setting the corresponding
+	 * force_* field, causes the default value to be overridden
+	 * even when zero.
+	 */
+	unsigned int	force_phy_addr:1;
+	unsigned int	force_port_config:1;
+	unsigned int	force_port_config_extend:1;
+	unsigned int	force_port_sdma_config:1;
+	unsigned int	force_port_serial_control:1;
+	int		phy_addr;
+	char		*mac_addr;	/* pointer to mac address */
+	u32		port_config;
+	u32		port_config_extend;
+	u32		port_sdma_config;
+	u32		port_serial_control;
+	u32		tx_queue_size;
+	u32		rx_queue_size;
+	u32		tx_sram_addr;
+	u32		tx_sram_size;
+	u32		rx_sram_addr;
+	u32		rx_sram_size;
+};
+
+#endif /* __ASM_MV643XX_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
new file mode 100644
index 000000000000..2352bcd31a06
--- /dev/null
+++ b/include/linux/n_r3964.h
@@ -0,0 +1,226 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * http://www.pap-philips.de
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.3  2001/03/18 13:02:24  dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2  2001/03/18 12:53:15  dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6  1998/09/30 00:40:38  dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4  1998/04/02 20:29:44  lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3  1998/02/12 18:58:43  root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2  1998/02/07 13:03:17  root
+ * ioctl read_telegram
+ *
+ * Revision 1.1  1998/02/06 19:19:43  root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef __LINUX_N_R3964_H__
+#define __LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+#include <asm/termios.h>
+
+#ifdef __KERNEL__
+/*
+ * Common ascii handshake characters:
+ */
+
+#define STX 0x02
+#define ETX 0x03
+#define DLE 0x10
+#define NAK 0x15
+
+/*
+ * Timeouts (msecs/10 msecs per timer interrupt):
+ */
+
+#define R3964_TO_QVZ 550/10
+#define R3964_TO_ZVZ 220/10
+#define R3964_TO_NO_BUF 400/10
+#define R3964_NO_TX_ROOM 100/10
+#define R3964_TO_RX_PANIC 4000/10
+#define R3964_MAX_RETRIES 5
+
+#endif
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS      0x5301
+#define R3964_SETPRIORITY         0x5302
+#define R3964_USE_BCC             0x5303
+#define R3964_READ_TELEGRAM       0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER   0
+#define R3964_SLAVE    1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK   0x0001
+#define R3964_SIG_DATA  0x0002
+#define R3964_SIG_ALL   0x000f
+#define R3964_SIG_NONE  0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+#ifdef __KERNEL__
+
+enum { R3964_IDLE, 
+	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
+	   R3964_WAIT_ZVZ_BEFORE_TX_RETRY, R3964_WAIT_FOR_TX_ACK,
+	   R3964_WAIT_FOR_RX_BUF,
+	   R3964_RECEIVING, R3964_WAIT_FOR_BCC, R3964_WAIT_FOR_RX_REPEAT
+	   };
+
+/*
+ * All open file-handles are 'clients' and are stored in a linked list:
+ */
+
+struct r3964_message;
+
+struct r3964_client_info {
+	spinlock_t     lock;
+	pid_t          pid;
+	unsigned int   sig_flags;
+
+	struct r3964_client_info *next;
+
+	struct r3964_message *first_msg;
+	struct r3964_message *last_msg;
+	struct r3964_block_header *next_block_to_read;
+	int            msg_count;
+};
+
+
+#endif
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0        /* no error. */
+#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+};
+
+#define R3964_MTU      256
+
+
+#ifdef __KERNEL__
+
+struct r3964_block_header;
+
+/* internal version of client_message: */
+struct r3964_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+	  struct r3964_block_header *block;
+	  struct r3964_message *next;
+};
+
+/*
+ * Header of received block in rx_buf/tx_buf:
+ */
+
+struct r3964_block_header 
+{
+	unsigned int length;             /* length in chars without header */
+	unsigned char *data;             /* usually data is located 
+                                        immediately behind this struct */
+	unsigned int locks;              /* only used in rx_buffer */
+	  
+    struct r3964_block_header *next;
+	struct r3964_client_info *owner;  /* =NULL in rx_buffer */
+};
+
+/*
+ * If rx_buf hasn't enough space to store R3964_MTU chars,
+ * we will reject all incoming STX-requests by sending NAK.
+ */
+
+#define RX_BUF_SIZE    4000
+#define TX_BUF_SIZE    4000
+#define R3964_MAX_BLOCKS_IN_RX_QUEUE 100
+
+#define R3964_PARITY 0x0001
+#define R3964_FRAME  0x0002
+#define R3964_OVERRUN 0x0004
+#define R3964_UNKNOWN 0x0008
+#define R3964_BREAK   0x0010
+#define R3964_CHECKSUM 0x0020
+#define R3964_ERROR  0x003f
+#define R3964_BCC   0x4000
+#define R3964_DEBUG 0x8000
+
+
+struct r3964_info {
+	spinlock_t     lock;
+	struct tty_struct *tty;
+	unsigned char priority;
+	unsigned char *rx_buf;            /* ring buffer */
+	unsigned char *tx_buf;
+
+	wait_queue_head_t read_wait;
+	//struct wait_queue *read_wait;
+
+	struct r3964_block_header *rx_first;
+	struct r3964_block_header *rx_last;
+	struct r3964_block_header *tx_first;
+	struct r3964_block_header *tx_last;
+	unsigned int tx_position;
+        unsigned int rx_position;
+	unsigned char last_rx;
+	unsigned char bcc;
+        unsigned int  blocks_in_rx_queue;
+	  
+	
+	struct r3964_client_info *firstClient;
+	unsigned int state;
+	unsigned int flags;
+
+	struct timer_list tmr;
+	int nRetry;
+};
+
+#endif	
+
+#endif
diff --git a/include/linux/namei.h b/include/linux/namei.h
new file mode 100644
index 000000000000..7db67b008cac
--- /dev/null
+++ b/include/linux/namei.h
@@ -0,0 +1,87 @@
+#ifndef _LINUX_NAMEI_H
+#define _LINUX_NAMEI_H
+
+#include <linux/linkage.h>
+
+struct vfsmount;
+
+struct open_intent {
+	int	flags;
+	int	create_mode;
+};
+
+enum { MAX_NESTED_LINKS = 5 };
+
+struct nameidata {
+	struct dentry	*dentry;
+	struct vfsmount *mnt;
+	struct qstr	last;
+	unsigned int	flags;
+	int		last_type;
+	unsigned	depth;
+	char *saved_names[MAX_NESTED_LINKS + 1];
+
+	/* Intent data */
+	union {
+		struct open_intent open;
+	} intent;
+};
+
+/*
+ * Type of the last component on LOOKUP_PARENT
+ */
+enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
+
+/*
+ * The bitmask for a lookup event:
+ *  - follow links at the end
+ *  - require a directory
+ *  - ending slashes ok even for nonexistent files
+ *  - internal "there are more path compnents" flag
+ *  - locked when lookup done with dcache_lock held
+ *  - dentry cache is untrusted; force a real lookup
+ */
+#define LOOKUP_FOLLOW		 1
+#define LOOKUP_DIRECTORY	 2
+#define LOOKUP_CONTINUE		 4
+#define LOOKUP_PARENT		16
+#define LOOKUP_NOALT		32
+#define LOOKUP_REVAL		64
+/*
+ * Intent data
+ */
+#define LOOKUP_OPEN		(0x0100)
+#define LOOKUP_CREATE		(0x0200)
+#define LOOKUP_ACCESS		(0x0400)
+
+extern int FASTCALL(__user_walk(const char __user *, unsigned, struct nameidata *));
+#define user_path_walk(name,nd) \
+	__user_walk(name, LOOKUP_FOLLOW, nd)
+#define user_path_walk_link(name,nd) \
+	__user_walk(name, 0, nd)
+extern int FASTCALL(path_lookup(const char *, unsigned, struct nameidata *));
+extern int FASTCALL(path_walk(const char *, struct nameidata *));
+extern int FASTCALL(link_path_walk(const char *, struct nameidata *));
+extern void path_release(struct nameidata *);
+extern void path_release_on_umount(struct nameidata *);
+
+extern struct dentry * lookup_one_len(const char *, struct dentry *, int);
+extern struct dentry * lookup_hash(struct qstr *, struct dentry *);
+
+extern int follow_down(struct vfsmount **, struct dentry **);
+extern int follow_up(struct vfsmount **, struct dentry **);
+
+extern struct dentry *lock_rename(struct dentry *, struct dentry *);
+extern void unlock_rename(struct dentry *, struct dentry *);
+
+static inline void nd_set_link(struct nameidata *nd, char *path)
+{
+	nd->saved_names[nd->depth] = path;
+}
+
+static inline char *nd_get_link(struct nameidata *nd)
+{
+	return nd->saved_names[nd->depth];
+}
+
+#endif /* _LINUX_NAMEI_H */
diff --git a/include/linux/namespace.h b/include/linux/namespace.h
new file mode 100644
index 000000000000..9eca1558d72f
--- /dev/null
+++ b/include/linux/namespace.h
@@ -0,0 +1,42 @@
+#ifndef _NAMESPACE_H_
+#define _NAMESPACE_H_
+#ifdef __KERNEL__
+
+#include <linux/mount.h>
+#include <linux/sched.h>
+
+struct namespace {
+	atomic_t		count;
+	struct vfsmount *	root;
+	struct list_head	list;
+	struct rw_semaphore	sem;
+};
+
+extern void umount_tree(struct vfsmount *);
+extern int copy_namespace(int, struct task_struct *);
+extern void __put_namespace(struct namespace *namespace);
+
+static inline void put_namespace(struct namespace *namespace)
+{
+	if (atomic_dec_and_test(&namespace->count))
+		__put_namespace(namespace);
+}
+
+static inline void exit_namespace(struct task_struct *p)
+{
+	struct namespace *namespace = p->namespace;
+	if (namespace) {
+		task_lock(p);
+		p->namespace = NULL;
+		task_unlock(p);
+		put_namespace(namespace);
+	}
+}
+
+static inline void get_namespace(struct namespace *namespace)
+{
+	atomic_inc(&namespace->count);
+}
+
+#endif
+#endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
new file mode 100644
index 000000000000..090e210e98f0
--- /dev/null
+++ b/include/linux/nbd.h
@@ -0,0 +1,91 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ *            Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ *            New nbd_end_request() for compatibility with new linux block
+ *            layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ *            Removed unneeded blksize_bits field from nbd_device struct.
+ *            Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ *            Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef LINUX_NBD_H
+#define LINUX_NBD_H
+
+#define NBD_SET_SOCK	_IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
+#define NBD_SET_SIZE	_IO( 0xab, 2 )
+#define NBD_DO_IT	_IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
+#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
+#define NBD_DISCONNECT  _IO( 0xab, 8 )
+
+enum {
+	NBD_CMD_READ = 0,
+	NBD_CMD_WRITE = 1,
+	NBD_CMD_DISC = 2
+};
+
+#define nbd_cmd(req) ((req)->cmd[0])
+#define MAX_NBD 128
+
+/* userspace doesn't need the nbd_device structure */
+#ifdef __KERNEL__
+
+/* values for flags field */
+#define NBD_READ_ONLY 0x0001
+#define NBD_WRITE_NOCHK 0x0002
+
+struct nbd_device {
+	int flags;
+	int harderror;		/* Code of hard error			*/
+	struct socket * sock;
+	struct file * file; 	/* If == NULL, device is not ready, yet	*/
+	int magic;
+	spinlock_t queue_lock;
+	struct list_head queue_head;/* Requests are added here...	*/
+	struct semaphore tx_lock;
+	struct gendisk *disk;
+	int blksize;
+	u64 bytesize;
+};
+
+#endif
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+	u32 magic;
+	u32 type;	/* == READ || == WRITE 	*/
+	char handle[8];
+	u64 from;
+	u32 len;
+}
+#ifdef __GNUC__
+	__attribute__ ((packed))
+#endif
+;
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+	u32 magic;
+	u32 error;		/* 0 = ok, else error	*/
+	char handle[8];		/* handle you got from request	*/
+};
+#endif
diff --git a/include/linux/ncp.h b/include/linux/ncp.h
new file mode 100644
index 000000000000..99f77876b716
--- /dev/null
+++ b/include/linux/ncp.h
@@ -0,0 +1,201 @@
+/*
+ *  ncp.h
+ *
+ *  Copyright (C) 1995 by Volker Lendecke
+ *  Modified for sparc by J.F. Chadima
+ *  Modified for __constant_ntoh by Frank A. Vorstenbosch
+ *
+ */
+
+#ifndef _LINUX_NCP_H
+#define _LINUX_NCP_H
+
+#include <linux/types.h>
+
+#define NCP_PTYPE                (0x11)
+#define NCP_PORT                 (0x0451)
+
+#define NCP_ALLOC_SLOT_REQUEST   (0x1111)
+#define NCP_REQUEST              (0x2222)
+#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
+
+struct ncp_request_header {
+	__u16 type __attribute__((packed));
+	__u8 sequence __attribute__((packed));
+	__u8 conn_low __attribute__((packed));
+	__u8 task __attribute__((packed));
+	__u8 conn_high __attribute__((packed));
+	__u8 function __attribute__((packed));
+	__u8 data[0] __attribute__((packed));
+};
+
+#define NCP_REPLY                (0x3333)
+#define NCP_WATCHDOG		 (0x3E3E)
+#define NCP_POSITIVE_ACK         (0x9999)
+
+struct ncp_reply_header {
+	__u16 type __attribute__((packed));
+	__u8 sequence __attribute__((packed));
+	__u8 conn_low __attribute__((packed));
+	__u8 task __attribute__((packed));
+	__u8 conn_high __attribute__((packed));
+	__u8 completion_code __attribute__((packed));
+	__u8 connection_state __attribute__((packed));
+	__u8 data[0] __attribute__((packed));
+};
+
+#define NCP_VOLNAME_LEN (16)
+#define NCP_NUMBER_OF_VOLUMES (256)
+struct ncp_volume_info {
+	__u32 total_blocks;
+	__u32 free_blocks;
+	__u32 purgeable_blocks;
+	__u32 not_yet_purgeable_blocks;
+	__u32 total_dir_entries;
+	__u32 available_dir_entries;
+	__u8 sectors_per_block;
+	char volume_name[NCP_VOLNAME_LEN + 1];
+};
+
+#define AR_READ      (cpu_to_le16(1))
+#define AR_WRITE     (cpu_to_le16(2))
+#define AR_EXCLUSIVE (cpu_to_le16(0x20))
+
+#define NCP_FILE_ID_LEN 6
+
+/* Defines for Name Spaces */
+#define NW_NS_DOS     0
+#define NW_NS_MAC     1
+#define NW_NS_NFS     2
+#define NW_NS_FTAM    3
+#define NW_NS_OS2     4
+
+/*  Defines for ReturnInformationMask */
+#define RIM_NAME	      (cpu_to_le32(1))
+#define RIM_SPACE_ALLOCATED   (cpu_to_le32(2))
+#define RIM_ATTRIBUTES	      (cpu_to_le32(4))
+#define RIM_DATA_SIZE	      (cpu_to_le32(8))
+#define RIM_TOTAL_SIZE	      (cpu_to_le32(0x10))
+#define RIM_EXT_ATTR_INFO     (cpu_to_le32(0x20))
+#define RIM_ARCHIVE	      (cpu_to_le32(0x40))
+#define RIM_MODIFY	      (cpu_to_le32(0x80))
+#define RIM_CREATION	      (cpu_to_le32(0x100))
+#define RIM_OWNING_NAMESPACE  (cpu_to_le32(0x200))
+#define RIM_DIRECTORY	      (cpu_to_le32(0x400))
+#define RIM_RIGHTS	      (cpu_to_le32(0x800))
+#define RIM_ALL 	      (cpu_to_le32(0xFFF))
+#define RIM_COMPRESSED_INFO   (cpu_to_le32(0x80000000))
+
+/* Defines for NSInfoBitMask */
+#define NSIBM_NFS_NAME		0x0001
+#define NSIBM_NFS_MODE		0x0002
+#define NSIBM_NFS_GID		0x0004
+#define NSIBM_NFS_NLINKS	0x0008
+#define NSIBM_NFS_RDEV		0x0010
+#define NSIBM_NFS_LINK		0x0020
+#define NSIBM_NFS_CREATED	0x0040
+#define NSIBM_NFS_UID		0x0080
+#define NSIBM_NFS_ACSFLAG	0x0100
+#define NSIBM_NFS_MYFLAG	0x0200
+
+/* open/create modes */
+#define OC_MODE_OPEN	  0x01
+#define OC_MODE_TRUNCATE  0x02
+#define OC_MODE_REPLACE   0x02
+#define OC_MODE_CREATE	  0x08
+
+/* open/create results */
+#define OC_ACTION_NONE	   0x00
+#define OC_ACTION_OPEN	   0x01
+#define OC_ACTION_CREATE   0x02
+#define OC_ACTION_TRUNCATE 0x04
+#define OC_ACTION_REPLACE  0x04
+
+/* access rights attributes */
+#ifndef AR_READ_ONLY
+#define AR_READ_ONLY	   0x0001
+#define AR_WRITE_ONLY	   0x0002
+#define AR_DENY_READ	   0x0004
+#define AR_DENY_WRITE	   0x0008
+#define AR_COMPATIBILITY   0x0010
+#define AR_WRITE_THROUGH   0x0040
+#define AR_OPEN_COMPRESSED 0x0100
+#endif
+
+struct nw_nfs_info {
+	__u32 mode;
+	__u32 rdev;
+};
+
+struct nw_info_struct {
+	__u32 spaceAlloc __attribute__((packed));
+	__le32 attributes __attribute__((packed));
+	__u16 flags __attribute__((packed));
+	__le32 dataStreamSize __attribute__((packed));
+	__le32 totalStreamSize __attribute__((packed));
+	__u16 numberOfStreams __attribute__((packed));
+	__le16 creationTime __attribute__((packed));
+	__le16 creationDate __attribute__((packed));
+	__u32 creatorID __attribute__((packed));
+	__le16 modifyTime __attribute__((packed));
+	__le16 modifyDate __attribute__((packed));
+	__u32 modifierID __attribute__((packed));
+	__le16 lastAccessDate __attribute__((packed));
+	__u16 archiveTime __attribute__((packed));
+	__u16 archiveDate __attribute__((packed));
+	__u32 archiverID __attribute__((packed));
+	__u16 inheritedRightsMask __attribute__((packed));
+	__le32 dirEntNum __attribute__((packed));
+	__le32 DosDirNum __attribute__((packed));
+	__u32 volNumber __attribute__((packed));
+	__u32 EADataSize __attribute__((packed));
+	__u32 EAKeyCount __attribute__((packed));
+	__u32 EAKeySize __attribute__((packed));
+	__u32 NSCreator __attribute__((packed));
+	__u8 nameLen __attribute__((packed));
+	__u8 entryName[256] __attribute__((packed));
+	/* libncp may depend on there being nothing after entryName */
+#ifdef __KERNEL__
+	struct nw_nfs_info nfs;
+#endif
+};
+
+/* modify mask - use with MODIFY_DOS_INFO structure */
+#define DM_ATTRIBUTES		  (cpu_to_le32(0x02))
+#define DM_CREATE_DATE		  (cpu_to_le32(0x04))
+#define DM_CREATE_TIME		  (cpu_to_le32(0x08))
+#define DM_CREATOR_ID		  (cpu_to_le32(0x10))
+#define DM_ARCHIVE_DATE 	  (cpu_to_le32(0x20))
+#define DM_ARCHIVE_TIME 	  (cpu_to_le32(0x40))
+#define DM_ARCHIVER_ID		  (cpu_to_le32(0x80))
+#define DM_MODIFY_DATE		  (cpu_to_le32(0x0100))
+#define DM_MODIFY_TIME		  (cpu_to_le32(0x0200))
+#define DM_MODIFIER_ID		  (cpu_to_le32(0x0400))
+#define DM_LAST_ACCESS_DATE	  (cpu_to_le32(0x0800))
+#define DM_INHERITED_RIGHTS_MASK  (cpu_to_le32(0x1000))
+#define DM_MAXIMUM_SPACE	  (cpu_to_le32(0x2000))
+
+struct nw_modify_dos_info {
+	__le32 attributes __attribute__((packed));
+	__le16 creationDate __attribute__((packed));
+	__le16 creationTime __attribute__((packed));
+	__u32 creatorID __attribute__((packed));
+	__le16 modifyDate __attribute__((packed));
+	__le16 modifyTime __attribute__((packed));
+	__u32 modifierID __attribute__((packed));
+	__u16 archiveDate __attribute__((packed));
+	__u16 archiveTime __attribute__((packed));
+	__u32 archiverID __attribute__((packed));
+	__le16 lastAccessDate __attribute__((packed));
+	__u16 inheritanceGrantMask __attribute__((packed));
+	__u16 inheritanceRevokeMask __attribute__((packed));
+	__u32 maximumSpace __attribute__((packed));
+};
+
+struct nw_search_sequence {
+	__u8 volNumber __attribute__((packed));
+	__u32 dirBase __attribute__((packed));
+	__u32 sequence __attribute__((packed));
+};
+
+#endif				/* _LINUX_NCP_H */
diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h
new file mode 100644
index 000000000000..7297e4372c0f
--- /dev/null
+++ b/include/linux/ncp_fs.h
@@ -0,0 +1,300 @@
+/*
+ *  ncp_fs.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_FS_H
+#define _LINUX_NCP_FS_H
+
+#include <linux/fs.h>
+#include <linux/in.h>
+#include <linux/types.h>
+
+#include <linux/ncp_fs_i.h>
+#include <linux/ncp_fs_sb.h>
+#include <linux/ipx.h>
+#include <linux/ncp_no.h>
+
+/*
+ * ioctl commands
+ */
+
+struct ncp_ioctl_request {
+	unsigned int function;
+	unsigned int size;
+	char __user *data;
+};
+
+struct ncp_fs_info {
+	int version;
+	struct sockaddr_ipx addr;
+	__kernel_uid_t mounted_uid;
+	int connection;		/* Connection number the server assigned us */
+	int buffer_size;	/* The negotiated buffer size, to be
+				   used for read/write requests! */
+
+	int volume_number;
+	__le32 directory_id;
+};
+
+struct ncp_fs_info_v2 {
+	int version;
+	unsigned long mounted_uid;
+	unsigned int connection;
+	unsigned int buffer_size;
+
+	unsigned int volume_number;
+	__le32 directory_id;
+
+	__u32 dummy1;
+	__u32 dummy2;
+	__u32 dummy3;
+};
+
+struct ncp_sign_init
+{
+	char sign_root[8];
+	char sign_last[16];
+};
+
+struct ncp_lock_ioctl
+{
+#define NCP_LOCK_LOG	0
+#define NCP_LOCK_SH	1
+#define NCP_LOCK_EX	2
+#define NCP_LOCK_CLEAR	256
+	int		cmd;
+	int		origin;
+	unsigned int	offset;
+	unsigned int	length;
+#define NCP_LOCK_DEFAULT_TIMEOUT	18
+#define NCP_LOCK_MAX_TIMEOUT		180
+	int		timeout;
+};
+
+struct ncp_setroot_ioctl
+{
+	int		volNumber;
+	int		namespace;
+	__le32		dirEntNum;
+};
+
+struct ncp_objectname_ioctl
+{
+#define NCP_AUTH_NONE	0x00
+#define NCP_AUTH_BIND	0x31
+#define NCP_AUTH_NDS	0x32
+	int		auth_type;
+	size_t		object_name_len;
+	void __user *	object_name;	/* an userspace data, in most cases user name */
+};
+
+struct ncp_privatedata_ioctl
+{
+	size_t		len;
+	void __user *	data;		/* ~1000 for NDS */
+};
+
+/* NLS charsets by ioctl */
+#define NCP_IOCSNAME_LEN 20
+struct ncp_nls_ioctl
+{
+	unsigned char codepage[NCP_IOCSNAME_LEN+1];
+	unsigned char iocharset[NCP_IOCSNAME_LEN+1];
+};
+
+#define	NCP_IOC_NCPREQUEST		_IOR('n', 1, struct ncp_ioctl_request)
+#define	NCP_IOC_GETMOUNTUID		_IOW('n', 2, __kernel_old_uid_t)
+#define NCP_IOC_GETMOUNTUID2		_IOW('n', 2, unsigned long)
+
+#define NCP_IOC_CONN_LOGGED_IN          _IO('n', 3)
+
+#define NCP_GET_FS_INFO_VERSION    (1)
+#define NCP_IOC_GET_FS_INFO             _IOWR('n', 4, struct ncp_fs_info)
+#define NCP_GET_FS_INFO_VERSION_V2 (2)
+#define NCP_IOC_GET_FS_INFO_V2		_IOWR('n', 4, struct ncp_fs_info_v2)
+
+#define NCP_IOC_SIGN_INIT		_IOR('n', 5, struct ncp_sign_init)
+#define NCP_IOC_SIGN_WANTED		_IOR('n', 6, int)
+#define NCP_IOC_SET_SIGN_WANTED		_IOW('n', 6, int)
+
+#define NCP_IOC_LOCKUNLOCK		_IOR('n', 7, struct ncp_lock_ioctl)
+
+#define NCP_IOC_GETROOT			_IOW('n', 8, struct ncp_setroot_ioctl)
+#define NCP_IOC_SETROOT			_IOR('n', 8, struct ncp_setroot_ioctl)
+
+#define NCP_IOC_GETOBJECTNAME		_IOWR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_SETOBJECTNAME		_IOR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_GETPRIVATEDATA		_IOWR('n', 10, struct ncp_privatedata_ioctl)
+#define NCP_IOC_SETPRIVATEDATA		_IOR('n', 10, struct ncp_privatedata_ioctl)
+
+#define NCP_IOC_GETCHARSETS		_IOWR('n', 11, struct ncp_nls_ioctl)
+#define NCP_IOC_SETCHARSETS		_IOR('n', 11, struct ncp_nls_ioctl)
+
+#define NCP_IOC_GETDENTRYTTL		_IOW('n', 12, __u32)
+#define NCP_IOC_SETDENTRYTTL		_IOR('n', 12, __u32)
+
+/*
+ * The packet size to allocate. One page should be enough.
+ */
+#define NCP_PACKET_SIZE 4070
+
+#define NCP_MAXPATHLEN 255
+#define NCP_MAXNAMELEN 14
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/* undef because public define in umsdos_fs.h (ncp_fs.h isn't public) */
+#undef PRINTK
+/* define because it is easy to change PRINTK to {*}PRINTK */
+#define PRINTK(format, args...) printk(KERN_DEBUG format , ## args)
+
+#undef NCPFS_PARANOIA
+#ifdef NCPFS_PARANOIA
+#define PPRINTK(format, args...) PRINTK(format , ## args)
+#else
+#define PPRINTK(format, args...)
+#endif
+
+#ifndef DEBUG_NCP
+#define DEBUG_NCP 0
+#endif
+#if DEBUG_NCP > 0
+#define DPRINTK(format, args...) PRINTK(format , ## args)
+#else
+#define DPRINTK(format, args...)
+#endif
+#if DEBUG_NCP > 1
+#define DDPRINTK(format, args...) PRINTK(format , ## args)
+#else
+#define DDPRINTK(format, args...)
+#endif
+
+#define NCP_MAX_RPC_TIMEOUT (6*HZ)
+
+
+struct ncp_entry_info {
+	struct nw_info_struct	i;
+	ino_t			ino;
+	int			opened;
+	int			access;
+	unsigned int		volume;
+	__u8			file_handle[6];
+};
+
+/* Guess, what 0x564c is :-) */
+#define NCP_SUPER_MAGIC  0x564c
+
+
+static inline struct ncp_server *NCP_SBP(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+#define NCP_SERVER(inode)	NCP_SBP((inode)->i_sb)
+static inline struct ncp_inode_info *NCP_FINFO(struct inode *inode)
+{
+	return container_of(inode, struct ncp_inode_info, vfs_inode);
+}
+
+#ifdef DEBUG_NCP_MALLOC
+
+#include <linux/slab.h>
+
+extern int ncp_malloced;
+extern int ncp_current_malloced;
+
+static inline void *
+ ncp_kmalloc(unsigned int size, int priority)
+{
+	ncp_malloced += 1;
+	ncp_current_malloced += 1;
+	return kmalloc(size, priority);
+}
+
+static inline void ncp_kfree_s(void *obj, int size)
+{
+	ncp_current_malloced -= 1;
+	kfree(obj);
+}
+
+#else				/* DEBUG_NCP_MALLOC */
+
+#define ncp_kmalloc(s,p) kmalloc(s,p)
+#define ncp_kfree_s(o,s) kfree(o)
+
+#endif				/* DEBUG_NCP_MALLOC */
+
+/* linux/fs/ncpfs/inode.c */
+int ncp_notify_change(struct dentry *, struct iattr *);
+struct inode *ncp_iget(struct super_block *, struct ncp_entry_info *);
+void ncp_update_inode(struct inode *, struct ncp_entry_info *);
+void ncp_update_inode2(struct inode *, struct ncp_entry_info *);
+
+/* linux/fs/ncpfs/dir.c */
+extern struct inode_operations ncp_dir_inode_operations;
+extern struct file_operations ncp_dir_operations;
+int ncp_conn_logged_in(struct super_block *);
+int ncp_date_dos2unix(__le16 time, __le16 date);
+void ncp_date_unix2dos(int unix_date, __le16 * time, __le16 * date);
+
+/* linux/fs/ncpfs/ioctl.c */
+int ncp_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+
+/* linux/fs/ncpfs/sock.c */
+int ncp_request2(struct ncp_server *server, int function,
+	void* reply, int max_reply_size);
+static inline int ncp_request(struct ncp_server *server, int function) {
+	return ncp_request2(server, function, server->packet, server->packet_size);
+}
+int ncp_connect(struct ncp_server *server);
+int ncp_disconnect(struct ncp_server *server);
+void ncp_lock_server(struct ncp_server *server);
+void ncp_unlock_server(struct ncp_server *server);
+
+/* linux/fs/ncpfs/file.c */
+extern struct inode_operations ncp_file_inode_operations;
+extern struct file_operations ncp_file_operations;
+int ncp_make_open(struct inode *, int);
+
+/* linux/fs/ncpfs/mmap.c */
+int ncp_mmap(struct file *, struct vm_area_struct *);
+
+/* linux/fs/ncpfs/ncplib_kernel.c */
+int ncp_make_closed(struct inode *);
+
+#define ncp_namespace(i)	(NCP_SERVER(i)->name_space[NCP_FINFO(i)->volNumber])
+
+static inline int ncp_preserve_entry_case(struct inode *i, __u32 nscreator)
+{
+#ifdef CONFIG_NCPFS_SMALLDOS
+	int ns = ncp_namespace(i);
+
+	if ((ns == NW_NS_DOS)
+#ifdef CONFIG_NCPFS_OS2_NS
+		|| ((ns == NW_NS_OS2) && (nscreator == NW_NS_DOS))
+#endif /* CONFIG_NCPFS_OS2_NS */
+				)
+		return 0;
+#endif /* CONFIG_NCPFS_SMALLDOS */
+	return 1;
+}
+
+#define ncp_preserve_case(i)	(ncp_namespace(i) != NW_NS_DOS)
+
+static inline int ncp_case_sensitive(struct inode *i)
+{
+#ifdef CONFIG_NCPFS_NFS_NS
+	return ncp_namespace(i) == NW_NS_NFS;
+#else
+	return 0;
+#endif	/* CONFIG_NCPFS_NFS_NS */
+} 
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _LINUX_NCP_FS_H */
diff --git a/include/linux/ncp_fs_i.h b/include/linux/ncp_fs_i.h
new file mode 100644
index 000000000000..415be1ec6f98
--- /dev/null
+++ b/include/linux/ncp_fs_i.h
@@ -0,0 +1,33 @@
+/*
+ *  ncp_fs_i.h
+ *
+ *  Copyright (C) 1995 Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_FS_I
+#define _LINUX_NCP_FS_I
+
+#ifdef __KERNEL__
+
+/*
+ * This is the ncpfs part of the inode structure. This must contain
+ * all the information we need to work with an inode after creation.
+ */
+struct ncp_inode_info {
+	__le32	dirEntNum;
+	__le32	DosDirNum;
+	__u8	volNumber;
+	__le32	nwattr;
+	struct semaphore open_sem;
+	atomic_t	opened;
+	int	access;
+	int	flags;
+#define NCPI_KLUDGE_SYMLINK	0x0001
+	__u8	file_handle[6];
+	struct inode vfs_inode;
+};
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_NCP_FS_I */
diff --git a/include/linux/ncp_fs_sb.h b/include/linux/ncp_fs_sb.h
new file mode 100644
index 000000000000..cf858eb80f0b
--- /dev/null
+++ b/include/linux/ncp_fs_sb.h
@@ -0,0 +1,157 @@
+/*
+ *  ncp_fs_sb.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _NCP_FS_SB
+#define _NCP_FS_SB
+
+#include <linux/types.h>
+#include <linux/ncp_mount.h>
+#include <linux/net.h>
+
+#ifdef __KERNEL__
+
+#include <linux/workqueue.h>
+
+#define NCP_DEFAULT_OPTIONS 0		/* 2 for packet signatures */
+
+struct sock;
+
+struct ncp_server {
+
+	struct ncp_mount_data_kernel m;	/* Nearly all of the mount data is of
+					   interest for us later, so we store
+					   it completely. */
+
+	__u8 name_space[NCP_NUMBER_OF_VOLUMES + 2];
+
+	struct file *ncp_filp;	/* File pointer to ncp socket */
+	struct socket *ncp_sock;/* ncp socket */
+	struct file *info_filp;
+	struct socket *info_sock;
+
+	u8 sequence;
+	u8 task;
+	u16 connection;		/* Remote connection number */
+
+	u8 completion;		/* Status message from server */
+	u8 conn_status;		/* Bit 4 = 1 ==> Server going down, no
+				   requests allowed anymore.
+				   Bit 0 = 1 ==> Server is down. */
+
+	int buffer_size;	/* Negotiated bufsize */
+
+	int reply_size;		/* Size of last reply */
+
+	int packet_size;
+	unsigned char *packet;	/* Here we prepare requests and
+				   receive replies */
+
+	int lock;		/* To prevent mismatch in protocols. */
+	struct semaphore sem;
+
+	int current_size;	/* for packet preparation */
+	int has_subfunction;
+	int ncp_reply_size;
+
+	int root_setuped;
+
+	/* info for packet signing */
+	int sign_wanted;	/* 1=Server needs signed packets */
+	int sign_active;	/* 0=don't do signing, 1=do */
+	char sign_root[8];	/* generated from password and encr. key */
+	char sign_last[16];	
+
+	/* Authentication info: NDS or BINDERY, username */
+	struct {
+		int	auth_type;
+		size_t	object_name_len;
+		void*	object_name;
+		int	object_type;
+	} auth;
+	/* Password info */
+	struct {
+		size_t	len;
+		void*	data;
+	} priv;
+
+	/* nls info: codepage for volume and charset for I/O */
+	struct nls_table *nls_vol;
+	struct nls_table *nls_io;
+
+	/* maximum age in jiffies */
+	int dentry_ttl;
+
+	/* miscellaneous */
+	unsigned int flags;
+
+	spinlock_t requests_lock;	/* Lock accesses to tx.requests, tx.creq and rcv.creq when STREAM mode */
+
+	void (*data_ready)(struct sock* sk, int len);
+	void (*error_report)(struct sock* sk);
+	void (*write_space)(struct sock* sk);	/* STREAM mode only */
+	struct {
+		struct work_struct tq;		/* STREAM/DGRAM: data/error ready */
+		struct ncp_request_reply* creq;	/* STREAM/DGRAM: awaiting reply from this request */
+		struct semaphore creq_sem;	/* DGRAM only: lock accesses to rcv.creq */
+
+		unsigned int state;		/* STREAM only: receiver state */
+		struct {
+			__u32 magic __attribute__((packed));
+			__u32 len __attribute__((packed));
+			__u16 type __attribute__((packed));
+			__u16 p1 __attribute__((packed));
+			__u16 p2 __attribute__((packed));
+			__u16 p3 __attribute__((packed));
+			__u16 type2 __attribute__((packed));
+		} buf;				/* STREAM only: temporary buffer */
+		unsigned char* ptr;		/* STREAM only: pointer to data */
+		size_t len;			/* STREAM only: length of data to receive */
+	} rcv;
+	struct {
+		struct list_head requests;	/* STREAM only: queued requests */
+		struct work_struct tq;		/* STREAM only: transmitter ready */
+		struct ncp_request_reply* creq;	/* STREAM only: currently transmitted entry */
+	} tx;
+	struct timer_list timeout_tm;		/* DGRAM only: timeout timer */
+	struct work_struct timeout_tq;		/* DGRAM only: associated queue, we run timers from process context */
+	int timeout_last;			/* DGRAM only: current timeout length */
+	int timeout_retries;			/* DGRAM only: retries left */
+	struct {
+		size_t len;
+		__u8 data[128];
+	} unexpected_packet;
+};
+
+extern void ncp_tcp_rcv_proc(void *server);
+extern void ncp_tcp_tx_proc(void *server);
+extern void ncpdgram_rcv_proc(void *server);
+extern void ncpdgram_timeout_proc(void *server);
+extern void ncpdgram_timeout_call(unsigned long server);
+extern void ncp_tcp_data_ready(struct sock* sk, int len);
+extern void ncp_tcp_write_space(struct sock* sk);
+extern void ncp_tcp_error_report(struct sock* sk);
+
+#define NCP_FLAG_UTF8	1
+
+#define NCP_CLR_FLAG(server, flag)	((server)->flags &= ~(flag))
+#define NCP_SET_FLAG(server, flag)	((server)->flags |= (flag))
+#define NCP_IS_FLAG(server, flag)	((server)->flags & (flag))
+
+static inline int ncp_conn_valid(struct ncp_server *server)
+{
+	return ((server->conn_status & 0x11) == 0);
+}
+
+static inline void ncp_invalidate_conn(struct ncp_server *server)
+{
+	server->conn_status |= 0x01;
+}
+
+#endif				/* __KERNEL__ */
+
+#endif
+ 
diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h
new file mode 100644
index 000000000000..f46bddcdbd3b
--- /dev/null
+++ b/include/linux/ncp_mount.h
@@ -0,0 +1,93 @@
+/*
+ *  ncp_mount.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_MOUNT_H
+#define _LINUX_NCP_MOUNT_H
+
+#include <linux/types.h>
+#include <linux/ncp.h>
+
+#define NCP_MOUNT_VERSION 3	/* Binary */
+
+/* Values for flags */
+#define NCP_MOUNT_SOFT		0x0001
+#define NCP_MOUNT_INTR		0x0002
+#define NCP_MOUNT_STRONG	0x0004	/* enable delete/rename of r/o files */
+#define NCP_MOUNT_NO_OS2	0x0008	/* do not use OS/2 (LONG) namespace */
+#define NCP_MOUNT_NO_NFS	0x0010	/* do not use NFS namespace */
+#define NCP_MOUNT_EXTRAS	0x0020
+#define NCP_MOUNT_SYMLINKS	0x0040	/* enable symlinks */
+#define NCP_MOUNT_NFS_EXTRAS	0x0080	/* Enable use of NFS NS meta-info */
+
+struct ncp_mount_data {
+	int version;
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	__kernel_uid_t mounted_uid;	/* Who may umount() this filesystem? */
+	__kernel_pid_t wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+	unsigned int flags;
+
+	__kernel_uid_t uid;
+	__kernel_gid_t gid;
+	__kernel_mode_t file_mode;
+	__kernel_mode_t dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V4	(4)	/* Binary or text */
+
+struct ncp_mount_data_v4 {
+	int version;
+	unsigned long flags;	/* NCP_MOUNT_* flags */
+	/* MIPS uses long __kernel_uid_t, but... */
+	/* we neever pass -1, so it is safe */
+	unsigned long mounted_uid;	/* Who may umount() this filesystem? */
+	/* MIPS uses long __kernel_pid_t */
+	long wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+
+	/* MIPS uses long __kernel_uid_t... */
+	/* we never pass -1, so it is safe */
+	unsigned long uid;
+	unsigned long gid;
+	/* MIPS uses unsigned long __kernel_mode_t */
+	unsigned long file_mode;
+	unsigned long dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V5	(5)	/* Text only */
+
+#ifdef __KERNEL__
+
+struct ncp_mount_data_kernel {
+	unsigned long    flags;		/* NCP_MOUNT_* flags */
+	unsigned int	 int_flags;	/* internal flags */
+#define NCP_IMOUNT_LOGGEDIN_POSSIBLE	0x0001
+	__kernel_uid32_t mounted_uid;	/* Who may umount() this filesystem? */
+	__kernel_pid_t   wdog_pid;		/* Who cares for our watchdog packets? */
+	unsigned int     ncp_fd;	/* The socket to the ncp port */
+	unsigned int     time_out;	/* How long should I wait after
+					   sending a NCP request? */
+	unsigned int     retry_count;	/* And how often should I retry? */
+	unsigned char	 mounted_vol[NCP_VOLNAME_LEN + 1];
+	__kernel_uid32_t uid;
+	__kernel_gid32_t gid;
+	__kernel_mode_t  file_mode;
+	__kernel_mode_t  dir_mode;
+	int		 info_fd;
+};
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h
new file mode 100644
index 000000000000..f56a696a7cc6
--- /dev/null
+++ b/include/linux/ncp_no.h
@@ -0,0 +1,19 @@
+#ifndef _NCP_NO
+#define _NCP_NO
+
+/* these define the attribute byte as seen by NCP */
+#define aRONLY			(__constant_cpu_to_le32(1))
+#define aHIDDEN			(__constant_cpu_to_le32(2))
+#define aSYSTEM			(__constant_cpu_to_le32(4))
+#define aEXECUTE		(__constant_cpu_to_le32(8))
+#define aDIR			(__constant_cpu_to_le32(0x10))
+#define aARCH			(__constant_cpu_to_le32(0x20))
+#define aSHARED			(__constant_cpu_to_le32(0x80))
+#define aDONTSUBALLOCATE	(__constant_cpu_to_le32(1L<<11))
+#define aTRANSACTIONAL		(__constant_cpu_to_le32(1L<<12))
+#define aPURGE			(__constant_cpu_to_le32(1L<<16))
+#define aRENAMEINHIBIT		(__constant_cpu_to_le32(1L<<17))
+#define aDELETEINHIBIT		(__constant_cpu_to_le32(1L<<18))
+#define aDONTCOMPRESS		(__constant_cpu_to_le32(1L<<27))
+
+#endif /* _NCP_NO */
diff --git a/include/linux/net.h b/include/linux/net.h
new file mode 100644
index 000000000000..7823b3482506
--- /dev/null
+++ b/include/linux/net.h
@@ -0,0 +1,287 @@
+/*
+ * NET		An implementation of the SOCKET network access protocol.
+ *		This is the master header file for the Linux NET layer,
+ *		or, in plain English: the networking handling part of the
+ *		kernel.
+ *
+ * Version:	@(#)net.h	1.0.3	05/25/93
+ *
+ * Authors:	Orest Zborowski, <obz@Kodak.COM>
+ *		Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_NET_H
+#define _LINUX_NET_H
+
+#include <linux/config.h>
+#include <linux/wait.h>
+#include <linux/stringify.h>
+#include <asm/socket.h>
+
+struct poll_table_struct;
+struct inode;
+
+#define NPROTO		32		/* should be enough for now..	*/
+
+#define SYS_SOCKET	1		/* sys_socket(2)		*/
+#define SYS_BIND	2		/* sys_bind(2)			*/
+#define SYS_CONNECT	3		/* sys_connect(2)		*/
+#define SYS_LISTEN	4		/* sys_listen(2)		*/
+#define SYS_ACCEPT	5		/* sys_accept(2)		*/
+#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
+#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
+#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
+#define SYS_SEND	9		/* sys_send(2)			*/
+#define SYS_RECV	10		/* sys_recv(2)			*/
+#define SYS_SENDTO	11		/* sys_sendto(2)		*/
+#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
+#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
+#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
+#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
+#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
+#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+
+typedef enum {
+	SS_FREE = 0,			/* not allocated		*/
+	SS_UNCONNECTED,			/* unconnected to any socket	*/
+	SS_CONNECTING,			/* in process of connecting	*/
+	SS_CONNECTED,			/* connected to socket		*/
+	SS_DISCONNECTING		/* in process of disconnecting	*/
+} socket_state;
+
+#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
+
+#ifdef __KERNEL__
+
+#define SOCK_ASYNC_NOSPACE	0
+#define SOCK_ASYNC_WAITDATA	1
+#define SOCK_NOSPACE		2
+#define SOCK_PASSCRED		3
+
+#ifndef ARCH_HAS_SOCKET_TYPES
+/** sock_type - Socket types
+ * 
+ * When adding some new socket type please
+ * grep ARCH_HAS_SOCKET_TYPE include/asm-* /socket.h, at least MIPS
+ * overrides this enum for binary compat reasons.
+ * 
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket 
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ */
+enum sock_type {
+	SOCK_STREAM	= 1,
+	SOCK_DGRAM	= 2,
+	SOCK_RAW	= 3,
+	SOCK_RDM	= 4,
+	SOCK_SEQPACKET	= 5,
+	SOCK_PACKET	= 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+
+#endif /* ARCH_HAS_SOCKET_TYPES */
+
+/**
+ *  struct socket - general BSD socket
+ *  @state - socket state (%SS_CONNECTED, etc)
+ *  @flags - socket flags (%SOCK_ASYNC_NOSPACE, etc)
+ *  @ops - protocol specific socket operations
+ *  @fasync_list - Asynchronous wake up list
+ *  @file - File back pointer for gc
+ *  @sk - internal networking protocol agnostic socket representation
+ *  @wait - wait queue for several uses
+ *  @type - socket type (%SOCK_STREAM, etc)
+ *  @passcred - credentials (used only in Unix Sockets (aka PF_LOCAL))
+ */
+struct socket {
+	socket_state		state;
+	unsigned long		flags;
+	struct proto_ops	*ops;
+	struct fasync_struct	*fasync_list;
+	struct file		*file;
+	struct sock		*sk;
+	wait_queue_head_t	wait;
+	short			type;
+};
+
+struct vm_area_struct;
+struct page;
+struct kiocb;
+struct sockaddr;
+struct msghdr;
+struct module;
+
+struct proto_ops {
+	int		family;
+	struct module	*owner;
+	int		(*release)   (struct socket *sock);
+	int		(*bind)	     (struct socket *sock,
+				      struct sockaddr *myaddr,
+				      int sockaddr_len);
+	int		(*connect)   (struct socket *sock,
+				      struct sockaddr *vaddr,
+				      int sockaddr_len, int flags);
+	int		(*socketpair)(struct socket *sock1,
+				      struct socket *sock2);
+	int		(*accept)    (struct socket *sock,
+				      struct socket *newsock, int flags);
+	int		(*getname)   (struct socket *sock,
+				      struct sockaddr *addr,
+				      int *sockaddr_len, int peer);
+	unsigned int	(*poll)	     (struct file *file, struct socket *sock,
+				      struct poll_table_struct *wait);
+	int		(*ioctl)     (struct socket *sock, unsigned int cmd,
+				      unsigned long arg);
+	int		(*listen)    (struct socket *sock, int len);
+	int		(*shutdown)  (struct socket *sock, int flags);
+	int		(*setsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, int optlen);
+	int		(*getsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, int __user *optlen);
+	int		(*sendmsg)   (struct kiocb *iocb, struct socket *sock,
+				      struct msghdr *m, size_t total_len);
+	int		(*recvmsg)   (struct kiocb *iocb, struct socket *sock,
+				      struct msghdr *m, size_t total_len,
+				      int flags);
+	int		(*mmap)	     (struct file *file, struct socket *sock,
+				      struct vm_area_struct * vma);
+	ssize_t		(*sendpage)  (struct socket *sock, struct page *page,
+				      int offset, size_t size, int flags);
+};
+
+struct net_proto_family {
+	int		family;
+	int		(*create)(struct socket *sock, int protocol);
+	/* These are counters for the number of different methods of
+	   each we support */
+	short		authentication;
+	short		encryption;
+	short		encrypt_net;
+	struct module	*owner;
+};
+
+struct iovec;
+struct kvec;
+
+extern int	     sock_wake_async(struct socket *sk, int how, int band);
+extern int	     sock_register(struct net_proto_family *fam);
+extern int	     sock_unregister(int family);
+extern int	     sock_create(int family, int type, int proto,
+				 struct socket **res);
+extern int	     sock_create_kern(int family, int type, int proto,
+				      struct socket **res);
+extern int	     sock_create_lite(int family, int type, int proto,
+				      struct socket **res); 
+extern void	     sock_release(struct socket *sock);
+extern int   	     sock_sendmsg(struct socket *sock, struct msghdr *msg,
+				  size_t len);
+extern int	     sock_recvmsg(struct socket *sock, struct msghdr *msg,
+				  size_t size, int flags);
+extern int 	     sock_map_fd(struct socket *sock);
+extern struct socket *sockfd_lookup(int fd, int *err);
+#define		     sockfd_put(sock) fput(sock->file)
+extern int	     net_ratelimit(void);
+extern unsigned long net_random(void);
+extern void	     net_srandom(unsigned long);
+extern void	     net_random_init(void);
+
+extern int   	     kernel_sendmsg(struct socket *sock, struct msghdr *msg,
+				    struct kvec *vec, size_t num, size_t len);
+extern int   	     kernel_recvmsg(struct socket *sock, struct msghdr *msg,
+				    struct kvec *vec, size_t num,
+				    size_t len, int flags);
+
+#ifndef CONFIG_SMP
+#define SOCKOPS_WRAPPED(name) name
+#define SOCKOPS_WRAP(name, fam)
+#else
+
+#define SOCKOPS_WRAPPED(name) __unlocked_##name
+
+#define SOCKCALL_WRAP(name, call, parms, args)		\
+static int __lock_##name##_##call  parms		\
+{							\
+	int ret;					\
+	lock_kernel();					\
+	ret = __unlocked_##name##_ops.call  args ;\
+	unlock_kernel();				\
+	return ret;					\
+}
+
+#define SOCKCALL_UWRAP(name, call, parms, args)		\
+static unsigned int __lock_##name##_##call  parms	\
+{							\
+	int ret;					\
+	lock_kernel();					\
+	ret = __unlocked_##name##_ops.call  args ;\
+	unlock_kernel();				\
+	return ret;					\
+}
+
+
+#define SOCKOPS_WRAP(name, fam)					\
+SOCKCALL_WRAP(name, release, (struct socket *sock), (sock))	\
+SOCKCALL_WRAP(name, bind, (struct socket *sock, struct sockaddr *uaddr, int addr_len), \
+	      (sock, uaddr, addr_len))				\
+SOCKCALL_WRAP(name, connect, (struct socket *sock, struct sockaddr * uaddr, \
+			      int addr_len, int flags), 	\
+	      (sock, uaddr, addr_len, flags))			\
+SOCKCALL_WRAP(name, socketpair, (struct socket *sock1, struct socket *sock2), \
+	      (sock1, sock2))					\
+SOCKCALL_WRAP(name, accept, (struct socket *sock, struct socket *newsock, \
+			 int flags), (sock, newsock, flags)) \
+SOCKCALL_WRAP(name, getname, (struct socket *sock, struct sockaddr *uaddr, \
+			 int *addr_len, int peer), (sock, uaddr, addr_len, peer)) \
+SOCKCALL_UWRAP(name, poll, (struct file *file, struct socket *sock, struct poll_table_struct *wait), \
+	      (file, sock, wait)) \
+SOCKCALL_WRAP(name, ioctl, (struct socket *sock, unsigned int cmd, \
+			 unsigned long arg), (sock, cmd, arg)) \
+SOCKCALL_WRAP(name, listen, (struct socket *sock, int len), (sock, len)) \
+SOCKCALL_WRAP(name, shutdown, (struct socket *sock, int flags), (sock, flags)) \
+SOCKCALL_WRAP(name, setsockopt, (struct socket *sock, int level, int optname, \
+			 char __user *optval, int optlen), (sock, level, optname, optval, optlen)) \
+SOCKCALL_WRAP(name, getsockopt, (struct socket *sock, int level, int optname, \
+			 char __user *optval, int __user *optlen), (sock, level, optname, optval, optlen)) \
+SOCKCALL_WRAP(name, sendmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len), \
+	      (iocb, sock, m, len)) \
+SOCKCALL_WRAP(name, recvmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len, int flags), \
+	      (iocb, sock, m, len, flags)) \
+SOCKCALL_WRAP(name, mmap, (struct file *file, struct socket *sock, struct vm_area_struct *vma), \
+	      (file, sock, vma)) \
+	      \
+static struct proto_ops name##_ops = {			\
+	.family		= fam,				\
+	.owner		= THIS_MODULE,			\
+	.release	= __lock_##name##_release,	\
+	.bind		= __lock_##name##_bind,		\
+	.connect	= __lock_##name##_connect,	\
+	.socketpair	= __lock_##name##_socketpair,	\
+	.accept		= __lock_##name##_accept,	\
+	.getname	= __lock_##name##_getname,	\
+	.poll		= __lock_##name##_poll,		\
+	.ioctl		= __lock_##name##_ioctl,	\
+	.listen		= __lock_##name##_listen,	\
+	.shutdown	= __lock_##name##_shutdown,	\
+	.setsockopt	= __lock_##name##_setsockopt,	\
+	.getsockopt	= __lock_##name##_getsockopt,	\
+	.sendmsg	= __lock_##name##_sendmsg,	\
+	.recvmsg	= __lock_##name##_recvmsg,	\
+	.mmap		= __lock_##name##_mmap,		\
+};
+#endif
+
+#define MODULE_ALIAS_NETPROTO(proto) \
+	MODULE_ALIAS("net-pf-" __stringify(proto))
+
+#endif /* __KERNEL__ */
+#endif	/* _LINUX_NET_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
new file mode 100644
index 000000000000..8d775be67833
--- /dev/null
+++ b/include/linux/netdevice.h
@@ -0,0 +1,933 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <Alan.Cox@linux.org>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _LINUX_NETDEVICE_H
+#define _LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+
+#ifdef __KERNEL__
+#include <asm/atomic.h>
+#include <asm/cache.h>
+#include <asm/byteorder.h>
+
+#include <linux/config.h>
+#include <linux/device.h>
+#include <linux/percpu.h>
+
+struct divert_blk;
+struct vlan_group;
+struct ethtool_ops;
+struct netpoll;
+					/* source back-compat hooks */
+#define SET_ETHTOOL_OPS(netdev,ops) \
+	( (netdev)->ethtool_ops = (ops) )
+
+#define HAVE_ALLOC_NETDEV		/* feature macro: alloc_xxxdev
+					   functions are available. */
+#define HAVE_FREE_NETDEV		/* free_netdev() */
+#define HAVE_NETDEV_PRIV		/* netdev_priv() */
+
+#define NET_XMIT_SUCCESS	0
+#define NET_XMIT_DROP		1	/* skb dropped			*/
+#define NET_XMIT_CN		2	/* congestion notification	*/
+#define NET_XMIT_POLICED	3	/* skb is shot by police	*/
+#define NET_XMIT_BYPASS		4	/* packet does not leave via dequeue;
+					   (TC use only - dev_queue_xmit
+					   returns this as NET_XMIT_SUCCESS) */
+
+/* Backlog congestion levels */
+#define NET_RX_SUCCESS		0   /* keep 'em coming, baby */
+#define NET_RX_DROP		1  /* packet dropped */
+#define NET_RX_CN_LOW		2   /* storm alert, just in case */
+#define NET_RX_CN_MOD		3   /* Storm on its way! */
+#define NET_RX_CN_HIGH		4   /* The storm is here */
+#define NET_RX_BAD		5  /* packet dropped due to kernel error */
+
+#define net_xmit_errno(e)	((e) != NET_XMIT_CN ? -ENOBUFS : 0)
+
+#endif
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Driver transmit return codes */
+#define NETDEV_TX_OK 0		/* driver took care of packet */
+#define NETDEV_TX_BUSY 1	/* driver tx path was busy*/
+#define NETDEV_TX_LOCKED -1	/* driver tx lock was already taken */
+
+/*
+ *	Compute the worst case header length according to the protocols
+ *	used.
+ */
+ 
+#if !defined(CONFIG_AX25) && !defined(CONFIG_AX25_MODULE) && !defined(CONFIG_TR)
+#define LL_MAX_HEADER	32
+#else
+#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+#define LL_MAX_HEADER	96
+#else
+#define LL_MAX_HEADER	48
+#endif
+#endif
+
+#if !defined(CONFIG_NET_IPIP) && \
+    !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
+#define MAX_HEADER LL_MAX_HEADER
+#else
+#define MAX_HEADER (LL_MAX_HEADER + 48)
+#endif
+
+/*
+ *	Network device statistics. Akin to the 2.0 ether stats but
+ *	with byte counters.
+ */
+ 
+struct net_device_stats
+{
+	unsigned long	rx_packets;		/* total packets received	*/
+	unsigned long	tx_packets;		/* total packets transmitted	*/
+	unsigned long	rx_bytes;		/* total bytes received 	*/
+	unsigned long	tx_bytes;		/* total bytes transmitted	*/
+	unsigned long	rx_errors;		/* bad packets received		*/
+	unsigned long	tx_errors;		/* packet transmit problems	*/
+	unsigned long	rx_dropped;		/* no space in linux buffers	*/
+	unsigned long	tx_dropped;		/* no space available in linux	*/
+	unsigned long	multicast;		/* multicast packets received	*/
+	unsigned long	collisions;
+
+	/* detailed rx_errors: */
+	unsigned long	rx_length_errors;
+	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
+	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
+	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
+	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	unsigned long	tx_aborted_errors;
+	unsigned long	tx_carrier_errors;
+	unsigned long	tx_fifo_errors;
+	unsigned long	tx_heartbeat_errors;
+	unsigned long	tx_window_errors;
+	
+	/* for cslip etc */
+	unsigned long	rx_compressed;
+	unsigned long	tx_compressed;
+};
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+#ifdef __KERNEL__
+
+#include <linux/cache.h>
+#include <linux/skbuff.h>
+
+struct neighbour;
+struct neigh_parms;
+struct sk_buff;
+
+struct netif_rx_stats
+{
+	unsigned total;
+	unsigned dropped;
+	unsigned time_squeeze;
+	unsigned throttled;
+	unsigned fastroute_hit;
+	unsigned fastroute_success;
+	unsigned fastroute_defer;
+	unsigned fastroute_deferred_out;
+	unsigned fastroute_latency_reduction;
+	unsigned cpu_collision;
+};
+
+DECLARE_PER_CPU(struct netif_rx_stats, netdev_rx_stat);
+
+
+/*
+ *	We tag multicasts with these structures.
+ */
+ 
+struct dev_mc_list
+{	
+	struct dev_mc_list	*next;
+	__u8			dmi_addr[MAX_ADDR_LEN];
+	unsigned char		dmi_addrlen;
+	int			dmi_users;
+	int			dmi_gusers;
+};
+
+struct hh_cache
+{
+	struct hh_cache *hh_next;	/* Next entry			     */
+	atomic_t	hh_refcnt;	/* number of users                   */
+	unsigned short  hh_type;	/* protocol identifier, f.e ETH_P_IP
+                                         *  NOTE:  For VLANs, this will be the
+                                         *  encapuslated type. --BLG
+                                         */
+	int		hh_len;		/* length of header */
+	int		(*hh_output)(struct sk_buff *skb);
+	rwlock_t	hh_lock;
+
+	/* cached hardware header; allow for machine alignment needs.        */
+#define HH_DATA_MOD	16
+#define HH_DATA_OFF(__len) \
+	(HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1)))
+#define HH_DATA_ALIGN(__len) \
+	(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
+	unsigned long	hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
+};
+
+/* Reserve HH_DATA_MOD byte aligned hard_header_len, but at least that much.
+ * Alternative is:
+ *   dev->hard_header_len ? (dev->hard_header_len +
+ *                           (HH_DATA_MOD - 1)) & ~(HH_DATA_MOD - 1) : 0
+ *
+ * We could use other alignment values, but we must maintain the
+ * relationship HH alignment <= LL alignment.
+ */
+#define LL_RESERVED_SPACE(dev) \
+	(((dev)->hard_header_len&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+#define LL_RESERVED_SPACE_EXTRA(dev,extra) \
+	((((dev)->hard_header_len+extra)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+
+/* These flag bits are private to the generic network queueing
+ * layer, they may not be explicitly referenced by any other
+ * code.
+ */
+
+enum netdev_state_t
+{
+	__LINK_STATE_XOFF=0,
+	__LINK_STATE_START,
+	__LINK_STATE_PRESENT,
+	__LINK_STATE_SCHED,
+	__LINK_STATE_NOCARRIER,
+	__LINK_STATE_RX_SCHED,
+	__LINK_STATE_LINKWATCH_PENDING
+};
+
+
+/*
+ * This structure holds at boot time configured netdevice settings. They
+ * are then used in the device probing. 
+ */
+struct netdev_boot_setup {
+	char name[IFNAMSIZ];
+	struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+
+/*
+ *	The DEVICE structure.
+ *	Actually, this whole structure is a big mistake.  It mixes I/O
+ *	data with strictly "high-level" data, and it has to know about
+ *	almost every data structure used in the INET module.
+ *
+ *	FIXME: cleanup struct net_device such that network protocol info
+ *	moves out.
+ */
+
+struct net_device
+{
+
+	/*
+	 * This is the first field of the "visible" part of this structure
+	 * (i.e. as seen by users in the "Space.c" file).  It is the name
+	 * the interface.
+	 */
+	char			name[IFNAMSIZ];
+
+	/*
+	 *	I/O specific fields
+	 *	FIXME: Merge these and struct ifmap into one
+	 */
+	unsigned long		mem_end;	/* shared mem end	*/
+	unsigned long		mem_start;	/* shared mem start	*/
+	unsigned long		base_addr;	/* device I/O address	*/
+	unsigned int		irq;		/* device IRQ number	*/
+
+	/*
+	 *	Some hardware also needs these fields, but they are not
+	 *	part of the usual set specified in Space.c.
+	 */
+
+	unsigned char		if_port;	/* Selectable AUI, TP,..*/
+	unsigned char		dma;		/* DMA channel		*/
+
+	unsigned long		state;
+
+	struct net_device	*next;
+	
+	/* The device initialization function. Called only once. */
+	int			(*init)(struct net_device *dev);
+
+	/* ------- Fields preinitialized in Space.c finish here ------- */
+
+	struct net_device	*next_sched;
+
+	/* Interface index. Unique device identifier	*/
+	int			ifindex;
+	int			iflink;
+
+
+	struct net_device_stats* (*get_stats)(struct net_device *dev);
+	struct iw_statistics*	(*get_wireless_stats)(struct net_device *dev);
+
+	/* List of functions to handle Wireless Extensions (instead of ioctl).
+	 * See <net/iw_handler.h> for details. Jean II */
+	const struct iw_handler_def *	wireless_handlers;
+	/* Instance data managed by the core of Wireless Extensions. */
+	struct iw_public_data *	wireless_data;
+
+	struct ethtool_ops *ethtool_ops;
+
+	/*
+	 * This marks the end of the "visible" part of the structure. All
+	 * fields hereafter are internal to the system, and may change at
+	 * will (read: may be cleaned up at will).
+	 */
+
+	/* These may be needed for future network-power-down code. */
+	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
+	unsigned long		last_rx;	/* Time of last Rx	*/
+
+	unsigned short		flags;	/* interface flags (a la BSD)	*/
+	unsigned short		gflags;
+        unsigned short          priv_flags; /* Like 'flags' but invisible to userspace. */
+	unsigned short		padded;	/* How much padding added by alloc_netdev() */
+
+	unsigned		mtu;	/* interface MTU value		*/
+	unsigned short		type;	/* interface hardware type	*/
+	unsigned short		hard_header_len;	/* hardware hdr length	*/
+	void			*priv;	/* pointer to private data	*/
+
+	struct net_device	*master; /* Pointer to master device of a group,
+					  * which this device is member of.
+					  */
+
+	/* Interface address info. */
+	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
+	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address	*/
+	unsigned char		addr_len;	/* hardware address length	*/
+	unsigned short          dev_id;		/* for shared network cards */
+
+	struct dev_mc_list	*mc_list;	/* Multicast mac addresses	*/
+	int			mc_count;	/* Number of installed mcasts	*/
+	int			promiscuity;
+	int			allmulti;
+
+	int			watchdog_timeo;
+	struct timer_list	watchdog_timer;
+
+	/* Protocol specific pointers */
+	
+	void 			*atalk_ptr;	/* AppleTalk link 	*/
+	void			*ip_ptr;	/* IPv4 specific data	*/  
+	void                    *dn_ptr;        /* DECnet specific data */
+	void                    *ip6_ptr;       /* IPv6 specific data */
+	void			*ec_ptr;	/* Econet specific data	*/
+	void			*ax25_ptr;	/* AX.25 specific data */
+
+	struct list_head	poll_list;	/* Link to poll list	*/
+	int			quota;
+	int			weight;
+
+	struct Qdisc		*qdisc;
+	struct Qdisc		*qdisc_sleeping;
+	struct Qdisc		*qdisc_ingress;
+	struct list_head	qdisc_list;
+	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
+
+	/* ingress path synchronizer */
+	spinlock_t		ingress_lock;
+	/* hard_start_xmit synchronizer */
+	spinlock_t		xmit_lock;
+	/* cpu id of processor entered to hard_start_xmit or -1,
+	   if nobody entered there.
+	 */
+	int			xmit_lock_owner;
+	/* device queue lock */
+	spinlock_t		queue_lock;
+	/* Number of references to this device */
+	atomic_t		refcnt;
+	/* delayed register/unregister */
+	struct list_head	todo_list;
+	/* device name hash chain */
+	struct hlist_node	name_hlist;
+	/* device index hash chain */
+	struct hlist_node	index_hlist;
+
+	/* register/unregister state machine */
+	enum { NETREG_UNINITIALIZED=0,
+	       NETREG_REGISTERING,	/* called register_netdevice */
+	       NETREG_REGISTERED,	/* completed register todo */
+	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
+	       NETREG_UNREGISTERED,	/* completed unregister todo */
+	       NETREG_RELEASED,		/* called free_netdev */
+	} reg_state;
+
+	/* Net device features */
+	int			features;
+#define NETIF_F_SG		1	/* Scatter/gather IO. */
+#define NETIF_F_IP_CSUM		2	/* Can checksum only TCP/UDP over IPv4. */
+#define NETIF_F_NO_CSUM		4	/* Does not require checksum. F.e. loopack. */
+#define NETIF_F_HW_CSUM		8	/* Can checksum all the packets. */
+#define NETIF_F_HIGHDMA		32	/* Can DMA to high memory. */
+#define NETIF_F_FRAGLIST	64	/* Scatter/gather IO. */
+#define NETIF_F_HW_VLAN_TX	128	/* Transmit VLAN hw acceleration */
+#define NETIF_F_HW_VLAN_RX	256	/* Receive VLAN hw acceleration */
+#define NETIF_F_HW_VLAN_FILTER	512	/* Receive filtering on VLAN */
+#define NETIF_F_VLAN_CHALLENGED	1024	/* Device cannot handle VLAN packets */
+#define NETIF_F_TSO		2048	/* Can offload TCP/IP segmentation */
+#define NETIF_F_LLTX		4096	/* LockLess TX */
+
+	/* Called after device is detached from network. */
+	void			(*uninit)(struct net_device *dev);
+	/* Called after last user reference disappears. */
+	void			(*destructor)(struct net_device *dev);
+
+	/* Pointers to interface service routines.	*/
+	int			(*open)(struct net_device *dev);
+	int			(*stop)(struct net_device *dev);
+	int			(*hard_start_xmit) (struct sk_buff *skb,
+						    struct net_device *dev);
+#define HAVE_NETDEV_POLL
+	int			(*poll) (struct net_device *dev, int *quota);
+	int			(*hard_header) (struct sk_buff *skb,
+						struct net_device *dev,
+						unsigned short type,
+						void *daddr,
+						void *saddr,
+						unsigned len);
+	int			(*rebuild_header)(struct sk_buff *skb);
+#define HAVE_MULTICAST			 
+	void			(*set_multicast_list)(struct net_device *dev);
+#define HAVE_SET_MAC_ADDR  		 
+	int			(*set_mac_address)(struct net_device *dev,
+						   void *addr);
+#define HAVE_PRIVATE_IOCTL
+	int			(*do_ioctl)(struct net_device *dev,
+					    struct ifreq *ifr, int cmd);
+#define HAVE_SET_CONFIG
+	int			(*set_config)(struct net_device *dev,
+					      struct ifmap *map);
+#define HAVE_HEADER_CACHE
+	int			(*hard_header_cache)(struct neighbour *neigh,
+						     struct hh_cache *hh);
+	void			(*header_cache_update)(struct hh_cache *hh,
+						       struct net_device *dev,
+						       unsigned char *  haddr);
+#define HAVE_CHANGE_MTU
+	int			(*change_mtu)(struct net_device *dev, int new_mtu);
+
+#define HAVE_TX_TIMEOUT
+	void			(*tx_timeout) (struct net_device *dev);
+
+	void			(*vlan_rx_register)(struct net_device *dev,
+						    struct vlan_group *grp);
+	void			(*vlan_rx_add_vid)(struct net_device *dev,
+						   unsigned short vid);
+	void			(*vlan_rx_kill_vid)(struct net_device *dev,
+						    unsigned short vid);
+
+	int			(*hard_header_parse)(struct sk_buff *skb,
+						     unsigned char *haddr);
+	int			(*neigh_setup)(struct net_device *dev, struct neigh_parms *);
+#ifdef CONFIG_NETPOLL
+	struct netpoll		*np;
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	void                    (*poll_controller)(struct net_device *dev);
+#endif
+
+	/* bridge stuff */
+	struct net_bridge_port	*br_port;
+
+#ifdef CONFIG_NET_DIVERT
+	/* this will get initialized at each interface type init routine */
+	struct divert_blk	*divert;
+#endif /* CONFIG_NET_DIVERT */
+
+	/* class/net/name entry */
+	struct class_device	class_dev;
+};
+
+#define	NETDEV_ALIGN		32
+#define	NETDEV_ALIGN_CONST	(NETDEV_ALIGN - 1)
+
+static inline void *netdev_priv(struct net_device *dev)
+{
+	return (char *)dev + ((sizeof(struct net_device)
+					+ NETDEV_ALIGN_CONST)
+				& ~NETDEV_ALIGN_CONST);
+}
+
+#define SET_MODULE_OWNER(dev) do { } while (0)
+/* Set the sysfs physical device reference for the network logical device
+ * if set prior to registration will cause a symlink during initialization.
+ */
+#define SET_NETDEV_DEV(net, pdev)	((net)->class_dev.dev = (pdev))
+
+struct packet_type {
+	unsigned short		type;	/* This is really htons(ether_type).	*/
+	struct net_device		*dev;	/* NULL is wildcarded here		*/
+	int			(*func) (struct sk_buff *, struct net_device *,
+					 struct packet_type *);
+	void			*af_packet_priv;
+	struct list_head	list;
+};
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+
+extern struct net_device		loopback_dev;		/* The loopback */
+extern struct net_device		*dev_base;		/* All devices */
+extern rwlock_t				dev_base_lock;		/* Device list lock */
+
+extern int 			netdev_boot_setup_check(struct net_device *dev);
+extern unsigned long		netdev_boot_base(const char *prefix, int unit);
+extern struct net_device    *dev_getbyhwaddr(unsigned short type, char *hwaddr);
+extern struct net_device *dev_getfirstbyhwtype(unsigned short type);
+extern void		dev_add_pack(struct packet_type *pt);
+extern void		dev_remove_pack(struct packet_type *pt);
+extern void		__dev_remove_pack(struct packet_type *pt);
+
+extern struct net_device	*dev_get_by_flags(unsigned short flags,
+						  unsigned short mask);
+extern struct net_device	*dev_get_by_name(const char *name);
+extern struct net_device	*__dev_get_by_name(const char *name);
+extern int		dev_alloc_name(struct net_device *dev, const char *name);
+extern int		dev_open(struct net_device *dev);
+extern int		dev_close(struct net_device *dev);
+extern int		dev_queue_xmit(struct sk_buff *skb);
+extern int		register_netdevice(struct net_device *dev);
+extern int		unregister_netdevice(struct net_device *dev);
+extern void		free_netdev(struct net_device *dev);
+extern void		synchronize_net(void);
+extern int 		register_netdevice_notifier(struct notifier_block *nb);
+extern int		unregister_netdevice_notifier(struct notifier_block *nb);
+extern int		call_netdevice_notifiers(unsigned long val, void *v);
+extern struct net_device	*dev_get_by_index(int ifindex);
+extern struct net_device	*__dev_get_by_index(int ifindex);
+extern int		dev_restart(struct net_device *dev);
+#ifdef CONFIG_NETPOLL_TRAP
+extern int		netpoll_trap(void);
+#endif
+
+typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, int len);
+extern int		register_gifconf(unsigned int family, gifconf_func_t * gifconf);
+static inline int unregister_gifconf(unsigned int family)
+{
+	return register_gifconf(family, NULL);
+}
+
+/*
+ * Incoming packets are placed on per-cpu queues so that
+ * no locking is needed.
+ */
+
+struct softnet_data
+{
+	int			throttle;
+	int			cng_level;
+	int			avg_blog;
+	struct sk_buff_head	input_pkt_queue;
+	struct list_head	poll_list;
+	struct net_device	*output_queue;
+	struct sk_buff		*completion_queue;
+
+	struct net_device	backlog_dev;	/* Sorry. 8) */
+};
+
+DECLARE_PER_CPU(struct softnet_data,softnet_data);
+
+#define HAVE_NETIF_QUEUE
+
+static inline void __netif_schedule(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) {
+		unsigned long flags;
+		struct softnet_data *sd;
+
+		local_irq_save(flags);
+		sd = &__get_cpu_var(softnet_data);
+		dev->next_sched = sd->output_queue;
+		sd->output_queue = dev;
+		raise_softirq_irqoff(NET_TX_SOFTIRQ);
+		local_irq_restore(flags);
+	}
+}
+
+static inline void netif_schedule(struct net_device *dev)
+{
+	if (!test_bit(__LINK_STATE_XOFF, &dev->state))
+		__netif_schedule(dev);
+}
+
+static inline void netif_start_queue(struct net_device *dev)
+{
+	clear_bit(__LINK_STATE_XOFF, &dev->state);
+}
+
+static inline void netif_wake_queue(struct net_device *dev)
+{
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state))
+		__netif_schedule(dev);
+}
+
+static inline void netif_stop_queue(struct net_device *dev)
+{
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	set_bit(__LINK_STATE_XOFF, &dev->state);
+}
+
+static inline int netif_queue_stopped(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_XOFF, &dev->state);
+}
+
+static inline int netif_running(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_START, &dev->state);
+}
+
+
+/* Use this variant when it is known for sure that it
+ * is executing from interrupt context.
+ */
+static inline void dev_kfree_skb_irq(struct sk_buff *skb)
+{
+	if (atomic_dec_and_test(&skb->users)) {
+		struct softnet_data *sd;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		sd = &__get_cpu_var(softnet_data);
+		skb->next = sd->completion_queue;
+		sd->completion_queue = skb;
+		raise_softirq_irqoff(NET_TX_SOFTIRQ);
+		local_irq_restore(flags);
+	}
+}
+
+/* Use this variant in places where it could be invoked
+ * either from interrupt or non-interrupt context.
+ */
+static inline void dev_kfree_skb_any(struct sk_buff *skb)
+{
+	if (in_irq() || irqs_disabled())
+		dev_kfree_skb_irq(skb);
+	else
+		dev_kfree_skb(skb);
+}
+
+#define HAVE_NETIF_RX 1
+extern int		netif_rx(struct sk_buff *skb);
+extern int		netif_rx_ni(struct sk_buff *skb);
+#define HAVE_NETIF_RECEIVE_SKB 1
+extern int		netif_receive_skb(struct sk_buff *skb);
+extern int		dev_ioctl(unsigned int cmd, void __user *);
+extern int		dev_ethtool(struct ifreq *);
+extern unsigned		dev_get_flags(const struct net_device *);
+extern int		dev_change_flags(struct net_device *, unsigned);
+extern int		dev_change_name(struct net_device *, char *);
+extern int		dev_set_mtu(struct net_device *, int);
+extern int		dev_set_mac_address(struct net_device *,
+					    struct sockaddr *);
+extern void		dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev);
+
+extern void		dev_init(void);
+
+extern int		netdev_nit;
+
+/* Called by rtnetlink.c:rtnl_unlock() */
+extern void netdev_run_todo(void);
+
+static inline void dev_put(struct net_device *dev)
+{
+	atomic_dec(&dev->refcnt);
+}
+
+#define __dev_put(dev) atomic_dec(&(dev)->refcnt)
+#define dev_hold(dev) atomic_inc(&(dev)->refcnt)
+
+/* Carrier loss detection, dial on demand. The functions netif_carrier_on
+ * and _off may be called from IRQ context, but it is caller
+ * who is responsible for serialization of these calls.
+ */
+
+extern void linkwatch_fire_event(struct net_device *dev);
+
+static inline int netif_carrier_ok(const struct net_device *dev)
+{
+	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
+}
+
+extern void __netdev_watchdog_up(struct net_device *dev);
+
+static inline void netif_carrier_on(struct net_device *dev)
+{
+	if (test_and_clear_bit(__LINK_STATE_NOCARRIER, &dev->state))
+		linkwatch_fire_event(dev);
+	if (netif_running(dev))
+		__netdev_watchdog_up(dev);
+}
+
+static inline void netif_carrier_off(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_NOCARRIER, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/* Hot-plugging. */
+static inline int netif_device_present(struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_PRESENT, &dev->state);
+}
+
+static inline void netif_device_detach(struct net_device *dev)
+{
+	if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
+	    netif_running(dev)) {
+		netif_stop_queue(dev);
+	}
+}
+
+static inline void netif_device_attach(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
+	    netif_running(dev)) {
+		netif_wake_queue(dev);
+ 		__netdev_watchdog_up(dev);
+	}
+}
+
+/*
+ * Network interface message level settings
+ */
+#define HAVE_NETIF_MSG 1
+
+enum {
+	NETIF_MSG_DRV		= 0x0001,
+	NETIF_MSG_PROBE		= 0x0002,
+	NETIF_MSG_LINK		= 0x0004,
+	NETIF_MSG_TIMER		= 0x0008,
+	NETIF_MSG_IFDOWN	= 0x0010,
+	NETIF_MSG_IFUP		= 0x0020,
+	NETIF_MSG_RX_ERR	= 0x0040,
+	NETIF_MSG_TX_ERR	= 0x0080,
+	NETIF_MSG_TX_QUEUED	= 0x0100,
+	NETIF_MSG_INTR		= 0x0200,
+	NETIF_MSG_TX_DONE	= 0x0400,
+	NETIF_MSG_RX_STATUS	= 0x0800,
+	NETIF_MSG_PKTDATA	= 0x1000,
+	NETIF_MSG_HW		= 0x2000,
+	NETIF_MSG_WOL		= 0x4000,
+};
+
+#define netif_msg_drv(p)	((p)->msg_enable & NETIF_MSG_DRV)
+#define netif_msg_probe(p)	((p)->msg_enable & NETIF_MSG_PROBE)
+#define netif_msg_link(p)	((p)->msg_enable & NETIF_MSG_LINK)
+#define netif_msg_timer(p)	((p)->msg_enable & NETIF_MSG_TIMER)
+#define netif_msg_ifdown(p)	((p)->msg_enable & NETIF_MSG_IFDOWN)
+#define netif_msg_ifup(p)	((p)->msg_enable & NETIF_MSG_IFUP)
+#define netif_msg_rx_err(p)	((p)->msg_enable & NETIF_MSG_RX_ERR)
+#define netif_msg_tx_err(p)	((p)->msg_enable & NETIF_MSG_TX_ERR)
+#define netif_msg_tx_queued(p)	((p)->msg_enable & NETIF_MSG_TX_QUEUED)
+#define netif_msg_intr(p)	((p)->msg_enable & NETIF_MSG_INTR)
+#define netif_msg_tx_done(p)	((p)->msg_enable & NETIF_MSG_TX_DONE)
+#define netif_msg_rx_status(p)	((p)->msg_enable & NETIF_MSG_RX_STATUS)
+#define netif_msg_pktdata(p)	((p)->msg_enable & NETIF_MSG_PKTDATA)
+#define netif_msg_hw(p)		((p)->msg_enable & NETIF_MSG_HW)
+#define netif_msg_wol(p)	((p)->msg_enable & NETIF_MSG_WOL)
+
+static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
+{
+	/* use default */
+	if (debug_value < 0 || debug_value >= (sizeof(u32) * 8))
+		return default_msg_enable_bits;
+	if (debug_value == 0)	/* no output */
+		return 0;
+	/* set low N bits */
+	return (1 << debug_value) - 1;
+}
+
+/* Schedule rx intr now? */
+
+static inline int netif_rx_schedule_prep(struct net_device *dev)
+{
+	return netif_running(dev) &&
+		!test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/* Add interface to tail of rx poll list. This assumes that _prep has
+ * already been called and returned 1.
+ */
+
+static inline void __netif_rx_schedule(struct net_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	dev_hold(dev);
+	list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
+	if (dev->quota < 0)
+		dev->quota += dev->weight;
+	else
+		dev->quota = dev->weight;
+	__raise_softirq_irqoff(NET_RX_SOFTIRQ);
+	local_irq_restore(flags);
+}
+
+/* Try to reschedule poll. Called by irq handler. */
+
+static inline void netif_rx_schedule(struct net_device *dev)
+{
+	if (netif_rx_schedule_prep(dev))
+		__netif_rx_schedule(dev);
+}
+
+/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().
+ * Do not inline this?
+ */
+static inline int netif_rx_reschedule(struct net_device *dev, int undo)
+{
+	if (netif_rx_schedule_prep(dev)) {
+		unsigned long flags;
+
+		dev->quota += undo;
+
+		local_irq_save(flags);
+		list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
+		__raise_softirq_irqoff(NET_RX_SOFTIRQ);
+		local_irq_restore(flags);
+		return 1;
+	}
+	return 0;
+}
+
+/* Remove interface from poll list: it must be in the poll list
+ * on current cpu. This primitive is called by dev->poll(), when
+ * it completes the work. The device cannot be out of poll list at this
+ * moment, it is BUG().
+ */
+static inline void netif_rx_complete(struct net_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	BUG_ON(!test_bit(__LINK_STATE_RX_SCHED, &dev->state));
+	list_del(&dev->poll_list);
+	smp_mb__before_clear_bit();
+	clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
+	local_irq_restore(flags);
+}
+
+static inline void netif_poll_disable(struct net_device *dev)
+{
+	while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) {
+		/* No hurry. */
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(1);
+	}
+}
+
+static inline void netif_poll_enable(struct net_device *dev)
+{
+	clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/* same as netif_rx_complete, except that local_irq_save(flags)
+ * has already been issued
+ */
+static inline void __netif_rx_complete(struct net_device *dev)
+{
+	BUG_ON(!test_bit(__LINK_STATE_RX_SCHED, &dev->state));
+	list_del(&dev->poll_list);
+	smp_mb__before_clear_bit();
+	clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+static inline void netif_tx_disable(struct net_device *dev)
+{
+	spin_lock_bh(&dev->xmit_lock);
+	netif_stop_queue(dev);
+	spin_unlock_bh(&dev->xmit_lock);
+}
+
+/* These functions live elsewhere (drivers/net/net_init.c, but related) */
+
+extern void		ether_setup(struct net_device *dev);
+
+/* Support for loadable net-drivers */
+extern struct net_device *alloc_netdev(int sizeof_priv, const char *name,
+				       void (*setup)(struct net_device *));
+extern int		register_netdev(struct net_device *dev);
+extern void		unregister_netdev(struct net_device *dev);
+/* Functions used for multicast support */
+extern void		dev_mc_upload(struct net_device *dev);
+extern int 		dev_mc_delete(struct net_device *dev, void *addr, int alen, int all);
+extern int		dev_mc_add(struct net_device *dev, void *addr, int alen, int newonly);
+extern void		dev_mc_discard(struct net_device *dev);
+extern void		dev_set_promiscuity(struct net_device *dev, int inc);
+extern void		dev_set_allmulti(struct net_device *dev, int inc);
+extern void		netdev_state_change(struct net_device *dev);
+/* Load a device via the kmod */
+extern void		dev_load(const char *name);
+extern void		dev_mcast_init(void);
+extern int		netdev_max_backlog;
+extern int		weight_p;
+extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
+extern int skb_checksum_help(struct sk_buff *skb, int inward);
+/* rx skb timestamps */
+extern void		net_enable_timestamp(void);
+extern void		net_disable_timestamp(void);
+
+#ifdef CONFIG_SYSCTL
+extern char *net_sysctl_strdup(const char *s);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif	/* _LINUX_DEV_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
new file mode 100644
index 000000000000..2e2045482cb1
--- /dev/null
+++ b/include/linux/netfilter.h
@@ -0,0 +1,199 @@
+#ifndef __LINUX_NETFILTER_H
+#define __LINUX_NETFILTER_H
+
+#ifdef __KERNEL__
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <linux/if.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#endif
+#include <linux/compiler.h>
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* Generic cache responses from hook functions.
+   <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#ifdef CONFIG_NETFILTER
+
+extern void netfilter_init(void);
+
+/* Largest hook number + 1 */
+#define NF_MAX_HOOKS 8
+
+struct sk_buff;
+struct net_device;
+
+typedef unsigned int nf_hookfn(unsigned int hooknum,
+			       struct sk_buff **skb,
+			       const struct net_device *in,
+			       const struct net_device *out,
+			       int (*okfn)(struct sk_buff *));
+
+struct nf_hook_ops
+{
+	struct list_head list;
+
+	/* User fills in from here down. */
+	nf_hookfn *hook;
+	struct module *owner;
+	int pf;
+	int hooknum;
+	/* Hooks are ordered in ascending priority. */
+	int priority;
+};
+
+struct nf_sockopt_ops
+{
+	struct list_head list;
+
+	int pf;
+
+	/* Non-inclusive ranges: use 0/0/NULL to never get called. */
+	int set_optmin;
+	int set_optmax;
+	int (*set)(struct sock *sk, int optval, void __user *user, unsigned int len);
+
+	int get_optmin;
+	int get_optmax;
+	int (*get)(struct sock *sk, int optval, void __user *user, int *len);
+
+	/* Number of users inside set() or get(). */
+	unsigned int use;
+	struct task_struct *cleanup_task;
+};
+
+/* Each queued (to userspace) skbuff has one of these. */
+struct nf_info
+{
+	/* The ops struct which sent us to userspace. */
+	struct nf_hook_ops *elem;
+	
+	/* If we're sent to userspace, this keeps housekeeping info */
+	int pf;
+	unsigned int hook;
+	struct net_device *indev, *outdev;
+	int (*okfn)(struct sk_buff *);
+};
+                                                                                
+/* Function to register/unregister hook points. */
+int nf_register_hook(struct nf_hook_ops *reg);
+void nf_unregister_hook(struct nf_hook_ops *reg);
+
+/* Functions to register get/setsockopt ranges (non-inclusive).  You
+   need to check permissions yourself! */
+int nf_register_sockopt(struct nf_sockopt_ops *reg);
+void nf_unregister_sockopt(struct nf_sockopt_ops *reg);
+
+extern struct list_head nf_hooks[NPROTO][NF_MAX_HOOKS];
+
+typedef void nf_logfn(unsigned int hooknum,
+		      const struct sk_buff *skb,
+		      const struct net_device *in,
+		      const struct net_device *out,
+		      const char *prefix);
+
+/* Function to register/unregister log function. */
+int nf_log_register(int pf, nf_logfn *logfn);
+void nf_log_unregister(int pf, nf_logfn *logfn);
+
+/* Calls the registered backend logging function */
+void nf_log_packet(int pf,
+		   unsigned int hooknum,
+		   const struct sk_buff *skb,
+		   const struct net_device *in,
+		   const struct net_device *out,
+		   const char *fmt, ...);
+                   
+/* Activate hook; either okfn or kfree_skb called, unless a hook
+   returns NF_STOLEN (in which case, it's up to the hook to deal with
+   the consequences).
+
+   Returns -ERRNO if packet dropped.  Zero means queued, stolen or
+   accepted.
+*/
+
+/* RR:
+   > I don't want nf_hook to return anything because people might forget
+   > about async and trust the return value to mean "packet was ok".
+
+   AK:
+   Just document it clearly, then you can expect some sense from kernel
+   coders :)
+*/
+
+/* This is gross, but inline doesn't cut it for avoiding the function
+   call in fast path: gcc doesn't inline (needs value tracking?). --RR */
+#ifdef CONFIG_NETFILTER_DEBUG
+#define NF_HOOK(pf, hook, skb, indev, outdev, okfn)			       \
+({int __ret;								       \
+if ((__ret=nf_hook_slow(pf, hook, &(skb), indev, outdev, okfn, INT_MIN)) == 1) \
+	__ret = (okfn)(skb);						       \
+__ret;})
+#define NF_HOOK_THRESH(pf, hook, skb, indev, outdev, okfn, thresh)	       \
+({int __ret;								       \
+if ((__ret=nf_hook_slow(pf, hook, &(skb), indev, outdev, okfn, thresh)) == 1)  \
+	__ret = (okfn)(skb);						       \
+__ret;})
+#else
+#define NF_HOOK(pf, hook, skb, indev, outdev, okfn)			       \
+({int __ret;								       \
+if (list_empty(&nf_hooks[pf][hook]) ||					       \
+    (__ret=nf_hook_slow(pf, hook, &(skb), indev, outdev, okfn, INT_MIN)) == 1) \
+	__ret = (okfn)(skb);						       \
+__ret;})
+#define NF_HOOK_THRESH(pf, hook, skb, indev, outdev, okfn, thresh)	       \
+({int __ret;								       \
+if (list_empty(&nf_hooks[pf][hook]) ||					       \
+    (__ret=nf_hook_slow(pf, hook, &(skb), indev, outdev, okfn, thresh)) == 1)  \
+	__ret = (okfn)(skb);						       \
+__ret;})
+#endif
+
+int nf_hook_slow(int pf, unsigned int hook, struct sk_buff **pskb,
+		 struct net_device *indev, struct net_device *outdev,
+		 int (*okfn)(struct sk_buff *), int thresh);
+
+/* Call setsockopt() */
+int nf_setsockopt(struct sock *sk, int pf, int optval, char __user *opt, 
+		  int len);
+int nf_getsockopt(struct sock *sk, int pf, int optval, char __user *opt,
+		  int *len);
+
+/* Packet queuing */
+typedef int (*nf_queue_outfn_t)(struct sk_buff *skb, 
+                                struct nf_info *info, void *data);
+extern int nf_register_queue_handler(int pf, 
+                                     nf_queue_outfn_t outfn, void *data);
+extern int nf_unregister_queue_handler(int pf);
+extern void nf_reinject(struct sk_buff *skb,
+			struct nf_info *info,
+			unsigned int verdict);
+
+extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *);
+extern void nf_ct_attach(struct sk_buff *, struct sk_buff *);
+
+/* FIXME: Before cache is ever used, this must be implemented for real. */
+extern void nf_invalidate_cache(int pf);
+
+#else /* !CONFIG_NETFILTER */
+#define NF_HOOK(pf, hook, skb, indev, outdev, okfn) (okfn)(skb)
+static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
+#endif /*CONFIG_NETFILTER*/
+
+#endif /*__KERNEL__*/
+#endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_arp.h b/include/linux/netfilter_arp.h
new file mode 100644
index 000000000000..a3f8977f7f12
--- /dev/null
+++ b/include/linux/netfilter_arp.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_ARP_NETFILTER_H
+#define __LINUX_ARP_NETFILTER_H
+
+/* ARP-specific defines for netfilter.
+ * (C)2002 Rusty Russell IBM -- This code is GPL.
+ */
+
+#include <linux/config.h>
+#include <linux/netfilter.h>
+
+/* There is no PF_ARP. */
+#define NF_ARP		0
+
+/* ARP Hooks */
+#define NF_ARP_IN	0
+#define NF_ARP_OUT	1
+#define NF_ARP_FORWARD	2
+#define NF_ARP_NUMHOOKS	3
+
+#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
new file mode 100644
index 000000000000..d759a637bded
--- /dev/null
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -0,0 +1,340 @@
+/*
+ * 	Format of an ARP firewall descriptor
+ *
+ * 	src, tgt, src_mask, tgt_mask, arpop, arpop_mask are always stored in
+ *	network byte order.
+ * 	flags are stored in host byte order (of course).
+ */
+
+#ifndef _ARPTABLES_H
+#define _ARPTABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/netfilter_arp.h>
+
+#define ARPT_FUNCTION_MAXNAMELEN 30
+#define ARPT_TABLE_MAXNAMELEN 32
+
+#define ARPT_DEV_ADDR_LEN_MAX 16
+
+struct arpt_devaddr_info {
+	char addr[ARPT_DEV_ADDR_LEN_MAX];
+	char mask[ARPT_DEV_ADDR_LEN_MAX];
+};
+
+/* Yes, Virginia, you have to zero the padding. */
+struct arpt_arp {
+	/* Source and target IP addr */
+	struct in_addr src, tgt;
+	/* Mask for src and target IP addr */
+	struct in_addr smsk, tmsk;
+
+	/* Device hw address length, src+target device addresses */
+	u_int8_t arhln, arhln_mask;
+	struct arpt_devaddr_info src_devaddr;
+	struct arpt_devaddr_info tgt_devaddr;
+
+	/* ARP operation code. */
+	u_int16_t arpop, arpop_mask;
+
+	/* ARP hardware address and protocol address format. */
+	u_int16_t arhrd, arhrd_mask;
+	u_int16_t arpro, arpro_mask;
+
+	/* The protocol address length is only accepted if it is 4
+	 * so there is no use in offering a way to do filtering on it.
+	 */
+
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* Flags word */
+	u_int8_t flags;
+	/* Inverse flags */
+	u_int16_t invflags;
+};
+
+struct arpt_entry_target
+{
+	union {
+		struct {
+			u_int16_t target_size;
+
+			/* Used by userspace */
+			char name[ARPT_FUNCTION_MAXNAMELEN];
+		} user;
+		struct {
+			u_int16_t target_size;
+
+			/* Used inside the kernel */
+			struct arpt_target *target;
+		} kernel;
+
+		/* Total length */
+		u_int16_t target_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct arpt_standard_target
+{
+	struct arpt_entry_target target;
+	int verdict;
+};
+
+struct arpt_counters
+{
+	u_int64_t pcnt, bcnt;			/* Packet and byte counters */
+};
+
+/* Values for "flag" field in struct arpt_ip (general arp structure).
+ * No flags defined yet.
+ */
+#define ARPT_F_MASK		0x00	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct arpt_arp. */
+#define ARPT_INV_VIA_IN		0x0001	/* Invert the sense of IN IFACE. */
+#define ARPT_INV_VIA_OUT	0x0002	/* Invert the sense of OUT IFACE */
+#define ARPT_INV_SRCIP		0x0004	/* Invert the sense of SRC IP. */
+#define ARPT_INV_TGTIP		0x0008	/* Invert the sense of TGT IP. */
+#define ARPT_INV_SRCDEVADDR	0x0010	/* Invert the sense of SRC DEV ADDR. */
+#define ARPT_INV_TGTDEVADDR	0x0020	/* Invert the sense of TGT DEV ADDR. */
+#define ARPT_INV_ARPOP		0x0040	/* Invert the sense of ARP OP. */
+#define ARPT_INV_ARPHRD		0x0080	/* Invert the sense of ARP HRD. */
+#define ARPT_INV_ARPPRO		0x0100	/* Invert the sense of ARP PRO. */
+#define ARPT_INV_ARPHLN		0x0200	/* Invert the sense of ARP HLN. */
+#define ARPT_INV_MASK		0x03FF	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general ARP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct arpt_entry
+{
+	struct arpt_arp arp;
+
+	/* Size of arpt_entry + matches */
+	u_int16_t target_offset;
+	/* Size of arpt_entry + matches + target */
+	u_int16_t next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct arpt_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use a raw
+ * socket for this. Instead we check rights in the calls.
+ */
+#define ARPT_BASE_CTL		96	/* base for firewall socket options */
+
+#define ARPT_SO_SET_REPLACE		(ARPT_BASE_CTL)
+#define ARPT_SO_SET_ADD_COUNTERS	(ARPT_BASE_CTL + 1)
+#define ARPT_SO_SET_MAX			ARPT_SO_SET_ADD_COUNTERS
+
+#define ARPT_SO_GET_INFO		(ARPT_BASE_CTL)
+#define ARPT_SO_GET_ENTRIES		(ARPT_BASE_CTL + 1)
+#define ARPT_SO_GET_MAX			ARPT_SO_GET_ENTRIES
+
+/* CONTINUE verdict for targets */
+#define ARPT_CONTINUE 0xFFFFFFFF
+
+/* For standard target */
+#define ARPT_RETURN (-NF_REPEAT - 1)
+
+/* The argument to ARPT_SO_GET_INFO */
+struct arpt_getinfo
+{
+	/* Which table: caller fills this in. */
+	char name[ARPT_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_ARP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_ARP_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to ARPT_SO_SET_REPLACE. */
+struct arpt_replace
+{
+	/* Which table. */
+	char name[ARPT_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_ARP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_ARP_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct arpt_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct arpt_entry entries[0];
+};
+
+/* The argument to ARPT_SO_ADD_COUNTERS. */
+struct arpt_counters_info
+{
+	/* Which table. */
+	char name[ARPT_TABLE_MAXNAMELEN];
+
+	unsigned int num_counters;
+
+	/* The counters (actually `number' of these). */
+	struct arpt_counters counters[0];
+};
+
+/* The argument to ARPT_SO_GET_ENTRIES. */
+struct arpt_get_entries
+{
+	/* Which table: user fills this in. */
+	char name[ARPT_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct arpt_entry entrytable[0];
+};
+
+/* Standard return verdict, or do jump. */
+#define ARPT_STANDARD_TARGET ""
+/* Error verdict. */
+#define ARPT_ERROR_TARGET "ERROR"
+
+/* Helper functions */
+static __inline__ struct arpt_entry_target *arpt_get_target(struct arpt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/* fn returns 0 to continue iteration */
+#define ARPT_ENTRY_ITERATE(entries, size, fn, args...)		\
+({								\
+	unsigned int __i;					\
+	int __ret = 0;						\
+	struct arpt_entry *__entry;				\
+								\
+	for (__i = 0; __i < (size); __i += __entry->next_offset) { \
+		__entry = (void *)(entries) + __i;		\
+								\
+		__ret = fn(__entry , ## args);			\
+		if (__ret != 0)					\
+			break;					\
+	}							\
+	__ret;							\
+})
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+#ifdef __KERNEL__
+
+/* Registration hooks for targets. */
+struct arpt_target
+{
+	struct list_head list;
+
+	const char name[ARPT_FUNCTION_MAXNAMELEN];
+
+	/* Returns verdict. */
+	unsigned int (*target)(struct sk_buff **pskb,
+			       unsigned int hooknum,
+			       const struct net_device *in,
+			       const struct net_device *out,
+			       const void *targinfo,
+			       void *userdata);
+
+	/* Called when user tries to insert an entry of this type:
+           hook_mask is a bitmask of hooks from which it can be
+           called. */
+	/* Should return true or false. */
+	int (*checkentry)(const char *tablename,
+			  const struct arpt_entry *e,
+			  void *targinfo,
+			  unsigned int targinfosize,
+			  unsigned int hook_mask);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(void *targinfo, unsigned int targinfosize);
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+extern int arpt_register_target(struct arpt_target *target);
+extern void arpt_unregister_target(struct arpt_target *target);
+
+/* Furniture shopping... */
+struct arpt_table
+{
+	struct list_head list;
+
+	/* A unique name... */
+	char name[ARPT_TABLE_MAXNAMELEN];
+
+	/* What hooks you will enter on */
+	unsigned int valid_hooks;
+
+	/* Lock for the curtain */
+	rwlock_t lock;
+
+	/* Man behind the curtain... */
+	struct arpt_table_info *private;
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+extern int arpt_register_table(struct arpt_table *table,
+			       const struct arpt_replace *repl);
+extern void arpt_unregister_table(struct arpt_table *table);
+extern unsigned int arpt_do_table(struct sk_buff **pskb,
+				  unsigned int hook,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  struct arpt_table *table,
+				  void *userdata);
+
+#define ARPT_ALIGN(s) (((s) + (__alignof__(struct arpt_entry)-1)) & ~(__alignof__(struct arpt_entry)-1))
+#endif /*__KERNEL__*/
+#endif /* _ARPTABLES_H */
diff --git a/include/linux/netfilter_arp/arpt_mangle.h b/include/linux/netfilter_arp/arpt_mangle.h
new file mode 100644
index 000000000000..250f502902bb
--- /dev/null
+++ b/include/linux/netfilter_arp/arpt_mangle.h
@@ -0,0 +1,26 @@
+#ifndef _ARPT_MANGLE_H
+#define _ARPT_MANGLE_H
+#include <linux/netfilter_arp/arp_tables.h>
+
+#define ARPT_MANGLE_ADDR_LEN_MAX sizeof(struct in_addr)
+struct arpt_mangle
+{
+	char src_devaddr[ARPT_DEV_ADDR_LEN_MAX];
+	char tgt_devaddr[ARPT_DEV_ADDR_LEN_MAX];
+	union {
+		struct in_addr src_ip;
+	} u_s;
+	union {
+		struct in_addr tgt_ip;
+	} u_t;
+	u_int8_t flags;
+	int target;
+};
+
+#define ARPT_MANGLE_SDEV 0x01
+#define ARPT_MANGLE_TDEV 0x02
+#define ARPT_MANGLE_SIP 0x04
+#define ARPT_MANGLE_TIP 0x08
+#define ARPT_MANGLE_MASK 0x0f
+
+#endif /* _ARPT_MANGLE_H */
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
new file mode 100644
index 000000000000..de4d397865ce
--- /dev/null
+++ b/include/linux/netfilter_bridge.h
@@ -0,0 +1,113 @@
+#ifndef __LINUX_BRIDGE_NETFILTER_H
+#define __LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter. 
+ */
+
+#include <linux/config.h>
+#include <linux/netfilter.h>
+#if defined(__KERNEL__) && defined(CONFIG_BRIDGE_NETFILTER)
+#include <asm/atomic.h>
+#include <linux/if_ether.h>
+#endif
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING	4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING		5
+#define NF_BR_NUMHOOKS		6
+
+#ifdef __KERNEL__
+
+enum nf_br_hook_priorities {
+	NF_BR_PRI_FIRST = INT_MIN,
+	NF_BR_PRI_NAT_DST_BRIDGED = -300,
+	NF_BR_PRI_FILTER_BRIDGED = -200,
+	NF_BR_PRI_BRNF = 0,
+	NF_BR_PRI_NAT_DST_OTHER = 100,
+	NF_BR_PRI_FILTER_OTHER = 200,
+	NF_BR_PRI_NAT_SRC = 300,
+	NF_BR_PRI_LAST = INT_MAX,
+};
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+
+#define BRNF_PKT_TYPE			0x01
+#define BRNF_BRIDGED_DNAT		0x02
+#define BRNF_DONT_TAKE_PARENT		0x04
+#define BRNF_BRIDGED			0x08
+#define BRNF_NF_BRIDGE_PREROUTING	0x10
+
+static inline
+struct nf_bridge_info *nf_bridge_alloc(struct sk_buff *skb)
+{
+	struct nf_bridge_info **nf_bridge = &(skb->nf_bridge);
+
+	if ((*nf_bridge = kmalloc(sizeof(**nf_bridge), GFP_ATOMIC)) != NULL) {
+		atomic_set(&(*nf_bridge)->use, 1);
+		(*nf_bridge)->mask = 0;
+		(*nf_bridge)->physindev = (*nf_bridge)->physoutdev = NULL;
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+		(*nf_bridge)->netoutdev = NULL;
+#endif
+	}
+
+	return *nf_bridge;
+}
+
+/* Only used in br_forward.c */
+static inline
+void nf_bridge_maybe_copy_header(struct sk_buff *skb)
+{
+	if (skb->nf_bridge) {
+		if (skb->protocol == __constant_htons(ETH_P_8021Q)) {
+			memcpy(skb->data - 18, skb->nf_bridge->data, 18);
+			skb_push(skb, 4);
+		} else
+			memcpy(skb->data - 16, skb->nf_bridge->data, 16);
+	}
+}
+
+static inline
+void nf_bridge_save_header(struct sk_buff *skb)
+{
+        int header_size = 16;
+
+	if (skb->protocol == __constant_htons(ETH_P_8021Q))
+		header_size = 18;
+
+	memcpy(skb->nf_bridge->data, skb->data - header_size, header_size);
+}
+
+/* This is called by the IP fragmenting code and it ensures there is
+ * enough room for the encapsulating header (if there is one). */
+static inline
+int nf_bridge_pad(struct sk_buff *skb)
+{
+	if (skb->protocol == __constant_htons(ETH_P_IP))
+		return 0;
+	if (skb->nf_bridge) {
+		if (skb->protocol == __constant_htons(ETH_P_8021Q))
+			return 4;
+	}
+	return 0;
+}
+
+struct bridge_skb_cb {
+	union {
+		__u32 ipv4;
+	} daddr;
+};
+#endif /* CONFIG_BRIDGE_NETFILTER */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_802_3.h b/include/linux/netfilter_bridge/ebt_802_3.h
new file mode 100644
index 000000000000..b9f712c14a0a
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_802_3.h
@@ -0,0 +1,69 @@
+#ifndef __LINUX_BRIDGE_EBT_802_3_H
+#define __LINUX_BRIDGE_EBT_802_3_H
+
+#define EBT_802_3_SAP 0x01
+#define EBT_802_3_TYPE 0x02
+
+#define EBT_802_3_MATCH "802_3"
+
+/*
+ * If frame has DSAP/SSAP value 0xaa you must check the SNAP type
+ * to discover what kind of packet we're carrying. 
+ */
+#define CHECK_TYPE 0xaa
+
+/*
+ * Control field may be one or two bytes.  If the first byte has
+ * the value 0x03 then the entire length is one byte, otherwise it is two.
+ * One byte controls are used in Unnumbered Information frames.
+ * Two byte controls are used in Numbered Information frames.
+ */
+#define IS_UI 0x03
+
+#define EBT_802_3_MASK (EBT_802_3_SAP | EBT_802_3_TYPE | EBT_802_3)
+
+/* ui has one byte ctrl, ni has two */
+struct hdr_ui {
+	uint8_t dsap;
+	uint8_t ssap;
+	uint8_t ctrl;
+	uint8_t orig[3];
+	uint16_t type;
+};
+
+struct hdr_ni {
+	uint8_t dsap;
+	uint8_t ssap;
+	uint16_t ctrl;
+	uint8_t  orig[3];
+	uint16_t type;
+};
+
+struct ebt_802_3_hdr {
+	uint8_t  daddr[6];
+	uint8_t  saddr[6];
+	uint16_t len;
+	union {
+		struct hdr_ui ui;
+		struct hdr_ni ni;
+	} llc;
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct ebt_802_3_hdr *ebt_802_3_hdr(const struct sk_buff *skb)
+{
+	return (struct ebt_802_3_hdr *)skb->mac.raw;
+}
+#endif
+
+struct ebt_802_3_info 
+{
+	uint8_t  sap;
+	uint16_t type;
+	uint8_t  bitmask;
+	uint8_t  invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_among.h b/include/linux/netfilter_bridge/ebt_among.h
new file mode 100644
index 000000000000..307c1fed8511
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_among.h
@@ -0,0 +1,65 @@
+#ifndef __LINUX_BRIDGE_EBT_AMONG_H
+#define __LINUX_BRIDGE_EBT_AMONG_H
+
+#define EBT_AMONG_DST 0x01
+#define EBT_AMONG_SRC 0x02
+
+/* Grzegorz Borowiak <grzes@gnu.univ.gda.pl> 2003
+ * 
+ * Write-once-read-many hash table, used for checking if a given
+ * MAC address belongs to a set or not and possibly for checking
+ * if it is related with a given IPv4 address.
+ *
+ * The hash value of an address is its last byte.
+ * 
+ * In real-world ethernet addresses, values of the last byte are
+ * evenly distributed and there is no need to consider other bytes.
+ * It would only slow the routines down.
+ *
+ * For MAC address comparison speedup reasons, we introduce a trick.
+ * MAC address is mapped onto an array of two 32-bit integers.
+ * This pair of integers is compared with MAC addresses in the
+ * hash table, which are stored also in form of pairs of integers
+ * (in `cmp' array). This is quick as it requires only two elementary
+ * number comparisons in worst case. Further, we take advantage of
+ * fact that entropy of 3 last bytes of address is larger than entropy
+ * of 3 first bytes. So first we compare 4 last bytes of addresses and
+ * if they are the same we compare 2 first.
+ *
+ * Yes, it is a memory overhead, but in 2003 AD, who cares?
+ */
+
+struct ebt_mac_wormhash_tuple
+{
+	uint32_t cmp[2];
+	uint32_t ip;
+};
+
+struct ebt_mac_wormhash
+{
+	int table[257];
+	int poolsize;
+	struct ebt_mac_wormhash_tuple pool[0];
+};
+
+#define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
+		+ (x)->poolsize * sizeof(struct ebt_mac_wormhash_tuple) : 0)
+
+struct ebt_among_info
+{
+	int wh_dst_ofs;
+	int wh_src_ofs;
+	int bitmask;
+};
+
+#define EBT_AMONG_DST_NEG 0x1
+#define EBT_AMONG_SRC_NEG 0x2
+
+#define ebt_among_wh_dst(x) ((x)->wh_dst_ofs ? \
+	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_dst_ofs) : NULL)
+#define ebt_among_wh_src(x) ((x)->wh_src_ofs ? \
+	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_src_ofs) : NULL)
+
+#define EBT_AMONG_MATCH "among"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_arp.h b/include/linux/netfilter_bridge/ebt_arp.h
new file mode 100644
index 000000000000..537ec6b487a2
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_arp.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_BRIDGE_EBT_ARP_H
+#define __LINUX_BRIDGE_EBT_ARP_H
+
+#define EBT_ARP_OPCODE 0x01
+#define EBT_ARP_HTYPE 0x02
+#define EBT_ARP_PTYPE 0x04
+#define EBT_ARP_SRC_IP 0x08
+#define EBT_ARP_DST_IP 0x10
+#define EBT_ARP_SRC_MAC 0x20
+#define EBT_ARP_DST_MAC 0x40
+#define EBT_ARP_MASK (EBT_ARP_OPCODE | EBT_ARP_HTYPE | EBT_ARP_PTYPE | \
+   EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_SRC_MAC | EBT_ARP_DST_MAC)
+#define EBT_ARP_MATCH "arp"
+
+struct ebt_arp_info
+{
+	uint16_t htype;
+	uint16_t ptype;
+	uint16_t opcode;
+	uint32_t saddr;
+	uint32_t smsk;
+	uint32_t daddr;
+	uint32_t dmsk;
+	unsigned char smaddr[ETH_ALEN];
+	unsigned char smmsk[ETH_ALEN];
+	unsigned char dmaddr[ETH_ALEN];
+	unsigned char dmmsk[ETH_ALEN];
+	uint8_t  bitmask;
+	uint8_t  invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_arpreply.h b/include/linux/netfilter_bridge/ebt_arpreply.h
new file mode 100644
index 000000000000..96a8339960e0
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_arpreply.h
@@ -0,0 +1,11 @@
+#ifndef __LINUX_BRIDGE_EBT_ARPREPLY_H
+#define __LINUX_BRIDGE_EBT_ARPREPLY_H
+
+struct ebt_arpreply_info
+{
+	unsigned char mac[ETH_ALEN];
+	int target;
+};
+#define EBT_ARPREPLY_TARGET "arpreply"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_ip.h b/include/linux/netfilter_bridge/ebt_ip.h
new file mode 100644
index 000000000000..7247385cdcb1
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ip.h
@@ -0,0 +1,43 @@
+/*
+ *  ebt_ip
+ *
+ *	Authors:
+ *	Bart De Schuymer <bart.de.schuymer@pandora.be>
+ *
+ *  April, 2002
+ *
+ *  Changes:
+ *    added ip-sport and ip-dport
+ *    Innominate Security Technologies AG <mhopf@innominate.com>
+ *    September, 2002
+ */
+
+#ifndef __LINUX_BRIDGE_EBT_IP_H
+#define __LINUX_BRIDGE_EBT_IP_H
+
+#define EBT_IP_SOURCE 0x01
+#define EBT_IP_DEST 0x02
+#define EBT_IP_TOS 0x04
+#define EBT_IP_PROTO 0x08
+#define EBT_IP_SPORT 0x10
+#define EBT_IP_DPORT 0x20
+#define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\
+ EBT_IP_SPORT | EBT_IP_DPORT )
+#define EBT_IP_MATCH "ip"
+
+/* the same values are used for the invflags */
+struct ebt_ip_info
+{
+	uint32_t saddr;
+	uint32_t daddr;
+	uint32_t smsk;
+	uint32_t dmsk;
+	uint8_t  tos;
+	uint8_t  protocol;
+	uint8_t  bitmask;
+	uint8_t  invflags;
+	uint16_t sport[2];
+	uint16_t dport[2];
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_limit.h b/include/linux/netfilter_bridge/ebt_limit.h
new file mode 100644
index 000000000000..d8b65000afe4
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_limit.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_BRIDGE_EBT_LIMIT_H
+#define __LINUX_BRIDGE_EBT_LIMIT_H
+
+#define EBT_LIMIT_MATCH "limit"
+
+/* timings are in milliseconds. */
+#define EBT_LIMIT_SCALE 10000
+
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+
+struct ebt_limit_info
+{
+	u_int32_t avg;    /* Average secs between packets * scale */
+	u_int32_t burst;  /* Period multiplier for upper limit. */
+
+	/* Used internally by the kernel */
+	unsigned long prev;
+	u_int32_t credit;
+	u_int32_t credit_cap, cost;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
new file mode 100644
index 000000000000..358fbc84fb59
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -0,0 +1,17 @@
+#ifndef __LINUX_BRIDGE_EBT_LOG_H
+#define __LINUX_BRIDGE_EBT_LOG_H
+
+#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
+#define EBT_LOG_ARP 0x02
+#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
+#define EBT_LOG_PREFIX_SIZE 30
+#define EBT_LOG_WATCHER "log"
+
+struct ebt_log_info
+{
+	uint8_t loglevel;
+	uint8_t prefix[EBT_LOG_PREFIX_SIZE];
+	uint32_t bitmask;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_mark_m.h b/include/linux/netfilter_bridge/ebt_mark_m.h
new file mode 100644
index 000000000000..301524ff1065
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_mark_m.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_BRIDGE_EBT_MARK_M_H
+#define __LINUX_BRIDGE_EBT_MARK_M_H
+
+#define EBT_MARK_AND 0x01
+#define EBT_MARK_OR 0x02
+#define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
+struct ebt_mark_m_info
+{
+	unsigned long mark, mask;
+	uint8_t invert;
+	uint8_t bitmask;
+};
+#define EBT_MARK_MATCH "mark_m"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_mark_t.h b/include/linux/netfilter_bridge/ebt_mark_t.h
new file mode 100644
index 000000000000..110fec6a40a2
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_mark_t.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_BRIDGE_EBT_MARK_T_H
+#define __LINUX_BRIDGE_EBT_MARK_T_H
+
+struct ebt_mark_t_info
+{
+	unsigned long mark;
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_MARK_TARGET "mark"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_nat.h b/include/linux/netfilter_bridge/ebt_nat.h
new file mode 100644
index 000000000000..26fd90da4cd6
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_nat.h
@@ -0,0 +1,13 @@
+#ifndef __LINUX_BRIDGE_EBT_NAT_H
+#define __LINUX_BRIDGE_EBT_NAT_H
+
+struct ebt_nat_info
+{
+	unsigned char mac[ETH_ALEN];
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_SNAT_TARGET "snat"
+#define EBT_DNAT_TARGET "dnat"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_pkttype.h b/include/linux/netfilter_bridge/ebt_pkttype.h
new file mode 100644
index 000000000000..0d64bbb29c66
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_pkttype.h
@@ -0,0 +1,11 @@
+#ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
+#define __LINUX_BRIDGE_EBT_PKTTYPE_H
+
+struct ebt_pkttype_info
+{
+	uint8_t pkt_type;
+	uint8_t invert;
+};
+#define EBT_PKTTYPE_MATCH "pkttype"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_redirect.h b/include/linux/netfilter_bridge/ebt_redirect.h
new file mode 100644
index 000000000000..5c67990fce39
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_redirect.h
@@ -0,0 +1,11 @@
+#ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
+#define __LINUX_BRIDGE_EBT_REDIRECT_H
+
+struct ebt_redirect_info
+{
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_REDIRECT_TARGET "redirect"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_stp.h b/include/linux/netfilter_bridge/ebt_stp.h
new file mode 100644
index 000000000000..e5fd67850f4d
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_stp.h
@@ -0,0 +1,46 @@
+#ifndef __LINUX_BRIDGE_EBT_STP_H
+#define __LINUX_BRIDGE_EBT_STP_H
+
+#define EBT_STP_TYPE		0x0001
+
+#define EBT_STP_FLAGS		0x0002
+#define EBT_STP_ROOTPRIO	0x0004
+#define EBT_STP_ROOTADDR	0x0008
+#define EBT_STP_ROOTCOST	0x0010
+#define EBT_STP_SENDERPRIO	0x0020
+#define EBT_STP_SENDERADDR	0x0040
+#define EBT_STP_PORT		0x0080
+#define EBT_STP_MSGAGE		0x0100
+#define EBT_STP_MAXAGE		0x0200
+#define EBT_STP_HELLOTIME	0x0400
+#define EBT_STP_FWDD		0x0800
+
+#define EBT_STP_MASK		0x0fff
+#define EBT_STP_CONFIG_MASK	0x0ffe
+
+#define EBT_STP_MATCH "stp"
+
+struct ebt_stp_config_info
+{
+	uint8_t flags;
+	uint16_t root_priol, root_priou;
+	char root_addr[6], root_addrmsk[6];
+	uint32_t root_costl, root_costu;
+	uint16_t sender_priol, sender_priou;
+	char sender_addr[6], sender_addrmsk[6];
+	uint16_t portl, portu;
+	uint16_t msg_agel, msg_ageu;
+	uint16_t max_agel, max_ageu;
+	uint16_t hello_timel, hello_timeu;
+	uint16_t forward_delayl, forward_delayu;
+};
+
+struct ebt_stp_info
+{
+	uint8_t type;
+	struct ebt_stp_config_info config;
+	uint16_t bitmask;
+	uint16_t invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_ulog.h b/include/linux/netfilter_bridge/ebt_ulog.h
new file mode 100644
index 000000000000..b677e2671541
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ulog.h
@@ -0,0 +1,36 @@
+#ifndef _EBT_ULOG_H
+#define _EBT_ULOG_H
+
+#define EBT_ULOG_DEFAULT_NLGROUP 0
+#define EBT_ULOG_DEFAULT_QTHRESHOLD 1
+#define EBT_ULOG_MAXNLGROUPS 32 /* hardcoded netlink max */
+#define EBT_ULOG_PREFIX_LEN 32
+#define EBT_ULOG_MAX_QLEN 50
+#define EBT_ULOG_WATCHER "ulog"
+#define EBT_ULOG_VERSION 1
+
+struct ebt_ulog_info {
+	uint32_t nlgroup;
+	unsigned int cprange;
+	unsigned int qthreshold;
+	char prefix[EBT_ULOG_PREFIX_LEN];
+};
+
+typedef struct ebt_ulog_packet_msg {
+	int version;
+	char indev[IFNAMSIZ];
+	char outdev[IFNAMSIZ];
+	char physindev[IFNAMSIZ];
+	char physoutdev[IFNAMSIZ];
+	char prefix[EBT_ULOG_PREFIX_LEN];
+	struct timeval stamp;
+	unsigned long mark;
+	unsigned int hook;
+	size_t data_len;
+	/* The complete packet, including Ethernet header and perhaps
+	 * the VLAN header is appended */
+	unsigned char data[0] __attribute__
+	                      ((aligned (__alignof__(struct ebt_ulog_info))));
+} ebt_ulog_packet_msg_t;
+
+#endif /* _EBT_ULOG_H */
diff --git a/include/linux/netfilter_bridge/ebt_vlan.h b/include/linux/netfilter_bridge/ebt_vlan.h
new file mode 100644
index 000000000000..cb1fcc41565f
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_vlan.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_BRIDGE_EBT_VLAN_H
+#define __LINUX_BRIDGE_EBT_VLAN_H
+
+#define EBT_VLAN_ID	0x01
+#define EBT_VLAN_PRIO	0x02
+#define EBT_VLAN_ENCAP	0x04
+#define EBT_VLAN_MASK (EBT_VLAN_ID | EBT_VLAN_PRIO | EBT_VLAN_ENCAP)
+#define EBT_VLAN_MATCH "vlan"
+
+struct ebt_vlan_info {
+	uint16_t id;		/* VLAN ID {1-4095} */
+	uint8_t prio;		/* VLAN User Priority {0-7} */
+	uint16_t encap;		/* VLAN Encapsulated frame code {0-65535} */
+	uint8_t bitmask;		/* Args bitmask bit 1=1 - ID arg,
+				   bit 2=1 User-Priority arg, bit 3=1 encap*/
+	uint8_t invflags;		/* Inverse bitmask  bit 1=1 - inversed ID arg, 
+				   bit 2=1 - inversed Pirority arg */
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
new file mode 100644
index 000000000000..b1a7cc90877b
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -0,0 +1,363 @@
+/*
+ *  ebtables
+ *
+ *	Authors:
+ *	Bart De Schuymer		<bdschuym@pandora.be>
+ *
+ *  ebtables.c,v 2.0, April, 2002
+ *
+ *  This code is stongly inspired on the iptables code which is
+ *  Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
+ */
+
+#ifndef __LINUX_BRIDGE_EFF_H
+#define __LINUX_BRIDGE_EFF_H
+#include <linux/if.h>
+#include <linux/netfilter_bridge.h>
+#include <linux/if_ether.h>
+
+#define EBT_TABLE_MAXNAMELEN 32
+#define EBT_CHAIN_MAXNAMELEN EBT_TABLE_MAXNAMELEN
+#define EBT_FUNCTION_MAXNAMELEN EBT_TABLE_MAXNAMELEN
+
+/* verdicts >0 are "branches" */
+#define EBT_ACCEPT   -1
+#define EBT_DROP     -2
+#define EBT_CONTINUE -3
+#define EBT_RETURN   -4
+#define NUM_STANDARD_TARGETS   4
+
+struct ebt_counter
+{
+	uint64_t pcnt;
+	uint64_t bcnt;
+};
+
+struct ebt_replace
+{
+	char name[EBT_TABLE_MAXNAMELEN];
+	unsigned int valid_hooks;
+	/* nr of rules in the table */
+	unsigned int nentries;
+	/* total size of the entries */
+	unsigned int entries_size;
+	/* start of the chains */
+	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
+	/* nr of counters userspace expects back */
+	unsigned int num_counters;
+	/* where the kernel will put the old counters */
+	struct ebt_counter *counters;
+	char *entries;
+};
+
+struct ebt_entries {
+	/* this field is always set to zero
+	 * See EBT_ENTRY_OR_ENTRIES.
+	 * Must be same size as ebt_entry.bitmask */
+	unsigned int distinguisher;
+	/* the chain name */
+	char name[EBT_CHAIN_MAXNAMELEN];
+	/* counter offset for this chain */
+	unsigned int counter_offset;
+	/* one standard (accept, drop, return) per hook */
+	int policy;
+	/* nr. of entries */
+	unsigned int nentries;
+	/* entry list */
+	char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+/* used for the bitmask of struct ebt_entry */
+
+/* This is a hack to make a difference between an ebt_entry struct and an
+ * ebt_entries struct when traversing the entries from start to end.
+ * Using this simplifies the code alot, while still being able to use
+ * ebt_entries.
+ * Contrary, iptables doesn't use something like ebt_entries and therefore uses
+ * different techniques for naming the policy and such. So, iptables doesn't
+ * need a hack like this.
+ */
+#define EBT_ENTRY_OR_ENTRIES 0x01
+/* these are the normal masks */
+#define EBT_NOPROTO 0x02
+#define EBT_802_3 0x04
+#define EBT_SOURCEMAC 0x08
+#define EBT_DESTMAC 0x10
+#define EBT_F_MASK (EBT_NOPROTO | EBT_802_3 | EBT_SOURCEMAC | EBT_DESTMAC \
+   | EBT_ENTRY_OR_ENTRIES)
+
+#define EBT_IPROTO 0x01
+#define EBT_IIN 0x02
+#define EBT_IOUT 0x04
+#define EBT_ISOURCE 0x8
+#define EBT_IDEST 0x10
+#define EBT_ILOGICALIN 0x20
+#define EBT_ILOGICALOUT 0x40
+#define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
+   | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
+
+struct ebt_entry_match
+{
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct ebt_match *match;
+	} u;
+	/* size of data */
+	unsigned int match_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+struct ebt_entry_watcher
+{
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct ebt_watcher *watcher;
+	} u;
+	/* size of data */
+	unsigned int watcher_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+struct ebt_entry_target
+{
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct ebt_target *target;
+	} u;
+	/* size of data */
+	unsigned int target_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+#define EBT_STANDARD_TARGET "standard"
+struct ebt_standard_target
+{
+	struct ebt_entry_target target;
+	int verdict;
+};
+
+/* one entry */
+struct ebt_entry {
+	/* this needs to be the first field */
+	unsigned int bitmask;
+	unsigned int invflags;
+	uint16_t ethproto;
+	/* the physical in-dev */
+	char in[IFNAMSIZ];
+	/* the logical in-dev */
+	char logical_in[IFNAMSIZ];
+	/* the physical out-dev */
+	char out[IFNAMSIZ];
+	/* the logical out-dev */
+	char logical_out[IFNAMSIZ];
+	unsigned char sourcemac[ETH_ALEN];
+	unsigned char sourcemsk[ETH_ALEN];
+	unsigned char destmac[ETH_ALEN];
+	unsigned char destmsk[ETH_ALEN];
+	/* sizeof ebt_entry + matches */
+	unsigned int watchers_offset;
+	/* sizeof ebt_entry + matches + watchers */
+	unsigned int target_offset;
+	/* sizeof ebt_entry + matches + watchers + target */
+	unsigned int next_offset;
+	unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+/* {g,s}etsockopt numbers */
+#define EBT_BASE_CTL            128
+
+#define EBT_SO_SET_ENTRIES      (EBT_BASE_CTL)
+#define EBT_SO_SET_COUNTERS     (EBT_SO_SET_ENTRIES+1)
+#define EBT_SO_SET_MAX          (EBT_SO_SET_COUNTERS+1)
+
+#define EBT_SO_GET_INFO         (EBT_BASE_CTL)
+#define EBT_SO_GET_ENTRIES      (EBT_SO_GET_INFO+1)
+#define EBT_SO_GET_INIT_INFO    (EBT_SO_GET_ENTRIES+1)
+#define EBT_SO_GET_INIT_ENTRIES (EBT_SO_GET_INIT_INFO+1)
+#define EBT_SO_GET_MAX          (EBT_SO_GET_INIT_ENTRIES+1)
+
+#ifdef __KERNEL__
+
+/* return values for match() functions */
+#define EBT_MATCH 0
+#define EBT_NOMATCH 1
+
+struct ebt_match
+{
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	/* 0 == it matches */
+	int (*match)(const struct sk_buff *skb, const struct net_device *in,
+	   const struct net_device *out, const void *matchdata,
+	   unsigned int datalen);
+	/* 0 == let it in */
+	int (*check)(const char *tablename, unsigned int hookmask,
+	   const struct ebt_entry *e, void *matchdata, unsigned int datalen);
+	void (*destroy)(void *matchdata, unsigned int datalen);
+	struct module *me;
+};
+
+struct ebt_watcher
+{
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	void (*watcher)(const struct sk_buff *skb, unsigned int hooknr,
+	   const struct net_device *in, const struct net_device *out,
+	   const void *watcherdata, unsigned int datalen);
+	/* 0 == let it in */
+	int (*check)(const char *tablename, unsigned int hookmask,
+	   const struct ebt_entry *e, void *watcherdata, unsigned int datalen);
+	void (*destroy)(void *watcherdata, unsigned int datalen);
+	struct module *me;
+};
+
+struct ebt_target
+{
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	/* returns one of the standard verdicts */
+	int (*target)(struct sk_buff **pskb, unsigned int hooknr,
+	   const struct net_device *in, const struct net_device *out,
+	   const void *targetdata, unsigned int datalen);
+	/* 0 == let it in */
+	int (*check)(const char *tablename, unsigned int hookmask,
+	   const struct ebt_entry *e, void *targetdata, unsigned int datalen);
+	void (*destroy)(void *targetdata, unsigned int datalen);
+	struct module *me;
+};
+
+/* used for jumping from and into user defined chains (udc) */
+struct ebt_chainstack
+{
+	struct ebt_entries *chaininfo; /* pointer to chain data */
+	struct ebt_entry *e; /* pointer to entry data */
+	unsigned int n; /* n'th entry */
+};
+
+struct ebt_table_info
+{
+	/* total size of the entries */
+	unsigned int entries_size;
+	unsigned int nentries;
+	/* pointers to the start of the chains */
+	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
+	/* room to maintain the stack used for jumping from and into udc */
+	struct ebt_chainstack **chainstack;
+	char *entries;
+	struct ebt_counter counters[0] ____cacheline_aligned;
+};
+
+struct ebt_table
+{
+	struct list_head list;
+	char name[EBT_TABLE_MAXNAMELEN];
+	struct ebt_replace *table;
+	unsigned int valid_hooks;
+	rwlock_t lock;
+	/* e.g. could be the table explicitly only allows certain
+	 * matches, targets, ... 0 == let it in */
+	int (*check)(const struct ebt_table_info *info,
+	   unsigned int valid_hooks);
+	/* the data used by the kernel */
+	struct ebt_table_info *private;
+	struct module *me;
+};
+
+#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
+		     ~(__alignof__(struct ebt_replace)-1))
+extern int ebt_register_table(struct ebt_table *table);
+extern void ebt_unregister_table(struct ebt_table *table);
+extern int ebt_register_match(struct ebt_match *match);
+extern void ebt_unregister_match(struct ebt_match *match);
+extern int ebt_register_watcher(struct ebt_watcher *watcher);
+extern void ebt_unregister_watcher(struct ebt_watcher *watcher);
+extern int ebt_register_target(struct ebt_target *target);
+extern void ebt_unregister_target(struct ebt_target *target);
+extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff **pskb,
+   const struct net_device *in, const struct net_device *out,
+   struct ebt_table *table);
+
+/* Used in the kernel match() functions */
+#define FWINV(bool,invflg) ((bool) ^ !!(info->invflags & invflg))
+/* True if the hook mask denotes that the rule is in a base chain,
+ * used in the check() functions */
+#define BASE_CHAIN (hookmask & (1 << NF_BR_NUMHOOKS))
+/* Clear the bit in the hook mask that tells if the rule is on a base chain */
+#define CLEAR_BASE_CHAIN_BIT (hookmask &= ~(1 << NF_BR_NUMHOOKS))
+/* True if the target is not a standard target */
+#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
+
+#endif /* __KERNEL__ */
+
+/* blatently stolen from ip_tables.h
+ * fn returns 0 to continue iteration */
+#define EBT_MATCH_ITERATE(e, fn, args...)                   \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry_match *__match;                    \
+	                                                    \
+	for (__i = sizeof(struct ebt_entry);                \
+	     __i < (e)->watchers_offset;                    \
+	     __i += __match->match_size +                   \
+	     sizeof(struct ebt_entry_match)) {              \
+		__match = (void *)(e) + __i;                \
+		                                            \
+		__ret = fn(__match , ## args);              \
+		if (__ret != 0)                             \
+			break;                              \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (e)->watchers_offset)            \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#define EBT_WATCHER_ITERATE(e, fn, args...)                 \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry_watcher *__watcher;                \
+	                                                    \
+	for (__i = e->watchers_offset;                      \
+	     __i < (e)->target_offset;                      \
+	     __i += __watcher->watcher_size +               \
+	     sizeof(struct ebt_entry_watcher)) {            \
+		__watcher = (void *)(e) + __i;              \
+		                                            \
+		__ret = fn(__watcher , ## args);            \
+		if (__ret != 0)                             \
+			break;                              \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (e)->target_offset)              \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#define EBT_ENTRY_ITERATE(entries, size, fn, args...)       \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry *__entry;                          \
+	                                                    \
+	for (__i = 0; __i < (size);) {                      \
+		__entry = (void *)(entries) + __i;          \
+		__ret = fn(__entry , ## args);              \
+		if (__ret != 0)                             \
+			break;                              \
+		if (__entry->bitmask != 0)                  \
+			__i += __entry->next_offset;        \
+		else                                        \
+			__i += sizeof(struct ebt_entries);  \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (size))                          \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#endif
diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h
new file mode 100644
index 000000000000..3064eec9cb8e
--- /dev/null
+++ b/include/linux/netfilter_decnet.h
@@ -0,0 +1,59 @@
+#ifndef __LINUX_DECNET_NETFILTER_H
+#define __LINUX_DECNET_NETFILTER_H
+
+/* DECnet-specific defines for netfilter. 
+ * This file (C) Steve Whitehouse 1999 derived from the
+ * ipv4 netfilter header file which is
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_DN_SRC		0x0001
+/* Dest IP address. */
+#define NFC_DN_DST		0x0002
+/* Input device. */
+#define NFC_DN_IF_IN		0x0004
+/* Output device. */
+#define NFC_DN_IF_OUT		0x0008
+
+/* DECnet Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_DN_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_DN_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_DN_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_DN_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_DN_POST_ROUTING	4
+/* Input Hello Packets */
+#define NF_DN_HELLO		5
+/* Input Routing Packets */
+#define NF_DN_ROUTE		6
+#define NF_DN_NUMHOOKS		7
+
+enum nf_dn_hook_priorities {
+	NF_DN_PRI_FIRST = INT_MIN,
+	NF_DN_PRI_CONNTRACK = -200,
+	NF_DN_PRI_MANGLE = -150,
+	NF_DN_PRI_NAT_DST = -100,
+	NF_DN_PRI_FILTER = 0,
+	NF_DN_PRI_NAT_SRC = 100,
+	NF_DN_PRI_DNRTMSG = 200,
+	NF_DN_PRI_LAST = INT_MAX,
+};
+
+struct nf_dn_rtmsg {
+	int nfdn_ifindex;
+};
+
+#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
+
+#define DNRMG_L1_GROUP 0x01
+#define DNRMG_L2_GROUP 0x02
+
+#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
new file mode 100644
index 000000000000..c9bacf9b2431
--- /dev/null
+++ b/include/linux/netfilter_ipv4.h
@@ -0,0 +1,90 @@
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
+
+/* IPv4-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+
+#include <linux/config.h>
+#include <linux/netfilter.h>
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC		0x0001
+/* Dest IP address. */
+#define NFC_IP_DST		0x0002
+/* Input device. */
+#define NFC_IP_IF_IN		0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT		0x0008
+/* TOS. */
+#define NFC_IP_TOS		0x0010
+/* Protocol. */
+#define NFC_IP_PROTO		0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS		0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG		0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS		0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT		0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT		0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN	0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING	4
+#define NF_IP_NUMHOOKS		5
+
+enum nf_ip_hook_priorities {
+	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP_PRI_RAW = -300,
+	NF_IP_PRI_SELINUX_FIRST = -225,
+	NF_IP_PRI_CONNTRACK = -200,
+	NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD = -175,
+	NF_IP_PRI_MANGLE = -150,
+	NF_IP_PRI_NAT_DST = -100,
+	NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50,
+	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_NAT_SRC = 100,
+	NF_IP_PRI_SELINUX_LAST = 225,
+	NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+#ifdef __KERNEL__
+#ifdef CONFIG_NETFILTER_DEBUG
+void nf_debug_ip_local_deliver(struct sk_buff *skb);
+void nf_debug_ip_loopback_xmit(struct sk_buff *newskb);
+void nf_debug_ip_finish_output2(struct sk_buff *skb);
+#endif /*CONFIG_NETFILTER_DEBUG*/
+
+extern int ip_route_me_harder(struct sk_buff **pskb);
+
+/* Call this before modifying an existing IP packet: ensures it is
+   modifiable and linear to the point you care about (writable_len).
+   Returns true or false. */
+extern int skb_ip_make_writable(struct sk_buff **pskb,
+				unsigned int writable_len);
+#endif /*__KERNEL__*/
+
+#endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4/ip_conntrack.h b/include/linux/netfilter_ipv4/ip_conntrack.h
new file mode 100644
index 000000000000..3781192ce159
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack.h
@@ -0,0 +1,314 @@
+#ifndef _IP_CONNTRACK_H
+#define _IP_CONNTRACK_H
+/* Connection state tracking for netfilter.  This is separated from,
+   but required by, the NAT layer; it can also be used by an iptables
+   extension. */
+enum ip_conntrack_info
+{
+	/* Part of an established connection (either direction). */
+	IP_CT_ESTABLISHED,
+
+	/* Like NEW, but related to an existing connection, or ICMP error
+	   (in either direction). */
+	IP_CT_RELATED,
+
+	/* Started a new connection to track (only
+           IP_CT_DIR_ORIGINAL); may be a retransmission. */
+	IP_CT_NEW,
+
+	/* >= this indicates reply direction */
+	IP_CT_IS_REPLY,
+
+	/* Number of distinct IP_CT types (no NEW in reply dirn). */
+	IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
+};
+
+/* Bitset representing status of connection. */
+enum ip_conntrack_status {
+	/* It's an expected connection: bit 0 set.  This bit never changed */
+	IPS_EXPECTED_BIT = 0,
+	IPS_EXPECTED = (1 << IPS_EXPECTED_BIT),
+
+	/* We've seen packets both ways: bit 1 set.  Can be set, not unset. */
+	IPS_SEEN_REPLY_BIT = 1,
+	IPS_SEEN_REPLY = (1 << IPS_SEEN_REPLY_BIT),
+
+	/* Conntrack should never be early-expired. */
+	IPS_ASSURED_BIT = 2,
+	IPS_ASSURED = (1 << IPS_ASSURED_BIT),
+
+	/* Connection is confirmed: originating packet has left box */
+	IPS_CONFIRMED_BIT = 3,
+	IPS_CONFIRMED = (1 << IPS_CONFIRMED_BIT),
+
+	/* Connection needs src nat in orig dir.  This bit never changed. */
+	IPS_SRC_NAT_BIT = 4,
+	IPS_SRC_NAT = (1 << IPS_SRC_NAT_BIT),
+
+	/* Connection needs dst nat in orig dir.  This bit never changed. */
+	IPS_DST_NAT_BIT = 5,
+	IPS_DST_NAT = (1 << IPS_DST_NAT_BIT),
+
+	/* Both together. */
+	IPS_NAT_MASK = (IPS_DST_NAT | IPS_SRC_NAT),
+
+	/* Connection needs TCP sequence adjusted. */
+	IPS_SEQ_ADJUST_BIT = 6,
+	IPS_SEQ_ADJUST = (1 << IPS_SEQ_ADJUST_BIT),
+
+	/* NAT initialization bits. */
+	IPS_SRC_NAT_DONE_BIT = 7,
+	IPS_SRC_NAT_DONE = (1 << IPS_SRC_NAT_DONE_BIT),
+
+	IPS_DST_NAT_DONE_BIT = 8,
+	IPS_DST_NAT_DONE = (1 << IPS_DST_NAT_DONE_BIT),
+
+	/* Both together */
+	IPS_NAT_DONE_MASK = (IPS_DST_NAT_DONE | IPS_SRC_NAT_DONE),
+};
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <asm/atomic.h>
+
+#include <linux/netfilter_ipv4/ip_conntrack_tcp.h>
+#include <linux/netfilter_ipv4/ip_conntrack_icmp.h>
+#include <linux/netfilter_ipv4/ip_conntrack_sctp.h>
+
+/* per conntrack: protocol private data */
+union ip_conntrack_proto {
+	/* insert conntrack proto private data here */
+	struct ip_ct_sctp sctp;
+	struct ip_ct_tcp tcp;
+	struct ip_ct_icmp icmp;
+};
+
+union ip_conntrack_expect_proto {
+	/* insert expect proto private data here */
+};
+
+/* Add protocol helper include file here */
+#include <linux/netfilter_ipv4/ip_conntrack_amanda.h>
+#include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
+#include <linux/netfilter_ipv4/ip_conntrack_irc.h>
+
+/* per conntrack: application helper private data */
+union ip_conntrack_help {
+	/* insert conntrack helper private data (master) here */
+	struct ip_ct_ftp_master ct_ftp_info;
+	struct ip_ct_irc_master ct_irc_info;
+};
+
+#ifdef CONFIG_IP_NF_NAT_NEEDED
+#include <linux/netfilter_ipv4/ip_nat.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+
+#ifdef CONFIG_NETFILTER_DEBUG
+#define IP_NF_ASSERT(x)							\
+do {									\
+	if (!(x))							\
+		/* Wooah!  I'm tripping my conntrack in a frenzy of	\
+		   netplay... */					\
+		printk("NF_IP_ASSERT: %s:%i(%s)\n",			\
+		       __FILE__, __LINE__, __FUNCTION__);		\
+} while(0)
+#else
+#define IP_NF_ASSERT(x)
+#endif
+
+struct ip_conntrack_counter
+{
+	u_int64_t packets;
+	u_int64_t bytes;
+};
+
+struct ip_conntrack_helper;
+
+struct ip_conntrack
+{
+	/* Usage count in here is 1 for hash table/destruct timer, 1 per skb,
+           plus 1 for any connection(s) we are `master' for */
+	struct nf_conntrack ct_general;
+
+	/* Have we seen traffic both ways yet? (bitset) */
+	unsigned long status;
+
+	/* Timer function; drops refcnt when it goes off. */
+	struct timer_list timeout;
+
+#ifdef CONFIG_IP_NF_CT_ACCT
+	/* Accounting Information (same cache line as other written members) */
+	struct ip_conntrack_counter counters[IP_CT_DIR_MAX];
+#endif
+	/* If we were expected by an expectation, this will be it */
+	struct ip_conntrack *master;
+
+	/* Current number of expected connections */
+	unsigned int expecting;
+
+	/* Helper, if any. */
+	struct ip_conntrack_helper *helper;
+
+	/* Storage reserved for other modules: */
+	union ip_conntrack_proto proto;
+
+	union ip_conntrack_help help;
+
+#ifdef CONFIG_IP_NF_NAT_NEEDED
+	struct {
+		struct ip_nat_info info;
+#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
+	defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
+		int masq_index;
+#endif
+	} nat;
+#endif /* CONFIG_IP_NF_NAT_NEEDED */
+
+#if defined(CONFIG_IP_NF_CONNTRACK_MARK)
+	unsigned long mark;
+#endif
+
+	/* Traversed often, so hopefully in different cacheline to top */
+	/* These are my tuples; original and reply */
+	struct ip_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX];
+};
+
+struct ip_conntrack_expect
+{
+	/* Internal linked list (global expectation list) */
+	struct list_head list;
+
+	/* We expect this tuple, with the following mask */
+	struct ip_conntrack_tuple tuple, mask;
+ 
+	/* Function to call after setup and insertion */
+	void (*expectfn)(struct ip_conntrack *new,
+			 struct ip_conntrack_expect *this);
+
+	/* The conntrack of the master connection */
+	struct ip_conntrack *master;
+
+	/* Timer function; deletes the expectation. */
+	struct timer_list timeout;
+
+#ifdef CONFIG_IP_NF_NAT_NEEDED
+	/* This is the original per-proto part, used to map the
+	 * expected connection the way the recipient expects. */
+	union ip_conntrack_manip_proto saved_proto;
+	/* Direction relative to the master connection. */
+	enum ip_conntrack_dir dir;
+#endif
+};
+
+static inline struct ip_conntrack *
+tuplehash_to_ctrack(const struct ip_conntrack_tuple_hash *hash)
+{
+	return container_of(hash, struct ip_conntrack,
+			    tuplehash[hash->tuple.dst.dir]);
+}
+
+/* get master conntrack via master expectation */
+#define master_ct(conntr) (conntr->master)
+
+/* Alter reply tuple (maybe alter helper). */
+extern void
+ip_conntrack_alter_reply(struct ip_conntrack *conntrack,
+			 const struct ip_conntrack_tuple *newreply);
+
+/* Is this tuple taken? (ignoring any belonging to the given
+   conntrack). */
+extern int
+ip_conntrack_tuple_taken(const struct ip_conntrack_tuple *tuple,
+			 const struct ip_conntrack *ignored_conntrack);
+
+/* Return conntrack_info and tuple hash for given skb. */
+static inline struct ip_conntrack *
+ip_conntrack_get(const struct sk_buff *skb, enum ip_conntrack_info *ctinfo)
+{
+	*ctinfo = skb->nfctinfo;
+	return (struct ip_conntrack *)skb->nfct;
+}
+
+/* decrement reference count on a conntrack */
+extern inline void ip_conntrack_put(struct ip_conntrack *ct);
+
+/* call to create an explicit dependency on ip_conntrack. */
+extern void need_ip_conntrack(void);
+
+extern int invert_tuplepr(struct ip_conntrack_tuple *inverse,
+			  const struct ip_conntrack_tuple *orig);
+
+/* Refresh conntrack for this many jiffies */
+extern void ip_ct_refresh_acct(struct ip_conntrack *ct,
+			       enum ip_conntrack_info ctinfo,
+			       const struct sk_buff *skb,
+			       unsigned long extra_jiffies);
+
+/* These are for NAT.  Icky. */
+/* Update TCP window tracking data when NAT mangles the packet */
+extern void ip_conntrack_tcp_update(struct sk_buff *skb,
+				    struct ip_conntrack *conntrack,
+				    enum ip_conntrack_dir dir);
+
+/* Call me when a conntrack is destroyed. */
+extern void (*ip_conntrack_destroyed)(struct ip_conntrack *conntrack);
+
+/* Fake conntrack entry for untracked connections */
+extern struct ip_conntrack ip_conntrack_untracked;
+
+/* Returns new sk_buff, or NULL */
+struct sk_buff *
+ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user);
+
+/* Iterate over all conntracks: if iter returns true, it's deleted. */
+extern void
+ip_ct_iterate_cleanup(int (*iter)(struct ip_conntrack *i, void *data),
+		      void *data);
+
+/* It's confirmed if it is, or has been in the hash table. */
+static inline int is_confirmed(struct ip_conntrack *ct)
+{
+	return test_bit(IPS_CONFIRMED_BIT, &ct->status);
+}
+
+extern unsigned int ip_conntrack_htable_size;
+ 
+struct ip_conntrack_stat
+{
+	unsigned int searched;
+	unsigned int found;
+	unsigned int new;
+	unsigned int invalid;
+	unsigned int ignore;
+	unsigned int delete;
+	unsigned int delete_list;
+	unsigned int insert;
+	unsigned int insert_failed;
+	unsigned int drop;
+	unsigned int early_drop;
+	unsigned int error;
+	unsigned int expect_new;
+	unsigned int expect_create;
+	unsigned int expect_delete;
+};
+
+#define CONNTRACK_STAT_INC(count) (__get_cpu_var(ip_conntrack_stat).count++)
+
+#ifdef CONFIG_IP_NF_NAT_NEEDED
+static inline int ip_nat_initialized(struct ip_conntrack *conntrack,
+				     enum ip_nat_manip_type manip)
+{
+	if (manip == IP_NAT_MANIP_SRC)
+		return test_bit(IPS_SRC_NAT_DONE_BIT, &conntrack->status);
+	return test_bit(IPS_DST_NAT_DONE_BIT, &conntrack->status);
+}
+#endif /* CONFIG_IP_NF_NAT_NEEDED */
+
+#endif /* __KERNEL__ */
+#endif /* _IP_CONNTRACK_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_amanda.h b/include/linux/netfilter_ipv4/ip_conntrack_amanda.h
new file mode 100644
index 000000000000..de3e41f51aec
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_amanda.h
@@ -0,0 +1,11 @@
+#ifndef _IP_CONNTRACK_AMANDA_H
+#define _IP_CONNTRACK_AMANDA_H
+/* AMANDA tracking. */
+
+struct ip_conntrack_expect;
+extern unsigned int (*ip_nat_amanda_hook)(struct sk_buff **pskb,
+					  enum ip_conntrack_info ctinfo,
+					  unsigned int matchoff,
+					  unsigned int matchlen,
+					  struct ip_conntrack_expect *exp);
+#endif /* _IP_CONNTRACK_AMANDA_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_core.h b/include/linux/netfilter_ipv4/ip_conntrack_core.h
new file mode 100644
index 000000000000..d84be02cb4fc
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_core.h
@@ -0,0 +1,52 @@
+#ifndef _IP_CONNTRACK_CORE_H
+#define _IP_CONNTRACK_CORE_H
+#include <linux/netfilter.h>
+#include <linux/netfilter_ipv4/lockhelp.h>
+
+/* This header is used to share core functionality between the
+   standalone connection tracking module, and the compatibility layer's use
+   of connection tracking. */
+extern unsigned int ip_conntrack_in(unsigned int hooknum,
+				    struct sk_buff **pskb,
+				    const struct net_device *in,
+				    const struct net_device *out,
+				    int (*okfn)(struct sk_buff *));
+
+extern int ip_conntrack_init(void);
+extern void ip_conntrack_cleanup(void);
+
+struct ip_conntrack_protocol;
+
+extern int
+ip_ct_get_tuple(const struct iphdr *iph,
+		const struct sk_buff *skb,
+		unsigned int dataoff,
+		struct ip_conntrack_tuple *tuple,
+		const struct ip_conntrack_protocol *protocol);
+
+extern int
+ip_ct_invert_tuple(struct ip_conntrack_tuple *inverse,
+		   const struct ip_conntrack_tuple *orig,
+		   const struct ip_conntrack_protocol *protocol);
+
+/* Find a connection corresponding to a tuple. */
+struct ip_conntrack_tuple_hash *
+ip_conntrack_find_get(const struct ip_conntrack_tuple *tuple,
+		      const struct ip_conntrack *ignored_conntrack);
+
+extern int __ip_conntrack_confirm(struct sk_buff **pskb);
+
+/* Confirm a connection: returns NF_DROP if packet must be dropped. */
+static inline int ip_conntrack_confirm(struct sk_buff **pskb)
+{
+	if ((*pskb)->nfct
+	    && !is_confirmed((struct ip_conntrack *)(*pskb)->nfct))
+		return __ip_conntrack_confirm(pskb);
+	return NF_ACCEPT;
+}
+
+extern struct list_head *ip_conntrack_hash;
+extern struct list_head ip_conntrack_expect_list;
+DECLARE_RWLOCK_EXTERN(ip_conntrack_lock);
+#endif /* _IP_CONNTRACK_CORE_H */
+
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_ftp.h b/include/linux/netfilter_ipv4/ip_conntrack_ftp.h
new file mode 100644
index 000000000000..5f06429b9047
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_ftp.h
@@ -0,0 +1,43 @@
+#ifndef _IP_CONNTRACK_FTP_H
+#define _IP_CONNTRACK_FTP_H
+/* FTP tracking. */
+
+#ifdef __KERNEL__
+
+#define FTP_PORT	21
+
+#endif /* __KERNEL__ */
+
+enum ip_ct_ftp_type
+{
+	/* PORT command from client */
+	IP_CT_FTP_PORT,
+	/* PASV response from server */
+	IP_CT_FTP_PASV,
+	/* EPRT command from client */
+	IP_CT_FTP_EPRT,
+	/* EPSV response from server */
+	IP_CT_FTP_EPSV,
+};
+
+#define NUM_SEQ_TO_REMEMBER 2
+/* This structure exists only once per master */
+struct ip_ct_ftp_master {
+	/* Valid seq positions for cmd matching after newline */
+	u_int32_t seq_aft_nl[IP_CT_DIR_MAX][NUM_SEQ_TO_REMEMBER];
+	/* 0 means seq_match_aft_nl not set */
+	int seq_aft_nl_num[IP_CT_DIR_MAX];
+};
+
+struct ip_conntrack_expect;
+
+/* For NAT to hook in when we find a packet which describes what other
+ * connection we should expect. */
+extern unsigned int (*ip_nat_ftp_hook)(struct sk_buff **pskb,
+				       enum ip_conntrack_info ctinfo,
+				       enum ip_ct_ftp_type type,
+				       unsigned int matchoff,
+				       unsigned int matchlen,
+				       struct ip_conntrack_expect *exp,
+				       u32 *seq);
+#endif /* _IP_CONNTRACK_FTP_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_helper.h b/include/linux/netfilter_ipv4/ip_conntrack_helper.h
new file mode 100644
index 000000000000..b1bbba0a12cb
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_helper.h
@@ -0,0 +1,41 @@
+/* IP connection tracking helpers. */
+#ifndef _IP_CONNTRACK_HELPER_H
+#define _IP_CONNTRACK_HELPER_H
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+
+struct module;
+
+struct ip_conntrack_helper
+{	
+	struct list_head list; 		/* Internal use. */
+
+	const char *name;		/* name of the module */
+	struct module *me;		/* pointer to self */
+	unsigned int max_expected;	/* Maximum number of concurrent 
+					 * expected connections */
+	unsigned int timeout;		/* timeout for expecteds */
+
+	/* Mask of things we will help (compared against server response) */
+	struct ip_conntrack_tuple tuple;
+	struct ip_conntrack_tuple mask;
+	
+	/* Function to call when data passes; return verdict, or -1 to
+           invalidate. */
+	int (*help)(struct sk_buff **pskb,
+		    struct ip_conntrack *ct,
+		    enum ip_conntrack_info conntrackinfo);
+};
+
+extern int ip_conntrack_helper_register(struct ip_conntrack_helper *);
+extern void ip_conntrack_helper_unregister(struct ip_conntrack_helper *);
+
+/* Allocate space for an expectation: this is mandatory before calling 
+   ip_conntrack_expect_related. */
+extern struct ip_conntrack_expect *ip_conntrack_expect_alloc(void);
+extern void ip_conntrack_expect_free(struct ip_conntrack_expect *exp);
+
+/* Add an expected connection: can have more than one per connection */
+extern int ip_conntrack_expect_related(struct ip_conntrack_expect *exp);
+extern void ip_conntrack_unexpect_related(struct ip_conntrack_expect *exp);
+
+#endif /*_IP_CONNTRACK_HELPER_H*/
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_icmp.h b/include/linux/netfilter_ipv4/ip_conntrack_icmp.h
new file mode 100644
index 000000000000..f1664abbe392
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_icmp.h
@@ -0,0 +1,11 @@
+#ifndef _IP_CONNTRACK_ICMP_H
+#define _IP_CONNTRACK_ICMP_H
+/* ICMP tracking. */
+#include <asm/atomic.h>
+
+struct ip_ct_icmp
+{
+	/* Optimization: when number in == number out, forget immediately. */
+	atomic_t count;
+};
+#endif /* _IP_CONNTRACK_ICMP_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_irc.h b/include/linux/netfilter_ipv4/ip_conntrack_irc.h
new file mode 100644
index 000000000000..16601e0d5626
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_irc.h
@@ -0,0 +1,32 @@
+/* IRC extension for IP connection tracking.
+ * (C) 2000 by Harald Welte <laforge@gnumonks.org>
+ * based on RR's ip_conntrack_ftp.h
+ *
+ * ip_conntrack_irc.h,v 1.6 2000/11/07 18:26:42 laforge Exp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *
+ */
+#ifndef _IP_CONNTRACK_IRC_H
+#define _IP_CONNTRACK_IRC_H
+
+/* This structure exists only once per master */
+struct ip_ct_irc_master {
+};
+
+#ifdef __KERNEL__
+extern unsigned int (*ip_nat_irc_hook)(struct sk_buff **pskb,
+				       enum ip_conntrack_info ctinfo,
+				       unsigned int matchoff,
+				       unsigned int matchlen,
+				       struct ip_conntrack_expect *exp);
+
+#define IRC_PORT	6667
+
+#endif /* __KERNEL__ */
+
+#endif /* _IP_CONNTRACK_IRC_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_protocol.h b/include/linux/netfilter_ipv4/ip_conntrack_protocol.h
new file mode 100644
index 000000000000..e20b57c5e1b7
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_protocol.h
@@ -0,0 +1,89 @@
+/* Header for use in defining a given protocol for connection tracking. */
+#ifndef _IP_CONNTRACK_PROTOCOL_H
+#define _IP_CONNTRACK_PROTOCOL_H
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+
+struct seq_file;
+
+struct ip_conntrack_protocol
+{
+	/* Protocol number. */
+	u_int8_t proto;
+
+	/* Protocol name */
+	const char *name;
+
+	/* Try to fill in the third arg: dataoff is offset past IP
+           hdr.  Return true if possible. */
+	int (*pkt_to_tuple)(const struct sk_buff *skb,
+			   unsigned int dataoff,
+			   struct ip_conntrack_tuple *tuple);
+
+	/* Invert the per-proto part of the tuple: ie. turn xmit into reply.
+	 * Some packets can't be inverted: return 0 in that case.
+	 */
+	int (*invert_tuple)(struct ip_conntrack_tuple *inverse,
+			    const struct ip_conntrack_tuple *orig);
+
+	/* Print out the per-protocol part of the tuple. Return like seq_* */
+	int (*print_tuple)(struct seq_file *,
+			   const struct ip_conntrack_tuple *);
+
+	/* Print out the private part of the conntrack. */
+	int (*print_conntrack)(struct seq_file *, const struct ip_conntrack *);
+
+	/* Returns verdict for packet, or -1 for invalid. */
+	int (*packet)(struct ip_conntrack *conntrack,
+		      const struct sk_buff *skb,
+		      enum ip_conntrack_info ctinfo);
+
+	/* Called when a new connection for this protocol found;
+	 * returns TRUE if it's OK.  If so, packet() called next. */
+	int (*new)(struct ip_conntrack *conntrack, const struct sk_buff *skb);
+
+	/* Called when a conntrack entry is destroyed */
+	void (*destroy)(struct ip_conntrack *conntrack);
+
+	int (*error)(struct sk_buff *skb, enum ip_conntrack_info *ctinfo,
+		     unsigned int hooknum);
+
+	/* Module (if any) which this is connected to. */
+	struct module *me;
+};
+
+#define MAX_IP_CT_PROTO 256
+extern struct ip_conntrack_protocol *ip_ct_protos[MAX_IP_CT_PROTO];
+
+/* Protocol registration. */
+extern int ip_conntrack_protocol_register(struct ip_conntrack_protocol *proto);
+extern void ip_conntrack_protocol_unregister(struct ip_conntrack_protocol *proto);
+
+static inline struct ip_conntrack_protocol *ip_ct_find_proto(u_int8_t protocol)
+{
+	return ip_ct_protos[protocol];
+}
+
+/* Existing built-in protocols */
+extern struct ip_conntrack_protocol ip_conntrack_protocol_tcp;
+extern struct ip_conntrack_protocol ip_conntrack_protocol_udp;
+extern struct ip_conntrack_protocol ip_conntrack_protocol_icmp;
+extern struct ip_conntrack_protocol ip_conntrack_generic_protocol;
+extern int ip_conntrack_protocol_tcp_init(void);
+
+/* Log invalid packets */
+extern unsigned int ip_ct_log_invalid;
+
+#ifdef CONFIG_SYSCTL
+#ifdef DEBUG_INVALID_PACKETS
+#define LOG_INVALID(proto) \
+	(ip_ct_log_invalid == (proto) || ip_ct_log_invalid == IPPROTO_RAW)
+#else
+#define LOG_INVALID(proto) \
+	((ip_ct_log_invalid == (proto) || ip_ct_log_invalid == IPPROTO_RAW) \
+	 && net_ratelimit())
+#endif
+#else
+#define LOG_INVALID(proto) 0
+#endif /* CONFIG_SYSCTL */
+
+#endif /*_IP_CONNTRACK_PROTOCOL_H*/
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_sctp.h b/include/linux/netfilter_ipv4/ip_conntrack_sctp.h
new file mode 100644
index 000000000000..7a8d869321f7
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_sctp.h
@@ -0,0 +1,25 @@
+#ifndef _IP_CONNTRACK_SCTP_H
+#define _IP_CONNTRACK_SCTP_H
+/* SCTP tracking. */
+
+enum sctp_conntrack {
+	SCTP_CONNTRACK_NONE,
+	SCTP_CONNTRACK_CLOSED,
+	SCTP_CONNTRACK_COOKIE_WAIT,
+	SCTP_CONNTRACK_COOKIE_ECHOED,
+	SCTP_CONNTRACK_ESTABLISHED,
+	SCTP_CONNTRACK_SHUTDOWN_SENT,
+	SCTP_CONNTRACK_SHUTDOWN_RECD,
+	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
+	SCTP_CONNTRACK_MAX
+};
+
+struct ip_ct_sctp
+{
+	enum sctp_conntrack state;
+
+	u_int32_t vtag[IP_CT_DIR_MAX];
+	u_int32_t ttag[IP_CT_DIR_MAX];
+};
+
+#endif /* _IP_CONNTRACK_SCTP_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_tcp.h b/include/linux/netfilter_ipv4/ip_conntrack_tcp.h
new file mode 100644
index 000000000000..16da044d97a7
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_tcp.h
@@ -0,0 +1,51 @@
+#ifndef _IP_CONNTRACK_TCP_H
+#define _IP_CONNTRACK_TCP_H
+/* TCP tracking. */
+
+enum tcp_conntrack {
+	TCP_CONNTRACK_NONE,
+	TCP_CONNTRACK_SYN_SENT,
+	TCP_CONNTRACK_SYN_RECV,
+	TCP_CONNTRACK_ESTABLISHED,
+	TCP_CONNTRACK_FIN_WAIT,
+	TCP_CONNTRACK_CLOSE_WAIT,
+	TCP_CONNTRACK_LAST_ACK,
+	TCP_CONNTRACK_TIME_WAIT,
+	TCP_CONNTRACK_CLOSE,
+	TCP_CONNTRACK_LISTEN,
+	TCP_CONNTRACK_MAX,
+	TCP_CONNTRACK_IGNORE
+};
+
+/* Window scaling is advertised by the sender */
+#define IP_CT_TCP_FLAG_WINDOW_SCALE		0x01
+
+/* SACK is permitted by the sender */
+#define IP_CT_TCP_FLAG_SACK_PERM		0x02
+
+/* This sender sent FIN first */
+#define IP_CT_TCP_FLAG_CLOSE_INIT		0x03
+
+struct ip_ct_tcp_state {
+	u_int32_t	td_end;		/* max of seq + len */
+	u_int32_t	td_maxend;	/* max of ack + max(win, 1) */
+	u_int32_t	td_maxwin;	/* max(win) */
+	u_int8_t	td_scale;	/* window scale factor */
+	u_int8_t	loose;		/* used when connection picked up from the middle */
+	u_int8_t	flags;		/* per direction options */
+};
+
+struct ip_ct_tcp
+{
+	struct ip_ct_tcp_state seen[2];	/* connection parameters per direction */
+	u_int8_t	state;		/* state of the connection (enum tcp_conntrack) */
+	/* For detecting stale connections */
+	u_int8_t	last_dir;	/* Direction of the last packet (enum ip_conntrack_dir) */
+	u_int8_t	retrans;	/* Number of retransmitted packets */
+	u_int8_t	last_index;	/* Index of the last packet */
+	u_int32_t	last_seq;	/* Last sequence number seen in dir */
+	u_int32_t	last_ack;	/* Last sequence number seen in opposite dir */
+	u_int32_t	last_end;	/* Last seq + len */
+};
+
+#endif /* _IP_CONNTRACK_TCP_H */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_tftp.h b/include/linux/netfilter_ipv4/ip_conntrack_tftp.h
new file mode 100644
index 000000000000..cde9729aa173
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_tftp.h
@@ -0,0 +1,20 @@
+#ifndef _IP_CT_TFTP
+#define _IP_CT_TFTP
+
+#define TFTP_PORT 69
+
+struct tftphdr {
+	u_int16_t opcode;
+};
+
+#define TFTP_OPCODE_READ	1
+#define TFTP_OPCODE_WRITE	2
+#define TFTP_OPCODE_DATA	3
+#define TFTP_OPCODE_ACK		4
+#define TFTP_OPCODE_ERROR	5
+
+extern unsigned int (*ip_nat_tftp_hook)(struct sk_buff **pskb,
+				 enum ip_conntrack_info ctinfo,
+				 struct ip_conntrack_expect *exp);
+
+#endif /* _IP_CT_TFTP */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_tuple.h b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
new file mode 100644
index 000000000000..c33f0b5e0d0a
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
@@ -0,0 +1,145 @@
+#ifndef _IP_CONNTRACK_TUPLE_H
+#define _IP_CONNTRACK_TUPLE_H
+
+/* A `tuple' is a structure containing the information to uniquely
+  identify a connection.  ie. if two packets have the same tuple, they
+  are in the same connection; if not, they are not.
+
+  We divide the structure along "manipulatable" and
+  "non-manipulatable" lines, for the benefit of the NAT code.
+*/
+
+/* The protocol-specific manipulable parts of the tuple: always in
+   network order! */
+union ip_conntrack_manip_proto
+{
+	/* Add other protocols here. */
+	u_int16_t all;
+
+	struct {
+		u_int16_t port;
+	} tcp;
+	struct {
+		u_int16_t port;
+	} udp;
+	struct {
+		u_int16_t id;
+	} icmp;
+	struct {
+		u_int16_t port;
+	} sctp;
+};
+
+/* The manipulable part of the tuple. */
+struct ip_conntrack_manip
+{
+	u_int32_t ip;
+	union ip_conntrack_manip_proto u;
+};
+
+/* This contains the information to distinguish a connection. */
+struct ip_conntrack_tuple
+{
+	struct ip_conntrack_manip src;
+
+	/* These are the parts of the tuple which are fixed. */
+	struct {
+		u_int32_t ip;
+		union {
+			/* Add other protocols here. */
+			u_int16_t all;
+
+			struct {
+				u_int16_t port;
+			} tcp;
+			struct {
+				u_int16_t port;
+			} udp;
+			struct {
+				u_int8_t type, code;
+			} icmp;
+			struct {
+				u_int16_t port;
+			} sctp;
+		} u;
+
+		/* The protocol. */
+		u_int8_t protonum;
+
+		/* The direction (for tuplehash) */
+		u_int8_t dir;
+	} dst;
+};
+
+/* This is optimized opposed to a memset of the whole structure.  Everything we
+ * really care about is the  source/destination unions */
+#define IP_CT_TUPLE_U_BLANK(tuple) 				\
+	do {							\
+		(tuple)->src.u.all = 0;				\
+		(tuple)->dst.u.all = 0;				\
+	} while (0)
+
+enum ip_conntrack_dir
+{
+	IP_CT_DIR_ORIGINAL,
+	IP_CT_DIR_REPLY,
+	IP_CT_DIR_MAX
+};
+
+#ifdef __KERNEL__
+
+#define DUMP_TUPLE(tp)						\
+DEBUGP("tuple %p: %u %u.%u.%u.%u:%hu -> %u.%u.%u.%u:%hu\n",	\
+       (tp), (tp)->dst.protonum,				\
+       NIPQUAD((tp)->src.ip), ntohs((tp)->src.u.all),		\
+       NIPQUAD((tp)->dst.ip), ntohs((tp)->dst.u.all))
+
+#define CTINFO2DIR(ctinfo) ((ctinfo) >= IP_CT_IS_REPLY ? IP_CT_DIR_REPLY : IP_CT_DIR_ORIGINAL)
+
+/* If we're the first tuple, it's the original dir. */
+#define DIRECTION(h) ((enum ip_conntrack_dir)(h)->tuple.dst.dir)
+
+/* Connections have two entries in the hash table: one for each way */
+struct ip_conntrack_tuple_hash
+{
+	struct list_head list;
+
+	struct ip_conntrack_tuple tuple;
+};
+
+#endif /* __KERNEL__ */
+
+static inline int ip_ct_tuple_src_equal(const struct ip_conntrack_tuple *t1,
+				        const struct ip_conntrack_tuple *t2)
+{
+	return t1->src.ip == t2->src.ip
+		&& t1->src.u.all == t2->src.u.all;
+}
+
+static inline int ip_ct_tuple_dst_equal(const struct ip_conntrack_tuple *t1,
+				        const struct ip_conntrack_tuple *t2)
+{
+	return t1->dst.ip == t2->dst.ip
+		&& t1->dst.u.all == t2->dst.u.all
+		&& t1->dst.protonum == t2->dst.protonum;
+}
+
+static inline int ip_ct_tuple_equal(const struct ip_conntrack_tuple *t1,
+				    const struct ip_conntrack_tuple *t2)
+{
+	return ip_ct_tuple_src_equal(t1, t2) && ip_ct_tuple_dst_equal(t1, t2);
+}
+
+static inline int ip_ct_tuple_mask_cmp(const struct ip_conntrack_tuple *t,
+				       const struct ip_conntrack_tuple *tuple,
+				       const struct ip_conntrack_tuple *mask)
+{
+	return !(((t->src.ip ^ tuple->src.ip) & mask->src.ip)
+		 || ((t->dst.ip ^ tuple->dst.ip) & mask->dst.ip)
+		 || ((t->src.u.all ^ tuple->src.u.all) & mask->src.u.all)
+		 || ((t->dst.u.all ^ tuple->dst.u.all) & mask->dst.u.all)
+		 || ((t->dst.protonum ^ tuple->dst.protonum)
+		     & mask->dst.protonum));
+}
+
+#endif /* _IP_CONNTRACK_TUPLE_H */
diff --git a/include/linux/netfilter_ipv4/ip_logging.h b/include/linux/netfilter_ipv4/ip_logging.h
new file mode 100644
index 000000000000..0c5c52cb6589
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_logging.h
@@ -0,0 +1,20 @@
+/* IPv4 macros for the internal logging interface. */
+#ifndef __IP_LOGGING_H
+#define __IP_LOGGING_H
+
+#ifdef __KERNEL__
+#include <linux/socket.h>
+#include <linux/netfilter_logging.h>
+
+#define nf_log_ip_packet(pskb,hooknum,in,out,fmt,args...) \
+	nf_log_packet(AF_INET,pskb,hooknum,in,out,fmt,##args)
+
+#define nf_log_ip(pfh,len,fmt,args...) \
+	nf_log(AF_INET,pfh,len,fmt,##args)
+
+#define nf_ip_log_register(logging) nf_log_register(AF_INET,logging)
+#define nf_ip_log_unregister(logging) nf_log_unregister(AF_INET,logging)
+	
+#endif /*__KERNEL__*/
+
+#endif /*__IP_LOGGING_H*/
diff --git a/include/linux/netfilter_ipv4/ip_nat.h b/include/linux/netfilter_ipv4/ip_nat.h
new file mode 100644
index 000000000000..2b72b86176f0
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_nat.h
@@ -0,0 +1,87 @@
+#ifndef _IP_NAT_H
+#define _IP_NAT_H
+#include <linux/netfilter_ipv4.h>
+#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
+
+#define IP_NAT_MAPPING_TYPE_MAX_NAMELEN 16
+
+enum ip_nat_manip_type
+{
+	IP_NAT_MANIP_SRC,
+	IP_NAT_MANIP_DST
+};
+
+/* SRC manip occurs POST_ROUTING or LOCAL_IN */
+#define HOOK2MANIP(hooknum) ((hooknum) != NF_IP_POST_ROUTING && (hooknum) != NF_IP_LOCAL_IN)
+
+#define IP_NAT_RANGE_MAP_IPS 1
+#define IP_NAT_RANGE_PROTO_SPECIFIED 2
+
+/* NAT sequence number modifications */
+struct ip_nat_seq {
+	/* position of the last TCP sequence number 
+	 * modification (if any) */
+	u_int32_t correction_pos;
+	/* sequence number offset before and after last modification */
+	int32_t offset_before, offset_after;
+};
+
+/* Single range specification. */
+struct ip_nat_range
+{
+	/* Set to OR of flags above. */
+	unsigned int flags;
+
+	/* Inclusive: network order. */
+	u_int32_t min_ip, max_ip;
+
+	/* Inclusive: network order */
+	union ip_conntrack_manip_proto min, max;
+};
+
+/* For backwards compat: don't use in modern code. */
+struct ip_nat_multi_range_compat
+{
+	unsigned int rangesize; /* Must be 1. */
+
+	/* hangs off end. */
+	struct ip_nat_range range[1];
+};
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/lockhelp.h>
+
+/* Protects NAT hash tables, and NAT-private part of conntracks. */
+DECLARE_RWLOCK_EXTERN(ip_nat_lock);
+
+/* The structure embedded in the conntrack structure. */
+struct ip_nat_info
+{
+	struct list_head bysource;
+
+	/* Helper (NULL if none). */
+	struct ip_nat_helper *helper;
+
+	struct ip_nat_seq seq[IP_CT_DIR_MAX];
+};
+
+struct ip_conntrack;
+
+/* Set up the info structure to map into this range. */
+extern unsigned int ip_nat_setup_info(struct ip_conntrack *conntrack,
+				      const struct ip_nat_range *range,
+				      unsigned int hooknum);
+
+/* Is this tuple already taken? (not by us)*/
+extern int ip_nat_used_tuple(const struct ip_conntrack_tuple *tuple,
+			     const struct ip_conntrack *ignored_conntrack);
+
+/* Calculate relative checksum. */
+extern u_int16_t ip_nat_cheat_check(u_int32_t oldvalinv,
+				    u_int32_t newval,
+				    u_int16_t oldcheck);
+#else  /* !__KERNEL__: iptables wants this to compile. */
+#define ip_nat_multi_range ip_nat_multi_range_compat
+#endif /*__KERNEL__*/
+#endif
diff --git a/include/linux/netfilter_ipv4/ip_nat_core.h b/include/linux/netfilter_ipv4/ip_nat_core.h
new file mode 100644
index 000000000000..3b50eb91f007
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_nat_core.h
@@ -0,0 +1,20 @@
+#ifndef _IP_NAT_CORE_H
+#define _IP_NAT_CORE_H
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+
+/* This header used to share core functionality between the standalone
+   NAT module, and the compatibility layer's use of NAT for masquerading. */
+extern int ip_nat_init(void);
+extern void ip_nat_cleanup(void);
+
+extern unsigned int nat_packet(struct ip_conntrack *ct,
+			       enum ip_conntrack_info conntrackinfo,
+			       unsigned int hooknum,
+			       struct sk_buff **pskb);
+
+extern int icmp_reply_translation(struct sk_buff **pskb,
+				  struct ip_conntrack *ct,
+				  enum ip_nat_manip_type manip,
+				  enum ip_conntrack_dir dir);
+#endif /* _IP_NAT_CORE_H */
diff --git a/include/linux/netfilter_ipv4/ip_nat_helper.h b/include/linux/netfilter_ipv4/ip_nat_helper.h
new file mode 100644
index 000000000000..bf9cb105c885
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_nat_helper.h
@@ -0,0 +1,33 @@
+#ifndef _IP_NAT_HELPER_H
+#define _IP_NAT_HELPER_H
+/* NAT protocol helper routines. */
+
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+#include <linux/module.h>
+
+struct sk_buff;
+
+/* These return true or false. */
+extern int ip_nat_mangle_tcp_packet(struct sk_buff **skb,
+				struct ip_conntrack *ct,
+				enum ip_conntrack_info ctinfo,
+				unsigned int match_offset,
+				unsigned int match_len,
+				const char *rep_buffer,
+				unsigned int rep_len);
+extern int ip_nat_mangle_udp_packet(struct sk_buff **skb,
+				struct ip_conntrack *ct,
+				enum ip_conntrack_info ctinfo,
+				unsigned int match_offset,
+				unsigned int match_len,
+				const char *rep_buffer,
+				unsigned int rep_len);
+extern int ip_nat_seq_adjust(struct sk_buff **pskb, 
+			     struct ip_conntrack *ct, 
+			     enum ip_conntrack_info ctinfo);
+
+/* Setup NAT on this expected conntrack so it follows master, but goes
+ * to port ct->master->saved_proto. */
+extern void ip_nat_follow_master(struct ip_conntrack *ct,
+				 struct ip_conntrack_expect *this);
+#endif
diff --git a/include/linux/netfilter_ipv4/ip_nat_protocol.h b/include/linux/netfilter_ipv4/ip_nat_protocol.h
new file mode 100644
index 000000000000..129708c22386
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_nat_protocol.h
@@ -0,0 +1,70 @@
+/* Header for use in defining a given protocol. */
+#ifndef _IP_NAT_PROTOCOL_H
+#define _IP_NAT_PROTOCOL_H
+#include <linux/init.h>
+#include <linux/list.h>
+
+struct iphdr;
+struct ip_nat_range;
+
+struct ip_nat_protocol
+{
+	/* Protocol name */
+	const char *name;
+
+	/* Protocol number. */
+	unsigned int protonum;
+
+	/* Translate a packet to the target according to manip type.
+	   Return true if succeeded. */
+	int (*manip_pkt)(struct sk_buff **pskb,
+			 unsigned int iphdroff,
+			 const struct ip_conntrack_tuple *tuple,
+			 enum ip_nat_manip_type maniptype);
+
+	/* Is the manipable part of the tuple between min and max incl? */
+	int (*in_range)(const struct ip_conntrack_tuple *tuple,
+			enum ip_nat_manip_type maniptype,
+			const union ip_conntrack_manip_proto *min,
+			const union ip_conntrack_manip_proto *max);
+
+	/* Alter the per-proto part of the tuple (depending on
+	   maniptype), to give a unique tuple in the given range if
+	   possible; return false if not.  Per-protocol part of tuple
+	   is initialized to the incoming packet. */
+	int (*unique_tuple)(struct ip_conntrack_tuple *tuple,
+			    const struct ip_nat_range *range,
+			    enum ip_nat_manip_type maniptype,
+			    const struct ip_conntrack *conntrack);
+
+	unsigned int (*print)(char *buffer,
+			      const struct ip_conntrack_tuple *match,
+			      const struct ip_conntrack_tuple *mask);
+
+	unsigned int (*print_range)(char *buffer,
+				    const struct ip_nat_range *range);
+};
+
+#define MAX_IP_NAT_PROTO 256
+extern struct ip_nat_protocol *ip_nat_protos[MAX_IP_NAT_PROTO];
+
+/* Protocol registration. */
+extern int ip_nat_protocol_register(struct ip_nat_protocol *proto);
+extern void ip_nat_protocol_unregister(struct ip_nat_protocol *proto);
+
+static inline struct ip_nat_protocol *ip_nat_find_proto(u_int8_t protocol)
+{
+	return ip_nat_protos[protocol];
+}
+
+/* Built-in protocols. */
+extern struct ip_nat_protocol ip_nat_protocol_tcp;
+extern struct ip_nat_protocol ip_nat_protocol_udp;
+extern struct ip_nat_protocol ip_nat_protocol_icmp;
+extern struct ip_nat_protocol ip_nat_unknown_protocol;
+
+extern int init_protocols(void) __init;
+extern void cleanup_protocols(void);
+extern struct ip_nat_protocol *find_nat_proto(u_int16_t protonum);
+
+#endif /*_IP_NAT_PROTO_H*/
diff --git a/include/linux/netfilter_ipv4/ip_nat_rule.h b/include/linux/netfilter_ipv4/ip_nat_rule.h
new file mode 100644
index 000000000000..fecd2a06dcd8
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_nat_rule.h
@@ -0,0 +1,23 @@
+#ifndef _IP_NAT_RULE_H
+#define _IP_NAT_RULE_H
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/netfilter_ipv4/ip_nat.h>
+
+#ifdef __KERNEL__
+
+extern int ip_nat_rule_init(void) __init;
+extern void ip_nat_rule_cleanup(void);
+extern int ip_nat_rule_find(struct sk_buff **pskb,
+			    unsigned int hooknum,
+			    const struct net_device *in,
+			    const struct net_device *out,
+			    struct ip_conntrack *ct,
+			    struct ip_nat_info *info);
+
+extern unsigned int
+alloc_null_binding(struct ip_conntrack *conntrack,
+		   struct ip_nat_info *info,
+		   unsigned int hooknum);
+#endif
+#endif /* _IP_NAT_RULE_H */
diff --git a/include/linux/netfilter_ipv4/ip_queue.h b/include/linux/netfilter_ipv4/ip_queue.h
new file mode 100644
index 000000000000..aa08d68c4841
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_queue.h
@@ -0,0 +1,72 @@
+/*
+ * This is a module which is used for queueing IPv4 packets and
+ * communicating with userspace via netlink.
+ *
+ * (C) 2000 James Morris, this code is GPL.
+ */
+#ifndef _IP_QUEUE_H
+#define _IP_QUEUE_H
+
+#ifdef __KERNEL__
+#ifdef DEBUG_IPQ
+#define QDEBUG(x...) printk(KERN_DEBUG ## x)
+#else
+#define QDEBUG(x...)
+#endif  /* DEBUG_IPQ */
+#else
+#include <net/if.h>
+#endif	/* ! __KERNEL__ */
+
+/* Messages sent from kernel */
+typedef struct ipq_packet_msg {
+	unsigned long packet_id;	/* ID of queued packet */
+	unsigned long mark;		/* Netfilter mark value */
+	long timestamp_sec;		/* Packet arrival time (seconds) */
+	long timestamp_usec;		/* Packet arrvial time (+useconds) */
+	unsigned int hook;		/* Netfilter hook we rode in on */
+	char indev_name[IFNAMSIZ];	/* Name of incoming interface */
+	char outdev_name[IFNAMSIZ];	/* Name of outgoing interface */
+	unsigned short hw_protocol;	/* Hardware protocol (network order) */
+	unsigned short hw_type;		/* Hardware type */
+	unsigned char hw_addrlen;	/* Hardware address length */
+	unsigned char hw_addr[8];	/* Hardware address */
+	size_t data_len;		/* Length of packet data */
+	unsigned char payload[0];	/* Optional packet data */
+} ipq_packet_msg_t;
+
+/* Messages sent from userspace */
+typedef struct ipq_mode_msg {
+	unsigned char value;		/* Requested mode */
+	size_t range;			/* Optional range of packet requested */
+} ipq_mode_msg_t;
+
+typedef struct ipq_verdict_msg {
+	unsigned int value;		/* Verdict to hand to netfilter */
+	unsigned long id;		/* Packet ID for this verdict */
+	size_t data_len;		/* Length of replacement data */
+	unsigned char payload[0];	/* Optional replacement packet */
+} ipq_verdict_msg_t;
+
+typedef struct ipq_peer_msg {
+	union {
+		ipq_verdict_msg_t verdict;
+		ipq_mode_msg_t mode;
+	} msg;
+} ipq_peer_msg_t;
+
+/* Packet delivery modes */
+enum {
+	IPQ_COPY_NONE,		/* Initial mode, packets are dropped */
+	IPQ_COPY_META,		/* Copy metadata */
+	IPQ_COPY_PACKET		/* Copy metadata + packet (range) */
+};
+#define IPQ_COPY_MAX IPQ_COPY_PACKET
+
+/* Types of messages */
+#define IPQM_BASE	0x10	/* standard netlink messages below this */
+#define IPQM_MODE	(IPQM_BASE + 1)		/* Mode request from peer */
+#define IPQM_VERDICT	(IPQM_BASE + 2)		/* Verdict from peer */ 
+#define IPQM_PACKET	(IPQM_BASE + 3)		/* Packet from kernel */
+#define IPQM_MAX	(IPQM_BASE + 4)
+
+#endif /*_IP_QUEUE_H*/
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
new file mode 100644
index 000000000000..12ce47808e7d
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -0,0 +1,490 @@
+/*
+ * 25-Jul-1998 Major changes to allow for ip chain table
+ *
+ * 3-Jan-2000 Named tables to allow packet selection for different uses.
+ */
+
+/*
+ * 	Format of an IP firewall descriptor
+ *
+ * 	src, dst, src_mask, dst_mask are always stored in network byte order.
+ * 	flags are stored in host byte order (of course).
+ * 	Port numbers are stored in HOST byte order.
+ */
+
+#ifndef _IPTABLES_H
+#define _IPTABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/netfilter_ipv4.h>
+
+#define IPT_FUNCTION_MAXNAMELEN 30
+#define IPT_TABLE_MAXNAMELEN 32
+
+/* Yes, Virginia, you have to zero the padding. */
+struct ipt_ip {
+	/* Source and destination IP addr */
+	struct in_addr src, dst;
+	/* Mask for src and dest IP addr */
+	struct in_addr smsk, dmsk;
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* Protocol, 0 = ANY */
+	u_int16_t proto;
+
+	/* Flags word */
+	u_int8_t flags;
+	/* Inverse flags */
+	u_int8_t invflags;
+};
+
+struct ipt_entry_match
+{
+	union {
+		struct {
+			u_int16_t match_size;
+
+			/* Used by userspace */
+			char name[IPT_FUNCTION_MAXNAMELEN-1];
+
+			u_int8_t revision;
+		} user;
+		struct {
+			u_int16_t match_size;
+
+			/* Used inside the kernel */
+			struct ipt_match *match;
+		} kernel;
+
+		/* Total length */
+		u_int16_t match_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct ipt_entry_target
+{
+	union {
+		struct {
+			u_int16_t target_size;
+
+			/* Used by userspace */
+			char name[IPT_FUNCTION_MAXNAMELEN-1];
+
+			u_int8_t revision;
+		} user;
+		struct {
+			u_int16_t target_size;
+
+			/* Used inside the kernel */
+			struct ipt_target *target;
+		} kernel;
+
+		/* Total length */
+		u_int16_t target_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct ipt_standard_target
+{
+	struct ipt_entry_target target;
+	int verdict;
+};
+
+struct ipt_counters
+{
+	u_int64_t pcnt, bcnt;			/* Packet and byte counters */
+};
+
+/* Values for "flag" field in struct ipt_ip (general ip structure). */
+#define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+#define IPT_F_MASK		0x01	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct ipt_ip. */
+#define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+#define IPT_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
+#define IPT_INV_TOS		0x04	/* Invert the sense of TOS. */
+#define IPT_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
+#define IPT_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
+#define IPT_INV_FRAG		0x20	/* Invert the sense of FRAG. */
+#define IPT_INV_PROTO		0x40	/* Invert the sense of PROTO. */
+#define IPT_INV_MASK		0x7F	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general IP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct ipt_entry
+{
+	struct ipt_ip ip;
+
+	/* Mark with fields that we care about. */
+	unsigned int nfcache;
+
+	/* Size of ipt_entry + matches */
+	u_int16_t target_offset;
+	/* Size of ipt_entry + matches + target */
+	u_int16_t next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct ipt_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use a raw
+ * socket for this. Instead we check rights in the calls. */
+#define IPT_BASE_CTL		64	/* base for firewall socket options */
+
+#define IPT_SO_SET_REPLACE	(IPT_BASE_CTL)
+#define IPT_SO_SET_ADD_COUNTERS	(IPT_BASE_CTL + 1)
+#define IPT_SO_SET_MAX		IPT_SO_SET_ADD_COUNTERS
+
+#define IPT_SO_GET_INFO			(IPT_BASE_CTL)
+#define IPT_SO_GET_ENTRIES		(IPT_BASE_CTL + 1)
+#define IPT_SO_GET_REVISION_MATCH	(IPT_BASE_CTL + 2)
+#define IPT_SO_GET_REVISION_TARGET	(IPT_BASE_CTL + 3)
+#define IPT_SO_GET_MAX			IPT_SO_GET_REVISION_TARGET
+
+/* CONTINUE verdict for targets */
+#define IPT_CONTINUE 0xFFFFFFFF
+
+/* For standard target */
+#define IPT_RETURN (-NF_REPEAT - 1)
+
+/* TCP matching stuff */
+struct ipt_tcp
+{
+	u_int16_t spts[2];			/* Source port range. */
+	u_int16_t dpts[2];			/* Destination port range. */
+	u_int8_t option;			/* TCP Option iff non-zero*/
+	u_int8_t flg_mask;			/* TCP flags mask byte */
+	u_int8_t flg_cmp;			/* TCP flags compare byte */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "inv" field in struct ipt_tcp. */
+#define IPT_TCP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define IPT_TCP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define IPT_TCP_INV_FLAGS	0x04	/* Invert the sense of TCP flags. */
+#define IPT_TCP_INV_OPTION	0x08	/* Invert the sense of option test. */
+#define IPT_TCP_INV_MASK	0x0F	/* All possible flags. */
+
+/* UDP matching stuff */
+struct ipt_udp
+{
+	u_int16_t spts[2];			/* Source port range. */
+	u_int16_t dpts[2];			/* Destination port range. */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "invflags" field in struct ipt_udp. */
+#define IPT_UDP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define IPT_UDP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define IPT_UDP_INV_MASK	0x03	/* All possible flags. */
+
+/* ICMP matching stuff */
+struct ipt_icmp
+{
+	u_int8_t type;				/* type to match */
+	u_int8_t code[2];			/* range of code */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "inv" field for struct ipt_icmp. */
+#define IPT_ICMP_INV	0x01	/* Invert the sense of type/code test */
+
+/* The argument to IPT_SO_GET_INFO */
+struct ipt_getinfo
+{
+	/* Which table: caller fills this in. */
+	char name[IPT_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_IP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_IP_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to IPT_SO_SET_REPLACE. */
+struct ipt_replace
+{
+	/* Which table. */
+	char name[IPT_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_IP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_IP_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct ipt_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct ipt_entry entries[0];
+};
+
+/* The argument to IPT_SO_ADD_COUNTERS. */
+struct ipt_counters_info
+{
+	/* Which table. */
+	char name[IPT_TABLE_MAXNAMELEN];
+
+	unsigned int num_counters;
+
+	/* The counters (actually `number' of these). */
+	struct ipt_counters counters[0];
+};
+
+/* The argument to IPT_SO_GET_ENTRIES. */
+struct ipt_get_entries
+{
+	/* Which table: user fills this in. */
+	char name[IPT_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct ipt_entry entrytable[0];
+};
+
+/* The argument to IPT_SO_GET_REVISION_*.  Returns highest revision
+ * kernel supports, if >= revision. */
+struct ipt_get_revision
+{
+	char name[IPT_FUNCTION_MAXNAMELEN-1];
+
+	u_int8_t revision;
+};
+
+/* Standard return verdict, or do jump. */
+#define IPT_STANDARD_TARGET ""
+/* Error verdict. */
+#define IPT_ERROR_TARGET "ERROR"
+
+/* Helper functions */
+static __inline__ struct ipt_entry_target *
+ipt_get_target(struct ipt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/* fn returns 0 to continue iteration */
+#define IPT_MATCH_ITERATE(e, fn, args...)	\
+({						\
+	unsigned int __i;			\
+	int __ret = 0;				\
+	struct ipt_entry_match *__match;	\
+						\
+	for (__i = sizeof(struct ipt_entry);	\
+	     __i < (e)->target_offset;		\
+	     __i += __match->u.match_size) {	\
+		__match = (void *)(e) + __i;	\
+						\
+		__ret = fn(__match , ## args);	\
+		if (__ret != 0)			\
+			break;			\
+	}					\
+	__ret;					\
+})
+
+/* fn returns 0 to continue iteration */
+#define IPT_ENTRY_ITERATE(entries, size, fn, args...)		\
+({								\
+	unsigned int __i;					\
+	int __ret = 0;						\
+	struct ipt_entry *__entry;				\
+								\
+	for (__i = 0; __i < (size); __i += __entry->next_offset) { \
+		__entry = (void *)(entries) + __i;		\
+								\
+		__ret = fn(__entry , ## args);			\
+		if (__ret != 0)					\
+			break;					\
+	}							\
+	__ret;							\
+})
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+extern void ipt_init(void) __init;
+
+struct ipt_match
+{
+	struct list_head list;
+
+	const char name[IPT_FUNCTION_MAXNAMELEN-1];
+
+	u_int8_t revision;
+
+	/* Return true or false: return FALSE and set *hotdrop = 1 to
+           force immediate packet drop. */
+	/* Arguments changed since 2.4, as this must now handle
+           non-linear skbs, using skb_copy_bits and
+           skb_ip_make_writable. */
+	int (*match)(const struct sk_buff *skb,
+		     const struct net_device *in,
+		     const struct net_device *out,
+		     const void *matchinfo,
+		     int offset,
+		     int *hotdrop);
+
+	/* Called when user tries to insert an entry of this type. */
+	/* Should return true or false. */
+	int (*checkentry)(const char *tablename,
+			  const struct ipt_ip *ip,
+			  void *matchinfo,
+			  unsigned int matchinfosize,
+			  unsigned int hook_mask);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(void *matchinfo, unsigned int matchinfosize);
+
+	/* Set this to THIS_MODULE. */
+	struct module *me;
+};
+
+/* Registration hooks for targets. */
+struct ipt_target
+{
+	struct list_head list;
+
+	const char name[IPT_FUNCTION_MAXNAMELEN-1];
+
+	u_int8_t revision;
+
+	/* Called when user tries to insert an entry of this type:
+           hook_mask is a bitmask of hooks from which it can be
+           called. */
+	/* Should return true or false. */
+	int (*checkentry)(const char *tablename,
+			  const struct ipt_entry *e,
+			  void *targinfo,
+			  unsigned int targinfosize,
+			  unsigned int hook_mask);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(void *targinfo, unsigned int targinfosize);
+
+	/* Returns verdict.  Argument order changed since 2.4, as this
+           must now handle non-linear skbs, using skb_copy_bits and
+           skb_ip_make_writable. */
+	unsigned int (*target)(struct sk_buff **pskb,
+			       const struct net_device *in,
+			       const struct net_device *out,
+			       unsigned int hooknum,
+			       const void *targinfo,
+			       void *userdata);
+
+	/* Set this to THIS_MODULE. */
+	struct module *me;
+};
+
+extern int ipt_register_target(struct ipt_target *target);
+extern void ipt_unregister_target(struct ipt_target *target);
+
+extern int ipt_register_match(struct ipt_match *match);
+extern void ipt_unregister_match(struct ipt_match *match);
+
+/* Furniture shopping... */
+struct ipt_table
+{
+	struct list_head list;
+
+	/* A unique name... */
+	char name[IPT_TABLE_MAXNAMELEN];
+
+	/* What hooks you will enter on */
+	unsigned int valid_hooks;
+
+	/* Lock for the curtain */
+	rwlock_t lock;
+
+	/* Man behind the curtain... */
+	struct ipt_table_info *private;
+
+	/* Set to THIS_MODULE. */
+	struct module *me;
+};
+
+/* net/sched/ipt.c: Gimme access to your targets!  Gets target->me. */
+extern struct ipt_target *ipt_find_target(const char *name, u8 revision);
+
+/* Standard entry. */
+struct ipt_standard
+{
+	struct ipt_entry entry;
+	struct ipt_standard_target target;
+};
+
+struct ipt_error_target
+{
+	struct ipt_entry_target target;
+	char errorname[IPT_FUNCTION_MAXNAMELEN];
+};
+
+struct ipt_error
+{
+	struct ipt_entry entry;
+	struct ipt_error_target target;
+};
+
+extern int ipt_register_table(struct ipt_table *table,
+			      const struct ipt_replace *repl);
+extern void ipt_unregister_table(struct ipt_table *table);
+extern unsigned int ipt_do_table(struct sk_buff **pskb,
+				 unsigned int hook,
+				 const struct net_device *in,
+				 const struct net_device *out,
+				 struct ipt_table *table,
+				 void *userdata);
+
+#define IPT_ALIGN(s) (((s) + (__alignof__(struct ipt_entry)-1)) & ~(__alignof__(struct ipt_entry)-1))
+#endif /*__KERNEL__*/
+#endif /* _IPTABLES_H */
diff --git a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h b/include/linux/netfilter_ipv4/ipt_CLASSIFY.h
new file mode 100644
index 000000000000..7596e3dd00ca
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_CLASSIFY.h
@@ -0,0 +1,8 @@
+#ifndef _IPT_CLASSIFY_H
+#define _IPT_CLASSIFY_H
+
+struct ipt_classify_target_info {
+	u_int32_t priority;
+};
+
+#endif /*_IPT_CLASSIFY_H */
diff --git a/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
new file mode 100644
index 000000000000..baa83e757156
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
@@ -0,0 +1,32 @@
+#ifndef _IPT_CLUSTERIP_H_target
+#define _IPT_CLUSTERIP_H_target
+
+enum clusterip_hashmode {
+    CLUSTERIP_HASHMODE_SIP = 0,
+    CLUSTERIP_HASHMODE_SIP_SPT,
+    CLUSTERIP_HASHMODE_SIP_SPT_DPT,
+};
+
+#define CLUSTERIP_HASHMODE_MAX CLUSTERIP_HASHMODE_SIP_SPT_DPT
+
+#define CLUSTERIP_MAX_NODES 16
+
+#define CLUSTERIP_FLAG_NEW 0x00000001
+
+struct clusterip_config;
+
+struct ipt_clusterip_tgt_info {
+
+	u_int32_t flags;
+	struct clusterip_config *config;
+	
+	/* only relevant for new ones */
+	u_int8_t clustermac[6];
+	u_int16_t num_total_nodes;
+	u_int16_t num_local_nodes;
+	u_int16_t local_nodes[CLUSTERIP_MAX_NODES];
+	enum clusterip_hashmode hash_mode;
+	u_int32_t hash_initval;
+};
+
+#endif /*_IPT_CLUSTERIP_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_CONNMARK.h b/include/linux/netfilter_ipv4/ipt_CONNMARK.h
new file mode 100644
index 000000000000..d3c02536fc4c
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_CONNMARK.h
@@ -0,0 +1,25 @@
+#ifndef _IPT_CONNMARK_H_target
+#define _IPT_CONNMARK_H_target
+
+/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
+ * by Henrik Nordstrom <hno@marasystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+enum {
+	IPT_CONNMARK_SET = 0,
+	IPT_CONNMARK_SAVE,
+	IPT_CONNMARK_RESTORE
+};
+
+struct ipt_connmark_target_info {
+	unsigned long mark;
+	unsigned long mask;
+	u_int8_t mode;
+};
+
+#endif /*_IPT_CONNMARK_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_DSCP.h b/include/linux/netfilter_ipv4/ipt_DSCP.h
new file mode 100644
index 000000000000..b30f510b5bef
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_DSCP.h
@@ -0,0 +1,20 @@
+/* iptables module for setting the IPv4 DSCP field
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh <mgm@paktronix.com>
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * See RFC2474 for a description of the DSCP field within the IP Header.
+ *
+ * ipt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp
+*/
+#ifndef _IPT_DSCP_TARGET_H
+#define _IPT_DSCP_TARGET_H
+#include <linux/netfilter_ipv4/ipt_dscp.h>
+
+/* target info */
+struct ipt_DSCP_info {
+	u_int8_t dscp;
+};
+
+#endif /* _IPT_DSCP_TARGET_H */
diff --git a/include/linux/netfilter_ipv4/ipt_ECN.h b/include/linux/netfilter_ipv4/ipt_ECN.h
new file mode 100644
index 000000000000..94e0d9866469
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ECN.h
@@ -0,0 +1,31 @@
+/* Header file for iptables ipt_ECN target
+ *
+ * (C) 2002 by Harald Welte <laforge@gnumonks.org>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * ipt_ECN.h,v 1.3 2002/05/29 12:17:40 laforge Exp
+*/
+#ifndef _IPT_ECN_TARGET_H
+#define _IPT_ECN_TARGET_H
+#include <linux/netfilter_ipv4/ipt_DSCP.h>
+
+#define IPT_ECN_IP_MASK	(~IPT_DSCP_MASK)
+
+#define IPT_ECN_OP_SET_IP	0x01	/* set ECN bits of IPv4 header */
+#define IPT_ECN_OP_SET_ECE	0x10	/* set ECE bit of TCP header */
+#define IPT_ECN_OP_SET_CWR	0x20	/* set CWR bit of TCP header */
+
+#define IPT_ECN_OP_MASK		0xce
+
+struct ipt_ECN_info {
+	u_int8_t operation;	/* bitset of operations */
+	u_int8_t ip_ect;	/* ECT codepoint of IPv4 header, pre-shifted */
+	union {
+		struct {
+			u_int8_t ece:1, cwr:1; /* TCP ECT bits */
+		} tcp;
+	} proto;
+};
+
+#endif /* _IPT_ECN_TARGET_H */
diff --git a/include/linux/netfilter_ipv4/ipt_LOG.h b/include/linux/netfilter_ipv4/ipt_LOG.h
new file mode 100644
index 000000000000..d25f782e57d1
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_LOG.h
@@ -0,0 +1,16 @@
+#ifndef _IPT_LOG_H
+#define _IPT_LOG_H
+
+#define IPT_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define IPT_LOG_TCPOPT		0x02	/* Log TCP options */
+#define IPT_LOG_IPOPT		0x04	/* Log IP options */
+#define IPT_LOG_UID		0x08	/* Log UID owning local socket */
+#define IPT_LOG_MASK		0x0f
+
+struct ipt_log_info {
+	unsigned char level;
+	unsigned char logflags;
+	char prefix[30];
+};
+
+#endif /*_IPT_LOG_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_MARK.h b/include/linux/netfilter_ipv4/ipt_MARK.h
new file mode 100644
index 000000000000..f47485790ed4
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_MARK.h
@@ -0,0 +1,20 @@
+#ifndef _IPT_MARK_H_target
+#define _IPT_MARK_H_target
+
+/* Version 0 */
+struct ipt_mark_target_info {
+	unsigned long mark;
+};
+
+/* Version 1 */
+enum {
+	IPT_MARK_SET=0,
+	IPT_MARK_AND,
+	IPT_MARK_OR
+};
+
+struct ipt_mark_target_info_v1 {
+	unsigned long mark;
+	u_int8_t mode;
+};
+#endif /*_IPT_MARK_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_REJECT.h b/include/linux/netfilter_ipv4/ipt_REJECT.h
new file mode 100644
index 000000000000..4293a1ad1b01
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_REJECT.h
@@ -0,0 +1,20 @@
+#ifndef _IPT_REJECT_H
+#define _IPT_REJECT_H
+
+enum ipt_reject_with {
+	IPT_ICMP_NET_UNREACHABLE,
+	IPT_ICMP_HOST_UNREACHABLE,
+	IPT_ICMP_PROT_UNREACHABLE,
+	IPT_ICMP_PORT_UNREACHABLE,
+	IPT_ICMP_ECHOREPLY,
+	IPT_ICMP_NET_PROHIBITED,
+	IPT_ICMP_HOST_PROHIBITED,
+	IPT_TCP_RESET,
+	IPT_ICMP_ADMIN_PROHIBITED
+};
+
+struct ipt_reject_info {
+	enum ipt_reject_with with;      /* reject type */
+};
+
+#endif /*_IPT_REJECT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_SAME.h b/include/linux/netfilter_ipv4/ipt_SAME.h
new file mode 100644
index 000000000000..cc4c0b2269af
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_SAME.h
@@ -0,0 +1,19 @@
+#ifndef _IPT_SAME_H
+#define _IPT_SAME_H
+
+#define IPT_SAME_MAX_RANGE	10
+
+#define IPT_SAME_NODST		0x01
+
+struct ipt_same_info
+{
+	unsigned char info;
+	u_int32_t rangesize;
+	u_int32_t ipnum;
+	u_int32_t *iparray;
+
+	/* hangs off end. */
+	struct ip_nat_range range[IPT_SAME_MAX_RANGE];
+};
+
+#endif /*_IPT_SAME_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_TCPMSS.h b/include/linux/netfilter_ipv4/ipt_TCPMSS.h
new file mode 100644
index 000000000000..aadb39580cd3
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_TCPMSS.h
@@ -0,0 +1,10 @@
+#ifndef _IPT_TCPMSS_H
+#define _IPT_TCPMSS_H
+
+struct ipt_tcpmss_info {
+	u_int16_t mss;
+};
+
+#define IPT_TCPMSS_CLAMP_PMTU 0xffff
+
+#endif /*_IPT_TCPMSS_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_TOS.h b/include/linux/netfilter_ipv4/ipt_TOS.h
new file mode 100644
index 000000000000..6bf9e1fdfd88
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_TOS.h
@@ -0,0 +1,12 @@
+#ifndef _IPT_TOS_H_target
+#define _IPT_TOS_H_target
+
+#ifndef IPTOS_NORMALSVC
+#define IPTOS_NORMALSVC 0
+#endif
+
+struct ipt_tos_target_info {
+	u_int8_t tos;
+};
+
+#endif /*_IPT_TOS_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_ULOG.h b/include/linux/netfilter_ipv4/ipt_ULOG.h
new file mode 100644
index 000000000000..417aad280bcc
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ULOG.h
@@ -0,0 +1,49 @@
+/* Header file for IP tables userspace logging, Version 1.8
+ *
+ * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
+ * 
+ * Distributed under the terms of GNU GPL */
+
+#ifndef _IPT_ULOG_H
+#define _IPT_ULOG_H
+
+#ifndef NETLINK_NFLOG
+#define NETLINK_NFLOG 	5
+#endif
+
+#define ULOG_DEFAULT_NLGROUP	1
+#define ULOG_DEFAULT_QTHRESHOLD	1
+
+#define ULOG_MAC_LEN	80
+#define ULOG_PREFIX_LEN	32
+
+#define ULOG_MAX_QLEN	50
+/* Why 50? Well... there is a limit imposed by the slab cache 131000
+ * bytes. So the multipart netlink-message has to be < 131000 bytes.
+ * Assuming a standard ethernet-mtu of 1500, we could define this up
+ * to 80... but even 50 seems to be big enough. */
+
+/* private data structure for each rule with a ULOG target */
+struct ipt_ulog_info {
+	unsigned int nl_group;
+	size_t copy_range;
+	size_t qthreshold;
+	char prefix[ULOG_PREFIX_LEN];
+};
+
+/* Format of the ULOG packets passed through netlink */
+typedef struct ulog_packet_msg {
+	unsigned long mark;
+	long timestamp_sec;
+	long timestamp_usec;
+	unsigned int hook;
+	char indev_name[IFNAMSIZ];
+	char outdev_name[IFNAMSIZ];
+	size_t data_len;
+	char prefix[ULOG_PREFIX_LEN];
+	unsigned char mac_len;
+	unsigned char mac[ULOG_MAC_LEN];
+	unsigned char payload[0];
+} ulog_packet_msg_t;
+
+#endif /*_IPT_ULOG_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_addrtype.h b/include/linux/netfilter_ipv4/ipt_addrtype.h
new file mode 100644
index 000000000000..166ed01a8122
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_addrtype.h
@@ -0,0 +1,11 @@
+#ifndef _IPT_ADDRTYPE_H
+#define _IPT_ADDRTYPE_H
+
+struct ipt_addrtype_info {
+	u_int16_t	source;		/* source-type mask */
+	u_int16_t	dest;		/* dest-type mask */
+	u_int32_t	invert_source;
+	u_int32_t	invert_dest;
+};
+
+#endif
diff --git a/include/linux/netfilter_ipv4/ipt_ah.h b/include/linux/netfilter_ipv4/ipt_ah.h
new file mode 100644
index 000000000000..7b9a2ac7adb9
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ah.h
@@ -0,0 +1,16 @@
+#ifndef _IPT_AH_H
+#define _IPT_AH_H
+
+struct ipt_ah
+{
+	u_int32_t spis[2];			/* Security Parameter Index */
+	u_int8_t  invflags;			/* Inverse flags */
+};
+
+
+
+/* Values for "invflags" field in struct ipt_ah. */
+#define IPT_AH_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IPT_AH_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IPT_AH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_comment.h b/include/linux/netfilter_ipv4/ipt_comment.h
new file mode 100644
index 000000000000..85c1123c29ce
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_comment.h
@@ -0,0 +1,10 @@
+#ifndef _IPT_COMMENT_H
+#define _IPT_COMMENT_H
+
+#define IPT_MAX_COMMENT_LEN 256
+
+struct ipt_comment_info {
+	unsigned char comment[IPT_MAX_COMMENT_LEN];
+};
+
+#endif /* _IPT_COMMENT_H */
diff --git a/include/linux/netfilter_ipv4/ipt_connmark.h b/include/linux/netfilter_ipv4/ipt_connmark.h
new file mode 100644
index 000000000000..46573270d9aa
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_connmark.h
@@ -0,0 +1,18 @@
+#ifndef _IPT_CONNMARK_H
+#define _IPT_CONNMARK_H
+
+/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
+ * by Henrik Nordstrom <hno@marasystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+struct ipt_connmark_info {
+	unsigned long mark, mask;
+	u_int8_t invert;
+};
+
+#endif /*_IPT_CONNMARK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_conntrack.h b/include/linux/netfilter_ipv4/ipt_conntrack.h
new file mode 100644
index 000000000000..413c5658bd3a
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_conntrack.h
@@ -0,0 +1,60 @@
+/* Header file for kernel module to match connection tracking information.
+ * GPL (C) 2001  Marc Boucher (marc@mbsi.ca).
+ */
+
+#ifndef _IPT_CONNTRACK_H
+#define _IPT_CONNTRACK_H
+
+#define IPT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
+#define IPT_CONNTRACK_STATE_INVALID (1 << 0)
+
+#define IPT_CONNTRACK_STATE_SNAT (1 << (IP_CT_NUMBER + 1))
+#define IPT_CONNTRACK_STATE_DNAT (1 << (IP_CT_NUMBER + 2))
+#define IPT_CONNTRACK_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 3))
+
+/* flags, invflags: */
+#define IPT_CONNTRACK_STATE	0x01
+#define IPT_CONNTRACK_PROTO	0x02
+#define IPT_CONNTRACK_ORIGSRC	0x04
+#define IPT_CONNTRACK_ORIGDST	0x08
+#define IPT_CONNTRACK_REPLSRC	0x10
+#define IPT_CONNTRACK_REPLDST	0x20
+#define IPT_CONNTRACK_STATUS	0x40
+#define IPT_CONNTRACK_EXPIRES	0x80
+
+/* This is exposed to userspace, so remains frozen in time. */
+struct ip_conntrack_old_tuple
+{
+	struct {
+		__u32 ip;
+		union {
+			__u16 all;
+		} u;
+	} src;
+
+	struct {
+		__u32 ip;
+		union {
+			__u16 all;
+		} u;
+
+		/* The protocol. */
+		u16 protonum;
+	} dst;
+};
+
+struct ipt_conntrack_info
+{
+	unsigned int statemask, statusmask;
+
+	struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX];
+	struct in_addr sipmsk[IP_CT_DIR_MAX], dipmsk[IP_CT_DIR_MAX];
+
+	unsigned long expires_min, expires_max;
+
+	/* Flags word */
+	u_int8_t flags;
+	/* Inverse flags */
+	u_int8_t invflags;
+};
+#endif /*_IPT_CONNTRACK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_dscp.h b/include/linux/netfilter_ipv4/ipt_dscp.h
new file mode 100644
index 000000000000..2fa6dfe92894
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_dscp.h
@@ -0,0 +1,23 @@
+/* iptables module for matching the IPv4 DSCP field
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * See RFC2474 for a description of the DSCP field within the IP Header.
+ *
+ * ipt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp
+*/
+#ifndef _IPT_DSCP_H
+#define _IPT_DSCP_H
+
+#define IPT_DSCP_MASK	0xfc	/* 11111100 */
+#define IPT_DSCP_SHIFT	2
+#define IPT_DSCP_MAX	0x3f	/* 00111111 */
+
+/* match info */
+struct ipt_dscp_info {
+	u_int8_t dscp;
+	u_int8_t invert;
+};
+
+#endif /* _IPT_DSCP_H */
diff --git a/include/linux/netfilter_ipv4/ipt_ecn.h b/include/linux/netfilter_ipv4/ipt_ecn.h
new file mode 100644
index 000000000000..1f0d9a4d3378
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ecn.h
@@ -0,0 +1,33 @@
+/* iptables module for matching the ECN header in IPv4 and TCP header
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * ipt_ecn.h,v 1.4 2002/08/05 19:39:00 laforge Exp
+*/
+#ifndef _IPT_ECN_H
+#define _IPT_ECN_H
+#include <linux/netfilter_ipv4/ipt_dscp.h>
+
+#define IPT_ECN_IP_MASK	(~IPT_DSCP_MASK)
+
+#define IPT_ECN_OP_MATCH_IP	0x01
+#define IPT_ECN_OP_MATCH_ECE	0x10
+#define IPT_ECN_OP_MATCH_CWR	0x20
+
+#define IPT_ECN_OP_MATCH_MASK	0xce
+
+/* match info */
+struct ipt_ecn_info {
+	u_int8_t operation;
+	u_int8_t invert;
+	u_int8_t ip_ect;
+	union {
+		struct {
+			u_int8_t ect;
+		} tcp;
+	} proto;
+};
+
+#endif /* _IPT_ECN_H */
diff --git a/include/linux/netfilter_ipv4/ipt_esp.h b/include/linux/netfilter_ipv4/ipt_esp.h
new file mode 100644
index 000000000000..c782a83e53e0
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_esp.h
@@ -0,0 +1,16 @@
+#ifndef _IPT_ESP_H
+#define _IPT_ESP_H
+
+struct ipt_esp
+{
+	u_int32_t spis[2];			/* Security Parameter Index */
+	u_int8_t  invflags;			/* Inverse flags */
+};
+
+
+
+/* Values for "invflags" field in struct ipt_esp. */
+#define IPT_ESP_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IPT_ESP_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IPT_ESP_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_hashlimit.h b/include/linux/netfilter_ipv4/ipt_hashlimit.h
new file mode 100644
index 000000000000..ac2cb64ecd76
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_hashlimit.h
@@ -0,0 +1,40 @@
+#ifndef _IPT_HASHLIMIT_H
+#define _IPT_HASHLIMIT_H
+
+/* timings are in milliseconds. */
+#define IPT_HASHLIMIT_SCALE 10000
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+
+/* details of this structure hidden by the implementation */
+struct ipt_hashlimit_htable;
+
+#define IPT_HASHLIMIT_HASH_DIP	0x0001
+#define IPT_HASHLIMIT_HASH_DPT	0x0002
+#define IPT_HASHLIMIT_HASH_SIP	0x0004
+#define IPT_HASHLIMIT_HASH_SPT	0x0008
+
+struct hashlimit_cfg {
+	u_int32_t mode;	  /* bitmask of IPT_HASHLIMIT_HASH_* */
+	u_int32_t avg;    /* Average secs between packets * scale */
+	u_int32_t burst;  /* Period multiplier for upper limit. */
+
+	/* user specified */
+	u_int32_t size;		/* how many buckets */
+	u_int32_t max;		/* max number of entries */
+	u_int32_t gc_interval;	/* gc interval */
+	u_int32_t expire;	/* when do entries expire? */
+};
+
+struct ipt_hashlimit_info {
+	char name [IFNAMSIZ];		/* name */
+	struct hashlimit_cfg cfg;
+	struct ipt_hashlimit_htable *hinfo;
+
+	/* Used internally by the kernel */
+	union {
+		void *ptr;
+		struct ipt_hashlimit_info *master;
+	} u;
+};
+#endif /*_IPT_HASHLIMIT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_helper.h b/include/linux/netfilter_ipv4/ipt_helper.h
new file mode 100644
index 000000000000..6f12ecb8c93d
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_helper.h
@@ -0,0 +1,8 @@
+#ifndef _IPT_HELPER_H
+#define _IPT_HELPER_H
+
+struct ipt_helper_info {
+	int invert;
+	char name[30];
+};
+#endif /* _IPT_HELPER_H */
diff --git a/include/linux/netfilter_ipv4/ipt_iprange.h b/include/linux/netfilter_ipv4/ipt_iprange.h
new file mode 100644
index 000000000000..3ecb3bd63676
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_iprange.h
@@ -0,0 +1,23 @@
+#ifndef _IPT_IPRANGE_H
+#define _IPT_IPRANGE_H
+
+#define IPRANGE_SRC		0x01	/* Match source IP address */
+#define IPRANGE_DST		0x02	/* Match destination IP address */
+#define IPRANGE_SRC_INV		0x10	/* Negate the condition */
+#define IPRANGE_DST_INV		0x20	/* Negate the condition */
+
+struct ipt_iprange {
+	/* Inclusive: network order. */
+	u_int32_t min_ip, max_ip;
+};
+
+struct ipt_iprange_info
+{
+	struct ipt_iprange src;
+	struct ipt_iprange dst;
+
+	/* Flags from above */
+	u_int8_t flags;
+};
+
+#endif /* _IPT_IPRANGE_H */
diff --git a/include/linux/netfilter_ipv4/ipt_length.h b/include/linux/netfilter_ipv4/ipt_length.h
new file mode 100644
index 000000000000..6e0885229615
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_length.h
@@ -0,0 +1,9 @@
+#ifndef _IPT_LENGTH_H
+#define _IPT_LENGTH_H
+
+struct ipt_length_info {
+    u_int16_t	min, max;
+    u_int8_t	invert;
+};
+
+#endif /*_IPT_LENGTH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_limit.h b/include/linux/netfilter_ipv4/ipt_limit.h
new file mode 100644
index 000000000000..256453409e21
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_limit.h
@@ -0,0 +1,21 @@
+#ifndef _IPT_RATE_H
+#define _IPT_RATE_H
+
+/* timings are in milliseconds. */
+#define IPT_LIMIT_SCALE 10000
+
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+struct ipt_rateinfo {
+	u_int32_t avg;    /* Average secs between packets * scale */
+	u_int32_t burst;  /* Period multiplier for upper limit. */
+
+	/* Used internally by the kernel */
+	unsigned long prev;
+	u_int32_t credit;
+	u_int32_t credit_cap, cost;
+
+	/* Ugly, ugly fucker. */
+	struct ipt_rateinfo *master;
+};
+#endif /*_IPT_RATE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_mac.h b/include/linux/netfilter_ipv4/ipt_mac.h
new file mode 100644
index 000000000000..f8d5b8e7ccdb
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_mac.h
@@ -0,0 +1,8 @@
+#ifndef _IPT_MAC_H
+#define _IPT_MAC_H
+
+struct ipt_mac_info {
+    unsigned char srcaddr[ETH_ALEN];
+    int invert;
+};
+#endif /*_IPT_MAC_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_mark.h b/include/linux/netfilter_ipv4/ipt_mark.h
new file mode 100644
index 000000000000..f3952b563d4c
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_mark.h
@@ -0,0 +1,9 @@
+#ifndef _IPT_MARK_H
+#define _IPT_MARK_H
+
+struct ipt_mark_info {
+    unsigned long mark, mask;
+    u_int8_t invert;
+};
+
+#endif /*_IPT_MARK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_multiport.h b/include/linux/netfilter_ipv4/ipt_multiport.h
new file mode 100644
index 000000000000..e6b6fff811df
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_multiport.h
@@ -0,0 +1,30 @@
+#ifndef _IPT_MULTIPORT_H
+#define _IPT_MULTIPORT_H
+#include <linux/netfilter_ipv4/ip_tables.h>
+
+enum ipt_multiport_flags
+{
+	IPT_MULTIPORT_SOURCE,
+	IPT_MULTIPORT_DESTINATION,
+	IPT_MULTIPORT_EITHER
+};
+
+#define IPT_MULTI_PORTS	15
+
+/* Must fit inside union ipt_matchinfo: 16 bytes */
+struct ipt_multiport
+{
+	u_int8_t flags;				/* Type of comparison */
+	u_int8_t count;				/* Number of ports */
+	u_int16_t ports[IPT_MULTI_PORTS];	/* Ports */
+};
+
+struct ipt_multiport_v1
+{
+	u_int8_t flags;				/* Type of comparison */
+	u_int8_t count;				/* Number of ports */
+	u_int16_t ports[IPT_MULTI_PORTS];	/* Ports */
+	u_int8_t pflags[IPT_MULTI_PORTS];	/* Port flags */
+	u_int8_t invert;			/* Invert flag */
+};
+#endif /*_IPT_MULTIPORT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_owner.h b/include/linux/netfilter_ipv4/ipt_owner.h
new file mode 100644
index 000000000000..92f4bdac54ef
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_owner.h
@@ -0,0 +1,20 @@
+#ifndef _IPT_OWNER_H
+#define _IPT_OWNER_H
+
+/* match and invert flags */
+#define IPT_OWNER_UID	0x01
+#define IPT_OWNER_GID	0x02
+#define IPT_OWNER_PID	0x04
+#define IPT_OWNER_SID	0x08
+#define IPT_OWNER_COMM	0x10
+
+struct ipt_owner_info {
+    uid_t uid;
+    gid_t gid;
+    pid_t pid;
+    pid_t sid;
+    char comm[16];
+    u_int8_t match, invert;	/* flags */
+};
+
+#endif /*_IPT_OWNER_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_physdev.h b/include/linux/netfilter_ipv4/ipt_physdev.h
new file mode 100644
index 000000000000..7538c8655ec0
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_physdev.h
@@ -0,0 +1,24 @@
+#ifndef _IPT_PHYSDEV_H
+#define _IPT_PHYSDEV_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#endif
+
+#define IPT_PHYSDEV_OP_IN		0x01
+#define IPT_PHYSDEV_OP_OUT		0x02
+#define IPT_PHYSDEV_OP_BRIDGED		0x04
+#define IPT_PHYSDEV_OP_ISIN		0x08
+#define IPT_PHYSDEV_OP_ISOUT		0x10
+#define IPT_PHYSDEV_OP_MASK		(0x20 - 1)
+
+struct ipt_physdev_info {
+	char physindev[IFNAMSIZ];
+	char in_mask[IFNAMSIZ];
+	char physoutdev[IFNAMSIZ];
+	char out_mask[IFNAMSIZ];
+	u_int8_t invert;
+	u_int8_t bitmask;
+};
+
+#endif /*_IPT_PHYSDEV_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_pkttype.h b/include/linux/netfilter_ipv4/ipt_pkttype.h
new file mode 100644
index 000000000000..d53a65848683
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_pkttype.h
@@ -0,0 +1,8 @@
+#ifndef _IPT_PKTTYPE_H
+#define _IPT_PKTTYPE_H
+
+struct ipt_pkttype_info {
+	int	pkttype;
+	int	invert;
+};
+#endif /*_IPT_PKTTYPE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_realm.h b/include/linux/netfilter_ipv4/ipt_realm.h
new file mode 100644
index 000000000000..a4d6698723ac
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_realm.h
@@ -0,0 +1,10 @@
+#ifndef _IPT_REALM_H
+#define _IPT_REALM_H
+
+struct ipt_realm_info {
+	u_int32_t id;
+	u_int32_t mask;
+	u_int8_t invert;
+};
+
+#endif /* _IPT_REALM_H */
diff --git a/include/linux/netfilter_ipv4/ipt_recent.h b/include/linux/netfilter_ipv4/ipt_recent.h
new file mode 100644
index 000000000000..6508a4592651
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_recent.h
@@ -0,0 +1,27 @@
+#ifndef _IPT_RECENT_H
+#define _IPT_RECENT_H
+
+#define RECENT_NAME	"ipt_recent"
+#define RECENT_VER	"v0.3.1"
+
+#define IPT_RECENT_CHECK  1
+#define IPT_RECENT_SET    2
+#define IPT_RECENT_UPDATE 4
+#define IPT_RECENT_REMOVE 8
+#define IPT_RECENT_TTL   16
+
+#define IPT_RECENT_SOURCE 0
+#define IPT_RECENT_DEST   1
+
+#define IPT_RECENT_NAME_LEN 200
+
+struct ipt_recent_info {
+	u_int32_t   seconds;
+	u_int32_t   hit_count;
+	u_int8_t    check_set;
+	u_int8_t    invert;
+	char        name[IPT_RECENT_NAME_LEN];
+	u_int8_t    side;
+};
+
+#endif /*_IPT_RECENT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_sctp.h b/include/linux/netfilter_ipv4/ipt_sctp.h
new file mode 100644
index 000000000000..e93a9ec99fc2
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_sctp.h
@@ -0,0 +1,107 @@
+#ifndef _IPT_SCTP_H_
+#define _IPT_SCTP_H_
+
+#define IPT_SCTP_SRC_PORTS	        0x01
+#define IPT_SCTP_DEST_PORTS	        0x02
+#define IPT_SCTP_CHUNK_TYPES		0x04
+
+#define IPT_SCTP_VALID_FLAGS		0x07
+
+#define ELEMCOUNT(x) (sizeof(x)/sizeof(x[0]))
+
+
+struct ipt_sctp_flag_info {
+	u_int8_t chunktype;
+	u_int8_t flag;
+	u_int8_t flag_mask;
+};
+
+#define IPT_NUM_SCTP_FLAGS	4
+
+struct ipt_sctp_info {
+	u_int16_t dpts[2];  /* Min, Max */
+	u_int16_t spts[2];  /* Min, Max */
+
+	u_int32_t chunkmap[256 / sizeof (u_int32_t)];  /* Bit mask of chunks to be matched according to RFC 2960 */
+
+#define SCTP_CHUNK_MATCH_ANY   0x01  /* Match if any of the chunk types are present */
+#define SCTP_CHUNK_MATCH_ALL   0x02  /* Match if all of the chunk types are present */
+#define SCTP_CHUNK_MATCH_ONLY  0x04  /* Match if these are the only chunk types present */
+
+	u_int32_t chunk_match_type;
+	struct ipt_sctp_flag_info flag_info[IPT_NUM_SCTP_FLAGS];
+	int flag_count;
+
+	u_int32_t flags;
+	u_int32_t invflags;
+};
+
+#define bytes(type) (sizeof(type) * 8)
+
+#define SCTP_CHUNKMAP_SET(chunkmap, type) 		\
+	do { 						\
+		chunkmap[type / bytes(u_int32_t)] |= 	\
+			1 << (type % bytes(u_int32_t));	\
+	} while (0)
+
+#define SCTP_CHUNKMAP_CLEAR(chunkmap, type)		 	\
+	do {							\
+		chunkmap[type / bytes(u_int32_t)] &= 		\
+			~(1 << (type % bytes(u_int32_t)));	\
+	} while (0)
+
+#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) 			\
+({								\
+	(chunkmap[type / bytes (u_int32_t)] & 			\
+		(1 << (type % bytes (u_int32_t)))) ? 1: 0;	\
+})
+
+#define SCTP_CHUNKMAP_RESET(chunkmap) 				\
+	do {							\
+		int i; 						\
+		for (i = 0; i < ELEMCOUNT(chunkmap); i++)	\
+			chunkmap[i] = 0;			\
+	} while (0)
+
+#define SCTP_CHUNKMAP_SET_ALL(chunkmap) 			\
+	do {							\
+		int i; 						\
+		for (i = 0; i < ELEMCOUNT(chunkmap); i++) 	\
+			chunkmap[i] = ~0;			\
+	} while (0)
+
+#define SCTP_CHUNKMAP_COPY(destmap, srcmap) 			\
+	do {							\
+		int i; 						\
+		for (i = 0; i < ELEMCOUNT(chunkmap); i++) 	\
+			destmap[i] = srcmap[i];			\
+	} while (0)
+
+#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) 		\
+({							\
+	int i; 						\
+	int flag = 1;					\
+	for (i = 0; i < ELEMCOUNT(chunkmap); i++) {	\
+		if (chunkmap[i]) {			\
+			flag = 0;			\
+			break;				\
+		}					\
+	}						\
+        flag;						\
+})
+
+#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) 		\
+({							\
+	int i; 						\
+	int flag = 1;					\
+	for (i = 0; i < ELEMCOUNT(chunkmap); i++) {	\
+		if (chunkmap[i] != ~0) {		\
+			flag = 0;			\
+				break;			\
+		}					\
+	}						\
+        flag;						\
+})
+
+#endif /* _IPT_SCTP_H_ */
+
diff --git a/include/linux/netfilter_ipv4/ipt_state.h b/include/linux/netfilter_ipv4/ipt_state.h
new file mode 100644
index 000000000000..5df37868933d
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_state.h
@@ -0,0 +1,13 @@
+#ifndef _IPT_STATE_H
+#define _IPT_STATE_H
+
+#define IPT_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
+#define IPT_STATE_INVALID (1 << 0)
+
+#define IPT_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 1))
+
+struct ipt_state_info
+{
+	unsigned int statemask;
+};
+#endif /*_IPT_STATE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_tcpmss.h b/include/linux/netfilter_ipv4/ipt_tcpmss.h
new file mode 100644
index 000000000000..e2b14397f701
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_tcpmss.h
@@ -0,0 +1,9 @@
+#ifndef _IPT_TCPMSS_MATCH_H
+#define _IPT_TCPMSS_MATCH_H
+
+struct ipt_tcpmss_match_info {
+    u_int16_t mss_min, mss_max;
+    u_int8_t invert;
+};
+
+#endif /*_IPT_TCPMSS_MATCH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_tos.h b/include/linux/netfilter_ipv4/ipt_tos.h
new file mode 100644
index 000000000000..a21f5df23c50
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_tos.h
@@ -0,0 +1,13 @@
+#ifndef _IPT_TOS_H
+#define _IPT_TOS_H
+
+struct ipt_tos_info {
+    u_int8_t tos;
+    u_int8_t invert;
+};
+
+#ifndef IPTOS_NORMALSVC
+#define IPTOS_NORMALSVC 0
+#endif
+
+#endif /*_IPT_TOS_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_ttl.h b/include/linux/netfilter_ipv4/ipt_ttl.h
new file mode 100644
index 000000000000..ee24fd86a3aa
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ttl.h
@@ -0,0 +1,21 @@
+/* IP tables module for matching the value of the TTL
+ * (C) 2000 by Harald Welte <laforge@gnumonks.org> */
+
+#ifndef _IPT_TTL_H
+#define _IPT_TTL_H
+
+enum {
+	IPT_TTL_EQ = 0,		/* equals */
+	IPT_TTL_NE,		/* not equals */
+	IPT_TTL_LT,		/* less than */
+	IPT_TTL_GT,		/* greater than */
+};
+
+
+struct ipt_ttl_info {
+	u_int8_t	mode;
+	u_int8_t	ttl;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv4/listhelp.h b/include/linux/netfilter_ipv4/listhelp.h
new file mode 100644
index 000000000000..f2ae7c5e57bb
--- /dev/null
+++ b/include/linux/netfilter_ipv4/listhelp.h
@@ -0,0 +1,125 @@
+#ifndef _LISTHELP_H
+#define _LISTHELP_H
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/lockhelp.h>
+
+/* Header to do more comprehensive job than linux/list.h; assume list
+   is first entry in structure. */
+
+/* Return pointer to first true entry, if any, or NULL.  A macro
+   required to allow inlining of cmpfn. */
+#define LIST_FIND(head, cmpfn, type, args...)		\
+({							\
+	const struct list_head *__i, *__j = NULL;	\
+							\
+	ASSERT_READ_LOCK(head);				\
+	list_for_each(__i, (head))			\
+		if (cmpfn((const type)__i , ## args)) {	\
+			__j = __i;			\
+			break;				\
+		}					\
+	(type)__j;					\
+})
+
+#define LIST_FIND_W(head, cmpfn, type, args...)		\
+({							\
+	const struct list_head *__i, *__j = NULL;	\
+							\
+	ASSERT_WRITE_LOCK(head);			\
+	list_for_each(__i, (head))			\
+		if (cmpfn((type)__i , ## args)) {	\
+			__j = __i;			\
+			break;				\
+		}					\
+	(type)__j;					\
+})
+
+/* Just like LIST_FIND but we search backwards */
+#define LIST_FIND_B(head, cmpfn, type, args...)		\
+({							\
+	const struct list_head *__i, *__j = NULL;	\
+							\
+	ASSERT_READ_LOCK(head);				\
+	list_for_each_prev(__i, (head))			\
+		if (cmpfn((const type)__i , ## args)) {	\
+			__j = __i;			\
+			break;				\
+		}					\
+	(type)__j;					\
+})
+
+static inline int
+__list_cmp_same(const void *p1, const void *p2) { return p1 == p2; }
+
+/* Is this entry in the list? */
+static inline int
+list_inlist(struct list_head *head, const void *entry)
+{
+	return LIST_FIND(head, __list_cmp_same, void *, entry) != NULL;
+}
+
+/* Delete from list. */
+#ifdef CONFIG_NETFILTER_DEBUG
+#define LIST_DELETE(head, oldentry)					\
+do {									\
+	ASSERT_WRITE_LOCK(head);					\
+	if (!list_inlist(head, oldentry))				\
+		printk("LIST_DELETE: %s:%u `%s'(%p) not in %s.\n",	\
+		       __FILE__, __LINE__, #oldentry, oldentry, #head);	\
+        else list_del((struct list_head *)oldentry);			\
+} while(0)
+#else
+#define LIST_DELETE(head, oldentry) list_del((struct list_head *)oldentry)
+#endif
+
+/* Append. */
+static inline void
+list_append(struct list_head *head, void *new)
+{
+	ASSERT_WRITE_LOCK(head);
+	list_add((new), (head)->prev);
+}
+
+/* Prepend. */
+static inline void
+list_prepend(struct list_head *head, void *new)
+{
+	ASSERT_WRITE_LOCK(head);
+	list_add(new, head);
+}
+
+/* Insert according to ordering function; insert before first true. */
+#define LIST_INSERT(head, new, cmpfn)				\
+do {								\
+	struct list_head *__i;					\
+	ASSERT_WRITE_LOCK(head);				\
+	list_for_each(__i, (head))				\
+		if ((new), (typeof (new))__i)			\
+			break;					\
+	list_add((struct list_head *)(new), __i->prev);		\
+} while(0)
+
+/* If the field after the list_head is a nul-terminated string, you
+   can use these functions. */
+static inline int __list_cmp_name(const void *i, const char *name)
+{
+	return strcmp(name, i+sizeof(struct list_head)) == 0;
+}
+
+/* Returns false if same name already in list, otherwise does insert. */
+static inline int
+list_named_insert(struct list_head *head, void *new)
+{
+	if (LIST_FIND(head, __list_cmp_name, void *,
+		      new + sizeof(struct list_head)))
+		return 0;
+	list_prepend(head, new);
+	return 1;
+}
+
+/* Find this named element in the list. */
+#define list_named_find(head, name)			\
+LIST_FIND(head, __list_cmp_name, void *, name)
+
+#endif /*_LISTHELP_H*/
diff --git a/include/linux/netfilter_ipv4/lockhelp.h b/include/linux/netfilter_ipv4/lockhelp.h
new file mode 100644
index 000000000000..a3288633ab46
--- /dev/null
+++ b/include/linux/netfilter_ipv4/lockhelp.h
@@ -0,0 +1,129 @@
+#ifndef _LOCKHELP_H
+#define _LOCKHELP_H
+#include <linux/config.h>
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+/* Header to do help in lock debugging. */
+
+#ifdef CONFIG_NETFILTER_DEBUG
+struct spinlock_debug
+{
+	spinlock_t l;
+	atomic_t locked_by;
+};
+
+struct rwlock_debug
+{
+	rwlock_t l;
+	long read_locked_map;
+	long write_locked_map;
+};
+
+#define DECLARE_LOCK(l) 						\
+struct spinlock_debug l = { SPIN_LOCK_UNLOCKED, ATOMIC_INIT(-1) }
+#define DECLARE_LOCK_EXTERN(l) 			\
+extern struct spinlock_debug l
+#define DECLARE_RWLOCK(l)				\
+struct rwlock_debug l = { RW_LOCK_UNLOCKED, 0, 0 }
+#define DECLARE_RWLOCK_EXTERN(l)		\
+extern struct rwlock_debug l
+
+#define MUST_BE_LOCKED(l)						\
+do { if (atomic_read(&(l)->locked_by) != smp_processor_id())		\
+	printk("ASSERT %s:%u %s unlocked\n", __FILE__, __LINE__, #l);	\
+} while(0)
+
+#define MUST_BE_UNLOCKED(l)						\
+do { if (atomic_read(&(l)->locked_by) == smp_processor_id())		\
+	printk("ASSERT %s:%u %s locked\n", __FILE__, __LINE__, #l);	\
+} while(0)
+
+/* Write locked OK as well. */
+#define MUST_BE_READ_LOCKED(l)						    \
+do { if (!((l)->read_locked_map & (1UL << smp_processor_id()))		    \
+	 && !((l)->write_locked_map & (1UL << smp_processor_id())))	    \
+	printk("ASSERT %s:%u %s not readlocked\n", __FILE__, __LINE__, #l); \
+} while(0)
+
+#define MUST_BE_WRITE_LOCKED(l)						     \
+do { if (!((l)->write_locked_map & (1UL << smp_processor_id())))	     \
+	printk("ASSERT %s:%u %s not writelocked\n", __FILE__, __LINE__, #l); \
+} while(0)
+
+#define MUST_BE_READ_WRITE_UNLOCKED(l)					  \
+do { if ((l)->read_locked_map & (1UL << smp_processor_id()))		  \
+	printk("ASSERT %s:%u %s readlocked\n", __FILE__, __LINE__, #l);	  \
+ else if ((l)->write_locked_map & (1UL << smp_processor_id()))		  \
+	 printk("ASSERT %s:%u %s writelocked\n", __FILE__, __LINE__, #l); \
+} while(0)
+
+#define LOCK_BH(lk)						\
+do {								\
+	MUST_BE_UNLOCKED(lk);					\
+	spin_lock_bh(&(lk)->l);					\
+	atomic_set(&(lk)->locked_by, smp_processor_id());	\
+} while(0)
+
+#define UNLOCK_BH(lk)				\
+do {						\
+	MUST_BE_LOCKED(lk);			\
+	atomic_set(&(lk)->locked_by, -1);	\
+	spin_unlock_bh(&(lk)->l);		\
+} while(0)
+
+#define READ_LOCK(lk) 						\
+do {								\
+	MUST_BE_READ_WRITE_UNLOCKED(lk);			\
+	read_lock_bh(&(lk)->l);					\
+	set_bit(smp_processor_id(), &(lk)->read_locked_map);	\
+} while(0)
+
+#define WRITE_LOCK(lk)							  \
+do {									  \
+	MUST_BE_READ_WRITE_UNLOCKED(lk);				  \
+	write_lock_bh(&(lk)->l);					  \
+	set_bit(smp_processor_id(), &(lk)->write_locked_map);		  \
+} while(0)
+
+#define READ_UNLOCK(lk)							\
+do {									\
+	if (!((lk)->read_locked_map & (1UL << smp_processor_id())))	\
+		printk("ASSERT: %s:%u %s not readlocked\n", 		\
+		       __FILE__, __LINE__, #lk);			\
+	clear_bit(smp_processor_id(), &(lk)->read_locked_map);		\
+	read_unlock_bh(&(lk)->l);					\
+} while(0)
+
+#define WRITE_UNLOCK(lk)					\
+do {								\
+	MUST_BE_WRITE_LOCKED(lk);				\
+	clear_bit(smp_processor_id(), &(lk)->write_locked_map);	\
+	write_unlock_bh(&(lk)->l);				\
+} while(0)
+
+#else
+#define DECLARE_LOCK(l) spinlock_t l = SPIN_LOCK_UNLOCKED
+#define DECLARE_LOCK_EXTERN(l) extern spinlock_t l
+#define DECLARE_RWLOCK(l) rwlock_t l = RW_LOCK_UNLOCKED
+#define DECLARE_RWLOCK_EXTERN(l) extern rwlock_t l
+
+#define MUST_BE_LOCKED(l)
+#define MUST_BE_UNLOCKED(l)
+#define MUST_BE_READ_LOCKED(l)
+#define MUST_BE_WRITE_LOCKED(l)
+#define MUST_BE_READ_WRITE_UNLOCKED(l)
+
+#define LOCK_BH(l) spin_lock_bh(l)
+#define UNLOCK_BH(l) spin_unlock_bh(l)
+
+#define READ_LOCK(l) read_lock_bh(l)
+#define WRITE_LOCK(l) write_lock_bh(l)
+#define READ_UNLOCK(l) read_unlock_bh(l)
+#define WRITE_UNLOCK(l) write_unlock_bh(l)
+#endif /*CONFIG_NETFILTER_DEBUG*/
+
+#endif /* _LOCKHELP_H */
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
new file mode 100644
index 000000000000..bee7a5ec7c66
--- /dev/null
+++ b/include/linux/netfilter_ipv6.h
@@ -0,0 +1,71 @@
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
+
+/* IPv6-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ *   this header was blatantly ripped from netfilter_ipv4.h 
+ *   it's amazing what adding a bunch of 6s can do =8^)
+ */
+
+#include <linux/netfilter.h>
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC              0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST              0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN            0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT           0x0008
+/* TOS. */
+#define NFC_IP6_TOS              0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO            0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS          0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG             0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS         0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT           0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT           0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN    0x2000
+
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING	4
+#define NF_IP6_NUMHOOKS		5
+
+
+enum nf_ip6_hook_priorities {
+	NF_IP6_PRI_FIRST = INT_MIN,
+	NF_IP6_PRI_SELINUX_FIRST = -225,
+	NF_IP6_PRI_CONNTRACK = -200,
+	NF_IP6_PRI_BRIDGE_SABOTAGE_FORWARD = -175,
+	NF_IP6_PRI_MANGLE = -150,
+	NF_IP6_PRI_NAT_DST = -100,
+	NF_IP6_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50,
+	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_NAT_SRC = 100,
+	NF_IP6_PRI_SELINUX_LAST = 225,
+	NF_IP6_PRI_LAST = INT_MAX,
+};
+
+#endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6/ip6_logging.h b/include/linux/netfilter_ipv6/ip6_logging.h
new file mode 100644
index 000000000000..a0b2ee3043aa
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6_logging.h
@@ -0,0 +1,20 @@
+/* IPv6 macros for the nternal logging interface. */
+#ifndef __IP6_LOGGING_H
+#define __IP6_LOGGING_H
+
+#ifdef __KERNEL__
+#include <linux/socket.h>
+#include <linux/netfilter_logging.h>
+
+#define nf_log_ip6_packet(pskb,hooknum,in,out,fmt,args...) \
+	nf_log_packet(AF_INET6,pskb,hooknum,in,out,fmt,##args)
+
+#define nf_log_ip6(pfh,len,fmt,args...) \
+	nf_log(AF_INET6,pfh,len,fmt,##args)
+
+#define nf_ip6_log_register(logging) nf_log_register(AF_INET6,logging)
+#define nf_ip6_log_unregister(logging) nf_log_unregister(AF_INET6,logging)
+	
+#endif /*__KERNEL__*/
+
+#endif /*__IP6_LOGGING_H*/
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
new file mode 100644
index 000000000000..f1ce3b009853
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -0,0 +1,461 @@
+/*
+ * 25-Jul-1998 Major changes to allow for ip chain table
+ *
+ * 3-Jan-2000 Named tables to allow packet selection for different uses.
+ */
+
+/*
+ * 	Format of an IP6 firewall descriptor
+ *
+ * 	src, dst, src_mask, dst_mask are always stored in network byte order.
+ * 	flags are stored in host byte order (of course).
+ * 	Port numbers are stored in HOST byte order.
+ */
+
+#ifndef _IP6_TABLES_H
+#define _IP6_TABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <linux/ipv6.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/netfilter_ipv6.h>
+
+#define IP6T_FUNCTION_MAXNAMELEN 30
+#define IP6T_TABLE_MAXNAMELEN 32
+
+/* Yes, Virginia, you have to zero the padding. */
+struct ip6t_ip6 {
+	/* Source and destination IP6 addr */
+	struct in6_addr src, dst;		
+	/* Mask for src and dest IP6 addr */
+	struct in6_addr smsk, dmsk;
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* ARGH, HopByHop uses 0, so can't do 0 = ANY,
+	   instead IP6T_F_NOPROTO must be set */
+	u_int16_t proto;
+	/* TOS to match iff flags & IP6T_F_TOS */
+	u_int8_t tos;
+
+	/* Flags word */
+	u_int8_t flags;
+	/* Inverse flags */
+	u_int8_t invflags;
+};
+
+/* FIXME: If alignment in kernel different from userspace? --RR */
+struct ip6t_entry_match
+{
+	union {
+		struct {
+			u_int16_t match_size;
+
+			/* Used by userspace */
+			char name[IP6T_FUNCTION_MAXNAMELEN];
+		} user;
+		struct {
+			u_int16_t match_size;
+
+			/* Used inside the kernel */
+			struct ip6t_match *match;
+		} kernel;
+
+		/* Total length */
+		u_int16_t match_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct ip6t_entry_target
+{
+	union {
+		struct {
+			u_int16_t target_size;
+
+			/* Used by userspace */
+			char name[IP6T_FUNCTION_MAXNAMELEN];
+		} user;
+		struct {
+			u_int16_t target_size;
+
+			/* Used inside the kernel */
+			struct ip6t_target *target;
+		} kernel;
+
+		/* Total length */
+		u_int16_t target_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct ip6t_standard_target
+{
+	struct ip6t_entry_target target;
+	int verdict;
+};
+
+struct ip6t_counters
+{
+	u_int64_t pcnt, bcnt;			/* Packet and byte counters */
+};
+
+/* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */
+#define IP6T_F_PROTO		0x01	/* Set if rule cares about upper 
+					   protocols */
+#define IP6T_F_TOS		0x02	/* Match the TOS. */
+#define IP6T_F_MASK		0x03	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct ip6t_ip6. */
+#define IP6T_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+#define IP6T_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
+#define IP6T_INV_TOS		0x04	/* Invert the sense of TOS. */
+#define IP6T_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
+#define IP6T_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
+#define IP6T_INV_FRAG		0x20	/* Invert the sense of FRAG. */
+#define IP6T_INV_PROTO		0x40	/* Invert the sense of PROTO. */
+#define IP6T_INV_MASK		0x7F	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general IP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct ip6t_entry
+{
+	struct ip6t_ip6 ipv6;
+
+	/* Mark with fields that we care about. */
+	unsigned int nfcache;
+
+	/* Size of ipt_entry + matches */
+	u_int16_t target_offset;
+	/* Size of ipt_entry + matches + target */
+	u_int16_t next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct ip6t_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use
+ * a raw socket for this. Instead we check rights in the calls. */
+#define IP6T_BASE_CTL			64	/* base for firewall socket options */
+
+#define IP6T_SO_SET_REPLACE		(IP6T_BASE_CTL)
+#define IP6T_SO_SET_ADD_COUNTERS	(IP6T_BASE_CTL + 1)
+#define IP6T_SO_SET_MAX			IP6T_SO_SET_ADD_COUNTERS
+
+#define IP6T_SO_GET_INFO		(IP6T_BASE_CTL)
+#define IP6T_SO_GET_ENTRIES		(IP6T_BASE_CTL + 1)
+#define IP6T_SO_GET_MAX			IP6T_SO_GET_ENTRIES
+
+/* CONTINUE verdict for targets */
+#define IP6T_CONTINUE 0xFFFFFFFF
+
+/* For standard target */
+#define IP6T_RETURN (-NF_REPEAT - 1)
+
+/* TCP matching stuff */
+struct ip6t_tcp
+{
+	u_int16_t spts[2];			/* Source port range. */
+	u_int16_t dpts[2];			/* Destination port range. */
+	u_int8_t option;			/* TCP Option iff non-zero*/
+	u_int8_t flg_mask;			/* TCP flags mask byte */
+	u_int8_t flg_cmp;			/* TCP flags compare byte */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "inv" field in struct ipt_tcp. */
+#define IP6T_TCP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define IP6T_TCP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define IP6T_TCP_INV_FLAGS	0x04	/* Invert the sense of TCP flags. */
+#define IP6T_TCP_INV_OPTION	0x08	/* Invert the sense of option test. */
+#define IP6T_TCP_INV_MASK	0x0F	/* All possible flags. */
+
+/* UDP matching stuff */
+struct ip6t_udp
+{
+	u_int16_t spts[2];			/* Source port range. */
+	u_int16_t dpts[2];			/* Destination port range. */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "invflags" field in struct ipt_udp. */
+#define IP6T_UDP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define IP6T_UDP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define IP6T_UDP_INV_MASK	0x03	/* All possible flags. */
+
+/* ICMP matching stuff */
+struct ip6t_icmp
+{
+	u_int8_t type;				/* type to match */
+	u_int8_t code[2];			/* range of code */
+	u_int8_t invflags;			/* Inverse flags */
+};
+
+/* Values for "inv" field for struct ipt_icmp. */
+#define IP6T_ICMP_INV	0x01	/* Invert the sense of type/code test */
+
+/* The argument to IP6T_SO_GET_INFO */
+struct ip6t_getinfo
+{
+	/* Which table: caller fills this in. */
+	char name[IP6T_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_IP6_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_IP6_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to IP6T_SO_SET_REPLACE. */
+struct ip6t_replace
+{
+	/* Which table. */
+	char name[IP6T_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_IP6_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_IP6_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct ip6t_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct ip6t_entry entries[0];
+};
+
+/* The argument to IP6T_SO_ADD_COUNTERS. */
+struct ip6t_counters_info
+{
+	/* Which table. */
+	char name[IP6T_TABLE_MAXNAMELEN];
+
+	unsigned int num_counters;
+
+	/* The counters (actually `number' of these). */
+	struct ip6t_counters counters[0];
+};
+
+/* The argument to IP6T_SO_GET_ENTRIES. */
+struct ip6t_get_entries
+{
+	/* Which table: user fills this in. */
+	char name[IP6T_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct ip6t_entry entrytable[0];
+};
+
+/* Standard return verdict, or do jump. */
+#define IP6T_STANDARD_TARGET ""
+/* Error verdict. */
+#define IP6T_ERROR_TARGET "ERROR"
+
+/* Helper functions */
+static __inline__ struct ip6t_entry_target *
+ip6t_get_target(struct ip6t_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/* fn returns 0 to continue iteration */
+#define IP6T_MATCH_ITERATE(e, fn, args...)	\
+({						\
+	unsigned int __i;			\
+	int __ret = 0;				\
+	struct ip6t_entry_match *__m;		\
+						\
+	for (__i = sizeof(struct ip6t_entry);	\
+	     __i < (e)->target_offset;		\
+	     __i += __m->u.match_size) {	\
+		__m = (void *)(e) + __i;	\
+						\
+		__ret = fn(__m , ## args);	\
+		if (__ret != 0)			\
+			break;			\
+	}					\
+	__ret;					\
+})
+
+/* fn returns 0 to continue iteration */
+#define IP6T_ENTRY_ITERATE(entries, size, fn, args...)		\
+({								\
+	unsigned int __i;					\
+	int __ret = 0;						\
+	struct ip6t_entry *__e;					\
+								\
+	for (__i = 0; __i < (size); __i += __e->next_offset) {	\
+		__e = (void *)(entries) + __i;			\
+								\
+		__ret = fn(__e , ## args);			\
+		if (__ret != 0)					\
+			break;					\
+	}							\
+	__ret;							\
+})
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+extern void ip6t_init(void) __init;
+
+struct ip6t_match
+{
+	struct list_head list;
+
+	const char name[IP6T_FUNCTION_MAXNAMELEN];
+
+	/* Return true or false: return FALSE and set *hotdrop = 1 to
+           force immediate packet drop. */
+	/* Arguments changed since 2.6.9, as this must now handle
+	   non-linear skb, using skb_header_pointer and
+	   skb_ip_make_writable. */
+	int (*match)(const struct sk_buff *skb,
+		     const struct net_device *in,
+		     const struct net_device *out,
+		     const void *matchinfo,
+		     int offset,
+		     unsigned int protoff,
+		     int *hotdrop);
+
+	/* Called when user tries to insert an entry of this type. */
+	/* Should return true or false. */
+	int (*checkentry)(const char *tablename,
+			  const struct ip6t_ip6 *ip,
+			  void *matchinfo,
+			  unsigned int matchinfosize,
+			  unsigned int hook_mask);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(void *matchinfo, unsigned int matchinfosize);
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+/* Registration hooks for targets. */
+struct ip6t_target
+{
+	struct list_head list;
+
+	const char name[IP6T_FUNCTION_MAXNAMELEN];
+
+	/* Returns verdict. Argument order changed since 2.6.9, as this
+	   must now handle non-linear skbs, using skb_copy_bits and
+	   skb_ip_make_writable. */
+	unsigned int (*target)(struct sk_buff **pskb,
+			       const struct net_device *in,
+			       const struct net_device *out,
+			       unsigned int hooknum,
+			       const void *targinfo,
+			       void *userdata);
+
+	/* Called when user tries to insert an entry of this type:
+           hook_mask is a bitmask of hooks from which it can be
+           called. */
+	/* Should return true or false. */
+	int (*checkentry)(const char *tablename,
+			  const struct ip6t_entry *e,
+			  void *targinfo,
+			  unsigned int targinfosize,
+			  unsigned int hook_mask);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(void *targinfo, unsigned int targinfosize);
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+extern int ip6t_register_target(struct ip6t_target *target);
+extern void ip6t_unregister_target(struct ip6t_target *target);
+
+extern int ip6t_register_match(struct ip6t_match *match);
+extern void ip6t_unregister_match(struct ip6t_match *match);
+
+/* Furniture shopping... */
+struct ip6t_table
+{
+	struct list_head list;
+
+	/* A unique name... */
+	char name[IP6T_TABLE_MAXNAMELEN];
+
+	/* What hooks you will enter on */
+	unsigned int valid_hooks;
+
+	/* Lock for the curtain */
+	rwlock_t lock;
+
+	/* Man behind the curtain... */
+	struct ip6t_table_info *private;
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+extern int ip6t_register_table(struct ip6t_table *table,
+			       const struct ip6t_replace *repl);
+extern void ip6t_unregister_table(struct ip6t_table *table);
+extern unsigned int ip6t_do_table(struct sk_buff **pskb,
+				  unsigned int hook,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  struct ip6t_table *table,
+				  void *userdata);
+
+/* Check for an extension */
+extern int ip6t_ext_hdr(u8 nexthdr);
+
+#define IP6T_ALIGN(s) (((s) + (__alignof__(struct ip6t_entry)-1)) & ~(__alignof__(struct ip6t_entry)-1))
+
+#endif /*__KERNEL__*/
+#endif /* _IP6_TABLES_H */
diff --git a/include/linux/netfilter_ipv6/ip6t_LOG.h b/include/linux/netfilter_ipv6/ip6t_LOG.h
new file mode 100644
index 000000000000..42996a43bb39
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_LOG.h
@@ -0,0 +1,16 @@
+#ifndef _IP6T_LOG_H
+#define _IP6T_LOG_H
+
+#define IP6T_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define IP6T_LOG_TCPOPT		0x02	/* Log TCP options */
+#define IP6T_LOG_IPOPT		0x04	/* Log IP options */
+#define IP6T_LOG_UID		0x08	/* Log UID owning local socket */
+#define IP6T_LOG_MASK		0x0f
+
+struct ip6t_log_info {
+	unsigned char level;
+	unsigned char logflags;
+	char prefix[30];
+};
+
+#endif /*_IPT_LOG_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_MARK.h b/include/linux/netfilter_ipv6/ip6t_MARK.h
new file mode 100644
index 000000000000..7ade8d8f5246
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_MARK.h
@@ -0,0 +1,8 @@
+#ifndef _IP6T_MARK_H_target
+#define _IP6T_MARK_H_target
+
+struct ip6t_mark_target_info {
+	unsigned long mark;
+};
+
+#endif /*_IPT_MARK_H_target*/
diff --git a/include/linux/netfilter_ipv6/ip6t_ah.h b/include/linux/netfilter_ipv6/ip6t_ah.h
new file mode 100644
index 000000000000..c4f0793a0a98
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_ah.h
@@ -0,0 +1,30 @@
+#ifndef _IP6T_AH_H
+#define _IP6T_AH_H
+
+struct ip6t_ah
+{
+	u_int32_t spis[2];			/* Security Parameter Index */
+	u_int32_t hdrlen;			/* Header Length */
+	u_int8_t  hdrres;			/* Test of the Reserved Filed */
+	u_int8_t  invflags;			/* Inverse flags */
+};
+
+#define IP6T_AH_SPI 0x01
+#define IP6T_AH_LEN 0x02
+#define IP6T_AH_RES 0x04
+
+/* Values for "invflags" field in struct ip6t_ah. */
+#define IP6T_AH_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IP6T_AH_INV_LEN		0x02	/* Invert the sense of length. */
+#define IP6T_AH_INV_MASK	0x03	/* All possible flags. */
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /*_IP6T_AH_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_esp.h b/include/linux/netfilter_ipv6/ip6t_esp.h
new file mode 100644
index 000000000000..01142b98a231
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_esp.h
@@ -0,0 +1,23 @@
+#ifndef _IP6T_ESP_H
+#define _IP6T_ESP_H
+
+struct ip6t_esp
+{
+	u_int32_t spis[2];			/* Security Parameter Index */
+	u_int8_t  invflags;			/* Inverse flags */
+};
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+/* Values for "invflags" field in struct ip6t_esp. */
+#define IP6T_ESP_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IP6T_ESP_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IP6T_ESP_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_frag.h b/include/linux/netfilter_ipv6/ip6t_frag.h
new file mode 100644
index 000000000000..449a57eca7dd
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_frag.h
@@ -0,0 +1,33 @@
+#ifndef _IP6T_FRAG_H
+#define _IP6T_FRAG_H
+
+struct ip6t_frag
+{
+	u_int32_t ids[2];			/* Security Parameter Index */
+	u_int32_t hdrlen;			/* Header Length */
+	u_int8_t  flags;			/*  */
+	u_int8_t  invflags;			/* Inverse flags */
+};
+
+#define IP6T_FRAG_IDS 		0x01
+#define IP6T_FRAG_LEN 		0x02
+#define IP6T_FRAG_RES 		0x04
+#define IP6T_FRAG_FST 		0x08
+#define IP6T_FRAG_MF  		0x10
+#define IP6T_FRAG_NMF  		0x20
+
+/* Values for "invflags" field in struct ip6t_frag. */
+#define IP6T_FRAG_INV_IDS	0x01	/* Invert the sense of ids. */
+#define IP6T_FRAG_INV_LEN	0x02	/* Invert the sense of length. */
+#define IP6T_FRAG_INV_MASK	0x03	/* All possible flags. */
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /*_IP6T_FRAG_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_hl.h b/include/linux/netfilter_ipv6/ip6t_hl.h
new file mode 100644
index 000000000000..5ef91b8319a8
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_hl.h
@@ -0,0 +1,22 @@
+/* ip6tables module for matching the Hop Limit value
+ * Maciej Soltysiak <solt@dns.toxicfilms.tv>
+ * Based on HW's ttl module */
+
+#ifndef _IP6T_HL_H
+#define _IP6T_HL_H
+
+enum {
+	IP6T_HL_EQ = 0,		/* equals */
+	IP6T_HL_NE,		/* not equals */
+	IP6T_HL_LT,		/* less than */
+	IP6T_HL_GT,		/* greater than */
+};
+
+
+struct ip6t_hl_info {
+	u_int8_t	mode;
+	u_int8_t	hop_limit;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv6/ip6t_ipv6header.h b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
new file mode 100644
index 000000000000..51c53fc9c44a
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
@@ -0,0 +1,27 @@
+/* ipv6header match - matches IPv6 packets based
+on whether they contain certain headers */
+
+/* Original idea: Brad Chapman 
+ * Rewritten by: Andras Kis-Szabo <kisza@sch.bme.hu> */
+
+
+#ifndef __IPV6HEADER_H
+#define __IPV6HEADER_H
+
+struct ip6t_ipv6header_info
+{
+	u_int8_t matchflags;
+	u_int8_t invflags;
+	u_int8_t modeflag;
+};
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /* __IPV6HEADER_H */
diff --git a/include/linux/netfilter_ipv6/ip6t_length.h b/include/linux/netfilter_ipv6/ip6t_length.h
new file mode 100644
index 000000000000..7fc09f9f9d63
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_length.h
@@ -0,0 +1,10 @@
+#ifndef _IP6T_LENGTH_H
+#define _IP6T_LENGTH_H
+
+struct ip6t_length_info {
+	u_int16_t  min, max;
+	u_int8_t   invert;
+};
+
+#endif /*_IP6T_LENGTH_H*/
+	
diff --git a/include/linux/netfilter_ipv6/ip6t_limit.h b/include/linux/netfilter_ipv6/ip6t_limit.h
new file mode 100644
index 000000000000..f2866e50f3b4
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_limit.h
@@ -0,0 +1,21 @@
+#ifndef _IP6T_RATE_H
+#define _IP6T_RATE_H
+
+/* timings are in milliseconds. */
+#define IP6T_LIMIT_SCALE 10000
+
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+struct ip6t_rateinfo {
+	u_int32_t avg;    /* Average secs between packets * scale */
+	u_int32_t burst;  /* Period multiplier for upper limit. */
+
+	/* Used internally by the kernel */
+	unsigned long prev;
+	u_int32_t credit;
+	u_int32_t credit_cap, cost;
+
+	/* Ugly, ugly fucker. */
+	struct ip6t_rateinfo *master;
+};
+#endif /*_IPT_RATE_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_mac.h b/include/linux/netfilter_ipv6/ip6t_mac.h
new file mode 100644
index 000000000000..87c088c21848
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_mac.h
@@ -0,0 +1,8 @@
+#ifndef _IP6T_MAC_H
+#define _IP6T_MAC_H
+
+struct ip6t_mac_info {
+    unsigned char srcaddr[ETH_ALEN];
+    int invert;
+};
+#endif /*_IPT_MAC_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_mark.h b/include/linux/netfilter_ipv6/ip6t_mark.h
new file mode 100644
index 000000000000..a734441e1c19
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_mark.h
@@ -0,0 +1,9 @@
+#ifndef _IP6T_MARK_H
+#define _IP6T_MARK_H
+
+struct ip6t_mark_info {
+    unsigned long mark, mask;
+    u_int8_t invert;
+};
+
+#endif /*_IPT_MARK_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_multiport.h b/include/linux/netfilter_ipv6/ip6t_multiport.h
new file mode 100644
index 000000000000..efe4954a8681
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_multiport.h
@@ -0,0 +1,21 @@
+#ifndef _IP6T_MULTIPORT_H
+#define _IP6T_MULTIPORT_H
+#include <linux/netfilter_ipv6/ip6_tables.h>
+
+enum ip6t_multiport_flags
+{
+	IP6T_MULTIPORT_SOURCE,
+	IP6T_MULTIPORT_DESTINATION,
+	IP6T_MULTIPORT_EITHER
+};
+
+#define IP6T_MULTI_PORTS	15
+
+/* Must fit inside union ip6t_matchinfo: 16 bytes */
+struct ip6t_multiport
+{
+	u_int8_t flags;				/* Type of comparison */
+	u_int8_t count;				/* Number of ports */
+	u_int16_t ports[IP6T_MULTI_PORTS];	/* Ports */
+};
+#endif /*_IPT_MULTIPORT_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_opts.h b/include/linux/netfilter_ipv6/ip6t_opts.h
new file mode 100644
index 000000000000..e259b6275bd2
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_opts.h
@@ -0,0 +1,32 @@
+#ifndef _IP6T_OPTS_H
+#define _IP6T_OPTS_H
+
+#define IP6T_OPTS_OPTSNR 16
+
+struct ip6t_opts
+{
+	u_int32_t hdrlen;			/* Header Length */
+	u_int8_t flags;				/*  */
+	u_int8_t invflags;			/* Inverse flags */
+	u_int16_t opts[IP6T_OPTS_OPTSNR];	/* opts */
+	u_int8_t optsnr;			/* Nr of OPts */
+};
+
+#define IP6T_OPTS_LEN 		0x01
+#define IP6T_OPTS_OPTS 		0x02
+#define IP6T_OPTS_NSTRICT	0x04
+
+/* Values for "invflags" field in struct ip6t_rt. */
+#define IP6T_OPTS_INV_LEN	0x01	/* Invert the sense of length. */
+#define IP6T_OPTS_INV_MASK	0x01	/* All possible flags. */
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /*_IP6T_OPTS_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_owner.h b/include/linux/netfilter_ipv6/ip6t_owner.h
new file mode 100644
index 000000000000..19937da3d101
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_owner.h
@@ -0,0 +1,18 @@
+#ifndef _IP6T_OWNER_H
+#define _IP6T_OWNER_H
+
+/* match and invert flags */
+#define IP6T_OWNER_UID	0x01
+#define IP6T_OWNER_GID	0x02
+#define IP6T_OWNER_PID	0x04
+#define IP6T_OWNER_SID	0x08
+
+struct ip6t_owner_info {
+    uid_t uid;
+    gid_t gid;
+    pid_t pid;
+    pid_t sid;
+    u_int8_t match, invert;	/* flags */
+};
+
+#endif /*_IPT_OWNER_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_physdev.h b/include/linux/netfilter_ipv6/ip6t_physdev.h
new file mode 100644
index 000000000000..c234731cd66b
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_physdev.h
@@ -0,0 +1,24 @@
+#ifndef _IP6T_PHYSDEV_H
+#define _IP6T_PHYSDEV_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#endif
+
+#define IP6T_PHYSDEV_OP_IN		0x01
+#define IP6T_PHYSDEV_OP_OUT		0x02
+#define IP6T_PHYSDEV_OP_BRIDGED		0x04
+#define IP6T_PHYSDEV_OP_ISIN		0x08
+#define IP6T_PHYSDEV_OP_ISOUT		0x10
+#define IP6T_PHYSDEV_OP_MASK		(0x20 - 1)
+
+struct ip6t_physdev_info {
+	char physindev[IFNAMSIZ];
+	char in_mask[IFNAMSIZ];
+	char physoutdev[IFNAMSIZ];
+	char out_mask[IFNAMSIZ];
+	u_int8_t invert;
+	u_int8_t bitmask;
+};
+
+#endif /*_IP6T_PHYSDEV_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_rt.h b/include/linux/netfilter_ipv6/ip6t_rt.h
new file mode 100644
index 000000000000..f1070fbf2757
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_rt.h
@@ -0,0 +1,42 @@
+#ifndef _IP6T_RT_H
+#define _IP6T_RT_H
+
+/*#include <linux/in6.h>*/
+
+#define IP6T_RT_HOPS 16
+
+struct ip6t_rt
+{
+	u_int32_t rt_type;			/* Routing Type */
+	u_int32_t segsleft[2];			/* Segments Left */
+	u_int32_t hdrlen;			/* Header Length */
+	u_int8_t  flags;			/*  */
+	u_int8_t  invflags;			/* Inverse flags */
+	struct in6_addr addrs[IP6T_RT_HOPS];	/* Hops */
+	u_int8_t addrnr;			/* Nr of Addresses */
+};
+
+#define IP6T_RT_TYP 		0x01
+#define IP6T_RT_SGS 		0x02
+#define IP6T_RT_LEN 		0x04
+#define IP6T_RT_RES 		0x08
+#define IP6T_RT_FST_MASK	0x30
+#define IP6T_RT_FST 		0x10
+#define IP6T_RT_FST_NSTRICT	0x20
+
+/* Values for "invflags" field in struct ip6t_rt. */
+#define IP6T_RT_INV_TYP		0x01	/* Invert the sense of type. */
+#define IP6T_RT_INV_SGS		0x02	/* Invert the sense of Segments. */
+#define IP6T_RT_INV_LEN		0x04	/* Invert the sense of length. */
+#define IP6T_RT_INV_MASK	0x07	/* All possible flags. */
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /*_IP6T_RT_H*/
diff --git a/include/linux/netfilter_logging.h b/include/linux/netfilter_logging.h
new file mode 100644
index 000000000000..562bb6aad4e1
--- /dev/null
+++ b/include/linux/netfilter_logging.h
@@ -0,0 +1,33 @@
+/* Internal logging interface, which relies on the real 
+   LOG target modules */
+#ifndef __LINUX_NETFILTER_LOGGING_H
+#define __LINUX_NETFILTER_LOGGING_H
+
+#ifdef __KERNEL__
+#include <asm/atomic.h>
+
+struct nf_logging_t {
+	void (*nf_log_packet)(struct sk_buff **pskb,
+			      unsigned int hooknum,
+			      const struct net_device *in,
+			      const struct net_device *out,
+			      const char *prefix);
+	void (*nf_log)(char *pfh, size_t len,
+		       const char *prefix);
+};
+
+extern void nf_log_register(int pf, const struct nf_logging_t *logging);
+extern void nf_log_unregister(int pf, const struct nf_logging_t *logging);
+
+extern void nf_log_packet(int pf,
+			  struct sk_buff **pskb,
+			  unsigned int hooknum,
+			  const struct net_device *in,
+			  const struct net_device *out,
+			  const char *fmt, ...);
+extern void nf_log(int pf,
+		   char *pfh, size_t len,
+		   const char *fmt, ...);
+#endif /*__KERNEL__*/
+
+#endif /*__LINUX_NETFILTER_LOGGING_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
new file mode 100644
index 000000000000..f731abdc1a29
--- /dev/null
+++ b/include/linux/netlink.h
@@ -0,0 +1,188 @@
+#ifndef __LINUX_NETLINK_H
+#define __LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_SKIP		1	/* Reserved for ENskip  			*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Firewalling hook				*/
+#define NETLINK_TCPDIAG		4	/* TCP socket monitoring			*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ARPD		8
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_ROUTE6		11	/* af_inet6 route comm channel */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_TAPBASE		16	/* 16 to 31 are ethertap */
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl
+{
+	sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* process pid	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr
+{
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process PID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		1	/* It is request message. 	*/
+#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		8	/* Echo this request 		*/
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+struct nlmsgerr
+{
+	int		error;
+	struct nlmsghdr msg;
+};
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+#ifdef __KERNEL__
+
+#include <linux/capability.h>
+#include <linux/skbuff.h>
+
+struct netlink_skb_parms
+{
+	struct ucred		creds;		/* Skb credentials	*/
+	__u32			pid;
+	__u32			groups;
+	__u32			dst_pid;
+	__u32			dst_groups;
+	kernel_cap_t		eff_cap;
+};
+
+#define NETLINK_CB(skb)		(*(struct netlink_skb_parms*)&((skb)->cb))
+#define NETLINK_CREDS(skb)	(&NETLINK_CB((skb)).creds)
+
+
+extern struct sock *netlink_kernel_create(int unit, void (*input)(struct sock *sk, int len));
+extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
+extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock);
+extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid,
+			     __u32 group, int allocation);
+extern void netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code);
+extern int netlink_register_notifier(struct notifier_block *nb);
+extern int netlink_unregister_notifier(struct notifier_block *nb);
+
+/* finegrained unicast helpers: */
+struct sock *netlink_getsockbyfilp(struct file *filp);
+int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, long timeo);
+void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
+int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol);
+
+/*
+ *	skb should fit one page. This choice is good for headerless malloc.
+ */
+#define NLMSG_GOODORDER 0
+#define NLMSG_GOODSIZE (SKB_MAX_ORDER(0, NLMSG_GOODORDER))
+
+
+struct netlink_callback
+{
+	struct sk_buff	*skb;
+	struct nlmsghdr	*nlh;
+	int		(*dump)(struct sk_buff * skb, struct netlink_callback *cb);
+	int		(*done)(struct netlink_callback *cb);
+	int		family;
+	long		args[4];
+};
+
+struct netlink_notify
+{
+	int pid;
+	int protocol;
+};
+
+static __inline__ struct nlmsghdr *
+__nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len)
+{
+	struct nlmsghdr *nlh;
+	int size = NLMSG_LENGTH(len);
+
+	nlh = (struct nlmsghdr*)skb_put(skb, NLMSG_ALIGN(size));
+	nlh->nlmsg_type = type;
+	nlh->nlmsg_len = size;
+	nlh->nlmsg_flags = 0;
+	nlh->nlmsg_pid = pid;
+	nlh->nlmsg_seq = seq;
+	return nlh;
+}
+
+#define NLMSG_PUT(skb, pid, seq, type, len) \
+({ if (skb_tailroom(skb) < (int)NLMSG_SPACE(len)) goto nlmsg_failure; \
+   __nlmsg_put(skb, pid, seq, type, len); })
+
+extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
+			      struct nlmsghdr *nlh,
+			      int (*dump)(struct sk_buff *skb, struct netlink_callback*),
+			      int (*done)(struct netlink_callback*));
+
+
+#define NL_NONROOT_RECV 0x1
+#define NL_NONROOT_SEND 0x2
+extern void netlink_set_nonroot(int protocol, unsigned flag);
+
+#endif /* __KERNEL__ */
+
+#endif	/* __LINUX_NETLINK_H */
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
new file mode 100644
index 000000000000..c0d8b90c5202
--- /dev/null
+++ b/include/linux/netpoll.h
@@ -0,0 +1,67 @@
+/*
+ * Common code for low-level network console, dump, and debugger code
+ *
+ * Derived from netconsole, kgdb-over-ethernet, and netdump patches
+ */
+
+#ifndef _LINUX_NETPOLL_H
+#define _LINUX_NETPOLL_H
+
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+
+struct netpoll;
+
+struct netpoll {
+	struct net_device *dev;
+	char dev_name[16], *name;
+	int rx_flags;
+	void (*rx_hook)(struct netpoll *, int, char *, int);
+	void (*drop)(struct sk_buff *skb);
+	u32 local_ip, remote_ip;
+	u16 local_port, remote_port;
+	unsigned char local_mac[6], remote_mac[6];
+	spinlock_t poll_lock;
+	int poll_owner;
+};
+
+void netpoll_poll(struct netpoll *np);
+void netpoll_send_udp(struct netpoll *np, const char *msg, int len);
+int netpoll_parse_options(struct netpoll *np, char *opt);
+int netpoll_setup(struct netpoll *np);
+int netpoll_trap(void);
+void netpoll_set_trap(int trap);
+void netpoll_cleanup(struct netpoll *np);
+int __netpoll_rx(struct sk_buff *skb);
+void netpoll_queue(struct sk_buff *skb);
+
+#ifdef CONFIG_NETPOLL
+static inline int netpoll_rx(struct sk_buff *skb)
+{
+	return skb->dev->np && skb->dev->np->rx_flags && __netpoll_rx(skb);
+}
+
+static inline void netpoll_poll_lock(struct net_device *dev)
+{
+	if (dev->np) {
+		spin_lock(&dev->np->poll_lock);
+		dev->np->poll_owner = smp_processor_id();
+	}
+}
+
+static inline void netpoll_poll_unlock(struct net_device *dev)
+{
+	if (dev->np) {
+		spin_unlock(&dev->np->poll_lock);
+		dev->np->poll_owner = -1;
+	}
+}
+
+#else
+#define netpoll_rx(a) 0
+#define netpoll_poll_lock(a)
+#define netpoll_poll_unlock(a)
+#endif
+
+#endif
diff --git a/include/linux/netrom.h b/include/linux/netrom.h
new file mode 100644
index 000000000000..6939b32f66a0
--- /dev/null
+++ b/include/linux/netrom.h
@@ -0,0 +1,34 @@
+/*
+ * These are the public elements of the Linux kernel NET/ROM implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	NETROM_KERNEL_H
+#define	NETROM_KERNEL_H
+
+#define NETROM_MTU	236
+
+#define NETROM_T1	1
+#define NETROM_T2	2
+#define NETROM_N2	3
+#define	NETROM_T4	6
+#define	NETROM_IDLE	7
+
+#define	SIOCNRDECOBS		(SIOCPROTOPRIVATE+2)
+
+struct nr_route_struct {
+#define	NETROM_NEIGH	0
+#define	NETROM_NODE	1
+	int		type;
+	ax25_address	callsign;
+	char		device[16];
+	unsigned int	quality;
+	char		mnemonic[7];
+	ax25_address	neighbour;
+	unsigned int	obs_count;
+	unsigned int	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+#endif
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
new file mode 100644
index 000000000000..ca2ffa6ae1d5
--- /dev/null
+++ b/include/linux/nfs.h
@@ -0,0 +1,171 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _LINUX_NFS_H
+#define _LINUX_NFS_H
+
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/string.h>
+
+#define NFS_PROGRAM	100003
+#define NFS_PORT	2049
+#define NFS_MAXDATA	8192
+#define NFS_MAXPATHLEN	1024
+#define NFS_MAXNAMLEN	255
+#define NFS_MAXGROUPS	16
+#define NFS_FHSIZE	32
+#define NFS_COOKIESIZE	4
+#define NFS_FIFO_DEV	(-1)
+#define NFSMODE_FMT	0170000
+#define NFSMODE_DIR	0040000
+#define NFSMODE_CHR	0020000
+#define NFSMODE_BLK	0060000
+#define NFSMODE_REG	0100000
+#define NFSMODE_LNK	0120000
+#define NFSMODE_SOCK	0140000
+#define NFSMODE_FIFO	0010000
+
+#define NFS_MNT_PROGRAM	100005
+#define NFS_MNT_PORT	627
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+	NFS_OK = 0,			/* v2 v3 v4 */
+	NFSERR_PERM = 1,		/* v2 v3 v4 */
+	NFSERR_NOENT = 2,		/* v2 v3 v4 */
+	NFSERR_IO = 5,			/* v2 v3 v4 */
+	NFSERR_NXIO = 6,		/* v2 v3 v4 */
+	NFSERR_EAGAIN = 11,		/* v2 v3 */
+	NFSERR_ACCES = 13,		/* v2 v3 v4 */
+	NFSERR_EXIST = 17,		/* v2 v3 v4 */
+	NFSERR_XDEV = 18,		/*    v3 v4 */
+	NFSERR_NODEV = 19,		/* v2 v3 v4 */
+	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
+	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
+	NFSERR_INVAL = 22,		/* v2 v3 v4 */
+	NFSERR_FBIG = 27,		/* v2 v3 v4 */
+	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
+	NFSERR_ROFS = 30,		/* v2 v3 v4 */
+	NFSERR_MLINK = 31,		/*    v3 v4 */
+	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
+	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
+	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
+	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
+	NFSERR_STALE = 70,		/* v2 v3 v4 */
+	NFSERR_REMOTE = 71,		/* v2 v3 */
+	NFSERR_WFLUSH = 99,		/* v2    */
+	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
+	NFSERR_NOT_SYNC = 10002,	/*    v3 */
+	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
+	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
+	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
+	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
+	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
+	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
+	NFSERR_SAME = 10009,		/*       v4 */
+	NFSERR_DENIED = 10010,		/*       v4 */
+	NFSERR_EXPIRED = 10011,		/*       v4 */
+	NFSERR_LOCKED = 10012,		/*       v4 */
+	NFSERR_GRACE = 10013,		/*       v4 */
+	NFSERR_FHEXPIRED = 10014,	/*       v4 */
+	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
+	NFSERR_WRONGSEC = 10016,	/*       v4 */
+	NFSERR_CLID_INUSE = 10017,	/*       v4 */
+	NFSERR_RESOURCE = 10018,	/*       v4 */
+	NFSERR_MOVED = 10019,		/*       v4 */
+	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
+	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
+	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
+	NFSERR_STALE_STATEID = 10023,   /*       v4 */
+	NFSERR_OLD_STATEID = 10024,     /*       v4 */
+	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
+	NFSERR_BAD_SEQID = 10026,	/*       v4 */
+	NFSERR_NOT_SAME = 10027,	/*       v4 */
+	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
+	NFSERR_SYMLINK = 10029,		/*       v4 */
+	NFSERR_RESTOREFH = 10030,	/*       v4 */
+	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
+	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
+	NFSERR_NO_GRACE = 10033,	/*       v4 */
+	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
+	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
+	NFSERR_BAD_XDR = 10036,		/*       v4 */
+	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
+	NFSERR_OPENMODE = 10038,       /*       v4 */
+	NFSERR_BADOWNER = 10039,       /*       v4 */
+	NFSERR_BADCHAR = 10040,        /*       v4 */
+	NFSERR_BADNAME = 10041,        /*       v4 */
+	NFSERR_BAD_RANGE = 10042,      /*       v4 */
+	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
+	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
+	NFSERR_DEADLOCK = 10045,       /*       v4 */
+	NFSERR_FILE_OPEN = 10046,      /*       v4 */
+	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
+	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
+	NFSERR_REPLAY_ME = 10049	/*       v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+	NFNON = 0,
+	NFREG = 1,
+	NFDIR = 2,
+	NFBLK = 3,
+	NFCHR = 4,
+	NFLNK = 5,
+	NFSOCK = 6,
+	NFBAD = 7,
+	NFFIFO = 8
+};
+
+#if defined(__KERNEL__)
+/*
+ * This is the kernel NFS client file handle representation
+ */
+#define NFS_MAXFHSIZE		128
+struct nfs_fh {
+	unsigned short		size;
+	unsigned char		data[NFS_MAXFHSIZE];
+};
+
+/*
+ * Returns a zero iff the size and data fields match.
+ * Checks only "size" bytes in the data field.
+ */
+static inline int nfs_compare_fh(const struct nfs_fh *a, const struct nfs_fh *b)
+{
+	return a->size != b->size || memcmp(a->data, b->data, a->size) != 0;
+}
+
+static inline void nfs_copy_fh(struct nfs_fh *target, const struct nfs_fh *source)
+{
+	target->size = source->size;
+	memcpy(target->data, source->data, source->size);
+}
+
+
+/*
+ * This is really a general kernel constant, but since nothing like
+ * this is defined in the kernel headers, I have to do it here.
+ */
+#define NFS_OFFSET_MAX		((__s64)((~(__u64)0) >> 1))
+
+
+enum nfs3_stable_how {
+	NFS_UNSTABLE = 0,
+	NFS_DATA_SYNC = 1,
+	NFS_FILE_SYNC = 2
+};
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h
new file mode 100644
index 000000000000..0ed9517138fc
--- /dev/null
+++ b/include/linux/nfs2.h
@@ -0,0 +1,74 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants for Version 2 of the protocol.
+ */
+#ifndef _LINUX_NFS2_H
+#define _LINUX_NFS2_H
+
+#define NFS2_PORT	2049
+#define NFS2_MAXDATA	8192
+#define NFS2_MAXPATHLEN	1024
+#define NFS2_MAXNAMLEN	255
+#define NFS2_MAXGROUPS	16
+#define NFS2_FHSIZE	32
+#define NFS2_COOKIESIZE	4
+#define NFS2_FIFO_DEV	(-1)
+#define NFS2MODE_FMT	0170000
+#define NFS2MODE_DIR	0040000
+#define NFS2MODE_CHR	0020000
+#define NFS2MODE_BLK	0060000
+#define NFS2MODE_REG	0100000
+#define NFS2MODE_LNK	0120000
+#define NFS2MODE_SOCK	0140000
+#define NFS2MODE_FIFO	0010000
+
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+enum nfs2_ftype {
+	NF2NON = 0,
+	NF2REG = 1,
+	NF2DIR = 2,
+	NF2BLK = 3,
+	NF2CHR = 4,
+	NF2LNK = 5,
+	NF2SOCK = 6,
+	NF2BAD = 7,
+	NF2FIFO = 8
+};
+
+struct nfs2_fh {
+	char			data[NFS2_FHSIZE];
+};
+
+/*
+ * Procedure numbers for NFSv2
+ */
+#define NFS2_VERSION		2
+#define NFSPROC_NULL		0
+#define NFSPROC_GETATTR		1
+#define NFSPROC_SETATTR		2
+#define NFSPROC_ROOT		3
+#define NFSPROC_LOOKUP		4
+#define NFSPROC_READLINK	5
+#define NFSPROC_READ		6
+#define NFSPROC_WRITECACHE	7
+#define NFSPROC_WRITE		8
+#define NFSPROC_CREATE		9
+#define NFSPROC_REMOVE		10
+#define NFSPROC_RENAME		11
+#define NFSPROC_LINK		12
+#define NFSPROC_SYMLINK		13
+#define NFSPROC_MKDIR		14
+#define NFSPROC_RMDIR		15
+#define NFSPROC_READDIR		16
+#define NFSPROC_STATFS		17
+
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define MNTPROC_NULL		0
+#define MNTPROC_MNT		1
+#define MNTPROC_UMNT		3
+#define MNTPROC_UMNTALL		4
+
+#endif /* _LINUX_NFS2_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
new file mode 100644
index 000000000000..7f11fa589207
--- /dev/null
+++ b/include/linux/nfs3.h
@@ -0,0 +1,105 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _LINUX_NFS3_H
+#define _LINUX_NFS3_H
+
+#define NFS3_PORT		2049
+#define NFS3_MAXDATA		32768
+#define NFS3_MAXPATHLEN		PATH_MAX
+#define NFS3_MAXNAMLEN		NAME_MAX
+#define NFS3_MAXGROUPS		16
+#define NFS3_FHSIZE		64
+#define NFS3_COOKIESIZE		4
+#define NFS3_FIFO_DEV		(-1)
+#define NFS3MODE_FMT		0170000
+#define NFS3MODE_DIR		0040000
+#define NFS3MODE_CHR		0020000
+#define NFS3MODE_BLK		0060000
+#define NFS3MODE_REG		0100000
+#define NFS3MODE_LNK		0120000
+#define NFS3MODE_SOCK		0140000
+#define NFS3MODE_FIFO		0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ	0x0001
+#define NFS3_ACCESS_LOOKUP	0x0002
+#define NFS3_ACCESS_MODIFY	0x0004
+#define NFS3_ACCESS_EXTEND	0x0008
+#define NFS3_ACCESS_DELETE	0x0010
+#define NFS3_ACCESS_EXECUTE	0x0020
+#define NFS3_ACCESS_FULL	0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+	NFS3_CREATE_UNCHECKED = 0,
+	NFS3_CREATE_GUARDED = 1,
+	NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK		0x0001
+#define NFS3_FSF_SYMLINK	0x0002
+#define NFS3_FSF_HOMOGENEOUS	0x0008
+#define NFS3_FSF_CANSETTIME	0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT	0x001B
+#define NFS3_FSF_BILLYBOY	0x0018
+#define NFS3_FSF_READONLY	0x0008
+
+enum nfs3_ftype {
+	NF3NON  = 0,
+	NF3REG  = 1,
+	NF3DIR  = 2,
+	NF3BLK  = 3,
+	NF3CHR  = 4,
+	NF3LNK  = 5,
+	NF3SOCK = 6,
+	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
+	NF3BAD  = 8
+};
+
+struct nfs3_fh {
+	unsigned short size;
+	unsigned char  data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION		3
+#define NFS3PROC_NULL		0
+#define NFS3PROC_GETATTR	1
+#define NFS3PROC_SETATTR	2
+#define NFS3PROC_LOOKUP		3
+#define NFS3PROC_ACCESS		4
+#define NFS3PROC_READLINK	5
+#define NFS3PROC_READ		6
+#define NFS3PROC_WRITE		7
+#define NFS3PROC_CREATE		8
+#define NFS3PROC_MKDIR		9
+#define NFS3PROC_SYMLINK	10
+#define NFS3PROC_MKNOD		11
+#define NFS3PROC_REMOVE		12
+#define NFS3PROC_RMDIR		13
+#define NFS3PROC_RENAME		14
+#define NFS3PROC_LINK		15
+#define NFS3PROC_READDIR	16
+#define NFS3PROC_READDIRPLUS	17
+#define NFS3PROC_FSSTAT		18
+#define NFS3PROC_FSINFO		19
+#define NFS3PROC_PATHCONF	20
+#define NFS3PROC_COMMIT		21
+
+#define NFS_MNT3_PROGRAM	100005
+#define NFS_MNT3_VERSION	3
+#define MOUNTPROC3_NULL		0
+#define MOUNTPROC3_MNT		1
+#define MOUNTPROC3_UMNT		3
+#define MOUNTPROC3_UMNTALL	4
+ 
+
+#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES)
+
+/* Number of 32bit words in post_op_attr */
+#define NFS3_POST_OP_ATTR_WORDS		22
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
new file mode 100644
index 000000000000..5ca8a8d8ccdf
--- /dev/null
+++ b/include/linux/nfs4.h
@@ -0,0 +1,394 @@
+/*
+ *  include/linux/nfs4.h
+ *
+ *  NFSv4 protocol definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#ifndef _LINUX_NFS4_H
+#define _LINUX_NFS4_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#define NFS4_VERIFIER_SIZE	8
+#define NFS4_FHSIZE		128
+#define NFS4_MAXPATHLEN		PATH_MAX
+#define NFS4_MAXNAMLEN		NAME_MAX
+
+#define NFS4_ACCESS_READ        0x0001
+#define NFS4_ACCESS_LOOKUP      0x0002
+#define NFS4_ACCESS_MODIFY      0x0004
+#define NFS4_ACCESS_EXTEND      0x0008
+#define NFS4_ACCESS_DELETE      0x0010
+#define NFS4_ACCESS_EXECUTE     0x0020
+
+#define NFS4_FH_PERISTENT		0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
+#define NFS4_FH_VOLATILE_ANY		0x0002
+#define NFS4_FH_VOL_MIGRATION		0x0004
+#define NFS4_FH_VOL_RENAME		0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_READ	0x0001
+#define NFS4_SHARE_ACCESS_WRITE	0x0002
+#define NFS4_SHARE_ACCESS_BOTH	0x0003
+#define NFS4_SHARE_DENY_READ	0x0001
+#define NFS4_SHARE_DENY_WRITE	0x0002
+#define NFS4_SHARE_DENY_BOTH	0x0003
+
+#define NFS4_SET_TO_SERVER_TIME	0
+#define NFS4_SET_TO_CLIENT_TIME	1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL  0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
+#define NFS4_ACE_OWNER                        0x00000080
+#define NFS4_ACE_GROUP                        0x00000100
+#define NFS4_ACE_EVERYONE                     0x00000200
+
+#define NFS4_ACE_READ_DATA                    0x00000001
+#define NFS4_ACE_LIST_DIRECTORY               0x00000001
+#define NFS4_ACE_WRITE_DATA                   0x00000002
+#define NFS4_ACE_ADD_FILE                     0x00000002
+#define NFS4_ACE_APPEND_DATA                  0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
+#define NFS4_ACE_EXECUTE                      0x00000020
+#define NFS4_ACE_DELETE_CHILD                 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
+#define NFS4_ACE_DELETE                       0x00010000
+#define NFS4_ACE_READ_ACL                     0x00020000
+#define NFS4_ACE_WRITE_ACL                    0x00040000
+#define NFS4_ACE_WRITE_OWNER                  0x00080000
+#define NFS4_ACE_SYNCHRONIZE                  0x00100000
+#define NFS4_ACE_GENERIC_READ                 0x00120081
+#define NFS4_ACE_GENERIC_WRITE                0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
+#define NFS4_ACE_MASK_ALL                     0x001F01FF
+
+enum nfs4_acl_whotype {
+	NFS4_ACL_WHO_NAMED = 0,
+	NFS4_ACL_WHO_OWNER,
+	NFS4_ACL_WHO_GROUP,
+	NFS4_ACL_WHO_EVERYONE,
+};
+
+struct nfs4_ace {
+	uint32_t	type;
+	uint32_t	flag;
+	uint32_t	access_mask;
+	int		whotype;
+	uid_t		who;
+	struct list_head l_ace;
+};
+
+struct nfs4_acl {
+	uint32_t	naces;
+	struct list_head ace_head;
+};
+
+typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier;
+typedef struct { char data[16]; } nfs4_stateid;
+
+enum nfs_opnum4 {
+	OP_ACCESS = 3,
+	OP_CLOSE = 4,
+	OP_COMMIT = 5,
+	OP_CREATE = 6,
+	OP_DELEGPURGE = 7,
+	OP_DELEGRETURN = 8,
+	OP_GETATTR = 9,
+	OP_GETFH = 10,
+	OP_LINK = 11,
+	OP_LOCK = 12,
+	OP_LOCKT = 13,
+	OP_LOCKU = 14,
+	OP_LOOKUP = 15,
+	OP_LOOKUPP = 16,
+	OP_NVERIFY = 17,
+	OP_OPEN = 18,
+	OP_OPENATTR = 19,
+	OP_OPEN_CONFIRM = 20,
+	OP_OPEN_DOWNGRADE = 21,
+	OP_PUTFH = 22,
+	OP_PUTPUBFH = 23,
+	OP_PUTROOTFH = 24,
+	OP_READ = 25,
+	OP_READDIR = 26,
+	OP_READLINK = 27,
+	OP_REMOVE = 28,
+	OP_RENAME = 29,
+	OP_RENEW = 30,
+	OP_RESTOREFH = 31,
+	OP_SAVEFH = 32,
+	OP_SECINFO = 33,
+	OP_SETATTR = 34,
+	OP_SETCLIENTID = 35,
+	OP_SETCLIENTID_CONFIRM = 36,
+	OP_VERIFY = 37,
+	OP_WRITE = 38,
+	OP_RELEASE_LOCKOWNER = 39,
+	OP_ILLEGAL = 10044,
+};
+
+enum nfsstat4 {
+	NFS4_OK = 0,
+	NFS4ERR_PERM = 1,
+	NFS4ERR_NOENT = 2,
+	NFS4ERR_IO = 5,
+	NFS4ERR_NXIO = 6,
+	NFS4ERR_ACCESS = 13,
+	NFS4ERR_EXIST = 17,
+	NFS4ERR_XDEV = 18,
+	/* Unused/reserved 19 */
+	NFS4ERR_NOTDIR = 20,
+	NFS4ERR_ISDIR = 21,
+	NFS4ERR_INVAL = 22,
+	NFS4ERR_FBIG = 27,
+	NFS4ERR_NOSPC = 28,
+	NFS4ERR_ROFS = 30,
+	NFS4ERR_MLINK = 31,
+	NFS4ERR_NAMETOOLONG = 63,
+	NFS4ERR_NOTEMPTY = 66,
+	NFS4ERR_DQUOT = 69,
+	NFS4ERR_STALE = 70,
+	NFS4ERR_BADHANDLE = 10001,
+	NFS4ERR_BAD_COOKIE = 10003,
+	NFS4ERR_NOTSUPP = 10004,
+	NFS4ERR_TOOSMALL = 10005,
+	NFS4ERR_SERVERFAULT = 10006,
+	NFS4ERR_BADTYPE = 10007,
+	NFS4ERR_DELAY = 10008,
+	NFS4ERR_SAME = 10009,
+	NFS4ERR_DENIED = 10010,
+	NFS4ERR_EXPIRED = 10011,
+	NFS4ERR_LOCKED = 10012,
+	NFS4ERR_GRACE = 10013,
+	NFS4ERR_FHEXPIRED = 10014,
+	NFS4ERR_SHARE_DENIED = 10015,
+	NFS4ERR_WRONGSEC = 10016,
+	NFS4ERR_CLID_INUSE = 10017,
+	NFS4ERR_RESOURCE = 10018,
+	NFS4ERR_MOVED = 10019,
+	NFS4ERR_NOFILEHANDLE = 10020,
+	NFS4ERR_MINOR_VERS_MISMATCH = 10021,
+	NFS4ERR_STALE_CLIENTID = 10022,
+	NFS4ERR_STALE_STATEID = 10023,
+	NFS4ERR_OLD_STATEID = 10024,
+	NFS4ERR_BAD_STATEID = 10025,
+	NFS4ERR_BAD_SEQID = 10026,
+	NFS4ERR_NOT_SAME = 10027,
+	NFS4ERR_LOCK_RANGE = 10028,
+	NFS4ERR_SYMLINK = 10029,
+	NFS4ERR_RESTOREFH = 10030,
+	NFS4ERR_LEASE_MOVED = 10031,
+	NFS4ERR_ATTRNOTSUPP = 10032,
+	NFS4ERR_NO_GRACE = 10033,
+	NFS4ERR_RECLAIM_BAD = 10034,
+	NFS4ERR_RECLAIM_CONFLICT = 10035,
+	NFS4ERR_BADXDR = 10036,
+	NFS4ERR_LOCKS_HELD = 10037,
+	NFS4ERR_OPENMODE = 10038,
+	NFS4ERR_BADOWNER = 10039,
+	NFS4ERR_BADCHAR = 10040,
+	NFS4ERR_BADNAME = 10041,
+	NFS4ERR_BAD_RANGE = 10042,
+	NFS4ERR_LOCK_NOTSUPP = 10043,
+	NFS4ERR_OP_ILLEGAL = 10044,
+	NFS4ERR_DEADLOCK = 10045,
+	NFS4ERR_FILE_OPEN = 10046,
+	NFS4ERR_ADMIN_REVOKED = 10047,
+	NFS4ERR_CB_PATH_DOWN = 10048
+};
+
+/*
+ * Note: NF4BAD is not actually part of the protocol; it is just used
+ * internally by nfsd.
+ */
+enum nfs_ftype4 {
+	NF4BAD		= 0,
+        NF4REG          = 1,    /* Regular File */
+        NF4DIR          = 2,    /* Directory */
+        NF4BLK          = 3,    /* Special File - block device */
+        NF4CHR          = 4,    /* Special File - character device */
+        NF4LNK          = 5,    /* Symbolic Link */
+        NF4SOCK         = 6,    /* Special File - socket */
+        NF4FIFO         = 7,    /* Special File - fifo */
+        NF4ATTRDIR      = 8,    /* Attribute Directory */
+        NF4NAMEDATTR    = 9     /* Named Attribute */
+};
+
+enum open_claim_type4 {
+	NFS4_OPEN_CLAIM_NULL = 0,
+	NFS4_OPEN_CLAIM_PREVIOUS = 1,
+	NFS4_OPEN_CLAIM_DELEGATE_CUR = 2,
+	NFS4_OPEN_CLAIM_DELEGATE_PREV = 3
+};
+
+enum opentype4 {
+	NFS4_OPEN_NOCREATE = 0,
+	NFS4_OPEN_CREATE = 1
+};
+
+enum createmode4 {
+	NFS4_CREATE_UNCHECKED = 0,
+	NFS4_CREATE_GUARDED = 1,
+	NFS4_CREATE_EXCLUSIVE = 2
+};
+
+enum limit_by4 {
+	NFS4_LIMIT_SIZE = 1,
+	NFS4_LIMIT_BLOCKS = 2
+};
+
+enum open_delegation_type4 {
+	NFS4_OPEN_DELEGATE_NONE = 0,
+	NFS4_OPEN_DELEGATE_READ = 1,
+	NFS4_OPEN_DELEGATE_WRITE = 2
+};
+
+enum lock_type4 {
+	NFS4_UNLOCK_LT = 0,
+	NFS4_READ_LT = 1,
+	NFS4_WRITE_LT = 2,
+	NFS4_READW_LT = 3,
+	NFS4_WRITEW_LT = 4
+};
+
+
+/* Mandatory Attributes */
+#define FATTR4_WORD0_SUPPORTED_ATTRS    (1UL << 0)
+#define FATTR4_WORD0_TYPE               (1UL << 1)
+#define FATTR4_WORD0_FH_EXPIRE_TYPE     (1UL << 2)
+#define FATTR4_WORD0_CHANGE             (1UL << 3)
+#define FATTR4_WORD0_SIZE               (1UL << 4)
+#define FATTR4_WORD0_LINK_SUPPORT       (1UL << 5)
+#define FATTR4_WORD0_SYMLINK_SUPPORT    (1UL << 6)
+#define FATTR4_WORD0_NAMED_ATTR         (1UL << 7)
+#define FATTR4_WORD0_FSID               (1UL << 8)
+#define FATTR4_WORD0_UNIQUE_HANDLES     (1UL << 9)
+#define FATTR4_WORD0_LEASE_TIME         (1UL << 10)
+#define FATTR4_WORD0_RDATTR_ERROR       (1UL << 11)
+
+/* Recommended Attributes */
+#define FATTR4_WORD0_ACL                (1UL << 12)
+#define FATTR4_WORD0_ACLSUPPORT         (1UL << 13)
+#define FATTR4_WORD0_ARCHIVE            (1UL << 14)
+#define FATTR4_WORD0_CANSETTIME         (1UL << 15)
+#define FATTR4_WORD0_CASE_INSENSITIVE   (1UL << 16)
+#define FATTR4_WORD0_CASE_PRESERVING    (1UL << 17)
+#define FATTR4_WORD0_CHOWN_RESTRICTED   (1UL << 18)
+#define FATTR4_WORD0_FILEHANDLE         (1UL << 19)
+#define FATTR4_WORD0_FILEID             (1UL << 20)
+#define FATTR4_WORD0_FILES_AVAIL        (1UL << 21)
+#define FATTR4_WORD0_FILES_FREE         (1UL << 22)
+#define FATTR4_WORD0_FILES_TOTAL        (1UL << 23)
+#define FATTR4_WORD0_FS_LOCATIONS       (1UL << 24)
+#define FATTR4_WORD0_HIDDEN             (1UL << 25)
+#define FATTR4_WORD0_HOMOGENEOUS        (1UL << 26)
+#define FATTR4_WORD0_MAXFILESIZE        (1UL << 27)
+#define FATTR4_WORD0_MAXLINK            (1UL << 28)
+#define FATTR4_WORD0_MAXNAME            (1UL << 29)
+#define FATTR4_WORD0_MAXREAD            (1UL << 30)
+#define FATTR4_WORD0_MAXWRITE           (1UL << 31)
+#define FATTR4_WORD1_MIMETYPE           (1UL << 0)
+#define FATTR4_WORD1_MODE               (1UL << 1)
+#define FATTR4_WORD1_NO_TRUNC           (1UL << 2)
+#define FATTR4_WORD1_NUMLINKS           (1UL << 3)
+#define FATTR4_WORD1_OWNER              (1UL << 4)
+#define FATTR4_WORD1_OWNER_GROUP        (1UL << 5)
+#define FATTR4_WORD1_QUOTA_HARD         (1UL << 6)
+#define FATTR4_WORD1_QUOTA_SOFT         (1UL << 7)
+#define FATTR4_WORD1_QUOTA_USED         (1UL << 8)
+#define FATTR4_WORD1_RAWDEV             (1UL << 9)
+#define FATTR4_WORD1_SPACE_AVAIL        (1UL << 10)
+#define FATTR4_WORD1_SPACE_FREE         (1UL << 11)
+#define FATTR4_WORD1_SPACE_TOTAL        (1UL << 12)
+#define FATTR4_WORD1_SPACE_USED         (1UL << 13)
+#define FATTR4_WORD1_SYSTEM             (1UL << 14)
+#define FATTR4_WORD1_TIME_ACCESS        (1UL << 15)
+#define FATTR4_WORD1_TIME_ACCESS_SET    (1UL << 16)
+#define FATTR4_WORD1_TIME_BACKUP        (1UL << 17)
+#define FATTR4_WORD1_TIME_CREATE        (1UL << 18)
+#define FATTR4_WORD1_TIME_DELTA         (1UL << 19)
+#define FATTR4_WORD1_TIME_METADATA      (1UL << 20)
+#define FATTR4_WORD1_TIME_MODIFY        (1UL << 21)
+#define FATTR4_WORD1_TIME_MODIFY_SET    (1UL << 22)
+#define FATTR4_WORD1_MOUNTED_ON_FILEID  (1UL << 23)
+
+#define NFSPROC4_NULL 0
+#define NFSPROC4_COMPOUND 1
+#define NFS4_MINOR_VERSION 0
+#define NFS4_DEBUG 1
+
+#ifdef __KERNEL__
+
+/* Index of predefined Linux client operations */
+
+enum {
+	NFSPROC4_CLNT_NULL = 0,		/* Unused */
+	NFSPROC4_CLNT_READ,
+	NFSPROC4_CLNT_WRITE,
+	NFSPROC4_CLNT_COMMIT,
+	NFSPROC4_CLNT_OPEN,
+	NFSPROC4_CLNT_OPEN_CONFIRM,
+	NFSPROC4_CLNT_OPEN_NOATTR,
+	NFSPROC4_CLNT_OPEN_DOWNGRADE,
+	NFSPROC4_CLNT_CLOSE,
+	NFSPROC4_CLNT_SETATTR,
+	NFSPROC4_CLNT_FSINFO,
+	NFSPROC4_CLNT_RENEW,
+	NFSPROC4_CLNT_SETCLIENTID,
+	NFSPROC4_CLNT_SETCLIENTID_CONFIRM,
+	NFSPROC4_CLNT_LOCK,
+	NFSPROC4_CLNT_LOCKT,
+	NFSPROC4_CLNT_LOCKU,
+	NFSPROC4_CLNT_ACCESS,
+	NFSPROC4_CLNT_GETATTR,
+	NFSPROC4_CLNT_LOOKUP,
+	NFSPROC4_CLNT_LOOKUP_ROOT,
+	NFSPROC4_CLNT_REMOVE,
+	NFSPROC4_CLNT_RENAME,
+	NFSPROC4_CLNT_LINK,
+	NFSPROC4_CLNT_SYMLINK,
+	NFSPROC4_CLNT_CREATE,
+	NFSPROC4_CLNT_PATHCONF,
+	NFSPROC4_CLNT_STATFS,
+	NFSPROC4_CLNT_READLINK,
+	NFSPROC4_CLNT_READDIR,
+	NFSPROC4_CLNT_SERVER_CAPS,
+	NFSPROC4_CLNT_DELEGRETURN,
+};
+
+#endif
+#endif
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfs4_acl.h b/include/linux/nfs4_acl.h
new file mode 100644
index 000000000000..22aff4d01f20
--- /dev/null
+++ b/include/linux/nfs4_acl.h
@@ -0,0 +1,59 @@
+/*
+ *  include/linux/nfs4_acl.c
+ *
+ *  Common NFSv4 ACL handling definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_NFS4_ACL_H
+#define LINUX_NFS4_ACL_H
+
+#include <linux/posix_acl.h>
+
+struct nfs4_acl *nfs4_acl_new(void);
+void nfs4_acl_free(struct nfs4_acl *);
+int nfs4_acl_add_ace(struct nfs4_acl *, u32, u32, u32, int, uid_t);
+int nfs4_acl_get_whotype(char *, u32);
+int nfs4_acl_write_who(int who, char *p);
+int nfs4_acl_permission(struct nfs4_acl *acl, uid_t owner, gid_t group,
+		                        uid_t who, u32 mask);
+
+#define NFS4_ACL_TYPE_DEFAULT	0x01
+#define NFS4_ACL_DIR		0x02
+#define NFS4_ACL_OWNER		0x04
+
+struct nfs4_acl *nfs4_acl_posix_to_nfsv4(struct posix_acl *,
+				struct posix_acl *, unsigned int flags);
+int nfs4_acl_nfsv4_to_posix(struct nfs4_acl *, struct posix_acl **,
+				struct posix_acl **, unsigned int flags);
+
+#endif /* LINUX_NFS4_ACL_H */
diff --git a/include/linux/nfs4_mount.h b/include/linux/nfs4_mount.h
new file mode 100644
index 000000000000..26b4c83f831d
--- /dev/null
+++ b/include/linux/nfs4_mount.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_NFS4_MOUNT_H
+#define _LINUX_NFS4_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs4_mount.h
+ *
+ *  Copyright (C) 2002  Trond Myklebust
+ *
+ *  structure passed from user-space to kernel-space during an nfsv4 mount
+ */
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS4_MOUNT_VERSION	1
+
+struct nfs_string {
+	unsigned int len;
+	const char __user * data;
+};
+
+struct nfs4_mount_data {
+	int version;				/* 1 */
+	int flags;				/* 1 */
+	int rsize;				/* 1 */
+	int wsize;				/* 1 */
+	int timeo;				/* 1 */
+	int retrans;				/* 1 */
+	int acregmin;				/* 1 */
+	int acregmax;				/* 1 */
+	int acdirmin;				/* 1 */
+	int acdirmax;				/* 1 */
+
+	/* see the definition of 'struct clientaddr4' in RFC3010 */
+	struct nfs_string client_addr;		/* 1 */
+
+	/* Mount path */
+	struct nfs_string mnt_path;		/* 1 */
+
+	/* Server details */
+	struct nfs_string hostname;		/* 1 */
+	/* Server IP address */
+	unsigned int host_addrlen;		/* 1 */
+	struct sockaddr __user * host_addr;	/* 1 */
+
+	/* Transport protocol to use */
+	int proto;				/* 1 */
+
+	/* Pseudo-flavours to use for authentication. See RFC2623 */
+	int auth_flavourlen;			/* 1 */
+	int __user *auth_flavours;		/* 1 */
+};
+
+/* bits in the flags field */
+/* Note: the fields that correspond to existing NFSv2/v3 mount options
+ * 	 should mirror the values from include/linux/nfs_mount.h
+ */
+
+#define NFS4_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS4_MOUNT_INTR		0x0002	/* 1 */
+#define NFS4_MOUNT_NOCTO	0x0010	/* 1 */
+#define NFS4_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS4_MOUNT_STRICTLOCK	0x1000	/* 1 */
+#define NFS4_MOUNT_FLAGMASK	0xFFFF
+
+#endif
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
new file mode 100644
index 000000000000..dbac7f363e5d
--- /dev/null
+++ b/include/linux/nfs_fs.h
@@ -0,0 +1,767 @@
+/*
+ *  linux/include/linux/nfs_fs.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _LINUX_NFS_FS_H
+#define _LINUX_NFS_FS_H
+
+#include <linux/config.h>
+#include <linux/in.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <linux/wait.h>
+#include <linux/uio.h>
+
+#include <linux/nfs_fs_sb.h>
+
+#include <linux/sunrpc/debug.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/clnt.h>
+
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+#include <linux/nfs_xdr.h>
+#include <linux/rwsem.h>
+#include <linux/workqueue.h>
+#include <linux/mempool.h>
+
+/*
+ * Enable debugging support for nfs client.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define NFS_DEBUG
+#endif
+
+#define NFS_MAX_FILE_IO_BUFFER_SIZE	32768
+#define NFS_DEF_FILE_IO_BUFFER_SIZE	4096
+
+/*
+ * The upper limit on timeouts for the exponential backoff algorithm.
+ */
+#define NFS_WRITEBACK_DELAY		(5*HZ)
+#define NFS_WRITEBACK_LOCKDELAY		(60*HZ)
+#define NFS_COMMIT_DELAY		(5*HZ)
+
+/*
+ * superblock magic number for NFS
+ */
+#define NFS_SUPER_MAGIC			0x6969
+
+/*
+ * These are the default flags for swap requests
+ */
+#define NFS_RPC_SWAPFLAGS		(RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
+
+#define NFS_RW_SYNC		0x0001	/* O_SYNC handling */
+#define NFS_RW_SWAP		0x0002	/* This is a swap request */
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_AGING		0	/* only flush old buffers */
+#define FLUSH_SYNC		1	/* file being synced, or contention */
+#define FLUSH_WAIT		2	/* wait for completion */
+#define FLUSH_STABLE		4	/* commit to stable storage */
+#define FLUSH_LOWPRI		8	/* low priority background flush */
+#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
+
+#ifdef __KERNEL__
+
+/*
+ * NFSv3/v4 Access mode cache entry
+ */
+struct nfs_access_entry {
+	unsigned long		jiffies;
+	struct rpc_cred *	cred;
+	int			mask;
+};
+
+struct nfs4_state;
+struct nfs_open_context {
+	atomic_t count;
+	struct dentry *dentry;
+	struct rpc_cred *cred;
+	struct nfs4_state *state;
+	fl_owner_t lockowner;
+	int mode;
+	int error;
+
+	struct list_head list;
+	wait_queue_head_t waitq;
+};
+
+/*
+ * NFSv4 delegation
+ */
+struct nfs_delegation;
+
+/*
+ * nfs fs inode data in memory
+ */
+struct nfs_inode {
+	/*
+	 * The 64bit 'inode number'
+	 */
+	__u64 fileid;
+
+	/*
+	 * NFS file handle
+	 */
+	struct nfs_fh		fh;
+
+	/*
+	 * Various flags
+	 */
+	unsigned int		flags;
+
+	/*
+	 * read_cache_jiffies is when we started read-caching this inode,
+	 * and read_cache_mtime is the mtime of the inode at that time.
+	 * attrtimeo is for how long the cached information is assumed
+	 * to be valid. A successful attribute revalidation doubles
+	 * attrtimeo (up to acregmax/acdirmax), a failure resets it to
+	 * acregmin/acdirmin.
+	 *
+	 * We need to revalidate the cached attrs for this inode if
+	 *
+	 *	jiffies - read_cache_jiffies > attrtimeo
+	 *
+	 * and invalidate any cached data/flush out any dirty pages if
+	 * we find that
+	 *
+	 *	mtime != read_cache_mtime
+	 */
+	unsigned long		readdir_timestamp;
+	unsigned long		read_cache_jiffies;
+	unsigned long		attrtimeo;
+	unsigned long		attrtimeo_timestamp;
+	__u64			change_attr;		/* v4 only */
+
+	/* "Generation counter" for the attribute cache. This is
+	 * bumped whenever we update the metadata on the
+	 * server.
+	 */
+	unsigned long		cache_change_attribute;
+	/*
+	 * Counter indicating the number of outstanding requests that
+	 * will cause a file data update.
+	 */
+	atomic_t		data_updates;
+
+	struct nfs_access_entry	cache_access;
+
+	/*
+	 * This is the cookie verifier used for NFSv3 readdir
+	 * operations
+	 */
+	__u32			cookieverf[2];
+
+	/*
+	 * This is the list of dirty unwritten pages.
+	 */
+	spinlock_t		req_lock;
+	struct list_head	dirty;
+	struct list_head	commit;
+	struct radix_tree_root	nfs_page_tree;
+
+	unsigned int		ndirty,
+				ncommit,
+				npages;
+
+	/* Open contexts for shared mmap writes */
+	struct list_head	open_files;
+
+	wait_queue_head_t	nfs_i_wait;
+
+#ifdef CONFIG_NFS_V4
+        /* NFSv4 state */
+	struct list_head	open_states;
+	struct nfs_delegation	*delegation;
+	int			 delegation_state;
+	struct rw_semaphore	rwsem;
+#endif /* CONFIG_NFS_V4*/
+
+	struct inode		vfs_inode;
+};
+
+/*
+ * Legal inode flag values
+ */
+#define NFS_INO_STALE		0x0001		/* possible stale inode */
+#define NFS_INO_ADVISE_RDPLUS   0x0002          /* advise readdirplus */
+#define NFS_INO_REVALIDATING	0x0004		/* revalidating attrs */
+#define NFS_INO_INVALID_ATTR	0x0008		/* cached attrs are invalid */
+#define NFS_INO_INVALID_DATA	0x0010		/* cached data is invalid */
+#define NFS_INO_INVALID_ATIME	0x0020		/* cached atime is invalid */
+#define NFS_INO_INVALID_ACCESS	0x0040		/* cached access cred invalid */
+
+static inline struct nfs_inode *NFS_I(struct inode *inode)
+{
+	return container_of(inode, struct nfs_inode, vfs_inode);
+}
+#define NFS_SB(s)		((struct nfs_server *)(s->s_fs_info))
+
+#define NFS_FH(inode)			(&NFS_I(inode)->fh)
+#define NFS_SERVER(inode)		(NFS_SB(inode->i_sb))
+#define NFS_CLIENT(inode)		(NFS_SERVER(inode)->client)
+#define NFS_PROTO(inode)		(NFS_SERVER(inode)->rpc_ops)
+#define NFS_ADDR(inode)			(RPC_PEERADDR(NFS_CLIENT(inode)))
+#define NFS_COOKIEVERF(inode)		(NFS_I(inode)->cookieverf)
+#define NFS_READTIME(inode)		(NFS_I(inode)->read_cache_jiffies)
+#define NFS_CHANGE_ATTR(inode)		(NFS_I(inode)->change_attr)
+#define NFS_ATTRTIMEO(inode)		(NFS_I(inode)->attrtimeo)
+#define NFS_MINATTRTIMEO(inode) \
+	(S_ISDIR(inode->i_mode)? NFS_SERVER(inode)->acdirmin \
+			       : NFS_SERVER(inode)->acregmin)
+#define NFS_MAXATTRTIMEO(inode) \
+	(S_ISDIR(inode->i_mode)? NFS_SERVER(inode)->acdirmax \
+			       : NFS_SERVER(inode)->acregmax)
+#define NFS_ATTRTIMEO_UPDATE(inode)	(NFS_I(inode)->attrtimeo_timestamp)
+
+#define NFS_FLAGS(inode)		(NFS_I(inode)->flags)
+#define NFS_REVALIDATING(inode)		(NFS_FLAGS(inode) & NFS_INO_REVALIDATING)
+#define NFS_STALE(inode)		(NFS_FLAGS(inode) & NFS_INO_STALE)
+
+#define NFS_FILEID(inode)		(NFS_I(inode)->fileid)
+
+static inline int nfs_caches_unstable(struct inode *inode)
+{
+	return atomic_read(&NFS_I(inode)->data_updates) != 0;
+}
+
+static inline void NFS_CACHEINV(struct inode *inode)
+{
+	if (!nfs_caches_unstable(inode))
+		NFS_FLAGS(inode) |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS;
+}
+
+static inline int nfs_server_capable(struct inode *inode, int cap)
+{
+	return NFS_SERVER(inode)->caps & cap;
+}
+
+static inline int NFS_USE_READDIRPLUS(struct inode *inode)
+{
+	return NFS_FLAGS(inode) & NFS_INO_ADVISE_RDPLUS;
+}
+
+/**
+ * nfs_save_change_attribute - Returns the inode attribute change cookie
+ * @inode - pointer to inode
+ * The "change attribute" is updated every time we finish an operation
+ * that will result in a metadata change on the server.
+ */
+static inline long nfs_save_change_attribute(struct inode *inode)
+{
+	return NFS_I(inode)->cache_change_attribute;
+}
+
+/**
+ * nfs_verify_change_attribute - Detects NFS inode cache updates
+ * @inode - pointer to inode
+ * @chattr - previously saved change attribute
+ * Return "false" if metadata has been updated (or is in the process of
+ * being updated) since the change attribute was saved.
+ */
+static inline int nfs_verify_change_attribute(struct inode *inode, unsigned long chattr)
+{
+	return !nfs_caches_unstable(inode)
+		&& chattr == NFS_I(inode)->cache_change_attribute;
+}
+
+/*
+ * linux/fs/nfs/inode.c
+ */
+extern void nfs_zap_caches(struct inode *);
+extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
+				struct nfs_fattr *);
+extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
+extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+extern int nfs_permission(struct inode *, int, struct nameidata *);
+extern int nfs_access_get_cached(struct inode *, struct rpc_cred *, struct nfs_access_entry *);
+extern void nfs_access_add_cache(struct inode *, struct nfs_access_entry *);
+extern int nfs_open(struct inode *, struct file *);
+extern int nfs_release(struct inode *, struct file *);
+extern int nfs_attribute_timeout(struct inode *inode);
+extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode);
+extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *);
+extern int nfs_setattr(struct dentry *, struct iattr *);
+extern void nfs_begin_attr_update(struct inode *);
+extern void nfs_end_attr_update(struct inode *);
+extern void nfs_begin_data_update(struct inode *);
+extern void nfs_end_data_update(struct inode *);
+extern void nfs_end_data_update_defer(struct inode *);
+extern struct nfs_open_context *alloc_nfs_open_context(struct dentry *dentry, struct rpc_cred *cred);
+extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx);
+extern void put_nfs_open_context(struct nfs_open_context *ctx);
+extern void nfs_file_set_open_context(struct file *filp, struct nfs_open_context *ctx);
+extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, int mode);
+extern void nfs_file_clear_open_context(struct file *filp);
+
+/* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */
+extern u32 root_nfs_parse_addr(char *name); /*__init*/
+
+/*
+ * linux/fs/nfs/file.c
+ */
+extern struct inode_operations nfs_file_inode_operations;
+extern struct file_operations nfs_file_operations;
+extern struct address_space_operations nfs_file_aops;
+
+static inline struct rpc_cred *nfs_file_cred(struct file *file)
+{
+	if (file != NULL) {
+		struct nfs_open_context *ctx;
+
+		ctx = (struct nfs_open_context*)file->private_data;
+		return ctx->cred;
+	}
+	return NULL;
+}
+
+/*
+ * linux/fs/nfs/direct.c
+ */
+extern ssize_t nfs_direct_IO(int, struct kiocb *, const struct iovec *, loff_t,
+			unsigned long);
+extern ssize_t nfs_file_direct_read(struct kiocb *iocb, char __user *buf,
+			size_t count, loff_t pos);
+extern ssize_t nfs_file_direct_write(struct kiocb *iocb, const char __user *buf,
+			size_t count, loff_t pos);
+
+/*
+ * linux/fs/nfs/dir.c
+ */
+extern struct inode_operations nfs_dir_inode_operations;
+extern struct file_operations nfs_dir_operations;
+extern struct dentry_operations nfs_dentry_operations;
+
+extern int nfs_instantiate(struct dentry *dentry, struct nfs_fh *fh, struct nfs_fattr *fattr);
+
+/*
+ * linux/fs/nfs/symlink.c
+ */
+extern struct inode_operations nfs_symlink_inode_operations;
+
+/*
+ * linux/fs/nfs/unlink.c
+ */
+extern int  nfs_async_unlink(struct dentry *);
+extern void nfs_complete_unlink(struct dentry *);
+
+/*
+ * linux/fs/nfs/write.c
+ */
+extern int  nfs_writepage(struct page *page, struct writeback_control *wbc);
+extern int  nfs_writepages(struct address_space *, struct writeback_control *);
+extern int  nfs_flush_incompatible(struct file *file, struct page *page);
+extern int  nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
+extern void nfs_writeback_done(struct rpc_task *task);
+
+#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+extern void nfs_commit_done(struct rpc_task *);
+#endif
+
+/*
+ * Try to write back everything synchronously (but check the
+ * return value!)
+ */
+extern int  nfs_sync_inode(struct inode *, unsigned long, unsigned int, int);
+#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+extern int  nfs_commit_inode(struct inode *, unsigned long, unsigned int, int);
+#else
+static inline int
+nfs_commit_inode(struct inode *inode, unsigned long idx_start, unsigned int npages, int how)
+{
+	return 0;
+}
+#endif
+
+static inline int
+nfs_have_writebacks(struct inode *inode)
+{
+	return NFS_I(inode)->npages != 0;
+}
+
+static inline int
+nfs_wb_all(struct inode *inode)
+{
+	int error = nfs_sync_inode(inode, 0, 0, FLUSH_WAIT);
+	return (error < 0) ? error : 0;
+}
+
+/*
+ * Write back all requests on one page - we do this before reading it.
+ */
+static inline int nfs_wb_page_priority(struct inode *inode, struct page* page, int how)
+{
+	int error = nfs_sync_inode(inode, page->index, 1,
+			how | FLUSH_WAIT | FLUSH_STABLE);
+	return (error < 0) ? error : 0;
+}
+
+static inline int nfs_wb_page(struct inode *inode, struct page* page)
+{
+	return nfs_wb_page_priority(inode, page, 0);
+}
+
+/*
+ * Allocate and free nfs_write_data structures
+ */
+extern mempool_t *nfs_wdata_mempool;
+
+static inline struct nfs_write_data *nfs_writedata_alloc(void)
+{
+	struct nfs_write_data *p = mempool_alloc(nfs_wdata_mempool, SLAB_NOFS);
+	if (p) {
+		memset(p, 0, sizeof(*p));
+		INIT_LIST_HEAD(&p->pages);
+	}
+	return p;
+}
+
+static inline void nfs_writedata_free(struct nfs_write_data *p)
+{
+	mempool_free(p, nfs_wdata_mempool);
+}
+
+/* Hack for future NFS swap support */
+#ifndef IS_SWAPFILE
+# define IS_SWAPFILE(inode)	(0)
+#endif
+
+/*
+ * linux/fs/nfs/read.c
+ */
+extern int  nfs_readpage(struct file *, struct page *);
+extern int  nfs_readpages(struct file *, struct address_space *,
+		struct list_head *, unsigned);
+extern void nfs_readpage_result(struct rpc_task *);
+
+/*
+ * Allocate and free nfs_read_data structures
+ */
+extern mempool_t *nfs_rdata_mempool;
+
+static inline struct nfs_read_data *nfs_readdata_alloc(void)
+{
+	struct nfs_read_data *p = mempool_alloc(nfs_rdata_mempool, SLAB_NOFS);
+	if (p)
+		memset(p, 0, sizeof(*p));
+	return p;
+}
+
+static inline void nfs_readdata_free(struct nfs_read_data *p)
+{
+	mempool_free(p, nfs_rdata_mempool);
+}
+
+extern void  nfs_readdata_release(struct rpc_task *task);
+
+/*
+ * linux/fs/mount_clnt.c
+ * (Used only by nfsroot module)
+ */
+extern int  nfsroot_mount(struct sockaddr_in *, char *, struct nfs_fh *,
+		int, int);
+
+/*
+ * inline functions
+ */
+
+static inline loff_t
+nfs_size_to_loff_t(__u64 size)
+{
+	loff_t maxsz = (((loff_t) ULONG_MAX) << PAGE_CACHE_SHIFT) + PAGE_CACHE_SIZE - 1;
+	if (size > maxsz)
+		return maxsz;
+	return (loff_t) size;
+}
+
+static inline ino_t
+nfs_fileid_to_ino_t(u64 fileid)
+{
+	ino_t ino = (ino_t) fileid;
+	if (sizeof(ino_t) < sizeof(u64))
+		ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
+	return ino;
+}
+
+/* NFS root */
+
+extern void * nfs_root_data(void);
+
+#define nfs_wait_event(clnt, wq, condition)				\
+({									\
+	int __retval = 0;						\
+	if (clnt->cl_intr) {						\
+		sigset_t oldmask;					\
+		rpc_clnt_sigmask(clnt, &oldmask);			\
+		__retval = wait_event_interruptible(wq, condition);	\
+		rpc_clnt_sigunmask(clnt, &oldmask);			\
+	} else								\
+		wait_event(wq, condition);				\
+	__retval;							\
+})
+
+#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
+
+#ifdef CONFIG_NFS_V4
+
+struct idmap;
+
+/*
+ * In a seqid-mutating op, this macro controls which error return
+ * values trigger incrementation of the seqid.
+ *
+ * from rfc 3010:
+ * The client MUST monotonically increment the sequence number for the
+ * CLOSE, LOCK, LOCKU, OPEN, OPEN_CONFIRM, and OPEN_DOWNGRADE
+ * operations.  This is true even in the event that the previous
+ * operation that used the sequence number received an error.  The only
+ * exception to this rule is if the previous operation received one of
+ * the following errors: NFSERR_STALE_CLIENTID, NFSERR_STALE_STATEID,
+ * NFSERR_BAD_STATEID, NFSERR_BAD_SEQID, NFSERR_BADXDR,
+ * NFSERR_RESOURCE, NFSERR_NOFILEHANDLE.
+ *
+ */
+#define seqid_mutating_err(err)       \
+(((err) != NFSERR_STALE_CLIENTID) &&  \
+ ((err) != NFSERR_STALE_STATEID)  &&  \
+ ((err) != NFSERR_BAD_STATEID)    &&  \
+ ((err) != NFSERR_BAD_SEQID)      &&  \
+ ((err) != NFSERR_BAD_XDR)        &&  \
+ ((err) != NFSERR_RESOURCE)       &&  \
+ ((err) != NFSERR_NOFILEHANDLE))
+
+enum nfs4_client_state {
+	NFS4CLNT_OK  = 0,
+};
+
+/*
+ * The nfs4_client identifies our client state to the server.
+ */
+struct nfs4_client {
+	struct list_head	cl_servers;	/* Global list of servers */
+	struct in_addr		cl_addr;	/* Server identifier */
+	u64			cl_clientid;	/* constant */
+	nfs4_verifier		cl_confirm;
+	unsigned long		cl_state;
+
+	u32			cl_lockowner_id;
+
+	/*
+	 * The following rwsem ensures exclusive access to the server
+	 * while we recover the state following a lease expiration.
+	 */
+	struct rw_semaphore	cl_sem;
+
+	struct list_head	cl_delegations;
+	struct list_head	cl_state_owners;
+	struct list_head	cl_unused;
+	int			cl_nunused;
+	spinlock_t		cl_lock;
+	atomic_t		cl_count;
+
+	struct rpc_clnt *	cl_rpcclient;
+	struct rpc_cred *	cl_cred;
+
+	struct list_head	cl_superblocks;	/* List of nfs_server structs */
+
+	unsigned long		cl_lease_time;
+	unsigned long		cl_last_renewal;
+	struct work_struct	cl_renewd;
+	struct work_struct	cl_recoverd;
+
+	wait_queue_head_t	cl_waitq;
+	struct rpc_wait_queue	cl_rpcwaitq;
+
+	/* used for the setclientid verifier */
+	struct timespec		cl_boot_time;
+
+	/* idmapper */
+	struct idmap *		cl_idmap;
+
+	/* Our own IP address, as a null-terminated string.
+	 * This is used to generate the clientid, and the callback address.
+	 */
+	char			cl_ipaddr[16];
+	unsigned char		cl_id_uniquifier;
+};
+
+/*
+ * NFS4 state_owners and lock_owners are simply labels for ordered
+ * sequences of RPC calls. Their sole purpose is to provide once-only
+ * semantics by allowing the server to identify replayed requests.
+ *
+ * The ->so_sema is held during all state_owner seqid-mutating operations:
+ * OPEN, OPEN_DOWNGRADE, and CLOSE. Its purpose is to properly serialize
+ * so_seqid.
+ */
+struct nfs4_state_owner {
+	struct list_head     so_list;	 /* per-clientid list of state_owners */
+	struct nfs4_client   *so_client;
+	u32                  so_id;      /* 32-bit identifier, unique */
+	struct semaphore     so_sema;
+	u32                  so_seqid;   /* protected by so_sema */
+	atomic_t	     so_count;
+
+	struct rpc_cred	     *so_cred;	 /* Associated cred */
+	struct list_head     so_states;
+	struct list_head     so_delegations;
+};
+
+/*
+ * struct nfs4_state maintains the client-side state for a given
+ * (state_owner,inode) tuple (OPEN) or state_owner (LOCK).
+ *
+ * OPEN:
+ * In order to know when to OPEN_DOWNGRADE or CLOSE the state on the server,
+ * we need to know how many files are open for reading or writing on a
+ * given inode. This information too is stored here.
+ *
+ * LOCK: one nfs4_state (LOCK) to hold the lock stateid nfs4_state(OPEN)
+ */
+
+struct nfs4_lock_state {
+	struct list_head	ls_locks;	/* Other lock stateids */
+	fl_owner_t		ls_owner;	/* POSIX lock owner */
+#define NFS_LOCK_INITIALIZED 1
+	int			ls_flags;
+	u32			ls_seqid;
+	u32			ls_id;
+	nfs4_stateid		ls_stateid;
+	atomic_t		ls_count;
+};
+
+/* bits for nfs4_state->flags */
+enum {
+	LK_STATE_IN_USE,
+	NFS_DELEGATED_STATE,
+};
+
+struct nfs4_state {
+	struct list_head open_states;	/* List of states for the same state_owner */
+	struct list_head inode_states;	/* List of states for the same inode */
+	struct list_head lock_states;	/* List of subservient lock stateids */
+
+	struct nfs4_state_owner *owner;	/* Pointer to the open owner */
+	struct inode *inode;		/* Pointer to the inode */
+
+	unsigned long flags;		/* Do we hold any locks? */
+	struct semaphore lock_sema;	/* Serializes file locking operations */
+	rwlock_t state_lock;		/* Protects the lock_states list */
+
+	nfs4_stateid stateid;
+
+	unsigned int nreaders;
+	unsigned int nwriters;
+	int state;			/* State on the server (R,W, or RW) */
+	atomic_t count;
+};
+
+
+struct nfs4_exception {
+	long timeout;
+	int retry;
+};
+
+struct nfs4_state_recovery_ops {
+	int (*recover_open)(struct nfs4_state_owner *, struct nfs4_state *);
+	int (*recover_lock)(struct nfs4_state *, struct file_lock *);
+};
+
+extern struct dentry_operations nfs4_dentry_operations;
+extern struct inode_operations nfs4_dir_inode_operations;
+
+/* nfs4proc.c */
+extern int nfs4_map_errors(int err);
+extern int nfs4_proc_setclientid(struct nfs4_client *, u32, unsigned short);
+extern int nfs4_proc_setclientid_confirm(struct nfs4_client *);
+extern int nfs4_proc_async_renew(struct nfs4_client *);
+extern int nfs4_proc_renew(struct nfs4_client *);
+extern int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode);
+extern struct inode *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *);
+extern int nfs4_open_revalidate(struct inode *, struct dentry *, int);
+
+extern struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops;
+extern struct nfs4_state_recovery_ops nfs4_network_partition_recovery_ops;
+
+/* nfs4renewd.c */
+extern void nfs4_schedule_state_renewal(struct nfs4_client *);
+extern void nfs4_renewd_prepare_shutdown(struct nfs_server *);
+extern void nfs4_kill_renewd(struct nfs4_client *);
+
+/* nfs4state.c */
+extern void init_nfsv4_state(struct nfs_server *);
+extern void destroy_nfsv4_state(struct nfs_server *);
+extern struct nfs4_client *nfs4_get_client(struct in_addr *);
+extern void nfs4_put_client(struct nfs4_client *clp);
+extern int nfs4_init_client(struct nfs4_client *clp);
+extern struct nfs4_client *nfs4_find_client(struct in_addr *);
+extern u32 nfs4_alloc_lockowner_id(struct nfs4_client *);
+
+extern struct nfs4_state_owner * nfs4_get_state_owner(struct nfs_server *, struct rpc_cred *);
+extern void nfs4_put_state_owner(struct nfs4_state_owner *);
+extern void nfs4_drop_state_owner(struct nfs4_state_owner *);
+extern struct nfs4_state * nfs4_get_open_state(struct inode *, struct nfs4_state_owner *);
+extern void nfs4_put_open_state(struct nfs4_state *);
+extern void nfs4_close_state(struct nfs4_state *, mode_t);
+extern struct nfs4_state *nfs4_find_state(struct inode *, struct rpc_cred *, mode_t mode);
+extern void nfs4_increment_seqid(int status, struct nfs4_state_owner *sp);
+extern void nfs4_schedule_state_recovery(struct nfs4_client *);
+extern struct nfs4_lock_state *nfs4_find_lock_state(struct nfs4_state *state, fl_owner_t);
+extern struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_owner_t);
+extern void nfs4_put_lock_state(struct nfs4_lock_state *state);
+extern void nfs4_increment_lock_seqid(int status, struct nfs4_lock_state *ls);
+extern void nfs4_notify_setlk(struct nfs4_state *, struct file_lock *, struct nfs4_lock_state *);
+extern void nfs4_notify_unlck(struct nfs4_state *, struct file_lock *, struct nfs4_lock_state *);
+extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t);
+
+
+
+struct nfs4_mount_data;
+#else
+#define init_nfsv4_state(server)  do { } while (0)
+#define destroy_nfsv4_state(server)       do { } while (0)
+#define nfs4_put_state_owner(inode, owner) do { } while (0)
+#define nfs4_put_open_state(state) do { } while (0)
+#define nfs4_close_state(a, b) do { } while (0)
+#define nfs4_renewd_prepare_shutdown(server) do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS		0x0001
+#define NFSDBG_DIRCACHE		0x0002
+#define NFSDBG_LOOKUPCACHE	0x0004
+#define NFSDBG_PAGECACHE	0x0008
+#define NFSDBG_PROC		0x0010
+#define NFSDBG_XDR		0x0020
+#define NFSDBG_FILE		0x0040
+#define NFSDBG_ROOT		0x0080
+#define NFSDBG_CALLBACK		0x0100
+#define NFSDBG_ALL		0xFFFF
+
+#ifdef __KERNEL__
+# undef ifdebug
+# ifdef NFS_DEBUG
+#  define ifdebug(fac)		if (unlikely(nfs_debug & NFSDBG_##fac))
+# else
+#  define ifdebug(fac)		if (0)
+# endif
+#endif /* __KERNEL */
+
+#endif
diff --git a/include/linux/nfs_fs_i.h b/include/linux/nfs_fs_i.h
new file mode 100644
index 000000000000..e9a749588a7b
--- /dev/null
+++ b/include/linux/nfs_fs_i.h
@@ -0,0 +1,25 @@
+#ifndef _NFS_FS_I
+#define _NFS_FS_I
+
+#include <asm/types.h>
+#include <linux/list.h>
+#include <linux/nfs.h>
+
+struct nlm_lockowner;
+
+/*
+ * NFS lock info
+ */
+struct nfs_lock_info {
+	u32		state;
+	u32		flags;
+	struct nlm_lockowner *owner;
+};
+
+/*
+ * Lock flag values
+ */
+#define NFS_LCK_GRANTED		0x0001		/* lock has been granted */
+#define NFS_LCK_RECLAIM		0x0002		/* lock marked for reclaiming */
+
+#endif
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
new file mode 100644
index 000000000000..fc51645d61ee
--- /dev/null
+++ b/include/linux/nfs_fs_sb.h
@@ -0,0 +1,58 @@
+#ifndef _NFS_FS_SB
+#define _NFS_FS_SB
+
+#include <linux/list.h>
+#include <linux/backing-dev.h>
+
+/*
+ * NFS client parameters stored in the superblock.
+ */
+struct nfs_server {
+	struct rpc_clnt *	client;		/* RPC client handle */
+	struct rpc_clnt *	client_sys;	/* 2nd handle for FSINFO */
+	struct nfs_rpc_ops *	rpc_ops;	/* NFS protocol vector */
+	struct backing_dev_info	backing_dev_info;
+	int			flags;		/* various flags */
+	unsigned int		caps;		/* server capabilities */
+	unsigned int		rsize;		/* read size */
+	unsigned int		rpages;		/* read size (in pages) */
+	unsigned int		wsize;		/* write size */
+	unsigned int		wpages;		/* write size (in pages) */
+	unsigned int		wtmult;		/* server disk block size */
+	unsigned int		dtsize;		/* readdir size */
+	unsigned int		bsize;		/* server block size */
+	unsigned int		acregmin;	/* attr cache timeouts */
+	unsigned int		acregmax;
+	unsigned int		acdirmin;
+	unsigned int		acdirmax;
+	unsigned int		namelen;
+	char *			hostname;	/* remote hostname */
+	struct nfs_fh		fh;
+	struct sockaddr_in	addr;
+#ifdef CONFIG_NFS_V4
+	/* Our own IP address, as a null-terminated string.
+	 * This is used to generate the clientid, and the callback address.
+	 */
+	char			ip_addr[16];
+	char *			mnt_path;
+	struct nfs4_client *	nfs4_state;	/* all NFSv4 state starts here */
+	struct list_head	nfs4_siblings;	/* List of other nfs_server structs
+						 * that share the same clientid
+						 */
+	u32			attr_bitmask[2];/* V4 bitmask representing the set
+						   of attributes supported on this
+						   filesystem */
+	u32			acl_bitmask;	/* V4 bitmask representing the ACEs
+						   that are supported on this
+						   filesystem */
+#endif
+};
+
+/* Server capabilities */
+#define NFS_CAP_READDIRPLUS	(1U << 0)
+#define NFS_CAP_HARDLINKS	(1U << 1)
+#define NFS_CAP_SYMLINKS	(1U << 2)
+#define NFS_CAP_ACLS		(1U << 3)
+#define NFS_CAP_ATOMIC_OPEN	(1U << 4)
+
+#endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
new file mode 100644
index 000000000000..a0f1f25e0ead
--- /dev/null
+++ b/include/linux/nfs_idmap.h
@@ -0,0 +1,76 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ *  UID and GID to name mapping for clients.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef NFS_IDMAP_H
+#define NFS_IDMAP_H
+
+/* XXX from bits/utmp.h  */
+#define IDMAP_NAMESZ  128
+
+#define IDMAP_TYPE_USER  0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN      0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS    0x08
+
+struct idmap_msg {
+	__u8  im_type;
+	__u8  im_conv;
+	char  im_name[IDMAP_NAMESZ];
+	__u32 im_id;
+	__u8  im_status;
+};
+
+#ifdef __KERNEL__
+
+/* Forward declaration to make this header independent of others */
+struct nfs4_client;
+
+void nfs_idmap_new(struct nfs4_client *);
+void nfs_idmap_delete(struct nfs4_client *);
+
+int nfs_map_name_to_uid(struct nfs4_client *, const char *, size_t, __u32 *);
+int nfs_map_group_to_gid(struct nfs4_client *, const char *, size_t, __u32 *);
+int nfs_map_uid_to_name(struct nfs4_client *, __u32, char *);
+int nfs_map_gid_to_group(struct nfs4_client *, __u32, char *);
+#endif /* __KERNEL__ */
+
+#endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h
new file mode 100644
index 000000000000..0071428231f9
--- /dev/null
+++ b/include/linux/nfs_mount.h
@@ -0,0 +1,65 @@
+#ifndef _LINUX_NFS_MOUNT_H
+#define _LINUX_NFS_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs_mount.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  structure passed from user-space to kernel-space during an nfs mount
+ */
+#include <linux/in.h>
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS_MOUNT_VERSION	6
+#define NFS_MAX_CONTEXT_LEN	256
+
+struct nfs_mount_data {
+	int		version;		/* 1 */
+	int		fd;			/* 1 */
+	struct nfs2_fh	old_root;		/* 1 */
+	int		flags;			/* 1 */
+	int		rsize;			/* 1 */
+	int		wsize;			/* 1 */
+	int		timeo;			/* 1 */
+	int		retrans;		/* 1 */
+	int		acregmin;		/* 1 */
+	int		acregmax;		/* 1 */
+	int		acdirmin;		/* 1 */
+	int		acdirmax;		/* 1 */
+	struct sockaddr_in addr;		/* 1 */
+	char		hostname[256];		/* 1 */
+	int		namlen;			/* 2 */
+	unsigned int	bsize;			/* 3 */
+	struct nfs3_fh	root;			/* 4 */
+	int		pseudoflavor;		/* 5 */
+	char		context[NFS_MAX_CONTEXT_LEN + 1];	/* 6 */
+};
+
+/* bits in the flags field */
+
+#define NFS_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS_MOUNT_INTR		0x0002	/* 1 */
+#define NFS_MOUNT_SECURE	0x0004	/* 1 */
+#define NFS_MOUNT_POSIX		0x0008	/* 1 */
+#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
+#define NFS_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS_MOUNT_TCP		0x0040	/* 2 */
+#define NFS_MOUNT_VER3		0x0080	/* 3 */
+#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
+#define NFS_MOUNT_NONLM		0x0200	/* 3 */
+#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
+#define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
+#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
+#define NFS_MOUNT_FLAGMASK	0xFFFF
+
+#endif
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
new file mode 100644
index 000000000000..39e4895bcdb4
--- /dev/null
+++ b/include/linux/nfs_page.h
@@ -0,0 +1,151 @@
+/*
+ * linux/include/linux/nfs_page.h
+ *
+ * Copyright (C) 2000 Trond Myklebust
+ *
+ * NFS page cache wrapper.
+ */
+
+#ifndef _LINUX_NFS_PAGE_H
+#define _LINUX_NFS_PAGE_H
+
+
+#include <linux/list.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <linux/nfs_fs_sb.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/nfs_xdr.h>
+
+#include <asm/atomic.h>
+
+/*
+ * Valid flags for a dirty buffer
+ */
+#define PG_BUSY			0
+#define PG_NEED_COMMIT		1
+#define PG_NEED_RESCHED		2
+
+struct nfs_page {
+	struct list_head	wb_list,	/* Defines state of page: */
+				*wb_list_head;	/*      read/write/commit */
+	struct page		*wb_page;	/* page to read in/write out */
+	struct nfs_open_context	*wb_context;	/* File state context info */
+	atomic_t		wb_complete;	/* i/os we're waiting for */
+	unsigned long		wb_index;	/* Offset >> PAGE_CACHE_SHIFT */
+	unsigned int		wb_offset,	/* Offset & ~PAGE_CACHE_MASK */
+				wb_pgbase,	/* Start of page data */
+				wb_bytes;	/* Length of request */
+	atomic_t		wb_count;	/* reference count */
+	unsigned long		wb_flags;
+	struct nfs_writeverf	wb_verf;	/* Commit cookie */
+};
+
+#define NFS_WBACK_BUSY(req)	(test_bit(PG_BUSY,&(req)->wb_flags))
+#define NFS_NEED_COMMIT(req)	(test_bit(PG_NEED_COMMIT,&(req)->wb_flags))
+#define NFS_NEED_RESCHED(req)	(test_bit(PG_NEED_RESCHED,&(req)->wb_flags))
+
+extern	struct nfs_page *nfs_create_request(struct nfs_open_context *ctx,
+					    struct inode *inode,
+					    struct page *page,
+					    unsigned int offset,
+					    unsigned int count);
+extern	void nfs_clear_request(struct nfs_page *req);
+extern	void nfs_release_request(struct nfs_page *req);
+
+
+extern	void nfs_list_add_request(struct nfs_page *, struct list_head *);
+
+extern	int nfs_scan_list(struct list_head *, struct list_head *,
+			  unsigned long, unsigned int);
+extern	int nfs_coalesce_requests(struct list_head *, struct list_head *,
+				  unsigned int);
+extern  int nfs_wait_on_request(struct nfs_page *);
+extern	void nfs_unlock_request(struct nfs_page *req);
+
+/*
+ * Lock the page of an asynchronous request without incrementing the wb_count
+ */
+static inline int
+nfs_lock_request_dontget(struct nfs_page *req)
+{
+	if (test_and_set_bit(PG_BUSY, &req->wb_flags))
+		return 0;
+	return 1;
+}
+
+/*
+ * Lock the page of an asynchronous request
+ */
+static inline int
+nfs_lock_request(struct nfs_page *req)
+{
+	if (test_and_set_bit(PG_BUSY, &req->wb_flags))
+		return 0;
+	atomic_inc(&req->wb_count);
+	return 1;
+}
+
+
+/**
+ * nfs_list_remove_request - Remove a request from its wb_list
+ * @req: request
+ */
+static inline void
+nfs_list_remove_request(struct nfs_page *req)
+{
+	if (list_empty(&req->wb_list))
+		return;
+	if (!NFS_WBACK_BUSY(req)) {
+		printk(KERN_ERR "NFS: unlocked request attempted removed from list!\n");
+		BUG();
+	}
+	list_del_init(&req->wb_list);
+	req->wb_list_head = NULL;
+}
+
+static inline int
+nfs_defer_commit(struct nfs_page *req)
+{
+	if (test_and_set_bit(PG_NEED_COMMIT, &req->wb_flags))
+		return 0;
+	return 1;
+}
+
+static inline void
+nfs_clear_commit(struct nfs_page *req)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(PG_NEED_COMMIT, &req->wb_flags);
+	smp_mb__after_clear_bit();
+}
+
+static inline int
+nfs_defer_reschedule(struct nfs_page *req)
+{
+	if (test_and_set_bit(PG_NEED_RESCHED, &req->wb_flags))
+		return 0;
+	return 1;
+}
+
+static inline void
+nfs_clear_reschedule(struct nfs_page *req)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(PG_NEED_RESCHED, &req->wb_flags);
+	smp_mb__after_clear_bit();
+}
+
+static inline struct nfs_page *
+nfs_list_entry(struct list_head *head)
+{
+	return list_entry(head, struct nfs_page, wb_list);
+}
+
+static inline
+loff_t req_offset(struct nfs_page *req)
+{
+	return (((loff_t)req->wb_index) << PAGE_CACHE_SHIFT) + req->wb_offset;
+}
+
+#endif /* _LINUX_NFS_PAGE_H */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
new file mode 100644
index 000000000000..47037d9521cb
--- /dev/null
+++ b/include/linux/nfs_xdr.h
@@ -0,0 +1,735 @@
+#ifndef _LINUX_NFS_XDR_H
+#define _LINUX_NFS_XDR_H
+
+#include <linux/sunrpc/xprt.h>
+
+struct nfs4_fsid {
+	__u64 major;
+	__u64 minor;
+};
+
+struct nfs_fattr {
+	unsigned short		valid;		/* which fields are valid */
+	__u64			pre_size;	/* pre_op_attr.size	  */
+	struct timespec		pre_mtime;	/* pre_op_attr.mtime	  */
+	struct timespec		pre_ctime;	/* pre_op_attr.ctime	  */
+	enum nfs_ftype		type;		/* always use NFSv2 types */
+	__u32			mode;
+	__u32			nlink;
+	__u32			uid;
+	__u32			gid;
+	__u64			size;
+	union {
+		struct {
+			__u32	blocksize;
+			__u32	blocks;
+		} nfs2;
+		struct {
+			__u64	used;
+		} nfs3;
+	} du;
+	dev_t			rdev;
+	union {
+		__u64		nfs3;		/* also nfs2 */
+		struct nfs4_fsid nfs4;
+	} fsid_u;
+	__u64			fileid;
+	struct timespec		atime;
+	struct timespec		mtime;
+	struct timespec		ctime;
+	__u32			bitmap[2];	/* NFSv4 returned attribute bitmap */
+	__u64			change_attr;	/* NFSv4 change attribute */
+	__u64			pre_change_attr;/* pre-op NFSv4 change attribute */
+	unsigned long		timestamp;
+};
+
+#define NFS_ATTR_WCC		0x0001		/* pre-op WCC data    */
+#define NFS_ATTR_FATTR		0x0002		/* post-op attributes */
+#define NFS_ATTR_FATTR_V3	0x0004		/* NFSv3 attributes */
+#define NFS_ATTR_FATTR_V4	0x0008
+#define NFS_ATTR_PRE_CHANGE	0x0010
+
+/*
+ * Info on the file system
+ */
+struct nfs_fsinfo {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u32			rtmax;	/* max.  read transfer size */
+	__u32			rtpref;	/* pref. read transfer size */
+	__u32			rtmult;	/* reads should be multiple of this */
+	__u32			wtmax;	/* max.  write transfer size */
+	__u32			wtpref;	/* pref. write transfer size */
+	__u32			wtmult;	/* writes should be multiple of this */
+	__u32			dtpref;	/* pref. readdir transfer size */
+	__u64			maxfilesize;
+	__u32			lease_time; /* in seconds */
+};
+
+struct nfs_fsstat {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u64			tbytes;	/* total size in bytes */
+	__u64			fbytes;	/* # of free bytes */
+	__u64			abytes;	/* # of bytes available to user */
+	__u64			tfiles;	/* # of files */
+	__u64			ffiles;	/* # of free files */
+	__u64			afiles;	/* # of files available to user */
+};
+
+struct nfs2_fsstat {
+	__u32			tsize;  /* Server transfer size */
+	__u32			bsize;  /* Filesystem block size */
+	__u32			blocks; /* No. of "bsize" blocks on filesystem */
+	__u32			bfree;  /* No. of free "bsize" blocks */
+	__u32			bavail; /* No. of available "bsize" blocks */
+};
+
+struct nfs_pathconf {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u32			max_link; /* max # of hard links */
+	__u32			max_namelen; /* max name length */
+};
+
+struct nfs4_change_info {
+	u32			atomic;
+	u64			before;
+	u64			after;
+};
+
+/*
+ * Arguments to the open call.
+ */
+struct nfs_openargs {
+	const struct nfs_fh *	fh;
+	__u32                   seqid;
+	int			open_flags;
+	__u64                   clientid;
+	__u32                   id;
+	union {
+		struct iattr *  attrs;    /* UNCHECKED, GUARDED */
+		nfs4_verifier   verifier; /* EXCLUSIVE */
+		nfs4_stateid	delegation;		/* CLAIM_DELEGATE_CUR */
+		int		delegation_type;	/* CLAIM_PREVIOUS */
+	} u;
+	const struct qstr *	name;
+	const struct nfs_server *server;	 /* Needed for ID mapping */
+	const u32 *		bitmask;
+	__u32			claim;
+};
+
+struct nfs_openres {
+	nfs4_stateid            stateid;
+	struct nfs_fh           fh;
+	struct nfs4_change_info	cinfo;
+	__u32                   rflags;
+	struct nfs_fattr *      f_attr;
+	const struct nfs_server *server;
+	int			delegation_type;
+	nfs4_stateid		delegation;
+	__u32			do_recall;
+	__u64			maxsize;
+};
+
+/*
+ * Arguments to the open_confirm call.
+ */
+struct nfs_open_confirmargs {
+	const struct nfs_fh *	fh;
+	nfs4_stateid            stateid;
+	__u32                   seqid;
+};
+
+struct nfs_open_confirmres {
+	nfs4_stateid            stateid;
+};
+
+/*
+ * Arguments to the close call.
+ */
+struct nfs_closeargs {
+	struct nfs_fh *         fh;
+	nfs4_stateid            stateid;
+	__u32                   seqid;
+	int			open_flags;
+};
+
+struct nfs_closeres {
+	nfs4_stateid            stateid;
+};
+/*
+ *  * Arguments to the lock,lockt, and locku call.
+ *   */
+struct nfs_lowner {
+	__u64           clientid;
+	u32                     id;
+};
+
+struct nfs_open_to_lock {
+	__u32                   open_seqid;
+	nfs4_stateid            open_stateid;
+	__u32                   lock_seqid;
+	struct nfs_lowner       lock_owner;
+};
+
+struct nfs_exist_lock {
+	nfs4_stateid            stateid;
+	__u32                   seqid;
+};
+
+struct nfs_lock_opargs {
+	__u32                   reclaim;
+	__u32                   new_lock_owner;
+	union {
+		struct nfs_open_to_lock *open_lock;
+		struct nfs_exist_lock   *exist_lock;
+	} u;
+};
+
+struct nfs_locku_opargs {
+	__u32                   seqid;
+	nfs4_stateid            stateid;
+};
+
+struct nfs_lockargs {
+	struct nfs_fh *         fh;
+	__u32                   type;
+	__u64                   offset; 
+	__u64                   length; 
+	union {
+		struct nfs_lock_opargs  *lock;    /* LOCK  */
+		struct nfs_lowner       *lockt;  /* LOCKT */
+		struct nfs_locku_opargs *locku;  /* LOCKU */
+	} u;
+};
+
+struct nfs_lock_denied {
+	__u64                   offset;
+	__u64                   length;
+	__u32                   type;
+	struct nfs_lowner   	owner;
+};
+
+struct nfs_lockres {
+	union {
+		nfs4_stateid            stateid;/* LOCK success, LOCKU */
+		struct nfs_lock_denied  denied; /* LOCK failed, LOCKT success */
+	} u;
+	const struct nfs_server *	server;
+};
+
+struct nfs4_delegreturnargs {
+	const struct nfs_fh *fhandle;
+	const nfs4_stateid *stateid;
+};
+
+/*
+ * Arguments to the read call.
+ */
+
+#define NFS_READ_MAXIOV		(9U)
+#if (NFS_READ_MAXIOV > (MAX_IOVEC -2))
+#error "NFS_READ_MAXIOV is too large"
+#endif
+
+struct nfs_readargs {
+	struct nfs_fh *		fh;
+	struct nfs_open_context *context;
+	__u64			offset;
+	__u32			count;
+	unsigned int		pgbase;
+	struct page **		pages;
+};
+
+struct nfs_readres {
+	struct nfs_fattr *	fattr;
+	__u32			count;
+	int                     eof;
+};
+
+/*
+ * Arguments to the write call.
+ */
+#define NFS_WRITE_MAXIOV	(9U)
+#if (NFS_WRITE_MAXIOV > (MAX_IOVEC -2))
+#error "NFS_WRITE_MAXIOV is too large"
+#endif
+
+struct nfs_writeargs {
+	struct nfs_fh *		fh;
+	struct nfs_open_context *context;
+	__u64			offset;
+	__u32			count;
+	enum nfs3_stable_how	stable;
+	unsigned int		pgbase;
+	struct page **		pages;
+};
+
+struct nfs_writeverf {
+	enum nfs3_stable_how	committed;
+	__u32			verifier[2];
+};
+
+struct nfs_writeres {
+	struct nfs_fattr *	fattr;
+	struct nfs_writeverf *	verf;
+	__u32			count;
+};
+
+/*
+ * Argument struct for decode_entry function
+ */
+struct nfs_entry {
+	__u64			ino;
+	__u64			cookie,
+				prev_cookie;
+	const char *		name;
+	unsigned int		len;
+	int			eof;
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+};
+
+/*
+ * The following types are for NFSv2 only.
+ */
+struct nfs_sattrargs {
+	struct nfs_fh *		fh;
+	struct iattr *		sattr;
+};
+
+struct nfs_diropargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+};
+
+struct nfs_createargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+};
+
+struct nfs_renameargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs_setattrargs {
+	struct nfs_fh *                 fh;
+	nfs4_stateid                    stateid;
+	struct iattr *                  iap;
+	const struct nfs_server *	server; /* Needed for name mapping */
+	const u32 *			bitmask;
+};
+
+struct nfs_setattrres {
+	struct nfs_fattr *              fattr;
+	const struct nfs_server *	server;
+};
+
+struct nfs_linkargs {
+	struct nfs_fh *		fromfh;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs_symlinkargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	const char *		topath;
+	unsigned int		tolen;
+	struct iattr *		sattr;
+};
+
+struct nfs_readdirargs {
+	struct nfs_fh *		fh;
+	__u32			cookie;
+	unsigned int		count;
+	struct page **		pages;
+};
+
+struct nfs_diropok {
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs_readlinkargs {
+	struct nfs_fh *		fh;
+	unsigned int		pgbase;
+	unsigned int		pglen;
+	struct page **		pages;
+};
+
+struct nfs3_sattrargs {
+	struct nfs_fh *		fh;
+	struct iattr *		sattr;
+	unsigned int		guard;
+	struct timespec		guardtime;
+};
+
+struct nfs3_diropargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+};
+
+struct nfs3_accessargs {
+	struct nfs_fh *		fh;
+	__u32			access;
+};
+
+struct nfs3_createargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+	enum nfs3_createmode	createmode;
+	__u32			verifier[2];
+};
+
+struct nfs3_mkdirargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+};
+
+struct nfs3_symlinkargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	const char *		topath;
+	unsigned int		tolen;
+	struct iattr *		sattr;
+};
+
+struct nfs3_mknodargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	enum nfs3_ftype		type;
+	struct iattr *		sattr;
+	dev_t			rdev;
+};
+
+struct nfs3_renameargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs3_linkargs {
+	struct nfs_fh *		fromfh;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs3_readdirargs {
+	struct nfs_fh *		fh;
+	__u64			cookie;
+	__u32			verf[2];
+	int			plus;
+	unsigned int            count;
+	struct page **		pages;
+};
+
+struct nfs3_diropres {
+	struct nfs_fattr *	dir_attr;
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs3_accessres {
+	struct nfs_fattr *	fattr;
+	__u32			access;
+};
+
+struct nfs3_readlinkargs {
+	struct nfs_fh *		fh;
+	unsigned int		pgbase;
+	unsigned int		pglen;
+	struct page **		pages;
+};
+
+struct nfs3_renameres {
+	struct nfs_fattr *	fromattr;
+	struct nfs_fattr *	toattr;
+};
+
+struct nfs3_linkres {
+	struct nfs_fattr *	dir_attr;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs3_readdirres {
+	struct nfs_fattr *	dir_attr;
+	__u32 *			verf;
+	int			plus;
+};
+
+#ifdef CONFIG_NFS_V4
+
+typedef u64 clientid4;
+
+struct nfs4_accessargs {
+	const struct nfs_fh *		fh;
+	u32				access;
+};
+
+struct nfs4_accessres {
+	u32				supported;
+	u32				access;
+};
+
+struct nfs4_create_arg {
+	u32				ftype;
+	union {
+		struct qstr *		symlink;    /* NF4LNK */
+		struct {
+			u32		specdata1;
+			u32		specdata2;
+		} device;    /* NF4BLK, NF4CHR */
+	} u;
+	const struct qstr *		name;
+	const struct nfs_server *	server;
+	const struct iattr *		attrs;
+	const struct nfs_fh *		dir_fh;
+	const u32 *			bitmask;
+};
+
+struct nfs4_create_res {
+	const struct nfs_server *	server;
+	struct nfs_fh *			fh;
+	struct nfs_fattr *		fattr;
+	struct nfs4_change_info		dir_cinfo;
+};
+
+struct nfs4_fsinfo_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+};
+
+struct nfs4_getattr_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+};
+
+struct nfs4_getattr_res {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+};
+
+struct nfs4_link_arg {
+	const struct nfs_fh *		fh;
+	const struct nfs_fh *		dir_fh;
+	const struct qstr *		name;
+};
+
+struct nfs4_lookup_arg {
+	const struct nfs_fh *		dir_fh;
+	const struct qstr *		name;
+	const u32 *			bitmask;
+};
+
+struct nfs4_lookup_res {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+	struct nfs_fh *			fh;
+};
+
+struct nfs4_lookup_root_arg {
+	const u32 *			bitmask;
+};
+
+struct nfs4_pathconf_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+};
+
+struct nfs4_readdir_arg {
+	const struct nfs_fh *		fh;
+	u64				cookie;
+	nfs4_verifier			verifier;
+	u32				count;
+	struct page **			pages;	/* zero-copy data */
+	unsigned int			pgbase;	/* zero-copy data */
+	const u32 *			bitmask;
+};
+
+struct nfs4_readdir_res {
+	nfs4_verifier			verifier;
+	unsigned int			pgbase;
+};
+
+struct nfs4_readlink {
+	const struct nfs_fh *		fh;
+	unsigned int			pgbase;
+	unsigned int			pglen;   /* zero-copy data */
+	struct page **			pages;   /* zero-copy data */
+};
+
+struct nfs4_remove_arg {
+	const struct nfs_fh *		fh;
+	const struct qstr *		name;
+};
+
+struct nfs4_rename_arg {
+	const struct nfs_fh *		old_dir;
+	const struct nfs_fh *		new_dir;
+	const struct qstr *		old_name;
+	const struct qstr *		new_name;
+};
+
+struct nfs4_rename_res {
+	struct nfs4_change_info		old_cinfo;
+	struct nfs4_change_info		new_cinfo;
+};
+
+struct nfs4_setclientid {
+	const nfs4_verifier *		sc_verifier;      /* request */
+	unsigned int			sc_name_len;
+	char				sc_name[32];	  /* request */
+	u32				sc_prog;          /* request */
+	unsigned int			sc_netid_len;
+	char				sc_netid[4];	  /* request */
+	unsigned int			sc_uaddr_len;
+	char				sc_uaddr[24];     /* request */
+	u32				sc_cb_ident;      /* request */
+};
+
+struct nfs4_statfs_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+};
+
+struct nfs4_server_caps_res {
+	u32				attr_bitmask[2];
+	u32				acl_bitmask;
+	u32				has_links;
+	u32				has_symlinks;
+};
+
+#endif /* CONFIG_NFS_V4 */
+
+struct nfs_page;
+
+struct nfs_read_data {
+	int			flags;
+	struct rpc_task		task;
+	struct inode		*inode;
+	struct rpc_cred		*cred;
+	struct nfs_fattr	fattr;	/* fattr storage */
+	struct list_head	pages;	/* Coalesced read requests */
+	struct nfs_page		*req;	/* multi ops per nfs_page */
+	struct page		*pagevec[NFS_READ_MAXIOV];
+	struct nfs_readargs args;
+	struct nfs_readres  res;
+#ifdef CONFIG_NFS_V4
+	unsigned long		timestamp;	/* For lease renewal */
+#endif
+	void (*complete) (struct nfs_read_data *, int);
+};
+
+struct nfs_write_data {
+	int			flags;
+	struct rpc_task		task;
+	struct inode		*inode;
+	struct rpc_cred		*cred;
+	struct nfs_fattr	fattr;
+	struct nfs_writeverf	verf;
+	struct list_head	pages;		/* Coalesced requests we wish to flush */
+	struct nfs_page		*req;		/* multi ops per nfs_page */
+	struct page		*pagevec[NFS_WRITE_MAXIOV];
+	struct nfs_writeargs	args;		/* argument struct */
+	struct nfs_writeres	res;		/* result struct */
+#ifdef CONFIG_NFS_V4
+	unsigned long		timestamp;	/* For lease renewal */
+#endif
+	void (*complete) (struct nfs_write_data *, int);
+};
+
+struct nfs_access_entry;
+
+/*
+ * RPC procedure vector for NFSv2/NFSv3 demuxing
+ */
+struct nfs_rpc_ops {
+	int	version;		/* Protocol version */
+	struct dentry_operations *dentry_ops;
+	struct inode_operations *dir_inode_ops;
+
+	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsinfo *);
+	int	(*getattr) (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fattr *);
+	int	(*setattr) (struct dentry *, struct nfs_fattr *,
+			    struct iattr *);
+	int	(*lookup)  (struct inode *, struct qstr *,
+			    struct nfs_fh *, struct nfs_fattr *);
+	int	(*access)  (struct inode *, struct nfs_access_entry *);
+	int	(*readlink)(struct inode *, struct page *, unsigned int,
+			    unsigned int);
+	int	(*read)    (struct nfs_read_data *);
+	int	(*write)   (struct nfs_write_data *);
+	int	(*commit)  (struct nfs_write_data *);
+	int	(*create)  (struct inode *, struct dentry *,
+			    struct iattr *, int);
+	int	(*remove)  (struct inode *, struct qstr *);
+	int	(*unlink_setup)  (struct rpc_message *,
+			    struct dentry *, struct qstr *);
+	int	(*unlink_done) (struct dentry *, struct rpc_task *);
+	int	(*rename)  (struct inode *, struct qstr *,
+			    struct inode *, struct qstr *);
+	int	(*link)    (struct inode *, struct inode *, struct qstr *);
+	int	(*symlink) (struct inode *, struct qstr *, struct qstr *,
+			    struct iattr *, struct nfs_fh *,
+			    struct nfs_fattr *);
+	int	(*mkdir)   (struct inode *, struct dentry *, struct iattr *);
+	int	(*rmdir)   (struct inode *, struct qstr *);
+	int	(*readdir) (struct dentry *, struct rpc_cred *,
+			    u64, struct page *, unsigned int, int);
+	int	(*mknod)   (struct inode *, struct dentry *, struct iattr *,
+			    dev_t);
+	int	(*statfs)  (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsstat *);
+	int	(*fsinfo)  (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsinfo *);
+	int	(*pathconf) (struct nfs_server *, struct nfs_fh *,
+			     struct nfs_pathconf *);
+	u32 *	(*decode_dirent)(u32 *, struct nfs_entry *, int plus);
+	void	(*read_setup)   (struct nfs_read_data *);
+	void	(*write_setup)  (struct nfs_write_data *, int how);
+	void	(*commit_setup) (struct nfs_write_data *, int how);
+	int	(*file_open)   (struct inode *, struct file *);
+	int	(*file_release) (struct inode *, struct file *);
+	int	(*lock)(struct file *, int, struct file_lock *);
+};
+
+/*
+ * 	NFS_CALL(getattr, inode, (fattr));
+ * into
+ *	NFS_PROTO(inode)->getattr(fattr);
+ */
+#define NFS_CALL(op, inode, args)	NFS_PROTO(inode)->op args
+
+/*
+ * Function vectors etc. for the NFS client
+ */
+extern struct nfs_rpc_ops	nfs_v2_clientops;
+extern struct nfs_rpc_ops	nfs_v3_clientops;
+extern struct nfs_rpc_ops	nfs_v4_clientops;
+extern struct rpc_version	nfs_version2;
+extern struct rpc_version	nfs_version3;
+extern struct rpc_version	nfs_version4;
+
+#endif
diff --git a/include/linux/nfsd/auth.h b/include/linux/nfsd/auth.h
new file mode 100644
index 000000000000..0fb9f7212195
--- /dev/null
+++ b/include/linux/nfsd/auth.h
@@ -0,0 +1,27 @@
+/*
+ * include/linux/nfsd/auth.h
+ *
+ * nfsd-specific authentication stuff.
+ * uid/gid mapping not yet implemented.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_AUTH_H
+#define LINUX_NFSD_AUTH_H
+
+#ifdef __KERNEL__
+
+#define nfsd_luid(rq, uid)	((u32)(uid))
+#define nfsd_lgid(rq, gid)	((u32)(gid))
+#define nfsd_ruid(rq, uid)	((u32)(uid))
+#define nfsd_rgid(rq, gid)	((u32)(gid))
+
+/*
+ * Set the current process's fsuid/fsgid etc to those of the NFS
+ * client user
+ */
+int nfsd_setuser(struct svc_rqst *, struct svc_export *);
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_NFSD_AUTH_H */
diff --git a/include/linux/nfsd/cache.h b/include/linux/nfsd/cache.h
new file mode 100644
index 000000000000..c3a3557c2a5b
--- /dev/null
+++ b/include/linux/nfsd/cache.h
@@ -0,0 +1,81 @@
+/*
+ * include/linux/nfsd/cache.h
+ *
+ * Request reply cache. This was heavily inspired by the
+ * implementation in 4.3BSD/4.4BSD.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef NFSCACHE_H
+#define NFSCACHE_H
+
+#ifdef __KERNEL__
+#include <linux/in.h>
+#include <linux/uio.h>
+
+/*
+ * Representation of a reply cache entry. The first two members *must*
+ * be hash_next and hash_prev.
+ */
+struct svc_cacherep {
+	struct hlist_node	c_hash;
+	struct list_head	c_lru;
+
+	unsigned char		c_state,	/* unused, inprog, done */
+				c_type,		/* status, buffer */
+				c_secure : 1;	/* req came from port < 1024 */
+	struct sockaddr_in	c_addr;
+	u32			c_xid;
+	u32			c_prot;
+	u32			c_proc;
+	u32			c_vers;
+	unsigned long		c_timestamp;
+	union {
+		struct kvec	u_vec;
+		u32		u_status;
+	}			c_u;
+};
+
+#define c_replvec		c_u.u_vec
+#define c_replstat		c_u.u_status
+
+/* cache entry states */
+enum {
+	RC_UNUSED,
+	RC_INPROG,
+	RC_DONE
+};
+
+/* return values */
+enum {
+	RC_DROPIT,
+	RC_REPLY,
+	RC_DOIT,
+	RC_INTR
+};
+
+/*
+ * Cache types.
+ * We may want to add more types one day, e.g. for diropres and
+ * attrstat replies. Using cache entries with fixed length instead
+ * of buffer pointers may be more efficient.
+ */
+enum {
+	RC_NOCACHE,
+	RC_REPLSTAT,
+	RC_REPLBUFF,
+};
+
+/*
+ * If requests are retransmitted within this interval, they're dropped.
+ */
+#define RC_DELAY		(HZ/5)
+
+void	nfsd_cache_init(void);
+void	nfsd_cache_shutdown(void);
+int	nfsd_cache_lookup(struct svc_rqst *, int);
+void	nfsd_cache_update(struct svc_rqst *, int, u32 *);
+
+#endif /* __KERNEL__ */
+#endif /* NFSCACHE_H */
diff --git a/include/linux/nfsd/const.h b/include/linux/nfsd/const.h
new file mode 100644
index 000000000000..b75bb1b38d09
--- /dev/null
+++ b/include/linux/nfsd/const.h
@@ -0,0 +1,45 @@
+/*
+ * include/linux/nfsd/const.h
+ *
+ * Various constants related to NFS.
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_NFSD_CONST_H
+#define _LINUX_NFSD_CONST_H
+
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+
+/*
+ * Maximum protocol version supported by knfsd
+ */
+#define NFSSVC_MAXVERS		3
+
+/*
+ * Maximum blocksize supported by daemon currently at 32K
+ */
+#define NFSSVC_MAXBLKSIZE	(32*1024)
+
+#ifdef __KERNEL__
+
+#ifndef NFS_SUPER_MAGIC
+# define NFS_SUPER_MAGIC	0x6969
+#endif
+
+#define NFSD_BUFSIZE		(1024 + NFSSVC_MAXBLKSIZE)
+
+#ifdef CONFIG_NFSD_V4
+# define NFSSVC_XDRSIZE		NFS4_SVC_XDRSIZE
+#elif defined(CONFIG_NFSD_V3)
+# define NFSSVC_XDRSIZE		NFS3_SVC_XDRSIZE
+#else
+# define NFSSVC_XDRSIZE		NFS2_SVC_XDRSIZE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_NFSD_CONST_H */
diff --git a/include/linux/nfsd/debug.h b/include/linux/nfsd/debug.h
new file mode 100644
index 000000000000..ee4aa91788e7
--- /dev/null
+++ b/include/linux/nfsd/debug.h
@@ -0,0 +1,48 @@
+/*
+ * linux/include/linux/nfsd/debug.h
+ *
+ * Debugging-related stuff for nfsd
+ *
+ * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_DEBUG_H
+#define LINUX_NFSD_DEBUG_H
+
+#include <linux/sunrpc/debug.h>
+
+/*
+ * Enable debugging for nfsd.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define NFSD_DEBUG		1
+#endif
+
+/*
+ * knfsd debug flags
+ */
+#define NFSDDBG_SOCK		0x0001
+#define NFSDDBG_FH		0x0002
+#define NFSDDBG_EXPORT		0x0004
+#define NFSDDBG_SVC		0x0008
+#define NFSDDBG_PROC		0x0010
+#define NFSDDBG_FILEOP		0x0020
+#define NFSDDBG_AUTH		0x0040
+#define NFSDDBG_REPCACHE	0x0080
+#define NFSDDBG_XDR		0x0100
+#define NFSDDBG_LOCKD		0x0200
+#define NFSDDBG_ALL		0x7FFF
+#define NFSDDBG_NOCHANGE	0xFFFF
+
+
+#ifdef __KERNEL__
+# undef ifdebug
+# ifdef NFSD_DEBUG
+#  define ifdebug(flag)		if (nfsd_debug & NFSDDBG_##flag)
+# else
+#  define ifdebug(flag)		if (0)
+# endif
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_NFSD_DEBUG_H */
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
new file mode 100644
index 000000000000..6bad4766d3d9
--- /dev/null
+++ b/include/linux/nfsd/export.h
@@ -0,0 +1,137 @@
+/*
+ * include/linux/nfsd/export.h
+ * 
+ * Public declarations for NFS exports. The definitions for the
+ * syscall interface are in nfsctl.h
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef NFSD_EXPORT_H
+#define NFSD_EXPORT_H
+
+#include <asm/types.h>
+#ifdef __KERNEL__
+# include <linux/types.h>
+# include <linux/in.h>
+#endif
+
+/*
+ * Important limits for the exports stuff.
+ */
+#define NFSCLNT_IDMAX		1024
+#define NFSCLNT_ADDRMAX		16
+#define NFSCLNT_KEYMAX		32
+
+/*
+ * Export flags.
+ */
+#define NFSEXP_READONLY		0x0001
+#define NFSEXP_INSECURE_PORT	0x0002
+#define NFSEXP_ROOTSQUASH	0x0004
+#define NFSEXP_ALLSQUASH	0x0008
+#define NFSEXP_ASYNC		0x0010
+#define NFSEXP_GATHERED_WRITES	0x0020
+/* 40 80 100 currently unused */
+#define NFSEXP_NOHIDE		0x0200
+#define NFSEXP_NOSUBTREECHECK	0x0400
+#define	NFSEXP_NOAUTHNLM	0x0800		/* Don't authenticate NLM requests - just trust */
+#define NFSEXP_MSNFS		0x1000	/* do silly things that MS clients expect */
+#define NFSEXP_FSID		0x2000
+#define	NFSEXP_CROSSMOUNT	0x4000
+#define	NFSEXP_NOACL		0x8000	/* reserved for possible ACL related use */
+#define NFSEXP_ALLFLAGS		0xFE3F
+
+
+#ifdef __KERNEL__
+
+struct svc_export {
+	struct cache_head	h;
+	struct auth_domain *	ex_client;
+	int			ex_flags;
+	struct vfsmount *	ex_mnt;
+	struct dentry *		ex_dentry;
+	uid_t			ex_anon_uid;
+	gid_t			ex_anon_gid;
+	int			ex_fsid;
+};
+
+/* an "export key" (expkey) maps a filehandlefragement to an
+ * svc_export for a given client.  There can be two per export, one
+ * for type 0 (dev/ino), one for type 1 (fsid)
+ */
+struct svc_expkey {
+	struct cache_head	h;
+
+	struct auth_domain *	ek_client;
+	int			ek_fsidtype;
+	u32			ek_fsid[3];
+
+	struct svc_export *	ek_export;
+};
+
+#define EX_SECURE(exp)		(!((exp)->ex_flags & NFSEXP_INSECURE_PORT))
+#define EX_ISSYNC(exp)		(!((exp)->ex_flags & NFSEXP_ASYNC))
+#define EX_RDONLY(exp)		((exp)->ex_flags & NFSEXP_READONLY)
+#define EX_NOHIDE(exp)		((exp)->ex_flags & NFSEXP_NOHIDE)
+#define EX_WGATHER(exp)		((exp)->ex_flags & NFSEXP_GATHERED_WRITES)
+
+
+/*
+ * Function declarations
+ */
+void			nfsd_export_init(void);
+void			nfsd_export_shutdown(void);
+void			nfsd_export_flush(void);
+void			exp_readlock(void);
+void			exp_readunlock(void);
+struct svc_expkey *	exp_find_key(struct auth_domain *clp, 
+				     int fsid_type, u32 *fsidv,
+				     struct cache_req *reqp);
+struct svc_export *	exp_get_by_name(struct auth_domain *clp,
+					struct vfsmount *mnt,
+					struct dentry *dentry,
+					struct cache_req *reqp);
+struct svc_export *	exp_parent(struct auth_domain *clp,
+				   struct vfsmount *mnt,
+				   struct dentry *dentry,
+				   struct cache_req *reqp);
+int			exp_rootfh(struct auth_domain *, 
+					char *path, struct knfsd_fh *, int maxsize);
+int			exp_pseudoroot(struct auth_domain *, struct svc_fh *fhp, struct cache_req *creq);
+int			nfserrno(int errno);
+
+extern void expkey_put(struct cache_head *item, struct cache_detail *cd);
+extern void svc_export_put(struct cache_head *item, struct cache_detail *cd);
+extern struct cache_detail svc_export_cache, svc_expkey_cache;
+
+static inline void exp_put(struct svc_export *exp)
+{
+	svc_export_put(&exp->h, &svc_export_cache);
+}
+
+static inline void exp_get(struct svc_export *exp)
+{
+	cache_get(&exp->h);
+}
+static inline struct svc_export *
+exp_find(struct auth_domain *clp, int fsid_type, u32 *fsidv,
+	 struct cache_req *reqp)
+{
+	struct svc_expkey *ek = exp_find_key(clp, fsid_type, fsidv, reqp);
+	if (ek && !IS_ERR(ek)) {
+		struct svc_export *exp = ek->ek_export;
+		int err;
+		exp_get(exp);
+		expkey_put(&ek->h, &svc_expkey_cache);
+		if ((err = cache_check(&svc_export_cache, &exp->h, reqp)))
+			exp = ERR_PTR(err);
+		return exp;
+	} else
+		return ERR_PTR(PTR_ERR(ek));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* NFSD_EXPORT_H */
+
diff --git a/include/linux/nfsd/interface.h b/include/linux/nfsd/interface.h
new file mode 100644
index 000000000000..af0979704afb
--- /dev/null
+++ b/include/linux/nfsd/interface.h
@@ -0,0 +1,13 @@
+/*
+ * include/linux/nfsd/interface.h
+ *
+ * defines interface between nfsd and other bits of
+ * the kernel.  Particularly filesystems (eventually).
+ *
+ * Copyright (C) 2000 Neil Brown <neilb@cse.unsw.edu.au>
+ */
+
+#ifndef LINUX_NFSD_INTERFACE_H
+#define LINUX_NFSD_INTERFACE_H
+
+#endif /* LINUX_NFSD_INTERFACE_H */
diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h
new file mode 100644
index 000000000000..8f85d9a59607
--- /dev/null
+++ b/include/linux/nfsd/nfsd.h
@@ -0,0 +1,311 @@
+/*
+ * linux/include/linux/nfsd/nfsd.h
+ *
+ * Hodge-podge collection of knfsd-related stuff.
+ * I will sort this out later.
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_NFSD_H
+#define LINUX_NFSD_NFSD_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+#include <linux/dirent.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+
+#include <linux/nfsd/debug.h>
+#include <linux/nfsd/nfsfh.h>
+#include <linux/nfsd/export.h>
+#include <linux/nfsd/auth.h>
+#include <linux/nfsd/stats.h>
+#include <linux/nfsd/interface.h>
+/*
+ * nfsd version
+ */
+#define NFSD_VERSION		"0.5"
+#define NFSD_SUPPORTED_MINOR_VERSION	0
+
+#ifdef __KERNEL__
+/*
+ * Special flags for nfsd_permission. These must be different from MAY_READ,
+ * MAY_WRITE, and MAY_EXEC.
+ */
+#define MAY_NOP			0
+#define MAY_SATTR		8
+#define MAY_TRUNC		16
+#define MAY_LOCK		32
+#define MAY_OWNER_OVERRIDE	64
+#define	MAY_LOCAL_ACCESS	128 /* IRIX doing local access check on device special file*/
+#if (MAY_SATTR | MAY_TRUNC | MAY_LOCK | MAY_OWNER_OVERRIDE | MAY_LOCAL_ACCESS) & (MAY_READ | MAY_WRITE | MAY_EXEC)
+# error "please use a different value for MAY_SATTR or MAY_TRUNC or MAY_LOCK or MAY_LOCAL_ACCESS or MAY_OWNER_OVERRIDE."
+#endif
+#define MAY_CREATE		(MAY_EXEC|MAY_WRITE)
+#define MAY_REMOVE		(MAY_EXEC|MAY_WRITE|MAY_TRUNC)
+
+/*
+ * Callback function for readdir
+ */
+struct readdir_cd {
+	int			err;	/* 0, nfserr, or nfserr_eof */
+};
+typedef int		(*encode_dent_fn)(struct readdir_cd *, const char *,
+						int, loff_t, ino_t, unsigned int);
+typedef int (*nfsd_dirop_t)(struct inode *, struct dentry *, int, int);
+
+extern struct svc_program	nfsd_program;
+extern struct svc_version	nfsd_version2, nfsd_version3,
+				nfsd_version4;
+
+/*
+ * Function prototypes.
+ */
+int		nfsd_svc(unsigned short port, int nrservs);
+int		nfsd_dispatch(struct svc_rqst *rqstp, u32 *statp);
+
+/* nfsd/vfs.c */
+int		fh_lock_parent(struct svc_fh *, struct dentry *);
+int		nfsd_racache_init(int);
+void		nfsd_racache_shutdown(void);
+int		nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp,
+		                struct svc_export **expp);
+int		nfsd_lookup(struct svc_rqst *, struct svc_fh *,
+				const char *, int, struct svc_fh *);
+int		nfsd_setattr(struct svc_rqst *, struct svc_fh *,
+				struct iattr *, int, time_t);
+#ifdef CONFIG_NFSD_V4
+int             nfsd4_set_nfs4_acl(struct svc_rqst *, struct svc_fh *,
+                    struct nfs4_acl *);
+int             nfsd4_get_nfs4_acl(struct svc_rqst *, struct dentry *, struct nfs4_acl **);
+#endif /* CONFIG_NFSD_V4 */
+int		nfsd_create(struct svc_rqst *, struct svc_fh *,
+				char *name, int len, struct iattr *attrs,
+				int type, dev_t rdev, struct svc_fh *res);
+#ifdef CONFIG_NFSD_V3
+int		nfsd_access(struct svc_rqst *, struct svc_fh *, u32 *, u32 *);
+int		nfsd_create_v3(struct svc_rqst *, struct svc_fh *,
+				char *name, int len, struct iattr *attrs,
+				struct svc_fh *res, int createmode,
+				u32 *verifier, int *truncp);
+int		nfsd_commit(struct svc_rqst *, struct svc_fh *,
+				loff_t, unsigned long);
+#endif /* CONFIG_NFSD_V3 */
+int		nfsd_open(struct svc_rqst *, struct svc_fh *, int,
+				int, struct file **);
+void		nfsd_close(struct file *);
+int 		nfsd_read(struct svc_rqst *, struct svc_fh *, struct file *,
+				loff_t, struct kvec *, int, unsigned long *);
+int 		nfsd_write(struct svc_rqst *, struct svc_fh *,struct file *,
+				loff_t, struct kvec *,int, unsigned long, int *);
+int		nfsd_readlink(struct svc_rqst *, struct svc_fh *,
+				char *, int *);
+int		nfsd_symlink(struct svc_rqst *, struct svc_fh *,
+				char *name, int len, char *path, int plen,
+				struct svc_fh *res, struct iattr *);
+int		nfsd_link(struct svc_rqst *, struct svc_fh *,
+				char *, int, struct svc_fh *);
+int		nfsd_rename(struct svc_rqst *,
+				struct svc_fh *, char *, int,
+				struct svc_fh *, char *, int);
+int		nfsd_remove(struct svc_rqst *,
+				struct svc_fh *, char *, int);
+int		nfsd_unlink(struct svc_rqst *, struct svc_fh *, int type,
+				char *name, int len);
+int		nfsd_truncate(struct svc_rqst *, struct svc_fh *,
+				unsigned long size);
+int		nfsd_readdir(struct svc_rqst *, struct svc_fh *,
+			     loff_t *, struct readdir_cd *, encode_dent_fn);
+int		nfsd_statfs(struct svc_rqst *, struct svc_fh *,
+				struct kstatfs *);
+
+int		nfsd_notify_change(struct inode *, struct iattr *);
+int		nfsd_permission(struct svc_export *, struct dentry *, int);
+
+
+/* 
+ * NFSv4 State
+ */
+#ifdef CONFIG_NFSD_V4
+int nfs4_state_init(void);
+void nfs4_state_shutdown(void);
+time_t nfs4_lease_time(void);
+void nfs4_reset_lease(time_t leasetime);
+#else
+static inline int nfs4_state_init(void){return 0;}
+static inline void nfs4_state_shutdown(void){}
+static inline time_t nfs4_lease_time(void){return 0;}
+static inline void nfs4_reset_lease(time_t leasetime){}
+#endif
+
+/*
+ * lockd binding
+ */
+void		nfsd_lockd_init(void);
+void		nfsd_lockd_shutdown(void);
+
+
+/*
+ * These macros provide pre-xdr'ed values for faster operation.
+ */
+#define	nfs_ok			__constant_htonl(NFS_OK)
+#define	nfserr_perm		__constant_htonl(NFSERR_PERM)
+#define	nfserr_noent		__constant_htonl(NFSERR_NOENT)
+#define	nfserr_io		__constant_htonl(NFSERR_IO)
+#define	nfserr_nxio		__constant_htonl(NFSERR_NXIO)
+#define	nfserr_eagain		__constant_htonl(NFSERR_EAGAIN)
+#define	nfserr_acces		__constant_htonl(NFSERR_ACCES)
+#define	nfserr_exist		__constant_htonl(NFSERR_EXIST)
+#define	nfserr_xdev		__constant_htonl(NFSERR_XDEV)
+#define	nfserr_nodev		__constant_htonl(NFSERR_NODEV)
+#define	nfserr_notdir		__constant_htonl(NFSERR_NOTDIR)
+#define	nfserr_isdir		__constant_htonl(NFSERR_ISDIR)
+#define	nfserr_inval		__constant_htonl(NFSERR_INVAL)
+#define	nfserr_fbig		__constant_htonl(NFSERR_FBIG)
+#define	nfserr_nospc		__constant_htonl(NFSERR_NOSPC)
+#define	nfserr_rofs		__constant_htonl(NFSERR_ROFS)
+#define	nfserr_mlink		__constant_htonl(NFSERR_MLINK)
+#define	nfserr_opnotsupp	__constant_htonl(NFSERR_OPNOTSUPP)
+#define	nfserr_nametoolong	__constant_htonl(NFSERR_NAMETOOLONG)
+#define	nfserr_notempty		__constant_htonl(NFSERR_NOTEMPTY)
+#define	nfserr_dquot		__constant_htonl(NFSERR_DQUOT)
+#define	nfserr_stale		__constant_htonl(NFSERR_STALE)
+#define	nfserr_remote		__constant_htonl(NFSERR_REMOTE)
+#define	nfserr_wflush		__constant_htonl(NFSERR_WFLUSH)
+#define	nfserr_badhandle	__constant_htonl(NFSERR_BADHANDLE)
+#define	nfserr_notsync		__constant_htonl(NFSERR_NOT_SYNC)
+#define	nfserr_badcookie	__constant_htonl(NFSERR_BAD_COOKIE)
+#define	nfserr_notsupp		__constant_htonl(NFSERR_NOTSUPP)
+#define	nfserr_toosmall		__constant_htonl(NFSERR_TOOSMALL)
+#define	nfserr_serverfault	__constant_htonl(NFSERR_SERVERFAULT)
+#define	nfserr_badtype		__constant_htonl(NFSERR_BADTYPE)
+#define	nfserr_jukebox		__constant_htonl(NFSERR_JUKEBOX)
+#define	nfserr_denied		__constant_htonl(NFSERR_DENIED)
+#define	nfserr_deadlock		__constant_htonl(NFSERR_DEADLOCK)
+#define nfserr_expired          __constant_htonl(NFSERR_EXPIRED)
+#define	nfserr_bad_cookie	__constant_htonl(NFSERR_BAD_COOKIE)
+#define	nfserr_same		__constant_htonl(NFSERR_SAME)
+#define	nfserr_clid_inuse	__constant_htonl(NFSERR_CLID_INUSE)
+#define	nfserr_stale_clientid	__constant_htonl(NFSERR_STALE_CLIENTID)
+#define	nfserr_resource		__constant_htonl(NFSERR_RESOURCE)
+#define	nfserr_nofilehandle	__constant_htonl(NFSERR_NOFILEHANDLE)
+#define	nfserr_minor_vers_mismatch	__constant_htonl(NFSERR_MINOR_VERS_MISMATCH)
+#define nfserr_share_denied	__constant_htonl(NFSERR_SHARE_DENIED)
+#define nfserr_stale_stateid	__constant_htonl(NFSERR_STALE_STATEID)
+#define nfserr_old_stateid	__constant_htonl(NFSERR_OLD_STATEID)
+#define nfserr_bad_stateid	__constant_htonl(NFSERR_BAD_STATEID)
+#define nfserr_bad_seqid	__constant_htonl(NFSERR_BAD_SEQID)
+#define	nfserr_symlink		__constant_htonl(NFSERR_SYMLINK)
+#define	nfserr_not_same		__constant_htonl(NFSERR_NOT_SAME)
+#define	nfserr_restorefh	__constant_htonl(NFSERR_RESTOREFH)
+#define	nfserr_attrnotsupp	__constant_htonl(NFSERR_ATTRNOTSUPP)
+#define	nfserr_bad_xdr		__constant_htonl(NFSERR_BAD_XDR)
+#define	nfserr_openmode		__constant_htonl(NFSERR_OPENMODE)
+#define	nfserr_locks_held	__constant_htonl(NFSERR_LOCKS_HELD)
+#define	nfserr_op_illegal	__constant_htonl(NFSERR_OP_ILLEGAL)
+#define	nfserr_grace		__constant_htonl(NFSERR_GRACE)
+#define	nfserr_no_grace		__constant_htonl(NFSERR_NO_GRACE)
+#define	nfserr_reclaim_bad	__constant_htonl(NFSERR_RECLAIM_BAD)
+#define	nfserr_badname		__constant_htonl(NFSERR_BADNAME)
+#define	nfserr_cb_path_down	__constant_htonl(NFSERR_CB_PATH_DOWN)
+
+/* error codes for internal use */
+/* if a request fails due to kmalloc failure, it gets dropped.
+ *  Client should resend eventually
+ */
+#define	nfserr_dropit		__constant_htonl(30000)
+/* end-of-file indicator in readdir */
+#define	nfserr_eof		__constant_htonl(30001)
+
+/* Check for dir entries '.' and '..' */
+#define isdotent(n, l)	(l < 3 && n[0] == '.' && (l == 1 || n[1] == '.'))
+
+/*
+ * Time of server startup
+ */
+extern struct timeval	nfssvc_boot;
+
+static inline int is_fsid(struct svc_fh *fh, struct knfsd_fh *reffh)
+{
+	if (fh->fh_export->ex_flags & NFSEXP_FSID) {
+		struct vfsmount *mnt = fh->fh_export->ex_mnt;
+		if (!old_valid_dev(mnt->mnt_sb->s_dev) ||
+		    (reffh->fh_version == 1 && reffh->fh_fsid_type == 1))
+			return 1;
+	}
+	return 0;
+}
+
+
+#ifdef CONFIG_NFSD_V4
+
+/* before processing a COMPOUND operation, we have to check that there
+ * is enough space in the buffer for XDR encode to succeed.  otherwise,
+ * we might process an operation with side effects, and be unable to
+ * tell the client that the operation succeeded.
+ *
+ * COMPOUND_SLACK_SPACE - this is the minimum amount of buffer space
+ * needed to encode an "ordinary" _successful_ operation.  (GETATTR,
+ * READ, READDIR, and READLINK have their own buffer checks.)  if we
+ * fall below this level, we fail the next operation with NFS4ERR_RESOURCE.
+ *
+ * COMPOUND_ERR_SLACK_SPACE - this is the minimum amount of buffer space
+ * needed to encode an operation which has failed with NFS4ERR_RESOURCE.
+ * care is taken to ensure that we never fall below this level for any
+ * reason.
+ */
+#define	COMPOUND_SLACK_SPACE		140    /* OP_GETFH */
+#define COMPOUND_ERR_SLACK_SPACE	12     /* OP_SETATTR */
+
+#define NFSD_LEASE_TIME                 (nfs4_lease_time())
+#define NFSD_LAUNDROMAT_MINTIMEOUT      10   /* seconds */
+
+/*
+ * The following attributes are currently not supported by the NFSv4 server:
+ *    ARCHIVE       (deprecated anyway)
+ *    FS_LOCATIONS  (will be supported eventually)
+ *    HIDDEN        (unlikely to be supported any time soon)
+ *    MIMETYPE      (unlikely to be supported any time soon)
+ *    QUOTA_*       (will be supported in a forthcoming patch)
+ *    SYSTEM        (unlikely to be supported any time soon)
+ *    TIME_BACKUP   (unlikely to be supported any time soon)
+ *    TIME_CREATE   (unlikely to be supported any time soon)
+ */
+#define NFSD_SUPPORTED_ATTRS_WORD0                                                          \
+(FATTR4_WORD0_SUPPORTED_ATTRS   | FATTR4_WORD0_TYPE         | FATTR4_WORD0_FH_EXPIRE_TYPE   \
+ | FATTR4_WORD0_CHANGE          | FATTR4_WORD0_SIZE         | FATTR4_WORD0_LINK_SUPPORT     \
+ | FATTR4_WORD0_SYMLINK_SUPPORT | FATTR4_WORD0_NAMED_ATTR   | FATTR4_WORD0_FSID             \
+ | FATTR4_WORD0_UNIQUE_HANDLES  | FATTR4_WORD0_LEASE_TIME   | FATTR4_WORD0_RDATTR_ERROR     \
+ | FATTR4_WORD0_ACLSUPPORT      | FATTR4_WORD0_CANSETTIME   | FATTR4_WORD0_CASE_INSENSITIVE \
+ | FATTR4_WORD0_CASE_PRESERVING | FATTR4_WORD0_CHOWN_RESTRICTED                             \
+ | FATTR4_WORD0_FILEHANDLE      | FATTR4_WORD0_FILEID       | FATTR4_WORD0_FILES_AVAIL      \
+ | FATTR4_WORD0_FILES_FREE      | FATTR4_WORD0_FILES_TOTAL  | FATTR4_WORD0_HOMOGENEOUS      \
+ | FATTR4_WORD0_MAXFILESIZE     | FATTR4_WORD0_MAXLINK      | FATTR4_WORD0_MAXNAME          \
+ | FATTR4_WORD0_MAXREAD         | FATTR4_WORD0_MAXWRITE     | FATTR4_WORD0_ACL)
+
+#define NFSD_SUPPORTED_ATTRS_WORD1                                                          \
+(FATTR4_WORD1_MODE              | FATTR4_WORD1_NO_TRUNC     | FATTR4_WORD1_NUMLINKS         \
+ | FATTR4_WORD1_OWNER	        | FATTR4_WORD1_OWNER_GROUP  | FATTR4_WORD1_RAWDEV           \
+ | FATTR4_WORD1_SPACE_AVAIL     | FATTR4_WORD1_SPACE_FREE   | FATTR4_WORD1_SPACE_TOTAL      \
+ | FATTR4_WORD1_SPACE_USED      | FATTR4_WORD1_TIME_ACCESS  | FATTR4_WORD1_TIME_ACCESS_SET  \
+ | FATTR4_WORD1_TIME_DELTA   | FATTR4_WORD1_TIME_METADATA    \
+ | FATTR4_WORD1_TIME_MODIFY     | FATTR4_WORD1_TIME_MODIFY_SET | FATTR4_WORD1_MOUNTED_ON_FILEID)
+
+/* These will return ERR_INVAL if specified in GETATTR or READDIR. */
+#define NFSD_WRITEONLY_ATTRS_WORD1							    \
+(FATTR4_WORD1_TIME_ACCESS_SET   | FATTR4_WORD1_TIME_MODIFY_SET)
+
+/* These are the only attrs allowed in CREATE/OPEN/SETATTR. */
+#define NFSD_WRITEABLE_ATTRS_WORD0                                                          \
+(FATTR4_WORD0_SIZE              | FATTR4_WORD0_ACL                                         )
+#define NFSD_WRITEABLE_ATTRS_WORD1                                                          \
+(FATTR4_WORD1_MODE              | FATTR4_WORD1_OWNER         | FATTR4_WORD1_OWNER_GROUP     \
+ | FATTR4_WORD1_TIME_ACCESS_SET | FATTR4_WORD1_TIME_METADATA | FATTR4_WORD1_TIME_MODIFY_SET)
+
+#endif /* CONFIG_NFSD_V4 */
+
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_NFSD_NFSD_H */
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
new file mode 100644
index 000000000000..bb842ea41033
--- /dev/null
+++ b/include/linux/nfsd/nfsfh.h
@@ -0,0 +1,343 @@
+/*
+ * include/linux/nfsd/nfsfh.h
+ *
+ * This file describes the layout of the file handles as passed
+ * over the wire.
+ *
+ * Earlier versions of knfsd used to sign file handles using keyed MD5
+ * or SHA. I've removed this code, because it doesn't give you more
+ * security than blocking external access to port 2049 on your firewall.
+ *
+ * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_NFSD_FH_H
+#define _LINUX_NFSD_FH_H
+
+#include <asm/types.h>
+#ifdef __KERNEL__
+# include <linux/config.h>
+# include <linux/types.h>
+# include <linux/string.h>
+# include <linux/fs.h>
+#endif
+#include <linux/nfsd/const.h>
+#include <linux/nfsd/debug.h>
+
+/*
+ * This is the old "dentry style" Linux NFSv2 file handle.
+ *
+ * The xino and xdev fields are currently used to transport the
+ * ino/dev of the exported inode.
+ */
+struct nfs_fhbase_old {
+	__u32		fb_dcookie;	/* dentry cookie - always 0xfeebbaca */
+	__u32		fb_ino;		/* our inode number */
+	__u32		fb_dirino;	/* dir inode number, 0 for directories */
+	__u32		fb_dev;		/* our device */
+	__u32		fb_xdev;
+	__u32		fb_xino;
+	__u32		fb_generation;
+};
+
+/*
+ * This is the new flexible, extensible style NFSv2/v3 file handle.
+ * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
+ *
+ * The file handle is seens as a list of 4byte words.
+ * The first word contains a version number (1) and four descriptor bytes
+ * that tell how the remaining 3 variable length fields should be handled.
+ * These three bytes are auth_type, fsid_type and fileid_type.
+ *
+ * All 4byte values are in host-byte-order.
+ *
+ * The auth_type field specifies how the filehandle can be authenticated
+ * This might allow a file to be confirmed to be in a writable part of a
+ * filetree without checking the path from it upto the root.
+ * Current values:
+ *     0  - No authentication.  fb_auth is 0 bytes long
+ * Possible future values:
+ *     1  - 4 bytes taken from MD5 hash of the remainer of the file handle
+ *          prefixed by a secret and with the important export flags.
+ *
+ * The fsid_type identifies how the filesystem (or export point) is
+ *    encoded.
+ *  Current values:
+ *     0  - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
+ *        NOTE: we cannot use the kdev_t device id value, because kdev_t.h
+ *              says we mustn't.  We must break it up and reassemble.
+ *     1  - 4 byte user specified identifier
+ *     2  - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
+ *     3  - 4 byte device id, encoded for user-space, 4 byte inode number
+ *
+ * The fileid_type identified how the file within the filesystem is encoded.
+ * This is (will be) passed to, and set by, the underlying filesystem if it supports
+ * filehandle operations.  The filesystem must not use the value '0' or '0xff' and may
+ * only use the values 1 and 2 as defined below:
+ *  Current values:
+ *    0   - The root, or export point, of the filesystem.  fb_fileid is 0 bytes.
+ *    1   - 32bit inode number, 32 bit generation number.
+ *    2   - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number.
+ *
+ */
+struct nfs_fhbase_new {
+	__u8		fb_version;	/* == 1, even => nfs_fhbase_old */
+	__u8		fb_auth_type;
+	__u8		fb_fsid_type;
+	__u8		fb_fileid_type;
+	__u32		fb_auth[1];
+/*	__u32		fb_fsid[0]; floating */
+/*	__u32		fb_fileid[0]; floating */
+};
+
+struct knfsd_fh {
+	unsigned int	fh_size;	/* significant for NFSv3.
+					 * Points to the current size while building
+					 * a new file handle
+					 */
+	union {
+		struct nfs_fhbase_old	fh_old;
+		__u32			fh_pad[NFS4_FHSIZE/4];
+		struct nfs_fhbase_new	fh_new;
+	} fh_base;
+};
+
+#define ofh_dcookie		fh_base.fh_old.fb_dcookie
+#define ofh_ino			fh_base.fh_old.fb_ino
+#define ofh_dirino		fh_base.fh_old.fb_dirino
+#define ofh_dev			fh_base.fh_old.fb_dev
+#define ofh_xdev		fh_base.fh_old.fb_xdev
+#define ofh_xino		fh_base.fh_old.fb_xino
+#define ofh_generation		fh_base.fh_old.fb_generation
+
+#define	fh_version		fh_base.fh_new.fb_version
+#define	fh_fsid_type		fh_base.fh_new.fb_fsid_type
+#define	fh_auth_type		fh_base.fh_new.fb_auth_type
+#define	fh_fileid_type		fh_base.fh_new.fb_fileid_type
+#define	fh_auth			fh_base.fh_new.fb_auth
+#define	fh_fsid			fh_base.fh_new.fb_auth
+
+#ifdef __KERNEL__
+
+static inline __u32 ino_t_to_u32(ino_t ino)
+{
+	return (__u32) ino;
+}
+
+static inline ino_t u32_to_ino_t(__u32 uino)
+{
+	return (ino_t) uino;
+}
+
+/*
+ * This is the internal representation of an NFS handle used in knfsd.
+ * pre_mtime/post_version will be used to support wcc_attr's in NFSv3.
+ */
+typedef struct svc_fh {
+	struct knfsd_fh		fh_handle;	/* FH data */
+	struct dentry *		fh_dentry;	/* validated dentry */
+	struct svc_export *	fh_export;	/* export pointer */
+	int			fh_maxsize;	/* max size for fh_handle */
+
+	unsigned char		fh_locked;	/* inode locked by us */
+
+#ifdef CONFIG_NFSD_V3
+	unsigned char		fh_post_saved;	/* post-op attrs saved */
+	unsigned char		fh_pre_saved;	/* pre-op attrs saved */
+
+	/* Pre-op attributes saved during fh_lock */
+	__u64			fh_pre_size;	/* size before operation */
+	struct timespec		fh_pre_mtime;	/* mtime before oper */
+	struct timespec		fh_pre_ctime;	/* ctime before oper */
+
+	/* Post-op attributes saved in fh_unlock */
+	umode_t			fh_post_mode;	/* i_mode */
+	nlink_t			fh_post_nlink;	/* i_nlink */
+	uid_t			fh_post_uid;	/* i_uid */
+	gid_t			fh_post_gid;	/* i_gid */
+	__u64			fh_post_size;	/* i_size */
+	unsigned long		fh_post_blocks; /* i_blocks */
+	unsigned long		fh_post_blksize;/* i_blksize */
+	__u32			fh_post_rdev[2];/* i_rdev */
+	struct timespec		fh_post_atime;	/* i_atime */
+	struct timespec		fh_post_mtime;	/* i_mtime */
+	struct timespec		fh_post_ctime;	/* i_ctime */
+#endif /* CONFIG_NFSD_V3 */
+
+} svc_fh;
+
+static inline void mk_fsid_v0(u32 *fsidv, dev_t dev, ino_t ino)
+{
+	fsidv[0] = htonl((MAJOR(dev)<<16) |
+			MINOR(dev));
+	fsidv[1] = ino_t_to_u32(ino);
+}
+
+static inline void mk_fsid_v1(u32 *fsidv, u32 fsid)
+{
+	fsidv[0] = fsid;
+}
+
+static inline void mk_fsid_v2(u32 *fsidv, dev_t dev, ino_t ino)
+{
+	fsidv[0] = htonl(MAJOR(dev));
+	fsidv[1] = htonl(MINOR(dev));
+	fsidv[2] = ino_t_to_u32(ino);
+}
+
+static inline void mk_fsid_v3(u32 *fsidv, dev_t dev, ino_t ino)
+{
+	fsidv[0] = new_encode_dev(dev);
+	fsidv[1] = ino_t_to_u32(ino);
+}
+
+static inline int key_len(int type)
+{
+	switch(type) {
+	case 0: return 8;
+	case 1: return 4;
+	case 2: return 12;
+	case 3: return 8;
+	default: return 0;
+	}
+}
+
+/*
+ * Shorthand for dprintk()'s
+ */
+extern char * SVCFH_fmt(struct svc_fh *fhp);
+
+/*
+ * Function prototypes
+ */
+u32	fh_verify(struct svc_rqst *, struct svc_fh *, int, int);
+int	fh_compose(struct svc_fh *, struct svc_export *, struct dentry *, struct svc_fh *);
+int	fh_update(struct svc_fh *);
+void	fh_put(struct svc_fh *);
+
+static __inline__ struct svc_fh *
+fh_copy(struct svc_fh *dst, struct svc_fh *src)
+{
+	if (src->fh_dentry || src->fh_locked) {
+		struct dentry *dentry = src->fh_dentry;
+		printk(KERN_ERR "fh_copy: copying %s/%s, already verified!\n",
+			dentry->d_parent->d_name.name, dentry->d_name.name);
+	}
+			
+	*dst = *src;
+	return dst;
+}
+
+static __inline__ struct svc_fh *
+fh_init(struct svc_fh *fhp, int maxsize)
+{
+	memset(fhp, 0, sizeof(*fhp));
+	fhp->fh_maxsize = maxsize;
+	return fhp;
+}
+
+#ifdef CONFIG_NFSD_V3
+/*
+ * Fill in the pre_op attr for the wcc data
+ */
+static inline void
+fill_pre_wcc(struct svc_fh *fhp)
+{
+	struct inode    *inode;
+
+	inode = fhp->fh_dentry->d_inode;
+	if (!fhp->fh_pre_saved) {
+		fhp->fh_pre_mtime = inode->i_mtime;
+		fhp->fh_pre_ctime = inode->i_ctime;
+			fhp->fh_pre_size  = inode->i_size;
+			fhp->fh_pre_saved = 1;
+	}
+}
+
+/*
+ * Fill in the post_op attr for the wcc data
+ */
+static inline void
+fill_post_wcc(struct svc_fh *fhp)
+{
+	struct inode    *inode = fhp->fh_dentry->d_inode;
+
+	if (fhp->fh_post_saved)
+		printk("nfsd: inode locked twice during operation.\n");
+
+	fhp->fh_post_mode       = inode->i_mode;
+	fhp->fh_post_nlink      = inode->i_nlink;
+	fhp->fh_post_uid	= inode->i_uid;
+	fhp->fh_post_gid	= inode->i_gid;
+	fhp->fh_post_size       = inode->i_size;
+	if (inode->i_blksize) {
+		fhp->fh_post_blksize    = inode->i_blksize;
+		fhp->fh_post_blocks     = inode->i_blocks;
+	} else {
+		fhp->fh_post_blksize    = BLOCK_SIZE;
+		/* how much do we care for accuracy with MinixFS? */
+		fhp->fh_post_blocks     = (inode->i_size+511) >> 9;
+	}
+	fhp->fh_post_rdev[0]    = htonl((u32)imajor(inode));
+	fhp->fh_post_rdev[1]    = htonl((u32)iminor(inode));
+	fhp->fh_post_atime      = inode->i_atime;
+	fhp->fh_post_mtime      = inode->i_mtime;
+	fhp->fh_post_ctime      = inode->i_ctime;
+	fhp->fh_post_saved      = 1;
+}
+#else
+#define	fill_pre_wcc(ignored)
+#define fill_post_wcc(notused)
+#endif /* CONFIG_NFSD_V3 */
+
+
+/*
+ * Lock a file handle/inode
+ * NOTE: both fh_lock and fh_unlock are done "by hand" in
+ * vfs.c:nfsd_rename as it needs to grab 2 i_sem's at once
+ * so, any changes here should be reflected there.
+ */
+static inline void
+fh_lock(struct svc_fh *fhp)
+{
+	struct dentry	*dentry = fhp->fh_dentry;
+	struct inode	*inode;
+
+	dfprintk(FILEOP, "nfsd: fh_lock(%s) locked = %d\n",
+			SVCFH_fmt(fhp), fhp->fh_locked);
+
+	if (!fhp->fh_dentry) {
+		printk(KERN_ERR "fh_lock: fh not verified!\n");
+		return;
+	}
+	if (fhp->fh_locked) {
+		printk(KERN_WARNING "fh_lock: %s/%s already locked!\n",
+			dentry->d_parent->d_name.name, dentry->d_name.name);
+		return;
+	}
+
+	inode = dentry->d_inode;
+	down(&inode->i_sem);
+	fill_pre_wcc(fhp);
+	fhp->fh_locked = 1;
+}
+
+/*
+ * Unlock a file handle/inode
+ */
+static inline void
+fh_unlock(struct svc_fh *fhp)
+{
+	if (!fhp->fh_dentry)
+		printk(KERN_ERR "fh_unlock: fh not verified!\n");
+
+	if (fhp->fh_locked) {
+		fill_post_wcc(fhp);
+		up(&fhp->fh_dentry->d_inode->i_sem);
+		fhp->fh_locked = 0;
+	}
+}
+#endif /* __KERNEL__ */
+
+
+#endif /* _LINUX_NFSD_FH_H */
diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h
new file mode 100644
index 000000000000..b6b2fe1e7c63
--- /dev/null
+++ b/include/linux/nfsd/state.h
@@ -0,0 +1,298 @@
+/*
+ *  linux/include/nfsd/state.h
+ *
+ *  Copyright (c) 2001 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson <andros@umich.edu>
+ *  
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _NFSD4_STATE_H
+#define _NFSD4_STATE_H
+
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/sunrpc/clnt.h>
+
+#define NFS4_OPAQUE_LIMIT 1024
+typedef struct {
+	u32             cl_boot;
+	u32             cl_id;
+} clientid_t;
+
+typedef struct {
+	u32             so_boot;
+	u32             so_stateownerid;
+	u32             so_fileid;
+} stateid_opaque_t;
+
+typedef struct {
+	u32                     si_generation;
+	stateid_opaque_t        si_opaque;
+} stateid_t;
+#define si_boot           si_opaque.so_boot
+#define si_stateownerid   si_opaque.so_stateownerid
+#define si_fileid         si_opaque.so_fileid
+
+extern stateid_t zerostateid;
+extern stateid_t onestateid;
+
+#define ZERO_STATEID(stateid)       (!memcmp((stateid), &zerostateid, sizeof(stateid_t)))
+#define ONE_STATEID(stateid)        (!memcmp((stateid), &onestateid, sizeof(stateid_t)))
+
+struct nfs4_cb_recall {
+	u32			cbr_ident;
+	int			cbr_trunc;
+	stateid_t		cbr_stateid;
+	u32			cbr_fhlen;
+	u32			cbr_fhval[NFS4_FHSIZE];
+	struct nfs4_delegation	*cbr_dp;
+};
+
+struct nfs4_delegation {
+	struct list_head	dl_del_perfile; /* nfs4_file->fi_del_perfile */
+	struct list_head	dl_del_perclnt; /* nfs4_client->cl_del_perclnt*/
+	struct list_head	dl_recall_lru;  /* delegation recalled */
+	atomic_t		dl_count;       /* ref count */
+	struct nfs4_client	*dl_client;
+	struct nfs4_file	*dl_file;
+	struct file_lock	*dl_flock;
+	struct file		*dl_vfs_file;
+	u32			dl_type;
+	time_t			dl_time;
+	struct nfs4_cb_recall	dl_recall;
+};
+
+#define dl_stateid      dl_recall.cbr_stateid
+#define dl_fhlen        dl_recall.cbr_fhlen
+#define dl_fhval        dl_recall.cbr_fhval
+
+/* client delegation callback info */
+struct nfs4_callback {
+	/* SETCLIENTID info */
+	u32			cb_parsed;  /* addr parsed */
+	u32                     cb_addr;
+	unsigned short          cb_port;
+	u32                     cb_prog;
+	u32                     cb_ident;
+	/* RPC client info */
+	atomic_t		cb_set;     /* successful CB_NULL call */
+	struct rpc_program      cb_program;
+	struct rpc_stat         cb_stat;
+	struct rpc_clnt *       cb_client;
+};
+
+/*
+ * struct nfs4_client - one per client.  Clientids live here.
+ * 	o Each nfs4_client is hashed by clientid.
+ *
+ * 	o Each nfs4_clients is also hashed by name 
+ * 	  (the opaque quantity initially sent by the client to identify itself).
+ * 	  
+ *	o cl_perclient list is used to ensure no dangling stateowner references
+ *	  when we expire the nfs4_client
+ */
+struct nfs4_client {
+	struct list_head	cl_idhash; 	/* hash by cl_clientid.id */
+	struct list_head	cl_strhash; 	/* hash by cl_name */
+	struct list_head	cl_perclient; 	/* list: stateowners */
+	struct list_head	cl_del_perclnt; /* list: delegations */
+	struct list_head        cl_lru;         /* tail queue */
+	struct xdr_netobj	cl_name; 	/* id generated by client */
+	nfs4_verifier		cl_verifier; 	/* generated by client */
+	time_t                  cl_time;        /* time of last lease renewal */
+	u32			cl_addr; 	/* client ipaddress */
+	struct svc_cred		cl_cred; 	/* setclientid principal */
+	clientid_t		cl_clientid;	/* generated by server */
+	nfs4_verifier		cl_confirm;	/* generated by server */
+	struct nfs4_callback	cl_callback;    /* callback info */
+	atomic_t		cl_count;	/* ref count */
+};
+
+/* struct nfs4_client_reset
+ * one per old client. Populates reset_str_hashtbl. Filled from conf_id_hashtbl
+ * upon lease reset, or from upcall to state_daemon (to read in state
+ * from non-volitile storage) upon reboot.
+ */
+struct nfs4_client_reclaim {
+	struct list_head	cr_strhash;	/* hash by cr_name */
+	struct xdr_netobj 	cr_name; 	/* id generated by client */
+};
+
+static inline void
+update_stateid(stateid_t *stateid)
+{
+	stateid->si_generation++;
+}
+
+/* A reasonable value for REPLAY_ISIZE was estimated as follows:  
+ * The OPEN response, typically the largest, requires 
+ *   4(status) + 8(stateid) + 20(changeinfo) + 4(rflags) +  8(verifier) + 
+ *   4(deleg. type) + 8(deleg. stateid) + 4(deleg. recall flag) + 
+ *   20(deleg. space limit) + ~32(deleg. ace) = 112 bytes 
+ */
+
+#define NFSD4_REPLAY_ISIZE       112 
+
+/*
+ * Replay buffer, where the result of the last seqid-mutating operation 
+ * is cached. 
+ */
+struct nfs4_replay {
+	u32			rp_status;
+	unsigned int		rp_buflen;
+	char			*rp_buf;
+	unsigned		intrp_allocated;
+	int			rp_openfh_len;
+	char			rp_openfh[NFS4_FHSIZE];
+	char			rp_ibuf[NFSD4_REPLAY_ISIZE];
+};
+
+/*
+* nfs4_stateowner can either be an open_owner, or a lock_owner
+*
+*    so_idhash:  stateid_hashtbl[] for open owner, lockstateid_hashtbl[]
+*         for lock_owner
+*    so_strhash: ownerstr_hashtbl[] for open_owner, lock_ownerstr_hashtbl[]
+*         for lock_owner
+*    so_perclient: nfs4_client->cl_perclient entry - used when nfs4_client
+*         struct is reaped.
+*    so_perfilestate: heads the list of nfs4_stateid (either open or lock) 
+*         and is used to ensure no dangling nfs4_stateid references when we 
+*         release a stateowner.
+*    so_perlockowner: (open) nfs4_stateid->st_perlockowner entry - used when
+*         close is called to reap associated byte-range locks
+*    so_close_lru: (open) stateowner is placed on this list instead of being
+*         reaped (when so_perfilestate is empty) to hold the last close replay.
+*         reaped by laundramat thread after lease period.
+*/
+struct nfs4_stateowner {
+	struct kref		so_ref;
+	struct list_head        so_idhash;   /* hash by so_id */
+	struct list_head        so_strhash;   /* hash by op_name */
+	struct list_head        so_perclient; /* nfs4_client->cl_perclient */
+	struct list_head        so_perfilestate; /* list: nfs4_stateid */
+	struct list_head        so_perlockowner; /* nfs4_stateid->st_perlockowner */
+	struct list_head	so_close_lru; /* tail queue */
+	time_t			so_time; /* time of placement on so_close_lru */
+	int			so_is_open_owner; /* 1=openowner,0=lockowner */
+	u32                     so_id;
+	struct nfs4_client *    so_client;
+	u32                     so_seqid;    
+	struct xdr_netobj       so_owner;     /* open owner name */
+	int                     so_confirmed; /* successful OPEN_CONFIRM? */
+	struct nfs4_replay	so_replay;
+};
+
+/*
+*  nfs4_file: a file opened by some number of (open) nfs4_stateowners.
+*    o fi_perfile list is used to search for conflicting 
+*      share_acces, share_deny on the file.
+*/
+struct nfs4_file {
+	struct list_head        fi_hash;    /* hash by "struct inode *" */
+	struct list_head        fi_perfile; /* list: nfs4_stateid */
+	struct list_head	fi_del_perfile; /* list: nfs4_delegation */
+	struct inode		*fi_inode;
+	u32                     fi_id;      /* used with stateowner->so_id 
+					     * for stateid_hashtbl hash */
+};
+
+/*
+* nfs4_stateid can either be an open stateid or (eventually) a lock stateid
+*
+* (open)nfs4_stateid: one per (open)nfs4_stateowner, nfs4_file
+*
+* 	st_hash: stateid_hashtbl[] entry or lockstateid_hashtbl entry
+* 	st_perfile: file_hashtbl[] entry.
+* 	st_perfile_state: nfs4_stateowner->so_perfilestate
+*       st_perlockowner: (open stateid) list of lock nfs4_stateowners
+* 	st_access_bmap: used only for open stateid
+* 	st_deny_bmap: used only for open stateid
+*/
+
+struct nfs4_stateid {
+	struct list_head              st_hash; 
+	struct list_head              st_perfile;
+	struct list_head              st_perfilestate; 
+	struct list_head              st_perlockowner;
+	struct nfs4_stateowner      * st_stateowner;
+	struct nfs4_file            * st_file;
+	stateid_t                     st_stateid;
+	struct file                 * st_vfs_file;
+	unsigned long                 st_access_bmap;
+	unsigned long                 st_deny_bmap;
+};
+
+/* flags for preprocess_seqid_op() */
+#define CHECK_FH                0x00000001
+#define CONFIRM                 0x00000002
+#define OPEN_STATE              0x00000004
+#define LOCK_STATE              0x00000008
+#define RD_STATE	        0x00000010
+#define WR_STATE	        0x00000020
+#define CLOSE_STATE             0x00000040
+#define DELEG_RET               0x00000080
+
+#define seqid_mutating_err(err)                       \
+	(((err) != nfserr_stale_clientid) &&    \
+	((err) != nfserr_bad_seqid) &&          \
+	((err) != nfserr_stale_stateid) &&      \
+	((err) != nfserr_bad_stateid))
+
+extern time_t nfs4_laundromat(void);
+extern int nfsd4_renew(clientid_t *clid);
+extern int nfs4_preprocess_stateid_op(struct svc_fh *current_fh, 
+		stateid_t *stateid, int flags, struct file **filp);
+extern int nfs4_share_conflict(struct svc_fh *current_fh, 
+		unsigned int deny_type);
+extern void nfs4_lock_state(void);
+extern void nfs4_unlock_state(void);
+extern int nfs4_in_grace(void);
+extern int nfs4_check_open_reclaim(clientid_t *clid);
+extern void put_nfs4_client(struct nfs4_client *clp);
+extern void nfs4_free_stateowner(struct kref *kref);
+extern void nfsd4_probe_callback(struct nfs4_client *clp);
+extern void nfsd4_cb_recall(struct nfs4_delegation *dp);
+extern void nfs4_put_delegation(struct nfs4_delegation *dp);
+
+static inline void
+nfs4_put_stateowner(struct nfs4_stateowner *so)
+{
+	kref_put(&so->so_ref, nfs4_free_stateowner);
+}
+
+static inline void
+nfs4_get_stateowner(struct nfs4_stateowner *so)
+{
+	kref_get(&so->so_ref);
+}
+
+#endif   /* NFSD4_STATE_H */
diff --git a/include/linux/nfsd/stats.h b/include/linux/nfsd/stats.h
new file mode 100644
index 000000000000..b6f1e0cda4f2
--- /dev/null
+++ b/include/linux/nfsd/stats.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/nfsd/stats.h
+ *
+ * Statistics for NFS server.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_STATS_H
+#define LINUX_NFSD_STATS_H
+
+struct nfsd_stats {
+	unsigned int	rchits;		/* repcache hits */
+	unsigned int	rcmisses;	/* repcache hits */
+	unsigned int	rcnocache;	/* uncached reqs */
+	unsigned int	fh_stale;	/* FH stale error */
+	unsigned int	fh_lookup;	/* dentry cached */
+	unsigned int	fh_anon;	/* anon file dentry returned */
+	unsigned int	fh_nocache_dir;	/* filehandle not found in dcache */
+	unsigned int	fh_nocache_nondir;	/* filehandle not found in dcache */
+	unsigned int	io_read;	/* bytes returned to read requests */
+	unsigned int	io_write;	/* bytes passed in write requests */
+	unsigned int	th_cnt;		/* number of available threads */
+	unsigned int	th_usage[10];	/* number of ticks during which n perdeciles
+					 * of available threads were in use */
+	unsigned int	th_fullcnt;	/* number of times last free thread was used */
+	unsigned int	ra_size;	/* size of ra cache */
+	unsigned int	ra_depth[11];	/* number of times ra entry was found that deep
+					 * in the cache (10percentiles). [10] = not found */
+};
+
+/* thread usage wraps very million seconds (approx one fortnight) */
+#define	NFSD_USAGE_WRAP	(HZ*1000000)
+
+#ifdef __KERNEL__
+
+extern struct nfsd_stats	nfsdstats;
+extern struct svc_stat		nfsd_svcstats;
+
+void	nfsd_stat_init(void);
+void	nfsd_stat_shutdown(void);
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_NFSD_STATS_H */
diff --git a/include/linux/nfsd/syscall.h b/include/linux/nfsd/syscall.h
new file mode 100644
index 000000000000..e65c9db6d13f
--- /dev/null
+++ b/include/linux/nfsd/syscall.h
@@ -0,0 +1,125 @@
+/*
+ * include/linux/nfsd/syscall.h
+ *
+ * This file holds all declarations for the knfsd syscall interface.
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef NFSD_SYSCALL_H
+#define NFSD_SYSCALL_H
+
+#include <asm/types.h>
+#ifdef __KERNEL__
+# include <linux/config.h>
+# include <linux/types.h>
+# include <linux/in.h>
+#endif 
+#include <linux/posix_types.h>
+#include <linux/nfsd/const.h>
+#include <linux/nfsd/export.h>
+#include <linux/nfsd/nfsfh.h>
+#include <linux/nfsd/auth.h>
+
+/*
+ * Version of the syscall interface
+ */
+#define NFSCTL_VERSION		0x0201
+
+/*
+ * These are the commands understood by nfsctl().
+ */
+#define NFSCTL_SVC		0	/* This is a server process. */
+#define NFSCTL_ADDCLIENT	1	/* Add an NFS client. */
+#define NFSCTL_DELCLIENT	2	/* Remove an NFS client. */
+#define NFSCTL_EXPORT		3	/* export a file system. */
+#define NFSCTL_UNEXPORT		4	/* unexport a file system. */
+/*#define NFSCTL_UGIDUPDATE	5	/ * update a client's uid/gid map. DISCARDED */
+/*#define NFSCTL_GETFH		6	/ * get an fh by ino DISCARDED */
+#define NFSCTL_GETFD		7	/* get an fh by path (used by mountd) */
+#define	NFSCTL_GETFS		8	/* get an fh by path with max FH len */
+
+/* SVC */
+struct nfsctl_svc {
+	unsigned short		svc_port;
+	int			svc_nthreads;
+};
+
+/* ADDCLIENT/DELCLIENT */
+struct nfsctl_client {
+	char			cl_ident[NFSCLNT_IDMAX+1];
+	int			cl_naddr;
+	struct in_addr		cl_addrlist[NFSCLNT_ADDRMAX];
+	int			cl_fhkeytype;
+	int			cl_fhkeylen;
+	unsigned char		cl_fhkey[NFSCLNT_KEYMAX];
+};
+
+/* EXPORT/UNEXPORT */
+struct nfsctl_export {
+	char			ex_client[NFSCLNT_IDMAX+1];
+	char			ex_path[NFS_MAXPATHLEN+1];
+	__kernel_old_dev_t	ex_dev;
+	__kernel_ino_t		ex_ino;
+	int			ex_flags;
+	__kernel_uid_t		ex_anon_uid;
+	__kernel_gid_t		ex_anon_gid;
+};
+
+/* GETFD */
+struct nfsctl_fdparm {
+	struct sockaddr		gd_addr;
+	char			gd_path[NFS_MAXPATHLEN+1];
+	int			gd_version;
+};
+
+/* GETFS - GET Filehandle with Size */
+struct nfsctl_fsparm {
+	struct sockaddr		gd_addr;
+	char			gd_path[NFS_MAXPATHLEN+1];
+	int			gd_maxlen;
+};
+
+/*
+ * This is the argument union.
+ */
+struct nfsctl_arg {
+	int			ca_version;	/* safeguard */
+	union {
+		struct nfsctl_svc	u_svc;
+		struct nfsctl_client	u_client;
+		struct nfsctl_export	u_export;
+		struct nfsctl_fdparm	u_getfd;
+		struct nfsctl_fsparm	u_getfs;
+		/*
+		 * The following dummy member is needed to preserve binary compatibility
+		 * on platforms where alignof(void*)>alignof(int).  It's needed because
+		 * this union used to contain a member (u_umap) which contained a
+		 * pointer.
+		 */
+		void *u_ptr;
+	} u;
+#define ca_svc		u.u_svc
+#define ca_client	u.u_client
+#define ca_export	u.u_export
+#define ca_getfd	u.u_getfd
+#define	ca_getfs	u.u_getfs
+};
+
+union nfsctl_res {
+	__u8			cr_getfh[NFS_FHSIZE];
+	struct knfsd_fh		cr_getfs;
+};
+
+#ifdef __KERNEL__
+/*
+ * Kernel syscall implementation.
+ */
+extern int		exp_addclient(struct nfsctl_client *ncp);
+extern int		exp_delclient(struct nfsctl_client *ncp);
+extern int		exp_export(struct nfsctl_export *nxp);
+extern int		exp_unexport(struct nfsctl_export *nxp);
+
+#endif /* __KERNEL__ */
+
+#endif /* NFSD_SYSCALL_H */
diff --git a/include/linux/nfsd/xdr.h b/include/linux/nfsd/xdr.h
new file mode 100644
index 000000000000..ecccef777dae
--- /dev/null
+++ b/include/linux/nfsd/xdr.h
@@ -0,0 +1,172 @@
+/*
+ * linux/inxlude/linux/nfsd/xdr.h
+ *
+ * XDR types for nfsd. This is mainly a typing exercise.
+ */
+
+#ifndef LINUX_NFSD_H
+#define LINUX_NFSD_H
+
+#include <linux/fs.h>
+#include <linux/vfs.h>
+#include <linux/nfs.h>
+
+struct nfsd_fhandle {
+	struct svc_fh		fh;
+};
+
+struct nfsd_sattrargs {
+	struct svc_fh		fh;
+	struct iattr		attrs;
+};
+
+struct nfsd_diropargs {
+	struct svc_fh		fh;
+	char *			name;
+	int			len;
+};
+
+struct nfsd_readargs {
+	struct svc_fh		fh;
+	__u32			offset;
+	__u32			count;
+	struct kvec		vec[RPCSVC_MAXPAGES];
+	int			vlen;
+};
+
+struct nfsd_writeargs {
+	svc_fh			fh;
+	__u32			offset;
+	int			len;
+	struct kvec		vec[RPCSVC_MAXPAGES];
+	int			vlen;
+};
+
+struct nfsd_createargs {
+	struct svc_fh		fh;
+	char *			name;
+	int			len;
+	struct iattr		attrs;
+};
+
+struct nfsd_renameargs {
+	struct svc_fh		ffh;
+	char *			fname;
+	int			flen;
+	struct svc_fh		tfh;
+	char *			tname;
+	int			tlen;
+};
+
+struct nfsd_readlinkargs {
+	struct svc_fh		fh;
+	char *			buffer;
+};
+	
+struct nfsd_linkargs {
+	struct svc_fh		ffh;
+	struct svc_fh		tfh;
+	char *			tname;
+	int			tlen;
+};
+
+struct nfsd_symlinkargs {
+	struct svc_fh		ffh;
+	char *			fname;
+	int			flen;
+	char *			tname;
+	int			tlen;
+	struct iattr		attrs;
+};
+
+struct nfsd_readdirargs {
+	struct svc_fh		fh;
+	__u32			cookie;
+	__u32			count;
+	u32 *			buffer;
+};
+
+struct nfsd_attrstat {
+	struct svc_fh		fh;
+};
+
+struct nfsd_diropres  {
+	struct svc_fh		fh;
+};
+
+struct nfsd_readlinkres {
+	int			len;
+};
+
+struct nfsd_readres {
+	struct svc_fh		fh;
+	unsigned long		count;
+};
+
+struct nfsd_readdirres {
+	int			count;
+
+	struct readdir_cd	common;
+	u32 *			buffer;
+	int			buflen;
+	u32 *			offset;
+};
+
+struct nfsd_statfsres {
+	struct kstatfs		stats;
+};
+
+/*
+ * Storage requirements for XDR arguments and results.
+ */
+union nfsd_xdrstore {
+	struct nfsd_sattrargs	sattr;
+	struct nfsd_diropargs	dirop;
+	struct nfsd_readargs	read;
+	struct nfsd_writeargs	write;
+	struct nfsd_createargs	create;
+	struct nfsd_renameargs	rename;
+	struct nfsd_linkargs	link;
+	struct nfsd_symlinkargs	symlink;
+	struct nfsd_readdirargs	readdir;
+};
+
+#define NFS2_SVC_XDRSIZE	sizeof(union nfsd_xdrstore)
+
+
+int nfssvc_decode_void(struct svc_rqst *, u32 *, void *);
+int nfssvc_decode_fhandle(struct svc_rqst *, u32 *, struct nfsd_fhandle *);
+int nfssvc_decode_sattrargs(struct svc_rqst *, u32 *,
+				struct nfsd_sattrargs *);
+int nfssvc_decode_diropargs(struct svc_rqst *, u32 *,
+				struct nfsd_diropargs *);
+int nfssvc_decode_readargs(struct svc_rqst *, u32 *,
+				struct nfsd_readargs *);
+int nfssvc_decode_writeargs(struct svc_rqst *, u32 *,
+				struct nfsd_writeargs *);
+int nfssvc_decode_createargs(struct svc_rqst *, u32 *,
+				struct nfsd_createargs *);
+int nfssvc_decode_renameargs(struct svc_rqst *, u32 *,
+				struct nfsd_renameargs *);
+int nfssvc_decode_readlinkargs(struct svc_rqst *, u32 *,
+				struct nfsd_readlinkargs *);
+int nfssvc_decode_linkargs(struct svc_rqst *, u32 *,
+				struct nfsd_linkargs *);
+int nfssvc_decode_symlinkargs(struct svc_rqst *, u32 *,
+				struct nfsd_symlinkargs *);
+int nfssvc_decode_readdirargs(struct svc_rqst *, u32 *,
+				struct nfsd_readdirargs *);
+int nfssvc_encode_void(struct svc_rqst *, u32 *, void *);
+int nfssvc_encode_attrstat(struct svc_rqst *, u32 *, struct nfsd_attrstat *);
+int nfssvc_encode_diropres(struct svc_rqst *, u32 *, struct nfsd_diropres *);
+int nfssvc_encode_readlinkres(struct svc_rqst *, u32 *, struct nfsd_readlinkres *);
+int nfssvc_encode_readres(struct svc_rqst *, u32 *, struct nfsd_readres *);
+int nfssvc_encode_statfsres(struct svc_rqst *, u32 *, struct nfsd_statfsres *);
+int nfssvc_encode_readdirres(struct svc_rqst *, u32 *, struct nfsd_readdirres *);
+
+int nfssvc_encode_entry(struct readdir_cd *, const char *name,
+				int namlen, loff_t offset, ino_t ino, unsigned int);
+
+int nfssvc_release_fhandle(struct svc_rqst *, u32 *, struct nfsd_fhandle *);
+
+#endif /* LINUX_NFSD_H */
diff --git a/include/linux/nfsd/xdr3.h b/include/linux/nfsd/xdr3.h
new file mode 100644
index 000000000000..0ae9e0ef5f68
--- /dev/null
+++ b/include/linux/nfsd/xdr3.h
@@ -0,0 +1,321 @@
+/*
+ * linux/include/linux/nfsd/xdr3.h
+ *
+ * XDR types for NFSv3 in nfsd.
+ *
+ * Copyright (C) 1996-1998, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_NFSD_XDR3_H
+#define _LINUX_NFSD_XDR3_H
+
+#include <linux/nfsd/xdr.h>
+
+struct nfsd3_sattrargs {
+	struct svc_fh		fh;
+	struct iattr		attrs;
+	int			check_guard;
+	time_t			guardtime;
+};
+
+struct nfsd3_diropargs {
+	struct svc_fh		fh;
+	char *			name;
+	int			len;
+};
+
+struct nfsd3_accessargs {
+	struct svc_fh		fh;
+	unsigned int		access;
+};
+
+struct nfsd3_readargs {
+	struct svc_fh		fh;
+	__u64			offset;
+	__u32			count;
+	struct kvec		vec[RPCSVC_MAXPAGES];
+	int			vlen;
+};
+
+struct nfsd3_writeargs {
+	svc_fh			fh;
+	__u64			offset;
+	__u32			count;
+	int			stable;
+	int			len;
+	struct kvec		vec[RPCSVC_MAXPAGES];
+	int			vlen;
+};
+
+struct nfsd3_createargs {
+	struct svc_fh		fh;
+	char *			name;
+	int			len;
+	int			createmode;
+	struct iattr		attrs;
+	__u32 *			verf;
+};
+
+struct nfsd3_mknodargs {
+	struct svc_fh		fh;
+	char *			name;
+	int			len;
+	__u32			ftype;
+	__u32			major, minor;
+	struct iattr		attrs;
+};
+
+struct nfsd3_renameargs {
+	struct svc_fh		ffh;
+	char *			fname;
+	int			flen;
+	struct svc_fh		tfh;
+	char *			tname;
+	int			tlen;
+};
+
+struct nfsd3_readlinkargs {
+	struct svc_fh		fh;
+	char *			buffer;
+};
+
+struct nfsd3_linkargs {
+	struct svc_fh		ffh;
+	struct svc_fh		tfh;
+	char *			tname;
+	int			tlen;
+};
+
+struct nfsd3_symlinkargs {
+	struct svc_fh		ffh;
+	char *			fname;
+	int			flen;
+	char *			tname;
+	int			tlen;
+	struct iattr		attrs;
+};
+
+struct nfsd3_readdirargs {
+	struct svc_fh		fh;
+	__u64			cookie;
+	__u32			dircount;
+	__u32			count;
+	__u32 *			verf;
+	u32 *			buffer;
+};
+
+struct nfsd3_commitargs {
+	struct svc_fh		fh;
+	__u64			offset;
+	__u32			count;
+};
+
+struct nfsd3_attrstat {
+	__u32			status;
+	struct svc_fh		fh;
+};
+
+/* LOOKUP, CREATE, MKDIR, SYMLINK, MKNOD */
+struct nfsd3_diropres  {
+	__u32			status;
+	struct svc_fh		dirfh;
+	struct svc_fh		fh;
+};
+
+struct nfsd3_accessres {
+	__u32			status;
+	struct svc_fh		fh;
+	__u32			access;
+};
+
+struct nfsd3_readlinkres {
+	__u32			status;
+	struct svc_fh		fh;
+	__u32			len;
+};
+
+struct nfsd3_readres {
+	__u32			status;
+	struct svc_fh		fh;
+	unsigned long		count;
+	int			eof;
+};
+
+struct nfsd3_writeres {
+	__u32			status;
+	struct svc_fh		fh;
+	unsigned long		count;
+	int			committed;
+};
+
+struct nfsd3_renameres {
+	__u32			status;
+	struct svc_fh		ffh;
+	struct svc_fh		tfh;
+};
+
+struct nfsd3_linkres {
+	__u32			status;
+	struct svc_fh		tfh;
+	struct svc_fh		fh;
+};
+
+struct nfsd3_readdirres {
+	__u32			status;
+	struct svc_fh		fh;
+	int			count;
+	__u32			verf[2];
+
+	struct readdir_cd	common;
+	u32 *			buffer;
+	int			buflen;
+	u32 *			offset;
+	u32 *			offset1;
+	struct svc_rqst *	rqstp;
+
+};
+
+struct nfsd3_fsstatres {
+	__u32			status;
+	struct kstatfs		stats;
+	__u32			invarsec;
+};
+
+struct nfsd3_fsinfores {
+	__u32			status;
+	__u32			f_rtmax;
+	__u32			f_rtpref;
+	__u32			f_rtmult;
+	__u32			f_wtmax;
+	__u32			f_wtpref;
+	__u32			f_wtmult;
+	__u32			f_dtpref;
+	__u64			f_maxfilesize;
+	__u32			f_properties;
+};
+
+struct nfsd3_pathconfres {
+	__u32			status;
+	__u32			p_link_max;
+	__u32			p_name_max;
+	__u32			p_no_trunc;
+	__u32			p_chown_restricted;
+	__u32			p_case_insensitive;
+	__u32			p_case_preserving;
+};
+
+struct nfsd3_commitres {
+	__u32			status;
+	struct svc_fh		fh;
+};
+
+/* dummy type for release */
+struct nfsd3_fhandle_pair {
+	__u32			dummy;
+	struct svc_fh		fh1;
+	struct svc_fh		fh2;
+};
+
+/*
+ * Storage requirements for XDR arguments and results.
+ */
+union nfsd3_xdrstore {
+	struct nfsd3_sattrargs		sattrargs;
+	struct nfsd3_diropargs		diropargs;
+	struct nfsd3_readargs		readargs;
+	struct nfsd3_writeargs		writeargs;
+	struct nfsd3_createargs		createargs;
+	struct nfsd3_renameargs		renameargs;
+	struct nfsd3_linkargs		linkargs;
+	struct nfsd3_symlinkargs	symlinkargs;
+	struct nfsd3_readdirargs	readdirargs;
+	struct nfsd3_diropres 		diropres;
+	struct nfsd3_accessres		accessres;
+	struct nfsd3_readlinkres	readlinkres;
+	struct nfsd3_readres		readres;
+	struct nfsd3_writeres		writeres;
+	struct nfsd3_renameres		renameres;
+	struct nfsd3_linkres		linkres;
+	struct nfsd3_readdirres		readdirres;
+	struct nfsd3_fsstatres		fsstatres;
+	struct nfsd3_fsinfores		fsinfores;
+	struct nfsd3_pathconfres	pathconfres;
+	struct nfsd3_commitres		commitres;
+};
+
+#define NFS3_SVC_XDRSIZE		sizeof(union nfsd3_xdrstore)
+
+int nfs3svc_decode_fhandle(struct svc_rqst *, u32 *, struct nfsd_fhandle *);
+int nfs3svc_decode_sattrargs(struct svc_rqst *, u32 *,
+				struct nfsd3_sattrargs *);
+int nfs3svc_decode_diropargs(struct svc_rqst *, u32 *,
+				struct nfsd3_diropargs *);
+int nfs3svc_decode_accessargs(struct svc_rqst *, u32 *,
+				struct nfsd3_accessargs *);
+int nfs3svc_decode_readargs(struct svc_rqst *, u32 *,
+				struct nfsd3_readargs *);
+int nfs3svc_decode_writeargs(struct svc_rqst *, u32 *,
+				struct nfsd3_writeargs *);
+int nfs3svc_decode_createargs(struct svc_rqst *, u32 *,
+				struct nfsd3_createargs *);
+int nfs3svc_decode_mkdirargs(struct svc_rqst *, u32 *,
+				struct nfsd3_createargs *);
+int nfs3svc_decode_mknodargs(struct svc_rqst *, u32 *,
+				struct nfsd3_mknodargs *);
+int nfs3svc_decode_renameargs(struct svc_rqst *, u32 *,
+				struct nfsd3_renameargs *);
+int nfs3svc_decode_readlinkargs(struct svc_rqst *, u32 *,
+				struct nfsd3_readlinkargs *);
+int nfs3svc_decode_linkargs(struct svc_rqst *, u32 *,
+				struct nfsd3_linkargs *);
+int nfs3svc_decode_symlinkargs(struct svc_rqst *, u32 *,
+				struct nfsd3_symlinkargs *);
+int nfs3svc_decode_readdirargs(struct svc_rqst *, u32 *,
+				struct nfsd3_readdirargs *);
+int nfs3svc_decode_readdirplusargs(struct svc_rqst *, u32 *,
+				struct nfsd3_readdirargs *);
+int nfs3svc_decode_commitargs(struct svc_rqst *, u32 *,
+				struct nfsd3_commitargs *);
+int nfs3svc_encode_voidres(struct svc_rqst *, u32 *, void *);
+int nfs3svc_encode_attrstat(struct svc_rqst *, u32 *,
+				struct nfsd3_attrstat *);
+int nfs3svc_encode_wccstat(struct svc_rqst *, u32 *,
+				struct nfsd3_attrstat *);
+int nfs3svc_encode_diropres(struct svc_rqst *, u32 *,
+				struct nfsd3_diropres *);
+int nfs3svc_encode_accessres(struct svc_rqst *, u32 *,
+				struct nfsd3_accessres *);
+int nfs3svc_encode_readlinkres(struct svc_rqst *, u32 *,
+				struct nfsd3_readlinkres *);
+int nfs3svc_encode_readres(struct svc_rqst *, u32 *, struct nfsd3_readres *);
+int nfs3svc_encode_writeres(struct svc_rqst *, u32 *, struct nfsd3_writeres *);
+int nfs3svc_encode_createres(struct svc_rqst *, u32 *,
+				struct nfsd3_diropres *);
+int nfs3svc_encode_renameres(struct svc_rqst *, u32 *,
+				struct nfsd3_renameres *);
+int nfs3svc_encode_linkres(struct svc_rqst *, u32 *,
+				struct nfsd3_linkres *);
+int nfs3svc_encode_readdirres(struct svc_rqst *, u32 *,
+				struct nfsd3_readdirres *);
+int nfs3svc_encode_fsstatres(struct svc_rqst *, u32 *,
+				struct nfsd3_fsstatres *);
+int nfs3svc_encode_fsinfores(struct svc_rqst *, u32 *,
+				struct nfsd3_fsinfores *);
+int nfs3svc_encode_pathconfres(struct svc_rqst *, u32 *,
+				struct nfsd3_pathconfres *);
+int nfs3svc_encode_commitres(struct svc_rqst *, u32 *,
+				struct nfsd3_commitres *);
+
+int nfs3svc_release_fhandle(struct svc_rqst *, u32 *,
+				struct nfsd3_attrstat *);
+int nfs3svc_release_fhandle2(struct svc_rqst *, u32 *,
+				struct nfsd3_fhandle_pair *);
+int nfs3svc_encode_entry(struct readdir_cd *, const char *name,
+				int namlen, loff_t offset, ino_t ino,
+				unsigned int);
+int nfs3svc_encode_entry_plus(struct readdir_cd *, const char *name,
+				int namlen, loff_t offset, ino_t ino,
+				unsigned int);
+
+
+#endif /* _LINUX_NFSD_XDR3_H */
diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h
new file mode 100644
index 000000000000..a1f5ad0be1bf
--- /dev/null
+++ b/include/linux/nfsd/xdr4.h
@@ -0,0 +1,463 @@
+/*
+ *  include/linux/nfsd/xdr4.h
+ *
+ *  Server-side types for NFSv4.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _LINUX_NFSD_XDR4_H
+#define _LINUX_NFSD_XDR4_H
+
+#include <linux/nfs4.h>
+
+#define NFSD4_MAX_TAGLEN	128
+#define XDR_LEN(n)                     (((n) + 3) & ~3)
+
+struct nfsd4_change_info {
+	u32		atomic;
+	u32		before_ctime_sec;
+	u32		before_ctime_nsec;
+	u32		after_ctime_sec;
+	u32		after_ctime_nsec;
+};
+
+struct nfsd4_access {
+	u32		ac_req_access;      /* request */
+	u32		ac_supported;       /* response */
+	u32		ac_resp_access;     /* response */
+};
+
+struct nfsd4_close {
+	u32		cl_seqid;           /* request */
+	stateid_t	cl_stateid;         /* request+response */
+	struct nfs4_stateowner * cl_stateowner;	/* response */
+};
+
+struct nfsd4_commit {
+	u64		co_offset;          /* request */
+	u32		co_count;           /* request */
+	nfs4_verifier	co_verf;            /* response */
+};
+
+struct nfsd4_create {
+	u32		cr_namelen;         /* request */
+	char *		cr_name;            /* request */
+	u32		cr_type;            /* request */
+	union {                             /* request */
+		struct {
+			u32 namelen;
+			char *name;
+		} link;   /* NF4LNK */
+		struct {
+			u32 specdata1;
+			u32 specdata2;
+		} dev;    /* NF4BLK, NF4CHR */
+	} u;
+	u32		cr_bmval[2];        /* request */
+	struct iattr	cr_iattr;           /* request */
+	struct nfsd4_change_info  cr_cinfo; /* response */
+	struct nfs4_acl *cr_acl;
+};
+#define cr_linklen	u.link.namelen
+#define cr_linkname	u.link.name
+#define cr_specdata1	u.dev.specdata1
+#define cr_specdata2	u.dev.specdata2
+
+struct nfsd4_delegreturn {
+	stateid_t	dr_stateid;
+};
+
+struct nfsd4_getattr {
+	u32		ga_bmval[2];        /* request */
+	struct svc_fh	*ga_fhp;            /* response */
+};
+
+struct nfsd4_link {
+	u32		li_namelen;         /* request */
+	char *		li_name;            /* request */
+	struct nfsd4_change_info  li_cinfo; /* response */
+};
+
+struct nfsd4_lock_denied {
+	clientid_t	ld_clientid;
+	struct nfs4_stateowner   *ld_sop;
+	u64             ld_start;
+	u64             ld_length;
+	u32             ld_type;
+};
+
+struct nfsd4_lock {
+	/* request */
+	u32             lk_type;
+	u32             lk_reclaim;         /* boolean */
+	u64             lk_offset;
+	u64             lk_length;
+	u32             lk_is_new;
+	union {
+		struct {
+			u32             open_seqid;
+			stateid_t       open_stateid;
+			u32             lock_seqid;
+			clientid_t      clientid;
+			struct xdr_netobj owner;
+		} new;
+		struct {
+			stateid_t       lock_stateid;
+			u32             lock_seqid;
+		} old;
+	} v;
+
+	/* response */
+	union {
+		struct {
+			stateid_t               stateid;
+		} ok;
+		struct nfsd4_lock_denied        denied;
+	} u;
+
+	struct nfs4_stateowner *lk_stateowner;
+};
+#define lk_new_open_seqid       v.new.open_seqid
+#define lk_new_open_stateid     v.new.open_stateid
+#define lk_new_lock_seqid       v.new.lock_seqid
+#define lk_new_clientid         v.new.clientid
+#define lk_new_owner            v.new.owner
+#define lk_old_lock_stateid     v.old.lock_stateid
+#define lk_old_lock_seqid       v.old.lock_seqid
+
+#define lk_rflags       u.ok.rflags
+#define lk_resp_stateid u.ok.stateid
+#define lk_denied       u.denied
+
+
+struct nfsd4_lockt {
+	u32				lt_type;
+	clientid_t			lt_clientid;
+	struct xdr_netobj		lt_owner;
+	u64				lt_offset;
+	u64				lt_length;
+	struct nfs4_stateowner * 	lt_stateowner;
+	struct nfsd4_lock_denied  	lt_denied;
+};
+
+ 
+struct nfsd4_locku {
+	u32             lu_type;
+	u32             lu_seqid;
+	stateid_t       lu_stateid;
+	u64             lu_offset;
+	u64             lu_length;
+	struct nfs4_stateowner  *lu_stateowner;
+};
+
+
+struct nfsd4_lookup {
+	u32		lo_len;             /* request */
+	char *		lo_name;            /* request */
+};
+
+struct nfsd4_putfh {
+	u32		pf_fhlen;           /* request */
+	char		*pf_fhval;          /* request */
+};
+
+struct nfsd4_open {
+	u32		op_claim_type;      /* request */
+	struct xdr_netobj op_fname;	    /* request - everything but CLAIM_PREV */
+	u32		op_delegate_type;   /* request - CLAIM_PREV only */
+	stateid_t       op_delegate_stateid; /* request - response */
+	u32		op_create;     	    /* request */
+	u32		op_createmode;      /* request */
+	u32		op_bmval[2];        /* request */
+	union {                             /* request */
+		struct iattr	iattr;                      /* UNCHECKED4,GUARDED4 */
+		nfs4_verifier	verf;                                /* EXCLUSIVE4 */
+	} u;
+	clientid_t	op_clientid;        /* request */
+	struct xdr_netobj op_owner;           /* request */
+	u32		op_seqid;           /* request */
+	u32		op_share_access;    /* request */
+	u32		op_share_deny;      /* request */
+	stateid_t	op_stateid;         /* response */
+	struct nfsd4_change_info  op_cinfo; /* response */
+	u32		op_rflags;          /* response */
+	int		op_truncate;        /* used during processing */
+	struct nfs4_stateowner *op_stateowner; /* used during processing */
+	struct nfs4_acl *op_acl;
+};
+#define op_iattr	u.iattr
+#define op_verf		u.verf
+
+struct nfsd4_open_confirm {
+	stateid_t	oc_req_stateid		/* request */;
+	u32		oc_seqid    		/* request */;
+	stateid_t	oc_resp_stateid		/* response */;
+	struct nfs4_stateowner * oc_stateowner;	/* response */
+};
+
+struct nfsd4_open_downgrade {
+	stateid_t       od_stateid;
+	u32             od_seqid;
+	u32             od_share_access;
+	u32             od_share_deny;
+	struct nfs4_stateowner *od_stateowner;
+};
+
+
+struct nfsd4_read {
+	stateid_t	rd_stateid;         /* request */
+	u64		rd_offset;          /* request */
+	u32		rd_length;          /* request */
+	struct kvec	rd_iov[RPCSVC_MAXPAGES];
+	int		rd_vlen;
+	struct file     *rd_filp;
+	
+	struct svc_rqst *rd_rqstp;          /* response */
+	struct svc_fh * rd_fhp;             /* response */
+};
+
+struct nfsd4_readdir {
+	u64		rd_cookie;          /* request */
+	nfs4_verifier	rd_verf;            /* request */
+	u32		rd_dircount;        /* request */
+	u32		rd_maxcount;        /* request */
+	u32		rd_bmval[2];        /* request */
+	struct svc_rqst *rd_rqstp;          /* response */
+	struct svc_fh * rd_fhp;             /* response */
+
+	struct readdir_cd	common;
+	u32 *			buffer;
+	int			buflen;
+	u32 *			offset;
+};
+
+struct nfsd4_release_lockowner {
+	clientid_t        rl_clientid;
+	struct xdr_netobj rl_owner;
+};
+struct nfsd4_readlink {
+	struct svc_rqst *rl_rqstp;          /* request */
+	struct svc_fh *	rl_fhp;             /* request */
+};
+
+struct nfsd4_remove {
+	u32		rm_namelen;         /* request */
+	char *		rm_name;            /* request */
+	struct nfsd4_change_info  rm_cinfo; /* response */
+};
+
+struct nfsd4_rename {
+	u32		rn_snamelen;        /* request */
+	char *		rn_sname;           /* request */
+	u32		rn_tnamelen;        /* request */
+	char *		rn_tname;           /* request */
+	struct nfsd4_change_info  rn_sinfo; /* response */
+	struct nfsd4_change_info  rn_tinfo; /* response */
+};
+
+struct nfsd4_setattr {
+	stateid_t	sa_stateid;         /* request */
+	u32		sa_bmval[2];        /* request */
+	struct iattr	sa_iattr;           /* request */
+	struct nfs4_acl *sa_acl;
+};
+
+struct nfsd4_setclientid {
+	nfs4_verifier	se_verf;            /* request */
+	u32		se_namelen;         /* request */
+	char *		se_name;            /* request */
+	u32		se_callback_prog;   /* request */
+	u32		se_callback_netid_len;  /* request */
+	char *		se_callback_netid_val;  /* request */
+	u32		se_callback_addr_len;   /* request */
+	char *		se_callback_addr_val;   /* request */
+	u32		se_callback_ident;  /* request */
+	clientid_t	se_clientid;        /* response */
+	nfs4_verifier	se_confirm;         /* response */
+};
+
+struct nfsd4_setclientid_confirm {
+	clientid_t	sc_clientid;
+	nfs4_verifier	sc_confirm;
+};
+
+/* also used for NVERIFY */
+struct nfsd4_verify {
+	u32		ve_bmval[2];        /* request */
+	u32		ve_attrlen;         /* request */
+	char *		ve_attrval;         /* request */
+};
+
+struct nfsd4_write {
+	stateid_t	wr_stateid;         /* request */
+	u64		wr_offset;          /* request */
+	u32		wr_stable_how;      /* request */
+	u32		wr_buflen;          /* request */
+	struct kvec	wr_vec[RPCSVC_MAXPAGES]; /* request */
+	int		wr_vlen;
+
+	u32		wr_bytes_written;   /* response */
+	u32		wr_how_written;     /* response */
+	nfs4_verifier	wr_verifier;        /* response */
+};
+
+struct nfsd4_op {
+	int					opnum;
+	int					status;
+	union {
+		struct nfsd4_access		access;
+		struct nfsd4_close		close;
+		struct nfsd4_commit		commit;
+		struct nfsd4_create		create;
+		struct nfsd4_delegreturn	delegreturn;
+		struct nfsd4_getattr		getattr;
+		struct svc_fh *			getfh;
+		struct nfsd4_link		link;
+		struct nfsd4_lock		lock;
+		struct nfsd4_lockt		lockt;
+		struct nfsd4_locku		locku;
+		struct nfsd4_lookup		lookup;
+		struct nfsd4_verify		nverify;
+		struct nfsd4_open		open;
+		struct nfsd4_open_confirm	open_confirm;
+		struct nfsd4_open_downgrade	open_downgrade;
+		struct nfsd4_putfh		putfh;
+		struct nfsd4_read		read;
+		struct nfsd4_readdir		readdir;
+		struct nfsd4_readlink		readlink;
+		struct nfsd4_remove		remove;
+		struct nfsd4_rename		rename;
+		clientid_t			renew;
+		struct nfsd4_setattr		setattr;
+		struct nfsd4_setclientid	setclientid;
+		struct nfsd4_setclientid_confirm setclientid_confirm;
+		struct nfsd4_verify		verify;
+		struct nfsd4_write		write;
+		struct nfsd4_release_lockowner	release_lockowner;
+	} u;
+	struct nfs4_replay *			replay;
+};
+
+struct nfsd4_compoundargs {
+	/* scratch variables for XDR decode */
+	u32 *				p;
+	u32 *				end;
+	struct page **			pagelist;
+	int				pagelen;
+	u32				tmp[8];
+	u32 *				tmpp;
+	struct tmpbuf {
+		struct tmpbuf *next;
+		void (*release)(const void *);
+		void *buf;
+	}				*to_free;
+
+	struct svc_rqst			*rqstp;
+
+	u32				taglen;
+	char *				tag;
+	u32				minorversion;
+	u32				opcnt;
+	struct nfsd4_op			*ops;
+	struct nfsd4_op			iops[8];
+};
+
+struct nfsd4_compoundres {
+	/* scratch variables for XDR encode */
+	u32 *				p;
+	u32 *				end;
+	struct xdr_buf *		xbuf;
+	struct svc_rqst *		rqstp;
+
+	u32				taglen;
+	char *				tag;
+	u32				opcnt;
+	u32 *				tagp; /* where to encode tag and  opcount */
+};
+
+#define NFS4_SVC_XDRSIZE		sizeof(struct nfsd4_compoundargs)
+
+static inline void
+set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
+{
+	BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
+	cinfo->atomic = 1;
+	cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+	cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+	cinfo->after_ctime_sec = fhp->fh_post_ctime.tv_sec;
+	cinfo->after_ctime_nsec = fhp->fh_post_ctime.tv_nsec;
+}
+
+int nfs4svc_encode_voidres(struct svc_rqst *, u32 *, void *);
+int nfs4svc_decode_compoundargs(struct svc_rqst *, u32 *, 
+		struct nfsd4_compoundargs *);
+int nfs4svc_encode_compoundres(struct svc_rqst *, u32 *, 
+		struct nfsd4_compoundres *);
+void nfsd4_encode_operation(struct nfsd4_compoundres *, struct nfsd4_op *);
+void nfsd4_encode_replay(struct nfsd4_compoundres *resp, struct nfsd4_op *op);
+int nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp,
+		       struct dentry *dentry, u32 *buffer, int *countp, 
+		       u32 *bmval, struct svc_rqst *);
+extern int nfsd4_setclientid(struct svc_rqst *rqstp, 
+		struct nfsd4_setclientid *setclid);
+extern int nfsd4_setclientid_confirm(struct svc_rqst *rqstp, 
+		struct nfsd4_setclientid_confirm *setclientid_confirm);
+extern int nfsd4_process_open1(struct nfsd4_open *open);
+extern int nfsd4_process_open2(struct svc_rqst *rqstp, 
+		struct svc_fh *current_fh, struct nfsd4_open *open);
+extern int nfsd4_open_confirm(struct svc_rqst *rqstp, 
+		struct svc_fh *current_fh, struct nfsd4_open_confirm *oc);
+extern  int nfsd4_close(struct svc_rqst *rqstp, struct svc_fh *current_fh, 
+		struct nfsd4_close *close);
+extern int nfsd4_open_downgrade(struct svc_rqst *rqstp, 
+		struct svc_fh *current_fh, struct nfsd4_open_downgrade *od);
+extern int nfsd4_lock(struct svc_rqst *rqstp, struct svc_fh *current_fh, 
+		struct nfsd4_lock *lock);
+extern int nfsd4_lockt(struct svc_rqst *rqstp, struct svc_fh *current_fh, 
+		struct nfsd4_lockt *lockt);
+extern int nfsd4_locku(struct svc_rqst *rqstp, struct svc_fh *current_fh, 
+		struct nfsd4_locku *locku);
+extern int
+nfsd4_release_lockowner(struct svc_rqst *rqstp,
+		struct nfsd4_release_lockowner *rlockowner);
+extern void nfsd4_release_compoundargs(struct nfsd4_compoundargs *);
+extern int nfsd4_delegreturn(struct svc_rqst *rqstp,
+		struct svc_fh *current_fh, struct nfsd4_delegreturn *dr);
+#endif
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfsd_idmap.h b/include/linux/nfsd_idmap.h
new file mode 100644
index 000000000000..9bb7f30e923b
--- /dev/null
+++ b/include/linux/nfsd_idmap.h
@@ -0,0 +1,54 @@
+/*
+ *  include/linux/nfsd_idmap.h
+ *
+ *  Mapping of UID to name and vice versa.
+ *
+ *  Copyright (c) 2002, 2003 The Regents of the University of
+ *  Michigan.  All rights reserved.
+> *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_NFSD_IDMAP_H
+#define LINUX_NFSD_IDMAP_H
+
+#include <linux/in.h>
+#include <linux/sunrpc/svc.h>
+
+/* XXX from linux/nfs_idmap.h */
+#define IDMAP_NAMESZ 128
+
+void nfsd_idmap_init(void);
+void nfsd_idmap_shutdown(void);
+
+int nfsd_map_name_to_uid(struct svc_rqst *, const char *, size_t, __u32 *);
+int nfsd_map_name_to_gid(struct svc_rqst *, const char *, size_t, __u32 *);
+int nfsd_map_uid_to_name(struct svc_rqst *, __u32, char *);
+int nfsd_map_gid_to_name(struct svc_rqst *, __u32, char *);
+
+#endif /* LINUX_NFSD_IDMAP_H */
diff --git a/include/linux/nls.h b/include/linux/nls.h
new file mode 100644
index 000000000000..816c04ad7381
--- /dev/null
+++ b/include/linux/nls.h
@@ -0,0 +1,64 @@
+#ifndef _LINUX_NLS_H
+#define _LINUX_NLS_H
+
+#include <linux/init.h>
+
+/* unicode character */
+typedef __u16 wchar_t;
+
+struct nls_table {
+	char *charset;
+	char *alias;
+	int (*uni2char) (wchar_t uni, unsigned char *out, int boundlen);
+	int (*char2uni) (const unsigned char *rawstring, int boundlen,
+			 wchar_t *uni);
+	unsigned char *charset2lower;
+	unsigned char *charset2upper;
+	struct module *owner;
+	struct nls_table *next;
+};
+
+/* this value hold the maximum octet of charset */
+#define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
+
+/* nls.c */
+extern int register_nls(struct nls_table *);
+extern int unregister_nls(struct nls_table *);
+extern struct nls_table *load_nls(char *);
+extern void unload_nls(struct nls_table *);
+extern struct nls_table *load_nls_default(void);
+
+extern int utf8_mbtowc(wchar_t *, const __u8 *, int);
+extern int utf8_mbstowcs(wchar_t *, const __u8 *, int);
+extern int utf8_wctomb(__u8 *, wchar_t, int);
+extern int utf8_wcstombs(__u8 *, const wchar_t *, int);
+
+static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
+{
+	unsigned char nc = t->charset2lower[c];
+
+	return nc ? nc : c;
+}
+
+static inline unsigned char nls_toupper(struct nls_table *t, unsigned char c)
+{
+	unsigned char nc = t->charset2upper[c];
+
+	return nc ? nc : c;
+}
+
+static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
+		const unsigned char *s2, int len)
+{
+	while (len--) {
+		if (nls_tolower(t, *s1++) != nls_tolower(t, *s2++))
+			return 1;
+	}
+
+	return 0;
+}
+
+#define MODULE_ALIAS_NLS(name)	MODULE_ALIAS("nls_" __stringify(name))
+
+#endif /* _LINUX_NLS_H */
+
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
new file mode 100644
index 000000000000..c8f4d2f627d7
--- /dev/null
+++ b/include/linux/nmi.h
@@ -0,0 +1,22 @@
+/*
+ *  linux/include/linux/nmi.h
+ */
+#ifndef LINUX_NMI_H
+#define LINUX_NMI_H
+
+#include <asm/irq.h>
+
+/**
+ * touch_nmi_watchdog - restart NMI watchdog timeout.
+ * 
+ * If the architecture supports the NMI watchdog, touch_nmi_watchdog()
+ * may be used to reset the timeout - for code which intentionally
+ * disables interrupts for a long time. This call is stateless.
+ */
+#ifdef ARCH_HAS_NMI_WATCHDOG
+extern void touch_nmi_watchdog(void);
+#else
+# define touch_nmi_watchdog() do { } while(0)
+#endif
+
+#endif
diff --git a/include/linux/node.h b/include/linux/node.h
new file mode 100644
index 000000000000..6e0a697e594e
--- /dev/null
+++ b/include/linux/node.h
@@ -0,0 +1,33 @@
+/*
+ * include/linux/node.h - generic node definition
+ *
+ * This is mainly for topological representation. We define the 
+ * basic 'struct node' here, which can be embedded in per-arch 
+ * definitions of processors.
+ *
+ * Basic handling of the devices is done in drivers/base/node.c
+ * and system devices are handled in drivers/base/sys.c. 
+ *
+ * Nodes are exported via driverfs in the class/node/devices/
+ * directory. 
+ *
+ * Per-node interfaces can be implemented using a struct device_interface. 
+ * See the following for how to do this: 
+ * - drivers/base/intf.c 
+ * - Documentation/driver-model/interface.txt
+ */
+#ifndef _LINUX_NODE_H_
+#define _LINUX_NODE_H_
+
+#include <linux/sysdev.h>
+#include <linux/cpumask.h>
+
+struct node {
+	struct sys_device	sysdev;
+};
+
+extern int register_node(struct node *, int, struct node *);
+
+#define to_node(sys_device) container_of(sys_device, struct node, sysdev)
+
+#endif /* _LINUX_NODE_H_ */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
new file mode 100644
index 000000000000..e96fe9062500
--- /dev/null
+++ b/include/linux/nodemask.h
@@ -0,0 +1,356 @@
+#ifndef __LINUX_NODEMASK_H
+#define __LINUX_NODEMASK_H
+
+/*
+ * Nodemasks provide a bitmap suitable for representing the
+ * set of Node's in a system, one bit position per Node number.
+ *
+ * See detailed comments in the file linux/bitmap.h describing the
+ * data type on which these nodemasks are based.
+ *
+ * For details of nodemask_scnprintf() and nodemask_parse(),
+ * see bitmap_scnprintf() and bitmap_parse() in lib/bitmap.c.
+ * For details of nodelist_scnprintf() and nodelist_parse(), see
+ * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
+ *
+ * The available nodemask operations are:
+ *
+ * void node_set(node, mask)		turn on bit 'node' in mask
+ * void node_clear(node, mask)		turn off bit 'node' in mask
+ * void nodes_setall(mask)		set all bits
+ * void nodes_clear(mask)		clear all bits
+ * int node_isset(node, mask)		true iff bit 'node' set in mask
+ * int node_test_and_set(node, mask)	test and set bit 'node' in mask
+ *
+ * void nodes_and(dst, src1, src2)	dst = src1 & src2  [intersection]
+ * void nodes_or(dst, src1, src2)	dst = src1 | src2  [union]
+ * void nodes_xor(dst, src1, src2)	dst = src1 ^ src2
+ * void nodes_andnot(dst, src1, src2)	dst = src1 & ~src2
+ * void nodes_complement(dst, src)	dst = ~src
+ *
+ * int nodes_equal(mask1, mask2)	Does mask1 == mask2?
+ * int nodes_intersects(mask1, mask2)	Do mask1 and mask2 intersect?
+ * int nodes_subset(mask1, mask2)	Is mask1 a subset of mask2?
+ * int nodes_empty(mask)		Is mask empty (no bits sets)?
+ * int nodes_full(mask)			Is mask full (all bits sets)?
+ * int nodes_weight(mask)		Hamming weight - number of set bits
+ *
+ * void nodes_shift_right(dst, src, n)	Shift right
+ * void nodes_shift_left(dst, src, n)	Shift left
+ *
+ * int first_node(mask)			Number lowest set bit, or MAX_NUMNODES
+ * int next_node(node, mask)		Next node past 'node', or MAX_NUMNODES
+ * int first_unset_node(mask)		First node not set in mask, or 
+ *					MAX_NUMNODES.
+ *
+ * nodemask_t nodemask_of_node(node)	Return nodemask with bit 'node' set
+ * NODE_MASK_ALL			Initializer - all bits set
+ * NODE_MASK_NONE			Initializer - no bits set
+ * unsigned long *nodes_addr(mask)	Array of unsigned long's in mask
+ *
+ * int nodemask_scnprintf(buf, len, mask) Format nodemask for printing
+ * int nodemask_parse(ubuf, ulen, mask)	Parse ascii string as nodemask
+ * int nodelist_scnprintf(buf, len, mask) Format nodemask as list for printing
+ * int nodelist_parse(buf, map)		Parse ascii string as nodelist
+ *
+ * for_each_node_mask(node, mask)	for-loop node over mask
+ *
+ * int num_online_nodes()		Number of online Nodes
+ * int num_possible_nodes()		Number of all possible Nodes
+ *
+ * int node_online(node)		Is some node online?
+ * int node_possible(node)		Is some node possible?
+ *
+ * int any_online_node(mask)		First online node in mask
+ *
+ * node_set_online(node)		set bit 'node' in node_online_map
+ * node_set_offline(node)		clear bit 'node' in node_online_map
+ *
+ * for_each_node(node)			for-loop node over node_possible_map
+ * for_each_online_node(node)		for-loop node over node_online_map
+ *
+ * Subtlety:
+ * 1) The 'type-checked' form of node_isset() causes gcc (3.3.2, anyway)
+ *    to generate slightly worse code.  So use a simple one-line #define
+ *    for node_isset(), instead of wrapping an inline inside a macro, the
+ *    way we do the other calls.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/bitmap.h>
+#include <linux/numa.h>
+#include <asm/bug.h>
+
+typedef struct { DECLARE_BITMAP(bits, MAX_NUMNODES); } nodemask_t;
+extern nodemask_t _unused_nodemask_arg_;
+
+#define node_set(node, dst) __node_set((node), &(dst))
+static inline void __node_set(int node, volatile nodemask_t *dstp)
+{
+	set_bit(node, dstp->bits);
+}
+
+#define node_clear(node, dst) __node_clear((node), &(dst))
+static inline void __node_clear(int node, volatile nodemask_t *dstp)
+{
+	clear_bit(node, dstp->bits);
+}
+
+#define nodes_setall(dst) __nodes_setall(&(dst), MAX_NUMNODES)
+static inline void __nodes_setall(nodemask_t *dstp, int nbits)
+{
+	bitmap_fill(dstp->bits, nbits);
+}
+
+#define nodes_clear(dst) __nodes_clear(&(dst), MAX_NUMNODES)
+static inline void __nodes_clear(nodemask_t *dstp, int nbits)
+{
+	bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define node_isset(node, nodemask) test_bit((node), (nodemask).bits)
+
+#define node_test_and_set(node, nodemask) \
+			__node_test_and_set((node), &(nodemask))
+static inline int __node_test_and_set(int node, nodemask_t *addr)
+{
+	return test_and_set_bit(node, addr->bits);
+}
+
+#define nodes_and(dst, src1, src2) \
+			__nodes_and(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_and(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_or(dst, src1, src2) \
+			__nodes_or(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_or(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_xor(dst, src1, src2) \
+			__nodes_xor(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_xor(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_andnot(dst, src1, src2) \
+			__nodes_andnot(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_andnot(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_complement(dst, src) \
+			__nodes_complement(&(dst), &(src), MAX_NUMNODES)
+static inline void __nodes_complement(nodemask_t *dstp,
+					const nodemask_t *srcp, int nbits)
+{
+	bitmap_complement(dstp->bits, srcp->bits, nbits);
+}
+
+#define nodes_equal(src1, src2) \
+			__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_equal(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_intersects(src1, src2) \
+			__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_intersects(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_subset(src1, src2) \
+			__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_subset(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
+static inline int __nodes_empty(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_empty(srcp->bits, nbits);
+}
+
+#define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
+static inline int __nodes_full(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_full(srcp->bits, nbits);
+}
+
+#define nodes_weight(nodemask) __nodes_weight(&(nodemask), MAX_NUMNODES)
+static inline int __nodes_weight(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_weight(srcp->bits, nbits);
+}
+
+#define nodes_shift_right(dst, src, n) \
+			__nodes_shift_right(&(dst), &(src), (n), MAX_NUMNODES)
+static inline void __nodes_shift_right(nodemask_t *dstp,
+					const nodemask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
+}
+
+#define nodes_shift_left(dst, src, n) \
+			__nodes_shift_left(&(dst), &(src), (n), MAX_NUMNODES)
+static inline void __nodes_shift_left(nodemask_t *dstp,
+					const nodemask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+
+/* FIXME: better would be to fix all architectures to never return
+          > MAX_NUMNODES, then the silly min_ts could be dropped. */
+
+#define first_node(src) __first_node(&(src))
+static inline int __first_node(const nodemask_t *srcp)
+{
+	return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
+}
+
+#define next_node(n, src) __next_node((n), &(src))
+static inline int __next_node(int n, const nodemask_t *srcp)
+{
+	return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
+}
+
+#define nodemask_of_node(node)						\
+({									\
+	typeof(_unused_nodemask_arg_) m;				\
+	if (sizeof(m) == sizeof(unsigned long)) {			\
+		m.bits[0] = 1UL<<(node);				\
+	} else {							\
+		nodes_clear(m);						\
+		node_set((node), m);					\
+	}								\
+	m;								\
+})
+
+#define first_unset_node(mask) __first_unset_node(&(mask))
+static inline int __first_unset_node(const nodemask_t *maskp)
+{
+	return min_t(int,MAX_NUMNODES,
+			find_first_zero_bit(maskp->bits, MAX_NUMNODES));
+}
+
+#define NODE_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(MAX_NUMNODES)
+
+#if MAX_NUMNODES <= BITS_PER_LONG
+
+#define NODE_MASK_ALL							\
+((nodemask_t) { {							\
+	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
+} })
+
+#else
+
+#define NODE_MASK_ALL							\
+((nodemask_t) { {							\
+	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-2] = ~0UL,			\
+	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
+} })
+
+#endif
+
+#define NODE_MASK_NONE							\
+((nodemask_t) { {							\
+	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-1] =  0UL			\
+} })
+
+#define nodes_addr(src) ((src).bits)
+
+#define nodemask_scnprintf(buf, len, src) \
+			__nodemask_scnprintf((buf), (len), &(src), MAX_NUMNODES)
+static inline int __nodemask_scnprintf(char *buf, int len,
+					const nodemask_t *srcp, int nbits)
+{
+	return bitmap_scnprintf(buf, len, srcp->bits, nbits);
+}
+
+#define nodemask_parse(ubuf, ulen, dst) \
+			__nodemask_parse((ubuf), (ulen), &(dst), MAX_NUMNODES)
+static inline int __nodemask_parse(const char __user *buf, int len,
+					nodemask_t *dstp, int nbits)
+{
+	return bitmap_parse(buf, len, dstp->bits, nbits);
+}
+
+#define nodelist_scnprintf(buf, len, src) \
+			__nodelist_scnprintf((buf), (len), &(src), MAX_NUMNODES)
+static inline int __nodelist_scnprintf(char *buf, int len,
+					const nodemask_t *srcp, int nbits)
+{
+	return bitmap_scnlistprintf(buf, len, srcp->bits, nbits);
+}
+
+#define nodelist_parse(buf, dst) __nodelist_parse((buf), &(dst), MAX_NUMNODES)
+static inline int __nodelist_parse(const char *buf, nodemask_t *dstp, int nbits)
+{
+	return bitmap_parselist(buf, dstp->bits, nbits);
+}
+
+#if MAX_NUMNODES > 1
+#define for_each_node_mask(node, mask)			\
+	for ((node) = first_node(mask);			\
+		(node) < MAX_NUMNODES;			\
+		(node) = next_node((node), (mask)))
+#else /* MAX_NUMNODES == 1 */
+#define for_each_node_mask(node, mask)			\
+	if (!nodes_empty(mask))				\
+		for ((node) = 0; (node) < 1; (node)++)
+#endif /* MAX_NUMNODES */
+
+/*
+ * The following particular system nodemasks and operations
+ * on them manage all possible and online nodes.
+ */
+
+extern nodemask_t node_online_map;
+extern nodemask_t node_possible_map;
+
+#if MAX_NUMNODES > 1
+#define num_online_nodes()	nodes_weight(node_online_map)
+#define num_possible_nodes()	nodes_weight(node_possible_map)
+#define node_online(node)	node_isset((node), node_online_map)
+#define node_possible(node)	node_isset((node), node_possible_map)
+#else
+#define num_online_nodes()	1
+#define num_possible_nodes()	1
+#define node_online(node)	((node) == 0)
+#define node_possible(node)	((node) == 0)
+#endif
+
+#define any_online_node(mask)			\
+({						\
+	int node;				\
+	for_each_node_mask(node, (mask))	\
+		if (node_online(node))		\
+			break;			\
+	node;					\
+})
+
+#define node_set_online(node)	   set_bit((node), node_online_map.bits)
+#define node_set_offline(node)	   clear_bit((node), node_online_map.bits)
+
+#define for_each_node(node)	   for_each_node_mask((node), node_possible_map)
+#define for_each_online_node(node) for_each_node_mask((node), node_online_map)
+
+#endif /* __LINUX_NODEMASK_H */
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
new file mode 100644
index 000000000000..9303a003e9ab
--- /dev/null
+++ b/include/linux/notifier.h
@@ -0,0 +1,75 @@
+/*
+ *	Routines to manage notifier chains for passing status changes to any
+ *	interested routines. We need this instead of hard coded call lists so
+ *	that modules can poke their nose into the innards. The network devices
+ *	needed them so here they are for the rest of you.
+ *
+ *				Alan Cox <Alan.Cox@linux.org>
+ */
+ 
+#ifndef _LINUX_NOTIFIER_H
+#define _LINUX_NOTIFIER_H
+#include <linux/errno.h>
+
+struct notifier_block
+{
+	int (*notifier_call)(struct notifier_block *self, unsigned long, void *);
+	struct notifier_block *next;
+	int priority;
+};
+
+
+#ifdef __KERNEL__
+
+extern int notifier_chain_register(struct notifier_block **list, struct notifier_block *n);
+extern int notifier_chain_unregister(struct notifier_block **nl, struct notifier_block *n);
+extern int notifier_call_chain(struct notifier_block **n, unsigned long val, void *v);
+
+#define NOTIFY_DONE		0x0000		/* Don't care */
+#define NOTIFY_OK		0x0001		/* Suits me */
+#define NOTIFY_STOP_MASK	0x8000		/* Don't call further */
+#define NOTIFY_BAD		(NOTIFY_STOP_MASK|0x0002)	/* Bad/Veto action	*/
+/*
+ * Clean way to return from the notifier and stop further calls.
+ */
+#define NOTIFY_STOP		(NOTIFY_OK|NOTIFY_STOP_MASK)
+
+/*
+ *	Declared notifiers so far. I can imagine quite a few more chains
+ *	over time (eg laptop power reset chains, reboot chain (to clean 
+ *	device units up), device [un]mount chain, module load/unload chain,
+ *	low memory chain, screenblank chain (for plug in modular screenblankers) 
+ *	VC switch chains (for loadable kernel svgalib VC switch helpers) etc...
+ */
+ 
+/* netdevice notifier chain */
+#define NETDEV_UP	0x0001	/* For now you can't veto a device up/down */
+#define NETDEV_DOWN	0x0002
+#define NETDEV_REBOOT	0x0003	/* Tell a protocol stack a network interface
+				   detected a hardware crash and restarted
+				   - we can use this eg to kick tcp sessions
+				   once done */
+#define NETDEV_CHANGE	0x0004	/* Notify device state change */
+#define NETDEV_REGISTER 0x0005
+#define NETDEV_UNREGISTER	0x0006
+#define NETDEV_CHANGEMTU	0x0007
+#define NETDEV_CHANGEADDR	0x0008
+#define NETDEV_GOING_DOWN	0x0009
+#define NETDEV_CHANGENAME	0x000A
+
+#define SYS_DOWN	0x0001	/* Notify of system down */
+#define SYS_RESTART	SYS_DOWN
+#define SYS_HALT	0x0002	/* Notify of system halt */
+#define SYS_POWER_OFF	0x0003	/* Notify of system power off */
+
+#define NETLINK_URELEASE	0x0001	/* Unicast netlink socket released */
+
+#define CPU_ONLINE		0x0002 /* CPU (unsigned)v is up */
+#define CPU_UP_PREPARE		0x0003 /* CPU (unsigned)v coming up */
+#define CPU_UP_CANCELED		0x0004 /* CPU (unsigned)v NOT coming up */
+#define CPU_DOWN_PREPARE	0x0005 /* CPU (unsigned)v going down */
+#define CPU_DOWN_FAILED		0x0006 /* CPU (unsigned)v NOT going down */
+#define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NOTIFIER_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
new file mode 100644
index 000000000000..870e66a96286
--- /dev/null
+++ b/include/linux/nubus.h
@@ -0,0 +1,334 @@
+/*
+  nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+  Originally written by Alan Cox.
+
+  Hacked to death by C. Scott Ananian and David Huggins-Daines.
+  
+  Some of the constants in here are from the corresponding
+  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
+  rest of them on our own. */
+
+#ifndef LINUX_NUBUS_H
+#define LINUX_NUBUS_H
+
+#ifdef __KERNEL__
+#include <asm/nubus.h>
+#endif
+
+enum nubus_category {
+	NUBUS_CAT_BOARD          = 0x0001,
+	NUBUS_CAT_DISPLAY        = 0x0003,
+	NUBUS_CAT_NETWORK        = 0x0004,
+	NUBUS_CAT_COMMUNICATIONS = 0x0006,
+	NUBUS_CAT_FONT           = 0x0009,
+	NUBUS_CAT_CPU            = 0x000A,
+	/* For lack of a better name */
+	NUBUS_CAT_DUODOCK        = 0x0020
+};
+
+enum nubus_type_network {
+	NUBUS_TYPE_ETHERNET 	 = 0x0001,
+	NUBUS_TYPE_RS232    	 = 0x0002
+};
+
+enum nubus_type_display {
+	NUBUS_TYPE_VIDEO 	 = 0x0001
+};
+
+enum nubus_type_cpu {
+	NUBUS_TYPE_68020 	 = 0x0003,
+	NUBUS_TYPE_68030 	 = 0x0004,
+	NUBUS_TYPE_68040 	 = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ *  68030 motherboards: <10,4,0,24>
+ *  68040 motherboards: <10,5,0,24>
+ *  DuoDock Plus: <32,1,1,2>
+ *
+ *  Toby Frame Buffer card: <3,1,1,1>
+ *  RBV built-in video (IIci): <3,1,1,24>
+ *  Valkyrie built-in video (Q630): <3,1,1,46>
+ *  Macintosh Display Card: <3,1,1,25>
+ *  Sonora built-in video (P460): <3,1,1,34>
+ *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ *   ROM on the above card: <2,1,0,0>
+ *  Cabletron ethernet card: <4,1,1,265>
+ *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ *  Kinetics EtherPort IIN: <4,1,259,262>
+ *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ *  Add your devices to the list!  You can obtain the "Slots" utility
+ *  from Apple's FTP site at:
+ *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
+ *  or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board.  This
+   is usually the one you want to look at when writing a driver.  It's
+   not as useful as you think, though, because as we should know by
+   now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRSW_APPLE       	= 0x0001,
+	NUBUS_DRSW_APPLE_HIRES 	= 0x0013, /* MacII HiRes card driver */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRSW_CABLETRON   	= 0x0001,
+	NUBUS_DRSW_SONIC_LC    	= 0x0001,
+	NUBUS_DRSW_KINETICS    	= 0x0103,
+	NUBUS_DRSW_ASANTE      	= 0x0104,
+	NUBUS_DRSW_DAYNA       	= 0x010b,
+	NUBUS_DRSW_FARALLON    	= 0x010c,
+	NUBUS_DRSW_APPLE_SN    	= 0x010f,
+	NUBUS_DRSW_DAYNA2	= 0x0115,
+	NUBUS_DRSW_FOCUS        = 0x011a,
+	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
+	NUBUS_DRSW_DAYNA_LC	= 0x011e,
+
+	/* NUBUS_CAT_CPU */
+	NUBUS_DRSW_NONE        	= 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+   least, it should...  some video cards are known to incorrectly
+   identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRHW_APPLE_TFB	= 0x0001, /* Toby frame buffer card */
+	NUBUS_DRHW_APPLE_HRVC	= 0x0013, /* Mac II High Res Video card */
+	NUBUS_DRHW_APPLE_RBV1   = 0x0018, /* IIci RBV video */
+	NUBUS_DRHW_APPLE_MDC    = 0x0019, /* Macintosh Display Card */
+	NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */
+	NUBUS_DRHW_APPLE_JET 	= 0x0029, /* Jet framebuffer (DuoDock) */
+	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+	NUBUS_DRHW_THUNDER24	= 0x02cb, /* SuperMac Thunder/24 */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRHW_INTERLAN     = 0x0100,
+	NUBUS_DRHW_SMC9194      = 0x0101,
+	NUBUS_DRHW_KINETICS     = 0x0106,
+	NUBUS_DRHW_CABLETRON    = 0x0109,
+	NUBUS_DRHW_ASANTE_LC    = 0x010f,
+	NUBUS_DRHW_SONIC        = 0x0110,
+	NUBUS_DRHW_SONIC_NB	= 0x0118,
+	NUBUS_DRHW_SONIC_LC	= 0x0119,
+	
+	/* NUBUS_CAT_COMMUNICATIONS */
+	NUBUS_DRHW_DOVEFAX	= 0x0100,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+   wonderful tidbits of information that may or may not reside in the
+   NuBus ROM directory. */
+enum nubus_res_id {
+	NUBUS_RESID_TYPE         = 0x0001,
+	NUBUS_RESID_NAME         = 0x0002,
+	NUBUS_RESID_ICON         = 0x0003,
+	NUBUS_RESID_DRVRDIR      = 0x0004,
+	NUBUS_RESID_LOADREC      = 0x0005,
+	NUBUS_RESID_BOOTREC      = 0x0006,
+	NUBUS_RESID_FLAGS        = 0x0007,
+	NUBUS_RESID_HWDEVID      = 0x0008,
+	NUBUS_RESID_MINOR_BASEOS = 0x000a,
+	NUBUS_RESID_MINOR_LENGTH = 0x000b,
+	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+	NUBUS_RESID_CICN         = 0x000f,
+	NUBUS_RESID_ICL8         = 0x0010,
+	NUBUS_RESID_ICL4         = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+	NUBUS_RESID_BOARDID	 = 0x0020,
+	NUBUS_RESID_PRAMINITDATA = 0x0021,
+	NUBUS_RESID_PRIMARYINIT	 = 0x0022,
+	NUBUS_RESID_TIMEOUTCONST = 0x0023,
+	NUBUS_RESID_VENDORINFO	 = 0x0024,
+	NUBUS_RESID_BOARDFLAGS	 = 0x0025,
+	NUBUS_RESID_SECONDINIT	 = 0x0026,
+
+	/* Not sure why Apple put these next two in here */
+	NUBUS_RESID_VIDNAMES 	 = 0x0041,
+	NUBUS_RESID_VIDMODES 	 = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+	NUBUS_RESID_VEND_ID     = 0x0001,
+	NUBUS_RESID_VEND_SERIAL = 0x0002,
+	NUBUS_RESID_VEND_REV    = 0x0003,
+	NUBUS_RESID_VEND_PART   = 0x0004,
+	NUBUS_RESID_VEND_DATE   = 0x0005
+};
+
+enum nubus_net_res_id {
+	NUBUS_RESID_MAC_ADDRESS  = 0x0080
+};
+
+enum nubus_cpu_res_id {
+	NUBUS_RESID_MEMINFO      = 0x0081,
+	NUBUS_RESID_ROMINFO      = 0x0082
+};
+
+enum nubus_display_res_id {
+	NUBUS_RESID_GAMMADIR	= 0x0040,
+	NUBUS_RESID_FIRSTMODE	= 0x0080,
+	NUBUS_RESID_SECONDMODE	= 0x0081,
+	NUBUS_RESID_THIRDMODE	= 0x0082,
+	NUBUS_RESID_FOURTHMODE	= 0x0083,
+	NUBUS_RESID_FIFTHMODE	= 0x0084,
+	NUBUS_RESID_SIXTHMODE	= 0x0085
+};
+
+struct nubus_dir
+{
+	unsigned char *base;
+	unsigned char *ptr;
+	int done;
+	int mask;
+};
+
+struct nubus_dirent
+{
+	unsigned char *base;
+	unsigned char type;
+	__u32 data;	/* Actually 24bits used */
+	int mask;
+};
+
+struct nubus_board {
+	struct nubus_board* next;
+	struct nubus_dev* first_dev;
+	
+        /* Only 9-E actually exist, though 0-8 are also theoretically
+	   possible, and 0 is a special case which represents the
+	   motherboard and onboard peripherals (Ethernet, video) */
+	int slot;
+	/* For slot 0, this is bogus. */
+	char name[64];
+
+	/* Format block */
+	unsigned char* fblock;
+	/* Root directory (does *not* always equal fblock + doffset!) */
+	unsigned char* directory;
+	
+	unsigned long slot_addr;
+	/* Offset to root directory (sometimes) */
+	unsigned long doffset;
+	/* Length over which to compute the crc */
+	unsigned long rom_length;
+	/* Completely useless most of the time */
+	unsigned long crc;
+	unsigned char rev;
+	unsigned char format;
+	unsigned char lanes;
+};
+
+struct nubus_dev {
+	/* Next link in device list */
+	struct nubus_dev* next;
+	/* Directory entry in /proc/bus/nubus */
+	struct proc_dir_entry* procdir;
+
+	/* The functional resource ID of this device */
+	unsigned char resid;
+	/* These are mostly here for convenience; we could always read
+	   them from the ROMs if we wanted to */
+	unsigned short category;
+	unsigned short type;
+	unsigned short dr_sw;
+	unsigned short dr_hw;
+	/* This is the device's name rather than the board's.
+	   Sometimes they are different.  Usually the board name is
+	   more correct. */
+	char name[64];
+	/* MacOS driver (I kid you not) */
+	unsigned char* driver;
+	/* Actually this is an offset */
+	unsigned long iobase;
+	unsigned long iosize;
+	unsigned char flags, hwdevid;
+	
+	/* Functional directory */
+	unsigned char* directory;
+	/* Much of our info comes from here */
+	struct nubus_board* board;
+};
+
+/* This is all NuBus devices (used to find devices later on) */
+extern struct nubus_dev* nubus_devices;
+/* This is all NuBus cards */
+extern struct nubus_board* nubus_boards;
+
+/* Generic NuBus interface functions, modelled after the PCI interface */
+void nubus_scan_bus(void);
+extern void nubus_proc_init(void);
+int get_nubus_list(char *buf);
+int nubus_proc_attach_device(struct nubus_dev *dev);
+int nubus_proc_detach_device(struct nubus_dev *dev);
+/* If we need more precision we can add some more of these */
+struct nubus_dev* nubus_find_device(unsigned short category,
+				    unsigned short type,
+				    unsigned short dr_hw,
+				    unsigned short dr_sw,
+				    const struct nubus_dev* from);
+struct nubus_dev* nubus_find_type(unsigned short category,
+				  unsigned short type,
+				  const struct nubus_dev* from);
+/* Might have more than one device in a slot, you know... */
+struct nubus_dev* nubus_find_slot(unsigned int slot,
+				  const struct nubus_dev* from);
+
+/* These are somewhat more NuBus-specific.  They all return 0 for
+   success and -1 for failure, as you'd expect. */
+
+/* The root directory which contains the board and functional
+   directories */
+int nubus_get_root_dir(const struct nubus_board* board,
+		       struct nubus_dir* dir);
+/* The board directory */
+int nubus_get_board_dir(const struct nubus_board* board,
+			struct nubus_dir* dir);
+/* The functional directory */
+int nubus_get_func_dir(const struct nubus_dev* dev,
+		       struct nubus_dir* dir);
+
+/* These work on any directory gotten via the above */
+int nubus_readdir(struct nubus_dir* dir,
+		  struct nubus_dirent* ent);
+int nubus_find_rsrc(struct nubus_dir* dir,
+		    unsigned char rsrc_type,
+		    struct nubus_dirent* ent);
+int nubus_rewinddir(struct nubus_dir* dir);
+
+/* Things to do with directory entries */
+int nubus_get_subdir(const struct nubus_dirent* ent,
+		     struct nubus_dir* dir);
+void nubus_get_rsrc_mem(void* dest,
+			const struct nubus_dirent *dirent,
+			int len);
+void nubus_get_rsrc_str(void* dest,
+			const struct nubus_dirent *dirent,
+			int maxlen);
+
+/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+	return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* LINUX_NUBUS_H */
diff --git a/include/linux/numa.h b/include/linux/numa.h
new file mode 100644
index 000000000000..bd0c8c4e9a95
--- /dev/null
+++ b/include/linux/numa.h
@@ -0,0 +1,16 @@
+#ifndef _LINUX_NUMA_H
+#define _LINUX_NUMA_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+#include <asm/numnodes.h>
+#endif
+
+#ifndef NODES_SHIFT
+#define NODES_SHIFT     0
+#endif
+
+#define MAX_NUMNODES    (1 << NODES_SHIFT)
+
+#endif /* _LINUX_NUMA_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
new file mode 100644
index 000000000000..b031e41b5e0d
--- /dev/null
+++ b/include/linux/nvram.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_NVRAM_H
+#define _LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE    14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
+
+#ifdef __KERNEL__
+/* __foo is foo without grabbing the rtc_lock - get it yourself */
+extern unsigned char __nvram_read_byte(int i);
+extern unsigned char nvram_read_byte(int i);
+extern void __nvram_write_byte(unsigned char c, int i);
+extern void nvram_write_byte(unsigned char c, int i);
+extern int __nvram_check_checksum(void);
+extern int nvram_check_checksum(void);
+extern void __nvram_set_checksum(void);
+extern void nvram_set_checksum(void);
+#endif
+
+#endif  /* _LINUX_NVRAM_H */
diff --git a/include/linux/openprom_fs.h b/include/linux/openprom_fs.h
new file mode 100644
index 000000000000..a837aab8217e
--- /dev/null
+++ b/include/linux/openprom_fs.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_OPENPROM_FS_H
+#define _LINUX_OPENPROM_FS_H
+
+/*
+ * The openprom filesystem constants/structures
+ */
+
+#define OPENPROM_SUPER_MAGIC 0x9fa1
+
+#endif /* _LINUX_OPENPROM_FS_H */
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
new file mode 100644
index 000000000000..559c4c38a9c7
--- /dev/null
+++ b/include/linux/oprofile.h
@@ -0,0 +1,119 @@
+/**
+ * @file oprofile.h
+ *
+ * API for machine-specific interrupts to interface
+ * to oprofile.
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon <levon@movementarian.org>
+ */
+
+#ifndef OPROFILE_H
+#define OPROFILE_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+ 
+struct super_block;
+struct dentry;
+struct file_operations;
+struct pt_regs;
+ 
+/* Operations structure to be filled in */
+struct oprofile_operations {
+	/* create any necessary configuration files in the oprofile fs.
+	 * Optional. */
+	int (*create_files)(struct super_block * sb, struct dentry * root);
+	/* Do any necessary interrupt setup. Optional. */
+	int (*setup)(void);
+	/* Do any necessary interrupt shutdown. Optional. */
+	void (*shutdown)(void);
+	/* Start delivering interrupts. */
+	int (*start)(void);
+	/* Stop delivering interrupts. */
+	void (*stop)(void);
+	/* Initiate a stack backtrace. Optional. */
+	void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
+	/* CPU identification string. */
+	char * cpu_type;
+};
+
+/**
+ * One-time initialisation. *ops must be set to a filled-in
+ * operations structure. This is called even in timer interrupt
+ * mode so an arch can set a backtrace callback.
+ *
+ * If an error occurs, the fields should be left untouched.
+ */
+int oprofile_arch_init(struct oprofile_operations * ops);
+ 
+/**
+ * One-time exit/cleanup for the arch.
+ */
+void oprofile_arch_exit(void);
+
+/**
+ * Add a sample. This may be called from any context. Pass
+ * smp_processor_id() as cpu.
+ */
+void oprofile_add_sample(struct pt_regs * const regs, unsigned long event);
+
+/* Use this instead when the PC value is not from the regs. Doesn't
+ * backtrace. */
+void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event);
+
+/* add a backtrace entry, to be called from the ->backtrace callback */
+void oprofile_add_trace(unsigned long eip);
+
+
+/**
+ * Create a file of the given name as a child of the given root, with
+ * the specified file operations.
+ */
+int oprofilefs_create_file(struct super_block * sb, struct dentry * root,
+	char const * name, struct file_operations * fops);
+
+int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root,
+	char const * name, struct file_operations * fops, int perm);
+ 
+/** Create a file for read/write access to an unsigned long. */
+int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root,
+	char const * name, ulong * val);
+ 
+/** Create a file for read-only access to an unsigned long. */
+int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root,
+	char const * name, ulong * val);
+ 
+/** Create a file for read-only access to an atomic_t. */
+int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root,
+	char const * name, atomic_t * val);
+ 
+/** create a directory */
+struct dentry * oprofilefs_mkdir(struct super_block * sb, struct dentry * root,
+	char const * name);
+
+/**
+ * Write the given asciz string to the given user buffer @buf, updating *offset
+ * appropriately. Returns bytes written or -EFAULT.
+ */
+ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset);
+
+/**
+ * Convert an unsigned long value into ASCII and copy it to the user buffer @buf,
+ * updating *offset appropriately. Returns bytes written or -EFAULT.
+ */
+ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset);
+
+/**
+ * Read an ASCII string for a number from a userspace buffer and fill *val on success.
+ * Returns 0 on success, < 0 on error.
+ */
+int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count);
+
+/** lock for read/write safety */
+extern spinlock_t oprofilefs_lock;
+ 
+#endif /* OPROFILE_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
new file mode 100644
index 000000000000..6b74fcf5bb63
--- /dev/null
+++ b/include/linux/page-flags.h
@@ -0,0 +1,324 @@
+/*
+ * Macros for manipulating and testing page->flags
+ */
+
+#ifndef PAGE_FLAGS_H
+#define PAGE_FLAGS_H
+
+#include <linux/percpu.h>
+#include <linux/cache.h>
+#include <asm/pgtable.h>
+
+/*
+ * Various page->flags bits:
+ *
+ * PG_reserved is set for special pages, which can never be swapped out. Some
+ * of them might not even exist (eg empty_bad_page)...
+ *
+ * The PG_private bitflag is set if page->private contains a valid value.
+ *
+ * During disk I/O, PG_locked is used. This bit is set before I/O and
+ * reset when I/O completes. page_waitqueue(page) is a wait queue of all tasks
+ * waiting for the I/O on this page to complete.
+ *
+ * PG_uptodate tells whether the page's contents is valid.  When a read
+ * completes, the page becomes uptodate, unless a disk I/O error happened.
+ *
+ * For choosing which pages to swap out, inode pages carry a PG_referenced bit,
+ * which is set any time the system accesses that page through the (mapping,
+ * index) hash table.  This referenced bit, together with the referenced bit
+ * in the page tables, is used to manipulate page->age and move the page across
+ * the active, inactive_dirty and inactive_clean lists.
+ *
+ * Note that the referenced bit, the page->lru list_head and the active,
+ * inactive_dirty and inactive_clean lists are protected by the
+ * zone->lru_lock, and *NOT* by the usual PG_locked bit!
+ *
+ * PG_error is set to indicate that an I/O error occurred on this page.
+ *
+ * PG_arch_1 is an architecture specific page state bit.  The generic code
+ * guarantees that this bit is cleared for a page when it first is entered into
+ * the page cache.
+ *
+ * PG_highmem pages are not permanently mapped into the kernel virtual address
+ * space, they need to be kmapped separately for doing IO on the pages.  The
+ * struct page (these bits with information) are always mapped into kernel
+ * address space...
+ */
+
+/*
+ * Don't use the *_dontuse flags.  Use the macros.  Otherwise you'll break
+ * locked- and dirty-page accounting.  The top eight bits of page->flags are
+ * used for page->zone, so putting flag bits there doesn't work.
+ */
+#define PG_locked	 	 0	/* Page is locked. Don't touch. */
+#define PG_error		 1
+#define PG_referenced		 2
+#define PG_uptodate		 3
+
+#define PG_dirty	 	 4
+#define PG_lru			 5
+#define PG_active		 6
+#define PG_slab			 7	/* slab debug (Suparna wants this) */
+
+#define PG_highmem		 8
+#define PG_checked		 9	/* kill me in 2.5.<early>. */
+#define PG_arch_1		10
+#define PG_reserved		11
+
+#define PG_private		12	/* Has something at ->private */
+#define PG_writeback		13	/* Page is under writeback */
+#define PG_nosave		14	/* Used for system suspend/resume */
+#define PG_compound		15	/* Part of a compound page */
+
+#define PG_swapcache		16	/* Swap page: swp_entry_t in private */
+#define PG_mappedtodisk		17	/* Has blocks allocated on-disk */
+#define PG_reclaim		18	/* To be reclaimed asap */
+#define PG_nosave_free		19	/* Free, should not be written */
+#define PG_uncached		20	/* Page has been mapped as uncached */
+
+/*
+ * Global page accounting.  One instance per CPU.  Only unsigned longs are
+ * allowed.
+ */
+struct page_state {
+	unsigned long nr_dirty;		/* Dirty writeable pages */
+	unsigned long nr_writeback;	/* Pages under writeback */
+	unsigned long nr_unstable;	/* NFS unstable pages */
+	unsigned long nr_page_table_pages;/* Pages used for pagetables */
+	unsigned long nr_mapped;	/* mapped into pagetables */
+	unsigned long nr_slab;		/* In slab */
+#define GET_PAGE_STATE_LAST nr_slab
+
+	/*
+	 * The below are zeroed by get_page_state().  Use get_full_page_state()
+	 * to add up all these.
+	 */
+	unsigned long pgpgin;		/* Disk reads */
+	unsigned long pgpgout;		/* Disk writes */
+	unsigned long pswpin;		/* swap reads */
+	unsigned long pswpout;		/* swap writes */
+	unsigned long pgalloc_high;	/* page allocations */
+
+	unsigned long pgalloc_normal;
+	unsigned long pgalloc_dma;
+	unsigned long pgfree;		/* page freeings */
+	unsigned long pgactivate;	/* pages moved inactive->active */
+	unsigned long pgdeactivate;	/* pages moved active->inactive */
+
+	unsigned long pgfault;		/* faults (major+minor) */
+	unsigned long pgmajfault;	/* faults (major only) */
+	unsigned long pgrefill_high;	/* inspected in refill_inactive_zone */
+	unsigned long pgrefill_normal;
+	unsigned long pgrefill_dma;
+
+	unsigned long pgsteal_high;	/* total highmem pages reclaimed */
+	unsigned long pgsteal_normal;
+	unsigned long pgsteal_dma;
+	unsigned long pgscan_kswapd_high;/* total highmem pages scanned */
+	unsigned long pgscan_kswapd_normal;
+
+	unsigned long pgscan_kswapd_dma;
+	unsigned long pgscan_direct_high;/* total highmem pages scanned */
+	unsigned long pgscan_direct_normal;
+	unsigned long pgscan_direct_dma;
+	unsigned long pginodesteal;	/* pages reclaimed via inode freeing */
+
+	unsigned long slabs_scanned;	/* slab objects scanned */
+	unsigned long kswapd_steal;	/* pages reclaimed by kswapd */
+	unsigned long kswapd_inodesteal;/* reclaimed via kswapd inode freeing */
+	unsigned long pageoutrun;	/* kswapd's calls to page reclaim */
+	unsigned long allocstall;	/* direct reclaim calls */
+
+	unsigned long pgrotated;	/* pages rotated to tail of the LRU */
+};
+
+extern void get_page_state(struct page_state *ret);
+extern void get_full_page_state(struct page_state *ret);
+extern unsigned long __read_page_state(unsigned offset);
+extern void __mod_page_state(unsigned offset, unsigned long delta);
+
+#define read_page_state(member) \
+	__read_page_state(offsetof(struct page_state, member))
+
+#define mod_page_state(member, delta)	\
+	__mod_page_state(offsetof(struct page_state, member), (delta))
+
+#define inc_page_state(member)	mod_page_state(member, 1UL)
+#define dec_page_state(member)	mod_page_state(member, 0UL - 1)
+#define add_page_state(member,delta) mod_page_state(member, (delta))
+#define sub_page_state(member,delta) mod_page_state(member, 0UL - (delta))
+
+#define mod_page_state_zone(zone, member, delta)				\
+	do {									\
+		unsigned offset;						\
+		if (is_highmem(zone))						\
+			offset = offsetof(struct page_state, member##_high);	\
+		else if (is_normal(zone))					\
+			offset = offsetof(struct page_state, member##_normal);	\
+		else								\
+			offset = offsetof(struct page_state, member##_dma);	\
+		__mod_page_state(offset, (delta));				\
+	} while (0)
+
+/*
+ * Manipulation of page state flags
+ */
+#define PageLocked(page)		\
+		test_bit(PG_locked, &(page)->flags)
+#define SetPageLocked(page)		\
+		set_bit(PG_locked, &(page)->flags)
+#define TestSetPageLocked(page)		\
+		test_and_set_bit(PG_locked, &(page)->flags)
+#define ClearPageLocked(page)		\
+		clear_bit(PG_locked, &(page)->flags)
+#define TestClearPageLocked(page)	\
+		test_and_clear_bit(PG_locked, &(page)->flags)
+
+#define PageError(page)		test_bit(PG_error, &(page)->flags)
+#define SetPageError(page)	set_bit(PG_error, &(page)->flags)
+#define ClearPageError(page)	clear_bit(PG_error, &(page)->flags)
+
+#define PageReferenced(page)	test_bit(PG_referenced, &(page)->flags)
+#define SetPageReferenced(page)	set_bit(PG_referenced, &(page)->flags)
+#define ClearPageReferenced(page)	clear_bit(PG_referenced, &(page)->flags)
+#define TestClearPageReferenced(page) test_and_clear_bit(PG_referenced, &(page)->flags)
+
+#define PageUptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+#ifndef SetPageUptodate
+#define SetPageUptodate(page)	set_bit(PG_uptodate, &(page)->flags)
+#endif
+#define ClearPageUptodate(page)	clear_bit(PG_uptodate, &(page)->flags)
+
+#define PageDirty(page)		test_bit(PG_dirty, &(page)->flags)
+#define SetPageDirty(page)	set_bit(PG_dirty, &(page)->flags)
+#define TestSetPageDirty(page)	test_and_set_bit(PG_dirty, &(page)->flags)
+#define ClearPageDirty(page)	clear_bit(PG_dirty, &(page)->flags)
+#define TestClearPageDirty(page) test_and_clear_bit(PG_dirty, &(page)->flags)
+
+#define SetPageLRU(page)	set_bit(PG_lru, &(page)->flags)
+#define PageLRU(page)		test_bit(PG_lru, &(page)->flags)
+#define TestSetPageLRU(page)	test_and_set_bit(PG_lru, &(page)->flags)
+#define TestClearPageLRU(page)	test_and_clear_bit(PG_lru, &(page)->flags)
+
+#define PageActive(page)	test_bit(PG_active, &(page)->flags)
+#define SetPageActive(page)	set_bit(PG_active, &(page)->flags)
+#define ClearPageActive(page)	clear_bit(PG_active, &(page)->flags)
+#define TestClearPageActive(page) test_and_clear_bit(PG_active, &(page)->flags)
+#define TestSetPageActive(page) test_and_set_bit(PG_active, &(page)->flags)
+
+#define PageSlab(page)		test_bit(PG_slab, &(page)->flags)
+#define SetPageSlab(page)	set_bit(PG_slab, &(page)->flags)
+#define ClearPageSlab(page)	clear_bit(PG_slab, &(page)->flags)
+#define TestClearPageSlab(page)	test_and_clear_bit(PG_slab, &(page)->flags)
+#define TestSetPageSlab(page)	test_and_set_bit(PG_slab, &(page)->flags)
+
+#ifdef CONFIG_HIGHMEM
+#define PageHighMem(page)	test_bit(PG_highmem, &(page)->flags)
+#else
+#define PageHighMem(page)	0 /* needed to optimize away at compile time */
+#endif
+
+#define PageChecked(page)	test_bit(PG_checked, &(page)->flags)
+#define SetPageChecked(page)	set_bit(PG_checked, &(page)->flags)
+#define ClearPageChecked(page)	clear_bit(PG_checked, &(page)->flags)
+
+#define PageReserved(page)	test_bit(PG_reserved, &(page)->flags)
+#define SetPageReserved(page)	set_bit(PG_reserved, &(page)->flags)
+#define ClearPageReserved(page)	clear_bit(PG_reserved, &(page)->flags)
+#define __ClearPageReserved(page)	__clear_bit(PG_reserved, &(page)->flags)
+
+#define SetPagePrivate(page)	set_bit(PG_private, &(page)->flags)
+#define ClearPagePrivate(page)	clear_bit(PG_private, &(page)->flags)
+#define PagePrivate(page)	test_bit(PG_private, &(page)->flags)
+#define __SetPagePrivate(page)  __set_bit(PG_private, &(page)->flags)
+#define __ClearPagePrivate(page) __clear_bit(PG_private, &(page)->flags)
+
+#define PageWriteback(page)	test_bit(PG_writeback, &(page)->flags)
+#define SetPageWriteback(page)						\
+	do {								\
+		if (!test_and_set_bit(PG_writeback,			\
+				&(page)->flags))			\
+			inc_page_state(nr_writeback);			\
+	} while (0)
+#define TestSetPageWriteback(page)					\
+	({								\
+		int ret;						\
+		ret = test_and_set_bit(PG_writeback,			\
+					&(page)->flags);		\
+		if (!ret)						\
+			inc_page_state(nr_writeback);			\
+		ret;							\
+	})
+#define ClearPageWriteback(page)					\
+	do {								\
+		if (test_and_clear_bit(PG_writeback,			\
+				&(page)->flags))			\
+			dec_page_state(nr_writeback);			\
+	} while (0)
+#define TestClearPageWriteback(page)					\
+	({								\
+		int ret;						\
+		ret = test_and_clear_bit(PG_writeback,			\
+				&(page)->flags);			\
+		if (ret)						\
+			dec_page_state(nr_writeback);			\
+		ret;							\
+	})
+
+#define PageNosave(page)	test_bit(PG_nosave, &(page)->flags)
+#define SetPageNosave(page)	set_bit(PG_nosave, &(page)->flags)
+#define TestSetPageNosave(page)	test_and_set_bit(PG_nosave, &(page)->flags)
+#define ClearPageNosave(page)		clear_bit(PG_nosave, &(page)->flags)
+#define TestClearPageNosave(page)	test_and_clear_bit(PG_nosave, &(page)->flags)
+
+#define PageNosaveFree(page)	test_bit(PG_nosave_free, &(page)->flags)
+#define SetPageNosaveFree(page)	set_bit(PG_nosave_free, &(page)->flags)
+#define ClearPageNosaveFree(page)		clear_bit(PG_nosave_free, &(page)->flags)
+
+#define PageMappedToDisk(page)	test_bit(PG_mappedtodisk, &(page)->flags)
+#define SetPageMappedToDisk(page) set_bit(PG_mappedtodisk, &(page)->flags)
+#define ClearPageMappedToDisk(page) clear_bit(PG_mappedtodisk, &(page)->flags)
+
+#define PageReclaim(page)	test_bit(PG_reclaim, &(page)->flags)
+#define SetPageReclaim(page)	set_bit(PG_reclaim, &(page)->flags)
+#define ClearPageReclaim(page)	clear_bit(PG_reclaim, &(page)->flags)
+#define TestClearPageReclaim(page) test_and_clear_bit(PG_reclaim, &(page)->flags)
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define PageCompound(page)	test_bit(PG_compound, &(page)->flags)
+#else
+#define PageCompound(page)	0
+#endif
+#define SetPageCompound(page)	set_bit(PG_compound, &(page)->flags)
+#define ClearPageCompound(page)	clear_bit(PG_compound, &(page)->flags)
+
+#ifdef CONFIG_SWAP
+#define PageSwapCache(page)	test_bit(PG_swapcache, &(page)->flags)
+#define SetPageSwapCache(page)	set_bit(PG_swapcache, &(page)->flags)
+#define ClearPageSwapCache(page) clear_bit(PG_swapcache, &(page)->flags)
+#else
+#define PageSwapCache(page)	0
+#endif
+
+#define PageUncached(page)	test_bit(PG_uncached, &(page)->flags)
+#define SetPageUncached(page)	set_bit(PG_uncached, &(page)->flags)
+#define ClearPageUncached(page)	clear_bit(PG_uncached, &(page)->flags)
+
+struct page;	/* forward declaration */
+
+int test_clear_page_dirty(struct page *page);
+int test_clear_page_writeback(struct page *page);
+int test_set_page_writeback(struct page *page);
+
+static inline void clear_page_dirty(struct page *page)
+{
+	test_clear_page_dirty(page);
+}
+
+static inline void set_page_writeback(struct page *page)
+{
+	test_set_page_writeback(page);
+}
+
+#endif	/* PAGE_FLAGS_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
new file mode 100644
index 000000000000..0422031161ba
--- /dev/null
+++ b/include/linux/pagemap.h
@@ -0,0 +1,246 @@
+#ifndef _LINUX_PAGEMAP_H
+#define _LINUX_PAGEMAP_H
+
+/*
+ * Copyright 1995 Linus Torvalds
+ */
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/highmem.h>
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <linux/gfp.h>
+
+/*
+ * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
+ * allocation mode flags.
+ */
+#define	AS_EIO		(__GFP_BITS_SHIFT + 0)	/* IO error on async write */
+#define AS_ENOSPC	(__GFP_BITS_SHIFT + 1)	/* ENOSPC on async write */
+
+static inline unsigned int __nocast mapping_gfp_mask(struct address_space * mapping)
+{
+	return mapping->flags & __GFP_BITS_MASK;
+}
+
+/*
+ * This is non-atomic.  Only to be used before the mapping is activated.
+ * Probably needs a barrier...
+ */
+static inline void mapping_set_gfp_mask(struct address_space *m, int mask)
+{
+	m->flags = (m->flags & ~__GFP_BITS_MASK) | mask;
+}
+
+/*
+ * The page cache can done in larger chunks than
+ * one page, because it allows for more efficient
+ * throughput (it can then be mapped into user
+ * space in smaller chunks for same flexibility).
+ *
+ * Or rather, it _will_ be done in larger chunks.
+ */
+#define PAGE_CACHE_SHIFT	PAGE_SHIFT
+#define PAGE_CACHE_SIZE		PAGE_SIZE
+#define PAGE_CACHE_MASK		PAGE_MASK
+#define PAGE_CACHE_ALIGN(addr)	(((addr)+PAGE_CACHE_SIZE-1)&PAGE_CACHE_MASK)
+
+#define page_cache_get(page)		get_page(page)
+#define page_cache_release(page)	put_page(page)
+void release_pages(struct page **pages, int nr, int cold);
+
+static inline struct page *page_cache_alloc(struct address_space *x)
+{
+	return alloc_pages(mapping_gfp_mask(x), 0);
+}
+
+static inline struct page *page_cache_alloc_cold(struct address_space *x)
+{
+	return alloc_pages(mapping_gfp_mask(x)|__GFP_COLD, 0);
+}
+
+typedef int filler_t(void *, struct page *);
+
+extern struct page * find_get_page(struct address_space *mapping,
+				unsigned long index);
+extern struct page * find_lock_page(struct address_space *mapping,
+				unsigned long index);
+extern struct page * find_trylock_page(struct address_space *mapping,
+				unsigned long index);
+extern struct page * find_or_create_page(struct address_space *mapping,
+				unsigned long index, unsigned int gfp_mask);
+unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
+			unsigned int nr_pages, struct page **pages);
+unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
+			int tag, unsigned int nr_pages, struct page **pages);
+
+/*
+ * Returns locked page at given index in given cache, creating it if needed.
+ */
+static inline struct page *grab_cache_page(struct address_space *mapping, unsigned long index)
+{
+	return find_or_create_page(mapping, index, mapping_gfp_mask(mapping));
+}
+
+extern struct page * grab_cache_page_nowait(struct address_space *mapping,
+				unsigned long index);
+extern struct page * read_cache_page(struct address_space *mapping,
+				unsigned long index, filler_t *filler,
+				void *data);
+extern int read_cache_pages(struct address_space *mapping,
+		struct list_head *pages, filler_t *filler, void *data);
+
+int add_to_page_cache(struct page *page, struct address_space *mapping,
+				unsigned long index, int gfp_mask);
+int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
+				unsigned long index, int gfp_mask);
+extern void remove_from_page_cache(struct page *page);
+extern void __remove_from_page_cache(struct page *page);
+
+extern atomic_t nr_pagecache;
+
+#ifdef CONFIG_SMP
+
+#define PAGECACHE_ACCT_THRESHOLD        max(16, NR_CPUS * 2)
+DECLARE_PER_CPU(long, nr_pagecache_local);
+
+/*
+ * pagecache_acct implements approximate accounting for pagecache.
+ * vm_enough_memory() do not need high accuracy. Writers will keep
+ * an offset in their per-cpu arena and will spill that into the
+ * global count whenever the absolute value of the local count
+ * exceeds the counter's threshold.
+ *
+ * MUST be protected from preemption.
+ * current protection is mapping->page_lock.
+ */
+static inline void pagecache_acct(int count)
+{
+	long *local;
+
+	local = &__get_cpu_var(nr_pagecache_local);
+	*local += count;
+	if (*local > PAGECACHE_ACCT_THRESHOLD || *local < -PAGECACHE_ACCT_THRESHOLD) {
+		atomic_add(*local, &nr_pagecache);
+		*local = 0;
+	}
+}
+
+#else
+
+static inline void pagecache_acct(int count)
+{
+	atomic_add(count, &nr_pagecache);
+}
+#endif
+
+static inline unsigned long get_page_cache_size(void)
+{
+	int ret = atomic_read(&nr_pagecache);
+	if (unlikely(ret < 0))
+		ret = 0;
+	return ret;
+}
+
+/*
+ * Return byte-offset into filesystem object for page.
+ */
+static inline loff_t page_offset(struct page *page)
+{
+	return ((loff_t)page->index) << PAGE_CACHE_SHIFT;
+}
+
+static inline pgoff_t linear_page_index(struct vm_area_struct *vma,
+					unsigned long address)
+{
+	pgoff_t pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
+	pgoff += vma->vm_pgoff;
+	return pgoff >> (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+}
+
+extern void FASTCALL(__lock_page(struct page *page));
+extern void FASTCALL(unlock_page(struct page *page));
+
+static inline void lock_page(struct page *page)
+{
+	might_sleep();
+	if (TestSetPageLocked(page))
+		__lock_page(page);
+}
+	
+/*
+ * This is exported only for wait_on_page_locked/wait_on_page_writeback.
+ * Never use this directly!
+ */
+extern void FASTCALL(wait_on_page_bit(struct page *page, int bit_nr));
+
+/* 
+ * Wait for a page to be unlocked.
+ *
+ * This must be called with the caller "holding" the page,
+ * ie with increased "page->count" so that the page won't
+ * go away during the wait..
+ */
+static inline void wait_on_page_locked(struct page *page)
+{
+	if (PageLocked(page))
+		wait_on_page_bit(page, PG_locked);
+}
+
+/* 
+ * Wait for a page to complete writeback
+ */
+static inline void wait_on_page_writeback(struct page *page)
+{
+	if (PageWriteback(page))
+		wait_on_page_bit(page, PG_writeback);
+}
+
+extern void end_page_writeback(struct page *page);
+
+/*
+ * Fault a userspace page into pagetables.  Return non-zero on a fault.
+ *
+ * This assumes that two userspace pages are always sufficient.  That's
+ * not true if PAGE_CACHE_SIZE > PAGE_SIZE.
+ */
+static inline int fault_in_pages_writeable(char __user *uaddr, int size)
+{
+	int ret;
+
+	/*
+	 * Writing zeroes into userspace here is OK, because we know that if
+	 * the zero gets there, we'll be overwriting it.
+	 */
+	ret = __put_user(0, uaddr);
+	if (ret == 0) {
+		char __user *end = uaddr + size - 1;
+
+		/*
+		 * If the page was already mapped, this will get a cache miss
+		 * for sure, so try to avoid doing it.
+		 */
+		if (((unsigned long)uaddr & PAGE_MASK) !=
+				((unsigned long)end & PAGE_MASK))
+		 	ret = __put_user(0, end);
+	}
+	return ret;
+}
+
+static inline void fault_in_pages_readable(const char __user *uaddr, int size)
+{
+	volatile char c;
+	int ret;
+
+	ret = __get_user(c, uaddr);
+	if (ret == 0) {
+		const char __user *end = uaddr + size - 1;
+
+		if (((unsigned long)uaddr & PAGE_MASK) !=
+				((unsigned long)end & PAGE_MASK))
+		 	__get_user(c, end);
+	}
+}
+
+#endif /* _LINUX_PAGEMAP_H */
diff --git a/include/linux/pagevec.h b/include/linux/pagevec.h
new file mode 100644
index 000000000000..def32c5715be
--- /dev/null
+++ b/include/linux/pagevec.h
@@ -0,0 +1,85 @@
+/*
+ * include/linux/pagevec.h
+ *
+ * In many places it is efficient to batch an operation up against multiple
+ * pages.  A pagevec is a multipage container which is used for that.
+ */
+
+/* 14 pointers + two long's align the pagevec structure to a power of two */
+#define PAGEVEC_SIZE	14
+
+struct page;
+struct address_space;
+
+struct pagevec {
+	unsigned long nr;
+	unsigned long cold;
+	struct page *pages[PAGEVEC_SIZE];
+};
+
+void __pagevec_release(struct pagevec *pvec);
+void __pagevec_release_nonlru(struct pagevec *pvec);
+void __pagevec_free(struct pagevec *pvec);
+void __pagevec_lru_add(struct pagevec *pvec);
+void __pagevec_lru_add_active(struct pagevec *pvec);
+void pagevec_strip(struct pagevec *pvec);
+unsigned pagevec_lookup(struct pagevec *pvec, struct address_space *mapping,
+		pgoff_t start, unsigned nr_pages);
+unsigned pagevec_lookup_tag(struct pagevec *pvec,
+		struct address_space *mapping, pgoff_t *index, int tag,
+		unsigned nr_pages);
+
+static inline void pagevec_init(struct pagevec *pvec, int cold)
+{
+	pvec->nr = 0;
+	pvec->cold = cold;
+}
+
+static inline void pagevec_reinit(struct pagevec *pvec)
+{
+	pvec->nr = 0;
+}
+
+static inline unsigned pagevec_count(struct pagevec *pvec)
+{
+	return pvec->nr;
+}
+
+static inline unsigned pagevec_space(struct pagevec *pvec)
+{
+	return PAGEVEC_SIZE - pvec->nr;
+}
+
+/*
+ * Add a page to a pagevec.  Returns the number of slots still available.
+ */
+static inline unsigned pagevec_add(struct pagevec *pvec, struct page *page)
+{
+	pvec->pages[pvec->nr++] = page;
+	return pagevec_space(pvec);
+}
+
+
+static inline void pagevec_release(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_release(pvec);
+}
+
+static inline void pagevec_release_nonlru(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_release_nonlru(pvec);
+}
+
+static inline void pagevec_free(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_free(pvec);
+}
+
+static inline void pagevec_lru_add(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_lru_add(pvec);
+}
diff --git a/include/linux/param.h b/include/linux/param.h
new file mode 100644
index 000000000000..092e92f67b50
--- /dev/null
+++ b/include/linux/param.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_PARAM_H
+#define _LINUX_PARAM_H
+
+#include <asm/param.h>
+
+#endif
diff --git a/include/linux/parport.h b/include/linux/parport.h
new file mode 100644
index 000000000000..d2a4d9e1e6d1
--- /dev/null
+++ b/include/linux/parport.h
@@ -0,0 +1,552 @@
+/* $Id: parport.h,v 1.1 1998/05/17 10:57:52 andrea Exp andrea $ */
+
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PARPORT_H_
+#define _PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX  16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE  -1
+#define PARPORT_DMA_NONE  -1
+#define PARPORT_IRQ_AUTO  -2
+#define PARPORT_DMA_AUTO  -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE   -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE    0x1
+#define PARPORT_CONTROL_AUTOFD    0x2
+#define PARPORT_CONTROL_INIT      0x4
+#define PARPORT_CONTROL_SELECT    0x8
+
+#define PARPORT_STATUS_ERROR      0x8
+#define PARPORT_STATUS_SELECT     0x10
+#define PARPORT_STATUS_PAPEROUT   0x20
+#define PARPORT_STATUS_ACK        0x40
+#define PARPORT_STATUS_BUSY       0x80
+
+/* Type classes for Plug-and-Play probe.  */
+typedef enum {
+	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
+	PARPORT_CLASS_PRINTER,
+	PARPORT_CLASS_MODEM,
+	PARPORT_CLASS_NET,
+	PARPORT_CLASS_HDC,              /* Hard disk controller */
+	PARPORT_CLASS_PCMCIA,
+	PARPORT_CLASS_MEDIA,            /* Multimedia device */
+	PARPORT_CLASS_FDC,              /* Floppy disk controller */
+	PARPORT_CLASS_PORTS,
+	PARPORT_CLASS_SCANNER,
+	PARPORT_CLASS_DIGCAM,
+	PARPORT_CLASS_OTHER,            /* Anything else */
+	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
+	PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+   capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes: 
+   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+   'extensibility request' values.  Others are special.
+   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
+#define IEEE1284_MODE_NIBBLE             0
+#define IEEE1284_MODE_BYTE              (1<<0)
+#define IEEE1284_MODE_COMPAT            (1<<8)
+#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP               (1<<4)
+#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP               (1<<6)
+#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
+#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
+						 * extensibility link to
+						 * be requested, using
+						 * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations.  They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
+#define IEEE1284_DATA			 0	/* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/jiffies.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/semaphore.h>
+
+/* Define this later. */
+struct parport;
+struct pardevice;
+
+struct pc_parport_state {
+	unsigned int ctr;
+	unsigned int ecr;
+};
+
+struct ax_parport_state {
+	unsigned int ctr;
+	unsigned int ecr;
+	unsigned int dcsr;
+};
+
+/* used by both parport_amiga and parport_mfc3 */
+struct amiga_parport_state {
+       unsigned char data;     /* ciaa.prb */
+       unsigned char datadir;  /* ciaa.ddrb */
+       unsigned char status;   /* ciab.pra & 7 */
+       unsigned char statusdir;/* ciab.ddrb & 7 */
+};
+
+struct parport_state {
+	union {
+		struct pc_parport_state pc;
+		/* ARC has no state. */
+		struct ax_parport_state ax;
+		struct amiga_parport_state amiga;
+		/* Atari has not state. */
+		void *misc; 
+	} u;
+};
+
+struct parport_operations {
+	/* IBM PC-style virtual registers. */
+	void (*write_data)(struct parport *, unsigned char);
+	unsigned char (*read_data)(struct parport *);
+
+	void (*write_control)(struct parport *, unsigned char);
+	unsigned char (*read_control)(struct parport *);
+	unsigned char (*frob_control)(struct parport *, unsigned char mask,
+				      unsigned char val);
+
+	unsigned char (*read_status)(struct parport *);
+
+	/* IRQs. */
+	void (*enable_irq)(struct parport *);
+	void (*disable_irq)(struct parport *);
+
+	/* Data direction. */
+	void (*data_forward) (struct parport *);
+	void (*data_reverse) (struct parport *);
+
+	/* For core parport code. */
+	void (*init_state)(struct pardevice *, struct parport_state *);
+	void (*save_state)(struct parport *, struct parport_state *);
+	void (*restore_state)(struct parport *, struct parport_state *);
+
+	/* Block read/write */
+	size_t (*epp_write_data) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*epp_read_data) (struct parport *port, void *buf, size_t len,
+				 int flags);
+	size_t (*epp_write_addr) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*epp_read_addr) (struct parport *port, void *buf, size_t len,
+				 int flags);
+
+	size_t (*ecp_write_data) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*ecp_read_data) (struct parport *port, void *buf, size_t len,
+				 int flags);
+	size_t (*ecp_write_addr) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+
+	size_t (*compat_write_data) (struct parport *port, const void *buf,
+				     size_t len, int flags);
+	size_t (*nibble_read_data) (struct parport *port, void *buf,
+				    size_t len, int flags);
+	size_t (*byte_read_data) (struct parport *port, void *buf,
+				  size_t len, int flags);
+	struct module *owner;
+};
+
+struct parport_device_info {
+	parport_device_class class;
+	const char *class_name;
+	const char *mfr;
+	const char *model;
+	const char *cmdset;
+	const char *description;
+};
+
+/* Each device can have two callback functions:
+ *  1) a preemption function, called by the resource manager to request
+ *     that the driver relinquish control of the port.  The driver should
+ *     return zero if it agrees to release the port, and nonzero if it 
+ *     refuses.  Do not call parport_release() - the kernel will do this
+ *     implicitly.
+ *
+ *  2) a wake-up function, called by the resource manager to tell drivers
+ *     that the port is available to be claimed.  If a driver wants to use
+ *     the port, it should call parport_claim() here.
+ */
+
+/* A parallel port device */
+struct pardevice {
+	const char *name;
+	struct parport *port;
+	int daisy;
+	int (*preempt)(void *);
+	void (*wakeup)(void *);
+	void *private;
+	void (*irq_func)(int, void *, struct pt_regs *);
+	unsigned int flags;
+	struct pardevice *next;
+	struct pardevice *prev;
+	struct parport_state *state;     /* saved status over preemption */
+	wait_queue_head_t wait_q;
+	unsigned long int time;
+	unsigned long int timeslice;
+	volatile long int timeout;
+	unsigned long waiting;		 /* long req'd for set_bit --RR */
+	struct pardevice *waitprev;
+	struct pardevice *waitnext;
+	void * sysctl_table;
+};
+
+/* IEEE1284 information */
+
+/* IEEE1284 phases */
+enum ieee1284_phase {
+	IEEE1284_PH_FWD_DATA,
+	IEEE1284_PH_FWD_IDLE,
+	IEEE1284_PH_TERMINATE,
+	IEEE1284_PH_NEGOTIATION,
+	IEEE1284_PH_HBUSY_DNA,
+	IEEE1284_PH_REV_IDLE,
+	IEEE1284_PH_HBUSY_DAVAIL,
+	IEEE1284_PH_REV_DATA,
+	IEEE1284_PH_ECP_SETUP,
+	IEEE1284_PH_ECP_FWD_TO_REV,
+	IEEE1284_PH_ECP_REV_TO_FWD,
+	IEEE1284_PH_ECP_DIR_UNKNOWN,
+};
+struct ieee1284_info {
+	int mode;
+	volatile enum ieee1284_phase phase;
+	struct semaphore irq;
+};
+
+/* A parallel port */
+struct parport {
+	unsigned long base;	/* base address */
+	unsigned long base_hi;  /* base address (hi - ECR) */
+	unsigned int size;	/* IO extent */
+	const char *name;
+	unsigned int modes;
+	int irq;		/* interrupt (or -1 for none) */
+	int dma;
+	int muxport;		/* which muxport (if any) this is */
+	int portnum;		/* which physical parallel port (not mux) */
+
+	struct parport *physport;
+				/* If this is a non-default mux
+				   parport, i.e. we're a clone of a real
+				   physical port, this is a pointer to that
+				   port. The locking is only done in the
+				   real port.  For a clone port, the
+				   following structure members are
+				   meaningless: devices, cad, muxsel,
+				   waithead, waittail, flags, pdir,
+				   ieee1284, *_lock.
+
+				   It this is a default mux parport, or
+				   there is no mux involved, this points to
+				   ourself. */
+
+	struct pardevice *devices;
+	struct pardevice *cad;	/* port owner */
+	int daisy;		/* currently selected daisy addr */
+	int muxsel;		/* currently selected mux port */
+
+	struct pardevice *waithead;
+	struct pardevice *waittail;
+	
+	struct list_head list;
+	unsigned int flags;
+
+	void *sysctl_table;
+	struct parport_device_info probe_info[5]; /* 0-3 + non-IEEE1284.3 */
+	struct ieee1284_info ieee1284;
+
+	struct parport_operations *ops;
+	void *private_data;     /* for lowlevel driver */
+
+	int number;		/* port index - the `n' in `parportn' */
+	spinlock_t pardevice_lock;
+	spinlock_t waitlist_lock;
+	rwlock_t cad_lock;
+
+	int spintime;
+	atomic_t ref_count;
+
+	struct list_head full_list;
+	struct parport *slaves[3];
+};
+
+#define DEFAULT_SPIN_TIME 500 /* us */
+
+struct parport_driver {
+	const char *name;
+	void (*attach) (struct parport *);
+	void (*detach) (struct parport *);
+	struct list_head list;
+};
+
+/* parport_register_port registers a new parallel port at the given
+   address (if one does not already exist) and returns a pointer to it.
+   This entails claiming the I/O region, IRQ and DMA.  NULL is returned
+   if initialisation fails. */
+struct parport *parport_register_port(unsigned long base, int irq, int dma,
+				      struct parport_operations *ops);
+
+/* Once a registered port is ready for high-level drivers to use, the
+   low-level driver that registered it should announce it.  This will
+   call the high-level drivers' attach() functions (after things like
+   determining the IEEE 1284.3 topology of the port and collecting
+   DeviceIDs). */
+void parport_announce_port (struct parport *port);
+
+/* Unregister a port. */
+extern void parport_remove_port(struct parport *port);
+
+/* Register a new high-level driver. */
+extern int parport_register_driver (struct parport_driver *);
+
+/* Unregister a high-level driver. */
+extern void parport_unregister_driver (struct parport_driver *);
+
+/* If parport_register_driver doesn't fit your needs, perhaps
+ * parport_find_xxx does. */
+extern struct parport *parport_find_number (int);
+extern struct parport *parport_find_base (unsigned long);
+
+/* Reference counting for ports. */
+extern struct parport *parport_get_port (struct parport *);
+extern void parport_put_port (struct parport *);
+
+/* parport_register_device declares that a device is connected to a
+   port, and tells the kernel all it needs to know.
+   - pf is the preemption function (may be NULL for no callback)
+   - kf is the wake-up function (may be NULL for no callback)
+   - irq_func is the interrupt handler (may be NULL for no interrupts)
+   - handle is a user pointer that gets handed to callback functions.  */
+struct pardevice *parport_register_device(struct parport *port, 
+			  const char *name,
+			  int (*pf)(void *), void (*kf)(void *),
+			  void (*irq_func)(int, void *, struct pt_regs *), 
+			  int flags, void *handle);
+
+/* parport_unregister unlinks a device from the chain. */
+extern void parport_unregister_device(struct pardevice *dev);
+
+/* parport_claim tries to gain ownership of the port for a particular
+   driver.  This may fail (return non-zero) if another driver is busy.
+   If this driver has registered an interrupt handler, it will be
+   enabled.  */
+extern int parport_claim(struct pardevice *dev);
+
+/* parport_claim_or_block is the same, but sleeps if the port cannot
+   be claimed.  Return value is 1 if it slept, 0 normally and -errno
+   on error.  */
+extern int parport_claim_or_block(struct pardevice *dev);
+
+/* parport_release reverses a previous parport_claim.  This can never
+   fail, though the effects are undefined (except that they are bad)
+   if you didn't previously own the port.  Once you have released the
+   port you should make sure that neither your code nor the hardware
+   on the port tries to initiate any communication without first
+   re-claiming the port.  If you mess with the port state (enabling
+   ECP for example) you should clean up before releasing the port. */
+
+extern void parport_release(struct pardevice *dev);
+
+/**
+ * parport_yield - relinquish a parallel port temporarily
+ * @dev: a device on the parallel port
+ *
+ * This function relinquishes the port if it would be helpful to other
+ * drivers to do so.  Afterwards it tries to reclaim the port using
+ * parport_claim(), and the return value is the same as for
+ * parport_claim().  If it fails, the port is left unclaimed and it is
+ * the driver's responsibility to reclaim the port.
+ *
+ * The parport_yield() and parport_yield_blocking() functions are for
+ * marking points in the driver at which other drivers may claim the
+ * port and use their devices.  Yielding the port is similar to
+ * releasing it and reclaiming it, but is more efficient because no
+ * action is taken if there are no other devices needing the port.  In
+ * fact, nothing is done even if there are other devices waiting but
+ * the current device is still within its "timeslice".  The default
+ * timeslice is half a second, but it can be adjusted via the /proc
+ * interface.
+ **/
+static __inline__ int parport_yield(struct pardevice *dev)
+{
+	unsigned long int timeslip = (jiffies - dev->time);
+	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
+		return 0;
+	parport_release(dev);
+	return parport_claim(dev);
+}
+
+/**
+ * parport_yield_blocking - relinquish a parallel port temporarily
+ * @dev: a device on the parallel port
+ *
+ * This function relinquishes the port if it would be helpful to other
+ * drivers to do so.  Afterwards it tries to reclaim the port using
+ * parport_claim_or_block(), and the return value is the same as for
+ * parport_claim_or_block().
+ **/
+static __inline__ int parport_yield_blocking(struct pardevice *dev)
+{
+	unsigned long int timeslip = (jiffies - dev->time);
+	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
+		return 0;
+	parport_release(dev);
+	return parport_claim_or_block(dev);
+}
+
+/* Flags used to identify what a device does. */
+#define PARPORT_DEV_TRAN		0	/* WARNING !! DEPRECATED !! */
+#define PARPORT_DEV_LURK		(1<<0)	/* WARNING !! DEPRECATED !! */
+#define PARPORT_DEV_EXCL		(1<<1)	/* Need exclusive access. */
+
+#define PARPORT_FLAG_EXCL		(1<<1)	/* EXCL driver registered. */
+
+/* IEEE1284 functions */
+extern void parport_ieee1284_interrupt (int, void *, struct pt_regs *);
+extern int parport_negotiate (struct parport *, int mode);
+extern ssize_t parport_write (struct parport *, const void *buf, size_t len);
+extern ssize_t parport_read (struct parport *, void *buf, size_t len);
+
+#define PARPORT_INACTIVITY_O_NONBLOCK 1
+extern long parport_set_timeout (struct pardevice *, long inactivity);
+
+extern int parport_wait_event (struct parport *, long timeout);
+extern int parport_wait_peripheral (struct parport *port,
+				    unsigned char mask,
+				    unsigned char val);
+extern int parport_poll_peripheral (struct parport *port,
+				    unsigned char mask,
+				    unsigned char val,
+				    int usec);
+
+/* For architectural drivers */
+extern size_t parport_ieee1284_write_compat (struct parport *,
+					     const void *, size_t, int);
+extern size_t parport_ieee1284_read_nibble (struct parport *,
+					    void *, size_t, int);
+extern size_t parport_ieee1284_read_byte (struct parport *,
+					  void *, size_t, int);
+extern size_t parport_ieee1284_ecp_read_data (struct parport *,
+					      void *, size_t, int);
+extern size_t parport_ieee1284_ecp_write_data (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_ecp_write_addr (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_write_data (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_read_data (struct parport *,
+					      void *, size_t, int);
+extern size_t parport_ieee1284_epp_write_addr (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_read_addr (struct parport *,
+					      void *, size_t, int);
+
+/* IEEE1284.3 functions */
+extern int parport_daisy_init (struct parport *port);
+extern void parport_daisy_fini (struct parport *port);
+extern struct pardevice *parport_open (int devnum, const char *name,
+				       int (*pf) (void *),
+				       void (*kf) (void *),
+				       void (*irqf) (int, void *,
+						     struct pt_regs *),
+				       int flags, void *handle);
+extern void parport_close (struct pardevice *dev);
+extern ssize_t parport_device_id (int devnum, char *buffer, size_t len);
+extern int parport_device_num (int parport, int mux, int daisy);
+extern void parport_daisy_deselect_all (struct parport *port);
+extern int parport_daisy_select (struct parport *port, int daisy, int mode);
+
+/* Lowlevel drivers _can_ call this support function to handle irqs.  */
+static __inline__ void parport_generic_irq(int irq, struct parport *port,
+					   struct pt_regs *regs)
+{
+	parport_ieee1284_interrupt (irq, port, regs);
+	read_lock(&port->cad_lock);
+	if (port->cad && port->cad->irq_func)
+		port->cad->irq_func(irq, port->cad->private, regs);
+	read_unlock(&port->cad_lock);
+}
+
+/* Prototypes from parport_procfs */
+extern int parport_proc_register(struct parport *pp);
+extern int parport_proc_unregister(struct parport *pp);
+extern int parport_device_proc_register(struct pardevice *device);
+extern int parport_device_proc_unregister(struct pardevice *device);
+
+/* If PC hardware is the only type supported, we can optimise a bit.  */
+#if !defined(CONFIG_PARPORT_NOT_PC)
+
+#include <linux/parport_pc.h>
+#define parport_write_data(p,x)            parport_pc_write_data(p,x)
+#define parport_read_data(p)               parport_pc_read_data(p)
+#define parport_write_control(p,x)         parport_pc_write_control(p,x)
+#define parport_read_control(p)            parport_pc_read_control(p)
+#define parport_frob_control(p,m,v)        parport_pc_frob_control(p,m,v)
+#define parport_read_status(p)             parport_pc_read_status(p)
+#define parport_enable_irq(p)              parport_pc_enable_irq(p)
+#define parport_disable_irq(p)             parport_pc_disable_irq(p)
+#define parport_data_forward(p)            parport_pc_data_forward(p)
+#define parport_data_reverse(p)            parport_pc_data_reverse(p)
+
+#else  /*  !CONFIG_PARPORT_NOT_PC  */
+
+/* Generic operations vector through the dispatch table. */
+#define parport_write_data(p,x)            (p)->ops->write_data(p,x)
+#define parport_read_data(p)               (p)->ops->read_data(p)
+#define parport_write_control(p,x)         (p)->ops->write_control(p,x)
+#define parport_read_control(p)            (p)->ops->read_control(p)
+#define parport_frob_control(p,m,v)        (p)->ops->frob_control(p,m,v)
+#define parport_read_status(p)             (p)->ops->read_status(p)
+#define parport_enable_irq(p)              (p)->ops->enable_irq(p)
+#define parport_disable_irq(p)             (p)->ops->disable_irq(p)
+#define parport_data_forward(p)            (p)->ops->data_forward(p)
+#define parport_data_reverse(p)            (p)->ops->data_reverse(p)
+
+#endif /*  !CONFIG_PARPORT_NOT_PC  */
+
+#endif /* __KERNEL__ */
+#endif /* _PARPORT_H_ */
diff --git a/include/linux/parport_pc.h b/include/linux/parport_pc.h
new file mode 100644
index 000000000000..7825c76cbd00
--- /dev/null
+++ b/include/linux/parport_pc.h
@@ -0,0 +1,238 @@
+#ifndef __LINUX_PARPORT_PC_H
+#define __LINUX_PARPORT_PC_H
+
+#include <asm/io.h>
+
+/* --- register definitions ------------------------------- */
+
+#define ECONTROL(p) ((p)->base_hi + 0x2)
+#define CONFIGB(p)  ((p)->base_hi + 0x1)
+#define CONFIGA(p)  ((p)->base_hi + 0x0)
+#define FIFO(p)     ((p)->base_hi + 0x0)
+#define EPPDATA(p)  ((p)->base    + 0x4)
+#define EPPADDR(p)  ((p)->base    + 0x3)
+#define CONTROL(p)  ((p)->base    + 0x2)
+#define STATUS(p)   ((p)->base    + 0x1)
+#define DATA(p)     ((p)->base    + 0x0)
+
+struct parport_pc_private {
+	/* Contents of CTR. */
+	unsigned char ctr;
+
+	/* Bitmask of writable CTR bits. */
+	unsigned char ctr_writable;
+
+	/* Whether or not there's an ECR. */
+	int ecr;
+
+	/* Number of PWords that FIFO will hold. */
+	int fifo_depth;
+
+	/* Number of bytes per portword. */
+	int pword;
+
+	/* Not used yet. */
+	int readIntrThreshold;
+	int writeIntrThreshold;
+
+	/* buffer suitable for DMA, if DMA enabled */
+	char *dma_buf;
+	dma_addr_t dma_handle;
+	struct pci_dev *dev;
+	struct list_head list;
+	struct parport *port;
+};
+
+struct parport_pc_via_data
+{
+	/* ISA PnP IRQ routing register 1 */
+	u8 via_pci_parport_irq_reg;
+	/* ISA PnP DMA request routing register */
+	u8 via_pci_parport_dma_reg;
+	/* Register and value to enable SuperIO configuration access */
+	u8 via_pci_superio_config_reg;
+	u8 via_pci_superio_config_data;
+	/* SuperIO function register number */
+	u8 viacfg_function;
+	/* parallel port control register number */
+	u8 viacfg_parport_control;
+	/* Parallel port base address register */
+	u8 viacfg_parport_base;
+};
+
+static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d)
+{
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d);
+#endif
+	outb(d, DATA(p));
+}
+
+static __inline__ unsigned char parport_pc_read_data(struct parport *p)
+{
+	unsigned char val = inb (DATA (p));
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n",
+		p, val);
+#endif
+	return val;
+}
+
+#ifdef DEBUG_PARPORT
+extern __inline__ void dump_parport_state (char *str, struct parport *p)
+{
+	/* here's hoping that reading these ports won't side-effect anything underneath */
+	unsigned char ecr = inb (ECONTROL (p));
+	unsigned char dcr = inb (CONTROL (p));
+	unsigned char dsr = inb (STATUS (p));
+	static char *ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"};
+	const struct parport_pc_private *priv = (parport_pc_private *)p->physport->private_data;
+	int i;
+
+	printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]);
+	if (ecr & 0x10) printk (",nErrIntrEn");
+	if (ecr & 0x08) printk (",dmaEn");
+	if (ecr & 0x04) printk (",serviceIntr");
+	if (ecr & 0x02) printk (",f_full");
+	if (ecr & 0x01) printk (",f_empty");
+	for (i=0; i<2; i++) {
+		printk ("]  dcr(%s)=[", i ? "soft" : "hard");
+		dcr = i ? priv->ctr : inb (CONTROL (p));
+	
+		if (dcr & 0x20) {
+			printk ("rev");
+		} else {
+			printk ("fwd");
+		}
+		if (dcr & 0x10) printk (",ackIntEn");
+		if (!(dcr & 0x08)) printk (",N-SELECT-IN");
+		if (dcr & 0x04) printk (",N-INIT");
+		if (!(dcr & 0x02)) printk (",N-AUTOFD");
+		if (!(dcr & 0x01)) printk (",N-STROBE");
+	}
+	printk ("]  dsr=[");
+	if (!(dsr & 0x80)) printk ("BUSY");
+	if (dsr & 0x40) printk (",N-ACK");
+	if (dsr & 0x20) printk (",PERROR");
+	if (dsr & 0x10) printk (",SELECT");
+	if (dsr & 0x08) printk (",N-FAULT");
+	printk ("]\n");
+	return;
+}
+#else	/* !DEBUG_PARPORT */
+#define dump_parport_state(args...)
+#endif	/* !DEBUG_PARPORT */
+
+/* __parport_pc_frob_control differs from parport_pc_frob_control in that
+ * it doesn't do any extra masking. */
+static __inline__ unsigned char __parport_pc_frob_control (struct parport *p,
+							   unsigned char mask,
+							   unsigned char val)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char ctr = priv->ctr;
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG
+		"__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n",
+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+#endif
+	ctr = (ctr & ~mask) ^ val;
+	ctr &= priv->ctr_writable; /* only write writable bits. */
+	outb (ctr, CONTROL (p));
+	priv->ctr = ctr;	/* Update soft copy */
+	return ctr;
+}
+
+static __inline__ void parport_pc_data_reverse (struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x20, 0x20);
+}
+
+static __inline__ void parport_pc_data_forward (struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x20, 0x00);
+}
+
+static __inline__ void parport_pc_write_control (struct parport *p,
+						 unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (d & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+			p->name, p->cad->name);
+		parport_pc_data_reverse (p);
+	}
+
+	__parport_pc_frob_control (p, wm, d & wm);
+}
+
+static __inline__ unsigned char parport_pc_read_control(struct parport *p)
+{
+	const unsigned char rm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+	const struct parport_pc_private *priv = p->physport->private_data;
+	return priv->ctr & rm; /* Use soft copy */
+}
+
+static __inline__ unsigned char parport_pc_frob_control (struct parport *p,
+							 unsigned char mask,
+							 unsigned char val)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (mask & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
+			p->name, p->cad->name,
+			(val & 0x20) ? "reverse" : "forward");
+		if (val & 0x20)
+			parport_pc_data_reverse (p);
+		else
+			parport_pc_data_forward (p);
+	}
+
+	/* Restrict mask and val to control lines. */
+	mask &= wm;
+	val &= wm;
+
+	return __parport_pc_frob_control (p, mask, val);
+}
+
+static __inline__ unsigned char parport_pc_read_status(struct parport *p)
+{
+	return inb(STATUS(p));
+}
+
+
+static __inline__ void parport_pc_disable_irq(struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x10, 0x00);
+}
+
+static __inline__ void parport_pc_enable_irq(struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x10, 0x10);
+}
+
+extern void parport_pc_release_resources(struct parport *p);
+
+extern int parport_pc_claim_resources(struct parport *p);
+
+/* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */
+extern struct parport *parport_pc_probe_port (unsigned long base,
+					      unsigned long base_hi,
+					      int irq, int dma,
+					      struct pci_dev *dev);
+extern void parport_pc_unregister_port (struct parport *p);
+
+#endif
diff --git a/include/linux/parser.h b/include/linux/parser.h
new file mode 100644
index 000000000000..fa3332861a09
--- /dev/null
+++ b/include/linux/parser.h
@@ -0,0 +1,33 @@
+/*
+ * linux/include/linux/parser.h
+ *
+ * Header for lib/parser.c
+ * Intended use of these functions is parsing filesystem argument lists,
+ * but could potentially be used anywhere else that simple option=arg
+ * parsing is required.
+ */
+
+
+/* associates an integer enumerator with a pattern string. */
+struct match_token {
+	int token;
+	char *pattern;
+};
+
+typedef struct match_token match_table_t[];
+
+/* Maximum number of arguments that match_token will find in a pattern */
+enum {MAX_OPT_ARGS = 3};
+
+/* Describe the location within a string of a substring */
+typedef struct {
+	char *from;
+	char *to;
+} substring_t;
+
+int match_token(char *, match_table_t table, substring_t args[]);
+int match_int(substring_t *, int *result);
+int match_octal(substring_t *, int *result);
+int match_hex(substring_t *, int *result);
+void match_strcpy(char *, substring_t *);
+char *match_strdup(substring_t *);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
new file mode 100644
index 000000000000..857126a36ecc
--- /dev/null
+++ b/include/linux/pci-acpi.h
@@ -0,0 +1,61 @@
+/*
+ * File		pci-acpi.h
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PCI_ACPI_H_
+#define _PCI_ACPI_H_
+
+#define OSC_QUERY_TYPE			0
+#define OSC_SUPPORT_TYPE 		1
+#define OSC_CONTROL_TYPE		2
+#define OSC_SUPPORT_MASKS		0x1f
+
+/*
+ * _OSC DW0 Definition 
+ */
+#define OSC_QUERY_ENABLE		1
+#define OSC_REQUEST_ERROR		2
+#define OSC_INVALID_UUID_ERROR		4
+#define OSC_INVALID_REVISION_ERROR	8
+#define OSC_CAPABILITIES_MASK_ERROR	16
+
+/*
+ * _OSC DW1 Definition (OS Support Fields)
+ */
+#define OSC_EXT_PCI_CONFIG_SUPPORT		1
+#define OSC_ACTIVE_STATE_PWR_SUPPORT 		2
+#define OSC_CLOCK_PWR_CAPABILITY_SUPPORT	4
+#define OSC_PCI_SEGMENT_GROUPS_SUPPORT		8
+#define OSC_MSI_SUPPORT				16
+
+/*
+ * _OSC DW1 Definition (OS Control Fields)
+ */
+#define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL	1
+#define OSC_SHPC_NATIVE_HP_CONTROL 		2
+#define OSC_PCI_EXPRESS_PME_CONTROL		4
+#define OSC_PCI_EXPRESS_AER_CONTROL		8
+#define OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL	16
+
+#define OSC_CONTROL_MASKS 	(OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | 	\
+				OSC_SHPC_NATIVE_HP_CONTROL | 		\
+				OSC_PCI_EXPRESS_PME_CONTROL |		\
+				OSC_PCI_EXPRESS_AER_CONTROL |		\
+				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
+
+#ifdef CONFIG_ACPI
+extern acpi_status pci_osc_control_set(u32 flags);
+extern acpi_status pci_osc_support_set(u32 flags);
+#else
+#if !defined(acpi_status)
+typedef u32 		acpi_status;
+#define AE_ERROR      	(acpi_status) (0x0001)
+#endif    
+static inline acpi_status pci_osc_control_set(u32 flags) {return AE_ERROR;}
+static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} 
+#endif
+
+#endif	/* _PCI_ACPI_H_ */
diff --git a/include/linux/pci-dynids.h b/include/linux/pci-dynids.h
new file mode 100644
index 000000000000..183b6b0de81c
--- /dev/null
+++ b/include/linux/pci-dynids.h
@@ -0,0 +1,18 @@
+/*
+ *	PCI defines and function prototypes
+ *	Copyright 2003 Dell Inc.
+ *        by Matt Domsch <Matt_Domsch@dell.com>
+ */
+
+#ifndef LINUX_PCI_DYNIDS_H
+#define LINUX_PCI_DYNIDS_H
+
+#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+
+struct dynid {
+	struct list_head        node;
+	struct pci_device_id    id;
+};
+
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
new file mode 100644
index 000000000000..bea13a99e6fb
--- /dev/null
+++ b/include/linux/pci.h
@@ -0,0 +1,1067 @@
+/*
+ *	pci.h
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ */
+
+#ifndef LINUX_PCI_H
+#define LINUX_PCI_H
+
+#include <linux/mod_devicetable.h>
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID		0x00	/* 16 bits */
+#define PCI_DEVICE_ID		0x02	/* 16 bits */
+#define PCI_COMMAND		0x04	/* 16 bits */
+#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
+#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
+#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
+#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
+#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
+#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
+#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST	0x000	
+#define  PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define  PCI_STATUS_DEVSEL_SLOW 0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8
+					   revision */
+#define PCI_REVISION_ID         0x08    /* Revision ID */
+#define PCI_CLASS_PROG          0x09    /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE        0x0a    /* Device class */
+
+#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
+#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
+#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL	0
+#define  PCI_HEADER_TYPE_BRIDGE 1
+#define  PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST		0x0f	/* 8 bits */
+#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of 
+ * 0xffffffff to the register, and reading it back.  Only 
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
+#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
+#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
+#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE	0x01	/* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS		0x28
+#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
+#define PCI_SUBSYSTEM_ID	0x2e  
+#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE	0x01
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
+#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
+#define PCI_MIN_GNT		0x3e	/* 8 bits */
+#define PCI_MAX_LAT		0x3f	/* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
+#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
+#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
+#define PCI_IO_LIMIT		0x1d
+#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16	0x00
+#define  PCI_IO_RANGE_TYPE_32	0x01
+#define  PCI_IO_RANGE_MASK	(~0x0fUL)
+#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
+#define PCI_MEMORY_LIMIT	0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT	0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_PREF_RANGE_TYPE_32	0x00
+#define  PCI_PREF_RANGE_TYPE_64	0x01
+#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32	0x2c
+#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16	0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL	0x3e
+#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */
+#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST	0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
+#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
+#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0	0x1c
+#define PCI_CB_MEMORY_LIMIT_0	0x20
+#define PCI_CB_MEMORY_BASE_1	0x24
+#define PCI_CB_MEMORY_LIMIT_1	0x28
+#define PCI_CB_IO_BASE_0	0x2c
+#define PCI_CB_IO_BASE_0_HI	0x2e
+#define PCI_CB_IO_LIMIT_0	0x30
+#define PCI_CB_IO_LIMIT_0_HI	0x32
+#define PCI_CB_IO_BASE_1	0x34
+#define PCI_CB_IO_BASE_1_HI	0x36
+#define PCI_CB_IO_LIMIT_1	0x38
+#define PCI_CB_IO_LIMIT_1_HI	0x3a
+#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL	0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR		0x02
+#define  PCI_CB_BRIDGE_CTL_ISA		0x04
+#define  PCI_CB_BRIDGE_CTL_VGA		0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID	0x42
+#define PCI_CB_LEGACY_MODE_BASE	0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID		0	/* Capability ID */
+#define  PCI_CAP_ID_PM		0x01	/* Power Management */
+#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
+#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
+#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
+#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
+#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
+#define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
+#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
+#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
+#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF		4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC              2       /* PM Capabilities Register */
+#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
+#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
+#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
+#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxilliary power support mask */
+#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
+#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
+#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
+#define  PCI_PM_CAP_PME_MASK    0xF800  /* PME Mask of all supported states */
+#define  PCI_PM_CAP_PME_D0      0x0800  /* PME# from D0 */
+#define  PCI_PM_CAP_PME_D1      0x1000  /* PME# from D1 */
+#define  PCI_PM_CAP_PME_D2      0x2000  /* PME# from D2 */
+#define  PCI_PM_CAP_PME_D3      0x4000  /* PME# from D3 (hot) */
+#define  PCI_PM_CAP_PME_D3cold  0x8000  /* PME# from D3 (cold) */
+#define PCI_PM_CTRL		4	/* PM control and status register */
+#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
+#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
+#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
+#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
+#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
+#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
+#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER	7	/* (??) */
+#define PCI_PM_SIZEOF		8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION		2	/* BCD version number */
+#define PCI_AGP_RFU		3	/* Rest of capability flags */
+#define PCI_AGP_STATUS		4	/* Status register */
+#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
+#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
+#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
+#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
+#define PCI_AGP_COMMAND		8	/* Control register */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
+#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
+#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
+#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
+#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
+#define PCI_AGP_SIZEOF		12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
+#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
+
+/* Slot Identification */
+
+#define PCI_SID_ESR		2	/* Expansion Slot Register */
+#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
+#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS		2	/* Various flags */
+#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
+#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
+#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
+#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
+#define  PCI_MSI_FLAGS_MASKBIT	0x100	/* 64-bit mask bits allowed */
+#define PCI_MSI_RFU		3	/* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
+#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_BIT	16	/* Mask bits register */
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR		2	/* Control and Status Register */
+#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
+#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
+#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
+#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
+#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
+
+/* PCI-X registers */
+
+#define PCI_X_CMD		2	/* Modes & Features */
+#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS		4	/* PCI-X capabilities */
+#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
+#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
+#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
+#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
+#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
+#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS		2	/* Capabilities register */
+#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
+#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
+#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
+#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
+#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
+#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
+#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
+#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
+#define PCI_EXP_DEVCAP		4	/* Device capabilities */
+#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCTL		8	/* Device Control */
+#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
+#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
+#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
+#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
+#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
+#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
+#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
+#define PCI_EXP_DEVSTA		10	/* Device Status */
+#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
+#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
+#define PCI_EXP_LNKCTL		16	/* Link Control */
+#define PCI_EXP_LNKSTA		18	/* Link Status */
+#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
+#define PCI_EXP_SLTCTL		24	/* Slot Control */
+#define PCI_EXP_SLTSTA		26	/* Slot Status */
+#define PCI_EXP_RTCTL		28	/* Root Control */
+#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP		30	/* Root Capabilities */
+#define PCI_EXP_RTSTA		32	/* Root Status */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR	1
+#define PCI_EXT_CAP_ID_VC	2
+#define PCI_EXT_CAP_ID_DSN	3
+#define PCI_EXT_CAP_ID_PWR	4
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
+#define  PCI_ERR_UNC_TRAIN	0x00000001	/* Training */
+#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
+#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
+#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
+#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
+#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
+#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
+#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
+#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
+#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
+#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
+#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
+	/* Same bits as above */
+#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
+#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
+#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
+#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
+#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
+#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
+#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
+#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
+#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
+#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
+#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
+#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+#define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_SRC	52
+#define PCI_ERR_ROOT_SRC	54
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1	4
+#define PCI_VC_PORT_REG2	8
+#define PCI_VC_PORT_CTRL	12
+#define PCI_VC_PORT_STATUS	14
+#define PCI_VC_RES_CAP		16
+#define PCI_VC_RES_CTRL		20
+#define PCI_VC_RES_STATUS	26
+
+/* Power Budgeting */
+#define PCI_PWR_DSR		4	/* Data Select Register */
+#define PCI_PWR_DATA		8	/* Data Register */
+#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
+#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
+#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
+#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
+#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
+#define PCI_PWR_CAP		12	/* Capability */
+#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
+
+/* Include the ID list */
+
+#include <linux/pci_ids.h>
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot,func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+
+/* File state for mmap()s on /proc/bus/pci/X/Y */
+enum pci_mmap_state {
+	pci_mmap_io,
+	pci_mmap_mem
+};
+
+/* This defines the direction arg to the DMA mapping routines. */
+#define PCI_DMA_BIDIRECTIONAL	0
+#define PCI_DMA_TODEVICE	1
+#define PCI_DMA_FROMDEVICE	2
+#define PCI_DMA_NONE		3
+
+#define DEVICE_COUNT_COMPATIBLE	4
+#define DEVICE_COUNT_RESOURCE	12
+
+typedef int __bitwise pci_power_t;
+
+#define PCI_D0	((pci_power_t __force) 0)
+#define PCI_D1	((pci_power_t __force) 1)
+#define PCI_D2	((pci_power_t __force) 2)
+#define PCI_D3hot	((pci_power_t __force) 3)
+#define PCI_D3cold	((pci_power_t __force) 4)
+
+/*
+ * The pci_dev structure is used to describe PCI devices.
+ */
+struct pci_dev {
+	struct list_head global_list;	/* node in list of all PCI devices */
+	struct list_head bus_list;	/* node in per-bus list */
+	struct pci_bus	*bus;		/* bus this device is on */
+	struct pci_bus	*subordinate;	/* bus this device bridges to */
+
+	void		*sysdata;	/* hook for sys-specific extension */
+	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
+
+	unsigned int	devfn;		/* encoded device & function index */
+	unsigned short	vendor;
+	unsigned short	device;
+	unsigned short	subsystem_vendor;
+	unsigned short	subsystem_device;
+	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
+	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
+	u8		rom_base_reg;	/* which config register controls the ROM */
+
+	struct pci_driver *driver;	/* which driver has allocated this device */
+	u64		dma_mask;	/* Mask of the bits of bus address this
+					   device implements.  Normally this is
+					   0xffffffff.  You only need to change
+					   this if your device has broken DMA
+					   or supports 64-bit transfers.  */
+
+	pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
+					   this is D0-D3, D0 being fully functional,
+					   and D3 being off. */
+
+	struct	device	dev;		/* Generic device interface */
+
+	/* device is compatible with these IDs */
+	unsigned short vendor_compatible[DEVICE_COUNT_COMPATIBLE];
+	unsigned short device_compatible[DEVICE_COUNT_COMPATIBLE];
+
+	int		cfg_size;	/* Size of configuration space */
+
+	/*
+	 * Instead of touching interrupt line and base address registers
+	 * directly, use the values stored here. They might be different!
+	 */
+	unsigned int	irq;
+	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+
+	/* These fields are used by common fixups */
+	unsigned int	transparent:1;	/* Transparent PCI bridge */
+	unsigned int	multifunction:1;/* Part of multi-function device */
+	/* keep track of device state */
+	unsigned int	is_enabled:1;	/* pci_enable_device has been called */
+	unsigned int	is_busmaster:1; /* device is busmaster */
+	
+	u32		saved_config_space[16]; /* config space saved at suspend time */
+	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
+	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
+	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+#ifdef CONFIG_PCI_NAMES
+#define PCI_NAME_SIZE	255
+#define PCI_NAME_HALF	__stringify(43)	/* less than half to handle slop */
+	char		pretty_name[PCI_NAME_SIZE];	/* pretty name for users to see */
+#endif
+};
+
+#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
+#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list)
+#define	to_pci_dev(n) container_of(n, struct pci_dev, dev)
+#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
+
+/*
+ *  For PCI devices, the region numbers are assigned this way:
+ *
+ *	0-5	standard PCI regions
+ *	6	expansion ROM
+ *	7-10	bridges: address space assigned to buses behind the bridge
+ */
+
+#define PCI_ROM_RESOURCE 6
+#define PCI_BRIDGE_RESOURCES 7
+#define PCI_NUM_RESOURCES 11
+
+#ifndef PCI_BUS_NUM_RESOURCES
+#define PCI_BUS_NUM_RESOURCES 4
+#endif
+  
+#define PCI_REGION_FLAG_MASK 0x0fU	/* These bits of resource flags tell us the PCI region flags */
+
+struct pci_bus {
+	struct list_head node;		/* node in list of buses */
+	struct pci_bus	*parent;	/* parent bus this bridge is on */
+	struct list_head children;	/* list of child buses */
+	struct list_head devices;	/* list of devices on this bus */
+	struct pci_dev	*self;		/* bridge device as seen by parent */
+	struct resource	*resource[PCI_BUS_NUM_RESOURCES];
+					/* address space routed to this bus */
+
+	struct pci_ops	*ops;		/* configuration access functions */
+	void		*sysdata;	/* hook for sys-specific extension */
+	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/pci */
+
+	unsigned char	number;		/* bus number */
+	unsigned char	primary;	/* number of primary bridge */
+	unsigned char	secondary;	/* number of secondary bridge */
+	unsigned char	subordinate;	/* max number of subordinate buses */
+
+	char		name[48];
+
+	unsigned short  bridge_ctl;	/* manage NO_ISA/FBB/et al behaviors */
+	unsigned short  pad2;
+	struct device		*bridge;
+	struct class_device	class_dev;
+	struct bin_attribute	*legacy_io; /* legacy I/O for this bus */
+	struct bin_attribute	*legacy_mem; /* legacy mem */
+};
+
+#define pci_bus_b(n)	list_entry(n, struct pci_bus, node)
+#define to_pci_bus(n)	container_of(n, struct pci_bus, class_dev)
+
+/*
+ * Error values that may be returned by PCI functions.
+ */
+#define PCIBIOS_SUCCESSFUL		0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED	0x81
+#define PCIBIOS_BAD_VENDOR_ID		0x83
+#define PCIBIOS_DEVICE_NOT_FOUND	0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER	0x87
+#define PCIBIOS_SET_FAILED		0x88
+#define PCIBIOS_BUFFER_TOO_SMALL	0x89
+
+/* Low-level architecture-dependent routines */
+
+struct pci_ops {
+	int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+	int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+};
+
+struct pci_raw_ops {
+	int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+		    int reg, int len, u32 *val);
+	int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+		     int reg, int len, u32 val);
+};
+
+extern struct pci_raw_ops *raw_pci_ops;
+
+struct pci_bus_region {
+	unsigned long start;
+	unsigned long end;
+};
+
+struct pci_dynids {
+	spinlock_t lock;            /* protects list, index */
+	struct list_head list;      /* for IDs added at runtime */
+	unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+};
+
+struct module;
+struct pci_driver {
+	struct list_head node;
+	char *name;
+	struct module *owner;
+	const struct pci_device_id *id_table;	/* must be non-NULL for probe to be called */
+	int  (*probe)  (struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
+	void (*remove) (struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
+	int  (*suspend) (struct pci_dev *dev, pm_message_t state);	/* Device suspended */
+	int  (*resume) (struct pci_dev *dev);	                /* Device woken up */
+	int  (*enable_wake) (struct pci_dev *dev, u32 state, int enable);   /* Enable wake event */
+
+	struct device_driver	driver;
+	struct pci_dynids dynids;
+};
+
+#define	to_pci_driver(drv) container_of(drv,struct pci_driver, driver)
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device.  The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend,dev) \
+	.vendor = (vend), .device = (dev), \
+	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class.  The vendor, device, subvendor, and subdevice 
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
+	.class = (dev_class), .class_mask = (dev_class_mask), \
+	.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/* 
+ * pci_module_init is obsolete, this stays here till we fix up all usages of it
+ * in the tree.
+ */
+#define pci_module_init	pci_register_driver
+
+/* these external functions are only available when PCI support is enabled */
+#ifdef CONFIG_PCI
+
+extern struct bus_type pci_bus_type;
+
+/* Do NOT directly access these two variables, unless you are arch specific pci
+ * code, or pci core code. */
+extern struct list_head pci_root_buses;	/* list of all known PCI buses */
+extern struct list_head pci_devices;	/* list of all devices */
+
+void pcibios_fixup_bus(struct pci_bus *);
+int pcibios_enable_device(struct pci_dev *, int mask);
+char *pcibios_setup (char *str);
+
+/* Used only when drivers/pci/setup.c is used */
+void pcibios_align_resource(void *, struct resource *,
+			    unsigned long, unsigned long);
+void pcibios_update_irq(struct pci_dev *, int irq);
+
+/* Generic PCI functions used internally */
+
+extern struct pci_bus *pci_find_bus(int domain, int busnr);
+struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata);
+static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
+{
+	return pci_scan_bus_parented(NULL, bus, ops, sysdata);
+}
+int pci_scan_slot(struct pci_bus *bus, int devfn);
+struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn);
+unsigned int pci_scan_child_bus(struct pci_bus *bus);
+void pci_bus_add_device(struct pci_dev *dev);
+void pci_bus_add_devices(struct pci_bus *bus);
+void pci_name_device(struct pci_dev *dev);
+char *pci_class_name(u32 class);
+void pci_read_bridge_bases(struct pci_bus *child);
+struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res);
+int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
+extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
+extern void pci_dev_put(struct pci_dev *dev);
+extern void pci_remove_bus(struct pci_bus *b);
+extern void pci_remove_bus_device(struct pci_dev *dev);
+
+/* Generic PCI functions exported to card drivers */
+
+struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
+struct pci_dev *pci_find_device_reverse (unsigned int vendor, unsigned int device, const struct pci_dev *from);
+struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
+int pci_find_capability (struct pci_dev *dev, int cap);
+int pci_find_ext_capability (struct pci_dev *dev, int cap);
+struct pci_bus * pci_find_next_bus(const struct pci_bus *from);
+
+struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from);
+struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device,
+				unsigned int ss_vendor, unsigned int ss_device,
+				struct pci_dev *from);
+struct pci_dev *pci_get_slot (struct pci_bus *bus, unsigned int devfn);
+struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from);
+int pci_dev_present(const struct pci_device_id *ids);
+
+int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val);
+int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val);
+int pci_bus_read_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 *val);
+int pci_bus_write_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 val);
+int pci_bus_write_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 val);
+int pci_bus_write_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 val);
+
+static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val)
+{
+	return pci_bus_read_config_byte (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val)
+{
+	return pci_bus_read_config_word (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_dword(struct pci_dev *dev, int where, u32 *val)
+{
+	return pci_bus_read_config_dword (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val)
+{
+	return pci_bus_write_config_byte (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val)
+{
+	return pci_bus_write_config_word (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val)
+{
+	return pci_bus_write_config_dword (dev->bus, dev->devfn, where, val);
+}
+
+int pci_enable_device(struct pci_dev *dev);
+int pci_enable_device_bars(struct pci_dev *dev, int mask);
+void pci_disable_device(struct pci_dev *dev);
+void pci_set_master(struct pci_dev *dev);
+#define HAVE_PCI_SET_MWI
+int pci_set_mwi(struct pci_dev *dev);
+void pci_clear_mwi(struct pci_dev *dev);
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_assign_resource(struct pci_dev *dev, int i);
+
+/* ROM control related routines */
+void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size);
+void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size);
+void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
+void pci_remove_rom(struct pci_dev *pdev);
+
+/* Power management related routines */
+int pci_save_state(struct pci_dev *dev);
+int pci_restore_state(struct pci_dev *dev);
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+
+/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
+void pci_bus_assign_resources(struct pci_bus *bus);
+void pci_bus_size_bridges(struct pci_bus *bus);
+int pci_claim_resource(struct pci_dev *, int);
+void pci_assign_unassigned_resources(void);
+void pdev_enable_device(struct pci_dev *);
+void pdev_sort_resources(struct pci_dev *, struct resource_list *);
+void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
+		    int (*)(struct pci_dev *, u8, u8));
+#define HAVE_PCI_REQ_REGIONS	2
+int pci_request_regions(struct pci_dev *, char *);
+void pci_release_regions(struct pci_dev *);
+int pci_request_region(struct pci_dev *, int, char *);
+void pci_release_region(struct pci_dev *, int);
+
+/* drivers/pci/bus.c */
+int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
+			   unsigned long size, unsigned long align,
+			   unsigned long min, unsigned int type_mask,
+			   void (*alignf)(void *, struct resource *,
+					  unsigned long, unsigned long),
+			   void *alignf_data);
+void pci_enable_bridges(struct pci_bus *bus);
+
+/* New-style probing supporting hot-pluggable devices */
+int pci_register_driver(struct pci_driver *);
+void pci_unregister_driver(struct pci_driver *);
+void pci_remove_behind_bridge(struct pci_dev *);
+struct pci_driver *pci_dev_driver(const struct pci_dev *);
+const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev);
+int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass);
+
+/* kmem_cache style wrapper around pci_alloc_consistent() */
+
+#include <linux/dmapool.h>
+
+#define	pci_pool dma_pool
+#define pci_pool_create(name, pdev, size, align, allocation) \
+		dma_pool_create(name, &pdev->dev, size, align, allocation)
+#define	pci_pool_destroy(pool) dma_pool_destroy(pool)
+#define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
+#define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
+
+#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
+extern struct pci_dev *isa_bridge;
+#endif
+
+struct msix_entry {
+	u16 	vector;	/* kernel uses to write allocated vector */
+	u16	entry;	/* driver uses to specify entry, OS writes */
+};
+
+#ifndef CONFIG_PCI_MSI
+static inline void pci_scan_msi_device(struct pci_dev *dev) {}
+static inline int pci_enable_msi(struct pci_dev *dev) {return -1;}
+static inline void pci_disable_msi(struct pci_dev *dev) {}
+static inline int pci_enable_msix(struct pci_dev* dev,
+	struct msix_entry *entries, int nvec) {return -1;}
+static inline void pci_disable_msix(struct pci_dev *dev) {}
+static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
+#else
+extern void pci_scan_msi_device(struct pci_dev *dev);
+extern int pci_enable_msi(struct pci_dev *dev);
+extern void pci_disable_msi(struct pci_dev *dev);
+extern int pci_enable_msix(struct pci_dev* dev,
+	struct msix_entry *entries, int nvec);
+extern void pci_disable_msix(struct pci_dev *dev);
+extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
+#endif
+
+#endif /* CONFIG_PCI */
+
+/* Include architecture-dependent settings and functions */
+
+#include <asm/pci.h>
+
+/*
+ *  If the system does not have PCI, clearly these return errors.  Define
+ *  these as simple inline functions to avoid hair in drivers.
+ */
+
+#ifndef CONFIG_PCI
+#define _PCI_NOP(o,s,t) \
+	static inline int pci_##o##_config_##s (struct pci_dev *dev, int where, t val) \
+		{ return PCIBIOS_FUNC_NOT_SUPPORTED; }
+#define _PCI_NOP_ALL(o,x)	_PCI_NOP(o,byte,u8 x) \
+				_PCI_NOP(o,word,u16 x) \
+				_PCI_NOP(o,dword,u32 x)
+_PCI_NOP_ALL(read, *)
+_PCI_NOP_ALL(write,)
+
+static inline struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device,
+unsigned int ss_vendor, unsigned int ss_device, struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from)
+{ return NULL; }
+
+#define pci_dev_present(ids)	(0)
+#define pci_dev_put(dev)	do { } while (0)
+
+static inline void pci_set_master(struct pci_dev *dev) { }
+static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; }
+static inline void pci_disable_device(struct pci_dev *dev) { }
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
+static inline int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
+static inline int pci_assign_resource(struct pci_dev *dev, int i) { return -EBUSY;}
+static inline int pci_register_driver(struct pci_driver *drv) { return 0;}
+static inline void pci_unregister_driver(struct pci_driver *drv) { }
+static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
+static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
+static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
+
+/* Power management related routines */
+static inline int pci_save_state(struct pci_dev *dev) { return 0; }
+static inline int pci_restore_state(struct pci_dev *dev) { return 0; }
+static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { return 0; }
+static inline pci_power_t pci_choose_state(struct pci_dev *dev, u32 state) { return PCI_D0; }
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { return 0; }
+
+#define	isa_bridge	((struct pci_dev *)NULL)
+
+#else
+
+/*
+ * PCI domain support.  Sometimes called PCI segment (eg by ACPI),
+ * a PCI domain is defined to be a set of PCI busses which share
+ * configuration space.
+ */
+#ifndef CONFIG_PCI_DOMAINS
+static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 0;
+}
+#endif
+
+#endif /* !CONFIG_PCI */
+
+/* these helpers provide future and backwards compatibility
+ * for accessing popular PCI BAR info */
+#define pci_resource_start(dev,bar)   ((dev)->resource[(bar)].start)
+#define pci_resource_end(dev,bar)     ((dev)->resource[(bar)].end)
+#define pci_resource_flags(dev,bar)   ((dev)->resource[(bar)].flags)
+#define pci_resource_len(dev,bar) \
+	((pci_resource_start((dev),(bar)) == 0 &&	\
+	  pci_resource_end((dev),(bar)) ==		\
+	  pci_resource_start((dev),(bar))) ? 0 :	\
+	  						\
+	 (pci_resource_end((dev),(bar)) -		\
+	  pci_resource_start((dev),(bar)) + 1))
+
+/* Similar to the helpers above, these manipulate per-pci_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *pci_get_drvdata (struct pci_dev *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void pci_set_drvdata (struct pci_dev *pdev, void *data)
+{
+	dev_set_drvdata(&pdev->dev, data);
+}
+
+/* If you want to know what to call your pci_dev, ask this function.
+ * Again, it's a wrapper around the generic device.
+ */
+static inline char *pci_name(struct pci_dev *pdev)
+{
+	return pdev->dev.bus_id;
+}
+
+/* Some archs want to see the pretty pci name, so use this macro */
+#ifdef CONFIG_PCI_NAMES
+#define pci_pretty_name(dev) ((dev)->pretty_name)
+#else
+#define pci_pretty_name(dev) ""
+#endif
+
+/*
+ *  The world is not perfect and supplies us with broken PCI devices.
+ *  For at least a part of these bugs we need a work-around, so both
+ *  generic (drivers/pci/quirks.c) and per-architecture code can define
+ *  fixup hooks to be called for particular buggy devices.
+ */
+
+struct pci_fixup {
+	u16 vendor, device;	/* You can use PCI_ANY_ID here of course */
+	void (*hook)(struct pci_dev *dev);
+};
+
+enum pci_fixup_pass {
+	pci_fixup_early,	/* Before probing BARs */
+	pci_fixup_header,	/* After reading configuration header */
+	pci_fixup_final,	/* Final phase of device fixups */
+	pci_fixup_enable,	/* pci_enable_device() time */
+};
+
+/* Anonymous variables would be nice... */
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook)	\
+	static struct pci_fixup __pci_fixup_##name __attribute_used__	\
+	__attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
+			vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
+			vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
+			vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
+			vendor##device##hook, vendor, device, hook)
+
+
+void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+
+extern int pci_pci_problems;
+#define PCIPCI_FAIL		1
+#define PCIPCI_TRITON		2
+#define PCIPCI_NATOMA		4
+#define PCIPCI_VIAETBF		8
+#define PCIPCI_VSFX		16
+#define PCIPCI_ALIMAGIK		32
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
new file mode 100644
index 000000000000..de33f6724867
--- /dev/null
+++ b/include/linux/pci_ids.h
@@ -0,0 +1,2562 @@
+/*
+ *	PCI Class, Vendor and Device IDs
+ *
+ *	Please keep sorted.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED		0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
+
+#define PCI_BASE_CLASS_STORAGE		0x01
+#define PCI_CLASS_STORAGE_SCSI		0x0100
+#define PCI_CLASS_STORAGE_IDE		0x0101
+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
+#define PCI_CLASS_STORAGE_IPI		0x0103
+#define PCI_CLASS_STORAGE_RAID		0x0104
+#define PCI_CLASS_STORAGE_OTHER		0x0180
+
+#define PCI_BASE_CLASS_NETWORK		0x02
+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
+#define PCI_CLASS_NETWORK_FDDI		0x0202
+#define PCI_CLASS_NETWORK_ATM		0x0203
+#define PCI_CLASS_NETWORK_OTHER		0x0280
+
+#define PCI_BASE_CLASS_DISPLAY		0x03
+#define PCI_CLASS_DISPLAY_VGA		0x0300
+#define PCI_CLASS_DISPLAY_XGA		0x0301
+#define PCI_CLASS_DISPLAY_3D		0x0302
+#define PCI_CLASS_DISPLAY_OTHER		0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
+
+#define PCI_BASE_CLASS_MEMORY		0x05
+#define PCI_CLASS_MEMORY_RAM		0x0500
+#define PCI_CLASS_MEMORY_FLASH		0x0501
+#define PCI_CLASS_MEMORY_OTHER		0x0580
+
+#define PCI_BASE_CLASS_BRIDGE		0x06
+#define PCI_CLASS_BRIDGE_HOST		0x0600
+#define PCI_CLASS_BRIDGE_ISA		0x0601
+#define PCI_CLASS_BRIDGE_EISA		0x0602
+#define PCI_CLASS_BRIDGE_MC		0x0603
+#define PCI_CLASS_BRIDGE_PCI		0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
+#define PCI_CLASS_BRIDGE_NUBUS		0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
+#define PCI_CLASS_BRIDGE_OTHER		0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION	0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
+
+#define PCI_BASE_CLASS_SYSTEM		0x08
+#define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_DMA		0x0801
+#define PCI_CLASS_SYSTEM_TIMER		0x0802
+#define PCI_CLASS_SYSTEM_RTC		0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
+#define PCI_CLASS_SYSTEM_OTHER		0x0880
+
+#define PCI_BASE_CLASS_INPUT		0x09
+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
+#define PCI_CLASS_INPUT_PEN		0x0901
+#define PCI_CLASS_INPUT_MOUSE		0x0902
+#define PCI_CLASS_INPUT_SCANNER		0x0903
+#define PCI_CLASS_INPUT_GAMEPORT	0x0904
+#define PCI_CLASS_INPUT_OTHER		0x0980
+
+#define PCI_BASE_CLASS_DOCKING		0x0a
+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
+#define PCI_CLASS_DOCKING_OTHER		0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR	0x0b
+#define PCI_CLASS_PROCESSOR_386		0x0b00
+#define PCI_CLASS_PROCESSOR_486		0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
+#define PCI_CLASS_PROCESSOR_CO		0x0b40
+
+#define PCI_BASE_CLASS_SERIAL		0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
+#define PCI_CLASS_SERIAL_SSA		0x0c02
+#define PCI_CLASS_SERIAL_USB		0x0c03
+#define PCI_CLASS_SERIAL_FIBER		0x0c04
+#define PCI_CLASS_SERIAL_SMBUS		0x0c05
+
+#define PCI_BASE_CLASS_INTELLIGENT	0x0e
+#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE	0x0f
+#define PCI_CLASS_SATELLITE_TV		0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
+#define PCI_CLASS_SATELLITE_VOICE	0x0f03
+#define PCI_CLASS_SATELLITE_DATA	0x0f04
+
+#define PCI_BASE_CLASS_CRYPT		0x10
+#define PCI_CLASS_CRYPT_NETWORK		0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
+#define PCI_CLASS_CRYPT_OTHER		0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO		0x1100
+#define PCI_CLASS_SP_OTHER		0x1180
+
+#define PCI_CLASS_OTHERS		0xff
+
+/* Vendors and devices.  Sort key: vendor first, device next. */
+
+#define PCI_VENDOR_ID_DYNALINK		0x0675
+#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
+
+#define PCI_VENDOR_ID_BERKOM			0x0871
+#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
+#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
+
+#define PCI_VENDOR_ID_COMPAQ		0x0e11
+#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
+#define PCI_DEVICE_ID_COMPAQ_1280	0x3033
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX	0x4000
+#define PCI_DEVICE_ID_COMPAQ_6010	0x6010
+#define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
+#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
+#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
+#define PCI_DEVICE_ID_COMPAQ_CISSC	0x46
+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
+
+#define PCI_VENDOR_ID_NCR		0x1000
+#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
+#define PCI_DEVICE_ID_NCR_53C810	0x0001
+#define PCI_DEVICE_ID_NCR_53C820	0x0002
+#define PCI_DEVICE_ID_NCR_53C825	0x0003
+#define PCI_DEVICE_ID_NCR_53C815	0x0004
+#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
+#define PCI_DEVICE_ID_NCR_53C860	0x0006
+#define PCI_DEVICE_ID_LSI_53C1510	0x000a
+#define PCI_DEVICE_ID_NCR_53C896	0x000b
+#define PCI_DEVICE_ID_NCR_53C895	0x000c
+#define PCI_DEVICE_ID_NCR_53C885	0x000d
+#define PCI_DEVICE_ID_NCR_53C875	0x000f
+#define PCI_DEVICE_ID_NCR_53C1510	0x0010
+#define PCI_DEVICE_ID_LSI_53C895A	0x0012
+#define PCI_DEVICE_ID_LSI_53C875A	0x0013
+#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
+#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
+#define PCI_DEVICE_ID_LSI_53C1030	0x0030
+#define PCI_DEVICE_ID_LSI_1030_53C1035	0x0032
+#define PCI_DEVICE_ID_LSI_53C1035	0x0040
+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
+#define PCI_DEVICE_ID_LSI_FC909		0x0621
+#define PCI_DEVICE_ID_LSI_FC929		0x0622
+#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
+#define PCI_DEVICE_ID_LSI_FC919		0x0624
+#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
+#define PCI_DEVICE_ID_LSI_FC929X	0x0626
+#define PCI_DEVICE_ID_LSI_FC939X	0x0642
+#define PCI_DEVICE_ID_LSI_FC949X	0x0640
+#define PCI_DEVICE_ID_LSI_FC919X	0x0628
+#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
+#define PCI_DEVICE_ID_LSI_61C102	0x0901
+#define PCI_DEVICE_ID_LSI_63C815	0x1000
+#define PCI_DEVICE_ID_LSI_SAS1064	0x0050
+#define PCI_DEVICE_ID_LSI_SAS1066	0x005E
+#define PCI_DEVICE_ID_LSI_SAS1068	0x0054
+#define PCI_DEVICE_ID_LSI_SAS1064A	0x005C
+#define PCI_DEVICE_ID_LSI_SAS1064E	0x0056
+#define PCI_DEVICE_ID_LSI_SAS1066E	0x005A
+#define PCI_DEVICE_ID_LSI_SAS1068E	0x0058
+#define PCI_DEVICE_ID_LSI_SAS1078	0x0060
+
+#define PCI_VENDOR_ID_ATI		0x1002
+/* Mach64 */
+#define PCI_DEVICE_ID_ATI_68800		0x4158
+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
+#define PCI_DEVICE_ID_ATI_215ET222	0x4554
+/* Mach64 / Rage */
+#define PCI_DEVICE_ID_ATI_215GB		0x4742
+#define PCI_DEVICE_ID_ATI_215GD		0x4744
+#define PCI_DEVICE_ID_ATI_215GI		0x4749
+#define PCI_DEVICE_ID_ATI_215GP		0x4750
+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
+#define PCI_DEVICE_ID_ATI_215XL		0x4752
+#define PCI_DEVICE_ID_ATI_215GT		0x4754
+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
+#define PCI_DEVICE_ID_ATI_215_IV	0x4756
+#define PCI_DEVICE_ID_ATI_215_IW	0x4757
+#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
+#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
+#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
+#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
+#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
+#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
+#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
+#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
+#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
+#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
+/* Mach64 VT */
+#define PCI_DEVICE_ID_ATI_264VT		0x5654
+#define PCI_DEVICE_ID_ATI_264VU		0x5655
+#define PCI_DEVICE_ID_ATI_264VV		0x5656
+/* Rage128 GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
+#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
+#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x5247
+/* Rage128 VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
+#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
+#define PCI_DEVICE_ID_ATI_RAGE128_SE	0x5345
+#define PCI_DEVICE_ID_ATI_RAGE128_SF	0x5346
+#define PCI_DEVICE_ID_ATI_RAGE128_SG	0x5347
+#define PCI_DEVICE_ID_ATI_RAGE128_SH	0x5348
+#define PCI_DEVICE_ID_ATI_RAGE128_SK	0x534b
+#define PCI_DEVICE_ID_ATI_RAGE128_SL	0x534c
+#define PCI_DEVICE_ID_ATI_RAGE128_SM	0x534d
+#define PCI_DEVICE_ID_ATI_RAGE128_SN	0x534e
+/* Rage128 Ultra */
+#define PCI_DEVICE_ID_ATI_RAGE128_TF	0x5446
+#define PCI_DEVICE_ID_ATI_RAGE128_TL	0x544c
+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
+#define PCI_DEVICE_ID_ATI_RAGE128_TS	0x5453
+#define PCI_DEVICE_ID_ATI_RAGE128_TT	0x5454
+#define PCI_DEVICE_ID_ATI_RAGE128_TU	0x5455
+/* Rage128 M3 */
+#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
+#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
+/* Rage128 M4 */
+#define PCI_DEVICE_ID_ATI_RAGE128_MF    0x4d46
+#define PCI_DEVICE_ID_ATI_RAGE128_ML    0x4d4c
+/* Rage128 Pro GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_PA	0x5041
+#define PCI_DEVICE_ID_ATI_RAGE128_PB	0x5042
+#define PCI_DEVICE_ID_ATI_RAGE128_PC	0x5043
+#define PCI_DEVICE_ID_ATI_RAGE128_PD	0x5044
+#define PCI_DEVICE_ID_ATI_RAGE128_PE	0x5045
+#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
+/* Rage128 Pro VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
+#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
+#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
+#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
+#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
+#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
+#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
+#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
+#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
+#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
+#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
+#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
+#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
+#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
+#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
+#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
+#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
+#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
+/* Rage128 M4 */
+#define PCI_DEVICE_ID_ATI_RADEON_LE	0x4d45
+#define PCI_DEVICE_ID_ATI_RADEON_LF	0x4d46
+/* Radeon R100 */
+#define PCI_DEVICE_ID_ATI_RADEON_QD	0x5144
+#define PCI_DEVICE_ID_ATI_RADEON_QE	0x5145
+#define PCI_DEVICE_ID_ATI_RADEON_QF	0x5146
+#define PCI_DEVICE_ID_ATI_RADEON_QG	0x5147
+/* Radeon RV100 (VE) */
+#define PCI_DEVICE_ID_ATI_RADEON_QY	0x5159
+#define PCI_DEVICE_ID_ATI_RADEON_QZ	0x515a
+/* Radeon R200 (8500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QL	0x514c
+#define PCI_DEVICE_ID_ATI_RADEON_QN	0x514e
+#define PCI_DEVICE_ID_ATI_RADEON_QO	0x514f
+#define PCI_DEVICE_ID_ATI_RADEON_Ql	0x516c
+#define PCI_DEVICE_ID_ATI_RADEON_BB	0x4242
+/* Radeon R200 (9100) */
+#define PCI_DEVICE_ID_ATI_RADEON_QM	0x514d
+/* Radeon RV200 (7500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QW	0x5157
+#define PCI_DEVICE_ID_ATI_RADEON_QX	0x5158
+/* Radeon NV-100 */
+#define PCI_DEVICE_ID_ATI_RADEON_N1	0x5159
+#define PCI_DEVICE_ID_ATI_RADEON_N2	0x515a
+/* Radeon RV250 (9000) */
+#define PCI_DEVICE_ID_ATI_RADEON_Id	0x4964
+#define PCI_DEVICE_ID_ATI_RADEON_Ie	0x4965
+#define PCI_DEVICE_ID_ATI_RADEON_If	0x4966
+#define PCI_DEVICE_ID_ATI_RADEON_Ig	0x4967
+/* Radeon RV280 (9200) */
+#define PCI_DEVICE_ID_ATI_RADEON_Y_	0x5960
+#define PCI_DEVICE_ID_ATI_RADEON_Ya	0x5961
+#define PCI_DEVICE_ID_ATI_RADEON_Yd	0x5964
+/* Radeon R300 (9500) */
+#define PCI_DEVICE_ID_ATI_RADEON_AD	0x4144
+/* Radeon R300 (9700) */
+#define PCI_DEVICE_ID_ATI_RADEON_ND	0x4e44
+#define PCI_DEVICE_ID_ATI_RADEON_NE	0x4e45
+#define PCI_DEVICE_ID_ATI_RADEON_NF	0x4e46
+#define PCI_DEVICE_ID_ATI_RADEON_NG	0x4e47
+#define PCI_DEVICE_ID_ATI_RADEON_AE	0x4145
+#define PCI_DEVICE_ID_ATI_RADEON_AF	0x4146
+/* Radeon R350 (9800) */
+#define PCI_DEVICE_ID_ATI_RADEON_NH	0x4e48
+#define PCI_DEVICE_ID_ATI_RADEON_NI	0x4e49
+/* Radeon RV350 (9600) */
+#define PCI_DEVICE_ID_ATI_RADEON_AP	0x4150
+#define PCI_DEVICE_ID_ATI_RADEON_AR	0x4152
+/* Radeon M6 */
+#define PCI_DEVICE_ID_ATI_RADEON_LY	0x4c59
+#define PCI_DEVICE_ID_ATI_RADEON_LZ	0x4c5a
+/* Radeon M7 */
+#define PCI_DEVICE_ID_ATI_RADEON_LW	0x4c57
+#define PCI_DEVICE_ID_ATI_RADEON_LX	0x4c58
+/* Radeon M9 */
+#define PCI_DEVICE_ID_ATI_RADEON_Ld	0x4c64
+#define PCI_DEVICE_ID_ATI_RADEON_Le	0x4c65
+#define PCI_DEVICE_ID_ATI_RADEON_Lf	0x4c66
+#define PCI_DEVICE_ID_ATI_RADEON_Lg	0x4c67
+/* Radeon */
+#define PCI_DEVICE_ID_ATI_RADEON_RA	0x5144
+#define PCI_DEVICE_ID_ATI_RADEON_RB	0x5145
+#define PCI_DEVICE_ID_ATI_RADEON_RC	0x5146
+#define PCI_DEVICE_ID_ATI_RADEON_RD	0x5147
+/* RadeonIGP */
+#define PCI_DEVICE_ID_ATI_RS100		0xcab0
+#define PCI_DEVICE_ID_ATI_RS200		0xcab2
+#define PCI_DEVICE_ID_ATI_RS200_B	0xcbb2
+#define PCI_DEVICE_ID_ATI_RS250		0xcab3
+#define PCI_DEVICE_ID_ATI_RS300_100	0x5830
+#define PCI_DEVICE_ID_ATI_RS300_133	0x5831
+#define PCI_DEVICE_ID_ATI_RS300_166	0x5832
+#define PCI_DEVICE_ID_ATI_RS300_200	0x5833
+#define PCI_DEVICE_ID_ATI_RS350_100     0x7830
+#define PCI_DEVICE_ID_ATI_RS350_133     0x7831
+#define PCI_DEVICE_ID_ATI_RS350_166     0x7832
+#define PCI_DEVICE_ID_ATI_RS350_200     0x7833
+#define PCI_DEVICE_ID_ATI_RS400_100     0x5a30
+#define PCI_DEVICE_ID_ATI_RS400_133     0x5a31
+#define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
+#define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
+#define PCI_DEVICE_ID_ATI_RS480         0x5950
+/* ATI IXP Chipset */
+#define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
+#define PCI_DEVICE_ID_ATI_IXP300_IDE	0x4369
+#define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
+#define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
+#define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
+
+#define PCI_VENDOR_ID_VLSI		0x1004
+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
+
+#define PCI_VENDOR_ID_ADL		0x1005
+#define PCI_DEVICE_ID_ADL_2301		0x2301
+
+#define PCI_VENDOR_ID_NS		0x100b
+#define PCI_DEVICE_ID_NS_87415		0x0002
+#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
+#define PCI_DEVICE_ID_NS_87560_USB	0x0012
+#define PCI_DEVICE_ID_NS_83815		0x0020
+#define PCI_DEVICE_ID_NS_83820		0x0022
+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE	0x0500
+#define PCI_DEVICE_ID_NS_SCx200_SMI	0x0501
+#define PCI_DEVICE_ID_NS_SCx200_IDE	0x0502
+#define PCI_DEVICE_ID_NS_SCx200_AUDIO	0x0503
+#define PCI_DEVICE_ID_NS_SCx200_VIDEO	0x0504
+#define PCI_DEVICE_ID_NS_SCx200_XBUS	0x0505
+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE	0x0510
+#define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
+#define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
+#define PCI_DEVICE_ID_NS_87410		0xd001
+
+#define PCI_VENDOR_ID_TSENG		0x100c
+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
+
+#define PCI_VENDOR_ID_WEITEK		0x100e
+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
+
+#define PCI_VENDOR_ID_DEC		0x1011
+#define PCI_DEVICE_ID_DEC_BRD		0x0001
+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+#define PCI_DEVICE_ID_DEC_TGA		0x0004
+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+#define PCI_DEVICE_ID_DEC_21142		0x0019
+#define PCI_DEVICE_ID_DEC_21052		0x0021
+#define PCI_DEVICE_ID_DEC_21150		0x0022
+#define PCI_DEVICE_ID_DEC_21152		0x0024
+#define PCI_DEVICE_ID_DEC_21153		0x0025
+#define PCI_DEVICE_ID_DEC_21154		0x0026
+#define PCI_DEVICE_ID_DEC_21285		0x1065
+#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
+
+#define PCI_VENDOR_ID_CIRRUS		0x1013
+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
+#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
+#define PCI_DEVICE_ID_CIRRUS_7542	0x1200
+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
+#define PCI_DEVICE_ID_CIRRUS_7541	0x1204
+
+#define PCI_VENDOR_ID_IBM		0x1014
+#define PCI_DEVICE_ID_IBM_FIRE_CORAL	0x000a
+#define PCI_DEVICE_ID_IBM_TR		0x0018
+#define PCI_DEVICE_ID_IBM_82G2675	0x001d
+#define PCI_DEVICE_ID_IBM_MCA		0x0020
+#define PCI_DEVICE_ID_IBM_82351		0x0022
+#define PCI_DEVICE_ID_IBM_PYTHON	0x002d
+#define PCI_DEVICE_ID_IBM_SERVERAID	0x002e
+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
+#define PCI_DEVICE_ID_IBM_MPIC		0x0046
+#define PCI_DEVICE_ID_IBM_3780IDSP	0x007d
+#define PCI_DEVICE_ID_IBM_CHUKAR	0x0096
+#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
+#define PCI_DEVICE_ID_IBM_CPC710_PCI32	0x0105
+#define	PCI_DEVICE_ID_IBM_405GP		0x0156
+#define PCI_DEVICE_ID_IBM_SNIPE		0x0180
+#define PCI_DEVICE_ID_IBM_SERVERAIDI960	0x01bd
+#define PCI_DEVICE_ID_IBM_CITRINE		0x028C
+#define PCI_DEVICE_ID_IBM_GEMSTONE		0xB166
+#define PCI_DEVICE_ID_IBM_MPIC_2	0xffff
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1	0x0031
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2	0x0219
+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX		0x021A
+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
+
+#define PCI_VENDOR_ID_COMPEX2		0x101a // pci.ids says "AT&T GIS (NCR)"
+#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
+
+#define PCI_VENDOR_ID_WD		0x101c
+#define PCI_DEVICE_ID_WD_7197		0x3296
+#define PCI_DEVICE_ID_WD_90C		0xc24a
+
+#define PCI_VENDOR_ID_AMI		0x101e
+#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
+#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
+#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
+
+#define PCI_VENDOR_ID_AMD		0x1022
+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
+#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
+#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
+#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
+#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
+#define PCI_DEVICE_ID_AMD_FE_GATE_700D	0x700D
+#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
+#define PCI_DEVICE_ID_AMD_FE_GATE_700F	0x700F
+#define PCI_DEVICE_ID_AMD_COBRA_7400	0x7400
+#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
+#define PCI_DEVICE_ID_AMD_COBRA_7403	0x7403
+#define PCI_DEVICE_ID_AMD_COBRA_7404	0x7404
+#define PCI_DEVICE_ID_AMD_VIPER_7408	0x7408
+#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
+#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
+#define PCI_DEVICE_ID_AMD_VIPER_740C	0x740C
+#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
+#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
+#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
+#define PCI_DEVICE_ID_AMD_VIPER_7414	0x7414
+#define PCI_DEVICE_ID_AMD_OPUS_7440	0x7440
+#	define PCI_DEVICE_ID_AMD_VIPER_7440	PCI_DEVICE_ID_AMD_OPUS_7440
+#define PCI_DEVICE_ID_AMD_OPUS_7441	0x7441
+#	define PCI_DEVICE_ID_AMD_VIPER_7441	PCI_DEVICE_ID_AMD_OPUS_7441
+#define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
+#	define PCI_DEVICE_ID_AMD_VIPER_7443	PCI_DEVICE_ID_AMD_OPUS_7443
+#define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
+#define PCI_DEVICE_ID_AMD_OPUS_7448	0x7448
+# define	PCI_DEVICE_ID_AMD_VIPER_7448	PCI_DEVICE_ID_AMD_OPUS_7448
+#define PCI_DEVICE_ID_AMD_OPUS_7449	0x7449
+#	define PCI_DEVICE_ID_AMD_VIPER_7449	PCI_DEVICE_ID_AMD_OPUS_7449
+#define PCI_DEVICE_ID_AMD_8111_LAN	0x7462
+#define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
+#define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
+#define PCI_DEVICE_ID_AMD_8111_SMBUS2	0x746a
+#define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
+#define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
+#define PCI_DEVICE_ID_AMD_8151_0	0x7454
+#define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
+
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
+#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
+#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
+#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
+#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
+#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
+#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
+#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
+#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
+#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
+#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
+
+#define PCI_VENDOR_ID_AI		0x1025
+#define PCI_DEVICE_ID_AI_M1435		0x1435
+
+#define PCI_VENDOR_ID_DELL		0x1028
+#define PCI_DEVICE_ID_DELL_RACIII	0x0008
+#define PCI_DEVICE_ID_DELL_RAC4		0x0012
+
+#define PCI_VENDOR_ID_MATROX		0x102B
+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
+#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
+#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
+#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
+#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
+#define	PCI_DEVICE_ID_MATROX_G400	0x0525
+#define PCI_DEVICE_ID_MATROX_G550	0x2527
+#define PCI_DEVICE_ID_MATROX_VIA	0x4536
+
+#define PCI_VENDOR_ID_CT		0x102c
+#define PCI_DEVICE_ID_CT_69000		0x00c0
+#define PCI_DEVICE_ID_CT_65545		0x00d8
+#define PCI_DEVICE_ID_CT_65548		0x00dc
+#define PCI_DEVICE_ID_CT_65550		0x00e0
+#define PCI_DEVICE_ID_CT_65554		0x00e4
+#define PCI_DEVICE_ID_CT_65555		0x00e5
+
+#define PCI_VENDOR_ID_MIRO		0x1031
+#define PCI_DEVICE_ID_MIRO_36050	0x5601
+#define PCI_DEVICE_ID_MIRO_DC10PLUS	0x7efe
+#define PCI_DEVICE_ID_MIRO_DC30PLUS	0xd801
+
+#define PCI_VENDOR_ID_NEC		0x1033
+#define PCI_DEVICE_ID_NEC_CBUS_1	0x0001 /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_LOCAL		0x0002 /* Local Bridge */
+#define PCI_DEVICE_ID_NEC_ATM		0x0003 /* ATM LAN Controller */
+#define PCI_DEVICE_ID_NEC_R4000		0x0004 /* R4000 Bridge */
+#define PCI_DEVICE_ID_NEC_486		0x0005 /* 486 Like Peripheral Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_1	0x0006 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_UXBUS		0x0007 /* UX-Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_2	0x0008 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_GRAPH		0x0009 /* PCI-CoreGraph Bridge */
+#define PCI_DEVICE_ID_NEC_VL		0x0016 /* PCI-VL Bridge */
+#define PCI_DEVICE_ID_NEC_STARALPHA2	0x002c /* STAR ALPHA2 */
+#define PCI_DEVICE_ID_NEC_CBUS_2	0x002d /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_USB		0x0035 /* PCI-USB Host */
+#define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
+#define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
+#define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
+#define PCI_DEVICE_ID_NEC_NILE4		0x005a
+#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
+#define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
+#define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6
+#define PCI_DEVICE_ID_NEC_PC9821CS01    0x800c /* PC-9821-CS01 */
+#define PCI_DEVICE_ID_NEC_PC9821NRB06   0x800d /* PC-9821NR-B06 */
+
+#define PCI_VENDOR_ID_FD		0x1036
+#define PCI_DEVICE_ID_FD_36C70		0x0000
+
+#define PCI_VENDOR_ID_SI		0x1039
+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
+#define PCI_DEVICE_ID_SI_6202		0x0002
+#define PCI_DEVICE_ID_SI_503		0x0008
+#define PCI_DEVICE_ID_SI_ACPI		0x0009
+#define PCI_DEVICE_ID_SI_SMBUS		0x0016
+#define PCI_DEVICE_ID_SI_LPC		0x0018
+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
+#define PCI_DEVICE_ID_SI_6205		0x0205
+#define PCI_DEVICE_ID_SI_501		0x0406
+#define PCI_DEVICE_ID_SI_496		0x0496
+#define PCI_DEVICE_ID_SI_300		0x0300
+#define PCI_DEVICE_ID_SI_315H		0x0310
+#define PCI_DEVICE_ID_SI_315		0x0315
+#define PCI_DEVICE_ID_SI_315PRO		0x0325
+#define PCI_DEVICE_ID_SI_530		0x0530
+#define PCI_DEVICE_ID_SI_540		0x0540
+#define PCI_DEVICE_ID_SI_550		0x0550
+#define PCI_DEVICE_ID_SI_540_VGA	0x5300
+#define PCI_DEVICE_ID_SI_550_VGA	0x5315
+#define PCI_DEVICE_ID_SI_601		0x0601
+#define PCI_DEVICE_ID_SI_620		0x0620
+#define PCI_DEVICE_ID_SI_630		0x0630
+#define PCI_DEVICE_ID_SI_633		0x0633
+#define PCI_DEVICE_ID_SI_635		0x0635
+#define PCI_DEVICE_ID_SI_640		0x0640
+#define PCI_DEVICE_ID_SI_645		0x0645
+#define PCI_DEVICE_ID_SI_646		0x0646
+#define PCI_DEVICE_ID_SI_648		0x0648
+#define PCI_DEVICE_ID_SI_650		0x0650
+#define PCI_DEVICE_ID_SI_651		0x0651
+#define PCI_DEVICE_ID_SI_652		0x0652
+#define PCI_DEVICE_ID_SI_655		0x0655
+#define PCI_DEVICE_ID_SI_661		0x0661
+#define PCI_DEVICE_ID_SI_730		0x0730
+#define PCI_DEVICE_ID_SI_733		0x0733
+#define PCI_DEVICE_ID_SI_630_VGA	0x6300
+#define PCI_DEVICE_ID_SI_730_VGA	0x7300
+#define PCI_DEVICE_ID_SI_735		0x0735
+#define PCI_DEVICE_ID_SI_740		0x0740
+#define PCI_DEVICE_ID_SI_741		0x0741
+#define PCI_DEVICE_ID_SI_745		0x0745
+#define PCI_DEVICE_ID_SI_746		0x0746
+#define PCI_DEVICE_ID_SI_748		0x0748
+#define PCI_DEVICE_ID_SI_750		0x0750
+#define PCI_DEVICE_ID_SI_751		0x0751
+#define PCI_DEVICE_ID_SI_752		0x0752
+#define PCI_DEVICE_ID_SI_755		0x0755
+#define PCI_DEVICE_ID_SI_760		0x0760
+#define PCI_DEVICE_ID_SI_900		0x0900
+#define PCI_DEVICE_ID_SI_961		0x0961
+#define PCI_DEVICE_ID_SI_962		0x0962
+#define PCI_DEVICE_ID_SI_963		0x0963
+#define PCI_DEVICE_ID_SI_5107		0x5107
+#define PCI_DEVICE_ID_SI_5300		0x5300
+#define PCI_DEVICE_ID_SI_5511		0x5511
+#define PCI_DEVICE_ID_SI_5513		0x5513
+#define PCI_DEVICE_ID_SI_5518		0x5518
+#define PCI_DEVICE_ID_SI_5571		0x5571
+#define PCI_DEVICE_ID_SI_5581		0x5581
+#define PCI_DEVICE_ID_SI_5582		0x5582
+#define PCI_DEVICE_ID_SI_5591		0x5591
+#define PCI_DEVICE_ID_SI_5596		0x5596
+#define PCI_DEVICE_ID_SI_5597		0x5597
+#define PCI_DEVICE_ID_SI_5598		0x5598
+#define PCI_DEVICE_ID_SI_5600		0x5600
+#define PCI_DEVICE_ID_SI_6300		0x6300
+#define PCI_DEVICE_ID_SI_6306		0x6306
+#define PCI_DEVICE_ID_SI_6326		0x6326
+#define PCI_DEVICE_ID_SI_7001		0x7001
+#define PCI_DEVICE_ID_SI_7012		0x7012
+#define PCI_DEVICE_ID_SI_7016		0x7016
+
+#define PCI_VENDOR_ID_HP		0x103c
+#define PCI_DEVICE_ID_HP_VISUALIZE_EG	0x1005
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6	0x1006
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4	0x1008
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2	0x100a
+#define PCI_DEVICE_ID_HP_TACHYON	0x1028
+#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
+#define PCI_DEVICE_ID_HP_J2585A		0x1030
+#define PCI_DEVICE_ID_HP_J2585B		0x1031
+#define PCI_DEVICE_ID_HP_J2973A		0x1040
+#define PCI_DEVICE_ID_HP_J2970A		0x1042
+#define PCI_DEVICE_ID_HP_DIVA		0x1048
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1	0x1049
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2	0x104A
+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO	0x104B
+#define PCI_DEVICE_ID_HP_PCI_LBA	0x1054
+#define PCI_DEVICE_ID_HP_REO_SBA	0x10f0
+#define PCI_DEVICE_ID_HP_REO_IOC	0x10f1
+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE	0x108b
+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME	0x1223
+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE	0x1226
+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR	0x1227
+#define PCI_DEVICE_ID_HP_ZX1_SBA	0x1229
+#define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
+#define PCI_DEVICE_ID_HP_PCIX_LBA	0x122e
+#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
+#define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
+#define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
+#define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
+#define PCI_DEVICE_ID_HP_CISSA		0x3220
+#define PCI_DEVICE_ID_HP_CISSB		0x3230
+#define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
+
+#define PCI_VENDOR_ID_PCTECH		0x1042
+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0	0x3000
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1	0x3010
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
+
+#define PCI_VENDOR_ID_ASUSTEK		0x1043
+#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
+
+#define PCI_VENDOR_ID_DPT		0x1044
+#define PCI_DEVICE_ID_DPT		0xa400
+
+#define PCI_VENDOR_ID_OPTI		0x1045
+#define PCI_DEVICE_ID_OPTI_92C178	0xc178
+#define PCI_DEVICE_ID_OPTI_82C557	0xc557
+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
+#define PCI_DEVICE_ID_OPTI_82C701	0xc701
+#define PCI_DEVICE_ID_OPTI_82C814	0xc814
+#define PCI_DEVICE_ID_OPTI_82C822	0xc822
+#define PCI_DEVICE_ID_OPTI_82C861	0xc861
+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
+
+#define PCI_VENDOR_ID_ELSA		0x1048
+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
+
+#define PCI_VENDOR_ID_SGS		0x104a
+#define PCI_DEVICE_ID_SGS_2000		0x0008
+#define PCI_DEVICE_ID_SGS_1764		0x0009
+
+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
+
+#define PCI_VENDOR_ID_TI		0x104c
+#define PCI_DEVICE_ID_TI_TVP4010	0x3d04
+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
+#define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_1130		0xac12
+#define PCI_DEVICE_ID_TI_1031		0xac13
+#define PCI_DEVICE_ID_TI_1131		0xac15
+#define PCI_DEVICE_ID_TI_1250		0xac16
+#define PCI_DEVICE_ID_TI_1220		0xac17
+#define PCI_DEVICE_ID_TI_1221		0xac19
+#define PCI_DEVICE_ID_TI_1210		0xac1a
+#define PCI_DEVICE_ID_TI_1450		0xac1b
+#define PCI_DEVICE_ID_TI_1225		0xac1c
+#define PCI_DEVICE_ID_TI_1251A		0xac1d
+#define PCI_DEVICE_ID_TI_1211		0xac1e
+#define PCI_DEVICE_ID_TI_1251B		0xac1f
+#define PCI_DEVICE_ID_TI_4410		0xac41
+#define PCI_DEVICE_ID_TI_4451		0xac42
+#define PCI_DEVICE_ID_TI_4510		0xac44
+#define PCI_DEVICE_ID_TI_4520		0xac46
+#define PCI_DEVICE_ID_TI_1410		0xac50
+#define PCI_DEVICE_ID_TI_1420		0xac51
+#define PCI_DEVICE_ID_TI_1451A		0xac52
+#define PCI_DEVICE_ID_TI_1620		0xac54
+#define PCI_DEVICE_ID_TI_1520		0xac55
+#define PCI_DEVICE_ID_TI_1510		0xac56
+
+#define PCI_VENDOR_ID_SONY		0x104d
+#define PCI_DEVICE_ID_SONY_CXD3222	0x8039
+
+#define PCI_VENDOR_ID_OAK		0x104e
+#define PCI_DEVICE_ID_OAK_OTI107	0x0107
+
+/* Winbond have two vendor IDs! See 0x10ad as well */
+#define PCI_VENDOR_ID_WINBOND2		0x1050
+#define PCI_DEVICE_ID_WINBOND2_89C940	0x0940
+#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
+
+#define PCI_VENDOR_ID_ANIGMA		0x1051
+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
+  
+#define PCI_VENDOR_ID_EFAR		0x1055
+#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0	0x9460
+#define PCI_DEVICE_ID_EFAR_SLC90E66_2	0x9462
+#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
+
+#define PCI_VENDOR_ID_MOTOROLA		0x1057
+#define PCI_VENDOR_ID_MOTOROLA_OOPS	0x1507
+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
+#define PCI_DEVICE_ID_MOTOROLA_MPC107	0x0004
+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
+#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
+#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
+#define PCI_DEVICE_ID_MOTOROLA_CPX8216	0x4806
+#define PCI_DEVICE_ID_MOTOROLA_HARRIER	0x480b
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200	0x5803
+
+#define PCI_VENDOR_ID_PROMISE		0x105a
+#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
+#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
+#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
+#define PCI_DEVICE_ID_PROMISE_20263	0x0D38
+#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
+#define PCI_DEVICE_ID_PROMISE_20268R	0x6268
+#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
+#define PCI_DEVICE_ID_PROMISE_20270	0x6268
+#define PCI_DEVICE_ID_PROMISE_20271	0x6269
+#define PCI_DEVICE_ID_PROMISE_20275	0x1275
+#define PCI_DEVICE_ID_PROMISE_20276	0x5275
+#define PCI_DEVICE_ID_PROMISE_20277	0x7275
+#define PCI_DEVICE_ID_PROMISE_5300	0x5300
+
+#define PCI_VENDOR_ID_N9		0x105d
+#define PCI_DEVICE_ID_N9_I128		0x2309
+#define PCI_DEVICE_ID_N9_I128_2		0x2339
+#define PCI_DEVICE_ID_N9_I128_T2R	0x493d
+
+#define PCI_VENDOR_ID_UMC		0x1060
+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
+#define PCI_DEVICE_ID_UMC_UM8891A	0x0891
+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
+#define PCI_DEVICE_ID_UMC_UM8881F	0x8881
+#define PCI_DEVICE_ID_UMC_UM8886F	0x8886
+#define PCI_DEVICE_ID_UMC_UM9017F	0x9017
+#define PCI_DEVICE_ID_UMC_UM8886N	0xe886
+#define PCI_DEVICE_ID_UMC_UM8891N	0xe891
+
+#define PCI_VENDOR_ID_X			0x1061
+#define PCI_DEVICE_ID_X_AGX016		0x0001
+
+#define PCI_VENDOR_ID_MYLEX		0x1069
+#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
+#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
+#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
+#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
+#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
+#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
+
+#define PCI_VENDOR_ID_PICOP		0x1066
+#define PCI_DEVICE_ID_PICOP_PT86C52X	0x0001
+#define PCI_DEVICE_ID_PICOP_PT80C524	0x8002
+
+#define PCI_VENDOR_ID_APPLE		0x106b
+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
+#define PCI_DEVICE_ID_APPLE_GC		0x0002
+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
+#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
+#define PCI_DEVICE_ID_APPLE_KL_USB	0x0019
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
+#define PCI_DEVICE_ID_APPLE_KEYLARGO	0x0022
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP	0x0024
+#define PCI_DEVICE_ID_APPLE_KEYLARGO_P	0x0025
+#define PCI_DEVICE_ID_APPLE_KL_USB_P	0x0026
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P	0x0027
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15	0x002d
+#define PCI_DEVICE_ID_APPLE_UNI_N_FW2	0x0030
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2	0x0032
+#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA	0x0033
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2	0x0034
+#define PCI_DEVICE_ID_APPLE_IPID_ATA100	0x003b
+#define PCI_DEVICE_ID_APPLE_KEYLARGO_I	0x003e
+#define PCI_DEVICE_ID_APPLE_K2_ATA100	0x0043
+#define PCI_DEVICE_ID_APPLE_U3_AGP	0x004b
+#define PCI_DEVICE_ID_APPLE_K2_GMAC	0x004c
+#define PCI_DEVICE_ID_APPLE_SH_ATA      0x0050
+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM   0x0051
+#define PCI_DEVICE_ID_APPLE_SH_FW       0x0052
+#define PCI_DEVICE_ID_APPLE_U3L_AGP	0x0058
+#define PCI_DEVICE_ID_APPLE_U3H_AGP	0x0059
+#define PCI_DEVICE_ID_APPLE_TIGON3	0x1645
+
+#define PCI_VENDOR_ID_YAMAHA		0x1073
+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
+
+#define PCI_VENDOR_ID_NEXGEN		0x1074
+#define PCI_DEVICE_ID_NEXGEN_82C501	0x4e78
+
+#define PCI_VENDOR_ID_QLOGIC		0x1077
+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
+#define PCI_DEVICE_ID_QLOGIC_ISP1022	0x1022
+#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
+#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
+
+#define PCI_VENDOR_ID_CYRIX		0x1078
+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
+#define PCI_DEVICE_ID_CYRIX_5530_SMI	0x0101
+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
+
+#define PCI_VENDOR_ID_LEADTEK		0x107d
+#define PCI_DEVICE_ID_LEADTEK_805	0x0000
+
+#define PCI_VENDOR_ID_INTERPHASE	0x107e
+#define PCI_DEVICE_ID_INTERPHASE_5526	0x0004
+#define PCI_DEVICE_ID_INTERPHASE_55x6	0x0005
+#define PCI_DEVICE_ID_INTERPHASE_5575	0x0008
+
+#define PCI_VENDOR_ID_CONTAQ		0x1080
+#define PCI_DEVICE_ID_CONTAQ_82C599	0x0600
+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
+
+#define PCI_VENDOR_ID_FOREX		0x1083
+
+#define PCI_VENDOR_ID_OLICOM		0x108d
+#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
+#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
+
+#define PCI_VENDOR_ID_SUN		0x108e
+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
+#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
+#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
+#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
+#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
+#define PCI_DEVICE_ID_SUN_GEM		0x2bad
+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
+#define PCI_DEVICE_ID_SUN_PBM		0x8000
+#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
+#define PCI_DEVICE_ID_SUN_TOMATILLO	0xa801
+
+#define PCI_VENDOR_ID_CMD		0x1095
+#define PCI_DEVICE_ID_CMD_640		0x0640
+#define PCI_DEVICE_ID_CMD_643		0x0643
+#define PCI_DEVICE_ID_CMD_646		0x0646
+#define PCI_DEVICE_ID_CMD_647		0x0647
+#define PCI_DEVICE_ID_CMD_648		0x0648
+#define PCI_DEVICE_ID_CMD_649		0x0649
+#define PCI_DEVICE_ID_CMD_670		0x0670
+#define PCI_DEVICE_ID_CMD_680		0x0680
+
+#define PCI_DEVICE_ID_SII_680		0x0680
+#define PCI_DEVICE_ID_SII_3112		0x3112
+#define PCI_DEVICE_ID_SII_1210SA	0x0240
+
+#define PCI_VENDOR_ID_VISION		0x1098
+#define PCI_DEVICE_ID_VISION_QD8500	0x0001
+#define PCI_DEVICE_ID_VISION_QD8580	0x0002
+
+#define PCI_VENDOR_ID_BROOKTREE		0x109e
+#define PCI_DEVICE_ID_BROOKTREE_848	0x0350
+#define PCI_DEVICE_ID_BROOKTREE_849A	0x0351
+#define PCI_DEVICE_ID_BROOKTREE_878_1	0x036e
+#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
+#define PCI_DEVICE_ID_BROOKTREE_8474	0x8474
+
+#define PCI_VENDOR_ID_SIERRA		0x10a8
+#define PCI_DEVICE_ID_SIERRA_STB	0x0000
+
+#define PCI_VENDOR_ID_SGI		0x10a9
+#define PCI_DEVICE_ID_SGI_IOC3		0x0003
+#define PCI_DEVICE_ID_SGI_IOC4		0x100a
+#define PCI_VENDOR_ID_SGI_LITHIUM	0x1002
+
+#define PCI_VENDOR_ID_ACC		0x10aa
+#define PCI_DEVICE_ID_ACC_2056		0x0000
+
+#define PCI_VENDOR_ID_WINBOND		0x10ad
+#define PCI_DEVICE_ID_WINBOND_83769	0x0001
+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+
+#define PCI_VENDOR_ID_DATABOOK		0x10b3
+#define PCI_DEVICE_ID_DATABOOK_87144	0xb106
+
+#define PCI_VENDOR_ID_PLX		0x10b5
+#define PCI_DEVICE_ID_PLX_R685		0x1030
+#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
+#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
+#define PCI_DEVICE_ID_PLX_1077		0x1077
+#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
+#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
+#define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_9030		0x9030
+#define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9060		0x9060
+#define PCI_DEVICE_ID_PLX_9060ES	0x906E
+#define PCI_DEVICE_ID_PLX_9060SD	0x906D
+#define PCI_DEVICE_ID_PLX_9080		0x9080
+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
+
+#define PCI_VENDOR_ID_MADGE		0x10b6
+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
+#define PCI_DEVICE_ID_MADGE_C155S	0x1001
+
+#define PCI_VENDOR_ID_3COM		0x10b7
+#define PCI_DEVICE_ID_3COM_3C985	0x0001
+#define PCI_DEVICE_ID_3COM_3C940	0x1700
+#define PCI_DEVICE_ID_3COM_3C339	0x3390
+#define PCI_DEVICE_ID_3COM_3C359	0x3590
+#define PCI_DEVICE_ID_3COM_3C590	0x5900
+#define PCI_DEVICE_ID_3COM_3C595TX	0x5950
+#define PCI_DEVICE_ID_3COM_3C595T4	0x5951
+#define PCI_DEVICE_ID_3COM_3C595MII	0x5952
+#define PCI_DEVICE_ID_3COM_3C940B	0x80eb
+#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
+#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
+#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
+#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
+#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
+#define PCI_DEVICE_ID_3COM_3CR990	0x9900
+#define PCI_DEVICE_ID_3COM_3CR990_TX_95	0x9902
+#define PCI_DEVICE_ID_3COM_3CR990_TX_97	0x9903
+#define PCI_DEVICE_ID_3COM_3CR990B	0x9904
+#define PCI_DEVICE_ID_3COM_3CR990_FX	0x9905
+#define PCI_DEVICE_ID_3COM_3CR990SVR95	0x9908
+#define PCI_DEVICE_ID_3COM_3CR990SVR97	0x9909
+#define PCI_DEVICE_ID_3COM_3CR990SVR	0x990a
+
+#define PCI_VENDOR_ID_SMC		0x10b8
+#define PCI_DEVICE_ID_SMC_EPIC100	0x0005
+
+#define PCI_VENDOR_ID_AL		0x10b9
+#define PCI_DEVICE_ID_AL_M1445		0x1445
+#define PCI_DEVICE_ID_AL_M1449		0x1449
+#define PCI_DEVICE_ID_AL_M1451		0x1451
+#define PCI_DEVICE_ID_AL_M1461		0x1461
+#define PCI_DEVICE_ID_AL_M1489		0x1489
+#define PCI_DEVICE_ID_AL_M1511		0x1511
+#define PCI_DEVICE_ID_AL_M1513		0x1513
+#define PCI_DEVICE_ID_AL_M1521		0x1521
+#define PCI_DEVICE_ID_AL_M1523		0x1523
+#define PCI_DEVICE_ID_AL_M1531		0x1531
+#define PCI_DEVICE_ID_AL_M1533		0x1533
+#define PCI_DEVICE_ID_AL_M1535 		0x1535
+#define PCI_DEVICE_ID_AL_M1541		0x1541
+#define PCI_DEVICE_ID_AL_M1543		0x1543
+#define PCI_DEVICE_ID_AL_M1563		0x1563
+#define PCI_DEVICE_ID_AL_M1621		0x1621
+#define PCI_DEVICE_ID_AL_M1631		0x1631
+#define PCI_DEVICE_ID_AL_M1632		0x1632
+#define PCI_DEVICE_ID_AL_M1641		0x1641
+#define PCI_DEVICE_ID_AL_M1644		0x1644
+#define PCI_DEVICE_ID_AL_M1647		0x1647
+#define PCI_DEVICE_ID_AL_M1651		0x1651
+#define PCI_DEVICE_ID_AL_M1671		0x1671
+#define PCI_DEVICE_ID_AL_M1681		0x1681
+#define PCI_DEVICE_ID_AL_M1683		0x1683
+#define PCI_DEVICE_ID_AL_M1689		0x1689
+#define PCI_DEVICE_ID_AL_M3307		0x3307
+#define PCI_DEVICE_ID_AL_M4803		0x5215
+#define PCI_DEVICE_ID_AL_M5219		0x5219
+#define PCI_DEVICE_ID_AL_M5228		0x5228
+#define PCI_DEVICE_ID_AL_M5229		0x5229
+#define PCI_DEVICE_ID_AL_M5237		0x5237
+#define PCI_DEVICE_ID_AL_M5243		0x5243
+#define PCI_DEVICE_ID_AL_M5451		0x5451
+#define PCI_DEVICE_ID_AL_M7101		0x7101
+
+#define PCI_VENDOR_ID_MITSUBISHI	0x10ba
+
+#define PCI_VENDOR_ID_SURECOM		0x10bd
+#define PCI_DEVICE_ID_SURECOM_NE34	0x0e34
+
+#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV       0x0005
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS   0x0083
+
+#define PCI_VENDOR_ID_ASP		0x10cd
+#define PCI_DEVICE_ID_ASP_ABP940	0x1200
+#define PCI_DEVICE_ID_ASP_ABP940U	0x1300
+#define PCI_DEVICE_ID_ASP_ABP940UW	0x2300
+
+#define PCI_VENDOR_ID_MACRONIX		0x10d9
+#define PCI_DEVICE_ID_MACRONIX_MX98713	0x0512
+#define PCI_DEVICE_ID_MACRONIX_MX987x5	0x0531
+
+#define PCI_VENDOR_ID_TCONRAD		0x10da
+#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
+
+#define PCI_VENDOR_ID_CERN		0x10dc
+#define PCI_DEVICE_ID_CERN_SPSB_PMC	0x0001
+#define PCI_DEVICE_ID_CERN_SPSB_PCI	0x0002
+#define PCI_DEVICE_ID_CERN_HIPPI_DST	0x0021
+#define PCI_DEVICE_ID_CERN_HIPPI_SRC	0x0022
+
+#define PCI_VENDOR_ID_NVIDIA			0x10de
+#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
+#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
+#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN        0x002a
+#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
+#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
+#define PCI_DEVICE_ID_NVIDIA_NVENET_10		0x0037
+#define PCI_DEVICE_ID_NVIDIA_NVENET_11		0x0038
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE    0x0042
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT    0x0045
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000     0x004E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS	0x0052
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
+#define PCI_DEVICE_ID_NVIDIA_NVENET_8		0x0056
+#define PCI_DEVICE_ID_NVIDIA_NVENET_9		0x0057
+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
+#define PCI_DEVICE_ID_NVIDIA_NVENET_2		0x0066
+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
+#define PCI_DEVICE_ID_NVIDIA_NVENET_4		0x0086
+#define PCI_DEVICE_ID_NVIDIA_NVENET_5		0x008c
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
+#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
+#define PCI_DEVICE_ID_GEFORCE_6800A             0x00c1
+#define PCI_DEVICE_ID_GEFORCE_6800A_LE          0x00c2
+#define PCI_DEVICE_ID_GEFORCE_GO_6800           0x00c8
+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA     0x00c9
+#define PCI_DEVICE_ID_QUADRO_FX_GO1400          0x00cc
+#define PCI_DEVICE_ID_QUADRO_FX_1400            0x00ce
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
+#define PCI_DEVICE_ID_NVIDIA_NVENET_3		0x00d6
+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
+#define PCI_DEVICE_ID_NVIDIA_NVENET_7		0x00df
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
+#define PCI_DEVICE_ID_NVIDIA_NVENET_6		0x00e6
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
+#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO	0x0112
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT	0x0140
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600	0x0141
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL	0x0145
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540	0x014E
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200	0x014F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200    0x0164
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250    0x0166
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1  0x0167
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1  0x0168
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460	0x0170
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440	0x0171
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420	0x0172
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE	0x0173
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO	0x0174
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO	0x0175
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO    0x0177
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL	0x0178
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200	0x017A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL	0x017B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL	0x017C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO    0x0186
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO    0x0187
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL    0x0188
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC    0x0189
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS    0x018A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL    0x018B
+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2		0x01a0
+#define PCI_DEVICE_ID_NVIDIA_NFORCE		0x01a4
+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO		0x01b1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
+#define PCI_DEVICE_ID_NVIDIA_NVENET_1		0x01c3
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2		0x0202
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC		0x0203
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B      0x0211
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE   0x0212
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT   0x0215
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600	0x0250
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400	0x0251
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200	0x0253
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO       0x0286
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL        0x0288
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL        0x0289
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL       0x028C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA  0x0301
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800        0x0302
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000         0x0308
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000         0x0309
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA  0x0311
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600        0x0312
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE      0x0314
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600      0x031A
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650      0x031B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700        0x031C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200        0x0320
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA  0x0321
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1      0x0322
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE      0x0323
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200      0x0324
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250      0x0325
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500        0x0326
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100        0x0327
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32   0x0328
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200	    0x0329
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI     0x032A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500          0x032B
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300      0x032C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100      0x032D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA  0x0330
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900        0x0331
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT      0x0332
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA  0x0333
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT      0x0334
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000         0x0338
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700          0x033F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA  0x0341
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700        0x0342
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE      0x0343
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE      0x0344
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1    0x0347
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
+
+#define PCI_VENDOR_ID_IMS		0x10e0
+#define PCI_DEVICE_ID_IMS_8849		0x8849
+#define PCI_DEVICE_ID_IMS_TT128		0x9128
+#define PCI_DEVICE_ID_IMS_TT3D		0x9135
+
+#define PCI_VENDOR_ID_TEKRAM2		0x10e1
+#define PCI_DEVICE_ID_TEKRAM2_690c	0x690c
+
+#define PCI_VENDOR_ID_TUNDRA		0x10e3
+#define PCI_DEVICE_ID_TUNDRA_CA91C042	0x0000
+
+#define PCI_VENDOR_ID_AMCC		0x10e8
+#define PCI_DEVICE_ID_AMCC_MYRINET	0x8043
+#define PCI_DEVICE_ID_AMCC_PARASTATION	0x8062
+#define PCI_DEVICE_ID_AMCC_S5933	0x807d
+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3	0x809c
+
+#define PCI_VENDOR_ID_INTERG		0x10ea
+#define PCI_DEVICE_ID_INTERG_1680	0x1680
+#define PCI_DEVICE_ID_INTERG_1682	0x1682
+#define PCI_DEVICE_ID_INTERG_2000	0x2000
+#define PCI_DEVICE_ID_INTERG_2010	0x2010
+#define PCI_DEVICE_ID_INTERG_5000	0x5000
+#define PCI_DEVICE_ID_INTERG_5050	0x5050
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8029	0x8029
+#define PCI_DEVICE_ID_REALTEK_8129	0x8129
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+#define PCI_DEVICE_ID_REALTEK_8169	0x8169
+
+#define PCI_VENDOR_ID_XILINX		0x10ee
+#define PCI_DEVICE_ID_TURBOPAM		0x4020
+
+#define PCI_VENDOR_ID_TRUEVISION	0x10fa
+#define PCI_DEVICE_ID_TRUEVISION_T1000	0x000c
+
+#define PCI_VENDOR_ID_INIT		0x1101
+#define PCI_DEVICE_ID_INIT_320P		0x9100
+#define PCI_DEVICE_ID_INIT_360P		0x9500
+
+#define PCI_VENDOR_ID_CREATIVE		0x1102 // duplicate: ECTIVA
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+
+#define PCI_VENDOR_ID_ECTIVA		0x1102 // duplicate: CREATIVE
+#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
+
+#define PCI_VENDOR_ID_TTI		0x1103
+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
+#define PCI_DEVICE_ID_TTI_HPT366	0x0004
+#define PCI_DEVICE_ID_TTI_HPT372	0x0005
+#define PCI_DEVICE_ID_TTI_HPT302	0x0006
+#define PCI_DEVICE_ID_TTI_HPT371	0x0007
+#define PCI_DEVICE_ID_TTI_HPT374	0x0008
+#define PCI_DEVICE_ID_TTI_HPT372N	0x0009	// apparently a 372N variant?
+
+#define PCI_VENDOR_ID_VIA		0x1106
+#define PCI_DEVICE_ID_VIA_8763_0	0x0198
+#define PCI_DEVICE_ID_VIA_8380_0	0x0204
+#define PCI_DEVICE_ID_VIA_3238_0	0x0238
+#define PCI_DEVICE_ID_VIA_PT880		0x0258
+#define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
+#define PCI_DEVICE_ID_VIA_3269_0	0x0269
+#define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
+#define PCI_DEVICE_ID_VIA_8363_0	0x0305
+#define PCI_DEVICE_ID_VIA_8371_0	0x0391
+#define PCI_DEVICE_ID_VIA_8501_0	0x0501
+#define PCI_DEVICE_ID_VIA_82C505	0x0505
+#define PCI_DEVICE_ID_VIA_82C561	0x0561
+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
+#define PCI_DEVICE_ID_VIA_82C576	0x0576
+#define PCI_DEVICE_ID_VIA_82C585	0x0585
+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
+#define PCI_DEVICE_ID_VIA_82C595	0x0595
+#define PCI_DEVICE_ID_VIA_82C596	0x0596
+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
+#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
+#define PCI_DEVICE_ID_VIA_8601_0	0x0601
+#define PCI_DEVICE_ID_VIA_8605_0	0x0605
+#define PCI_DEVICE_ID_VIA_82C680	0x0680
+#define PCI_DEVICE_ID_VIA_82C686	0x0686
+#define PCI_DEVICE_ID_VIA_82C691_0	0x0691
+#define PCI_DEVICE_ID_VIA_82C693	0x0693
+#define PCI_DEVICE_ID_VIA_82C693_1	0x0698
+#define PCI_DEVICE_ID_VIA_82C926	0x0926
+#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
+#define PCI_DEVICE_ID_VIA_82C595_97	0x1595
+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
+#define PCI_DEVICE_ID_VIA_6305		0x3044
+#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
+#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
+#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
+#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
+#define PCI_DEVICE_ID_VIA_8233_5	0x3059
+#define PCI_DEVICE_ID_VIA_8233_7	0x3065
+#define PCI_DEVICE_ID_VIA_82C686_6	0x3068
+#define PCI_DEVICE_ID_VIA_8233_0	0x3074
+#define PCI_DEVICE_ID_VIA_8633_0	0x3091
+#define PCI_DEVICE_ID_VIA_8367_0	0x3099
+#define PCI_DEVICE_ID_VIA_8653_0	0x3101
+#define PCI_DEVICE_ID_VIA_8622		0x3102
+#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
+#define PCI_DEVICE_ID_VIA_8361		0x3112
+#define PCI_DEVICE_ID_VIA_XM266		0x3116
+#define PCI_DEVICE_ID_VIA_612X		0x3119
+#define PCI_DEVICE_ID_VIA_862X_0	0x3123
+#define PCI_DEVICE_ID_VIA_8753_0	0x3128
+#define PCI_DEVICE_ID_VIA_8233A		0x3147
+#define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
+#define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
+#define PCI_DEVICE_ID_VIA_XN266		0x3156
+#define PCI_DEVICE_ID_VIA_8754C_0	0x3168
+#define PCI_DEVICE_ID_VIA_8235		0x3177
+#define PCI_DEVICE_ID_VIA_P4N333	0x3178
+#define PCI_DEVICE_ID_VIA_8385_0	0x3188
+#define PCI_DEVICE_ID_VIA_8377_0	0x3189
+#define PCI_DEVICE_ID_VIA_8378_0	0x3205
+#define PCI_DEVICE_ID_VIA_8783_0	0x3208
+#define PCI_DEVICE_ID_VIA_P4M400	0x3209
+#define PCI_DEVICE_ID_VIA_8237		0x3227
+#define PCI_DEVICE_ID_VIA_3296_0	0x0296
+#define PCI_DEVICE_ID_VIA_86C100A	0x6100
+#define PCI_DEVICE_ID_VIA_8231		0x8231
+#define PCI_DEVICE_ID_VIA_8231_4	0x8235
+#define PCI_DEVICE_ID_VIA_8365_1	0x8305
+#define PCI_DEVICE_ID_VIA_8371_1	0x8391
+#define PCI_DEVICE_ID_VIA_8501_1	0x8501
+#define PCI_DEVICE_ID_VIA_82C597_1	0x8597
+#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
+#define PCI_DEVICE_ID_VIA_8601_1	0x8601
+#define PCI_DEVICE_ID_VIA_8505_1	0x8605
+#define PCI_DEVICE_ID_VIA_8633_1	0xB091
+#define PCI_DEVICE_ID_VIA_8367_1	0xB099
+#define PCI_DEVICE_ID_VIA_P4X266_1	0xB101
+#define PCI_DEVICE_ID_VIA_8615_1	0xB103
+#define PCI_DEVICE_ID_VIA_8361_1	0xB112
+#define PCI_DEVICE_ID_VIA_8235_1	0xB168
+#define PCI_DEVICE_ID_VIA_838X_1	0xB188
+#define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
+
+#define PCI_VENDOR_ID_SIEMENS           0x110A
+#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
+
+#define PCI_VENDOR_ID_SMC2		0x1113
+#define PCI_DEVICE_ID_SMC2_1211TX	0x1211
+
+#define PCI_VENDOR_ID_VORTEX		0x1119
+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1	0x0110
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1	0x0111
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1	0x0112
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1	0x0113
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1	0x0114
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1	0x0115
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2	0x0120
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2	0x0121
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2	0x0122
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2	0x0123
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2	0x0124
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2	0x0125
+
+#define PCI_VENDOR_ID_EF		0x111a
+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
+#define PCI_VENDOR_ID_EF_ATM_LANAI2	0x0003
+#define PCI_VENDOR_ID_EF_ATM_LANAIHB	0x0005
+
+#define PCI_VENDOR_ID_IDT		0x111d
+#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
+
+#define PCI_VENDOR_ID_FORE		0x1127
+#define PCI_DEVICE_ID_FORE_PCA200PC	0x0210
+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
+
+#define PCI_VENDOR_ID_IMAGINGTECH	0x112f
+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI	0x0000
+
+#define PCI_VENDOR_ID_PHILIPS		0x1131
+#define PCI_DEVICE_ID_PHILIPS_SAA7145	0x7145
+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
+#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
+
+#define PCI_VENDOR_ID_EICON		0x1133
+#define PCI_DEVICE_ID_EICON_DIVA20PRO	0xe001
+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U	0xe003
+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
+#define PCI_DEVICE_ID_EICON_DIVA202	0xe00b
+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
+
+#define PCI_VENDOR_ID_ZIATECH		0x1138
+#define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
+ 
+#define PCI_VENDOR_ID_CYCLONE		0x113c
+#define PCI_DEVICE_ID_CYCLONE_SDK	0x0001
+
+#define PCI_VENDOR_ID_ALLIANCE		0x1142
+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO	0x3210
+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO	0x6422
+#define PCI_DEVICE_ID_ALLIANCE_AT24	0x6424
+#define PCI_DEVICE_ID_ALLIANCE_AT3D	0x643d
+
+#define PCI_VENDOR_ID_SYSKONNECT	0x1148
+#define PCI_DEVICE_ID_SYSKONNECT_FP	0x4000
+#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
+#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
+#define PCI_DEVICE_ID_SYSKONNECT_YU	0x4320
+#define PCI_DEVICE_ID_SYSKONNECT_9DXX	0x4400
+#define PCI_DEVICE_ID_SYSKONNECT_9MXX	0x4500
+
+#define PCI_VENDOR_ID_VMIC		0x114a
+#define PCI_DEVICE_ID_VMIC_VME		0x7587
+
+#define PCI_VENDOR_ID_DIGI		0x114f
+#define PCI_DEVICE_ID_DIGI_EPC		0x0002
+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH	0x0003
+#define PCI_DEVICE_ID_DIGI_XEM		0x0004
+#define PCI_DEVICE_ID_DIGI_XR		0x0005
+#define PCI_DEVICE_ID_DIGI_CX		0x0006
+#define PCI_DEVICE_ID_DIGI_XRJ		0x0009
+#define PCI_DEVICE_ID_DIGI_EPCJ		0x000a
+#define PCI_DEVICE_ID_DIGI_XR_920	0x0027
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
+#define PCI_DEVICE_ID_NEO_2DB9          0x00C8
+#define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
+#define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
+#define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
+
+#define PCI_VENDOR_ID_MUTECH		0x1159
+#define PCI_DEVICE_ID_MUTECH_MV1000	0x0001
+
+#define PCI_VENDOR_ID_XIRCOM		0x115d
+#define PCI_DEVICE_ID_XIRCOM_X3201_ETH	0x0003
+#define PCI_DEVICE_ID_XIRCOM_RBM56G	0x0101
+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
+
+#define PCI_VENDOR_ID_RENDITION		0x1163
+#define PCI_DEVICE_ID_RENDITION_VERITE	0x0001
+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
+
+#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
+#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
+#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30  0x0010
+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221
+#define PCI_DEVICE_ID_SERVERWORKS_GCLE    0x0225
+#define PCI_DEVICE_ID_SERVERWORKS_GCLE2   0x0227
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
+
+#define PCI_VENDOR_ID_SBE		0x1176
+#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
+#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
+#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
+
+#define PCI_VENDOR_ID_TOSHIBA		0x1179
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO	0x0102
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0103
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_601	0x0601
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
+
+#define PCI_VENDOR_ID_TOSHIBA_2		0x102f
+#define PCI_DEVICE_ID_TOSHIBA_TX3927	0x000a
+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TX4927	0x0180
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
+
+#define PCI_VENDOR_ID_RICOH		0x1180
+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
+#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
+
+#define PCI_VENDOR_ID_DLINK		0x1186
+#define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
+
+#define PCI_VENDOR_ID_ARTOP		0x1191
+#define PCI_DEVICE_ID_ARTOP_ATP8400	0x0004
+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
+#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
+#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
+#define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
+#define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
+#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
+#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
+#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
+#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
+#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
+#define PCI_DEVICE_ID_ARTOP_8060	0x8060
+#define PCI_DEVICE_ID_ARTOP_AEC67160	0x8080
+#define PCI_DEVICE_ID_ARTOP_AEC67160_2	0x8081
+#define PCI_DEVICE_ID_ARTOP_AEC67162	0x808a
+
+#define PCI_VENDOR_ID_ZEITNET		0x1193
+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
+
+#define PCI_VENDOR_ID_OMEGA		0x119b
+#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
+
+#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
+#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
+#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
+
+#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
+
+#define PCI_VENDOR_ID_MARVELL		0x11ab
+#define PCI_DEVICE_ID_MARVELL_GT64011	0x4146
+#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
+#define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
+#define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
+#define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
+#define PCI_DEVICE_ID_MARVELL_GT96100	0x9652
+#define PCI_DEVICE_ID_MARVELL_GT96100A	0x9653
+
+#define PCI_VENDOR_ID_LITEON		0x11ad
+#define PCI_DEVICE_ID_LITEON_LNE100TX	0x0002
+
+#define PCI_VENDOR_ID_V3		0x11b0
+#define PCI_DEVICE_ID_V3_V960		0x0001
+#define PCI_DEVICE_ID_V3_V350		0x0001
+#define PCI_DEVICE_ID_V3_V961		0x0002
+#define PCI_DEVICE_ID_V3_V351		0x0002
+
+#define PCI_VENDOR_ID_NP		0x11bc
+#define PCI_DEVICE_ID_NP_PCI_FDDI	0x0001
+
+#define PCI_VENDOR_ID_ATT		0x11c1
+#define PCI_DEVICE_ID_ATT_L56XMF	0x0440
+#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
+
+#define PCI_VENDOR_ID_NEC2		0x11c3 /* NEC (2nd) */
+
+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
+#define PCI_DEVICE_ID_SPECIALIX_XIO	0x4000
+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
+
+#define PCI_VENDOR_ID_AURAVISION	0x11d1
+#define PCI_DEVICE_ID_AURAVISION_VXP524	0x01f7
+
+#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
+#define PCI_DEVICE_ID_AD1889JS		0x1889
+
+#define PCI_VENDOR_ID_IKON		0x11d5
+#define PCI_DEVICE_ID_IKON_10115	0x0115
+#define PCI_DEVICE_ID_IKON_10117	0x0117
+
+#define PCI_VENDOR_ID_SEGA		0x11db
+#define PCI_DEVICE_ID_SEGA_BBA		0x1234
+
+#define PCI_VENDOR_ID_ZORAN		0x11de
+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
+
+#define PCI_VENDOR_ID_KINETIC		0x11f4
+#define PCI_DEVICE_ID_KINETIC_2915	0x2915
+
+#define PCI_VENDOR_ID_COMPEX		0x11f6
+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
+#define PCI_DEVICE_ID_COMPEX_RL2000	0x1401
+
+#define PCI_VENDOR_ID_RP		0x11fe
+#define PCI_DEVICE_ID_RP32INTF		0x0001
+#define PCI_DEVICE_ID_RP8INTF		0x0002
+#define PCI_DEVICE_ID_RP16INTF		0x0003
+#define PCI_DEVICE_ID_RP4QUAD		0x0004
+#define PCI_DEVICE_ID_RP8OCTA		0x0005
+#define PCI_DEVICE_ID_RP8J		0x0006
+#define PCI_DEVICE_ID_RP4J		0x0007
+#define PCI_DEVICE_ID_RP8SNI		0x0008	
+#define PCI_DEVICE_ID_RP16SNI		0x0009	
+#define PCI_DEVICE_ID_RPP4		0x000A
+#define PCI_DEVICE_ID_RPP8		0x000B
+#define PCI_DEVICE_ID_RP8M		0x000C
+#define PCI_DEVICE_ID_RP4M		0x000D
+#define PCI_DEVICE_ID_RP2_232		0x000E
+#define PCI_DEVICE_ID_RP2_422		0x000F
+#define PCI_DEVICE_ID_URP32INTF		0x0801
+#define PCI_DEVICE_ID_URP8INTF		0x0802
+#define PCI_DEVICE_ID_URP16INTF		0x0803
+#define PCI_DEVICE_ID_URP8OCTA		0x0805
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C       
+#define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
+#define PCI_DEVICE_ID_CRP16INTF		0x0903       
+
+#define PCI_VENDOR_ID_CYCLADES		0x120e
+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
+#define PCI_DEVICE_ID_PC300_RX_2	0x0300
+#define PCI_DEVICE_ID_PC300_RX_1	0x0301
+#define PCI_DEVICE_ID_PC300_TE_2	0x0310
+#define PCI_DEVICE_ID_PC300_TE_1	0x0311
+#define PCI_DEVICE_ID_PC300_TE_M_2	0x0320
+#define PCI_DEVICE_ID_PC300_TE_M_1	0x0321
+
+/* Allied Telesyn */
+#define PCI_VENDOR_ID_AT    		0x1259
+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
+
+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
+
+#define PCI_VENDOR_ID_O2		0x1217
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#define PCI_DEVICE_ID_O2_6836		0x6836
+
+#define PCI_VENDOR_ID_3DFX		0x121a
+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
+#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
+#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
+#define PCI_DEVICE_ID_3DFX_VOODOO5	0x0009
+
+#define PCI_VENDOR_ID_SIGMADES		0x1236
+#define PCI_DEVICE_ID_SIGMADES_6425	0x6401
+
+#define PCI_VENDOR_ID_CCUBE		0x123f
+
+#define PCI_VENDOR_ID_AVM		0x1244
+#define PCI_DEVICE_ID_AVM_B1		0x0700
+#define PCI_DEVICE_ID_AVM_C4		0x0800
+#define PCI_DEVICE_ID_AVM_A1		0x0a00
+#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
+#define PCI_DEVICE_ID_AVM_C2		0x1100
+#define PCI_DEVICE_ID_AVM_T1		0x1200
+
+#define PCI_VENDOR_ID_DIPIX		0x1246
+
+#define PCI_VENDOR_ID_STALLION		0x124d
+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
+#define PCI_DEVICE_ID_STALLION_EIOPCI	0x0003
+
+#define PCI_VENDOR_ID_OPTIBASE		0x1255
+#define PCI_DEVICE_ID_OPTIBASE_FORGE	0x1110
+#define PCI_DEVICE_ID_OPTIBASE_FUSION	0x1210
+#define PCI_DEVICE_ID_OPTIBASE_VPLEX	0x2110
+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC	0x2120
+#define PCI_DEVICE_ID_OPTIBASE_VQUEST	0x2130
+
+/* Allied Telesyn */
+#define PCI_VENDOR_ID_AT    		0x1259
+#define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
+
+#define PCI_VENDOR_ID_ESS		0x125d
+#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
+#define PCI_DEVICE_ID_ESS_AUDIOPCI	0x1969
+#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
+
+#define PCI_VENDOR_ID_SATSAGEM		0x1267
+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
+#define PCI_DEVICE_ID_SATSAGEM_PCR2101	0x5352
+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
+
+#define PCI_VENDOR_ID_HUGHES		0x1273
+#define PCI_DEVICE_ID_HUGHES_DIRECPC	0x0002
+
+#define PCI_VENDOR_ID_ENSONIQ		0x1274
+#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
+#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
+#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
+
+#define PCI_VENDOR_ID_TRANSMETA		0x1279
+#define PCI_DEVICE_ID_EFFICEON		0x0060
+
+#define PCI_VENDOR_ID_ROCKWELL		0x127A
+
+#define PCI_VENDOR_ID_ITE		0x1283
+#define PCI_DEVICE_ID_ITE_IT8172G	0x8172
+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
+#define PCI_DEVICE_ID_ITE_8872		0x8872
+#define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
+
+/* formerly Platform Tech */
+#define PCI_VENDOR_ID_ESS_OLD		0x1285
+#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
+
+#define PCI_VENDOR_ID_ALTEON		0x12ae
+#define PCI_DEVICE_ID_ALTEON_ACENIC	0x0001
+
+#define PCI_VENDOR_ID_USR		0x12B9
+
+#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
+
+#define PCI_VENDOR_ID_PICTUREL		0x12c5
+#define PCI_DEVICE_ID_PICTUREL_PCIVST	0x0081
+
+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
+
+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
+
+#define PCI_VENDOR_ID_AUREAL		0x12eb
+#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
+#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE	0x0003
+
+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
+#define PCI_DEVICE_ID_LML_33R10		0x8a02
+
+#define PCI_VENDOR_ID_CBOARDS		0x1307
+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
+
+#define PCI_VENDOR_ID_SIIG		0x131f
+#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
+#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
+#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
+#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
+#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
+#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
+#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
+#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
+#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
+#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
+#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
+#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
+#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
+#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
+#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
+#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
+#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
+#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
+#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
+#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
+#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
+#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
+
+#define PCI_VENDOR_ID_RADISYS		0x1331
+#define PCI_DEVICE_ID_RADISYS_ENP2611	0x0030
+
+#define PCI_VENDOR_ID_DOMEX		0x134a
+#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
+
+#define PCI_VENDOR_ID_QUATECH		0x135C
+#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
+#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
+#define PCI_DEVICE_ID_QUATECH_DSC200	0x0030
+#define PCI_DEVICE_ID_QUATECH_QSC200	0x0040
+#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
+#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
+
+#define PCI_VENDOR_ID_SEALEVEL		0x135e
+#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
+#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
+#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8	0x7804
+
+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS	0x0109
+
+#define PCI_VENDOR_ID_KAWASAKI		0x136b
+#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
+
+#define PCI_VENDOR_ID_CNET		0x1371
+#define PCI_DEVICE_ID_CNET_GIGACARD	0x434e
+
+#define PCI_VENDOR_ID_LMC		0x1376
+#define PCI_DEVICE_ID_LMC_HSSI		0x0003
+#define PCI_DEVICE_ID_LMC_DS3		0x0004
+#define PCI_DEVICE_ID_LMC_SSI		0x0005
+#define PCI_DEVICE_ID_LMC_T1		0x0006
+
+#define PCI_VENDOR_ID_NETGEAR		0x1385
+#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
+#define PCI_DEVICE_ID_NETGEAR_GA622	0x622a
+
+#define PCI_VENDOR_ID_APPLICOM		0x1389
+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
+
+#define PCI_VENDOR_ID_MOXA		0x1393
+#define PCI_DEVICE_ID_MOXA_RC7000	0x0001
+#define PCI_DEVICE_ID_MOXA_CP102	0x1020
+#define PCI_DEVICE_ID_MOXA_CP102UL	0x1021
+#define PCI_DEVICE_ID_MOXA_CP102U	0x1022
+#define PCI_DEVICE_ID_MOXA_C104		0x1040
+#define PCI_DEVICE_ID_MOXA_CP104U	0x1041
+#define PCI_DEVICE_ID_MOXA_CP104JU	0x1042
+#define PCI_DEVICE_ID_MOXA_CT114	0x1140
+#define PCI_DEVICE_ID_MOXA_CP114	0x1141
+#define PCI_DEVICE_ID_MOXA_CP118U	0x1180
+#define PCI_DEVICE_ID_MOXA_CP132	0x1320
+#define PCI_DEVICE_ID_MOXA_CP132U	0x1321
+#define PCI_DEVICE_ID_MOXA_CP134U	0x1340
+#define PCI_DEVICE_ID_MOXA_C168		0x1680
+#define PCI_DEVICE_ID_MOXA_CP168U	0x1681
+#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
+#define PCI_DEVICE_ID_MOXA_C218		0x2180
+#define PCI_DEVICE_ID_MOXA_C320		0x3200
+
+#define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_B000		0xb000
+#define PCI_DEVICE_ID_CCD_B006		0xb006
+#define PCI_DEVICE_ID_CCD_B007		0xb007
+#define PCI_DEVICE_ID_CCD_B008		0xb008
+#define PCI_DEVICE_ID_CCD_B009		0xb009
+#define PCI_DEVICE_ID_CCD_B00A		0xb00a
+#define PCI_DEVICE_ID_CCD_B00B		0xb00b
+#define PCI_DEVICE_ID_CCD_B00C		0xb00c
+#define PCI_DEVICE_ID_CCD_B100		0xb100
+
+#define PCI_VENDOR_ID_EXAR		0x13a8
+#define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
+#define PCI_DEVICE_ID_EXAR_XR17C154	0x0154
+#define PCI_DEVICE_ID_EXAR_XR17C158	0x0158
+
+#define PCI_VENDOR_ID_MICROGATE		0x13c0
+#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
+#define PCI_DEVICE_ID_MICROGATE_SCC	0x0020
+#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
+#define PCI_DEVICE_ID_MICROGATE_USC2	0x0210
+
+#define PCI_VENDOR_ID_3WARE		0x13C1
+#define PCI_DEVICE_ID_3WARE_1000	0x1000
+#define PCI_DEVICE_ID_3WARE_7000	0x1001
+#define PCI_DEVICE_ID_3WARE_9000	0x1002
+
+#define PCI_VENDOR_ID_IOMEGA		0x13ca
+#define PCI_DEVICE_ID_IOMEGA_BUZ	0x4231
+
+#define PCI_VENDOR_ID_ABOCOM		0x13D1
+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
+
+#define PCI_VENDOR_ID_CMEDIA		0x13f6
+#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
+#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
+#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
+#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
+
+#define PCI_VENDOR_ID_LAVA		0x1407
+#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
+#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_A	0x0180 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_B	0x0181 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
+#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
+#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
+#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
+
+#define PCI_VENDOR_ID_TIMEDIA		0x1409
+#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
+
+#define PCI_VENDOR_ID_OXSEMI		0x1415
+#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
+#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
+#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
+
+#define PCI_VENDOR_ID_SAMSUNG		0x144d
+
+#define PCI_VENDOR_ID_AIRONET		0x14b9
+#define PCI_DEVICE_ID_AIRONET_4800_1	0x0001
+#define PCI_DEVICE_ID_AIRONET_4800	0x4500 // values switched?  see
+#define PCI_DEVICE_ID_AIRONET_4500	0x4800 // drivers/net/aironet4500_card.c
+
+#define PCI_VENDOR_ID_TITAN		0x14D2
+#define PCI_DEVICE_ID_TITAN_010L	0x8001
+#define PCI_DEVICE_ID_TITAN_100L	0x8010
+#define PCI_DEVICE_ID_TITAN_110L	0x8011
+#define PCI_DEVICE_ID_TITAN_200L	0x8020
+#define PCI_DEVICE_ID_TITAN_210L	0x8021
+#define PCI_DEVICE_ID_TITAN_400L	0x8040
+#define PCI_DEVICE_ID_TITAN_800L	0x8080
+#define PCI_DEVICE_ID_TITAN_100		0xA001
+#define PCI_DEVICE_ID_TITAN_200		0xA005
+#define PCI_DEVICE_ID_TITAN_400		0xA003
+#define PCI_DEVICE_ID_TITAN_800B	0xA004
+
+#define PCI_VENDOR_ID_PANACOM		0x14d4
+#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
+#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
+
+#define PCI_VENDOR_ID_SIPACKETS		0x14d9
+#define PCI_DEVICE_ID_SP_HT		0x0010
+
+#define PCI_VENDOR_ID_AFAVLAB		0x14db
+#define PCI_DEVICE_ID_AFAVLAB_P028	0x2180
+#define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
+
+#define PCI_VENDOR_ID_BROADCOM		0x14e4
+#define PCI_DEVICE_ID_TIGON3_5700	0x1644
+#define PCI_DEVICE_ID_TIGON3_5701	0x1645
+#define PCI_DEVICE_ID_TIGON3_5702	0x1646
+#define PCI_DEVICE_ID_TIGON3_5703	0x1647
+#define PCI_DEVICE_ID_TIGON3_5704	0x1648
+#define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
+#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
+#define PCI_DEVICE_ID_TIGON3_5705	0x1653
+#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
+#define PCI_DEVICE_ID_TIGON3_5720	0x1658
+#define PCI_DEVICE_ID_TIGON3_5721	0x1659
+#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
+#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
+#define PCI_DEVICE_ID_TIGON3_5705F	0x166e
+#define PCI_DEVICE_ID_TIGON3_5750	0x1676
+#define PCI_DEVICE_ID_TIGON3_5751	0x1677
+#define PCI_DEVICE_ID_TIGON3_5750M	0x167c
+#define PCI_DEVICE_ID_TIGON3_5751M	0x167d
+#define PCI_DEVICE_ID_TIGON3_5751F	0x167e
+#define PCI_DEVICE_ID_TIGON3_5782	0x1696
+#define PCI_DEVICE_ID_TIGON3_5788	0x169c
+#define PCI_DEVICE_ID_TIGON3_5789	0x169d
+#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
+#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
+#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
+#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
+#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
+#define PCI_DEVICE_ID_TIGON3_5781	0x16dd
+#define PCI_DEVICE_ID_TIGON3_5753	0x16f7
+#define PCI_DEVICE_ID_TIGON3_5753M	0x16fd
+#define PCI_DEVICE_ID_TIGON3_5753F	0x16fe
+#define PCI_DEVICE_ID_TIGON3_5901	0x170d
+#define PCI_DEVICE_ID_BCM4401B1		0x170c
+#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
+#define PCI_DEVICE_ID_BCM4401		0x4401
+#define PCI_DEVICE_ID_BCM4401B0		0x4402
+
+#define PCI_VENDOR_ID_TOPIC		0x151f
+#define PCI_DEVICE_ID_TOPIC_TP560	0x0000
+
+#define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_1211		0x1211
+#define PCI_DEVICE_ID_ENE_1225		0x1225
+#define PCI_DEVICE_ID_ENE_1410		0x1410
+#define PCI_DEVICE_ID_ENE_1420		0x1420
+
+#define PCI_VENDOR_ID_SYBA		0x1592
+#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
+#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
+
+#define PCI_VENDOR_ID_MORETON		0x15aa
+#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
+
+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0 
+
+#define PCI_VENDOR_ID_MELLANOX		0x15b3
+#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
+#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
+#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
+
+#define PCI_VENDOR_ID_PDC		0x15e9
+#define PCI_DEVICE_ID_PDC_1841		0x1841
+
+#define PCI_VENDOR_ID_MACROLINK		0x15ed
+#define PCI_DEVICE_ID_MACROLINK_MCCS8	0x1000
+#define PCI_DEVICE_ID_MACROLINK_MCCS	0x1001
+#define PCI_DEVICE_ID_MACROLINK_MCCS8H	0x1002
+#define PCI_DEVICE_ID_MACROLINK_MCCSH	0x1003
+#define PCI_DEVICE_ID_MACROLINK_MCCR8	0x2000
+#define PCI_DEVICE_ID_MACROLINK_MCCR	0x2001
+
+#define PCI_VENDOR_ID_FARSITE           0x1619
+#define PCI_DEVICE_ID_FARSITE_T2P       0x0400
+#define PCI_DEVICE_ID_FARSITE_T4P       0x0440
+#define PCI_DEVICE_ID_FARSITE_T1U       0x0610
+#define PCI_DEVICE_ID_FARSITE_T2U       0x0620
+#define PCI_DEVICE_ID_FARSITE_T4U       0x0640
+#define PCI_DEVICE_ID_FARSITE_TE1       0x1610
+#define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
+
+#define PCI_VENDOR_ID_SIBYTE		0x166d
+#define PCI_DEVICE_ID_BCM1250_HT	0x0002
+
+#define PCI_VENDOR_ID_LINKSYS		0x1737
+#define PCI_DEVICE_ID_LINKSYS_EG1032	0x1032
+#define PCI_DEVICE_ID_LINKSYS_EG1064	0x1064
+
+#define PCI_VENDOR_ID_ALTIMA		0x173b
+#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
+#define PCI_DEVICE_ID_ALTIMA_AC1001	0x03e9
+#define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
+#define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
+
+#define PCI_VENDOR_ID_S2IO		0x17d5
+#define	PCI_DEVICE_ID_S2IO_WIN		0x5731
+#define	PCI_DEVICE_ID_S2IO_UNI		0x5831
+#define PCI_DEVICE_ID_HERC_WIN		0x5732
+#define PCI_DEVICE_ID_HERC_UNI		0x5832
+
+#define PCI_VENDOR_ID_INFINICON		0x1820
+
+#define PCI_VENDOR_ID_TOPSPIN		0x1867
+
+#define PCI_VENDOR_ID_TDI               0x192E
+#define PCI_DEVICE_ID_TDI_EHCI          0x0101
+
+#define PCI_VENDOR_ID_SYMPHONY		0x1c1c
+#define PCI_DEVICE_ID_SYMPHONY_101	0x0001
+
+#define PCI_VENDOR_ID_TEKRAM		0x1de1
+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
+
+#define PCI_VENDOR_ID_HINT             0x3388
+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
+
+#define PCI_VENDOR_ID_3DLABS		0x3d3d
+#define PCI_DEVICE_ID_3DLABS_300SX	0x0001
+#define PCI_DEVICE_ID_3DLABS_500TX	0x0002
+#define PCI_DEVICE_ID_3DLABS_DELTA	0x0003
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA	0x0004
+#define PCI_DEVICE_ID_3DLABS_MX		0x0006
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
+#define PCI_DEVICE_ID_3DLABS_GAMMA	0x0008
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
+
+#define PCI_VENDOR_ID_AVANCE		0x4005
+#define PCI_DEVICE_ID_AVANCE_ALG2064	0x2064
+#define PCI_DEVICE_ID_AVANCE_2302	0x2302
+
+#define PCI_VENDOR_ID_AKS		0x416c
+#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
+#define PCI_DEVICE_ID_AKS_CPC		0x0200
+
+#define PCI_VENDOR_ID_REDCREEK		0x4916
+#define PCI_DEVICE_ID_RC45		0x1960
+
+#define PCI_VENDOR_ID_NETVIN		0x4a14
+#define PCI_DEVICE_ID_NETVIN_NV5000SC	0x5000
+
+#define PCI_VENDOR_ID_S3		0x5333
+#define PCI_DEVICE_ID_S3_PLATO_PXS	0x0551
+#define PCI_DEVICE_ID_S3_ViRGE		0x5631
+#define PCI_DEVICE_ID_S3_TRIO		0x8811
+#define PCI_DEVICE_ID_S3_AURORA64VP	0x8812
+#define PCI_DEVICE_ID_S3_TRIO64UVP	0x8814
+#define PCI_DEVICE_ID_S3_ViRGE_VX	0x883d
+#define PCI_DEVICE_ID_S3_868		0x8880
+#define PCI_DEVICE_ID_S3_928		0x88b0
+#define PCI_DEVICE_ID_S3_864_1		0x88c0
+#define PCI_DEVICE_ID_S3_864_2		0x88c1
+#define PCI_DEVICE_ID_S3_964_1		0x88d0
+#define PCI_DEVICE_ID_S3_964_2		0x88d1
+#define PCI_DEVICE_ID_S3_968		0x88f0
+#define PCI_DEVICE_ID_S3_TRIO64V2	0x8901
+#define PCI_DEVICE_ID_S3_PLATO_PXG	0x8902
+#define PCI_DEVICE_ID_S3_ViRGE_DXGX	0x8a01
+#define PCI_DEVICE_ID_S3_ViRGE_GX2	0x8a10
+#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
+#define PCI_DEVICE_ID_S3_ViRGE_MX	0x8c01
+#define PCI_DEVICE_ID_S3_ViRGE_MXP	0x8c02
+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV	0x8c03
+#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
+
+#define PCI_VENDOR_ID_DUNORD		0x5544
+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
+
+#define PCI_VENDOR_ID_DCI		0x6666
+#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
+#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
+
+#define PCI_VENDOR_ID_DUNORD		0x5544
+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
+
+#define PCI_VENDOR_ID_GENROCO		0x5555
+#define PCI_DEVICE_ID_GENROCO_HFP832	0x0003
+
+#define PCI_VENDOR_ID_INTEL		0x8086
+#define PCI_DEVICE_ID_INTEL_EESSC	0x0008
+#define PCI_DEVICE_ID_INTEL_21145	0x0039
+#define PCI_DEVICE_ID_INTEL_82375	0x0482
+#define PCI_DEVICE_ID_INTEL_82424	0x0483
+#define PCI_DEVICE_ID_INTEL_82378	0x0484
+#define PCI_DEVICE_ID_INTEL_82430	0x0486
+#define PCI_DEVICE_ID_INTEL_82434	0x04a3
+#define PCI_DEVICE_ID_INTEL_I960	0x0960
+#define PCI_DEVICE_ID_INTEL_I960RM	0x0962
+#define PCI_DEVICE_ID_INTEL_82562ET	0x1031
+#define PCI_DEVICE_ID_INTEL_82801CAM	0x1038
+#define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
+#define PCI_DEVICE_ID_INTEL_82815_AB	0x1131
+#define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
+#define PCI_DEVICE_ID_INTEL_82559ER	0x1209
+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
+#define PCI_DEVICE_ID_INTEL_82092AA_1	0x1222
+#define PCI_DEVICE_ID_INTEL_7116	0x1223
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550  
+#define PCI_DEVICE_ID_INTEL_7505_1	0x2552  
+#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
+#define PCI_DEVICE_ID_INTEL_82596	0x1226
+#define PCI_DEVICE_ID_INTEL_82865	0x1227
+#define PCI_DEVICE_ID_INTEL_82557	0x1229
+#define PCI_DEVICE_ID_INTEL_82437	0x122d
+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
+#define PCI_DEVICE_ID_INTEL_82437MX	0x1235
+#define PCI_DEVICE_ID_INTEL_82441	0x1237
+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
+#define PCI_DEVICE_ID_INTEL_82439	0x1250
+#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
+#define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
+#define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
+#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
+#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
+#define PCI_DEVICE_ID_INTEL_82801AA_2	0x2412
+#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
+#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
+#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
+#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
+#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
+#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
+#define PCI_DEVICE_ID_INTEL_82801AB_2	0x2422
+#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
+#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
+#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
+#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
+#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
+#define PCI_DEVICE_ID_INTEL_82801BA_1	0x2442
+#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
+#define PCI_DEVICE_ID_INTEL_82801BA_3	0x2444
+#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
+#define PCI_DEVICE_ID_INTEL_82801BA_5	0x2446
+#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
+#define PCI_DEVICE_ID_INTEL_82801BA_7	0x2449
+#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
+#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
+#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
+#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
+#define PCI_DEVICE_ID_INTEL_82801E_0	0x2450
+#define PCI_DEVICE_ID_INTEL_82801E_2	0x2452
+#define PCI_DEVICE_ID_INTEL_82801E_3	0x2453
+#define PCI_DEVICE_ID_INTEL_82801E_9	0x2459
+#define PCI_DEVICE_ID_INTEL_82801E_11	0x245b
+#define PCI_DEVICE_ID_INTEL_82801E_13	0x245d
+#define PCI_DEVICE_ID_INTEL_82801E_14	0x245e
+#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
+#define PCI_DEVICE_ID_INTEL_82801CA_2	0x2482
+#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
+#define PCI_DEVICE_ID_INTEL_82801CA_4	0x2484
+#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
+#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
+#define PCI_DEVICE_ID_INTEL_82801CA_7	0x2487
+#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
+#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
+#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
+#define PCI_DEVICE_ID_INTEL_82801DB_0	0x24c0
+#define PCI_DEVICE_ID_INTEL_82801DB_1	0x24c1
+#define PCI_DEVICE_ID_INTEL_82801DB_2	0x24c2
+#define PCI_DEVICE_ID_INTEL_82801DB_3	0x24c3
+#define PCI_DEVICE_ID_INTEL_82801DB_4	0x24c4
+#define PCI_DEVICE_ID_INTEL_82801DB_5	0x24c5
+#define PCI_DEVICE_ID_INTEL_82801DB_6	0x24c6
+#define PCI_DEVICE_ID_INTEL_82801DB_7	0x24c7
+#define PCI_DEVICE_ID_INTEL_82801DB_9	0x24c9
+#define PCI_DEVICE_ID_INTEL_82801DB_10	0x24ca
+#define PCI_DEVICE_ID_INTEL_82801DB_11	0x24cb
+#define PCI_DEVICE_ID_INTEL_82801DB_12  0x24cc
+#define PCI_DEVICE_ID_INTEL_82801DB_13	0x24cd
+#define PCI_DEVICE_ID_INTEL_82801EB_0	0x24d0
+#define PCI_DEVICE_ID_INTEL_82801EB_1	0x24d1
+#define PCI_DEVICE_ID_INTEL_82801EB_2	0x24d2
+#define PCI_DEVICE_ID_INTEL_82801EB_3	0x24d3
+#define PCI_DEVICE_ID_INTEL_82801EB_4	0x24d4
+#define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
+#define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
+#define PCI_DEVICE_ID_INTEL_82801EB_7	0x24d7
+#define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
+#define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
+#define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
+#define PCI_DEVICE_ID_INTEL_ESB_3	0x25a3
+#define PCI_DEVICE_ID_INTEL_ESB_31	0x25b0
+#define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
+#define PCI_DEVICE_ID_INTEL_ESB_5	0x25a6
+#define PCI_DEVICE_ID_INTEL_ESB_6	0x25a7
+#define PCI_DEVICE_ID_INTEL_ESB_7	0x25a9
+#define PCI_DEVICE_ID_INTEL_ESB_8	0x25aa
+#define PCI_DEVICE_ID_INTEL_ESB_9	0x25ab
+#define PCI_DEVICE_ID_INTEL_ESB_11	0x25ac
+#define PCI_DEVICE_ID_INTEL_ESB_12	0x25ad
+#define PCI_DEVICE_ID_INTEL_ESB_13	0x25ae
+#define PCI_DEVICE_ID_INTEL_82820_HB	0x2500
+#define PCI_DEVICE_ID_INTEL_82820_UP_HB	0x2501
+#define PCI_DEVICE_ID_INTEL_82850_HB	0x2530
+#define PCI_DEVICE_ID_INTEL_82860_HB	0x2531
+#define PCI_DEVICE_ID_INTEL_82845G_HB	0x2560
+#define PCI_DEVICE_ID_INTEL_82845G_IG	0x2562
+#define PCI_DEVICE_ID_INTEL_82865_HB	0x2570
+#define PCI_DEVICE_ID_INTEL_82865_IG	0x2572
+#define PCI_DEVICE_ID_INTEL_82875_HB	0x2578
+#define PCI_DEVICE_ID_INTEL_82875_IG	0x257b
+#define PCI_DEVICE_ID_INTEL_82915G_HB	0x2580
+#define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
+#define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
+#define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
+#define PCI_DEVICE_ID_INTEL_ICH6_0	0x2640
+#define PCI_DEVICE_ID_INTEL_ICH6_1	0x2641
+#define PCI_DEVICE_ID_INTEL_ICH6_2	0x2642
+#define PCI_DEVICE_ID_INTEL_ICH6_3	0x2651
+#define PCI_DEVICE_ID_INTEL_ICH6_4	0x2652
+#define PCI_DEVICE_ID_INTEL_ICH6_5	0x2653
+#define PCI_DEVICE_ID_INTEL_ICH6_6	0x2658
+#define PCI_DEVICE_ID_INTEL_ICH6_7	0x2659
+#define PCI_DEVICE_ID_INTEL_ICH6_8	0x265a
+#define PCI_DEVICE_ID_INTEL_ICH6_9	0x265b
+#define PCI_DEVICE_ID_INTEL_ICH6_10	0x265c
+#define PCI_DEVICE_ID_INTEL_ICH6_11	0x2660
+#define PCI_DEVICE_ID_INTEL_ICH6_12	0x2662
+#define PCI_DEVICE_ID_INTEL_ICH6_13	0x2664
+#define PCI_DEVICE_ID_INTEL_ICH6_14	0x2666
+#define PCI_DEVICE_ID_INTEL_ICH6_15	0x2668
+#define PCI_DEVICE_ID_INTEL_ICH6_16	0x266a
+#define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
+#define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
+#define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
+#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
+#define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
+#define PCI_DEVICE_ID_INTEL_ICH7_2	0x27c0
+#define PCI_DEVICE_ID_INTEL_ICH7_3	0x27c1
+#define PCI_DEVICE_ID_INTEL_ICH7_5	0x27c4
+#define PCI_DEVICE_ID_INTEL_ICH7_6	0x27c5
+#define PCI_DEVICE_ID_INTEL_ICH7_7	0x27c8
+#define PCI_DEVICE_ID_INTEL_ICH7_8	0x27c9
+#define PCI_DEVICE_ID_INTEL_ICH7_9	0x27ca
+#define PCI_DEVICE_ID_INTEL_ICH7_10	0x27cb
+#define PCI_DEVICE_ID_INTEL_ICH7_11	0x27cc
+#define PCI_DEVICE_ID_INTEL_ICH7_12	0x27d0
+#define PCI_DEVICE_ID_INTEL_ICH7_13	0x27d2
+#define PCI_DEVICE_ID_INTEL_ICH7_14	0x27d4
+#define PCI_DEVICE_ID_INTEL_ICH7_15	0x27d6
+#define PCI_DEVICE_ID_INTEL_ICH7_16	0x27d8
+#define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
+#define PCI_DEVICE_ID_INTEL_ICH7_18	0x27dc
+#define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
+#define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
+#define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
+#define PCI_DEVICE_ID_INTEL_ICH7_22	0x27e0
+#define PCI_DEVICE_ID_INTEL_ICH7_23	0x27e2
+#define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
+#define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
+#define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
+#define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
+#define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
+#define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
+#define PCI_DEVICE_ID_INTEL_E7320_MCH	0x3592
+#define PCI_DEVICE_ID_INTEL_MCH_PA	0x3595
+#define PCI_DEVICE_ID_INTEL_MCH_PA1	0x3596
+#define PCI_DEVICE_ID_INTEL_MCH_PB	0x3597
+#define PCI_DEVICE_ID_INTEL_MCH_PB1	0x3598
+#define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
+#define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
+#define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
+#define PCI_DEVICE_ID_INTEL_80310	0x530d
+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
+#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
+#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
+#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
+#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
+#define PCI_DEVICE_ID_INTEL_82810E_MC	0x7124
+#define PCI_DEVICE_ID_INTEL_82810E_IG	0x7125
+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
+#define PCI_DEVICE_ID_INTEL_440MX	0x7195
+#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
+#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
+#define PCI_DEVICE_ID_INTEL_82443MX_2	0x719a
+#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
+#define PCI_DEVICE_ID_INTEL_82443GX_0	0x71a0
+#define PCI_DEVICE_ID_INTEL_82443GX_1	0x71a1
+#define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
+#define PCI_DEVICE_ID_INTEL_82372FB_0	0x7600
+#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
+#define PCI_DEVICE_ID_INTEL_82372FB_2	0x7602
+#define PCI_DEVICE_ID_INTEL_82372FB_3	0x7603
+#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
+#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
+#define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
+#define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
+#define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
+#define PCI_DEVICE_ID_INTEL_IXP2400	0x9001
+#define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
+#define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
+
+#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
+#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
+#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
+#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
+
+#define PCI_VENDOR_ID_KTI		0x8e2e
+#define PCI_DEVICE_ID_KTI_ET32P2	0x3000
+
+#define PCI_VENDOR_ID_ADAPTEC		0x9004
+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
+#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
+#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
+#define PCI_DEVICE_ID_ADAPTEC_5800	0x5800
+#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
+#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
+#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
+#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
+#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
+#define PCI_DEVICE_ID_ADAPTEC_1030	0x8b78
+
+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
+#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
+#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
+#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
+#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
+#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
+#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
+#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
+#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
+#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
+#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP	0x0503
+
+#define PCI_VENDOR_ID_ATRONICS		0x907f
+#define PCI_DEVICE_ID_ATRONICS_2015	0x2015
+
+#define PCI_VENDOR_ID_HOLTEK		0x9412
+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
+
+#define PCI_VENDOR_ID_NETMOS		0x9710
+#define PCI_DEVICE_ID_NETMOS_9705	0x9705
+#define PCI_DEVICE_ID_NETMOS_9715	0x9715
+#define PCI_DEVICE_ID_NETMOS_9735	0x9735
+#define PCI_DEVICE_ID_NETMOS_9745	0x9745
+#define PCI_DEVICE_ID_NETMOS_9755	0x9755
+#define PCI_DEVICE_ID_NETMOS_9805	0x9805
+#define PCI_DEVICE_ID_NETMOS_9815	0x9815
+#define PCI_DEVICE_ID_NETMOS_9835	0x9835
+#define PCI_DEVICE_ID_NETMOS_9845	0x9845
+#define PCI_DEVICE_ID_NETMOS_9855	0x9855
+
+#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
+#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
+
+#define PCI_VENDOR_ID_TIGERJET		0xe159
+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
+
+#define PCI_VENDOR_ID_TTTECH		0x0357
+#define PCI_DEVICE_ID_TTTECH_MC322	0x000A
+
+#define PCI_VENDOR_ID_ARK		0xedd8
+#define PCI_DEVICE_ID_ARK_STING		0xa091
+#define PCI_DEVICE_ID_ARK_STINGARK	0xa099
+#define PCI_DEVICE_ID_ARK_2000MT	0xa0a1
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
new file mode 100644
index 000000000000..cd3eafc2c233
--- /dev/null
+++ b/include/linux/pcieport_if.h
@@ -0,0 +1,74 @@
+/*
+ * File:	pcieport_if.h
+ * Purpose:	PCI Express Port Bus Driver's IF Data Structure
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PCIEPORT_IF_H_
+#define _PCIEPORT_IF_H_
+
+/* Port Type */
+#define PCIE_RC_PORT			4	/* Root port of RC */
+#define PCIE_SW_UPSTREAM_PORT		5	/* Upstream port of Switch */
+#define PCIE_SW_DOWNSTREAM_PORT		6	/* Downstream port of Switch */
+#define PCIE_ANY_PORT			7
+
+/* Service Type */
+#define PCIE_PORT_SERVICE_PME		1	/* Power Management Event */
+#define PCIE_PORT_SERVICE_AER		2	/* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_HP		4	/* Native Hotplug */
+#define PCIE_PORT_SERVICE_VC		8	/* Virtual Channel */
+
+/* Root/Upstream/Downstream Port's Interrupt Mode */
+#define PCIE_PORT_INTx_MODE		0
+#define PCIE_PORT_MSI_MODE		1
+#define PCIE_PORT_MSIX_MODE		2
+
+struct pcie_port_service_id {
+	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
+	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
+	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
+	__u32 port_type, service_type;	/* Port Entity */
+	kernel_ulong_t driver_data;
+};
+
+struct pcie_device {
+	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
+	int 		interrupt_mode;	/* [0:INTx | 1:MSI | 2:MSI-X] */	
+	struct pcie_port_service_id id;	/* Service ID */
+	struct pci_dev	*port;	    /* Root/Upstream/Downstream Port */
+	void		*priv_data; /* Service Private Data */
+	struct device	device;     /* Generic Device Interface */
+};
+#define to_pcie_device(d) container_of(d, struct pcie_device, device)
+
+static inline void set_service_data(struct pcie_device *dev, void *data)
+{
+	dev->priv_data = data;
+}
+
+static inline void* get_service_data(struct pcie_device *dev)
+{
+	return dev->priv_data;
+}
+
+struct pcie_port_service_driver {
+	const char *name;
+	int (*probe) (struct pcie_device *dev, 
+		const struct pcie_port_service_id *id);
+	void (*remove) (struct pcie_device *dev);
+	int (*suspend) (struct pcie_device *dev, u32 state);
+	int (*resume) (struct pcie_device *dev);
+
+	const struct pcie_port_service_id *id_table;
+	struct device_driver driver;
+};
+#define to_service_driver(d) \
+	container_of(d, struct pcie_port_service_driver, driver)
+
+extern int pcie_port_service_register(struct pcie_port_service_driver *new);
+extern void pcie_port_service_unregister(struct pcie_port_service_driver *new);
+
+#endif /* _PCIEPORT_IF_H_ */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
new file mode 100644
index 000000000000..5451eb1e781d
--- /dev/null
+++ b/include/linux/percpu.h
@@ -0,0 +1,61 @@
+#ifndef __LINUX_PERCPU_H
+#define __LINUX_PERCPU_H
+#include <linux/spinlock.h> /* For preempt_disable() */
+#include <linux/slab.h> /* For kmalloc() */
+#include <linux/smp.h>
+#include <linux/string.h> /* For memset() */
+#include <asm/percpu.h>
+
+/* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
+#ifndef PERCPU_ENOUGH_ROOM
+#define PERCPU_ENOUGH_ROOM 32768
+#endif
+
+/* Must be an lvalue. */
+#define get_cpu_var(var) (*({ preempt_disable(); &__get_cpu_var(var); }))
+#define put_cpu_var(var) preempt_enable()
+
+#ifdef CONFIG_SMP
+
+struct percpu_data {
+	void *ptrs[NR_CPUS];
+	void *blkp;
+};
+
+/* 
+ * Use this to get to a cpu's version of the per-cpu object allocated using
+ * alloc_percpu.  Non-atomic access to the current CPU's version should
+ * probably be combined with get_cpu()/put_cpu().
+ */ 
+#define per_cpu_ptr(ptr, cpu)                   \
+({                                              \
+        struct percpu_data *__p = (struct percpu_data *)~(unsigned long)(ptr); \
+        (__typeof__(ptr))__p->ptrs[(cpu)];	\
+})
+
+extern void *__alloc_percpu(size_t size, size_t align);
+extern void free_percpu(const void *);
+
+#else /* CONFIG_SMP */
+
+#define per_cpu_ptr(ptr, cpu) (ptr)
+
+static inline void *__alloc_percpu(size_t size, size_t align)
+{
+	void *ret = kmalloc(size, GFP_KERNEL);
+	if (ret)
+		memset(ret, 0, size);
+	return ret;
+}
+static inline void free_percpu(const void *ptr)
+{	
+	kfree(ptr);
+}
+
+#endif /* CONFIG_SMP */
+
+/* Simple wrapper for the common case: zeros memory. */
+#define alloc_percpu(type) \
+	((type *)(__alloc_percpu(sizeof(type), __alignof__(type))))
+
+#endif /* __LINUX_PERCPU_H */
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
new file mode 100644
index 000000000000..bd6708e2c027
--- /dev/null
+++ b/include/linux/percpu_counter.h
@@ -0,0 +1,107 @@
+#ifndef _LINUX_PERCPU_COUNTER_H
+#define _LINUX_PERCPU_COUNTER_H
+/*
+ * A simple "approximate counter" for use in ext2 and ext3 superblocks.
+ *
+ * WARNING: these things are HUGE.  4 kbytes per counter on 32-way P4.
+ */
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/percpu.h>
+
+#ifdef CONFIG_SMP
+
+struct percpu_counter {
+	spinlock_t lock;
+	long count;
+	long *counters;
+};
+
+#if NR_CPUS >= 16
+#define FBC_BATCH	(NR_CPUS*2)
+#else
+#define FBC_BATCH	(NR_CPUS*4)
+#endif
+
+static inline void percpu_counter_init(struct percpu_counter *fbc)
+{
+	spin_lock_init(&fbc->lock);
+	fbc->count = 0;
+	fbc->counters = alloc_percpu(long);
+}
+
+static inline void percpu_counter_destroy(struct percpu_counter *fbc)
+{
+	free_percpu(fbc->counters);
+}
+
+void percpu_counter_mod(struct percpu_counter *fbc, long amount);
+
+static inline long percpu_counter_read(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+/*
+ * It is possible for the percpu_counter_read() to return a small negative
+ * number for some counter which should never be negative.
+ */
+static inline long percpu_counter_read_positive(struct percpu_counter *fbc)
+{
+	long ret = fbc->count;
+
+	barrier();		/* Prevent reloads of fbc->count */
+	if (ret > 0)
+		return ret;
+	return 1;
+}
+
+#else
+
+struct percpu_counter {
+	long count;
+};
+
+static inline void percpu_counter_init(struct percpu_counter *fbc)
+{
+	fbc->count = 0;
+}
+
+static inline void percpu_counter_destroy(struct percpu_counter *fbc)
+{
+}
+
+static inline void
+percpu_counter_mod(struct percpu_counter *fbc, long amount)
+{
+	preempt_disable();
+	fbc->count += amount;
+	preempt_enable();
+}
+
+static inline long percpu_counter_read(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+static inline long percpu_counter_read_positive(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+#endif	/* CONFIG_SMP */
+
+static inline void percpu_counter_inc(struct percpu_counter *fbc)
+{
+	percpu_counter_mod(fbc, 1);
+}
+
+static inline void percpu_counter_dec(struct percpu_counter *fbc)
+{
+	percpu_counter_mod(fbc, -1);
+}
+
+#endif /* _LINUX_PERCPU_COUNTER_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
new file mode 100644
index 000000000000..80d780e5a8f5
--- /dev/null
+++ b/include/linux/personality.h
@@ -0,0 +1,114 @@
+#ifndef _LINUX_PERSONALITY_H
+#define _LINUX_PERSONALITY_H
+
+/*
+ * Handling of different ABIs (personalities).
+ */
+
+struct exec_domain;
+struct pt_regs;
+
+extern int		register_exec_domain(struct exec_domain *);
+extern int		unregister_exec_domain(struct exec_domain *);
+extern int		__set_personality(unsigned long);
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
+	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
+						 * (signal handling)
+						 */
+	MMAP_PAGE_ZERO =	0x0100000,
+	ADDR_COMPAT_LAYOUT =	0x0200000,
+	READ_IMPLIES_EXEC =	0x0400000,
+	ADDR_LIMIT_32BIT =	0x0800000,
+	SHORT_INODE =		0x1000000,
+	WHOLE_SECONDS =		0x2000000,
+	STICKY_TIMEOUTS	=	0x4000000,
+	ADDR_LIMIT_3GB = 	0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte.  Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+	PER_LINUX =		0x0000,
+	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
+	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
+	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
+					 WHOLE_SECONDS | SHORT_INODE,
+	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
+	PER_BSD =		0x0006,
+	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
+	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_LINUX32 =		0x0008,
+	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
+	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+	PER_RISCOS =		0x000c,
+	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
+	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
+	PER_HPUX =		0x0010,
+	PER_MASK =		0x00ff,
+};
+
+
+/*
+ * Description of an execution domain.
+ * 
+ * The first two members are refernced from assembly source
+ * and should stay where they are unless explicitly needed.
+ */
+typedef void (*handler_t)(int, struct pt_regs *);
+
+struct exec_domain {
+	const char		*name;		/* name of the execdomain */
+	handler_t		handler;	/* handler for syscalls */
+	unsigned char		pers_low;	/* lowest personality */
+	unsigned char		pers_high;	/* highest personality */
+	unsigned long		*signal_map;	/* signal mapping */
+	unsigned long		*signal_invmap;	/* reverse signal mapping */
+	struct map_segment	*err_map;	/* error mapping */
+	struct map_segment	*socktype_map;	/* socket type mapping */
+	struct map_segment	*sockopt_map;	/* socket option mapping */
+	struct map_segment	*af_map;	/* address family mapping */
+	struct module		*module;	/* module context of the ed. */
+	struct exec_domain	*next;		/* linked list (internal) */
+};
+
+/*
+ * Return the base personality without flags.
+ */
+#define personality(pers)	(pers & PER_MASK)
+
+/*
+ * Personality of the currently running process.
+ */
+#define get_personality		(current->personality)
+
+/*
+ * Change personality of the currently running process.
+ */
+#define set_personality(pers) \
+	((current->personality == pers) ? 0 : __set_personality(pers))
+
+#endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
new file mode 100644
index 000000000000..e6b519220245
--- /dev/null
+++ b/include/linux/pfkeyv2.h
@@ -0,0 +1,336 @@
+/* PF_KEY user interface, this is defined by rfc2367 so
+ * do not make arbitrary modifications or else this header
+ * file will not be compliant.
+ */
+
+#ifndef _LINUX_PFKEY2_H
+#define _LINUX_PFKEY2_H
+
+#include <linux/types.h>
+
+#define PF_KEY_V2		2
+#define PFKEYV2_REVISION	199806L
+
+struct sadb_msg {
+	uint8_t		sadb_msg_version;
+	uint8_t		sadb_msg_type;
+	uint8_t		sadb_msg_errno;
+	uint8_t		sadb_msg_satype;
+	uint16_t	sadb_msg_len;
+	uint16_t	sadb_msg_reserved;
+	uint32_t	sadb_msg_seq;
+	uint32_t	sadb_msg_pid;
+} __attribute__((packed));
+/* sizeof(struct sadb_msg) == 16 */
+
+struct sadb_ext {
+	uint16_t	sadb_ext_len;
+	uint16_t	sadb_ext_type;
+} __attribute__((packed));
+/* sizeof(struct sadb_ext) == 4 */
+
+struct sadb_sa {
+	uint16_t	sadb_sa_len;
+	uint16_t	sadb_sa_exttype;
+	uint32_t	sadb_sa_spi;
+	uint8_t		sadb_sa_replay;
+	uint8_t		sadb_sa_state;
+	uint8_t		sadb_sa_auth;
+	uint8_t		sadb_sa_encrypt;
+	uint32_t	sadb_sa_flags;
+} __attribute__((packed));
+/* sizeof(struct sadb_sa) == 16 */
+
+struct sadb_lifetime {
+	uint16_t	sadb_lifetime_len;
+	uint16_t	sadb_lifetime_exttype;
+	uint32_t	sadb_lifetime_allocations;
+	uint64_t	sadb_lifetime_bytes;
+	uint64_t	sadb_lifetime_addtime;
+	uint64_t	sadb_lifetime_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_lifetime) == 32 */
+
+struct sadb_address {
+	uint16_t	sadb_address_len;
+	uint16_t	sadb_address_exttype;
+	uint8_t		sadb_address_proto;
+	uint8_t		sadb_address_prefixlen;
+	uint16_t	sadb_address_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_address) == 8 */
+
+struct sadb_key {
+	uint16_t	sadb_key_len;
+	uint16_t	sadb_key_exttype;
+	uint16_t	sadb_key_bits;
+	uint16_t	sadb_key_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_key) == 8 */
+
+struct sadb_ident {
+	uint16_t	sadb_ident_len;
+	uint16_t	sadb_ident_exttype;
+	uint16_t	sadb_ident_type;
+	uint16_t	sadb_ident_reserved;
+	uint64_t	sadb_ident_id;
+} __attribute__((packed));
+/* sizeof(struct sadb_ident) == 16 */
+
+struct sadb_sens {
+	uint16_t	sadb_sens_len;
+	uint16_t	sadb_sens_exttype;
+	uint32_t	sadb_sens_dpd;
+	uint8_t		sadb_sens_sens_level;
+	uint8_t		sadb_sens_sens_len;
+	uint8_t		sadb_sens_integ_level;
+	uint8_t		sadb_sens_integ_len;
+	uint32_t	sadb_sens_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_sens) == 16 */
+
+/* followed by:
+	uint64_t	sadb_sens_bitmap[sens_len];
+	uint64_t	sadb_integ_bitmap[integ_len];  */
+
+struct sadb_prop {
+	uint16_t	sadb_prop_len;
+	uint16_t	sadb_prop_exttype;
+	uint8_t		sadb_prop_replay;
+	uint8_t		sadb_prop_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_prop) == 8 */
+
+/* followed by:
+	struct sadb_comb sadb_combs[(sadb_prop_len +
+		sizeof(uint64_t) - sizeof(struct sadb_prop)) /
+		sizeof(strut sadb_comb)]; */
+
+struct sadb_comb {
+	uint8_t		sadb_comb_auth;
+	uint8_t		sadb_comb_encrypt;
+	uint16_t	sadb_comb_flags;
+	uint16_t	sadb_comb_auth_minbits;
+	uint16_t	sadb_comb_auth_maxbits;
+	uint16_t	sadb_comb_encrypt_minbits;
+	uint16_t	sadb_comb_encrypt_maxbits;
+	uint32_t	sadb_comb_reserved;
+	uint32_t	sadb_comb_soft_allocations;
+	uint32_t	sadb_comb_hard_allocations;
+	uint64_t	sadb_comb_soft_bytes;
+	uint64_t	sadb_comb_hard_bytes;
+	uint64_t	sadb_comb_soft_addtime;
+	uint64_t	sadb_comb_hard_addtime;
+	uint64_t	sadb_comb_soft_usetime;
+	uint64_t	sadb_comb_hard_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_comb) == 72 */
+
+struct sadb_supported {
+	uint16_t	sadb_supported_len;
+	uint16_t	sadb_supported_exttype;
+	uint32_t	sadb_supported_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_supported) == 8 */
+
+/* followed by:
+	struct sadb_alg sadb_algs[(sadb_supported_len +
+		sizeof(uint64_t) - sizeof(struct sadb_supported)) /
+		sizeof(struct sadb_alg)]; */
+
+struct sadb_alg {
+	uint8_t		sadb_alg_id;
+	uint8_t		sadb_alg_ivlen;
+	uint16_t	sadb_alg_minbits;
+	uint16_t	sadb_alg_maxbits;
+	uint16_t	sadb_alg_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_alg) == 8 */
+
+struct sadb_spirange {
+	uint16_t	sadb_spirange_len;
+	uint16_t	sadb_spirange_exttype;
+	uint32_t	sadb_spirange_min;
+	uint32_t	sadb_spirange_max;
+	uint32_t	sadb_spirange_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_spirange) == 16 */
+
+struct sadb_x_kmprivate {
+	uint16_t	sadb_x_kmprivate_len;
+	uint16_t	sadb_x_kmprivate_exttype;
+	u_int32_t	sadb_x_kmprivate_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_kmprivate) == 8 */
+
+struct sadb_x_sa2 {
+	uint16_t	sadb_x_sa2_len;
+	uint16_t	sadb_x_sa2_exttype;
+	uint8_t		sadb_x_sa2_mode;
+	uint8_t		sadb_x_sa2_reserved1;
+	uint16_t	sadb_x_sa2_reserved2;
+	uint32_t	sadb_x_sa2_sequence;
+	uint32_t	sadb_x_sa2_reqid;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_sa2) == 16 */
+
+struct sadb_x_policy {
+	uint16_t	sadb_x_policy_len;
+	uint16_t	sadb_x_policy_exttype;
+	uint16_t	sadb_x_policy_type;
+	uint8_t		sadb_x_policy_dir;
+	uint8_t		sadb_x_policy_reserved;
+	uint32_t	sadb_x_policy_id;
+	uint32_t	sadb_x_policy_priority;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_policy) == 16 */
+
+struct sadb_x_ipsecrequest {
+	uint16_t	sadb_x_ipsecrequest_len;
+	uint16_t	sadb_x_ipsecrequest_proto;
+	uint8_t		sadb_x_ipsecrequest_mode;
+	uint8_t		sadb_x_ipsecrequest_level;
+	uint16_t	sadb_x_ipsecrequest_reserved1;
+	uint32_t	sadb_x_ipsecrequest_reqid;
+	uint32_t	sadb_x_ipsecrequest_reserved2;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_ipsecrequest) == 16 */
+
+/* This defines the TYPE of Nat Traversal in use.  Currently only one
+ * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
+ */
+struct sadb_x_nat_t_type {
+	uint16_t	sadb_x_nat_t_type_len;
+	uint16_t	sadb_x_nat_t_type_exttype;
+	uint8_t		sadb_x_nat_t_type_type;
+	uint8_t		sadb_x_nat_t_type_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_type) == 8 */
+
+/* Pass a NAT Traversal port (Source or Dest port) */
+struct sadb_x_nat_t_port {
+	uint16_t	sadb_x_nat_t_port_len;
+	uint16_t	sadb_x_nat_t_port_exttype;
+	uint16_t	sadb_x_nat_t_port_port;
+	uint16_t	sadb_x_nat_t_port_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_port) == 8 */
+
+/* Message types */
+#define SADB_RESERVED		0
+#define SADB_GETSPI		1
+#define SADB_UPDATE		2
+#define SADB_ADD		3
+#define SADB_DELETE		4
+#define SADB_GET		5
+#define SADB_ACQUIRE		6
+#define SADB_REGISTER		7
+#define SADB_EXPIRE		8
+#define SADB_FLUSH		9
+#define SADB_DUMP		10
+#define SADB_X_PROMISC		11
+#define SADB_X_PCHANGE		12
+#define SADB_X_SPDUPDATE	13
+#define SADB_X_SPDADD		14
+#define SADB_X_SPDDELETE	15
+#define SADB_X_SPDGET		16
+#define SADB_X_SPDACQUIRE	17
+#define SADB_X_SPDDUMP		18
+#define SADB_X_SPDFLUSH		19
+#define SADB_X_SPDSETIDX	20
+#define SADB_X_SPDEXPIRE	21
+#define SADB_X_SPDDELETE2	22
+#define SADB_X_NAT_T_NEW_MAPPING	23
+#define SADB_MAX		23
+
+/* Security Association flags */
+#define SADB_SAFLAGS_PFS	1
+#define SADB_SAFLAGS_DECAP_DSCP	0x40000000
+#define SADB_SAFLAGS_NOECN	0x80000000
+
+/* Security Association states */
+#define SADB_SASTATE_LARVAL	0
+#define SADB_SASTATE_MATURE	1
+#define SADB_SASTATE_DYING	2
+#define SADB_SASTATE_DEAD	3
+#define SADB_SASTATE_MAX	3
+
+/* Security Association types */
+#define SADB_SATYPE_UNSPEC	0
+#define SADB_SATYPE_AH		2
+#define SADB_SATYPE_ESP		3
+#define SADB_SATYPE_RSVP	5
+#define SADB_SATYPE_OSPFV2	6
+#define SADB_SATYPE_RIPV2	7
+#define SADB_SATYPE_MIP		8
+#define SADB_X_SATYPE_IPCOMP	9
+#define SADB_SATYPE_MAX		9
+
+/* Authentication algorithms */
+#define SADB_AALG_NONE			0
+#define SADB_AALG_MD5HMAC		2
+#define SADB_AALG_SHA1HMAC		3
+#define SADB_X_AALG_SHA2_256HMAC	5
+#define SADB_X_AALG_SHA2_384HMAC	6
+#define SADB_X_AALG_SHA2_512HMAC	7
+#define SADB_X_AALG_RIPEMD160HMAC	8
+#define SADB_X_AALG_NULL		251	/* kame */
+#define SADB_AALG_MAX			251
+
+/* Encryption algorithms */
+#define SADB_EALG_NONE			0
+#define SADB_EALG_DESCBC		2
+#define SADB_EALG_3DESCBC		3
+#define SADB_X_EALG_CASTCBC		6
+#define SADB_X_EALG_BLOWFISHCBC		7
+#define SADB_EALG_NULL			11
+#define SADB_X_EALG_AESCBC		12
+#define SADB_EALG_MAX                   253 /* last EALG */
+/* private allocations should use 249-255 (RFC2407) */
+#define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+#define SADB_X_EALG_TWOFISHCBC  253     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+
+/* Compression algorithms */
+#define SADB_X_CALG_NONE		0
+#define SADB_X_CALG_OUI			1
+#define SADB_X_CALG_DEFLATE		2
+#define SADB_X_CALG_LZS			3
+#define SADB_X_CALG_LZJH		4
+#define SADB_X_CALG_MAX			4
+
+/* Extension Header values */
+#define SADB_EXT_RESERVED		0
+#define SADB_EXT_SA			1
+#define SADB_EXT_LIFETIME_CURRENT	2
+#define SADB_EXT_LIFETIME_HARD		3
+#define SADB_EXT_LIFETIME_SOFT		4
+#define SADB_EXT_ADDRESS_SRC		5
+#define SADB_EXT_ADDRESS_DST		6
+#define SADB_EXT_ADDRESS_PROXY		7
+#define SADB_EXT_KEY_AUTH		8
+#define SADB_EXT_KEY_ENCRYPT		9
+#define SADB_EXT_IDENTITY_SRC		10
+#define SADB_EXT_IDENTITY_DST		11
+#define SADB_EXT_SENSITIVITY		12
+#define SADB_EXT_PROPOSAL		13
+#define SADB_EXT_SUPPORTED_AUTH		14
+#define SADB_EXT_SUPPORTED_ENCRYPT	15
+#define SADB_EXT_SPIRANGE		16
+#define SADB_X_EXT_KMPRIVATE		17
+#define SADB_X_EXT_POLICY		18
+#define SADB_X_EXT_SA2			19
+/* The next four entries are for setting up NAT Traversal */
+#define SADB_X_EXT_NAT_T_TYPE		20
+#define SADB_X_EXT_NAT_T_SPORT		21
+#define SADB_X_EXT_NAT_T_DPORT		22
+#define SADB_X_EXT_NAT_T_OA		23
+#define SADB_EXT_MAX			23
+
+/* Identity Extension values */
+#define SADB_IDENTTYPE_RESERVED	0
+#define SADB_IDENTTYPE_PREFIX	1
+#define SADB_IDENTTYPE_FQDN	2
+#define SADB_IDENTTYPE_USERFQDN	3
+#define SADB_IDENTTYPE_MAX	3
+
+#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/include/linux/pg.h b/include/linux/pg.h
new file mode 100644
index 000000000000..db994bb0c794
--- /dev/null
+++ b/include/linux/pg.h
@@ -0,0 +1,63 @@
+/* 	pg.h (c) 1998  Grant R. Guenther <grant@torque.net>
+ 		       Under the terms of the GNU General Public License
+
+
+	pg.h defines the user interface to the generic ATAPI packet
+        command driver for parallel port ATAPI devices (pg). The
+	driver is loosely modelled after the generic SCSI driver, sg,
+	although the actual interface is different.
+
+	The pg driver provides a simple character device interface for
+        sending ATAPI commands to a device.  With the exception of the
+	ATAPI reset operation, all operations are performed by a pair
+        of read and write operations to the appropriate /dev/pgN device.
+	A write operation delivers a command and any outbound data in
+        a single buffer.  Normally, the write will succeed unless the
+        device is offline or malfunctioning, or there is already another
+	command pending.  If the write succeeds, it should be followed
+        immediately by a read operation, to obtain any returned data and
+        status information.  A read will fail if there is no operation
+        in progress.
+
+	As a special case, the device can be reset with a write operation,
+        and in this case, no following read is expected, or permitted.
+
+	There are no ioctl() operations.  Any single operation
+	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
+        copy the data through an internal buffer.  In keeping with all
+	current ATAPI devices, command packets are assumed to be exactly
+	12 bytes in length.
+
+	To permit future changes to this interface, the headers in the
+	read and write buffers contain a single character "magic" flag.
+        Currently this flag must be the character "P".
+
+*/
+
+#define PG_MAGIC	'P'
+#define PG_RESET	'Z'
+#define PG_COMMAND	'C'
+
+#define PG_MAX_DATA	32768
+
+struct pg_write_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	func;		/* PG_RESET or PG_COMMAND */
+	int     dlen;		/* number of bytes expected to transfer */
+	int     timeout;	/* number of seconds before timeout */
+	char	packet[12];	/* packet command */
+
+};
+
+struct pg_read_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	scsi;		/* "scsi" status == sense key */
+	int	dlen;		/* size of device transfer request */
+	int     duration;	/* time in seconds command took */
+	char    pad[12];	/* not used */
+
+};
+
+/* end of pg.h */
diff --git a/include/linux/phonedev.h b/include/linux/phonedev.h
new file mode 100644
index 000000000000..d54049eed0c3
--- /dev/null
+++ b/include/linux/phonedev.h
@@ -0,0 +1,26 @@
+#ifndef __LINUX_PHONEDEV_H
+#define __LINUX_PHONEDEV_H
+
+#include <linux/types.h>
+#include <linux/version.h>
+
+#ifdef __KERNEL__
+
+#include <linux/poll.h>
+
+struct phone_device {
+	struct phone_device *next;
+	struct file_operations *f_op;
+	int (*open) (struct phone_device *, struct file *);
+	int board;		/* Device private index */
+	int minor;
+};
+
+extern int phonedev_init(void);
+#define PHONE_MAJOR	100
+extern int phone_register_device(struct phone_device *, int unit);
+#define PHONE_UNIT_ANY	-1
+extern void phone_unregister_device(struct phone_device *);
+
+#endif
+#endif
diff --git a/include/linux/pid.h b/include/linux/pid.h
new file mode 100644
index 000000000000..5b2fcb19d2da
--- /dev/null
+++ b/include/linux/pid.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_PID_H
+#define _LINUX_PID_H
+
+enum pid_type
+{
+	PIDTYPE_PID,
+	PIDTYPE_TGID,
+	PIDTYPE_PGID,
+	PIDTYPE_SID,
+	PIDTYPE_MAX
+};
+
+struct pid
+{
+	/* Try to keep pid_chain in the same cacheline as nr for find_pid */
+	int nr;
+	struct hlist_node pid_chain;
+	/* list of pids with the same nr, only one of them is in the hash */
+	struct list_head pid_list;
+};
+
+#define pid_task(elem, type) \
+	list_entry(elem, struct task_struct, pids[type].pid_list)
+
+/*
+ * attach_pid() and detach_pid() must be called with the tasklist_lock
+ * write-held.
+ */
+extern int FASTCALL(attach_pid(struct task_struct *task, enum pid_type type, int nr));
+
+extern void FASTCALL(detach_pid(struct task_struct *task, enum pid_type));
+
+/*
+ * look up a PID in the hash table. Must be called with the tasklist_lock
+ * held.
+ */
+extern struct pid *FASTCALL(find_pid(enum pid_type, int));
+
+extern int alloc_pidmap(void);
+extern void FASTCALL(free_pidmap(int));
+extern void switch_exec_pids(struct task_struct *leader, struct task_struct *thread);
+
+#define do_each_task_pid(who, type, task)				\
+	if ((task = find_task_by_pid_type(type, who))) {		\
+		prefetch((task)->pids[type].pid_list.next);		\
+		do {
+
+#define while_each_task_pid(who, type, task)				\
+		} while (task = pid_task((task)->pids[type].pid_list.next,\
+						type),			\
+			prefetch((task)->pids[type].pid_list.next),	\
+			hlist_unhashed(&(task)->pids[type].pid_chain));	\
+	}								\
+
+#endif /* _LINUX_PID_H */
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
new file mode 100644
index 000000000000..36725e7c02c6
--- /dev/null
+++ b/include/linux/pipe_fs_i.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_PIPE_FS_I_H
+#define _LINUX_PIPE_FS_I_H
+
+#define PIPEFS_MAGIC 0x50495045
+
+#define PIPE_BUFFERS (16)
+
+struct pipe_buffer {
+	struct page *page;
+	unsigned int offset, len;
+	struct pipe_buf_operations *ops;
+};
+
+struct pipe_buf_operations {
+	int can_merge;
+	void * (*map)(struct file *, struct pipe_inode_info *, struct pipe_buffer *);
+	void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *);
+	void (*release)(struct pipe_inode_info *, struct pipe_buffer *);
+};
+
+struct pipe_inode_info {
+	wait_queue_head_t wait;
+	unsigned int nrbufs, curbuf;
+	struct pipe_buffer bufs[PIPE_BUFFERS];
+	struct page *tmp_page;
+	unsigned int start;
+	unsigned int readers;
+	unsigned int writers;
+	unsigned int waiting_writers;
+	unsigned int r_counter;
+	unsigned int w_counter;
+	struct fasync_struct *fasync_readers;
+	struct fasync_struct *fasync_writers;
+};
+
+/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
+   memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
+#define PIPE_SIZE		PAGE_SIZE
+
+#define PIPE_SEM(inode)		(&(inode).i_sem)
+#define PIPE_WAIT(inode)	(&(inode).i_pipe->wait)
+#define PIPE_BASE(inode)	((inode).i_pipe->base)
+#define PIPE_START(inode)	((inode).i_pipe->start)
+#define PIPE_LEN(inode)		((inode).i_pipe->len)
+#define PIPE_READERS(inode)	((inode).i_pipe->readers)
+#define PIPE_WRITERS(inode)	((inode).i_pipe->writers)
+#define PIPE_WAITING_WRITERS(inode)	((inode).i_pipe->waiting_writers)
+#define PIPE_RCOUNTER(inode)	((inode).i_pipe->r_counter)
+#define PIPE_WCOUNTER(inode)	((inode).i_pipe->w_counter)
+#define PIPE_FASYNC_READERS(inode)     (&((inode).i_pipe->fasync_readers))
+#define PIPE_FASYNC_WRITERS(inode)     (&((inode).i_pipe->fasync_writers))
+
+/* Drop the inode semaphore and wait for a pipe event, atomically */
+void pipe_wait(struct inode * inode);
+
+struct inode* pipe_new(struct inode* inode);
+void free_pipe_info(struct inode* inode);
+
+#endif
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
new file mode 100644
index 000000000000..d2aa214d6803
--- /dev/null
+++ b/include/linux/pkt_cls.h
@@ -0,0 +1,426 @@
+#ifndef __LINUX_PKT_CLS_H
+#define __LINUX_PKT_CLS_H
+
+#include <linux/pkt_sched.h>
+
+/* I think i could have done better macros ; for now this is stolen from
+ * some arch/mips code - jhs
+*/
+#define _TC_MAKE32(x) ((x))
+
+#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
+#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
+#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
+#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
+
+/* verdict bit breakdown 
+ *
+bit 0: when set -> this packet has been munged already
+
+bit 1: when set -> It is ok to munge this packet
+
+bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
+assume loop
+
+bit 6,7: Where this packet was last seen 
+0: Above the transmit example at the socket level
+1: on the Ingress
+2: on the Egress
+
+bit 8: when set --> Request not to classify on ingress. 
+
+bits 9,10,11: redirect counter -  redirect TTL. Loop avoidance
+
+ *
+ * */
+
+#define TC_MUNGED          _TC_MAKEMASK1(0)
+#define SET_TC_MUNGED(v)   ( TC_MUNGED | (v & ~TC_MUNGED))
+#define CLR_TC_MUNGED(v)   ( v & ~TC_MUNGED)
+
+#define TC_OK2MUNGE        _TC_MAKEMASK1(1)
+#define SET_TC_OK2MUNGE(v)   ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
+#define CLR_TC_OK2MUNGE(v)   ( v & ~TC_OK2MUNGE)
+
+#define S_TC_VERD          _TC_MAKE32(2)
+#define M_TC_VERD          _TC_MAKEMASK(4,S_TC_VERD)
+#define G_TC_VERD(x)       _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
+#define V_TC_VERD(x)       _TC_MAKEVALUE(x,S_TC_VERD)
+#define SET_TC_VERD(v,n)   ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
+
+#define S_TC_FROM          _TC_MAKE32(6)
+#define M_TC_FROM          _TC_MAKEMASK(2,S_TC_FROM)
+#define G_TC_FROM(x)       _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
+#define V_TC_FROM(x)       _TC_MAKEVALUE(x,S_TC_FROM)
+#define SET_TC_FROM(v,n)   ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
+#define AT_STACK	0x0
+#define AT_INGRESS	0x1
+#define AT_EGRESS	0x2
+
+#define TC_NCLS          _TC_MAKEMASK1(8)
+#define SET_TC_NCLS(v)   ( TC_NCLS | (v & ~TC_NCLS))
+#define CLR_TC_NCLS(v)   ( v & ~TC_NCLS)
+
+#define S_TC_RTTL          _TC_MAKE32(9)
+#define M_TC_RTTL          _TC_MAKEMASK(3,S_TC_RTTL)
+#define G_TC_RTTL(x)       _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
+#define V_TC_RTTL(x)       _TC_MAKEVALUE(x,S_TC_RTTL)
+#define SET_TC_RTTL(v,n)   ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
+
+#define S_TC_AT          _TC_MAKE32(12)
+#define M_TC_AT          _TC_MAKEMASK(2,S_TC_AT)
+#define G_TC_AT(x)       _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
+#define V_TC_AT(x)       _TC_MAKEVALUE(x,S_TC_AT)
+#define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
+
+/* Action attributes */
+enum
+{
+	TCA_ACT_UNSPEC,
+	TCA_ACT_KIND,
+	TCA_ACT_OPTIONS,
+	TCA_ACT_INDEX,
+	TCA_ACT_STATS,
+	__TCA_ACT_MAX
+};
+
+#define TCA_ACT_MAX __TCA_ACT_MAX
+#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
+#define TCA_ACT_MAX_PRIO 32
+#define TCA_ACT_BIND	1
+#define TCA_ACT_NOBIND	0
+#define TCA_ACT_UNBIND	1
+#define TCA_ACT_NOUNBIND	0
+#define TCA_ACT_REPLACE		1
+#define TCA_ACT_NOREPLACE	0
+#define MAX_REC_LOOP 4
+#define MAX_RED_LOOP 4
+
+#define TC_ACT_UNSPEC	(-1)
+#define TC_ACT_OK		0
+#define TC_ACT_RECLASSIFY	1
+#define TC_ACT_SHOT		2
+#define TC_ACT_PIPE		3
+#define TC_ACT_STOLEN		4
+#define TC_ACT_QUEUED		5
+#define TC_ACT_REPEAT		6
+#define TC_ACT_JUMP		0x10000000
+
+/* Action type identifiers*/
+enum
+{
+	TCA_ID_UNSPEC=0,
+	TCA_ID_POLICE=1,
+	/* other actions go here */
+	__TCA_ID_MAX=255
+};
+
+#define TCA_ID_MAX __TCA_ID_MAX
+
+struct tc_police
+{
+	__u32			index;
+	int			action;
+#define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
+#define TC_POLICE_OK		TC_ACT_OK
+#define TC_POLICE_RECLASSIFY	TC_ACT_RECLASSIFY
+#define TC_POLICE_SHOT		TC_ACT_SHOT
+#define TC_POLICE_PIPE		TC_ACT_PIPE
+
+	__u32			limit;
+	__u32			burst;
+	__u32			mtu;
+	struct tc_ratespec	rate;
+	struct tc_ratespec	peakrate;
+	int 			refcnt;
+	int 			bindcnt;
+	__u32			capab;
+};
+
+struct tcf_t
+{
+	__u64   install;
+	__u64   lastuse;
+	__u64   expires;
+};
+
+struct tc_cnt
+{
+	int                   refcnt; 
+	int                   bindcnt;
+};
+
+#define tc_gen \
+	__u32                 index; \
+	__u32                 capab; \
+	int                   action; \
+	int                   refcnt; \
+	int                   bindcnt
+
+enum
+{
+	TCA_POLICE_UNSPEC,
+	TCA_POLICE_TBF,
+	TCA_POLICE_RATE,
+	TCA_POLICE_PEAKRATE,
+	TCA_POLICE_AVRATE,
+	TCA_POLICE_RESULT,
+	__TCA_POLICE_MAX
+#define TCA_POLICE_RESULT TCA_POLICE_RESULT
+};
+
+#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
+
+/* U32 filters */
+
+#define TC_U32_HTID(h) ((h)&0xFFF00000)
+#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
+#define TC_U32_HASH(h) (((h)>>12)&0xFF)
+#define TC_U32_NODE(h) ((h)&0xFFF)
+#define TC_U32_KEY(h) ((h)&0xFFFFF)
+#define TC_U32_UNSPEC	0
+#define TC_U32_ROOT	(0xFFF00000)
+
+enum
+{
+	TCA_U32_UNSPEC,
+	TCA_U32_CLASSID,
+	TCA_U32_HASH,
+	TCA_U32_LINK,
+	TCA_U32_DIVISOR,
+	TCA_U32_SEL,
+	TCA_U32_POLICE,
+	TCA_U32_ACT,   
+	TCA_U32_INDEV,
+	TCA_U32_PCNT,
+	TCA_U32_MARK,
+	__TCA_U32_MAX
+};
+
+#define TCA_U32_MAX (__TCA_U32_MAX - 1)
+
+struct tc_u32_key
+{
+	__u32		mask;
+	__u32		val;
+	int		off;
+	int		offmask;
+};
+
+struct tc_u32_sel
+{
+	unsigned char		flags;
+	unsigned char		offshift;
+	unsigned char		nkeys;
+
+	__u16			offmask;
+	__u16			off;
+	short			offoff;
+
+	short			hoff;
+	__u32			hmask;
+	struct tc_u32_key	keys[0];
+};
+
+struct tc_u32_mark
+{
+	__u32		val;
+	__u32		mask;
+	__u32		success;
+};
+
+struct tc_u32_pcnt
+{
+	__u64 rcnt;
+	__u64 rhit;
+	__u64 kcnts[0];
+};
+
+/* Flags */
+
+#define TC_U32_TERMINAL		1
+#define TC_U32_OFFSET		2
+#define TC_U32_VAROFFSET	4
+#define TC_U32_EAT		8
+
+#define TC_U32_MAXDEPTH 8
+
+
+/* RSVP filter */
+
+enum
+{
+	TCA_RSVP_UNSPEC,
+	TCA_RSVP_CLASSID,
+	TCA_RSVP_DST,
+	TCA_RSVP_SRC,
+	TCA_RSVP_PINFO,
+	TCA_RSVP_POLICE,
+	TCA_RSVP_ACT,
+	__TCA_RSVP_MAX
+};
+
+#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
+
+struct tc_rsvp_gpi
+{
+	__u32	key;
+	__u32	mask;
+	int	offset;
+};
+
+struct tc_rsvp_pinfo
+{
+	struct tc_rsvp_gpi dpi;
+	struct tc_rsvp_gpi spi;
+	__u8	protocol;
+	__u8	tunnelid;
+	__u8	tunnelhdr;
+};
+
+/* ROUTE filter */
+
+enum
+{
+	TCA_ROUTE4_UNSPEC,
+	TCA_ROUTE4_CLASSID,
+	TCA_ROUTE4_TO,
+	TCA_ROUTE4_FROM,
+	TCA_ROUTE4_IIF,
+	TCA_ROUTE4_POLICE,
+	TCA_ROUTE4_ACT,
+	__TCA_ROUTE4_MAX
+};
+
+#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
+
+
+/* FW filter */
+
+enum
+{
+	TCA_FW_UNSPEC,
+	TCA_FW_CLASSID,
+	TCA_FW_POLICE,
+	TCA_FW_INDEV, /*  used by CONFIG_NET_CLS_IND */
+	TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
+	__TCA_FW_MAX
+};
+
+#define TCA_FW_MAX (__TCA_FW_MAX - 1)
+
+/* TC index filter */
+
+enum
+{
+	TCA_TCINDEX_UNSPEC,
+	TCA_TCINDEX_HASH,
+	TCA_TCINDEX_MASK,
+	TCA_TCINDEX_SHIFT,
+	TCA_TCINDEX_FALL_THROUGH,
+	TCA_TCINDEX_CLASSID,
+	TCA_TCINDEX_POLICE,
+	TCA_TCINDEX_ACT,
+	__TCA_TCINDEX_MAX
+};
+
+#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
+
+/* Basic filter */
+
+enum
+{
+	TCA_BASIC_UNSPEC,
+	TCA_BASIC_CLASSID,
+	TCA_BASIC_EMATCHES,
+	TCA_BASIC_ACT,
+	TCA_BASIC_POLICE,
+	__TCA_BASIC_MAX
+};
+
+#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
+
+/* Extended Matches */
+
+struct tcf_ematch_tree_hdr
+{
+	__u16		nmatches;
+	__u16		progid;
+};
+
+enum
+{
+	TCA_EMATCH_TREE_UNSPEC,
+	TCA_EMATCH_TREE_HDR,
+	TCA_EMATCH_TREE_LIST,
+	__TCA_EMATCH_TREE_MAX
+};
+#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
+
+struct tcf_ematch_hdr
+{
+	__u16		matchid;
+	__u16		kind;
+	__u16		flags;
+	__u16		pad; /* currently unused */
+};
+
+/*  0                   1
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 
+ * +-----------------------+-+-+---+
+ * |         Unused        |S|I| R |
+ * +-----------------------+-+-+---+
+ *
+ * R(2) ::= relation to next ematch
+ *          where: 0 0 END (last ematch)
+ *                 0 1 AND
+ *                 1 0 OR
+ *                 1 1 Unused (invalid)
+ * I(1) ::= invert result
+ * S(1) ::= simple payload
+ */
+#define TCF_EM_REL_END	0
+#define TCF_EM_REL_AND	(1<<0)
+#define TCF_EM_REL_OR	(1<<1)
+#define TCF_EM_INVERT	(1<<2)
+#define TCF_EM_SIMPLE	(1<<3)
+
+#define TCF_EM_REL_MASK	3
+#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
+
+enum
+{
+	TCF_LAYER_LINK,
+	TCF_LAYER_NETWORK,
+	TCF_LAYER_TRANSPORT,
+	__TCF_LAYER_MAX
+};
+#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
+
+/* Ematch type assignments
+ *   1..32767		Reserved for ematches inside kernel tree
+ *   32768..65535	Free to use, not reliable
+ */
+enum
+{
+	TCF_EM_CONTAINER,
+	TCF_EM_CMP,
+	TCF_EM_NBYTE,
+	TCF_EM_U32,
+	TCF_EM_META,
+	__TCF_EM_MAX
+};
+
+enum
+{
+	TCF_EM_PROG_TC
+};
+
+enum
+{
+	TCF_EM_OPND_EQ,
+	TCF_EM_OPND_GT,
+	TCF_EM_OPND_LT
+};
+
+#endif
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
new file mode 100644
index 000000000000..73d84c071cb1
--- /dev/null
+++ b/include/linux/pkt_sched.h
@@ -0,0 +1,454 @@
+#ifndef __LINUX_PKT_SCHED_H
+#define __LINUX_PKT_SCHED_H
+
+/* Logical priority bands not depending on specific packet scheduler.
+   Every scheduler will map them to real traffic classes, if it has
+   no more precise mechanism to classify packets.
+
+   These numbers have no special meaning, though their coincidence
+   with obsolete IPv6 values is not occasional :-). New IPv6 drafts
+   preferred full anarchy inspired by diffserv group.
+
+   Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
+   class, actually, as rule it will be handled with more care than
+   filler or even bulk.
+ */
+
+#define TC_PRIO_BESTEFFORT		0
+#define TC_PRIO_FILLER			1
+#define TC_PRIO_BULK			2
+#define TC_PRIO_INTERACTIVE_BULK	4
+#define TC_PRIO_INTERACTIVE		6
+#define TC_PRIO_CONTROL			7
+
+#define TC_PRIO_MAX			15
+
+/* Generic queue statistics, available for all the elements.
+   Particular schedulers may have also their private records.
+ */
+
+struct tc_stats
+{
+	__u64	bytes;			/* NUmber of enqueues bytes */
+	__u32	packets;		/* Number of enqueued packets	*/
+	__u32	drops;			/* Packets dropped because of lack of resources */
+	__u32	overlimits;		/* Number of throttle events when this
+					 * flow goes out of allocated bandwidth */
+	__u32	bps;			/* Current flow byte rate */
+	__u32	pps;			/* Current flow packet rate */
+	__u32	qlen;
+	__u32	backlog;
+};
+
+struct tc_estimator
+{
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+/* "Handles"
+   ---------
+
+    All the traffic control objects have 32bit identifiers, or "handles".
+
+    They can be considered as opaque numbers from user API viewpoint,
+    but actually they always consist of two fields: major and
+    minor numbers, which are interpreted by kernel specially,
+    that may be used by applications, though not recommended.
+
+    F.e. qdisc handles always have minor number equal to zero,
+    classes (or flows) have major equal to parent qdisc major, and
+    minor uniquely identifying class inside qdisc.
+
+    Macros to manipulate handles:
+ */
+
+#define TC_H_MAJ_MASK (0xFFFF0000U)
+#define TC_H_MIN_MASK (0x0000FFFFU)
+#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
+#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
+#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
+
+#define TC_H_UNSPEC	(0U)
+#define TC_H_ROOT	(0xFFFFFFFFU)
+#define TC_H_INGRESS    (0xFFFFFFF1U)
+
+struct tc_ratespec
+{
+	unsigned char	cell_log;
+	unsigned char	__reserved;
+	unsigned short	feature;
+	short		addend;
+	unsigned short	mpu;
+	__u32		rate;
+};
+
+/* FIFO section */
+
+struct tc_fifo_qopt
+{
+	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
+};
+
+/* PRIO section */
+
+#define TCQ_PRIO_BANDS	16
+
+struct tc_prio_qopt
+{
+	int	bands;			/* Number of bands */
+	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
+};
+
+/* TBF section */
+
+struct tc_tbf_qopt
+{
+	struct tc_ratespec rate;
+	struct tc_ratespec peakrate;
+	__u32		limit;
+	__u32		buffer;
+	__u32		mtu;
+};
+
+enum
+{
+	TCA_TBF_UNSPEC,
+	TCA_TBF_PARMS,
+	TCA_TBF_RTAB,
+	TCA_TBF_PTAB,
+	__TCA_TBF_MAX,
+};
+
+#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
+
+
+/* TEQL section */
+
+/* TEQL does not require any parameters */
+
+/* SFQ section */
+
+struct tc_sfq_qopt
+{
+	unsigned	quantum;	/* Bytes per round allocated to flow */
+	int		perturb_period;	/* Period of hash perturbation */
+	__u32		limit;		/* Maximal packets in queue */
+	unsigned	divisor;	/* Hash divisor  */
+	unsigned	flows;		/* Maximal number of flows  */
+};
+
+/*
+ *  NOTE: limit, divisor and flows are hardwired to code at the moment.
+ *
+ *	limit=flows=128, divisor=1024;
+ *
+ *	The only reason for this is efficiency, it is possible
+ *	to change these parameters in compile time.
+ */
+
+/* RED section */
+
+enum
+{
+	TCA_RED_UNSPEC,
+	TCA_RED_PARMS,
+	TCA_RED_STAB,
+	__TCA_RED_MAX,
+};
+
+#define TCA_RED_MAX (__TCA_RED_MAX - 1)
+
+struct tc_red_qopt
+{
+	__u32		limit;		/* HARD maximal queue length (bytes)	*/
+	__u32		qth_min;	/* Min average length threshold (bytes) */
+	__u32		qth_max;	/* Max average length threshold (bytes) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;
+#define TC_RED_ECN	1
+};
+
+struct tc_red_xstats
+{
+	__u32           early;          /* Early drops */
+	__u32           pdrop;          /* Drops due to queue limits */
+	__u32           other;          /* Drops due to drop() calls */
+	__u32           marked;         /* Marked packets */
+};
+
+/* GRED section */
+
+#define MAX_DPs 16
+
+enum
+{
+       TCA_GRED_UNSPEC,
+       TCA_GRED_PARMS,
+       TCA_GRED_STAB,
+       TCA_GRED_DPS,
+	   __TCA_GRED_MAX,
+};
+
+#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
+
+#define TCA_SET_OFF TCA_GRED_PARMS
+struct tc_gred_qopt
+{
+       __u32           limit;          /* HARD maximal queue length (bytes)    
+*/
+       __u32           qth_min;        /* Min average length threshold (bytes) 
+*/
+       __u32           qth_max;        /* Max average length threshold (bytes) 
+*/
+       __u32           DP;             /* upto 2^32 DPs */
+       __u32           backlog;        
+       __u32           qave;   
+       __u32           forced; 
+       __u32           early;  
+       __u32           other;  
+       __u32           pdrop;  
+
+       unsigned char   Wlog;           /* log(W)               */
+       unsigned char   Plog;           /* log(P_max/(qth_max-qth_min)) */
+       unsigned char   Scell_log;      /* cell size for idle damping */
+       __u8            prio;		/* prio of this VQ */
+       __u32	packets;
+       __u32	bytesin;
+};
+/* gred setup */
+struct tc_gred_sopt
+{
+       __u32           DPs;
+       __u32           def_DP;
+       __u8            grio;
+};
+
+/* HTB section */
+#define TC_HTB_NUMPRIO		8
+#define TC_HTB_MAXDEPTH		8
+#define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
+
+struct tc_htb_opt
+{
+	struct tc_ratespec 	rate;
+	struct tc_ratespec 	ceil;
+	__u32	buffer;
+	__u32	cbuffer;
+	__u32	quantum;
+	__u32	level;		/* out only */
+	__u32	prio;
+};
+struct tc_htb_glob
+{
+	__u32 version;		/* to match HTB/TC */
+    	__u32 rate2quantum;	/* bps->quantum divisor */
+    	__u32 defcls;		/* default class number */
+	__u32 debug;		/* debug flags */
+
+	/* stats */
+	__u32 direct_pkts; /* count of non shapped packets */
+};
+enum
+{
+	TCA_HTB_UNSPEC,
+	TCA_HTB_PARMS,
+	TCA_HTB_INIT,
+	TCA_HTB_CTAB,
+	TCA_HTB_RTAB,
+	__TCA_HTB_MAX,
+};
+
+#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
+
+struct tc_htb_xstats
+{
+	__u32 lends;
+	__u32 borrows;
+	__u32 giants;	/* too big packets (rate will not be accurate) */
+	__u32 tokens;
+	__u32 ctokens;
+};
+
+/* HFSC section */
+
+struct tc_hfsc_qopt
+{
+	__u16	defcls;		/* default class */
+};
+
+struct tc_service_curve
+{
+	__u32	m1;		/* slope of the first segment in bps */
+	__u32	d;		/* x-projection of the first segment in us */
+	__u32	m2;		/* slope of the second segment in bps */
+};
+
+struct tc_hfsc_stats
+{
+	__u64	work;		/* total work done */
+	__u64	rtwork;		/* work done by real-time criteria */
+	__u32	period;		/* current period */
+	__u32	level;		/* class level in hierarchy */
+};
+
+enum
+{
+	TCA_HFSC_UNSPEC,
+	TCA_HFSC_RSC,
+	TCA_HFSC_FSC,
+	TCA_HFSC_USC,
+	__TCA_HFSC_MAX,
+};
+
+#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
+
+
+/* CBQ section */
+
+#define TC_CBQ_MAXPRIO		8
+#define TC_CBQ_MAXLEVEL		8
+#define TC_CBQ_DEF_EWMA		5
+
+struct tc_cbq_lssopt
+{
+	unsigned char	change;
+	unsigned char	flags;
+#define TCF_CBQ_LSS_BOUNDED	1
+#define TCF_CBQ_LSS_ISOLATED	2
+	unsigned char  	ewma_log;
+	unsigned char  	level;
+#define TCF_CBQ_LSS_FLAGS	1
+#define TCF_CBQ_LSS_EWMA	2
+#define TCF_CBQ_LSS_MAXIDLE	4
+#define TCF_CBQ_LSS_MINIDLE	8
+#define TCF_CBQ_LSS_OFFTIME	0x10
+#define TCF_CBQ_LSS_AVPKT	0x20
+	__u32		maxidle;
+	__u32		minidle;
+	__u32		offtime;
+	__u32		avpkt;
+};
+
+struct tc_cbq_wrropt
+{
+	unsigned char	flags;
+	unsigned char	priority;
+	unsigned char	cpriority;
+	unsigned char	__reserved;
+	__u32		allot;
+	__u32		weight;
+};
+
+struct tc_cbq_ovl
+{
+	unsigned char	strategy;
+#define	TC_CBQ_OVL_CLASSIC	0
+#define	TC_CBQ_OVL_DELAY	1
+#define	TC_CBQ_OVL_LOWPRIO	2
+#define	TC_CBQ_OVL_DROP		3
+#define	TC_CBQ_OVL_RCLASSIC	4
+	unsigned char	priority2;
+	__u32		penalty;
+};
+
+struct tc_cbq_police
+{
+	unsigned char	police;
+	unsigned char	__res1;
+	unsigned short	__res2;
+};
+
+struct tc_cbq_fopt
+{
+	__u32		split;
+	__u32		defmap;
+	__u32		defchange;
+};
+
+struct tc_cbq_xstats
+{
+	__u32		borrows;
+	__u32		overactions;
+	__s32		avgidle;
+	__s32		undertime;
+};
+
+enum
+{
+	TCA_CBQ_UNSPEC,
+	TCA_CBQ_LSSOPT,
+	TCA_CBQ_WRROPT,
+	TCA_CBQ_FOPT,
+	TCA_CBQ_OVL_STRATEGY,
+	TCA_CBQ_RATE,
+	TCA_CBQ_RTAB,
+	TCA_CBQ_POLICE,
+	__TCA_CBQ_MAX,
+};
+
+#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
+
+/* dsmark section */
+
+enum {
+	TCA_DSMARK_UNSPEC,
+	TCA_DSMARK_INDICES,
+	TCA_DSMARK_DEFAULT_INDEX,
+	TCA_DSMARK_SET_TC_INDEX,
+	TCA_DSMARK_MASK,
+	TCA_DSMARK_VALUE,
+	__TCA_DSMARK_MAX,
+};
+
+#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
+
+/* ATM  section */
+
+enum {
+	TCA_ATM_UNSPEC,
+	TCA_ATM_FD,		/* file/socket descriptor */
+	TCA_ATM_PTR,		/* pointer to descriptor - later */
+	TCA_ATM_HDR,		/* LL header */
+	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
+	TCA_ATM_ADDR,		/* PVC address (for output only) */
+	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
+	__TCA_ATM_MAX,
+};
+
+#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
+
+/* Network emulator */
+
+enum
+{
+	TCA_NETEM_UNSPEC,
+	TCA_NETEM_CORR,
+	TCA_NETEM_DELAY_DIST,
+	__TCA_NETEM_MAX,
+};
+
+#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
+
+struct tc_netem_qopt
+{
+	__u32	latency;	/* added delay (us) */
+	__u32   limit;		/* fifo limit (packets) */
+	__u32	loss;		/* random packet loss (0=none ~0=100%) */
+	__u32	gap;		/* re-ordering gap (0 for delay all) */
+	__u32   duplicate;	/* random packet dup  (0=none ~0=100%) */
+	__u32	jitter;		/* random jitter in latency (us) */
+};
+
+struct tc_netem_corr
+{
+	__u32	delay_corr;	/* delay correlation */
+	__u32	loss_corr;	/* packet loss correlation */
+	__u32	dup_corr;	/* duplicate correlation  */
+};
+
+#define NETEM_DIST_SCALE	8192
+
+#endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
new file mode 100644
index 000000000000..4e2d2a942ecb
--- /dev/null
+++ b/include/linux/pktcdvd.h
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef __PKTCDVD_H
+#define __PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG		1
+
+#define	MAX_WRITERS		8
+
+#define PKT_RB_POOL_SIZE	512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to sucessfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING		1
+#else
+#define USE_WCACHING		0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR		1
+#define	PACKET_CDRW		2
+#define PACKET_DVDR		3
+#define PACKET_DVDRW		4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE		1	/* pd is writable */
+#define PACKET_NWA_VALID	2	/* next writable address valid */
+#define PACKET_LRA_VALID	3	/* last recorded address valid */
+#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
+					/* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY	0
+#define PACKET_DISC_INCOMPLETE	1
+#define PACKET_DISC_COMPLETE	2
+#define PACKET_DISC_OTHER	3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1		1
+#define PACKET_MODE2		2
+#define PACKET_BLOCK_MODE1	8
+#define PACKET_BLOCK_MODE2	10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY		0
+#define PACKET_SESSION_INCOMPLETE	1
+#define PACKET_SESSION_RESERVED		2
+#define PACKET_SESSION_COMPLETE		3
+
+#define PACKET_MCN			"4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP	0
+#define PKT_CTRL_CMD_TEARDOWN	1
+#define PKT_CTRL_CMD_STATUS	2
+
+struct pkt_ctrl_command {
+	__u32 command;				/* in: Setup, teardown, status */
+	__u32 dev_index;			/* in/out: Device index */
+	__u32 dev;				/* in/out: Device nr for cdrw device */
+	__u32 pkt_dev;				/* in/out: Device nr for packet device */
+	__u32 num_devices;			/* out: Largest device index + 1 */
+	__u32 padding;				/* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC	('X')
+#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+#ifdef __KERNEL__
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/cdrom.h>
+
+struct packet_settings
+{
+	__u8			size;		/* packet size in (512 byte) sectors */
+	__u8			fp;		/* fixed packets */
+	__u8			link_loss;	/* the rest is specified
+						 * as per Mt Fuji */
+	__u8			write_type;
+	__u8			track_mode;
+	__u8			block_mode;
+};
+
+/*
+ * Very crude stats for now
+ */
+struct packet_stats
+{
+	unsigned long		pkt_started;
+	unsigned long		pkt_ended;
+	unsigned long		secs_w;
+	unsigned long		secs_rg;
+	unsigned long		secs_r;
+};
+
+struct packet_cdrw
+{
+	struct list_head	pkt_free_list;
+	struct list_head	pkt_active_list;
+	spinlock_t		active_list_lock; /* Serialize access to pkt_active_list */
+	struct task_struct	*thread;
+	atomic_t		pending_bios;
+};
+
+/*
+ * Switch to high speed reading after reading this many kilobytes
+ * with no interspersed writes.
+ */
+#define HI_SPEED_SWITCH 512
+
+struct packet_iosched
+{
+	atomic_t		attention;	/* Set to non-zero when queue processing is needed */
+	int			writing;	/* Non-zero when writing, zero when reading */
+	spinlock_t		lock;		/* Protecting read/write queue manipulations */
+	struct bio		*read_queue;
+	struct bio		*read_queue_tail;
+	struct bio		*write_queue;
+	struct bio		*write_queue_tail;
+	int			high_prio_read;	/* An important read request has been queued */
+	int			successive_reads;
+};
+
+/*
+ * 32 buffers of 2048 bytes
+ */
+#define PACKET_MAX_SIZE		32
+#define PAGES_PER_PACKET	(PACKET_MAX_SIZE * CD_FRAMESIZE / PAGE_SIZE)
+#define PACKET_MAX_SECTORS	(PACKET_MAX_SIZE * CD_FRAMESIZE >> 9)
+
+enum packet_data_state {
+	PACKET_IDLE_STATE,			/* Not used at the moment */
+	PACKET_WAITING_STATE,			/* Waiting for more bios to arrive, so */
+						/* we don't have to do as much */
+						/* data gathering */
+	PACKET_READ_WAIT_STATE,			/* Waiting for reads to fill in holes */
+	PACKET_WRITE_WAIT_STATE,		/* Waiting for the write to complete */
+	PACKET_RECOVERY_STATE,			/* Recover after read/write errors */
+	PACKET_FINISHED_STATE,			/* After write has finished */
+
+	PACKET_NUM_STATES			/* Number of possible states */
+};
+
+/*
+ * Information needed for writing a single packet
+ */
+struct pktcdvd_device;
+
+struct packet_data
+{
+	struct list_head	list;
+
+	spinlock_t		lock;		/* Lock protecting state transitions and */
+						/* orig_bios list */
+
+	struct bio		*orig_bios;	/* Original bios passed to pkt_make_request */
+	struct bio		*orig_bios_tail;/* that will be handled by this packet */
+	int			write_size;	/* Total size of all bios in the orig_bios */
+						/* list, measured in number of frames */
+
+	struct bio		*w_bio;		/* The bio we will send to the real CD */
+						/* device once we have all data for the */
+						/* packet we are going to write */
+	sector_t		sector;		/* First sector in this packet */
+	int			frames;		/* Number of frames in this packet */
+
+	enum packet_data_state	state;		/* Current state */
+	atomic_t		run_sm;		/* Incremented whenever the state */
+						/* machine needs to be run */
+	long			sleep_time;	/* Set this to non-zero to make the state */
+						/* machine run after this many jiffies. */
+
+	atomic_t		io_wait;	/* Number of pending IO operations */
+	atomic_t		io_errors;	/* Number of read/write errors during IO */
+
+	struct bio		*r_bios[PACKET_MAX_SIZE]; /* bios to use during data gathering */
+	struct page		*pages[PAGES_PER_PACKET];
+
+	int			cache_valid;	/* If non-zero, the data for the zone defined */
+						/* by the sector variable is completely cached */
+						/* in the pages[] vector. */
+
+	int			id;		/* ID number for debugging */
+	struct pktcdvd_device	*pd;
+};
+
+struct pkt_rb_node {
+	struct rb_node		rb_node;
+	struct bio		*bio;
+};
+
+struct packet_stacked_data
+{
+	struct bio		*bio;		/* Original read request bio */
+	struct pktcdvd_device	*pd;
+};
+#define PSD_POOL_SIZE		64
+
+struct pktcdvd_device
+{
+	struct block_device	*bdev;		/* dev attached */
+	dev_t			pkt_dev;	/* our dev */
+	char			name[20];
+	struct packet_settings	settings;
+	struct packet_stats	stats;
+	int			refcnt;		/* Open count */
+	int			write_speed;	/* current write speed, kB/s */
+	int			read_speed;	/* current read speed, kB/s */
+	unsigned long		offset;		/* start offset */
+	__u8			mode_offset;	/* 0 / 8 */
+	__u8			type;
+	unsigned long		flags;
+	__u16			mmc3_profile;
+	__u32			nwa;		/* next writable address */
+	__u32			lra;		/* last recorded address */
+	struct packet_cdrw	cdrw;
+	wait_queue_head_t	wqueue;
+
+	spinlock_t		lock;		/* Serialize access to bio_queue */
+	struct rb_root		bio_queue;	/* Work queue of bios we need to handle */
+	int			bio_queue_size;	/* Number of nodes in bio_queue */
+	sector_t		current_sector;	/* Keep track of where the elevator is */
+	atomic_t		scan_queue;	/* Set to non-zero when pkt_handle_queue */
+						/* needs to be run. */
+	mempool_t		*rb_pool;	/* mempool for pkt_rb_node allocations */
+
+	struct packet_iosched   iosched;
+	struct gendisk		*disk;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* __PKTCDVD_H */
diff --git a/include/linux/platform.h b/include/linux/platform.h
new file mode 100644
index 000000000000..3c33084a6ec2
--- /dev/null
+++ b/include/linux/platform.h
@@ -0,0 +1,43 @@
+/*
+ * include/linux/platform.h - platform driver definitions
+ *
+ * Because of the prolific consumerism of the average American,
+ * and the dominant marketing budgets of PC OEMs, we have been
+ * blessed with frequent updates of the PC architecture. 
+ *
+ * While most of these calls are singular per architecture, they 
+ * require an extra layer of abstraction on the x86 so the right
+ * subsystem gets the right call. 
+ *
+ * Basically, this consolidates the power off and reboot callbacks 
+ * into one structure, as well as adding power management hooks.
+ *
+ * When adding a platform driver, please make sure all callbacks are 
+ * filled. There are defaults defined below that do nothing; use those
+ * if you do not support that callback.
+ */ 
+
+#ifndef _PLATFORM_H_
+#define _PLATFORM_H_
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+struct platform_t {
+	char	* name;
+	u32	suspend_states;
+	void	(*reboot)(char * cmd);
+	void	(*halt)(void);
+	void	(*power_off)(void);
+	int	(*suspend)(int state, int flags);
+	void	(*idle)(void);
+};
+
+extern struct platform_t * platform;
+extern void default_reboot(char * cmd);
+extern void default_halt(void);
+extern int default_suspend(int state, int flags);
+extern void default_idle(void);
+
+#endif /* __KERNEL__ */
+#endif /* _PLATFORM_H */
diff --git a/include/linux/pm.h b/include/linux/pm.h
new file mode 100644
index 000000000000..ed2b76e75199
--- /dev/null
+++ b/include/linux/pm.h
@@ -0,0 +1,233 @@
+/*
+ *  pm.h - Power management interface
+ *
+ *  Copyright (C) 2000 Andrew Henroid
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_PM_H
+#define _LINUX_PM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <asm/atomic.h>
+
+/*
+ * Power management requests... these are passed to pm_send_all() and friends.
+ *
+ * these functions are old and deprecated, see below.
+ */
+typedef int __bitwise pm_request_t;
+
+#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
+#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
+
+
+/*
+ * Device types... these are passed to pm_register
+ */
+typedef int __bitwise pm_dev_t;
+
+#define PM_UNKNOWN_DEV	((__force pm_dev_t) 0)	/* generic */
+#define PM_SYS_DEV	((__force pm_dev_t) 1)	/* system device (fan, KB controller, ...) */
+#define PM_PCI_DEV	((__force pm_dev_t) 2)	/* PCI device */
+#define PM_USB_DEV	((__force pm_dev_t) 3)	/* USB device */
+#define PM_SCSI_DEV	((__force pm_dev_t) 4)	/* SCSI device */
+#define PM_ISA_DEV	((__force pm_dev_t) 5)	/* ISA device */
+#define	PM_MTD_DEV	((__force pm_dev_t) 6)	/* Memory Technology Device */
+
+/*
+ * System device hardware ID (PnP) values
+ */
+enum
+{
+	PM_SYS_UNKNOWN = 0x00000000, /* generic */
+	PM_SYS_KBC =	 0x41d00303, /* keyboard controller */
+	PM_SYS_COM =	 0x41d00500, /* serial port */
+	PM_SYS_IRDA =	 0x41d00510, /* IRDA controller */
+	PM_SYS_FDC =	 0x41d00700, /* floppy controller */
+	PM_SYS_VGA =	 0x41d00900, /* VGA controller */
+	PM_SYS_PCMCIA =	 0x41d00e00, /* PCMCIA controller */
+};
+
+/*
+ * Device identifier
+ */
+#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
+
+/*
+ * Request handler callback
+ */
+struct pm_dev;
+
+typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/*
+ * Dynamic device information
+ */
+struct pm_dev
+{
+	pm_dev_t	 type;
+	unsigned long	 id;
+	pm_callback	 callback;
+	void		*data;
+
+	unsigned long	 flags;
+	unsigned long	 state;
+	unsigned long	 prev_state;
+
+	struct list_head entry;
+};
+
+#ifdef CONFIG_PM
+
+extern int pm_active;
+
+#define PM_IS_ACTIVE() (pm_active != 0)
+
+/*
+ * Register a device with power management
+ */
+struct pm_dev __deprecated *pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
+
+/*
+ * Unregister a device with power management
+ */
+void __deprecated pm_unregister(struct pm_dev *dev);
+
+/*
+ * Unregister all devices with matching callback
+ */
+void __deprecated pm_unregister_all(pm_callback callback);
+
+/*
+ * Send a request to all devices
+ */
+int __deprecated pm_send_all(pm_request_t rqst, void *data);
+
+#else /* CONFIG_PM */
+
+#define PM_IS_ACTIVE() 0
+
+static inline struct pm_dev *pm_register(pm_dev_t type,
+					 unsigned long id,
+					 pm_callback callback)
+{
+	return NULL;
+}
+
+static inline void pm_unregister(struct pm_dev *dev) {}
+
+static inline void pm_unregister_all(pm_callback callback) {}
+
+static inline int pm_send_all(pm_request_t rqst, void *data)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/* Functions above this comment are list-based old-style power
+ * managment. Please avoid using them.  */
+
+/*
+ * Callbacks for platform drivers to implement.
+ */
+extern void (*pm_idle)(void);
+extern void (*pm_power_off)(void);
+
+typedef int __bitwise suspend_state_t;
+
+#define PM_SUSPEND_ON		((__force suspend_state_t) 0)
+#define PM_SUSPEND_STANDBY	((__force suspend_state_t) 1)
+#define PM_SUSPEND_MEM		((__force suspend_state_t) 3)
+#define PM_SUSPEND_DISK		((__force suspend_state_t) 4)
+#define PM_SUSPEND_MAX		((__force suspend_state_t) 5)
+
+typedef int __bitwise suspend_disk_method_t;
+
+#define	PM_DISK_FIRMWARE	((__force suspend_disk_method_t) 1)
+#define	PM_DISK_PLATFORM	((__force suspend_disk_method_t) 2)
+#define	PM_DISK_SHUTDOWN	((__force suspend_disk_method_t) 3)
+#define	PM_DISK_REBOOT		((__force suspend_disk_method_t) 4)
+#define	PM_DISK_MAX		((__force suspend_disk_method_t) 5)
+
+struct pm_ops {
+	suspend_disk_method_t pm_disk_mode;
+	int (*prepare)(suspend_state_t state);
+	int (*enter)(suspend_state_t state);
+	int (*finish)(suspend_state_t state);
+};
+
+extern void pm_set_ops(struct pm_ops *);
+
+extern int pm_suspend(suspend_state_t state);
+
+
+/*
+ * Device power management
+ */
+
+struct device;
+
+typedef u32 __bitwise pm_message_t;
+
+/*
+ * There are 4 important states driver can be in:
+ * ON     -- driver is working
+ * FREEZE -- stop operations and apply whatever policy is applicable to a suspended driver
+ *           of that class, freeze queues for block like IDE does, drop packets for
+ *           ethernet, etc... stop DMA engine too etc... so a consistent image can be
+ *           saved; but do not power any hardware down.
+ * SUSPEND - like FREEZE, but hardware is doing as much powersaving as possible. Roughly
+ *           pci D3.
+ *
+ * Unfortunately, current drivers only recognize numeric values 0 (ON) and 3 (SUSPEND).
+ * We'll need to fix the drivers. So yes, putting 3 to all diferent defines is intentional,
+ * and will go away as soon as drivers are fixed. Also note that typedef is neccessary,
+ * we'll probably want to switch to
+ *   typedef struct pm_message_t { int event; int flags; } pm_message_t
+ * or something similar soon.
+ */
+
+#define PMSG_FREEZE	((__force pm_message_t) 3)
+#define PMSG_SUSPEND	((__force pm_message_t) 3)
+#define PMSG_ON		((__force pm_message_t) 0)
+
+struct dev_pm_info {
+	pm_message_t		power_state;
+#ifdef	CONFIG_PM
+	pm_message_t		prev_state;
+	void			* saved_state;
+	atomic_t		pm_users;
+	struct device		* pm_parent;
+	struct list_head	entry;
+#endif
+};
+
+extern void device_pm_set_parent(struct device * dev, struct device * parent);
+
+extern int device_suspend(pm_message_t state);
+extern int device_power_down(pm_message_t state);
+extern void device_power_up(void);
+extern void device_resume(void);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_PM_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
new file mode 100644
index 000000000000..6d73eada277e
--- /dev/null
+++ b/include/linux/pmu.h
@@ -0,0 +1,240 @@
+/*
+ * Definitions for talking to the PMU.  The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#include <linux/config.h>
+
+#define PMU_DRIVER_VERSION	2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
+#define PMU_POWER_CTRL		0x11	/* control power of some devices */
+#define PMU_ADB_CMD		0x20	/* send ADB packet */
+#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
+#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
+#define PMU_SET_RTC		0x30	/* set real-time clock */
+#define PMU_READ_RTC		0x38	/* read real-time clock */
+#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
+#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
+#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
+#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
+#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
+#define PMU_INT_ACK		0x78	/* read interrupt bits */
+#define PMU_SHUTDOWN		0x7e	/* turn power off */
+#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
+#define PMU_SLEEP		0x7f	/* put CPU to sleep */
+#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
+#define PMU_I2C_CMD		0x9a	/* I2C operations */
+#define PMU_RESET		0xd0	/* reset CPU */
+#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
+#define PMU_GET_COVER		0xdc	/* report cover open/closed */
+#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
+#define PMU_GET_VERSION		0xea	/* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
+#define PMU_POW_CHARGER		0x02	/* battery charger power */
+#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
+#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
+#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
+#define PMU_INT_BATTERY		0x20	/* Battery state change */
+#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
+#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
+#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE	0
+#define PMU_I2C_MODE_STDSUB	1
+#define PMU_I2C_MODE_COMBINED	2
+
+#define PMU_I2C_BUS_STATUS	0
+#define PMU_I2C_BUS_SYSCLK	1
+#define PMU_I2C_BUS_POWER	2
+
+#define PMU_I2C_STATUS_OK	0
+#define PMU_I2C_STATUS_DATAREAD	1
+#define PMU_I2C_STATUS_BUSY	0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+	PMU_UNKNOWN,
+	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
+	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
+	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
+	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
+	PMU_68K_V1,		/* 68K PMU, version 1 */
+	PMU_68K_V2, 		/* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
+	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
+	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
+	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
+	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
+	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
+	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
+	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
+	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
+	PMU_PWR_WAKEUP_RING		= 0x10,
+};
+	
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP		_IO('B', 0)
+/* out param: u32*	backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
+/* in param: u32	backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
+/* out param: u32*	PMU model */
+#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
+/* out param: u32*	has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
+/* out param: u32*	can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
+
+#ifdef __KERNEL__
+
+extern int find_via_pmu(void);
+
+extern int pmu_request(struct adb_request *req,
+		void (*done)(struct adb_request *), int nbytes, ...);
+
+extern void pmu_poll(void);
+extern void pmu_poll_adb(void); /* For use by xmon */
+extern void pmu_wait_complete(struct adb_request *req);
+
+/* For use before switching interrupts off for a long time;
+ * warning: not stackable
+ */
+extern void pmu_suspend(void);
+extern void pmu_resume(void);
+
+extern void pmu_enable_irled(int on);
+
+extern void pmu_restart(void);
+extern void pmu_shutdown(void);
+extern void pmu_unlock(void);
+
+extern int pmu_present(void);
+extern int pmu_get_model(void);
+
+extern int pmu_i2c_combined_read(int bus, int addr, int subaddr,  u8* data, int len);
+extern int pmu_i2c_stdsub_write(int bus, int addr, int subaddr,  u8* data, int len);
+extern int pmu_i2c_simple_read(int bus, int addr,  u8* data, int len);
+extern int pmu_i2c_simple_write(int bus, int addr,  u8* data, int len);
+
+
+#ifdef CONFIG_PMAC_PBOOK
+/*
+ * Stuff for putting the powerbook to sleep and waking it again.
+ *
+ */
+#include <linux/list.h>
+
+struct pmu_sleep_notifier
+{
+	int (*notifier_call)(struct pmu_sleep_notifier *self, int when);
+	int priority;
+	struct list_head list;
+};
+
+/* Code values for calling sleep/wakeup handlers
+ *
+ * Note: If a sleep request got cancelled, all drivers will get
+ * the PBOOK_SLEEP_REJECT, even those who didn't get the PBOOK_SLEEP_REQUEST.
+ */
+#define PBOOK_SLEEP_REQUEST	1
+#define PBOOK_SLEEP_NOW		2
+#define PBOOK_SLEEP_REJECT	3
+#define PBOOK_WAKE		4
+
+/* Result codes returned by the notifiers */
+#define PBOOK_SLEEP_OK		0
+#define PBOOK_SLEEP_REFUSE	-1
+
+/* priority levels in notifiers */
+#define SLEEP_LEVEL_VIDEO	100	/* Video driver (first wake) */
+#define SLEEP_LEVEL_MEDIABAY	90	/* Media bay driver */
+#define SLEEP_LEVEL_BLOCK	80	/* IDE, SCSI */
+#define SLEEP_LEVEL_NET		70	/* bmac, gmac */
+#define SLEEP_LEVEL_MISC	60	/* Anything else */
+#define SLEEP_LEVEL_USERLAND	55	/* Reserved for apm_emu */
+#define SLEEP_LEVEL_ADB		50	/* ADB (async) */
+#define SLEEP_LEVEL_SOUND	40	/* Sound driver (blocking) */
+
+/* special register notifier functions */
+int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
+int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
+
+#define PMU_MAX_BATTERIES	2
+
+/* values for pmu_power_flags */
+#define PMU_PWR_AC_PRESENT	0x00000001
+
+/* values for pmu_battery_info.flags */
+#define PMU_BATT_PRESENT	0x00000001
+#define PMU_BATT_CHARGING	0x00000002
+#define PMU_BATT_TYPE_MASK	0x000000f0
+#define PMU_BATT_TYPE_SMART	0x00000010 /* Smart battery */
+#define PMU_BATT_TYPE_HOOPER	0x00000020 /* 3400/3500 */
+#define PMU_BATT_TYPE_COMET	0x00000030 /* 2400 */
+
+struct pmu_battery_info
+{
+	unsigned int	flags;
+	unsigned int	charge;		/* current charge */
+	unsigned int	max_charge;	/* maximum charge */
+	signed int	amperage;	/* current, positive if charging */
+	unsigned int	voltage;	/* voltage */
+	unsigned int	time_remaining;	/* remaining time */
+};
+
+extern int pmu_battery_count;
+extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
+extern unsigned int pmu_power_flags;
+
+#endif /* CONFIG_PMAC_PBOOK */
+
+#endif	/* __KERNEL__ */
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
new file mode 100644
index 000000000000..5ec2bd0c2848
--- /dev/null
+++ b/include/linux/pnp.h
@@ -0,0 +1,454 @@
+/*
+ * Linux Plug and Play Support
+ * Copyright by Adam Belay <ambx1@neo.rr.com>
+ *
+ */
+
+#ifndef _LINUX_PNP_H
+#define _LINUX_PNP_H
+
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/mod_devicetable.h>
+
+#define PNP_MAX_PORT		8
+#define PNP_MAX_MEM		4
+#define PNP_MAX_IRQ		2
+#define PNP_MAX_DMA		2
+#define PNP_NAME_LEN		50
+
+struct pnp_protocol;
+struct pnp_dev;
+
+
+/*
+ * Resource Management
+ */
+
+/* Use these instead of directly reading pnp_dev to get resource information */
+#define pnp_port_start(dev,bar)   ((dev)->res.port_resource[(bar)].start)
+#define pnp_port_end(dev,bar)     ((dev)->res.port_resource[(bar)].end)
+#define pnp_port_flags(dev,bar)   ((dev)->res.port_resource[(bar)].flags)
+#define pnp_port_valid(dev,bar) \
+	((pnp_port_flags((dev),(bar)) & (IORESOURCE_IO | IORESOURCE_UNSET)) \
+		== IORESOURCE_IO)
+#define pnp_port_len(dev,bar) \
+	((pnp_port_start((dev),(bar)) == 0 &&	\
+	  pnp_port_end((dev),(bar)) ==		\
+	  pnp_port_start((dev),(bar))) ? 0 :	\
+	  					\
+	 (pnp_port_end((dev),(bar)) -		\
+	  pnp_port_start((dev),(bar)) + 1))
+
+#define pnp_mem_start(dev,bar)   ((dev)->res.mem_resource[(bar)].start)
+#define pnp_mem_end(dev,bar)     ((dev)->res.mem_resource[(bar)].end)
+#define pnp_mem_flags(dev,bar)   ((dev)->res.mem_resource[(bar)].flags)
+#define pnp_mem_valid(dev,bar) \
+	((pnp_mem_flags((dev),(bar)) & (IORESOURCE_MEM | IORESOURCE_UNSET)) \
+		== IORESOURCE_MEM)
+#define pnp_mem_len(dev,bar) \
+	((pnp_mem_start((dev),(bar)) == 0 &&	\
+	  pnp_mem_end((dev),(bar)) ==		\
+	  pnp_mem_start((dev),(bar))) ? 0 :	\
+	  					\
+	 (pnp_mem_end((dev),(bar)) -		\
+	  pnp_mem_start((dev),(bar)) + 1))
+
+#define pnp_irq(dev,bar)	 ((dev)->res.irq_resource[(bar)].start)
+#define pnp_irq_flags(dev,bar)	 ((dev)->res.irq_resource[(bar)].flags)
+#define pnp_irq_valid(dev,bar) \
+	((pnp_irq_flags((dev),(bar)) & (IORESOURCE_IRQ | IORESOURCE_UNSET)) \
+		== IORESOURCE_IRQ)
+
+#define pnp_dma(dev,bar)	 ((dev)->res.dma_resource[(bar)].start)
+#define pnp_dma_flags(dev,bar)	 ((dev)->res.dma_resource[(bar)].flags)
+#define pnp_dma_valid(dev,bar) \
+	((pnp_dma_flags((dev),(bar)) & (IORESOURCE_DMA | IORESOURCE_UNSET)) \
+		== IORESOURCE_DMA)
+
+#define PNP_PORT_FLAG_16BITADDR	(1<<0)
+#define PNP_PORT_FLAG_FIXED	(1<<1)
+
+struct pnp_port {
+	unsigned short min;		/* min base number */
+	unsigned short max;		/* max base number */
+	unsigned char align;		/* align boundary */
+	unsigned char size;		/* size of range */
+	unsigned char flags;		/* port flags */
+	unsigned char pad;		/* pad */
+	struct pnp_port *next;		/* next port */
+};
+
+#define PNP_IRQ_NR 256
+struct pnp_irq {
+	DECLARE_BITMAP(map, PNP_IRQ_NR); /* bitmaks for IRQ lines */
+	unsigned char flags;		/* IRQ flags */
+	unsigned char pad;		/* pad */
+	struct pnp_irq *next;		/* next IRQ */
+};
+
+struct pnp_dma {
+	unsigned char map;		/* bitmask for DMA channels */
+	unsigned char flags;		/* DMA flags */
+	struct pnp_dma *next;		/* next port */
+};
+
+struct pnp_mem {
+	unsigned int min;		/* min base number */
+	unsigned int max;		/* max base number */
+	unsigned int align;		/* align boundary */
+	unsigned int size;		/* size of range */
+	unsigned char flags;		/* memory flags */
+	unsigned char pad;		/* pad */
+	struct pnp_mem *next;		/* next memory resource */
+};
+
+#define PNP_RES_PRIORITY_PREFERRED	0
+#define PNP_RES_PRIORITY_ACCEPTABLE	1
+#define PNP_RES_PRIORITY_FUNCTIONAL	2
+#define PNP_RES_PRIORITY_INVALID	65535
+
+struct pnp_option {
+	unsigned short priority;	/* priority */
+	struct pnp_port *port;		/* first port */
+	struct pnp_irq *irq;		/* first IRQ */
+	struct pnp_dma *dma;		/* first DMA */
+	struct pnp_mem *mem;		/* first memory resource */
+	struct pnp_option *next;	/* used to chain dependent resources */
+};
+
+struct pnp_resource_table {
+	struct resource port_resource[PNP_MAX_PORT];
+	struct resource mem_resource[PNP_MAX_MEM];
+	struct resource dma_resource[PNP_MAX_DMA];
+	struct resource irq_resource[PNP_MAX_IRQ];
+};
+
+
+/*
+ * Device Managemnt
+ */
+
+struct pnp_card {
+	struct device dev;		/* Driver Model device interface */
+	unsigned char number;		/* used as an index, must be unique */
+	struct list_head global_list;	/* node in global list of cards */
+	struct list_head protocol_list;	/* node in protocol's list of cards */
+	struct list_head devices;	/* devices attached to the card */
+
+	struct pnp_protocol * protocol;
+	struct pnp_id * id;		/* contains supported EISA IDs*/
+
+	char name[PNP_NAME_LEN];	/* contains a human-readable name */
+	unsigned char	pnpver;		/* Plug & Play version */
+	unsigned char	productver;	/* product version */
+	unsigned int	serial;		/* serial number */
+	unsigned char	checksum;	/* if zero - checksum passed */
+	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/isapnp */
+};
+
+#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
+#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
+#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
+#define pnp_for_each_card(card) \
+	for((card) = global_to_pnp_card(pnp_cards.next); \
+	(card) != global_to_pnp_card(&pnp_cards); \
+	(card) = global_to_pnp_card((card)->global_list.next))
+
+struct pnp_card_link {
+	struct pnp_card * card;
+	struct pnp_card_driver * driver;
+	void * driver_data;
+};
+
+static inline void *pnp_get_card_drvdata (struct pnp_card_link *pcard)
+{
+	return pcard->driver_data;
+}
+
+static inline void pnp_set_card_drvdata (struct pnp_card_link *pcard, void *data)
+{
+	pcard->driver_data = data;
+}
+
+struct pnp_dev {
+	struct device dev;		/* Driver Model device interface */
+	unsigned char number;		/* used as an index, must be unique */
+	int status;
+
+	struct list_head global_list;	/* node in global list of devices */
+	struct list_head protocol_list;	/* node in list of device's protocol */
+	struct list_head card_list;	/* node in card's list of devices */
+	struct list_head rdev_list;	/* node in cards list of requested devices */
+
+	struct pnp_protocol * protocol;
+	struct pnp_card * card;		/* card the device is attached to, none if NULL */
+	struct pnp_driver * driver;
+	struct pnp_card_link * card_link;
+
+	struct pnp_id	* id;	/* supported EISA IDs*/
+
+	int active;
+	int capabilities;
+	struct pnp_option * independent;
+	struct pnp_option * dependent;
+	struct pnp_resource_table res;
+
+	char name[PNP_NAME_LEN];	/* contains a human-readable name */
+	unsigned short	regs;		/* ISAPnP: supported registers */
+	int 		flags;		/* used by protocols */
+	struct proc_dir_entry *procent;	/* device entry in /proc/bus/isapnp */
+	void *data;
+};
+
+#define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
+#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
+#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
+#define	to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
+#define pnp_for_each_dev(dev) \
+	for((dev) = global_to_pnp_dev(pnp_global.next); \
+	(dev) != global_to_pnp_dev(&pnp_global); \
+	(dev) = global_to_pnp_dev((dev)->global_list.next))
+#define card_for_each_dev(card,dev) \
+	for((dev) = card_to_pnp_dev((card)->devices.next); \
+	(dev) != card_to_pnp_dev(&(card)->devices); \
+	(dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_dev_name(dev) (dev)->name
+
+static inline void *pnp_get_drvdata (struct pnp_dev *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void pnp_set_drvdata (struct pnp_dev *pdev, void *data)
+{
+	dev_set_drvdata(&pdev->dev, data);
+}
+
+struct pnp_fixup {
+	char id[7];
+	void (*quirk_function)(struct pnp_dev *dev);	/* fixup function */
+};
+
+/* config parameters */
+#define PNP_CONFIG_NORMAL	0x0001
+#define PNP_CONFIG_FORCE	0x0002	/* disables validity checking */
+
+/* capabilities */
+#define PNP_READ		0x0001
+#define PNP_WRITE		0x0002
+#define PNP_DISABLE		0x0004
+#define PNP_CONFIGURABLE	0x0008
+#define PNP_REMOVABLE		0x0010
+
+#define pnp_can_read(dev)	(((dev)->protocol) && ((dev)->protocol->get) && \
+				 ((dev)->capabilities & PNP_READ))
+#define pnp_can_write(dev)	(((dev)->protocol) && ((dev)->protocol->set) && \
+				 ((dev)->capabilities & PNP_WRITE))
+#define pnp_can_disable(dev)	(((dev)->protocol) && ((dev)->protocol->disable) && \
+				 ((dev)->capabilities & PNP_DISABLE))
+#define pnp_can_configure(dev)	((!(dev)->active) && \
+				 ((dev)->capabilities & PNP_CONFIGURABLE))
+
+#ifdef CONFIG_ISAPNP
+extern struct pnp_protocol isapnp_protocol;
+#define pnp_device_is_isapnp(dev) ((dev)->protocol == (&isapnp_protocol))
+#else
+#define pnp_device_is_isapnp(dev) 0
+#endif
+
+#ifdef CONFIG_PNPBIOS
+extern struct pnp_protocol pnpbios_protocol;
+#define pnp_device_is_pnpbios(dev) ((dev)->protocol == (&pnpbios_protocol))
+#else
+#define pnp_device_is_pnpbios(dev) 0
+#endif
+
+
+/* status */
+#define PNP_READY		0x0000
+#define PNP_ATTACHED		0x0001
+#define PNP_BUSY		0x0002
+#define PNP_FAULTY		0x0004
+
+/* isapnp specific macros */
+
+#define isapnp_card_number(dev)	((dev)->card ? (dev)->card->number : -1)
+#define isapnp_csn_number(dev)  ((dev)->number)
+
+/*
+ * Driver Management
+ */
+
+struct pnp_id {
+	char id[PNP_ID_LEN];
+	struct pnp_id * next;
+};
+
+struct pnp_driver {
+	char * name;
+	const struct pnp_device_id *id_table;
+	unsigned int flags;
+	int  (*probe)  (struct pnp_dev *dev, const struct pnp_device_id *dev_id);
+	void (*remove) (struct pnp_dev *dev);
+	struct device_driver driver;
+};
+
+#define	to_pnp_driver(drv) container_of(drv, struct pnp_driver, driver)
+
+struct pnp_card_driver {
+	struct list_head global_list;
+	char * name;
+	const struct pnp_card_device_id *id_table;
+	unsigned int flags;
+	int  (*probe)  (struct pnp_card_link *card, const struct pnp_card_device_id *card_id);
+	void (*remove) (struct pnp_card_link *card);
+	struct pnp_driver link;
+};
+
+#define	to_pnp_card_driver(drv) container_of(drv, struct pnp_card_driver, link)
+
+/* pnp driver flags */
+#define PNP_DRIVER_RES_DO_NOT_CHANGE	0x0001	/* do not change the state of the device */
+#define PNP_DRIVER_RES_DISABLE		0x0003	/* ensure the device is disabled */
+
+
+/*
+ * Protocol Management
+ */
+
+struct pnp_protocol {
+	struct list_head	protocol_list;
+	char		      * name;
+
+	/* resource control functions */
+	int (*get)(struct pnp_dev *dev, struct pnp_resource_table *res);
+	int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res);
+	int (*disable)(struct pnp_dev *dev);
+
+	/* used by pnp layer only (look but don't touch) */
+	unsigned char		number;		/* protocol number*/
+	struct device		dev;		/* link to driver model */
+	struct list_head	cards;
+	struct list_head	devices;
+};
+
+#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
+#define protocol_for_each_card(protocol,card) \
+	for((card) = protocol_to_pnp_card((protocol)->cards.next); \
+	(card) != protocol_to_pnp_card(&(protocol)->cards); \
+	(card) = protocol_to_pnp_card((card)->protocol_list.next))
+#define protocol_for_each_dev(protocol,dev) \
+	for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
+	(dev) != protocol_to_pnp_dev(&(protocol)->devices); \
+	(dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+
+
+#if defined(CONFIG_PNP)
+
+/* device management */
+int pnp_register_protocol(struct pnp_protocol *protocol);
+void pnp_unregister_protocol(struct pnp_protocol *protocol);
+int pnp_add_device(struct pnp_dev *dev);
+void pnp_remove_device(struct pnp_dev *dev);
+int pnp_device_attach(struct pnp_dev *pnp_dev);
+void pnp_device_detach(struct pnp_dev *pnp_dev);
+extern struct list_head pnp_global;
+
+/* multidevice card support */
+int pnp_add_card(struct pnp_card *card);
+void pnp_remove_card(struct pnp_card *card);
+int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev);
+void pnp_remove_card_device(struct pnp_dev *dev);
+int pnp_add_card_id(struct pnp_id *id, struct pnp_card *card);
+struct pnp_dev * pnp_request_card_device(struct pnp_card_link *clink, const char * id, struct pnp_dev * from);
+void pnp_release_card_device(struct pnp_dev * dev);
+int pnp_register_card_driver(struct pnp_card_driver * drv);
+void pnp_unregister_card_driver(struct pnp_card_driver * drv);
+extern struct list_head pnp_cards;
+
+/* resource management */
+struct pnp_option * pnp_register_independent_option(struct pnp_dev *dev);
+struct pnp_option * pnp_register_dependent_option(struct pnp_dev *dev, int priority);
+int pnp_register_irq_resource(struct pnp_option *option, struct pnp_irq *data);
+int pnp_register_dma_resource(struct pnp_option *option, struct pnp_dma *data);
+int pnp_register_port_resource(struct pnp_option *option, struct pnp_port *data);
+int pnp_register_mem_resource(struct pnp_option *option, struct pnp_mem *data);
+void pnp_init_resource_table(struct pnp_resource_table *table);
+int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode);
+int pnp_auto_config_dev(struct pnp_dev *dev);
+int pnp_validate_config(struct pnp_dev *dev);
+int pnp_activate_dev(struct pnp_dev *dev);
+int pnp_disable_dev(struct pnp_dev *dev);
+void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size);
+
+/* protocol helpers */
+int pnp_is_active(struct pnp_dev * dev);
+int compare_pnp_id(struct pnp_id * pos, const char * id);
+int pnp_add_id(struct pnp_id *id, struct pnp_dev *dev);
+int pnp_register_driver(struct pnp_driver *drv);
+void pnp_unregister_driver(struct pnp_driver *drv);
+
+#else
+
+/* device management */
+static inline int pnp_register_protocol(struct pnp_protocol *protocol) { return -ENODEV; }
+static inline void pnp_unregister_protocol(struct pnp_protocol *protocol) { }
+static inline int pnp_init_device(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_add_device(struct pnp_dev *dev) { return -ENODEV; }
+static inline void pnp_remove_device(struct pnp_dev *dev) { }
+static inline int pnp_device_attach(struct pnp_dev *pnp_dev) { return -ENODEV; }
+static inline void pnp_device_detach(struct pnp_dev *pnp_dev) { ; }
+
+/* multidevice card support */
+static inline int pnp_add_card(struct pnp_card *card) { return -ENODEV; }
+static inline void pnp_remove_card(struct pnp_card *card) { ; }
+static inline int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev) { return -ENODEV; }
+static inline void pnp_remove_card_device(struct pnp_dev *dev) { ; }
+static inline int pnp_add_card_id(struct pnp_id *id, struct pnp_card *card) { return -ENODEV; }
+static inline struct pnp_dev * pnp_request_card_device(struct pnp_card_link *clink, const char * id, struct pnp_dev * from) { return NULL; }
+static inline void pnp_release_card_device(struct pnp_dev * dev) { ; }
+static inline int pnp_register_card_driver(struct pnp_card_driver * drv) { return -ENODEV; }
+static inline void pnp_unregister_card_driver(struct pnp_card_driver * drv) { ; }
+
+/* resource management */
+static inline struct pnp_option * pnp_register_independent_option(struct pnp_dev *dev) { return NULL; }
+static inline struct pnp_option * pnp_register_dependent_option(struct pnp_dev *dev, int priority) { return NULL; }
+static inline int pnp_register_irq_resource(struct pnp_option *option, struct pnp_irq *data) { return -ENODEV; }
+static inline int pnp_register_dma_resource(struct pnp_option *option, struct pnp_dma *data) { return -ENODEV; }
+static inline int pnp_register_port_resource(struct pnp_option *option, struct pnp_port *data) { return -ENODEV; }
+static inline int pnp_register_mem_resource(struct pnp_option *option, struct pnp_mem *data) { return -ENODEV; }
+static inline void pnp_init_resource_table(struct pnp_resource_table *table) { }
+static inline int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode) { return -ENODEV; }
+static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_validate_config(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size) { }
+
+/* protocol helpers */
+static inline int pnp_is_active(struct pnp_dev * dev) { return 0; }
+static inline int compare_pnp_id(struct pnp_id * pos, const char * id) { return -ENODEV; }
+static inline int pnp_add_id(struct pnp_id *id, struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_register_driver(struct pnp_driver *drv) { return -ENODEV; }
+static inline void pnp_unregister_driver(struct pnp_driver *drv) { ; }
+
+#endif /* CONFIG_PNP */
+
+
+#define pnp_err(format, arg...) printk(KERN_ERR "pnp: " format "\n" , ## arg)
+#define pnp_info(format, arg...) printk(KERN_INFO "pnp: " format "\n" , ## arg)
+#define pnp_warn(format, arg...) printk(KERN_WARNING "pnp: " format "\n" , ## arg)
+
+#ifdef DEBUG
+#define pnp_dbg(format, arg...) printk(KERN_DEBUG "pnp: " format "\n" , ## arg)
+#else
+#define pnp_dbg(format, arg...) do {} while (0)
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_PNP_H */
diff --git a/include/linux/pnpbios.h b/include/linux/pnpbios.h
new file mode 100644
index 000000000000..0a282ac1f6b2
--- /dev/null
+++ b/include/linux/pnpbios.h
@@ -0,0 +1,157 @@
+/*
+ * Include file for the interface to a PnP BIOS
+ *
+ * Original BIOS code (C) 1998 Christian Schmidt (chr.schmidt@tu-bs.de)
+ * PnP handler parts (c) 1998 Tom Lees <tom@lpsg.demon.co.uk>
+ * Minor reorganizations by David Hinds <dahinds@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_PNPBIOS_H
+#define _LINUX_PNPBIOS_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/pnp.h>
+
+/*
+ * Return codes
+ */
+#define PNP_SUCCESS                     0x00
+#define PNP_NOT_SET_STATICALLY          0x7f
+#define PNP_UNKNOWN_FUNCTION            0x81
+#define PNP_FUNCTION_NOT_SUPPORTED      0x82
+#define PNP_INVALID_HANDLE              0x83
+#define PNP_BAD_PARAMETER               0x84
+#define PNP_SET_FAILED                  0x85
+#define PNP_EVENTS_NOT_PENDING          0x86
+#define PNP_SYSTEM_NOT_DOCKED           0x87
+#define PNP_NO_ISA_PNP_CARDS            0x88
+#define PNP_UNABLE_TO_DETERMINE_DOCK_CAPABILITIES 0x89
+#define PNP_CONFIG_CHANGE_FAILED_NO_BATTERY 0x8a
+#define PNP_CONFIG_CHANGE_FAILED_RESOURCE_CONFLICT 0x8b
+#define PNP_BUFFER_TOO_SMALL            0x8c
+#define PNP_USE_ESCD_SUPPORT            0x8d
+#define PNP_MESSAGE_NOT_SUPPORTED       0x8e
+#define PNP_HARDWARE_ERROR              0x8f
+
+#define ESCD_SUCCESS                    0x00
+#define ESCD_IO_ERROR_READING           0x55
+#define ESCD_INVALID                    0x56
+#define ESCD_BUFFER_TOO_SMALL           0x59
+#define ESCD_NVRAM_TOO_SMALL            0x5a
+#define ESCD_FUNCTION_NOT_SUPPORTED     0x81
+
+/*
+ * Events that can be received by "get event"
+ */
+#define PNPEV_ABOUT_TO_CHANGE_CONFIG	0x0001
+#define PNPEV_DOCK_CHANGED		0x0002
+#define PNPEV_SYSTEM_DEVICE_CHANGED	0x0003
+#define PNPEV_CONFIG_CHANGED_FAILED	0x0004
+#define PNPEV_UNKNOWN_SYSTEM_EVENT	0xffff
+/* 0x8000 through 0xfffe are OEM defined */
+
+/*
+ * Messages that should be sent through "send message"
+ */
+#define PNPMSG_OK			0x00
+#define PNPMSG_ABORT			0x01
+#define PNPMSG_UNDOCK_DEFAULT_ACTION	0x40
+#define PNPMSG_POWER_OFF		0x41
+#define PNPMSG_PNP_OS_ACTIVE		0x42
+#define PNPMSG_PNP_OS_INACTIVE		0x43
+
+/*
+ * Plug and Play BIOS flags
+ */
+#define PNPBIOS_NO_DISABLE		0x0001
+#define PNPBIOS_NO_CONFIG		0x0002
+#define PNPBIOS_OUTPUT			0x0004
+#define PNPBIOS_INPUT			0x0008
+#define PNPBIOS_BOOTABLE		0x0010
+#define PNPBIOS_DOCK			0x0020
+#define PNPBIOS_REMOVABLE		0x0040
+#define pnpbios_is_static(x) (((x)->flags & 0x0100) == 0x0000)
+#define pnpbios_is_dynamic(x) ((x)->flags & 0x0080)
+
+/*
+ * Function Parameters
+ */
+#define PNPMODE_STATIC 1
+#define PNPMODE_DYNAMIC 0
+
+/* 0x8000 through 0xffff are OEM defined */
+
+#pragma pack(1)
+struct pnp_dev_node_info {
+	__u16	no_nodes;
+	__u16	max_node_size;
+};
+struct pnp_docking_station_info {
+	__u32	location_id;
+	__u32	serial;
+	__u16	capabilities;
+};
+struct pnp_isa_config_struc {
+	__u8	revision;
+	__u8	no_csns;
+	__u16	isa_rd_data_port;
+	__u16	reserved;
+};
+struct escd_info_struc {
+	__u16	min_escd_write_size;
+	__u16	escd_size;
+	__u32	nv_storage_base;
+};
+struct pnp_bios_node {
+	__u16	size;
+	__u8	handle;
+	__u32	eisa_id;
+	__u8	type_code[3];
+	__u16	flags;
+	__u8	data[0];
+};
+#pragma pack()
+
+#ifdef CONFIG_PNPBIOS
+
+/* non-exported */
+extern struct pnp_dev_node_info node_info;
+
+extern int pnp_bios_dev_node_info (struct pnp_dev_node_info *data);
+extern int pnp_bios_get_dev_node (u8 *nodenum, char config, struct pnp_bios_node *data);
+extern int pnp_bios_set_dev_node (u8 nodenum, char config, struct pnp_bios_node *data);
+extern int pnp_bios_get_stat_res (char *info);
+extern int pnp_bios_isapnp_config (struct pnp_isa_config_struc *data);
+extern int pnp_bios_escd_info (struct escd_info_struc *data);
+extern int pnp_bios_read_escd (char *data, u32 nvram_base);
+extern int pnp_bios_dock_station_info(struct pnp_docking_station_info *data);
+#define needed 0
+#if needed
+extern int pnp_bios_get_event (u16 *message);
+extern int pnp_bios_send_message (u16 message);
+extern int pnp_bios_set_stat_res (char *info);
+extern int pnp_bios_apm_id_table (char *table, u16 *size);
+extern int pnp_bios_write_escd (char *data, u32 nvram_base);
+#endif
+
+#endif /* CONFIG_PNPBIOS */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_PNPBIOS_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
new file mode 100644
index 000000000000..f6da702088f4
--- /dev/null
+++ b/include/linux/poll.h
@@ -0,0 +1,99 @@
+#ifndef _LINUX_POLL_H
+#define _LINUX_POLL_H
+
+#include <asm/poll.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/uaccess.h>
+
+struct poll_table_struct;
+
+/* 
+ * structures and helpers for f_op->poll implementations
+ */
+typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_table_struct *);
+
+typedef struct poll_table_struct {
+	poll_queue_proc qproc;
+} poll_table;
+
+static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
+{
+	if (p && wait_address)
+		p->qproc(filp, wait_address, p);
+}
+
+static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
+{
+	pt->qproc = qproc;
+}
+
+/*
+ * Structures and helpers for sys_poll/sys_poll
+ */
+struct poll_wqueues {
+	poll_table pt;
+	struct poll_table_page * table;
+	int error;
+};
+
+extern void poll_initwait(struct poll_wqueues *pwq);
+extern void poll_freewait(struct poll_wqueues *pwq);
+
+/*
+ * Scaleable version of the fd_set.
+ */
+
+typedef struct {
+	unsigned long *in, *out, *ex;
+	unsigned long *res_in, *res_out, *res_ex;
+} fd_set_bits;
+
+/*
+ * How many longwords for "nr" bits?
+ */
+#define FDS_BITPERLONG	(8*sizeof(long))
+#define FDS_LONGS(nr)	(((nr)+FDS_BITPERLONG-1)/FDS_BITPERLONG)
+#define FDS_BYTES(nr)	(FDS_LONGS(nr)*sizeof(long))
+
+/*
+ * We do a VERIFY_WRITE here even though we are only reading this time:
+ * we'll write to it eventually..
+ *
+ * Use "unsigned long" accesses to let user-mode fd_set's be long-aligned.
+ */
+static inline
+int get_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
+{
+	nr = FDS_BYTES(nr);
+	if (ufdset)
+		return copy_from_user(fdset, ufdset, nr) ? -EFAULT : 0;
+
+	memset(fdset, 0, nr);
+	return 0;
+}
+
+static inline unsigned long __must_check
+set_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
+{
+	if (ufdset)
+		return __copy_to_user(ufdset, fdset, FDS_BYTES(nr));
+	return 0;
+}
+
+static inline
+void zero_fd_set(unsigned long nr, unsigned long *fdset)
+{
+	memset(fdset, 0, FDS_BYTES(nr));
+}
+
+extern int do_select(int n, fd_set_bits *fds, long *timeout);
+
+#endif /* KERNEL */
+
+#endif /* _LINUX_POLL_H */
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
new file mode 100644
index 000000000000..f942e2bad8e3
--- /dev/null
+++ b/include/linux/posix-timers.h
@@ -0,0 +1,139 @@
+#ifndef _linux_POSIX_TIMERS_H
+#define _linux_POSIX_TIMERS_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+
+union cpu_time_count {
+	cputime_t cpu;
+	unsigned long long sched;
+};
+
+struct cpu_timer_list {
+	struct list_head entry;
+	union cpu_time_count expires, incr;
+	struct task_struct *task;
+	int firing;
+};
+
+#define CPUCLOCK_PID(clock)		((pid_t) ~((clock) >> 3))
+#define CPUCLOCK_PERTHREAD(clock) \
+	(((clock) & (clockid_t) CPUCLOCK_PERTHREAD_MASK) != 0)
+#define CPUCLOCK_PID_MASK	7
+#define CPUCLOCK_PERTHREAD_MASK	4
+#define CPUCLOCK_WHICH(clock)	((clock) & (clockid_t) CPUCLOCK_CLOCK_MASK)
+#define CPUCLOCK_CLOCK_MASK	3
+#define CPUCLOCK_PROF		0
+#define CPUCLOCK_VIRT		1
+#define CPUCLOCK_SCHED		2
+#define CPUCLOCK_MAX		3
+
+#define MAKE_PROCESS_CPUCLOCK(pid, clock) \
+	((~(clockid_t) (pid) << 3) | (clockid_t) (clock))
+#define MAKE_THREAD_CPUCLOCK(tid, clock) \
+	MAKE_PROCESS_CPUCLOCK((tid), (clock) | CPUCLOCK_PERTHREAD_MASK)
+
+/* POSIX.1b interval timer structure. */
+struct k_itimer {
+	struct list_head list;		/* free/ allocate list */
+	spinlock_t it_lock;
+	clockid_t it_clock;		/* which timer type */
+	timer_t it_id;			/* timer id */
+	int it_overrun;			/* overrun on pending signal  */
+	int it_overrun_last;		/* overrun on last delivered signal */
+	int it_requeue_pending;         /* waiting to requeue this timer */
+#define REQUEUE_PENDING 1
+	int it_sigev_notify;		/* notify word of sigevent struct */
+	int it_sigev_signo;		/* signo word of sigevent struct */
+	sigval_t it_sigev_value;	/* value word of sigevent struct */
+	struct task_struct *it_process;	/* process to send signal to */
+	struct sigqueue *sigq;		/* signal queue entry. */
+	union {
+		struct {
+			struct timer_list timer;
+			struct list_head abs_timer_entry; /* clock abs_timer_list */
+			struct timespec wall_to_prev;   /* wall_to_monotonic used when set */
+			unsigned long incr; /* interval in jiffies */
+		} real;
+		struct cpu_timer_list cpu;
+		struct {
+			unsigned int clock;
+			unsigned int node;
+			unsigned long incr;
+			unsigned long expires;
+		} mmtimer;
+	} it;
+};
+
+struct k_clock_abs {
+	struct list_head list;
+	spinlock_t lock;
+};
+struct k_clock {
+	int res;		/* in nano seconds */
+	int (*clock_getres) (clockid_t which_clock, struct timespec *tp);
+	struct k_clock_abs *abs_struct;
+	int (*clock_set) (clockid_t which_clock, struct timespec * tp);
+	int (*clock_get) (clockid_t which_clock, struct timespec * tp);
+	int (*timer_create) (struct k_itimer *timer);
+	int (*nsleep) (clockid_t which_clock, int flags, struct timespec *);
+	int (*timer_set) (struct k_itimer * timr, int flags,
+			  struct itimerspec * new_setting,
+			  struct itimerspec * old_setting);
+	int (*timer_del) (struct k_itimer * timr);
+#define TIMER_RETRY 1
+	void (*timer_get) (struct k_itimer * timr,
+			   struct itimerspec * cur_setting);
+};
+
+void register_posix_clock(clockid_t clock_id, struct k_clock *new_clock);
+
+/* Error handlers for timer_create, nanosleep and settime */
+int do_posix_clock_notimer_create(struct k_itimer *timer);
+int do_posix_clock_nonanosleep(clockid_t, int flags, struct timespec *);
+int do_posix_clock_nosettime(clockid_t, struct timespec *tp);
+
+/* function to call to trigger timer event */
+int posix_timer_event(struct k_itimer *timr, int si_private);
+
+struct now_struct {
+	unsigned long jiffies;
+};
+
+#define posix_get_now(now) (now)->jiffies = jiffies;
+#define posix_time_before(timer, now) \
+                      time_before((timer)->expires, (now)->jiffies)
+
+#define posix_bump_timer(timr, now)					\
+         do {								\
+              long delta, orun;						\
+	      delta = now.jiffies - (timr)->it.real.timer.expires;	\
+              if (delta >= 0) {						\
+	           orun = 1 + (delta / (timr)->it.real.incr);		\
+	          (timr)->it.real.timer.expires +=			\
+			 orun * (timr)->it.real.incr;			\
+                  (timr)->it_overrun += orun;				\
+              }								\
+            }while (0)
+
+int posix_cpu_clock_getres(clockid_t which_clock, struct timespec *);
+int posix_cpu_clock_get(clockid_t which_clock, struct timespec *);
+int posix_cpu_clock_set(clockid_t which_clock, const struct timespec *tp);
+int posix_cpu_timer_create(struct k_itimer *);
+int posix_cpu_nsleep(clockid_t, int, struct timespec *);
+int posix_cpu_timer_set(struct k_itimer *, int,
+			struct itimerspec *, struct itimerspec *);
+int posix_cpu_timer_del(struct k_itimer *);
+void posix_cpu_timer_get(struct k_itimer *, struct itimerspec *);
+
+void posix_cpu_timer_schedule(struct k_itimer *);
+
+void run_posix_cpu_timers(struct task_struct *);
+void posix_cpu_timers_exit(struct task_struct *);
+void posix_cpu_timers_exit_group(struct task_struct *);
+
+void set_process_cpu_timer(struct task_struct *, unsigned int,
+			   cputime_t *, cputime_t *);
+
+#endif
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
new file mode 100644
index 000000000000..4caedddaa033
--- /dev/null
+++ b/include/linux/posix_acl.h
@@ -0,0 +1,86 @@
+/*
+  File: linux/posix_acl.h
+
+  (C) 2002 Andreas Gruenbacher, <a.gruenbacher@computer.org>
+*/
+
+
+#ifndef __LINUX_POSIX_ACL_H
+#define __LINUX_POSIX_ACL_H
+
+#include <linux/slab.h>
+
+#define ACL_UNDEFINED_ID	(-1)
+
+/* a_type field in acl_user_posix_entry_t */
+#define ACL_TYPE_ACCESS		(0x8000)
+#define ACL_TYPE_DEFAULT	(0x4000)
+
+/* e_tag entry in struct posix_acl_entry */
+#define ACL_USER_OBJ		(0x01)
+#define ACL_USER		(0x02)
+#define ACL_GROUP_OBJ		(0x04)
+#define ACL_GROUP		(0x08)
+#define ACL_MASK		(0x10)
+#define ACL_OTHER		(0x20)
+
+/* permissions in the e_perm field */
+#define ACL_READ		(0x04)
+#define ACL_WRITE		(0x02)
+#define ACL_EXECUTE		(0x01)
+//#define ACL_ADD		(0x08)
+//#define ACL_DELETE		(0x10)
+
+struct posix_acl_entry {
+	short			e_tag;
+	unsigned short		e_perm;
+	unsigned int		e_id;
+};
+
+struct posix_acl {
+	atomic_t		a_refcount;
+	unsigned int		a_count;
+	struct posix_acl_entry	a_entries[0];
+};
+
+#define FOREACH_ACL_ENTRY(pa, acl, pe) \
+	for(pa=(acl)->a_entries, pe=pa+(acl)->a_count; pa<pe; pa++)
+
+
+/*
+ * Duplicate an ACL handle.
+ */
+static inline struct posix_acl *
+posix_acl_dup(struct posix_acl *acl)
+{
+	if (acl)
+		atomic_inc(&acl->a_refcount);
+	return acl;
+}
+
+/*
+ * Free an ACL handle.
+ */
+static inline void
+posix_acl_release(struct posix_acl *acl)
+{
+	if (acl && atomic_dec_and_test(&acl->a_refcount))
+		kfree(acl);
+}
+
+
+/* posix_acl.c */
+
+extern struct posix_acl *posix_acl_alloc(int, unsigned int __nocast);
+extern struct posix_acl *posix_acl_clone(const struct posix_acl *, unsigned int __nocast);
+extern int posix_acl_valid(const struct posix_acl *);
+extern int posix_acl_permission(struct inode *, const struct posix_acl *, int);
+extern struct posix_acl *posix_acl_from_mode(mode_t, unsigned int __nocast);
+extern int posix_acl_equiv_mode(const struct posix_acl *, mode_t *);
+extern int posix_acl_create_masq(struct posix_acl *, mode_t *);
+extern int posix_acl_chmod_masq(struct posix_acl *, mode_t);
+
+extern struct posix_acl *get_posix_acl(struct inode *, int);
+extern int set_posix_acl(struct inode *, int, struct posix_acl *);
+
+#endif  /* __LINUX_POSIX_ACL_H */
diff --git a/include/linux/posix_acl_xattr.h b/include/linux/posix_acl_xattr.h
new file mode 100644
index 000000000000..5efd0a6dad94
--- /dev/null
+++ b/include/linux/posix_acl_xattr.h
@@ -0,0 +1,55 @@
+/*
+  File: linux/posix_acl_xattr.h
+
+  Extended attribute system call representation of Access Control Lists.
+
+  Copyright (C) 2000 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (C) 2002 SGI - Silicon Graphics, Inc <linux-xfs@oss.sgi.com>
+ */
+#ifndef _POSIX_ACL_XATTR_H
+#define _POSIX_ACL_XATTR_H
+
+#include <linux/posix_acl.h>
+
+/* Extended attribute names */
+#define POSIX_ACL_XATTR_ACCESS	"system.posix_acl_access"
+#define POSIX_ACL_XATTR_DEFAULT	"system.posix_acl_default"
+
+/* Supported ACL a_version fields */
+#define POSIX_ACL_XATTR_VERSION	0x0002
+
+
+/* An undefined entry e_id value */
+#define ACL_UNDEFINED_ID	(-1)
+
+typedef struct {
+	__u16			e_tag;
+	__u16			e_perm;
+	__u32			e_id;
+} posix_acl_xattr_entry;
+
+typedef struct {
+	__u32			a_version;
+	posix_acl_xattr_entry	a_entries[0];
+} posix_acl_xattr_header;
+
+
+static inline size_t
+posix_acl_xattr_size(int count)
+{
+	return (sizeof(posix_acl_xattr_header) +
+		(count * sizeof(posix_acl_xattr_entry)));
+}
+
+static inline int
+posix_acl_xattr_count(size_t size)
+{
+	if (size < sizeof(posix_acl_xattr_header))
+		return -1;
+	size -= sizeof(posix_acl_xattr_header);
+	if (size % sizeof(posix_acl_xattr_entry))
+		return -1;
+	return size / sizeof(posix_acl_xattr_entry);
+}
+
+#endif	/* _POSIX_ACL_XATTR_H */
diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h
new file mode 100644
index 000000000000..f04c98cf44f3
--- /dev/null
+++ b/include/linux/posix_types.h
@@ -0,0 +1,49 @@
+#ifndef _LINUX_POSIX_TYPES_H
+#define _LINUX_POSIX_TYPES_H
+
+#include <linux/stddef.h>
+
+/*
+ * This allows for 1024 file descriptors: if NR_OPEN is ever grown
+ * beyond that you'll have to change this too. But 1024 fd's seem to be
+ * enough even for such "real" unices like OSF/1, so hopefully this is
+ * one limit that doesn't have to be changed [again].
+ *
+ * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
+ * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
+ * place for them. Solved by having dummy defines in <sys/time.h>.
+ */
+
+/*
+ * Those macros may have been defined in <gnu/types.h>. But we always
+ * use the ones here. 
+ */
+#undef __NFDBITS
+#define __NFDBITS	(8 * sizeof(unsigned long))
+
+#undef __FD_SETSIZE
+#define __FD_SETSIZE	1024
+
+#undef __FDSET_LONGS
+#define __FDSET_LONGS	(__FD_SETSIZE/__NFDBITS)
+
+#undef __FDELT
+#define	__FDELT(d)	((d) / __NFDBITS)
+
+#undef __FDMASK
+#define	__FDMASK(d)	(1UL << ((d) % __NFDBITS))
+
+typedef struct {
+	unsigned long fds_bits [__FDSET_LONGS];
+} __kernel_fd_set;
+
+/* Type of a signal handler.  */
+typedef void (*__kernel_sighandler_t)(int);
+
+/* Type of a SYSV IPC key.  */
+typedef int __kernel_key_t;
+typedef int __kernel_mqd_t;
+
+#include <asm/posix_types.h>
+
+#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h
new file mode 100644
index 000000000000..141c96586824
--- /dev/null
+++ b/include/linux/ppdev.h
@@ -0,0 +1,101 @@
+/*
+ * linux/drivers/char/ppdev.h
+ *
+ * User-space parallel port device driver (header file).
+ *
+ * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
+ * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
+ */
+
+#define PP_MAJOR	99
+
+#define PP_IOCTL	'p'
+
+/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
+#define PPSETMODE	_IOW(PP_IOCTL, 0x80, int)
+
+/* Read status */
+#define PPRSTATUS	_IOR(PP_IOCTL, 0x81, unsigned char)
+#define PPWSTATUS	OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
+
+/* Read/write control */
+#define PPRCONTROL	_IOR(PP_IOCTL, 0x83, unsigned char)
+#define PPWCONTROL	_IOW(PP_IOCTL, 0x84, unsigned char)
+
+struct ppdev_frob_struct {
+	unsigned char mask;
+	unsigned char val;
+};
+#define PPFCONTROL      _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
+
+/* Read/write data */
+#define PPRDATA		_IOR(PP_IOCTL, 0x85, unsigned char)
+#define PPWDATA		_IOW(PP_IOCTL, 0x86, unsigned char)
+
+/* Read/write econtrol (not used) */
+#define PPRECONTROL	OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
+#define PPWECONTROL	OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
+
+/* Read/write FIFO (not used) */
+#define PPRFIFO		OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
+#define PPWFIFO		OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
+
+/* Claim the port to start using it */
+#define PPCLAIM		_IO(PP_IOCTL, 0x8b)
+
+/* Release the port when you aren't using it */
+#define PPRELEASE	_IO(PP_IOCTL, 0x8c)
+
+/* Yield the port (release it if another driver is waiting,
+ * then reclaim) */
+#define PPYIELD		_IO(PP_IOCTL, 0x8d)
+
+/* Register device exclusively (must be before PPCLAIM). */
+#define PPEXCL		_IO(PP_IOCTL, 0x8f)
+
+/* Data line direction: non-zero for input mode. */
+#define PPDATADIR	_IOW(PP_IOCTL, 0x90, int)
+
+/* Negotiate a particular IEEE 1284 mode. */
+#define PPNEGOT		_IOW(PP_IOCTL, 0x91, int)
+
+/* Set control lines when an interrupt occurs. */
+#define PPWCTLONIRQ	_IOW(PP_IOCTL, 0x92, unsigned char)
+
+/* Clear (and return) interrupt count. */
+#define PPCLRIRQ	_IOR(PP_IOCTL, 0x93, int)
+
+/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
+#define PPSETPHASE	_IOW(PP_IOCTL, 0x94, int)
+
+/* Set and get port timeout (struct timeval's) */
+#define PPGETTIME	_IOR(PP_IOCTL, 0x95, struct timeval)
+#define PPSETTIME	_IOW(PP_IOCTL, 0x96, struct timeval)
+
+/* Get available modes (what the hardware can do) */
+#define PPGETMODES	_IOR(PP_IOCTL, 0x97, unsigned int)
+
+/* Get the current mode and phaze */
+#define PPGETMODE	_IOR(PP_IOCTL, 0x98, int)
+#define PPGETPHASE	_IOR(PP_IOCTL, 0x99, int)
+
+/* get/set flags */
+#define PPGETFLAGS	_IOR(PP_IOCTL, 0x9a, int)
+#define PPSETFLAGS	_IOW(PP_IOCTL, 0x9b, int)
+
+/* flags visible to the world */
+#define PP_FASTWRITE	(1<<2)
+#define PP_FASTREAD	(1<<3)
+#define PP_W91284PIC	(1<<4)
+
+/* only masks user-visible flags */
+#define PP_FLAGMASK	(PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
+
+
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
new file mode 100644
index 000000000000..7227e653b3be
--- /dev/null
+++ b/include/linux/ppp-comp.h
@@ -0,0 +1,207 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright (c) 1994 The Australian National University.
+ * All rights reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, provided that the above copyright
+ * notice appears in all copies.  This software is provided without any
+ * warranty, express or implied. The Australian National University
+ * makes no representations about the suitability of this software for
+ * any purpose.
+ *
+ * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
+ * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
+ * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
+ * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
+ * OR MODIFICATIONS.
+ *
+ * $Id: ppp-comp.h,v 1.6 1997/11/27 06:04:44 paulus Exp $
+ */
+
+/*
+ *  ==FILEVERSION 980319==
+ *
+ *  NOTE TO MAINTAINERS:
+ *     If you modify this file at all, please set the above date.
+ *     ppp-comp.h is shipped with a PPP distribution as well as with the kernel;
+ *     if everyone increases the FILEVERSION number above, then scripts
+ *     can do the right thing when deciding whether to install a new ppp-comp.h
+ *     file.  Don't change the format of that line otherwise, so the
+ *     installation script can recognize it.
+ */
+
+#ifndef _NET_PPP_COMP_H
+#define _NET_PPP_COMP_H
+
+struct module;
+
+/*
+ * The following symbols control whether we include code for
+ * various compression methods.
+ */
+
+#ifndef DO_BSD_COMPRESS
+#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
+#endif
+#ifndef DO_DEFLATE
+#define DO_DEFLATE	1	/* by default, include Deflate */
+#endif
+#define DO_PREDICTOR_1	0
+#define DO_PREDICTOR_2	0
+
+/*
+ * Structure giving methods for compression/decompression.
+ */
+
+struct compressor {
+	int	compress_proto;	/* CCP compression protocol number */
+
+	/* Allocate space for a compressor (transmit side) */
+	void	*(*comp_alloc) (unsigned char *options, int opt_len);
+
+	/* Free space used by a compressor */
+	void	(*comp_free) (void *state);
+
+	/* Initialize a compressor */
+	int	(*comp_init) (void *state, unsigned char *options,
+			      int opt_len, int unit, int opthdr, int debug);
+
+	/* Reset a compressor */
+	void	(*comp_reset) (void *state);
+
+	/* Compress a packet */
+	int     (*compress) (void *state, unsigned char *rptr,
+			      unsigned char *obuf, int isize, int osize);
+
+	/* Return compression statistics */
+	void	(*comp_stat) (void *state, struct compstat *stats);
+
+	/* Allocate space for a decompressor (receive side) */
+	void	*(*decomp_alloc) (unsigned char *options, int opt_len);
+
+	/* Free space used by a decompressor */
+	void	(*decomp_free) (void *state);
+
+	/* Initialize a decompressor */
+	int	(*decomp_init) (void *state, unsigned char *options,
+				int opt_len, int unit, int opthdr, int mru,
+				int debug);
+
+	/* Reset a decompressor */
+	void	(*decomp_reset) (void *state);
+
+	/* Decompress a packet. */
+	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
+				unsigned char *obuf, int osize);
+
+	/* Update state for an incompressible packet received */
+	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
+
+	/* Return decompression statistics */
+	void	(*decomp_stat) (void *state, struct compstat *stats);
+
+	/* Used in locking compressor modules */
+	struct module *owner;
+};
+
+/*
+ * The return value from decompress routine is the length of the
+ * decompressed packet if successful, otherwise DECOMP_ERROR
+ * or DECOMP_FATALERROR if an error occurred.
+ * 
+ * We need to make this distinction so that we can disable certain
+ * useful functionality, namely sending a CCP reset-request as a result
+ * of an error detected after decompression.  This is to avoid infringing
+ * a patent held by Motorola.
+ * Don't you just lurve software patents.
+ */
+
+#define DECOMP_ERROR		-1	/* error detected before decomp. */
+#define DECOMP_FATALERROR	-2	/* error detected after decomp. */
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ	1
+#define CCP_CONFACK	2
+#define CCP_TERMREQ	5
+#define CCP_TERMACK	6
+#define CCP_RESETREQ	14
+#define CCP_RESETACK	15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH	32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp)		((dp)[0])
+#define CCP_ID(dp)		((dp)[1])
+#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN		4
+
+#define CCP_OPT_CODE(dp)	((dp)[0])
+#define CCP_OPT_LENGTH(dp)	((dp)[1])
+#define CCP_OPT_MINLEN		2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS	3	/* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
+#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
+#define BSD_CURRENT_VERSION	1		/* current version number */
+#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
+
+#define BSD_MIN_BITS		9	/* smallest code size supported */
+#define BSD_MAX_BITS		15	/* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE		26	/* config option for Deflate */
+#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
+#define CILEN_DEFLATE		4	/* length of its config option */
+
+#define DEFLATE_MIN_SIZE	9
+#define DEFLATE_MAX_SIZE	15
+#define DEFLATE_METHOD_VAL	8
+#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
+#define DEFLATE_METHOD(x)	((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE	0
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1	2	/* length of its config option */
+#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2	2	/* length of its config option */
+
+#ifdef __KERNEL__
+extern int ppp_register_compressor(struct compressor *);
+extern void ppp_unregister_compressor(struct compressor *);
+#endif /* __KERNEL__ */
+
+#endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp_channel.h b/include/linux/ppp_channel.h
new file mode 100644
index 000000000000..a942892d6dfe
--- /dev/null
+++ b/include/linux/ppp_channel.h
@@ -0,0 +1,81 @@
+#ifndef _PPP_CHANNEL_H_
+#define _PPP_CHANNEL_H_
+/*
+ * Definitions for the interface between the generic PPP code
+ * and a PPP channel.
+ *
+ * A PPP channel provides a way for the generic PPP code to send
+ * and receive packets over some sort of communications medium.
+ * Packets are stored in sk_buffs and have the 2-byte PPP protocol
+ * number at the start, but not the address and control bytes.
+ *
+ * Copyright 1999 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ * ==FILEVERSION 20000322==
+ */
+
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/poll.h>
+
+struct ppp_channel;
+
+struct ppp_channel_ops {
+	/* Send a packet (or multilink fragment) on this channel.
+	   Returns 1 if it was accepted, 0 if not. */
+	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
+	/* Handle an ioctl call that has come in via /dev/ppp. */
+	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
+};
+
+struct ppp_channel {
+	void		*private;	/* channel private data */
+	struct ppp_channel_ops *ops;	/* operations for this channel */
+	int		mtu;		/* max transmit packet size */
+	int		hdrlen;		/* amount of headroom channel needs */
+	void		*ppp;		/* opaque to channel */
+	/* the following are not used at present */
+	int		speed;		/* transfer rate (bytes/second) */
+	int		latency;	/* overhead time in milliseconds */
+};
+
+#ifdef __KERNEL__
+/* Called by the channel when it can send some more data. */
+extern void ppp_output_wakeup(struct ppp_channel *);
+
+/* Called by the channel to process a received PPP packet.
+   The packet should have just the 2-byte PPP protocol header. */
+extern void ppp_input(struct ppp_channel *, struct sk_buff *);
+
+/* Called by the channel when an input error occurs, indicating
+   that we may have missed a packet. */
+extern void ppp_input_error(struct ppp_channel *, int code);
+
+/* Attach a channel to a given PPP unit. */
+extern int ppp_register_channel(struct ppp_channel *);
+
+/* Detach a channel from its PPP unit (e.g. on hangup). */
+extern void ppp_unregister_channel(struct ppp_channel *);
+
+/* Get the channel number for a channel */
+extern int ppp_channel_index(struct ppp_channel *);
+
+/* Get the unit number associated with a channel, or -1 if none */
+extern int ppp_unit_number(struct ppp_channel *);
+
+/*
+ * SMP locking notes:
+ * The channel code must ensure that when it calls ppp_unregister_channel,
+ * nothing is executing in any of the procedures above, for that
+ * channel.  The generic layer will ensure that nothing is executing
+ * in the start_xmit and ioctl routines for the channel by the time
+ * that ppp_unregister_channel returns.
+ */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
new file mode 100644
index 000000000000..402056cd049d
--- /dev/null
+++ b/include/linux/ppp_defs.h
@@ -0,0 +1,190 @@
+/*	$Id: ppp_defs.h,v 1.2 1994/09/21 01:31:06 paulus Exp $	*/
+
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright (c) 1994 The Australian National University.
+ * All rights reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, provided that the above copyright
+ * notice appears in all copies.  This software is provided without any
+ * warranty, express or implied. The Australian National University
+ * makes no representations about the suitability of this software for
+ * any purpose.
+ *
+ * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
+ * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
+ * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
+ * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
+ * OR MODIFICATIONS.
+ */
+
+/*
+ *  ==FILEVERSION 20000114==
+ *
+ *  NOTE TO MAINTAINERS:
+ *     If you modify this file at all, please set the above date.
+ *     ppp_defs.h is shipped with a PPP distribution as well as with the kernel;
+ *     if everyone increases the FILEVERSION number above, then scripts
+ *     can do the right thing when deciding whether to install a new ppp_defs.h
+ *     file.  Don't change the format of that line otherwise, so the
+ *     installation script can recognize it.
+ */
+
+#ifndef _PPP_DEFS_H_
+#define _PPP_DEFS_H_
+
+#include <linux/crc-ccitt.h>
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN	4	/* octets for standard ppp header */
+#define PPP_FCSLEN	2	/* octets for FCS */
+#define PPP_MRU		1500	/* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
+#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
+#define	PPP_UI		0x03	/* Unnumbered Information */
+#define	PPP_FLAG	0x7e	/* Flag Sequence */
+#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
+#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP		0x21	/* Internet Protocol */
+#define PPP_AT		0x29	/* AppleTalk Protocol */
+#define PPP_IPX		0x2b	/* IPX protocol */
+#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
+#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
+#define PPP_MP		0x3d	/* Multilink protocol */
+#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
+#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
+#define PPP_COMP	0xfd	/* compressed packet */
+#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP	0x8021	/* IP Control Protocol */
+#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
+#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
+#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
+#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
+#define PPP_CCP		0x80fd	/* Compression Control Protocol */
+#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
+#define PPP_LCP		0xc021	/* Link Control Protocol */
+#define PPP_PAP		0xc023	/* Password Authentication Protocol */
+#define PPP_LQR		0xc025	/* Link Quality Report protocol */
+#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP	0xc029	/* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS	0xffff	/* Initial FCS value */
+#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
+#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32		ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+    NPMODE_PASS,		/* pass the packet through */
+    NPMODE_DROP,		/* silently drop the packet */
+    NPMODE_ERROR,		/* return an error */
+    NPMODE_QUEUE		/* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat	{
+    __u32	ppp_discards;	/* # frames discarded */
+
+    __u32	ppp_ibytes;	/* bytes received */
+    __u32	ppp_ioctects;	/* bytes received not in error */
+    __u32	ppp_ipackets;	/* packets received */
+    __u32	ppp_ierrors;	/* receive errors */
+    __u32	ppp_ilqrs;	/* # LQR frames received */
+
+    __u32	ppp_obytes;	/* raw bytes sent */
+    __u32	ppp_ooctects;	/* frame bytes sent */
+    __u32	ppp_opackets;	/* packets sent */
+    __u32	ppp_oerrors;	/* transmit errors */ 
+    __u32	ppp_olqrs;	/* # LQR frames sent */
+};
+
+struct vjstat {
+    __u32	vjs_packets;	/* outbound packets */
+    __u32	vjs_compressed;	/* outbound compressed packets */
+    __u32	vjs_searches;	/* searches for connection state */
+    __u32	vjs_misses;	/* times couldn't find conn. state */
+    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
+    __u32	vjs_compressedin;   /* inbound compressed packets */
+    __u32	vjs_errorin;	/* inbound unknown type packets */
+    __u32	vjs_tossed;	/* inbound packets tossed because of error */
+};
+
+struct compstat {
+    __u32	unc_bytes;	/* total uncompressed bytes */
+    __u32	unc_packets;	/* total uncompressed packets */
+    __u32	comp_bytes;	/* compressed bytes */
+    __u32	comp_packets;	/* compressed packets */
+    __u32	inc_bytes;	/* incompressible bytes */
+    __u32	inc_packets;	/* incompressible packets */
+
+    /* the compression ratio is defined as in_count / bytes_out */
+    __u32       in_count;	/* Bytes received */
+    __u32       bytes_out;	/* Bytes transmitted */
+
+    double	ratio;		/* not computed in kernel. */
+};
+
+struct ppp_stats {
+    struct pppstat	p;	/* basic PPP statistics */
+    struct vjstat	vj;	/* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+    struct compstat	c;	/* packet compression statistics */
+    struct compstat	d;	/* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+    time_t xmit_idle;		/* time since last NP packet sent */
+    time_t recv_idle;		/* time since last NP packet received */
+};
+
+#ifndef __P
+#ifdef __STDC__
+#define __P(x)	x
+#else
+#define __P(x)	()
+#endif
+#endif
+
+#endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
new file mode 100644
index 000000000000..bf022c43a18e
--- /dev/null
+++ b/include/linux/prctl.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
+#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE   3
+#define PR_SET_DUMPABLE   4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN	  5
+#define PR_SET_UNALIGN	  6
+# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from uid 0 */
+#define PR_GET_KEEPCAPS   7
+#define PR_SET_KEEPCAPS   8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU  9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC	11
+#define PR_SET_FPEXC	12
+# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
+# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
+# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
+# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
+# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
+# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING   13
+#define PR_SET_TIMING   14
+# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
+                                                   statistical process timing */
+# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
+                                                   process timing */
+
+#define PR_SET_NAME    15		/* Set process name */
+#define PR_GET_NAME    16		/* Get process name */
+
+#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
new file mode 100644
index 000000000000..dd98c54a23b4
--- /dev/null
+++ b/include/linux/preempt.h
@@ -0,0 +1,62 @@
+#ifndef __LINUX_PREEMPT_H
+#define __LINUX_PREEMPT_H
+
+/*
+ * include/linux/preempt.h - macros for accessing and manipulating
+ * preempt_count (used for kernel preemption, interrupt count, etc.)
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+
+#ifdef CONFIG_DEBUG_PREEMPT
+  extern void fastcall add_preempt_count(int val);
+  extern void fastcall sub_preempt_count(int val);
+#else
+# define add_preempt_count(val)	do { preempt_count() += (val); } while (0)
+# define sub_preempt_count(val)	do { preempt_count() -= (val); } while (0)
+#endif
+
+#define inc_preempt_count() add_preempt_count(1)
+#define dec_preempt_count() sub_preempt_count(1)
+
+#define preempt_count()	(current_thread_info()->preempt_count)
+
+#ifdef CONFIG_PREEMPT
+
+asmlinkage void preempt_schedule(void);
+
+#define preempt_disable() \
+do { \
+	inc_preempt_count(); \
+	barrier(); \
+} while (0)
+
+#define preempt_enable_no_resched() \
+do { \
+	barrier(); \
+	dec_preempt_count(); \
+} while (0)
+
+#define preempt_check_resched() \
+do { \
+	if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
+		preempt_schedule(); \
+} while (0)
+
+#define preempt_enable() \
+do { \
+	preempt_enable_no_resched(); \
+	preempt_check_resched(); \
+} while (0)
+
+#else
+
+#define preempt_disable()		do { } while (0)
+#define preempt_enable_no_resched()	do { } while (0)
+#define preempt_enable()		do { } while (0)
+#define preempt_check_resched()		do { } while (0)
+
+#endif
+
+#endif /* __LINUX_PREEMPT_H */
diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h
new file mode 100644
index 000000000000..fc86f274147f
--- /dev/null
+++ b/include/linux/prefetch.h
@@ -0,0 +1,69 @@
+/*
+ *  Generic cache management functions. Everything is arch-specific,  
+ *  but this header exists to make sure the defines/functions can be
+ *  used in a generic way.
+ *
+ *  2000-11-13  Arjan van de Ven   <arjan@fenrus.demon.nl>
+ *
+ */
+
+#ifndef _LINUX_PREFETCH_H
+#define _LINUX_PREFETCH_H
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+/*
+	prefetch(x) attempts to pre-emptively get the memory pointed to
+	by address "x" into the CPU L1 cache. 
+	prefetch(x) should not cause any kind of exception, prefetch(0) is
+	specifically ok.
+
+	prefetch() should be defined by the architecture, if not, the 
+	#define below provides a no-op define.	
+	
+	There are 3 prefetch() macros:
+	
+	prefetch(x)  	- prefetches the cacheline at "x" for read
+	prefetchw(x)	- prefetches the cacheline at "x" for write
+	spin_lock_prefetch(x) - prefectches the spinlock *x for taking
+	
+	there is also PREFETCH_STRIDE which is the architecure-prefered 
+	"lookahead" size for prefetching streamed operations.
+	
+*/
+
+/*
+ *	These cannot be do{}while(0) macros. See the mental gymnastics in
+ *	the loop macro.
+ */
+ 
+#ifndef ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x) {;}
+#endif
+
+#ifndef ARCH_HAS_PREFETCHW
+static inline void prefetchw(const void *x) {;}
+#endif
+
+#ifndef ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) prefetchw(x)
+#endif
+
+#ifndef PREFETCH_STRIDE
+#define PREFETCH_STRIDE (4*L1_CACHE_BYTES)
+#endif
+
+static inline void prefetch_range(void *addr, size_t len)
+{
+#ifdef ARCH_HAS_PREFETCH
+	char *cp;
+	char *end = addr + len;
+
+	for (cp = addr; cp < end; cp += PREFETCH_STRIDE)
+		prefetch(cp);
+#endif
+}
+
+#endif
diff --git a/include/linux/prio_tree.h b/include/linux/prio_tree.h
new file mode 100644
index 000000000000..db04abb557e0
--- /dev/null
+++ b/include/linux/prio_tree.h
@@ -0,0 +1,120 @@
+#ifndef _LINUX_PRIO_TREE_H
+#define _LINUX_PRIO_TREE_H
+
+/*
+ * K&R 2nd ed. A8.3 somewhat obliquely hints that initial sequences of struct
+ * fields with identical types should end up at the same location. We'll use
+ * this until we can scrap struct raw_prio_tree_node.
+ *
+ * Note: all this could be done more elegantly by using unnamed union/struct
+ * fields. However, gcc 2.95.3 and apparently also gcc 3.0.4 don't support this
+ * language extension.
+ */
+
+struct raw_prio_tree_node {
+	struct prio_tree_node	*left;
+	struct prio_tree_node	*right;
+	struct prio_tree_node	*parent;
+};
+
+struct prio_tree_node {
+	struct prio_tree_node	*left;
+	struct prio_tree_node	*right;
+	struct prio_tree_node	*parent;
+	unsigned long		start;
+	unsigned long		last;	/* last location _in_ interval */
+};
+
+struct prio_tree_root {
+	struct prio_tree_node	*prio_tree_node;
+	unsigned short 		index_bits;
+	unsigned short		raw;
+		/*
+		 * 0: nodes are of type struct prio_tree_node
+		 * 1: nodes are of type raw_prio_tree_node
+		 */
+};
+
+struct prio_tree_iter {
+	struct prio_tree_node	*cur;
+	unsigned long		mask;
+	unsigned long		value;
+	int			size_level;
+
+	struct prio_tree_root	*root;
+	pgoff_t			r_index;
+	pgoff_t			h_index;
+};
+
+static inline void prio_tree_iter_init(struct prio_tree_iter *iter,
+		struct prio_tree_root *root, pgoff_t r_index, pgoff_t h_index)
+{
+	iter->root = root;
+	iter->r_index = r_index;
+	iter->h_index = h_index;
+	iter->cur = NULL;
+}
+
+#define __INIT_PRIO_TREE_ROOT(ptr, _raw)	\
+do {					\
+	(ptr)->prio_tree_node = NULL;	\
+	(ptr)->index_bits = 1;		\
+	(ptr)->raw = (_raw);		\
+} while (0)
+
+#define INIT_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 0)
+#define INIT_RAW_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 1)
+
+#define INIT_PRIO_TREE_NODE(ptr)				\
+do {								\
+	(ptr)->left = (ptr)->right = (ptr)->parent = (ptr);	\
+} while (0)
+
+#define INIT_PRIO_TREE_ITER(ptr)	\
+do {					\
+	(ptr)->cur = NULL;		\
+	(ptr)->mask = 0UL;		\
+	(ptr)->value = 0UL;		\
+	(ptr)->size_level = 0;		\
+} while (0)
+
+#define prio_tree_entry(ptr, type, member) \
+       ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+
+static inline int prio_tree_empty(const struct prio_tree_root *root)
+{
+	return root->prio_tree_node == NULL;
+}
+
+static inline int prio_tree_root(const struct prio_tree_node *node)
+{
+	return node->parent == node;
+}
+
+static inline int prio_tree_left_empty(const struct prio_tree_node *node)
+{
+	return node->left == node;
+}
+
+static inline int prio_tree_right_empty(const struct prio_tree_node *node)
+{
+	return node->right == node;
+}
+
+
+struct prio_tree_node *prio_tree_replace(struct prio_tree_root *root,
+                struct prio_tree_node *old, struct prio_tree_node *node);
+struct prio_tree_node *prio_tree_insert(struct prio_tree_root *root,
+                struct prio_tree_node *node);
+void prio_tree_remove(struct prio_tree_root *root, struct prio_tree_node *node);
+struct prio_tree_node *prio_tree_next(struct prio_tree_iter *iter);
+
+#define raw_prio_tree_replace(root, old, node) \
+	prio_tree_replace(root, (struct prio_tree_node *) (old), \
+	    (struct prio_tree_node *) (node))
+#define raw_prio_tree_insert(root, node) \
+	prio_tree_insert(root, (struct prio_tree_node *) (node))
+#define raw_prio_tree_remove(root, node) \
+	prio_tree_remove(root, (struct prio_tree_node *) (node))
+
+#endif /* _LINUX_PRIO_TREE_H */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
new file mode 100644
index 000000000000..59e505261fd6
--- /dev/null
+++ b/include/linux/proc_fs.h
@@ -0,0 +1,259 @@
+#ifndef _LINUX_PROC_FS_H
+#define _LINUX_PROC_FS_H
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <asm/atomic.h>
+
+/*
+ * The proc filesystem constants/structures
+ */
+
+/*
+ * Offset of the first process in the /proc root directory..
+ */
+#define FIRST_PROCESS_ENTRY 256
+
+
+/*
+ * We always define these enumerators
+ */
+
+enum {
+	PROC_ROOT_INO = 1,
+};
+
+#define PROC_SUPER_MAGIC 0x9fa0
+
+/*
+ * This is not completely implemented yet. The idea is to
+ * create an in-memory tree (like the actual /proc filesystem
+ * tree) of these proc_dir_entries, so that we can dynamically
+ * add new files to /proc.
+ *
+ * The "next" pointer creates a linked list of one /proc directory,
+ * while parent/subdir create the directory structure (every
+ * /proc file has a parent, but "subdir" is NULL for all
+ * non-directory entries).
+ *
+ * "get_info" is called at "read", while "owner" is used to protect module
+ * from unloading while proc_dir_entry is in use
+ */
+
+typedef	int (read_proc_t)(char *page, char **start, off_t off,
+			  int count, int *eof, void *data);
+typedef	int (write_proc_t)(struct file *file, const char __user *buffer,
+			   unsigned long count, void *data);
+typedef int (get_info_t)(char *, char **, off_t, int);
+
+struct proc_dir_entry {
+	unsigned int low_ino;
+	unsigned short namelen;
+	const char *name;
+	mode_t mode;
+	nlink_t nlink;
+	uid_t uid;
+	gid_t gid;
+	unsigned long size;
+	struct inode_operations * proc_iops;
+	struct file_operations * proc_fops;
+	get_info_t *get_info;
+	struct module *owner;
+	struct proc_dir_entry *next, *parent, *subdir;
+	void *data;
+	read_proc_t *read_proc;
+	write_proc_t *write_proc;
+	atomic_t count;		/* use count */
+	int deleted;		/* delete flag */
+};
+
+struct kcore_list {
+	struct kcore_list *next;
+	unsigned long addr;
+	size_t size;
+};
+
+#ifdef CONFIG_PROC_FS
+
+extern struct proc_dir_entry proc_root;
+extern struct proc_dir_entry *proc_root_fs;
+extern struct proc_dir_entry *proc_net;
+extern struct proc_dir_entry *proc_net_stat;
+extern struct proc_dir_entry *proc_bus;
+extern struct proc_dir_entry *proc_root_driver;
+extern struct proc_dir_entry *proc_root_kcore;
+
+extern void proc_root_init(void);
+extern void proc_misc_init(void);
+
+struct mm_struct;
+
+struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
+struct dentry *proc_pid_unhash(struct task_struct *p);
+void proc_pid_flush(struct dentry *proc_dentry);
+int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
+unsigned long task_vsize(struct mm_struct *);
+int task_statm(struct mm_struct *, int *, int *, int *, int *);
+char *task_mem(struct mm_struct *, char *);
+
+extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
+						struct proc_dir_entry *parent);
+extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
+
+extern struct vfsmount *proc_mnt;
+extern int proc_fill_super(struct super_block *,void *,int);
+extern struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *);
+
+extern int proc_match(int, const char *,struct proc_dir_entry *);
+
+/*
+ * These are generic /proc routines that use the internal
+ * "struct proc_dir_entry" tree to traverse the filesystem.
+ *
+ * The /proc root directory has extended versions to take care
+ * of the /proc/<pid> subdirectories.
+ */
+extern int proc_readdir(struct file *, void *, filldir_t);
+extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
+
+extern struct file_operations proc_kcore_operations;
+extern struct file_operations proc_kmsg_operations;
+extern struct file_operations ppc_htab_operations;
+
+/*
+ * proc_tty.c
+ */
+struct tty_driver;
+extern void proc_tty_init(void);
+extern void proc_tty_register_driver(struct tty_driver *driver);
+extern void proc_tty_unregister_driver(struct tty_driver *driver);
+
+/*
+ * proc_devtree.c
+ */
+struct device_node;
+extern void proc_device_tree_init(void);
+#ifdef CONFIG_PROC_DEVICETREE
+extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
+#else /* !CONFIG_PROC_DEVICETREE */
+static inline void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *pde)
+{
+	return;
+}
+#endif /* CONFIG_PROC_DEVICETREE */
+
+extern struct proc_dir_entry *proc_symlink(const char *,
+		struct proc_dir_entry *, const char *);
+extern struct proc_dir_entry *proc_mkdir(const char *,struct proc_dir_entry *);
+extern struct proc_dir_entry *proc_mkdir_mode(const char *name, mode_t mode,
+			struct proc_dir_entry *parent);
+
+static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
+	mode_t mode, struct proc_dir_entry *base, 
+	read_proc_t *read_proc, void * data)
+{
+	struct proc_dir_entry *res=create_proc_entry(name,mode,base);
+	if (res) {
+		res->read_proc=read_proc;
+		res->data=data;
+	}
+	return res;
+}
+ 
+static inline struct proc_dir_entry *create_proc_info_entry(const char *name,
+	mode_t mode, struct proc_dir_entry *base, get_info_t *get_info)
+{
+	struct proc_dir_entry *res=create_proc_entry(name,mode,base);
+	if (res) res->get_info=get_info;
+	return res;
+}
+ 
+static inline struct proc_dir_entry *proc_net_create(const char *name,
+	mode_t mode, get_info_t *get_info)
+{
+	return create_proc_info_entry(name,mode,proc_net,get_info);
+}
+
+static inline struct proc_dir_entry *proc_net_fops_create(const char *name,
+	mode_t mode, struct file_operations *fops)
+{
+	struct proc_dir_entry *res = create_proc_entry(name, mode, proc_net);
+	if (res)
+		res->proc_fops = fops;
+	return res;
+}
+
+static inline void proc_net_remove(const char *name)
+{
+	remove_proc_entry(name,proc_net);
+}
+
+#else
+
+#define proc_root_driver NULL
+#define proc_net NULL
+#define proc_bus NULL
+
+#define proc_net_fops_create(name, mode, fops)  ({ (void)(mode), NULL; })
+#define proc_net_create(name, mode, info)	({ (void)(mode), NULL; })
+static inline void proc_net_remove(const char *name) {}
+
+static inline struct dentry *proc_pid_unhash(struct task_struct *p) { return NULL; }
+static inline void proc_pid_flush(struct dentry *proc_dentry) { }
+
+static inline struct proc_dir_entry *create_proc_entry(const char *name,
+	mode_t mode, struct proc_dir_entry *parent) { return NULL; }
+
+#define remove_proc_entry(name, parent) do {} while (0)
+
+static inline struct proc_dir_entry *proc_symlink(const char *name,
+		struct proc_dir_entry *parent,const char *dest) {return NULL;}
+static inline struct proc_dir_entry *proc_mkdir(const char *name,
+	struct proc_dir_entry *parent) {return NULL;}
+
+static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
+	mode_t mode, struct proc_dir_entry *base, 
+	read_proc_t *read_proc, void * data) { return NULL; }
+static inline struct proc_dir_entry *create_proc_info_entry(const char *name,
+	mode_t mode, struct proc_dir_entry *base, get_info_t *get_info)
+	{ return NULL; }
+
+struct tty_driver;
+static inline void proc_tty_register_driver(struct tty_driver *driver) {};
+static inline void proc_tty_unregister_driver(struct tty_driver *driver) {};
+
+extern struct proc_dir_entry proc_root;
+
+#endif /* CONFIG_PROC_FS */
+
+#if !defined(CONFIG_PROC_KCORE)
+static inline void kclist_add(struct kcore_list *new, void *addr, size_t size)
+{
+}
+#else
+extern void kclist_add(struct kcore_list *, void *, size_t);
+#endif
+
+struct proc_inode {
+	struct task_struct *task;
+	int type;
+	union {
+		int (*proc_get_link)(struct inode *, struct dentry **, struct vfsmount **);
+		int (*proc_read)(struct task_struct *task, char *page);
+	} op;
+	struct proc_dir_entry *pde;
+	struct inode vfs_inode;
+};
+
+static inline struct proc_inode *PROC_I(const struct inode *inode)
+{
+	return container_of(inode, struct proc_inode, vfs_inode);
+}
+
+static inline struct proc_dir_entry *PDE(const struct inode *inode)
+{
+	return PROC_I(inode)->pde;
+}
+
+#endif /* _LINUX_PROC_FS_H */
diff --git a/include/linux/profile.h b/include/linux/profile.h
new file mode 100644
index 000000000000..026969a5595c
--- /dev/null
+++ b/include/linux/profile.h
@@ -0,0 +1,104 @@
+#ifndef _LINUX_PROFILE_H
+#define _LINUX_PROFILE_H
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <asm/errno.h>
+
+#define CPU_PROFILING	1
+#define SCHED_PROFILING	2
+
+struct proc_dir_entry;
+struct pt_regs;
+
+/* init basic kernel profiler */
+void __init profile_init(void);
+void profile_tick(int, struct pt_regs *);
+void profile_hit(int, void *);
+#ifdef CONFIG_PROC_FS
+void create_prof_cpu_mask(struct proc_dir_entry *);
+#else
+#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
+#endif
+
+enum profile_type {
+	PROFILE_TASK_EXIT,
+	PROFILE_MUNMAP
+};
+
+#ifdef CONFIG_PROFILING
+
+struct notifier_block;
+struct task_struct;
+struct mm_struct;
+
+/* task is in do_exit() */
+void profile_task_exit(struct task_struct * task);
+
+/* task is dead, free task struct ? Returns 1 if
+ * the task was taken, 0 if the task should be freed.
+ */
+int profile_handoff_task(struct task_struct * task);
+
+/* sys_munmap */
+void profile_munmap(unsigned long addr);
+
+int task_handoff_register(struct notifier_block * n);
+int task_handoff_unregister(struct notifier_block * n);
+
+int profile_event_register(enum profile_type, struct notifier_block * n);
+int profile_event_unregister(enum profile_type, struct notifier_block * n);
+
+int register_timer_hook(int (*hook)(struct pt_regs *));
+void unregister_timer_hook(int (*hook)(struct pt_regs *));
+
+/* Timer based profiling hook */
+extern int (*timer_hook)(struct pt_regs *);
+
+struct pt_regs;
+
+#else
+
+static inline int task_handoff_register(struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int task_handoff_unregister(struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int profile_event_register(enum profile_type t, struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int profile_event_unregister(enum profile_type t, struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+#define profile_task_exit(a) do { } while (0)
+#define profile_handoff_task(a) (0)
+#define profile_munmap(a) do { } while (0)
+
+static inline int register_timer_hook(int (*hook)(struct pt_regs *))
+{
+	return -ENOSYS;
+}
+
+static inline void unregister_timer_hook(int (*hook)(struct pt_regs *))
+{
+	return;
+}
+
+#endif /* CONFIG_PROFILING */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_PROFILE_H */
diff --git a/include/linux/ps2esdi.h b/include/linux/ps2esdi.h
new file mode 100644
index 000000000000..c0e050b1dfe9
--- /dev/null
+++ b/include/linux/ps2esdi.h
@@ -0,0 +1,98 @@
+#ifndef _PS2ESDI_H_
+#define _PS2ESDI_H_
+
+#define NRML_ESDI_ID 0xddff
+#define INTG_ESDI_ID 0xdf9f
+
+#define PRIMARY_IO_BASE 0x3510
+#define ALT_IO_BASE 0x3518
+
+#define ESDI_CMD_INT (io_base+0)
+#define ESDI_STT_INT (io_base+0)
+#define ESDI_CONTROL (io_base+2)
+#define ESDI_STATUS  (io_base+2)
+#define ESDI_ATTN    (io_base+3)
+#define ESDI_INTRPT  (io_base+3)
+
+#define STATUS_ENABLED    0x01
+#define STATUS_ALTERNATE  0x02
+#define STATUS_BUSY       0x10
+#define STATUS_STAT_AVAIL 0x08
+#define STATUS_INTR       0x01
+#define STATUS_RESET_FAIL 0xea
+#define STATUS_CMD_INF	  0x04
+
+#define CTRL_SOFT_RESET   0xe4
+#define CTRL_HARD_RESET   0x80
+#define CTRL_EOI          0xe2
+#define CTRL_ENABLE_DMA   0x02
+#define CTRL_ENABLE_INTR  0x01
+#define CTRL_DISABLE_INTR  0x00
+
+#define ATT_EOI 0x02
+
+/* bits of word 0 of configuration status block. more info see p.38 of tech ref */
+#define CONFIG_IS 0x10 /* Invalid Secondary */
+#define CONFIG_ZD 0x08 /* Zero Defect */
+#define CONFIG_SF 0x04 /* Skewed Format */
+#define CONFIG_FR 0x02 /* Removable */
+#define CONFIG_RT 0x01 /* Retries */
+
+#define PORT_SYS_A   0x92
+#define PORT_DMA_FN  0x18
+#define PORT_DMA_EX  0x1a
+
+#define ON (unsigned char)0x40
+#define OFF (unsigned char)~ON
+#define LITE_ON outb(inb(PORT_SYS_A) | ON,PORT_SYS_A)
+#define LITE_OFF outb((inb(PORT_SYS_A) & OFF),PORT_SYS_A)
+
+#define FAIL 0
+#define SUCCES 1
+
+#define INT_CMD_COMPLETE 0x01
+#define INT_CMD_ECC      0x03
+#define INT_CMD_RETRY    0x05
+#define INT_CMD_FORMAT   0x06
+#define INT_CMD_ECC_RETRY 0x07
+#define INT_CMD_WARNING  0x08
+#define INT_CMD_ABORT    0x09
+#define INT_RESET        0x0A
+#define INT_TRANSFER_REQ 0x0B
+#define INT_CMD_FAILED   0x0C
+#define INT_DMA_ERR      0x0D
+#define INT_CMD_BLK_ERR  0x0E
+#define INT_ATTN_ERROR   0x0F
+
+#define DMA_MASK_CHAN 0x90
+#define DMA_UNMASK_CHAN 0xA0
+#define DMA_WRITE_ADDR 0x20
+#define DMA_WRITE_TC 0x40
+#define DMA_WRITE_MODE 0x70
+
+#define CMD_GET_DEV_CONFIG 0x09
+#define CMD_READ 0x4601
+#define CMD_WRITE 0x4602
+#define DMA_READ_16 0x4C
+#define DMA_WRITE_16 0x44
+
+
+#define MB 1024*1024
+#define SECT_SIZE 512   
+
+#define ERROR 1
+#define OK 0
+
+#define HDIO_GETGEO 0x0301
+
+#define FALSE 0
+#define TRUE !FALSE
+
+struct ps2esdi_geometry {
+	unsigned char heads;
+	unsigned char sectors;
+	unsigned short cylinders;
+	unsigned long start;
+};
+
+#endif /* _PS2ESDI_H_ */
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
new file mode 100644
index 000000000000..a373fc254df2
--- /dev/null
+++ b/include/linux/ptrace.h
@@ -0,0 +1,122 @@
+#ifndef _LINUX_PTRACE_H
+#define _LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+#define PTRACE_TRACEME		   0
+#define PTRACE_PEEKTEXT		   1
+#define PTRACE_PEEKDATA		   2
+#define PTRACE_PEEKUSR		   3
+#define PTRACE_POKETEXT		   4
+#define PTRACE_POKEDATA		   5
+#define PTRACE_POKEUSR		   6
+#define PTRACE_CONT		   7
+#define PTRACE_KILL		   8
+#define PTRACE_SINGLESTEP	   9
+
+#define PTRACE_ATTACH		0x10
+#define PTRACE_DETACH		0x11
+
+#define PTRACE_SYSCALL		  24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
+#define PTRACE_SETOPTIONS	0x4200
+#define PTRACE_GETEVENTMSG	0x4201
+#define PTRACE_GETSIGINFO	0x4202
+#define PTRACE_SETSIGINFO	0x4203
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD	0x00000001
+#define PTRACE_O_TRACEFORK	0x00000002
+#define PTRACE_O_TRACEVFORK	0x00000004
+#define PTRACE_O_TRACECLONE	0x00000008
+#define PTRACE_O_TRACEEXEC	0x00000010
+#define PTRACE_O_TRACEVFORKDONE	0x00000020
+#define PTRACE_O_TRACEEXIT	0x00000040
+
+#define PTRACE_O_MASK		0x0000007f
+
+/* Wait extended result codes for the above trace options.  */
+#define PTRACE_EVENT_FORK	1
+#define PTRACE_EVENT_VFORK	2
+#define PTRACE_EVENT_CLONE	3
+#define PTRACE_EVENT_EXEC	4
+#define PTRACE_EVENT_VFORK_DONE	5
+#define PTRACE_EVENT_EXIT	6
+
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+/*
+ * Ptrace flags
+ */
+
+#define PT_PTRACED	0x00000001
+#define PT_DTRACE	0x00000002	/* delayed trace (used on m68k, i386) */
+#define PT_TRACESYSGOOD	0x00000004
+#define PT_PTRACE_CAP	0x00000008	/* ptracer can follow suid-exec */
+#define PT_TRACE_FORK	0x00000010
+#define PT_TRACE_VFORK	0x00000020
+#define PT_TRACE_CLONE	0x00000040
+#define PT_TRACE_EXEC	0x00000080
+#define PT_TRACE_VFORK_DONE	0x00000100
+#define PT_TRACE_EXIT	0x00000200
+#define PT_ATTACHED	0x00000400	/* parent != real_parent */
+
+#define PT_TRACE_MASK	0x000003f4
+
+/* single stepping state bits (used on ARM and PA-RISC) */
+#define PT_SINGLESTEP_BIT	31
+#define PT_SINGLESTEP		(1<<PT_SINGLESTEP_BIT)
+#define PT_BLOCKSTEP_BIT	30
+#define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
+
+#include <linux/compiler.h>		/* For unlikely.  */
+#include <linux/sched.h>		/* For struct task_struct.  */
+
+extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
+extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
+extern int ptrace_attach(struct task_struct *tsk);
+extern int ptrace_detach(struct task_struct *, unsigned int);
+extern void ptrace_disable(struct task_struct *);
+extern int ptrace_check_attach(struct task_struct *task, int kill);
+extern int ptrace_request(struct task_struct *child, long request, long addr, long data);
+extern void ptrace_notify(int exit_code);
+extern void __ptrace_link(struct task_struct *child,
+			  struct task_struct *new_parent);
+extern void __ptrace_unlink(struct task_struct *child);
+extern void ptrace_untrace(struct task_struct *child);
+
+static inline void ptrace_link(struct task_struct *child,
+			       struct task_struct *new_parent)
+{
+	if (unlikely(child->ptrace))
+		__ptrace_link(child, new_parent);
+}
+static inline void ptrace_unlink(struct task_struct *child)
+{
+	if (unlikely(child->ptrace))
+		__ptrace_unlink(child);
+}
+
+
+#ifndef force_successful_syscall_return
+/*
+ * System call handlers that, upon successful completion, need to return a
+ * negative value should call force_successful_syscall_return() right before
+ * returning.  On architectures where the syscall convention provides for a
+ * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
+ * others), this macro can be used to ensure that the error flag will not get
+ * set.  On architectures which do not support a separate error flag, the macro
+ * is a no-op and the spurious error condition needs to be filtered out by some
+ * other means (e.g., in user-level, by passing an extra argument to the
+ * syscall handler, or something along those lines).
+ */
+#define force_successful_syscall_return() do { } while (0)
+#endif
+
+#endif
+
+#endif
diff --git a/include/linux/qic117.h b/include/linux/qic117.h
new file mode 100644
index 000000000000..07b537e5d359
--- /dev/null
+++ b/include/linux/qic117.h
@@ -0,0 +1,290 @@
+#ifndef _QIC117_H
+#define _QIC117_H
+
+/*
+ *      Copyright (C) 1993-1996 Bas Laarhoven,
+ *                (C) 1997      Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $
+ * $Revision: 1.2 $
+ * $Date: 1997/10/05 19:19:32 $
+ *
+ *      This file contains QIC-117 spec. related definitions for the
+ *      QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
+ *
+ *      These data were taken from the Quarter-Inch Cartridge
+ *      Drive Standards, Inc. document titled:
+ *      `Common Command Set Interface Specification for Flexible
+ *       Disk Controller Based Minicartridge Tape Drives'
+ *       document QIC-117 Revision J, 28 Aug 96.
+ *      For more information, contact:
+ *       Quarter-Inch Cartridge Drive Standards, Inc.
+ *       311 East Carrillo Street
+ *       Santa Barbara, California 93101
+ *       Telephone (805) 963-3853
+ *       Fax       (805) 962-1541
+ *       WWW       http://www.qic.org
+ *
+ *      Current QIC standard revisions (of interest) are:
+ *       QIC-40-MC,   Rev. M,  2 Sep 92.
+ *       QIC-80-MC,   Rev. N, 20 Mar 96.
+ *       QIC-80-MC,   Rev. K, 15 Dec 94.
+ *       QIC-113,     Rev. G, 15 Jun 95.
+ *       QIC-117,     Rev. J, 28 Aug 96.
+ *       QIC-122,     Rev. B,  6 Mar 91.
+ *       QIC-130,     Rev. C,  2 Sep 92.
+ *       QIC-3010-MC, Rev. F, 14 Jun 95.
+ *       QIC-3020-MC, Rev. G, 31 Aug 95.
+ *       QIC-CRF3,    Rev. B, 15 Jun 95.
+ * */
+
+/*
+ *      QIC-117 common command set rev. J.
+ *      These commands are sent to the tape unit
+ *      as number of pulses over the step line.
+ */
+
+typedef enum {
+	QIC_NO_COMMAND                  = 0,
+	QIC_RESET 			= 1,
+	QIC_REPORT_NEXT_BIT		= 2,
+	QIC_PAUSE 			= 3,
+	QIC_MICRO_STEP_PAUSE		= 4,
+	QIC_ALTERNATE_TIMEOUT		= 5,
+	QIC_REPORT_DRIVE_STATUS		= 6,
+	QIC_REPORT_ERROR_CODE		= 7,
+	QIC_REPORT_DRIVE_CONFIGURATION	= 8,
+	QIC_REPORT_ROM_VERSION		= 9,
+	QIC_LOGICAL_FORWARD		= 10,
+	QIC_PHYSICAL_REVERSE		= 11,
+	QIC_PHYSICAL_FORWARD		= 12,
+	QIC_SEEK_HEAD_TO_TRACK		= 13,
+	QIC_SEEK_LOAD_POINT		= 14,
+	QIC_ENTER_FORMAT_MODE		= 15,
+	QIC_WRITE_REFERENCE_BURST	= 16,
+	QIC_ENTER_VERIFY_MODE		= 17,
+	QIC_STOP_TAPE			= 18,
+/* commands 19-20: reserved */
+	QIC_MICRO_STEP_HEAD_UP		= 21,
+	QIC_MICRO_STEP_HEAD_DOWN	= 22,
+	QIC_SOFT_SELECT			= 23,
+	QIC_SOFT_DESELECT		= 24,
+	QIC_SKIP_REVERSE		= 25,
+	QIC_SKIP_FORWARD		= 26,
+	QIC_SELECT_RATE			= 27,
+/* command 27, in ccs2: Select Rate or Format */
+	QIC_ENTER_DIAGNOSTIC_1		= 28,
+	QIC_ENTER_DIAGNOSTIC_2		= 29,
+	QIC_ENTER_PRIMARY_MODE		= 30,
+/* command 31: vendor unique */
+	QIC_REPORT_VENDOR_ID		= 32,
+	QIC_REPORT_TAPE_STATUS		= 33,
+	QIC_SKIP_EXTENDED_REVERSE	= 34,
+	QIC_SKIP_EXTENDED_FORWARD	= 35,
+	QIC_CALIBRATE_TAPE_LENGTH	= 36,
+	QIC_REPORT_FORMAT_SEGMENTS	= 37,
+	QIC_SET_FORMAT_SEGMENTS		= 38,
+/* commands 39-45: reserved */
+	QIC_PHANTOM_SELECT		= 46,
+	QIC_PHANTOM_DESELECT		= 47
+} qic117_cmd_t;
+
+typedef enum {
+	discretional = 0, required, ccs1, ccs2
+} qic_compatibility;
+
+typedef enum {
+	unused, mode, motion, report
+} command_types;
+
+struct qic117_command_table {
+	char *name;
+	__u8 mask;
+	__u8 state;
+	__u8 cmd_type;
+	__u8 non_intr;
+	__u8 level;
+};
+
+#define QIC117_COMMANDS {\
+/* command                           mask  state cmd_type           */\
+/* |    name                         |     |     |       non_intr   */\
+/* |    |                            |     |     |       |  level   */\
+/* 0*/ {NULL,                        0x00, 0x00, mode,   0, discretional},\
+/* 1*/ {"soft reset",                0x00, 0x00, motion, 1, required},\
+/* 2*/ {"report next bit",           0x00, 0x00, report, 0, required},\
+/* 3*/ {"pause",                     0x36, 0x24, motion, 1, required},\
+/* 4*/ {"micro step pause",          0x36, 0x24, motion, 1, required},\
+/* 5*/ {"alternate command timeout", 0x00, 0x00, mode,   0, required},\
+/* 6*/ {"report drive status",       0x00, 0x00, report, 0, required},\
+/* 7*/ {"report error code",         0x01, 0x01, report, 0, required},\
+/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\
+/* 9*/ {"report rom version",        0x00, 0x00, report, 0, required},\
+/*10*/ {"logical forward",           0x37, 0x25, motion, 0, required},\
+/*11*/ {"physical reverse",          0x17, 0x05, motion, 0, required},\
+/*12*/ {"physical forward",          0x17, 0x05, motion, 0, required},\
+/*13*/ {"seek head to track",        0x37, 0x25, motion, 0, required},\
+/*14*/ {"seek load point",           0x17, 0x05, motion, 1, required},\
+/*15*/ {"enter format mode",         0x1f, 0x05, mode,   0, required},\
+/*16*/ {"write reference burst",     0x1f, 0x05, motion, 1, required},\
+/*17*/ {"enter verify mode",         0x37, 0x25, mode,   0, required},\
+/*18*/ {"stop tape",                 0x00, 0x00, motion, 1, required},\
+/*19*/ {"reserved (19)",             0x00, 0x00, unused, 0, discretional},\
+/*20*/ {"reserved (20)",             0x00, 0x00, unused, 0, discretional},\
+/*21*/ {"micro step head up",        0x02, 0x00, motion, 0, required},\
+/*22*/ {"micro step head down",      0x02, 0x00, motion, 0, required},\
+/*23*/ {"soft select",               0x00, 0x00, mode,   0, discretional},\
+/*24*/ {"soft deselect",             0x00, 0x00, mode,   0, discretional},\
+/*25*/ {"skip segments reverse",     0x36, 0x24, motion, 1, required},\
+/*26*/ {"skip segments forward",     0x36, 0x24, motion, 1, required},\
+/*27*/ {"select rate or format",     0x03, 0x01, mode,   0, required /* [ccs2] */},\
+/*28*/ {"enter diag mode 1",         0x00, 0x00, mode,   0, discretional},\
+/*29*/ {"enter diag mode 2",         0x00, 0x00, mode,   0, discretional},\
+/*30*/ {"enter primary mode",        0x00, 0x00, mode,   0, required},\
+/*31*/ {"vendor unique (31)",        0x00, 0x00, unused, 0, discretional},\
+/*32*/ {"report vendor id",          0x00, 0x00, report, 0, required},\
+/*33*/ {"report tape status",        0x04, 0x04, report, 0, ccs1},\
+/*34*/ {"skip extended reverse",     0x36, 0x24, motion, 1, ccs1},\
+/*35*/ {"skip extended forward",     0x36, 0x24, motion, 1, ccs1},\
+/*36*/ {"calibrate tape length",     0x17, 0x05, motion, 1, ccs2},\
+/*37*/ {"report format segments",    0x17, 0x05, report, 0, ccs2},\
+/*38*/ {"set format segments",       0x17, 0x05, mode,   0, ccs2},\
+/*39*/ {"reserved (39)",             0x00, 0x00, unused, 0, discretional},\
+/*40*/ {"vendor unique (40)",        0x00, 0x00, unused, 0, discretional},\
+/*41*/ {"vendor unique (41)",        0x00, 0x00, unused, 0, discretional},\
+/*42*/ {"vendor unique (42)",        0x00, 0x00, unused, 0, discretional},\
+/*43*/ {"vendor unique (43)",        0x00, 0x00, unused, 0, discretional},\
+/*44*/ {"vendor unique (44)",        0x00, 0x00, unused, 0, discretional},\
+/*45*/ {"vendor unique (45)",        0x00, 0x00, unused, 0, discretional},\
+/*46*/ {"phantom select",            0x00, 0x00, mode,   0, discretional},\
+/*47*/ {"phantom deselect",          0x00, 0x00, mode,   0, discretional},\
+}
+
+/*
+ *      Status bits returned by QIC_REPORT_DRIVE_STATUS
+ */
+
+#define QIC_STATUS_READY	0x01	/* Drive is ready or idle. */
+#define QIC_STATUS_ERROR	0x02	/* Error detected, must read
+					   error code to clear this */
+#define QIC_STATUS_CARTRIDGE_PRESENT 0x04	/* Tape is present */
+#define QIC_STATUS_WRITE_PROTECT 0x08	/* Tape is write protected */
+#define QIC_STATUS_NEW_CARTRIDGE 0x10	/* New cartridge inserted, must
+					   read error status to clear. */
+#define QIC_STATUS_REFERENCED	0x20	/* Cartridge appears to have been
+					   formatted. */
+#define QIC_STATUS_AT_BOT	0x40	/* Cartridge is at physical
+					   beginning of tape. */
+#define QIC_STATUS_AT_EOT	0x80	/* Cartridge is at physical end
+					   of tape. */
+/*
+ *      Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION
+ */
+
+#define QIC_CONFIG_RATE_MASK	0x18
+#define QIC_CONFIG_RATE_SHIFT	3
+#define QIC_CONFIG_RATE_250	0
+#define QIC_CONFIG_RATE_500	2
+#define QIC_CONFIG_RATE_1000	3
+#define QIC_CONFIG_RATE_2000	1
+#define QIC_CONFIG_RATE_4000    0       /* since QIC-117 Rev. J */
+
+#define QIC_CONFIG_LONG		0x40	/* Extra Length Tape Detected */
+#define QIC_CONFIG_80		0x80	/* QIC-80 detected. */
+
+/*
+ *      Status bits returned by QIC_REPORT_TAPE_STATUS
+ */
+
+#define QIC_TAPE_STD_MASK       0x0f
+#define QIC_TAPE_QIC40  	0x01
+#define QIC_TAPE_QIC80  	0x02
+#define QIC_TAPE_QIC3020  	0x03
+#define QIC_TAPE_QIC3010  	0x04
+
+#define QIC_TAPE_LEN_MASK	0x70
+#define QIC_TAPE_205FT		0x10
+#define QIC_TAPE_307FT		0x20
+#define QIC_TAPE_VARIABLE	0x30
+#define QIC_TAPE_1100FT		0x40
+#define QIC_TAPE_FLEX		0x60
+
+#define QIC_TAPE_WIDE		0x80
+
+/* Define a value (in feet) slightly higher than 
+ * the possible maximum tape length.
+ */
+#define QIC_TOP_TAPE_LEN	1500
+
+/*
+ *      Errors: List of error codes, and their severity.
+ */
+
+typedef struct {
+	char *message;		/* Text describing the error. */
+	unsigned int fatal:1;	/* Non-zero if the error is fatal. */
+} ftape_error;
+
+#define QIC117_ERRORS {\
+  /* 0*/ { "No error", 0, },\
+  /* 1*/ { "Command Received while Drive Not Ready", 0, },\
+  /* 2*/ { "Cartridge Not Present or Removed", 1, },\
+  /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\
+  /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\
+  /* 5*/ { "Cartridge Write Protected", 1, },\
+  /* 6*/ { "Undefined or Reserved Command Code", 1, },\
+  /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\
+  /* 8*/ { "Illegal Command in Report Subcontext", 0, },\
+  /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\
+  /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\
+  /*11*/ { "Warning--Read Gain Setting Error", 1, },\
+  /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\
+  /*13*/ { "Command Received While New Cartridge Pending", 1, },\
+  /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\
+  /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\
+  /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\
+  /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\
+  /*18*/ { "Logical EOT Before All Segments generated", 1, },\
+  /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\
+  /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\
+  /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\
+  /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\
+  /*23*/ { "Motion Time-out Error", 1, },\
+  /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\
+  /*25*/ { "Transmit Overrun (obs)", 1, },\
+  /*26*/ { "Power On Reset Occurred", 0, },\
+  /*27*/ { "Software Reset Occurred", 0, },\
+  /*28*/ { "Diagnostic Mode 1 Error", 1, },\
+  /*29*/ { "Diagnostic Mode 2 Error", 1, },\
+  /*30*/ { "Command Received During Non-Interruptible Process", 1, },\
+  /*31*/ { "Rate or Format Selection Error", 1, },\
+  /*32*/ { "Illegal Command While in High Speed Mode", 1, },\
+  /*33*/ { "Illegal Seek Segment Value", 1, },\
+  /*34*/ { "Invalid Media", 1, },\
+  /*35*/ { "Head Positioning Failure", 1, },\
+  /*36*/ { "Write Reference Burst Failure", 1, },\
+  /*37*/ { "Prom Code Missing", 1, },\
+  /*38*/ { "Invalid Format", 1, },\
+  /*39*/ { "EOT/BOT System Failure", 1, },\
+  /*40*/ { "Prom A Checksum Error", 1, },\
+  /*41*/ { "Drive Wakeup Reset Occurred", 1, },\
+  /*42*/ { "Prom B Checksum Error", 1, },\
+  /*43*/ { "Illegal Entry into Format Mode", 1, },\
+}
+
+#endif				/* _QIC117_H */
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
new file mode 100644
index 000000000000..22ba580b0ae8
--- /dev/null
+++ b/include/linux/qnx4_fs.h
@@ -0,0 +1,150 @@
+/*
+ *  Name                         : qnx4_fs.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : qnx4 global filesystem definitions
+ *  Version                      : 1.0.2
+ *  Last modified                : 2000-01-31
+ *
+ *  History                      : 23-03-1998 created
+ */
+#ifndef _LINUX_QNX4_FS_H
+#define _LINUX_QNX4_FS_H
+
+#include <linux/qnxtypes.h>
+
+#define QNX4_ROOT_INO 1
+
+#define QNX4_MAX_XTNTS_PER_XBLK	60
+/* for di_status */
+#define QNX4_FILE_USED          0x01
+#define QNX4_FILE_MODIFIED      0x02
+#define QNX4_FILE_BUSY          0x04
+#define QNX4_FILE_LINK          0x08
+#define QNX4_FILE_INODE         0x10
+#define QNX4_FILE_FSYSCLEAN     0x20
+
+#define QNX4_I_MAP_SLOTS	8
+#define QNX4_Z_MAP_SLOTS	64
+#define QNX4_SUPER_MAGIC	0x002f	/* qnx4 fs detection */
+#define QNX4_VALID_FS		0x0001	/* Clean fs. */
+#define QNX4_ERROR_FS		0x0002	/* fs has errors. */
+#define QNX4_BLOCK_SIZE         0x200	/* blocksize of 512 bytes */
+#define QNX4_BLOCK_SIZE_BITS    9	/* blocksize shift */
+#define QNX4_DIR_ENTRY_SIZE     0x040	/* dir entry size of 64 bytes */
+#define QNX4_DIR_ENTRY_SIZE_BITS 6	/* dir entry size shift */
+#define QNX4_XBLK_ENTRY_SIZE    0x200	/* xblk entry size */
+#define QNX4_INODES_PER_BLOCK   0x08	/* 512 / 64 */
+
+/* for filenames */
+#define QNX4_SHORT_NAME_MAX	16
+#define QNX4_NAME_MAX		48
+
+/*
+ * This is the original qnx4 inode layout on disk.
+ */
+struct qnx4_inode_entry {
+	char		di_fname[QNX4_SHORT_NAME_MAX];
+	qnx4_off_t	di_size;
+	qnx4_xtnt_t	di_first_xtnt;
+	__u32		di_xblk;
+	__s32		di_ftime;
+	__s32		di_mtime;
+	__s32		di_atime;
+	__s32		di_ctime;
+	qnx4_nxtnt_t	di_num_xtnts;
+	qnx4_mode_t	di_mode;
+	qnx4_muid_t	di_uid;
+	qnx4_mgid_t	di_gid;
+	qnx4_nlink_t	di_nlink;
+	__u8		di_zero[4];
+	qnx4_ftype_t	di_type;
+	__u8		di_status;
+};
+
+struct qnx4_link_info {
+	char		dl_fname[QNX4_NAME_MAX];
+	__u32		dl_inode_blk;
+	__u8		dl_inode_ndx;
+	__u8		dl_spare[10];
+	__u8		dl_status;
+};
+
+struct qnx4_xblk {
+	__u32		xblk_next_xblk;
+	__u32		xblk_prev_xblk;
+	__u8		xblk_num_xtnts;
+	__u8		xblk_spare[3];
+	__s32		xblk_num_blocks;
+	qnx4_xtnt_t	xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
+	char		xblk_signature[8];
+	qnx4_xtnt_t	xblk_first_xtnt;
+};
+
+struct qnx4_super_block {
+	struct qnx4_inode_entry RootDir;
+	struct qnx4_inode_entry Inode;
+	struct qnx4_inode_entry Boot;
+	struct qnx4_inode_entry AltBoot;
+};
+
+#ifdef __KERNEL__
+
+#define QNX4_DEBUG 0
+
+#if QNX4_DEBUG
+#define QNX4DEBUG(X) printk X
+#else
+#define QNX4DEBUG(X) (void) 0
+#endif
+
+struct qnx4_sb_info {
+	struct buffer_head	*sb_buf;	/* superblock buffer */
+	struct qnx4_super_block	*sb;		/* our superblock */
+	unsigned int		Version;	/* may be useful */
+	struct qnx4_inode_entry	*BitMap;	/* useful */
+};
+
+struct qnx4_inode_info {
+	struct qnx4_inode_entry raw;
+	loff_t mmu_private;
+	struct inode vfs_inode;
+};
+
+extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
+extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
+extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
+
+extern struct buffer_head *qnx4_bread(struct inode *, int, int);
+
+extern struct inode_operations qnx4_file_inode_operations;
+extern struct inode_operations qnx4_dir_inode_operations;
+extern struct file_operations qnx4_file_operations;
+extern struct file_operations qnx4_dir_operations;
+extern int qnx4_is_free(struct super_block *sb, long block);
+extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy);
+extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd);
+extern void qnx4_truncate(struct inode *inode);
+extern void qnx4_free_inode(struct inode *inode);
+extern int qnx4_unlink(struct inode *dir, struct dentry *dentry);
+extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry);
+extern int qnx4_sync_file(struct file *file, struct dentry *dentry, int);
+extern int qnx4_sync_inode(struct inode *inode);
+
+static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct qnx4_inode_info *qnx4_i(struct inode *inode)
+{
+	return container_of(inode, struct qnx4_inode_info, vfs_inode);
+}
+
+static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode)
+{
+	return &qnx4_i(inode)->raw;
+}
+
+#endif				/* __KERNEL__ */
+
+#endif
diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h
new file mode 100644
index 000000000000..fb518e318c7c
--- /dev/null
+++ b/include/linux/qnxtypes.h
@@ -0,0 +1,29 @@
+/*
+ *  Name                         : qnxtypes.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : standard qnx types
+ *  Version                      : 1.0.2
+ *  Last modified                : 2000-01-06
+ *
+ *  History                      : 22-03-1998 created
+ *
+ */
+
+#ifndef _QNX4TYPES_H
+#define _QNX4TYPES_H
+
+typedef __u16 qnx4_nxtnt_t;
+typedef __u8  qnx4_ftype_t;
+
+typedef struct {
+	__u32 xtnt_blk;
+	__u32 xtnt_size;
+} qnx4_xtnt_t;
+
+typedef __u16 qnx4_mode_t;
+typedef __u16 qnx4_muid_t;
+typedef __u16 qnx4_mgid_t;
+typedef __u32 qnx4_off_t;
+typedef __u16 qnx4_nlink_t;
+
+#endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
new file mode 100644
index 000000000000..ac5b90f4f256
--- /dev/null
+++ b/include/linux/quota.h
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Version: $Id: quota.h,v 2.0 1996/11/17 16:48:14 mvw Exp mvw $
+ */
+
+#ifndef _LINUX_QUOTA_
+#define _LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#define __DQUOT_VERSION__	"dquot_6.5.1"
+#define __DQUOT_NUM_VERSION__	6*10000+5*100+1
+
+typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
+typedef __u64 qsize_t;          /* Type in which we store sizes */
+
+extern spinlock_t dq_data_lock;
+
+/* Size of blocks in which are counted size limits */
+#define QUOTABLOCK_BITS 10
+#define QUOTABLOCK_SIZE (1 << QUOTABLOCK_BITS)
+
+/* Conversion routines from and to quota blocks */
+#define qb2kb(x) ((x) << (QUOTABLOCK_BITS-10))
+#define kb2qb(x) ((x) >> (QUOTABLOCK_BITS-10))
+#define toqb(x) (((x) + QUOTABLOCK_SIZE - 1) >> QUOTABLOCK_BITS)
+
+#define MAXQUOTAS 2
+#define USRQUOTA  0		/* element used for user quotas */
+#define GRPQUOTA  1		/* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+	"user",    /* USRQUOTA */ \
+	"group",   /* GRPQUOTA */ \
+	"undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK  0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON  0x800002	/* turn quotas on */
+#define Q_QUOTAOFF 0x800003	/* turn quotas off */
+#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
+#define Q_GETINFO  0x800005	/* get information about quota files */
+#define Q_SETINFO  0x800006	/* set information about quota files */
+#define Q_GETQUOTA 0x800007	/* get user quota structure */
+#define Q_SETQUOTA 0x800008	/* set user quota structure */
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define QIF_BLIMITS	1
+#define QIF_SPACE	2
+#define QIF_ILIMITS	4
+#define QIF_INODES	8
+#define QIF_BTIME	16
+#define QIF_ITIME	32
+#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
+#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
+#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+	__u64 dqb_bhardlimit;
+	__u64 dqb_bsoftlimit;
+	__u64 dqb_curspace;
+	__u64 dqb_ihardlimit;
+	__u64 dqb_isoftlimit;
+	__u64 dqb_curinodes;
+	__u64 dqb_btime;
+	__u64 dqb_itime;
+	__u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE	1
+#define IIF_IGRACE	2
+#define IIF_FLAGS	4
+#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+	__u64 dqi_bgrace;
+	__u64 dqi_igrace;
+	__u32 dqi_flags;
+	__u32 dqi_valid;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/dqblk_xfs.h>
+#include <linux/dqblk_v1.h>
+#include <linux/dqblk_v2.h>
+
+/* Maximal numbers of writes for quota operation (insert/delete/update)
+ * (over all formats) - info block, 4 pointer blocks, data block */
+#define DQUOT_MAX_WRITES	6
+
+/*
+ * Data for one user/group kept in memory
+ */
+struct mem_dqblk {
+	__u32 dqb_bhardlimit;	/* absolute limit on disk blks alloc */
+	__u32 dqb_bsoftlimit;	/* preferred limit on disk blks */
+	qsize_t dqb_curspace;	/* current used space */
+	__u32 dqb_ihardlimit;	/* absolute limit on allocated inodes */
+	__u32 dqb_isoftlimit;	/* preferred inode limit */
+	__u32 dqb_curinodes;	/* current # allocated inodes */
+	time_t dqb_btime;	/* time limit for excessive disk use */
+	time_t dqb_itime;	/* time limit for excessive inode use */
+};
+
+/*
+ * Data for one quotafile kept in memory
+ */
+struct quota_format_type;
+
+struct mem_dqinfo {
+	struct quota_format_type *dqi_format;
+	struct list_head dqi_dirty_list;	/* List of dirty dquots */
+	unsigned long dqi_flags;
+	unsigned int dqi_bgrace;
+	unsigned int dqi_igrace;
+	union {
+		struct v1_mem_dqinfo v1_i;
+		struct v2_mem_dqinfo v2_i;
+	} u;
+};
+
+struct super_block;
+
+#define DQF_MASK 0xffff		/* Mask for format specific flags */
+#define DQF_INFO_DIRTY_B 16
+#define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
+
+extern void mark_info_dirty(struct super_block *sb, int type);
+#define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
+#define info_any_dquot_dirty(info) (!list_empty(&(info)->dqi_dirty_list))
+#define info_any_dirty(info) (info_dirty(info) || info_any_dquot_dirty(info))
+
+#define sb_dqopt(sb) (&(sb)->s_dquot)
+#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
+
+struct dqstats {
+	int lookups;
+	int drops;
+	int reads;
+	int writes;
+	int cache_hits;
+	int allocated_dquots;
+	int free_dquots;
+	int syncs;
+};
+
+extern struct dqstats dqstats;
+
+#define DQ_MOD_B	0	/* dquot modified since read */
+#define DQ_BLKS_B	1	/* uid/gid has been warned about blk limit */
+#define DQ_INODES_B	2	/* uid/gid has been warned about inode limit */
+#define DQ_FAKE_B	3	/* no limits only usage */
+#define DQ_READ_B	4	/* dquot was read into memory */
+#define DQ_ACTIVE_B	5	/* dquot is active (dquot_release not called) */
+#define DQ_WAITFREE_B	6	/* dquot being waited (by invalidate_dquots) */
+
+struct dquot {
+	struct hlist_node dq_hash;	/* Hash list in memory */
+	struct list_head dq_inuse;	/* List of all quotas */
+	struct list_head dq_free;	/* Free list element */
+	struct list_head dq_dirty;	/* List of dirty dquots */
+	struct semaphore dq_lock;	/* dquot IO lock */
+	atomic_t dq_count;		/* Use count */
+	wait_queue_head_t dq_wait_unused;	/* Wait queue for dquot to become unused */
+	struct super_block *dq_sb;	/* superblock this applies to */
+	unsigned int dq_id;		/* ID this applies to (uid, gid) */
+	loff_t dq_off;			/* Offset of dquot on disk */
+	unsigned long dq_flags;		/* See DQ_* */
+	short dq_type;			/* Type of quota */
+	struct mem_dqblk dq_dqb;	/* Diskquota usage */
+};
+
+#define NODQUOT (struct dquot *)NULL
+
+#define QUOTA_OK          0
+#define NO_QUOTA          1
+
+/* Operations which must be implemented by each quota format */
+struct quota_format_ops {
+	int (*check_quota_file)(struct super_block *sb, int type);	/* Detect whether file is in our format */
+	int (*read_file_info)(struct super_block *sb, int type);	/* Read main info about file - called on quotaon() */
+	int (*write_file_info)(struct super_block *sb, int type);	/* Write main info about file */
+	int (*free_file_info)(struct super_block *sb, int type);	/* Called on quotaoff() */
+	int (*read_dqblk)(struct dquot *dquot);		/* Read structure for one user */
+	int (*commit_dqblk)(struct dquot *dquot);	/* Write structure for one user */
+	int (*release_dqblk)(struct dquot *dquot);	/* Called when last reference to dquot is being dropped */
+};
+
+/* Operations working with dquots */
+struct dquot_operations {
+	int (*initialize) (struct inode *, int);
+	int (*drop) (struct inode *);
+	int (*alloc_space) (struct inode *, qsize_t, int);
+	int (*alloc_inode) (const struct inode *, unsigned long);
+	int (*free_space) (struct inode *, qsize_t);
+	int (*free_inode) (const struct inode *, unsigned long);
+	int (*transfer) (struct inode *, struct iattr *);
+	int (*write_dquot) (struct dquot *);		/* Ordinary dquot write */
+	int (*acquire_dquot) (struct dquot *);		/* Quota is going to be created on disk */
+	int (*release_dquot) (struct dquot *);		/* Quota is going to be deleted from disk */
+	int (*mark_dirty) (struct dquot *);		/* Dquot is marked dirty */
+	int (*write_info) (struct super_block *, int);	/* Write of quota "superblock" */
+};
+
+/* Operations handling requests from userspace */
+struct quotactl_ops {
+	int (*quota_on)(struct super_block *, int, int, char *);
+	int (*quota_off)(struct super_block *, int);
+	int (*quota_sync)(struct super_block *, int);
+	int (*get_info)(struct super_block *, int, struct if_dqinfo *);
+	int (*set_info)(struct super_block *, int, struct if_dqinfo *);
+	int (*get_dqblk)(struct super_block *, int, qid_t, struct if_dqblk *);
+	int (*set_dqblk)(struct super_block *, int, qid_t, struct if_dqblk *);
+	int (*get_xstate)(struct super_block *, struct fs_quota_stat *);
+	int (*set_xstate)(struct super_block *, unsigned int, int);
+	int (*get_xquota)(struct super_block *, int, qid_t, struct fs_disk_quota *);
+	int (*set_xquota)(struct super_block *, int, qid_t, struct fs_disk_quota *);
+};
+
+struct quota_format_type {
+	int qf_fmt_id;	/* Quota format id */
+	struct quota_format_ops *qf_ops;	/* Operations of format */
+	struct module *qf_owner;		/* Module implementing quota format */
+	struct quota_format_type *qf_next;
+};
+
+#define DQUOT_USR_ENABLED	0x01		/* User diskquotas enabled */
+#define DQUOT_GRP_ENABLED	0x02		/* Group diskquotas enabled */
+
+struct quota_info {
+	unsigned int flags;			/* Flags for diskquotas on this device */
+	struct semaphore dqio_sem;		/* lock device while I/O in progress */
+	struct semaphore dqonoff_sem;		/* Serialize quotaon & quotaoff */
+	struct rw_semaphore dqptr_sem;		/* serialize ops using quota_info struct, pointers from inode to dquots */
+	struct inode *files[MAXQUOTAS];		/* inodes of quotafiles */
+	struct vfsmount *mnt[MAXQUOTAS];	/* mountpoint entries of filesystems with quota files */
+	struct mem_dqinfo info[MAXQUOTAS];	/* Information for each quota type */
+	struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
+};
+
+/* Inline would be better but we need to dereference super_block which is not defined yet */
+int mark_dquot_dirty(struct dquot *dquot);
+
+#define dquot_dirty(dquot) test_bit(DQ_MOD_B, &(dquot)->dq_flags)
+
+#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
+	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
+
+#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
+				  sb_has_quota_enabled(sb, GRPQUOTA))
+
+int register_quota_format(struct quota_format_type *fmt);
+void unregister_quota_format(struct quota_format_type *fmt);
+
+struct quota_module_name {
+	int qm_fmt_id;
+	char *qm_mod_name;
+};
+
+#define INIT_QUOTA_MODULE_NAMES {\
+	{QFMT_VFS_OLD, "quota_v1"},\
+	{QFMT_VFS_V0, "quota_v2"},\
+	{0, NULL}}
+
+#else
+
+# /* nodep */ include <sys/cdefs.h>
+
+__BEGIN_DECLS
+long quotactl __P ((unsigned int, const char *, int, caddr_t));
+__END_DECLS
+
+#endif /* __KERNEL__ */
+#endif /* _QUOTA_ */
diff --git a/include/linux/quotaio_v1.h b/include/linux/quotaio_v1.h
new file mode 100644
index 000000000000..746654b5de70
--- /dev/null
+++ b/include/linux/quotaio_v1.h
@@ -0,0 +1,33 @@
+#ifndef _LINUX_QUOTAIO_V1_H
+#define _LINUX_QUOTAIO_V1_H
+
+#include <linux/types.h>
+
+/*
+ * The following constants define the amount of time given a user
+ * before the soft limits are treated as hard limits (usually resulting
+ * in an allocation failure). The timer is started when the user crosses
+ * their soft limit, it is reset when they go below their soft limit.
+ */
+#define MAX_IQ_TIME  604800	/* (7*24*60*60) 1 week */
+#define MAX_DQ_TIME  604800	/* (7*24*60*60) 1 week */
+
+/*
+ * The following structure defines the format of the disk quota file
+ * (as it appears on disk) - the file is an array of these structures
+ * indexed by user or group number.
+ */
+struct v1_disk_dqblk {
+	__u32 dqb_bhardlimit;	/* absolute limit on disk blks alloc */
+	__u32 dqb_bsoftlimit;	/* preferred limit on disk blks */
+	__u32 dqb_curblocks;	/* current block count */
+	__u32 dqb_ihardlimit;	/* absolute limit on allocated inodes */
+	__u32 dqb_isoftlimit;	/* preferred inode limit */
+	__u32 dqb_curinodes;	/* current # allocated inodes */
+	time_t dqb_btime;	/* time limit for excessive disk use */
+	time_t dqb_itime;	/* time limit for excessive inode use */
+};
+
+#define v1_dqoff(UID)      ((loff_t)((UID) * sizeof (struct v1_disk_dqblk)))
+
+#endif	/* _LINUX_QUOTAIO_V1_H */
diff --git a/include/linux/quotaio_v2.h b/include/linux/quotaio_v2.h
new file mode 100644
index 000000000000..303d7cbe30d4
--- /dev/null
+++ b/include/linux/quotaio_v2.h
@@ -0,0 +1,79 @@
+/*
+ *	Definitions of structures for vfsv0 quota format
+ */
+
+#ifndef _LINUX_QUOTAIO_V2_H
+#define _LINUX_QUOTAIO_V2_H
+
+#include <linux/types.h>
+#include <linux/quota.h>
+
+/*
+ * Definitions of magics and versions of current quota files
+ */
+#define V2_INITQMAGICS {\
+	0xd9c01f11,	/* USRQUOTA */\
+	0xd9c01927	/* GRPQUOTA */\
+}
+
+#define V2_INITQVERSIONS {\
+	0,		/* USRQUOTA */\
+	0		/* GRPQUOTA */\
+}
+
+/*
+ * The following structure defines the format of the disk quota file
+ * (as it appears on disk) - the file is a radix tree whose leaves point
+ * to blocks of these structures.
+ */
+struct v2_disk_dqblk {
+	__le32 dqb_id;		/* id this quota applies to */
+	__le32 dqb_ihardlimit;	/* absolute limit on allocated inodes */
+	__le32 dqb_isoftlimit;	/* preferred inode limit */
+	__le32 dqb_curinodes;	/* current # allocated inodes */
+	__le32 dqb_bhardlimit;	/* absolute limit on disk space (in QUOTABLOCK_SIZE) */
+	__le32 dqb_bsoftlimit;	/* preferred limit on disk space (in QUOTABLOCK_SIZE) */
+	__le64 dqb_curspace;	/* current space occupied (in bytes) */
+	__le64 dqb_btime;	/* time limit for excessive disk use */
+	__le64 dqb_itime;	/* time limit for excessive inode use */
+};
+
+/*
+ * Here are header structures as written on disk and their in-memory copies
+ */
+/* First generic header */
+struct v2_disk_dqheader {
+	__le32 dqh_magic;	/* Magic number identifying file */
+	__le32 dqh_version;	/* File version */
+};
+
+/* Header with type and version specific information */
+struct v2_disk_dqinfo {
+	__le32 dqi_bgrace;	/* Time before block soft limit becomes hard limit */
+	__le32 dqi_igrace;	/* Time before inode soft limit becomes hard limit */
+	__le32 dqi_flags;	/* Flags for quotafile (DQF_*) */
+	__le32 dqi_blocks;	/* Number of blocks in file */
+	__le32 dqi_free_blk;	/* Number of first free block in the list */
+	__le32 dqi_free_entry;	/* Number of block with at least one free entry */
+};
+
+/*
+ *  Structure of header of block with quota structures. It is padded to 16 bytes so
+ *  there will be space for exactly 21 quota-entries in a block
+ */
+struct v2_disk_dqdbheader {
+	__le32 dqdh_next_free;	/* Number of next block with free entry */
+	__le32 dqdh_prev_free;	/* Number of previous block with free entry */
+	__le16 dqdh_entries;	/* Number of valid entries in block */
+	__le16 dqdh_pad1;
+	__le32 dqdh_pad2;
+};
+
+#define V2_DQINFOOFF	sizeof(struct v2_disk_dqheader)	/* Offset of info header in file */
+#define V2_DQBLKSIZE_BITS	10
+#define V2_DQBLKSIZE	(1 << V2_DQBLKSIZE_BITS)	/* Size of block with quota structures */
+#define V2_DQTREEOFF	1		/* Offset of tree in file in blocks */
+#define V2_DQTREEDEPTH	4		/* Depth of quota tree */
+#define V2_DQSTRINBLK	((V2_DQBLKSIZE - sizeof(struct v2_disk_dqdbheader)) / sizeof(struct v2_disk_dqblk))	/* Number of entries in one blocks */
+
+#endif /* _LINUX_QUOTAIO_V2_H */
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
new file mode 100644
index 000000000000..e57baa85e744
--- /dev/null
+++ b/include/linux/quotaops.h
@@ -0,0 +1,246 @@
+/*
+ * Definitions for diskquota-operations. When diskquota is configured these
+ * macros expand to the right source-code.
+ *
+ * Author:  Marco van Wieringen <mvw@planets.elm.net>
+ *
+ * Version: $Id: quotaops.h,v 1.2 1998/01/15 16:22:26 ecd Exp $
+ *
+ */
+#ifndef _LINUX_QUOTAOPS_
+#define _LINUX_QUOTAOPS_
+
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+
+#include <linux/fs.h>
+
+#if defined(CONFIG_QUOTA)
+
+/*
+ * declaration of quota_function calls in kernel.
+ */
+extern void sync_dquots(struct super_block *sb, int type);
+
+extern int dquot_initialize(struct inode *inode, int type);
+extern int dquot_drop(struct inode *inode);
+
+extern int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
+extern int dquot_alloc_inode(const struct inode *inode, unsigned long number);
+
+extern int dquot_free_space(struct inode *inode, qsize_t number);
+extern int dquot_free_inode(const struct inode *inode, unsigned long number);
+
+extern int dquot_transfer(struct inode *inode, struct iattr *iattr);
+extern int dquot_commit(struct dquot *dquot);
+extern int dquot_acquire(struct dquot *dquot);
+extern int dquot_release(struct dquot *dquot);
+extern int dquot_commit_info(struct super_block *sb, int type);
+extern int dquot_mark_dquot_dirty(struct dquot *dquot);
+
+extern int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path);
+extern int vfs_quota_on_mount(int type, int format_id, struct dentry *dentry);
+extern int vfs_quota_off(struct super_block *sb, int type);
+#define vfs_quota_off_mount(sb, type) vfs_quota_off(sb, type)
+extern int vfs_quota_sync(struct super_block *sb, int type);
+extern int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+extern int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+extern int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+extern int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+
+/*
+ * Operations supported for diskquotas.
+ */
+extern struct dquot_operations dquot_operations;
+extern struct quotactl_ops vfs_quotactl_ops;
+
+#define sb_dquot_ops (&dquot_operations)
+#define sb_quotactl_ops (&vfs_quotactl_ops)
+
+/* It is better to call this function outside of any transaction as it might
+ * need a lot of space in journal for dquot structure allocation. */
+static __inline__ void DQUOT_INIT(struct inode *inode)
+{
+	BUG_ON(!inode->i_sb);
+	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode))
+		inode->i_sb->dq_op->initialize(inode, -1);
+}
+
+/* The same as with DQUOT_INIT */
+static __inline__ void DQUOT_DROP(struct inode *inode)
+{
+	/* Here we can get arbitrary inode from clear_inode() so we have
+	 * to be careful. OTOH we don't need locking as quota operations
+	 * are allowed to change only at mount time */
+	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
+	    && inode->i_sb->dq_op->drop) {
+		int cnt;
+		/* Test before calling to rule out calls from proc and such
+                 * where we are not allowed to block. Note that this is
+		 * actually reliable test even without the lock - the caller
+		 * must assure that nobody can come after the DQUOT_DROP and
+		 * add quota pointers back anyway */
+		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+			if (inode->i_dquot[cnt] != NODQUOT)
+				break;
+		if (cnt < MAXQUOTAS)
+			inode->i_sb->dq_op->drop(inode);
+	}
+}
+
+/* The following allocation/freeing/transfer functions *must* be called inside
+ * a transaction (deadlocks possible otherwise) */
+static __inline__ int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	if (sb_any_quota_enabled(inode->i_sb)) {
+		/* Used space is updated in alloc_space() */
+		if (inode->i_sb->dq_op->alloc_space(inode, nr, 1) == NO_QUOTA)
+			return 1;
+	}
+	else
+		inode_add_bytes(inode, nr);
+	return 0;
+}
+
+static __inline__ int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+{
+	int ret;
+        if (!(ret =  DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr)))
+		mark_inode_dirty(inode);
+	return ret;
+}
+
+static __inline__ int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	if (sb_any_quota_enabled(inode->i_sb)) {
+		/* Used space is updated in alloc_space() */
+		if (inode->i_sb->dq_op->alloc_space(inode, nr, 0) == NO_QUOTA)
+			return 1;
+	}
+	else
+		inode_add_bytes(inode, nr);
+	return 0;
+}
+
+static __inline__ int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+{
+	int ret;
+	if (!(ret = DQUOT_ALLOC_SPACE_NODIRTY(inode, nr)))
+		mark_inode_dirty(inode);
+	return ret;
+}
+
+static __inline__ int DQUOT_ALLOC_INODE(struct inode *inode)
+{
+	if (sb_any_quota_enabled(inode->i_sb)) {
+		DQUOT_INIT(inode);
+		if (inode->i_sb->dq_op->alloc_inode(inode, 1) == NO_QUOTA)
+			return 1;
+	}
+	return 0;
+}
+
+static __inline__ void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	if (sb_any_quota_enabled(inode->i_sb))
+		inode->i_sb->dq_op->free_space(inode, nr);
+	else
+		inode_sub_bytes(inode, nr);
+}
+
+static __inline__ void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+{
+	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	mark_inode_dirty(inode);
+}
+
+static __inline__ void DQUOT_FREE_INODE(struct inode *inode)
+{
+	if (sb_any_quota_enabled(inode->i_sb))
+		inode->i_sb->dq_op->free_inode(inode, 1);
+}
+
+static __inline__ int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
+{
+	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
+		DQUOT_INIT(inode);
+		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
+			return 1;
+	}
+	return 0;
+}
+
+/* The following two functions cannot be called inside a transaction */
+#define DQUOT_SYNC(sb)	sync_dquots(sb, -1)
+
+static __inline__ int DQUOT_OFF(struct super_block *sb)
+{
+	int ret = -ENOSYS;
+
+	if (sb_any_quota_enabled(sb) && sb->s_qcop && sb->s_qcop->quota_off)
+		ret = sb->s_qcop->quota_off(sb, -1);
+	return ret;
+}
+
+#else
+
+/*
+ * NO-OP when quota not configured.
+ */
+#define sb_dquot_ops				(NULL)
+#define sb_quotactl_ops				(NULL)
+#define sync_dquots_dev(dev,type)		(NULL)
+#define DQUOT_INIT(inode)			do { } while(0)
+#define DQUOT_DROP(inode)			do { } while(0)
+#define DQUOT_ALLOC_INODE(inode)		(0)
+#define DQUOT_FREE_INODE(inode)			do { } while(0)
+#define DQUOT_SYNC(sb)				do { } while(0)
+#define DQUOT_OFF(sb)				do { } while(0)
+#define DQUOT_TRANSFER(inode, iattr)		(0)
+extern __inline__ int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	inode_add_bytes(inode, nr);
+	return 0;
+}
+
+extern __inline__ int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+{
+	DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr);
+	mark_inode_dirty(inode);
+	return 0;
+}
+
+extern __inline__ int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	inode_add_bytes(inode, nr);
+	return 0;
+}
+
+extern __inline__ int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+{
+	DQUOT_ALLOC_SPACE_NODIRTY(inode, nr);
+	mark_inode_dirty(inode);
+	return 0;
+}
+
+extern __inline__ void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+{
+	inode_sub_bytes(inode, nr);
+}
+
+extern __inline__ void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+{
+	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	mark_inode_dirty(inode);
+}	
+
+#endif /* CONFIG_QUOTA */
+
+#define DQUOT_PREALLOC_BLOCK_NODIRTY(inode, nr)	DQUOT_PREALLOC_SPACE_NODIRTY(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+#define DQUOT_PREALLOC_BLOCK(inode, nr)	DQUOT_PREALLOC_SPACE(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+#define DQUOT_ALLOC_BLOCK_NODIRTY(inode, nr) DQUOT_ALLOC_SPACE_NODIRTY(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+#define DQUOT_ALLOC_BLOCK(inode, nr) DQUOT_ALLOC_SPACE(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+#define DQUOT_FREE_BLOCK_NODIRTY(inode, nr) DQUOT_FREE_SPACE_NODIRTY(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+#define DQUOT_FREE_BLOCK(inode, nr) DQUOT_FREE_SPACE(inode, ((qsize_t)(nr)) << (inode)->i_sb->s_blocksize_bits)
+
+#endif /* _LINUX_QUOTAOPS_ */
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
new file mode 100644
index 000000000000..5bd8975ed78e
--- /dev/null
+++ b/include/linux/radeonfb.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_RADEONFB_H__
+#define __LINUX_RADEONFB_H__
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+#define ATY_RADEON_LCD_ON	0x00000001
+#define ATY_RADEON_CRT_ON	0x00000002
+
+
+#define FBIO_RADEON_GET_MIRROR	_IOR('@', 3, size_t)
+#define FBIO_RADEON_SET_MIRROR	_IOW('@', 4, size_t)
+
+#endif
+
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
new file mode 100644
index 000000000000..8081a281fa5e
--- /dev/null
+++ b/include/linux/radix-tree.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2001 Momchil Velikov
+ * Portions Copyright (C) 2001 Christoph Hellwig
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2, or (at
+ * your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _LINUX_RADIX_TREE_H
+#define _LINUX_RADIX_TREE_H
+
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+struct radix_tree_root {
+	unsigned int		height;
+	int			gfp_mask;
+	struct radix_tree_node	*rnode;
+};
+
+#define RADIX_TREE_INIT(mask)	{					\
+	.height = 0,							\
+	.gfp_mask = (mask),						\
+	.rnode = NULL,							\
+}
+
+#define RADIX_TREE(name, mask) \
+	struct radix_tree_root name = RADIX_TREE_INIT(mask)
+
+#define INIT_RADIX_TREE(root, mask)					\
+do {									\
+	(root)->height = 0;						\
+	(root)->gfp_mask = (mask);					\
+	(root)->rnode = NULL;						\
+} while (0)
+
+int radix_tree_insert(struct radix_tree_root *, unsigned long, void *);
+void *radix_tree_lookup(struct radix_tree_root *, unsigned long);
+void *radix_tree_delete(struct radix_tree_root *, unsigned long);
+unsigned int
+radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
+			unsigned long first_index, unsigned int max_items);
+int radix_tree_preload(int gfp_mask);
+void radix_tree_init(void);
+void *radix_tree_tag_set(struct radix_tree_root *root,
+			unsigned long index, int tag);
+void *radix_tree_tag_clear(struct radix_tree_root *root,
+			unsigned long index, int tag);
+int radix_tree_tag_get(struct radix_tree_root *root,
+			unsigned long index, int tag);
+unsigned int
+radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
+		unsigned long first_index, unsigned int max_items, int tag);
+int radix_tree_tagged(struct radix_tree_root *root, int tag);
+
+static inline void radix_tree_preload_end(void)
+{
+	preempt_enable();
+}
+
+#endif /* _LINUX_RADIX_TREE_H */
diff --git a/include/linux/raid/linear.h b/include/linux/raid/linear.h
new file mode 100644
index 000000000000..e04c4fe45b53
--- /dev/null
+++ b/include/linux/raid/linear.h
@@ -0,0 +1,27 @@
+#ifndef _LINEAR_H
+#define _LINEAR_H
+
+#include <linux/raid/md.h>
+
+struct dev_info {
+	mdk_rdev_t	*rdev;
+	sector_t	size;
+	sector_t	offset;
+};
+
+typedef struct dev_info dev_info_t;
+
+struct linear_private_data
+{
+	dev_info_t		**hash_table;
+	dev_info_t		*smallest;
+	int			nr_zones;
+	dev_info_t		disks[0];
+};
+
+
+typedef struct linear_private_data linear_conf_t;
+
+#define mddev_to_conf(mddev) ((linear_conf_t *) mddev->private)
+
+#endif
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
new file mode 100644
index 000000000000..a6a67d102bfa
--- /dev/null
+++ b/include/linux/raid/md.h
@@ -0,0 +1,84 @@
+/*
+   md.h : Multiple Devices driver for Linux
+          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
+          Copyright (C) 1994-96 Marc ZYNGIER
+	  <zyngier@ufr-info-p7.ibp.fr> or
+	  <maz@gloups.fdn.fr>
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_H
+#define _MD_H
+
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+#include <linux/major.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/hdreg.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+#include <net/checksum.h>
+#include <linux/random.h>
+#include <linux/kernel_stat.h>
+#include <asm/io.h>
+#include <linux/completion.h>
+#include <linux/mempool.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <linux/vmalloc.h>
+#include <linux/blkpg.h>
+#include <linux/bio.h>
+
+/*
+ * 'md_p.h' holds the 'physical' layout of RAID devices
+ * 'md_u.h' holds the user <=> kernel API
+ *
+ * 'md_k.h' holds kernel internal definitions
+ */
+
+#include <linux/raid/md_p.h>
+#include <linux/raid/md_u.h>
+#include <linux/raid/md_k.h>
+
+/*
+ * Different major versions are not compatible.
+ * Different minor versions are only downward compatible.
+ * Different patchlevel versions are downward and upward compatible.
+ */
+#define MD_MAJOR_VERSION                0
+#define MD_MINOR_VERSION                90
+#define MD_PATCHLEVEL_VERSION           1
+
+extern int register_md_personality (int p_num, mdk_personality_t *p);
+extern int unregister_md_personality (int p_num);
+extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev),
+				mddev_t *mddev, const char *name);
+extern void md_unregister_thread (mdk_thread_t *thread);
+extern void md_wakeup_thread(mdk_thread_t *thread);
+extern void md_check_recovery(mddev_t *mddev);
+extern void md_write_start(mddev_t *mddev);
+extern void md_write_end(mddev_t *mddev);
+extern void md_handle_safemode(mddev_t *mddev);
+extern void md_done_sync(mddev_t *mddev, int blocks, int ok);
+extern void md_error (mddev_t *mddev, mdk_rdev_t *rdev);
+extern void md_unplug_mddev(mddev_t *mddev);
+
+extern void md_print_devices (void);
+
+#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
+
+#endif 
+
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
new file mode 100644
index 000000000000..c9a0d4013be7
--- /dev/null
+++ b/include/linux/raid/md_k.h
@@ -0,0 +1,369 @@
+/*
+   md_k.h : kernel internal structure of the Linux MD driver
+          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_K_H
+#define _MD_K_H
+
+#define MD_RESERVED       0UL
+#define LINEAR            1UL
+#define RAID0             2UL
+#define RAID1             3UL
+#define RAID5             4UL
+#define TRANSLUCENT       5UL
+#define HSM               6UL
+#define MULTIPATH         7UL
+#define RAID6		  8UL
+#define	RAID10		  9UL
+#define FAULTY		  10UL
+#define MAX_PERSONALITY   11UL
+
+#define	LEVEL_MULTIPATH		(-4)
+#define	LEVEL_LINEAR		(-1)
+#define	LEVEL_FAULTY		(-5)
+
+#define MaxSector (~(sector_t)0)
+#define MD_THREAD_NAME_MAX 14
+
+static inline int pers_to_level (int pers)
+{
+	switch (pers) {
+		case FAULTY:		return LEVEL_FAULTY;
+		case MULTIPATH:		return LEVEL_MULTIPATH;
+		case HSM:		return -3;
+		case TRANSLUCENT:	return -2;
+		case LINEAR:		return LEVEL_LINEAR;
+		case RAID0:		return 0;
+		case RAID1:		return 1;
+		case RAID5:		return 5;
+		case RAID6:		return 6;
+		case RAID10:		return 10;
+	}
+	BUG();
+	return MD_RESERVED;
+}
+
+static inline int level_to_pers (int level)
+{
+	switch (level) {
+		case LEVEL_FAULTY: return FAULTY;
+		case LEVEL_MULTIPATH: return MULTIPATH;
+		case -3: return HSM;
+		case -2: return TRANSLUCENT;
+		case LEVEL_LINEAR: return LINEAR;
+		case 0: return RAID0;
+		case 1: return RAID1;
+		case 4:
+		case 5: return RAID5;
+		case 6: return RAID6;
+		case 10: return RAID10;
+	}
+	return MD_RESERVED;
+}
+
+typedef struct mddev_s mddev_t;
+typedef struct mdk_rdev_s mdk_rdev_t;
+
+#define MAX_MD_DEVS  256	/* Max number of md dev */
+
+/*
+ * options passed in raidrun:
+ */
+
+#define MAX_CHUNK_SIZE (4096*1024)
+
+/*
+ * default readahead
+ */
+
+static inline int disk_faulty(mdp_disk_t * d)
+{
+	return d->state & (1 << MD_DISK_FAULTY);
+}
+
+static inline int disk_active(mdp_disk_t * d)
+{
+	return d->state & (1 << MD_DISK_ACTIVE);
+}
+
+static inline int disk_sync(mdp_disk_t * d)
+{
+	return d->state & (1 << MD_DISK_SYNC);
+}
+
+static inline int disk_spare(mdp_disk_t * d)
+{
+	return !disk_sync(d) && !disk_active(d) && !disk_faulty(d);
+}
+
+static inline int disk_removed(mdp_disk_t * d)
+{
+	return d->state & (1 << MD_DISK_REMOVED);
+}
+
+static inline void mark_disk_faulty(mdp_disk_t * d)
+{
+	d->state |= (1 << MD_DISK_FAULTY);
+}
+
+static inline void mark_disk_active(mdp_disk_t * d)
+{
+	d->state |= (1 << MD_DISK_ACTIVE);
+}
+
+static inline void mark_disk_sync(mdp_disk_t * d)
+{
+	d->state |= (1 << MD_DISK_SYNC);
+}
+
+static inline void mark_disk_spare(mdp_disk_t * d)
+{
+	d->state = 0;
+}
+
+static inline void mark_disk_removed(mdp_disk_t * d)
+{
+	d->state = (1 << MD_DISK_FAULTY) | (1 << MD_DISK_REMOVED);
+}
+
+static inline void mark_disk_inactive(mdp_disk_t * d)
+{
+	d->state &= ~(1 << MD_DISK_ACTIVE);
+}
+
+static inline void mark_disk_nonsync(mdp_disk_t * d)
+{
+	d->state &= ~(1 << MD_DISK_SYNC);
+}
+
+/*
+ * MD's 'extended' device
+ */
+struct mdk_rdev_s
+{
+	struct list_head same_set;	/* RAID devices within the same set */
+
+	sector_t size;			/* Device size (in blocks) */
+	mddev_t *mddev;			/* RAID array if running */
+	unsigned long last_events;	/* IO event timestamp */
+
+	struct block_device *bdev;	/* block device handle */
+
+	struct page	*sb_page;
+	int		sb_loaded;
+	sector_t	data_offset;	/* start of data in array */
+	sector_t	sb_offset;
+	int		preferred_minor;	/* autorun support */
+
+	/* A device can be in one of three states based on two flags:
+	 * Not working:   faulty==1 in_sync==0
+	 * Fully working: faulty==0 in_sync==1
+	 * Working, but not
+	 * in sync with array
+	 *                faulty==0 in_sync==0
+	 *
+	 * It can never have faulty==1, in_sync==1
+	 * This reduces the burden of testing multiple flags in many cases
+	 */
+	int faulty;			/* if faulty do not issue IO requests */
+	int in_sync;			/* device is a full member of the array */
+
+	int desc_nr;			/* descriptor index in the superblock */
+	int raid_disk;			/* role of device in array */
+
+	atomic_t	nr_pending;	/* number of pending requests.
+					 * only maintained for arrays that
+					 * support hot removal
+					 */
+};
+
+typedef struct mdk_personality_s mdk_personality_t;
+
+struct mddev_s
+{
+	void				*private;
+	mdk_personality_t		*pers;
+	dev_t				unit;
+	int				md_minor;
+	struct list_head 		disks;
+	int				sb_dirty;
+	int				ro;
+
+	struct gendisk			*gendisk;
+
+	/* Superblock information */
+	int				major_version,
+					minor_version,
+					patch_version;
+	int				persistent;
+	int				chunk_size;
+	time_t				ctime, utime;
+	int				level, layout;
+	int				raid_disks;
+	int				max_disks;
+	sector_t			size; /* used size of component devices */
+	sector_t			array_size; /* exported array size */
+	__u64				events;
+
+	char				uuid[16];
+
+	struct mdk_thread_s		*thread;	/* management thread */
+	struct mdk_thread_s		*sync_thread;	/* doing resync or reconstruct */
+	sector_t			curr_resync;	/* blocks scheduled */
+	unsigned long			resync_mark;	/* a recent timestamp */
+	sector_t			resync_mark_cnt;/* blocks written at resync_mark */
+
+	sector_t			resync_max_sectors; /* may be set by personality */
+	/* recovery/resync flags 
+	 * NEEDED:   we might need to start a resync/recover
+	 * RUNNING:  a thread is running, or about to be started
+	 * SYNC:     actually doing a resync, not a recovery
+	 * ERR:      and IO error was detected - abort the resync/recovery
+	 * INTR:     someone requested a (clean) early abort.
+	 * DONE:     thread is done and is waiting to be reaped
+	 */
+#define	MD_RECOVERY_RUNNING	0
+#define	MD_RECOVERY_SYNC	1
+#define	MD_RECOVERY_ERR		2
+#define	MD_RECOVERY_INTR	3
+#define	MD_RECOVERY_DONE	4
+#define	MD_RECOVERY_NEEDED	5
+	unsigned long			recovery;
+
+	int				in_sync;	/* know to not need resync */
+	struct semaphore		reconfig_sem;
+	atomic_t			active;
+
+	int				changed;	/* true if we might need to reread partition info */
+	int				degraded;	/* whether md should consider
+							 * adding a spare
+							 */
+
+	atomic_t			recovery_active; /* blocks scheduled, but not written */
+	wait_queue_head_t		recovery_wait;
+	sector_t			recovery_cp;
+	unsigned int			safemode;	/* if set, update "clean" superblock
+							 * when no writes pending.
+							 */ 
+	unsigned int			safemode_delay;
+	struct timer_list		safemode_timer;
+	atomic_t			writes_pending; 
+	request_queue_t			*queue;	/* for plugging ... */
+
+	struct list_head		all_mddevs;
+};
+
+
+static inline void rdev_dec_pending(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+	int faulty = rdev->faulty;
+	if (atomic_dec_and_test(&rdev->nr_pending) && faulty)
+		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+}
+
+static inline void md_sync_acct(struct block_device *bdev, unsigned long nr_sectors)
+{
+        atomic_add(nr_sectors, &bdev->bd_contains->bd_disk->sync_io);
+}
+
+struct mdk_personality_s
+{
+	char *name;
+	struct module *owner;
+	int (*make_request)(request_queue_t *q, struct bio *bio);
+	int (*run)(mddev_t *mddev);
+	int (*stop)(mddev_t *mddev);
+	void (*status)(struct seq_file *seq, mddev_t *mddev);
+	/* error_handler must set ->faulty and clear ->in_sync
+	 * if appropriate, and should abort recovery if needed 
+	 */
+	void (*error_handler)(mddev_t *mddev, mdk_rdev_t *rdev);
+	int (*hot_add_disk) (mddev_t *mddev, mdk_rdev_t *rdev);
+	int (*hot_remove_disk) (mddev_t *mddev, int number);
+	int (*spare_active) (mddev_t *mddev);
+	int (*sync_request)(mddev_t *mddev, sector_t sector_nr, int go_faster);
+	int (*resize) (mddev_t *mddev, sector_t sectors);
+	int (*reshape) (mddev_t *mddev, int raid_disks);
+	int (*reconfig) (mddev_t *mddev, int layout, int chunk_size);
+};
+
+
+static inline char * mdname (mddev_t * mddev)
+{
+	return mddev->gendisk ? mddev->gendisk->disk_name : "mdX";
+}
+
+extern mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr);
+
+/*
+ * iterates through some rdev ringlist. It's safe to remove the
+ * current 'rdev'. Dont touch 'tmp' though.
+ */
+#define ITERATE_RDEV_GENERIC(head,rdev,tmp)				\
+									\
+	for ((tmp) = (head).next;					\
+		(rdev) = (list_entry((tmp), mdk_rdev_t, same_set)),	\
+			(tmp) = (tmp)->next, (tmp)->prev != &(head)	\
+		; )
+/*
+ * iterates through the 'same array disks' ringlist
+ */
+#define ITERATE_RDEV(mddev,rdev,tmp)					\
+	ITERATE_RDEV_GENERIC((mddev)->disks,rdev,tmp)
+
+/*
+ * Iterates through 'pending RAID disks'
+ */
+#define ITERATE_RDEV_PENDING(rdev,tmp)					\
+	ITERATE_RDEV_GENERIC(pending_raid_disks,rdev,tmp)
+
+typedef struct mdk_thread_s {
+	void			(*run) (mddev_t *mddev);
+	mddev_t			*mddev;
+	wait_queue_head_t	wqueue;
+	unsigned long           flags;
+	struct completion	*event;
+	struct task_struct	*tsk;
+	const char		*name;
+} mdk_thread_t;
+
+#define THREAD_WAKEUP  0
+
+#define __wait_event_lock_irq(wq, condition, lock, cmd) 		\
+do {									\
+	wait_queue_t __wait;						\
+	init_waitqueue_entry(&__wait, current);				\
+									\
+	add_wait_queue(&wq, &__wait);					\
+	for (;;) {							\
+		set_current_state(TASK_UNINTERRUPTIBLE);		\
+		if (condition)						\
+			break;						\
+		spin_unlock_irq(&lock);					\
+		cmd;							\
+		schedule();						\
+		spin_lock_irq(&lock);					\
+	}								\
+	current->state = TASK_RUNNING;					\
+	remove_wait_queue(&wq, &__wait);				\
+} while (0)
+
+#define wait_event_lock_irq(wq, condition, lock, cmd) 			\
+do {									\
+	if (condition)	 						\
+		break;							\
+	__wait_event_lock_irq(wq, condition, lock, cmd);		\
+} while (0)
+
+#endif
+
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
new file mode 100644
index 000000000000..8ba95d67329f
--- /dev/null
+++ b/include/linux/raid/md_p.h
@@ -0,0 +1,230 @@
+/*
+   md_p.h : physical layout of Linux RAID devices
+          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_P_H
+#define _MD_P_H
+
+/*
+ * RAID superblock.
+ *
+ * The RAID superblock maintains some statistics on each RAID configuration.
+ * Each real device in the RAID set contains it near the end of the device.
+ * Some of the ideas are copied from the ext2fs implementation.
+ *
+ * We currently use 4096 bytes as follows:
+ *
+ *	word offset	function
+ *
+ *	   0  -    31	Constant generic RAID device information.
+ *        32  -    63   Generic state information.
+ *	  64  -   127	Personality specific information.
+ *	 128  -   511	12 32-words descriptors of the disks in the raid set.
+ *	 512  -   911	Reserved.
+ *	 912  -  1023	Disk specific descriptor.
+ */
+
+/*
+ * If x is the real device size in bytes, we return an apparent size of:
+ *
+ *	y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
+ *
+ * and place the 4kB superblock at offset y.
+ */
+#define MD_RESERVED_BYTES		(64 * 1024)
+#define MD_RESERVED_SECTORS		(MD_RESERVED_BYTES / 512)
+#define MD_RESERVED_BLOCKS		(MD_RESERVED_BYTES / BLOCK_SIZE)
+
+#define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
+#define MD_NEW_SIZE_BLOCKS(x)		((x & ~(MD_RESERVED_BLOCKS - 1)) - MD_RESERVED_BLOCKS)
+
+#define MD_SB_BYTES			4096
+#define MD_SB_WORDS			(MD_SB_BYTES / 4)
+#define MD_SB_BLOCKS			(MD_SB_BYTES / BLOCK_SIZE)
+#define MD_SB_SECTORS			(MD_SB_BYTES / 512)
+
+/*
+ * The following are counted in 32-bit words
+ */
+#define	MD_SB_GENERIC_OFFSET		0
+#define MD_SB_PERSONALITY_OFFSET	64
+#define MD_SB_DISKS_OFFSET		128
+#define MD_SB_DESCRIPTOR_OFFSET		992
+
+#define MD_SB_GENERIC_CONSTANT_WORDS	32
+#define MD_SB_GENERIC_STATE_WORDS	32
+#define MD_SB_GENERIC_WORDS		(MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
+#define MD_SB_PERSONALITY_WORDS		64
+#define MD_SB_DESCRIPTOR_WORDS		32
+#define MD_SB_DISKS			27
+#define MD_SB_DISKS_WORDS		(MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_RESERVED_WORDS		(1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_EQUAL_WORDS		(MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
+
+/*
+ * Device "operational" state bits
+ */
+#define MD_DISK_FAULTY		0 /* disk is faulty / operational */
+#define MD_DISK_ACTIVE		1 /* disk is running or spare disk */
+#define MD_DISK_SYNC		2 /* disk is in sync with the raid set */
+#define MD_DISK_REMOVED		3 /* disk is in sync with the raid set */
+
+typedef struct mdp_device_descriptor_s {
+	__u32 number;		/* 0 Device number in the entire set	      */
+	__u32 major;		/* 1 Device major number		      */
+	__u32 minor;		/* 2 Device minor number		      */
+	__u32 raid_disk;	/* 3 The role of the device in the raid set   */
+	__u32 state;		/* 4 Operational state			      */
+	__u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
+} mdp_disk_t;
+
+#define MD_SB_MAGIC		0xa92b4efc
+
+/*
+ * Superblock state bits
+ */
+#define MD_SB_CLEAN		0
+#define MD_SB_ERRORS		1
+
+typedef struct mdp_superblock_s {
+	/*
+	 * Constant generic information
+	 */
+	__u32 md_magic;		/*  0 MD identifier 			      */
+	__u32 major_version;	/*  1 major version to which the set conforms */
+	__u32 minor_version;	/*  2 minor version ...			      */
+	__u32 patch_version;	/*  3 patchlevel version ...		      */
+	__u32 gvalid_words;	/*  4 Number of used words in this section    */
+	__u32 set_uuid0;	/*  5 Raid set identifier		      */
+	__u32 ctime;		/*  6 Creation time			      */
+	__u32 level;		/*  7 Raid personality			      */
+	__u32 size;		/*  8 Apparent size of each individual disk   */
+	__u32 nr_disks;		/*  9 total disks in the raid set	      */
+	__u32 raid_disks;	/* 10 disks in a fully functional raid set    */
+	__u32 md_minor;		/* 11 preferred MD minor device number	      */
+	__u32 not_persistent;	/* 12 does it have a persistent superblock    */
+	__u32 set_uuid1;	/* 13 Raid set identifier #2		      */
+	__u32 set_uuid2;	/* 14 Raid set identifier #3		      */
+	__u32 set_uuid3;	/* 15 Raid set identifier #4		      */
+	__u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
+
+	/*
+	 * Generic state information
+	 */
+	__u32 utime;		/*  0 Superblock update time		      */
+	__u32 state;		/*  1 State bits (clean, ...)		      */
+	__u32 active_disks;	/*  2 Number of currently active disks	      */
+	__u32 working_disks;	/*  3 Number of working disks		      */
+	__u32 failed_disks;	/*  4 Number of failed disks		      */
+	__u32 spare_disks;	/*  5 Number of spare disks		      */
+	__u32 sb_csum;		/*  6 checksum of the whole superblock        */
+#ifdef __BIG_ENDIAN
+	__u32 events_hi;	/*  7 high-order of superblock update count   */
+	__u32 events_lo;	/*  8 low-order of superblock update count    */
+	__u32 cp_events_hi;	/*  9 high-order of checkpoint update count   */
+	__u32 cp_events_lo;	/* 10 low-order of checkpoint update count    */
+#else
+	__u32 events_lo;	/*  7 low-order of superblock update count    */
+	__u32 events_hi;	/*  8 high-order of superblock update count   */
+	__u32 cp_events_lo;	/*  9 low-order of checkpoint update count    */
+	__u32 cp_events_hi;	/* 10 high-order of checkpoint update count   */
+#endif
+	__u32 recovery_cp;	/* 11 recovery checkpoint sector count	      */
+	__u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 12];
+
+	/*
+	 * Personality information
+	 */
+	__u32 layout;		/*  0 the array's physical layout	      */
+	__u32 chunk_size;	/*  1 chunk size in bytes		      */
+	__u32 root_pv;		/*  2 LV root PV */
+	__u32 root_block;	/*  3 LV root block */
+	__u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
+
+	/*
+	 * Disks information
+	 */
+	mdp_disk_t disks[MD_SB_DISKS];
+
+	/*
+	 * Reserved
+	 */
+	__u32 reserved[MD_SB_RESERVED_WORDS];
+
+	/*
+	 * Active descriptor
+	 */
+	mdp_disk_t this_disk;
+
+} mdp_super_t;
+
+static inline __u64 md_event(mdp_super_t *sb) {
+	__u64 ev = sb->events_hi;
+	return (ev<<32)| sb->events_lo;
+}
+
+/*
+ * The version-1 superblock :
+ * All numeric fields are little-endian.
+ *
+ * total size: 256 bytes plus 2 per device.
+ *  1K allows 384 devices.
+ */
+struct mdp_superblock_1 {
+	/* constant array information - 128 bytes */
+	__u32	magic;		/* MD_SB_MAGIC: 0xa92b4efc - little endian */
+	__u32	major_version;	/* 1 */
+	__u32	feature_map;	/* 0 for now */
+	__u32	pad0;		/* always set to 0 when writing */
+
+	__u8	set_uuid[16];	/* user-space generated. */
+	char	set_name[32];	/* set and interpreted by user-space */
+
+	__u64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
+	__u32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
+	__u32	layout;		/* only for raid5 currently */
+	__u64	size;		/* used size of component devices, in 512byte sectors */
+
+	__u32	chunksize;	/* in 512byte sectors */
+	__u32	raid_disks;
+	__u8	pad1[128-96];	/* set to 0 when written */
+
+	/* constant this-device information - 64 bytes */
+	__u64	data_offset;	/* sector start of data, often 0 */
+	__u64	data_size;	/* sectors in this device that can be used for data */
+	__u64	super_offset;	/* sector start of this superblock */
+	__u64	recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
+	__u32	dev_number;	/* permanent identifier of this  device - not role in raid */
+	__u32	cnt_corrected_read; /* number of read errors that were corrected by re-writing */
+	__u8	device_uuid[16]; /* user-space setable, ignored by kernel */
+	__u8	pad2[64-56];	/* set to 0 when writing */
+
+	/* array state information - 64 bytes */
+	__u64	utime;		/* 40 bits second, 24 btes microseconds */
+	__u64	events;		/* incremented when superblock updated */
+	__u64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
+	__u32	sb_csum;	/* checksum upto devs[max_dev] */
+	__u32	max_dev;	/* size of devs[] array to consider */
+	__u8	pad3[64-32];	/* set to 0 when writing */
+
+	/* device state information. Indexed by dev_number.
+	 * 2 bytes per device
+	 * Note there are no per-device state flags. State information is rolled
+	 * into the 'roles' value.  If a device is spare or faulty, then it doesn't
+	 * have a meaningful role.
+	 */
+	__u16	dev_roles[0];	/* role in array, or 0xffff for a spare, or 0xfffe for faulty */
+};
+
+#endif 
+
diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h
new file mode 100644
index 000000000000..a2df5c2a42af
--- /dev/null
+++ b/include/linux/raid/md_u.h
@@ -0,0 +1,117 @@
+/*
+   md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
+          Copyright (C) 1998 Ingo Molnar
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_U_H
+#define _MD_U_H
+
+/* ioctls */
+
+/* status */
+#define RAID_VERSION		_IOR (MD_MAJOR, 0x10, mdu_version_t)
+#define GET_ARRAY_INFO		_IOR (MD_MAJOR, 0x11, mdu_array_info_t)
+#define GET_DISK_INFO		_IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
+#define PRINT_RAID_DEBUG	_IO (MD_MAJOR, 0x13)
+#define RAID_AUTORUN		_IO (MD_MAJOR, 0x14)
+
+/* configuration */
+#define CLEAR_ARRAY		_IO (MD_MAJOR, 0x20)
+#define ADD_NEW_DISK		_IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
+#define HOT_REMOVE_DISK		_IO (MD_MAJOR, 0x22)
+#define SET_ARRAY_INFO		_IOW (MD_MAJOR, 0x23, mdu_array_info_t)
+#define SET_DISK_INFO		_IO (MD_MAJOR, 0x24)
+#define WRITE_RAID_INFO		_IO (MD_MAJOR, 0x25)
+#define UNPROTECT_ARRAY		_IO (MD_MAJOR, 0x26)
+#define PROTECT_ARRAY		_IO (MD_MAJOR, 0x27)
+#define HOT_ADD_DISK		_IO (MD_MAJOR, 0x28)
+#define SET_DISK_FAULTY		_IO (MD_MAJOR, 0x29)
+#define HOT_GENERATE_ERROR	_IO (MD_MAJOR, 0x2a)
+
+/* usage */
+#define RUN_ARRAY		_IOW (MD_MAJOR, 0x30, mdu_param_t)
+#define START_ARRAY		_IO (MD_MAJOR, 0x31)
+#define STOP_ARRAY		_IO (MD_MAJOR, 0x32)
+#define STOP_ARRAY_RO		_IO (MD_MAJOR, 0x33)
+#define RESTART_ARRAY_RW	_IO (MD_MAJOR, 0x34)
+
+typedef struct mdu_version_s {
+	int major;
+	int minor;
+	int patchlevel;
+} mdu_version_t;
+
+typedef struct mdu_array_info_s {
+	/*
+	 * Generic constant information
+	 */
+	int major_version;
+	int minor_version;
+	int patch_version;
+	int ctime;
+	int level;
+	int size;
+	int nr_disks;
+	int raid_disks;
+	int md_minor;
+	int not_persistent;
+
+	/*
+	 * Generic state information
+	 */
+	int utime;		/*  0 Superblock update time		      */
+	int state;		/*  1 State bits (clean, ...)		      */
+	int active_disks;	/*  2 Number of currently active disks	      */
+	int working_disks;	/*  3 Number of working disks		      */
+	int failed_disks;	/*  4 Number of failed disks		      */
+	int spare_disks;	/*  5 Number of spare disks		      */
+
+	/*
+	 * Personality information
+	 */
+	int layout;		/*  0 the array's physical layout	      */
+	int chunk_size;	/*  1 chunk size in bytes		      */
+
+} mdu_array_info_t;
+
+typedef struct mdu_disk_info_s {
+	/*
+	 * configuration/status of one particular disk
+	 */
+	int number;
+	int major;
+	int minor;
+	int raid_disk;
+	int state;
+
+} mdu_disk_info_t;
+
+typedef struct mdu_start_info_s {
+	/*
+	 * configuration/status of one particular disk
+	 */
+	int major;
+	int minor;
+	int raid_disk;
+	int state;
+
+} mdu_start_info_t;
+
+typedef struct mdu_param_s
+{
+	int			personality;	/* 1,2,3,4 */
+	int			chunk_size;	/* in bytes */
+	int			max_fault;	/* unused for now */
+} mdu_param_t;
+
+#endif 
+
diff --git a/include/linux/raid/multipath.h b/include/linux/raid/multipath.h
new file mode 100644
index 000000000000..6f53fc177a47
--- /dev/null
+++ b/include/linux/raid/multipath.h
@@ -0,0 +1,42 @@
+#ifndef _MULTIPATH_H
+#define _MULTIPATH_H
+
+#include <linux/raid/md.h>
+
+struct multipath_info {
+	mdk_rdev_t	*rdev;
+};
+
+struct multipath_private_data {
+	mddev_t			*mddev;
+	struct multipath_info	*multipaths;
+	int			raid_disks;
+	int			working_disks;
+	spinlock_t		device_lock;
+	struct list_head	retry_list;
+
+	mempool_t		*pool;
+};
+
+typedef struct multipath_private_data multipath_conf_t;
+
+/*
+ * this is the only point in the RAID code where we violate
+ * C type safety. mddev->private is an 'opaque' pointer.
+ */
+#define mddev_to_conf(mddev) ((multipath_conf_t *) mddev->private)
+
+/*
+ * this is our 'private' 'collective' MULTIPATH buffer head.
+ * it contains information about what kind of IO operations were started
+ * for this MULTIPATH operation, and about their status:
+ */
+
+struct multipath_bh {
+	mddev_t			*mddev;
+	struct bio		*master_bio;
+	struct bio		bio;
+	int			path;
+	struct list_head	retry_list;
+};
+#endif
diff --git a/include/linux/raid/raid0.h b/include/linux/raid/raid0.h
new file mode 100644
index 000000000000..1b2dda035f8e
--- /dev/null
+++ b/include/linux/raid/raid0.h
@@ -0,0 +1,30 @@
+#ifndef _RAID0_H
+#define _RAID0_H
+
+#include <linux/raid/md.h>
+
+struct strip_zone
+{
+	sector_t zone_offset;	/* Zone offset in md_dev */
+	sector_t dev_offset;	/* Zone offset in real dev */
+	sector_t size;		/* Zone size */
+	int nb_dev;		/* # of devices attached to the zone */
+	mdk_rdev_t **dev;	/* Devices attached to the zone */
+};
+
+struct raid0_private_data
+{
+	struct strip_zone **hash_table; /* Table of indexes into strip_zone */
+	struct strip_zone *strip_zone;
+	mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
+	int nr_strip_zones;
+
+	sector_t hash_spacing;
+	int preshift;			/* shift this before divide by hash_spacing */
+};
+
+typedef struct raid0_private_data raid0_conf_t;
+
+#define mddev_to_conf(mddev) ((raid0_conf_t *) mddev->private)
+
+#endif
diff --git a/include/linux/raid/raid1.h b/include/linux/raid/raid1.h
new file mode 100644
index 000000000000..abbfdd9afe1e
--- /dev/null
+++ b/include/linux/raid/raid1.h
@@ -0,0 +1,98 @@
+#ifndef _RAID1_H
+#define _RAID1_H
+
+#include <linux/raid/md.h>
+
+typedef struct mirror_info mirror_info_t;
+
+struct mirror_info {
+	mdk_rdev_t	*rdev;
+	sector_t	head_position;
+};
+
+/*
+ * memory pools need a pointer to the mddev, so they can force an unplug
+ * when memory is tight, and a count of the number of drives that the
+ * pool was allocated for, so they know how much to allocate and free.
+ * mddev->raid_disks cannot be used, as it can change while a pool is active
+ * These two datums are stored in a kmalloced struct.
+ */
+
+struct pool_info {
+	mddev_t *mddev;
+	int	raid_disks;
+};
+
+
+typedef struct r1bio_s r1bio_t;
+
+struct r1_private_data_s {
+	mddev_t			*mddev;
+	mirror_info_t		*mirrors;
+	int			raid_disks;
+	int			working_disks;
+	int			last_used;
+	sector_t		next_seq_sect;
+	spinlock_t		device_lock;
+
+	struct list_head	retry_list;
+	/* for use when syncing mirrors: */
+
+	spinlock_t		resync_lock;
+	int nr_pending;
+	int barrier;
+	sector_t		next_resync;
+
+	wait_queue_head_t	wait_idle;
+	wait_queue_head_t	wait_resume;
+
+	struct pool_info	*poolinfo;
+
+	mempool_t *r1bio_pool;
+	mempool_t *r1buf_pool;
+};
+
+typedef struct r1_private_data_s conf_t;
+
+/*
+ * this is the only point in the RAID code where we violate
+ * C type safety. mddev->private is an 'opaque' pointer.
+ */
+#define mddev_to_conf(mddev) ((conf_t *) mddev->private)
+
+/*
+ * this is our 'private' RAID1 bio.
+ *
+ * it contains information about what kind of IO operations were started
+ * for this RAID1 operation, and about their status:
+ */
+
+struct r1bio_s {
+	atomic_t		remaining; /* 'have we finished' count,
+					    * used from IRQ handlers
+					    */
+	sector_t		sector;
+	int			sectors;
+	unsigned long		state;
+	mddev_t			*mddev;
+	/*
+	 * original bio going to /dev/mdx
+	 */
+	struct bio		*master_bio;
+	/*
+	 * if the IO is in READ direction, then this is where we read
+	 */
+	int			read_disk;
+
+	struct list_head	retry_list;
+	/*
+	 * if the IO is in WRITE direction, then multiple bios are used.
+	 * We choose the number when they are allocated.
+	 */
+	struct bio		*bios[0];
+};
+
+/* bits for r1bio.state */
+#define	R1BIO_Uptodate	0
+#define	R1BIO_IsSync	1
+#endif
diff --git a/include/linux/raid/raid10.h b/include/linux/raid/raid10.h
new file mode 100644
index 000000000000..60708789c8f9
--- /dev/null
+++ b/include/linux/raid/raid10.h
@@ -0,0 +1,103 @@
+#ifndef _RAID10_H
+#define _RAID10_H
+
+#include <linux/raid/md.h>
+
+typedef struct mirror_info mirror_info_t;
+
+struct mirror_info {
+	mdk_rdev_t	*rdev;
+	sector_t	head_position;
+};
+
+typedef struct r10bio_s r10bio_t;
+
+struct r10_private_data_s {
+	mddev_t			*mddev;
+	mirror_info_t		*mirrors;
+	int			raid_disks;
+	int			working_disks;
+	spinlock_t		device_lock;
+
+	/* geometry */
+	int			near_copies;  /* number of copies layed out raid0 style */
+	int 			far_copies;   /* number of copies layed out
+					       * at large strides across drives
+					       */
+	int			copies;	      /* near_copies * far_copies.
+					       * must be <= raid_disks
+					       */
+	sector_t		stride;	      /* distance between far copies.
+					       * This is size / far_copies
+					       */
+
+	int chunk_shift; /* shift from chunks to sectors */
+	sector_t chunk_mask;
+
+	struct list_head	retry_list;
+	/* for use when syncing mirrors: */
+
+	spinlock_t		resync_lock;
+	int nr_pending;
+	int barrier;
+	sector_t		next_resync;
+
+	wait_queue_head_t	wait_idle;
+	wait_queue_head_t	wait_resume;
+
+	mempool_t *r10bio_pool;
+	mempool_t *r10buf_pool;
+};
+
+typedef struct r10_private_data_s conf_t;
+
+/*
+ * this is the only point in the RAID code where we violate
+ * C type safety. mddev->private is an 'opaque' pointer.
+ */
+#define mddev_to_conf(mddev) ((conf_t *) mddev->private)
+
+/*
+ * this is our 'private' RAID10 bio.
+ *
+ * it contains information about what kind of IO operations were started
+ * for this RAID10 operation, and about their status:
+ */
+
+struct r10bio_s {
+	atomic_t		remaining; /* 'have we finished' count,
+					    * used from IRQ handlers
+					    */
+	sector_t		sector;	/* virtual sector number */
+	int			sectors;
+	unsigned long		state;
+	mddev_t			*mddev;
+	/*
+	 * original bio going to /dev/mdx
+	 */
+	struct bio		*master_bio;
+	/*
+	 * if the IO is in READ direction, then this is where we read
+	 */
+	int			read_slot;
+
+	struct list_head	retry_list;
+	/*
+	 * if the IO is in WRITE direction, then multiple bios are used,
+	 * one for each copy.
+	 * When resyncing we also use one for each copy.
+	 * When reconstructing, we use 2 bios, one for read, one for write.
+	 * We choose the number when they are allocated.
+	 */
+	struct {
+		struct bio		*bio;
+		sector_t addr;
+		int devnum;
+	} devs[0];
+};
+
+/* bits for r10bio.state */
+#define	R10BIO_Uptodate	0
+#define	R10BIO_IsSync	1
+#define	R10BIO_IsRecover 2
+#endif
diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h
new file mode 100644
index 000000000000..d63ddcb4afad
--- /dev/null
+++ b/include/linux/raid/raid5.h
@@ -0,0 +1,243 @@
+#ifndef _RAID5_H
+#define _RAID5_H
+
+#include <linux/raid/md.h>
+#include <linux/raid/xor.h>
+
+/*
+ *
+ * Each stripe contains one buffer per disc.  Each buffer can be in
+ * one of a number of states stored in "flags".  Changes between
+ * these states happen *almost* exclusively under a per-stripe
+ * spinlock.  Some very specific changes can happen in bi_end_io, and
+ * these are not protected by the spin lock.
+ *
+ * The flag bits that are used to represent these states are:
+ *   R5_UPTODATE and R5_LOCKED
+ *
+ * State Empty == !UPTODATE, !LOCK
+ *        We have no data, and there is no active request
+ * State Want == !UPTODATE, LOCK
+ *        A read request is being submitted for this block
+ * State Dirty == UPTODATE, LOCK
+ *        Some new data is in this buffer, and it is being written out
+ * State Clean == UPTODATE, !LOCK
+ *        We have valid data which is the same as on disc
+ *
+ * The possible state transitions are:
+ *
+ *  Empty -> Want   - on read or write to get old data for  parity calc
+ *  Empty -> Dirty  - on compute_parity to satisfy write/sync request.(RECONSTRUCT_WRITE)
+ *  Empty -> Clean  - on compute_block when computing a block for failed drive
+ *  Want  -> Empty  - on failed read
+ *  Want  -> Clean  - on successful completion of read request
+ *  Dirty -> Clean  - on successful completion of write request
+ *  Dirty -> Clean  - on failed write
+ *  Clean -> Dirty  - on compute_parity to satisfy write/sync (RECONSTRUCT or RMW)
+ *
+ * The Want->Empty, Want->Clean, Dirty->Clean, transitions
+ * all happen in b_end_io at interrupt time.
+ * Each sets the Uptodate bit before releasing the Lock bit.
+ * This leaves one multi-stage transition:
+ *    Want->Dirty->Clean
+ * This is safe because thinking that a Clean buffer is actually dirty
+ * will at worst delay some action, and the stripe will be scheduled
+ * for attention after the transition is complete.
+ *
+ * There is one possibility that is not covered by these states.  That
+ * is if one drive has failed and there is a spare being rebuilt.  We
+ * can't distinguish between a clean block that has been generated
+ * from parity calculations, and a clean block that has been
+ * successfully written to the spare ( or to parity when resyncing).
+ * To distingush these states we have a stripe bit STRIPE_INSYNC that
+ * is set whenever a write is scheduled to the spare, or to the parity
+ * disc if there is no spare.  A sync request clears this bit, and
+ * when we find it set with no buffers locked, we know the sync is
+ * complete.
+ *
+ * Buffers for the md device that arrive via make_request are attached
+ * to the appropriate stripe in one of two lists linked on b_reqnext.
+ * One list (bh_read) for read requests, one (bh_write) for write.
+ * There should never be more than one buffer on the two lists
+ * together, but we are not guaranteed of that so we allow for more.
+ *
+ * If a buffer is on the read list when the associated cache buffer is
+ * Uptodate, the data is copied into the read buffer and it's b_end_io
+ * routine is called.  This may happen in the end_request routine only
+ * if the buffer has just successfully been read.  end_request should
+ * remove the buffers from the list and then set the Uptodate bit on
+ * the buffer.  Other threads may do this only if they first check
+ * that the Uptodate bit is set.  Once they have checked that they may
+ * take buffers off the read queue.
+ *
+ * When a buffer on the write list is committed for write it is copied
+ * into the cache buffer, which is then marked dirty, and moved onto a
+ * third list, the written list (bh_written).  Once both the parity
+ * block and the cached buffer are successfully written, any buffer on
+ * a written list can be returned with b_end_io.
+ *
+ * The write list and read list both act as fifos.  The read list is
+ * protected by the device_lock.  The write and written lists are
+ * protected by the stripe lock.  The device_lock, which can be
+ * claimed while the stipe lock is held, is only for list
+ * manipulations and will only be held for a very short time.  It can
+ * be claimed from interrupts.
+ *
+ *
+ * Stripes in the stripe cache can be on one of two lists (or on
+ * neither).  The "inactive_list" contains stripes which are not
+ * currently being used for any request.  They can freely be reused
+ * for another stripe.  The "handle_list" contains stripes that need
+ * to be handled in some way.  Both of these are fifo queues.  Each
+ * stripe is also (potentially) linked to a hash bucket in the hash
+ * table so that it can be found by sector number.  Stripes that are
+ * not hashed must be on the inactive_list, and will normally be at
+ * the front.  All stripes start life this way.
+ *
+ * The inactive_list, handle_list and hash bucket lists are all protected by the
+ * device_lock.
+ *  - stripes on the inactive_list never have their stripe_lock held.
+ *  - stripes have a reference counter. If count==0, they are on a list.
+ *  - If a stripe might need handling, STRIPE_HANDLE is set.
+ *  - When refcount reaches zero, then if STRIPE_HANDLE it is put on
+ *    handle_list else inactive_list
+ *
+ * This, combined with the fact that STRIPE_HANDLE is only ever
+ * cleared while a stripe has a non-zero count means that if the
+ * refcount is 0 and STRIPE_HANDLE is set, then it is on the
+ * handle_list and if recount is 0 and STRIPE_HANDLE is not set, then
+ * the stripe is on inactive_list.
+ *
+ * The possible transitions are:
+ *  activate an unhashed/inactive stripe (get_active_stripe())
+ *     lockdev check-hash unlink-stripe cnt++ clean-stripe hash-stripe unlockdev
+ *  activate a hashed, possibly active stripe (get_active_stripe())
+ *     lockdev check-hash if(!cnt++)unlink-stripe unlockdev
+ *  attach a request to an active stripe (add_stripe_bh())
+ *     lockdev attach-buffer unlockdev
+ *  handle a stripe (handle_stripe())
+ *     lockstripe clrSTRIPE_HANDLE ... (lockdev check-buffers unlockdev) .. change-state .. record io needed unlockstripe schedule io
+ *  release an active stripe (release_stripe())
+ *     lockdev if (!--cnt) { if  STRIPE_HANDLE, add to handle_list else add to inactive-list } unlockdev
+ *
+ * The refcount counts each thread that have activated the stripe,
+ * plus raid5d if it is handling it, plus one for each active request
+ * on a cached buffer.
+ */
+
+struct stripe_head {
+	struct stripe_head	*hash_next, **hash_pprev; /* hash pointers */
+	struct list_head	lru;			/* inactive_list or handle_list */
+	struct raid5_private_data	*raid_conf;
+	sector_t		sector;			/* sector of this row */
+	int			pd_idx;			/* parity disk index */
+	unsigned long		state;			/* state flags */
+	atomic_t		count;			/* nr of active thread/requests */
+	spinlock_t		lock;
+	struct r5dev {
+		struct bio	req;
+		struct bio_vec	vec;
+		struct page	*page;
+		struct bio	*toread, *towrite, *written;
+		sector_t	sector;			/* sector of this page */
+		unsigned long	flags;
+	} dev[1]; /* allocated with extra space depending of RAID geometry */
+};
+/* Flags */
+#define	R5_UPTODATE	0	/* page contains current data */
+#define	R5_LOCKED	1	/* IO has been submitted on "req" */
+#define	R5_OVERWRITE	2	/* towrite covers whole page */
+/* and some that are internal to handle_stripe */
+#define	R5_Insync	3	/* rdev && rdev->in_sync at start */
+#define	R5_Wantread	4	/* want to schedule a read */
+#define	R5_Wantwrite	5
+#define	R5_Syncio	6	/* this io need to be accounted as resync io */
+#define	R5_Overlap	7	/* There is a pending overlapping request on this block */
+
+/*
+ * Write method
+ */
+#define RECONSTRUCT_WRITE	1
+#define READ_MODIFY_WRITE	2
+/* not a write method, but a compute_parity mode */
+#define	CHECK_PARITY		3
+
+/*
+ * Stripe state
+ */
+#define STRIPE_ERROR		1
+#define STRIPE_HANDLE		2
+#define	STRIPE_SYNCING		3
+#define	STRIPE_INSYNC		4
+#define	STRIPE_PREREAD_ACTIVE	5
+#define	STRIPE_DELAYED		6
+
+/*
+ * Plugging:
+ *
+ * To improve write throughput, we need to delay the handling of some
+ * stripes until there has been a chance that several write requests
+ * for the one stripe have all been collected.
+ * In particular, any write request that would require pre-reading
+ * is put on a "delayed" queue until there are no stripes currently
+ * in a pre-read phase.  Further, if the "delayed" queue is empty when
+ * a stripe is put on it then we "plug" the queue and do not process it
+ * until an unplug call is made. (the unplug_io_fn() is called).
+ *
+ * When preread is initiated on a stripe, we set PREREAD_ACTIVE and add
+ * it to the count of prereading stripes.
+ * When write is initiated, or the stripe refcnt == 0 (just in case) we
+ * clear the PREREAD_ACTIVE flag and decrement the count
+ * Whenever the delayed queue is empty and the device is not plugged, we
+ * move any strips from delayed to handle and clear the DELAYED flag and set PREREAD_ACTIVE.
+ * In stripe_handle, if we find pre-reading is necessary, we do it if
+ * PREREAD_ACTIVE is set, else we set DELAYED which will send it to the delayed queue.
+ * HANDLE gets cleared if stripe_handle leave nothing locked.
+ */
+ 
+
+struct disk_info {
+	mdk_rdev_t	*rdev;
+};
+
+struct raid5_private_data {
+	struct stripe_head	**stripe_hashtbl;
+	mddev_t			*mddev;
+	struct disk_info	*spare;
+	int			chunk_size, level, algorithm;
+	int			raid_disks, working_disks, failed_disks;
+	int			max_nr_stripes;
+
+	struct list_head	handle_list; /* stripes needing handling */
+	struct list_head	delayed_list; /* stripes that have plugged requests */
+	atomic_t		preread_active_stripes; /* stripes with scheduled io */
+
+	char			cache_name[20];
+	kmem_cache_t		*slab_cache; /* for allocating stripes */
+	/*
+	 * Free stripes pool
+	 */
+	atomic_t		active_stripes;
+	struct list_head	inactive_list;
+	wait_queue_head_t	wait_for_stripe;
+	wait_queue_head_t	wait_for_overlap;
+	int			inactive_blocked;	/* release of inactive stripes blocked,
+							 * waiting for 25% to be free
+							 */        
+	spinlock_t		device_lock;
+	struct disk_info	disks[0];
+};
+
+typedef struct raid5_private_data raid5_conf_t;
+
+#define mddev_to_conf(mddev) ((raid5_conf_t *) mddev->private)
+
+/*
+ * Our supported algorithms
+ */
+#define ALGORITHM_LEFT_ASYMMETRIC	0
+#define ALGORITHM_RIGHT_ASYMMETRIC	1
+#define ALGORITHM_LEFT_SYMMETRIC	2
+#define ALGORITHM_RIGHT_SYMMETRIC	3
+
+#endif
diff --git a/include/linux/raid/xor.h b/include/linux/raid/xor.h
new file mode 100644
index 000000000000..f0d67cbdea40
--- /dev/null
+++ b/include/linux/raid/xor.h
@@ -0,0 +1,23 @@
+#ifndef _XOR_H
+#define _XOR_H
+
+#include <linux/raid/md.h>
+
+#define MAX_XOR_BLOCKS 5
+
+extern void xor_block(unsigned int count, unsigned int bytes, void **ptr);
+
+struct xor_block_template {
+        struct xor_block_template *next;
+        const char *name;
+        int speed;
+	void (*do_2)(unsigned long, unsigned long *, unsigned long *);
+	void (*do_3)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *);
+	void (*do_4)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *, unsigned long *);
+	void (*do_5)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *, unsigned long *, unsigned long *);
+};
+
+#endif
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
new file mode 100644
index 000000000000..e0a4faa9610c
--- /dev/null
+++ b/include/linux/ramfs.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_RAMFS_H
+#define _LINUX_RAMFS_H
+
+struct inode *ramfs_get_inode(struct super_block *sb, int mode, dev_t dev);
+struct super_block *ramfs_get_sb(struct file_system_type *fs_type,
+	 int flags, const char *dev_name, void *data);
+
+extern struct file_operations ramfs_file_operations;
+extern struct vm_operations_struct generic_file_vm_ops;
+
+#endif
diff --git a/include/linux/random.h b/include/linux/random.h
new file mode 100644
index 000000000000..cc6703449916
--- /dev/null
+++ b/include/linux/random.h
@@ -0,0 +1,72 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _LINUX_RANDOM_H
+#define _LINUX_RANDOM_H
+
+#include <linux/ioctl.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count.  (Superuser only.) */
+#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool.  (Superuser only.) */
+#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
+
+/* 
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0.  (Superuser only.) */
+#define RNDZAPENTCNT	_IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters.  (Superuser only.) */
+#define RNDCLEARPOOL	_IO( 'R', 0x06 )
+
+struct rand_pool_info {
+	int	entropy_count;
+	int	buf_size;
+	__u32	buf[0];
+};
+
+/* Exported functions */
+
+#ifdef __KERNEL__
+
+extern void rand_initialize_irq(int irq);
+
+extern void add_input_randomness(unsigned int type, unsigned int code,
+				 unsigned int value);
+extern void add_interrupt_randomness(int irq);
+
+extern void get_random_bytes(void *buf, int nbytes);
+void generate_random_uuid(unsigned char uuid_out[16]);
+
+extern __u32 secure_ip_id(__u32 daddr);
+extern u32 secure_tcp_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport);
+extern u32 secure_tcpv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, 
+				       __u16 dport);
+extern __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr,
+					__u16 sport, __u16 dport);
+extern __u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr,
+					  __u16 sport, __u16 dport);
+
+#ifndef MODULE
+extern struct file_operations random_fops, urandom_fops;
+#endif
+
+unsigned int get_random_int(void);
+unsigned long randomize_range(unsigned long start, unsigned long end, unsigned long len);
+
+#endif /* __KERNEL___ */
+
+#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/linux/raw.h
new file mode 100644
index 000000000000..62d543e70603
--- /dev/null
+++ b/include/linux/raw.h
@@ -0,0 +1,18 @@
+#ifndef __LINUX_RAW_H
+#define __LINUX_RAW_H
+
+#include <linux/types.h>
+
+#define RAW_SETBIND	_IO( 0xac, 0 )
+#define RAW_GETBIND	_IO( 0xac, 1 )
+
+struct raw_config_request 
+{
+	int	raw_minor;
+	__u64	block_major;
+	__u64	block_minor;
+};
+
+#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
+
+#endif /* __LINUX_RAW_H */
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
new file mode 100644
index 000000000000..4b7cc4fe366d
--- /dev/null
+++ b/include/linux/rbtree.h
@@ -0,0 +1,141 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/include/linux/rbtree.h
+
+  To use rbtrees you'll have to implement your own insert and search cores.
+  This will avoid us to use callbacks and to drop drammatically performances.
+  I know it's not the cleaner way,  but in C (not in C++) to get
+  performances and genericity...
+
+  Some example of insert and search follows here. The search is a plain
+  normal search over an ordered tree. The insert instead must be implemented
+  int two steps: as first thing the code must insert the element in
+  order as a red leaf in the tree, then the support library function
+  rb_insert_color() must be called. Such function will do the
+  not trivial work to rebalance the rbtree if necessary.
+
+-----------------------------------------------------------------------
+static inline struct page * rb_search_page_cache(struct inode * inode,
+						 unsigned long offset)
+{
+	struct rb_node * n = inode->i_rb_page_cache.rb_node;
+	struct page * page;
+
+	while (n)
+	{
+		page = rb_entry(n, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			n = n->rb_left;
+		else if (offset > page->offset)
+			n = n->rb_right;
+		else
+			return page;
+	}
+	return NULL;
+}
+
+static inline struct page * __rb_insert_page_cache(struct inode * inode,
+						   unsigned long offset,
+						   struct rb_node * node)
+{
+	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
+	struct rb_node * parent = NULL;
+	struct page * page;
+
+	while (*p)
+	{
+		parent = *p;
+		page = rb_entry(parent, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			p = &(*p)->rb_left;
+		else if (offset > page->offset)
+			p = &(*p)->rb_right;
+		else
+			return page;
+	}
+
+	rb_link_node(node, parent, p);
+
+	return NULL;
+}
+
+static inline struct page * rb_insert_page_cache(struct inode * inode,
+						 unsigned long offset,
+						 struct rb_node * node)
+{
+	struct page * ret;
+	if ((ret = __rb_insert_page_cache(inode, offset, node)))
+		goto out;
+	rb_insert_color(node, &inode->i_rb_page_cache);
+ out:
+	return ret;
+}
+-----------------------------------------------------------------------
+*/
+
+#ifndef	_LINUX_RBTREE_H
+#define	_LINUX_RBTREE_H
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+struct rb_node
+{
+	struct rb_node *rb_parent;
+	int rb_color;
+#define	RB_RED		0
+#define	RB_BLACK	1
+	struct rb_node *rb_right;
+	struct rb_node *rb_left;
+};
+
+struct rb_root
+{
+	struct rb_node *rb_node;
+};
+
+#define RB_ROOT	(struct rb_root) { NULL, }
+#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
+
+extern void rb_insert_color(struct rb_node *, struct rb_root *);
+extern void rb_erase(struct rb_node *, struct rb_root *);
+
+/* Find logical next and previous nodes in a tree */
+extern struct rb_node *rb_next(struct rb_node *);
+extern struct rb_node *rb_prev(struct rb_node *);
+extern struct rb_node *rb_first(struct rb_root *);
+extern struct rb_node *rb_last(struct rb_root *);
+
+/* Fast replacement of a single node without remove/rebalance/add/rebalance */
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, 
+			    struct rb_root *root);
+
+static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
+				struct rb_node ** rb_link)
+{
+	node->rb_parent = parent;
+	node->rb_color = RB_RED;
+	node->rb_left = node->rb_right = NULL;
+
+	*rb_link = node;
+}
+
+#endif	/* _LINUX_RBTREE_H */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
new file mode 100644
index 000000000000..4d747433916b
--- /dev/null
+++ b/include/linux/rcupdate.h
@@ -0,0 +1,271 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2001
+ *
+ * Author: Dipankar Sarma <dipankar@in.ibm.com>
+ * 
+ * Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
+ * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
+ * Papers:
+ * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
+ * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ * 		http://lse.sourceforge.net/locking/rcupdate.html
+ *
+ */
+
+#ifndef __LINUX_RCUPDATE_H
+#define __LINUX_RCUPDATE_H
+
+#ifdef __KERNEL__
+
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+#include <linux/seqlock.h>
+
+/**
+ * struct rcu_head - callback structure for use with RCU
+ * @next: next update requests in a list
+ * @func: actual update function to call after the grace period.
+ */
+struct rcu_head {
+	struct rcu_head *next;
+	void (*func)(struct rcu_head *head);
+};
+
+#define RCU_HEAD_INIT(head) { .next = NULL, .func = NULL }
+#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT(head)
+#define INIT_RCU_HEAD(ptr) do { \
+       (ptr)->next = NULL; (ptr)->func = NULL; \
+} while (0)
+
+
+
+/* Global control variables for rcupdate callback mechanism. */
+struct rcu_ctrlblk {
+	long	cur;		/* Current batch number.                      */
+	long	completed;	/* Number of the last completed batch         */
+	int	next_pending;	/* Is the next batch already waiting?         */
+} ____cacheline_maxaligned_in_smp;
+
+/* Is batch a before batch b ? */
+static inline int rcu_batch_before(long a, long b)
+{
+        return (a - b) < 0;
+}
+
+/* Is batch a after batch b ? */
+static inline int rcu_batch_after(long a, long b)
+{
+        return (a - b) > 0;
+}
+
+/*
+ * Per-CPU data for Read-Copy UPdate.
+ * nxtlist - new callbacks are added here
+ * curlist - current batch for which quiescent cycle started if any
+ */
+struct rcu_data {
+	/* 1) quiescent state handling : */
+	long		quiescbatch;     /* Batch # for grace period */
+	int		passed_quiesc;	 /* User-mode/idle loop etc. */
+	int		qs_pending;	 /* core waits for quiesc state */
+
+	/* 2) batch handling */
+	long  	       	batch;           /* Batch # for current RCU batch */
+	struct rcu_head *nxtlist;
+	struct rcu_head **nxttail;
+	struct rcu_head *curlist;
+	struct rcu_head **curtail;
+	struct rcu_head *donelist;
+	struct rcu_head **donetail;
+	int cpu;
+};
+
+DECLARE_PER_CPU(struct rcu_data, rcu_data);
+DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
+extern struct rcu_ctrlblk rcu_ctrlblk;
+extern struct rcu_ctrlblk rcu_bh_ctrlblk;
+
+/*
+ * Increment the quiescent state counter.
+ * The counter is a bit degenerated: We do not need to know
+ * how many quiescent states passed, just if there was at least
+ * one since the start of the grace period. Thus just a flag.
+ */
+static inline void rcu_qsctr_inc(int cpu)
+{
+	struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+	rdp->passed_quiesc = 1;
+}
+static inline void rcu_bh_qsctr_inc(int cpu)
+{
+	struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
+	rdp->passed_quiesc = 1;
+}
+
+static inline int __rcu_pending(struct rcu_ctrlblk *rcp,
+						struct rcu_data *rdp)
+{
+	/* This cpu has pending rcu entries and the grace period
+	 * for them has completed.
+	 */
+	if (rdp->curlist && !rcu_batch_before(rcp->completed, rdp->batch))
+		return 1;
+
+	/* This cpu has no pending entries, but there are new entries */
+	if (!rdp->curlist && rdp->nxtlist)
+		return 1;
+
+	/* This cpu has finished callbacks to invoke */
+	if (rdp->donelist)
+		return 1;
+
+	/* The rcu core waits for a quiescent state from the cpu */
+	if (rdp->quiescbatch != rcp->cur || rdp->qs_pending)
+		return 1;
+
+	/* nothing to do */
+	return 0;
+}
+
+static inline int rcu_pending(int cpu)
+{
+	return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) ||
+		__rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu));
+}
+
+/**
+ * rcu_read_lock - mark the beginning of an RCU read-side critical section.
+ *
+ * When synchronize_kernel() is invoked on one CPU while other CPUs
+ * are within RCU read-side critical sections, then the
+ * synchronize_kernel() is guaranteed to block until after all the other
+ * CPUs exit their critical sections.  Similarly, if call_rcu() is invoked
+ * on one CPU while other CPUs are within RCU read-side critical
+ * sections, invocation of the corresponding RCU callback is deferred
+ * until after the all the other CPUs exit their critical sections.
+ *
+ * Note, however, that RCU callbacks are permitted to run concurrently
+ * with RCU read-side critical sections.  One way that this can happen
+ * is via the following sequence of events: (1) CPU 0 enters an RCU
+ * read-side critical section, (2) CPU 1 invokes call_rcu() to register
+ * an RCU callback, (3) CPU 0 exits the RCU read-side critical section,
+ * (4) CPU 2 enters a RCU read-side critical section, (5) the RCU
+ * callback is invoked.  This is legal, because the RCU read-side critical
+ * section that was running concurrently with the call_rcu() (and which
+ * therefore might be referencing something that the corresponding RCU
+ * callback would free up) has completed before the corresponding
+ * RCU callback is invoked.
+ *
+ * RCU read-side critical sections may be nested.  Any deferred actions
+ * will be deferred until the outermost RCU read-side critical section
+ * completes.
+ *
+ * It is illegal to block while in an RCU read-side critical section.
+ */
+#define rcu_read_lock()		preempt_disable()
+
+/**
+ * rcu_read_unlock - marks the end of an RCU read-side critical section.
+ *
+ * See rcu_read_lock() for more information.
+ */
+#define rcu_read_unlock()	preempt_enable()
+
+/*
+ * So where is rcu_write_lock()?  It does not exist, as there is no
+ * way for writers to lock out RCU readers.  This is a feature, not
+ * a bug -- this property is what provides RCU's performance benefits.
+ * Of course, writers must coordinate with each other.  The normal
+ * spinlock primitives work well for this, but any other technique may be
+ * used as well.  RCU does not care how the writers keep out of each
+ * others' way, as long as they do so.
+ */
+
+/**
+ * rcu_read_lock_bh - mark the beginning of a softirq-only RCU critical section
+ *
+ * This is equivalent of rcu_read_lock(), but to be used when updates
+ * are being done using call_rcu_bh(). Since call_rcu_bh() callbacks
+ * consider completion of a softirq handler to be a quiescent state,
+ * a process in RCU read-side critical section must be protected by
+ * disabling softirqs. Read-side critical sections in interrupt context
+ * can use just rcu_read_lock().
+ *
+ */
+#define rcu_read_lock_bh()	local_bh_disable()
+
+/*
+ * rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
+ *
+ * See rcu_read_lock_bh() for more information.
+ */
+#define rcu_read_unlock_bh()	local_bh_enable()
+
+/**
+ * rcu_dereference - fetch an RCU-protected pointer in an
+ * RCU read-side critical section.  This pointer may later
+ * be safely dereferenced.
+ *
+ * Inserts memory barriers on architectures that require them
+ * (currently only the Alpha), and, more importantly, documents
+ * exactly which pointers are protected by RCU.
+ */
+
+#define rcu_dereference(p)     ({ \
+				typeof(p) _________p1 = p; \
+				smp_read_barrier_depends(); \
+				(_________p1); \
+				})
+
+/**
+ * rcu_assign_pointer - assign (publicize) a pointer to a newly
+ * initialized structure that will be dereferenced by RCU read-side
+ * critical sections.  Returns the value assigned.
+ *
+ * Inserts memory barriers on architectures that require them
+ * (pretty much all of them other than x86), and also prevents
+ * the compiler from reordering the code that initializes the
+ * structure after the pointer assignment.  More importantly, this
+ * call documents which pointers will be dereferenced by RCU read-side
+ * code.
+ */
+
+#define rcu_assign_pointer(p, v)	({ \
+						smp_wmb(); \
+						(p) = (v); \
+					})
+
+extern void rcu_init(void);
+extern void rcu_check_callbacks(int cpu, int user);
+extern void rcu_restart_cpu(int cpu);
+
+/* Exported interfaces */
+extern void FASTCALL(call_rcu(struct rcu_head *head, 
+				void (*func)(struct rcu_head *head)));
+extern void FASTCALL(call_rcu_bh(struct rcu_head *head,
+				void (*func)(struct rcu_head *head)));
+extern void synchronize_kernel(void);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
new file mode 100644
index 000000000000..d60fafc8bdc5
--- /dev/null
+++ b/include/linux/reboot.h
@@ -0,0 +1,56 @@
+#ifndef _LINUX_REBOOT_H
+#define _LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define	LINUX_REBOOT_MAGIC1	0xfee1dead
+#define	LINUX_REBOOT_MAGIC2	672274793
+#define	LINUX_REBOOT_MAGIC2A	85072278
+#define	LINUX_REBOOT_MAGIC2B	369367448
+#define	LINUX_REBOOT_MAGIC2C	537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART     Restart system using default command and mode.
+ * HALT        Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF   Stop OS and remove all power from system, if possible.
+ * RESTART2    Restart system using given command string.
+ * SW_SUSPEND  Suspend system using software suspend if compiled in.
+ * KEXEC       Restart system using a previously loaded Linux kernel
+ */
+
+#define	LINUX_REBOOT_CMD_RESTART	0x01234567
+#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
+#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
+#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
+#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
+#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
+#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
+
+
+#ifdef __KERNEL__
+
+#include <linux/notifier.h>
+
+extern int register_reboot_notifier(struct notifier_block *);
+extern int unregister_reboot_notifier(struct notifier_block *);
+
+
+/*
+ * Architecture-specific implementations of sys_reboot commands.
+ */
+
+extern void machine_restart(char *cmd);
+extern void machine_halt(void);
+extern void machine_power_off(void);
+
+#endif
+
+#endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_acl.h b/include/linux/reiserfs_acl.h
new file mode 100644
index 000000000000..a57e973af0bd
--- /dev/null
+++ b/include/linux/reiserfs_acl.h
@@ -0,0 +1,89 @@
+#include <linux/init.h>
+#include <linux/posix_acl.h>
+#include <linux/xattr_acl.h>
+
+#define REISERFS_ACL_VERSION	0x0001
+
+typedef struct {
+	__u16		e_tag;
+	__u16		e_perm;
+	__u32		e_id;
+} reiserfs_acl_entry;
+
+typedef struct {
+	__u16		e_tag;
+	__u16		e_perm;
+} reiserfs_acl_entry_short;
+
+typedef struct {
+	__u32		a_version;
+} reiserfs_acl_header;
+
+static inline size_t reiserfs_acl_size(int count)
+{
+	if (count <= 4) {
+		return sizeof(reiserfs_acl_header) +
+		       count * sizeof(reiserfs_acl_entry_short);
+	} else {
+		return sizeof(reiserfs_acl_header) +
+		       4 * sizeof(reiserfs_acl_entry_short) +
+		       (count - 4) * sizeof(reiserfs_acl_entry);
+	}
+}
+
+static inline int reiserfs_acl_count(size_t size)
+{
+	ssize_t s;
+	size -= sizeof(reiserfs_acl_header);
+	s = size - 4 * sizeof(reiserfs_acl_entry_short);
+	if (s < 0) {
+		if (size % sizeof(reiserfs_acl_entry_short))
+			return -1;
+		return size / sizeof(reiserfs_acl_entry_short);
+	} else {
+		if (s % sizeof(reiserfs_acl_entry))
+			return -1;
+		return s / sizeof(reiserfs_acl_entry) + 4;
+	}
+}
+
+
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+struct posix_acl * reiserfs_get_acl(struct inode *inode, int type);
+int reiserfs_acl_chmod (struct inode *inode);
+int reiserfs_inherit_default_acl (struct inode *dir, struct dentry *dentry, struct inode *inode);
+int reiserfs_cache_default_acl (struct inode *dir);
+extern int reiserfs_xattr_posix_acl_init (void) __init;
+extern int reiserfs_xattr_posix_acl_exit (void);
+extern struct reiserfs_xattr_handler posix_acl_default_handler;
+extern struct reiserfs_xattr_handler posix_acl_access_handler;
+#else
+
+#define reiserfs_get_acl NULL
+#define reiserfs_cache_default_acl(inode) 0
+
+static inline int
+reiserfs_xattr_posix_acl_init (void)
+{
+    return 0;
+}
+
+static inline int
+reiserfs_xattr_posix_acl_exit (void)
+{
+    return 0;
+}
+
+static inline int
+reiserfs_acl_chmod (struct inode *inode)
+{
+    return 0;
+}
+
+static inline int
+reiserfs_inherit_default_acl (const struct inode *dir, struct dentry *dentry, struct inode *inode)
+{
+    return 0;
+}
+
+#endif
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
new file mode 100644
index 000000000000..bccff8b17dc4
--- /dev/null
+++ b/include/linux/reiserfs_fs.h
@@ -0,0 +1,2255 @@
+/*
+ * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
+ */
+
+				/* this file has an amazingly stupid
+                                   name, yura please fix it to be
+                                   reiserfs.h, and merge all the rest
+                                   of our .h files that are in this
+                                   directory into it.  */
+
+
+#ifndef _LINUX_REISER_FS_H
+#define _LINUX_REISER_FS_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <asm/unaligned.h>
+#include <linux/bitops.h>
+#include <linux/proc_fs.h>
+#include <linux/smp_lock.h>
+#include <linux/buffer_head.h>
+#include <linux/reiserfs_fs_i.h>
+#include <linux/reiserfs_fs_sb.h>
+#endif
+
+/*
+ *  include/linux/reiser_fs.h
+ *
+ *  Reiser File System constants and structures
+ *
+ */
+
+/* in reading the #defines, it may help to understand that they employ
+   the following abbreviations:
+
+   B = Buffer
+   I = Item header
+   H = Height within the tree (should be changed to LEV)
+   N = Number of the item in the node
+   STAT = stat data
+   DEH = Directory Entry Header
+   EC = Entry Count
+   E = Entry number
+   UL = Unsigned Long
+   BLKH = BLocK Header
+   UNFM = UNForMatted node
+   DC = Disk Child
+   P = Path
+
+   These #defines are named by concatenating these abbreviations,
+   where first comes the arguments, and last comes the return value,
+   of the macro.
+
+*/
+
+#define USE_INODE_GENERATION_COUNTER
+
+#define REISERFS_PREALLOCATE
+#define DISPLACE_NEW_PACKING_LOCALITIES
+#define PREALLOCATION_SIZE 9
+
+/* n must be power of 2 */
+#define _ROUND_UP(x,n) (((x)+(n)-1u) & ~((n)-1u))
+
+// to be ok for alpha and others we have to align structures to 8 byte
+// boundary.
+// FIXME: do not change 4 by anything else: there is code which relies on that
+#define ROUND_UP(x) _ROUND_UP(x,8LL)
+
+/* debug levels.  Right now, CONFIG_REISERFS_CHECK means print all debug
+** messages.
+*/
+#define REISERFS_DEBUG_CODE 5 /* extra messages to help find/debug errors */ 
+
+void reiserfs_warning (struct super_block *s, const char * fmt, ...);
+/* assertions handling */
+
+/** always check a condition and panic if it's false. */
+#define RASSERT( cond, format, args... )					\
+if( !( cond ) ) 								\
+  reiserfs_panic( NULL, "reiserfs[%i]: assertion " #cond " failed at "	\
+		  __FILE__ ":%i:%s: " format "\n",		\
+		  in_interrupt() ? -1 : current -> pid, __LINE__ , __FUNCTION__ , ##args )
+
+#if defined( CONFIG_REISERFS_CHECK )
+#define RFALSE( cond, format, args... ) RASSERT( !( cond ), format, ##args )
+#else
+#define RFALSE( cond, format, args... ) do {;} while( 0 )
+#endif
+
+#define CONSTF __attribute_const__
+/*
+ * Disk Data Structures
+ */
+
+/***************************************************************************/
+/*                             SUPER BLOCK                                 */
+/***************************************************************************/
+
+/*
+ * Structure of super block on disk, a version of which in RAM is often accessed as REISERFS_SB(s)->s_rs
+ * the version in RAM is part of a larger structure containing fields never written to disk.
+ */
+#define UNSET_HASH 0 // read_super will guess about, what hash names
+                     // in directories were sorted with
+#define TEA_HASH  1
+#define YURA_HASH 2
+#define R5_HASH   3
+#define DEFAULT_HASH R5_HASH
+
+
+struct journal_params {
+    __u32 jp_journal_1st_block;	      /* where does journal start from on its
+				       * device */
+    __u32 jp_journal_dev;	      /* journal device st_rdev */
+    __u32 jp_journal_size;	      /* size of the journal */
+    __u32 jp_journal_trans_max;	      /* max number of blocks in a transaction. */
+    __u32 jp_journal_magic; 	      /* random value made on fs creation (this
+				       * was sb_journal_block_count) */
+    __u32 jp_journal_max_batch;	      /* max number of blocks to batch into a
+				       * trans */
+    __u32 jp_journal_max_commit_age;  /* in seconds, how old can an async
+				       * commit be */
+    __u32 jp_journal_max_trans_age;   /* in seconds, how old can a transaction
+				       * be */
+};
+
+/* this is the super from 3.5.X, where X >= 10 */
+struct reiserfs_super_block_v1
+{
+    __u32 s_block_count;	   /* blocks count         */
+    __u32 s_free_blocks;           /* free blocks count    */
+    __u32 s_root_block;            /* root block number    */
+    struct journal_params s_journal;
+    __u16 s_blocksize;             /* block size */
+    __u16 s_oid_maxsize;	   /* max size of object id array, see
+				    * get_objectid() commentary  */
+    __u16 s_oid_cursize;	   /* current size of object id array */
+    __u16 s_umount_state;          /* this is set to 1 when filesystem was
+				    * umounted, to 2 - when not */    
+    char s_magic[10];              /* reiserfs magic string indicates that
+				    * file system is reiserfs:
+				    * "ReIsErFs" or "ReIsEr2Fs" or "ReIsEr3Fs" */
+    __u16 s_fs_state;	           /* it is set to used by fsck to mark which
+				    * phase of rebuilding is done */
+    __u32 s_hash_function_code;    /* indicate, what hash function is being use
+				    * to sort names in a directory*/
+    __u16 s_tree_height;           /* height of disk tree */
+    __u16 s_bmap_nr;               /* amount of bitmap blocks needed to address
+				    * each block of file system */
+    __u16 s_version;               /* this field is only reliable on filesystem
+				    * with non-standard journal */
+    __u16 s_reserved_for_journal;  /* size in blocks of journal area on main
+				    * device, we need to keep after
+				    * making fs with non-standard journal */	
+} __attribute__ ((__packed__));
+
+#define SB_SIZE_V1 (sizeof(struct reiserfs_super_block_v1))
+
+/* this is the on disk super block */
+struct reiserfs_super_block
+{
+    struct reiserfs_super_block_v1 s_v1;
+    __u32 s_inode_generation;
+    __u32 s_flags;                  /* Right now used only by inode-attributes, if enabled */
+    unsigned char s_uuid[16];       /* filesystem unique identifier */
+    unsigned char s_label[16];      /* filesystem volume label */
+    char s_unused[88] ;             /* zero filled by mkreiserfs and
+				     * reiserfs_convert_objectid_map_v1()
+				     * so any additions must be updated
+				     * there as well. */
+}  __attribute__ ((__packed__));
+
+#define SB_SIZE (sizeof(struct reiserfs_super_block))
+
+#define REISERFS_VERSION_1 0
+#define REISERFS_VERSION_2 2
+
+
+// on-disk super block fields converted to cpu form
+#define SB_DISK_SUPER_BLOCK(s) (REISERFS_SB(s)->s_rs)
+#define SB_V1_DISK_SUPER_BLOCK(s) (&(SB_DISK_SUPER_BLOCK(s)->s_v1))
+#define SB_BLOCKSIZE(s) \
+        le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_blocksize))
+#define SB_BLOCK_COUNT(s) \
+        le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_block_count))
+#define SB_FREE_BLOCKS(s) \
+        le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_free_blocks))
+#define SB_REISERFS_MAGIC(s) \
+        (SB_V1_DISK_SUPER_BLOCK(s)->s_magic)
+#define SB_ROOT_BLOCK(s) \
+        le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_root_block))
+#define SB_TREE_HEIGHT(s) \
+        le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_tree_height))
+#define SB_REISERFS_STATE(s) \
+        le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_umount_state))
+#define SB_VERSION(s) le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_version))
+#define SB_BMAP_NR(s) le16_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_bmap_nr))
+
+#define PUT_SB_BLOCK_COUNT(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_block_count = cpu_to_le32(val); } while (0)
+#define PUT_SB_FREE_BLOCKS(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_free_blocks = cpu_to_le32(val); } while (0)
+#define PUT_SB_ROOT_BLOCK(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_root_block = cpu_to_le32(val); } while (0)
+#define PUT_SB_TREE_HEIGHT(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_tree_height = cpu_to_le16(val); } while (0)
+#define PUT_SB_REISERFS_STATE(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_umount_state = cpu_to_le16(val); } while (0) 
+#define PUT_SB_VERSION(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_version = cpu_to_le16(val); } while (0)
+#define PUT_SB_BMAP_NR(s, val) \
+   do { SB_V1_DISK_SUPER_BLOCK(s)->s_bmap_nr = cpu_to_le16 (val); } while (0)
+
+
+#define SB_ONDISK_JP(s) (&SB_V1_DISK_SUPER_BLOCK(s)->s_journal)
+#define SB_ONDISK_JOURNAL_SIZE(s) \
+         le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_size))
+#define SB_ONDISK_JOURNAL_1st_BLOCK(s) \
+         le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_1st_block))
+#define SB_ONDISK_JOURNAL_DEVICE(s) \
+         le32_to_cpu ((SB_ONDISK_JP(s)->jp_journal_dev))
+#define SB_ONDISK_RESERVED_FOR_JOURNAL(s) \
+         le32_to_cpu ((SB_V1_DISK_SUPER_BLOCK(s)->s_reserved_for_journal))
+
+#define is_block_in_log_or_reserved_area(s, block) \
+         block >= SB_JOURNAL_1st_RESERVED_BLOCK(s) \
+         && block < SB_JOURNAL_1st_RESERVED_BLOCK(s) +  \
+         ((!is_reiserfs_jr(SB_DISK_SUPER_BLOCK(s)) ? \
+         SB_ONDISK_JOURNAL_SIZE(s) + 1 : SB_ONDISK_RESERVED_FOR_JOURNAL(s))) 
+
+
+
+				/* used by gcc */
+#define REISERFS_SUPER_MAGIC 0x52654973
+				/* used by file system utilities that
+                                   look at the superblock, etc. */
+#define REISERFS_SUPER_MAGIC_STRING "ReIsErFs"
+#define REISER2FS_SUPER_MAGIC_STRING "ReIsEr2Fs"
+#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs"
+
+int is_reiserfs_3_5 (struct reiserfs_super_block * rs);
+int is_reiserfs_3_6 (struct reiserfs_super_block * rs);
+int is_reiserfs_jr (struct reiserfs_super_block * rs);
+
+/* ReiserFS leaves the first 64k unused, so that partition labels have
+   enough space.  If someone wants to write a fancy bootloader that
+   needs more than 64k, let us know, and this will be increased in size.
+   This number must be larger than than the largest block size on any
+   platform, or code will break.  -Hans */
+#define REISERFS_DISK_OFFSET_IN_BYTES (64 * 1024)
+#define REISERFS_FIRST_BLOCK unused_define
+#define REISERFS_JOURNAL_OFFSET_IN_BYTES REISERFS_DISK_OFFSET_IN_BYTES
+
+/* the spot for the super in versions 3.5 - 3.5.10 (inclusive) */
+#define REISERFS_OLD_DISK_OFFSET_IN_BYTES (8 * 1024)
+
+// reiserfs internal error code (used by search_by_key adn fix_nodes))
+#define CARRY_ON      0
+#define REPEAT_SEARCH -1
+#define IO_ERROR      -2
+#define NO_DISK_SPACE -3
+#define NO_BALANCING_NEEDED  (-4)
+#define NO_MORE_UNUSED_CONTIGUOUS_BLOCKS (-5)
+#define QUOTA_EXCEEDED -6
+
+typedef __u32 b_blocknr_t;
+typedef __u32 unp_t;
+
+struct unfm_nodeinfo {
+    unp_t unfm_nodenum;
+    unsigned short unfm_freespace;
+};
+
+/* there are two formats of keys: 3.5 and 3.6
+ */
+#define KEY_FORMAT_3_5 0
+#define KEY_FORMAT_3_6 1
+
+/* there are two stat datas */
+#define STAT_DATA_V1 0
+#define STAT_DATA_V2 1
+
+
+static inline struct reiserfs_inode_info *REISERFS_I(const struct inode *inode)
+{
+	return container_of(inode, struct reiserfs_inode_info, vfs_inode);
+}
+
+static inline struct reiserfs_sb_info *REISERFS_SB(const struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+/** this says about version of key of all items (but stat data) the
+    object consists of */
+#define get_inode_item_key_version( inode )                                    \
+    ((REISERFS_I(inode)->i_flags & i_item_key_version_mask) ? KEY_FORMAT_3_6 : KEY_FORMAT_3_5)
+
+#define set_inode_item_key_version( inode, version )                           \
+         ({ if((version)==KEY_FORMAT_3_6)                                      \
+                REISERFS_I(inode)->i_flags |= i_item_key_version_mask;      \
+            else                                                               \
+                REISERFS_I(inode)->i_flags &= ~i_item_key_version_mask; })
+
+#define get_inode_sd_version(inode)                                            \
+    ((REISERFS_I(inode)->i_flags & i_stat_data_version_mask) ? STAT_DATA_V2 : STAT_DATA_V1)
+
+#define set_inode_sd_version(inode, version)                                   \
+         ({ if((version)==STAT_DATA_V2)                                        \
+                REISERFS_I(inode)->i_flags |= i_stat_data_version_mask;     \
+            else                                                               \
+                REISERFS_I(inode)->i_flags &= ~i_stat_data_version_mask; })
+
+/* This is an aggressive tail suppression policy, I am hoping it
+   improves our benchmarks. The principle behind it is that percentage
+   space saving is what matters, not absolute space saving.  This is
+   non-intuitive, but it helps to understand it if you consider that the
+   cost to access 4 blocks is not much more than the cost to access 1
+   block, if you have to do a seek and rotate.  A tail risks a
+   non-linear disk access that is significant as a percentage of total
+   time cost for a 4 block file and saves an amount of space that is
+   less significant as a percentage of space, or so goes the hypothesis.
+   -Hans */
+#define STORE_TAIL_IN_UNFM_S1(n_file_size,n_tail_size,n_block_size) \
+(\
+  (!(n_tail_size)) || \
+  (((n_tail_size) > MAX_DIRECT_ITEM_LEN(n_block_size)) || \
+   ( (n_file_size) >= (n_block_size) * 4 ) || \
+   ( ( (n_file_size) >= (n_block_size) * 3 ) && \
+     ( (n_tail_size) >=   (MAX_DIRECT_ITEM_LEN(n_block_size))/4) ) || \
+   ( ( (n_file_size) >= (n_block_size) * 2 ) && \
+     ( (n_tail_size) >=   (MAX_DIRECT_ITEM_LEN(n_block_size))/2) ) || \
+   ( ( (n_file_size) >= (n_block_size) ) && \
+     ( (n_tail_size) >=   (MAX_DIRECT_ITEM_LEN(n_block_size) * 3)/4) ) ) \
+)
+
+/* Another strategy for tails, this one means only create a tail if all the
+   file would fit into one DIRECT item.
+   Primary intention for this one is to increase performance by decreasing
+   seeking.
+*/   
+#define STORE_TAIL_IN_UNFM_S2(n_file_size,n_tail_size,n_block_size) \
+(\
+  (!(n_tail_size)) || \
+  (((n_file_size) > MAX_DIRECT_ITEM_LEN(n_block_size)) ) \
+)
+
+
+
+/*
+ * values for s_umount_state field
+ */
+#define REISERFS_VALID_FS    1
+#define REISERFS_ERROR_FS    2
+
+//
+// there are 5 item types currently
+//
+#define TYPE_STAT_DATA 0
+#define TYPE_INDIRECT 1
+#define TYPE_DIRECT 2
+#define TYPE_DIRENTRY 3 
+#define TYPE_MAXTYPE 3 
+#define TYPE_ANY 15 // FIXME: comment is required
+
+/***************************************************************************/
+/*                       KEY & ITEM HEAD                                   */
+/***************************************************************************/
+
+//
+// directories use this key as well as old files
+//
+struct offset_v1 {
+    __u32 k_offset;
+    __u32 k_uniqueness;
+} __attribute__ ((__packed__));
+
+struct offset_v2 {
+#ifdef __LITTLE_ENDIAN
+	    /* little endian version */
+	    __u64 k_offset:60;
+	    __u64 k_type: 4;
+#else
+	    /* big endian version */
+	    __u64 k_type: 4;
+	    __u64 k_offset:60;
+#endif
+} __attribute__ ((__packed__));
+
+#ifndef __LITTLE_ENDIAN
+typedef union {
+    struct offset_v2 offset_v2;
+    __u64 linear;
+} __attribute__ ((__packed__)) offset_v2_esafe_overlay;
+
+static inline __u16 offset_v2_k_type( const struct offset_v2 *v2 )
+{
+    offset_v2_esafe_overlay tmp = *(const offset_v2_esafe_overlay *)v2;
+    tmp.linear = le64_to_cpu( tmp.linear );
+    return (tmp.offset_v2.k_type <= TYPE_MAXTYPE)?tmp.offset_v2.k_type:TYPE_ANY;
+}
+ 
+static inline void set_offset_v2_k_type( struct offset_v2 *v2, int type )
+{
+    offset_v2_esafe_overlay *tmp = (offset_v2_esafe_overlay *)v2;
+    tmp->linear = le64_to_cpu(tmp->linear);
+    tmp->offset_v2.k_type = type;
+    tmp->linear = cpu_to_le64(tmp->linear);
+}
+ 
+static inline loff_t offset_v2_k_offset( const struct offset_v2 *v2 )
+{
+    offset_v2_esafe_overlay tmp = *(const offset_v2_esafe_overlay *)v2;
+    tmp.linear = le64_to_cpu( tmp.linear );
+    return tmp.offset_v2.k_offset;
+}
+
+static inline void set_offset_v2_k_offset( struct offset_v2 *v2, loff_t offset ){
+    offset_v2_esafe_overlay *tmp = (offset_v2_esafe_overlay *)v2;
+    tmp->linear = le64_to_cpu(tmp->linear);
+    tmp->offset_v2.k_offset = offset;
+    tmp->linear = cpu_to_le64(tmp->linear);
+}
+#else
+# define offset_v2_k_type(v2)           ((v2)->k_type)
+# define set_offset_v2_k_type(v2,val)   (offset_v2_k_type(v2) = (val))
+# define offset_v2_k_offset(v2)         ((v2)->k_offset)
+# define set_offset_v2_k_offset(v2,val) (offset_v2_k_offset(v2) = (val))
+#endif
+
+/* Key of an item determines its location in the S+tree, and
+   is composed of 4 components */
+struct reiserfs_key {
+    __u32 k_dir_id;    /* packing locality: by default parent
+			  directory object id */
+    __u32 k_objectid;  /* object identifier */
+    union {
+	struct offset_v1 k_offset_v1;
+	struct offset_v2 k_offset_v2;
+    } __attribute__ ((__packed__)) u;
+} __attribute__ ((__packed__));
+
+
+struct cpu_key {
+    struct reiserfs_key on_disk_key;
+    int version;
+    int key_length; /* 3 in all cases but direct2indirect and
+		       indirect2direct conversion */
+};
+
+/* Our function for comparing keys can compare keys of different
+   lengths.  It takes as a parameter the length of the keys it is to
+   compare.  These defines are used in determining what is to be passed
+   to it as that parameter. */
+#define REISERFS_FULL_KEY_LEN     4
+#define REISERFS_SHORT_KEY_LEN    2
+
+/* The result of the key compare */
+#define FIRST_GREATER 1
+#define SECOND_GREATER -1
+#define KEYS_IDENTICAL 0
+#define KEY_FOUND 1
+#define KEY_NOT_FOUND 0
+
+#define KEY_SIZE (sizeof(struct reiserfs_key))
+#define SHORT_KEY_SIZE (sizeof (__u32) + sizeof (__u32))
+
+/* return values for search_by_key and clones */
+#define ITEM_FOUND 1
+#define ITEM_NOT_FOUND 0
+#define ENTRY_FOUND 1
+#define ENTRY_NOT_FOUND 0
+#define DIRECTORY_NOT_FOUND -1
+#define REGULAR_FILE_FOUND -2
+#define DIRECTORY_FOUND -3
+#define BYTE_FOUND 1
+#define BYTE_NOT_FOUND 0
+#define FILE_NOT_FOUND -1
+
+#define POSITION_FOUND 1
+#define POSITION_NOT_FOUND 0
+
+// return values for reiserfs_find_entry and search_by_entry_key
+#define NAME_FOUND 1
+#define NAME_NOT_FOUND 0
+#define GOTO_PREVIOUS_ITEM 2
+#define NAME_FOUND_INVISIBLE 3
+
+/*  Everything in the filesystem is stored as a set of items.  The
+    item head contains the key of the item, its free space (for
+    indirect items) and specifies the location of the item itself
+    within the block.  */
+
+struct item_head
+{
+	/* Everything in the tree is found by searching for it based on
+	 * its key.*/
+	struct reiserfs_key ih_key;
+	union {
+		/* The free space in the last unformatted node of an
+		   indirect item if this is an indirect item.  This
+		   equals 0xFFFF iff this is a direct item or stat data
+		   item. Note that the key, not this field, is used to
+		   determine the item type, and thus which field this
+		   union contains. */
+		__u16 ih_free_space_reserved; 
+		/* Iff this is a directory item, this field equals the
+		   number of directory entries in the directory item. */
+		__u16 ih_entry_count; 
+	} __attribute__ ((__packed__)) u;
+	__u16 ih_item_len;           /* total size of the item body */
+	__u16 ih_item_location;      /* an offset to the item body
+				      * within the block */
+	__u16 ih_version;	     /* 0 for all old items, 2 for new
+					ones. Highest bit is set by fsck
+					temporary, cleaned after all
+					done */
+} __attribute__ ((__packed__));
+/* size of item header     */
+#define IH_SIZE (sizeof(struct item_head))
+
+#define ih_free_space(ih)            le16_to_cpu((ih)->u.ih_free_space_reserved)
+#define ih_version(ih)               le16_to_cpu((ih)->ih_version)
+#define ih_entry_count(ih)           le16_to_cpu((ih)->u.ih_entry_count)
+#define ih_location(ih)              le16_to_cpu((ih)->ih_item_location)
+#define ih_item_len(ih)              le16_to_cpu((ih)->ih_item_len)
+
+#define put_ih_free_space(ih, val)   do { (ih)->u.ih_free_space_reserved = cpu_to_le16(val); } while(0)
+#define put_ih_version(ih, val)      do { (ih)->ih_version = cpu_to_le16(val); } while (0)
+#define put_ih_entry_count(ih, val)  do { (ih)->u.ih_entry_count = cpu_to_le16(val); } while (0)
+#define put_ih_location(ih, val)     do { (ih)->ih_item_location = cpu_to_le16(val); } while (0)
+#define put_ih_item_len(ih, val)     do { (ih)->ih_item_len = cpu_to_le16(val); } while (0)
+
+
+#define unreachable_item(ih) (ih_version(ih) & (1 << 15))
+
+#define get_ih_free_space(ih) (ih_version (ih) == KEY_FORMAT_3_6 ? 0 : ih_free_space (ih))
+#define set_ih_free_space(ih,val) put_ih_free_space((ih), ((ih_version(ih) == KEY_FORMAT_3_6) ? 0 : (val)))
+
+/* these operate on indirect items, where you've got an array of ints
+** at a possibly unaligned location.  These are a noop on ia32
+** 
+** p is the array of __u32, i is the index into the array, v is the value
+** to store there.
+*/
+#define get_block_num(p, i) le32_to_cpu(get_unaligned((p) + (i)))
+#define put_block_num(p, i, v) put_unaligned(cpu_to_le32(v), (p) + (i))
+
+//
+// in old version uniqueness field shows key type
+//
+#define V1_SD_UNIQUENESS 0
+#define V1_INDIRECT_UNIQUENESS 0xfffffffe
+#define V1_DIRECT_UNIQUENESS 0xffffffff
+#define V1_DIRENTRY_UNIQUENESS 500
+#define V1_ANY_UNIQUENESS 555 // FIXME: comment is required
+
+//
+// here are conversion routines
+//
+static inline int uniqueness2type (__u32 uniqueness) CONSTF;
+static inline int uniqueness2type (__u32 uniqueness)
+{
+    switch ((int)uniqueness) {
+    case V1_SD_UNIQUENESS: return TYPE_STAT_DATA;
+    case V1_INDIRECT_UNIQUENESS: return TYPE_INDIRECT;
+    case V1_DIRECT_UNIQUENESS: return TYPE_DIRECT;
+    case V1_DIRENTRY_UNIQUENESS: return TYPE_DIRENTRY;
+    default:
+	    reiserfs_warning (NULL, "vs-500: unknown uniqueness %d",
+			      uniqueness);
+	case V1_ANY_UNIQUENESS:
+	    return TYPE_ANY;
+    }
+}
+
+static inline __u32 type2uniqueness (int type) CONSTF;
+static inline __u32 type2uniqueness (int type)
+{
+    switch (type) {
+    case TYPE_STAT_DATA: return V1_SD_UNIQUENESS;
+    case TYPE_INDIRECT: return V1_INDIRECT_UNIQUENESS;
+    case TYPE_DIRECT: return V1_DIRECT_UNIQUENESS;
+    case TYPE_DIRENTRY: return V1_DIRENTRY_UNIQUENESS;
+    default:
+	    reiserfs_warning (NULL, "vs-501: unknown type %d", type);
+	case TYPE_ANY:
+	    return V1_ANY_UNIQUENESS;
+    }
+}
+
+//
+// key is pointer to on disk key which is stored in le, result is cpu,
+// there is no way to get version of object from key, so, provide
+// version to these defines
+//
+static inline loff_t le_key_k_offset (int version, const struct reiserfs_key * key)
+{
+    return (version == KEY_FORMAT_3_5) ?
+        le32_to_cpu( key->u.k_offset_v1.k_offset ) :
+	offset_v2_k_offset( &(key->u.k_offset_v2) );
+}
+
+static inline loff_t le_ih_k_offset (const struct item_head * ih)
+{
+    return le_key_k_offset (ih_version (ih), &(ih->ih_key));
+}
+
+static inline loff_t le_key_k_type (int version, const struct reiserfs_key * key)
+{
+    return (version == KEY_FORMAT_3_5) ?
+        uniqueness2type( le32_to_cpu( key->u.k_offset_v1.k_uniqueness)) :
+	offset_v2_k_type( &(key->u.k_offset_v2) );
+}
+
+static inline loff_t le_ih_k_type (const struct item_head * ih)
+{
+    return le_key_k_type (ih_version (ih), &(ih->ih_key));
+}
+
+
+static inline void set_le_key_k_offset (int version, struct reiserfs_key * key, loff_t offset)
+{
+    (version == KEY_FORMAT_3_5) ?
+        (void)(key->u.k_offset_v1.k_offset = cpu_to_le32 (offset)) : /* jdm check */
+	(void)(set_offset_v2_k_offset( &(key->u.k_offset_v2), offset ));
+}
+
+
+static inline void set_le_ih_k_offset (struct item_head * ih, loff_t offset)
+{
+    set_le_key_k_offset (ih_version (ih), &(ih->ih_key), offset);
+}
+
+
+static inline void set_le_key_k_type (int version, struct reiserfs_key * key, int type)
+{
+    (version == KEY_FORMAT_3_5) ?
+        (void)(key->u.k_offset_v1.k_uniqueness = cpu_to_le32(type2uniqueness(type))):
+	(void)(set_offset_v2_k_type( &(key->u.k_offset_v2), type ));
+}
+static inline void set_le_ih_k_type (struct item_head * ih, int type)
+{
+    set_le_key_k_type (ih_version (ih), &(ih->ih_key), type);
+}
+
+
+#define is_direntry_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRENTRY)
+#define is_direct_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRECT)
+#define is_indirect_le_key(version,key) (le_key_k_type (version, key) == TYPE_INDIRECT)
+#define is_statdata_le_key(version,key) (le_key_k_type (version, key) == TYPE_STAT_DATA)
+
+//
+// item header has version.
+//
+#define is_direntry_le_ih(ih) is_direntry_le_key (ih_version (ih), &((ih)->ih_key))
+#define is_direct_le_ih(ih) is_direct_le_key (ih_version (ih), &((ih)->ih_key))
+#define is_indirect_le_ih(ih) is_indirect_le_key (ih_version(ih), &((ih)->ih_key))
+#define is_statdata_le_ih(ih) is_statdata_le_key (ih_version (ih), &((ih)->ih_key))
+
+
+
+//
+// key is pointer to cpu key, result is cpu
+//
+static inline loff_t cpu_key_k_offset (const struct cpu_key * key)
+{
+    return (key->version == KEY_FORMAT_3_5) ?
+        key->on_disk_key.u.k_offset_v1.k_offset :
+	key->on_disk_key.u.k_offset_v2.k_offset;
+}
+
+static inline loff_t cpu_key_k_type (const struct cpu_key * key)
+{
+    return (key->version == KEY_FORMAT_3_5) ?
+        uniqueness2type (key->on_disk_key.u.k_offset_v1.k_uniqueness) :
+	key->on_disk_key.u.k_offset_v2.k_type;
+}
+
+static inline void set_cpu_key_k_offset (struct cpu_key * key, loff_t offset)
+{
+    (key->version == KEY_FORMAT_3_5) ?
+        (key->on_disk_key.u.k_offset_v1.k_offset = offset) :
+	(key->on_disk_key.u.k_offset_v2.k_offset = offset);
+}
+
+
+static inline void set_cpu_key_k_type (struct cpu_key * key, int type)
+{
+    (key->version == KEY_FORMAT_3_5) ?
+        (key->on_disk_key.u.k_offset_v1.k_uniqueness = type2uniqueness (type)):
+	(key->on_disk_key.u.k_offset_v2.k_type = type);
+}
+
+
+static inline void cpu_key_k_offset_dec (struct cpu_key * key)
+{
+    if (key->version == KEY_FORMAT_3_5)
+	key->on_disk_key.u.k_offset_v1.k_offset --;
+    else
+	key->on_disk_key.u.k_offset_v2.k_offset --;
+}
+
+
+#define is_direntry_cpu_key(key) (cpu_key_k_type (key) == TYPE_DIRENTRY)
+#define is_direct_cpu_key(key) (cpu_key_k_type (key) == TYPE_DIRECT)
+#define is_indirect_cpu_key(key) (cpu_key_k_type (key) == TYPE_INDIRECT)
+#define is_statdata_cpu_key(key) (cpu_key_k_type (key) == TYPE_STAT_DATA)
+
+
+/* are these used ? */
+#define is_direntry_cpu_ih(ih) (is_direntry_cpu_key (&((ih)->ih_key)))
+#define is_direct_cpu_ih(ih) (is_direct_cpu_key (&((ih)->ih_key)))
+#define is_indirect_cpu_ih(ih) (is_indirect_cpu_key (&((ih)->ih_key)))
+#define is_statdata_cpu_ih(ih) (is_statdata_cpu_key (&((ih)->ih_key)))
+
+
+
+
+
+#define I_K_KEY_IN_ITEM(p_s_ih, p_s_key, n_blocksize) \
+    ( ! COMP_SHORT_KEYS(p_s_ih, p_s_key) && \
+          I_OFF_BYTE_IN_ITEM(p_s_ih, k_offset (p_s_key), n_blocksize) )
+
+/* maximal length of item */ 
+#define MAX_ITEM_LEN(block_size) (block_size - BLKH_SIZE - IH_SIZE)
+#define MIN_ITEM_LEN 1
+
+
+/* object identifier for root dir */
+#define REISERFS_ROOT_OBJECTID 2
+#define REISERFS_ROOT_PARENT_OBJECTID 1
+extern struct reiserfs_key root_key;
+
+
+
+
+/* 
+ * Picture represents a leaf of the S+tree
+ *  ______________________________________________________
+ * |      |  Array of     |                   |           |
+ * |Block |  Object-Item  |      F r e e      |  Objects- |
+ * | head |  Headers      |     S p a c e     |   Items   |
+ * |______|_______________|___________________|___________|
+ */
+
+/* Header of a disk block.  More precisely, header of a formatted leaf
+   or internal node, and not the header of an unformatted node. */
+struct block_head {       
+  __u16 blk_level;        /* Level of a block in the tree. */
+  __u16 blk_nr_item;      /* Number of keys/items in a block. */
+  __u16 blk_free_space;   /* Block free space in bytes. */
+  __u16 blk_reserved;
+				/* dump this in v4/planA */
+  struct reiserfs_key  blk_right_delim_key; /* kept only for compatibility */
+};
+
+#define BLKH_SIZE                     (sizeof(struct block_head))
+#define blkh_level(p_blkh)            (le16_to_cpu((p_blkh)->blk_level))
+#define blkh_nr_item(p_blkh)          (le16_to_cpu((p_blkh)->blk_nr_item))
+#define blkh_free_space(p_blkh)       (le16_to_cpu((p_blkh)->blk_free_space))
+#define blkh_reserved(p_blkh)         (le16_to_cpu((p_blkh)->blk_reserved))
+#define set_blkh_level(p_blkh,val)    ((p_blkh)->blk_level = cpu_to_le16(val))
+#define set_blkh_nr_item(p_blkh,val)  ((p_blkh)->blk_nr_item = cpu_to_le16(val))
+#define set_blkh_free_space(p_blkh,val) ((p_blkh)->blk_free_space = cpu_to_le16(val))
+#define set_blkh_reserved(p_blkh,val) ((p_blkh)->blk_reserved = cpu_to_le16(val))
+#define blkh_right_delim_key(p_blkh)  ((p_blkh)->blk_right_delim_key)
+#define set_blkh_right_delim_key(p_blkh,val)  ((p_blkh)->blk_right_delim_key = val)
+
+/*
+ * values for blk_level field of the struct block_head
+ */
+
+#define FREE_LEVEL 0 /* when node gets removed from the tree its
+			blk_level is set to FREE_LEVEL. It is then
+			used to see whether the node is still in the
+			tree */
+
+#define DISK_LEAF_NODE_LEVEL  1 /* Leaf node level.*/
+
+/* Given the buffer head of a formatted node, resolve to the block head of that node. */
+#define B_BLK_HEAD(p_s_bh)            ((struct block_head *)((p_s_bh)->b_data))
+/* Number of items that are in buffer. */
+#define B_NR_ITEMS(p_s_bh)            (blkh_nr_item(B_BLK_HEAD(p_s_bh)))
+#define B_LEVEL(p_s_bh)               (blkh_level(B_BLK_HEAD(p_s_bh)))
+#define B_FREE_SPACE(p_s_bh)          (blkh_free_space(B_BLK_HEAD(p_s_bh)))
+
+#define PUT_B_NR_ITEMS(p_s_bh,val)    do { set_blkh_nr_item(B_BLK_HEAD(p_s_bh),val); } while (0)
+#define PUT_B_LEVEL(p_s_bh,val)       do { set_blkh_level(B_BLK_HEAD(p_s_bh),val); } while (0)
+#define PUT_B_FREE_SPACE(p_s_bh,val)  do { set_blkh_free_space(B_BLK_HEAD(p_s_bh),val); } while (0)
+
+
+/* Get right delimiting key. -- little endian */
+#define B_PRIGHT_DELIM_KEY(p_s_bh)   (&(blk_right_delim_key(B_BLK_HEAD(p_s_bh))
+
+/* Does the buffer contain a disk leaf. */
+#define B_IS_ITEMS_LEVEL(p_s_bh)     (B_LEVEL(p_s_bh) == DISK_LEAF_NODE_LEVEL)
+
+/* Does the buffer contain a disk internal node */
+#define B_IS_KEYS_LEVEL(p_s_bh)      (B_LEVEL(p_s_bh) > DISK_LEAF_NODE_LEVEL \
+                                            && B_LEVEL(p_s_bh) <= MAX_HEIGHT)
+
+
+
+
+/***************************************************************************/
+/*                             STAT DATA                                   */
+/***************************************************************************/
+
+
+//
+// old stat data is 32 bytes long. We are going to distinguish new one by
+// different size
+//
+struct stat_data_v1
+{
+    __u16 sd_mode;	/* file type, permissions */
+    __u16 sd_nlink;	/* number of hard links */
+    __u16 sd_uid;		/* owner */
+    __u16 sd_gid;		/* group */
+    __u32 sd_size;	/* file size */
+    __u32 sd_atime;	/* time of last access */
+    __u32 sd_mtime;	/* time file was last modified  */
+    __u32 sd_ctime;	/* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */
+    union {
+	__u32 sd_rdev;
+	__u32 sd_blocks;	/* number of blocks file uses */
+    } __attribute__ ((__packed__)) u;
+    __u32 sd_first_direct_byte; /* first byte of file which is stored
+				   in a direct item: except that if it
+				   equals 1 it is a symlink and if it
+				   equals ~(__u32)0 there is no
+				   direct item.  The existence of this
+				   field really grates on me. Let's
+				   replace it with a macro based on
+				   sd_size and our tail suppression
+				   policy.  Someday.  -Hans */
+} __attribute__ ((__packed__));
+
+#define SD_V1_SIZE              (sizeof(struct stat_data_v1))
+#define stat_data_v1(ih)        (ih_version (ih) == KEY_FORMAT_3_5)
+#define sd_v1_mode(sdp)         (le16_to_cpu((sdp)->sd_mode))
+#define set_sd_v1_mode(sdp,v)   ((sdp)->sd_mode = cpu_to_le16(v))
+#define sd_v1_nlink(sdp)        (le16_to_cpu((sdp)->sd_nlink))
+#define set_sd_v1_nlink(sdp,v)  ((sdp)->sd_nlink = cpu_to_le16(v))
+#define sd_v1_uid(sdp)          (le16_to_cpu((sdp)->sd_uid))
+#define set_sd_v1_uid(sdp,v)    ((sdp)->sd_uid = cpu_to_le16(v))
+#define sd_v1_gid(sdp)          (le16_to_cpu((sdp)->sd_gid))
+#define set_sd_v1_gid(sdp,v)    ((sdp)->sd_gid = cpu_to_le16(v))
+#define sd_v1_size(sdp)         (le32_to_cpu((sdp)->sd_size))
+#define set_sd_v1_size(sdp,v)   ((sdp)->sd_size = cpu_to_le32(v))
+#define sd_v1_atime(sdp)        (le32_to_cpu((sdp)->sd_atime))
+#define set_sd_v1_atime(sdp,v)  ((sdp)->sd_atime = cpu_to_le32(v))
+#define sd_v1_mtime(sdp)        (le32_to_cpu((sdp)->sd_mtime))
+#define set_sd_v1_mtime(sdp,v)  ((sdp)->sd_mtime = cpu_to_le32(v))
+#define sd_v1_ctime(sdp)        (le32_to_cpu((sdp)->sd_ctime))
+#define set_sd_v1_ctime(sdp,v)  ((sdp)->sd_ctime = cpu_to_le32(v))
+#define sd_v1_rdev(sdp)         (le32_to_cpu((sdp)->u.sd_rdev))
+#define set_sd_v1_rdev(sdp,v)   ((sdp)->u.sd_rdev = cpu_to_le32(v))
+#define sd_v1_blocks(sdp)       (le32_to_cpu((sdp)->u.sd_blocks))
+#define set_sd_v1_blocks(sdp,v) ((sdp)->u.sd_blocks = cpu_to_le32(v))
+#define sd_v1_first_direct_byte(sdp) \
+                                (le32_to_cpu((sdp)->sd_first_direct_byte))
+#define set_sd_v1_first_direct_byte(sdp,v) \
+                                ((sdp)->sd_first_direct_byte = cpu_to_le32(v))
+
+#include <linux/ext2_fs.h>
+
+/* inode flags stored in sd_attrs (nee sd_reserved) */
+
+/* we want common flags to have the same values as in ext2,
+   so chattr(1) will work without problems */
+#define REISERFS_IMMUTABLE_FL EXT2_IMMUTABLE_FL
+#define REISERFS_APPEND_FL    EXT2_APPEND_FL
+#define REISERFS_SYNC_FL      EXT2_SYNC_FL
+#define REISERFS_NOATIME_FL   EXT2_NOATIME_FL
+#define REISERFS_NODUMP_FL    EXT2_NODUMP_FL
+#define REISERFS_SECRM_FL     EXT2_SECRM_FL
+#define REISERFS_UNRM_FL      EXT2_UNRM_FL
+#define REISERFS_COMPR_FL     EXT2_COMPR_FL
+#define REISERFS_NOTAIL_FL    EXT2_NOTAIL_FL
+
+/* persistent flags that file inherits from the parent directory */
+#define REISERFS_INHERIT_MASK ( REISERFS_IMMUTABLE_FL |	\
+				REISERFS_SYNC_FL |	\
+				REISERFS_NOATIME_FL |	\
+				REISERFS_NODUMP_FL |	\
+				REISERFS_SECRM_FL |	\
+				REISERFS_COMPR_FL |	\
+				REISERFS_NOTAIL_FL )
+
+/* Stat Data on disk (reiserfs version of UFS disk inode minus the
+   address blocks) */
+struct stat_data {
+    __u16 sd_mode;	/* file type, permissions */
+    __u16 sd_attrs;     /* persistent inode flags */
+    __u32 sd_nlink;	/* number of hard links */
+    __u64 sd_size;	/* file size */
+    __u32 sd_uid;		/* owner */
+    __u32 sd_gid;		/* group */
+    __u32 sd_atime;	/* time of last access */
+    __u32 sd_mtime;	/* time file was last modified  */
+    __u32 sd_ctime;	/* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */
+    __u32 sd_blocks;
+    union {
+	__u32 sd_rdev;
+	__u32 sd_generation;
+      //__u32 sd_first_direct_byte; 
+      /* first byte of file which is stored in a
+				       direct item: except that if it equals 1
+				       it is a symlink and if it equals
+				       ~(__u32)0 there is no direct item.  The
+				       existence of this field really grates
+				       on me. Let's replace it with a macro
+				       based on sd_size and our tail
+				       suppression policy? */
+  } __attribute__ ((__packed__)) u;
+} __attribute__ ((__packed__));
+//
+// this is 44 bytes long
+//
+#define SD_SIZE (sizeof(struct stat_data))
+#define SD_V2_SIZE              SD_SIZE
+#define stat_data_v2(ih)        (ih_version (ih) == KEY_FORMAT_3_6)
+#define sd_v2_mode(sdp)         (le16_to_cpu((sdp)->sd_mode))
+#define set_sd_v2_mode(sdp,v)   ((sdp)->sd_mode = cpu_to_le16(v))
+/* sd_reserved */
+/* set_sd_reserved */
+#define sd_v2_nlink(sdp)        (le32_to_cpu((sdp)->sd_nlink))
+#define set_sd_v2_nlink(sdp,v)  ((sdp)->sd_nlink = cpu_to_le32(v))
+#define sd_v2_size(sdp)         (le64_to_cpu((sdp)->sd_size))
+#define set_sd_v2_size(sdp,v)   ((sdp)->sd_size = cpu_to_le64(v))
+#define sd_v2_uid(sdp)          (le32_to_cpu((sdp)->sd_uid))
+#define set_sd_v2_uid(sdp,v)    ((sdp)->sd_uid = cpu_to_le32(v))
+#define sd_v2_gid(sdp)          (le32_to_cpu((sdp)->sd_gid))
+#define set_sd_v2_gid(sdp,v)    ((sdp)->sd_gid = cpu_to_le32(v))
+#define sd_v2_atime(sdp)        (le32_to_cpu((sdp)->sd_atime))
+#define set_sd_v2_atime(sdp,v)  ((sdp)->sd_atime = cpu_to_le32(v))
+#define sd_v2_mtime(sdp)        (le32_to_cpu((sdp)->sd_mtime))
+#define set_sd_v2_mtime(sdp,v)  ((sdp)->sd_mtime = cpu_to_le32(v))
+#define sd_v2_ctime(sdp)        (le32_to_cpu((sdp)->sd_ctime))
+#define set_sd_v2_ctime(sdp,v)  ((sdp)->sd_ctime = cpu_to_le32(v))
+#define sd_v2_blocks(sdp)       (le32_to_cpu((sdp)->sd_blocks))
+#define set_sd_v2_blocks(sdp,v) ((sdp)->sd_blocks = cpu_to_le32(v))
+#define sd_v2_rdev(sdp)         (le32_to_cpu((sdp)->u.sd_rdev))
+#define set_sd_v2_rdev(sdp,v)   ((sdp)->u.sd_rdev = cpu_to_le32(v))
+#define sd_v2_generation(sdp)   (le32_to_cpu((sdp)->u.sd_generation))
+#define set_sd_v2_generation(sdp,v) ((sdp)->u.sd_generation = cpu_to_le32(v))
+#define sd_v2_attrs(sdp)         (le16_to_cpu((sdp)->sd_attrs))
+#define set_sd_v2_attrs(sdp,v)   ((sdp)->sd_attrs = cpu_to_le16(v))
+
+
+/***************************************************************************/
+/*                      DIRECTORY STRUCTURE                                */
+/***************************************************************************/
+/* 
+   Picture represents the structure of directory items
+   ________________________________________________
+   |  Array of     |   |     |        |       |   |
+   | directory     |N-1| N-2 | ....   |   1st |0th|
+   | entry headers |   |     |        |       |   |
+   |_______________|___|_____|________|_______|___|
+                    <----   directory entries         ------>
+
+ First directory item has k_offset component 1. We store "." and ".."
+ in one item, always, we never split "." and ".." into differing
+ items.  This makes, among other things, the code for removing
+ directories simpler. */
+#define SD_OFFSET  0
+#define SD_UNIQUENESS 0
+#define DOT_OFFSET 1
+#define DOT_DOT_OFFSET 2
+#define DIRENTRY_UNIQUENESS 500
+
+/* */
+#define FIRST_ITEM_OFFSET 1
+
+/*
+   Q: How to get key of object pointed to by entry from entry?  
+
+   A: Each directory entry has its header. This header has deh_dir_id and deh_objectid fields, those are key
+      of object, entry points to */
+
+/* NOT IMPLEMENTED:   
+   Directory will someday contain stat data of object */
+
+
+
+struct reiserfs_de_head
+{
+  __u32 deh_offset;		/* third component of the directory entry key */
+  __u32 deh_dir_id;		/* objectid of the parent directory of the object, that is referenced
+					   by directory entry */
+  __u32 deh_objectid;		/* objectid of the object, that is referenced by directory entry */
+  __u16 deh_location;		/* offset of name in the whole item */
+  __u16 deh_state;		/* whether 1) entry contains stat data (for future), and 2) whether
+					   entry is hidden (unlinked) */
+} __attribute__ ((__packed__));
+#define DEH_SIZE                  sizeof(struct reiserfs_de_head)
+#define deh_offset(p_deh)         (le32_to_cpu((p_deh)->deh_offset))
+#define deh_dir_id(p_deh)         (le32_to_cpu((p_deh)->deh_dir_id))
+#define deh_objectid(p_deh)       (le32_to_cpu((p_deh)->deh_objectid))
+#define deh_location(p_deh)       (le16_to_cpu((p_deh)->deh_location))
+#define deh_state(p_deh)          (le16_to_cpu((p_deh)->deh_state))
+
+#define put_deh_offset(p_deh,v)   ((p_deh)->deh_offset = cpu_to_le32((v)))
+#define put_deh_dir_id(p_deh,v)   ((p_deh)->deh_dir_id = cpu_to_le32((v)))
+#define put_deh_objectid(p_deh,v) ((p_deh)->deh_objectid = cpu_to_le32((v)))
+#define put_deh_location(p_deh,v) ((p_deh)->deh_location = cpu_to_le16((v)))
+#define put_deh_state(p_deh,v)    ((p_deh)->deh_state = cpu_to_le16((v)))
+
+/* empty directory contains two entries "." and ".." and their headers */
+#define EMPTY_DIR_SIZE \
+(DEH_SIZE * 2 + ROUND_UP (strlen (".")) + ROUND_UP (strlen ("..")))
+
+/* old format directories have this size when empty */
+#define EMPTY_DIR_SIZE_V1 (DEH_SIZE * 2 + 3)
+
+#define DEH_Statdata 0			/* not used now */
+#define DEH_Visible 2
+
+/* 64 bit systems (and the S/390) need to be aligned explicitly -jdm */
+#if BITS_PER_LONG == 64 || defined(__s390__) || defined(__hppa__)
+#   define ADDR_UNALIGNED_BITS  (3)
+#endif
+
+/* These are only used to manipulate deh_state.
+ * Because of this, we'll use the ext2_ bit routines,
+ * since they are little endian */
+#ifdef ADDR_UNALIGNED_BITS
+
+#   define aligned_address(addr)           ((void *)((long)(addr) & ~((1UL << ADDR_UNALIGNED_BITS) - 1)))
+#   define unaligned_offset(addr)          (((int)((long)(addr) & ((1 << ADDR_UNALIGNED_BITS) - 1))) << 3)
+
+#   define set_bit_unaligned(nr, addr)     ext2_set_bit((nr) + unaligned_offset(addr), aligned_address(addr))
+#   define clear_bit_unaligned(nr, addr)   ext2_clear_bit((nr) + unaligned_offset(addr), aligned_address(addr))
+#   define test_bit_unaligned(nr, addr)    ext2_test_bit((nr) + unaligned_offset(addr), aligned_address(addr))
+
+#else
+
+#   define set_bit_unaligned(nr, addr)     ext2_set_bit(nr, addr)
+#   define clear_bit_unaligned(nr, addr)   ext2_clear_bit(nr, addr)
+#   define test_bit_unaligned(nr, addr)    ext2_test_bit(nr, addr)
+
+#endif
+
+#define mark_de_with_sd(deh)        set_bit_unaligned (DEH_Statdata, &((deh)->deh_state))
+#define mark_de_without_sd(deh)     clear_bit_unaligned (DEH_Statdata, &((deh)->deh_state))
+#define mark_de_visible(deh)	    set_bit_unaligned (DEH_Visible, &((deh)->deh_state))
+#define mark_de_hidden(deh)	    clear_bit_unaligned (DEH_Visible, &((deh)->deh_state))
+
+#define de_with_sd(deh)		    test_bit_unaligned (DEH_Statdata, &((deh)->deh_state))
+#define de_visible(deh)	    	    test_bit_unaligned (DEH_Visible, &((deh)->deh_state))
+#define de_hidden(deh)	    	    !test_bit_unaligned (DEH_Visible, &((deh)->deh_state))
+
+extern void make_empty_dir_item_v1 (char * body, __u32 dirid, __u32 objid,
+				    __u32 par_dirid, __u32 par_objid);
+extern void make_empty_dir_item (char * body, __u32 dirid, __u32 objid,
+				 __u32 par_dirid, __u32 par_objid);
+
+/* array of the entry headers */
+ /* get item body */
+#define B_I_PITEM(bh,ih) ( (bh)->b_data + ih_location(ih) )
+#define B_I_DEH(bh,ih) ((struct reiserfs_de_head *)(B_I_PITEM(bh,ih)))
+
+/* length of the directory entry in directory item. This define
+   calculates length of i-th directory entry using directory entry
+   locations from dir entry head. When it calculates length of 0-th
+   directory entry, it uses length of whole item in place of entry
+   location of the non-existent following entry in the calculation.
+   See picture above.*/
+/*
+#define I_DEH_N_ENTRY_LENGTH(ih,deh,i) \
+((i) ? (deh_location((deh)-1) - deh_location((deh))) : (ih_item_len((ih)) - deh_location((deh))))
+*/
+static inline int entry_length (const struct buffer_head * bh, 
+								const struct item_head * ih, int pos_in_item)
+{
+    struct reiserfs_de_head * deh;
+
+    deh = B_I_DEH (bh, ih) + pos_in_item;
+    if (pos_in_item)
+	return deh_location(deh-1) - deh_location(deh);
+
+    return ih_item_len(ih) - deh_location(deh);
+}
+
+
+
+/* number of entries in the directory item, depends on ENTRY_COUNT being at the start of directory dynamic data. */
+#define I_ENTRY_COUNT(ih) (ih_entry_count((ih)))
+
+
+/* name by bh, ih and entry_num */
+#define B_I_E_NAME(bh,ih,entry_num) ((char *)(bh->b_data + ih_location(ih) + deh_location(B_I_DEH(bh,ih)+(entry_num))))
+
+// two entries per block (at least)
+#define REISERFS_MAX_NAME(block_size) 255
+
+
+/* this structure is used for operations on directory entries. It is
+   not a disk structure. */
+/* When reiserfs_find_entry or search_by_entry_key find directory
+   entry, they return filled reiserfs_dir_entry structure */
+struct reiserfs_dir_entry
+{
+  struct buffer_head * de_bh;
+  int de_item_num;
+  struct item_head * de_ih;
+  int de_entry_num;
+  struct reiserfs_de_head * de_deh;
+  int de_entrylen;
+  int de_namelen;
+  char * de_name;
+  char * de_gen_number_bit_string;
+
+  __u32 de_dir_id;
+  __u32 de_objectid;
+
+  struct cpu_key de_entry_key;
+};
+   
+/* these defines are useful when a particular member of a reiserfs_dir_entry is needed */
+
+/* pointer to file name, stored in entry */
+#define B_I_DEH_ENTRY_FILE_NAME(bh,ih,deh) (B_I_PITEM (bh, ih) + deh_location(deh))
+
+/* length of name */
+#define I_DEH_N_ENTRY_FILE_NAME_LENGTH(ih,deh,entry_num) \
+(I_DEH_N_ENTRY_LENGTH (ih, deh, entry_num) - (de_with_sd (deh) ? SD_SIZE : 0))
+
+
+
+/* hash value occupies bits from 7 up to 30 */
+#define GET_HASH_VALUE(offset) ((offset) & 0x7fffff80LL)
+/* generation number occupies 7 bits starting from 0 up to 6 */
+#define GET_GENERATION_NUMBER(offset) ((offset) & 0x7fLL)
+#define MAX_GENERATION_NUMBER  127
+
+#define SET_GENERATION_NUMBER(offset,gen_number) (GET_HASH_VALUE(offset)|(gen_number))
+
+
+/*
+ * Picture represents an internal node of the reiserfs tree
+ *  ______________________________________________________
+ * |      |  Array of     |  Array of         |  Free     |
+ * |block |    keys       |  pointers         | space     |
+ * | head |      N        |      N+1          |           |
+ * |______|_______________|___________________|___________|
+ */
+
+/***************************************************************************/
+/*                      DISK CHILD                                         */
+/***************************************************************************/
+/* Disk child pointer: The pointer from an internal node of the tree
+   to a node that is on disk. */
+struct disk_child {
+  __u32       dc_block_number;              /* Disk child's block number. */
+  __u16       dc_size;		            /* Disk child's used space.   */
+  __u16       dc_reserved;
+};
+
+#define DC_SIZE (sizeof(struct disk_child))
+#define dc_block_number(dc_p)	(le32_to_cpu((dc_p)->dc_block_number))
+#define dc_size(dc_p)		(le16_to_cpu((dc_p)->dc_size))
+#define put_dc_block_number(dc_p, val)   do { (dc_p)->dc_block_number = cpu_to_le32(val); } while(0)
+#define put_dc_size(dc_p, val)   do { (dc_p)->dc_size = cpu_to_le16(val); } while(0)
+
+/* Get disk child by buffer header and position in the tree node. */
+#define B_N_CHILD(p_s_bh,n_pos)  ((struct disk_child *)\
+((p_s_bh)->b_data+BLKH_SIZE+B_NR_ITEMS(p_s_bh)*KEY_SIZE+DC_SIZE*(n_pos)))
+
+/* Get disk child number by buffer header and position in the tree node. */
+#define B_N_CHILD_NUM(p_s_bh,n_pos) (dc_block_number(B_N_CHILD(p_s_bh,n_pos)))
+#define PUT_B_N_CHILD_NUM(p_s_bh,n_pos, val) (put_dc_block_number(B_N_CHILD(p_s_bh,n_pos), val ))
+
+ /* maximal value of field child_size in structure disk_child */ 
+ /* child size is the combined size of all items and their headers */
+#define MAX_CHILD_SIZE(bh) ((int)( (bh)->b_size - BLKH_SIZE ))
+
+/* amount of used space in buffer (not including block head) */
+#define B_CHILD_SIZE(cur) (MAX_CHILD_SIZE(cur)-(B_FREE_SPACE(cur)))
+
+/* max and min number of keys in internal node */
+#define MAX_NR_KEY(bh) ( (MAX_CHILD_SIZE(bh)-DC_SIZE)/(KEY_SIZE+DC_SIZE) )
+#define MIN_NR_KEY(bh)    (MAX_NR_KEY(bh)/2)
+
+/***************************************************************************/
+/*                      PATH STRUCTURES AND DEFINES                        */
+/***************************************************************************/
+
+
+/* Search_by_key fills up the path from the root to the leaf as it descends the tree looking for the
+   key.  It uses reiserfs_bread to try to find buffers in the cache given their block number.  If it
+   does not find them in the cache it reads them from disk.  For each node search_by_key finds using
+   reiserfs_bread it then uses bin_search to look through that node.  bin_search will find the
+   position of the block_number of the next node if it is looking through an internal node.  If it
+   is looking through a leaf node bin_search will find the position of the item which has key either
+   equal to given key, or which is the maximal key less than the given key. */
+
+struct  path_element  {
+  struct buffer_head *	pe_buffer;    /* Pointer to the buffer at the path in the tree. */
+  int         		pe_position;  /* Position in the tree node which is placed in the */
+                                      /* buffer above.                                  */
+};
+
+#define MAX_HEIGHT 5 /* maximal height of a tree. don't change this without changing JOURNAL_PER_BALANCE_CNT */
+#define EXTENDED_MAX_HEIGHT         7 /* Must be equals MAX_HEIGHT + FIRST_PATH_ELEMENT_OFFSET */
+#define FIRST_PATH_ELEMENT_OFFSET   2 /* Must be equal to at least 2. */
+
+#define ILLEGAL_PATH_ELEMENT_OFFSET 1 /* Must be equal to FIRST_PATH_ELEMENT_OFFSET - 1 */
+#define MAX_FEB_SIZE 6   /* this MUST be MAX_HEIGHT + 1. See about FEB below */
+
+
+
+/* We need to keep track of who the ancestors of nodes are.  When we
+   perform a search we record which nodes were visited while
+   descending the tree looking for the node we searched for. This list
+   of nodes is called the path.  This information is used while
+   performing balancing.  Note that this path information may become
+   invalid, and this means we must check it when using it to see if it
+   is still valid. You'll need to read search_by_key and the comments
+   in it, especially about decrement_counters_in_path(), to understand
+   this structure.  
+
+Paths make the code so much harder to work with and debug.... An
+enormous number of bugs are due to them, and trying to write or modify
+code that uses them just makes my head hurt.  They are based on an
+excessive effort to avoid disturbing the precious VFS code.:-( The
+gods only know how we are going to SMP the code that uses them.
+znodes are the way! */
+
+#define PATH_READA	0x1 /* do read ahead */
+#define PATH_READA_BACK 0x2 /* read backwards */
+
+struct  path {
+  int                   path_length;                      	/* Length of the array above.   */
+  int			reada;
+  struct  path_element  path_elements[EXTENDED_MAX_HEIGHT];	/* Array of the path elements.  */
+  int			pos_in_item;
+};
+
+#define pos_in_item(path) ((path)->pos_in_item)
+
+#define INITIALIZE_PATH(var) \
+struct path var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,}
+
+/* Get path element by path and path position. */
+#define PATH_OFFSET_PELEMENT(p_s_path,n_offset)  ((p_s_path)->path_elements +(n_offset))
+
+/* Get buffer header at the path by path and path position. */
+#define PATH_OFFSET_PBUFFER(p_s_path,n_offset)   (PATH_OFFSET_PELEMENT(p_s_path,n_offset)->pe_buffer)
+
+/* Get position in the element at the path by path and path position. */
+#define PATH_OFFSET_POSITION(p_s_path,n_offset) (PATH_OFFSET_PELEMENT(p_s_path,n_offset)->pe_position)
+
+
+#define PATH_PLAST_BUFFER(p_s_path) (PATH_OFFSET_PBUFFER((p_s_path), (p_s_path)->path_length))
+				/* you know, to the person who didn't
+                                   write this the macro name does not
+                                   at first suggest what it does.
+                                   Maybe POSITION_FROM_PATH_END? Or
+                                   maybe we should just focus on
+                                   dumping paths... -Hans */
+#define PATH_LAST_POSITION(p_s_path) (PATH_OFFSET_POSITION((p_s_path), (p_s_path)->path_length))
+
+
+#define PATH_PITEM_HEAD(p_s_path)    B_N_PITEM_HEAD(PATH_PLAST_BUFFER(p_s_path),PATH_LAST_POSITION(p_s_path))
+
+/* in do_balance leaf has h == 0 in contrast with path structure,
+   where root has level == 0. That is why we need these defines */
+#define PATH_H_PBUFFER(p_s_path, h) PATH_OFFSET_PBUFFER (p_s_path, p_s_path->path_length - (h))	/* tb->S[h] */
+#define PATH_H_PPARENT(path, h) PATH_H_PBUFFER (path, (h) + 1)			/* tb->F[h] or tb->S[0]->b_parent */
+#define PATH_H_POSITION(path, h) PATH_OFFSET_POSITION (path, path->path_length - (h))	
+#define PATH_H_B_ITEM_ORDER(path, h) PATH_H_POSITION(path, h + 1)		/* tb->S[h]->b_item_order */
+
+#define PATH_H_PATH_OFFSET(p_s_path, n_h) ((p_s_path)->path_length - (n_h))
+
+#define get_last_bh(path) PATH_PLAST_BUFFER(path)
+#define get_ih(path) PATH_PITEM_HEAD(path)
+#define get_item_pos(path) PATH_LAST_POSITION(path)
+#define get_item(path) ((void *)B_N_PITEM(PATH_PLAST_BUFFER(path), PATH_LAST_POSITION (path)))
+#define item_moved(ih,path) comp_items(ih, path)
+#define path_changed(ih,path) comp_items (ih, path)
+
+
+/***************************************************************************/
+/*                       MISC                                              */
+/***************************************************************************/
+
+/* Size of pointer to the unformatted node. */
+#define UNFM_P_SIZE (sizeof(unp_t))
+#define UNFM_P_SHIFT 2
+
+// in in-core inode key is stored on le form
+#define INODE_PKEY(inode) ((struct reiserfs_key *)(REISERFS_I(inode)->i_key))
+
+#define MAX_UL_INT 0xffffffff
+#define MAX_INT    0x7ffffff
+#define MAX_US_INT 0xffff
+
+// reiserfs version 2 has max offset 60 bits. Version 1 - 32 bit offset
+#define U32_MAX (~(__u32)0)
+
+static inline loff_t max_reiserfs_offset (struct inode * inode)
+{
+    if (get_inode_item_key_version(inode) == KEY_FORMAT_3_5)
+	return (loff_t)U32_MAX;
+
+    return (loff_t)((~(__u64)0) >> 4);
+}
+
+
+/*#define MAX_KEY_UNIQUENESS	MAX_UL_INT*/
+#define MAX_KEY_OBJECTID	MAX_UL_INT
+
+
+#define MAX_B_NUM  MAX_UL_INT
+#define MAX_FC_NUM MAX_US_INT
+
+
+/* the purpose is to detect overflow of an unsigned short */
+#define REISERFS_LINK_MAX (MAX_US_INT - 1000)
+
+
+/* The following defines are used in reiserfs_insert_item and reiserfs_append_item  */
+#define REISERFS_KERNEL_MEM		0	/* reiserfs kernel memory mode	*/
+#define REISERFS_USER_MEM		1	/* reiserfs user memory mode		*/
+
+#define fs_generation(s) (REISERFS_SB(s)->s_generation_counter)
+#define get_generation(s) atomic_read (&fs_generation(s))
+#define FILESYSTEM_CHANGED_TB(tb)  (get_generation((tb)->tb_sb) != (tb)->fs_gen)
+#define __fs_changed(gen,s) (gen != get_generation (s))
+#define fs_changed(gen,s) ({cond_resched(); __fs_changed(gen, s);})
+
+
+/***************************************************************************/
+/*                  FIXATE NODES                                           */
+/***************************************************************************/
+
+#define VI_TYPE_LEFT_MERGEABLE 1
+#define VI_TYPE_RIGHT_MERGEABLE 2
+
+/* To make any changes in the tree we always first find node, that
+   contains item to be changed/deleted or place to insert a new
+   item. We call this node S. To do balancing we need to decide what
+   we will shift to left/right neighbor, or to a new node, where new
+   item will be etc. To make this analysis simpler we build virtual
+   node. Virtual node is an array of items, that will replace items of
+   node S. (For instance if we are going to delete an item, virtual
+   node does not contain it). Virtual node keeps information about
+   item sizes and types, mergeability of first and last items, sizes
+   of all entries in directory item. We use this array of items when
+   calculating what we can shift to neighbors and how many nodes we
+   have to have if we do not any shiftings, if we shift to left/right
+   neighbor or to both. */
+struct virtual_item
+{
+    int vi_index; // index in the array of item operations
+    unsigned short vi_type;	// left/right mergeability
+    unsigned short vi_item_len;           /* length of item that it will have after balancing */
+    struct item_head * vi_ih;
+    const char * vi_item;     // body of item (old or new)
+    const void * vi_new_data; // 0 always but paste mode
+    void * vi_uarea;    // item specific area
+};
+
+
+struct virtual_node
+{
+  char * vn_free_ptr;		/* this is a pointer to the free space in the buffer */
+  unsigned short vn_nr_item;	/* number of items in virtual node */
+  short vn_size;        	/* size of node , that node would have if it has unlimited size and no balancing is performed */
+  short vn_mode;		/* mode of balancing (paste, insert, delete, cut) */
+  short vn_affected_item_num; 
+  short vn_pos_in_item;
+  struct item_head * vn_ins_ih;	/* item header of inserted item, 0 for other modes */
+  const void * vn_data;
+  struct virtual_item * vn_vi;	/* array of items (including a new one, excluding item to be deleted) */
+};
+
+/* used by directory items when creating virtual nodes */
+struct direntry_uarea {
+    int flags;
+    __u16 entry_count;
+    __u16 entry_sizes[1];
+} __attribute__ ((__packed__)) ;
+
+
+/***************************************************************************/
+/*                  TREE BALANCE                                           */
+/***************************************************************************/
+
+/* This temporary structure is used in tree balance algorithms, and
+   constructed as we go to the extent that its various parts are
+   needed.  It contains arrays of nodes that can potentially be
+   involved in the balancing of node S, and parameters that define how
+   each of the nodes must be balanced.  Note that in these algorithms
+   for balancing the worst case is to need to balance the current node
+   S and the left and right neighbors and all of their parents plus
+   create a new node.  We implement S1 balancing for the leaf nodes
+   and S0 balancing for the internal nodes (S1 and S0 are defined in
+   our papers.)*/
+
+#define MAX_FREE_BLOCK 7	/* size of the array of buffers to free at end of do_balance */
+
+/* maximum number of FEB blocknrs on a single level */
+#define MAX_AMOUNT_NEEDED 2
+
+/* someday somebody will prefix every field in this struct with tb_ */
+struct tree_balance
+{
+  int tb_mode;
+  int need_balance_dirty;
+  struct super_block * tb_sb;
+  struct reiserfs_transaction_handle *transaction_handle ;
+  struct path * tb_path;
+  struct buffer_head * L[MAX_HEIGHT];        /* array of left neighbors of nodes in the path */
+  struct buffer_head * R[MAX_HEIGHT];        /* array of right neighbors of nodes in the path*/
+  struct buffer_head * FL[MAX_HEIGHT];       /* array of fathers of the left  neighbors      */
+  struct buffer_head * FR[MAX_HEIGHT];       /* array of fathers of the right neighbors      */
+  struct buffer_head * CFL[MAX_HEIGHT];      /* array of common parents of center node and its left neighbor  */
+  struct buffer_head * CFR[MAX_HEIGHT];      /* array of common parents of center node and its right neighbor */
+
+  struct buffer_head * FEB[MAX_FEB_SIZE]; /* array of empty buffers. Number of buffers in array equals
+					     cur_blknum. */
+  struct buffer_head * used[MAX_FEB_SIZE];
+  struct buffer_head * thrown[MAX_FEB_SIZE];
+  int lnum[MAX_HEIGHT];	/* array of number of items which must be
+			   shifted to the left in order to balance the
+			   current node; for leaves includes item that
+			   will be partially shifted; for internal
+			   nodes, it is the number of child pointers
+			   rather than items. It includes the new item
+			   being created. The code sometimes subtracts
+			   one to get the number of wholly shifted
+			   items for other purposes. */
+  int rnum[MAX_HEIGHT];	/* substitute right for left in comment above */
+  int lkey[MAX_HEIGHT];               /* array indexed by height h mapping the key delimiting L[h] and
+					       S[h] to its item number within the node CFL[h] */
+  int rkey[MAX_HEIGHT];               /* substitute r for l in comment above */
+  int insert_size[MAX_HEIGHT];        /* the number of bytes by we are trying to add or remove from
+					       S[h]. A negative value means removing.  */
+  int blknum[MAX_HEIGHT];             /* number of nodes that will replace node S[h] after
+					       balancing on the level h of the tree.  If 0 then S is
+					       being deleted, if 1 then S is remaining and no new nodes
+					       are being created, if 2 or 3 then 1 or 2 new nodes is
+					       being created */
+
+  /* fields that are used only for balancing leaves of the tree */
+  int cur_blknum;	/* number of empty blocks having been already allocated			*/
+  int s0num;             /* number of items that fall into left most  node when S[0] splits	*/
+  int s1num;             /* number of items that fall into first  new node when S[0] splits	*/
+  int s2num;             /* number of items that fall into second new node when S[0] splits	*/
+  int lbytes;            /* number of bytes which can flow to the left neighbor from the	left	*/
+  /* most liquid item that cannot be shifted from S[0] entirely		*/
+  /* if -1 then nothing will be partially shifted */
+  int rbytes;            /* number of bytes which will flow to the right neighbor from the right	*/
+  /* most liquid item that cannot be shifted from S[0] entirely		*/
+  /* if -1 then nothing will be partially shifted                           */
+  int s1bytes;		/* number of bytes which flow to the first  new node when S[0] splits	*/
+            			/* note: if S[0] splits into 3 nodes, then items do not need to be cut	*/
+  int s2bytes;
+  struct buffer_head * buf_to_free[MAX_FREE_BLOCK]; /* buffers which are to be freed after do_balance finishes by unfix_nodes */
+  char * vn_buf;		/* kmalloced memory. Used to create
+				   virtual node and keep map of
+				   dirtied bitmap blocks */
+  int vn_buf_size;		/* size of the vn_buf */
+  struct virtual_node * tb_vn;	/* VN starts after bitmap of bitmap blocks */
+
+  int fs_gen;                  /* saved value of `reiserfs_generation' counter
+			          see FILESYSTEM_CHANGED() macro in reiserfs_fs.h */
+#ifdef DISPLACE_NEW_PACKING_LOCALITIES
+  struct reiserfs_key  key;	      /* key pointer, to pass to block allocator or
+				 another low-level subsystem */
+#endif
+} ;
+
+/* These are modes of balancing */
+
+/* When inserting an item. */
+#define M_INSERT	'i'
+/* When inserting into (directories only) or appending onto an already
+   existant item. */
+#define M_PASTE		'p'
+/* When deleting an item. */
+#define M_DELETE	'd'
+/* When truncating an item or removing an entry from a (directory) item. */
+#define M_CUT 		'c'
+
+/* used when balancing on leaf level skipped (in reiserfsck) */
+#define M_INTERNAL	'n'
+
+/* When further balancing is not needed, then do_balance does not need
+   to be called. */
+#define M_SKIP_BALANCING 		's'
+#define M_CONVERT	'v'
+
+/* modes of leaf_move_items */
+#define LEAF_FROM_S_TO_L 0
+#define LEAF_FROM_S_TO_R 1
+#define LEAF_FROM_R_TO_L 2
+#define LEAF_FROM_L_TO_R 3
+#define LEAF_FROM_S_TO_SNEW 4
+
+#define FIRST_TO_LAST 0
+#define LAST_TO_FIRST 1
+
+/* used in do_balance for passing parent of node information that has
+   been gotten from tb struct */
+struct buffer_info {
+    struct tree_balance * tb;
+    struct buffer_head * bi_bh;
+    struct buffer_head * bi_parent;
+    int bi_position;
+};
+
+
+/* there are 4 types of items: stat data, directory item, indirect, direct.
++-------------------+------------+--------------+------------+
+|	            |  k_offset  | k_uniqueness | mergeable? |
++-------------------+------------+--------------+------------+
+|     stat data     |	0        |      0       |   no       |
++-------------------+------------+--------------+------------+
+| 1st directory item| DOT_OFFSET |DIRENTRY_UNIQUENESS|   no       | 
+| non 1st directory | hash value |              |   yes      |
+|     item          |            |              |            |
++-------------------+------------+--------------+------------+
+| indirect item     | offset + 1 |TYPE_INDIRECT |   if this is not the first indirect item of the object
++-------------------+------------+--------------+------------+
+| direct item       | offset + 1 |TYPE_DIRECT   | if not this is not the first direct item of the object
++-------------------+------------+--------------+------------+
+*/
+
+struct item_operations {
+    int (*bytes_number) (struct item_head * ih, int block_size);
+    void (*decrement_key) (struct cpu_key *);
+    int (*is_left_mergeable) (struct reiserfs_key * ih, unsigned long bsize);
+    void (*print_item) (struct item_head *, char * item);
+    void (*check_item) (struct item_head *, char * item);
+
+    int (*create_vi) (struct virtual_node * vn, struct virtual_item * vi, 
+		      int is_affected, int insert_size);
+    int (*check_left) (struct virtual_item * vi, int free, 
+			    int start_skip, int end_skip);
+    int (*check_right) (struct virtual_item * vi, int free);
+    int (*part_size) (struct virtual_item * vi, int from, int to);
+    int (*unit_num) (struct virtual_item * vi);
+    void (*print_vi) (struct virtual_item * vi);
+};
+
+
+extern struct item_operations * item_ops [TYPE_ANY + 1];
+
+#define op_bytes_number(ih,bsize)                    item_ops[le_ih_k_type (ih)]->bytes_number (ih, bsize)
+#define op_is_left_mergeable(key,bsize)              item_ops[le_key_k_type (le_key_version (key), key)]->is_left_mergeable (key, bsize)
+#define op_print_item(ih,item)                       item_ops[le_ih_k_type (ih)]->print_item (ih, item)
+#define op_check_item(ih,item)                       item_ops[le_ih_k_type (ih)]->check_item (ih, item)
+#define op_create_vi(vn,vi,is_affected,insert_size)  item_ops[le_ih_k_type ((vi)->vi_ih)]->create_vi (vn,vi,is_affected,insert_size)
+#define op_check_left(vi,free,start_skip,end_skip) item_ops[(vi)->vi_index]->check_left (vi, free, start_skip, end_skip)
+#define op_check_right(vi,free)                      item_ops[(vi)->vi_index]->check_right (vi, free)
+#define op_part_size(vi,from,to)                     item_ops[(vi)->vi_index]->part_size (vi, from, to)
+#define op_unit_num(vi)				     item_ops[(vi)->vi_index]->unit_num (vi)
+#define op_print_vi(vi)                              item_ops[(vi)->vi_index]->print_vi (vi)
+
+
+
+#define COMP_SHORT_KEYS comp_short_keys
+
+/* number of blocks pointed to by the indirect item */
+#define I_UNFM_NUM(p_s_ih)	( ih_item_len(p_s_ih) / UNFM_P_SIZE )
+
+/* the used space within the unformatted node corresponding to pos within the item pointed to by ih */
+#define I_POS_UNFM_SIZE(ih,pos,size) (((pos) == I_UNFM_NUM(ih) - 1 ) ? (size) - ih_free_space(ih) : (size))
+
+/* number of bytes contained by the direct item or the unformatted nodes the indirect item points to */
+
+
+/* get the item header */ 
+#define B_N_PITEM_HEAD(bh,item_num) ( (struct item_head * )((bh)->b_data + BLKH_SIZE) + (item_num) )
+
+/* get key */
+#define B_N_PDELIM_KEY(bh,item_num) ( (struct reiserfs_key * )((bh)->b_data + BLKH_SIZE) + (item_num) )
+
+/* get the key */
+#define B_N_PKEY(bh,item_num) ( &(B_N_PITEM_HEAD(bh,item_num)->ih_key) )
+
+/* get item body */
+#define B_N_PITEM(bh,item_num) ( (bh)->b_data + ih_location(B_N_PITEM_HEAD((bh),(item_num))))
+
+/* get the stat data by the buffer header and the item order */
+#define B_N_STAT_DATA(bh,nr) \
+( (struct stat_data *)((bh)->b_data + ih_location(B_N_PITEM_HEAD((bh),(nr))) ) )
+
+    /* following defines use reiserfs buffer header and item header */
+
+/* get stat-data */
+#define B_I_STAT_DATA(bh, ih) ( (struct stat_data * )((bh)->b_data + ih_location(ih)) )
+
+// this is 3976 for size==4096
+#define MAX_DIRECT_ITEM_LEN(size) ((size) - BLKH_SIZE - 2*IH_SIZE - SD_SIZE - UNFM_P_SIZE)
+
+/* indirect items consist of entries which contain blocknrs, pos
+   indicates which entry, and B_I_POS_UNFM_POINTER resolves to the
+   blocknr contained by the entry pos points to */
+#define B_I_POS_UNFM_POINTER(bh,ih,pos) le32_to_cpu(*(((unp_t *)B_I_PITEM(bh,ih)) + (pos)))
+#define PUT_B_I_POS_UNFM_POINTER(bh,ih,pos, val) do {*(((unp_t *)B_I_PITEM(bh,ih)) + (pos)) = cpu_to_le32(val); } while (0)
+
+struct reiserfs_iget_args {
+    __u32 objectid ;
+    __u32 dirid ;
+} ;
+
+/***************************************************************************/
+/*                    FUNCTION DECLARATIONS                                */
+/***************************************************************************/
+
+/*#ifdef __KERNEL__*/
+#define get_journal_desc_magic(bh) (bh->b_data + bh->b_size - 12)
+
+#define journal_trans_half(blocksize) \
+	((blocksize - sizeof (struct reiserfs_journal_desc) + sizeof (__u32) - 12) / sizeof (__u32))
+
+/* journal.c see journal.c for all the comments here */
+
+/* first block written in a commit.  */
+struct reiserfs_journal_desc {
+  __u32 j_trans_id ;			/* id of commit */
+  __u32 j_len ;			/* length of commit. len +1 is the commit block */
+  __u32 j_mount_id ;				/* mount id of this trans*/
+  __u32 j_realblock[1] ; /* real locations for each block */
+} ;
+
+#define get_desc_trans_id(d)   le32_to_cpu((d)->j_trans_id)
+#define get_desc_trans_len(d)  le32_to_cpu((d)->j_len)
+#define get_desc_mount_id(d)   le32_to_cpu((d)->j_mount_id)
+
+#define set_desc_trans_id(d,val)       do { (d)->j_trans_id = cpu_to_le32 (val); } while (0)
+#define set_desc_trans_len(d,val)      do { (d)->j_len = cpu_to_le32 (val); } while (0)
+#define set_desc_mount_id(d,val)       do { (d)->j_mount_id = cpu_to_le32 (val); } while (0)
+
+/* last block written in a commit */
+struct reiserfs_journal_commit {
+  __u32 j_trans_id ;			/* must match j_trans_id from the desc block */
+  __u32 j_len ;			/* ditto */
+  __u32 j_realblock[1] ; /* real locations for each block */
+} ;
+
+#define get_commit_trans_id(c) le32_to_cpu((c)->j_trans_id)
+#define get_commit_trans_len(c)        le32_to_cpu((c)->j_len)
+#define get_commit_mount_id(c) le32_to_cpu((c)->j_mount_id)
+
+#define set_commit_trans_id(c,val)     do { (c)->j_trans_id = cpu_to_le32 (val); } while (0)
+#define set_commit_trans_len(c,val)    do { (c)->j_len = cpu_to_le32 (val); } while (0)
+
+/* this header block gets written whenever a transaction is considered fully flushed, and is more recent than the
+** last fully flushed transaction.  fully flushed means all the log blocks and all the real blocks are on disk,
+** and this transaction does not need to be replayed.
+*/
+struct reiserfs_journal_header {
+  __u32 j_last_flush_trans_id ;		/* id of last fully flushed transaction */
+  __u32 j_first_unflushed_offset ;      /* offset in the log of where to start replay after a crash */
+  __u32 j_mount_id ;
+  /* 12 */ struct journal_params jh_journal;
+} ;
+
+/* biggest tunable defines are right here */
+#define JOURNAL_BLOCK_COUNT 8192 /* number of blocks in the journal */
+#define JOURNAL_TRANS_MAX_DEFAULT 1024   /* biggest possible single transaction, don't change for now (8/3/99) */
+#define JOURNAL_TRANS_MIN_DEFAULT 256
+#define JOURNAL_MAX_BATCH_DEFAULT   900 /* max blocks to batch into one transaction, don't make this any bigger than 900 */
+#define JOURNAL_MIN_RATIO 2
+#define JOURNAL_MAX_COMMIT_AGE 30 
+#define JOURNAL_MAX_TRANS_AGE 30
+#define JOURNAL_PER_BALANCE_CNT (3 * (MAX_HEIGHT-2) + 9)
+#ifdef CONFIG_QUOTA
+#define REISERFS_QUOTA_TRANS_BLOCKS 2	/* We need to update data and inode (atime) */
+#define REISERFS_QUOTA_INIT_BLOCKS (DQUOT_MAX_WRITES*(JOURNAL_PER_BALANCE_CNT+2)+1)	/* 1 balancing, 1 bitmap, 1 data per write + stat data update */
+#else
+#define REISERFS_QUOTA_TRANS_BLOCKS 0
+#define REISERFS_QUOTA_INIT_BLOCKS 0
+#endif
+
+/* both of these can be as low as 1, or as high as you want.  The min is the
+** number of 4k bitmap nodes preallocated on mount. New nodes are allocated
+** as needed, and released when transactions are committed.  On release, if 
+** the current number of nodes is > max, the node is freed, otherwise, 
+** it is put on a free list for faster use later.
+*/
+#define REISERFS_MIN_BITMAP_NODES 10 
+#define REISERFS_MAX_BITMAP_NODES 100 
+
+#define JBH_HASH_SHIFT 13 /* these are based on journal hash size of 8192 */
+#define JBH_HASH_MASK 8191
+
+#define _jhashfn(sb,block)	\
+	(((unsigned long)sb>>L1_CACHE_SHIFT) ^ \
+	 (((block)<<(JBH_HASH_SHIFT - 6)) ^ ((block) >> 13) ^ ((block) << (JBH_HASH_SHIFT - 12))))
+#define journal_hash(t,sb,block) ((t)[_jhashfn((sb),(block)) & JBH_HASH_MASK])
+
+// We need these to make journal.c code more readable
+#define journal_find_get_block(s, block) __find_get_block(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize)
+#define journal_getblk(s, block) __getblk(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize)
+#define journal_bread(s, block) __bread(SB_JOURNAL(s)->j_dev_bd, block, s->s_blocksize)
+
+enum reiserfs_bh_state_bits {
+    BH_JDirty = BH_PrivateStart, /* buffer is in current transaction */
+    BH_JDirty_wait,
+    BH_JNew,                     /* disk block was taken off free list before
+                                  * being in a finished transaction, or
+                                  * written to disk. Can be reused immed. */
+    BH_JPrepared,
+    BH_JRestore_dirty,
+    BH_JTest, // debugging only will go away
+};
+
+BUFFER_FNS(JDirty, journaled);
+TAS_BUFFER_FNS(JDirty, journaled);
+BUFFER_FNS(JDirty_wait, journal_dirty);
+TAS_BUFFER_FNS(JDirty_wait, journal_dirty);
+BUFFER_FNS(JNew, journal_new);
+TAS_BUFFER_FNS(JNew, journal_new);
+BUFFER_FNS(JPrepared, journal_prepared);
+TAS_BUFFER_FNS(JPrepared, journal_prepared);
+BUFFER_FNS(JRestore_dirty, journal_restore_dirty);
+TAS_BUFFER_FNS(JRestore_dirty, journal_restore_dirty);
+BUFFER_FNS(JTest, journal_test);
+TAS_BUFFER_FNS(JTest, journal_test);
+
+/*
+** transaction handle which is passed around for all journal calls
+*/
+struct reiserfs_transaction_handle {
+  struct super_block *t_super ; /* super for this FS when journal_begin was
+				   called. saves calls to reiserfs_get_super
+				   also used by nested transactions to make
+				   sure they are nesting on the right FS
+				   _must_ be first in the handle
+				*/
+  int t_refcount;
+  int t_blocks_logged ;         /* number of blocks this writer has logged */
+  int t_blocks_allocated ;      /* number of blocks this writer allocated */
+  unsigned long t_trans_id ;    /* sanity check, equals the current trans id */
+  void *t_handle_save ;		/* save existing current->journal_info */
+  unsigned displace_new_blocks:1; /* if new block allocation occurres, that block
+				   should be displaced from others */
+  struct list_head t_list;
+} ;
+
+/* used to keep track of ordered and tail writes, attached to the buffer
+ * head through b_journal_head.
+ */
+struct reiserfs_jh {
+    struct reiserfs_journal_list *jl;
+    struct buffer_head *bh;
+    struct list_head list;
+};
+
+void reiserfs_free_jh(struct buffer_head *bh);
+int reiserfs_add_tail_list(struct inode *inode, struct buffer_head *bh);
+int reiserfs_add_ordered_list(struct inode *inode, struct buffer_head *bh);
+int journal_mark_dirty(struct reiserfs_transaction_handle *, struct super_block *, struct buffer_head *bh) ;
+
+static inline int
+reiserfs_file_data_log(struct inode *inode) {
+    if (reiserfs_data_log(inode->i_sb) ||
+       (REISERFS_I(inode)->i_flags & i_data_log))
+        return 1 ;
+    return 0 ;
+}
+
+static inline int reiserfs_transaction_running(struct super_block *s) {
+    struct reiserfs_transaction_handle *th = current->journal_info ;
+    if (th && th->t_super == s)
+        return 1 ;
+    if (th && th->t_super == NULL)
+        BUG();
+    return 0 ;
+}
+
+int reiserfs_async_progress_wait(struct super_block *s);
+
+struct reiserfs_transaction_handle *
+reiserfs_persistent_transaction(struct super_block *, int count);
+int reiserfs_end_persistent_transaction(struct reiserfs_transaction_handle *);
+int reiserfs_commit_page(struct inode *inode, struct page *page,
+		unsigned from, unsigned to);
+int reiserfs_flush_old_commits(struct super_block *);
+int reiserfs_commit_for_inode(struct inode *) ;
+int  reiserfs_inode_needs_commit(struct inode *) ;
+void reiserfs_update_inode_transaction(struct inode *) ;
+void reiserfs_wait_on_write_block(struct super_block *s) ;
+void reiserfs_block_writes(struct reiserfs_transaction_handle *th) ;
+void reiserfs_allow_writes(struct super_block *s) ;
+void reiserfs_check_lock_depth(struct super_block *s, char *caller) ;
+int reiserfs_prepare_for_journal(struct super_block *, struct buffer_head *bh, int wait) ;
+void reiserfs_restore_prepared_buffer(struct super_block *, struct buffer_head *bh) ;
+int journal_init(struct super_block *, const char * j_dev_name, int old_format, unsigned int) ;
+int journal_release(struct reiserfs_transaction_handle*, struct super_block *) ;
+int journal_release_error(struct reiserfs_transaction_handle*, struct super_block *) ;
+int journal_end(struct reiserfs_transaction_handle *, struct super_block *, unsigned long) ;
+int journal_end_sync(struct reiserfs_transaction_handle *, struct super_block *, unsigned long) ;
+int journal_mark_freed(struct reiserfs_transaction_handle *, struct super_block *, b_blocknr_t blocknr) ;
+int journal_transaction_should_end(struct reiserfs_transaction_handle *, int) ;
+int reiserfs_in_journal(struct super_block *p_s_sb, int bmap_nr, int bit_nr, int searchall, b_blocknr_t *next) ;
+int journal_begin(struct reiserfs_transaction_handle *, struct super_block *p_s_sb, unsigned long) ;
+int journal_join_abort(struct reiserfs_transaction_handle *, struct super_block *p_s_sb, unsigned long) ;
+void reiserfs_journal_abort (struct super_block *sb, int errno);
+void reiserfs_abort (struct super_block *sb, int errno, const char *fmt, ...);
+int reiserfs_allocate_list_bitmaps(struct super_block *s, struct reiserfs_list_bitmap *, int) ;
+
+void add_save_link (struct reiserfs_transaction_handle * th,
+					struct inode * inode, int truncate);
+int remove_save_link (struct inode * inode, int truncate);
+
+/* objectid.c */
+__u32 reiserfs_get_unused_objectid (struct reiserfs_transaction_handle *th);
+void reiserfs_release_objectid (struct reiserfs_transaction_handle *th, __u32 objectid_to_release);
+int reiserfs_convert_objectid_map_v1(struct super_block *) ;
+
+/* stree.c */
+int B_IS_IN_TREE(const struct buffer_head *);
+extern void copy_item_head(struct item_head * p_v_to,
+								  const struct item_head * p_v_from);
+
+// first key is in cpu form, second - le
+extern int  comp_short_keys (const struct reiserfs_key * le_key,
+				    const struct cpu_key * cpu_key);
+extern void le_key2cpu_key (struct cpu_key * to, const struct reiserfs_key * from);
+
+// both are in le form
+extern int comp_le_keys (const struct reiserfs_key *, const struct reiserfs_key *);
+extern int comp_short_le_keys (const struct reiserfs_key *, const struct reiserfs_key *);
+
+//
+// get key version from on disk key - kludge
+//
+static inline int le_key_version (const struct reiserfs_key * key)
+{
+    int type;
+    
+    type = offset_v2_k_type( &(key->u.k_offset_v2));
+    if (type != TYPE_DIRECT && type != TYPE_INDIRECT && type != TYPE_DIRENTRY)
+	return KEY_FORMAT_3_5;
+
+    return KEY_FORMAT_3_6;
+	
+}
+
+
+static inline void copy_key (struct reiserfs_key *to, const struct reiserfs_key *from)
+{
+    memcpy (to, from, KEY_SIZE);
+}
+
+
+int comp_items (const struct item_head * stored_ih, const struct path * p_s_path);
+const struct reiserfs_key * get_rkey (const struct path * p_s_chk_path,
+							 const struct super_block  * p_s_sb);
+int search_by_key (struct super_block *, const struct cpu_key *, 
+				   struct path *, int);
+#define search_item(s,key,path) search_by_key (s, key, path, DISK_LEAF_NODE_LEVEL)
+int search_for_position_by_key (struct super_block * p_s_sb, 
+								const struct cpu_key * p_s_cpu_key, 
+								struct path * p_s_search_path);
+extern void decrement_bcount (struct buffer_head * p_s_bh);
+void decrement_counters_in_path (struct path * p_s_search_path);
+void pathrelse (struct path * p_s_search_path);
+int reiserfs_check_path(struct path *p) ;
+void pathrelse_and_restore (struct super_block *s, struct path * p_s_search_path);
+
+int reiserfs_insert_item (struct reiserfs_transaction_handle *th, 
+			  struct path * path, 
+			  const struct cpu_key * key,
+			  struct item_head * ih,
+			  struct inode *inode, const char * body);
+
+int reiserfs_paste_into_item (struct reiserfs_transaction_handle *th,
+			      struct path * path,
+			      const struct cpu_key * key,
+			      struct inode *inode,
+			      const char * body, int paste_size);
+
+int reiserfs_cut_from_item (struct reiserfs_transaction_handle *th,
+			    struct path * path,
+			    struct cpu_key * key,
+			    struct inode * inode,
+			    struct page *page,
+			    loff_t new_file_size);
+
+int reiserfs_delete_item (struct reiserfs_transaction_handle *th,
+			  struct path * path, 
+			  const struct cpu_key * key,
+			  struct inode * inode, 
+			  struct buffer_head  * p_s_un_bh);
+
+void reiserfs_delete_solid_item (struct reiserfs_transaction_handle *th,
+			struct inode *inode, struct reiserfs_key * key);
+int reiserfs_delete_object (struct reiserfs_transaction_handle *th, struct inode * p_s_inode);
+int reiserfs_do_truncate (struct reiserfs_transaction_handle *th,
+			   struct  inode * p_s_inode, struct page *, 
+			   int update_timestamps);
+
+#define i_block_size(inode) ((inode)->i_sb->s_blocksize)
+#define file_size(inode) ((inode)->i_size)
+#define tail_size(inode) (file_size (inode) & (i_block_size (inode) - 1))
+
+#define tail_has_to_be_packed(inode) (have_large_tails ((inode)->i_sb)?\
+!STORE_TAIL_IN_UNFM_S1(file_size (inode), tail_size(inode), inode->i_sb->s_blocksize):have_small_tails ((inode)->i_sb)?!STORE_TAIL_IN_UNFM_S2(file_size (inode), tail_size(inode), inode->i_sb->s_blocksize):0 )
+
+void padd_item (char * item, int total_length, int length);
+
+/* inode.c */
+/* args for the create parameter of reiserfs_get_block */
+#define GET_BLOCK_NO_CREATE 0 /* don't create new blocks or convert tails */
+#define GET_BLOCK_CREATE 1    /* add anything you need to find block */
+#define GET_BLOCK_NO_HOLE 2   /* return -ENOENT for file holes */
+#define GET_BLOCK_READ_DIRECT 4  /* read the tail if indirect item not found */
+#define GET_BLOCK_NO_ISEM     8 /* i_sem is not held, don't preallocate */
+#define GET_BLOCK_NO_DANGLE   16 /* don't leave any transactions running */
+
+int restart_transaction(struct reiserfs_transaction_handle *th, struct inode *inode, struct path *path);
+void reiserfs_read_locked_inode(struct inode * inode, struct reiserfs_iget_args *args) ;
+int reiserfs_find_actor(struct inode * inode, void *p) ;
+int reiserfs_init_locked_inode(struct inode * inode, void *p) ;
+void reiserfs_delete_inode (struct inode * inode);
+int reiserfs_write_inode (struct inode * inode, int) ;
+int reiserfs_get_block (struct inode * inode, sector_t block, struct buffer_head * bh_result, int create);
+struct dentry *reiserfs_get_dentry(struct super_block *, void *) ;
+struct dentry *reiserfs_decode_fh(struct super_block *sb, __u32 *data,
+                                     int len, int fhtype,
+				  int (*acceptable)(void *contect, struct dentry *de),
+				  void *context) ;
+int reiserfs_encode_fh( struct dentry *dentry, __u32 *data, int *lenp, 
+						int connectable );
+
+int reiserfs_truncate_file(struct inode *, int update_timestamps) ;
+void make_cpu_key (struct cpu_key * cpu_key, struct inode * inode, loff_t offset,
+		   int type, int key_length);
+void make_le_item_head (struct item_head * ih, const struct cpu_key * key, 
+			int version,
+			loff_t offset, int type, int length, int entry_count);
+struct inode * reiserfs_iget (struct super_block * s, 
+			      const struct cpu_key * key);
+
+
+int reiserfs_new_inode (struct reiserfs_transaction_handle *th, 
+				   struct inode * dir, int mode, 
+				   const char * symname, loff_t i_size,
+				   struct dentry *dentry, struct inode *inode);
+
+void reiserfs_update_sd_size (struct reiserfs_transaction_handle *th,
+                              struct inode * inode, loff_t size);
+
+static inline void reiserfs_update_sd(struct reiserfs_transaction_handle *th,
+                                      struct inode *inode)
+{
+    reiserfs_update_sd_size(th, inode, inode->i_size) ;
+}
+
+void sd_attrs_to_i_attrs( __u16 sd_attrs, struct inode *inode );
+void i_attrs_to_sd_attrs( struct inode *inode, __u16 *sd_attrs );
+int reiserfs_setattr(struct dentry *dentry, struct iattr *attr);
+
+/* namei.c */
+void set_de_name_and_namelen (struct reiserfs_dir_entry * de);
+int search_by_entry_key (struct super_block * sb, const struct cpu_key * key, 
+			 struct path * path, 
+			 struct reiserfs_dir_entry * de);
+struct dentry *reiserfs_get_parent(struct dentry *) ;
+/* procfs.c */
+
+#if defined( CONFIG_PROC_FS ) && defined( CONFIG_REISERFS_PROC_INFO )
+#define REISERFS_PROC_INFO
+#else
+#undef REISERFS_PROC_INFO
+#endif
+
+int reiserfs_proc_info_init( struct super_block *sb );
+int reiserfs_proc_info_done( struct super_block *sb );
+struct proc_dir_entry *reiserfs_proc_register_global( char *name, 
+													  read_proc_t *func );
+void reiserfs_proc_unregister_global( const char *name );
+int reiserfs_proc_info_global_init( void );
+int reiserfs_proc_info_global_done( void );
+int reiserfs_global_version_in_proc( char *buffer, char **start, off_t offset,
+									 int count, int *eof, void *data );
+
+#if defined( REISERFS_PROC_INFO )
+
+#define PROC_EXP( e )   e
+
+#define __PINFO( sb ) REISERFS_SB(sb) -> s_proc_info_data
+#define PROC_INFO_MAX( sb, field, value )								\
+    __PINFO( sb ).field =												\
+        max( REISERFS_SB( sb ) -> s_proc_info_data.field, value )
+#define PROC_INFO_INC( sb, field ) ( ++ ( __PINFO( sb ).field ) )
+#define PROC_INFO_ADD( sb, field, val ) ( __PINFO( sb ).field += ( val ) )
+#define PROC_INFO_BH_STAT( sb, bh, level )							\
+    PROC_INFO_INC( sb, sbk_read_at[ ( level ) ] );						\
+    PROC_INFO_ADD( sb, free_at[ ( level ) ], B_FREE_SPACE( bh ) );	\
+    PROC_INFO_ADD( sb, items_at[ ( level ) ], B_NR_ITEMS( bh ) )
+#else
+#define PROC_EXP( e )
+#define VOID_V ( ( void ) 0 )
+#define PROC_INFO_MAX( sb, field, value ) VOID_V
+#define PROC_INFO_INC( sb, field ) VOID_V
+#define PROC_INFO_ADD( sb, field, val ) VOID_V
+#define PROC_INFO_BH_STAT( p_s_sb, p_s_bh, n_node_level ) VOID_V
+#endif
+
+/* dir.c */
+extern struct inode_operations reiserfs_dir_inode_operations;
+extern struct inode_operations reiserfs_symlink_inode_operations;
+extern struct inode_operations reiserfs_special_inode_operations;
+extern struct file_operations reiserfs_dir_operations;
+
+/* tail_conversion.c */
+int direct2indirect (struct reiserfs_transaction_handle *, struct inode *, struct path *, struct buffer_head *, loff_t);
+int indirect2direct (struct reiserfs_transaction_handle *, struct inode *, struct page *, struct path *, const struct cpu_key *, loff_t, char *);
+void reiserfs_unmap_buffer(struct buffer_head *) ;
+
+
+/* file.c */
+extern struct inode_operations reiserfs_file_inode_operations;
+extern struct file_operations reiserfs_file_operations;
+extern struct address_space_operations reiserfs_address_space_operations ;
+
+/* fix_nodes.c */
+#ifdef CONFIG_REISERFS_CHECK
+void * reiserfs_kmalloc (size_t size, int flags, struct super_block * s);
+void reiserfs_kfree (const void * vp, size_t size, struct super_block * s);
+#else
+static inline void *reiserfs_kmalloc(size_t size, int flags,
+					struct super_block *s)
+{
+	return kmalloc(size, flags);
+}
+
+static inline void reiserfs_kfree(const void *vp, size_t size,
+					struct super_block *s)
+{
+	kfree(vp);
+}
+#endif
+
+int fix_nodes (int n_op_mode, struct tree_balance * p_s_tb, 
+	       struct item_head * p_s_ins_ih, const void *);
+void unfix_nodes (struct tree_balance *);
+
+
+/* prints.c */
+void reiserfs_panic (struct super_block * s, const char * fmt, ...) __attribute__ ( ( noreturn ) );
+void reiserfs_info (struct super_block *s, const char * fmt, ...);
+void reiserfs_debug (struct super_block *s, int level, const char * fmt, ...);
+void print_indirect_item (struct buffer_head * bh, int item_num);
+void store_print_tb (struct tree_balance * tb);
+void print_cur_tb (char * mes);
+void print_de (struct reiserfs_dir_entry * de);
+void print_bi (struct buffer_info * bi, char * mes);
+#define PRINT_LEAF_ITEMS 1   /* print all items */
+#define PRINT_DIRECTORY_ITEMS 2 /* print directory items */
+#define PRINT_DIRECT_ITEMS 4 /* print contents of direct items */
+void print_block (struct buffer_head * bh, ...);
+void print_bmap (struct super_block * s, int silent);
+void print_bmap_block (int i, char * data, int size, int silent);
+/*void print_super_block (struct super_block * s, char * mes);*/
+void print_objectid_map (struct super_block * s);
+void print_block_head (struct buffer_head * bh, char * mes);
+void check_leaf (struct buffer_head * bh);
+void check_internal (struct buffer_head * bh);
+void print_statistics (struct super_block * s);
+char * reiserfs_hashname(int code);
+
+/* lbalance.c */
+int leaf_move_items (int shift_mode, struct tree_balance * tb, int mov_num, int mov_bytes, struct buffer_head * Snew);
+int leaf_shift_left (struct tree_balance * tb, int shift_num, int shift_bytes);
+int leaf_shift_right (struct tree_balance * tb, int shift_num, int shift_bytes);
+void leaf_delete_items (struct buffer_info * cur_bi, int last_first, int first, int del_num, int del_bytes);
+void leaf_insert_into_buf (struct buffer_info * bi, int before, 
+                           struct item_head * inserted_item_ih, const char * inserted_item_body, int zeros_number);
+void leaf_paste_in_buffer (struct buffer_info * bi, int pasted_item_num, 
+                           int pos_in_item, int paste_size, const char * body, int zeros_number);
+void leaf_cut_from_buffer (struct buffer_info * bi, int cut_item_num, int pos_in_item, 
+                           int cut_size);
+void leaf_paste_entries (struct buffer_head * bh, int item_num, int before, 
+                         int new_entry_count, struct reiserfs_de_head * new_dehs, const char * records, int paste_size);
+/* ibalance.c */
+int balance_internal (struct tree_balance * , int, int, struct item_head * , 
+                      struct buffer_head **);
+
+/* do_balance.c */
+void do_balance_mark_leaf_dirty (struct tree_balance * tb,
+					struct buffer_head * bh, int flag);
+#define do_balance_mark_internal_dirty do_balance_mark_leaf_dirty
+#define do_balance_mark_sb_dirty do_balance_mark_leaf_dirty
+
+void do_balance (struct tree_balance * tb, struct item_head * ih, 
+                 const char * body, int flag);
+void reiserfs_invalidate_buffer (struct tree_balance * tb, struct buffer_head * bh);
+
+int get_left_neighbor_position (struct tree_balance * tb, int h);
+int get_right_neighbor_position (struct tree_balance * tb, int h);
+void replace_key (struct tree_balance * tb, struct buffer_head *, int, struct buffer_head *, int);
+void make_empty_node (struct buffer_info *);
+struct buffer_head * get_FEB (struct tree_balance *);
+
+/* bitmap.c */
+
+/* structure contains hints for block allocator, and it is a container for
+ * arguments, such as node, search path, transaction_handle, etc. */
+ struct __reiserfs_blocknr_hint {
+     struct inode * inode;		/* inode passed to allocator, if we allocate unf. nodes */
+     long block;			/* file offset, in blocks */
+     struct reiserfs_key key;
+     struct path * path;		/* search path, used by allocator to deternine search_start by
+					 * various ways */
+     struct reiserfs_transaction_handle * th; /* transaction handle is needed to log super blocks and
+					       * bitmap blocks changes  */
+     b_blocknr_t beg, end;
+     b_blocknr_t search_start;		/* a field used to transfer search start value (block number)
+					 * between different block allocator procedures
+					 * (determine_search_start() and others) */
+    int prealloc_size;			/* is set in determine_prealloc_size() function, used by underlayed
+					 * function that do actual allocation */
+
+    unsigned formatted_node:1;		/* the allocator uses different polices for getting disk space for
+					 * formatted/unformatted blocks with/without preallocation */
+    unsigned preallocate:1;
+};
+
+typedef struct __reiserfs_blocknr_hint reiserfs_blocknr_hint_t;
+
+int reiserfs_parse_alloc_options (struct super_block *, char *);
+void reiserfs_init_alloc_options (struct super_block *s);
+
+/*
+ * given a directory, this will tell you what packing locality
+ * to use for a new object underneat it.  The locality is returned
+ * in disk byte order (le).
+ */
+u32 reiserfs_choose_packing(struct inode *dir);
+
+int is_reusable (struct super_block * s, b_blocknr_t block, int bit_value);
+void reiserfs_free_block (struct reiserfs_transaction_handle *th, struct inode *, b_blocknr_t, int for_unformatted);
+int reiserfs_allocate_blocknrs(reiserfs_blocknr_hint_t *, b_blocknr_t * , int, int);
+extern inline int reiserfs_new_form_blocknrs (struct tree_balance * tb,
+					      b_blocknr_t *new_blocknrs, int amount_needed)
+{
+    reiserfs_blocknr_hint_t hint = {
+	.th = tb->transaction_handle,
+	.path = tb->tb_path,
+	.inode = NULL,
+	.key = tb->key,
+	.block = 0,
+	.formatted_node = 1
+    };
+    return reiserfs_allocate_blocknrs(&hint, new_blocknrs, amount_needed, 0);
+}
+
+extern inline int reiserfs_new_unf_blocknrs (struct reiserfs_transaction_handle *th,
+					     struct inode *inode,
+					     b_blocknr_t *new_blocknrs,
+					     struct path * path, long block)
+{
+    reiserfs_blocknr_hint_t hint = {
+	.th = th,
+	.path = path,
+	.inode = inode,
+	.block = block,
+	.formatted_node = 0,
+	.preallocate = 0
+    };
+    return reiserfs_allocate_blocknrs(&hint, new_blocknrs, 1, 0);
+}
+
+#ifdef REISERFS_PREALLOCATE
+extern inline int reiserfs_new_unf_blocknrs2(struct reiserfs_transaction_handle *th,
+					     struct inode * inode,
+					     b_blocknr_t *new_blocknrs,
+					     struct path * path, long block)
+{
+    reiserfs_blocknr_hint_t hint = {
+	.th = th,
+	.path = path,
+	.inode = inode,
+	.block = block,
+	.formatted_node = 0,
+	.preallocate = 1
+    };
+    return reiserfs_allocate_blocknrs(&hint, new_blocknrs, 1, 0);
+}
+
+void reiserfs_discard_prealloc (struct reiserfs_transaction_handle *th, 
+				struct inode * inode);
+void reiserfs_discard_all_prealloc (struct reiserfs_transaction_handle *th);
+#endif
+void reiserfs_claim_blocks_to_be_allocated( struct super_block *sb, int blocks);
+void reiserfs_release_claimed_blocks( struct super_block *sb, int blocks);
+int reiserfs_can_fit_pages(struct super_block *sb);
+
+/* hashes.c */
+__u32 keyed_hash (const signed char *msg, int len);
+__u32 yura_hash (const signed char *msg, int len);
+__u32 r5_hash (const signed char *msg, int len);
+
+/* the ext2 bit routines adjust for big or little endian as
+** appropriate for the arch, so in our laziness we use them rather
+** than using the bit routines they call more directly.  These
+** routines must be used when changing on disk bitmaps.  */
+#define reiserfs_test_and_set_le_bit   ext2_set_bit
+#define reiserfs_test_and_clear_le_bit ext2_clear_bit
+#define reiserfs_test_le_bit           ext2_test_bit
+#define reiserfs_find_next_zero_le_bit ext2_find_next_zero_bit
+
+/* sometimes reiserfs_truncate may require to allocate few new blocks
+   to perform indirect2direct conversion. People probably used to
+   think, that truncate should work without problems on a filesystem
+   without free disk space. They may complain that they can not
+   truncate due to lack of free disk space. This spare space allows us
+   to not worry about it. 500 is probably too much, but it should be
+   absolutely safe */
+#define SPARE_SPACE 500
+
+
+/* prototypes from ioctl.c */
+int reiserfs_ioctl (struct inode * inode, struct file * filp, 
+ 		    unsigned int cmd, unsigned long arg);
+ 
+/* ioctl's command */
+#define REISERFS_IOC_UNPACK		_IOW(0xCD,1,long)
+/* define following flags to be the same as in ext2, so that chattr(1),
+   lsattr(1) will work with us. */
+#define REISERFS_IOC_GETFLAGS		EXT2_IOC_GETFLAGS
+#define REISERFS_IOC_SETFLAGS		EXT2_IOC_SETFLAGS
+#define REISERFS_IOC_GETVERSION		EXT2_IOC_GETVERSION
+#define REISERFS_IOC_SETVERSION		EXT2_IOC_SETVERSION
+
+/* Locking primitives */
+/* Right now we are still falling back to (un)lock_kernel, but eventually that
+   would evolve into real per-fs locks */
+#define reiserfs_write_lock( sb ) lock_kernel()
+#define reiserfs_write_unlock( sb ) unlock_kernel()
+ 			         
+/* xattr stuff */
+#define REISERFS_XATTR_DIR_SEM(s) (REISERFS_SB(s)->xattr_dir_sem)
+
+#endif /* _LINUX_REISER_FS_H */
+
+
diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h
new file mode 100644
index 000000000000..e321eb050d65
--- /dev/null
+++ b/include/linux/reiserfs_fs_i.h
@@ -0,0 +1,63 @@
+#ifndef _REISER_FS_I
+#define _REISER_FS_I
+
+#include <linux/list.h>
+
+struct reiserfs_journal_list;
+
+/** bitmasks for i_flags field in reiserfs-specific part of inode */
+typedef enum {
+    /** this says what format of key do all items (but stat data) of
+      an object have.  If this is set, that format is 3.6 otherwise
+      - 3.5 */
+    i_item_key_version_mask    =  0x0001,
+    /** If this is unset, object has 3.5 stat data, otherwise, it has
+      3.6 stat data with 64bit size, 32bit nlink etc. */
+    i_stat_data_version_mask   =  0x0002,
+    /** file might need tail packing on close */
+    i_pack_on_close_mask       =  0x0004,
+    /** don't pack tail of file */
+    i_nopack_mask              =  0x0008,
+    /** If those is set, "safe link" was created for this file during
+      truncate or unlink. Safe link is used to avoid leakage of disk
+      space on crash with some files open, but unlinked. */
+    i_link_saved_unlink_mask   =  0x0010,
+    i_link_saved_truncate_mask =  0x0020,
+    i_has_xattr_dir            =  0x0040,
+    i_data_log	               =  0x0080,
+} reiserfs_inode_flags;
+
+
+struct reiserfs_inode_info {
+    __u32 i_key [4];/* key is still 4 32 bit integers */
+    /** transient inode flags that are never stored on disk. Bitmasks
+      for this field are defined above. */
+    __u32 i_flags;
+
+    __u32 i_first_direct_byte; // offset of first byte stored in direct item.
+
+    /* copy of persistent inode flags read from sd_attrs. */
+    __u32 i_attrs;
+
+    int i_prealloc_block; /* first unused block of a sequence of unused blocks */
+    int i_prealloc_count; /* length of that sequence */
+    struct list_head i_prealloc_list; /* per-transaction list of inodes which
+                                       * have preallocated blocks */
+
+    unsigned new_packing_locality:1;  /* new_packig_locality is created; new blocks
+				       * for the contents of this directory should be
+				       * displaced */
+
+    /* we use these for fsync or O_SYNC to decide which transaction
+    ** needs to be committed in order for this inode to be properly
+    ** flushed */
+    unsigned long i_trans_id ;
+    struct reiserfs_journal_list *i_jl;
+
+    struct posix_acl *i_acl_access;
+    struct posix_acl *i_acl_default;
+    struct rw_semaphore xattr_sem;
+    struct inode vfs_inode;
+};
+
+#endif
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
new file mode 100644
index 000000000000..37a3a7afbec7
--- /dev/null
+++ b/include/linux/reiserfs_fs_sb.h
@@ -0,0 +1,535 @@
+/* Copyright 1996-2000 Hans Reiser, see reiserfs/README for licensing
+ * and copyright details */
+
+#ifndef _LINUX_REISER_FS_SB
+#define _LINUX_REISER_FS_SB
+
+#ifdef __KERNEL__
+#include <linux/workqueue.h>
+#include <linux/rwsem.h>
+#endif
+
+typedef enum {
+  reiserfs_attrs_cleared	= 0x00000001,
+} reiserfs_super_block_flags;
+
+/* struct reiserfs_super_block accessors/mutators
+ * since this is a disk structure, it will always be in 
+ * little endian format. */
+#define sb_block_count(sbp)         (le32_to_cpu((sbp)->s_v1.s_block_count))
+#define set_sb_block_count(sbp,v)   ((sbp)->s_v1.s_block_count = cpu_to_le32(v))
+#define sb_free_blocks(sbp)         (le32_to_cpu((sbp)->s_v1.s_free_blocks))
+#define set_sb_free_blocks(sbp,v)   ((sbp)->s_v1.s_free_blocks = cpu_to_le32(v))
+#define sb_root_block(sbp)          (le32_to_cpu((sbp)->s_v1.s_root_block))
+#define set_sb_root_block(sbp,v)    ((sbp)->s_v1.s_root_block = cpu_to_le32(v))
+
+#define sb_jp_journal_1st_block(sbp)  \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_1st_block))
+#define set_sb_jp_journal_1st_block(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_1st_block = cpu_to_le32(v))
+#define sb_jp_journal_dev(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_dev))
+#define set_sb_jp_journal_dev(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_dev = cpu_to_le32(v))
+#define sb_jp_journal_size(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_size))
+#define set_sb_jp_journal_size(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_size = cpu_to_le32(v))
+#define sb_jp_journal_trans_max(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_trans_max))
+#define set_sb_jp_journal_trans_max(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_trans_max = cpu_to_le32(v))
+#define sb_jp_journal_magic(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_magic))
+#define set_sb_jp_journal_magic(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_magic = cpu_to_le32(v))
+#define sb_jp_journal_max_batch(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_max_batch))
+#define set_sb_jp_journal_max_batch(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_max_batch = cpu_to_le32(v))
+#define sb_jp_jourmal_max_commit_age(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_journal.jp_journal_max_commit_age))
+#define set_sb_jp_journal_max_commit_age(sbp,v) \
+              ((sbp)->s_v1.s_journal.jp_journal_max_commit_age = cpu_to_le32(v))
+
+#define sb_blocksize(sbp)          (le16_to_cpu((sbp)->s_v1.s_blocksize))
+#define set_sb_blocksize(sbp,v)    ((sbp)->s_v1.s_blocksize = cpu_to_le16(v))
+#define sb_oid_maxsize(sbp)        (le16_to_cpu((sbp)->s_v1.s_oid_maxsize))
+#define set_sb_oid_maxsize(sbp,v)  ((sbp)->s_v1.s_oid_maxsize = cpu_to_le16(v))
+#define sb_oid_cursize(sbp)        (le16_to_cpu((sbp)->s_v1.s_oid_cursize))
+#define set_sb_oid_cursize(sbp,v)  ((sbp)->s_v1.s_oid_cursize = cpu_to_le16(v))
+#define sb_umount_state(sbp)       (le16_to_cpu((sbp)->s_v1.s_umount_state))
+#define set_sb_umount_state(sbp,v) ((sbp)->s_v1.s_umount_state = cpu_to_le16(v))
+#define sb_fs_state(sbp)           (le16_to_cpu((sbp)->s_v1.s_fs_state))
+#define set_sb_fs_state(sbp,v)     ((sbp)->s_v1.s_fs_state = cpu_to_le16(v)) 
+#define sb_hash_function_code(sbp) \
+              (le32_to_cpu((sbp)->s_v1.s_hash_function_code))
+#define set_sb_hash_function_code(sbp,v) \
+              ((sbp)->s_v1.s_hash_function_code = cpu_to_le32(v))
+#define sb_tree_height(sbp)        (le16_to_cpu((sbp)->s_v1.s_tree_height))
+#define set_sb_tree_height(sbp,v)  ((sbp)->s_v1.s_tree_height = cpu_to_le16(v))
+#define sb_bmap_nr(sbp)            (le16_to_cpu((sbp)->s_v1.s_bmap_nr))
+#define set_sb_bmap_nr(sbp,v)      ((sbp)->s_v1.s_bmap_nr = cpu_to_le16(v))
+#define sb_version(sbp)            (le16_to_cpu((sbp)->s_v1.s_version))
+#define set_sb_version(sbp,v)      ((sbp)->s_v1.s_version = cpu_to_le16(v))
+
+#define sb_reserved_for_journal(sbp) \
+              (le16_to_cpu((sbp)->s_v1.s_reserved_for_journal))
+#define set_sb_reserved_for_journal(sbp,v) \
+              ((sbp)->s_v1.s_reserved_for_journal = cpu_to_le16(v))
+
+/* LOGGING -- */
+
+/* These all interelate for performance.  
+**
+** If the journal block count is smaller than n transactions, you lose speed. 
+** I don't know what n is yet, I'm guessing 8-16.
+**
+** typical transaction size depends on the application, how often fsync is
+** called, and how many metadata blocks you dirty in a 30 second period.  
+** The more small files (<16k) you use, the larger your transactions will
+** be.
+** 
+** If your journal fills faster than dirty buffers get flushed to disk, it must flush them before allowing the journal
+** to wrap, which slows things down.  If you need high speed meta data updates, the journal should be big enough
+** to prevent wrapping before dirty meta blocks get to disk.
+**
+** If the batch max is smaller than the transaction max, you'll waste space at the end of the journal
+** because journal_end sets the next transaction to start at 0 if the next transaction has any chance of wrapping.
+**
+** The large the batch max age, the better the speed, and the more meta data changes you'll lose after a crash.
+**
+*/
+
+/* don't mess with these for a while */
+				/* we have a node size define somewhere in reiserfs_fs.h. -Hans */
+#define JOURNAL_BLOCK_SIZE  4096 /* BUG gotta get rid of this */
+#define JOURNAL_MAX_CNODE   1500 /* max cnodes to allocate. */
+#define JOURNAL_HASH_SIZE 8192   
+#define JOURNAL_NUM_BITMAPS 5 /* number of copies of the bitmaps to have floating.  Must be >= 2 */
+
+/* One of these for every block in every transaction
+** Each one is in two hash tables.  First, a hash of the current transaction, and after journal_end, a
+** hash of all the in memory transactions.
+** next and prev are used by the current transaction (journal_hash).
+** hnext and hprev are used by journal_list_hash.  If a block is in more than one transaction, the journal_list_hash
+** links it in multiple times.  This allows flush_journal_list to remove just the cnode belonging
+** to a given transaction.
+*/
+struct reiserfs_journal_cnode {
+  struct buffer_head *bh ;		 /* real buffer head */
+  struct super_block *sb ;		 /* dev of real buffer head */
+  __u32 blocknr ;		 /* block number of real buffer head, == 0 when buffer on disk */
+  long state ;
+  struct reiserfs_journal_list *jlist ;  /* journal list this cnode lives in */
+  struct reiserfs_journal_cnode *next ;  /* next in transaction list */
+  struct reiserfs_journal_cnode *prev ;  /* prev in transaction list */
+  struct reiserfs_journal_cnode *hprev ; /* prev in hash list */
+  struct reiserfs_journal_cnode *hnext ; /* next in hash list */
+};
+
+struct reiserfs_bitmap_node {
+  int id ;
+  char *data ;
+  struct list_head list ;
+} ;
+
+struct reiserfs_list_bitmap {
+  struct reiserfs_journal_list *journal_list ;
+  struct reiserfs_bitmap_node **bitmaps ;
+} ;
+
+/*
+** one of these for each transaction.  The most important part here is the j_realblock.
+** this list of cnodes is used to hash all the blocks in all the commits, to mark all the
+** real buffer heads dirty once all the commits hit the disk,
+** and to make sure every real block in a transaction is on disk before allowing the log area
+** to be overwritten */
+struct reiserfs_journal_list {
+  unsigned long j_start ;
+  unsigned long j_state;
+  unsigned long j_len ;
+  atomic_t j_nonzerolen ;
+  atomic_t j_commit_left ;
+  atomic_t j_older_commits_done ;      /* all commits older than this on disk*/
+  struct semaphore j_commit_lock;
+  unsigned long j_trans_id ;
+  time_t j_timestamp ;
+  struct reiserfs_list_bitmap *j_list_bitmap ;
+  struct buffer_head *j_commit_bh ; /* commit buffer head */
+  struct reiserfs_journal_cnode *j_realblock  ;
+  struct reiserfs_journal_cnode *j_freedlist ; /* list of buffers that were freed during this trans.  free each of these on flush */
+  /* time ordered list of all active transactions */
+  struct list_head j_list;
+
+  /* time ordered list of all transactions we haven't tried to flush yet */
+  struct list_head j_working_list;
+
+  /* list of tail conversion targets in need of flush before commit */
+  struct list_head j_tail_bh_list;
+  /* list of data=ordered buffers in need of flush before commit */
+  struct list_head j_bh_list;
+  int j_refcount;
+} ;
+
+struct reiserfs_journal {
+  struct buffer_head ** j_ap_blocks ; /* journal blocks on disk */
+  struct reiserfs_journal_cnode *j_last ; /* newest journal block */
+  struct reiserfs_journal_cnode *j_first ; /*  oldest journal block.  start here for traverse */
+
+  struct file         *j_dev_file;
+  struct block_device *j_dev_bd;  
+  int j_1st_reserved_block;     /* first block on s_dev of reserved area journal */        
+	
+  long j_state ;			
+  unsigned long j_trans_id ;
+  unsigned long j_mount_id ;
+  unsigned long j_start ;             /* start of current waiting commit (index into j_ap_blocks) */
+  unsigned long j_len ;               /* lenght of current waiting commit */
+  unsigned long j_len_alloc ;         /* number of buffers requested by journal_begin() */
+  atomic_t j_wcount ;            /* count of writers for current commit */
+  unsigned long j_bcount ;            /* batch count. allows turning X transactions into 1 */
+  unsigned long j_first_unflushed_offset ;  /* first unflushed transactions offset */
+  unsigned long j_last_flush_trans_id ;    /* last fully flushed journal timestamp */
+  struct buffer_head *j_header_bh ;   
+
+  time_t j_trans_start_time ;         /* time this transaction started */
+  struct semaphore j_lock;
+  struct semaphore j_flush_sem;
+  wait_queue_head_t j_join_wait ;    /* wait for current transaction to finish before starting new one */
+  atomic_t j_jlock ;                       /* lock for j_join_wait */
+  int j_list_bitmap_index ;	      /* number of next list bitmap to use */
+  int j_must_wait ;		       /* no more journal begins allowed. MUST sleep on j_join_wait */
+  int j_next_full_flush ;             /* next journal_end will flush all journal list */
+  int j_next_async_flush ;             /* next journal_end will flush all async commits */
+
+  int j_cnode_used ;	      /* number of cnodes on the used list */
+  int j_cnode_free ;          /* number of cnodes on the free list */
+
+  unsigned int j_trans_max ;           /* max number of blocks in a transaction.  */
+  unsigned int j_max_batch ;           /* max number of blocks to batch into a trans */
+  unsigned int j_max_commit_age ;      /* in seconds, how old can an async commit be */
+  unsigned int j_max_trans_age ;       /* in seconds, how old can a transaction be */
+  unsigned int j_default_max_commit_age ; /* the default for the max commit age */
+
+  struct reiserfs_journal_cnode *j_cnode_free_list ;
+  struct reiserfs_journal_cnode *j_cnode_free_orig ; /* orig pointer returned from vmalloc */
+
+  struct reiserfs_journal_list *j_current_jl;
+  int j_free_bitmap_nodes ;
+  int j_used_bitmap_nodes ;
+
+  int j_num_lists;      /* total number of active transactions */
+  int j_num_work_lists; /* number that need attention from kreiserfsd */
+
+  /* debugging to make sure things are flushed in order */
+  int j_last_flush_id;
+
+  /* debugging to make sure things are committed in order */
+  int j_last_commit_id;
+
+  struct list_head j_bitmap_nodes ;
+  struct list_head j_dirty_buffers ;
+  spinlock_t j_dirty_buffers_lock ; /* protects j_dirty_buffers */
+
+  /* list of all active transactions */
+  struct list_head j_journal_list;
+  /* lists that haven't been touched by writeback attempts */
+  struct list_head j_working_list;
+
+  struct reiserfs_list_bitmap j_list_bitmap[JOURNAL_NUM_BITMAPS] ;	/* array of bitmaps to record the deleted blocks */
+  struct reiserfs_journal_cnode *j_hash_table[JOURNAL_HASH_SIZE] ; 	    /* hash table for real buffer heads in current trans */ 
+  struct reiserfs_journal_cnode *j_list_hash_table[JOURNAL_HASH_SIZE] ; /* hash table for all the real buffer heads in all 
+  										the transactions */
+  struct list_head j_prealloc_list;     /* list of inodes which have preallocated blocks */
+  int j_persistent_trans;
+  unsigned long j_max_trans_size ;
+  unsigned long j_max_batch_size ;
+
+  int j_errno;
+
+  /* when flushing ordered buffers, throttle new ordered writers */
+  struct work_struct j_work;
+  atomic_t j_async_throttle;
+};
+
+enum journal_state_bits {
+    J_WRITERS_BLOCKED = 1,   /* set when new writers not allowed */
+    J_WRITERS_QUEUED,        /* set when log is full due to too many writers */
+    J_ABORTED,               /* set when log is aborted */
+};
+
+
+#define JOURNAL_DESC_MAGIC "ReIsErLB" /* ick.  magic string to find desc blocks in the journal */
+
+typedef __u32 (*hashf_t) (const signed char *, int);
+
+struct reiserfs_bitmap_info
+{
+    // FIXME: Won't work with block sizes > 8K
+    __u16  first_zero_hint;
+    __u16  free_count;
+    struct buffer_head *bh; /* the actual bitmap */
+};
+
+struct proc_dir_entry;
+
+#if defined( CONFIG_PROC_FS ) && defined( CONFIG_REISERFS_PROC_INFO )
+typedef unsigned long int stat_cnt_t;
+typedef struct reiserfs_proc_info_data
+{
+  spinlock_t lock;
+  int exiting;
+  int max_hash_collisions;
+
+  stat_cnt_t breads;
+  stat_cnt_t bread_miss;
+  stat_cnt_t search_by_key;
+  stat_cnt_t search_by_key_fs_changed;
+  stat_cnt_t search_by_key_restarted;
+
+  stat_cnt_t insert_item_restarted;
+  stat_cnt_t paste_into_item_restarted;
+  stat_cnt_t cut_from_item_restarted;
+  stat_cnt_t delete_solid_item_restarted;
+  stat_cnt_t delete_item_restarted;
+
+  stat_cnt_t leaked_oid;
+  stat_cnt_t leaves_removable;
+
+  /* balances per level. Use explicit 5 as MAX_HEIGHT is not visible yet. */
+  stat_cnt_t balance_at[ 5 ]; /* XXX */
+  /* sbk == search_by_key */
+  stat_cnt_t sbk_read_at[ 5 ]; /* XXX */
+  stat_cnt_t sbk_fs_changed[ 5 ];
+  stat_cnt_t sbk_restarted[ 5 ];
+  stat_cnt_t items_at[ 5 ]; /* XXX */
+  stat_cnt_t free_at[ 5 ]; /* XXX */
+  stat_cnt_t can_node_be_removed[ 5 ]; /* XXX */
+  long int lnum[ 5 ]; /* XXX */
+  long int rnum[ 5 ]; /* XXX */
+  long int lbytes[ 5 ]; /* XXX */
+  long int rbytes[ 5 ]; /* XXX */
+  stat_cnt_t get_neighbors[ 5 ];
+  stat_cnt_t get_neighbors_restart[ 5 ];
+  stat_cnt_t need_l_neighbor[ 5 ];
+  stat_cnt_t need_r_neighbor[ 5 ];
+
+  stat_cnt_t free_block;
+  struct __scan_bitmap_stats {
+	stat_cnt_t call;
+	stat_cnt_t wait;
+	stat_cnt_t bmap;
+	stat_cnt_t retry;
+	stat_cnt_t in_journal_hint;
+	stat_cnt_t in_journal_nohint;
+	stat_cnt_t stolen;
+  } scan_bitmap;
+  struct __journal_stats {
+	stat_cnt_t in_journal;
+	stat_cnt_t in_journal_bitmap;
+	stat_cnt_t in_journal_reusable;
+	stat_cnt_t lock_journal;
+	stat_cnt_t lock_journal_wait;
+	stat_cnt_t journal_being;
+	stat_cnt_t journal_relock_writers;
+	stat_cnt_t journal_relock_wcount;
+	stat_cnt_t mark_dirty;
+	stat_cnt_t mark_dirty_already;
+	stat_cnt_t mark_dirty_notjournal;
+	stat_cnt_t restore_prepared;
+	stat_cnt_t prepare;
+	stat_cnt_t prepare_retry;
+  } journal;
+} reiserfs_proc_info_data_t;
+#else
+typedef struct reiserfs_proc_info_data
+{} reiserfs_proc_info_data_t;
+#endif
+
+/* reiserfs union of in-core super block data */
+struct reiserfs_sb_info
+{
+    struct buffer_head * s_sbh;                   /* Buffer containing the super block */
+				/* both the comment and the choice of
+                                   name are unclear for s_rs -Hans */
+    struct reiserfs_super_block * s_rs;           /* Pointer to the super block in the buffer */
+    struct reiserfs_bitmap_info * s_ap_bitmap;
+    struct reiserfs_journal *s_journal ;		/* pointer to journal information */
+    unsigned short s_mount_state;                 /* reiserfs state (valid, invalid) */
+  
+				/* Comment? -Hans */
+    void (*end_io_handler)(struct buffer_head *, int);
+    hashf_t s_hash_function;	/* pointer to function which is used
+                                   to sort names in directory. Set on
+                                   mount */
+    unsigned long s_mount_opt;	/* reiserfs's mount options are set
+                                   here (currently - NOTAIL, NOLOG,
+                                   REPLAYONLY) */
+
+    struct {			/* This is a structure that describes block allocator options */
+	unsigned long bits;	/* Bitfield for enable/disable kind of options */
+	unsigned long large_file_size; /* size started from which we consider file to be a large one(in blocks) */
+	int border;		/* percentage of disk, border takes */
+	int preallocmin;	/* Minimal file size (in blocks) starting from which we do preallocations */
+	int preallocsize;	/* Number of blocks we try to prealloc when file
+				   reaches preallocmin size (in blocks) or
+				   prealloc_list is empty. */
+    } s_alloc_options;
+
+				/* Comment? -Hans */
+    wait_queue_head_t s_wait;
+				/* To be obsoleted soon by per buffer seals.. -Hans */
+    atomic_t s_generation_counter; // increased by one every time the
+    // tree gets re-balanced
+    unsigned long s_properties;    /* File system properties. Currently holds
+				     on-disk FS format */
+    
+    /* session statistics */
+    int s_kmallocs;
+    int s_disk_reads;
+    int s_disk_writes;
+    int s_fix_nodes;
+    int s_do_balance;
+    int s_unneeded_left_neighbor;
+    int s_good_search_by_key_reada;
+    int s_bmaps;
+    int s_bmaps_without_search;
+    int s_direct2indirect;
+    int s_indirect2direct;
+	/* set up when it's ok for reiserfs_read_inode2() to read from
+	   disk inode with nlink==0. Currently this is only used during
+	   finish_unfinished() processing at mount time */
+    int s_is_unlinked_ok;
+    reiserfs_proc_info_data_t s_proc_info_data;
+    struct proc_dir_entry *procdir;
+    int reserved_blocks; /* amount of blocks reserved for further allocations */
+    spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */
+    struct dentry *priv_root; /* root of /.reiserfs_priv */
+    struct dentry *xattr_root; /* root of /.reiserfs_priv/.xa */
+    struct rw_semaphore xattr_dir_sem;
+
+    int j_errno;
+#ifdef CONFIG_QUOTA
+    char *s_qf_names[MAXQUOTAS];
+    int s_jquota_fmt;
+#endif
+};
+
+/* Definitions of reiserfs on-disk properties: */
+#define REISERFS_3_5 0
+#define REISERFS_3_6 1
+
+enum reiserfs_mount_options {
+/* Mount options */
+    REISERFS_LARGETAIL,  /* large tails will be created in a session */
+    REISERFS_SMALLTAIL,  /* small (for files less than block size) tails will be created in a session */
+    REPLAYONLY, /* replay journal and return 0. Use by fsck */
+    REISERFS_CONVERT,    /* -o conv: causes conversion of old
+                                 format super block to the new
+                                 format. If not specified - old
+                                 partition will be dealt with in a
+                                 manner of 3.5.x */
+
+/* -o hash={tea, rupasov, r5, detect} is meant for properly mounting 
+** reiserfs disks from 3.5.19 or earlier.  99% of the time, this option
+** is not required.  If the normal autodection code can't determine which
+** hash to use (because both hases had the same value for a file)
+** use this option to force a specific hash.  It won't allow you to override
+** the existing hash on the FS, so if you have a tea hash disk, and mount
+** with -o hash=rupasov, the mount will fail.
+*/
+    FORCE_TEA_HASH,      /* try to force tea hash on mount */
+    FORCE_RUPASOV_HASH,  /* try to force rupasov hash on mount */
+    FORCE_R5_HASH,       /* try to force rupasov hash on mount */
+    FORCE_HASH_DETECT,   /* try to detect hash function on mount */
+
+    REISERFS_DATA_LOG,
+    REISERFS_DATA_ORDERED,
+    REISERFS_DATA_WRITEBACK,
+
+/* used for testing experimental features, makes benchmarking new
+   features with and without more convenient, should never be used by
+   users in any code shipped to users (ideally) */
+
+    REISERFS_NO_BORDER,
+    REISERFS_NO_UNHASHED_RELOCATION,
+    REISERFS_HASHED_RELOCATION,
+    REISERFS_ATTRS,
+    REISERFS_XATTRS,
+    REISERFS_XATTRS_USER,
+    REISERFS_POSIXACL,
+    REISERFS_BARRIER_NONE,
+    REISERFS_BARRIER_FLUSH,
+
+    /* Actions on error */
+    REISERFS_ERROR_PANIC,
+    REISERFS_ERROR_RO,
+    REISERFS_ERROR_CONTINUE,
+
+    REISERFS_TEST1,
+    REISERFS_TEST2,
+    REISERFS_TEST3,
+    REISERFS_TEST4,
+    REISERFS_UNSUPPORTED_OPT,
+};
+
+#define reiserfs_r5_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_R5_HASH))
+#define reiserfs_rupasov_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_RUPASOV_HASH))
+#define reiserfs_tea_hash(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_TEA_HASH))
+#define reiserfs_hash_detect(s) (REISERFS_SB(s)->s_mount_opt & (1 << FORCE_HASH_DETECT))
+#define reiserfs_no_border(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_NO_BORDER))
+#define reiserfs_no_unhashed_relocation(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_NO_UNHASHED_RELOCATION))
+#define reiserfs_hashed_relocation(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_HASHED_RELOCATION))
+#define reiserfs_test4(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_TEST4))
+
+#define have_large_tails(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_LARGETAIL))
+#define have_small_tails(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_SMALLTAIL))
+#define replay_only(s) (REISERFS_SB(s)->s_mount_opt & (1 << REPLAYONLY))
+#define reiserfs_attrs(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ATTRS))
+#define old_format_only(s) (REISERFS_SB(s)->s_properties & (1 << REISERFS_3_5))
+#define convert_reiserfs(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_CONVERT))
+#define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
+#define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
+#define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
+#define reiserfs_xattrs(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS))
+#define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
+#define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
+#define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
+#define reiserfs_barrier_none(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_NONE))
+#define reiserfs_barrier_flush(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_FLUSH))
+
+#define reiserfs_error_panic(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ERROR_PANIC))
+#define reiserfs_error_ro(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_ERROR_RO))
+
+void reiserfs_file_buffer (struct buffer_head * bh, int list);
+extern struct file_system_type reiserfs_fs_type;
+int reiserfs_resize(struct super_block *, unsigned long) ;
+
+#define CARRY_ON                0
+#define SCHEDULE_OCCURRED       1
+
+
+#define SB_BUFFER_WITH_SB(s) (REISERFS_SB(s)->s_sbh)
+#define SB_JOURNAL(s) (REISERFS_SB(s)->s_journal)
+#define SB_JOURNAL_1st_RESERVED_BLOCK(s) (SB_JOURNAL(s)->j_1st_reserved_block)
+#define SB_JOURNAL_LEN_FREE(s) (SB_JOURNAL(s)->j_journal_len_free) 
+#define SB_AP_BITMAP(s) (REISERFS_SB(s)->s_ap_bitmap)
+
+#define SB_DISK_JOURNAL_HEAD(s) (SB_JOURNAL(s)->j_header_bh->)
+
+/* A safe version of the "bdevname", which returns the "s_id" field of
+ * a superblock or else "Null superblock" if the super block is NULL.
+ */
+static inline char *reiserfs_bdevname(struct super_block *s)
+{
+        return (s == NULL) ? "Null superblock" : s -> s_id;
+}
+
+#define reiserfs_is_journal_aborted(journal) (unlikely (__reiserfs_is_journal_aborted (journal)))
+static inline int __reiserfs_is_journal_aborted (struct reiserfs_journal *journal)
+{
+    return test_bit (J_ABORTED, &journal->j_state);
+}
+
+#endif	/* _LINUX_REISER_FS_SB */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
new file mode 100644
index 000000000000..1eaa48eca811
--- /dev/null
+++ b/include/linux/reiserfs_xattr.h
@@ -0,0 +1,139 @@
+/*
+  File: linux/reiserfs_xattr.h
+*/
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/xattr.h>
+
+/* Magic value in header */
+#define REISERFS_XATTR_MAGIC 0x52465841 /* "RFXA" */
+
+struct reiserfs_xattr_header {
+    __u32 h_magic;              /* magic number for identification */
+    __u32 h_hash;               /* hash of the value */
+};
+
+#ifdef __KERNEL__
+
+struct reiserfs_xattr_handler {
+	char *prefix;
+        int (*init)(void);
+        void (*exit)(void);
+	int (*get)(struct inode *inode, const char *name, void *buffer,
+		   size_t size);
+	int (*set)(struct inode *inode, const char *name, const void *buffer,
+		   size_t size, int flags);
+	int (*del)(struct inode *inode, const char *name);
+        int (*list)(struct inode *inode, const char *name, int namelen, char *out);
+        struct list_head handlers;
+};
+
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+#define is_reiserfs_priv_object(inode) IS_PRIVATE(inode)
+#define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
+ssize_t reiserfs_getxattr (struct dentry *dentry, const char *name,
+			   void *buffer, size_t size);
+int reiserfs_setxattr (struct dentry *dentry, const char *name,
+                       const void *value, size_t size, int flags);
+ssize_t reiserfs_listxattr (struct dentry *dentry, char *buffer, size_t size);
+int reiserfs_removexattr (struct dentry *dentry, const char *name);
+int reiserfs_delete_xattrs (struct inode *inode);
+int reiserfs_chown_xattrs (struct inode *inode, struct iattr *attrs);
+int reiserfs_xattr_init (struct super_block *sb, int mount_flags);
+int reiserfs_permission (struct inode *inode, int mask, struct nameidata *nd);
+int reiserfs_permission_locked (struct inode *inode, int mask, struct nameidata *nd);
+
+int reiserfs_xattr_del (struct inode *, const char *);
+int reiserfs_xattr_get (const struct inode *, const char *, void *, size_t);
+int reiserfs_xattr_set (struct inode *, const char *, const void *,
+                               size_t, int);
+
+extern struct reiserfs_xattr_handler user_handler;
+extern struct reiserfs_xattr_handler trusted_handler;
+#ifdef CONFIG_REISERFS_FS_SECURITY
+extern struct reiserfs_xattr_handler security_handler;
+#endif
+
+int reiserfs_xattr_register_handlers (void) __init;
+void reiserfs_xattr_unregister_handlers (void);
+
+static inline void
+reiserfs_write_lock_xattrs(struct super_block *sb)
+{
+    down_write (&REISERFS_XATTR_DIR_SEM(sb));
+}
+static inline void
+reiserfs_write_unlock_xattrs(struct super_block *sb)
+{
+    up_write (&REISERFS_XATTR_DIR_SEM(sb));
+}
+static inline void
+reiserfs_read_lock_xattrs(struct super_block *sb)
+{
+    down_read (&REISERFS_XATTR_DIR_SEM(sb));
+}
+
+static inline void
+reiserfs_read_unlock_xattrs(struct super_block *sb)
+{
+    up_read (&REISERFS_XATTR_DIR_SEM(sb));
+}
+
+static inline void
+reiserfs_write_lock_xattr_i(struct inode *inode)
+{
+    down_write (&REISERFS_I(inode)->xattr_sem);
+}
+static inline void
+reiserfs_write_unlock_xattr_i(struct inode *inode)
+{
+    up_write (&REISERFS_I(inode)->xattr_sem);
+}
+static inline void
+reiserfs_read_lock_xattr_i(struct inode *inode)
+{
+    down_read (&REISERFS_I(inode)->xattr_sem);
+}
+
+static inline void
+reiserfs_read_unlock_xattr_i(struct inode *inode)
+{
+    up_read (&REISERFS_I(inode)->xattr_sem);
+}
+
+static inline void
+reiserfs_mark_inode_private(struct inode *inode)
+{
+    inode->i_flags |= S_PRIVATE;
+}
+
+#else
+
+#define is_reiserfs_priv_object(inode) 0
+#define reiserfs_mark_inode_private(inode)
+#define reiserfs_getxattr NULL
+#define reiserfs_setxattr NULL
+#define reiserfs_listxattr NULL
+#define reiserfs_removexattr NULL
+#define reiserfs_write_lock_xattrs(sb)
+#define reiserfs_write_unlock_xattrs(sb)
+#define reiserfs_read_lock_xattrs(sb)
+#define reiserfs_read_unlock_xattrs(sb)
+
+#define reiserfs_permission NULL
+
+#define reiserfs_xattr_register_handlers() 0
+#define reiserfs_xattr_unregister_handlers()
+
+static inline int reiserfs_delete_xattrs (struct inode *inode) { return 0; };
+static inline int reiserfs_chown_xattrs (struct inode *inode, struct iattr *attrs) { return 0; };
+static inline int reiserfs_xattr_init (struct super_block *sb, int mount_flags)
+{
+    sb->s_flags = (sb->s_flags & ~MS_POSIXACL); /* to be sure */
+    return 0;
+};
+#endif
+
+#endif  /* __KERNEL__ */
diff --git a/include/linux/resource.h b/include/linux/resource.h
new file mode 100644
index 000000000000..21a86cb6acdb
--- /dev/null
+++ b/include/linux/resource.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_RESOURCE_H
+#define _LINUX_RESOURCE_H
+
+#include <linux/time.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ * 
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose.  This reduces the chances of that happening.
+ */
+#define	RUSAGE_SELF	0
+#define	RUSAGE_CHILDREN	(-1)
+#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
+
+struct	rusage {
+	struct timeval ru_utime;	/* user time used */
+	struct timeval ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+struct rlimit {
+	unsigned long	rlim_cur;
+	unsigned long	rlim_max;
+};
+
+#define	PRIO_MIN	(-20)
+#define	PRIO_MAX	20
+
+#define	PRIO_PROCESS	0
+#define	PRIO_PGRP	1
+#define	PRIO_USER	2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed..  8MB seems reasonable.
+ */
+#define _STK_LIM	(8*1024*1024)
+
+/*
+ * GPG wants 32kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT	(8 * PAGE_SIZE)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+#endif
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
new file mode 100644
index 000000000000..11b484e37ac9
--- /dev/null
+++ b/include/linux/rmap.h
@@ -0,0 +1,118 @@
+#ifndef _LINUX_RMAP_H
+#define _LINUX_RMAP_H
+/*
+ * Declarations for Reverse Mapping functions in mm/rmap.c
+ */
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+
+/*
+ * The anon_vma heads a list of private "related" vmas, to scan if
+ * an anonymous page pointing to this anon_vma needs to be unmapped:
+ * the vmas on the list will be related by forking, or by splitting.
+ *
+ * Since vmas come and go as they are split and merged (particularly
+ * in mprotect), the mapping field of an anonymous page cannot point
+ * directly to a vma: instead it points to an anon_vma, on whose list
+ * the related vmas can be easily linked or unlinked.
+ *
+ * After unlinking the last vma on the list, we must garbage collect
+ * the anon_vma object itself: we're guaranteed no page can be
+ * pointing to this anon_vma once its vma list is empty.
+ */
+struct anon_vma {
+	spinlock_t lock;	/* Serialize access to vma list */
+	struct list_head head;	/* List of private "related" vmas */
+};
+
+#ifdef CONFIG_MMU
+
+extern kmem_cache_t *anon_vma_cachep;
+
+static inline struct anon_vma *anon_vma_alloc(void)
+{
+	return kmem_cache_alloc(anon_vma_cachep, SLAB_KERNEL);
+}
+
+static inline void anon_vma_free(struct anon_vma *anon_vma)
+{
+	kmem_cache_free(anon_vma_cachep, anon_vma);
+}
+
+static inline void anon_vma_lock(struct vm_area_struct *vma)
+{
+	struct anon_vma *anon_vma = vma->anon_vma;
+	if (anon_vma)
+		spin_lock(&anon_vma->lock);
+}
+
+static inline void anon_vma_unlock(struct vm_area_struct *vma)
+{
+	struct anon_vma *anon_vma = vma->anon_vma;
+	if (anon_vma)
+		spin_unlock(&anon_vma->lock);
+}
+
+/*
+ * anon_vma helper functions.
+ */
+void anon_vma_init(void);	/* create anon_vma_cachep */
+int  anon_vma_prepare(struct vm_area_struct *);
+void __anon_vma_merge(struct vm_area_struct *, struct vm_area_struct *);
+void anon_vma_unlink(struct vm_area_struct *);
+void anon_vma_link(struct vm_area_struct *);
+void __anon_vma_link(struct vm_area_struct *);
+
+/*
+ * rmap interfaces called when adding or removing pte of page
+ */
+void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
+void page_add_file_rmap(struct page *);
+void page_remove_rmap(struct page *);
+
+/**
+ * page_dup_rmap - duplicate pte mapping to a page
+ * @page:	the page to add the mapping to
+ *
+ * For copy_page_range only: minimal extract from page_add_rmap,
+ * avoiding unnecessary tests (already checked) so it's quicker.
+ */
+static inline void page_dup_rmap(struct page *page)
+{
+	atomic_inc(&page->_mapcount);
+}
+
+/*
+ * Called from mm/vmscan.c to handle paging out
+ */
+int page_referenced(struct page *, int is_locked, int ignore_token);
+int try_to_unmap(struct page *);
+
+/*
+ * Used by swapoff to help locate where page is expected in vma.
+ */
+unsigned long page_address_in_vma(struct page *, struct vm_area_struct *);
+
+#else	/* !CONFIG_MMU */
+
+#define anon_vma_init()		do {} while (0)
+#define anon_vma_prepare(vma)	(0)
+#define anon_vma_link(vma)	do {} while (0)
+
+#define page_referenced(page,l,i) TestClearPageReferenced(page)
+#define try_to_unmap(page)	SWAP_FAIL
+
+#endif	/* CONFIG_MMU */
+
+/*
+ * Return values of try_to_unmap
+ */
+#define SWAP_SUCCESS	0
+#define SWAP_AGAIN	1
+#define SWAP_FAIL	2
+
+#endif	/* _LINUX_RMAP_H */
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
new file mode 100644
index 000000000000..e20bbf9eb365
--- /dev/null
+++ b/include/linux/romfs_fs.h
@@ -0,0 +1,61 @@
+#ifndef __LINUX_ROMFS_FS_H
+#define __LINUX_ROMFS_FS_H
+
+/* The basic structures of the romfs filesystem */
+
+#define ROMBSIZE BLOCK_SIZE
+#define ROMBSBITS BLOCK_SIZE_BITS
+#define ROMBMASK (ROMBSIZE-1)
+#define ROMFS_MAGIC 0x7275
+
+#define ROMFS_MAXFN 128
+
+#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
+#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
+#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
+#define ROMSB_WORD0 __mk4('-','r','o','m')
+#define ROMSB_WORD1 __mk4('1','f','s','-')
+
+/* On-disk "super block" */
+
+struct romfs_super_block {
+	__be32 word0;
+	__be32 word1;
+	__be32 size;
+	__be32 checksum;
+	char name[0];		/* volume name */
+};
+
+/* On disk inode */
+
+struct romfs_inode {
+	__be32 next;		/* low 4 bits see ROMFH_ */
+	__be32 spec;
+	__be32 size;
+	__be32 checksum;
+	char name[0];
+};
+
+#define ROMFH_TYPE 7
+#define ROMFH_HRD 0
+#define ROMFH_DIR 1
+#define ROMFH_REG 2
+#define ROMFH_SYM 3
+#define ROMFH_BLK 4
+#define ROMFH_CHR 5
+#define ROMFH_SCK 6
+#define ROMFH_FIF 7
+#define ROMFH_EXEC 8
+
+/* Alignment */
+
+#define ROMFH_SIZE 16
+#define ROMFH_PAD (ROMFH_SIZE-1)
+#define ROMFH_MASK (~ROMFH_PAD)
+
+#ifdef __KERNEL__
+
+/* Not much now */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/root_dev.h b/include/linux/root_dev.h
new file mode 100644
index 000000000000..ea4bc9d13735
--- /dev/null
+++ b/include/linux/root_dev.h
@@ -0,0 +1,21 @@
+#ifndef _ROOT_DEV_H_
+#define _ROOT_DEV_H_
+
+#include <linux/major.h>
+
+enum {
+	Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
+	Root_RAM0 = MKDEV(RAMDISK_MAJOR, 0),
+	Root_RAM1 = MKDEV(RAMDISK_MAJOR, 1),
+	Root_FD0 = MKDEV(FLOPPY_MAJOR, 0),
+	Root_HDA1 = MKDEV(IDE0_MAJOR, 1),
+	Root_HDA2 = MKDEV(IDE0_MAJOR, 2),
+	Root_SDA1 = MKDEV(SCSI_DISK0_MAJOR, 1),
+	Root_SDA2 = MKDEV(SCSI_DISK0_MAJOR, 2),
+	Root_HDC1 = MKDEV(IDE1_MAJOR, 1),
+	Root_SR0 = MKDEV(SCSI_CDROM_MAJOR, 0),
+};
+
+extern dev_t ROOT_DEV;
+
+#endif
diff --git a/include/linux/rose.h b/include/linux/rose.h
new file mode 100644
index 000000000000..c7b4b184c82e
--- /dev/null
+++ b/include/linux/rose.h
@@ -0,0 +1,87 @@
+/*
+ * These are the public elements of the Linux kernel Rose implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	ROSE_KERNEL_H
+#define	ROSE_KERNEL_H
+
+#define ROSE_MTU	251
+
+#define ROSE_MAX_DIGIS 6
+
+#define	ROSE_DEFER	1
+#define ROSE_T1		2
+#define	ROSE_T2		3
+#define	ROSE_T3		4
+#define	ROSE_IDLE	5
+#define	ROSE_QBITINCL	6
+#define	ROSE_HOLDBACK	7
+
+#define	SIOCRSGCAUSE		(SIOCPROTOPRIVATE+0)
+#define	SIOCRSSCAUSE		(SIOCPROTOPRIVATE+1)
+#define	SIOCRSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSACCEPT		(SIOCPROTOPRIVATE+3)
+#define	SIOCRSCLRRT		(SIOCPROTOPRIVATE+4)
+#define	SIOCRSGL2CALL		(SIOCPROTOPRIVATE+5)
+#define	SIOCRSGFACILITIES	(SIOCPROTOPRIVATE+6)
+
+#define	ROSE_DTE_ORIGINATED	0x00
+#define	ROSE_NUMBER_BUSY	0x01
+#define	ROSE_INVALID_FACILITY	0x03
+#define	ROSE_NETWORK_CONGESTION	0x05
+#define	ROSE_OUT_OF_ORDER	0x09
+#define	ROSE_ACCESS_BARRED	0x0B
+#define	ROSE_NOT_OBTAINABLE	0x0D
+#define	ROSE_REMOTE_PROCEDURE	0x11
+#define	ROSE_LOCAL_PROCEDURE	0x13
+#define	ROSE_SHIP_ABSENT	0x39
+
+typedef struct {
+	char		rose_addr[5];
+} rose_address;
+
+struct sockaddr_rose {
+	sa_family_t	srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	int		srose_ndigis;
+	ax25_address	srose_digi;
+};
+
+struct full_sockaddr_rose {
+	sa_family_t	srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	unsigned int	srose_ndigis;
+	ax25_address	srose_digis[ROSE_MAX_DIGIS];
+};
+
+struct rose_route_struct {
+	rose_address	address;
+	unsigned short	mask;
+	ax25_address	neighbour;
+	char		device[16];
+	unsigned char	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+struct rose_cause_struct {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+struct rose_facilities_struct {
+	rose_address	source_addr,   dest_addr;
+	ax25_address	source_call,   dest_call;
+	unsigned char	source_ndigis, dest_ndigis;
+	ax25_address	source_digis[ROSE_MAX_DIGIS];
+	ax25_address	dest_digis[ROSE_MAX_DIGIS];
+	unsigned int	rand;
+	rose_address	fail_addr;
+	ax25_address	fail_call;
+};
+
+#endif
diff --git a/include/linux/route.h b/include/linux/route.h
new file mode 100644
index 000000000000..f7ed35d5e653
--- /dev/null
+++ b/include/linux/route.h
@@ -0,0 +1,70 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the IP router interface.
+ *
+ * Version:	@(#)route.h	1.0.3	05/27/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		for the purposes of compatibility only.
+ *
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * Changes:
+ *              Mike McLagan    :       Routing by source
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_ROUTE_H
+#define _LINUX_ROUTE_H
+
+#include <linux/if.h>
+#include <linux/compiler.h>
+
+/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
+struct rtentry 
+{
+	unsigned long	rt_pad1;
+	struct sockaddr	rt_dst;		/* target address		*/
+	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
+	struct sockaddr	rt_genmask;	/* target network mask (IP)	*/
+	unsigned short	rt_flags;
+	short		rt_pad2;
+	unsigned long	rt_pad3;
+	void		*rt_pad4;
+	short		rt_metric;	/* +1 for binary compatibility!	*/
+	char __user	*rt_dev;	/* forcing the device at add	*/
+	unsigned long	rt_mtu;		/* per route MTU/Window 	*/
+#ifndef __KERNEL__
+#define rt_mss	rt_mtu			/* Compatibility :-(            */
+#endif
+	unsigned long	rt_window;	/* Window clamping 		*/
+	unsigned short	rt_irtt;	/* Initial RTT			*/
+};
+
+
+#define	RTF_UP		0x0001		/* route usable		  	*/
+#define	RTF_GATEWAY	0x0002		/* destination is a gateway	*/
+#define	RTF_HOST	0x0004		/* host entry (net otherwise)	*/
+#define RTF_REINSTATE	0x0008		/* reinstate route after tmout	*/
+#define	RTF_DYNAMIC	0x0010		/* created dyn. (by redirect)	*/
+#define	RTF_MODIFIED	0x0020		/* modified dyn. (by redirect)	*/
+#define RTF_MTU		0x0040		/* specific MTU for this route	*/
+#define RTF_MSS		RTF_MTU		/* Compatibility :-(		*/
+#define RTF_WINDOW	0x0080		/* per route window clamping	*/
+#define RTF_IRTT	0x0100		/* Initial round trip time	*/
+#define RTF_REJECT	0x0200		/* Reject route			*/
+
+/*
+ *	<linux/ipv6_route.h> uses RTF values >= 64k
+ */
+
+
+
+#endif	/* _LINUX_ROUTE_H */
+
diff --git a/include/linux/rslib.h b/include/linux/rslib.h
new file mode 100644
index 000000000000..980c8f74d8dc
--- /dev/null
+++ b/include/linux/rslib.h
@@ -0,0 +1,105 @@
+/* 
+ * include/linux/rslib.h
+ *
+ * Overview:
+ *   Generic Reed Solomon encoder / decoder library
+ *   
+ * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * RS code lifted from reed solomon library written by Phil Karn
+ * Copyright 2002 Phil Karn, KA9Q
+ *
+ * $Id: rslib.h,v 1.3 2004/10/05 22:08:22 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _RSLIB_H_
+#define _RSLIB_H_
+
+#include <linux/list.h>
+
+/** 
+ * struct rs_control - rs control structure
+ * 
+ * @mm:		Bits per symbol
+ * @nn:		Symbols per block (= (1<<mm)-1)
+ * @alpha_to:	log lookup table
+ * @index_of:	Antilog lookup table
+ * @genpoly:	Generator polynomial 
+ * @nroots:	Number of generator roots = number of parity symbols
+ * @fcr:	First consecutive root, index form
+ * @prim:	Primitive element, index form 
+ * @iprim:	prim-th root of 1, index form 
+ * @gfpoly:	The primitive generator polynominal 
+ * @users:	Users of this structure 
+ * @list:	List entry for the rs control list
+*/
+struct rs_control {
+	int 		mm;
+	int 		nn;
+	uint16_t	*alpha_to;
+	uint16_t	*index_of;
+	uint16_t	*genpoly;
+	int 		nroots;
+	int 		fcr;
+	int 		prim;
+	int 		iprim;
+	int		gfpoly;
+	int		users;
+	struct list_head list;
+};
+
+/* General purpose RS codec, 8-bit data width, symbol width 1-15 bit  */
+#ifdef CONFIG_REED_SOLOMON_ENC8
+int encode_rs8(struct rs_control *rs, uint8_t *data, int len, uint16_t *par,
+	       uint16_t invmsk);
+#endif
+#ifdef CONFIG_REED_SOLOMON_DEC8
+int decode_rs8(struct rs_control *rs, uint8_t *data, uint16_t *par, int len, 
+		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
+	       uint16_t *corr);
+#endif
+
+/* General purpose RS codec, 16-bit data width, symbol width 1-15 bit  */
+#ifdef CONFIG_REED_SOLOMON_ENC16
+int encode_rs16(struct rs_control *rs, uint16_t *data, int len, uint16_t *par,
+		uint16_t invmsk);
+#endif
+#ifdef CONFIG_REED_SOLOMON_DEC16
+int decode_rs16(struct rs_control *rs, uint16_t *data, uint16_t *par, int len,
+		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
+		uint16_t *corr);
+#endif
+
+/* Create or get a matching rs control structure */
+struct rs_control *init_rs(int symsize, int gfpoly, int fcr, int prim, 
+			   int nroots);
+
+/* Release a rs control structure */
+void free_rs(struct rs_control *rs);
+
+/** modulo replacement for galois field arithmetics
+ *
+ *  @rs:	the rs control structure
+ *  @x:		the value to reduce
+ *
+ *  where
+ *  rs->mm = number of bits per symbol	
+ *  rs->nn = (2^rs->mm) - 1
+ *  
+ *  Simple arithmetic modulo would return a wrong result for values
+ *  >= 3 * rs->nn
+*/
+static inline int rs_modnn(struct rs_control *rs, int x)
+{
+	while (x >= rs->nn) {
+		x -= rs->nn;
+		x = (x >> rs->mm) + (x & rs->nn);
+	}
+	return x;
+}
+
+#endif
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
new file mode 100644
index 000000000000..e1aaf1fac8e0
--- /dev/null
+++ b/include/linux/rtc.h
@@ -0,0 +1,108 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also  EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ * 
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _LINUX_RTC_H_
+#define _LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel 
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+	unsigned char enabled;	/* 0 = alarm disable, 1 = alarm disabled */
+	unsigned char pending;  /* 0 = alarm pending, 1 = alarm not pending */
+	struct rtc_time time;	/* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ *   pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ *   pll_value*pll_negmult/pll_clock
+ */ 
+
+struct rtc_pll_info {
+	int pll_ctrl;       /* placeholder for fancier control */
+	int pll_value;      /* get/set correction value */
+	int pll_max;        /* max +ve (faster) adjustment value */
+	int pll_min;        /* max -ve (slower) adjustment value */
+	int pll_posmult;    /* factor for +ve correction */
+	int pll_negmult;    /* factor for -ve correction */
+	long pll_clock;     /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
+#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
+#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
+#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
+#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
+#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
+#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
+#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
+
+#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
+#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
+#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
+#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
+#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
+#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
+#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
+
+#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
+#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
+
+#ifdef __KERNEL__
+
+typedef struct rtc_task {
+	void (*func)(void *private_data);
+	void *private_data;
+} rtc_task_t;
+
+int rtc_register(rtc_task_t *task);
+int rtc_unregister(rtc_task_t *task);
+int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
+void rtc_get_rtc_time(struct rtc_time *rtc_tm);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
new file mode 100644
index 000000000000..32e52769a00b
--- /dev/null
+++ b/include/linux/rtnetlink.h
@@ -0,0 +1,842 @@
+#ifndef __LINUX_RTNETLINK_H
+#define __LINUX_RTNETLINK_H
+
+#include <linux/netlink.h>
+
+/****
+ *		Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+	RTM_BASE	= 16,
+#define RTM_BASE	RTM_BASE
+
+	RTM_NEWLINK	= 16,
+#define RTM_NEWLINK	RTM_NEWLINK
+	RTM_DELLINK,
+#define RTM_DELLINK	RTM_DELLINK
+	RTM_GETLINK,
+#define RTM_GETLINK	RTM_GETLINK
+	RTM_SETLINK,
+#define RTM_SETLINK	RTM_SETLINK
+
+	RTM_NEWADDR	= 20,
+#define RTM_NEWADDR	RTM_NEWADDR
+	RTM_DELADDR,
+#define RTM_DELADDR	RTM_DELADDR
+	RTM_GETADDR,
+#define RTM_GETADDR	RTM_GETADDR
+
+	RTM_NEWROUTE	= 24,
+#define RTM_NEWROUTE	RTM_NEWROUTE
+	RTM_DELROUTE,
+#define RTM_DELROUTE	RTM_DELROUTE
+	RTM_GETROUTE,
+#define RTM_GETROUTE	RTM_GETROUTE
+
+	RTM_NEWNEIGH	= 28,
+#define RTM_NEWNEIGH	RTM_NEWNEIGH
+	RTM_DELNEIGH,
+#define RTM_DELNEIGH	RTM_DELNEIGH
+	RTM_GETNEIGH,
+#define RTM_GETNEIGH	RTM_GETNEIGH
+
+	RTM_NEWRULE	= 32,
+#define RTM_NEWRULE	RTM_NEWRULE
+	RTM_DELRULE,
+#define RTM_DELRULE	RTM_DELRULE
+	RTM_GETRULE,
+#define RTM_GETRULE	RTM_GETRULE
+
+	RTM_NEWQDISC	= 36,
+#define RTM_NEWQDISC	RTM_NEWQDISC
+	RTM_DELQDISC,
+#define RTM_DELQDISC	RTM_DELQDISC
+	RTM_GETQDISC,
+#define RTM_GETQDISC	RTM_GETQDISC
+
+	RTM_NEWTCLASS	= 40,
+#define RTM_NEWTCLASS	RTM_NEWTCLASS
+	RTM_DELTCLASS,
+#define RTM_DELTCLASS	RTM_DELTCLASS
+	RTM_GETTCLASS,
+#define RTM_GETTCLASS	RTM_GETTCLASS
+
+	RTM_NEWTFILTER	= 44,
+#define RTM_NEWTFILTER	RTM_NEWTFILTER
+	RTM_DELTFILTER,
+#define RTM_DELTFILTER	RTM_DELTFILTER
+	RTM_GETTFILTER,
+#define RTM_GETTFILTER	RTM_GETTFILTER
+
+	RTM_NEWACTION	= 48,
+#define RTM_NEWACTION   RTM_NEWACTION
+	RTM_DELACTION,
+#define RTM_DELACTION   RTM_DELACTION
+	RTM_GETACTION,
+#define RTM_GETACTION   RTM_GETACTION
+
+	RTM_NEWPREFIX	= 52,
+#define RTM_NEWPREFIX	RTM_NEWPREFIX
+	RTM_GETPREFIX	= 54,
+#define RTM_GETPREFIX	RTM_GETPREFIX
+
+	RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+	RTM_GETANYCAST	= 62,
+#define RTM_GETANYCAST	RTM_GETANYCAST
+
+	RTM_MAX,
+#define RTM_MAX		RTM_MAX
+};
+
+/* 
+   Generic structure for encapsulation of optional route information.
+   It is reminiscent of sockaddr, but with sa_family replaced
+   with attribute type.
+ */
+
+struct rtattr
+{
+	unsigned short	rta_len;
+	unsigned short	rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO	4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+			 (rta)->rta_len >= sizeof(struct rtattr) && \
+			 (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ *		Definitions used in routing table administration.
+ ****/
+
+struct rtmsg
+{
+	unsigned char		rtm_family;
+	unsigned char		rtm_dst_len;
+	unsigned char		rtm_src_len;
+	unsigned char		rtm_tos;
+
+	unsigned char		rtm_table;	/* Routing table id */
+	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
+	unsigned char		rtm_scope;	/* See below */	
+	unsigned char		rtm_type;	/* See below	*/
+
+	unsigned		rtm_flags;
+};
+
+/* rtm_type */
+
+enum
+{
+	RTN_UNSPEC,
+	RTN_UNICAST,		/* Gateway or direct route	*/
+	RTN_LOCAL,		/* Accept locally		*/
+	RTN_BROADCAST,		/* Accept locally as broadcast,
+				   send as broadcast */
+	RTN_ANYCAST,		/* Accept locally as broadcast,
+				   but send as unicast */
+	RTN_MULTICAST,		/* Multicast route		*/
+	RTN_BLACKHOLE,		/* Drop				*/
+	RTN_UNREACHABLE,	/* Destination is unreachable   */
+	RTN_PROHIBIT,		/* Administratively prohibited	*/
+	RTN_THROW,		/* Not in this table		*/
+	RTN_NAT,		/* Translate this address	*/
+	RTN_XRESOLVE,		/* Use external resolver	*/
+	__RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC	0
+#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
+				   not used by current IPv4 */
+#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
+#define RTPROT_BOOT	3	/* Route installed during boot		*/
+#define RTPROT_STATIC	4	/* Route installed by administrator	*/
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+   they are just passed from user and back as is.
+   It will be used by hypothetical multiple routing daemons.
+   Note that protocol values should be standardized in order to
+   avoid conflicts.
+ */
+
+#define RTPROT_GATED	8	/* Apparently, GateD */
+#define RTPROT_RA	9	/* RDISC/ND router advertisements */
+#define RTPROT_MRT	10	/* Merit MRT */
+#define RTPROT_ZEBRA	11	/* Zebra */
+#define RTPROT_BIRD	12	/* BIRD */
+#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
+#define RTPROT_XORP	14	/* XORP */
+
+/* rtm_scope
+
+   Really it is not scope, but sort of distance to the destination.
+   NOWHERE are reserved for not existing destinations, HOST is our
+   local addresses, LINK are destinations, located on directly attached
+   link and UNIVERSE is everywhere in the Universe.
+
+   Intermediate values are also possible f.e. interior routes
+   could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t
+{
+	RT_SCOPE_UNIVERSE=0,
+/* User defined values  */
+	RT_SCOPE_SITE=200,
+	RT_SCOPE_LINK=253,
+	RT_SCOPE_HOST=254,
+	RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
+#define RTM_F_CLONED		0x200	/* This route is cloned		*/
+#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
+#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+
+/* Reserved table identifiers */
+
+enum rt_class_t
+{
+	RT_TABLE_UNSPEC=0,
+/* User defined values */
+	RT_TABLE_DEFAULT=253,
+	RT_TABLE_MAIN=254,
+	RT_TABLE_LOCAL=255,
+	__RT_TABLE_MAX
+};
+#define RT_TABLE_MAX (__RT_TABLE_MAX - 1)
+
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t
+{
+	RTA_UNSPEC,
+	RTA_DST,
+	RTA_SRC,
+	RTA_IIF,
+	RTA_OIF,
+	RTA_GATEWAY,
+	RTA_PRIORITY,
+	RTA_PREFSRC,
+	RTA_METRICS,
+	RTA_MULTIPATH,
+	RTA_PROTOINFO,
+	RTA_FLOW,
+	RTA_CACHEINFO,
+	RTA_SESSION,
+	RTA_MP_ALGO,
+	__RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop
+{
+	unsigned short		rtnh_len;
+	unsigned char		rtnh_flags;
+	unsigned char		rtnh_hops;
+	int			rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
+#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
+#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO	4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+			   ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo
+{
+	__u32	rta_clntref;
+	__u32	rta_lastuse;
+	__s32	rta_expires;
+	__u32	rta_error;
+	__u32	rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+	__u32	rta_id;
+	__u32	rta_ts;
+	__u32	rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum
+{
+	RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+	RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+	RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+	RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+	RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+	RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+	RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+	RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+	RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+	RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+	RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+	RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+	RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+	__RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN	0x00000001
+#define RTAX_FEATURE_SACK	0x00000002
+#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_ALLFRAG	0x00000008
+
+struct rta_session
+{
+	__u8	proto;
+
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+			__u16	ident;
+		} icmpt;
+
+		__u32		spi;
+	} u;
+};
+
+
+/*********************************************************
+ *		Interface address.
+ ****/
+
+struct ifaddrmsg
+{
+	unsigned char	ifa_family;
+	unsigned char	ifa_prefixlen;	/* The prefix length		*/
+	unsigned char	ifa_flags;	/* Flags			*/
+	unsigned char	ifa_scope;	/* See above			*/
+	int		ifa_index;	/* Link index			*/
+};
+
+enum
+{
+	IFA_UNSPEC,
+	IFA_ADDRESS,
+	IFA_LOCAL,
+	IFA_LABEL,
+	IFA_BROADCAST,
+	IFA_ANYCAST,
+	IFA_CACHEINFO,
+	IFA_MULTICAST,
+	__IFA_MAX
+};
+
+#define IFA_MAX (__IFA_MAX - 1)
+
+/* ifa_flags */
+
+#define IFA_F_SECONDARY		0x01
+#define IFA_F_TEMPORARY		IFA_F_SECONDARY
+
+#define IFA_F_DEPRECATED	0x20
+#define IFA_F_TENTATIVE		0x40
+#define IFA_F_PERMANENT		0x80
+
+struct ifa_cacheinfo
+{
+	__u32	ifa_prefered;
+	__u32	ifa_valid;
+	__u32	cstamp; /* created timestamp, hundredths of seconds */
+	__u32	tstamp; /* updated timestamp, hundredths of seconds */
+};
+
+
+#define IFA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
+#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
+
+/*
+   Important comment:
+   IFA_ADDRESS is prefix address, rather than local interface address.
+   It makes no difference for normally configured broadcast interfaces,
+   but for point-to-point IFA_ADDRESS is DESTINATION address,
+   local address is supplied in IFA_LOCAL attribute.
+ */
+
+/**************************************************************
+ *		Neighbour discovery.
+ ****/
+
+struct ndmsg
+{
+	unsigned char	ndm_family;
+	unsigned char	ndm_pad1;
+	unsigned short	ndm_pad2;
+	int		ndm_ifindex;	/* Link index			*/
+	__u16		ndm_state;
+	__u8		ndm_flags;
+	__u8		ndm_type;
+};
+
+enum
+{
+	NDA_UNSPEC,
+	NDA_DST,
+	NDA_LLADDR,
+	NDA_CACHEINFO,
+	NDA_PROBES,
+	__NDA_MAX
+};
+
+#define NDA_MAX (__NDA_MAX - 1)
+
+#define NDA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ndmsg))))
+#define NDA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ndmsg))
+
+/*
+ *	Neighbor Cache Entry Flags
+ */
+
+#define NTF_PROXY	0x08	/* == ATF_PUBL */
+#define NTF_ROUTER	0x80
+
+/*
+ *	Neighbor Cache Entry States.
+ */
+
+#define NUD_INCOMPLETE	0x01
+#define NUD_REACHABLE	0x02
+#define NUD_STALE	0x04
+#define NUD_DELAY	0x08
+#define NUD_PROBE	0x10
+#define NUD_FAILED	0x20
+
+/* Dummy states */
+#define NUD_NOARP	0x40
+#define NUD_PERMANENT	0x80
+#define NUD_NONE	0x00
+
+
+struct nda_cacheinfo
+{
+	__u32		ndm_confirmed;
+	__u32		ndm_used;
+	__u32		ndm_updated;
+	__u32		ndm_refcnt;
+};
+
+/****
+ *		General form of address family dependent message.
+ ****/
+
+struct rtgenmsg
+{
+	unsigned char		rtgen_family;
+};
+
+/*****************************************************************
+ *		Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg
+{
+	unsigned char	ifi_family;
+	unsigned char	__ifi_pad;
+	unsigned short	ifi_type;		/* ARPHRD_* */
+	int		ifi_index;		/* Link index	*/
+	unsigned	ifi_flags;		/* IFF_* flags	*/
+	unsigned	ifi_change;		/* IFF_* change mask */
+};
+
+/********************************************************************
+ *		prefix information 
+ ****/
+
+struct prefixmsg
+{
+	unsigned char	prefix_family;
+	int		prefix_ifindex;
+	unsigned char	prefix_type;
+	unsigned char	prefix_len;
+	unsigned char	prefix_flags;
+};
+
+enum 
+{
+	PREFIX_UNSPEC,
+	PREFIX_ADDRESS,
+	PREFIX_CACHEINFO,
+	__PREFIX_MAX
+};
+
+#define PREFIX_MAX	(__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo
+{
+	__u32	preferred_time;
+	__u32	valid_time;
+};
+
+/* The struct should be in sync with struct net_device_stats */
+struct rtnl_link_stats
+{
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+	
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap
+{
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+enum
+{
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum
+{
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo
+{
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+/*****************************************************************
+ *		Traffic control messages.
+ ****/
+
+struct tcmsg
+{
+	unsigned char	tcm_family;
+	unsigned char	tcm__pad1;
+	unsigned short	tcm__pad2;
+	int		tcm_ifindex;
+	__u32		tcm_handle;
+	__u32		tcm_parent;
+	__u32		tcm_info;
+};
+
+enum
+{
+	TCA_UNSPEC,
+	TCA_KIND,
+	TCA_OPTIONS,
+	TCA_STATS,
+	TCA_XSTATS,
+	TCA_RATE,
+	TCA_FCNT,
+	TCA_STATS2,
+	__TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+
+/* RTnetlink multicast groups */
+
+#define RTMGRP_LINK		1
+#define RTMGRP_NOTIFY		2
+#define RTMGRP_NEIGH		4
+#define RTMGRP_TC		8
+
+#define RTMGRP_IPV4_IFADDR	0x10
+#define RTMGRP_IPV4_MROUTE	0x20
+#define RTMGRP_IPV4_ROUTE	0x40
+
+#define RTMGRP_IPV6_IFADDR	0x100
+#define RTMGRP_IPV6_MROUTE	0x200
+#define RTMGRP_IPV6_ROUTE	0x400
+#define RTMGRP_IPV6_IFINFO	0x800
+
+#define RTMGRP_DECnet_IFADDR    0x1000
+#define RTMGRP_DECnet_ROUTE     0x4000
+
+#define RTMGRP_IPV6_PREFIX	0x20000
+
+/* TC action piece */
+struct tcamsg
+{
+	unsigned char	tca_family;
+	unsigned char	tca__pad1;
+	unsigned short	tca__pad2;
+};
+#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
+#define TCAA_MAX 1
+
+/* End of information exported to user level */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+extern size_t rtattr_strlcpy(char *dest, const struct rtattr *rta, size_t size);
+static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
+{
+	int len = strlen(str) + 1;
+	return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len);
+}
+
+extern int rtattr_parse(struct rtattr *tb[], int maxattr, struct rtattr *rta, int len);
+
+#define rtattr_parse_nested(tb, max, rta) \
+	rtattr_parse((tb), (max), RTA_DATA((rta)), RTA_PAYLOAD((rta)))
+
+extern struct sock *rtnl;
+
+struct rtnetlink_link
+{
+	int (*doit)(struct sk_buff *, struct nlmsghdr*, void *attr);
+	int (*dumpit)(struct sk_buff *, struct netlink_callback *cb);
+};
+
+extern struct rtnetlink_link * rtnetlink_links[NPROTO];
+extern int rtnetlink_send(struct sk_buff *skb, u32 pid, u32 group, int echo);
+extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics);
+
+extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data);
+
+#define RTA_PUT(skb, attrtype, attrlen, data) \
+({	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
+		 goto rtattr_failure; \
+   	__rta_fill(skb, attrtype, attrlen, data); }) 
+
+#define RTA_PUT_NOHDR(skb, attrlen, data) \
+({	if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \
+		goto rtattr_failure; \
+	memcpy(skb_put(skb, RTA_ALIGN(attrlen)), data, attrlen); })
+		
+static inline struct rtattr *
+__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+	struct rtattr *rta;
+	int size = RTA_LENGTH(attrlen);
+
+	rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size));
+	rta->rta_type = attrtype;
+	rta->rta_len = size;
+	return rta;
+}
+
+#define __RTA_PUT(skb, attrtype, attrlen) \
+({ 	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
+		goto rtattr_failure; \
+   	__rta_reserve(skb, attrtype, attrlen); })
+
+extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change);
+
+extern struct semaphore rtnl_sem;
+
+#define rtnl_shlock()		down(&rtnl_sem)
+#define rtnl_shlock_nowait()	down_trylock(&rtnl_sem)
+
+#define rtnl_shunlock()	do { up(&rtnl_sem); \
+		             if (rtnl && rtnl->sk_receive_queue.qlen) \
+				     rtnl->sk_data_ready(rtnl, 0); \
+		        } while(0)
+
+extern void rtnl_lock(void);
+extern int rtnl_lock_interruptible(void);
+extern void rtnl_unlock(void);
+extern void rtnetlink_init(void);
+
+#define ASSERT_RTNL() do { \
+	if (unlikely(down_trylock(&rtnl_sem) == 0)) { \
+		up(&rtnl_sem); \
+		printk(KERN_ERR "RTNL: assertion failed at %s (%d)\n", \
+		       __FILE__,  __LINE__); \
+		dump_stack(); \
+	} \
+} while(0)
+
+#define BUG_TRAP(x) do { \
+	if (unlikely(!(x))) { \
+		printk(KERN_ERR "KERNEL: assertion (%s) failed at %s (%d)\n", \
+			#x,  __FILE__ , __LINE__); \
+	} \
+} while(0)
+
+#endif /* __KERNEL__ */
+
+
+#endif	/* __LINUX_RTNETLINK_H */
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
new file mode 100644
index 000000000000..b52a2af25f1f
--- /dev/null
+++ b/include/linux/rwsem-spinlock.h
@@ -0,0 +1,65 @@
+/* rwsem-spinlock.h: fallback C implementation
+ *
+ * Copyright (c) 2001   David Howells (dhowells@redhat.com).
+ * - Derived partially from ideas by Andrea Arcangeli <andrea@suse.de>
+ * - Derived also from comments by Linus
+ */
+
+#ifndef _LINUX_RWSEM_SPINLOCK_H
+#define _LINUX_RWSEM_SPINLOCK_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include linux/rwsem-spinlock.h directly, use linux/rwsem.h instead"
+#endif
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+struct rwsem_waiter;
+
+/*
+ * the rw-semaphore definition
+ * - if activity is 0 then there are no active readers or writers
+ * - if activity is +ve then that is the number of active readers
+ * - if activity is -1 then there is one active writer
+ * - if wait_list is not empty, then there are processes waiting for the semaphore
+ */
+struct rw_semaphore {
+	__s32			activity;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ 0, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void FASTCALL(init_rwsem(struct rw_semaphore *sem));
+extern void FASTCALL(__down_read(struct rw_semaphore *sem));
+extern int FASTCALL(__down_read_trylock(struct rw_semaphore *sem));
+extern void FASTCALL(__down_write(struct rw_semaphore *sem));
+extern int FASTCALL(__down_write_trylock(struct rw_semaphore *sem));
+extern void FASTCALL(__up_read(struct rw_semaphore *sem));
+extern void FASTCALL(__up_write(struct rw_semaphore *sem));
+extern void FASTCALL(__downgrade_write(struct rw_semaphore *sem));
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_RWSEM_SPINLOCK_H */
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
new file mode 100644
index 000000000000..bfb988885002
--- /dev/null
+++ b/include/linux/rwsem.h
@@ -0,0 +1,115 @@
+/* rwsem.h: R/W semaphores, public interface
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ * Derived from asm-i386/semaphore.h
+ */
+
+#ifndef _LINUX_RWSEM_H
+#define _LINUX_RWSEM_H
+
+#include <linux/linkage.h>
+
+#define RWSEM_DEBUG 0
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct rw_semaphore;
+
+#ifdef CONFIG_RWSEM_GENERIC_SPINLOCK
+#include <linux/rwsem-spinlock.h> /* use a generic implementation */
+#else
+#include <asm/rwsem.h> /* use an arch-specific implementation */
+#endif
+
+#ifndef rwsemtrace
+#if RWSEM_DEBUG
+extern void FASTCALL(rwsemtrace(struct rw_semaphore *sem, const char *str));
+#else
+#define rwsemtrace(SEM,FMT)
+#endif
+#endif
+
+/*
+ * lock for reading
+ */
+static inline void down_read(struct rw_semaphore *sem)
+{
+	might_sleep();
+	rwsemtrace(sem,"Entering down_read");
+	__down_read(sem);
+	rwsemtrace(sem,"Leaving down_read");
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int down_read_trylock(struct rw_semaphore *sem)
+{
+	int ret;
+	rwsemtrace(sem,"Entering down_read_trylock");
+	ret = __down_read_trylock(sem);
+	rwsemtrace(sem,"Leaving down_read_trylock");
+	return ret;
+}
+
+/*
+ * lock for writing
+ */
+static inline void down_write(struct rw_semaphore *sem)
+{
+	might_sleep();
+	rwsemtrace(sem,"Entering down_write");
+	__down_write(sem);
+	rwsemtrace(sem,"Leaving down_write");
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int down_write_trylock(struct rw_semaphore *sem)
+{
+	int ret;
+	rwsemtrace(sem,"Entering down_write_trylock");
+	ret = __down_write_trylock(sem);
+	rwsemtrace(sem,"Leaving down_write_trylock");
+	return ret;
+}
+
+/*
+ * release a read lock
+ */
+static inline void up_read(struct rw_semaphore *sem)
+{
+	rwsemtrace(sem,"Entering up_read");
+	__up_read(sem);
+	rwsemtrace(sem,"Leaving up_read");
+}
+
+/*
+ * release a write lock
+ */
+static inline void up_write(struct rw_semaphore *sem)
+{
+	rwsemtrace(sem,"Entering up_write");
+	__up_write(sem);
+	rwsemtrace(sem,"Leaving up_write");
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void downgrade_write(struct rw_semaphore *sem)
+{
+	rwsemtrace(sem,"Entering downgrade_write");
+	__downgrade_write(sem);
+	rwsemtrace(sem,"Leaving downgrade_write");
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_RWSEM_H */
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
new file mode 100644
index 000000000000..7ca35abad387
--- /dev/null
+++ b/include/linux/sc26198.h
@@ -0,0 +1,533 @@
+/*****************************************************************************/
+
+/*
+ *	sc26198.h  -- SC26198 UART hardware info.
+ *
+ *	Copyright (C) 1995-1998  Stallion Technologies
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_SC26198_H
+#define	_SC26198_H
+/*****************************************************************************/
+
+/*
+ *	Define the number of async ports per sc26198 uart device.
+ */
+#define	SC26198_PORTS		8
+
+/*
+ *	Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
+ */
+#define	SC26198_MASTERCLOCK	14745600L
+#define	SC26198_DCLK		(SC26198_MASTERCLOCK)
+#define	SC26198_CCLK		(SC26198_MASTERCLOCK / 2)
+#define	SC26198_BCLK		(SC26198_MASTERCLOCK / 4)
+
+/*
+ *	Define internal FIFO sizes for the 26198 ports.
+ */
+#define	SC26198_TXFIFOSIZE	16
+#define	SC26198_RXFIFOSIZE	16
+
+/*****************************************************************************/
+
+/*
+ *	Global register definitions. These registers are global to each 26198
+ *	device, not specific ports on it.
+ */
+#define	TSTR		0x0d
+#define	GCCR		0x0f
+#define	ICR		0x1b
+#define	WDTRCR		0x1d
+#define	IVR		0x1f
+#define	BRGTRUA		0x84
+#define	GPOSR		0x87
+#define	GPOC		0x8b
+#define	UCIR		0x8c
+#define	CIR		0x8c
+#define	BRGTRUB		0x8d
+#define	GRXFIFO		0x8e
+#define	GTXFIFO		0x8e
+#define	GCCR2		0x8f
+#define	BRGTRLA		0x94
+#define	GPOR		0x97
+#define	GPOD		0x9b
+#define	BRGTCR		0x9c
+#define	GICR		0x9c
+#define	BRGTRLB		0x9d
+#define	GIBCR		0x9d
+#define	GITR		0x9f
+
+/*
+ *	Per port channel registers. These are the register offsets within
+ *	the port address space, so need to have the port address (0 to 7)
+ *	inserted in bit positions 4:6.
+ */
+#define	MR0		0x00
+#define	MR1		0x01
+#define	IOPCR		0x02
+#define	BCRBRK		0x03
+#define	BCRCOS		0x04
+#define	BCRX		0x06
+#define	BCRA		0x07
+#define	XONCR		0x08
+#define	XOFFCR		0x09
+#define	ARCR		0x0a
+#define	RXCSR		0x0c
+#define	TXCSR		0x0e
+#define	MR2		0x80
+#define	SR		0x81
+#define SCCR		0x81
+#define	ISR		0x82
+#define	IMR		0x82
+#define	TXFIFO		0x83
+#define	RXFIFO		0x83
+#define	IPR		0x84
+#define	IOPIOR		0x85
+#define	XISR		0x86
+
+/*
+ *	For any given port calculate the address to use to access a specified
+ *	register. This is only used for unusual access, mostly this is done
+ *	through the assembler access routines.
+ */
+#define	SC26198_PORTREG(port,reg)	((((port) & 0x07) << 4) | (reg))
+
+/*****************************************************************************/
+
+/*
+ *	Global configuration control register bit definitions.
+ */
+#define	GCCR_NOACK		0x00
+#define	GCCR_IVRACK		0x02
+#define	GCCR_IVRCHANACK		0x04
+#define	GCCR_IVRTYPCHANACK	0x06
+#define	GCCR_ASYNCCYCLE		0x00
+#define	GCCR_SYNCCYCLE		0x40
+
+/*****************************************************************************/
+
+/*
+ *	Mode register 0 bit definitions.
+ */
+#define	MR0_ADDRNONE		0x00
+#define	MR0_AUTOWAKE		0x01
+#define	MR0_AUTODOZE		0x02
+#define	MR0_AUTOWAKEDOZE	0x03
+#define	MR0_SWFNONE		0x00
+#define	MR0_SWFTX		0x04
+#define	MR0_SWFRX		0x08
+#define	MR0_SWFRXTX		0x0c
+#define	MR0_TXMASK		0x30
+#define	MR0_TXEMPTY		0x00
+#define	MR0_TXHIGH		0x10
+#define	MR0_TXHALF		0x20
+#define	MR0_TXRDY		0x00
+#define	MR0_ADDRNT		0x00
+#define	MR0_ADDRT		0x40
+#define	MR0_SWFNT		0x00
+#define	MR0_SWFT		0x80
+
+/*
+ *	Mode register 1 bit definitions.
+ */
+#define	MR1_CS5			0x00
+#define	MR1_CS6			0x01
+#define	MR1_CS7			0x02
+#define	MR1_CS8			0x03
+#define	MR1_PAREVEN		0x00
+#define	MR1_PARODD		0x04
+#define	MR1_PARENB		0x00
+#define	MR1_PARFORCE		0x08
+#define	MR1_PARNONE		0x10
+#define	MR1_PARSPECIAL		0x18
+#define	MR1_ERRCHAR		0x00
+#define	MR1_ERRBLOCK		0x20
+#define	MR1_ISRUNMASKED		0x00
+#define	MR1_ISRMASKED		0x40
+#define	MR1_AUTORTS		0x80
+
+/*
+ *	Mode register 2 bit definitions.
+ */
+#define	MR2_STOP1		0x00
+#define	MR2_STOP15		0x01
+#define	MR2_STOP2		0x02
+#define	MR2_STOP916		0x03
+#define	MR2_RXFIFORDY		0x00
+#define	MR2_RXFIFOHALF		0x04
+#define	MR2_RXFIFOHIGH		0x08
+#define	MR2_RXFIFOFULL		0x0c
+#define	MR2_AUTOCTS		0x10
+#define	MR2_TXRTS		0x20
+#define	MR2_MODENORM		0x00
+#define	MR2_MODEAUTOECHO	0x40
+#define	MR2_MODELOOP		0x80
+#define	MR2_MODEREMECHO		0xc0
+
+/*****************************************************************************/
+
+/*
+ *	Baud Rate Generator (BRG) selector values.
+ */
+#define	BRG_50			0x00
+#define	BRG_75			0x01
+#define	BRG_150			0x02
+#define	BRG_200			0x03
+#define	BRG_300			0x04
+#define	BRG_450			0x05
+#define	BRG_600			0x06
+#define	BRG_900			0x07
+#define	BRG_1200		0x08
+#define	BRG_1800		0x09
+#define	BRG_2400		0x0a
+#define	BRG_3600		0x0b
+#define	BRG_4800		0x0c
+#define	BRG_7200		0x0d
+#define	BRG_9600		0x0e
+#define	BRG_14400		0x0f
+#define	BRG_19200		0x10
+#define	BRG_28200		0x11
+#define	BRG_38400		0x12
+#define	BRG_57600		0x13
+#define	BRG_115200		0x14
+#define	BRG_230400		0x15
+#define	BRG_GIN0		0x16
+#define	BRG_GIN1		0x17
+#define	BRG_CT0			0x18
+#define	BRG_CT1			0x19
+#define	BRG_RX2TX316		0x1b
+#define	BRG_RX2TX31		0x1c
+
+#define	SC26198_MAXBAUD		921600
+
+/*****************************************************************************/
+
+/*
+ *	Command register command definitions.
+ */
+#define	CR_NULL			0x04
+#define	CR_ADDRNORMAL		0x0c
+#define	CR_RXRESET		0x14
+#define	CR_TXRESET		0x1c
+#define	CR_CLEARRXERR		0x24
+#define	CR_BREAKRESET		0x2c
+#define	CR_TXSTARTBREAK		0x34
+#define	CR_TXSTOPBREAK		0x3c
+#define	CR_RTSON		0x44
+#define	CR_RTSOFF		0x4c
+#define	CR_ADDRINIT		0x5c
+#define	CR_RXERRBLOCK		0x6c
+#define	CR_TXSENDXON		0x84
+#define	CR_TXSENDXOFF		0x8c
+#define	CR_GANGXONSET		0x94
+#define	CR_GANGXOFFSET		0x9c
+#define	CR_GANGXONINIT		0xa4
+#define	CR_GANGXOFFINIT		0xac
+#define	CR_HOSTXON		0xb4
+#define	CR_HOSTXOFF		0xbc
+#define	CR_CANCELXOFF		0xc4
+#define	CR_ADDRRESET		0xdc
+#define	CR_RESETALLPORTS	0xf4
+#define	CR_RESETALL		0xfc
+
+#define	CR_RXENABLE		0x01
+#define	CR_TXENABLE		0x02
+
+/*****************************************************************************/
+
+/*
+ *	Channel status register.
+ */
+#define	SR_RXRDY		0x01
+#define	SR_RXFULL		0x02
+#define	SR_TXRDY		0x04
+#define	SR_TXEMPTY		0x08
+#define	SR_RXOVERRUN		0x10
+#define	SR_RXPARITY		0x20
+#define	SR_RXFRAMING		0x40
+#define	SR_RXBREAK		0x80
+
+#define	SR_RXERRS		(SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
+
+/*****************************************************************************/
+
+/*
+ *	Interrupt status register and interrupt mask register bit definitions.
+ */
+#define	IR_TXRDY		0x01
+#define	IR_RXRDY		0x02
+#define	IR_RXBREAK		0x04
+#define	IR_XONXOFF		0x10
+#define	IR_ADDRRECOG		0x20
+#define	IR_RXWATCHDOG		0x40
+#define	IR_IOPORT		0x80
+
+/*****************************************************************************/
+
+/*
+ *	Interrupt vector register field definitions.
+ */
+#define	IVR_CHANMASK		0x07
+#define	IVR_TYPEMASK		0x18
+#define	IVR_CONSTMASK		0xc0
+
+#define	IVR_RXDATA		0x10
+#define	IVR_RXBADDATA		0x18
+#define	IVR_TXDATA		0x08
+#define	IVR_OTHER		0x00
+
+/*****************************************************************************/
+
+/*
+ *	BRG timer control register bit definitions.
+ */
+#define	BRGCTCR_DISABCLK0	0x00
+#define	BRGCTCR_ENABCLK0	0x08
+#define	BRGCTCR_DISABCLK1	0x00
+#define	BRGCTCR_ENABCLK1	0x80
+
+#define	BRGCTCR_0SCLK16		0x00
+#define	BRGCTCR_0SCLK32		0x01
+#define	BRGCTCR_0SCLK64		0x02
+#define	BRGCTCR_0SCLK128	0x03
+#define	BRGCTCR_0X1		0x04
+#define	BRGCTCR_0X12		0x05
+#define	BRGCTCR_0IO1A		0x06
+#define	BRGCTCR_0GIN0		0x07
+
+#define	BRGCTCR_1SCLK16		0x00
+#define	BRGCTCR_1SCLK32		0x10
+#define	BRGCTCR_1SCLK64		0x20
+#define	BRGCTCR_1SCLK128	0x30
+#define	BRGCTCR_1X1		0x40
+#define	BRGCTCR_1X12		0x50
+#define	BRGCTCR_1IO1B		0x60
+#define	BRGCTCR_1GIN1		0x70
+
+/*****************************************************************************/
+
+/*
+ *	Watch dog timer enable register.
+ */
+#define	WDTRCR_ENABALL		0xff
+
+/*****************************************************************************/
+
+/*
+ *	XON/XOFF interrupt status register.
+ */
+#define	XISR_TXCHARMASK		0x03
+#define	XISR_TXCHARNORMAL	0x00
+#define	XISR_TXWAIT		0x01
+#define	XISR_TXXOFFPEND		0x02
+#define	XISR_TXXONPEND		0x03
+
+#define	XISR_TXFLOWMASK		0x0c
+#define	XISR_TXNORMAL		0x00
+#define	XISR_TXSTOPPEND		0x04
+#define	XISR_TXSTARTED		0x08
+#define	XISR_TXSTOPPED		0x0c
+
+#define	XISR_RXFLOWMASK		0x30
+#define	XISR_RXFLOWNONE		0x00
+#define	XISR_RXXONSENT		0x10
+#define	XISR_RXXOFFSENT		0x20
+
+#define	XISR_RXXONGOT		0x40
+#define	XISR_RXXOFFGOT		0x80
+
+/*****************************************************************************/
+
+/*
+ *	Current interrupt register.
+ */
+#define	CIR_TYPEMASK		0xc0
+#define	CIR_TYPEOTHER		0x00
+#define	CIR_TYPETX		0x40
+#define	CIR_TYPERXGOOD		0x80
+#define	CIR_TYPERXBAD		0xc0
+
+#define	CIR_RXDATA		0x80
+#define	CIR_RXBADDATA		0x40
+#define	CIR_TXDATA		0x40
+
+#define	CIR_CHANMASK		0x07
+#define	CIR_CNTMASK		0x38
+
+#define	CIR_SUBTYPEMASK		0x38
+#define	CIR_SUBNONE		0x00
+#define	CIR_SUBCOS		0x08
+#define	CIR_SUBADDR		0x10
+#define	CIR_SUBXONXOFF		0x18
+#define	CIR_SUBBREAK		0x28
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting channel register.
+ */
+#define	GICR_CHANMASK		0x07
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting byte count register.
+ */
+#define	GICR_COUNTMASK		0x0f
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting type register.
+ */
+#define	GITR_RXMASK		0xc0
+#define	GITR_RXNONE		0x00
+#define	GITR_RXBADDATA		0x80
+#define	GITR_RXGOODDATA		0xc0
+#define	GITR_TXDATA		0x20
+
+#define	GITR_SUBTYPEMASK	0x07
+#define	GITR_SUBNONE		0x00
+#define	GITR_SUBCOS		0x01
+#define	GITR_SUBADDR		0x02
+#define	GITR_SUBXONXOFF		0x03
+#define	GITR_SUBBREAK		0x05
+
+/*****************************************************************************/
+
+/*
+ *	Input port change register.
+ */
+#define	IPR_CTS			0x01
+#define	IPR_DTR			0x02
+#define	IPR_RTS			0x04
+#define	IPR_DCD			0x08
+#define	IPR_CTSCHANGE		0x10
+#define	IPR_DTRCHANGE		0x20
+#define	IPR_RTSCHANGE		0x40
+#define	IPR_DCDCHANGE		0x80
+
+#define	IPR_CHANGEMASK		0xf0
+
+/*****************************************************************************/
+
+/*
+ *	IO port interrupt and output register.
+ */
+#define	IOPR_CTS		0x01
+#define	IOPR_DTR		0x02
+#define	IOPR_RTS		0x04
+#define	IOPR_DCD		0x08
+#define	IOPR_CTSCOS		0x10
+#define	IOPR_DTRCOS		0x20
+#define	IOPR_RTSCOS		0x40
+#define	IOPR_DCDCOS		0x80
+
+/*****************************************************************************/
+
+/*
+ *	IO port configuration register.
+ */
+#define	IOPCR_SETCTS		0x00
+#define	IOPCR_SETDTR		0x04
+#define	IOPCR_SETRTS		0x10
+#define	IOPCR_SETDCD		0x00
+
+#define	IOPCR_SETSIGS		(IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output select register.
+ */
+#define	GPORS_TXC1XA		0x08
+#define	GPORS_TXC16XA		0x09
+#define	GPORS_RXC16XA		0x0a
+#define	GPORS_TXC16XB		0x0b
+#define	GPORS_GPOR3		0x0c
+#define	GPORS_GPOR2		0x0d
+#define	GPORS_GPOR1		0x0e
+#define	GPORS_GPOR0		0x0f
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output register.
+ */
+#define	GPOR_0			0x01
+#define	GPOR_1			0x02
+#define	GPOR_2			0x04
+#define	GPOR_3			0x08
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output clock register.
+ */
+#define	GPORC_0NONE		0x00
+#define	GPORC_0GIN0		0x01
+#define	GPORC_0GIN1		0x02
+#define	GPORC_0IO3A		0x02
+
+#define	GPORC_1NONE		0x00
+#define	GPORC_1GIN0		0x04
+#define	GPORC_1GIN1		0x08
+#define	GPORC_1IO3C		0x0c
+
+#define	GPORC_2NONE		0x00
+#define	GPORC_2GIN0		0x10
+#define	GPORC_2GIN1		0x20
+#define	GPORC_2IO3E		0x20
+
+#define	GPORC_3NONE		0x00
+#define	GPORC_3GIN0		0x40
+#define	GPORC_3GIN1		0x80
+#define	GPORC_3IO3G		0xc0
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output data register.
+ */
+#define	GPOD_0MASK		0x03
+#define	GPOD_0SET1		0x00
+#define	GPOD_0SET0		0x01
+#define	GPOD_0SETR0		0x02
+#define	GPOD_0SETIO3B		0x03
+
+#define	GPOD_1MASK		0x0c
+#define	GPOD_1SET1		0x00
+#define	GPOD_1SET0		0x04
+#define	GPOD_1SETR0		0x08
+#define	GPOD_1SETIO3D		0x0c
+
+#define	GPOD_2MASK		0x30
+#define	GPOD_2SET1		0x00
+#define	GPOD_2SET0		0x10
+#define	GPOD_2SETR0		0x20
+#define	GPOD_2SETIO3F		0x30
+
+#define	GPOD_3MASK		0xc0
+#define	GPOD_3SET1		0x00
+#define	GPOD_3SET0		0x40
+#define	GPOD_3SETR0		0x80
+#define	GPOD_3SETIO3H		0xc0
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
new file mode 100644
index 000000000000..7f717e95ae37
--- /dev/null
+++ b/include/linux/scatterlist.h
@@ -0,0 +1,14 @@
+#ifndef _LINUX_SCATTERLIST_H
+#define _LINUX_SCATTERLIST_H
+
+static inline void sg_init_one(struct scatterlist *sg,
+			       u8 *buf, unsigned int buflen)
+{
+	memset(sg, 0, sizeof(*sg));
+
+	sg->page = virt_to_page(buf);
+	sg->offset = offset_in_page(buf);
+	sg->length = buflen;
+}
+
+#endif /* _LINUX_SCATTERLIST_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
new file mode 100644
index 000000000000..885a4a02b23c
--- /dev/null
+++ b/include/linux/scc.h
@@ -0,0 +1,253 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef	_SCC_H
+#define	_SCC_H
+
+#include <linux/config.h>
+
+/* selection of hardware types */
+
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE		0x01    /* hardware type for EAGLE card */
+#define PC100		0x02	/* hardware type for PC100 card */
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+	SIOCSCCRESERVED = SIOCDEVPRIVATE,
+	SIOCSCCCFG,
+	SIOCSCCINI,
+	SIOCSCCCHANINI,
+	SIOCSCCSMEM,
+	SIOCSCCGKISS,
+	SIOCSCCSKISS,
+	SIOCSCCGSTAT,
+	SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+	PARAM_DATA,
+	PARAM_TXDELAY,
+	PARAM_PERSIST,
+	PARAM_SLOTTIME,
+	PARAM_TXTAIL,
+	PARAM_FULLDUP,
+	PARAM_SOFTDCD,		/* was: PARAM_HW */
+	PARAM_MUTE,		/* ??? */
+	PARAM_DTR,
+	PARAM_RTS,
+	PARAM_SPEED,
+	PARAM_ENDDELAY,		/* ??? */
+	PARAM_GROUP,
+	PARAM_IDLE,
+	PARAM_MIN,
+	PARAM_MAXKEY,
+	PARAM_WAIT,
+	PARAM_MAXDEFER,
+	PARAM_TX,
+	PARAM_HWEVENT = 31,
+	PARAM_RETURN = 255	/* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF	65535U	/* to switch off timers */
+#define NO_SUCH_PARAM	65534U	/* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+	HWEV_DCD_ON,
+	HWEV_DCD_OFF,
+	HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP		0100	/* if set, only tx when all channels clear */
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+	CLK_DPLL,	/* normal halfduplex operation */
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
+			/* modems without clock regeneration */
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
+			/* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+	TXS_IDLE,	/* Transmitter off, no data pending */
+	TXS_BUSY,	/* waiting for permission to send / tailtime */
+	TXS_ACTIVE,	/* Transmitter on, sending data */
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
+	TXS_IDLE2,	/* Transmitter on, no data pending */
+	TXS_WAIT,	/* Waiting for Mintime to expire */
+	TXS_TIMEOUT	/* We had a transmission timeout */
+};
+
+typedef unsigned long io_port;	/* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+        long rxints;            /* Receiver interrupts */
+        long txints;            /* Transmitter interrupts */
+        long exints;            /* External/status interrupts */
+        long spints;            /* Special receiver interrupts */
+
+        long txframes;          /* Packets sent */
+        long rxframes;          /* Number of Frames Actually Received */
+        long rxerrs;            /* CRC Errors */
+        long txerrs;		/* KISS errors */
+        
+	unsigned int nospace;	/* "Out of buffers" */
+	unsigned int rx_over;	/* Receiver Overruns */
+	unsigned int tx_under;	/* Transmitter Underruns */
+
+	unsigned int tx_state;	/* Transmitter state */
+	int tx_queued;		/* tx frames enqueued */
+
+	unsigned int maxqueue;	/* allocated tx_buffers */
+	unsigned int bufsize;	/* used buffersize */
+};
+
+struct scc_modem {
+	long speed;		/* Line speed, bps */
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
+	char nrz;		/* NRZ instead of NRZI */	
+};
+
+struct scc_kiss_cmd {
+	int  	 command;	/* one of the KISS-Commands defined above */
+	unsigned param;		/* KISS-Param */
+};
+
+struct scc_hw_config {
+	io_port data_a;		/* data port channel A */
+	io_port ctrl_a;		/* control port channel A */
+	io_port data_b;		/* data port channel B */
+	io_port ctrl_b;		/* control port channel B */
+	io_port vector_latch;	/* INTACK-Latch (#) */
+	io_port	special;	/* special function port */
+
+	int	irq;		/* irq */
+	long	clock;		/* clock */
+	char	option;		/* command for function port */
+
+	char brand;		/* hardware type */
+	char escc;		/* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+	unsigned int dummy;
+	unsigned int bufsize;
+};
+
+struct scc_calibrate {
+	unsigned int time;
+	unsigned char pattern;
+};
+
+#ifdef __KERNEL__
+
+enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
+
+/* Vector masks in RR2B */
+
+#define VECTOR_MASK	0x06
+#define TXINT		0x00
+#define EXINT		0x02
+#define RXINT		0x04
+#define SPINT		0x06
+
+#ifdef CONFIG_SCC_DELAY
+#define Inb(port)	inb_p(port)
+#define Outb(port, val)	outb_p(val, port)
+#else
+#define Inb(port)	inb(port)
+#define Outb(port, val)	outb(val, port)
+#endif
+
+/* SCC channel control structure for KISS */
+
+struct scc_kiss {
+	unsigned char txdelay;		/* Transmit Delay 10 ms/cnt */
+	unsigned char persist;		/* Persistence (0-255) as a % */
+	unsigned char slottime;		/* Delay to wait on persistence hit */
+	unsigned char tailtime;		/* Delay after last byte written */
+	unsigned char fulldup;		/* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
+	unsigned char waittime;		/* Waittime before any transmit attempt */
+	unsigned int  maxkeyup;		/* Maximum time to transmit (seconds) */
+	unsigned int  mintime;		/* Minimal offtime after MAXKEYUP timeout (seconds) */
+	unsigned int  idletime;		/* Maximum idle time in ALWAYS KEYED mode (seconds) */
+	unsigned int  maxdefer;		/* Timer for CSMA channel busy limit */
+	unsigned char tx_inhibit;	/* Transmit is not allowed when set */	
+	unsigned char group;		/* Group ID for AX.25 TX interlocking */
+	unsigned char mode;		/* 'normal' or 'hwctrl' mode (unused) */
+	unsigned char softdcd;		/* Use DPLL instead of DCD pin for carrier detect */
+};
+
+
+/* SCC channel structure */
+
+struct scc_channel {
+	int init;			/* channel exists? */
+
+	struct net_device *dev;		/* link to device control structure */
+	struct net_device_stats dev_stat;/* device statistics */
+
+	char brand;			/* manufacturer of the board */
+	long clock;			/* used clock */
+
+	io_port ctrl;			/* I/O address of CONTROL register */
+	io_port	data;			/* I/O address of DATA register */
+	io_port special;		/* I/O address of special function port */
+	int irq;			/* Number of Interrupt */
+
+	char option;
+	char enhanced;			/* Enhanced SCC support */
+
+	unsigned char wreg[16]; 	/* Copy of last written value in WRx */
+	unsigned char status;		/* Copy of R0 at last external interrupt */
+	unsigned char dcd;		/* DCD status */
+
+        struct scc_kiss kiss;		/* control structure for KISS params */
+        struct scc_stat stat;		/* statistical information */
+        struct scc_modem modem; 	/* modem information */
+
+        struct sk_buff_head tx_queue;	/* next tx buffer */
+        struct sk_buff *rx_buff;	/* pointer to frame currently received */
+        struct sk_buff *tx_buff;	/* pointer to frame currently transmitted */
+
+	/* Timer */
+	struct timer_list tx_t;		/* tx timer for this channel */
+	struct timer_list tx_wdog;	/* tx watchdogs */
+	
+	/* Channel lock */
+	spinlock_t	lock;		/* Channel guard lock */
+};
+
+#endif /* defined(__KERNEL__) */
+#endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
new file mode 100644
index 000000000000..a30e91f40da6
--- /dev/null
+++ b/include/linux/sched.h
@@ -0,0 +1,1273 @@
+#ifndef _LINUX_SCHED_H
+#define _LINUX_SCHED_H
+
+#include <asm/param.h>	/* for HZ */
+
+#include <linux/config.h>
+#include <linux/capability.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/timex.h>
+#include <linux/jiffies.h>
+#include <linux/rbtree.h>
+#include <linux/thread_info.h>
+#include <linux/cpumask.h>
+#include <linux/errno.h>
+#include <linux/nodemask.h>
+
+#include <asm/system.h>
+#include <asm/semaphore.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/mmu.h>
+#include <asm/cputime.h>
+
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/signal.h>
+#include <linux/securebits.h>
+#include <linux/fs_struct.h>
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/pid.h>
+#include <linux/percpu.h>
+#include <linux/topology.h>
+#include <linux/seccomp.h>
+
+struct exec_domain;
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New namespace group? */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+#define CLONE_STOPPED		0x02000000	/* Start in stopped state */
+
+/*
+ * List of flags we want to share for kernel threads,
+ * if only because they are not used by them anyway.
+ */
+#define CLONE_KERNEL	(CLONE_FS | CLONE_FILES | CLONE_SIGHAND)
+
+/*
+ * These are the constant used to fake the fixed-point load-average
+ * counting. Some notes:
+ *  - 11 bit fractions expand to 22 bits by the multiplies: this gives
+ *    a load-average precision of 10 bits integer + 11 bits fractional
+ *  - if you want to count load-averages more often, you need more
+ *    precision, or rounding will get you. With 2-second counting freq,
+ *    the EXP_n values would be 1981, 2034 and 2043 if still using only
+ *    11 bit fractions.
+ */
+extern unsigned long avenrun[];		/* Load averages */
+
+#define FSHIFT		11		/* nr of bits of precision */
+#define FIXED_1		(1<<FSHIFT)	/* 1.0 as fixed-point */
+#define LOAD_FREQ	(5*HZ)		/* 5 sec intervals */
+#define EXP_1		1884		/* 1/exp(5sec/1min) as fixed-point */
+#define EXP_5		2014		/* 1/exp(5sec/5min) */
+#define EXP_15		2037		/* 1/exp(5sec/15min) */
+
+#define CALC_LOAD(load,exp,n) \
+	load *= exp; \
+	load += n*(FIXED_1-exp); \
+	load >>= FSHIFT;
+
+extern unsigned long total_forks;
+extern int nr_threads;
+extern int last_pid;
+DECLARE_PER_CPU(unsigned long, process_counts);
+extern int nr_processes(void);
+extern unsigned long nr_running(void);
+extern unsigned long nr_uninterruptible(void);
+extern unsigned long nr_iowait(void);
+
+#include <linux/time.h>
+#include <linux/param.h>
+#include <linux/resource.h>
+#include <linux/timer.h>
+
+#include <asm/processor.h>
+
+#define TASK_RUNNING		0
+#define TASK_INTERRUPTIBLE	1
+#define TASK_UNINTERRUPTIBLE	2
+#define TASK_STOPPED		4
+#define TASK_TRACED		8
+#define EXIT_ZOMBIE		16
+#define EXIT_DEAD		32
+
+#define __set_task_state(tsk, state_value)		\
+	do { (tsk)->state = (state_value); } while (0)
+#define set_task_state(tsk, state_value)		\
+	set_mb((tsk)->state, (state_value))
+
+#define __set_current_state(state_value)			\
+	do { current->state = (state_value); } while (0)
+#define set_current_state(state_value)		\
+	set_mb(current->state, (state_value))
+
+/* Task command name length */
+#define TASK_COMM_LEN 16
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+
+struct sched_param {
+	int sched_priority;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+/*
+ * This serializes "schedule()" and also protects
+ * the run-queue from deletions/modifications (but
+ * _adding_ to the beginning of the run-queue has
+ * a separate lock).
+ */
+extern rwlock_t tasklist_lock;
+extern spinlock_t mmlist_lock;
+
+typedef struct task_struct task_t;
+
+extern void sched_init(void);
+extern void sched_init_smp(void);
+extern void init_idle(task_t *idle, int cpu);
+
+extern cpumask_t nohz_cpu_mask;
+
+extern void show_state(void);
+extern void show_regs(struct pt_regs *);
+
+/*
+ * TASK is a pointer to the task whose backtrace we want to see (or NULL for current
+ * task), SP is the stack pointer of the first frame that should be shown in the back
+ * trace (or NULL if the entire call-chain of the task should be shown).
+ */
+extern void show_stack(struct task_struct *task, unsigned long *sp);
+
+void io_schedule(void);
+long io_schedule_timeout(long timeout);
+
+extern void cpu_init (void);
+extern void trap_init(void);
+extern void update_process_times(int user);
+extern void scheduler_tick(void);
+
+/* Attach to any functions which should be ignored in wchan output. */
+#define __sched		__attribute__((__section__(".sched.text")))
+/* Is this address in the __sched functions? */
+extern int in_sched_functions(unsigned long addr);
+
+#define	MAX_SCHEDULE_TIMEOUT	LONG_MAX
+extern signed long FASTCALL(schedule_timeout(signed long timeout));
+asmlinkage void schedule(void);
+
+struct namespace;
+
+/* Maximum number of active map areas.. This is a random (large) number */
+#define DEFAULT_MAX_MAP_COUNT	65536
+
+extern int sysctl_max_map_count;
+
+#include <linux/aio.h>
+
+extern unsigned long
+arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+extern unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+			  unsigned long len, unsigned long pgoff,
+			  unsigned long flags);
+extern void arch_unmap_area(struct vm_area_struct *area);
+extern void arch_unmap_area_topdown(struct vm_area_struct *area);
+
+#define set_mm_counter(mm, member, value) (mm)->_##member = (value)
+#define get_mm_counter(mm, member) ((mm)->_##member)
+#define add_mm_counter(mm, member, value) (mm)->_##member += (value)
+#define inc_mm_counter(mm, member) (mm)->_##member++
+#define dec_mm_counter(mm, member) (mm)->_##member--
+typedef unsigned long mm_counter_t;
+
+struct mm_struct {
+	struct vm_area_struct * mmap;		/* list of VMAs */
+	struct rb_root mm_rb;
+	struct vm_area_struct * mmap_cache;	/* last find_vma result */
+	unsigned long (*get_unmapped_area) (struct file *filp,
+				unsigned long addr, unsigned long len,
+				unsigned long pgoff, unsigned long flags);
+	void (*unmap_area) (struct vm_area_struct *area);
+	unsigned long mmap_base;		/* base of mmap area */
+	unsigned long free_area_cache;		/* first hole */
+	pgd_t * pgd;
+	atomic_t mm_users;			/* How many users with user space? */
+	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
+	int map_count;				/* number of VMAs */
+	struct rw_semaphore mmap_sem;
+	spinlock_t page_table_lock;		/* Protects page tables and some counters */
+
+	struct list_head mmlist;		/* List of maybe swapped mm's.  These are globally strung
+						 * together off init_mm.mmlist, and are protected
+						 * by mmlist_lock
+						 */
+
+	unsigned long start_code, end_code, start_data, end_data;
+	unsigned long start_brk, brk, start_stack;
+	unsigned long arg_start, arg_end, env_start, env_end;
+	unsigned long total_vm, locked_vm, shared_vm;
+	unsigned long exec_vm, stack_vm, reserved_vm, def_flags, nr_ptes;
+
+	/* Special counters protected by the page_table_lock */
+	mm_counter_t _rss;
+	mm_counter_t _anon_rss;
+
+	unsigned long saved_auxv[42]; /* for /proc/PID/auxv */
+
+	unsigned dumpable:1;
+	cpumask_t cpu_vm_mask;
+
+	/* Architecture-specific MM context */
+	mm_context_t context;
+
+	/* Token based thrashing protection. */
+	unsigned long swap_token_time;
+	char recent_pagein;
+
+	/* coredumping support */
+	int core_waiters;
+	struct completion *core_startup_done, core_done;
+
+	/* aio bits */
+	rwlock_t		ioctx_list_lock;
+	struct kioctx		*ioctx_list;
+
+	struct kioctx		default_kioctx;
+
+	unsigned long hiwater_rss;	/* High-water RSS usage */
+	unsigned long hiwater_vm;	/* High-water virtual memory usage */
+};
+
+struct sighand_struct {
+	atomic_t		count;
+	struct k_sigaction	action[_NSIG];
+	spinlock_t		siglock;
+};
+
+/*
+ * NOTE! "signal_struct" does not have it's own
+ * locking, because a shared signal_struct always
+ * implies a shared sighand_struct, so locking
+ * sighand_struct is always a proper superset of
+ * the locking of signal_struct.
+ */
+struct signal_struct {
+	atomic_t		count;
+	atomic_t		live;
+
+	wait_queue_head_t	wait_chldexit;	/* for wait4() */
+
+	/* current thread group signal load-balancing target: */
+	task_t			*curr_target;
+
+	/* shared signal handling: */
+	struct sigpending	shared_pending;
+
+	/* thread group exit support */
+	int			group_exit_code;
+	/* overloaded:
+	 * - notify group_exit_task when ->count is equal to notify_count
+	 * - everyone except group_exit_task is stopped during signal delivery
+	 *   of fatal signals, group_exit_task processes the signal.
+	 */
+	struct task_struct	*group_exit_task;
+	int			notify_count;
+
+	/* thread group stop support, overloads group_exit_code too */
+	int			group_stop_count;
+	unsigned int		flags; /* see SIGNAL_* flags below */
+
+	/* POSIX.1b Interval Timers */
+	struct list_head posix_timers;
+
+	/* ITIMER_REAL timer for the process */
+	struct timer_list real_timer;
+	unsigned long it_real_value, it_real_incr;
+
+	/* ITIMER_PROF and ITIMER_VIRTUAL timers for the process */
+	cputime_t it_prof_expires, it_virt_expires;
+	cputime_t it_prof_incr, it_virt_incr;
+
+	/* job control IDs */
+	pid_t pgrp;
+	pid_t tty_old_pgrp;
+	pid_t session;
+	/* boolean value for session group leader */
+	int leader;
+
+	struct tty_struct *tty; /* NULL if no tty */
+
+	/*
+	 * Cumulative resource counters for dead threads in the group,
+	 * and for reaped dead child processes forked by this group.
+	 * Live threads maintain their own counters and add to these
+	 * in __exit_signal, except for the group leader.
+	 */
+	cputime_t utime, stime, cutime, cstime;
+	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
+	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
+
+	/*
+	 * Cumulative ns of scheduled CPU time for dead threads in the
+	 * group, not including a zombie group leader.  (This only differs
+	 * from jiffies_to_ns(utime + stime) if sched_clock uses something
+	 * other than jiffies.)
+	 */
+	unsigned long long sched_time;
+
+	/*
+	 * We don't bother to synchronize most readers of this at all,
+	 * because there is no reader checking a limit that actually needs
+	 * to get both rlim_cur and rlim_max atomically, and either one
+	 * alone is a single word that can safely be read normally.
+	 * getrlimit/setrlimit use task_lock(current->group_leader) to
+	 * protect this instead of the siglock, because they really
+	 * have no need to disable irqs.
+	 */
+	struct rlimit rlim[RLIM_NLIMITS];
+
+	struct list_head cpu_timers[3];
+
+	/* keep the process-shared keyrings here so that they do the right
+	 * thing in threads created with CLONE_THREAD */
+#ifdef CONFIG_KEYS
+	struct key *session_keyring;	/* keyring inherited over fork */
+	struct key *process_keyring;	/* keyring private to this process */
+#endif
+};
+
+/*
+ * Bits in flags field of signal_struct.
+ */
+#define SIGNAL_STOP_STOPPED	0x00000001 /* job control stop in effect */
+#define SIGNAL_STOP_DEQUEUED	0x00000002 /* stop signal dequeued */
+#define SIGNAL_STOP_CONTINUED	0x00000004 /* SIGCONT since WCONTINUED reap */
+#define SIGNAL_GROUP_EXIT	0x00000008 /* group exit in progress */
+
+
+/*
+ * Priority of a process goes from 0..MAX_PRIO-1, valid RT
+ * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL tasks are
+ * in the range MAX_RT_PRIO..MAX_PRIO-1. Priority values
+ * are inverted: lower p->prio value means higher priority.
+ *
+ * The MAX_USER_RT_PRIO value allows the actual maximum
+ * RT priority to be separate from the value exported to
+ * user-space.  This allows kernel threads to set their
+ * priority to a value higher than any user task. Note:
+ * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+ */
+
+#define MAX_USER_RT_PRIO	100
+#define MAX_RT_PRIO		MAX_USER_RT_PRIO
+
+#define MAX_PRIO		(MAX_RT_PRIO + 40)
+
+#define rt_task(p)		(unlikely((p)->prio < MAX_RT_PRIO))
+
+/*
+ * Some day this will be a full-fledged user tracking system..
+ */
+struct user_struct {
+	atomic_t __count;	/* reference count */
+	atomic_t processes;	/* How many processes does this user have? */
+	atomic_t files;		/* How many open files does this user have? */
+	atomic_t sigpending;	/* How many pending signals does this user have? */
+	/* protected by mq_lock	*/
+	unsigned long mq_bytes;	/* How many bytes can be allocated to mqueue? */
+	unsigned long locked_shm; /* How many pages of mlocked shm ? */
+
+#ifdef CONFIG_KEYS
+	struct key *uid_keyring;	/* UID specific keyring */
+	struct key *session_keyring;	/* UID's default session keyring */
+#endif
+
+	/* Hash table maintenance information */
+	struct list_head uidhash_list;
+	uid_t uid;
+};
+
+extern struct user_struct *find_user(uid_t);
+
+extern struct user_struct root_user;
+#define INIT_USER (&root_user)
+
+typedef struct prio_array prio_array_t;
+struct backing_dev_info;
+struct reclaim_state;
+
+#ifdef CONFIG_SCHEDSTATS
+struct sched_info {
+	/* cumulative counters */
+	unsigned long	cpu_time,	/* time spent on the cpu */
+			run_delay,	/* time spent waiting on a runqueue */
+			pcnt;		/* # of timeslices run on this cpu */
+
+	/* timestamps */
+	unsigned long	last_arrival,	/* when we last ran on a cpu */
+			last_queued;	/* when we were last queued to run */
+};
+
+extern struct file_operations proc_schedstat_operations;
+#endif
+
+enum idle_type
+{
+	SCHED_IDLE,
+	NOT_IDLE,
+	NEWLY_IDLE,
+	MAX_IDLE_TYPES
+};
+
+/*
+ * sched-domains (multiprocessor balancing) declarations:
+ */
+#ifdef CONFIG_SMP
+#define SCHED_LOAD_SCALE	128UL	/* increase resolution of load */
+
+#define SD_LOAD_BALANCE		1	/* Do load balancing on this domain. */
+#define SD_BALANCE_NEWIDLE	2	/* Balance when about to become idle */
+#define SD_BALANCE_EXEC		4	/* Balance on exec */
+#define SD_WAKE_IDLE		8	/* Wake to idle CPU on task wakeup */
+#define SD_WAKE_AFFINE		16	/* Wake task to waking CPU */
+#define SD_WAKE_BALANCE		32	/* Perform balancing at task wakeup */
+#define SD_SHARE_CPUPOWER	64	/* Domain members share cpu power */
+
+struct sched_group {
+	struct sched_group *next;	/* Must be a circular list */
+	cpumask_t cpumask;
+
+	/*
+	 * CPU power of this group, SCHED_LOAD_SCALE being max power for a
+	 * single CPU. This is read only (except for setup, hotplug CPU).
+	 */
+	unsigned long cpu_power;
+};
+
+struct sched_domain {
+	/* These fields must be setup */
+	struct sched_domain *parent;	/* top domain must be null terminated */
+	struct sched_group *groups;	/* the balancing groups of the domain */
+	cpumask_t span;			/* span of all CPUs in this domain */
+	unsigned long min_interval;	/* Minimum balance interval ms */
+	unsigned long max_interval;	/* Maximum balance interval ms */
+	unsigned int busy_factor;	/* less balancing by factor if busy */
+	unsigned int imbalance_pct;	/* No balance until over watermark */
+	unsigned long long cache_hot_time; /* Task considered cache hot (ns) */
+	unsigned int cache_nice_tries;	/* Leave cache hot tasks for # tries */
+	unsigned int per_cpu_gain;	/* CPU % gained by adding domain cpus */
+	int flags;			/* See SD_* */
+
+	/* Runtime fields. */
+	unsigned long last_balance;	/* init to jiffies. units in jiffies */
+	unsigned int balance_interval;	/* initialise to 1. units in ms. */
+	unsigned int nr_balance_failed; /* initialise to 0 */
+
+#ifdef CONFIG_SCHEDSTATS
+	/* load_balance() stats */
+	unsigned long lb_cnt[MAX_IDLE_TYPES];
+	unsigned long lb_failed[MAX_IDLE_TYPES];
+	unsigned long lb_balanced[MAX_IDLE_TYPES];
+	unsigned long lb_imbalance[MAX_IDLE_TYPES];
+	unsigned long lb_gained[MAX_IDLE_TYPES];
+	unsigned long lb_hot_gained[MAX_IDLE_TYPES];
+	unsigned long lb_nobusyg[MAX_IDLE_TYPES];
+	unsigned long lb_nobusyq[MAX_IDLE_TYPES];
+
+	/* Active load balancing */
+	unsigned long alb_cnt;
+	unsigned long alb_failed;
+	unsigned long alb_pushed;
+
+	/* sched_balance_exec() stats */
+	unsigned long sbe_attempts;
+	unsigned long sbe_pushed;
+
+	/* try_to_wake_up() stats */
+	unsigned long ttwu_wake_remote;
+	unsigned long ttwu_move_affine;
+	unsigned long ttwu_move_balance;
+#endif
+};
+
+#ifdef ARCH_HAS_SCHED_DOMAIN
+/* Useful helpers that arch setup code may use. Defined in kernel/sched.c */
+extern cpumask_t cpu_isolated_map;
+extern void init_sched_build_groups(struct sched_group groups[],
+	                        cpumask_t span, int (*group_fn)(int cpu));
+extern void cpu_attach_domain(struct sched_domain *sd, int cpu);
+#endif /* ARCH_HAS_SCHED_DOMAIN */
+#endif /* CONFIG_SMP */
+
+
+struct io_context;			/* See blkdev.h */
+void exit_io_context(void);
+struct cpuset;
+
+#define NGROUPS_SMALL		32
+#define NGROUPS_PER_BLOCK	((int)(PAGE_SIZE / sizeof(gid_t)))
+struct group_info {
+	int ngroups;
+	atomic_t usage;
+	gid_t small_block[NGROUPS_SMALL];
+	int nblocks;
+	gid_t *blocks[0];
+};
+
+/*
+ * get_group_info() must be called with the owning task locked (via task_lock())
+ * when task != current.  The reason being that the vast majority of callers are
+ * looking at current->group_info, which can not be changed except by the
+ * current task.  Changing current->group_info requires the task lock, too.
+ */
+#define get_group_info(group_info) do { \
+	atomic_inc(&(group_info)->usage); \
+} while (0)
+
+#define put_group_info(group_info) do { \
+	if (atomic_dec_and_test(&(group_info)->usage)) \
+		groups_free(group_info); \
+} while (0)
+
+struct group_info *groups_alloc(int gidsetsize);
+void groups_free(struct group_info *group_info);
+int set_current_groups(struct group_info *group_info);
+/* access the groups "array" with this macro */
+#define GROUP_AT(gi, i) \
+    ((gi)->blocks[(i)/NGROUPS_PER_BLOCK][(i)%NGROUPS_PER_BLOCK])
+
+
+struct audit_context;		/* See audit.c */
+struct mempolicy;
+
+struct task_struct {
+	volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
+	struct thread_info *thread_info;
+	atomic_t usage;
+	unsigned long flags;	/* per process flags, defined below */
+	unsigned long ptrace;
+
+	int lock_depth;		/* Lock depth */
+
+	int prio, static_prio;
+	struct list_head run_list;
+	prio_array_t *array;
+
+	unsigned long sleep_avg;
+	unsigned long long timestamp, last_ran;
+	unsigned long long sched_time; /* sched_clock time spent running */
+	int activated;
+
+	unsigned long policy;
+	cpumask_t cpus_allowed;
+	unsigned int time_slice, first_time_slice;
+
+#ifdef CONFIG_SCHEDSTATS
+	struct sched_info sched_info;
+#endif
+
+	struct list_head tasks;
+	/*
+	 * ptrace_list/ptrace_children forms the list of my children
+	 * that were stolen by a ptracer.
+	 */
+	struct list_head ptrace_children;
+	struct list_head ptrace_list;
+
+	struct mm_struct *mm, *active_mm;
+
+/* task state */
+	struct linux_binfmt *binfmt;
+	long exit_state;
+	int exit_code, exit_signal;
+	int pdeath_signal;  /*  The signal sent when the parent dies  */
+	/* ??? */
+	unsigned long personality;
+	unsigned did_exec:1;
+	pid_t pid;
+	pid_t tgid;
+	/* 
+	 * pointers to (original) parent process, youngest child, younger sibling,
+	 * older sibling, respectively.  (p->father can be replaced with 
+	 * p->parent->pid)
+	 */
+	struct task_struct *real_parent; /* real parent process (when being debugged) */
+	struct task_struct *parent;	/* parent process */
+	/*
+	 * children/sibling forms the list of my children plus the
+	 * tasks I'm ptracing.
+	 */
+	struct list_head children;	/* list of my children */
+	struct list_head sibling;	/* linkage in my parent's children list */
+	struct task_struct *group_leader;	/* threadgroup leader */
+
+	/* PID/PID hash table linkage. */
+	struct pid pids[PIDTYPE_MAX];
+
+	struct completion *vfork_done;		/* for vfork() */
+	int __user *set_child_tid;		/* CLONE_CHILD_SETTID */
+	int __user *clear_child_tid;		/* CLONE_CHILD_CLEARTID */
+
+	unsigned long rt_priority;
+	cputime_t utime, stime;
+	unsigned long nvcsw, nivcsw; /* context switch counts */
+	struct timespec start_time;
+/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
+	unsigned long min_flt, maj_flt;
+
+  	cputime_t it_prof_expires, it_virt_expires;
+	unsigned long long it_sched_expires;
+	struct list_head cpu_timers[3];
+
+/* process credentials */
+	uid_t uid,euid,suid,fsuid;
+	gid_t gid,egid,sgid,fsgid;
+	struct group_info *group_info;
+	kernel_cap_t   cap_effective, cap_inheritable, cap_permitted;
+	unsigned keep_capabilities:1;
+	struct user_struct *user;
+#ifdef CONFIG_KEYS
+	struct key *thread_keyring;	/* keyring private to this thread */
+#endif
+	int oomkilladj; /* OOM kill score adjustment (bit shift). */
+	char comm[TASK_COMM_LEN];
+/* file system info */
+	int link_count, total_link_count;
+/* ipc stuff */
+	struct sysv_sem sysvsem;
+/* CPU-specific state of this task */
+	struct thread_struct thread;
+/* filesystem information */
+	struct fs_struct *fs;
+/* open file information */
+	struct files_struct *files;
+/* namespace */
+	struct namespace *namespace;
+/* signal handlers */
+	struct signal_struct *signal;
+	struct sighand_struct *sighand;
+
+	sigset_t blocked, real_blocked;
+	struct sigpending pending;
+
+	unsigned long sas_ss_sp;
+	size_t sas_ss_size;
+	int (*notifier)(void *priv);
+	void *notifier_data;
+	sigset_t *notifier_mask;
+	
+	void *security;
+	struct audit_context *audit_context;
+	seccomp_t seccomp;
+
+/* Thread group tracking */
+   	u32 parent_exec_id;
+   	u32 self_exec_id;
+/* Protection of (de-)allocation: mm, files, fs, tty, keyrings */
+	spinlock_t alloc_lock;
+/* Protection of proc_dentry: nesting proc_lock, dcache_lock, write_lock_irq(&tasklist_lock); */
+	spinlock_t proc_lock;
+/* context-switch lock */
+	spinlock_t switch_lock;
+
+/* journalling filesystem info */
+	void *journal_info;
+
+/* VM state */
+	struct reclaim_state *reclaim_state;
+
+	struct dentry *proc_dentry;
+	struct backing_dev_info *backing_dev_info;
+
+	struct io_context *io_context;
+
+	unsigned long ptrace_message;
+	siginfo_t *last_siginfo; /* For ptrace use.  */
+/*
+ * current io wait handle: wait queue entry to use for io waits
+ * If this thread is processing aio, this points at the waitqueue
+ * inside the currently handled kiocb. It may be NULL (i.e. default
+ * to a stack based synchronous wait) if its doing sync IO.
+ */
+	wait_queue_t *io_wait;
+/* i/o counters(bytes read/written, #syscalls */
+	u64 rchar, wchar, syscr, syscw;
+#if defined(CONFIG_BSD_PROCESS_ACCT)
+	u64 acct_rss_mem1;	/* accumulated rss usage */
+	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
+	clock_t acct_stimexpd;	/* clock_t-converted stime since last update */
+#endif
+#ifdef CONFIG_NUMA
+  	struct mempolicy *mempolicy;
+	short il_next;
+#endif
+#ifdef CONFIG_CPUSETS
+	struct cpuset *cpuset;
+	nodemask_t mems_allowed;
+	int cpuset_mems_generation;
+#endif
+};
+
+static inline pid_t process_group(struct task_struct *tsk)
+{
+	return tsk->signal->pgrp;
+}
+
+/**
+ * pid_alive - check that a task structure is not stale
+ * @p: Task structure to be checked.
+ *
+ * Test if a process is not yet dead (at most zombie state)
+ * If pid_alive fails, then pointers within the task structure
+ * can be stale and must not be dereferenced.
+ */
+static inline int pid_alive(struct task_struct *p)
+{
+	return p->pids[PIDTYPE_PID].nr != 0;
+}
+
+extern void free_task(struct task_struct *tsk);
+extern void __put_task_struct(struct task_struct *tsk);
+#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
+#define put_task_struct(tsk) \
+do { if (atomic_dec_and_test(&(tsk)->usage)) __put_task_struct(tsk); } while(0)
+
+/*
+ * Per process flags
+ */
+#define PF_ALIGNWARN	0x00000001	/* Print alignment warning msgs */
+					/* Not implemented yet, only for 486*/
+#define PF_STARTING	0x00000002	/* being created */
+#define PF_EXITING	0x00000004	/* getting shut down */
+#define PF_DEAD		0x00000008	/* Dead */
+#define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
+#define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
+#define PF_DUMPCORE	0x00000200	/* dumped core */
+#define PF_SIGNALED	0x00000400	/* killed by a signal */
+#define PF_MEMALLOC	0x00000800	/* Allocating memory */
+#define PF_FLUSHER	0x00001000	/* responsible for disk writeback */
+#define PF_USED_MATH	0x00002000	/* if unset the fpu must be initialized before use */
+#define PF_FREEZE	0x00004000	/* this task is being frozen for suspend now */
+#define PF_NOFREEZE	0x00008000	/* this thread should not be frozen */
+#define PF_FROZEN	0x00010000	/* frozen for system suspend */
+#define PF_FSTRANS	0x00020000	/* inside a filesystem transaction */
+#define PF_KSWAPD	0x00040000	/* I am kswapd */
+#define PF_SWAPOFF	0x00080000	/* I am in swapoff */
+#define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
+#define PF_SYNCWRITE	0x00200000	/* I am doing a sync write */
+#define PF_BORROWED_MM	0x00400000	/* I am a kthread doing use_mm */
+#define PF_RANDOMIZE	0x00800000	/* randomize virtual address space */
+
+/*
+ * Only the _current_ task can read/write to tsk->flags, but other
+ * tasks can access tsk->flags in readonly mode for example
+ * with tsk_used_math (like during threaded core dumping).
+ * There is however an exception to this rule during ptrace
+ * or during fork: the ptracer task is allowed to write to the
+ * child->flags of its traced child (same goes for fork, the parent
+ * can write to the child->flags), because we're guaranteed the
+ * child is not running and in turn not changing child->flags
+ * at the same time the parent does it.
+ */
+#define clear_stopped_child_used_math(child) do { (child)->flags &= ~PF_USED_MATH; } while (0)
+#define set_stopped_child_used_math(child) do { (child)->flags |= PF_USED_MATH; } while (0)
+#define clear_used_math() clear_stopped_child_used_math(current)
+#define set_used_math() set_stopped_child_used_math(current)
+#define conditional_stopped_child_used_math(condition, child) \
+	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= (condition) ? PF_USED_MATH : 0; } while (0)
+#define conditional_used_math(condition) \
+	conditional_stopped_child_used_math(condition, current)
+#define copy_to_stopped_child_used_math(child) \
+	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= current->flags & PF_USED_MATH; } while (0)
+/* NOTE: this will return 0 or PF_USED_MATH, it will never return 1 */
+#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
+#define used_math() tsk_used_math(current)
+
+#ifdef CONFIG_SMP
+extern int set_cpus_allowed(task_t *p, cpumask_t new_mask);
+#else
+static inline int set_cpus_allowed(task_t *p, cpumask_t new_mask)
+{
+	if (!cpus_intersects(new_mask, cpu_online_map))
+		return -EINVAL;
+	return 0;
+}
+#endif
+
+extern unsigned long long sched_clock(void);
+extern unsigned long long current_sched_time(const task_t *current_task);
+
+/* sched_exec is called by processes performing an exec */
+#ifdef CONFIG_SMP
+extern void sched_exec(void);
+#else
+#define sched_exec()   {}
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void idle_task_exit(void);
+#else
+static inline void idle_task_exit(void) {}
+#endif
+
+extern void sched_idle_next(void);
+extern void set_user_nice(task_t *p, long nice);
+extern int task_prio(const task_t *p);
+extern int task_nice(const task_t *p);
+extern int task_curr(const task_t *p);
+extern int idle_cpu(int cpu);
+extern int sched_setscheduler(struct task_struct *, int, struct sched_param *);
+extern task_t *idle_task(int cpu);
+
+void yield(void);
+
+/*
+ * The default (Linux) execution domain.
+ */
+extern struct exec_domain	default_exec_domain;
+
+union thread_union {
+	struct thread_info thread_info;
+	unsigned long stack[THREAD_SIZE/sizeof(long)];
+};
+
+#ifndef __HAVE_ARCH_KSTACK_END
+static inline int kstack_end(void *addr)
+{
+	/* Reliable end of stack detection:
+	 * Some APM bios versions misalign the stack
+	 */
+	return !(((unsigned long)addr+sizeof(void*)-1) & (THREAD_SIZE-sizeof(void*)));
+}
+#endif
+
+extern union thread_union init_thread_union;
+extern struct task_struct init_task;
+
+extern struct   mm_struct init_mm;
+
+#define find_task_by_pid(nr)	find_task_by_pid_type(PIDTYPE_PID, nr)
+extern struct task_struct *find_task_by_pid_type(int type, int pid);
+extern void set_special_pids(pid_t session, pid_t pgrp);
+extern void __set_special_pids(pid_t session, pid_t pgrp);
+
+/* per-UID process charging. */
+extern struct user_struct * alloc_uid(uid_t);
+static inline struct user_struct *get_uid(struct user_struct *u)
+{
+	atomic_inc(&u->__count);
+	return u;
+}
+extern void free_uid(struct user_struct *);
+extern void switch_uid(struct user_struct *);
+
+#include <asm/current.h>
+
+extern void do_timer(struct pt_regs *);
+
+extern int FASTCALL(wake_up_state(struct task_struct * tsk, unsigned int state));
+extern int FASTCALL(wake_up_process(struct task_struct * tsk));
+extern void FASTCALL(wake_up_new_task(struct task_struct * tsk,
+						unsigned long clone_flags));
+#ifdef CONFIG_SMP
+ extern void kick_process(struct task_struct *tsk);
+#else
+ static inline void kick_process(struct task_struct *tsk) { }
+#endif
+extern void FASTCALL(sched_fork(task_t * p));
+extern void FASTCALL(sched_exit(task_t * p));
+
+extern int in_group_p(gid_t);
+extern int in_egroup_p(gid_t);
+
+extern void proc_caches_init(void);
+extern void flush_signals(struct task_struct *);
+extern void flush_signal_handlers(struct task_struct *, int force_default);
+extern int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info);
+
+static inline int dequeue_signal_lock(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&tsk->sighand->siglock, flags);
+	ret = dequeue_signal(tsk, mask, info);
+	spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+
+	return ret;
+}	
+
+extern void block_all_signals(int (*notifier)(void *priv), void *priv,
+			      sigset_t *mask);
+extern void unblock_all_signals(void);
+extern void release_task(struct task_struct * p);
+extern int send_sig_info(int, struct siginfo *, struct task_struct *);
+extern int send_group_sig_info(int, struct siginfo *, struct task_struct *);
+extern int force_sigsegv(int, struct task_struct *);
+extern int force_sig_info(int, struct siginfo *, struct task_struct *);
+extern int __kill_pg_info(int sig, struct siginfo *info, pid_t pgrp);
+extern int kill_pg_info(int, struct siginfo *, pid_t);
+extern int kill_proc_info(int, struct siginfo *, pid_t);
+extern void do_notify_parent(struct task_struct *, int);
+extern void force_sig(int, struct task_struct *);
+extern void force_sig_specific(int, struct task_struct *);
+extern int send_sig(int, struct task_struct *, int);
+extern void zap_other_threads(struct task_struct *p);
+extern int kill_pg(pid_t, int, int);
+extern int kill_sl(pid_t, int, int);
+extern int kill_proc(pid_t, int, int);
+extern struct sigqueue *sigqueue_alloc(void);
+extern void sigqueue_free(struct sigqueue *);
+extern int send_sigqueue(int, struct sigqueue *,  struct task_struct *);
+extern int send_group_sigqueue(int, struct sigqueue *,  struct task_struct *);
+extern int do_sigaction(int, const struct k_sigaction *, struct k_sigaction *);
+extern int do_sigaltstack(const stack_t __user *, stack_t __user *, unsigned long);
+
+/* These can be the second arg to send_sig_info/send_group_sig_info.  */
+#define SEND_SIG_NOINFO ((struct siginfo *) 0)
+#define SEND_SIG_PRIV	((struct siginfo *) 1)
+#define SEND_SIG_FORCED	((struct siginfo *) 2)
+
+/* True if we are on the alternate signal stack.  */
+
+static inline int on_sig_stack(unsigned long sp)
+{
+	return (sp - current->sas_ss_sp < current->sas_ss_size);
+}
+
+static inline int sas_ss_flags(unsigned long sp)
+{
+	return (current->sas_ss_size == 0 ? SS_DISABLE
+		: on_sig_stack(sp) ? SS_ONSTACK : 0);
+}
+
+
+#ifdef CONFIG_SECURITY
+/* code is in security.c */
+extern int capable(int cap);
+#else
+static inline int capable(int cap)
+{
+	if (cap_raised(current->cap_effective, cap)) {
+		current->flags |= PF_SUPERPRIV;
+		return 1;
+	}
+	return 0;
+}
+#endif
+
+/*
+ * Routines for handling mm_structs
+ */
+extern struct mm_struct * mm_alloc(void);
+
+/* mmdrop drops the mm and the page tables */
+extern void FASTCALL(__mmdrop(struct mm_struct *));
+static inline void mmdrop(struct mm_struct * mm)
+{
+	if (atomic_dec_and_test(&mm->mm_count))
+		__mmdrop(mm);
+}
+
+/* mmput gets rid of the mappings and all user-space */
+extern void mmput(struct mm_struct *);
+/* Grab a reference to a task's mm, if it is not already going away */
+extern struct mm_struct *get_task_mm(struct task_struct *task);
+/* Remove the current tasks stale references to the old mm_struct */
+extern void mm_release(struct task_struct *, struct mm_struct *);
+
+extern int  copy_thread(int, unsigned long, unsigned long, unsigned long, struct task_struct *, struct pt_regs *);
+extern void flush_thread(void);
+extern void exit_thread(void);
+
+extern void exit_mm(struct task_struct *);
+extern void exit_files(struct task_struct *);
+extern void exit_signal(struct task_struct *);
+extern void __exit_signal(struct task_struct *);
+extern void exit_sighand(struct task_struct *);
+extern void __exit_sighand(struct task_struct *);
+extern void exit_itimers(struct signal_struct *);
+
+extern NORET_TYPE void do_group_exit(int);
+
+extern void reparent_to_init(void);
+extern void daemonize(const char *, ...);
+extern int allow_signal(int);
+extern int disallow_signal(int);
+extern task_t *child_reaper;
+
+extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *);
+extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
+task_t *fork_idle(int);
+
+extern void set_task_comm(struct task_struct *tsk, char *from);
+extern void get_task_comm(char *to, struct task_struct *tsk);
+
+#ifdef CONFIG_SMP
+extern void wait_task_inactive(task_t * p);
+#else
+#define wait_task_inactive(p)	do { } while (0)
+#endif
+
+#define remove_parent(p)	list_del_init(&(p)->sibling)
+#define add_parent(p, parent)	list_add_tail(&(p)->sibling,&(parent)->children)
+
+#define REMOVE_LINKS(p) do {					\
+	if (thread_group_leader(p))				\
+		list_del_init(&(p)->tasks);			\
+	remove_parent(p);					\
+	} while (0)
+
+#define SET_LINKS(p) do {					\
+	if (thread_group_leader(p))				\
+		list_add_tail(&(p)->tasks,&init_task.tasks);	\
+	add_parent(p, (p)->parent);				\
+	} while (0)
+
+#define next_task(p)	list_entry((p)->tasks.next, struct task_struct, tasks)
+#define prev_task(p)	list_entry((p)->tasks.prev, struct task_struct, tasks)
+
+#define for_each_process(p) \
+	for (p = &init_task ; (p = next_task(p)) != &init_task ; )
+
+/*
+ * Careful: do_each_thread/while_each_thread is a double loop so
+ *          'break' will not work as expected - use goto instead.
+ */
+#define do_each_thread(g, t) \
+	for (g = t = &init_task ; (g = t = next_task(g)) != &init_task ; ) do
+
+#define while_each_thread(g, t) \
+	while ((t = next_thread(t)) != g)
+
+extern task_t * FASTCALL(next_thread(const task_t *p));
+
+#define thread_group_leader(p)	(p->pid == p->tgid)
+
+static inline int thread_group_empty(task_t *p)
+{
+	return list_empty(&p->pids[PIDTYPE_TGID].pid_list);
+}
+
+#define delay_group_leader(p) \
+		(thread_group_leader(p) && !thread_group_empty(p))
+
+extern void unhash_process(struct task_struct *p);
+
+/*
+ * Protects ->fs, ->files, ->mm, ->ptrace, ->group_info, ->comm, keyring
+ * subscriptions and synchronises with wait4().  Also used in procfs.
+ *
+ * Nests both inside and outside of read_lock(&tasklist_lock).
+ * It must not be nested with write_lock_irq(&tasklist_lock),
+ * neither inside nor outside.
+ */
+static inline void task_lock(struct task_struct *p)
+{
+	spin_lock(&p->alloc_lock);
+}
+
+static inline void task_unlock(struct task_struct *p)
+{
+	spin_unlock(&p->alloc_lock);
+}
+
+/* set thread flags in other task's structures
+ * - see asm/thread_info.h for TIF_xxxx flags available
+ */
+static inline void set_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	set_ti_thread_flag(tsk->thread_info,flag);
+}
+
+static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	clear_ti_thread_flag(tsk->thread_info,flag);
+}
+
+static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_and_set_ti_thread_flag(tsk->thread_info,flag);
+}
+
+static inline int test_and_clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_and_clear_ti_thread_flag(tsk->thread_info,flag);
+}
+
+static inline int test_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_ti_thread_flag(tsk->thread_info,flag);
+}
+
+static inline void set_tsk_need_resched(struct task_struct *tsk)
+{
+	set_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
+}
+
+static inline void clear_tsk_need_resched(struct task_struct *tsk)
+{
+	clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
+}
+
+static inline int signal_pending(struct task_struct *p)
+{
+	return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
+}
+  
+static inline int need_resched(void)
+{
+	return unlikely(test_thread_flag(TIF_NEED_RESCHED));
+}
+
+/*
+ * cond_resched() and cond_resched_lock(): latency reduction via
+ * explicit rescheduling in places that are safe. The return
+ * value indicates whether a reschedule was done in fact.
+ * cond_resched_lock() will drop the spinlock before scheduling,
+ * cond_resched_softirq() will enable bhs before scheduling.
+ */
+extern int cond_resched(void);
+extern int cond_resched_lock(spinlock_t * lock);
+extern int cond_resched_softirq(void);
+
+/*
+ * Does a critical section need to be broken due to another
+ * task waiting?:
+ */
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP)
+# define need_lockbreak(lock) ((lock)->break_lock)
+#else
+# define need_lockbreak(lock) 0
+#endif
+
+/*
+ * Does a critical section need to be broken due to another
+ * task waiting or preemption being signalled:
+ */
+static inline int lock_need_resched(spinlock_t *lock)
+{
+	if (need_lockbreak(lock) || need_resched())
+		return 1;
+	return 0;
+}
+
+/* Reevaluate whether the task has signals pending delivery.
+   This is required every time the blocked sigset_t changes.
+   callers must hold sighand->siglock.  */
+
+extern FASTCALL(void recalc_sigpending_tsk(struct task_struct *t));
+extern void recalc_sigpending(void);
+
+extern void signal_wake_up(struct task_struct *t, int resume_stopped);
+
+/*
+ * Wrappers for p->thread_info->cpu access. No-op on UP.
+ */
+#ifdef CONFIG_SMP
+
+static inline unsigned int task_cpu(const struct task_struct *p)
+{
+	return p->thread_info->cpu;
+}
+
+static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
+{
+	p->thread_info->cpu = cpu;
+}
+
+#else
+
+static inline unsigned int task_cpu(const struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
+{
+}
+
+#endif /* CONFIG_SMP */
+
+#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	mm->mmap_base = TASK_UNMAPPED_BASE;
+	mm->get_unmapped_area = arch_get_unmapped_area;
+	mm->unmap_area = arch_unmap_area;
+}
+#endif
+
+extern long sched_setaffinity(pid_t pid, cpumask_t new_mask);
+extern long sched_getaffinity(pid_t pid, cpumask_t *mask);
+
+#ifdef CONFIG_MAGIC_SYSRQ
+
+extern void normalize_rt_tasks(void);
+
+#endif
+
+/* try_to_freeze
+ *
+ * Checks whether we need to enter the refrigerator
+ * and returns 1 if we did so.
+ */
+#ifdef CONFIG_PM
+extern void refrigerator(unsigned long);
+extern int freeze_processes(void);
+extern void thaw_processes(void);
+
+static inline int try_to_freeze(unsigned long refrigerator_flags)
+{
+	if (unlikely(current->flags & PF_FREEZE)) {
+		refrigerator(refrigerator_flags);
+		return 1;
+	} else
+		return 0;
+}
+#else
+static inline void refrigerator(unsigned long flag) {}
+static inline int freeze_processes(void) { BUG(); return 0; }
+static inline void thaw_processes(void) {}
+
+static inline int try_to_freeze(unsigned long refrigerator_flags)
+{
+	return 0;
+}
+#endif /* CONFIG_PM */
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
new file mode 100644
index 000000000000..6ec66dec29f7
--- /dev/null
+++ b/include/linux/sctp.h
@@ -0,0 +1,594 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * Various protocol defined structures.
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developerst@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson <karl@athena.chicago.il.us>
+ *    Jon Grimm <jgrimm@us.ibm.com>
+ *    Xingang Guo <xingang.guo@intel.com>
+ *    randall@sctp.chicago.il.us
+ *    kmorneau@cisco.com
+ *    qxie1@email.mot.com
+ *    Sridhar Samudrala <sri@us.ibm.com>
+ *    Kevin Gao <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+#ifndef __LINUX_SCTP_H__
+#define __LINUX_SCTP_H__
+
+#include <linux/in.h>		/* We need in_addr.  */
+#include <linux/in6.h>		/* We need in6_addr.  */
+
+
+/* Section 3.1.  SCTP Common Header Format */
+typedef struct sctphdr {
+	__u16 source;
+	__u16 dest;
+	__u32 vtag;
+	__u32 checksum;
+} __attribute__((packed)) sctp_sctphdr_t;
+
+/* Section 3.2.  Chunk Field Descriptions. */
+typedef struct sctp_chunkhdr {
+	__u8 type;
+	__u8 flags;
+	__u16 length;
+} __attribute__((packed)) sctp_chunkhdr_t;
+
+
+/* Section 3.2.  Chunk Type Values.
+ * [Chunk Type] identifies the type of information contained in the Chunk
+ * Value field. It takes a value from 0 to 254. The value of 255 is
+ * reserved for future use as an extension field.
+ */
+typedef enum {
+	SCTP_CID_DATA			= 0,
+        SCTP_CID_INIT			= 1,
+        SCTP_CID_INIT_ACK		= 2,
+        SCTP_CID_SACK			= 3,
+        SCTP_CID_HEARTBEAT		= 4,
+        SCTP_CID_HEARTBEAT_ACK		= 5,
+        SCTP_CID_ABORT			= 6,
+        SCTP_CID_SHUTDOWN		= 7,
+        SCTP_CID_SHUTDOWN_ACK		= 8,
+        SCTP_CID_ERROR			= 9,
+        SCTP_CID_COOKIE_ECHO		= 10,
+        SCTP_CID_COOKIE_ACK	        = 11,
+        SCTP_CID_ECN_ECNE		= 12,
+        SCTP_CID_ECN_CWR		= 13,
+        SCTP_CID_SHUTDOWN_COMPLETE	= 14,
+
+	/* PR-SCTP Sec 3.2 */
+	SCTP_CID_FWD_TSN		= 0xC0,
+
+	/* Use hex, as defined in ADDIP sec. 3.1 */
+	SCTP_CID_ASCONF			= 0xC1,
+	SCTP_CID_ASCONF_ACK		= 0x80,
+} sctp_cid_t; /* enum */
+
+
+/* Section 3.2
+ *  Chunk Types are encoded such that the highest-order two bits specify
+ *  the action that must be taken if the processing endpoint does not
+ *  recognize the Chunk Type.
+ */
+typedef enum {
+	SCTP_CID_ACTION_DISCARD     = 0x00,
+	SCTP_CID_ACTION_DISCARD_ERR = 0x40,
+	SCTP_CID_ACTION_SKIP        = 0x80,
+	SCTP_CID_ACTION_SKIP_ERR    = 0xc0,
+} sctp_cid_action_t;
+
+enum { SCTP_CID_ACTION_MASK = 0xc0, };
+
+/* This flag is used in Chunk Flags for ABORT and SHUTDOWN COMPLETE.
+ *
+ * 3.3.7 Abort Association (ABORT) (6):
+ *    The T bit is set to 0 if the sender had a TCB that it destroyed.
+ *    If the sender did not have a TCB it should set this bit to 1.
+ */
+enum { SCTP_CHUNK_FLAG_T = 0x01 };
+
+/*
+ *  Set the T bit
+ *
+ *      0                   1                   2                   3
+ *      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *     |   Type = 14   |Reserved     |T|      Length = 4               |
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Chunk Flags: 8 bits
+ *
+ *   Reserved:  7 bits
+ *     Set to 0 on transmit and ignored on receipt.
+ *
+ *   T bit:  1 bit
+ *     The T bit is set to 0 if the sender had a TCB that it destroyed. If
+ *     the sender did NOT have a TCB it should set this bit to 1.
+ *
+ * Note: Special rules apply to this chunk for verification, please
+ * see Section 8.5.1 for details.
+ */
+
+#define sctp_test_T_bit(c)    ((c)->chunk_hdr->flags & SCTP_CHUNK_FLAG_T)
+
+/* RFC 2960
+ * Section 3.2.1 Optional/Variable-length Parmaeter Format.
+ */
+
+typedef struct sctp_paramhdr {
+	__u16 type;
+	__u16 length;
+} __attribute__((packed)) sctp_paramhdr_t;
+
+typedef enum {
+
+	/* RFC 2960 Section 3.3.5 */
+	SCTP_PARAM_HEARTBEAT_INFO		= __constant_htons(1),
+	/* RFC 2960 Section 3.3.2.1 */
+	SCTP_PARAM_IPV4_ADDRESS			= __constant_htons(5),
+	SCTP_PARAM_IPV6_ADDRESS			= __constant_htons(6),
+	SCTP_PARAM_STATE_COOKIE			= __constant_htons(7),
+	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= __constant_htons(8),
+	SCTP_PARAM_COOKIE_PRESERVATIVE		= __constant_htons(9),
+	SCTP_PARAM_HOST_NAME_ADDRESS		= __constant_htons(11),
+	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= __constant_htons(12),
+	SCTP_PARAM_ECN_CAPABLE			= __constant_htons(0x8000),
+
+	/* PR-SCTP Sec 3.1 */
+	SCTP_PARAM_FWD_TSN_SUPPORT	= __constant_htons(0xc000),
+
+	/* Add-IP Extension. Section 3.2 */
+	SCTP_PARAM_ADD_IP		= __constant_htons(0xc001),
+	SCTP_PARAM_DEL_IP		= __constant_htons(0xc002),
+	SCTP_PARAM_ERR_CAUSE		= __constant_htons(0xc003),
+	SCTP_PARAM_SET_PRIMARY		= __constant_htons(0xc004),
+	SCTP_PARAM_SUCCESS_REPORT	= __constant_htons(0xc005),
+	SCTP_PARAM_ADAPTION_LAYER_IND   = __constant_htons(0xc006),
+
+} sctp_param_t; /* enum */
+
+
+/* RFC 2960 Section 3.2.1
+ *  The Parameter Types are encoded such that the highest-order two bits
+ *  specify the action that must be taken if the processing endpoint does
+ *  not recognize the Parameter Type.
+ *
+ */
+typedef enum {
+	SCTP_PARAM_ACTION_DISCARD     = __constant_htons(0x0000),
+	SCTP_PARAM_ACTION_DISCARD_ERR = __constant_htons(0x4000),
+	SCTP_PARAM_ACTION_SKIP        = __constant_htons(0x8000),
+	SCTP_PARAM_ACTION_SKIP_ERR    = __constant_htons(0xc000),
+} sctp_param_action_t;
+
+enum { SCTP_PARAM_ACTION_MASK = __constant_htons(0xc000), };
+
+/* RFC 2960 Section 3.3.1 Payload Data (DATA) (0) */
+
+typedef struct sctp_datahdr {
+	__u32 tsn;
+	__u16 stream;
+	__u16 ssn;
+	__u32 ppid;
+	__u8  payload[0];
+} __attribute__((packed)) sctp_datahdr_t;
+
+typedef struct sctp_data_chunk {
+        sctp_chunkhdr_t chunk_hdr;
+        sctp_datahdr_t  data_hdr;
+} __attribute__((packed)) sctp_data_chunk_t;
+
+/* DATA Chuck Specific Flags */
+enum {
+	SCTP_DATA_MIDDLE_FRAG	= 0x00,
+	SCTP_DATA_LAST_FRAG	= 0x01,
+	SCTP_DATA_FIRST_FRAG	= 0x02,
+	SCTP_DATA_NOT_FRAG	= 0x03,
+	SCTP_DATA_UNORDERED	= 0x04,
+};
+enum { SCTP_DATA_FRAG_MASK = 0x03, };
+
+
+/* RFC 2960 Section 3.3.2 Initiation (INIT) (1)
+ *
+ *  This chunk is used to initiate a SCTP association between two
+ *  endpoints.
+ */
+typedef struct sctp_inithdr {
+	__u32 init_tag;
+	__u32 a_rwnd;
+	__u16 num_outbound_streams;
+	__u16 num_inbound_streams;
+	__u32 initial_tsn;
+	__u8  params[0];
+} __attribute__((packed)) sctp_inithdr_t;
+
+typedef struct sctp_init_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_inithdr_t init_hdr;
+} __attribute__((packed)) sctp_init_chunk_t;
+
+
+/* Section 3.3.2.1. IPv4 Address Parameter (5) */
+typedef struct sctp_ipv4addr_param {
+	sctp_paramhdr_t param_hdr;
+	struct in_addr  addr;
+} __attribute__((packed)) sctp_ipv4addr_param_t;
+
+/* Section 3.3.2.1. IPv6 Address Parameter (6) */
+typedef struct sctp_ipv6addr_param {
+	sctp_paramhdr_t param_hdr;
+	struct in6_addr addr;
+} __attribute__((packed)) sctp_ipv6addr_param_t;
+
+/* Section 3.3.2.1 Cookie Preservative (9) */
+typedef struct sctp_cookie_preserve_param {
+	sctp_paramhdr_t param_hdr;
+	uint32_t        lifespan_increment;
+} __attribute__((packed)) sctp_cookie_preserve_param_t;
+
+/* Section 3.3.2.1 Host Name Address (11) */
+typedef struct sctp_hostname_param {
+	sctp_paramhdr_t param_hdr;
+	uint8_t hostname[0];
+} __attribute__((packed)) sctp_hostname_param_t;
+
+/* Section 3.3.2.1 Supported Address Types (12) */
+typedef struct sctp_supported_addrs_param {
+	sctp_paramhdr_t param_hdr;
+	uint16_t types[0];
+} __attribute__((packed)) sctp_supported_addrs_param_t;
+
+/* Appendix A. ECN Capable (32768) */
+typedef struct sctp_ecn_capable_param {
+	sctp_paramhdr_t param_hdr;
+} __attribute__((packed)) sctp_ecn_capable_param_t;
+
+/* ADDIP Section 3.2.6 Adaption Layer Indication */
+typedef struct sctp_adaption_ind_param {
+	struct sctp_paramhdr param_hdr;
+	__u32 adaption_ind;
+} __attribute__((packed)) sctp_adaption_ind_param_t;
+
+/* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
+ *   The INIT ACK chunk is used to acknowledge the initiation of an SCTP
+ *   association.
+ */
+typedef sctp_init_chunk_t sctp_initack_chunk_t;
+
+/* Section 3.3.3.1 State Cookie (7) */
+typedef struct sctp_cookie_param {
+	sctp_paramhdr_t p;
+	__u8 body[0];
+} __attribute__((packed)) sctp_cookie_param_t;
+
+/* Section 3.3.3.1 Unrecognized Parameters (8) */
+typedef struct sctp_unrecognized_param {
+	sctp_paramhdr_t param_hdr;
+	sctp_paramhdr_t unrecognized;
+} __attribute__((packed)) sctp_unrecognized_param_t;
+
+
+
+/*
+ * 3.3.4 Selective Acknowledgement (SACK) (3):
+ *
+ *  This chunk is sent to the peer endpoint to acknowledge received DATA
+ *  chunks and to inform the peer endpoint of gaps in the received
+ *  subsequences of DATA chunks as represented by their TSNs.
+ */
+
+typedef struct sctp_gap_ack_block {
+	__u16 start;
+	__u16 end;
+} __attribute__((packed)) sctp_gap_ack_block_t;
+
+typedef uint32_t sctp_dup_tsn_t;
+
+typedef union {
+	sctp_gap_ack_block_t	gab;
+        sctp_dup_tsn_t		dup;
+} sctp_sack_variable_t;
+
+typedef struct sctp_sackhdr {
+	__u32 cum_tsn_ack;
+	__u32 a_rwnd;
+	__u16 num_gap_ack_blocks;
+	__u16 num_dup_tsns;
+	sctp_sack_variable_t variable[0];
+} __attribute__((packed)) sctp_sackhdr_t;
+
+typedef struct sctp_sack_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_sackhdr_t sack_hdr;
+} __attribute__((packed)) sctp_sack_chunk_t;
+
+
+/* RFC 2960.  Section 3.3.5 Heartbeat Request (HEARTBEAT) (4):
+ *
+ *  An endpoint should send this chunk to its peer endpoint to probe the
+ *  reachability of a particular destination transport address defined in
+ *  the present association.
+ */
+
+typedef struct sctp_heartbeathdr {
+	sctp_paramhdr_t info;
+} __attribute__((packed)) sctp_heartbeathdr_t;
+
+typedef struct sctp_heartbeat_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_heartbeathdr_t hb_hdr;
+} __attribute__((packed)) sctp_heartbeat_chunk_t;
+
+
+/* For the abort and shutdown ACK we must carry the init tag in the
+ * common header. Just the common header is all that is needed with a
+ * chunk descriptor.
+ */
+typedef struct sctp_abort_chunk {
+        sctp_chunkhdr_t uh;
+} __attribute__((packed)) sctp_abort_chunk_t;
+
+
+/* For the graceful shutdown we must carry the tag (in common header)
+ * and the highest consecutive acking value.
+ */
+typedef struct sctp_shutdownhdr {
+	__u32 cum_tsn_ack;
+} __attribute__((packed)) sctp_shutdownhdr_t;
+
+struct sctp_shutdown_chunk_t {
+        sctp_chunkhdr_t    chunk_hdr;
+        sctp_shutdownhdr_t shutdown_hdr;
+} __attribute__ ((packed));
+
+/* RFC 2960.  Section 3.3.10 Operation Error (ERROR) (9) */
+
+typedef struct sctp_errhdr {
+	__u16 cause;
+	__u16 length;
+	__u8  variable[0];
+} __attribute__((packed)) sctp_errhdr_t;
+
+typedef struct sctp_operr_chunk {
+        sctp_chunkhdr_t chunk_hdr;
+	sctp_errhdr_t   err_hdr;
+} __attribute__((packed)) sctp_operr_chunk_t;
+
+/* RFC 2960 3.3.10 - Operation Error
+ *
+ * Cause Code: 16 bits (unsigned integer)
+ *
+ *     Defines the type of error conditions being reported.
+ *    Cause Code
+ *     Value           Cause Code
+ *     ---------      ----------------
+ *      1              Invalid Stream Identifier
+ *      2              Missing Mandatory Parameter
+ *      3              Stale Cookie Error
+ *      4              Out of Resource
+ *      5              Unresolvable Address
+ *      6              Unrecognized Chunk Type
+ *      7              Invalid Mandatory Parameter
+ *      8              Unrecognized Parameters
+ *      9              No User Data
+ *     10              Cookie Received While Shutting Down
+ */
+typedef enum {
+
+	SCTP_ERROR_NO_ERROR	   = __constant_htons(0x00),
+	SCTP_ERROR_INV_STRM	   = __constant_htons(0x01),
+	SCTP_ERROR_MISS_PARAM 	   = __constant_htons(0x02),
+	SCTP_ERROR_STALE_COOKIE	   = __constant_htons(0x03),
+	SCTP_ERROR_NO_RESOURCE 	   = __constant_htons(0x04),
+	SCTP_ERROR_DNS_FAILED      = __constant_htons(0x05),
+	SCTP_ERROR_UNKNOWN_CHUNK   = __constant_htons(0x06),
+	SCTP_ERROR_INV_PARAM       = __constant_htons(0x07),
+	SCTP_ERROR_UNKNOWN_PARAM   = __constant_htons(0x08),
+	SCTP_ERROR_NO_DATA         = __constant_htons(0x09),
+	SCTP_ERROR_COOKIE_IN_SHUTDOWN = __constant_htons(0x0a),
+
+
+	/* SCTP Implementation Guide:
+	 *  11  Restart of an association with new addresses
+	 *  12  User Initiated Abort
+	 *  13  Protocol Violation
+	 */
+
+	SCTP_ERROR_RESTART         = __constant_htons(0x0b),
+	SCTP_ERROR_USER_ABORT      = __constant_htons(0x0c),
+	SCTP_ERROR_PROTO_VIOLATION = __constant_htons(0x0d),
+
+	/* ADDIP Section 3.3  New Error Causes
+	 *
+	 * Four new Error Causes are added to the SCTP Operational Errors,
+	 * primarily for use in the ASCONF-ACK chunk.
+	 *
+	 * Value          Cause Code
+	 * ---------      ----------------
+	 * 0x0100          Request to Delete Last Remaining IP Address.
+	 * 0x0101          Operation Refused Due to Resource Shortage.
+	 * 0x0102          Request to Delete Source IP Address.
+	 * 0x0103          Association Aborted due to illegal ASCONF-ACK
+	 * 0x0104          Request refused - no authorization.
+	 */
+	SCTP_ERROR_DEL_LAST_IP	= __constant_htons(0x0100),
+	SCTP_ERROR_RSRC_LOW	= __constant_htons(0x0101),
+	SCTP_ERROR_DEL_SRC_IP	= __constant_htons(0x0102),
+	SCTP_ERROR_ASCONF_ACK   = __constant_htons(0x0103),
+	SCTP_ERROR_REQ_REFUSED	= __constant_htons(0x0104)
+} sctp_error_t;
+
+
+
+/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
+ *   Explicit Congestion Notification Echo (ECNE) (12)
+ */
+typedef struct sctp_ecnehdr {
+	__u32 lowest_tsn;
+} sctp_ecnehdr_t;
+
+typedef struct sctp_ecne_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_ecnehdr_t ence_hdr;
+} __attribute__((packed)) sctp_ecne_chunk_t;
+
+/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
+ *   Congestion Window Reduced (CWR) (13)
+ */
+typedef struct sctp_cwrhdr {
+	__u32 lowest_tsn;
+} sctp_cwrhdr_t;
+
+typedef struct sctp_cwr_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_cwrhdr_t cwr_hdr;
+} __attribute__((packed)) sctp_cwr_chunk_t;
+
+/* PR-SCTP
+ * 3.2 Forward Cumulative TSN Chunk Definition (FORWARD TSN)
+ *
+ * Forward Cumulative TSN chunk has the following format:
+ *
+ *        0                   1                   2                   3
+ *        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |   Type = 192  |  Flags = 0x00 |        Length = Variable      |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |                      New Cumulative TSN                       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |         Stream-1              |       Stream Sequence-1       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      \                                                               /
+ *      /                                                               \
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |         Stream-N              |       Stream Sequence-N       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *      Chunk Flags:
+ *
+ *        Set to all zeros on transmit and ignored on receipt.
+ *
+ *      New Cumulative TSN: 32 bit u_int
+ *
+ *       This indicates the new cumulative TSN to the data receiver. Upon
+ *       the reception of this value, the data receiver MUST consider
+ *       any missing TSNs earlier than or equal to this value as received
+ *       and stop reporting them as gaps in any subsequent SACKs.
+ *
+ *      Stream-N: 16 bit u_int
+ *
+ *       This field holds a stream number that was skipped by this
+ *       FWD-TSN.
+ *
+ *      Stream Sequence-N: 16 bit u_int
+ *       This field holds the sequence number associated with the stream
+ *       that was skipped. The stream sequence field holds the largest stream
+ *       sequence number in this stream being skipped.  The receiver of
+ *       the FWD-TSN's can use the Stream-N and Stream Sequence-N fields
+ *       to enable delivery of any stranded TSN's that remain on the stream
+ *       re-ordering queues. This field MUST NOT report TSN's corresponding
+ *       to DATA chunk that are marked as unordered. For ordered DATA
+ *       chunks this field MUST be filled in.
+ */
+struct sctp_fwdtsn_skip {
+	__u16 stream;
+	__u16 ssn;
+} __attribute__((packed));
+
+struct sctp_fwdtsn_hdr {
+	__u32 new_cum_tsn;
+	struct sctp_fwdtsn_skip skip[0];
+} __attribute((packed));
+
+struct sctp_fwdtsn_chunk {
+	struct sctp_chunkhdr chunk_hdr;
+	struct sctp_fwdtsn_hdr fwdtsn_hdr;
+} __attribute((packed));
+
+
+/* ADDIP
+ * Section 3.1.1 Address Configuration Change Chunk (ASCONF)
+ *
+ * 	Serial Number: 32 bits (unsigned integer)
+ *	This value represents a Serial Number for the ASCONF Chunk. The
+ *	valid range of Serial Number is from 0 to 2^32-1.
+ *	Serial Numbers wrap back to 0 after reaching 2^32 -1.
+ *
+ *	Address Parameter: 8 or 20 bytes (depending on type)
+ *	The address is an address of the sender of the ASCONF chunk,
+ *	the address MUST be considered part of the association by the
+ *	peer endpoint. This field may be used by the receiver of the 
+ *	ASCONF to help in finding the association. This parameter MUST
+ *	be present in every ASCONF message i.e. it is a mandatory TLV
+ *	parameter.
+ *
+ *	ASCONF Parameter: TLV format
+ *	Each Address configuration change is represented by a TLV
+ *	parameter as defined in Section 3.2. One or more requests may
+ *	be present in an ASCONF Chunk.
+ *
+ * Section 3.1.2 Address Configuration Acknowledgement Chunk (ASCONF-ACK)
+ * 
+ *	Serial Number: 32 bits (unsigned integer)
+ *	This value represents the Serial Number for the received ASCONF
+ *	Chunk that is acknowledged by this chunk. This value is copied
+ *	from the received ASCONF Chunk. 
+ *
+ *	ASCONF Parameter Response: TLV format
+ *	The ASCONF Parameter Response is used in the ASCONF-ACK to
+ *	report status of ASCONF processing.
+ */
+typedef struct sctp_addip_param {
+	sctp_paramhdr_t	param_hdr;
+	__u32		crr_id;	
+} __attribute__((packed)) sctp_addip_param_t;
+
+typedef struct sctp_addiphdr {
+	__u32	serial;
+	__u8	params[0];
+} __attribute__((packed)) sctp_addiphdr_t;
+
+typedef struct sctp_addip_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_addiphdr_t addip_hdr;
+} __attribute__((packed)) sctp_addip_chunk_t;
+
+#endif /* __LINUX_SCTP_H__ */
diff --git a/include/linux/scx200.h b/include/linux/scx200.h
new file mode 100644
index 000000000000..a22f9e173ad2
--- /dev/null
+++ b/include/linux/scx200.h
@@ -0,0 +1,58 @@
+/* linux/include/linux/scx200.h
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   Defines for the National Semiconductor SCx200 Processors
+*/
+
+/* Interesting stuff for the National Semiconductor SCx200 CPU */
+
+extern unsigned scx200_cb_base;
+
+#define scx200_cb_present() (scx200_cb_base!=0)
+
+/* F0 PCI Header/Bridge Configuration Registers */
+#define SCx200_DOCCS_BASE 0x78	/* DOCCS Base Address Register */
+#define SCx200_DOCCS_CTRL 0x7c	/* DOCCS Control Register */
+
+/* GPIO Register Block */
+#define SCx200_GPIO_SIZE 0x2c	/* Size of GPIO register block */
+
+/* General Configuration Block */
+#define SCx200_CB_BASE_FIXED 0x9000	/* Base fixed at 0x9000 according to errata? */
+
+/* Watchdog Timer */
+#define SCx200_WDT_OFFSET 0x00	/* offset within configuration block */
+#define SCx200_WDT_SIZE 0x05	/* size */
+
+#define SCx200_WDT_WDTO 0x00	/* Time-Out Register */
+#define SCx200_WDT_WDCNFG 0x02	/* Configuration Register */
+#define SCx200_WDT_WDSTS 0x04	/* Status Register */
+#define SCx200_WDT_WDSTS_WDOVF (1<<0) /* Overflow bit */
+
+/* High Resolution Timer */
+#define SCx200_TIMER_OFFSET 0x08
+#define SCx200_TIMER_SIZE 0x05
+
+/* Clock Generators */
+#define SCx200_CLOCKGEN_OFFSET 0x10
+#define SCx200_CLOCKGEN_SIZE 0x10
+
+/* Pin Multiplexing and Miscellaneous Configuration Registers */
+#define SCx200_MISC_OFFSET 0x30
+#define SCx200_MISC_SIZE 0x10
+
+#define SCx200_PMR 0x30		/* Pin Multiplexing Register */
+#define SCx200_MCR 0x34		/* Miscellaneous Configuration Register */
+#define SCx200_INTSEL 0x38	/* Interrupt Selection Register */
+#define SCx200_IID 0x3c		/* IA On a Chip Identification Number Reg */
+#define SCx200_REV 0x3d		/* Revision Register */
+#define SCx200_CBA 0x3e		/* Configuration Base Address Register */
+#define SCx200_CBA_SCRATCH 0x64	/* Configuration Base Address Scratchpad */
+
+/*
+    Local variables:
+        compile-command: "make -C ../.. bzImage modules"
+        c-basic-offset: 8
+    End:
+*/
diff --git a/include/linux/scx200_gpio.h b/include/linux/scx200_gpio.h
new file mode 100644
index 000000000000..30cdd648ba79
--- /dev/null
+++ b/include/linux/scx200_gpio.h
@@ -0,0 +1,96 @@
+#include <linux/spinlock.h>
+
+u32 scx200_gpio_configure(int index, u32 set, u32 clear);
+
+extern unsigned scx200_gpio_base;
+extern long scx200_gpio_shadow[2];
+
+#define scx200_gpio_present() (scx200_gpio_base!=0)
+
+/* Definitions to make sure I do the same thing in all functions */
+#define __SCx200_GPIO_BANK unsigned bank = index>>5
+#define __SCx200_GPIO_IOADDR unsigned short ioaddr = scx200_gpio_base+0x10*bank
+#define __SCx200_GPIO_SHADOW long *shadow = scx200_gpio_shadow+bank
+#define __SCx200_GPIO_INDEX index &= 31
+
+#define __SCx200_GPIO_OUT __asm__ __volatile__("outsl":"=mS" (shadow):"d" (ioaddr), "0" (shadow))
+
+/* returns the value of the GPIO pin */
+
+static inline int scx200_gpio_get(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR + 0x04;
+	__SCx200_GPIO_INDEX;
+		
+	return (inl(ioaddr) & (1<<index)) ? 1 : 0;
+}
+
+/* return the value driven on the GPIO signal (the value that will be
+   driven if the GPIO is configured as an output, it might not be the
+   state of the GPIO right now if the GPIO is configured as an input) */
+
+static inline int scx200_gpio_current(int index) {
+        __SCx200_GPIO_BANK;
+	__SCx200_GPIO_INDEX;
+		
+	return (scx200_gpio_shadow[bank] & (1<<index)) ? 1 : 0;
+}
+
+/* drive the GPIO signal high */
+
+static inline void scx200_gpio_set_high(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	set_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal low */
+
+static inline void scx200_gpio_set_low(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	clear_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal to state */
+
+static inline void scx200_gpio_set(int index, int state) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	if (state)
+		set_bit(index, shadow);
+	else
+		clear_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* toggle the GPIO signal */
+static inline void scx200_gpio_change(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	change_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+#undef __SCx200_GPIO_BANK
+#undef __SCx200_GPIO_IOADDR
+#undef __SCx200_GPIO_SHADOW
+#undef __SCx200_GPIO_INDEX
+#undef __SCx200_GPIO_OUT
+
+/*
+    Local variables:
+        compile-command: "make -C ../.. bzImage modules"
+        c-basic-offset: 8
+    End:
+*/
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
new file mode 100644
index 000000000000..3b6afb8caa42
--- /dev/null
+++ b/include/linux/sdla.h
@@ -0,0 +1,339 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	Structure packing
+ *
+ *		0.20	Mike McLagan	New flags for S508 buffer handling
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef SDLA_H
+#define SDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void __user *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+#define SDLA_WINDOW_SIZE		0x2000
+#define SDLA_ADDR_MASK			0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+#ifndef __KERNEL__
+
+void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet);
+
+#else
+
+/* important Z80 window addresses */
+#define SDLA_CONTROL_WND		0xE000
+
+#define SDLA_502_CMD_BUF		0xEF60
+#define SDLA_502_RCV_BUF		0xA900
+#define	SDLA_502_TXN_AVAIL		0xFFF1
+#define SDLA_502_RCV_AVAIL		0xFFF2
+#define SDLA_502_EVENT_FLAGS		0xFFF3
+#define SDLA_502_MDM_STATUS		0xFFF4
+#define SDLA_502_IRQ_INTERFACE		0xFFFD
+#define SDLA_502_IRQ_PERMISSION		0xFFFE
+#define SDLA_502_DATA_OFS		0x0010
+
+#define SDLA_508_CMD_BUF		0xE000
+#define SDLA_508_TXBUF_INFO		0xF100
+#define SDLA_508_RXBUF_INFO		0xF120
+#define SDLA_508_EVENT_FLAGS		0xF003
+#define SDLA_508_MDM_STATUS		0xF004
+#define SDLA_508_IRQ_INTERFACE		0xF010
+#define SDLA_508_IRQ_PERMISSION		0xF011
+#define SDLA_508_TSE_OFFSET		0xF012
+
+/* Event flags */
+#define SDLA_EVENT_STATUS		0x01
+#define SDLA_EVENT_DLCI_STATUS		0x02
+#define SDLA_EVENT_BAD_DLCI		0x04
+#define SDLA_EVENT_LINK_DOWN		0x40
+
+/* IRQ Trigger flags */
+#define SDLA_INTR_RX			0x01
+#define SDLA_INTR_TX			0x02
+#define SDLA_INTR_MODEM			0x04
+#define SDLA_INTR_COMPLETE		0x08
+#define SDLA_INTR_STATUS		0x10
+#define SDLA_INTR_TIMER			0x20
+
+/* DLCI status bits */
+#define SDLA_DLCI_DELETED		0x01
+#define SDLA_DLCI_ACTIVE		0x02
+#define SDLA_DLCI_WAITING		0x04
+#define SDLA_DLCI_NEW			0x08
+#define SDLA_DLCI_INCLUDED		0x40
+
+/* valid command codes */
+#define	SDLA_INFORMATION_WRITE		0x01
+#define	SDLA_INFORMATION_READ		0x02
+#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
+#define	SDLA_SET_DLCI_CONFIGURATION	0x10
+#define	SDLA_READ_DLCI_CONFIGURATION	0x11
+#define	SDLA_DISABLE_COMMUNICATIONS	0x12
+#define	SDLA_ENABLE_COMMUNICATIONS	0x13
+#define	SDLA_READ_DLC_STATUS		0x14
+#define	SDLA_READ_DLC_STATISTICS	0x15
+#define	SDLA_FLUSH_DLC_STATISTICS	0x16
+#define	SDLA_LIST_ACTIVE_DLCI		0x17
+#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
+#define	SDLA_ADD_DLCI			0x20
+#define	SDLA_DELETE_DLCI		0x21
+#define	SDLA_ACTIVATE_DLCI		0x22
+#define	SDLA_DEACTIVATE_DLCI		0x23
+#define	SDLA_READ_MODEM_STATUS		0x30
+#define	SDLA_SET_MODEM_STATUS		0x31
+#define	SDLA_READ_COMMS_ERR_STATS	0x32
+#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
+#define	SDLA_READ_CODE_VERSION		0x40
+#define SDLA_SET_IRQ_TRIGGER		0x50
+#define SDLA_GET_IRQ_TRIGGER		0x51
+
+/* In channel signal types */
+#define SDLA_ICS_LINK_VERIFY		0x02
+#define SDLA_ICS_STATUS_ENQ		0x03
+
+/* modem status flags */
+#define SDLA_MODEM_DTR_HIGH		0x01
+#define SDLA_MODEM_RTS_HIGH		0x02
+#define SDLA_MODEM_DCD_HIGH		0x08
+#define SDLA_MODEM_CTS_HIGH		0x20
+
+/* used for RET_MODEM interpretation */
+#define SDLA_MODEM_DCD_LOW		0x01
+#define SDLA_MODEM_CTS_LOW		0x02
+
+/* return codes */
+#define SDLA_RET_OK			0x00
+#define SDLA_RET_COMMUNICATIONS		0x01
+#define SDLA_RET_CHANNEL_INACTIVE	0x02
+#define SDLA_RET_DLCI_INACTIVE		0x03
+#define SDLA_RET_DLCI_CONFIG		0x04
+#define SDLA_RET_BUF_TOO_BIG		0x05
+#define SDLA_RET_NO_DATA		0x05
+#define SDLA_RET_BUF_OVERSIZE		0x06
+#define SDLA_RET_CIR_OVERFLOW		0x07
+#define SDLA_RET_NO_BUFS		0x08
+#define SDLA_RET_TIMEOUT		0x0A
+#define SDLA_RET_MODEM			0x10
+#define SDLA_RET_CHANNEL_OFF		0x11
+#define SDLA_RET_CHANNEL_ON		0x12
+#define SDLA_RET_DLCI_STATUS		0x13
+#define SDLA_RET_DLCI_UNKNOWN       	0x14
+#define SDLA_RET_COMMAND_INVALID    	0x1F
+
+/* Configuration flags */
+#define SDLA_DIRECT_RECV		0x0080
+#define SDLA_TX_NO_EXCEPT		0x0020
+#define SDLA_NO_ICF_MSGS		0x1000
+#define SDLA_TX50_RX50			0x0000
+#define SDLA_TX70_RX30			0x2000
+#define SDLA_TX30_RX70			0x4000
+
+/* IRQ selection flags */
+#define SDLA_IRQ_RECEIVE		0x01
+#define SDLA_IRQ_TRANSMIT		0x02
+#define SDLA_IRQ_MODEM_STAT		0x04
+#define SDLA_IRQ_COMMAND		0x08
+#define SDLA_IRQ_CHANNEL		0x10
+#define SDLA_IRQ_TIMER			0x20
+
+/* definitions for PC memory mapping */
+#define SDLA_8K_WINDOW			0x01
+#define SDLA_S502_SEG_A			0x10
+#define SDLA_S502_SEG_C			0x20
+#define SDLA_S502_SEG_D			0x00
+#define SDLA_S502_SEG_E			0x30
+#define SDLA_S507_SEG_A			0x00
+#define SDLA_S507_SEG_B			0x40
+#define SDLA_S507_SEG_C			0x80
+#define SDLA_S507_SEG_E			0xC0
+#define SDLA_S508_SEG_A			0x00
+#define SDLA_S508_SEG_C			0x10
+#define SDLA_S508_SEG_D			0x08
+#define SDLA_S508_SEG_E			0x18
+
+/* SDLA adapter port constants */
+#define SDLA_IO_EXTENTS			0x04
+	
+#define SDLA_REG_CONTROL		0x00
+#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
+#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
+#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
+	
+#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
+#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
+#define SDLA_S508_STS			0x01	/* status reg for 508 */
+#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
+	
+/* control register flags */
+#define SDLA_S502A_START		0x00	/* start the CPU */
+#define SDLA_S502A_INTREQ		0x02
+#define SDLA_S502A_INTEN		0x04
+#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
+#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
+
+#define SDLA_S502E_CPUEN		0x01
+#define SDLA_S502E_ENABLE		0x02
+#define SDLA_S502E_INTACK		0x04
+	
+#define SDLA_S507_ENABLE		0x01
+#define SDLA_S507_IRQ3			0x00
+#define SDLA_S507_IRQ4			0x20
+#define SDLA_S507_IRQ5			0x40
+#define SDLA_S507_IRQ7			0x60
+#define SDLA_S507_IRQ10			0x80
+#define SDLA_S507_IRQ11			0xA0
+#define SDLA_S507_IRQ12			0xC0
+#define SDLA_S507_IRQ15			0xE0
+	
+#define SDLA_HALT			0x00
+#define SDLA_CPUEN			0x02
+#define SDLA_MEMEN			0x04
+#define SDLA_S507_EPROMWR		0x08
+#define SDLA_S507_EPROMCLK		0x10
+#define SDLA_S508_INTRQ			0x08
+#define SDLA_S508_INTEN			0x10
+
+struct sdla_cmd {
+   char  opp_flag		__attribute__((packed));
+   char  cmd			__attribute__((packed));
+   short length			__attribute__((packed));
+   char  retval			__attribute__((packed));
+   short dlci			__attribute__((packed));
+   char  flags			__attribute__((packed));
+   short rxlost_int		__attribute__((packed));
+   long  rxlost_app		__attribute__((packed));
+   char  reserve[2]		__attribute__((packed));
+   char  data[SDLA_MAX_DATA]	__attribute__((packed));	/* transfer data buffer */
+};
+
+struct intr_info {
+   char  flags		__attribute__((packed));
+   short txlen		__attribute__((packed));
+   char  irq		__attribute__((packed));
+   char  flags2		__attribute__((packed));
+   short timeout	__attribute__((packed));
+};
+
+/* found in the 508's control window at RXBUF_INFO */
+struct buf_info {
+   unsigned short rse_num	__attribute__((packed));
+   unsigned long  rse_base	__attribute__((packed));
+   unsigned long  rse_next	__attribute__((packed));
+   unsigned long  buf_base	__attribute__((packed));
+   unsigned short reserved	__attribute__((packed));
+   unsigned long  buf_top	__attribute__((packed));
+};
+
+/* structure pointed to by rse_base in RXBUF_INFO struct */
+struct buf_entry {
+   char  opp_flag	__attribute__((packed));
+   short length		__attribute__((packed));
+   short dlci		__attribute__((packed));
+   char  flags		__attribute__((packed));
+   short timestamp	__attribute__((packed));
+   short reserved[2]	__attribute__((packed));
+   long  buf_addr	__attribute__((packed));
+};
+
+#endif
+
+#endif
diff --git a/include/linux/sdla_asy.h b/include/linux/sdla_asy.h
new file mode 100644
index 000000000000..f62242537c86
--- /dev/null
+++ b/include/linux/sdla_asy.h
@@ -0,0 +1,226 @@
+/*****************************************************************************
+* sdla_asy.h	Header file for the Sangoma S508/S514 asynchronous code API	
+*
+* Author: 	Gideon Hack 	
+*
+* Copyright:	(c) 2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+*
+* Jan 28, 2000	Gideon Hack 	Initial Version
+*
+*****************************************************************************/
+
+
+#ifndef _WANPIPE_ASYNC_H
+#define _WANPIPE_ASYNC_H
+
+/* ----------------------------------------------------------------------------
+ *                        Interface commands
+ * --------------------------------------------------------------------------*/
+
+#define SET_ASY_CONFIGURATION		0xE2	/* set the asychronous operational configuration */
+#define READ_ASY_CONFIGURATION		0xE3	/* read the current asychronous operational configuration */
+#define ENABLE_ASY_COMMUNICATIONS	0xE4	/* enable asychronous communications */
+#define DISABLE_ASY_COMMUNICATIONS	0xE5	/* disable asychronous communications */
+#define READ_ASY_OPERATIONAL_STATS	0xE7	/* retrieve the asychronous operational statistics */
+#define FLUSH_ASY_OPERATIONAL_STATS	0xE8	/* flush the asychronous operational statistics */
+#define TRANSMIT_ASY_BREAK_SIGNAL	0xEC	/* transmit an asychronous break signal */
+
+
+
+/* ----------------------------------------------------------------------------
+ *                     Return codes from interface commands
+ * --------------------------------------------------------------------------*/
+
+#define COMMAND_INVALID_FOR_PORT	0x50	/* the command is invalid for the selected port */
+#define DISABLE_ASY_COMMS_BEFORE_CFG 	0xE1	/* communications must be disabled before setting the configuration */
+#define ASY_COMMS_ENABLED		0xE1	/* communications are currently enabled */
+#define ASY_COMMS_DISABLED		0xE1	/* communications are currently disabled */
+#define ASY_CFG_BEFORE_COMMS_ENABLED	0xE2	/* perform a SET_ASY_CONFIGURATION before enabling comms */
+#define LGTH_ASY_CFG_DATA_INVALID  	0xE2	/* the length of the passed configuration data is invalid */
+#define INVALID_ASY_CFG_DATA		0xE3	/* the passed configuration data is invalid */
+#define ASY_BREAK_SIGNAL_BUSY		0xEC	/* a break signal is being transmitted */
+
+
+
+/* ----------------------------------------------------------------------------
+ *   Constants for the SET_ASY_CONFIGURATION/READ_ASY_CONFIGURATION command
+ * --------------------------------------------------------------------------*/
+
+/* the asynchronous configuration structure */
+typedef struct {
+	unsigned long baud_rate			PACKED;							/* the baud rate */	
+	unsigned short line_config_options	PACKED;	/* line configuration options */
+	unsigned short modem_config_options	PACKED;	/* modem configuration options */
+	unsigned short asy_API_options		PACKED;	/* asynchronous API options */
+	unsigned short asy_protocol_options	PACKED; /* asynchronous protocol options */
+	unsigned short Tx_bits_per_char		PACKED;	/* number of bits per tx character */
+	unsigned short Rx_bits_per_char		PACKED;	/* number of bits per received character */
+	unsigned short stop_bits		PACKED;	/* number of stop bits per character */
+	unsigned short parity			PACKED;	/* parity definition */
+	unsigned short break_timer		PACKED;	/* the break signal timer */
+	unsigned short asy_Rx_inter_char_timer	PACKED;	/* the receive inter-character timer */
+	unsigned short asy_Rx_complete_length	PACKED;	/* the receive 'buffer complete' length */
+	unsigned short XON_char			PACKED;	/* the XON character */
+	unsigned short XOFF_char		PACKED;	/* the XOFF character */
+	unsigned short asy_statistics_options	PACKED;	/* async operational stat options */
+	unsigned long ptr_shared_mem_info_struct    PACKED;/* ptr to the shared memory area information structure */
+	unsigned long ptr_asy_Tx_stat_el_cfg_struct PACKED;/* ptr to the transmit status element configuration structure */
+	unsigned long ptr_asy_Rx_stat_el_cfg_struct PACKED;/* ptr to the receive status element configuration structure */
+} ASY_CONFIGURATION_STRUCT;
+
+/* permitted minimum and maximum values for setting the asynchronous configuration */
+#define MIN_ASY_BAUD_RATE		50	/* maximum baud rate */
+#define MAX_ASY_BAUD_RATE		250000	/* minimum baud rate */
+#define MIN_ASY_BITS_PER_CHAR		5	/* minimum number of bits per character */
+#define MAX_ASY_BITS_PER_CHAR		8	/* maximum number of bits per character */
+#define MIN_BREAK_TMR_VAL		0	/* minimum break signal timer */
+#define MAX_BREAK_TMR_VAL		5000	/* maximum break signal timer */
+#define MIN_ASY_RX_INTER_CHAR_TMR	0	/* minimum receive inter-character timer */
+#define MAX_ASY_RX_INTER_CHAR_TMR	30000	/* maximum receive inter-character timer */
+#define MIN_ASY_RX_CPLT_LENGTH		0	/* minimum receive 'length complete' value */
+#define MAX_ASY_RX_CPLT_LENGTH		2000	/* maximum receive 'length complete' value */
+
+/* bit settings for the 'asy_API_options' */
+#define ASY_RX_DATA_TRANSPARENT		0x0001	/* do not strip parity and unused bits from received characters */
+
+/* bit settings for the 'asy_protocol_options' */
+#define ASY_RTS_HS_FOR_RX		0x0001	/* RTS handshaking is used for reception control */
+#define ASY_XON_XOFF_HS_FOR_RX		0x0002	/* XON/XOFF handshaking is used for reception control */
+#define ASY_XON_XOFF_HS_FOR_TX		0x0004	/* XON/XOFF handshaking is used for transmission control */
+#define ASY_DCD_HS_FOR_TX		0x0008	/* DCD handshaking is used for transmission control */
+#define ASY_CTS_HS_FOR_TX		0x0020	/* CTS handshaking is used for transmission control */
+
+/* bit settings for the 'stop_bits' definition */
+#define ONE_STOP_BIT			1			/* representation for 1 stop bit */
+#define TWO_STOP_BITS			2			/* representation for 2 stop bits */
+#define ONE_AND_A_HALF_STOP_BITS	3			/* representation for 1.5 stop bits */
+
+/* bit settings for the 'parity' definition */
+#define NO_PARITY			0			/* representation for no parity */
+#define ODD_PARITY			1			/* representation for odd parity */
+#define EVEN_PARITY			2			/* representation for even parity */
+
+
+
+/* ----------------------------------------------------------------------------
+ *    Constants for the READ_COMMS_ERROR_STATS command (asynchronous mode)
+ * --------------------------------------------------------------------------*/
+
+/* the communications error statistics structure */
+typedef struct {
+	unsigned short Rx_overrun_err_count   	PACKED;	/* receiver overrun error count */
+	unsigned short Rx_parity_err_count	PACKED;	/* parity errors received count */
+	unsigned short Rx_framing_err_count	PACKED;	/* framing errors received count */
+	unsigned short comms_err_stat_reserved_1 PACKED;/* reserved for later use */
+	unsigned short comms_err_stat_reserved_2 PACKED;/* reserved for later use */
+	unsigned short comms_err_stat_reserved_3 PACKED;/* reserved for later use */
+	unsigned short comms_err_stat_reserved_4 PACKED;/* reserved for later use */
+	unsigned short comms_err_stat_reserved_5 PACKED;/* reserved for later use */
+	unsigned short DCD_state_change_count 	PACKED;	/* DCD state change count */
+	unsigned short CTS_state_change_count	PACKED;	/* CTS state change count */
+} ASY_COMMS_ERROR_STATS_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *         Constants for the READ_ASY_OPERATIONAL_STATS command
+ * --------------------------------------------------------------------------*/
+
+/* the asynchronous operational statistics structure */
+typedef struct {
+
+	/* Data transmission statistics */
+	unsigned long Data_blocks_Tx_count PACKED;/* number of blocks transmitted */
+	unsigned long Data_bytes_Tx_count  PACKED;/* number of bytes transmitted */
+	unsigned long Data_Tx_throughput   PACKED;/* transmit throughput */
+	unsigned long no_ms_for_Data_Tx_thruput_comp PACKED;/* millisecond time used for the Tx throughput computation */
+	unsigned long Tx_Data_discard_lgth_err_count PACKED;/* number of Data blocks discarded (length error) */
+	unsigned long reserved_Data_frm_Tx_stat1 PACKED;/* reserved for later use */
+	unsigned long reserved_Data_frm_Tx_stat2 PACKED;/* reserved for later use */
+	unsigned long reserved_Data_frm_Tx_stat3 PACKED;/* reserved for later use */
+
+	/* Data reception statistics */
+	unsigned long Data_blocks_Rx_count PACKED;/* number of blocks received */
+	unsigned long Data_bytes_Rx_count  PACKED;/* number of bytes received */
+	unsigned long Data_Rx_throughput   PACKED;/* receive throughput */
+	unsigned long no_ms_for_Data_Rx_thruput_comp PACKED;/* millisecond time used for the Rx throughput computation */
+	unsigned long Rx_Data_bytes_discard_count    PACKED;/* received Data bytes discarded */
+	unsigned long reserved_Data_frm_Rx_stat1     PACKED;/* reserved for later use */
+
+	/* handshaking protocol statistics */
+	unsigned short XON_chars_Tx_count	PACKED;	/* number of XON characters transmitted */
+	unsigned short XOFF_chars_Tx_count	PACKED;	/* number of XOFF characters transmitted */
+	unsigned short XON_chars_Rx_count	PACKED;	/* number of XON characters received */
+	unsigned short XOFF_chars_Rx_count	PACKED;	/* number of XOFF characters received */
+	unsigned short Tx_halt_modem_low_count	PACKED; /* number of times Tx halted (modem line low) */
+	unsigned short Rx_halt_RTS_low_count	PACKED;	/* number of times Rx halted by setting RTS low */
+	unsigned long reserved_handshaking_stat1 PACKED;/* reserved for later use */
+
+	/* break statistics */
+	unsigned short break_Tx_count	PACKED;	/* number of break sequences transmitted */
+	unsigned short break_Rx_count	PACKED;	/* number of break sequences received */
+	unsigned long reserved_break_stat1 PACKED;/* reserved for later use */
+
+	/* miscellaneous statistics */
+	unsigned long reserved_misc_stat1	PACKED;	/* reserved for later use */
+	unsigned long reserved_misc_stat2	PACKED;	/* reserved for later use */
+
+} ASY_OPERATIONAL_STATS_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *                      Constants for Data transmission
+ * --------------------------------------------------------------------------*/
+
+/* the Data block transmit status element configuration structure */
+typedef struct {
+	unsigned short number_Tx_status_elements PACKED;		/* number of transmit status elements */
+	unsigned long base_addr_Tx_status_elements PACKED;	/* base address of the transmit element list */
+	unsigned long next_Tx_status_element_to_use PACKED;	/* pointer to the next transmit element to be used */
+} ASY_TX_STATUS_EL_CFG_STRUCT;
+
+
+/* the Data block transmit status element structure */
+typedef struct {
+	unsigned char opp_flag PACKED;								/* opp flag */
+	unsigned short data_length PACKED;						/* length of the block to be transmitted */
+	unsigned char reserved_1 PACKED;							/* reserved for internal use */
+	unsigned long reserved_2 PACKED;							/* reserved for internal use */
+	unsigned long reserved_3 PACKED;							/* reserved for internal use */
+	unsigned long ptr_data_bfr PACKED;						/* pointer to the data area */
+} ASY_DATA_TX_STATUS_EL_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *                      Constants for Data reception
+ * --------------------------------------------------------------------------*/
+
+/* the Data block receive status element configuration structure */
+typedef struct {
+	unsigned short number_Rx_status_elements    PACKED;/* number of receive status elements */
+	unsigned long base_addr_Rx_status_elements  PACKED;/* base address of the receive element list */
+	unsigned long next_Rx_status_element_to_use PACKED;/* pointer to the next receive element to be used */
+	unsigned long base_addr_Rx_buffer	PACKED;/* base address of the receive data buffer */
+	unsigned long end_addr_Rx_buffer 	PACKED;/* end address of the receive data buffer */
+} ASY_RX_STATUS_EL_CFG_STRUCT;
+
+/* the Data block receive status element structure */
+typedef struct {
+	unsigned char opp_flag 		PACKED;	/* opp flag */
+	unsigned short data_length 	PACKED;	/* length of the received data block */
+	unsigned char reserved_1 	PACKED;	/* reserved for internal use */
+	unsigned short time_stamp 	PACKED; /* receive time stamp (HDLC_STREAMING_MODE) */
+	unsigned short data_buffered 	PACKED;	/* the number of data bytes still buffered */
+	unsigned long reserved_2 	PACKED;	/* reserved for internal use */
+	unsigned long ptr_data_bfr 	PACKED;	/* pointer to the data area */
+} ASY_DATA_RX_STATUS_EL_STRUCT;
+
+#endif
diff --git a/include/linux/sdla_chdlc.h b/include/linux/sdla_chdlc.h
new file mode 100644
index 000000000000..d2e35a299034
--- /dev/null
+++ b/include/linux/sdla_chdlc.h
@@ -0,0 +1,813 @@
+/*************************************************************************
+ sdla_chdlc.h	Sangoma Cisco HDLC firmware API definitions
+
+ Author:      	Gideon Hack
+		Nenad Corbic <ncorbic@sangoma.com>	
+
+ Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+
+		This program is free software; you can redistribute it and/or
+		modify it under the term of the GNU General Public License
+		as published by the Free Software Foundation; either version
+		2 of the License, or (at your option) any later version.
+
+===========================================================================
+  Oct 04, 1999  Nenad Corbic    Updated API support
+  Jun 02, 1999  Gideon Hack     Changes for S514 usage.
+  Oct 28, 1998	Jaspreet Singh	Made changes for Dual Port CHDLC.
+  Jun 11, 1998	David Fong	Initial version.
+===========================================================================
+
+ Organization
+	- Compatibility notes
+	- Constants defining the shared memory control block (mailbox)
+	- Interface commands
+	- Return code from interface commands
+	- Constants for the commands (structures for casting data)
+	- UDP Management constants and structures
+
+*************************************************************************/
+
+#ifndef _SDLA_CHDLC_H
+#  define _SDLC_CHDLC_H
+
+/*------------------------------------------------------------------------
+   Notes:
+
+	All structres defined in this file are byte-aligned.  
+
+	Compiler	Platform
+	------------------------
+	GNU C		Linux
+
+------------------------------------------------------------------------*/
+
+#ifndef	PACKED
+#define	PACKED __attribute__((packed))
+#endif	/* PACKED */
+
+
+/* ----------------------------------------------------------------------------
+ *        Constants defining the shared memory control block (mailbox)
+ * --------------------------------------------------------------------------*/
+
+#define PRI_BASE_ADDR_MB_STRUCT 	0xE000 	/* the base address of the mailbox structure on the adapter */
+#define SEC_BASE_ADDR_MB_STRUCT 	0xE800 	/* the base address of the mailbox structure on the adapter */
+#define SIZEOF_MB_DATA_BFR		2032	/* the size of the actual mailbox data area */
+#define NUMBER_MB_RESERVED_BYTES	0x0B	/* the number of reserved bytes in the mailbox header area */
+
+
+#define MIN_LGTH_CHDLC_DATA_CFG  	300 	/* min length of the CHDLC data field (for configuration purposes) */
+#define PRI_MAX_NO_DATA_BYTES_IN_FRAME  15354 /* PRIMARY - max length of the CHDLC data field */
+
+typedef struct {
+	unsigned char opp_flag PACKED;			/* the opp flag */
+	unsigned char command PACKED;			/* the user command */
+	unsigned short buffer_length PACKED;		/* the data length */
+  	unsigned char return_code PACKED;		/* the return code */
+	unsigned char MB_reserved[NUMBER_MB_RESERVED_BYTES] PACKED;	/* reserved for later */
+	unsigned char data[SIZEOF_MB_DATA_BFR] PACKED;	/* the data area */
+} CHDLC_MAILBOX_STRUCT;
+
+typedef struct {
+        pid_t                   pid_num PACKED;
+        CHDLC_MAILBOX_STRUCT     cmdarea PACKED;
+
+} CMDBLOCK_STRUCT;
+
+
+
+
+/* ----------------------------------------------------------------------------
+ *                        Interface commands
+ * --------------------------------------------------------------------------*/
+
+/* global interface commands */
+#define READ_GLOBAL_EXCEPTION_CONDITION	0x01
+#define SET_GLOBAL_CONFIGURATION	0x02
+#define READ_GLOBAL_CONFIGURATION	0x03
+#define READ_GLOBAL_STATISTICS		0x04
+#define FLUSH_GLOBAL_STATISTICS		0x05
+#define SET_MODEM_STATUS		0x06	/* set status of DTR or RTS */
+#define READ_MODEM_STATUS		0x07	/* read status of CTS and DCD */
+#define READ_COMMS_ERROR_STATS		0x08	
+#define FLUSH_COMMS_ERROR_STATS		0x09
+#define SET_TRACE_CONFIGURATION		0x0A	/* set the line trace config */
+#define READ_TRACE_CONFIGURATION	0x0B	/* read the line trace config */
+#define READ_TRACE_STATISTICS		0x0C	/* read the trace statistics */
+#define FLUSH_TRACE_STATISTICS		0x0D	/* flush the trace statistics */
+#define FT1_MONITOR_STATUS_CTRL		0x1C	/* set the status of the S508/FT1 monitoring */
+#define SET_FT1_CONFIGURATION		0x18	/* set the FT1 configuration */
+#define READ_FT1_CONFIGURATION		0x19	/* read the FT1 configuration */
+#define TRANSMIT_ASYNC_DATA_TO_FT1	0x1A	/* output asynchronous data to the FT1 */
+#define RECEIVE_ASYNC_DATA_FROM_FT1	0x1B	/* receive asynchronous data from the FT1 */
+#define FT1_MONITOR_STATUS_CTRL		0x1C	/* set the status of the FT1 monitoring */
+
+#define READ_FT1_OPERATIONAL_STATS	0x1D	/* read the S508/FT1 operational statistics */
+#define SET_FT1_MODE			0x1E	/* set the operational mode of the S508/FT1 module */
+
+/* CHDLC-level interface commands */
+#define READ_CHDLC_CODE_VERSION		0x20	
+#define READ_CHDLC_EXCEPTION_CONDITION	0x21	/* read exception condition from the adapter */
+#define SET_CHDLC_CONFIGURATION		0x22
+#define READ_CHDLC_CONFIGURATION	0x23
+#define ENABLE_CHDLC_COMMUNICATIONS	0x24
+#define DISABLE_CHDLC_COMMUNICATIONS	0x25
+#define READ_CHDLC_LINK_STATUS		0x26
+#define READ_CHDLC_OPERATIONAL_STATS	0x27
+#define FLUSH_CHDLC_OPERATIONAL_STATS	0x28
+#define SET_CHDLC_INTERRUPT_TRIGGERS	0x30	/* set application interrupt triggers */
+#define READ_CHDLC_INTERRUPT_TRIGGERS	0x31	/* read application interrupt trigger configuration */
+
+/* Special UDP drivers management commands */
+#define CPIPE_ENABLE_TRACING				0x50
+#define CPIPE_DISABLE_TRACING				0x51
+#define CPIPE_GET_TRACE_INFO				0x52
+#define CPIPE_GET_IBA_DATA				0x53
+#define CPIPE_FT1_READ_STATUS				0x54
+#define CPIPE_DRIVER_STAT_IFSEND			0x55
+#define CPIPE_DRIVER_STAT_INTR				0x56
+#define CPIPE_DRIVER_STAT_GEN				0x57
+#define CPIPE_FLUSH_DRIVER_STATS			0x58
+#define CPIPE_ROUTER_UP_TIME				0x59
+
+/* Driver specific commands for API */
+#define	CHDLC_READ_TRACE_DATA		0xE4	/* read trace data */
+#define TRACE_ALL                       0x00
+#define TRACE_PROT			0x01
+#define TRACE_DATA			0x02
+
+#define DISCARD_RX_ERROR_FRAMES	0x0001
+
+/* ----------------------------------------------------------------------------
+ *                     Return codes from interface commands
+ * --------------------------------------------------------------------------*/
+
+#define COMMAND_OK				0x00
+
+/* return codes from global interface commands */
+#define NO_GLOBAL_EXCEP_COND_TO_REPORT		0x01	/* there is no CHDLC exception condition to report */
+#define LGTH_GLOBAL_CFG_DATA_INVALID		0x01	/* the length of the passed global configuration data is invalid */
+#define LGTH_TRACE_CFG_DATA_INVALID		0x01	/* the length of the passed trace configuration data is invalid */
+#define IRQ_TIMEOUT_VALUE_INVALID		0x02	/* an invalid application IRQ timeout value was selected */
+#define TRACE_CONFIG_INVALID			0x02	/* the passed line trace configuration is invalid */
+#define ADAPTER_OPERATING_FREQ_INVALID		0x03	/* an invalid adapter operating frequency was selected */
+#define TRC_DEAC_TMR_INVALID			0x03	/* the trace deactivation timer is invalid */
+#define S508_FT1_ADPTR_NOT_PRESENT		0x0C	/* the S508/FT1 adapter is not present */
+#define INVALID_FT1_STATUS_SELECTION            0x0D    /* the S508/FT1 status selection is invalid */
+#define FT1_OP_STATS_NOT_ENABLED		0x0D    /* the FT1 operational statistics have not been enabled */
+#define FT1_OP_STATS_NOT_AVAILABLE		0x0E    /* the FT1 operational statistics are not currently available */
+#define S508_FT1_MODE_SELECTION_BUSY		0x0E	/* the S508/FT1 adapter is busy selecting the operational mode */
+
+/* return codes from command READ_GLOBAL_EXCEPTION_CONDITION */
+#define EXCEP_MODEM_STATUS_CHANGE		0x10		/* a modem status change occurred */
+#define EXCEP_TRC_DISABLED			0x11		/* the trace has been disabled */
+#define EXCEP_IRQ_TIMEOUT			0x12		/* IRQ timeout */
+
+/* return codes from CHDLC-level interface commands */
+#define NO_CHDLC_EXCEP_COND_TO_REPORT		0x21	/* there is no CHDLC exception condition to report */
+#define CHDLC_COMMS_DISABLED			0x21	/* communications are not currently enabled */
+#define CHDLC_COMMS_ENABLED			0x21	/* communications are currently enabled */
+#define DISABLE_CHDLC_COMMS_BEFORE_CFG		0x21	/* CHDLC communications must be disabled before setting the configuration */
+#define ENABLE_CHDLC_COMMS_BEFORE_CONN		0x21	/* communications must be enabled before using the CHDLC_CONNECT conmmand */
+#define CHDLC_CFG_BEFORE_COMMS_ENABLED		0x22	/* perform a SET_CHDLC_CONFIGURATION before enabling comms */
+#define LGTH_CHDLC_CFG_DATA_INVALID 		0x22	/* the length of the passed CHDLC configuration data is invalid */
+#define LGTH_INT_TRIGGERS_DATA_INVALID		0x22	/* the length of the passed interrupt trigger data is invalid */
+#define INVALID_IRQ_SELECTED			0x23	/* in invalid IRQ was selected in the SET_CHDLC_INTERRUPT_TRIGGERS */
+#define INVALID_CHDLC_CFG_DATA			0x23	/* the passed CHDLC configuration data is invalid */
+#define IRQ_TMR_VALUE_INVALID			0x24	/* an invalid application IRQ timer value was selected */
+#define LARGER_PERCENT_TX_BFR_REQUIRED		0x24	/* a larger Tx buffer percentage is required */
+#define LARGER_PERCENT_RX_BFR_REQUIRED		0x25	/* a larger Rx buffer percentage is required */
+#define S514_BOTH_PORTS_SAME_CLK_MODE		0x26	/* S514 - both ports must have same clock mode */
+#define INVALID_CMND_HDLC_STREAM_MODE           0x4E    /* the CHDLC interface command is invalid for HDLC streaming mode */
+#define INVALID_CHDLC_COMMAND			0x4F	/* the defined CHDLC interface command is invalid */
+
+/* return codes from command READ_CHDLC_EXCEPTION_CONDITION */
+#define EXCEP_LINK_ACTIVE			0x30	/* the CHDLC link has become active */
+#define EXCEP_LINK_INACTIVE_MODEM		0x31	/* the CHDLC link has become inactive (modem status) */
+#define EXCEP_LINK_INACTIVE_KPALV		0x32	/* the CHDLC link has become inactive (keepalive status) */
+#define EXCEP_IP_ADDRESS_DISCOVERED		0x33	/* the IP address has been discovered */
+#define EXCEP_LOOPBACK_CONDITION		0x34	/* a loopback condition has occurred */
+
+
+/* return code from command CHDLC_SEND_WAIT and CHDLC_SEND_NO_WAIT */
+#define LINK_DISCONNECTED			0x21
+#define NO_TX_BFRS_AVAIL			0x24
+
+
+/* ----------------------------------------------------------------------------
+ * Constants for the SET_GLOBAL_CONFIGURATION/READ_GLOBAL_CONFIGURATION commands
+ * --------------------------------------------------------------------------*/
+
+/* the global configuration structure */
+typedef struct {
+	unsigned short adapter_config_options PACKED;	/* adapter config options */
+	unsigned short app_IRQ_timeout PACKED;		/* application IRQ timeout */
+	unsigned long adapter_operating_frequency PACKED;	/* adapter operating frequency */
+} GLOBAL_CONFIGURATION_STRUCT;
+
+/* settings for the 'app_IRQ_timeout' */
+#define MAX_APP_IRQ_TIMEOUT_VALUE	5000	/* the maximum permitted IRQ timeout */
+
+
+
+/* ----------------------------------------------------------------------------
+ *             Constants for the READ_GLOBAL_STATISTICS command
+ * --------------------------------------------------------------------------*/
+
+/* the global statistics structure */
+typedef struct {
+	unsigned short app_IRQ_timeout_count PACKED;
+} GLOBAL_STATS_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *             Constants for the READ_COMMS_ERROR_STATS command
+ * --------------------------------------------------------------------------*/
+
+/* the communications error statistics structure */
+typedef struct {
+	unsigned short Rx_overrun_err_count PACKED;
+	unsigned short CRC_err_count PACKED;	/* receiver CRC error count */
+	unsigned short Rx_abort_count PACKED; 	/* abort frames recvd count */
+	unsigned short Rx_dis_pri_bfrs_full_count PACKED;/* receiver disabled */
+	unsigned short comms_err_stat_reserved_1 PACKED;/* reserved for later */
+	unsigned short sec_Tx_abort_msd_Tx_int_count PACKED; /* secondary - abort frames transmitted count (missed Tx interrupt) */
+	unsigned short missed_Tx_und_int_count PACKED;	/* missed tx underrun interrupt count */
+        unsigned short sec_Tx_abort_count PACKED;   /*secondary-abort frames tx count */
+	unsigned short DCD_state_change_count PACKED; /* DCD state change */
+	unsigned short CTS_state_change_count PACKED; /* CTS state change */
+} COMMS_ERROR_STATS_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *                  Constants used for line tracing
+ * --------------------------------------------------------------------------*/
+
+/* the trace configuration structure (SET_TRACE_CONFIGURATION/READ_TRACE_CONFIGURATION commands) */
+typedef struct {
+	unsigned char trace_config PACKED;		/* trace configuration */
+	unsigned short trace_deactivation_timer PACKED;	/* trace deactivation timer */
+	unsigned long ptr_trace_stat_el_cfg_struct PACKED;	/* a pointer to the line trace element configuration structure */
+} LINE_TRACE_CONFIG_STRUCT;
+
+/* 'trace_config' bit settings */
+#define TRACE_INACTIVE		0x00	/* trace is inactive */
+#define TRACE_ACTIVE		0x01	/* trace is active */
+#define TRACE_DELAY_MODE	0x04	/* operate the trace in delay mode */
+#define TRACE_DATA_FRAMES	0x08	/* trace Data frames */
+#define TRACE_SLARP_FRAMES	0x10	/* trace SLARP frames */
+#define TRACE_CDP_FRAMES	0x20	/* trace CDP frames */
+
+/* the line trace status element configuration structure */
+typedef struct {
+	unsigned short number_trace_status_elements PACKED;	/* number of line trace elements */
+	unsigned long base_addr_trace_status_elements PACKED;	/* base address of the trace element list */
+	unsigned long next_trace_element_to_use PACKED;	/* pointer to the next trace element to be used */
+	unsigned long base_addr_trace_buffer PACKED;		/* base address of the trace data buffer */
+	unsigned long end_addr_trace_buffer PACKED;		/* end address of the trace data buffer */
+} TRACE_STATUS_EL_CFG_STRUCT;
+
+/* the line trace status element structure */
+typedef struct {
+	unsigned char opp_flag PACKED;			/* opp flag */
+	unsigned short trace_length PACKED;		/* trace length */
+	unsigned char trace_type PACKED;		/* trace type */
+	unsigned short trace_time_stamp PACKED;	/* time stamp */
+	unsigned short trace_reserved_1 PACKED;	/* reserved for later use */
+	unsigned long trace_reserved_2 PACKED;		/* reserved for later use */
+	unsigned long ptr_data_bfr PACKED;		/* ptr to the trace data buffer */
+} TRACE_STATUS_ELEMENT_STRUCT;
+
+/* "trace_type" bit settings */
+#define TRACE_INCOMING 			0x00
+#define TRACE_OUTGOINGING 		0x01
+#define TRACE_INCOMING_ABORTED 		0x10
+#define TRACE_INCOMING_CRC_ERROR 	0x20
+#define TRACE_INCOMING_OVERRUN_ERROR 	0x40
+
+
+
+/* the line trace statistics structure */
+typedef struct {
+	unsigned long frames_traced_count PACKED;	/* number of frames traced */
+	unsigned long trc_frms_not_recorded_count PACKED;	/* number of trace frames discarded */
+} LINE_TRACE_STATS_STRUCT;
+
+
+/* ----------------------------------------------------------------------------
+ *               Constants for the FT1_MONITOR_STATUS_CTRL command
+ * --------------------------------------------------------------------------*/
+
+#define DISABLE_FT1_STATUS_STATISTICS	0x00    /* disable the FT1 status and statistics monitoring */
+#define ENABLE_READ_FT1_STATUS		0x01    /* read the FT1 operational status */
+#define ENABLE_READ_FT1_OP_STATS	0x02    /* read the FT1 operational statistics */
+#define FLUSH_FT1_OP_STATS		0x04 	/* flush the FT1 operational statistics */
+
+
+
+
+/* ----------------------------------------------------------------------------
+ *               Constants for the SET_CHDLC_CONFIGURATION command
+ * --------------------------------------------------------------------------*/
+
+/* the CHDLC configuration structure */
+typedef struct {
+	unsigned long baud_rate PACKED;		/* the baud rate */	
+	unsigned short line_config_options PACKED;	/* line configuration options */
+	unsigned short modem_config_options PACKED;	/* modem configration options */
+	unsigned short modem_status_timer PACKED;	/* timer for monitoring modem status changes */
+	unsigned short CHDLC_API_options PACKED;	/* CHDLC API options */
+	unsigned short CHDLC_protocol_options PACKED;	/* CHDLC protocol options */
+	unsigned short percent_data_buffer_for_Tx PACKED;	/* percentage data buffering used for Tx */
+	unsigned short CHDLC_statistics_options PACKED;	/* CHDLC operational statistics options */
+	unsigned short max_CHDLC_data_field_length PACKED;	/* the maximum length of the CHDLC Data field */
+	unsigned short transmit_keepalive_timer PACKED;		/* the transmit keepalive timer */
+	unsigned short receive_keepalive_timer PACKED;		/* the receive keepalive timer */
+	unsigned short keepalive_error_tolerance PACKED;	/* the receive keepalive error tolerance */
+	unsigned short SLARP_request_timer PACKED;		/* the SLARP request timer */
+	unsigned long IP_address PACKED;			/* the IP address */
+	unsigned long IP_netmask PACKED;			/* the IP netmask */
+	unsigned long ptr_shared_mem_info_struct PACKED;	/* a pointer to the shared memory area information structure */
+	unsigned long ptr_CHDLC_Tx_stat_el_cfg_struct PACKED;	/* a pointer to the transmit status element configuration structure */
+	unsigned long ptr_CHDLC_Rx_stat_el_cfg_struct PACKED;	/* a pointer to the receive status element configuration structure */
+} CHDLC_CONFIGURATION_STRUCT;
+
+/* settings for the 'line_config_options' */
+#define INTERFACE_LEVEL_V35					0x0000 /* V.35 interface level */
+#define INTERFACE_LEVEL_RS232					0x0001 /* RS-232 interface level */
+
+/* settings for the 'modem_config_options' */
+
+#define DONT_RAISE_DTR_RTS_ON_EN_COMMS		0x0001
+/* don't automatically raise DTR and RTS when performing an
+   ENABLE_CHDLC_COMMUNICATIONS command */
+
+#define DONT_REPORT_CHG_IN_MODEM_STAT 		0x0002
+/* don't report changes in modem status to the application */
+
+
+/* bit settings for the 'CHDLC_protocol_options' byte */
+
+#define IGNORE_DCD_FOR_LINK_STAT		0x0001
+/* ignore DCD in determining the CHDLC link status */
+
+#define IGNORE_CTS_FOR_LINK_STAT		0x0002
+/* ignore CTS in determining the CHDLC link status */
+
+#define IGNORE_KPALV_FOR_LINK_STAT		0x0004
+/* ignore keepalive frames in determining the CHDLC link status */ 
+
+#define SINGLE_TX_BUFFER			0x4000 
+/* configure a single transmit buffer */
+
+#define HDLC_STREAMING_MODE			0x8000
+
+/*   settings for the 'CHDLC_statistics_options' */
+
+#define CHDLC_TX_DATA_BYTE_COUNT_STAT		0x0001
+/* record the number of Data bytes transmitted */
+
+#define CHDLC_RX_DATA_BYTE_COUNT_STAT		0x0002
+/* record the number of Data bytes received */
+
+#define CHDLC_TX_THROUGHPUT_STAT		0x0004
+/* compute the Data frame transmit throughput */
+
+#define CHDLC_RX_THROUGHPUT_STAT		0x0008
+/* compute the Data frame receive throughput */
+
+
+/* permitted minimum and maximum values for setting the CHDLC configuration */
+#define PRI_MAX_BAUD_RATE_S508	2666666 /* PRIMARY   - maximum baud rate (S508) */
+#define SEC_MAX_BAUD_RATE_S508	258064 	/* SECONDARY - maximum baud rate (S508) */
+#define PRI_MAX_BAUD_RATE_S514  2750000 /* PRIMARY   - maximum baud rate (S508) */
+#define SEC_MAX_BAUD_RATE_S514  515625  /* SECONDARY - maximum baud rate (S508) */
+ 
+#define MIN_MODEM_TIMER	0			/* minimum modem status timer */
+#define MAX_MODEM_TIMER	5000			/* maximum modem status timer */
+
+#define SEC_MAX_NO_DATA_BYTES_IN_FRAME  2048 /* SECONDARY - max length of the CHDLC data field */
+
+#define MIN_Tx_KPALV_TIMER	0	  /* minimum transmit keepalive timer */
+#define MAX_Tx_KPALV_TIMER	60000	  /* maximum transmit keepalive timer */
+#define DEFAULT_Tx_KPALV_TIMER	10000	  /* default transmit keepalive timer */
+
+#define MIN_Rx_KPALV_TIMER	10	  /* minimum receive keepalive timer */
+#define MAX_Rx_KPALV_TIMER	60000	  /* maximum receive keepalive timer */
+#define DEFAULT_Rx_KPALV_TIMER	10000	  /* default receive keepalive timer */
+
+#define MIN_KPALV_ERR_TOL	1	  /* min kpalv error tolerance count */
+#define MAX_KPALV_ERR_TOL	20	  /* max kpalv error tolerance count */
+#define DEFAULT_KPALV_ERR_TOL	3	  /* default value */
+
+#define MIN_SLARP_REQ_TIMER	0	  /* min transmit SLARP Request timer */
+#define MAX_SLARP_REQ_TIMER	60000	  /* max transmit SLARP Request timer */
+#define DEFAULT_SLARP_REQ_TIMER	0	  /* default value -- no SLARP */
+
+
+
+/* ----------------------------------------------------------------------------
+ *             Constants for the READ_CHDLC_LINK_STATUS command
+ * --------------------------------------------------------------------------*/
+
+/* the CHDLC status structure */
+typedef struct {
+	unsigned char CHDLC_link_status PACKED;	/* CHDLC link status */
+	unsigned char no_Data_frms_for_app PACKED;	/* number of Data frames available for the application */
+	unsigned char receiver_status PACKED;	/* enabled/disabled */
+	unsigned char SLARP_state PACKED;	/* internal SLARP state */
+} CHDLC_LINK_STATUS_STRUCT;
+
+/* settings for the 'CHDLC_link_status' variable */
+#define CHDLC_LINK_INACTIVE		0x00	/* the CHDLC link is inactive */
+#define CHDLC_LINK_ACTIVE		0x01	/* the CHDLC link is active */
+
+
+
+/* ----------------------------------------------------------------------------
+ *           Constants for the READ_CHDLC_OPERATIONAL_STATS command
+ * --------------------------------------------------------------------------*/
+
+/* the CHDLC operational statistics structure */
+typedef struct {
+
+	/* Data frame transmission statistics */
+	unsigned long Data_frames_Tx_count PACKED;	/* # of frames transmitted */
+	unsigned long Data_bytes_Tx_count PACKED; 	/* # of bytes transmitted */
+	unsigned long Data_Tx_throughput PACKED;	/* transmit throughput */
+	unsigned long no_ms_for_Data_Tx_thruput_comp PACKED;	/* millisecond time used for the Tx throughput computation */
+	unsigned long Tx_Data_discard_lgth_err_count PACKED;	/* number of Data frames discarded (length error) */
+	unsigned long reserved_Data_frm_Tx_stat1 PACKED;	/* reserved for later */
+	unsigned long reserved_Data_frm_Tx_stat2 PACKED;	/* reserved for later */
+	unsigned long reserved_Data_frm_Tx_stat3 PACKED;	/* reserved for later */
+
+	/* Data frame reception statistics */
+	unsigned long Data_frames_Rx_count PACKED;	/* number of frames received */
+	unsigned long Data_bytes_Rx_count PACKED;	/* number of bytes received */
+	unsigned long Data_Rx_throughput PACKED;	/* receive throughput */
+	unsigned long no_ms_for_Data_Rx_thruput_comp PACKED;	/* millisecond time used for the Rx throughput computation */
+	unsigned long Rx_Data_discard_short_count PACKED;	/* received Data frames discarded (too short) */
+	unsigned long Rx_Data_discard_long_count PACKED;	/* received Data frames discarded (too long) */
+	unsigned long Rx_Data_discard_inactive_count PACKED;	/* received Data frames discarded (link inactive) */
+	unsigned long reserved_Data_frm_Rx_stat1 PACKED;	/* reserved for later */
+
+	/* SLARP frame transmission/reception statistics */
+	unsigned long CHDLC_SLARP_REQ_Tx_count PACKED;		/* number of SLARP Request frames transmitted */
+	unsigned long CHDLC_SLARP_REQ_Rx_count PACKED;		/* number of SLARP Request frames received */
+	unsigned long CHDLC_SLARP_REPLY_Tx_count PACKED;	/* number of SLARP Reply frames transmitted */
+	unsigned long CHDLC_SLARP_REPLY_Rx_count PACKED;	/* number of SLARP Reply frames received */
+	unsigned long CHDLC_SLARP_KPALV_Tx_count PACKED;	/* number of SLARP keepalive frames transmitted */
+	unsigned long CHDLC_SLARP_KPALV_Rx_count PACKED;	/* number of SLARP keepalive frames received */
+	unsigned long reserved_SLARP_stat1 PACKED;		/* reserved for later */
+	unsigned long reserved_SLARP_stat2 PACKED;		/* reserved for later */
+
+	/* CDP frame transmission/reception statistics */
+	unsigned long CHDLC_CDP_Tx_count PACKED;		/* number of CDP frames transmitted */
+	unsigned long CHDLC_CDP_Rx_count PACKED;		/* number of CDP frames received */
+	unsigned long reserved_CDP_stat1 PACKED;		/* reserved for later */
+	unsigned long reserved_CDP_stat2 PACKED;		/* reserved for later */
+	unsigned long reserved_CDP_stat3 PACKED;		/* reserved for later */
+	unsigned long reserved_CDP_stat4 PACKED;		/* reserved for later */
+	unsigned long reserved_CDP_stat5 PACKED;		/* reserved for later */
+	unsigned long reserved_CDP_stat6 PACKED;		/* reserved for later */
+
+	/* Incoming frames with a format error statistics */
+	unsigned short Rx_frm_incomp_CHDLC_hdr_count PACKED;	/* frames received of with incomplete Cisco HDLC header */
+	unsigned short Rx_frms_too_long_count PACKED;		/* frames received of excessive length count */
+	unsigned short Rx_invalid_CHDLC_addr_count PACKED;	/* frames received with an invalid CHDLC address count */
+	unsigned short Rx_invalid_CHDLC_ctrl_count PACKED;	/* frames received with an invalid CHDLC control field count */
+	unsigned short Rx_invalid_CHDLC_type_count PACKED;	/* frames received of an invalid CHDLC frame type count */
+	unsigned short Rx_SLARP_invalid_code_count PACKED;	/* SLARP frame received with an invalid packet code */
+	unsigned short Rx_SLARP_Reply_bad_IP_addr PACKED;	/* SLARP Reply received - bad IP address */
+	unsigned short Rx_SLARP_Reply_bad_netmask PACKED;	/* SLARP Reply received - bad netmask */
+	unsigned long reserved_frm_format_err1 PACKED;		/* reserved for later */
+	unsigned long reserved_frm_format_err2 PACKED;		/* reserved for later */
+	unsigned long reserved_frm_format_err3 PACKED;		/* reserved for later */
+	unsigned long reserved_frm_format_err4 PACKED;		/* reserved for later */
+
+	/* CHDLC timeout/retry statistics */
+	unsigned short SLARP_Rx_keepalive_TO_count PACKED;	/* timeout count for incoming SLARP frames */
+	unsigned short SLARP_Request_TO_count PACKED;		/* timeout count for SLARP Request frames */
+	unsigned long To_retry_reserved_stat1 PACKED;		/* reserved for later */
+	unsigned long To_retry_reserved_stat2 PACKED;		/* reserved for later */
+	unsigned long To_retry_reserved_stat3 PACKED;		/* reserved for later */
+
+	/* CHDLC link active/inactive and loopback statistics */
+	unsigned short link_active_count PACKED;		/* number of times that the link went active */
+	unsigned short link_inactive_modem_count PACKED;	/* number of times that the link went inactive (modem failure) */
+	unsigned short link_inactive_keepalive_count PACKED;	/* number of times that the link went inactive (keepalive failure) */
+	unsigned short link_looped_count PACKED;		/* link looped count */
+	unsigned long link_status_reserved_stat1 PACKED;	/* reserved for later use */
+	unsigned long link_status_reserved_stat2 PACKED;	/* reserved for later use */
+
+	/* miscellaneous statistics */
+	unsigned long reserved_misc_stat1 PACKED;		/* reserved for later */
+	unsigned long reserved_misc_stat2 PACKED;		/* reserved for later */
+	unsigned long reserved_misc_stat3 PACKED;		/* reserved for later */
+	unsigned long reserved_misc_stat4 PACKED;		/* reserved for later */
+
+} CHDLC_OPERATIONAL_STATS_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *                 Constants for using application interrupts
+ * --------------------------------------------------------------------------*/
+
+/* the structure used for the SET_CHDLC_INTERRUPT_TRIGGERS/READ_CHDLC_INTERRUPT_TRIGGERS command */
+typedef struct {
+	unsigned char CHDLC_interrupt_triggers PACKED;	/* CHDLC interrupt trigger configuration */
+	unsigned char IRQ PACKED;			/* IRQ to be used */
+	unsigned short interrupt_timer PACKED;		/* interrupt timer */
+	unsigned short misc_interrupt_bits PACKED;	/* miscellaneous bits */
+} CHDLC_INT_TRIGGERS_STRUCT;
+
+/* 'CHDLC_interrupt_triggers' bit settings */
+#define APP_INT_ON_RX_FRAME		0x01	/* interrupt on Data frame reception */
+#define APP_INT_ON_TX_FRAME		0x02	/* interrupt when an Data frame may be transmitted */
+#define APP_INT_ON_COMMAND_COMPLETE	0x04	/* interrupt when an interface command is complete */
+#define APP_INT_ON_TIMER		0x08	/* interrupt on a defined millisecond timeout */
+#define APP_INT_ON_GLOBAL_EXCEP_COND 	0x10	/* interrupt on a global exception condition */
+#define APP_INT_ON_CHDLC_EXCEP_COND	0x20	/* interrupt on an CHDLC exception condition */
+#define APP_INT_ON_TRACE_DATA_AVAIL	0x80	/* interrupt when trace data is available */
+
+/* interrupt types indicated at 'interrupt_type' byte of the INTERRUPT_INFORMATION_STRUCT */
+#define NO_APP_INTS_PEND		0x00	/* no interrups are pending */
+#define RX_APP_INT_PEND			0x01	/* a receive interrupt is pending */
+#define TX_APP_INT_PEND			0x02	/* a transmit interrupt is pending */
+#define COMMAND_COMPLETE_APP_INT_PEND	0x04	/* a 'command complete' interrupt is pending */
+#define TIMER_APP_INT_PEND		0x08	/* a timer interrupt is pending */
+#define GLOBAL_EXCEP_COND_APP_INT_PEND 	0x10	/* a global exception condition interrupt is pending */
+#define CHDLC_EXCEP_COND_APP_INT_PEND 	0x20	/* an CHDLC exception condition interrupt is pending */
+#define TRACE_DATA_AVAIL_APP_INT_PEND	0x80	/* a trace data available interrupt is pending */
+
+
+/* modem status changes */
+#define DCD_HIGH			0x08
+#define CTS_HIGH			0x20
+
+
+/* ----------------------------------------------------------------------------
+ *                   Constants for Data frame transmission
+ * --------------------------------------------------------------------------*/
+
+/* the Data frame transmit status element configuration structure */
+typedef struct {
+	unsigned short number_Tx_status_elements PACKED;	/* number of transmit status elements */
+	unsigned long base_addr_Tx_status_elements PACKED;	/* base address of the transmit element list */
+	unsigned long next_Tx_status_element_to_use PACKED;	/* pointer to the next transmit element to be used */
+} CHDLC_TX_STATUS_EL_CFG_STRUCT;
+
+/* the Data frame transmit status element structure */
+typedef struct {
+	unsigned char opp_flag PACKED;		/* opp flag */
+	unsigned short frame_length PACKED;	/* length of the frame to be transmitted */
+	unsigned char reserved_1 PACKED;	/* reserved for internal use */
+	unsigned long reserved_2 PACKED;	/* reserved for internal use */
+	unsigned long reserved_3 PACKED;	/* reserved for internal use */
+	unsigned long ptr_data_bfr PACKED;	/* pointer to the data area */
+} CHDLC_DATA_TX_STATUS_EL_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *                   Constants for Data frame reception
+ * --------------------------------------------------------------------------*/
+
+/* the Data frame receive status element configuration structure */
+typedef struct {
+	unsigned short number_Rx_status_elements PACKED;	/* number of receive status elements */
+	unsigned long base_addr_Rx_status_elements PACKED;	/* base address of the receive element list */
+	unsigned long next_Rx_status_element_to_use PACKED;	/* pointer to the next receive element to be used */
+	unsigned long base_addr_Rx_buffer PACKED;		/* base address of the receive data buffer */
+	unsigned long end_addr_Rx_buffer PACKED;		/* end address of the receive data buffer */
+} CHDLC_RX_STATUS_EL_CFG_STRUCT;
+
+/* the Data frame receive status element structure */
+typedef struct {
+	unsigned char opp_flag PACKED;		/* opp flag */
+	unsigned short frame_length PACKED;   /* length of the received frame */
+        unsigned char error_flag PACKED; /* frame errors (HDLC_STREAMING_MODE)*/
+        unsigned short time_stamp PACKED; /* receive time stamp (HDLC_STREAMING_MODE) */
+        unsigned long reserved_1 PACKED; 	/* reserved for internal use */
+        unsigned short reserved_2 PACKED; 	/* reserved for internal use */
+        unsigned long ptr_data_bfr PACKED;	/* pointer to the data area */
+} CHDLC_DATA_RX_STATUS_EL_STRUCT;
+
+
+
+/* ----------------------------------------------------------------------------
+ *         Constants defining the shared memory information area
+ * --------------------------------------------------------------------------*/
+
+/* the global information structure */
+typedef struct {
+ 	unsigned char global_status PACKED;		/* global status */
+ 	unsigned char modem_status PACKED;		/* current modem status */
+ 	unsigned char global_excep_conditions PACKED;	/* global exception conditions */
+	unsigned char glob_info_reserved[5] PACKED;	/* reserved */
+	unsigned char codename[4] PACKED;		/* Firmware name */
+	unsigned char codeversion[4] PACKED;		/* Firmware version */
+} GLOBAL_INFORMATION_STRUCT;
+
+/* the CHDLC information structure */
+typedef struct {
+	unsigned char CHDLC_status PACKED;		/* CHDLC status */
+ 	unsigned char CHDLC_excep_conditions PACKED;	/* CHDLC exception conditions */
+	unsigned char CHDLC_info_reserved[14] PACKED;	/* reserved */
+} CHDLC_INFORMATION_STRUCT;
+
+/* the interrupt information structure */
+typedef struct {
+ 	unsigned char interrupt_type PACKED;		/* type of interrupt triggered */
+ 	unsigned char interrupt_permission PACKED;	/* interrupt permission mask */
+	unsigned char int_info_reserved[14] PACKED;	/* reserved */
+} INTERRUPT_INFORMATION_STRUCT;
+
+/* the S508/FT1 information structure */
+typedef struct {
+ 	unsigned char parallel_port_A_input PACKED;	/* input - parallel port A */
+ 	unsigned char parallel_port_B_input PACKED;	/* input - parallel port B */
+	unsigned char FT1_info_reserved[14] PACKED;	/* reserved */
+} FT1_INFORMATION_STRUCT;
+
+/* the shared memory area information structure */
+typedef struct {
+	GLOBAL_INFORMATION_STRUCT global_info_struct PACKED;		/* the global information structure */
+	CHDLC_INFORMATION_STRUCT CHDLC_info_struct PACKED;		/* the CHDLC information structure */
+	INTERRUPT_INFORMATION_STRUCT interrupt_info_struct PACKED;	/* the interrupt information structure */
+	FT1_INFORMATION_STRUCT FT1_info_struct PACKED;			/* the S508/FT1 information structure */
+} SHARED_MEMORY_INFO_STRUCT;
+
+/* ----------------------------------------------------------------------------
+ *        UDP Management constants and structures 
+ * --------------------------------------------------------------------------*/
+
+/* The embedded control block for UDP mgmt 
+   This is essentially a mailbox structure, without the large data field */
+
+typedef struct {
+        unsigned char  opp_flag PACKED;                  /* the opp flag */
+        unsigned char  command PACKED;                   /* the user command */
+        unsigned short buffer_length PACKED;             /* the data length */
+        unsigned char  return_code PACKED;               /* the return code */
+	unsigned char  MB_reserved[NUMBER_MB_RESERVED_BYTES] PACKED;	/* reserved for later */
+} cblock_t;
+
+
+/* UDP management packet layout (data area of ip packet) */
+/*
+typedef struct {
+	unsigned char		signature[8]	PACKED;
+	unsigned char		request_reply	PACKED;
+	unsigned char		id		PACKED;
+	unsigned char		reserved[6]	PACKED;
+	cblock_t		cblock		PACKED;
+	unsigned char		num_frames	PACKED;
+	unsigned char		ismoredata	PACKED;
+	unsigned char 		data[SIZEOF_MB_DATA_BFR] 	PACKED;
+} udp_management_packet_t;
+
+*/
+
+typedef struct {
+	unsigned char		num_frames	PACKED;
+	unsigned char		ismoredata	PACKED;
+} trace_info_t;
+
+typedef struct {
+	ip_pkt_t 		ip_pkt		PACKED;
+	udp_pkt_t		udp_pkt		PACKED;
+	wp_mgmt_t		wp_mgmt		PACKED;
+	cblock_t                cblock          PACKED;
+	trace_info_t       	trace_info      PACKED;
+	unsigned char           data[SIZEOF_MB_DATA_BFR]      PACKED;
+} chdlc_udp_pkt_t;
+
+typedef struct ft1_exec_cmd{
+	unsigned char  command PACKED;                   /* the user command */
+        unsigned short buffer_length PACKED;             /* the data length */
+        unsigned char  return_code PACKED;               /* the return code */
+	unsigned char  MB_reserved[NUMBER_MB_RESERVED_BYTES] PACKED;
+} ft1_exec_cmd_t;
+
+typedef struct {
+	unsigned char  opp_flag 			PACKED;
+	ft1_exec_cmd_t cmd				PACKED;
+	unsigned char  data[SIZEOF_MB_DATA_BFR]      	PACKED;
+} ft1_exec_t;
+
+#define UDPMGMT_SIGNATURE	"CTPIPEAB"
+
+
+/* UDP/IP packet (for UDP management) layout */
+/*
+typedef struct {
+	unsigned char	reserved[2]	PACKED;
+	unsigned short	ip_length	PACKED;
+	unsigned char	reserved2[4]	PACKED;
+	unsigned char	ip_ttl		PACKED;
+	unsigned char	ip_protocol	PACKED;
+	unsigned short	ip_checksum	PACKED;
+	unsigned long	ip_src_address	PACKED;
+	unsigned long	ip_dst_address	PACKED;
+	unsigned short	udp_src_port	PACKED;
+	unsigned short	udp_dst_port	PACKED;
+	unsigned short	udp_length	PACKED;
+	unsigned short	udp_checksum	PACKED;
+	udp_management_packet_t um_packet PACKED;
+} ip_packet_t;
+*/
+
+/* valid ip_protocol for UDP management */
+#define UDPMGMT_UDP_PROTOCOL 0x11
+
+
+typedef struct {
+	unsigned char	status		PACKED;
+	unsigned char	data_avail	PACKED;
+	unsigned short	real_length	PACKED;
+	unsigned short	time_stamp	PACKED;
+	unsigned char	data[1]		PACKED;
+} trace_pkt_t;
+
+typedef struct {
+	unsigned char	error_flag	PACKED;
+	unsigned short	time_stamp	PACKED;
+	unsigned char	reserved[13]	PACKED;
+} api_rx_hdr_t;
+
+typedef struct {
+        api_rx_hdr_t	api_rx_hdr      PACKED;
+        void *   	data    	PACKED;
+} api_rx_element_t;
+
+typedef struct {
+	unsigned char 	attr		PACKED;
+	unsigned char  	reserved[15]	PACKED;
+} api_tx_hdr_t;
+
+typedef struct {
+	api_tx_hdr_t 	api_tx_hdr	PACKED;
+	void *		data		PACKED;
+} api_tx_element_t;
+
+/* ----------------------------------------------------------------------------
+ *   Constants for the SET_FT1_CONFIGURATION/READ_FT1_CONFIGURATION command
+ * --------------------------------------------------------------------------*/
+
+/* the FT1 configuration structure */
+typedef struct {
+	unsigned short framing_mode;
+	unsigned short encoding_mode;
+	unsigned short line_build_out;
+	unsigned short channel_base;
+	unsigned short baud_rate_kbps;					/* the baud rate (in kbps) */	
+	unsigned short clock_mode;
+} ft1_config_t;
+
+/* settings for the 'framing_mode' */
+#define ESF_FRAMING 	0x00	/* ESF framing */
+#define D4_FRAMING  	0x01	/* D4 framing */
+
+/* settings for the 'encoding_mode' */
+#define B8ZS_ENCODING 	0x00	/* B8ZS encoding */
+#define AMI_ENCODING	0x01	/* AMI encoding */
+
+/* settings for the 'line_build_out' */
+#define LN_BLD_CSU_0dB_DSX1_0_to_133	0x00	/* set build out to CSU (0db) or DSX-1 (0-133ft) */
+#define LN_BLD_DSX1_133_to_266		0x01	/* set build out DSX-1 (133-266ft) */
+#define LN_BLD_DSX1_266_to_399		0x02	/* set build out DSX-1 (266-399ft) */
+#define LN_BLD_DSX1_399_to_533		0x03	/* set build out DSX-1 (399-533ft) */
+#define LN_BLD_DSX1_533_to_655		0x04	/* set build out DSX-1 (533-655ft) */
+#define LN_BLD_CSU_NEG_7dB		0x05	/* set build out to CSU (-7.5db) */
+#define LN_BLD_CSU_NEG_15dB		0x06	/* set build out to CSU (-15db) */
+#define LN_BLD_CSU_NEG_22dB		0x07	/* set build out to CSU (-22.5db) */
+
+/* settings for the 'channel_base' */
+#define MIN_CHANNEL_BASE_VALUE		1		/* the minimum permitted channel base value */
+#define MAX_CHANNEL_BASE_VALUE		24		/* the maximum permitted channel base value */
+
+/* settings for the 'baud_rate_kbps' */
+#define MIN_BAUD_RATE_KBPS		0		/* the minimum permitted baud rate (kbps) */
+#define MAX_BAUD_RATE_KBPS 		1536	/* the maximum permitted baud rate (kbps) */
+#define BAUD_RATE_FT1_AUTO_CONFIG	0xFFFF /* the baud rate used to trigger an automatic FT1 configuration */
+
+/* settings for the 'clock_mode' */
+#define CLOCK_MODE_NORMAL		0x00	/* clock mode set to normal (slave) */
+#define CLOCK_MODE_MASTER		0x01	/* clock mode set to master */
+
+
+#define BAUD_RATE_FT1_AUTO_CONFIG   	0xFFFF
+#define AUTO_FT1_CONFIG_NOT_COMPLETE	0x08
+#define AUTO_FT1_CFG_FAIL_OP_MODE	0x0C
+#define AUTO_FT1_CFG_FAIL_INVALID_LINE 	0x0D
+
+ 
+#ifdef		_MSC_
+#  pragma	pack()
+#endif
+#endif	/* _SDLA_CHDLC_H */
diff --git a/include/linux/sdla_fr.h b/include/linux/sdla_fr.h
new file mode 100644
index 000000000000..cdfa77fcb06b
--- /dev/null
+++ b/include/linux/sdla_fr.h
@@ -0,0 +1,638 @@
+/*****************************************************************************
+* sdla_fr.h	Sangoma frame relay firmware API definitions.
+*
+* Author:       Gideon Hack  	
+*		Nenad Corbic <ncorbic@sangoma.com> 	
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Oct 04, 1999  Gideon Hack     Updated API structures
+* Jun 02, 1999  Gideon Hack 	Modifications for S514 support
+* Oct 12, 1997	Jaspreet Singh	Added FR_READ_DLCI_IB_MAPPING
+* Jul 21, 1997 	Jaspreet Singh	Changed FRRES_TOO_LONG and FRRES_TOO_MANY to 
+*				0x05 and 0x06 respectively.
+* Dec 23, 1996	Gene Kozin	v2.0
+* Apr 29, 1996	Gene Kozin	v1.0 (merged version S502 & S508 definitions).
+* Sep 26, 1995	Gene Kozin	Initial version.
+*****************************************************************************/
+#ifndef	_SDLA_FR_H
+#define	_SDLA_FR_H
+
+/*----------------------------------------------------------------------------
+ * Notes:
+ * ------
+ * 1. All structures defined in this file are byte-alined.  
+ *
+ *	Compiler	Platform
+ *	--------	--------
+ *	GNU C		Linux
+ */
+
+#ifndef	PACKED
+#    define	PACKED	__attribute__((packed))
+#endif	/* PACKED */
+
+/* Adapter memory layout */
+#define	FR_MB_VECTOR	0xE000	/* mailbox window vector */
+#define	FR502_RX_VECTOR	0xA000	/* S502 direct receive window vector */
+#define	FR502_MBOX_OFFS	0xF60	/* S502 mailbox offset */
+#define	FR508_MBOX_OFFS	0	/* S508 mailbox offset */
+#define	FR502_FLAG_OFFS	0x1FF0	/* S502 status flags offset */
+#define	FR508_FLAG_OFFS	0x1000	/* S508 status flags offset */
+#define	FR502_RXMB_OFFS	0x900	/* S502 direct receive mailbox offset */
+#define	FR508_TXBC_OFFS	0x1100	/* S508 Tx buffer info offset */
+#define	FR508_RXBC_OFFS	0x1120	/* S508 Rx buffer info offset */
+
+/* Important constants */
+#define FR502_MAX_DATA	4096	/* maximum data buffer length */
+#define FR508_MAX_DATA	4080	/* maximum data buffer length */
+#define MIN_LGTH_FR_DATA_CFG         300     /* min Information frame length
+(for configuration purposes) */
+#define FR_MAX_NO_DATA_BYTES_IN_FRAME  15354 	/* max Information frame length */
+ 
+#define HIGHEST_VALID_DLCI	991
+
+/****** Data Structures *****************************************************/
+
+/*----------------------------------------------------------------------------
+ * Frame relay command block.
+ */
+typedef struct fr_cmd
+{
+	unsigned char  command	PACKED;	/* command code */
+	unsigned short length	PACKED;	/* length of data buffer */
+	unsigned char  result	PACKED;	/* return code */
+	unsigned short dlci	PACKED;	/* DLCI number */
+	unsigned char  attr	PACKED;	/* FECN, BECN, DE and C/R bits */
+	unsigned short rxlost1	PACKED;	/* frames discarded at int. level */
+	unsigned long  rxlost2	PACKED;	/* frames discarded at app. level */
+	unsigned char  rsrv[2]	PACKED;	/* reserved for future use */
+} fr_cmd_t;
+
+/* 'command' field defines */
+#define	FR_WRITE		0x01
+#define	FR_READ			0x02
+#define	FR_ISSUE_IS_FRAME	0x03
+#define FR_SET_CONFIG		0x10
+#define FR_READ_CONFIG		0x11
+#define FR_COMM_DISABLE		0x12
+#define FR_COMM_ENABLE		0x13
+#define FR_READ_STATUS		0x14
+#define FR_READ_STATISTICS	0x15
+#define FR_FLUSH_STATISTICS	0x16
+#define	FR_LIST_ACTIVE_DLCI	0x17
+#define FR_FLUSH_DATA_BUFFERS	0x18
+#define FR_READ_ADD_DLC_STATS	0x19
+#define	FR_ADD_DLCI		0x20
+#define	FR_DELETE_DLCI		0x21
+#define	FR_ACTIVATE_DLCI	0x22
+#define	FR_DEACTIVATE_DLCI	0x22
+#define FR_READ_MODEM_STATUS	0x30
+#define FR_SET_MODEM_STATUS	0x31
+#define FR_READ_ERROR_STATS	0x32
+#define FR_FLUSH_ERROR_STATS	0x33
+#define FR_READ_DLCI_IB_MAPPING 0x34
+#define FR_READ_CODE_VERSION	0x40
+#define	FR_SET_INTR_MODE	0x50
+#define	FR_READ_INTR_MODE	0x51
+#define FR_SET_TRACE_CONFIG	0x60
+#define FR_FT1_STATUS_CTRL 	0x80
+#define FR_SET_FT1_MODE		0x81
+
+/* Special UDP drivers management commands */
+#define FPIPE_ENABLE_TRACING          	0x41
+#define FPIPE_DISABLE_TRACING		0x42
+#define FPIPE_GET_TRACE_INFO            0x43
+#define FPIPE_FT1_READ_STATUS           0x44
+#define FPIPE_DRIVER_STAT_IFSEND        0x45
+#define FPIPE_DRIVER_STAT_INTR          0x46
+#define FPIPE_DRIVER_STAT_GEN           0x47
+#define FPIPE_FLUSH_DRIVER_STATS        0x48
+#define FPIPE_ROUTER_UP_TIME            0x49
+
+/* 'result' field defines */
+#define FRRES_OK		0x00	/* command executed successfully */
+#define	FRRES_DISABLED		0x01	/* communications not enabled */
+#define	FRRES_INOPERATIVE	0x02	/* channel inoperative */
+#define	FRRES_DLCI_INACTIVE	0x03	/* DLCI is inactive */
+#define	FRRES_DLCI_INVALID	0x04	/* DLCI is not configured */
+#define	FRRES_TOO_LONG		0x05
+#define	FRRES_TOO_MANY		0x06
+#define	FRRES_CIR_OVERFLOW	0x07	/* Tx throughput has exceeded CIR */
+#define	FRRES_BUFFER_OVERFLOW	0x08
+#define	FRRES_MODEM_FAILURE	0x10	/* DCD and/or CTS dropped */
+#define	FRRES_CHANNEL_DOWN	0x11	/* channel became inoperative */
+#define	FRRES_CHANNEL_UP	0x12	/* channel became operative */
+#define	FRRES_DLCI_CHANGE	0x13	/* DLCI status (or number) changed */
+#define	FRRES_DLCI_MISMATCH	0x14
+#define	FRRES_INVALID_CMD	0x1F	/* invalid command */
+
+/* 'attr' field defines */
+#define	FRATTR_
+
+/*----------------------------------------------------------------------------
+ * Frame relay mailbox.
+ *	This structure is located at offset FR50?_MBOX_OFFS into FR_MB_VECTOR.
+ *	For S502 it is also located at offset FR502_RXMB_OFFS into
+ *	FR502_RX_VECTOR.
+ */
+typedef struct fr_mbox
+{
+	unsigned char opflag	PACKED;	/* 00h: execution flag */
+	fr_cmd_t cmd		PACKED;	/* 01h: command block */
+	unsigned char data[1]	PACKED;	/* 10h: variable length data buffer */
+} fr_mbox_t;
+
+/*----------------------------------------------------------------------------
+ * S502 frame relay status flags.
+ *	This structure is located at offset FR502_FLAG_OFFS into FR_MB_VECTOR.
+ */
+typedef struct	fr502_flags
+{	
+	unsigned char rsrv1[1]	PACKED;	/* 00h: */
+	unsigned char tx_ready	PACKED;	/* 01h: Tx buffer available */
+	unsigned char rx_ready	PACKED;	/* 02h: Rx frame available */
+	unsigned char event	PACKED;	/* 03h: asynchronous event */
+	unsigned char mstatus	PACKED;	/* 04h: modem status */
+	unsigned char rsrv2[8]	PACKED;	/* 05h: */
+	unsigned char iflag	PACKED;	/* 0Dh: interrupt flag */
+	unsigned char imask	PACKED;	/* 0Eh: interrupt mask */
+} fr502_flags_t;
+
+/*----------------------------------------------------------------------------
+ * S508 frame relay status flags.
+ *	This structure is located at offset FR508_FLAG_OFFS into FR_MB_VECTOR.
+ */
+typedef struct	fr508_flags
+{
+	unsigned char rsrv1[3]	PACKED;	/* 00h: reserved */
+	unsigned char event	PACKED;	/* 03h: asynchronous event */
+	unsigned char mstatus	PACKED;	/* 04h: modem status */
+	unsigned char rsrv2[11]	PACKED;	/* 05h: reserved */
+	unsigned char iflag	PACKED;	/* 10h: interrupt flag */
+	unsigned char imask	PACKED;	/* 11h: interrupt mask */
+	unsigned long tse_offs	PACKED;	/* 12h: Tx status element */
+	unsigned short dlci	PACKED; /* 16h: DLCI NUMBER */
+} fr508_flags_t;
+
+/* 'event' field defines */
+#define	FR_EVENT_STATUS		0x01	/* channel status change */
+#define	FR_EVENT_DLC_STATUS	0x02	/* DLC status change */
+#define	FR_EVENT_BAD_DLCI	0x04	/* FSR included wrong DLCI */
+#define	FR_EVENT_LINK_DOWN	0x40	/* DCD or CTS low */
+
+/* 'mstatus' field defines */
+#define	FR_MDM_DCD		0x08	/* mdm_status: DCD */
+#define	FR_MDM_CTS		0x20	/* mdm_status: CTS */
+
+/* 'iflag' & 'imask' fields defines */
+#define	FR_INTR_RXRDY		0x01	/* Rx ready */
+#define	FR_INTR_TXRDY		0x02	/* Tx ready */
+#define	FR_INTR_MODEM		0x04	/* modem status change (DCD, CTS) */
+#define	FR_INTR_READY		0x08	/* interface command completed */
+#define	FR_INTR_DLC		0x10	/* DLC status change */
+#define	FR_INTR_TIMER		0x20	/* millisecond timer */
+#define FR_INTR_TX_MULT_DLCIs	0x80	/* Tx interrupt on multiple DLCIs */
+
+
+/*----------------------------------------------------------------------------
+ * Receive Buffer Configuration Info. S508 only!
+ *	This structure is located at offset FR508_RXBC_OFFS into FR_MB_VECTOR.
+ */
+typedef struct	fr_buf_info
+{
+	unsigned short rse_num	PACKED;	/* 00h: number of status elements */
+	unsigned long rse_base	PACKED;	/* 02h: receive status array base */
+	unsigned long rse_next	PACKED;	/* 06h: next status element */
+	unsigned long buf_base	PACKED;	/* 0Ah: rotational buffer base */
+	unsigned short reserved	PACKED;	/* 0Eh:  */
+	unsigned long buf_top	PACKED;	/* 10h: rotational buffer top */
+} fr_buf_info_t;
+
+/*----------------------------------------------------------------------------
+ * Buffer Status Element. S508 only!
+ *	Array of structures of this type is located at offset defined by the
+ *	'rse_base' field of the frBufInfo_t structure into absolute adapter
+ *	memory address space.
+ */
+typedef struct	fr_rx_buf_ctl
+{
+	unsigned char flag	PACKED;	/* 00h: ready flag */
+	unsigned short length	PACKED;	/* 01h: frame length */
+	unsigned short dlci	PACKED;	/* 03h: DLCI */
+	unsigned char attr	PACKED;	/* 05h: FECN/BECN/DE/CR */
+	unsigned short tmstamp	PACKED;	/* 06h: time stamp */
+	unsigned short rsrv[2]	PACKED; /* 08h:  */
+	unsigned long offset	PACKED;	/* 0Ch: buffer absolute address */
+} fr_rx_buf_ctl_t;
+
+typedef struct  fr_tx_buf_ctl
+{
+        unsigned char flag      PACKED; /* 00h: ready flag */
+	unsigned short rsrv0[2]	PACKED;	/* 01h: */
+        unsigned short length   PACKED; /* 05h: frame length */
+        unsigned short dlci     PACKED; /* 07h: DLCI */
+        unsigned char attr      PACKED; /* 09h: FECN/BECN/DE/CR */
+        unsigned short rsrv1 	PACKED; /* 0Ah:  */
+        unsigned long offset    PACKED; /* 0Ch: buffer absolute address */
+} fr_tx_buf_ctl_t;
+
+/*----------------------------------------------------------------------------
+ * Global Configuration Block. Passed to FR_SET_CONFIG command when dlci == 0.
+ */
+typedef struct	fr_conf
+{
+	unsigned short station	PACKED;	/* 00h: CPE/Node */
+	unsigned short options	PACKED;	/* 02h: configuration options */
+	unsigned short kbps	PACKED;	/* 04h: baud rate in kbps */
+	unsigned short port	PACKED;	/* 06h: RS-232/V.35 */
+	unsigned short mtu	PACKED;	/* 08h: max. transmit length */
+	unsigned short t391	PACKED;	/* 0Ah:  */
+	unsigned short t392	PACKED;	/* 0Ch:  */
+	unsigned short n391	PACKED;	/* 0Eh:  */
+	unsigned short n392	PACKED;	/* 10h:  */
+	unsigned short n393	PACKED;	/* 12h:  */
+	unsigned short cir_fwd	PACKED;	/* 14h:  */
+	unsigned short bc_fwd	PACKED;	/* 16h:  */
+	unsigned short be_fwd	PACKED;	/* 18h:  */
+	unsigned short cir_bwd	PACKED;	/* 1Ah:  */
+	unsigned short bc_bwd	PACKED;	/* 1Ch:  */
+	unsigned short be_bwd	PACKED;	/* 1Eh:  */
+	unsigned short dlci[0]	PACKED;	/* 20h:  */
+} fr_conf_t;
+
+/* 'station_type' defines */
+#define	FRCFG_STATION_CPE	0
+#define	FRCFG_STATION_NODE	1
+
+/* 'conf_flags' defines */
+#define	FRCFG_IGNORE_TX_CIR	0x0001
+#define	FRCFG_IGNORE_RX_CIR	0x0002
+#define	FRCFG_DONT_RETRANSMIT	0x0004
+#define	FRCFG_IGNORE_CBS	0x0008
+#define	FRCFG_THROUGHPUT	0x0010	/* enable throughput calculation */
+#define	FRCFG_DIRECT_RX		0x0080	/* enable direct receive buffer */
+#define	FRCFG_AUTO_CONFIG	0x8000	/* enable  auto DLCI configuration */
+
+/* 'baud_rate' defines */
+#define	FRCFG_BAUD_1200		12
+#define	FRCFG_BAUD_2400		24
+#define	FRCFG_BAUD_4800		48
+#define	FRCFG_BAUD_9600		96
+#define	FRCFG_BAUD_19200	19
+#define	FRCFG_BAUD_38400	38
+#define	FRCFG_BAUD_56000	56
+#define	FRCFG_BAUD_64000	64
+#define	FRCFG_BAUD_128000	128
+
+/* 'port_mode' defines */
+#define	FRCFG_MODE_EXT_CLK	0x0000
+#define	FRCFG_MODE_INT_CLK	0x0001
+#define	FRCFG_MODE_V35		0x0000	/* S508 only */
+#define	FRCFG_MODE_RS232	0x0002	/* S508 only */
+
+/* defines for line tracing */
+
+/* the line trace status element presented by the frame relay code */
+typedef struct {
+        unsigned char flag      PACKED; /* ready flag */
+        unsigned short length   PACKED; /* trace length */
+        unsigned char rsrv0[2]  PACKED; /* reserved */
+        unsigned char attr      PACKED; /* trace attributes */
+        unsigned short tmstamp  PACKED; /* time stamp */
+        unsigned char rsrv1[4]  PACKED; /* reserved */
+        unsigned long offset    PACKED; /* buffer absolute address */
+} fr_trc_el_t;
+
+typedef struct {
+        unsigned char status    	PACKED; /* status flag */
+	unsigned char data_passed	PACKED;	/* 0 if no data passed, 1 if */
+						/* data passed */
+        unsigned short length   	PACKED; /* frame length */
+        unsigned short tmstamp  	PACKED; /* time stamp */
+} fpipemon_trc_hdr_t;
+
+typedef struct {
+	fpipemon_trc_hdr_t fpipemon_trc_hdr			PACKED;
+        unsigned char data[FR_MAX_NO_DATA_BYTES_IN_FRAME]	PACKED;
+} fpipemon_trc_t;
+
+/* bit settings for the 'status' byte  - note that bits 1, 2 and 3 are used */
+/* for returning the number of frames being passed to fpipemon */
+#define TRC_OUTGOING_FRM	0x01
+#define TRC_ABORT_ERROR         0x10
+#define TRC_CRC_ERROR           0x20
+#define TRC_OVERRUN_ERROR       0x40
+#define MORE_TRC_DATA		0x80
+
+#define MAX_FRMS_TRACED		0x07
+
+#define NO_TRC_ELEMENTS_OFF		0x9000
+#define BASE_TRC_ELEMENTS_OFF		0x9002
+#define TRC_ACTIVE			0x01
+#define FLUSH_TRC_BUFFERS 		0x02
+#define FLUSH_TRC_STATISTICS		0x04
+#define TRC_SIGNALLING_FRMS		0x10
+#define TRC_INFO_FRMS			0x20
+#define ACTIVATE_TRC	(TRC_ACTIVE | TRC_SIGNALLING_FRMS | TRC_INFO_FRMS)
+#define RESET_TRC	(FLUSH_TRC_BUFFERS | FLUSH_TRC_STATISTICS)
+
+/*----------------------------------------------------------------------------
+ * Channel configuration.
+ *	This structure is passed to the FR_SET_CONFIG command when dlci != 0.
+ */
+typedef struct	fr_dlc_conf
+{
+	unsigned short conf_flags	PACKED;	/* 00h: configuration bits */
+	unsigned short cir_fwd		PACKED;	/* 02h:  */
+	unsigned short bc_fwd		PACKED;	/* 04h:  */
+	unsigned short be_fwd		PACKED;	/* 06h:  */
+	unsigned short cir_bwd		PACKED;	/* 08h:  */
+	unsigned short bc_bwd		PACKED;	/* 0Ah:  */
+	unsigned short be_bwd		PACKED;	/* 0Ch:  */
+} fr_dlc_conf_t;
+
+/*----------------------------------------------------------------------------
+ * S502 interrupt mode control block.
+ *	This structure is passed to the FR_SET_INTR_FLAGS and returned by the
+ *	FR_READ_INTR_FLAGS commands.
+ */
+typedef struct fr502_intr_ctl
+{
+	unsigned char mode	PACKED;	/* 00h: interrupt enable flags */
+	unsigned short tx_len	PACKED;	/* 01h: required Tx buffer size */
+} fr502_intr_ctl_t;
+
+/*----------------------------------------------------------------------------
+ * S508 interrupt mode control block.
+ *	This structure is passed to the FR_SET_INTR_FLAGS and returned by the
+ *	FR_READ_INTR_FLAGS commands.
+ */
+typedef struct fr508_intr_ctl
+{
+	unsigned char mode	PACKED;	/* 00h: interrupt enable flags */
+	unsigned short tx_len	PACKED;	/* 01h: required Tx buffer size */
+	unsigned char irq	PACKED;	/* 03h: IRQ level to activate */
+	unsigned char flags	PACKED;	/* 04h: ?? */
+	unsigned short timeout	PACKED;	/* 05h: ms, for timer interrupt */
+} fr508_intr_ctl_t;
+
+/*----------------------------------------------------------------------------
+ * Channel status.
+ *	This structure is returned by the FR_READ_STATUS command.
+ */
+typedef struct	fr_dlc_Status
+{
+	unsigned char status		PACKED;	/* 00h: link/DLCI status */
+	struct
+	{
+		unsigned short dlci	PACKED;	/* 01h: DLCI number */
+		unsigned char status	PACKED;	/* 03h: DLCI status */
+	} circuit[1]			PACKED;
+} fr_dlc_status_t;
+
+/* 'status' defines */
+#define	FR_LINK_INOPER	0x00		/* for global status (DLCI == 0) */
+#define	FR_LINK_OPER	0x01
+#define	FR_DLCI_DELETED	0x01		/* for circuit status (DLCI != 0) */
+#define	FR_DLCI_ACTIVE	0x02
+#define	FR_DLCI_WAITING	0x04
+#define	FR_DLCI_NEW	0x08
+#define	FR_DLCI_REPORT	0x40
+
+/*----------------------------------------------------------------------------
+ * Global Statistics Block.
+ *	This structure is returned by the FR_READ_STATISTICS command when
+ *	dcli == 0.
+ */
+typedef struct	fr_link_stat
+{
+	unsigned short rx_too_long	PACKED;	/* 00h:  */
+	unsigned short rx_dropped	PACKED;	/* 02h:  */
+	unsigned short rx_dropped2	PACKED;	/* 04h:  */
+	unsigned short rx_bad_dlci	PACKED;	/* 06h:  */
+	unsigned short rx_bad_format	PACKED;	/* 08h:  */
+	unsigned short retransmitted	PACKED;	/* 0Ah:  */
+	unsigned short cpe_tx_FSE	PACKED;	/* 0Ch:  */
+	unsigned short cpe_tx_LIV	PACKED;	/* 0Eh:  */
+	unsigned short cpe_rx_FSR	PACKED;	/* 10h:  */
+	unsigned short cpe_rx_LIV	PACKED;	/* 12h:  */
+	unsigned short node_rx_FSE	PACKED;	/* 14h:  */
+	unsigned short node_rx_LIV	PACKED;	/* 16h:  */
+	unsigned short node_tx_FSR	PACKED;	/* 18h:  */
+	unsigned short node_tx_LIV	PACKED;	/* 1Ah:  */
+	unsigned short rx_ISF_err	PACKED;	/* 1Ch:  */
+	unsigned short rx_unsolicited	PACKED;	/* 1Eh:  */
+	unsigned short rx_SSN_err	PACKED;	/* 20h:  */
+	unsigned short rx_RSN_err	PACKED;	/* 22h:  */
+	unsigned short T391_timeouts	PACKED;	/* 24h:  */
+	unsigned short T392_timeouts	PACKED;	/* 26h:  */
+	unsigned short N392_reached	PACKED;	/* 28h:  */
+	unsigned short cpe_SSN_RSN	PACKED;	/* 2Ah:  */
+	unsigned short current_SSN	PACKED;	/* 2Ch:  */
+	unsigned short current_RSN	PACKED;	/* 2Eh:  */
+	unsigned short curreny_T391	PACKED;	/* 30h:  */
+	unsigned short current_T392	PACKED;	/* 32h:  */
+	unsigned short current_N392	PACKED;	/* 34h:  */
+	unsigned short current_N393	PACKED;	/* 36h:  */
+} fr_link_stat_t;
+
+/*----------------------------------------------------------------------------
+ * DLCI statistics.
+ *	This structure is returned by the FR_READ_STATISTICS command when
+ *	dlci != 0.
+ */
+typedef struct	fr_dlci_stat
+{
+	unsigned long tx_frames		PACKED;	/* 00h:  */
+	unsigned long tx_bytes		PACKED;	/* 04h:  */
+	unsigned long rx_frames		PACKED;	/* 08h:  */
+	unsigned long rx_bytes		PACKED;	/* 0Ch:  */
+	unsigned long rx_dropped	PACKED;	/* 10h:  */
+	unsigned long rx_inactive	PACKED;	/* 14h:  */
+	unsigned long rx_exceed_CIR	PACKED;	/* 18h:  */
+	unsigned long rx_DE_set		PACKED;	/* 1Ch:  */
+	unsigned long tx_throughput	PACKED;	/* 20h:  */
+	unsigned long tx_calc_timer	PACKED;	/* 24h:  */
+	unsigned long rx_throughput	PACKED;	/* 28h:  */
+	unsigned long rx_calc_timer	PACKED;	/* 2Ch:  */
+} fr_dlci_stat_t;
+
+/*----------------------------------------------------------------------------
+ * Communications error statistics.
+ *	This structure is returned by the FR_READ_ERROR_STATS command.
+ */
+typedef struct	fr_comm_stat
+{
+	unsigned char rx_overruns	PACKED;	/* 00h:  */
+	unsigned char rx_bad_crc	PACKED;	/* 01h:  */
+	unsigned char rx_aborts		PACKED;	/* 02h:  */
+	unsigned char rx_too_long	PACKED;	/* 03h:  */
+	unsigned char tx_aborts		PACKED;	/* 04h:  */
+	unsigned char tx_underruns	PACKED;	/* 05h:  */
+	unsigned char tx_missed_undr	PACKED;	/* 06h:  */
+	unsigned char dcd_dropped	PACKED;	/* 07h:  */
+	unsigned char cts_dropped	PACKED;	/* 08h:  */
+} fr_comm_stat_t;
+
+/*----------------------------------------------------------------------------
+ * Defines for the FR_ISSUE_IS_FRAME command.
+ */
+#define	FR_ISF_LVE	2		/* issue Link Verification Enquiry */
+#define	FR_ISF_FSE	3		/* issue Full Status Enquiry */
+
+/*----------------------------------------------------------------------------
+ * Frame Relay ARP Header -- Used for Dynamic route creation with InvARP 
+ */
+
+typedef struct arphdr_fr
+	{
+	unsigned short ar_hrd PACKED;		/* format of hardware addr */
+	unsigned short ar_pro PACKED;		/* format of protocol addr */
+	unsigned char  ar_hln PACKED;		/* length of hardware addr */	
+	unsigned char  ar_pln PACKED;		/* length of protocol addr */
+	unsigned short ar_op  PACKED;		/* ARP opcode		   */
+	unsigned short ar_sha PACKED;		/* Sender DLCI addr 2 bytes */
+	unsigned long  ar_sip PACKED;		/* Sender IP   addr 4 bytes */
+	unsigned short ar_tha PACKED;		/* Target DLCI addr 2 bytes */
+	unsigned long  ar_tip PACKED;		/* Target IP   addr 4 bytes */
+	} arphdr_fr_t;
+
+/*----------------------------------------------------------------------------
+ * Frame Relay RFC 1490 SNAP Header -- Used to check for ARP packets
+ */
+typedef struct arphdr_1490
+	{
+	unsigned char control PACKED;		/* UI, etc...  */
+	unsigned char pad     PACKED;		/* Pad */
+	unsigned char NLPID   PACKED;		/* SNAP */
+	unsigned char OUI[3]  PACKED;		/* Ethertype, etc... */
+	unsigned short PID    PACKED;		/* ARP, IP, etc... */
+	}  arphdr_1490_t;
+
+/* UDP/IP packet (for UDP management) layout */
+
+/* The embedded control block for UDP mgmt
+   This is essentially a mailbox structure, without the large data field */
+
+typedef struct {
+        unsigned char  opp_flag PACKED; /* the opp flag */
+        unsigned char  command  PACKED; /* command code */
+        unsigned short length   PACKED; /* length of data buffer */
+        unsigned char  result   PACKED; /* return code */
+        unsigned short dlci     PACKED; /* DLCI number */
+        unsigned char  attr     PACKED; /* FECN, BECN, DE and C/R bits */
+        unsigned short rxlost1  PACKED; /* frames discarded at int. level */
+        unsigned long  rxlost2  PACKED; /* frames discarded at app. level */
+        unsigned char  rsrv[2]  PACKED; /* reserved for future use */
+} cblock_t;
+
+
+/* UDP management packet layout (data area of ip packet) */
+
+typedef struct {
+        unsigned char   control                 PACKED;
+        unsigned char   NLPID                   PACKED;
+} fr_encap_hdr_t;
+
+typedef struct {
+//	fr_encap_hdr_t 		fr_encap_hdr	PACKED;
+	ip_pkt_t 		ip_pkt		PACKED;
+	udp_pkt_t		udp_pkt		PACKED;
+	wp_mgmt_t 		wp_mgmt       	PACKED;
+        cblock_t                cblock          PACKED;
+        unsigned char           data[4080]      PACKED;
+} fr_udp_pkt_t;
+
+
+/* valid ip_protocol for UDP management */
+#define UDPMGMT_UDP_PROTOCOL 0x11
+
+#define UDPMGMT_FPIPE_SIGNATURE         "FPIPE8ND"
+#define UDPMGMT_DRVRSTATS_SIGNATURE     "DRVSTATS"
+
+/* values for request/reply byte */
+#define UDPMGMT_REQUEST	0x01
+#define UDPMGMT_REPLY	0x02
+#define UDP_OFFSET	12
+
+typedef struct {
+        unsigned long if_send_entry;
+        unsigned long if_send_skb_null;
+        unsigned long if_send_broadcast;
+        unsigned long if_send_multicast;
+        unsigned long if_send_critical_ISR;
+        unsigned long if_send_critical_non_ISR;
+        unsigned long if_send_busy;
+        unsigned long if_send_busy_timeout;
+	unsigned long if_send_DRVSTATS_request;
+        unsigned long if_send_FPIPE_request;
+        unsigned long if_send_wan_disconnected;
+        unsigned long if_send_dlci_disconnected;
+        unsigned long if_send_no_bfrs;
+        unsigned long if_send_adptr_bfrs_full;
+        unsigned long if_send_bfrs_passed_to_adptr;
+	unsigned long if_send_consec_send_fail;
+} drvstats_if_send_t; 
+
+typedef struct {
+        unsigned long rx_intr_no_socket;
+        unsigned long rx_intr_dev_not_started;
+        unsigned long rx_intr_DRVSTATS_request;
+        unsigned long rx_intr_FPIPE_request;
+        unsigned long rx_intr_bfr_not_passed_to_stack;
+        unsigned long rx_intr_bfr_passed_to_stack;
+ } drvstats_rx_intr_t;
+
+typedef struct {
+        unsigned long UDP_FPIPE_mgmt_kmalloc_err;
+        unsigned long UDP_FPIPE_mgmt_direction_err;
+        unsigned long UDP_FPIPE_mgmt_adptr_type_err;
+        unsigned long UDP_FPIPE_mgmt_adptr_cmnd_OK;
+        unsigned long UDP_FPIPE_mgmt_adptr_cmnd_timeout;
+        unsigned long UDP_FPIPE_mgmt_adptr_send_passed;
+        unsigned long UDP_FPIPE_mgmt_adptr_send_failed;
+        unsigned long UDP_FPIPE_mgmt_not_passed_to_stack;
+        unsigned long UDP_FPIPE_mgmt_passed_to_stack;
+        unsigned long UDP_FPIPE_mgmt_no_socket;
+        unsigned long UDP_DRVSTATS_mgmt_kmalloc_err;
+        unsigned long UDP_DRVSTATS_mgmt_adptr_cmnd_OK;
+        unsigned long UDP_DRVSTATS_mgmt_adptr_cmnd_timeout;
+        unsigned long UDP_DRVSTATS_mgmt_adptr_send_passed;
+        unsigned long UDP_DRVSTATS_mgmt_adptr_send_failed;
+        unsigned long UDP_DRVSTATS_mgmt_not_passed_to_stack;
+        unsigned long UDP_DRVSTATS_mgmt_passed_to_stack;
+        unsigned long UDP_DRVSTATS_mgmt_no_socket;
+} drvstats_gen_t;
+
+typedef struct {
+        unsigned char   attr      	PACKED;
+        unsigned short  time_stamp      PACKED;
+        unsigned char   reserved[13]    PACKED;
+} api_rx_hdr_t;
+
+typedef struct {
+        api_rx_hdr_t    api_rx_hdr      PACKED;
+        void *          data            PACKED;
+} api_rx_element_t;
+
+typedef struct {
+        unsigned char   attr            PACKED;
+        unsigned char   reserved[15]    PACKED;
+} api_tx_hdr_t;
+
+typedef struct {
+        api_tx_hdr_t    api_tx_hdr      PACKED;
+        void *          data            PACKED;
+} api_tx_element_t;
+
+#ifdef		_MSC_
+#  pragma	pack()
+#endif
+#endif	/* _SDLA_FR_H */
+
diff --git a/include/linux/sdla_ppp.h b/include/linux/sdla_ppp.h
new file mode 100644
index 000000000000..6f3923179c29
--- /dev/null
+++ b/include/linux/sdla_ppp.h
@@ -0,0 +1,575 @@
+/*****************************************************************************
+* sdla_ppp.h	Sangoma PPP firmware API definitions.
+*
+* Author:	Nenad Corbic	<ncorbic@sangoma.com>
+*
+* Copyright:	(c) 1995-1997 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Feb 24, 2000  Nenad Corbic    v2.1.2
+* Jan 06, 1997	Gene Kozin	v2.0
+* Apr 11, 1996	Gene Kozin	Initial version.
+*****************************************************************************/
+#ifndef	_SDLA_PPP_H
+#define	_SDLA_PPP_H
+
+/*----------------------------------------------------------------------------
+ * Notes:
+ * ------
+ * 1. All structures defined in this file are byte-alined.  
+ *
+ *	Compiler	Platform
+ *	--------	--------
+ *	GNU C		Linux		
+ */
+
+#ifndef	PACKED
+#    define	PACKED	__attribute__((packed))
+#endif	/* PACKED */
+
+/* Adapter memory layout and important constants */
+#define	PPP508_MB_VECT	0xE000	/* mailbox window vector */
+#define	PPP508_MB_OFFS	0		/* mailbox offset */
+#define	PPP508_FLG_OFFS	0x1000	/* status flags offset */
+#define	PPP508_BUF_OFFS	0x1100	/* buffer info block offset */
+#define PPP514_MB_OFFS  0xE000  /* mailbox offset */
+#define PPP514_FLG_OFFS 0xF000  /* status flags offset */
+#define PPP514_BUF_OFFS 0xF100  /* buffer info block offset */
+
+#define PPP_MAX_DATA	1008	/* command block data buffer length */
+
+/****** Data Structures *****************************************************/
+
+/*----------------------------------------------------------------------------
+ * PPP Command Block.
+ */
+typedef struct ppp_cmd{
+	unsigned char  command	PACKED;	/* command code */
+	unsigned short length	PACKED;	/* length of data buffer */
+	unsigned char  result	PACKED;	/* return code */
+	unsigned char  rsrv[11]	PACKED;	/* reserved for future use */
+} ppp_cmd_t;
+
+typedef struct cblock{
+	unsigned char  opp_flag	PACKED;
+	unsigned char  command	PACKED;	/* command code */
+	unsigned short length	PACKED;	/* length of data buffer */
+	unsigned char  result	PACKED;	/* return code */
+	unsigned char  rsrv[11]	PACKED;	/* reserved for future use */
+} cblock_t;
+
+typedef struct ppp_udp_pkt{
+	ip_pkt_t 	ip_pkt	PACKED;
+	udp_pkt_t	udp_pkt	PACKED;
+	wp_mgmt_t	wp_mgmt PACKED;
+	cblock_t	cblock  PACKED;
+	unsigned char   data[MAX_LGTH_UDP_MGNT_PKT] PACKED;
+} ppp_udp_pkt_t;	
+
+typedef struct {
+	unsigned char	status		PACKED;
+	unsigned char	data_avail	PACKED;
+	unsigned short	real_length	PACKED;
+	unsigned short	time_stamp	PACKED;
+	unsigned char	data[1]		PACKED;
+} trace_pkt_t;
+
+
+typedef struct {
+	unsigned char 	opp_flag	PACKED;
+	unsigned char	trace_type	PACKED;
+	unsigned short 	trace_length	PACKED;
+	unsigned short 	trace_data_ptr	PACKED;
+	unsigned short  trace_time_stamp PACKED;
+} trace_element_t;
+
+/* 'command' field defines */
+#define PPP_READ_CODE_VERSION	0x10	/* configuration commands */
+#define PPP_SET_CONFIG		0x05
+#define PPP_READ_CONFIG		0x06
+#define	PPP_SET_INTR_FLAGS	0x20
+#define	PPP_READ_INTR_FLAGS	0x21
+#define	PPP_SET_INBOUND_AUTH	0x30
+#define	PPP_SET_OUTBOUND_AUTH	0x31
+#define	PPP_GET_CONNECTION_INFO	0x32
+
+#define PPP_COMM_ENABLE		0x03	/* operational commands */
+#define PPP_COMM_DISABLE	0x04
+#define	PPP_SEND_SIGN_FRAME	0x23
+#define	PPP_READ_SIGN_RESPONSE	0x24
+#define	PPP_DATALINE_MONITOR	0x33
+
+#define PPP_READ_STATISTICS	0x07	/* statistics commands */
+#define PPP_FLUSH_STATISTICS	0x08
+#define PPP_READ_ERROR_STATS	0x09
+#define PPP_FLUSH_ERROR_STATS	0x0A
+#define PPP_READ_PACKET_STATS	0x12
+#define PPP_FLUSH_PACKET_STATS	0x13
+#define PPP_READ_LCP_STATS	0x14
+#define PPP_FLUSH_LCP_STATS	0x15
+#define PPP_READ_LPBK_STATS	0x16
+#define PPP_FLUSH_LPBK_STATS	0x17
+#define PPP_READ_IPCP_STATS	0x18
+#define PPP_FLUSH_IPCP_STATS	0x19
+#define PPP_READ_IPXCP_STATS	0x1A
+#define PPP_FLUSH_IPXCP_STATS	0x1B
+#define PPP_READ_PAP_STATS	0x1C
+#define PPP_FLUSH_PAP_STATS	0x1D
+#define PPP_READ_CHAP_STATS	0x1E
+#define PPP_FLUSH_CHAP_STATS	0x1F
+
+/* 'result' field defines */
+#define PPPRES_OK		0x00	/* command executed successfully */
+#define	PPPRES_INVALID_STATE	0x09	/* invalid command in this context */
+
+/*----------------------------------------------------------------------------
+ * PPP Mailbox.
+ *	This structure is located at offset PPP???_MB_OFFS into PPP???_MB_VECT
+ */
+typedef struct ppp_mbox
+{
+	unsigned char flag	PACKED;	/* 00h: command execution flag */
+	ppp_cmd_t     cmd	PACKED; /* 01h: command block */
+	unsigned char data[1]	PACKED;	/* 10h: variable length data buffer */
+} ppp_mbox_t;
+
+/*----------------------------------------------------------------------------
+ * PPP Status Flags.
+ *	This structure is located at offset PPP???_FLG_OFFS into
+ *	PPP???_MB_VECT.
+ */
+typedef struct	ppp_flags
+{
+	unsigned char iflag		PACKED;	/* 00: interrupt flag */
+	unsigned char imask		PACKED;	/* 01: interrupt mask */
+	unsigned char resrv		PACKED;
+	unsigned char mstatus		PACKED;	/* 03: modem status */
+	unsigned char lcp_state		PACKED; /* 04: LCP state */
+	unsigned char ppp_phase		PACKED;	/* 05: PPP phase */
+	unsigned char ip_state		PACKED; /* 06: IPCP state */
+	unsigned char ipx_state		PACKED; /* 07: IPXCP state */
+	unsigned char pap_state		PACKED; /* 08: PAP state */
+	unsigned char chap_state	PACKED; /* 09: CHAP state */
+	unsigned short disc_cause	PACKED;	/* 0A: disconnection cause */
+} ppp_flags_t;
+
+/* 'iflag' defines */
+#define	PPP_INTR_RXRDY		0x01	/* Rx ready */
+#define	PPP_INTR_TXRDY		0x02	/* Tx ready */
+#define	PPP_INTR_MODEM		0x04	/* modem status change (DCD, CTS) */
+#define	PPP_INTR_CMD		0x08	/* interface command completed */
+#define	PPP_INTR_DISC		0x10	/* data link disconnected */
+#define	PPP_INTR_OPEN		0x20	/* data link open */
+#define	PPP_INTR_DROP_DTR	0x40	/* DTR drop timeout expired */
+#define PPP_INTR_TIMER          0x80    /* timer interrupt */
+
+
+/* 'mstatus' defines */
+#define	PPP_MDM_DCD		0x08	/* mdm_status: DCD */
+#define	PPP_MDM_CTS		0x20	/* mdm_status: CTS */
+
+/* 'disc_cause' defines */
+#define PPP_LOCAL_TERMINATION   0x0001	/* Local Request by PPP termination phase */
+#define PPP_DCD_CTS_DROP        0x0002  /* DCD and/or CTS dropped. Link down */
+#define PPP_REMOTE_TERMINATION	0x0800	/* Remote Request by PPP termination phase */
+
+/* 'misc_config_bits' defines */
+#define DONT_RE_TX_ABORTED_I_FRAMES 	0x01
+#define TX_FRM_BYTE_COUNT_STATS         0x02
+#define RX_FRM_BYTE_COUNT_STATS         0x04
+#define TIME_STAMP_IN_RX_FRAMES         0x08
+#define NON_STD_ADPTR_FREQ              0x10
+#define INTERFACE_LEVEL_RS232           0x20
+#define AUTO_LINK_RECOVERY              0x100
+#define DONT_TERMINATE_LNK_MAX_CONFIG   0x200                    
+
+/* 'authentication options' defines */
+#define NO_AUTHENTICATION	0x00
+#define INBOUND_AUTH		0x80
+#define PAP_AUTH		0x01
+#define CHAP_AUTH		0x02		
+
+/* 'ip options' defines */
+#define L_AND_R_IP_NO_ASSIG	0x00
+#define L_IP_LOCAL_ASSIG    	0x01
+#define L_IP_REMOTE_ASSIG   	0x02
+#define R_IP_LOCAL_ASSIG        0x04
+#define R_IP_REMOTE_ASSIG       0x08
+#define ENABLE_IP		0x80
+
+/* 'ipx options' defines */
+#define ROUTING_PROT_DEFAULT    0x20
+#define ENABLE_IPX		0x80
+#define DISABLE_IPX		0x00
+
+/*----------------------------------------------------------------------------
+ * PPP Buffer Info.
+ *	This structure is located at offset PPP508_BUF_OFFS into
+ *	PPP508_MB_VECT.
+ */
+typedef struct	ppp508_buf_info
+{
+	unsigned short txb_num	PACKED;	/* 00: number of transmit buffers */
+	unsigned long  txb_ptr	PACKED;	/* 02: pointer to the buffer ctl. */
+	unsigned long  txb_nxt  PACKED;
+	unsigned char  rsrv1[22] PACKED;
+	unsigned short rxb_num	PACKED;	/* 20: number of receive buffers */
+	unsigned long  rxb_ptr	PACKED;	/* 22: pointer to the buffer ctl. */
+	unsigned long  rxb1_ptr	PACKED;	/* 26: pointer to the first buf.ctl. */
+	unsigned long  rxb_base	PACKED;	/* 2A: pointer to the buffer base */
+	unsigned char  rsrv2[2]	PACKED;
+	unsigned long  rxb_end	PACKED;	/* 30: pointer to the buffer end */
+} ppp508_buf_info_t;
+
+/*----------------------------------------------------------------------------
+ * Transmit/Receive Buffer Control Block.
+ */
+typedef struct	ppp_buf_ctl
+{
+	unsigned char  flag		PACKED;	/* 00: 'buffer ready' flag */
+	unsigned short length		PACKED;	/* 01: length of data */
+	unsigned char  reserved1[1]	PACKED;	/* 03: */
+	unsigned char  proto		PACKED;	/* 04: protocol */
+	unsigned short timestamp	PACKED;	/* 05: time stamp (Rx only) */
+	unsigned char  reserved2[5]	PACKED;	/* 07: */
+	union
+	{
+		unsigned short o_p[2];	/* 1C: buffer offset & page (S502) */
+		unsigned long  ptr;	/* 1C: buffer pointer (S508) */
+	} buf				PACKED;
+} ppp_buf_ctl_t;
+
+/*----------------------------------------------------------------------------
+ * S508 Adapter Configuration Block (passed to the PPP_SET_CONFIG command).
+ */
+typedef struct	ppp508_conf
+{
+	unsigned long  line_speed	PACKED;	/* 00: baud rate, bps */
+	unsigned short txbuf_percent	PACKED;	/* 04: % of Tx buffer */
+	unsigned short conf_flags	PACKED;	/* 06: configuration bits */
+	unsigned short mtu_local	PACKED;	/* 08: local MTU */
+	unsigned short mtu_remote	PACKED;	/* 0A: remote MTU */
+	unsigned short restart_tmr	PACKED;	/* 0C: restart timer */
+	unsigned short auth_rsrt_tmr	PACKED;	/* 0E: authentication timer */
+	unsigned short auth_wait_tmr	PACKED;	/* 10: authentication timer */
+	unsigned short mdm_fail_tmr	PACKED;	/* 12: modem failure timer */
+	unsigned short dtr_drop_tmr	PACKED;	/* 14: DTR drop timer */
+	unsigned short connect_tmout	PACKED;	/* 16: connection timeout */
+	unsigned short conf_retry	PACKED;	/* 18: max. retry */
+	unsigned short term_retry	PACKED;	/* 1A: max. retry */
+	unsigned short fail_retry	PACKED;	/* 1C: max. retry */
+	unsigned short auth_retry	PACKED;	/* 1E: max. retry */
+	unsigned char  auth_options	PACKED;	/* 20: authentication opt. */
+	unsigned char  ip_options	PACKED;	/* 21: IP options */
+	unsigned long  ip_local		PACKED;	/* 22: local IP address */
+	unsigned long  ip_remote	PACKED;	/* 26: remote IP address */
+	unsigned char  ipx_options	PACKED;	/* 2A: IPX options */
+	unsigned char  ipx_netno[4]	PACKED;	/* 2B: IPX net number */
+	unsigned char  ipx_local[6]	PACKED;	/* 2F: local IPX node number*/
+	unsigned char  ipx_remote[6]	PACKED;	/* 35: remote IPX node num.*/
+	unsigned char  ipx_router[48]	PACKED;	/* 3B: IPX router name*/
+	unsigned long  alt_cpu_clock	PACKED;	/* 6B:  */
+} ppp508_conf_t;
+
+/*----------------------------------------------------------------------------
+ * S508 Adapter Read Connection Information Block 
+ *    Returned by the PPP_GET_CONNECTION_INFO command
+ */
+typedef struct	ppp508_connect_info
+{
+	unsigned short 	mru		PACKED;	/* 00-01 Remote Max Rec' Unit */
+	unsigned char  	ip_options 	PACKED; /* 02: Negotiated ip options  */
+	unsigned long  	ip_local	PACKED;	/* 03-06: local IP address    */
+	unsigned long  	ip_remote	PACKED;	/* 07-0A: remote IP address   */
+	unsigned char	ipx_options	PACKED; /* 0B: Negotiated ipx options */
+	unsigned char  	ipx_netno[4]	PACKED;	/* 0C-0F: IPX net number      */
+	unsigned char  	ipx_local[6]	PACKED;	/* 10-1F: local IPX node #    */
+	unsigned char  	ipx_remote[6]	PACKED;	/* 16-1B: remote IPX node #   */
+	unsigned char  	ipx_router[48]	PACKED;	/* 1C-4B: IPX router name     */
+	unsigned char	auth_status	PACKED; /* 4C: Authentication Status  */
+	unsigned char 	inbd_auth_peerID[1] PACKED; /* 4D: variable length inbound authenticated peer ID */
+} ppp508_connect_info_t;
+
+/* 'line_speed' field */
+#define	PPP_BITRATE_1200	0x01
+#define	PPP_BITRATE_2400	0x02
+#define	PPP_BITRATE_4800	0x03
+#define	PPP_BITRATE_9600	0x04
+#define	PPP_BITRATE_19200	0x05
+#define	PPP_BITRATE_38400	0x06
+#define	PPP_BITRATE_45000	0x07
+#define	PPP_BITRATE_56000	0x08
+#define	PPP_BITRATE_64000	0x09
+#define	PPP_BITRATE_74000	0x0A
+#define	PPP_BITRATE_112000	0x0B
+#define	PPP_BITRATE_128000	0x0C
+#define	PPP_BITRATE_156000	0x0D
+
+/* Defines for the 'conf_flags' field */
+#define	PPP_IGNORE_TX_ABORT	0x01	/* don't re-transmit aborted frames */
+#define	PPP_ENABLE_TX_STATS	0x02	/* enable Tx statistics */
+#define	PPP_ENABLE_RX_STATS	0x04	/* enable Rx statistics */
+#define	PPP_ENABLE_TIMESTAMP	0x08	/* enable timestamp */
+
+/* 'ip_options' defines */
+#define	PPP_LOCAL_IP_LOCAL	0x01
+#define	PPP_LOCAL_IP_REMOTE	0x02
+#define	PPP_REMOTE_IP_LOCAL	0x04
+#define	PPP_REMOTE_IP_REMOTE	0x08
+
+/* 'ipx_options' defines */
+#define	PPP_REMOTE_IPX_NETNO	0x01
+#define	PPP_REMOTE_IPX_LOCAL	0x02
+#define	PPP_REMOTE_IPX_REMOTE	0x04
+#define	PPP_IPX_ROUTE_RIP_SAP	0x08
+#define	PPP_IPX_ROUTE_NLSP	0x10
+#define	PPP_IPX_ROUTE_DEFAULT	0x20
+#define	PPP_IPX_CONF_COMPLETE	0x40
+#define	PPP_IPX_ENABLE		0x80
+
+/*----------------------------------------------------------------------------
+ * S508 Adapter Configuration Block (returned by the PPP_READ_CONFIG command).
+ */
+typedef struct	ppp508_get_conf
+{
+	unsigned long  bps	PACKED;	/* 00: baud rate, bps */
+	ppp508_conf_t  conf	PACKED;	/* 04: requested config. */
+	unsigned short txb_num	PACKED;	/* 6F: number of Tx buffers */
+	unsigned short rxb_num	PACKED;	/* 71: number of Rx buffers */
+} ppp508_get_conf_t;
+
+/*----------------------------------------------------------------------------
+ * S508 Operational Statistics (returned by the PPP_READ_STATISTIC command).
+ */
+typedef struct ppp508_stats
+{
+	unsigned short reserved1	PACKED;	/* 00: */
+	unsigned short rx_bad_len	PACKED;	/* 02: */
+	unsigned short reserved2	PACKED;	/* 04: */
+	unsigned long  tx_frames	PACKED;	/* 06: */
+	unsigned long  tx_bytes	PACKED;	/* 0A: */
+	unsigned long  rx_frames	PACKED;	/* 0E: */
+	unsigned long  rx_bytes	PACKED;	/* 12: */
+} ppp508_stats_t;
+
+/*----------------------------------------------------------------------------
+ * Adapter Error Statistics (returned by the PPP_READ_ERROR_STATS command).
+ */
+typedef struct	ppp_err_stats
+{
+	unsigned char	 rx_overrun	PACKED;	/* 00: Rx overrun errors */
+	unsigned char	 rx_bad_crc	PACKED;	/* 01: Rx CRC errors */
+	unsigned char	 rx_abort	PACKED;	/* 02: Rx aborted frames */
+	unsigned char	 rx_lost	PACKED;	/* 03: Rx frames lost */
+	unsigned char	 tx_abort	PACKED;	/* 04: Tx aborted frames */
+	unsigned char	 tx_underrun	PACKED;	/* 05: Tx underrun errors */
+	unsigned char	 tx_missed_intr	PACKED;	/* 06: Tx underruns missed */
+	unsigned char	 reserved	PACKED;	/* 07: Tx underruns missed */
+	unsigned char	 dcd_trans	PACKED;	/* 08: DCD transitions */
+	unsigned char	 cts_trans	PACKED;	/* 09: CTS transitions */
+} ppp_err_stats_t;
+
+/*----------------------------------------------------------------------------
+ * Packet Statistics (returned by the PPP_READ_PACKET_STATS command).
+ */
+typedef struct	ppp_pkt_stats
+{
+	unsigned short rx_bad_header	PACKED;	/* 00: */
+	unsigned short rx_prot_unknwn	PACKED;	/* 02: */
+	unsigned short rx_too_large	PACKED;	/* 04: */
+	unsigned short rx_lcp		PACKED;	/* 06: */
+	unsigned short tx_lcp		PACKED;	/* 08: */
+	unsigned short rx_ipcp		PACKED;	/* 0A: */
+	unsigned short tx_ipcp		PACKED;	/* 0C: */
+	unsigned short rx_ipxcp		PACKED;	/* 0E: */
+	unsigned short tx_ipxcp		PACKED;	/* 10: */
+	unsigned short rx_pap		PACKED;	/* 12: */
+	unsigned short tx_pap		PACKED;	/* 14: */
+	unsigned short rx_chap		PACKED;	/* 16: */
+	unsigned short tx_chap		PACKED;	/* 18: */
+	unsigned short rx_lqr		PACKED;	/* 1A: */
+	unsigned short tx_lqr		PACKED;	/* 1C: */
+	unsigned short rx_ip		PACKED;	/* 1E: */
+	unsigned short tx_ip		PACKED;	/* 20: */
+	unsigned short rx_ipx		PACKED;	/* 22: */
+	unsigned short tx_ipx		PACKED;	/* 24: */
+} ppp_pkt_stats_t;
+
+/*----------------------------------------------------------------------------
+ * LCP Statistics (returned by the PPP_READ_LCP_STATS command).
+ */
+typedef struct	ppp_lcp_stats
+{
+	unsigned short rx_unknown	PACKED;	/* 00: unknown LCP type */
+	unsigned short rx_conf_rqst	PACKED;	/* 02: Configure-Request */
+	unsigned short rx_conf_ack	PACKED;	/* 04: Configure-Ack */
+	unsigned short rx_conf_nak	PACKED;	/* 06: Configure-Nak */
+	unsigned short rx_conf_rej	PACKED;	/* 08: Configure-Reject */
+	unsigned short rx_term_rqst	PACKED;	/* 0A: Terminate-Request */
+	unsigned short rx_term_ack	PACKED;	/* 0C: Terminate-Ack */
+	unsigned short rx_code_rej	PACKED;	/* 0E: Code-Reject */
+	unsigned short rx_proto_rej	PACKED;	/* 10: Protocol-Reject */
+	unsigned short rx_echo_rqst	PACKED;	/* 12: Echo-Request */
+	unsigned short rx_echo_reply	PACKED;	/* 14: Echo-Reply */
+	unsigned short rx_disc_rqst	PACKED;	/* 16: Discard-Request */
+	unsigned short tx_conf_rqst	PACKED;	/* 18: Configure-Request */
+	unsigned short tx_conf_ack	PACKED;	/* 1A: Configure-Ack */
+	unsigned short tx_conf_nak	PACKED;	/* 1C: Configure-Nak */
+	unsigned short tx_conf_rej	PACKED;	/* 1E: Configure-Reject */
+	unsigned short tx_term_rqst	PACKED;	/* 20: Terminate-Request */
+	unsigned short tx_term_ack	PACKED;	/* 22: Terminate-Ack */
+	unsigned short tx_code_rej	PACKED;	/* 24: Code-Reject */
+	unsigned short tx_proto_rej	PACKED;	/* 26: Protocol-Reject */
+	unsigned short tx_echo_rqst	PACKED;	/* 28: Echo-Request */
+	unsigned short tx_echo_reply	PACKED;	/* 2A: Echo-Reply */
+	unsigned short tx_disc_rqst	PACKED;	/* 2E: Discard-Request */
+	unsigned short rx_too_large	PACKED;	/* 30: packets too large */
+	unsigned short rx_ack_inval	PACKED;	/* 32: invalid Conf-Ack */
+	unsigned short rx_rej_inval	PACKED;	/* 34: invalid Conf-Reject */
+	unsigned short rx_rej_badid	PACKED;	/* 36: Conf-Reject w/bad ID */
+} ppp_lcp_stats_t;
+
+/*----------------------------------------------------------------------------
+ * Loopback Error Statistics (returned by the PPP_READ_LPBK_STATS command).
+ */
+typedef struct	ppp_lpbk_stats
+{
+	unsigned short conf_magic	PACKED;	/* 00:  */
+	unsigned short loc_echo_rqst	PACKED;	/* 02:  */
+	unsigned short rem_echo_rqst	PACKED;	/* 04:  */
+	unsigned short loc_echo_reply	PACKED;	/* 06:  */
+	unsigned short rem_echo_reply	PACKED;	/* 08:  */
+	unsigned short loc_disc_rqst	PACKED;	/* 0A:  */
+	unsigned short rem_disc_rqst	PACKED;	/* 0C:  */
+	unsigned short echo_tx_collsn	PACKED;	/* 0E:  */
+	unsigned short echo_rx_collsn	PACKED;	/* 10:  */
+} ppp_lpbk_stats_t;
+
+/*----------------------------------------------------------------------------
+ * Protocol Statistics (returned by the PPP_READ_IPCP_STATS and
+ * PPP_READ_IPXCP_STATS commands).
+ */
+typedef struct	ppp_prot_stats
+{
+	unsigned short rx_unknown	PACKED;	/* 00: unknown type */
+	unsigned short rx_conf_rqst	PACKED;	/* 02: Configure-Request */
+	unsigned short rx_conf_ack	PACKED;	/* 04: Configure-Ack */
+	unsigned short rx_conf_nak	PACKED;	/* 06: Configure-Nak */
+	unsigned short rx_conf_rej	PACKED;	/* 08: Configure-Reject */
+	unsigned short rx_term_rqst	PACKED;	/* 0A: Terminate-Request */
+	unsigned short rx_term_ack	PACKED;	/* 0C: Terminate-Ack */
+	unsigned short rx_code_rej	PACKED;	/* 0E: Code-Reject */
+	unsigned short reserved		PACKED;	/* 10: */
+	unsigned short tx_conf_rqst	PACKED;	/* 12: Configure-Request */
+	unsigned short tx_conf_ack	PACKED;	/* 14: Configure-Ack */
+	unsigned short tx_conf_nak	PACKED;	/* 16: Configure-Nak */
+	unsigned short tx_conf_rej	PACKED;	/* 18: Configure-Reject */
+	unsigned short tx_term_rqst	PACKED;	/* 1A: Terminate-Request */
+	unsigned short tx_term_ack	PACKED;	/* 1C: Terminate-Ack */
+	unsigned short tx_code_rej	PACKED;	/* 1E: Code-Reject */
+	unsigned short rx_too_large	PACKED;	/* 20: packets too large */
+	unsigned short rx_ack_inval	PACKED;	/* 22: invalid Conf-Ack */
+	unsigned short rx_rej_inval	PACKED;	/* 24: invalid Conf-Reject */
+	unsigned short rx_rej_badid	PACKED;	/* 26: Conf-Reject w/bad ID */
+} ppp_prot_stats_t;
+
+/*----------------------------------------------------------------------------
+ * PAP Statistics (returned by the PPP_READ_PAP_STATS command).
+ */
+typedef struct	ppp_pap_stats
+{
+	unsigned short rx_unknown	PACKED;	/* 00: unknown type */
+	unsigned short rx_auth_rqst	PACKED;	/* 02: Authenticate-Request */
+	unsigned short rx_auth_ack	PACKED;	/* 04: Authenticate-Ack */
+	unsigned short rx_auth_nak	PACKED;	/* 06: Authenticate-Nak */
+	unsigned short reserved		PACKED;	/* 08: */
+	unsigned short tx_auth_rqst	PACKED;	/* 0A: Authenticate-Request */
+	unsigned short tx_auth_ack	PACKED;	/* 0C: Authenticate-Ack */
+	unsigned short tx_auth_nak	PACKED;	/* 0E: Authenticate-Nak */
+	unsigned short rx_too_large	PACKED;	/* 10: packets too large */
+	unsigned short rx_bad_peerid	PACKED;	/* 12: invalid peer ID */
+	unsigned short rx_bad_passwd	PACKED;	/* 14: invalid password */
+} ppp_pap_stats_t;
+
+/*----------------------------------------------------------------------------
+ * CHAP Statistics (returned by the PPP_READ_CHAP_STATS command).
+ */
+typedef struct	ppp_chap_stats
+{
+	unsigned short rx_unknown	PACKED;	/* 00: unknown type */
+	unsigned short rx_challenge	PACKED;	/* 02: Authenticate-Request */
+	unsigned short rx_response	PACKED;	/* 04: Authenticate-Ack */
+	unsigned short rx_success	PACKED;	/* 06: Authenticate-Nak */
+	unsigned short rx_failure	PACKED;	/* 08: Authenticate-Nak */
+	unsigned short reserved		PACKED;	/* 0A: */
+	unsigned short tx_challenge	PACKED;	/* 0C: Authenticate-Request */
+	unsigned short tx_response	PACKED;	/* 0E: Authenticate-Ack */
+	unsigned short tx_success	PACKED;	/* 10: Authenticate-Nak */
+	unsigned short tx_failure	PACKED;	/* 12: Authenticate-Nak */
+	unsigned short rx_too_large	PACKED;	/* 14: packets too large */
+	unsigned short rx_bad_peerid	PACKED;	/* 16: invalid peer ID */
+	unsigned short rx_bad_passwd	PACKED;	/* 18: invalid password */
+	unsigned short rx_bad_md5	PACKED;	/* 1A: invalid MD5 format */
+	unsigned short rx_bad_resp	PACKED;	/* 1C: invalid response */
+} ppp_chap_stats_t;
+
+/*----------------------------------------------------------------------------
+ * Connection Information (returned by the PPP_GET_CONNECTION_INFO command).
+ */
+typedef struct	ppp_conn_info
+{
+	unsigned short remote_mru	PACKED;	/* 00:  */
+	unsigned char  ip_options	PACKED;	/* 02:  */
+	unsigned char  ip_local[4]	PACKED;	/* 03:  */
+	unsigned char  ip_remote[4]	PACKED;	/* 07:  */
+	unsigned char  ipx_options	PACKED;	/* 0B:  */
+	unsigned char  ipx_network[4]	PACKED;	/* 0C:  */
+	unsigned char  ipx_local[6]	PACKED;	/* 10:  */
+	unsigned char  ipx_remote[6]	PACKED;	/* 16:  */
+	unsigned char  ipx_router[48]	PACKED;	/* 1C:  */
+	unsigned char  auth_status	PACKED;	/* 4C:  */
+	unsigned char  peer_id[0]	PACKED;	/* 4D:  */
+} ppp_conn_info_t;
+
+/* Data structure for SET_TRIGGER_INTR command
+ */
+
+typedef struct ppp_intr_info{
+	unsigned char  i_enable		PACKED; /* 0 Interrupt enable bits */
+	unsigned char  irq              PACKED; /* 1 Irq number */
+	unsigned short timer_len        PACKED; /* 2 Timer delay */
+} ppp_intr_info_t;
+
+
+#define FT1_MONITOR_STATUS_CTRL                         0x80
+#define SET_FT1_MODE                                    0x81
+
+
+
+/* Special UDP drivers management commands */
+#define PPIPE_ENABLE_TRACING                            0x20
+#define PPIPE_DISABLE_TRACING                           0x21
+#define PPIPE_GET_TRACE_INFO                            0x22
+#define PPIPE_GET_IBA_DATA                              0x23
+#define PPIPE_KILL_BOARD     				0x24
+#define PPIPE_FT1_READ_STATUS                           0x25
+#define PPIPE_DRIVER_STAT_IFSEND                        0x26
+#define PPIPE_DRIVER_STAT_INTR                          0x27
+#define PPIPE_DRIVER_STAT_GEN                           0x28
+#define PPIPE_FLUSH_DRIVER_STATS                        0x29
+#define PPIPE_ROUTER_UP_TIME                            0x30
+
+#define DISABLE_TRACING 				0x00
+#define TRACE_SIGNALLING_FRAMES				0x01
+#define TRACE_DATA_FRAMES				0x02
+
+
+
+#ifdef		_MSC_
+#  pragma	pack()
+#endif
+#endif	/* _SDLA_PPP_H */
diff --git a/include/linux/sdla_x25.h b/include/linux/sdla_x25.h
new file mode 100644
index 000000000000..57db980e27ad
--- /dev/null
+++ b/include/linux/sdla_x25.h
@@ -0,0 +1,772 @@
+/*****************************************************************************
+* sdla_x25.h	Sangoma X.25 firmware API definitions.
+*
+* Author:	Nenad Corbic	<ncorbic@sangoma.com>
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Feb 28, 2000  Nenad Corbic    Updated for socket based x25api
+* Dec 13, 1996	Gene Kozin	Initial version
+*****************************************************************************/
+#ifndef	_SDLA_X25_H
+#define	_SDLA_X25_H
+
+/*----------------------------------------------------------------------------
+ * Notes:
+ * ------
+ * 1. All structures defined in this file are byte-alined.  
+ *	Compiler	Platform	
+ *	--------	--------
+ *	GNU C		Linux
+ *
+ */
+
+#ifndef	PACKED
+#	define	PACKED	__attribute__((packed))
+#endif	/* PACKED */
+
+/******	CONSTANTS DEFINITIONS ***********************************************/
+
+#define	X25_MAX_CHAN	255	/* max number of open X.25 circuits */
+#define	X25_MAX_DATA	1024	/* max length of X.25 data buffer */
+/*
+ * X.25 shared memory layout.
+ */
+#define	X25_MBOX_OFFS	0x16B0	/* general mailbox block */
+#define	X25_RXMBOX_OFFS	0x1AD0	/* receive mailbox */
+#define	X25_STATUS_OFFS	0x1EF0	/* X.25 status structure */
+#define X25_MB_VECTOR	0xE000	/* S514 mailbox window vecotr */
+#define X25_MISC_HDLC_BITS 0x1F00 /*X.25 miscallaneous HDLC bits */
+
+/* code levels */
+#define HDLC_LEVEL 0x01
+#define X25_LEVEL  0x02
+#define X25_AND_HDLC_LEVEL 0x03
+#define DO_HDLC_LEVEL_ERROR_CHECKING 0x04
+
+/****** DATA STRUCTURES *****************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25 Command Block.
+ */
+typedef struct X25Cmd
+{
+	unsigned char command	PACKED;	/* command code */
+	unsigned short length	PACKED;	/* transfer data length */
+	unsigned char result	PACKED;	/* return code */
+	unsigned char pf	PACKED;	/* P/F bit */
+	unsigned short lcn	PACKED;	/* logical channel */
+	unsigned char qdm	PACKED;	/* Q/D/M bits */
+	unsigned char cause	PACKED;	/* cause field */
+	unsigned char diagn	PACKED;	/* diagnostics */
+	unsigned char pktType	PACKED;	/* packet type */
+	unsigned char resrv[4]	PACKED;	/* reserved */
+} TX25Cmd;
+
+/*
+ * Defines for the 'command' field.
+ */
+/*----- General commands --------------*/
+#define X25_SET_GLOBAL_VARS	0x0B   	/* set global variables */ 
+#define X25_READ_MODEM_STATUS	0x0C 	/* read modem status */
+#define X25_READ_CODE_VERSION	0x15	/* read firmware version number */
+#define X25_TRACE_CONFIGURE	0x14	/* configure trace facility */
+#define X25_READ_TRACE_DATA	0x16	/* read trace data */
+#define	X25_SET_INTERRUPT_MODE	0x17	/* set interrupt generation mode */
+#define	X25_READ_INTERRUPT_MODE	0x18	/* read interrupt generation mode */
+/*----- HDLC-level commands -----------*/
+#define X25_HDLC_LINK_CONFIGURE	0x01	/* configure HDLC link level */   
+#define X25_HDLC_LINK_OPEN	0x02	/* open HDLC link */         	
+#define X25_HDLC_LINK_CLOSE	0x03	/* close HDLC link */
+#define X25_HDLC_LINK_SETUP	0x04	/* set up HDLC link */ 
+#define X25_HDLC_LINK_DISC	0x05	/* disconnect DHLC link */
+#define X25_HDLC_LINK_STATUS	0x06	/* read DHLC link status */
+#define X25_HDLC_READ_STATS	0x07	/* read operational statistics */
+#define X25_HDLC_FLUSH_STATS	0x08 	/* flush operational statistics */
+#define X25_HDLC_READ_COMM_ERR	0x09 	/* read error statistics */
+#define X25_HDLC_FLUSH_COMM_ERR	0x0A	/* flush error statistics */
+#define X25_HDLC_FLUSH_BUFFERS	0x0D	/* flush HDLC-level data buffers */
+#define X25_HDLC_SPRVS_CNT_STAT 0x0F	/* read surervisory count status */
+#define X25_HDLC_SEND_UI_FRAME	0x10	/* send unnumbered information frame */
+#define X25_HDLC_WRITE		0x11	/* send HDLC information frame */
+#define X25_HDLC_READ		0x21	/* read HDLC information frame */
+#define X25_HDLC_READ_CONFIG	0x12	/* read HDLC configuration */
+#define X25_HDLC_SET_CONFIG	0x13	/* set HDLC configuration */
+#define SET_PROTOCOL_LEVEL	0x1F	/* set protocol level */
+/*----- X.25-level commands -----------*/
+#define X25_READ		0x22	/* read X.25 packet */
+#define X25_WRITE		0x23	/* send X.25 packet */
+#define X25_PLACE_CALL		0x30	/* place a call on SVC */
+#define X25_ACCEPT_CALL		0x31	/* accept incomming call */
+#define X25_CLEAR_CALL		0x32	/* clear call */
+#define X25_CLEAR_CONFRM	0x33	/* send clear confirmation packet */
+#define X25_RESET		0x34	/* send reset request packet */
+#define X25_RESET_CONFRM	0x35	/* send reset confirmation packet */
+#define X25_RESTART		0x36	/* send restart request packet */
+#define X25_RESTART_CONFRM	0x37	/* send restart confirmation packet */
+#define X25_INTERRUPT		0x38	/* send interrupt request packet */
+#define X25_INTERRUPT_CONFRM	0x39	/* send interrupt confirmation pkt */
+#define X25_REGISTRATION_RQST	0x3A	/* send registration request packet */
+#define X25_REGISTRATION_CONFRM	0x3B	/* send registration confirmation */
+#define X25_IS_DATA_AVAILABLE	0x40	/* querry receive queue */
+#define X25_INCOMMING_CALL_CTL	0x41	/* select incomming call options */
+#define X25_CONFIGURE_PVC	0x42	/* configure PVC */
+#define X25_GET_ACTIVE_CHANNELS	0x43	/* get a list of active circuits */
+#define X25_READ_CHANNEL_CONFIG	0x44	/* read virt. circuit configuration */
+#define X25_FLUSH_DATA_BUFFERS	0x45	/* flush X.25-level data buffers */
+#define X25_READ_HISTORY_TABLE	0x46	/* read asynchronous event log */
+#define X25_HISTORY_TABLE_CTL	0x47	/* control asynchronous event log */
+#define	X25_GET_TX_D_BIT_STATUS	0x48	/* is packet with D-bit acknowleged */
+#define	X25_READ_STATISTICS	0x49	/* read X.25-level statistics */
+#define	X25_FLUSH_STATISTICS	0x4A	/* flush X.25-level statistics */
+#define	X25_READ_CONFIGURATION	0x50	/* read HDLC & X.25 configuration */
+#define	X25_SET_CONFIGURATION	0x51	/* set HDLC & X.25 configuration */
+
+/*
+ * Defines for the 'result' field.
+ */
+/*----- General results ---------------*/
+#define X25RES_OK		0x00
+#define X25RES_ERROR		0x01
+#define X25RES_LINK_NOT_IN_ABM	0x02	/* link is not in ABM mode */
+#define X25RES_LINK_CLOSED	0x03
+#define X25RES_INVAL_LENGTH	0x04
+#define X25RES_INVAL_CMD	0x05
+#define X25RES_UNNUMBERED_FRAME	0x06	/* unnunbered frame received */
+#define X25RES_FRM_REJECT_MODE	0x07	/* link is in Frame Reject mode */
+#define X25RES_MODEM_FAILURE	0x08	/* DCD and/or CTS dropped */
+#define X25RES_N2_RETRY_LIMIT	0x09	/* N2 retry limit has been exceeded */
+#define X25RES_INVAL_LCN	0x30	/* invalid logical channel number */
+#define X25RES_INVAL_STATE	0x31	/* channel is not in data xfer mode */
+#define X25RES_INVAL_DATA_LEN	0x32	/* invalid data length */
+#define X25RES_NOT_READY	0x33	/* no data available / buffers full */
+#define X25RES_NETWORK_DOWN	0x34
+#define X25RES_CHANNEL_IN_USE	0x35	/* there is data queued on this LCN */
+#define X25RES_REGST_NOT_SUPPRT	0x36	/* registration not supported */
+#define X25RES_INVAL_FORMAT	0x37	/* invalid packet format */
+#define X25RES_D_BIT_NOT_SUPPRT	0x38	/* D-bit pragmatics not supported */
+#define X25RES_FACIL_NOT_SUPPRT	0x39	/* Call facility not supported */
+#define X25RES_INVAL_CALL_ARG	0x3A	/* errorneous call arguments */
+#define X25RES_INVAL_CALL_DATA	0x3B	/* errorneous call user data */
+#define X25RES_ASYNC_PACKET	0x40	/* asynchronous packet received */
+#define X25RES_PROTO_VIOLATION	0x41	/* protocol violation occurred */
+#define X25RES_PKT_TIMEOUT	0x42	/* X.25 packet time out */
+#define X25RES_PKT_RETRY_LIMIT	0x43	/* X.25 packet retry limit exceeded */
+/*----- Command-dependent results -----*/
+#define X25RES_LINK_DISC	0x00	/* HDLC_LINK_STATUS */
+#define X25RES_LINK_IN_ABM	0x01	/* HDLC_LINK_STATUS */
+#define X25RES_NO_DATA		0x01	/* HDLC_READ/READ_TRACE_DATA*/
+#define X25RES_TRACE_INACTIVE	0x02	/* READ_TRACE_DATA */
+#define X25RES_LINK_IS_OPEN	0x01	/* HDLC_LINK_OPEN */
+#define X25RES_LINK_IS_DISC	0x02	/* HDLC_LINK_DISC */
+#define X25RES_LINK_IS_CLOSED	0x03	/* HDLC_LINK_CLOSE */
+#define X25RES_INVAL_PARAM	0x31	/* INCOMMING_CALL_CTL */
+#define X25RES_INVAL_CONFIG	0x35	/* REGISTR_RQST/CONFRM */
+
+/*
+ * Defines for the 'qdm_bits' field.
+ */
+#define X25CMD_Q_BIT_MASK	0x04
+#define X25CMD_D_BIT_MASK	0x02
+#define X25CMD_M_BIT_MASK	0x01
+
+/*
+ * Defines for the 'pkt_type' field.
+ */
+/*----- Asynchronous events ------*/
+#define ASE_CLEAR_RQST		0x02
+#define ASE_RESET_RQST		0x04
+#define ASE_RESTART_RQST	0x08
+#define ASE_INTERRUPT		0x10
+#define ASE_DTE_REGISTR_RQST	0x20
+#define ASE_CALL_RQST		0x30
+#define ASE_CALL_ACCEPTED	0x31
+#define ASE_CLEAR_CONFRM	0x32
+#define ASE_RESET_CONFRM	0x33
+#define ASE_RESTART_CONFRM	0x34
+#define ASE_INTERRUPT_CONFRM	0x35
+#define ASE_DCE_REGISTR_CONFRM	0x36
+#define ASE_DIAGNOSTIC		0x37
+#define ASE_CALL_AUTO_CLEAR	0x38
+#define AUTO_RESPONSE_FLAG	0x80
+/*----- Time-Out events ----------*/
+#define TOE_RESTART_RQST	0x03
+#define TOE_CALL_RQST		0x05
+#define TOE_CLEAR_RQST		0x08
+#define TOE_RESET_RQST		0x0A
+/*----- Protocol Violation events */
+#define PVE_CLEAR_RQST		0x32
+#define PVE_RESET_RQST		0x33
+#define PVE_RESTART_RQST	0x34
+#define PVE_DIAGNOSTIC		0x37
+
+#define INTR_ON_RX_FRAME            0x01
+#define INTR_ON_TX_FRAME            0x02
+#define INTR_ON_MODEM_STATUS_CHANGE 0x04
+#define INTR_ON_COMMAND_COMPLETE    0x08
+#define INTR_ON_X25_ASY_TRANSACTION 0x10
+#define INTR_ON_TIMER		    0x40
+#define DIRECT_RX_INTR_USAGE        0x80
+
+#define NO_INTR_PENDING  	        0x00
+#define RX_INTR_PENDING			0x01	
+#define TX_INTR_PENDING			0x02
+#define MODEM_INTR_PENDING		0x04
+#define COMMAND_COMPLETE_INTR_PENDING 	0x08
+#define X25_ASY_TRANS_INTR_PENDING	0x10
+#define TIMER_INTR_PENDING		0x40
+
+/*----------------------------------------------------------------------------
+ * X.25 Mailbox.
+ *	This structure is located at offsets X25_MBOX_OFFS and X25_RXMBOX_OFFS
+ *	into shared memory window.
+ */
+typedef struct X25Mbox
+{
+	unsigned char opflag	PACKED;	/* 00h: execution flag */
+	TX25Cmd cmd		PACKED;	/* 01h: command block */
+	unsigned char data[1]	PACKED;	/* 10h: data buffer */
+} TX25Mbox;
+
+/*----------------------------------------------------------------------------
+ * X.25 Time Stamp Structure.
+ */
+typedef struct X25TimeStamp
+{
+	unsigned char month	PACKED;
+	unsigned char date	PACKED;
+	unsigned char sec	PACKED;
+	unsigned char min	PACKED;
+	unsigned char hour	PACKED;
+} TX25TimeStamp;
+
+/*----------------------------------------------------------------------------
+ * X.25 Status Block.
+ *	This structure is located at offset X25_STATUS_OFF into shared memory
+ *	window.
+ */
+typedef struct X25Status
+{
+	unsigned short pvc_map	PACKED;	/* 00h: PVC map */
+	unsigned short icc_map	PACKED;	/* 02h: Incomming Chan. map */
+	unsigned short twc_map	PACKED;	/* 04h: Two-way Cnan. map */
+	unsigned short ogc_map	PACKED;	/* 06h: Outgoing Chan. map */
+	TX25TimeStamp tstamp	PACKED;	/* 08h: timestamp (BCD) */
+	unsigned char iflags	PACKED;	/* 0Dh: interrupt flags */
+	unsigned char imask     PACKED; /* 0Eh: interrupt mask  */
+	unsigned char resrv	PACKED;	/* 0Eh: */
+	unsigned char gflags	PACKED;	/* 10h: misc. HDLC/X25 flags */
+	unsigned char cflags[X25_MAX_CHAN] PACKED; /* channel status bytes */
+} TX25Status;
+
+/*
+ * Bitmasks for the 'iflags' field.
+ */
+#define X25_RX_INTR	0x01	/* receive interrupt */
+#define X25_TX_INTR	0x02	/* transmit interrupt */
+#define X25_MODEM_INTR	0x04	/* modem status interrupt (CTS/DCD) */
+#define X25_EVENT_INTR	0x10	/* asyncronous event encountered */
+#define X25_CMD_INTR	0x08	/* interface command complete */
+
+/*
+ * Bitmasks for the 'gflags' field.
+ */
+#define X25_HDLC_ABM	0x01	/* HDLC is in ABM mode */
+#define X25_RX_READY	0x02	/* X.25 data available */
+#define X25_TRACE_READY	0x08	/* trace data available */
+#define X25_EVENT_IND	0x20	/* asynchronous event indicator */
+#define X25_TX_READY	0x40	/* space is available in Tx buf.*/
+
+/*
+ * Bitmasks for the 'cflags' field.
+ */
+#define X25_XFER_MODE	0x80	/* channel is in data transfer mode */
+#define X25_TXWIN_OPEN	0x40	/* transmit window open */
+#define X25_RXBUF_MASK	0x3F	/* number of data buffers available */
+
+/*****************************************************************************
+ * Following definitions structurize contents of the TX25Mbox.data field for
+ * different X.25 interface commands.
+ ****************************************************************************/
+
+/* ---------------------------------------------------------------------------
+ * X25_SET_GLOBAL_VARS Command.
+ */
+typedef struct X25GlobalVars
+{
+	unsigned char resrv	PACKED;	/* 00h: reserved */
+	unsigned char dtrCtl	PACKED;	/* 01h: DTR control code */
+	unsigned char resErr	PACKED;	/* 01h: '1' - reset modem error */
+} TX25GlobalVars;
+
+/*
+ * Defines for the 'dtrCtl' field.
+ */
+#define X25_RAISE_DTR	0x01
+#define X25_DROP_DTR	0x02
+
+/* ---------------------------------------------------------------------------
+ * X25_READ_MODEM_STATUS Command.
+ */
+typedef struct X25ModemStatus
+{
+	unsigned char	status	PACKED;		/* 00h: modem status */
+} TX25ModemStatus;
+
+/*
+ * Defines for the 'status' field.
+ */
+#define X25_CTS_MASK	0x20
+#define X25_DCD_MASK	0x08
+
+/* ---------------------------------------------------------------------------
+ * X25_HDLC_LINK_STATUS Command.
+ */
+typedef struct X25LinkStatus
+{
+	unsigned char txQueued	PACKED;	/* 00h: queued Tx I-frames*/
+	unsigned char rxQueued	PACKED;	/* 01h: queued Rx I-frames*/
+	unsigned char station	PACKED;	/* 02h: DTE/DCE config. */
+	unsigned char reserved	PACKED;	/* 03h: reserved */
+	unsigned char sfTally	PACKED;	/* 04h: supervisory frame tally */
+} TX25LinkStatus;
+
+/*
+ * Defines for the 'station' field.
+ */
+#define	X25_STATION_DTE	0x01	/* station configured as DTE */
+#define X25_STATION_DCE	0x02	/* station configured as DCE */
+
+/* ---------------------------------------------------------------------------
+ * X25_HDLC_READ_STATS Command.
+ */
+typedef struct HdlcStats
+{						/*	a number of ... */
+	unsigned short rxIFrames	PACKED;	/* 00h: ready Rx I-frames */
+	unsigned short rxNoseq		PACKED;	/* 02h: frms out-of-sequence */
+	unsigned short rxNodata		PACKED;	/* 04h: I-frms without data */
+	unsigned short rxDiscarded	PACKED;	/* 06h: discarded frames */
+	unsigned short rxTooLong	PACKED;	/* 08h: frames too long */
+	unsigned short rxBadAddr	PACKED;	/* 0Ah: frms with inval.addr*/
+	unsigned short txAcked		PACKED;	/* 0Ch: acknowledged I-frms */
+	unsigned short txRetransm	PACKED;	/* 0Eh: re-transmit. I-frms */
+	unsigned short t1Timeout	PACKED;	/* 10h: T1 timeouts */
+	unsigned short rxSABM		PACKED;	/* 12h: received SABM frames */
+	unsigned short rxDISC		PACKED;	/* 14h: received DISC frames */
+	unsigned short rxDM		PACKED;	/* 16h: received DM frames */
+	unsigned short rxFRMR		PACKED;	/* 18h: FRMR frames received */
+	unsigned short txSABM		PACKED;	/* 1Ah: transm. SABM frames*/
+	unsigned short txDISC		PACKED;	/* 1Ch: transm. DISC frames*/
+	unsigned short txDM		PACKED;	/* 1Eh: transm. DM frames */
+	unsigned short txFRMR		PACKED;	/* 20h: transm. FRMR frames*/
+} THdlcStats;
+
+/* ---------------------------------------------------------------------------
+ * X25_HDLC_READ_COMM_ERR Command.
+ */
+typedef struct HdlcCommErr
+{						/*	a number of ... */
+	unsigned char rxOverrun		PACKED;	/* 00h: Rx overrun errors */
+	unsigned char rxBadCrc		PACKED;	/* 01h: Rx CRC errors */
+	unsigned char rxAborted		PACKED;	/* 02h: Rx aborted frames */
+	unsigned char rxDropped		PACKED;	/* 03h: frames lost */
+	unsigned char txAborted		PACKED;	/* 04h: Tx aborted frames */
+	unsigned char txUnderrun	PACKED;	/* 05h: Tx underrun errors */
+	unsigned char txMissIntr	PACKED;	/* 06h: missed underrun ints */
+	unsigned char reserved		PACKED;	/* 07h: reserved */
+	unsigned char droppedDCD	PACKED;	/* 08h: times DCD dropped */
+	unsigned char droppedCTS	PACKED;	/* 09h: times CTS dropped */
+} THdlcCommErr;
+
+/* ---------------------------------------------------------------------------
+ * X25_SET_CONFIGURATION & X25_READ_CONFIGURATION Commands.
+ */
+typedef struct X25Config
+{
+unsigned char baudRate		PACKED;	/* 00h:  */
+	unsigned char t1		PACKED;	/* 01h:  */
+	unsigned char t2		PACKED;	/* 02h:  */
+	unsigned char n2		PACKED;	/* 03h:  */
+	unsigned short hdlcMTU		PACKED;	/* 04h:  */
+	unsigned char hdlcWindow	PACKED;	/* 06h:  */
+	unsigned char t4		PACKED;	/* 07h:  */
+	unsigned char autoModem		PACKED;	/* 08h:  */
+	unsigned char autoHdlc		PACKED;	/* 09h:  */
+	unsigned char hdlcOptions	PACKED;	/* 0Ah:  */
+	unsigned char station		PACKED;	/* 0Bh:  */
+	unsigned char pktWindow		PACKED;	/* 0Ch:  */
+	unsigned short defPktSize	PACKED;	/* 0Dh:  */
+	unsigned short pktMTU		PACKED;	/* 0Fh:  */
+	unsigned short loPVC		PACKED;	/* 11h:  */
+	unsigned short hiPVC		PACKED;	/* 13h:  */
+	unsigned short loIncommingSVC	PACKED;	/* 15h:  */
+	unsigned short hiIncommingSVC	PACKED;	/* 17h:  */
+	unsigned short loTwoWaySVC	PACKED;	/* 19h:  */
+	unsigned short hiTwoWaySVC	PACKED;	/* 1Bh:  */
+	unsigned short loOutgoingSVC	PACKED;	/* 1Dh:  */
+	unsigned short hiOutgoingSVC	PACKED;	/* 1Fh:  */
+	unsigned short options		PACKED;	/* 21h:  */
+	unsigned char responseOpt	PACKED;	/* 23h:  */
+	unsigned short facil1		PACKED;	/* 24h:  */
+	unsigned short facil2		PACKED;	/* 26h:  */
+	unsigned short ccittFacil	PACKED;	/* 28h:  */
+	unsigned short otherFacil	PACKED;	/* 2Ah:  */
+	unsigned short ccittCompat	PACKED;	/* 2Ch:  */
+	unsigned char t10t20		PACKED;	/* 2Eh:  */
+	unsigned char t11t21		PACKED;	/* 2Fh:  */
+	unsigned char t12t22		PACKED;	/* 30h:  */
+	unsigned char t13t23		PACKED;	/* 31h:  */
+	unsigned char t16t26		PACKED;	/* 32H:  */
+	unsigned char t28		PACKED;	/* 33h:  */
+	unsigned char r10r20		PACKED;	/* 34h:  */
+	unsigned char r12r22		PACKED;	/* 35h:  */
+	unsigned char r13r23		PACKED;	/* 36h:  */
+} TX25Config;
+
+/* ---------------------------------------------------------------------------
+ * X25_READ_CHANNEL_CONFIG Command.
+ */
+typedef struct X25ChanAlloc			/*----- Channel allocation -*/
+{
+	unsigned short loPVC		PACKED;	/* 00h: lowest PVC number */
+	unsigned short hiPVC		PACKED;	/* 02h: highest PVC number */
+	unsigned short loIncommingSVC	PACKED;	/* 04h: lowest incoming SVC */
+	unsigned short hiIncommingSVC	PACKED;	/* 06h: highest incoming SVC */
+	unsigned short loTwoWaySVC	PACKED;	/* 08h: lowest two-way SVC */
+	unsigned short hiTwoWaySVC	PACKED;	/* 0Ah: highest two-way SVC */
+	unsigned short loOutgoingSVC	PACKED;	/* 0Ch: lowest outgoing SVC */
+	unsigned short hiOutgoingSVC	PACKED;	/* 0Eh: highest outgoing SVC */
+} TX25ChanAlloc;
+
+typedef struct X25ChanCfg		/*------ Channel configuration -----*/
+{
+	unsigned char type	PACKED;	/* 00h: channel type */
+	unsigned char txConf	PACKED;	/* 01h: Tx packet and window sizes */
+	unsigned char rxConf	PACKED;	/* 01h: Rx packet and window sizes */
+} TX25ChanCfg;
+
+/*
+ * Defines for the 'type' field.
+ */
+#define	X25_PVC  	0x01	/* PVC */
+#define	X25_SVC_IN	0x03	/* Incoming SVC */
+#define	X25_SVC_TWOWAY	0x07	/* Two-way SVC */
+#define	X25_SVC_OUT	0x0B	/* Outgoing SVC */
+
+/*----------------------------------------------------------------------------
+ * X25_READ_STATISTICS Command.
+ */
+typedef struct X25Stats
+{						/* number of packets Tx/Rx'ed */
+	unsigned short txRestartRqst	PACKED;	/* 00h: Restart Request */
+	unsigned short rxRestartRqst	PACKED;	/* 02h: Restart Request */
+	unsigned short txRestartConf	PACKED;	/* 04h: Restart Confirmation */
+	unsigned short rxRestartConf	PACKED;	/* 06h: Restart Confirmation */
+	unsigned short txResetRqst	PACKED;	/* 08h: Reset Request */
+	unsigned short rxResetRqst	PACKED;	/* 0Ah: Reset Request */
+	unsigned short txResetConf	PACKED;	/* 0Ch: Reset Confirmation */
+	unsigned short rxResetConf	PACKED;	/* 0Eh: Reset Confirmation */
+	unsigned short txCallRequest	PACKED;	/* 10h: Call Request */
+	unsigned short rxCallRequest	PACKED;	/* 12h: Call Request */
+	unsigned short txCallAccept	PACKED;	/* 14h: Call Accept */
+	unsigned short rxCallAccept	PACKED;	/* 16h: Call Accept */
+	unsigned short txClearRqst	PACKED;	/* 18h: Clear Request */
+	unsigned short rxClearRqst	PACKED;	/* 1Ah: Clear Request */
+	unsigned short txClearConf	PACKED;	/* 1Ch: Clear Confirmation */
+	unsigned short rxClearConf	PACKED;	/* 1Eh: Clear Confirmation */
+	unsigned short txDiagnostic	PACKED;	/* 20h: Diagnostic */
+	unsigned short rxDiagnostic	PACKED;	/* 22h: Diagnostic */
+	unsigned short txRegRqst	PACKED;	/* 24h: Registration Request */
+	unsigned short rxRegRqst	PACKED;	/* 26h: Registration Request */
+	unsigned short txRegConf	PACKED;	/* 28h: Registration Confirm.*/
+	unsigned short rxRegConf	PACKED;	/* 2Ah: Registration Confirm.*/
+	unsigned short txInterrupt	PACKED;	/* 2Ch: Interrupt */
+	unsigned short rxInterrupt	PACKED;	/* 2Eh: Interrupt */
+	unsigned short txIntrConf	PACKED;	/* 30h: Interrupt Confirm. */
+	unsigned short rxIntrConf	PACKED;	/* 32h: Interrupt Confirm. */
+	unsigned short txData		PACKED;	/* 34h: Data */
+	unsigned short rxData		PACKED;	/* 36h: Data */
+	unsigned short txRR		PACKED;	/* 38h: RR */
+	unsigned short rxRR		PACKED;	/* 3Ah: RR */
+	unsigned short txRNR		PACKED;	/* 3Ch: RNR */
+	unsigned short rxRNR		PACKED;	/* 3Eh: RNR */
+} TX25Stats;
+
+/*----------------------------------------------------------------------------
+ * X25_READ_HISTORY_TABLE Command.
+ */
+typedef struct X25EventLog
+{
+	unsigned char	type	PACKED;	/* 00h: transaction type */
+	unsigned short	lcn	PACKED;	/* 01h: logical channel num */
+	unsigned char	packet	PACKED;	/* 03h: async packet type */
+	unsigned char	cause	PACKED;	/* 04h: X.25 cause field */
+	unsigned char	diag	PACKED;	/* 05h: X.25 diag field */
+	TX25TimeStamp	ts	PACKED;	/* 06h: time stamp */
+} TX25EventLog;
+
+/*
+ * Defines for the 'type' field.
+ */
+#define X25LOG_INCOMMING	0x00
+#define X25LOG_APPLICATION 	0x01
+#define X25LOG_AUTOMATIC	0x02
+#define X25LOG_ERROR		0x04
+#define X25LOG_TIMEOUT		0x08
+#define X25LOG_RECOVERY		0x10
+
+/*
+ * Defines for the 'packet' field.
+ */
+#define X25LOG_CALL_RQST	0x0B
+#define X25LOG_CALL_ACCEPTED	0x0F
+#define X25LOG_CLEAR_RQST	0x13
+#define X25LOG_CLEAR_CONFRM	0x17
+#define X25LOG_RESET_RQST	0x1B
+#define X25LOG_RESET_CONFRM	0x1F
+#define X25LOG_RESTART_RQST	0xFB
+#define X25LOG_RESTART_COMFRM	0xFF
+#define X25LOG_DIAGNOSTIC	0xF1
+#define X25LOG_DTE_REG_RQST	0xF3
+#define X25LOG_DTE_REG_COMFRM	0xF7
+
+/* ---------------------------------------------------------------------------
+ * X25_TRACE_CONFIGURE Command.
+ */
+typedef struct X25TraceCfg
+{
+	unsigned char flags	PACKED;	/* 00h: trace configuration flags */
+	unsigned char timeout	PACKED;	/* 01h: timeout for trace delay mode*/
+} TX25TraceCfg;
+
+/*
+ * Defines for the 'flags' field.
+ */
+#define X25_TRC_ENABLE		0x01	/* bit0: '1' - trace enabled */
+#define X25_TRC_TIMESTAMP	0x02	/* bit1: '1' - time stamping enabled*/
+#define X25_TRC_DELAY		0x04	/* bit2: '1' - trace delay enabled */
+#define X25_TRC_DATA		0x08	/* bit3: '1' - trace data packets */
+#define X25_TRC_SUPERVISORY	0x10    /* bit4: '1' - trace suprvisory pkts*/
+#define X25_TRC_ASYNCHRONOUS	0x20	/* bit5: '1' - trace asynch. packets*/
+#define X25_TRC_HDLC		0x40	/* bit6: '1' - trace all packets */
+#define X25_TRC_READ		0x80	/* bit7: '1' - get current config. */
+
+/* ---------------------------------------------------------------------------
+ * X25_READ_TRACE_DATA Command.
+ */
+typedef struct X25Trace			/*----- Trace data structure -------*/
+{
+	unsigned short length	PACKED;	/* 00h: trace data length */
+	unsigned char type	PACKED;	/* 02h: trace type */
+	unsigned char lost_cnt	PACKED;	/* 03h: N of traces lost */
+	TX25TimeStamp tstamp	PACKED;	/* 04h: mon/date/sec/min/hour */
+	unsigned short millisec	PACKED;	/* 09h: ms time stamp */
+	unsigned char data[0]	PACKED;	/* 0Bh: traced frame */
+} TX25Trace;
+
+/*
+ * Defines for the 'type' field.
+ */
+#define X25_TRC_TYPE_MASK	0x0F	/* bits 0..3: trace type */
+#define X25_TRC_TYPE_RX_FRAME	0x00	/* received frame trace */
+#define X25_TRC_TYPE_TX_FRAME	0x01	/* transmitted frame */
+#define X25_TRC_TYPE_ERR_FRAME	0x02	/* error frame */
+
+#define X25_TRC_ERROR_MASK	0xF0	/* bits 4..7: error code */
+#define X25_TRCERR_RX_ABORT	0x10	/* receive abort error */
+#define X25_TRCERR_RX_BADCRC	0x20	/* receive CRC error */
+#define X25_TRCERR_RX_OVERRUN	0x30	/* receiver overrun error */
+#define X25_TRCERR_RX_TOO_LONG	0x40	/* excessive frame length error */
+#define X25_TRCERR_TX_ABORT	0x70	/* aborted frame transmittion error */
+#define X25_TRCERR_TX_UNDERRUN	0x80	/* transmit underrun error */
+
+/*****************************************************************************
+ * Following definitions describe HDLC frame and X.25 packet formats.
+ ****************************************************************************/
+
+typedef struct HDLCFrame		/*----- DHLC Frame Format ----------*/
+{
+	unsigned char addr	PACKED;	/* address field */
+	unsigned char cntl	PACKED;	/* control field */
+	unsigned char data[0]	PACKED;
+} THDLCFrame;
+
+typedef struct X25Pkt			/*----- X.25 Paket Format ----------*/
+{
+	unsigned char lcn_hi	PACKED;	/* 4 MSB of Logical Channel Number */
+	unsigned char lcn_lo	PACKED;	/* 8 LSB of Logical Channel Number */
+	unsigned char type	PACKED;
+	unsigned char data[0]	PACKED;
+} TX25Pkt;
+
+/*
+ * Defines for the 'lcn_hi' field.
+ */
+#define	X25_Q_BIT_MASK		0x80	/* Data Qualifier Bit mask */
+#define	X25_D_BIT_MASK		0x40	/* Delivery Confirmation Bit mask */
+#define	X25_M_BITS_MASK		0x30	/* Modulo Bits mask */
+#define	X25_LCN_MSB_MASK	0x0F	/* LCN most significant bits mask */
+
+/*
+ * Defines for the 'type' field.
+ */
+#define	X25PKT_DATA		0x01	/* Data packet mask */
+#define	X25PKT_SUPERVISORY	0x02	/* Supervisory packet mask */
+#define	X25PKT_CALL_RQST	0x0B	/* Call Request/Incoming */
+#define	X25PKT_CALL_ACCEPTED	0x0F	/* Call Accepted/Connected */
+#define	X25PKT_CLEAR_RQST	0x13	/* Clear Request/Indication */
+#define	X25PKT_CLEAR_CONFRM	0x17	/* Clear Confirmation */
+#define	X25PKT_RESET_RQST	0x1B	/* Reset Request/Indication */
+#define	X25PKT_RESET_CONFRM	0x1F	/* Reset Confirmation */
+#define	X25PKT_RESTART_RQST	0xFB	/* Restart Request/Indication */
+#define	X25PKT_RESTART_CONFRM	0xFF	/* Restart Confirmation */
+#define	X25PKT_INTERRUPT	0x23	/* Interrupt */
+#define	X25PKT_INTERRUPT_CONFRM	0x27	/* Interrupt Confirmation */
+#define	X25PKT_DIAGNOSTIC	0xF1	/* Diagnostic */
+#define	X25PKT_REGISTR_RQST	0xF3	/* Registration Request */
+#define	X25PKT_REGISTR_CONFRM	0xF7	/* Registration Confirmation */
+#define	X25PKT_RR_MASKED	0x01	/* Receive Ready packet after masking */
+#define	X25PKT_RNR_MASKED	0x05	/* Receive Not Ready after masking  */
+
+
+typedef struct {
+	TX25Cmd cmd		PACKED;
+	char data[X25_MAX_DATA]	PACKED;
+} mbox_cmd_t;
+
+
+typedef struct {
+	unsigned char  qdm	PACKED;	/* Q/D/M bits */
+	unsigned char  cause	PACKED;	/* cause field */
+	unsigned char  diagn	PACKED;	/* diagnostics */
+	unsigned char  pktType  PACKED;
+	unsigned short length   PACKED;
+	unsigned char  result	PACKED;
+	unsigned short lcn	PACKED;
+	char reserved[7]	PACKED;
+}x25api_hdr_t;
+
+
+typedef struct {
+	x25api_hdr_t hdr	PACKED;
+	char data[X25_MAX_DATA]	PACKED;
+}x25api_t;
+
+
+/* 
+ * XPIPEMON Definitions
+ */
+
+/* valid ip_protocol for UDP management */
+#define UDPMGMT_UDP_PROTOCOL 0x11
+#define UDPMGMT_XPIPE_SIGNATURE         "XLINK8ND"
+#define UDPMGMT_DRVRSTATS_SIGNATURE     "DRVSTATS"
+
+/* values for request/reply byte */
+#define UDPMGMT_REQUEST	0x01
+#define UDPMGMT_REPLY	0x02
+#define UDP_OFFSET	12
+
+
+typedef struct {
+	unsigned char opp_flag  PACKED; /* the opp flag */
+	unsigned char command	PACKED;	/* command code */
+	unsigned short length	PACKED;	/* transfer data length */
+	unsigned char result	PACKED;	/* return code */
+	unsigned char pf	PACKED;	/* P/F bit */
+	unsigned short lcn	PACKED;	/* logical channel */
+	unsigned char qdm	PACKED;	/* Q/D/M bits */
+	unsigned char cause	PACKED;	/* cause field */
+	unsigned char diagn	PACKED;	/* diagnostics */
+	unsigned char pktType	PACKED;	/* packet type */
+	unsigned char resrv[4]	PACKED;	/* reserved */
+} cblock_t;
+
+typedef struct {
+	ip_pkt_t 		ip_pkt		PACKED;
+	udp_pkt_t		udp_pkt		PACKED;
+	wp_mgmt_t 		wp_mgmt       	PACKED;
+        cblock_t                cblock          PACKED;
+        unsigned char           data[4080]      PACKED;
+} x25_udp_pkt_t;
+
+
+typedef struct read_hdlc_stat {
+	unsigned short inf_frames_rx_ok PACKED;
+        unsigned short inf_frames_rx_out_of_seq PACKED;
+	unsigned short inf_frames_rx_no_data PACKED;
+	unsigned short inf_frames_rx_dropped PACKED;
+	unsigned short inf_frames_rx_data_too_long PACKED;
+	unsigned short inf_frames_rx_invalid_addr PACKED;
+	unsigned short inf_frames_tx_ok PACKED;
+        unsigned short inf_frames_tx_retransmit PACKED;
+       	unsigned short T1_timeouts PACKED;
+	unsigned short SABM_frames_rx PACKED;
+	unsigned short DISC_frames_rx PACKED;
+	unsigned short DM_frames_rx PACKED;
+	unsigned short FRMR_frames_rx PACKED;
+	unsigned short SABM_frames_tx PACKED;
+	unsigned short DISC_frames_tx PACKED;
+	unsigned short DM_frames_tx PACKED;
+	unsigned short FRMR_frames_tx PACKED;
+} read_hdlc_stat_t;
+
+typedef struct read_comms_err_stats{
+	unsigned char overrun_err_rx PACKED;
+	unsigned char CRC_err PACKED;
+	unsigned char abort_frames_rx PACKED;
+	unsigned char frames_dropped_buf_full PACKED;
+	unsigned char abort_frames_tx PACKED;
+	unsigned char transmit_underruns PACKED;
+	unsigned char missed_tx_underruns_intr PACKED;
+	unsigned char reserved PACKED;
+	unsigned char DCD_drop PACKED;
+	unsigned char CTS_drop PACKED;
+} read_comms_err_stats_t;
+
+typedef struct trace_data {
+	unsigned short length PACKED;
+	unsigned char  type PACKED;
+	unsigned char  trace_dropped PACKED;
+	unsigned char  reserved[5] PACKED;
+	unsigned short timestamp PACKED;
+        unsigned char  data PACKED;
+} trace_data_t;
+
+enum {UDP_XPIPE_TYPE};
+
+#define XPIPE_ENABLE_TRACING                    0x14
+#define XPIPE_DISABLE_TRACING                   0x14
+#define XPIPE_GET_TRACE_INFO                    0x16
+#define XPIPE_FT1_READ_STATUS                   0x74
+#define XPIPE_DRIVER_STAT_IFSEND                0x75
+#define XPIPE_DRIVER_STAT_INTR                  0x76
+#define XPIPE_DRIVER_STAT_GEN                   0x77
+#define XPIPE_FLUSH_DRIVER_STATS                0x78
+#define XPIPE_ROUTER_UP_TIME                    0x79        
+#define XPIPE_SET_FT1_MODE			0x81
+#define XPIPE_FT1_STATUS_CTRL			0x80
+
+
+/* error messages */
+#define NO_BUFFS_OR_CLOSED_WIN  0x33
+#define DATA_LENGTH_TOO_BIG     0x32
+#define NO_DATA_AVAILABLE       0x33
+#define Z80_TIMEOUT_ERROR       0x0a   
+#define	NO_BUFFS		0x08
+
+
+/* Trace options */
+#define TRACE_DEFAULT		0x03
+#define TRACE_SUPERVISOR_FRMS	0x10
+#define TRACE_ASYNC_FRMS	0x20
+#define TRACE_ALL_HDLC_FRMS	0x40
+#define TRACE_DATA_FRMS		0x08
+
+
+#endif	/* _SDLA_X25_H */
diff --git a/include/linux/sdladrv.h b/include/linux/sdladrv.h
new file mode 100644
index 000000000000..78f634007fc6
--- /dev/null
+++ b/include/linux/sdladrv.h
@@ -0,0 +1,70 @@
+/*****************************************************************************
+* sdladrv.h	SDLA Support Module.  Kernel API Definitions.
+*
+* Author: 	Gideon Hack	
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jun 02, 1999 	Gideon Hack	Added support for the S514 PCI adapter.
+* Dec 11, 1996	Gene Kozin	Complete overhaul.
+* Oct 17, 1996	Gene Kozin	Minor bug fixes.
+* Jun 12, 1996	Gene Kozin 	Added support for S503 card.
+* Dec 06, 1995	Gene Kozin	Initial version.
+*****************************************************************************/
+#ifndef	_SDLADRV_H
+#define	_SDLADRV_H
+
+
+#define	SDLA_MAXIORANGE	4	/* maximum I/O port range */
+#define	SDLA_WINDOWSIZE	0x2000	/* default dual-port memory window size */
+/****** Data Structures *****************************************************/
+
+/*----------------------------------------------------------------------------
+ * Adapter hardware configuration. Pointer to this structure is passed to all
+ * APIs.
+ */
+typedef struct sdlahw
+{
+	unsigned type;			/* adapter type */
+	unsigned fwid;			/* firmware ID */
+	unsigned port;			/* adapter I/O port base */
+	int irq;			/* interrupt request level */
+	char S514_cpu_no[1];		/* PCI CPU Number */
+	unsigned char S514_slot_no;	/* PCI Slot Number */
+	char auto_pci_cfg;		/* Autodetect PCI Slot */
+	struct pci_dev *pci_dev;	/* PCI device */
+	void * dpmbase;			/* dual-port memory base */
+	unsigned dpmsize;		/* dual-port memory size */
+	unsigned pclk;			/* CPU clock rate, kHz */
+	unsigned long memory;		/* memory size */
+	unsigned long vector;		/* local offset of the DPM window */
+	unsigned io_range;		/* I/O port range */
+	unsigned char regs[SDLA_MAXIORANGE]; /* was written to registers */
+	unsigned reserved[5];
+} sdlahw_t;
+
+/****** Function Prototypes *************************************************/
+
+extern int sdla_setup	(sdlahw_t* hw, void* sfm, unsigned len);
+extern int sdla_down	(sdlahw_t* hw);
+extern int sdla_inten	(sdlahw_t* hw);
+extern int sdla_intde	(sdlahw_t* hw);
+extern int sdla_intack	(sdlahw_t* hw);
+extern void S514_intack  (sdlahw_t* hw, u32 int_status);
+extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status);
+extern int sdla_intr	(sdlahw_t* hw);
+extern int sdla_mapmem	(sdlahw_t* hw, unsigned long addr);
+extern int sdla_peek	(sdlahw_t* hw, unsigned long addr, void* buf,
+			 unsigned len);
+extern int sdla_poke	(sdlahw_t* hw, unsigned long addr, void* buf,
+			 unsigned len);
+extern int sdla_exec	(void* opflag);
+
+extern unsigned wanpipe_hw_probe(void);
+
+#endif	/* _SDLADRV_H */
diff --git a/include/linux/sdlapci.h b/include/linux/sdlapci.h
new file mode 100644
index 000000000000..6f7c904f188d
--- /dev/null
+++ b/include/linux/sdlapci.h
@@ -0,0 +1,72 @@
+/*****************************************************************************
+* sdlapci.h	WANPIPE(tm) Multiprotocol WAN Link Driver.
+*		Definitions for the SDLA PCI adapter.
+*
+* Author:	Gideon Hack	<ghack@sangoma.com>
+*
+* Copyright:	(c) 1999-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jun 02, 1999	Gideon Hack	Initial version.
+*****************************************************************************/
+#ifndef	_SDLAPCI_H
+#define	_SDLAPCI_H
+
+/****** Defines *************************************************************/
+
+/* Definitions for identifying and finding S514 PCI adapters */
+#define V3_VENDOR_ID		0x11B0		/* V3 vendor ID number */
+#define V3_DEVICE_ID  		0x0002		/* V3 device ID number */
+#define SANGOMA_SUBSYS_VENDOR 	0x4753		/* ID for Sangoma */
+#define PCI_DEV_SLOT_MASK	0x1F		/* mask for slot numbering */
+#define PCI_IRQ_NOT_ALLOCATED	0xFF		/* interrupt line for no IRQ */
+
+/* Local PCI register offsets */ 
+#define PCI_VENDOR_ID_WORD	0x00		/* vendor ID */
+#define PCI_IO_BASE_DWORD	0x10		/* IO base */	
+#define PCI_MEM_BASE0_DWORD	0x14		/* memory base - apperture 0 */
+#define PCI_MEM_BASE1_DWORD     0x18		/* memory base - apperture 1 */
+#define PCI_SUBSYS_VENDOR_WORD 	0x2C		/* subsystem vendor ID */
+#define PCI_INT_LINE_BYTE	0x3C		/* interrupt line */
+#define PCI_INT_PIN_BYTE	0x3D		/* interrupt pin */
+#define PCI_MAP0_DWORD		0x40		/* PCI to local bus address 0 */
+#define PCI_MAP1_DWORD          0x44		/* PCI to local bus address 1 */
+#define PCI_INT_STATUS          0x48		/* interrupt status */
+#define PCI_INT_CONFIG		0x4C		/* interrupt configuration */
+  
+/* Local PCI register usage */
+#define PCI_MEMORY_ENABLE	0x00000003	/* enable PCI memory */
+#define PCI_CPU_A_MEM_DISABLE	0x00000002	/* disable CPU A memory */
+#define PCI_CPU_B_MEM_DISABLE  	0x00100002	/* disable CPU B memory */
+#define PCI_ENABLE_IRQ_CPU_A	0x005A0004	/* enable IRQ for CPU A */
+#define PCI_ENABLE_IRQ_CPU_B    0x005A0008	/* enable IRQ for CPU B */
+#define PCI_DISABLE_IRQ_CPU_A   0x00000004	/* disable IRQ for CPU A */
+#define PCI_DISABLE_IRQ_CPU_B   0x00000008	/* disable IRQ for CPU B */
+ 
+/* Setting for the Interrupt Status register */  
+#define IRQ_CPU_A               0x04            /* IRQ for CPU A */
+#define IRQ_CPU_B               0x08		/* IRQ for CPU B */
+
+/* The maximum size of the S514 memory */
+#define MAX_SIZEOF_S514_MEMORY	(256 * 1024)
+
+/* S514 control register offsets within the memory address space */
+#define S514_CTRL_REG_BYTE	0x80000
+ 
+/* S514 adapter control bytes */
+#define S514_CPU_HALT 		0x00
+#define S514_CPU_START		0x01
+
+/* The maximum number of S514 adapters supported */
+#define MAX_S514_CARDS		20	
+
+#define PCI_CARD_TYPE		0x2E
+#define S514_DUAL_CPU		0x12
+#define S514_SINGLE_CPU		0x11
+
+#endif	/* _SDLAPCI_H */
+
diff --git a/include/linux/sdlasfm.h b/include/linux/sdlasfm.h
new file mode 100644
index 000000000000..94aaa8ada667
--- /dev/null
+++ b/include/linux/sdlasfm.h
@@ -0,0 +1,104 @@
+/*****************************************************************************
+* sdlasfm.h	WANPIPE(tm) Multiprotocol WAN Link Driver.
+*		Definitions for the SDLA Firmware Module (SFM).
+*
+* Author: 	Gideon Hack 	
+*
+* Copyright:	(c) 1995-1999 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* Dec 11, 1996	Gene Kozin	Cosmetic changes
+* Apr 16, 1996	Gene Kozin	Changed adapter & firmware IDs. Version 2
+* Dec 15, 1995	Gene Kozin	Structures chaned
+* Nov 09, 1995	Gene Kozin	Initial version.
+*****************************************************************************/
+#ifndef	_SDLASFM_H
+#define	_SDLASFM_H
+
+/****** Defines *************************************************************/
+
+#define	SFM_VERSION	2
+#define	SFM_SIGNATURE	"SFM - Sangoma SDLA Firmware Module"
+
+/* min/max */
+#define	SFM_IMAGE_SIZE	0x8000	/* max size of SDLA code image file */
+#define	SFM_DESCR_LEN	256	/* max length of description string */
+#define	SFM_MAX_SDLA	16	/* max number of compatible adapters */
+
+/* Adapter types */
+#define SDLA_S502A	5020
+#define SDLA_S502E	5021
+#define SDLA_S503	5030
+#define SDLA_S508	5080
+#define SDLA_S507	5070
+#define SDLA_S509	5090
+#define SDLA_S514	5140
+
+/* S514 PCI adapter CPU numbers */
+#define S514_CPU_A	'A'
+#define S514_CPU_B	'B'
+
+
+/* Firmware identification numbers:
+ *    0  ..  999	Test & Diagnostics
+ *  1000 .. 1999	Streaming HDLC
+ *  2000 .. 2999	Bisync
+ *  3000 .. 3999	SDLC
+ *  4000 .. 4999	HDLC
+ *  5000 .. 5999	X.25
+ *  6000 .. 6999	Frame Relay
+ *  7000 .. 7999	PPP
+ *  8000 .. 8999        Cisco HDLC
+ */
+#define	SFID_CALIB502	 200
+#define	SFID_STRM502	1200
+#define	SFID_STRM508	1800
+#define	SFID_BSC502	2200
+#define	SFID_SDLC502	3200
+#define	SFID_HDLC502	4200
+#define	SFID_HDLC508	4800
+#define	SFID_X25_502	5200
+#define	SFID_X25_508	5800
+#define	SFID_FR502	6200
+#define	SFID_FR508	6800
+#define	SFID_PPP502	7200
+#define	SFID_PPP508	7800
+#define SFID_PPP514	7140
+#define	SFID_CHDLC508	8800
+#define SFID_CHDLC514	8140
+
+/****** Data Types **********************************************************/
+
+typedef struct	sfm_info		/* firmware module information */
+{
+	unsigned short	codeid;		/* firmware ID */
+	unsigned short	version;	/* firmaware version number */
+	unsigned short	adapter[SFM_MAX_SDLA]; /* compatible adapter types */
+	unsigned long	memsize;	/* minimum memory size */
+	unsigned short	reserved[2];	/* reserved */
+	unsigned short	startoffs;	/* entry point offset */
+	unsigned short	winoffs;	/* dual-port memory window offset */
+	unsigned short	codeoffs;	/* code load offset */
+	unsigned short	codesize;	/* code size */
+	unsigned short	dataoffs;	/* configuration data load offset */
+	unsigned short	datasize;	/* configuration data size */
+} sfm_info_t;
+
+typedef struct sfm			/* SDLA firmware file structire */
+{
+	char		signature[80];	/* SFM file signature */
+	unsigned short	version;	/* file format version */
+	unsigned short	checksum;	/* info + image */
+	unsigned short	reserved[6];	/* reserved */
+	char		descr[SFM_DESCR_LEN]; /* description string */
+	sfm_info_t	info;		/* firmware module info */
+	unsigned char	image[1];	/* code image (variable size) */
+} sfm_t;
+
+#endif	/* _SDLASFM_H */
+
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
new file mode 100644
index 000000000000..3a2702bbb1d6
--- /dev/null
+++ b/include/linux/seccomp.h
@@ -0,0 +1,34 @@
+#ifndef _LINUX_SECCOMP_H
+#define _LINUX_SECCOMP_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SECCOMP
+
+#define NR_SECCOMP_MODES 1
+
+#include <linux/thread_info.h>
+#include <asm/seccomp.h>
+
+typedef struct { int mode; } seccomp_t;
+
+extern void __secure_computing(int);
+static inline void secure_computing(int this_syscall)
+{
+	if (unlikely(test_thread_flag(TIF_SECCOMP)))
+		__secure_computing(this_syscall);
+}
+
+#else /* CONFIG_SECCOMP */
+
+#if (__GNUC__ > 2)
+  typedef struct { } seccomp_t;
+#else
+  typedef struct { int gcc_is_buggy; } seccomp_t;
+#endif
+
+#define secure_computing(x) do { } while (0)
+
+#endif /* CONFIG_SECCOMP */
+
+#endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
new file mode 100644
index 000000000000..5b0617840fa4
--- /dev/null
+++ b/include/linux/securebits.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_SECUREBITS_H
+#define _LINUX_SECUREBITS_H 1
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+extern unsigned securebits;
+
+/* When set UID 0 has no special privileges. When unset, we support
+   inheritance of root-permissions and suid-root executable under
+   compatibility mode. We raise the effective and inheritable bitmasks
+   *of the executable file* if the effective uid of the new process is
+   0. If the real uid is 0, we raise the inheritable bitmask of the
+   executable file. */
+#define SECURE_NOROOT            0
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixes"
+   to be compatible with old programs relying on set*uid to loose
+   privileges. When unset, setuid doesn't change privileges. */
+#define SECURE_NO_SETUID_FIXUP   2
+
+/* Each securesetting is implemented using two bits. One bit specify
+   whether the setting is on or off. The other bit specify whether the
+   setting is fixed or not. A setting which is fixed cannot be changed
+   from user-level. */
+
+#define issecure(X) ( (1 << (X+1)) & SECUREBITS_DEFAULT ? 	\
+		      (1 << (X)) & SECUREBITS_DEFAULT :		\
+		      (1 << (X)) & securebits )
+
+#endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/security.h b/include/linux/security.h
new file mode 100644
index 000000000000..b42095a68b1c
--- /dev/null
+++ b/include/linux/security.h
@@ -0,0 +1,2858 @@
+/*
+ * Linux Security plug
+ *
+ * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
+ * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
+ * Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
+ * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	Due to this file being licensed under the GPL there is controversy over
+ *	whether this permits you to write a module that #includes this file
+ *	without placing your module under the GPL.  Please consult a lawyer for
+ *	advice before doing this.
+ *
+ */
+
+#ifndef __LINUX_SECURITY_H
+#define __LINUX_SECURITY_H
+
+#include <linux/fs.h>
+#include <linux/binfmts.h>
+#include <linux/signal.h>
+#include <linux/resource.h>
+#include <linux/sem.h>
+#include <linux/shm.h>
+#include <linux/msg.h>
+#include <linux/sched.h>
+
+struct ctl_table;
+
+/*
+ * These functions are in security/capability.c and are used
+ * as the default capabilities functions
+ */
+extern int cap_capable (struct task_struct *tsk, int cap);
+extern int cap_settime (struct timespec *ts, struct timezone *tz);
+extern int cap_ptrace (struct task_struct *parent, struct task_struct *child);
+extern int cap_capget (struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
+extern int cap_capset_check (struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
+extern void cap_capset_set (struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
+extern int cap_bprm_set_security (struct linux_binprm *bprm);
+extern void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe);
+extern int cap_bprm_secureexec(struct linux_binprm *bprm);
+extern int cap_inode_setxattr(struct dentry *dentry, char *name, void *value, size_t size, int flags);
+extern int cap_inode_removexattr(struct dentry *dentry, char *name);
+extern int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, int flags);
+extern void cap_task_reparent_to_init (struct task_struct *p);
+extern int cap_syslog (int type);
+extern int cap_vm_enough_memory (long pages);
+
+struct msghdr;
+struct sk_buff;
+struct sock;
+struct sockaddr;
+struct socket;
+
+extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
+extern int cap_netlink_recv(struct sk_buff *skb);
+
+/*
+ * Values used in the task_security_ops calls
+ */
+/* setuid or setgid, id0 == uid or gid */
+#define LSM_SETID_ID	1
+
+/* setreuid or setregid, id0 == real, id1 == eff */
+#define LSM_SETID_RE	2
+
+/* setresuid or setresgid, id0 == real, id1 == eff, uid2 == saved */
+#define LSM_SETID_RES	4
+
+/* setfsuid or setfsgid, id0 == fsuid or fsgid */
+#define LSM_SETID_FS	8
+
+/* forward declares to avoid warnings */
+struct nfsctl_arg;
+struct sched_param;
+struct swap_info_struct;
+
+/* bprm_apply_creds unsafe reasons */
+#define LSM_UNSAFE_SHARE	1
+#define LSM_UNSAFE_PTRACE	2
+#define LSM_UNSAFE_PTRACE_CAP	4
+
+#ifdef CONFIG_SECURITY
+
+/**
+ * struct security_operations - main security structure
+ *
+ * Security hooks for program execution operations.
+ *
+ * @bprm_alloc_security:
+ *	Allocate and attach a security structure to the @bprm->security field.
+ *	The security field is initialized to NULL when the bprm structure is
+ *	allocated.
+ *	@bprm contains the linux_binprm structure to be modified.
+ *	Return 0 if operation was successful.
+ * @bprm_free_security:
+ *	@bprm contains the linux_binprm structure to be modified.
+ *	Deallocate and clear the @bprm->security field.
+ * @bprm_apply_creds:
+ *	Compute and set the security attributes of a process being transformed
+ *	by an execve operation based on the old attributes (current->security)
+ *	and the information saved in @bprm->security by the set_security hook.
+ *	Since this hook function (and its caller) are void, this hook can not
+ *	return an error.  However, it can leave the security attributes of the
+ *	process unchanged if an access failure occurs at this point.
+ *	bprm_apply_creds is called under task_lock.  @unsafe indicates various
+ *	reasons why it may be unsafe to change security state.
+ *	@bprm contains the linux_binprm structure.
+ * @bprm_post_apply_creds:
+ *	Runs after bprm_apply_creds with the task_lock dropped, so that
+ *	functions which cannot be called safely under the task_lock can
+ *	be used.  This hook is a good place to perform state changes on
+ *	the process such as closing open file descriptors to which access
+ *	is no longer granted if the attributes were changed.
+ *	Note that a security module might need to save state between
+ *	bprm_apply_creds and bprm_post_apply_creds to store the decision
+ *	on whether the process may proceed.
+ *	@bprm contains the linux_binprm structure.
+ * @bprm_set_security:
+ *	Save security information in the bprm->security field, typically based
+ *	on information about the bprm->file, for later use by the apply_creds
+ *	hook.  This hook may also optionally check permissions (e.g. for
+ *	transitions between security domains).
+ *	This hook may be called multiple times during a single execve, e.g. for
+ *	interpreters.  The hook can tell whether it has already been called by
+ *	checking to see if @bprm->security is non-NULL.  If so, then the hook
+ *	may decide either to retain the security information saved earlier or
+ *	to replace it.
+ *	@bprm contains the linux_binprm structure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @bprm_check_security:
+ * 	This hook mediates the point when a search for a binary handler	will
+ * 	begin.  It allows a check the @bprm->security value which is set in
+ * 	the preceding set_security call.  The primary difference from
+ * 	set_security is that the argv list and envp list are reliably
+ * 	available in @bprm.  This hook may be called multiple times
+ * 	during a single execve; and in each pass set_security is called
+ * 	first.
+ * 	@bprm contains the linux_binprm structure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @bprm_secureexec:
+ *      Return a boolean value (0 or 1) indicating whether a "secure exec" 
+ *      is required.  The flag is passed in the auxiliary table
+ *      on the initial stack to the ELF interpreter to indicate whether libc 
+ *      should enable secure mode.
+ *      @bprm contains the linux_binprm structure.
+ *
+ * Security hooks for filesystem operations.
+ *
+ * @sb_alloc_security:
+ *	Allocate and attach a security structure to the sb->s_security field.
+ *	The s_security field is initialized to NULL when the structure is
+ *	allocated.
+ *	@sb contains the super_block structure to be modified.
+ *	Return 0 if operation was successful.
+ * @sb_free_security:
+ *	Deallocate and clear the sb->s_security field.
+ *	@sb contains the super_block structure to be modified.
+ * @sb_statfs:
+ *	Check permission before obtaining filesystem statistics for the @sb
+ *	filesystem.
+ *	@sb contains the super_block structure for the filesystem.
+ *	Return 0 if permission is granted.  
+ * @sb_mount:
+ *	Check permission before an object specified by @dev_name is mounted on
+ *	the mount point named by @nd.  For an ordinary mount, @dev_name
+ *	identifies a device if the file system type requires a device.  For a
+ *	remount (@flags & MS_REMOUNT), @dev_name is irrelevant.  For a
+ *	loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
+ *	pathname of the object being mounted.
+ *	@dev_name contains the name for object being mounted.
+ *	@nd contains the nameidata structure for mount point object.
+ *	@type contains the filesystem type.
+ *	@flags contains the mount flags.
+ *	@data contains the filesystem-specific data.
+ *	Return 0 if permission is granted.
+ * @sb_copy_data:
+ *	Allow mount option data to be copied prior to parsing by the filesystem,
+ *	so that the security module can extract security-specific mount
+ *	options cleanly (a filesystem may modify the data e.g. with strsep()).
+ *	This also allows the original mount data to be stripped of security-
+ *	specific options to avoid having to make filesystems aware of them.
+ *	@type the type of filesystem being mounted.
+ *	@orig the original mount data copied from userspace.
+ *	@copy copied data which will be passed to the security module.
+ *	Returns 0 if the copy was successful.
+ * @sb_check_sb:
+ *	Check permission before the device with superblock @mnt->sb is mounted
+ *	on the mount point named by @nd.
+ *	@mnt contains the vfsmount for device being mounted.
+ *	@nd contains the nameidata object for the mount point.
+ *	Return 0 if permission is granted.
+ * @sb_umount:
+ *	Check permission before the @mnt file system is unmounted.
+ *	@mnt contains the mounted file system.
+ *	@flags contains the unmount flags, e.g. MNT_FORCE.
+ *	Return 0 if permission is granted.
+ * @sb_umount_close:
+ *	Close any files in the @mnt mounted filesystem that are held open by
+ *	the security module.  This hook is called during an umount operation
+ *	prior to checking whether the filesystem is still busy.
+ *	@mnt contains the mounted filesystem.
+ * @sb_umount_busy:
+ *	Handle a failed umount of the @mnt mounted filesystem, e.g.  re-opening
+ *	any files that were closed by umount_close.  This hook is called during
+ *	an umount operation if the umount fails after a call to the
+ *	umount_close hook.
+ *	@mnt contains the mounted filesystem.
+ * @sb_post_remount:
+ *	Update the security module's state when a filesystem is remounted.
+ *	This hook is only called if the remount was successful.
+ *	@mnt contains the mounted file system.
+ *	@flags contains the new filesystem flags.
+ *	@data contains the filesystem-specific data.
+ * @sb_post_mountroot:
+ *	Update the security module's state when the root filesystem is mounted.
+ *	This hook is only called if the mount was successful.
+ * @sb_post_addmount:
+ *	Update the security module's state when a filesystem is mounted.
+ *	This hook is called any time a mount is successfully grafetd to
+ *	the tree.
+ *	@mnt contains the mounted filesystem.
+ *	@mountpoint_nd contains the nameidata structure for the mount point.
+ * @sb_pivotroot:
+ *	Check permission before pivoting the root filesystem.
+ *	@old_nd contains the nameidata structure for the new location of the current root (put_old).
+ *      @new_nd contains the nameidata structure for the new root (new_root).
+ *	Return 0 if permission is granted.
+ * @sb_post_pivotroot:
+ *	Update module state after a successful pivot.
+ *	@old_nd contains the nameidata structure for the old root.
+ *      @new_nd contains the nameidata structure for the new root.
+ *
+ * Security hooks for inode operations.
+ *
+ * @inode_alloc_security:
+ *	Allocate and attach a security structure to @inode->i_security.  The
+ *	i_security field is initialized to NULL when the inode structure is
+ *	allocated.
+ *	@inode contains the inode structure.
+ *	Return 0 if operation was successful.
+ * @inode_free_security:
+ *	@inode contains the inode structure.
+ *	Deallocate the inode security structure and set @inode->i_security to
+ *	NULL. 
+ * @inode_create:
+ *	Check permission to create a regular file.
+ *	@dir contains inode structure of the parent of the new file.
+ *	@dentry contains the dentry structure for the file to be created.
+ *	@mode contains the file mode of the file to be created.
+ *	Return 0 if permission is granted.
+ * @inode_post_create:
+ *	Set the security attributes on a newly created regular file.  This hook
+ *	is called after a file has been successfully created.
+ *	@dir contains the inode structure of the parent directory of the new file.
+ *	@dentry contains the the dentry structure for the newly created file.
+ *	@mode contains the file mode.
+ * @inode_link:
+ *	Check permission before creating a new hard link to a file.
+ *	@old_dentry contains the dentry structure for an existing link to the file.
+ *	@dir contains the inode structure of the parent directory of the new link.
+ *	@new_dentry contains the dentry structure for the new link.
+ *	Return 0 if permission is granted.
+ * @inode_post_link:
+ *	Set security attributes for a new hard link to a file.
+ *	@old_dentry contains the dentry structure for the existing link.
+ *	@dir contains the inode structure of the parent directory of the new file.
+ *	@new_dentry contains the dentry structure for the new file link.
+ * @inode_unlink:
+ *	Check the permission to remove a hard link to a file. 
+ *	@dir contains the inode structure of parent directory of the file.
+ *	@dentry contains the dentry structure for file to be unlinked.
+ *	Return 0 if permission is granted.
+ * @inode_symlink:
+ *	Check the permission to create a symbolic link to a file.
+ *	@dir contains the inode structure of parent directory of the symbolic link.
+ *	@dentry contains the dentry structure of the symbolic link.
+ *	@old_name contains the pathname of file.
+ *	Return 0 if permission is granted.
+ * @inode_post_symlink:
+ *	@dir contains the inode structure of the parent directory of the new link.
+ *	@dentry contains the dentry structure of new symbolic link.
+ *	@old_name contains the pathname of file.
+ *	Set security attributes for a newly created symbolic link.  Note that
+ *	@dentry->d_inode may be NULL, since the filesystem might not
+ *	instantiate the dentry (e.g. NFS).
+ * @inode_mkdir:
+ *	Check permissions to create a new directory in the existing directory
+ *	associated with inode strcture @dir. 
+ *	@dir containst the inode structure of parent of the directory to be created.
+ *	@dentry contains the dentry structure of new directory.
+ *	@mode contains the mode of new directory.
+ *	Return 0 if permission is granted.
+ * @inode_post_mkdir:
+ *	Set security attributes on a newly created directory.
+ *	@dir contains the inode structure of parent of the directory to be created.
+ *	@dentry contains the dentry structure of new directory.
+ *	@mode contains the mode of new directory.
+ * @inode_rmdir:
+ *	Check the permission to remove a directory.
+ *	@dir contains the inode structure of parent of the directory to be removed.
+ *	@dentry contains the dentry structure of directory to be removed.
+ *	Return 0 if permission is granted.
+ * @inode_mknod:
+ *	Check permissions when creating a special file (or a socket or a fifo
+ *	file created via the mknod system call).  Note that if mknod operation
+ *	is being done for a regular file, then the create hook will be called
+ *	and not this hook.
+ *	@dir contains the inode structure of parent of the new file.
+ *	@dentry contains the dentry structure of the new file.
+ *	@mode contains the mode of the new file.
+ *	@dev contains the the device number.
+ *	Return 0 if permission is granted.
+ * @inode_post_mknod:
+ *	Set security attributes on a newly created special file (or socket or
+ *	fifo file created via the mknod system call).
+ *	@dir contains the inode structure of parent of the new node.
+ *	@dentry contains the dentry structure of the new node.
+ *	@mode contains the mode of the new node.
+ *	@dev contains the the device number.
+ * @inode_rename:
+ *	Check for permission to rename a file or directory.
+ *	@old_dir contains the inode structure for parent of the old link.
+ *	@old_dentry contains the dentry structure of the old link.
+ *	@new_dir contains the inode structure for parent of the new link.
+ *	@new_dentry contains the dentry structure of the new link.
+ *	Return 0 if permission is granted.
+ * @inode_post_rename:
+ *	Set security attributes on a renamed file or directory.
+ *	@old_dir contains the inode structure for parent of the old link.
+ *	@old_dentry contains the dentry structure of the old link.
+ *	@new_dir contains the inode structure for parent of the new link.
+ *	@new_dentry contains the dentry structure of the new link.
+ * @inode_readlink:
+ *	Check the permission to read the symbolic link.
+ *	@dentry contains the dentry structure for the file link.
+ *	Return 0 if permission is granted.
+ * @inode_follow_link:
+ *	Check permission to follow a symbolic link when looking up a pathname.
+ *	@dentry contains the dentry structure for the link.
+ *	@nd contains the nameidata structure for the parent directory.
+ *	Return 0 if permission is granted.
+ * @inode_permission:
+ *	Check permission before accessing an inode.  This hook is called by the
+ *	existing Linux permission function, so a security module can use it to
+ *	provide additional checking for existing Linux permission checks.
+ *	Notice that this hook is called when a file is opened (as well as many
+ *	other operations), whereas the file_security_ops permission hook is
+ *	called when the actual read/write operations are performed.
+ *	@inode contains the inode structure to check.
+ *	@mask contains the permission mask.
+ *     @nd contains the nameidata (may be NULL).
+ *	Return 0 if permission is granted.
+ * @inode_setattr:
+ *	Check permission before setting file attributes.  Note that the kernel
+ *	call to notify_change is performed from several locations, whenever
+ *	file attributes change (such as when a file is truncated, chown/chmod
+ *	operations, transferring disk quotas, etc).
+ *	@dentry contains the dentry structure for the file.
+ *	@attr is the iattr structure containing the new file attributes.
+ *	Return 0 if permission is granted.
+ * @inode_getattr:
+ *	Check permission before obtaining file attributes.
+ *	@mnt is the vfsmount where the dentry was looked up
+ *	@dentry contains the dentry structure for the file.
+ *	Return 0 if permission is granted.
+ * @inode_delete:
+ *	@inode contains the inode structure for deleted inode.
+ *	This hook is called when a deleted inode is released (i.e. an inode
+ *	with no hard links has its use count drop to zero).  A security module
+ *	can use this hook to release any persistent label associated with the
+ *	inode.
+ * @inode_setxattr:
+ * 	Check permission before setting the extended attributes
+ * 	@value identified by @name for @dentry.
+ * 	Return 0 if permission is granted.
+ * @inode_post_setxattr:
+ * 	Update inode security field after successful setxattr operation.
+ * 	@value identified by @name for @dentry.
+ * @inode_getxattr:
+ * 	Check permission before obtaining the extended attributes
+ * 	identified by @name for @dentry.
+ * 	Return 0 if permission is granted.
+ * @inode_listxattr:
+ * 	Check permission before obtaining the list of extended attribute 
+ * 	names for @dentry.
+ * 	Return 0 if permission is granted.
+ * @inode_removexattr:
+ * 	Check permission before removing the extended attribute
+ * 	identified by @name for @dentry.
+ * 	Return 0 if permission is granted.
+ * @inode_getsecurity:
+ *	Copy the extended attribute representation of the security label 
+ *	associated with @name for @inode into @buffer.  @buffer may be
+ *	NULL to request the size of the buffer required.  @size indicates
+ *	the size of @buffer in bytes.  Note that @name is the remainder
+ *	of the attribute name after the security. prefix has been removed.
+ *	Return number of bytes used/required on success.
+ * @inode_setsecurity:
+ *	Set the security label associated with @name for @inode from the
+ *	extended attribute value @value.  @size indicates the size of the
+ *	@value in bytes.  @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
+ *	Note that @name is the remainder of the attribute name after the 
+ *	security. prefix has been removed.
+ *	Return 0 on success.
+ * @inode_listsecurity:
+ *	Copy the extended attribute names for the security labels
+ *	associated with @inode into @buffer.  The maximum size of @buffer
+ *	is specified by @buffer_size.  @buffer may be NULL to request
+ *	the size of the buffer required.
+ *	Returns number of bytes used/required on success.
+ *
+ * Security hooks for file operations
+ *
+ * @file_permission:
+ *	Check file permissions before accessing an open file.  This hook is
+ *	called by various operations that read or write files.  A security
+ *	module can use this hook to perform additional checking on these
+ *	operations, e.g.  to revalidate permissions on use to support privilege
+ *	bracketing or policy changes.  Notice that this hook is used when the
+ *	actual read/write operations are performed, whereas the
+ *	inode_security_ops hook is called when a file is opened (as well as
+ *	many other operations).
+ *	Caveat:  Although this hook can be used to revalidate permissions for
+ *	various system call operations that read or write files, it does not
+ *	address the revalidation of permissions for memory-mapped files.
+ *	Security modules must handle this separately if they need such
+ *	revalidation.
+ *	@file contains the file structure being accessed.
+ *	@mask contains the requested permissions.
+ *	Return 0 if permission is granted.
+ * @file_alloc_security:
+ *	Allocate and attach a security structure to the file->f_security field.
+ *	The security field is initialized to NULL when the structure is first
+ *	created.
+ *	@file contains the file structure to secure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @file_free_security:
+ *	Deallocate and free any security structures stored in file->f_security.
+ *	@file contains the file structure being modified.
+ * @file_ioctl:
+ *	@file contains the file structure.
+ *	@cmd contains the operation to perform.
+ *	@arg contains the operational arguments.
+ *	Check permission for an ioctl operation on @file.  Note that @arg can
+ *	sometimes represents a user space pointer; in other cases, it may be a
+ *	simple integer value.  When @arg represents a user space pointer, it
+ *	should never be used by the security module.
+ *	Return 0 if permission is granted.
+ * @file_mmap :
+ *	Check permissions for a mmap operation.  The @file may be NULL, e.g.
+ *	if mapping anonymous memory.
+ *	@file contains the file structure for file to map (may be NULL).
+ *	@reqprot contains the protection requested by the application.
+ *	@prot contains the protection that will be applied by the kernel.
+ *	@flags contains the operational flags.
+ *	Return 0 if permission is granted.
+ * @file_mprotect:
+ *	Check permissions before changing memory access permissions.
+ *	@vma contains the memory region to modify.
+ *	@reqprot contains the protection requested by the application.
+ *	@prot contains the protection that will be applied by the kernel.
+ *	Return 0 if permission is granted.
+ * @file_lock:
+ *	Check permission before performing file locking operations.
+ *	Note: this hook mediates both flock and fcntl style locks.
+ *	@file contains the file structure.
+ *	@cmd contains the posix-translated lock operation to perform
+ *	(e.g. F_RDLCK, F_WRLCK).
+ *	Return 0 if permission is granted.
+ * @file_fcntl:
+ *	Check permission before allowing the file operation specified by @cmd
+ *	from being performed on the file @file.  Note that @arg can sometimes
+ *	represents a user space pointer; in other cases, it may be a simple
+ *	integer value.  When @arg represents a user space pointer, it should
+ *	never be used by the security module.
+ *	@file contains the file structure.
+ *	@cmd contains the operation to be performed.
+ *	@arg contains the operational arguments.
+ *	Return 0 if permission is granted.
+ * @file_set_fowner:
+ *	Save owner security information (typically from current->security) in
+ *	file->f_security for later use by the send_sigiotask hook.
+ *	@file contains the file structure to update.
+ *	Return 0 on success.
+ * @file_send_sigiotask:
+ *	Check permission for the file owner @fown to send SIGIO or SIGURG to the
+ *	process @tsk.  Note that this hook is sometimes called from interrupt.
+ *	Note that the fown_struct, @fown, is never outside the context of a
+ *	struct file, so the file structure (and associated security information)
+ *	can always be obtained:
+ *		(struct file *)((long)fown - offsetof(struct file,f_owner));
+ * 	@tsk contains the structure of task receiving signal.
+ *	@fown contains the file owner information.
+ *	@sig is the signal that will be sent.  When 0, kernel sends SIGIO.
+ *	Return 0 if permission is granted.
+ * @file_receive:
+ *	This hook allows security modules to control the ability of a process
+ *	to receive an open file descriptor via socket IPC.
+ *	@file contains the file structure being received.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for task operations.
+ *
+ * @task_create:
+ *	Check permission before creating a child process.  See the clone(2)
+ *	manual page for definitions of the @clone_flags.
+ *	@clone_flags contains the flags indicating what should be shared.
+ *	Return 0 if permission is granted.
+ * @task_alloc_security:
+ *	@p contains the task_struct for child process.
+ *	Allocate and attach a security structure to the p->security field. The
+ *	security field is initialized to NULL when the task structure is
+ *	allocated.
+ *	Return 0 if operation was successful.
+ * @task_free_security:
+ *	@p contains the task_struct for process.
+ *	Deallocate and clear the p->security field.
+ * @task_setuid:
+ *	Check permission before setting one or more of the user identity
+ *	attributes of the current process.  The @flags parameter indicates
+ *	which of the set*uid system calls invoked this hook and how to
+ *	interpret the @id0, @id1, and @id2 parameters.  See the LSM_SETID
+ *	definitions at the beginning of this file for the @flags values and
+ *	their meanings.
+ *	@id0 contains a uid.
+ *	@id1 contains a uid.
+ *	@id2 contains a uid.
+ *	@flags contains one of the LSM_SETID_* values.
+ *	Return 0 if permission is granted.
+ * @task_post_setuid:
+ *	Update the module's state after setting one or more of the user
+ *	identity attributes of the current process.  The @flags parameter
+ *	indicates which of the set*uid system calls invoked this hook.  If
+ *	@flags is LSM_SETID_FS, then @old_ruid is the old fs uid and the other
+ *	parameters are not used.
+ *	@old_ruid contains the old real uid (or fs uid if LSM_SETID_FS).
+ *	@old_euid contains the old effective uid (or -1 if LSM_SETID_FS).
+ *	@old_suid contains the old saved uid (or -1 if LSM_SETID_FS).
+ *	@flags contains one of the LSM_SETID_* values.
+ *	Return 0 on success.
+ * @task_setgid:
+ *	Check permission before setting one or more of the group identity
+ *	attributes of the current process.  The @flags parameter indicates
+ *	which of the set*gid system calls invoked this hook and how to
+ *	interpret the @id0, @id1, and @id2 parameters.  See the LSM_SETID
+ *	definitions at the beginning of this file for the @flags values and
+ *	their meanings.
+ *	@id0 contains a gid.
+ *	@id1 contains a gid.
+ *	@id2 contains a gid.
+ *	@flags contains one of the LSM_SETID_* values.
+ *	Return 0 if permission is granted.
+ * @task_setpgid:
+ *	Check permission before setting the process group identifier of the
+ *	process @p to @pgid.
+ *	@p contains the task_struct for process being modified.
+ *	@pgid contains the new pgid.
+ *	Return 0 if permission is granted.
+ * @task_getpgid:
+ *	Check permission before getting the process group identifier of the
+ *	process @p.
+ *	@p contains the task_struct for the process.
+ *	Return 0 if permission is granted.
+ * @task_getsid:
+ *	Check permission before getting the session identifier of the process
+ *	@p.
+ *	@p contains the task_struct for the process.
+ *	Return 0 if permission is granted.
+ * @task_setgroups:
+ *	Check permission before setting the supplementary group set of the
+ *	current process.
+ *	@group_info contains the new group information.
+ *	Return 0 if permission is granted.
+ * @task_setnice:
+ *	Check permission before setting the nice value of @p to @nice.
+ *	@p contains the task_struct of process.
+ *	@nice contains the new nice value.
+ *	Return 0 if permission is granted.
+ * @task_setrlimit:
+ *	Check permission before setting the resource limits of the current
+ *	process for @resource to @new_rlim.  The old resource limit values can
+ *	be examined by dereferencing (current->signal->rlim + resource).
+ *	@resource contains the resource whose limit is being set.
+ *	@new_rlim contains the new limits for @resource.
+ *	Return 0 if permission is granted.
+ * @task_setscheduler:
+ *	Check permission before setting scheduling policy and/or parameters of
+ *	process @p based on @policy and @lp.
+ *	@p contains the task_struct for process.
+ *	@policy contains the scheduling policy.
+ *	@lp contains the scheduling parameters.
+ *	Return 0 if permission is granted.
+ * @task_getscheduler:
+ *	Check permission before obtaining scheduling information for process
+ *	@p.
+ *	@p contains the task_struct for process.
+ *	Return 0 if permission is granted.
+ * @task_kill:
+ *	Check permission before sending signal @sig to @p.  @info can be NULL,
+ *	the constant 1, or a pointer to a siginfo structure.  If @info is 1 or
+ *	SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
+ *	from the kernel and should typically be permitted.
+ *	SIGIO signals are handled separately by the send_sigiotask hook in
+ *	file_security_ops.
+ *	@p contains the task_struct for process.
+ *	@info contains the signal information.
+ *	@sig contains the signal value.
+ *	Return 0 if permission is granted.
+ * @task_wait:
+ *	Check permission before allowing a process to reap a child process @p
+ *	and collect its status information.
+ *	@p contains the task_struct for process.
+ *	Return 0 if permission is granted.
+ * @task_prctl:
+ *	Check permission before performing a process control operation on the
+ *	current process.
+ *	@option contains the operation.
+ *	@arg2 contains a argument.
+ *	@arg3 contains a argument.
+ *	@arg4 contains a argument.
+ *	@arg5 contains a argument.
+ *	Return 0 if permission is granted.
+ * @task_reparent_to_init:
+ * 	Set the security attributes in @p->security for a kernel thread that
+ * 	is being reparented to the init task.
+ *	@p contains the task_struct for the kernel thread.
+ * @task_to_inode:
+ * 	Set the security attributes for an inode based on an associated task's
+ * 	security attributes, e.g. for /proc/pid inodes.
+ *	@p contains the task_struct for the task.
+ *	@inode contains the inode structure for the inode.
+ *
+ * Security hooks for Netlink messaging.
+ *
+ * @netlink_send:
+ *	Save security information for a netlink message so that permission
+ *	checking can be performed when the message is processed.  The security
+ *	information can be saved using the eff_cap field of the
+ *      netlink_skb_parms structure.  Also may be used to provide fine
+ *	grained control over message transmission.
+ *	@sk associated sock of task sending the message.,
+ *	@skb contains the sk_buff structure for the netlink message.
+ *	Return 0 if the information was successfully saved and message
+ *	is allowed to be transmitted.
+ * @netlink_recv:
+ *	Check permission before processing the received netlink message in
+ *	@skb.
+ *	@skb contains the sk_buff structure for the netlink message.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for Unix domain networking.
+ *
+ * @unix_stream_connect:
+ *	Check permissions before establishing a Unix domain stream connection
+ *	between @sock and @other.
+ *	@sock contains the socket structure.
+ *	@other contains the peer socket structure.
+ *	Return 0 if permission is granted.
+ * @unix_may_send:
+ *	Check permissions before connecting or sending datagrams from @sock to
+ *	@other.
+ *	@sock contains the socket structure.
+ *	@sock contains the peer socket structure.
+ *	Return 0 if permission is granted.
+ *
+ * The @unix_stream_connect and @unix_may_send hooks were necessary because
+ * Linux provides an alternative to the conventional file name space for Unix
+ * domain sockets.  Whereas binding and connecting to sockets in the file name
+ * space is mediated by the typical file permissions (and caught by the mknod
+ * and permission hooks in inode_security_ops), binding and connecting to
+ * sockets in the abstract name space is completely unmediated.  Sufficient
+ * control of Unix domain sockets in the abstract name space isn't possible
+ * using only the socket layer hooks, since we need to know the actual target
+ * socket, which is not looked up until we are inside the af_unix code.
+ *
+ * Security hooks for socket operations.
+ *
+ * @socket_create:
+ *	Check permissions prior to creating a new socket.
+ *	@family contains the requested protocol family.
+ *	@type contains the requested communications type.
+ *	@protocol contains the requested protocol.
+ *	@kern set to 1 if a kernel socket.
+ *	Return 0 if permission is granted.
+ * @socket_post_create:
+ *	This hook allows a module to update or allocate a per-socket security
+ *	structure. Note that the security field was not added directly to the
+ *	socket structure, but rather, the socket security information is stored
+ *	in the associated inode.  Typically, the inode alloc_security hook will
+ *	allocate and and attach security information to
+ *	sock->inode->i_security.  This hook may be used to update the
+ *	sock->inode->i_security field with additional information that wasn't
+ *	available when the inode was allocated.
+ *	@sock contains the newly created socket structure.
+ *	@family contains the requested protocol family.
+ *	@type contains the requested communications type.
+ *	@protocol contains the requested protocol.
+ *	@kern set to 1 if a kernel socket.
+ * @socket_bind:
+ *	Check permission before socket protocol layer bind operation is
+ *	performed and the socket @sock is bound to the address specified in the
+ *	@address parameter.
+ *	@sock contains the socket structure.
+ *	@address contains the address to bind to.
+ *	@addrlen contains the length of address.
+ *	Return 0 if permission is granted.  
+ * @socket_connect:
+ *	Check permission before socket protocol layer connect operation
+ *	attempts to connect socket @sock to a remote address, @address.
+ *	@sock contains the socket structure.
+ *	@address contains the address of remote endpoint.
+ *	@addrlen contains the length of address.
+ *	Return 0 if permission is granted.  
+ * @socket_listen:
+ *	Check permission before socket protocol layer listen operation.
+ *	@sock contains the socket structure.
+ *	@backlog contains the maximum length for the pending connection queue.
+ *	Return 0 if permission is granted.
+ * @socket_accept:
+ *	Check permission before accepting a new connection.  Note that the new
+ *	socket, @newsock, has been created and some information copied to it,
+ *	but the accept operation has not actually been performed.
+ *	@sock contains the listening socket structure.
+ *	@newsock contains the newly created server socket for connection.
+ *	Return 0 if permission is granted.
+ * @socket_post_accept:
+ *	This hook allows a security module to copy security
+ *	information into the newly created socket's inode.
+ *	@sock contains the listening socket structure.
+ *	@newsock contains the newly created server socket for connection.
+ * @socket_sendmsg:
+ *	Check permission before transmitting a message to another socket.
+ *	@sock contains the socket structure.
+ *	@msg contains the message to be transmitted.
+ *	@size contains the size of message.
+ *	Return 0 if permission is granted.
+ * @socket_recvmsg:
+ *	Check permission before receiving a message from a socket.
+ *	@sock contains the socket structure.
+ *	@msg contains the message structure.
+ *	@size contains the size of message structure.
+ *	@flags contains the operational flags.
+ *	Return 0 if permission is granted.  
+ * @socket_getsockname:
+ *	Check permission before the local address (name) of the socket object
+ *	@sock is retrieved.
+ *	@sock contains the socket structure.
+ *	Return 0 if permission is granted.
+ * @socket_getpeername:
+ *	Check permission before the remote address (name) of a socket object
+ *	@sock is retrieved.
+ *	@sock contains the socket structure.
+ *	Return 0 if permission is granted.
+ * @socket_getsockopt:
+ *	Check permissions before retrieving the options associated with socket
+ *	@sock.
+ *	@sock contains the socket structure.
+ *	@level contains the protocol level to retrieve option from.
+ *	@optname contains the name of option to retrieve.
+ *	Return 0 if permission is granted.
+ * @socket_setsockopt:
+ *	Check permissions before setting the options associated with socket
+ *	@sock.
+ *	@sock contains the socket structure.
+ *	@level contains the protocol level to set options for.
+ *	@optname contains the name of the option to set.
+ *	Return 0 if permission is granted.  
+ * @socket_shutdown:
+ *	Checks permission before all or part of a connection on the socket
+ *	@sock is shut down.
+ *	@sock contains the socket structure.
+ *	@how contains the flag indicating how future sends and receives are handled.
+ *	Return 0 if permission is granted.
+ * @socket_sock_rcv_skb:
+ *	Check permissions on incoming network packets.  This hook is distinct
+ *	from Netfilter's IP input hooks since it is the first time that the
+ *	incoming sk_buff @skb has been associated with a particular socket, @sk.
+ *	@sk contains the sock (not socket) associated with the incoming sk_buff.
+ *	@skb contains the incoming network data.
+ * @socket_getpeersec:
+ *	This hook allows the security module to provide peer socket security
+ *	state to userspace via getsockopt SO_GETPEERSEC.
+ *	@sock is the local socket.
+ *	@optval userspace memory where the security state is to be copied.
+ *	@optlen userspace int where the module should copy the actual length
+ *	of the security state.
+ *	@len as input is the maximum length to copy to userspace provided
+ *	by the caller.
+ *	Return 0 if all is well, otherwise, typical getsockopt return
+ *	values.
+ * @sk_alloc_security:
+ *      Allocate and attach a security structure to the sk->sk_security field,
+ *      which is used to copy security attributes between local stream sockets.
+ * @sk_free_security:
+ *	Deallocate security structure.
+ *
+ * Security hooks affecting all System V IPC operations.
+ *
+ * @ipc_permission:
+ *	Check permissions for access to IPC
+ *	@ipcp contains the kernel IPC permission structure
+ *	@flag contains the desired (requested) permission set
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for individual messages held in System V IPC message queues
+ * @msg_msg_alloc_security:
+ *	Allocate and attach a security structure to the msg->security field.
+ *	The security field is initialized to NULL when the structure is first
+ *	created.
+ *	@msg contains the message structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @msg_msg_free_security:
+ *	Deallocate the security structure for this message.
+ *	@msg contains the message structure to be modified.
+ *
+ * Security hooks for System V IPC Message Queues
+ *
+ * @msg_queue_alloc_security:
+ *	Allocate and attach a security structure to the
+ *	msq->q_perm.security field. The security field is initialized to
+ *	NULL when the structure is first created.
+ *	@msq contains the message queue structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @msg_queue_free_security:
+ *	Deallocate security structure for this message queue.
+ *	@msq contains the message queue structure to be modified.
+ * @msg_queue_associate:
+ *	Check permission when a message queue is requested through the
+ *	msgget system call.  This hook is only called when returning the
+ *	message queue identifier for an existing message queue, not when a
+ *	new message queue is created.
+ *	@msq contains the message queue to act upon.
+ *	@msqflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @msg_queue_msgctl:
+ *	Check permission when a message control operation specified by @cmd
+ *	is to be performed on the message queue @msq.
+ *	The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
+ *	@msq contains the message queue to act upon.  May be NULL.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.  
+ * @msg_queue_msgsnd:
+ *	Check permission before a message, @msg, is enqueued on the message
+ *	queue, @msq.
+ *	@msq contains the message queue to send message to.
+ *	@msg contains the message to be enqueued.
+ *	@msqflg contains operational flags.
+ *	Return 0 if permission is granted.
+ * @msg_queue_msgrcv:
+ *	Check permission before a message, @msg, is removed from the message
+ *	queue, @msq.  The @target task structure contains a pointer to the 
+ *	process that will be receiving the message (not equal to the current 
+ *	process when inline receives are being performed).
+ *	@msq contains the message queue to retrieve message from.
+ *	@msg contains the message destination.
+ *	@target contains the task structure for recipient process.
+ *	@type contains the type of message requested.
+ *	@mode contains the operational flags.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for System V Shared Memory Segments
+ *
+ * @shm_alloc_security:
+ *	Allocate and attach a security structure to the shp->shm_perm.security
+ *	field.  The security field is initialized to NULL when the structure is
+ *	first created.
+ *	@shp contains the shared memory structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @shm_free_security:
+ *	Deallocate the security struct for this memory segment.
+ *	@shp contains the shared memory structure to be modified.
+ * @shm_associate:
+ *	Check permission when a shared memory region is requested through the
+ *	shmget system call.  This hook is only called when returning the shared
+ *	memory region identifier for an existing region, not when a new shared
+ *	memory region is created.
+ *	@shp contains the shared memory structure to be modified.
+ *	@shmflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @shm_shmctl:
+ *	Check permission when a shared memory control operation specified by
+ *	@cmd is to be performed on the shared memory region @shp.
+ *	The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
+ *	@shp contains shared memory structure to be modified.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.
+ * @shm_shmat:
+ *	Check permissions prior to allowing the shmat system call to attach the
+ *	shared memory segment @shp to the data segment of the calling process.
+ *	The attaching address is specified by @shmaddr.
+ *	@shp contains the shared memory structure to be modified.
+ *	@shmaddr contains the address to attach memory region to.
+ *	@shmflg contains the operational flags.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for System V Semaphores
+ *
+ * @sem_alloc_security:
+ *	Allocate and attach a security structure to the sma->sem_perm.security
+ *	field.  The security field is initialized to NULL when the structure is
+ *	first created.
+ *	@sma contains the semaphore structure
+ *	Return 0 if operation was successful and permission is granted.
+ * @sem_free_security:
+ *	deallocate security struct for this semaphore
+ *	@sma contains the semaphore structure.
+ * @sem_associate:
+ *	Check permission when a semaphore is requested through the semget
+ *	system call.  This hook is only called when returning the semaphore
+ *	identifier for an existing semaphore, not when a new one must be
+ *	created.
+ *	@sma contains the semaphore structure.
+ *	@semflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @sem_semctl:
+ *	Check permission when a semaphore operation specified by @cmd is to be
+ *	performed on the semaphore @sma.  The @sma may be NULL, e.g. for 
+ *	IPC_INFO or SEM_INFO.
+ *	@sma contains the semaphore structure.  May be NULL.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.
+ * @sem_semop
+ *	Check permissions before performing operations on members of the
+ *	semaphore set @sma.  If the @alter flag is nonzero, the semaphore set 
+ *      may be modified.
+ *	@sma contains the semaphore structure.
+ *	@sops contains the operations to perform.
+ *	@nsops contains the number of operations to perform.
+ *	@alter contains the flag indicating whether changes are to be made.
+ *	Return 0 if permission is granted.
+ *
+ * @ptrace:
+ *	Check permission before allowing the @parent process to trace the
+ *	@child process.
+ *	Security modules may also want to perform a process tracing check
+ *	during an execve in the set_security or apply_creds hooks of
+ *	binprm_security_ops if the process is being traced and its security
+ *	attributes would be changed by the execve.
+ *	@parent contains the task_struct structure for parent process.
+ *	@child contains the task_struct structure for child process.
+ *	Return 0 if permission is granted.
+ * @capget:
+ *	Get the @effective, @inheritable, and @permitted capability sets for
+ *	the @target process.  The hook may also perform permission checking to
+ *	determine if the current process is allowed to see the capability sets
+ *	of the @target process.
+ *	@target contains the task_struct structure for target process.
+ *	@effective contains the effective capability set.
+ *	@inheritable contains the inheritable capability set.
+ *	@permitted contains the permitted capability set.
+ *	Return 0 if the capability sets were successfully obtained.
+ * @capset_check:
+ *	Check permission before setting the @effective, @inheritable, and
+ *	@permitted capability sets for the @target process.
+ *	Caveat:  @target is also set to current if a set of processes is
+ *	specified (i.e. all processes other than current and init or a
+ *	particular process group).  Hence, the capset_set hook may need to
+ *	revalidate permission to the actual target process.
+ *	@target contains the task_struct structure for target process.
+ *	@effective contains the effective capability set.
+ *	@inheritable contains the inheritable capability set.
+ *	@permitted contains the permitted capability set.
+ *	Return 0 if permission is granted.
+ * @capset_set:
+ *	Set the @effective, @inheritable, and @permitted capability sets for
+ *	the @target process.  Since capset_check cannot always check permission
+ *	to the real @target process, this hook may also perform permission
+ *	checking to determine if the current process is allowed to set the
+ *	capability sets of the @target process.  However, this hook has no way
+ *	of returning an error due to the structure of the sys_capset code.
+ *	@target contains the task_struct structure for target process.
+ *	@effective contains the effective capability set.
+ *	@inheritable contains the inheritable capability set.
+ *	@permitted contains the permitted capability set.
+ * @acct:
+ *	Check permission before enabling or disabling process accounting.  If
+ *	accounting is being enabled, then @file refers to the open file used to
+ *	store accounting records.  If accounting is being disabled, then @file
+ *	is NULL.
+ *	@file contains the file structure for the accounting file (may be NULL).
+ *	Return 0 if permission is granted.
+ * @sysctl:
+ *	Check permission before accessing the @table sysctl variable in the
+ *	manner specified by @op.
+ *	@table contains the ctl_table structure for the sysctl variable.
+ *	@op contains the operation (001 = search, 002 = write, 004 = read).
+ *	Return 0 if permission is granted.
+ * @capable:
+ *	Check whether the @tsk process has the @cap capability.
+ *	@tsk contains the task_struct for the process.
+ *	@cap contains the capability <include/linux/capability.h>.
+ *	Return 0 if the capability is granted for @tsk.
+ * @syslog:
+ *	Check permission before accessing the kernel message ring or changing
+ *	logging to the console.
+ *	See the syslog(2) manual page for an explanation of the @type values.  
+ *	@type contains the type of action.
+ *	Return 0 if permission is granted.
+ * @settime:
+ *	Check permission to change the system time.
+ *	struct timespec and timezone are defined in include/linux/time.h
+ *	@ts contains new time
+ *	@tz contains new timezone
+ *	Return 0 if permission is granted.
+ * @vm_enough_memory:
+ *	Check permissions for allocating a new virtual mapping.
+ *      @pages contains the number of pages.
+ *	Return 0 if permission is granted.
+ *
+ * @register_security:
+ * 	allow module stacking.
+ * 	@name contains the name of the security module being stacked.
+ * 	@ops contains a pointer to the struct security_operations of the module to stack.
+ * @unregister_security:
+ *	remove a stacked module.
+ *	@name contains the name of the security module being unstacked.
+ *	@ops contains a pointer to the struct security_operations of the module to unstack.
+ * 
+ * This is the main security structure.
+ */
+struct security_operations {
+	int (*ptrace) (struct task_struct * parent, struct task_struct * child);
+	int (*capget) (struct task_struct * target,
+		       kernel_cap_t * effective,
+		       kernel_cap_t * inheritable, kernel_cap_t * permitted);
+	int (*capset_check) (struct task_struct * target,
+			     kernel_cap_t * effective,
+			     kernel_cap_t * inheritable,
+			     kernel_cap_t * permitted);
+	void (*capset_set) (struct task_struct * target,
+			    kernel_cap_t * effective,
+			    kernel_cap_t * inheritable,
+			    kernel_cap_t * permitted);
+	int (*acct) (struct file * file);
+	int (*sysctl) (struct ctl_table * table, int op);
+	int (*capable) (struct task_struct * tsk, int cap);
+	int (*quotactl) (int cmds, int type, int id, struct super_block * sb);
+	int (*quota_on) (struct dentry * dentry);
+	int (*syslog) (int type);
+	int (*settime) (struct timespec *ts, struct timezone *tz);
+	int (*vm_enough_memory) (long pages);
+
+	int (*bprm_alloc_security) (struct linux_binprm * bprm);
+	void (*bprm_free_security) (struct linux_binprm * bprm);
+	void (*bprm_apply_creds) (struct linux_binprm * bprm, int unsafe);
+	void (*bprm_post_apply_creds) (struct linux_binprm * bprm);
+	int (*bprm_set_security) (struct linux_binprm * bprm);
+	int (*bprm_check_security) (struct linux_binprm * bprm);
+	int (*bprm_secureexec) (struct linux_binprm * bprm);
+
+	int (*sb_alloc_security) (struct super_block * sb);
+	void (*sb_free_security) (struct super_block * sb);
+	int (*sb_copy_data)(struct file_system_type *type,
+			    void *orig, void *copy);
+	int (*sb_kern_mount) (struct super_block *sb, void *data);
+	int (*sb_statfs) (struct super_block * sb);
+	int (*sb_mount) (char *dev_name, struct nameidata * nd,
+			 char *type, unsigned long flags, void *data);
+	int (*sb_check_sb) (struct vfsmount * mnt, struct nameidata * nd);
+	int (*sb_umount) (struct vfsmount * mnt, int flags);
+	void (*sb_umount_close) (struct vfsmount * mnt);
+	void (*sb_umount_busy) (struct vfsmount * mnt);
+	void (*sb_post_remount) (struct vfsmount * mnt,
+				 unsigned long flags, void *data);
+	void (*sb_post_mountroot) (void);
+	void (*sb_post_addmount) (struct vfsmount * mnt,
+				  struct nameidata * mountpoint_nd);
+	int (*sb_pivotroot) (struct nameidata * old_nd,
+			     struct nameidata * new_nd);
+	void (*sb_post_pivotroot) (struct nameidata * old_nd,
+				   struct nameidata * new_nd);
+
+	int (*inode_alloc_security) (struct inode *inode);	
+	void (*inode_free_security) (struct inode *inode);
+	int (*inode_create) (struct inode *dir,
+	                     struct dentry *dentry, int mode);
+	void (*inode_post_create) (struct inode *dir,
+	                           struct dentry *dentry, int mode);
+	int (*inode_link) (struct dentry *old_dentry,
+	                   struct inode *dir, struct dentry *new_dentry);
+	void (*inode_post_link) (struct dentry *old_dentry,
+	                         struct inode *dir, struct dentry *new_dentry);
+	int (*inode_unlink) (struct inode *dir, struct dentry *dentry);
+	int (*inode_symlink) (struct inode *dir,
+	                      struct dentry *dentry, const char *old_name);
+	void (*inode_post_symlink) (struct inode *dir,
+	                            struct dentry *dentry,
+	                            const char *old_name);
+	int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, int mode);
+	void (*inode_post_mkdir) (struct inode *dir, struct dentry *dentry, 
+			    int mode);
+	int (*inode_rmdir) (struct inode *dir, struct dentry *dentry);
+	int (*inode_mknod) (struct inode *dir, struct dentry *dentry,
+	                    int mode, dev_t dev);
+	void (*inode_post_mknod) (struct inode *dir, struct dentry *dentry,
+	                          int mode, dev_t dev);
+	int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry,
+	                     struct inode *new_dir, struct dentry *new_dentry);
+	void (*inode_post_rename) (struct inode *old_dir,
+	                           struct dentry *old_dentry,
+	                           struct inode *new_dir,
+	                           struct dentry *new_dentry);
+	int (*inode_readlink) (struct dentry *dentry);
+	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
+	int (*inode_permission) (struct inode *inode, int mask, struct nameidata *nd);
+	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
+	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
+        void (*inode_delete) (struct inode *inode);
+	int (*inode_setxattr) (struct dentry *dentry, char *name, void *value,
+			       size_t size, int flags);
+	void (*inode_post_setxattr) (struct dentry *dentry, char *name, void *value,
+				     size_t size, int flags);
+	int (*inode_getxattr) (struct dentry *dentry, char *name);
+	int (*inode_listxattr) (struct dentry *dentry);
+	int (*inode_removexattr) (struct dentry *dentry, char *name);
+  	int (*inode_getsecurity)(struct inode *inode, const char *name, void *buffer, size_t size);
+  	int (*inode_setsecurity)(struct inode *inode, const char *name, const void *value, size_t size, int flags);
+  	int (*inode_listsecurity)(struct inode *inode, char *buffer, size_t buffer_size);
+
+	int (*file_permission) (struct file * file, int mask);
+	int (*file_alloc_security) (struct file * file);
+	void (*file_free_security) (struct file * file);
+	int (*file_ioctl) (struct file * file, unsigned int cmd,
+			   unsigned long arg);
+	int (*file_mmap) (struct file * file,
+			  unsigned long reqprot,
+			  unsigned long prot, unsigned long flags);
+	int (*file_mprotect) (struct vm_area_struct * vma,
+			      unsigned long reqprot,
+			      unsigned long prot);
+	int (*file_lock) (struct file * file, unsigned int cmd);
+	int (*file_fcntl) (struct file * file, unsigned int cmd,
+			   unsigned long arg);
+	int (*file_set_fowner) (struct file * file);
+	int (*file_send_sigiotask) (struct task_struct * tsk,
+				    struct fown_struct * fown, int sig);
+	int (*file_receive) (struct file * file);
+
+	int (*task_create) (unsigned long clone_flags);
+	int (*task_alloc_security) (struct task_struct * p);
+	void (*task_free_security) (struct task_struct * p);
+	int (*task_setuid) (uid_t id0, uid_t id1, uid_t id2, int flags);
+	int (*task_post_setuid) (uid_t old_ruid /* or fsuid */ ,
+				 uid_t old_euid, uid_t old_suid, int flags);
+	int (*task_setgid) (gid_t id0, gid_t id1, gid_t id2, int flags);
+	int (*task_setpgid) (struct task_struct * p, pid_t pgid);
+	int (*task_getpgid) (struct task_struct * p);
+	int (*task_getsid) (struct task_struct * p);
+	int (*task_setgroups) (struct group_info *group_info);
+	int (*task_setnice) (struct task_struct * p, int nice);
+	int (*task_setrlimit) (unsigned int resource, struct rlimit * new_rlim);
+	int (*task_setscheduler) (struct task_struct * p, int policy,
+				  struct sched_param * lp);
+	int (*task_getscheduler) (struct task_struct * p);
+	int (*task_kill) (struct task_struct * p,
+			  struct siginfo * info, int sig);
+	int (*task_wait) (struct task_struct * p);
+	int (*task_prctl) (int option, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4,
+			   unsigned long arg5);
+	void (*task_reparent_to_init) (struct task_struct * p);
+	void (*task_to_inode)(struct task_struct *p, struct inode *inode);
+
+	int (*ipc_permission) (struct kern_ipc_perm * ipcp, short flag);
+
+	int (*msg_msg_alloc_security) (struct msg_msg * msg);
+	void (*msg_msg_free_security) (struct msg_msg * msg);
+
+	int (*msg_queue_alloc_security) (struct msg_queue * msq);
+	void (*msg_queue_free_security) (struct msg_queue * msq);
+	int (*msg_queue_associate) (struct msg_queue * msq, int msqflg);
+	int (*msg_queue_msgctl) (struct msg_queue * msq, int cmd);
+	int (*msg_queue_msgsnd) (struct msg_queue * msq,
+				 struct msg_msg * msg, int msqflg);
+	int (*msg_queue_msgrcv) (struct msg_queue * msq,
+				 struct msg_msg * msg,
+				 struct task_struct * target,
+				 long type, int mode);
+
+	int (*shm_alloc_security) (struct shmid_kernel * shp);
+	void (*shm_free_security) (struct shmid_kernel * shp);
+	int (*shm_associate) (struct shmid_kernel * shp, int shmflg);
+	int (*shm_shmctl) (struct shmid_kernel * shp, int cmd);
+	int (*shm_shmat) (struct shmid_kernel * shp, 
+			  char __user *shmaddr, int shmflg);
+
+	int (*sem_alloc_security) (struct sem_array * sma);
+	void (*sem_free_security) (struct sem_array * sma);
+	int (*sem_associate) (struct sem_array * sma, int semflg);
+	int (*sem_semctl) (struct sem_array * sma, int cmd);
+	int (*sem_semop) (struct sem_array * sma, 
+			  struct sembuf * sops, unsigned nsops, int alter);
+
+	int (*netlink_send) (struct sock * sk, struct sk_buff * skb);
+	int (*netlink_recv) (struct sk_buff * skb);
+
+	/* allow module stacking */
+	int (*register_security) (const char *name,
+	                          struct security_operations *ops);
+	int (*unregister_security) (const char *name,
+	                            struct security_operations *ops);
+
+	void (*d_instantiate) (struct dentry *dentry, struct inode *inode);
+
+ 	int (*getprocattr)(struct task_struct *p, char *name, void *value, size_t size);
+ 	int (*setprocattr)(struct task_struct *p, char *name, void *value, size_t size);
+
+#ifdef CONFIG_SECURITY_NETWORK
+	int (*unix_stream_connect) (struct socket * sock,
+				    struct socket * other, struct sock * newsk);
+	int (*unix_may_send) (struct socket * sock, struct socket * other);
+
+	int (*socket_create) (int family, int type, int protocol, int kern);
+	void (*socket_post_create) (struct socket * sock, int family,
+				    int type, int protocol, int kern);
+	int (*socket_bind) (struct socket * sock,
+			    struct sockaddr * address, int addrlen);
+	int (*socket_connect) (struct socket * sock,
+			       struct sockaddr * address, int addrlen);
+	int (*socket_listen) (struct socket * sock, int backlog);
+	int (*socket_accept) (struct socket * sock, struct socket * newsock);
+	void (*socket_post_accept) (struct socket * sock,
+				    struct socket * newsock);
+	int (*socket_sendmsg) (struct socket * sock,
+			       struct msghdr * msg, int size);
+	int (*socket_recvmsg) (struct socket * sock,
+			       struct msghdr * msg, int size, int flags);
+	int (*socket_getsockname) (struct socket * sock);
+	int (*socket_getpeername) (struct socket * sock);
+	int (*socket_getsockopt) (struct socket * sock, int level, int optname);
+	int (*socket_setsockopt) (struct socket * sock, int level, int optname);
+	int (*socket_shutdown) (struct socket * sock, int how);
+	int (*socket_sock_rcv_skb) (struct sock * sk, struct sk_buff * skb);
+	int (*socket_getpeersec) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len);
+	int (*sk_alloc_security) (struct sock *sk, int family, int priority);
+	void (*sk_free_security) (struct sock *sk);
+#endif	/* CONFIG_SECURITY_NETWORK */
+};
+
+/* global variables */
+extern struct security_operations *security_ops;
+
+/* inline stuff */
+static inline int security_ptrace (struct task_struct * parent, struct task_struct * child)
+{
+	return security_ops->ptrace (parent, child);
+}
+
+static inline int security_capget (struct task_struct *target,
+				   kernel_cap_t *effective,
+				   kernel_cap_t *inheritable,
+				   kernel_cap_t *permitted)
+{
+	return security_ops->capget (target, effective, inheritable, permitted);
+}
+
+static inline int security_capset_check (struct task_struct *target,
+					 kernel_cap_t *effective,
+					 kernel_cap_t *inheritable,
+					 kernel_cap_t *permitted)
+{
+	return security_ops->capset_check (target, effective, inheritable, permitted);
+}
+
+static inline void security_capset_set (struct task_struct *target,
+					kernel_cap_t *effective,
+					kernel_cap_t *inheritable,
+					kernel_cap_t *permitted)
+{
+	security_ops->capset_set (target, effective, inheritable, permitted);
+}
+
+static inline int security_acct (struct file *file)
+{
+	return security_ops->acct (file);
+}
+
+static inline int security_sysctl(struct ctl_table *table, int op)
+{
+	return security_ops->sysctl(table, op);
+}
+
+static inline int security_quotactl (int cmds, int type, int id,
+				     struct super_block *sb)
+{
+	return security_ops->quotactl (cmds, type, id, sb);
+}
+
+static inline int security_quota_on (struct dentry * dentry)
+{
+	return security_ops->quota_on (dentry);
+}
+
+static inline int security_syslog(int type)
+{
+	return security_ops->syslog(type);
+}
+
+static inline int security_settime(struct timespec *ts, struct timezone *tz)
+{
+	return security_ops->settime(ts, tz);
+}
+
+
+static inline int security_vm_enough_memory(long pages)
+{
+	return security_ops->vm_enough_memory(pages);
+}
+
+static inline int security_bprm_alloc (struct linux_binprm *bprm)
+{
+	return security_ops->bprm_alloc_security (bprm);
+}
+static inline void security_bprm_free (struct linux_binprm *bprm)
+{
+	security_ops->bprm_free_security (bprm);
+}
+static inline void security_bprm_apply_creds (struct linux_binprm *bprm, int unsafe)
+{
+	security_ops->bprm_apply_creds (bprm, unsafe);
+}
+static inline void security_bprm_post_apply_creds (struct linux_binprm *bprm)
+{
+	security_ops->bprm_post_apply_creds (bprm);
+}
+static inline int security_bprm_set (struct linux_binprm *bprm)
+{
+	return security_ops->bprm_set_security (bprm);
+}
+
+static inline int security_bprm_check (struct linux_binprm *bprm)
+{
+	return security_ops->bprm_check_security (bprm);
+}
+
+static inline int security_bprm_secureexec (struct linux_binprm *bprm)
+{
+	return security_ops->bprm_secureexec (bprm);
+}
+
+static inline int security_sb_alloc (struct super_block *sb)
+{
+	return security_ops->sb_alloc_security (sb);
+}
+
+static inline void security_sb_free (struct super_block *sb)
+{
+	security_ops->sb_free_security (sb);
+}
+
+static inline int security_sb_copy_data (struct file_system_type *type,
+					 void *orig, void *copy)
+{
+	return security_ops->sb_copy_data (type, orig, copy);
+}
+
+static inline int security_sb_kern_mount (struct super_block *sb, void *data)
+{
+	return security_ops->sb_kern_mount (sb, data);
+}
+
+static inline int security_sb_statfs (struct super_block *sb)
+{
+	return security_ops->sb_statfs (sb);
+}
+
+static inline int security_sb_mount (char *dev_name, struct nameidata *nd,
+				    char *type, unsigned long flags,
+				    void *data)
+{
+	return security_ops->sb_mount (dev_name, nd, type, flags, data);
+}
+
+static inline int security_sb_check_sb (struct vfsmount *mnt,
+					struct nameidata *nd)
+{
+	return security_ops->sb_check_sb (mnt, nd);
+}
+
+static inline int security_sb_umount (struct vfsmount *mnt, int flags)
+{
+	return security_ops->sb_umount (mnt, flags);
+}
+
+static inline void security_sb_umount_close (struct vfsmount *mnt)
+{
+	security_ops->sb_umount_close (mnt);
+}
+
+static inline void security_sb_umount_busy (struct vfsmount *mnt)
+{
+	security_ops->sb_umount_busy (mnt);
+}
+
+static inline void security_sb_post_remount (struct vfsmount *mnt,
+					     unsigned long flags, void *data)
+{
+	security_ops->sb_post_remount (mnt, flags, data);
+}
+
+static inline void security_sb_post_mountroot (void)
+{
+	security_ops->sb_post_mountroot ();
+}
+
+static inline void security_sb_post_addmount (struct vfsmount *mnt,
+					      struct nameidata *mountpoint_nd)
+{
+	security_ops->sb_post_addmount (mnt, mountpoint_nd);
+}
+
+static inline int security_sb_pivotroot (struct nameidata *old_nd,
+					 struct nameidata *new_nd)
+{
+	return security_ops->sb_pivotroot (old_nd, new_nd);
+}
+
+static inline void security_sb_post_pivotroot (struct nameidata *old_nd,
+					       struct nameidata *new_nd)
+{
+	security_ops->sb_post_pivotroot (old_nd, new_nd);
+}
+
+static inline int security_inode_alloc (struct inode *inode)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return 0;
+	return security_ops->inode_alloc_security (inode);
+}
+
+static inline void security_inode_free (struct inode *inode)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return;
+	security_ops->inode_free_security (inode);
+}
+	
+static inline int security_inode_create (struct inode *dir,
+					 struct dentry *dentry,
+					 int mode)
+{
+	if (unlikely (IS_PRIVATE (dir)))
+		return 0;
+	return security_ops->inode_create (dir, dentry, mode);
+}
+
+static inline void security_inode_post_create (struct inode *dir,
+					       struct dentry *dentry,
+					       int mode)
+{
+	if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode)))
+		return;
+	security_ops->inode_post_create (dir, dentry, mode);
+}
+
+static inline int security_inode_link (struct dentry *old_dentry,
+				       struct inode *dir,
+				       struct dentry *new_dentry)
+{
+	if (unlikely (IS_PRIVATE (old_dentry->d_inode)))
+		return 0;
+	return security_ops->inode_link (old_dentry, dir, new_dentry);
+}
+
+static inline void security_inode_post_link (struct dentry *old_dentry,
+					     struct inode *dir,
+					     struct dentry *new_dentry)
+{
+	if (new_dentry->d_inode && unlikely (IS_PRIVATE (new_dentry->d_inode)))
+		return;
+	security_ops->inode_post_link (old_dentry, dir, new_dentry);
+}
+
+static inline int security_inode_unlink (struct inode *dir,
+					 struct dentry *dentry)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_unlink (dir, dentry);
+}
+
+static inline int security_inode_symlink (struct inode *dir,
+					  struct dentry *dentry,
+					  const char *old_name)
+{
+	if (unlikely (IS_PRIVATE (dir)))
+		return 0;
+	return security_ops->inode_symlink (dir, dentry, old_name);
+}
+
+static inline void security_inode_post_symlink (struct inode *dir,
+						struct dentry *dentry,
+						const char *old_name)
+{
+	if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode)))
+		return;
+	security_ops->inode_post_symlink (dir, dentry, old_name);
+}
+
+static inline int security_inode_mkdir (struct inode *dir,
+					struct dentry *dentry,
+					int mode)
+{
+	if (unlikely (IS_PRIVATE (dir)))
+		return 0;
+	return security_ops->inode_mkdir (dir, dentry, mode);
+}
+
+static inline void security_inode_post_mkdir (struct inode *dir,
+					      struct dentry *dentry,
+					      int mode)
+{
+	if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode)))
+		return;
+	security_ops->inode_post_mkdir (dir, dentry, mode);
+}
+
+static inline int security_inode_rmdir (struct inode *dir,
+					struct dentry *dentry)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_rmdir (dir, dentry);
+}
+
+static inline int security_inode_mknod (struct inode *dir,
+					struct dentry *dentry,
+					int mode, dev_t dev)
+{
+	if (unlikely (IS_PRIVATE (dir)))
+		return 0;
+	return security_ops->inode_mknod (dir, dentry, mode, dev);
+}
+
+static inline void security_inode_post_mknod (struct inode *dir,
+					      struct dentry *dentry,
+					      int mode, dev_t dev)
+{
+	if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode)))
+		return;
+	security_ops->inode_post_mknod (dir, dentry, mode, dev);
+}
+
+static inline int security_inode_rename (struct inode *old_dir,
+					 struct dentry *old_dentry,
+					 struct inode *new_dir,
+					 struct dentry *new_dentry)
+{
+        if (unlikely (IS_PRIVATE (old_dentry->d_inode) ||
+            (new_dentry->d_inode && IS_PRIVATE (new_dentry->d_inode))))
+		return 0;
+	return security_ops->inode_rename (old_dir, old_dentry,
+					   new_dir, new_dentry);
+}
+
+static inline void security_inode_post_rename (struct inode *old_dir,
+					       struct dentry *old_dentry,
+					       struct inode *new_dir,
+					       struct dentry *new_dentry)
+{
+	if (unlikely (IS_PRIVATE (old_dentry->d_inode) ||
+	    (new_dentry->d_inode && IS_PRIVATE (new_dentry->d_inode))))
+		return;
+	security_ops->inode_post_rename (old_dir, old_dentry,
+						new_dir, new_dentry);
+}
+
+static inline int security_inode_readlink (struct dentry *dentry)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_readlink (dentry);
+}
+
+static inline int security_inode_follow_link (struct dentry *dentry,
+					      struct nameidata *nd)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_follow_link (dentry, nd);
+}
+
+static inline int security_inode_permission (struct inode *inode, int mask,
+					     struct nameidata *nd)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return 0;
+	return security_ops->inode_permission (inode, mask, nd);
+}
+
+static inline int security_inode_setattr (struct dentry *dentry,
+					  struct iattr *attr)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_setattr (dentry, attr);
+}
+
+static inline int security_inode_getattr (struct vfsmount *mnt,
+					  struct dentry *dentry)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_getattr (mnt, dentry);
+}
+
+static inline void security_inode_delete (struct inode *inode)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return;
+	security_ops->inode_delete (inode);
+}
+
+static inline int security_inode_setxattr (struct dentry *dentry, char *name,
+					   void *value, size_t size, int flags)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_setxattr (dentry, name, value, size, flags);
+}
+
+static inline void security_inode_post_setxattr (struct dentry *dentry, char *name,
+						void *value, size_t size, int flags)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return;
+	security_ops->inode_post_setxattr (dentry, name, value, size, flags);
+}
+
+static inline int security_inode_getxattr (struct dentry *dentry, char *name)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_getxattr (dentry, name);
+}
+
+static inline int security_inode_listxattr (struct dentry *dentry)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_listxattr (dentry);
+}
+
+static inline int security_inode_removexattr (struct dentry *dentry, char *name)
+{
+	if (unlikely (IS_PRIVATE (dentry->d_inode)))
+		return 0;
+	return security_ops->inode_removexattr (dentry, name);
+}
+
+static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return 0;
+	return security_ops->inode_getsecurity(inode, name, buffer, size);
+}
+
+static inline int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return 0;
+	return security_ops->inode_setsecurity(inode, name, value, size, flags);
+}
+
+static inline int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size)
+{
+	if (unlikely (IS_PRIVATE (inode)))
+		return 0;
+	return security_ops->inode_listsecurity(inode, buffer, buffer_size);
+}
+
+static inline int security_file_permission (struct file *file, int mask)
+{
+	return security_ops->file_permission (file, mask);
+}
+
+static inline int security_file_alloc (struct file *file)
+{
+	return security_ops->file_alloc_security (file);
+}
+
+static inline void security_file_free (struct file *file)
+{
+	security_ops->file_free_security (file);
+}
+
+static inline int security_file_ioctl (struct file *file, unsigned int cmd,
+				       unsigned long arg)
+{
+	return security_ops->file_ioctl (file, cmd, arg);
+}
+
+static inline int security_file_mmap (struct file *file, unsigned long reqprot,
+				      unsigned long prot,
+				      unsigned long flags)
+{
+	return security_ops->file_mmap (file, reqprot, prot, flags);
+}
+
+static inline int security_file_mprotect (struct vm_area_struct *vma,
+					  unsigned long reqprot,
+					  unsigned long prot)
+{
+	return security_ops->file_mprotect (vma, reqprot, prot);
+}
+
+static inline int security_file_lock (struct file *file, unsigned int cmd)
+{
+	return security_ops->file_lock (file, cmd);
+}
+
+static inline int security_file_fcntl (struct file *file, unsigned int cmd,
+				       unsigned long arg)
+{
+	return security_ops->file_fcntl (file, cmd, arg);
+}
+
+static inline int security_file_set_fowner (struct file *file)
+{
+	return security_ops->file_set_fowner (file);
+}
+
+static inline int security_file_send_sigiotask (struct task_struct *tsk,
+						struct fown_struct *fown,
+						int sig)
+{
+	return security_ops->file_send_sigiotask (tsk, fown, sig);
+}
+
+static inline int security_file_receive (struct file *file)
+{
+	return security_ops->file_receive (file);
+}
+
+static inline int security_task_create (unsigned long clone_flags)
+{
+	return security_ops->task_create (clone_flags);
+}
+
+static inline int security_task_alloc (struct task_struct *p)
+{
+	return security_ops->task_alloc_security (p);
+}
+
+static inline void security_task_free (struct task_struct *p)
+{
+	security_ops->task_free_security (p);
+}
+
+static inline int security_task_setuid (uid_t id0, uid_t id1, uid_t id2,
+					int flags)
+{
+	return security_ops->task_setuid (id0, id1, id2, flags);
+}
+
+static inline int security_task_post_setuid (uid_t old_ruid, uid_t old_euid,
+					     uid_t old_suid, int flags)
+{
+	return security_ops->task_post_setuid (old_ruid, old_euid, old_suid, flags);
+}
+
+static inline int security_task_setgid (gid_t id0, gid_t id1, gid_t id2,
+					int flags)
+{
+	return security_ops->task_setgid (id0, id1, id2, flags);
+}
+
+static inline int security_task_setpgid (struct task_struct *p, pid_t pgid)
+{
+	return security_ops->task_setpgid (p, pgid);
+}
+
+static inline int security_task_getpgid (struct task_struct *p)
+{
+	return security_ops->task_getpgid (p);
+}
+
+static inline int security_task_getsid (struct task_struct *p)
+{
+	return security_ops->task_getsid (p);
+}
+
+static inline int security_task_setgroups (struct group_info *group_info)
+{
+	return security_ops->task_setgroups (group_info);
+}
+
+static inline int security_task_setnice (struct task_struct *p, int nice)
+{
+	return security_ops->task_setnice (p, nice);
+}
+
+static inline int security_task_setrlimit (unsigned int resource,
+					   struct rlimit *new_rlim)
+{
+	return security_ops->task_setrlimit (resource, new_rlim);
+}
+
+static inline int security_task_setscheduler (struct task_struct *p,
+					      int policy,
+					      struct sched_param *lp)
+{
+	return security_ops->task_setscheduler (p, policy, lp);
+}
+
+static inline int security_task_getscheduler (struct task_struct *p)
+{
+	return security_ops->task_getscheduler (p);
+}
+
+static inline int security_task_kill (struct task_struct *p,
+				      struct siginfo *info, int sig)
+{
+	return security_ops->task_kill (p, info, sig);
+}
+
+static inline int security_task_wait (struct task_struct *p)
+{
+	return security_ops->task_wait (p);
+}
+
+static inline int security_task_prctl (int option, unsigned long arg2,
+				       unsigned long arg3,
+				       unsigned long arg4,
+				       unsigned long arg5)
+{
+	return security_ops->task_prctl (option, arg2, arg3, arg4, arg5);
+}
+
+static inline void security_task_reparent_to_init (struct task_struct *p)
+{
+	security_ops->task_reparent_to_init (p);
+}
+
+static inline void security_task_to_inode(struct task_struct *p, struct inode *inode)
+{
+	security_ops->task_to_inode(p, inode);
+}
+
+static inline int security_ipc_permission (struct kern_ipc_perm *ipcp,
+					   short flag)
+{
+	return security_ops->ipc_permission (ipcp, flag);
+}
+
+static inline int security_msg_msg_alloc (struct msg_msg * msg)
+{
+	return security_ops->msg_msg_alloc_security (msg);
+}
+
+static inline void security_msg_msg_free (struct msg_msg * msg)
+{
+	security_ops->msg_msg_free_security(msg);
+}
+
+static inline int security_msg_queue_alloc (struct msg_queue *msq)
+{
+	return security_ops->msg_queue_alloc_security (msq);
+}
+
+static inline void security_msg_queue_free (struct msg_queue *msq)
+{
+	security_ops->msg_queue_free_security (msq);
+}
+
+static inline int security_msg_queue_associate (struct msg_queue * msq, 
+						int msqflg)
+{
+	return security_ops->msg_queue_associate (msq, msqflg);
+}
+
+static inline int security_msg_queue_msgctl (struct msg_queue * msq, int cmd)
+{
+	return security_ops->msg_queue_msgctl (msq, cmd);
+}
+
+static inline int security_msg_queue_msgsnd (struct msg_queue * msq,
+					     struct msg_msg * msg, int msqflg)
+{
+	return security_ops->msg_queue_msgsnd (msq, msg, msqflg);
+}
+
+static inline int security_msg_queue_msgrcv (struct msg_queue * msq,
+					     struct msg_msg * msg,
+					     struct task_struct * target,
+					     long type, int mode)
+{
+	return security_ops->msg_queue_msgrcv (msq, msg, target, type, mode);
+}
+
+static inline int security_shm_alloc (struct shmid_kernel *shp)
+{
+	return security_ops->shm_alloc_security (shp);
+}
+
+static inline void security_shm_free (struct shmid_kernel *shp)
+{
+	security_ops->shm_free_security (shp);
+}
+
+static inline int security_shm_associate (struct shmid_kernel * shp, 
+					  int shmflg)
+{
+	return security_ops->shm_associate(shp, shmflg);
+}
+
+static inline int security_shm_shmctl (struct shmid_kernel * shp, int cmd)
+{
+	return security_ops->shm_shmctl (shp, cmd);
+}
+
+static inline int security_shm_shmat (struct shmid_kernel * shp, 
+				      char __user *shmaddr, int shmflg)
+{
+	return security_ops->shm_shmat(shp, shmaddr, shmflg);
+}
+
+static inline int security_sem_alloc (struct sem_array *sma)
+{
+	return security_ops->sem_alloc_security (sma);
+}
+
+static inline void security_sem_free (struct sem_array *sma)
+{
+	security_ops->sem_free_security (sma);
+}
+
+static inline int security_sem_associate (struct sem_array * sma, int semflg)
+{
+	return security_ops->sem_associate (sma, semflg);
+}
+
+static inline int security_sem_semctl (struct sem_array * sma, int cmd)
+{
+	return security_ops->sem_semctl(sma, cmd);
+}
+
+static inline int security_sem_semop (struct sem_array * sma, 
+				      struct sembuf * sops, unsigned nsops, 
+				      int alter)
+{
+	return security_ops->sem_semop(sma, sops, nsops, alter);
+}
+
+static inline void security_d_instantiate (struct dentry *dentry, struct inode *inode)
+{
+	if (unlikely (inode && IS_PRIVATE (inode)))
+		return;
+	security_ops->d_instantiate (dentry, inode);
+}
+
+static inline int security_getprocattr(struct task_struct *p, char *name, void *value, size_t size)
+{
+	return security_ops->getprocattr(p, name, value, size);
+}
+
+static inline int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size)
+{
+	return security_ops->setprocattr(p, name, value, size);
+}
+
+static inline int security_netlink_send(struct sock *sk, struct sk_buff * skb)
+{
+	return security_ops->netlink_send(sk, skb);
+}
+
+static inline int security_netlink_recv(struct sk_buff * skb)
+{
+	return security_ops->netlink_recv(skb);
+}
+
+/* prototypes */
+extern int security_init	(void);
+extern int register_security	(struct security_operations *ops);
+extern int unregister_security	(struct security_operations *ops);
+extern int mod_reg_security	(const char *name, struct security_operations *ops);
+extern int mod_unreg_security	(const char *name, struct security_operations *ops);
+
+
+#else /* CONFIG_SECURITY */
+
+/*
+ * This is the default capabilities functionality.  Most of these functions
+ * are just stubbed out, but a few must call the proper capable code.
+ */
+
+static inline int security_init(void)
+{
+	return 0;
+}
+
+static inline int security_ptrace (struct task_struct *parent, struct task_struct * child)
+{
+	return cap_ptrace (parent, child);
+}
+
+static inline int security_capget (struct task_struct *target,
+				   kernel_cap_t *effective,
+				   kernel_cap_t *inheritable,
+				   kernel_cap_t *permitted)
+{
+	return cap_capget (target, effective, inheritable, permitted);
+}
+
+static inline int security_capset_check (struct task_struct *target,
+					 kernel_cap_t *effective,
+					 kernel_cap_t *inheritable,
+					 kernel_cap_t *permitted)
+{
+	return cap_capset_check (target, effective, inheritable, permitted);
+}
+
+static inline void security_capset_set (struct task_struct *target,
+					kernel_cap_t *effective,
+					kernel_cap_t *inheritable,
+					kernel_cap_t *permitted)
+{
+	cap_capset_set (target, effective, inheritable, permitted);
+}
+
+static inline int security_acct (struct file *file)
+{
+	return 0;
+}
+
+static inline int security_sysctl(struct ctl_table *table, int op)
+{
+	return 0;
+}
+
+static inline int security_quotactl (int cmds, int type, int id,
+				     struct super_block * sb)
+{
+	return 0;
+}
+
+static inline int security_quota_on (struct dentry * dentry)
+{
+	return 0;
+}
+
+static inline int security_syslog(int type)
+{
+	return cap_syslog(type);
+}
+
+static inline int security_settime(struct timespec *ts, struct timezone *tz)
+{
+	return cap_settime(ts, tz);
+}
+
+static inline int security_vm_enough_memory(long pages)
+{
+	return cap_vm_enough_memory(pages);
+}
+
+static inline int security_bprm_alloc (struct linux_binprm *bprm)
+{
+	return 0;
+}
+
+static inline void security_bprm_free (struct linux_binprm *bprm)
+{ }
+
+static inline void security_bprm_apply_creds (struct linux_binprm *bprm, int unsafe)
+{ 
+	cap_bprm_apply_creds (bprm, unsafe);
+}
+
+static inline void security_bprm_post_apply_creds (struct linux_binprm *bprm)
+{
+	return;
+}
+
+static inline int security_bprm_set (struct linux_binprm *bprm)
+{
+	return cap_bprm_set_security (bprm);
+}
+
+static inline int security_bprm_check (struct linux_binprm *bprm)
+{
+	return 0;
+}
+
+static inline int security_bprm_secureexec (struct linux_binprm *bprm)
+{
+	return cap_bprm_secureexec(bprm);
+}
+
+static inline int security_sb_alloc (struct super_block *sb)
+{
+	return 0;
+}
+
+static inline void security_sb_free (struct super_block *sb)
+{ }
+
+static inline int security_sb_copy_data (struct file_system_type *type,
+					 void *orig, void *copy)
+{
+	return 0;
+}
+
+static inline int security_sb_kern_mount (struct super_block *sb, void *data)
+{
+	return 0;
+}
+
+static inline int security_sb_statfs (struct super_block *sb)
+{
+	return 0;
+}
+
+static inline int security_sb_mount (char *dev_name, struct nameidata *nd,
+				    char *type, unsigned long flags,
+				    void *data)
+{
+	return 0;
+}
+
+static inline int security_sb_check_sb (struct vfsmount *mnt,
+					struct nameidata *nd)
+{
+	return 0;
+}
+
+static inline int security_sb_umount (struct vfsmount *mnt, int flags)
+{
+	return 0;
+}
+
+static inline void security_sb_umount_close (struct vfsmount *mnt)
+{ }
+
+static inline void security_sb_umount_busy (struct vfsmount *mnt)
+{ }
+
+static inline void security_sb_post_remount (struct vfsmount *mnt,
+					     unsigned long flags, void *data)
+{ }
+
+static inline void security_sb_post_mountroot (void)
+{ }
+
+static inline void security_sb_post_addmount (struct vfsmount *mnt,
+					      struct nameidata *mountpoint_nd)
+{ }
+
+static inline int security_sb_pivotroot (struct nameidata *old_nd,
+					 struct nameidata *new_nd)
+{
+	return 0;
+}
+
+static inline void security_sb_post_pivotroot (struct nameidata *old_nd,
+					       struct nameidata *new_nd)
+{ }
+
+static inline int security_inode_alloc (struct inode *inode)
+{
+	return 0;
+}
+
+static inline void security_inode_free (struct inode *inode)
+{ }
+	
+static inline int security_inode_create (struct inode *dir,
+					 struct dentry *dentry,
+					 int mode)
+{
+	return 0;
+}
+
+static inline void security_inode_post_create (struct inode *dir,
+					       struct dentry *dentry,
+					       int mode)
+{ }
+
+static inline int security_inode_link (struct dentry *old_dentry,
+				       struct inode *dir,
+				       struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline void security_inode_post_link (struct dentry *old_dentry,
+					     struct inode *dir,
+					     struct dentry *new_dentry)
+{ }
+
+static inline int security_inode_unlink (struct inode *dir,
+					 struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_symlink (struct inode *dir,
+					  struct dentry *dentry,
+					  const char *old_name)
+{
+	return 0;
+}
+
+static inline void security_inode_post_symlink (struct inode *dir,
+						struct dentry *dentry,
+						const char *old_name)
+{ }
+
+static inline int security_inode_mkdir (struct inode *dir,
+					struct dentry *dentry,
+					int mode)
+{
+	return 0;
+}
+
+static inline void security_inode_post_mkdir (struct inode *dir,
+					      struct dentry *dentry,
+					      int mode)
+{ }
+
+static inline int security_inode_rmdir (struct inode *dir,
+					struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_mknod (struct inode *dir,
+					struct dentry *dentry,
+					int mode, dev_t dev)
+{
+	return 0;
+}
+
+static inline void security_inode_post_mknod (struct inode *dir,
+					      struct dentry *dentry,
+					      int mode, dev_t dev)
+{ }
+
+static inline int security_inode_rename (struct inode *old_dir,
+					 struct dentry *old_dentry,
+					 struct inode *new_dir,
+					 struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline void security_inode_post_rename (struct inode *old_dir,
+					       struct dentry *old_dentry,
+					       struct inode *new_dir,
+					       struct dentry *new_dentry)
+{ }
+
+static inline int security_inode_readlink (struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_follow_link (struct dentry *dentry,
+					      struct nameidata *nd)
+{
+	return 0;
+}
+
+static inline int security_inode_permission (struct inode *inode, int mask,
+					     struct nameidata *nd)
+{
+	return 0;
+}
+
+static inline int security_inode_setattr (struct dentry *dentry,
+					  struct iattr *attr)
+{
+	return 0;
+}
+
+static inline int security_inode_getattr (struct vfsmount *mnt,
+					  struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline void security_inode_delete (struct inode *inode)
+{ }
+
+static inline int security_inode_setxattr (struct dentry *dentry, char *name,
+					   void *value, size_t size, int flags)
+{
+	return cap_inode_setxattr(dentry, name, value, size, flags);
+}
+
+static inline void security_inode_post_setxattr (struct dentry *dentry, char *name,
+						 void *value, size_t size, int flags)
+{ }
+
+static inline int security_inode_getxattr (struct dentry *dentry, char *name)
+{
+	return 0;
+}
+
+static inline int security_inode_listxattr (struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_removexattr (struct dentry *dentry, char *name)
+{
+	return cap_inode_removexattr(dentry, name);
+}
+
+static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size)
+{
+	return 0;
+}
+
+static inline int security_file_permission (struct file *file, int mask)
+{
+	return 0;
+}
+
+static inline int security_file_alloc (struct file *file)
+{
+	return 0;
+}
+
+static inline void security_file_free (struct file *file)
+{ }
+
+static inline int security_file_ioctl (struct file *file, unsigned int cmd,
+				       unsigned long arg)
+{
+	return 0;
+}
+
+static inline int security_file_mmap (struct file *file, unsigned long reqprot,
+				      unsigned long prot,
+				      unsigned long flags)
+{
+	return 0;
+}
+
+static inline int security_file_mprotect (struct vm_area_struct *vma,
+					  unsigned long reqprot,
+					  unsigned long prot)
+{
+	return 0;
+}
+
+static inline int security_file_lock (struct file *file, unsigned int cmd)
+{
+	return 0;
+}
+
+static inline int security_file_fcntl (struct file *file, unsigned int cmd,
+				       unsigned long arg)
+{
+	return 0;
+}
+
+static inline int security_file_set_fowner (struct file *file)
+{
+	return 0;
+}
+
+static inline int security_file_send_sigiotask (struct task_struct *tsk,
+						struct fown_struct *fown,
+						int sig)
+{
+	return 0;
+}
+
+static inline int security_file_receive (struct file *file)
+{
+	return 0;
+}
+
+static inline int security_task_create (unsigned long clone_flags)
+{
+	return 0;
+}
+
+static inline int security_task_alloc (struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void security_task_free (struct task_struct *p)
+{ }
+
+static inline int security_task_setuid (uid_t id0, uid_t id1, uid_t id2,
+					int flags)
+{
+	return 0;
+}
+
+static inline int security_task_post_setuid (uid_t old_ruid, uid_t old_euid,
+					     uid_t old_suid, int flags)
+{
+	return cap_task_post_setuid (old_ruid, old_euid, old_suid, flags);
+}
+
+static inline int security_task_setgid (gid_t id0, gid_t id1, gid_t id2,
+					int flags)
+{
+	return 0;
+}
+
+static inline int security_task_setpgid (struct task_struct *p, pid_t pgid)
+{
+	return 0;
+}
+
+static inline int security_task_getpgid (struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_getsid (struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_setgroups (struct group_info *group_info)
+{
+	return 0;
+}
+
+static inline int security_task_setnice (struct task_struct *p, int nice)
+{
+	return 0;
+}
+
+static inline int security_task_setrlimit (unsigned int resource,
+					   struct rlimit *new_rlim)
+{
+	return 0;
+}
+
+static inline int security_task_setscheduler (struct task_struct *p,
+					      int policy,
+					      struct sched_param *lp)
+{
+	return 0;
+}
+
+static inline int security_task_getscheduler (struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_kill (struct task_struct *p,
+				      struct siginfo *info, int sig)
+{
+	return 0;
+}
+
+static inline int security_task_wait (struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_prctl (int option, unsigned long arg2,
+				       unsigned long arg3,
+				       unsigned long arg4,
+				       unsigned long arg5)
+{
+	return 0;
+}
+
+static inline void security_task_reparent_to_init (struct task_struct *p)
+{
+	cap_task_reparent_to_init (p);
+}
+
+static inline void security_task_to_inode(struct task_struct *p, struct inode *inode)
+{ }
+
+static inline int security_ipc_permission (struct kern_ipc_perm *ipcp,
+					   short flag)
+{
+	return 0;
+}
+
+static inline int security_msg_msg_alloc (struct msg_msg * msg)
+{
+	return 0;
+}
+
+static inline void security_msg_msg_free (struct msg_msg * msg)
+{ }
+
+static inline int security_msg_queue_alloc (struct msg_queue *msq)
+{
+	return 0;
+}
+
+static inline void security_msg_queue_free (struct msg_queue *msq)
+{ }
+
+static inline int security_msg_queue_associate (struct msg_queue * msq, 
+						int msqflg)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgctl (struct msg_queue * msq, int cmd)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgsnd (struct msg_queue * msq,
+					     struct msg_msg * msg, int msqflg)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgrcv (struct msg_queue * msq,
+					     struct msg_msg * msg,
+					     struct task_struct * target,
+					     long type, int mode)
+{
+	return 0;
+}
+
+static inline int security_shm_alloc (struct shmid_kernel *shp)
+{
+	return 0;
+}
+
+static inline void security_shm_free (struct shmid_kernel *shp)
+{ }
+
+static inline int security_shm_associate (struct shmid_kernel * shp, 
+					  int shmflg)
+{
+	return 0;
+}
+
+static inline int security_shm_shmctl (struct shmid_kernel * shp, int cmd)
+{
+	return 0;
+}
+
+static inline int security_shm_shmat (struct shmid_kernel * shp, 
+				      char __user *shmaddr, int shmflg)
+{
+	return 0;
+}
+
+static inline int security_sem_alloc (struct sem_array *sma)
+{
+	return 0;
+}
+
+static inline void security_sem_free (struct sem_array *sma)
+{ }
+
+static inline int security_sem_associate (struct sem_array * sma, int semflg)
+{
+	return 0;
+}
+
+static inline int security_sem_semctl (struct sem_array * sma, int cmd)
+{
+	return 0;
+}
+
+static inline int security_sem_semop (struct sem_array * sma, 
+				      struct sembuf * sops, unsigned nsops, 
+				      int alter)
+{
+	return 0;
+}
+
+static inline void security_d_instantiate (struct dentry *dentry, struct inode *inode)
+{ }
+
+static inline int security_getprocattr(struct task_struct *p, char *name, void *value, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int security_netlink_send (struct sock *sk, struct sk_buff *skb)
+{
+	return cap_netlink_send (sk, skb);
+}
+
+static inline int security_netlink_recv (struct sk_buff *skb)
+{
+	return cap_netlink_recv (skb);
+}
+
+#endif	/* CONFIG_SECURITY */
+
+#ifdef CONFIG_SECURITY_NETWORK
+static inline int security_unix_stream_connect(struct socket * sock,
+					       struct socket * other, 
+					       struct sock * newsk)
+{
+	return security_ops->unix_stream_connect(sock, other, newsk);
+}
+
+
+static inline int security_unix_may_send(struct socket * sock, 
+					 struct socket * other)
+{
+	return security_ops->unix_may_send(sock, other);
+}
+
+static inline int security_socket_create (int family, int type,
+					  int protocol, int kern)
+{
+	return security_ops->socket_create(family, type, protocol, kern);
+}
+
+static inline void security_socket_post_create(struct socket * sock, 
+					       int family,
+					       int type, 
+					       int protocol, int kern)
+{
+	security_ops->socket_post_create(sock, family, type,
+					 protocol, kern);
+}
+
+static inline int security_socket_bind(struct socket * sock, 
+				       struct sockaddr * address, 
+				       int addrlen)
+{
+	return security_ops->socket_bind(sock, address, addrlen);
+}
+
+static inline int security_socket_connect(struct socket * sock, 
+					  struct sockaddr * address, 
+					  int addrlen)
+{
+	return security_ops->socket_connect(sock, address, addrlen);
+}
+
+static inline int security_socket_listen(struct socket * sock, int backlog)
+{
+	return security_ops->socket_listen(sock, backlog);
+}
+
+static inline int security_socket_accept(struct socket * sock, 
+					 struct socket * newsock)
+{
+	return security_ops->socket_accept(sock, newsock);
+}
+
+static inline void security_socket_post_accept(struct socket * sock, 
+					       struct socket * newsock)
+{
+	security_ops->socket_post_accept(sock, newsock);
+}
+
+static inline int security_socket_sendmsg(struct socket * sock, 
+					  struct msghdr * msg, int size)
+{
+	return security_ops->socket_sendmsg(sock, msg, size);
+}
+
+static inline int security_socket_recvmsg(struct socket * sock, 
+					  struct msghdr * msg, int size, 
+					  int flags)
+{
+	return security_ops->socket_recvmsg(sock, msg, size, flags);
+}
+
+static inline int security_socket_getsockname(struct socket * sock)
+{
+	return security_ops->socket_getsockname(sock);
+}
+
+static inline int security_socket_getpeername(struct socket * sock)
+{
+	return security_ops->socket_getpeername(sock);
+}
+
+static inline int security_socket_getsockopt(struct socket * sock, 
+					     int level, int optname)
+{
+	return security_ops->socket_getsockopt(sock, level, optname);
+}
+
+static inline int security_socket_setsockopt(struct socket * sock, 
+					     int level, int optname)
+{
+	return security_ops->socket_setsockopt(sock, level, optname);
+}
+
+static inline int security_socket_shutdown(struct socket * sock, int how)
+{
+	return security_ops->socket_shutdown(sock, how);
+}
+
+static inline int security_sock_rcv_skb (struct sock * sk, 
+					 struct sk_buff * skb)
+{
+	return security_ops->socket_sock_rcv_skb (sk, skb);
+}
+
+static inline int security_socket_getpeersec(struct socket *sock, char __user *optval,
+					     int __user *optlen, unsigned len)
+{
+	return security_ops->socket_getpeersec(sock, optval, optlen, len);
+}
+
+static inline int security_sk_alloc(struct sock *sk, int family, int priority)
+{
+	return security_ops->sk_alloc_security(sk, family, priority);
+}
+
+static inline void security_sk_free(struct sock *sk)
+{
+	return security_ops->sk_free_security(sk);
+}
+#else	/* CONFIG_SECURITY_NETWORK */
+static inline int security_unix_stream_connect(struct socket * sock,
+					       struct socket * other, 
+					       struct sock * newsk)
+{
+	return 0;
+}
+
+static inline int security_unix_may_send(struct socket * sock, 
+					 struct socket * other)
+{
+	return 0;
+}
+
+static inline int security_socket_create (int family, int type,
+					  int protocol, int kern)
+{
+	return 0;
+}
+
+static inline void security_socket_post_create(struct socket * sock, 
+					       int family,
+					       int type, 
+					       int protocol, int kern)
+{
+}
+
+static inline int security_socket_bind(struct socket * sock, 
+				       struct sockaddr * address, 
+				       int addrlen)
+{
+	return 0;
+}
+
+static inline int security_socket_connect(struct socket * sock, 
+					  struct sockaddr * address, 
+					  int addrlen)
+{
+	return 0;
+}
+
+static inline int security_socket_listen(struct socket * sock, int backlog)
+{
+	return 0;
+}
+
+static inline int security_socket_accept(struct socket * sock, 
+					 struct socket * newsock)
+{
+	return 0;
+}
+
+static inline void security_socket_post_accept(struct socket * sock, 
+					       struct socket * newsock)
+{
+}
+
+static inline int security_socket_sendmsg(struct socket * sock, 
+					  struct msghdr * msg, int size)
+{
+	return 0;
+}
+
+static inline int security_socket_recvmsg(struct socket * sock, 
+					  struct msghdr * msg, int size, 
+					  int flags)
+{
+	return 0;
+}
+
+static inline int security_socket_getsockname(struct socket * sock)
+{
+	return 0;
+}
+
+static inline int security_socket_getpeername(struct socket * sock)
+{
+	return 0;
+}
+
+static inline int security_socket_getsockopt(struct socket * sock, 
+					     int level, int optname)
+{
+	return 0;
+}
+
+static inline int security_socket_setsockopt(struct socket * sock, 
+					     int level, int optname)
+{
+	return 0;
+}
+
+static inline int security_socket_shutdown(struct socket * sock, int how)
+{
+	return 0;
+}
+static inline int security_sock_rcv_skb (struct sock * sk, 
+					 struct sk_buff * skb)
+{
+	return 0;
+}
+
+static inline int security_socket_getpeersec(struct socket *sock, char __user *optval,
+					     int __user *optlen, unsigned len)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline int security_sk_alloc(struct sock *sk, int family, int priority)
+{
+	return 0;
+}
+
+static inline void security_sk_free(struct sock *sk)
+{
+}
+#endif	/* CONFIG_SECURITY_NETWORK */
+
+#endif /* ! __LINUX_SECURITY_H */
+
diff --git a/include/linux/selection.h b/include/linux/selection.h
new file mode 100644
index 000000000000..ed3408b400f1
--- /dev/null
+++ b/include/linux/selection.h
@@ -0,0 +1,40 @@
+/*
+ * selection.h
+ *
+ * Interface between console.c, tty_io.c, vt.c, vc_screen.c and selection.c
+ */
+
+#ifndef _LINUX_SELECTION_H_
+#define _LINUX_SELECTION_H_
+
+#include <linux/tiocl.h>
+#include <linux/vt_buffer.h>
+
+extern struct vc_data *sel_cons;
+
+extern void clear_selection(void);
+extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
+extern int paste_selection(struct tty_struct *tty);
+extern int sel_loadlut(char __user *p);
+extern int mouse_reporting(void);
+extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
+
+extern int console_blanked;
+
+extern unsigned char color_table[];
+extern int default_red[];
+extern int default_grn[];
+extern int default_blu[];
+
+extern unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed);
+extern u16 screen_glyph(struct vc_data *vc, int offset);
+extern void complement_pos(struct vc_data *vc, int offset);
+extern void invert_screen(struct vc_data *vc, int offset, int count, int shift);
+
+extern void getconsxy(struct vc_data *vc, unsigned char *p);
+extern void putconsxy(struct vc_data *vc, unsigned char *p);
+
+extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
+extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+
+#endif
diff --git a/include/linux/selinux_netlink.h b/include/linux/selinux_netlink.h
new file mode 100644
index 000000000000..957e6ebca4e6
--- /dev/null
+++ b/include/linux/selinux_netlink.h
@@ -0,0 +1,37 @@
+/*
+ * Netlink event notifications for SELinux.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SELINUX_NETLINK_H
+#define _LINUX_SELINUX_NETLINK_H
+
+/* Message types. */
+#define SELNL_MSG_BASE 0x10
+enum {
+	SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
+	SELNL_MSG_POLICYLOAD,
+	SELNL_MSG_MAX
+};
+
+/* Multicast groups */
+#define SELNL_GRP_NONE		0x00000000
+#define SELNL_GRP_AVC		0x00000001	/* AVC notifications */
+#define SELNL_GRP_ALL		0xffffffff
+
+/* Message structures */
+struct selnl_msg_setenforce {
+	int32_t		val;
+};
+
+struct selnl_msg_policyload {
+	u_int32_t	seqno;
+};
+
+#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
new file mode 100644
index 000000000000..2d8516be9fd7
--- /dev/null
+++ b/include/linux/sem.h
@@ -0,0 +1,157 @@
+#ifndef _LINUX_SEM_H
+#define _LINUX_SEM_H
+
+#include <linux/ipc.h>
+#include <asm/atomic.h>
+
+/* semop flags */
+#define SEM_UNDO        0x1000  /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID  11       /* get sempid */
+#define GETVAL  12       /* get semval */
+#define GETALL  13       /* get all semval's */
+#define GETNCNT 14       /* get semncnt */
+#define GETZCNT 15       /* get semzcnt */
+#define SETVAL  16       /* set semval */
+#define SETALL  17       /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	struct sem	*sem_base;		/* ptr to first semaphore in array */
+	struct sem_queue *sem_pending;		/* pending operations to be processed */
+	struct sem_queue **sem_pending_last;	/* last pending operation */
+	struct sem_undo	*undo;			/* undo requests on this array */
+	unsigned short	sem_nsems;		/* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+	unsigned short  sem_num;	/* semaphore index in array */
+	short		sem_op;		/* semaphore operation */
+	short		sem_flg;	/* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+	int val;			/* value for SETVAL */
+	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
+	unsigned short __user *array;	/* array for GETALL & SETALL */
+	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
+	void __user *__pad;
+};
+
+struct  seminfo {
+	int semmap;
+	int semmni;
+	int semmns;
+	int semmnu;
+	int semmsl;
+	int semopm;
+	int semume;
+	int semusz;
+	int semvmx;
+	int semaem;
+};
+
+#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
+#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
+#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
+#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
+#define SEMAEM  SEMVMX          /* adjust on exit max value */
+
+/* unused */
+#define SEMUME  SEMOPM          /* max num of undo entries per process */
+#define SEMMNU  SEMMNS          /* num of undo structures system wide */
+#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
+#define SEMUSZ  20		/* sizeof struct sem_undo */
+
+#ifdef __KERNEL__
+
+/* One semaphore structure for each semaphore in the system. */
+struct sem {
+	int	semval;		/* current value */
+	int	sempid;		/* pid of last operation */
+};
+
+/* One sem_array data structure for each set of semaphores in the system. */
+struct sem_array {
+	struct kern_ipc_perm	sem_perm;	/* permissions .. see ipc.h */
+	time_t			sem_otime;	/* last semop time */
+	time_t			sem_ctime;	/* last change time */
+	struct sem		*sem_base;	/* ptr to first semaphore in array */
+	struct sem_queue	*sem_pending;	/* pending operations to be processed */
+	struct sem_queue	**sem_pending_last; /* last pending operation */
+	struct sem_undo		*undo;		/* undo requests on this array */
+	unsigned long		sem_nsems;	/* no. of semaphores in array */
+};
+
+/* One queue for each sleeping process in the system. */
+struct sem_queue {
+	struct sem_queue *	next;	 /* next entry in the queue */
+	struct sem_queue **	prev;	 /* previous entry in the queue, *(q->prev) == q */
+	struct task_struct*	sleeper; /* this process */
+	struct sem_undo *	undo;	 /* undo structure */
+	int    			pid;	 /* process id of requesting process */
+	int    			status;	 /* completion status of operation */
+	struct sem_array *	sma;	 /* semaphore array for operations */
+	int			id;	 /* internal sem id */
+	struct sembuf *		sops;	 /* array of pending operations */
+	int			nsops;	 /* number of operations */
+	int			alter;   /* does the operation alter the array? */
+};
+
+/* Each task has a list of undo requests. They are executed automatically
+ * when the process exits.
+ */
+struct sem_undo {
+	struct sem_undo *	proc_next;	/* next entry on this process */
+	struct sem_undo *	id_next;	/* next entry on this semaphore set */
+	int			semid;		/* semaphore set identifier */
+	short *			semadj;		/* array of adjustments, one per semaphore */
+};
+
+/* sem_undo_list controls shared access to the list of sem_undo structures
+ * that may be shared among all a CLONE_SYSVSEM task group.
+ */ 
+struct sem_undo_list {
+	atomic_t	refcnt;
+	spinlock_t	lock;
+	struct sem_undo	*proc_list;
+};
+
+struct sysv_sem {
+	struct sem_undo_list *undo_list;
+};
+
+#ifdef CONFIG_SYSVIPC
+
+extern int copy_semundo(unsigned long clone_flags, struct task_struct *tsk);
+extern void exit_sem(struct task_struct *tsk);
+
+#else
+static inline int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
+{
+	return 0;
+}
+
+static inline void exit_sem(struct task_struct *tsk)
+{
+	return;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SEM_H */
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
new file mode 100644
index 000000000000..850a974ee505
--- /dev/null
+++ b/include/linux/seq_file.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_SEQ_FILE_H
+#define _LINUX_SEQ_FILE_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/semaphore.h>
+
+struct seq_operations;
+struct file;
+struct vfsmount;
+struct dentry;
+struct inode;
+
+struct seq_file {
+	char *buf;
+	size_t size;
+	size_t from;
+	size_t count;
+	loff_t index;
+	loff_t version;
+	struct semaphore sem;
+	struct seq_operations *op;
+	void *private;
+};
+
+struct seq_operations {
+	void * (*start) (struct seq_file *m, loff_t *pos);
+	void (*stop) (struct seq_file *m, void *v);
+	void * (*next) (struct seq_file *m, void *v, loff_t *pos);
+	int (*show) (struct seq_file *m, void *v);
+};
+
+int seq_open(struct file *, struct seq_operations *);
+ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
+loff_t seq_lseek(struct file *, loff_t, int);
+int seq_release(struct inode *, struct file *);
+int seq_escape(struct seq_file *, const char *, const char *);
+int seq_putc(struct seq_file *m, char c);
+int seq_puts(struct seq_file *m, const char *s);
+
+int seq_printf(struct seq_file *, const char *, ...)
+	__attribute__ ((format (printf,2,3)));
+
+int seq_path(struct seq_file *, struct vfsmount *, struct dentry *, char *);
+
+int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
+int single_release(struct inode *, struct file *);
+int seq_release_private(struct inode *, struct file *);
+
+#define SEQ_START_TOKEN ((void *)1)
+
+#endif
+#endif
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
new file mode 100644
index 000000000000..fca9b0fb5b4e
--- /dev/null
+++ b/include/linux/seqlock.h
@@ -0,0 +1,175 @@
+#ifndef __LINUX_SEQLOCK_H
+#define __LINUX_SEQLOCK_H
+/*
+ * Reader/writer consistent mechanism without starving writers. This type of
+ * lock for data where the reader wants a consitent set of information
+ * and is willing to retry if the information changes.  Readers never
+ * block but they may have to retry if a writer is in
+ * progress. Writers do not wait for readers. 
+ *
+ * This is not as cache friendly as brlock. Also, this will not work
+ * for data that contains pointers, because any writer could
+ * invalidate a pointer that a reader was following.
+ *
+ * Expected reader usage:
+ * 	do {
+ *	    seq = read_seqbegin(&foo);
+ * 	...
+ *      } while (read_seqretry(&foo, seq));
+ *
+ *
+ * On non-SMP the spin locks disappear but the writer still needs
+ * to increment the sequence variables because an interrupt routine could
+ * change the state of the data.
+ *
+ * Based on x86_64 vsyscall gettimeofday 
+ * by Keith Owens and Andrea Arcangeli
+ */
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+
+typedef struct {
+	unsigned sequence;
+	spinlock_t lock;
+} seqlock_t;
+
+/*
+ * These macros triggered gcc-3.x compile-time problems.  We think these are
+ * OK now.  Be cautious.
+ */
+#define SEQLOCK_UNLOCKED { 0, SPIN_LOCK_UNLOCKED }
+#define seqlock_init(x)	do { *(x) = (seqlock_t) SEQLOCK_UNLOCKED; } while (0)
+
+
+/* Lock out other writers and update the count.
+ * Acts like a normal spin_lock/unlock.
+ * Don't need preempt_disable() because that is in the spin_lock already.
+ */
+static inline void write_seqlock(seqlock_t *sl)
+{
+	spin_lock(&sl->lock);
+	++sl->sequence;
+	smp_wmb();			
+}	
+
+static inline void write_sequnlock(seqlock_t *sl) 
+{
+	smp_wmb();
+	sl->sequence++;
+	spin_unlock(&sl->lock);
+}
+
+static inline int write_tryseqlock(seqlock_t *sl)
+{
+	int ret = spin_trylock(&sl->lock);
+
+	if (ret) {
+		++sl->sequence;
+		smp_wmb();			
+	}
+	return ret;
+}
+
+/* Start of read calculation -- fetch last complete writer token */
+static inline unsigned read_seqbegin(const seqlock_t *sl)
+{
+	unsigned ret = sl->sequence;
+	smp_rmb();
+	return ret;
+}
+
+/* Test if reader processed invalid data.
+ * If initial values is odd, 
+ *	then writer had already started when section was entered
+ * If sequence value changed
+ *	then writer changed data while in section
+ *    
+ * Using xor saves one conditional branch.
+ */
+static inline int read_seqretry(const seqlock_t *sl, unsigned iv)
+{
+	smp_rmb();
+	return (iv & 1) | (sl->sequence ^ iv);
+}
+
+
+/*
+ * Version using sequence counter only.
+ * This can be used when code has its own mutex protecting the
+ * updating starting before the write_seqcountbeqin() and ending
+ * after the write_seqcount_end().
+ */
+
+typedef struct seqcount {
+	unsigned sequence;
+} seqcount_t;
+
+#define SEQCNT_ZERO { 0 }
+#define seqcount_init(x)	do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0)
+
+/* Start of read using pointer to a sequence counter only.  */
+static inline unsigned read_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret = s->sequence;
+	smp_rmb();
+	return ret;
+}
+
+/* Test if reader processed invalid data.
+ * Equivalent to: iv is odd or sequence number has changed.
+ *                (iv & 1) || (*s != iv)
+ * Using xor saves one conditional branch.
+ */
+static inline int read_seqcount_retry(const seqcount_t *s, unsigned iv)
+{
+	smp_rmb();
+	return (iv & 1) | (s->sequence ^ iv);
+}
+
+
+/*
+ * Sequence counter only version assumes that callers are using their
+ * own mutexing.
+ */
+static inline void write_seqcount_begin(seqcount_t *s)
+{
+	s->sequence++;
+	smp_wmb();
+}
+
+static inline void write_seqcount_end(seqcount_t *s)
+{
+	smp_wmb();
+	s->sequence++;
+}
+
+/*
+ * Possible sw/hw IRQ protected versions of the interfaces.
+ */
+#define write_seqlock_irqsave(lock, flags)				\
+	do { local_irq_save(flags); write_seqlock(lock); } while (0)
+#define write_seqlock_irq(lock)						\
+	do { local_irq_disable();   write_seqlock(lock); } while (0)
+#define write_seqlock_bh(lock)						\
+        do { local_bh_disable();    write_seqlock(lock); } while (0)
+
+#define write_sequnlock_irqrestore(lock, flags)				\
+	do { write_sequnlock(lock); local_irq_restore(flags); } while(0)
+#define write_sequnlock_irq(lock)					\
+	do { write_sequnlock(lock); local_irq_enable(); } while(0)
+#define write_sequnlock_bh(lock)					\
+	do { write_sequnlock(lock); local_bh_enable(); } while(0)
+
+#define read_seqbegin_irqsave(lock, flags)				\
+	({ local_irq_save(flags);   read_seqbegin(lock); })
+
+#define read_seqretry_irqrestore(lock, iv, flags)			\
+	({								\
+		int ret = read_seqretry(lock, iv);			\
+		local_irq_restore(flags);				\
+		ret;							\
+	})
+
+#endif /* __LINUX_SEQLOCK_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
new file mode 100644
index 000000000000..00145822fb74
--- /dev/null
+++ b/include/linux/serial.h
@@ -0,0 +1,188 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIAL_H
+#define _LINUX_SERIAL_H
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+
+struct async_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+};
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#define SERIAL_XMIT_SIZE PAGE_SIZE
+
+#endif
+
+struct serial_struct {
+	int	type;
+	int	line;
+	unsigned int	port;
+	int	irq;
+	int	flags;
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	baud_base;
+	unsigned short	close_delay;
+	char	io_type;
+	char	reserved_char[1];
+	int	hub6;
+	unsigned short	closing_wait; /* time to wait before closing */
+	unsigned short	closing_wait2; /* no longer used... */
+	unsigned char	*iomem_base;
+	unsigned short	iomem_reg_shift;
+	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output.  65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF	0
+#define ASYNC_CLOSING_WAIT_NONE	65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS     5	/* usurped by cyclades.c */
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9	/* usurped by cyclades.c */
+#define PORT_16C950	10	/* Oxford Semiconductor */
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13	/* RSA-DV II/S card */
+#define PORT_MAX	13
+
+#define SERIAL_IO_PORT	0
+#define SERIAL_IO_HUB6	1
+#define SERIAL_IO_MEM	2
+
+struct serial_uart_config {
+	char	*name;
+	int	dfl_xmit_fifo_size;
+	int	flags;
+};
+
+#define UART_CLEAR_FIFO		0x01
+#define UART_USE_FIFO		0x02
+#define UART_STARTECH		0x04
+#define UART_NATSEMI		0x08
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field
+ */
+#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
+				   on the callout port */
+#define ASYNC_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNC_SAK	0x0004	/* Secure Attention Key (Orange book) */
+#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
+
+#define ASYNC_SPD_MASK	0x1030
+#define ASYNC_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
+
+#define ASYNC_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
+#define ASYNC_SPD_CUST	0x0030  /* Use user-specified divisor */
+
+#define ASYNC_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
+#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
+#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
+#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
+#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
+
+#define ASYNC_HARDPPS_CD	0x0800	/* Call hardpps when CD goes high  */
+
+#define ASYNC_SPD_SHI	0x1000	/* Use 230400 instead of 38400 bps */
+#define ASYNC_SPD_WARP	0x1010	/* Use 460800 instead of 38400 bps */
+
+#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
+
+#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
+				  * checks.  Note: can be dangerous! */
+
+#define ASYNC_AUTOPROBE	 0x8000 /* Port was autoprobed by PCI or PNP code */
+
+#define ASYNC_FLAGS	0x7FFF	/* Possible legal async flags */
+#define ASYNC_USR_MASK	0x3430	/* Legal flags that non-privileged
+				 * users can set or reset */
+
+/* Internal flags used only by kernel/chr_drv/serial.c */
+#define ASYNC_INITIALIZED	0x80000000 /* Serial port was initialized */
+#define ASYNC_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
+#define ASYNC_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
+#define ASYNC_CLOSING		0x08000000 /* Serial port is closing */
+#define ASYNC_CTS_FLOW		0x04000000 /* Do CTS flow control */
+#define ASYNC_CHECK_CD		0x02000000 /* i.e., CLOCAL */
+#define ASYNC_SHARE_IRQ		0x01000000 /* for multifunction cards
+					     --- no longer used */
+#define ASYNC_CONS_FLOW		0x00800000 /* flow control for console  */
+
+#define ASYNC_BOOT_ONLYMCA	0x00400000 /* Probe only if MCA bus */
+#define ASYNC_INTERNAL_FLAGS	0xFFC00000 /* Internal flags */
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+	int		irq;
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+	int	reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+	int cts, dsr, rng, dcd;
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
+};
+
+
+#ifdef __KERNEL__
+/* Export to allow PCMCIA to use this - Dave Hinds */
+extern int register_serial(struct serial_struct *req);
+extern void unregister_serial(int line);
+
+/* Allow architectures to override entries in serial8250_ports[] at run time: */
+struct uart_port;	/* forward declaration */
+extern int early_serial_setup(struct uart_port *port);
+extern int early_serial_console_init(char *options);
+extern int serial8250_start_console(struct uart_port *port, char *options);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
new file mode 100644
index 000000000000..71b6df2516a6
--- /dev/null
+++ b/include/linux/serial167.h
@@ -0,0 +1,171 @@
+/*
+ * serial167.h
+ *
+ * Richard Hirst [richard@sleepie.demon.co.uk]
+ *
+ * Based on cyclades.h
+ */
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+	int                     magic;
+	int                     type;
+	int			card;
+	int			line;
+	int			flags; 		/* defined in tty.h */
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			timeout;
+	int			xmit_fifo_size;
+	int                     cor1,cor2,cor3,cor4,cor5,cor6,cor7;
+	int                     tbpr,tco,rbpr,rco;
+	int			ignore_status_mask;
+	int			close_delay;
+	int			IER; 	/* Interrupt Enable Register */
+	unsigned long		event;
+	unsigned long		last_active;
+	int			count;	/* # of fd on device */
+	int                     x_char; /* to be pushed out ASAP */
+	int                     x_break;
+	int			blocked_open; /* # of blocked opens */
+	unsigned char 		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+        int                     default_threshold;
+        int                     default_timeout;
+	struct work_struct	tqueue;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+        struct cyclades_monitor mon;
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at cy interrupt time.
+ */
+#define Cy_EVENT_READ_PROCESS	0
+#define Cy_EVENT_WRITE_WAKEUP	1
+#define Cy_EVENT_HANGUP		2
+#define Cy_EVENT_BREAK		3
+#define Cy_EVENT_OPEN_WAKEUP	4
+
+
+
+#define CyMaxChipsPerCard 1
+
+/**** cd2401 registers ****/
+
+#define CyGFRCR         (0x81)
+#define CyCCR		(0x13)
+#define      CyCLR_CHAN		(0x40)
+#define      CyINIT_CHAN	(0x20)
+#define      CyCHIP_RESET	(0x10)
+#define      CyENB_XMTR		(0x08)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_RCVR		(0x01)
+#define CyCAR		(0xee)
+#define CyIER		(0x11)
+#define      CyMdmCh		(0x80)
+#define      CyRxExc		(0x20)
+#define      CyRxData		(0x08)
+#define      CyTxMpty		(0x02)
+#define      CyTxRdy		(0x01)
+#define CyLICR		(0x26)
+#define CyRISR		(0x89)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyOVERRUN		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyBREAK		(0x01)
+#define CyREOIR		(0x84)
+#define CyTEOIR		(0x85)
+#define CyMEOIR		(0x86)
+#define      CyNOTRANS		(0x08)
+#define CyRFOC		(0x30)
+#define CyRDR		(0xf8)
+#define CyTDR		(0xf8)
+#define CyMISR		(0x8b)
+#define CyRISR		(0x89)
+#define CyTISR		(0x8a)
+#define CyMSVR1		(0xde)
+#define CyMSVR2		(0xdf)
+#define      CyDSR		(0x80)
+#define      CyDCD		(0x40)
+#define      CyCTS		(0x20)
+#define      CyDTR		(0x02)
+#define      CyRTS		(0x01)
+#define CyRTPRL		(0x25)
+#define CyRTPRH		(0x24)
+#define CyCOR1		(0x10)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_5_BITS		(0x04)
+#define      Cy_6_BITS		(0x05)
+#define      Cy_7_BITS		(0x06)
+#define      Cy_8_BITS		(0x07)
+#define CyCOR2		(0x17)
+#define      CyETC		(0x20)
+#define      CyCtsAE		(0x02)
+#define CyCOR3		(0x16)
+#define      Cy_1_STOP		(0x02)
+#define      Cy_2_STOP		(0x04)
+#define CyCOR4		(0x15)
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR5		(0x14)
+#define CyCOR6		(0x18)
+#define CyCOR7		(0x07)
+#define CyRBPR		(0xcb)
+#define CyRCOR		(0xc8)
+#define CyTBPR		(0xc3)
+#define CyTCOR		(0xc0)
+#define CySCHR1		(0x1f)
+#define CySCHR2 	(0x1e)
+#define CyTPR		(0xda)
+#define CyPILR1		(0xe3)
+#define CyPILR2		(0xe0)
+#define CyPILR3		(0xe1)
+#define CyCMR		(0x1b)
+#define      CyASYNC		(0x02)
+#define CyLICR          (0x26)
+#define CyLIVR          (0x09)
+#define CySCRL		(0x23)
+#define CySCRH		(0x22)
+#define CyTFTC		(0x80)
+
+
+/* max number of chars in the FIFO */
+
+#define CyMAX_CHAR_FIFO	12
+
+/***************************************************************************/
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
new file mode 100644
index 000000000000..2307f11d8a6b
--- /dev/null
+++ b/include/linux/serialP.h
@@ -0,0 +1,184 @@
+/*
+ * Private header file for the (dumb) serial driver
+ *
+ * Copyright (C) 1997 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIALP_H
+#define _LINUX_SERIALP_H
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/wait.h>
+
+struct serial_state {
+	int	magic;
+	int	baud_base;
+	unsigned long	port;
+	int	irq;
+	int	flags;
+	int	hub6;
+	int	type;
+	int	line;
+	int	revision;	/* Chip revision (950) */
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	count;
+	u8	*iomem_base;
+	u16	iomem_reg_shift;
+	unsigned short	close_delay;
+	unsigned short	closing_wait; /* time to wait before closing */
+	struct async_icount	icount;	
+	int	io_type;
+	struct async_struct *info;
+	struct pci_dev	*dev;
+};
+
+struct async_struct {
+	int			magic;
+	unsigned long		port;
+	int			hub6;
+	int			flags;
+	int			xmit_fifo_size;
+	struct serial_state	*state;
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			quot;
+	int			x_char;	/* xon/xoff character */
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned short		closing_wait2; /* obsolete */
+	int			IER; 	/* Interrupt Enable Register */
+	int			MCR; 	/* Modem control register */
+	int			LCR; 	/* Line control register */
+	int			ACR;	 /* 16950 Additional Control Reg. */
+	unsigned long		event;
+	unsigned long		last_active;
+	int			line;
+	int			blocked_open; /* # of blocked opens */
+ 	struct circ_buf		xmit;
+ 	spinlock_t		xmit_lock;
+	u8			*iomem_base;
+	u16			iomem_reg_shift;
+	int			io_type;
+	struct work_struct			work;
+	struct tasklet_struct	tlet;
+#ifdef DECLARE_WAITQUEUE
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	wait_queue_head_t	delta_msr_wait;
+#else	
+	struct wait_queue	*open_wait;
+	struct wait_queue	*close_wait;
+	struct wait_queue	*delta_msr_wait;
+#endif	
+	struct async_struct	*next_port; /* For the linked list */
+	struct async_struct	*prev_port;
+};
+
+#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))
+
+#define SERIAL_MAGIC 0x5301
+#define SSTATE_MAGIC 0x5302
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP	0
+
+/*
+ * Multiport serial configuration structure --- internal structure
+ */
+struct rs_multiport_struct {
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+};
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's.  The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ *
+ * This is still used by arch/mips/au1000/common/serial.c for some weird
+ * reason (mips != alpha!)
+ */
+#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif
+
+/*
+ * Definitions for PCI support.
+ */
+#define SPCI_FL_BASE_MASK	0x0007
+#define SPCI_FL_BASE0	0x0000
+#define SPCI_FL_BASE1	0x0001
+#define SPCI_FL_BASE2	0x0002
+#define SPCI_FL_BASE3	0x0003
+#define SPCI_FL_BASE4	0x0004
+#define SPCI_FL_GET_BASE(x)	(x & SPCI_FL_BASE_MASK)
+
+#define SPCI_FL_IRQ_MASK       (0x0007 << 4)
+#define SPCI_FL_IRQBASE0       (0x0000 << 4)
+#define SPCI_FL_IRQBASE1       (0x0001 << 4)
+#define SPCI_FL_IRQBASE2       (0x0002 << 4)
+#define SPCI_FL_IRQBASE3       (0x0003 << 4)
+#define SPCI_FL_IRQBASE4       (0x0004 << 4)
+#define SPCI_FL_GET_IRQBASE(x)        ((x & SPCI_FL_IRQ_MASK) >> 4)
+
+/* Use successive BARs (PCI base address registers), 
+   else use offset into some specified BAR */
+#define SPCI_FL_BASE_TABLE	0x0100
+
+/* Use successive entries in the irq resource table */
+#define SPCI_FL_IRQ_TABLE	0x0200
+
+/* Use the irq resource table instead of dev->irq */
+#define SPCI_FL_IRQRESOURCE	0x0400
+
+/* Use the Base address register size to cap number of ports */
+#define SPCI_FL_REGION_SZ_CAP	0x0800
+
+/* Do not use irq sharing for this device */
+#define SPCI_FL_NO_SHIRQ	0x1000
+
+/* This is a PNP device */
+#define SPCI_FL_ISPNP		0x2000
+
+#define SPCI_FL_PNPDEFAULT	(SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
+
+#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
new file mode 100644
index 000000000000..823181af6ddf
--- /dev/null
+++ b/include/linux/serial_8250.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/linux/serial_8250.h
+ *
+ *  Copyright (C) 2004 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _LINUX_SERIAL_8250_H
+#define _LINUX_SERIAL_8250_H
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+struct plat_serial8250_port {
+	unsigned long	iobase;		/* io base address */
+	void __iomem	*membase;	/* ioremap cookie or NULL */
+	unsigned long	mapbase;	/* resource base */
+	unsigned int	irq;		/* interrupt number */
+	unsigned int	uartclk;	/* UART clock rate */
+	unsigned char	regshift;	/* register shift */
+	unsigned char	iotype;		/* UPIO_* */
+	unsigned int	flags;		/* UPF_* flags */
+};
+
+#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
new file mode 100644
index 000000000000..c3fb5984f250
--- /dev/null
+++ b/include/linux/serial_core.h
@@ -0,0 +1,491 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef LINUX_SERIAL_CORE_H
+#define LINUX_SERIAL_CORE_H
+
+/*
+ * The type definitions.  These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS	5
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9
+#define PORT_16C950	10
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13
+#define PORT_NS16550A	14
+#define PORT_XSCALE	15
+#define PORT_MAX_8250	15	/* max port ID */
+
+/*
+ * ARM specific type numbers.  These are not currently guaranteed
+ * to be implemented, and will change in the future.  These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA	31
+#define PORT_AMBA	32
+#define PORT_CLPS711X	33
+#define PORT_SA1100	34
+#define PORT_UART00	35
+#define PORT_21285	37
+
+/* Sparc type numbers.  */
+#define PORT_SUNZILOG	38
+#define PORT_SUNSAB	39
+
+/* NEC v850.  */
+#define PORT_V850E_UART	40
+
+/* DZ */
+#define PORT_DZ		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG	51
+
+/* SH-SCI */
+#define PORT_SCI	52
+#define PORT_SCIF	53
+#define PORT_IRDA	54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410    55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG	56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
+/* PPC CPM type number */
+#define PORT_CPM        58
+
+/* MPC52xx type numbers */
+#define PORT_MPC52xx	59
+
+/* IBM icom */
+#define PORT_ICOM	60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440	61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX	62
+
+/* Marvell MPSC */
+#define PORT_MPSC	63
+
+/* TXX9 type number */
+#define PORT_TXX9       64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU		65
+#define PORT_VR41XX_DSIU	66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400	67
+
+/* M32R SIO */
+#define PORT_M32R_SIO	68
+
+/*Digi jsm */
+#define PORT_JSM        65
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+
+struct uart_port;
+struct uart_info;
+struct serial_struct;
+struct device;
+
+/*
+ * This structure describes all the operations that can be
+ * done on the physical hardware.
+ */
+struct uart_ops {
+	unsigned int	(*tx_empty)(struct uart_port *);
+	void		(*set_mctrl)(struct uart_port *, unsigned int mctrl);
+	unsigned int	(*get_mctrl)(struct uart_port *);
+	void		(*stop_tx)(struct uart_port *, unsigned int tty_stop);
+	void		(*start_tx)(struct uart_port *, unsigned int tty_start);
+	void		(*send_xchar)(struct uart_port *, char ch);
+	void		(*stop_rx)(struct uart_port *);
+	void		(*enable_ms)(struct uart_port *);
+	void		(*break_ctl)(struct uart_port *, int ctl);
+	int		(*startup)(struct uart_port *);
+	void		(*shutdown)(struct uart_port *);
+	void		(*set_termios)(struct uart_port *, struct termios *new,
+				       struct termios *old);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned int oldstate);
+	int		(*set_wake)(struct uart_port *, unsigned int state);
+
+	/*
+	 * Return a string describing the type of the port
+	 */
+	const char *(*type)(struct uart_port *);
+
+	/*
+	 * Release IO and memory resources used by the port.
+	 * This includes iounmap if necessary.
+	 */
+	void		(*release_port)(struct uart_port *);
+
+	/*
+	 * Request IO and memory resources used by the port.
+	 * This includes iomapping the port if necessary.
+	 */
+	int		(*request_port)(struct uart_port *);
+	void		(*config_port)(struct uart_port *, int);
+	int		(*verify_port)(struct uart_port *, struct serial_struct *);
+	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
+};
+
+#define UART_CONFIG_TYPE	(1 << 0)
+#define UART_CONFIG_IRQ		(1 << 1)
+
+struct uart_icount {
+	__u32	cts;
+	__u32	dsr;
+	__u32	rng;
+	__u32	dcd;
+	__u32	rx;
+	__u32	tx;
+	__u32	frame;
+	__u32	overrun;
+	__u32	parity;
+	__u32	brk;
+	__u32	buf_overrun;
+};
+
+struct uart_port {
+	spinlock_t		lock;			/* port lock */
+	unsigned int		iobase;			/* in/out[bwl] */
+	unsigned char __iomem	*membase;		/* read/write[bwl] */
+	unsigned int		irq;			/* irq number */
+	unsigned int		uartclk;		/* base uart clock */
+	unsigned char		fifosize;		/* tx fifo size */
+	unsigned char		x_char;			/* xon/xoff char */
+	unsigned char		regshift;		/* reg offset shift */
+	unsigned char		iotype;			/* io access style */
+
+#define UPIO_PORT		(0)
+#define UPIO_HUB6		(1)
+#define UPIO_MEM		(2)
+#define UPIO_MEM32		(3)
+
+	unsigned int		read_status_mask;	/* driver specific */
+	unsigned int		ignore_status_mask;	/* driver specific */
+	struct uart_info	*info;			/* pointer to parent info */
+	struct uart_icount	icount;			/* statistics */
+
+	struct console		*cons;			/* struct console, if any */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+	unsigned long		sysrq;			/* sysrq timeout */
+#endif
+
+	unsigned int		flags;
+
+#define UPF_FOURPORT		(1 << 1)
+#define UPF_SAK			(1 << 2)
+#define UPF_SPD_MASK		(0x1030)
+#define UPF_SPD_HI		(0x0010)
+#define UPF_SPD_VHI		(0x0020)
+#define UPF_SPD_CUST		(0x0030)
+#define UPF_SPD_SHI		(0x1000)
+#define UPF_SPD_WARP		(0x1010)
+#define UPF_SKIP_TEST		(1 << 6)
+#define UPF_AUTO_IRQ		(1 << 7)
+#define UPF_HARDPPS_CD		(1 << 11)
+#define UPF_LOW_LATENCY		(1 << 13)
+#define UPF_BUGGY_UART		(1 << 14)
+#define UPF_AUTOPROBE		(1 << 15)
+#define UPF_MAGIC_MULTIPLIER	(1 << 16)
+#define UPF_BOOT_ONLYMCA	(1 << 22)
+#define UPF_CONS_FLOW		(1 << 23)
+#define UPF_SHARE_IRQ		(1 << 24)
+#define UPF_BOOT_AUTOCONF	(1 << 28)
+#define UPF_IOREMAP		(1 << 31)
+
+#define UPF_CHANGE_MASK		(0x17fff)
+#define UPF_USR_MASK		(UPF_SPD_MASK|UPF_LOW_LATENCY)
+
+	unsigned int		mctrl;			/* current modem ctrl settings */
+	unsigned int		timeout;		/* character-based timeout */
+	unsigned int		type;			/* port type */
+	struct uart_ops		*ops;
+	unsigned int		custom_divisor;
+	unsigned int		line;			/* port index */
+	unsigned long		mapbase;		/* for ioremap */
+	struct device		*dev;			/* parent device */
+	unsigned char		hub6;			/* this should be in the 8250 driver */
+	unsigned char		unused[3];
+};
+
+/*
+ * This is the state information which is persistent across opens.
+ * The low level driver must not to touch any elements contained
+ * within.
+ */
+struct uart_state {
+	unsigned int		close_delay;		/* msec */
+	unsigned int		closing_wait;		/* msec */
+
+#define USF_CLOSING_WAIT_INF	(0)
+#define USF_CLOSING_WAIT_NONE	(~0U)
+
+	int			count;
+	int			pm_state;
+	struct uart_info	*info;
+	struct uart_port	*port;
+
+	struct semaphore	sem;
+};
+
+#define UART_XMIT_SIZE	PAGE_SIZE
+/*
+ * This is the state information which is only valid when the port
+ * is open; it may be freed by the core driver once the device has
+ * been closed.  Either the low level driver or the core can modify
+ * stuff here.
+ */
+struct uart_info {
+	struct tty_struct	*tty;
+	struct circ_buf		xmit;
+	unsigned int		flags;
+
+/*
+ * These are the flags that specific to info->flags, and reflect our
+ * internal state.  They can not be accessed via port->flags.  Low
+ * level drivers must not change these, but may query them instead.
+ */
+#define UIF_CHECK_CD		(1 << 25)
+#define UIF_CTS_FLOW		(1 << 26)
+#define UIF_NORMAL_ACTIVE	(1 << 29)
+#define UIF_INITIALIZED		(1 << 31)
+
+	int			blocked_open;
+
+	struct tasklet_struct	tlet;
+
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	delta_msr_wait;
+};
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS		256
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+	struct module		*owner;
+	const char		*driver_name;
+	const char		*dev_name;
+	const char		*devfs_name;
+	int			 major;
+	int			 minor;
+	int			 nr;
+	struct console		*cons;
+
+	/*
+	 * these are private; the low level driver should not
+	 * touch these; they should be initialised to NULL
+	 */
+	struct uart_state	*state;
+	struct tty_driver	*tty_driver;
+};
+
+void uart_write_wakeup(struct uart_port *port);
+
+/*
+ * Baud rate helpers.
+ */
+void uart_update_timeout(struct uart_port *port, unsigned int cflag,
+			 unsigned int baud);
+unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios,
+				struct termios *old, unsigned int min,
+				unsigned int max);
+unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
+
+/*
+ * Console helpers.
+ */
+struct uart_port *uart_get_console(struct uart_port *ports, int nr,
+				   struct console *c);
+void uart_parse_options(char *options, int *baud, int *parity, int *bits,
+			int *flow);
+int uart_set_options(struct uart_port *port, struct console *co, int baud,
+		     int parity, int bits, int flow);
+struct tty_driver *uart_console_device(struct console *co, int *index);
+
+/*
+ * Port/driver registration/removal
+ */
+int uart_register_driver(struct uart_driver *uart);
+void uart_unregister_driver(struct uart_driver *uart);
+void uart_unregister_port(struct uart_driver *reg, int line);
+int uart_register_port(struct uart_driver *reg, struct uart_port *port);
+int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_match_port(struct uart_port *port1, struct uart_port *port2);
+
+/*
+ * Power Management
+ */
+int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
+int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
+
+#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ)	\
+	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ)	\
+	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_tx_stopped(port)		\
+	((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+
+/*
+ * The following are helper functions for the low level drivers.
+ */
+#ifdef SUPPORT_SYSRQ
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch,
+		       struct pt_regs *regs)
+{
+	if (port->sysrq) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			handle_sysrq(ch, regs, NULL);
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+#else
+#define uart_handle_sysrq_char(port,ch,regs)	(0)
+#endif
+
+/*
+ * We do the SysRQ and SAK checking like this...
+ */
+static inline int uart_handle_break(struct uart_port *port)
+{
+	struct uart_info *info = port->info;
+#ifdef SUPPORT_SYSRQ
+	if (port->cons && port->cons->index == port->line) {
+		if (!port->sysrq) {
+			port->sysrq = jiffies + HZ*5;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+#endif
+	if (info->flags & UPF_SAK)
+		do_SAK(info->tty);
+	return 0;
+}
+
+/**
+ *	uart_handle_dcd_change - handle a change of carrier detect state
+ *	@port: uart_port structure for the open port
+ *	@status: new carrier detect status, nonzero if active
+ */
+static inline void
+uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+{
+	struct uart_info *info = port->info;
+
+	port->icount.dcd++;
+
+#ifdef CONFIG_HARD_PPS
+	if ((port->flags & UPF_HARDPPS_CD) && status)
+		hardpps();
+#endif
+
+	if (info->flags & UIF_CHECK_CD) {
+		if (status)
+			wake_up_interruptible(&info->open_wait);
+		else if (info->tty)
+			tty_hangup(info->tty);
+	}
+}
+
+/**
+ *	uart_handle_cts_change - handle a change of clear-to-send state
+ *	@port: uart_port structure for the open port
+ *	@status: new clear to send status, nonzero if active
+ */
+static inline void
+uart_handle_cts_change(struct uart_port *port, unsigned int status)
+{
+	struct uart_info *info = port->info;
+	struct tty_struct *tty = info->tty;
+
+	port->icount.cts++;
+
+	if (info->flags & UIF_CTS_FLOW) {
+		if (tty->hw_stopped) {
+			if (status) {
+				tty->hw_stopped = 0;
+				port->ops->start_tx(port, 0);
+				uart_write_wakeup(port);
+			}
+		} else {
+			if (!status) {
+				tty->hw_stopped = 1;
+				port->ops->stop_tx(port, 0);
+			}
+		}
+	}
+}
+
+/*
+ *	UART_ENABLE_MS - determine if port should enable modem status irqs
+ */
+#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
+					 (cflag) & CRTSCTS || \
+					 !((cflag) & CLOCAL))
+
+#endif
+
+#endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
new file mode 100644
index 000000000000..6a2bb955844b
--- /dev/null
+++ b/include/linux/serial_reg.h
@@ -0,0 +1,325 @@
+/*
+ * include/linux/serial_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ * 
+ * These are the UART port assignments, expressed as offsets from the base
+ * register.  These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _LINUX_SERIAL_REG_H
+#define _LINUX_SERIAL_REG_H
+
+/*
+ * DLAB=0
+ */
+#define UART_RX		0	/* In:  Receive buffer */
+#define UART_TX		0	/* Out: Transmit buffer */
+
+#define UART_IER	1	/* Out: Interrupt Enable Register */
+#define UART_IER_MSI		0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP		0x10 /* Enable sleep mode */
+
+#define UART_IIR	2	/* In:  Interrupt ID Register */
+#define UART_IIR_NO_INT		0x01 /* No interrupts pending */
+#define UART_IIR_ID		0x06 /* Mask for the interrupt ID */
+#define UART_IIR_MSI		0x00 /* Modem status interrupt */
+#define UART_IIR_THRI		0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI		0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI		0x06 /* Receiver line status interrupt */
+
+#define UART_FCR	2	/* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ *	RX:76 = 00  01  10  11	TX:54 = 00  01  10  11
+ * PC16550D:	 1   4   8  14		xx  xx  xx  xx
+ * TI16C550A:	 1   4   8  14          xx  xx  xx  xx
+ * TI16C550C:	 1   4   8  14          xx  xx  xx  xx
+ * ST16C550:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C650:	 8  16  24  28		16   8  24  30	PORT_16650V2
+ * NS16C552:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
+ * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
+ * TI16C752:	 8  16  56  60		 8  16  32  56
+ */
+#define UART_FCR_R_TRIG_00	0x00
+#define UART_FCR_R_TRIG_01	0x40
+#define UART_FCR_R_TRIG_10	0x80
+#define UART_FCR_R_TRIG_11	0xc0
+#define UART_FCR_T_TRIG_00	0x00
+#define UART_FCR_T_TRIG_01	0x10
+#define UART_FCR_T_TRIG_10	0x20
+#define UART_FCR_T_TRIG_11	0x30
+
+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode (TI16C750) */
+
+#define UART_LCR	3	/* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting 
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB		0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC		0x40 /* Set break control */
+#define UART_LCR_SPAR		0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR		0x10 /* Even parity select */
+#define UART_LCR_PARITY		0x08 /* Parity Enable */
+#define UART_LCR_STOP		0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5		0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6		0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
+
+#define UART_MCR	4	/* Out: Modem Control Register */
+#define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY		0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE		0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP		0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2		0x08 /* Out2 complement */
+#define UART_MCR_OUT1		0x04 /* Out1 complement */
+#define UART_MCR_RTS		0x02 /* RTS complement */
+#define UART_MCR_DTR		0x01 /* DTR complement */
+
+#define UART_LSR	5	/* In:  Line Status Register */
+#define UART_LSR_TEMT		0x40 /* Transmitter empty */
+#define UART_LSR_THRE		0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI		0x10 /* Break interrupt indicator */
+#define UART_LSR_FE		0x08 /* Frame error indicator */
+#define UART_LSR_PE		0x04 /* Parity error indicator */
+#define UART_LSR_OE		0x02 /* Overrun error indicator */
+#define UART_LSR_DR		0x01 /* Receiver data ready */
+
+#define UART_MSR	6	/* In:  Modem Status Register */
+#define UART_MSR_DCD		0x80 /* Data Carrier Detect */
+#define UART_MSR_RI		0x40 /* Ring Indicator */
+#define UART_MSR_DSR		0x20 /* Data Set Ready */
+#define UART_MSR_CTS		0x10 /* Clear to Send */
+#define UART_MSR_DDCD		0x08 /* Delta DCD */
+#define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR		0x02 /* Delta DSR */
+#define UART_MSR_DCTS		0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
+
+#define UART_SCR	7	/* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define UART_DLL	0	/* Out: Divisor Latch Low */
+#define UART_DLM	1	/* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+#define UART_EFR	2	/* I/O: Extended Features Register */
+#define UART_EFR_CTS		0x80 /* CTS flow control */
+#define UART_EFR_RTS		0x40 /* RTS flow control */
+#define UART_EFR_SCD		0x20 /* Special character detect */
+#define UART_EFR_ECB		0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1	4	/* I/O: Xon character 1 */
+#define UART_XON2	5	/* I/O: Xon character 2 */
+#define UART_XOFF1	6	/* I/O: Xoff character 1 */
+#define UART_XOFF2	7	/* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR	6	/* I/O: transmission control register */
+#define UART_TI752_TLR	7	/* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+#define UART_TRG	0	/* FCTR bit 7 selects Rx or Tx
+				 * In: Fifo count
+				 * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1		0x01
+#define UART_TRG_4		0x04
+#define UART_TRG_8		0x08
+#define UART_TRG_16		0x10
+#define UART_TRG_32		0x20
+#define UART_TRG_64		0x40
+#define UART_TRG_96		0x60
+#define UART_TRG_120		0x78
+#define UART_TRG_128		0x80
+
+#define UART_FCTR	1	/* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY	0x00  /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY	0x01
+#define UART_FCTR_RTS_6DELAY	0x02
+#define UART_FCTR_RTS_8DELAY	0x03
+#define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
+#define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
+#define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD		0x30  /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP	0x40  /* Scratch pad register swap */
+#define UART_FCTR_RX		0x00  /* Programmable trigger mode select */
+#define UART_FCTR_TX		0x80  /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+#define UART_EMSR	7	/* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT	0x01  /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT	0x02  /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE	0x80	/* DMA Requests Enable */
+#define UART_IER_UUE	0x40	/* UART Unit Enable */
+#define UART_IER_NRZE	0x20	/* NRZ coding Enable */
+#define UART_IER_RTOIE	0x10	/* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_PXAR8	0x40	/* receive FIFO treshold = 8 */
+#define UART_FCR_PXAR16	0x80	/* receive FIFO treshold = 16 */
+#define UART_FCR_PXAR32	0xc0	/* receive FIFO treshold = 32 */
+
+
+
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR	0x01	/* Additional Status Register */
+#define UART_RFL	0x03	/* Receiver FIFO level */
+#define UART_TFL 	0x04	/* Transmitter FIFO level */
+#define UART_ICR	0x05	/* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR	0x00	/* Additional Control Register */
+#define UART_CPR	0x01	/* Clock Prescalar Register */
+#define UART_TCR	0x02	/* Times Clock Register */
+#define UART_CKS	0x03	/* Clock Select Register */
+#define UART_TTL	0x04	/* Transmitter Interrupt Trigger Level */
+#define UART_RTL	0x05	/* Receiver Interrupt Trigger Level */
+#define UART_FCL	0x06	/* Flow Control Level Lower */
+#define UART_FCH	0x07	/* Flow Control Level Higher */
+#define UART_ID1	0x08	/* ID #1 */
+#define UART_ID2	0x09	/* ID #2 */
+#define UART_ID3	0x0A	/* ID #3 */
+#define UART_REV	0x0B	/* Revision */
+#define UART_CSR	0x0C	/* Channel Software Reset */
+#define UART_NMR	0x0D	/* Nine-bit Mode Register */
+#define UART_CTR	0xFF
+
+/*
+ * The 16C950 Additional Control Reigster
+ */
+#define UART_ACR_RXDIS	0x01	/* Receiver disable */
+#define UART_ACR_TXDIS	0x02	/* Receiver disable */
+#define UART_ACR_DSRFC	0x04	/* DSR Flow Control */
+#define UART_ACR_TLENB	0x20	/* 950 trigger levels enable */
+#define UART_ACR_ICRRD	0x40	/* ICR Read enable */
+#define UART_ACR_ASREN	0x80	/* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies.  One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1		0x08	/* Mode definition register */
+#define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
+#define UART_OMAP_SCR		0x10	/* Supplementary control register */
+#define UART_OMAP_SSR		0x11	/* Supplementary status register */
+#define UART_OMAP_EBLR		0x12	/* BOF length register */
+#define UART_OMAP_OSC_12M_SEL	0x13	/* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER		0x14	/* Module version register */
+#define UART_OMAP_SYSC		0x15	/* System configuration register */
+#define UART_OMAP_SYSS		0x16	/* System status register */
+
+#endif /* _LINUX_SERIAL_REG_H */
+
diff --git a/include/linux/serio.h b/include/linux/serio.h
new file mode 100644
index 000000000000..a2d3b9ae06f4
--- /dev/null
+++ b/include/linux/serio.h
@@ -0,0 +1,214 @@
+#ifndef _SERIO_H
+#define _SERIO_H
+
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct serio {
+	void *port_data;
+
+	char name[32];
+	char phys[32];
+
+	unsigned int manual_bind;
+
+	struct serio_device_id id;
+
+	spinlock_t lock;		/* protects critical sections from port's interrupt handler */
+
+	int (*write)(struct serio *, unsigned char);
+	int (*open)(struct serio *);
+	void (*close)(struct serio *);
+	int (*start)(struct serio *);
+	void (*stop)(struct serio *);
+
+	struct serio *parent, *child;
+
+	struct serio_driver *drv;	/* accessed from interrupt, must be protected by serio->lock and serio->sem */
+	struct semaphore drv_sem;	/* protects serio->drv so attributes can pin driver */
+
+	struct device dev;
+	unsigned int registered;	/* port has been fully registered with driver core */
+
+	struct list_head node;
+};
+#define to_serio_port(d)	container_of(d, struct serio, dev)
+
+struct serio_driver {
+	void *private;
+	char *description;
+
+	struct serio_device_id *id_table;
+	unsigned int manual_bind;
+
+	void (*write_wakeup)(struct serio *);
+	irqreturn_t (*interrupt)(struct serio *, unsigned char,
+			unsigned int, struct pt_regs *);
+	int  (*connect)(struct serio *, struct serio_driver *drv);
+	int  (*reconnect)(struct serio *);
+	void (*disconnect)(struct serio *);
+	void (*cleanup)(struct serio *);
+
+	struct device_driver driver;
+};
+#define to_serio_driver(d)	container_of(d, struct serio_driver, driver)
+
+int serio_open(struct serio *serio, struct serio_driver *drv);
+void serio_close(struct serio *serio);
+void serio_rescan(struct serio *serio);
+void serio_reconnect(struct serio *serio);
+irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struct pt_regs *regs);
+
+void __serio_register_port(struct serio *serio, struct module *owner);
+static inline void serio_register_port(struct serio *serio)
+{
+	__serio_register_port(serio, THIS_MODULE);
+}
+
+void serio_unregister_port(struct serio *serio);
+void __serio_unregister_port_delayed(struct serio *serio, struct module *owner);
+static inline void serio_unregister_port_delayed(struct serio *serio)
+{
+	__serio_unregister_port_delayed(serio, THIS_MODULE);
+}
+
+void __serio_register_driver(struct serio_driver *drv, struct module *owner);
+static inline void serio_register_driver(struct serio_driver *drv)
+{
+	__serio_register_driver(drv, THIS_MODULE);
+}
+
+void serio_unregister_driver(struct serio_driver *drv);
+
+static inline int serio_write(struct serio *serio, unsigned char data)
+{
+	if (serio->write)
+		return serio->write(serio, data);
+	else
+		return -1;
+}
+
+static inline void serio_drv_write_wakeup(struct serio *serio)
+{
+	if (serio->drv && serio->drv->write_wakeup)
+		serio->drv->write_wakeup(serio);
+}
+
+static inline void serio_cleanup(struct serio *serio)
+{
+	if (serio->drv && serio->drv->cleanup)
+		serio->drv->cleanup(serio);
+}
+
+/*
+ * Use the following fucntions to manipulate serio's per-port
+ * driver-specific data.
+ */
+static inline void *serio_get_drvdata(struct serio *serio)
+{
+	return dev_get_drvdata(&serio->dev);
+}
+
+static inline void serio_set_drvdata(struct serio *serio, void *data)
+{
+	dev_set_drvdata(&serio->dev, data);
+}
+
+/*
+ * Use the following fucntions to protect critical sections in
+ * driver code from port's interrupt handler
+ */
+static inline void serio_pause_rx(struct serio *serio)
+{
+	spin_lock_irq(&serio->lock);
+}
+
+static inline void serio_continue_rx(struct serio *serio)
+{
+	spin_unlock_irq(&serio->lock);
+}
+
+/*
+ * Use the following fucntions to pin serio's driver in process context
+ */
+static inline int serio_pin_driver(struct serio *serio)
+{
+	return down_interruptible(&serio->drv_sem);
+}
+
+static inline void serio_unpin_driver(struct serio *serio)
+{
+	up(&serio->drv_sem);
+}
+
+
+#endif
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT	1
+#define SERIO_PARITY	2
+#define SERIO_FRAME	4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT	0x00
+#define SERIO_8042	0x01
+#define SERIO_RS232	0x02
+#define SERIO_HIL_MLC	0x03
+#define SERIO_PS_PSTHRU	0x05
+#define SERIO_8042_XL	0x06
+
+/*
+ * Serio types
+ */
+#define SERIO_UNKNOWN	0x00
+#define SERIO_MSC	0x01
+#define SERIO_SUN	0x02
+#define SERIO_MS	0x03
+#define SERIO_MP	0x04
+#define SERIO_MZ	0x05
+#define SERIO_MZP	0x06
+#define SERIO_MZPP	0x07
+#define SERIO_VSXXXAA	0x08
+#define SERIO_SUNKBD	0x10
+#define SERIO_WARRIOR	0x18
+#define SERIO_SPACEORB	0x19
+#define SERIO_MAGELLAN	0x1a
+#define SERIO_SPACEBALL	0x1b
+#define SERIO_GUNZE	0x1c
+#define SERIO_IFORCE	0x1d
+#define SERIO_STINGER	0x1e
+#define SERIO_NEWTON	0x1f
+#define SERIO_STOWAWAY	0x20
+#define SERIO_H3600	0x21
+#define SERIO_PS2SER	0x22
+#define SERIO_TWIDKBD	0x23
+#define SERIO_TWIDJOY	0x24
+#define SERIO_HIL	0x25
+#define SERIO_SNES232	0x26
+#define SERIO_SEMTECH	0x27
+#define SERIO_LKKBD	0x28
+#define SERIO_ELO	0x29
+#define SERIO_MICROTOUCH	0x30
+
+#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
new file mode 100644
index 000000000000..80113a1f60bc
--- /dev/null
+++ b/include/linux/shm.h
@@ -0,0 +1,108 @@
+#ifndef _LINUX_SHM_H_
+#define _LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#include <asm/page.h>
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
+#define SHMMIN 1			 /* min shared seg size (bytes) */
+#define SHMMNI 4096			 /* max num of segs system wide */
+#define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
+#define SHMSEG SHMMNI			 /* max shared segs per process */
+
+#include <asm/shmparam.h>
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+	struct ipc_perm		shm_perm;	/* operation perms */
+	int			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
+	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
+	unsigned short		shm_nattch;	/* no. of current attaches */
+	unsigned short 		shm_unused;	/* compatibility */
+	void 			*shm_unused2;	/* ditto - used by DIPC */
+	void			*shm_unused3;	/* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
+#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define	SHM_RDONLY	010000	/* read-only access */
+#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
+#define	SHM_REMAP	040000	/* take-over region on attach */
+#define	SHM_EXEC	0100000	/* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 	11
+#define SHM_UNLOCK 	12
+
+/* ipcs ctl commands */
+#define SHM_STAT 	13
+#define SHM_INFO 	14
+
+/* Obsolete, used only for backwards compatibility */
+struct	shminfo {
+	int shmmax;
+	int shmmin;
+	int shmmni;
+	int shmseg;
+	int shmall;
+};
+
+struct shm_info {
+	int used_ids;
+	unsigned long shm_tot;	/* total allocated shm */
+	unsigned long shm_rss;	/* total resident shm */
+	unsigned long shm_swp;	/* total swapped shm */
+	unsigned long swap_attempts;
+	unsigned long swap_successes;
+};
+
+#ifdef __KERNEL__
+struct shmid_kernel /* private to the kernel */
+{	
+	struct kern_ipc_perm	shm_perm;
+	struct file *		shm_file;
+	int			id;
+	unsigned long		shm_nattch;
+	unsigned long		shm_segsz;
+	time_t			shm_atim;
+	time_t			shm_dtim;
+	time_t			shm_ctim;
+	pid_t			shm_cprid;
+	pid_t			shm_lprid;
+	struct user_struct	*mlock_user;
+};
+
+/* shm_mode upper byte flags */
+#define	SHM_DEST	01000	/* segment will be destroyed on last detach */
+#define SHM_LOCKED      02000   /* segment will not be swapped */
+#define SHM_HUGETLB     04000   /* segment will use huge TLB pages */
+
+#ifdef CONFIG_SYSVIPC
+long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr);
+#else
+static inline long do_shmat(int shmid, char __user *shmaddr,
+				int shmflg, unsigned long *addr)
+{
+	return -ENOSYS;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
new file mode 100644
index 000000000000..c3e598276e78
--- /dev/null
+++ b/include/linux/shmem_fs.h
@@ -0,0 +1,37 @@
+#ifndef __SHMEM_FS_H
+#define __SHMEM_FS_H
+
+#include <linux/swap.h>
+#include <linux/mempolicy.h>
+
+/* inode in-kernel data */
+
+#define SHMEM_NR_DIRECT 16
+
+struct shmem_inode_info {
+	spinlock_t		lock;
+	unsigned long		flags;
+	unsigned long		alloced;	/* data pages alloced to file */
+	unsigned long		swapped;	/* subtotal assigned to swap */
+	unsigned long		next_index;	/* highest alloced index + 1 */
+	struct shared_policy	policy;		/* NUMA memory alloc policy */
+	struct page		*i_indirect;	/* top indirect blocks page */
+	swp_entry_t		i_direct[SHMEM_NR_DIRECT]; /* first blocks */
+	struct list_head	swaplist;	/* chain of maybes on swap */
+	struct inode		vfs_inode;
+};
+
+struct shmem_sb_info {
+	unsigned long max_blocks;   /* How many blocks are allowed */
+	unsigned long free_blocks;  /* How many are left for allocation */
+	unsigned long max_inodes;   /* How many inodes are allowed */
+	unsigned long free_inodes;  /* How many are left for allocation */
+	spinlock_t    stat_lock;
+};
+
+static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
+{
+	return container_of(inode, struct shmem_inode_info, vfs_inode);
+}
+
+#endif
diff --git a/include/linux/signal.h b/include/linux/signal.h
new file mode 100644
index 000000000000..99c97ad026c8
--- /dev/null
+++ b/include/linux/signal.h
@@ -0,0 +1,224 @@
+#ifndef _LINUX_SIGNAL_H
+#define _LINUX_SIGNAL_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Real Time signals may be queued.
+ */
+
+struct sigqueue {
+	struct list_head list;
+	spinlock_t *lock;
+	int flags;
+	siginfo_t info;
+	struct user_struct *user;
+};
+
+/* flags values. */
+#define SIGQUEUE_PREALLOC	1
+
+struct sigpending {
+	struct list_head list;
+	sigset_t signal;
+};
+
+/*
+ * Define some primitives to manipulate sigset_t.
+ */
+
+#ifndef __HAVE_ARCH_SIG_BITOPS
+#include <linux/bitops.h>
+
+/* We don't use <linux/bitops.h> for these because there is no need to
+   be atomic.  */
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		set->sig[0] |= 1UL << sig;
+	else
+		set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		set->sig[0] &= ~(1UL << sig);
+	else
+		set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
+}
+
+static inline int sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		return 1 & (set->sig[0] >> sig);
+	else
+		return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int sigfindinword(unsigned long word)
+{
+	return ffz(~word);
+}
+
+#endif /* __HAVE_ARCH_SIG_BITOPS */
+
+#define sigmask(sig)	(1UL << ((sig) - 1))
+
+#ifndef __HAVE_ARCH_SIG_SETOPS
+#include <linux/string.h>
+
+#define _SIG_SET_BINOP(name, op)					\
+static inline void name(sigset_t *r, const sigset_t *a, const sigset_t *b) \
+{									\
+	extern void _NSIG_WORDS_is_unsupported_size(void);		\
+	unsigned long a0, a1, a2, a3, b0, b1, b2, b3;			\
+									\
+	switch (_NSIG_WORDS) {						\
+	    case 4:							\
+		a3 = a->sig[3]; a2 = a->sig[2];				\
+		b3 = b->sig[3]; b2 = b->sig[2];				\
+		r->sig[3] = op(a3, b3);					\
+		r->sig[2] = op(a2, b2);					\
+	    case 2:							\
+		a1 = a->sig[1]; b1 = b->sig[1];				\
+		r->sig[1] = op(a1, b1);					\
+	    case 1:							\
+		a0 = a->sig[0]; b0 = b->sig[0];				\
+		r->sig[0] = op(a0, b0);					\
+		break;							\
+	    default:							\
+		_NSIG_WORDS_is_unsupported_size();			\
+	}								\
+}
+
+#define _sig_or(x,y)	((x) | (y))
+_SIG_SET_BINOP(sigorsets, _sig_or)
+
+#define _sig_and(x,y)	((x) & (y))
+_SIG_SET_BINOP(sigandsets, _sig_and)
+
+#define _sig_nand(x,y)	((x) & ~(y))
+_SIG_SET_BINOP(signandsets, _sig_nand)
+
+#undef _SIG_SET_BINOP
+#undef _sig_or
+#undef _sig_and
+#undef _sig_nand
+
+#define _SIG_SET_OP(name, op)						\
+static inline void name(sigset_t *set)					\
+{									\
+	extern void _NSIG_WORDS_is_unsupported_size(void);		\
+									\
+	switch (_NSIG_WORDS) {						\
+	    case 4: set->sig[3] = op(set->sig[3]);			\
+		    set->sig[2] = op(set->sig[2]);			\
+	    case 2: set->sig[1] = op(set->sig[1]);			\
+	    case 1: set->sig[0] = op(set->sig[0]);			\
+		    break;						\
+	    default:							\
+		_NSIG_WORDS_is_unsupported_size();			\
+	}								\
+}
+
+#define _sig_not(x)	(~(x))
+_SIG_SET_OP(signotset, _sig_not)
+
+#undef _SIG_SET_OP
+#undef _sig_not
+
+static inline void sigemptyset(sigset_t *set)
+{
+	switch (_NSIG_WORDS) {
+	default:
+		memset(set, 0, sizeof(sigset_t));
+		break;
+	case 2: set->sig[1] = 0;
+	case 1:	set->sig[0] = 0;
+		break;
+	}
+}
+
+static inline void sigfillset(sigset_t *set)
+{
+	switch (_NSIG_WORDS) {
+	default:
+		memset(set, -1, sizeof(sigset_t));
+		break;
+	case 2: set->sig[1] = -1;
+	case 1:	set->sig[0] = -1;
+		break;
+	}
+}
+
+/* Some extensions for manipulating the low 32 signals in particular.  */
+
+static inline void sigaddsetmask(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] |= mask;
+}
+
+static inline void sigdelsetmask(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] &= ~mask;
+}
+
+static inline int sigtestsetmask(sigset_t *set, unsigned long mask)
+{
+	return (set->sig[0] & mask) != 0;
+}
+
+static inline void siginitset(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] = mask;
+	switch (_NSIG_WORDS) {
+	default:
+		memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
+		break;
+	case 2: set->sig[1] = 0;
+	case 1: ;
+	}
+}
+
+static inline void siginitsetinv(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] = ~mask;
+	switch (_NSIG_WORDS) {
+	default:
+		memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
+		break;
+	case 2: set->sig[1] = -1;
+	case 1: ;
+	}
+}
+
+#endif /* __HAVE_ARCH_SIG_SETOPS */
+
+static inline void init_sigpending(struct sigpending *sig)
+{
+	sigemptyset(&sig->signal);
+	INIT_LIST_HEAD(&sig->list);
+}
+
+extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
+extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
+extern long do_sigpending(void __user *, unsigned long);
+extern int sigprocmask(int, sigset_t *, sigset_t *);
+
+#ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER
+struct pt_regs;
+extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
new file mode 100644
index 000000000000..aa35797ebfbf
--- /dev/null
+++ b/include/linux/skbuff.h
@@ -0,0 +1,1253 @@
+/*
+ *	Definitions for the 'struct sk_buff' memory handlers.
+ *
+ *	Authors:
+ *		Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *		Florian La Roche, <rzsfl@rz.uni-sb.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_SKBUFF_H
+#define _LINUX_SKBUFF_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/time.h>
+#include <linux/cache.h>
+
+#include <asm/atomic.h>
+#include <asm/types.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/poll.h>
+#include <linux/net.h>
+#include <net/checksum.h>
+
+#define HAVE_ALLOC_SKB		/* For the drivers to know */
+#define HAVE_ALIGNABLE_SKB	/* Ditto 8)		   */
+#define SLAB_SKB 		/* Slabified skbuffs 	   */
+
+#define CHECKSUM_NONE 0
+#define CHECKSUM_HW 1
+#define CHECKSUM_UNNECESSARY 2
+
+#define SKB_DATA_ALIGN(X)	(((X) + (SMP_CACHE_BYTES - 1)) & \
+				 ~(SMP_CACHE_BYTES - 1))
+#define SKB_MAX_ORDER(X, ORDER)	(((PAGE_SIZE << (ORDER)) - (X) - \
+				  sizeof(struct skb_shared_info)) & \
+				  ~(SMP_CACHE_BYTES - 1))
+#define SKB_MAX_HEAD(X)		(SKB_MAX_ORDER((X), 0))
+#define SKB_MAX_ALLOC		(SKB_MAX_ORDER(0, 2))
+
+/* A. Checksumming of received packets by device.
+ *
+ *	NONE: device failed to checksum this packet.
+ *		skb->csum is undefined.
+ *
+ *	UNNECESSARY: device parsed packet and wouldbe verified checksum.
+ *		skb->csum is undefined.
+ *	      It is bad option, but, unfortunately, many of vendors do this.
+ *	      Apparently with secret goal to sell you new device, when you
+ *	      will add new protocol to your host. F.e. IPv6. 8)
+ *
+ *	HW: the most generic way. Device supplied checksum of _all_
+ *	    the packet as seen by netif_rx in skb->csum.
+ *	    NOTE: Even if device supports only some protocols, but
+ *	    is able to produce some skb->csum, it MUST use HW,
+ *	    not UNNECESSARY.
+ *
+ * B. Checksumming on output.
+ *
+ *	NONE: skb is checksummed by protocol or csum is not required.
+ *
+ *	HW: device is required to csum packet as seen by hard_start_xmit
+ *	from skb->h.raw to the end and to record the checksum
+ *	at skb->h.raw+skb->csum.
+ *
+ *	Device must show its capabilities in dev->features, set
+ *	at device setup time.
+ *	NETIF_F_HW_CSUM	- it is clever device, it is able to checksum
+ *			  everything.
+ *	NETIF_F_NO_CSUM - loopback or reliable single hop media.
+ *	NETIF_F_IP_CSUM - device is dumb. It is able to csum only
+ *			  TCP/UDP over IPv4. Sigh. Vendors like this
+ *			  way by an unknown reason. Though, see comment above
+ *			  about CHECKSUM_UNNECESSARY. 8)
+ *
+ *	Any questions? No questions, good. 		--ANK
+ */
+
+#ifdef __i386__
+#define NET_CALLER(arg) (*(((void **)&arg) - 1))
+#else
+#define NET_CALLER(arg) __builtin_return_address(0)
+#endif
+
+struct net_device;
+
+#ifdef CONFIG_NETFILTER
+struct nf_conntrack {
+	atomic_t use;
+	void (*destroy)(struct nf_conntrack *);
+};
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+struct nf_bridge_info {
+	atomic_t use;
+	struct net_device *physindev;
+	struct net_device *physoutdev;
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+	struct net_device *netoutdev;
+#endif
+	unsigned int mask;
+	unsigned long data[32 / sizeof(unsigned long)];
+};
+#endif
+
+#endif
+
+struct sk_buff_head {
+	/* These two members must be first. */
+	struct sk_buff	*next;
+	struct sk_buff	*prev;
+
+	__u32		qlen;
+	spinlock_t	lock;
+};
+
+struct sk_buff;
+
+/* To allow 64K frame to be packed as single skb without frag_list */
+#define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2)
+
+typedef struct skb_frag_struct skb_frag_t;
+
+struct skb_frag_struct {
+	struct page *page;
+	__u16 page_offset;
+	__u16 size;
+};
+
+/* This data is invariant across clones and lives at
+ * the end of the header data, ie. at skb->end.
+ */
+struct skb_shared_info {
+	atomic_t	dataref;
+	unsigned int	nr_frags;
+	unsigned short	tso_size;
+	unsigned short	tso_segs;
+	struct sk_buff	*frag_list;
+	skb_frag_t	frags[MAX_SKB_FRAGS];
+};
+
+/* We divide dataref into two halves.  The higher 16 bits hold references
+ * to the payload part of skb->data.  The lower 16 bits hold references to
+ * the entire skb->data.  It is up to the users of the skb to agree on
+ * where the payload starts.
+ *
+ * All users must obey the rule that the skb->data reference count must be
+ * greater than or equal to the payload reference count.
+ *
+ * Holding a reference to the payload part means that the user does not
+ * care about modifications to the header part of skb->data.
+ */
+#define SKB_DATAREF_SHIFT 16
+#define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
+
+/** 
+ *	struct sk_buff - socket buffer
+ *	@next: Next buffer in list
+ *	@prev: Previous buffer in list
+ *	@list: List we are on
+ *	@sk: Socket we are owned by
+ *	@stamp: Time we arrived
+ *	@dev: Device we arrived on/are leaving by
+ *	@input_dev: Device we arrived on
+ *      @real_dev: The real device we are using
+ *	@h: Transport layer header
+ *	@nh: Network layer header
+ *	@mac: Link layer header
+ *	@dst: FIXME: Describe this field
+ *	@cb: Control buffer. Free for use by every layer. Put private vars here
+ *	@len: Length of actual data
+ *	@data_len: Data length
+ *	@mac_len: Length of link layer header
+ *	@csum: Checksum
+ *	@__unused: Dead field, may be reused
+ *	@cloned: Head may be cloned (check refcnt to be sure)
+ *	@nohdr: Payload reference only, must not modify header
+ *	@pkt_type: Packet class
+ *	@ip_summed: Driver fed us an IP checksum
+ *	@priority: Packet queueing priority
+ *	@users: User count - see {datagram,tcp}.c
+ *	@protocol: Packet protocol from driver
+ *	@security: Security level of packet
+ *	@truesize: Buffer size 
+ *	@head: Head of buffer
+ *	@data: Data head pointer
+ *	@tail: Tail pointer
+ *	@end: End pointer
+ *	@destructor: Destruct function
+ *	@nfmark: Can be used for communication between hooks
+ *	@nfcache: Cache info
+ *	@nfct: Associated connection, if any
+ *	@nfctinfo: Relationship of this skb to the connection
+ *	@nf_debug: Netfilter debugging
+ *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c
+ *      @private: Data which is private to the HIPPI implementation
+ *	@tc_index: Traffic control index
+ *	@tc_verd: traffic control verdict
+ *	@tc_classid: traffic control classid
+ */
+
+struct sk_buff {
+	/* These two members must be first. */
+	struct sk_buff		*next;
+	struct sk_buff		*prev;
+
+	struct sk_buff_head	*list;
+	struct sock		*sk;
+	struct timeval		stamp;
+	struct net_device	*dev;
+	struct net_device	*input_dev;
+	struct net_device	*real_dev;
+
+	union {
+		struct tcphdr	*th;
+		struct udphdr	*uh;
+		struct icmphdr	*icmph;
+		struct igmphdr	*igmph;
+		struct iphdr	*ipiph;
+		struct ipv6hdr	*ipv6h;
+		unsigned char	*raw;
+	} h;
+
+	union {
+		struct iphdr	*iph;
+		struct ipv6hdr	*ipv6h;
+		struct arphdr	*arph;
+		unsigned char	*raw;
+	} nh;
+
+	union {
+	  	unsigned char 	*raw;
+	} mac;
+
+	struct  dst_entry	*dst;
+	struct	sec_path	*sp;
+
+	/*
+	 * This is the control buffer. It is free to use for every
+	 * layer. Please put your private variables there. If you
+	 * want to keep them across layers you have to do a skb_clone()
+	 * first. This is owned by whoever has the skb queued ATM.
+	 */
+	char			cb[40];
+
+	unsigned int		len,
+				data_len,
+				mac_len,
+				csum;
+	unsigned char		local_df,
+				cloned:1,
+				nohdr:1,
+				pkt_type,
+				ip_summed;
+	__u32			priority;
+	unsigned short		protocol,
+				security;
+
+	void			(*destructor)(struct sk_buff *skb);
+#ifdef CONFIG_NETFILTER
+        unsigned long		nfmark;
+	__u32			nfcache;
+	__u32			nfctinfo;
+	struct nf_conntrack	*nfct;
+#ifdef CONFIG_NETFILTER_DEBUG
+        unsigned int		nf_debug;
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+	struct nf_bridge_info	*nf_bridge;
+#endif
+#endif /* CONFIG_NETFILTER */
+#if defined(CONFIG_HIPPI)
+	union {
+		__u32		ifield;
+	} private;
+#endif
+#ifdef CONFIG_NET_SCHED
+       __u32			tc_index;        /* traffic control index */
+#ifdef CONFIG_NET_CLS_ACT
+	__u32           tc_verd;               /* traffic control verdict */
+	__u32           tc_classid;            /* traffic control classid */
+#endif
+
+#endif
+
+
+	/* These elements must be at the end, see alloc_skb() for details.  */
+	unsigned int		truesize;
+	atomic_t		users;
+	unsigned char		*head,
+				*data,
+				*tail,
+				*end;
+};
+
+#ifdef __KERNEL__
+/*
+ *	Handling routines are only of interest to the kernel
+ */
+#include <linux/slab.h>
+
+#include <asm/system.h>
+
+extern void	       __kfree_skb(struct sk_buff *skb);
+extern struct sk_buff *alloc_skb(unsigned int size, int priority);
+extern struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp,
+					    unsigned int size, int priority);
+extern void	       kfree_skbmem(struct sk_buff *skb);
+extern struct sk_buff *skb_clone(struct sk_buff *skb, int priority);
+extern struct sk_buff *skb_copy(const struct sk_buff *skb, int priority);
+extern struct sk_buff *pskb_copy(struct sk_buff *skb, int gfp_mask);
+extern int	       pskb_expand_head(struct sk_buff *skb,
+					int nhead, int ntail, int gfp_mask);
+extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
+					    unsigned int headroom);
+extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
+				       int newheadroom, int newtailroom,
+				       int priority);
+extern struct sk_buff *		skb_pad(struct sk_buff *skb, int pad);
+#define dev_kfree_skb(a)	kfree_skb(a)
+extern void	      skb_over_panic(struct sk_buff *skb, int len,
+				     void *here);
+extern void	      skb_under_panic(struct sk_buff *skb, int len,
+				      void *here);
+
+/* Internal */
+#define skb_shinfo(SKB)		((struct skb_shared_info *)((SKB)->end))
+
+/**
+ *	skb_queue_empty - check if a queue is empty
+ *	@list: queue head
+ *
+ *	Returns true if the queue is empty, false otherwise.
+ */
+static inline int skb_queue_empty(const struct sk_buff_head *list)
+{
+	return list->next == (struct sk_buff *)list;
+}
+
+/**
+ *	skb_get - reference buffer
+ *	@skb: buffer to reference
+ *
+ *	Makes another reference to a socket buffer and returns a pointer
+ *	to the buffer.
+ */
+static inline struct sk_buff *skb_get(struct sk_buff *skb)
+{
+	atomic_inc(&skb->users);
+	return skb;
+}
+
+/*
+ * If users == 1, we are the only owner and are can avoid redundant
+ * atomic change.
+ */
+
+/**
+ *	kfree_skb - free an sk_buff
+ *	@skb: buffer to free
+ *
+ *	Drop a reference to the buffer and free it if the usage count has
+ *	hit zero.
+ */
+static inline void kfree_skb(struct sk_buff *skb)
+{
+	if (likely(atomic_read(&skb->users) == 1))
+		smp_rmb();
+	else if (likely(!atomic_dec_and_test(&skb->users)))
+		return;
+	__kfree_skb(skb);
+}
+
+/**
+ *	skb_cloned - is the buffer a clone
+ *	@skb: buffer to check
+ *
+ *	Returns true if the buffer was generated with skb_clone() and is
+ *	one of multiple shared copies of the buffer. Cloned buffers are
+ *	shared data so must not be written to under normal circumstances.
+ */
+static inline int skb_cloned(const struct sk_buff *skb)
+{
+	return skb->cloned &&
+	       (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1;
+}
+
+/**
+ *	skb_header_cloned - is the header a clone
+ *	@skb: buffer to check
+ *
+ *	Returns true if modifying the header part of the buffer requires
+ *	the data to be copied.
+ */
+static inline int skb_header_cloned(const struct sk_buff *skb)
+{
+	int dataref;
+
+	if (!skb->cloned)
+		return 0;
+
+	dataref = atomic_read(&skb_shinfo(skb)->dataref);
+	dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT);
+	return dataref != 1;
+}
+
+/**
+ *	skb_header_release - release reference to header
+ *	@skb: buffer to operate on
+ *
+ *	Drop a reference to the header part of the buffer.  This is done
+ *	by acquiring a payload reference.  You must not read from the header
+ *	part of skb->data after this.
+ */
+static inline void skb_header_release(struct sk_buff *skb)
+{
+	BUG_ON(skb->nohdr);
+	skb->nohdr = 1;
+	atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref);
+}
+
+/**
+ *	skb_shared - is the buffer shared
+ *	@skb: buffer to check
+ *
+ *	Returns true if more than one person has a reference to this
+ *	buffer.
+ */
+static inline int skb_shared(const struct sk_buff *skb)
+{
+	return atomic_read(&skb->users) != 1;
+}
+
+/**
+ *	skb_share_check - check if buffer is shared and if so clone it
+ *	@skb: buffer to check
+ *	@pri: priority for memory allocation
+ *
+ *	If the buffer is shared the buffer is cloned and the old copy
+ *	drops a reference. A new clone with a single reference is returned.
+ *	If the buffer is not shared the original buffer is returned. When
+ *	being called from interrupt status or with spinlocks held pri must
+ *	be GFP_ATOMIC.
+ *
+ *	NULL is returned on a memory allocation failure.
+ */
+static inline struct sk_buff *skb_share_check(struct sk_buff *skb, int pri)
+{
+	might_sleep_if(pri & __GFP_WAIT);
+	if (skb_shared(skb)) {
+		struct sk_buff *nskb = skb_clone(skb, pri);
+		kfree_skb(skb);
+		skb = nskb;
+	}
+	return skb;
+}
+
+/*
+ *	Copy shared buffers into a new sk_buff. We effectively do COW on
+ *	packets to handle cases where we have a local reader and forward
+ *	and a couple of other messy ones. The normal one is tcpdumping
+ *	a packet thats being forwarded.
+ */
+
+/**
+ *	skb_unshare - make a copy of a shared buffer
+ *	@skb: buffer to check
+ *	@pri: priority for memory allocation
+ *
+ *	If the socket buffer is a clone then this function creates a new
+ *	copy of the data, drops a reference count on the old copy and returns
+ *	the new copy with the reference count at 1. If the buffer is not a clone
+ *	the original buffer is returned. When called with a spinlock held or
+ *	from interrupt state @pri must be %GFP_ATOMIC
+ *
+ *	%NULL is returned on a memory allocation failure.
+ */
+static inline struct sk_buff *skb_unshare(struct sk_buff *skb, int pri)
+{
+	might_sleep_if(pri & __GFP_WAIT);
+	if (skb_cloned(skb)) {
+		struct sk_buff *nskb = skb_copy(skb, pri);
+		kfree_skb(skb);	/* Free our shared copy */
+		skb = nskb;
+	}
+	return skb;
+}
+
+/**
+ *	skb_peek
+ *	@list_: list to peek at
+ *
+ *	Peek an &sk_buff. Unlike most other operations you _MUST_
+ *	be careful with this one. A peek leaves the buffer on the
+ *	list and someone else may run off with it. You must hold
+ *	the appropriate locks or have a private queue to do this.
+ *
+ *	Returns %NULL for an empty list or a pointer to the head element.
+ *	The reference count is not incremented and the reference is therefore
+ *	volatile. Use with caution.
+ */
+static inline struct sk_buff *skb_peek(struct sk_buff_head *list_)
+{
+	struct sk_buff *list = ((struct sk_buff *)list_)->next;
+	if (list == (struct sk_buff *)list_)
+		list = NULL;
+	return list;
+}
+
+/**
+ *	skb_peek_tail
+ *	@list_: list to peek at
+ *
+ *	Peek an &sk_buff. Unlike most other operations you _MUST_
+ *	be careful with this one. A peek leaves the buffer on the
+ *	list and someone else may run off with it. You must hold
+ *	the appropriate locks or have a private queue to do this.
+ *
+ *	Returns %NULL for an empty list or a pointer to the tail element.
+ *	The reference count is not incremented and the reference is therefore
+ *	volatile. Use with caution.
+ */
+static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_)
+{
+	struct sk_buff *list = ((struct sk_buff *)list_)->prev;
+	if (list == (struct sk_buff *)list_)
+		list = NULL;
+	return list;
+}
+
+/**
+ *	skb_queue_len	- get queue length
+ *	@list_: list to measure
+ *
+ *	Return the length of an &sk_buff queue.
+ */
+static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
+{
+	return list_->qlen;
+}
+
+static inline void skb_queue_head_init(struct sk_buff_head *list)
+{
+	spin_lock_init(&list->lock);
+	list->prev = list->next = (struct sk_buff *)list;
+	list->qlen = 0;
+}
+
+/*
+ *	Insert an sk_buff at the start of a list.
+ *
+ *	The "__skb_xxxx()" functions are the non-atomic ones that
+ *	can only be called with interrupts disabled.
+ */
+
+/**
+ *	__skb_queue_head - queue a buffer at the list head
+ *	@list: list to use
+ *	@newsk: buffer to queue
+ *
+ *	Queue a buffer at the start of a list. This function takes no locks
+ *	and you must therefore hold required locks before calling it.
+ *
+ *	A buffer cannot be placed on two lists at the same time.
+ */
+extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk);
+static inline void __skb_queue_head(struct sk_buff_head *list,
+				    struct sk_buff *newsk)
+{
+	struct sk_buff *prev, *next;
+
+	newsk->list = list;
+	list->qlen++;
+	prev = (struct sk_buff *)list;
+	next = prev->next;
+	newsk->next = next;
+	newsk->prev = prev;
+	next->prev  = prev->next = newsk;
+}
+
+/**
+ *	__skb_queue_tail - queue a buffer at the list tail
+ *	@list: list to use
+ *	@newsk: buffer to queue
+ *
+ *	Queue a buffer at the end of a list. This function takes no locks
+ *	and you must therefore hold required locks before calling it.
+ *
+ *	A buffer cannot be placed on two lists at the same time.
+ */
+extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk);
+static inline void __skb_queue_tail(struct sk_buff_head *list,
+				   struct sk_buff *newsk)
+{
+	struct sk_buff *prev, *next;
+
+	newsk->list = list;
+	list->qlen++;
+	next = (struct sk_buff *)list;
+	prev = next->prev;
+	newsk->next = next;
+	newsk->prev = prev;
+	next->prev  = prev->next = newsk;
+}
+
+
+/**
+ *	__skb_dequeue - remove from the head of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the head of the list. This function does not take any locks
+ *	so must be used with appropriate locks held only. The head item is
+ *	returned or %NULL if the list is empty.
+ */
+extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
+static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
+{
+	struct sk_buff *next, *prev, *result;
+
+	prev = (struct sk_buff *) list;
+	next = prev->next;
+	result = NULL;
+	if (next != prev) {
+		result	     = next;
+		next	     = next->next;
+		list->qlen--;
+		next->prev   = prev;
+		prev->next   = next;
+		result->next = result->prev = NULL;
+		result->list = NULL;
+	}
+	return result;
+}
+
+
+/*
+ *	Insert a packet on a list.
+ */
+extern void        skb_insert(struct sk_buff *old, struct sk_buff *newsk);
+static inline void __skb_insert(struct sk_buff *newsk,
+				struct sk_buff *prev, struct sk_buff *next,
+				struct sk_buff_head *list)
+{
+	newsk->next = next;
+	newsk->prev = prev;
+	next->prev  = prev->next = newsk;
+	newsk->list = list;
+	list->qlen++;
+}
+
+/*
+ *	Place a packet after a given packet in a list.
+ */
+extern void	   skb_append(struct sk_buff *old, struct sk_buff *newsk);
+static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk)
+{
+	__skb_insert(newsk, old, old->next, old->list);
+}
+
+/*
+ * remove sk_buff from list. _Must_ be called atomically, and with
+ * the list known..
+ */
+extern void	   skb_unlink(struct sk_buff *skb);
+static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
+{
+	struct sk_buff *next, *prev;
+
+	list->qlen--;
+	next	   = skb->next;
+	prev	   = skb->prev;
+	skb->next  = skb->prev = NULL;
+	skb->list  = NULL;
+	next->prev = prev;
+	prev->next = next;
+}
+
+
+/* XXX: more streamlined implementation */
+
+/**
+ *	__skb_dequeue_tail - remove from the tail of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the tail of the list. This function does not take any locks
+ *	so must be used with appropriate locks held only. The tail item is
+ *	returned or %NULL if the list is empty.
+ */
+extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list);
+static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list)
+{
+	struct sk_buff *skb = skb_peek_tail(list);
+	if (skb)
+		__skb_unlink(skb, list);
+	return skb;
+}
+
+
+static inline int skb_is_nonlinear(const struct sk_buff *skb)
+{
+	return skb->data_len;
+}
+
+static inline unsigned int skb_headlen(const struct sk_buff *skb)
+{
+	return skb->len - skb->data_len;
+}
+
+static inline int skb_pagelen(const struct sk_buff *skb)
+{
+	int i, len = 0;
+
+	for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--)
+		len += skb_shinfo(skb)->frags[i].size;
+	return len + skb_headlen(skb);
+}
+
+static inline void skb_fill_page_desc(struct sk_buff *skb, int i,
+				      struct page *page, int off, int size)
+{
+	skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+	frag->page		  = page;
+	frag->page_offset	  = off;
+	frag->size		  = size;
+	skb_shinfo(skb)->nr_frags = i + 1;
+}
+
+#define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags)
+#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->frag_list)
+#define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb))
+
+/*
+ *	Add data to an sk_buff
+ */
+static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len)
+{
+	unsigned char *tmp = skb->tail;
+	SKB_LINEAR_ASSERT(skb);
+	skb->tail += len;
+	skb->len  += len;
+	return tmp;
+}
+
+/**
+ *	skb_put - add data to a buffer
+ *	@skb: buffer to use
+ *	@len: amount of data to add
+ *
+ *	This function extends the used data area of the buffer. If this would
+ *	exceed the total buffer size the kernel will panic. A pointer to the
+ *	first byte of the extra data is returned.
+ */
+static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len)
+{
+	unsigned char *tmp = skb->tail;
+	SKB_LINEAR_ASSERT(skb);
+	skb->tail += len;
+	skb->len  += len;
+	if (unlikely(skb->tail>skb->end))
+		skb_over_panic(skb, len, current_text_addr());
+	return tmp;
+}
+
+static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len)
+{
+	skb->data -= len;
+	skb->len  += len;
+	return skb->data;
+}
+
+/**
+ *	skb_push - add data to the start of a buffer
+ *	@skb: buffer to use
+ *	@len: amount of data to add
+ *
+ *	This function extends the used data area of the buffer at the buffer
+ *	start. If this would exceed the total buffer headroom the kernel will
+ *	panic. A pointer to the first byte of the extra data is returned.
+ */
+static inline unsigned char *skb_push(struct sk_buff *skb, unsigned int len)
+{
+	skb->data -= len;
+	skb->len  += len;
+	if (unlikely(skb->data<skb->head))
+		skb_under_panic(skb, len, current_text_addr());
+	return skb->data;
+}
+
+static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
+{
+	skb->len -= len;
+	BUG_ON(skb->len < skb->data_len);
+	return skb->data += len;
+}
+
+/**
+ *	skb_pull - remove data from the start of a buffer
+ *	@skb: buffer to use
+ *	@len: amount of data to remove
+ *
+ *	This function removes data from the start of a buffer, returning
+ *	the memory to the headroom. A pointer to the next data in the buffer
+ *	is returned. Once the data has been pulled future pushes will overwrite
+ *	the old data.
+ */
+static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len)
+{
+	return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
+}
+
+extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
+
+static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
+{
+	if (len > skb_headlen(skb) &&
+	    !__pskb_pull_tail(skb, len-skb_headlen(skb)))
+		return NULL;
+	skb->len -= len;
+	return skb->data += len;
+}
+
+static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len)
+{
+	return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len);
+}
+
+static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
+{
+	if (likely(len <= skb_headlen(skb)))
+		return 1;
+	if (unlikely(len > skb->len))
+		return 0;
+	return __pskb_pull_tail(skb, len-skb_headlen(skb)) != NULL;
+}
+
+/**
+ *	skb_headroom - bytes at buffer head
+ *	@skb: buffer to check
+ *
+ *	Return the number of bytes of free space at the head of an &sk_buff.
+ */
+static inline int skb_headroom(const struct sk_buff *skb)
+{
+	return skb->data - skb->head;
+}
+
+/**
+ *	skb_tailroom - bytes at buffer end
+ *	@skb: buffer to check
+ *
+ *	Return the number of bytes of free space at the tail of an sk_buff
+ */
+static inline int skb_tailroom(const struct sk_buff *skb)
+{
+	return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail;
+}
+
+/**
+ *	skb_reserve - adjust headroom
+ *	@skb: buffer to alter
+ *	@len: bytes to move
+ *
+ *	Increase the headroom of an empty &sk_buff by reducing the tail
+ *	room. This is only allowed for an empty buffer.
+ */
+static inline void skb_reserve(struct sk_buff *skb, unsigned int len)
+{
+	skb->data += len;
+	skb->tail += len;
+}
+
+/*
+ * CPUs often take a performance hit when accessing unaligned memory
+ * locations. The actual performance hit varies, it can be small if the
+ * hardware handles it or large if we have to take an exception and fix it
+ * in software.
+ *
+ * Since an ethernet header is 14 bytes network drivers often end up with
+ * the IP header at an unaligned offset. The IP header can be aligned by
+ * shifting the start of the packet by 2 bytes. Drivers should do this
+ * with:
+ *
+ * skb_reserve(NET_IP_ALIGN);
+ *
+ * The downside to this alignment of the IP header is that the DMA is now
+ * unaligned. On some architectures the cost of an unaligned DMA is high
+ * and this cost outweighs the gains made by aligning the IP header.
+ * 
+ * Since this trade off varies between architectures, we allow NET_IP_ALIGN
+ * to be overridden.
+ */
+#ifndef NET_IP_ALIGN
+#define NET_IP_ALIGN	2
+#endif
+
+extern int ___pskb_trim(struct sk_buff *skb, unsigned int len, int realloc);
+
+static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+{
+	if (!skb->data_len) {
+		skb->len  = len;
+		skb->tail = skb->data + len;
+	} else
+		___pskb_trim(skb, len, 0);
+}
+
+/**
+ *	skb_trim - remove end from a buffer
+ *	@skb: buffer to alter
+ *	@len: new length
+ *
+ *	Cut the length of a buffer down by removing data from the tail. If
+ *	the buffer is already under the length specified it is not modified.
+ */
+static inline void skb_trim(struct sk_buff *skb, unsigned int len)
+{
+	if (skb->len > len)
+		__skb_trim(skb, len);
+}
+
+
+static inline int __pskb_trim(struct sk_buff *skb, unsigned int len)
+{
+	if (!skb->data_len) {
+		skb->len  = len;
+		skb->tail = skb->data+len;
+		return 0;
+	}
+	return ___pskb_trim(skb, len, 1);
+}
+
+static inline int pskb_trim(struct sk_buff *skb, unsigned int len)
+{
+	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
+}
+
+/**
+ *	skb_orphan - orphan a buffer
+ *	@skb: buffer to orphan
+ *
+ *	If a buffer currently has an owner then we call the owner's
+ *	destructor function and make the @skb unowned. The buffer continues
+ *	to exist but is no longer charged to its former owner.
+ */
+static inline void skb_orphan(struct sk_buff *skb)
+{
+	if (skb->destructor)
+		skb->destructor(skb);
+	skb->destructor = NULL;
+	skb->sk		= NULL;
+}
+
+/**
+ *	__skb_queue_purge - empty a list
+ *	@list: list to empty
+ *
+ *	Delete all buffers on an &sk_buff list. Each buffer is removed from
+ *	the list and one reference dropped. This function does not take the
+ *	list lock and the caller must hold the relevant locks to use it.
+ */
+extern void skb_queue_purge(struct sk_buff_head *list);
+static inline void __skb_queue_purge(struct sk_buff_head *list)
+{
+	struct sk_buff *skb;
+	while ((skb = __skb_dequeue(list)) != NULL)
+		kfree_skb(skb);
+}
+
+/**
+ *	__dev_alloc_skb - allocate an skbuff for sending
+ *	@length: length to allocate
+ *	@gfp_mask: get_free_pages mask, passed to alloc_skb
+ *
+ *	Allocate a new &sk_buff and assign it a usage count of one. The
+ *	buffer has unspecified headroom built in. Users should allocate
+ *	the headroom they think they need without accounting for the
+ *	built in space. The built in space is used for optimisations.
+ *
+ *	%NULL is returned in there is no free memory.
+ */
+#ifndef CONFIG_HAVE_ARCH_DEV_ALLOC_SKB
+static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+					      int gfp_mask)
+{
+	struct sk_buff *skb = alloc_skb(length + 16, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, 16);
+	return skb;
+}
+#else
+extern struct sk_buff *__dev_alloc_skb(unsigned int length, int gfp_mask);
+#endif
+
+/**
+ *	dev_alloc_skb - allocate an skbuff for sending
+ *	@length: length to allocate
+ *
+ *	Allocate a new &sk_buff and assign it a usage count of one. The
+ *	buffer has unspecified headroom built in. Users should allocate
+ *	the headroom they think they need without accounting for the
+ *	built in space. The built in space is used for optimisations.
+ *
+ *	%NULL is returned in there is no free memory. Although this function
+ *	allocates memory it can be called from an interrupt.
+ */
+static inline struct sk_buff *dev_alloc_skb(unsigned int length)
+{
+	return __dev_alloc_skb(length, GFP_ATOMIC);
+}
+
+/**
+ *	skb_cow - copy header of skb when it is required
+ *	@skb: buffer to cow
+ *	@headroom: needed headroom
+ *
+ *	If the skb passed lacks sufficient headroom or its data part
+ *	is shared, data is reallocated. If reallocation fails, an error
+ *	is returned and original skb is not changed.
+ *
+ *	The result is skb with writable area skb->head...skb->tail
+ *	and at least @headroom of space at head.
+ */
+static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
+{
+	int delta = (headroom > 16 ? headroom : 16) - skb_headroom(skb);
+
+	if (delta < 0)
+		delta = 0;
+
+	if (delta || skb_cloned(skb))
+		return pskb_expand_head(skb, (delta + 15) & ~15, 0, GFP_ATOMIC);
+	return 0;
+}
+
+/**
+ *	skb_padto	- pad an skbuff up to a minimal size
+ *	@skb: buffer to pad
+ *	@len: minimal length
+ *
+ *	Pads up a buffer to ensure the trailing bytes exist and are
+ *	blanked. If the buffer already contains sufficient data it
+ *	is untouched. Returns the buffer, which may be a replacement
+ *	for the original, or NULL for out of memory - in which case
+ *	the original buffer is still freed.
+ */
+ 
+static inline struct sk_buff *skb_padto(struct sk_buff *skb, unsigned int len)
+{
+	unsigned int size = skb->len;
+	if (likely(size >= len))
+		return skb;
+	return skb_pad(skb, len-size);
+}
+
+static inline int skb_add_data(struct sk_buff *skb,
+			       char __user *from, int copy)
+{
+	const int off = skb->len;
+
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		unsigned int csum = csum_and_copy_from_user(from,
+							    skb_put(skb, copy),
+							    copy, 0, &err);
+		if (!err) {
+			skb->csum = csum_block_add(skb->csum, csum, off);
+			return 0;
+		}
+	} else if (!copy_from_user(skb_put(skb, copy), from, copy))
+		return 0;
+
+	__skb_trim(skb, off);
+	return -EFAULT;
+}
+
+static inline int skb_can_coalesce(struct sk_buff *skb, int i,
+				   struct page *page, int off)
+{
+	if (i) {
+		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
+
+		return page == frag->page &&
+		       off == frag->page_offset + frag->size;
+	}
+	return 0;
+}
+
+/**
+ *	skb_linearize - convert paged skb to linear one
+ *	@skb: buffer to linarize
+ *	@gfp: allocation mode
+ *
+ *	If there is no free memory -ENOMEM is returned, otherwise zero
+ *	is returned and the old skb data released.
+ */
+extern int __skb_linearize(struct sk_buff *skb, int gfp);
+static inline int skb_linearize(struct sk_buff *skb, int gfp)
+{
+	return __skb_linearize(skb, gfp);
+}
+
+/**
+ *	skb_postpull_rcsum - update checksum for received skb after pull
+ *	@skb: buffer to update
+ *	@start: start of data before pull
+ *	@len: length of data pulled
+ *
+ *	After doing a pull on a received packet, you need to call this to
+ *	update the CHECKSUM_HW checksum, or set ip_summed to CHECKSUM_NONE
+ *	so that it can be recomputed from scratch.
+ */
+
+static inline void skb_postpull_rcsum(struct sk_buff *skb,
+					 const void *start, int len)
+{
+	if (skb->ip_summed == CHECKSUM_HW)
+		skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0));
+}
+
+/**
+ *	pskb_trim_rcsum - trim received skb and update checksum
+ *	@skb: buffer to trim
+ *	@len: new length
+ *
+ *	This is exactly the same as pskb_trim except that it ensures the
+ *	checksum of received packets are still valid after the operation.
+ */
+
+static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
+{
+	if (len >= skb->len)
+		return 0;
+	if (skb->ip_summed == CHECKSUM_HW)
+		skb->ip_summed = CHECKSUM_NONE;
+	return __pskb_trim(skb, len);
+}
+
+static inline void *kmap_skb_frag(const skb_frag_t *frag)
+{
+#ifdef CONFIG_HIGHMEM
+	BUG_ON(in_irq());
+
+	local_bh_disable();
+#endif
+	return kmap_atomic(frag->page, KM_SKB_DATA_SOFTIRQ);
+}
+
+static inline void kunmap_skb_frag(void *vaddr)
+{
+	kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
+#ifdef CONFIG_HIGHMEM
+	local_bh_enable();
+#endif
+}
+
+#define skb_queue_walk(queue, skb) \
+		for (skb = (queue)->next;					\
+		     prefetch(skb->next), (skb != (struct sk_buff *)(queue));	\
+		     skb = skb->next)
+
+
+extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
+					 int noblock, int *err);
+extern unsigned int    datagram_poll(struct file *file, struct socket *sock,
+				     struct poll_table_struct *wait);
+extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
+					       int offset, struct iovec *to,
+					       int size);
+extern int	       skb_copy_and_csum_datagram_iovec(const
+							struct sk_buff *skb,
+							int hlen,
+							struct iovec *iov);
+extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
+extern unsigned int    skb_checksum(const struct sk_buff *skb, int offset,
+				    int len, unsigned int csum);
+extern int	       skb_copy_bits(const struct sk_buff *skb, int offset,
+				     void *to, int len);
+extern unsigned int    skb_copy_and_csum_bits(const struct sk_buff *skb,
+					      int offset, u8 *to, int len,
+					      unsigned int csum);
+extern void	       skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
+extern void	       skb_split(struct sk_buff *skb,
+				 struct sk_buff *skb1, const u32 len);
+
+static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
+				       int len, void *buffer)
+{
+	int hlen = skb_headlen(skb);
+
+	if (offset + len <= hlen)
+		return skb->data + offset;
+
+	if (skb_copy_bits(skb, offset, buffer, len) < 0)
+		return NULL;
+
+	return buffer;
+}
+
+extern void skb_init(void);
+extern void skb_add_mtu(int mtu);
+
+#ifdef CONFIG_NETFILTER
+static inline void nf_conntrack_put(struct nf_conntrack *nfct)
+{
+	if (nfct && atomic_dec_and_test(&nfct->use))
+		nfct->destroy(nfct);
+}
+static inline void nf_conntrack_get(struct nf_conntrack *nfct)
+{
+	if (nfct)
+		atomic_inc(&nfct->use);
+}
+static inline void nf_reset(struct sk_buff *skb)
+{
+	nf_conntrack_put(skb->nfct);
+	skb->nfct = NULL;
+#ifdef CONFIG_NETFILTER_DEBUG
+	skb->nf_debug = 0;
+#endif
+}
+static inline void nf_reset_debug(struct sk_buff *skb)
+{
+#ifdef CONFIG_NETFILTER_DEBUG
+	skb->nf_debug = 0;
+#endif
+}
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
+{
+	if (nf_bridge && atomic_dec_and_test(&nf_bridge->use))
+		kfree(nf_bridge);
+}
+static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge)
+{
+	if (nf_bridge)
+		atomic_inc(&nf_bridge->use);
+}
+#endif /* CONFIG_BRIDGE_NETFILTER */
+#else /* CONFIG_NETFILTER */
+static inline void nf_reset(struct sk_buff *skb) {}
+#endif /* CONFIG_NETFILTER */
+
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_SKBUFF_H */
diff --git a/include/linux/slab.h b/include/linux/slab.h
new file mode 100644
index 000000000000..3e3c3ab8ff94
--- /dev/null
+++ b/include/linux/slab.h
@@ -0,0 +1,129 @@
+/*
+ * linux/mm/slab.h
+ * Written by Mark Hemment, 1996.
+ * (markhe@nextd.demon.co.uk)
+ */
+
+#ifndef _LINUX_SLAB_H
+#define	_LINUX_SLAB_H
+
+#if	defined(__KERNEL__)
+
+typedef struct kmem_cache_s kmem_cache_t;
+
+#include	<linux/config.h>	/* kmalloc_sizes.h needs CONFIG_ options */
+#include	<linux/gfp.h>
+#include	<linux/init.h>
+#include	<linux/types.h>
+#include	<asm/page.h>		/* kmalloc_sizes.h needs PAGE_SIZE */
+#include	<asm/cache.h>		/* kmalloc_sizes.h needs L1_CACHE_BYTES */
+
+/* flags for kmem_cache_alloc() */
+#define	SLAB_NOFS		GFP_NOFS
+#define	SLAB_NOIO		GFP_NOIO
+#define	SLAB_ATOMIC		GFP_ATOMIC
+#define	SLAB_USER		GFP_USER
+#define	SLAB_KERNEL		GFP_KERNEL
+#define	SLAB_DMA		GFP_DMA
+
+#define SLAB_LEVEL_MASK		GFP_LEVEL_MASK
+
+#define	SLAB_NO_GROW		__GFP_NO_GROW	/* don't grow a cache */
+
+/* flags to pass to kmem_cache_create().
+ * The first 3 are only valid when the allocator as been build
+ * SLAB_DEBUG_SUPPORT.
+ */
+#define	SLAB_DEBUG_FREE		0x00000100UL	/* Peform (expensive) checks on free */
+#define	SLAB_DEBUG_INITIAL	0x00000200UL	/* Call constructor (as verifier) */
+#define	SLAB_RED_ZONE		0x00000400UL	/* Red zone objs in a cache */
+#define	SLAB_POISON		0x00000800UL	/* Poison objects */
+#define	SLAB_NO_REAP		0x00001000UL	/* never reap from the cache */
+#define	SLAB_HWCACHE_ALIGN	0x00002000UL	/* align objs on a h/w cache lines */
+#define SLAB_CACHE_DMA		0x00004000UL	/* use GFP_DMA memory */
+#define SLAB_MUST_HWCACHE_ALIGN	0x00008000UL	/* force alignment */
+#define SLAB_STORE_USER		0x00010000UL	/* store the last owner for bug hunting */
+#define SLAB_RECLAIM_ACCOUNT	0x00020000UL	/* track pages allocated to indicate
+						   what is reclaimable later*/
+#define SLAB_PANIC		0x00040000UL	/* panic if kmem_cache_create() fails */
+#define SLAB_DESTROY_BY_RCU	0x00080000UL	/* defer freeing pages to RCU */
+
+/* flags passed to a constructor func */
+#define	SLAB_CTOR_CONSTRUCTOR	0x001UL		/* if not set, then deconstructor */
+#define SLAB_CTOR_ATOMIC	0x002UL		/* tell constructor it can't sleep */
+#define	SLAB_CTOR_VERIFY	0x004UL		/* tell constructor it's a verify call */
+
+/* prototypes */
+extern void __init kmem_cache_init(void);
+
+extern kmem_cache_t *kmem_cache_create(const char *, size_t, size_t, unsigned long,
+				       void (*)(void *, kmem_cache_t *, unsigned long),
+				       void (*)(void *, kmem_cache_t *, unsigned long));
+extern int kmem_cache_destroy(kmem_cache_t *);
+extern int kmem_cache_shrink(kmem_cache_t *);
+extern void *kmem_cache_alloc(kmem_cache_t *, unsigned int __nocast);
+#ifdef CONFIG_NUMA
+extern void *kmem_cache_alloc_node(kmem_cache_t *, int);
+#else
+static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, int node)
+{
+	return kmem_cache_alloc(cachep, GFP_KERNEL);
+}
+#endif
+extern void kmem_cache_free(kmem_cache_t *, void *);
+extern unsigned int kmem_cache_size(kmem_cache_t *);
+
+/* Size description struct for general caches. */
+struct cache_sizes {
+	size_t		 cs_size;
+	kmem_cache_t	*cs_cachep;
+	kmem_cache_t	*cs_dmacachep;
+};
+extern struct cache_sizes malloc_sizes[];
+extern void *__kmalloc(size_t, unsigned int __nocast);
+
+static inline void *kmalloc(size_t size, unsigned int __nocast flags)
+{
+	if (__builtin_constant_p(size)) {
+		int i = 0;
+#define CACHE(x) \
+		if (size <= x) \
+			goto found; \
+		else \
+			i++;
+#include "kmalloc_sizes.h"
+#undef CACHE
+		{
+			extern void __you_cannot_kmalloc_that_much(void);
+			__you_cannot_kmalloc_that_much();
+		}
+found:
+		return kmem_cache_alloc((flags & GFP_DMA) ?
+			malloc_sizes[i].cs_dmacachep :
+			malloc_sizes[i].cs_cachep, flags);
+	}
+	return __kmalloc(size, flags);
+}
+
+extern void *kcalloc(size_t, size_t, unsigned int __nocast);
+extern void kfree(const void *);
+extern unsigned int ksize(const void *);
+
+extern int FASTCALL(kmem_cache_reap(int));
+extern int FASTCALL(kmem_ptr_validate(kmem_cache_t *cachep, void *ptr));
+
+/* System wide caches */
+extern kmem_cache_t	*vm_area_cachep;
+extern kmem_cache_t	*names_cachep;
+extern kmem_cache_t	*files_cachep;
+extern kmem_cache_t	*filp_cachep;
+extern kmem_cache_t	*fs_cachep;
+extern kmem_cache_t	*signal_cachep;
+extern kmem_cache_t	*sighand_cachep;
+extern kmem_cache_t	*bio_cachep;
+
+extern atomic_t slab_reclaim_pages;
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/smb.h b/include/linux/smb.h
new file mode 100644
index 000000000000..b0162208c963
--- /dev/null
+++ b/include/linux/smb.h
@@ -0,0 +1,117 @@
+/*
+ *  smb.h
+ *
+ *  Copyright (C) 1995, 1996 by Paal-Kr. Engstad and Volker Lendecke
+ *  Copyright (C) 1997 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_SMB_H
+#define _LINUX_SMB_H
+
+#include <linux/types.h>
+
+enum smb_protocol { 
+	SMB_PROTOCOL_NONE, 
+	SMB_PROTOCOL_CORE, 
+	SMB_PROTOCOL_COREPLUS, 
+	SMB_PROTOCOL_LANMAN1, 
+	SMB_PROTOCOL_LANMAN2, 
+	SMB_PROTOCOL_NT1 
+};
+
+enum smb_case_hndl {
+	SMB_CASE_DEFAULT,
+	SMB_CASE_LOWER,
+	SMB_CASE_UPPER
+};
+
+struct smb_dskattr {
+        __u16 total;
+        __u16 allocblocks;
+        __u16 blocksize;
+        __u16 free;
+};
+
+struct smb_conn_opt {
+
+        /* The socket */
+	unsigned int fd;
+
+	enum smb_protocol protocol;
+	enum smb_case_hndl case_handling;
+
+	/* Connection-Options */
+
+	__u32              max_xmit;
+	__u16              server_uid;
+	__u16              tid;
+
+        /* The following are LANMAN 1.0 options */
+        __u16              secmode;
+        __u16              maxmux;
+        __u16              maxvcs;
+        __u16              rawmode;
+        __u32              sesskey;
+
+	/* The following are NT LM 0.12 options */
+	__u32              maxraw;
+	__u32              capabilities;
+	__s16              serverzone;
+};
+
+#ifdef __KERNEL__
+
+#define SMB_NLS_MAXNAMELEN 20
+struct smb_nls_codepage {
+	char local_name[SMB_NLS_MAXNAMELEN];
+	char remote_name[SMB_NLS_MAXNAMELEN];
+};
+
+
+#define SMB_MAXNAMELEN 255
+#define SMB_MAXPATHLEN 1024
+
+/*
+ * Contains all relevant data on a SMB networked file.
+ */
+struct smb_fattr {
+	__u16 attr;
+
+	unsigned long	f_ino;
+	umode_t		f_mode;
+	nlink_t		f_nlink;
+	uid_t		f_uid;
+	gid_t		f_gid;
+	dev_t		f_rdev;
+	loff_t		f_size;
+	struct timespec	f_atime;
+	struct timespec f_mtime;
+	struct timespec f_ctime;
+	unsigned long	f_blksize;
+	unsigned long	f_blocks;
+	int		f_unix;
+};
+
+enum smb_conn_state {
+	CONN_VALID,		/* everything's fine */
+	CONN_INVALID,		/* Something went wrong, but did not
+				   try to reconnect yet. */
+	CONN_RETRIED,		/* Tried a reconnection, but was refused */
+	CONN_RETRYING		/* Currently trying to reconnect */
+};
+
+#define SMB_SUPER_MAGIC               0x517B
+
+#define SMB_HEADER_LEN   37     /* includes everything up to, but not
+                                 * including smb_bcc */
+
+#define SMB_INITIAL_PACKET_SIZE		4000
+#define SMB_MAX_PACKET_SIZE		32768
+
+/* reserve this much space for trans2 parameters. Shouldn't have to be more
+   than 10 or so, but OS/2 seems happier like this. */
+#define SMB_TRANS2_MAX_PARAM 64
+
+#endif
+#endif
diff --git a/include/linux/smb_fs.h b/include/linux/smb_fs.h
new file mode 100644
index 000000000000..c4153120ade6
--- /dev/null
+++ b/include/linux/smb_fs.h
@@ -0,0 +1,204 @@
+/*
+ *  smb_fs.h
+ *
+ *  Copyright (C) 1995 by Paal-Kr. Engstad and Volker Lendecke
+ *  Copyright (C) 1997 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_SMB_FS_H
+#define _LINUX_SMB_FS_H
+
+#include <linux/smb.h>
+#include <linux/smb_fs_i.h>
+#include <linux/smb_fs_sb.h>
+
+/*
+ * ioctl commands
+ */
+#define	SMB_IOC_GETMOUNTUID		_IOR('u', 1, __kernel_old_uid_t)
+#define SMB_IOC_NEWCONN                 _IOW('u', 2, struct smb_conn_opt)
+
+/* __kernel_uid_t can never change, so we have to use __kernel_uid32_t */
+#define	SMB_IOC_GETMOUNTUID32		_IOR('u', 3, __kernel_uid32_t)
+
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/pagemap.h>
+#include <linux/vmalloc.h>
+#include <linux/smb_mount.h>
+#include <asm/unaligned.h>
+
+static inline struct smb_sb_info *SMB_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct smb_inode_info *SMB_I(struct inode *inode)
+{
+	return container_of(inode, struct smb_inode_info, vfs_inode);
+}
+
+/* macro names are short for word, double-word, long value (?) */
+#define WVAL(buf,pos) \
+	(le16_to_cpu(get_unaligned((u16 *)((u8 *)(buf) + (pos)))))
+#define DVAL(buf,pos) \
+	(le32_to_cpu(get_unaligned((u32 *)((u8 *)(buf) + (pos)))))
+#define LVAL(buf,pos) \
+	(le64_to_cpu(get_unaligned((u64 *)((u8 *)(buf) + (pos)))))
+#define WSET(buf,pos,val) \
+	put_unaligned(cpu_to_le16((u16)(val)), (u16 *)((u8 *)(buf) + (pos)))
+#define DSET(buf,pos,val) \
+	put_unaligned(cpu_to_le32((u32)(val)), (u32 *)((u8 *)(buf) + (pos)))
+#define LSET(buf,pos,val) \
+	put_unaligned(cpu_to_le64((u64)(val)), (u64 *)((u8 *)(buf) + (pos)))
+
+/* where to find the base of the SMB packet proper */
+#define smb_base(buf) ((u8 *)(((u8 *)(buf))+4))
+
+#ifdef DEBUG_SMB_MALLOC
+
+#include <linux/slab.h>
+
+extern int smb_malloced;
+extern int smb_current_vmalloced;
+extern int smb_current_kmalloced;
+
+static inline void *
+smb_vmalloc(unsigned int size)
+{
+        smb_malloced += 1;
+        smb_current_vmalloced += 1;
+        return vmalloc(size);
+}
+
+static inline void
+smb_vfree(void *obj)
+{
+        smb_current_vmalloced -= 1;
+        vfree(obj);
+}
+
+static inline void *
+smb_kmalloc(size_t size, int flags)
+{
+	smb_malloced += 1;
+	smb_current_kmalloced += 1;
+	return kmalloc(size, flags);
+}
+
+static inline void
+smb_kfree(void *obj)
+{
+	smb_current_kmalloced -= 1;
+	kfree(obj);
+}
+
+#else /* DEBUG_SMB_MALLOC */
+
+#define smb_kmalloc(s,p)	kmalloc(s,p)
+#define smb_kfree(o)		kfree(o)
+#define smb_vmalloc(s)		vmalloc(s)
+#define smb_vfree(o)		vfree(o)
+
+#endif /* DEBUG_SMB_MALLOC */
+
+/*
+ * Flags for the in-memory inode
+ */
+#define SMB_F_LOCALWRITE	0x02	/* file modified locally */
+
+
+/* NT1 protocol capability bits */
+#define SMB_CAP_RAW_MODE         0x00000001
+#define SMB_CAP_MPX_MODE         0x00000002
+#define SMB_CAP_UNICODE          0x00000004
+#define SMB_CAP_LARGE_FILES      0x00000008
+#define SMB_CAP_NT_SMBS          0x00000010
+#define SMB_CAP_RPC_REMOTE_APIS  0x00000020
+#define SMB_CAP_STATUS32         0x00000040
+#define SMB_CAP_LEVEL_II_OPLOCKS 0x00000080
+#define SMB_CAP_LOCK_AND_READ    0x00000100
+#define SMB_CAP_NT_FIND          0x00000200
+#define SMB_CAP_DFS              0x00001000
+#define SMB_CAP_LARGE_READX      0x00004000
+#define SMB_CAP_LARGE_WRITEX     0x00008000
+#define SMB_CAP_UNIX             0x00800000	/* unofficial ... */
+
+
+/*
+ * This is the time we allow an inode, dentry or dir cache to live. It is bad
+ * for performance to have shorter ttl on an inode than on the cache. It can
+ * cause refresh on each inode for a dir listing ... one-by-one
+ */
+#define SMB_MAX_AGE(server) (((server)->mnt->ttl * HZ) / 1000)
+
+static inline void
+smb_age_dentry(struct smb_sb_info *server, struct dentry *dentry)
+{
+	dentry->d_time = jiffies - SMB_MAX_AGE(server);
+}
+
+struct smb_cache_head {
+	time_t		mtime;	/* unused */
+	unsigned long	time;	/* cache age */
+	unsigned long	end;	/* last valid fpos in cache */
+	int		eof;
+};
+
+#define SMB_DIRCACHE_SIZE	((int)(PAGE_CACHE_SIZE/sizeof(struct dentry *)))
+union smb_dir_cache {
+	struct smb_cache_head   head;
+	struct dentry           *dentry[SMB_DIRCACHE_SIZE];
+};
+
+#define SMB_FIRSTCACHE_SIZE	((int)((SMB_DIRCACHE_SIZE * \
+	sizeof(struct dentry *) - sizeof(struct smb_cache_head)) / \
+	sizeof(struct dentry *)))
+
+#define SMB_DIRCACHE_START      (SMB_DIRCACHE_SIZE - SMB_FIRSTCACHE_SIZE)
+
+struct smb_cache_control {
+	struct  smb_cache_head		head;
+	struct  page			*page;
+	union   smb_dir_cache		*cache;
+	unsigned long			fpos, ofs;
+	int				filled, valid, idx;
+};
+
+#define SMB_OPS_NUM_STATIC	5
+struct smb_ops {
+	int (*read)(struct inode *inode, loff_t offset, int count,
+		    char *data);
+	int (*write)(struct inode *inode, loff_t offset, int count, const
+		     char *data);
+	int (*readdir)(struct file *filp, void *dirent, filldir_t filldir,
+		       struct smb_cache_control *ctl);
+
+	int (*getattr)(struct smb_sb_info *server, struct dentry *dir,
+		       struct smb_fattr *fattr);
+	/* int (*setattr)(...); */      /* setattr is really icky! */
+
+	int (*truncate)(struct inode *inode, loff_t length);
+
+
+	/* --- --- --- end of "static" entries --- --- --- */
+
+	int (*convert)(unsigned char *output, int olen,
+		       const unsigned char *input, int ilen,
+		       struct nls_table *nls_from,
+		       struct nls_table *nls_to);
+};
+
+static inline int
+smb_is_open(struct inode *i)
+{
+	return (SMB_I(i)->open == server_from_inode(i)->generation);
+}
+
+extern void smb_install_null_ops(struct smb_ops *);
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SMB_FS_H */
diff --git a/include/linux/smb_fs_i.h b/include/linux/smb_fs_i.h
new file mode 100644
index 000000000000..8516954a5141
--- /dev/null
+++ b/include/linux/smb_fs_i.h
@@ -0,0 +1,39 @@
+/*
+ *  smb_fs_i.h
+ *
+ *  Copyright (C) 1995 by Paal-Kr. Engstad and Volker Lendecke
+ *  Copyright (C) 1997 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_SMB_FS_I
+#define _LINUX_SMB_FS_I
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/fs.h>
+
+/*
+ * smb fs inode data (in memory only)
+ */
+struct smb_inode_info {
+
+	/*
+	 * file handles are local to a connection. A file is open if
+	 * (open == generation).
+	 */
+        unsigned int open;	/* open generation */
+	__u16 fileid;		/* What id to handle a file with? */
+	__u16 attr;		/* Attribute fields, DOS value */
+
+	__u16 access;		/* Access mode */
+	__u16 flags;
+	unsigned long oldmtime;	/* last time refreshed */
+	unsigned long closed;	/* timestamp when closed */
+	unsigned openers;	/* number of fileid users */
+
+	struct inode vfs_inode;	/* must be at the end */
+};
+
+#endif
+#endif
diff --git a/include/linux/smb_fs_sb.h b/include/linux/smb_fs_sb.h
new file mode 100644
index 000000000000..5b4ae2cc445c
--- /dev/null
+++ b/include/linux/smb_fs_sb.h
@@ -0,0 +1,101 @@
+/*
+ *  smb_fs_sb.h
+ *
+ *  Copyright (C) 1995 by Paal-Kr. Engstad and Volker Lendecke
+ *  Copyright (C) 1997 by Volker Lendecke
+ *
+ */
+
+#ifndef _SMB_FS_SB
+#define _SMB_FS_SB
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/smb.h>
+
+/*
+ * Upper limit on the total number of active smb_request structs.
+ */
+#define MAX_REQUEST_HARD       256
+
+enum smb_receive_state {
+	SMB_RECV_START,		/* No data read, looking for length + sig */
+	SMB_RECV_HEADER,	/* Reading the header data */
+	SMB_RECV_HCOMPLETE,	/* Done with the header */
+	SMB_RECV_PARAM,		/* Reading parameter words */
+	SMB_RECV_DATA,		/* Reading data bytes */
+	SMB_RECV_END,		/* End of request */
+	SMB_RECV_DROP,		/* Dropping this SMB */
+	SMB_RECV_REQUEST,	/* Received a request and not a reply */
+};
+
+/* structure access macros */
+#define server_from_inode(inode) SMB_SB((inode)->i_sb)
+#define server_from_dentry(dentry) SMB_SB((dentry)->d_sb)
+#define SB_of(server) ((server)->super_block)
+
+struct smb_sb_info {
+	/* List of all smbfs superblocks */
+	struct list_head entry;
+
+        enum smb_conn_state state;
+	struct file * sock_file;
+	int conn_error;
+	enum smb_receive_state rstate;
+
+	atomic_t nr_requests;
+	struct list_head xmitq;
+	struct list_head recvq;
+	u16 mid;
+
+        struct smb_mount_data_kernel *mnt;
+
+	/* Connections are counted. Each time a new socket arrives,
+	 * generation is incremented.
+	 */
+	unsigned int generation;
+	pid_t conn_pid;
+	struct smb_conn_opt opt;
+	wait_queue_head_t conn_wq;
+	int conn_complete;
+	struct semaphore sem;
+
+	unsigned char      header[SMB_HEADER_LEN + 20*2 + 2];
+	u32                header_len;
+	u32                smb_len;
+	u32                smb_read;
+
+        /* We use our own data_ready callback, but need the original one */
+        void *data_ready;
+
+	/* nls pointers for codepage conversions */
+	struct nls_table *remote_nls;
+	struct nls_table *local_nls;
+
+	struct smb_ops *ops;
+
+	struct super_block *super_block;
+};
+
+static inline int
+smb_lock_server_interruptible(struct smb_sb_info *server)
+{
+	return down_interruptible(&(server->sem));
+}
+
+static inline void
+smb_lock_server(struct smb_sb_info *server)
+{
+	down(&(server->sem));
+}
+
+static inline void
+smb_unlock_server(struct smb_sb_info *server)
+{
+	up(&(server->sem));
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/smb_mount.h b/include/linux/smb_mount.h
new file mode 100644
index 000000000000..d10f00cb5703
--- /dev/null
+++ b/include/linux/smb_mount.h
@@ -0,0 +1,65 @@
+/*
+ *  smb_mount.h
+ *
+ *  Copyright (C) 1995, 1996 by Paal-Kr. Engstad and Volker Lendecke
+ *  Copyright (C) 1997 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_SMB_MOUNT_H
+#define _LINUX_SMB_MOUNT_H
+
+#include <linux/types.h>
+
+#define SMB_MOUNT_VERSION	6
+
+struct smb_mount_data {
+	int version;
+	__kernel_uid_t mounted_uid; /* Who may umount() this filesystem? */
+	__kernel_uid_t uid;
+	__kernel_gid_t gid;
+	__kernel_mode_t file_mode;
+	__kernel_mode_t dir_mode;
+};
+
+
+#ifdef __KERNEL__
+
+/* "vers" in big-endian */
+#define SMB_MOUNT_ASCII 0x76657273
+
+#define SMB_MOUNT_OLDVERSION	6
+#undef SMB_MOUNT_VERSION
+#define SMB_MOUNT_VERSION	7
+
+/* flags */
+#define SMB_MOUNT_WIN95		0x0001	/* Win 95 server */
+#define SMB_MOUNT_OLDATTR	0x0002	/* Use core getattr (Win 95 speedup) */
+#define SMB_MOUNT_DIRATTR	0x0004	/* Use find_first for getattr */
+#define SMB_MOUNT_CASE		0x0008	/* Be case sensitive */
+#define SMB_MOUNT_UNICODE	0x0010	/* Server talks unicode */
+#define SMB_MOUNT_UID		0x0020  /* Use user specified uid */
+#define SMB_MOUNT_GID		0x0040  /* Use user specified gid */
+#define SMB_MOUNT_FMODE		0x0080  /* Use user specified file mode */
+#define SMB_MOUNT_DMODE		0x0100  /* Use user specified dir mode */
+
+struct smb_mount_data_kernel {
+	int version;
+
+	uid_t mounted_uid;	/* Who may umount() this filesystem? */
+	uid_t uid;
+	gid_t gid;
+	mode_t file_mode;
+	mode_t dir_mode;
+
+	u32 flags;
+
+        /* maximum age in jiffies (inode, dentry and dircache) */
+	int ttl;
+
+	struct smb_nls_codepage codepage;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/smbno.h b/include/linux/smbno.h
new file mode 100644
index 000000000000..f99e02d9ffe2
--- /dev/null
+++ b/include/linux/smbno.h
@@ -0,0 +1,363 @@
+#ifndef _SMBNO_H_
+#define _SMBNO_H_
+
+/* these define the attribute byte as seen by DOS */
+#define aRONLY	(1L<<0)
+#define aHIDDEN	(1L<<1)
+#define aSYSTEM	(1L<<2)
+#define aVOLID	(1L<<3)
+#define aDIR	(1L<<4)
+#define aARCH	(1L<<5)
+
+/* error classes */
+#define SUCCESS 0  /* The request was successful. */
+#define ERRDOS 0x01 /*  Error is from the core DOS operating system set. */
+#define ERRSRV 0x02 /* Error is generated by the server network file manager.*/
+#define ERRHRD 0x03  /* Error is an hardware error. */
+#define ERRCMD 0xFF  /* Command was not in the "SMB" format. */
+
+/* SMB X/Open error codes for the ERRdos error class */
+
+#define ERRbadfunc 1            /* Invalid function (or system call) */
+#define ERRbadfile 2            /* File not found (pathname error) */
+#define ERRbadpath 3            /* Directory not found */
+#define ERRnofids 4             /* Too many open files */
+#define ERRnoaccess 5           /* Access denied */
+#define ERRbadfid 6             /* Invalid fid */
+#define ERRbadmcb 7             /* Memory control blocks destroyed */
+#define ERRnomem 8              /* Out of memory */
+#define ERRbadmem 9             /* Invalid memory block address */
+#define ERRbadenv 10            /* Invalid environment */
+#define ERRbadformat 11         /* Invalid format */
+#define ERRbadaccess 12         /* Invalid open mode */
+#define ERRbaddata 13           /* Invalid data (only from ioctl call) */
+#define ERRres 14               /* reserved */
+#define ERRbaddrive 15          /* Invalid drive */
+#define ERRremcd 16             /* Attempt to delete current directory */
+#define ERRdiffdevice 17        /* rename/move across different filesystems */
+#define ERRnofiles 18           /* no more files found in file search */
+#define ERRbadshare 32          /* Share mode on file conflict with open mode */
+#define ERRlock 33              /* Lock request conflicts with existing lock */
+#define ERRfilexists 80         /* File in operation already exists */
+#define ERRbadpipe 230          /* Named pipe invalid */
+#define ERRpipebusy 231         /* All instances of pipe are busy */
+#define ERRpipeclosing 232      /* named pipe close in progress */
+#define ERRnotconnected 233     /* No process on other end of named pipe */
+#define ERRmoredata 234         /* More data to be returned */
+
+#define ERROR_INVALID_PARAMETER	 87
+#define ERROR_DISK_FULL		112
+#define ERROR_INVALID_NAME	123
+#define ERROR_DIR_NOT_EMPTY	145
+#define ERROR_NOT_LOCKED	158
+#define ERROR_ALREADY_EXISTS	183  /* see also 80 ? */
+#define ERROR_EAS_DIDNT_FIT	275 /* Extended attributes didn't fit */
+#define ERROR_EAS_NOT_SUPPORTED	282 /* Extended attributes not supported */
+
+/* Error codes for the ERRSRV class */
+
+#define ERRerror 1              /* Non specific error code */
+#define ERRbadpw 2              /* Bad password */
+#define ERRbadtype 3            /* reserved */
+#define ERRaccess 4          /* No permissions to do the requested operation */
+#define ERRinvnid 5             /* tid invalid */
+#define ERRinvnetname 6         /* Invalid servername */
+#define ERRinvdevice 7          /* Invalid device */
+#define ERRqfull 49             /* Print queue full */
+#define ERRqtoobig 50           /* Queued item too big */
+#define ERRinvpfid 52           /* Invalid print file in smb_fid */
+#define ERRsmbcmd 64            /* Unrecognised command */
+#define ERRsrverror 65          /* smb server internal error */
+#define ERRfilespecs 67         /* fid and pathname invalid combination */
+#define ERRbadlink 68           /* reserved */
+#define ERRbadpermits 69        /* Access specified for a file is not valid */
+#define ERRbadpid 70            /* reserved */
+#define ERRsetattrmode 71       /* attribute mode invalid */
+#define ERRpaused 81            /* Message server paused */
+#define ERRmsgoff 82            /* Not receiving messages */
+#define ERRnoroom 83            /* No room for message */
+#define ERRrmuns 87             /* too many remote usernames */
+#define ERRtimeout 88           /* operation timed out */
+#define ERRnoresource  89   /* No resources currently available for request. */
+#define ERRtoomanyuids 90       /* too many userids */
+#define ERRbaduid 91            /* bad userid */
+#define ERRuseMPX 250    /* temporarily unable to use raw mode, use MPX mode */
+#define ERRuseSTD 251    /* temporarily unable to use raw mode, use std.mode */
+#define ERRcontMPX 252          /* resume MPX mode */
+#define ERRbadPW                /* reserved */
+#define ERRnosupport 0xFFFF
+
+/* Error codes for the ERRHRD class */
+
+#define ERRnowrite 19           /* read only media */
+#define ERRbadunit 20           /* Unknown device */
+#define ERRnotready 21          /* Drive not ready */
+#define ERRbadcmd 22            /* Unknown command */
+#define ERRdata 23              /* Data (CRC) error */
+#define ERRbadreq 24            /* Bad request structure length */
+#define ERRseek 25
+#define ERRbadmedia 26
+#define ERRbadsector 27
+#define ERRnopaper 28
+#define ERRwrite 29             /* write fault */
+#define ERRread 30              /* read fault */
+#define ERRgeneral 31           /* General hardware failure */
+#define ERRwrongdisk 34
+#define ERRFCBunavail 35
+#define ERRsharebufexc 36       /* share buffer exceeded */
+#define ERRdiskfull 39
+
+/*
+ * Access modes when opening a file
+ */
+#define SMB_ACCMASK	0x0003
+#define SMB_O_RDONLY	0x0000
+#define SMB_O_WRONLY	0x0001
+#define SMB_O_RDWR	0x0002
+
+/* offsets into message for common items */
+#define smb_com 8
+#define smb_rcls 9
+#define smb_reh 10
+#define smb_err 11
+#define smb_flg 13
+#define smb_flg2 14
+#define smb_reb 13
+#define smb_tid 28
+#define smb_pid 30
+#define smb_uid 32
+#define smb_mid 34
+#define smb_wct 36
+#define smb_vwv 37
+#define smb_vwv0 37
+#define smb_vwv1 39
+#define smb_vwv2 41
+#define smb_vwv3 43
+#define smb_vwv4 45
+#define smb_vwv5 47
+#define smb_vwv6 49
+#define smb_vwv7 51
+#define smb_vwv8 53
+#define smb_vwv9 55
+#define smb_vwv10 57
+#define smb_vwv11 59
+#define smb_vwv12 61
+#define smb_vwv13 63
+#define smb_vwv14 65
+
+/* these are the trans2 sub fields for primary requests */
+#define smb_tpscnt smb_vwv0
+#define smb_tdscnt smb_vwv1
+#define smb_mprcnt smb_vwv2
+#define smb_mdrcnt smb_vwv3
+#define smb_msrcnt smb_vwv4
+#define smb_flags smb_vwv5
+#define smb_timeout smb_vwv6
+#define smb_pscnt smb_vwv9
+#define smb_psoff smb_vwv10
+#define smb_dscnt smb_vwv11
+#define smb_dsoff smb_vwv12
+#define smb_suwcnt smb_vwv13
+#define smb_setup smb_vwv14
+#define smb_setup0 smb_setup
+#define smb_setup1 (smb_setup+2)
+#define smb_setup2 (smb_setup+4)
+
+/* these are for the secondary requests */
+#define smb_spscnt smb_vwv2
+#define smb_spsoff smb_vwv3
+#define smb_spsdisp smb_vwv4
+#define smb_sdscnt smb_vwv5
+#define smb_sdsoff smb_vwv6
+#define smb_sdsdisp smb_vwv7
+#define smb_sfid smb_vwv8
+
+/* and these for responses */
+#define smb_tprcnt smb_vwv0
+#define smb_tdrcnt smb_vwv1
+#define smb_prcnt smb_vwv3
+#define smb_proff smb_vwv4
+#define smb_prdisp smb_vwv5
+#define smb_drcnt smb_vwv6
+#define smb_droff smb_vwv7
+#define smb_drdisp smb_vwv8
+
+/* the complete */
+#define SMBmkdir      0x00   /* create directory */
+#define SMBrmdir      0x01   /* delete directory */
+#define SMBopen       0x02   /* open file */
+#define SMBcreate     0x03   /* create file */
+#define SMBclose      0x04   /* close file */
+#define SMBflush      0x05   /* flush file */
+#define SMBunlink     0x06   /* delete file */
+#define SMBmv         0x07   /* rename file */
+#define SMBgetatr     0x08   /* get file attributes */
+#define SMBsetatr     0x09   /* set file attributes */
+#define SMBread       0x0A   /* read from file */
+#define SMBwrite      0x0B   /* write to file */
+#define SMBlock       0x0C   /* lock byte range */
+#define SMBunlock     0x0D   /* unlock byte range */
+#define SMBctemp      0x0E   /* create temporary file */
+#define SMBmknew      0x0F   /* make new file */
+#define SMBchkpth     0x10   /* check directory path */
+#define SMBexit       0x11   /* process exit */
+#define SMBlseek      0x12   /* seek */
+#define SMBtcon       0x70   /* tree connect */
+#define SMBtconX      0x75   /* tree connect and X*/
+#define SMBtdis       0x71   /* tree disconnect */
+#define SMBnegprot    0x72   /* negotiate protocol */
+#define SMBdskattr    0x80   /* get disk attributes */
+#define SMBsearch     0x81   /* search directory */
+#define SMBsplopen    0xC0   /* open print spool file */
+#define SMBsplwr      0xC1   /* write to print spool file */
+#define SMBsplclose   0xC2   /* close print spool file */
+#define SMBsplretq    0xC3   /* return print queue */
+#define SMBsends      0xD0   /* send single block message */
+#define SMBsendb      0xD1   /* send broadcast message */
+#define SMBfwdname    0xD2   /* forward user name */
+#define SMBcancelf    0xD3   /* cancel forward */
+#define SMBgetmac     0xD4   /* get machine name */
+#define SMBsendstrt   0xD5   /* send start of multi-block message */
+#define SMBsendend    0xD6   /* send end of multi-block message */
+#define SMBsendtxt    0xD7   /* send text of multi-block message */
+
+/* Core+ protocol */
+#define SMBlockread	  0x13   /* Lock a range and read */
+#define SMBwriteunlock 0x14 /* Unlock a range then write */
+#define SMBreadbraw   0x1a  /* read a block of data with no smb header */
+#define SMBwritebraw  0x1d  /* write a block of data with no smb header */
+#define SMBwritec     0x20  /* secondary write request */
+#define SMBwriteclose 0x2c  /* write a file then close it */
+
+/* dos extended protocol */
+#define SMBreadBraw      0x1A   /* read block raw */
+#define SMBreadBmpx      0x1B   /* read block multiplexed */
+#define SMBreadBs        0x1C   /* read block (secondary response) */
+#define SMBwriteBraw     0x1D   /* write block raw */
+#define SMBwriteBmpx     0x1E   /* write block multiplexed */
+#define SMBwriteBs       0x1F   /* write block (secondary request) */
+#define SMBwriteC        0x20   /* write complete response */
+#define SMBsetattrE      0x22   /* set file attributes expanded */
+#define SMBgetattrE      0x23   /* get file attributes expanded */
+#define SMBlockingX      0x24   /* lock/unlock byte ranges and X */
+#define SMBtrans         0x25   /* transaction - name, bytes in/out */
+#define SMBtranss        0x26   /* transaction (secondary request/response) */
+#define SMBioctl         0x27   /* IOCTL */
+#define SMBioctls        0x28   /* IOCTL  (secondary request/response) */
+#define SMBcopy          0x29   /* copy */
+#define SMBmove          0x2A   /* move */
+#define SMBecho          0x2B   /* echo */
+#define SMBopenX         0x2D   /* open and X */
+#define SMBreadX         0x2E   /* read and X */
+#define SMBwriteX        0x2F   /* write and X */
+#define SMBsesssetupX    0x73   /* Session Set Up & X (including User Logon) */
+#define SMBtconX         0x75   /* tree connect and X */
+#define SMBffirst        0x82   /* find first */
+#define SMBfunique       0x83   /* find unique */
+#define SMBfclose        0x84   /* find close */
+#define SMBinvalid       0xFE   /* invalid command */
+
+
+/* Extended 2.0 protocol */
+#define SMBtrans2        0x32   /* TRANS2 protocol set */
+#define SMBtranss2       0x33   /* TRANS2 protocol set, secondary command */
+#define SMBfindclose     0x34   /* Terminate a TRANSACT2_FINDFIRST */
+#define SMBfindnclose    0x35   /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
+#define SMBulogoffX      0x74   /* user logoff */
+
+/* these are the TRANS2 sub commands */
+#define TRANSACT2_OPEN          0
+#define TRANSACT2_FINDFIRST     1
+#define TRANSACT2_FINDNEXT      2
+#define TRANSACT2_QFSINFO       3
+#define TRANSACT2_SETFSINFO     4
+#define TRANSACT2_QPATHINFO     5
+#define TRANSACT2_SETPATHINFO   6
+#define TRANSACT2_QFILEINFO     7
+#define TRANSACT2_SETFILEINFO   8
+#define TRANSACT2_FSCTL         9
+#define TRANSACT2_IOCTL           10
+#define TRANSACT2_FINDNOTIFYFIRST 11
+#define TRANSACT2_FINDNOTIFYNEXT  12
+#define TRANSACT2_MKDIR           13
+
+/* Information Levels -  Shared? */
+#define SMB_INFO_STANDARD		1
+#define SMB_INFO_QUERY_EA_SIZE		2
+#define SMB_INFO_QUERY_EAS_FROM_LIST	3
+#define SMB_INFO_QUERY_ALL_EAS		4
+#define SMB_INFO_IS_NAME_VALID		6
+
+/* Information Levels -  TRANSACT2_FINDFIRST */
+#define SMB_FIND_FILE_DIRECTORY_INFO		0x101
+#define SMB_FIND_FILE_FULL_DIRECTORY_INFO	0x102
+#define SMB_FIND_FILE_NAMES_INFO		0x103
+#define SMB_FIND_FILE_BOTH_DIRECTORY_INFO	0x104
+
+/* Information Levels -  TRANSACT2_QPATHINFO */
+#define SMB_QUERY_FILE_BASIC_INFO	0x101
+#define SMB_QUERY_FILE_STANDARD_INFO	0x102
+#define SMB_QUERY_FILE_EA_INFO		0x103
+#define SMB_QUERY_FILE_NAME_INFO	0x104
+#define SMB_QUERY_FILE_ALL_INFO		0x107
+#define SMB_QUERY_FILE_ALT_NAME_INFO	0x108
+#define SMB_QUERY_FILE_STREAM_INFO	0x109
+#define SMB_QUERY_FILE_COMPRESSION_INFO	0x10b
+
+/* Information Levels - TRANSACT2_SETFILEINFO */
+#define SMB_SET_FILE_BASIC_INFO		0x101
+#define SMB_SET_FILE_DISPOSITION_INFO	0x102
+#define SMB_SET_FILE_ALLOCATION_INFO	0x103
+#define SMB_SET_FILE_END_OF_FILE_INFO	0x104
+
+/* smb_flg field flags */
+#define SMB_FLAGS_SUPPORT_LOCKREAD	0x01
+#define SMB_FLAGS_CLIENT_BUF_AVAIL	0x02
+#define SMB_FLAGS_RESERVED		0x04
+#define SMB_FLAGS_CASELESS_PATHNAMES	0x08
+#define SMB_FLAGS_CANONICAL_PATHNAMES	0x10
+#define SMB_FLAGS_REQUEST_OPLOCK	0x20
+#define SMB_FLAGS_REQUEST_BATCH_OPLOCK	0x40
+#define SMB_FLAGS_REPLY			0x80
+
+/* smb_flg2 field flags (samba-2.2.0/source/include/smb.h) */
+#define SMB_FLAGS2_LONG_PATH_COMPONENTS		0x0001
+#define SMB_FLAGS2_EXTENDED_ATTRIBUTES		0x0002
+#define SMB_FLAGS2_DFS_PATHNAMES		0x1000
+#define SMB_FLAGS2_READ_PERMIT_NO_EXECUTE	0x2000
+#define SMB_FLAGS2_32_BIT_ERROR_CODES		0x4000 
+#define SMB_FLAGS2_UNICODE_STRINGS		0x8000
+
+
+/*
+ * UNIX stuff  (from samba trans2.h)
+ */
+#define MIN_UNIX_INFO_LEVEL		0x200
+#define MAX_UNIX_INFO_LEVEL		0x2FF
+#define SMB_FIND_FILE_UNIX		0x202
+#define SMB_QUERY_FILE_UNIX_BASIC	0x200
+#define SMB_QUERY_FILE_UNIX_LINK	0x201
+#define SMB_QUERY_FILE_UNIX_HLINK	0x202
+#define SMB_SET_FILE_UNIX_BASIC		0x200
+#define SMB_SET_FILE_UNIX_LINK		0x201
+#define SMB_SET_FILE_UNIX_HLINK		0x203
+#define SMB_QUERY_CIFS_UNIX_INFO	0x200
+
+/* values which means "don't change it" */
+#define SMB_MODE_NO_CHANGE		0xFFFFFFFF
+#define SMB_UID_NO_CHANGE		0xFFFFFFFF
+#define SMB_GID_NO_CHANGE		0xFFFFFFFF
+#define SMB_TIME_NO_CHANGE		0xFFFFFFFFFFFFFFFFULL
+#define SMB_SIZE_NO_CHANGE		0xFFFFFFFFFFFFFFFFULL
+
+/* UNIX filetype mappings. */
+#define UNIX_TYPE_FILE		0
+#define UNIX_TYPE_DIR		1
+#define UNIX_TYPE_SYMLINK	2
+#define UNIX_TYPE_CHARDEV	3
+#define UNIX_TYPE_BLKDEV	4
+#define UNIX_TYPE_FIFO		5
+#define UNIX_TYPE_SOCKET	6
+#define UNIX_TYPE_UNKNOWN	0xFFFFFFFF
+
+#endif /* _SMBNO_H_ */
diff --git a/include/linux/smp.h b/include/linux/smp.h
new file mode 100644
index 000000000000..dcf1db3b35d3
--- /dev/null
+++ b/include/linux/smp.h
@@ -0,0 +1,139 @@
+#ifndef __LINUX_SMP_H
+#define __LINUX_SMP_H
+
+/*
+ *	Generic SMP support
+ *		Alan Cox. <alan@redhat.com>
+ */
+
+#include <linux/config.h>
+
+extern void cpu_idle(void);
+
+#ifdef CONFIG_SMP
+
+#include <linux/preempt.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <asm/smp.h>
+#include <asm/bug.h>
+
+/*
+ * main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
+ * (defined in asm header):
+ */ 
+
+/*
+ * stops all CPUs but the current one:
+ */
+extern void smp_send_stop(void);
+
+/*
+ * sends a 'reschedule' event to another CPU:
+ */
+extern void smp_send_reschedule(int cpu);
+
+
+/*
+ * Prepare machine for booting other CPUs.
+ */
+extern void smp_prepare_cpus(unsigned int max_cpus);
+
+/*
+ * Bring a CPU up
+ */
+extern int __cpu_up(unsigned int cpunum);
+
+/*
+ * Final polishing of CPUs
+ */
+extern void smp_cpus_done(unsigned int max_cpus);
+
+/*
+ * Call a function on all other processors
+ */
+extern int smp_call_function (void (*func) (void *info), void *info,
+			      int retry, int wait);
+
+/*
+ * Call a function on all processors
+ */
+static inline int on_each_cpu(void (*func) (void *info), void *info,
+			      int retry, int wait)
+{
+	int ret = 0;
+
+	preempt_disable();
+	ret = smp_call_function(func, info, retry, wait);
+	func(info);
+	preempt_enable();
+	return ret;
+}
+
+#define MSG_ALL_BUT_SELF	0x8000	/* Assume <32768 CPU's */
+#define MSG_ALL			0x8001
+
+#define MSG_INVALIDATE_TLB	0x0001	/* Remote processor TLB invalidate */
+#define MSG_STOP_CPU		0x0002	/* Sent to shut down slave CPU's
+					 * when rebooting
+					 */
+#define MSG_RESCHEDULE		0x0003	/* Reschedule request from master CPU*/
+#define MSG_CALL_FUNCTION       0x0004  /* Call function on all other CPUs */
+
+/*
+ * Mark the boot cpu "online" so that it can call console drivers in
+ * printk() and can access its per-cpu storage.
+ */
+void smp_prepare_boot_cpu(void);
+
+#else /* !SMP */
+
+/*
+ *	These macros fold the SMP functionality into a single CPU system
+ */
+
+#if !defined(__smp_processor_id) || !defined(CONFIG_PREEMPT)
+# define smp_processor_id()			0
+#endif
+#define hard_smp_processor_id()			0
+#define smp_call_function(func,info,retry,wait)	({ 0; })
+#define on_each_cpu(func,info,retry,wait)	({ func(info); 0; })
+static inline void smp_send_reschedule(int cpu) { }
+#define num_booting_cpus()			1
+#define smp_prepare_boot_cpu()			do {} while (0)
+
+#endif /* !SMP */
+
+/*
+ * DEBUG_PREEMPT support: check whether smp_processor_id() is being
+ * used in a preemption-safe way.
+ *
+ * An architecture has to enable this debugging code explicitly.
+ * It can do so by renaming the smp_processor_id() macro to
+ * __smp_processor_id().  This should only be done after some minimal
+ * testing, because usually there are a number of false positives
+ * that an architecture will trigger.
+ *
+ * To fix a false positive (i.e. smp_processor_id() use that the
+ * debugging code reports but which use for some reason is legal),
+ * change the smp_processor_id() reference to _smp_processor_id(),
+ * which is the nondebug variant.  NOTE: don't use this to hack around
+ * real bugs.
+ */
+#ifdef __smp_processor_id
+# if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT)
+   extern unsigned int smp_processor_id(void);
+# else
+#  define smp_processor_id() __smp_processor_id()
+# endif
+# define _smp_processor_id() __smp_processor_id()
+#else
+# define _smp_processor_id() smp_processor_id()
+#endif
+
+#define get_cpu()		({ preempt_disable(); smp_processor_id(); })
+#define put_cpu()		preempt_enable()
+#define put_cpu_no_resched()	preempt_enable_no_resched()
+
+#endif /* __LINUX_SMP_H */
diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h
new file mode 100644
index 000000000000..b63ce7014093
--- /dev/null
+++ b/include/linux/smp_lock.h
@@ -0,0 +1,54 @@
+#ifndef __LINUX_SMPLOCK_H
+#define __LINUX_SMPLOCK_H
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_LOCK_KERNEL
+
+#define kernel_locked()		(current->lock_depth >= 0)
+
+extern int __lockfunc __reacquire_kernel_lock(void);
+extern void __lockfunc __release_kernel_lock(void);
+
+/*
+ * Release/re-acquire global kernel lock for the scheduler
+ */
+#define release_kernel_lock(tsk) do { 		\
+	if (unlikely((tsk)->lock_depth >= 0))	\
+		__release_kernel_lock();	\
+} while (0)
+
+/*
+ * Non-SMP kernels will never block on the kernel lock,
+ * so we are better off returning a constant zero from
+ * reacquire_kernel_lock() so that the compiler can see
+ * it at compile-time.
+ */
+#if defined(CONFIG_SMP) && !defined(CONFIG_PREEMPT_BKL)
+# define return_value_on_smp return
+#else
+# define return_value_on_smp
+#endif
+
+static inline int reacquire_kernel_lock(struct task_struct *task)
+{
+	if (unlikely(task->lock_depth >= 0))
+		return_value_on_smp __reacquire_kernel_lock();
+	return 0;
+}
+
+extern void __lockfunc lock_kernel(void)	__acquires(kernel_lock);
+extern void __lockfunc unlock_kernel(void)	__releases(kernel_lock);
+
+#else
+
+#define lock_kernel()				do { } while(0)
+#define unlock_kernel()				do { } while(0)
+#define release_kernel_lock(task)		do { } while(0)
+#define reacquire_kernel_lock(task)		0
+#define kernel_locked()				1
+
+#endif /* CONFIG_LOCK_KERNEL */
+#endif /* __LINUX_SMPLOCK_H */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
new file mode 100644
index 000000000000..4db25d5c7cd1
--- /dev/null
+++ b/include/linux/snmp.h
@@ -0,0 +1,266 @@
+/*
+ * Definitions for MIBs
+ *
+ * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+ */
+
+#ifndef _LINUX_SNMP_H
+#define _LINUX_SNMP_H
+
+/* ipstats mib definitions */
+/*
+ * RFC 1213:  MIB-II
+ * RFC 2011 (updates 1213):  SNMPv2-MIB-IP
+ * RFC 2863:  Interfaces Group MIB
+ * RFC 2465:  IPv6 MIB: General Group
+ * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
+ */
+enum
+{
+	IPSTATS_MIB_NUM = 0,
+	IPSTATS_MIB_INRECEIVES,			/* InReceives */
+	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
+	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
+	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
+	IPSTATS_MIB_INADDRERRORS,		/* InAddrErrors */
+	IPSTATS_MIB_INUNKNOWNPROTOS,		/* InUnknownProtos */
+	IPSTATS_MIB_INTRUNCATEDPKTS,		/* InTruncatedPkts */
+	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
+	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
+	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
+	IPSTATS_MIB_OUTREQUESTS,		/* OutRequests */
+	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
+	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
+	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
+	IPSTATS_MIB_REASMREQDS,			/* ReasmReqds */
+	IPSTATS_MIB_REASMOKS,			/* ReasmOKs */
+	IPSTATS_MIB_REASMFAILS,			/* ReasmFails */
+	IPSTATS_MIB_FRAGOKS,			/* FragOKs */
+	IPSTATS_MIB_FRAGFAILS,			/* FragFails */
+	IPSTATS_MIB_FRAGCREATES,		/* FragCreates */
+	IPSTATS_MIB_INMCASTPKTS,		/* InMcastPkts */
+	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
+	__IPSTATS_MIB_MAX
+};
+
+/* icmp mib definitions */
+/*
+ * RFC 1213:  MIB-II ICMP Group
+ * RFC 2011 (updates 1213):  SNMPv2 MIB for IP: ICMP group
+ */
+enum
+{
+	ICMP_MIB_NUM = 0,
+	ICMP_MIB_INMSGS,			/* InMsgs */
+	ICMP_MIB_INERRORS,			/* InErrors */
+	ICMP_MIB_INDESTUNREACHS,		/* InDestUnreachs */
+	ICMP_MIB_INTIMEEXCDS,			/* InTimeExcds */
+	ICMP_MIB_INPARMPROBS,			/* InParmProbs */
+	ICMP_MIB_INSRCQUENCHS,			/* InSrcQuenchs */
+	ICMP_MIB_INREDIRECTS,			/* InRedirects */
+	ICMP_MIB_INECHOS,			/* InEchos */
+	ICMP_MIB_INECHOREPS,			/* InEchoReps */
+	ICMP_MIB_INTIMESTAMPS,			/* InTimestamps */
+	ICMP_MIB_INTIMESTAMPREPS,		/* InTimestampReps */
+	ICMP_MIB_INADDRMASKS,			/* InAddrMasks */
+	ICMP_MIB_INADDRMASKREPS,		/* InAddrMaskReps */
+	ICMP_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP_MIB_OUTERRORS,			/* OutErrors */
+	ICMP_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
+	ICMP_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
+	ICMP_MIB_OUTPARMPROBS,			/* OutParmProbs */
+	ICMP_MIB_OUTSRCQUENCHS,			/* OutSrcQuenchs */
+	ICMP_MIB_OUTREDIRECTS,			/* OutRedirects */
+	ICMP_MIB_OUTECHOS,			/* OutEchos */
+	ICMP_MIB_OUTECHOREPS,			/* OutEchoReps */
+	ICMP_MIB_OUTTIMESTAMPS,			/* OutTimestamps */
+	ICMP_MIB_OUTTIMESTAMPREPS,		/* OutTimestampReps */
+	ICMP_MIB_OUTADDRMASKS,			/* OutAddrMasks */
+	ICMP_MIB_OUTADDRMASKREPS,		/* OutAddrMaskReps */
+	__ICMP_MIB_MAX
+};
+
+/* icmp6 mib definitions */
+/*
+ * RFC 2466:  ICMPv6-MIB
+ */
+enum
+{
+	ICMP6_MIB_NUM = 0,
+	ICMP6_MIB_INMSGS,			/* InMsgs */
+	ICMP6_MIB_INERRORS,			/* InErrors */
+	ICMP6_MIB_INDESTUNREACHS,		/* InDestUnreachs */
+	ICMP6_MIB_INPKTTOOBIGS,			/* InPktTooBigs */
+	ICMP6_MIB_INTIMEEXCDS,			/* InTimeExcds */
+	ICMP6_MIB_INPARMPROBLEMS,		/* InParmProblems */
+	ICMP6_MIB_INECHOS,			/* InEchos */
+	ICMP6_MIB_INECHOREPLIES,		/* InEchoReplies */
+	ICMP6_MIB_INGROUPMEMBQUERIES,		/* InGroupMembQueries */
+	ICMP6_MIB_INGROUPMEMBRESPONSES,		/* InGroupMembResponses */
+	ICMP6_MIB_INGROUPMEMBREDUCTIONS,	/* InGroupMembReductions */
+	ICMP6_MIB_INROUTERSOLICITS,		/* InRouterSolicits */
+	ICMP6_MIB_INROUTERADVERTISEMENTS,	/* InRouterAdvertisements */
+	ICMP6_MIB_INNEIGHBORSOLICITS,		/* InNeighborSolicits */
+	ICMP6_MIB_INNEIGHBORADVERTISEMENTS,	/* InNeighborAdvertisements */
+	ICMP6_MIB_INREDIRECTS,			/* InRedirects */
+	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP6_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
+	ICMP6_MIB_OUTPKTTOOBIGS,		/* OutPktTooBigs */
+	ICMP6_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
+	ICMP6_MIB_OUTPARMPROBLEMS,		/* OutParmProblems */
+	ICMP6_MIB_OUTECHOREPLIES,		/* OutEchoReplies */
+	ICMP6_MIB_OUTROUTERSOLICITS,		/* OutRouterSolicits */
+	ICMP6_MIB_OUTNEIGHBORSOLICITS,		/* OutNeighborSolicits */
+	ICMP6_MIB_OUTNEIGHBORADVERTISEMENTS,	/* OutNeighborAdvertisements */
+	ICMP6_MIB_OUTREDIRECTS,			/* OutRedirects */
+	ICMP6_MIB_OUTGROUPMEMBRESPONSES,	/* OutGroupMembResponses */
+	ICMP6_MIB_OUTGROUPMEMBREDUCTIONS,	/* OutGroupMembReductions */
+	__ICMP6_MIB_MAX
+};
+
+/* tcp mib definitions */
+/*
+ * RFC 1213:  MIB-II TCP group
+ * RFC 2012 (updates 1213):  SNMPv2-MIB-TCP
+ */
+enum
+{
+	TCP_MIB_NUM = 0,
+	TCP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
+	TCP_MIB_RTOMIN,				/* RtoMin */
+	TCP_MIB_RTOMAX,				/* RtoMax */
+	TCP_MIB_MAXCONN,			/* MaxConn */
+	TCP_MIB_ACTIVEOPENS,			/* ActiveOpens */
+	TCP_MIB_PASSIVEOPENS,			/* PassiveOpens */
+	TCP_MIB_ATTEMPTFAILS,			/* AttemptFails */
+	TCP_MIB_ESTABRESETS,			/* EstabResets */
+	TCP_MIB_CURRESTAB,			/* CurrEstab */
+	TCP_MIB_INSEGS,				/* InSegs */
+	TCP_MIB_OUTSEGS,			/* OutSegs */
+	TCP_MIB_RETRANSSEGS,			/* RetransSegs */
+	TCP_MIB_INERRS,				/* InErrs */
+	TCP_MIB_OUTRSTS,			/* OutRsts */
+	__TCP_MIB_MAX
+};
+
+/* udp mib definitions */
+/*
+ * RFC 1213:  MIB-II UDP group
+ * RFC 2013 (updates 1213):  SNMPv2-MIB-UDP
+ */
+enum
+{
+	UDP_MIB_NUM = 0,
+	UDP_MIB_INDATAGRAMS,			/* InDatagrams */
+	UDP_MIB_NOPORTS,			/* NoPorts */
+	UDP_MIB_INERRORS,			/* InErrors */
+	UDP_MIB_OUTDATAGRAMS,			/* OutDatagrams */
+	__UDP_MIB_MAX
+};
+
+/* sctp mib definitions */
+/*
+ * draft-ietf-sigtran-sctp-mib-07.txt
+ */
+enum
+{
+	SCTP_MIB_NUM = 0,
+	SCTP_MIB_CURRESTAB,			/* CurrEstab */
+	SCTP_MIB_ACTIVEESTABS,			/* ActiveEstabs */
+	SCTP_MIB_PASSIVEESTABS,			/* PassiveEstabs */
+	SCTP_MIB_ABORTEDS,			/* Aborteds */
+	SCTP_MIB_SHUTDOWNS,			/* Shutdowns */
+	SCTP_MIB_OUTOFBLUES,			/* OutOfBlues */
+	SCTP_MIB_CHECKSUMERRORS,		/* ChecksumErrors */
+	SCTP_MIB_OUTCTRLCHUNKS,			/* OutCtrlChunks */
+	SCTP_MIB_OUTORDERCHUNKS,		/* OutOrderChunks */
+	SCTP_MIB_OUTUNORDERCHUNKS,		/* OutUnorderChunks */
+	SCTP_MIB_INCTRLCHUNKS,			/* InCtrlChunks */
+	SCTP_MIB_INORDERCHUNKS,			/* InOrderChunks */
+	SCTP_MIB_INUNORDERCHUNKS,		/* InUnorderChunks */
+	SCTP_MIB_FRAGUSRMSGS,			/* FragUsrMsgs */
+	SCTP_MIB_REASMUSRMSGS,			/* ReasmUsrMsgs */
+	SCTP_MIB_OUTSCTPPACKS,			/* OutSCTPPacks */
+	SCTP_MIB_INSCTPPACKS,			/* InSCTPPacks */
+	SCTP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
+	SCTP_MIB_RTOMIN,			/* RtoMin */
+	SCTP_MIB_RTOMAX,			/* RtoMax */
+	SCTP_MIB_RTOINITIAL,			/* RtoInitial */
+	SCTP_MIB_VALCOOKIELIFE,			/* ValCookieLife */
+	SCTP_MIB_MAXINITRETR,			/* MaxInitRetr */
+	__SCTP_MIB_MAX
+};
+
+/* linux mib definitions */
+enum
+{
+	LINUX_MIB_NUM = 0,
+	LINUX_MIB_SYNCOOKIESSENT,		/* SyncookiesSent */
+	LINUX_MIB_SYNCOOKIESRECV,		/* SyncookiesRecv */
+	LINUX_MIB_SYNCOOKIESFAILED,		/* SyncookiesFailed */
+	LINUX_MIB_EMBRYONICRSTS,		/* EmbryonicRsts */
+	LINUX_MIB_PRUNECALLED,			/* PruneCalled */
+	LINUX_MIB_RCVPRUNED,			/* RcvPruned */
+	LINUX_MIB_OFOPRUNED,			/* OfoPruned */
+	LINUX_MIB_OUTOFWINDOWICMPS,		/* OutOfWindowIcmps */
+	LINUX_MIB_LOCKDROPPEDICMPS,		/* LockDroppedIcmps */
+	LINUX_MIB_ARPFILTER,			/* ArpFilter */
+	LINUX_MIB_TIMEWAITED,			/* TimeWaited */
+	LINUX_MIB_TIMEWAITRECYCLED,		/* TimeWaitRecycled */
+	LINUX_MIB_TIMEWAITKILLED,		/* TimeWaitKilled */
+	LINUX_MIB_PAWSPASSIVEREJECTED,		/* PAWSPassiveRejected */
+	LINUX_MIB_PAWSACTIVEREJECTED,		/* PAWSActiveRejected */
+	LINUX_MIB_PAWSESTABREJECTED,		/* PAWSEstabRejected */
+	LINUX_MIB_DELAYEDACKS,			/* DelayedACKs */
+	LINUX_MIB_DELAYEDACKLOCKED,		/* DelayedACKLocked */
+	LINUX_MIB_DELAYEDACKLOST,		/* DelayedACKLost */
+	LINUX_MIB_LISTENOVERFLOWS,		/* ListenOverflows */
+	LINUX_MIB_LISTENDROPS,			/* ListenDrops */
+	LINUX_MIB_TCPPREQUEUED,			/* TCPPrequeued */
+	LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG,	/* TCPDirectCopyFromBacklog */
+	LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE,	/* TCPDirectCopyFromPrequeue */
+	LINUX_MIB_TCPPREQUEUEDROPPED,		/* TCPPrequeueDropped */
+	LINUX_MIB_TCPHPHITS,			/* TCPHPHits */
+	LINUX_MIB_TCPHPHITSTOUSER,		/* TCPHPHitsToUser */
+	LINUX_MIB_TCPPUREACKS,			/* TCPPureAcks */
+	LINUX_MIB_TCPHPACKS,			/* TCPHPAcks */
+	LINUX_MIB_TCPRENORECOVERY,		/* TCPRenoRecovery */
+	LINUX_MIB_TCPSACKRECOVERY,		/* TCPSackRecovery */
+	LINUX_MIB_TCPSACKRENEGING,		/* TCPSACKReneging */
+	LINUX_MIB_TCPFACKREORDER,		/* TCPFACKReorder */
+	LINUX_MIB_TCPSACKREORDER,		/* TCPSACKReorder */
+	LINUX_MIB_TCPRENOREORDER,		/* TCPRenoReorder */
+	LINUX_MIB_TCPTSREORDER,			/* TCPTSReorder */
+	LINUX_MIB_TCPFULLUNDO,			/* TCPFullUndo */
+	LINUX_MIB_TCPPARTIALUNDO,		/* TCPPartialUndo */
+	LINUX_MIB_TCPDSACKUNDO,			/* TCPDSACKUndo */
+	LINUX_MIB_TCPLOSSUNDO,			/* TCPLossUndo */
+	LINUX_MIB_TCPLOSS,			/* TCPLoss */
+	LINUX_MIB_TCPLOSTRETRANSMIT,		/* TCPLostRetransmit */
+	LINUX_MIB_TCPRENOFAILURES,		/* TCPRenoFailures */
+	LINUX_MIB_TCPSACKFAILURES,		/* TCPSackFailures */
+	LINUX_MIB_TCPLOSSFAILURES,		/* TCPLossFailures */
+	LINUX_MIB_TCPFASTRETRANS,		/* TCPFastRetrans */
+	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
+	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
+	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
+	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
+	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
+	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
+	LINUX_MIB_TCPRCVCOLLAPSED,		/* TCPRcvCollapsed */
+	LINUX_MIB_TCPDSACKOLDSENT,		/* TCPDSACKOldSent */
+	LINUX_MIB_TCPDSACKOFOSENT,		/* TCPDSACKOfoSent */
+	LINUX_MIB_TCPDSACKRECV,			/* TCPDSACKRecv */
+	LINUX_MIB_TCPDSACKOFORECV,		/* TCPDSACKOfoRecv */
+	LINUX_MIB_TCPABORTONSYN,		/* TCPAbortOnSyn */
+	LINUX_MIB_TCPABORTONDATA,		/* TCPAbortOnData */
+	LINUX_MIB_TCPABORTONCLOSE,		/* TCPAbortOnClose */
+	LINUX_MIB_TCPABORTONMEMORY,		/* TCPAbortOnMemory */
+	LINUX_MIB_TCPABORTONTIMEOUT,		/* TCPAbortOnTimeout */
+	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
+	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
+	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
+	__LINUX_MIB_MAX
+};
+
+#endif	/* _LINUX_SNMP_H */
diff --git a/include/linux/socket.h b/include/linux/socket.h
new file mode 100644
index 000000000000..a5c7d96e4d2e
--- /dev/null
+++ b/include/linux/socket.h
@@ -0,0 +1,295 @@
+#ifndef _LINUX_SOCKET_H
+#define _LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
+#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
+				/* Implementation specific desired alignment */
+
+struct __kernel_sockaddr_storage {
+	unsigned short	ss_family;		/* address family */
+	/* Following field(s) are implementation specific */
+	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+				/* space to achieve desired size, */
+				/* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#include <linux/config.h>		/* for CONFIG_COMPAT */
+#include <linux/linkage.h>
+#include <asm/socket.h>			/* arch-dependent defines	*/
+#include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
+#include <linux/uio.h>			/* iovec support		*/
+#include <linux/types.h>		/* pid_t			*/
+#include <linux/compiler.h>		/* __user			*/
+
+typedef unsigned short	sa_family_t;
+
+/*
+ *	1003.1g requires sa_family_t and that sa_data is char.
+ */
+ 
+struct sockaddr {
+	sa_family_t	sa_family;	/* address family, AF_xxx	*/
+	char		sa_data[14];	/* 14 bytes of protocol address	*/
+};
+
+struct linger {
+	int		l_onoff;	/* Linger active		*/
+	int		l_linger;	/* How long to linger for	*/
+};
+
+#define sockaddr_storage __kernel_sockaddr_storage
+
+/*
+ *	As we do 4.4BSD message passing we use a 4.4BSD message passing
+ *	system, not 4.3. Thus msg_accrights(len) are now missing. They
+ *	belong in an obscure libc emulation or the bin.
+ */
+ 
+struct msghdr {
+	void	*	msg_name;	/* Socket name			*/
+	int		msg_namelen;	/* Length of name		*/
+	struct iovec *	msg_iov;	/* Data blocks			*/
+	__kernel_size_t	msg_iovlen;	/* Number of blocks		*/
+	void 	*	msg_control;	/* Per protocol magic (eg BSD file descriptor passing) */
+	__kernel_size_t	msg_controllen;	/* Length of cmsg list */
+	unsigned	msg_flags;
+};
+
+/*
+ *	POSIX 1003.1g - ancillary data object information
+ *	Ancillary data consits of a sequence of pairs of
+ *	(cmsghdr, cmsg_data[])
+ */
+
+struct cmsghdr {
+	__kernel_size_t	cmsg_len;	/* data byte count, including hdr */
+        int		cmsg_level;	/* originating protocol */
+        int		cmsg_type;	/* protocol-specific type */
+};
+
+/*
+ *	Ancilliary data object information MACROS
+ *	Table 5-14 of POSIX 1003.1g
+ */
+
+#define __CMSG_NXTHDR(ctl, len, cmsg) __cmsg_nxthdr((ctl),(len),(cmsg))
+#define CMSG_NXTHDR(mhdr, cmsg) cmsg_nxthdr((mhdr), (cmsg))
+
+#define CMSG_ALIGN(len) ( ((len)+sizeof(long)-1) & ~(sizeof(long)-1) )
+
+#define CMSG_DATA(cmsg)	((void *)((char *)(cmsg) + CMSG_ALIGN(sizeof(struct cmsghdr))))
+#define CMSG_SPACE(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + CMSG_ALIGN(len))
+#define CMSG_LEN(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + (len))
+
+#define __CMSG_FIRSTHDR(ctl,len) ((len) >= sizeof(struct cmsghdr) ? \
+				  (struct cmsghdr *)(ctl) : \
+				  (struct cmsghdr *)NULL)
+#define CMSG_FIRSTHDR(msg)	__CMSG_FIRSTHDR((msg)->msg_control, (msg)->msg_controllen)
+#define CMSG_OK(mhdr, cmsg) ((cmsg)->cmsg_len >= sizeof(struct cmsghdr) && \
+			     (cmsg)->cmsg_len <= (unsigned long) \
+			     ((mhdr)->msg_controllen - \
+			      ((char *)(cmsg) - (char *)(mhdr)->msg_control)))
+
+/*
+ *	This mess will go away with glibc
+ */
+ 
+#ifdef __KERNEL__
+#define __KINLINE static inline
+#elif  defined(__GNUC__) 
+#define __KINLINE static __inline__
+#elif defined(__cplusplus)
+#define __KINLINE static inline
+#else
+#define __KINLINE static
+#endif
+
+
+/*
+ *	Get the next cmsg header
+ *
+ *	PLEASE, do not touch this function. If you think, that it is
+ *	incorrect, grep kernel sources and think about consequences
+ *	before trying to improve it.
+ *
+ *	Now it always returns valid, not truncated ancillary object
+ *	HEADER. But caller still MUST check, that cmsg->cmsg_len is
+ *	inside range, given by msg->msg_controllen before using
+ *	ancillary object DATA.				--ANK (980731)
+ */
+ 
+__KINLINE struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
+					       struct cmsghdr *__cmsg)
+{
+	struct cmsghdr * __ptr;
+
+	__ptr = (struct cmsghdr*)(((unsigned char *) __cmsg) +  CMSG_ALIGN(__cmsg->cmsg_len));
+	if ((unsigned long)((char*)(__ptr+1) - (char *) __ctl) > __size)
+		return (struct cmsghdr *)0;
+
+	return __ptr;
+}
+
+__KINLINE struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
+{
+	return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
+}
+
+/* "Socket"-level control message types: */
+
+#define	SCM_RIGHTS	0x01		/* rw: access rights (array of int) */
+#define SCM_CREDENTIALS 0x02		/* rw: struct ucred		*/
+
+struct ucred {
+	__u32	pid;
+	__u32	uid;
+	__u32	gid;
+};
+
+/* Supported address families. */
+#define AF_UNSPEC	0
+#define AF_UNIX		1	/* Unix domain sockets 		*/
+#define AF_LOCAL	1	/* POSIX name for AF_UNIX	*/
+#define AF_INET		2	/* Internet IP Protocol 	*/
+#define AF_AX25		3	/* Amateur Radio AX.25 		*/
+#define AF_IPX		4	/* Novell IPX 			*/
+#define AF_APPLETALK	5	/* AppleTalk DDP 		*/
+#define AF_NETROM	6	/* Amateur Radio NET/ROM 	*/
+#define AF_BRIDGE	7	/* Multiprotocol bridge 	*/
+#define AF_ATMPVC	8	/* ATM PVCs			*/
+#define AF_X25		9	/* Reserved for X.25 project 	*/
+#define AF_INET6	10	/* IP version 6			*/
+#define AF_ROSE		11	/* Amateur Radio X.25 PLP	*/
+#define AF_DECnet	12	/* Reserved for DECnet project	*/
+#define AF_NETBEUI	13	/* Reserved for 802.2LLC project*/
+#define AF_SECURITY	14	/* Security callback pseudo AF */
+#define AF_KEY		15      /* PF_KEY key management API */
+#define AF_NETLINK	16
+#define AF_ROUTE	AF_NETLINK /* Alias to emulate 4.4BSD */
+#define AF_PACKET	17	/* Packet family		*/
+#define AF_ASH		18	/* Ash				*/
+#define AF_ECONET	19	/* Acorn Econet			*/
+#define AF_ATMSVC	20	/* ATM SVCs			*/
+#define AF_SNA		22	/* Linux SNA Project (nutters!) */
+#define AF_IRDA		23	/* IRDA sockets			*/
+#define AF_PPPOX	24	/* PPPoX sockets		*/
+#define AF_WANPIPE	25	/* Wanpipe API Sockets */
+#define AF_LLC		26	/* Linux LLC			*/
+#define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
+#define AF_MAX		32	/* For now.. */
+
+/* Protocol families, same as address families. */
+#define PF_UNSPEC	AF_UNSPEC
+#define PF_UNIX		AF_UNIX
+#define PF_LOCAL	AF_LOCAL
+#define PF_INET		AF_INET
+#define PF_AX25		AF_AX25
+#define PF_IPX		AF_IPX
+#define PF_APPLETALK	AF_APPLETALK
+#define	PF_NETROM	AF_NETROM
+#define PF_BRIDGE	AF_BRIDGE
+#define PF_ATMPVC	AF_ATMPVC
+#define PF_X25		AF_X25
+#define PF_INET6	AF_INET6
+#define PF_ROSE		AF_ROSE
+#define PF_DECnet	AF_DECnet
+#define PF_NETBEUI	AF_NETBEUI
+#define PF_SECURITY	AF_SECURITY
+#define PF_KEY		AF_KEY
+#define PF_NETLINK	AF_NETLINK
+#define PF_ROUTE	AF_ROUTE
+#define PF_PACKET	AF_PACKET
+#define PF_ASH		AF_ASH
+#define PF_ECONET	AF_ECONET
+#define PF_ATMSVC	AF_ATMSVC
+#define PF_SNA		AF_SNA
+#define PF_IRDA		AF_IRDA
+#define PF_PPPOX	AF_PPPOX
+#define PF_WANPIPE	AF_WANPIPE
+#define PF_LLC		AF_LLC
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#define PF_MAX		AF_MAX
+
+/* Maximum queue length specifiable by listen.  */
+#define SOMAXCONN	128
+
+/* Flags we can use with send/ and recv. 
+   Added those for 1003.1g not all are supported yet
+ */
+ 
+#define MSG_OOB		1
+#define MSG_PEEK	2
+#define MSG_DONTROUTE	4
+#define MSG_TRYHARD     4       /* Synonym for MSG_DONTROUTE for DECnet */
+#define MSG_CTRUNC	8
+#define MSG_PROBE	0x10	/* Do not send. Only probe path f.e. for MTU */
+#define MSG_TRUNC	0x20
+#define MSG_DONTWAIT	0x40	/* Nonblocking io		 */
+#define MSG_EOR         0x80	/* End of record */
+#define MSG_WAITALL	0x100	/* Wait for a full request */
+#define MSG_FIN         0x200
+#define MSG_SYN		0x400
+#define MSG_CONFIRM	0x800	/* Confirm path validity */
+#define MSG_RST		0x1000
+#define MSG_ERRQUEUE	0x2000	/* Fetch message from error queue */
+#define MSG_NOSIGNAL	0x4000	/* Do not generate SIGPIPE */
+#define MSG_MORE	0x8000	/* Sender will send more */
+
+#define MSG_EOF         MSG_FIN
+
+#if defined(CONFIG_COMPAT)
+#define MSG_CMSG_COMPAT	0x80000000	/* This message needs 32 bit fixups */
+#else
+#define MSG_CMSG_COMPAT	0		/* We never have 32 bit fixups */
+#endif
+
+
+/* Setsockoptions(2) level. Thanks to BSD these must match IPPROTO_xxx */
+#define SOL_IP		0
+/* #define SOL_ICMP	1	No-no-no! Due to Linux :-) we cannot use SOL_ICMP=1 */
+#define SOL_TCP		6
+#define SOL_UDP		17
+#define SOL_IPV6	41
+#define SOL_ICMPV6	58
+#define SOL_SCTP	132
+#define SOL_RAW		255
+#define SOL_IPX		256
+#define SOL_AX25	257
+#define SOL_ATALK	258
+#define SOL_NETROM	259
+#define SOL_ROSE	260
+#define SOL_DECNET	261
+#define	SOL_X25		262
+#define SOL_PACKET	263
+#define SOL_ATM		264	/* ATM layer (cell level) */
+#define SOL_AAL		265	/* ATM Adaption Layer (packet level) */
+#define SOL_IRDA        266
+#define SOL_NETBEUI	267
+#define SOL_LLC		268
+
+/* IPX options */
+#define IPX_TYPE	1
+
+#ifdef __KERNEL__
+extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, 
+				int offset, int len);
+extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
+					  struct iovec *iov, 
+					  int offset, 
+					  unsigned int len, int *csump);
+
+extern int verify_iovec(struct msghdr *m, struct iovec *iov, char *address, int mode);
+extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
+extern int move_addr_to_user(void *kaddr, int klen, void __user *uaddr, int __user *ulen);
+extern int move_addr_to_kernel(void __user *uaddr, int ulen, void *kaddr);
+extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
+
+#endif
+#endif /* not kernel and not glibc */
+#endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/linux/sockios.h
new file mode 100644
index 000000000000..5eb33205cc04
--- /dev/null
+++ b/include/linux/sockios.h
@@ -0,0 +1,143 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the socket-level I/O control calls.
+ *
+ * Version:	@(#)sockios.h	1.0.2	03/09/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_SOCKIOS_H
+#define _LINUX_SOCKIOS_H
+
+#include <asm/sockios.h>
+
+/* Linux-specific socket ioctls */
+#define SIOCINQ		FIONREAD
+#define SIOCOUTQ	TIOCOUTQ
+
+/* Routing table calls. */
+#define SIOCADDRT	0x890B		/* add routing table entry	*/
+#define SIOCDELRT	0x890C		/* delete routing table entry	*/
+#define SIOCRTMSG	0x890D		/* call to routing system	*/
+
+/* Socket configuration controls. */
+#define SIOCGIFNAME	0x8910		/* get iface name		*/
+#define SIOCSIFLINK	0x8911		/* set iface channel		*/
+#define SIOCGIFCONF	0x8912		/* get iface list		*/
+#define SIOCGIFFLAGS	0x8913		/* get flags			*/
+#define SIOCSIFFLAGS	0x8914		/* set flags			*/
+#define SIOCGIFADDR	0x8915		/* get PA address		*/
+#define SIOCSIFADDR	0x8916		/* set PA address		*/
+#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
+#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
+#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
+#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
+#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
+#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
+#define SIOCGIFMETRIC	0x891d		/* get metric			*/
+#define SIOCSIFMETRIC	0x891e		/* set metric			*/
+#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
+#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
+#define SIOCGIFMTU	0x8921		/* get MTU size			*/
+#define SIOCSIFMTU	0x8922		/* set MTU size			*/
+#define SIOCSIFNAME	0x8923		/* set interface name */
+#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
+#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
+#define SIOCSIFENCAP	0x8926		
+#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
+#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
+#define SIOCSIFSLAVE	0x8930
+#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
+#define SIOCDELMULTI	0x8932
+#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
+#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
+#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
+#define SIOCGIFPFLAGS	0x8935
+#define SIOCDIFADDR	0x8936		/* delete PA address		*/
+#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
+#define SIOCGIFCOUNT	0x8938		/* get number of devices */
+
+#define SIOCGIFBR	0x8940		/* Bridging support		*/
+#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
+
+#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
+#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
+
+#define SIOCGIFDIVERT	0x8944		/* Frame diversion support */
+#define SIOCSIFDIVERT	0x8945		/* Set frame diversion options */
+
+#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
+
+#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
+#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
+#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
+
+#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
+
+/* ARP cache control calls. */
+		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
+#define SIOCDARP	0x8953		/* delete ARP table entry	*/
+#define SIOCGARP	0x8954		/* get ARP table entry		*/
+#define SIOCSARP	0x8955		/* set ARP table entry		*/
+
+/* RARP cache control calls. */
+#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
+#define SIOCGRARP	0x8961		/* get RARP table entry		*/
+#define SIOCSRARP	0x8962		/* set RARP table entry		*/
+
+/* Driver configuration calls */
+
+#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
+#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
+
+/* DLCI configuration calls */
+
+#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
+#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
+
+#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
+#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
+
+/* bonding calls */
+
+#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
+#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
+#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
+#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
+#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
+#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
+			
+/* bridge calls */
+#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
+#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
+#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
+#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
+
+/* Device private ioctl calls */
+
+/*
+ *	These 16 ioctls are available to devices via the do_ioctl() device
+ *	vector. Each device should include this file and redefine these names
+ *	as their own. Because these are device dependent it is a good idea
+ *	_NOT_ to issue them to random objects and hope.
+ *
+ *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
+ */
+ 
+#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
+
+/*
+ *	These 16 ioctl calls are protocol private
+ */
+ 
+#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
+#endif	/* _LINUX_SOCKIOS_H */
diff --git a/include/linux/som.h b/include/linux/som.h
new file mode 100644
index 000000000000..166594e4e7be
--- /dev/null
+++ b/include/linux/som.h
@@ -0,0 +1,154 @@
+#ifndef _LINUX_SOM_H
+#define _LINUX_SOM_H
+
+/* File format definition for SOM executables / shared libraries */
+
+/* we need struct timespec */
+#include <linux/time.h>
+
+#define SOM_PAGESIZE 4096
+
+/* this is the SOM header */
+struct som_hdr {
+	short		system_id;		/* magic number - system */
+	short		a_magic;		/* magic number - file type */
+	unsigned int	version_id;		/* versiod ID: YYMMDDHH */
+	struct timespec	file_time;		/* system clock */
+	unsigned int	entry_space;		/* space for entry point */
+	unsigned int	entry_subspace;		/* subspace for entry point */
+	unsigned int	entry_offset;		/* offset of entry point */
+	unsigned int	aux_header_location;	/* auxiliary header location */
+	unsigned int	aux_header_size;	/* auxiliary header size */
+	unsigned int	som_length;		/* length of entire SOM */
+	unsigned int	presumed_dp;		/* compiler's DP value */
+	unsigned int	space_location;		/* space dictionary location */
+	unsigned int	space_total;		/* number of space entries */
+	unsigned int	subspace_location;	/* subspace entries location */
+	unsigned int	subspace_total;		/* number of subspace entries */
+	unsigned int	loader_fixup_location;	/* MPE/iX loader fixup */
+	unsigned int	loader_fixup_total;	/* number of fixup records */
+	unsigned int	space_strings_location;	/* (sub)space names */
+	unsigned int	space_strings_size;	/* size of strings area */
+	unsigned int	init_array_location;	/* reserved */
+	unsigned int	init_array_total;	/* reserved */
+	unsigned int	compiler_location;	/* module dictionary */
+	unsigned int	compiler_total;		/* number of modules */
+	unsigned int	symbol_location;	/* symbol dictionary */
+	unsigned int	symbol_total;		/* number of symbols */
+	unsigned int	fixup_request_location;	/* fixup requests */
+	unsigned int	fixup_request_total;	/* number of fixup requests */
+	unsigned int	symbol_strings_location;/* module & symbol names area */
+	unsigned int	symbol_strings_size;	/* size of strings area */
+	unsigned int	unloadable_sp_location;	/* unloadable spaces location */
+	unsigned int	unloadable_sp_size;	/* size of data */
+	unsigned int	checksum;
+};
+
+/* values for system_id */
+
+#define SOM_SID_PARISC_1_0	0x020b
+#define SOM_SID_PARISC_1_1	0x0210
+#define SOM_SID_PARISC_2_0	0x0214
+
+/* values for a_magic */
+
+#define SOM_LIB_EXEC		0x0104
+#define SOM_RELOCATABLE		0x0106
+#define SOM_EXEC_NONSHARE	0x0107
+#define SOM_EXEC_SHARE		0x0108
+#define SOM_EXEC_DEMAND		0x010B
+#define SOM_LIB_DYN		0x010D
+#define SOM_LIB_SHARE		0x010E
+#define SOM_LIB_RELOC		0x0619
+
+/* values for version_id.  Decimal not hex, yes.  Grr. */
+
+#define SOM_ID_OLD		85082112
+#define SOM_ID_NEW		87102412
+
+struct aux_id {
+	unsigned int	mandatory :1;	/* the linker must understand this */
+	unsigned int	copy	  :1;	/* Must be copied by the linker */
+	unsigned int	append	  :1;	/* Must be merged by the linker */
+	unsigned int	ignore	  :1;	/* Discard section if unknown */
+	unsigned int	reserved  :12;
+	unsigned int	type	  :16;	/* Header type */
+	unsigned int	length;		/* length of _following_ data */
+};
+
+/* The Exec Auxiliary Header.  Called The HP-UX Header within HP apparently. */
+struct som_exec_auxhdr {
+	struct aux_id	som_auxhdr;
+	int		exec_tsize;	/* Text size in bytes */
+	int		exec_tmem;	/* Address to load text at */
+	int		exec_tfile;	/* Location of text in file */
+	int		exec_dsize;	/* Data size in bytes */
+	int		exec_dmem;	/* Address to load data at */
+	int		exec_dfile;	/* Location of data in file */
+	int		exec_bsize;	/* Uninitialised data (bss) */
+	int		exec_entry;	/* Address to start executing */
+	int		exec_flags;	/* loader flags */
+	int		exec_bfill;	/* initialisation value for bss */
+};
+
+/* Oh, the things people do to avoid casts.  Shame it'll break with gcc's
+ * new aliasing rules really.
+ */
+union name_pt {
+	char *		n_name;
+	unsigned int	n_strx;
+};
+
+/* The Space Dictionary */
+struct space_dictionary_record {
+	union name_pt	name;			/* index to subspace name */
+	unsigned int	is_loadable	:1;	/* loadable */
+	unsigned int	is_defined	:1;	/* defined within file */
+	unsigned int	is_private	:1;	/* not sharable */
+	unsigned int	has_intermediate_code :1; /* contains intermediate code */
+	unsigned int	is_tspecific	:1;	/* thread specific */
+	unsigned int	reserved	:11;	/* for future expansion */
+	unsigned int	sort_key	:8;	/* for linker */
+	unsigned int	reserved2	:8;	/* for future expansion */
+
+	int		space_number;		/* index */
+	int		subspace_index;		/* index into subspace dict */
+	unsigned int	subspace_quantity;	/* number of subspaces */
+	int		loader_fix_index;	/* for loader */
+	unsigned int	loader_fix_quantity;	/* for loader */
+	int		init_pointer_index;	/* data pointer array index */
+	unsigned int	init_pointer_quantity;	/* number of data pointers */
+};
+
+/* The Subspace Dictionary */
+struct subspace_dictionary_record {
+	int		space_index;
+	unsigned int	access_control_bits :7;
+	unsigned int	memory_resident	:1;
+	unsigned int	dup_common	:1;
+	unsigned int	is_common	:1;
+	unsigned int	quadrant	:2;
+	unsigned int	initially_frozen :1;
+	unsigned int	is_first	:1;
+	unsigned int	code_only	:1;
+	unsigned int	sort_key	:8;
+	unsigned int	replicate_init	:1;
+	unsigned int	continuation	:1;
+	unsigned int	is_tspecific	:1;
+	unsigned int	is_comdat	:1;
+	unsigned int	reserved	:4;
+
+	int		file_loc_init_value;
+	unsigned int	initialization_length;
+	unsigned int	subspace_start;
+	unsigned int	subspace_length;
+
+	unsigned int	reserved2	:5;
+	unsigned int	alignment	:27;
+
+	union name_pt	name;
+	int		fixup_request_index;
+	unsigned int	fixup_request_quantity;
+};
+
+#endif /* _LINUX_SOM_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
new file mode 100644
index 000000000000..753680296e17
--- /dev/null
+++ b/include/linux/sonet.h
@@ -0,0 +1,75 @@
+/* sonet.h - SONET/SHD physical layer control */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_SONET_H
+#define LINUX_SONET_H
+
+#define __SONET_ITEMS \
+    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
+    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
+    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
+    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
+    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
+    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
+    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
+    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
+    __HANDLE_ITEM(rx_cells);		/* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+					/* get statistics */
+#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+					/* ... and zero counters */
+#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
+					/* set error insertion */
+#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
+					/* clear error insertion */
+#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
+					/* query error insertion */
+#define SONET_SETFRAMING _IO('a',ATMIOC_PHYTYP+5)
+					/* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+					/* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
+
+#define SONET_INS_SBIP	  1		/* section BIP */
+#define SONET_INS_LBIP	  2		/* line BIP */
+#define SONET_INS_PBIP	  4		/* path BIP */
+#define SONET_INS_FRAME	  8		/* out of frame */
+#define SONET_INS_LOS	 16		/* set line to zero */
+#define SONET_INS_LAIS	 32		/* line alarm indication signal */
+#define SONET_INS_PAIS	 64		/* path alarm indication signal */
+#define SONET_INS_HCS	128		/* insert HCS error */
+
+#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
+#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
+
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+
+struct k_sonet_stats {
+#define __HANDLE_ITEM(i) atomic_t i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+};
+
+extern void sonet_copy_stats(struct k_sonet_stats *from,struct sonet_stats *to);
+extern void sonet_subtract_stats(struct k_sonet_stats *from,
+    struct sonet_stats *to);
+
+#endif
+
+#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
new file mode 100644
index 000000000000..768cbba617d0
--- /dev/null
+++ b/include/linux/sonypi.h
@@ -0,0 +1,158 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _SONYPI_H_
+#define _SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_JOGDIAL_DOWN		 1
+#define SONYPI_EVENT_JOGDIAL_UP			 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED		 7
+#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
+#define SONYPI_EVENT_FNKEY_ESC			11
+#define SONYPI_EVENT_FNKEY_F1			12
+#define SONYPI_EVENT_FNKEY_F2			13
+#define SONYPI_EVENT_FNKEY_F3			14
+#define SONYPI_EVENT_FNKEY_F4			15
+#define SONYPI_EVENT_FNKEY_F5			16
+#define SONYPI_EVENT_FNKEY_F6			17
+#define SONYPI_EVENT_FNKEY_F7			18
+#define SONYPI_EVENT_FNKEY_F8			19
+#define SONYPI_EVENT_FNKEY_F9			20
+#define SONYPI_EVENT_FNKEY_F10			21
+#define SONYPI_EVENT_FNKEY_F11			22
+#define SONYPI_EVENT_FNKEY_F12			23
+#define SONYPI_EVENT_FNKEY_1			24
+#define SONYPI_EVENT_FNKEY_2			25
+#define SONYPI_EVENT_FNKEY_D			26
+#define SONYPI_EVENT_FNKEY_E			27
+#define SONYPI_EVENT_FNKEY_F			28
+#define SONYPI_EVENT_FNKEY_S			29
+#define SONYPI_EVENT_FNKEY_B			30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
+#define SONYPI_EVENT_PKEY_P1			32
+#define SONYPI_EVENT_PKEY_P2			33
+#define SONYPI_EVENT_PKEY_P3			34
+#define SONYPI_EVENT_BACK_PRESSED		35
+#define SONYPI_EVENT_LID_CLOSED			36
+#define SONYPI_EVENT_LID_OPENED			37
+#define SONYPI_EVENT_BLUETOOTH_ON		38
+#define SONYPI_EVENT_BLUETOOTH_OFF		39
+#define SONYPI_EVENT_HELP_PRESSED		40
+#define SONYPI_EVENT_FNKEY_ONLY			41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
+#define SONYPI_EVENT_ZOOM_PRESSED		50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
+#define SONYPI_EVENT_MEYE_FACE			52
+#define SONYPI_EVENT_MEYE_OPPOSITE		53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
+#define SONYPI_EVENT_BATTERY_INSERT		57
+#define SONYPI_EVENT_BATTERY_REMOVE		58
+#define SONYPI_EVENT_FNKEY_RELEASED		59
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1	0x01
+#define SONYPI_BFLAGS_B2	0x02
+#define SONYPI_BFLAGS_AC	0x04
+#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
+
+#ifdef __KERNEL__
+
+/* used only for communication between v4l and sonypi */
+
+#define SONYPI_COMMAND_GETCAMERA		 1	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERA		 2
+#define SONYPI_COMMAND_GETCAMERABRIGHTNESS	 3	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERABRIGHTNESS	 4
+#define SONYPI_COMMAND_GETCAMERACONTRAST	 5	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERACONTRAST	 6
+#define SONYPI_COMMAND_GETCAMERAHUE		 7	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAHUE		 8
+#define SONYPI_COMMAND_GETCAMERACOLOR		 9	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERACOLOR		10
+#define SONYPI_COMMAND_GETCAMERASHARPNESS	11	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERASHARPNESS	12
+#define SONYPI_COMMAND_GETCAMERAPICTURE		13	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAPICTURE		14
+#define SONYPI_COMMAND_GETCAMERAAGC		15	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAAGC		16
+#define SONYPI_COMMAND_GETCAMERADIRECTION	17	/* obsolete */
+#define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
+#define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
+
+int sonypi_camera_command(int command, u8 value);
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _SONYPI_H_ */
diff --git a/include/linux/sort.h b/include/linux/sort.h
new file mode 100644
index 000000000000..d534da2b5575
--- /dev/null
+++ b/include/linux/sort.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_SORT_H
+#define _LINUX_SORT_H
+
+#include <linux/types.h>
+
+void sort(void *base, size_t num, size_t size,
+	  int (*cmp)(const void *, const void *),
+	  void (*swap)(void *, void *, int));
+
+#endif
diff --git a/include/linux/sound.h b/include/linux/sound.h
new file mode 100644
index 000000000000..428f59794f48
--- /dev/null
+++ b/include/linux/sound.h
@@ -0,0 +1,42 @@
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL		0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
+						synthesizer and MIDI output) */
+#define SND_DEV_MIDIN		2	/* Raw midi access */
+#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED		6
+#define SND_DEV_AWFM		7	/* Reserved */
+#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI	9 */
+#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11	11
+#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
+
+/*
+ *	Sound core interface functions
+ */
+ 
+extern int register_sound_special(struct file_operations *fops, int unit);
+extern int register_sound_mixer(struct file_operations *fops, int dev);
+extern int register_sound_midi(struct file_operations *fops, int dev);
+extern int register_sound_dsp(struct file_operations *fops, int dev);
+extern int register_sound_synth(struct file_operations *fops, int dev);
+
+extern void unregister_sound_special(int unit);
+extern void unregister_sound_mixer(int unit);
+extern void unregister_sound_midi(int unit);
+extern void unregister_sound_dsp(int unit);
+extern void unregister_sound_synth(int unit);
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
new file mode 100644
index 000000000000..28d2d1881978
--- /dev/null
+++ b/include/linux/soundcard.h
@@ -0,0 +1,1298 @@
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION	0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/*
+ *	Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB		1
+#define SNDCARD_SB		2
+#define SNDCARD_PAS		3
+#define SNDCARD_GUS		4
+#define SNDCARD_MPU401		5
+#define SNDCARD_SB16		6
+#define SNDCARD_SB16MIDI	7
+#define SNDCARD_UART6850	8
+#define SNDCARD_GUS16		9
+#define SNDCARD_MSS		10
+#define SNDCARD_PSS     	11
+#define SNDCARD_SSCAPE		12
+#define SNDCARD_PSS_MPU     	13
+#define SNDCARD_PSS_MSS     	14
+#define SNDCARD_SSCAPE_MSS	15
+#define SNDCARD_TRXPRO		16
+#define SNDCARD_TRXPRO_SB	17
+#define SNDCARD_TRXPRO_MPU	18
+#define SNDCARD_MAD16		19
+#define SNDCARD_MAD16_MPU	20
+#define SNDCARD_CS4232		21
+#define SNDCARD_CS4232_MPU	22
+#define SNDCARD_MAUI		23
+#define SNDCARD_PSEUDO_MSS	24
+#define SNDCARD_GUSPNP		25
+#define SNDCARD_UART401		26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define	SIOCPARM_MASK	IOCPARM_MASK
+#define	SIOC_VOID	IOC_VOID
+#define	SIOC_OUT	IOC_OUT
+#define	SIOC_IN		IOC_IN
+#define	SIOC_INOUT	IOC_INOUT
+#define _SIOC_SIZE	_IOC_SIZE
+#define _SIOC_DIR	_IOC_DIR
+#define _SIOC_NONE	_IOC_NONE
+#define _SIOC_READ	_IOC_READ
+#define _SIOC_WRITE	_IOC_WRITE
+#define	_SIO		_IO
+#define	_SIOR		_IOR
+#define	_SIOW		_IOW
+#define	_SIOWR		_IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word.  The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define	SIOCTYPE		(0xff<<8) */
+#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
+#define	SIOC_VOID	0x00000000	/* no parameters */
+#define	SIOC_OUT	0x20000000	/* copy out parameters */
+#define	SIOC_IN		0x40000000	/* copy in parameters */
+#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
+#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
+#define _SIOC_DIR(x)	(x & 0xf0000000)
+#define _SIOC_NONE	SIOC_VOID
+#define _SIOC_READ	SIOC_OUT
+#define _SIOC_WRITE	SIOC_IN
+#  endif /* _IOWR */
+#endif  /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
+#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
+#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
+#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+	int devno;	/* Synthesizer # */
+	char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+	int devno;	/* Synthesizer # */
+	int bankno;	/* MIDI bank # (0=General MIDI) */
+	int instrno;	/* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+		unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
+#define SNDCTL_TMR_START		_SIO  ('T', 2)
+#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
+#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
+#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
+#	define TMR_INTERNAL		0x00000001
+#	define TMR_EXTERNAL		0x00000002
+#		define TMR_MODE_MIDI	0x00000010
+#		define TMR_MODE_FSK	0x00000020
+#		define TMR_MODE_CLS	0x00000040
+#		define TMR_MODE_SMPTE	0x00000080
+#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#if defined(_AIX) || defined(AIX) || defined(sparc) || defined(__sparc__) || defined(HPPA) || defined(PPC) || defined(__mc68000__)
+/* Big endian machines */
+#  define _PATCHKEY(id) (0xfd00|id)
+#  define AFMT_S16_NE AFMT_S16_BE
+#else
+#  define _PATCHKEY(id) ((id<<8)|0xfd)
+#  define AFMT_S16_NE AFMT_S16_LE
+#endif
+
+/*
+ *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ *	The following patch_info structure has been designed to support
+ *	Gravis UltraSound. It tries to be universal format for uploading
+ *	sample based patches but is probably too limited.
+ *
+ *      (PBD) As Hannu guessed, the GUS structure is too limited for 
+ *      the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+		unsigned short key;		/* Use WAVE_PATCH here */
+#define WAVE_PATCH	   _PATCHKEY(0x04)
+#define GUS_PATCH	   WAVE_PATCH
+#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
+
+		short device_no;	/* Synthesizer number */
+		short instr_no;		/* Midi pgm# */
+
+		unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
+				/* 	(use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
+#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
+#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
+#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM	0x40000000	/* For future use */
+#define WAVE_MULAW	0x20000000	/* For future use */
+/* Other bits must be zeroed */
+
+		int len;	/* Size of the wave data in bytes */
+		int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/* 
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+		unsigned int base_freq;
+		unsigned int base_note;
+		unsigned int high_note;
+		unsigned int low_note;
+		int panning;	/* -128=left, 127=right */
+		int detuning;
+
+/*	New fields introduced in version 1.99.5	*/
+
+       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
+		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
+		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
+
+	/* 
+	 * The tremolo, vibrato and scale info are not supported yet.
+	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+	 * WAVE_SCALE
+	 */
+
+		unsigned char	tremolo_sweep;
+		unsigned char	tremolo_rate;
+		unsigned char	tremolo_depth;
+	
+		unsigned char	vibrato_sweep;
+		unsigned char	vibrato_rate;
+		unsigned char	vibrato_depth;
+
+		int		scale_frequency;
+		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
+	
+	        int		volume;
+		int		fractions;
+		int		reserved1;
+	        int		spare[2];
+		char data[1];	/* The waveform data starts here */
+	};
+
+struct sysex_info {
+		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH	_PATCHKEY(0x05)
+#define MAUI_PATCH	_PATCHKEY(0x06)
+		short device_no;	/* Synthesizer number */
+		int len;	/* Size of the sysex data in bytes */
+		unsigned char data[1];	/* Sysex data starts here */
+	};
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size. 
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF		0
+#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
+#define SEQ_NOTEON		1
+#define	SEQ_FMNOTEON		SEQ_NOTEON
+#define SEQ_WAIT		TMR_WAIT_ABS
+#define SEQ_PGMCHANGE		3
+#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER		TMR_START
+#define SEQ_MIDIPUTC		5
+#define SEQ_DRUMON		6	/*** OBSOLETE ***/
+#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
+#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
+#define SEQ_AFTERTOUCH		9
+#define SEQ_CONTROLLER		10
+
+/*******************************************
+ *	Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define	   CTL_BANK_SELECT		0x00
+#define	   CTL_MODWHEEL			0x01
+#define    CTL_BREATH			0x02
+/*		undefined		0x03 */
+#define    CTL_FOOT			0x04
+#define    CTL_PORTAMENTO_TIME		0x05
+#define    CTL_DATA_ENTRY		0x06
+#define    CTL_MAIN_VOLUME		0x07
+#define    CTL_BALANCE			0x08
+/*		undefined		0x09 */
+#define    CTL_PAN			0x0a
+#define    CTL_EXPRESSION		0x0b
+/*		undefined		0x0c */
+/*		undefined		0x0d */
+/*		undefined		0x0e */
+/*		undefined		0x0f */
+#define    CTL_GENERAL_PURPOSE1	0x10
+#define    CTL_GENERAL_PURPOSE2	0x11
+#define    CTL_GENERAL_PURPOSE3	0x12
+#define    CTL_GENERAL_PURPOSE4	0x13
+/*		undefined		0x14 - 0x1f */
+
+/*		undefined		0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define    CTL_DAMPER_PEDAL		0x40
+#define    CTL_SUSTAIN			0x40	/* Alias */
+#define    CTL_HOLD			0x40	/* Alias */
+#define    CTL_PORTAMENTO		0x41
+#define    CTL_SOSTENUTO		0x42
+#define    CTL_SOFT_PEDAL		0x43
+/*		undefined		0x44 */
+#define    CTL_HOLD2			0x45
+/*		undefined		0x46 - 0x4f */
+
+#define    CTL_GENERAL_PURPOSE5	0x50
+#define    CTL_GENERAL_PURPOSE6	0x51
+#define    CTL_GENERAL_PURPOSE7	0x52
+#define    CTL_GENERAL_PURPOSE8	0x53
+/*		undefined		0x54 - 0x5a */
+#define    CTL_EXT_EFF_DEPTH		0x5b
+#define    CTL_TREMOLO_DEPTH		0x5c
+#define    CTL_CHORUS_DEPTH		0x5d
+#define    CTL_DETUNE_DEPTH		0x5e
+#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
+#define    CTL_PHASER_DEPTH		0x5f
+#define    CTL_DATA_INCREMENT		0x60
+#define    CTL_DATA_DECREMENT		0x61
+#define    CTL_NONREG_PARM_NUM_LSB	0x62
+#define    CTL_NONREG_PARM_NUM_MSB	0x63
+#define    CTL_REGIST_PARM_NUM_LSB	0x64
+#define    CTL_REGIST_PARM_NUM_MSB	0x65
+/*		undefined		0x66 - 0x78 */
+/*		reserved		0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define    CTRL_PITCH_BENDER		255
+#define    CTRL_PITCH_BENDER_RANGE	254
+#define    CTRL_EXPRESSION		253	/* Obsolete */
+#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
+#define SEQ_BALANCE		11
+#define SEQ_VOLMODE             12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO	1
+#define VOL_METHOD_LINEAR	2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ *	 input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE		0xfd	/* Long events */
+/*
+ *	SEQ_FULLSIZE events are used for loading patches/samples to the
+ *	synthesizer devices. These events are passed directly to the driver
+ *	of the associated synthesizer device. There is no limit to the size
+ *	of the extended events. These events are not queued but executed
+ *	immediately when the write() is called (execution can take several
+ *	seconds of time). 
+ *
+ *	When a SEQ_FULLSIZE message is written to the device, it must
+ *	be written using exactly one write() call. Other events cannot
+ *	be mixed to the same write.
+ *	
+ *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
+ *	/dev/sequencer. Don't write other data together with the instrument structure
+ *	Set the key field of the structure to FM_PATCH. The device field is used to
+ *	route the patch to the corresponding device.
+ *
+ *	For wave table use struct patch_info. Initialize the key field
+ *      to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH	_PATCHKEY(0x01)
+#define OPL3_PATCH	_PATCHKEY(0x03)
+		short		device;		/*	Synth# (0-4)	*/
+		int 		channel;	/*	Program# to be initialized 	*/
+		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
+	};
+
+struct synth_info {	/* Read only */
+		char	name[30];
+		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		int	synth_type;
+#define SYNTH_TYPE_FM			0
+#define SYNTH_TYPE_SAMPLE		1
+#define SYNTH_TYPE_MIDI			2	/* Midi interface */
+
+		int	synth_subtype;
+#define FM_TYPE_ADLIB			0x00
+#define FM_TYPE_OPL3			0x01
+#define MIDI_TYPE_MPU401		0x401
+
+#define SAMPLE_TYPE_BASIC		0x10
+#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT           0x11
+
+		int	perc_mode;	/* No longer supported */
+		int	nr_voices;
+		int	nr_drums;	/* Obsolete field */
+		int	instr_bank_size;
+		unsigned int	capabilities;	
+#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
+		int	dummies[19];	/* Reserve space */
+	};
+
+struct sound_timer_info {
+		char name[32];
+		int caps;
+	};
+
+#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
+
+struct midi_info {
+		char		name[30];
+		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		unsigned int	capabilities;	/* To be defined later */
+		int		dev_type;
+		int		dummies[18];	/* Reserve space */
+	};
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+		unsigned char cmd;
+		char nr_args, nr_returns;
+		unsigned char data[30];
+	} mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
+#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
+#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST			_SIO  ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
+
+/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
+#	define AFMT_QUERY		0x00000000	/* Return current fmt */
+#	define AFMT_MU_LAW		0x00000001
+#	define AFMT_A_LAW		0x00000002
+#	define AFMT_IMA_ADPCM		0x00000004
+#	define AFMT_U8			0x00000008
+#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
+#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
+#	define AFMT_S8			0x00000040
+#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
+#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
+#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
+#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+			int fragments;	/* # of available fragments (partially usend ones not counted) */
+			int fragstotal;	/* Total # of fragments allocated */
+			int fragsize;	/* Size of a fragment in bytes */
+
+			int bytes;	/* Available space in bytes (includes partially used fragments) */
+			/* Note! 'bytes' could be more than fragments*fragsize */
+		} audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
+#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
+#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
+#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
+#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
+#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
+							/* internal buffers which may */
+							/* cause some delays and */
+							/* decrease precision of timing */
+#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
+							/* Sometimes it's a DSP */
+							/* but usually not */
+#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
+#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
+#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
+#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
+#	define PCM_ENABLE_INPUT		0x00000001
+#	define PCM_ENABLE_OUTPUT		0x00000002
+
+typedef struct count_info {
+		int bytes;	/* Total # of bytes processed */
+		int blocks;	/* # of fragment transitions since last time */
+		int ptr;	/* Current DMA pointer value */
+	} count_info;
+
+#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+		unsigned *buffer;
+		int size;
+	} buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
+#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
+#	define DSP_BIND_QUERY		0x00000000
+#	define DSP_BIND_FRONT		0x00000001
+#	define DSP_BIND_SURR		0x00000002
+#	define DSP_BIND_CENTER_LFE	0x00000004
+#	define DSP_BIND_HANDSET		0x00000008
+#	define DSP_BIND_MIC		0x00000010
+#	define DSP_BIND_MODEM1		0x00000020
+#	define DSP_BIND_MODEM2		0x00000040
+#	define DSP_BIND_I2S		0x00000080
+#	define DSP_BIND_SPDIF		0x00000100
+
+#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
+#	define SPDIF_PRO	0x0001
+#	define SPDIF_N_AUD	0x0002
+#	define SPDIF_COPY	0x0004
+#	define SPDIF_PRE	0x0008
+#	define SPDIF_CC		0x07f0
+#	define SPDIF_L		0x0800
+#	define SPDIF_DRS	0x4000
+#	define SPDIF_V		0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ * 
+ *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ *	playback buffer whenever an underrun occurs. This consumes some time
+ *	prevents looping the existing buffer.
+ *	APF_CPUINTENS is intended to be set by CPU intensive applications which
+ *	are likely to run out of time occasionally. In this mode the buffer cleanup is
+ *	disabled which saves CPU time but also let's the previous buffer content to
+ *	be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
+#define	  APF_NORMAL	0	/* Normal applications */
+#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
+#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST			SNDCTL_DSP_POST
+#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+		int command;	/* Set to 0 if not used */
+		int flags;
+#define CPF_NONE		0x0000
+#define CPF_FIRST		0x0001	/* First block */
+#define CPF_LAST		0x0002	/* Last block */
+		int len;
+		int offs;	/* If required by the device (0 if not used) */
+
+		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+	} copr_buffer;
+
+typedef struct copr_debug_buf {
+		int command;	/* Used internally. Set to 0 */
+		int parm1;
+		int parm2;
+		int flags;	
+		int len;	/* Length of data in bytes */
+	} copr_debug_buf;
+
+typedef struct copr_msg {
+		int len;
+		unsigned char data[4000];
+	} copr_msg;
+
+#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
+#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
+#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
+#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
+#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
+#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+	
+/* 
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES	25
+#define SOUND_MIXER_VOLUME	0
+#define SOUND_MIXER_BASS	1
+#define SOUND_MIXER_TREBLE	2
+#define SOUND_MIXER_SYNTH	3
+#define SOUND_MIXER_PCM		4
+#define SOUND_MIXER_SPEAKER	5
+#define SOUND_MIXER_LINE	6
+#define SOUND_MIXER_MIC		7
+#define SOUND_MIXER_CD		8
+#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
+#define SOUND_MIXER_ALTPCM	10
+#define SOUND_MIXER_RECLEV	11	/* Recording level */
+#define SOUND_MIXER_IGAIN	12	/* Input gain */
+#define SOUND_MIXER_OGAIN	13	/* Output gain */
+/* 
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
+#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
+#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
+#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN	20	/* Phone input */
+#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
+#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO	23	/* Radio in */
+#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN		28
+#define SOUND_ONOFF_MAX		30
+
+/* Note!	Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE	31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
+				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
+				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+				 "phin", "phout", "video", "radio", "monitor"}
+
+/*	Device bitmask identifiers	*/
+
+#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS	0xfc
+#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
+
+/*	Device mask bits	*/
+
+#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev)		_SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+  char id[16];
+  char name[32];
+  int  modify_counter;
+  int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+  char id[16];
+  char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+  int num;	/* Index to volume table */
+  char name[32];
+  int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
+
+/* 
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION			_SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event: 
+ *
+ *	0x8X = system level events,
+ *	0x9X = device/port specific events, event[1] = device/port,
+ *		The last 4 bits give the subtype:
+ *			0x02	= Channel event (event[3] = chn).
+ *			0x01	= note event (event[4] = note).
+ *			(0x01 is not used alone but always with bit 0x02).
+ *	       event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL		0x80
+#define EV_TIMING		0x81
+#define EV_CHN_COMMON		0x92
+#define EV_CHN_VOICE		0x93
+#define EV_SYSEX		0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF		0x80
+#define MIDI_NOTEON		0x90
+#define MIDI_KEY_PRESSURE	0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE		0xB0
+#define MIDI_PGM_CHANGE		0xC0
+#define MIDI_CHN_PRESSURE	0xD0
+#define MIDI_PITCH_BEND		0xE0
+
+#define MIDI_SYSTEM_PREFIX	0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL		1	/* Time relative to the prev time */
+#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
+#define TMR_STOP		3
+#define TMR_START		4
+#define TMR_CONTINUE		5
+#define TMR_TEMPO		6
+#define TMR_ECHO		8
+#define TMR_CLOCK		9	/* MIDI clock */
+#define TMR_SPP			10	/* Song position pointer */
+#define TMR_TIMESIG		11	/* Time signature */
+
+/*
+ *	Local event types
+ */
+#define LOCL_STARTAUDIO		1
+
+#if (!defined(__KERNEL__) && !defined(KERNEL) && !defined(INKERNEL) && !defined(_KERNEL)) || defined(USE_SEQ_MACROS) 
+/*
+ *	Some convenience macros to simplify programming of the
+ *	/dev/sequencer interface
+ *
+ *	These macros define the API which should be used when possible.
+ */
+#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void);	/* This function must be provided by programs */
+
+extern int OSS_init(int seqfd, int buflen);
+extern void OSS_seqbuf_dump(int fd, unsigned char *buf, int buflen);
+extern void OSS_seq_advbuf(int len, int fd, unsigned char *buf, int buflen);
+extern void OSS_seq_needbuf(int len, int fd, unsigned char *buf, int buflen);
+extern void OSS_patch_caching(int dev, int chn, int patch,
+			      int fd, unsigned char *buf, int buflen);
+extern void OSS_drum_caching(int dev, int chn, int patch,
+			      int fd, unsigned char *buf, int buflen);
+extern void OSS_write_patch(int fd, unsigned char *buf, int len);
+extern int OSS_write_patch2(int fd, unsigned char *buf, int len);
+
+#define SEQ_PM_DEFINES int __foo_bar___
+#ifdef OSSLIB
+#  define SEQ_USE_EXTBUF() \
+		extern unsigned char *_seqbuf; \
+		extern int _seqbuflen;extern int _seqbufptr
+#  define SEQ_DEFINEBUF(len) SEQ_USE_EXTBUF();static int _requested_seqbuflen=len
+#  define _SEQ_ADVBUF(len) OSS_seq_advbuf(len, seqfd, _seqbuf, _seqbuflen)
+#  define _SEQ_NEEDBUF(len) OSS_seq_needbuf(len, seqfd, _seqbuf, _seqbuflen)
+#  define SEQ_DUMPBUF() OSS_seqbuf_dump(seqfd, _seqbuf, _seqbuflen)
+
+#  define SEQ_LOAD_GMINSTR(dev, instr) \
+		OSS_patch_caching(dev, -1, instr, seqfd, _seqbuf, _seqbuflen)
+#  define SEQ_LOAD_GMDRUM(dev, drum) \
+		OSS_drum_caching(dev, -1, drum, seqfd, _seqbuf, _seqbuflen)
+#else /* !OSSLIB */
+
+#  define SEQ_LOAD_GMINSTR(dev, instr)
+#  define SEQ_LOAD_GMDRUM(dev, drum)
+
+#  define SEQ_USE_EXTBUF() \
+		extern unsigned char _seqbuf[]; \
+		extern int _seqbuflen;extern int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
+ *
+ *	int seqfd;		-- The file descriptor for /dev/sequencer.
+ *
+ *	void
+ *	seqbuf_dump ()
+ *	{
+ *	  if (_seqbufptr)
+ *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ *	      {
+ *		perror ("write /dev/sequencer");
+ *		exit (-1);
+ *	      }
+ *	  _seqbufptr = 0;
+ *	}
+ */
+
+#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len)		_seqbufptr += len
+#define SEQ_DUMPBUF			seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ * 
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf 		 name of the buffer (unsigned char[]) 
+ * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
+ *				 size of the event, this macro can be used.
+ *				 Otherwise this must be defined as empty.
+ * #define _seqbufptr		 Define the name of index variable or 0 if
+ *				 not required. 
+ */
+#define _SEQ_NEEDBUF(len)	/* empty */
+#endif
+#endif /* !OSSLIB */
+
+#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (mode);\
+					_seqbuf[_seqbufptr+4] = 0;\
+					_seqbuf[_seqbufptr+5] = 0;\
+					_seqbuf[_seqbufptr+6] = 0;\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (note);\
+					_seqbuf[_seqbufptr+5] = (parm);\
+					_seqbuf[_seqbufptr+6] = (0);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (p1);\
+					_seqbuf[_seqbufptr+5] = (p2);\
+					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+					_SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+					{int ii, ll=(len); \
+					 unsigned char *bufp=buf;\
+					 if (ll>6)ll=6;\
+					_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_SYSEX;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					for(ii=0;ii<ll;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+					for(ii=ll;ii<6;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#ifdef OSSLIB
+#   define SEQ_PGM_CHANGE(dev, chn, patch) \
+		{OSS_patch_caching(dev, chn, patch, seqfd, _seqbuf, _seqbuflen); \
+		 _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0);}
+#else
+#   define SEQ_PGM_CHANGE(dev, chn, patch) \
+		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+#endif
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (voice);\
+					_seqbuf[_seqbufptr+4] = (controller);\
+					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
+					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and syncronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only 
+ */
+
+#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
+					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+					_seqbuf[_seqbufptr+1] = (byte);\
+					_seqbuf[_seqbufptr+2] = (device);\
+					_seqbuf[_seqbufptr+3] = 0;\
+					_SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#ifdef OSSLIB
+#   define SEQ_WRPATCH(patchx, len) \
+		OSS_write_patch(seqfd, (char*)(patchx), len)
+#   define SEQ_WRPATCH2(patchx, len) \
+		OSS_write_patch2(seqfd, (char*)(patchx), len)
+#else
+#   define SEQ_WRPATCH(patchx, len) \
+		{if (_seqbufptr) SEQ_DUMPBUF();\
+		 if (write(seqfd, (char*)(patchx), len)==-1) \
+		    perror("Write patch: /dev/sequencer");}
+#   define SEQ_WRPATCH2(patchx, len) \
+		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+#endif
+
+#endif
+#endif
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
new file mode 100644
index 000000000000..e895f3eaf53a
--- /dev/null
+++ b/include/linux/spinlock.h
@@ -0,0 +1,606 @@
+#ifndef __LINUX_SPINLOCK_H
+#define __LINUX_SPINLOCK_H
+
+/*
+ * include/linux/spinlock.h - generic locking declarations
+ */
+
+#include <linux/config.h>
+#include <linux/preempt.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/kernel.h>
+#include <linux/stringify.h>
+
+#include <asm/processor.h>	/* for cpu relax */
+#include <asm/system.h>
+
+/*
+ * Must define these before including other files, inline functions need them
+ */
+#define LOCK_SECTION_NAME                       \
+        ".text.lock." __stringify(KBUILD_BASENAME)
+
+#define LOCK_SECTION_START(extra)               \
+        ".subsection 1\n\t"                     \
+        extra                                   \
+        ".ifndef " LOCK_SECTION_NAME "\n\t"     \
+        LOCK_SECTION_NAME ":\n\t"               \
+        ".endif\n"
+
+#define LOCK_SECTION_END                        \
+        ".previous\n\t"
+
+#define __lockfunc fastcall __attribute__((section(".spinlock.text")))
+
+/*
+ * If CONFIG_SMP is set, pull in the _raw_* definitions
+ */
+#ifdef CONFIG_SMP
+
+#define assert_spin_locked(x)	BUG_ON(!spin_is_locked(x))
+#include <asm/spinlock.h>
+
+int __lockfunc _spin_trylock(spinlock_t *lock);
+int __lockfunc _read_trylock(rwlock_t *lock);
+int __lockfunc _write_trylock(rwlock_t *lock);
+
+void __lockfunc _spin_lock(spinlock_t *lock)	__acquires(spinlock_t);
+void __lockfunc _read_lock(rwlock_t *lock)	__acquires(rwlock_t);
+void __lockfunc _write_lock(rwlock_t *lock)	__acquires(rwlock_t);
+
+void __lockfunc _spin_unlock(spinlock_t *lock)	__releases(spinlock_t);
+void __lockfunc _read_unlock(rwlock_t *lock)	__releases(rwlock_t);
+void __lockfunc _write_unlock(rwlock_t *lock)	__releases(rwlock_t);
+
+unsigned long __lockfunc _spin_lock_irqsave(spinlock_t *lock)	__acquires(spinlock_t);
+unsigned long __lockfunc _read_lock_irqsave(rwlock_t *lock)	__acquires(rwlock_t);
+unsigned long __lockfunc _write_lock_irqsave(rwlock_t *lock)	__acquires(rwlock_t);
+
+void __lockfunc _spin_lock_irq(spinlock_t *lock)	__acquires(spinlock_t);
+void __lockfunc _spin_lock_bh(spinlock_t *lock)		__acquires(spinlock_t);
+void __lockfunc _read_lock_irq(rwlock_t *lock)		__acquires(rwlock_t);
+void __lockfunc _read_lock_bh(rwlock_t *lock)		__acquires(rwlock_t);
+void __lockfunc _write_lock_irq(rwlock_t *lock)		__acquires(rwlock_t);
+void __lockfunc _write_lock_bh(rwlock_t *lock)		__acquires(rwlock_t);
+
+void __lockfunc _spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)	__releases(spinlock_t);
+void __lockfunc _spin_unlock_irq(spinlock_t *lock)				__releases(spinlock_t);
+void __lockfunc _spin_unlock_bh(spinlock_t *lock)				__releases(spinlock_t);
+void __lockfunc _read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)	__releases(rwlock_t);
+void __lockfunc _read_unlock_irq(rwlock_t *lock)				__releases(rwlock_t);
+void __lockfunc _read_unlock_bh(rwlock_t *lock)					__releases(rwlock_t);
+void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)	__releases(rwlock_t);
+void __lockfunc _write_unlock_irq(rwlock_t *lock)				__releases(rwlock_t);
+void __lockfunc _write_unlock_bh(rwlock_t *lock)				__releases(rwlock_t);
+
+int __lockfunc _spin_trylock_bh(spinlock_t *lock);
+int __lockfunc generic_raw_read_trylock(rwlock_t *lock);
+int in_lock_functions(unsigned long addr);
+
+#else
+
+#define in_lock_functions(ADDR) 0
+
+#if !defined(CONFIG_PREEMPT) && !defined(CONFIG_DEBUG_SPINLOCK)
+# define _atomic_dec_and_lock(atomic,lock) atomic_dec_and_test(atomic)
+# define ATOMIC_DEC_AND_LOCK
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+ 
+#define SPINLOCK_MAGIC	0x1D244B3C
+typedef struct {
+	unsigned long magic;
+	volatile unsigned long lock;
+	volatile unsigned int babble;
+	const char *module;
+	char *owner;
+	int oline;
+} spinlock_t;
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { SPINLOCK_MAGIC, 0, 10, __FILE__ , NULL, 0}
+
+#define spin_lock_init(x) \
+	do { \
+		(x)->magic = SPINLOCK_MAGIC; \
+		(x)->lock = 0; \
+		(x)->babble = 5; \
+		(x)->module = __FILE__; \
+		(x)->owner = NULL; \
+		(x)->oline = 0; \
+	} while (0)
+
+#define CHECK_LOCK(x) \
+	do { \
+	 	if ((x)->magic != SPINLOCK_MAGIC) { \
+			printk(KERN_ERR "%s:%d: spin_is_locked on uninitialized spinlock %p.\n", \
+					__FILE__, __LINE__, (x)); \
+		} \
+	} while(0)
+
+#define _raw_spin_lock(x)		\
+	do { \
+	 	CHECK_LOCK(x); \
+		if ((x)->lock&&(x)->babble) { \
+			(x)->babble--; \
+			printk("%s:%d: spin_lock(%s:%p) already locked by %s/%d\n", \
+					__FILE__,__LINE__, (x)->module, \
+					(x), (x)->owner, (x)->oline); \
+		} \
+		(x)->lock = 1; \
+		(x)->owner = __FILE__; \
+		(x)->oline = __LINE__; \
+	} while (0)
+
+/* without debugging, spin_is_locked on UP always says
+ * FALSE. --> printk if already locked. */
+#define spin_is_locked(x) \
+	({ \
+	 	CHECK_LOCK(x); \
+		if ((x)->lock&&(x)->babble) { \
+			(x)->babble--; \
+			printk("%s:%d: spin_is_locked(%s:%p) already locked by %s/%d\n", \
+					__FILE__,__LINE__, (x)->module, \
+					(x), (x)->owner, (x)->oline); \
+		} \
+		0; \
+	})
+
+/* with debugging, assert_spin_locked() on UP does check
+ * the lock value properly */
+#define assert_spin_locked(x) \
+	({ \
+		CHECK_LOCK(x); \
+		BUG_ON(!(x)->lock); \
+	})
+
+/* without debugging, spin_trylock on UP always says
+ * TRUE. --> printk if already locked. */
+#define _raw_spin_trylock(x) \
+	({ \
+	 	CHECK_LOCK(x); \
+		if ((x)->lock&&(x)->babble) { \
+			(x)->babble--; \
+			printk("%s:%d: spin_trylock(%s:%p) already locked by %s/%d\n", \
+					__FILE__,__LINE__, (x)->module, \
+					(x), (x)->owner, (x)->oline); \
+		} \
+		(x)->lock = 1; \
+		(x)->owner = __FILE__; \
+		(x)->oline = __LINE__; \
+		1; \
+	})
+
+#define spin_unlock_wait(x)	\
+	do { \
+	 	CHECK_LOCK(x); \
+		if ((x)->lock&&(x)->babble) { \
+			(x)->babble--; \
+			printk("%s:%d: spin_unlock_wait(%s:%p) owned by %s/%d\n", \
+					__FILE__,__LINE__, (x)->module, (x), \
+					(x)->owner, (x)->oline); \
+		}\
+	} while (0)
+
+#define _raw_spin_unlock(x) \
+	do { \
+	 	CHECK_LOCK(x); \
+		if (!(x)->lock&&(x)->babble) { \
+			(x)->babble--; \
+			printk("%s:%d: spin_unlock(%s:%p) not locked\n", \
+					__FILE__,__LINE__, (x)->module, (x));\
+		} \
+		(x)->lock = 0; \
+	} while (0)
+#else
+/*
+ * gcc versions before ~2.95 have a nasty bug with empty initializers.
+ */
+#if (__GNUC__ > 2)
+  typedef struct { } spinlock_t;
+  #define SPIN_LOCK_UNLOCKED (spinlock_t) { }
+#else
+  typedef struct { int gcc_is_buggy; } spinlock_t;
+  #define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+#endif
+
+/*
+ * If CONFIG_SMP is unset, declare the _raw_* definitions as nops
+ */
+#define spin_lock_init(lock)	do { (void)(lock); } while(0)
+#define _raw_spin_lock(lock)	do { (void)(lock); } while(0)
+#define spin_is_locked(lock)	((void)(lock), 0)
+#define assert_spin_locked(lock)	do { (void)(lock); } while(0)
+#define _raw_spin_trylock(lock)	(((void)(lock), 1))
+#define spin_unlock_wait(lock)	(void)(lock)
+#define _raw_spin_unlock(lock) do { (void)(lock); } while(0)
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+/* RW spinlocks: No debug version */
+
+#if (__GNUC__ > 2)
+  typedef struct { } rwlock_t;
+  #define RW_LOCK_UNLOCKED (rwlock_t) { }
+#else
+  typedef struct { int gcc_is_buggy; } rwlock_t;
+  #define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+#endif
+
+#define rwlock_init(lock)	do { (void)(lock); } while(0)
+#define _raw_read_lock(lock)	do { (void)(lock); } while(0)
+#define _raw_read_unlock(lock)	do { (void)(lock); } while(0)
+#define _raw_write_lock(lock)	do { (void)(lock); } while(0)
+#define _raw_write_unlock(lock)	do { (void)(lock); } while(0)
+#define read_can_lock(lock)	(((void)(lock), 1))
+#define write_can_lock(lock)	(((void)(lock), 1))
+#define _raw_read_trylock(lock) ({ (void)(lock); (1); })
+#define _raw_write_trylock(lock) ({ (void)(lock); (1); })
+
+#define _spin_trylock(lock)	({preempt_disable(); _raw_spin_trylock(lock) ? \
+				1 : ({preempt_enable(); 0;});})
+
+#define _read_trylock(lock)	({preempt_disable();_raw_read_trylock(lock) ? \
+				1 : ({preempt_enable(); 0;});})
+
+#define _write_trylock(lock)	({preempt_disable(); _raw_write_trylock(lock) ? \
+				1 : ({preempt_enable(); 0;});})
+
+#define _spin_trylock_bh(lock)	({preempt_disable(); local_bh_disable(); \
+				_raw_spin_trylock(lock) ? \
+				1 : ({preempt_enable(); local_bh_enable(); 0;});})
+
+#define _spin_lock(lock)	\
+do { \
+	preempt_disable(); \
+	_raw_spin_lock(lock); \
+	__acquire(lock); \
+} while(0)
+
+#define _write_lock(lock) \
+do { \
+	preempt_disable(); \
+	_raw_write_lock(lock); \
+	__acquire(lock); \
+} while(0)
+ 
+#define _read_lock(lock)	\
+do { \
+	preempt_disable(); \
+	_raw_read_lock(lock); \
+	__acquire(lock); \
+} while(0)
+
+#define _spin_unlock(lock) \
+do { \
+	_raw_spin_unlock(lock); \
+	preempt_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _write_unlock(lock) \
+do { \
+	_raw_write_unlock(lock); \
+	preempt_enable(); \
+	__release(lock); \
+} while(0)
+
+#define _read_unlock(lock) \
+do { \
+	_raw_read_unlock(lock); \
+	preempt_enable(); \
+	__release(lock); \
+} while(0)
+
+#define _spin_lock_irqsave(lock, flags) \
+do {	\
+	local_irq_save(flags); \
+	preempt_disable(); \
+	_raw_spin_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _spin_lock_irq(lock) \
+do { \
+	local_irq_disable(); \
+	preempt_disable(); \
+	_raw_spin_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _spin_lock_bh(lock) \
+do { \
+	local_bh_disable(); \
+	preempt_disable(); \
+	_raw_spin_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _read_lock_irqsave(lock, flags) \
+do {	\
+	local_irq_save(flags); \
+	preempt_disable(); \
+	_raw_read_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _read_lock_irq(lock) \
+do { \
+	local_irq_disable(); \
+	preempt_disable(); \
+	_raw_read_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _read_lock_bh(lock) \
+do { \
+	local_bh_disable(); \
+	preempt_disable(); \
+	_raw_read_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _write_lock_irqsave(lock, flags) \
+do {	\
+	local_irq_save(flags); \
+	preempt_disable(); \
+	_raw_write_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _write_lock_irq(lock) \
+do { \
+	local_irq_disable(); \
+	preempt_disable(); \
+	_raw_write_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _write_lock_bh(lock) \
+do { \
+	local_bh_disable(); \
+	preempt_disable(); \
+	_raw_write_lock(lock); \
+	__acquire(lock); \
+} while (0)
+
+#define _spin_unlock_irqrestore(lock, flags) \
+do { \
+	_raw_spin_unlock(lock); \
+	local_irq_restore(flags); \
+	preempt_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _spin_unlock_irq(lock) \
+do { \
+	_raw_spin_unlock(lock); \
+	local_irq_enable(); \
+	preempt_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _spin_unlock_bh(lock) \
+do { \
+	_raw_spin_unlock(lock); \
+	preempt_enable(); \
+	local_bh_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _write_unlock_bh(lock) \
+do { \
+	_raw_write_unlock(lock); \
+	preempt_enable(); \
+	local_bh_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _read_unlock_irqrestore(lock, flags) \
+do { \
+	_raw_read_unlock(lock); \
+	local_irq_restore(flags); \
+	preempt_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _write_unlock_irqrestore(lock, flags) \
+do { \
+	_raw_write_unlock(lock); \
+	local_irq_restore(flags); \
+	preempt_enable(); \
+	__release(lock); \
+} while (0)
+
+#define _read_unlock_irq(lock)	\
+do { \
+	_raw_read_unlock(lock);	\
+	local_irq_enable();	\
+	preempt_enable();	\
+	__release(lock); \
+} while (0)
+
+#define _read_unlock_bh(lock)	\
+do { \
+	_raw_read_unlock(lock);	\
+	local_bh_enable();	\
+	preempt_enable();	\
+	__release(lock); \
+} while (0)
+
+#define _write_unlock_irq(lock)	\
+do { \
+	_raw_write_unlock(lock);	\
+	local_irq_enable();	\
+	preempt_enable();	\
+	__release(lock); \
+} while (0)
+
+#endif /* !SMP */
+
+/*
+ * Define the various spin_lock and rw_lock methods.  Note we define these
+ * regardless of whether CONFIG_SMP or CONFIG_PREEMPT are set. The various
+ * methods are defined as nops in the case they are not required.
+ */
+#define spin_trylock(lock)	__cond_lock(_spin_trylock(lock))
+#define read_trylock(lock)	__cond_lock(_read_trylock(lock))
+#define write_trylock(lock)	__cond_lock(_write_trylock(lock))
+
+#define spin_lock(lock)		_spin_lock(lock)
+#define write_lock(lock)	_write_lock(lock)
+#define read_lock(lock)		_read_lock(lock)
+
+#ifdef CONFIG_SMP
+#define spin_lock_irqsave(lock, flags)	flags = _spin_lock_irqsave(lock)
+#define read_lock_irqsave(lock, flags)	flags = _read_lock_irqsave(lock)
+#define write_lock_irqsave(lock, flags)	flags = _write_lock_irqsave(lock)
+#else
+#define spin_lock_irqsave(lock, flags)	_spin_lock_irqsave(lock, flags)
+#define read_lock_irqsave(lock, flags)	_read_lock_irqsave(lock, flags)
+#define write_lock_irqsave(lock, flags)	_write_lock_irqsave(lock, flags)
+#endif
+
+#define spin_lock_irq(lock)		_spin_lock_irq(lock)
+#define spin_lock_bh(lock)		_spin_lock_bh(lock)
+
+#define read_lock_irq(lock)		_read_lock_irq(lock)
+#define read_lock_bh(lock)		_read_lock_bh(lock)
+
+#define write_lock_irq(lock)		_write_lock_irq(lock)
+#define write_lock_bh(lock)		_write_lock_bh(lock)
+
+#define spin_unlock(lock)	_spin_unlock(lock)
+#define write_unlock(lock)	_write_unlock(lock)
+#define read_unlock(lock)	_read_unlock(lock)
+
+#define spin_unlock_irqrestore(lock, flags)	_spin_unlock_irqrestore(lock, flags)
+#define spin_unlock_irq(lock)		_spin_unlock_irq(lock)
+#define spin_unlock_bh(lock)		_spin_unlock_bh(lock)
+
+#define read_unlock_irqrestore(lock, flags)	_read_unlock_irqrestore(lock, flags)
+#define read_unlock_irq(lock)			_read_unlock_irq(lock)
+#define read_unlock_bh(lock)			_read_unlock_bh(lock)
+
+#define write_unlock_irqrestore(lock, flags)	_write_unlock_irqrestore(lock, flags)
+#define write_unlock_irq(lock)			_write_unlock_irq(lock)
+#define write_unlock_bh(lock)			_write_unlock_bh(lock)
+
+#define spin_trylock_bh(lock)			__cond_lock(_spin_trylock_bh(lock))
+
+#define spin_trylock_irq(lock) \
+({ \
+	local_irq_disable(); \
+	_spin_trylock(lock) ? \
+	1 : ({local_irq_enable(); 0; }); \
+})
+
+#define spin_trylock_irqsave(lock, flags) \
+({ \
+	local_irq_save(flags); \
+	_spin_trylock(lock) ? \
+	1 : ({local_irq_restore(flags); 0;}); \
+})
+
+#ifdef CONFIG_LOCKMETER
+extern void _metered_spin_lock   (spinlock_t *lock);
+extern void _metered_spin_unlock (spinlock_t *lock);
+extern int  _metered_spin_trylock(spinlock_t *lock);
+extern void _metered_read_lock    (rwlock_t *lock);
+extern void _metered_read_unlock  (rwlock_t *lock);
+extern void _metered_write_lock   (rwlock_t *lock);
+extern void _metered_write_unlock (rwlock_t *lock);
+extern int  _metered_read_trylock (rwlock_t *lock);
+extern int  _metered_write_trylock(rwlock_t *lock);
+#endif
+
+/* "lock on reference count zero" */
+#ifndef ATOMIC_DEC_AND_LOCK
+#include <asm/atomic.h>
+extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
+#endif
+
+#define atomic_dec_and_lock(atomic,lock) __cond_lock(_atomic_dec_and_lock(atomic,lock))
+
+/*
+ *  bit-based spin_lock()
+ *
+ * Don't use this unless you really need to: spin_lock() and spin_unlock()
+ * are significantly faster.
+ */
+static inline void bit_spin_lock(int bitnum, unsigned long *addr)
+{
+	/*
+	 * Assuming the lock is uncontended, this never enters
+	 * the body of the outer loop. If it is contended, then
+	 * within the inner loop a non-atomic test is used to
+	 * busywait with less bus contention for a good time to
+	 * attempt to acquire the lock bit.
+	 */
+	preempt_disable();
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	while (test_and_set_bit(bitnum, addr)) {
+		while (test_bit(bitnum, addr)) {
+			preempt_enable();
+			cpu_relax();
+			preempt_disable();
+		}
+	}
+#endif
+	__acquire(bitlock);
+}
+
+/*
+ * Return true if it was acquired
+ */
+static inline int bit_spin_trylock(int bitnum, unsigned long *addr)
+{
+	preempt_disable();	
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	if (test_and_set_bit(bitnum, addr)) {
+		preempt_enable();
+		return 0;
+	}
+#endif
+	__acquire(bitlock);
+	return 1;
+}
+
+/*
+ *  bit-based spin_unlock()
+ */
+static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
+{
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	BUG_ON(!test_bit(bitnum, addr));
+	smp_mb__before_clear_bit();
+	clear_bit(bitnum, addr);
+#endif
+	preempt_enable();
+	__release(bitlock);
+}
+
+/*
+ * Return true if the lock is held.
+ */
+static inline int bit_spin_is_locked(int bitnum, unsigned long *addr)
+{
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	return test_bit(bitnum, addr);
+#elif defined CONFIG_PREEMPT
+	return preempt_count();
+#else
+	return 1;
+#endif
+}
+
+#define DEFINE_SPINLOCK(x) spinlock_t x = SPIN_LOCK_UNLOCKED
+#define DEFINE_RWLOCK(x) rwlock_t x = RW_LOCK_UNLOCKED
+
+/**
+ * spin_can_lock - would spin_trylock() succeed?
+ * @lock: the spinlock in question.
+ */
+#define spin_can_lock(lock)		(!spin_is_locked(lock))
+
+#endif /* __LINUX_SPINLOCK_H */
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
new file mode 100644
index 000000000000..e89b77b6505a
--- /dev/null
+++ b/include/linux/stallion.h
@@ -0,0 +1,154 @@
+/*****************************************************************************/
+
+/*
+ *	stallion.h  -- stallion multiport serial driver.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/version.h>
+
+/*****************************************************************************/
+#ifndef	_STALLION_H
+#define	_STALLION_H
+/*****************************************************************************/
+
+/*
+ *	Define important driver constants here.
+ */
+#define	STL_MAXBRDS		4
+#define	STL_MAXPANELS		4
+#define	STL_MAXBANKS		8
+#define	STL_PORTSPERPANEL	16
+#define	STL_MAXPORTS		64
+#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
+
+
+/*
+ *	Define a set of structures to hold all the board/panel/port info
+ *	for our ports. These will be dynamically allocated as required.
+ */
+
+/*
+ *	Define a ring queue structure for each port. This will hold the
+ *	TX data waiting to be output. Characters are fed into this buffer
+ *	from the line discipline (or even direct from user space!) and
+ *	then fed into the UARTs during interrupts. Will use a classic ring
+ *	queue here for this. The good thing about this type of ring queue
+ *	is that the head and tail pointers can be updated without interrupt
+ *	protection - since "write" code only needs to change the head, and
+ *	interrupt code only needs to change the tail.
+ */
+typedef struct {
+	char	*buf;
+	char	*head;
+	char	*tail;
+} stlrq_t;
+
+/*
+ *	Port, panel and board structures to hold status info about each.
+ *	The board structure contains pointers to structures for each panel
+ *	connected to it, and in turn each panel structure contains pointers
+ *	for each port structure for each port on that panel. Note that
+ *	the port structure also contains the board and panel number that it
+ *	is associated with, this makes it (fairly) easy to get back to the
+ *	board/panel info for a port.
+ */
+typedef struct stlport {
+	unsigned long		magic;
+	int			portnr;
+	int			panelnr;
+	int			brdnr;
+	int			ioaddr;
+	int			uartaddr;
+	int			pagenr;
+	long			istate;
+	int			flags;
+	int			baud_base;
+	int			custom_divisor;
+	int			close_delay;
+	int			closing_wait;
+	int			refcount;
+	int			openwaitcnt;
+	int			brklen;
+	unsigned int		sigs;
+	unsigned int		rxignoremsk;
+	unsigned int		rxmarkmsk;
+	unsigned int		imr;
+	unsigned int		crenable;
+	unsigned long		clk;
+	unsigned long		hwid;
+	void			*uartp;
+	struct tty_struct	*tty;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	struct work_struct	tqueue;
+	comstats_t		stats;
+	stlrq_t			tx;
+} stlport_t;
+
+typedef struct stlpanel {
+	unsigned long	magic;
+	int		panelnr;
+	int		brdnr;
+	int		pagenr;
+	int		nrports;
+	int		iobase;
+	void		*uartp;
+	void		(*isr)(struct stlpanel *panelp, unsigned int iobase);
+	unsigned int	hwid;
+	unsigned int	ackmask;
+	stlport_t	*ports[STL_PORTSPERPANEL];
+} stlpanel_t;
+
+typedef struct stlbrd {
+	unsigned long	magic;
+	int		brdnr;
+	int		brdtype;
+	int		state;
+	int		nrpanels;
+	int		nrports;
+	int		nrbnks;
+	int		irq;
+	int		irqtype;
+	int		(*isr)(struct stlbrd *brdp);
+	unsigned int	ioaddr1;
+	unsigned int	ioaddr2;
+	unsigned int	iosize1;
+	unsigned int	iosize2;
+	unsigned int	iostatus;
+	unsigned int	ioctrl;
+	unsigned int	ioctrlval;
+	unsigned int	hwid;
+	unsigned long	clk;
+	unsigned int	bnkpageaddr[STL_MAXBANKS];
+	unsigned int	bnkstataddr[STL_MAXBANKS];
+	stlpanel_t	*bnk2panel[STL_MAXBANKS];
+	stlpanel_t	*panels[STL_MAXPANELS];
+} stlbrd_t;
+
+
+/*
+ *	Define MAGIC numbers used for above structures.
+ */
+#define	STL_PORTMAGIC	0x5a7182c9
+#define	STL_PANELMAGIC	0x7ef621a1
+#define	STL_BOARDMAGIC	0xa2267f52
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/stat.h b/include/linux/stat.h
new file mode 100644
index 000000000000..8ff2a122dfef
--- /dev/null
+++ b/include/linux/stat.h
@@ -0,0 +1,77 @@
+#ifndef _LINUX_STAT_H
+#define _LINUX_STAT_H
+
+#ifdef __KERNEL__
+
+#include <asm/stat.h>
+
+#endif
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+#ifdef __KERNEL__
+#define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
+#define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
+#define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
+#define S_IWUGO		(S_IWUSR|S_IWGRP|S_IWOTH)
+#define S_IXUGO		(S_IXUSR|S_IXGRP|S_IXOTH)
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+struct kstat {
+	unsigned long	ino;
+	dev_t		dev;
+	umode_t		mode;
+	unsigned int	nlink;
+	uid_t		uid;
+	gid_t		gid;
+	dev_t		rdev;
+	loff_t		size;
+	struct timespec  atime;
+	struct timespec	mtime;
+	struct timespec	ctime;
+	unsigned long	blksize;
+	unsigned long	blocks;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/statfs.h b/include/linux/statfs.h
new file mode 100644
index 000000000000..ad83a2bdb821
--- /dev/null
+++ b/include/linux/statfs.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_STATFS_H
+#define _LINUX_STATFS_H
+
+#include <linux/types.h>
+
+#include <asm/statfs.h>
+
+struct kstatfs {
+	long f_type;
+	long f_bsize;
+	sector_t f_blocks;
+	sector_t f_bfree;
+	sector_t f_bavail;
+	sector_t f_files;
+	sector_t f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
new file mode 100644
index 000000000000..b3a2cadf90f2
--- /dev/null
+++ b/include/linux/stddef.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_STDDEF_H
+#define _LINUX_STDDEF_H
+
+#include <linux/compiler.h>
+
+#undef NULL
+#if defined(__cplusplus)
+#define NULL 0
+#else
+#define NULL ((void *)0)
+#endif
+
+#undef offsetof
+#ifdef __compiler_offsetof
+#define offsetof(TYPE,MEMBER) __compiler_offsetof(TYPE,MEMBER)
+#else
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#endif
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
new file mode 100644
index 000000000000..151a803ed0ed
--- /dev/null
+++ b/include/linux/stop_machine.h
@@ -0,0 +1,52 @@
+#ifndef _LINUX_STOP_MACHINE
+#define _LINUX_STOP_MACHINE
+/* "Bogolock": stop the entire machine, disable interrupts.  This is a
+   very heavy lock, which is equivalent to grabbing every spinlock
+   (and more).  So the "read" side to such a lock is anything which
+   diables preeempt. */
+#include <linux/config.h>
+#include <linux/cpu.h>
+#include <asm/system.h>
+
+#if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+/**
+ * stop_machine_run: freeze the machine on all CPUs and run this function
+ * @fn: the function to run
+ * @data: the data ptr for the @fn()
+ * @cpu: the cpu to run @fn() on (or any, if @cpu == NR_CPUS.
+ *
+ * Description: This causes a thread to be scheduled on every other cpu,
+ * each of which disables interrupts, and finally interrupts are disabled
+ * on the current CPU.  The result is that noone is holding a spinlock
+ * or inside any other preempt-disabled region when @fn() runs.
+ *
+ * This can be thought of as a very heavy write lock, equivalent to
+ * grabbing every spinlock in the kernel. */
+int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu);
+
+/**
+ * __stop_machine_run: freeze the machine on all CPUs and run this function
+ * @fn: the function to run
+ * @data: the data ptr for the @fn
+ * @cpu: the cpu to run @fn on (or any, if @cpu == NR_CPUS.
+ *
+ * Description: This is a special version of the above, which returns the
+ * thread which has run @fn(): kthread_stop will return the return value
+ * of @fn().  Used by hotplug cpu.
+ */
+struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
+				       unsigned int cpu);
+
+#else
+
+static inline int stop_machine_run(int (*fn)(void *), void *data,
+				   unsigned int cpu)
+{
+	int ret;
+	local_irq_disable();
+	ret = fn(data);
+	local_irq_enable();
+	return ret;
+}
+#endif /* CONFIG_SMP */
+#endif /* _LINUX_STOP_MACHINE */
diff --git a/include/linux/string.h b/include/linux/string.h
new file mode 100644
index 000000000000..b9fc59469956
--- /dev/null
+++ b/include/linux/string.h
@@ -0,0 +1,96 @@
+#ifndef _LINUX_STRING_H_
+#define _LINUX_STRING_H_
+
+/* We don't want strings.h stuff being user by user stuff by accident */
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>	/* for inline */
+#include <linux/types.h>	/* for size_t */
+#include <linux/stddef.h>	/* for NULL */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern char * strpbrk(const char *,const char *);
+extern char * strsep(char **,const char *);
+extern __kernel_size_t strspn(const char *,const char *);
+extern __kernel_size_t strcspn(const char *,const char *);
+
+/*
+ * Include machine specific inline routines
+ */
+#include <asm/string.h>
+
+#ifndef __HAVE_ARCH_STRCPY
+extern char * strcpy(char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCPY
+extern char * strncpy(char *,const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRLCPY
+size_t strlcpy(char *, const char *, size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCAT
+extern char * strcat(char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCAT
+extern char * strncat(char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRLCAT
+extern size_t strlcat(char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCMP
+extern int strcmp(const char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *,const char *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRNICMP
+extern int strnicmp(const char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCHR
+extern char * strchr(const char *,int);
+#endif
+#ifndef __HAVE_ARCH_STRNCHR
+extern char * strnchr(const char *, size_t, int);
+#endif
+#ifndef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char *,int);
+#endif
+#ifndef __HAVE_ARCH_STRSTR
+extern char * strstr(const char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNLEN
+extern __kernel_size_t strnlen(const char *,__kernel_size_t);
+#endif
+
+#ifndef __HAVE_ARCH_MEMSET
+extern void * memset(void *,int,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMSCAN
+extern void * memscan(void *,int,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *,int,__kernel_size_t);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/stringify.h b/include/linux/stringify.h
new file mode 100644
index 000000000000..0b4388356c87
--- /dev/null
+++ b/include/linux/stringify.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_STRINGIFY_H
+#define __LINUX_STRINGIFY_H
+
+/* Indirect stringification.  Doing two levels allows the parameter to be a
+ * macro itself.  For example, compile with -DFOO=bar, __stringify(FOO)
+ * converts to "bar".
+ */
+
+#define __stringify_1(x)	#x
+#define __stringify(x)		__stringify_1(x)
+
+#endif	/* !__LINUX_STRINGIFY_H */
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
new file mode 100644
index 000000000000..04ebc24db348
--- /dev/null
+++ b/include/linux/sunrpc/auth.h
@@ -0,0 +1,149 @@
+/*
+ * linux/include/linux/sunrpc/auth.h
+ *
+ * Declarations for the RPC client authentication machinery.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_AUTH_H
+#define _LINUX_SUNRPC_AUTH_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/xdr.h>
+
+#include <asm/atomic.h>
+
+/* size of the nodename buffer */
+#define UNX_MAXNODENAME	32
+
+/* Maximum size (in bytes) of an rpc credential or verifier */
+#define RPC_MAX_AUTH_SIZE (400)
+
+/* Work around the lack of a VFS credential */
+struct auth_cred {
+	uid_t	uid;
+	gid_t	gid;
+	struct group_info *group_info;
+};
+
+/*
+ * Client user credentials
+ */
+struct rpc_cred {
+	struct hlist_node	cr_hash;	/* hash chain */
+	struct rpc_credops *	cr_ops;
+	unsigned long		cr_expire;	/* when to gc */
+	atomic_t		cr_count;	/* ref count */
+	unsigned short		cr_flags;	/* various flags */
+#ifdef RPC_DEBUG
+	unsigned long		cr_magic;	/* 0x0f4aa4f0 */
+#endif
+
+	uid_t			cr_uid;
+
+	/* per-flavor data */
+};
+#define RPCAUTH_CRED_LOCKED	0x0001
+#define RPCAUTH_CRED_UPTODATE	0x0002
+
+#define RPCAUTH_CRED_MAGIC	0x0f4aa4f0
+
+/*
+ * Client authentication handle
+ */
+#define RPC_CREDCACHE_NR	8
+#define RPC_CREDCACHE_MASK	(RPC_CREDCACHE_NR - 1)
+struct rpc_cred_cache {
+	struct hlist_head	hashtable[RPC_CREDCACHE_NR];
+	unsigned long		nextgc;		/* next garbage collection */
+	unsigned long		expire;		/* cache expiry interval */
+};
+
+struct rpc_auth {
+	unsigned int		au_cslack;	/* call cred size estimate */
+	unsigned int		au_rslack;	/* reply verf size guess */
+	unsigned int		au_flags;	/* various flags */
+	struct rpc_authops *	au_ops;		/* operations */
+	rpc_authflavor_t	au_flavor;	/* pseudoflavor (note may
+						 * differ from the flavor in
+						 * au_ops->au_flavor in gss
+						 * case) */
+	atomic_t		au_count;	/* Reference counter */
+
+	struct rpc_cred_cache *	au_credcache;
+	/* per-flavor data */
+};
+#define RPC_AUTH_PROC_CREDS	0x0010		/* process creds (including
+						 * uid/gid, fs[ug]id, gids)
+						 */
+
+/*
+ * Client authentication ops
+ */
+struct rpc_authops {
+	struct module		*owner;
+	rpc_authflavor_t	au_flavor;	/* flavor (RPC_AUTH_*) */
+#ifdef RPC_DEBUG
+	char *			au_name;
+#endif
+	struct rpc_auth *	(*create)(struct rpc_clnt *, rpc_authflavor_t);
+	void			(*destroy)(struct rpc_auth *);
+
+	struct rpc_cred *	(*lookup_cred)(struct rpc_auth *, struct auth_cred *, int);
+	struct rpc_cred *	(*crcreate)(struct rpc_auth*, struct auth_cred *, int);
+};
+
+struct rpc_credops {
+	const char *		cr_name;	/* Name of the auth flavour */
+	void			(*crdestroy)(struct rpc_cred *);
+
+	int			(*crmatch)(struct auth_cred *, struct rpc_cred *, int);
+	u32 *			(*crmarshal)(struct rpc_task *, u32 *);
+	int			(*crrefresh)(struct rpc_task *);
+	u32 *			(*crvalidate)(struct rpc_task *, u32 *);
+	int			(*crwrap_req)(struct rpc_task *, kxdrproc_t,
+						void *, u32 *, void *);
+	int			(*crunwrap_resp)(struct rpc_task *, kxdrproc_t,
+						void *, u32 *, void *);
+};
+
+extern struct rpc_authops	authunix_ops;
+extern struct rpc_authops	authnull_ops;
+#ifdef CONFIG_SUNRPC_SECURE
+extern struct rpc_authops	authdes_ops;
+#endif
+
+int			rpcauth_register(struct rpc_authops *);
+int			rpcauth_unregister(struct rpc_authops *);
+struct rpc_auth *	rpcauth_create(rpc_authflavor_t, struct rpc_clnt *);
+void			rpcauth_destroy(struct rpc_auth *);
+struct rpc_cred *	rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int);
+struct rpc_cred *	rpcauth_lookupcred(struct rpc_auth *, int);
+struct rpc_cred *	rpcauth_bindcred(struct rpc_task *);
+void			rpcauth_holdcred(struct rpc_task *);
+void			put_rpccred(struct rpc_cred *);
+void			rpcauth_unbindcred(struct rpc_task *);
+u32 *			rpcauth_marshcred(struct rpc_task *, u32 *);
+u32 *			rpcauth_checkverf(struct rpc_task *, u32 *);
+int			rpcauth_wrap_req(struct rpc_task *task, kxdrproc_t encode, void *rqstp, u32 *data, void *obj);
+int			rpcauth_unwrap_resp(struct rpc_task *task, kxdrproc_t decode, void *rqstp, u32 *data, void *obj);
+int			rpcauth_refreshcred(struct rpc_task *);
+void			rpcauth_invalcred(struct rpc_task *);
+int			rpcauth_uptodatecred(struct rpc_task *);
+int			rpcauth_init_credcache(struct rpc_auth *, unsigned long);
+void			rpcauth_free_credcache(struct rpc_auth *);
+
+static inline
+struct rpc_cred *	get_rpccred(struct rpc_cred *cred)
+{
+	atomic_inc(&cred->cr_count);
+	return cred;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_AUTH_H */
diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h
new file mode 100644
index 000000000000..03084dc4bb6a
--- /dev/null
+++ b/include/linux/sunrpc/auth_gss.h
@@ -0,0 +1,97 @@
+/*
+ * linux/include/linux/auth_gss.h
+ *
+ * Declarations for RPCSEC_GSS
+ *
+ * Dug Song <dugsong@monkey.org>
+ * Andy Adamson <andros@umich.edu>
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2000 The Regents of the University of Michigan
+ *
+ * $Id$
+ */
+
+#ifndef _LINUX_SUNRPC_AUTH_GSS_H
+#define _LINUX_SUNRPC_AUTH_GSS_H
+
+#ifdef __KERNEL__
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/svc.h>
+#include <linux/sunrpc/gss_api.h>
+
+#define RPC_GSS_VERSION		1
+
+#define MAXSEQ 0x80000000 /* maximum legal sequence number, from rfc 2203 */
+
+enum rpc_gss_proc {
+	RPC_GSS_PROC_DATA = 0,
+	RPC_GSS_PROC_INIT = 1,
+	RPC_GSS_PROC_CONTINUE_INIT = 2,
+	RPC_GSS_PROC_DESTROY = 3
+};
+
+enum rpc_gss_svc {
+	RPC_GSS_SVC_NONE = 1,
+	RPC_GSS_SVC_INTEGRITY = 2,
+	RPC_GSS_SVC_PRIVACY = 3
+};
+
+/* on-the-wire gss cred: */
+struct rpc_gss_wire_cred {
+	u32			gc_v;		/* version */
+	u32			gc_proc;	/* control procedure */
+	u32			gc_seq;		/* sequence number */
+	u32			gc_svc;		/* service */
+	struct xdr_netobj	gc_ctx;		/* context handle */
+};
+
+/* on-the-wire gss verifier: */
+struct rpc_gss_wire_verf {
+	u32			gv_flavor;
+	struct xdr_netobj	gv_verf;
+};
+
+/* return from gss NULL PROC init sec context */
+struct rpc_gss_init_res {
+	struct xdr_netobj	gr_ctx;		/* context handle */
+	u32			gr_major;	/* major status */
+	u32			gr_minor;	/* minor status */
+	u32			gr_win;		/* sequence window */
+	struct xdr_netobj	gr_token;	/* token */
+};
+
+/* The gss_cl_ctx struct holds all the information the rpcsec_gss client
+ * code needs to know about a single security context.  In particular,
+ * gc_gss_ctx is the context handle that is used to do gss-api calls, while
+ * gc_wire_ctx is the context handle that is used to identify the context on
+ * the wire when communicating with a server. */
+
+struct gss_cl_ctx {
+	atomic_t		count;
+	enum rpc_gss_proc	gc_proc;
+	u32			gc_seq;
+	spinlock_t		gc_seq_lock;
+	struct gss_ctx		*gc_gss_ctx;
+	struct xdr_netobj	gc_wire_ctx;
+	u32			gc_win;
+	unsigned long		gc_expiry;
+};
+
+struct gss_upcall_msg;
+struct gss_cred {
+	struct rpc_cred		gc_base;
+	enum rpc_gss_svc	gc_service;
+	struct gss_cl_ctx	*gc_ctx;
+	struct gss_upcall_msg	*gc_upcall;
+};
+
+#define gc_uid			gc_base.cr_uid
+#define gc_count		gc_base.cr_count
+#define gc_flags		gc_base.cr_flags
+#define gc_expire		gc_base.cr_expire
+
+void print_hexl(u32 *p, u_int length, u_int offset);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_AUTH_GSS_H */
+
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
new file mode 100644
index 000000000000..6864063d1b9f
--- /dev/null
+++ b/include/linux/sunrpc/cache.h
@@ -0,0 +1,312 @@
+/*
+ * include/linux/sunrpc/cache.h
+ *
+ * Generic code for various authentication-related caches
+ * used by sunrpc clients and servers.
+ *
+ * Copyright (C) 2002 Neil Brown <neilb@cse.unsw.edu.au>
+ *
+ * Released under terms in GPL version 2.  See COPYING.
+ *
+ */
+
+#ifndef _LINUX_SUNRPC_CACHE_H_
+#define _LINUX_SUNRPC_CACHE_H_
+
+#include <linux/slab.h>
+#include <asm/atomic.h>
+#include <linux/proc_fs.h>
+
+/*
+ * Each cache requires:
+ *  - A 'struct cache_detail' which contains information specific to the cache
+ *    for common code to use.
+ *  - An item structure that must contain a "struct cache_head"
+ *  - A lookup function defined using DefineCacheLookup
+ *  - A 'put' function that can release a cache item. It will only
+ *    be called after cache_put has succeed, so there are guarantee
+ *    to be no references.
+ *  - A function to calculate a hash of an item's key.
+ *
+ * as well as assorted code fragments (e.g. compare keys) and numbers
+ * (e.g. hash size, goal_age, etc).
+ *
+ * Each cache must be registered so that it can be cleaned regularly.
+ * When the cache is unregistered, it is flushed completely.
+ *
+ * Entries have a ref count and a 'hashed' flag which counts the existance
+ * in the hash table.
+ * We only expire entries when refcount is zero.
+ * Existance in the cache is counted  the refcount.
+ */
+
+/* Every cache item has a common header that is used
+ * for expiring and refreshing entries.
+ * 
+ */
+struct cache_head {
+	struct cache_head * next;
+	time_t		expiry_time;	/* After time time, don't use the data */
+	time_t		last_refresh;   /* If CACHE_PENDING, this is when upcall 
+					 * was sent, else this is when update was received
+					 */
+	atomic_t 	refcnt;
+	unsigned long	flags;
+};
+#define	CACHE_VALID	0	/* Entry contains valid data */
+#define	CACHE_NEGATIVE	1	/* Negative entry - there is no match for the key */
+#define	CACHE_PENDING	2	/* An upcall has been sent but no reply received yet*/
+
+#define	CACHE_NEW_EXPIRY 120	/* keep new things pending confirmation for 120 seconds */
+
+struct cache_detail {
+	int			hash_size;
+	struct cache_head **	hash_table;
+	rwlock_t		hash_lock;
+
+	atomic_t		inuse; /* active user-space update or lookup */
+
+	char			*name;
+	void			(*cache_put)(struct cache_head *,
+					     struct cache_detail*);
+
+	void			(*cache_request)(struct cache_detail *cd,
+						 struct cache_head *h,
+						 char **bpp, int *blen);
+	int			(*cache_parse)(struct cache_detail *,
+					       char *buf, int len);
+
+	int			(*cache_show)(struct seq_file *m,
+					      struct cache_detail *cd,
+					      struct cache_head *h);
+
+	/* fields below this comment are for internal use
+	 * and should not be touched by cache owners
+	 */
+	time_t			flush_time;		/* flush all cache items with last_refresh
+							 * earlier than this */
+	struct list_head	others;
+	time_t			nextcheck;
+	int			entries;
+
+	/* fields for communication over channel */
+	struct list_head	queue;
+	struct proc_dir_entry	*proc_ent;
+	struct proc_dir_entry   *flush_ent, *channel_ent, *content_ent;
+
+	atomic_t		readers;		/* how many time is /chennel open */
+	time_t			last_close;		/* if no readers, when did last close */
+	time_t			last_warn;		/* when we last warned about no readers */
+	void			(*warn_no_listener)(struct cache_detail *cd);
+};
+
+
+/* this must be embedded in any request structure that
+ * identifies an object that will want a callback on
+ * a cache fill
+ */
+struct cache_req {
+	struct cache_deferred_req *(*defer)(struct cache_req *req);
+};
+/* this must be embedded in a deferred_request that is being
+ * delayed awaiting cache-fill
+ */
+struct cache_deferred_req {
+	struct list_head	hash;	/* on hash chain */
+	struct list_head	recent; /* on fifo */
+	struct cache_head	*item;  /* cache item we wait on */
+	time_t			recv_time;
+	void			*owner; /* we might need to discard all defered requests
+					 * owned by someone */
+	void			(*revisit)(struct cache_deferred_req *req,
+					   int too_many);
+};
+
+/*
+ * just like a template in C++, this macro does cache lookup
+ * for us.
+ * The function is passed some sort of HANDLE from which a cache_detail
+ * structure can be determined (via SETUP, DETAIL), a template
+ * cache entry (type RTN*), and a "set" flag.  Using the HASHFN and the 
+ * TEST, the function will try to find a matching cache entry in the cache.
+ * If "set" == 0 :
+ *    If an entry is found, it is returned
+ *    If no entry is found, a new non-VALID entry is created.
+ * If "set" == 1 and INPLACE == 0 :
+ *    If no entry is found a new one is inserted with data from "template"
+ *    If a non-CACHE_VALID entry is found, it is updated from template using UPDATE
+ *    If a CACHE_VALID entry is found, a new entry is swapped in with data
+ *       from "template"
+ * If set == 1, and INPLACE == 1 :
+ *    As above, except that if a CACHE_VALID entry is found, we UPDATE in place
+ *       instead of swapping in a new entry.
+ *
+ * If the passed handle has the CACHE_NEGATIVE flag set, then UPDATE is not
+ * run but insteead CACHE_NEGATIVE is set in any new item.
+
+ *  In any case, the new entry is returned with a reference count.
+ *
+ *    
+ * RTN is a struct type for a cache entry
+ * MEMBER is the member of the cache which is cache_head, which must be first
+ * FNAME is the name for the function	
+ * ARGS are arguments to function and must contain RTN *item, int set.  May
+ *   also contain something to be usedby SETUP or DETAIL to find cache_detail.
+ * SETUP  locates the cache detail and makes it available as...
+ * DETAIL identifies the cache detail, possibly set up by SETUP
+ * HASHFN returns a hash value of the cache entry "item"
+ * TEST  tests if "tmp" matches "item"
+ * INIT copies key information from "item" to "new"
+ * UPDATE copies content information from "item" to "tmp"
+ * INPLACE is true if updates can happen inplace rather than allocating a new structure
+ *
+ * WARNING: any substantial changes to this must be reflected in
+ *   net/sunrpc/svcauth.c(auth_domain_lookup)
+ *  which is a similar routine that is open-coded.
+ */
+#define DefineCacheLookup(RTN,MEMBER,FNAME,ARGS,SETUP,DETAIL,HASHFN,TEST,INIT,UPDATE,INPLACE)	\
+RTN *FNAME ARGS										\
+{											\
+	RTN *tmp, *new=NULL;								\
+	struct cache_head **hp, **head;							\
+	SETUP;										\
+	head = &(DETAIL)->hash_table[HASHFN];						\
+ retry:											\
+	if (set||new) write_lock(&(DETAIL)->hash_lock);					\
+	else read_lock(&(DETAIL)->hash_lock);						\
+	for(hp=head; *hp != NULL; hp = &tmp->MEMBER.next) {				\
+		tmp = container_of(*hp, RTN, MEMBER);					\
+		if (TEST) { /* found a match */						\
+											\
+			if (set && !INPLACE && test_bit(CACHE_VALID, &tmp->MEMBER.flags) && !new) \
+				break;							\
+											\
+			if (new)							\
+				{INIT;}							\
+			if (set) {							\
+				if (!INPLACE && test_bit(CACHE_VALID, &tmp->MEMBER.flags))\
+				{ /* need to swap in new */				\
+					RTN *t2;					\
+											\
+					new->MEMBER.next = tmp->MEMBER.next;		\
+					*hp = &new->MEMBER;				\
+					tmp->MEMBER.next = NULL;			\
+					t2 = tmp; tmp = new; new = t2;			\
+				}							\
+				if (test_bit(CACHE_NEGATIVE,  &item->MEMBER.flags))	\
+					set_bit(CACHE_NEGATIVE, &tmp->MEMBER.flags);	\
+				else {							\
+					UPDATE;						\
+					clear_bit(CACHE_NEGATIVE, &tmp->MEMBER.flags);	\
+				}							\
+			}								\
+			cache_get(&tmp->MEMBER);					\
+			if (set||new) write_unlock(&(DETAIL)->hash_lock);		\
+			else read_unlock(&(DETAIL)->hash_lock);				\
+			if (set)							\
+				cache_fresh(DETAIL, &tmp->MEMBER, item->MEMBER.expiry_time); \
+			if (set && !INPLACE && new) cache_fresh(DETAIL, &new->MEMBER, 0);	\
+			if (new) (DETAIL)->cache_put(&new->MEMBER, DETAIL);		\
+			return tmp;							\
+		}									\
+	}										\
+	/* Didn't find anything */							\
+	if (new) {									\
+		INIT;									\
+		new->MEMBER.next = *head;						\
+		*head = &new->MEMBER;							\
+		(DETAIL)->entries ++;							\
+		cache_get(&new->MEMBER);						\
+		if (set) {								\
+			tmp = new;							\
+			if (test_bit(CACHE_NEGATIVE, &item->MEMBER.flags))		\
+				set_bit(CACHE_NEGATIVE, &tmp->MEMBER.flags);		\
+			else {UPDATE;}							\
+		}									\
+	}										\
+	if (set||new) write_unlock(&(DETAIL)->hash_lock);				\
+	else read_unlock(&(DETAIL)->hash_lock);						\
+	if (new && set)									\
+		cache_fresh(DETAIL, &new->MEMBER, item->MEMBER.expiry_time);		\
+	if (new)				       					\
+		return new;								\
+	new = kmalloc(sizeof(*new), GFP_KERNEL);					\
+	if (new) {									\
+		cache_init(&new->MEMBER);						\
+		goto retry;								\
+	}										\
+	return NULL;									\
+}
+
+#define DefineSimpleCacheLookup(STRUCT,INPLACE)	\
+	DefineCacheLookup(struct STRUCT, h, STRUCT##_lookup, (struct STRUCT *item, int set), /*no setup */,	\
+			  & STRUCT##_cache, STRUCT##_hash(item), STRUCT##_match(item, tmp),\
+			  STRUCT##_init(new, item), STRUCT##_update(tmp, item),INPLACE)
+
+#define cache_for_each(pos, detail, index, member) 						\
+	for (({read_lock(&(detail)->hash_lock); index = (detail)->hash_size;}) ;		\
+	     ({if (index==0)read_unlock(&(detail)->hash_lock); index--;});			\
+		)										\
+		for (pos = container_of((detail)->hash_table[index], typeof(*pos), member);	\
+		     &pos->member;								\
+		     pos = container_of(pos->member.next, typeof(*pos), member))
+
+	     
+
+extern void cache_clean_deferred(void *owner);
+
+static inline struct cache_head  *cache_get(struct cache_head *h)
+{
+	atomic_inc(&h->refcnt);
+	return h;
+}
+
+
+static inline int cache_put(struct cache_head *h, struct cache_detail *cd)
+{
+	if (atomic_read(&h->refcnt) <= 2 &&
+	    h->expiry_time < cd->nextcheck)
+		cd->nextcheck = h->expiry_time;
+	return atomic_dec_and_test(&h->refcnt);
+}
+
+extern void cache_init(struct cache_head *h);
+extern void cache_fresh(struct cache_detail *detail,
+			struct cache_head *head, time_t expiry);
+extern int cache_check(struct cache_detail *detail,
+		       struct cache_head *h, struct cache_req *rqstp);
+extern void cache_flush(void);
+extern void cache_purge(struct cache_detail *detail);
+#define NEVER (0x7FFFFFFF)
+extern void cache_register(struct cache_detail *cd);
+extern int cache_unregister(struct cache_detail *cd);
+
+extern void qword_add(char **bpp, int *lp, char *str);
+extern void qword_addhex(char **bpp, int *lp, char *buf, int blen);
+extern int qword_get(char **bpp, char *dest, int bufsize);
+
+static inline int get_int(char **bpp, int *anint)
+{
+	char buf[50];
+	char *ep;
+	int rv;
+	int len = qword_get(bpp, buf, 50);
+	if (len < 0) return -EINVAL;
+	if (len ==0) return -ENOENT;
+	rv = simple_strtol(buf, &ep, 0);
+	if (*ep) return -EINVAL;
+	*anint = rv;
+	return 0;
+}
+
+static inline time_t get_expiry(char **bpp)
+{
+	int rv;
+	if (get_int(bpp, &rv))
+		return 0;
+	if (rv < 0)
+		return 0;
+	return rv;
+}
+
+#endif /*  _LINUX_SUNRPC_CACHE_H_ */
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
new file mode 100644
index 000000000000..2709caf4d128
--- /dev/null
+++ b/include/linux/sunrpc/clnt.h
@@ -0,0 +1,153 @@
+/*
+ *  linux/include/linux/sunrpc/clnt.h
+ *
+ *  Declarations for the high-level RPC client interface
+ *
+ *  Copyright (C) 1995, 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_CLNT_H
+#define _LINUX_SUNRPC_CLNT_H
+
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/xprt.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/stats.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/timer.h>
+#include <asm/signal.h>
+
+/*
+ * This defines an RPC port mapping
+ */
+struct rpc_portmap {
+	__u32			pm_prog;
+	__u32			pm_vers;
+	__u32			pm_prot;
+	__u16			pm_port;
+	unsigned char		pm_binding : 1;	/* doing a getport() */
+	struct rpc_wait_queue	pm_bindwait;	/* waiting on getport() */
+};
+
+struct rpc_inode;
+
+/*
+ * The high-level client handle
+ */
+struct rpc_clnt {
+	atomic_t		cl_count;	/* Number of clones */
+	atomic_t		cl_users;	/* number of references */
+	struct rpc_xprt *	cl_xprt;	/* transport */
+	struct rpc_procinfo *	cl_procinfo;	/* procedure info */
+	u32			cl_maxproc;	/* max procedure number */
+
+	char *			cl_server;	/* server machine name */
+	char *			cl_protname;	/* protocol name */
+	struct rpc_auth *	cl_auth;	/* authenticator */
+	struct rpc_stat *	cl_stats;	/* statistics */
+
+	unsigned int		cl_softrtry : 1,/* soft timeouts */
+				cl_intr     : 1,/* interruptible */
+				cl_chatty   : 1,/* be verbose */
+				cl_autobind : 1,/* use getport() */
+				cl_oneshot  : 1,/* dispose after use */
+				cl_dead     : 1;/* abandoned */
+
+	struct rpc_rtt *	cl_rtt;		/* RTO estimator data */
+	struct rpc_portmap *	cl_pmap;	/* port mapping */
+
+	int			cl_nodelen;	/* nodename length */
+	char 			cl_nodename[UNX_MAXNODENAME];
+	char			cl_pathname[30];/* Path in rpc_pipe_fs */
+	struct dentry *		cl_dentry;	/* inode */
+	struct rpc_clnt *	cl_parent;	/* Points to parent of clones */
+	struct rpc_rtt		cl_rtt_default;
+	struct rpc_portmap	cl_pmap_default;
+	char			cl_inline_name[32];
+};
+#define cl_timeout		cl_xprt->timeout
+#define cl_prog			cl_pmap->pm_prog
+#define cl_vers			cl_pmap->pm_vers
+#define cl_port			cl_pmap->pm_port
+#define cl_prot			cl_pmap->pm_prot
+
+/*
+ * General RPC program info
+ */
+#define RPC_MAXVERSION		4
+struct rpc_program {
+	char *			name;		/* protocol name */
+	u32			number;		/* program number */
+	unsigned int		nrvers;		/* number of versions */
+	struct rpc_version **	version;	/* version array */
+	struct rpc_stat *	stats;		/* statistics */
+	char *			pipe_dir_name;	/* path to rpc_pipefs dir */
+};
+
+struct rpc_version {
+	u32			number;		/* version number */
+	unsigned int		nrprocs;	/* number of procs */
+	struct rpc_procinfo *	procs;		/* procedure array */
+};
+
+/*
+ * Procedure information
+ */
+struct rpc_procinfo {
+	u32			p_proc;		/* RPC procedure number */
+	kxdrproc_t		p_encode;	/* XDR encode function */
+	kxdrproc_t		p_decode;	/* XDR decode function */
+	unsigned int		p_bufsiz;	/* req. buffer size */
+	unsigned int		p_count;	/* call count */
+	unsigned int		p_timer;	/* Which RTT timer to use */
+};
+
+#define RPC_CONGESTED(clnt)	(RPCXPRT_CONGESTED((clnt)->cl_xprt))
+#define RPC_PEERADDR(clnt)	(&(clnt)->cl_xprt->addr)
+
+#ifdef __KERNEL__
+
+struct rpc_clnt *rpc_create_client(struct rpc_xprt *xprt, char *servname,
+				struct rpc_program *info,
+				u32 version, rpc_authflavor_t authflavor);
+struct rpc_clnt *rpc_clone_client(struct rpc_clnt *);
+int		rpc_shutdown_client(struct rpc_clnt *);
+int		rpc_destroy_client(struct rpc_clnt *);
+void		rpc_release_client(struct rpc_clnt *);
+void		rpc_getport(struct rpc_task *, struct rpc_clnt *);
+int		rpc_register(u32, u32, int, unsigned short, int *);
+
+void		rpc_call_setup(struct rpc_task *, struct rpc_message *, int);
+
+int		rpc_call_async(struct rpc_clnt *clnt, struct rpc_message *msg,
+			       int flags, rpc_action callback, void *clntdata);
+int		rpc_call_sync(struct rpc_clnt *clnt, struct rpc_message *msg,
+			      int flags);
+void		rpc_restart_call(struct rpc_task *);
+void		rpc_clnt_sigmask(struct rpc_clnt *clnt, sigset_t *oldset);
+void		rpc_clnt_sigunmask(struct rpc_clnt *clnt, sigset_t *oldset);
+void		rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int);
+size_t		rpc_max_payload(struct rpc_clnt *);
+
+static __inline__
+int rpc_call(struct rpc_clnt *clnt, u32 proc, void *argp, void *resp, int flags)
+{
+	struct rpc_message msg = {
+		.rpc_proc	= &clnt->cl_procinfo[proc],
+		.rpc_argp	= argp,
+		.rpc_resp	= resp,
+		.rpc_cred	= NULL
+	};
+	return rpc_call_sync(clnt, &msg, flags);
+}
+		
+extern void rpciod_wake_up(void);
+
+/*
+ * Helper function for NFSroot support
+ */
+int		rpc_getport_external(struct sockaddr_in *, __u32, __u32, int);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h
new file mode 100644
index 000000000000..eadb31e3c198
--- /dev/null
+++ b/include/linux/sunrpc/debug.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/linux/sunrpc/debug.h
+ *
+ * Debugging support for sunrpc module
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_DEBUG_H_
+#define _LINUX_SUNRPC_DEBUG_H_
+
+#include <linux/config.h>
+
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+/*
+ * Enable RPC debugging/profiling.
+ */
+#ifdef CONFIG_SYSCTL
+#define  RPC_DEBUG
+#endif
+/* #define  RPC_PROFILE */
+
+/*
+ * RPC debug facilities
+ */
+#define RPCDBG_XPRT		0x0001
+#define RPCDBG_CALL		0x0002
+#define RPCDBG_DEBUG		0x0004
+#define RPCDBG_NFS		0x0008
+#define RPCDBG_AUTH		0x0010
+#define RPCDBG_PMAP		0x0020
+#define RPCDBG_SCHED		0x0040
+#define RPCDBG_SVCSOCK		0x0100
+#define RPCDBG_SVCDSP		0x0200
+#define RPCDBG_MISC		0x0400
+#define RPCDBG_CACHE		0x0800
+#define RPCDBG_ALL		0x7fff
+
+#ifdef __KERNEL__
+
+/*
+ * Debugging macros etc
+ */
+#ifdef RPC_DEBUG
+extern unsigned int		rpc_debug;
+extern unsigned int		nfs_debug;
+extern unsigned int		nfsd_debug;
+extern unsigned int		nlm_debug;
+#endif
+
+#define dprintk(args...)	dfprintk(FACILITY, ## args)
+
+#undef ifdebug
+#ifdef RPC_DEBUG			
+# define ifdebug(fac)		if (unlikely(rpc_debug & RPCDBG_##fac))
+# define dfprintk(fac, args...)	do { ifdebug(fac) printk(args); } while(0)
+# define RPC_IFDEBUG(x)		x
+#else
+# define ifdebug(fac)		if (0)
+# define dfprintk(fac, args...)	do ; while (0)
+# define RPC_IFDEBUG(x)
+#endif
+
+#ifdef RPC_PROFILE
+# define pprintk(args...)	printk(## args)
+#else
+# define pprintk(args...)	do ; while (0)
+#endif
+
+/*
+ * Sysctl interface for RPC debugging
+ */
+#ifdef RPC_DEBUG
+void		rpc_register_sysctl(void);
+void		rpc_unregister_sysctl(void);
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * Declarations for the sysctl debug interface, which allows to read or
+ * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc
+ * module currently registers its sysctl table dynamically, the sysctl path
+ * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>.
+ */
+#define CTL_SUNRPC	7249	/* arbitrary and hopefully unused */
+
+enum {
+	CTL_RPCDEBUG = 1,
+	CTL_NFSDEBUG,
+	CTL_NFSDDEBUG,
+	CTL_NLMDEBUG,
+	CTL_SLOTTABLE_UDP,
+	CTL_SLOTTABLE_TCP,
+};
+
+#endif /* _LINUX_SUNRPC_DEBUG_H_ */
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
new file mode 100644
index 000000000000..689262f63059
--- /dev/null
+++ b/include/linux/sunrpc/gss_api.h
@@ -0,0 +1,122 @@
+/*
+ * linux/include/linux/gss_api.h
+ *
+ * Somewhat simplified version of the gss api.
+ *
+ * Dug Song <dugsong@monkey.org>
+ * Andy Adamson <andros@umich.edu>
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2000 The Regents of the University of Michigan
+ *
+ * $Id$
+ */
+
+#ifndef _LINUX_SUNRPC_GSS_API_H
+#define _LINUX_SUNRPC_GSS_API_H
+
+#ifdef __KERNEL__
+#include <linux/sunrpc/xdr.h>
+#include <linux/uio.h>
+
+/* The mechanism-independent gss-api context: */
+struct gss_ctx {
+	struct gss_api_mech	*mech_type;
+	void			*internal_ctx_id;
+};
+
+#define GSS_C_NO_BUFFER		((struct xdr_netobj) 0)
+#define GSS_C_NO_CONTEXT	((struct gss_ctx *) 0)
+#define GSS_C_NULL_OID		((struct xdr_netobj) 0)
+
+/*XXX  arbitrary length - is this set somewhere? */
+#define GSS_OID_MAX_LEN 32
+
+/* gss-api prototypes; note that these are somewhat simplified versions of
+ * the prototypes specified in RFC 2744. */
+int gss_import_sec_context(
+		const void*		input_token,
+		size_t			bufsize,
+		struct gss_api_mech	*mech,
+		struct gss_ctx		**ctx_id);
+u32 gss_get_mic(
+		struct gss_ctx		*ctx_id,
+		u32			qop,
+		struct xdr_buf		*message,
+		struct xdr_netobj	*mic_token);
+u32 gss_verify_mic(
+		struct gss_ctx		*ctx_id,
+		struct xdr_buf		*message,
+		struct xdr_netobj	*mic_token,
+		u32			*qstate);
+u32 gss_delete_sec_context(
+		struct gss_ctx		**ctx_id);
+
+u32 gss_pseudoflavor_to_service(struct gss_api_mech *, u32 pseudoflavor);
+char *gss_service_to_auth_domain_name(struct gss_api_mech *, u32 service);
+
+struct pf_desc {
+	u32	pseudoflavor;
+	u32	qop;
+	u32	service;
+	char	*name;
+	char	*auth_domain_name;
+};
+
+/* Different mechanisms (e.g., krb5 or spkm3) may implement gss-api, and
+ * mechanisms may be dynamically registered or unregistered by modules. */
+
+/* Each mechanism is described by the following struct: */
+struct gss_api_mech {
+	struct list_head	gm_list;
+	struct module		*gm_owner;
+	struct xdr_netobj	gm_oid;
+	char			*gm_name;
+	struct gss_api_ops	*gm_ops;
+	/* pseudoflavors supported by this mechanism: */
+	int			gm_pf_num;
+	struct pf_desc *	gm_pfs;
+};
+
+/* and must provide the following operations: */
+struct gss_api_ops {
+	int (*gss_import_sec_context)(
+			const void		*input_token,
+			size_t			bufsize,
+			struct gss_ctx		*ctx_id);
+	u32 (*gss_get_mic)(
+			struct gss_ctx		*ctx_id,
+			u32			qop, 
+			struct xdr_buf		*message,
+			struct xdr_netobj	*mic_token);
+	u32 (*gss_verify_mic)(
+			struct gss_ctx		*ctx_id,
+			struct xdr_buf		*message,
+			struct xdr_netobj	*mic_token,
+			u32			*qstate);
+	void (*gss_delete_sec_context)(
+			void			*internal_ctx_id);
+};
+
+int gss_mech_register(struct gss_api_mech *);
+void gss_mech_unregister(struct gss_api_mech *);
+
+/* returns a mechanism descriptor given an OID, and increments the mechanism's
+ * reference count. */
+struct gss_api_mech * gss_mech_get_by_OID(struct xdr_netobj *);
+
+/* Returns a reference to a mechanism, given a name like "krb5" etc. */
+struct gss_api_mech *gss_mech_get_by_name(const char *);
+
+/* Similar, but get by pseudoflavor. */
+struct gss_api_mech *gss_mech_get_by_pseudoflavor(u32);
+
+/* Just increments the mechanism's reference count and returns its input: */
+struct gss_api_mech * gss_mech_get(struct gss_api_mech *);
+
+/* For every succesful gss_mech_get or gss_mech_get_by_* call there must be a
+ * corresponding call to gss_mech_put. */
+void gss_mech_put(struct gss_api_mech *);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_GSS_API_H */
+
diff --git a/include/linux/sunrpc/gss_asn1.h b/include/linux/sunrpc/gss_asn1.h
new file mode 100644
index 000000000000..3ccecd0ad229
--- /dev/null
+++ b/include/linux/sunrpc/gss_asn1.h
@@ -0,0 +1,81 @@
+/*
+ *  linux/include/linux/sunrpc/gss_asn1.h
+ *
+ *  minimal asn1 for generic encoding/decoding of gss tokens
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
+ *  lib/gssapi/krb5/gssapiP_krb5.h, and others
+ *
+ *  Copyright (c) 2000 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+/*
+ * Copyright 1995 by the Massachusetts Institute of Technology.
+ * All Rights Reserved.
+ *
+ * Export of this software from the United States of America may
+ *   require a specific license from the United States Government.
+ *   It is the responsibility of any person or organization contemplating
+ *   export to obtain such a license before exporting.
+ *
+ * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
+ * distribute this software and its documentation for any purpose and
+ * without fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright notice and
+ * this permission notice appear in supporting documentation, and that
+ * the name of M.I.T. not be used in advertising or publicity pertaining
+ * to distribution of the software without specific, written prior
+ * permission.  Furthermore if you modify this software you must label
+ * your software as modified software and not distribute it in such a
+ * fashion that it might be confused with the original M.I.T. software.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is" without express
+ * or implied warranty.
+ *
+ */
+
+
+#include <linux/sunrpc/gss_api.h>
+
+#define SIZEOF_INT 4
+
+/* from gssapi_err_generic.h */
+#define G_BAD_SERVICE_NAME                       (-2045022976L)
+#define G_BAD_STRING_UID                         (-2045022975L)
+#define G_NOUSER                                 (-2045022974L)
+#define G_VALIDATE_FAILED                        (-2045022973L)
+#define G_BUFFER_ALLOC                           (-2045022972L)
+#define G_BAD_MSG_CTX                            (-2045022971L)
+#define G_WRONG_SIZE                             (-2045022970L)
+#define G_BAD_USAGE                              (-2045022969L)
+#define G_UNKNOWN_QOP                            (-2045022968L)
+#define G_NO_HOSTNAME                            (-2045022967L)
+#define G_BAD_HOSTNAME                           (-2045022966L)
+#define G_WRONG_MECH                             (-2045022965L)
+#define G_BAD_TOK_HEADER                         (-2045022964L)
+#define G_BAD_DIRECTION                          (-2045022963L)
+#define G_TOK_TRUNC                              (-2045022962L)
+#define G_REFLECT                                (-2045022961L)
+#define G_WRONG_TOKID                            (-2045022960L)
+
+#define g_OID_equal(o1,o2) \
+   (((o1)->len == (o2)->len) && \
+    (memcmp((o1)->data,(o2)->data,(int) (o1)->len) == 0))
+
+u32 g_verify_token_header(
+     struct xdr_netobj *mech,
+     int *body_size,
+     unsigned char **buf_in,
+     int toksize);
+
+int g_token_size(
+     struct xdr_netobj *mech,
+     unsigned int body_size);
+
+void g_make_token_header(
+     struct xdr_netobj *mech,
+     int body_size,
+     unsigned char **buf);
diff --git a/include/linux/sunrpc/gss_err.h b/include/linux/sunrpc/gss_err.h
new file mode 100644
index 000000000000..92608a2e574c
--- /dev/null
+++ b/include/linux/sunrpc/gss_err.h
@@ -0,0 +1,177 @@
+/*
+ *  linux/include/sunrpc/gss_err.h
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 include/gssapi/gssapi.h
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+/*
+ * Copyright 1993 by OpenVision Technologies, Inc.
+ * 
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appears in all copies and
+ * that both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of OpenVision not be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission. OpenVision makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ * 
+ * OPENVISION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL OPENVISION BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_SUNRPC_GSS_ERR_H
+#define _LINUX_SUNRPC_GSS_ERR_H
+
+#ifdef __KERNEL__
+
+typedef unsigned int OM_uint32;
+
+/*
+ * Flag bits for context-level services.
+ */
+#define GSS_C_DELEG_FLAG 1
+#define GSS_C_MUTUAL_FLAG 2
+#define GSS_C_REPLAY_FLAG 4
+#define GSS_C_SEQUENCE_FLAG 8
+#define GSS_C_CONF_FLAG 16
+#define GSS_C_INTEG_FLAG 32
+#define	GSS_C_ANON_FLAG 64
+#define GSS_C_PROT_READY_FLAG 128
+#define GSS_C_TRANS_FLAG 256
+
+/*
+ * Credential usage options
+ */
+#define GSS_C_BOTH 0
+#define GSS_C_INITIATE 1
+#define GSS_C_ACCEPT 2
+
+/*
+ * Status code types for gss_display_status
+ */
+#define GSS_C_GSS_CODE 1
+#define GSS_C_MECH_CODE 2
+
+
+/*
+ * Define the default Quality of Protection for per-message services.  Note
+ * that an implementation that offers multiple levels of QOP may either reserve
+ * a value (for example zero, as assumed here) to mean "default protection", or
+ * alternatively may simply equate GSS_C_QOP_DEFAULT to a specific explicit
+ * QOP value.  However a value of 0 should always be interpreted by a GSSAPI
+ * implementation as a request for the default protection level.
+ */
+#define GSS_C_QOP_DEFAULT 0
+
+/*
+ * Expiration time of 2^32-1 seconds means infinite lifetime for a
+ * credential or security context
+ */
+#define GSS_C_INDEFINITE ((OM_uint32) 0xfffffffful)
+
+
+/* Major status codes */
+
+#define GSS_S_COMPLETE 0
+
+/*
+ * Some "helper" definitions to make the status code macros obvious.
+ */
+#define GSS_C_CALLING_ERROR_OFFSET 24
+#define GSS_C_ROUTINE_ERROR_OFFSET 16
+#define GSS_C_SUPPLEMENTARY_OFFSET 0
+#define GSS_C_CALLING_ERROR_MASK ((OM_uint32) 0377ul)
+#define GSS_C_ROUTINE_ERROR_MASK ((OM_uint32) 0377ul)
+#define GSS_C_SUPPLEMENTARY_MASK ((OM_uint32) 0177777ul)
+
+/*
+ * The macros that test status codes for error conditions.  Note that the
+ * GSS_ERROR() macro has changed slightly from the V1 GSSAPI so that it now
+ * evaluates its argument only once.
+ */
+#define GSS_CALLING_ERROR(x) \
+  ((x) & (GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET))
+#define GSS_ROUTINE_ERROR(x) \
+  ((x) & (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET))
+#define GSS_SUPPLEMENTARY_INFO(x) \
+  ((x) & (GSS_C_SUPPLEMENTARY_MASK << GSS_C_SUPPLEMENTARY_OFFSET))
+#define GSS_ERROR(x) \
+  ((x) & ((GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET) | \
+	  (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET)))
+
+/*
+ * Now the actual status code definitions
+ */
+
+/*
+ * Calling errors:
+ */
+#define GSS_S_CALL_INACCESSIBLE_READ \
+                             (((OM_uint32) 1ul) << GSS_C_CALLING_ERROR_OFFSET)
+#define GSS_S_CALL_INACCESSIBLE_WRITE \
+                             (((OM_uint32) 2ul) << GSS_C_CALLING_ERROR_OFFSET)
+#define GSS_S_CALL_BAD_STRUCTURE \
+                             (((OM_uint32) 3ul) << GSS_C_CALLING_ERROR_OFFSET)
+
+/*
+ * Routine errors:
+ */
+#define GSS_S_BAD_MECH (((OM_uint32) 1ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_NAME (((OM_uint32) 2ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_NAMETYPE (((OM_uint32) 3ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_BINDINGS (((OM_uint32) 4ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_STATUS (((OM_uint32) 5ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_SIG (((OM_uint32) 6ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NO_CRED (((OM_uint32) 7ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NO_CONTEXT (((OM_uint32) 8ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DEFECTIVE_TOKEN (((OM_uint32) 9ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DEFECTIVE_CREDENTIAL \
+     (((OM_uint32) 10ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_CREDENTIALS_EXPIRED \
+     (((OM_uint32) 11ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_CONTEXT_EXPIRED \
+     (((OM_uint32) 12ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_FAILURE (((OM_uint32) 13ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_QOP (((OM_uint32) 14ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_UNAUTHORIZED (((OM_uint32) 15ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_UNAVAILABLE (((OM_uint32) 16ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DUPLICATE_ELEMENT \
+     (((OM_uint32) 17ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NAME_NOT_MN \
+     (((OM_uint32) 18ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+
+/*
+ * Supplementary info bits:
+ */
+#define GSS_S_CONTINUE_NEEDED (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 0))
+#define GSS_S_DUPLICATE_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 1))
+#define GSS_S_OLD_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 2))
+#define GSS_S_UNSEQ_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 3))
+#define GSS_S_GAP_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 4))
+
+/* XXXX these are not part of the GSSAPI C bindings!  (but should be) */
+
+#define GSS_CALLING_ERROR_FIELD(x) \
+   (((x) >> GSS_C_CALLING_ERROR_OFFSET) & GSS_C_CALLING_ERROR_MASK)
+#define GSS_ROUTINE_ERROR_FIELD(x) \
+   (((x) >> GSS_C_ROUTINE_ERROR_OFFSET) & GSS_C_ROUTINE_ERROR_MASK)
+#define GSS_SUPPLEMENTARY_INFO_FIELD(x) \
+   (((x) >> GSS_C_SUPPLEMENTARY_OFFSET) & GSS_C_SUPPLEMENTARY_MASK)
+
+/* XXXX This is a necessary evil until the spec is fixed */
+#define GSS_S_CRED_UNAVAIL GSS_S_FAILURE
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_SUNRPC_GSS_ERR_H */
diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h
new file mode 100644
index 000000000000..ffe31d2eb9ec
--- /dev/null
+++ b/include/linux/sunrpc/gss_krb5.h
@@ -0,0 +1,148 @@
+/*
+ *  linux/include/linux/sunrpc/gss_krb5_types.h
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
+ *  lib/gssapi/krb5/gssapiP_krb5.h, and others
+ *
+ *  Copyright (c) 2000 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ *  Bruce Fields   <bfields@umich.edu>
+ */
+
+/*
+ * Copyright 1995 by the Massachusetts Institute of Technology.
+ * All Rights Reserved.
+ *
+ * Export of this software from the United States of America may
+ *   require a specific license from the United States Government.
+ *   It is the responsibility of any person or organization contemplating
+ *   export to obtain such a license before exporting.
+ *
+ * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
+ * distribute this software and its documentation for any purpose and
+ * without fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright notice and
+ * this permission notice appear in supporting documentation, and that
+ * the name of M.I.T. not be used in advertising or publicity pertaining
+ * to distribution of the software without specific, written prior
+ * permission.  Furthermore if you modify this software you must label
+ * your software as modified software and not distribute it in such a
+ * fashion that it might be confused with the original M.I.T. software.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is" without express
+ * or implied warranty.
+ *
+ */
+
+#include <linux/sunrpc/auth_gss.h>
+#include <linux/sunrpc/gss_err.h>
+#include <linux/sunrpc/gss_asn1.h>
+
+struct krb5_ctx {
+	int			initiate; /* 1 = initiating, 0 = accepting */
+	int			seed_init;
+	unsigned char		seed[16];
+	int			signalg;
+	int			sealalg;
+	struct crypto_tfm	*enc;
+	struct crypto_tfm	*seq;
+	s32			endtime;
+	u32			seq_send;
+	struct xdr_netobj	mech_used;
+};
+
+#define KG_TOK_MIC_MSG    0x0101
+#define KG_TOK_WRAP_MSG   0x0201
+
+enum sgn_alg {
+	SGN_ALG_DES_MAC_MD5 = 0x0000,
+	SGN_ALG_MD2_5 = 0x0001,
+	SGN_ALG_DES_MAC = 0x0002,
+	SGN_ALG_3 = 0x0003,		/* not published */
+	SGN_ALG_HMAC_MD5 = 0x0011,	/* microsoft w2k; no support */
+	SGN_ALG_HMAC_SHA1_DES3_KD = 0x0004
+};
+enum seal_alg {
+	SEAL_ALG_NONE = 0xffff,
+	SEAL_ALG_DES = 0x0000,
+	SEAL_ALG_1 = 0x0001,		/* not published */
+	SEAL_ALG_MICROSOFT_RC4 = 0x0010,/* microsoft w2k; no support */
+	SEAL_ALG_DES3KD = 0x0002
+};
+
+#define KRB5_CKSUM_LENGTH 8
+
+#define CKSUMTYPE_CRC32			0x0001
+#define CKSUMTYPE_RSA_MD4		0x0002
+#define CKSUMTYPE_RSA_MD4_DES		0x0003
+#define CKSUMTYPE_DESCBC		0x0004
+#define CKSUMTYPE_RSA_MD5		0x0007
+#define CKSUMTYPE_RSA_MD5_DES		0x0008
+#define CKSUMTYPE_NIST_SHA		0x0009
+#define CKSUMTYPE_HMAC_SHA1_DES3	0x000c
+
+/* from gssapi_err_krb5.h */
+#define KG_CCACHE_NOMATCH                        (39756032L)
+#define KG_KEYTAB_NOMATCH                        (39756033L)
+#define KG_TGT_MISSING                           (39756034L)
+#define KG_NO_SUBKEY                             (39756035L)
+#define KG_CONTEXT_ESTABLISHED                   (39756036L)
+#define KG_BAD_SIGN_TYPE                         (39756037L)
+#define KG_BAD_LENGTH                            (39756038L)
+#define KG_CTX_INCOMPLETE                        (39756039L)
+#define KG_CONTEXT                               (39756040L)
+#define KG_CRED                                  (39756041L)
+#define KG_ENC_DESC                              (39756042L)
+#define KG_BAD_SEQ                               (39756043L)
+#define KG_EMPTY_CCACHE                          (39756044L)
+#define KG_NO_CTYPES                             (39756045L)
+
+/* per Kerberos v5 protocol spec crypto types from the wire. 
+ * these get mapped to linux kernel crypto routines.  
+ */
+#define ENCTYPE_NULL            0x0000
+#define ENCTYPE_DES_CBC_CRC     0x0001	/* DES cbc mode with CRC-32 */
+#define ENCTYPE_DES_CBC_MD4     0x0002	/* DES cbc mode with RSA-MD4 */
+#define ENCTYPE_DES_CBC_MD5     0x0003	/* DES cbc mode with RSA-MD5 */
+#define ENCTYPE_DES_CBC_RAW     0x0004	/* DES cbc mode raw */
+/* XXX deprecated? */
+#define ENCTYPE_DES3_CBC_SHA    0x0005	/* DES-3 cbc mode with NIST-SHA */
+#define ENCTYPE_DES3_CBC_RAW    0x0006	/* DES-3 cbc mode raw */
+#define ENCTYPE_DES_HMAC_SHA1   0x0008
+#define ENCTYPE_DES3_CBC_SHA1   0x0010
+#define ENCTYPE_UNKNOWN         0x01ff
+
+s32
+make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
+		   struct xdr_netobj *cksum);
+
+u32
+krb5_make_token(struct krb5_ctx *context_handle, int qop_req,
+	struct xdr_buf *input_message_buffer,
+	struct xdr_netobj *output_message_buffer, int toktype);
+
+u32
+krb5_read_token(struct krb5_ctx *context_handle,
+	  struct xdr_netobj *input_token_buffer,
+	  struct xdr_buf *message_buffer,
+	  int *qop_state, int toktype);
+
+u32
+krb5_encrypt(struct crypto_tfm * key,
+	     void *iv, void *in, void *out, int length);
+
+u32
+krb5_decrypt(struct crypto_tfm * key,
+	     void *iv, void *in, void *out, int length); 
+
+s32
+krb5_make_seq_num(struct crypto_tfm * key,
+		int direction,
+		s32 seqnum, unsigned char *cksum, unsigned char *buf);
+
+s32
+krb5_get_seq_num(struct crypto_tfm * key,
+	       unsigned char *cksum,
+	       unsigned char *buf, int *direction, s32 * seqnum);
diff --git a/include/linux/sunrpc/gss_spkm3.h b/include/linux/sunrpc/gss_spkm3.h
new file mode 100644
index 000000000000..b5c9968c3c17
--- /dev/null
+++ b/include/linux/sunrpc/gss_spkm3.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/linux/sunrpc/gss_spkm3.h
+ *
+ *  Copyright (c) 2000 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#include <linux/sunrpc/auth_gss.h>
+#include <linux/sunrpc/gss_err.h>
+#include <linux/sunrpc/gss_asn1.h>
+
+struct spkm3_ctx {
+	struct xdr_netobj	ctx_id; /* per message context id */
+	int			qop;         /* negotiated qop */
+	struct xdr_netobj	mech_used;
+	unsigned int		ret_flags ;
+	unsigned int		req_flags ;
+	struct xdr_netobj	share_key;
+	int			conf_alg;
+	struct crypto_tfm*	derived_conf_key;
+	int			intg_alg;
+	struct crypto_tfm*	derived_integ_key;
+	int			keyestb_alg;   /* alg used to get share_key */
+	int			owf_alg;   /* one way function */
+};
+
+/* from openssl/objects.h */
+/* XXX need SEAL_ALG_NONE */
+#define NID_md5		4
+#define NID_dhKeyAgreement	28 
+#define NID_des_cbc		31 
+#define NID_sha1		64
+#define NID_cast5_cbc		108
+
+/* SPKM InnerContext Token types */
+
+#define SPKM_ERROR_TOK	3
+#define SPKM_MIC_TOK	4
+#define SPKM_WRAP_TOK	5
+#define SPKM_DEL_TOK	6
+
+u32 spkm3_make_token(struct spkm3_ctx *ctx, int qop_req, struct xdr_buf * text, struct xdr_netobj * token, int toktype);
+
+u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, struct xdr_buf *message_buffer, int *qop_state, int toktype);
+
+#define CKSUMTYPE_RSA_MD5            0x0007
+
+s32 make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
+                   struct xdr_netobj *cksum);
+void asn1_bitstring_len(struct xdr_netobj *in, int *enclen, int *zerobits);
+int decode_asn1_bitstring(struct xdr_netobj *out, char *in, int enclen, 
+                   int explen);
+void spkm3_mic_header(unsigned char **hdrbuf, unsigned int *hdrlen, 
+                   unsigned char *ctxhdr, int elen, int zbit);
+void spkm3_make_mic_token(unsigned  char **tokp, int toklen, 
+                   struct xdr_netobj *mic_hdr,
+                   struct xdr_netobj *md5cksum, int md5elen, int md5zbit);
+u32 spkm3_verify_mic_token(unsigned char **tokp, int *mic_hdrlen, 
+                   unsigned char **cksum);
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
new file mode 100644
index 000000000000..15f115332389
--- /dev/null
+++ b/include/linux/sunrpc/msg_prot.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/net/sunrpc/msg_prot.h
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_MSGPROT_H_
+#define _LINUX_SUNRPC_MSGPROT_H_
+
+#ifdef __KERNEL__ /* user programs should get these from the rpc header files */
+
+#define RPC_VERSION 2
+
+/* spec defines authentication flavor as an unsigned 32 bit integer */
+typedef u32	rpc_authflavor_t;
+
+enum rpc_auth_flavors {
+	RPC_AUTH_NULL  = 0,
+	RPC_AUTH_UNIX  = 1,
+	RPC_AUTH_SHORT = 2,
+	RPC_AUTH_DES   = 3,
+	RPC_AUTH_KRB   = 4,
+	RPC_AUTH_GSS   = 6,
+	RPC_AUTH_MAXFLAVOR = 8,
+	/* pseudoflavors: */
+	RPC_AUTH_GSS_KRB5  = 390003,
+	RPC_AUTH_GSS_KRB5I = 390004,
+	RPC_AUTH_GSS_KRB5P = 390005,
+	RPC_AUTH_GSS_LKEY  = 390006,
+	RPC_AUTH_GSS_LKEYI = 390007,
+	RPC_AUTH_GSS_LKEYP = 390008,
+	RPC_AUTH_GSS_SPKM  = 390009,
+	RPC_AUTH_GSS_SPKMI = 390010,
+	RPC_AUTH_GSS_SPKMP = 390011,
+};
+
+enum rpc_msg_type {
+	RPC_CALL = 0,
+	RPC_REPLY = 1
+};
+
+enum rpc_reply_stat {
+	RPC_MSG_ACCEPTED = 0,
+	RPC_MSG_DENIED = 1
+};
+
+enum rpc_accept_stat {
+	RPC_SUCCESS = 0,
+	RPC_PROG_UNAVAIL = 1,
+	RPC_PROG_MISMATCH = 2,
+	RPC_PROC_UNAVAIL = 3,
+	RPC_GARBAGE_ARGS = 4,
+	RPC_SYSTEM_ERR = 5
+};
+
+enum rpc_reject_stat {
+	RPC_MISMATCH = 0,
+	RPC_AUTH_ERROR = 1
+};
+
+enum rpc_auth_stat {
+	RPC_AUTH_OK = 0,
+	RPC_AUTH_BADCRED = 1,
+	RPC_AUTH_REJECTEDCRED = 2,
+	RPC_AUTH_BADVERF = 3,
+	RPC_AUTH_REJECTEDVERF = 4,
+	RPC_AUTH_TOOWEAK = 5,
+	/* RPCSEC_GSS errors */
+	RPCSEC_GSS_CREDPROBLEM = 13,
+	RPCSEC_GSS_CTXPROBLEM = 14
+};
+
+#define RPC_PMAP_PROGRAM	100000
+#define RPC_PMAP_VERSION	2
+#define RPC_PMAP_PORT		111
+
+#define RPC_MAXNETNAMELEN	256
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
new file mode 100644
index 000000000000..63929349571f
--- /dev/null
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_SUNRPC_RPC_PIPE_FS_H
+#define _LINUX_SUNRPC_RPC_PIPE_FS_H
+
+#ifdef __KERNEL__
+
+struct rpc_pipe_msg {
+	struct list_head list;
+	void *data;
+	size_t len;
+	size_t copied;
+	int errno;
+};
+
+struct rpc_pipe_ops {
+	ssize_t (*upcall)(struct file *, struct rpc_pipe_msg *, char __user *, size_t);
+	ssize_t (*downcall)(struct file *, const char __user *, size_t);
+	void (*release_pipe)(struct inode *);
+	void (*destroy_msg)(struct rpc_pipe_msg *);
+};
+
+struct rpc_inode {
+	struct inode vfs_inode;
+	void *private;
+	struct list_head pipe;
+	struct list_head in_upcall;
+	int pipelen;
+	int nreaders;
+	int nwriters;
+	wait_queue_head_t waitq;
+#define RPC_PIPE_WAIT_FOR_OPEN	1
+	int flags;
+	struct rpc_pipe_ops *ops;
+	struct work_struct queue_timeout;
+};
+
+static inline struct rpc_inode *
+RPC_I(struct inode *inode)
+{
+	return container_of(inode, struct rpc_inode, vfs_inode);
+}
+
+extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *);
+
+extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *);
+extern int rpc_rmdir(char *);
+extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags);
+extern int rpc_unlink(char *);
+
+#endif
+#endif
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
new file mode 100644
index 000000000000..99d17ed7cebb
--- /dev/null
+++ b/include/linux/sunrpc/sched.h
@@ -0,0 +1,273 @@
+/*
+ * linux/include/linux/sunrpc/sched.h
+ *
+ * Scheduling primitives for kernel Sun RPC.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_SCHED_H_
+#define _LINUX_SUNRPC_SCHED_H_
+
+#include <linux/timer.h>
+#include <linux/sunrpc/types.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/sunrpc/xdr.h>
+
+/*
+ * This is the actual RPC procedure call info.
+ */
+struct rpc_procinfo;
+struct rpc_message {
+	struct rpc_procinfo *	rpc_proc;	/* Procedure information */
+	void *			rpc_argp;	/* Arguments */
+	void *			rpc_resp;	/* Result */
+	struct rpc_cred *	rpc_cred;	/* Credentials */
+};
+
+struct rpc_wait_queue;
+struct rpc_wait {
+	struct list_head	list;		/* wait queue links */
+	struct list_head	links;		/* Links to related tasks */
+	wait_queue_head_t	waitq;		/* sync: sleep on this q */
+	struct rpc_wait_queue *	rpc_waitq;	/* RPC wait queue we're on */
+};
+
+/*
+ * This is the RPC task struct
+ */
+struct rpc_task {
+#ifdef RPC_DEBUG
+	unsigned long		tk_magic;	/* 0xf00baa */
+#endif
+	struct list_head	tk_task;	/* global list of tasks */
+	struct rpc_clnt *	tk_client;	/* RPC client */
+	struct rpc_rqst *	tk_rqstp;	/* RPC request */
+	int			tk_status;	/* result of last operation */
+
+	/*
+	 * RPC call state
+	 */
+	struct rpc_message	tk_msg;		/* RPC call info */
+	__u32 *			tk_buffer;	/* XDR buffer */
+	size_t			tk_bufsize;
+	__u8			tk_garb_retry;
+	__u8			tk_cred_retry;
+
+	unsigned long		tk_cookie;	/* Cookie for batching tasks */
+
+	/*
+	 * timeout_fn   to be executed by timer bottom half
+	 * callback	to be executed after waking up
+	 * action	next procedure for async tasks
+	 * exit		exit async task and report to caller
+	 */
+	void			(*tk_timeout_fn)(struct rpc_task *);
+	void			(*tk_callback)(struct rpc_task *);
+	void			(*tk_action)(struct rpc_task *);
+	void			(*tk_exit)(struct rpc_task *);
+	void			(*tk_release)(struct rpc_task *);
+	void *			tk_calldata;
+
+	/*
+	 * tk_timer is used for async processing by the RPC scheduling
+	 * primitives. You should not access this directly unless
+	 * you have a pathological interest in kernel oopses.
+	 */
+	struct timer_list	tk_timer;	/* kernel timer */
+	unsigned long		tk_timeout;	/* timeout for rpc_sleep() */
+	unsigned short		tk_flags;	/* misc flags */
+	unsigned char		tk_active   : 1;/* Task has been activated */
+	unsigned char		tk_priority : 2;/* Task priority */
+	unsigned long		tk_runstate;	/* Task run status */
+	struct workqueue_struct	*tk_workqueue;	/* Normally rpciod, but could
+						 * be any workqueue
+						 */
+	union {
+		struct work_struct	tk_work;	/* Async task work queue */
+		struct rpc_wait		tk_wait;	/* RPC wait */
+	} u;
+#ifdef RPC_DEBUG
+	unsigned short		tk_pid;		/* debugging aid */
+#endif
+};
+#define tk_auth			tk_client->cl_auth
+#define tk_xprt			tk_client->cl_xprt
+
+/* support walking a list of tasks on a wait queue */
+#define	task_for_each(task, pos, head) \
+	list_for_each(pos, head) \
+		if ((task=list_entry(pos, struct rpc_task, u.tk_wait.list)),1)
+
+#define	task_for_first(task, head) \
+	if (!list_empty(head) &&  \
+	    ((task=list_entry((head)->next, struct rpc_task, u.tk_wait.list)),1))
+
+/* .. and walking list of all tasks */
+#define	alltask_for_each(task, pos, head) \
+	list_for_each(pos, head) \
+		if ((task=list_entry(pos, struct rpc_task, tk_task)),1)
+
+typedef void			(*rpc_action)(struct rpc_task *);
+
+/*
+ * RPC task flags
+ */
+#define RPC_TASK_ASYNC		0x0001		/* is an async task */
+#define RPC_TASK_SWAPPER	0x0002		/* is swapping in/out */
+#define RPC_TASK_CHILD		0x0008		/* is child of other task */
+#define RPC_CALL_MAJORSEEN	0x0020		/* major timeout seen */
+#define RPC_TASK_ROOTCREDS	0x0040		/* force root creds */
+#define RPC_TASK_DYNAMIC	0x0080		/* task was kmalloc'ed */
+#define RPC_TASK_KILLED		0x0100		/* task was killed */
+#define RPC_TASK_SOFT		0x0200		/* Use soft timeouts */
+#define RPC_TASK_NOINTR		0x0400		/* uninterruptible task */
+
+#define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
+#define RPC_IS_CHILD(t)		((t)->tk_flags & RPC_TASK_CHILD)
+#define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
+#define RPC_DO_ROOTOVERRIDE(t)	((t)->tk_flags & RPC_TASK_ROOTCREDS)
+#define RPC_ASSASSINATED(t)	((t)->tk_flags & RPC_TASK_KILLED)
+#define RPC_IS_ACTIVATED(t)	((t)->tk_active)
+#define RPC_DO_CALLBACK(t)	((t)->tk_callback != NULL)
+#define RPC_IS_SOFT(t)		((t)->tk_flags & RPC_TASK_SOFT)
+#define RPC_TASK_UNINTERRUPTIBLE(t) ((t)->tk_flags & RPC_TASK_NOINTR)
+
+#define RPC_TASK_RUNNING	0
+#define RPC_TASK_QUEUED		1
+#define RPC_TASK_WAKEUP		2
+#define RPC_TASK_HAS_TIMER	3
+
+#define RPC_IS_RUNNING(t)	(test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate))
+#define rpc_set_running(t)	(set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate))
+#define rpc_test_and_set_running(t) \
+				(test_and_set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate))
+#define rpc_clear_running(t)	\
+	do { \
+		smp_mb__before_clear_bit(); \
+		clear_bit(RPC_TASK_RUNNING, &(t)->tk_runstate); \
+		smp_mb__after_clear_bit(); \
+	} while (0)
+
+#define RPC_IS_QUEUED(t)	(test_bit(RPC_TASK_QUEUED, &(t)->tk_runstate))
+#define rpc_set_queued(t)	(set_bit(RPC_TASK_QUEUED, &(t)->tk_runstate))
+#define rpc_clear_queued(t)	\
+	do { \
+		smp_mb__before_clear_bit(); \
+		clear_bit(RPC_TASK_QUEUED, &(t)->tk_runstate); \
+		smp_mb__after_clear_bit(); \
+	} while (0)
+
+#define rpc_start_wakeup(t) \
+	(test_and_set_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate) == 0)
+#define rpc_finish_wakeup(t) \
+	do { \
+		smp_mb__before_clear_bit(); \
+		clear_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate); \
+		smp_mb__after_clear_bit(); \
+	} while (0)
+
+/*
+ * Task priorities.
+ * Note: if you change these, you must also change
+ * the task initialization definitions below.
+ */
+#define RPC_PRIORITY_LOW	0
+#define RPC_PRIORITY_NORMAL	1
+#define RPC_PRIORITY_HIGH	2
+#define RPC_NR_PRIORITY		(RPC_PRIORITY_HIGH+1)
+
+/*
+ * RPC synchronization objects
+ */
+struct rpc_wait_queue {
+	spinlock_t		lock;
+	struct list_head	tasks[RPC_NR_PRIORITY];	/* task queue for each priority level */
+	unsigned long		cookie;			/* cookie of last task serviced */
+	unsigned char		maxpriority;		/* maximum priority (0 if queue is not a priority queue) */
+	unsigned char		priority;		/* current priority */
+	unsigned char		count;			/* # task groups remaining serviced so far */
+	unsigned char		nr;			/* # tasks remaining for cookie */
+#ifdef RPC_DEBUG
+	const char *		name;
+#endif
+};
+
+/*
+ * This is the # requests to send consecutively
+ * from a single cookie.  The aim is to improve
+ * performance of NFS operations such as read/write.
+ */
+#define RPC_BATCH_COUNT			16
+
+#ifndef RPC_DEBUG
+# define RPC_WAITQ_INIT(var,qname) { \
+		.lock = SPIN_LOCK_UNLOCKED, \
+		.tasks = { \
+			[0] = LIST_HEAD_INIT(var.tasks[0]), \
+			[1] = LIST_HEAD_INIT(var.tasks[1]), \
+			[2] = LIST_HEAD_INIT(var.tasks[2]), \
+		}, \
+	}
+#else
+# define RPC_WAITQ_INIT(var,qname) { \
+		.lock = SPIN_LOCK_UNLOCKED, \
+		.tasks = { \
+			[0] = LIST_HEAD_INIT(var.tasks[0]), \
+			[1] = LIST_HEAD_INIT(var.tasks[1]), \
+			[2] = LIST_HEAD_INIT(var.tasks[2]), \
+		}, \
+		.name = qname, \
+	}
+#endif
+# define RPC_WAITQ(var,qname)      struct rpc_wait_queue var = RPC_WAITQ_INIT(var,qname)
+
+#define RPC_IS_PRIORITY(q)		((q)->maxpriority > 0)
+
+/*
+ * Function prototypes
+ */
+struct rpc_task *rpc_new_task(struct rpc_clnt *, rpc_action, int flags);
+struct rpc_task *rpc_new_child(struct rpc_clnt *, struct rpc_task *parent);
+void		rpc_init_task(struct rpc_task *, struct rpc_clnt *,
+					rpc_action exitfunc, int flags);
+void		rpc_release_task(struct rpc_task *);
+void		rpc_killall_tasks(struct rpc_clnt *);
+int		rpc_execute(struct rpc_task *);
+void		rpc_run_child(struct rpc_task *parent, struct rpc_task *child,
+					rpc_action action);
+void		rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *);
+void		rpc_init_wait_queue(struct rpc_wait_queue *, const char *);
+void		rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *,
+					rpc_action action, rpc_action timer);
+void		rpc_wake_up_task(struct rpc_task *);
+void		rpc_wake_up(struct rpc_wait_queue *);
+struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *);
+void		rpc_wake_up_status(struct rpc_wait_queue *, int);
+void		rpc_delay(struct rpc_task *, unsigned long);
+void *		rpc_malloc(struct rpc_task *, size_t);
+int		rpciod_up(void);
+void		rpciod_down(void);
+void		rpciod_wake_up(void);
+#ifdef RPC_DEBUG
+void		rpc_show_tasks(void);
+#endif
+int		rpc_init_mempool(void);
+void		rpc_destroy_mempool(void);
+
+static inline void rpc_exit(struct rpc_task *task, int status)
+{
+	task->tk_status = status;
+	task->tk_action = NULL;
+}
+
+#ifdef RPC_DEBUG
+static inline const char * rpc_qname(struct rpc_wait_queue *q)
+{
+	return ((q && q->name) ? q->name : "unknown");
+}
+#endif
+
+#endif /* _LINUX_SUNRPC_SCHED_H_ */
diff --git a/include/linux/sunrpc/stats.h b/include/linux/sunrpc/stats.h
new file mode 100644
index 000000000000..0d6ed3c8bdc4
--- /dev/null
+++ b/include/linux/sunrpc/stats.h
@@ -0,0 +1,78 @@
+/*
+ * linux/include/linux/sunrpc/stats.h
+ *
+ * Client statistics collection for SUN RPC
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_STATS_H
+#define _LINUX_SUNRPC_STATS_H
+
+#include <linux/config.h>
+#include <linux/proc_fs.h>
+
+struct rpc_stat {
+	struct rpc_program *	program;
+
+	unsigned int		netcnt,
+				netudpcnt,
+				nettcpcnt,
+				nettcpconn,
+				netreconn;
+	unsigned int		rpccnt,
+				rpcretrans,
+				rpcauthrefresh,
+				rpcgarbage;
+};
+
+struct svc_stat {
+	struct svc_program *	program;
+
+	unsigned int		netcnt,
+				netudpcnt,
+				nettcpcnt,
+				nettcpconn;
+	unsigned int		rpccnt,
+				rpcbadfmt,
+				rpcbadauth,
+				rpcbadclnt;
+};
+
+void			rpc_proc_init(void);
+void			rpc_proc_exit(void);
+#ifdef MODULE
+void			rpc_modcount(struct inode *, int);
+#endif
+
+#ifdef CONFIG_PROC_FS
+struct proc_dir_entry *	rpc_proc_register(struct rpc_stat *);
+void			rpc_proc_unregister(const char *);
+void			rpc_proc_zero(struct rpc_program *);
+struct proc_dir_entry *	svc_proc_register(struct svc_stat *,
+					  struct file_operations *);
+void			svc_proc_unregister(const char *);
+
+void			svc_seq_show(struct seq_file *,
+				     const struct svc_stat *);
+
+extern struct proc_dir_entry	*proc_net_rpc;
+
+#else
+
+static inline struct proc_dir_entry *rpc_proc_register(struct rpc_stat *s) { return NULL; }
+static inline void rpc_proc_unregister(const char *p) {}
+static inline void rpc_proc_zero(struct rpc_program *p) {}
+
+static inline struct proc_dir_entry *svc_proc_register(struct svc_stat *s,
+						       struct file_operations *f) { return NULL; }
+static inline void svc_proc_unregister(const char *p) {}
+
+static inline void svc_seq_show(struct seq_file *seq,
+				const struct svc_stat *st) {}
+
+#define proc_net_rpc NULL
+
+#endif
+
+#endif /* _LINUX_SUNRPC_STATS_H */
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
new file mode 100644
index 000000000000..37003970cf2e
--- /dev/null
+++ b/include/linux/sunrpc/svc.h
@@ -0,0 +1,306 @@
+/*
+ * linux/include/linux/sunrpc/svc.h
+ *
+ * RPC server declarations.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+
+#ifndef SUNRPC_SVC_H
+#define SUNRPC_SVC_H
+
+#include <linux/in.h>
+#include <linux/sunrpc/types.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/svcauth.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+
+/*
+ * RPC service.
+ *
+ * An RPC service is a ``daemon,'' possibly multithreaded, which
+ * receives and processes incoming RPC messages.
+ * It has one or more transport sockets associated with it, and maintains
+ * a list of idle threads waiting for input.
+ *
+ * We currently do not support more than one RPC program per daemon.
+ */
+struct svc_serv {
+	struct list_head	sv_threads;	/* idle server threads */
+	struct list_head	sv_sockets;	/* pending sockets */
+	struct svc_program *	sv_program;	/* RPC program */
+	struct svc_stat *	sv_stats;	/* RPC statistics */
+	spinlock_t		sv_lock;
+	unsigned int		sv_nrthreads;	/* # of server threads */
+	unsigned int		sv_bufsz;	/* datagram buffer size */
+	unsigned int		sv_xdrsize;	/* XDR buffer size */
+
+	struct list_head	sv_permsocks;	/* all permanent sockets */
+	struct list_head	sv_tempsocks;	/* all temporary sockets */
+	int			sv_tmpcnt;	/* count of temporary sockets */
+
+	char *			sv_name;	/* service name */
+};
+
+/*
+ * Maximum payload size supported by a kernel RPC server.
+ * This is use to determine the max number of pages nfsd is
+ * willing to return in a single READ operation.
+ */
+#define RPCSVC_MAXPAYLOAD	(64*1024u)
+
+/*
+ * RPC Requsts and replies are stored in one or more pages.
+ * We maintain an array of pages for each server thread.
+ * Requests are copied into these pages as they arrive.  Remaining
+ * pages are available to write the reply into.
+ *
+ * Pages are sent using ->sendpage so each server thread needs to
+ * allocate more to replace those used in sending.  To help keep track
+ * of these pages we have a receive list where all pages initialy live,
+ * and a send list where pages are moved to when there are to be part
+ * of a reply.
+ *
+ * We use xdr_buf for holding responses as it fits well with NFS
+ * read responses (that have a header, and some data pages, and possibly
+ * a tail) and means we can share some client side routines.
+ *
+ * The xdr_buf.head kvec always points to the first page in the rq_*pages
+ * list.  The xdr_buf.pages pointer points to the second page on that
+ * list.  xdr_buf.tail points to the end of the first page.
+ * This assumes that the non-page part of an rpc reply will fit
+ * in a page - NFSd ensures this.  lockd also has no trouble.
+ *
+ * Each request/reply pair can have at most one "payload", plus two pages,
+ * one for the request, and one for the reply.
+ */
+#define RPCSVC_MAXPAGES		((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE + 2)
+
+static inline u32 svc_getu32(struct kvec *iov)
+{
+	u32 val, *vp;
+	vp = iov->iov_base;
+	val = *vp++;
+	iov->iov_base = (void*)vp;
+	iov->iov_len -= sizeof(u32);
+	return val;
+}
+
+static inline void svc_ungetu32(struct kvec *iov)
+{
+	u32 *vp = (u32 *)iov->iov_base;
+	iov->iov_base = (void *)(vp - 1);
+	iov->iov_len += sizeof(*vp);
+}
+
+static inline void svc_putu32(struct kvec *iov, u32 val)
+{
+	u32 *vp = iov->iov_base + iov->iov_len;
+	*vp = val;
+	iov->iov_len += sizeof(u32);
+}
+
+	
+/*
+ * The context of a single thread, including the request currently being
+ * processed.
+ * NOTE: First two items must be prev/next.
+ */
+struct svc_rqst {
+	struct list_head	rq_list;	/* idle list */
+	struct svc_sock *	rq_sock;	/* socket */
+	struct sockaddr_in	rq_addr;	/* peer address */
+	int			rq_addrlen;
+
+	struct svc_serv *	rq_server;	/* RPC service definition */
+	struct svc_procedure *	rq_procinfo;	/* procedure info */
+	struct auth_ops *	rq_authop;	/* authentication flavour */
+	struct svc_cred		rq_cred;	/* auth info */
+	struct sk_buff *	rq_skbuff;	/* fast recv inet buffer */
+	struct svc_deferred_req*rq_deferred;	/* deferred request we are replaying */
+
+	struct xdr_buf		rq_arg;
+	struct xdr_buf		rq_res;
+	struct page *		rq_argpages[RPCSVC_MAXPAGES];
+	struct page *		rq_respages[RPCSVC_MAXPAGES];
+	int			rq_restailpage;
+	short			rq_argused;	/* pages used for argument */
+	short			rq_arghi;	/* pages available in argument page list */
+	short			rq_resused;	/* pages used for result */
+
+	u32			rq_xid;		/* transmission id */
+	u32			rq_prog;	/* program number */
+	u32			rq_vers;	/* program version */
+	u32			rq_proc;	/* procedure number */
+	u32			rq_prot;	/* IP protocol */
+	unsigned short
+				rq_secure  : 1;	/* secure port */
+
+
+	__u32			rq_daddr;	/* dest addr of request - reply from here */
+
+	void *			rq_argp;	/* decoded arguments */
+	void *			rq_resp;	/* xdr'd results */
+	void *			rq_auth_data;	/* flavor-specific data */
+
+	int			rq_reserved;	/* space on socket outq
+						 * reserved for this request
+						 */
+
+	struct cache_req	rq_chandle;	/* handle passed to caches for 
+						 * request delaying 
+						 */
+	/* Catering to nfsd */
+	struct auth_domain *	rq_client;	/* RPC peer info */
+	struct svc_cacherep *	rq_cacherep;	/* cache info */
+	struct knfsd_fh *	rq_reffh;	/* Referrence filehandle, used to
+						 * determine what device number
+						 * to report (real or virtual)
+						 */
+
+	wait_queue_head_t	rq_wait;	/* synchronization */
+};
+
+/*
+ * Check buffer bounds after decoding arguments
+ */
+static inline int
+xdr_argsize_check(struct svc_rqst *rqstp, u32 *p)
+{
+	char *cp = (char *)p;
+	struct kvec *vec = &rqstp->rq_arg.head[0];
+	return cp - (char*)vec->iov_base <= vec->iov_len;
+}
+
+static inline int
+xdr_ressize_check(struct svc_rqst *rqstp, u32 *p)
+{
+	struct kvec *vec = &rqstp->rq_res.head[0];
+	char *cp = (char*)p;
+
+	vec->iov_len = cp - (char*)vec->iov_base;
+
+	return vec->iov_len <= PAGE_SIZE;
+}
+
+static inline int svc_take_page(struct svc_rqst *rqstp)
+{
+	if (rqstp->rq_arghi <= rqstp->rq_argused)
+		return -ENOMEM;
+	rqstp->rq_arghi--;
+	rqstp->rq_respages[rqstp->rq_resused] =
+		rqstp->rq_argpages[rqstp->rq_arghi];
+	rqstp->rq_resused++;
+	return 0;
+}
+
+static inline void svc_pushback_allpages(struct svc_rqst *rqstp)
+{
+        while (rqstp->rq_resused) {
+		if (rqstp->rq_respages[--rqstp->rq_resused] == NULL)
+			continue;
+		rqstp->rq_argpages[rqstp->rq_arghi++] =
+			rqstp->rq_respages[rqstp->rq_resused];
+		rqstp->rq_respages[rqstp->rq_resused] = NULL;
+	}
+}
+
+static inline void svc_pushback_unused_pages(struct svc_rqst *rqstp)
+{
+	while (rqstp->rq_resused &&
+	       rqstp->rq_res.pages != &rqstp->rq_respages[rqstp->rq_resused]) {
+
+		if (rqstp->rq_respages[--rqstp->rq_resused] != NULL) {
+			rqstp->rq_argpages[rqstp->rq_arghi++] =
+				rqstp->rq_respages[rqstp->rq_resused];
+			rqstp->rq_respages[rqstp->rq_resused] = NULL;
+		}
+	}
+}
+
+static inline void svc_free_allpages(struct svc_rqst *rqstp)
+{
+        while (rqstp->rq_resused) {
+		if (rqstp->rq_respages[--rqstp->rq_resused] == NULL)
+			continue;
+		put_page(rqstp->rq_respages[rqstp->rq_resused]);
+		rqstp->rq_respages[rqstp->rq_resused] = NULL;
+	}
+}
+
+struct svc_deferred_req {
+	u32			prot;	/* protocol (UDP or TCP) */
+	struct sockaddr_in	addr;
+	struct svc_sock		*svsk;	/* where reply must go */
+	struct cache_deferred_req handle;
+	int			argslen;
+	u32			args[0];
+};
+
+/*
+ * RPC program
+ */
+struct svc_program {
+	u32			pg_prog;	/* program number */
+	unsigned int		pg_lovers;	/* lowest version */
+	unsigned int		pg_hivers;	/* lowest version */
+	unsigned int		pg_nvers;	/* number of versions */
+	struct svc_version **	pg_vers;	/* version array */
+	char *			pg_name;	/* service name */
+	char *			pg_class;	/* class name: services sharing authentication */
+	struct svc_stat *	pg_stats;	/* rpc statistics */
+	int			(*pg_authenticate)(struct svc_rqst *);
+};
+
+/*
+ * RPC program version
+ */
+struct svc_version {
+	u32			vs_vers;	/* version number */
+	u32			vs_nproc;	/* number of procedures */
+	struct svc_procedure *	vs_proc;	/* per-procedure info */
+	u32			vs_xdrsize;	/* xdrsize needed for this version */
+
+	/* Override dispatch function (e.g. when caching replies).
+	 * A return value of 0 means drop the request. 
+	 * vs_dispatch == NULL means use default dispatcher.
+	 */
+	int			(*vs_dispatch)(struct svc_rqst *, u32 *);
+};
+
+/*
+ * RPC procedure info
+ */
+typedef int	(*svc_procfunc)(struct svc_rqst *, void *argp, void *resp);
+struct svc_procedure {
+	svc_procfunc		pc_func;	/* process the request */
+	kxdrproc_t		pc_decode;	/* XDR decode args */
+	kxdrproc_t		pc_encode;	/* XDR encode result */
+	kxdrproc_t		pc_release;	/* XDR free result */
+	unsigned int		pc_argsize;	/* argument struct size */
+	unsigned int		pc_ressize;	/* result struct size */
+	unsigned int		pc_count;	/* call count */
+	unsigned int		pc_cachetype;	/* cache info (NFS) */
+	unsigned int		pc_xdrressize;	/* maximum size of XDR reply */
+};
+
+/*
+ * This is the RPC server thread function prototype
+ */
+typedef void		(*svc_thread_fn)(struct svc_rqst *);
+
+/*
+ * Function prototypes.
+ */
+struct svc_serv *  svc_create(struct svc_program *, unsigned int);
+int		   svc_create_thread(svc_thread_fn, struct svc_serv *);
+void		   svc_exit_thread(struct svc_rqst *);
+void		   svc_destroy(struct svc_serv *);
+int		   svc_process(struct svc_serv *, struct svc_rqst *);
+int		   svc_register(struct svc_serv *, int, unsigned short);
+void		   svc_wake_up(struct svc_serv *);
+void		   svc_reserve(struct svc_rqst *rqstp, int space);
+
+#endif /* SUNRPC_SVC_H */
diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h
new file mode 100644
index 000000000000..c119ce7cbd22
--- /dev/null
+++ b/include/linux/sunrpc/svcauth.h
@@ -0,0 +1,167 @@
+/*
+ * linux/include/linux/sunrpc/svcauth.h
+ *
+ * RPC server-side authentication stuff.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_SVCAUTH_H_
+#define _LINUX_SUNRPC_SVCAUTH_H_
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/hash.h>
+
+#define SVC_CRED_NGROUPS	32
+struct svc_cred {
+	uid_t			cr_uid;
+	gid_t			cr_gid;
+	struct group_info	*cr_group_info;
+};
+
+struct svc_rqst;		/* forward decl */
+
+/* Authentication is done in the context of a domain.
+ *
+ * Currently, the nfs server uses the auth_domain to stand
+ * for the "client" listed in /etc/exports.
+ *
+ * More generally, a domain might represent a group of clients using
+ * a common mechanism for authentication and having a common mapping
+ * between local identity (uid) and network identity.  All clients
+ * in a domain have similar general access rights.  Each domain can
+ * contain multiple principals which will have different specific right
+ * based on normal Discretionary Access Control.
+ *
+ * A domain is created by an authentication flavour module based on name
+ * only.  Userspace then fills in detail on demand.
+ *
+ * In the case of auth_unix and auth_null, the auth_domain is also
+ * associated with entries in another cache representing the mapping
+ * of ip addresses to the given client.
+ */
+struct auth_domain {
+	struct	cache_head	h;
+	char			*name;
+	int			flavour;
+};
+
+/*
+ * Each authentication flavour registers an auth_ops
+ * structure.
+ * name is simply the name.
+ * flavour gives the auth flavour. It determines where the flavour is registered
+ * accept() is given a request and should verify it.
+ *   It should inspect the authenticator and verifier, and possibly the data.
+ *    If there is a problem with the authentication *authp should be set.
+ *    The return value of accept() can indicate:
+ *      OK - authorised. client and credential are set in rqstp.
+ *           reqbuf points to arguments
+ *           resbuf points to good place for results.  verfier
+ *             is (probably) already in place.  Certainly space is
+ *	       reserved for it.
+ *      DROP - simply drop the request. It may have been deferred
+ *      GARBAGE - rpc garbage_args error
+ *      SYSERR - rpc system_err error
+ *      DENIED - authp holds reason for denial.
+ *      COMPLETE - the reply is encoded already and ready to be sent; no
+ *		further processing is necessary.  (This is used for processing
+ *		null procedure calls which are used to set up encryption
+ *		contexts.)
+ *
+ *   accept is passed the proc number so that it can accept NULL rpc requests
+ *   even if it cannot authenticate the client (as is sometimes appropriate).
+ *
+ * release() is given a request after the procedure has been run.
+ *  It should sign/encrypt the results if needed
+ * It should return:
+ *    OK - the resbuf is ready to be sent
+ *    DROP - the reply should be quitely dropped
+ *    DENIED - authp holds a reason for MSG_DENIED
+ *    SYSERR - rpc system_err
+ *
+ * domain_release()
+ *   This call releases a domain.
+ */
+struct auth_ops {
+	char *	name;
+	struct module *owner;
+	int	flavour;
+	int	(*accept)(struct svc_rqst *rq, u32 *authp);
+	int	(*release)(struct svc_rqst *rq);
+	void	(*domain_release)(struct auth_domain *);
+	int	(*set_client)(struct svc_rqst *rq);
+};
+
+#define	SVC_GARBAGE	1
+#define	SVC_SYSERR	2
+#define	SVC_VALID	3
+#define	SVC_NEGATIVE	4
+#define	SVC_OK		5
+#define	SVC_DROP	6
+#define	SVC_DENIED	7
+#define	SVC_PENDING	8
+#define	SVC_COMPLETE	9
+
+
+extern int	svc_authenticate(struct svc_rqst *rqstp, u32 *authp);
+extern int	svc_authorise(struct svc_rqst *rqstp);
+extern int	svc_set_client(struct svc_rqst *rqstp);
+extern int	svc_auth_register(rpc_authflavor_t flavor, struct auth_ops *aops);
+extern void	svc_auth_unregister(rpc_authflavor_t flavor);
+
+extern struct auth_domain *unix_domain_find(char *name);
+extern void auth_domain_put(struct auth_domain *item);
+extern int auth_unix_add_addr(struct in_addr addr, struct auth_domain *dom);
+extern struct auth_domain *auth_domain_lookup(struct auth_domain *item, int set);
+extern struct auth_domain *auth_domain_find(char *name);
+extern struct auth_domain *auth_unix_lookup(struct in_addr addr);
+extern int auth_unix_forget_old(struct auth_domain *dom);
+extern void svcauth_unix_purge(void);
+
+static inline unsigned long hash_str(char *name, int bits)
+{
+	unsigned long hash = 0;
+	unsigned long l = 0;
+	int len = 0;
+	unsigned char c;
+	do {
+		if (unlikely(!(c = *name++))) {
+			c = (char)len; len = -1;
+		}
+		l = (l << 8) | c;
+		len++;
+		if ((len & (BITS_PER_LONG/8-1))==0)
+			hash = hash_long(hash^l, BITS_PER_LONG);
+	} while (len);
+	return hash >> (BITS_PER_LONG - bits);
+}
+
+static inline unsigned long hash_mem(char *buf, int length, int bits)
+{
+	unsigned long hash = 0;
+	unsigned long l = 0;
+	int len = 0;
+	unsigned char c;
+	do {
+		if (len == length) {
+			c = (char)len; len = -1;
+		} else
+			c = *buf++;
+		l = (l << 8) | c;
+		len++;
+		if ((len & (BITS_PER_LONG/8-1))==0)
+			hash = hash_long(hash^l, BITS_PER_LONG);
+	} while (len);
+	return hash >> (BITS_PER_LONG - bits);
+}
+
+extern struct cache_detail auth_domain_cache, ip_map_cache;
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SUNRPC_SVCAUTH_H_ */
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
new file mode 100644
index 000000000000..3a2206f61de0
--- /dev/null
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -0,0 +1,27 @@
+/*
+ * linux/include/linux/svcauth_gss.h
+ *
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2002 The Regents of the Unviersity of Michigan
+ *
+ * $Id$
+ *
+ */
+
+#ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
+#define _LINUX_SUNRPC_SVCAUTH_GSS_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>
+#include <linux/sunrpc/types.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/svcauth.h>
+#include <linux/sunrpc/svcsock.h>
+#include <linux/sunrpc/auth_gss.h>
+
+int gss_svc_init(void);
+void gss_svc_shutdown(void);
+int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_SVCAUTH_GSS_H */
diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h
new file mode 100644
index 000000000000..d33c6face032
--- /dev/null
+++ b/include/linux/sunrpc/svcsock.h
@@ -0,0 +1,65 @@
+/*
+ * linux/include/linux/sunrpc/svcsock.h
+ *
+ * RPC server socket I/O.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef SUNRPC_SVCSOCK_H
+#define SUNRPC_SVCSOCK_H
+
+#include <linux/sunrpc/svc.h>
+
+/*
+ * RPC server socket.
+ */
+struct svc_sock {
+	struct list_head	sk_ready;	/* list of ready sockets */
+	struct list_head	sk_list;	/* list of all sockets */
+	struct socket *		sk_sock;	/* berkeley socket layer */
+	struct sock *		sk_sk;		/* INET layer */
+
+	struct svc_serv *	sk_server;	/* service for this socket */
+	unsigned int		sk_inuse;	/* use count */
+	unsigned long		sk_flags;
+#define	SK_BUSY		0			/* enqueued/receiving */
+#define	SK_CONN		1			/* conn pending */
+#define	SK_CLOSE	2			/* dead or dying */
+#define	SK_DATA		3			/* data pending */
+#define	SK_TEMP		4			/* temp (TCP) socket */
+#define	SK_DEAD		6			/* socket closed */
+#define	SK_CHNGBUF	7			/* need to change snd/rcv buffer sizes */
+#define	SK_DEFERRED	8			/* request on sk_deferred */
+
+	int			sk_reserved;	/* space on outq that is reserved */
+
+	struct list_head	sk_deferred;	/* deferred requests that need to
+						 * be revisted */
+	struct semaphore        sk_sem;		/* to serialize sending data */
+
+	int			(*sk_recvfrom)(struct svc_rqst *rqstp);
+	int			(*sk_sendto)(struct svc_rqst *rqstp);
+
+	/* We keep the old state_change and data_ready CB's here */
+	void			(*sk_ostate)(struct sock *);
+	void			(*sk_odata)(struct sock *, int bytes);
+	void			(*sk_owspace)(struct sock *);
+
+	/* private TCP part */
+	int			sk_reclen;	/* length of record */
+	int			sk_tcplen;	/* current read length */
+	time_t			sk_lastrecv;	/* time of last received request */
+};
+
+/*
+ * Function prototypes.
+ */
+int		svc_makesock(struct svc_serv *, int, unsigned short);
+void		svc_delete_socket(struct svc_sock *);
+int		svc_recv(struct svc_serv *, struct svc_rqst *, long);
+int		svc_send(struct svc_rqst *);
+void		svc_drop(struct svc_rqst *);
+void		svc_sock_update_bufs(struct svc_serv *serv);
+
+#endif /* SUNRPC_SVCSOCK_H */
diff --git a/include/linux/sunrpc/timer.h b/include/linux/sunrpc/timer.h
new file mode 100644
index 000000000000..a67fd734c73b
--- /dev/null
+++ b/include/linux/sunrpc/timer.h
@@ -0,0 +1,49 @@
+/*
+ *  linux/include/linux/sunrpc/timer.h
+ *
+ *  Declarations for the RPC transport timer.
+ *
+ *  Copyright (C) 2002 Trond Myklebust <trond.myklebust@fys.uio.no>
+ */
+
+#ifndef _LINUX_SUNRPC_TIMER_H
+#define _LINUX_SUNRPC_TIMER_H
+
+#include <asm/atomic.h>
+
+struct rpc_rtt {
+	unsigned long timeo;	/* default timeout value */
+	unsigned long srtt[5];	/* smoothed round trip time << 3 */
+	unsigned long sdrtt[5];	/* smoothed medium deviation of RTT */
+	int ntimeouts[5];	/* Number of timeouts for the last request */
+};
+
+
+extern void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo);
+extern void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m);
+extern unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer);
+
+static inline void rpc_set_timeo(struct rpc_rtt *rt, int timer, int ntimeo)
+{
+	int *t;
+	if (!timer)
+		return;
+	t = &rt->ntimeouts[timer-1];
+	if (ntimeo < *t) {
+		if (*t > 0)
+			(*t)--;
+	} else {
+		if (ntimeo > 8)
+			ntimeo = 8;
+		*t = ntimeo;
+	}
+}
+
+static inline int rpc_ntimeo(struct rpc_rtt *rt, int timer)
+{
+	if (!timer)
+		return 0;
+	return rt->ntimeouts[timer-1];
+}
+
+#endif /* _LINUX_SUNRPC_TIMER_H */
diff --git a/include/linux/sunrpc/types.h b/include/linux/sunrpc/types.h
new file mode 100644
index 000000000000..d222f47550af
--- /dev/null
+++ b/include/linux/sunrpc/types.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/linux/sunrpc/types.h
+ *
+ * Generic types and misc stuff for RPC.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_TYPES_H_
+#define _LINUX_SUNRPC_TYPES_H_
+
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/sunrpc/debug.h>
+#include <linux/list.h>
+
+/*
+ * Shorthands
+ */
+#define signalled()		(signal_pending(current))
+
+#endif /* _LINUX_SUNRPC_TYPES_H_ */
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
new file mode 100644
index 000000000000..541dcf838abf
--- /dev/null
+++ b/include/linux/sunrpc/xdr.h
@@ -0,0 +1,192 @@
+/*
+ * include/linux/sunrpc/xdr.h
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _SUNRPC_XDR_H_
+#define _SUNRPC_XDR_H_
+
+#ifdef __KERNEL__
+
+#include <linux/uio.h>
+#include <asm/byteorder.h>
+
+/*
+ * Buffer adjustment
+ */
+#define XDR_QUADLEN(l)		(((l) + 3) >> 2)
+
+/*
+ * Generic opaque `network object.' At the kernel level, this type
+ * is used only by lockd.
+ */
+#define XDR_MAX_NETOBJ		1024
+struct xdr_netobj {
+	unsigned int		len;
+	u8 *			data;
+};
+
+/*
+ * This is the generic XDR function. rqstp is either a rpc_rqst (client
+ * side) or svc_rqst pointer (server side).
+ * Encode functions always assume there's enough room in the buffer.
+ */
+typedef int	(*kxdrproc_t)(void *rqstp, u32 *data, void *obj);
+
+/*
+ * Basic structure for transmission/reception of a client XDR message.
+ * Features a header (for a linear buffer containing RPC headers
+ * and the data payload for short messages), and then an array of
+ * pages.
+ * The tail iovec allows you to append data after the page array. Its
+ * main interest is for appending padding to the pages in order to
+ * satisfy the int_32-alignment requirements in RFC1832.
+ *
+ * For the future, we might want to string several of these together
+ * in a list if anybody wants to make use of NFSv4 COMPOUND
+ * operations and/or has a need for scatter/gather involving pages.
+ */
+struct xdr_buf {
+	struct kvec	head[1],	/* RPC header + non-page data */
+			tail[1];	/* Appended after page data */
+
+	struct page **	pages;		/* Array of contiguous pages */
+	unsigned int	page_base,	/* Start of page data */
+			page_len;	/* Length of page data */
+
+	unsigned int	buflen,		/* Total length of storage buffer */
+			len;		/* Length of XDR encoded message */
+
+};
+
+/*
+ * pre-xdr'ed macros.
+ */
+
+#define	xdr_zero	__constant_htonl(0)
+#define	xdr_one		__constant_htonl(1)
+#define	xdr_two		__constant_htonl(2)
+
+#define	rpc_success		__constant_htonl(RPC_SUCCESS)
+#define	rpc_prog_unavail	__constant_htonl(RPC_PROG_UNAVAIL)
+#define	rpc_prog_mismatch	__constant_htonl(RPC_PROG_MISMATCH)
+#define	rpc_proc_unavail	__constant_htonl(RPC_PROC_UNAVAIL)
+#define	rpc_garbage_args	__constant_htonl(RPC_GARBAGE_ARGS)
+#define	rpc_system_err		__constant_htonl(RPC_SYSTEM_ERR)
+
+#define	rpc_auth_ok		__constant_htonl(RPC_AUTH_OK)
+#define	rpc_autherr_badcred	__constant_htonl(RPC_AUTH_BADCRED)
+#define	rpc_autherr_rejectedcred __constant_htonl(RPC_AUTH_REJECTEDCRED)
+#define	rpc_autherr_badverf	__constant_htonl(RPC_AUTH_BADVERF)
+#define	rpc_autherr_rejectedverf __constant_htonl(RPC_AUTH_REJECTEDVERF)
+#define	rpc_autherr_tooweak	__constant_htonl(RPC_AUTH_TOOWEAK)
+#define	rpcsec_gsserr_credproblem	__constant_htonl(RPCSEC_GSS_CREDPROBLEM)
+#define	rpcsec_gsserr_ctxproblem	__constant_htonl(RPCSEC_GSS_CTXPROBLEM)
+#define	rpc_autherr_oldseqnum	__constant_htonl(101)
+
+/*
+ * Miscellaneous XDR helper functions
+ */
+u32 *	xdr_encode_opaque_fixed(u32 *p, const void *ptr, unsigned int len);
+u32 *	xdr_encode_opaque(u32 *p, const void *ptr, unsigned int len);
+u32 *	xdr_encode_string(u32 *p, const char *s);
+u32 *	xdr_decode_string(u32 *p, char **sp, int *lenp, int maxlen);
+u32 *	xdr_decode_string_inplace(u32 *p, char **sp, int *lenp, int maxlen);
+u32 *	xdr_encode_netobj(u32 *p, const struct xdr_netobj *);
+u32 *	xdr_decode_netobj(u32 *p, struct xdr_netobj *);
+
+void	xdr_encode_pages(struct xdr_buf *, struct page **, unsigned int,
+			 unsigned int);
+void	xdr_inline_pages(struct xdr_buf *, unsigned int,
+			 struct page **, unsigned int, unsigned int);
+
+static inline u32 *xdr_encode_array(u32 *p, const void *s, unsigned int len)
+{
+	return xdr_encode_opaque(p, s, len);
+}
+
+/*
+ * Decode 64bit quantities (NFSv3 support)
+ */
+static inline u32 *
+xdr_encode_hyper(u32 *p, __u64 val)
+{
+	*p++ = htonl(val >> 32);
+	*p++ = htonl(val & 0xFFFFFFFF);
+	return p;
+}
+
+static inline u32 *
+xdr_decode_hyper(u32 *p, __u64 *valp)
+{
+	*valp  = ((__u64) ntohl(*p++)) << 32;
+	*valp |= ntohl(*p++);
+	return p;
+}
+
+/*
+ * Adjust kvec to reflect end of xdr'ed data (RPC client XDR)
+ */
+static inline int
+xdr_adjust_iovec(struct kvec *iov, u32 *p)
+{
+	return iov->iov_len = ((u8 *) p - (u8 *) iov->iov_base);
+}
+
+/*
+ * Maximum number of iov's we use.
+ */
+#define MAX_IOVEC	(12)
+
+/*
+ * XDR buffer helper functions
+ */
+extern void xdr_shift_buf(struct xdr_buf *, size_t);
+extern void xdr_buf_from_iov(struct kvec *, struct xdr_buf *);
+extern int xdr_buf_subsegment(struct xdr_buf *, struct xdr_buf *, int, int);
+extern int xdr_buf_read_netobj(struct xdr_buf *, struct xdr_netobj *, int);
+extern int read_bytes_from_xdr_buf(struct xdr_buf *buf, int base, void *obj, int len);
+
+/*
+ * Helper structure for copying from an sk_buff.
+ */
+typedef struct {
+	struct sk_buff	*skb;
+	unsigned int	offset;
+	size_t		count;
+	unsigned int	csum;
+} skb_reader_t;
+
+typedef size_t (*skb_read_actor_t)(skb_reader_t *desc, void *to, size_t len);
+
+extern void xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int,
+		skb_reader_t *, skb_read_actor_t);
+
+struct socket;
+struct sockaddr;
+extern int xdr_sendpages(struct socket *, struct sockaddr *, int,
+		struct xdr_buf *, unsigned int, int);
+
+/*
+ * Provide some simple tools for XDR buffer overflow-checking etc.
+ */
+struct xdr_stream {
+	uint32_t *p;		/* start of available buffer */
+	struct xdr_buf *buf;	/* XDR buffer to read/write */
+
+	uint32_t *end;		/* end of available buffer space */
+	struct kvec *iov;	/* pointer to the current kvec */
+};
+
+extern void xdr_init_encode(struct xdr_stream *xdr, struct xdr_buf *buf, uint32_t *p);
+extern uint32_t *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes);
+extern void xdr_write_pages(struct xdr_stream *xdr, struct page **pages,
+		unsigned int base, unsigned int len);
+extern void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, uint32_t *p);
+extern uint32_t *xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes);
+extern void xdr_read_pages(struct xdr_stream *xdr, unsigned int len);
+
+#endif /* __KERNEL__ */
+
+#endif /* _SUNRPC_XDR_H_ */
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
new file mode 100644
index 000000000000..e618c1649814
--- /dev/null
+++ b/include/linux/sunrpc/xprt.h
@@ -0,0 +1,232 @@
+/*
+ *  linux/include/linux/sunrpc/clnt_xprt.h
+ *
+ *  Declarations for the RPC transport interface.
+ *
+ *  Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_XPRT_H
+#define _LINUX_SUNRPC_XPRT_H
+
+#include <linux/uio.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/xdr.h>
+
+/*
+ * The transport code maintains an estimate on the maximum number of out-
+ * standing RPC requests, using a smoothed version of the congestion
+ * avoidance implemented in 44BSD. This is basically the Van Jacobson
+ * congestion algorithm: If a retransmit occurs, the congestion window is
+ * halved; otherwise, it is incremented by 1/cwnd when
+ *
+ *	-	a reply is received and
+ *	-	a full number of requests are outstanding and
+ *	-	the congestion window hasn't been updated recently.
+ *
+ * Upper procedures may check whether a request would block waiting for
+ * a free RPC slot by using the RPC_CONGESTED() macro.
+ */
+extern unsigned int xprt_udp_slot_table_entries;
+extern unsigned int xprt_tcp_slot_table_entries;
+
+#define RPC_MIN_SLOT_TABLE	(2U)
+#define RPC_DEF_SLOT_TABLE	(16U)
+#define RPC_MAX_SLOT_TABLE	(128U)
+
+#define RPC_CWNDSHIFT		(8U)
+#define RPC_CWNDSCALE		(1U << RPC_CWNDSHIFT)
+#define RPC_INITCWND		RPC_CWNDSCALE
+#define RPC_MAXCWND(xprt)	((xprt)->max_reqs << RPC_CWNDSHIFT)
+#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd)
+
+/* Default timeout values */
+#define RPC_MAX_UDP_TIMEOUT	(60*HZ)
+#define RPC_MAX_TCP_TIMEOUT	(600*HZ)
+
+/*
+ * Wait duration for an RPC TCP connection to be established.  Solaris
+ * NFS over TCP uses 60 seconds, for example, which is in line with how
+ * long a server takes to reboot.
+ */
+#define RPC_CONNECT_TIMEOUT	(60*HZ)
+
+/*
+ * Delay an arbitrary number of seconds before attempting to reconnect
+ * after an error.
+ */
+#define RPC_REESTABLISH_TIMEOUT	(15*HZ)
+
+/* RPC call and reply header size as number of 32bit words (verifier
+ * size computed separately)
+ */
+#define RPC_CALLHDRSIZE		6
+#define RPC_REPHDRSIZE		4
+
+/*
+ * This describes a timeout strategy
+ */
+struct rpc_timeout {
+	unsigned long		to_initval,		/* initial timeout */
+				to_maxval,		/* max timeout */
+				to_increment;		/* if !exponential */
+	unsigned int		to_retries;		/* max # of retries */
+	unsigned char		to_exponential;
+};
+
+/*
+ * This describes a complete RPC request
+ */
+struct rpc_rqst {
+	/*
+	 * This is the user-visible part
+	 */
+	struct rpc_xprt *	rq_xprt;		/* RPC client */
+	struct xdr_buf		rq_snd_buf;		/* send buffer */
+	struct xdr_buf		rq_rcv_buf;		/* recv buffer */
+
+	/*
+	 * This is the private part
+	 */
+	struct rpc_task *	rq_task;	/* RPC task data */
+	__u32			rq_xid;		/* request XID */
+	int			rq_cong;	/* has incremented xprt->cong */
+	int			rq_received;	/* receive completed */
+	u32			rq_seqno;	/* gss seq no. used on req. */
+
+	struct list_head	rq_list;
+
+	struct xdr_buf		rq_private_buf;		/* The receive buffer
+							 * used in the softirq.
+							 */
+	unsigned long		rq_majortimeo;	/* major timeout alarm */
+	unsigned long		rq_timeout;	/* Current timeout value */
+	unsigned int		rq_retries;	/* # of retries */
+	/*
+	 * For authentication (e.g. auth_des)
+	 */
+	u32			rq_creddata[2];
+	
+	/*
+	 * Partial send handling
+	 */
+	
+	u32			rq_bytes_sent;	/* Bytes we have sent */
+
+	unsigned long		rq_xtime;	/* when transmitted */
+	int			rq_ntrans;
+};
+#define rq_svec			rq_snd_buf.head
+#define rq_slen			rq_snd_buf.len
+
+#define XPRT_LAST_FRAG		(1 << 0)
+#define XPRT_COPY_RECM		(1 << 1)
+#define XPRT_COPY_XID		(1 << 2)
+#define XPRT_COPY_DATA		(1 << 3)
+
+struct rpc_xprt {
+	struct socket *		sock;		/* BSD socket layer */
+	struct sock *		inet;		/* INET layer */
+
+	struct rpc_timeout	timeout;	/* timeout parms */
+	struct sockaddr_in	addr;		/* server address */
+	int			prot;		/* IP protocol */
+
+	unsigned long		cong;		/* current congestion */
+	unsigned long		cwnd;		/* congestion window */
+
+	unsigned int		rcvsize,	/* socket receive buffer size */
+				sndsize;	/* socket send buffer size */
+
+	size_t			max_payload;	/* largest RPC payload size,
+						   in bytes */
+
+	struct rpc_wait_queue	sending;	/* requests waiting to send */
+	struct rpc_wait_queue	resend;		/* requests waiting to resend */
+	struct rpc_wait_queue	pending;	/* requests in flight */
+	struct rpc_wait_queue	backlog;	/* waiting for slot */
+	struct list_head	free;		/* free slots */
+	struct rpc_rqst *	slot;		/* slot table storage */
+	unsigned int		max_reqs;	/* total slots */
+	unsigned long		sockstate;	/* Socket state */
+	unsigned char		shutdown   : 1,	/* being shut down */
+				nocong	   : 1,	/* no congestion control */
+				resvport   : 1, /* use a reserved port */
+				stream     : 1;	/* TCP */
+
+	/*
+	 * XID
+	 */
+	__u32			xid;		/* Next XID value to use */
+
+	/*
+	 * State of TCP reply receive stuff
+	 */
+	u32			tcp_recm,	/* Fragment header */
+				tcp_xid,	/* Current XID */
+				tcp_reclen,	/* fragment length */
+				tcp_offset;	/* fragment offset */
+	unsigned long		tcp_copied,	/* copied to request */
+				tcp_flags;
+	/*
+	 * Connection of sockets
+	 */
+	struct work_struct	sock_connect;
+	unsigned short		port;
+	/*
+	 * Disconnection of idle sockets
+	 */
+	struct work_struct	task_cleanup;
+	struct timer_list	timer;
+	unsigned long		last_used;
+
+	/*
+	 * Send stuff
+	 */
+	spinlock_t		sock_lock;	/* lock socket info */
+	spinlock_t		xprt_lock;	/* lock xprt info */
+	struct rpc_task *	snd_task;	/* Task blocked in send */
+
+	struct list_head	recv;
+
+
+	void			(*old_data_ready)(struct sock *, int);
+	void			(*old_state_change)(struct sock *);
+	void			(*old_write_space)(struct sock *);
+
+	wait_queue_head_t	cong_wait;
+};
+
+#ifdef __KERNEL__
+
+struct rpc_xprt *	xprt_create_proto(int proto, struct sockaddr_in *addr,
+					struct rpc_timeout *toparms);
+int			xprt_destroy(struct rpc_xprt *);
+void			xprt_set_timeout(struct rpc_timeout *, unsigned int,
+					unsigned long);
+
+void			xprt_reserve(struct rpc_task *);
+int			xprt_prepare_transmit(struct rpc_task *);
+void			xprt_transmit(struct rpc_task *);
+void			xprt_receive(struct rpc_task *);
+int			xprt_adjust_timeout(struct rpc_rqst *req);
+void			xprt_release(struct rpc_task *);
+void			xprt_connect(struct rpc_task *);
+void			xprt_sock_setbufsize(struct rpc_xprt *);
+
+#define XPRT_LOCKED	0
+#define XPRT_CONNECT	1
+#define XPRT_CONNECTING	2
+
+#define xprt_connected(xp)		(test_bit(XPRT_CONNECT, &(xp)->sockstate))
+#define xprt_set_connected(xp)		(set_bit(XPRT_CONNECT, &(xp)->sockstate))
+#define xprt_test_and_set_connected(xp)	(test_and_set_bit(XPRT_CONNECT, &(xp)->sockstate))
+#define xprt_test_and_clear_connected(xp) \
+					(test_and_clear_bit(XPRT_CONNECT, &(xp)->sockstate))
+#define xprt_clear_connected(xp)	(clear_bit(XPRT_CONNECT, &(xp)->sockstate))
+
+#endif /* __KERNEL__*/
+
+#endif /* _LINUX_SUNRPC_XPRT_H */
diff --git a/include/linux/superhyway.h b/include/linux/superhyway.h
new file mode 100644
index 000000000000..c906c5a0aaef
--- /dev/null
+++ b/include/linux/superhyway.h
@@ -0,0 +1,79 @@
+/*
+ * include/linux/superhyway.h
+ *
+ * SuperHyway Bus definitions
+ *
+ * Copyright (C) 2004, 2005  Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __LINUX_SUPERHYWAY_H
+#define __LINUX_SUPERHYWAY_H
+
+#include <linux/device.h>
+
+/*
+ * SuperHyway IDs
+ */
+#define SUPERHYWAY_DEVICE_ID_SH5_DMAC	0x0183
+
+struct vcr_info {
+	u8	perr_flags;	/* P-port Error flags */
+	u8	merr_flags;	/* Module Error flags */
+	u16	mod_vers;	/* Module Version */
+	u16	mod_id;		/* Module ID */
+	u8	bot_mb;		/* Bottom Memory block */
+	u8	top_mb;		/* Top Memory block */
+};
+
+struct superhyway_device_id {
+	unsigned int id;
+	unsigned long driver_data;
+};
+
+struct superhyway_device;
+extern struct bus_type superhyway_bus_type;
+
+struct superhyway_driver {
+	char *name;
+
+	const struct superhyway_device_id *id_table;
+	struct device_driver drv;
+
+	int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
+	void (*remove)(struct superhyway_device *dev);
+};
+
+#define to_superhyway_driver(d)	container_of((d), struct superhyway_driver, drv)
+
+struct superhyway_device {
+	char name[32];
+
+	struct device dev;
+
+	struct superhyway_device_id id;
+	struct superhyway_driver *drv;
+
+	struct resource resource;
+	struct vcr_info vcr;
+};
+
+#define to_superhyway_device(d)	container_of((d), struct superhyway_device, dev)
+
+#define superhyway_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define superhyway_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, (p))
+
+extern int superhyway_scan_bus(void);
+
+/* drivers/sh/superhyway/superhyway.c */
+int superhyway_register_driver(struct superhyway_driver *);
+void superhyway_unregister_driver(struct superhyway_driver *);
+int superhyway_add_device(unsigned int, unsigned long, unsigned long long);
+
+/* drivers/sh/superhyway/superhyway-sysfs.c */
+extern struct device_attribute superhyway_dev_attrs[];
+
+#endif /* __LINUX_SUPERHYWAY_H */
+
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
new file mode 100644
index 000000000000..2bf0d5fabcdb
--- /dev/null
+++ b/include/linux/suspend.h
@@ -0,0 +1,75 @@
+#ifndef _LINUX_SWSUSP_H
+#define _LINUX_SWSUSP_H
+
+#if defined(CONFIG_X86) || defined(CONFIG_FRV) || defined(CONFIG_PPC32)
+#include <asm/suspend.h>
+#endif
+#include <linux/swap.h>
+#include <linux/notifier.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+
+/* page backup entry */
+typedef struct pbe {
+	unsigned long address;		/* address of the copy */
+	unsigned long orig_address;	/* original address of page */
+	swp_entry_t swap_address;	
+
+	struct pbe *next;	/* also used as scratch space at
+				 * end of page (see link, diskpage)
+				 */
+} suspend_pagedir_t;
+
+#define for_each_pbe(pbe, pblist) \
+	for (pbe = pblist ; pbe ; pbe = pbe->next)
+
+#define PBES_PER_PAGE      (PAGE_SIZE/sizeof(struct pbe))
+#define PB_PAGE_SKIP       (PBES_PER_PAGE-1)
+
+#define for_each_pb_page(pbe, pblist) \
+	for (pbe = pblist ; pbe ; pbe = (pbe+PB_PAGE_SKIP)->next)
+
+
+#define SWAP_FILENAME_MAXLENGTH	32
+
+
+extern dev_t swsusp_resume_device;
+   
+/* mm/vmscan.c */
+extern int shrink_mem(void);
+
+/* mm/page_alloc.c */
+extern void drain_local_pages(void);
+extern void mark_free_pages(struct zone *zone);
+
+#ifdef CONFIG_PM
+/* kernel/power/swsusp.c */
+extern int software_suspend(void);
+
+extern int pm_prepare_console(void);
+extern void pm_restore_console(void);
+
+#else
+static inline int software_suspend(void)
+{
+	printk("Warning: fake suspend called\n");
+	return -EPERM;
+}
+#endif
+
+#ifdef CONFIG_SMP
+extern void disable_nonboot_cpus(void);
+extern void enable_nonboot_cpus(void);
+#else
+static inline void disable_nonboot_cpus(void) {}
+static inline void enable_nonboot_cpus(void) {}
+#endif
+
+void save_processor_state(void);
+void restore_processor_state(void);
+struct saved_context;
+void __save_processor_state(struct saved_context *ctxt);
+void __restore_processor_state(struct saved_context *ctxt);
+
+#endif /* _LINUX_SWSUSP_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
new file mode 100644
index 000000000000..3bbc41be9bd0
--- /dev/null
+++ b/include/linux/swap.h
@@ -0,0 +1,293 @@
+#ifndef _LINUX_SWAP_H
+#define _LINUX_SWAP_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/linkage.h>
+#include <linux/mmzone.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+
+#define SWAP_FLAG_PREFER	0x8000	/* set if swap priority specified */
+#define SWAP_FLAG_PRIO_MASK	0x7fff
+#define SWAP_FLAG_PRIO_SHIFT	0
+
+static inline int current_is_kswapd(void)
+{
+	return current->flags & PF_KSWAPD;
+}
+
+/*
+ * MAX_SWAPFILES defines the maximum number of swaptypes: things which can
+ * be swapped to.  The swap type and the offset into that swap type are
+ * encoded into pte's and into pgoff_t's in the swapcache.  Using five bits
+ * for the type means that the maximum number of swapcache pages is 27 bits
+ * on 32-bit-pgoff_t architectures.  And that assumes that the architecture packs
+ * the type/offset into the pte as 5/27 as well.
+ */
+#define MAX_SWAPFILES_SHIFT	5
+#define MAX_SWAPFILES		(1 << MAX_SWAPFILES_SHIFT)
+
+/*
+ * Magic header for a swap area. The first part of the union is
+ * what the swap magic looks like for the old (limited to 128MB)
+ * swap area format, the second part of the union adds - in the
+ * old reserved area - some extra information. Note that the first
+ * kilobyte is reserved for boot loader or disk label stuff...
+ *
+ * Having the magic at the end of the PAGE_SIZE makes detecting swap
+ * areas somewhat tricky on machines that support multiple page sizes.
+ * For 2.5 we'll probably want to move the magic to just beyond the
+ * bootbits...
+ */
+union swap_header {
+	struct {
+		char reserved[PAGE_SIZE - 10];
+		char magic[10];			/* SWAP-SPACE or SWAPSPACE2 */
+	} magic;
+	struct {
+		char	     bootbits[1024];	/* Space for disklabel etc. */
+		unsigned int version;
+		unsigned int last_page;
+		unsigned int nr_badpages;
+		unsigned int padding[125];
+		unsigned int badpages[1];
+	} info;
+};
+
+ /* A swap entry has to fit into a "unsigned long", as
+  * the entry is hidden in the "index" field of the
+  * swapper address space.
+  */
+typedef struct {
+	unsigned long val;
+} swp_entry_t;
+
+/*
+ * current->reclaim_state points to one of these when a task is running
+ * memory reclaim
+ */
+struct reclaim_state {
+	unsigned long reclaimed_slab;
+};
+
+#ifdef __KERNEL__
+
+struct address_space;
+struct sysinfo;
+struct writeback_control;
+struct zone;
+
+/*
+ * A swap extent maps a range of a swapfile's PAGE_SIZE pages onto a range of
+ * disk blocks.  A list of swap extents maps the entire swapfile.  (Where the
+ * term `swapfile' refers to either a blockdevice or an IS_REG file.  Apart
+ * from setup, they're handled identically.
+ *
+ * We always assume that blocks are of size PAGE_SIZE.
+ */
+struct swap_extent {
+	struct list_head list;
+	pgoff_t start_page;
+	pgoff_t nr_pages;
+	sector_t start_block;
+};
+
+/*
+ * Max bad pages in the new format..
+ */
+#define __swapoffset(x) ((unsigned long)&((union swap_header *)0)->x)
+#define MAX_SWAP_BADPAGES \
+	((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int))
+
+enum {
+	SWP_USED	= (1 << 0),	/* is slot in swap_info[] used? */
+	SWP_WRITEOK	= (1 << 1),	/* ok to write to this swap?	*/
+	SWP_ACTIVE	= (SWP_USED | SWP_WRITEOK),
+};
+
+#define SWAP_CLUSTER_MAX 32
+
+#define SWAP_MAP_MAX	0x7fff
+#define SWAP_MAP_BAD	0x8000
+
+/*
+ * The in-memory structure used to track swap areas.
+ * extent_list.prev points at the lowest-index extent.  That list is
+ * sorted.
+ */
+struct swap_info_struct {
+	unsigned int flags;
+	spinlock_t sdev_lock;
+	struct file *swap_file;
+	struct block_device *bdev;
+	struct list_head extent_list;
+	int nr_extents;
+	struct swap_extent *curr_swap_extent;
+	unsigned old_block_size;
+	unsigned short * swap_map;
+	unsigned int lowest_bit;
+	unsigned int highest_bit;
+	unsigned int cluster_next;
+	unsigned int cluster_nr;
+	int prio;			/* swap priority */
+	int pages;
+	unsigned long max;
+	unsigned long inuse_pages;
+	int next;			/* next entry on swap list */
+};
+
+struct swap_list_t {
+	int head;	/* head of priority-ordered swapfile list */
+	int next;	/* swapfile to be used next */
+};
+
+/* Swap 50% full? Release swapcache more aggressively.. */
+#define vm_swap_full() (nr_swap_pages*2 < total_swap_pages)
+
+/* linux/mm/oom_kill.c */
+extern void out_of_memory(unsigned int __nocast gfp_mask);
+
+/* linux/mm/memory.c */
+extern void swapin_readahead(swp_entry_t, unsigned long, struct vm_area_struct *);
+
+/* linux/mm/page_alloc.c */
+extern unsigned long totalram_pages;
+extern unsigned long totalhigh_pages;
+extern long nr_swap_pages;
+extern unsigned int nr_free_pages(void);
+extern unsigned int nr_free_pages_pgdat(pg_data_t *pgdat);
+extern unsigned int nr_free_buffer_pages(void);
+extern unsigned int nr_free_pagecache_pages(void);
+
+/* linux/mm/swap.c */
+extern void FASTCALL(lru_cache_add(struct page *));
+extern void FASTCALL(lru_cache_add_active(struct page *));
+extern void FASTCALL(activate_page(struct page *));
+extern void FASTCALL(mark_page_accessed(struct page *));
+extern void lru_add_drain(void);
+extern int rotate_reclaimable_page(struct page *page);
+extern void swap_setup(void);
+
+/* linux/mm/vmscan.c */
+extern int try_to_free_pages(struct zone **, unsigned int, unsigned int);
+extern int shrink_all_memory(int);
+extern int vm_swappiness;
+
+#ifdef CONFIG_MMU
+/* linux/mm/shmem.c */
+extern int shmem_unuse(swp_entry_t entry, struct page *page);
+#endif /* CONFIG_MMU */
+
+extern void swap_unplug_io_fn(struct backing_dev_info *, struct page *);
+
+#ifdef CONFIG_SWAP
+/* linux/mm/page_io.c */
+extern int swap_readpage(struct file *, struct page *);
+extern int swap_writepage(struct page *page, struct writeback_control *wbc);
+extern int rw_swap_page_sync(int, swp_entry_t, struct page *);
+
+/* linux/mm/swap_state.c */
+extern struct address_space swapper_space;
+#define total_swapcache_pages  swapper_space.nrpages
+extern void show_swap_cache_info(void);
+extern int add_to_swap(struct page *);
+extern void __delete_from_swap_cache(struct page *);
+extern void delete_from_swap_cache(struct page *);
+extern int move_to_swap_cache(struct page *, swp_entry_t);
+extern int move_from_swap_cache(struct page *, unsigned long,
+		struct address_space *);
+extern void free_page_and_swap_cache(struct page *);
+extern void free_pages_and_swap_cache(struct page **, int);
+extern struct page * lookup_swap_cache(swp_entry_t);
+extern struct page * read_swap_cache_async(swp_entry_t, struct vm_area_struct *vma,
+					   unsigned long addr);
+/* linux/mm/swapfile.c */
+extern long total_swap_pages;
+extern unsigned int nr_swapfiles;
+extern struct swap_info_struct swap_info[];
+extern void si_swapinfo(struct sysinfo *);
+extern swp_entry_t get_swap_page(void);
+extern int swap_duplicate(swp_entry_t);
+extern int valid_swaphandles(swp_entry_t, unsigned long *);
+extern void swap_free(swp_entry_t);
+extern void free_swap_and_cache(swp_entry_t);
+extern sector_t map_swap_page(struct swap_info_struct *, pgoff_t);
+extern struct swap_info_struct *get_swap_info_struct(unsigned);
+extern int can_share_swap_page(struct page *);
+extern int remove_exclusive_swap_page(struct page *);
+struct backing_dev_info;
+
+extern struct swap_list_t swap_list;
+extern spinlock_t swaplock;
+
+#define swap_list_lock()	spin_lock(&swaplock)
+#define swap_list_unlock()	spin_unlock(&swaplock)
+#define swap_device_lock(p)	spin_lock(&p->sdev_lock)
+#define swap_device_unlock(p)	spin_unlock(&p->sdev_lock)
+
+/* linux/mm/thrash.c */
+extern struct mm_struct * swap_token_mm;
+extern unsigned long swap_token_default_timeout;
+extern void grab_swap_token(void);
+extern void __put_swap_token(struct mm_struct *);
+
+static inline int has_swap_token(struct mm_struct *mm)
+{
+	return (mm == swap_token_mm);
+}
+
+static inline void put_swap_token(struct mm_struct *mm)
+{
+	if (has_swap_token(mm))
+		__put_swap_token(mm);
+}
+
+#else /* CONFIG_SWAP */
+
+#define total_swap_pages			0
+#define total_swapcache_pages			0UL
+
+#define si_swapinfo(val) \
+	do { (val)->freeswap = (val)->totalswap = 0; } while (0)
+#define free_page_and_swap_cache(page) \
+	page_cache_release(page)
+#define free_pages_and_swap_cache(pages, nr) \
+	release_pages((pages), (nr), 0);
+
+#define show_swap_cache_info()			/*NOTHING*/
+#define free_swap_and_cache(swp)		/*NOTHING*/
+#define swap_duplicate(swp)			/*NOTHING*/
+#define swap_free(swp)				/*NOTHING*/
+#define read_swap_cache_async(swp,vma,addr)	NULL
+#define lookup_swap_cache(swp)			NULL
+#define valid_swaphandles(swp, off)		0
+#define can_share_swap_page(p)			0
+#define move_to_swap_cache(p, swp)		1
+#define move_from_swap_cache(p, i, m)		1
+#define __delete_from_swap_cache(p)		/*NOTHING*/
+#define delete_from_swap_cache(p)		/*NOTHING*/
+#define swap_token_default_timeout		0
+
+static inline int remove_exclusive_swap_page(struct page *p)
+{
+	return 0;
+}
+
+static inline swp_entry_t get_swap_page(void)
+{
+	swp_entry_t entry;
+	entry.val = 0;
+	return entry;
+}
+
+/* linux/mm/thrash.c */
+#define put_swap_token(x) do { } while(0)
+#define grab_swap_token()  do { } while(0)
+#define has_swap_token(x) 0
+
+#endif /* CONFIG_SWAP */
+#endif /* __KERNEL__*/
+#endif /* _LINUX_SWAP_H */
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
new file mode 100644
index 000000000000..d4c7db35e708
--- /dev/null
+++ b/include/linux/swapops.h
@@ -0,0 +1,69 @@
+/*
+ * swapcache pages are stored in the swapper_space radix tree.  We want to
+ * get good packing density in that tree, so the index should be dense in
+ * the low-order bits.
+ *
+ * We arrange the `type' and `offset' fields so that `type' is at the five
+ * high-order bits of the smp_entry_t and `offset' is right-aligned in the
+ * remaining bits.
+ *
+ * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
+ */
+#define SWP_TYPE_SHIFT(e)	(sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
+
+/*
+ * Store a type+offset into a swp_entry_t in an arch-independent format
+ */
+static inline swp_entry_t swp_entry(unsigned long type, pgoff_t offset)
+{
+	swp_entry_t ret;
+
+	ret.val = (type << SWP_TYPE_SHIFT(ret)) |
+			(offset & SWP_OFFSET_MASK(ret));
+	return ret;
+}
+
+/*
+ * Extract the `type' field from a swp_entry_t.  The swp_entry_t is in
+ * arch-independent format
+ */
+static inline unsigned swp_type(swp_entry_t entry)
+{
+	return (entry.val >> SWP_TYPE_SHIFT(entry));
+}
+
+/*
+ * Extract the `offset' field from a swp_entry_t.  The swp_entry_t is in
+ * arch-independent format
+ */
+static inline pgoff_t swp_offset(swp_entry_t entry)
+{
+	return entry.val & SWP_OFFSET_MASK(entry);
+}
+
+/*
+ * Convert the arch-dependent pte representation of a swp_entry_t into an
+ * arch-independent swp_entry_t.
+ */
+static inline swp_entry_t pte_to_swp_entry(pte_t pte)
+{
+	swp_entry_t arch_entry;
+
+	BUG_ON(pte_file(pte));
+	arch_entry = __pte_to_swp_entry(pte);
+	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
+}
+
+/*
+ * Convert the arch-independent representation of a swp_entry_t into the
+ * arch-dependent pte representation.
+ */
+static inline pte_t swp_entry_to_pte(swp_entry_t entry)
+{
+	swp_entry_t arch_entry;
+
+	arch_entry = __swp_entry(swp_type(entry), swp_offset(entry));
+	BUG_ON(pte_file(__swp_entry_to_pte(arch_entry)));
+	return __swp_entry_to_pte(arch_entry);
+}
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
new file mode 100644
index 000000000000..763bd290f28d
--- /dev/null
+++ b/include/linux/synclink.h
@@ -0,0 +1,273 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.6 2002/02/20 21:58:20 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _SYNCLINK_H_
+#define _SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#define BOOLEAN int
+#define TRUE 1
+#define FALSE 0
+
+#define BIT0	0x0001
+#define BIT1	0x0002
+#define BIT2	0x0004
+#define BIT3	0x0008
+#define BIT4	0x0010
+#define BIT5	0x0020
+#define BIT6	0x0040
+#define BIT7	0x0080
+#define BIT8	0x0100
+#define BIT9	0x0200
+#define BIT10	0x0400
+#define BIT11	0x0800
+#define BIT12	0x1000
+#define BIT13	0x2000
+#define BIT14	0x4000
+#define BIT15	0x8000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE	65535
+#define MAX_ASYNC_TRANSMIT	4096
+#define MAX_ASYNC_BUFFER_SIZE	4096
+
+#define ASYNC_PARITY_NONE		0
+#define ASYNC_PARITY_EVEN		1
+#define ASYNC_PARITY_ODD		2
+#define ASYNC_PARITY_SPACE		3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
+#define HDLC_FLAG_UNDERRUN_CRC		0x0004
+#define HDLC_FLAG_SHARE_ZERO		0x0010
+#define HDLC_FLAG_AUTO_CTS		0x0020
+#define HDLC_FLAG_AUTO_DCD		0x0040
+#define HDLC_FLAG_AUTO_RTS		0x0080
+#define HDLC_FLAG_RXC_DPLL		0x0100
+#define HDLC_FLAG_RXC_BRG		0x0200
+#define HDLC_FLAG_RXC_TXCPIN		0x8000
+#define HDLC_FLAG_RXC_RXCPIN		0x0000
+#define HDLC_FLAG_TXC_DPLL		0x0400
+#define HDLC_FLAG_TXC_BRG		0x0800
+#define HDLC_FLAG_TXC_TXCPIN		0x0000
+#define HDLC_FLAG_TXC_RXCPIN		0x0008
+#define HDLC_FLAG_DPLL_DIV8		0x1000
+#define HDLC_FLAG_DPLL_DIV16		0x2000
+#define HDLC_FLAG_DPLL_DIV32		0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
+
+#define HDLC_CRC_NONE			0
+#define HDLC_CRC_16_CCITT		1
+#define HDLC_CRC_32_CCITT		2
+#define HDLC_CRC_MASK			0x00ff
+#define HDLC_CRC_RETURN_EX		0x8000
+
+#define RX_OK				0
+#define RX_CRC_ERROR			1
+
+#define HDLC_TXIDLE_FLAGS		0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
+#define HDLC_TXIDLE_ZEROS		2
+#define HDLC_TXIDLE_ONES		3
+#define HDLC_TXIDLE_ALT_MARK_SPACE	4
+#define HDLC_TXIDLE_SPACE		5
+#define HDLC_TXIDLE_MARK		6
+
+#define HDLC_ENCODING_NRZ			0
+#define HDLC_ENCODING_NRZB			1
+#define HDLC_ENCODING_NRZI_MARK			2
+#define HDLC_ENCODING_NRZI_SPACE		3
+#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK		4
+#define HDLC_ENCODING_BIPHASE_SPACE		5
+#define HDLC_ENCODING_BIPHASE_LEVEL		6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS	0
+#define HDLC_PREAMBLE_LENGTH_16BITS	1
+#define HDLC_PREAMBLE_LENGTH_32BITS	2
+#define HDLC_PREAMBLE_LENGTH_64BITS	3
+
+#define HDLC_PREAMBLE_PATTERN_NONE	0
+#define HDLC_PREAMBLE_PATTERN_ZEROS	1
+#define HDLC_PREAMBLE_PATTERN_FLAGS	2
+#define HDLC_PREAMBLE_PATTERN_10	3
+#define HDLC_PREAMBLE_PATTERN_01	4
+#define HDLC_PREAMBLE_PATTERN_ONES	5
+
+#define MGSL_MODE_ASYNC		1
+#define MGSL_MODE_HDLC		2
+#define MGSL_MODE_RAW		6
+
+#define MGSL_BUS_TYPE_ISA	1
+#define MGSL_BUS_TYPE_EISA	2
+#define MGSL_BUS_TYPE_PCI	5
+
+#define MGSL_INTERFACE_DISABLE  0
+#define MGSL_INTERFACE_RS232    1
+#define MGSL_INTERFACE_V35      2
+#define MGSL_INTERFACE_RS422    3
+
+typedef struct _MGSL_PARAMS
+{
+	/* Common */
+
+	unsigned long	mode;		/* Asynchronous or HDLC */
+	unsigned char	loopback;	/* internal loopback mode */
+
+	/* HDLC Only */
+
+	unsigned short	flags;
+	unsigned char	encoding;	/* NRZ, NRZI, etc. */
+	unsigned long	clock_speed;	/* external clock speed in bits per second */
+	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
+	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+
+	/* Async Only */
+
+	unsigned long	data_rate;	/* bits per second */
+	unsigned char	data_bits;	/* 7 or 8 data bits */
+	unsigned char	stop_bits;	/* 1 or 2 stop bits */
+	unsigned char	parity;		/* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK				0
+#define DiagStatus_AddressFailure		1
+#define DiagStatus_AddressConflict		2
+#define DiagStatus_IrqFailure			3
+#define DiagStatus_IrqConflict			4
+#define DiagStatus_DmaFailure			5
+#define DiagStatus_DmaConflict			6
+#define DiagStatus_PciAdapterNotFound		7
+#define DiagStatus_CantAssignPciResources	8
+#define DiagStatus_CantAssignPciMemAddr		9
+#define DiagStatus_CantAssignPciIoAddr		10
+#define DiagStatus_CantAssignPciIrq		11
+#define DiagStatus_MemoryError			12
+
+#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
+#define SerialSignal_TXD            0x02     /* Transmit Data */
+#define SerialSignal_RI             0x04     /* Ring Indicator */
+#define SerialSignal_RXD            0x08     /* Receive Data */
+#define SerialSignal_CTS            0x10     /* Clear to Send */
+#define SerialSignal_RTS            0x20     /* Request to Send */
+#define SerialSignal_DSR            0x40     /* Data Set Ready */
+#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+	__u32	txok;
+	__u32	txunder;
+	__u32	txabort;
+	__u32	txtimeout;
+	__u32	rxshort;
+	__u32	rxlong;
+	__u32	rxabort;
+	__u32	rxover;
+	__u32	rxcrc;
+	__u32	rxok;
+	__u32	exithunt;
+	__u32	rxidle;
+};
+
+
+#define DEBUG_LEVEL_DATA	1
+#define DEBUG_LEVEL_ERROR 	2
+#define DEBUG_LEVEL_INFO  	3
+#define DEBUG_LEVEL_BH    	4
+#define DEBUG_LEVEL_ISR		5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive	0x0001
+#define MgslEvent_DsrInactive	0x0002
+#define MgslEvent_Dsr		0x0003
+#define MgslEvent_CtsActive	0x0004
+#define MgslEvent_CtsInactive	0x0008
+#define MgslEvent_Cts		0x000c
+#define MgslEvent_DcdActive	0x0010
+#define MgslEvent_DcdInactive	0x0020
+#define MgslEvent_Dcd		0x0030
+#define MgslEvent_RiActive	0x0040
+#define MgslEvent_RiInactive	0x0080
+#define MgslEvent_Ri		0x00c0
+#define MgslEvent_ExitHuntMode	0x0100
+#define MgslEvent_IdleReceived	0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE	set current transmit idle mode
+ * MGSL_IOCGTXIDLE	get current transmit idle mode
+ * MGSL_IOCTXENABLE	enable or disable transmitter
+ * MGSL_IOCRXENABLE	enable or disable receiver
+ * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS	return current statistics
+ * MGSL_IOCWAITEVENT	wait for specified event to occur
+ * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
+ * MGSL_IOCSIF          set the serial interface type
+ * MGSL_IOCGIF          get the serial interface type
+ */
+#define MGSL_MAGIC_IOC	'm'
+#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
+
+#endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sys.h b/include/linux/sys.h
new file mode 100644
index 000000000000..daa6008bfdc8
--- /dev/null
+++ b/include/linux/sys.h
@@ -0,0 +1,29 @@
+#ifndef _LINUX_SYS_H
+#define _LINUX_SYS_H
+
+/*
+ * This file is no longer used or needed
+ */
+
+/*
+ * These are system calls that will be removed at some time
+ * due to newer versions existing..
+ * (please be careful - ibcs2 may need some of these).
+ */
+#ifdef notdef
+#define _sys_waitpid	_sys_old_syscall	/* _sys_wait4 */
+#define _sys_olduname	_sys_old_syscall	/* _sys_newuname */
+#define _sys_uname	_sys_old_syscall	/* _sys_newuname */
+#define _sys_stat	_sys_old_syscall	/* _sys_newstat */
+#define _sys_fstat	_sys_old_syscall	/* _sys_newfstat */
+#define _sys_lstat	_sys_old_syscall	/* _sys_newlstat */
+#define _sys_signal	_sys_old_syscall	/* _sys_sigaction */
+#define _sys_sgetmask	_sys_old_syscall	/* _sys_sigprocmask */
+#define _sys_ssetmask	_sys_old_syscall	/* _sys_sigprocmask */
+#endif
+
+/*
+ * These are system calls that haven't been implemented yet
+ * but have an entry in the table for future expansion..
+ */
+#endif
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
new file mode 100644
index 000000000000..757cd9be7743
--- /dev/null
+++ b/include/linux/syscalls.h
@@ -0,0 +1,509 @@
+/*
+ * syscalls.h - Linux syscall interfaces (non-arch-specific)
+ *
+ * Copyright (c) 2004 Randy Dunlap
+ * Copyright (c) 2004 Open Source Development Labs
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _LINUX_SYSCALLS_H
+#define _LINUX_SYSCALLS_H
+
+struct epoll_event;
+struct iattr;
+struct inode;
+struct iocb;
+struct io_event;
+struct iovec;
+struct itimerspec;
+struct itimerval;
+struct kexec_segment;
+struct linux_dirent;
+struct linux_dirent64;
+struct list_head;
+struct msgbuf;
+struct msghdr;
+struct msqid_ds;
+struct new_utsname;
+struct nfsctl_arg;
+struct __old_kernel_stat;
+struct pollfd;
+struct rlimit;
+struct rusage;
+struct sched_param;
+struct semaphore;
+struct sembuf;
+struct shmid_ds;
+struct sockaddr;
+struct stat;
+struct stat64;
+struct statfs;
+struct statfs64;
+struct __sysctl_args;
+struct sysinfo;
+struct timespec;
+struct timeval;
+struct timex;
+struct timezone;
+struct tms;
+struct utimbuf;
+struct mq_attr;
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/aio_abi.h>
+#include <linux/capability.h>
+#include <linux/list.h>
+#include <linux/sem.h>
+#include <asm/semaphore.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+#include <linux/quota.h>
+#include <linux/key.h>
+
+asmlinkage long sys_time(time_t __user *tloc);
+asmlinkage long sys_stime(time_t __user *tptr);
+asmlinkage long sys_gettimeofday(struct timeval __user *tv,
+				struct timezone __user *tz);
+asmlinkage long sys_settimeofday(struct timeval __user *tv,
+				struct timezone __user *tz);
+asmlinkage long sys_adjtimex(struct timex __user *txc_p);
+
+asmlinkage long sys_times(struct tms __user *tbuf);
+
+asmlinkage long sys_gettid(void);
+asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
+asmlinkage unsigned long sys_alarm(unsigned int seconds);
+asmlinkage long sys_getpid(void);
+asmlinkage long sys_getppid(void);
+asmlinkage long sys_getuid(void);
+asmlinkage long sys_geteuid(void);
+asmlinkage long sys_getgid(void);
+asmlinkage long sys_getegid(void);
+asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid);
+asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid);
+asmlinkage long sys_getpgid(pid_t pid);
+asmlinkage long sys_getpgrp(void);
+asmlinkage long sys_getsid(pid_t pid);
+asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist);
+
+asmlinkage long sys_setregid(gid_t rgid, gid_t egid);
+asmlinkage long sys_setgid(gid_t gid);
+asmlinkage long sys_setreuid(uid_t ruid, uid_t euid);
+asmlinkage long sys_setuid(uid_t uid);
+asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid);
+asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid);
+asmlinkage long sys_setfsuid(uid_t uid);
+asmlinkage long sys_setfsgid(gid_t gid);
+asmlinkage long sys_setpgid(pid_t pid, pid_t pgid);
+asmlinkage long sys_setsid(void);
+asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist);
+
+asmlinkage long sys_acct(const char __user *name);
+asmlinkage long sys_capget(cap_user_header_t header,
+				cap_user_data_t dataptr);
+asmlinkage long sys_capset(cap_user_header_t header,
+				const cap_user_data_t data);
+asmlinkage long sys_personality(u_long personality);
+
+asmlinkage long sys_sigpending(old_sigset_t __user *set);
+asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
+				old_sigset_t __user *oset);
+asmlinkage long sys_getitimer(int which, struct itimerval __user *value);
+asmlinkage long sys_setitimer(int which,
+				struct itimerval __user *value,
+				struct itimerval __user *ovalue);
+asmlinkage long sys_timer_create(clockid_t which_clock,
+				 struct sigevent __user *timer_event_spec,
+				 timer_t __user * created_timer_id);
+asmlinkage long sys_timer_gettime(timer_t timer_id,
+				struct itimerspec __user *setting);
+asmlinkage long sys_timer_getoverrun(timer_t timer_id);
+asmlinkage long sys_timer_settime(timer_t timer_id, int flags,
+				const struct itimerspec __user *new_setting,
+				struct itimerspec __user *old_setting);
+asmlinkage long sys_timer_delete(timer_t timer_id);
+asmlinkage long sys_clock_settime(clockid_t which_clock,
+				const struct timespec __user *tp);
+asmlinkage long sys_clock_gettime(clockid_t which_clock,
+				struct timespec __user *tp);
+asmlinkage long sys_clock_getres(clockid_t which_clock,
+				struct timespec __user *tp);
+asmlinkage long sys_clock_nanosleep(clockid_t which_clock, int flags,
+				const struct timespec __user *rqtp,
+				struct timespec __user *rmtp);
+
+asmlinkage long sys_nice(int increment);
+asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_setparam(pid_t pid,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_getscheduler(pid_t pid);
+asmlinkage long sys_sched_getparam(pid_t pid,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
+					unsigned long __user *user_mask_ptr);
+asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
+					unsigned long __user *user_mask_ptr);
+asmlinkage long sys_sched_yield(void);
+asmlinkage long sys_sched_get_priority_max(int policy);
+asmlinkage long sys_sched_get_priority_min(int policy);
+asmlinkage long sys_sched_rr_get_interval(pid_t pid,
+					struct timespec __user *interval);
+asmlinkage long sys_setpriority(int which, int who, int niceval);
+asmlinkage long sys_getpriority(int which, int who);
+
+asmlinkage long sys_shutdown(int, int);
+asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd,
+				void __user *arg);
+asmlinkage long sys_restart_syscall(void);
+asmlinkage long sys_kexec_load(void *entry, unsigned long nr_segments,
+			struct kexec_segment *segments, unsigned long flags);
+
+asmlinkage long sys_exit(int error_code);
+asmlinkage void sys_exit_group(int error_code);
+asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
+				int options, struct rusage __user *ru);
+asmlinkage long sys_waitid(int which, pid_t pid,
+			   struct siginfo __user *infop,
+			   int options, struct rusage __user *ru);
+asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options);
+asmlinkage long sys_set_tid_address(int __user *tidptr);
+asmlinkage long sys_futex(u32 __user *uaddr, int op, int val,
+			struct timespec __user *utime, u32 __user *uaddr2,
+			int val3);
+
+asmlinkage long sys_init_module(void __user *umod, unsigned long len,
+				const char __user *uargs);
+asmlinkage long sys_delete_module(const char __user *name_user,
+				unsigned int flags);
+
+asmlinkage long sys_rt_sigprocmask(int how, sigset_t __user *set,
+				sigset_t __user *oset, size_t sigsetsize);
+asmlinkage long sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize);
+asmlinkage long sys_rt_sigtimedwait(const sigset_t __user *uthese,
+				siginfo_t __user *uinfo,
+				const struct timespec __user *uts,
+				size_t sigsetsize);
+asmlinkage long sys_kill(int pid, int sig);
+asmlinkage long sys_tgkill(int tgid, int pid, int sig);
+asmlinkage long sys_tkill(int pid, int sig);
+asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
+asmlinkage long sys_sgetmask(void);
+asmlinkage long sys_ssetmask(int newmask);
+asmlinkage unsigned long sys_signal(int sig, __sighandler_t handler);
+asmlinkage long sys_pause(void);
+
+asmlinkage long sys_sync(void);
+asmlinkage long sys_fsync(unsigned int fd);
+asmlinkage long sys_fdatasync(unsigned int fd);
+asmlinkage long sys_bdflush(int func, long data);
+asmlinkage long sys_mount(char __user *dev_name, char __user *dir_name,
+				char __user *type, unsigned long flags,
+				void __user *data);
+asmlinkage long sys_umount(char __user *name, int flags);
+asmlinkage long sys_oldumount(char __user *name);
+asmlinkage long sys_truncate(const char __user *path,
+				unsigned long length);
+asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length);
+asmlinkage long sys_stat(char __user *filename,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_statfs(const char __user * path,
+				struct statfs __user *buf);
+asmlinkage long sys_statfs64(const char __user *path, size_t sz,
+				struct statfs64 __user *buf);
+asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user *buf);
+asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz,
+				struct statfs64 __user *buf);
+asmlinkage long sys_lstat(char __user *filename,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_fstat(unsigned int fd,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_newstat(char __user *filename,
+				struct stat __user *statbuf);
+asmlinkage long sys_newlstat(char __user *filename,
+				struct stat __user *statbuf);
+asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf);
+asmlinkage long sys_ustat(unsigned dev, struct ustat __user *ubuf);
+#if BITS_PER_LONG == 32
+asmlinkage long sys_stat64(char __user *filename,
+				struct stat64 __user *statbuf);
+asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
+asmlinkage long sys_lstat64(char __user *filename,
+				struct stat64 __user *statbuf);
+asmlinkage long sys_truncate64(const char __user *path, loff_t length);
+asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length);
+#endif
+
+asmlinkage long sys_setxattr(char __user *path, char __user *name,
+				void __user *value, size_t size, int flags);
+asmlinkage long sys_lsetxattr(char __user *path, char __user *name,
+				void __user *value, size_t size, int flags);
+asmlinkage long sys_fsetxattr(int fd, char __user *name, void __user *value,
+				size_t size, int flags);
+asmlinkage ssize_t sys_getxattr(char __user *path, char __user *name,
+				void __user *value, size_t size);
+asmlinkage ssize_t sys_lgetxattr(char __user *path, char __user *name,
+				void __user *value, size_t size);
+asmlinkage ssize_t sys_fgetxattr(int fd, char __user *name,
+				void __user *value, size_t size);
+asmlinkage ssize_t sys_listxattr(char __user *path, char __user *list,
+				size_t size);
+asmlinkage ssize_t sys_llistxattr(char __user *path, char __user *list,
+				size_t size);
+asmlinkage ssize_t sys_flistxattr(int fd, char __user *list, size_t size);
+asmlinkage long sys_removexattr(char __user *path, char __user *name);
+asmlinkage long sys_lremovexattr(char __user *path, char __user *name);
+asmlinkage long sys_fremovexattr(int fd, char __user *name);
+
+asmlinkage unsigned long sys_brk(unsigned long brk);
+asmlinkage long sys_mprotect(unsigned long start, size_t len,
+				unsigned long prot);
+asmlinkage unsigned long sys_mremap(unsigned long addr,
+				unsigned long old_len, unsigned long new_len,
+				unsigned long flags, unsigned long new_addr);
+asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
+			unsigned long prot, unsigned long pgoff,
+			unsigned long flags);
+asmlinkage long sys_msync(unsigned long start, size_t len, int flags);
+asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice);
+asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice);
+asmlinkage long sys_munmap(unsigned long addr, size_t len);
+asmlinkage long sys_mlock(unsigned long start, size_t len);
+asmlinkage long sys_munlock(unsigned long start, size_t len);
+asmlinkage long sys_mlockall(int flags);
+asmlinkage long sys_munlockall(void);
+asmlinkage long sys_madvise(unsigned long start, size_t len, int behavior);
+asmlinkage long sys_mincore(unsigned long start, size_t len,
+				unsigned char __user * vec);
+
+asmlinkage long sys_pivot_root(const char __user *new_root,
+				const char __user *put_old);
+asmlinkage long sys_chroot(const char __user *filename);
+asmlinkage long sys_mknod(const char __user *filename, int mode,
+				unsigned dev);
+asmlinkage long sys_link(const char __user *oldname,
+				const char __user *newname);
+asmlinkage long sys_symlink(const char __user *old, const char __user *new);
+asmlinkage long sys_unlink(const char __user *pathname);
+asmlinkage long sys_rename(const char __user *oldname,
+				const char __user *newname);
+asmlinkage long sys_chmod(const char __user *filename, mode_t mode);
+asmlinkage long sys_fchmod(unsigned int fd, mode_t mode);
+
+asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
+#if BITS_PER_LONG == 32
+asmlinkage long sys_fcntl64(unsigned int fd,
+				unsigned int cmd, unsigned long arg);
+#endif
+asmlinkage long sys_dup(unsigned int fildes);
+asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
+asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd,
+				unsigned long arg);
+asmlinkage long sys_flock(unsigned int fd, unsigned int cmd);
+asmlinkage long sys_io_setup(unsigned nr_reqs, aio_context_t __user *ctx);
+asmlinkage long sys_io_destroy(aio_context_t ctx);
+asmlinkage long sys_io_getevents(aio_context_t ctx_id,
+				long min_nr,
+				long nr,
+				struct io_event __user *events,
+				struct timespec __user *timeout);
+asmlinkage long sys_io_submit(aio_context_t, long,
+				struct iocb __user * __user *);
+asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
+			      struct io_event __user *result);
+asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd,
+				off_t __user *offset, size_t count);
+asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd,
+				loff_t __user *offset, size_t count);
+asmlinkage long sys_readlink(const char __user *path,
+				char __user *buf, int bufsiz);
+asmlinkage long sys_creat(const char __user *pathname, int mode);
+asmlinkage long sys_open(const char __user *filename,
+				int flags, int mode);
+asmlinkage long sys_close(unsigned int fd);
+asmlinkage long sys_access(const char __user *filename, int mode);
+asmlinkage long sys_vhangup(void);
+asmlinkage long sys_chown(const char __user *filename,
+				uid_t user, gid_t group);
+asmlinkage long sys_lchown(const char __user *filename,
+				uid_t user, gid_t group);
+asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
+#ifdef CONFIG_UID16
+asmlinkage long sys_chown16(const char __user *filename,
+				old_uid_t user, old_gid_t group);
+asmlinkage long sys_lchown16(const char __user *filename,
+				old_uid_t user, old_gid_t group);
+asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group);
+asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid);
+asmlinkage long sys_setgid16(old_gid_t gid);
+asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid);
+asmlinkage long sys_setuid16(old_uid_t uid);
+asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid);
+asmlinkage long sys_getresuid16(old_uid_t __user *ruid,
+				old_uid_t __user *euid, old_uid_t __user *suid);
+asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid);
+asmlinkage long sys_getresgid16(old_gid_t __user *rgid,
+				old_gid_t __user *egid, old_gid_t __user *sgid);
+asmlinkage long sys_setfsuid16(old_uid_t uid);
+asmlinkage long sys_setfsgid16(old_gid_t gid);
+asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist);
+asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist);
+asmlinkage long sys_getuid16(void);
+asmlinkage long sys_geteuid16(void);
+asmlinkage long sys_getgid16(void);
+asmlinkage long sys_getegid16(void);
+#endif
+
+asmlinkage long sys_utime(char __user *filename,
+				struct utimbuf __user *times);
+asmlinkage long sys_utimes(char __user *filename,
+				struct timeval __user *utimes);
+asmlinkage off_t sys_lseek(unsigned int fd, off_t offset,
+				unsigned int origin);
+asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
+			unsigned long offset_low, loff_t __user *result,
+			unsigned int origin);
+asmlinkage ssize_t sys_read(unsigned int fd, char __user *buf,
+				size_t count);
+asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count);
+asmlinkage ssize_t sys_readv(unsigned long fd,
+				const struct iovec __user *vec,
+				unsigned long vlen);
+asmlinkage ssize_t sys_write(unsigned int fd, const char __user *buf,
+				size_t count);
+asmlinkage ssize_t sys_writev(unsigned long fd,
+				const struct iovec __user *vec,
+				unsigned long vlen);
+asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
+				size_t count, loff_t pos);
+asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
+				size_t count, loff_t pos);
+asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
+asmlinkage long sys_mkdir(const char __user *pathname, int mode);
+asmlinkage long sys_chdir(const char __user *filename);
+asmlinkage long sys_fchdir(unsigned int fd);
+asmlinkage long sys_rmdir(const char __user *pathname);
+asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user *buf, size_t len);
+asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special,
+				qid_t id, void __user *addr);
+asmlinkage long sys_getdents(unsigned int fd,
+				struct linux_dirent __user *dirent,
+				unsigned int count);
+asmlinkage long sys_getdents64(unsigned int fd,
+				struct linux_dirent64 __user *dirent,
+				unsigned int count);
+
+asmlinkage long sys_setsockopt(int fd, int level, int optname,
+				char __user *optval, int optlen);
+asmlinkage long sys_getsockopt(int fd, int level, int optname,
+				char __user *optval, int __user *optlen);
+asmlinkage long sys_bind(int, struct sockaddr __user *, int);
+asmlinkage long sys_connect(int, struct sockaddr __user *, int);
+asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_send(int, void __user *, size_t, unsigned);
+asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
+				struct sockaddr __user *, int);
+asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
+asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
+				struct sockaddr __user *, int __user *);
+asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_socket(int, int, int);
+asmlinkage long sys_socketpair(int, int, int, int __user *);
+asmlinkage long sys_socketcall(int call, unsigned long __user *args);
+asmlinkage long sys_listen(int, int);
+asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+				long timeout);
+asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+			fd_set __user *exp, struct timeval __user *tvp);
+asmlinkage long sys_epoll_create(int size);
+asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
+				struct epoll_event __user *event);
+asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
+				int maxevents, int timeout);
+asmlinkage long sys_gethostname(char __user *name, int len);
+asmlinkage long sys_sethostname(char __user *name, int len);
+asmlinkage long sys_setdomainname(char __user *name, int len);
+asmlinkage long sys_newuname(struct new_utsname __user *name);
+
+asmlinkage long sys_getrlimit(unsigned int resource,
+				struct rlimit __user *rlim);
+#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64) || defined(CONFIG_V850))
+asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim);
+#endif
+asmlinkage long sys_setrlimit(unsigned int resource,
+				struct rlimit __user *rlim);
+asmlinkage long sys_getrusage(int who, struct rusage __user *ru);
+asmlinkage long sys_umask(int mask);
+
+asmlinkage long sys_msgget(key_t key, int msgflg);
+asmlinkage long sys_msgsnd(int msqid, struct msgbuf __user *msgp,
+				size_t msgsz, int msgflg);
+asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp,
+				size_t msgsz, long msgtyp, int msgflg);
+asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf);
+
+asmlinkage long sys_semget(key_t key, int nsems, int semflg);
+asmlinkage long sys_semop(int semid, struct sembuf __user *sops,
+				unsigned nsops);
+asmlinkage long sys_semctl(int semid, int semnum, int cmd, union semun arg);
+asmlinkage long sys_semtimedop(int semid, struct sembuf __user *sops,
+				unsigned nsops,
+				const struct timespec __user *timeout);
+asmlinkage long sys_shmat(int shmid, char __user *shmaddr,
+				int shmflg, unsigned long __user *addr);
+asmlinkage long sys_shmget(key_t key, size_t size, int flag);
+asmlinkage long sys_shmdt(char __user *shmaddr);
+asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
+
+asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
+asmlinkage long sys_mq_unlink(const char __user *name);
+asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
+asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
+
+asmlinkage long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn);
+asmlinkage long sys_pciconfig_read(unsigned long bus, unsigned long dfn,
+				unsigned long off, unsigned long len,
+				void __user *buf);
+asmlinkage long sys_pciconfig_write(unsigned long bus, unsigned long dfn,
+				unsigned long off, unsigned long len,
+				void __user *buf);
+
+asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
+			unsigned long arg4, unsigned long arg5);
+asmlinkage long sys_swapon(const char __user *specialfile, int swap_flags);
+asmlinkage long sys_swapoff(const char __user *specialfile);
+asmlinkage long sys_sysctl(struct __sysctl_args __user *args);
+asmlinkage long sys_sysinfo(struct sysinfo __user *info);
+asmlinkage long sys_sysfs(int option,
+				unsigned long arg1, unsigned long arg2);
+asmlinkage long sys_nfsservctl(int cmd,
+				struct nfsctl_arg __user *arg,
+				void __user *res);
+asmlinkage long sys_syslog(int type, char __user *buf, int len);
+asmlinkage long sys_uselib(const char __user *library);
+asmlinkage long sys_ni_syscall(void);
+
+asmlinkage long sys_add_key(const char __user *_type,
+			    const char __user *_description,
+			    const void __user *_payload,
+			    size_t plen,
+			    key_serial_t destringid);
+
+asmlinkage long sys_request_key(const char __user *_type,
+				const char __user *_description,
+				const char __user *_callout_info,
+				key_serial_t destringid);
+
+asmlinkage long sys_keyctl(int cmd, unsigned long arg2, unsigned long arg3,
+			   unsigned long arg4, unsigned long arg5);
+
+#endif
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
new file mode 100644
index 000000000000..358d52b0c445
--- /dev/null
+++ b/include/linux/sysctl.h
@@ -0,0 +1,898 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ **  The values in this file are exported to user space via 
+ **  the sysctl() binary interface.  However this interface
+ **  is unstable and deprecated and will be removed in the future. 
+ **  For a stable interface use /proc/sys.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _LINUX_SYSCTL_H
+#define _LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/compiler.h>
+
+struct file;
+
+#define CTL_MAXNAME 10		/* how many path components do we allow in a
+				   call to sysctl?   In other words, what is
+				   the largest acceptable value for the nlen
+				   member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+	int __user *name;
+	int nlen;
+	void __user *oldval;
+	size_t __user *oldlenp;
+	void __user *newval;
+	size_t newlen;
+	unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+/* For internal pattern-matching use only: */
+#ifdef __KERNEL__
+#define CTL_ANY		-1	/* Matches any name */
+#define CTL_NONE	0
+#endif
+
+enum
+{
+	CTL_KERN=1,		/* General kernel info and control */
+	CTL_VM=2,		/* VM management */
+	CTL_NET=3,		/* Networking */
+	CTL_PROC=4,		/* Process info */
+	CTL_FS=5,		/* Filesystems */
+	CTL_DEBUG=6,		/* Debugging */
+	CTL_DEV=7,		/* Devices */
+	CTL_BUS=8,		/* Busses */
+	CTL_ABI=9,		/* Binary emulation */
+	CTL_CPU=10		/* CPU stuff (speed scaling, etc) */
+};
+
+/* CTL_BUS names: */
+enum
+{
+	CTL_BUS_ISA=1		/* ISA */
+};
+
+/* CTL_KERN names: */
+enum
+{
+	KERN_OSTYPE=1,		/* string: system version */
+	KERN_OSRELEASE=2,	/* string: system release */
+	KERN_OSREV=3,		/* int: system revision */
+	KERN_VERSION=4,		/* string: compile time info */
+	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
+	KERN_PROF=6,		/* table: profiling information */
+	KERN_NODENAME=7,
+	KERN_DOMAINNAME=8,
+
+	KERN_CAP_BSET=14,	/* int: capability bounding set */
+	KERN_PANIC=15,		/* int: panic timeout */
+	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
+
+	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
+	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
+	KERN_PRINTK=23,		/* struct: control printk logging parameters */
+	KERN_NAMETRANS=24,	/* Name translation */
+	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
+	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+	KERN_MODPROBE=28,
+	KERN_SG_BIG_BUFF=29,
+	KERN_ACCT=30,		/* BSD process accounting parameters */
+	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
+
+	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
+	KERN_RTSIGMAX=33,	/* Max queuable */
+	
+	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
+	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
+	KERN_MSGMNB=36,         /* int: Maximum message queue size */
+	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
+	KERN_SYSRQ=38,		/* int: Sysreq enable */
+	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
+ 	KERN_RANDOM=40,		/* Random driver */
+ 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
+ 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
+ 	KERN_SEM=43,		/* struct: sysv semaphore limits */
+ 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+ 	KERN_SHMMNI=45,		/* int: shm array identifiers */
+	KERN_OVERFLOWUID=46,	/* int: overflow UID */
+	KERN_OVERFLOWGID=47,	/* int: overflow GID */
+	KERN_SHMPATH=48,	/* string: path to shm fs */
+	KERN_HOTPLUG=49,	/* string: path to hotplug policy agent */
+	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
+	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
+	KERN_TAINTED=53,	/* int: various kernel tainted flags */
+	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
+	KERN_PIDMAX=55,		/* int: PID # limit */
+  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
+	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
+	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
+	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
+	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
+	KERN_PTY=62,		/* dir: pty driver */
+	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
+	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
+	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+};
+
+
+/* CTL_VM names: */
+enum
+{
+	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
+	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
+	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
+	VM_UNUSED4=4,		/* Spare */
+	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
+	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
+	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
+	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
+	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
+	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
+	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
+	VM_DIRTY_RATIO=12,	/* dirty_ratio */
+	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
+	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
+	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
+	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
+	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
+	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
+	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
+	VM_LAPTOP_MODE=23,	/* vm laptop mode */
+	VM_BLOCK_DUMP=24,	/* block dump mode */
+	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
+	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+	NET_CORE=1,
+	NET_ETHER=2,
+	NET_802=3,
+	NET_UNIX=4,
+	NET_IPV4=5,
+	NET_IPX=6,
+	NET_ATALK=7,
+	NET_NETROM=8,
+	NET_AX25=9,
+	NET_BRIDGE=10,
+	NET_ROSE=11,
+	NET_IPV6=12,
+	NET_X25=13,
+	NET_TR=14,
+	NET_DECNET=15,
+	NET_ECONET=16,
+	NET_SCTP=17, 
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+	RANDOM_POOLSIZE=1,
+	RANDOM_ENTROPY_COUNT=2,
+	RANDOM_READ_THRESH=3,
+	RANDOM_WRITE_THRESH=4,
+	RANDOM_BOOT_ID=5,
+	RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+	PTY_MAX=1,
+	PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+	BUS_ISA_MEM_BASE=1,
+	BUS_ISA_PORT_BASE=2,
+	BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+	NET_CORE_WMEM_MAX=1,
+	NET_CORE_RMEM_MAX=2,
+	NET_CORE_WMEM_DEFAULT=3,
+	NET_CORE_RMEM_DEFAULT=4,
+/* was	NET_CORE_DESTROY_DELAY */
+	NET_CORE_MAX_BACKLOG=6,
+	NET_CORE_FASTROUTE=7,
+	NET_CORE_MSG_COST=8,
+	NET_CORE_MSG_BURST=9,
+	NET_CORE_OPTMEM_MAX=10,
+	NET_CORE_HOT_LIST_LENGTH=11,
+	NET_CORE_DIVERT_VERSION=12,
+	NET_CORE_NO_CONG_THRESH=13,
+	NET_CORE_NO_CONG=14,
+	NET_CORE_LO_CONG=15,
+	NET_CORE_MOD_CONG=16,
+	NET_CORE_DEV_WEIGHT=17,
+	NET_CORE_SOMAXCONN=18,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+	NET_UNIX_DESTROY_DELAY=1,
+	NET_UNIX_DELETE_DELAY=2,
+	NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+	/* v2.0 compatibile variables */
+	NET_IPV4_FORWARD=8,
+	NET_IPV4_DYNADDR=9,
+
+	NET_IPV4_CONF=16,
+	NET_IPV4_NEIGH=17,
+	NET_IPV4_ROUTE=18,
+	NET_IPV4_FIB_HASH=19,
+	NET_IPV4_NETFILTER=20,
+
+	NET_IPV4_TCP_TIMESTAMPS=33,
+	NET_IPV4_TCP_WINDOW_SCALING=34,
+	NET_IPV4_TCP_SACK=35,
+	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+	NET_IPV4_DEFAULT_TTL=37,
+	NET_IPV4_AUTOCONFIG=38,
+	NET_IPV4_NO_PMTU_DISC=39,
+	NET_IPV4_TCP_SYN_RETRIES=40,
+	NET_IPV4_IPFRAG_HIGH_THRESH=41,
+	NET_IPV4_IPFRAG_LOW_THRESH=42,
+	NET_IPV4_IPFRAG_TIME=43,
+	NET_IPV4_TCP_MAX_KA_PROBES=44,
+	NET_IPV4_TCP_KEEPALIVE_TIME=45,
+	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+	NET_IPV4_TCP_RETRIES1=47,
+	NET_IPV4_TCP_RETRIES2=48,
+	NET_IPV4_TCP_FIN_TIMEOUT=49,
+	NET_IPV4_IP_MASQ_DEBUG=50,
+	NET_TCP_SYNCOOKIES=51,
+	NET_TCP_STDURG=52,
+	NET_TCP_RFC1337=53,
+	NET_TCP_SYN_TAILDROP=54,
+	NET_TCP_MAX_SYN_BACKLOG=55,
+	NET_IPV4_LOCAL_PORT_RANGE=56,
+	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+	NET_IPV4_ICMP_PARAMPROB_RATE=62,
+	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+	NET_TCP_TW_RECYCLE=66,
+	NET_IPV4_ALWAYS_DEFRAG=67,
+	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+	NET_IPV4_INET_PEER_THRESHOLD=69,
+	NET_IPV4_INET_PEER_MINTTL=70,
+	NET_IPV4_INET_PEER_MAXTTL=71,
+	NET_IPV4_INET_PEER_GC_MINTIME=72,
+	NET_IPV4_INET_PEER_GC_MAXTIME=73,
+	NET_TCP_ORPHAN_RETRIES=74,
+	NET_TCP_ABORT_ON_OVERFLOW=75,
+	NET_TCP_SYNACK_RETRIES=76,
+	NET_TCP_MAX_ORPHANS=77,
+	NET_TCP_MAX_TW_BUCKETS=78,
+	NET_TCP_FACK=79,
+	NET_TCP_REORDERING=80,
+	NET_TCP_ECN=81,
+	NET_TCP_DSACK=82,
+	NET_TCP_MEM=83,
+	NET_TCP_WMEM=84,
+	NET_TCP_RMEM=85,
+	NET_TCP_APP_WIN=86,
+	NET_TCP_ADV_WIN_SCALE=87,
+	NET_IPV4_NONLOCAL_BIND=88,
+	NET_IPV4_ICMP_RATELIMIT=89,
+	NET_IPV4_ICMP_RATEMASK=90,
+	NET_TCP_TW_REUSE=91,
+	NET_TCP_FRTO=92,
+	NET_TCP_LOW_LATENCY=93,
+	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+	NET_TCP_WESTWOOD=95,
+	NET_IPV4_IGMP_MAX_MSF=96,
+	NET_TCP_NO_METRICS_SAVE=97,
+	NET_TCP_VEGAS=98,
+	NET_TCP_VEGAS_ALPHA=99,
+	NET_TCP_VEGAS_BETA=100,
+	NET_TCP_VEGAS_GAMMA=101,
+ 	NET_TCP_BIC=102,
+ 	NET_TCP_BIC_FAST_CONVERGENCE=103,
+	NET_TCP_BIC_LOW_WINDOW=104,
+	NET_TCP_DEFAULT_WIN_SCALE=105,
+	NET_TCP_MODERATE_RCVBUF=106,
+	NET_TCP_TSO_WIN_DIVISOR=107,
+	NET_TCP_BIC_BETA=108,
+};
+
+enum {
+	NET_IPV4_ROUTE_FLUSH=1,
+	NET_IPV4_ROUTE_MIN_DELAY=2,
+	NET_IPV4_ROUTE_MAX_DELAY=3,
+	NET_IPV4_ROUTE_GC_THRESH=4,
+	NET_IPV4_ROUTE_MAX_SIZE=5,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+	NET_IPV4_ROUTE_GC_TIMEOUT=7,
+	NET_IPV4_ROUTE_GC_INTERVAL=8,
+	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+	NET_IPV4_ROUTE_ERROR_COST=12,
+	NET_IPV4_ROUTE_ERROR_BURST=13,
+	NET_IPV4_ROUTE_GC_ELASTICITY=14,
+	NET_IPV4_ROUTE_MTU_EXPIRES=15,
+	NET_IPV4_ROUTE_MIN_PMTU=16,
+	NET_IPV4_ROUTE_MIN_ADVMSS=17,
+	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+	NET_PROTO_CONF_ALL=-2,
+	NET_PROTO_CONF_DEFAULT=-3
+
+	/* And device ifindices ... */
+};
+
+enum
+{
+	NET_IPV4_CONF_FORWARDING=1,
+	NET_IPV4_CONF_MC_FORWARDING=2,
+	NET_IPV4_CONF_PROXY_ARP=3,
+	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+	NET_IPV4_CONF_SECURE_REDIRECTS=5,
+	NET_IPV4_CONF_SEND_REDIRECTS=6,
+	NET_IPV4_CONF_SHARED_MEDIA=7,
+	NET_IPV4_CONF_RP_FILTER=8,
+	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+	NET_IPV4_CONF_BOOTP_RELAY=10,
+	NET_IPV4_CONF_LOG_MARTIANS=11,
+	NET_IPV4_CONF_TAG=12,
+	NET_IPV4_CONF_ARPFILTER=13,
+	NET_IPV4_CONF_MEDIUM_ID=14,
+	NET_IPV4_CONF_NOXFRM=15,
+	NET_IPV4_CONF_NOPOLICY=16,
+	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+	NET_IPV4_CONF_ARP_ANNOUNCE=18,
+	NET_IPV4_CONF_ARP_IGNORE=19,
+	__NET_IPV4_CONF_MAX
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+	NET_IPV4_NF_CONNTRACK_MAX=1,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_IPV4_NF_CONNTRACK_COUNT=27,
+};
+ 
+/* /proc/sys/net/ipv6 */
+enum {
+	NET_IPV6_CONF=16,
+	NET_IPV6_NEIGH=17,
+	NET_IPV6_ROUTE=18,
+	NET_IPV6_ICMP=19,
+	NET_IPV6_BINDV6ONLY=20,
+	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+	NET_IPV6_IP6FRAG_LOW_THRESH=22,
+	NET_IPV6_IP6FRAG_TIME=23,
+	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+	NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+	NET_IPV6_ROUTE_FLUSH=1,
+	NET_IPV6_ROUTE_GC_THRESH=2,
+	NET_IPV6_ROUTE_MAX_SIZE=3,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+	NET_IPV6_ROUTE_GC_TIMEOUT=5,
+	NET_IPV6_ROUTE_GC_INTERVAL=6,
+	NET_IPV6_ROUTE_GC_ELASTICITY=7,
+	NET_IPV6_ROUTE_MTU_EXPIRES=8,
+	NET_IPV6_ROUTE_MIN_ADVMSS=9,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+	NET_IPV6_FORWARDING=1,
+	NET_IPV6_HOP_LIMIT=2,
+	NET_IPV6_MTU=3,
+	NET_IPV6_ACCEPT_RA=4,
+	NET_IPV6_ACCEPT_REDIRECTS=5,
+	NET_IPV6_AUTOCONF=6,
+	NET_IPV6_DAD_TRANSMITS=7,
+	NET_IPV6_RTR_SOLICITS=8,
+	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+	NET_IPV6_RTR_SOLICIT_DELAY=10,
+	NET_IPV6_USE_TEMPADDR=11,
+	NET_IPV6_TEMP_VALID_LFT=12,
+	NET_IPV6_TEMP_PREFERED_LFT=13,
+	NET_IPV6_REGEN_MAX_RETRY=14,
+	NET_IPV6_MAX_DESYNC_FACTOR=15,
+	NET_IPV6_MAX_ADDRESSES=16,
+	NET_IPV6_FORCE_MLD_VERSION=17,
+	__NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+	NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+	NET_NEIGH_MCAST_SOLICIT=1,
+	NET_NEIGH_UCAST_SOLICIT=2,
+	NET_NEIGH_APP_SOLICIT=3,
+	NET_NEIGH_RETRANS_TIME=4,
+	NET_NEIGH_REACHABLE_TIME=5,
+	NET_NEIGH_DELAY_PROBE_TIME=6,
+	NET_NEIGH_GC_STALE_TIME=7,
+	NET_NEIGH_UNRES_QLEN=8,
+	NET_NEIGH_PROXY_QLEN=9,
+	NET_NEIGH_ANYCAST_DELAY=10,
+	NET_NEIGH_PROXY_DELAY=11,
+	NET_NEIGH_LOCKTIME=12,
+	NET_NEIGH_GC_INTERVAL=13,
+	NET_NEIGH_GC_THRESH1=14,
+	NET_NEIGH_GC_THRESH2=15,
+	NET_NEIGH_GC_THRESH3=16,
+	NET_NEIGH_RETRANS_TIME_MS=17,
+	NET_NEIGH_REACHABLE_TIME_MS=18,
+	__NET_NEIGH_MAX
+};
+
+/* /proc/sys/net/ipx */
+enum {
+	NET_IPX_PPROP_BROADCASTING=1,
+	NET_IPX_FORWARDING=2
+};
+
+
+/* /proc/sys/net/appletalk */
+enum {
+	NET_ATALK_AARP_EXPIRY_TIME=1,
+	NET_ATALK_AARP_TICK_TIME=2,
+	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+	NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+	NET_NETROM_DEFAULT_PATH_QUALITY=1,
+	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+	NET_NETROM_NETWORK_TTL_INITIALISER=3,
+	NET_NETROM_TRANSPORT_TIMEOUT=4,
+	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+	NET_NETROM_ROUTING_CONTROL=10,
+	NET_NETROM_LINK_FAILS_COUNT=11
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+	NET_AX25_IP_DEFAULT_MODE=1,
+	NET_AX25_DEFAULT_MODE=2,
+	NET_AX25_BACKOFF_TYPE=3,
+	NET_AX25_CONNECT_MODE=4,
+	NET_AX25_STANDARD_WINDOW=5,
+	NET_AX25_EXTENDED_WINDOW=6,
+	NET_AX25_T1_TIMEOUT=7,
+	NET_AX25_T2_TIMEOUT=8,
+	NET_AX25_T3_TIMEOUT=9,
+	NET_AX25_IDLE_TIMEOUT=10,
+	NET_AX25_N2=11,
+	NET_AX25_PACLEN=12,
+	NET_AX25_PROTOCOL=13,
+	NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_ROSE_ROUTING_CONTROL=6,
+	NET_ROSE_LINK_FAIL_TIMEOUT=7,
+	NET_ROSE_MAX_VCS=8,
+	NET_ROSE_WINDOW_SIZE=9,
+	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+	NET_X25_RESTART_REQUEST_TIMEOUT=1,
+	NET_X25_CALL_REQUEST_TIMEOUT=2,
+	NET_X25_RESET_REQUEST_TIMEOUT=3,
+	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+	NET_X25_ACK_HOLD_BACK_TIMEOUT=5
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+	NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+	NET_DECNET_NODE_TYPE = 1,
+	NET_DECNET_NODE_ADDRESS = 2,
+	NET_DECNET_NODE_NAME = 3,
+	NET_DECNET_DEFAULT_DEVICE = 4,
+	NET_DECNET_TIME_WAIT = 5,
+	NET_DECNET_DN_COUNT = 6,
+	NET_DECNET_DI_COUNT = 7,
+	NET_DECNET_DR_COUNT = 8,
+	NET_DECNET_DST_GC_INTERVAL = 9,
+	NET_DECNET_CONF = 10,
+	NET_DECNET_NO_FC_MAX_CWND = 11,
+	NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+	NET_DECNET_CONF_LOOPBACK = -2,
+	NET_DECNET_CONF_DDCMP = -3,
+	NET_DECNET_CONF_PPP = -4,
+	NET_DECNET_CONF_X25 = -5,
+	NET_DECNET_CONF_GRE = -6,
+	NET_DECNET_CONF_ETHER = -7
+
+	/* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+	NET_DECNET_CONF_DEV_PRIORITY = 1,
+	NET_DECNET_CONF_DEV_T1 = 2,
+	NET_DECNET_CONF_DEV_T2 = 3,
+	NET_DECNET_CONF_DEV_T3 = 4,
+	NET_DECNET_CONF_DEV_FORWARDING = 5,
+	NET_DECNET_CONF_DEV_BLKSIZE = 6,
+	NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+	NET_SCTP_RTO_INITIAL = 1,
+	NET_SCTP_RTO_MIN     = 2,
+	NET_SCTP_RTO_MAX     = 3,
+	NET_SCTP_RTO_ALPHA   = 4,
+	NET_SCTP_RTO_BETA    = 5,
+	NET_SCTP_VALID_COOKIE_LIFE       =  6,
+	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
+	NET_SCTP_PATH_MAX_RETRANS        =  8,
+	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
+	NET_SCTP_HB_INTERVAL             = 10,
+	NET_SCTP_PRESERVE_ENABLE         = 11,
+	NET_SCTP_MAX_BURST               = 12,
+	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_PRSCTP_ENABLE		 = 14,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+	NET_BRIDGE_NF_CALL_IPTABLES = 2,
+	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+};
+
+/* CTL_PROC names: */
+
+/* CTL_FS names: */
+enum
+{
+	FS_NRINODE=1,	/* int:current number of allocated inodes */
+	FS_STATINODE=2,
+	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
+	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
+	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
+	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
+	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
+	FS_DENTRY=8,
+	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
+	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
+	FS_OVERFLOWUID=11,	/* int: overflow UID */
+	FS_OVERFLOWGID=12,	/* int: overflow GID */
+	FS_LEASES=13,	/* int: leases enabled */
+	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
+	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
+	FS_DQSTATS=16,	/* disc quota usage statistics and control */
+	FS_XFS=17,	/* struct: control xfs parameters */
+	FS_AIO_NR=18,	/* current system-wide number of aio requests */
+	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+	FS_DQ_LOOKUPS = 1,
+	FS_DQ_DROPS = 2,
+	FS_DQ_READS = 3,
+	FS_DQ_WRITES = 4,
+	FS_DQ_CACHE_HITS = 5,
+	FS_DQ_ALLOCATED = 6,
+	FS_DQ_FREE = 7,
+	FS_DQ_SYNCS = 8,
+	FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+	DEV_CDROM=1,
+	DEV_HWMON=2,
+	DEV_PARPORT=3,
+	DEV_RAID=4,
+	DEV_MAC_HID=5,
+	DEV_SCSI=6,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+	DEV_CDROM_INFO=1,
+	DEV_CDROM_AUTOCLOSE=2,
+	DEV_CDROM_AUTOEJECT=3,
+	DEV_CDROM_DEBUG=4,
+	DEV_CDROM_LOCK=5,
+	DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+	DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+	DEV_RAID_SPEED_LIMIT_MIN=1,
+	DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+	DEV_PARPORT_DEFAULT_TIMESLICE=1,
+	DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+	DEV_PARPORT_SPINTIME=1,
+	DEV_PARPORT_BASE_ADDR=2,
+	DEV_PARPORT_IRQ=3,
+	DEV_PARPORT_DMA=4,
+	DEV_PARPORT_MODES=5,
+	DEV_PARPORT_DEVICES=6,
+	DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+	DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+	DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+	DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
+	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
+	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+	ABI_TRACE=5,		/* tracing flags */
+	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
+};
+
+#ifdef __KERNEL__
+
+extern void sysctl_init(void);
+
+typedef struct ctl_table ctl_table;
+
+typedef int ctl_handler (ctl_table *table, int __user *name, int nlen,
+			 void __user *oldval, size_t __user *oldlenp,
+			 void __user *newval, size_t newlen, 
+			 void **context);
+
+typedef int proc_handler (ctl_table *ctl, int write, struct file * filp,
+			  void __user *buffer, size_t *lenp, loff_t *ppos);
+
+extern int proc_dostring(ctl_table *, int, struct file *,
+			 void __user *, size_t *, loff_t *);
+extern int proc_dointvec(ctl_table *, int, struct file *,
+			 void __user *, size_t *, loff_t *);
+extern int proc_dointvec_bset(ctl_table *, int, struct file *,
+			      void __user *, size_t *, loff_t *);
+extern int proc_dointvec_minmax(ctl_table *, int, struct file *,
+				void __user *, size_t *, loff_t *);
+extern int proc_dointvec_jiffies(ctl_table *, int, struct file *,
+				 void __user *, size_t *, loff_t *);
+extern int proc_dointvec_userhz_jiffies(ctl_table *, int, struct file *,
+					void __user *, size_t *, loff_t *);
+extern int proc_dointvec_ms_jiffies(ctl_table *, int, struct file *,
+				    void __user *, size_t *, loff_t *);
+extern int proc_doulongvec_minmax(ctl_table *, int, struct file *,
+				  void __user *, size_t *, loff_t *);
+extern int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int,
+				      struct file *, void __user *, size_t *, loff_t *);
+
+extern int do_sysctl (int __user *name, int nlen,
+		      void __user *oldval, size_t __user *oldlenp,
+		      void __user *newval, size_t newlen);
+
+extern int do_sysctl_strategy (ctl_table *table, 
+			       int __user *name, int nlen,
+			       void __user *oldval, size_t __user *oldlenp,
+			       void __user *newval, size_t newlen, void ** context);
+
+extern ctl_handler sysctl_string;
+extern ctl_handler sysctl_intvec;
+extern ctl_handler sysctl_jiffies;
+extern ctl_handler sysctl_ms_jiffies;
+
+
+/*
+ * Register a set of sysctl names by calling register_sysctl_table
+ * with an initialised array of ctl_table's.  An entry with zero
+ * ctl_name terminates the table.  table->de will be set up by the
+ * registration and need not be initialised in advance.
+ *
+ * sysctl names can be mirrored automatically under /proc/sys.  The
+ * procname supplied controls /proc naming.
+ *
+ * The table's mode will be honoured both for sys_sysctl(2) and
+ * proc-fs access.
+ *
+ * Leaf nodes in the sysctl tree will be represented by a single file
+ * under /proc; non-leaf nodes will be represented by directories.  A
+ * null procname disables /proc mirroring at this node.
+ * 
+ * sysctl(2) can automatically manage read and write requests through
+ * the sysctl table.  The data and maxlen fields of the ctl_table
+ * struct enable minimal validation of the values being written to be
+ * performed, and the mode field allows minimal authentication.
+ * 
+ * More sophisticated management can be enabled by the provision of a
+ * strategy routine with the table entry.  This will be called before
+ * any automatic read or write of the data is performed.
+ * 
+ * The strategy routine may return:
+ * <0: Error occurred (error is passed to user process)
+ * 0:  OK - proceed with automatic read or write.
+ * >0: OK - read or write has been done by the strategy routine, so 
+ *     return immediately.
+ * 
+ * There must be a proc_handler routine for any terminal nodes
+ * mirrored under /proc/sys (non-terminals are handled by a built-in
+ * directory handler).  Several default handlers are available to
+ * cover common cases.
+ */
+
+/* A sysctl table is an array of struct ctl_table: */
+struct ctl_table 
+{
+	int ctl_name;			/* Binary ID */
+	const char *procname;		/* Text ID for /proc/sys, or zero */
+	void *data;
+	int maxlen;
+	mode_t mode;
+	ctl_table *child;
+	proc_handler *proc_handler;	/* Callback for text formatting */
+	ctl_handler *strategy;		/* Callback function for all r/w */
+	struct proc_dir_entry *de;	/* /proc control block */
+	void *extra1;
+	void *extra2;
+};
+
+/* struct ctl_table_header is used to maintain dynamic lists of
+   ctl_table trees. */
+struct ctl_table_header
+{
+	ctl_table *ctl_table;
+	struct list_head ctl_entry;
+};
+
+struct ctl_table_header * register_sysctl_table(ctl_table * table, 
+						int insert_at_head);
+void unregister_sysctl_table(struct ctl_table_header * table);
+
+#else /* __KERNEL__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
new file mode 100644
index 000000000000..635db1df656f
--- /dev/null
+++ b/include/linux/sysdev.h
@@ -0,0 +1,94 @@
+/**
+ * System devices follow a slightly different driver model. 
+ * They don't need to do dynammic driver binding, can't be probed, 
+ * and don't reside on any type of peripheral bus. 
+ * So, we represent and treat them a little differently.
+ * 
+ * We still have a notion of a driver for a system device, because we still
+ * want to perform basic operations on these devices. 
+ *
+ * We also support auxillary drivers binding to devices of a certain class.
+ * 
+ * This allows configurable drivers to register themselves for devices of
+ * a certain type. And, it allows class definitions to reside in generic
+ * code while arch-specific code can register specific drivers.
+ *
+ * Auxillary drivers registered with a NULL cls are registered as drivers
+ * for all system devices, and get notification calls for each device. 
+ */
+
+
+#ifndef _SYSDEV_H_
+#define _SYSDEV_H_
+
+#include <linux/kobject.h>
+
+
+struct sys_device;
+
+struct sysdev_class {
+	struct list_head	drivers;
+
+	/* Default operations for these types of devices */
+	int	(*shutdown)(struct sys_device *);
+	int	(*suspend)(struct sys_device *, u32 state);
+	int	(*resume)(struct sys_device *);
+	struct kset		kset;
+};
+
+
+extern int sysdev_class_register(struct sysdev_class *);
+extern void sysdev_class_unregister(struct sysdev_class *);
+
+
+/**
+ * Auxillary system device drivers.
+ */
+
+struct sysdev_driver {
+	struct list_head	entry;
+	int	(*add)(struct sys_device *);
+	int	(*remove)(struct sys_device *);
+	int	(*shutdown)(struct sys_device *);
+	int	(*suspend)(struct sys_device *, u32 state);
+	int	(*resume)(struct sys_device *);
+};
+
+
+extern int sysdev_driver_register(struct sysdev_class *, struct sysdev_driver *);
+extern void sysdev_driver_unregister(struct sysdev_class *, struct sysdev_driver *);
+
+
+/**
+ * sys_devices can be simplified a lot from regular devices, because they're
+ * simply not as versatile. 
+ */
+
+struct sys_device {
+	u32		id;
+	struct sysdev_class	* cls;
+	struct kobject		kobj;
+};
+
+extern int sysdev_register(struct sys_device *);
+extern void sysdev_unregister(struct sys_device *);
+
+
+struct sysdev_attribute { 
+	struct attribute	attr;
+	ssize_t (*show)(struct sys_device *, char *);
+	ssize_t (*store)(struct sys_device *, const char *, size_t);
+};
+
+
+#define SYSDEV_ATTR(_name,_mode,_show,_store) 		\
+struct sysdev_attribute attr_##_name = { 			\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,					\
+	.store	= _store,					\
+};
+
+extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
+extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
+
+#endif /* _SYSDEV_H_ */
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
new file mode 100644
index 000000000000..6f502ff7902a
--- /dev/null
+++ b/include/linux/sysfs.h
@@ -0,0 +1,182 @@
+/*
+ * sysfs.h - definitions for the device driver filesystem
+ *
+ * Copyright (c) 2001,2002 Patrick Mochel
+ * Copyright (c) 2004 Silicon Graphics, Inc.
+ *
+ * Please see Documentation/filesystems/sysfs.txt for more information.
+ */
+
+#ifndef _SYSFS_H_
+#define _SYSFS_H_
+
+#include <asm/atomic.h>
+
+struct kobject;
+struct module;
+
+struct attribute {
+	char			* name;
+	struct module 		* owner;
+	mode_t			mode;
+};
+
+struct attribute_group {
+	char			* name;
+	struct attribute	** attrs;
+};
+
+
+
+/**
+ * Use these macros to make defining attributes easier. See include/linux/device.h
+ * for examples..
+ */
+
+#define __ATTR(_name,_mode,_show,_store) { \
+	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE },	\
+	.show	= _show,					\
+	.store	= _store,					\
+}
+
+#define __ATTR_RO(_name) { \
+	.attr	= { .name = __stringify(_name), .mode = 0444, .owner = THIS_MODULE },	\
+	.show	= _name##_show,	\
+}
+
+#define __ATTR_NULL { .attr = { .name = NULL } }
+
+#define attr_name(_attr) (_attr).attr.name
+
+struct vm_area_struct;
+
+struct bin_attribute {
+	struct attribute	attr;
+	size_t			size;
+	void			*private;
+	ssize_t (*read)(struct kobject *, char *, loff_t, size_t);
+	ssize_t (*write)(struct kobject *, char *, loff_t, size_t);
+	int (*mmap)(struct kobject *, struct bin_attribute *attr,
+		    struct vm_area_struct *vma);
+};
+
+struct sysfs_ops {
+	ssize_t	(*show)(struct kobject *, struct attribute *,char *);
+	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
+};
+
+struct sysfs_dirent {
+	atomic_t		s_count;
+	struct list_head	s_sibling;
+	struct list_head	s_children;
+	void 			* s_element;
+	int			s_type;
+	umode_t			s_mode;
+	struct dentry		* s_dentry;
+};
+
+#define SYSFS_ROOT		0x0001
+#define SYSFS_DIR		0x0002
+#define SYSFS_KOBJ_ATTR 	0x0004
+#define SYSFS_KOBJ_BIN_ATTR	0x0008
+#define SYSFS_KOBJ_LINK 	0x0020
+#define SYSFS_NOT_PINNED	(SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR | SYSFS_KOBJ_LINK)
+
+#ifdef CONFIG_SYSFS
+
+extern int
+sysfs_create_dir(struct kobject *);
+
+extern void
+sysfs_remove_dir(struct kobject *);
+
+extern int
+sysfs_rename_dir(struct kobject *, const char *new_name);
+
+extern int
+sysfs_create_file(struct kobject *, const struct attribute *);
+
+extern int
+sysfs_update_file(struct kobject *, const struct attribute *);
+
+extern void
+sysfs_remove_file(struct kobject *, const struct attribute *);
+
+extern int 
+sysfs_create_link(struct kobject * kobj, struct kobject * target, char * name);
+
+extern void
+sysfs_remove_link(struct kobject *, char * name);
+
+int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr);
+int sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr);
+
+int sysfs_create_group(struct kobject *, const struct attribute_group *);
+void sysfs_remove_group(struct kobject *, const struct attribute_group *);
+
+#else /* CONFIG_SYSFS */
+
+static inline int sysfs_create_dir(struct kobject * k)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_dir(struct kobject * k)
+{
+	;
+}
+
+static inline int sysfs_rename_dir(struct kobject * k, const char *new_name)
+{
+	return 0;
+}
+
+static inline int sysfs_create_file(struct kobject * k, const struct attribute * a)
+{
+	return 0;
+}
+
+static inline int sysfs_update_file(struct kobject * k, const struct attribute * a)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_file(struct kobject * k, const struct attribute * a)
+{
+	;
+}
+
+static inline int sysfs_create_link(struct kobject * k, struct kobject * t, char * n)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_link(struct kobject * k, char * name)
+{
+	;
+}
+
+
+static inline int sysfs_create_bin_file(struct kobject * k, struct bin_attribute * a)
+{
+	return 0;
+}
+
+static inline int sysfs_remove_bin_file(struct kobject * k, struct bin_attribute * a)
+{
+	return 0;
+}
+
+static inline int sysfs_create_group(struct kobject * k, const struct attribute_group *g)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_group(struct kobject * k, const struct attribute_group * g)
+{
+	;
+}
+
+#endif /* CONFIG_SYSFS */
+
+#endif /* _SYSFS_H_ */
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
new file mode 100644
index 000000000000..ea819b89c235
--- /dev/null
+++ b/include/linux/sysrq.h
@@ -0,0 +1,60 @@
+/* -*- linux-c -*-
+ *
+ *	$Id: sysrq.h,v 1.3 1997/07/17 11:54:33 mj Exp $
+ *
+ *	Linux Magic System Request Key Hacks
+ *
+ *	(c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ *	(c) 2000 Crutcher Dunnavant <crutcher+kernel@datastacks.com>
+ *	overhauled to use key registration
+ *	based upon discusions in irc://irc.openprojects.net/#kernelnewbies
+ */
+
+#include <linux/config.h>
+
+struct pt_regs;
+struct tty_struct;
+
+/* Possible values of bitmask for enabling sysrq functions */
+/* 0x0001 is reserved for enable everything */
+#define SYSRQ_ENABLE_LOG	0x0002
+#define SYSRQ_ENABLE_KEYBOARD	0x0004
+#define SYSRQ_ENABLE_DUMP	0x0008
+#define SYSRQ_ENABLE_SYNC	0x0010
+#define SYSRQ_ENABLE_REMOUNT	0x0020
+#define SYSRQ_ENABLE_SIGNAL	0x0040
+#define SYSRQ_ENABLE_BOOT	0x0080
+#define SYSRQ_ENABLE_RTNICE	0x0100
+
+struct sysrq_key_op {
+	void (*handler)(int, struct pt_regs *, struct tty_struct *);
+	char *help_msg;
+	char *action_msg;
+	int enable_mask;
+};
+
+#ifdef CONFIG_MAGIC_SYSRQ
+
+/* Generic SysRq interface -- you may call it from any device driver, supplying
+ * ASCII code of the key, pointer to registers and kbd/tty structs (if they
+ * are available -- else NULL's).
+ */
+
+void handle_sysrq(int, struct pt_regs *, struct tty_struct *);
+void __handle_sysrq(int, struct pt_regs *, struct tty_struct *, int check_mask);
+int register_sysrq_key(int, struct sysrq_key_op *);
+int unregister_sysrq_key(int, struct sysrq_key_op *);
+struct sysrq_key_op *__sysrq_get_key_op(int key);
+
+#else
+
+static inline int __reterr(void)
+{
+	return -EINVAL;
+}
+
+#define register_sysrq_key(ig,nore) __reterr()
+#define unregister_sysrq_key(ig,nore) __reterr()
+
+#endif
diff --git a/include/linux/sysv_fs.h b/include/linux/sysv_fs.h
new file mode 100644
index 000000000000..e0248631e461
--- /dev/null
+++ b/include/linux/sysv_fs.h
@@ -0,0 +1,206 @@
+#ifndef _LINUX_SYSV_FS_H
+#define _LINUX_SYSV_FS_H
+
+#if defined(__GNUC__)
+# define __packed2__	__attribute__((packed, aligned(2)))
+#else
+>> I want to scream! <<
+#endif
+
+
+#ifndef __KERNEL__
+typedef u16 __fs16;
+typedef u32 __fs16;
+#endif
+
+/* inode numbers are 16 bit */
+typedef __fs16 sysv_ino_t;
+
+/* Block numbers are 24 bit, sometimes stored in 32 bit.
+   On Coherent FS, they are always stored in PDP-11 manner: the least
+   significant 16 bits come last. */
+typedef __fs32 sysv_zone_t;
+
+/* 0 is non-existent */
+#define SYSV_BADBL_INO	1	/* inode of bad blocks file */
+#define SYSV_ROOT_INO	2	/* inode of root directory */
+
+
+/* Xenix super-block data on disk */
+#define XENIX_NICINOD	100	/* number of inode cache entries */
+#define XENIX_NICFREE	100	/* number of free block list chunk entries */
+struct xenix_super_block {
+	__fs16		s_isize; /* index of first data zone */
+	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16		s_nfree;	/* number of free blocks in s_free, <= XENIX_NICFREE */
+	sysv_zone_t	s_free[XENIX_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16		s_ninode; /* number of free inodes in s_inode, <= XENIX_NICINOD */
+	sysv_ino_t	s_inode[XENIX_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char		s_flock;	/* lock during free block list manipulation */
+	char		s_ilock;	/* lock during inode cache manipulation */
+	char		s_fmod;		/* super-block modified flag */
+	char		s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32		s_time __packed2__; /* time of last super block update */
+	__fs32		s_tfree __packed2__; /* total number of free zones */
+	__fs16		s_tinode;	/* total number of free inodes */
+	__fs16		s_dinfo[4];	/* device information ?? */
+	char		s_fname[6];	/* file system volume name */
+	char		s_fpack[6];	/* file system pack name */
+	char		s_clean;	/* set to 0x46 when filesystem is properly unmounted */
+	char		s_fill[371];
+	s32		s_magic;	/* version of file system */
+	__fs32		s_type;		/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks
+								3 for 2048 byte blocks */
+								
+};
+
+/*
+ * SystemV FS comes in two variants:
+ * sysv2: System V Release 2 (e.g. Microport), structure elements aligned(2).
+ * sysv4: System V Release 4 (e.g. Consensys), structure elements aligned(4).
+ */
+#define SYSV_NICINOD	100	/* number of inode cache entries */
+#define SYSV_NICFREE	50	/* number of free block list chunk entries */
+
+/* SystemV4 super-block data on disk */
+struct sysv4_super_block {
+	__fs16	s_isize;	/* index of first data zone */
+	u16	s_pad0;
+	__fs32	s_fsize;	/* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16	s_nfree;	/* number of free blocks in s_free, <= SYSV_NICFREE */
+	u16	s_pad1;
+	sysv_zone_t	s_free[SYSV_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16	s_ninode;	/* number of free inodes in s_inode, <= SYSV_NICINOD */
+	u16	s_pad2;
+	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char	s_flock;	/* lock during free block list manipulation */
+	char	s_ilock;	/* lock during inode cache manipulation */
+	char	s_fmod;		/* super-block modified flag */
+	char	s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32	s_time;		/* time of last super block update */
+	__fs16	s_dinfo[4];	/* device information ?? */
+	__fs32	s_tfree;	/* total number of free zones */
+	__fs16	s_tinode;	/* total number of free inodes */
+	u16	s_pad3;
+	char	s_fname[6];	/* file system volume name */
+	char	s_fpack[6];	/* file system pack name */
+	s32	s_fill[12];
+	__fs32	s_state;	/* file system state: 0x7c269d38-s_time means clean */
+	s32	s_magic;	/* version of file system */
+	__fs32	s_type;		/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks */
+};
+
+/* SystemV2 super-block data on disk */
+struct sysv2_super_block {
+	__fs16	s_isize; 		/* index of first data zone */
+	__fs32	s_fsize __packed2__;	/* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16	s_nfree;		/* number of free blocks in s_free, <= SYSV_NICFREE */
+	sysv_zone_t s_free[SYSV_NICFREE];	/* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16	s_ninode;		/* number of free inodes in s_inode, <= SYSV_NICINOD */
+	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char	s_flock;		/* lock during free block list manipulation */
+	char	s_ilock;		/* lock during inode cache manipulation */
+	char	s_fmod;			/* super-block modified flag */
+	char	s_ronly;		/* flag whether fs is mounted read-only */
+	__fs32	s_time __packed2__;	/* time of last super block update */
+	__fs16	s_dinfo[4];		/* device information ?? */
+	__fs32	s_tfree __packed2__;	/* total number of free zones */
+	__fs16	s_tinode;		/* total number of free inodes */
+	char	s_fname[6];		/* file system volume name */
+	char	s_fpack[6];		/* file system pack name */
+	s32	s_fill[14];
+	__fs32	s_state;		/* file system state: 0xcb096f43 means clean */
+	s32	s_magic;		/* version of file system */
+	__fs32	s_type;			/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks */
+};
+
+/* V7 super-block data on disk */
+#define V7_NICINOD     100     /* number of inode cache entries */
+#define V7_NICFREE     50      /* number of free block list chunk entries */
+struct v7_super_block {
+	__fs16 s_isize;        /* index of first data zone */
+	__fs32 s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16 s_nfree;        /* number of free blocks in s_free, <= V7_NICFREE */
+	sysv_zone_t s_free[V7_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16 s_ninode;       /* number of free inodes in s_inode, <= V7_NICINOD */
+	sysv_ino_t      s_inode[V7_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux or V7: */
+	char    s_flock;        /* lock during free block list manipulation */
+	char    s_ilock;        /* lock during inode cache manipulation */
+	char    s_fmod;         /* super-block modified flag */
+	char    s_ronly;        /* flag whether fs is mounted read-only */
+	__fs32  s_time __packed2__; /* time of last super block update */
+	/* the following fields are not maintained by V7: */
+	__fs32  s_tfree __packed2__; /* total number of free zones */
+	__fs16  s_tinode;       /* total number of free inodes */
+	__fs16  s_m;            /* interleave factor */
+	__fs16  s_n;            /* interleave factor */
+	char    s_fname[6];     /* file system name */
+	char    s_fpack[6];     /* file system pack name */
+};
+
+/* Coherent super-block data on disk */
+#define COH_NICINOD	100	/* number of inode cache entries */
+#define COH_NICFREE	64	/* number of free block list chunk entries */
+struct coh_super_block {
+	__fs16		s_isize;	/* index of first data zone */
+	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16 s_nfree;	/* number of free blocks in s_free, <= COH_NICFREE */
+	sysv_zone_t	s_free[COH_NICFREE] __packed2__; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16		s_ninode;	/* number of free inodes in s_inode, <= COH_NICINOD */
+	sysv_ino_t	s_inode[COH_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char		s_flock;	/* lock during free block list manipulation */
+	char		s_ilock;	/* lock during inode cache manipulation */
+	char		s_fmod;		/* super-block modified flag */
+	char		s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32		s_time __packed2__; /* time of last super block update */
+	__fs32		s_tfree __packed2__; /* total number of free zones */
+	__fs16		s_tinode;	/* total number of free inodes */
+	__fs16		s_interleave_m;	/* interleave factor */
+	__fs16		s_interleave_n;
+	char		s_fname[6];	/* file system volume name */
+	char		s_fpack[6];	/* file system pack name */
+	__fs32		s_unique;	/* zero, not used */
+};
+
+/* SystemV/Coherent inode data on disk */
+struct sysv_inode {
+	__fs16 i_mode;
+	__fs16 i_nlink;
+	__fs16 i_uid;
+	__fs16 i_gid;
+	__fs32 i_size;
+	u8  i_data[3*(10+1+1+1)];
+	u8  i_gen;
+	__fs32 i_atime;	/* time of last access */
+	__fs32 i_mtime;	/* time of last modification */
+	__fs32 i_ctime;	/* time of creation */
+};
+
+/* SystemV/Coherent directory entry on disk */
+#define SYSV_NAMELEN	14	/* max size of name in struct sysv_dir_entry */
+struct sysv_dir_entry {
+	sysv_ino_t inode;
+	char name[SYSV_NAMELEN]; /* up to 14 characters, the rest are zeroes */
+};
+
+#define SYSV_DIRSIZE	sizeof(struct sysv_dir_entry)	/* size of every directory entry */
+
+#endif /* _LINUX_SYSV_FS_H */
diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h
new file mode 100644
index 000000000000..23a03eb630db
--- /dev/null
+++ b/include/linux/tc_act/tc_gact.h
@@ -0,0 +1,34 @@
+#ifndef __LINUX_TC_GACT_H
+#define __LINUX_TC_GACT_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_GACT 5
+struct tc_gact
+{
+	tc_gen;
+
+};
+
+struct tc_gact_p
+{
+#define PGACT_NONE              0
+#define PGACT_NETRAND           1
+#define PGACT_DETERM            2
+#define MAX_RAND                (PGACT_DETERM + 1 )
+	__u16                 ptype;
+	__u16                 pval;
+	int                   paction;
+};
+ 
+enum
+{
+	TCA_GACT_UNSPEC,
+	TCA_GACT_TM,
+	TCA_GACT_PARMS,
+	TCA_GACT_PROB,
+	__TCA_GACT_MAX
+};
+#define TCA_GACT_MAX (__TCA_GACT_MAX - 1)
+ 
+#endif
diff --git a/include/linux/tc_act/tc_ipt.h b/include/linux/tc_act/tc_ipt.h
new file mode 100644
index 000000000000..4b6f7b6c7a79
--- /dev/null
+++ b/include/linux/tc_act/tc_ipt.h
@@ -0,0 +1,21 @@
+#ifndef __LINUX_TC_IPT_H
+#define __LINUX_TC_IPT_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_IPT 6
+
+enum
+{
+	TCA_IPT_UNSPEC,
+	TCA_IPT_TABLE,
+	TCA_IPT_HOOK,
+	TCA_IPT_INDEX,
+	TCA_IPT_CNT,
+	TCA_IPT_TM,
+	TCA_IPT_TARG,
+	__TCA_IPT_MAX
+};
+#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
+                                                                                
+#endif
diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h
new file mode 100644
index 000000000000..71d63409d568
--- /dev/null
+++ b/include/linux/tc_act/tc_mirred.h
@@ -0,0 +1,28 @@
+#ifndef __LINUX_TC_MIR_H
+#define __LINUX_TC_MIR_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_MIRRED 8
+#define TCA_EGRESS_REDIR 1  /* packet redirect to EGRESS*/
+#define TCA_EGRESS_MIRROR 2 /* mirror packet to EGRESS */
+#define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
+#define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
+                                                                                
+struct tc_mirred
+{
+	tc_gen;
+	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
+	__u32                   ifindex;  /* ifindex of egress port */
+};
+                                                                                
+enum
+{
+	TCA_MIRRED_UNSPEC,
+	TCA_MIRRED_TM,
+	TCA_MIRRED_PARMS,
+	__TCA_MIRRED_MAX
+};
+#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)
+                                                                                
+#endif
diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h
new file mode 100644
index 000000000000..83e56e32e8e0
--- /dev/null
+++ b/include/linux/tc_act/tc_pedit.h
@@ -0,0 +1,36 @@
+#ifndef __LINUX_TC_PED_H
+#define __LINUX_TC_PED_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_PEDIT 7
+
+enum
+{
+	TCA_PEDIT_UNSPEC,
+	TCA_PEDIT_TM,
+	TCA_PEDIT_PARMS,
+	__TCA_PEDIT_MAX
+};
+#define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
+                                                                                
+struct tc_pedit_key
+{
+	__u32           mask;  /* AND */
+	__u32           val;   /*XOR */
+	__u32           off;  /*offset */
+	__u32           at;
+	__u32           offmask;
+	__u32           shift;
+};
+                                                                                
+struct tc_pedit_sel
+{
+	tc_gen;
+	unsigned char           nkeys;
+	unsigned char           flags;
+	struct tc_pedit_key     keys[0];
+};
+#define tc_pedit tc_pedit_sel
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h
new file mode 100644
index 000000000000..c7f4d43618fd
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_cmp.h
@@ -0,0 +1,26 @@
+#ifndef __LINUX_TC_EM_CMP_H
+#define __LINUX_TC_EM_CMP_H
+
+#include <linux/pkt_cls.h>
+
+struct tcf_em_cmp
+{
+	__u32		val;
+	__u32		mask;
+	__u16		off;
+	__u8		align:4;
+	__u8		flags:4;
+	__u8		layer:4;
+	__u8		opnd:4;
+};
+
+enum
+{
+	TCF_EM_ALIGN_U8  = 1,
+	TCF_EM_ALIGN_U16 = 2,
+	TCF_EM_ALIGN_U32 = 4
+};
+
+#define TCF_EM_CMP_TRANS	1
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
new file mode 100644
index 000000000000..aa6b48bb4dcd
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -0,0 +1,69 @@
+#ifndef __LINUX_TC_EM_META_H
+#define __LINUX_TC_EM_META_H
+
+#include <linux/pkt_cls.h>
+
+enum
+{
+	TCA_EM_META_UNSPEC,
+	TCA_EM_META_HDR,
+	TCA_EM_META_LVALUE,
+	TCA_EM_META_RVALUE,
+	__TCA_EM_META_MAX
+};
+#define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1)
+
+struct tcf_meta_val
+{
+	__u16			kind;
+	__u8			shift;
+	__u8			op;
+};
+
+#define TCF_META_TYPE_MASK	(0xf << 12)
+#define TCF_META_TYPE(kind)	(((kind) & TCF_META_TYPE_MASK) >> 12)
+#define TCF_META_ID_MASK	0x7ff
+#define TCF_META_ID(kind)	((kind) & TCF_META_ID_MASK)
+
+enum
+{
+	TCF_META_TYPE_VAR,
+	TCF_META_TYPE_INT,
+	__TCF_META_TYPE_MAX
+};
+#define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1)
+
+enum
+{
+	TCF_META_ID_VALUE,
+	TCF_META_ID_RANDOM,
+	TCF_META_ID_LOADAVG_0,
+	TCF_META_ID_LOADAVG_1,
+	TCF_META_ID_LOADAVG_2,
+	TCF_META_ID_DEV,
+	TCF_META_ID_INDEV,
+	TCF_META_ID_REALDEV,
+	TCF_META_ID_PRIORITY,
+	TCF_META_ID_PROTOCOL,
+	TCF_META_ID_SECURITY,
+	TCF_META_ID_PKTTYPE,
+	TCF_META_ID_PKTLEN,
+	TCF_META_ID_DATALEN,
+	TCF_META_ID_MACLEN,
+	TCF_META_ID_NFMARK,
+	TCF_META_ID_TCINDEX,
+	TCF_META_ID_TCVERDICT,
+	TCF_META_ID_TCCLASSID,
+	TCF_META_ID_RTCLASSID,
+	TCF_META_ID_RTIIF,
+	__TCF_META_ID_MAX
+};
+#define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
+
+struct tcf_meta_hdr
+{
+	struct tcf_meta_val	left;
+	struct tcf_meta_val	right;
+};
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h
new file mode 100644
index 000000000000..f19d1f58ec9d
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_nbyte.h
@@ -0,0 +1,13 @@
+#ifndef __LINUX_TC_EM_NBYTE_H
+#define __LINUX_TC_EM_NBYTE_H
+
+#include <linux/pkt_cls.h>
+
+struct tcf_em_nbyte
+{
+	__u16		off;
+	__u16		len:12;
+	__u8		layer:4;
+};
+
+#endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
new file mode 100644
index 000000000000..14a55e3e3a50
--- /dev/null
+++ b/include/linux/tcp.h
@@ -0,0 +1,448 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol.
+ *
+ * Version:	@(#)tcp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_TCP_H
+#define _LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct tcphdr {
+	__u16	source;
+	__u16	dest;
+	__u32	seq;
+	__u32	ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	res1:4,
+		doff:4,
+		fin:1,
+		syn:1,
+		rst:1,
+		psh:1,
+		ack:1,
+		urg:1,
+		ece:1,
+		cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	doff:4,
+		res1:4,
+		cwr:1,
+		ece:1,
+		urg:1,
+		ack:1,
+		psh:1,
+		rst:1,
+		syn:1,
+		fin:1;
+#else
+#error	"Adjust your <asm/byteorder.h> defines"
+#endif	
+	__u16	window;
+	__u16	check;
+	__u16	urg_ptr;
+};
+
+
+enum {
+  TCP_ESTABLISHED = 1,
+  TCP_SYN_SENT,
+  TCP_SYN_RECV,
+  TCP_FIN_WAIT1,
+  TCP_FIN_WAIT2,
+  TCP_TIME_WAIT,
+  TCP_CLOSE,
+  TCP_CLOSE_WAIT,
+  TCP_LAST_ACK,
+  TCP_LISTEN,
+  TCP_CLOSING,	 /* now a valid state */
+
+  TCP_MAX_STATES /* Leave at the end! */
+};
+
+#define TCP_STATE_MASK	0xF
+#define TCP_ACTION_FIN	(1 << 7)
+
+enum {
+  TCPF_ESTABLISHED = (1 << 1),
+  TCPF_SYN_SENT  = (1 << 2),
+  TCPF_SYN_RECV  = (1 << 3),
+  TCPF_FIN_WAIT1 = (1 << 4),
+  TCPF_FIN_WAIT2 = (1 << 5),
+  TCPF_TIME_WAIT = (1 << 6),
+  TCPF_CLOSE     = (1 << 7),
+  TCPF_CLOSE_WAIT = (1 << 8),
+  TCPF_LAST_ACK  = (1 << 9),
+  TCPF_LISTEN    = (1 << 10),
+  TCPF_CLOSING   = (1 << 11) 
+};
+
+/*
+ *	The union cast uses a gcc extension to avoid aliasing problems
+ *  (union is compatible to any of its members)
+ *  This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr { 
+	struct tcphdr hdr;
+	__u32 		  words[5];
+}; 
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+
+enum { 
+	TCP_FLAG_CWR = __constant_htonl(0x00800000), 
+	TCP_FLAG_ECE = __constant_htonl(0x00400000), 
+	TCP_FLAG_URG = __constant_htonl(0x00200000), 
+	TCP_FLAG_ACK = __constant_htonl(0x00100000), 
+	TCP_FLAG_PSH = __constant_htonl(0x00080000), 
+	TCP_FLAG_RST = __constant_htonl(0x00040000), 
+	TCP_FLAG_SYN = __constant_htonl(0x00020000), 
+	TCP_FLAG_FIN = __constant_htonl(0x00010000),
+	TCP_RESERVED_BITS = __constant_htonl(0x0F000000),
+	TCP_DATA_OFFSET = __constant_htonl(0xF0000000)
+}; 
+
+/* TCP socket options */
+#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG		2	/* Limit MSS */
+#define TCP_CORK		3	/* Never send partially complete segments */
+#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
+#define TCP_KEEPINTVL		5	/* Interval between keepalives */
+#define TCP_KEEPCNT		6	/* Number of keepalives before death */
+#define TCP_SYNCNT		7	/* Number of SYN retransmits */
+#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
+#define TCP_INFO		11	/* Information about this connection. */
+#define TCP_QUICKACK		12	/* Block/reenable quick acks */
+
+#define TCPI_OPT_TIMESTAMPS	1
+#define TCPI_OPT_SACK		2
+#define TCPI_OPT_WSCALE		4
+#define TCPI_OPT_ECN		8
+
+enum tcp_ca_state
+{
+	TCP_CA_Open = 0,
+#define TCPF_CA_Open	(1<<TCP_CA_Open)
+	TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+	TCP_CA_CWR = 2,
+#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
+	TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+	TCP_CA_Loss = 4
+#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
+};
+
+struct tcp_info
+{
+	__u8	tcpi_state;
+	__u8	tcpi_ca_state;
+	__u8	tcpi_retransmits;
+	__u8	tcpi_probes;
+	__u8	tcpi_backoff;
+	__u8	tcpi_options;
+	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+	__u32	tcpi_rto;
+	__u32	tcpi_ato;
+	__u32	tcpi_snd_mss;
+	__u32	tcpi_rcv_mss;
+
+	__u32	tcpi_unacked;
+	__u32	tcpi_sacked;
+	__u32	tcpi_lost;
+	__u32	tcpi_retrans;
+	__u32	tcpi_fackets;
+
+	/* Times. */
+	__u32	tcpi_last_data_sent;
+	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
+	__u32	tcpi_last_data_recv;
+	__u32	tcpi_last_ack_recv;
+
+	/* Metrics. */
+	__u32	tcpi_pmtu;
+	__u32	tcpi_rcv_ssthresh;
+	__u32	tcpi_rtt;
+	__u32	tcpi_rttvar;
+	__u32	tcpi_snd_ssthresh;
+	__u32	tcpi_snd_cwnd;
+	__u32	tcpi_advmss;
+	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
+
+	__u32	tcpi_total_retrans;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+#include <linux/ip.h>
+#include <net/sock.h>
+
+/* This defines a selective acknowledgement block. */
+struct tcp_sack_block {
+	__u32	start_seq;
+	__u32	end_seq;
+};
+
+enum tcp_congestion_algo {
+	TCP_RENO=0,
+	TCP_VEGAS,
+	TCP_WESTWOOD,
+	TCP_BIC,
+};
+
+struct tcp_options_received {
+/*	PAWS/RTTM data	*/
+	long	ts_recent_stamp;/* Time we stored ts_recent (for aging) */
+	__u32	ts_recent;	/* Time stamp to echo next		*/
+	__u32	rcv_tsval;	/* Time stamp value             	*/
+	__u32	rcv_tsecr;	/* Time stamp echo reply        	*/
+	__u16 	saw_tstamp : 1,	/* Saw TIMESTAMP on last packet		*/
+		tstamp_ok : 1,	/* TIMESTAMP seen on SYN packet		*/
+		dsack : 1,	/* D-SACK is scheduled			*/
+		wscale_ok : 1,	/* Wscale seen on SYN packet		*/
+		sack_ok : 4,	/* SACK seen on SYN packet		*/
+		snd_wscale : 4,	/* Window scaling received from sender	*/
+		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
+/*	SACKs data	*/
+	__u8	eff_sacks;	/* Size of SACK array to send with next packet */
+	__u8	num_sacks;	/* Number of SACK blocks		*/
+	__u16	user_mss;  	/* mss requested by user in ioctl */
+	__u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
+};
+
+struct tcp_sock {
+	/* inet_sock has to be the first member of tcp_sock */
+	struct inet_sock	inet;
+	int	tcp_header_len;	/* Bytes of tcp header to send		*/
+
+/*
+ *	Header prediction flags
+ *	0x5?10 << 16 + snd_wnd in net byte order
+ */
+	__u32	pred_flags;
+
+/*
+ *	RFC793 variables by their proper names. This means you can
+ *	read the code and the spec side by side (and laugh ...)
+ *	See RFC793 and RFC1122. The RFC writes these in capitals.
+ */
+ 	__u32	rcv_nxt;	/* What we want to receive next 	*/
+ 	__u32	snd_nxt;	/* Next sequence we send		*/
+
+ 	__u32	snd_una;	/* First byte we want an ack for	*/
+ 	__u32	snd_sml;	/* Last byte of the most recently transmitted small packet */
+	__u32	rcv_tstamp;	/* timestamp of last received ACK (for keepalives) */
+	__u32	lsndtime;	/* timestamp of last sent data packet (for restart window) */
+	struct tcp_bind_bucket *bind_hash;
+	/* Delayed ACK control data */
+	struct {
+		__u8	pending;	/* ACK is pending */
+		__u8	quick;		/* Scheduled number of quick acks	*/
+		__u8	pingpong;	/* The session is interactive		*/
+		__u8	blocked;	/* Delayed ACK was blocked by socket lock*/
+		__u32	ato;		/* Predicted tick of soft clock		*/
+		unsigned long timeout;	/* Currently scheduled timeout		*/
+		__u32	lrcvtime;	/* timestamp of last received data packet*/
+		__u16	last_seg_size;	/* Size of last incoming segment	*/
+		__u16	rcv_mss;	/* MSS used for delayed ACK decisions	*/ 
+	} ack;
+
+	/* Data for direct copy to user */
+	struct {
+		struct sk_buff_head	prequeue;
+		struct task_struct	*task;
+		struct iovec		*iov;
+		int			memory;
+		int			len;
+	} ucopy;
+
+	__u32	snd_wl1;	/* Sequence for window update		*/
+	__u32	snd_wnd;	/* The window we expect to receive	*/
+	__u32	max_window;	/* Maximal window ever seen from peer	*/
+	__u32	pmtu_cookie;	/* Last pmtu seen by socket		*/
+	__u32	mss_cache;	/* Cached effective mss, not including SACKS */
+	__u16	mss_cache_std;	/* Like mss_cache, but without TSO */
+	__u16	ext_header_len;	/* Network protocol overhead (IP/IPv6 options) */
+	__u8	ca_state;	/* State of fast-retransmit machine 	*/
+	__u8	retransmits;	/* Number of unrecovered RTO timeouts.	*/
+
+	__u16	advmss;		/* Advertised MSS			*/
+	__u32	window_clamp;	/* Maximal window to advertise		*/
+	__u32	rcv_ssthresh;	/* Current window clamp			*/
+
+	__u32	frto_highmark;	/* snd_nxt when RTO occurred */
+	__u8	reordering;	/* Packet reordering metric.		*/
+	__u8	frto_counter;	/* Number of new acks after RTO */
+
+	__u8	adv_cong;	/* Using Vegas, Westwood, or BIC */
+	__u8	defer_accept;	/* User waits for some data after accept() */
+
+/* RTT measurement */
+	__u32	srtt;		/* smoothed round trip time << 3	*/
+	__u32	mdev;		/* medium deviation			*/
+	__u32	mdev_max;	/* maximal mdev for the last rtt period	*/
+	__u32	rttvar;		/* smoothed mdev_max			*/
+	__u32	rtt_seq;	/* sequence number to update rttvar	*/
+	__u32	rto;		/* retransmit timeout			*/
+
+	__u32	packets_out;	/* Packets which are "in flight"	*/
+	__u32	left_out;	/* Packets which leaved network	*/
+	__u32	retrans_out;	/* Retransmitted packets out		*/
+	__u8	backoff;	/* backoff				*/
+/*
+ *      Options received (usually on last packet, some only on SYN packets).
+ */
+	__u8	nonagle;	/* Disable Nagle algorithm?             */
+	__u8	keepalive_probes; /* num of allowed keep alive probes	*/
+
+	__u8	probes_out;	/* unanswered 0 window probes		*/
+	struct tcp_options_received rx_opt;
+
+/*
+ *	Slow start and congestion control (see also Nagle, and Karn & Partridge)
+ */
+ 	__u32	snd_ssthresh;	/* Slow start size threshold		*/
+ 	__u32	snd_cwnd;	/* Sending congestion window		*/
+ 	__u16	snd_cwnd_cnt;	/* Linear increase counter		*/
+	__u16	snd_cwnd_clamp; /* Do not allow snd_cwnd to grow above this */
+	__u32	snd_cwnd_used;
+	__u32	snd_cwnd_stamp;
+
+	/* Two commonly used timers in both sender and receiver paths. */
+	unsigned long		timeout;
+ 	struct timer_list	retransmit_timer;	/* Resend (no ack)	*/
+ 	struct timer_list	delack_timer;		/* Ack delay 		*/
+
+	struct sk_buff_head	out_of_order_queue; /* Out of order segments go here */
+
+	struct tcp_func		*af_specific;	/* Operations which are AF_INET{4,6} specific	*/
+
+ 	__u32	rcv_wnd;	/* Current receiver window		*/
+	__u32	rcv_wup;	/* rcv_nxt on last window update sent	*/
+	__u32	write_seq;	/* Tail(+1) of data held in tcp send buffer */
+	__u32	pushed_seq;	/* Last pushed seq, required to talk to windows */
+	__u32	copied_seq;	/* Head of yet unread data		*/
+
+/*	SACKs data	*/
+	struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
+	struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
+
+	__u8	syn_retries;	/* num of allowed syn retries */
+	__u8	ecn_flags;	/* ECN status bits.			*/
+	__u16	prior_ssthresh; /* ssthresh saved at recovery start	*/
+	__u32	lost_out;	/* Lost packets			*/
+	__u32	sacked_out;	/* SACK'd packets			*/
+	__u32	fackets_out;	/* FACK'd packets			*/
+	__u32	high_seq;	/* snd_nxt at onset of congestion	*/
+
+	__u32	retrans_stamp;	/* Timestamp of the last retransmit,
+				 * also used in SYN-SENT to remember stamp of
+				 * the first SYN. */
+	__u32	undo_marker;	/* tracking retrans started here. */
+	int	undo_retrans;	/* number of undoable retransmissions. */
+	__u32	urg_seq;	/* Seq of received urgent pointer */
+	__u16	urg_data;	/* Saved octet of OOB data and control flags */
+	__u8	pending;	/* Scheduled timer event	*/
+	__u8	urg_mode;	/* In urgent mode		*/
+	__u32	snd_up;		/* Urgent pointer		*/
+
+	__u32	total_retrans;	/* Total retransmits for entire connection */
+
+	/* The syn_wait_lock is necessary only to avoid proc interface having
+	 * to grab the main lock sock while browsing the listening hash
+	 * (otherwise it's deadlock prone).
+	 * This lock is acquired in read mode only from listening_get_next()
+	 * and it's acquired in write mode _only_ from code that is actively
+	 * changing the syn_wait_queue. All readers that are holding
+	 * the master sock lock don't need to grab this lock in read mode
+	 * too as the syn_wait_queue writes are always protected from
+	 * the main sock lock.
+	 */
+	rwlock_t		syn_wait_lock;
+	struct tcp_listen_opt	*listen_opt;
+
+	/* FIFO of established children */
+	struct open_request	*accept_queue;
+	struct open_request	*accept_queue_tail;
+
+	unsigned int		keepalive_time;	  /* time before keep alive takes place */
+	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
+	int			linger2;
+
+	unsigned long last_synq_overflow; 
+
+/* Receiver side RTT estimation */
+	struct {
+		__u32	rtt;
+		__u32	seq;
+		__u32	time;
+	} rcv_rtt_est;
+
+/* Receiver queue space */
+	struct {
+		int	space;
+		__u32	seq;
+		__u32	time;
+	} rcvq_space;
+
+/* TCP Westwood structure */
+        struct {
+                __u32    bw_ns_est;        /* first bandwidth estimation..not too smoothed 8) */
+                __u32    bw_est;           /* bandwidth estimate */
+                __u32    rtt_win_sx;       /* here starts a new evaluation... */
+                __u32    bk;
+                __u32    snd_una;          /* used for evaluating the number of acked bytes */
+                __u32    cumul_ack;
+                __u32    accounted;
+                __u32    rtt;
+                __u32    rtt_min;          /* minimum observed RTT */
+        } westwood;
+
+/* Vegas variables */
+	struct {
+		__u32	beg_snd_nxt;	/* right edge during last RTT */
+		__u32	beg_snd_una;	/* left edge  during last RTT */
+		__u32	beg_snd_cwnd;	/* saves the size of the cwnd */
+		__u8	doing_vegas_now;/* if true, do vegas for this RTT */
+		__u16	cntRTT;		/* # of RTTs measured within last RTT */
+		__u32	minRTT;		/* min of RTTs measured within last RTT (in usec) */
+		__u32	baseRTT;	/* the min of all Vegas RTT measurements seen (in usec) */
+	} vegas;
+
+	/* BI TCP Parameters */
+	struct {
+		__u32	cnt;		/* increase cwnd by 1 after this number of ACKs */
+		__u32 	last_max_cwnd;	/* last maximium snd_cwnd */
+		__u32	last_cwnd;	/* the last snd_cwnd */
+		__u32   last_stamp;     /* time when updated last_cwnd */
+	} bictcp;
+};
+
+static inline struct tcp_sock *tcp_sk(const struct sock *sk)
+{
+	return (struct tcp_sock *)sk;
+}
+
+#endif
+
+#endif	/* _LINUX_TCP_H */
diff --git a/include/linux/tcp_diag.h b/include/linux/tcp_diag.h
new file mode 100644
index 000000000000..ceee962e1d15
--- /dev/null
+++ b/include/linux/tcp_diag.h
@@ -0,0 +1,127 @@
+#ifndef _TCP_DIAG_H_
+#define _TCP_DIAG_H_ 1
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+
+/* Socket identity */
+struct tcpdiag_sockid
+{
+	__u16	tcpdiag_sport;
+	__u16	tcpdiag_dport;
+	__u32	tcpdiag_src[4];
+	__u32	tcpdiag_dst[4];
+	__u32	tcpdiag_if;
+	__u32	tcpdiag_cookie[2];
+#define TCPDIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct tcpdiagreq
+{
+	__u8	tcpdiag_family;		/* Family of addresses. */
+	__u8	tcpdiag_src_len;
+	__u8	tcpdiag_dst_len;
+	__u8	tcpdiag_ext;		/* Query extended information */
+
+	struct tcpdiag_sockid id;
+
+	__u32	tcpdiag_states;		/* States to dump */
+	__u32	tcpdiag_dbs;		/* Tables to dump (NI) */
+};
+
+enum
+{
+	TCPDIAG_REQ_NONE,
+	TCPDIAG_REQ_BYTECODE,
+};
+
+#define TCPDIAG_REQ_MAX TCPDIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+ 
+struct tcpdiag_bc_op
+{
+	unsigned char	code;
+	unsigned char	yes;
+	unsigned short	no;
+};
+
+enum
+{
+	TCPDIAG_BC_NOP,
+	TCPDIAG_BC_JMP,
+	TCPDIAG_BC_S_GE,
+	TCPDIAG_BC_S_LE,
+	TCPDIAG_BC_D_GE,
+	TCPDIAG_BC_D_LE,
+	TCPDIAG_BC_AUTO,
+	TCPDIAG_BC_S_COND,
+	TCPDIAG_BC_D_COND,
+};
+
+struct tcpdiag_hostcond
+{
+	__u8	family;
+	__u8	prefix_len;
+	int	port;
+	__u32	addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct tcpdiagmsg
+{
+	__u8	tcpdiag_family;
+	__u8	tcpdiag_state;
+	__u8	tcpdiag_timer;
+	__u8	tcpdiag_retrans;
+
+	struct tcpdiag_sockid id;
+
+	__u32	tcpdiag_expires;
+	__u32	tcpdiag_rqueue;
+	__u32	tcpdiag_wqueue;
+	__u32	tcpdiag_uid;
+	__u32	tcpdiag_inode;
+};
+
+/* Extensions */
+
+enum
+{
+	TCPDIAG_NONE,
+	TCPDIAG_MEMINFO,
+	TCPDIAG_INFO,
+	TCPDIAG_VEGASINFO,
+};
+
+#define TCPDIAG_MAX TCPDIAG_VEGASINFO
+
+
+/* TCPDIAG_MEM */
+
+struct tcpdiag_meminfo
+{
+	__u32	tcpdiag_rmem;
+	__u32	tcpdiag_wmem;
+	__u32	tcpdiag_fmem;
+	__u32	tcpdiag_tmem;
+};
+
+/* TCPDIAG_VEGASINFO */
+
+struct tcpvegas_info {
+	__u32	tcpv_enabled;
+	__u32	tcpv_rttcnt;
+	__u32	tcpv_rtt;
+	__u32	tcpv_minrtt;
+};
+
+
+#endif /* _TCP_DIAG_H_ */
diff --git a/include/linux/telephony.h b/include/linux/telephony.h
new file mode 100644
index 000000000000..0d0cf2a1e7bc
--- /dev/null
+++ b/include/linux/telephony.h
@@ -0,0 +1,266 @@
+/******************************************************************************
+ *
+ *		telephony.h
+ *
+ *		Basic Linux Telephony Interface
+ *
+ *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *    Authors:       Ed Okerson, <eokerson@quicknet.net>
+ *                   Greg Herlein, <gherlein@quicknet.net>
+ *
+ *    Contributors:  Alan Cox, <alan@redhat.com>
+ *                   David W. Erhart, <derhart@quicknet.net>
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ * Version:       $Revision: 4.2 $
+ *
+ * $Id: telephony.h,v 4.2 2001/08/06 07:09:43 craigs Exp $
+ *
+ *****************************************************************************/
+
+#ifndef TELEPHONY_H
+#define TELEPHONY_H
+
+#define TELEPHONY_VERSION 3013
+
+#define PHONE_VENDOR_IXJ          1
+#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
+#define PHONE_VENDOR_VOICETRONIX  2
+#define PHONE_VENDOR_ACULAB       3
+#define PHONE_VENDOR_DIGI         4
+#define PHONE_VENDOR_FRANKLIN     5
+
+/******************************************************************************
+ *  Vendor Summary Information Area
+ *
+ *  Quicknet Technologies, Inc. - makes low density analog telephony cards
+ *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
+ *
+ *  (other vendors following this API shuld add a short description of
+ *  the telephony products they support under Linux)
+ *
+ *****************************************************************************/
+#define QTI_PHONEJACK		100
+#define QTI_LINEJACK		300
+#define QTI_PHONEJACK_LITE	400
+#define QTI_PHONEJACK_PCI	500
+#define QTI_PHONECARD		600
+
+/******************************************************************************
+*
+* The capabilities ioctls can inform you of the capabilities of each phone
+* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
+* returns an integer value indicating the number of capabilities the   
+* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
+* capability structs with all of its capabilities.  The
+* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
+* a TRUE if the device has that capability, otherwise it returns false.
+* 
+******************************************************************************/
+typedef enum {
+	vendor = 0,
+	device,
+	port,
+	codec,
+	dsp
+} phone_cap;
+
+struct phone_capability {
+	char desc[80];
+	phone_cap captype;
+	int cap;
+	int handle;
+};
+
+typedef enum {
+	pots = 0,
+	pstn,
+	handset,
+	speaker
+} phone_ports;
+
+#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
+#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
+#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
+
+typedef struct {
+        char month[3];
+        char day[3];
+        char hour[3];
+        char min[3];
+        int numlen;
+        char number[11];
+        int namelen;
+        char name[80];
+} PHONE_CID;
+ 
+#define PHONE_RING			_IO  ('q', 0x83)
+#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
+#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
+#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
+#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
+#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
+#define PHONE_RING_STOP			_IO  ('q', 0x88)
+
+#define USA_RING_CADENCE	 0xC0C0
+
+#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
+#define PHONE_REC_START			_IO  ('q', 0x8A)
+#define PHONE_REC_STOP			_IO  ('q', 0x8B)
+#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
+#define PHONE_FRAME			_IOW ('q', 0x8D, int)
+#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
+#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
+#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
+
+#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
+#define PHONE_PLAY_START		_IO  ('q', 0x91)
+#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
+#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
+#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
+#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
+#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
+#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
+#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
+#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
+#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
+#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
+#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
+#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
+#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
+#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
+#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
+#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
+#define PHONE_BUSY			_IO  ('q', 0xA1)
+#define PHONE_RINGBACK			_IO  ('q', 0xA2)
+#define PHONE_DIALTONE			_IO  ('q', 0xA3)
+#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
+
+#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
+#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
+
+#define PSTN_ON_HOOK		0
+#define PSTN_RINGING		1
+#define PSTN_OFF_HOOK		2
+#define PSTN_PULSE_DIAL		3
+
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
+#define PHONE_WINK			_IOW ('q', 0xAA, int)
+
+/******************************************************************************
+* 
+*  Codec Definitions
+* 
+******************************************************************************/
+typedef enum {
+	G723_63 = 1,
+	G723_53 = 2,
+	TS85 = 3,
+	TS48 = 4,
+	TS41 = 5,
+	G728 = 6,
+	G729 = 7,
+	ULAW = 8,
+	ALAW = 9,
+	LINEAR16 = 10,
+	LINEAR8 = 11,
+	WSS = 12,
+	G729B = 13
+} phone_codec;
+
+struct phone_codec_data
+{
+        phone_codec type;
+        unsigned short buf_min, buf_opt, buf_max;
+};
+
+#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
+#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
+
+/******************************************************************************
+* 
+* This controls the VAD/CNG functionality of G.723.1.  The driver will
+* always pass full size frames, any unused bytes will be padded with zeros,
+* and frames passed to the driver should also be padded with zeros.  The
+* frame type is encoded in the least significant two bits of the first
+* WORD of the frame as follows:
+*
+* bits 1-0	Frame Type	Data Rate		Significant Words
+* 00		0		G.723.1 6.3		12
+* 01		1		G.723.1 5.3		10
+* 10		2		VAD/CNG			 2
+* 11		3		Repeat last CNG		 2 bits
+* 
+******************************************************************************/
+#define PHONE_VAD			_IOW ('q', 0xA9, int)
+
+
+/******************************************************************************
+*
+* The exception structure allows us to multiplex multiple events onto the
+* select() exception set.  If any of these flags are set select() will
+* return with a positive indication on the exception set.  The dtmf_ready
+* bit indicates if there is data waiting in the DTMF buffer.  The
+* hookstate bit is set if there is a change in hookstate status, it does not
+* indicate the current state of the hookswitch.  The pstn_ring bit
+* indicates that the DAA on a LineJACK card has detected ring voltage on
+* the PSTN port.  The caller_id bit indicates that caller_id data has been
+* received and is available.  The pstn_wink bit indicates that the DAA on
+* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
+* and f3 bits indicate that the filter has been triggered by detecting the
+* frequency programmed into that filter.
+*
+* The remaining bits should be set to zero. They will become defined over time
+* for other interface cards and their needs.
+*
+******************************************************************************/
+struct phone_except
+{
+	unsigned int dtmf_ready:1;
+	unsigned int hookstate:1;
+	unsigned int pstn_ring:1;
+	unsigned int caller_id:1;
+	unsigned int pstn_wink:1;
+	unsigned int f0:1;
+	unsigned int f1:1;
+	unsigned int f2:1;
+	unsigned int f3:1;
+	unsigned int flash:1;
+	unsigned int fc0:1;
+	unsigned int fc1:1;
+	unsigned int fc2:1;
+	unsigned int fc3:1;
+	unsigned int reserved:18;
+};
+
+union telephony_exception {
+	struct phone_except bits;
+	unsigned int bytes;
+};
+
+
+#endif		/* TELEPHONY_H */
+
diff --git a/include/linux/termios.h b/include/linux/termios.h
new file mode 100644
index 000000000000..478662889f48
--- /dev/null
+++ b/include/linux/termios.h
@@ -0,0 +1,7 @@
+#ifndef _LINUX_TERMIOS_H
+#define _LINUX_TERMIOS_H
+
+#include <linux/types.h>
+#include <asm/termios.h>
+
+#endif
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
new file mode 100644
index 000000000000..d252f45a0f9b
--- /dev/null
+++ b/include/linux/thread_info.h
@@ -0,0 +1,92 @@
+/* thread_info.h: common low-level thread information accessors
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds
+ */
+
+#ifndef _LINUX_THREAD_INFO_H
+#define _LINUX_THREAD_INFO_H
+
+/*
+ * System call restart block. 
+ */
+struct restart_block {
+	long (*fn)(struct restart_block *);
+	unsigned long arg0, arg1, arg2, arg3;
+};
+
+extern long do_no_restart_syscall(struct restart_block *parm);
+
+#include <linux/bitops.h>
+#include <asm/thread_info.h>
+
+#ifdef __KERNEL__
+
+/*
+ * flag set/clear/test wrappers
+ * - pass TIF_xxxx constants to these functions
+ */
+
+static inline void set_thread_flag(int flag)
+{
+	set_bit(flag,&current_thread_info()->flags);
+}
+
+static inline void clear_thread_flag(int flag)
+{
+	clear_bit(flag,&current_thread_info()->flags);
+}
+
+static inline int test_and_set_thread_flag(int flag)
+{
+	return test_and_set_bit(flag,&current_thread_info()->flags);
+}
+
+static inline int test_and_clear_thread_flag(int flag)
+{
+	return test_and_clear_bit(flag,&current_thread_info()->flags);
+}
+
+static inline int test_thread_flag(int flag)
+{
+	return test_bit(flag,&current_thread_info()->flags);
+}
+
+static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	set_bit(flag,&ti->flags);
+}
+
+static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	clear_bit(flag,&ti->flags);
+}
+
+static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_and_set_bit(flag,&ti->flags);
+}
+
+static inline int test_and_clear_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_and_clear_bit(flag,&ti->flags);
+}
+
+static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_bit(flag,&ti->flags);
+}
+
+static inline void set_need_resched(void)
+{
+	set_thread_flag(TIF_NEED_RESCHED);
+}
+
+static inline void clear_need_resched(void)
+{
+	clear_thread_flag(TIF_NEED_RESCHED);
+}
+
+#endif
+
+#endif /* _LINUX_THREAD_INFO_H */
diff --git a/include/linux/threads.h b/include/linux/threads.h
new file mode 100644
index 000000000000..b59738ac6197
--- /dev/null
+++ b/include/linux/threads.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_THREADS_H
+#define _LINUX_THREADS_H
+
+#include <linux/config.h>
+
+/*
+ * The default limit for the nr of threads is now in
+ * /proc/sys/kernel/threads-max.
+ */
+
+/*
+ * Maximum supported processors that can run under SMP.  This value is
+ * set via configure setting.  The maximum is equal to the size of the
+ * bitmasks used on that platform, i.e. 32 or 64.  Setting this smaller
+ * saves quite a bit of memory.
+ */
+#ifdef CONFIG_SMP
+#define NR_CPUS		CONFIG_NR_CPUS
+#else
+#define NR_CPUS		1
+#endif
+
+#define MIN_THREADS_LEFT_FOR_ROOT 4
+
+/*
+ * This controls the default maximum pid allocated to a process
+ */
+#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
+
+/*
+ * A maximum of 4 million PIDs should be enough for a while:
+ */
+#define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \
+	(sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))
+
+#endif
diff --git a/include/linux/ticable.h b/include/linux/ticable.h
new file mode 100644
index 000000000000..8c2212086dcd
--- /dev/null
+++ b/include/linux/ticable.h
@@ -0,0 +1,44 @@
+/* Hey EMACS -*- linux-c -*-
+ *
+ * tipar/tiser/tiusb - low level driver for handling link cables
+ * designed for Texas Instruments graphing calculators.
+ *
+ * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _TICABLE_H 
+#define _TICABLE_H 1
+
+/* Internal default constants for the kernel module */
+#define TIMAXTIME 15      /* 1.5 seconds       */
+#define IO_DELAY  10      /* 10 micro-seconds  */
+
+/* Major & minor number for character devices */
+#define TIPAR_MAJOR  115 /* 0 to 7 */
+#define TIPAR_MINOR    0
+
+#define TISER_MAJOR  115 /* 8 to 15 */
+#define TISER_MINOR    8
+
+#define TIUSB_MAJOR  115  /* 16 to 31 */
+#define TIUSB_MINOR   16
+
+/*
+ * Request values for the 'ioctl' function.
+ */
+#define IOCTL_TIPAR_DELAY     _IOW('p', 0xa8, int) /* set delay   */
+#define IOCTL_TIPAR_TIMEOUT   _IOW('p', 0xa9, int) /* set timeout */
+
+#define IOCTL_TISER_DELAY     _IOW('p', 0xa0, int) /* set delay   */
+#define IOCTL_TISER_TIMEOUT   _IOW('p', 0xa1, int) /* set timeout */
+
+#define IOCTL_TIUSB_TIMEOUT        _IOW('N', 0x20, int) /* set timeout */
+#define IOCTL_TIUSB_RESET_DEVICE   _IOW('N', 0x21, int) /* reset device */
+#define IOCTL_TIUSB_RESET_PIPES    _IOW('N', 0x22, int) /* reset both pipes*/
+#define IOCTL_TIUSB_GET_MAXPS      _IOR('N', 0x23, int) /* max packet size */
+#define IOCTL_TIUSB_GET_DEVID      _IOR('N', 0x24, int) /* get device type */
+
+#endif /* TICABLE_H */
diff --git a/include/linux/time.h b/include/linux/time.h
new file mode 100644
index 000000000000..5634497ff5df
--- /dev/null
+++ b/include/linux/time.h
@@ -0,0 +1,181 @@
+#ifndef _LINUX_TIME_H
+#define _LINUX_TIME_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <linux/seqlock.h>
+#endif
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+	time_t	tv_sec;		/* seconds */
+	long	tv_nsec;	/* nanoseconds */
+};
+#endif /* _STRUCT_TIMESPEC */
+
+struct timeval {
+	time_t		tv_sec;		/* seconds */
+	suseconds_t	tv_usec;	/* microseconds */
+};
+
+struct timezone {
+	int	tz_minuteswest;	/* minutes west of Greenwich */
+	int	tz_dsttime;	/* type of dst correction */
+};
+
+#ifdef __KERNEL__
+
+/* Parameters used to convert the timespec values */
+#ifndef USEC_PER_SEC
+#define USEC_PER_SEC (1000000L)
+#endif
+
+#ifndef NSEC_PER_SEC
+#define NSEC_PER_SEC (1000000000L)
+#endif
+
+#ifndef NSEC_PER_USEC
+#define NSEC_PER_USEC (1000L)
+#endif
+
+static __inline__ int timespec_equal(struct timespec *a, struct timespec *b) 
+{ 
+	return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
+} 
+
+/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
+ * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
+ * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
+ *
+ * [For the Julian calendar (which was used in Russia before 1917,
+ * Britain & colonies before 1752, anywhere else before 1582,
+ * and is still in use by some communities) leave out the
+ * -year/100+year/400 terms, and add 10.]
+ *
+ * This algorithm was first published by Gauss (I think).
+ *
+ * WARNING: this function will overflow on 2106-02-07 06:28:16 on
+ * machines were long is 32-bit! (However, as time_t is signed, we
+ * will already get problems at other places on 2038-01-19 03:14:08)
+ */
+static inline unsigned long
+mktime (unsigned int year, unsigned int mon,
+	unsigned int day, unsigned int hour,
+	unsigned int min, unsigned int sec)
+{
+	if (0 >= (int) (mon -= 2)) {	/* 1..12 -> 11,12,1..10 */
+		mon += 12;		/* Puts Feb last since it has leap day */
+		year -= 1;
+	}
+
+	return (((
+		(unsigned long) (year/4 - year/100 + year/400 + 367*mon/12 + day) +
+			year*365 - 719499
+	    )*24 + hour /* now have hours */
+	  )*60 + min /* now have minutes */
+	)*60 + sec; /* finally seconds */
+}
+
+extern struct timespec xtime;
+extern struct timespec wall_to_monotonic;
+extern seqlock_t xtime_lock;
+
+static inline unsigned long get_seconds(void)
+{ 
+	return xtime.tv_sec;
+}
+
+struct timespec current_kernel_time(void);
+
+#define CURRENT_TIME (current_kernel_time())
+#define CURRENT_TIME_SEC ((struct timespec) { xtime.tv_sec, 0 })
+
+extern void do_gettimeofday(struct timeval *tv);
+extern int do_settimeofday(struct timespec *tv);
+extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz);
+extern void clock_was_set(void); // call when ever the clock is set
+extern int do_posix_clock_monotonic_gettime(struct timespec *tp);
+extern long do_nanosleep(struct timespec *t);
+extern long do_utimes(char __user * filename, struct timeval * times);
+struct itimerval;
+extern int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue);
+extern int do_getitimer(int which, struct itimerval *value);
+extern void getnstimeofday (struct timespec *tv);
+
+extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
+
+static inline void
+set_normalized_timespec (struct timespec *ts, time_t sec, long nsec)
+{
+	while (nsec > NSEC_PER_SEC) {
+		nsec -= NSEC_PER_SEC;
+		++sec;
+	}
+	while (nsec < 0) {
+		nsec += NSEC_PER_SEC;
+		--sec;
+	}
+	ts->tv_sec = sec;
+	ts->tv_nsec = nsec;
+}
+
+#endif /* __KERNEL__ */
+
+#define NFDBITS			__NFDBITS
+
+#define FD_SETSIZE		__FD_SETSIZE
+#define FD_SET(fd,fdsetp)	__FD_SET(fd,fdsetp)
+#define FD_CLR(fd,fdsetp)	__FD_CLR(fd,fdsetp)
+#define FD_ISSET(fd,fdsetp)	__FD_ISSET(fd,fdsetp)
+#define FD_ZERO(fdsetp)		__FD_ZERO(fdsetp)
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting.
+ */
+#define	ITIMER_REAL	0
+#define	ITIMER_VIRTUAL	1
+#define	ITIMER_PROF	2
+
+struct  itimerspec {
+        struct  timespec it_interval;    /* timer period */
+        struct  timespec it_value;       /* timer expiration */
+};
+
+struct	itimerval {
+	struct	timeval it_interval;	/* timer interval */
+	struct	timeval it_value;	/* current value */
+};
+
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers).
+ */
+#define CLOCK_REALTIME		  0
+#define CLOCK_MONOTONIC	  1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID	 3
+#define CLOCK_REALTIME_HR	 4
+#define CLOCK_MONOTONIC_HR	  5
+
+/*
+ * The IDs of various hardware clocks
+ */
+
+
+#define CLOCK_SGI_CYCLE 10
+#define MAX_CLOCKS 16
+#define CLOCKS_MASK  (CLOCK_REALTIME | CLOCK_MONOTONIC | \
+                     CLOCK_REALTIME_HR | CLOCK_MONOTONIC_HR)
+#define CLOCKS_MONO (CLOCK_MONOTONIC & CLOCK_MONOTONIC_HR)
+
+/*
+ * The various flags for setting POSIX.1b interval timers.
+ */
+
+#define TIMER_ABSTIME 0x01
+
+
+#endif
diff --git a/include/linux/timer.h b/include/linux/timer.h
new file mode 100644
index 000000000000..90db1cc62ddd
--- /dev/null
+++ b/include/linux/timer.h
@@ -0,0 +1,102 @@
+#ifndef _LINUX_TIMER_H
+#define _LINUX_TIMER_H
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+
+struct tvec_t_base_s;
+
+struct timer_list {
+	struct list_head entry;
+	unsigned long expires;
+
+	spinlock_t lock;
+	unsigned long magic;
+
+	void (*function)(unsigned long);
+	unsigned long data;
+
+	struct tvec_t_base_s *base;
+};
+
+#define TIMER_MAGIC	0x4b87ad6e
+
+#define TIMER_INITIALIZER(_function, _expires, _data) {		\
+		.function = (_function),			\
+		.expires = (_expires),				\
+		.data = (_data),				\
+		.base = NULL,					\
+		.magic = TIMER_MAGIC,				\
+		.lock = SPIN_LOCK_UNLOCKED,			\
+	}
+
+/***
+ * init_timer - initialize a timer.
+ * @timer: the timer to be initialized
+ *
+ * init_timer() must be done to a timer prior calling *any* of the
+ * other timer functions.
+ */
+static inline void init_timer(struct timer_list * timer)
+{
+	timer->base = NULL;
+	timer->magic = TIMER_MAGIC;
+	spin_lock_init(&timer->lock);
+}
+
+/***
+ * timer_pending - is a timer pending?
+ * @timer: the timer in question
+ *
+ * timer_pending will tell whether a given timer is currently pending,
+ * or not. Callers must ensure serialization wrt. other operations done
+ * to this timer, eg. interrupt contexts, or other CPUs on SMP.
+ *
+ * return value: 1 if the timer is pending, 0 if not.
+ */
+static inline int timer_pending(const struct timer_list * timer)
+{
+	return timer->base != NULL;
+}
+
+extern void add_timer_on(struct timer_list *timer, int cpu);
+extern int del_timer(struct timer_list * timer);
+extern int __mod_timer(struct timer_list *timer, unsigned long expires);
+extern int mod_timer(struct timer_list *timer, unsigned long expires);
+
+extern unsigned long next_timer_interrupt(void);
+
+/***
+ * add_timer - start a timer
+ * @timer: the timer to be added
+ *
+ * The kernel will do a ->function(->data) callback from the
+ * timer interrupt at the ->expired point in the future. The
+ * current time is 'jiffies'.
+ *
+ * The timer's ->expired, ->function (and if the handler uses it, ->data)
+ * fields must be set prior calling this function.
+ *
+ * Timers with an ->expired field in the past will be executed in the next
+ * timer tick.
+ */
+static inline void add_timer(struct timer_list * timer)
+{
+	__mod_timer(timer, timer->expires);
+}
+
+#ifdef CONFIG_SMP
+  extern int del_timer_sync(struct timer_list *timer);
+  extern int del_singleshot_timer_sync(struct timer_list *timer);
+#else
+# define del_timer_sync(t) del_timer(t)
+# define del_singleshot_timer_sync(t) del_timer(t)
+#endif
+
+extern void init_timers(void);
+extern void run_local_timers(void);
+extern void it_real_fn(unsigned long);
+
+#endif
diff --git a/include/linux/times.h b/include/linux/times.h
new file mode 100644
index 000000000000..e2d3020742a6
--- /dev/null
+++ b/include/linux/times.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_TIMES_H
+#define _LINUX_TIMES_H
+
+#include <linux/types.h>
+
+struct tms {
+	clock_t tms_utime;
+	clock_t tms_stime;
+	clock_t tms_cutime;
+	clock_t tms_cstime;
+};
+
+#endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
new file mode 100644
index 000000000000..74fdd07d3792
--- /dev/null
+++ b/include/linux/timex.h
@@ -0,0 +1,320 @@
+/*****************************************************************************
+ *                                                                           *
+ * Copyright (c) David L. Mills 1993                                         *
+ *                                                                           *
+ * Permission to use, copy, modify, and distribute this software and its     *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the   *
+ * copyright notice and this permission notice appear in supporting          *
+ * documentation, and that the name University of Delaware not be used in    *
+ * advertising or publicity pertaining to distribution of the software       *
+ * without specific, written prior permission.  The University of Delaware   *
+ * makes no representations about the suitability this software for any      *
+ * purpose.  It is provided "as is" without express or implied warranty.     *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97	Russell King
+ *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ *	for ARM machines
+ *
+ *  9 Jan 97    Adrian Sun
+ *      Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94	David L. Mills
+ *	Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94	David L. Mills
+ *	Moved defines from kernel routines to header file and added new
+ *	defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94	David L. Mills
+ *	Revised status codes and structures for external clock and PPS
+ *	signal discipline.
+ *
+ * 28 Nov 93	David L. Mills
+ *	Adjusted parameters to improve stability and increase poll
+ *	interval.
+ *
+ * 17 Sep 93    David L. Mills
+ *      Created file $NTP/include/sys/timex.h
+ * 07 Oct 93    Torsten Duwe
+ *      Derived linux/timex.h
+ * 1995-08-13    Torsten Duwe
+ *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30    Ulrich Windl
+ *      Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12    Christoph Lameter
+ *      Reworked time interpolation logic
+ */
+#ifndef _LINUX_TIMEX_H
+#define _LINUX_TIMEX_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/time.h>
+
+#include <asm/param.h>
+#include <asm/timex.h>
+
+/*
+ * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
+ * for a slightly underdamped convergence characteristic. SHIFT_KH
+ * establishes the damping of the FLL and is chosen by wisdom and black
+ * art.
+ *
+ * MAXTC establishes the maximum time constant of the PLL. With the
+ * SHIFT_KG and SHIFT_KF values given and a time constant range from
+ * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
+ * respectively.
+ */
+#define SHIFT_KG 6		/* phase factor (shift) */
+#define SHIFT_KF 16		/* PLL frequency factor (shift) */
+#define SHIFT_KH 2		/* FLL frequency factor (shift) */
+#define MAXTC 6			/* maximum time constant (shift) */
+
+/*
+ * The SHIFT_SCALE define establishes the decimal point of the time_phase
+ * variable which serves as an extension to the low-order bits of the
+ * system clock variable. The SHIFT_UPDATE define establishes the decimal
+ * point of the time_offset variable which represents the current offset
+ * with respect to standard time. The FINENSEC define represents 1 nsec in
+ * scaled units.
+ *
+ * SHIFT_USEC defines the scaling (shift) of the time_freq and
+ * time_tolerance variables, which represent the current frequency
+ * offset and maximum frequency tolerance.
+ *
+ * FINENSEC is 1 ns in SHIFT_UPDATE units of the time_phase variable.
+ */
+#define SHIFT_SCALE 22		/* phase scale (shift) */
+#define SHIFT_UPDATE (SHIFT_KG + MAXTC) /* time offset scale (shift) */
+#define SHIFT_USEC 16		/* frequency offset scale (shift) */
+#define FINENSEC (1L << (SHIFT_SCALE - 10)) /* ~1 ns in phase units */
+
+#define MAXPHASE 512000L        /* max phase error (us) */
+#define MAXFREQ (512L << SHIFT_USEC)  /* max frequency error (ppm) */
+#define MAXTIME (200L << PPS_AVG) /* max PPS error (jitter) (200 us) */
+#define MINSEC 16L              /* min interval between updates (s) */
+#define MAXSEC 1200L            /* max interval between updates (s) */
+#define	NTP_PHASE_LIMIT	(MAXPHASE << 5)	/* beyond max. dispersion */
+
+/*
+ * The following defines are used only if a pulse-per-second (PPS)
+ * signal is available and connected via a modem control lead, such as
+ * produced by the optional ppsclock feature incorporated in the Sun
+ * asynch driver. They establish the design parameters of the frequency-
+ * lock loop used to discipline the CPU clock oscillator to the PPS
+ * signal.
+ *
+ * PPS_AVG is the averaging factor for the frequency loop, as well as
+ * the time and frequency dispersion.
+ *
+ * PPS_SHIFT and PPS_SHIFTMAX specify the minimum and maximum
+ * calibration intervals, respectively, in seconds as a power of two.
+ *
+ * PPS_VALID is the maximum interval before the PPS signal is considered
+ * invalid and protocol updates used directly instead.
+ *
+ * MAXGLITCH is the maximum interval before a time offset of more than
+ * MAXTIME is believed.
+ */
+#define PPS_AVG 2		/* pps averaging constant (shift) */
+#define PPS_SHIFT 2		/* min interval duration (s) (shift) */
+#define PPS_SHIFTMAX 8		/* max interval duration (s) (shift) */
+#define PPS_VALID 120		/* pps signal watchdog max (s) */
+#define MAXGLITCH 30		/* pps signal glitch max (s) */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval time;	/* (read only) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TICK		0x4000	/* tick value */
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+
+/* xntp 3.4 compatibility names */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_CLKB	ADJ_TICK
+#define MOD_CLKA	ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
+
+#ifdef __KERNEL__
+/*
+ * kernel variables
+ * Note: maximum error = NTP synch distance = dispersion + delay / 2;
+ * estimated error = NTP dispersion.
+ */
+extern unsigned long tick_usec;		/* USER_HZ period (usec) */
+extern unsigned long tick_nsec;		/* ACTHZ          period (nsec) */
+extern int tickadj;			/* amount of adjustment per tick */
+
+/*
+ * phase-lock loop variables
+ */
+extern int time_state;		/* clock status */
+extern int time_status;		/* clock synchronization status bits */
+extern long time_offset;	/* time adjustment (us) */
+extern long time_constant;	/* pll time constant */
+extern long time_tolerance;	/* frequency tolerance (ppm) */
+extern long time_precision;	/* clock precision (us) */
+extern long time_maxerror;	/* maximum error */
+extern long time_esterror;	/* estimated error */
+
+extern long time_freq;		/* frequency offset (scaled ppm) */
+extern long time_reftime;	/* time at last adjustment (s) */
+
+extern long time_adjust;	/* The amount of adjtime left */
+extern long time_next_adjust;	/* Value for time_adjust at next tick */
+
+/* interface variables pps->timer interrupt */
+extern long pps_offset;		/* pps time offset (us) */
+extern long pps_jitter;		/* time dispersion (jitter) (us) */
+extern long pps_freq;		/* frequency offset (scaled ppm) */
+extern long pps_stabil;		/* frequency dispersion (scaled ppm) */
+extern long pps_valid;		/* pps signal watchdog counter */
+
+/* interface variables pps->adjtimex */
+extern int pps_shift;		/* interval duration (s) (shift) */
+extern long pps_jitcnt;		/* jitter limit exceeded */
+extern long pps_calcnt;		/* calibration intervals */
+extern long pps_errcnt;		/* calibration errors */
+extern long pps_stbcnt;		/* stability limit exceeded */
+
+#ifdef CONFIG_TIME_INTERPOLATION
+
+#define TIME_SOURCE_CPU 0
+#define TIME_SOURCE_MMIO64 1
+#define TIME_SOURCE_MMIO32 2
+#define TIME_SOURCE_FUNCTION 3
+
+/* For proper operations time_interpolator clocks must run slightly slower
+ * than the standard clock since the interpolator may only correct by having
+ * time jump forward during a tick. A slower clock is usually a side effect
+ * of the integer divide of the nanoseconds in a second by the frequency.
+ * The accuracy of the division can be increased by specifying a shift.
+ * However, this may cause the clock not to be slow enough.
+ * The interpolator will self-tune the clock by slowing down if no
+ * resets occur or speeding up if the time jumps per analysis cycle
+ * become too high.
+ *
+ * Setting jitter compensates for a fluctuating timesource by comparing
+ * to the last value read from the timesource to insure that an earlier value
+ * is not returned by a later call. The price to pay
+ * for the compensation is that the timer routines are not as scalable anymore.
+ */
+
+struct time_interpolator {
+	u16 source;			/* time source flags */
+	u8 shift;			/* increases accuracy of multiply by shifting. */
+				/* Note that bits may be lost if shift is set too high */
+	u8 jitter;			/* if set compensate for fluctuations */
+	u32 nsec_per_cyc;		/* set by register_time_interpolator() */
+	void *addr;			/* address of counter or function */
+	u64 mask;			/* mask the valid bits of the counter */
+	unsigned long offset;		/* nsec offset at last update of interpolator */
+	u64 last_counter;		/* counter value in units of the counter at last update */
+	u64 last_cycle;			/* Last timer value if TIME_SOURCE_JITTER is set */
+	u64 frequency;			/* frequency in counts/second */
+	long drift;			/* drift in parts-per-million (or -1) */
+	unsigned long skips;		/* skips forward */
+	unsigned long ns_skipped;	/* nanoseconds skipped */
+	struct time_interpolator *next;
+};
+
+extern void register_time_interpolator(struct time_interpolator *);
+extern void unregister_time_interpolator(struct time_interpolator *);
+extern void time_interpolator_reset(void);
+extern unsigned long time_interpolator_get_offset(void);
+
+#else /* !CONFIG_TIME_INTERPOLATION */
+
+static inline void
+time_interpolator_reset(void)
+{
+}
+
+#endif /* !CONFIG_TIME_INTERPOLATION */
+
+#endif /* KERNEL */
+
+#endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
new file mode 100644
index 000000000000..2c9e847f6ed1
--- /dev/null
+++ b/include/linux/tiocl.h
@@ -0,0 +1,38 @@
+#ifndef _LINUX_TIOCL_H
+#define _LINUX_TIOCL_H
+
+#define TIOCL_SETSEL	2	/* set a selection */
+#define 	TIOCL_SELCHAR	0	/* select characters */
+#define 	TIOCL_SELWORD	1	/* select whole words */
+#define 	TIOCL_SELLINE	2	/* select whole lines */
+#define 	TIOCL_SELPOINTER	3	/* show the pointer */
+#define 	TIOCL_SELCLEAR	4	/* clear visibility of selection */
+#define 	TIOCL_SELMOUSEREPORT	16	/* report beginning of selection */
+#define 	TIOCL_SELBUTTONMASK	15	/* button mask for report */
+/* selection extent */
+struct tiocl_selection {
+	unsigned short xs;	/* X start */
+	unsigned short ys;	/* Y start */
+	unsigned short xe;	/* X end */
+	unsigned short ye;	/* Y end */
+	unsigned short sel_mode;	/* selection mode */
+};
+
+#define TIOCL_PASTESEL	3	/* paste previous selection */
+#define TIOCL_UNBLANKSCREEN	4	/* unblank screen */
+
+#define TIOCL_SELLOADLUT	5
+	/* set characters to be considered alphabetic when selecting */
+	/* u32[8] bit array, 4 bytes-aligned with type */
+
+/* these two don't return a value: they write it back in the type */
+#define TIOCL_GETSHIFTSTATE	6	/* write shift state */
+#define TIOCL_GETMOUSEREPORTING	7	/* write whether mouse event are reported */
+#define TIOCL_SETVESABLANK	10	/* set vesa blanking mode */
+#define TIOCL_SETKMSGREDIRECT	11	/* restrict kernel messages to a vt */
+#define TIOCL_GETFGCONSOLE	12	/* get foreground vt */
+#define TIOCL_SCROLLCONSOLE	13	/* scroll console */
+#define TIOCL_BLANKSCREEN	14	/* keep screen blank even if a key is pressed */
+#define TIOCL_BLANKEDSCREEN	15	/* return which vt was blanked */
+
+#endif /* _LINUX_TIOCL_H */
diff --git a/include/linux/topology.h b/include/linux/topology.h
new file mode 100644
index 000000000000..d70e8972c67f
--- /dev/null
+++ b/include/linux/topology.h
@@ -0,0 +1,136 @@
+/*
+ * include/linux/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _LINUX_TOPOLOGY_H
+#define _LINUX_TOPOLOGY_H
+
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <asm/topology.h>
+
+#ifndef node_has_online_mem
+#define node_has_online_mem(nid) (1)
+#endif
+
+#ifndef nr_cpus_node
+#define nr_cpus_node(node)							\
+	({									\
+		cpumask_t __tmp__;						\
+		__tmp__ = node_to_cpumask(node);				\
+		cpus_weight(__tmp__);						\
+	})
+#endif
+
+#define for_each_node_with_cpus(node)						\
+	for_each_online_node(node)						\
+		if (nr_cpus_node(node))
+
+#ifndef node_distance
+/* Conform to ACPI 2.0 SLIT distance definitions */
+#define LOCAL_DISTANCE		10
+#define REMOTE_DISTANCE		20
+#define node_distance(from,to)	((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
+#endif
+#ifndef PENALTY_FOR_NODE_WITH_CPUS
+#define PENALTY_FOR_NODE_WITH_CPUS	(1)
+#endif
+
+/*
+ * Below are the 3 major initializers used in building sched_domains:
+ * SD_SIBLING_INIT, for SMT domains
+ * SD_CPU_INIT, for SMP domains
+ * SD_NODE_INIT, for NUMA domains
+ *
+ * Any architecture that cares to do any tuning to these values should do so
+ * by defining their own arch-specific initializer in include/asm/topology.h.
+ * A definition there will automagically override these default initializers
+ * and allow arch-specific performance tuning of sched_domains.
+ */
+#ifdef CONFIG_SCHED_SMT
+/* MCD - Do we really need this?  It is always on if CONFIG_SCHED_SMT is,
+ * so can't we drop this in favor of CONFIG_SCHED_SMT?
+ */
+#define ARCH_HAS_SCHED_WAKE_IDLE
+/* Common values for SMT siblings */
+#ifndef SD_SIBLING_INIT
+#define SD_SIBLING_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 1,			\
+	.max_interval		= 2,			\
+	.busy_factor		= 8,			\
+	.imbalance_pct		= 110,			\
+	.cache_hot_time		= 0,			\
+	.cache_nice_tries	= 0,			\
+	.per_cpu_gain		= 25,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_AFFINE	\
+				| SD_WAKE_IDLE		\
+				| SD_SHARE_CPUPOWER,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+#endif
+#endif /* CONFIG_SCHED_SMT */
+
+/* Common values for CPUs */
+#ifndef SD_CPU_INIT
+#define SD_CPU_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 1,			\
+	.max_interval		= 4,			\
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (5*1000000/2),	\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_AFFINE	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+#endif
+
+#ifdef CONFIG_NUMA
+#ifndef SD_NODE_INIT
+#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
+#endif
+#endif /* CONFIG_NUMA */
+
+#endif /* _LINUX_TOPOLOGY_H */
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
new file mode 100644
index 000000000000..916e5e3a699b
--- /dev/null
+++ b/include/linux/toshiba.h
@@ -0,0 +1,36 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
+ *
+ * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_TOSHIBA_H
+#define _LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+
+typedef struct {
+	unsigned int eax;
+	unsigned int ebx __attribute__ ((packed));
+	unsigned int ecx __attribute__ ((packed));
+	unsigned int edx __attribute__ ((packed));
+	unsigned int esi __attribute__ ((packed));
+	unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+#endif
diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h
new file mode 100644
index 000000000000..87d98d1faefb
--- /dev/null
+++ b/include/linux/transport_class.h
@@ -0,0 +1,95 @@
+/*
+ * transport_class.h - a generic container for all transport classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _TRANSPORT_CLASS_H_
+#define _TRANSPORT_CLASS_H_
+
+#include <linux/device.h>
+#include <linux/attribute_container.h>
+
+struct transport_class {
+	struct class class;
+	int (*setup)(struct device *);
+	int (*configure)(struct device *);
+	int (*remove)(struct device *);
+};
+
+#define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg)			\
+struct transport_class cls = {						\
+	.class = {							\
+		.name = nm,						\
+	},								\
+	.setup = su,							\
+	.remove = rm,							\
+	.configure = cfg,						\
+}
+
+
+struct anon_transport_class {
+	struct transport_class tclass;
+	struct attribute_container container;
+};
+
+#define DECLARE_ANON_TRANSPORT_CLASS(cls, mtch, cfg)		\
+struct anon_transport_class cls = {				\
+	.tclass = {						\
+		.configure = cfg,				\
+	},							\
+	. container = {						\
+		.match = mtch,					\
+	},							\
+}
+
+#define class_to_transport_class(x) \
+	container_of(x, struct transport_class, class)
+
+struct transport_container {
+	struct attribute_container ac;
+	struct attribute_group *statistics;
+};
+
+#define attribute_container_to_transport_container(x) \
+	container_of(x, struct transport_container, ac)
+
+void transport_remove_device(struct device *);
+void transport_add_device(struct device *);
+void transport_setup_device(struct device *);
+void transport_configure_device(struct device *);
+void transport_destroy_device(struct device *);
+
+static inline void
+transport_register_device(struct device *dev)
+{
+	transport_setup_device(dev);
+	transport_add_device(dev);
+}
+
+static inline void
+transport_unregister_device(struct device *dev)
+{
+	transport_remove_device(dev);
+	transport_destroy_device(dev);
+}
+
+static inline int transport_container_register(struct transport_container *tc)
+{
+	return attribute_container_register(&tc->ac);
+}
+
+static inline int transport_container_unregister(struct transport_container *tc)
+{
+	return attribute_container_unregister(&tc->ac);
+}
+
+int transport_class_register(struct transport_class *);
+int anon_transport_class_register(struct anon_transport_class *);
+void transport_class_unregister(struct transport_class *);
+void anon_transport_class_unregister(struct anon_transport_class *);
+
+
+#endif
diff --git a/include/linux/trdevice.h b/include/linux/trdevice.h
new file mode 100644
index 000000000000..aaa1f337edcb
--- /dev/null
+++ b/include/linux/trdevice.h
@@ -0,0 +1,37 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Token-ring handlers.
+ *
+ * Version:	@(#)eth.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_TRDEVICE_H
+#define _LINUX_TRDEVICE_H
+
+
+#include <linux/if_tr.h>
+
+#ifdef __KERNEL__
+extern unsigned short	tr_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern void tr_source_route(struct sk_buff *skb, struct trh_hdr *trh, struct net_device *dev);
+extern struct net_device *alloc_trdev(int sizeof_priv);
+
+#endif
+
+#endif	/* _LINUX_TRDEVICE_H */
diff --git a/include/linux/tty.h b/include/linux/tty.h
new file mode 100644
index 000000000000..1b76106272d3
--- /dev/null
+++ b/include/linux/tty.h
@@ -0,0 +1,412 @@
+#ifndef _LINUX_TTY_H
+#define _LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_ldisc.h>
+
+#include <asm/system.h>
+
+
+/*
+ * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
+ * hardcoded at present.)
+ */
+#define NR_PTYS	CONFIG_LEGACY_PTY_COUNT   /* Number of legacy ptys */
+#define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
+#define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
+#define NR_LDISCS		16
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	u8  orig_x;		/* 0x00 */
+	u8  orig_y;		/* 0x01 */
+	u16 dontuse1;		/* 0x02 -- EXT_MEM_K sits here */
+	u16 orig_video_page;	/* 0x04 */
+	u8  orig_video_mode;	/* 0x06 */
+	u8  orig_video_cols;	/* 0x07 */
+	u16 unused2;		/* 0x08 */
+	u16 orig_video_ega_bx;	/* 0x0a */
+	u16 unused3;		/* 0x0c */
+	u8  orig_video_lines;	/* 0x0e */
+	u8  orig_video_isVGA;	/* 0x0f */
+	u16 orig_video_points;	/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	u16 lfb_width;		/* 0x12 */
+	u16 lfb_height;		/* 0x14 */
+	u16 lfb_depth;		/* 0x16 */
+	u32 lfb_base;		/* 0x18 */
+	u32 lfb_size;		/* 0x1c */
+	u16 dontuse2, dontuse3;	/* 0x20 -- CL_MAGIC and CL_OFFSET here */
+	u16 lfb_linelength;	/* 0x24 */
+	u8  red_size;		/* 0x26 */
+	u8  red_pos;		/* 0x27 */
+	u8  green_size;		/* 0x28 */
+	u8  green_pos;		/* 0x29 */
+	u8  blue_size;		/* 0x2a */
+	u8  blue_pos;		/* 0x2b */
+	u8  rsvd_size;		/* 0x2c */
+	u8  rsvd_pos;		/* 0x2d */
+	u16 vesapm_seg;		/* 0x2e */
+	u16 vesapm_off;		/* 0x30 */
+	u16 pages;		/* 0x32 */
+	u16 vesa_attributes;	/* 0x34 */
+				/* 0x36 -- 0x3f reserved for future expansion */
+};
+
+extern struct screen_info screen_info;
+
+#define ORIG_X			(screen_info.orig_x)
+#define ORIG_Y			(screen_info.orig_y)
+#define ORIG_VIDEO_MODE		(screen_info.orig_video_mode)
+#define ORIG_VIDEO_COLS 	(screen_info.orig_video_cols)
+#define ORIG_VIDEO_EGA_BX	(screen_info.orig_video_ega_bx)
+#define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
+#define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
+#define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+/*
+ * This character is the same as _POSIX_VDISABLE: it cannot be used as
+ * a c_cc[] character, but indicates that a particular special character
+ * isn't in use (eg VINTR has no character etc)
+ */
+#define __DISABLED_CHAR '\0'
+
+/*
+ * This is the flip buffer used for the tty driver.  The buffer is
+ * located in the tty structure, and is used as a high speed interface
+ * between the tty driver and the tty line discipline.
+ */
+#define TTY_FLIPBUF_SIZE 512
+
+struct tty_flip_buffer {
+	struct work_struct		work;
+	struct semaphore pty_sem;
+	char		*char_buf_ptr;
+	unsigned char	*flag_buf_ptr;
+	int		count;
+	int		buf_num;
+	unsigned char	char_buf[2*TTY_FLIPBUF_SIZE];
+	char		flag_buf[2*TTY_FLIPBUF_SIZE];
+	unsigned char	slop[4]; /* N.B. bug overwrites buffer by 1 */
+};
+/*
+ * The pty uses char_buf and flag_buf as a contiguous buffer
+ */
+#define PTY_BUF_SIZE	4*TTY_FLIPBUF_SIZE
+
+/*
+ * When a break, frame error, or parity error happens, these codes are
+ * stuffed into the flags buffer.
+ */
+#define TTY_NORMAL	0
+#define TTY_BREAK	1
+#define TTY_FRAME	2
+#define TTY_PARITY	3
+#define TTY_OVERRUN	4
+
+#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
+#define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
+
+#define _I_FLAG(tty,f)	((tty)->termios->c_iflag & (f))
+#define _O_FLAG(tty,f)	((tty)->termios->c_oflag & (f))
+#define _C_FLAG(tty,f)	((tty)->termios->c_cflag & (f))
+#define _L_FLAG(tty,f)	((tty)->termios->c_lflag & (f))
+
+#define I_IGNBRK(tty)	_I_FLAG((tty),IGNBRK)
+#define I_BRKINT(tty)	_I_FLAG((tty),BRKINT)
+#define I_IGNPAR(tty)	_I_FLAG((tty),IGNPAR)
+#define I_PARMRK(tty)	_I_FLAG((tty),PARMRK)
+#define I_INPCK(tty)	_I_FLAG((tty),INPCK)
+#define I_ISTRIP(tty)	_I_FLAG((tty),ISTRIP)
+#define I_INLCR(tty)	_I_FLAG((tty),INLCR)
+#define I_IGNCR(tty)	_I_FLAG((tty),IGNCR)
+#define I_ICRNL(tty)	_I_FLAG((tty),ICRNL)
+#define I_IUCLC(tty)	_I_FLAG((tty),IUCLC)
+#define I_IXON(tty)	_I_FLAG((tty),IXON)
+#define I_IXANY(tty)	_I_FLAG((tty),IXANY)
+#define I_IXOFF(tty)	_I_FLAG((tty),IXOFF)
+#define I_IMAXBEL(tty)	_I_FLAG((tty),IMAXBEL)
+#define I_IUTF8(tty)	_I_FLAG((tty),IUTF8)
+
+#define O_OPOST(tty)	_O_FLAG((tty),OPOST)
+#define O_OLCUC(tty)	_O_FLAG((tty),OLCUC)
+#define O_ONLCR(tty)	_O_FLAG((tty),ONLCR)
+#define O_OCRNL(tty)	_O_FLAG((tty),OCRNL)
+#define O_ONOCR(tty)	_O_FLAG((tty),ONOCR)
+#define O_ONLRET(tty)	_O_FLAG((tty),ONLRET)
+#define O_OFILL(tty)	_O_FLAG((tty),OFILL)
+#define O_OFDEL(tty)	_O_FLAG((tty),OFDEL)
+#define O_NLDLY(tty)	_O_FLAG((tty),NLDLY)
+#define O_CRDLY(tty)	_O_FLAG((tty),CRDLY)
+#define O_TABDLY(tty)	_O_FLAG((tty),TABDLY)
+#define O_BSDLY(tty)	_O_FLAG((tty),BSDLY)
+#define O_VTDLY(tty)	_O_FLAG((tty),VTDLY)
+#define O_FFDLY(tty)	_O_FLAG((tty),FFDLY)
+
+#define C_BAUD(tty)	_C_FLAG((tty),CBAUD)
+#define C_CSIZE(tty)	_C_FLAG((tty),CSIZE)
+#define C_CSTOPB(tty)	_C_FLAG((tty),CSTOPB)
+#define C_CREAD(tty)	_C_FLAG((tty),CREAD)
+#define C_PARENB(tty)	_C_FLAG((tty),PARENB)
+#define C_PARODD(tty)	_C_FLAG((tty),PARODD)
+#define C_HUPCL(tty)	_C_FLAG((tty),HUPCL)
+#define C_CLOCAL(tty)	_C_FLAG((tty),CLOCAL)
+#define C_CIBAUD(tty)	_C_FLAG((tty),CIBAUD)
+#define C_CRTSCTS(tty)	_C_FLAG((tty),CRTSCTS)
+
+#define L_ISIG(tty)	_L_FLAG((tty),ISIG)
+#define L_ICANON(tty)	_L_FLAG((tty),ICANON)
+#define L_XCASE(tty)	_L_FLAG((tty),XCASE)
+#define L_ECHO(tty)	_L_FLAG((tty),ECHO)
+#define L_ECHOE(tty)	_L_FLAG((tty),ECHOE)
+#define L_ECHOK(tty)	_L_FLAG((tty),ECHOK)
+#define L_ECHONL(tty)	_L_FLAG((tty),ECHONL)
+#define L_NOFLSH(tty)	_L_FLAG((tty),NOFLSH)
+#define L_TOSTOP(tty)	_L_FLAG((tty),TOSTOP)
+#define L_ECHOCTL(tty)	_L_FLAG((tty),ECHOCTL)
+#define L_ECHOPRT(tty)	_L_FLAG((tty),ECHOPRT)
+#define L_ECHOKE(tty)	_L_FLAG((tty),ECHOKE)
+#define L_FLUSHO(tty)	_L_FLAG((tty),FLUSHO)
+#define L_PENDIN(tty)	_L_FLAG((tty),PENDIN)
+#define L_IEXTEN(tty)	_L_FLAG((tty),IEXTEN)
+
+struct device;
+/*
+ * Where all of the state associated with a tty is kept while the tty
+ * is open.  Since the termios state should be kept even if the tty
+ * has been closed --- for things like the baud rate, etc --- it is
+ * not stored here, but rather a pointer to the real state is stored
+ * here.  Possible the winsize structure should have the same
+ * treatment, but (1) the default 80x24 is usually right and (2) it's
+ * most often used by a windowing system, which will set the correct
+ * size each time the window is created or resized anyway.
+ * 						- TYT, 9/14/92
+ */
+struct tty_struct {
+	int	magic;
+	struct tty_driver *driver;
+	int index;
+	struct tty_ldisc ldisc;
+	struct semaphore termios_sem;
+	struct termios *termios, *termios_locked;
+	char name[64];
+	int pgrp;
+	int session;
+	unsigned long flags;
+	int count;
+	struct winsize winsize;
+	unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
+	unsigned char low_latency:1, warned:1;
+	unsigned char ctrl_status;
+
+	struct tty_struct *link;
+	struct fasync_struct *fasync;
+	struct tty_flip_buffer flip;
+	int max_flip_cnt;
+	int alt_speed;		/* For magic substitution of 38400 bps */
+	wait_queue_head_t write_wait;
+	wait_queue_head_t read_wait;
+	struct work_struct hangup_work;
+	void *disc_data;
+	void *driver_data;
+	struct list_head tty_files;
+
+#define N_TTY_BUF_SIZE 4096
+	
+	/*
+	 * The following is data for the N_TTY line discipline.  For
+	 * historical reasons, this is included in the tty structure.
+	 */
+	unsigned int column;
+	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char closing:1;
+	unsigned short minimum_to_wake;
+	unsigned long overrun_time;
+	int num_overrun;
+	unsigned long process_char_map[256/(8*sizeof(unsigned long))];
+	char *read_buf;
+	int read_head;
+	int read_tail;
+	int read_cnt;
+	unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
+	int canon_data;
+	unsigned long canon_head;
+	unsigned int canon_column;
+	struct semaphore atomic_read;
+	struct semaphore atomic_write;
+	unsigned char *write_buf;
+	int write_cnt;
+	spinlock_t read_lock;
+	/* If the tty has a pending do_SAK, queue it here - akpm */
+	struct work_struct SAK_work;
+};
+
+/* tty magic number */
+#define TTY_MAGIC		0x5401
+
+/*
+ * These bits are used in the flags field of the tty structure.
+ * 
+ * So that interrupts won't be able to mess up the queues,
+ * copy_to_cooked must be atomic with respect to itself, as must
+ * tty->write.  Thus, you must use the inline functions set_bit() and
+ * clear_bit() to make things atomic.
+ */
+#define TTY_THROTTLED 		0	/* Call unthrottle() at threshold min */
+#define TTY_IO_ERROR 		1	/* Canse an I/O error (may be no ldisc too) */
+#define TTY_OTHER_CLOSED 	2	/* Other side (if any) has closed */
+#define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
+#define TTY_DEBUG 		4	/* Debugging */
+#define TTY_DO_WRITE_WAKEUP 	5	/* Call write_wakeup after queuing new */
+#define TTY_PUSH 		6	/* n_tty private */
+#define TTY_CLOSING 		7	/* ->close() in progress */
+#define TTY_DONT_FLIP 		8	/* Defer buffer flip */
+#define TTY_LDISC 		9	/* Line discipline attached */
+#define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
+#define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
+#define TTY_PTY_LOCK 		16	/* pty private */
+#define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
+#define TTY_HUPPED 		18	/* Post driver->hangup() */
+
+#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
+
+extern void tty_write_flush(struct tty_struct *);
+
+extern struct termios tty_std_termios;
+extern int fg_console, last_console, want_console;
+
+extern int kmsg_redirect;
+
+extern void console_init(void);
+extern int vcs_init(void);
+
+extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
+			      const char *routine);
+extern char *tty_name(struct tty_struct *tty, char *buf);
+extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
+extern int tty_check_change(struct tty_struct * tty);
+extern void stop_tty(struct tty_struct * tty);
+extern void start_tty(struct tty_struct * tty);
+extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
+extern int tty_register_driver(struct tty_driver *driver);
+extern int tty_unregister_driver(struct tty_driver *driver);
+extern void tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev);
+extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
+extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
+			     int buflen);
+extern void tty_write_message(struct tty_struct *tty, char *msg);
+
+extern int is_orphaned_pgrp(int pgrp);
+extern int is_ignored(int sig);
+extern int tty_signal(int sig, struct tty_struct *tty);
+extern void tty_hangup(struct tty_struct * tty);
+extern void tty_vhangup(struct tty_struct * tty);
+extern void tty_unhangup(struct file *filp);
+extern int tty_hung_up_p(struct file * filp);
+extern void do_SAK(struct tty_struct *tty);
+extern void disassociate_ctty(int priv);
+extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern int tty_get_baud_rate(struct tty_struct *tty);
+extern int tty_termios_baud_rate(struct termios *termios);
+
+extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
+extern void tty_ldisc_deref(struct tty_ldisc *);
+extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+
+extern struct tty_ldisc *tty_ldisc_get(int);
+extern void tty_ldisc_put(int);
+
+extern void tty_wakeup(struct tty_struct *tty);
+extern void tty_ldisc_flush(struct tty_struct *tty);
+
+struct semaphore;
+extern struct semaphore tty_sem;
+
+/* n_tty.c */
+extern struct tty_ldisc tty_ldisc_N_TTY;
+
+/* tty_ioctl.c */
+extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+		       unsigned int cmd, unsigned long arg);
+
+/* serial.c */
+
+extern void serial_console_init(void);
+ 
+/* pcxx.c */
+
+extern int pcxe_open(struct tty_struct *tty, struct file *filp);
+
+/* printk.c */
+
+extern void console_print(const char *);
+
+/* vt.c */
+
+extern int vt_ioctl(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg);
+
+static inline dev_t tty_devnum(struct tty_struct *tty)
+{
+	return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
+}
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
new file mode 100644
index 000000000000..b368b296d035
--- /dev/null
+++ b/include/linux/tty_driver.h
@@ -0,0 +1,279 @@
+#ifndef _LINUX_TTY_DRIVER_H
+#define _LINUX_TTY_DRIVER_H
+
+/*
+ * This structure defines the interface between the low-level tty
+ * driver and the tty routines.  The following routines can be
+ * defined; unless noted otherwise, they are optional, and can be
+ * filled in with a null pointer.
+ *
+ * int  (*open)(struct tty_struct * tty, struct file * filp);
+ *
+ * 	This routine is called when a particular tty device is opened.
+ * 	This routine is mandatory; if this routine is not filled in,
+ * 	the attempted open will fail with ENODEV.
+ *     
+ * void (*close)(struct tty_struct * tty, struct file * filp);
+ *
+ * 	This routine is called when a particular tty device is closed.
+ *
+ * int (*write)(struct tty_struct * tty,
+ * 		 const unsigned char *buf, int count);
+ *
+ * 	This routine is called by the kernel to write a series of
+ * 	characters to the tty device.  The characters may come from
+ * 	user space or kernel space.  This routine will return the
+ *	number of characters actually accepted for writing.  This
+ *	routine is mandatory.
+ *
+ * void (*put_char)(struct tty_struct *tty, unsigned char ch);
+ *
+ * 	This routine is called by the kernel to write a single
+ * 	character to the tty device.  If the kernel uses this routine,
+ * 	it must call the flush_chars() routine (if defined) when it is
+ * 	done stuffing characters into the driver.  If there is no room
+ * 	in the queue, the character is ignored.
+ *
+ * void (*flush_chars)(struct tty_struct *tty);
+ *
+ * 	This routine is called by the kernel after it has written a
+ * 	series of characters to the tty device using put_char().  
+ * 
+ * int  (*write_room)(struct tty_struct *tty);
+ *
+ * 	This routine returns the numbers of characters the tty driver
+ * 	will accept for queuing to be written.  This number is subject
+ * 	to change as output buffers get emptied, or if the output flow
+ *	control is acted.
+ * 
+ * int  (*ioctl)(struct tty_struct *tty, struct file * file,
+ * 	    unsigned int cmd, unsigned long arg);
+ *
+ * 	This routine allows the tty driver to implement
+ *	device-specific ioctl's.  If the ioctl number passed in cmd
+ * 	is not recognized by the driver, it should return ENOIOCTLCMD.
+ * 
+ * void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ *
+ * 	This routine allows the tty driver to be notified when
+ * 	device's termios settings have changed.  Note that a
+ * 	well-designed tty driver should be prepared to accept the case
+ * 	where old == NULL, and try to do something rational.
+ *
+ * void (*set_ldisc)(struct tty_struct *tty);
+ *
+ * 	This routine allows the tty driver to be notified when the
+ * 	device's termios settings have changed.
+ * 
+ * void (*throttle)(struct tty_struct * tty);
+ *
+ * 	This routine notifies the tty driver that input buffers for
+ * 	the line discipline are close to full, and it should somehow
+ * 	signal that no more characters should be sent to the tty.
+ * 
+ * void (*unthrottle)(struct tty_struct * tty);
+ *
+ * 	This routine notifies the tty drivers that it should signals
+ * 	that characters can now be sent to the tty without fear of
+ * 	overrunning the input buffers of the line disciplines.
+ * 
+ * void (*stop)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it should stop
+ * 	outputting characters to the tty device.  
+ * 
+ * void (*start)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it resume sending
+ *	characters to the tty device.
+ * 
+ * void (*hangup)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it should hangup the
+ * 	tty device.
+ *
+ * void (*break_ctl)(struct tty_stuct *tty, int state);
+ *
+ * 	This optional routine requests the tty driver to turn on or
+ * 	off BREAK status on the RS-232 port.  If state is -1,
+ * 	then the BREAK status should be turned on; if state is 0, then
+ * 	BREAK should be turned off.
+ *
+ * 	If this routine is implemented, the high-level tty driver will
+ * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
+ * 	TIOCCBRK.  Otherwise, these ioctls will be passed down to the
+ * 	driver to handle.
+ *
+ * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
+ * 
+ * 	This routine waits until the device has written out all of the
+ * 	characters in its transmitter FIFO.
+ *
+ * void (*send_xchar)(struct tty_struct *tty, char ch);
+ *
+ * 	This routine is used to send a high-priority XON/XOFF
+ * 	character to the device.
+ */
+
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/cdev.h>
+
+struct tty_struct;
+
+struct tty_operations {
+	int  (*open)(struct tty_struct * tty, struct file * filp);
+	void (*close)(struct tty_struct * tty, struct file * filp);
+	int  (*write)(struct tty_struct * tty,
+		      const unsigned char *buf, int count);
+	void (*put_char)(struct tty_struct *tty, unsigned char ch);
+	void (*flush_chars)(struct tty_struct *tty);
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg);
+	void (*set_termios)(struct tty_struct *tty, struct termios * old);
+	void (*throttle)(struct tty_struct * tty);
+	void (*unthrottle)(struct tty_struct * tty);
+	void (*stop)(struct tty_struct *tty);
+	void (*start)(struct tty_struct *tty);
+	void (*hangup)(struct tty_struct *tty);
+	void (*break_ctl)(struct tty_struct *tty, int state);
+	void (*flush_buffer)(struct tty_struct *tty);
+	void (*set_ldisc)(struct tty_struct *tty);
+	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
+	void (*send_xchar)(struct tty_struct *tty, char ch);
+	int (*read_proc)(char *page, char **start, off_t off,
+			  int count, int *eof, void *data);
+	int (*write_proc)(struct file *file, const char __user *buffer,
+			  unsigned long count, void *data);
+	int (*tiocmget)(struct tty_struct *tty, struct file *file);
+	int (*tiocmset)(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+};
+
+struct tty_driver {
+	int	magic;		/* magic number for this structure */
+	struct cdev cdev;
+	struct module	*owner;
+	const char	*driver_name;
+	const char	*devfs_name;
+	const char	*name;
+	int	name_base;	/* offset of printed name */
+	int	major;		/* major device number */
+	int	minor_start;	/* start of minor device number */
+	int	minor_num;	/* number of *possible* devices */
+	int	num;		/* number of devices allocated */
+	short	type;		/* type of tty driver */
+	short	subtype;	/* subtype of tty driver */
+	struct termios init_termios; /* Initial termios */
+	int	flags;		/* tty driver flags */
+	int	refcount;	/* for loadable tty drivers */
+	struct proc_dir_entry *proc_entry; /* /proc fs entry */
+	struct tty_driver *other; /* only used for the PTY driver */
+
+	/*
+	 * Pointer to the tty data structures
+	 */
+	struct tty_struct **ttys;
+	struct termios **termios;
+	struct termios **termios_locked;
+	void *driver_state;	/* only used for the PTY driver */
+	
+	/*
+	 * Interface routines from the upper tty layer to the tty
+	 * driver.	Will be replaced with struct tty_operations.
+	 */
+	int  (*open)(struct tty_struct * tty, struct file * filp);
+	void (*close)(struct tty_struct * tty, struct file * filp);
+	int  (*write)(struct tty_struct * tty,
+		      const unsigned char *buf, int count);
+	void (*put_char)(struct tty_struct *tty, unsigned char ch);
+	void (*flush_chars)(struct tty_struct *tty);
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg);
+	void (*set_termios)(struct tty_struct *tty, struct termios * old);
+	void (*throttle)(struct tty_struct * tty);
+	void (*unthrottle)(struct tty_struct * tty);
+	void (*stop)(struct tty_struct *tty);
+	void (*start)(struct tty_struct *tty);
+	void (*hangup)(struct tty_struct *tty);
+	void (*break_ctl)(struct tty_struct *tty, int state);
+	void (*flush_buffer)(struct tty_struct *tty);
+	void (*set_ldisc)(struct tty_struct *tty);
+	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
+	void (*send_xchar)(struct tty_struct *tty, char ch);
+	int (*read_proc)(char *page, char **start, off_t off,
+			  int count, int *eof, void *data);
+	int (*write_proc)(struct file *file, const char __user *buffer,
+			  unsigned long count, void *data);
+	int (*tiocmget)(struct tty_struct *tty, struct file *file);
+	int (*tiocmset)(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+
+	struct list_head tty_drivers;
+};
+
+extern struct list_head tty_drivers;
+
+struct tty_driver *alloc_tty_driver(int lines);
+void put_tty_driver(struct tty_driver *driver);
+void tty_set_operations(struct tty_driver *driver, struct tty_operations *op);
+
+/* tty driver magic number */
+#define TTY_DRIVER_MAGIC		0x5402
+
+/*
+ * tty driver flags
+ * 
+ * TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
+ * 	termios setting when the last process has closed the device.
+ * 	Used for PTY's, in particular.
+ * 
+ * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
+ * 	guarantee never not to set any special character handling
+ * 	flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR ||
+ * 	!INPCK)).  That is, if there is no reason for the driver to
+ * 	send notifications of parity and break characters up to the
+ * 	line driver, it won't do so.  This allows the line driver to
+ *	optimize for this case if this flag is set.  (Note that there
+ * 	is also a promise, if the above case is true, not to signal
+ * 	overruns, either.)
+ *
+ * TTY_DRIVER_NO_DEVFS --- if set, do not create devfs entries. This
+ *	is only used by tty_register_driver().
+ *
+ * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
+ *	use dynamic memory keyed through the devpts filesystem.  This
+ *	is only applicable to the pty driver.
+ */
+#define TTY_DRIVER_INSTALLED		0x0001
+#define TTY_DRIVER_RESET_TERMIOS	0x0002
+#define TTY_DRIVER_REAL_RAW		0x0004
+#define TTY_DRIVER_NO_DEVFS		0x0008
+#define TTY_DRIVER_DEVPTS_MEM		0x0010
+
+/* tty driver types */
+#define TTY_DRIVER_TYPE_SYSTEM		0x0001
+#define TTY_DRIVER_TYPE_CONSOLE		0x0002
+#define TTY_DRIVER_TYPE_SERIAL		0x0003
+#define TTY_DRIVER_TYPE_PTY		0x0004
+#define TTY_DRIVER_TYPE_SCC		0x0005	/* scc driver */
+#define TTY_DRIVER_TYPE_SYSCONS		0x0006
+
+/* system subtypes (magic, used by tty_io.c) */
+#define SYSTEM_TYPE_TTY			0x0001
+#define SYSTEM_TYPE_CONSOLE		0x0002
+#define SYSTEM_TYPE_SYSCONS		0x0003
+#define SYSTEM_TYPE_SYSPTMX		0x0004
+
+/* pty subtypes (magic, used by tty_io.c) */
+#define PTY_TYPE_MASTER			0x0001
+#define PTY_TYPE_SLAVE			0x0002
+
+/* serial subtype definitions */
+#define SERIAL_TYPE_NORMAL	1
+
+#endif /* #ifdef _LINUX_TTY_DRIVER_H */
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
new file mode 100644
index 000000000000..abe9bfcf226c
--- /dev/null
+++ b/include/linux/tty_flip.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_TTY_FLIP_H
+#define _LINUX_TTY_FLIP_H
+
+#ifdef INCLUDE_INLINE_FUNCS
+#define _INLINE_ extern
+#else
+#define _INLINE_ static __inline__
+#endif
+
+_INLINE_ void tty_insert_flip_char(struct tty_struct *tty,
+				   unsigned char ch, char flag)
+{
+	if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+		tty->flip.count++;
+		*tty->flip.flag_buf_ptr++ = flag;
+		*tty->flip.char_buf_ptr++ = ch;
+	}
+}
+
+_INLINE_ void tty_schedule_flip(struct tty_struct *tty)
+{
+	schedule_delayed_work(&tty->flip.work, 1);
+}
+
+#undef _INLINE_
+
+
+#endif /* _LINUX_TTY_FLIP_H */
+
+
+
+
+
+
+
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
new file mode 100644
index 000000000000..6066afde5ce4
--- /dev/null
+++ b/include/linux/tty_ldisc.h
@@ -0,0 +1,154 @@
+#ifndef _LINUX_TTY_LDISC_H
+#define _LINUX_TTY_LDISC_H
+
+/*
+ * This structure defines the interface between the tty line discipline
+ * implementation and the tty routines.  The following routines can be
+ * defined; unless noted otherwise, they are optional, and can be
+ * filled in with a null pointer.
+ *
+ * int	(*open)(struct tty_struct *);
+ *
+ * 	This function is called when the line discipline is associated
+ * 	with the tty.  The line discipline can use this as an
+ * 	opportunity to initialize any state needed by the ldisc routines.
+ * 
+ * void	(*close)(struct tty_struct *);
+ *
+ *	This function is called when the line discipline is being
+ * 	shutdown, either because the tty is being closed or because
+ * 	the tty is being changed to use a new line discipline
+ * 
+ * void	(*flush_buffer)(struct tty_struct *tty);
+ *
+ * 	This function instructs the line discipline to clear its
+ * 	buffers of any input characters it may have queued to be
+ * 	delivered to the user mode process.
+ * 
+ * ssize_t (*chars_in_buffer)(struct tty_struct *tty);
+ *
+ * 	This function returns the number of input characters the line
+ *	discipline may have queued up to be delivered to the user mode
+ *	process.
+ * 
+ * ssize_t (*read)(struct tty_struct * tty, struct file * file,
+ *		   unsigned char * buf, size_t nr);
+ *
+ * 	This function is called when the user requests to read from
+ * 	the tty.  The line discipline will return whatever characters
+ * 	it has buffered up for the user.  If this function is not
+ * 	defined, the user will receive an EIO error.
+ * 
+ * ssize_t (*write)(struct tty_struct * tty, struct file * file,
+ * 		    const unsigned char * buf, size_t nr);
+ *
+ * 	This function is called when the user requests to write to the
+ * 	tty.  The line discipline will deliver the characters to the
+ * 	low-level tty device for transmission, optionally performing
+ * 	some processing on the characters first.  If this function is
+ * 	not defined, the user will receive an EIO error.
+ * 
+ * int	(*ioctl)(struct tty_struct * tty, struct file * file,
+ * 		 unsigned int cmd, unsigned long arg);
+ *
+ *	This function is called when the user requests an ioctl which
+ * 	is not handled by the tty layer or the low-level tty driver.
+ * 	It is intended for ioctls which affect line discpline
+ * 	operation.  Note that the search order for ioctls is (1) tty
+ * 	layer, (2) tty low-level driver, (3) line discpline.  So a
+ * 	low-level driver can "grab" an ioctl request before the line
+ * 	discpline has a chance to see it.
+ * 
+ * void	(*set_termios)(struct tty_struct *tty, struct termios * old);
+ *
+ * 	This function notifies the line discpline that a change has
+ * 	been made to the termios structure.
+ * 
+ * int	(*poll)(struct tty_struct * tty, struct file * file,
+ * 		  poll_table *wait);
+ *
+ * 	This function is called when a user attempts to select/poll on a
+ * 	tty device.  It is solely the responsibility of the line
+ * 	discipline to handle poll requests.
+ *
+ * void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
+ * 		       char *fp, int count);
+ *
+ * 	This function is called by the low-level tty driver to send
+ * 	characters received by the hardware to the line discpline for
+ * 	processing.  <cp> is a pointer to the buffer of input
+ * 	character received by the device.  <fp> is a pointer to a
+ * 	pointer of flag bytes which indicate whether a character was
+ * 	received with a parity error, etc.
+ * 
+ * int	(*receive_room)(struct tty_struct *);
+ *
+ * 	This function is called by the low-level tty driver to
+ * 	determine how many characters the line discpline can accept.
+ * 	The low-level driver must not send more characters than was
+ * 	indicated by receive_room, or the line discpline may drop
+ * 	those characters.
+ * 
+ * void	(*write_wakeup)(struct tty_struct *);
+ *
+ * 	This function is called by the low-level tty driver to signal
+ * 	that line discpline should try to send more characters to the
+ * 	low-level driver for transmission.  If the line discpline does
+ * 	not have any more data to send, it can just return.
+ *
+ * int (*hangup)(struct tty_struct *)
+ *
+ *	Called on a hangup. Tells the discipline that it should
+ *	cease I/O to the tty driver. Can sleep. The driver should
+ *	seek to perform this action quickly but should wait until
+ *	any pending driver I/O is completed.
+ */
+
+#include <linux/fs.h>
+#include <linux/wait.h>
+
+struct tty_ldisc {
+	int	magic;
+	char	*name;
+	int	num;
+	int	flags;
+	
+	/*
+	 * The following routines are called from above.
+	 */
+	int	(*open)(struct tty_struct *);
+	void	(*close)(struct tty_struct *);
+	void	(*flush_buffer)(struct tty_struct *tty);
+	ssize_t	(*chars_in_buffer)(struct tty_struct *tty);
+	ssize_t	(*read)(struct tty_struct * tty, struct file * file,
+			unsigned char __user * buf, size_t nr);
+	ssize_t	(*write)(struct tty_struct * tty, struct file * file,
+			 const unsigned char * buf, size_t nr);	
+	int	(*ioctl)(struct tty_struct * tty, struct file * file,
+			 unsigned int cmd, unsigned long arg);
+	void	(*set_termios)(struct tty_struct *tty, struct termios * old);
+	unsigned int (*poll)(struct tty_struct *, struct file *,
+			     struct poll_table_struct *);
+	int	(*hangup)(struct tty_struct *tty);
+	
+	/*
+	 * The following routines are called from below.
+	 */
+	void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
+			       char *fp, int count);
+	int	(*receive_room)(struct tty_struct *);
+	void	(*write_wakeup)(struct tty_struct *);
+
+	struct  module *owner;
+	
+	int refcount;
+};
+
+#define TTY_LDISC_MAGIC	0x5403
+
+#define LDISC_FLAG_DEFINED	0x00000001
+
+#define MODULE_ALIAS_LDISC(ldisc) \
+	MODULE_ALIAS("tty-ldisc-" __stringify(ldisc))
+
+#endif /* _LINUX_TTY_LDISC_H */
diff --git a/include/linux/types.h b/include/linux/types.h
new file mode 100644
index 000000000000..dcb13f865df9
--- /dev/null
+++ b/include/linux/types.h
@@ -0,0 +1,172 @@
+#ifndef _LINUX_TYPES_H
+#define _LINUX_TYPES_H
+
+#ifdef	__KERNEL__
+#include <linux/config.h>
+
+#define BITS_TO_LONGS(bits) \
+	(((bits)+BITS_PER_LONG-1)/BITS_PER_LONG)
+#define DECLARE_BITMAP(name,bits) \
+	unsigned long name[BITS_TO_LONGS(bits)]
+#endif
+
+#include <linux/posix_types.h>
+#include <asm/types.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+
+typedef __u32 __kernel_dev_t;
+
+typedef __kernel_fd_set		fd_set;
+typedef __kernel_dev_t		dev_t;
+typedef __kernel_ino_t		ino_t;
+typedef __kernel_mode_t		mode_t;
+typedef __kernel_nlink_t	nlink_t;
+typedef __kernel_off_t		off_t;
+typedef __kernel_pid_t		pid_t;
+typedef __kernel_daddr_t	daddr_t;
+typedef __kernel_key_t		key_t;
+typedef __kernel_suseconds_t	suseconds_t;
+typedef __kernel_timer_t	timer_t;
+typedef __kernel_clockid_t	clockid_t;
+typedef __kernel_mqd_t		mqd_t;
+
+#ifdef __KERNEL__
+typedef __kernel_uid32_t	uid_t;
+typedef __kernel_gid32_t	gid_t;
+typedef __kernel_uid16_t        uid16_t;
+typedef __kernel_gid16_t        gid16_t;
+
+#ifdef CONFIG_UID16
+/* This is defined by include/asm-{arch}/posix_types.h */
+typedef __kernel_old_uid_t	old_uid_t;
+typedef __kernel_old_gid_t	old_gid_t;
+#endif /* CONFIG_UID16 */
+
+/* libc5 includes this file to define uid_t, thus uid_t can never change
+ * when it is included by non-kernel code
+ */
+#else
+typedef __kernel_uid_t		uid_t;
+typedef __kernel_gid_t		gid_t;
+#endif /* __KERNEL__ */
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __kernel_loff_t		loff_t;
+#endif
+
+/*
+ * The following typedefs are also protected by individual ifdefs for
+ * historical reasons:
+ */
+#ifndef _SIZE_T
+#define _SIZE_T
+typedef __kernel_size_t		size_t;
+#endif
+
+#ifndef _SSIZE_T
+#define _SSIZE_T
+typedef __kernel_ssize_t	ssize_t;
+#endif
+
+#ifndef _PTRDIFF_T
+#define _PTRDIFF_T
+typedef __kernel_ptrdiff_t	ptrdiff_t;
+#endif
+
+#ifndef _TIME_T
+#define _TIME_T
+typedef __kernel_time_t		time_t;
+#endif
+
+#ifndef _CLOCK_T
+#define _CLOCK_T
+typedef __kernel_clock_t	clock_t;
+#endif
+
+#ifndef _CADDR_T
+#define _CADDR_T
+typedef __kernel_caddr_t	caddr_t;
+#endif
+
+/* bsd */
+typedef unsigned char		u_char;
+typedef unsigned short		u_short;
+typedef unsigned int		u_int;
+typedef unsigned long		u_long;
+
+/* sysv */
+typedef unsigned char		unchar;
+typedef unsigned short		ushort;
+typedef unsigned int		uint;
+typedef unsigned long		ulong;
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+
+typedef		__u8		u_int8_t;
+typedef		__s8		int8_t;
+typedef		__u16		u_int16_t;
+typedef		__s16		int16_t;
+typedef		__u32		u_int32_t;
+typedef		__s32		int32_t;
+
+#endif /* !(__BIT_TYPES_DEFINED__) */
+
+typedef		__u8		uint8_t;
+typedef		__u16		uint16_t;
+typedef		__u32		uint32_t;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef		__u64		uint64_t;
+typedef		__u64		u_int64_t;
+typedef		__s64		int64_t;
+#endif
+
+/*
+ * The type used for indexing onto a disc or disc partition.
+ * If required, asm/types.h can override it and define
+ * HAVE_SECTOR_T
+ */
+#ifndef HAVE_SECTOR_T
+typedef unsigned long sector_t;
+#endif
+
+/*
+ * The type of an index into the pagecache.  Use a #define so asm/types.h
+ * can override it.
+ */
+#ifndef pgoff_t
+#define pgoff_t unsigned long
+#endif
+
+#endif /* __KERNEL_STRICT_NAMES */
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise __attribute__((bitwise))
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+#endif
+
+struct ustat {
+	__kernel_daddr_t	f_tfree;
+	__kernel_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udf_fs.h b/include/linux/udf_fs.h
new file mode 100644
index 000000000000..46e2bb945353
--- /dev/null
+++ b/include/linux/udf_fs.h
@@ -0,0 +1,59 @@
+/*
+ * udf_fs.h
+ *
+ * PURPOSE
+ *  Included by fs/filesystems.c
+ *
+ * DESCRIPTION
+ *  OSTA-UDF(tm) = Optical Storage Technology Association
+ *  Universal Disk Format.
+ *
+ *  This code is based on version 2.50 of the UDF specification,
+ *  and revision 3 of the ECMA 167 standard [equivalent to ISO 13346].
+ *    http://www.osta.org/ *    http://www.ecma.ch/
+ *    http://www.iso.org/
+ *
+ * CONTACTS
+ *	E-mail regarding any portion of the Linux UDF file system should be
+ *	directed to the development team mailing list (run by majordomo):
+ *		linux_udf@hpesjro.fc.hp.com
+ *
+ * COPYRIGHT
+ *	This file is distributed under the terms of the GNU General Public
+ *	License (GPL). Copies of the GPL can be obtained from:
+ *		ftp://prep.ai.mit.edu/pub/gnu/GPL
+ *	Each contributing author retains all rights to their own work.
+ *
+ *  (C) 1999-2004 Ben Fennema
+ *  (C) 1999-2000 Stelias Computing Inc
+ *
+ * HISTORY
+ *
+ */
+
+#ifndef _UDF_FS_H
+#define _UDF_FS_H 1
+
+#define UDF_PREALLOCATE
+#define UDF_DEFAULT_PREALLOC_BLOCKS	8
+
+#define UDFFS_DATE			"2004/29/09"
+#define UDFFS_VERSION			"0.9.8.1"
+
+#undef UDFFS_DEBUG
+
+#ifdef UDFFS_DEBUG
+#define udf_debug(f, a...) \
+	{ \
+		printk (KERN_DEBUG "UDF-fs DEBUG %s:%d:%s: ", \
+			__FILE__, __LINE__, __FUNCTION__); \
+		printk (f, ##a); \
+	}
+#else
+#define udf_debug(f, a...) /**/
+#endif
+
+#define udf_info(f, a...) \
+		printk (KERN_INFO "UDF-fs INFO " f, ##a);
+
+#endif /* _UDF_FS_H */
diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h
new file mode 100644
index 000000000000..62b15a4214e6
--- /dev/null
+++ b/include/linux/udf_fs_i.h
@@ -0,0 +1,78 @@
+/*
+ * udf_fs_i.h
+ *
+ * This file is intended for the Linux kernel/module. 
+ *
+ * CONTACTS
+ *	E-mail regarding any portion of the Linux UDF file system should be
+ *	directed to the development team mailing list (run by majordomo):
+ *		linux_udf@hpesjro.fc.hp.com
+ *
+ * COPYRIGHT
+ *	This file is distributed under the terms of the GNU General Public
+ *	License (GPL). Copies of the GPL can be obtained from:
+ *		ftp://prep.ai.mit.edu/pub/gnu/GPL
+ *	Each contributing author retains all rights to their own work.
+ */
+
+#ifndef _UDF_FS_I_H
+#define _UDF_FS_I_H 1
+
+#ifdef __KERNEL__
+
+#ifndef _ECMA_167_H
+typedef struct
+{
+	__u32			logicalBlockNum;
+	__u16			partitionReferenceNum;
+} __attribute__ ((packed)) lb_addr;
+
+typedef struct
+{
+	__u32			extLength;
+	__u32			extPosition;
+} __attribute__ ((packed)) short_ad;
+
+typedef struct
+{
+	__u32			extLength;
+	lb_addr			extLocation;
+	__u8			impUse[6];
+} __attribute__ ((packed)) long_ad;
+#endif
+
+struct udf_inode_info
+{
+	struct timespec		i_crtime;
+	/* Physical address of inode */
+	kernel_lb_addr		i_location;
+	__u64			i_unique;
+	__u32			i_lenEAttr;
+	__u32			i_lenAlloc;
+	__u64			i_lenExtents;
+	__u32			i_next_alloc_block;
+	__u32			i_next_alloc_goal;
+	unsigned		i_alloc_type : 3;
+	unsigned		i_efe : 1;
+	unsigned		i_use : 1;
+	unsigned		i_strat4096 : 1;
+	unsigned		reserved : 26;
+	union
+	{
+		short_ad	*i_sad;
+		long_ad		*i_lad;
+		__u8		*i_data;
+	} i_ext;
+	struct inode vfs_inode;
+};
+
+#endif
+
+/* exported IOCTLs, we have 'l', 0x40-0x7f */
+
+#define UDF_GETEASIZE   _IOR('l', 0x40, int)
+#define UDF_GETEABLOCK  _IOR('l', 0x41, void *)
+#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
+#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
+
+#endif /* _UDF_FS_I_H */
diff --git a/include/linux/udf_fs_sb.h b/include/linux/udf_fs_sb.h
new file mode 100644
index 000000000000..1966a6dbb4b6
--- /dev/null
+++ b/include/linux/udf_fs_sb.h
@@ -0,0 +1,122 @@
+/*
+ * udf_fs_sb.h
+ * 
+ * This include file is for the Linux kernel/module.
+ *
+ * CONTACTS
+ *	E-mail regarding any portion of the Linux UDF file system should be
+ *	directed to the development team mailing list (run by majordomo):
+ *		linux_udf@hpesjro.fc.hp.com
+ *
+ * COPYRIGHT
+ *	This file is distributed under the terms of the GNU General Public
+ *	License (GPL). Copies of the GPL can be obtained from:
+ *		ftp://prep.ai.mit.edu/pub/gnu/GPL
+ *	Each contributing author retains all rights to their own work.
+ */
+
+#ifndef _UDF_FS_SB_H
+#define _UDF_FS_SB_H 1
+
+#include <asm/semaphore.h>
+
+#pragma pack(1)
+
+#define UDF_MAX_BLOCK_LOADED	8
+
+#define UDF_TYPE1_MAP15			0x1511U
+#define UDF_VIRTUAL_MAP15		0x1512U
+#define UDF_VIRTUAL_MAP20		0x2012U
+#define UDF_SPARABLE_MAP15		0x1522U
+
+struct udf_sparing_data
+{
+	__u16	s_packet_len;
+	struct buffer_head *s_spar_map[4];
+};
+
+struct udf_virtual_data
+{
+	__u32	s_num_entries;
+	__u16	s_start_offset;
+};
+
+struct udf_bitmap
+{
+	__u32			s_extLength;
+	__u32			s_extPosition;
+	__u16			s_nr_groups;
+	struct buffer_head 	**s_block_bitmap;
+};
+
+struct udf_part_map
+{
+	union
+	{
+		struct udf_bitmap	*s_bitmap;
+		struct inode		*s_table;
+	} s_uspace;
+	union
+	{
+		struct udf_bitmap	*s_bitmap;
+		struct inode		*s_table;
+	} s_fspace;
+	__u32	s_partition_root;
+	__u32	s_partition_len;
+	__u16	s_partition_type;
+	__u16	s_partition_num;
+	union
+	{
+		struct udf_sparing_data s_sparing;
+		struct udf_virtual_data s_virtual;
+	} s_type_specific;
+	__u32	(*s_partition_func)(struct super_block *, __u32, __u16, __u32);
+	__u16	s_volumeseqnum;
+	__u16	s_partition_flags;
+};
+
+#pragma pack()
+
+struct udf_sb_info
+{
+	struct udf_part_map	*s_partmaps;
+	__u8			s_volident[32];
+
+	/* Overall info */
+	__u16			s_partitions;
+	__u16			s_partition;
+
+	/* Sector headers */
+	__s32			s_session;
+	__u32			s_anchor[4];
+	__u32			s_lastblock;
+
+	struct buffer_head	*s_lvidbh;
+
+	/* Default permissions */
+	mode_t			s_umask;
+	gid_t			s_gid;
+	uid_t			s_uid;
+
+	/* Root Info */
+	struct timespec		s_recordtime;
+
+	/* Fileset Info */
+	__u16			s_serialnum;
+
+	/* highest UDF revision we have recorded to this media */
+	__u16			s_udfrev;
+
+	/* Miscellaneous flags */
+	__u32			s_flags;
+
+	/* Encoding info */
+	struct nls_table	*s_nls_map;
+
+	/* VAT inode */
+	struct inode		*s_vat;
+
+	struct semaphore	s_alloc_sem;
+};
+
+#endif /* _UDF_FS_SB_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
new file mode 100644
index 000000000000..b60e0b4a25c4
--- /dev/null
+++ b/include/linux/udp.h
@@ -0,0 +1,63 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP protocol.
+ *
+ * Version:	@(#)udp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_UDP_H
+#define _LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+	__u16	source;
+	__u16	dest;
+	__u16	len;
+	__u16	check;
+};
+
+/* UDP socket options */
+#define UDP_CORK	1	/* Never send partially complete segments */
+#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <net/sock.h>
+#include <linux/ip.h>
+
+struct udp_sock {
+	/* inet_sock has to be the first member */
+	struct inet_sock inet;
+	int		 pending;	/* Any pending frames ? */
+	unsigned int	 corkflag;	/* Cork is required */
+  	__u16		 encap_type;	/* Is this an Encapsulation socket? */
+	/*
+	 * Following member retains the infomation to create a UDP header
+	 * when the socket is uncorked.
+	 */
+	__u16		 len;		/* total length of pending frames */
+};
+
+static inline struct udp_sock *udp_sk(const struct sock *sk)
+{
+	return (struct udp_sock *)sk;
+}
+
+#endif
+
+#endif	/* _LINUX_UDP_H */
diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h
new file mode 100644
index 000000000000..7a6babeca256
--- /dev/null
+++ b/include/linux/ufs_fs.h
@@ -0,0 +1,943 @@
+/*
+ *  linux/include/linux/ufs_fs.h
+ *
+ * Copyright (C) 1996
+ * Adrian Rodriguez (adrian@franklins-tower.rutgers.edu)
+ * Laboratory for Computer Science Research Computing Facility
+ * Rutgers, The State University of New Jersey
+ *
+ * Clean swab support by Fare <fare@tunes.org>
+ * just hope no one is using NNUUXXI on __?64 structure elements
+ * 64-bit clean thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+ *
+ * 4.4BSD (FreeBSD) support added on February 1st 1998 by
+ * Niels Kristian Bech Jensen <nkbj@image.dk> partially based
+ * on code by Martin von Loewis <martin@mira.isdn.cs.tu-berlin.de>.
+ *
+ * NeXTstep support added on February 5th 1998 by
+ * Niels Kristian Bech Jensen <nkbj@image.dk>.
+ *
+ * Write support by Daniel Pirkl <daniel.pirkl@email.cz>
+ *
+ * HP/UX hfs filesystem support added by
+ * Martin K. Petersen <mkp@mkp.net>, August 1999
+ *
+ * UFS2 (of FreeBSD 5.x) support added by
+ * Niraj Kumar <niraj17@iitbombay.org>  , Jan 2004
+ *
+ */
+
+#ifndef __LINUX_UFS_FS_H
+#define __LINUX_UFS_FS_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/stat.h>
+#include <linux/fs.h>
+
+#ifndef __KERNEL__
+typedef __u64 __fs64;
+typedef __u32 __fs32;
+typedef __u16 __fs16;
+#else
+typedef __u64 __bitwise __fs64;
+typedef __u32 __bitwise __fs32;
+typedef __u16 __bitwise __fs16;
+#endif
+
+#include <linux/ufs_fs_i.h>
+#include <linux/ufs_fs_sb.h>
+
+#define UFS_BBLOCK 0
+#define UFS_BBSIZE 8192
+#define UFS_SBLOCK 8192
+#define UFS_SBSIZE 8192
+
+#define UFS_SECTOR_SIZE 512
+#define UFS_SECTOR_BITS 9
+#define UFS_MAGIC  0x00011954
+#define UFS2_MAGIC 0x19540119
+#define UFS_CIGAM  0x54190100 /* byteswapped MAGIC */
+
+/* Copied from FreeBSD */
+/*
+ * Each disk drive contains some number of filesystems.
+ * A filesystem consists of a number of cylinder groups.
+ * Each cylinder group has inodes and data.
+ *
+ * A filesystem is described by its super-block, which in turn
+ * describes the cylinder groups.  The super-block is critical
+ * data and is replicated in each cylinder group to protect against
+ * catastrophic loss.  This is done at `newfs' time and the critical
+ * super-block data does not change, so the copies need not be
+ * referenced further unless disaster strikes.
+ *
+ * For filesystem fs, the offsets of the various blocks of interest
+ * are given in the super block as:
+ *      [fs->fs_sblkno]         Super-block
+ *      [fs->fs_cblkno]         Cylinder group block
+ *      [fs->fs_iblkno]         Inode blocks
+ *      [fs->fs_dblkno]         Data blocks
+ * The beginning of cylinder group cg in fs, is given by
+ * the ``cgbase(fs, cg)'' macro.
+ *
+ * Depending on the architecture and the media, the superblock may
+ * reside in any one of four places. For tiny media where every block
+ * counts, it is placed at the very front of the partition. Historically,
+ * UFS1 placed it 8K from the front to leave room for the disk label and
+ * a small bootstrap. For UFS2 it got moved to 64K from the front to leave
+ * room for the disk label and a bigger bootstrap, and for really piggy
+ * systems we check at 256K from the front if the first three fail. In
+ * all cases the size of the superblock will be SBLOCKSIZE. All values are
+ * given in byte-offset form, so they do not imply a sector size. The
+ * SBLOCKSEARCH specifies the order in which the locations should be searched.
+ */
+#define SBLOCK_FLOPPY        0
+#define SBLOCK_UFS1       8192
+#define SBLOCK_UFS2      65536
+#define SBLOCK_PIGGY    262144
+#define SBLOCKSIZE        8192
+#define SBLOCKSEARCH \
+        { SBLOCK_UFS2, SBLOCK_UFS1, SBLOCK_FLOPPY, SBLOCK_PIGGY, -1 }
+
+
+/* HP specific MAGIC values */
+
+#define UFS_MAGIC_LFN   0x00095014 /* fs supports filenames > 14 chars */
+#define UFS_CIGAM_LFN   0x14500900 /* srahc 41 < semanelif stroppus sf */
+
+#define UFS_MAGIC_SEC   0x00612195 /* B1 security fs */
+#define UFS_CIGAM_SEC   0x95216100
+
+#define UFS_MAGIC_FEA   0x00195612 /* fs_featurebits supported */
+#define UFS_CIGAM_FEA   0x12561900
+
+#define UFS_MAGIC_4GB   0x05231994 /* fs > 4 GB && fs_featurebits */
+#define UFS_CIGAM_4GB   0x94192305
+
+/* Seems somebody at HP goofed here. B1 and lfs are both 0x2 !?! */
+#define UFS_FSF_LFN     0x00000001 /* long file names */
+#define UFS_FSF_B1      0x00000002 /* B1 security */
+#define UFS_FSF_LFS     0x00000002 /* large files */
+#define UFS_FSF_LUID    0x00000004 /* large UIDs */
+
+/* End of HP stuff */
+
+
+#define UFS_BSIZE	8192
+#define UFS_MINBSIZE	4096
+#define UFS_FSIZE	1024
+#define UFS_MAXFRAG	(UFS_BSIZE / UFS_FSIZE)
+
+#define UFS_NDADDR 12
+#define UFS_NINDIR 3
+
+#define UFS_IND_BLOCK	(UFS_NDADDR + 0)
+#define UFS_DIND_BLOCK	(UFS_NDADDR + 1)
+#define UFS_TIND_BLOCK	(UFS_NDADDR + 2)
+
+#define UFS_NDIR_FRAGMENT (UFS_NDADDR << uspi->s_fpbshift)
+#define UFS_IND_FRAGMENT (UFS_IND_BLOCK << uspi->s_fpbshift)
+#define UFS_DIND_FRAGMENT (UFS_DIND_BLOCK << uspi->s_fpbshift)
+#define UFS_TIND_FRAGMENT (UFS_TIND_BLOCK << uspi->s_fpbshift)
+
+#define UFS_ROOTINO 2
+#define UFS_FIRST_INO (UFS_ROOTINO + 1)
+
+#define UFS_USEEFT  ((__u16)65535)
+
+#define UFS_FSOK      0x7c269d38
+#define UFS_FSACTIVE  ((char)0x00)
+#define UFS_FSCLEAN   ((char)0x01)
+#define UFS_FSSTABLE  ((char)0x02)
+#define UFS_FSOSF1    ((char)0x03)	/* is this correct for DEC OSF/1? */
+#define UFS_FSBAD     ((char)0xff)
+
+/* From here to next blank line, s_flags for ufs_sb_info */
+/* directory entry encoding */
+#define UFS_DE_MASK		0x00000010	/* mask for the following */
+#define UFS_DE_OLD		0x00000000
+#define UFS_DE_44BSD		0x00000010
+/* uid encoding */
+#define UFS_UID_MASK		0x00000060	/* mask for the following */
+#define UFS_UID_OLD		0x00000000
+#define UFS_UID_44BSD		0x00000020
+#define UFS_UID_EFT		0x00000040
+/* superblock state encoding */
+#define UFS_ST_MASK		0x00000700	/* mask for the following */
+#define UFS_ST_OLD		0x00000000
+#define UFS_ST_44BSD		0x00000100
+#define UFS_ST_SUN		0x00000200
+#define UFS_ST_SUNx86		0x00000400
+/*cylinder group encoding */
+#define UFS_CG_MASK		0x00003000	/* mask for the following */
+#define UFS_CG_OLD		0x00000000
+#define UFS_CG_44BSD		0x00002000
+#define UFS_CG_SUN		0x00001000
+/* filesystem type encoding */
+#define UFS_TYPE_MASK		0x00010000	/* mask for the following */
+#define UFS_TYPE_UFS1		0x00000000
+#define UFS_TYPE_UFS2		0x00010000
+
+
+/* fs_inodefmt options */
+#define UFS_42INODEFMT	-1
+#define UFS_44INODEFMT	2
+
+/* mount options */
+#define UFS_MOUNT_ONERROR		0x0000000F
+#define UFS_MOUNT_ONERROR_PANIC		0x00000001
+#define UFS_MOUNT_ONERROR_LOCK		0x00000002
+#define UFS_MOUNT_ONERROR_UMOUNT	0x00000004
+#define UFS_MOUNT_ONERROR_REPAIR	0x00000008
+
+#define UFS_MOUNT_UFSTYPE		0x0000FFF0
+#define UFS_MOUNT_UFSTYPE_OLD		0x00000010
+#define UFS_MOUNT_UFSTYPE_44BSD		0x00000020
+#define UFS_MOUNT_UFSTYPE_SUN		0x00000040
+#define UFS_MOUNT_UFSTYPE_NEXTSTEP	0x00000080
+#define UFS_MOUNT_UFSTYPE_NEXTSTEP_CD	0x00000100
+#define UFS_MOUNT_UFSTYPE_OPENSTEP	0x00000200
+#define UFS_MOUNT_UFSTYPE_SUNx86	0x00000400
+#define UFS_MOUNT_UFSTYPE_HP	        0x00000800
+#define UFS_MOUNT_UFSTYPE_UFS2		0x00001000
+
+#define ufs_clear_opt(o,opt)	o &= ~UFS_MOUNT_##opt
+#define ufs_set_opt(o,opt)	o |= UFS_MOUNT_##opt
+#define ufs_test_opt(o,opt)	((o) & UFS_MOUNT_##opt)
+
+/*
+ * MINFREE gives the minimum acceptable percentage of file system
+ * blocks which may be free. If the freelist drops below this level
+ * only the superuser may continue to allocate blocks. This may
+ * be set to 0 if no reserve of free blocks is deemed necessary,
+ * however throughput drops by fifty percent if the file system
+ * is run at between 95% and 100% full; thus the minimum default
+ * value of fs_minfree is 5%. However, to get good clustering
+ * performance, 10% is a better choice. hence we use 10% as our
+ * default value. With 10% free space, fragmentation is not a
+ * problem, so we choose to optimize for time.
+ */
+#define UFS_MINFREE         5
+#define UFS_DEFAULTOPT      UFS_OPTTIME
+            
+/*
+ * Turn file system block numbers into disk block addresses.
+ * This maps file system blocks to device size blocks.
+ */
+#define ufs_fsbtodb(uspi, b)	((b) << (uspi)->s_fsbtodb)
+#define	ufs_dbtofsb(uspi, b)	((b) >> (uspi)->s_fsbtodb)
+
+/*
+ * Cylinder group macros to locate things in cylinder groups.
+ * They calc file system addresses of cylinder group data structures.
+ */
+#define	ufs_cgbase(c)	(uspi->s_fpg * (c))
+#define ufs_cgstart(c)	((uspi)->fs_magic == UFS2_MAGIC ?  ufs_cgbase(c) : \
+	(ufs_cgbase(c)  + uspi->s_cgoffset * ((c) & ~uspi->s_cgmask)))
+#define	ufs_cgsblock(c)	(ufs_cgstart(c) + uspi->s_sblkno)	/* super blk */
+#define	ufs_cgcmin(c)	(ufs_cgstart(c) + uspi->s_cblkno)	/* cg block */
+#define	ufs_cgimin(c)	(ufs_cgstart(c) + uspi->s_iblkno)	/* inode blk */
+#define	ufs_cgdmin(c)	(ufs_cgstart(c) + uspi->s_dblkno)	/* 1st data */
+
+/*
+ * Macros for handling inode numbers:
+ *     inode number to file system block offset.
+ *     inode number to cylinder group number.
+ *     inode number to file system block address.
+ */
+#define	ufs_inotocg(x)		((x) / uspi->s_ipg)
+#define	ufs_inotocgoff(x)	((x) % uspi->s_ipg)
+#define	ufs_inotofsba(x)	(ufs_cgimin(ufs_inotocg(x)) + ufs_inotocgoff(x) / uspi->s_inopf)
+#define	ufs_inotofsbo(x)	((x) % uspi->s_inopf)
+
+/*
+ * Give cylinder group number for a file system block.
+ * Give cylinder group block number for a file system block.
+ */
+#define	ufs_dtog(d)	((d) / uspi->s_fpg)
+#define	ufs_dtogd(d)	((d) % uspi->s_fpg)
+
+/*
+ * Compute the cylinder and rotational position of a cyl block addr.
+ */
+#define ufs_cbtocylno(bno) \
+	((bno) * uspi->s_nspf / uspi->s_spc)
+#define ufs_cbtorpos(bno) \
+	((((bno) * uspi->s_nspf % uspi->s_spc / uspi->s_nsect \
+	* uspi->s_trackskew + (bno) * uspi->s_nspf % uspi->s_spc \
+	% uspi->s_nsect * uspi->s_interleave) % uspi->s_nsect \
+	* uspi->s_nrpos) / uspi->s_npsect)
+
+/*
+ * The following macros optimize certain frequently calculated
+ * quantities by using shifts and masks in place of divisions
+ * modulos and multiplications.
+ */
+#define ufs_blkoff(loc)		((loc) & uspi->s_qbmask)
+#define ufs_fragoff(loc)	((loc) & uspi->s_qfmask)
+#define ufs_lblktosize(blk)	((blk) << uspi->s_bshift)
+#define ufs_lblkno(loc)		((loc) >> uspi->s_bshift)
+#define ufs_numfrags(loc)	((loc) >> uspi->s_fshift)
+#define ufs_blkroundup(size)	(((size) + uspi->s_qbmask) & uspi->s_bmask)
+#define ufs_fragroundup(size)	(((size) + uspi->s_qfmask) & uspi->s_fmask)
+#define ufs_fragstoblks(frags)	((frags) >> uspi->s_fpbshift)
+#define ufs_blkstofrags(blks)	((blks) << uspi->s_fpbshift)
+#define ufs_fragnum(fsb)	((fsb) & uspi->s_fpbmask)
+#define ufs_blknum(fsb)		((fsb) & ~uspi->s_fpbmask)
+
+#define	UFS_MAXNAMLEN 255
+#define UFS_MAXMNTLEN 512
+#define UFS2_MAXMNTLEN 468
+#define UFS2_MAXVOLLEN 32
+/* #define UFS_MAXCSBUFS 31 */
+#define UFS_LINK_MAX 32000
+/*
+#define	UFS2_NOCSPTRS	((128 / sizeof(void *)) - 4)
+*/
+#define	UFS2_NOCSPTRS	28
+
+/*
+ * UFS_DIR_PAD defines the directory entries boundaries
+ * (must be a multiple of 4)
+ */
+#define UFS_DIR_PAD			4
+#define UFS_DIR_ROUND			(UFS_DIR_PAD - 1)
+#define UFS_DIR_REC_LEN(name_len)	(((name_len) + 1 + 8 + UFS_DIR_ROUND) & ~UFS_DIR_ROUND)
+
+struct ufs_timeval {
+	__fs32	tv_sec;
+	__fs32	tv_usec;
+};
+
+struct ufs_dir_entry {
+	__fs32  d_ino;			/* inode number of this entry */
+	__fs16  d_reclen;		/* length of this entry */
+	union {
+		__fs16	d_namlen;		/* actual length of d_name */
+		struct {
+			__u8	d_type;		/* file type */
+			__u8	d_namlen;	/* length of string in d_name */
+		} d_44;
+	} d_u;
+	__u8	d_name[UFS_MAXNAMLEN + 1];	/* file name */
+};
+
+struct ufs_csum {
+	__fs32	cs_ndir;	/* number of directories */
+	__fs32	cs_nbfree;	/* number of free blocks */
+	__fs32	cs_nifree;	/* number of free inodes */
+	__fs32	cs_nffree;	/* number of free frags */
+};
+struct ufs2_csum_total {
+	__fs64	cs_ndir;	/* number of directories */
+	__fs64	cs_nbfree;	/* number of free blocks */
+	__fs64	cs_nifree;	/* number of free inodes */
+	__fs64	cs_nffree;	/* number of free frags */
+	__fs64   cs_numclusters;	/* number of free clusters */
+	__fs64   cs_spare[3];	/* future expansion */
+};
+
+/*
+ * This is the actual superblock, as it is laid out on the disk.
+ */
+struct ufs_super_block {
+	__fs32	fs_link;	/* UNUSED */
+	__fs32	fs_rlink;	/* UNUSED */
+	__fs32	fs_sblkno;	/* addr of super-block in filesys */
+	__fs32	fs_cblkno;	/* offset of cyl-block in filesys */
+	__fs32	fs_iblkno;	/* offset of inode-blocks in filesys */
+	__fs32	fs_dblkno;	/* offset of first data after cg */
+	__fs32	fs_cgoffset;	/* cylinder group offset in cylinder */
+	__fs32	fs_cgmask;	/* used to calc mod fs_ntrak */
+	__fs32	fs_time;	/* last time written -- time_t */
+	__fs32	fs_size;	/* number of blocks in fs */
+	__fs32	fs_dsize;	/* number of data blocks in fs */
+	__fs32	fs_ncg;		/* number of cylinder groups */
+	__fs32	fs_bsize;	/* size of basic blocks in fs */
+	__fs32	fs_fsize;	/* size of frag blocks in fs */
+	__fs32	fs_frag;	/* number of frags in a block in fs */
+/* these are configuration parameters */
+	__fs32	fs_minfree;	/* minimum percentage of free blocks */
+	__fs32	fs_rotdelay;	/* num of ms for optimal next block */
+	__fs32	fs_rps;		/* disk revolutions per second */
+/* these fields can be computed from the others */
+	__fs32	fs_bmask;	/* ``blkoff'' calc of blk offsets */
+	__fs32	fs_fmask;	/* ``fragoff'' calc of frag offsets */
+	__fs32	fs_bshift;	/* ``lblkno'' calc of logical blkno */
+	__fs32	fs_fshift;	/* ``numfrags'' calc number of frags */
+/* these are configuration parameters */
+	__fs32	fs_maxcontig;	/* max number of contiguous blks */
+	__fs32	fs_maxbpg;	/* max number of blks per cyl group */
+/* these fields can be computed from the others */
+	__fs32	fs_fragshift;	/* block to frag shift */
+	__fs32	fs_fsbtodb;	/* fsbtodb and dbtofsb shift constant */
+	__fs32	fs_sbsize;	/* actual size of super block */
+	__fs32	fs_csmask;	/* csum block offset */
+	__fs32	fs_csshift;	/* csum block number */
+	__fs32	fs_nindir;	/* value of NINDIR */
+	__fs32	fs_inopb;	/* value of INOPB */
+	__fs32	fs_nspf;	/* value of NSPF */
+/* yet another configuration parameter */
+	__fs32	fs_optim;	/* optimization preference, see below */
+/* these fields are derived from the hardware */
+	union {
+		struct {
+			__fs32	fs_npsect;	/* # sectors/track including spares */
+		} fs_sun;
+		struct {
+			__fs32	fs_state;	/* file system state time stamp */
+		} fs_sunx86;
+	} fs_u1;
+	__fs32	fs_interleave;	/* hardware sector interleave */
+	__fs32	fs_trackskew;	/* sector 0 skew, per track */
+/* a unique id for this filesystem (currently unused and unmaintained) */
+/* In 4.3 Tahoe this space is used by fs_headswitch and fs_trkseek */
+/* Neither of those fields is used in the Tahoe code right now but */
+/* there could be problems if they are.                            */
+	__fs32	fs_id[2];	/* file system id */
+/* sizes determined by number of cylinder groups and their sizes */
+	__fs32	fs_csaddr;	/* blk addr of cyl grp summary area */
+	__fs32	fs_cssize;	/* size of cyl grp summary area */
+	__fs32	fs_cgsize;	/* cylinder group size */
+/* these fields are derived from the hardware */
+	__fs32	fs_ntrak;	/* tracks per cylinder */
+	__fs32	fs_nsect;	/* sectors per track */
+	__fs32	fs_spc;		/* sectors per cylinder */
+/* this comes from the disk driver partitioning */
+	__fs32	fs_ncyl;	/* cylinders in file system */
+/* these fields can be computed from the others */
+	__fs32	fs_cpg;		/* cylinders per group */
+	__fs32	fs_ipg;		/* inodes per cylinder group */
+	__fs32	fs_fpg;		/* blocks per group * fs_frag */
+/* this data must be re-computed after crashes */
+	struct ufs_csum fs_cstotal;	/* cylinder summary information */
+/* these fields are cleared at mount time */
+	__s8	fs_fmod;	/* super block modified flag */
+	__s8	fs_clean;	/* file system is clean flag */
+	__s8	fs_ronly;	/* mounted read-only flag */
+	__s8	fs_flags;	/* currently unused flag */
+	union {
+		struct {
+			__s8	fs_fsmnt[UFS_MAXMNTLEN];/* name mounted on */
+			__fs32	fs_cgrotor;	/* last cg searched */
+			__fs32	fs_csp[UFS_MAXCSBUFS];/*list of fs_cs info buffers */
+			__fs32	fs_maxcluster;
+			__fs32	fs_cpc;		/* cyl per cycle in postbl */
+			__fs16	fs_opostbl[16][8]; /* old rotation block list head */
+		} fs_u1;
+		struct {
+			__s8  fs_fsmnt[UFS2_MAXMNTLEN];	/* name mounted on */
+			__u8   fs_volname[UFS2_MAXVOLLEN]; /* volume name */
+			__fs64  fs_swuid;		/* system-wide uid */
+			__fs32  fs_pad;	/* due to alignment of fs_swuid */
+			__fs32   fs_cgrotor;     /* last cg searched */
+			__fs32   fs_ocsp[UFS2_NOCSPTRS]; /*list of fs_cs info buffers */
+			__fs32   fs_contigdirs;/*# of contiguously allocated dirs */
+			__fs32   fs_csp;	/* cg summary info buffer for fs_cs */
+			__fs32   fs_maxcluster;
+			__fs32   fs_active;/* used by snapshots to track fs */
+			__fs32   fs_old_cpc;	/* cyl per cycle in postbl */
+			__fs32   fs_maxbsize;/*maximum blocking factor permitted */
+			__fs64   fs_sparecon64[17];/*old rotation block list head */
+			__fs64   fs_sblockloc; /* byte offset of standard superblock */
+			struct  ufs2_csum_total fs_cstotal;/*cylinder summary information*/
+			struct  ufs_timeval    fs_time;		/* last time written */
+			__fs64    fs_size;		/* number of blocks in fs */
+			__fs64    fs_dsize;	/* number of data blocks in fs */
+			__fs64   fs_csaddr;	/* blk addr of cyl grp summary area */
+			__fs64    fs_pendingblocks;/* blocks in process of being freed */
+			__fs32    fs_pendinginodes;/*inodes in process of being freed */
+		} fs_u2;
+	}  fs_u11;
+	union {
+		struct {
+			__fs32	fs_sparecon[53];/* reserved for future constants */
+			__fs32	fs_reclaim;
+			__fs32	fs_sparecon2[1];
+			__fs32	fs_state;	/* file system state time stamp */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+		} fs_sun;
+		struct {
+			__fs32	fs_sparecon[53];/* reserved for future constants */
+			__fs32	fs_reclaim;
+			__fs32	fs_sparecon2[1];
+			__fs32	fs_npsect;	/* # sectors/track including spares */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+		} fs_sunx86;
+		struct {
+			__fs32	fs_sparecon[50];/* reserved for future constants */
+			__fs32	fs_contigsumsize;/* size of cluster summary array */
+			__fs32	fs_maxsymlinklen;/* max length of an internal symlink */
+			__fs32	fs_inodefmt;	/* format of on-disk inodes */
+			__fs32	fs_maxfilesize[2];	/* max representable file size */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+			__fs32	fs_state;	/* file system state time stamp */
+		} fs_44;
+	} fs_u2;
+	__fs32	fs_postblformat;	/* format of positional layout tables */
+	__fs32	fs_nrpos;		/* number of rotational positions */
+	__fs32	fs_postbloff;		/* (__s16) rotation block list head */
+	__fs32	fs_rotbloff;		/* (__u8) blocks for each rotation */
+	__fs32	fs_magic;		/* magic number */
+	__u8	fs_space[1];		/* list of blocks for each rotation */
+};
+
+/*
+ * Preference for optimization.
+ */
+#define UFS_OPTTIME	0	/* minimize allocation time */
+#define UFS_OPTSPACE	1	/* minimize disk fragmentation */
+
+/*
+ * Rotational layout table format types
+ */
+#define UFS_42POSTBLFMT		-1	/* 4.2BSD rotational table format */
+#define UFS_DYNAMICPOSTBLFMT	1	/* dynamic rotational table format */
+
+/*
+ * Convert cylinder group to base address of its global summary info.
+ */
+#define fs_cs(indx) \
+	s_csp[(indx) >> uspi->s_csshift][(indx) & ~uspi->s_csmask]
+
+/*
+ * Cylinder group block for a file system.
+ *
+ * Writable fields in the cylinder group are protected by the associated
+ * super block lock fs->fs_lock.
+ */
+#define	CG_MAGIC	0x090255
+#define ufs_cg_chkmagic(sb, ucg) \
+	(fs32_to_cpu((sb), (ucg)->cg_magic) == CG_MAGIC)
+
+/*
+ * size of this structure is 172 B
+ */
+struct	ufs_cylinder_group {
+	__fs32	cg_link;		/* linked list of cyl groups */
+	__fs32	cg_magic;		/* magic number */
+	__fs32	cg_time;		/* time last written */
+	__fs32	cg_cgx;			/* we are the cgx'th cylinder group */
+	__fs16	cg_ncyl;		/* number of cyl's this cg */
+	__fs16	cg_niblk;		/* number of inode blocks this cg */
+	__fs32	cg_ndblk;		/* number of data blocks this cg */
+	struct	ufs_csum cg_cs;		/* cylinder summary information */
+	__fs32	cg_rotor;		/* position of last used block */
+	__fs32	cg_frotor;		/* position of last used frag */
+	__fs32	cg_irotor;		/* position of last used inode */
+	__fs32	cg_frsum[UFS_MAXFRAG];	/* counts of available frags */
+	__fs32	cg_btotoff;		/* (__u32) block totals per cylinder */
+	__fs32	cg_boff;		/* (short) free block positions */
+	__fs32	cg_iusedoff;		/* (char) used inode map */
+	__fs32	cg_freeoff;		/* (u_char) free block map */
+	__fs32	cg_nextfreeoff;		/* (u_char) next available space */
+	union {
+		struct {
+			__fs32	cg_clustersumoff;	/* (u_int32) counts of avail clusters */
+			__fs32	cg_clusteroff;		/* (u_int8) free cluster map */
+			__fs32	cg_nclusterblks;	/* number of clusters this cg */
+			__fs32	cg_sparecon[13];	/* reserved for future use */
+		} cg_44;
+		struct {
+			__fs32	cg_clustersumoff;/* (u_int32) counts of avail clusters */
+			__fs32	cg_clusteroff;	/* (u_int8) free cluster map */
+			__fs32	cg_nclusterblks;/* number of clusters this cg */
+			__fs32   cg_niblk; /* number of inode blocks this cg */
+			__fs32   cg_initediblk;	/* last initialized inode */
+			__fs32   cg_sparecon32[3];/* reserved for future use */
+			__fs64   cg_time;	/* time last written */
+			__fs64	cg_sparecon[3];	/* reserved for future use */
+		} cg_u2;
+		__fs32	cg_sparecon[16];	/* reserved for future use */
+	} cg_u;
+	__u8	cg_space[1];		/* space for cylinder group maps */
+/* actually longer */
+};
+
+/*
+ * structure of an on-disk inode
+ */
+struct ufs_inode {
+	__fs16	ui_mode;		/*  0x0 */
+	__fs16	ui_nlink;		/*  0x2 */
+	union {
+		struct {
+			__fs16	ui_suid;	/*  0x4 */
+			__fs16	ui_sgid;	/*  0x6 */
+		} oldids;
+		__fs32	ui_inumber;		/*  0x4 lsf: inode number */
+		__fs32	ui_author;		/*  0x4 GNU HURD: author */
+	} ui_u1;
+	__fs64	ui_size;		/*  0x8 */
+	struct ufs_timeval ui_atime;	/* 0x10 access */
+	struct ufs_timeval ui_mtime;	/* 0x18 modification */
+	struct ufs_timeval ui_ctime;	/* 0x20 creation */
+	union {
+		struct {
+			__fs32	ui_db[UFS_NDADDR];/* 0x28 data blocks */
+			__fs32	ui_ib[UFS_NINDIR];/* 0x58 indirect blocks */
+		} ui_addr;
+		__u8	ui_symlink[4*(UFS_NDADDR+UFS_NINDIR)];/* 0x28 fast symlink */
+	} ui_u2;
+	__fs32	ui_flags;		/* 0x64 immutable, append-only... */
+	__fs32	ui_blocks;		/* 0x68 blocks in use */
+	__fs32	ui_gen;			/* 0x6c like ext2 i_version, for NFS support */
+	union {
+		struct {
+			__fs32	ui_shadow;	/* 0x70 shadow inode with security data */
+			__fs32	ui_uid;		/* 0x74 long EFT version of uid */
+			__fs32	ui_gid;		/* 0x78 long EFT version of gid */
+			__fs32	ui_oeftflag;	/* 0x7c reserved */
+		} ui_sun;
+		struct {
+			__fs32	ui_uid;		/* 0x70 File owner */
+			__fs32	ui_gid;		/* 0x74 File group */
+			__fs32	ui_spare[2];	/* 0x78 reserved */
+		} ui_44;
+		struct {
+			__fs32	ui_uid;		/* 0x70 */
+			__fs32	ui_gid;		/* 0x74 */
+			__fs16	ui_modeh;	/* 0x78 mode high bits */
+			__fs16	ui_spare;	/* 0x7A unused */
+			__fs32	ui_trans;	/* 0x7c filesystem translator */
+		} ui_hurd;
+	} ui_u3;
+};
+
+#define UFS_NXADDR  2            /* External addresses in inode. */
+struct ufs2_inode {
+	__fs16     ui_mode;        /*   0: IFMT, permissions; see below. */
+	__fs16     ui_nlink;       /*   2: File link count. */
+	__fs32     ui_uid;         /*   4: File owner. */
+	__fs32     ui_gid;         /*   8: File group. */
+	__fs32     ui_blksize;     /*  12: Inode blocksize. */
+	__fs64     ui_size;        /*  16: File byte count. */
+	__fs64     ui_blocks;      /*  24: Bytes actually held. */
+	struct ufs_timeval   ui_atime;       /*  32: Last access time. */
+	struct ufs_timeval   ui_mtime;       /*  40: Last modified time. */
+	struct ufs_timeval   ui_ctime;       /*  48: Last inode change time. */
+	struct ufs_timeval   ui_birthtime;   /*  56: Inode creation time. */
+	__fs32     ui_mtimensec;   /*  64: Last modified time. */
+	__fs32     ui_atimensec;   /*  68: Last access time. */
+	__fs32     ui_ctimensec;   /*  72: Last inode change time. */
+	__fs32     ui_birthnsec;   /*  76: Inode creation time. */
+	__fs32     ui_gen;         /*  80: Generation number. */
+	__fs32     ui_kernflags;   /*  84: Kernel flags. */
+	__fs32     ui_flags;       /*  88: Status flags (chflags). */
+	__fs32     ui_extsize;     /*  92: External attributes block. */
+	__fs64     ui_extb[UFS_NXADDR];/*  96: External attributes block. */
+	union {
+		struct {
+			__fs64     ui_db[UFS_NDADDR]; /* 112: Direct disk blocks. */
+			__fs64     ui_ib[UFS_NINDIR];/* 208: Indirect disk blocks.*/
+		} ui_addr;
+	__u8	ui_symlink[2*4*(UFS_NDADDR+UFS_NINDIR)];/* 0x28 fast symlink */
+	} ui_u2;
+	__fs64     ui_spare[3];    /* 232: Reserved; currently unused */
+};
+
+
+/* FreeBSD has these in sys/stat.h */
+/* ui_flags that can be set by a file owner */
+#define UFS_UF_SETTABLE   0x0000ffff
+#define UFS_UF_NODUMP     0x00000001  /* do not dump */
+#define UFS_UF_IMMUTABLE  0x00000002  /* immutable (can't "change") */
+#define UFS_UF_APPEND     0x00000004  /* append-only */
+#define UFS_UF_OPAQUE     0x00000008  /* directory is opaque (unionfs) */
+#define UFS_UF_NOUNLINK   0x00000010  /* can't be removed or renamed */
+/* ui_flags that only root can set */
+#define UFS_SF_SETTABLE   0xffff0000
+#define UFS_SF_ARCHIVED   0x00010000  /* archived */
+#define UFS_SF_IMMUTABLE  0x00020000  /* immutable (can't "change") */
+#define UFS_SF_APPEND     0x00040000  /* append-only */
+#define UFS_SF_NOUNLINK   0x00100000  /* can't be removed or renamed */
+
+/*
+ * This structure is used for reading disk structures larger
+ * than the size of fragment.
+ */
+struct ufs_buffer_head {
+	__u64 fragment;			/* first fragment */
+	__u64 count;				/* number of fragments */
+	struct buffer_head * bh[UFS_MAXFRAG];	/* buffers */
+};
+
+struct ufs_cg_private_info {
+	struct ufs_cylinder_group ucg;
+	__u32	c_cgx;		/* number of cylidner group */
+	__u16	c_ncyl;		/* number of cyl's this cg */
+	__u16	c_niblk;	/* number of inode blocks this cg */
+	__u32	c_ndblk;	/* number of data blocks this cg */
+	__u32	c_rotor;	/* position of last used block */
+	__u32	c_frotor;	/* position of last used frag */
+	__u32	c_irotor;	/* position of last used inode */
+	__u32	c_btotoff;	/* (__u32) block totals per cylinder */
+	__u32	c_boff;		/* (short) free block positions */
+	__u32	c_iusedoff;	/* (char) used inode map */
+	__u32	c_freeoff;	/* (u_char) free block map */
+	__u32	c_nextfreeoff;	/* (u_char) next available space */
+	__u32	c_clustersumoff;/* (u_int32) counts of avail clusters */
+	__u32	c_clusteroff;	/* (u_int8) free cluster map */
+	__u32	c_nclusterblks;	/* number of clusters this cg */
+};	
+
+struct ufs_sb_private_info {
+	struct ufs_buffer_head s_ubh; /* buffer containing super block */
+	__u32	s_sblkno;	/* offset of super-blocks in filesys */
+	__u32	s_cblkno;	/* offset of cg-block in filesys */
+	__u32	s_iblkno;	/* offset of inode-blocks in filesys */
+	__u32	s_dblkno;	/* offset of first data after cg */
+	__u32	s_cgoffset;	/* cylinder group offset in cylinder */
+	__u32	s_cgmask;	/* used to calc mod fs_ntrak */
+	__u32	s_size;		/* number of blocks (fragments) in fs */
+	__u32	s_dsize;	/* number of data blocks in fs */
+	__u64	s_u2_size;	/* ufs2: number of blocks (fragments) in fs */
+	__u64	s_u2_dsize;	/*ufs2:  number of data blocks in fs */
+	__u32	s_ncg;		/* number of cylinder groups */
+	__u32	s_bsize;	/* size of basic blocks */
+	__u32	s_fsize;	/* size of fragments */
+	__u32	s_fpb;		/* fragments per block */
+	__u32	s_minfree;	/* minimum percentage of free blocks */
+	__u32	s_bmask;	/* `blkoff'' calc of blk offsets */
+	__u32	s_fmask;	/* s_fsize mask */
+	__u32	s_bshift;	/* `lblkno'' calc of logical blkno */
+	__u32   s_fshift;	/* s_fsize shift */
+	__u32	s_fpbshift;	/* fragments per block shift */
+	__u32	s_fsbtodb;	/* fsbtodb and dbtofsb shift constant */
+	__u32	s_sbsize;	/* actual size of super block */
+	__u32   s_csmask;	/* csum block offset */
+	__u32	s_csshift;	/* csum block number */
+	__u32	s_nindir;	/* value of NINDIR */
+	__u32	s_inopb;	/* value of INOPB */
+	__u32	s_nspf;		/* value of NSPF */
+	__u32	s_npsect;	/* # sectors/track including spares */
+	__u32	s_interleave;	/* hardware sector interleave */
+	__u32	s_trackskew;	/* sector 0 skew, per track */
+	__u32	s_csaddr;	/* blk addr of cyl grp summary area */
+	__u32	s_cssize;	/* size of cyl grp summary area */
+	__u32	s_cgsize;	/* cylinder group size */
+	__u32	s_ntrak;	/* tracks per cylinder */
+	__u32	s_nsect;	/* sectors per track */
+	__u32	s_spc;		/* sectors per cylinder */
+	__u32	s_ipg;		/* inodes per cylinder group */
+	__u32	s_fpg;		/* fragments per group */
+	__u32	s_cpc;		/* cyl per cycle in postbl */
+	__s32	s_contigsumsize;/* size of cluster summary array, 44bsd */
+	__s64	s_qbmask;	/* ~usb_bmask */
+	__s64	s_qfmask;	/* ~usb_fmask */
+	__s32	s_postblformat;	/* format of positional layout tables */
+	__s32	s_nrpos;	/* number of rotational positions */
+        __s32	s_postbloff;	/* (__s16) rotation block list head */
+	__s32	s_rotbloff;	/* (__u8) blocks for each rotation */
+
+	__u32	s_fpbmask;	/* fragments per block mask */
+	__u32	s_apb;		/* address per block */
+	__u32	s_2apb;		/* address per block^2 */
+	__u32	s_3apb;		/* address per block^3 */
+	__u32	s_apbmask;	/* address per block mask */
+	__u32	s_apbshift;	/* address per block shift */
+	__u32	s_2apbshift;	/* address per block shift * 2 */
+	__u32	s_3apbshift;	/* address per block shift * 3 */
+	__u32	s_nspfshift;	/* number of sector per fragment shift */
+	__u32	s_nspb;		/* number of sector per block */
+	__u32	s_inopf;	/* inodes per fragment */
+	__u32	s_sbbase;	/* offset of NeXTstep superblock */
+	__u32	s_bpf;		/* bits per fragment */
+	__u32	s_bpfshift;	/* bits per fragment shift*/
+	__u32	s_bpfmask;	/* bits per fragment mask */
+
+	__u32	s_maxsymlinklen;/* upper limit on fast symlinks' size */
+	__s32	fs_magic;       /* filesystem magic */
+};
+
+/*
+ * Sizes of this structures are:
+ *	ufs_super_block_first	512
+ *	ufs_super_block_second	512
+ *	ufs_super_block_third	356
+ */
+struct ufs_super_block_first {
+	__fs32	fs_link;
+	__fs32	fs_rlink;
+	__fs32	fs_sblkno;
+	__fs32	fs_cblkno;
+	__fs32	fs_iblkno;
+	__fs32	fs_dblkno;
+	__fs32	fs_cgoffset;
+	__fs32	fs_cgmask;
+	__fs32	fs_time;
+	__fs32	fs_size;
+	__fs32	fs_dsize;
+	__fs32	fs_ncg;
+	__fs32	fs_bsize;
+	__fs32	fs_fsize;
+	__fs32	fs_frag;
+	__fs32	fs_minfree;
+	__fs32	fs_rotdelay;
+	__fs32	fs_rps;
+	__fs32	fs_bmask;
+	__fs32	fs_fmask;
+	__fs32	fs_bshift;
+	__fs32	fs_fshift;
+	__fs32	fs_maxcontig;
+	__fs32	fs_maxbpg;
+	__fs32	fs_fragshift;
+	__fs32	fs_fsbtodb;
+	__fs32	fs_sbsize;
+	__fs32	fs_csmask;
+	__fs32	fs_csshift;
+	__fs32	fs_nindir;
+	__fs32	fs_inopb;
+	__fs32	fs_nspf;
+	__fs32	fs_optim;
+	union {
+		struct {
+			__fs32	fs_npsect;
+		} fs_sun;
+		struct {
+			__fs32	fs_state;
+		} fs_sunx86;
+	} fs_u1;
+	__fs32	fs_interleave;
+	__fs32	fs_trackskew;
+	__fs32	fs_id[2];
+	__fs32	fs_csaddr;
+	__fs32	fs_cssize;
+	__fs32	fs_cgsize;
+	__fs32	fs_ntrak;
+	__fs32	fs_nsect;
+	__fs32	fs_spc;
+	__fs32	fs_ncyl;
+	__fs32	fs_cpg;
+	__fs32	fs_ipg;
+	__fs32	fs_fpg;
+	struct ufs_csum fs_cstotal;
+	__s8	fs_fmod;
+	__s8	fs_clean;
+	__s8	fs_ronly;
+	__s8	fs_flags;
+	__s8	fs_fsmnt[UFS_MAXMNTLEN - 212];
+
+};
+
+struct ufs_super_block_second {
+	__s8	fs_fsmnt[212];
+	__fs32	fs_cgrotor;
+	__fs32	fs_csp[UFS_MAXCSBUFS];
+	__fs32	fs_maxcluster;
+	__fs32	fs_cpc;
+	__fs16	fs_opostbl[82];
+};	
+
+struct ufs_super_block_third {
+	__fs16	fs_opostbl[46];
+	union {
+		struct {
+			__fs32	fs_sparecon[53];/* reserved for future constants */
+			__fs32	fs_reclaim;
+			__fs32	fs_sparecon2[1];
+			__fs32	fs_state;	/* file system state time stamp */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+		} fs_sun;
+		struct {
+			__fs32	fs_sparecon[53];/* reserved for future constants */
+			__fs32	fs_reclaim;
+			__fs32	fs_sparecon2[1];
+			__fs32	fs_npsect;	/* # sectors/track including spares */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+		} fs_sunx86;
+		struct {
+			__fs32	fs_sparecon[50];/* reserved for future constants */
+			__fs32	fs_contigsumsize;/* size of cluster summary array */
+			__fs32	fs_maxsymlinklen;/* max length of an internal symlink */
+			__fs32	fs_inodefmt;	/* format of on-disk inodes */
+			__fs32	fs_maxfilesize[2];	/* max representable file size */
+			__fs32	fs_qbmask[2];	/* ~usb_bmask */
+			__fs32	fs_qfmask[2];	/* ~usb_fmask */
+			__fs32	fs_state;	/* file system state time stamp */
+		} fs_44;
+	} fs_u2;
+	__fs32	fs_postblformat;
+	__fs32	fs_nrpos;
+	__fs32	fs_postbloff;
+	__fs32	fs_rotbloff;
+	__fs32	fs_magic;
+	__u8	fs_space[1];
+};
+
+#ifdef __KERNEL__
+
+/* balloc.c */
+extern void ufs_free_fragments (struct inode *, unsigned, unsigned);
+extern void ufs_free_blocks (struct inode *, unsigned, unsigned);
+extern unsigned ufs_new_fragments (struct inode *, __fs32 *, unsigned, unsigned, unsigned, int *);
+
+/* cylinder.c */
+extern struct ufs_cg_private_info * ufs_load_cylinder (struct super_block *, unsigned);
+extern void ufs_put_cylinder (struct super_block *, unsigned);
+
+/* dir.c */
+extern struct inode_operations ufs_dir_inode_operations;
+extern int ufs_add_link (struct dentry *, struct inode *);
+extern ino_t ufs_inode_by_name(struct inode *, struct dentry *);
+extern int ufs_make_empty(struct inode *, struct inode *);
+extern struct ufs_dir_entry * ufs_find_entry (struct dentry *, struct buffer_head **);
+extern int ufs_delete_entry (struct inode *, struct ufs_dir_entry *, struct buffer_head *);
+extern int ufs_empty_dir (struct inode *);
+extern struct ufs_dir_entry * ufs_dotdot (struct inode *, struct buffer_head **);
+extern void ufs_set_link(struct inode *, struct ufs_dir_entry *, struct buffer_head *, struct inode *);
+
+/* file.c */
+extern struct inode_operations ufs_file_inode_operations;
+extern struct file_operations ufs_file_operations;
+
+extern struct address_space_operations ufs_aops;
+
+/* ialloc.c */
+extern void ufs_free_inode (struct inode *inode);
+extern struct inode * ufs_new_inode (struct inode *, int);
+
+/* inode.c */
+extern u64  ufs_frag_map (struct inode *, sector_t);
+extern void ufs_read_inode (struct inode *);
+extern void ufs_put_inode (struct inode *);
+extern int ufs_write_inode (struct inode *, int);
+extern int ufs_sync_inode (struct inode *);
+extern void ufs_delete_inode (struct inode *);
+extern struct buffer_head * ufs_getfrag (struct inode *, unsigned, int, int *);
+extern struct buffer_head * ufs_bread (struct inode *, unsigned, int, int *);
+
+/* namei.c */
+extern struct file_operations ufs_dir_operations;
+        
+/* super.c */
+extern void ufs_warning (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
+extern void ufs_error (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
+extern void ufs_panic (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
+
+/* symlink.c */
+extern struct inode_operations ufs_fast_symlink_inode_operations;
+
+/* truncate.c */
+extern void ufs_truncate (struct inode *);
+
+static inline struct ufs_sb_info *UFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct ufs_inode_info *UFS_I(struct inode *inode)
+{
+	return container_of(inode, struct ufs_inode_info, vfs_inode);
+}
+
+#endif	/* __KERNEL__ */
+
+#endif /* __LINUX_UFS_FS_H */
diff --git a/include/linux/ufs_fs_i.h b/include/linux/ufs_fs_i.h
new file mode 100644
index 000000000000..21665a953978
--- /dev/null
+++ b/include/linux/ufs_fs_i.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/linux/ufs_fs_i.h
+ *
+ * Copyright (C) 1996
+ * Adrian Rodriguez (adrian@franklins-tower.rutgers.edu)
+ * Laboratory for Computer Science Research Computing Facility
+ * Rutgers, The State University of New Jersey
+ *
+ * NeXTstep support added on February 5th 1998 by
+ * Niels Kristian Bech Jensen <nkbj@image.dk>.
+ */
+
+#ifndef _LINUX_UFS_FS_I_H
+#define _LINUX_UFS_FS_I_H
+
+struct ufs_inode_info {
+	union {
+		__fs32	i_data[15];
+		__u8	i_symlink[4*15];
+		__fs64	u2_i_data[15];
+	} i_u1;
+	__u32	i_flags;
+	__u32	i_gen;
+	__u32	i_shadow;
+	__u32	i_unused1;
+	__u32	i_unused2;
+	__u32	i_oeftflag;
+	__u16	i_osync;
+	__u32	i_lastfrag;
+	struct inode vfs_inode;
+};
+
+#endif /* _LINUX_UFS_FS_I_H */
diff --git a/include/linux/ufs_fs_sb.h b/include/linux/ufs_fs_sb.h
new file mode 100644
index 000000000000..c1be4c226486
--- /dev/null
+++ b/include/linux/ufs_fs_sb.h
@@ -0,0 +1,38 @@
+/* 
+ *  linux/include/linux/ufs_fs_sb.h
+ *
+ * Copyright (C) 1996
+ * Adrian Rodriguez (adrian@franklins-tower.rutgers.edu)
+ * Laboratory for Computer Science Research Computing Facility
+ * Rutgers, The State University of New Jersey
+ *
+ * $Id: ufs_fs_sb.h,v 1.8 1998/05/06 12:04:40 jj Exp $
+ *
+ * Write support by Daniel Pirkl <daniel.pirkl@email.cz>
+ */
+
+#ifndef __LINUX_UFS_FS_SB_H
+#define __LINUX_UFS_FS_SB_H
+
+
+#define UFS_MAX_GROUP_LOADED 8
+#define UFS_CGNO_EMPTY ((unsigned)-1)
+
+struct ufs_sb_private_info;
+struct ufs_cg_private_info;
+struct ufs_csum;
+#define UFS_MAXCSBUFS 31
+
+struct ufs_sb_info {
+	struct ufs_sb_private_info * s_uspi;	
+	struct ufs_csum	* s_csp[UFS_MAXCSBUFS];
+	unsigned s_bytesex;
+	unsigned s_flags;
+	struct buffer_head ** s_ucg;
+	struct ufs_cg_private_info * s_ucpi[UFS_MAX_GROUP_LOADED]; 
+	unsigned s_cgno[UFS_MAX_GROUP_LOADED];
+	unsigned short s_cg_loaded;
+	unsigned s_mount_opt;
+};
+
+#endif
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
new file mode 100644
index 000000000000..4c2c82336d10
--- /dev/null
+++ b/include/linux/uinput.h
@@ -0,0 +1,167 @@
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
+/*
+ *  User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ * 
+ * Changes/Revisions:
+ *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
+ *		- added force feedback support
+ *             - added UI_SET_PHYS
+ *	0.1	20/06/2002
+ *		- first public version
+ */
+#ifdef __KERNEL__
+#define UINPUT_MINOR		223
+#define UINPUT_NAME		"uinput"
+#define UINPUT_BUFFER_SIZE	16
+#define UINPUT_NUM_REQUESTS	16
+
+/* state flags => bit index for {set|clear|test}_bit ops */
+#define UIST_CREATED		0
+
+struct uinput_request {
+	int			id;
+	int			code;	/* UI_FF_UPLOAD, UI_FF_ERASE */
+
+	int			retval;
+	wait_queue_head_t	waitq;
+	int			completed;
+
+	union {
+		int		effect_id;
+		struct ff_effect* effect;
+	} u;
+};
+
+struct uinput_device {
+	struct input_dev	*dev;
+	unsigned long		state;
+	wait_queue_head_t	waitq;
+	unsigned char		ready,
+				head,
+				tail;
+	struct input_event	buff[UINPUT_BUFFER_SIZE];
+
+	struct uinput_request	*requests[UINPUT_NUM_REQUESTS];
+	wait_queue_head_t	requests_waitq;
+	struct semaphore	requests_sem;
+};
+#endif	/* __KERNEL__ */
+
+struct uinput_ff_upload {
+	int			request_id;
+	int			retval;
+	struct ff_effect	effect;
+};
+
+struct uinput_ff_erase {
+	int			request_id;
+	int			retval;
+	int			effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE	'U'
+#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
+
+#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/* To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if EV_FF is set.
+ * Otherwise, default implementations of upload_effect and erase_effect
+ * are used.
+ *
+ * To implement upload_effect():
+ *   1. Wait for an event with type==EV_UINPUT and code==UI_FF_UPLOAD.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_upload struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ *      uinput_ff_upload struct. It will be filled in with the
+ *      ff_effect passed to upload_effect().
+ *   4. Perform the effect upload, and place the modified ff_effect
+ *      and a return code back into the uinput_ff_upload struct.
+ *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ *      uinput_ff_upload_effect struct. This will complete execution
+ *      of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ *   1. Wait for an event with type==EV_UINPUT and code==UI_FF_ERASE.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_erase struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ *      uinput_ff_erase struct. It will be filled in with the
+ *      effect ID passed to erase_effect().
+ *   4. Perform the effect erasure, and place a return code back
+ *      into the uinput_ff_erase struct.
+ *      and a return code back into the uinput_ff_erase struct.
+ *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ *      uinput_ff_erase_effect struct. This will complete execution
+ *      of our erase_effect() handler.
+ */
+
+/* This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT		0x0101
+#define UI_FF_UPLOAD		1
+#define UI_FF_ERASE		2
+
+#ifndef NBITS
+#define NBITS(x) ((((x)-1)/(sizeof(long)*8))+1)
+#endif	/* NBITS */
+
+#define UINPUT_MAX_NAME_SIZE	80
+struct uinput_user_dev {
+	char name[UINPUT_MAX_NAME_SIZE];
+	struct input_id id;
+        int ff_effects_max;
+        int absmax[ABS_MAX + 1];
+        int absmin[ABS_MAX + 1];
+        int absfuzz[ABS_MAX + 1];
+        int absflat[ABS_MAX + 1];
+};
+#endif	/* __UINPUT_H_ */
+
diff --git a/include/linux/uio.h b/include/linux/uio.h
new file mode 100644
index 000000000000..9af8bbcd8963
--- /dev/null
+++ b/include/linux/uio.h
@@ -0,0 +1,66 @@
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ *	Berkeley style UIO structures	-	Alan Cox 1994.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+
+/* A word of warning: Our uio structure will clash with the C library one (which is now obsolete). Remove the C
+   library one from sys/uio.h if you have a very old library set */
+
+struct iovec
+{
+	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
+	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+#ifdef __KERNEL__
+
+struct kvec {
+	void *iov_base; /* and that should *never* hold a userland pointer */
+	size_t iov_len;
+};
+
+#endif
+
+/*
+ *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+ 
+#define UIO_FASTIOV	8
+#define UIO_MAXIOV	1024
+#if 0
+#define UIO_MAXIOV	16	/* Maximum iovec's in one operation 
+				   16 matches BSD */
+                                /* Beg pardon: BSD has 1024 --ANK */
+#endif
+
+/*
+ * Total number of bytes covered by an iovec.
+ *
+ * NOTE that it is not safe to use this function until all the iovec's
+ * segment lengths have been validated.  Because the individual lengths can
+ * overflow a size_t when added together.
+ */
+static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
+{
+	unsigned long seg;
+	size_t ret = 0;
+
+	for (seg = 0; seg < nr_segs; seg++)
+		ret += iov[seg].iov_len;
+	return ret;
+}
+
+unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+
+#endif
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
new file mode 100644
index 000000000000..6b7703e75cec
--- /dev/null
+++ b/include/linux/ultrasound.h
@@ -0,0 +1,103 @@
+#ifndef _ULTRASOUND_H_
+#define _ULTRASOUND_H_
+/*
+ *	ultrasound.h - Macros for programming the Gravis Ultrasound
+ *			These macros are extremely device dependent
+ *			and not portable.
+ */
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ */
+
+
+/*
+ *	Private events for Gravis Ultrasound (GUS)
+ *
+ *	Format:
+ *		byte 0 		- SEQ_PRIVATE (0xfe)
+ *		byte 1 		- Synthesizer device number (0-N)
+ *		byte 2 		- Command (see below)
+ *		byte 3 		- Voice number (0-31)
+ *		bytes 4 and 5	- parameter P1 (unsigned short)
+ *		bytes 6 and 7	- parameter P2 (unsigned short)
+ *
+ *	Commands:
+ *		Each command affects one voice defined in byte 3.
+ *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
+ *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
+ *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
+ *		_GUS_VOICEON	- Starts voice (P1=voice mode)
+ *		_GUS_VOICEOFF	- Stops voice (no parameters)
+ *		_GUS_VOICEFADE	- Stops the voice smoothly.
+ *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
+ *		_GUS_VOICEBALA	- Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
+ *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *				  (Like GUS_VOICEVOL but doesn't change the hw
+ *				  volume. It just updates volume in the voice table).
+ *
+ *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
+ *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
+ *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
+ *		_GUS_RAMPON	- Starts volume ramping (no parameters)
+ *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
+ *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
+ *				  for all voices.
+ */
+
+#define _GUS_NUMVOICES		0x00
+#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
+#define _GUS_VOICEON		0x02
+#define _GUS_VOICEOFF		0x03
+#define _GUS_VOICEMODE		0x04
+#define _GUS_VOICEBALA		0x05
+#define _GUS_VOICEFREQ		0x06
+#define _GUS_VOICEVOL		0x07
+#define _GUS_RAMPRANGE		0x08
+#define _GUS_RAMPRATE		0x09
+#define _GUS_RAMPMODE		0x0a
+#define _GUS_RAMPON		0x0b
+#define _GUS_RAMPOFF		0x0c
+#define _GUS_VOICEFADE		0x0d
+#define _GUS_VOLUME_SCALE	0x0e
+#define _GUS_VOICEVOL2		0x0f
+#define _GUS_VOICE_POS		0x10
+
+/*
+ *	GUS API macros
+ */
+
+#define _GUS_CMD(chn, voice, cmd, p1, p2) \
+					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
+					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
+					_seqbuf[_seqbufptr+3] = voice;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
+					_SEQ_ADVBUF(8);}
+
+#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
+#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
+#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
+#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
+#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
+#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
+#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
+#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
+#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
+#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
+#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
+#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
+#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
+#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
+#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
+#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+
+#endif
diff --git a/include/linux/umem.h b/include/linux/umem.h
new file mode 100644
index 000000000000..f36ebfc32bf6
--- /dev/null
+++ b/include/linux/umem.h
@@ -0,0 +1,138 @@
+
+/*
+ * This file contains defines for the
+ *   Micro Memory MM5415
+ * family PCI Memory Module with Battery Backup.
+ *
+ * Copyright Micro Memory INC 2001.  All rights reserved.
+ * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2.
+ * See the file COPYING.
+ */
+
+#ifndef _DRIVERS_BLOCK_MM_H
+#define _DRIVERS_BLOCK_MM_H
+
+
+#define IRQ_TIMEOUT (1 * HZ)
+
+/* CSR register definition */
+#define MEMCTRLSTATUS_MAGIC	0x00
+#define  MM_MAGIC_VALUE		(unsigned char)0x59
+
+#define MEMCTRLSTATUS_BATTERY	0x04
+#define  BATTERY_1_DISABLED	0x01
+#define  BATTERY_1_FAILURE	0x02
+#define  BATTERY_2_DISABLED	0x04
+#define  BATTERY_2_FAILURE	0x08
+
+#define MEMCTRLSTATUS_MEMORY	0x07
+#define  MEM_128_MB		0xfe
+#define  MEM_256_MB		0xfc
+#define  MEM_512_MB		0xf8
+#define  MEM_1_GB		0xf0
+#define  MEM_2_GB		0xe0
+
+#define MEMCTRLCMD_LEDCTRL	0x08
+#define  LED_REMOVE		2
+#define  LED_FAULT		4
+#define  LED_POWER		6
+#define	 LED_FLIP		255
+#define  LED_OFF		0x00
+#define  LED_ON			0x01
+#define  LED_FLASH_3_5		0x02
+#define  LED_FLASH_7_0		0x03
+#define  LED_POWER_ON		0x00
+#define  LED_POWER_OFF		0x01
+#define  USER_BIT1		0x01
+#define  USER_BIT2		0x02
+
+#define MEMORY_INITIALIZED	USER_BIT1
+
+#define MEMCTRLCMD_ERRCTRL	0x0C
+#define  EDC_NONE_DEFAULT	0x00
+#define  EDC_NONE		0x01
+#define  EDC_STORE_READ		0x02
+#define  EDC_STORE_CORRECT	0x03
+
+#define MEMCTRLCMD_ERRCNT	0x0D
+#define MEMCTRLCMD_ERRSTATUS	0x0E
+
+#define ERROR_DATA_LOG		0x20
+#define ERROR_ADDR_LOG		0x28
+#define ERROR_COUNT		0x3D
+#define ERROR_SYNDROME		0x3E
+#define ERROR_CHECK		0x3F
+
+#define DMA_PCI_ADDR		0x40
+#define DMA_LOCAL_ADDR		0x48
+#define DMA_TRANSFER_SIZE	0x50
+#define DMA_DESCRIPTOR_ADDR	0x58
+#define DMA_SEMAPHORE_ADDR	0x60
+#define DMA_STATUS_CTRL		0x68
+#define  DMASCR_GO		0x00001
+#define  DMASCR_TRANSFER_READ	0x00002
+#define  DMASCR_CHAIN_EN	0x00004
+#define  DMASCR_SEM_EN		0x00010
+#define  DMASCR_DMA_COMP_EN	0x00020
+#define  DMASCR_CHAIN_COMP_EN	0x00040
+#define  DMASCR_ERR_INT_EN	0x00080
+#define  DMASCR_PARITY_INT_EN	0x00100
+#define  DMASCR_ANY_ERR		0x00800
+#define  DMASCR_MBE_ERR		0x01000
+#define  DMASCR_PARITY_ERR_REP	0x02000
+#define  DMASCR_PARITY_ERR_DET	0x04000
+#define  DMASCR_SYSTEM_ERR_SIG	0x08000
+#define  DMASCR_TARGET_ABT	0x10000
+#define  DMASCR_MASTER_ABT	0x20000
+#define  DMASCR_DMA_COMPLETE	0x40000
+#define  DMASCR_CHAIN_COMPLETE	0x80000
+
+/* 
+3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE 
+READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA 
+TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE 
+TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS 
+(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, 
+AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING 
+DMA READ OPERATIONS.
+*/
+#define        DMASCR_READ   0x60000000
+#define        DMASCR_READLINE   0xE0000000
+#define        DMASCR_READMULTI   0xC0000000
+
+
+#define DMASCR_ERROR_MASK	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR)
+#define DMASCR_HARD_ERROR	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR)
+
+#define WINDOWMAP_WINNUM	0x7B
+
+#define DMA_READ_FROM_HOST 0
+#define DMA_WRITE_TO_HOST 1
+
+struct mm_dma_desc {
+	__le64	pci_addr;
+	__le64	local_addr;
+	__le32	transfer_size;
+	u32	zero1;
+	__le64	next_desc_addr;
+	__le64	sem_addr;
+	__le32	control_bits;
+	u32	zero2;
+
+	dma_addr_t data_dma_handle;
+
+	/* Copy of the bits */
+	__le64	sem_control_bits;
+} __attribute__((aligned(8)));
+
+#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
+#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
+#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
+#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
+
+/* bits for card->flags */
+#define UM_FLAG_DMA_IN_REGS		1
+#define UM_FLAG_NO_BYTE_STATUS		2
+#define UM_FLAG_NO_BATTREG		4
+#define	UM_FLAG_NO_BATT			8
+#endif
diff --git a/include/linux/un.h b/include/linux/un.h
new file mode 100644
index 000000000000..45561c564b8e
--- /dev/null
+++ b/include/linux/un.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_UN_H
+#define _LINUX_UN_H
+
+#define UNIX_PATH_MAX	108
+
+struct sockaddr_un {
+	sa_family_t sun_family;	/* AF_UNIX */
+	char sun_path[UNIX_PATH_MAX];	/* pathname */
+};
+
+#endif /* _LINUX_UN_H */
diff --git a/include/linux/unistd.h b/include/linux/unistd.h
new file mode 100644
index 000000000000..10ed9834b822
--- /dev/null
+++ b/include/linux/unistd.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_UNISTD_H_
+#define _LINUX_UNISTD_H_
+
+extern int errno;
+
+/*
+ * Include machine specific syscallX macros
+ */
+#include <asm/unistd.h>
+
+#endif /* _LINUX_UNISTD_H_ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
new file mode 100644
index 000000000000..c96728435935
--- /dev/null
+++ b/include/linux/usb.h
@@ -0,0 +1,1157 @@
+#ifndef __LINUX_USB_H
+#define __LINUX_USB_H
+
+#include <linux/mod_devicetable.h>
+#include <linux/usb_ch9.h>
+
+#define USB_MAJOR			180
+
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/errno.h>        /* for -ENODEV */
+#include <linux/delay.h>	/* for mdelay() */
+#include <linux/interrupt.h>	/* for in_interrupt() */
+#include <linux/list.h>		/* for struct list_head */
+#include <linux/kref.h>		/* for struct kref */
+#include <linux/device.h>	/* for struct device */
+#include <linux/fs.h>		/* for struct file_operations */
+#include <linux/completion.h>	/* for struct completion */
+#include <linux/sched.h>	/* for current && schedule_timeout */
+
+struct usb_device;
+struct usb_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Host-side wrappers for standard USB descriptors ... these are parsed
+ * from the data provided by devices.  Parsing turns them from a flat
+ * sequence of descriptors into a hierarchy:
+ *
+ *  - devices have one (usually) or more configs;
+ *  - configs have one (often) or more interfaces;
+ *  - interfaces have one (usually) or more settings;
+ *  - each interface setting has zero or (usually) more endpoints.
+ *
+ * And there might be other descriptors mixed in with those.
+ *
+ * Devices may also have class-specific or vendor-specific descriptors.
+ */
+
+/**
+ * struct usb_host_endpoint - host-side endpoint descriptor and queue
+ * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
+ * @urb_list: urbs queued to this endpoint; maintained by usbcore
+ * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
+ *	with one or more transfer descriptors (TDs) per urb
+ * @extra: descriptors following this endpoint in the configuration
+ * @extralen: how many bytes of "extra" are valid
+ *
+ * USB requests are always queued to a given endpoint, identified by a
+ * descriptor within an active interface in a given USB configuration.
+ */
+struct usb_host_endpoint {
+	struct usb_endpoint_descriptor	desc;
+	struct list_head		urb_list;
+	void				*hcpriv;
+
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+/* host-side wrapper for one interface setting's parsed descriptors */
+struct usb_host_interface {
+	struct usb_interface_descriptor	desc;
+
+	/* array of desc.bNumEndpoint endpoints associated with this
+	 * interface setting.  these will be in no particular order.
+	 */
+	struct usb_host_endpoint *endpoint;
+
+	char *string;		/* iInterface string, if present */
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+enum usb_interface_condition {
+	USB_INTERFACE_UNBOUND = 0,
+	USB_INTERFACE_BINDING,
+	USB_INTERFACE_BOUND,
+	USB_INTERFACE_UNBINDING,
+};
+
+/**
+ * struct usb_interface - what usb device drivers talk to
+ * @altsetting: array of interface structures, one for each alternate
+ * 	setting that may be selected.  Each one includes a set of
+ * 	endpoint configurations.  They will be in no particular order.
+ * @num_altsetting: number of altsettings defined.
+ * @cur_altsetting: the current altsetting.
+ * @driver: the USB driver that is bound to this interface.
+ * @minor: the minor number assigned to this interface, if this
+ *	interface is bound to a driver that uses the USB major number.
+ *	If this interface does not use the USB major, this field should
+ *	be unused.  The driver should set this value in the probe()
+ *	function of the driver, after it has been assigned a minor
+ *	number from the USB core by calling usb_register_dev().
+ * @condition: binding state of the interface: not bound, binding
+ *	(in probe()), bound to a driver, or unbinding (in disconnect())
+ * @dev: driver model's view of this device
+ * @class_dev: driver model's class view of this device.
+ *
+ * USB device drivers attach to interfaces on a physical device.  Each
+ * interface encapsulates a single high level function, such as feeding
+ * an audio stream to a speaker or reporting a change in a volume control.
+ * Many USB devices only have one interface.  The protocol used to talk to
+ * an interface's endpoints can be defined in a usb "class" specification,
+ * or by a product's vendor.  The (default) control endpoint is part of
+ * every interface, but is never listed among the interface's descriptors.
+ *
+ * The driver that is bound to the interface can use standard driver model
+ * calls such as dev_get_drvdata() on the dev member of this structure.
+ *
+ * Each interface may have alternate settings.  The initial configuration
+ * of a device sets altsetting 0, but the device driver can change
+ * that setting using usb_set_interface().  Alternate settings are often
+ * used to control the the use of periodic endpoints, such as by having
+ * different endpoints use different amounts of reserved USB bandwidth.
+ * All standards-conformant USB devices that use isochronous endpoints
+ * will use them in non-default settings.
+ *
+ * The USB specification says that alternate setting numbers must run from
+ * 0 to one less than the total number of alternate settings.  But some
+ * devices manage to mess this up, and the structures aren't necessarily
+ * stored in numerical order anyhow.  Use usb_altnum_to_altsetting() to
+ * look up an alternate setting in the altsetting array based on its number.
+ */
+struct usb_interface {
+	/* array of alternate settings for this interface,
+	 * stored in no particular order */
+	struct usb_host_interface *altsetting;
+
+	struct usb_host_interface *cur_altsetting;	/* the currently
+					 * active alternate setting */
+	unsigned num_altsetting;	/* number of alternate settings */
+
+	int minor;			/* minor number this interface is bound to */
+	enum usb_interface_condition condition;		/* state of binding */
+	struct device dev;		/* interface specific device info */
+	struct class_device *class_dev;
+};
+#define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
+#define	interface_to_usbdev(intf) \
+	container_of(intf->dev.parent, struct usb_device, dev)
+
+static inline void *usb_get_intfdata (struct usb_interface *intf)
+{
+	return dev_get_drvdata (&intf->dev);
+}
+
+static inline void usb_set_intfdata (struct usb_interface *intf, void *data)
+{
+	dev_set_drvdata(&intf->dev, data);
+}
+
+struct usb_interface *usb_get_intf(struct usb_interface *intf);
+void usb_put_intf(struct usb_interface *intf);
+
+/* this maximum is arbitrary */
+#define USB_MAXINTERFACES	32
+
+/**
+ * struct usb_interface_cache - long-term representation of a device interface
+ * @num_altsetting: number of altsettings defined.
+ * @ref: reference counter.
+ * @altsetting: variable-length array of interface structures, one for
+ *	each alternate setting that may be selected.  Each one includes a
+ *	set of endpoint configurations.  They will be in no particular order.
+ *
+ * These structures persist for the lifetime of a usb_device, unlike
+ * struct usb_interface (which persists only as long as its configuration
+ * is installed).  The altsetting arrays can be accessed through these
+ * structures at any time, permitting comparison of configurations and
+ * providing support for the /proc/bus/usb/devices pseudo-file.
+ */
+struct usb_interface_cache {
+	unsigned num_altsetting;	/* number of alternate settings */
+	struct kref ref;		/* reference counter */
+
+	/* variable-length array of alternate settings for this interface,
+	 * stored in no particular order */
+	struct usb_host_interface altsetting[0];
+};
+#define	ref_to_usb_interface_cache(r) \
+		container_of(r, struct usb_interface_cache, ref)
+#define	altsetting_to_usb_interface_cache(a) \
+		container_of(a, struct usb_interface_cache, altsetting[0])
+
+/**
+ * struct usb_host_config - representation of a device's configuration
+ * @desc: the device's configuration descriptor.
+ * @string: pointer to the cached version of the iConfiguration string, if
+ *	present for this configuration.
+ * @interface: array of pointers to usb_interface structures, one for each
+ *	interface in the configuration.  The number of interfaces is stored
+ *	in desc.bNumInterfaces.  These pointers are valid only while the
+ *	the configuration is active.
+ * @intf_cache: array of pointers to usb_interface_cache structures, one
+ *	for each interface in the configuration.  These structures exist
+ *	for the entire life of the device.
+ * @extra: pointer to buffer containing all extra descriptors associated
+ *	with this configuration (those preceding the first interface
+ *	descriptor).
+ * @extralen: length of the extra descriptors buffer.
+ *
+ * USB devices may have multiple configurations, but only one can be active
+ * at any time.  Each encapsulates a different operational environment;
+ * for example, a dual-speed device would have separate configurations for
+ * full-speed and high-speed operation.  The number of configurations
+ * available is stored in the device descriptor as bNumConfigurations.
+ *
+ * A configuration can contain multiple interfaces.  Each corresponds to
+ * a different function of the USB device, and all are available whenever
+ * the configuration is active.  The USB standard says that interfaces
+ * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot
+ * of devices get this wrong.  In addition, the interface array is not
+ * guaranteed to be sorted in numerical order.  Use usb_ifnum_to_if() to
+ * look up an interface entry based on its number.
+ *
+ * Device drivers should not attempt to activate configurations.  The choice
+ * of which configuration to install is a policy decision based on such
+ * considerations as available power, functionality provided, and the user's
+ * desires (expressed through hotplug scripts).  However, drivers can call
+ * usb_reset_configuration() to reinitialize the current configuration and
+ * all its interfaces.
+ */
+struct usb_host_config {
+	struct usb_config_descriptor	desc;
+
+	char *string;
+	/* the interfaces associated with this configuration,
+	 * stored in no particular order */
+	struct usb_interface *interface[USB_MAXINTERFACES];
+
+	/* Interface information available even when this is not the
+	 * active configuration */
+	struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
+
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+int __usb_get_extra_descriptor(char *buffer, unsigned size,
+	unsigned char type, void **ptr);
+#define usb_get_extra_descriptor(ifpoint,type,ptr)\
+	__usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\
+		type,(void**)ptr)
+
+/* -------------------------------------------------------------------------- */
+
+struct usb_operations;
+
+/* USB device number allocation bitmap */
+struct usb_devmap {
+	unsigned long devicemap[128 / (8*sizeof(unsigned long))];
+};
+
+/*
+ * Allocated per bus (tree of devices) we have:
+ */
+struct usb_bus {
+	struct device *controller;	/* host/master side hardware */
+	int busnum;			/* Bus number (in order of reg) */
+	char *bus_name;			/* stable id (PCI slot_name etc) */
+	u8 otg_port;			/* 0, or number of OTG/HNP port */
+	unsigned is_b_host:1;		/* true during some HNP roleswitches */
+	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
+
+	int devnum_next;		/* Next open device number in round-robin allocation */
+
+	struct usb_devmap devmap;	/* device address allocation map */
+	struct usb_operations *op;	/* Operations (specific to the HC) */
+	struct usb_device *root_hub;	/* Root hub */
+	struct list_head bus_list;	/* list of busses */
+	void *hcpriv;                   /* Host Controller private data */
+
+	int bandwidth_allocated;	/* on this bus: how much of the time
+					 * reserved for periodic (intr/iso)
+					 * requests is used, on average?
+					 * Units: microseconds/frame.
+					 * Limits: Full/low speed reserve 90%,
+					 * while high speed reserves 80%.
+					 */
+	int bandwidth_int_reqs;		/* number of Interrupt requests */
+	int bandwidth_isoc_reqs;	/* number of Isoc. requests */
+
+	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the bus */
+
+	struct class_device class_dev;	/* class device for this bus */
+	void (*release)(struct usb_bus *bus);	/* function to destroy this bus's memory */
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+	struct mon_bus *mon_bus;	/* non-null when associated */
+	int monitored;			/* non-zero when monitored */
+#endif
+};
+#define	to_usb_bus(d) container_of(d, struct usb_bus, class_dev)
+
+
+/* -------------------------------------------------------------------------- */
+
+/* This is arbitrary.
+ * From USB 2.0 spec Table 11-13, offset 7, a hub can
+ * have up to 255 ports. The most yet reported is 10.
+ */
+#define USB_MAXCHILDREN		(16)
+
+struct usb_tt;
+
+/*
+ * struct usb_device - kernel's representation of a USB device
+ *
+ * FIXME: Write the kerneldoc!
+ *
+ * Usbcore drivers should not set usbdev->state directly.  Instead use
+ * usb_set_device_state().
+ */
+struct usb_device {
+	int		devnum;		/* Address on USB bus */
+	char		devpath [16];	/* Use in messages: /port/port/... */
+	enum usb_device_state	state;	/* configured, not attached, etc */
+	enum usb_device_speed	speed;	/* high/full/low (or error) */
+
+	struct usb_tt	*tt; 		/* low/full speed dev, highspeed hub */
+	int		ttport;		/* device port on that tt hub */
+
+	struct semaphore serialize;
+
+	unsigned int toggle[2];		/* one bit for each endpoint ([0] = IN, [1] = OUT) */
+
+	struct usb_device *parent;	/* our hub, unless we're the root */
+	struct usb_bus *bus;		/* Bus we're part of */
+	struct usb_host_endpoint ep0;
+
+	struct device dev;		/* Generic device interface */
+
+	struct usb_device_descriptor descriptor;/* Descriptor */
+	struct usb_host_config *config;	/* All of the configs */
+
+	struct usb_host_config *actconfig;/* the active configuration */
+	struct usb_host_endpoint *ep_in[16];
+	struct usb_host_endpoint *ep_out[16];
+
+	char **rawdescriptors;		/* Raw descriptors for each config */
+
+	int have_langid;		/* whether string_langid is valid yet */
+	int string_langid;		/* language ID for strings */
+
+	char *product;
+	char *manufacturer;
+	char *serial;			/* static strings from the device */
+	struct list_head filelist;
+	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the device */
+
+	/*
+	 * Child devices - these can be either new devices
+	 * (if this is a hub device), or different instances
+	 * of this same device.
+	 *
+	 * Each instance needs its own set of data structures.
+	 */
+
+	int maxchild;			/* Number of ports if hub */
+	struct usb_device *children[USB_MAXCHILDREN];
+};
+#define	to_usb_device(d) container_of(d, struct usb_device, dev)
+
+extern struct usb_device *usb_get_dev(struct usb_device *dev);
+extern void usb_put_dev(struct usb_device *dev);
+
+extern void usb_lock_device(struct usb_device *udev);
+extern int usb_trylock_device(struct usb_device *udev);
+extern int usb_lock_device_for_reset(struct usb_device *udev,
+		struct usb_interface *iface);
+extern void usb_unlock_device(struct usb_device *udev);
+
+/* USB port reset for device reinitialization */
+extern int usb_reset_device(struct usb_device *dev);
+
+extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
+
+/*-------------------------------------------------------------------------*/
+
+/* for drivers using iso endpoints */
+extern int usb_get_current_frame_number (struct usb_device *usb_dev);
+
+/* used these for multi-interface device registration */
+extern int usb_driver_claim_interface(struct usb_driver *driver,
+			struct usb_interface *iface, void* priv);
+
+/**
+ * usb_interface_claimed - returns true iff an interface is claimed
+ * @iface: the interface being checked
+ *
+ * Returns true (nonzero) iff the interface is claimed, else false (zero).
+ * Callers must own the driver model's usb bus readlock.  So driver
+ * probe() entries don't need extra locking, but other call contexts
+ * may need to explicitly claim that lock.
+ *
+ */
+static inline int usb_interface_claimed(struct usb_interface *iface) {
+	return (iface->dev.driver != NULL);
+}
+
+extern void usb_driver_release_interface(struct usb_driver *driver,
+			struct usb_interface *iface);
+const struct usb_device_id *usb_match_id(struct usb_interface *interface,
+					 const struct usb_device_id *id);
+
+extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
+		int minor);
+extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev,
+		unsigned ifnum);
+extern struct usb_host_interface *usb_altnum_to_altsetting(
+		struct usb_interface *intf, unsigned int altnum);
+
+
+/**
+ * usb_make_path - returns stable device path in the usb tree
+ * @dev: the device whose path is being constructed
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ *
+ * Returns length of the string (> 0) or negative if size was too small.
+ *
+ * This identifier is intended to be "stable", reflecting physical paths in
+ * hardware such as physical bus addresses for host controllers or ports on
+ * USB hubs.  That makes it stay the same until systems are physically
+ * reconfigured, by re-cabling a tree of USB devices or by moving USB host
+ * controllers.  Adding and removing devices, including virtual root hubs
+ * in host controller driver modules, does not change these path identifers;
+ * neither does rebooting or re-enumerating.  These are more useful identifiers
+ * than changeable ("unstable") ones like bus numbers or device addresses.
+ *
+ * With a partial exception for devices connected to USB 2.0 root hubs, these
+ * identifiers are also predictable.  So long as the device tree isn't changed,
+ * plugging any USB device into a given hub port always gives it the same path.
+ * Because of the use of "companion" controllers, devices connected to ports on
+ * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
+ * high speed, and a different one if they are full or low speed.
+ */
+static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size)
+{
+	int actual;
+	actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath);
+	return (actual >= (int)size) ? -1 : actual;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define USB_DEVICE_ID_MATCH_DEVICE		(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
+#define USB_DEVICE_ID_MATCH_DEV_RANGE		(USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
+#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION	(USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
+#define USB_DEVICE_ID_MATCH_DEV_INFO \
+	(USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
+#define USB_DEVICE_ID_MATCH_INT_INFO \
+	(USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL)
+
+/**
+ * USB_DEVICE - macro used to describe a specific usb device
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device.
+ */
+#define USB_DEVICE(vend,prod) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod)
+/**
+ * USB_DEVICE_VER - macro used to describe a specific usb device with a version range
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ * @lo: the bcdDevice_lo value
+ * @hi: the bcdDevice_hi value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device, with a version range.
+ */
+#define USB_DEVICE_VER(vend,prod,lo,hi) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi)
+
+/**
+ * USB_DEVICE_INFO - macro used to describe a class of usb devices
+ * @cl: bDeviceClass value
+ * @sc: bDeviceSubClass value
+ * @pr: bDeviceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific class of devices.
+ */
+#define USB_DEVICE_INFO(cl,sc,pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr)
+
+/**
+ * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces 
+ * @cl: bInterfaceClass value
+ * @sc: bInterfaceSubClass value
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific class of interfaces.
+ */
+#define USB_INTERFACE_INFO(cl,sc,pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * struct usb_driver - identifies USB driver to usbcore
+ * @owner: Pointer to the module owner of this driver; initialize
+ *	it using THIS_MODULE.
+ * @name: The driver name should be unique among USB drivers,
+ *	and should normally be the same as the module name.
+ * @probe: Called to see if the driver is willing to manage a particular
+ *	interface on a device.  If it is, probe returns zero and uses
+ *	dev_set_drvdata() to associate driver-specific data with the
+ *	interface.  It may also use usb_set_interface() to specify the
+ *	appropriate altsetting.  If unwilling to manage the interface,
+ *	return a negative errno value.
+ * @disconnect: Called when the interface is no longer accessible, usually
+ *	because its device has been (or is being) disconnected or the
+ *	driver module is being unloaded.
+ * @ioctl: Used for drivers that want to talk to userspace through
+ *	the "usbfs" filesystem.  This lets devices provide ways to
+ *	expose information to user space regardless of where they
+ *	do (or don't) show up otherwise in the filesystem.
+ * @suspend: Called when the device is going to be suspended by the system.
+ * @resume: Called when the device is being resumed by the system.
+ * @id_table: USB drivers use ID table to support hotplugging.
+ *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set
+ *	or your driver's probe function will never get called.
+ * @driver: the driver model core driver structure.
+ *
+ * USB drivers must provide a name, probe() and disconnect() methods,
+ * and an id_table.  Other driver fields are optional.
+ *
+ * The id_table is used in hotplugging.  It holds a set of descriptors,
+ * and specialized data may be associated with each entry.  That table
+ * is used by both user and kernel mode hotplugging support.
+ *
+ * The probe() and disconnect() methods are called in a context where
+ * they can sleep, but they should avoid abusing the privilege.  Most
+ * work to connect to a device should be done when the device is opened,
+ * and undone at the last close.  The disconnect code needs to address
+ * concurrency issues with respect to open() and close() methods, as
+ * well as forcing all pending I/O requests to complete (by unlinking
+ * them as necessary, and blocking until the unlinks complete).
+ */
+struct usb_driver {
+	struct module *owner;
+
+	const char *name;
+
+	int (*probe) (struct usb_interface *intf,
+		      const struct usb_device_id *id);
+
+	void (*disconnect) (struct usb_interface *intf);
+
+	int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf);
+
+	int (*suspend) (struct usb_interface *intf, u32 state);
+	int (*resume) (struct usb_interface *intf);
+
+	const struct usb_device_id *id_table;
+
+	struct device_driver driver;
+};
+#define	to_usb_driver(d) container_of(d, struct usb_driver, driver)
+
+extern struct bus_type usb_bus_type;
+
+/**
+ * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
+ * @name: devfs name for this driver.  Will also be used by the driver
+ *	class code to create a usb class device.
+ * @fops: pointer to the struct file_operations of this driver.
+ * @mode: the mode for the devfs file to be created for this driver.
+ * @minor_base: the start of the minor range for this driver.
+ *
+ * This structure is used for the usb_register_dev() and
+ * usb_unregister_dev() functions, to consolidate a number of the
+ * parameters used for them.
+ */
+struct usb_class_driver {
+	char *name;
+	struct file_operations *fops;
+	mode_t mode;
+	int minor_base;	
+};
+
+/*
+ * use these in module_init()/module_exit()
+ * and don't forget MODULE_DEVICE_TABLE(usb, ...)
+ */
+extern int usb_register(struct usb_driver *);
+extern void usb_deregister(struct usb_driver *);
+
+extern int usb_register_dev(struct usb_interface *intf,
+			    struct usb_class_driver *class_driver);
+extern void usb_deregister_dev(struct usb_interface *intf,
+			       struct usb_class_driver *class_driver);
+
+extern int usb_disabled(void);
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * URB support, for asynchronous request completions
+ */
+
+/*
+ * urb->transfer_flags:
+ */
+#define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
+#define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame ignored */
+#define URB_NO_TRANSFER_DMA_MAP	0x0004	/* urb->transfer_dma valid on submit */
+#define URB_NO_SETUP_DMA_MAP	0x0008	/* urb->setup_dma valid on submit */
+#define URB_ASYNC_UNLINK	0x0010	/* usb_unlink_urb() returns asap */
+#define URB_NO_FSBR		0x0020	/* UHCI-specific */
+#define URB_ZERO_PACKET		0x0040	/* Finish bulk OUTs with short packet */
+#define URB_NO_INTERRUPT	0x0080	/* HINT: no non-error interrupt needed */
+
+struct usb_iso_packet_descriptor {
+	unsigned int offset;
+	unsigned int length;		/* expected length */
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct urb;
+struct pt_regs;
+
+typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
+
+/**
+ * struct urb - USB Request Block
+ * @urb_list: For use by current owner of the URB.
+ * @pipe: Holds endpoint number, direction, type, and more.
+ *	Create these values with the eight macros available;
+ *	usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
+ *	(control), "bulk", "int" (interrupt), or "iso" (isochronous).
+ *	For example usb_sndbulkpipe() or usb_rcvintpipe().  Endpoint
+ *	numbers range from zero to fifteen.  Note that "in" endpoint two
+ *	is a different endpoint (and pipe) from "out" endpoint two.
+ *	The current configuration controls the existence, type, and
+ *	maximum packet size of any given endpoint.
+ * @dev: Identifies the USB device to perform the request.
+ * @status: This is read in non-iso completion functions to get the
+ *	status of the particular request.  ISO requests only use it
+ *	to tell whether the URB was unlinked; detailed status for
+ *	each frame is in the fields of the iso_frame-desc.
+ * @transfer_flags: A variety of flags may be used to affect how URB
+ *	submission, unlinking, or operation are handled.  Different
+ *	kinds of URB can use different flags.
+ * @transfer_buffer:  This identifies the buffer to (or from) which
+ * 	the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
+ *	is set).  This buffer must be suitable for DMA; allocate it with
+ *	kmalloc() or equivalent.  For transfers to "in" endpoints, contents
+ *	of this buffer will be modified.  This buffer is used for the data
+ *	stage of control transfers.
+ * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP,
+ *	the device driver is saying that it provided this DMA address,
+ *	which the host controller driver should use in preference to the
+ *	transfer_buffer.
+ * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
+ *	be broken up into chunks according to the current maximum packet
+ *	size for the endpoint, which is a function of the configuration
+ *	and is encoded in the pipe.  When the length is zero, neither
+ *	transfer_buffer nor transfer_dma is used.
+ * @actual_length: This is read in non-iso completion functions, and
+ *	it tells how many bytes (out of transfer_buffer_length) were
+ *	transferred.  It will normally be the same as requested, unless
+ *	either an error was reported or a short read was performed.
+ *	The URB_SHORT_NOT_OK transfer flag may be used to make such
+ *	short reads be reported as errors. 
+ * @setup_packet: Only used for control transfers, this points to eight bytes
+ *	of setup data.  Control transfers always start by sending this data
+ *	to the device.  Then transfer_buffer is read or written, if needed.
+ * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
+ *	device driver has provided this DMA address for the setup packet.
+ *	The host controller driver should use this in preference to
+ *	setup_packet.
+ * @start_frame: Returns the initial frame for isochronous transfers.
+ * @number_of_packets: Lists the number of ISO transfer buffers.
+ * @interval: Specifies the polling interval for interrupt or isochronous
+ *	transfers.  The units are frames (milliseconds) for for full and low
+ *	speed devices, and microframes (1/8 millisecond) for highspeed ones.
+ * @error_count: Returns the number of ISO transfers that reported errors.
+ * @context: For use in completion functions.  This normally points to
+ *	request-specific driver context.
+ * @complete: Completion handler. This URB is passed as the parameter to the
+ *	completion function.  The completion function may then do what
+ *	it likes with the URB, including resubmitting or freeing it.
+ * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to 
+ *	collect the transfer status for each buffer.
+ *
+ * This structure identifies USB transfer requests.  URBs must be allocated by
+ * calling usb_alloc_urb() and freed with a call to usb_free_urb().
+ * Initialization may be done using various usb_fill_*_urb() functions.  URBs
+ * are submitted using usb_submit_urb(), and pending requests may be canceled
+ * using usb_unlink_urb() or usb_kill_urb().
+ *
+ * Data Transfer Buffers:
+ *
+ * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise
+ * taken from the general page pool.  That is provided by transfer_buffer
+ * (control requests also use setup_packet), and host controller drivers
+ * perform a dma mapping (and unmapping) for each buffer transferred.  Those
+ * mapping operations can be expensive on some platforms (perhaps using a dma
+ * bounce buffer or talking to an IOMMU),
+ * although they're cheap on commodity x86 and ppc hardware.
+ *
+ * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
+ * which tell the host controller driver that no such mapping is needed since
+ * the device driver is DMA-aware.  For example, a device driver might
+ * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
+ * When these transfer flags are provided, host controller drivers will
+ * attempt to use the dma addresses found in the transfer_dma and/or
+ * setup_dma fields rather than determining a dma address themselves.  (Note
+ * that transfer_buffer and setup_packet must still be set because not all
+ * host controllers use DMA, nor do virtual root hubs).
+ *
+ * Initialization:
+ *
+ * All URBs submitted must initialize the dev, pipe, transfer_flags (may be
+ * zero), and complete fields.
+ * The URB_ASYNC_UNLINK transfer flag affects later invocations of
+ * the usb_unlink_urb() routine.  Note: Failure to set URB_ASYNC_UNLINK
+ * with usb_unlink_urb() is deprecated.  For synchronous unlinks use
+ * usb_kill_urb() instead.
+ *
+ * All URBs must also initialize 
+ * transfer_buffer and transfer_buffer_length.  They may provide the
+ * URB_SHORT_NOT_OK transfer flag, indicating that short reads are
+ * to be treated as errors; that flag is invalid for write requests.
+ *
+ * Bulk URBs may
+ * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers
+ * should always terminate with a short packet, even if it means adding an
+ * extra zero length packet.
+ *
+ * Control URBs must provide a setup_packet.  The setup_packet and
+ * transfer_buffer may each be mapped for DMA or not, independently of
+ * the other.  The transfer_flags bits URB_NO_TRANSFER_DMA_MAP and
+ * URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped.
+ * URB_NO_SETUP_DMA_MAP is ignored for non-control URBs.
+ *
+ * Interrupt URBs must provide an interval, saying how often (in milliseconds
+ * or, for highspeed devices, 125 microsecond units)
+ * to poll for transfers.  After the URB has been submitted, the interval
+ * field reflects how the transfer was actually scheduled.
+ * The polling interval may be more frequent than requested.
+ * For example, some controllers have a maximum interval of 32 milliseconds,
+ * while others support intervals of up to 1024 milliseconds.
+ * Isochronous URBs also have transfer intervals.  (Note that for isochronous
+ * endpoints, as well as high speed interrupt endpoints, the encoding of
+ * the transfer interval in the endpoint descriptor is logarithmic.
+ * Device drivers must convert that value to linear units themselves.)
+ *
+ * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
+ * the host controller to schedule the transfer as soon as bandwidth
+ * utilization allows, and then set start_frame to reflect the actual frame
+ * selected during submission.  Otherwise drivers must specify the start_frame
+ * and handle the case where the transfer can't begin then.  However, drivers
+ * won't know how bandwidth is currently allocated, and while they can
+ * find the current frame using usb_get_current_frame_number () they can't
+ * know the range for that frame number.  (Ranges for frame counter values
+ * are HC-specific, and can go from 256 to 65536 frames from "now".)
+ *
+ * Isochronous URBs have a different data transfer model, in part because
+ * the quality of service is only "best effort".  Callers provide specially
+ * allocated URBs, with number_of_packets worth of iso_frame_desc structures
+ * at the end.  Each such packet is an individual ISO transfer.  Isochronous
+ * URBs are normally queued, submitted by drivers to arrange that
+ * transfers are at least double buffered, and then explicitly resubmitted
+ * in completion handlers, so
+ * that data (such as audio or video) streams at as constant a rate as the
+ * host controller scheduler can support.
+ *
+ * Completion Callbacks:
+ *
+ * The completion callback is made in_interrupt(), and one of the first
+ * things that a completion handler should do is check the status field.
+ * The status field is provided for all URBs.  It is used to report
+ * unlinked URBs, and status for all non-ISO transfers.  It should not
+ * be examined before the URB is returned to the completion handler.
+ *
+ * The context field is normally used to link URBs back to the relevant
+ * driver or request state.
+ *
+ * When the completion callback is invoked for non-isochronous URBs, the
+ * actual_length field tells how many bytes were transferred.  This field
+ * is updated even when the URB terminated with an error or was unlinked.
+ *
+ * ISO transfer status is reported in the status and actual_length fields
+ * of the iso_frame_desc array, and the number of errors is reported in
+ * error_count.  Completion callbacks for ISO transfers will normally
+ * (re)submit URBs to ensure a constant transfer rate.
+ */
+struct urb
+{
+	/* private, usb core and host controller only fields in the urb */
+	struct kref kref;		/* reference count of the URB */
+	spinlock_t lock;		/* lock for the URB */
+	void *hcpriv;			/* private data for host controller */
+	struct list_head urb_list;	/* list pointer to all active urbs */
+	int bandwidth;			/* bandwidth for INT/ISO request */
+	atomic_t use_count;		/* concurrent submissions counter */
+	u8 reject;			/* submissions will fail */
+
+	/* public, documented fields in the urb that can be used by drivers */
+	struct usb_device *dev; 	/* (in) pointer to associated device */
+	unsigned int pipe;		/* (in) pipe information */
+	int status;			/* (return) non-ISO status */
+	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
+	void *transfer_buffer;		/* (in) associated data buffer */
+	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
+	int transfer_buffer_length;	/* (in) data buffer length */
+	int actual_length;		/* (return) actual transfer length */
+	unsigned char *setup_packet;	/* (in) setup packet (control only) */
+	dma_addr_t setup_dma;		/* (in) dma addr for setup_packet */
+	int start_frame;		/* (modify) start frame (ISO) */
+	int number_of_packets;		/* (in) number of ISO packets */
+	int interval;			/* (modify) transfer interval (INT/ISO) */
+	int error_count;		/* (return) number of ISO errors */
+	void *context;			/* (in) context for completion */
+	usb_complete_t complete;	/* (in) completion routine */
+	struct usb_iso_packet_descriptor iso_frame_desc[0];	/* (in) ISO ONLY */
+};
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * usb_fill_control_urb - initializes a control urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @setup_packet: pointer to the setup_packet buffer
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ *
+ * Initializes a control urb with the proper information needed to submit
+ * it to a device.
+ */
+static inline void usb_fill_control_urb (struct urb *urb,
+					 struct usb_device *dev,
+					 unsigned int pipe,
+					 unsigned char *setup_packet,
+					 void *transfer_buffer,
+					 int buffer_length,
+					 usb_complete_t complete,
+					 void *context)
+{
+	spin_lock_init(&urb->lock);
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->setup_packet = setup_packet;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete;
+	urb->context = context;
+}
+
+/**
+ * usb_fill_bulk_urb - macro to help initialize a bulk urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ *
+ * Initializes a bulk urb with the proper information needed to submit it
+ * to a device.
+ */
+static inline void usb_fill_bulk_urb (struct urb *urb,
+				      struct usb_device *dev,
+				      unsigned int pipe,
+				      void *transfer_buffer,
+				      int buffer_length,
+				      usb_complete_t complete,
+				      void *context)
+{
+	spin_lock_init(&urb->lock);
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete;
+	urb->context = context;
+}
+
+/**
+ * usb_fill_int_urb - macro to help initialize a interrupt urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ * @interval: what to set the urb interval to, encoded like
+ *	the endpoint descriptor's bInterval value.
+ *
+ * Initializes a interrupt urb with the proper information needed to submit
+ * it to a device.
+ * Note that high speed interrupt endpoints use a logarithmic encoding of
+ * the endpoint interval, and express polling intervals in microframes
+ * (eight per millisecond) rather than in frames (one per millisecond).
+ */
+static inline void usb_fill_int_urb (struct urb *urb,
+				     struct usb_device *dev,
+				     unsigned int pipe,
+				     void *transfer_buffer,
+				     int buffer_length,
+				     usb_complete_t complete,
+				     void *context,
+				     int interval)
+{
+	spin_lock_init(&urb->lock);
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete;
+	urb->context = context;
+	if (dev->speed == USB_SPEED_HIGH)
+		urb->interval = 1 << (interval - 1);
+	else
+		urb->interval = interval;
+	urb->start_frame = -1;
+}
+
+extern void usb_init_urb(struct urb *urb);
+extern struct urb *usb_alloc_urb(int iso_packets, int mem_flags);
+extern void usb_free_urb(struct urb *urb);
+#define usb_put_urb usb_free_urb
+extern struct urb *usb_get_urb(struct urb *urb);
+extern int usb_submit_urb(struct urb *urb, int mem_flags);
+extern int usb_unlink_urb(struct urb *urb);
+extern void usb_kill_urb(struct urb *urb);
+
+#define HAVE_USB_BUFFERS
+void *usb_buffer_alloc (struct usb_device *dev, size_t size,
+	int mem_flags, dma_addr_t *dma);
+void usb_buffer_free (struct usb_device *dev, size_t size,
+	void *addr, dma_addr_t dma);
+
+#if 0
+struct urb *usb_buffer_map (struct urb *urb);
+void usb_buffer_dmasync (struct urb *urb);
+void usb_buffer_unmap (struct urb *urb);
+#endif
+
+struct scatterlist;
+int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
+		struct scatterlist *sg, int nents);
+#if 0
+void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
+		struct scatterlist *sg, int n_hw_ents);
+#endif
+void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
+		struct scatterlist *sg, int n_hw_ents);
+
+/*-------------------------------------------------------------------*
+ *                         SYNCHRONOUS CALL SUPPORT                  *
+ *-------------------------------------------------------------------*/
+
+extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
+	__u8 request, __u8 requesttype, __u16 value, __u16 index,
+	void *data, __u16 size, int timeout);
+extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+	void *data, int len, int *actual_length,
+	int timeout);
+
+/* selective suspend/resume */
+extern int usb_suspend_device(struct usb_device *dev, u32 state);
+extern int usb_resume_device(struct usb_device *dev);
+
+
+/* wrappers around usb_control_msg() for the most common standard requests */
+extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
+	unsigned char descindex, void *buf, int size);
+extern int usb_get_status(struct usb_device *dev,
+	int type, int target, void *data);
+extern int usb_get_string(struct usb_device *dev,
+	unsigned short langid, unsigned char index, void *buf, int size);
+extern int usb_string(struct usb_device *dev, int index,
+	char *buf, size_t size);
+
+/* wrappers that also update important state inside usbcore */
+extern int usb_clear_halt(struct usb_device *dev, int pipe);
+extern int usb_reset_configuration(struct usb_device *dev);
+extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+
+/*
+ * timeouts, in milliseconds, used for sending/receiving control messages
+ * they typically complete within a few frames (msec) after they're issued
+ * USB identifies 5 second timeouts, maybe more in a few cases, and a few
+ * slow devices (like some MGE Ellipse UPSes) actually push that limit.
+ */
+#define USB_CTRL_GET_TIMEOUT	5000
+#define USB_CTRL_SET_TIMEOUT	5000
+
+
+/**
+ * struct usb_sg_request - support for scatter/gather I/O
+ * @status: zero indicates success, else negative errno
+ * @bytes: counts bytes transferred.
+ *
+ * These requests are initialized using usb_sg_init(), and then are used
+ * as request handles passed to usb_sg_wait() or usb_sg_cancel().  Most
+ * members of the request object aren't for driver access.
+ *
+ * The status and bytecount values are valid only after usb_sg_wait()
+ * returns.  If the status is zero, then the bytecount matches the total
+ * from the request.
+ *
+ * After an error completion, drivers may need to clear a halt condition
+ * on the endpoint.
+ */
+struct usb_sg_request {
+	int			status;
+	size_t			bytes;
+
+	/* 
+	 * members below are private to usbcore,
+	 * and are not provided for driver access!
+	 */
+	spinlock_t		lock;
+
+	struct usb_device	*dev;
+	int			pipe;
+	struct scatterlist	*sg;
+	int			nents;
+
+	int			entries;
+	struct urb		**urbs;
+
+	int			count;
+	struct completion	complete;
+};
+
+int usb_sg_init (
+	struct usb_sg_request	*io,
+	struct usb_device	*dev,
+	unsigned		pipe, 
+	unsigned		period,
+	struct scatterlist	*sg,
+	int			nents,
+	size_t			length,
+	int			mem_flags
+);
+void usb_sg_cancel (struct usb_sg_request *io);
+void usb_sg_wait (struct usb_sg_request *io);
+
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * For various legacy reasons, Linux has a small cookie that's paired with
+ * a struct usb_device to identify an endpoint queue.  Queue characteristics
+ * are defined by the endpoint's descriptor.  This cookie is called a "pipe",
+ * an unsigned int encoded as:
+ *
+ *  - direction:	bit 7		(0 = Host-to-Device [Out],
+ *					 1 = Device-to-Host [In] ...
+ *					like endpoint bEndpointAddress)
+ *  - device address:	bits 8-14       ... bit positions known to uhci-hcd
+ *  - endpoint:		bits 15-18      ... bit positions known to uhci-hcd
+ *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
+ *					 10 = control, 11 = bulk)
+ *
+ * Given the device address and endpoint descriptor, pipes are redundant.
+ */
+
+/* NOTE:  these are not the standard USB_ENDPOINT_XFER_* values!! */
+/* (yet ... they're the values used by usbfs) */
+#define PIPE_ISOCHRONOUS		0
+#define PIPE_INTERRUPT			1
+#define PIPE_CONTROL			2
+#define PIPE_BULK			3
+
+#define usb_pipein(pipe)	((pipe) & USB_DIR_IN)
+#define usb_pipeout(pipe)	(!usb_pipein(pipe))
+
+#define usb_pipedevice(pipe)	(((pipe) >> 8) & 0x7f)
+#define usb_pipeendpoint(pipe)	(((pipe) >> 15) & 0xf)
+
+#define usb_pipetype(pipe)	(((pipe) >> 30) & 3)
+#define usb_pipeisoc(pipe)	(usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
+#define usb_pipeint(pipe)	(usb_pipetype((pipe)) == PIPE_INTERRUPT)
+#define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
+#define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
+
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep)))
+
+
+static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint)
+{
+	return (dev->devnum << 8) | (endpoint << 15);
+}
+
+/* Create various pipes... */
+#define usb_sndctrlpipe(dev,endpoint)	((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvctrlpipe(dev,endpoint)	((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndisocpipe(dev,endpoint)	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvisocpipe(dev,endpoint)	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndbulkpipe(dev,endpoint)	((PIPE_BULK << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvbulkpipe(dev,endpoint)	((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndintpipe(dev,endpoint)	((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvintpipe(dev,endpoint)	((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+
+/*-------------------------------------------------------------------------*/
+
+static inline __u16
+usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
+{
+	struct usb_host_endpoint	*ep;
+	unsigned			epnum = usb_pipeendpoint(pipe);
+
+	if (is_out) {
+		WARN_ON(usb_pipein(pipe));
+		ep = udev->ep_out[epnum];
+	} else {
+		WARN_ON(usb_pipeout(pipe));
+		ep = udev->ep_in[epnum];
+	}
+	if (!ep)
+		return 0;
+
+	/* NOTE:  only 0x07ff bits are for packet size... */
+	return le16_to_cpu(ep->desc.wMaxPacketSize);
+}
+
+/* -------------------------------------------------------------------------- */
+
+#ifdef DEBUG
+#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg)
+#else
+#define dbg(format, arg...) do {} while (0)
+#endif
+
+#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg)
+
+
+#endif  /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/usb_cdc.h b/include/linux/usb_cdc.h
new file mode 100644
index 000000000000..1b68c122279a
--- /dev/null
+++ b/include/linux/usb_cdc.h
@@ -0,0 +1,192 @@
+/*
+ * USB Communications Device Class (CDC) definitions
+ *
+ * CDC says how to talk to lots of different types of network adapters,
+ * notably ethernet adapters and various modems.  It's used mostly with
+ * firmware based USB peripherals.
+ */
+
+#define USB_CDC_SUBCLASS_ACM			0x02
+#define USB_CDC_SUBCLASS_ETHERNET		0x06
+#define USB_CDC_SUBCLASS_WHCM			0x08
+#define USB_CDC_SUBCLASS_DMM			0x09
+#define USB_CDC_SUBCLASS_MDLM			0x0a
+#define USB_CDC_SUBCLASS_OBEX			0x0b
+
+#define USB_CDC_PROTO_NONE			0
+
+#define USB_CDC_ACM_PROTO_AT_V25TER		1
+#define USB_CDC_ACM_PROTO_AT_PCCA101		2
+#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE	3
+#define USB_CDC_ACM_PROTO_AT_GSM		4
+#define USB_CDC_ACM_PROTO_AT_3G			5
+#define USB_CDC_ACM_PROTO_AT_CDMA		6
+#define USB_CDC_ACM_PROTO_VENDOR		0xff
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific descriptors ... there are a couple dozen of them
+ */
+
+#define USB_CDC_HEADER_TYPE		0x00		/* header_desc */
+#define USB_CDC_CALL_MANAGEMENT_TYPE	0x01		/* call_mgmt_descriptor */
+#define USB_CDC_ACM_TYPE		0x02		/* acm_descriptor */
+#define USB_CDC_UNION_TYPE		0x06		/* union_desc */
+#define USB_CDC_COUNTRY_TYPE		0x07
+#define USB_CDC_ETHERNET_TYPE		0x0f		/* ether_desc */
+#define USB_CDC_WHCM_TYPE		0x11
+#define USB_CDC_MDLM_TYPE		0x12		/* mdlm_desc */
+#define USB_CDC_MDLM_DETAIL_TYPE	0x13		/* mdlm_detail_desc */
+#define USB_CDC_DMM_TYPE		0x14
+#define USB_CDC_OBEX_TYPE		0x15
+
+/* "Header Functional Descriptor" from CDC spec  5.2.3.1 */
+struct usb_cdc_header_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdCDC;
+} __attribute__ ((packed));
+
+/* "Call Management Descriptor" from CDC spec  5.2.3.2 */
+struct usb_cdc_call_mgmt_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bmCapabilities;
+#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT		0x01
+#define USB_CDC_CALL_MGMT_CAP_DATA_INTF		0x02
+
+	__u8	bDataInterface;
+} __attribute__ ((packed));
+
+/* "Abstract Control Management Descriptor" from CDC spec  5.2.3.3 */
+struct usb_cdc_acm_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bmCapabilities;
+} __attribute__ ((packed));
+
+/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
+struct usb_cdc_union_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bMasterInterface0;
+	__u8	bSlaveInterface0;
+	/* ... and there could be other slave interfaces */
+} __attribute__ ((packed));
+
+/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
+struct usb_cdc_ether_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	iMACAddress;
+	__le32	bmEthernetStatistics;
+	__le16	wMaxSegmentSize;
+	__le16	wNumberMCFilters;
+	__u8	bNumberPowerFilters;
+} __attribute__ ((packed));
+
+/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
+struct usb_cdc_mdlm_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdVersion;
+	__u8	bGUID[16];
+} __attribute__ ((packed));
+
+/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
+struct usb_cdc_mdlm_detail_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	/* type is associated with mdlm_desc.bGUID */
+	__u8	bGuidDescriptorType;
+	__u8	bDetailData[];
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Control Requests (6.2)
+ *
+ * section 3.6.2.1 table 4 has the ACM profile, for modems.
+ * section 3.8.2 table 10 has the ethernet profile.
+ *
+ * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
+ * heavily dependent on the encapsulated (proprietary) command mechanism.
+ */
+
+#define USB_CDC_SEND_ENCAPSULATED_COMMAND	0x00
+#define USB_CDC_GET_ENCAPSULATED_RESPONSE	0x01
+#define USB_CDC_REQ_SET_LINE_CODING		0x20
+#define USB_CDC_REQ_GET_LINE_CODING		0x21
+#define USB_CDC_REQ_SET_CONTROL_LINE_STATE	0x22
+#define USB_CDC_REQ_SEND_BREAK			0x23
+#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS	0x40
+#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER	0x41
+#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER	0x42
+#define USB_CDC_SET_ETHERNET_PACKET_FILTER	0x43
+#define USB_CDC_GET_ETHERNET_STATISTIC		0x44
+
+/* Line Coding Structure from CDC spec 6.2.13 */
+struct usb_cdc_line_coding {
+	__le32	dwDTERate;
+	__u8	bCharFormat;
+#define USB_CDC_1_STOP_BITS			0
+#define USB_CDC_1_5_STOP_BITS			1
+#define USB_CDC_2_STOP_BITS			2
+
+	__u8	bParityType;
+#define USB_CDC_NO_PARITY			0
+#define USB_CDC_ODD_PARITY			1
+#define USB_CDC_EVEN_PARITY			2
+#define USB_CDC_MARK_PARITY			3
+#define USB_CDC_SPACE_PARITY			4
+
+	__u8	bDataBits;
+} __attribute__ ((packed));
+
+/* table 62; bits in multicast filter */
+#define	USB_CDC_PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define	USB_CDC_PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define	USB_CDC_PACKET_TYPE_DIRECTED		(1 << 2)
+#define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
+#define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Notifications (6.3) sent by interrupt transfers
+ *
+ * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
+ * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
+ * RNDIS also defines its own bit-incompatible notifications
+ */
+
+#define USB_CDC_NOTIFY_NETWORK_CONNECTION	0x00
+#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE	0x01
+#define USB_CDC_NOTIFY_SERIAL_STATE		0x20
+#define USB_CDC_NOTIFY_SPEED_CHANGE		0x2a
+
+struct usb_cdc_notification {
+	__u8	bmRequestType;
+	__u8	bNotificationType;
+	__le16	wValue;
+	__le16	wIndex;
+	__le16	wLength;
+} __attribute__ ((packed));
+
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
new file mode 100644
index 000000000000..f5fe94e09a03
--- /dev/null
+++ b/include/linux/usb_ch9.h
@@ -0,0 +1,384 @@
+/*
+ * This file holds USB constants and structures that are needed for USB
+ * device APIs.  These are used by the USB device model, which is defined
+ * in chapter 9 of the USB 2.0 specification.  Linux has several APIs in C
+ * that need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - (eventually) a Linux "gadget" slave/device side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device.  That means
+ * the master and slave side APIs will benefit from working well together.
+ */
+
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <asm/types.h>		/* __u8 etc */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT			0		/* to device */
+#define USB_DIR_IN			0x80		/* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK			(0x03 << 5)
+#define USB_TYPE_STANDARD		(0x00 << 5)
+#define USB_TYPE_CLASS			(0x01 << 5)
+#define USB_TYPE_VENDOR			(0x02 << 5)
+#define USB_TYPE_RESERVED		(0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK			0x1f
+#define USB_RECIP_DEVICE		0x00
+#define USB_RECIP_INTERFACE		0x01
+#define USB_RECIP_ENDPOINT		0x02
+#define USB_RECIP_OTHER			0x03
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS		0x00
+#define USB_REQ_CLEAR_FEATURE		0x01
+#define USB_REQ_SET_FEATURE		0x03
+#define USB_REQ_SET_ADDRESS		0x05
+#define USB_REQ_GET_DESCRIPTOR		0x06
+#define USB_REQ_SET_DESCRIPTOR		0x07
+#define USB_REQ_GET_CONFIGURATION	0x08
+#define USB_REQ_SET_CONFIGURATION	0x09
+#define USB_REQ_GET_INTERFACE		0x0A
+#define USB_REQ_SET_INTERFACE		0x0B
+#define USB_REQ_SYNCH_FRAME		0x0C
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
+ * are at most sixteen features of each type.)
+ */
+#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE		2	/* (high speed only) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* dev may initiate HNP */
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* other RH port does */
+#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
+
+#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
+
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device.  It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__le16 wValue;
+	__le16 wIndex;
+	__le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire".  But when exposed through Linux-USB APIs,
+ * they've been converted to cpu byte order.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE			0x01
+#define USB_DT_CONFIG			0x02
+#define USB_DT_STRING			0x03
+#define USB_DT_INTERFACE		0x04
+#define USB_DT_ENDPOINT			0x05
+#define USB_DT_DEVICE_QUALIFIER		0x06
+#define USB_DT_OTHER_SPEED_CONFIG	0x07
+#define USB_DT_INTERFACE_POWER		0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG			0x09
+#define USB_DT_DEBUG			0x0a
+#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+
+/* conventional codes for class-specific descriptors */
+#define USB_DT_CS_DEVICE		0x21
+#define USB_DT_CS_CONFIG		0x22
+#define USB_DT_CS_STRING		0x23
+#define USB_DT_CS_INTERFACE		0x24
+#define USB_DT_CS_ENDPOINT		0x25
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	__u8  iManufacturer;
+	__u8  iProduct;
+	__u8  iSerialNumber;
+	__u8  bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE		18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
+#define USB_CLASS_AUDIO			1
+#define USB_CLASS_COMM			2
+#define USB_CLASS_HID			3
+#define USB_CLASS_PHYSICAL		5
+#define USB_CLASS_STILL_IMAGE		6
+#define USB_CLASS_PRINTER		7
+#define USB_CLASS_MASS_STORAGE		8
+#define USB_CLASS_HUB			9
+#define USB_CLASS_CDC_DATA		0x0a
+#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
+#define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_APP_SPEC		0xfe
+#define USB_CLASS_VENDOR_SPEC		0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different.  Highspeed-capable devices can look
+ * different depending on what speed they're currently running.  Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumInterfaces;
+	__u8  bConfigurationValue;
+	__u8  iConfiguration;
+	__u8  bmAttributes;
+	__u8  bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE		9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
+#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
+#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wData[1];		/* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bInterfaceNumber;
+	__u8  bAlternateSetting;
+	__u8  bNumEndpoints;
+	__u8  bInterfaceClass;
+	__u8  bInterfaceSubClass;
+	__u8  bInterfaceProtocol;
+	__u8  iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE		9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+
+	// NOTE:  these two are _only_ in audio endpoints.
+	// use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof.
+	__u8  bRefresh;
+	__u8  bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE		7
+#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK		0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL	0
+#define USB_ENDPOINT_XFER_ISOC		1
+#define USB_ENDPOINT_XFER_BULK		2
+#define USB_ENDPOINT_XFER_INT		3
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__u8  bNumConfigurations;
+	__u8  bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bmAttributes;	/* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP		(1 << 0)
+#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	/* bulk endpoints with 8 byte maxpacket */
+	__u8  bDebugInEndpoint;
+	__u8  bDebugOutEndpoint;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bFirstInterface;
+	__u8  bInterfaceCount;
+	__u8  bFunctionClass;
+	__u8  bFunctionSubClass;
+	__u8  bFunctionProtocol;
+	__u8  iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH				/* usb 2.0 */
+};
+
+enum usb_device_state {
+	/* NOTATTACHED isn't in the USB spec, and this state acts
+	 * the same as ATTACHED ... but it's clearer this way.
+	 */
+	USB_STATE_NOTATTACHED = 0,
+
+	/* the chapter 9 device states */
+	USB_STATE_ATTACHED,
+	USB_STATE_POWERED,
+	USB_STATE_DEFAULT,			/* limited function */
+	USB_STATE_ADDRESS,
+	USB_STATE_CONFIGURED,			/* most functions */
+
+	USB_STATE_SUSPENDED
+
+	/* NOTE:  there are actually four different SUSPENDED
+	 * states, returning to POWERED, DEFAULT, ADDRESS, or
+	 * CONFIGURED respectively when SOF tokens flow again.
+	 */
+};
+
+#endif	/* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
new file mode 100644
index 000000000000..9bba9997947b
--- /dev/null
+++ b/include/linux/usb_gadget.h
@@ -0,0 +1,878 @@
+/*
+ * <linux/usb_gadget.h>
+ *
+ * We call the USB code inside a Linux-based peripheral device a "gadget"
+ * driver, except for the hardware-specific bus glue.  One USB host can
+ * master many USB gadgets, but the gadgets are only slaved to one host.
+ *
+ *
+ * (C) Copyright 2002-2004 by David Brownell
+ * All Rights Reserved.
+ *
+ * This software is licensed under the GNU GPL version 2.
+ */
+
+#ifndef __LINUX_USB_GADGET_H
+#define __LINUX_USB_GADGET_H
+
+#ifdef __KERNEL__
+
+struct usb_ep;
+
+/**
+ * struct usb_request - describes one i/o request
+ * @buf: Buffer used for data.  Always provide this; some controllers
+ * 	only use PIO, or don't use DMA for some endpoints.
+ * @dma: DMA address corresponding to 'buf'.  If you don't set this
+ * 	field, and the usb controller needs one, it is responsible
+ * 	for mapping and unmapping the buffer.
+ * @length: Length of that data
+ * @no_interrupt: If true, hints that no completion irq is needed.
+ *	Helpful sometimes with deep request queues that are handled
+ *	directly by DMA controllers.
+ * @zero: If true, when writing data, makes the last packet be "short"
+ *     by adding a zero length packet as needed;
+ * @short_not_ok: When reading data, makes short packets be
+ *     treated as errors (queue stops advancing till cleanup).
+ * @complete: Function called when request completes, so this request and
+ *	its buffer may be re-used.
+ *	Reads terminate with a short packet, or when the buffer fills,
+ *	whichever comes first.  When writes terminate, some data bytes
+ *	will usually still be in flight (often in a hardware fifo).
+ *	Errors (for reads or writes) stop the queue from advancing
+ *	until the completion function returns, so that any transfers
+ *	invalidated by the error may first be dequeued.
+ * @context: For use by the completion callback
+ * @list: For use by the gadget driver.
+ * @status: Reports completion code, zero or a negative errno.
+ * 	Normally, faults block the transfer queue from advancing until
+ * 	the completion callback returns.
+ * 	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ * 	or when the driver disabled the endpoint.
+ * @actual: Reports bytes transferred to/from the buffer.  For reads (OUT
+ * 	transfers) this may be less than the requested length.  If the
+ * 	short_not_ok flag is set, short reads are treated as errors
+ * 	even when status otherwise indicates successful completion.
+ * 	Note that for writes (IN transfers) some data bytes may still
+ * 	reside in a device-side FIFO when the request is reported as
+ *	complete.
+ *
+ * These are allocated/freed through the endpoint they're used with.  The
+ * hardware's driver can add extra per-request data to the memory it returns,
+ * which often avoids separate memory allocations (potential failures),
+ * later when the request is queued.
+ *
+ * Request flags affect request handling, such as whether a zero length
+ * packet is written (the "zero" flag), whether a short read should be
+ * treated as an error (blocking request queue advance, the "short_not_ok"
+ * flag), or hinting that an interrupt is not required (the "no_interrupt"
+ * flag, for use with deep request queues).
+ *
+ * Bulk endpoints can use any size buffers, and can also be used for interrupt
+ * transfers. interrupt-only endpoints can be much less functional.
+ */
+	// NOTE this is analagous to 'struct urb' on the host side,
+	// except that it's thinner and promotes more pre-allocation.
+
+struct usb_request {
+	void			*buf;
+	unsigned		length;
+	dma_addr_t		dma;
+
+	unsigned		no_interrupt:1;
+	unsigned		zero:1;
+	unsigned		short_not_ok:1;
+
+	void			(*complete)(struct usb_ep *ep,
+					struct usb_request *req);
+	void			*context;
+	struct list_head	list;
+
+	int			status;
+	unsigned		actual;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint-specific parts of the api to the usb controller hardware.
+ * unlike the urb model, (de)multiplexing layers are not required.
+ * (so this api could slash overhead if used on the host side...)
+ *
+ * note that device side usb controllers commonly differ in how many
+ * endpoints they support, as well as their capabilities.
+ */
+struct usb_ep_ops {
+	int (*enable) (struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc);
+	int (*disable) (struct usb_ep *ep);
+
+	struct usb_request *(*alloc_request) (struct usb_ep *ep,
+		int gfp_flags);
+	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
+
+	void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes,
+		dma_addr_t *dma, int gfp_flags);
+	void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma,
+		unsigned bytes);
+	// NOTE:  on 2.6, drivers may also use dma_map() and
+	// dma_sync_single_*() to directly manage dma overhead. 
+
+	int (*queue) (struct usb_ep *ep, struct usb_request *req,
+		int gfp_flags);
+	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
+
+	int (*set_halt) (struct usb_ep *ep, int value);
+	int (*fifo_status) (struct usb_ep *ep);
+	void (*fifo_flush) (struct usb_ep *ep);
+};
+
+/**
+ * struct usb_ep - device side representation of USB endpoint
+ * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @maxpacket:The maximum packet size used on this endpoint.  The initial
+ *	value can sometimes be reduced (hardware allowing), according to
+ *      the endpoint descriptor used to configure the endpoint.
+ * @driver_data:for use by the gadget driver.  all other fields are
+ * 	read-only to gadget drivers.
+ *
+ * the bus controller driver lists all the general purpose endpoints in
+ * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
+ * and is accessed only in response to a driver setup() callback.
+ */
+struct usb_ep {
+	void			*driver_data;
+
+	const char		*name;
+	const struct usb_ep_ops	*ops;
+	struct list_head	ep_list;
+	unsigned		maxpacket:16;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ * 	drivers discover endpoints through the ep_list of a usb_gadget.
+ * @desc:descriptor for desired behavior.  caller guarantees this pointer
+ * 	remains valid until the endpoint is disabled; the data byte order
+ * 	is little-endian (usb-standard).
+ *
+ * when configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int
+usb_ep_enable (struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	return ep->ops->enable (ep, desc);
+}
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int
+usb_ep_disable (struct usb_ep *ep)
+{
+	return ep->ops->disable (ep);
+}
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+static inline struct usb_request *
+usb_ep_alloc_request (struct usb_ep *ep, int gfp_flags)
+{
+	return ep->ops->alloc_request (ep, gfp_flags);
+}
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+static inline void
+usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
+{
+	ep->ops->free_request (ep, req);
+}
+
+/**
+ * usb_ep_alloc_buffer - allocate an I/O buffer
+ * @ep:the endpoint associated with the buffer
+ * @len:length of the desired buffer
+ * @dma:pointer to the buffer's DMA address; must be valid
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Returns a new buffer, or null if one could not be allocated.
+ * The buffer is suitably aligned for dma, if that endpoint uses DMA,
+ * and the caller won't have to care about dma-inconsistency
+ * or any hidden "bounce buffer" mechanism.  No additional per-request
+ * DMA mapping will be required for such buffers.
+ * Free it later with usb_ep_free_buffer().
+ *
+ * You don't need to use this call to allocate I/O buffers unless you
+ * want to make sure drivers don't incur costs for such "bounce buffer"
+ * copies or per-request DMA mappings.
+ */
+static inline void *
+usb_ep_alloc_buffer (struct usb_ep *ep, unsigned len, dma_addr_t *dma,
+	int gfp_flags)
+{
+	return ep->ops->alloc_buffer (ep, len, dma, gfp_flags);
+}
+
+/**
+ * usb_ep_free_buffer - frees an i/o buffer
+ * @ep:the endpoint associated with the buffer
+ * @buf:CPU view address of the buffer
+ * @dma:the buffer's DMA address
+ * @len:length of the buffer
+ *
+ * reverses the effect of usb_ep_alloc_buffer().
+ * caller guarantees the buffer will no longer be accessed
+ */
+static inline void
+usb_ep_free_buffer (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned len)
+{
+	ep->ops->free_buffer (ep, buf, dma, len);
+}
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ * 	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transfering data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+static inline int
+usb_ep_queue (struct usb_ep *ep, struct usb_request *req, int gfp_flags)
+{
+	return ep->ops->queue (ep, req, gfp_flags);
+}
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * if the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned.
+ *
+ * note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb.  such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+static inline int usb_ep_dequeue (struct usb_ep *ep, struct usb_request *req)
+{
+	return ep->ops->dequeue (ep, req);
+}
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+static inline int
+usb_ep_set_halt (struct usb_ep *ep)
+{
+	return ep->ops->set_halt (ep, 1);
+}
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+static inline int
+usb_ep_clear_halt (struct usb_ep *ep)
+{
+	return ep->ops->set_halt (ep, 0);
+}
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+static inline int
+usb_ep_fifo_status (struct usb_ep *ep)
+{
+	if (ep->ops->fifo_status)
+		return ep->ops->fifo_status (ep);
+	else
+		return -EOPNOTSUPP;
+}
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+static inline void
+usb_ep_fifo_flush (struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush (ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_gadget;
+
+/* the rest of the api to the controller hardware: device operations,
+ * which don't involve endpoints (or i/o).
+ */
+struct usb_gadget_ops {
+	int	(*get_frame)(struct usb_gadget *);
+	int	(*wakeup)(struct usb_gadget *);
+	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+	int	(*vbus_session) (struct usb_gadget *, int is_active);
+	int	(*vbus_draw) (struct usb_gadget *, unsigned mA);
+	int	(*pullup) (struct usb_gadget *, int is_on);
+	int	(*ioctl)(struct usb_gadget *,
+				unsigned code, unsigned long param);
+};
+
+/**
+ * struct usb_gadget - represents a usb slave device
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep0: Endpoint zero, used when reading or writing responses to
+ * 	driver setup() requests
+ * @ep_list: List of other endpoints supported by the device.
+ * @speed: Speed of current connection to USB host.
+ * @is_dualspeed: True if the controller supports both high and full speed
+ *	operation.  If it does, the gadget driver must also support both.
+ * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
+ *	gadget driver must provide a USB OTG descriptor.
+ * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
+ *	is in the Mini-AB jack, and HNP has been used to switch roles
+ *	so that the "A" device currently acts as A-Peripheral, not A-Host.
+ * @a_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	supports HNP at this port.
+ * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	only supports HNP on a different root port.
+ * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
+ *	enabled HNP support.
+ * @name: Identifies the controller hardware type.  Used in diagnostics
+ * 	and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ *
+ * Gadgets have a mostly-portable "gadget driver" implementing device
+ * functions, handling all usb configurations and interfaces.  Gadget
+ * drivers talk to hardware-specific code indirectly, through ops vectors.
+ * That insulates the gadget driver from hardware details, and packages
+ * the hardware endpoints through generic i/o queues.  The "usb_gadget"
+ * and "usb_ep" interfaces provide that insulation from the hardware.
+ *
+ * Except for the driver data, all fields in this structure are
+ * read-only to the gadget driver.  That driver data is part of the
+ * "driver model" infrastructure in 2.6 (and later) kernels, and for
+ * earlier systems is grouped in a similar structure that's not known
+ * to the rest of the kernel.
+ *
+ * Values of the three OTG device feature flags are updated before the
+ * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
+ * driver suspend() calls.  They are valid only when is_otg, and when the
+ * device is acting as a B-Peripheral (so is_a_peripheral is false).
+ */
+struct usb_gadget {
+	/* readonly to gadget driver */
+	const struct usb_gadget_ops	*ops;
+	struct usb_ep			*ep0;
+	struct list_head		ep_list;	/* of usb_ep */
+	enum usb_device_speed		speed;
+	unsigned			is_dualspeed:1;
+	unsigned			is_otg:1;
+	unsigned			is_a_peripheral:1;
+	unsigned			b_hnp_enable:1;
+	unsigned			a_hnp_support:1;
+	unsigned			a_alt_hnp_support:1;
+	const char			*name;
+	struct device			dev;
+};
+
+static inline void set_gadget_data (struct usb_gadget *gadget, void *data)
+	{ dev_set_drvdata (&gadget->dev, data); }
+static inline void *get_gadget_data (struct usb_gadget *gadget)
+	{ return dev_get_drvdata (&gadget->dev); }
+
+/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
+#define gadget_for_each_ep(tmp,gadget) \
+	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
+
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+static inline int usb_gadget_frame_number (struct usb_gadget *gadget)
+{
+	return gadget->ops->get_frame (gadget);
+}
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+static inline int usb_gadget_wakeup (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->wakeup)
+		return -EOPNOTSUPP;
+	return gadget->ops->wakeup (gadget);
+}
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_set_selfpowered (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered (gadget, 1);
+}
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_clear_selfpowered (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered (gadget, 0);
+}
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session (gadget, 1);
+}
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	if (!gadget->ops->vbus_draw)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_draw (gadget, mA);
+}
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session (gadget, 0);
+}
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).  This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_connect (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup (gadget, 1);
+}
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_connect() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_disconnect (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup (gadget, 0);
+}
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * struct usb_gadget_driver - driver for usb 'slave' devices
+ * @function: String describing the gadget's function
+ * @speed: Highest speed the driver handles.
+ * @bind: Invoked when the driver is bound to a gadget, usually
+ * 	after registering the driver.
+ * 	At that point, ep0 is fully initialized, and ep_list holds
+ * 	the currently-available endpoints.
+ * 	Called in a context that permits sleeping.
+ * @setup: Invoked for ep0 control requests that aren't handled by
+ * 	the hardware level driver. Most calls must be handled by
+ * 	the gadget driver, including descriptor and configuration
+ * 	management.  The 16 bit members of the setup data are in
+ * 	cpu order. Called in_interrupt; this may not sleep.  Driver
+ *	queues a response to ep0, or returns negative to stall.
+ * @disconnect: Invoked after all transfers have been stopped,
+ * 	when the host is disconnected.  May be called in_interrupt; this
+ * 	may not sleep.  Some devices can't detect disconnect, so this might
+ *	not be called except as part of controller shutdown.
+ * @unbind: Invoked when the driver is unbound from a gadget,
+ * 	usually from rmmod (after a disconnect is reported).
+ * 	Called in a context that permits sleeping.
+ * @suspend: Invoked on USB suspend.  May be called in_interrupt.
+ * @resume: Invoked on USB resume.  May be called in_interrupt.
+ * @driver: Driver model state for this driver.
+ *
+ * Devices are disabled till a gadget driver successfully bind()s, which
+ * means the driver will handle setup() requests needed to enumerate (and
+ * meet "chapter 9" requirements) then do some useful work.
+ *
+ * If gadget->is_otg is true, the gadget driver must provide an OTG
+ * descriptor during enumeration, or else fail the bind() call.  In such
+ * cases, no USB traffic may flow until both bind() returns without
+ * having called usb_gadget_disconnect(), and the USB host stack has
+ * initialized.
+ *
+ * Drivers use hardware-specific knowledge to configure the usb hardware.
+ * endpoint addressing is only one of several hardware characteristics that
+ * are in descriptors the ep0 implementation returns from setup() calls.
+ *
+ * Except for ep0 implementation, most driver code shouldn't need change to
+ * run on top of different usb controllers.  It'll use endpoints set up by
+ * that ep0 implementation.
+ *
+ * The usb controller driver handles a few standard usb requests.  Those
+ * include set_address, and feature flags for devices, interfaces, and
+ * endpoints (the get_status, set_feature, and clear_feature requests).
+ *
+ * Accordingly, the driver's setup() callback must always implement all
+ * get_descriptor requests, returning at least a device descriptor and
+ * a configuration descriptor.  Drivers must make sure the endpoint
+ * descriptors match any hardware constraints. Some hardware also constrains
+ * other descriptors. (The pxa250 allows only configurations 1, 2, or 3).
+ *
+ * The driver's setup() callback must also implement set_configuration,
+ * and should also implement set_interface, get_configuration, and
+ * get_interface.  Setting a configuration (or interface) is where
+ * endpoints should be activated or (config 0) shut down.
+ *
+ * (Note that only the default control endpoint is supported.  Neither
+ * hosts nor devices generally support control traffic except to ep0.)
+ *
+ * Most devices will ignore USB suspend/resume operations, and so will
+ * not provide those callbacks.  However, some may need to change modes
+ * when the host is not longer directing those activities.  For example,
+ * local controls (buttons, dials, etc) may need to be re-enabled since
+ * the (remote) host can't do that any longer; or an error state might
+ * be cleared, to make the device behave identically whether or not
+ * power is maintained.
+ */
+struct usb_gadget_driver {
+	char			*function;
+	enum usb_device_speed	speed;
+	int			(*bind)(struct usb_gadget *);
+	void			(*unbind)(struct usb_gadget *);
+	int			(*setup)(struct usb_gadget *,
+					const struct usb_ctrlrequest *);
+	void			(*disconnect)(struct usb_gadget *);
+	void			(*suspend)(struct usb_gadget *);
+	void			(*resume)(struct usb_gadget *);
+
+	// FIXME support safe rmmod
+	struct device_driver	driver;
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver modules register and unregister, as usual.
+ * these calls must be made in a context that can sleep.
+ *
+ * these will usually be implemented directly by the hardware-dependent
+ * usb bus interface driver, which will only support a single driver.
+ */
+
+/**
+ * usb_gadget_register_driver - register a gadget driver
+ * @driver:the driver being registered
+ *
+ * Call this in your gadget driver's module initialization function,
+ * to tell the underlying usb controller driver about your driver.
+ * The driver's bind() function will be called to bind it to a
+ * gadget.  This function must be called in a context that can sleep.
+ */
+int usb_gadget_register_driver (struct usb_gadget_driver *driver);
+
+/**
+ * usb_gadget_unregister_driver - unregister a gadget driver
+ * @driver:the driver being unregistered
+ *
+ * Call this in your gadget driver's module cleanup function,
+ * to tell the underlying usb controller that your driver is
+ * going away.  If the controller is connected to a USB host,
+ * it will first disconnect().  The driver is also requested
+ * to unbind() and clean up any device state, before this procedure
+ * finally returns.
+ * This function must be called in a context that can sleep.
+ */
+int usb_gadget_unregister_driver (struct usb_gadget_driver *driver);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify dealing with string descriptors */
+
+/**
+ * struct usb_string - wraps a C string and its USB id
+ * @id:the (nonzero) ID for this string
+ * @s:the string, in UTF-8 encoding
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap a string
+ * together with its ID.
+ */
+struct usb_string {
+	u8			id;
+	const char		*s;
+};
+
+/**
+ * struct usb_gadget_strings - a set of USB strings in a given language
+ * @language:identifies the strings' language (0x0409 for en-us)
+ * @strings:array of strings with their ids
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap all the
+ * strings for a given language.
+ */
+struct usb_gadget_strings {
+	u16			language;	/* 0x0409 for en-us */
+	struct usb_string	*strings;
+};
+
+/* put descriptor for string with that id into buf (buflen >= 256) */
+int usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify managing config descriptors */
+
+/* write vector of descriptors into buffer */
+int usb_descriptor_fillbuf(void *, unsigned,
+		const struct usb_descriptor_header **);
+
+/* build config descriptor from single descriptor vector */
+int usb_gadget_config_buf(const struct usb_config_descriptor *config,
+	void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility wrapping a simple endpoint selection policy */
+
+extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
+			struct usb_endpoint_descriptor *) __init;
+
+extern void usb_ep_autoconfig_reset (struct usb_gadget *) __init;
+
+#endif  /* __KERNEL__ */
+
+#endif	/* __LINUX_USB_GADGET_H */
diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h
new file mode 100644
index 000000000000..b53d6ae8e55e
--- /dev/null
+++ b/include/linux/usb_gadgetfs.h
@@ -0,0 +1,75 @@
+
+#include <asm/types.h>
+#include <asm/ioctl.h>
+
+#include <linux/usb_ch9.h>
+
+/*
+ * Filesystem based user-mode API to USB Gadget controller hardware
+ *
+ * Almost everything can be done with only read and write operations,
+ * on endpoint files found in one directory.  They are configured by
+ * writing descriptors, and then may be used for normal stream style
+ * i/o requests.  When ep0 is configured, the device can enumerate;
+ * when it's closed, the device disconnects from usb.
+ *
+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+ * which may then be used to read usb_gadgetfs_event structs.  The driver
+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+ * then performing data transfers by reading or writing.
+ */
+
+/*
+ * Events are delivered on the ep0 file descriptor, if the user mode driver
+ * reads from this file descriptor after writing the descriptors.  Don't
+ * stop polling this descriptor, if you write that kind of driver.
+ */
+
+enum usb_gadgetfs_event_type {
+	GADGETFS_NOP = 0,
+
+	GADGETFS_CONNECT,
+	GADGETFS_DISCONNECT,
+	GADGETFS_SETUP,
+	GADGETFS_SUSPEND,
+	// and likely more !
+};
+
+struct usb_gadgetfs_event {
+	enum usb_gadgetfs_event_type	type;
+	union {
+		// NOP, DISCONNECT, SUSPEND: nothing
+		// ... some hardware can't report disconnection
+
+		// CONNECT: just the speed
+		enum usb_device_speed	speed;
+
+		// SETUP: packet; DATA phase i/o precedes next event
+		// (setup.bmRequestType & USB_DIR_IN) flags direction 
+		// ... includes SET_CONFIGURATION, SET_INTERFACE
+		struct usb_ctrlrequest	setup;
+	} u;
+};
+
+
+/* endpoint ioctls */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * 	when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * 	complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define	GADGETFS_FIFO_STATUS	_IO('g',1)
+
+/* discards any unclaimed data in the fifo. */
+#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define	GADGETFS_CLEAR_HALT	_IO('g',3)
+
+
diff --git a/include/linux/usb_otg.h b/include/linux/usb_otg.h
new file mode 100644
index 000000000000..c6683146e9b0
--- /dev/null
+++ b/include/linux/usb_otg.h
@@ -0,0 +1,118 @@
+// include/linux/usb_otg.h 
+
+/*
+ * These APIs may be used between USB controllers.  USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+
+/* OTG defines lots of enumeration states before device reset */
+enum usb_otg_state {
+	OTG_STATE_UNDEFINED = 0,
+
+	/* single-role peripheral, and dual-role default-b */
+	OTG_STATE_B_IDLE,
+	OTG_STATE_B_SRP_INIT,
+	OTG_STATE_B_PERIPHERAL,
+
+	/* extra dual-role default-b states */
+	OTG_STATE_B_WAIT_ACON,
+	OTG_STATE_B_HOST,
+
+	/* dual-role default-a */
+	OTG_STATE_A_IDLE,
+	OTG_STATE_A_WAIT_VRISE,
+	OTG_STATE_A_WAIT_BCON,
+	OTG_STATE_A_HOST,
+	OTG_STATE_A_SUSPEND,
+	OTG_STATE_A_PERIPHERAL,
+	OTG_STATE_A_WAIT_VFALL,
+	OTG_STATE_A_VBUS_ERR,
+};
+
+/*
+ * the otg driver needs to interact with both device side and host side
+ * usb controllers.  it decides which controller is active at a given
+ * moment, using the transceiver, ID signal, HNP and sometimes static
+ * configuration information (including "board isn't wired for otg").
+ */
+struct otg_transceiver {
+	struct device		*dev;
+	const char		*label;
+
+	u8			default_a;
+	enum usb_otg_state	state;
+
+	struct usb_bus		*host;
+	struct usb_gadget	*gadget;
+
+	/* to pass extra port status to the root hub */
+	u16			port_status;
+	u16			port_change;
+
+	/* bind/unbind the host controller */
+	int 	(*set_host)(struct otg_transceiver *otg,
+				struct usb_bus *host);
+
+	/* bind/unbind the peripheral controller */
+	int	(*set_peripheral)(struct otg_transceiver *otg,
+				struct usb_gadget *gadget);
+
+	/* effective for B devices, ignored for A-peripheral */
+	int	(*set_power)(struct otg_transceiver *otg,
+				unsigned mA);
+
+	/* for B devices only:  start session with A-Host */
+	int	(*start_srp)(struct otg_transceiver *otg);
+
+	/* start or continue HNP role switch */
+	int	(*start_hnp)(struct otg_transceiver *otg);
+
+};
+
+
+/* for board-specific init logic */
+extern int otg_set_transceiver(struct otg_transceiver *);
+
+
+/* for usb host and peripheral controller drivers */
+extern struct otg_transceiver *otg_get_transceiver(void);
+
+static inline int
+otg_start_hnp(struct otg_transceiver *otg)
+{
+	return otg->start_hnp(otg);
+}
+
+
+/* for HCDs */
+static inline int
+otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	return otg->set_host(otg, host);
+}
+
+
+/* for usb peripheral controller drivers */
+static inline int
+otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph)
+{
+	return otg->set_peripheral(otg, periph);
+}
+
+static inline int
+otg_set_power(struct otg_transceiver *otg, unsigned mA)
+{
+	return otg->set_power(otg, mA);
+}
+
+static inline int
+otg_start_srp(struct otg_transceiver *otg)
+{
+	return otg->start_srp(otg);
+}
+
+
+/* for OTG controller drivers (and maybe other stuff) */
+extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h
new file mode 100644
index 000000000000..4f2d012d7309
--- /dev/null
+++ b/include/linux/usb_sl811.h
@@ -0,0 +1,26 @@
+
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+struct sl811_platform_data {
+	unsigned	can_wakeup:1;
+
+	/* given port_power, msec/2 after power on till power good */
+	u8		potpg;
+
+	/* mA/2 power supplied on this port (max = default = 250) */
+	u8		power;
+
+	/* sl811 relies on an external source of VBUS current */
+	void 		(*port_power)(struct device *dev, int is_on);
+
+	/* pulse sl811 nRST (probably with a GPIO) */
+	void 		(*reset)(struct device *dev);
+
+	// some boards need something like these:
+ 	// int 		(*check_overcurrent)(struct device *dev);
+ 	// void 	(*clock_enable)(struct device *dev, int is_on);
+};
+
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
new file mode 100644
index 000000000000..fb57c2217468
--- /dev/null
+++ b/include/linux/usbdevice_fs.h
@@ -0,0 +1,168 @@
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ *
+ *  $Id: usbdevice_fs.h,v 1.1 2000/01/06 18:40:41 tom Exp $
+ */
+
+/*****************************************************************************/
+
+#ifndef _LINUX_USBDEVICE_FS_H
+#define _LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/compat.h>
+
+/* --------------------------------------------------------------------- */
+
+#define USBDEVICE_SUPER_MAGIC 0x9fa2
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK          1
+#define USBDEVFS_URB_ISO_ASAP              2
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	int number_of_packets;
+	int error_count;
+	unsigned int signr;  /* signal to be sent on error, -1 if none should be sent */
+	void *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+#ifdef CONFIG_COMPAT
+struct usbdevfs_urb32 {
+	unsigned char type;
+	unsigned char endpoint;
+	compat_int_t status;
+	compat_uint_t flags;
+	compat_caddr_t buffer;
+	compat_int_t buffer_length;
+	compat_int_t actual_length;
+	compat_int_t start_frame;
+	compat_int_t number_of_packets;
+	compat_int_t error_count;
+	compat_uint_t signr;
+	compat_caddr_t usercontext; /* unused */
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+#endif
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/user.h b/include/linux/user.h
new file mode 100644
index 000000000000..68daf840f6c8
--- /dev/null
+++ b/include/linux/user.h
@@ -0,0 +1 @@
+#include <asm/user.h>
diff --git a/include/linux/utime.h b/include/linux/utime.h
new file mode 100644
index 000000000000..c6bf27b7897e
--- /dev/null
+++ b/include/linux/utime.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_UTIME_H
+#define _LINUX_UTIME_H
+
+struct utimbuf {
+	time_t actime;
+	time_t modtime;
+};
+
+#endif
diff --git a/include/linux/uts.h b/include/linux/uts.h
new file mode 100644
index 000000000000..73eb1ed36ec4
--- /dev/null
+++ b/include/linux/uts.h
@@ -0,0 +1,19 @@
+#ifndef _LINUX_UTS_H
+#define _LINUX_UTS_H
+
+/*
+ * Defines for what uname() should return 
+ */
+#ifndef UTS_SYSNAME
+#define UTS_SYSNAME "Linux"
+#endif
+
+#ifndef UTS_NODENAME
+#define UTS_NODENAME "(none)"	/* set by sethostname() */
+#endif
+
+#ifndef UTS_DOMAINNAME
+#define UTS_DOMAINNAME "(none)"	/* set by setdomainname() */
+#endif
+
+#endif
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
new file mode 100644
index 000000000000..13e1da0c538d
--- /dev/null
+++ b/include/linux/utsname.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UTSNAME_H
+#define _LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+	char sysname[9];
+	char nodename[9];
+	char release[9];
+	char version[9];
+	char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+};
+
+struct new_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+	char domainname[65];
+};
+
+extern struct new_utsname system_utsname;
+
+extern struct rw_semaphore uts_sem;
+#endif
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
new file mode 100644
index 000000000000..fadc535e2925
--- /dev/null
+++ b/include/linux/vermagic.h
@@ -0,0 +1,23 @@
+#include <linux/version.h>
+#include <linux/module.h>
+
+/* Simply sanity version stamp for modules. */
+#ifdef CONFIG_SMP
+#define MODULE_VERMAGIC_SMP "SMP "
+#else
+#define MODULE_VERMAGIC_SMP ""
+#endif
+#ifdef CONFIG_PREEMPT
+#define MODULE_VERMAGIC_PREEMPT "preempt "
+#else
+#define MODULE_VERMAGIC_PREEMPT ""
+#endif
+#ifndef MODULE_ARCH_VERMAGIC
+#define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#define VERMAGIC_STRING 						\
+	UTS_RELEASE " "							\
+	MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT 			\
+	MODULE_ARCH_VERMAGIC 						\
+	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
diff --git a/include/linux/vfs.h b/include/linux/vfs.h
new file mode 100644
index 000000000000..e701d0541405
--- /dev/null
+++ b/include/linux/vfs.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_VFS_H
+#define _LINUX_VFS_H
+
+#include <linux/statfs.h>
+
+#endif
diff --git a/include/linux/via.h b/include/linux/via.h
new file mode 100644
index 000000000000..86ae3bcdb2ba
--- /dev/null
+++ b/include/linux/via.h
@@ -0,0 +1,22 @@
+/* Miscellaneous definitions for VIA chipsets
+   Currently used only by drivers/parport/parport_pc.c */
+
+/* Values for SuperIO function select configuration register */
+#define VIA_FUNCTION_PARPORT_SPP     0x00
+#define VIA_FUNCTION_PARPORT_ECP     0x01
+#define VIA_FUNCTION_PARPORT_EPP     0x02
+#define VIA_FUNCTION_PARPORT_DISABLE 0x03
+#define VIA_FUNCTION_PROBE           0xFF /* Special magic value to be used in code, not to be written into chip */
+
+/* Bits for parallel port mode configuration register */
+#define VIA_PARPORT_ECPEPP 0X20
+#define VIA_PARPORT_BIDIR  0x80
+
+/* VIA configuration registers */
+#define VIA_CONFIG_INDEX 0x3F0
+#define VIA_CONFIG_DATA  0x3F1
+
+/* Mask for parallel port IRQ bits (in ISA PnP IRQ routing register 1) */
+#define VIA_IRQCONTROL_PARALLEL 0xF0
+/* Mask for parallel port DMA bits (in ISA PnP DMA routing register) */
+#define VIA_DMACONTROL_PARALLEL 0x0C
diff --git a/include/linux/video_decoder.h b/include/linux/video_decoder.h
new file mode 100644
index 000000000000..0e9e48b83e3b
--- /dev/null
+++ b/include/linux/video_decoder.h
@@ -0,0 +1,44 @@
+#ifndef _LINUX_VIDEO_DECODER_H
+#define _LINUX_VIDEO_DECODER_H
+
+struct video_decoder_capability { /* this name is too long */
+	__u32	flags;
+#define	VIDEO_DECODER_PAL	1	/* can decode PAL signal */
+#define	VIDEO_DECODER_NTSC	2	/* can decode NTSC */
+#define	VIDEO_DECODER_SECAM	4	/* can decode SECAM */
+#define	VIDEO_DECODER_AUTO	8	/* can autosense norm */
+#define	VIDEO_DECODER_CCIR	16	/* CCIR-601 pixel rate (720 pixels per line) instead of square pixel rate */
+	int	inputs;			/* number of inputs */
+	int	outputs;		/* number of outputs */
+};
+
+/*
+DECODER_GET_STATUS returns the following flags.  The only one you need is
+DECODER_STATUS_GOOD, the others are just nice things to know.
+*/
+#define	DECODER_STATUS_GOOD	1	/* receiving acceptable input */
+#define	DECODER_STATUS_COLOR	2	/* receiving color information */
+#define	DECODER_STATUS_PAL	4	/* auto detected */
+#define	DECODER_STATUS_NTSC	8	/* auto detected */
+#define	DECODER_STATUS_SECAM	16	/* auto detected */
+
+struct video_decoder_init {
+	unsigned char len;
+	const unsigned char *data;
+};
+
+#define	DECODER_GET_CAPABILITIES _IOR('d', 1, struct video_decoder_capability)
+#define	DECODER_GET_STATUS    	_IOR('d', 2, int)
+#define	DECODER_SET_NORM	_IOW('d', 3, int)
+#define	DECODER_SET_INPUT	_IOW('d', 4, int)	/* 0 <= input < #inputs */
+#define	DECODER_SET_OUTPUT	_IOW('d', 5, int)	/* 0 <= output < #outputs */
+#define	DECODER_ENABLE_OUTPUT	_IOW('d', 6, int)	/* boolean output enable control */
+#define	DECODER_SET_PICTURE   	_IOW('d', 7, struct video_picture)
+#define	DECODER_SET_GPIO	_IOW('d', 8, int)	/* switch general purpose pin */
+#define	DECODER_INIT		_IOW('d', 9, struct video_decoder_init)	/* init internal registers at once */
+#define	DECODER_SET_VBI_BYPASS	_IOW('d', 10, int)	/* switch vbi bypass */
+
+#define	DECODER_DUMP		_IO('d', 192)		/* debug hook */
+
+
+#endif
diff --git a/include/linux/video_encoder.h b/include/linux/video_encoder.h
new file mode 100644
index 000000000000..4b0e6907a7b4
--- /dev/null
+++ b/include/linux/video_encoder.h
@@ -0,0 +1,21 @@
+#ifndef _LINUX_VIDEO_ENCODER_H
+#define _LINUX_VIDEO_ENCODER_H
+
+struct video_encoder_capability { /* this name is too long */
+	__u32	flags;
+#define	VIDEO_ENCODER_PAL	1	/* can encode PAL signal */
+#define	VIDEO_ENCODER_NTSC	2	/* can encode NTSC */
+#define	VIDEO_ENCODER_SECAM	4	/* can encode SECAM */
+#define	VIDEO_ENCODER_CCIR	16	/* CCIR-601 pixel rate (720 pixels per line) instead of square pixel rate */
+	int	inputs;			/* number of inputs */
+	int	outputs;		/* number of outputs */
+};
+
+#define	ENCODER_GET_CAPABILITIES _IOR('e', 1, struct video_encoder_capability)
+#define	ENCODER_SET_NORM	_IOW('e', 2, int)
+#define	ENCODER_SET_INPUT	_IOW('e', 3, int)	/* 0 <= input < #inputs */
+#define	ENCODER_SET_OUTPUT	_IOW('e', 4, int)	/* 0 <= output < #outputs */
+#define	ENCODER_ENABLE_OUTPUT	_IOW('e', 5, int)	/* boolean output enable control */
+
+
+#endif
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
new file mode 100644
index 000000000000..9d6fbde3d29c
--- /dev/null
+++ b/include/linux/videodev.h
@@ -0,0 +1,443 @@
+#ifndef __LINUX_VIDEODEV_H
+#define __LINUX_VIDEODEV_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+#define HAVE_V4L2 1
+#include <linux/videodev2.h>
+
+#ifdef __KERNEL__
+
+#include <linux/poll.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+
+struct video_device
+{
+	/* device info */
+	struct device *dev;
+	char name[32];
+	int type;       /* v4l1 */
+	int type2;      /* v4l2 */
+	int hardware;
+	int minor;
+
+	/* device ops + callbacks */
+	struct file_operations *fops;
+	void (*release)(struct video_device *vfd);
+
+
+#if 1 /* to be removed in 2.7.x */
+	/* obsolete -- fops->owner is used instead */
+	struct module *owner;
+	/* dev->driver_data will be used instead some day.
+	 * Use the video_{get|set}_drvdata() helper functions,
+	 * so the switch over will be transparent for you.
+	 * Or use {pci|usb}_{get|set}_drvdata() directly. */
+	void *priv;
+#endif
+
+	/* for videodev.c intenal usage -- please don't touch */
+	int users;                     /* video_exclusive_{open|close} ... */
+	struct semaphore lock;         /* ... helper function uses these   */
+	char devfs_name[64];           /* devfs */
+	struct class_device class_dev; /* sysfs */
+};
+
+#define VIDEO_MAJOR	81
+
+#define VFL_TYPE_GRABBER	0
+#define VFL_TYPE_VBI		1
+#define VFL_TYPE_RADIO		2
+#define VFL_TYPE_VTX		3
+
+extern int video_register_device(struct video_device *, int type, int nr);
+extern void video_unregister_device(struct video_device *);
+extern struct video_device* video_devdata(struct file*);
+
+#define to_video_device(cd) container_of(cd, struct video_device, class_dev)
+static inline void
+video_device_create_file(struct video_device *vfd,
+			 struct class_device_attribute *attr)
+{
+	class_device_create_file(&vfd->class_dev, attr);
+}
+static inline void
+video_device_remove_file(struct video_device *vfd,
+			 struct class_device_attribute *attr)
+{
+	class_device_remove_file(&vfd->class_dev, attr);
+}
+
+/* helper functions to alloc / release struct video_device, the
+   later can be used for video_device->release() */
+struct video_device *video_device_alloc(void);
+void video_device_release(struct video_device *vfd);
+
+/* helper functions to access driver private data. */
+static inline void *video_get_drvdata(struct video_device *dev)
+{
+	return dev->priv;
+}
+
+static inline void video_set_drvdata(struct video_device *dev, void *data)
+{
+	dev->priv = data;
+}
+
+extern int video_exclusive_open(struct inode *inode, struct file *file);
+extern int video_exclusive_release(struct inode *inode, struct file *file);
+extern int video_usercopy(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg,
+			  int (*func)(struct inode *inode, struct file *file,
+				      unsigned int cmd, void *arg));
+#endif /* __KERNEL__ */
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+
+struct video_capability
+{
+	char name[32];
+	int type;
+	int channels;	/* Num channels */
+	int audios;	/* Num audio devices */
+	int maxwidth;	/* Supported width */
+	int maxheight;	/* And height */
+	int minwidth;	/* Supported width */
+	int minheight;	/* And height */
+};
+
+
+struct video_channel
+{
+	int channel;
+	char name[32];
+	int tuners;
+	__u32  flags;
+#define VIDEO_VC_TUNER		1	/* Channel has a tuner */
+#define VIDEO_VC_AUDIO		2	/* Channel has audio */
+	__u16  type;
+#define VIDEO_TYPE_TV		1
+#define VIDEO_TYPE_CAMERA	2
+	__u16 norm;			/* Norm set by channel */
+};
+
+struct video_tuner
+{
+	int tuner;
+	char name[32];
+	unsigned long rangelow, rangehigh;	/* Tuner range */
+	__u32 flags;
+#define VIDEO_TUNER_PAL		1
+#define VIDEO_TUNER_NTSC	2
+#define VIDEO_TUNER_SECAM	4
+#define VIDEO_TUNER_LOW		8	/* Uses KHz not MHz */
+#define VIDEO_TUNER_NORM	16	/* Tuner can set norm */
+#define VIDEO_TUNER_STEREO_ON	128	/* Tuner is seeing stereo */
+#define VIDEO_TUNER_RDS_ON      256     /* Tuner is seeing an RDS datastream */
+#define VIDEO_TUNER_MBS_ON      512     /* Tuner is seeing an MBS datastream */
+	__u16 mode;			/* PAL/NTSC/SECAM/OTHER */
+#define VIDEO_MODE_PAL		0
+#define VIDEO_MODE_NTSC		1
+#define VIDEO_MODE_SECAM	2
+#define VIDEO_MODE_AUTO		3
+	__u16 signal;			/* Signal strength 16bit scale */
+};
+
+struct video_picture
+{
+	__u16	brightness;
+	__u16	hue;
+	__u16	colour;
+	__u16	contrast;
+	__u16	whiteness;	/* Black and white only */
+	__u16	depth;		/* Capture depth */
+	__u16   palette;	/* Palette in use */
+#define VIDEO_PALETTE_GREY	1	/* Linear greyscale */
+#define VIDEO_PALETTE_HI240	2	/* High 240 cube (BT848) */
+#define VIDEO_PALETTE_RGB565	3	/* 565 16 bit RGB */
+#define VIDEO_PALETTE_RGB24	4	/* 24bit RGB */
+#define VIDEO_PALETTE_RGB32	5	/* 32bit RGB */
+#define VIDEO_PALETTE_RGB555	6	/* 555 15bit RGB */
+#define VIDEO_PALETTE_YUV422	7	/* YUV422 capture */
+#define VIDEO_PALETTE_YUYV	8
+#define VIDEO_PALETTE_UYVY	9	/* The great thing about standards is ... */
+#define VIDEO_PALETTE_YUV420	10
+#define VIDEO_PALETTE_YUV411	11	/* YUV411 capture */
+#define VIDEO_PALETTE_RAW	12	/* RAW capture (BT848) */
+#define VIDEO_PALETTE_YUV422P	13	/* YUV 4:2:2 Planar */
+#define VIDEO_PALETTE_YUV411P	14	/* YUV 4:1:1 Planar */
+#define VIDEO_PALETTE_YUV420P	15	/* YUV 4:2:0 Planar */
+#define VIDEO_PALETTE_YUV410P	16	/* YUV 4:1:0 Planar */
+#define VIDEO_PALETTE_PLANAR	13	/* start of planar entries */
+#define VIDEO_PALETTE_COMPONENT 7	/* start of component entries */
+};
+
+struct video_audio
+{
+	int	audio;		/* Audio channel */
+	__u16	volume;		/* If settable */
+	__u16	bass, treble;
+	__u32	flags;
+#define VIDEO_AUDIO_MUTE	1
+#define VIDEO_AUDIO_MUTABLE	2
+#define VIDEO_AUDIO_VOLUME	4
+#define VIDEO_AUDIO_BASS	8
+#define VIDEO_AUDIO_TREBLE	16
+#define VIDEO_AUDIO_BALANCE	32
+	char    name[16];
+#define VIDEO_SOUND_MONO	1
+#define VIDEO_SOUND_STEREO	2
+#define VIDEO_SOUND_LANG1	4
+#define VIDEO_SOUND_LANG2	8
+        __u16   mode;
+        __u16	balance;	/* Stereo balance */
+        __u16	step;		/* Step actual volume uses */
+};
+
+struct video_clip
+{
+	__s32	x,y;
+	__s32	width, height;
+	struct	video_clip *next;	/* For user use/driver use only */
+};
+
+struct video_window
+{
+	__u32	x,y;			/* Position of window */
+	__u32	width,height;		/* Its size */
+	__u32	chromakey;
+	__u32	flags;
+	struct	video_clip __user *clips;	/* Set only */
+	int	clipcount;
+#define VIDEO_WINDOW_INTERLACE	1
+#define VIDEO_WINDOW_CHROMAKEY	16	/* Overlay by chromakey */
+#define VIDEO_CLIP_BITMAP	-1
+/* bitmap is 1024x625, a '1' bit represents a clipped pixel */
+#define VIDEO_CLIPMAP_SIZE	(128 * 625)
+};
+
+struct video_capture
+{
+	__u32 	x,y;			/* Offsets into image */
+	__u32	width, height;		/* Area to capture */
+	__u16	decimation;		/* Decimation divider */
+	__u16	flags;			/* Flags for capture */
+#define VIDEO_CAPTURE_ODD		0	/* Temporal */
+#define VIDEO_CAPTURE_EVEN		1
+};
+
+struct video_buffer
+{
+	void	*base;
+	int	height,width;
+	int	depth;
+	int	bytesperline;
+};
+
+struct video_mmap
+{
+	unsigned	int frame;		/* Frame (0 - n) for double buffer */
+	int		height,width;
+	unsigned	int format;		/* should be VIDEO_PALETTE_* */
+};
+
+struct video_key
+{
+	__u8	key[8];
+	__u32	flags;
+};
+
+
+#define VIDEO_MAX_FRAME		32
+
+struct video_mbuf
+{
+	int	size;		/* Total memory to map */
+	int	frames;		/* Frames */
+	int	offsets[VIDEO_MAX_FRAME];
+};
+
+
+#define 	VIDEO_NO_UNIT	(-1)
+
+
+struct video_unit
+{
+	int 	video;		/* Video minor */
+	int	vbi;		/* VBI minor */
+	int	radio;		/* Radio minor */
+	int	audio;		/* Audio minor */
+	int	teletext;	/* Teletext minor */
+};
+
+struct vbi_format {
+	__u32	sampling_rate;	/* in Hz */
+	__u32	samples_per_line;
+	__u32	sample_format;	/* VIDEO_PALETTE_RAW only (1 byte) */
+	__s32	start[2];	/* starting line for each frame */
+	__u32	count[2];	/* count of lines for each frame */
+	__u32	flags;
+#define	VBI_UNSYNC	1	/* can distingues between top/bottom field */
+#define	VBI_INTERLACED	2	/* lines are interlaced */
+};
+
+/* video_info is biased towards hardware mpeg encode/decode */
+/* but it could apply generically to any hardware compressor/decompressor */
+struct video_info
+{
+	__u32	frame_count;	/* frames output since decode/encode began */
+	__u32	h_size;		/* current unscaled horizontal size */
+	__u32	v_size;		/* current unscaled veritcal size */
+	__u32	smpte_timecode;	/* current SMPTE timecode (for current GOP) */
+	__u32	picture_type;	/* current picture type */
+	__u32	temporal_reference;	/* current temporal reference */
+	__u8	user_data[256];	/* user data last found in compressed stream */
+	/* user_data[0] contains user data flags, user_data[1] has count */
+};
+
+/* generic structure for setting playback modes */
+struct video_play_mode
+{
+	int	mode;
+	int	p1;
+	int	p2;
+};
+
+/* for loading microcode / fpga programming */
+struct video_code
+{
+	char	loadwhat[16];	/* name or tag of file being passed */
+	int	datasize;
+	__u8	*data;
+};
+
+#define VIDIOCGCAP		_IOR('v',1,struct video_capability)	/* Get capabilities */
+#define VIDIOCGCHAN		_IOWR('v',2,struct video_channel)	/* Get channel info (sources) */
+#define VIDIOCSCHAN		_IOW('v',3,struct video_channel)	/* Set channel 	*/
+#define VIDIOCGTUNER		_IOWR('v',4,struct video_tuner)		/* Get tuner abilities */
+#define VIDIOCSTUNER		_IOW('v',5,struct video_tuner)		/* Tune the tuner for the current channel */
+#define VIDIOCGPICT		_IOR('v',6,struct video_picture)	/* Get picture properties */
+#define VIDIOCSPICT		_IOW('v',7,struct video_picture)	/* Set picture properties */
+#define VIDIOCCAPTURE		_IOW('v',8,int)				/* Start, end capture */
+#define VIDIOCGWIN		_IOR('v',9, struct video_window)	/* Get the video overlay window */
+#define VIDIOCSWIN		_IOW('v',10, struct video_window)	/* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */
+#define VIDIOCGFBUF		_IOR('v',11, struct video_buffer)	/* Get frame buffer */
+#define VIDIOCSFBUF		_IOW('v',12, struct video_buffer)	/* Set frame buffer - root only */
+#define VIDIOCKEY		_IOR('v',13, struct video_key)		/* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */
+#define VIDIOCGFREQ		_IOR('v',14, unsigned long)		/* Set tuner */
+#define VIDIOCSFREQ		_IOW('v',15, unsigned long)		/* Set tuner */
+#define VIDIOCGAUDIO		_IOR('v',16, struct video_audio)	/* Get audio info */
+#define VIDIOCSAUDIO		_IOW('v',17, struct video_audio)	/* Audio source, mute etc */
+#define VIDIOCSYNC		_IOW('v',18, int)			/* Sync with mmap grabbing */
+#define VIDIOCMCAPTURE		_IOW('v',19, struct video_mmap)		/* Grab frames */
+#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
+#define VIDIOCGUNIT		_IOR('v',21, struct video_unit)		/* Get attached units */
+#define VIDIOCGCAPTURE		_IOR('v',22, struct video_capture)	/* Get subcapture */
+#define VIDIOCSCAPTURE		_IOW('v',23, struct video_capture)	/* Set subcapture */
+#define VIDIOCSPLAYMODE		_IOW('v',24, struct video_play_mode)	/* Set output video mode/feature */
+#define VIDIOCSWRITEMODE	_IOW('v',25, int)			/* Set write mode */
+#define VIDIOCGPLAYINFO		_IOR('v',26, struct video_info)		/* Get current playback info from hardware */
+#define VIDIOCSMICROCODE	_IOW('v',27, struct video_code)		/* Load microcode into hardware */
+#define	VIDIOCGVBIFMT		_IOR('v',28, struct vbi_format)		/* Get VBI information */
+#define	VIDIOCSVBIFMT		_IOW('v',29, struct vbi_format)		/* Set VBI information */
+
+
+#define BASE_VIDIOCPRIVATE	192		/* 192-255 are private */
+
+/* VIDIOCSWRITEMODE */
+#define VID_WRITE_MPEG_AUD		0
+#define VID_WRITE_MPEG_VID		1
+#define VID_WRITE_OSD			2
+#define VID_WRITE_TTX			3
+#define VID_WRITE_CC			4
+#define VID_WRITE_MJPEG			5
+
+/* VIDIOCSPLAYMODE */
+#define VID_PLAY_VID_OUT_MODE		0
+	/* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */
+#define VID_PLAY_GENLOCK		1
+	/* p1: 0 = OFF, 1 = ON */
+	/* p2: GENLOCK FINE DELAY value */
+#define VID_PLAY_NORMAL			2
+#define VID_PLAY_PAUSE			3
+#define VID_PLAY_SINGLE_FRAME		4
+#define VID_PLAY_FAST_FORWARD		5
+#define VID_PLAY_SLOW_MOTION		6
+#define VID_PLAY_IMMEDIATE_NORMAL	7
+#define VID_PLAY_SWITCH_CHANNELS	8
+#define VID_PLAY_FREEZE_FRAME		9
+#define VID_PLAY_STILL_MODE		10
+#define VID_PLAY_MASTER_MODE		11
+	/* p1: see below */
+#define		VID_PLAY_MASTER_NONE	1
+#define		VID_PLAY_MASTER_VIDEO	2
+#define		VID_PLAY_MASTER_AUDIO	3
+#define VID_PLAY_ACTIVE_SCANLINES	12
+	/* p1 = first active; p2 = last active */
+#define VID_PLAY_RESET			13
+#define VID_PLAY_END_MARK		14
+
+
+
+#define VID_HARDWARE_BT848	1
+#define VID_HARDWARE_QCAM_BW	2
+#define VID_HARDWARE_PMS	3
+#define VID_HARDWARE_QCAM_C	4
+#define VID_HARDWARE_PSEUDO	5
+#define VID_HARDWARE_SAA5249	6
+#define VID_HARDWARE_AZTECH	7
+#define VID_HARDWARE_SF16MI	8
+#define VID_HARDWARE_RTRACK	9
+#define VID_HARDWARE_ZOLTRIX	10
+#define VID_HARDWARE_SAA7146    11
+#define VID_HARDWARE_VIDEUM	12	/* Reserved for Winnov videum */
+#define VID_HARDWARE_RTRACK2	13
+#define VID_HARDWARE_PERMEDIA2	14	/* Reserved for Permedia2 */
+#define VID_HARDWARE_RIVA128	15	/* Reserved for RIVA 128 */
+#define VID_HARDWARE_PLANB	16	/* PowerMac motherboard video-in */
+#define VID_HARDWARE_BROADWAY	17	/* Broadway project */
+#define VID_HARDWARE_GEMTEK	18
+#define VID_HARDWARE_TYPHOON	19
+#define VID_HARDWARE_VINO	20	/* SGI Indy Vino */
+#define VID_HARDWARE_CADET	21	/* Cadet radio */
+#define VID_HARDWARE_TRUST	22	/* Trust FM Radio */
+#define VID_HARDWARE_TERRATEC	23	/* TerraTec ActiveRadio */
+#define VID_HARDWARE_CPIA	24
+#define VID_HARDWARE_ZR36120	25	/* Zoran ZR36120/ZR36125 */
+#define VID_HARDWARE_ZR36067	26	/* Zoran ZR36067/36060 */
+#define VID_HARDWARE_OV511	27
+#define VID_HARDWARE_ZR356700	28	/* Zoran 36700 series */
+#define VID_HARDWARE_W9966	29
+#define VID_HARDWARE_SE401	30	/* SE401 USB webcams */
+#define VID_HARDWARE_PWC	31	/* Philips webcams */
+#define VID_HARDWARE_MEYE	32	/* Sony Vaio MotionEye cameras */
+#define VID_HARDWARE_CPIA2	33
+#define VID_HARDWARE_VICAM      34
+#define VID_HARDWARE_SF16FMR2	35
+#define VID_HARDWARE_W9968CF	36
+#define VID_HARDWARE_SAA7114H   37
+#define VID_HARDWARE_SN9C102	38
+#define VID_HARDWARE_ARV	39
+#endif /* __LINUX_VIDEODEV_H */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
new file mode 100644
index 000000000000..4e0edce53760
--- /dev/null
+++ b/include/linux/videodev2.h
@@ -0,0 +1,977 @@
+#ifndef __LINUX_VIDEODEV2_H
+#define __LINUX_VIDEODEV2_H
+/*
+ *	Video for Linux Two
+ *
+ *	Header file for v4l or V4L2 drivers and applications, for
+ *	Linux kernels 2.2.x or 2.4.x.
+ *
+ *	See http://bytesex.org/v4l/ for API specs and other
+ *	v4l2 documentation.
+ *
+ *	Author: Bill Dirks <bdirks@pacbell.net>
+ *		Justin Schoeman
+ *		et al.
+ */
+#ifdef __KERNEL__
+#include <linux/time.h> /* need struct timeval */
+#endif
+#include <linux/compiler.h> /* need __user */
+
+/*
+ *	M I S C E L L A N E O U S
+ */
+
+/*  Four-character-code (FOURCC) */
+#define v4l2_fourcc(a,b,c,d)\
+        (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+
+/*
+ *	E N U M S
+ */
+enum v4l2_field {
+	V4L2_FIELD_ANY        = 0, /* driver can choose from none,
+				      top, bottom, interlaced
+				      depending on whatever it thinks
+				      is approximate ... */
+	V4L2_FIELD_NONE       = 1, /* this device has no fields ... */
+	V4L2_FIELD_TOP        = 2, /* top field only */
+	V4L2_FIELD_BOTTOM     = 3, /* bottom field only */
+	V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */
+	V4L2_FIELD_SEQ_TB     = 5, /* both fields sequential into one
+				      buffer, top-bottom order */
+	V4L2_FIELD_SEQ_BT     = 6, /* same as above + bottom-top order */
+	V4L2_FIELD_ALTERNATE  = 7, /* both fields alternating into
+				      separate buffers */
+};
+#define V4L2_FIELD_HAS_TOP(field)	\
+	((field) == V4L2_FIELD_TOP 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field)	\
+	((field) == V4L2_FIELD_BOTTOM 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field)	\
+	((field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+	V4L2_BUF_TYPE_VIDEO_CAPTURE  = 1,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT   = 2,
+	V4L2_BUF_TYPE_VIDEO_OVERLAY  = 3,
+	V4L2_BUF_TYPE_VBI_CAPTURE    = 4,
+	V4L2_BUF_TYPE_VBI_OUTPUT     = 5,
+	V4L2_BUF_TYPE_PRIVATE        = 0x80,
+};
+
+enum v4l2_ctrl_type {
+	V4L2_CTRL_TYPE_INTEGER	     = 1,
+	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
+	V4L2_CTRL_TYPE_MENU	     = 3,
+	V4L2_CTRL_TYPE_BUTTON	     = 4,
+};
+
+enum v4l2_tuner_type {
+	V4L2_TUNER_RADIO	     = 1,
+	V4L2_TUNER_ANALOG_TV	     = 2,
+	V4L2_TUNER_DIGITAL_TV	     = 3,
+};
+
+enum v4l2_memory {
+	V4L2_MEMORY_MMAP             = 1,
+	V4L2_MEMORY_USERPTR          = 2,
+	V4L2_MEMORY_OVERLAY          = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+	/* ITU-R 601 -- broadcast NTSC/PAL */
+	V4L2_COLORSPACE_SMPTE170M     = 1,
+
+	/* 1125-Line (US) HDTV */
+	V4L2_COLORSPACE_SMPTE240M     = 2,
+
+	/* HD and modern captures. */
+	V4L2_COLORSPACE_REC709        = 3,
+
+	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+	V4L2_COLORSPACE_BT878         = 4,
+
+	/* These should be useful.  Assume 601 extents. */
+	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
+	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+	/* I know there will be cameras that send this.  So, this is
+	 * unspecified chromaticities and full 0-255 on each of the
+	 * Y'CbCr components
+	 */
+	V4L2_COLORSPACE_JPEG          = 7,
+
+	/* For RGB colourspaces, this is probably a good start. */
+	V4L2_COLORSPACE_SRGB          = 8,
+};
+
+enum v4l2_priority {
+	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
+	V4L2_PRIORITY_BACKGROUND  = 1,
+	V4L2_PRIORITY_INTERACTIVE = 2,
+	V4L2_PRIORITY_RECORD      = 3,
+	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+	__s32   left;
+	__s32   top;
+	__s32   width;
+	__s32   height;
+};
+
+struct v4l2_fract {
+	__u32   numerator;
+	__u32   denominator;
+};
+
+/*
+ *	D R I V E R   C A P A B I L I T I E S
+ */
+struct v4l2_capability
+{
+	__u8	driver[16];	/* i.e. "bttv" */
+	__u8	card[32];	/* i.e. "Hauppauge WinTV" */
+	__u8	bus_info[32];	/* "PCI:" + pci_name(pci_dev) */
+	__u32   version;        /* should use KERNEL_VERSION() */
+	__u32	capabilities;	/* Device capabilities */
+	__u32	reserved[4];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE	0x00000001  /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT	0x00000002  /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY	0x00000004  /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE	0x00000010  /* Is a VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT	0x00000020  /* Is a VBI output device */
+#define V4L2_CAP_RDS_CAPTURE	0x00000100  /* RDS data capture */
+
+#define V4L2_CAP_TUNER		0x00010000  /* has a tuner */
+#define V4L2_CAP_AUDIO		0x00020000  /* has audio support */
+#define V4L2_CAP_RADIO		0x00040000  /* is a radio device */
+
+#define V4L2_CAP_READWRITE      0x01000000  /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO        0x02000000  /* async I/O */
+#define V4L2_CAP_STREAMING      0x04000000  /* streaming I/O ioctls */
+
+/*
+ *	V I D E O   I M A G E   F O R M A T
+ */
+
+struct v4l2_pix_format
+{
+	__u32         	 	width;
+	__u32	         	height;
+	__u32	         	pixelformat;
+	enum v4l2_field  	field;
+	__u32            	bytesperline;	/* for padding, zero if unused */
+	__u32          	 	sizeimage;
+        enum v4l2_colorspace	colorspace;
+	__u32			priv;		/* private data, depends on pixelformat */
+};
+
+/*           Pixel format    FOURCC                  depth  Description   */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B','G','R','3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R','G','B','3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U','Y','V','Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
+
+/* two planes -- one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N','V','2','1') /* 12  Y/CrCb 4:2:0  */
+
+/*  The following formats are not defined in the V4L2 specification */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y','U','V','9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y','U','1','2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
+
+/* see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J','P','E','G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d','v','s','d') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M','P','E','G') /* MPEG          */
+
+/*  Vendor-specific formats   */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
+
+/*
+ *	F O R M A T   E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc
+{
+	__u32	            index;             /* Format number      */
+	enum v4l2_buf_type  type;              /* buffer type        */
+	__u32               flags;
+	__u8	            description[32];   /* Description string */
+	__u32	            pixelformat;       /* Format fourcc      */
+	__u32	            reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+
+
+/*
+ *	T I M E C O D E
+ */
+struct v4l2_timecode
+{
+	__u32	type;
+	__u32	flags;
+	__u8	frames;
+	__u8	seconds;
+	__u8	minutes;
+	__u8	hours;
+	__u8	userbits[4];
+};
+
+/*  Type  */
+#define V4L2_TC_TYPE_24FPS		1
+#define V4L2_TC_TYPE_25FPS		2
+#define V4L2_TC_TYPE_30FPS		3
+#define V4L2_TC_TYPE_50FPS		4
+#define V4L2_TC_TYPE_60FPS		5
+
+/*  Flags  */
+#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME		0x0002
+#define V4L2_TC_USERBITS_field		0x000C
+#define V4L2_TC_USERBITS_USERDEFINED	0x0000
+#define V4L2_TC_USERBITS_8BITCHARS	0x0008
+/* The above is based on SMPTE timecodes */
+
+
+#if 1
+/*
+ *	M P E G   C O M P R E S S I O N   P A R A M E T E R S
+ *
+ *  ### WARNING: this is still work-in-progress right now, most likely
+ *  ###          there will be some incompatible changes.
+ *
+ */
+
+
+enum v4l2_bitrate_mode {
+	V4L2_BITRATE_NONE = 0,	/* not specified */
+	V4L2_BITRATE_CBR,	/* constant bitrate */
+	V4L2_BITRATE_VBR,	/* variable bitrate */
+};
+struct v4l2_bitrate {
+	/* rates are specified in kbit/sec */
+	enum v4l2_bitrate_mode	mode;
+	__u32			min;
+	__u32			target;  /* use this one for CBR */
+	__u32			max;
+};
+
+enum v4l2_mpeg_streamtype {
+	V4L2_MPEG_SS_1,		/* MPEG-1 system stream */
+	V4L2_MPEG_PS_2,		/* MPEG-2 program stream */
+	V4L2_MPEG_TS_2,		/* MPEG-2 transport stream */
+	V4L2_MPEG_PS_DVD,      	/* MPEG-2 program stream with DVD header fixups */
+};
+enum v4l2_mpeg_audiotype {
+	V4L2_MPEG_AU_2_I,	/* MPEG-2 layer 1 */
+	V4L2_MPEG_AU_2_II,	/* MPEG-2 layer 2 */
+	V4L2_MPEG_AU_2_III,	/* MPEG-2 layer 3 */
+	V4L2_MPEG_AC3,		/* AC3 */
+	V4L2_MPEG_LPCM,		/* LPCM */
+};
+enum v4l2_mpeg_videotype {
+	V4L2_MPEG_VI_1,		/* MPEG-1 */
+	V4L2_MPEG_VI_2,		/* MPEG-2 */
+};
+enum v4l2_mpeg_aspectratio {
+	V4L2_MPEG_ASPECT_SQUARE = 1,   /* square pixel */
+	V4L2_MPEG_ASPECT_4_3    = 2,   /*  4 : 3       */
+	V4L2_MPEG_ASPECT_16_9   = 3,   /* 16 : 9       */
+	V4L2_MPEG_ASPECT_1_221  = 4,   /*  1 : 2,21    */
+};
+
+struct v4l2_mpeg_compression {
+	/* general */
+	enum v4l2_mpeg_streamtype	st_type;
+	struct v4l2_bitrate		st_bitrate;
+
+	/* transport streams */
+	__u16				ts_pid_pmt;
+	__u16				ts_pid_audio;
+	__u16				ts_pid_video;
+	__u16				ts_pid_pcr;
+
+	/* program stream */
+	__u16				ps_size;
+	__u16				reserved_1;    /* align */
+
+	/* audio */
+	enum v4l2_mpeg_audiotype	au_type;
+	struct v4l2_bitrate		au_bitrate;
+	__u32				au_sample_rate;
+	__u8                            au_pesid;
+	__u8                            reserved_2[3]; /* align */
+
+	/* video */
+	enum v4l2_mpeg_videotype	vi_type;
+	enum v4l2_mpeg_aspectratio	vi_aspect_ratio;
+	struct v4l2_bitrate		vi_bitrate;
+	__u32				vi_frame_rate;
+	__u16				vi_frames_per_gop;
+	__u16				vi_bframes_count;
+	__u8                            vi_pesid;
+	__u8                            reserved_3[3]; /* align */
+
+	/* misc flags */
+	__u32                           closed_gops:1;
+	__u32                           pulldown:1;
+	__u32                           reserved_4:30; /* align */
+
+	/* I don't expect the above being perfect yet ;) */
+	__u32				reserved_5[8];
+};
+#endif
+
+struct v4l2_jpegcompression
+{
+	int quality;
+
+	int  APPn;              /* Number of APP segment to be written,
+				 * must be 0..15 */
+	int  APP_len;           /* Length of data in JPEG APPn segment */
+	char APP_data[60];      /* Data in the JPEG APPn segment. */
+
+	int  COM_len;           /* Length of data in JPEG COM segment */
+	char COM_data[60];      /* Data in JPEG COM segment */
+
+	__u32 jpeg_markers;     /* Which markers should go into the JPEG
+				 * output. Unless you exactly know what
+				 * you do, leave them untouched.
+				 * Inluding less markers will make the
+				 * resulting code smaller, but there will
+				 * be fewer aplications which can read it.
+				 * The presence of the APP and COM marker
+				 * is influenced by APP_len and COM_len
+				 * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
+                                        * allways use APP0 */
+};
+
+
+/*
+ *	M E M O R Y - M A P P I N G   B U F F E R S
+ */
+struct v4l2_requestbuffers
+{
+	__u32	                count;
+	enum v4l2_buf_type      type;
+	enum v4l2_memory        memory;
+	__u32	                reserved[2];
+};
+
+struct v4l2_buffer
+{
+	__u32			index;
+	enum v4l2_buf_type      type;
+	__u32			bytesused;
+	__u32			flags;
+	enum v4l2_field		field;
+	struct timeval		timestamp;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+
+	/* memory location */
+	enum v4l2_memory        memory;
+	union {
+		__u32           offset;
+		unsigned long   userptr;
+	} m;
+	__u32			length;
+	__u32			input;
+	__u32			reserved;
+};
+
+/*  Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
+#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
+#define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
+
+/*
+ *	O V E R L A Y   P R E V I E W
+ */
+struct v4l2_framebuffer
+{
+	__u32			capability;
+	__u32			flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+	void*                   base;
+	struct v4l2_pix_format	fmt;
+};
+/*  Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
+/*  Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY		0x0001
+#define V4L2_FBUF_FLAG_OVERLAY		0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
+
+struct v4l2_clip
+{
+	struct v4l2_rect        c;
+	struct v4l2_clip	*next;
+};
+
+struct v4l2_window
+{
+	struct v4l2_rect        w;
+	enum v4l2_field  	field;
+	__u32			chromakey;
+	struct v4l2_clip	__user *clips;
+	__u32			clipcount;
+	void			__user *bitmap;
+};
+
+
+/*
+ *	C A P T U R E   P A R A M E T E R S
+ */
+struct v4l2_captureparm
+{
+	__u32		   capability;	  /*  Supported modes */
+	__u32		   capturemode;	  /*  Current mode */
+	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
+	__u32		   extendedmode;  /*  Driver-specific extensions */
+	__u32              readbuffers;   /*  # of buffers for read */
+	__u32		   reserved[4];
+};
+/*  Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
+
+struct v4l2_outputparm
+{
+	__u32		   capability;	 /*  Supported modes */
+	__u32		   outputmode;	 /*  Current mode */
+	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
+	__u32		   extendedmode; /*  Driver-specific extensions */
+	__u32              writebuffers; /*  # of buffers for write */
+	__u32		   reserved[4];
+};
+
+/*
+ *	I N P U T   I M A G E   C R O P P I N G
+ */
+
+struct v4l2_cropcap {
+	enum v4l2_buf_type      type;
+        struct v4l2_rect        bounds;
+        struct v4l2_rect        defrect;
+        struct v4l2_fract       pixelaspect;
+};
+
+struct v4l2_crop {
+	enum v4l2_buf_type      type;
+	struct v4l2_rect        c;
+};
+
+/*
+ *      A N A L O G   V I D E O   S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
+#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
+
+#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+/* some common needed stuff */
+#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
+				 V4L2_STD_PAL_D1	|\
+				 V4L2_STD_PAL_K)
+#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
+				 V4L2_STD_PAL_DK	|\
+				 V4L2_STD_PAL_H		|\
+				 V4L2_STD_PAL_I)
+#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
+				 V4L2_STD_NTSC_M_JP)
+#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
+				 V4L2_STD_SECAM_K	|\
+				 V4L2_STD_SECAM_K1)
+#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
+				 V4L2_STD_SECAM_G	|\
+				 V4L2_STD_SECAM_H	|\
+				 V4L2_STD_SECAM_DK	|\
+				 V4L2_STD_SECAM_L)
+
+#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_60	|\
+				 V4L2_STD_NTSC)
+#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_SECAM)
+#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
+		                 V4L2_STD_ATSC_16_VSB)
+
+#define V4L2_STD_UNKNOWN        0
+#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
+				 V4L2_STD_625_50)
+
+struct v4l2_standard
+{
+	__u32	       	     index;
+	v4l2_std_id          id;
+	__u8		     name[24];
+	struct v4l2_fract    frameperiod; /* Frames, not fields */
+	__u32		     framelines;
+	__u32		     reserved[4];
+};
+
+
+/*
+ *	V I D E O   I N P U T S
+ */
+struct v4l2_input
+{
+	__u32	     index;		/*  Which input */
+	__u8	     name[32];	        /*  Label */
+	__u32	     type;		/*  Type of input */
+	__u32	     audioset;	        /*  Associated audios (bitfield) */
+	__u32        tuner;             /*  Associated tuner */
+	v4l2_std_id  std;
+	__u32	     status;
+	__u32	     reserved[4];
+};
+/*  Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER		1
+#define V4L2_INPUT_TYPE_CAMERA		2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL   0x00000002
+#define V4L2_IN_ST_NO_COLOR    0x00000004
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
+#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
+
+/*
+ *	V I D E O   O U T P U T S
+ */
+struct v4l2_output
+{
+	__u32	     index;		/*  Which output */
+	__u8	     name[32];	        /*  Label */
+	__u32	     type;		/*  Type of output */
+	__u32	     audioset;	        /*  Associated audios (bitfield) */
+	__u32	     modulator;         /*  Associated modulator */
+	v4l2_std_id  std;
+	__u32	     reserved[4];
+};
+/*  Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR		1
+#define V4L2_OUTPUT_TYPE_ANALOG			2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
+
+/*
+ *	C O N T R O L S
+ */
+struct v4l2_control
+{
+	__u32		     id;
+	__s32		     value;
+};
+
+/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl
+{
+	__u32	             id;
+	enum v4l2_ctrl_type  type;
+	__u8		     name[32];	/* Whatever */
+	__s32		     minimum;	/* Note signedness */
+	__s32		     maximum;
+	__s32	             step;
+	__s32		     default_value;
+	__u32                flags;
+	__u32		     reserved[2];
+};
+
+/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu
+{
+	__u32		id;
+	__u32		index;
+	__u8		name[32];	/* Whatever */
+	__u32		reserved;
+};
+
+/*  Control flags  */
+#define V4L2_CTRL_FLAG_DISABLED		0x0001
+#define V4L2_CTRL_FLAG_GRABBED		0x0002
+
+/*  Control IDs defined by V4L2 */
+#define V4L2_CID_BASE			0x00980900
+/*  IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE		0x08000000
+
+#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
+#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
+#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
+#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
+#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
+#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
+#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
+#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
+#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
+#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
+#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11)
+#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
+#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
+#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
+#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
+#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
+#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* ? Not sure */
+#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
+#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
+#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
+#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
+#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
+#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
+#define V4L2_CID_LASTP1			(V4L2_CID_BASE+24) /* last CID + 1 */
+
+/*
+ *	T U N I N G
+ */
+struct v4l2_tuner
+{
+	__u32                   index;
+	__u8			name[32];
+	enum v4l2_tuner_type    type;
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			rxsubchans;
+	__u32			audmode;
+	__s32			signal;
+	__s32			afc;
+	__u32			reserved[4];
+};
+
+struct v4l2_modulator
+{
+	__u32			index;
+	__u8			name[32];
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			txsubchans;
+	__u32			reserved[4];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW		0x0001
+#define V4L2_TUNER_CAP_NORM		0x0002
+#define V4L2_TUNER_CAP_STEREO		0x0010
+#define V4L2_TUNER_CAP_LANG2		0x0020
+#define V4L2_TUNER_CAP_SAP		0x0020
+#define V4L2_TUNER_CAP_LANG1		0x0040
+
+/*  Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO		0x0001
+#define V4L2_TUNER_SUB_STEREO		0x0002
+#define V4L2_TUNER_SUB_LANG2		0x0004
+#define V4L2_TUNER_SUB_SAP		0x0004
+#define V4L2_TUNER_SUB_LANG1		0x0008
+
+/*  Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO		0x0000
+#define V4L2_TUNER_MODE_STEREO		0x0001
+#define V4L2_TUNER_MODE_LANG2		0x0002
+#define V4L2_TUNER_MODE_SAP		0x0002
+#define V4L2_TUNER_MODE_LANG1		0x0003
+
+struct v4l2_frequency
+{
+	__u32	              tuner;
+	enum v4l2_tuner_type  type;
+        __u32	              frequency;
+	__u32	              reserved[8];
+};
+
+/*
+ *	A U D I O
+ */
+struct v4l2_audio
+{
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+/*  Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO		0x00001
+#define V4L2_AUDCAP_AVL			0x00002
+
+/*  Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL		0x00001
+
+struct v4l2_audioout
+{
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*
+ *	D A T A   S E R V I C E S   ( V B I )
+ *
+ *	Data services API by Michael Schimek
+ */
+
+struct v4l2_vbi_format
+{
+	__u32	sampling_rate;		/* in 1 Hz */
+	__u32	offset;
+	__u32	samples_per_line;
+	__u32	sample_format;		/* V4L2_PIX_FMT_* */
+	__s32	start[2];
+	__u32	count[2];
+	__u32	flags;			/* V4L2_VBI_* */
+	__u32	reserved[2];		/* must be zero */
+};
+
+/*  VBI flags  */
+#define V4L2_VBI_UNSYNC		(1<< 0)
+#define V4L2_VBI_INTERLACED	(1<< 1)
+
+
+/*
+ *	A G G R E G A T E   S T R U C T U R E S
+ */
+
+/*	Stream data format
+ */
+struct v4l2_format
+{
+	enum v4l2_buf_type type;
+	union
+	{
+		struct v4l2_pix_format	pix;  // V4L2_BUF_TYPE_VIDEO_CAPTURE
+		struct v4l2_window	win;  // V4L2_BUF_TYPE_VIDEO_OVERLAY
+		struct v4l2_vbi_format	vbi;  // V4L2_BUF_TYPE_VBI_CAPTURE
+		__u8	raw_data[200];        // user-defined
+	} fmt;
+};
+
+
+/*	Stream type-dependent parameters
+ */
+struct v4l2_streamparm
+{
+	enum v4l2_buf_type type;
+	union
+	{
+		struct v4l2_captureparm	capture;
+		struct v4l2_outputparm	output;
+		__u8	raw_data[200];  /* user-defined */
+	} parm;
+};
+
+
+
+/*
+ *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP		_IOR  ('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		_IO   ('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR ('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR ('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR ('V',  5, struct v4l2_format)
+#if 1 /* experimental */
+#define VIDIOC_G_MPEGCOMP       _IOR  ('V',  6, struct v4l2_mpeg_compression)
+#define VIDIOC_S_MPEGCOMP     	_IOW  ('V',  7, struct v4l2_mpeg_compression)
+#endif
+#define VIDIOC_REQBUFS		_IOWR ('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR ('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		_IOR  ('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		_IOW  ('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		_IOW  ('V', 14, int)
+#define VIDIOC_QBUF		_IOWR ('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR ('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		_IOW  ('V', 18, int)
+#define VIDIOC_STREAMOFF	_IOW  ('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR ('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR ('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		_IOR  ('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		_IOW  ('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR ('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR ('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR ('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR ('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR ('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		_IOW  ('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		_IOR  ('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		_IOW  ('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR ('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR ('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		_IOR  ('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR ('V', 39, int)
+#define VIDIOC_G_OUTPUT		_IOR  ('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR ('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR ('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		_IOR  ('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		_IOW  ('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR ('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	_IOW  ('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR ('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	_IOW  ('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR ('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR ('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		_IOW  ('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	_IOR  ('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	_IOW  ('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	_IOR  ('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR ('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR ('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR ('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY       _IOR  ('V', 67, enum v4l2_priority)
+#define VIDIOC_S_PRIORITY       _IOW  ('V', 68, enum v4l2_priority)
+
+/* for compatibility, will go away some day */
+#define VIDIOC_OVERLAY_OLD     	_IOWR ('V', 14, int)
+#define VIDIOC_S_PARM_OLD      	_IOW  ('V', 22, struct v4l2_streamparm)
+#define VIDIOC_S_CTRL_OLD      	_IOW  ('V', 28, struct v4l2_control)
+#define VIDIOC_G_AUDIO_OLD     	_IOWR ('V', 33, struct v4l2_audio)
+#define VIDIOC_G_AUDOUT_OLD    	_IOWR ('V', 49, struct v4l2_audioout)
+#define VIDIOC_CROPCAP_OLD     	_IOR  ('V', 58, struct v4l2_cropcap)
+
+#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+
+
+#ifdef __KERNEL__
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#include <linux/fs.h>
+
+/*  Video standard functions  */
+extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+				    int id, char *name);
+
+/* prority handling */
+struct v4l2_prio_state {
+	atomic_t prios[4];
+};
+int v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+		     enum v4l2_priority new);
+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
+
+/* names for fancy debug output */
+extern char *v4l2_field_names[];
+extern char *v4l2_type_names[];
+extern char *v4l2_ioctl_names[];
+
+/*  Compatibility layer interface  --  v4l1-compat module */
+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
+			   unsigned int cmd, void *arg);
+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
+			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_VIDEODEV2_H */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/videotext.h b/include/linux/videotext.h
new file mode 100644
index 000000000000..018f92047ff8
--- /dev/null
+++ b/include/linux/videotext.h
@@ -0,0 +1,125 @@
+#ifndef _VTX_H
+#define _VTX_H
+
+/*
+ * Teletext (=Videotext) hardware decoders using interface /dev/vtx
+ * Do not confuse with drivers using /dev/vbi which decode videotext by software
+ *
+ * Videotext IOCTLs changed in order to use _IO() macros defined in <linux/ioctl.h>,
+ * unused tuner IOCTLs cleaned up by
+ * Michael Geng <linux@MichaelGeng.de>
+ *
+ * Copyright (c) 1994-97 Martin Buck  <martin-2.buck@student.uni-ulm.de>
+ * Read COPYING for more information
+ *
+ */
+
+
+/*
+ *	Videotext ioctls
+ */
+#define VTXIOCGETINFO	_IOR  (0x81,  1, vtx_info_t)
+#define VTXIOCCLRPAGE	_IOW  (0x81,  2, vtx_pagereq_t)
+#define VTXIOCCLRFOUND	_IOW  (0x81,  3, vtx_pagereq_t)
+#define VTXIOCPAGEREQ	_IOW  (0x81,  4, vtx_pagereq_t)
+#define VTXIOCGETSTAT	_IOW  (0x81,  5, vtx_pagereq_t)
+#define VTXIOCGETPAGE	_IOW  (0x81,  6, vtx_pagereq_t)
+#define VTXIOCSTOPDAU	_IOW  (0x81,  7, vtx_pagereq_t)
+#define VTXIOCPUTPAGE	_IO   (0x81,  8)
+#define VTXIOCSETDISP	_IO   (0x81,  9)
+#define VTXIOCPUTSTAT	_IO   (0x81, 10)
+#define VTXIOCCLRCACHE	_IO   (0x81, 11)
+#define VTXIOCSETVIRT	_IOW  (0x81, 12, long)
+
+/* for compatibility, will go away some day */
+#define VTXIOCGETINFO_OLD  0x7101  /* get version of driver & capabilities of vtx-chipset */
+#define VTXIOCCLRPAGE_OLD  0x7102  /* clear page-buffer */
+#define VTXIOCCLRFOUND_OLD 0x7103  /* clear bits indicating that page was found */
+#define VTXIOCPAGEREQ_OLD  0x7104  /* search for page */
+#define VTXIOCGETSTAT_OLD  0x7105  /* get status of page-buffer */
+#define VTXIOCGETPAGE_OLD  0x7106  /* get contents of page-buffer */
+#define VTXIOCSTOPDAU_OLD  0x7107  /* stop data acquisition unit */
+#define VTXIOCPUTPAGE_OLD  0x7108  /* display page on TV-screen */
+#define VTXIOCSETDISP_OLD  0x7109  /* set TV-mode */
+#define VTXIOCPUTSTAT_OLD  0x710a  /* set status of TV-output-buffer */
+#define VTXIOCCLRCACHE_OLD 0x710b  /* clear cache on VTX-interface (if avail.) */
+#define VTXIOCSETVIRT_OLD  0x710c  /* turn on virtual mode (this disables TV-display) */
+
+/* 
+ *	Definitions for VTXIOCGETINFO
+ */
+ 
+#define SAA5243 0
+#define SAA5246 1
+#define SAA5249 2
+#define SAA5248 3
+#define XSTV5346 4
+
+typedef struct {
+	int version_major, version_minor;	/* version of driver; if version_major changes, driver */
+						/* is not backward compatible!!! CHECK THIS!!! */  
+	int numpages;				/* number of page-buffers of vtx-chipset */
+	int cct_type;				/* type of vtx-chipset (SAA5243, SAA5246, SAA5248 or
+  						 * SAA5249) */
+}
+vtx_info_t;
+
+
+/*
+ *	Definitions for VTXIOC{CLRPAGE,CLRFOUND,PAGEREQ,GETSTAT,GETPAGE,STOPDAU,PUTPAGE,SETDISP}
+ */
+
+#define MIN_UNIT   (1<<0)
+#define MIN_TEN    (1<<1)
+#define HR_UNIT    (1<<2)
+#define HR_TEN     (1<<3)
+#define PG_UNIT    (1<<4)
+#define PG_TEN     (1<<5)
+#define PG_HUND    (1<<6)
+#define PGMASK_MAX (1<<7)
+#define PGMASK_PAGE (PG_HUND | PG_TEN | PG_UNIT)
+#define PGMASK_HOUR (HR_TEN | HR_UNIT)
+#define PGMASK_MINUTE (MIN_TEN | MIN_UNIT)
+
+typedef struct 
+{
+	int page;	/* number of requested page (hexadecimal) */
+	int hour;	/* requested hour (hexadecimal) */
+	int minute;	/* requested minute (hexadecimal) */
+	int pagemask;	/* mask defining which values of the above are set */
+	int pgbuf;	/* buffer where page will be stored */
+	int start;	/* start of requested part of page */
+	int end;	/* end of requested part of page */
+	void __user *buffer;	/* pointer to beginning of destination buffer */
+}
+vtx_pagereq_t;
+
+
+/*
+ *	Definitions for VTXIOC{GETSTAT,PUTSTAT}
+ */
+ 
+#define VTX_PAGESIZE (40 * 24)
+#define VTX_VIRTUALSIZE (40 * 49)
+
+typedef struct 
+{
+	int pagenum;			/* number of page (hexadecimal) */
+	int hour;			/* hour (hexadecimal) */
+	int minute;			/* minute (hexadecimal) */
+	int charset;			/* national charset */
+	unsigned delete : 1;		/* delete page (C4) */
+	unsigned headline : 1;		/* insert headline (C5) */
+	unsigned subtitle : 1;		/* insert subtitle (C6) */
+	unsigned supp_header : 1;	/* suppress header (C7) */
+	unsigned update : 1;		/* update page (C8) */
+	unsigned inter_seq : 1;		/* interrupted sequence (C9) */
+	unsigned dis_disp : 1;		/* disable/suppress display (C10) */
+	unsigned serial : 1;		/* serial mode (C11) */
+	unsigned notfound : 1;		/* /FOUND */
+	unsigned pblf : 1;		/* PBLF */
+	unsigned hamming : 1;		/* hamming-error occurred */
+}
+vtx_pageinfo_t;
+ 
+#endif /* _VTX_H */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
new file mode 100644
index 000000000000..3a358c895188
--- /dev/null
+++ b/include/linux/vmalloc.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_VMALLOC_H
+#define _LINUX_VMALLOC_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>		/* pgprot_t */
+
+/* bits in vm_struct->flags */
+#define VM_IOREMAP	0x00000001	/* ioremap() and friends */
+#define VM_ALLOC	0x00000002	/* vmalloc() */
+#define VM_MAP		0x00000004	/* vmap()ed pages */
+/* bits [20..32] reserved for arch specific ioremap internals */
+
+struct vm_struct {
+	void			*addr;
+	unsigned long		size;
+	unsigned long		flags;
+	struct page		**pages;
+	unsigned int		nr_pages;
+	unsigned long		phys_addr;
+	struct vm_struct	*next;
+};
+
+/*
+ *	Highlevel APIs for driver use
+ */
+extern void *vmalloc(unsigned long size);
+extern void *vmalloc_exec(unsigned long size);
+extern void *vmalloc_32(unsigned long size);
+extern void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask, pgprot_t prot);
+extern void *__vmalloc_area(struct vm_struct *area, unsigned int __nocast gfp_mask, pgprot_t prot);
+extern void vfree(void *addr);
+
+extern void *vmap(struct page **pages, unsigned int count,
+			unsigned long flags, pgprot_t prot);
+extern void vunmap(void *addr);
+ 
+/*
+ *	Lowlevel-APIs (not for driver use!)
+ */
+extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
+extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
+					unsigned long start, unsigned long end);
+extern struct vm_struct *remove_vm_area(void *addr);
+extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
+			struct page ***pages);
+extern void unmap_vm_area(struct vm_struct *area);
+
+/*
+ *	Internals.  Dont't use..
+ */
+extern rwlock_t vmlist_lock;
+extern struct vm_struct *vmlist;
+
+#endif /* _LINUX_VMALLOC_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
new file mode 100644
index 000000000000..9f95b0bea5b3
--- /dev/null
+++ b/include/linux/vt.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_VT_H
+#define _LINUX_VT_H
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY	0x5600	/* find available vt */
+
+struct vt_mode {
+	char mode;		/* vt mode */
+	char waitv;		/* if set, hang on writes if not active */
+	short relsig;		/* signal to raise on release req */
+	short acqsig;		/* signal to raise on acquisition */
+	short frsig;		/* unused (set to 0) */
+};
+#define VT_GETMODE	0x5601	/* get mode of active vt */
+#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define		VT_AUTO		0x00	/* auto vt switching */
+#define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
+
+struct vt_stat {
+	unsigned short v_active;	/* active vt */
+	unsigned short v_signal;	/* signal to send */
+	unsigned short v_state;		/* vt bitmask */
+};
+#define VT_GETSTATE	0x5603	/* get global vt state info */
+#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+
+#define VT_RELDISP	0x5605	/* release display */
+
+#define VT_ACTIVATE	0x5606	/* make vt active */
+#define VT_WAITACTIVE	0x5607	/* wait for vt active */
+#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+
+struct vt_sizes {
+	unsigned short v_rows;		/* number of rows */
+	unsigned short v_cols;		/* number of columns */
+	unsigned short v_scrollsize;	/* number of lines of scrollback */
+};
+#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+
+struct vt_consize {
+	unsigned short v_rows;	/* number of rows */
+	unsigned short v_cols;	/* number of columns */
+	unsigned short v_vlin;	/* number of pixel rows on screen */
+	unsigned short v_clin;	/* number of pixel rows per character */
+	unsigned short v_vcol;	/* number of pixel columns on screen */
+	unsigned short v_ccol;	/* number of pixel columns per character */
+};
+#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
+
+#endif /* _LINUX_VT_H */
diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h
new file mode 100644
index 000000000000..1f7ba3629053
--- /dev/null
+++ b/include/linux/vt_buffer.h
@@ -0,0 +1,64 @@
+/*
+ *	include/linux/vt_buffer.h -- Access to VT screen buffer
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *
+ *	This is a set of macros and functions which are used in the
+ *	console driver and related code to access the screen buffer.
+ *	In most cases the console works with simple in-memory buffer,
+ *	but when handling hardware text mode consoles, we store
+ *	the foreground console directly in video memory.
+ */
+
+#ifndef _LINUX_VT_BUFFER_H_
+#define _LINUX_VT_BUFFER_H_
+
+#include <linux/config.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+#include <asm/vga.h>
+#endif
+
+#ifndef VT_BUF_HAVE_RW
+#define scr_writew(val, addr) (*(addr) = (val))
+#define scr_readw(addr) (*(addr))
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+#endif
+
+#ifndef VT_BUF_HAVE_MEMSETW
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+{
+	count /= 2;
+	while (count--)
+		scr_writew(c, s++);
+}
+#endif
+
+#ifndef VT_BUF_HAVE_MEMCPYW
+static inline void scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
+{
+	count /= 2;
+	while (count--)
+		scr_writew(scr_readw(s++), d++);
+}
+#endif
+
+#ifndef VT_BUF_HAVE_MEMMOVEW
+static inline void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+#endif
+
+#endif
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
new file mode 100644
index 000000000000..fab5aed8ca31
--- /dev/null
+++ b/include/linux/vt_kern.h
@@ -0,0 +1,86 @@
+#ifndef _VT_KERN_H
+#define _VT_KERN_H
+
+/*
+ * this really is an extension of the vc_cons structure in console.c, but
+ * with information needed by the vt package
+ */
+
+#include <linux/config.h>
+#include <linux/vt.h>
+#include <linux/kd.h>
+#include <linux/tty.h>
+#include <linux/console_struct.h>
+#include <linux/mm.h>
+
+/*
+ * Presently, a lot of graphics programs do not restore the contents of
+ * the higher font pages.  Defining this flag will avoid use of them, but
+ * will lose support for PIO_FONTRESET.  Note that many font operations are
+ * not likely to work with these programs anyway; they need to be
+ * fixed.  The linux/Documentation directory includes a code snippet
+ * to save and restore the text font.
+ */
+#ifdef CONFIG_VGA_CONSOLE
+#define BROKEN_GRAPHICS_PROGRAMS 1
+#endif
+
+extern void kd_mksound(unsigned int hz, unsigned int ticks);
+extern int kbd_rate(struct kbd_repeat *rep);
+
+/* console.c */
+
+int vc_allocate(unsigned int console);
+int vc_cons_allocated(unsigned int console);
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
+void vc_disallocate(unsigned int console);
+void reset_palette(struct vc_data *vc);
+void do_blank_screen(int entering_gfx);
+void do_unblank_screen(int leaving_gfx);
+void unblank_screen(void);
+void poke_blanked_console(void);
+int con_font_op(struct vc_data *vc, struct console_font_op *op);
+int con_set_cmap(unsigned char __user *cmap);
+int con_get_cmap(unsigned char __user *cmap);
+void scrollback(struct vc_data *vc, int lines);
+void scrollfront(struct vc_data *vc, int lines);
+void update_region(struct vc_data *vc, unsigned long start, int count);
+void redraw_screen(struct vc_data *vc, int is_switch);
+#define update_screen(x) redraw_screen(x, 0)
+#define switch_screen(x) redraw_screen(x, 1)
+
+struct tty_struct;
+int tioclinux(struct tty_struct *tty, unsigned long arg);
+
+/* consolemap.c */
+
+struct unimapinit;
+struct unipair;
+
+int con_set_trans_old(unsigned char __user * table);
+int con_get_trans_old(unsigned char __user * table);
+int con_set_trans_new(unsigned short __user * table);
+int con_get_trans_new(unsigned short __user * table);
+int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui);
+int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list);
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list);
+int con_set_default_unimap(struct vc_data *vc);
+void con_free_unimap(struct vc_data *vc);
+void con_protect_unimap(struct vc_data *vc, int rdonly);
+int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
+
+/* vt.c */
+int vt_waitactive(int vt);
+void change_console(struct vc_data *new_vc);
+void reset_vc(struct vc_data *vc);
+
+/*
+ * vc_screen.c shares this temporary buffer with the console write code so that
+ * we can easily avoid touching user space while holding the console spinlock.
+ */
+
+#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
+extern char con_buf[CON_BUF_SIZE];
+extern struct semaphore con_buf_sem;
+
+#endif /* _VT_KERN_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
new file mode 100644
index 000000000000..17c874a8eb3f
--- /dev/null
+++ b/include/linux/wait.h
@@ -0,0 +1,460 @@
+#ifndef _LINUX_WAIT_H
+#define _LINUX_WAIT_H
+
+#define WNOHANG		0x00000001
+#define WUNTRACED	0x00000002
+#define WSTOPPED	WUNTRACED
+#define WEXITED		0x00000004
+#define WCONTINUED	0x00000008
+#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
+
+#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL		0
+#define P_PID		1
+#define P_PGID		2
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/stddef.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/current.h>
+
+typedef struct __wait_queue wait_queue_t;
+typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int sync, void *key);
+int default_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+
+struct __wait_queue {
+	unsigned int flags;
+#define WQ_FLAG_EXCLUSIVE	0x01
+	struct task_struct * task;
+	wait_queue_func_t func;
+	struct list_head task_list;
+};
+
+struct wait_bit_key {
+	void *flags;
+	int bit_nr;
+};
+
+struct wait_bit_queue {
+	struct wait_bit_key key;
+	wait_queue_t wait;
+};
+
+struct __wait_queue_head {
+	spinlock_t lock;
+	struct list_head task_list;
+};
+typedef struct __wait_queue_head wait_queue_head_t;
+
+
+/*
+ * Macros for declaration and initialisaton of the datatypes
+ */
+
+#define __WAITQUEUE_INITIALIZER(name, tsk) {				\
+	.task		= tsk,						\
+	.func		= default_wake_function,			\
+	.task_list	= { NULL, NULL } }
+
+#define DECLARE_WAITQUEUE(name, tsk)					\
+	wait_queue_t name = __WAITQUEUE_INITIALIZER(name, tsk)
+
+#define __WAIT_QUEUE_HEAD_INITIALIZER(name) {				\
+	.lock		= SPIN_LOCK_UNLOCKED,				\
+	.task_list	= { &(name).task_list, &(name).task_list } }
+
+#define DECLARE_WAIT_QUEUE_HEAD(name) \
+	wait_queue_head_t name = __WAIT_QUEUE_HEAD_INITIALIZER(name)
+
+#define __WAIT_BIT_KEY_INITIALIZER(word, bit)				\
+	{ .flags = word, .bit_nr = bit, }
+
+static inline void init_waitqueue_head(wait_queue_head_t *q)
+{
+	spin_lock_init(&q->lock);
+	INIT_LIST_HEAD(&q->task_list);
+}
+
+static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
+{
+	q->flags = 0;
+	q->task = p;
+	q->func = default_wake_function;
+}
+
+static inline void init_waitqueue_func_entry(wait_queue_t *q,
+					wait_queue_func_t func)
+{
+	q->flags = 0;
+	q->task = NULL;
+	q->func = func;
+}
+
+static inline int waitqueue_active(wait_queue_head_t *q)
+{
+	return !list_empty(&q->task_list);
+}
+
+/*
+ * Used to distinguish between sync and async io wait context:
+ * sync i/o typically specifies a NULL wait queue entry or a wait
+ * queue entry bound to a task (current task) to wake up.
+ * aio specifies a wait queue entry with an async notification
+ * callback routine, not associated with any task.
+ */
+#define is_sync_wait(wait)	(!(wait) || ((wait)->task))
+
+extern void FASTCALL(add_wait_queue(wait_queue_head_t *q, wait_queue_t * wait));
+extern void FASTCALL(add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t * wait));
+extern void FASTCALL(remove_wait_queue(wait_queue_head_t *q, wait_queue_t * wait));
+
+static inline void __add_wait_queue(wait_queue_head_t *head, wait_queue_t *new)
+{
+	list_add(&new->task_list, &head->task_list);
+}
+
+/*
+ * Used for wake-one threads:
+ */
+static inline void __add_wait_queue_tail(wait_queue_head_t *head,
+						wait_queue_t *new)
+{
+	list_add_tail(&new->task_list, &head->task_list);
+}
+
+static inline void __remove_wait_queue(wait_queue_head_t *head,
+							wait_queue_t *old)
+{
+	list_del(&old->task_list);
+}
+
+void FASTCALL(__wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key));
+extern void FASTCALL(__wake_up_locked(wait_queue_head_t *q, unsigned int mode));
+extern void FASTCALL(__wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr));
+void FASTCALL(__wake_up_bit(wait_queue_head_t *, void *, int));
+int FASTCALL(__wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned));
+int FASTCALL(__wait_on_bit_lock(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned));
+void FASTCALL(wake_up_bit(void *, int));
+int FASTCALL(out_of_line_wait_on_bit(void *, int, int (*)(void *), unsigned));
+int FASTCALL(out_of_line_wait_on_bit_lock(void *, int, int (*)(void *), unsigned));
+wait_queue_head_t *FASTCALL(bit_waitqueue(void *, int));
+
+#define wake_up(x)			__wake_up(x, TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE, 1, NULL)
+#define wake_up_nr(x, nr)		__wake_up(x, TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE, nr, NULL)
+#define wake_up_all(x)			__wake_up(x, TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE, 0, NULL)
+#define wake_up_interruptible(x)	__wake_up(x, TASK_INTERRUPTIBLE, 1, NULL)
+#define wake_up_interruptible_nr(x, nr)	__wake_up(x, TASK_INTERRUPTIBLE, nr, NULL)
+#define wake_up_interruptible_all(x)	__wake_up(x, TASK_INTERRUPTIBLE, 0, NULL)
+#define	wake_up_locked(x)		__wake_up_locked((x), TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE)
+#define wake_up_interruptible_sync(x)   __wake_up_sync((x),TASK_INTERRUPTIBLE, 1)
+
+#define __wait_event(wq, condition) 					\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		schedule();						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ */
+#define wait_event(wq, condition) 					\
+do {									\
+	if (condition)	 						\
+		break;							\
+	__wait_event(wq, condition);					\
+} while (0)
+
+#define __wait_event_timeout(wq, condition, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		ret = schedule_timeout(ret);				\
+		if (!ret)						\
+			break;						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_timeout - sleep until a condition gets true or a timeout elapses
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function returns 0 if the @timeout elapsed, and the remaining
+ * jiffies if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_timeout(wq, condition, timeout)			\
+({									\
+	long __ret = timeout;						\
+	if (!(condition)) 						\
+		__wait_event_timeout(wq, condition, __ret);		\
+	__ret;								\
+})
+
+#define __wait_event_interruptible(wq, condition, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			schedule();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible(wq, condition)				\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__wait_event_interruptible(wq, condition, __ret);	\
+	__ret;								\
+})
+
+#define __wait_event_interruptible_timeout(wq, condition, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			ret = schedule_timeout(ret);			\
+			if (!ret)					\
+				break;					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
+ * was interrupted by a signal, and the remaining jiffies otherwise
+ * if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_interruptible_timeout(wq, condition, timeout)	\
+({									\
+	long __ret = timeout;						\
+	if (!(condition))						\
+		__wait_event_interruptible_timeout(wq, condition, __ret); \
+	__ret;								\
+})
+
+#define __wait_event_interruptible_exclusive(wq, condition, ret)	\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait_exclusive(&wq, &__wait,			\
+					TASK_INTERRUPTIBLE);		\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			schedule();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+#define wait_event_interruptible_exclusive(wq, condition)		\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__wait_event_interruptible_exclusive(wq, condition, __ret);\
+	__ret;								\
+})
+
+/*
+ * Must be called with the spinlock in the wait_queue_head_t held.
+ */
+static inline void add_wait_queue_exclusive_locked(wait_queue_head_t *q,
+						   wait_queue_t * wait)
+{
+	wait->flags |= WQ_FLAG_EXCLUSIVE;
+	__add_wait_queue_tail(q,  wait);
+}
+
+/*
+ * Must be called with the spinlock in the wait_queue_head_t held.
+ */
+static inline void remove_wait_queue_locked(wait_queue_head_t *q,
+					    wait_queue_t * wait)
+{
+	__remove_wait_queue(q,  wait);
+}
+
+/*
+ * These are the old interfaces to sleep waiting for an event.
+ * They are racy.  DO NOT use them, use the wait_event* interfaces above.  
+ * We plan to remove these interfaces during 2.7.
+ */
+extern void FASTCALL(sleep_on(wait_queue_head_t *q));
+extern long FASTCALL(sleep_on_timeout(wait_queue_head_t *q,
+				      signed long timeout));
+extern void FASTCALL(interruptible_sleep_on(wait_queue_head_t *q));
+extern long FASTCALL(interruptible_sleep_on_timeout(wait_queue_head_t *q,
+						    signed long timeout));
+
+/*
+ * Waitqueues which are removed from the waitqueue_head at wakeup time
+ */
+void FASTCALL(prepare_to_wait(wait_queue_head_t *q,
+				wait_queue_t *wait, int state));
+void FASTCALL(prepare_to_wait_exclusive(wait_queue_head_t *q,
+				wait_queue_t *wait, int state));
+void FASTCALL(finish_wait(wait_queue_head_t *q, wait_queue_t *wait));
+int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+
+#define DEFINE_WAIT(name)						\
+	wait_queue_t name = {						\
+		.task		= current,				\
+		.func		= autoremove_wake_function,		\
+		.task_list	= {	.next = &(name).task_list,	\
+					.prev = &(name).task_list,	\
+				},					\
+	}
+
+#define DEFINE_WAIT_BIT(name, word, bit)				\
+	struct wait_bit_queue name = {					\
+		.key = __WAIT_BIT_KEY_INITIALIZER(word, bit),		\
+		.wait	= {						\
+			.task		= current,			\
+			.func		= wake_bit_function,		\
+			.task_list	=				\
+				LIST_HEAD_INIT((name).wait.task_list),	\
+		},							\
+	}
+
+#define init_wait(wait)							\
+	do {								\
+		(wait)->task = current;					\
+		(wait)->func = autoremove_wake_function;		\
+		INIT_LIST_HEAD(&(wait)->task_list);			\
+	} while (0)
+
+/**
+ * wait_on_bit - wait for a bit to be cleared
+ * @word: the word being waited on, a kernel virtual address
+ * @bit: the bit of the word being waited on
+ * @action: the function used to sleep, which may take special actions
+ * @mode: the task state to sleep in
+ *
+ * There is a standard hashed waitqueue table for generic use. This
+ * is the part of the hashtable's accessor API that waits on a bit.
+ * For instance, if one were to have waiters on a bitflag, one would
+ * call wait_on_bit() in threads waiting for the bit to clear.
+ * One uses wait_on_bit() where one is waiting for the bit to clear,
+ * but has no intention of setting it.
+ */
+static inline int wait_on_bit(void *word, int bit,
+				int (*action)(void *), unsigned mode)
+{
+	if (!test_bit(bit, word))
+		return 0;
+	return out_of_line_wait_on_bit(word, bit, action, mode);
+}
+
+/**
+ * wait_on_bit_lock - wait for a bit to be cleared, when wanting to set it
+ * @word: the word being waited on, a kernel virtual address
+ * @bit: the bit of the word being waited on
+ * @action: the function used to sleep, which may take special actions
+ * @mode: the task state to sleep in
+ *
+ * There is a standard hashed waitqueue table for generic use. This
+ * is the part of the hashtable's accessor API that waits on a bit
+ * when one intends to set it, for instance, trying to lock bitflags.
+ * For instance, if one were to have waiters trying to set bitflag
+ * and waiting for it to clear before setting it, one would call
+ * wait_on_bit() in threads waiting to be able to set the bit.
+ * One uses wait_on_bit_lock() where one is waiting for the bit to
+ * clear with the intention of setting it, and when done, clearing it.
+ */
+static inline int wait_on_bit_lock(void *word, int bit,
+				int (*action)(void *), unsigned mode)
+{
+	if (!test_and_set_bit(bit, word))
+		return 0;
+	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
+}
+	
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/wanpipe.h b/include/linux/wanpipe.h
new file mode 100644
index 000000000000..167d956c492b
--- /dev/null
+++ b/include/linux/wanpipe.h
@@ -0,0 +1,492 @@
+/*****************************************************************************
+* wanpipe.h	WANPIPE(tm) Multiprotocol WAN Link Driver.
+*		User-level API definitions.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack  	
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Nov 3,  2000  Nenad Corbic    Added config_id to sdla_t structure.
+*                               Used to determine the protocol running.
+* Jul 13, 2000  Nenad Corbic	Added SyncPPP Support
+* Feb 24, 2000  Nenad Corbic    Added support for x25api driver
+* Oct 04, 1999  Nenad Corbic    New CHDLC and FRAME RELAY code, SMP support
+* Jun 02, 1999  Gideon Hack	Added 'update_call_count' for Cisco HDLC 
+*				support
+* Jun 26, 1998	David Fong	Added 'ip_mode' in sdla_t.u.p for dynamic IP
+*				routing mode configuration
+* Jun 12, 1998	David Fong	Added Cisco HDLC union member in sdla_t
+* Dec 08, 1997	Jaspreet Singh  Added 'authenticator' in union of 'sdla_t' 
+* Nov 26, 1997	Jaspreet Singh	Added 'load_sharing' structure.  Also added 
+*				'devs_struct','dev_to_devtint_next' to 'sdla_t'	
+* Nov 24, 1997	Jaspreet Singh	Added 'irq_dis_if_send_count', 
+*				'irq_dis_poll_count' to 'sdla_t'.
+* Nov 06, 1997	Jaspreet Singh	Added a define called 'INTR_TEST_MODE'
+* Oct 20, 1997	Jaspreet Singh	Added 'buff_intr_mode_unbusy' and 
+*				'dlci_intr_mode_unbusy' to 'sdla_t'
+* Oct 18, 1997	Jaspreet Singh	Added structure to maintain global driver
+*				statistics.
+* Jan 15, 1997	Gene Kozin	Version 3.1.0
+*				 o added UDP management stuff
+* Jan 02, 1997	Gene Kozin	Version 3.0.0
+*****************************************************************************/
+#ifndef	_WANPIPE_H
+#define	_WANPIPE_H
+
+#include <linux/wanrouter.h>
+
+/* Defines */
+
+#ifndef	PACKED
+#define	PACKED	__attribute__((packed))
+#endif
+
+#define	WANPIPE_MAGIC	0x414C4453L	/* signature: 'SDLA' reversed */
+
+/* IOCTL numbers (up to 16) */
+#define	WANPIPE_DUMP	(ROUTER_USER+0)	/* dump adapter's memory */
+#define	WANPIPE_EXEC	(ROUTER_USER+1)	/* execute firmware command */
+
+#define TRACE_ALL                       0x00
+#define TRACE_PROT			0x01
+#define TRACE_DATA			0x02
+
+/* values for request/reply byte */
+#define UDPMGMT_REQUEST	0x01
+#define UDPMGMT_REPLY	0x02
+#define UDP_OFFSET	12
+
+#define MAX_CMD_BUFF 	10
+#define MAX_X25_LCN 	255	/* Maximum number of x25 channels */
+#define MAX_LCN_NUM	4095	/* Maximum lcn number */
+#define MAX_FT1_RETRY 	100
+
+#ifndef AF_WANPIPE
+	#define AF_WANPIPE 25
+	#ifndef PF_WANPIPE
+		#define PF_WANPIPE AF_WANPIPE
+	#endif
+#endif
+
+
+#define TX_TIMEOUT 5*HZ
+
+/* General Critical Flags */
+#define SEND_CRIT	0x00
+#define PERI_CRIT	0x01
+
+/* Chdlc and PPP polling critical flag */
+#define POLL_CRIT	0x03
+
+/* Frame Relay Tx IRQ send critical flag */
+#define SEND_TXIRQ_CRIT 0x02
+
+/* Frame Relay ARP critical flag */
+#define ARP_CRIT	0x03
+
+/* Bit maps for dynamic interface configuration
+ * DYN_OPT_ON : turns this option on/off 
+ * DEV_DOWN   : device was shutdown by the driver not
+ *              by user 
+ */
+#define DYN_OPT_ON	0x00
+#define DEV_DOWN	0x01
+
+/*
+ * Data structures for IOCTL calls.
+ */
+
+typedef struct sdla_dump	/* WANPIPE_DUMP */
+{
+	unsigned long magic;	/* for verification */
+	unsigned long offset;	/* absolute adapter memory address */
+	unsigned long length;	/* block length */
+	void* ptr;		/* -> buffer */
+} sdla_dump_t;
+
+typedef struct sdla_exec	/* WANPIPE_EXEC */
+{
+	unsigned long magic;	/* for verification */
+	void* cmd;		/* -> command structure */
+	void* data;		/* -> data buffer */
+} sdla_exec_t;
+
+/* UDP management stuff */
+
+typedef struct wum_header
+{
+	unsigned char signature[8];	/* 00h: signature */
+	unsigned char type;		/* 08h: request/reply */
+	unsigned char command;		/* 09h: commnand */
+	unsigned char reserved[6];	/* 0Ah: reserved */
+} wum_header_t;
+
+/*************************************************************************
+ Data Structure for global statistics
+*************************************************************************/
+
+typedef struct global_stats
+{
+	unsigned long isr_entry;
+	unsigned long isr_already_critical;		
+	unsigned long isr_rx;
+	unsigned long isr_tx;
+	unsigned long isr_intr_test;
+	unsigned long isr_spurious;
+	unsigned long isr_enable_tx_int;
+	unsigned long rx_intr_corrupt_rx_bfr;
+	unsigned long rx_intr_on_orphaned_DLCI;
+	unsigned long rx_intr_dev_not_started;
+	unsigned long tx_intr_dev_not_started;
+	unsigned long poll_entry;
+	unsigned long poll_already_critical;
+	unsigned long poll_processed;
+	unsigned long poll_tbusy_bad_status;
+	unsigned long poll_host_disable_irq;
+	unsigned long poll_host_enable_irq;
+
+} global_stats_t;
+
+
+typedef struct{
+	unsigned short	udp_src_port		PACKED;
+	unsigned short	udp_dst_port		PACKED;
+	unsigned short	udp_length		PACKED;
+	unsigned short	udp_checksum		PACKED;
+} udp_pkt_t;
+
+
+typedef struct {
+	unsigned char	ver_inet_hdr_length	PACKED;
+	unsigned char	service_type		PACKED;
+	unsigned short	total_length		PACKED;
+	unsigned short	identifier		PACKED;
+	unsigned short	flags_frag_offset	PACKED;
+	unsigned char	ttl			PACKED;
+	unsigned char	protocol		PACKED;
+	unsigned short	hdr_checksum		PACKED;
+	unsigned long	ip_src_address		PACKED;
+	unsigned long	ip_dst_address		PACKED;
+} ip_pkt_t;
+
+
+typedef struct {
+        unsigned char           signature[8]    PACKED;
+        unsigned char           request_reply   PACKED;
+        unsigned char           id              PACKED;
+        unsigned char           reserved[6]     PACKED;
+} wp_mgmt_t;
+
+/*************************************************************************
+ Data Structure for if_send  statistics
+*************************************************************************/  
+typedef struct if_send_stat{
+	unsigned long if_send_entry;
+	unsigned long if_send_skb_null;
+	unsigned long if_send_broadcast;
+	unsigned long if_send_multicast;
+	unsigned long if_send_critical_ISR;
+	unsigned long if_send_critical_non_ISR;
+	unsigned long if_send_tbusy;
+	unsigned long if_send_tbusy_timeout;
+	unsigned long if_send_PIPE_request;
+	unsigned long if_send_wan_disconnected;
+	unsigned long if_send_dlci_disconnected;
+	unsigned long if_send_no_bfrs;
+	unsigned long if_send_adptr_bfrs_full;
+	unsigned long if_send_bfr_passed_to_adptr;
+	unsigned long if_send_protocol_error;
+       	unsigned long if_send_bfr_not_passed_to_adptr;
+       	unsigned long if_send_tx_int_enabled;
+        unsigned long if_send_consec_send_fail; 
+} if_send_stat_t;
+
+typedef struct rx_intr_stat{
+	unsigned long rx_intr_no_socket;
+	unsigned long rx_intr_dev_not_started;
+	unsigned long rx_intr_PIPE_request;
+	unsigned long rx_intr_bfr_not_passed_to_stack;
+	unsigned long rx_intr_bfr_passed_to_stack;
+} rx_intr_stat_t;	
+
+typedef struct pipe_mgmt_stat{
+	unsigned long UDP_PIPE_mgmt_kmalloc_err;
+	unsigned long UDP_PIPE_mgmt_direction_err;
+	unsigned long UDP_PIPE_mgmt_adptr_type_err;
+	unsigned long UDP_PIPE_mgmt_adptr_cmnd_OK;
+	unsigned long UDP_PIPE_mgmt_adptr_cmnd_timeout;
+	unsigned long UDP_PIPE_mgmt_adptr_send_passed;
+	unsigned long UDP_PIPE_mgmt_adptr_send_failed;
+	unsigned long UDP_PIPE_mgmt_not_passed_to_stack;
+	unsigned long UDP_PIPE_mgmt_passed_to_stack;
+	unsigned long UDP_PIPE_mgmt_no_socket;
+        unsigned long UDP_PIPE_mgmt_passed_to_adptr;
+} pipe_mgmt_stat_t;
+
+
+typedef struct {
+	struct sk_buff *skb;
+} bh_data_t, cmd_data_t;
+
+#define MAX_LGTH_UDP_MGNT_PKT 2000
+ 
+
+/* This is used for interrupt testing */
+#define INTR_TEST_MODE	0x02
+
+#define	WUM_SIGNATURE_L	0x50495046
+#define	WUM_SIGNATURE_H	0x444E3845
+
+#define	WUM_KILL	0x50
+#define	WUM_EXEC	0x51
+
+#define WANPIPE		0x00
+#define API		0x01
+#define BRIDGE		0x02
+#define BRIDGE_NODE	0x03
+
+#ifdef	__KERNEL__
+/****** Kernel Interface ****************************************************/
+
+#include <linux/sdladrv.h>	/* SDLA support module API definitions */
+#include <linux/sdlasfm.h>	/* SDLA firmware module definitions */
+#include <linux/workqueue.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <asm/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+
+#define	is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0)
+#define	is_alpha(ch) ((((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'z')||\
+	 	  ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'Z'))?1:0)
+#define	is_hex_digit(ch) ((((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')||\
+	 	  ((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'f')||\
+	 	  ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'F'))?1:0)
+
+
+/****** Data Structures *****************************************************/
+
+/* Adapter Data Space.
+ * This structure is needed because we handle multiple cards, otherwise
+ * static data would do it.
+ */
+typedef struct sdla
+{
+	char devname[WAN_DRVNAME_SZ+1];	/* card name */
+	sdlahw_t hw;			/* hardware configuration */
+	struct wan_device wandev;	/* WAN device data space */
+	
+	unsigned open_cnt;		/* number of open interfaces */
+	unsigned long state_tick;	/* link state timestamp */
+	unsigned intr_mode;		/* Type of Interrupt Mode */
+	char in_isr;			/* interrupt-in-service flag */
+	char buff_int_mode_unbusy;	/* flag for carrying out dev_tint */  
+	char dlci_int_mode_unbusy;	/* flag for carrying out dev_tint */
+	long configured;		/* flag for previous configurations */
+	
+	unsigned short irq_dis_if_send_count; /* Disabling irqs in if_send*/
+	unsigned short irq_dis_poll_count;   /* Disabling irqs in poll routine*/
+	unsigned short force_enable_irq;
+	char TracingEnabled;		/* flag for enabling trace */
+	global_stats_t statistics;	/* global statistics */
+	void* mbox;			/* -> mailbox */
+	void* rxmb;			/* -> receive mailbox */
+	void* flags;			/* -> adapter status flags */
+	void (*isr)(struct sdla* card);	/* interrupt service routine */
+	void (*poll)(struct sdla* card); /* polling routine */
+	int (*exec)(struct sdla* card, void* u_cmd, void* u_data);
+					/* Used by the listen() system call */		
+	/* Wanpipe Socket Interface */
+	int   (*func) (struct sk_buff *, struct sock *);
+	struct sock *sk;
+
+	/* Shutdown function */
+	void (*disable_comm) (struct sdla *card);
+
+	/* Secondary Port Device: Piggibacking */
+	struct sdla *next;
+
+	/* TTY driver variables */
+	unsigned char tty_opt;
+	struct tty_struct *tty;
+	unsigned int tty_minor;
+	unsigned int tty_open;
+	unsigned char *tty_buf;
+	unsigned char *tty_rx;
+	struct work_struct tty_work;
+	
+	union
+	{
+		struct
+		{			/****** X.25 specific data **********/
+			u32 lo_pvc;
+			u32 hi_pvc;
+			u32 lo_svc;
+			u32 hi_svc;
+			struct net_device *svc_to_dev_map[MAX_X25_LCN];
+			struct net_device *pvc_to_dev_map[MAX_X25_LCN];
+			struct net_device *tx_dev;
+			struct net_device *cmd_dev;
+			u32 no_dev;
+			volatile u8 *hdlc_buf_status;
+			u32 tx_interrupts_pending;
+                        u16 timer_int_enabled;
+			struct net_device *poll_device;
+			atomic_t command_busy;
+
+			u16 udp_pkt_lgth;
+                        u32 udp_type;
+                        u8  udp_pkt_src;
+			u32 udp_lcn;
+                        struct net_device *udp_dev;
+                        s8 udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
+
+		 	u8 LAPB_hdlc;		/* Option to turn off X25 and run only LAPB */
+			u8 logging;		/* Option to log call messages */
+			u8 oob_on_modem;	/* Option to send modem status to the api */
+			u16 num_of_ch;		/* Number of channels configured by the user */
+
+			struct work_struct x25_poll_work;
+			struct timer_list x25_timer;
+		} x;
+		struct
+		{			/****** frame relay specific data ***/
+			void* rxmb_base;	/* -> first Rx buffer */
+			void* rxmb_last;	/* -> last Rx buffer */
+			unsigned rx_base;	/* S508 receive buffer base */
+			unsigned rx_top;	/* S508 receive buffer end */
+			unsigned short node_dlci[100];
+			unsigned short dlci_num;
+                        struct net_device *dlci_to_dev_map[991 + 1];
+                        unsigned tx_interrupts_pending;
+                        unsigned short timer_int_enabled;
+                        unsigned short udp_pkt_lgth;
+                        int udp_type;
+                        char udp_pkt_src;
+                        unsigned udp_dlci;
+                        char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
+                        void* trc_el_base;      		/* first trace element */
+                        void* trc_el_last;      		/* last trace element */
+                        void *curr_trc_el;      		/* current trace element */
+                        unsigned short trc_bfr_space; 		/* trace buffer space */
+			unsigned char  update_comms_stats;
+			struct net_device *arp_dev;
+			spinlock_t if_send_lock;
+		} f;
+		struct			/****** PPP-specific data ***********/
+		{
+			char if_name[WAN_IFNAME_SZ+1];	/* interface name */
+			void* txbuf;		/* -> current Tx buffer */
+			void* txbuf_base;	/* -> first Tx buffer */
+			void* txbuf_last;	/* -> last Tx buffer */
+			void* rxbuf_base;	/* -> first Rx buffer */
+			void* rxbuf_last;	/* -> last Rx buffer */
+			unsigned rx_base;	/* S508 receive buffer base */
+			unsigned rx_top;	/* S508 receive buffer end */
+			char ip_mode;		/* STATIC/HOST/PEER IP Mode */
+			char authenticator;	/* Authenticator for PAP/CHAP */
+			unsigned char comm_enabled; /* Is comm enabled or not */
+			unsigned char peer_route;   /* Process Peer Route */	
+			unsigned long *txbuf_next;  /* Next Tx buffer to use */ 
+			unsigned long *rxbuf_next;  /* Next Rx buffer to use */
+		} p;
+		struct			/* Cisco HDLC-specific data */
+		{
+			char if_name[WAN_IFNAME_SZ+1];	/* interface name */
+			unsigned char comm_port;/* Communication Port O or 1 */
+			unsigned char usedby;  /* Used by WANPIPE or API */
+			void* rxmb;		/* Receive mail box */
+			void* flags;		/* flags */
+			void* tx_status;	/* Tx status element */
+			void* rx_status;	/* Rx status element */
+			void* txbuf;		/* -> current Tx buffer */
+			void* txbuf_base;	/* -> first Tx buffer */
+			void* txbuf_last;	/* -> last Tx buffer */
+			void* rxbuf_base;	/* -> first Rx buffer */
+			void* rxbuf_last;	/* -> last Rx buffer */
+			unsigned rx_base;	/* S508 receive buffer base */
+			unsigned rx_top;	/* S508 receive buffer end */
+			unsigned char receive_only; /* high speed receivers */
+			unsigned short protocol_options;
+			unsigned short kpalv_tx;	/* Tx kpalv timer */
+			unsigned short kpalv_rx;	/* Rx kpalv timer */
+			unsigned short kpalv_err;	/* Error tolerance */
+			unsigned short slarp_timer;	/* SLARP req timer */
+			unsigned state;			/* state of the link */
+			unsigned char api_status;
+			unsigned char update_call_count;
+			unsigned short api_options;	/* for async config */
+			unsigned char  async_mode;
+		        unsigned short tx_bits_per_char;
+		        unsigned short rx_bits_per_char;
+		        unsigned short stop_bits;
+		        unsigned short parity;
+			unsigned short break_timer;
+		        unsigned short inter_char_timer;
+		        unsigned short rx_complete_length;
+		        unsigned short xon_char;
+		        unsigned short xoff_char;
+			unsigned char comm_enabled; /* Is comm enabled or not */
+			unsigned char backup;
+		} c;
+		struct
+		{
+			void* tx_status;	/* Tx status element */
+			void* rx_status;	/* Rx status element */
+			void* trace_status;	/* Trace status element */
+			void* txbuf;		/* -> current Tx buffer */
+			void* txbuf_base;	/* -> first Tx buffer */
+			void* txbuf_last;	/* -> last Tx buffer */
+			void* rxbuf_base;	/* -> first Rx buffer */
+			void* rxbuf_last;	/* -> last Rx buffer */
+			void* tracebuf;		/* -> current Trace buffer */
+			void* tracebuf_base;	/* -> current Trace buffer */
+			void* tracebuf_last;	/* -> current Trace buffer */
+			unsigned rx_base;	/* receive buffer base */
+			unsigned rx_end;	/* receive buffer end */
+			unsigned trace_base;	/* trace buffer base */
+			unsigned trace_end;	/* trace buffer end */
+
+		} h;
+	} u;
+} sdla_t;
+
+/****** Public Functions ****************************************************/
+
+void wanpipe_open      (sdla_t* card);			/* wpmain.c */
+void wanpipe_close     (sdla_t* card);			/* wpmain.c */
+void wanpipe_set_state (sdla_t* card, int state);	/* wpmain.c */
+
+int wpx_init (sdla_t* card, wandev_conf_t* conf);	/* wpx.c */
+int wpf_init (sdla_t* card, wandev_conf_t* conf);	/* wpf.c */
+int wpp_init (sdla_t* card, wandev_conf_t* conf);	/* wpp.c */
+int wpc_init (sdla_t* card, wandev_conf_t* conf); /* Cisco HDLC */
+int bsc_init (sdla_t* card, wandev_conf_t* conf);	/* BSC streaming */
+int hdlc_init(sdla_t* card, wandev_conf_t* conf);	/* HDLC support */
+int wpft1_init (sdla_t* card, wandev_conf_t* conf);     /* FT1 Config support */
+int wsppp_init (sdla_t* card, wandev_conf_t* conf);	/* Sync PPP on top of RAW CHDLC */
+
+extern sdla_t * wanpipe_find_card(char *);
+extern sdla_t * wanpipe_find_card_num (int);
+
+extern void wanpipe_queue_work (struct work_struct *);
+extern void wanpipe_mark_bh (void);
+extern void wakeup_sk_bh(struct net_device *dev);
+extern int change_dev_flags(struct net_device *dev, unsigned flags);
+extern unsigned long get_ip_address(struct net_device *dev, int option);
+extern void add_gateway(sdla_t *card, struct net_device *dev);
+
+
+#endif	/* __KERNEL__ */
+#endif	/* _WANPIPE_H */
+
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
new file mode 100644
index 000000000000..3e89f0f15f49
--- /dev/null
+++ b/include/linux/wanrouter.h
@@ -0,0 +1,541 @@
+/*****************************************************************************
+* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
+*		This module provides API and common services for WAN Link
+*		Drivers and is completely hardware-independent.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack 	
+* Additions:	Arnaldo Melo
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
+* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
+* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
+* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
+*				WAN_DISCONNECTING state added
+* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998	David Fong	Added Cisco HDLC support.
+* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
+*				'wanif_conf_t'
+* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
+*				Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+*				Added 'enable_IPX' and 'network_number' to 
+*				'wan_device_t'.  Also added defines for
+*				UDP PACKET TYPE, Interrupt test, critical values
+*				for RACE conditions.
+* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
+*				'wan_fr_conf_t' to configure a list of dlci(s)
+*				for a NODE 
+* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997	Gene Kozin	router_devlist made public
+* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#include <linux/spinlock.h>       /* Support for SMP Locking */
+
+#ifndef	_ROUTER_H
+#define	_ROUTER_H
+
+#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
+#define	ROUTER_VERSION	1		/* version number */
+#define	ROUTER_RELEASE	1		/* release (minor version) number */
+#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
+#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
+	ROUTER_DOWN,				/* shut down device */
+	ROUTER_STAT,				/* get device status */
+	ROUTER_IFNEW,				/* add interface */
+	ROUTER_IFDEL,				/* delete interface */
+	ROUTER_IFSTAT,				/* get interface status */
+	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
+	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
+#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
+#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
+#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
+#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
+#define	NLPID_Q933	0x08	/* CCITT Q.933 */
+
+/* Miscellaneous */
+#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
+#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
+#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
+#define USED_BY_FIELD	8	/* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 	0x01
+#define UDP_FPIPE_TYPE		0x02
+#define UDP_CPIPE_TYPE		0x03
+#define UDP_DRVSTATS_TYPE 	0x04
+#define UDP_INVALID_TYPE  	0x05
+
+/* Command return code */
+#define CMD_OK		0		/* normal firmware return code */
+#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK	0x00
+#define UDP_PKT_FRM_NETWORK	0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER	100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR		0xA1
+#define CRITICAL_INTR_HANDLED	0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+	unsigned lo_pvc;	/* lowest permanent circuit number */
+	unsigned hi_pvc;	/* highest permanent circuit number */
+	unsigned lo_svc;	/* lowest switched circuit number */
+	unsigned hi_svc;	/* highest switched circuit number */
+	unsigned hdlc_window;	/* HDLC window size (1..7) */
+	unsigned pkt_window;	/* X.25 packet window size (1..7) */
+	unsigned t1;		/* HDLC timer T1, sec (1..30) */
+	unsigned t2;		/* HDLC timer T2, sec (0..29) */
+	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
+	unsigned n2;		/* HDLC retransmission limit (1..30) */
+	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
+	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
+	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
+	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
+	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
+	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
+	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
+	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
+	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
+	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
+	unsigned x25_conf_opt;   /* User defined x25 config optoins */
+	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+	unsigned char logging;   /* Control connection logging */  
+	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+	unsigned signalling;	/* local in-channel signalling type */
+	unsigned t391;		/* link integrity verification timer */
+	unsigned t392;		/* polling verification timer */
+	unsigned n391;		/* full status polling cycle counter */
+	unsigned n392;		/* error threshold counter */
+	unsigned n393;		/* monitored events counter */
+	unsigned dlci_num;	/* number of DLCs (access node) */
+	unsigned  dlci[100];    /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+	unsigned restart_tmr;	/* restart timer */
+	unsigned auth_rsrt_tmr;	/* authentication timer */
+	unsigned auth_wait_tmr;	/* authentication timer */
+	unsigned mdm_fail_tmr;	/* modem failure timer */
+	unsigned dtr_drop_tmr;	/* DTR drop timer */
+	unsigned connect_tmout;	/* connection timeout */
+	unsigned conf_retry;	/* max. retry */
+	unsigned term_retry;	/* max. retry */
+	unsigned fail_retry;	/* max. retry */
+	unsigned auth_retry;	/* max. retry */
+	unsigned auth_options;	/* authentication opt. */
+	unsigned ip_options;	/* IP options */
+	char	authenticator;	/* AUTHENTICATOR or not */
+	char	ip_mode;	/* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+	unsigned char ignore_dcd;	/* Protocol options:		*/
+	unsigned char ignore_cts;	/*  Ignore these to determine	*/
+	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
+	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+	unsigned magic;		/* magic number (for verification) */
+	unsigned config_id;	/* configuration structure identifier */
+				/****** hardware configuration ******/
+	unsigned ioport;	/* adapter I/O port base */
+	unsigned long maddr;	/* dual-port memory address */
+	unsigned msize;		/* dual-port memory size */
+	int irq;		/* interrupt request level */
+	int dma;		/* DMA request level */
+        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
+        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
+	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
+	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
+	unsigned bps;		/* data transfer rate */
+	unsigned mtu;		/* maximum transmit unit size */
+        unsigned udp_port;      /* UDP port for management */
+	unsigned char ttl;	/* Time To Live for UDP security */
+	unsigned char ft1;	/* FT1 Configurator Option */
+        char interface;		/* RS-232/V.35, etc. */
+	char clocking;		/* external/internal */
+	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;		/* DTE/DCE, primary/secondary, etc. */
+	char connection;	/* permanent/switched/on-demand */
+	char read_mode;		/* read mode: Polling or interrupt */
+	char receive_only;	/* disable tx buffers */
+	char tty;		/* Create a fake tty device */
+	unsigned tty_major;	/* Major number for wanpipe tty device */
+	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
+	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
+	char backup;		/* Backup Mode */
+	unsigned hw_opt[4];	/* other hardware options */
+	unsigned reserved[4];
+				/****** arbitrary data ***************/
+	unsigned data_size;	/* data buffer size */
+	void* data;		/* data buffer, e.g. firmware */
+	union			/****** protocol-specific ************/
+	{
+		wan_x25_conf_t x25;	/* X.25 configuration */
+		wan_ppp_conf_t ppp;	/* PPP configuration */
+		wan_fr_conf_t fr;	/* frame relay configuration */
+		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
+	} u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define	WANCONFIG_X25	101	/* X.25 link */
+#define	WANCONFIG_FR	102	/* frame relay link */
+#define	WANCONFIG_PPP	103	/* synchronous PPP link */
+#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
+#define WANCONFIG_BSC	105	/* BiSync Streaming */
+#define WANCONFIG_HDLC	106	/* HDLC Support */
+#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define	WANOPT_OFF	0
+#define	WANOPT_ON	1
+#define	WANOPT_NO	0
+#define	WANOPT_YES	1
+
+/* intercace options */
+#define	WANOPT_RS232	0
+#define	WANOPT_V35	1
+
+/* data encoding options */
+#define	WANOPT_NRZ	0
+#define	WANOPT_NRZI	1
+#define	WANOPT_FM0	2
+#define	WANOPT_FM1	3
+
+/* link type options */
+#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
+#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
+
+/* clocking options */
+#define	WANOPT_EXTERNAL	0
+#define	WANOPT_INTERNAL	1
+
+/* station options */
+#define	WANOPT_DTE		0
+#define	WANOPT_DCE		1
+#define	WANOPT_CPE		0
+#define	WANOPT_NODE		1
+#define	WANOPT_SECONDARY	0
+#define	WANOPT_PRIMARY		1
+
+/* connection options */
+#define	WANOPT_PERMANENT	0	/* DTR always active */
+#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
+#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
+#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
+#define	WANOPT_FR_LMI		3	/* LMI */
+
+/* PPP IP Mode Options */
+#define	WANOPT_PPP_STATIC	0
+#define	WANOPT_PPP_HOST		1
+#define	WANOPT_PPP_PEER		2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 		1
+#define WANOPT_TWO		2
+#define WANOPT_ONE_AND_HALF	3
+
+#define WANOPT_NONE	0
+#define WANOPT_ODD      1
+#define WANOPT_EVEN	2
+
+/* CHDLC Protocol Options */
+/* DF Commmented out for now.
+
+#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define	WANOPT_INTR	0
+#define WANOPT_POLL	1
+
+
+#define WANOPT_TTY_SYNC  0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+	unsigned state;		/* link state */
+	unsigned ndev;		/* number of configured interfaces */
+
+	/* link/interface configuration */
+	unsigned connection;	/* permanent/switched/on-demand */
+	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
+	unsigned mtu;		/* max. transmit unit for this device */
+
+	/* physical level statistics */
+	unsigned modem_status;	/* modem status */
+	unsigned rx_frames;	/* received frames count */
+	unsigned rx_overruns;	/* receiver overrun error count */
+	unsigned rx_crc_err;	/* receive CRC error count */
+	unsigned rx_aborts;	/* received aborted frames count */
+	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
+	unsigned rx_dropped;	/* frames discarded at device level */
+	unsigned tx_frames;	/* transmitted frames count */
+	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
+	unsigned tx_timeouts;	/* transmission timeouts */
+	unsigned tx_rejects;	/* other transmit errors */
+
+	/* media level statistics */
+	unsigned rx_bad_format;	/* frames with invalid format */
+	unsigned rx_bad_addr;	/* frames with invalid media address */
+	unsigned tx_retries;	/* frames re-transmitted */
+	unsigned reserved[16];	/* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+	WAN_UNCONFIGURED,	/* link/channel is not configured */
+	WAN_DISCONNECTED,	/* link/channel is disconnected */
+	WAN_CONNECTING,		/* connection is in progress */
+	WAN_CONNECTED,		/* link/channel is operational */
+	WAN_LIMIT,		/* for verification only */
+	WAN_DUALPORT,		/* for Dual Port cards */
+	WAN_DISCONNECTING,
+	WAN_FT1_READY		/* FT1 Configurator Ready */
+};
+
+enum {
+	WAN_LOCAL_IP,
+	WAN_POINTOPOINT_IP,
+	WAN_NETMASK_IP,
+	WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
+#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
+#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
+#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+	unsigned magic;			/* magic number */
+	unsigned config_id;		/* configuration identifier */
+	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
+	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
+	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
+	unsigned idle_timeout;		/* sec, before disconnecting */
+	unsigned hold_timeout;		/* sec, before re-connecting */
+	unsigned cir;			/* Committed Information Rate fwd,bwd*/
+	unsigned bc;			/* Committed Burst Size fwd, bwd */
+	unsigned be;			/* Excess Burst Size fwd, bwd */ 
+	unsigned char enable_IPX;	/* Enable or Disable IPX */
+	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
+	unsigned inarp_interval;	/* sec, between InARP requests */
+	unsigned long network_number;	/* Network Number for IPX */
+	char mc;			/* Multicast on or off */
+	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+	unsigned char port;		/* board port */
+	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
+	char pap;			/* PAP enabled or disabled */
+	char chap;			/* CHAP enabled or disabled */
+	unsigned char userid[511];	/* List of User Id */
+	unsigned char passwd[511];	/* List of passwords */
+	unsigned char sysname[31];	/* Name of the system */
+	unsigned char ignore_dcd;	/* Protocol options: */
+	unsigned char ignore_cts;	/*  Ignore these to determine */
+	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
+	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+	unsigned char ttl;		/* Time To Live for UDP security */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* maximum transmit unit size */
+	unsigned char if_down;		/* brind down interface when disconnected */
+	unsigned char gateway;		/* Is this interface a gateway */
+	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
+
+	unsigned char asy_data_trans;     /* async API options */
+        unsigned char rts_hs_for_receive; /* async Protocol options */
+        unsigned char xon_xoff_hs_for_receive;
+	unsigned char xon_xoff_hs_for_transmit;
+	unsigned char dcd_hs_for_transmit;
+	unsigned char cts_hs_for_transmit;
+	unsigned char async_mode;
+	unsigned tx_bits_per_char;
+	unsigned rx_bits_per_char;
+	unsigned stop_bits;  
+	unsigned char parity;
+ 	unsigned break_timer;
+        unsigned inter_char_timer;
+	unsigned rx_complete_length;
+	unsigned xon_char;
+	unsigned xoff_char;
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#ifdef	__KERNEL__
+/****** Kernel Interface ****************************************************/
+
+#include <linux/fs.h>		/* support for device drivers */
+#include <linux/proc_fs.h>	/* proc filesystem pragmatics */
+#include <linux/netdevice.h>	/* support for network drivers */
+/*----------------------------------------------------------------------------
+ * WAN device data space.
+ */
+struct wan_device {
+	unsigned magic;			/* magic number */
+	char* name;			/* -> WAN device name (ASCIIZ) */
+	void* private;			/* -> driver private data */
+	unsigned config_id;		/* Configuration ID */
+					/****** hardware configuration ******/
+	unsigned ioport;		/* adapter I/O port base #1 */
+	char S514_cpu_no[1];		/* PCI CPU Number */
+	unsigned char S514_slot_no;	/* PCI Slot Number */
+	unsigned long maddr;		/* dual-port memory address */
+	unsigned msize;			/* dual-port memory size */
+	int irq;			/* interrupt request level */
+	int dma;			/* DMA request level */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* max physical transmit unit size */
+	unsigned udp_port;              /* UDP port for management */
+        unsigned char ttl;		/* Time To Live for UDP security */
+	unsigned enable_tx_int; 	/* Transmit Interrupt enabled or not */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	char line_coding;		/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;			/* DTE/DCE, primary/secondary, etc. */
+	char connection;		/* permanent/switched/on-demand */
+	char signalling;		/* Signalling RS232 or V35 */
+	char read_mode;			/* read mode: Polling or interrupt */
+	char new_if_cnt;                /* Number of interfaces per wanpipe */ 
+	char del_if_cnt;		/* Number of times del_if() gets called */
+	unsigned char piggyback;        /* Piggibacking a port */
+	unsigned hw_opt[4];		/* other hardware options */
+					/****** status and statistics *******/
+	char state;			/* device state */
+	char api_status;		/* device api status */
+	struct net_device_stats stats; 	/* interface statistics */
+	unsigned reserved[16];		/* reserved for future use */
+	unsigned long critical;		/* critical section flag */
+	spinlock_t lock;                /* Support for SMP Locking */
+
+					/****** device management methods ***/
+	int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
+	int (*shutdown) (struct wan_device *wandev);
+	int (*update) (struct wan_device *wandev);
+	int (*ioctl) (struct wan_device *wandev, unsigned cmd,
+		unsigned long arg);
+	int (*new_if)(struct wan_device *wandev, struct net_device *dev,
+		      wanif_conf_t *conf);
+	int (*del_if)(struct wan_device *wandev, struct net_device *dev);
+					/****** maintained by the router ****/
+	struct wan_device* next;	/* -> next device */
+	struct net_device* dev;		/* list of network interfaces */
+	unsigned ndev;			/* number of interfaces */
+	struct proc_dir_entry *dent;	/* proc filesystem entry */
+};
+
+/* Public functions available for device drivers */
+extern int register_wan_device(struct wan_device *wandev);
+extern int unregister_wan_device(char *name);
+unsigned short wanrouter_type_trans(struct sk_buff *skb,
+				    struct net_device *dev);
+int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev,
+			  unsigned short type);
+
+/* Proc interface functions. These must not be called by the drivers! */
+extern int wanrouter_proc_init(void);
+extern void wanrouter_proc_cleanup(void);
+extern int wanrouter_proc_add(struct wan_device *wandev);
+extern int wanrouter_proc_delete(struct wan_device *wandev);
+extern int wanrouter_ioctl( struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+extern void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags);
+extern void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags);
+
+
+
+/* Public Data */
+/* list of registered devices */
+extern struct wan_device *wanrouter_router_devlist;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
new file mode 100644
index 000000000000..88ba0d29f8c8
--- /dev/null
+++ b/include/linux/watchdog.h
@@ -0,0 +1,50 @@
+/*
+ *	Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _LINUX_WATCHDOG_H
+#define _LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define	WATCHDOG_IOCTL_BASE	'W'
+
+struct watchdog_info {
+	__u32 options;		/* Options the card/driver supports */
+	__u32 firmware_version;	/* Firmware version of the card */
+	__u8  identity[32];	/* Identity of the board */
+};
+
+#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+
+#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
+#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
+
+#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
+#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
+#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
+#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
+#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
+#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
+#define WDIOF_POWEROVER		0x0040	/* Power over voltage */
+#define WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
+#define WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
+#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
+
+#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
+#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
+#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
+
+#endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wavefront.h b/include/linux/wavefront.h
new file mode 100644
index 000000000000..61bd0fd35240
--- /dev/null
+++ b/include/linux/wavefront.h
@@ -0,0 +1,675 @@
+#ifndef __wavefront_h__
+#define __wavefront_h__
+
+/* WaveFront header file.
+ *   
+ * Copyright (C) by Paul Barton-Davis 1998
+ *
+ * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.  
+ */
+
+#if (!defined(__GNUC__) && !defined(__GNUG__))
+
+     You will not be able to compile this file correctly without gcc, because
+     it is necessary to pack the "wavefront_alias" structure to a size
+     of 22 bytes, corresponding to 16-bit alignment (as would have been
+     the case on the original platform, MS-DOS). If this is not done,
+     then WavePatch-format files cannot be read/written correctly.
+     The method used to do this here ("__attribute__((packed)") is
+     completely compiler dependent.
+     
+     All other wavefront_* types end up aligned to 32 bit values and
+     still have the same (correct) size.
+
+#else
+
+     /* However, note that as of G++ 2.7.3.2, g++ was unable to
+	correctly parse *type* __attribute__ tags. It will do the
+	right thing if we use the "packed" attribute on each struct
+	member, which has the same semantics anyway. 
+     */
+
+#endif /* __GNUC__ */
+
+/***************************** WARNING ********************************
+  PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO 
+  BE USED WITH EITHER C *OR* C++.
+ **********************************************************************/
+
+#ifndef NUM_MIDIKEYS 
+#define NUM_MIDIKEYS 128
+#endif  /* NUM_MIDIKEYS */
+
+#ifndef NUM_MIDICHANNELS
+#define NUM_MIDICHANNELS 16
+#endif  /* NUM_MIDICHANNELS */
+
+/* These are very useful/important. the original wavefront interface
+   was developed on a 16 bit system, where sizeof(int) = 2
+   bytes. Defining things like this makes the code much more portable, and
+   easier to understand without having to toggle back and forth
+   between a 16-bit view of the world and a 32-bit one. 
+ */   
+
+typedef short INT16;
+typedef unsigned short UINT16;
+typedef int INT32;
+typedef unsigned int UINT32;
+typedef char CHAR8;
+typedef unsigned char UCHAR8;
+
+/* Pseudo-commands not part of the WaveFront command set.
+   These are used for various driver controls and direct
+   hardware control.
+ */
+
+#define WFC_DEBUG_DRIVER                0
+#define WFC_FX_IOCTL                    1
+#define WFC_PATCH_STATUS                2
+#define WFC_PROGRAM_STATUS              3
+#define WFC_SAMPLE_STATUS               4
+#define WFC_DISABLE_INTERRUPTS          5
+#define WFC_ENABLE_INTERRUPTS           6
+#define WFC_INTERRUPT_STATUS            7
+#define WFC_ROMSAMPLES_RDONLY           8
+#define WFC_IDENTIFY_SLOT_TYPE          9
+
+/* Wavefront synth commands
+ */
+
+#define WFC_DOWNLOAD_SAMPLE		0x80
+#define WFC_DOWNLOAD_BLOCK		0x81
+#define WFC_DOWNLOAD_MULTISAMPLE	0x82
+#define WFC_DOWNLOAD_SAMPLE_ALIAS	0x83
+#define WFC_DELETE_SAMPLE		0x84
+#define WFC_REPORT_FREE_MEMORY		0x85
+#define WFC_DOWNLOAD_PATCH		0x86
+#define WFC_DOWNLOAD_PROGRAM		0x87
+#define WFC_SET_SYNTHVOL		0x89
+#define WFC_SET_NVOICES			0x8B
+#define WFC_DOWNLOAD_DRUM		0x90
+#define WFC_GET_SYNTHVOL		0x92
+#define WFC_GET_NVOICES			0x94
+#define WFC_DISABLE_CHANNEL		0x9A
+#define WFC_ENABLE_CHANNEL		0x9B
+#define WFC_MISYNTH_OFF			0x9D
+#define WFC_MISYNTH_ON			0x9E
+#define WFC_FIRMWARE_VERSION		0x9F
+#define WFC_GET_NSAMPLES		0xA0
+#define WFC_DISABLE_DRUM_PROGRAM	0xA2
+#define WFC_UPLOAD_PATCH		0xA3
+#define WFC_UPLOAD_PROGRAM		0xA4
+#define WFC_SET_TUNING			0xA6
+#define WFC_GET_TUNING			0xA7
+#define WFC_VMIDI_ON			0xA8
+#define WFC_VMIDI_OFF			0xA9
+#define WFC_MIDI_STATUS			0xAA
+#define WFC_GET_CHANNEL_STATUS		0xAB
+#define WFC_DOWNLOAD_SAMPLE_HEADER	0xAC
+#define WFC_UPLOAD_SAMPLE_HEADER	0xAD
+#define WFC_UPLOAD_MULTISAMPLE		0xAE
+#define WFC_UPLOAD_SAMPLE_ALIAS		0xAF
+#define WFC_IDENTIFY_SAMPLE_TYPE	0xB0
+#define WFC_DOWNLOAD_EDRUM_PROGRAM	0xB1
+#define WFC_UPLOAD_EDRUM_PROGRAM	0xB2
+#define WFC_SET_EDRUM_CHANNEL		0xB3
+#define WFC_INSTOUT_LEVELS		0xB4
+#define WFC_PEAKOUT_LEVELS		0xB5
+#define WFC_REPORT_CHANNEL_PROGRAMS	0xB6
+#define WFC_HARDWARE_VERSION		0xCF
+#define WFC_UPLOAD_SAMPLE_PARAMS	0xD7
+#define WFC_DOWNLOAD_OS			0xF1
+#define WFC_NOOP                        0xFF
+
+#define WF_MAX_SAMPLE   512
+#define WF_MAX_PATCH    256
+#define WF_MAX_PROGRAM  128
+
+#define WF_SECTION_MAX  44   /* longest OS section length */
+
+/* # of bytes we send to the board when sending it various kinds of
+   substantive data, such as samples, patches and programs.
+*/
+
+#define WF_PROGRAM_BYTES 32
+#define WF_PATCH_BYTES 132
+#define WF_SAMPLE_BYTES 27
+#define WF_SAMPLE_HDR_BYTES 25
+#define WF_ALIAS_BYTES 25
+#define WF_DRUM_BYTES 9
+#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */
+
+#define WF_ACK     0x80
+#define WF_DMA_ACK 0x81
+
+/* OR-values for MIDI status bits */
+
+#define WF_MIDI_VIRTUAL_ENABLED 0x1
+#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2
+#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4
+
+/* slot indexes for struct address_info: makes code a little more mnemonic */
+
+#define WF_SYNTH_SLOT         0
+#define WF_INTERNAL_MIDI_SLOT 1
+#define WF_EXTERNAL_MIDI_SLOT 2
+
+/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401
+   emulation. Note these NEVER show up in output from the device and
+   should NEVER be used in input unless Virtual MIDI mode has been 
+   disabled. If they do show up as input, the results are unpredictable.
+*/
+
+#define WF_EXTERNAL_SWITCH  0xFD
+#define WF_INTERNAL_SWITCH  0xF9
+
+/* Debugging flags */
+
+#define WF_DEBUG_CMD 0x1
+#define WF_DEBUG_DATA 0x2
+#define WF_DEBUG_LOAD_PATCH 0x4
+#define WF_DEBUG_IO 0x8
+
+/* WavePatch file format stuff */
+
+#define WF_WAVEPATCH_VERSION     120;  /*  Current version number (1.2)  */
+#define WF_MAX_COMMENT           64    /*  Comment length */
+#define WF_NUM_LAYERS            4
+#define WF_NAME_LENGTH           32
+#define WF_SOURCE_LENGTH         260
+
+#define BankFileID     "Bank"
+#define DrumkitFileID  "DrumKit"
+#define ProgramFileID  "Program"
+
+struct wf_envelope
+{
+    UCHAR8 attack_time:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 decay1_time:7;
+    UCHAR8 Unused2:1;
+
+    UCHAR8 decay2_time:7;
+    UCHAR8 Unused3:1;
+
+    UCHAR8 sustain_time:7;
+    UCHAR8 Unused4:1;
+
+    UCHAR8 release_time:7;
+    UCHAR8 Unused5:1;
+
+    UCHAR8 release2_time:7;
+    UCHAR8 Unused6:1;
+
+    CHAR8 attack_level;
+    CHAR8 decay1_level;
+    CHAR8 decay2_level;
+    CHAR8 sustain_level;
+    CHAR8 release_level;
+
+    UCHAR8 attack_velocity:7;
+    UCHAR8 Unused7:1;
+
+    UCHAR8 volume_velocity:7;
+    UCHAR8 Unused8:1;
+
+    UCHAR8 keyboard_scaling:7;
+    UCHAR8 Unused9:1;
+};
+typedef struct wf_envelope wavefront_envelope;
+
+struct wf_lfo
+{
+    UCHAR8 sample_number;
+
+    UCHAR8 frequency:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 am_src:4;
+    UCHAR8 fm_src:4;
+
+    CHAR8 fm_amount;
+    CHAR8 am_amount;
+    CHAR8 start_level;
+    CHAR8 end_level;
+
+    UCHAR8 ramp_delay:7;
+    UCHAR8 wave_restart:1; /* for LFO2 only */
+
+    UCHAR8 ramp_time:7;
+    UCHAR8 Unused2:1;
+};
+typedef struct wf_lfo wavefront_lfo;
+
+struct wf_patch
+{
+    INT16  frequency_bias;         /*  ** THIS IS IN MOTOROLA FORMAT!! ** */
+
+    UCHAR8 amplitude_bias:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 portamento:7;
+    UCHAR8 Unused2:1;
+
+    UCHAR8 sample_number;
+
+    UCHAR8 pitch_bend:4;
+    UCHAR8 sample_msb:1;
+    UCHAR8 Unused3:3;
+
+    UCHAR8 mono:1;
+    UCHAR8 retrigger:1;
+    UCHAR8 nohold:1;
+    UCHAR8 restart:1;
+    UCHAR8 filterconfig:2; /* SDK says "not used" */
+    UCHAR8 reuse:1;
+    UCHAR8 reset_lfo:1;    
+
+    UCHAR8 fm_src2:4;
+    UCHAR8 fm_src1:4;   
+
+    CHAR8 fm_amount1;
+    CHAR8 fm_amount2;
+
+    UCHAR8 am_src:4;
+    UCHAR8 Unused4:4;
+
+    CHAR8 am_amount;
+
+    UCHAR8 fc1_mode:4;
+    UCHAR8 fc2_mode:4;
+
+    CHAR8 fc1_mod_amount;
+    CHAR8 fc1_keyboard_scaling;
+    CHAR8 fc1_bias;
+    CHAR8 fc2_mod_amount;
+    CHAR8 fc2_keyboard_scaling;
+    CHAR8 fc2_bias;
+
+    UCHAR8 randomizer:7;
+    UCHAR8 Unused5:1;
+
+    struct wf_envelope envelope1;
+    struct wf_envelope envelope2;
+    struct wf_lfo lfo1;
+    struct wf_lfo lfo2;
+};
+typedef struct wf_patch wavefront_patch;
+
+struct wf_layer
+{
+    UCHAR8 patch_number;
+
+    UCHAR8 mix_level:7;
+    UCHAR8 mute:1;
+
+    UCHAR8 split_point:7;
+    UCHAR8 play_below:1;
+
+    UCHAR8 pan_mod_src:2;
+    UCHAR8 pan_or_mod:1;
+    UCHAR8 pan:4;
+    UCHAR8 split_type:1;
+};
+typedef struct wf_layer wavefront_layer;
+
+struct wf_program
+{
+    struct wf_layer layer[WF_NUM_LAYERS];
+};
+typedef struct wf_program wavefront_program;
+
+struct wf_sample_offset
+{
+    INT32 Fraction:4;
+    INT32 Integer:20;
+    INT32 Unused:8;
+};
+typedef struct wf_sample_offset wavefront_sample_offset;          
+     
+/* Sample slot types */
+
+#define WF_ST_SAMPLE      0
+#define WF_ST_MULTISAMPLE 1
+#define WF_ST_ALIAS       2
+#define WF_ST_EMPTY       3
+
+/* pseudo's */
+
+#define WF_ST_DRUM        4
+#define WF_ST_PROGRAM     5
+#define WF_ST_PATCH       6
+#define WF_ST_SAMPLEHDR   7
+
+#define WF_ST_MASK        0xf
+
+/* Flags for slot status. These occupy the upper bits of the same byte
+   as a sample type.
+*/
+
+#define WF_SLOT_USED      0x80   /* XXX don't rely on this being accurate */
+#define WF_SLOT_FILLED    0x40
+#define WF_SLOT_ROM       0x20
+
+#define WF_SLOT_MASK      0xf0
+
+/* channel constants */
+
+#define WF_CH_MONO  0
+#define WF_CH_LEFT  1
+#define WF_CH_RIGHT 2
+
+/* Sample formats */
+
+#define LINEAR_16BIT 0
+#define WHITE_NOISE  1
+#define LINEAR_8BIT  2
+#define MULAW_8BIT   3
+
+#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2)
+
+
+/* 
+
+  Because most/all of the sample data we pass in via pointers has
+  never been copied (just mmap-ed into user space straight from the
+  disk), it would be nice to allow handling of multi-channel sample
+  data without forcing user-level extraction of the relevant bytes.
+  
+  So, we need a way of specifying which channel to use (the WaveFront
+  only handles mono samples in a given slot), and the only way to do
+  this without using some struct other than wavefront_sample as the
+  interface is the awful hack of using the unused bits in a
+  wavefront_sample:
+  
+  Val      Meaning
+  ---      -------
+  0        no channel selection (use channel 1, sample is MONO)
+  1        use first channel, and skip one
+  2        use second channel, and skip one
+  3        use third channel, and skip two
+  4        use fourth channel, skip three
+  5        use fifth channel, skip four
+  6        use six channel, skip five
+
+
+  This can handle up to 4 channels, and anyone downloading >4 channels
+  of sample data just to select one of them needs to find some tools
+  like sox ...
+
+  NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is 
+  important.
+
+*/
+
+#define WF_SET_CHANNEL(samp,chn) \
+ (samp)->Unused1 = chn & 0x1; \
+ (samp)->Unused2 = chn & 0x2; \
+ (samp)->Unused3 = chn & 0x4 
+  
+#define WF_GET_CHANNEL(samp) \
+  (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1)
+  
+typedef struct wf_sample {
+    struct wf_sample_offset sampleStartOffset;
+    struct wf_sample_offset loopStartOffset;
+    struct wf_sample_offset loopEndOffset;
+    struct wf_sample_offset sampleEndOffset;
+    INT16 FrequencyBias;
+    UCHAR8 SampleResolution:2;  /* sample_format */
+    UCHAR8 Unused1:1;
+    UCHAR8 Loop:1;
+    UCHAR8 Bidirectional:1;
+    UCHAR8 Unused2:1;
+    UCHAR8 Reverse:1;
+    UCHAR8 Unused3:1;
+} wavefront_sample;
+
+typedef struct wf_multisample {
+    INT16 NumberOfSamples;   /* log2 of the number of samples */
+    INT16 SampleNumber[NUM_MIDIKEYS];
+} wavefront_multisample;
+
+typedef struct wf_alias {
+    INT16 OriginalSample __attribute__ ((packed));
+
+    struct wf_sample_offset sampleStartOffset __attribute__ ((packed));
+    struct wf_sample_offset loopStartOffset __attribute__ ((packed));
+    struct wf_sample_offset sampleEndOffset __attribute__ ((packed));
+    struct wf_sample_offset loopEndOffset __attribute__ ((packed));
+
+    INT16  FrequencyBias __attribute__ ((packed));
+
+    UCHAR8 SampleResolution:2  __attribute__ ((packed));
+    UCHAR8 Unused1:1  __attribute__ ((packed));
+    UCHAR8 Loop:1 __attribute__ ((packed));
+    UCHAR8 Bidirectional:1  __attribute__ ((packed));
+    UCHAR8 Unused2:1 __attribute__ ((packed));
+    UCHAR8 Reverse:1 __attribute__ ((packed));
+    UCHAR8 Unused3:1 __attribute__ ((packed)); 
+    
+    /* This structure is meant to be padded only to 16 bits on their
+       original. Of course, whoever wrote their documentation didn't
+       realize that sizeof(struct) can be >=
+       sum(sizeof(struct-fields)) and so thought that giving a C level
+       description of the structs used in WavePatch files was
+       sufficient. I suppose it was, as long as you remember the 
+       standard 16->32 bit issues.
+    */
+
+    UCHAR8 sixteen_bit_padding __attribute__ ((packed));
+} wavefront_alias;
+
+typedef struct wf_drum {
+    UCHAR8 PatchNumber;
+    UCHAR8 MixLevel:7;
+    UCHAR8 Unmute:1;
+    UCHAR8 Group:4;
+    UCHAR8 Unused1:4;
+    UCHAR8 PanModSource:2;
+    UCHAR8 PanModulated:1;
+    UCHAR8 PanAmount:4;
+    UCHAR8 Unused2:1;
+} wavefront_drum;
+
+typedef struct wf_drumkit {
+    struct wf_drum drum[NUM_MIDIKEYS];
+} wavefront_drumkit;
+
+typedef struct wf_channel_programs {
+    UCHAR8 Program[NUM_MIDICHANNELS];
+} wavefront_channel_programs;
+
+/* How to get MIDI channel status from the data returned by
+   a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs)
+*/
+
+#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7))
+
+typedef union wf_any {
+    wavefront_sample s;
+    wavefront_multisample ms;
+    wavefront_alias a;
+    wavefront_program pr;
+    wavefront_patch p;
+    wavefront_drum d;
+} wavefront_any;
+
+/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h
+   might work for other wave-table based patch loading situations.
+   Alas, his fears were correct. The WaveFront doesn't even come with
+   just "patches", but several different kind of structures that
+   control the sound generation process.
+ */
+
+typedef struct wf_patch_info {
+    
+    /* the first two fields are used by the OSS "patch loading" interface
+       only, and are unused by the current user-level library.
+    */
+
+    INT16   key;               /* Use WAVEFRONT_PATCH here */
+    UINT16  devno;             /* fill in when sending */
+    UCHAR8  subkey;            /* WF_ST_{SAMPLE,ALIAS,etc.} */
+
+#define WAVEFRONT_FIND_FREE_SAMPLE_SLOT 999
+
+    UINT16  number;            /* patch/sample/prog number */
+
+    UINT32  size;              /* size of any data included in 
+				  one of the fields in `hdrptr', or
+				  as `dataptr'.
+
+				  NOTE: for actual samples, this is
+				  the size of the *SELECTED CHANNEL*
+				  even if more data is actually available.
+				  
+				  So, a stereo sample (2 channels) of
+				  6000 bytes total has `size' = 3000.
+
+				  See the macros and comments for
+				  WF_{GET,SET}_CHANNEL above.
+
+			       */
+    wavefront_any __user *hdrptr;      /* user-space ptr to hdr bytes */
+    UINT16 __user *dataptr;            /* actual sample data */
+
+    wavefront_any hdr;          /* kernel-space copy of hdr bytes */         
+} wavefront_patch_info;
+
+/* The maximum number of bytes we will ever move to or from user space
+   in response to a WFC_* command.  This obviously doesn't cover
+   actual sample data.
+*/
+
+#define WF_MAX_READ sizeof(wavefront_multisample)
+#define WF_MAX_WRITE sizeof(wavefront_multisample)
+
+/*
+   This allows us to execute any WF command except the download/upload
+   ones, which are handled differently due to copyin/copyout issues as
+   well as data-nybbling to/from the card.
+ */
+
+typedef struct wavefront_control {
+    int cmd;                           /* WFC_* */
+    char status;                       /* return status to user-space */
+    unsigned char rbuf[WF_MAX_READ];   /* bytes read from card */
+    unsigned char wbuf[WF_MAX_WRITE];  /* bytes written to card */
+} wavefront_control;
+
+#define WFCTL_WFCMD    0x1
+#define WFCTL_LOAD_SPP 0x2
+
+/* Modulator table */
+
+#define WF_MOD_LFO1      0
+#define WF_MOD_LFO2      1
+#define WF_MOD_ENV1      2
+#define WF_MOD_ENV2      3
+#define WF_MOD_KEYBOARD  4
+#define WF_MOD_LOGKEY    5
+#define WF_MOD_VELOCITY  6
+#define WF_MOD_LOGVEL    7
+#define WF_MOD_RANDOM    8
+#define WF_MOD_PRESSURE  9
+#define WF_MOD_MOD_WHEEL 10
+#define WF_MOD_1         WF_MOD_MOD_WHEEL 
+#define WF_MOD_BREATH    11
+#define WF_MOD_2         WF_MOD_BREATH
+#define WF_MOD_FOOT      12
+#define WF_MOD_4         WF_MOD_FOOT
+#define WF_MOD_VOLUME    13
+#define WF_MOD_7         WF_MOD_VOLUME
+#define WF_MOD_PAN       14
+#define WF_MOD_10        WF_MOD_PAN
+#define WF_MOD_EXPR      15
+#define WF_MOD_11        WF_MOD_EXPR
+
+/* FX-related material */
+
+typedef struct wf_fx_info {
+    int request;             /* see list below */
+    int data[4];             /* we don't need much */
+} wavefront_fx_info;
+
+/* support for each of these will be forthcoming once I or someone 
+   else has figured out which of the addresses on page 6 and page 7 of 
+   the YSS225 control each parameter. Incidentally, these come from
+   the Windows driver interface, but again, Turtle Beach didn't
+   document the API to use them.
+*/
+
+#define WFFX_SETOUTGAIN		        0
+#define WFFX_SETSTEREOOUTGAIN		1
+#define WFFX_SETREVERBIN1GAIN		2
+#define WFFX_SETREVERBIN2GAIN		3
+#define WFFX_SETREVERBIN3GAIN		4
+#define WFFX_SETCHORUSINPORT		5
+#define WFFX_SETREVERBIN1PORT		6
+#define WFFX_SETREVERBIN2PORT		7
+#define WFFX_SETREVERBIN3PORT		8
+#define WFFX_SETEFFECTPORT		9
+#define WFFX_SETAUXPORT		        10
+#define WFFX_SETREVERBTYPE		11
+#define WFFX_SETREVERBDELAY		12
+#define WFFX_SETCHORUSLFO		13
+#define WFFX_SETCHORUSPMD		14
+#define WFFX_SETCHORUSAMD		15
+#define WFFX_SETEFFECT		        16
+#define WFFX_SETBASEALL		        17
+#define WFFX_SETREVERBALL		18
+#define WFFX_SETCHORUSALL		20
+#define WFFX_SETREVERBDEF		22
+#define WFFX_SETCHORUSDEF		23
+#define WFFX_DELAYSETINGAIN		24
+#define WFFX_DELAYSETFBGAIN	        25
+#define WFFX_DELAYSETFBLPF		26
+#define WFFX_DELAYSETGAIN		27
+#define WFFX_DELAYSETTIME		28
+#define WFFX_DELAYSETFBTIME		29
+#define WFFX_DELAYSETALL		30
+#define WFFX_DELAYSETDEF		32
+#define WFFX_SDELAYSETINGAIN		33
+#define WFFX_SDELAYSETFBGAIN		34
+#define WFFX_SDELAYSETFBLPF		35
+#define WFFX_SDELAYSETGAIN		36
+#define WFFX_SDELAYSETTIME		37
+#define WFFX_SDELAYSETFBTIME		38
+#define WFFX_SDELAYSETALL		39
+#define WFFX_SDELAYSETDEF		41
+#define WFFX_DEQSETINGAIN		42
+#define WFFX_DEQSETFILTER		43
+#define WFFX_DEQSETALL		        44
+#define WFFX_DEQSETDEF		        46
+#define WFFX_MUTE		        47
+#define WFFX_FLANGESETBALANCE	        48	
+#define WFFX_FLANGESETDELAY		49
+#define WFFX_FLANGESETDWFFX_TH		50
+#define WFFX_FLANGESETFBGAIN		51
+#define WFFX_FLANGESETINGAIN		52
+#define WFFX_FLANGESETLFO		53
+#define WFFX_FLANGESETALL		54
+#define WFFX_FLANGESETDEF		56
+#define WFFX_PITCHSETSHIFT		57
+#define WFFX_PITCHSETBALANCE		58
+#define WFFX_PITCHSETALL		59
+#define WFFX_PITCHSETDEF		61
+#define WFFX_SRSSETINGAIN		62
+#define WFFX_SRSSETSPACE		63
+#define WFFX_SRSSETCENTER		64
+#define WFFX_SRSSETGAIN		        65
+#define WFFX_SRSSETMODE	        	66
+#define WFFX_SRSSETDEF		        68
+
+/* Allow direct user-space control over FX memory/coefficient data.
+   In theory this could be used to download the FX microprogram,
+   but it would be a little slower, and involve some weird code.
+ */
+
+#define WFFX_MEMSET              69
+
+#endif /* __wavefront_h__ */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
new file mode 100644
index 000000000000..2f51f2b6562e
--- /dev/null
+++ b/include/linux/wireless.h
@@ -0,0 +1,773 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	17	21.6.04
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* To minimise problems in user space, I might remove those headers
+ * at some point. Jean II */
+#include <linux/types.h>		/* for "caddr_t" et al		*/
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	17
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'odd' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+
+/* Even : get (world access), odd : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+
+#define IWEVFIRST	0x8C00
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x1	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x2
+#define IW_QUAL_NOISE_UPDATED	0x4
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	32	/* 256 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCSIWCOMMIT))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real lenght of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* Note : in the case of iw_point, the extra data will come at the
+ * end of the event */
+
+#endif	/* _LINUX_WIRELESS_H */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
new file mode 100644
index 000000000000..ff46f537ba9b
--- /dev/null
+++ b/include/linux/workqueue.h
@@ -0,0 +1,90 @@
+/*
+ * workqueue.h --- work queue handling for Linux.
+ */
+
+#ifndef _LINUX_WORKQUEUE_H
+#define _LINUX_WORKQUEUE_H
+
+#include <linux/timer.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+
+struct workqueue_struct;
+
+struct work_struct {
+	unsigned long pending;
+	struct list_head entry;
+	void (*func)(void *);
+	void *data;
+	void *wq_data;
+	struct timer_list timer;
+};
+
+#define __WORK_INITIALIZER(n, f, d) {				\
+        .entry	= { &(n).entry, &(n).entry },			\
+	.func = (f),						\
+	.data = (d),						\
+	.timer = TIMER_INITIALIZER(NULL, 0, 0),			\
+	}
+
+#define DECLARE_WORK(n, f, d)					\
+	struct work_struct n = __WORK_INITIALIZER(n, f, d)
+
+/*
+ * initialize a work-struct's func and data pointers:
+ */
+#define PREPARE_WORK(_work, _func, _data)			\
+	do {							\
+		(_work)->func = _func;				\
+		(_work)->data = _data;				\
+	} while (0)
+
+/*
+ * initialize all of a work-struct:
+ */
+#define INIT_WORK(_work, _func, _data)				\
+	do {							\
+		INIT_LIST_HEAD(&(_work)->entry);		\
+		(_work)->pending = 0;				\
+		PREPARE_WORK((_work), (_func), (_data));	\
+		init_timer(&(_work)->timer);			\
+	} while (0)
+
+extern struct workqueue_struct *__create_workqueue(const char *name,
+						    int singlethread);
+#define create_workqueue(name) __create_workqueue((name), 0)
+#define create_singlethread_workqueue(name) __create_workqueue((name), 1)
+
+extern void destroy_workqueue(struct workqueue_struct *wq);
+
+extern int FASTCALL(queue_work(struct workqueue_struct *wq, struct work_struct *work));
+extern int FASTCALL(queue_delayed_work(struct workqueue_struct *wq, struct work_struct *work, unsigned long delay));
+extern void FASTCALL(flush_workqueue(struct workqueue_struct *wq));
+
+extern int FASTCALL(schedule_work(struct work_struct *work));
+extern int FASTCALL(schedule_delayed_work(struct work_struct *work, unsigned long delay));
+
+extern int schedule_delayed_work_on(int cpu, struct work_struct *work, unsigned long delay);
+extern void flush_scheduled_work(void);
+extern int current_is_keventd(void);
+extern int keventd_up(void);
+
+extern void init_workqueues(void);
+void cancel_rearming_delayed_work(struct work_struct *work);
+
+/*
+ * Kill off a pending schedule_delayed_work().  Note that the work callback
+ * function may still be running on return from cancel_delayed_work().  Run
+ * flush_scheduled_work() to wait on it.
+ */
+static inline int cancel_delayed_work(struct work_struct *work)
+{
+	int ret;
+
+	ret = del_timer_sync(&work->timer);
+	if (ret)
+		clear_bit(0, &work->pending);
+	return ret;
+}
+
+#endif
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
new file mode 100644
index 000000000000..1262cb43c3ab
--- /dev/null
+++ b/include/linux/writeback.h
@@ -0,0 +1,118 @@
+/*
+ * include/linux/writeback.h.
+ */
+#ifndef WRITEBACK_H
+#define WRITEBACK_H
+
+struct backing_dev_info;
+
+extern spinlock_t inode_lock;
+extern struct list_head inode_in_use;
+extern struct list_head inode_unused;
+
+/*
+ * Yes, writeback.h requires sched.h
+ * No, sched.h is not included from here.
+ */
+static inline int current_is_pdflush(void)
+{
+	return current->flags & PF_FLUSHER;
+}
+
+/*
+ * fs/fs-writeback.c
+ */
+enum writeback_sync_modes {
+	WB_SYNC_NONE,	/* Don't wait on anything */
+	WB_SYNC_ALL,	/* Wait on every mapping */
+	WB_SYNC_HOLD,	/* Hold the inode on sb_dirty for sys_sync() */
+};
+
+/*
+ * A control structure which tells the writeback code what to do.  These are
+ * always on the stack, and hence need no locking.  They are always initialised
+ * in a manner such that unspecified fields are set to zero.
+ */
+struct writeback_control {
+	struct backing_dev_info *bdi;	/* If !NULL, only write back this
+					   queue */
+	enum writeback_sync_modes sync_mode;
+	unsigned long *older_than_this;	/* If !NULL, only write back inodes
+					   older than this */
+	long nr_to_write;		/* Write this many pages, and decrement
+					   this for each page written */
+	long pages_skipped;		/* Pages which were not written */
+
+	/*
+	 * For a_ops->writepages(): is start or end are non-zero then this is
+	 * a hint that the filesystem need only write out the pages inside that
+	 * byterange.  The byte at `end' is included in the writeout request.
+	 */
+	loff_t start;
+	loff_t end;
+
+	unsigned nonblocking:1;			/* Don't get stuck on request queues */
+	unsigned encountered_congestion:1;	/* An output: a queue is full */
+	unsigned for_kupdate:1;			/* A kupdate writeback */
+	unsigned for_reclaim:1;			/* Invoked from the page allocator */
+};
+
+/*
+ * ->writepage() return values (make these much larger than a pagesize, in
+ * case some fs is returning number-of-bytes-written from writepage)
+ */
+#define WRITEPAGE_ACTIVATE	0x80000	/* IO was not started: activate page */
+
+/*
+ * fs/fs-writeback.c
+ */	
+void writeback_inodes(struct writeback_control *wbc);
+void wake_up_inode(struct inode *inode);
+int inode_wait(void *);
+void sync_inodes_sb(struct super_block *, int wait);
+void sync_inodes(int wait);
+
+/* writeback.h requires fs.h; it, too, is not included from here. */
+static inline void wait_on_inode(struct inode *inode)
+{
+	might_sleep();
+	wait_on_bit(&inode->i_state, __I_LOCK, inode_wait,
+							TASK_UNINTERRUPTIBLE);
+}
+
+/*
+ * mm/page-writeback.c
+ */
+int wakeup_bdflush(long nr_pages);
+void laptop_io_completion(void);
+void laptop_sync_completion(void);
+void throttle_vm_writeout(void);
+
+/* These are exported to sysctl. */
+extern int dirty_background_ratio;
+extern int vm_dirty_ratio;
+extern int dirty_writeback_centisecs;
+extern int dirty_expire_centisecs;
+extern int block_dump;
+extern int laptop_mode;
+
+struct ctl_table;
+struct file;
+int dirty_writeback_centisecs_handler(struct ctl_table *, int, struct file *,
+				      void __user *, size_t *, loff_t *);
+
+void page_writeback_init(void);
+void balance_dirty_pages_ratelimited(struct address_space *mapping);
+int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0);
+int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
+int sync_page_range(struct inode *inode, struct address_space *mapping,
+			loff_t pos, size_t count);
+int sync_page_range_nolock(struct inode *inode, struct address_space
+		*mapping, loff_t pos, size_t count);
+
+/* pdflush.c */
+extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
+				   read-only. */
+
+
+#endif		/* WRITEBACK_H */
diff --git a/include/linux/x25.h b/include/linux/x25.h
new file mode 100644
index 000000000000..7531cfed5885
--- /dev/null
+++ b/include/linux/x25.h
@@ -0,0 +1,112 @@
+/*
+ * These are the public elements of the Linux kernel X.25 implementation.
+ *
+ * 	History
+ *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
+ *					  negotiation.
+ */
+
+#ifndef	X25_KERNEL_H
+#define	X25_KERNEL_H
+
+#define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
+#define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
+#define	SIOCX25GFACILITIES	(SIOCPROTOPRIVATE + 2)
+#define	SIOCX25SFACILITIES	(SIOCPROTOPRIVATE + 3)
+#define	SIOCX25GCALLUSERDATA	(SIOCPROTOPRIVATE + 4)
+#define	SIOCX25SCALLUSERDATA	(SIOCPROTOPRIVATE + 5)
+#define	SIOCX25GCAUSEDIAG	(SIOCPROTOPRIVATE + 6)
+
+/*
+ *	Values for {get,set}sockopt.
+ */
+#define	X25_QBITINCL		1
+
+/*
+ *	X.25 Packet Size values.
+ */
+#define	X25_PS16		4
+#define	X25_PS32		5
+#define	X25_PS64		6
+#define	X25_PS128		7
+#define	X25_PS256		8
+#define	X25_PS512		9
+#define	X25_PS1024		10
+#define	X25_PS2048		11
+#define	X25_PS4096		12
+
+/*
+ * An X.121 address, it is held as ASCII text, null terminated, up to 15
+ * digits and a null terminator.
+ */
+struct x25_address {
+	char x25_addr[16];
+};
+
+/*
+ *	Linux X.25 Address structure, used for bind, and connect mostly.
+ */
+struct sockaddr_x25 {
+	sa_family_t	   sx25_family;		/* Must be AF_X25 */
+	struct x25_address sx25_addr;		/* X.121 Address */
+};
+
+/*
+ *	DTE/DCE subscription options.
+ *
+ *      As this is missing lots of options, user should expect major
+ *	changes of this structure in 2.5.x which might break compatibilty.
+ *      The somewhat ugly dimension 200-sizeof() is needed to maintain
+ *	backward compatibility.
+ */
+struct x25_subscrip_struct {
+	char device[200-sizeof(unsigned long)];
+	unsigned long	global_facil_mask;	/* 0 to disable negotiation */
+	unsigned int	extended;
+};
+
+/* values for above global_facil_mask */
+
+#define	X25_MASK_REVERSE	0x01	
+#define	X25_MASK_THROUGHPUT	0x02
+#define	X25_MASK_PACKET_SIZE	0x04
+#define	X25_MASK_WINDOW_SIZE	0x08
+
+
+
+/*
+ *	Routing table control structure.
+ */
+struct x25_route_struct {
+	struct x25_address address;
+	unsigned int	   sigdigits;
+	char		   device[200];
+};
+
+/*
+ *	Facilities structure.
+ */
+struct x25_facilities {
+	unsigned int	winsize_in, winsize_out;
+	unsigned int	pacsize_in, pacsize_out;
+	unsigned int	throughput;
+	unsigned int	reverse;
+};
+
+/*
+ *	Call User Data structure.
+ */
+struct x25_calluserdata {
+	unsigned int	cudlength;
+	unsigned char	cuddata[128];
+};
+
+/*
+ *	Call clearing Cause and Diagnostic structure.
+ */
+struct x25_causediag {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+#endif
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
new file mode 100644
index 000000000000..23f9c61d9546
--- /dev/null
+++ b/include/linux/xattr.h
@@ -0,0 +1,33 @@
+/*
+  File: linux/xattr.h
+
+  Extended attributes handling.
+
+  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
+  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _LINUX_XATTR_H
+#define _LINUX_XATTR_H
+
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
+
+#define XATTR_SECURITY_PREFIX	"security."
+
+struct xattr_handler {
+	char *prefix;
+	size_t (*list)(struct inode *inode, char *list, size_t list_size,
+		       const char *name, size_t name_len);
+	int (*get)(struct inode *inode, const char *name, void *buffer,
+		   size_t size);
+	int (*set)(struct inode *inode, const char *name, const void *buffer,
+		   size_t size, int flags);
+};
+
+ssize_t generic_getxattr(struct dentry *dentry, const char *name, void *buffer, size_t size);
+ssize_t generic_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size);
+int generic_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags);
+int generic_removexattr(struct dentry *dentry, const char *name);
+
+#endif	/* _LINUX_XATTR_H */
diff --git a/include/linux/xattr_acl.h b/include/linux/xattr_acl.h
new file mode 100644
index 000000000000..7a1f9b93a45f
--- /dev/null
+++ b/include/linux/xattr_acl.h
@@ -0,0 +1,50 @@
+/*
+  File: linux/xattr_acl.h
+
+  (extended attribute representation of access control lists)
+
+  (C) 2000 Andreas Gruenbacher, <a.gruenbacher@computer.org>
+*/
+
+#ifndef _LINUX_XATTR_ACL_H
+#define _LINUX_XATTR_ACL_H
+
+#include <linux/posix_acl.h>
+
+#define XATTR_NAME_ACL_ACCESS	"system.posix_acl_access"
+#define XATTR_NAME_ACL_DEFAULT	"system.posix_acl_default"
+
+#define XATTR_ACL_VERSION	0x0002
+
+typedef struct {
+	__u16		e_tag;
+	__u16		e_perm;
+	__u32		e_id;
+} xattr_acl_entry;
+
+typedef struct {
+	__u32		a_version;
+	xattr_acl_entry	a_entries[0];
+} xattr_acl_header;
+
+static inline size_t xattr_acl_size(int count)
+{
+	return sizeof(xattr_acl_header) + count * sizeof(xattr_acl_entry);
+}
+
+static inline int xattr_acl_count(size_t size)
+{
+	if (size < sizeof(xattr_acl_header))
+		return -1;
+	size -= sizeof(xattr_acl_header);
+	if (size % sizeof(xattr_acl_entry))
+		return -1;
+	return size / sizeof(xattr_acl_entry);
+}
+
+struct posix_acl * posix_acl_from_xattr(const void *value, size_t size);
+int posix_acl_to_xattr(const struct posix_acl *acl, void *buffer, size_t size);
+
+
+
+#endif /* _LINUX_XATTR_ACL_H */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
new file mode 100644
index 000000000000..f0df02ae68a4
--- /dev/null
+++ b/include/linux/xfrm.h
@@ -0,0 +1,258 @@
+#ifndef _LINUX_XFRM_H
+#define _LINUX_XFRM_H
+
+#include <linux/types.h>
+
+/* All of the structures in this file may not change size as they are
+ * passed into the kernel from userspace via netlink sockets.
+ */
+
+/* Structure to encapsulate addresses. I do not want to use
+ * "standard" structure. My apologies.
+ */
+typedef union
+{
+	__u32		a4;
+	__u32		a6[4];
+} xfrm_address_t;
+
+/* Ident of a specific xfrm_state. It is used on input to lookup
+ * the state by (spi,daddr,ah/esp) or to store information about
+ * spi, protocol and tunnel address on output.
+ */
+struct xfrm_id
+{
+	xfrm_address_t	daddr;
+	__u32		spi;
+	__u8		proto;
+};
+
+/* Selector, used as selector both on policy rules (SPD) and SAs. */
+
+struct xfrm_selector
+{
+	xfrm_address_t	daddr;
+	xfrm_address_t	saddr;
+	__u16	dport;
+	__u16	dport_mask;
+	__u16	sport;
+	__u16	sport_mask;
+	__u16	family;
+	__u8	prefixlen_d;
+	__u8	prefixlen_s;
+	__u8	proto;
+	int	ifindex;
+	uid_t	user;
+};
+
+#define XFRM_INF (~(__u64)0)
+
+struct xfrm_lifetime_cfg
+{
+	__u64	soft_byte_limit;
+	__u64	hard_byte_limit;
+	__u64	soft_packet_limit;
+	__u64	hard_packet_limit;
+	__u64	soft_add_expires_seconds;
+	__u64	hard_add_expires_seconds;
+	__u64	soft_use_expires_seconds;
+	__u64	hard_use_expires_seconds;
+};
+
+struct xfrm_lifetime_cur
+{
+	__u64	bytes;
+	__u64	packets;
+	__u64	add_time;
+	__u64	use_time;
+};
+
+struct xfrm_replay_state
+{
+	__u32	oseq;
+	__u32	seq;
+	__u32	bitmap;
+};
+
+struct xfrm_algo {
+	char	alg_name[64];
+	int	alg_key_len;    /* in bits */
+	char	alg_key[0];
+};
+
+struct xfrm_stats {
+	__u32	replay_window;
+	__u32	replay;
+	__u32	integrity_failed;
+};
+
+enum
+{
+	XFRM_POLICY_IN	= 0,
+	XFRM_POLICY_OUT	= 1,
+	XFRM_POLICY_FWD	= 2,
+	XFRM_POLICY_MAX	= 3
+};
+
+enum
+{
+	XFRM_SHARE_ANY,		/* No limitations */
+	XFRM_SHARE_SESSION,	/* For this session only */
+	XFRM_SHARE_USER,	/* For this user only */
+	XFRM_SHARE_UNIQUE	/* Use once */
+};
+
+/* Netlink configuration messages.  */
+enum {
+	XFRM_MSG_BASE = 0x10,
+
+	XFRM_MSG_NEWSA = 0x10,
+#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
+	XFRM_MSG_DELSA,
+#define XFRM_MSG_DELSA XFRM_MSG_DELSA
+	XFRM_MSG_GETSA,
+#define XFRM_MSG_GETSA XFRM_MSG_GETSA
+
+	XFRM_MSG_NEWPOLICY,
+#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
+	XFRM_MSG_DELPOLICY,
+#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
+	XFRM_MSG_GETPOLICY,
+#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
+
+	XFRM_MSG_ALLOCSPI,
+#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
+	XFRM_MSG_ACQUIRE,
+#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
+	XFRM_MSG_EXPIRE,
+#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
+
+	XFRM_MSG_UPDPOLICY,
+#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
+	XFRM_MSG_UPDSA,
+#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
+
+	XFRM_MSG_POLEXPIRE,
+#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
+
+	XFRM_MSG_FLUSHSA,
+#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
+	XFRM_MSG_FLUSHPOLICY,
+#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
+
+	XFRM_MSG_MAX
+};
+
+struct xfrm_user_tmpl {
+	struct xfrm_id		id;
+	__u16			family;
+	xfrm_address_t		saddr;
+	__u32			reqid;
+	__u8			mode;
+	__u8			share;
+	__u8			optional;
+	__u32			aalgos;
+	__u32			ealgos;
+	__u32			calgos;
+};
+
+struct xfrm_encap_tmpl {
+	__u16		encap_type;
+	__u16		encap_sport;
+	__u16		encap_dport;
+	xfrm_address_t	encap_oa;
+};
+
+/* Netlink message attributes.  */
+enum xfrm_attr_type_t {
+	XFRMA_UNSPEC,
+	XFRMA_ALG_AUTH,		/* struct xfrm_algo */
+	XFRMA_ALG_CRYPT,	/* struct xfrm_algo */
+	XFRMA_ALG_COMP,		/* struct xfrm_algo */
+	XFRMA_ENCAP,		/* struct xfrm_algo + struct xfrm_encap_tmpl */
+	XFRMA_TMPL,		/* 1 or more struct xfrm_user_tmpl */
+	__XFRMA_MAX
+
+#define XFRMA_MAX (__XFRMA_MAX - 1)
+};
+
+struct xfrm_usersa_info {
+	struct xfrm_selector		sel;
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	struct xfrm_stats		stats;
+	__u32				seq;
+	__u32				reqid;
+	__u16				family;
+	__u8				mode; /* 0=transport,1=tunnel */
+	__u8				replay_window;
+	__u8				flags;
+#define XFRM_STATE_NOECN	1
+#define XFRM_STATE_DECAP_DSCP	2
+};
+
+struct xfrm_usersa_id {
+	xfrm_address_t			daddr;
+	__u32				spi;
+	__u16				family;
+	__u8				proto;
+};
+
+struct xfrm_userspi_info {
+	struct xfrm_usersa_info		info;
+	__u32				min;
+	__u32				max;
+};
+
+struct xfrm_userpolicy_info {
+	struct xfrm_selector		sel;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	__u32				priority;
+	__u32				index;
+	__u8				dir;
+	__u8				action;
+#define XFRM_POLICY_ALLOW	0
+#define XFRM_POLICY_BLOCK	1
+	__u8				flags;
+#define XFRM_POLICY_LOCALOK	1	/* Allow user to override global policy */
+	__u8				share;
+};
+
+struct xfrm_userpolicy_id {
+	struct xfrm_selector		sel;
+	__u32				index;
+	__u8				dir;
+};
+
+struct xfrm_user_acquire {
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_selector		sel;
+	struct xfrm_userpolicy_info	policy;
+	__u32				aalgos;
+	__u32				ealgos;
+	__u32				calgos;
+	__u32				seq;
+};
+
+struct xfrm_user_expire {
+	struct xfrm_usersa_info		state;
+	__u8				hard;
+};
+
+struct xfrm_user_polexpire {
+	struct xfrm_userpolicy_info	pol;
+	__u8				hard;
+};
+
+struct xfrm_usersa_flush {
+	__u8				proto;
+};
+
+#define XFRMGRP_ACQUIRE		1
+#define XFRMGRP_EXPIRE		2
+
+#endif /* _LINUX_XFRM_H */
diff --git a/include/linux/yam.h b/include/linux/yam.h
new file mode 100644
index 000000000000..7fe28228b274
--- /dev/null
+++ b/include/linux/yam.h
@@ -0,0 +1,82 @@
+/*****************************************************************************/
+
+/*
+ *	yam.h  -- YAM radio modem driver.
+ *
+ *	Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
+ *	Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Please note that the GPL allows you to use the driver, NOT the radio.
+ *  In order to use the radio, you need a license from the communications
+ *  authority of your country.
+ *
+ *
+ */
+
+/*****************************************************************************/
+
+#define SIOCYAMRESERVED	(0)
+#define SIOCYAMSCFG 	(1)	/* Set configuration */
+#define SIOCYAMGCFG 	(2)	/* Get configuration */
+#define SIOCYAMSMCS 	(3)	/* Set mcs data */
+
+#define YAM_IOBASE   (1 << 0)
+#define YAM_IRQ      (1 << 1)
+#define YAM_BITRATE  (1 << 2) /* Bit rate of radio port ->57600 */
+#define YAM_MODE     (1 << 3) /* 0=simplex 1=duplex 2=duplex+tempo */
+#define YAM_HOLDDLY  (1 << 4) /* duplex tempo (sec) */
+#define YAM_TXDELAY  (1 << 5) /* Tx Delay (ms) */
+#define YAM_TXTAIL   (1 << 6) /* Tx Tail  (ms) */
+#define YAM_PERSIST  (1 << 7) /* Persist  (ms) */
+#define YAM_SLOTTIME (1 << 8) /* Slottime (ms) */
+#define YAM_BAUDRATE (1 << 9) /* Baud rate of rs232 port ->115200 */
+
+#define YAM_MAXBITRATE  57600
+#define YAM_MAXBAUDRATE 115200
+#define YAM_MAXMODE     2
+#define YAM_MAXHOLDDLY  99
+#define YAM_MAXTXDELAY  999
+#define YAM_MAXTXTAIL   999
+#define YAM_MAXPERSIST  255
+#define YAM_MAXSLOTTIME 999
+
+#define YAM_FPGA_SIZE	5302
+
+struct yamcfg {
+	unsigned int mask;		/* Mask of commands */
+	unsigned int iobase;	/* IO Base of COM port */
+	unsigned int irq;		/* IRQ of COM port */
+	unsigned int bitrate;	/* Bit rate of radio port */
+	unsigned int baudrate;	/* Baud rate of the RS232 port */
+	unsigned int txdelay;	/* TxDelay */
+	unsigned int txtail;	/* TxTail */
+	unsigned int persist;	/* Persistence */
+	unsigned int slottime;	/* Slottime */
+	unsigned int mode;		/* mode 0 (simp), 1(Dupl), 2(Dupl+delay) */
+	unsigned int holddly;	/* PTT delay in FullDuplex 2 mode */
+};
+
+struct yamdrv_ioctl_cfg {
+	int cmd;
+	struct yamcfg cfg;
+};
+
+struct yamdrv_ioctl_mcs {
+	int cmd;
+	int bitrate;
+	unsigned char bits[YAM_FPGA_SIZE];
+};
diff --git a/include/linux/zconf.h b/include/linux/zconf.h
new file mode 100644
index 000000000000..f1cfd66b9554
--- /dev/null
+++ b/include/linux/zconf.h
@@ -0,0 +1,45 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  define MAX_MEM_LEVEL 8
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+                        /* Type declarations */
+
+typedef unsigned char  Byte;  /* 8 bits */
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+typedef void     *voidp;
+
+#endif /* _ZCONF_H */
diff --git a/include/linux/zftape.h b/include/linux/zftape.h
new file mode 100644
index 000000000000..b057c65366c6
--- /dev/null
+++ b/include/linux/zftape.h
@@ -0,0 +1,87 @@
+#ifndef _ZFTAPE_H
+#define _ZFTAPE_H
+
+/*
+ * Copyright (C) 1996, 1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/zftape.h,v $
+ * $Revision: 1.12 $
+ * $Date: 1997/10/21 11:02:37 $
+ *
+ *      Special ioctl and other global info for the zftape VFS
+ *      interface for the QIC-40/80/3010/3020 floppy-tape driver for
+ *      Linux.
+ */
+
+#define ZFTAPE_VERSION  "zftape for " FTAPE_VERSION
+
+#include <linux/ftape.h>
+
+#define ZFTAPE_LABEL       "Ftape - The Linux Floppy Tape Project!"
+
+/* Bits of the minor device number that control the operation mode */
+#define ZFT_Q80_MODE		(1 << 3)
+#define ZFT_ZIP_MODE		(1 << 4)
+#define ZFT_RAW_MODE		(1 << 5)
+#define ZFT_MINOR_OP_MASK	(ZFT_Q80_MODE	| 	\
+				 ZFT_ZIP_MODE	| 	\
+				 ZFT_RAW_MODE)
+#define ZFT_MINOR_MASK		(FTAPE_SEL_MASK		|	\
+				 ZFT_MINOR_OP_MASK	|	\
+				 FTAPE_NO_REWIND)
+
+#ifdef ZFT_OBSOLETE
+struct mtblksz {
+	unsigned int mt_blksz;
+};
+#define MTIOC_ZFTAPE_GETBLKSZ _IOR('m', 104, struct mtblksz)
+#endif
+
+#ifdef __KERNEL__
+
+extern int zft_init(void);
+
+static inline __s64 zft_div_blksz(__s64 value, __u32 blk_sz)
+{
+	if (blk_sz == 1) {
+		return value;
+	} else {
+		return (__s64)(((__u32)(value >> 10) + (blk_sz >> 10) - 1) 
+			       / (blk_sz >> 10));
+	} 
+}
+
+static inline __s64 zft_mul_blksz(__s64 value, __u32 blk_sz)
+{
+	if (blk_sz == 1) {
+		return value;
+	} else {
+		/*  if blk_sz != 1, then it is a multiple of 1024. In
+		 *  this case, `value' will also fit into 32 bits.
+		 * 
+		 *  Actually, this limits the capacity to 42
+		 *  bits. This is (2^32)*1024, roughly a thousand
+		 *  times 2GB, or 3 Terabytes. Hopefully this is enough
+		 */
+		return(__s64)(((__u32)(value)*(blk_sz>>10))<<10);
+	}
+}
+
+#endif
+
+#endif
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
new file mode 100644
index 000000000000..850076ea14d3
--- /dev/null
+++ b/include/linux/zlib.h
@@ -0,0 +1,637 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.1.3, July 9th, 1998
+
+  Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include <linux/zconf.h>
+
+#define ZLIB_VERSION "1.1.3"
+
+/* 
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+*/
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Byte    *next_in;   /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Byte    *next_out;  /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state *state; /* not visible by applications */
+
+    void     *workspace; /* memory allocated for this stream */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream *z_streamp;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PACKET_FLUSH  2
+#define Z_SYNC_FLUSH    3
+#define Z_FULL_FLUSH    4
+#define Z_FINISH        5
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+                        /* basic functions */
+
+extern const char * zlib_zlibVersion (void);
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by deflateInit and inflateInit.
+ */
+
+extern int zlib_deflate_workspacesize (void);
+/*
+   Returns the number of bytes that needs to be allocated for a per-
+   stream workspace.  A pointer to this number of bytes should be
+   returned in stream->workspace before calling zlib_deflateInit().
+*/
+
+/* 
+extern int deflateInit (z_streamp strm, int level);
+
+     Initializes the internal stream state for compression. The fields
+   zalloc, zfree and opaque must be initialized before by the caller.
+   If zalloc and zfree are set to NULL, deflateInit updates them to
+   use default allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   msg is set to null if there is no error message.  deflateInit does not
+   perform any compression: this will be done by deflate().
+*/
+
+
+extern int zlib_deflate (z_streamp strm, int flush);
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+
+  Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating avail_in or avail_out accordingly; avail_out
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
+  was enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error. After
+  deflate has returned Z_STREAM_END, the only possible operations on the
+  stream are deflateReset or deflateEnd.
+  
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step. In this case, avail_out must be at least
+  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update data_type if it can make a good guess about
+  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
+*/
+
+
+extern int zlib_deflateEnd (z_streamp strm);
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   msg may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+extern int zlib_inflate_workspacesize (void);
+/*
+   Returns the number of bytes that needs to be allocated for a per-
+   stream workspace.  A pointer to this number of bytes should be
+   returned in stream->workspace before calling zlib_inflateInit().
+*/
+
+/* 
+extern int zlib_inflateInit (z_streamp strm);
+
+     Initializes the internal stream state for decompression. The fields
+   next_in, avail_in, and workspace must be initialized before by
+   the caller. If next_in is not NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+extern int zlib_inflate (z_streamp strm, int flush);
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+  output as possible to the output buffer. The flushing behavior of inflate is
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
+  and Z_FINISH, but the current implementation actually flushes as much output
+  as possible anyway.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+     If a preset dictionary is needed at this point (see inflateSetDictionary
+  below), inflate sets strm-adler to the adler32 checksum of the
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
+  it sets strm->adler to the adler32 checksum of all output produced
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+  an error code as described below. At the end of the stream, inflate()
+  checks that its computed adler32 checksum is equal to that saved by the
+  compressor and returns Z_STREAM_END only if the checksum is correct.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
+*/
+
+
+extern int zlib_inflateEnd (z_streamp strm);
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*   
+extern int deflateInit2 (z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy);
+
+     This is another version of deflateInit with more compression options. The
+   fields next_in, zalloc, zfree and opaque must be initialized before by
+   the caller.
+
+     The method parameter is the compression method. It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to compress them better. The effect of Z_FILTERED is to force more
+   Huffman coding and less string matching; it is somewhat intermediate
+   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.
+
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
+*/
+                            
+extern int zlib_deflateSetDictionary (z_streamp strm,
+						     const Byte *dictionary,
+						     uInt  dictLength);
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
+     Upon return of this function, strm->adler is set to the Adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+extern int zlib_deflateCopy (z_streamp dest, z_streamp source);
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and
+   can consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
+extern int zlib_deflateReset (z_streamp strm);
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by deflateInit2.
+
+      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
+*/
+
+/*   
+extern int inflateInit2 (z_streamp strm, int  windowBits);
+
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. If a compressed stream with a larger window size is given as
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
+   trying to allocate a larger window.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+   memLevel). msg is set to null if there is no error message.  inflateInit2
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by inflate(). (So next_in and avail_in may be
+   modified, but next_out and avail_out are unchanged.)
+*/
+
+extern int zlib_inflateSetDictionary (z_streamp strm,
+						     const Byte *dictionary,
+						     uInt  dictLength);
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   inflate. The compressor and decompressor must use exactly the same
+   dictionary (see deflateSetDictionary).
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+extern int zlib_inflateSync (z_streamp strm);
+/* 
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
+
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+extern int zlib_inflateReset (z_streamp strm);
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int zlib_inflateIncomp (z_stream *strm);
+/*
+     This function adds the data at next_in (avail_in bytes) to the output
+   history without performing any output.  There must be no pending output,
+   and the decompressor must be expecting to see the start of a block.
+   Calling this function is equivalent to decompressing a stored block
+   containing the data at next_in (except that the data is not output).
+*/
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+extern int zlib_deflateInit_ (z_streamp strm, int level,
+                                     const char *version, int stream_size);
+extern int zlib_inflateInit_ (z_streamp strm,
+                                     const char *version, int stream_size);
+extern int zlib_deflateInit2_ (z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size);
+extern int zlib_inflateInit2_ (z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size);
+#define zlib_deflateInit(strm, level) \
+        zlib_deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+#define zlib_inflateInit(strm) \
+        zlib_inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
+#define zlib_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        zlib_deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy), ZLIB_VERSION, sizeof(z_stream))
+#define zlib_inflateInit2(strm, windowBits) \
+        zlib_inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+extern const char  * zlib_zError           (int err);
+extern int           zlib_inflateSyncPoint (z_streamp z);
+extern const uLong * zlib_get_crc_table    (void);
+
+#endif /* _ZLIB_H */
diff --git a/include/linux/zorro.h b/include/linux/zorro.h
new file mode 100644
index 000000000000..ba5b72768bbe
--- /dev/null
+++ b/include/linux/zorro.h
@@ -0,0 +1,329 @@
+/*
+ *  linux/zorro.h -- Amiga AutoConfig (Zorro) Bus Definitions
+ *
+ *  Copyright (C) 1995--2003 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _LINUX_ZORRO_H
+#define _LINUX_ZORRO_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/device.h>
+
+
+    /*
+     *  Each Zorro board has a 32-bit ID of the form
+     *
+     *      mmmmmmmmmmmmmmmmppppppppeeeeeeee
+     *
+     *  with
+     *
+     *      mmmmmmmmmmmmmmmm	16-bit Manufacturer ID (assigned by CBM (sigh))
+     *      pppppppp		8-bit Product ID (assigned by manufacturer)
+     *      eeeeeeee		8-bit Extended Product ID (currently only used
+     *				for some GVP boards)
+     */
+
+
+#define ZORRO_MANUF(id)		((id) >> 16)
+#define ZORRO_PROD(id)		(((id) >> 8) & 0xff)
+#define ZORRO_EPC(id)		((id) & 0xff)
+
+#define ZORRO_ID(manuf, prod, epc) \
+    ((ZORRO_MANUF_##manuf << 16) | ((prod) << 8) | (epc))
+
+typedef __u32 zorro_id;
+
+
+#define ZORRO_WILDCARD		(0xffffffff)	/* not official */
+
+/* Include the ID list */
+#include <linux/zorro_ids.h>
+
+
+    /*
+     *  GVP identifies most of its products through the 'extended product code'
+     *  (epc). The epc has to be ANDed with the GVP_PRODMASK before the
+     *  identification.
+     */
+
+#define GVP_PRODMASK			(0xf8)
+#define GVP_SCSICLKMASK			(0x01)
+
+enum GVP_flags {
+    GVP_IO		= 0x01,
+    GVP_ACCEL		= 0x02,
+    GVP_SCSI		= 0x04,
+    GVP_24BITDMA	= 0x08,
+    GVP_25BITDMA	= 0x10,
+    GVP_NOBANK		= 0x20,
+    GVP_14MHZ		= 0x40,
+};
+
+
+struct Node {
+    struct  Node *ln_Succ;	/* Pointer to next (successor) */
+    struct  Node *ln_Pred;	/* Pointer to previous (predecessor) */
+    __u8    ln_Type;
+    __s8    ln_Pri;		/* Priority, for sorting */
+    __s8    *ln_Name;		/* ID string, null terminated */
+} __attribute__ ((packed));
+
+struct ExpansionRom {
+    /* -First 16 bytes of the expansion ROM */
+    __u8  er_Type;		/* Board type, size and flags */
+    __u8  er_Product;		/* Product number, assigned by manufacturer */
+    __u8  er_Flags;		/* Flags */
+    __u8  er_Reserved03;	/* Must be zero ($ff inverted) */
+    __u16 er_Manufacturer;	/* Unique ID, ASSIGNED BY COMMODORE-AMIGA! */
+    __u32 er_SerialNumber;	/* Available for use by manufacturer */
+    __u16 er_InitDiagVec;	/* Offset to optional "DiagArea" structure */
+    __u8  er_Reserved0c;
+    __u8  er_Reserved0d;
+    __u8  er_Reserved0e;
+    __u8  er_Reserved0f;
+} __attribute__ ((packed));
+
+/* er_Type board type bits */
+#define ERT_TYPEMASK	0xc0
+#define ERT_ZORROII	0xc0
+#define ERT_ZORROIII	0x80
+
+/* other bits defined in er_Type */
+#define ERTB_MEMLIST	5		/* Link RAM into free memory list */
+#define ERTF_MEMLIST	(1<<5)
+
+struct ConfigDev {
+    struct Node		cd_Node;
+    __u8		cd_Flags;	/* (read/write) */
+    __u8		cd_Pad;		/* reserved */
+    struct ExpansionRom cd_Rom;		/* copy of board's expansion ROM */
+    void		*cd_BoardAddr;	/* where in memory the board was placed */
+    __u32		cd_BoardSize;	/* size of board in bytes */
+    __u16		cd_SlotAddr;	/* which slot number (PRIVATE) */
+    __u16		cd_SlotSize;	/* number of slots (PRIVATE) */
+    void		*cd_Driver;	/* pointer to node of driver */
+    struct ConfigDev	*cd_NextCD;	/* linked list of drivers to config */
+    __u32		cd_Unused[4];	/* for whatever the driver wants */
+} __attribute__ ((packed));
+
+#else /* __ASSEMBLY__ */
+
+LN_Succ		= 0
+LN_Pred		= LN_Succ+4
+LN_Type		= LN_Pred+4
+LN_Pri		= LN_Type+1
+LN_Name		= LN_Pri+1
+LN_sizeof	= LN_Name+4
+
+ER_Type		= 0
+ER_Product	= ER_Type+1
+ER_Flags	= ER_Product+1
+ER_Reserved03	= ER_Flags+1
+ER_Manufacturer	= ER_Reserved03+1
+ER_SerialNumber	= ER_Manufacturer+2
+ER_InitDiagVec	= ER_SerialNumber+4
+ER_Reserved0c	= ER_InitDiagVec+2
+ER_Reserved0d	= ER_Reserved0c+1
+ER_Reserved0e	= ER_Reserved0d+1
+ER_Reserved0f	= ER_Reserved0e+1
+ER_sizeof	= ER_Reserved0f+1
+
+CD_Node		= 0
+CD_Flags	= CD_Node+LN_sizeof
+CD_Pad		= CD_Flags+1
+CD_Rom		= CD_Pad+1
+CD_BoardAddr	= CD_Rom+ER_sizeof
+CD_BoardSize	= CD_BoardAddr+4
+CD_SlotAddr	= CD_BoardSize+4
+CD_SlotSize	= CD_SlotAddr+2
+CD_Driver	= CD_SlotSize+2
+CD_NextCD	= CD_Driver+4
+CD_Unused	= CD_NextCD+4
+CD_sizeof	= CD_Unused+(4*4)
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+#define ZORRO_NUM_AUTO		16
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+
+#include <asm/zorro.h>
+
+
+    /*
+     *  Zorro devices
+     */
+
+struct zorro_dev {
+    struct ExpansionRom rom;
+    zorro_id id;
+    struct zorro_driver *driver;	/* which driver has allocated this device */
+    struct device dev;			/* Generic device interface */
+    u16 slotaddr;
+    u16 slotsize;
+    char name[64];
+    struct resource resource;
+};
+
+#define	to_zorro_dev(n)	container_of(n, struct zorro_dev, dev)
+
+
+    /*
+     *  Zorro bus
+     */
+
+struct zorro_bus {
+    struct list_head devices;		/* list of devices on this bus */
+    unsigned int num_resources;		/* number of resources */
+    struct resource resources[4];	/* address space routed to this bus */
+    struct device dev;
+    char name[10];
+};
+
+extern struct zorro_bus zorro_bus;	/* single Zorro bus */
+extern struct bus_type zorro_bus_type;
+
+
+    /*
+     *  Zorro device IDs
+     */
+
+struct zorro_device_id {
+	zorro_id id;			/* Device ID or ZORRO_WILDCARD */
+	unsigned long driver_data;	/* Data private to the driver */
+};
+
+
+    /*
+     *  Zorro device drivers
+     */
+
+struct zorro_driver {
+    struct list_head node;
+    char *name;
+    const struct zorro_device_id *id_table;	/* NULL if wants all devices */
+    int (*probe)(struct zorro_dev *z, const struct zorro_device_id *id);	/* New device inserted */
+    void (*remove)(struct zorro_dev *z);	/* Device removed (NULL if not a hot-plug capable driver) */
+    struct device_driver driver;
+};
+
+#define	to_zorro_driver(drv)	container_of(drv, struct zorro_driver, driver)
+
+
+#define zorro_for_each_dev(dev)	\
+	for (dev = &zorro_autocon[0]; dev < zorro_autocon+zorro_num_autocon; dev++)
+
+
+/* New-style probing */
+extern int zorro_register_driver(struct zorro_driver *);
+extern void zorro_unregister_driver(struct zorro_driver *);
+extern const struct zorro_device_id *zorro_match_device(const struct zorro_device_id *ids, const struct zorro_dev *z);
+static inline struct zorro_driver *zorro_dev_driver(const struct zorro_dev *z)
+{
+    return z->driver;
+}
+
+
+extern unsigned int zorro_num_autocon;	/* # of autoconfig devices found */
+extern struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO];
+
+
+    /*
+     *  Zorro Functions
+     */
+
+extern struct zorro_dev *zorro_find_device(zorro_id id,
+					   struct zorro_dev *from);
+
+#define zorro_resource_start(z)	((z)->resource.start)
+#define zorro_resource_end(z)	((z)->resource.end)
+#define zorro_resource_len(z)	((z)->resource.end-(z)->resource.start+1)
+#define zorro_resource_flags(z)	((z)->resource.flags)
+
+#define zorro_request_device(z, name) \
+    request_mem_region(zorro_resource_start(z), zorro_resource_len(z), name)
+#define zorro_release_device(z) \
+    release_mem_region(zorro_resource_start(z), zorro_resource_len(z))
+
+/* Similar to the helpers above, these manipulate per-zorro_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *zorro_get_drvdata (struct zorro_dev *z)
+{
+	return dev_get_drvdata(&z->dev);
+}
+
+static inline void zorro_set_drvdata (struct zorro_dev *z, void *data)
+{
+	dev_set_drvdata(&z->dev, data);
+}
+
+
+/*
+ * A helper function which helps ensure correct zorro_driver
+ * setup and cleanup for commonly-encountered hotplug/modular cases
+ *
+ * This MUST stay in a header, as it checks for -DMODULE
+ */
+static inline int zorro_module_init(struct zorro_driver *drv)
+{
+	int rc = zorro_register_driver(drv);
+
+	if (rc > 0)
+		return 0;
+
+	/* iff CONFIG_HOTPLUG and built into kernel, we should
+	 * leave the driver around for future hotplug events.
+	 * For the module case, a hotplug daemon of some sort
+	 * should load a module in response to an insert event. */
+#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
+	if (rc == 0)
+		return 0;
+#else
+	if (rc == 0)
+		rc = -ENODEV;
+#endif
+
+	/* if we get here, we need to clean up Zorro driver instance
+	 * and return some sort of error */
+	zorro_unregister_driver(drv);
+
+	return rc;
+}
+
+
+    /*
+     *  Bitmask indicating portions of available Zorro II RAM that are unused
+     *  by the system. Every bit represents a 64K chunk, for a maximum of 8MB
+     *  (128 chunks, physical 0x00200000-0x009fffff).
+     *
+     *  If you want to use (= allocate) portions of this RAM, you should clear
+     *  the corresponding bits.
+     */
+
+extern DECLARE_BITMAP(zorro_unused_z2ram, 128);
+
+#define Z2RAM_START		(0x00200000)
+#define Z2RAM_END		(0x00a00000)
+#define Z2RAM_SIZE		(0x00800000)
+#define Z2RAM_CHUNKSIZE		(0x00010000)
+#define Z2RAM_CHUNKMASK		(0x0000ffff)
+#define Z2RAM_CHUNKSHIFT	(16)
+
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_ZORRO_H */
diff --git a/include/linux/zorro_ids.h b/include/linux/zorro_ids.h
new file mode 100644
index 000000000000..7e749088910d
--- /dev/null
+++ b/include/linux/zorro_ids.h
@@ -0,0 +1,552 @@
+/*
+ *  Zorro board IDs
+ *
+ *  Please keep sorted.
+ */
+
+
+#define ZORRO_MANUF_PACIFIC_PERIPHERALS				0x00D3
+#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SE_2000_A500		ZORRO_ID(PACIFIC_PERIPHERALS, 0x00, 0)
+#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SCSI			ZORRO_ID(PACIFIC_PERIPHERALS, 0x0A, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_USA_2				0x0100
+#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE			ZORRO_ID(MACROSYSTEMS_USA_2, 0x13, 0)
+
+#define ZORRO_MANUF_KUPKE_1					0x00DD
+#define  ZORRO_PROD_KUPKE_GOLEM_RAM_BOX_2MB			ZORRO_ID(KUPKE_1, 0x00, 0)
+
+#define ZORRO_MANUF_MEMPHIS					0x0100
+#define  ZORRO_PROD_MEMPHIS_STORMBRINGER			ZORRO_ID(MEMPHIS, 0x00, 0)
+
+#define ZORRO_MANUF_3_STATE					0x0200
+#define  ZORRO_PROD_3_STATE_MEGAMIX_2000			ZORRO_ID(3_STATE, 0x02, 0)
+
+#define ZORRO_MANUF_COMMODORE_BRAUNSCHWEIG			0x0201
+#define  ZORRO_PROD_CBM_A2088_A2286				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x01, 0)
+#define  ZORRO_PROD_CBM_A2286					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x02, 0)
+#define  ZORRO_PROD_CBM_A4091_1					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x54, 0)
+#define  ZORRO_PROD_CBM_A2386SX_1				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x67, 0)
+
+#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_1			0x0202
+#define  ZORRO_PROD_CBM_A2090A					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x01, 0)
+#define  ZORRO_PROD_CBM_A590_A2091_1				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x02, 0)
+#define  ZORRO_PROD_CBM_A590_A2091_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x03, 0)
+#define  ZORRO_PROD_CBM_A2090B					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x04, 0)
+#define  ZORRO_PROD_CBM_A2060					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x09, 0)
+#define  ZORRO_PROD_CBM_A590_A2052_A2058_A2091			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x0A, 0)
+#define  ZORRO_PROD_CBM_A560_RAM				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x20, 0)
+#define  ZORRO_PROD_CBM_A2232_PROTOTYPE				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x45, 0)
+#define  ZORRO_PROD_CBM_A2232					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x46, 0)
+#define  ZORRO_PROD_CBM_A2620					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x50, 0)
+#define  ZORRO_PROD_CBM_A2630					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x51, 0)
+#define  ZORRO_PROD_CBM_A4091_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x54, 0)
+#define  ZORRO_PROD_CBM_A2065_1					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x5A, 0)
+#define  ZORRO_PROD_CBM_ROMULATOR				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x60, 0)
+#define  ZORRO_PROD_CBM_A3000_TEST_FIXTURE			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x61, 0)
+#define  ZORRO_PROD_CBM_A2386SX_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x67, 0)
+#define  ZORRO_PROD_CBM_A2065_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x70, 0)
+
+#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_2			0x0203
+#define  ZORRO_PROD_CBM_A2090A_CM				ZORRO_ID(COMMODORE_WEST_CHESTER_2, 0x03, 0)
+
+#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2	0x02F4
+#define  ZORRO_PROD_PPS_EXP8000					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2, 0x02, 0)
+
+#define ZORRO_MANUF_KOLFF_COMPUTER_SUPPLIES			0x02FF
+#define  ZORRO_PROD_KCS_POWER_PC_BOARD				ZORRO_ID(KOLFF_COMPUTER_SUPPLIES, 0x00, 0)
+
+#define ZORRO_MANUF_CARDCO_1					0x03EC
+#define  ZORRO_PROD_CARDCO_KRONOS_2000_1			ZORRO_ID(CARDCO_1, 0x04, 0)
+#define  ZORRO_PROD_CARDCO_A1000_1				ZORRO_ID(CARDCO_1, 0x0C, 0)
+#define  ZORRO_PROD_CARDCO_ESCORT				ZORRO_ID(CARDCO_1, 0x0E, 0)
+#define  ZORRO_PROD_CARDCO_A2410				ZORRO_ID(CARDCO_1, 0xF5, 0)
+
+#define ZORRO_MANUF_A_SQUARED					0x03ED
+#define  ZORRO_PROD_A_SQUARED_LIVE_2000				ZORRO_ID(A_SQUARED, 0x01, 0)
+
+#define ZORRO_MANUF_COMSPEC_COMMUNICATIONS			0x03EE
+#define  ZORRO_PROD_COMSPEC_COMMUNICATIONS_AX2000		ZORRO_ID(COMSPEC_COMMUNICATIONS, 0x01, 0)
+
+#define ZORRO_MANUF_ANAKIN_RESEARCH				0x03F1
+#define  ZORRO_PROD_ANAKIN_RESEARCH_EASYL			ZORRO_ID(ANAKIN_RESEARCH, 0x01, 0)
+
+#define ZORRO_MANUF_MICROBOTICS					0x03F2
+#define  ZORRO_PROD_MICROBOTICS_STARBOARD_II			ZORRO_ID(MICROBOTICS, 0x00, 0)
+#define  ZORRO_PROD_MICROBOTICS_STARDRIVE			ZORRO_ID(MICROBOTICS, 0x02, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_UP_A				ZORRO_ID(MICROBOTICS, 0x03, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_UP_Z				ZORRO_ID(MICROBOTICS, 0x04, 0)
+#define  ZORRO_PROD_MICROBOTICS_DELTA_RAM			ZORRO_ID(MICROBOTICS, 0x20, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_STAR_RAM			ZORRO_ID(MICROBOTICS, 0x40, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_STAR				ZORRO_ID(MICROBOTICS, 0x41, 0)
+#define  ZORRO_PROD_MICROBOTICS_VXL_RAM_32			ZORRO_ID(MICROBOTICS, 0x44, 0)
+#define  ZORRO_PROD_MICROBOTICS_VXL_68030			ZORRO_ID(MICROBOTICS, 0x45, 0)
+#define  ZORRO_PROD_MICROBOTICS_DELTA				ZORRO_ID(MICROBOTICS, 0x60, 0)
+#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z_RAM		ZORRO_ID(MICROBOTICS, 0x81, 0)
+#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_1		ZORRO_ID(MICROBOTICS, 0x96, 0)
+#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_2		ZORRO_ID(MICROBOTICS, 0x9E, 0)
+#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z			ZORRO_ID(MICROBOTICS, 0xC1, 0)
+
+#define ZORRO_MANUF_ACCESS_ASSOCIATES_ALEGRA			0x03F4
+
+#define ZORRO_MANUF_EXPANSION_TECHNOLOGIES			0x03F6
+
+#define ZORRO_MANUF_ASDG					0x03FF
+#define  ZORRO_PROD_ASDG_MEMORY_1				ZORRO_ID(ASDG, 0x01, 0)
+#define  ZORRO_PROD_ASDG_MEMORY_2				ZORRO_ID(ASDG, 0x02, 0)
+#define  ZORRO_PROD_ASDG_EB920_LAN_ROVER			ZORRO_ID(ASDG, 0xFE, 0)
+#define  ZORRO_PROD_ASDG_GPIB_DUALIEEE488_TWIN_X		ZORRO_ID(ASDG, 0xFF, 0)
+
+#define ZORRO_MANUF_IMTRONICS_1					0x0404
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_1			ZORRO_ID(IMTRONICS_1, 0x39, 0)
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_2			ZORRO_ID(IMTRONICS_1, 0x57, 0)
+
+#define ZORRO_MANUF_CBM_UNIVERSITY_OF_LOWELL			0x0406
+#define  ZORRO_PROD_CBM_A2410					ZORRO_ID(CBM_UNIVERSITY_OF_LOWELL, 0x00, 0)
+
+#define ZORRO_MANUF_AMERISTAR					0x041D
+#define  ZORRO_PROD_AMERISTAR_A2065				ZORRO_ID(AMERISTAR, 0x01, 0)
+#define  ZORRO_PROD_AMERISTAR_A560				ZORRO_ID(AMERISTAR, 0x09, 0)
+#define  ZORRO_PROD_AMERISTAR_A4066				ZORRO_ID(AMERISTAR, 0x0A, 0)
+
+#define ZORRO_MANUF_SUPRA					0x0420
+#define  ZORRO_PROD_SUPRA_SUPRADRIVE_4x4			ZORRO_ID(SUPRA, 0x01, 0)
+#define  ZORRO_PROD_SUPRA_1000_RAM				ZORRO_ID(SUPRA, 0x02, 0)
+#define  ZORRO_PROD_SUPRA_2000_DMA				ZORRO_ID(SUPRA, 0x03, 0)
+#define  ZORRO_PROD_SUPRA_500					ZORRO_ID(SUPRA, 0x05, 0)
+#define  ZORRO_PROD_SUPRA_500_SCSI				ZORRO_ID(SUPRA, 0x08, 0)
+#define  ZORRO_PROD_SUPRA_500XP_2000_RAM			ZORRO_ID(SUPRA, 0x09, 0)
+#define  ZORRO_PROD_SUPRA_500RX_2000_RAM			ZORRO_ID(SUPRA, 0x0A, 0)
+#define  ZORRO_PROD_SUPRA_2400ZI				ZORRO_ID(SUPRA, 0x0B, 0)
+#define  ZORRO_PROD_SUPRA_500XP_SUPRADRIVE_WORDSYNC		ZORRO_ID(SUPRA, 0x0C, 0)
+#define  ZORRO_PROD_SUPRA_SUPRADRIVE_WORDSYNC_II		ZORRO_ID(SUPRA, 0x0D, 0)
+#define  ZORRO_PROD_SUPRA_2400ZIPLUS				ZORRO_ID(SUPRA, 0x10, 0)
+
+#define ZORRO_MANUF_COMPUTER_SYSTEMS_ASSOCIATES			0x0422
+#define  ZORRO_PROD_CSA_MAGNUM					ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x11, 0)
+#define  ZORRO_PROD_CSA_12_GAUGE				ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x15, 0)
+
+#define ZORRO_MANUF_MARC_MICHAEL_GROTH				0x0439
+
+#define ZORRO_MANUF_M_TECH					0x0502
+#define  ZORRO_PROD_MTEC_AT500_1				ZORRO_ID(M_TECH, 0x03, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_1			0x06E1
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I				ZORRO_ID(GREAT_VALLEY_PRODUCTS_1, 0x08, 0)
+
+#define ZORRO_MANUF_BYTEBOX					0x07DA
+#define  ZORRO_PROD_BYTEBOX_A500				ZORRO_ID(BYTEBOX, 0x00, 0)
+
+#define ZORRO_MANUF_DKB_POWER_COMPUTING				0x07DC
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_SECUREKEY		ZORRO_ID(DKB_POWER_COMPUTING, 0x09, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_3128		ZORRO_ID(DKB_POWER_COMPUTING, 0x0E, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_RAPID_FIRE		ZORRO_ID(DKB_POWER_COMPUTING, 0x0F, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_1202		ZORRO_ID(DKB_POWER_COMPUTING, 0x10, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_COBRA_VIPER_II_68EC030	ZORRO_ID(DKB_POWER_COMPUTING, 0x12, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_1		ZORRO_ID(DKB_POWER_COMPUTING, 0x17, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_2		ZORRO_ID(DKB_POWER_COMPUTING, 0xFF, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_2			0x07E1
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_4K			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x01, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x02, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_3			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x03, 0)
+#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x08, 0)
+#define  ZORRO_PROD_GVP_IMPACT_3001_RAM				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x09, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0A, 0)
+#define  ZORRO_PROD_GVP_EPC_BASE				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0)
+#define  ZORRO_PROD_GVP_GFORCE_040_1				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x20)
+#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x30)
+#define  ZORRO_PROD_GVP_A1291					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x40)
+#define  ZORRO_PROD_GVP_COMBO_030_R4				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x60)
+#define  ZORRO_PROD_GVP_COMBO_030_R4_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x70)
+#define  ZORRO_PROD_GVP_PHONEPAK				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x78)
+#define  ZORRO_PROD_GVP_IO_EXTENDER				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x98)
+#define  ZORRO_PROD_GVP_GFORCE_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xa0)
+#define  ZORRO_PROD_GVP_GFORCE_030_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xb0)
+#define  ZORRO_PROD_GVP_A530					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xc0)
+#define  ZORRO_PROD_GVP_A530_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xd0)
+#define  ZORRO_PROD_GVP_COMBO_030_R3				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xe0)
+#define  ZORRO_PROD_GVP_COMBO_030_R3_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf0)
+#define  ZORRO_PROD_GVP_SERIES_II				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf8)
+#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)
+/*#define  ZORRO_PROD_GVP_A2000_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
+/*#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
+#define  ZORRO_PROD_GVP_GFORCE_040_060				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x16, 0)
+#define  ZORRO_PROD_GVP_IMPACT_VISION_24			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x20, 0)
+#define  ZORRO_PROD_GVP_GFORCE_040_2				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0xFF, 0)
+
+#define ZORRO_MANUF_CALIFORNIA_ACCESS_SYNERGY			0x07E5
+#define  ZORRO_PROD_CALIFORNIA_ACCESS_SYNERGY_MALIBU		ZORRO_ID(CALIFORNIA_ACCESS_SYNERGY, 0x01, 0)
+
+#define ZORRO_MANUF_XETEC					0x07E6
+#define  ZORRO_PROD_XETEC_FASTCARD				ZORRO_ID(XETEC, 0x01, 0)
+#define  ZORRO_PROD_XETEC_FASTCARD_RAM				ZORRO_ID(XETEC, 0x02, 0)
+#define  ZORRO_PROD_XETEC_FASTCARD_PLUS				ZORRO_ID(XETEC, 0x03, 0)
+
+#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS		0x07EA
+#define  ZORRO_PROD_PPS_MERCURY					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x00, 0)
+#define  ZORRO_PROD_PPS_A3000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_PPS_A2000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x69, 0)
+#define  ZORRO_PROD_PPS_ZEUS					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x96, 0)
+#define  ZORRO_PROD_PPS_A500_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0xBB, 0)
+
+#define ZORRO_MANUF_XEBEC					0x07EC
+
+#define ZORRO_MANUF_SPIRIT_TECHNOLOGY				0x07F2
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN1000		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x01, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN500		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x02, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_SIN500			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x03, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_HDA_506			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x04, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_AX_S			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x05, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_OCTABYTE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x06, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INMATE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x08, 0)
+
+#define ZORRO_MANUF_SPIRIT_TECHNOLOGY_2				0x07F3
+
+#define ZORRO_MANUF_BSC_ALFADATA_1				0x07FE
+#define  ZORRO_PROD_BSC_ALF_3_1					ZORRO_ID(BSC_ALFADATA_1, 0x03, 0)
+
+#define ZORRO_MANUF_BSC_ALFADATA_2				0x0801
+#define  ZORRO_PROD_BSC_ALF_2_1					ZORRO_ID(BSC_ALFADATA_2, 0x01, 0)
+#define  ZORRO_PROD_BSC_ALF_2_2					ZORRO_ID(BSC_ALFADATA_2, 0x02, 0)
+#define  ZORRO_PROD_BSC_ALF_3_2					ZORRO_ID(BSC_ALFADATA_2, 0x03, 0)
+
+#define ZORRO_MANUF_CARDCO_2					0x0802
+#define  ZORRO_PROD_CARDCO_KRONOS_2000_2			ZORRO_ID(CARDCO_2, 0x04, 0)
+#define  ZORRO_PROD_CARDCO_A1000_2				ZORRO_ID(CARDCO_2, 0x0C, 0)
+
+#define ZORRO_MANUF_JOCHHEIM					0x0804
+#define  ZORRO_PROD_JOCHHEIM_RAM				ZORRO_ID(JOCHHEIM, 0x01, 0)
+
+#define ZORRO_MANUF_CHECKPOINT_TECHNOLOGIES			0x0807
+#define  ZORRO_PROD_CHECKPOINT_TECHNOLOGIES_SERIAL_SOLUTION	ZORRO_ID(CHECKPOINT_TECHNOLOGIES, 0x00, 0)
+
+#define ZORRO_MANUF_EDOTRONIK					0x0810
+#define  ZORRO_PROD_EDOTRONIK_IEEE_488				ZORRO_ID(EDOTRONIK, 0x01, 0)
+#define  ZORRO_PROD_EDOTRONIK_8032				ZORRO_ID(EDOTRONIK, 0x02, 0)
+#define  ZORRO_PROD_EDOTRONIK_MULTISERIAL			ZORRO_ID(EDOTRONIK, 0x03, 0)
+#define  ZORRO_PROD_EDOTRONIK_VIDEODIGITIZER			ZORRO_ID(EDOTRONIK, 0x04, 0)
+#define  ZORRO_PROD_EDOTRONIK_PARALLEL_IO			ZORRO_ID(EDOTRONIK, 0x05, 0)
+#define  ZORRO_PROD_EDOTRONIK_PIC_PROTOYPING			ZORRO_ID(EDOTRONIK, 0x06, 0)
+#define  ZORRO_PROD_EDOTRONIK_ADC				ZORRO_ID(EDOTRONIK, 0x07, 0)
+#define  ZORRO_PROD_EDOTRONIK_VME				ZORRO_ID(EDOTRONIK, 0x08, 0)
+#define  ZORRO_PROD_EDOTRONIK_DSP96000				ZORRO_ID(EDOTRONIK, 0x09, 0)
+
+#define ZORRO_MANUF_NES_INC					0x0813
+#define  ZORRO_PROD_NES_INC_RAM					ZORRO_ID(NES_INC, 0x00, 0)
+
+#define ZORRO_MANUF_ICD						0x0817
+#define  ZORRO_PROD_ICD_ADVANTAGE_2000_SCSI			ZORRO_ID(ICD, 0x01, 0)
+#define  ZORRO_PROD_ICD_ADVANTAGE_IDE				ZORRO_ID(ICD, 0x03, 0)
+#define  ZORRO_PROD_ICD_ADVANTAGE_2080_RAM			ZORRO_ID(ICD, 0x04, 0)
+
+#define ZORRO_MANUF_KUPKE_2					0x0819
+#define  ZORRO_PROD_KUPKE_OMTI					ZORRO_ID(KUPKE_2, 0x01, 0)
+#define  ZORRO_PROD_KUPKE_SCSI_II				ZORRO_ID(KUPKE_2, 0x02, 0)
+#define  ZORRO_PROD_KUPKE_GOLEM_BOX				ZORRO_ID(KUPKE_2, 0x03, 0)
+#define  ZORRO_PROD_KUPKE_030_882				ZORRO_ID(KUPKE_2, 0x04, 0)
+#define  ZORRO_PROD_KUPKE_SCSI_AT				ZORRO_ID(KUPKE_2, 0x05, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_3			0x081D
+#define  ZORRO_PROD_GVP_A2000_RAM8				ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x09, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x0A, 0)
+
+#define ZORRO_MANUF_INTERWORKS_NETWORK				0x081E
+
+#define ZORRO_MANUF_HARDITAL_SYNTHESIS				0x0820
+#define  ZORRO_PROD_HARDITAL_SYNTHESIS_TQM_68030_68882		ZORRO_ID(HARDITAL_SYNTHESIS, 0x14, 0)
+
+#define ZORRO_MANUF_APPLIED_ENGINEERING				0x0828
+#define  ZORRO_PROD_APPLIED_ENGINEERING_DL2000			ZORRO_ID(APPLIED_ENGINEERING, 0x10, 0)
+#define  ZORRO_PROD_APPLIED_ENGINEERING_RAM_WORKS		ZORRO_ID(APPLIED_ENGINEERING, 0xE0, 0)
+
+#define ZORRO_MANUF_BSC_ALFADATA_3				0x082C
+#define  ZORRO_PROD_BSC_OKTAGON_2008				ZORRO_ID(BSC_ALFADATA_3, 0x05, 0)
+#define  ZORRO_PROD_BSC_TANDEM_AT_2008_508			ZORRO_ID(BSC_ALFADATA_3, 0x06, 0)
+#define  ZORRO_PROD_BSC_ALFA_RAM_1200				ZORRO_ID(BSC_ALFADATA_3, 0x07, 0)
+#define  ZORRO_PROD_BSC_OKTAGON_2008_RAM			ZORRO_ID(BSC_ALFADATA_3, 0x08, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_I				ZORRO_ID(BSC_ALFADATA_3, 0x10, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_II				ZORRO_ID(BSC_ALFADATA_3, 0x11, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_III				ZORRO_ID(BSC_ALFADATA_3, 0x12, 0)
+#define  ZORRO_PROD_BSC_FRAMEMASTER_II				ZORRO_ID(BSC_ALFADATA_3, 0x20, 0)
+#define  ZORRO_PROD_BSC_GRAFFITI_RAM				ZORRO_ID(BSC_ALFADATA_3, 0x21, 0)
+#define  ZORRO_PROD_BSC_GRAFFITI_REG				ZORRO_ID(BSC_ALFADATA_3, 0x22, 0)
+#define  ZORRO_PROD_BSC_ISDN_MASTERCARD				ZORRO_ID(BSC_ALFADATA_3, 0x40, 0)
+#define  ZORRO_PROD_BSC_ISDN_MASTERCARD_II			ZORRO_ID(BSC_ALFADATA_3, 0x41, 0)
+
+#define ZORRO_MANUF_PHOENIX					0x0835
+#define  ZORRO_PROD_PHOENIX_ST506				ZORRO_ID(PHOENIX, 0x21, 0)
+#define  ZORRO_PROD_PHOENIX_SCSI				ZORRO_ID(PHOENIX, 0x22, 0)
+#define  ZORRO_PROD_PHOENIX_RAM					ZORRO_ID(PHOENIX, 0xBE, 0)
+
+#define ZORRO_MANUF_ADVANCED_STORAGE_SYSTEMS			0x0836
+#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS_RAM		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x08, 0)
+
+#define ZORRO_MANUF_IMPULSE					0x0838
+#define  ZORRO_PROD_IMPULSE_FIRECRACKER_24			ZORRO_ID(IMPULSE, 0x00, 0)
+
+#define ZORRO_MANUF_IVS						0x0840
+#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_2				ZORRO_ID(IVS, 0x02, 0)
+#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_1				ZORRO_ID(IVS, 0x04, 0)
+#define  ZORRO_PROD_IVS_OVERDRIVE				ZORRO_ID(IVS, 0x10, 0)
+#define  ZORRO_PROD_IVS_TRUMPCARD_CLASSIC			ZORRO_ID(IVS, 0x30, 0)
+#define  ZORRO_PROD_IVS_TRUMPCARD_PRO_GRANDSLAM			ZORRO_ID(IVS, 0x34, 0)
+#define  ZORRO_PROD_IVS_META_4					ZORRO_ID(IVS, 0x40, 0)
+#define  ZORRO_PROD_IVS_WAVETOOLS				ZORRO_ID(IVS, 0xBF, 0)
+#define  ZORRO_PROD_IVS_VECTOR_1				ZORRO_ID(IVS, 0xF3, 0)
+#define  ZORRO_PROD_IVS_VECTOR_2				ZORRO_ID(IVS, 0xF4, 0)
+
+#define ZORRO_MANUF_VECTOR_1					0x0841
+#define  ZORRO_PROD_VECTOR_CONNECTION_1				ZORRO_ID(VECTOR_1, 0xE3, 0)
+
+#define ZORRO_MANUF_XPERT_PRODEV				0x0845
+#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_RAM			ZORRO_ID(XPERT_PRODEV, 0x01, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_REG			ZORRO_ID(XPERT_PRODEV, 0x02, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_RAM			ZORRO_ID(XPERT_PRODEV, 0x03, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_1			ZORRO_ID(XPERT_PRODEV, 0x04, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_2			ZORRO_ID(XPERT_PRODEV, 0xC9, 0)
+
+#define ZORRO_MANUF_HYDRA_SYSTEMS				0x0849
+#define  ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET			ZORRO_ID(HYDRA_SYSTEMS, 0x01, 0)
+
+#define ZORRO_MANUF_SUNRIZE_INDUSTRIES				0x084F
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD1012			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x01, 0)
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD516			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x02, 0)
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_DD512			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x03, 0)
+
+#define ZORRO_MANUF_TRICERATOPS					0x0850
+#define  ZORRO_PROD_TRICERATOPS_MULTI_IO			ZORRO_ID(TRICERATOPS, 0x01, 0)
+
+#define ZORRO_MANUF_APPLIED_MAGIC				0x0851
+#define  ZORRO_PROD_APPLIED_MAGIC_DMI_RESOLVER			ZORRO_ID(APPLIED_MAGIC, 0x01, 0)
+#define  ZORRO_PROD_APPLIED_MAGIC_DIGITAL_BROADCASTER		ZORRO_ID(APPLIED_MAGIC, 0x06, 0)
+
+#define ZORRO_MANUF_GFX_BASE					0x085E
+#define  ZORRO_PROD_GFX_BASE_GDA_1_VRAM				ZORRO_ID(GFX_BASE, 0x00, 0)
+#define  ZORRO_PROD_GFX_BASE_GDA_1				ZORRO_ID(GFX_BASE, 0x01, 0)
+
+#define ZORRO_MANUF_ROCTEC					0x0860
+#define  ZORRO_PROD_ROCTEC_RH_800C				ZORRO_ID(ROCTEC, 0x01, 0)
+#define  ZORRO_PROD_ROCTEC_RH_800C_RAM				ZORRO_ID(ROCTEC, 0x01, 0)
+
+#define ZORRO_MANUF_KATO					0x0861
+#define  ZORRO_PROD_KATO_MELODY					ZORRO_ID(KATO, 0x80, 0)
+/* ID clash!! */
+#define ZORRO_MANUF_HELFRICH_1					0x0861
+#define  ZORRO_PROD_HELFRICH_RAINBOW_II				ZORRO_ID(HELFRICH_1, 0x20, 0)
+#define  ZORRO_PROD_HELFRICH_RAINBOW_III			ZORRO_ID(HELFRICH_1, 0x21, 0)
+
+#define ZORRO_MANUF_ATLANTIS					0x0862
+
+#define ZORRO_MANUF_PROTAR					0x0864
+
+#define ZORRO_MANUF_ACS						0x0865
+
+#define ZORRO_MANUF_SOFTWARE_RESULTS_ENTERPRISES		0x0866
+#define  ZORRO_PROD_SOFTWARE_RESULTS_ENTERPRISES_GOLDEN_GATE_2_BUS_PLUS	ZORRO_ID(SOFTWARE_RESULTS_ENTERPRISES, 0x01, 0)
+
+#define ZORRO_MANUF_MASOBOSHI					0x086D
+#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_SC201			ZORRO_ID(MASOBOSHI, 0x03, 0)
+#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_MC702			ZORRO_ID(MASOBOSHI, 0x04, 0)
+#define  ZORRO_PROD_MASOBOSHI_MVD_819				ZORRO_ID(MASOBOSHI, 0x07, 0)
+
+#define ZORRO_MANUF_MAINHATTAN_DATA				0x086F
+#define  ZORRO_PROD_MAINHATTAN_DATA_IDE				ZORRO_ID(MAINHATTAN_DATA, 0x01, 0)
+
+#define ZORRO_MANUF_VILLAGE_TRONIC				0x0877
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_RAM			ZORRO_ID(VILLAGE_TRONIC, 0x01, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_REG			ZORRO_ID(VILLAGE_TRONIC, 0x02, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_16M_PROTOTYPE		ZORRO_ID(VILLAGE_TRONIC, 0x03, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM	ZORRO_ID(VILLAGE_TRONIC, 0x0B, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG	ZORRO_ID(VILLAGE_TRONIC, 0x0C, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_SEGMENTED_MODE	ZORRO_ID(VILLAGE_TRONIC, 0x0D, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_MEM1		ZORRO_ID(VILLAGE_TRONIC, 0x15, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_MEM2		ZORRO_ID(VILLAGE_TRONIC, 0x16, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG		ZORRO_ID(VILLAGE_TRONIC, 0x17, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3		ZORRO_ID(VILLAGE_TRONIC, 0x18, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE			ZORRO_ID(VILLAGE_TRONIC, 0xC9, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2			ZORRO_ID(VILLAGE_TRONIC, 0xCA, 0)
+
+#define ZORRO_MANUF_UTILITIES_UNLIMITED				0x087B
+#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE		ZORRO_ID(UTILITIES_UNLIMITED, 0x15, 0)
+#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE2		ZORRO_ID(UTILITIES_UNLIMITED, 0x20, 0)
+
+#define ZORRO_MANUF_AMITRIX					0x0880
+#define  ZORRO_PROD_AMITRIX_MULTI_IO				ZORRO_ID(AMITRIX, 0x01, 0)
+#define  ZORRO_PROD_AMITRIX_CD_RAM				ZORRO_ID(AMITRIX, 0x02, 0)
+
+#define ZORRO_MANUF_ARMAX					0x0885
+#define  ZORRO_PROD_ARMAX_OMNIBUS				ZORRO_ID(ARMAX, 0x00, 0)
+
+#define ZORRO_MANUF_ZEUS					0x088D
+#define  ZORRO_PROD_ZEUS_SPIDER					ZORRO_ID(ZEUS, 0x04, 0)
+
+#define ZORRO_MANUF_NEWTEK					0x088F
+#define  ZORRO_PROD_NEWTEK_VIDEOTOASTER				ZORRO_ID(NEWTEK, 0x00, 0)
+
+#define ZORRO_MANUF_M_TECH_GERMANY				0x0890
+#define  ZORRO_PROD_MTEC_AT500_2				ZORRO_ID(M_TECH_GERMANY, 0x01, 0)
+#define  ZORRO_PROD_MTEC_68030					ZORRO_ID(M_TECH_GERMANY, 0x03, 0)
+#define  ZORRO_PROD_MTEC_68020I					ZORRO_ID(M_TECH_GERMANY, 0x06, 0)
+#define  ZORRO_PROD_MTEC_A1200_T68030_RTC			ZORRO_ID(M_TECH_GERMANY, 0x20, 0)
+#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530		ZORRO_ID(M_TECH_GERMANY, 0x21, 0)
+#define  ZORRO_PROD_MTEC_8_MB_RAM				ZORRO_ID(M_TECH_GERMANY, 0x22, 0)
+#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE	ZORRO_ID(M_TECH_GERMANY, 0x24, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_4			0x0891
+#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x01, 0)
+#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x02, 0)
+
+#define ZORRO_MANUF_APOLLO_1					0x0892
+#define  ZORRO_PROD_APOLLO_A1200				ZORRO_ID(APOLLO_1, 0x01, 0)
+
+#define ZORRO_MANUF_HELFRICH_2					0x0893
+#define  ZORRO_PROD_HELFRICH_PICCOLO_RAM			ZORRO_ID(HELFRICH_2, 0x05, 0)
+#define  ZORRO_PROD_HELFRICH_PICCOLO_REG			ZORRO_ID(HELFRICH_2, 0x06, 0)
+#define  ZORRO_PROD_HELFRICH_PEGGY_PLUS_MPEG			ZORRO_ID(HELFRICH_2, 0x07, 0)
+#define  ZORRO_PROD_HELFRICH_VIDEOCRUNCHER			ZORRO_ID(HELFRICH_2, 0x08, 0)
+#define  ZORRO_PROD_HELFRICH_SD64_RAM				ZORRO_ID(HELFRICH_2, 0x0A, 0)
+#define  ZORRO_PROD_HELFRICH_SD64_REG				ZORRO_ID(HELFRICH_2, 0x0B, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_USA				0x089B
+#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx		ZORRO_ID(MACROSYSTEMS_USA, 0x13, 0)
+
+#define ZORRO_MANUF_ELBOX_COMPUTER				0x089E
+#define  ZORRO_PROD_ELBOX_COMPUTER_1200_4			ZORRO_ID(ELBOX_COMPUTER, 0x06, 0)
+
+#define ZORRO_MANUF_HARMS_PROFESSIONAL				0x0A00
+#define  ZORRO_PROD_HARMS_PROFESSIONAL_030_PLUS			ZORRO_ID(HARMS_PROFESSIONAL, 0x10, 0)
+#define  ZORRO_PROD_HARMS_PROFESSIONAL_3500			ZORRO_ID(HARMS_PROFESSIONAL, 0xD0, 0)
+
+#define ZORRO_MANUF_MICRONIK					0x0A50
+#define  ZORRO_PROD_MICRONIK_RCA_120				ZORRO_ID(MICRONIK, 0x0A, 0)
+
+#define ZORRO_MANUF_MICRONIK2					0x0F0F
+#define  ZORRO_PROD_MICRONIK2_Z3I				ZORRO_ID(MICRONIK2, 0x01, 0)
+
+#define ZORRO_MANUF_MEGAMICRO					0x1000
+#define  ZORRO_PROD_MEGAMICRO_SCRAM_500				ZORRO_ID(MEGAMICRO, 0x03, 0)
+#define  ZORRO_PROD_MEGAMICRO_SCRAM_500_RAM			ZORRO_ID(MEGAMICRO, 0x04, 0)
+
+#define ZORRO_MANUF_IMTRONICS_2					0x1028
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_3			ZORRO_ID(IMTRONICS_2, 0x39, 0)
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_4			ZORRO_ID(IMTRONICS_2, 0x57, 0)
+
+/* unofficial ID */
+#define ZORRO_MANUF_INDIVIDUAL_COMPUTERS			0x1212
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x00, 0)
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x17, 0)
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL		ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x2A, 0)
+
+#define ZORRO_MANUF_KUPKE_3					0x1248
+#define  ZORRO_PROD_KUPKE_GOLEM_HD_3000				ZORRO_ID(KUPKE_3, 0x01, 0)
+
+#define ZORRO_MANUF_ITH						0x1388
+#define  ZORRO_PROD_ITH_ISDN_MASTER_II				ZORRO_ID(ITH, 0x01, 0)
+
+#define ZORRO_MANUF_VMC						0x1389
+#define  ZORRO_PROD_VMC_ISDN_BLASTER_Z2				ZORRO_ID(VMC, 0x01, 0)
+#define  ZORRO_PROD_VMC_HYPERCOM_4				ZORRO_ID(VMC, 0x02, 0)
+
+#define ZORRO_MANUF_INFORMATION					0x157C
+#define  ZORRO_PROD_INFORMATION_ISDN_ENGINE_I			ZORRO_ID(INFORMATION, 0x64, 0)
+
+#define ZORRO_MANUF_VORTEX					0x2017
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80386SX			ZORRO_ID(VORTEX, 0x07, 0)
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_RAM			ZORRO_ID(VORTEX, 0x08, 0)
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80486			ZORRO_ID(VORTEX, 0x09, 0)
+
+#define ZORRO_MANUF_EXPANSION_SYSTEMS				0x2062
+#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX		ZORRO_ID(EXPANSION_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX_RAM	ZORRO_ID(EXPANSION_SYSTEMS, 0x02, 0)
+
+#define ZORRO_MANUF_READYSOFT					0x2100
+#define  ZORRO_PROD_READYSOFT_AMAX_II_IV			ZORRO_ID(READYSOFT, 0x01, 0)
+
+#define ZORRO_MANUF_PHASE5					0x2140
+#define  ZORRO_PROD_PHASE5_BLIZZARD_RAM				ZORRO_ID(PHASE5, 0x01, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD				ZORRO_ID(PHASE5, 0x02, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_IV			ZORRO_ID(PHASE5, 0x06, 0)
+#define  ZORRO_PROD_PHASE5_FASTLANE_Z3_RAM			ZORRO_ID(PHASE5, 0x0A, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060	ZORRO_ID(PHASE5, 0x0B, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM		ZORRO_ID(PHASE5, 0x0C, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230			ZORRO_ID(PHASE5, 0x0D, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260		ZORRO_ID(PHASE5, 0x11, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_2060			ZORRO_ID(PHASE5, 0x18, 0)
+#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_II			ZORRO_ID(PHASE5, 0x19, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64			ZORRO_ID(PHASE5, 0x22, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D_PROTOTYPE		ZORRO_ID(PHASE5, 0x32, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D			ZORRO_ID(PHASE5, 0x43, 0)
+#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_III			ZORRO_ID(PHASE5, 0x64, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS			ZORRO_ID(PHASE5, 0x6e, 0)
+
+#define ZORRO_MANUF_DPS						0x2169
+#define  ZORRO_PROD_DPS_PERSONAL_ANIMATION_RECORDER		ZORRO_ID(DPS, 0x01, 0)
+
+#define ZORRO_MANUF_APOLLO_2					0x2200
+#define  ZORRO_PROD_APOLLO_A620_68020_1				ZORRO_ID(APOLLO_2, 0x00, 0)
+#define  ZORRO_PROD_APOLLO_A620_68020_2				ZORRO_ID(APOLLO_2, 0x01, 0)
+
+#define ZORRO_MANUF_APOLLO_3					0x2222
+#define  ZORRO_PROD_APOLLO_AT_APOLLO				ZORRO_ID(APOLLO_3, 0x22, 0)
+#define  ZORRO_PROD_APOLLO_1230_1240_1260_2030_4040_4060	ZORRO_ID(APOLLO_3, 0x23, 0)
+
+#define ZORRO_MANUF_PETSOFF_LP					0x38A5
+#define  ZORRO_PROD_PETSOFF_LP_DELFINA				ZORRO_ID(PETSOFF_LP, 0x00, 0)
+#define  ZORRO_PROD_PETSOFF_LP_DELFINA_LITE			ZORRO_ID(PETSOFF_LP, 0x01, 0)
+
+#define ZORRO_MANUF_UWE_GERLACH					0x3FF7
+#define  ZORRO_PROD_UWE_GERLACH_RAM_ROM				ZORRO_ID(UWE_GERLACH, 0xd4, 0)
+
+#define ZORRO_MANUF_ACT						0x4231
+#define  ZORRO_PROD_ACT_PRELUDE					ZORRO_ID(ACT, 0x01, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_GERMANY			0x4754
+#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x03, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_VLAB				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x04, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO_PRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x05, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_RETINA				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x06, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_MULTI_EVOLUTION		ZORRO_ID(MACROSYSTEMS_GERMANY, 0x08, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_TOCCATA			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x0C, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_RETINA_Z3			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x10, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_VLAB_MOTION			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x12, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_ALTAIS				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x13, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_FALCON_040			ZORRO_ID(MACROSYSTEMS_GERMANY, 0xFD, 0)
+
+#define ZORRO_MANUF_COMBITEC					0x6766
+
+#define ZORRO_MANUF_SKI_PERIPHERALS				0x8000
+#define  ZORRO_PROD_SKI_PERIPHERALS_MAST_FIREBALL		ZORRO_ID(SKI_PERIPHERALS, 0x08, 0)
+#define  ZORRO_PROD_SKI_PERIPHERALS_SCSI_DUAL_SERIAL		ZORRO_ID(SKI_PERIPHERALS, 0x80, 0)
+
+#define ZORRO_MANUF_REIS_WARE_2					0xA9AD
+#define  ZORRO_PROD_REIS_WARE_SCAN_KING				ZORRO_ID(REIS_WARE_2, 0x11, 0)
+
+#define ZORRO_MANUF_CAMERON					0xAA01
+#define  ZORRO_PROD_CAMERON_PERSONAL_A4				ZORRO_ID(CAMERON, 0x10, 0)
+
+#define ZORRO_MANUF_REIS_WARE					0xAA11
+#define  ZORRO_PROD_REIS_WARE_HANDYSCANNER			ZORRO_ID(REIS_WARE, 0x11, 0)
+
+#define ZORRO_MANUF_PHOENIX_2					0xB5A8
+#define  ZORRO_PROD_PHOENIX_ST506_2				ZORRO_ID(PHOENIX_2, 0x21, 0)
+#define  ZORRO_PROD_PHOENIX_SCSI_2				ZORRO_ID(PHOENIX_2, 0x22, 0)
+#define  ZORRO_PROD_PHOENIX_RAM_2				ZORRO_ID(PHOENIX_2, 0xBE, 0)
+
+#define ZORRO_MANUF_COMBITEC_2					0xC008
+#define  ZORRO_PROD_COMBITEC_HD					ZORRO_ID(COMBITEC_2, 0x2A, 0)
+#define  ZORRO_PROD_COMBITEC_SRAM				ZORRO_ID(COMBITEC_2, 0x2B, 0)
+
+
+    /*
+     *  Test and illegal Manufacturer IDs.
+     */
+
+#define ZORRO_MANUF_HACKER					0x07DB
+#define  ZORRO_PROD_GENERAL_PROTOTYPE				ZORRO_ID(HACKER, 0x00, 0)
+#define  ZORRO_PROD_HACKER_SCSI					ZORRO_ID(HACKER, 0x01, 0)
+#define  ZORRO_PROD_RESOURCE_MANAGEMENT_FORCE_QUICKNET_QN2000	ZORRO_ID(HACKER, 0x02, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_2				ZORRO_ID(HACKER, 0xE0, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_3				ZORRO_ID(HACKER, 0xE1, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_4				ZORRO_ID(HACKER, 0xE2, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_5				ZORRO_ID(HACKER, 0xE3, 0)
diff --git a/include/linux/zutil.h b/include/linux/zutil.h
new file mode 100644
index 000000000000..fdfd5ed41ec4
--- /dev/null
+++ b/include/linux/zutil.h
@@ -0,0 +1,119 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: zutil.h,v 1.1 2000/01/01 03:32:23 davem Exp $ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include <linux/zlib.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+        /* Common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+         /* functions */
+
+typedef uLong (*check_func) (uLong check, const Byte *buf,
+				       uInt len);
+
+
+                        /* checksum functions */
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+static inline uLong zlib_adler32(uLong adler,
+				 const Byte *buf,
+				 uInt len)
+{
+    unsigned long s1 = adler & 0xffff;
+    unsigned long s2 = (adler >> 16) & 0xffff;
+    int k;
+
+    if (buf == NULL) return 1L;
+
+    while (len > 0) {
+        k = len < NMAX ? len : NMAX;
+        len -= k;
+        while (k >= 16) {
+            DO16(buf);
+	    buf += 16;
+            k -= 16;
+        }
+        if (k != 0) do {
+            s1 += *buf++;
+	    s2 += s1;
+        } while (--k);
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+    return (s2 << 16) | s1;
+}
+
+#endif /* _Z_UTIL_H */
diff --git a/include/math-emu/double.h b/include/math-emu/double.h
new file mode 100644
index 000000000000..655ccf1c4739
--- /dev/null
+++ b/include/math-emu/double.h
@@ -0,0 +1,205 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Double Precision
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_DOUBLE_H__
+#define    __MATH_EMU_DOUBLE_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel kid.  Go buy yourself a real computer."
+#endif
+
+#if _FP_W_TYPE_SIZE < 64
+#define _FP_FRACTBITS_D		(2 * _FP_W_TYPE_SIZE)
+#else
+#define _FP_FRACTBITS_D		_FP_W_TYPE_SIZE
+#endif
+
+#define _FP_FRACBITS_D		53
+#define _FP_FRACXBITS_D		(_FP_FRACTBITS_D - _FP_FRACBITS_D)
+#define _FP_WFRACBITS_D		(_FP_WORKBITS + _FP_FRACBITS_D)
+#define _FP_WFRACXBITS_D	(_FP_FRACTBITS_D - _FP_WFRACBITS_D)
+#define _FP_EXPBITS_D		11
+#define _FP_EXPBIAS_D		1023
+#define _FP_EXPMAX_D		2047
+
+#define _FP_QNANBIT_D		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE)
+#define _FP_IMPLBIT_D		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE)
+#define _FP_OVERFLOW_D		\
+	((_FP_W_TYPE)1 << _FP_WFRACBITS_D % _FP_W_TYPE_SIZE)
+
+#if _FP_W_TYPE_SIZE < 64
+
+union _FP_UNION_D
+{
+  double flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign  : 1;
+    unsigned exp   : _FP_EXPBITS_D;
+    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
+    unsigned frac0 : _FP_W_TYPE_SIZE;
+#else
+    unsigned frac0 : _FP_W_TYPE_SIZE;
+    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
+    unsigned exp   : _FP_EXPBITS_D;
+    unsigned sign  : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_D(X)		_FP_DECL(2,X)
+#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_2(D,X,val)
+#define FP_UNPACK_RAW_DP(X,val)	_FP_UNPACK_RAW_2_P(D,X,val)
+#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_2(D,val,X)
+#define FP_PACK_RAW_DP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(D,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_D(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2(D,X,val);		\
+    _FP_UNPACK_CANONICAL(D,2,X);	\
+  } while (0)
+
+#define FP_UNPACK_DP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2_P(D,X,val);	\
+    _FP_UNPACK_CANONICAL(D,2,X);	\
+  } while (0)
+
+#define FP_PACK_D(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,2,X);		\
+    _FP_PACK_RAW_2(D,val,X);		\
+  } while (0)
+
+#define FP_PACK_DP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,2,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(D,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_D(X)		_FP_ISSIGNAN(D,2,X)
+#define FP_NEG_D(R,X)			_FP_NEG(D,2,R,X)
+#define FP_ADD_D(R,X,Y)			_FP_ADD(D,2,R,X,Y)
+#define FP_SUB_D(R,X,Y)			_FP_SUB(D,2,R,X,Y)
+#define FP_MUL_D(R,X,Y)			_FP_MUL(D,2,R,X,Y)
+#define FP_DIV_D(R,X,Y)			_FP_DIV(D,2,R,X,Y)
+#define FP_SQRT_D(R,X)			_FP_SQRT(D,2,R,X)
+#define _FP_SQRT_MEAT_D(R,S,T,X,Q)	_FP_SQRT_MEAT_2(R,S,T,X,Q)
+
+#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,2,r,X,Y,un)
+#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,2,r,X,Y)
+
+#define FP_TO_INT_D(r,X,rsz,rsg)	_FP_TO_INT(D,2,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_D(r,X,rsz,rsg)	_FP_TO_INT_ROUND(D,2,r,X,rsz,rsg)
+#define FP_FROM_INT_D(X,r,rs,rt)	_FP_FROM_INT(D,2,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_D(X)	_FP_FRAC_HIGH_2(X)
+#define _FP_FRAC_HIGH_RAW_D(X)	_FP_FRAC_HIGH_2(X)
+
+#else
+
+union _FP_UNION_D
+{
+  double flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign : 1;
+    unsigned exp  : _FP_EXPBITS_D;
+    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
+#else
+    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
+    unsigned exp  : _FP_EXPBITS_D;
+    unsigned sign : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_D(X)		_FP_DECL(1,X)
+#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_1(D,X,val)
+#define FP_UNPACK_RAW_DP(X,val)	_FP_UNPACK_RAW_1_P(D,X,val)
+#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_1(D,val,X)
+#define FP_PACK_RAW_DP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(D,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_D(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1(D,X,val);		\
+    _FP_UNPACK_CANONICAL(D,1,X);	\
+  } while (0)
+
+#define FP_UNPACK_DP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1_P(D,X,val);	\
+    _FP_UNPACK_CANONICAL(D,1,X);	\
+  } while (0)
+
+#define FP_PACK_D(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,1,X);		\
+    _FP_PACK_RAW_1(D,val,X);		\
+  } while (0)
+
+#define FP_PACK_DP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,1,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(D,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_D(X)		_FP_ISSIGNAN(D,1,X)
+#define FP_NEG_D(R,X)			_FP_NEG(D,1,R,X)
+#define FP_ADD_D(R,X,Y)			_FP_ADD(D,1,R,X,Y)
+#define FP_SUB_D(R,X,Y)			_FP_SUB(D,1,R,X,Y)
+#define FP_MUL_D(R,X,Y)			_FP_MUL(D,1,R,X,Y)
+#define FP_DIV_D(R,X,Y)			_FP_DIV(D,1,R,X,Y)
+#define FP_SQRT_D(R,X)			_FP_SQRT(D,1,R,X)
+#define _FP_SQRT_MEAT_D(R,S,T,X,Q)	_FP_SQRT_MEAT_1(R,S,T,X,Q)
+
+/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by
+   the target machine.  */
+
+#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,1,r,X,Y,un)
+#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,1,r,X,Y)
+
+#define FP_TO_INT_D(r,X,rsz,rsg)	_FP_TO_INT(D,1,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_D(r,X,rsz,rsg)	_FP_TO_INT_ROUND(D,1,r,X,rsz,rsg)
+#define FP_FROM_INT_D(X,r,rs,rt)	_FP_FROM_INT(D,1,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_D(X)	_FP_FRAC_HIGH_1(X)
+#define _FP_FRAC_HIGH_RAW_D(X)	_FP_FRAC_HIGH_1(X)
+
+#endif /* W_TYPE_SIZE < 64 */
+
+
+#endif /* __MATH_EMU_DOUBLE_H__ */
diff --git a/include/math-emu/extended.h b/include/math-emu/extended.h
new file mode 100644
index 000000000000..84770fceb53e
--- /dev/null
+++ b/include/math-emu/extended.h
@@ -0,0 +1,396 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Extended Precision.
+   Copyright (C) 1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Jakub Jelinek (jj@ultra.linux.cz).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#ifndef    __MATH_EMU_EXTENDED_H__
+#define    __MATH_EMU_EXTENDED_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel, kid. Go buy yourself a real computer."
+#endif
+
+#if _FP_W_TYPE_SIZE < 64
+#define _FP_FRACTBITS_E         (4*_FP_W_TYPE_SIZE)
+#else
+#define _FP_FRACTBITS_E		(2*_FP_W_TYPE_SIZE)
+#endif
+
+#define _FP_FRACBITS_E		64
+#define _FP_FRACXBITS_E		(_FP_FRACTBITS_E - _FP_FRACBITS_E)
+#define _FP_WFRACBITS_E		(_FP_WORKBITS + _FP_FRACBITS_E)
+#define _FP_WFRACXBITS_E	(_FP_FRACTBITS_E - _FP_WFRACBITS_E)
+#define _FP_EXPBITS_E		15
+#define _FP_EXPBIAS_E		16383
+#define _FP_EXPMAX_E		32767
+
+#define _FP_QNANBIT_E		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_E-2) % _FP_W_TYPE_SIZE)
+#define _FP_IMPLBIT_E		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_E-1) % _FP_W_TYPE_SIZE)
+#define _FP_OVERFLOW_E		\
+	((_FP_W_TYPE)1 << (_FP_WFRACBITS_E % _FP_W_TYPE_SIZE))
+
+#if _FP_W_TYPE_SIZE < 64
+
+union _FP_UNION_E
+{
+   long double flt;
+   struct 
+   {
+#if __BYTE_ORDER == __BIG_ENDIAN
+      unsigned long pad1 : _FP_W_TYPE_SIZE;
+      unsigned long pad2 : (_FP_W_TYPE_SIZE - 1 - _FP_EXPBITS_E);
+      unsigned long sign : 1;
+      unsigned long exp : _FP_EXPBITS_E;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+#else
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned exp : _FP_EXPBITS_E;
+      unsigned sign : 1;
+#endif /* not bigendian */
+   } bits __attribute__((packed));
+};
+
+
+#define FP_DECL_E(X)		_FP_DECL(4,X)
+
+#define FP_UNPACK_RAW_E(X, val)				\
+  do {							\
+    union _FP_UNION_E _flo; _flo.flt = (val);		\
+							\
+    X##_f[2] = 0; X##_f[3] = 0;				\
+    X##_f[0] = _flo.bits.frac0;				\
+    X##_f[1] = _flo.bits.frac1;				\
+    X##_e  = _flo.bits.exp;				\
+    X##_s  = _flo.bits.sign;				\
+    if (!X##_e && (X##_f[1] || X##_f[0])		\
+        && !(X##_f[1] & _FP_IMPLBIT_E))			\
+      {							\
+        X##_e++;					\
+        FP_SET_EXCEPTION(FP_EX_DENORM);			\
+      }							\
+  } while (0)
+
+#define FP_UNPACK_RAW_EP(X, val)			\
+  do {							\
+    union _FP_UNION_E *_flo =				\
+    (union _FP_UNION_E *)(val);				\
+							\
+    X##_f[2] = 0; X##_f[3] = 0;				\
+    X##_f[0] = _flo->bits.frac0;			\
+    X##_f[1] = _flo->bits.frac1;			\
+    X##_e  = _flo->bits.exp;				\
+    X##_s  = _flo->bits.sign;				\
+    if (!X##_e && (X##_f[1] || X##_f[0])		\
+        && !(X##_f[1] & _FP_IMPLBIT_E))			\
+      {							\
+        X##_e++;					\
+        FP_SET_EXCEPTION(FP_EX_DENORM);			\
+      }							\
+  } while (0)
+
+#define FP_PACK_RAW_E(val, X)				\
+  do {							\
+    union _FP_UNION_E _flo;				\
+							\
+    if (X##_e) X##_f[1] |= _FP_IMPLBIT_E;		\
+    else X##_f[1] &= ~(_FP_IMPLBIT_E);			\
+    _flo.bits.frac0 = X##_f[0];				\
+    _flo.bits.frac1 = X##_f[1];				\
+    _flo.bits.exp   = X##_e;				\
+    _flo.bits.sign  = X##_s;				\
+							\
+    (val) = _flo.flt;					\
+  } while (0)
+
+#define FP_PACK_RAW_EP(val, X)				\
+  do {							\
+    if (!FP_INHIBIT_RESULTS)				\
+      {							\
+	union _FP_UNION_E *_flo =			\
+	  (union _FP_UNION_E *)(val);			\
+							\
+	if (X##_e) X##_f[1] |= _FP_IMPLBIT_E;		\
+	else X##_f[1] &= ~(_FP_IMPLBIT_E);		\
+	_flo->bits.frac0 = X##_f[0];			\
+	_flo->bits.frac1 = X##_f[1];			\
+	_flo->bits.exp   = X##_e;			\
+	_flo->bits.sign  = X##_s;			\
+      }							\
+  } while (0)
+
+#define FP_UNPACK_E(X,val)		\
+  do {					\
+    FP_UNPACK_RAW_E(X,val);		\
+    _FP_UNPACK_CANONICAL(E,4,X);	\
+  } while (0)
+
+#define FP_UNPACK_EP(X,val)		\
+  do {					\
+    FP_UNPACK_RAW_2_P(X,val);		\
+    _FP_UNPACK_CANONICAL(E,4,X);	\
+  } while (0)
+
+#define FP_PACK_E(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(E,4,X);		\
+    FP_PACK_RAW_E(val,X);		\
+  } while (0)
+
+#define FP_PACK_EP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(E,4,X);		\
+    FP_PACK_RAW_EP(val,X);		\
+  } while (0)
+
+#define FP_ISSIGNAN_E(X)	_FP_ISSIGNAN(E,4,X)
+#define FP_NEG_E(R,X)		_FP_NEG(E,4,R,X)
+#define FP_ADD_E(R,X,Y)		_FP_ADD(E,4,R,X,Y)
+#define FP_SUB_E(R,X,Y)		_FP_SUB(E,4,R,X,Y)
+#define FP_MUL_E(R,X,Y)		_FP_MUL(E,4,R,X,Y)
+#define FP_DIV_E(R,X,Y)		_FP_DIV(E,4,R,X,Y)
+#define FP_SQRT_E(R,X)		_FP_SQRT(E,4,R,X)
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ * This has special _E version because standard _4 square
+ * root would not work (it has to start normally with the
+ * second word and not the first), but as we have to do it
+ * anyway, we optimize it by doing most of the calculations
+ * in two UWtype registers instead of four.
+ */
+ 
+#define _FP_SQRT_MEAT_E(R, S, T, X, q)			\
+  do {							\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
+    _FP_FRAC_SRL_4(X, (_FP_WORKBITS));			\
+    while (q)						\
+      {							\
+	T##_f[1] = S##_f[1] + q;			\
+	if (T##_f[1] <= X##_f[1])			\
+	  {						\
+	    S##_f[1] = T##_f[1] + q;			\
+	    X##_f[1] -= T##_f[1];			\
+	    R##_f[1] += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
+    while (q)						\
+      {							\
+	T##_f[0] = S##_f[0] + q;			\
+	T##_f[1] = S##_f[1];				\
+	if (T##_f[1] < X##_f[1] || 			\
+	    (T##_f[1] == X##_f[1] &&			\
+	     T##_f[0] <= X##_f[0]))			\
+	  {						\
+	    S##_f[0] = T##_f[0] + q;			\
+	    S##_f[1] += (T##_f[0] > S##_f[0]);		\
+	    _FP_FRAC_DEC_2(X, T);			\
+	    R##_f[0] += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    _FP_FRAC_SLL_4(R, (_FP_WORKBITS));			\
+    if (X##_f[0] | X##_f[1])				\
+      {							\
+	if (S##_f[1] < X##_f[1] || 			\
+	    (S##_f[1] == X##_f[1] &&			\
+	     S##_f[0] < X##_f[0]))			\
+	  R##_f[0] |= _FP_WORK_ROUND;			\
+	R##_f[0] |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+
+#define FP_CMP_E(r,X,Y,un)	_FP_CMP(E,4,r,X,Y,un)
+#define FP_CMP_EQ_E(r,X,Y)	_FP_CMP_EQ(E,4,r,X,Y)
+
+#define FP_TO_INT_E(r,X,rsz,rsg)	_FP_TO_INT(E,4,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_E(r,X,rsz,rsg)	_FP_TO_INT_ROUND(E,4,r,X,rsz,rsg)
+#define FP_FROM_INT_E(X,r,rs,rt)	_FP_FROM_INT(E,4,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_E(X)	(X##_f[2])
+#define _FP_FRAC_HIGH_RAW_E(X)	(X##_f[1])
+
+#else   /* not _FP_W_TYPE_SIZE < 64 */
+union _FP_UNION_E
+{
+  long double flt /* __attribute__((mode(TF))) */ ;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned long pad : (_FP_W_TYPE_SIZE - 1 - _FP_EXPBITS_E);
+    unsigned sign  : 1;
+    unsigned exp   : _FP_EXPBITS_E;
+    unsigned long frac : _FP_W_TYPE_SIZE;
+#else
+    unsigned long frac : _FP_W_TYPE_SIZE;
+    unsigned exp   : _FP_EXPBITS_E;
+    unsigned sign  : 1;
+#endif
+  } bits;
+};
+
+#define FP_DECL_E(X)		_FP_DECL(2,X)
+
+#define FP_UNPACK_RAW_E(X, val)					\
+  do {								\
+    union _FP_UNION_E _flo; _flo.flt = (val);			\
+								\
+    X##_f0 = _flo.bits.frac;					\
+    X##_f1 = 0;							\
+    X##_e = _flo.bits.exp;					\
+    X##_s = _flo.bits.sign;					\
+    if (!X##_e && X##_f0 && !(X##_f0 & _FP_IMPLBIT_E))		\
+      {								\
+        X##_e++;						\
+        FP_SET_EXCEPTION(FP_EX_DENORM);				\
+      }								\
+  } while (0)
+
+#define FP_UNPACK_RAW_EP(X, val)				\
+  do {								\
+    union _FP_UNION_E *_flo =					\
+      (union _FP_UNION_E *)(val);				\
+								\
+    X##_f0 = _flo->bits.frac;					\
+    X##_f1 = 0;							\
+    X##_e = _flo->bits.exp;					\
+    X##_s = _flo->bits.sign;					\
+    if (!X##_e && X##_f0 && !(X##_f0 & _FP_IMPLBIT_E))		\
+      {								\
+        X##_e++;						\
+        FP_SET_EXCEPTION(FP_EX_DENORM);				\
+      }								\
+  } while (0)
+
+#define FP_PACK_RAW_E(val, X)					\
+  do {								\
+    union _FP_UNION_E _flo;					\
+								\
+    if (X##_e) X##_f0 |= _FP_IMPLBIT_E;				\
+    else X##_f0 &= ~(_FP_IMPLBIT_E);				\
+    _flo.bits.frac = X##_f0;					\
+    _flo.bits.exp  = X##_e;					\
+    _flo.bits.sign = X##_s;					\
+								\
+    (val) = _flo.flt;						\
+  } while (0)
+
+#define FP_PACK_RAW_EP(fs, val, X)				\
+  do {								\
+    if (!FP_INHIBIT_RESULTS)					\
+      {								\
+	union _FP_UNION_E *_flo =				\
+	  (union _FP_UNION_E *)(val);				\
+								\
+	if (X##_e) X##_f0 |= _FP_IMPLBIT_E;			\
+	else X##_f0 &= ~(_FP_IMPLBIT_E);			\
+	_flo->bits.frac = X##_f0;				\
+	_flo->bits.exp  = X##_e;				\
+	_flo->bits.sign = X##_s;				\
+      }								\
+  } while (0)
+
+
+#define FP_UNPACK_E(X,val)		\
+  do {					\
+    FP_UNPACK_RAW_E(X,val);		\
+    _FP_UNPACK_CANONICAL(E,2,X);	\
+  } while (0)
+
+#define FP_UNPACK_EP(X,val)		\
+  do {					\
+    FP_UNPACK_RAW_EP(X,val);		\
+    _FP_UNPACK_CANONICAL(E,2,X);	\
+  } while (0)
+
+#define FP_PACK_E(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(E,2,X);		\
+    FP_PACK_RAW_E(val,X);		\
+  } while (0)
+
+#define FP_PACK_EP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(E,2,X);		\
+    FP_PACK_RAW_EP(val,X);		\
+  } while (0)
+
+#define FP_ISSIGNAN_E(X)	_FP_ISSIGNAN(E,2,X)
+#define FP_NEG_E(R,X)		_FP_NEG(E,2,R,X)
+#define FP_ADD_E(R,X,Y)		_FP_ADD(E,2,R,X,Y)
+#define FP_SUB_E(R,X,Y)		_FP_SUB(E,2,R,X,Y)
+#define FP_MUL_E(R,X,Y)		_FP_MUL(E,2,R,X,Y)
+#define FP_DIV_E(R,X,Y)		_FP_DIV(E,2,R,X,Y)
+#define FP_SQRT_E(R,X)		_FP_SQRT(E,2,R,X)
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ * We optimize it by doing most of the calculations
+ * in one UWtype registers instead of two, although we don't
+ * have to.
+ */
+#define _FP_SQRT_MEAT_E(R, S, T, X, q)			\
+  do {							\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
+    _FP_FRAC_SRL_2(X, (_FP_WORKBITS));			\
+    while (q)						\
+      {							\
+        T##_f0 = S##_f0 + q;				\
+        if (T##_f0 <= X##_f0)				\
+          {						\
+            S##_f0 = T##_f0 + q;			\
+            X##_f0 -= T##_f0;				\
+            R##_f0 += q;				\
+          }						\
+        _FP_FRAC_SLL_1(X, 1);				\
+        q >>= 1;					\
+      }							\
+    _FP_FRAC_SLL_2(R, (_FP_WORKBITS));			\
+    if (X##_f0)						\
+      {							\
+	if (S##_f0 < X##_f0)				\
+	  R##_f0 |= _FP_WORK_ROUND;			\
+	R##_f0 |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+ 
+#define FP_CMP_E(r,X,Y,un)	_FP_CMP(E,2,r,X,Y,un)
+#define FP_CMP_EQ_E(r,X,Y)	_FP_CMP_EQ(E,2,r,X,Y)
+
+#define FP_TO_INT_E(r,X,rsz,rsg)	_FP_TO_INT(E,2,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_E(r,X,rsz,rsg)	_FP_TO_INT_ROUND(E,2,r,X,rsz,rsg)
+#define FP_FROM_INT_E(X,r,rs,rt)	_FP_FROM_INT(E,2,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_E(X)	(X##_f1)
+#define _FP_FRAC_HIGH_RAW_E(X)	(X##_f0)
+
+#endif /* not _FP_W_TYPE_SIZE < 64 */
+
+#endif /* __MATH_EMU_EXTENDED_H__ */
diff --git a/include/math-emu/op-1.h b/include/math-emu/op-1.h
new file mode 100644
index 000000000000..3be3bb422cbe
--- /dev/null
+++ b/include/math-emu/op-1.h
@@ -0,0 +1,303 @@
+/* Software floating-point emulation.
+   Basic one-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_OP_1_H__
+#define    __MATH_EMU_OP_1_H__
+
+#define _FP_FRAC_DECL_1(X)	_FP_W_TYPE X##_f=0
+#define _FP_FRAC_COPY_1(D,S)	(D##_f = S##_f)
+#define _FP_FRAC_SET_1(X,I)	(X##_f = I)
+#define _FP_FRAC_HIGH_1(X)	(X##_f)
+#define _FP_FRAC_LOW_1(X)	(X##_f)
+#define _FP_FRAC_WORD_1(X,w)	(X##_f)
+
+#define _FP_FRAC_ADDI_1(X,I)	(X##_f += I)
+#define _FP_FRAC_SLL_1(X,N)			\
+  do {						\
+    if (__builtin_constant_p(N) && (N) == 1)	\
+      X##_f += X##_f;				\
+    else					\
+      X##_f <<= (N);				\
+  } while (0)
+#define _FP_FRAC_SRL_1(X,N)	(X##_f >>= N)
+
+/* Right shift with sticky-lsb.  */
+#define _FP_FRAC_SRS_1(X,N,sz)	__FP_FRAC_SRS_1(X##_f, N, sz)
+
+#define __FP_FRAC_SRS_1(X,N,sz)						\
+   (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1		\
+		     ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0)))
+
+#define _FP_FRAC_ADD_1(R,X,Y)	(R##_f = X##_f + Y##_f)
+#define _FP_FRAC_SUB_1(R,X,Y)	(R##_f = X##_f - Y##_f)
+#define _FP_FRAC_DEC_1(X,Y)	(X##_f -= Y##_f)
+#define _FP_FRAC_CLZ_1(z, X)	__FP_CLZ(z, X##_f)
+
+/* Predicates */
+#define _FP_FRAC_NEGP_1(X)	((_FP_WS_TYPE)X##_f < 0)
+#define _FP_FRAC_ZEROP_1(X)	(X##_f == 0)
+#define _FP_FRAC_OVERP_1(fs,X)	(X##_f & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_1(fs,X)	(X##_f &= ~_FP_OVERFLOW_##fs)
+#define _FP_FRAC_EQ_1(X, Y)	(X##_f == Y##_f)
+#define _FP_FRAC_GE_1(X, Y)	(X##_f >= Y##_f)
+#define _FP_FRAC_GT_1(X, Y)	(X##_f > Y##_f)
+
+#define _FP_ZEROFRAC_1		0
+#define _FP_MINFRAC_1		1
+#define _FP_MAXFRAC_1		(~(_FP_WS_TYPE)0)
+
+/*
+ * Unpack the raw bits of a native fp value.  Do not classify or
+ * normalize the data.
+ */
+
+#define _FP_UNPACK_RAW_1(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
+								\
+    X##_f = _flo.bits.frac;					\
+    X##_e = _flo.bits.exp;					\
+    X##_s = _flo.bits.sign;					\
+  } while (0)
+
+#define _FP_UNPACK_RAW_1_P(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    X##_f = _flo->bits.frac;					\
+    X##_e = _flo->bits.exp;					\
+    X##_s = _flo->bits.sign;					\
+  } while (0)
+
+/*
+ * Repack the raw bits of a native fp value.
+ */
+
+#define _FP_PACK_RAW_1(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs _flo;					\
+								\
+    _flo.bits.frac = X##_f;					\
+    _flo.bits.exp  = X##_e;					\
+    _flo.bits.sign = X##_s;					\
+								\
+    (val) = _flo.flt;						\
+  } while (0)
+
+#define _FP_PACK_RAW_1_P(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    _flo->bits.frac = X##_f;					\
+    _flo->bits.exp  = X##_e;					\
+    _flo->bits.sign = X##_s;					\
+  } while (0)
+
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
+   multiplication immediately.  */
+
+#define _FP_MUL_MEAT_1_imm(wfracbits, R, X, Y)				\
+  do {									\
+    R##_f = X##_f * Y##_f;						\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_1(R, wfracbits-1, 2*wfracbits);			\
+  } while (0)
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_1_wide(wfracbits, R, X, Y, doit)			\
+  do {									\
+    _FP_W_TYPE _Z_f0, _Z_f1;						\
+    doit(_Z_f1, _Z_f0, X##_f, Y##_f);					\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_2(_Z, wfracbits-1, 2*wfracbits);			\
+    R##_f = _Z_f0;							\
+  } while (0)
+
+/* Finally, a simple widening multiply algorithm.  What fun!  */
+
+#define _FP_MUL_MEAT_1_hard(wfracbits, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1;		\
+									\
+    /* split the words in half */					\
+    _xh = X##_f >> (_FP_W_TYPE_SIZE/2);					\
+    _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
+    _yh = Y##_f >> (_FP_W_TYPE_SIZE/2);					\
+    _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
+									\
+    /* multiply the pieces */						\
+    _z_f0 = _xl * _yl;							\
+    _a_f0 = _xh * _yl;							\
+    _a_f1 = _xl * _yh;							\
+    _z_f1 = _xh * _yh;							\
+									\
+    /* reassemble into two full words */				\
+    if ((_a_f0 += _a_f1) < _a_f1)					\
+      _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2);			\
+    _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2);				\
+    _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2);				\
+    _FP_FRAC_ADD_2(_z, _z, _a);						\
+									\
+    /* normalize */							\
+    _FP_FRAC_SRS_2(_z, wfracbits - 1, 2*wfracbits);			\
+    R##_f = _z_f0;							\
+  } while (0)
+
+
+/*
+ * Division algorithms:
+ */
+
+/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
+   division immediately.  Give this macro either _FP_DIV_HELP_imm for
+   C primitives or _FP_DIV_HELP_ldiv for the ISO function.  Which you
+   choose will depend on what the compiler does with divrem4.  */
+
+#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit)		\
+  do {							\
+    _FP_W_TYPE _q, _r;					\
+    X##_f <<= (X##_f < Y##_f				\
+	       ? R##_e--, _FP_WFRACBITS_##fs		\
+	       : _FP_WFRACBITS_##fs - 1);		\
+    doit(_q, _r, X##_f, Y##_f);				\
+    R##_f = _q | (_r != 0);				\
+  } while (0)
+
+/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd
+   that may be useful in this situation.  This first is for a primitive
+   that requires normalization, the second for one that does not.  Look
+   for UDIV_NEEDS_NORMALIZATION to tell which your machine needs.  */
+
+#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _nh, _nl, _q, _r, _y;					\
+									\
+    /* Normalize Y -- i.e. make the most significant bit set.  */	\
+    _y = Y##_f << _FP_WFRACXBITS_##fs;					\
+									\
+    /* Shift X op correspondingly high, that is, up one full word.  */	\
+    if (X##_f < Y##_f)							\
+      {									\
+	R##_e--;							\
+	_nl = 0;							\
+	_nh = X##_f;							\
+      }									\
+    else								\
+      {									\
+	_nl = X##_f << (_FP_W_TYPE_SIZE - 1);				\
+	_nh = X##_f >> 1;						\
+      }									\
+    									\
+    udiv_qrnnd(_q, _r, _nh, _nl, _y);					\
+    R##_f = _q | (_r != 0);						\
+  } while (0)
+
+#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y)		\
+  do {							\
+    _FP_W_TYPE _nh, _nl, _q, _r;			\
+    if (X##_f < Y##_f)					\
+      {							\
+	R##_e--;					\
+	_nl = X##_f << _FP_WFRACBITS_##fs;		\
+	_nh = X##_f >> _FP_WFRACXBITS_##fs;		\
+      }							\
+    else						\
+      {							\
+	_nl = X##_f << (_FP_WFRACBITS_##fs - 1);	\
+	_nh = X##_f >> (_FP_WFRACXBITS_##fs + 1);	\
+      }							\
+    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);		\
+    R##_f = _q | (_r != 0);				\
+  } while (0)
+  
+  
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_1(R, S, T, X, q)			\
+  do {							\
+    while (q != _FP_WORK_ROUND)				\
+      {							\
+        T##_f = S##_f + q;				\
+        if (T##_f <= X##_f)				\
+          {						\
+            S##_f = T##_f + q;				\
+            X##_f -= T##_f;				\
+            R##_f += q;					\
+          }						\
+        _FP_FRAC_SLL_1(X, 1);				\
+        q >>= 1;					\
+      }							\
+    if (X##_f)						\
+      {							\
+	if (S##_f < X##_f)				\
+	  R##_f |= _FP_WORK_ROUND;			\
+	R##_f |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+
+/*
+ * Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+
+#define _FP_FRAC_ASSEMBLE_1(r, X, rsize)	(r = X##_f)
+#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize)	(X##_f = r)
+
+
+/*
+ * Convert FP values between word sizes
+ */
+
+#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S)				\
+  do {									\
+    D##_f = S##_f;							\
+    if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs)			\
+      {									\
+	if (S##_c != FP_CLS_NAN)					\
+	  _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs),	\
+			 _FP_WFRACBITS_##sfs);				\
+	else								\
+	  _FP_FRAC_SRL_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs));	\
+      }									\
+    else								\
+      D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs;		\
+  } while (0)
+
+#endif /* __MATH_EMU_OP_1_H__ */
diff --git a/include/math-emu/op-2.h b/include/math-emu/op-2.h
new file mode 100644
index 000000000000..e193fb08fd55
--- /dev/null
+++ b/include/math-emu/op-2.h
@@ -0,0 +1,613 @@
+/* Software floating-point emulation.
+   Basic two-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_2_H__
+#define __MATH_EMU_OP_2_H__
+
+#define _FP_FRAC_DECL_2(X)	_FP_W_TYPE X##_f0, X##_f1
+#define _FP_FRAC_COPY_2(D,S)	(D##_f0 = S##_f0, D##_f1 = S##_f1)
+#define _FP_FRAC_SET_2(X,I)	__FP_FRAC_SET_2(X, I)
+#define _FP_FRAC_HIGH_2(X)	(X##_f1)
+#define _FP_FRAC_LOW_2(X)	(X##_f0)
+#define _FP_FRAC_WORD_2(X,w)	(X##_f##w)
+
+#define _FP_FRAC_SLL_2(X,N)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	if (__builtin_constant_p(N) && (N) == 1) 			\
+	  {								\
+	    X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0);	\
+	    X##_f0 += X##_f0;						\
+	  }								\
+	else								\
+	  {								\
+	    X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N));	\
+	    X##_f0 <<= (N);						\
+	  }								\
+      }									\
+    else								\
+      {									\
+	X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE);			\
+	X##_f0 = 0;							\
+      }									\
+  } while (0)
+
+#define _FP_FRAC_SRL_2(X,N)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N));	\
+	X##_f1 >>= (N);							\
+      }									\
+    else								\
+      {									\
+	X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE);			\
+	X##_f1 = 0;							\
+      }									\
+  } while (0)
+
+/* Right shift with sticky-lsb.  */
+#define _FP_FRAC_SRS_2(X,N,sz)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) |	\
+		  (__builtin_constant_p(N) && (N) == 1			\
+		   ? X##_f0 & 1						\
+		   : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0));	\
+	X##_f1 >>= (N);							\
+      }									\
+    else								\
+      {									\
+	X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) |			\
+		(((X##_f1 << (2*_FP_W_TYPE_SIZE - (N))) | X##_f0) != 0)); \
+	X##_f1 = 0;							\
+      }									\
+  } while (0)
+
+#define _FP_FRAC_ADDI_2(X,I)	\
+  __FP_FRAC_ADDI_2(X##_f1, X##_f0, I)
+
+#define _FP_FRAC_ADD_2(R,X,Y)	\
+  __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_SUB_2(R,X,Y)	\
+  __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_DEC_2(X,Y)	\
+  __FP_FRAC_DEC_2(X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_CLZ_2(R,X)	\
+  do {				\
+    if (X##_f1)			\
+      __FP_CLZ(R,X##_f1);	\
+    else 			\
+    {				\
+      __FP_CLZ(R,X##_f0);	\
+      R += _FP_W_TYPE_SIZE;	\
+    }				\
+  } while(0)
+
+/* Predicates */
+#define _FP_FRAC_NEGP_2(X)	((_FP_WS_TYPE)X##_f1 < 0)
+#define _FP_FRAC_ZEROP_2(X)	((X##_f1 | X##_f0) == 0)
+#define _FP_FRAC_OVERP_2(fs,X)	(_FP_FRAC_HIGH_##fs(X) & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_2(fs,X)	(_FP_FRAC_HIGH_##fs(X) &= ~_FP_OVERFLOW_##fs)
+#define _FP_FRAC_EQ_2(X, Y)	(X##_f1 == Y##_f1 && X##_f0 == Y##_f0)
+#define _FP_FRAC_GT_2(X, Y)	\
+  (X##_f1 > Y##_f1 || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0))
+#define _FP_FRAC_GE_2(X, Y)	\
+  (X##_f1 > Y##_f1 || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0))
+
+#define _FP_ZEROFRAC_2		0, 0
+#define _FP_MINFRAC_2		0, 1
+#define _FP_MAXFRAC_2		(~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0)
+
+/*
+ * Internals 
+ */
+
+#define __FP_FRAC_SET_2(X,I1,I0)	(X##_f0 = I0, X##_f1 = I1)
+
+#define __FP_CLZ_2(R, xh, xl)	\
+  do {				\
+    if (xh)			\
+      __FP_CLZ(R,xh);		\
+    else 			\
+    {				\
+      __FP_CLZ(R,xl);		\
+      R += _FP_W_TYPE_SIZE;	\
+    }				\
+  } while(0)
+
+#if 0
+
+#ifndef __FP_FRAC_ADDI_2
+#define __FP_FRAC_ADDI_2(xh, xl, i)	\
+  (xh += ((xl += i) < i))
+#endif
+#ifndef __FP_FRAC_ADD_2
+#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl)	\
+  (rh = xh + yh + ((rl = xl + yl) < xl))
+#endif
+#ifndef __FP_FRAC_SUB_2
+#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl)	\
+  (rh = xh - yh - ((rl = xl - yl) > xl))
+#endif
+#ifndef __FP_FRAC_DEC_2
+#define __FP_FRAC_DEC_2(xh, xl, yh, yl)	\
+  do {					\
+    UWtype _t = xl;			\
+    xh -= yh + ((xl -= yl) > _t);	\
+  } while (0)
+#endif
+
+#else
+
+#undef __FP_FRAC_ADDI_2
+#define __FP_FRAC_ADDI_2(xh, xl, i)	add_ssaaaa(xh, xl, xh, xl, 0, i)
+#undef __FP_FRAC_ADD_2
+#define __FP_FRAC_ADD_2			add_ssaaaa
+#undef __FP_FRAC_SUB_2
+#define __FP_FRAC_SUB_2			sub_ddmmss
+#undef __FP_FRAC_DEC_2
+#define __FP_FRAC_DEC_2(xh, xl, yh, yl)	sub_ddmmss(xh, xl, xh, xl, yh, yl)
+
+#endif
+
+/*
+ * Unpack the raw bits of a native fp value.  Do not classify or
+ * normalize the data.
+ */
+
+#define _FP_UNPACK_RAW_2(fs, X, val)			\
+  do {							\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);	\
+							\
+    X##_f0 = _flo.bits.frac0;				\
+    X##_f1 = _flo.bits.frac1;				\
+    X##_e  = _flo.bits.exp;				\
+    X##_s  = _flo.bits.sign;				\
+  } while (0)
+
+#define _FP_UNPACK_RAW_2_P(fs, X, val)			\
+  do {							\
+    union _FP_UNION_##fs *_flo =			\
+      (union _FP_UNION_##fs *)(val);			\
+							\
+    X##_f0 = _flo->bits.frac0;				\
+    X##_f1 = _flo->bits.frac1;				\
+    X##_e  = _flo->bits.exp;				\
+    X##_s  = _flo->bits.sign;				\
+  } while (0)
+
+
+/*
+ * Repack the raw bits of a native fp value.
+ */
+
+#define _FP_PACK_RAW_2(fs, val, X)			\
+  do {							\
+    union _FP_UNION_##fs _flo;				\
+							\
+    _flo.bits.frac0 = X##_f0;				\
+    _flo.bits.frac1 = X##_f1;				\
+    _flo.bits.exp   = X##_e;				\
+    _flo.bits.sign  = X##_s;				\
+							\
+    (val) = _flo.flt;					\
+  } while (0)
+
+#define _FP_PACK_RAW_2_P(fs, val, X)			\
+  do {							\
+    union _FP_UNION_##fs *_flo =			\
+      (union _FP_UNION_##fs *)(val);			\
+							\
+    _flo->bits.frac0 = X##_f0;				\
+    _flo->bits.frac1 = X##_f1;				\
+    _flo->bits.exp   = X##_e;				\
+    _flo->bits.sign  = X##_s;				\
+  } while (0)
+
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_2_wide(wfracbits, R, X, Y, doit)			\
+  do {									\
+    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
+									\
+    doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0);	\
+    doit(_b_f1, _b_f0, X##_f0, Y##_f1);					\
+    doit(_c_f1, _c_f0, X##_f1, Y##_f0);					\
+    doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1);	\
+									\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _b_f1, _b_f0,		\
+		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1));				\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _c_f1, _c_f0,		\
+		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1));				\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
+    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
+  } while (0)
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.
+   Do only 3 multiplications instead of four. This one is for machines
+   where multiplication is much more expensive than subtraction.  */
+
+#define _FP_MUL_MEAT_2_wide_3mul(wfracbits, R, X, Y, doit)		\
+  do {									\
+    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
+    _FP_W_TYPE _d;							\
+    int _c1, _c2;							\
+									\
+    _b_f0 = X##_f0 + X##_f1;						\
+    _c1 = _b_f0 < X##_f0;						\
+    _b_f1 = Y##_f0 + Y##_f1;						\
+    _c2 = _b_f1 < Y##_f0;						\
+    doit(_d, _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0);			\
+    doit(_FP_FRAC_WORD_4(_z,2), _FP_FRAC_WORD_4(_z,1), _b_f0, _b_f1);	\
+    doit(_c_f1, _c_f0, X##_f1, Y##_f1);					\
+									\
+    _b_f0 &= -_c2;							\
+    _b_f1 &= -_c1;							\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), (_c1 & _c2), 0, _d,		\
+		    0, _FP_FRAC_WORD_4(_z,2), _FP_FRAC_WORD_4(_z,1));	\
+    __FP_FRAC_ADDI_2(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		     _b_f0);						\
+    __FP_FRAC_ADDI_2(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		     _b_f1);						\
+    __FP_FRAC_DEC_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1),				\
+		    0, _d, _FP_FRAC_WORD_4(_z,0));			\
+    __FP_FRAC_DEC_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _c_f1, _c_f0);		\
+    __FP_FRAC_ADD_2(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2),	\
+		    _c_f1, _c_f0,					\
+		    _FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2));	\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
+    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
+  } while (0)
+
+#define _FP_MUL_MEAT_2_gmp(wfracbits, R, X, Y)				\
+  do {									\
+    _FP_FRAC_DECL_4(_z);						\
+    _FP_W_TYPE _x[2], _y[2];						\
+    _x[0] = X##_f0; _x[1] = X##_f1;					\
+    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
+									\
+    mpn_mul_n(_z_f, _x, _y, 2);						\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _z_f[0];							\
+    R##_f1 = _z_f[1];							\
+  } while (0)
+
+/* Do at most 120x120=240 bits multiplication using double floating
+   point multiplication.  This is useful if floating point
+   multiplication has much bigger throughput than integer multiply.
+   It is supposed to work for _FP_W_TYPE_SIZE 64 and wfracbits
+   between 106 and 120 only.  
+   Caller guarantees that X and Y has (1LLL << (wfracbits - 1)) set.
+   SETFETZ is a macro which will disable all FPU exceptions and set rounding
+   towards zero,  RESETFE should optionally reset it back.  */
+
+#define _FP_MUL_MEAT_2_120_240_double(wfracbits, R, X, Y, setfetz, resetfe)	\
+  do {										\
+    static const double _const[] = {						\
+      /* 2^-24 */ 5.9604644775390625e-08,					\
+      /* 2^-48 */ 3.5527136788005009e-15,					\
+      /* 2^-72 */ 2.1175823681357508e-22,					\
+      /* 2^-96 */ 1.2621774483536189e-29,					\
+      /* 2^28 */ 2.68435456e+08,						\
+      /* 2^4 */ 1.600000e+01,							\
+      /* 2^-20 */ 9.5367431640625e-07,						\
+      /* 2^-44 */ 5.6843418860808015e-14,					\
+      /* 2^-68 */ 3.3881317890172014e-21,					\
+      /* 2^-92 */ 2.0194839173657902e-28,					\
+      /* 2^-116 */ 1.2037062152420224e-35};					\
+    double _a240, _b240, _c240, _d240, _e240, _f240, 				\
+	   _g240, _h240, _i240, _j240, _k240;					\
+    union { double d; UDItype i; } _l240, _m240, _n240, _o240,			\
+				   _p240, _q240, _r240, _s240;			\
+    UDItype _t240, _u240, _v240, _w240, _x240, _y240 = 0;			\
+										\
+    if (wfracbits < 106 || wfracbits > 120)					\
+      abort();									\
+										\
+    setfetz;									\
+										\
+    _e240 = (double)(long)(X##_f0 & 0xffffff);					\
+    _j240 = (double)(long)(Y##_f0 & 0xffffff);					\
+    _d240 = (double)(long)((X##_f0 >> 24) & 0xffffff);				\
+    _i240 = (double)(long)((Y##_f0 >> 24) & 0xffffff);				\
+    _c240 = (double)(long)(((X##_f1 << 16) & 0xffffff) | (X##_f0 >> 48));	\
+    _h240 = (double)(long)(((Y##_f1 << 16) & 0xffffff) | (Y##_f0 >> 48));	\
+    _b240 = (double)(long)((X##_f1 >> 8) & 0xffffff);				\
+    _g240 = (double)(long)((Y##_f1 >> 8) & 0xffffff);				\
+    _a240 = (double)(long)(X##_f1 >> 32);					\
+    _f240 = (double)(long)(Y##_f1 >> 32);					\
+    _e240 *= _const[3];								\
+    _j240 *= _const[3];								\
+    _d240 *= _const[2];								\
+    _i240 *= _const[2];								\
+    _c240 *= _const[1];								\
+    _h240 *= _const[1];								\
+    _b240 *= _const[0];								\
+    _g240 *= _const[0];								\
+    _s240.d =							      _e240*_j240;\
+    _r240.d =						_d240*_j240 + _e240*_i240;\
+    _q240.d =				  _c240*_j240 + _d240*_i240 + _e240*_h240;\
+    _p240.d =		    _b240*_j240 + _c240*_i240 + _d240*_h240 + _e240*_g240;\
+    _o240.d = _a240*_j240 + _b240*_i240 + _c240*_h240 + _d240*_g240 + _e240*_f240;\
+    _n240.d = _a240*_i240 + _b240*_h240 + _c240*_g240 + _d240*_f240;		\
+    _m240.d = _a240*_h240 + _b240*_g240 + _c240*_f240;				\
+    _l240.d = _a240*_g240 + _b240*_f240;					\
+    _k240 =   _a240*_f240;							\
+    _r240.d += _s240.d;								\
+    _q240.d += _r240.d;								\
+    _p240.d += _q240.d;								\
+    _o240.d += _p240.d;								\
+    _n240.d += _o240.d;								\
+    _m240.d += _n240.d;								\
+    _l240.d += _m240.d;								\
+    _k240 += _l240.d;								\
+    _s240.d -= ((_const[10]+_s240.d)-_const[10]);				\
+    _r240.d -= ((_const[9]+_r240.d)-_const[9]);					\
+    _q240.d -= ((_const[8]+_q240.d)-_const[8]);					\
+    _p240.d -= ((_const[7]+_p240.d)-_const[7]);					\
+    _o240.d += _const[7];							\
+    _n240.d += _const[6];							\
+    _m240.d += _const[5];							\
+    _l240.d += _const[4];							\
+    if (_s240.d != 0.0) _y240 = 1;						\
+    if (_r240.d != 0.0) _y240 = 1;						\
+    if (_q240.d != 0.0) _y240 = 1;						\
+    if (_p240.d != 0.0) _y240 = 1;						\
+    _t240 = (DItype)_k240;							\
+    _u240 = _l240.i;								\
+    _v240 = _m240.i;								\
+    _w240 = _n240.i;								\
+    _x240 = _o240.i;								\
+    R##_f1 = (_t240 << (128 - (wfracbits - 1)))					\
+	     | ((_u240 & 0xffffff) >> ((wfracbits - 1) - 104));			\
+    R##_f0 = ((_u240 & 0xffffff) << (168 - (wfracbits - 1)))			\
+    	     | ((_v240 & 0xffffff) << (144 - (wfracbits - 1)))			\
+    	     | ((_w240 & 0xffffff) << (120 - (wfracbits - 1)))			\
+    	     | ((_x240 & 0xffffff) >> ((wfracbits - 1) - 96))			\
+    	     | _y240;								\
+    resetfe;									\
+  } while (0)
+
+/*
+ * Division algorithms:
+ */
+
+#define _FP_DIV_MEAT_2_udiv(fs, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _n_f2, _n_f1, _n_f0, _r_f1, _r_f0, _m_f1, _m_f0;		\
+    if (_FP_FRAC_GT_2(X, Y))						\
+      {									\
+	_n_f2 = X##_f1 >> 1;						\
+	_n_f1 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1;		\
+	_n_f0 = X##_f0 << (_FP_W_TYPE_SIZE - 1);			\
+      }									\
+    else								\
+      {									\
+	R##_e--;							\
+	_n_f2 = X##_f1;							\
+	_n_f1 = X##_f0;							\
+	_n_f0 = 0;							\
+      }									\
+									\
+    /* Normalize, i.e. make the most significant bit of the 		\
+       denominator set. */						\
+    _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs);				\
+									\
+    udiv_qrnnd(R##_f1, _r_f1, _n_f2, _n_f1, Y##_f1);			\
+    umul_ppmm(_m_f1, _m_f0, R##_f1, Y##_f0);				\
+    _r_f0 = _n_f0;							\
+    if (_FP_FRAC_GT_2(_m, _r))						\
+      {									\
+	R##_f1--;							\
+	_FP_FRAC_ADD_2(_r, Y, _r);					\
+	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
+	  {								\
+	    R##_f1--;							\
+	    _FP_FRAC_ADD_2(_r, Y, _r);					\
+	  }								\
+      }									\
+    _FP_FRAC_DEC_2(_r, _m);						\
+									\
+    if (_r_f1 == Y##_f1)						\
+      {									\
+	/* This is a special case, not an optimization			\
+	   (_r/Y##_f1 would not fit into UWtype).			\
+	   As _r is guaranteed to be < Y,  R##_f0 can be either		\
+	   (UWtype)-1 or (UWtype)-2.  But as we know what kind		\
+	   of bits it is (sticky, guard, round),  we don't care.	\
+	   We also don't care what the reminder is,  because the	\
+	   guard bit will be set anyway.  -jj */			\
+	R##_f0 = -1;							\
+      }									\
+    else								\
+      {									\
+	udiv_qrnnd(R##_f0, _r_f1, _r_f1, _r_f0, Y##_f1);		\
+	umul_ppmm(_m_f1, _m_f0, R##_f0, Y##_f0);			\
+	_r_f0 = 0;							\
+	if (_FP_FRAC_GT_2(_m, _r))					\
+	  {								\
+	    R##_f0--;							\
+	    _FP_FRAC_ADD_2(_r, Y, _r);					\
+	    if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
+	      {								\
+		R##_f0--;						\
+		_FP_FRAC_ADD_2(_r, Y, _r);				\
+	      }								\
+	  }								\
+	if (!_FP_FRAC_EQ_2(_r, _m))					\
+	  R##_f0 |= _FP_WORK_STICKY;					\
+      }									\
+  } while (0)
+
+
+#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y)					\
+  do {									\
+    _FP_W_TYPE _x[4], _y[2], _z[4];					\
+    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
+    _x[0] = _x[3] = 0;							\
+    if (_FP_FRAC_GT_2(X, Y))						\
+      {									\
+	R##_e++;							\
+	_x[1] = (X##_f0 << (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE) |	\
+		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
+			    (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE)));	\
+	_x[2] = X##_f1 << (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE);	\
+      }									\
+    else								\
+      {									\
+	_x[1] = (X##_f0 << (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE) |	\
+		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
+			    (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE)));	\
+	_x[2] = X##_f1 << (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE);	\
+      }									\
+									\
+    (void) mpn_divrem (_z, 0, _x, 4, _y, 2);				\
+    R##_f1 = _z[1];							\
+    R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0);				\
+  } while (0)
+
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_2(R, S, T, X, q)			\
+  do {							\
+    while (q)						\
+      {							\
+	T##_f1 = S##_f1 + q;				\
+	if (T##_f1 <= X##_f1)				\
+	  {						\
+	    S##_f1 = T##_f1 + q;			\
+	    X##_f1 -= T##_f1;				\
+	    R##_f1 += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
+    while (q != _FP_WORK_ROUND)				\
+      {							\
+	T##_f0 = S##_f0 + q;				\
+	T##_f1 = S##_f1;				\
+	if (T##_f1 < X##_f1 || 				\
+	    (T##_f1 == X##_f1 && T##_f0 <= X##_f0))	\
+	  {						\
+	    S##_f0 = T##_f0 + q;			\
+	    S##_f1 += (T##_f0 > S##_f0);		\
+	    _FP_FRAC_DEC_2(X, T);			\
+	    R##_f0 += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    if (X##_f0 | X##_f1)				\
+      {							\
+	if (S##_f1 < X##_f1 || 				\
+	    (S##_f1 == X##_f1 && S##_f0 < X##_f0))	\
+	  R##_f0 |= _FP_WORK_ROUND;			\
+	R##_f0 |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+
+
+/*
+ * Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+
+#define _FP_FRAC_ASSEMBLE_2(r, X, rsize)	\
+  do {						\
+    if (rsize <= _FP_W_TYPE_SIZE)		\
+      r = X##_f0;				\
+    else					\
+      {						\
+	r = X##_f1;				\
+	r <<= _FP_W_TYPE_SIZE;			\
+	r += X##_f0;				\
+      }						\
+  } while (0)
+
+#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize)				\
+  do {									\
+    X##_f0 = r;								\
+    X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
+  } while (0)
+
+/*
+ * Convert FP values between word sizes
+ */
+
+#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S)				\
+  do {									\
+    if (S##_c != FP_CLS_NAN)						\
+      _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+		     _FP_WFRACBITS_##sfs);				\
+    else								\
+      _FP_FRAC_SRL_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+    D##_f = S##_f0;							\
+  } while (0)
+
+#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S)				\
+  do {									\
+    D##_f0 = S##_f;							\
+    D##_f1 = 0;								\
+    _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+  } while (0)
+
+#endif
diff --git a/include/math-emu/op-4.h b/include/math-emu/op-4.h
new file mode 100644
index 000000000000..ba226f8237a6
--- /dev/null
+++ b/include/math-emu/op-4.h
@@ -0,0 +1,692 @@
+/* Software floating-point emulation.
+   Basic four-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_4_H__
+#define __MATH_EMU_OP_4_H__
+
+#define _FP_FRAC_DECL_4(X)	_FP_W_TYPE X##_f[4]
+#define _FP_FRAC_COPY_4(D,S)			\
+  (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1],	\
+   D##_f[2] = S##_f[2], D##_f[3] = S##_f[3])
+#define _FP_FRAC_SET_4(X,I)	__FP_FRAC_SET_4(X, I)
+#define _FP_FRAC_HIGH_4(X)	(X##_f[3])
+#define _FP_FRAC_LOW_4(X)	(X##_f[0])
+#define _FP_FRAC_WORD_4(X,w)	(X##_f[w])
+
+#define _FP_FRAC_SLL_4(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _up = (N) % _FP_W_TYPE_SIZE;					\
+    _down = _FP_W_TYPE_SIZE - _up;					\
+    if (!_up)								\
+      for (_i = 3; _i >= _skip; --_i)					\
+	X##_f[_i] = X##_f[_i-_skip];					\
+    else								\
+      {									\
+	for (_i = 3; _i > _skip; --_i)					\
+	  X##_f[_i] = X##_f[_i-_skip] << _up				\
+		      | X##_f[_i-_skip-1] >> _down;			\
+	X##_f[_i--] = X##_f[0] << _up; 					\
+      }									\
+    for (; _i >= 0; --_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+/* This one was broken too */
+#define _FP_FRAC_SRL_4(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    if (!_down)								\
+      for (_i = 0; _i <= 3-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 3-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[3] >> _down;				\
+      }									\
+    for (; _i < 4; ++_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+
+/* Right shift with sticky-lsb. 
+ * What this actually means is that we do a standard right-shift,
+ * but that if any of the bits that fall off the right hand side
+ * were one then we always set the LSbit.
+ */
+#define _FP_FRAC_SRS_4(X,N,size)					\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _FP_W_TYPE _s;							\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    for (_s = _i = 0; _i < _skip; ++_i)					\
+      _s |= X##_f[_i];							\
+    _s |= X##_f[_i] << _up;						\
+/* s is now != 0 if we want to set the LSbit */				\
+    if (!_down)								\
+      for (_i = 0; _i <= 3-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 3-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[3] >> _down;				\
+      }									\
+    for (; _i < 4; ++_i)						\
+      X##_f[_i] = 0;							\
+    /* don't fix the LSB until the very end when we're sure f[0] is stable */	\
+    X##_f[0] |= (_s != 0);						\
+  } while (0)
+
+#define _FP_FRAC_ADD_4(R,X,Y)						\
+  __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
+		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_SUB_4(R,X,Y)						\
+  __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
+		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_DEC_4(X,Y)						\
+  __FP_FRAC_DEC_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_ADDI_4(X,I)						\
+  __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I)
+
+#define _FP_ZEROFRAC_4  0,0,0,0
+#define _FP_MINFRAC_4   0,0,0,1
+#define _FP_MAXFRAC_4	(~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0)
+
+#define _FP_FRAC_ZEROP_4(X)     ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0)
+#define _FP_FRAC_NEGP_4(X)      ((_FP_WS_TYPE)X##_f[3] < 0)
+#define _FP_FRAC_OVERP_4(fs,X)  (_FP_FRAC_HIGH_##fs(X) & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_4(fs,X)  (_FP_FRAC_HIGH_##fs(X) &= ~_FP_OVERFLOW_##fs)
+
+#define _FP_FRAC_EQ_4(X,Y)				\
+ (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1]		\
+  && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3])
+
+#define _FP_FRAC_GT_4(X,Y)				\
+ (X##_f[3] > Y##_f[3] ||				\
+  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||	\
+   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||	\
+    (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0])	\
+   ))							\
+  ))							\
+ )
+
+#define _FP_FRAC_GE_4(X,Y)				\
+ (X##_f[3] > Y##_f[3] ||				\
+  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||	\
+   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||	\
+    (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0])	\
+   ))							\
+  ))							\
+ )
+
+
+#define _FP_FRAC_CLZ_4(R,X)		\
+  do {					\
+    if (X##_f[3])			\
+    {					\
+	__FP_CLZ(R,X##_f[3]);		\
+    }					\
+    else if (X##_f[2])			\
+    {					\
+	__FP_CLZ(R,X##_f[2]);		\
+	R += _FP_W_TYPE_SIZE;		\
+    }					\
+    else if (X##_f[1])			\
+    {					\
+	__FP_CLZ(R,X##_f[2]);		\
+	R += _FP_W_TYPE_SIZE*2;		\
+    }					\
+    else				\
+    {					\
+	__FP_CLZ(R,X##_f[0]);		\
+	R += _FP_W_TYPE_SIZE*3;		\
+    }					\
+  } while(0)
+
+
+#define _FP_UNPACK_RAW_4(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
+    X##_f[0] = _flo.bits.frac0;					\
+    X##_f[1] = _flo.bits.frac1;					\
+    X##_f[2] = _flo.bits.frac2;					\
+    X##_f[3] = _flo.bits.frac3;					\
+    X##_e  = _flo.bits.exp;					\
+    X##_s  = _flo.bits.sign;					\
+  } while (0)
+
+#define _FP_UNPACK_RAW_4_P(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    X##_f[0] = _flo->bits.frac0;				\
+    X##_f[1] = _flo->bits.frac1;				\
+    X##_f[2] = _flo->bits.frac2;				\
+    X##_f[3] = _flo->bits.frac3;				\
+    X##_e  = _flo->bits.exp;					\
+    X##_s  = _flo->bits.sign;					\
+  } while (0)
+
+#define _FP_PACK_RAW_4(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs _flo;					\
+    _flo.bits.frac0 = X##_f[0];					\
+    _flo.bits.frac1 = X##_f[1];					\
+    _flo.bits.frac2 = X##_f[2];					\
+    _flo.bits.frac3 = X##_f[3];					\
+    _flo.bits.exp   = X##_e;					\
+    _flo.bits.sign  = X##_s;					\
+    (val) = _flo.flt;				   		\
+  } while (0)
+
+#define _FP_PACK_RAW_4_P(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    _flo->bits.frac0 = X##_f[0];				\
+    _flo->bits.frac1 = X##_f[1];				\
+    _flo->bits.frac2 = X##_f[2];				\
+    _flo->bits.frac3 = X##_f[3];				\
+    _flo->bits.exp   = X##_e;					\
+    _flo->bits.sign  = X##_s;					\
+  } while (0)
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_4_wide(wfracbits, R, X, Y, doit)			    \
+  do {									    \
+    _FP_FRAC_DECL_8(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	    \
+    _FP_FRAC_DECL_2(_d); _FP_FRAC_DECL_2(_e); _FP_FRAC_DECL_2(_f);	    \
+									    \
+    doit(_FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0), X##_f[0], Y##_f[0]); \
+    doit(_b_f1, _b_f0, X##_f[0], Y##_f[1]);				    \
+    doit(_c_f1, _c_f0, X##_f[1], Y##_f[0]);				    \
+    doit(_d_f1, _d_f0, X##_f[1], Y##_f[1]);				    \
+    doit(_e_f1, _e_f0, X##_f[0], Y##_f[2]);				    \
+    doit(_f_f1, _f_f0, X##_f[2], Y##_f[0]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), 0,_b_f1,_b_f0,		    \
+		    0,0,_FP_FRAC_WORD_8(_z,1));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_d_f1,_d_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_e_f1,_e_f0,		    \
+		    _FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_f_f1,_f_f0,		    \
+		    _FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2));				    \
+    doit(_b_f1, _b_f0, X##_f[0], Y##_f[3]);				    \
+    doit(_c_f1, _c_f0, X##_f[3], Y##_f[0]);				    \
+    doit(_d_f1, _d_f0, X##_f[1], Y##_f[2]);				    \
+    doit(_e_f1, _e_f0, X##_f[2], Y##_f[1]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_b_f1,_b_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_d_f1,_d_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_e_f1,_e_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    doit(_b_f1, _b_f0, X##_f[2], Y##_f[2]);				    \
+    doit(_c_f1, _c_f0, X##_f[1], Y##_f[3]);				    \
+    doit(_d_f1, _d_f0, X##_f[3], Y##_f[1]);				    \
+    doit(_e_f1, _e_f0, X##_f[2], Y##_f[3]);				    \
+    doit(_f_f1, _f_f0, X##_f[3], Y##_f[2]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_b_f1,_b_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_d_f1,_d_f0,		    \
+		    _FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5), 0,_e_f1,_e_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5), 0,_f_f1,_f_f0,		    \
+		    _FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5));				    \
+    doit(_b_f1, _b_f0, X##_f[3], Y##_f[3]);				    \
+    __FP_FRAC_ADD_2(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _b_f1,_b_f0,					    \
+		    _FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6));	    \
+									    \
+    /* Normalize since we know where the msb of the multiplicands	    \
+       were (bit B), we know that the msb of the of the product is	    \
+       at either 2B or 2B-1.  */					    \
+    _FP_FRAC_SRS_8(_z, wfracbits-1, 2*wfracbits);			    \
+    __FP_FRAC_SET_4(R, _FP_FRAC_WORD_8(_z,3), _FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0));	    \
+  } while (0)
+
+#define _FP_MUL_MEAT_4_gmp(wfracbits, R, X, Y)				    \
+  do {									    \
+    _FP_FRAC_DECL_8(_z);						    \
+									    \
+    mpn_mul_n(_z_f, _x_f, _y_f, 4);					    \
+									    \
+    /* Normalize since we know where the msb of the multiplicands	    \
+       were (bit B), we know that the msb of the of the product is	    \
+       at either 2B or 2B-1.  */					    \
+    _FP_FRAC_SRS_8(_z, wfracbits-1, 2*wfracbits);	 		    \
+    __FP_FRAC_SET_4(R, _FP_FRAC_WORD_8(_z,3), _FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0));	    \
+  } while (0)
+
+/*
+ * Helper utility for _FP_DIV_MEAT_4_udiv:
+ * pppp = m * nnn
+ */
+#define umul_ppppmnnn(p3,p2,p1,p0,m,n2,n1,n0)				    \
+  do {									    \
+    UWtype _t;								    \
+    umul_ppmm(p1,p0,m,n0);						    \
+    umul_ppmm(p2,_t,m,n1);						    \
+    __FP_FRAC_ADDI_2(p2,p1,_t);						    \
+    umul_ppmm(p3,_t,m,n2);						    \
+    __FP_FRAC_ADDI_2(p3,p2,_t);						    \
+  } while (0)
+
+/*
+ * Division algorithms:
+ */
+
+#define _FP_DIV_MEAT_4_udiv(fs, R, X, Y)				    \
+  do {									    \
+    int _i;								    \
+    _FP_FRAC_DECL_4(_n); _FP_FRAC_DECL_4(_m);				    \
+    _FP_FRAC_SET_4(_n, _FP_ZEROFRAC_4);					    \
+    if (_FP_FRAC_GT_4(X, Y))						    \
+      {									    \
+	_n_f[3] = X##_f[0] << (_FP_W_TYPE_SIZE - 1);			    \
+	_FP_FRAC_SRL_4(X, 1);						    \
+      }									    \
+    else								    \
+      R##_e--;								    \
+									    \
+    /* Normalize, i.e. make the most significant bit of the 		    \
+       denominator set. */						    \
+    _FP_FRAC_SLL_4(Y, _FP_WFRACXBITS_##fs);				    \
+									    \
+    for (_i = 3; ; _i--)						    \
+      {									    \
+        if (X##_f[3] == Y##_f[3])					    \
+          {								    \
+            /* This is a special case, not an optimization		    \
+               (X##_f[3]/Y##_f[3] would not fit into UWtype).		    \
+               As X## is guaranteed to be < Y,  R##_f[_i] can be either	    \
+               (UWtype)-1 or (UWtype)-2.  */				    \
+            R##_f[_i] = -1;						    \
+            if (!_i)							    \
+	      break;							    \
+            __FP_FRAC_SUB_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0],	    \
+			    Y##_f[2], Y##_f[1], Y##_f[0], 0,		    \
+			    X##_f[2], X##_f[1], X##_f[0], _n_f[_i]);	    \
+            _FP_FRAC_SUB_4(X, Y, X);					    \
+            if (X##_f[3] > Y##_f[3])					    \
+              {								    \
+                R##_f[_i] = -2;						    \
+                _FP_FRAC_ADD_4(X, Y, X);				    \
+              }								    \
+          }								    \
+        else								    \
+          {								    \
+            udiv_qrnnd(R##_f[_i], X##_f[3], X##_f[3], X##_f[2], Y##_f[3]);  \
+            umul_ppppmnnn(_m_f[3], _m_f[2], _m_f[1], _m_f[0],		    \
+			  R##_f[_i], Y##_f[2], Y##_f[1], Y##_f[0]);	    \
+            X##_f[2] = X##_f[1];					    \
+            X##_f[1] = X##_f[0];					    \
+            X##_f[0] = _n_f[_i];					    \
+            if (_FP_FRAC_GT_4(_m, X))					    \
+              {								    \
+                R##_f[_i]--;						    \
+                _FP_FRAC_ADD_4(X, Y, X);				    \
+                if (_FP_FRAC_GE_4(X, Y) && _FP_FRAC_GT_4(_m, X))	    \
+                  {							    \
+		    R##_f[_i]--;					    \
+		    _FP_FRAC_ADD_4(X, Y, X);				    \
+                  }							    \
+              }								    \
+            _FP_FRAC_DEC_4(X, _m);					    \
+            if (!_i)							    \
+	      {								    \
+		if (!_FP_FRAC_EQ_4(X, _m))				    \
+		  R##_f[0] |= _FP_WORK_STICKY;				    \
+		break;							    \
+	      }								    \
+          }								    \
+      }									    \
+  } while (0)
+
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_4(R, S, T, X, q)				\
+  do {								\
+    while (q)							\
+      {								\
+	T##_f[3] = S##_f[3] + q;				\
+	if (T##_f[3] <= X##_f[3])				\
+	  {							\
+	    S##_f[3] = T##_f[3] + q;				\
+	    X##_f[3] -= T##_f[3];				\
+	    R##_f[3] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q)							\
+      {								\
+	T##_f[2] = S##_f[2] + q;				\
+	T##_f[3] = S##_f[3];					\
+	if (T##_f[3] < X##_f[3] || 				\
+	    (T##_f[3] == X##_f[3] && T##_f[2] <= X##_f[2]))	\
+	  {							\
+	    S##_f[2] = T##_f[2] + q;				\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    __FP_FRAC_DEC_2(X##_f[3], X##_f[2],			\
+			    T##_f[3], T##_f[2]);		\
+	    R##_f[2] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q)							\
+      {								\
+	T##_f[1] = S##_f[1] + q;				\
+	T##_f[2] = S##_f[2];					\
+	T##_f[3] = S##_f[3];					\
+	if (T##_f[3] < X##_f[3] || 				\
+	    (T##_f[3] == X##_f[3] && (T##_f[2] < X##_f[2] ||	\
+	     (T##_f[2] == X##_f[2] && T##_f[1] <= X##_f[1]))))	\
+	  {							\
+	    S##_f[1] = T##_f[1] + q;				\
+	    S##_f[2] += (T##_f[1] > S##_f[1]);			\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    __FP_FRAC_DEC_3(X##_f[3], X##_f[2], X##_f[1],	\
+	    		    T##_f[3], T##_f[2], T##_f[1]);	\
+	    R##_f[1] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q != _FP_WORK_ROUND)					\
+      {								\
+	T##_f[0] = S##_f[0] + q;				\
+	T##_f[1] = S##_f[1];					\
+	T##_f[2] = S##_f[2];					\
+	T##_f[3] = S##_f[3];					\
+	if (_FP_FRAC_GE_4(X,T))					\
+	  {							\
+	    S##_f[0] = T##_f[0] + q;				\
+	    S##_f[1] += (T##_f[0] > S##_f[0]);			\
+	    S##_f[2] += (T##_f[1] > S##_f[1]);			\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    _FP_FRAC_DEC_4(X, T);				\
+	    R##_f[0] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    if (!_FP_FRAC_ZEROP_4(X))					\
+      {								\
+	if (_FP_FRAC_GT_4(X,S))					\
+	  R##_f[0] |= _FP_WORK_ROUND;				\
+	R##_f[0] |= _FP_WORK_STICKY;				\
+      }								\
+  } while (0)
+
+
+/*
+ * Internals 
+ */
+
+#define __FP_FRAC_SET_4(X,I3,I2,I1,I0)					\
+  (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
+
+#ifndef __FP_FRAC_ADD_3
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)		\
+  do {								\
+    int _c1, _c2;							\
+    r0 = x0 + y0;						\
+    _c1 = r0 < x0;						\
+    r1 = x1 + y1;						\
+    _c2 = r1 < x1;						\
+    r1 += _c1;							\
+    _c2 |= r1 < _c1;						\
+    r2 = x2 + y2 + _c2;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_ADD_4
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
+  do {								\
+    int _c1, _c2, _c3;						\
+    r0 = x0 + y0;						\
+    _c1 = r0 < x0;						\
+    r1 = x1 + y1;						\
+    _c2 = r1 < x1;						\
+    r1 += _c1;							\
+    _c2 |= r1 < _c1;						\
+    r2 = x2 + y2;						\
+    _c3 = r2 < x2;						\
+    r2 += _c2;							\
+    _c3 |= r2 < _c2;						\
+    r3 = x3 + y3 + _c3;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_SUB_3
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)		\
+  do {								\
+    int _c1, _c2;							\
+    r0 = x0 - y0;						\
+    _c1 = r0 > x0;						\
+    r1 = x1 - y1;						\
+    _c2 = r1 > x1;						\
+    r1 -= _c1;							\
+    _c2 |= r1 > _c1;						\
+    r2 = x2 - y2 - _c2;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_SUB_4
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
+  do {								\
+    int _c1, _c2, _c3;						\
+    r0 = x0 - y0;						\
+    _c1 = r0 > x0;						\
+    r1 = x1 - y1;						\
+    _c2 = r1 > x1;						\
+    r1 -= _c1;							\
+    _c2 |= r1 > _c1;						\
+    r2 = x2 - y2;						\
+    _c3 = r2 > x2;						\
+    r2 -= _c2;							\
+    _c3 |= r2 > _c2;						\
+    r3 = x3 - y3 - _c3;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_DEC_3
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0)				\
+  do {									\
+    UWtype _t0, _t1, _t2;						\
+    _t0 = x0, _t1 = x1, _t2 = x2;					\
+    __FP_FRAC_SUB_3 (x2, x1, x0, _t2, _t1, _t0, y2, y1, y0);		\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_DEC_4
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0)			\
+  do {									\
+    UWtype _t0, _t1, _t2, _t3;						\
+    _t0 = x0, _t1 = x1, _t2 = x2, _t3 = x3;				\
+    __FP_FRAC_SUB_4 (x3,x2,x1,x0,_t3,_t2,_t1,_t0, y3,y2,y1,y0);		\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_ADDI_4
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  do {									\
+    UWtype _t;								\
+    _t = ((x0 += i) < i);						\
+    x1 += _t; _t = (x1 < _t);						\
+    x2 += _t; _t = (x2 < _t);						\
+    x3 += _t;								\
+  } while (0)
+#endif
+
+/* Convert FP values between word sizes. This appears to be more
+ * complicated than I'd have expected it to be, so these might be
+ * wrong... These macros are in any case somewhat bogus because they
+ * use information about what various FRAC_n variables look like 
+ * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
+ * the ones in op-2.h and op-1.h. 
+ */
+#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S)				\
+   do {									\
+     if (S##_c != FP_CLS_NAN)						\
+       _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+			  _FP_WFRACBITS_##sfs);				\
+     else								\
+       _FP_FRAC_SRL_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+     D##_f = S##_f[0];							\
+  } while (0)
+
+#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S)				\
+   do {									\
+     if (S##_c != FP_CLS_NAN)						\
+       _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+		      _FP_WFRACBITS_##sfs);				\
+     else								\
+       _FP_FRAC_SRL_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+     D##_f0 = S##_f[0];							\
+     D##_f1 = S##_f[1];							\
+  } while (0)
+
+/* Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+/* Put the FP value X into r, which is an integer of size rsize. */
+#define _FP_FRAC_ASSEMBLE_4(r, X, rsize)				\
+  do {									\
+    if (rsize <= _FP_W_TYPE_SIZE)					\
+      r = X##_f[0];							\
+    else if (rsize <= 2*_FP_W_TYPE_SIZE)				\
+    {									\
+      r = X##_f[1];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[0];							\
+    }									\
+    else								\
+    {									\
+      /* I'm feeling lazy so we deal with int == 3words (implausible)*/	\
+      /* and int == 4words as a single case.			 */	\
+      r = X##_f[3];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[2];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[1];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[0];							\
+    }									\
+  } while (0)
+
+/* "No disassemble Number Five!" */
+/* move an integer of size rsize into X's fractional part. We rely on
+ * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
+ * having to mask the values we store into it.
+ */
+#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize)				\
+  do {									\
+    X##_f[0] = r;							\
+    X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
+    X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \
+    X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \
+  } while (0)
+
+#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S)				\
+   do {									\
+     D##_f[0] = S##_f;							\
+     D##_f[1] = D##_f[2] = D##_f[3] = 0;				\
+     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+   } while (0)
+
+#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S)				\
+   do {									\
+     D##_f[0] = S##_f0;							\
+     D##_f[1] = S##_f1;							\
+     D##_f[2] = D##_f[3] = 0;						\
+     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+   } while (0)
+
+#endif
diff --git a/include/math-emu/op-8.h b/include/math-emu/op-8.h
new file mode 100644
index 000000000000..8b8c05eb8283
--- /dev/null
+++ b/include/math-emu/op-8.h
@@ -0,0 +1,107 @@
+/* Software floating-point emulation.
+   Basic eight-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+                                                         
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_8_H__
+#define __MATH_EMU_OP_8_H__
+
+/* We need just a few things from here for op-4, if we ever need some
+   other macros, they can be added. */
+#define _FP_FRAC_DECL_8(X)	_FP_W_TYPE X##_f[8]
+#define _FP_FRAC_HIGH_8(X)	(X##_f[7])
+#define _FP_FRAC_LOW_8(X)	(X##_f[0])
+#define _FP_FRAC_WORD_8(X,w)	(X##_f[w])
+
+#define _FP_FRAC_SLL_8(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _up = (N) % _FP_W_TYPE_SIZE;					\
+    _down = _FP_W_TYPE_SIZE - _up;					\
+    if (!_up)								\
+      for (_i = 7; _i >= _skip; --_i)					\
+	X##_f[_i] = X##_f[_i-_skip];					\
+    else								\
+      {									\
+	for (_i = 7; _i > _skip; --_i)					\
+	  X##_f[_i] = X##_f[_i-_skip] << _up				\
+		      | X##_f[_i-_skip-1] >> _down;			\
+	X##_f[_i--] = X##_f[0] << _up; 					\
+      }									\
+    for (; _i >= 0; --_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+#define _FP_FRAC_SRL_8(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    if (!_down)								\
+      for (_i = 0; _i <= 7-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 7-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[7] >> _down;				\
+      }									\
+    for (; _i < 8; ++_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+
+/* Right shift with sticky-lsb. 
+ * What this actually means is that we do a standard right-shift,
+ * but that if any of the bits that fall off the right hand side
+ * were one then we always set the LSbit.
+ */
+#define _FP_FRAC_SRS_8(X,N,size)					\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _FP_W_TYPE _s;							\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    for (_s = _i = 0; _i < _skip; ++_i)					\
+      _s |= X##_f[_i];							\
+    _s |= X##_f[_i] << _up;						\
+/* s is now != 0 if we want to set the LSbit */				\
+    if (!_down)								\
+      for (_i = 0; _i <= 7-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 7-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[7] >> _down;				\
+      }									\
+    for (; _i < 8; ++_i)						\
+      X##_f[_i] = 0;							\
+    /* don't fix the LSB until the very end when we're sure f[0] is stable */	\
+    X##_f[0] |= (_s != 0);						\
+  } while (0)
+
+#endif
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
new file mode 100644
index 000000000000..93780abd01bc
--- /dev/null
+++ b/include/math-emu/op-common.h
@@ -0,0 +1,853 @@
+/* Software floating-point emulation. Common operations.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_COMMON_H__
+#define __MATH_EMU_OP_COMMON_H__
+
+#define _FP_DECL(wc, X)			\
+  _FP_I_TYPE X##_c=0, X##_s=0, X##_e=0;	\
+  _FP_FRAC_DECL_##wc(X)
+
+/*
+ * Finish truely unpacking a native fp value by classifying the kind
+ * of fp value and normalizing both the exponent and the fraction.
+ */
+
+#define _FP_UNPACK_CANONICAL(fs, wc, X)					\
+do {									\
+  switch (X##_e)							\
+  {									\
+  default:								\
+    _FP_FRAC_HIGH_RAW_##fs(X) |= _FP_IMPLBIT_##fs;			\
+    _FP_FRAC_SLL_##wc(X, _FP_WORKBITS);					\
+    X##_e -= _FP_EXPBIAS_##fs;						\
+    X##_c = FP_CLS_NORMAL;						\
+    break;								\
+									\
+  case 0:								\
+    if (_FP_FRAC_ZEROP_##wc(X))						\
+      X##_c = FP_CLS_ZERO;						\
+    else								\
+      {									\
+	/* a denormalized number */					\
+	_FP_I_TYPE _shift;						\
+	_FP_FRAC_CLZ_##wc(_shift, X);					\
+	_shift -= _FP_FRACXBITS_##fs;					\
+	_FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS));			\
+	X##_e -= _FP_EXPBIAS_##fs - 1 + _shift;				\
+	X##_c = FP_CLS_NORMAL;						\
+	FP_SET_EXCEPTION(FP_EX_DENORM);					\
+	if (FP_DENORM_ZERO)						\
+	  {								\
+	    FP_SET_EXCEPTION(FP_EX_INEXACT);				\
+	    X##_c = FP_CLS_ZERO;					\
+	  }								\
+      }									\
+    break;								\
+									\
+  case _FP_EXPMAX_##fs:							\
+    if (_FP_FRAC_ZEROP_##wc(X))						\
+      X##_c = FP_CLS_INF;						\
+    else								\
+      {									\
+	X##_c = FP_CLS_NAN;						\
+	/* Check for signaling NaN */					\
+	if (!(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))		\
+	  FP_SET_EXCEPTION(FP_EX_INVALID);				\
+      }									\
+    break;								\
+  }									\
+} while (0)
+
+/*
+ * Before packing the bits back into the native fp result, take care
+ * of such mundane things as rounding and overflow.  Also, for some
+ * kinds of fp values, the original parts may not have been fully
+ * extracted -- but that is ok, we can regenerate them now.
+ */
+
+#define _FP_PACK_CANONICAL(fs, wc, X)				\
+do {								\
+  switch (X##_c)						\
+  {								\
+  case FP_CLS_NORMAL:						\
+    X##_e += _FP_EXPBIAS_##fs;					\
+    if (X##_e > 0)						\
+      {								\
+	_FP_ROUND(wc, X);					\
+	if (_FP_FRAC_OVERP_##wc(fs, X))				\
+	  {							\
+	    _FP_FRAC_CLEAR_OVERP_##wc(fs, X);			\
+	    X##_e++;						\
+	  }							\
+	_FP_FRAC_SRL_##wc(X, _FP_WORKBITS);			\
+	if (X##_e >= _FP_EXPMAX_##fs)				\
+	  {							\
+	    /* overflow */					\
+	    switch (FP_ROUNDMODE)				\
+	      {							\
+	      case FP_RND_NEAREST:				\
+		X##_c = FP_CLS_INF;				\
+		break;						\
+	      case FP_RND_PINF:					\
+		if (!X##_s) X##_c = FP_CLS_INF;			\
+		break;						\
+	      case FP_RND_MINF:					\
+		if (X##_s) X##_c = FP_CLS_INF;			\
+		break;						\
+	      }							\
+	    if (X##_c == FP_CLS_INF)				\
+	      {							\
+		/* Overflow to infinity */			\
+		X##_e = _FP_EXPMAX_##fs;			\
+		_FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+	      }							\
+	    else						\
+	      {							\
+		/* Overflow to maximum normal */		\
+		X##_e = _FP_EXPMAX_##fs - 1;			\
+		_FP_FRAC_SET_##wc(X, _FP_MAXFRAC_##wc);		\
+	      }							\
+	    FP_SET_EXCEPTION(FP_EX_OVERFLOW);			\
+            FP_SET_EXCEPTION(FP_EX_INEXACT);			\
+	  }							\
+      }								\
+    else							\
+      {								\
+	/* we've got a denormalized number */			\
+	X##_e = -X##_e + 1;					\
+	if (X##_e <= _FP_WFRACBITS_##fs)			\
+	  {							\
+	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
+	    _FP_ROUND(wc, X);					\
+	    if (_FP_FRAC_HIGH_##fs(X)				\
+		& (_FP_OVERFLOW_##fs >> 1))			\
+	      {							\
+	        X##_e = 1;					\
+	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+	      }							\
+	    else						\
+	      {							\
+		X##_e = 0;					\
+		_FP_FRAC_SRL_##wc(X, _FP_WORKBITS);		\
+		FP_SET_EXCEPTION(FP_EX_UNDERFLOW);		\
+	      }							\
+	  }							\
+	else							\
+	  {							\
+	    /* underflow to zero */				\
+	    X##_e = 0;						\
+	    if (!_FP_FRAC_ZEROP_##wc(X))			\
+	      {							\
+	        _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);		\
+	        _FP_ROUND(wc, X);				\
+	        _FP_FRAC_LOW_##wc(X) >>= (_FP_WORKBITS);	\
+	      }							\
+	    FP_SET_EXCEPTION(FP_EX_UNDERFLOW);			\
+	  }							\
+      }								\
+    break;							\
+								\
+  case FP_CLS_ZERO:						\
+    X##_e = 0;							\
+    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
+    break;							\
+								\
+  case FP_CLS_INF:						\
+    X##_e = _FP_EXPMAX_##fs;					\
+    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
+    break;							\
+								\
+  case FP_CLS_NAN:						\
+    X##_e = _FP_EXPMAX_##fs;					\
+    if (!_FP_KEEPNANFRACP)					\
+      {								\
+	_FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs);			\
+	X##_s = _FP_NANSIGN_##fs;				\
+      }								\
+    else							\
+      _FP_FRAC_HIGH_RAW_##fs(X) |= _FP_QNANBIT_##fs;		\
+    break;							\
+  }								\
+} while (0)
+
+/* This one accepts raw argument and not cooked,  returns
+ * 1 if X is a signaling NaN.
+ */
+#define _FP_ISSIGNAN(fs, wc, X)					\
+({								\
+  int __ret = 0;						\
+  if (X##_e == _FP_EXPMAX_##fs)					\
+    {								\
+      if (!_FP_FRAC_ZEROP_##wc(X)				\
+	  && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+	__ret = 1;						\
+    }								\
+  __ret;							\
+})
+
+
+
+
+
+/*
+ * Main addition routine.  The input values should be cooked.
+ */
+
+#define _FP_ADD_INTERNAL(fs, wc, R, X, Y, OP)				     \
+do {									     \
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))				     \
+  {									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):			     \
+    {									     \
+      /* shift the smaller number so that its exponent matches the larger */ \
+      _FP_I_TYPE diff = X##_e - Y##_e;					     \
+									     \
+      if (diff < 0)							     \
+	{								     \
+	  diff = -diff;							     \
+	  if (diff <= _FP_WFRACBITS_##fs)				     \
+	    _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs);		     \
+	  else if (!_FP_FRAC_ZEROP_##wc(X))				     \
+	    _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);			     \
+	  R##_e = Y##_e;						     \
+	}								     \
+      else								     \
+	{								     \
+	  if (diff > 0)							     \
+	    {								     \
+	      if (diff <= _FP_WFRACBITS_##fs)				     \
+	        _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs);		     \
+	      else if (!_FP_FRAC_ZEROP_##wc(Y))				     \
+	        _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc);			     \
+	    }								     \
+	  R##_e = X##_e;						     \
+	}								     \
+									     \
+      R##_c = FP_CLS_NORMAL;						     \
+									     \
+      if (X##_s == Y##_s)						     \
+	{								     \
+	  R##_s = X##_s;						     \
+	  _FP_FRAC_ADD_##wc(R, X, Y);					     \
+	  if (_FP_FRAC_OVERP_##wc(fs, R))				     \
+	    {								     \
+	      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);		     \
+	      R##_e++;							     \
+	    }								     \
+	}								     \
+      else								     \
+	{								     \
+	  R##_s = X##_s;						     \
+	  _FP_FRAC_SUB_##wc(R, X, Y);					     \
+	  if (_FP_FRAC_ZEROP_##wc(R))					     \
+	    {								     \
+	      /* return an exact zero */				     \
+	      if (FP_ROUNDMODE == FP_RND_MINF)				     \
+		R##_s |= Y##_s;						     \
+	      else							     \
+		R##_s &= Y##_s;						     \
+	      R##_c = FP_CLS_ZERO;					     \
+	    }								     \
+	  else								     \
+	    {								     \
+	      if (_FP_FRAC_NEGP_##wc(R))				     \
+		{							     \
+		  _FP_FRAC_SUB_##wc(R, Y, X);				     \
+		  R##_s = Y##_s;					     \
+		}							     \
+									     \
+	      /* renormalize after subtraction */			     \
+	      _FP_FRAC_CLZ_##wc(diff, R);				     \
+	      diff -= _FP_WFRACXBITS_##fs;				     \
+	      if (diff)							     \
+		{							     \
+		  R##_e -= diff;					     \
+		  _FP_FRAC_SLL_##wc(R, diff);				     \
+		}							     \
+	    }								     \
+	}								     \
+      break;								     \
+    }									     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):				     \
+    _FP_CHOOSENAN(fs, wc, R, X, Y, OP);					     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):			     \
+    R##_e = X##_e;							     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):			     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):				     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):				     \
+    _FP_FRAC_COPY_##wc(R, X);						     \
+    R##_s = X##_s;							     \
+    R##_c = X##_c;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):			     \
+    R##_e = Y##_e;							     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):			     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):				     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):				     \
+    _FP_FRAC_COPY_##wc(R, Y);						     \
+    R##_s = Y##_s;							     \
+    R##_c = Y##_c;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):				     \
+    if (X##_s != Y##_s)							     \
+      {									     \
+	/* +INF + -INF => NAN */					     \
+	_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);				     \
+	R##_s = _FP_NANSIGN_##fs;					     \
+	R##_c = FP_CLS_NAN;						     \
+	FP_SET_EXCEPTION(FP_EX_INVALID);				     \
+	break;								     \
+      }									     \
+    /* FALLTHRU */							     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):			     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):				     \
+    R##_s = X##_s;							     \
+    R##_c = FP_CLS_INF;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):			     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):				     \
+    R##_s = Y##_s;							     \
+    R##_c = FP_CLS_INF;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):			     \
+    /* make sure the sign is correct */					     \
+    if (FP_ROUNDMODE == FP_RND_MINF)					     \
+      R##_s = X##_s | Y##_s;						     \
+    else								     \
+      R##_s = X##_s & Y##_s;						     \
+    R##_c = FP_CLS_ZERO;						     \
+    break;								     \
+									     \
+  default:								     \
+    abort();								     \
+  }									     \
+} while (0)
+
+#define _FP_ADD(fs, wc, R, X, Y) _FP_ADD_INTERNAL(fs, wc, R, X, Y, '+')
+#define _FP_SUB(fs, wc, R, X, Y)					     \
+  do {									     \
+    if (Y##_c != FP_CLS_NAN) Y##_s ^= 1;				     \
+    _FP_ADD_INTERNAL(fs, wc, R, X, Y, '-');				     \
+  } while (0)
+
+
+/*
+ * Main negation routine.  FIXME -- when we care about setting exception
+ * bits reliably, this will not do.  We should examine all of the fp classes.
+ */
+
+#define _FP_NEG(fs, wc, R, X)		\
+  do {					\
+    _FP_FRAC_COPY_##wc(R, X);		\
+    R##_c = X##_c;			\
+    R##_e = X##_e;			\
+    R##_s = 1 ^ X##_s;			\
+  } while (0)
+
+
+/*
+ * Main multiplication routine.  The input values should be cooked.
+ */
+
+#define _FP_MUL(fs, wc, R, X, Y)			\
+do {							\
+  R##_s = X##_s ^ Y##_s;				\
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
+  {							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_NORMAL;				\
+    R##_e = X##_e + Y##_e + 1;				\
+							\
+    _FP_MUL_MEAT_##fs(R,X,Y);				\
+							\
+    if (_FP_FRAC_OVERP_##wc(fs, R))			\
+      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);	\
+    else						\
+      R##_e--;						\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
+    _FP_CHOOSENAN(fs, wc, R, X, Y, '*');		\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
+    R##_s = X##_s;					\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
+    _FP_FRAC_COPY_##wc(R, X);				\
+    R##_c = X##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
+    R##_s = Y##_s;					\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
+    _FP_FRAC_COPY_##wc(R, Y);				\
+    R##_c = Y##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
+    R##_s = _FP_NANSIGN_##fs;				\
+    R##_c = FP_CLS_NAN;					\
+    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
+    FP_SET_EXCEPTION(FP_EX_INVALID);			\
+    break;						\
+							\
+  default:						\
+    abort();						\
+  }							\
+} while (0)
+
+
+/*
+ * Main division routine.  The input values should be cooked.
+ */
+
+#define _FP_DIV(fs, wc, R, X, Y)			\
+do {							\
+  R##_s = X##_s ^ Y##_s;				\
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
+  {							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_NORMAL;				\
+    R##_e = X##_e - Y##_e;				\
+							\
+    _FP_DIV_MEAT_##fs(R,X,Y);				\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
+    _FP_CHOOSENAN(fs, wc, R, X, Y, '/');		\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
+    R##_s = X##_s;					\
+    _FP_FRAC_COPY_##wc(R, X);				\
+    R##_c = X##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
+    R##_s = Y##_s;					\
+    _FP_FRAC_COPY_##wc(R, Y);				\
+    R##_c = Y##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_ZERO;				\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
+    FP_SET_EXCEPTION(FP_EX_DIVZERO);			\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_INF;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
+    R##_s = _FP_NANSIGN_##fs;				\
+    R##_c = FP_CLS_NAN;					\
+    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
+    FP_SET_EXCEPTION(FP_EX_INVALID);			\
+    break;						\
+							\
+  default:						\
+    abort();						\
+  }							\
+} while (0)
+
+
+/*
+ * Main differential comparison routine.  The inputs should be raw not
+ * cooked.  The return is -1,0,1 for normal values, 2 otherwise.
+ */
+
+#define _FP_CMP(fs, wc, ret, X, Y, un)					\
+  do {									\
+    /* NANs are unordered */						\
+    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		\
+	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	\
+      {									\
+	ret = un;							\
+      }									\
+    else								\
+      {									\
+	int __is_zero_x;						\
+	int __is_zero_y;						\
+									\
+	__is_zero_x = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0;	\
+	__is_zero_y = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0;	\
+									\
+	if (__is_zero_x && __is_zero_y)					\
+		ret = 0;						\
+	else if (__is_zero_x)						\
+		ret = Y##_s ? 1 : -1;					\
+	else if (__is_zero_y)						\
+		ret = X##_s ? -1 : 1;					\
+	else if (X##_s != Y##_s)					\
+	  ret = X##_s ? -1 : 1;						\
+	else if (X##_e > Y##_e)						\
+	  ret = X##_s ? -1 : 1;						\
+	else if (X##_e < Y##_e)						\
+	  ret = X##_s ? 1 : -1;						\
+	else if (_FP_FRAC_GT_##wc(X, Y))				\
+	  ret = X##_s ? -1 : 1;						\
+	else if (_FP_FRAC_GT_##wc(Y, X))				\
+	  ret = X##_s ? 1 : -1;						\
+	else								\
+	  ret = 0;							\
+      }									\
+  } while (0)
+
+
+/* Simplification for strict equality.  */
+
+#define _FP_CMP_EQ(fs, wc, ret, X, Y)					  \
+  do {									  \
+    /* NANs are unordered */						  \
+    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		  \
+	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	  \
+      {									  \
+	ret = 1;							  \
+      }									  \
+    else								  \
+      {									  \
+	ret = !(X##_e == Y##_e						  \
+		&& _FP_FRAC_EQ_##wc(X, Y)				  \
+		&& (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \
+      }									  \
+  } while (0)
+
+/*
+ * Main square root routine.  The input value should be cooked.
+ */
+
+#define _FP_SQRT(fs, wc, R, X)						\
+do {									\
+    _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S);			\
+    _FP_W_TYPE q;							\
+    switch (X##_c)							\
+    {									\
+    case FP_CLS_NAN:							\
+	_FP_FRAC_COPY_##wc(R, X);					\
+	R##_s = X##_s;							\
+    	R##_c = FP_CLS_NAN;						\
+    	break;								\
+    case FP_CLS_INF:							\
+    	if (X##_s)							\
+    	  {								\
+    	    R##_s = _FP_NANSIGN_##fs;					\
+	    R##_c = FP_CLS_NAN; /* NAN */				\
+	    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);			\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);				\
+    	  }								\
+    	else								\
+    	  {								\
+    	    R##_s = 0;							\
+    	    R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */			\
+    	  }								\
+    	break;								\
+    case FP_CLS_ZERO:							\
+	R##_s = X##_s;							\
+	R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */			\
+	break;								\
+    case FP_CLS_NORMAL:							\
+    	R##_s = 0;							\
+        if (X##_s)							\
+          {								\
+	    R##_c = FP_CLS_NAN; /* sNAN */				\
+	    R##_s = _FP_NANSIGN_##fs;					\
+	    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);			\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);				\
+	    break;							\
+          }								\
+    	R##_c = FP_CLS_NORMAL;						\
+        if (X##_e & 1)							\
+          _FP_FRAC_SLL_##wc(X, 1);					\
+        R##_e = X##_e >> 1;						\
+        _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc);			\
+        _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc);			\
+        q = _FP_OVERFLOW_##fs >> 1;					\
+        _FP_SQRT_MEAT_##wc(R, S, T, X, q);				\
+    }									\
+  } while (0)
+
+/*
+ * Convert from FP to integer
+ */
+
+/* RSIGNED can have following values:
+ * 0:  the number is required to be 0..(2^rsize)-1, if not, NV is set plus
+ *     the result is either 0 or (2^rsize)-1 depending on the sign in such case.
+ * 1:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not, NV is
+ *     set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1 depending
+ *     on the sign in such case.
+ * 2:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not, NV is
+ *     set plus the result is truncated to fit into destination.
+ * -1: the number is required to be -(2^(rsize-1))..(2^rsize)-1, if not, NV is
+ *     set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1 depending
+ *     on the sign in such case.
+ */
+#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned)				\
+  do {										\
+    switch (X##_c)								\
+      {										\
+      case FP_CLS_NORMAL:							\
+	if (X##_e < 0)								\
+	  {									\
+	    FP_SET_EXCEPTION(FP_EX_INEXACT);					\
+	  case FP_CLS_ZERO:							\
+	    r = 0;								\
+	  }									\
+	else if (X##_e >= rsize - (rsigned > 0 || X##_s)			\
+		 || (!rsigned && X##_s))					\
+	  {	/* overflow */							\
+	  case FP_CLS_NAN:                                                      \
+	  case FP_CLS_INF:							\
+	    if (rsigned == 2)							\
+	      {									\
+		if (X##_c != FP_CLS_NORMAL					\
+		    || X##_e >= rsize - 1 + _FP_WFRACBITS_##fs)			\
+		  r = 0;							\
+		else								\
+		  {								\
+		    _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));	\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		  }								\
+	      }									\
+	    else if (rsigned)							\
+	      {									\
+		r = 1;								\
+		r <<= rsize - 1;						\
+		r -= 1 - X##_s;							\
+	      }									\
+	    else								\
+	      {									\
+		r = 0;								\
+		if (X##_s)							\
+		  r = ~r;							\
+	      }									\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);					\
+	  }									\
+	else									\
+	  {									\
+	    if (_FP_W_TYPE_SIZE*wc < rsize)					\
+	      {									\
+		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+		r <<= X##_e - _FP_WFRACBITS_##fs;				\
+	      }									\
+	    else								\
+	      {									\
+		if (X##_e >= _FP_WFRACBITS_##fs)				\
+		  _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));	\
+		else if (X##_e < _FP_WFRACBITS_##fs - 1)			\
+		  {								\
+		    _FP_FRAC_SRS_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 2),	\
+				      _FP_WFRACBITS_##fs);			\
+		    if (_FP_FRAC_LOW_##wc(X) & 1)				\
+		      FP_SET_EXCEPTION(FP_EX_INEXACT);				\
+		    _FP_FRAC_SRL_##wc(X, 1);					\
+		  }								\
+		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+	      }									\
+	    if (rsigned && X##_s)						\
+	      r = -r;								\
+	  }									\
+	break;									\
+      }										\
+  } while (0)
+
+#define _FP_TO_INT_ROUND(fs, wc, r, X, rsize, rsigned)				\
+  do {										\
+    r = 0;									\
+    switch (X##_c)								\
+      {										\
+      case FP_CLS_NORMAL:							\
+	if (X##_e >= _FP_FRACBITS_##fs - 1)					\
+	  {									\
+	    if (X##_e < rsize - 1 + _FP_WFRACBITS_##fs)				\
+	      {									\
+		if (X##_e >= _FP_WFRACBITS_##fs - 1)				\
+		  {								\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		    r <<= X##_e - _FP_WFRACBITS_##fs + 1;			\
+		  }								\
+		else								\
+		  {								\
+		    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS - X##_e			\
+				      + _FP_FRACBITS_##fs - 1);			\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		  }								\
+	      }									\
+	  }									\
+	else									\
+	  {									\
+	    if (X##_e <= -_FP_WORKBITS - 1)					\
+	      _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);				\
+	    else								\
+	      _FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e,		\
+				_FP_WFRACBITS_##fs);				\
+	    _FP_ROUND(wc, X);							\
+	    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);					\
+	    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+	  }									\
+	if (rsigned && X##_s)							\
+	  r = -r;								\
+	if (X##_e >= rsize - (rsigned > 0 || X##_s)				\
+	    || (!rsigned && X##_s))						\
+	  {	/* overflow */							\
+	  case FP_CLS_NAN:                                                      \
+	  case FP_CLS_INF:							\
+	    if (!rsigned)							\
+	      {									\
+		r = 0;								\
+		if (X##_s)							\
+		  r = ~r;							\
+	      }									\
+	    else if (rsigned != 2)						\
+	      {									\
+		r = 1;								\
+		r <<= rsize - 1;						\
+		r -= 1 - X##_s;							\
+	      }									\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);					\
+	  }									\
+	break;									\
+      case FP_CLS_ZERO:								\
+        break;									\
+      }										\
+  } while (0)
+
+#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype)			\
+  do {									\
+    if (r)								\
+      {									\
+        unsigned rtype ur_;						\
+	X##_c = FP_CLS_NORMAL;						\
+									\
+	if ((X##_s = (r < 0)))						\
+	  ur_ = (unsigned rtype) -r;					\
+	else								\
+	  ur_ = (unsigned rtype) r;					\
+	if (rsize <= _FP_W_TYPE_SIZE)					\
+	  __FP_CLZ(X##_e, ur_);						\
+	else								\
+	  __FP_CLZ_2(X##_e, (_FP_W_TYPE)(ur_ >> _FP_W_TYPE_SIZE), 	\
+		     (_FP_W_TYPE)ur_);					\
+	if (rsize < _FP_W_TYPE_SIZE)					\
+		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
+	X##_e = rsize - X##_e - 1;					\
+									\
+	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e)	\
+	  __FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
+	_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize);			\
+	if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0)			\
+	  _FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));	\
+      }									\
+    else								\
+      {									\
+	X##_c = FP_CLS_ZERO, X##_s = 0;					\
+      }									\
+  } while (0)
+
+
+#define FP_CONV(dfs,sfs,dwc,swc,D,S)			\
+  do {							\
+    _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S);	\
+    D##_e = S##_e;					\
+    D##_c = S##_c;					\
+    D##_s = S##_s;					\
+  } while (0)
+
+/*
+ * Helper primitives.
+ */
+
+/* Count leading zeros in a word.  */
+
+#ifndef __FP_CLZ
+#if _FP_W_TYPE_SIZE < 64
+/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */
+#define __FP_CLZ(r, x)				\
+  do {						\
+    _FP_W_TYPE _t = (x);			\
+    r = _FP_W_TYPE_SIZE - 1;			\
+    if (_t > 0xffff) r -= 16;			\
+    if (_t > 0xffff) _t >>= 16;			\
+    if (_t > 0xff) r -= 8;			\
+    if (_t > 0xff) _t >>= 8;			\
+    if (_t & 0xf0) r -= 4;			\
+    if (_t & 0xf0) _t >>= 4;			\
+    if (_t & 0xc) r -= 2;			\
+    if (_t & 0xc) _t >>= 2;			\
+    if (_t & 0x2) r -= 1;			\
+  } while (0)
+#else /* not _FP_W_TYPE_SIZE < 64 */
+#define __FP_CLZ(r, x)				\
+  do {						\
+    _FP_W_TYPE _t = (x);			\
+    r = _FP_W_TYPE_SIZE - 1;			\
+    if (_t > 0xffffffff) r -= 32;		\
+    if (_t > 0xffffffff) _t >>= 32;		\
+    if (_t > 0xffff) r -= 16;			\
+    if (_t > 0xffff) _t >>= 16;			\
+    if (_t > 0xff) r -= 8;			\
+    if (_t > 0xff) _t >>= 8;			\
+    if (_t & 0xf0) r -= 4;			\
+    if (_t & 0xf0) _t >>= 4;			\
+    if (_t & 0xc) r -= 2;			\
+    if (_t & 0xc) _t >>= 2;			\
+    if (_t & 0x2) r -= 1;			\
+  } while (0)
+#endif /* not _FP_W_TYPE_SIZE < 64 */
+#endif /* ndef __FP_CLZ */
+
+#define _FP_DIV_HELP_imm(q, r, n, d)		\
+  do {						\
+    q = n / d, r = n % d;			\
+  } while (0)
+
+#endif /* __MATH_EMU_OP_COMMON_H__ */
diff --git a/include/math-emu/quad.h b/include/math-emu/quad.h
new file mode 100644
index 000000000000..616113626d09
--- /dev/null
+++ b/include/math-emu/quad.h
@@ -0,0 +1,208 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Quad Precision.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef  __MATH_EMU_QUAD_H__
+#define  __MATH_EMU_QUAD_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel, kid. Go buy yourself a real computer."
+#endif
+
+#if _FP_W_TYPE_SIZE < 64
+#define _FP_FRACTBITS_Q         (4*_FP_W_TYPE_SIZE)
+#else
+#define _FP_FRACTBITS_Q		(2*_FP_W_TYPE_SIZE)
+#endif
+
+#define _FP_FRACBITS_Q		113
+#define _FP_FRACXBITS_Q		(_FP_FRACTBITS_Q - _FP_FRACBITS_Q)
+#define _FP_WFRACBITS_Q		(_FP_WORKBITS + _FP_FRACBITS_Q)
+#define _FP_WFRACXBITS_Q	(_FP_FRACTBITS_Q - _FP_WFRACBITS_Q)
+#define _FP_EXPBITS_Q		15
+#define _FP_EXPBIAS_Q		16383
+#define _FP_EXPMAX_Q		32767
+
+#define _FP_QNANBIT_Q		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_Q-2) % _FP_W_TYPE_SIZE)
+#define _FP_IMPLBIT_Q		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_Q-1) % _FP_W_TYPE_SIZE)
+#define _FP_OVERFLOW_Q		\
+	((_FP_W_TYPE)1 << (_FP_WFRACBITS_Q % _FP_W_TYPE_SIZE))
+
+#if _FP_W_TYPE_SIZE < 64
+
+union _FP_UNION_Q
+{
+   long double flt;
+   struct 
+   {
+#if __BYTE_ORDER == __BIG_ENDIAN
+      unsigned sign : 1;
+      unsigned exp : _FP_EXPBITS_Q;
+      unsigned long frac3 : _FP_FRACBITS_Q - (_FP_IMPLBIT_Q != 0)-(_FP_W_TYPE_SIZE * 3);
+      unsigned long frac2 : _FP_W_TYPE_SIZE;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+#else
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned long frac2 : _FP_W_TYPE_SIZE;
+      unsigned long frac3 : _FP_FRACBITS_Q - (_FP_IMPLBIT_Q != 0)-(_FP_W_TYPE_SIZE * 3);
+      unsigned exp : _FP_EXPBITS_Q;
+      unsigned sign : 1;
+#endif /* not bigendian */
+   } bits __attribute__((packed));
+};
+
+
+#define FP_DECL_Q(X)		_FP_DECL(4,X)
+#define FP_UNPACK_RAW_Q(X,val)	_FP_UNPACK_RAW_4(Q,X,val)
+#define FP_UNPACK_RAW_QP(X,val)	_FP_UNPACK_RAW_4_P(Q,X,val)
+#define FP_PACK_RAW_Q(val,X)	_FP_PACK_RAW_4(Q,val,X)
+#define FP_PACK_RAW_QP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_4_P(Q,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_Q(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_4(Q,X,val);		\
+    _FP_UNPACK_CANONICAL(Q,4,X);	\
+  } while (0)
+
+#define FP_UNPACK_QP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_4_P(Q,X,val);	\
+    _FP_UNPACK_CANONICAL(Q,4,X);	\
+  } while (0)
+
+#define FP_PACK_Q(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,4,X);		\
+    _FP_PACK_RAW_4(Q,val,X);		\
+  } while (0)
+
+#define FP_PACK_QP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,4,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_4_P(Q,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_Q(X)		_FP_ISSIGNAN(Q,4,X)
+#define FP_NEG_Q(R,X)			_FP_NEG(Q,4,R,X)
+#define FP_ADD_Q(R,X,Y)			_FP_ADD(Q,4,R,X,Y)
+#define FP_SUB_Q(R,X,Y)			_FP_SUB(Q,4,R,X,Y)
+#define FP_MUL_Q(R,X,Y)			_FP_MUL(Q,4,R,X,Y)
+#define FP_DIV_Q(R,X,Y)			_FP_DIV(Q,4,R,X,Y)
+#define FP_SQRT_Q(R,X)			_FP_SQRT(Q,4,R,X)
+#define _FP_SQRT_MEAT_Q(R,S,T,X,Q)	_FP_SQRT_MEAT_4(R,S,T,X,Q)
+
+#define FP_CMP_Q(r,X,Y,un)	_FP_CMP(Q,4,r,X,Y,un)
+#define FP_CMP_EQ_Q(r,X,Y)	_FP_CMP_EQ(Q,4,r,X,Y)
+
+#define FP_TO_INT_Q(r,X,rsz,rsg)	_FP_TO_INT(Q,4,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_Q(r,X,rsz,rsg)	_FP_TO_INT_ROUND(Q,4,r,X,rsz,rsg)
+#define FP_FROM_INT_Q(X,r,rs,rt)	_FP_FROM_INT(Q,4,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_Q(X)	_FP_FRAC_HIGH_4(X)
+#define _FP_FRAC_HIGH_RAW_Q(X)	_FP_FRAC_HIGH_4(X)
+
+#else   /* not _FP_W_TYPE_SIZE < 64 */
+union _FP_UNION_Q
+{
+  long double flt /* __attribute__((mode(TF))) */ ;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign  : 1;
+    unsigned exp   : _FP_EXPBITS_Q;
+    unsigned long frac1 : _FP_FRACBITS_Q-(_FP_IMPLBIT_Q != 0)-_FP_W_TYPE_SIZE;
+    unsigned long frac0 : _FP_W_TYPE_SIZE;
+#else
+    unsigned long frac0 : _FP_W_TYPE_SIZE;
+    unsigned long frac1 : _FP_FRACBITS_Q-(_FP_IMPLBIT_Q != 0)-_FP_W_TYPE_SIZE;
+    unsigned exp   : _FP_EXPBITS_Q;
+    unsigned sign  : 1;
+#endif
+  } bits;
+};
+
+#define FP_DECL_Q(X)		_FP_DECL(2,X)
+#define FP_UNPACK_RAW_Q(X,val)	_FP_UNPACK_RAW_2(Q,X,val)
+#define FP_UNPACK_RAW_QP(X,val)	_FP_UNPACK_RAW_2_P(Q,X,val)
+#define FP_PACK_RAW_Q(val,X)	_FP_PACK_RAW_2(Q,val,X)
+#define FP_PACK_RAW_QP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(Q,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_Q(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2(Q,X,val);		\
+    _FP_UNPACK_CANONICAL(Q,2,X);	\
+  } while (0)
+
+#define FP_UNPACK_QP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2_P(Q,X,val);	\
+    _FP_UNPACK_CANONICAL(Q,2,X);	\
+  } while (0)
+
+#define FP_PACK_Q(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,2,X);		\
+    _FP_PACK_RAW_2(Q,val,X);		\
+  } while (0)
+
+#define FP_PACK_QP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,2,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(Q,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_Q(X)		_FP_ISSIGNAN(Q,2,X)
+#define FP_NEG_Q(R,X)			_FP_NEG(Q,2,R,X)
+#define FP_ADD_Q(R,X,Y)			_FP_ADD(Q,2,R,X,Y)
+#define FP_SUB_Q(R,X,Y)			_FP_SUB(Q,2,R,X,Y)
+#define FP_MUL_Q(R,X,Y)			_FP_MUL(Q,2,R,X,Y)
+#define FP_DIV_Q(R,X,Y)			_FP_DIV(Q,2,R,X,Y)
+#define FP_SQRT_Q(R,X)			_FP_SQRT(Q,2,R,X)
+#define _FP_SQRT_MEAT_Q(R,S,T,X,Q)	_FP_SQRT_MEAT_2(R,S,T,X,Q)
+
+#define FP_CMP_Q(r,X,Y,un)	_FP_CMP(Q,2,r,X,Y,un)
+#define FP_CMP_EQ_Q(r,X,Y)	_FP_CMP_EQ(Q,2,r,X,Y)
+
+#define FP_TO_INT_Q(r,X,rsz,rsg)	_FP_TO_INT(Q,2,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_Q(r,X,rsz,rsg)	_FP_TO_INT_ROUND(Q,2,r,X,rsz,rsg)
+#define FP_FROM_INT_Q(X,r,rs,rt)	_FP_FROM_INT(Q,2,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_Q(X)	_FP_FRAC_HIGH_2(X)
+#define _FP_FRAC_HIGH_RAW_Q(X)	_FP_FRAC_HIGH_2(X)
+
+#endif /* not _FP_W_TYPE_SIZE < 64 */
+
+#endif /* __MATH_EMU_QUAD_H__ */
diff --git a/include/math-emu/single.h b/include/math-emu/single.h
new file mode 100644
index 000000000000..87f90b0f9e5d
--- /dev/null
+++ b/include/math-emu/single.h
@@ -0,0 +1,116 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Single Precision.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_SINGLE_H__
+#define    __MATH_EMU_SINGLE_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel kid.  Go buy yourself a real computer."
+#endif
+
+#define _FP_FRACBITS_S		24
+#define _FP_FRACXBITS_S		(_FP_W_TYPE_SIZE - _FP_FRACBITS_S)
+#define _FP_WFRACBITS_S		(_FP_WORKBITS + _FP_FRACBITS_S)
+#define _FP_WFRACXBITS_S	(_FP_W_TYPE_SIZE - _FP_WFRACBITS_S)
+#define _FP_EXPBITS_S		8
+#define _FP_EXPBIAS_S		127
+#define _FP_EXPMAX_S		255
+#define _FP_QNANBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2))
+#define _FP_IMPLBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1))
+#define _FP_OVERFLOW_S		((_FP_W_TYPE)1 << (_FP_WFRACBITS_S))
+
+/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be
+   chosen by the target machine.  */
+
+union _FP_UNION_S
+{
+  float flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign : 1;
+    unsigned exp  : _FP_EXPBITS_S;
+    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
+#else
+    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
+    unsigned exp  : _FP_EXPBITS_S;
+    unsigned sign : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_S(X)		_FP_DECL(1,X)
+#define FP_UNPACK_RAW_S(X,val)	_FP_UNPACK_RAW_1(S,X,val)
+#define FP_UNPACK_RAW_SP(X,val)	_FP_UNPACK_RAW_1_P(S,X,val)
+#define FP_PACK_RAW_S(val,X)	_FP_PACK_RAW_1(S,val,X)
+#define FP_PACK_RAW_SP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(S,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_S(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1(S,X,val);		\
+    _FP_UNPACK_CANONICAL(S,1,X);	\
+  } while (0)
+
+#define FP_UNPACK_SP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1_P(S,X,val);	\
+    _FP_UNPACK_CANONICAL(S,1,X);	\
+  } while (0)
+
+#define FP_PACK_S(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(S,1,X);		\
+    _FP_PACK_RAW_1(S,val,X);		\
+  } while (0)
+
+#define FP_PACK_SP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(S,1,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(S,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_S(X)		_FP_ISSIGNAN(S,1,X)
+#define FP_NEG_S(R,X)			_FP_NEG(S,1,R,X)
+#define FP_ADD_S(R,X,Y)			_FP_ADD(S,1,R,X,Y)
+#define FP_SUB_S(R,X,Y)			_FP_SUB(S,1,R,X,Y)
+#define FP_MUL_S(R,X,Y)			_FP_MUL(S,1,R,X,Y)
+#define FP_DIV_S(R,X,Y)			_FP_DIV(S,1,R,X,Y)
+#define FP_SQRT_S(R,X)			_FP_SQRT(S,1,R,X)
+#define _FP_SQRT_MEAT_S(R,S,T,X,Q)	_FP_SQRT_MEAT_1(R,S,T,X,Q)
+
+#define FP_CMP_S(r,X,Y,un)	_FP_CMP(S,1,r,X,Y,un)
+#define FP_CMP_EQ_S(r,X,Y)	_FP_CMP_EQ(S,1,r,X,Y)
+
+#define FP_TO_INT_S(r,X,rsz,rsg)	_FP_TO_INT(S,1,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_S(r,X,rsz,rsg)	_FP_TO_INT_ROUND(S,1,r,X,rsz,rsg)
+#define FP_FROM_INT_S(X,r,rs,rt)	_FP_FROM_INT(S,1,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_S(X)	_FP_FRAC_HIGH_1(X)
+#define _FP_FRAC_HIGH_RAW_S(X)	_FP_FRAC_HIGH_1(X)
+
+#endif /* __MATH_EMU_SINGLE_H__ */
diff --git a/include/math-emu/soft-fp.h b/include/math-emu/soft-fp.h
new file mode 100644
index 000000000000..d02eb64a865b
--- /dev/null
+++ b/include/math-emu/soft-fp.h
@@ -0,0 +1,181 @@
+/* Software floating-point emulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_SOFT_FP_H__
+#define __MATH_EMU_SOFT_FP_H__
+
+#include <asm/sfp-machine.h>
+
+/* Allow sfp-machine to have its own byte order definitions. */
+#ifndef __BYTE_ORDER
+#include <endian.h>
+#endif
+
+#define _FP_WORKBITS		3
+#define _FP_WORK_LSB		((_FP_W_TYPE)1 << 3)
+#define _FP_WORK_ROUND		((_FP_W_TYPE)1 << 2)
+#define _FP_WORK_GUARD		((_FP_W_TYPE)1 << 1)
+#define _FP_WORK_STICKY		((_FP_W_TYPE)1 << 0)
+
+#ifndef FP_RND_NEAREST
+# define FP_RND_NEAREST		0
+# define FP_RND_ZERO		1
+# define FP_RND_PINF		2
+# define FP_RND_MINF		3
+#ifndef FP_ROUNDMODE
+# define FP_ROUNDMODE		FP_RND_NEAREST
+#endif
+#endif
+
+/* By default don't care about exceptions. */
+#ifndef FP_EX_INVALID
+#define FP_EX_INVALID		0
+#endif
+#ifndef FP_EX_OVERFLOW
+#define FP_EX_OVERFLOW		0
+#endif
+#ifndef FP_EX_UNDERFLOW
+#define FP_EX_UNDERFLOW		
+#endif
+#ifndef FP_EX_DIVZERO
+#define FP_EX_DIVZERO		0
+#endif
+#ifndef FP_EX_INEXACT
+#define FP_EX_INEXACT		0
+#endif
+#ifndef FP_EX_DENORM
+#define FP_EX_DENORM		0
+#endif
+
+#ifdef _FP_DECL_EX
+#define FP_DECL_EX					\
+  int _fex = 0;						\
+  _FP_DECL_EX
+#else
+#define FP_DECL_EX int _fex = 0
+#endif
+  
+#ifndef FP_INIT_ROUNDMODE
+#define FP_INIT_ROUNDMODE do {} while (0)
+#endif
+
+#ifndef FP_HANDLE_EXCEPTIONS
+#define FP_HANDLE_EXCEPTIONS do {} while (0)
+#endif
+
+/* By default we never flush denormal input operands to signed zero. */
+#ifndef FP_DENORM_ZERO
+#define FP_DENORM_ZERO 0
+#endif
+
+#ifndef FP_INHIBIT_RESULTS
+/* By default we write the results always.
+ * sfp-machine may override this and e.g.
+ * check if some exceptions are unmasked
+ * and inhibit it in such a case.
+ */
+#define FP_INHIBIT_RESULTS 0
+#endif
+
+#define FP_SET_EXCEPTION(ex)				\
+  _fex |= (ex)
+  
+#define FP_UNSET_EXCEPTION(ex)				\
+  _fex &= ~(ex)
+
+#define FP_CLEAR_EXCEPTIONS				\
+  _fex = 0
+
+#define _FP_ROUND_NEAREST(wc, X)			\
+do {							\
+    if ((_FP_FRAC_LOW_##wc(X) & 15) != _FP_WORK_ROUND)	\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
+} while (0)
+
+#define _FP_ROUND_ZERO(wc, X)		0
+
+#define _FP_ROUND_PINF(wc, X)				\
+do {							\
+    if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
+} while (0)
+
+#define _FP_ROUND_MINF(wc, X)				\
+do {							\
+    if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
+} while (0)
+
+#define _FP_ROUND(wc, X)			\
+do {						\
+	if (_FP_FRAC_LOW_##wc(X) & 7)		\
+	  FP_SET_EXCEPTION(FP_EX_INEXACT);	\
+	switch (FP_ROUNDMODE)			\
+	{					\
+	  case FP_RND_NEAREST:			\
+	    _FP_ROUND_NEAREST(wc,X);		\
+	    break;				\
+	  case FP_RND_ZERO:			\
+	    _FP_ROUND_ZERO(wc,X);		\
+	    break;				\
+	  case FP_RND_PINF:			\
+	    _FP_ROUND_PINF(wc,X);		\
+	    break;				\
+	  case FP_RND_MINF:			\
+	    _FP_ROUND_MINF(wc,X);		\
+	    break;				\
+	}					\
+} while (0)
+
+#define FP_CLS_NORMAL		0
+#define FP_CLS_ZERO		1
+#define FP_CLS_INF		2
+#define FP_CLS_NAN		3
+
+#define _FP_CLS_COMBINE(x,y)	(((x) << 2) | (y))
+
+#include <math-emu/op-1.h>
+#include <math-emu/op-2.h>
+#include <math-emu/op-4.h>
+#include <math-emu/op-8.h>
+#include <math-emu/op-common.h>
+
+/* Sigh.  Silly things longlong.h needs.  */
+#define UWtype		_FP_W_TYPE
+#define W_TYPE_SIZE	_FP_W_TYPE_SIZE
+
+typedef int SItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef unsigned int UDItype __attribute__((mode(DI)));
+#if _FP_W_TYPE_SIZE == 32
+typedef unsigned int UHWtype __attribute__((mode(HI)));
+#elif _FP_W_TYPE_SIZE == 64
+typedef USItype UHWtype;
+#endif
+
+#ifndef umul_ppmm
+#include <stdlib/longlong.h>
+#endif
+
+#endif /* __MATH_EMU_SOFT_FP_H__ */
diff --git a/include/media/audiochip.h b/include/media/audiochip.h
new file mode 100644
index 000000000000..d3e9e30608dc
--- /dev/null
+++ b/include/media/audiochip.h
@@ -0,0 +1,35 @@
+#ifndef AUDIOCHIP_H
+#define AUDIOCHIP_H
+
+/* ---------------------------------------------------------------------- */
+
+/* v4l device was opened in Radio mode */
+#define AUDC_SET_RADIO        _IO('m',2)
+/* select from TV,radio,extern,MUTE */
+#define AUDC_SET_INPUT        _IOW('m',17,int)
+
+/* audio inputs */
+#define AUDIO_TUNER        0x00
+#define AUDIO_RADIO        0x01
+#define AUDIO_EXTERN       0x02
+#define AUDIO_INTERN       0x03
+#define AUDIO_OFF          0x04
+#define AUDIO_ON           0x05
+#define AUDIO_EXTERN_1     AUDIO_EXTERN
+#define AUDIO_EXTERN_2     0x06
+#define AUDIO_MUTE         0x80
+#define AUDIO_UNMUTE       0x81
+
+/* all the stuff below is obsolete and just here for reference.  I'll
+ * remove it once the driver is tested and works fine.
+ *
+ * Instead creating alot of tiny API's for all kinds of different
+ * chips, we'll just pass throuth the v4l ioctl structs (v4l2 not
+ * yet...).  It is a bit less flexible, but most/all used i2c chips
+ * make sense in v4l context only.  So I think that's acceptable...
+ */
+
+/* misc stuff to pass around config info to i2c chips */
+#define AUDC_CONFIG_PINNACLE  _IOW('m',32,int)
+
+#endif /* AUDIOCHIP_H */
diff --git a/include/media/id.h b/include/media/id.h
new file mode 100644
index 000000000000..1b0320dc8f73
--- /dev/null
+++ b/include/media/id.h
@@ -0,0 +1,37 @@
+/* FIXME: this temporarely, until these are included in linux/i2c-id.h */
+
+/* drivers */
+#ifndef  I2C_DRIVERID_TVMIXER
+# define I2C_DRIVERID_TVMIXER I2C_DRIVERID_EXP0
+#endif
+#ifndef  I2C_DRIVERID_TVAUDIO
+# define I2C_DRIVERID_TVAUDIO I2C_DRIVERID_EXP1
+#endif
+
+/* chips */
+#ifndef  I2C_DRIVERID_DPL3518
+# define I2C_DRIVERID_DPL3518 I2C_DRIVERID_EXP2
+#endif
+#ifndef  I2C_DRIVERID_TDA9873
+# define I2C_DRIVERID_TDA9873 I2C_DRIVERID_EXP3
+#endif
+#ifndef  I2C_DRIVERID_TDA9875
+# define I2C_DRIVERID_TDA9875 I2C_DRIVERID_EXP0+4
+#endif
+#ifndef  I2C_DRIVERID_PIC16C54_PV951
+# define I2C_DRIVERID_PIC16C54_PV951 I2C_DRIVERID_EXP0+5
+#endif
+#ifndef  I2C_DRIVERID_TDA7432
+# define I2C_DRIVERID_TDA7432 I2C_DRIVERID_EXP0+6
+#endif
+#ifndef  I2C_DRIVERID_TDA9874
+# define I2C_DRIVERID_TDA9874 I2C_DRIVERID_EXP0+7
+#endif
+#ifndef  I2C_DRIVERID_SAA6752HS
+# define I2C_DRIVERID_SAA6752HS I2C_DRIVERID_EXP0+8
+#endif
+
+/* algorithms */
+#ifndef I2C_ALGO_SAA7134
+# define I2C_ALGO_SAA7134 0x090000
+#endif
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
new file mode 100644
index 000000000000..62c963a52d86
--- /dev/null
+++ b/include/media/ir-common.h
@@ -0,0 +1,67 @@
+/*
+ * $Id: ir-common.h,v 1.8 2005/02/22 12:28:40 kraxel Exp $
+ *
+ * some common structs and functions to handle infrared remotes via
+ * input layer ...
+ *
+ * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/version.h>
+#include <linux/input.h>
+
+
+#define IR_TYPE_RC5     1
+#define IR_TYPE_OTHER  99
+
+#define IR_KEYTAB_TYPE	u32
+#define IR_KEYTAB_SIZE	128  // enougth for rc5, probably need more some day ...
+
+#define IR_KEYCODE(tab,code)	(((unsigned)code < IR_KEYTAB_SIZE) \
+				 ? tab[code] : KEY_RESERVED)
+
+struct ir_input_state {
+	/* configuration */
+	int                ir_type;
+	IR_KEYTAB_TYPE     ir_codes[IR_KEYTAB_SIZE];
+
+	/* key info */
+	u32                ir_raw;      /* raw data */
+	u32                ir_key;      /* ir key code */
+	u32                keycode;     /* linux key code */
+	int                keypressed;  /* current state */
+};
+
+extern IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE];
+
+void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
+		   int ir_type, IR_KEYTAB_TYPE *ir_codes);
+void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
+void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
+		      u32 ir_key, u32 ir_raw);
+u32  ir_extract_bits(u32 data, u32 mask);
+int  ir_dump_samples(u32 *samples, int count);
+int  ir_decode_biphase(u32 *samples, int count, int low, int high);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
new file mode 100644
index 000000000000..cb7c0aa96f22
--- /dev/null
+++ b/include/media/ovcamchip.h
@@ -0,0 +1,104 @@
+/* OmniVision* camera chip driver API
+ *
+ * Copyright (c) 1999-2004 Mark McClelland
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ *
+ * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
+ * is not sponsored or developed by them.
+ */
+
+#ifndef __LINUX_OVCAMCHIP_H
+#define __LINUX_OVCAMCHIP_H
+
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+
+/* Remove these once they are officially defined */
+#ifndef I2C_DRIVERID_OVCAMCHIP
+	#define I2C_DRIVERID_OVCAMCHIP	0xf00f
+#endif
+#ifndef I2C_HW_SMBUS_OV511
+	#define I2C_HW_SMBUS_OV511	0xfe
+#endif
+#ifndef I2C_HW_SMBUS_OV518
+	#define I2C_HW_SMBUS_OV518	0xff
+#endif
+#ifndef I2C_HW_SMBUS_OVFX2
+	#define I2C_HW_SMBUS_OVFX2	0xfd
+#endif
+
+/* --------------------------------- */
+/*           ENUMERATIONS            */
+/* --------------------------------- */
+
+/* Controls */
+enum {
+	OVCAMCHIP_CID_CONT,		/* Contrast */
+	OVCAMCHIP_CID_BRIGHT,		/* Brightness */
+	OVCAMCHIP_CID_SAT,		/* Saturation */
+	OVCAMCHIP_CID_HUE,		/* Hue */
+	OVCAMCHIP_CID_EXP,		/* Exposure */
+	OVCAMCHIP_CID_FREQ,		/* Light frequency */
+	OVCAMCHIP_CID_BANDFILT,		/* Banding filter */
+	OVCAMCHIP_CID_AUTOBRIGHT,	/* Auto brightness */
+	OVCAMCHIP_CID_AUTOEXP,		/* Auto exposure */
+	OVCAMCHIP_CID_BACKLIGHT,	/* Back light compensation */
+	OVCAMCHIP_CID_MIRROR,		/* Mirror horizontally */
+};
+
+/* Chip types */
+#define NUM_CC_TYPES	9
+enum {
+	CC_UNKNOWN,
+	CC_OV76BE,
+	CC_OV7610,
+	CC_OV7620,
+	CC_OV7620AE,
+	CC_OV6620,
+	CC_OV6630,
+	CC_OV6630AE,
+	CC_OV6630AF,
+};
+
+/* --------------------------------- */
+/*           I2C ADDRESSES           */
+/* --------------------------------- */
+
+#define OV7xx0_SID   (0x42 >> 1)
+#define OV6xx0_SID   (0xC0 >> 1)
+
+/* --------------------------------- */
+/*                API                */
+/* --------------------------------- */
+
+struct ovcamchip_control {
+	__u32 id;
+	__s32 value;
+};
+
+struct ovcamchip_window {
+	int x;
+	int y;
+	int width;
+	int height;
+	int format;
+	int quarter;		/* Scale width and height down 2x */
+
+	/* This stuff will be removed eventually */
+	int clockdiv;		/* Clock divisor setting */
+};
+
+/* Commands */
+#define OVCAMCHIP_CMD_Q_SUBTYPE     _IOR  (0x88, 0x00, int)
+#define OVCAMCHIP_CMD_INITIALIZE    _IOW  (0x88, 0x01, int)
+/* You must call OVCAMCHIP_CMD_INITIALIZE before any of commands below! */
+#define OVCAMCHIP_CMD_S_CTRL        _IOW  (0x88, 0x02, struct ovcamchip_control)
+#define OVCAMCHIP_CMD_G_CTRL        _IOWR (0x88, 0x03, struct ovcamchip_control)
+#define OVCAMCHIP_CMD_S_MODE        _IOW  (0x88, 0x04, struct ovcamchip_window)
+#define OVCAMCHIP_MAX_CMD           _IO   (0x88, 0x3f)
+
+#endif
diff --git a/include/media/saa6752hs.h b/include/media/saa6752hs.h
new file mode 100644
index 000000000000..791bad2b86e9
--- /dev/null
+++ b/include/media/saa6752hs.h
@@ -0,0 +1,75 @@
+/*
+    saa6752hs.h - definition for saa6752hs MPEG encoder
+
+    Copyright (C) 2003 Andrew de Quincey <adq@lidskialf.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#if 0 /* ndef _SAA6752HS_H */
+#define _SAA6752HS_H
+
+enum mpeg_video_bitrate_mode {
+	MPEG_VIDEO_BITRATE_MODE_VBR = 0, /* Variable bitrate */
+	MPEG_VIDEO_BITRATE_MODE_CBR = 1, /* Constant bitrate */
+
+	MPEG_VIDEO_BITRATE_MODE_MAX
+};
+
+enum mpeg_audio_bitrate {
+	MPEG_AUDIO_BITRATE_256 = 0, /* 256 kBit/sec */
+	MPEG_AUDIO_BITRATE_384 = 1, /* 384 kBit/sec */
+
+	MPEG_AUDIO_BITRATE_MAX
+};
+
+enum mpeg_video_format {
+	MPEG_VIDEO_FORMAT_D1 = 0,
+	MPEG_VIDEO_FORMAT_2_3_D1 = 1,
+	MPEG_VIDEO_FORMAT_1_2_D1 = 2,
+	MPEG_VIDEO_FORMAT_SIF = 3,
+
+	MPEG_VIDEO_FORMAT_MAX
+};
+
+#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
+#define MPEG_VIDEO_MAX_BITRATE_MAX 27000
+#define MPEG_TOTAL_BITRATE_MAX 27000
+#define MPEG_PID_MAX ((1 << 14) - 1)
+
+struct mpeg_params {
+	enum mpeg_video_bitrate_mode video_bitrate_mode;
+	unsigned int video_target_bitrate;
+	unsigned int video_max_bitrate; // only used for VBR
+	enum mpeg_audio_bitrate audio_bitrate;
+	unsigned int total_bitrate;
+
+   	unsigned int pmt_pid;
+	unsigned int video_pid;
+	unsigned int audio_pid;
+	unsigned int pcr_pid;
+
+	enum mpeg_video_format video_format;
+};
+
+#define MPEG_SETPARAMS             _IOW('6',100,struct mpeg_params)
+
+#endif // _SAA6752HS_H
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
new file mode 100644
index 000000000000..3dfb8d670eb7
--- /dev/null
+++ b/include/media/saa7146.h
@@ -0,0 +1,452 @@
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/version.h>	/* for version macros */
+#include <linux/module.h>	/* for module-version */
+#include <linux/delay.h>	/* for delay-stuff */
+#include <linux/slab.h>		/* for kmalloc/kfree */
+#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h>		/* for "__init" */
+#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
+#include <linux/kmod.h>		/* for kernel module loader */
+#include <linux/i2c.h>		/* for i2c subsystem */
+#include <asm/io.h>		/* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/vmalloc.h>	/* for vmalloc() */
+#include <linux/mm.h>		/* for vmalloc_to_page() */
+
+/* ugly, but necessary to build the dvb stuff under 2.4. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,51)
+	#include "dvb_functions.h"
+#endif
+
+#define SAA7146_VERSION_CODE KERNEL_VERSION(0,5,0)
+
+#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),__stringify(KBUILD_MODNAME),__FUNCTION__)
+
+#ifndef DEBUG_VARIABLE
+	#define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,51)
+#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_BASENAME),__FUNCTION__)
+#define INFO(x) { printk("%s: ",__stringify(KBUILD_BASENAME)); printk x; }
+#else
+#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_MODNAME),__FUNCTION__)
+#define INFO(x) { printk("%s: ",__stringify(KBUILD_MODNAME)); printk x; }
+#endif
+
+#define ERR(x) { DEBUG_PROLOG; printk x; }
+
+#define DEB_S(x)    if (0!=(DEBUG_VARIABLE&0x01)) { DEBUG_PROLOG; printk x; } /* simple debug messages */
+#define DEB_D(x)    if (0!=(DEBUG_VARIABLE&0x02)) { DEBUG_PROLOG; printk x; } /* more detailed debug messages */
+#define DEB_EE(x)   if (0!=(DEBUG_VARIABLE&0x04)) { DEBUG_PROLOG; printk x; } /* print enter and exit of functions */
+#define DEB_I2C(x)  if (0!=(DEBUG_VARIABLE&0x08)) { DEBUG_PROLOG; printk x; } /* i2c debug messages */
+#define DEB_VBI(x)  if (0!=(DEBUG_VARIABLE&0x10)) { DEBUG_PROLOG; printk x; } /* vbi debug messages */
+#define DEB_INT(x)  if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */
+#define DEB_CAP(x)  if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */
+
+#define SAA7146_IER_DISABLE(x,y) \
+	saa7146_write(x, IER, saa7146_read(x, IER) & ~(y));
+#define SAA7146_IER_ENABLE(x,y) \
+	saa7146_write(x, IER, saa7146_read(x, IER) | (y));
+#define SAA7146_ISR_CLEAR(x,y) \
+	saa7146_write(x, ISR, (y));
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+	unsigned int	size;
+	u32		*cpu;
+	dma_addr_t	dma;
+	/* used for offsets for u,v planes for planar capture modes */
+	unsigned long	offset;
+	/* used for custom pagetables (used for example by budget dvb cards) */
+	struct scatterlist *slist;
+};
+
+struct saa7146_pci_extension_data {
+	struct saa7146_extension *ext;
+	void *ext_priv;			/* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
+	{							\
+		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
+		.subvendor = x_vendor,				\
+		.subdevice = x_device,				\
+		.driver_data = (unsigned long)& x_var,		\
+	}
+
+struct saa7146_extension
+{
+	char	name[32];		/* name of the device */
+#define SAA7146_USE_I2C_IRQ	0x1
+#define SAA7146_I2C_SHORT_DELAY	0x2
+	int	flags;
+
+	/* pairs of subvendor and subdevice ids for
+	   supported devices, last entry 0xffff, 0xfff */
+	struct module *module;
+	struct pci_driver driver;
+	struct pci_device_id *pci_tbl;
+
+	/* extension functions */
+	int (*probe)(struct saa7146_dev *);
+	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+	int (*detach)(struct saa7146_dev*);
+
+	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
+	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+	dma_addr_t	dma_handle;
+	u32		*cpu_addr;
+};
+
+struct saa7146_dev
+{
+	struct module			*module;
+
+	struct list_head		item;
+
+	/* different device locks */
+	spinlock_t			slock;
+        struct semaphore		lock;
+
+	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
+	int				revision;	/* chip revision; needed for bug-workarounds*/
+
+	/* pci-device & irq stuff*/
+	char				name[32];
+	struct pci_dev			*pci;
+	u32				int_todo;
+	spinlock_t			int_slock;
+
+	/* extension handling */
+	struct saa7146_extension	*ext;		/* indicates if handled by extension */
+	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
+	struct saa7146_ext_vv		*ext_vv_data;
+
+	/* per device video/vbi informations (if available) */
+	struct saa7146_vv	*vv_data;
+	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+	/* i2c-stuff */
+        struct semaphore	i2c_lock;
+	u32			i2c_bitrate;
+	struct saa7146_dma	d_i2c;	/* pointer to i2c memory */
+	wait_queue_head_t	i2c_wq;
+	int			i2c_op;
+
+	/* memories */
+	struct saa7146_dma	d_rps0;
+	struct saa7146_dma	d_rps1;
+};
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+int saa7146_i2c_transfer(struct saa7146_dev *saa, const struct i2c_msg *msgs, int num, int retries);
+
+/* from saa7146_core.c */
+extern struct list_head saa7146_devices;
+extern struct semaphore saa7146_devices_lock;
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+char *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1    0x0000000800
+#define PV1    0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP		0x00000000  /* No operation */
+#define CMD_CLR_EVENT	0x00000000  /* Clear event */
+#define CMD_SET_EVENT	0x10000000  /* Set signal event */
+#define CMD_PAUSE	0x20000000  /* Pause */
+#define CMD_CHECK_LATE	0x30000000  /* Check late */
+#define CMD_UPLOAD	0x40000000  /* Upload */
+#define CMD_STOP	0x50000000  /* Stop */
+#define CMD_INTERRUPT	0x60000000  /* Interrupt */
+#define CMD_JUMP	0x80000000  /* Jump */
+#define CMD_WR_REG	0x90000000  /* Write (load) register */
+#define CMD_RD_REG	0xa0000000  /* Read (store) register */
+#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
+
+#define CMD_OAN		MASK_27
+#define CMD_INV		MASK_26
+#define CMD_SIG4	MASK_25
+#define CMD_SIG3	MASK_24
+#define CMD_SIG2	MASK_23
+#define CMD_SIG1	MASK_22
+#define CMD_SIG0	MASK_21
+#define CMD_O_FID_B	MASK_14
+#define CMD_E_FID_B	MASK_13
+#define CMD_O_FID_A	MASK_12
+#define CMD_E_FID_A	MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS          (1<<15)     // Source Line Threshold reached
+#define EVT_VBI_B       (1<<9)      // VSYNC Event
+#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
+#define RPS_INV         (1<<26)     // Invert (compound) event
+#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00   0x00000001    /* Mask value for bit 0 */
+#define MASK_01   0x00000002    /* Mask value for bit 1 */
+#define MASK_02   0x00000004    /* Mask value for bit 2 */
+#define MASK_03   0x00000008    /* Mask value for bit 3 */
+#define MASK_04   0x00000010    /* Mask value for bit 4 */
+#define MASK_05   0x00000020    /* Mask value for bit 5 */
+#define MASK_06   0x00000040    /* Mask value for bit 6 */
+#define MASK_07   0x00000080    /* Mask value for bit 7 */
+#define MASK_08   0x00000100    /* Mask value for bit 8 */
+#define MASK_09   0x00000200    /* Mask value for bit 9 */
+#define MASK_10   0x00000400    /* Mask value for bit 10 */
+#define MASK_11   0x00000800    /* Mask value for bit 11 */
+#define MASK_12   0x00001000    /* Mask value for bit 12 */
+#define MASK_13   0x00002000    /* Mask value for bit 13 */
+#define MASK_14   0x00004000    /* Mask value for bit 14 */
+#define MASK_15   0x00008000    /* Mask value for bit 15 */
+#define MASK_16   0x00010000    /* Mask value for bit 16 */
+#define MASK_17   0x00020000    /* Mask value for bit 17 */
+#define MASK_18   0x00040000    /* Mask value for bit 18 */
+#define MASK_19   0x00080000    /* Mask value for bit 19 */
+#define MASK_20   0x00100000    /* Mask value for bit 20 */
+#define MASK_21   0x00200000    /* Mask value for bit 21 */
+#define MASK_22   0x00400000    /* Mask value for bit 22 */
+#define MASK_23   0x00800000    /* Mask value for bit 23 */
+#define MASK_24   0x01000000    /* Mask value for bit 24 */
+#define MASK_25   0x02000000    /* Mask value for bit 25 */
+#define MASK_26   0x04000000    /* Mask value for bit 26 */
+#define MASK_27   0x08000000    /* Mask value for bit 27 */
+#define MASK_28   0x10000000    /* Mask value for bit 28 */
+#define MASK_29   0x20000000    /* Mask value for bit 29 */
+#define MASK_30   0x40000000    /* Mask value for bit 30 */
+#define MASK_31   0x80000000    /* Mask value for bit 31 */
+
+#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
+#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
+#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
+#define MASK_B3   0xff000000    /* Mask value for byte 3 */
+
+#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
+#define MASK_W1   0xffff0000    /* Mask value for word 1 */
+
+#define MASK_PA   0xfffffffc    /* Mask value for physical address */
+#define MASK_PR   0xfffffffe	/* Mask value for protection register */
+#define MASK_ER   0xffffffff    /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000    /* No mask */
+
+/* register aliases */
+#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
+#define BASE_EVEN1        0x04
+#define PROT_ADDR1        0x08
+#define PITCH1            0x0C
+#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1    0x14
+
+#define BASE_ODD2         0x18  /* Video DMA 2 registers */
+#define BASE_EVEN2        0x1C
+#define PROT_ADDR2        0x20
+#define PITCH2            0x24
+#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2    0x2C
+
+#define BASE_ODD3         0x30  /* Video DMA 3 registers */
+#define BASE_EVEN3        0x34
+#define PROT_ADDR3        0x38
+#define PITCH3            0x3C
+#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3    0x44
+
+#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
+#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
+#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
+#define PCI_BT_DEBI       0x4B  /* DEBI */
+#define PCI_BT_A          0x4C  /* Audio */
+
+#define DD1_INIT          0x50  /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
+#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
+
+#define BRS_CTRL          0x58  /* BRS control register */
+#define HPS_CTRL          0x5C  /* HPS control register */
+#define HPS_V_SCALE       0x60  /* HPS vertical scale */
+#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
+#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
+#define BCS_CTRL          0x70  /* BCS control */
+#define CHROMA_KEY_RANGE  0x74
+#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG       0x7C
+#define DEBI_COMMAND      0x80
+#define DEBI_PAGE         0x84
+#define DEBI_AD           0x88
+
+#define I2C_TRANSFER      0x8C
+#define I2C_STATUS        0x90
+
+#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
+#define PROT_A1_IN        0x98
+#define PAGE_A1_IN        0x9C
+
+#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
+#define PROT_A1_OUT       0xA4
+#define PAGE_A1_OUT       0xA8
+
+#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
+#define PROT_A2_IN        0xB0
+#define PAGE_A2_IN        0xB4
+
+#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
+#define PROT_A2_OUT       0xBC
+#define PAGE_A2_OUT       0xC0
+
+#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
+#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
+
+#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
+#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
+
+#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
+#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
+
+#define IER               0xDC  /* Interrupt enable register */
+
+#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
+
+#define EC1SSR            0xE4  /* Event cnt set 1 source select */
+#define EC2SSR            0xE8  /* Event cnt set 2 source select */
+#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
+#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
+
+#define ACON1             0xF4
+#define ACON2             0xF8
+
+#define MC1               0xFC   /* Main control register 1 */
+#define MC2               0x100  /* Main control register 2  */
+
+#define RPS_ADDR0         0x104  /* RPS task 0 address register */
+#define RPS_ADDR1         0x108  /* RPS task 1 address register */
+
+#define ISR               0x10C  /* Interrupt status register */
+#define PSR               0x110  /* Primary status register */
+#define SSR               0x114  /* Secondary status register */
+
+#define EC1R              0x118  /* Event counter set 1 register */
+#define EC2R              0x11C  /* Event counter set 2 register */
+
+#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
+
+#define LEVEL_REP         0x140,
+#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
+#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF       0x80000000  /* PCI parity error */
+#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
+#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
+#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
+#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
+#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
+#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
+#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
+#define SPCI_UPLD       0x00100000  /* RPS in upload */
+#define SPCI_DEBI_S     0x00080000  /* DEBI status */
+#define SPCI_DEBI_E     0x00040000  /* DEBI error */
+#define SPCI_IIC_S      0x00020000  /* I2C status */
+#define SPCI_IIC_E      0x00010000  /* I2C error */
+#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
+#define SPCI_V_PE       0x00000400  /* Video protection address */
+#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
+#define SPCI_FIDA       0x00000100  /* Field ID video port A */
+#define SPCI_FIDB       0x00000080  /* Field ID video port B */
+#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
+#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
+#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
+#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
+#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S       0x00000002  /* Event counter 3 */
+#define SPCI_EC0S       0x00000001  /* Event counter 0 */
+
+/* i2c */
+#define	SAA7146_I2C_ABORT	(1<<7)
+#define	SAA7146_I2C_SPERR	(1<<6)
+#define	SAA7146_I2C_APERR	(1<<5)
+#define	SAA7146_I2C_DTERR	(1<<4)
+#define	SAA7146_I2C_DRERR	(1<<3)
+#define	SAA7146_I2C_AL		(1<<2)
+#define	SAA7146_I2C_ERR		(1<<1)
+#define	SAA7146_I2C_BUSY	(1<<0)
+
+#define	SAA7146_I2C_START	(0x3)
+#define	SAA7146_I2C_CONT	(0x2)
+#define	SAA7146_I2C_STOP	(0x1)
+#define	SAA7146_I2C_NOP		(0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
+
+#endif
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
new file mode 100644
index 000000000000..f3aa24f8131c
--- /dev/null
+++ b/include/media/saa7146_vv.h
@@ -0,0 +1,270 @@
+#ifndef __SAA7146_VV__
+#define __SAA7146_VV__
+
+#include <linux/videodev2.h>
+
+#include <media/saa7146.h>
+#include <media/video-buf.h>
+
+#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
+#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+
+#define WRITE_RPS0(x) do { \
+	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+#define WRITE_RPS1(x) do { \
+	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+struct	saa7146_video_dma {
+	u32 base_odd;
+	u32 base_even;
+	u32 prot_addr;
+	u32 pitch;
+	u32 base_page;
+	u32 num_line_byte;
+};
+
+#define FORMAT_BYTE_SWAP	0x1
+#define FORMAT_IS_PLANAR	0x2
+
+struct saa7146_format {
+	char	*name;
+	u32	pixelformat;
+	u32	trans;
+	u8	depth;
+	u8	flags;
+	u8	swap;
+};
+
+struct saa7146_standard
+{
+	char          *name;
+	v4l2_std_id   id;
+
+	int v_offset;	/* number of lines of vertical offset before processing */
+	int v_field;	/* number of lines in a field for HPS to process */
+
+	int h_offset;	/* horizontal offset of processing window */
+	int h_pixels;	/* number of horizontal pixels to process */
+
+	int v_max_out;
+	int h_max_out;
+};
+
+/* buffer for one video/vbi frame */
+struct saa7146_buf {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* saa7146 specific */
+	struct v4l2_pix_format  *fmt;
+	int (*activate)(struct saa7146_dev *dev,
+			struct saa7146_buf *buf,
+			struct saa7146_buf *next);
+
+	/* page tables */
+	struct saa7146_pgtable  pt[3];
+};
+
+struct saa7146_dmaqueue {
+	struct saa7146_dev	*dev;
+	struct saa7146_buf	*curr;
+	struct list_head	queue;
+	struct timer_list	timeout;
+};
+
+struct saa7146_overlay {
+	struct saa7146_fh	*fh;
+	struct v4l2_window	win;
+	struct v4l2_clip	clips[16];
+	int			nclips;
+};
+
+/* per open data */
+struct saa7146_fh {
+	struct saa7146_dev	*dev;
+	/* if this is a vbi or capture open */
+	enum v4l2_buf_type	type;
+
+	/* video overlay */
+	struct saa7146_overlay	ov;
+
+	/* video capture */
+	struct videobuf_queue	video_q;
+	struct v4l2_pix_format	video_fmt;
+
+	/* vbi capture */
+	struct videobuf_queue	vbi_q;
+	struct v4l2_vbi_format	vbi_fmt;
+	struct timer_list	vbi_read_timeout;
+
+	unsigned int resources;	/* resource management for device open */
+};
+
+#define STATUS_OVERLAY	0x01
+#define STATUS_CAPTURE	0x02
+
+struct saa7146_vv
+{
+	int vbi_minor;
+
+	/* vbi capture */
+	struct saa7146_dmaqueue		vbi_q;
+	/* vbi workaround interrupt queue */
+        wait_queue_head_t		vbi_wq;
+	int				vbi_fieldcount;
+	struct saa7146_fh		*vbi_streaming;
+
+	int video_minor;
+
+	int				video_status;
+	struct saa7146_fh		*video_fh;
+
+	/* video overlay */
+	struct v4l2_framebuffer		ov_fb;
+	struct saa7146_format		*ov_fmt;
+	struct saa7146_overlay		*ov_data;
+	struct saa7146_fh		*ov_suspend;
+
+	/* video capture */
+	struct saa7146_dmaqueue		video_q;
+	enum v4l2_field			last_field;
+
+	/* common: fixme? shouldn't this be in saa7146_fh?
+	   (this leads to a more complicated question: shall the driver
+	   store the different settings (for example S_INPUT) for every open
+	   and restore it appropriately, or should all settings be common for
+	   all opens? currently, we do the latter, like all other
+	   drivers do... */
+	struct saa7146_standard	*standard;
+
+	int	vflip;
+	int	hflip;
+	int	current_hps_source;
+	int	current_hps_sync;
+
+	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
+
+	unsigned int resources;	/* resource management for device */
+};
+
+#define SAA7146_EXCLUSIVE	0x1
+#define SAA7146_BEFORE		0x2
+#define SAA7146_AFTER		0x4
+
+struct saa7146_extension_ioctls
+{
+	unsigned int	cmd;
+	int		flags;
+};
+
+/* flags */
+#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
+
+struct saa7146_ext_vv
+{
+	/* informations about the video capabilities of the device */
+	int	inputs;
+	int	audios;
+	u32	capabilities;
+	int	flags;
+
+	/* additionally supported transmission standards */
+	struct saa7146_standard *stds;
+	int num_stds;
+	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
+
+	struct saa7146_extension_ioctls *ioctls;
+	int (*ioctl)(struct saa7146_fh*, unsigned int cmd, void *arg);
+};
+
+struct saa7146_use_ops  {
+        void (*init)(struct saa7146_dev *, struct saa7146_vv *);
+        int(*open)(struct saa7146_dev *, struct file *);
+        void (*release)(struct saa7146_dev *, struct file *);
+        void (*irq_done)(struct saa7146_dev *, unsigned long status);
+	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
+};
+
+/* from saa7146_fops.c */
+int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, char *name, int type);
+int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev);
+void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
+void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
+int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
+void saa7146_buffer_timeout(unsigned long data);
+void saa7146_dma_free(struct saa7146_dev *dev,struct saa7146_buf *buf);
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
+int saa7146_vv_release(struct saa7146_dev* dev);
+
+/* from saa7146_hlp.c */
+int saa7146_enable_overlay(struct saa7146_fh *fh);
+void saa7146_disable_overlay(struct saa7146_fh *fh);
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
+void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
+
+/* from saa7146_video.c */
+extern struct saa7146_use_ops saa7146_video_uops;
+int saa7146_start_preview(struct saa7146_fh *fh);
+int saa7146_stop_preview(struct saa7146_fh *fh);
+
+/* from saa7146_vbi.c */
+extern struct saa7146_use_ops saa7146_vbi_uops;
+
+/* resource management functions */
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
+
+#define RESOURCE_DMA1_HPS	0x1
+#define RESOURCE_DMA2_CLP	0x2
+#define RESOURCE_DMA3_BRS	0x4
+
+/* saa7146 source inputs */
+#define SAA7146_HPS_SOURCE_PORT_A	0x00
+#define SAA7146_HPS_SOURCE_PORT_B	0x01
+#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
+#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
+
+/* sync inputs */
+#define SAA7146_HPS_SYNC_PORT_A		0x00
+#define SAA7146_HPS_SYNC_PORT_B		0x01
+
+/* some memory sizes */
+#define SAA7146_CLIPPING_MEM	(14*PAGE_SIZE)
+
+/* some defines for the various clipping-modes */
+#define SAA7146_CLIPPING_RECT		0x4
+#define SAA7146_CLIPPING_RECT_INVERTED	0x5
+#define SAA7146_CLIPPING_MASK		0x6
+#define SAA7146_CLIPPING_MASK_INVERTED	0x7
+
+/* output formats: each entry holds four informations */
+#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
+/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
+#define RGB15_COMPOSED	0x0213
+#define RGB16_COMPOSED	0x0210
+#define RGB24_COMPOSED	0x0201
+#define RGB32_COMPOSED	0x0202
+
+#define Y8			0x0006
+#define YUV411_COMPOSED		0x0003
+#define YUV422_COMPOSED		0x0000
+/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
+#define YUV411_DECOMPOSED	0x100b
+#define YUV422_DECOMPOSED	0x1009
+#define YUV420_DECOMPOSED	0x100a
+
+#define IS_PLANAR(x) (x & 0xf000)
+
+/* misc defines */
+#define SAA7146_NO_SWAP		(0x0)
+#define SAA7146_TWO_BYTE_SWAP	(0x1)
+#define SAA7146_FOUR_BYTE_SWAP	(0x2)
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
new file mode 100644
index 000000000000..156a9c51ffec
--- /dev/null
+++ b/include/media/tuner.h
@@ -0,0 +1,199 @@
+
+/*
+    tuner.h - definition for different tuners
+
+    Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
+    minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _TUNER_H
+#define _TUNER_H
+
+#include "id.h"
+
+#define TUNER_TEMIC_PAL     0        /* 4002 FH5 (3X 7756, 9483) */
+#define TUNER_PHILIPS_PAL_I 1
+#define TUNER_PHILIPS_NTSC  2
+#define TUNER_PHILIPS_SECAM 3		/* you must actively select B/G, L, L` */
+
+#define TUNER_ABSENT        4
+#define TUNER_PHILIPS_PAL   5
+#define TUNER_TEMIC_NTSC    6        /* 4032 FY5 (3X 7004, 9498, 9789)  */
+#define TUNER_TEMIC_PAL_I   7        /* 4062 FY5 (3X 8501, 9957)        */
+
+#define TUNER_TEMIC_4036FY5_NTSC 8   /* 4036 FY5 (3X 1223, 1981, 7686)  */
+#define TUNER_ALPS_TSBH1_NTSC 	 9
+#define TUNER_ALPS_TSBE1_PAL 	10
+#define TUNER_ALPS_TSBB5_PAL_I 	11
+
+#define TUNER_ALPS_TSBE5_PAL 	12
+#define TUNER_ALPS_TSBC5_PAL 	13
+#define TUNER_TEMIC_4006FH5_PAL	14   /* 4006 FH5 (3X 9500, 9501, 7291)     */
+#define TUNER_ALPS_TSHC6_NTSC 	15
+
+#define TUNER_TEMIC_PAL_DK	16   /* 4016 FY5 (3X 1392, 1393)     */
+#define TUNER_PHILIPS_NTSC_M	17
+#define TUNER_TEMIC_4066FY5_PAL_I       18  /* 4066 FY5 (3X 7032, 7035) */
+#define TUNER_TEMIC_4006FN5_MULTI_PAL   19  /* B/G, I and D/K autodetected (3X 7595, 7606, 7657)*/
+
+#define TUNER_TEMIC_4009FR5_PAL         20  /* incl. FM radio (3X 7607, 7488, 7711)*/
+#define TUNER_TEMIC_4039FR5_NTSC        21  /* incl. FM radio (3X 7246, 7578, 7732)*/
+#define TUNER_TEMIC_4046FM5             22  /* you must actively select B/G, D/K, I, L, L` !  (3X 7804, 7806, 8103, 8104)*/
+#define TUNER_PHILIPS_PAL_DK		23
+
+#define TUNER_PHILIPS_FQ1216ME		24  /* you must actively select B/G/D/K, I, L, L` */
+#define TUNER_LG_PAL_I_FM	25
+#define TUNER_LG_PAL_I		26
+#define TUNER_LG_NTSC_FM	27
+
+#define TUNER_LG_PAL_FM		28
+#define TUNER_LG_PAL		29
+#define TUNER_TEMIC_4009FN5_MULTI_PAL_FM	30  /* B/G, I and D/K autodetected (3X 8155, 8160, 8163)*/
+#define TUNER_SHARP_2U5JF5540_NTSC  31
+
+#define TUNER_Samsung_PAL_TCPM9091PD27 32
+#define TUNER_MT2032 33
+#define TUNER_TEMIC_4106FH5 	34	/* 4106 FH5 (3X 7808, 7865)*/
+#define TUNER_TEMIC_4012FY5	35	/* 4012 FY5 (3X 0971, 1099)*/
+
+#define TUNER_TEMIC_4136FY5	36	/* 4136 FY5 (3X 7708, 7746)*/
+#define TUNER_LG_PAL_NEW_TAPC   37
+#define TUNER_PHILIPS_FM1216ME_MK3  38
+#define TUNER_LG_NTSC_NEW_TAPC   39
+
+#define TUNER_HITACHI_NTSC       40
+#define TUNER_PHILIPS_PAL_MK     41
+#define TUNER_PHILIPS_ATSC       42
+#define TUNER_PHILIPS_FM1236_MK3 43
+
+#define TUNER_PHILIPS_4IN1       44	/* ATI TV Wonder Pro - Conexant */
+/* Microtune mergeged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
+#define TUNER_MICROTUNE_4049FM5  45
+#define TUNER_LG_NTSC_TAPE       47
+
+#define TUNER_TNF_8831BGFF       48
+#define TUNER_MICROTUNE_4042FI5  49	/* FusionHDTV 3 Gold - 4042 FI5 (3X 8147) */
+#define TUNER_TCL_2002N          50
+#define TUNER_PHILIPS_FM1256_IH3   51
+
+#define TUNER_THOMSON_DTT7610    52
+#define TUNER_PHILIPS_FQ1286     53
+#define TUNER_PHILIPS_TDA8290    54
+#define TUNER_LG_PAL_TAPE        55    /* Hauppauge PVR-150 PAL */
+
+#define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
+#define TUNER_PHILIPS_FQ1236A_MK4 57   /* Hauppauge PVR-500MCE NTSC */
+
+#define NOTUNER 0
+#define PAL     1	/* PAL_BG */
+#define PAL_I   2
+#define NTSC    3
+#define SECAM   4
+#define ATSC    5
+
+#define NoTuner 0
+#define Philips 1
+#define TEMIC   2
+#define Sony    3
+#define Alps    4
+#define LGINNOTEK 5
+#define SHARP   6
+#define Samsung 7
+#define Microtune 8
+#define HITACHI 9
+#define Panasonic 10
+#define TCL     11
+#define THOMSON 12
+
+#define TUNER_SET_TYPE               _IOW('t',1,int)    /* set tuner type */
+#define TUNER_SET_TVFREQ             _IOW('t',2,int)    /* set tv freq */
+
+#define  TDA9887_SET_CONFIG          _IOW('t',5,int)
+/* tv card specific */
+# define TDA9887_PRESENT             (1<<0)
+# define TDA9887_PORT1_INACTIVE      (1<<1)
+# define TDA9887_PORT2_INACTIVE      (1<<2)
+# define TDA9887_QSS                 (1<<3)
+# define TDA9887_INTERCARRIER        (1<<4)
+# define TDA9887_PORT1_ACTIVE        (1<<5)
+# define TDA9887_PORT2_ACTIVE        (1<<6)
+/* config options */
+# define TDA9887_DEEMPHASIS_MASK     (3<<16)
+# define TDA9887_DEEMPHASIS_NONE     (1<<16)
+# define TDA9887_DEEMPHASIS_50       (2<<16)
+# define TDA9887_DEEMPHASIS_75       (3<<16)
+# define TDA9887_AUTOMUTE            (1<<18)
+
+#ifdef __KERNEL__
+
+#define I2C_ADDR_TDA8290        0x4b
+#define I2C_ADDR_TDA8275        0x61
+
+struct tuner {
+	/* device */
+	struct i2c_client i2c;
+
+	/* state + config */
+	unsigned int initialized;
+	unsigned int type;            /* chip type */
+	unsigned int freq;            /* keep track of the current settings */
+	v4l2_std_id  std;
+	int          using_v4l2;
+
+	enum v4l2_tuner_type mode;
+	unsigned int input;
+
+	/* used by MT2032 */
+	unsigned int xogc;
+	unsigned int radio_if2;
+
+	/* used by tda8290 */
+	unsigned char i2c_easy_mode[2];
+	unsigned char i2c_set_freq[8];
+
+	/* function ptrs */
+	void (*tv_freq)(struct i2c_client *c, unsigned int freq);
+	void (*radio_freq)(struct i2c_client *c, unsigned int freq);
+	int  (*has_signal)(struct i2c_client *c);
+	int  (*is_stereo)(struct i2c_client *c);
+};
+
+extern unsigned int tuner_debug;
+extern unsigned const int tuner_count;
+
+extern int microtune_init(struct i2c_client *c);
+extern int tda8290_init(struct i2c_client *c);
+extern int default_tuner_init(struct i2c_client *c);
+
+#define tuner_warn(fmt, arg...) \
+	dev_printk(KERN_WARNING , &t->i2c.dev , fmt , ## arg)
+#define tuner_info(fmt, arg...) \
+	dev_printk(KERN_INFO , &t->i2c.dev , fmt , ## arg)
+#define tuner_dbg(fmt, arg...) \
+	if (tuner_debug) dev_printk(KERN_DEBUG , &t->i2c.dev , fmt , ## arg)
+
+#endif /* __KERNEL__ */
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
new file mode 100644
index 000000000000..627603e561a6
--- /dev/null
+++ b/include/media/tveeprom.h
@@ -0,0 +1,23 @@
+struct tveeprom {
+	u32 has_radio;
+
+	u32 tuner_type;
+	u32 tuner_formats;
+
+	u32 digitizer;
+	u32 digitizer_formats;
+
+	u32 audio_processor;
+	/* a_p_fmts? */
+
+	u32 model;
+	u32 revision;
+	u32 serial_number;
+	char rev_str[5];
+};
+
+void tveeprom_hauppauge_analog(struct tveeprom *tvee,
+			       unsigned char *eeprom_data);
+
+int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len);
+int tveeprom_dump(unsigned char *eedata, int len);
diff --git a/include/media/video-buf-dvb.h b/include/media/video-buf-dvb.h
new file mode 100644
index 000000000000..94bd33619aa5
--- /dev/null
+++ b/include/media/video-buf-dvb.h
@@ -0,0 +1,36 @@
+#include <dvbdev.h>
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvb_net.h>
+#include <dvb_frontend.h>
+
+struct videobuf_dvb {
+	/* filling that the job of the driver */
+	char                       *name;
+	struct dvb_frontend        *frontend;
+	struct videobuf_queue      dvbq;
+
+	/* video-buf-dvb state info */
+	struct semaphore           lock;
+	struct task_struct         *thread;
+	int                        nfeeds;
+
+	/* videobuf_dvb_(un)register manges this */
+	struct dvb_adapter         *adapter;
+	struct dvb_demux           demux;
+	struct dmxdev              dmxdev;
+	struct dmx_frontend        fe_hw;
+	struct dmx_frontend        fe_mem;
+	struct dvb_net             net;
+};
+
+int videobuf_dvb_register(struct videobuf_dvb *dvb,
+			  struct module *module,
+			  void *adapter_priv);
+void videobuf_dvb_unregister(struct videobuf_dvb *dvb);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/video-buf.h b/include/media/video-buf.h
new file mode 100644
index 000000000000..ae6da6de98de
--- /dev/null
+++ b/include/media/video-buf.h
@@ -0,0 +1,260 @@
+/*
+ * $Id: video-buf.h,v 1.9 2004/11/07 13:17:15 kraxel Exp $
+ *
+ * generic helper functions for video4linux capture buffers, to handle
+ * memory management and PCI DMA.  Right now bttv + saa7134 use it.
+ *
+ * The functions expect the hardware being able to scatter gatter
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks).  They also assume the driver does not need
+ * to touch the video data (thus it is probably not useful for USB as
+ * data often must be uncompressed by the drivers).
+ *
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/videodev.h>
+
+#define UNSET (-1U)
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * Return a scatterlist for some page-aligned vmalloc()'ed memory
+ * block (NULL on errors).  Memory for the scatterlist is allocated
+ * using kmalloc.  The caller must free the memory.
+ */
+struct scatterlist* videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages);
+
+/*
+ * Return a scatterlist for a an array of userpages (NULL on errors).
+ * Memory for the scatterlist is allocated using kmalloc.  The caller
+ * must free the memory.
+ */
+struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages,
+					 int offset);
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage buffers (both userland
+ * and kernel) for DMA.
+ *
+ * videobuf_dma_init_*()
+ *	creates a buffer.  The userland version takes a userspace
+ *	pointer + length.  The kernel version just wants the size and
+ *	does memory allocation too using vmalloc_32().
+ *
+ * videobuf_dma_pci_*()
+ *	see Documentation/DMA-mapping.txt, these functions to
+ *	basically the same.  The map function does also build a
+ *	scatterlist for the buffer (and unmap frees it ...)
+ *
+ * videobuf_dma_free()
+ *	no comment ...
+ *
+ */
+
+struct videobuf_dmabuf {
+	u32                 magic;
+
+	/* for userland buffer */
+	int                 offset;
+	struct page         **pages;
+
+	/* for kernel buffers */
+	void                *vmalloc;
+
+	/* for overlay buffers (pci-pci dma) */
+	dma_addr_t          bus_addr;
+
+	/* common */
+	struct scatterlist  *sglist;
+	int                 sglen;
+	int                 nr_pages;
+	int                 direction;
+};
+
+void videobuf_dma_init(struct videobuf_dmabuf *dma);
+int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
+			   unsigned long data, unsigned long size);
+int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
+			     int nr_pages);
+int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
+			      dma_addr_t addr, int nr_pages);
+int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma);
+int videobuf_dma_pci_sync(struct pci_dev *dev,
+			  struct videobuf_dmabuf *dma);
+int videobuf_dma_pci_unmap(struct pci_dev *dev, struct videobuf_dmabuf *dma);
+int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage video4linux buffers.
+ *
+ * struct videobuf_buffer holds the data structures used by the helper
+ * functions, additionally some commonly used fields for v4l buffers
+ * (width, height, lists, waitqueue) are in there.  That struct should
+ * be used as first element in the drivers buffer struct.
+ *
+ * about the mmap helpers (videobuf_mmap_*):
+ *
+ * The mmaper function allows to map any subset of contingous buffers.
+ * This includes one mmap() call for all buffers (which the original
+ * video4linux API uses) as well as one mmap() for every single buffer
+ * (which v4l2 uses).
+ *
+ * If there is a valid mapping for a buffer, buffer->baddr/bsize holds
+ * userspace address + size which can be feeded into the
+ * videobuf_dma_init_user function listed above.
+ *
+ */
+
+struct videobuf_buffer;
+struct videobuf_queue;
+
+struct videobuf_mapping {
+	unsigned int count;
+	unsigned long start;
+	unsigned long end;
+	struct videobuf_queue *q;
+};
+
+enum videobuf_state {
+	STATE_NEEDS_INIT = 0,
+	STATE_PREPARED   = 1,
+	STATE_QUEUED     = 2,
+	STATE_ACTIVE     = 3,
+	STATE_DONE       = 4,
+	STATE_ERROR      = 5,
+	STATE_IDLE       = 6,
+};
+
+struct videobuf_buffer {
+	unsigned int            i;
+	u32                     magic;
+
+	/* info about the buffer */
+	unsigned int            width;
+	unsigned int            height;
+	unsigned int            bytesperline; /* use only if != 0 */
+	unsigned long           size;
+	unsigned int            input;
+	enum v4l2_field         field;
+	enum videobuf_state     state;
+	struct videobuf_dmabuf  dma;
+	struct list_head        stream;  /* QBUF/DQBUF list */
+
+	/* for mmap'ed buffers */
+	enum v4l2_memory        memory;
+	size_t                  boff;    /* buffer offset (mmap + overlay) */
+	size_t                  bsize;   /* buffer size */
+	unsigned long           baddr;   /* buffer addr (userland ptr!) */
+	struct videobuf_mapping *map;
+
+	/* touched by irq handler */
+	struct list_head        queue;
+	wait_queue_head_t       done;
+	unsigned int            field_count;
+	struct timeval          ts;
+};
+
+struct videobuf_queue_ops {
+	int (*buf_setup)(struct videobuf_queue *q,
+			 unsigned int *count, unsigned int *size);
+	int (*buf_prepare)(struct videobuf_queue *q,
+			   struct videobuf_buffer *vb,
+			   enum v4l2_field field);
+	void (*buf_queue)(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb);
+	void (*buf_release)(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb);
+};
+
+struct videobuf_queue {
+        struct semaphore           lock;
+	spinlock_t                 *irqlock;
+	struct pci_dev             *pci;
+
+	enum v4l2_buf_type         type;
+	unsigned int               inputs; /* for V4L2_BUF_FLAG_INPUT */
+	unsigned int               msize;
+	enum v4l2_field            field;
+	enum v4l2_field            last;   /* for field=V4L2_FIELD_ALTERNATE */
+	struct videobuf_buffer     *bufs[VIDEO_MAX_FRAME];
+	struct videobuf_queue_ops  *ops;
+
+	/* capture via mmap() + ioctl(QBUF/DQBUF) */
+	unsigned int               streaming;
+	struct list_head           stream;
+
+	/* capture via read() */
+	unsigned int               reading;
+	unsigned int               read_off;
+	struct videobuf_buffer     *read_buf;
+
+	/* driver private data */
+	void                       *priv_data;
+};
+
+void* videobuf_alloc(unsigned int size);
+int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+int videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb,
+		    struct v4l2_framebuffer *fbuf);
+
+void videobuf_queue_init(struct videobuf_queue *q,
+			 struct videobuf_queue_ops *ops,
+			 struct pci_dev *pci,
+			 spinlock_t *irqlock,
+			 enum v4l2_buf_type type,
+			 enum v4l2_field field,
+			 unsigned int msize,
+			 void *priv);
+int  videobuf_queue_is_busy(struct videobuf_queue *q);
+void videobuf_queue_cancel(struct videobuf_queue *q);
+
+enum v4l2_field videobuf_next_field(struct videobuf_queue *q);
+void videobuf_status(struct v4l2_buffer *b, struct videobuf_buffer *vb,
+		     enum v4l2_buf_type type);
+int videobuf_reqbufs(struct videobuf_queue *q,
+		     struct v4l2_requestbuffers *req);
+int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+int videobuf_qbuf(struct videobuf_queue *q,
+		  struct v4l2_buffer *b);
+int videobuf_dqbuf(struct videobuf_queue *q,
+		   struct v4l2_buffer *b, int nonblocking);
+int videobuf_streamon(struct videobuf_queue *q);
+int videobuf_streamoff(struct videobuf_queue *q);
+
+int videobuf_read_start(struct videobuf_queue *q);
+void videobuf_read_stop(struct videobuf_queue *q);
+ssize_t videobuf_read_stream(struct videobuf_queue *q,
+			     char __user *data, size_t count, loff_t *ppos,
+			     int vbihack, int nonblocking);
+ssize_t videobuf_read_one(struct videobuf_queue *q,
+			  char __user *data, size_t count, loff_t *ppos,
+			  int nonblocking);
+unsigned int videobuf_poll_stream(struct file *file,
+				  struct videobuf_queue *q,
+				  poll_table *wait);
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+			unsigned int bcount, unsigned int bsize,
+			enum v4l2_memory memory);
+int videobuf_mmap_free(struct videobuf_queue *q);
+int videobuf_mmap_mapper(struct videobuf_queue *q,
+			 struct vm_area_struct *vma);
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
new file mode 100644
index 000000000000..bda4f2c8f728
--- /dev/null
+++ b/include/mtd/inftl-user.h
@@ -0,0 +1,91 @@
+/*
+ * $Id: inftl-user.h,v 1.1 2004/05/05 15:17:00 dwmw2 Exp $
+ *
+ * Parts of INFTL headers shared with userspace 
+ *
+ */
+
+#ifndef __MTD_INFTL_USER_H__
+#define __MTD_INFTL_USER_H__
+
+#define	OSAK_VERSION	0x5120
+#define	PERCENTUSED	98
+
+#define	SECTORSIZE	512
+
+/* Block Control Information */
+
+struct inftl_bci {
+	uint8_t ECCsig[6];
+	uint8_t Status;
+	uint8_t Status1;
+} __attribute__((packed));
+
+struct inftl_unithead1 {
+	uint16_t virtualUnitNo;
+	uint16_t prevUnitNo;
+	uint8_t ANAC;
+	uint8_t NACs;
+	uint8_t parityPerField;
+	uint8_t discarded;
+} __attribute__((packed));
+
+struct inftl_unithead2 {
+	uint8_t parityPerField;
+	uint8_t ANAC;
+	uint16_t prevUnitNo;
+	uint16_t virtualUnitNo;
+	uint8_t NACs;
+	uint8_t discarded;
+} __attribute__((packed));
+
+struct inftl_unittail {
+	uint8_t Reserved[4];
+	uint16_t EraseMark;
+	uint16_t EraseMark1;
+} __attribute__((packed));
+
+union inftl_uci {
+	struct inftl_unithead1 a;
+	struct inftl_unithead2 b;
+	struct inftl_unittail c;
+};
+
+struct inftl_oob {
+	struct inftl_bci b;
+	union inftl_uci u;
+};
+
+
+/* INFTL Media Header */
+
+struct INFTLPartition {
+	__u32 virtualUnits;
+	__u32 firstUnit;
+	__u32 lastUnit;
+	__u32 flags;
+	__u32 spareUnits;
+	__u32 Reserved0;
+	__u32 Reserved1;
+} __attribute__((packed));
+
+struct INFTLMediaHeader {
+	char bootRecordID[8];
+	__u32 NoOfBootImageBlocks;
+	__u32 NoOfBinaryPartitions;
+	__u32 NoOfBDTLPartitions;
+	__u32 BlockMultiplierBits;
+	__u32 FormatFlags;
+	__u32 OsakVersion;
+	__u32 PercentUsed;
+	struct INFTLPartition Partitions[4];
+} __attribute__((packed));
+
+/* Partition flag types */
+#define	INFTL_BINARY	0x20000000
+#define	INFTL_BDTL	0x40000000
+#define	INFTL_LAST	0x80000000
+
+#endif /* __MTD_INFTL_USER_H__ */
+
+
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
new file mode 100644
index 000000000000..d508ef0ae091
--- /dev/null
+++ b/include/mtd/jffs2-user.h
@@ -0,0 +1,35 @@
+/*
+ * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
+ *
+ * JFFS2 definitions for use in user space only
+ */
+
+#ifndef __JFFS2_USER_H__
+#define __JFFS2_USER_H__
+
+/* This file is blessed for inclusion by userspace */
+#include <linux/jffs2.h>
+#include <endian.h>
+#include <byteswap.h>
+
+#undef cpu_to_je16
+#undef cpu_to_je32
+#undef cpu_to_jemode
+#undef je16_to_cpu
+#undef je32_to_cpu
+#undef jemode_to_cpu
+
+extern int target_endian;
+
+#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
+#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
+
+#define cpu_to_je16(x) ((jint16_t){t16(x)})
+#define cpu_to_je32(x) ((jint32_t){t32(x)})
+#define cpu_to_jemode(x) ((jmode_t){t32(x)})
+
+#define je16_to_cpu(x) (t16((x).v16))
+#define je32_to_cpu(x) (t32((x).v32))
+#define jemode_to_cpu(x) (t32((x).m))
+
+#endif /* __JFFS2_USER_H__ */
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
new file mode 100644
index 000000000000..a76ab898f445
--- /dev/null
+++ b/include/mtd/mtd-abi.h
@@ -0,0 +1,103 @@
+/*
+ * $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $
+ *
+ * Portions of MTD ABI definition which are shared by kernel and user space 
+ */
+
+#ifndef __MTD_ABI_H__
+#define __MTD_ABI_H__
+
+#ifndef __KERNEL__ /* Urgh. The whole point of splitting this out into
+		    separate files was to avoid #ifdef __KERNEL__ */
+#define __user
+#endif
+
+struct erase_info_user {
+	uint32_t start;
+	uint32_t length;
+};
+
+struct mtd_oob_buf {
+	uint32_t start;
+	uint32_t length;
+	unsigned char __user *ptr;
+};
+
+#define MTD_ABSENT		0
+#define MTD_RAM			1
+#define MTD_ROM			2
+#define MTD_NORFLASH		3
+#define MTD_NANDFLASH		4
+#define MTD_PEROM		5
+#define MTD_OTHER		14
+#define MTD_UNKNOWN		15
+
+#define MTD_CLEAR_BITS		1       // Bits can be cleared (flash)
+#define MTD_SET_BITS		2       // Bits can be set
+#define MTD_ERASEABLE		4       // Has an erase function
+#define MTD_WRITEB_WRITEABLE	8       // Direct IO is possible
+#define MTD_VOLATILE		16      // Set for RAMs
+#define MTD_XIP			32	// eXecute-In-Place possible
+#define MTD_OOB			64	// Out-of-band data (NAND flash)
+#define MTD_ECC			128	// Device capable of automatic ECC
+#define MTD_NO_VIRTBLOCKS	256	// Virtual blocks not allowed
+
+// Some common devices / combinations of capabilities
+#define MTD_CAP_ROM		0
+#define MTD_CAP_RAM		(MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
+#define MTD_CAP_NORFLASH        (MTD_CLEAR_BITS|MTD_ERASEABLE)
+#define MTD_CAP_NANDFLASH       (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
+#define MTD_WRITEABLE		(MTD_CLEAR_BITS|MTD_SET_BITS)
+
+
+// Types of automatic ECC/Checksum available
+#define MTD_ECC_NONE		0 	// No automatic ECC available
+#define MTD_ECC_RS_DiskOnChip	1	// Automatic ECC on DiskOnChip
+#define MTD_ECC_SW		2	// SW ECC for Toshiba & Samsung devices
+
+/* ECC byte placement */
+#define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY	3	// Use the given placement in the structure (Do not store ecc result on read)
+
+struct mtd_info_user {
+	uint8_t type;
+	uint32_t flags;
+	uint32_t size;	 // Total size of the MTD
+	uint32_t erasesize;
+	uint32_t oobblock;  // Size of OOB blocks (e.g. 512)
+	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	uint32_t ecctype;
+	uint32_t eccsize;
+};
+
+struct region_info_user {
+	uint32_t offset;		/* At which this region starts, 
+					 * from the beginning of the MTD */
+	uint32_t erasesize;		/* For this region */
+	uint32_t numblocks;		/* Number of blocks in this region */
+	uint32_t regionindex;
+};
+
+#define MEMGETINFO              _IOR('M', 1, struct mtd_info_user)
+#define MEMERASE                _IOW('M', 2, struct erase_info_user)
+#define MEMWRITEOOB             _IOWR('M', 3, struct mtd_oob_buf)
+#define MEMREADOOB              _IOWR('M', 4, struct mtd_oob_buf)
+#define MEMLOCK                 _IOW('M', 5, struct erase_info_user)
+#define MEMUNLOCK               _IOW('M', 6, struct erase_info_user)
+#define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+#define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
+#define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
+#define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
+#define MEMGETBADBLOCK		_IOW('M', 11, loff_t)
+#define MEMSETBADBLOCK		_IOW('M', 12, loff_t)
+
+struct nand_oobinfo {
+	uint32_t useecc;
+	uint32_t eccbytes;
+	uint32_t oobfree[8][2];
+	uint32_t eccpos[32];
+};
+
+#endif /* __MTD_ABI_H__ */
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
new file mode 100644
index 000000000000..1c13fc7161fe
--- /dev/null
+++ b/include/mtd/mtd-user.h
@@ -0,0 +1,20 @@
+/*
+ * $Id: mtd-user.h,v 1.2 2004/05/05 14:44:57 dwmw2 Exp $
+ *
+ * MTD ABI header for use by user space only.
+ */
+
+#ifndef __MTD_USER_H__
+#define __MTD_USER_H__
+
+#include <stdint.h>
+
+/* This file is blessed for inclusion by userspace */
+#include <mtd/mtd-abi.h>
+
+typedef struct mtd_info_user mtd_info_t;
+typedef struct erase_info_user erase_info_t;
+typedef struct region_info_user region_info_t;
+typedef struct nand_oobinfo nand_oobinfo_t;
+
+#endif /* __MTD_USER_H__ */
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
new file mode 100644
index 000000000000..924ec0459e9c
--- /dev/null
+++ b/include/mtd/nftl-user.h
@@ -0,0 +1,76 @@
+/*
+ * $Id: nftl-user.h,v 1.1 2004/05/05 14:44:57 dwmw2 Exp $
+ *
+ * Parts of NFTL headers shared with userspace 
+ *
+ */
+
+#ifndef __MTD_NFTL_USER_H__
+#define __MTD_NFTL_USER_H__
+
+/* Block Control Information */
+
+struct nftl_bci {
+	unsigned char ECCSig[6];
+	uint8_t Status;
+	uint8_t Status1;
+}__attribute__((packed));
+
+/* Unit Control Information */
+
+struct nftl_uci0 {
+	uint16_t VirtUnitNum;
+	uint16_t ReplUnitNum;
+	uint16_t SpareVirtUnitNum;
+	uint16_t SpareReplUnitNum;
+} __attribute__((packed));
+
+struct nftl_uci1 {
+	uint32_t WearInfo;
+	uint16_t EraseMark;
+	uint16_t EraseMark1;
+} __attribute__((packed));
+
+struct nftl_uci2 {
+        uint16_t FoldMark;
+        uint16_t FoldMark1;
+	uint32_t unused;
+} __attribute__((packed));
+
+union nftl_uci {
+	struct nftl_uci0 a;
+	struct nftl_uci1 b;
+	struct nftl_uci2 c;
+};
+
+struct nftl_oob {
+	struct nftl_bci b;
+	union nftl_uci u;
+};
+
+/* NFTL Media Header */
+
+struct NFTLMediaHeader {
+	char DataOrgID[6];
+	uint16_t NumEraseUnits;
+	uint16_t FirstPhysicalEUN;
+	uint32_t FormattedSize;
+	unsigned char UnitSizeFactor;
+} __attribute__((packed));
+
+#define MAX_ERASE_ZONES (8192 - 512)
+
+#define ERASE_MARK 0x3c69
+#define SECTOR_FREE 0xff
+#define SECTOR_USED 0x55
+#define SECTOR_IGNORE 0x11
+#define SECTOR_DELETED 0x00
+
+#define FOLD_MARK_IN_PROGRESS 0x5555
+
+#define ZONE_GOOD 0xff
+#define ZONE_BAD_ORIGINAL 0
+#define ZONE_BAD_MARKED 7
+
+
+#endif /* __MTD_NFTL_USER_H__ */
diff --git a/include/net/act_api.h b/include/net/act_api.h
new file mode 100644
index 000000000000..ed00a995f576
--- /dev/null
+++ b/include/net/act_api.h
@@ -0,0 +1,116 @@
+#ifndef __NET_ACT_API_H
+#define __NET_ACT_API_H
+
+/*
+ * Public police action API for classifiers/qdiscs
+ */
+
+#include <net/sch_generic.h>
+#include <net/pkt_sched.h>
+
+#define tca_gen(name) \
+struct tcf_##name *next; \
+	u32 index; \
+	int refcnt; \
+	int bindcnt; \
+	u32 capab; \
+	int action; \
+	struct tcf_t tm; \
+	struct gnet_stats_basic bstats; \
+	struct gnet_stats_queue qstats; \
+	struct gnet_stats_rate_est rate_est; \
+	spinlock_t *stats_lock; \
+	spinlock_t lock
+
+struct tcf_police
+{
+	tca_gen(police);
+	int		result;
+	u32		ewma_rate;
+	u32		burst;
+	u32		mtu;
+	u32		toks;
+	u32		ptoks;
+	psched_time_t	t_c;
+	struct qdisc_rate_table *R_tab;
+	struct qdisc_rate_table *P_tab;
+};
+
+#ifdef CONFIG_NET_CLS_ACT
+
+#define ACT_P_CREATED 1
+#define ACT_P_DELETED 1
+
+struct tcf_act_hdr
+{
+	tca_gen(act_hdr);
+};
+
+struct tc_action
+{
+	void *priv;
+	struct tc_action_ops *ops;
+	__u32   type;   /* for backward compat(TCA_OLD_COMPAT) */
+	__u32   order; 
+	struct tc_action *next;
+};
+
+#define TCA_CAP_NONE 0
+struct tc_action_ops
+{
+	struct tc_action_ops *next;
+	char    kind[IFNAMSIZ];
+	__u32   type; /* TBD to match kind */
+	__u32 	capab;  /* capabilities includes 4 bit version */
+	struct module		*owner;
+	int     (*act)(struct sk_buff **, struct tc_action *);
+	int     (*get_stats)(struct sk_buff *, struct tc_action *);
+	int     (*dump)(struct sk_buff *, struct tc_action *,int , int);
+	int     (*cleanup)(struct tc_action *, int bind);
+	int     (*lookup)(struct tc_action *, u32 );
+	int     (*init)(struct rtattr *,struct rtattr *,struct tc_action *, int , int );
+	int     (*walk)(struct sk_buff *, struct netlink_callback *, int , struct tc_action *);
+};
+
+extern int tcf_register_action(struct tc_action_ops *a);
+extern int tcf_unregister_action(struct tc_action_ops *a);
+extern void tcf_action_destroy(struct tc_action *a, int bind);
+extern int tcf_action_exec(struct sk_buff *skb, struct tc_action *a, struct tcf_result *res);
+extern struct tc_action *tcf_action_init(struct rtattr *rta, struct rtattr *est, char *n, int ovr, int bind, int *err);
+extern struct tc_action *tcf_action_init_1(struct rtattr *rta, struct rtattr *est, char *n, int ovr, int bind, int *err);
+extern int tcf_action_dump(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_dump_old(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_dump_1(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_copy_stats (struct sk_buff *,struct tc_action *, int);
+#endif /* CONFIG_NET_CLS_ACT */
+
+extern int tcf_police(struct sk_buff *skb, struct tcf_police *p);
+extern void tcf_police_destroy(struct tcf_police *p);
+extern struct tcf_police * tcf_police_locate(struct rtattr *rta, struct rtattr *est);
+extern int tcf_police_dump(struct sk_buff *skb, struct tcf_police *p);
+extern int tcf_police_dump_stats(struct sk_buff *skb, struct tcf_police *p);
+
+static inline int
+tcf_police_release(struct tcf_police *p, int bind)
+{
+	int ret = 0;
+#ifdef CONFIG_NET_CLS_ACT
+	if (p) {
+		if (bind) {
+			 p->bindcnt--;
+		}
+		p->refcnt--;
+		if (p->refcnt <= 0 && !p->bindcnt) {
+			tcf_police_destroy(p);
+			ret = 1;
+		}
+	}
+#else
+	if (p && --p->refcnt == 0)
+		tcf_police_destroy(p);
+
+#endif /* CONFIG_NET_CLS_ACT */
+	return ret;
+}
+
+#endif
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
new file mode 100644
index 000000000000..7af9a13cb9be
--- /dev/null
+++ b/include/net/addrconf.h
@@ -0,0 +1,240 @@
+#ifndef _ADDRCONF_H
+#define _ADDRCONF_H
+
+#define RETRANS_TIMER	HZ
+
+#define MAX_RTR_SOLICITATIONS		3
+#define RTR_SOLICITATION_INTERVAL	(4*HZ)
+
+#define MIN_VALID_LIFETIME		(2*3600)	/* 2 hours */
+
+#define TEMP_VALID_LIFETIME		(7*86400)
+#define TEMP_PREFERRED_LIFETIME		(86400)
+#define REGEN_MAX_RETRY			(5)
+#define MAX_DESYNC_FACTOR		(600)
+
+#define ADDR_CHECK_FREQUENCY		(120*HZ)
+
+#define IPV6_MAX_ADDRESSES		16
+
+struct prefix_info {
+	__u8			type;
+	__u8			length;
+	__u8			prefix_len;
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8			onlink : 1,
+			 	autoconf : 1,
+				reserved : 6;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			reserved : 6,
+				autoconf : 1,
+				onlink : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u32			valid;
+	__u32			prefered;
+	__u32			reserved2;
+
+	struct in6_addr		prefix;
+};
+
+
+#ifdef __KERNEL__
+
+#include <linux/in6.h>
+#include <linux/netdevice.h>
+#include <net/if_inet6.h>
+
+#define IN6_ADDR_HSIZE		16
+
+extern int			addrconf_init(void);
+extern void			addrconf_cleanup(void);
+
+extern int			addrconf_add_ifaddr(void __user *arg);
+extern int			addrconf_del_ifaddr(void __user *arg);
+extern int			addrconf_set_dstaddr(void __user *arg);
+
+extern int			ipv6_chk_addr(struct in6_addr *addr,
+					      struct net_device *dev,
+					      int strict);
+extern struct inet6_ifaddr *	ipv6_get_ifaddr(struct in6_addr *addr,
+						struct net_device *dev,
+						int strict);
+extern int			ipv6_get_saddr(struct dst_entry *dst, 
+					       struct in6_addr *daddr,
+					       struct in6_addr *saddr);
+extern int			ipv6_dev_get_saddr(struct net_device *dev, 
+					       struct in6_addr *daddr,
+					       struct in6_addr *saddr);
+extern int			ipv6_get_lladdr(struct net_device *dev, struct in6_addr *);
+extern int			ipv6_rcv_saddr_equal(const struct sock *sk, 
+						      const struct sock *sk2);
+extern void			addrconf_join_solict(struct net_device *dev,
+					struct in6_addr *addr);
+extern void			addrconf_leave_solict(struct inet6_dev *idev,
+					struct in6_addr *addr);
+
+/*
+ *	multicast prototypes (mcast.c)
+ */
+extern int ipv6_sock_mc_join(struct sock *sk, int ifindex, 
+		  struct in6_addr *addr);
+extern int ipv6_sock_mc_drop(struct sock *sk, int ifindex, 
+		  struct in6_addr *addr);
+extern void ipv6_sock_mc_close(struct sock *sk);
+extern int inet6_mc_check(struct sock *sk, struct in6_addr *mc_addr,
+		struct in6_addr *src_addr);
+
+extern int ipv6_dev_mc_inc(struct net_device *dev, struct in6_addr *addr);
+extern int __ipv6_dev_mc_dec(struct inet6_dev *idev, struct in6_addr *addr);
+extern int ipv6_dev_mc_dec(struct net_device *dev, struct in6_addr *addr);
+extern void ipv6_mc_up(struct inet6_dev *idev);
+extern void ipv6_mc_down(struct inet6_dev *idev);
+extern void ipv6_mc_init_dev(struct inet6_dev *idev);
+extern void ipv6_mc_destroy_dev(struct inet6_dev *idev);
+extern void addrconf_dad_failure(struct inet6_ifaddr *ifp);
+
+extern int ipv6_chk_mcast_addr(struct net_device *dev, struct in6_addr *group,
+		struct in6_addr *src_addr);
+extern int ipv6_is_mld(struct sk_buff *skb, int nexthdr);
+
+extern void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len);
+
+extern int ipv6_get_hoplimit(struct net_device *dev);
+
+/*
+ *	anycast prototypes (anycast.c)
+ */
+extern int ipv6_sock_ac_join(struct sock *sk,int ifindex,struct in6_addr *addr);
+extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex,struct in6_addr *addr);
+extern void ipv6_sock_ac_close(struct sock *sk);
+extern int inet6_ac_check(struct sock *sk, struct in6_addr *addr, int ifindex);
+
+extern int ipv6_dev_ac_inc(struct net_device *dev, struct in6_addr *addr);
+extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr);
+extern int ipv6_chk_acast_addr(struct net_device *dev, struct in6_addr *addr);
+
+
+/* Device notifier */
+extern int register_inet6addr_notifier(struct notifier_block *nb);
+extern int unregister_inet6addr_notifier(struct notifier_block *nb);
+
+static inline struct inet6_dev *
+__in6_dev_get(struct net_device *dev)
+{
+	return (struct inet6_dev *)dev->ip6_ptr;
+}
+
+extern rwlock_t addrconf_lock;
+
+static inline struct inet6_dev *
+in6_dev_get(struct net_device *dev)
+{
+	struct inet6_dev *idev = NULL;
+	read_lock(&addrconf_lock);
+	idev = dev->ip6_ptr;
+	if (idev)
+		atomic_inc(&idev->refcnt);
+	read_unlock(&addrconf_lock);
+	return idev;
+}
+
+extern void in6_dev_finish_destroy(struct inet6_dev *idev);
+
+static inline void
+in6_dev_put(struct inet6_dev *idev)
+{
+	if (atomic_dec_and_test(&idev->refcnt))
+		in6_dev_finish_destroy(idev);
+}
+
+#define __in6_dev_put(idev)  atomic_dec(&(idev)->refcnt)
+#define in6_dev_hold(idev)   atomic_inc(&(idev)->refcnt)
+
+
+extern void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp);
+
+static inline void in6_ifa_put(struct inet6_ifaddr *ifp)
+{
+	if (atomic_dec_and_test(&ifp->refcnt))
+		inet6_ifa_finish_destroy(ifp);
+}
+
+#define __in6_ifa_put(ifp)	atomic_dec(&(ifp)->refcnt)
+#define in6_ifa_hold(ifp)	atomic_inc(&(ifp)->refcnt)
+
+
+extern void			addrconf_forwarding_on(void);
+/*
+ *	Hash function taken from net_alias.c
+ */
+
+static __inline__ u8 ipv6_addr_hash(const struct in6_addr *addr)
+{	
+	__u32 word;
+
+	/* 
+	 * We perform the hash function over the last 64 bits of the address
+	 * This will include the IEEE address token on links that support it.
+	 */
+
+	word = addr->s6_addr32[2] ^ addr->s6_addr32[3];
+	word ^= (word >> 16);
+	word ^= (word >> 8);
+
+	return ((word ^ (word >> 4)) & 0x0f);
+}
+
+/*
+ *	compute link-local solicited-node multicast address
+ */
+
+static inline void addrconf_addr_solict_mult(const struct in6_addr *addr,
+					     struct in6_addr *solicited)
+{
+	ipv6_addr_set(solicited,
+		      __constant_htonl(0xFF020000), 0,
+		      __constant_htonl(0x1),
+		      __constant_htonl(0xFF000000) | addr->s6_addr32[3]);
+}
+
+
+static inline void ipv6_addr_all_nodes(struct in6_addr *addr)
+{
+	ipv6_addr_set(addr,
+		      __constant_htonl(0xFF020000), 0, 0,
+		      __constant_htonl(0x1));
+}
+
+static inline void ipv6_addr_all_routers(struct in6_addr *addr)
+{
+	ipv6_addr_set(addr,
+		      __constant_htonl(0xFF020000), 0, 0,
+		      __constant_htonl(0x2));
+}
+
+static inline int ipv6_addr_is_multicast(const struct in6_addr *addr)
+{
+	return (addr->s6_addr32[0] & __constant_htonl(0xFF000000)) == __constant_htonl(0xFF000000);
+}
+
+static inline int ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr)
+{
+	return (addr->s6_addr32[0] == htonl(0xff020000) &&
+		addr->s6_addr32[1] == 0 &&
+		addr->s6_addr32[2] == 0 &&
+		addr->s6_addr32[3] == htonl(0x00000001));
+}
+
+static inline int ipv6_addr_is_ll_all_routers(const struct in6_addr *addr)
+{
+	return (addr->s6_addr32[0] == htonl(0xff020000) &&
+		addr->s6_addr32[1] == 0 &&
+		addr->s6_addr32[2] == 0 &&
+		addr->s6_addr32[3] == htonl(0x00000002));
+}
+
+#endif
+#endif
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
new file mode 100644
index 000000000000..b60b3846b9d1
--- /dev/null
+++ b/include/net/af_unix.h
@@ -0,0 +1,78 @@
+#ifndef __LINUX_NET_AFUNIX_H
+#define __LINUX_NET_AFUNIX_H
+extern void unix_inflight(struct file *fp);
+extern void unix_notinflight(struct file *fp);
+extern void unix_gc(void);
+
+#define UNIX_HASH_SIZE	256
+
+extern struct hlist_head unix_socket_table[UNIX_HASH_SIZE + 1];
+extern rwlock_t unix_table_lock;
+
+extern atomic_t unix_tot_inflight;
+
+static inline struct sock *first_unix_socket(int *i)
+{
+	for (*i = 0; *i <= UNIX_HASH_SIZE; (*i)++) {
+		if (!hlist_empty(&unix_socket_table[*i]))
+			return __sk_head(&unix_socket_table[*i]);
+	}
+	return NULL;
+}
+
+static inline struct sock *next_unix_socket(int *i, struct sock *s)
+{
+	struct sock *next = sk_next(s);
+	/* More in this chain? */
+	if (next)
+		return next;
+	/* Look for next non-empty chain. */
+	for ((*i)++; *i <= UNIX_HASH_SIZE; (*i)++) {
+		if (!hlist_empty(&unix_socket_table[*i]))
+			return __sk_head(&unix_socket_table[*i]);
+	}
+	return NULL;
+}
+
+#define forall_unix_sockets(i, s) \
+	for (s = first_unix_socket(&(i)); s; s = next_unix_socket(&(i),(s)))
+
+struct unix_address {
+	atomic_t	refcnt;
+	int		len;
+	unsigned	hash;
+	struct sockaddr_un name[0];
+};
+
+struct unix_skb_parms {
+	struct ucred		creds;		/* Skb credentials	*/
+	struct scm_fp_list	*fp;		/* Passed files		*/
+};
+
+#define UNIXCB(skb) 	(*(struct unix_skb_parms*)&((skb)->cb))
+#define UNIXCREDS(skb)	(&UNIXCB((skb)).creds)
+
+#define unix_state_rlock(s)	read_lock(&unix_sk(s)->lock)
+#define unix_state_runlock(s)	read_unlock(&unix_sk(s)->lock)
+#define unix_state_wlock(s)	write_lock(&unix_sk(s)->lock)
+#define unix_state_wunlock(s)	write_unlock(&unix_sk(s)->lock)
+
+#ifdef __KERNEL__
+/* The AF_UNIX socket */
+struct unix_sock {
+	/* WARNING: sk has to be the first member */
+	struct sock		sk;
+        struct unix_address     *addr;
+        struct dentry		*dentry;
+        struct vfsmount		*mnt;
+        struct semaphore        readsem;
+        struct sock		*peer;
+        struct sock		*other;
+        struct sock		*gc_tree;
+        atomic_t                inflight;
+        rwlock_t                lock;
+        wait_queue_head_t       peer_wait;
+};
+#define unix_sk(__sk) ((struct unix_sock *)__sk)
+#endif
+#endif
diff --git a/include/net/ah.h b/include/net/ah.h
new file mode 100644
index 000000000000..ceff00afae09
--- /dev/null
+++ b/include/net/ah.h
@@ -0,0 +1,35 @@
+#ifndef _NET_AH_H
+#define _NET_AH_H
+
+#include <net/xfrm.h>
+
+/* This is the maximum truncated ICV length that we know of. */
+#define MAX_AH_AUTH_LEN	12
+
+struct ah_data
+{
+	u8			*key;
+	int			key_len;
+	u8			*work_icv;
+	int			icv_full_len;
+	int			icv_trunc_len;
+
+	void			(*icv)(struct ah_data*,
+	                               struct sk_buff *skb, u8 *icv);
+
+	struct crypto_tfm	*tfm;
+};
+
+static inline void
+ah_hmac_digest(struct ah_data *ahp, struct sk_buff *skb, u8 *auth_data)
+{
+	struct crypto_tfm *tfm = ahp->tfm;
+
+	memset(auth_data, 0, ahp->icv_trunc_len);
+	crypto_hmac_init(tfm, ahp->key, &ahp->key_len);
+	skb_icv_walk(skb, tfm, 0, skb->len, crypto_hmac_update);
+	crypto_hmac_final(tfm, ahp->key, &ahp->key_len, ahp->work_icv);
+	memcpy(auth_data, ahp->work_icv, ahp->icv_trunc_len);
+}
+
+#endif
diff --git a/include/net/arp.h b/include/net/arp.h
new file mode 100644
index 000000000000..a1f09fad6a52
--- /dev/null
+++ b/include/net/arp.h
@@ -0,0 +1,32 @@
+/* linux/net/inet/arp.h */
+#ifndef _ARP_H
+#define _ARP_H
+
+#include <linux/if_arp.h>
+#include <net/neighbour.h>
+
+#define HAVE_ARP_CREATE
+
+extern struct neigh_table arp_tbl;
+
+extern void	arp_init(void);
+extern int	arp_rcv(struct sk_buff *skb, struct net_device *dev,
+			struct packet_type *pt);
+extern int	arp_find(unsigned char *haddr, struct sk_buff *skb);
+extern int	arp_ioctl(unsigned int cmd, void __user *arg);
+extern void     arp_send(int type, int ptype, u32 dest_ip, 
+			 struct net_device *dev, u32 src_ip, 
+			 unsigned char *dest_hw, unsigned char *src_hw, unsigned char *th);
+extern int	arp_bind_neighbour(struct dst_entry *dst);
+extern int	arp_mc_map(u32 addr, u8 *haddr, struct net_device *dev, int dir);
+extern void	arp_ifdown(struct net_device *dev);
+
+extern struct sk_buff *arp_create(int type, int ptype, u32 dest_ip,
+				  struct net_device *dev, u32 src_ip,
+				  unsigned char *dest_hw, unsigned char *src_hw,
+				  unsigned char *target_hw);
+extern void arp_xmit(struct sk_buff *skb);
+
+extern struct neigh_ops arp_broken_ops;
+
+#endif	/* _ARP_H */
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
new file mode 100644
index 000000000000..47048b1d179a
--- /dev/null
+++ b/include/net/atmclip.h
@@ -0,0 +1,62 @@
+/* net/atm/atmarp.h - RFC1577 ATM ARP */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+ 
+#ifndef _ATMCLIP_H
+#define _ATMCLIP_H
+
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/atmarp.h>
+#include <linux/spinlock.h>
+#include <net/neighbour.h>
+
+
+#define CLIP_VCC(vcc) ((struct clip_vcc *) ((vcc)->user_back))
+#define NEIGH2ENTRY(neigh) ((struct atmarp_entry *) (neigh)->primary_key)
+
+
+struct clip_vcc {
+	struct atm_vcc	*vcc;		/* VCC descriptor */
+	struct atmarp_entry *entry;	/* ATMARP table entry, NULL if IP addr.
+					   isn't known yet */
+	int		xoff;		/* 1 if send buffer is full */
+	unsigned char	encap;		/* 0: NULL, 1: LLC/SNAP */
+	unsigned long	last_use;	/* last send or receive operation */
+	unsigned long	idle_timeout;	/* keep open idle for so many jiffies*/
+	void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
+					/* keep old push fn for chaining */
+	void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb);
+					/* keep old pop fn for chaining */
+	struct clip_vcc	*next;		/* next VCC */
+};
+
+
+struct atmarp_entry {
+	u32		ip;		/* IP address */
+	struct clip_vcc	*vccs;		/* active VCCs; NULL if resolution is
+					   pending */
+	unsigned long	expires;	/* entry expiration time */
+	struct neighbour *neigh;	/* neighbour back-pointer */
+};
+
+
+#define PRIV(dev) ((struct clip_priv *) netdev_priv(dev))
+
+
+struct clip_priv {
+	int number;			/* for convenience ... */
+	spinlock_t xoff_lock;		/* ensures that pop is atomic (SMP) */
+	struct net_device_stats stats;
+	struct net_device *next;	/* next CLIP interface */
+};
+
+
+#ifdef __KERNEL__
+extern struct neigh_table *clip_tbl_hook;
+#endif
+
+#endif
diff --git a/include/net/ax25.h b/include/net/ax25.h
new file mode 100644
index 000000000000..fb95ecb6fe03
--- /dev/null
+++ b/include/net/ax25.h
@@ -0,0 +1,385 @@
+/*
+ *	Declarations of AX.25 type objects.
+ *
+ *	Alan Cox (GW4PTS) 	10/11/93
+ */
+#ifndef _AX25_H
+#define _AX25_H 
+
+#include <linux/config.h>
+#include <linux/ax25.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <asm/atomic.h>
+
+#define	AX25_T1CLAMPLO  		1
+#define	AX25_T1CLAMPHI 			(30 * HZ)
+
+#define	AX25_BPQ_HEADER_LEN		16
+#define	AX25_KISS_HEADER_LEN		1
+
+#define	AX25_HEADER_LEN			17
+#define	AX25_ADDR_LEN			7
+#define	AX25_DIGI_HEADER_LEN		(AX25_MAX_DIGIS * AX25_ADDR_LEN)
+#define	AX25_MAX_HEADER_LEN		(AX25_HEADER_LEN + AX25_DIGI_HEADER_LEN)
+
+/* AX.25 Protocol IDs */
+#define AX25_P_ROSE			0x01
+#define AX25_P_IP			0xCC
+#define AX25_P_ARP			0xCD
+#define AX25_P_TEXT 			0xF0
+#define AX25_P_NETROM 			0xCF
+#define	AX25_P_SEGMENT			0x08
+
+/* AX.25 Segment control values */
+#define	AX25_SEG_REM			0x7F
+#define	AX25_SEG_FIRST			0x80
+
+#define AX25_CBIT			0x80	/* Command/Response bit */
+#define AX25_EBIT			0x01	/* HDLC Address Extension bit */
+#define AX25_HBIT			0x80	/* Has been repeated bit */
+
+#define AX25_SSSID_SPARE		0x60	/* Unused bits in SSID for standard AX.25 */
+#define AX25_ESSID_SPARE		0x20	/* Unused bits in SSID for extended AX.25 */
+#define AX25_DAMA_FLAG			0x20	/* Well, it is *NOT* unused! (dl1bke 951121 */
+
+#define	AX25_COND_ACK_PENDING		0x01
+#define	AX25_COND_REJECT		0x02
+#define	AX25_COND_PEER_RX_BUSY		0x04
+#define	AX25_COND_OWN_RX_BUSY		0x08
+#define	AX25_COND_DAMA_MODE		0x10
+
+#ifndef _LINUX_NETDEVICE_H
+#include <linux/netdevice.h>
+#endif
+
+/* Upper sub-layer (LAPB) definitions */
+
+/* Control field templates */
+#define	AX25_I			0x00	/* Information frames */
+#define	AX25_S			0x01	/* Supervisory frames */
+#define	AX25_RR			0x01	/* Receiver ready */
+#define	AX25_RNR		0x05	/* Receiver not ready */
+#define	AX25_REJ		0x09	/* Reject */
+#define	AX25_U			0x03	/* Unnumbered frames */
+#define	AX25_SABM		0x2f	/* Set Asynchronous Balanced Mode */
+#define	AX25_SABME		0x6f	/* Set Asynchronous Balanced Mode Extended */
+#define	AX25_DISC		0x43	/* Disconnect */
+#define	AX25_DM			0x0f	/* Disconnected mode */
+#define	AX25_UA			0x63	/* Unnumbered acknowledge */
+#define	AX25_FRMR		0x87	/* Frame reject */
+#define	AX25_UI			0x03	/* Unnumbered information */
+#define	AX25_XID		0xaf	/* Exchange information */
+#define	AX25_TEST		0xe3	/* Test */
+
+#define	AX25_PF			0x10	/* Poll/final bit for standard AX.25 */
+#define	AX25_EPF		0x01	/* Poll/final bit for extended AX.25 */
+
+#define AX25_ILLEGAL		0x100	/* Impossible to be a real frame type */
+
+#define	AX25_POLLOFF		0
+#define	AX25_POLLON		1
+
+/* AX25 L2 C-bit */
+#define AX25_COMMAND		1
+#define AX25_RESPONSE		2
+
+/* Define Link State constants. */
+
+enum { 
+	AX25_STATE_0,
+	AX25_STATE_1,
+	AX25_STATE_2,
+	AX25_STATE_3,
+	AX25_STATE_4
+};
+
+#define AX25_MODULUS 		8	/*  Standard AX.25 modulus */
+#define	AX25_EMODULUS		128	/*  Extended AX.25 modulus */
+
+enum {
+	AX25_PROTO_STD_SIMPLEX,
+	AX25_PROTO_STD_DUPLEX,
+	AX25_PROTO_DAMA_SLAVE,
+	AX25_PROTO_DAMA_MASTER
+};
+
+enum {
+	AX25_VALUES_IPDEFMODE,	/* 0=DG 1=VC */
+	AX25_VALUES_AXDEFMODE,	/* 0=Normal 1=Extended Seq Nos */
+	AX25_VALUES_BACKOFF,	/* 0=None 1=Linear 2=Exponential */
+	AX25_VALUES_CONMODE,	/* Allow connected modes - 0=No 1=no "PID text" 2=all PIDs */
+	AX25_VALUES_WINDOW,	/* Default window size for standard AX.25 */
+	AX25_VALUES_EWINDOW,	/* Default window size for extended AX.25 */
+	AX25_VALUES_T1,		/* Default T1 timeout value */
+	AX25_VALUES_T2,		/* Default T2 timeout value */
+	AX25_VALUES_T3,		/* Default T3 timeout value */
+	AX25_VALUES_IDLE,	/* Connected mode idle timer */
+	AX25_VALUES_N2,		/* Default N2 value */
+	AX25_VALUES_PACLEN,	/* AX.25 MTU */
+	AX25_VALUES_PROTOCOL,	/* Std AX.25, DAMA Slave, DAMA Master */
+	AX25_VALUES_DS_TIMEOUT,	/* DAMA Slave timeout */
+	AX25_MAX_VALUES		/* THIS MUST REMAIN THE LAST ENTRY OF THIS LIST */
+};
+
+#define	AX25_DEF_IPDEFMODE	0			/* Datagram */
+#define	AX25_DEF_AXDEFMODE	0			/* Normal */
+#define	AX25_DEF_BACKOFF	1			/* Linear backoff */
+#define	AX25_DEF_CONMODE	2			/* Connected mode allowed */
+#define	AX25_DEF_WINDOW		2			/* Window=2 */
+#define	AX25_DEF_EWINDOW	32			/* Module-128 Window=32 */
+#define	AX25_DEF_T1		(10 * HZ)		/* T1=10s */
+#define	AX25_DEF_T2		(3 * HZ)		/* T2=3s  */
+#define	AX25_DEF_T3		(300 * HZ)		/* T3=300s */
+#define	AX25_DEF_N2		10			/* N2=10 */
+#define AX25_DEF_IDLE		(0 * 60 * HZ)		/* Idle=None */
+#define AX25_DEF_PACLEN		256			/* Paclen=256 */
+#define	AX25_DEF_PROTOCOL	AX25_PROTO_STD_SIMPLEX	/* Standard AX.25 */
+#define AX25_DEF_DS_TIMEOUT	(3 * 60 * HZ)		/* DAMA timeout 3 minutes */
+
+typedef struct ax25_uid_assoc {
+	struct ax25_uid_assoc	*next;
+	uid_t			uid;
+	ax25_address		call;
+} ax25_uid_assoc;
+
+typedef struct {
+	ax25_address		calls[AX25_MAX_DIGIS];
+	unsigned char		repeated[AX25_MAX_DIGIS];
+	unsigned char		ndigi;
+	char			lastrepeat;
+} ax25_digi;
+
+typedef struct ax25_route {
+	struct ax25_route	*next;
+	atomic_t		ref;
+	ax25_address		callsign;
+	struct net_device	*dev;
+	ax25_digi		*digipeat;
+	char			ip_mode;
+	struct timer_list	timer;
+} ax25_route;
+
+typedef struct {
+	char			slave;			/* slave_mode?   */
+	struct timer_list	slave_timer;		/* timeout timer */
+	unsigned short		slave_timeout;		/* when? */
+} ax25_dama_info;
+
+struct ctl_table;
+
+typedef struct ax25_dev {
+	struct ax25_dev		*next;
+	struct net_device	*dev;
+	struct net_device	*forward;
+	struct ctl_table	*systable;
+	int			values[AX25_MAX_VALUES];
+#if defined(CONFIG_AX25_DAMA_SLAVE) || defined(CONFIG_AX25_DAMA_MASTER)
+	ax25_dama_info		dama;
+#endif
+} ax25_dev;
+
+typedef struct ax25_cb {
+	struct hlist_node	ax25_node;
+	ax25_address		source_addr, dest_addr;
+	ax25_digi		*digipeat;
+	ax25_dev		*ax25_dev;
+	unsigned char		iamdigi;
+	unsigned char		state, modulus, pidincl;
+	unsigned short		vs, vr, va;
+	unsigned char		condition, backoff;
+	unsigned char		n2, n2count;
+	struct timer_list	t1timer, t2timer, t3timer, idletimer;
+	unsigned long		t1, t2, t3, idle, rtt;
+	unsigned short		paclen, fragno, fraglen;
+	struct sk_buff_head	write_queue;
+	struct sk_buff_head	reseq_queue;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	frag_queue;
+	unsigned char		window;
+	struct timer_list	timer, dtimer;
+	struct sock		*sk;		/* Backlink to socket */
+	atomic_t		refcount;
+} ax25_cb;
+
+#define ax25_sk(__sk) ((ax25_cb *)(__sk)->sk_protinfo)
+
+#define ax25_for_each(__ax25, node, list) \
+	hlist_for_each_entry(__ax25, node, list, ax25_node)
+
+#define ax25_cb_hold(__ax25) \
+	atomic_inc(&((__ax25)->refcount))
+
+static __inline__ void ax25_cb_put(ax25_cb *ax25)
+{
+	if (atomic_dec_and_test(&ax25->refcount)) {
+		if (ax25->digipeat)
+			kfree(ax25->digipeat);
+		kfree(ax25);
+	}
+}
+
+/* af_ax25.c */
+extern struct hlist_head ax25_list;
+extern spinlock_t ax25_list_lock;
+extern void ax25_cb_add(ax25_cb *);
+struct sock *ax25_find_listener(ax25_address *, int, struct net_device *, int);
+struct sock *ax25_get_socket(ax25_address *, ax25_address *, int);
+extern ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
+extern void ax25_send_to_raw(ax25_address *, struct sk_buff *, int);
+extern void ax25_destroy_socket(ax25_cb *);
+extern ax25_cb *ax25_create_cb(void);
+extern void ax25_fillin_cb(ax25_cb *, ax25_dev *);
+extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
+
+/* ax25_addr.c */
+extern ax25_address null_ax25_address;
+extern char *ax2asc(ax25_address *);
+extern ax25_address *asc2ax(char *);
+extern int  ax25cmp(ax25_address *, ax25_address *);
+extern int  ax25digicmp(ax25_digi *, ax25_digi *);
+extern unsigned char *ax25_addr_parse(unsigned char *, int, ax25_address *, ax25_address *, ax25_digi *, int *, int *);
+extern int  ax25_addr_build(unsigned char *, ax25_address *, ax25_address *, ax25_digi *, int, int);
+extern int  ax25_addr_size(ax25_digi *);
+extern void ax25_digi_invert(ax25_digi *, ax25_digi *);
+
+/* ax25_dev.c */
+extern ax25_dev *ax25_dev_list;
+extern spinlock_t ax25_dev_lock;
+
+static inline ax25_dev *ax25_dev_ax25dev(struct net_device *dev)
+{
+	return dev->ax25_ptr;
+}
+
+extern ax25_dev *ax25_addr_ax25dev(ax25_address *);
+extern void ax25_dev_device_up(struct net_device *);
+extern void ax25_dev_device_down(struct net_device *);
+extern int  ax25_fwd_ioctl(unsigned int, struct ax25_fwd_struct *);
+extern struct net_device *ax25_fwd_dev(struct net_device *);
+extern void ax25_dev_free(void);
+
+/* ax25_ds_in.c */
+extern int  ax25_ds_frame_in(ax25_cb *, struct sk_buff *, int);
+
+/* ax25_ds_subr.c */
+extern void ax25_ds_nr_error_recovery(ax25_cb *);
+extern void ax25_ds_enquiry_response(ax25_cb *);
+extern void ax25_ds_establish_data_link(ax25_cb *);
+extern void ax25_dev_dama_off(ax25_dev *);
+extern void ax25_dama_on(ax25_cb *);
+extern void ax25_dama_off(ax25_cb *);
+
+/* ax25_ds_timer.c */
+extern void ax25_ds_set_timer(ax25_dev *);
+extern void ax25_ds_del_timer(ax25_dev *);
+extern void ax25_ds_timer(ax25_cb *);
+extern void ax25_ds_t1_timeout(ax25_cb *);
+extern void ax25_ds_heartbeat_expiry(ax25_cb *);
+extern void ax25_ds_t3timer_expiry(ax25_cb *);
+extern void ax25_ds_idletimer_expiry(ax25_cb *);
+
+/* ax25_iface.c */
+extern int  ax25_protocol_register(unsigned int, int (*)(struct sk_buff *, ax25_cb *));
+extern void ax25_protocol_release(unsigned int);
+extern int  ax25_linkfail_register(void (*)(ax25_cb *, int));
+extern void ax25_linkfail_release(void (*)(ax25_cb *, int));
+extern int  ax25_listen_register(ax25_address *, struct net_device *);
+extern void ax25_listen_release(ax25_address *, struct net_device *);
+extern int  (*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *);
+extern int  ax25_listen_mine(ax25_address *, struct net_device *);
+extern void ax25_link_failed(ax25_cb *, int);
+extern int  ax25_protocol_is_registered(unsigned int);
+
+/* ax25_in.c */
+extern int  ax25_rx_iframe(ax25_cb *, struct sk_buff *);
+extern int  ax25_kiss_rcv(struct sk_buff *, struct net_device *, struct packet_type *);
+
+/* ax25_ip.c */
+extern int  ax25_encapsulate(struct sk_buff *, struct net_device *, unsigned short, void *, void *, unsigned int);
+extern int  ax25_rebuild_header(struct sk_buff *);
+
+/* ax25_out.c */
+extern ax25_cb *ax25_send_frame(struct sk_buff *, int, ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
+extern void ax25_output(ax25_cb *, int, struct sk_buff *);
+extern void ax25_kick(ax25_cb *);
+extern void ax25_transmit_buffer(ax25_cb *, struct sk_buff *, int);
+extern void ax25_queue_xmit(struct sk_buff *);
+extern int  ax25_check_iframes_acked(ax25_cb *, unsigned short);
+
+/* ax25_route.c */
+extern void ax25_rt_device_down(struct net_device *);
+extern int  ax25_rt_ioctl(unsigned int, void __user *);
+extern struct file_operations ax25_route_fops;
+extern int  ax25_rt_autobind(ax25_cb *, ax25_address *);
+extern ax25_route *ax25_rt_find_route(ax25_route *, ax25_address *,
+	struct net_device *);
+extern struct sk_buff *ax25_rt_build_path(struct sk_buff *, ax25_address *, ax25_address *, ax25_digi *);
+extern void ax25_rt_free(void);
+
+static inline void ax25_put_route(ax25_route *ax25_rt)
+{
+	atomic_dec(&ax25_rt->ref);
+}
+
+/* ax25_std_in.c */
+extern int  ax25_std_frame_in(ax25_cb *, struct sk_buff *, int);
+
+/* ax25_std_subr.c */
+extern void ax25_std_nr_error_recovery(ax25_cb *);
+extern void ax25_std_establish_data_link(ax25_cb *);
+extern void ax25_std_transmit_enquiry(ax25_cb *);
+extern void ax25_std_enquiry_response(ax25_cb *);
+extern void ax25_std_timeout_response(ax25_cb *);
+
+/* ax25_std_timer.c */
+extern void ax25_std_heartbeat_expiry(ax25_cb *);
+extern void ax25_std_t1timer_expiry(ax25_cb *);
+extern void ax25_std_t2timer_expiry(ax25_cb *);
+extern void ax25_std_t3timer_expiry(ax25_cb *);
+extern void ax25_std_idletimer_expiry(ax25_cb *);
+
+/* ax25_subr.c */
+extern void ax25_clear_queues(ax25_cb *);
+extern void ax25_frames_acked(ax25_cb *, unsigned short);
+extern void ax25_requeue_frames(ax25_cb *);
+extern int  ax25_validate_nr(ax25_cb *, unsigned short);
+extern int  ax25_decode(ax25_cb *, struct sk_buff *, int *, int *, int *);
+extern void ax25_send_control(ax25_cb *, int, int, int);
+extern void ax25_return_dm(struct net_device *, ax25_address *, ax25_address *, ax25_digi *);
+extern void ax25_calculate_t1(ax25_cb *);
+extern void ax25_calculate_rtt(ax25_cb *);
+extern void ax25_disconnect(ax25_cb *, int);
+
+/* ax25_timer.c */
+extern void ax25_start_heartbeat(ax25_cb *);
+extern void ax25_start_t1timer(ax25_cb *);
+extern void ax25_start_t2timer(ax25_cb *);
+extern void ax25_start_t3timer(ax25_cb *);
+extern void ax25_start_idletimer(ax25_cb *);
+extern void ax25_stop_heartbeat(ax25_cb *);
+extern void ax25_stop_t1timer(ax25_cb *);
+extern void ax25_stop_t2timer(ax25_cb *);
+extern void ax25_stop_t3timer(ax25_cb *);
+extern void ax25_stop_idletimer(ax25_cb *);
+extern int  ax25_t1timer_running(ax25_cb *);
+extern unsigned long ax25_display_timer(struct timer_list *);
+
+/* ax25_uid.c */
+extern int  ax25_uid_policy;
+extern ax25_address *ax25_findbyuid(uid_t);
+extern int  ax25_uid_ioctl(int, struct sockaddr_ax25 *);
+extern struct file_operations ax25_uid_fops;
+extern void ax25_uid_free(void);
+
+/* sysctl_net_ax25.c */
+#ifdef CONFIG_SYSCTL
+extern void ax25_register_sysctl(void);
+extern void ax25_unregister_sysctl(void);
+#else
+static inline void ax25_register_sysctl(void) {};
+static inline void ax25_unregister_sysctl(void) {};
+#endif /* CONFIG_SYSCTL */
+
+#endif
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
new file mode 100644
index 000000000000..42a84c53678b
--- /dev/null
+++ b/include/net/bluetooth/bluetooth.h
@@ -0,0 +1,181 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __BLUETOOTH_H
+#define __BLUETOOTH_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <net/sock.h>
+
+#ifndef AF_BLUETOOTH
+#define AF_BLUETOOTH	31
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#endif
+
+/* Reserv for core and drivers use */
+#define BT_SKB_RESERVE	8
+
+#define BTPROTO_L2CAP	0
+#define BTPROTO_HCI	1
+#define BTPROTO_SCO	2
+#define BTPROTO_RFCOMM	3
+#define BTPROTO_BNEP	4
+#define BTPROTO_CMTP	5
+#define BTPROTO_HIDP	6
+#define BTPROTO_AVDTP	7
+
+#define SOL_HCI		0
+#define SOL_L2CAP	6
+#define SOL_SCO		17
+#define SOL_RFCOMM	18
+
+#define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
+#define BT_DBG(fmt, arg...)  printk(KERN_INFO "%s: " fmt "\n" , __FUNCTION__ , ## arg)
+#define BT_ERR(fmt, arg...)  printk(KERN_ERR  "%s: " fmt "\n" , __FUNCTION__ , ## arg)
+
+#ifdef HCI_DATA_DUMP
+#define BT_DMP(buf, len) bt_dump(__FUNCTION__, buf, len)
+#else
+#define BT_DMP(D...)
+#endif
+
+extern struct proc_dir_entry *proc_bt;
+
+/* Connection and socket states */
+enum {
+	BT_CONNECTED = 1, /* Equal to TCP_ESTABLISHED to make net code happy */
+	BT_OPEN,
+	BT_BOUND,
+	BT_LISTEN,
+	BT_CONNECT,
+	BT_CONNECT2,
+	BT_CONFIG,
+	BT_DISCONN,
+	BT_CLOSED
+};
+
+/* Endianness conversions */
+#define htobs(a)	__cpu_to_le16(a)
+#define htobl(a)	__cpu_to_le32(a)
+#define btohs(a)	__le16_to_cpu(a)
+#define btohl(a)	__le32_to_cpu(a)
+
+/* BD Address */
+typedef struct {
+	__u8 b[6];
+} __attribute__((packed)) bdaddr_t;
+
+#define BDADDR_ANY   (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}})
+#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff}})
+
+/* Copy, swap, convert BD Address */
+static inline int bacmp(bdaddr_t *ba1, bdaddr_t *ba2)
+{
+	return memcmp(ba1, ba2, sizeof(bdaddr_t));
+}
+static inline void bacpy(bdaddr_t *dst, bdaddr_t *src)
+{
+	memcpy(dst, src, sizeof(bdaddr_t));
+}
+
+void baswap(bdaddr_t *dst, bdaddr_t *src);
+char *batostr(bdaddr_t *ba);
+bdaddr_t *strtoba(char *str);
+
+/* Common socket structures and functions */
+
+#define bt_sk(__sk) ((struct bt_sock *) __sk)
+
+struct bt_sock {
+	struct sock sk;
+	bdaddr_t    src;
+	bdaddr_t    dst;
+	struct list_head accept_q;
+	struct sock *parent;
+};
+
+struct bt_sock_list {
+	struct hlist_head head;
+	rwlock_t          lock;
+};
+
+int  bt_sock_register(int proto, struct net_proto_family *ops);
+int  bt_sock_unregister(int proto);
+void bt_sock_link(struct bt_sock_list *l, struct sock *s);
+void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
+int  bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len, int flags);
+uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
+int  bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
+
+void bt_accept_enqueue(struct sock *parent, struct sock *sk);
+void bt_accept_unlink(struct sock *sk);
+struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
+
+/* Skb helpers */
+struct bt_skb_cb {
+	int incoming;
+};
+#define bt_cb(skb) ((struct bt_skb_cb *)(skb->cb)) 
+
+static inline struct sk_buff *bt_skb_alloc(unsigned int len, int how)
+{
+	struct sk_buff *skb;
+
+	if ((skb = alloc_skb(len + BT_SKB_RESERVE, how))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+	return skb;
+}
+
+static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long len, 
+							int nb, int *err)
+{
+	struct sk_buff *skb;
+
+	if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+
+	return skb;
+}
+
+static inline int skb_frags_no(struct sk_buff *skb)
+{
+	register struct sk_buff *frag = skb_shinfo(skb)->frag_list;
+	register int n = 1;
+
+	for (; frag; frag=frag->next, n++);
+	return n;
+}
+
+void bt_dump(char *pref, __u8 *buf, int count);
+
+int bt_err(__u16 code);
+
+#endif /* __BLUETOOTH_H */
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
new file mode 100644
index 000000000000..6f0706f4af68
--- /dev/null
+++ b/include/net/bluetooth/hci.h
@@ -0,0 +1,755 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_H
+#define __HCI_H
+
+#define HCI_MAX_ACL_SIZE	1024
+#define HCI_MAX_SCO_SIZE	255
+#define HCI_MAX_EVENT_SIZE	260
+#define HCI_MAX_FRAME_SIZE	(HCI_MAX_ACL_SIZE + 4)
+
+/* HCI dev events */
+#define HCI_DEV_REG			1
+#define HCI_DEV_UNREG			2
+#define HCI_DEV_UP			3
+#define HCI_DEV_DOWN			4
+#define HCI_DEV_SUSPEND			5
+#define HCI_DEV_RESUME			6
+
+/* HCI notify events */
+#define HCI_NOTIFY_CONN_ADD		1
+#define HCI_NOTIFY_CONN_DEL		2
+#define HCI_NOTIFY_VOICE_SETTING	3
+
+/* HCI device types */
+#define HCI_VHCI	0
+#define HCI_USB		1
+#define HCI_PCCARD	2
+#define HCI_UART	3
+#define HCI_RS232	4
+#define HCI_PCI		5
+
+/* HCI device quirks */
+enum {
+	HCI_QUIRK_RESET_ON_INIT,
+	HCI_QUIRK_RAW_DEVICE
+};
+
+/* HCI device flags */
+enum {
+	HCI_UP,
+	HCI_INIT,
+	HCI_RUNNING,
+
+	HCI_PSCAN,
+	HCI_ISCAN,
+	HCI_AUTH,
+	HCI_ENCRYPT,
+	HCI_INQUIRY,
+
+	HCI_RAW,
+
+	HCI_SECMGR
+};
+
+/* HCI ioctl defines */
+#define HCIDEVUP	_IOW('H', 201, int)
+#define HCIDEVDOWN	_IOW('H', 202, int)
+#define HCIDEVRESET	_IOW('H', 203, int)
+#define HCIDEVRESTAT	_IOW('H', 204, int)
+
+#define HCIGETDEVLIST	_IOR('H', 210, int)
+#define HCIGETDEVINFO	_IOR('H', 211, int)
+#define HCIGETCONNLIST	_IOR('H', 212, int)
+#define HCIGETCONNINFO	_IOR('H', 213, int)
+
+#define HCISETRAW	_IOW('H', 220, int)
+#define HCISETSCAN	_IOW('H', 221, int)
+#define HCISETAUTH	_IOW('H', 222, int)
+#define HCISETENCRYPT	_IOW('H', 223, int)
+#define HCISETPTYPE	_IOW('H', 224, int)
+#define HCISETLINKPOL	_IOW('H', 225, int)
+#define HCISETLINKMODE	_IOW('H', 226, int)
+#define HCISETACLMTU	_IOW('H', 227, int)
+#define HCISETSCOMTU	_IOW('H', 228, int)
+
+#define HCISETSECMGR	_IOW('H', 230, int)
+
+#define HCIINQUIRY	_IOR('H', 240, int)
+
+/* HCI timeouts */
+#define HCI_CONN_TIMEOUT	(HZ * 40)
+#define HCI_DISCONN_TIMEOUT	(HZ * 2)
+#define HCI_CONN_IDLE_TIMEOUT	(HZ * 60)
+
+/* HCI Packet types */
+#define HCI_COMMAND_PKT		0x01
+#define HCI_ACLDATA_PKT		0x02
+#define HCI_SCODATA_PKT		0x03
+#define HCI_EVENT_PKT		0x04
+#define HCI_VENDOR_PKT		0xff
+
+/* HCI Packet types */
+#define HCI_DM1		0x0008
+#define HCI_DM3		0x0400
+#define HCI_DM5		0x4000
+#define HCI_DH1		0x0010
+#define HCI_DH3		0x0800
+#define HCI_DH5		0x8000
+
+#define HCI_HV1		0x0020
+#define HCI_HV2		0x0040
+#define HCI_HV3		0x0080
+
+#define SCO_PTYPE_MASK	(HCI_HV1 | HCI_HV2 | HCI_HV3)
+#define ACL_PTYPE_MASK	(~SCO_PTYPE_MASK)
+
+/* ACL flags */
+#define ACL_CONT		0x01
+#define ACL_START		0x02
+#define ACL_ACTIVE_BCAST	0x04
+#define ACL_PICO_BCAST		0x08
+
+/* Baseband links */
+#define SCO_LINK	0x00
+#define ACL_LINK	0x01
+
+/* LMP features */
+#define LMP_3SLOT	0x01
+#define LMP_5SLOT	0x02
+#define LMP_ENCRYPT	0x04
+#define LMP_SOFFSET	0x08
+#define LMP_TACCURACY	0x10
+#define LMP_RSWITCH	0x20
+#define LMP_HOLD	0x40
+#define LMP_SNIF	0x80
+
+#define LMP_PARK	0x01
+#define LMP_RSSI	0x02
+#define LMP_QUALITY	0x04
+#define LMP_SCO		0x08
+#define LMP_HV2		0x10
+#define LMP_HV3		0x20
+#define LMP_ULAW	0x40
+#define LMP_ALAW	0x80
+
+#define LMP_CVSD	0x01
+#define LMP_PSCHEME	0x02
+#define LMP_PCONTROL	0x04
+
+/* Link policies */
+#define HCI_LP_RSWITCH	0x0001
+#define HCI_LP_HOLD	0x0002
+#define HCI_LP_SNIFF	0x0004
+#define HCI_LP_PARK	0x0008
+
+/* Link mode */
+#define HCI_LM_ACCEPT	0x8000
+#define HCI_LM_MASTER	0x0001
+#define HCI_LM_AUTH	0x0002
+#define HCI_LM_ENCRYPT	0x0004
+#define HCI_LM_TRUSTED	0x0008
+#define HCI_LM_RELIABLE	0x0010
+#define HCI_LM_SECURE	0x0020
+
+/* -----  HCI Commands ---- */
+/* OGF & OCF values */
+
+/* Informational Parameters */
+#define OGF_INFO_PARAM	0x04
+
+#define OCF_READ_LOCAL_VERSION	0x0001
+struct hci_rp_read_loc_version {
+	__u8     status;
+	__u8     hci_ver;
+	__u16    hci_rev;
+	__u8     lmp_ver;
+	__u16    manufacturer;
+	__u16    lmp_subver;
+} __attribute__ ((packed));
+
+#define OCF_READ_LOCAL_FEATURES	0x0003
+struct hci_rp_read_loc_features {
+	__u8 status;
+	__u8 features[8];
+} __attribute__ ((packed));
+
+#define OCF_READ_BUFFER_SIZE	0x0005
+struct hci_rp_read_buffer_size {
+	__u8     status;
+	__u16    acl_mtu;
+	__u8     sco_mtu;
+	__u16    acl_max_pkt;
+	__u16    sco_max_pkt;
+} __attribute__ ((packed));
+
+#define OCF_READ_BD_ADDR	0x0009
+struct hci_rp_read_bd_addr {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+/* Host Controller and Baseband */
+#define OGF_HOST_CTL	0x03
+#define OCF_RESET		0x0003
+#define OCF_READ_AUTH_ENABLE	0x001F
+#define OCF_WRITE_AUTH_ENABLE	0x0020
+	#define AUTH_DISABLED		0x00
+	#define AUTH_ENABLED		0x01
+
+#define OCF_READ_ENCRYPT_MODE	0x0021
+#define OCF_WRITE_ENCRYPT_MODE	0x0022
+	#define ENCRYPT_DISABLED	0x00
+	#define ENCRYPT_P2P		0x01
+	#define ENCRYPT_BOTH		0x02
+
+#define OCF_WRITE_CA_TIMEOUT  	0x0016	
+#define OCF_WRITE_PG_TIMEOUT  	0x0018
+
+#define OCF_WRITE_SCAN_ENABLE 	0x001A
+	#define SCAN_DISABLED		0x00
+	#define SCAN_INQUIRY		0x01
+	#define SCAN_PAGE		0x02
+
+#define OCF_SET_EVENT_FLT	0x0005
+struct hci_cp_set_event_flt {
+	__u8     flt_type;
+	__u8     cond_type;
+	__u8     condition[0];
+} __attribute__ ((packed));
+
+/* Filter types */
+#define HCI_FLT_CLEAR_ALL	0x00
+#define HCI_FLT_INQ_RESULT	0x01
+#define HCI_FLT_CONN_SETUP	0x02
+
+/* CONN_SETUP Condition types */
+#define HCI_CONN_SETUP_ALLOW_ALL	0x00
+#define HCI_CONN_SETUP_ALLOW_CLASS	0x01
+#define HCI_CONN_SETUP_ALLOW_BDADDR	0x02
+
+/* CONN_SETUP Conditions */
+#define HCI_CONN_SETUP_AUTO_OFF	0x01
+#define HCI_CONN_SETUP_AUTO_ON	0x02
+
+#define OCF_READ_CLASS_OF_DEV	0x0023
+struct hci_rp_read_dev_class {
+	__u8     status;
+	__u8     dev_class[3];
+} __attribute__ ((packed));
+
+#define OCF_WRITE_CLASS_OF_DEV	0x0024
+struct hci_cp_write_dev_class {
+	__u8     dev_class[3];
+} __attribute__ ((packed));
+
+#define OCF_READ_VOICE_SETTING	0x0025
+struct hci_rp_read_voice_setting {
+	__u8	status;
+	__u16	voice_setting;
+} __attribute__ ((packed));
+
+#define OCF_WRITE_VOICE_SETTING	0x0026
+struct hci_cp_write_voice_setting {
+	__u16	voice_setting;
+} __attribute__ ((packed));
+
+#define OCF_HOST_BUFFER_SIZE	0x0033
+struct hci_cp_host_buffer_size {
+	__u16    acl_mtu;
+	__u8     sco_mtu;
+	__u16    acl_max_pkt;
+	__u16    sco_max_pkt;
+} __attribute__ ((packed));
+
+/* Link Control */
+#define OGF_LINK_CTL	0x01 
+#define OCF_CREATE_CONN		0x0005
+struct hci_cp_create_conn {
+	bdaddr_t bdaddr;
+	__u16    pkt_type;
+	__u8     pscan_rep_mode;
+	__u8     pscan_mode;
+	__u16    clock_offset;
+	__u8     role_switch;
+} __attribute__ ((packed));
+
+#define OCF_ACCEPT_CONN_REQ	0x0009
+struct hci_cp_accept_conn_req {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __attribute__ ((packed));
+
+#define OCF_REJECT_CONN_REQ	0x000a
+struct hci_cp_reject_conn_req {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __attribute__ ((packed));
+
+#define OCF_DISCONNECT	0x0006
+struct hci_cp_disconnect {
+	__u16    handle;
+	__u8     reason;
+} __attribute__ ((packed));
+
+#define OCF_ADD_SCO	0x0007
+struct hci_cp_add_sco {
+	__u16    handle;
+	__u16    pkt_type;
+} __attribute__ ((packed));
+
+#define OCF_INQUIRY		0x0001
+struct hci_cp_inquiry {
+	__u8     lap[3];
+	__u8     length;
+	__u8     num_rsp;
+} __attribute__ ((packed));
+
+#define OCF_INQUIRY_CANCEL	0x0002
+
+#define OCF_LINK_KEY_REPLY	0x000B
+struct hci_cp_link_key_reply {
+	bdaddr_t bdaddr;
+	__u8     link_key[16];
+} __attribute__ ((packed));
+
+#define OCF_LINK_KEY_NEG_REPLY	0x000C
+struct hci_cp_link_key_neg_reply {
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define OCF_PIN_CODE_REPLY	0x000D
+struct hci_cp_pin_code_reply {
+	bdaddr_t bdaddr;
+	__u8     pin_len;
+	__u8     pin_code[16];
+} __attribute__ ((packed));
+
+#define OCF_PIN_CODE_NEG_REPLY	0x000E
+struct hci_cp_pin_code_neg_reply {
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define OCF_CHANGE_CONN_PTYPE	0x000F
+struct hci_cp_change_conn_ptype {
+	__u16    handle;
+	__u16    pkt_type;
+} __attribute__ ((packed));
+
+#define OCF_AUTH_REQUESTED	0x0011
+struct hci_cp_auth_requested {
+	__u16    handle;
+} __attribute__ ((packed));
+
+#define OCF_SET_CONN_ENCRYPT	0x0013
+struct hci_cp_set_conn_encrypt {
+	__u16    handle;
+	__u8     encrypt;
+} __attribute__ ((packed));
+
+#define OCF_CHANGE_CONN_LINK_KEY 0x0015
+struct hci_cp_change_conn_link_key {
+	__u16    handle;
+} __attribute__ ((packed));
+
+#define OCF_READ_REMOTE_FEATURES 0x001B
+struct hci_cp_read_rmt_features {
+	__u16    handle;
+} __attribute__ ((packed));
+
+#define OCF_READ_REMOTE_VERSION 0x001D
+struct hci_cp_read_rmt_version {
+	__u16    handle;
+} __attribute__ ((packed));
+
+/* Link Policy */
+#define OGF_LINK_POLICY	 0x02   
+#define OCF_ROLE_DISCOVERY	0x0009
+struct hci_cp_role_discovery {
+	__u16    handle;
+} __attribute__ ((packed));
+struct hci_rp_role_discovery {
+	__u8     status;
+	__u16    handle;
+	__u8     role;
+} __attribute__ ((packed));
+
+#define OCF_READ_LINK_POLICY	0x000C
+struct hci_cp_read_link_policy {
+	__u16    handle;
+} __attribute__ ((packed));
+struct hci_rp_read_link_policy {
+	__u8     status;
+	__u16    handle;
+	__u16    policy;
+} __attribute__ ((packed));
+
+#define OCF_SWITCH_ROLE	0x000B
+struct hci_cp_switch_role {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __attribute__ ((packed));
+
+#define OCF_WRITE_LINK_POLICY	0x000D
+struct hci_cp_write_link_policy {
+	__u16    handle;
+	__u16    policy;
+} __attribute__ ((packed));
+struct hci_rp_write_link_policy {
+	__u8     status;
+	__u16    handle;
+} __attribute__ ((packed));
+
+/* Status params */
+#define OGF_STATUS_PARAM	0x05
+
+/* Testing commands */
+#define OGF_TESTING_CMD		0x3E
+
+/* Vendor specific commands */
+#define OGF_VENDOR_CMD		0x3F
+
+/* ---- HCI Events ---- */
+#define HCI_EV_INQUIRY_COMPLETE	0x01
+
+#define HCI_EV_INQUIRY_RESULT	0x02
+struct inquiry_info {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     pscan_mode;
+	__u8     dev_class[3];
+	__u16    clock_offset;
+} __attribute__ ((packed));
+
+#define HCI_EV_INQUIRY_RESULT_WITH_RSSI	0x22
+struct inquiry_info_with_rssi {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     dev_class[3];
+	__u16    clock_offset;
+	__s8     rssi;
+} __attribute__ ((packed));
+
+#define HCI_EV_CONN_COMPLETE 	0x03
+struct hci_ev_conn_complete {
+	__u8     status;
+	__u16    handle;
+	bdaddr_t bdaddr;
+	__u8     link_type;
+	__u8     encr_mode;
+} __attribute__ ((packed));
+
+#define HCI_EV_CONN_REQUEST	0x04
+struct hci_ev_conn_request {
+	bdaddr_t bdaddr;
+	__u8     dev_class[3];
+	__u8     link_type;
+} __attribute__ ((packed));
+
+#define HCI_EV_DISCONN_COMPLETE	0x05
+struct hci_ev_disconn_complete {
+	__u8     status;
+	__u16    handle;
+	__u8     reason;
+} __attribute__ ((packed));
+
+#define HCI_EV_AUTH_COMPLETE	0x06
+struct hci_ev_auth_complete {
+	__u8     status;
+	__u16    handle;
+} __attribute__ ((packed));
+
+#define HCI_EV_ENCRYPT_CHANGE	0x08
+struct hci_ev_encrypt_change {
+	__u8     status;
+	__u16    handle;
+	__u8     encrypt;
+} __attribute__ ((packed));
+
+#define HCI_EV_CHANGE_CONN_LINK_KEY_COMPLETE	0x09
+struct hci_ev_change_conn_link_key_complete {
+	__u8     status;
+	__u16    handle;
+} __attribute__ ((packed));
+
+#define HCI_EV_QOS_SETUP_COMPLETE	0x0D
+struct hci_qos {
+	__u8     service_type;
+	__u32    token_rate;
+	__u32    peak_bandwidth;
+	__u32    latency;
+	__u32    delay_variation;
+} __attribute__ ((packed));
+struct hci_ev_qos_setup_complete {
+	__u8     status;
+	__u16    handle;
+	struct   hci_qos qos;
+} __attribute__ ((packed));
+
+#define HCI_EV_CMD_COMPLETE 	0x0E
+struct hci_ev_cmd_complete {
+	__u8     ncmd;
+	__u16    opcode;
+} __attribute__ ((packed));
+
+#define HCI_EV_CMD_STATUS 	0x0F
+struct hci_ev_cmd_status {
+	__u8     status;
+	__u8     ncmd;
+	__u16    opcode;
+} __attribute__ ((packed));
+
+#define HCI_EV_NUM_COMP_PKTS	0x13
+struct hci_ev_num_comp_pkts {
+	__u8     num_hndl;
+	/* variable length part */
+} __attribute__ ((packed));
+
+#define HCI_EV_ROLE_CHANGE	0x12
+struct hci_ev_role_change {
+	__u8     status;
+	bdaddr_t bdaddr;
+	__u8     role;
+} __attribute__ ((packed));
+
+#define HCI_EV_MODE_CHANGE	0x14
+struct hci_ev_mode_change {
+	__u8     status;
+	__u16    handle;
+	__u8     mode;
+	__u16    interval;
+} __attribute__ ((packed));
+
+#define HCI_EV_PIN_CODE_REQ	0x16
+struct hci_ev_pin_code_req {
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define HCI_EV_LINK_KEY_REQ	0x17
+struct hci_ev_link_key_req {
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define HCI_EV_LINK_KEY_NOTIFY	0x18
+struct hci_ev_link_key_notify {
+	bdaddr_t bdaddr;
+	__u8	 link_key[16];
+	__u8	 key_type;
+} __attribute__ ((packed));
+
+#define HCI_EV_RMT_FEATURES	0x0B
+struct hci_ev_rmt_features {
+	__u8     status;
+	__u16    handle;
+	__u8     features[8];
+} __attribute__ ((packed));
+
+#define HCI_EV_RMT_VERSION	0x0C
+struct hci_ev_rmt_version {
+	__u8     status;
+	__u16    handle;
+	__u8     lmp_ver;
+	__u16    manufacturer;
+	__u16    lmp_subver;
+} __attribute__ ((packed));
+
+#define HCI_EV_CLOCK_OFFSET	0x01C
+struct hci_ev_clock_offset {
+	__u8     status;
+	__u16    handle;
+	__u16    clock_offset;
+} __attribute__ ((packed));
+
+/* Internal events generated by Bluetooth stack */
+#define HCI_EV_STACK_INTERNAL	0xFD
+struct hci_ev_stack_internal {
+	__u16    type;
+	__u8     data[0];
+} __attribute__ ((packed));
+
+#define HCI_EV_SI_DEVICE  	0x01
+struct hci_ev_si_device {
+	__u16    event;
+	__u16    dev_id;
+} __attribute__ ((packed));
+
+#define HCI_EV_SI_SECURITY	0x02
+struct hci_ev_si_security {
+	__u16    event;
+	__u16    proto;
+	__u16    subproto;
+	__u8     incoming;
+} __attribute__ ((packed));
+
+/* ---- HCI Packet structures ---- */
+#define HCI_COMMAND_HDR_SIZE 3
+#define HCI_EVENT_HDR_SIZE   2
+#define HCI_ACL_HDR_SIZE     4
+#define HCI_SCO_HDR_SIZE     3
+
+struct hci_command_hdr {
+	__u16 	opcode;		/* OCF & OGF */
+	__u8 	plen;
+} __attribute__ ((packed));
+
+struct hci_event_hdr {
+	__u8 	evt;
+	__u8 	plen;
+} __attribute__ ((packed));
+
+struct hci_acl_hdr {
+	__u16 	handle;		/* Handle & Flags(PB, BC) */
+	__u16 	dlen;
+} __attribute__ ((packed));
+
+struct hci_sco_hdr {
+	__u16 	handle;
+	__u8 	dlen;
+} __attribute__ ((packed));
+
+/* Command opcode pack/unpack */
+#define hci_opcode_pack(ogf, ocf)	(__u16)((ocf & 0x03ff)|(ogf << 10))
+#define hci_opcode_ogf(op)		(op >> 10)
+#define hci_opcode_ocf(op)		(op & 0x03ff)
+
+/* ACL handle and flags pack/unpack */
+#define hci_handle_pack(h, f)	(__u16)((h & 0x0fff)|(f << 12))
+#define hci_handle(h)		(h & 0x0fff)
+#define hci_flags(h)		(h >> 12)
+
+/* ---- HCI Sockets ---- */
+
+/* Socket options */
+#define HCI_DATA_DIR	1
+#define HCI_FILTER	2
+#define HCI_TIME_STAMP	3
+
+/* CMSG flags */
+#define HCI_CMSG_DIR	0x0001
+#define HCI_CMSG_TSTAMP	0x0002
+
+struct sockaddr_hci {
+	sa_family_t    hci_family;
+	unsigned short hci_dev;
+};
+#define HCI_DEV_NONE	0xffff
+
+struct hci_filter {
+	unsigned long type_mask;
+	unsigned long event_mask[2];
+	__u16   opcode;
+};
+
+struct hci_ufilter {
+	__u32   type_mask;
+	__u32   event_mask[2];
+	__u16   opcode;
+};
+
+#define HCI_FLT_TYPE_BITS	31
+#define HCI_FLT_EVENT_BITS	63
+#define HCI_FLT_OGF_BITS	63
+#define HCI_FLT_OCF_BITS	127
+
+/* ---- HCI Ioctl requests structures ---- */
+struct hci_dev_stats {
+	__u32 err_rx;
+	__u32 err_tx;
+	__u32 cmd_tx;
+	__u32 evt_rx;
+	__u32 acl_tx;
+	__u32 acl_rx;
+	__u32 sco_tx;
+	__u32 sco_rx;
+	__u32 byte_rx;
+	__u32 byte_tx;
+};
+
+struct hci_dev_info {
+	__u16 dev_id;
+	char  name[8];
+
+	bdaddr_t bdaddr;
+
+	__u32 flags;
+	__u8  type;
+
+	__u8  features[8];
+
+	__u32 pkt_type;
+	__u32 link_policy;
+	__u32 link_mode;
+
+	__u16 acl_mtu;
+	__u16 acl_pkts;
+	__u16 sco_mtu;
+	__u16 sco_pkts;
+
+	struct hci_dev_stats stat;
+};
+
+struct hci_conn_info {
+	__u16    handle;
+	bdaddr_t bdaddr;
+	__u8	 type;
+	__u8	 out;
+	__u16	 state;
+	__u32	 link_mode;
+};
+
+struct hci_dev_req {
+	__u16 dev_id;
+	__u32 dev_opt;
+};
+
+struct hci_dev_list_req {
+	__u16  dev_num;
+	struct hci_dev_req dev_req[0];	/* hci_dev_req structures */
+};
+
+struct hci_conn_list_req {
+	__u16  dev_id;
+	__u16  conn_num;
+	struct hci_conn_info conn_info[0];
+};
+
+struct hci_conn_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+	struct   hci_conn_info conn_info[0];
+};
+
+struct hci_inquiry_req {
+	__u16 dev_id;
+	__u16 flags;
+	__u8  lap[3];
+	__u8  length;
+	__u8  num_rsp;
+};
+#define IREQ_CACHE_FLUSH 0x0001
+
+#endif /* __HCI_H */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
new file mode 100644
index 000000000000..6d63a47c731b
--- /dev/null
+++ b/include/net/bluetooth/hci_core.h
@@ -0,0 +1,626 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_CORE_H
+#define __HCI_CORE_H
+
+#include <linux/proc_fs.h>
+#include <net/bluetooth/hci.h>
+
+/* HCI upper protocols */
+#define HCI_PROTO_L2CAP	0
+#define HCI_PROTO_SCO	1
+
+#define HCI_INIT_TIMEOUT (HZ * 10)
+
+extern struct proc_dir_entry *proc_bt_hci;
+
+/* HCI Core structures */
+
+struct inquiry_data {
+	bdaddr_t	bdaddr;
+	__u8		pscan_rep_mode;
+	__u8		pscan_period_mode;
+	__u8		pscan_mode;
+	__u8		dev_class[3];
+	__u16		clock_offset;
+	__s8		rssi;
+};
+
+struct inquiry_entry {
+	struct inquiry_entry 	*next;
+	__u32			timestamp;
+	struct inquiry_data	data;
+};
+
+struct inquiry_cache {
+	spinlock_t 		lock;
+	__u32			timestamp;
+	struct inquiry_entry 	*list;
+};
+
+struct hci_conn_hash {
+	struct list_head list;
+	spinlock_t       lock;
+	unsigned int     acl_num;
+	unsigned int     sco_num;
+};
+
+struct hci_dev {
+	struct list_head list;
+	spinlock_t	lock;
+	atomic_t	refcnt;
+
+	char		name[8];
+	unsigned long	flags;
+	__u16		id;
+	__u8		type;
+	bdaddr_t	bdaddr;
+	__u8		features[8];
+	__u16		voice_setting;
+
+	__u16		pkt_type;
+	__u16		link_policy;
+	__u16		link_mode;
+
+	unsigned long	quirks;
+
+	atomic_t	cmd_cnt;
+	unsigned int	acl_cnt;
+	unsigned int	sco_cnt;
+
+	unsigned int	acl_mtu;
+	unsigned int	sco_mtu;
+	unsigned int	acl_pkts;
+	unsigned int	sco_pkts;
+
+	unsigned long	cmd_last_tx;
+	unsigned long	acl_last_tx;
+	unsigned long	sco_last_tx;
+
+	struct tasklet_struct	cmd_task;
+	struct tasklet_struct	rx_task;
+	struct tasklet_struct	tx_task;
+
+	struct sk_buff_head	rx_q;
+	struct sk_buff_head	raw_q;
+	struct sk_buff_head	cmd_q;
+
+	struct sk_buff		*sent_cmd;
+
+	struct semaphore	req_lock;
+	wait_queue_head_t	req_wait_q;
+	__u32			req_status;
+	__u32			req_result;
+
+	struct inquiry_cache	inq_cache;
+	struct hci_conn_hash	conn_hash;
+
+	struct hci_dev_stats	stat;
+
+	struct sk_buff_head	driver_init;
+
+	void			*driver_data;
+	void			*core_data;
+
+	atomic_t 		promisc;
+
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry	*proc;
+#endif
+
+	struct class_device	class_dev;
+
+	struct module 		*owner;
+
+	int (*open)(struct hci_dev *hdev);
+	int (*close)(struct hci_dev *hdev);
+	int (*flush)(struct hci_dev *hdev);
+	int (*send)(struct sk_buff *skb);
+	void (*destruct)(struct hci_dev *hdev);
+	void (*notify)(struct hci_dev *hdev, unsigned int evt);
+	int (*ioctl)(struct hci_dev *hdev, unsigned int cmd, unsigned long arg);
+};
+
+struct hci_conn {
+	struct list_head list;
+
+	atomic_t	 refcnt;
+	spinlock_t	 lock;
+
+	bdaddr_t	 dst;
+	__u16		 handle;
+	__u16		 state;
+	__u8		 type;
+	__u8		 out;
+	__u8		 dev_class[3];
+	__u32		 link_mode;
+	unsigned long	 pend;
+	
+	unsigned int	 sent;
+	
+	struct sk_buff_head data_q;
+
+	struct timer_list timer;
+	
+	struct hci_dev	*hdev;
+	void		*l2cap_data;
+	void		*sco_data;
+	void		*priv;
+
+	struct hci_conn	*link;
+};
+
+extern struct hci_proto *hci_proto[];
+extern struct list_head hci_dev_list;
+extern struct list_head hci_cb_list;
+extern rwlock_t hci_dev_list_lock;
+extern rwlock_t hci_cb_list_lock;
+
+/* ----- Inquiry cache ----- */
+#define INQUIRY_CACHE_AGE_MAX   (HZ*30)   // 30 seconds
+#define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   // 60 seconds
+
+#define inquiry_cache_lock(c)		spin_lock(&c->lock)
+#define inquiry_cache_unlock(c)		spin_unlock(&c->lock)
+#define inquiry_cache_lock_bh(c)	spin_lock_bh(&c->lock)
+#define inquiry_cache_unlock_bh(c)	spin_unlock_bh(&c->lock)
+
+static inline void inquiry_cache_init(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	spin_lock_init(&c->lock);
+	c->list = NULL;
+}
+
+static inline int inquiry_cache_empty(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	return (c->list == NULL);
+}
+
+static inline long inquiry_cache_age(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	return jiffies - c->timestamp;
+}
+
+static inline long inquiry_entry_age(struct inquiry_entry *e)
+{
+	return jiffies - e->timestamp;
+}
+
+struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr);
+void hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data);
+
+/* ----- HCI Connections ----- */
+enum {
+	HCI_CONN_AUTH_PEND,
+	HCI_CONN_ENCRYPT_PEND,
+	HCI_CONN_RSWITCH_PEND
+};
+
+static inline void hci_conn_hash_init(struct hci_dev *hdev)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	INIT_LIST_HEAD(&h->list);
+	spin_lock_init(&h->lock);
+	h->acl_num = 0;
+	h->sco_num = 0;
+}
+
+static inline void hci_conn_hash_add(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	list_add(&c->list, &h->list);
+	if (c->type == ACL_LINK)
+		h->acl_num++;
+	else
+		h->sco_num++;
+}
+
+static inline void hci_conn_hash_del(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	list_del(&c->list);
+	if (c->type == ACL_LINK)
+		h->acl_num--;
+	else
+		h->sco_num--;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_handle(struct hci_dev *hdev,
+					__u16 handle)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct list_head *p;
+	struct hci_conn  *c;
+
+	list_for_each(p, &h->list) {
+		c = list_entry(p, struct hci_conn, list);
+		if (c->handle == handle)
+			return c;
+	}
+	return NULL;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_ba(struct hci_dev *hdev,
+					__u8 type, bdaddr_t *ba)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct list_head *p;
+	struct hci_conn  *c;
+
+	list_for_each(p, &h->list) {
+		c = list_entry(p, struct hci_conn, list);
+		if (c->type == type && !bacmp(&c->dst, ba))
+			return c;
+	}
+	return NULL;
+}
+
+void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
+void hci_add_sco(struct hci_conn *conn, __u16 handle);
+
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+int    hci_conn_del(struct hci_conn *conn);
+void   hci_conn_hash_flush(struct hci_dev *hdev);
+
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *src);
+int hci_conn_auth(struct hci_conn *conn);
+int hci_conn_encrypt(struct hci_conn *conn);
+int hci_conn_change_link_key(struct hci_conn *conn);
+int hci_conn_switch_role(struct hci_conn *conn, uint8_t role);
+
+static inline void hci_conn_set_timer(struct hci_conn *conn, unsigned long timeout)
+{
+	mod_timer(&conn->timer, jiffies + timeout);
+}
+
+static inline void hci_conn_del_timer(struct hci_conn *conn)
+{
+	del_timer(&conn->timer);
+}
+
+static inline void hci_conn_hold(struct hci_conn *conn)
+{
+	atomic_inc(&conn->refcnt);
+	hci_conn_del_timer(conn);
+}
+
+static inline void hci_conn_put(struct hci_conn *conn)
+{
+	if (atomic_dec_and_test(&conn->refcnt)) {
+		if (conn->type == ACL_LINK) {
+			unsigned long timeo = (conn->out) ?
+				HCI_DISCONN_TIMEOUT : HCI_DISCONN_TIMEOUT * 2;
+			hci_conn_set_timer(conn, timeo);
+		} else
+			hci_conn_set_timer(conn, HZ / 100);
+	}
+}
+
+/* ----- HCI tasks ----- */
+static inline void hci_sched_cmd(struct hci_dev *hdev)
+{
+	tasklet_schedule(&hdev->cmd_task);
+}
+
+static inline void hci_sched_rx(struct hci_dev *hdev)
+{
+	tasklet_schedule(&hdev->rx_task);
+}
+
+static inline void hci_sched_tx(struct hci_dev *hdev)
+{
+	tasklet_schedule(&hdev->tx_task);
+}
+
+/* ----- HCI Devices ----- */
+static inline void __hci_dev_put(struct hci_dev *d)
+{
+	if (atomic_dec_and_test(&d->refcnt))
+		d->destruct(d);
+}
+
+static inline void hci_dev_put(struct hci_dev *d)
+{ 
+	__hci_dev_put(d);
+	module_put(d->owner);
+}
+
+static inline struct hci_dev *__hci_dev_hold(struct hci_dev *d)
+{
+	atomic_inc(&d->refcnt);
+	return d;
+}
+
+static inline struct hci_dev *hci_dev_hold(struct hci_dev *d)
+{
+	if (try_module_get(d->owner))
+		return __hci_dev_hold(d);
+	return NULL;
+}
+
+#define hci_dev_lock(d)		spin_lock(&d->lock)
+#define hci_dev_unlock(d)	spin_unlock(&d->lock)
+#define hci_dev_lock_bh(d)	spin_lock_bh(&d->lock)
+#define hci_dev_unlock_bh(d)	spin_unlock_bh(&d->lock)
+
+struct hci_dev *hci_dev_get(int index);
+struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst);
+
+struct hci_dev *hci_alloc_dev(void);
+void hci_free_dev(struct hci_dev *hdev);
+int hci_register_dev(struct hci_dev *hdev);
+int hci_unregister_dev(struct hci_dev *hdev);
+int hci_suspend_dev(struct hci_dev *hdev);
+int hci_resume_dev(struct hci_dev *hdev);
+int hci_dev_open(__u16 dev);
+int hci_dev_close(__u16 dev);
+int hci_dev_reset(__u16 dev);
+int hci_dev_reset_stat(__u16 dev);
+int hci_dev_cmd(unsigned int cmd, void __user *arg);
+int hci_get_dev_list(void __user *arg);
+int hci_get_dev_info(void __user *arg);
+int hci_get_conn_list(void __user *arg);
+int hci_get_conn_info(struct hci_dev *hdev, void __user *arg);
+int hci_inquiry(void __user *arg);
+
+void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
+
+/* Receive frame from HCI drivers */
+static inline int hci_recv_frame(struct sk_buff *skb)
+{
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+	if (!hdev || (!test_bit(HCI_UP, &hdev->flags) 
+			&& !test_bit(HCI_INIT, &hdev->flags))) {
+		kfree_skb(skb);
+		return -ENXIO;
+	}
+
+	/* Incomming skb */
+	bt_cb(skb)->incoming = 1;
+
+	/* Time stamp */
+	do_gettimeofday(&skb->stamp);
+
+	/* Queue frame for rx task */
+	skb_queue_tail(&hdev->rx_q, skb);
+	hci_sched_rx(hdev);
+	return 0;
+}
+
+int hci_register_sysfs(struct hci_dev *hdev);
+void hci_unregister_sysfs(struct hci_dev *hdev);
+
+#define SET_HCIDEV_DEV(hdev, pdev) ((hdev)->class_dev.dev = (pdev))
+
+/* ----- LMP capabilities ----- */
+#define lmp_rswitch_capable(dev) (dev->features[0] & LMP_RSWITCH)
+#define lmp_encrypt_capable(dev) (dev->features[0] & LMP_ENCRYPT)
+
+/* ----- HCI protocols ----- */
+struct hci_proto {
+	char 		*name;
+	unsigned int	id;
+	unsigned long	flags;
+
+	void		*priv;
+
+	int (*connect_ind) 	(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type);
+	int (*connect_cfm)	(struct hci_conn *conn, __u8 status);
+	int (*disconn_ind)	(struct hci_conn *conn, __u8 reason);
+	int (*recv_acldata)	(struct hci_conn *conn, struct sk_buff *skb, __u16 flags);
+	int (*recv_scodata)	(struct hci_conn *conn, struct sk_buff *skb);
+	int (*auth_cfm)		(struct hci_conn *conn, __u8 status);
+	int (*encrypt_cfm)	(struct hci_conn *conn, __u8 status);
+};
+
+static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type)
+{
+	register struct hci_proto *hp;
+	int mask = 0;
+	
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->connect_ind)
+		mask |= hp->connect_ind(hdev, bdaddr, type);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->connect_ind)
+		mask |= hp->connect_ind(hdev, bdaddr, type);
+
+	return mask;
+}
+
+static inline void hci_proto_connect_cfm(struct hci_conn *conn, __u8 status)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->connect_cfm)
+		hp->connect_cfm(conn, status);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->connect_cfm)
+		hp->connect_cfm(conn, status);
+}
+
+static inline void hci_proto_disconn_ind(struct hci_conn *conn, __u8 reason)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->disconn_ind)
+		hp->disconn_ind(conn, reason);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->disconn_ind)
+		hp->disconn_ind(conn, reason);
+}
+
+static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->auth_cfm)
+		hp->auth_cfm(conn, status);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->auth_cfm)
+		hp->auth_cfm(conn, status);
+}
+
+static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->encrypt_cfm)
+		hp->encrypt_cfm(conn, status);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->encrypt_cfm)
+		hp->encrypt_cfm(conn, status);
+}
+
+int hci_register_proto(struct hci_proto *hproto);
+int hci_unregister_proto(struct hci_proto *hproto);
+
+/* ----- HCI callbacks ----- */
+struct hci_cb {
+	struct list_head list;
+
+	char *name;
+
+	void (*auth_cfm)	(struct hci_conn *conn, __u8 status);
+	void (*encrypt_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
+	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
+	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
+};
+
+static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+
+	hci_proto_auth_cfm(conn, status);
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->auth_cfm)
+			cb->auth_cfm(conn, status);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encrypt)
+{
+	struct list_head *p;
+
+	hci_proto_encrypt_cfm(conn, status);
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->encrypt_cfm)
+			cb->encrypt_cfm(conn, status, encrypt);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->key_change_cfm)
+			cb->key_change_cfm(conn, status);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status, __u8 role)
+{
+	struct list_head *p;
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->role_switch_cfm)
+			cb->role_switch_cfm(conn, status, role);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+int hci_register_cb(struct hci_cb *hcb);
+int hci_unregister_cb(struct hci_cb *hcb);
+
+int hci_register_notifier(struct notifier_block *nb);
+int hci_unregister_notifier(struct notifier_block *nb);
+
+int hci_send_cmd(struct hci_dev *hdev, __u16 ogf, __u16 ocf, __u32 plen, void *param);
+int hci_send_acl(struct hci_conn *conn, struct sk_buff *skb, __u16 flags);
+int hci_send_sco(struct hci_conn *conn, struct sk_buff *skb);
+
+void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 ogf, __u16 ocf);
+
+void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data);
+
+/* ----- HCI Sockets ----- */
+void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb);
+
+/* HCI info for socket */
+#define hci_pi(sk) ((struct hci_pinfo *) sk)
+
+struct hci_pinfo {
+	struct bt_sock    bt;
+	struct hci_dev    *hdev;
+	struct hci_filter filter;
+	__u32             cmsg_mask;
+};
+
+/* HCI security filter */
+#define HCI_SFLT_MAX_OGF  5
+
+struct hci_sec_filter {
+	__u32 type_mask;
+	__u32 event_mask[2];
+	__u32 ocf_mask[HCI_SFLT_MAX_OGF + 1][4];
+};
+
+/* ----- HCI requests ----- */
+#define HCI_REQ_DONE	  0
+#define HCI_REQ_PEND	  1
+#define HCI_REQ_CANCELED  2
+
+#define hci_req_lock(d)		down(&d->req_lock)
+#define hci_req_unlock(d)	up(&d->req_lock)
+
+void hci_req_complete(struct hci_dev *hdev, int result);
+
+#endif /* __HCI_CORE_H */
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
new file mode 100644
index 000000000000..8242a0ee1f58
--- /dev/null
+++ b/include/net/bluetooth/l2cap.h
@@ -0,0 +1,238 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __L2CAP_H
+#define __L2CAP_H
+
+/* L2CAP defaults */
+#define L2CAP_DEFAULT_MTU	672
+#define L2CAP_DEFAULT_FLUSH_TO	0xFFFF
+
+#define L2CAP_CONN_TIMEOUT	(HZ * 40)
+
+/* L2CAP socket address */
+struct sockaddr_l2 {
+	sa_family_t	l2_family;
+	unsigned short	l2_psm;
+	bdaddr_t	l2_bdaddr;
+};
+
+/* L2CAP socket options */
+#define L2CAP_OPTIONS	0x01
+struct l2cap_options {
+	__u16 omtu;
+	__u16 imtu;
+	__u16 flush_to;
+	__u8  mode;
+};
+
+#define L2CAP_CONNINFO	0x02
+struct l2cap_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define L2CAP_LM	0x03
+#define L2CAP_LM_MASTER		0x0001
+#define L2CAP_LM_AUTH		0x0002
+#define L2CAP_LM_ENCRYPT	0x0004
+#define L2CAP_LM_TRUSTED	0x0008
+#define L2CAP_LM_RELIABLE	0x0010
+#define L2CAP_LM_SECURE		0x0020
+
+/* L2CAP command codes */
+#define L2CAP_COMMAND_REJ 0x01
+#define L2CAP_CONN_REQ    0x02
+#define L2CAP_CONN_RSP    0x03
+#define L2CAP_CONF_REQ    0x04
+#define L2CAP_CONF_RSP    0x05
+#define L2CAP_DISCONN_REQ 0x06
+#define L2CAP_DISCONN_RSP 0x07
+#define L2CAP_ECHO_REQ    0x08
+#define L2CAP_ECHO_RSP    0x09
+#define L2CAP_INFO_REQ    0x0a
+#define L2CAP_INFO_RSP    0x0b
+
+/* L2CAP structures */
+struct l2cap_hdr {
+	__u16      len;
+	__u16      cid;
+} __attribute__ ((packed));
+#define L2CAP_HDR_SIZE		4
+
+struct l2cap_cmd_hdr {
+	__u8       code;
+	__u8       ident;
+	__u16      len;
+} __attribute__ ((packed));
+#define L2CAP_CMD_HDR_SIZE	4
+
+struct l2cap_cmd_rej {
+	__u16      reason;
+} __attribute__ ((packed));
+
+struct l2cap_conn_req {
+	__u16      psm;
+	__u16      scid;
+} __attribute__ ((packed));
+
+struct l2cap_conn_rsp {
+	__u16      dcid;
+	__u16      scid;
+	__u16      result;
+	__u16      status;
+} __attribute__ ((packed));
+
+/* connect result */
+#define L2CAP_CR_SUCCESS    0x0000
+#define L2CAP_CR_PEND       0x0001
+#define L2CAP_CR_BAD_PSM    0x0002
+#define L2CAP_CR_SEC_BLOCK  0x0003
+#define L2CAP_CR_NO_MEM     0x0004
+
+/* connect status */
+#define L2CAP_CS_NO_INFO      0x0000
+#define L2CAP_CS_AUTHEN_PEND  0x0001
+#define L2CAP_CS_AUTHOR_PEND  0x0002
+
+struct l2cap_conf_req {
+	__u16      dcid;
+	__u16      flags;
+	__u8       data[0];
+} __attribute__ ((packed));
+
+struct l2cap_conf_rsp {
+	__u16      scid;
+	__u16      flags;
+	__u16      result;
+	__u8       data[0];
+} __attribute__ ((packed));
+
+#define L2CAP_CONF_SUCCESS	0x00
+#define L2CAP_CONF_UNACCEPT	0x01
+
+struct l2cap_conf_opt {
+	__u8       type;
+	__u8       len;
+	__u8       val[0];
+} __attribute__ ((packed));
+#define L2CAP_CONF_OPT_SIZE	2
+
+#define L2CAP_CONF_MTU		0x01
+#define L2CAP_CONF_FLUSH_TO	0x02
+#define L2CAP_CONF_QOS		0x03
+#define L2CAP_CONF_RFC		0x04
+
+#define L2CAP_CONF_MAX_SIZE	22
+
+struct l2cap_disconn_req {
+	__u16      dcid;
+	__u16      scid;
+} __attribute__ ((packed));
+
+struct l2cap_disconn_rsp {
+	__u16      dcid;
+	__u16      scid;
+} __attribute__ ((packed));
+
+struct l2cap_info_req {
+	__u16       type;
+	__u8        data[0];
+} __attribute__ ((packed));
+
+struct l2cap_info_rsp {
+	__u16       type;
+	__u16       result;
+	__u8        data[0];
+} __attribute__ ((packed));
+
+/* info type */
+#define L2CAP_IT_CL_MTU     0x0001
+#define L2CAP_IT_FEAT_MASK  0x0002
+
+/* info result */
+#define L2CAP_IR_SUCCESS    0x0000
+#define L2CAP_IR_NOTSUPP    0x0001
+
+/* ----- L2CAP connections ----- */
+struct l2cap_chan_list {
+	struct sock	*head;
+	rwlock_t	lock;
+	long		num;
+};
+
+struct l2cap_conn {
+	struct hci_conn	*hcon;
+
+	bdaddr_t	*dst;
+	bdaddr_t	*src;
+
+	unsigned int	mtu;
+
+	spinlock_t	lock;
+
+	struct sk_buff *rx_skb;
+	__u32		rx_len;
+	__u8		rx_ident;
+	__u8		tx_ident;
+
+	struct l2cap_chan_list chan_list;
+};
+
+/* ----- L2CAP channel and socket info ----- */
+#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
+
+struct l2cap_pinfo {
+	struct bt_sock	bt;
+	__u16		psm;
+	__u16		dcid;
+	__u16		scid;
+
+	__u16		imtu;
+	__u16		omtu;
+	__u16		flush_to;
+
+	__u32		link_mode;
+
+	__u8		conf_state;
+	__u8		conf_retry;
+	__u16		conf_mtu;
+
+	__u8		ident;
+
+	__u16		sport;
+
+	struct l2cap_conn	*conn;
+	struct sock		*next_c;
+	struct sock		*prev_c;
+};
+
+#define L2CAP_CONF_REQ_SENT    0x01
+#define L2CAP_CONF_INPUT_DONE  0x02
+#define L2CAP_CONF_OUTPUT_DONE 0x04
+#define L2CAP_CONF_MAX_RETRIES 2
+
+void l2cap_load(void);
+
+#endif /* __L2CAP_H */
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
new file mode 100644
index 000000000000..13669bad00b3
--- /dev/null
+++ b/include/net/bluetooth/rfcomm.h
@@ -0,0 +1,353 @@
+/* 
+   RFCOMM implementation for Linux Bluetooth stack (BlueZ).
+   Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
+   Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __RFCOMM_H
+#define __RFCOMM_H
+
+#define RFCOMM_PSM 3
+
+#define RFCOMM_CONN_TIMEOUT (HZ * 30)
+#define RFCOMM_DISC_TIMEOUT (HZ * 20)
+#define RFCOMM_AUTH_TIMEOUT (HZ * 25)
+
+#define RFCOMM_DEFAULT_MTU	127
+#define RFCOMM_DEFAULT_CREDITS	7
+
+#define RFCOMM_MAX_L2CAP_MTU	1024
+#define RFCOMM_MAX_CREDITS	40
+
+#define RFCOMM_SKB_HEAD_RESERVE	8
+#define RFCOMM_SKB_TAIL_RESERVE	2
+#define RFCOMM_SKB_RESERVE  (RFCOMM_SKB_HEAD_RESERVE + RFCOMM_SKB_TAIL_RESERVE)
+
+#define RFCOMM_SABM	0x2f
+#define RFCOMM_DISC	0x43
+#define RFCOMM_UA	0x63
+#define RFCOMM_DM	0x0f
+#define RFCOMM_UIH	0xef
+
+#define RFCOMM_TEST	0x08
+#define RFCOMM_FCON	0x28
+#define RFCOMM_FCOFF	0x18
+#define RFCOMM_MSC	0x38
+#define RFCOMM_RPN	0x24
+#define RFCOMM_RLS	0x14
+#define RFCOMM_PN	0x20
+#define RFCOMM_NSC	0x04
+
+#define RFCOMM_V24_FC	0x02
+#define RFCOMM_V24_RTC	0x04
+#define RFCOMM_V24_RTR	0x08
+#define RFCOMM_V24_IC	0x40
+#define RFCOMM_V24_DV	0x80
+
+#define RFCOMM_RPN_BR_2400	0x0
+#define RFCOMM_RPN_BR_4800	0x1
+#define RFCOMM_RPN_BR_7200	0x2
+#define RFCOMM_RPN_BR_9600	0x3
+#define RFCOMM_RPN_BR_19200	0x4
+#define RFCOMM_RPN_BR_38400	0x5
+#define RFCOMM_RPN_BR_57600	0x6
+#define RFCOMM_RPN_BR_115200	0x7
+#define RFCOMM_RPN_BR_230400	0x8
+
+#define RFCOMM_RPN_DATA_5	0x0
+#define RFCOMM_RPN_DATA_6	0x1
+#define RFCOMM_RPN_DATA_7	0x2
+#define RFCOMM_RPN_DATA_8	0x3
+
+#define RFCOMM_RPN_STOP_1	0
+#define RFCOMM_RPN_STOP_15	1
+
+#define RFCOMM_RPN_PARITY_NONE	0x0
+#define RFCOMM_RPN_PARITY_ODD	0x4
+#define RFCOMM_RPN_PARITY_EVEN	0x5
+#define RFCOMM_RPN_PARITY_MARK	0x6
+#define RFCOMM_RPN_PARITY_SPACE	0x7
+
+#define RFCOMM_RPN_FLOW_NONE	0x00
+
+#define RFCOMM_RPN_XON_CHAR	0x11
+#define RFCOMM_RPN_XOFF_CHAR	0x13
+
+#define RFCOMM_RPN_PM_BITRATE		0x0001
+#define RFCOMM_RPN_PM_DATA		0x0002
+#define RFCOMM_RPN_PM_STOP		0x0004
+#define RFCOMM_RPN_PM_PARITY		0x0008
+#define RFCOMM_RPN_PM_PARITY_TYPE	0x0010
+#define RFCOMM_RPN_PM_XON		0x0020
+#define RFCOMM_RPN_PM_XOFF		0x0040
+#define RFCOMM_RPN_PM_FLOW		0x3F00
+
+#define RFCOMM_RPN_PM_ALL		0x3F7F
+
+struct rfcomm_hdr {
+	u8 addr;
+	u8 ctrl;
+	u8 len;    // Actual size can be 2 bytes
+} __attribute__ ((packed));
+
+struct rfcomm_cmd {
+	u8 addr;
+	u8 ctrl;
+	u8 len;
+	u8 fcs;
+} __attribute__ ((packed));
+
+struct rfcomm_mcc {
+	u8 type;
+	u8 len;
+} __attribute__ ((packed));
+
+struct rfcomm_pn {
+	u8  dlci;
+	u8  flow_ctrl;
+	u8  priority;
+	u8  ack_timer;
+	u16 mtu;
+	u8  max_retrans;
+	u8  credits;
+} __attribute__ ((packed));
+
+struct rfcomm_rpn {
+	u8  dlci;
+	u8  bit_rate;
+	u8  line_settings;
+	u8  flow_ctrl;
+	u8  xon_char;
+	u8  xoff_char;
+	u16 param_mask;
+} __attribute__ ((packed));
+
+struct rfcomm_rls {
+	u8  dlci;
+	u8  status;
+} __attribute__ ((packed));
+
+struct rfcomm_msc {
+	u8  dlci;
+	u8  v24_sig;
+} __attribute__ ((packed));
+
+/* ---- Core structures, flags etc ---- */
+
+struct rfcomm_session {
+	struct list_head list;
+	struct socket   *sock;
+	unsigned long    state;
+	unsigned long    flags;
+	atomic_t         refcnt;
+	int              initiator;
+
+	/* Default DLC parameters */
+	int    cfc;
+	uint   mtu;
+
+	struct list_head dlcs;
+};
+
+struct rfcomm_dlc {
+	struct list_head      list;
+	struct rfcomm_session *session;
+	struct sk_buff_head   tx_queue;
+	struct timer_list     timer;
+
+	spinlock_t    lock;
+	unsigned long state;
+	unsigned long flags;
+	atomic_t      refcnt;
+	u8            dlci;
+	u8            addr;
+	u8            priority;
+	u8            v24_sig;
+	u8            mscex;
+
+	u32           link_mode;
+
+	uint          mtu;
+	uint          cfc;
+	uint          rx_credits;
+	uint          tx_credits;
+
+	void          *owner;
+
+	void (*data_ready)(struct rfcomm_dlc *d, struct sk_buff *skb);
+	void (*state_change)(struct rfcomm_dlc *d, int err);
+	void (*modem_status)(struct rfcomm_dlc *d, u8 v24_sig);
+};
+
+/* DLC and session flags */
+#define RFCOMM_RX_THROTTLED 0
+#define RFCOMM_TX_THROTTLED 1
+#define RFCOMM_TIMED_OUT    2
+#define RFCOMM_MSC_PENDING  3 
+#define RFCOMM_AUTH_PENDING 4
+#define RFCOMM_AUTH_ACCEPT  5
+#define RFCOMM_AUTH_REJECT  6
+
+/* Scheduling flags and events */
+#define RFCOMM_SCHED_STATE  0
+#define RFCOMM_SCHED_RX     1
+#define RFCOMM_SCHED_TX     2
+#define RFCOMM_SCHED_TIMEO  3
+#define RFCOMM_SCHED_AUTH   4
+#define RFCOMM_SCHED_WAKEUP 31
+
+/* MSC exchange flags */
+#define RFCOMM_MSCEX_TX     1
+#define RFCOMM_MSCEX_RX     2
+#define RFCOMM_MSCEX_OK     (RFCOMM_MSCEX_TX + RFCOMM_MSCEX_RX)
+
+/* CFC states */
+#define RFCOMM_CFC_UNKNOWN  -1
+#define RFCOMM_CFC_DISABLED 0
+#define RFCOMM_CFC_ENABLED  RFCOMM_MAX_CREDITS
+
+/* ---- RFCOMM DLCs (channels) ---- */
+struct rfcomm_dlc *rfcomm_dlc_alloc(int prio);
+void rfcomm_dlc_free(struct rfcomm_dlc *d);
+int  rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst, u8 channel);
+int  rfcomm_dlc_close(struct rfcomm_dlc *d, int reason);
+int  rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb);
+int  rfcomm_dlc_set_modem_status(struct rfcomm_dlc *d, u8 v24_sig);
+int  rfcomm_dlc_get_modem_status(struct rfcomm_dlc *d, u8 *v24_sig);
+
+#define rfcomm_dlc_lock(d)     spin_lock(&d->lock)
+#define rfcomm_dlc_unlock(d)   spin_unlock(&d->lock)
+
+static inline void rfcomm_dlc_hold(struct rfcomm_dlc *d)
+{
+	atomic_inc(&d->refcnt);
+}
+
+static inline void rfcomm_dlc_put(struct rfcomm_dlc *d)
+{
+	if (atomic_dec_and_test(&d->refcnt))
+		rfcomm_dlc_free(d);
+}
+
+extern void FASTCALL(__rfcomm_dlc_throttle(struct rfcomm_dlc *d));
+extern void FASTCALL(__rfcomm_dlc_unthrottle(struct rfcomm_dlc *d));
+
+static inline void rfcomm_dlc_throttle(struct rfcomm_dlc *d)
+{
+	if (!test_and_set_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_throttle(d);
+}
+
+static inline void rfcomm_dlc_unthrottle(struct rfcomm_dlc *d)
+{
+	if (test_and_clear_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_unthrottle(d);
+}
+
+/* ---- RFCOMM sessions ---- */
+void   rfcomm_session_getaddr(struct rfcomm_session *s, bdaddr_t *src, bdaddr_t *dst);
+
+static inline void rfcomm_session_hold(struct rfcomm_session *s)
+{
+	atomic_inc(&s->refcnt);
+}
+
+/* ---- RFCOMM chechsum ---- */
+extern u8 rfcomm_crc_table[];
+
+/* ---- RFCOMM sockets ---- */
+struct sockaddr_rc {
+	sa_family_t	rc_family;
+	bdaddr_t	rc_bdaddr;
+	u8		rc_channel;
+};
+
+#define RFCOMM_CONNINFO	0x02
+struct rfcomm_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define RFCOMM_LM	0x03
+#define RFCOMM_LM_MASTER	0x0001
+#define RFCOMM_LM_AUTH		0x0002
+#define RFCOMM_LM_ENCRYPT	0x0004
+#define RFCOMM_LM_TRUSTED	0x0008
+#define RFCOMM_LM_RELIABLE	0x0010
+#define RFCOMM_LM_SECURE	0x0020
+
+#define rfcomm_pi(sk) ((struct rfcomm_pinfo *) sk)
+
+struct rfcomm_pinfo {
+	struct bt_sock bt;
+	struct rfcomm_dlc   *dlc;
+	u8     channel;
+	u32    link_mode;
+};
+
+int  rfcomm_init_sockets(void);
+void rfcomm_cleanup_sockets(void);
+
+int  rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc **d);
+
+/* ---- RFCOMM TTY ---- */
+#define RFCOMM_MAX_DEV  256
+
+#define RFCOMMCREATEDEV		_IOW('R', 200, int)
+#define RFCOMMRELEASEDEV	_IOW('R', 201, int)
+#define RFCOMMGETDEVLIST	_IOR('R', 210, int)
+#define RFCOMMGETDEVINFO	_IOR('R', 211, int)
+#define RFCOMMSTEALDLC		_IOW('R', 220, int)
+
+#define RFCOMM_REUSE_DLC      0
+#define RFCOMM_RELEASE_ONHUP  1
+#define RFCOMM_HANGUP_NOW     2
+#define RFCOMM_TTY_ATTACHED   3
+
+struct rfcomm_dev_req {
+	s16      dev_id;
+	u32      flags;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+	
+};
+
+struct rfcomm_dev_info {
+	s16      id;
+	u32      flags;
+	u16      state;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+};
+
+struct rfcomm_dev_list_req {
+	u16      dev_num;
+	struct   rfcomm_dev_info dev_info[0];
+};
+
+int  rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+int  rfcomm_init_ttys(void);
+void rfcomm_cleanup_ttys(void);
+
+extern struct proc_dir_entry *proc_bt_rfcomm;
+
+#endif /* __RFCOMM_H */
diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
new file mode 100644
index 000000000000..e28a2a771471
--- /dev/null
+++ b/include/net/bluetooth/sco.h
@@ -0,0 +1,79 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __SCO_H
+#define __SCO_H
+
+/* SCO defaults */
+#define SCO_DEFAULT_MTU		500
+#define SCO_DEFAULT_FLUSH_TO	0xFFFF
+
+#define SCO_CONN_TIMEOUT	(HZ * 40)
+#define SCO_DISCONN_TIMEOUT	(HZ * 2)
+#define SCO_CONN_IDLE_TIMEOUT	(HZ * 60)
+
+/* SCO socket address */
+struct sockaddr_sco {
+	sa_family_t	sco_family;
+	bdaddr_t	sco_bdaddr;
+};
+
+/* SCO socket options */
+#define SCO_OPTIONS	0x01
+struct sco_options {
+	__u16 mtu;
+};
+
+#define SCO_CONNINFO	0x02
+struct sco_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+/* ---- SCO connections ---- */
+struct sco_conn {
+	struct hci_conn	*hcon;
+
+	bdaddr_t 	*dst;
+	bdaddr_t 	*src;
+	
+	spinlock_t	lock;
+	struct sock 	*sk;
+
+	unsigned int    mtu;
+};
+
+#define sco_conn_lock(c)	spin_lock(&c->lock);
+#define sco_conn_unlock(c)	spin_unlock(&c->lock);
+
+/* ----- SCO socket info ----- */
+#define sco_pi(sk) ((struct sco_pinfo *) sk)
+
+struct sco_pinfo {
+	struct bt_sock	bt;
+	__u32		flags;
+	struct sco_conn	*conn;
+};
+
+#endif /* __SCO_H */
diff --git a/include/net/checksum.h b/include/net/checksum.h
new file mode 100644
index 000000000000..e3ea7cc2c728
--- /dev/null
+++ b/include/net/checksum.h
@@ -0,0 +1,87 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Checksumming functions for IP, TCP, UDP and so on
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Borrows very liberally from tcp.c and ip.c, see those
+ *		files for more names.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _CHECKSUM_H
+#define _CHECKSUM_H
+
+#include <linux/errno.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+
+#ifndef _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
+static inline
+unsigned int csum_and_copy_from_user (const unsigned char __user *src, unsigned char *dst,
+				      int len, int sum, int *err_ptr)
+{
+	if (access_ok(VERIFY_READ, src, len))
+		return csum_partial_copy_from_user(src, dst, len, sum, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return sum;
+}
+#endif
+
+#ifndef HAVE_CSUM_COPY_USER
+static __inline__ unsigned int csum_and_copy_to_user
+(const unsigned char *src, unsigned char __user *dst, int len, unsigned int sum, int *err_ptr)
+{
+	sum = csum_partial(src, len, sum);
+
+	if (access_ok(VERIFY_WRITE, dst, len)) {
+		if (copy_to_user(dst, src, len) == 0)
+			return sum;
+	}
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return -1; /* invalid checksum */
+}
+#endif
+
+static inline unsigned int csum_add(unsigned int csum, unsigned int addend)
+{
+	csum += addend;
+	return csum + (csum < addend);
+}
+
+static inline unsigned int csum_sub(unsigned int csum, unsigned int addend)
+{
+	return csum_add(csum, ~addend);
+}
+
+static inline unsigned int
+csum_block_add(unsigned int csum, unsigned int csum2, int offset)
+{
+	if (offset&1)
+		csum2 = ((csum2&0xFF00FF)<<8)+((csum2>>8)&0xFF00FF);
+	return csum_add(csum, csum2);
+}
+
+static inline unsigned int
+csum_block_sub(unsigned int csum, unsigned int csum2, int offset)
+{
+	if (offset&1)
+		csum2 = ((csum2&0xFF00FF)<<8)+((csum2>>8)&0xFF00FF);
+	return csum_sub(csum, csum2);
+}
+
+#endif
diff --git a/include/net/compat.h b/include/net/compat.h
new file mode 100644
index 000000000000..9983fd857804
--- /dev/null
+++ b/include/net/compat.h
@@ -0,0 +1,39 @@
+#ifndef NET_COMPAT_H
+#define NET_COMPAT_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_COMPAT)
+
+#include <linux/compat.h>
+
+struct compat_msghdr {
+	compat_uptr_t	msg_name;	/* void * */
+	compat_int_t	msg_namelen;
+	compat_uptr_t	msg_iov;	/* struct compat_iovec * */
+	compat_size_t	msg_iovlen;
+	compat_uptr_t	msg_control;	/* void * */
+	compat_size_t	msg_controllen;
+	compat_uint_t	msg_flags;
+};
+
+struct compat_cmsghdr {
+	compat_size_t	cmsg_len;
+	compat_int_t	cmsg_level;
+	compat_int_t	cmsg_type;
+};
+
+#else /* defined(CONFIG_COMPAT) */
+#define compat_msghdr	msghdr		/* to avoid compiler warnings */
+#endif /* defined(CONFIG_COMPAT) */
+
+extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
+extern int verify_compat_iovec(struct msghdr *, struct iovec *, char *, int);
+extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_getsockopt(int, int, int, char __user *, int __user *);
+extern int put_cmsg_compat(struct msghdr*, int, int, int, void *);
+extern int cmsghdr_from_user_compat_to_kern(struct msghdr *, unsigned char *,
+		int);
+
+#endif /* NET_COMPAT_H */
diff --git a/include/net/datalink.h b/include/net/datalink.h
new file mode 100644
index 000000000000..5797ba3d2eb5
--- /dev/null
+++ b/include/net/datalink.h
@@ -0,0 +1,18 @@
+#ifndef _NET_INET_DATALINK_H_
+#define _NET_INET_DATALINK_H_
+
+struct datalink_proto {
+        unsigned char   type[8];
+
+	struct llc_sap   *sap;
+
+        unsigned short  header_length;
+
+        int     (*rcvfunc)(struct sk_buff *, struct net_device *,
+                                struct packet_type *);
+	int     (*request)(struct datalink_proto *, struct sk_buff *,
+                                        unsigned char *);
+	struct list_head node;
+};
+
+#endif
diff --git a/include/net/dn.h b/include/net/dn.h
new file mode 100644
index 000000000000..5551c46db397
--- /dev/null
+++ b/include/net/dn.h
@@ -0,0 +1,236 @@
+#ifndef _NET_DN_H
+#define _NET_DN_H
+
+#include <linux/dn.h>
+#include <net/sock.h>
+#include <asm/byteorder.h>
+
+typedef unsigned short dn_address;
+
+#define dn_ntohs(x) le16_to_cpu((unsigned short)(x))
+#define dn_htons(x) cpu_to_le16((unsigned short)(x))
+
+struct dn_scp                                   /* Session Control Port */
+{
+        unsigned char           state;
+#define DN_O     1                      /* Open                 */
+#define DN_CR    2                      /* Connect Receive      */
+#define DN_DR    3                      /* Disconnect Reject    */
+#define DN_DRC   4                      /* Discon. Rej. Complete*/
+#define DN_CC    5                      /* Connect Confirm      */
+#define DN_CI    6                      /* Connect Initiate     */
+#define DN_NR    7                      /* No resources         */
+#define DN_NC    8                      /* No communication     */
+#define DN_CD    9                      /* Connect Delivery     */
+#define DN_RJ    10                     /* Rejected             */
+#define DN_RUN   11                     /* Running              */
+#define DN_DI    12                     /* Disconnect Initiate  */
+#define DN_DIC   13                     /* Disconnect Complete  */
+#define DN_DN    14                     /* Disconnect Notificat */
+#define DN_CL    15                     /* Closed               */
+#define DN_CN    16                     /* Closed Notification  */
+
+        unsigned short          addrloc;
+        unsigned short          addrrem;
+        unsigned short          numdat;
+        unsigned short          numoth;
+        unsigned short          numoth_rcv;
+        unsigned short          numdat_rcv;
+        unsigned short          ackxmt_dat;
+        unsigned short          ackxmt_oth;
+        unsigned short          ackrcv_dat;
+        unsigned short          ackrcv_oth;
+        unsigned char           flowrem_sw;
+	unsigned char		flowloc_sw;
+#define DN_SEND         2
+#define DN_DONTSEND     1
+#define DN_NOCHANGE     0
+	unsigned short		flowrem_dat;
+	unsigned short		flowrem_oth;
+	unsigned short		flowloc_dat;
+	unsigned short		flowloc_oth;
+	unsigned char		services_rem;
+	unsigned char		services_loc;
+	unsigned char		info_rem;
+	unsigned char		info_loc;
+
+	unsigned short		segsize_rem;
+	unsigned short		segsize_loc;
+
+	unsigned char		nonagle;
+	unsigned char		multi_ireq;
+	unsigned char		accept_mode;
+	unsigned long		seg_total; /* Running total of current segment */
+
+	struct optdata_dn     conndata_in;
+	struct optdata_dn     conndata_out;
+	struct optdata_dn     discdata_in;
+	struct optdata_dn     discdata_out;
+        struct accessdata_dn  accessdata;
+
+        struct sockaddr_dn addr; /* Local address  */
+	struct sockaddr_dn peer; /* Remote address */
+
+	/*
+	 * In this case the RTT estimation is not specified in the
+	 * docs, nor is any back off algorithm. Here we follow well
+	 * known tcp algorithms with a few small variations.
+	 *
+	 * snd_window: Max number of packets we send before we wait for
+	 *             an ack to come back. This will become part of a
+	 *             more complicated scheme when we support flow
+	 *             control.
+	 *
+	 * nsp_srtt:   Round-Trip-Time (x8) in jiffies. This is a rolling
+	 *             average.
+	 * nsp_rttvar: Round-Trip-Time-Varience (x4) in jiffies. This is the
+	 *             varience of the smoothed average (but calculated in
+	 *             a simpler way than for normal statistical varience
+	 *             calculations).
+	 *
+	 * nsp_rxtshift: Backoff counter. Value is zero normally, each time
+	 *               a packet is lost is increases by one until an ack
+	 *               is received. Its used to index an array of backoff
+	 *               multipliers.
+	 */
+#define NSP_MIN_WINDOW 1
+#define NSP_MAX_WINDOW (0x07fe)
+	unsigned long max_window;
+	unsigned long snd_window;
+#define NSP_INITIAL_SRTT (HZ)
+	unsigned long nsp_srtt;
+#define NSP_INITIAL_RTTVAR (HZ*3)
+	unsigned long nsp_rttvar;
+#define NSP_MAXRXTSHIFT 12
+	unsigned long nsp_rxtshift;
+
+	/*
+	 * Output queues, one for data, one for otherdata/linkservice
+	 */
+	struct sk_buff_head data_xmit_queue;
+	struct sk_buff_head other_xmit_queue;
+
+	/*
+	 * Input queue for other data
+	 */
+	struct sk_buff_head other_receive_queue;
+	int other_report;
+
+	/*
+	 * Stuff to do with the slow timer
+	 */
+	unsigned long stamp;          /* time of last transmit */
+	unsigned long persist;
+	int (*persist_fxn)(struct sock *sk);
+	unsigned long keepalive;
+	void (*keepalive_fxn)(struct sock *sk);
+
+	/*
+	 * This stuff is for the fast timer for delayed acks
+	 */
+	struct timer_list delack_timer;
+	int delack_pending;
+	void (*delack_fxn)(struct sock *sk);
+
+};
+
+static inline struct dn_scp *DN_SK(struct sock *sk)
+{
+	return (struct dn_scp *)(sk + 1);
+}
+
+/*
+ * src,dst : Source and Destination DECnet addresses
+ * hops : Number of hops through the network
+ * dst_port, src_port : NSP port numbers
+ * services, info : Useful data extracted from conninit messages
+ * rt_flags : Routing flags byte
+ * nsp_flags : NSP layer flags byte
+ * segsize : Size of segment
+ * segnum : Number, for data, otherdata and linkservice
+ * xmit_count : Number of times we've transmitted this skb
+ * stamp : Time stamp of most recent transmission, used in RTT calculations
+ * iif: Input interface number
+ *
+ * As a general policy, this structure keeps all addresses in network
+ * byte order, and all else in host byte order. Thus dst, src, dst_port
+ * and src_port are in network order. All else is in host order.
+ * 
+ */
+#define DN_SKB_CB(skb) ((struct dn_skb_cb *)(skb)->cb)
+struct dn_skb_cb {
+	unsigned short dst;
+	unsigned short src;
+	unsigned short hops;
+	unsigned short dst_port;
+	unsigned short src_port;
+	unsigned char services;
+	unsigned char info;
+	unsigned char rt_flags;
+	unsigned char nsp_flags;
+	unsigned short segsize;
+	unsigned short segnum;
+	unsigned short xmit_count;
+	unsigned long stamp;
+	int iif;
+};
+
+static inline dn_address dn_eth2dn(unsigned char *ethaddr)
+{
+	return ethaddr[4] | (ethaddr[5] << 8);
+}
+
+static inline dn_address dn_saddr2dn(struct sockaddr_dn *saddr)
+{
+	return *(dn_address *)saddr->sdn_nodeaddr;
+}
+
+static inline void dn_dn2eth(unsigned char *ethaddr, dn_address addr)
+{
+	ethaddr[0] = 0xAA;
+	ethaddr[1] = 0x00;
+	ethaddr[2] = 0x04;
+	ethaddr[3] = 0x00;
+	ethaddr[4] = (unsigned char)(addr & 0xff);
+	ethaddr[5] = (unsigned char)(addr >> 8);
+}
+
+static inline void dn_sk_ports_copy(struct flowi *fl, struct dn_scp *scp)
+{
+	fl->uli_u.dnports.sport = scp->addrloc;
+	fl->uli_u.dnports.dport = scp->addrrem;
+	fl->uli_u.dnports.objnum = scp->addr.sdn_objnum;
+	if (fl->uli_u.dnports.objnum == 0) {
+		fl->uli_u.dnports.objnamel = scp->addr.sdn_objnamel;
+		memcpy(fl->uli_u.dnports.objname, scp->addr.sdn_objname, 16);
+	}
+}
+
+extern unsigned dn_mss_from_pmtu(struct net_device *dev, int mtu);
+
+#define DN_MENUVER_ACC 0x01
+#define DN_MENUVER_USR 0x02
+#define DN_MENUVER_PRX 0x04
+#define DN_MENUVER_UIC 0x08
+
+extern struct sock *dn_sklist_find_listener(struct sockaddr_dn *addr);
+extern struct sock *dn_find_by_skb(struct sk_buff *skb);
+#define DN_ASCBUF_LEN 9
+extern char *dn_addr2asc(dn_address, char *);
+extern int dn_destroy_timer(struct sock *sk);
+
+extern int dn_sockaddr2username(struct sockaddr_dn *addr, unsigned char *buf, unsigned char type);
+extern int dn_username2sockaddr(unsigned char *data, int len, struct sockaddr_dn *addr, unsigned char *type);
+
+extern void dn_start_slow_timer(struct sock *sk);
+extern void dn_stop_slow_timer(struct sock *sk);
+
+extern dn_address decnet_address;
+extern int decnet_debug_level;
+extern int decnet_time_wait;
+extern int decnet_dn_count;
+extern int decnet_di_count;
+extern int decnet_dr_count;
+extern int decnet_no_fc_max_cwnd;
+
+#endif /* _NET_DN_H */
diff --git a/include/net/dn_dev.h b/include/net/dn_dev.h
new file mode 100644
index 000000000000..86e8e86e624a
--- /dev/null
+++ b/include/net/dn_dev.h
@@ -0,0 +1,194 @@
+#ifndef _NET_DN_DEV_H
+#define _NET_DN_DEV_H
+
+
+struct dn_dev;
+
+struct dn_ifaddr {
+	struct dn_ifaddr *ifa_next;
+	struct dn_dev    *ifa_dev;
+	dn_address       ifa_local;
+	dn_address       ifa_address;
+	unsigned char    ifa_flags;
+	unsigned char    ifa_scope;
+	char             ifa_label[IFNAMSIZ];
+};
+
+#define DN_DEV_S_RU  0 /* Run - working normally   */
+#define DN_DEV_S_CR  1 /* Circuit Rejected         */
+#define DN_DEV_S_DS  2 /* Data Link Start          */
+#define DN_DEV_S_RI  3 /* Routing Layer Initialize */
+#define DN_DEV_S_RV  4 /* Routing Layer Verify     */
+#define DN_DEV_S_RC  5 /* Routing Layer Complete   */
+#define DN_DEV_S_OF  6 /* Off                      */
+#define DN_DEV_S_HA  7 /* Halt                     */
+
+
+/*
+ * The dn_dev_parms structure contains the set of parameters
+ * for each device (hence inclusion in the dn_dev structure)
+ * and an array is used to store the default types of supported
+ * device (in dn_dev.c).
+ *
+ * The type field matches the ARPHRD_ constants and is used in
+ * searching the list for supported devices when new devices
+ * come up.
+ *
+ * The mode field is used to find out if a device is broadcast,
+ * multipoint, or pointopoint. Please note that DECnet thinks
+ * different ways about devices to the rest of the kernel
+ * so the normal IFF_xxx flags are invalid here. For devices
+ * which can be any combination of the previously mentioned
+ * attributes, you can set this on a per device basis by
+ * installing an up() routine.
+ *
+ * The device state field, defines the initial state in which the
+ * device will come up. In the dn_dev structure, it is the actual
+ * state.
+ *
+ * Things have changed here. I've killed timer1 since it's a user space
+ * issue for a user space routing deamon to sort out. The kernel does
+ * not need to be bothered with it.
+ *
+ * Timers:
+ * t2 - Rate limit timer, min time between routing and hello messages
+ * t3 - Hello timer, send hello messages when it expires
+ *
+ * Callbacks:
+ * up() - Called to initialize device, return value can veto use of
+ *        device with DECnet.
+ * down() - Called to turn device off when it goes down
+ * timer3() - Called once for each ifaddr when timer 3 goes off
+ * 
+ * sysctl - Hook for sysctl things
+ *
+ */
+struct dn_dev_parms {
+	int type;	          /* ARPHRD_xxx                         */
+	int mode;	          /* Broadcast, Unicast, Mulitpoint     */
+#define DN_DEV_BCAST  1
+#define DN_DEV_UCAST  2
+#define DN_DEV_MPOINT 4
+	int state;                /* Initial state                      */
+	int forwarding;	          /* 0=EndNode, 1=L1Router, 2=L2Router  */
+	unsigned long t2;         /* Default value of t2                */
+	unsigned long t3;         /* Default value of t3                */
+	int priority;             /* Priority to be a router            */
+	char *name;               /* Name for sysctl                    */
+	int ctl_name;             /* Index for sysctl                   */
+	int  (*up)(struct net_device *);
+	void (*down)(struct net_device *);
+	void (*timer3)(struct net_device *, struct dn_ifaddr *ifa);
+	void *sysctl;
+};
+
+
+struct dn_dev {
+	struct dn_ifaddr *ifa_list;
+	struct net_device *dev;
+	struct dn_dev_parms parms;
+	char use_long;
+        struct timer_list timer;
+        unsigned long t3;
+	struct neigh_parms *neigh_parms;
+	unsigned char addr[ETH_ALEN];
+	struct neighbour *router; /* Default router on circuit */
+	struct neighbour *peer;   /* Peer on pointopoint links */
+	unsigned long uptime;     /* Time device went up in jiffies */
+};
+
+struct dn_short_packet
+{
+	unsigned char   msgflg          __attribute__((packed));
+        unsigned short  dstnode         __attribute__((packed));
+        unsigned short  srcnode         __attribute__((packed));
+        unsigned char   forward         __attribute__((packed));
+};
+
+struct dn_long_packet
+{
+	unsigned char   msgflg          __attribute__((packed));
+        unsigned char   d_area          __attribute__((packed));
+        unsigned char   d_subarea       __attribute__((packed));
+        unsigned char   d_id[6]         __attribute__((packed));
+        unsigned char   s_area          __attribute__((packed));
+        unsigned char   s_subarea       __attribute__((packed));
+        unsigned char   s_id[6]         __attribute__((packed));
+        unsigned char   nl2             __attribute__((packed));
+        unsigned char   visit_ct        __attribute__((packed));
+        unsigned char   s_class         __attribute__((packed));
+        unsigned char   pt              __attribute__((packed));
+};
+
+/*------------------------- DRP - Routing messages ---------------------*/
+
+struct endnode_hello_message
+{
+	unsigned char   msgflg          __attribute__((packed));
+        unsigned char   tiver[3]        __attribute__((packed));
+        unsigned char   id[6]           __attribute__((packed));
+        unsigned char   iinfo           __attribute__((packed));
+        unsigned short  blksize         __attribute__((packed));
+        unsigned char   area            __attribute__((packed));
+        unsigned char   seed[8]         __attribute__((packed));
+        unsigned char   neighbor[6]     __attribute__((packed));
+        unsigned short  timer           __attribute__((packed));
+        unsigned char   mpd             __attribute__((packed));
+        unsigned char   datalen         __attribute__((packed));
+        unsigned char   data[2]         __attribute__((packed));
+};
+
+struct rtnode_hello_message
+{
+	unsigned char   msgflg          __attribute__((packed));
+        unsigned char   tiver[3]        __attribute__((packed));
+        unsigned char   id[6]           __attribute__((packed));
+        unsigned char   iinfo           __attribute__((packed));
+        unsigned short  blksize         __attribute__((packed));
+        unsigned char   priority        __attribute__((packed));
+        unsigned char   area            __attribute__((packed));
+        unsigned short  timer           __attribute__((packed));
+        unsigned char   mpd             __attribute__((packed));
+};
+
+
+extern void dn_dev_init(void);
+extern void dn_dev_cleanup(void);
+
+extern int dn_dev_ioctl(unsigned int cmd, void __user *arg);
+
+extern void dn_dev_devices_off(void);
+extern void dn_dev_devices_on(void);
+
+extern void dn_dev_init_pkt(struct sk_buff *skb);
+extern void dn_dev_veri_pkt(struct sk_buff *skb);
+extern void dn_dev_hello(struct sk_buff *skb);
+
+extern void dn_dev_up(struct net_device *);
+extern void dn_dev_down(struct net_device *);
+
+extern int dn_dev_set_default(struct net_device *dev, int force);
+extern struct net_device *dn_dev_get_default(void);
+extern int dn_dev_bind_default(dn_address *addr);
+
+extern int register_dnaddr_notifier(struct notifier_block *nb);
+extern int unregister_dnaddr_notifier(struct notifier_block *nb);
+
+static inline int dn_dev_islocal(struct net_device *dev, dn_address addr)
+{
+	struct dn_dev *dn_db = dev->dn_ptr;
+	struct dn_ifaddr *ifa;
+
+	if (dn_db == NULL) {
+		printk(KERN_DEBUG "dn_dev_islocal: Called for non DECnet device\n");
+		return 0;
+	}
+
+	for(ifa = dn_db->ifa_list; ifa; ifa = ifa->ifa_next)
+		if ((addr ^ ifa->ifa_local) == 0)
+			return 1;
+
+	return 0;
+}
+
+#endif /* _NET_DN_DEV_H */
diff --git a/include/net/dn_fib.h b/include/net/dn_fib.h
new file mode 100644
index 000000000000..cd3c96d9601b
--- /dev/null
+++ b/include/net/dn_fib.h
@@ -0,0 +1,204 @@
+#ifndef _NET_DN_FIB_H
+#define _NET_DN_FIB_H
+
+/* WARNING: The ordering of these elements must match ordering
+ *          of RTA_* rtnetlink attribute numbers.
+ */
+struct dn_kern_rta
+{
+        void            *rta_dst;
+        void            *rta_src;
+        int             *rta_iif;
+        int             *rta_oif;
+        void            *rta_gw;
+        u32             *rta_priority;
+        void            *rta_prefsrc;
+        struct rtattr   *rta_mx;
+        struct rtattr   *rta_mp;
+        unsigned char   *rta_protoinfo;
+        u32             *rta_flow;
+        struct rta_cacheinfo *rta_ci;
+	struct rta_session *rta_sess;
+};
+
+struct dn_fib_res {
+	struct dn_fib_rule *r;
+	struct dn_fib_info *fi;
+	unsigned char prefixlen;
+	unsigned char nh_sel;
+	unsigned char type;
+	unsigned char scope;
+};
+
+struct dn_fib_nh {
+	struct net_device	*nh_dev;
+	unsigned		nh_flags;
+	unsigned char		nh_scope;
+	int			nh_weight;
+	int			nh_power;
+	int			nh_oif;
+	u32			nh_gw;
+};
+
+struct dn_fib_info {
+	struct dn_fib_info	*fib_next;
+	struct dn_fib_info	*fib_prev;
+	int 			fib_treeref;
+	atomic_t		fib_clntref;
+	int			fib_dead;
+	unsigned		fib_flags;
+	int			fib_protocol;
+	dn_address		fib_prefsrc;
+	__u32			fib_priority;
+	__u32			fib_metrics[RTAX_MAX];
+#define dn_fib_mtu  fib_metrics[RTAX_MTU-1]
+#define dn_fib_window fib_metrics[RTAX_WINDOW-1]
+#define dn_fib_rtt fib_metrics[RTAX_RTT-1]
+#define dn_fib_advmss fib_metrics[RTAX_ADVMSS-1]
+	int			fib_nhs;
+	int			fib_power;
+	struct dn_fib_nh	fib_nh[0];
+#define dn_fib_dev		fib_nh[0].nh_dev
+};
+
+
+#define DN_FIB_RES_RESET(res)	((res).nh_sel = 0)
+#define DN_FIB_RES_NH(res)	((res).fi->fib_nh[(res).nh_sel])
+
+#define DN_FIB_RES_PREFSRC(res)	((res).fi->fib_prefsrc ? : __dn_fib_res_prefsrc(&res))
+#define DN_FIB_RES_GW(res)	(DN_FIB_RES_NH(res).nh_gw)
+#define DN_FIB_RES_DEV(res)	(DN_FIB_RES_NH(res).nh_dev)
+#define DN_FIB_RES_OIF(res)	(DN_FIB_RES_NH(res).nh_oif)
+
+typedef struct {
+	u16	datum;
+} dn_fib_key_t;
+
+typedef struct {
+	u16	datum;
+} dn_fib_hash_t;
+
+typedef struct {
+	u16	datum;
+} dn_fib_idx_t;
+
+struct dn_fib_node {
+	struct dn_fib_node *fn_next;
+	struct dn_fib_info *fn_info;
+#define DN_FIB_INFO(f) ((f)->fn_info)
+	dn_fib_key_t	fn_key;
+	u8		fn_type;
+	u8		fn_scope;
+	u8		fn_state;
+};
+
+
+struct dn_fib_table {
+	int n;
+
+	int (*insert)(struct dn_fib_table *t, struct rtmsg *r, 
+			struct dn_kern_rta *rta, struct nlmsghdr *n, 
+			struct netlink_skb_parms *req);
+	int (*delete)(struct dn_fib_table *t, struct rtmsg *r,
+			struct dn_kern_rta *rta, struct nlmsghdr *n,
+			struct netlink_skb_parms *req);
+	int (*lookup)(struct dn_fib_table *t, const struct flowi *fl,
+			struct dn_fib_res *res);
+	int (*flush)(struct dn_fib_table *t);
+	int (*dump)(struct dn_fib_table *t, struct sk_buff *skb, struct netlink_callback *cb);
+
+	unsigned char data[0];
+};
+
+#ifdef CONFIG_DECNET_ROUTER
+/*
+ * dn_fib.c
+ */
+extern void dn_fib_init(void);
+extern void dn_fib_cleanup(void);
+
+extern int dn_fib_ioctl(struct socket *sock, unsigned int cmd, 
+			unsigned long arg);
+extern struct dn_fib_info *dn_fib_create_info(const struct rtmsg *r, 
+				struct dn_kern_rta *rta, 
+				const struct nlmsghdr *nlh, int *errp);
+extern int dn_fib_semantic_match(int type, struct dn_fib_info *fi, 
+			const struct flowi *fl,
+			struct dn_fib_res *res);
+extern void dn_fib_release_info(struct dn_fib_info *fi);
+extern u16 dn_fib_get_attr16(struct rtattr *attr, int attrlen, int type);
+extern void dn_fib_flush(void);
+extern void dn_fib_select_multipath(const struct flowi *fl,
+					struct dn_fib_res *res);
+extern int dn_fib_sync_down(dn_address local, struct net_device *dev, 
+				int force);
+extern int dn_fib_sync_up(struct net_device *dev);
+
+/*
+ * dn_tables.c
+ */
+extern struct dn_fib_table *dn_fib_get_table(int n, int creat);
+extern struct dn_fib_table *dn_fib_empty_table(void);
+extern void dn_fib_table_init(void);
+extern void dn_fib_table_cleanup(void);
+
+/*
+ * dn_rules.c
+ */
+extern void dn_fib_rules_init(void);
+extern void dn_fib_rules_cleanup(void);
+extern void dn_fib_rule_put(struct dn_fib_rule *);
+extern __u16 dn_fib_rules_policy(__u16 saddr, struct dn_fib_res *res, unsigned *flags);
+extern unsigned dnet_addr_type(__u16 addr);
+extern int dn_fib_lookup(const struct flowi *fl, struct dn_fib_res *res);
+
+/*
+ * rtnetlink interface
+ */
+extern int dn_fib_rtm_delroute(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int dn_fib_rtm_newroute(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int dn_fib_dump(struct sk_buff *skb, struct netlink_callback *cb);
+
+extern int dn_fib_rtm_delrule(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int dn_fib_rtm_newrule(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int dn_fib_dump_rules(struct sk_buff *skb, struct netlink_callback *cb);
+
+extern void dn_fib_free_info(struct dn_fib_info *fi);
+
+static inline void dn_fib_info_put(struct dn_fib_info *fi)
+{
+	if (atomic_dec_and_test(&fi->fib_clntref))
+		dn_fib_free_info(fi);
+}
+
+static inline void dn_fib_res_put(struct dn_fib_res *res)
+{
+	if (res->fi)
+		dn_fib_info_put(res->fi);
+	if (res->r)
+		dn_fib_rule_put(res->r);
+}
+
+extern struct dn_fib_table *dn_fib_tables[];
+
+#else /* Endnode */
+
+#define dn_fib_init()  do { } while(0)
+#define dn_fib_cleanup() do { } while(0)
+
+#define dn_fib_lookup(fl, res) (-ESRCH)
+#define dn_fib_info_put(fi) do { } while(0)
+#define dn_fib_select_multipath(fl, res) do { } while(0)
+#define dn_fib_rules_policy(saddr,res,flags) (0)
+#define dn_fib_res_put(res) do { } while(0)
+
+#endif /* CONFIG_DECNET_ROUTER */
+
+static inline u16 dnet_make_mask(int n)
+{
+        if (n)
+                return htons(~((1<<(16-n))-1));
+        return 0;
+}
+
+#endif /* _NET_DN_FIB_H */
diff --git a/include/net/dn_neigh.h b/include/net/dn_neigh.h
new file mode 100644
index 000000000000..4b1eb038d637
--- /dev/null
+++ b/include/net/dn_neigh.h
@@ -0,0 +1,28 @@
+#ifndef _NET_DN_NEIGH_H
+#define _NET_DN_NEIGH_H
+
+/*
+ * The position of the first two fields of
+ * this structure are critical - SJW
+ */
+struct dn_neigh {
+        struct neighbour n;
+	dn_address addr;
+        unsigned long flags;
+#define DN_NDFLAG_R1    0x0001 /* Router L1      */
+#define DN_NDFLAG_R2    0x0002 /* Router L2      */
+#define DN_NDFLAG_P3    0x0004 /* Phase III Node */
+        unsigned long blksize;
+	unsigned char priority;
+};
+
+extern void dn_neigh_init(void);
+extern void dn_neigh_cleanup(void);
+extern int dn_neigh_router_hello(struct sk_buff *skb);
+extern int dn_neigh_endnode_hello(struct sk_buff *skb);
+extern void dn_neigh_pointopoint_hello(struct sk_buff *skb);
+extern int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n);
+
+extern struct neigh_table dn_neigh_table;
+
+#endif /* _NET_DN_NEIGH_H */
diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h
new file mode 100644
index 000000000000..6bbeafa73e8b
--- /dev/null
+++ b/include/net/dn_nsp.h
@@ -0,0 +1,209 @@
+#ifndef _NET_DN_NSP_H
+#define _NET_DN_NSP_H
+/******************************************************************************
+    (c) 1995-1998 E.M. Serrat		emserrat@geocities.com
+    
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*******************************************************************************/
+/* dn_nsp.c functions prototyping */
+
+extern void dn_nsp_send_data_ack(struct sock *sk);
+extern void dn_nsp_send_oth_ack(struct sock *sk);
+extern void dn_nsp_delayed_ack(struct sock *sk);
+extern void dn_send_conn_ack(struct sock *sk);
+extern void dn_send_conn_conf(struct sock *sk, int gfp);
+extern void dn_nsp_send_disc(struct sock *sk, unsigned char type, 
+				unsigned short reason, int gfp);
+extern void dn_nsp_return_disc(struct sk_buff *skb, unsigned char type,
+				unsigned short reason);
+extern void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval);
+extern void dn_nsp_send_conninit(struct sock *sk, unsigned char flags);
+
+extern void dn_nsp_output(struct sock *sk);
+extern int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff_head *q, unsigned short acknum);
+extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, int gfp, int oob);
+extern unsigned long dn_nsp_persist(struct sock *sk);
+extern int dn_nsp_xmit_timeout(struct sock *sk);
+
+extern int dn_nsp_rx(struct sk_buff *);
+extern int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
+
+extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, int pri);
+extern struct sk_buff *dn_alloc_send_skb(struct sock *sk, size_t *size, int noblock, long timeo, int *err);
+
+#define NSP_REASON_OK 0		/* No error */
+#define NSP_REASON_NR 1		/* No resources */
+#define NSP_REASON_UN 2		/* Unrecognised node name */
+#define NSP_REASON_SD 3		/* Node shutting down */
+#define NSP_REASON_ID 4		/* Invalid destination end user */
+#define NSP_REASON_ER 5		/* End user lacks resources */
+#define NSP_REASON_OB 6		/* Object too busy */
+#define NSP_REASON_US 7		/* Unspecified error */
+#define NSP_REASON_TP 8		/* Third-Party abort */
+#define NSP_REASON_EA 9		/* End user has aborted the link */
+#define NSP_REASON_IF 10	/* Invalid node name format */
+#define NSP_REASON_LS 11	/* Local node shutdown */
+#define NSP_REASON_LL 32	/* Node lacks logical-link resources */
+#define NSP_REASON_LE 33	/* End user lacks logical-link resources */
+#define NSP_REASON_UR 34	/* Unacceptable RQSTRID or PASSWORD field */
+#define NSP_REASON_UA 36	/* Unacceptable ACCOUNT field */
+#define NSP_REASON_TM 38	/* End user timed out logical link */
+#define NSP_REASON_NU 39	/* Node unreachable */
+#define NSP_REASON_NL 41	/* No-link message */
+#define NSP_REASON_DC 42	/* Disconnect confirm */
+#define NSP_REASON_IO 43	/* Image data field overflow */
+
+#define NSP_DISCINIT 0x38
+#define NSP_DISCCONF 0x48
+
+/*------------------------- NSP - messages ------------------------------*/
+/* Data Messages */
+/*---------------*/
+
+/* Data Messages    (data segment/interrupt/link service)               */
+
+struct nsp_data_seg_msg
+{
+	unsigned char   msgflg          __attribute__((packed));
+	unsigned short  dstaddr         __attribute__((packed));
+	unsigned short  srcaddr         __attribute__((packed));
+};
+
+struct nsp_data_opt_msg
+{
+	unsigned short  acknum          __attribute__((packed));
+	unsigned short  segnum          __attribute__((packed));
+	unsigned short  lsflgs          __attribute__((packed));
+};
+
+struct nsp_data_opt_msg1
+{
+	unsigned short  acknum          __attribute__((packed));
+	unsigned short  segnum          __attribute__((packed));
+};
+
+
+/* Acknowledgment Message (data/other data)                             */
+struct nsp_data_ack_msg
+{
+	unsigned char   msgflg          __attribute__((packed));
+	unsigned short  dstaddr         __attribute__((packed));
+	unsigned short  srcaddr         __attribute__((packed));
+	unsigned short  acknum          __attribute__((packed));
+};
+
+/* Connect Acknowledgment Message */
+struct  nsp_conn_ack_msg
+{
+	unsigned char   msgflg          __attribute__((packed));
+	unsigned short  dstaddr         __attribute__((packed));
+};
+
+
+/* Connect Initiate/Retransmit Initiate/Connect Confirm */
+struct  nsp_conn_init_msg
+{
+	unsigned char   msgflg          __attribute__((packed));
+#define NSP_CI      0x18            /* Connect Initiate     */
+#define NSP_RCI     0x68            /* Retrans. Conn Init   */
+	unsigned short  dstaddr         __attribute__((packed));
+        unsigned short  srcaddr         __attribute__((packed));
+        unsigned char   services        __attribute__((packed));
+#define NSP_FC_NONE   0x00            /* Flow Control None    */
+#define NSP_FC_SRC    0x04            /* Seg Req. Count       */
+#define NSP_FC_SCMC   0x08            /* Sess. Control Mess   */
+#define NSP_FC_MASK   0x0c            /* FC type mask         */
+	unsigned char   info            __attribute__((packed));
+        unsigned short  segsize         __attribute__((packed));
+};
+
+/* Disconnect Initiate/Disconnect Confirm */
+struct  nsp_disconn_init_msg
+{
+	unsigned char   msgflg          __attribute__((packed));
+        unsigned short  dstaddr         __attribute__((packed));
+        unsigned short  srcaddr         __attribute__((packed));
+        unsigned short  reason          __attribute__((packed));
+};
+
+
+
+struct  srcobj_fmt
+{
+	char            format          __attribute__((packed));
+        unsigned char   task            __attribute__((packed));
+        unsigned short  grpcode         __attribute__((packed));
+        unsigned short  usrcode         __attribute__((packed));
+        char            dlen            __attribute__((packed));
+};
+
+/*
+ * A collection of functions for manipulating the sequence
+ * numbers used in NSP. Similar in operation to the functions
+ * of the same name in TCP.
+ */
+static __inline__ int dn_before(unsigned short seq1, unsigned short seq2)
+{
+        seq1 &= 0x0fff;
+        seq2 &= 0x0fff;
+
+        return (int)((seq1 - seq2) & 0x0fff) > 2048;
+}
+
+
+static __inline__ int dn_after(unsigned short seq1, unsigned short seq2)
+{
+        seq1 &= 0x0fff;
+        seq2 &= 0x0fff;
+
+        return (int)((seq2 - seq1) & 0x0fff) > 2048;
+}
+
+static __inline__ int dn_equal(unsigned short seq1, unsigned short seq2)
+{
+        return ((seq1 ^ seq2) & 0x0fff) == 0;
+}
+
+static __inline__ int dn_before_or_equal(unsigned short seq1, unsigned short seq2)
+{
+	return (dn_before(seq1, seq2) || dn_equal(seq1, seq2));
+}
+
+static __inline__ void seq_add(unsigned short *seq, unsigned short off)
+{
+        (*seq) += off;
+        (*seq) &= 0x0fff;
+}
+
+static __inline__ int seq_next(unsigned short seq1, unsigned short seq2)
+{
+	return dn_equal(seq1 + 1, seq2);
+}
+
+/*
+ * Can we delay the ack ?
+ */
+static __inline__ int sendack(unsigned short seq)
+{
+        return (int)((seq & 0x1000) ? 0 : 1);
+}
+
+/*
+ * Is socket congested ?
+ */
+static __inline__ int dn_congested(struct sock *sk)
+{
+        return atomic_read(&sk->sk_rmem_alloc) > (sk->sk_rcvbuf >> 1);
+}
+
+#define DN_MAX_NSP_DATA_HEADER (11)
+
+#endif /* _NET_DN_NSP_H */
diff --git a/include/net/dn_route.h b/include/net/dn_route.h
new file mode 100644
index 000000000000..d084721db198
--- /dev/null
+++ b/include/net/dn_route.h
@@ -0,0 +1,112 @@
+#ifndef _NET_DN_ROUTE_H
+#define _NET_DN_ROUTE_H
+
+/******************************************************************************
+    (c) 1995-1998 E.M. Serrat		emserrat@geocities.com
+    
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*******************************************************************************/
+
+extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, int pri);
+extern int dn_route_output_sock(struct dst_entry **pprt, struct flowi *, struct sock *sk, int flags);
+extern int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb);
+extern int dn_cache_getroute(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern void dn_rt_cache_flush(int delay);
+
+/* Masks for flags field */
+#define DN_RT_F_PID 0x07 /* Mask for packet type                      */
+#define DN_RT_F_PF  0x80 /* Padding Follows                           */
+#define DN_RT_F_VER 0x40 /* Version =0 discard packet if ==1          */
+#define DN_RT_F_IE  0x20 /* Intra Ethernet, Reserved in short pkt     */
+#define DN_RT_F_RTS 0x10 /* Packet is being returned to sender        */
+#define DN_RT_F_RQR 0x08 /* Return packet to sender upon non-delivery */
+
+/* Mask for types of routing packets */
+#define DN_RT_PKT_MSK   0x06
+/* Types of routing packets */
+#define DN_RT_PKT_SHORT 0x02 /* Short routing packet */
+#define DN_RT_PKT_LONG  0x06 /* Long routing packet  */
+
+/* Mask for control/routing selection */
+#define DN_RT_PKT_CNTL  0x01 /* Set to 1 if a control packet  */
+/* Types of control packets */
+#define DN_RT_CNTL_MSK  0x0f /* Mask for control packets      */
+#define DN_RT_PKT_INIT  0x01 /* Initialisation packet         */
+#define DN_RT_PKT_VERI  0x03 /* Verification Message          */
+#define DN_RT_PKT_HELO  0x05 /* Hello and Test Message        */
+#define DN_RT_PKT_L1RT  0x07 /* Level 1 Routing Message       */
+#define DN_RT_PKT_L2RT  0x09 /* Level 2 Routing Message       */
+#define DN_RT_PKT_ERTH  0x0b /* Ethernet Router Hello         */
+#define DN_RT_PKT_EEDH  0x0d /* Ethernet EndNode Hello        */
+
+/* Values for info field in hello message */
+#define DN_RT_INFO_TYPE 0x03 /* Type mask                     */
+#define DN_RT_INFO_L1RT 0x02 /* L1 Router                     */
+#define DN_RT_INFO_L2RT 0x01 /* L2 Router                     */
+#define DN_RT_INFO_ENDN 0x03 /* EndNode                       */
+#define DN_RT_INFO_VERI 0x04 /* Verification Reqd.            */
+#define DN_RT_INFO_RJCT 0x08 /* Reject Flag, Reserved         */
+#define DN_RT_INFO_VFLD 0x10 /* Verification Failed, Reserved */
+#define DN_RT_INFO_NOML 0x20 /* No Multicast traffic accepted */
+#define DN_RT_INFO_BLKR 0x40 /* Blocking Requested            */
+
+/*
+ * The fl structure is what we used to look up the route.
+ * The rt_saddr & rt_daddr entries are the same as key.saddr & key.daddr
+ * except for local input routes, where the rt_saddr = fl.fld_dst and
+ * rt_daddr = fl.fld_src to allow the route to be used for returning
+ * packets to the originating host.
+ */
+struct dn_route {
+	union {
+		struct dst_entry dst;
+		struct dn_route *rt_next;
+	} u;
+
+	__u16 rt_saddr;
+	__u16 rt_daddr;
+	__u16 rt_gateway;
+	__u16 rt_local_src;	/* Source used for forwarding packets */
+	__u16 rt_src_map;
+	__u16 rt_dst_map;
+
+	unsigned rt_flags;
+	unsigned rt_type;
+
+	struct flowi fl;
+};
+
+extern void dn_route_init(void);
+extern void dn_route_cleanup(void);
+
+#include <net/sock.h>
+#include <linux/if_arp.h>
+
+static inline void dn_rt_send(struct sk_buff *skb)
+{
+	dev_queue_xmit(skb);
+}
+
+static inline void dn_rt_finish_output(struct sk_buff *skb, char *dst, char *src)
+{
+	struct net_device *dev = skb->dev;
+
+	if ((dev->type != ARPHRD_ETHER) && (dev->type != ARPHRD_LOOPBACK))
+		dst = NULL;
+
+	if (!dev->hard_header || (dev->hard_header(skb, dev, ETH_P_DNA_RT,
+			dst, src, skb->len) >= 0))
+		dn_rt_send(skb);
+	else
+		kfree_skb(skb);
+}
+
+#endif /* _NET_DN_ROUTE_H */
diff --git a/include/net/dsfield.h b/include/net/dsfield.h
new file mode 100644
index 000000000000..a79c9e075f7f
--- /dev/null
+++ b/include/net/dsfield.h
@@ -0,0 +1,54 @@
+/* include/net/dsfield.h - Manipulation of the Differentiated Services field */
+
+/* Written 1998-2000 by Werner Almesberger, EPFL ICA */
+
+
+#ifndef __NET_DSFIELD_H
+#define __NET_DSFIELD_H
+
+#include <linux/types.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <asm/byteorder.h>
+
+
+static inline __u8 ipv4_get_dsfield(struct iphdr *iph)
+{
+	return iph->tos;
+}
+
+
+static inline __u8 ipv6_get_dsfield(struct ipv6hdr *ipv6h)
+{
+	return ntohs(*(__u16 *) ipv6h) >> 4;
+}
+
+
+static inline void ipv4_change_dsfield(struct iphdr *iph,__u8 mask,
+    __u8 value)
+{
+        __u32 check = ntohs(iph->check);
+	__u8 dsfield;
+
+	dsfield = (iph->tos & mask) | value;
+	check += iph->tos;
+	if ((check+1) >> 16) check = (check+1) & 0xffff;
+	check -= dsfield;
+	check += check >> 16; /* adjust carry */
+	iph->check = htons(check);
+	iph->tos = dsfield;
+}
+
+
+static inline void ipv6_change_dsfield(struct ipv6hdr *ipv6h,__u8 mask,
+    __u8 value)
+{
+        __u16 tmp;
+
+	tmp = ntohs(*(__u16 *) ipv6h);
+	tmp = (tmp & ((mask << 4) | 0xf00f)) | (value << 4);
+	*(__u16 *) ipv6h = htons(tmp);
+}
+
+
+#endif
diff --git a/include/net/dst.h b/include/net/dst.h
new file mode 100644
index 000000000000..50adc9136530
--- /dev/null
+++ b/include/net/dst.h
@@ -0,0 +1,279 @@
+/*
+ * net/dst.h	Protocol independent destination cache definitions.
+ *
+ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
+ *
+ */
+
+#ifndef _NET_DST_H
+#define _NET_DST_H
+
+#include <linux/config.h>
+#include <linux/rtnetlink.h>
+#include <linux/rcupdate.h>
+#include <linux/jiffies.h>
+#include <net/neighbour.h>
+#include <asm/processor.h>
+
+/*
+ * 0 - no debugging messages
+ * 1 - rare events and bugs (default)
+ * 2 - trace mode.
+ */
+#define RT_CACHE_DEBUG		0
+
+#define DST_GC_MIN	(HZ/10)
+#define DST_GC_INC	(HZ/2)
+#define DST_GC_MAX	(120*HZ)
+
+/* Each dst_entry has reference count and sits in some parent list(s).
+ * When it is removed from parent list, it is "freed" (dst_free).
+ * After this it enters dead state (dst->obsolete > 0) and if its refcnt
+ * is zero, it can be destroyed immediately, otherwise it is added
+ * to gc list and garbage collector periodically checks the refcnt.
+ */
+
+struct sk_buff;
+
+struct dst_entry
+{
+	struct dst_entry        *next;
+	atomic_t		__refcnt;	/* client references	*/
+	int			__use;
+	struct dst_entry	*child;
+	struct net_device       *dev;
+	int			obsolete;
+	int			flags;
+#define DST_HOST		1
+#define DST_NOXFRM		2
+#define DST_NOPOLICY		4
+#define DST_NOHASH		8
+#define DST_BALANCED            0x10
+	unsigned long		lastuse;
+	unsigned long		expires;
+
+	unsigned short		header_len;	/* more space at head required */
+	unsigned short		trailer_len;	/* space to reserve at tail */
+
+	u32			metrics[RTAX_MAX];
+	struct dst_entry	*path;
+
+	unsigned long		rate_last;	/* rate limiting for ICMP */
+	unsigned long		rate_tokens;
+
+	int			error;
+
+	struct neighbour	*neighbour;
+	struct hh_cache		*hh;
+	struct xfrm_state	*xfrm;
+
+	int			(*input)(struct sk_buff*);
+	int			(*output)(struct sk_buff*);
+
+#ifdef CONFIG_NET_CLS_ROUTE
+	__u32			tclassid;
+#endif
+
+	struct  dst_ops	        *ops;
+	struct rcu_head		rcu_head;
+		
+	char			info[0];
+};
+
+
+struct dst_ops
+{
+	unsigned short		family;
+	unsigned short		protocol;
+	unsigned		gc_thresh;
+
+	int			(*gc)(void);
+	struct dst_entry *	(*check)(struct dst_entry *, __u32 cookie);
+	void			(*destroy)(struct dst_entry *);
+	void			(*ifdown)(struct dst_entry *,
+					  struct net_device *dev, int how);
+	struct dst_entry *	(*negative_advice)(struct dst_entry *);
+	void			(*link_failure)(struct sk_buff *);
+	void			(*update_pmtu)(struct dst_entry *dst, u32 mtu);
+	int			(*get_mss)(struct dst_entry *dst, u32 mtu);
+	int			entry_size;
+
+	atomic_t		entries;
+	kmem_cache_t 		*kmem_cachep;
+};
+
+#ifdef __KERNEL__
+
+static inline u32
+dst_metric(const struct dst_entry *dst, int metric)
+{
+	return dst->metrics[metric-1];
+}
+
+static inline u32 dst_mtu(const struct dst_entry *dst)
+{
+	u32 mtu = dst_metric(dst, RTAX_MTU);
+	/*
+	 * Alexey put it here, so ask him about it :)
+	 */
+	barrier();
+	return mtu;
+}
+
+static inline u32
+dst_allfrag(const struct dst_entry *dst)
+{
+	int ret = dst_metric(dst, RTAX_FEATURES) & RTAX_FEATURE_ALLFRAG;
+	/* Yes, _exactly_. This is paranoia. */
+	barrier();
+	return ret;
+}
+
+static inline int
+dst_metric_locked(struct dst_entry *dst, int metric)
+{
+	return dst_metric(dst, RTAX_LOCK) & (1<<metric);
+}
+
+static inline void dst_hold(struct dst_entry * dst)
+{
+	atomic_inc(&dst->__refcnt);
+}
+
+static inline
+struct dst_entry * dst_clone(struct dst_entry * dst)
+{
+	if (dst)
+		atomic_inc(&dst->__refcnt);
+	return dst;
+}
+
+static inline
+void dst_release(struct dst_entry * dst)
+{
+	if (dst) {
+		WARN_ON(atomic_read(&dst->__refcnt) < 1);
+		smp_mb__before_atomic_dec();
+		atomic_dec(&dst->__refcnt);
+	}
+}
+
+/* Children define the path of the packet through the
+ * Linux networking.  Thus, destinations are stackable.
+ */
+
+static inline struct dst_entry *dst_pop(struct dst_entry *dst)
+{
+	struct dst_entry *child = dst_clone(dst->child);
+
+	dst_release(dst);
+	return child;
+}
+
+extern void * dst_alloc(struct dst_ops * ops);
+extern void __dst_free(struct dst_entry * dst);
+extern struct dst_entry *dst_destroy(struct dst_entry * dst);
+
+static inline void dst_free(struct dst_entry * dst)
+{
+	if (dst->obsolete > 1)
+		return;
+	if (!atomic_read(&dst->__refcnt)) {
+		dst = dst_destroy(dst);
+		if (!dst)
+			return;
+	}
+	__dst_free(dst);
+}
+
+static inline void dst_rcu_free(struct rcu_head *head)
+{
+	struct dst_entry *dst = container_of(head, struct dst_entry, rcu_head);
+	dst_free(dst);
+}
+
+static inline void dst_confirm(struct dst_entry *dst)
+{
+	if (dst)
+		neigh_confirm(dst->neighbour);
+}
+
+static inline void dst_negative_advice(struct dst_entry **dst_p)
+{
+	struct dst_entry * dst = *dst_p;
+	if (dst && dst->ops->negative_advice)
+		*dst_p = dst->ops->negative_advice(dst);
+}
+
+static inline void dst_link_failure(struct sk_buff *skb)
+{
+	struct dst_entry * dst = skb->dst;
+	if (dst && dst->ops && dst->ops->link_failure)
+		dst->ops->link_failure(skb);
+}
+
+static inline void dst_set_expires(struct dst_entry *dst, int timeout)
+{
+	unsigned long expires = jiffies + timeout;
+
+	if (expires == 0)
+		expires = 1;
+
+	if (dst->expires == 0 || time_before(expires, dst->expires))
+		dst->expires = expires;
+}
+
+/* Output packet to network from transport.  */
+static inline int dst_output(struct sk_buff *skb)
+{
+	int err;
+
+	for (;;) {
+		err = skb->dst->output(skb);
+
+		if (likely(err == 0))
+			return err;
+		if (unlikely(err != NET_XMIT_BYPASS))
+			return err;
+	}
+}
+
+/* Input packet from network to transport.  */
+static inline int dst_input(struct sk_buff *skb)
+{
+	int err;
+
+	for (;;) {
+		err = skb->dst->input(skb);
+
+		if (likely(err == 0))
+			return err;
+		/* Oh, Jamal... Seems, I will not forgive you this mess. :-) */
+		if (unlikely(err != NET_XMIT_BYPASS))
+			return err;
+	}
+}
+
+static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
+{
+	if (dst->obsolete)
+		dst = dst->ops->check(dst, cookie);
+	return dst;
+}
+
+extern void		dst_init(void);
+
+struct flowi;
+#ifndef CONFIG_XFRM
+static inline int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl,
+		       struct sock *sk, int flags)
+{
+	return 0;
+} 
+#else
+extern int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl,
+		       struct sock *sk, int flags);
+#endif
+#endif
+
+#endif /* _NET_DST_H */
diff --git a/include/net/esp.h b/include/net/esp.h
new file mode 100644
index 000000000000..90cd94fad7d9
--- /dev/null
+++ b/include/net/esp.h
@@ -0,0 +1,59 @@
+#ifndef _NET_ESP_H
+#define _NET_ESP_H
+
+#include <net/xfrm.h>
+#include <asm/scatterlist.h>
+
+#define ESP_NUM_FAST_SG		4
+
+struct esp_data
+{
+	struct scatterlist		sgbuf[ESP_NUM_FAST_SG];
+
+	/* Confidentiality */
+	struct {
+		u8			*key;		/* Key */
+		int			key_len;	/* Key length */
+		u8			*ivec;		/* ivec buffer */
+		/* ivlen is offset from enc_data, where encrypted data start.
+		 * It is logically different of crypto_tfm_alg_ivsize(tfm).
+		 * We assume that it is either zero (no ivec), or
+		 * >= crypto_tfm_alg_ivsize(tfm). */
+		int			ivlen;
+		int			padlen;		/* 0..255 */
+		struct crypto_tfm	*tfm;		/* crypto handle */
+	} conf;
+
+	/* Integrity. It is active when icv_full_len != 0 */
+	struct {
+		u8			*key;		/* Key */
+		int			key_len;	/* Length of the key */
+		u8			*work_icv;
+		int			icv_full_len;
+		int			icv_trunc_len;
+		void			(*icv)(struct esp_data*,
+		                               struct sk_buff *skb,
+		                               int offset, int len, u8 *icv);
+		struct crypto_tfm	*tfm;
+	} auth;
+};
+
+extern int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len);
+extern int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer);
+extern void *pskb_put(struct sk_buff *skb, struct sk_buff *tail, int len);
+
+static inline void
+esp_hmac_digest(struct esp_data *esp, struct sk_buff *skb, int offset,
+                int len, u8 *auth_data)
+{
+	struct crypto_tfm *tfm = esp->auth.tfm;
+	char *icv = esp->auth.work_icv;
+
+	memset(auth_data, 0, esp->auth.icv_trunc_len);
+	crypto_hmac_init(tfm, esp->auth.key, &esp->auth.key_len);
+	skb_icv_walk(skb, tfm, offset, len, crypto_hmac_update);
+	crypto_hmac_final(tfm, esp->auth.key, &esp->auth.key_len, icv);
+	memcpy(auth_data, icv, esp->auth.icv_trunc_len);
+}
+
+#endif
diff --git a/include/net/flow.h b/include/net/flow.h
new file mode 100644
index 000000000000..9a5c94b1a0ec
--- /dev/null
+++ b/include/net/flow.h
@@ -0,0 +1,95 @@
+/*
+ *
+ *	Generic internet FLOW.
+ *
+ */
+
+#ifndef _NET_FLOW_H
+#define _NET_FLOW_H
+
+#include <linux/in6.h>
+#include <asm/atomic.h>
+
+struct flowi {
+	int	oif;
+	int	iif;
+
+	union {
+		struct {
+			__u32			daddr;
+			__u32			saddr;
+			__u32			fwmark;
+			__u8			tos;
+			__u8			scope;
+		} ip4_u;
+		
+		struct {
+			struct in6_addr		daddr;
+			struct in6_addr		saddr;
+			__u32			flowlabel;
+		} ip6_u;
+
+		struct {
+			__u16			daddr;
+			__u16			saddr;
+			__u32			fwmark;
+			__u8			scope;
+		} dn_u;
+	} nl_u;
+#define fld_dst		nl_u.dn_u.daddr
+#define fld_src		nl_u.dn_u.saddr
+#define fld_fwmark	nl_u.dn_u.fwmark
+#define fld_scope	nl_u.dn_u.scope
+#define fl6_dst		nl_u.ip6_u.daddr
+#define fl6_src		nl_u.ip6_u.saddr
+#define fl6_flowlabel	nl_u.ip6_u.flowlabel
+#define fl4_dst		nl_u.ip4_u.daddr
+#define fl4_src		nl_u.ip4_u.saddr
+#define fl4_fwmark	nl_u.ip4_u.fwmark
+#define fl4_tos		nl_u.ip4_u.tos
+#define fl4_scope	nl_u.ip4_u.scope
+
+	__u8	proto;
+	__u8	flags;
+#define FLOWI_FLAG_MULTIPATHOLDROUTE 0x01
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+		} icmpt;
+
+		struct {
+			__u16	sport;
+			__u16	dport;
+			__u8	objnum;
+			__u8	objnamel; /* Not 16 bits since max val is 16 */
+			__u8	objname[16]; /* Not zero terminated */
+		} dnports;
+
+		__u32		spi;
+	} uli_u;
+#define fl_ip_sport	uli_u.ports.sport
+#define fl_ip_dport	uli_u.ports.dport
+#define fl_icmp_type	uli_u.icmpt.type
+#define fl_icmp_code	uli_u.icmpt.code
+#define fl_ipsec_spi	uli_u.spi
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
+
+#define FLOW_DIR_IN	0
+#define FLOW_DIR_OUT	1
+#define FLOW_DIR_FWD	2
+
+typedef void (*flow_resolve_t)(struct flowi *key, u16 family, u8 dir,
+			       void **objp, atomic_t **obj_refp);
+
+extern void *flow_cache_lookup(struct flowi *key, u16 family, u8 dir,
+			       flow_resolve_t resolver);
+extern void flow_cache_flush(void);
+extern atomic_t flow_cache_genid;
+
+#endif
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
new file mode 100644
index 000000000000..0b95cf031d6e
--- /dev/null
+++ b/include/net/gen_stats.h
@@ -0,0 +1,49 @@
+#ifndef __NET_GEN_STATS_H
+#define __NET_GEN_STATS_H
+
+#include <linux/gen_stats.h>
+#include <linux/socket.h>
+#include <linux/rtnetlink.h>
+#include <linux/pkt_sched.h>
+
+struct gnet_dump
+{
+	spinlock_t *      lock;
+	struct sk_buff *  skb;
+	struct rtattr *   tail;
+
+	/* Backward compatability */
+	int               compat_tc_stats;
+	int               compat_xstats;
+	void *            xstats;
+	int               xstats_len;
+	struct tc_stats   tc_stats;
+};
+
+extern int gnet_stats_start_copy(struct sk_buff *skb, int type,
+				 spinlock_t *lock, struct gnet_dump *d);
+
+extern int gnet_stats_start_copy_compat(struct sk_buff *skb, int type,
+					int tc_stats_type,int xstats_type,
+					spinlock_t *lock, struct gnet_dump *d);
+
+extern int gnet_stats_copy_basic(struct gnet_dump *d,
+				 struct gnet_stats_basic *b);
+extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
+				    struct gnet_stats_rate_est *r);
+extern int gnet_stats_copy_queue(struct gnet_dump *d,
+				 struct gnet_stats_queue *q);
+extern int gnet_stats_copy_app(struct gnet_dump *d, void *st, int len);
+
+extern int gnet_stats_finish_copy(struct gnet_dump *d);
+
+extern int gen_new_estimator(struct gnet_stats_basic *bstats,
+			     struct gnet_stats_rate_est *rate_est,
+			     spinlock_t *stats_lock, struct rtattr *opt);
+extern void gen_kill_estimator(struct gnet_stats_basic *bstats,
+			       struct gnet_stats_rate_est *rate_est);
+extern int gen_replace_estimator(struct gnet_stats_basic *bstats,
+				 struct gnet_stats_rate_est *rate_est,
+				 spinlock_t *stats_lock, struct rtattr *opt);
+
+#endif
diff --git a/include/net/icmp.h b/include/net/icmp.h
new file mode 100644
index 000000000000..3fc192478aa2
--- /dev/null
+++ b/include/net/icmp.h
@@ -0,0 +1,60 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP module.
+ *
+ * Version:	@(#)icmp.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _ICMP_H
+#define	_ICMP_H
+
+#include <linux/config.h>
+#include <linux/icmp.h>
+#include <linux/skbuff.h>
+
+#include <net/sock.h>
+#include <net/protocol.h>
+#include <net/snmp.h>
+#include <linux/ip.h>
+
+struct icmp_err {
+  int		errno;
+  unsigned	fatal:1;
+};
+
+extern struct icmp_err icmp_err_convert[];
+DECLARE_SNMP_STAT(struct icmp_mib, icmp_statistics);
+#define ICMP_INC_STATS(field)		SNMP_INC_STATS(icmp_statistics, field)
+#define ICMP_INC_STATS_BH(field)	SNMP_INC_STATS_BH(icmp_statistics, field)
+#define ICMP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(icmp_statistics, field)
+
+extern void	icmp_send(struct sk_buff *skb_in,  int type, int code, u32 info);
+extern int	icmp_rcv(struct sk_buff *skb);
+extern int	icmp_ioctl(struct sock *sk, int cmd, unsigned long arg);
+extern void	icmp_init(struct net_proto_family *ops);
+
+/* Move into dst.h ? */
+extern int 	xrlim_allow(struct dst_entry *dst, int timeout);
+
+struct raw_sock {
+	/* inet_sock has to be the first member */
+	struct inet_sock   inet;
+	struct icmp_filter filter;
+};
+
+static inline struct raw_sock *raw_sk(const struct sock *sk)
+{
+	return (struct raw_sock *)sk;
+}
+
+#endif	/* _ICMP_H */
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
new file mode 100644
index 000000000000..e97a9accb71d
--- /dev/null
+++ b/include/net/if_inet6.h
@@ -0,0 +1,285 @@
+/*
+ *	inet6 interface/address list definitions
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IF_INET6_H
+#define _NET_IF_INET6_H
+
+#include <net/snmp.h>
+#include <linux/ipv6.h>
+
+/* inet6_dev.if_flags */
+
+#define IF_RA_OTHERCONF	0x80
+#define IF_RA_MANAGED	0x40
+#define IF_RA_RCVD	0x20
+#define IF_RS_SENT	0x10
+
+/* prefix flags */
+#define IF_PREFIX_ONLINK	0x01
+#define IF_PREFIX_AUTOCONF	0x02
+
+#ifdef __KERNEL__
+
+struct inet6_ifaddr 
+{
+	struct in6_addr		addr;
+	__u32			prefix_len;
+	
+	__u32			valid_lft;
+	__u32			prefered_lft;
+	unsigned long		cstamp;	/* created timestamp */
+	unsigned long		tstamp; /* updated timestamp */
+	atomic_t		refcnt;
+	spinlock_t		lock;
+
+	__u8			probes;
+	__u8			flags;
+
+	__u16			scope;
+
+	struct timer_list	timer;
+
+	struct inet6_dev	*idev;
+	struct rt6_info		*rt;
+
+	struct inet6_ifaddr	*lst_next;      /* next addr in addr_lst */
+	struct inet6_ifaddr	*if_next;       /* next addr in inet6_dev */
+
+#ifdef CONFIG_IPV6_PRIVACY
+	struct inet6_ifaddr	*tmp_next;	/* next addr in tempaddr_lst */
+	struct inet6_ifaddr	*ifpub;
+	int			regen_count;
+#endif
+
+	int			dead;
+};
+
+struct ip6_sf_socklist
+{
+	unsigned int		sl_max;
+	unsigned int		sl_count;
+	struct in6_addr		sl_addr[0];
+};
+
+#define IP6_SFLSIZE(count)	(sizeof(struct ip6_sf_socklist) + \
+	(count) * sizeof(struct in6_addr))
+
+#define IP6_SFBLOCK	10	/* allocate this many at once */
+
+struct ipv6_mc_socklist
+{
+	struct in6_addr		addr;
+	int			ifindex;
+	struct ipv6_mc_socklist *next;
+	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
+	struct ip6_sf_socklist	*sflist;
+};
+
+struct ip6_sf_list
+{
+	struct ip6_sf_list	*sf_next;
+	struct in6_addr		sf_addr;
+	unsigned long		sf_count[2];	/* include/exclude counts */
+	unsigned char		sf_gsresp;	/* include in g & s response? */
+	unsigned char		sf_oldin;	/* change state */
+	unsigned char		sf_crcount;	/* retrans. left to send */
+};
+
+#define MAF_TIMER_RUNNING	0x01
+#define MAF_LAST_REPORTER	0x02
+#define MAF_LOADED		0x04
+#define MAF_NOREPORT		0x08
+#define MAF_GSQUERY		0x10
+
+struct ifmcaddr6
+{
+	struct in6_addr		mca_addr;
+	struct inet6_dev	*idev;
+	struct ifmcaddr6	*next;
+	struct ip6_sf_list	*mca_sources;
+	struct ip6_sf_list	*mca_tomb;
+	unsigned int		mca_sfmode;
+	unsigned long		mca_sfcount[2];
+	struct timer_list	mca_timer;
+	unsigned		mca_flags;
+	int			mca_users;
+	atomic_t		mca_refcnt;
+	spinlock_t		mca_lock;
+	unsigned char		mca_crcount;
+	unsigned long		mca_cstamp;
+	unsigned long		mca_tstamp;
+};
+
+/* Anycast stuff */
+
+struct ipv6_ac_socklist
+{
+	struct in6_addr		acl_addr;
+	int			acl_ifindex;
+	struct ipv6_ac_socklist *acl_next;
+};
+
+struct ifacaddr6
+{
+	struct in6_addr		aca_addr;
+	struct inet6_dev	*aca_idev;
+	struct rt6_info		*aca_rt;
+	struct ifacaddr6	*aca_next;
+	int			aca_users;
+	atomic_t		aca_refcnt;
+	spinlock_t		aca_lock;
+	unsigned long		aca_cstamp;
+	unsigned long		aca_tstamp;
+};
+
+#define	IFA_HOST	IPV6_ADDR_LOOPBACK
+#define	IFA_LINK	IPV6_ADDR_LINKLOCAL
+#define	IFA_SITE	IPV6_ADDR_SITELOCAL
+#define	IFA_GLOBAL	0x0000U
+
+struct ipv6_devstat {
+	struct proc_dir_entry	*proc_dir_entry;
+	DEFINE_SNMP_STAT(struct icmpv6_mib, icmpv6);
+};
+
+struct inet6_dev 
+{
+	struct net_device		*dev;
+
+	struct inet6_ifaddr	*addr_list;
+
+	struct ifmcaddr6	*mc_list;
+	struct ifmcaddr6	*mc_tomb;
+	rwlock_t		mc_lock;
+	unsigned long		mc_v1_seen;
+	unsigned long		mc_maxdelay;
+	unsigned char		mc_qrv;
+	unsigned char		mc_gq_running;
+	unsigned char		mc_ifc_count;
+	struct timer_list	mc_gq_timer;	/* general query timer */
+	struct timer_list	mc_ifc_timer;	/* interface change timer */
+
+	struct ifacaddr6	*ac_list;
+	rwlock_t		lock;
+	atomic_t		refcnt;
+	__u32			if_flags;
+	int			dead;
+
+#ifdef CONFIG_IPV6_PRIVACY
+	u8			rndid[8];
+	u8			entropy[8];
+	struct timer_list	regen_timer;
+	struct inet6_ifaddr	*tempaddr_list;
+	__u8			work_eui64[8];
+	__u8			work_digest[16];
+#endif
+
+	struct neigh_parms	*nd_parms;
+	struct inet6_dev	*next;
+	struct ipv6_devconf	cnf;
+	struct ipv6_devstat	stats;
+	unsigned long		tstamp; /* ipv6InterfaceTable update timestamp */
+};
+
+extern struct ipv6_devconf ipv6_devconf;
+
+static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
+{
+	/*
+	 *	+-------+-------+-------+-------+-------+-------+
+	 *      |   33  |   33  | DST13 | DST14 | DST15 | DST16 |
+	 *      +-------+-------+-------+-------+-------+-------+
+	 */
+
+	buf[0]= 0x33;
+	buf[1]= 0x33;
+
+	memcpy(buf + 2, &addr->s6_addr32[3], sizeof(__u32));
+}
+
+static inline void ipv6_tr_mc_map(struct in6_addr *addr, char *buf)
+{
+	/* All nodes FF01::1, FF02::1, FF02::1:FFxx:xxxx */
+
+	if (((addr->s6_addr[0] == 0xFF) &&
+	    ((addr->s6_addr[1] == 0x01) || (addr->s6_addr[1] == 0x02)) &&
+	     (addr->s6_addr16[1] == 0) &&
+	     (addr->s6_addr32[1] == 0) &&
+	     (addr->s6_addr32[2] == 0) &&
+	     (addr->s6_addr16[6] == 0) &&
+	     (addr->s6_addr[15] == 1)) ||
+	    ((addr->s6_addr[0] == 0xFF) &&
+	     (addr->s6_addr[1] == 0x02) &&
+	     (addr->s6_addr16[1] == 0) &&
+	     (addr->s6_addr32[1] == 0) &&
+	     (addr->s6_addr16[4] == 0) &&
+	     (addr->s6_addr[10] == 0) &&
+	     (addr->s6_addr[11] == 1) &&
+	     (addr->s6_addr[12] == 0xff)))
+	{
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x01;
+		buf[3]=0x00;
+		buf[4]=0x00;
+		buf[5]=0x00;
+	/* All routers FF0x::2 */
+	} else if ((addr->s6_addr[0] ==0xff) &&
+		((addr->s6_addr[1] & 0xF0) == 0) &&
+		(addr->s6_addr16[1] == 0) &&
+		(addr->s6_addr32[1] == 0) &&
+		(addr->s6_addr32[2] == 0) &&
+		(addr->s6_addr16[6] == 0) &&
+		(addr->s6_addr[15] == 2))
+	{
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x02;
+		buf[3]=0x00;
+		buf[4]=0x00;
+		buf[5]=0x00;
+	} else {
+		unsigned char i ; 
+		
+		i = addr->s6_addr[15] & 7 ; 
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x00;
+		buf[3]=0x01 << i ; 
+		buf[4]=0x00;
+		buf[5]=0x00;
+	}
+}
+
+static inline void ipv6_arcnet_mc_map(const struct in6_addr *addr, char *buf)
+{
+	buf[0] = 0x00;
+}
+
+static inline void ipv6_ib_mc_map(struct in6_addr *addr, char *buf)
+{
+	buf[0]  = 0;		/* Reserved */
+	buf[1]  = 0xff;		/* Multicast QPN */
+	buf[2]  = 0xff;
+	buf[3]  = 0xff;
+	buf[4]  = 0xff;
+	buf[5]  = 0x12;		/* link local scope */
+	buf[6]  = 0x60;		/* IPv6 signature */
+	buf[7]  = 0x1b;
+	buf[8]  = 0;		/* P_Key */
+	buf[9]  = 0;
+	memcpy(buf + 10, addr->s6_addr + 6, 10);
+}
+#endif
+#endif
diff --git a/include/net/inet_common.h b/include/net/inet_common.h
new file mode 100644
index 000000000000..fbc1f4d140d8
--- /dev/null
+++ b/include/net/inet_common.h
@@ -0,0 +1,44 @@
+#ifndef _INET_COMMON_H
+#define _INET_COMMON_H
+
+extern struct proto_ops		inet_stream_ops;
+extern struct proto_ops		inet_dgram_ops;
+
+/*
+ *	INET4 prototypes used by INET6
+ */
+
+extern void			inet_remove_sock(struct sock *sk1);
+extern void			inet_put_sock(unsigned short num, 
+					      struct sock *sk);
+extern int			inet_release(struct socket *sock);
+extern int			inet_stream_connect(struct socket *sock,
+						    struct sockaddr * uaddr,
+						    int addr_len, int flags);
+extern int			inet_dgram_connect(struct socket *sock, 
+						   struct sockaddr * uaddr,
+						   int addr_len, int flags);
+extern int			inet_accept(struct socket *sock, 
+					    struct socket *newsock, int flags);
+extern int			inet_sendmsg(struct kiocb *iocb,
+					     struct socket *sock, 
+					     struct msghdr *msg, 
+					     size_t size);
+extern int			inet_shutdown(struct socket *sock, int how);
+extern unsigned int		inet_poll(struct file * file, struct socket *sock, struct poll_table_struct *wait);
+extern int			inet_listen(struct socket *sock, int backlog);
+
+extern void			inet_sock_destruct(struct sock *sk);
+extern atomic_t			inet_sock_nr;
+
+extern int			inet_bind(struct socket *sock, 
+					  struct sockaddr *uaddr, int addr_len);
+extern int			inet_getname(struct socket *sock, 
+					     struct sockaddr *uaddr, 
+					     int *uaddr_len, int peer);
+extern int			inet_ioctl(struct socket *sock, 
+					   unsigned int cmd, unsigned long arg);
+
+#endif
+
+
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
new file mode 100644
index 000000000000..f87845e2e965
--- /dev/null
+++ b/include/net/inet_ecn.h
@@ -0,0 +1,108 @@
+#ifndef _INET_ECN_H_
+#define _INET_ECN_H_
+
+#include <linux/ip.h>
+#include <net/dsfield.h>
+
+enum {
+	INET_ECN_NOT_ECT = 0,
+	INET_ECN_ECT_1 = 1,
+	INET_ECN_ECT_0 = 2,
+	INET_ECN_CE = 3,
+	INET_ECN_MASK = 3,
+};
+
+static inline int INET_ECN_is_ce(__u8 dsfield)
+{
+	return (dsfield & INET_ECN_MASK) == INET_ECN_CE;
+}
+
+static inline int INET_ECN_is_not_ect(__u8 dsfield)
+{
+	return (dsfield & INET_ECN_MASK) == INET_ECN_NOT_ECT;
+}
+
+static inline int INET_ECN_is_capable(__u8 dsfield)
+{
+	return (dsfield & INET_ECN_ECT_0);
+}
+
+static inline __u8 INET_ECN_encapsulate(__u8 outer, __u8 inner)
+{
+	outer &= ~INET_ECN_MASK;
+	outer |= !INET_ECN_is_ce(inner) ? (inner & INET_ECN_MASK) :
+					  INET_ECN_ECT_0;
+	return outer;
+}
+
+#define	INET_ECN_xmit(sk) do { inet_sk(sk)->tos |= INET_ECN_ECT_0; } while (0)
+#define	INET_ECN_dontxmit(sk) \
+	do { inet_sk(sk)->tos &= ~INET_ECN_MASK; } while (0)
+
+#define IP6_ECN_flow_init(label) do {		\
+      (label) &= ~htonl(INET_ECN_MASK << 20);	\
+    } while (0)
+
+#define	IP6_ECN_flow_xmit(sk, label) do {				\
+	if (INET_ECN_is_capable(inet_sk(sk)->tos))			\
+		(label) |= __constant_htons(INET_ECN_ECT_0 << 4);	\
+    } while (0)
+
+static inline void IP_ECN_set_ce(struct iphdr *iph)
+{
+	u32 check = iph->check;
+	u32 ecn = (iph->tos + 1) & INET_ECN_MASK;
+
+	/*
+	 * After the last operation we have (in binary):
+	 * INET_ECN_NOT_ECT => 01
+	 * INET_ECN_ECT_1   => 10
+	 * INET_ECN_ECT_0   => 11
+	 * INET_ECN_CE      => 00
+	 */
+	if (!(ecn & 2))
+		return;
+
+	/*
+	 * The following gives us:
+	 * INET_ECN_ECT_1 => check += htons(0xFFFD)
+	 * INET_ECN_ECT_0 => check += htons(0xFFFE)
+	 */
+	check += htons(0xFFFB) + htons(ecn);
+
+	iph->check = check + (check>=0xFFFF);
+	iph->tos |= INET_ECN_CE;
+}
+
+static inline void IP_ECN_clear(struct iphdr *iph)
+{
+	iph->tos &= ~INET_ECN_MASK;
+}
+
+static inline void ipv4_copy_dscp(struct iphdr *outer, struct iphdr *inner)
+{
+	u32 dscp = ipv4_get_dsfield(outer) & ~INET_ECN_MASK;
+	ipv4_change_dsfield(inner, INET_ECN_MASK, dscp);
+}
+
+struct ipv6hdr;
+
+static inline void IP6_ECN_set_ce(struct ipv6hdr *iph)
+{
+	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+		return;
+	*(u32*)iph |= htonl(INET_ECN_CE << 20);
+}
+
+static inline void IP6_ECN_clear(struct ipv6hdr *iph)
+{
+	*(u32*)iph &= ~htonl(INET_ECN_MASK << 20);
+}
+
+static inline void ipv6_copy_dscp(struct ipv6hdr *outer, struct ipv6hdr *inner)
+{
+	u32 dscp = ipv6_get_dsfield(outer) & ~INET_ECN_MASK;
+	ipv6_change_dsfield(inner, INET_ECN_MASK, dscp);
+}
+
+#endif
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
new file mode 100644
index 000000000000..7fda471002b6
--- /dev/null
+++ b/include/net/inetpeer.h
@@ -0,0 +1,66 @@
+/*
+ *		INETPEER - A storage for permanent information about peers
+ *
+ *  Version:	$Id: inetpeer.h,v 1.2 2002/01/12 07:54:56 davem Exp $
+ *
+ *  Authors:	Andrey V. Savochkin <saw@msu.ru>
+ */
+
+#ifndef _NET_INETPEER_H
+#define _NET_INETPEER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+struct inet_peer
+{
+	struct inet_peer	*avl_left, *avl_right;
+	struct inet_peer	*unused_next, **unused_prevp;
+	unsigned long		dtime;		/* the time of last use of not
+						 * referenced entries */
+	atomic_t		refcnt;
+	__u32			v4daddr;	/* peer's address */
+	__u16			avl_height;
+	__u16			ip_id_count;	/* IP ID for the next packet */
+	__u32			tcp_ts;
+	unsigned long		tcp_ts_stamp;
+};
+
+void			inet_initpeers(void) __init;
+
+/* can be called with or without local BH being disabled */
+struct inet_peer	*inet_getpeer(__u32 daddr, int create);
+
+extern spinlock_t inet_peer_unused_lock;
+extern struct inet_peer **inet_peer_unused_tailp;
+/* can be called from BH context or outside */
+static inline void	inet_putpeer(struct inet_peer *p)
+{
+	spin_lock_bh(&inet_peer_unused_lock);
+	if (atomic_dec_and_test(&p->refcnt)) {
+		p->unused_prevp = inet_peer_unused_tailp;
+		p->unused_next = NULL;
+		*inet_peer_unused_tailp = p;
+		inet_peer_unused_tailp = &p->unused_next;
+		p->dtime = jiffies;
+	}
+	spin_unlock_bh(&inet_peer_unused_lock);
+}
+
+extern spinlock_t inet_peer_idlock;
+/* can be called with or without local BH being disabled */
+static inline __u16	inet_getid(struct inet_peer *p, int more)
+{
+	__u16 id;
+
+	spin_lock_bh(&inet_peer_idlock);
+	id = p->ip_id_count;
+	p->ip_id_count += 1 + more;
+	spin_unlock_bh(&inet_peer_idlock);
+	return id;
+}
+
+#endif /* _NET_INETPEER_H */
diff --git a/include/net/ip.h b/include/net/ip.h
new file mode 100644
index 000000000000..b4db1375da2c
--- /dev/null
+++ b/include/net/ip.h
@@ -0,0 +1,353 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP module.
+ *
+ * Version:	@(#)ip.h	1.0.2	05/07/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ * Changes:
+ *		Mike McLagan    :       Routing by source
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _IP_H
+#define _IP_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/in_route.h>
+#include <net/route.h>
+#include <net/arp.h>
+#include <net/snmp.h>
+
+struct sock;
+
+struct inet_skb_parm
+{
+	struct ip_options	opt;		/* Compiled IP options		*/
+	unsigned char		flags;
+
+#define IPSKB_MASQUERADED	1
+#define IPSKB_TRANSLATED	2
+#define IPSKB_FORWARDED		4
+#define IPSKB_XFRM_TUNNEL_SIZE	8
+};
+
+struct ipcm_cookie
+{
+	u32			addr;
+	int			oif;
+	struct ip_options	*opt;
+};
+
+#define IPCB(skb) ((struct inet_skb_parm*)((skb)->cb))
+
+struct ip_ra_chain
+{
+	struct ip_ra_chain	*next;
+	struct sock		*sk;
+	void			(*destructor)(struct sock *);
+};
+
+extern struct ip_ra_chain *ip_ra_chain;
+extern rwlock_t ip_ra_lock;
+
+/* IP flags. */
+#define IP_CE		0x8000		/* Flag: "Congestion"		*/
+#define IP_DF		0x4000		/* Flag: "Don't Fragment"	*/
+#define IP_MF		0x2000		/* Flag: "More Fragments"	*/
+#define IP_OFFSET	0x1FFF		/* "Fragment Offset" part	*/
+
+#define IP_FRAG_TIME	(30 * HZ)		/* fragment lifetime	*/
+
+extern void		ip_mc_dropsocket(struct sock *);
+extern void		ip_mc_dropdevice(struct net_device *dev);
+extern int		igmp_mc_proc_init(void);
+
+/*
+ *	Functions provided by ip.c
+ */
+
+extern int		ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
+					      u32 saddr, u32 daddr,
+					      struct ip_options *opt);
+extern int		ip_rcv(struct sk_buff *skb, struct net_device *dev,
+			       struct packet_type *pt);
+extern int		ip_local_deliver(struct sk_buff *skb);
+extern int		ip_mr_input(struct sk_buff *skb);
+extern int		ip_output(struct sk_buff *skb);
+extern int		ip_mc_output(struct sk_buff *skb);
+extern int		ip_fragment(struct sk_buff *skb, int (*out)(struct sk_buff*));
+extern int		ip_do_nat(struct sk_buff *skb);
+extern void		ip_send_check(struct iphdr *ip);
+extern int		ip_queue_xmit(struct sk_buff *skb, int ipfragok);
+extern void		ip_init(void);
+extern int		ip_append_data(struct sock *sk,
+				       int getfrag(void *from, char *to, int offset, int len,
+						   int odd, struct sk_buff *skb),
+				void *from, int len, int protolen,
+				struct ipcm_cookie *ipc,
+				struct rtable *rt,
+				unsigned int flags);
+extern int		ip_generic_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb);
+extern ssize_t		ip_append_page(struct sock *sk, struct page *page,
+				int offset, size_t size, int flags);
+extern int		ip_push_pending_frames(struct sock *sk);
+extern void		ip_flush_pending_frames(struct sock *sk);
+
+/* datagram.c */
+extern int		ip4_datagram_connect(struct sock *sk, 
+					     struct sockaddr *uaddr, int addr_len);
+
+/*
+ *	Map a multicast IP onto multicast MAC for type Token Ring.
+ *      This conforms to RFC1469 Option 2 Multicasting i.e.
+ *      using a functional address to transmit / receive 
+ *      multicast packets.
+ */
+
+static inline void ip_tr_mc_map(u32 addr, char *buf)
+{
+	buf[0]=0xC0;
+	buf[1]=0x00;
+	buf[2]=0x00;
+	buf[3]=0x04;
+	buf[4]=0x00;
+	buf[5]=0x00;
+}
+
+struct ip_reply_arg {
+	struct kvec iov[1];   
+	u32 	    csum; 
+	int	    csumoffset; /* u16 offset of csum in iov[0].iov_base */
+				/* -1 if not needed */ 
+}; 
+
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
+		   unsigned int len); 
+
+extern int ip_finish_output(struct sk_buff *skb);
+
+struct ipv4_config
+{
+	int	log_martians;
+	int	autoconfig;
+	int	no_pmtu_disc;
+};
+
+extern struct ipv4_config ipv4_config;
+DECLARE_SNMP_STAT(struct ipstats_mib, ip_statistics);
+#define IP_INC_STATS(field)		SNMP_INC_STATS(ip_statistics, field)
+#define IP_INC_STATS_BH(field)		SNMP_INC_STATS_BH(ip_statistics, field)
+#define IP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(ip_statistics, field)
+DECLARE_SNMP_STAT(struct linux_mib, net_statistics);
+#define NET_INC_STATS(field)		SNMP_INC_STATS(net_statistics, field)
+#define NET_INC_STATS_BH(field)		SNMP_INC_STATS_BH(net_statistics, field)
+#define NET_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(net_statistics, field)
+#define NET_ADD_STATS_BH(field, adnd)	SNMP_ADD_STATS_BH(net_statistics, field, adnd)
+#define NET_ADD_STATS_USER(field, adnd)	SNMP_ADD_STATS_USER(net_statistics, field, adnd)
+
+extern int sysctl_local_port_range[2];
+extern int sysctl_ip_default_ttl;
+
+#ifdef CONFIG_INET
+/* The function in 2.2 was invalid, producing wrong result for
+ * check=0xFEFF. It was noticed by Arthur Skawina _year_ ago. --ANK(000625) */
+static inline
+int ip_decrease_ttl(struct iphdr *iph)
+{
+	u32 check = iph->check;
+	check += htons(0x0100);
+	iph->check = check + (check>=0xFFFF);
+	return --iph->ttl;
+}
+
+static inline
+int ip_dont_fragment(struct sock *sk, struct dst_entry *dst)
+{
+	return (inet_sk(sk)->pmtudisc == IP_PMTUDISC_DO ||
+		(inet_sk(sk)->pmtudisc == IP_PMTUDISC_WANT &&
+		 !(dst_metric(dst, RTAX_LOCK)&(1<<RTAX_MTU))));
+}
+
+extern void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more);
+
+static inline void ip_select_ident(struct iphdr *iph, struct dst_entry *dst, struct sock *sk)
+{
+	if (iph->frag_off & htons(IP_DF)) {
+		/* This is only to work around buggy Windows95/2000
+		 * VJ compression implementations.  If the ID field
+		 * does not change, they drop every other packet in
+		 * a TCP stream using header compression.
+		 */
+		iph->id = (sk && inet_sk(sk)->daddr) ?
+					htons(inet_sk(sk)->id++) : 0;
+	} else
+		__ip_select_ident(iph, dst, 0);
+}
+
+static inline void ip_select_ident_more(struct iphdr *iph, struct dst_entry *dst, struct sock *sk, int more)
+{
+	if (iph->frag_off & htons(IP_DF)) {
+		if (sk && inet_sk(sk)->daddr) {
+			iph->id = htons(inet_sk(sk)->id);
+			inet_sk(sk)->id += 1 + more;
+		} else
+			iph->id = 0;
+	} else
+		__ip_select_ident(iph, dst, more);
+}
+
+/*
+ *	Map a multicast IP onto multicast MAC for type ethernet.
+ */
+
+static inline void ip_eth_mc_map(u32 addr, char *buf)
+{
+	addr=ntohl(addr);
+	buf[0]=0x01;
+	buf[1]=0x00;
+	buf[2]=0x5e;
+	buf[5]=addr&0xFF;
+	addr>>=8;
+	buf[4]=addr&0xFF;
+	addr>>=8;
+	buf[3]=addr&0x7F;
+}
+
+/*
+ *	Map a multicast IP onto multicast MAC for type IP-over-InfiniBand.
+ *	Leave P_Key as 0 to be filled in by driver.
+ */
+
+static inline void ip_ib_mc_map(u32 addr, char *buf)
+{
+	buf[0]  = 0;		/* Reserved */
+	buf[1]  = 0xff;		/* Multicast QPN */
+	buf[2]  = 0xff;
+	buf[3]  = 0xff;
+	addr    = ntohl(addr);
+	buf[4]  = 0xff;
+	buf[5]  = 0x12;		/* link local scope */
+	buf[6]  = 0x40;		/* IPv4 signature */
+	buf[7]  = 0x1b;
+	buf[8]  = 0;		/* P_Key */
+	buf[9]  = 0;
+	buf[10] = 0;
+	buf[11] = 0;
+	buf[12] = 0;
+	buf[13] = 0;
+	buf[14] = 0;
+	buf[15] = 0;
+	buf[19] = addr & 0xff;
+	addr  >>= 8;
+	buf[18] = addr & 0xff;
+	addr  >>= 8;
+	buf[17] = addr & 0xff;
+	addr  >>= 8;
+	buf[16] = addr & 0x0f;
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#include <linux/ipv6.h>
+#endif
+
+static __inline__ void inet_reset_saddr(struct sock *sk)
+{
+	inet_sk(sk)->rcv_saddr = inet_sk(sk)->saddr = 0;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	if (sk->sk_family == PF_INET6) {
+		struct ipv6_pinfo *np = inet6_sk(sk);
+
+		memset(&np->saddr, 0, sizeof(np->saddr));
+		memset(&np->rcv_saddr, 0, sizeof(np->rcv_saddr));
+	}
+#endif
+}
+
+#endif
+
+extern int	ip_call_ra_chain(struct sk_buff *skb);
+
+/*
+ *	Functions provided by ip_fragment.o
+ */
+
+enum ip_defrag_users
+{
+	IP_DEFRAG_LOCAL_DELIVER,
+	IP_DEFRAG_CALL_RA_CHAIN,
+	IP_DEFRAG_CONNTRACK_IN,
+	IP_DEFRAG_CONNTRACK_OUT,
+	IP_DEFRAG_NAT_OUT,
+	IP_DEFRAG_VS_IN,
+	IP_DEFRAG_VS_OUT,
+	IP_DEFRAG_VS_FWD
+};
+
+struct sk_buff *ip_defrag(struct sk_buff *skb, u32 user);
+extern int ip_frag_nqueues;
+extern atomic_t ip_frag_mem;
+
+/*
+ *	Functions provided by ip_forward.c
+ */
+ 
+extern int ip_forward(struct sk_buff *skb);
+extern int ip_net_unreachable(struct sk_buff *skb);
+ 
+/*
+ *	Functions provided by ip_options.c
+ */
+ 
+extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt, u32 daddr, struct rtable *rt, int is_frag);
+extern int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb);
+extern void ip_options_fragment(struct sk_buff *skb);
+extern int ip_options_compile(struct ip_options *opt, struct sk_buff *skb);
+extern int ip_options_get(struct ip_options **optp, unsigned char *data, int optlen, int user);
+extern void ip_options_undo(struct ip_options * opt);
+extern void ip_forward_options(struct sk_buff *skb);
+extern int ip_options_rcv_srr(struct sk_buff *skb);
+
+/*
+ *	Functions provided by ip_sockglue.c
+ */
+
+extern void	ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb);
+extern int	ip_cmsg_send(struct msghdr *msg, struct ipcm_cookie *ipc);
+extern int	ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen);
+extern int	ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen);
+extern int	ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
+
+extern int 	ip_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern void	ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, 
+			      u16 port, u32 info, u8 *payload);
+extern void	ip_local_error(struct sock *sk, int err, u32 daddr, u16 dport,
+			       u32 info);
+
+/* sysctl helpers - any sysctl which holds a value that ends up being
+ * fed into the routing cache should use these handlers.
+ */
+int ipv4_doint_and_flush(ctl_table *ctl, int write,
+			 struct file* filp, void __user *buffer,
+			 size_t *lenp, loff_t *ppos);
+int ipv4_doint_and_flush_strategy(ctl_table *table, int __user *name, int nlen,
+				  void __user *oldval, size_t __user *oldlenp,
+				  void __user *newval, size_t newlen, 
+				  void **context);
+
+#endif	/* _IP_H */
diff --git a/include/net/ip6_checksum.h b/include/net/ip6_checksum.h
new file mode 100644
index 000000000000..3dfc885bdf25
--- /dev/null
+++ b/include/net/ip6_checksum.h
@@ -0,0 +1,94 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Checksumming functions for IPv6
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Borrows very liberally from tcp.c and ip.c, see those
+ *		files for more names.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+/*
+ *	Fixes:
+ *
+ *	Ralf Baechle			:	generic ipv6 checksum
+ *	<ralf@waldorf-gmbh.de>
+ */
+
+#ifndef _CHECKSUM_IPV6_H
+#define _CHECKSUM_IPV6_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <net/ip.h>
+#include <asm/checksum.h>
+#include <linux/in6.h>
+
+#ifndef _HAVE_ARCH_IPV6_CSUM
+
+static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
+						     struct in6_addr *daddr,
+						     __u16 len,
+						     unsigned short proto,
+						     unsigned int csum) 
+{
+
+	int carry;
+	__u32 ulen;
+	__u32 uproto;
+
+	csum += saddr->s6_addr32[0];
+	carry = (csum < saddr->s6_addr32[0]);
+	csum += carry;
+
+	csum += saddr->s6_addr32[1];
+	carry = (csum < saddr->s6_addr32[1]);
+	csum += carry;
+
+	csum += saddr->s6_addr32[2];
+	carry = (csum < saddr->s6_addr32[2]);
+	csum += carry;
+
+	csum += saddr->s6_addr32[3];
+	carry = (csum < saddr->s6_addr32[3]);
+	csum += carry;
+
+	csum += daddr->s6_addr32[0];
+	carry = (csum < daddr->s6_addr32[0]);
+	csum += carry;
+
+	csum += daddr->s6_addr32[1];
+	carry = (csum < daddr->s6_addr32[1]);
+	csum += carry;
+
+	csum += daddr->s6_addr32[2];
+	carry = (csum < daddr->s6_addr32[2]);
+	csum += carry;
+
+	csum += daddr->s6_addr32[3];
+	carry = (csum < daddr->s6_addr32[3]);
+	csum += carry;
+
+	ulen = htonl((__u32) len);
+	csum += ulen;
+	carry = (csum < ulen);
+	csum += carry;
+
+	uproto = htonl(proto);
+	csum += uproto;
+	carry = (csum < uproto);
+	csum += carry;
+
+	return csum_fold(csum);
+}
+
+#endif
+#endif
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
new file mode 100644
index 000000000000..319904518194
--- /dev/null
+++ b/include/net/ip6_fib.h
@@ -0,0 +1,185 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _IP6_FIB_H
+#define _IP6_FIB_H
+
+#ifdef __KERNEL__
+
+#include <linux/ipv6_route.h>
+
+#include <net/dst.h>
+#include <net/flow.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+
+struct rt6_info;
+
+struct fib6_node
+{
+	struct fib6_node	*parent;
+	struct fib6_node	*left;
+	struct fib6_node	*right;
+
+	struct fib6_node	*subtree;
+
+	struct rt6_info		*leaf;
+
+	__u16			fn_bit;		/* bit key */
+	__u16			fn_flags;
+	__u32			fn_sernum;
+};
+
+
+/*
+ *	routing information
+ *
+ */
+
+struct rt6key
+{
+	struct in6_addr	addr;
+	int		plen;
+};
+
+struct rt6_info
+{
+	union {
+		struct dst_entry	dst;
+		struct rt6_info		*next;
+	} u;
+
+	struct inet6_dev		*rt6i_idev;
+
+#define rt6i_dev			u.dst.dev
+#define rt6i_nexthop			u.dst.neighbour
+#define rt6i_expires			u.dst.expires
+
+	struct fib6_node		*rt6i_node;
+
+	struct in6_addr			rt6i_gateway;
+	
+	u32				rt6i_flags;
+	u32				rt6i_metric;
+	atomic_t			rt6i_ref;
+
+	struct rt6key			rt6i_dst;
+	struct rt6key			rt6i_src;
+
+	u8				rt6i_protocol;
+};
+
+struct fib6_walker_t
+{
+	struct fib6_walker_t *prev, *next;
+	struct fib6_node *root, *node;
+	struct rt6_info *leaf;
+	unsigned char state;
+	unsigned char prune;
+	int (*func)(struct fib6_walker_t *);
+	void *args;
+};
+
+extern struct fib6_walker_t fib6_walker_list;
+extern rwlock_t fib6_walker_lock;
+
+static inline void fib6_walker_link(struct fib6_walker_t *w)
+{
+	write_lock_bh(&fib6_walker_lock);
+	w->next = fib6_walker_list.next;
+	w->prev = &fib6_walker_list;
+	w->next->prev = w;
+	w->prev->next = w;
+	write_unlock_bh(&fib6_walker_lock);
+}
+
+static inline void fib6_walker_unlink(struct fib6_walker_t *w)
+{
+	write_lock_bh(&fib6_walker_lock);
+	w->next->prev = w->prev;
+	w->prev->next = w->next;
+	w->prev = w->next = w;
+	write_unlock_bh(&fib6_walker_lock);
+}
+
+struct rt6_statistics {
+	__u32		fib_nodes;
+	__u32		fib_route_nodes;
+	__u32		fib_rt_alloc;		/* permanent routes	*/
+	__u32		fib_rt_entries;		/* rt entries in table	*/
+	__u32		fib_rt_cache;		/* cache routes		*/
+	__u32		fib_discarded_routes;
+};
+
+#define RTN_TL_ROOT	0x0001
+#define RTN_ROOT	0x0002		/* tree root node		*/
+#define RTN_RTINFO	0x0004		/* node with valid routing info	*/
+
+/*
+ *	priority levels (or metrics)
+ *
+ */
+
+#define RTPRI_FIREWALL	8		/* Firewall control information	*/
+#define RTPRI_FLOW	16		/* Flow based forwarding rules	*/
+#define RTPRI_KERN_CTL	32		/* Kernel control routes	*/
+
+#define RTPRI_USER_MIN	256		/* Mimimum user priority	*/
+#define RTPRI_USER_MAX	1024		/* Maximum user priority	*/
+
+#define RTPRI_KERN_DFLT	4096		/* Kernel default routes	*/
+
+#define	MAX_FLOW_BACKTRACE	32
+
+
+typedef void			(*f_pnode)(struct fib6_node *fn, void *);
+
+extern struct fib6_node		ip6_routing_table;
+
+/*
+ *	exported functions
+ */
+
+extern struct fib6_node		*fib6_lookup(struct fib6_node *root,
+					     struct in6_addr *daddr,
+					     struct in6_addr *saddr);
+
+struct fib6_node		*fib6_locate(struct fib6_node *root,
+					     struct in6_addr *daddr, int dst_len,
+					     struct in6_addr *saddr, int src_len);
+
+extern void			fib6_clean_tree(struct fib6_node *root,
+						int (*func)(struct rt6_info *, void *arg),
+						int prune, void *arg);
+
+extern int			fib6_walk(struct fib6_walker_t *w);
+extern int			fib6_walk_continue(struct fib6_walker_t *w);
+
+extern int			fib6_add(struct fib6_node *root,
+					 struct rt6_info *rt,
+					 struct nlmsghdr *nlh,
+					 void *rtattr);
+
+extern int			fib6_del(struct rt6_info *rt,
+					 struct nlmsghdr *nlh,
+					 void *rtattr);
+
+extern void			inet6_rt_notify(int event, struct rt6_info *rt,
+						struct nlmsghdr *nlh);
+
+extern void			fib6_run_gc(unsigned long dummy);
+
+extern void			fib6_gc_cleanup(void);
+
+extern void			fib6_init(void);
+#endif
+#endif
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
new file mode 100644
index 000000000000..d5d1dd10cdb8
--- /dev/null
+++ b/include/net/ip6_route.h
@@ -0,0 +1,141 @@
+#ifndef _NET_IP6_ROUTE_H
+#define _NET_IP6_ROUTE_H
+
+#define IP6_RT_PRIO_FW		16
+#define IP6_RT_PRIO_USER	1024
+#define IP6_RT_PRIO_ADDRCONF	256
+#define IP6_RT_PRIO_KERN	512
+#define IP6_RT_FLOW_MASK	0x00ff
+
+#ifdef __KERNEL__
+
+#include <net/flow.h>
+#include <net/ip6_fib.h>
+#include <net/sock.h>
+#include <linux/tcp.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+struct pol_chain {
+	int			type;
+	int			priority;
+	struct fib6_node	*rules;
+	struct pol_chain	*next;
+};
+
+extern struct rt6_info	ip6_null_entry;
+
+extern int ip6_rt_gc_interval;
+
+extern void			ip6_route_input(struct sk_buff *skb);
+
+extern struct dst_entry *	ip6_route_output(struct sock *sk,
+						 struct flowi *fl);
+
+extern int			ip6_route_me_harder(struct sk_buff *skb);
+
+extern void			ip6_route_init(void);
+extern void			ip6_route_cleanup(void);
+
+extern int			ipv6_route_ioctl(unsigned int cmd, void __user *arg);
+
+extern int			ip6_route_add(struct in6_rtmsg *rtmsg,
+					      struct nlmsghdr *,
+					      void *rtattr);
+extern int			ip6_ins_rt(struct rt6_info *,
+					   struct nlmsghdr *,
+					   void *rtattr);
+extern int			ip6_del_rt(struct rt6_info *,
+					   struct nlmsghdr *,
+					   void *rtattr);
+
+extern int			ip6_rt_addr_add(struct in6_addr *addr,
+						struct net_device *dev,
+						int anycast);
+
+extern int			ip6_rt_addr_del(struct in6_addr *addr,
+						struct net_device *dev);
+
+extern void			rt6_sndmsg(int type, struct in6_addr *dst,
+					   struct in6_addr *src,
+					   struct in6_addr *gw,
+					   struct net_device *dev, 
+					   int dstlen, int srclen,
+					   int metric, __u32 flags);
+
+extern struct rt6_info		*rt6_lookup(struct in6_addr *daddr,
+					    struct in6_addr *saddr,
+					    int oif, int flags);
+
+extern struct dst_entry *ndisc_dst_alloc(struct net_device *dev,
+					 struct neighbour *neigh,
+					 struct in6_addr *addr,
+					 int (*output)(struct sk_buff *));
+extern int ndisc_dst_gc(int *more);
+extern void fib6_force_start_gc(void);
+
+extern struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
+					   const struct in6_addr *addr,
+					   int anycast);
+
+/*
+ *	support functions for ND
+ *
+ */
+extern struct rt6_info *	rt6_get_dflt_router(struct in6_addr *addr,
+						    struct net_device *dev);
+extern struct rt6_info *	rt6_add_dflt_router(struct in6_addr *gwaddr,
+						    struct net_device *dev);
+
+extern void			rt6_purge_dflt_routers(void);
+
+extern void			rt6_reset_dflt_pointer(struct rt6_info *rt);
+
+extern void			rt6_redirect(struct in6_addr *dest,
+					     struct in6_addr *saddr,
+					     struct neighbour *neigh,
+					     u8 *lladdr,
+					     int on_link);
+
+extern void			rt6_pmtu_discovery(struct in6_addr *daddr,
+						   struct in6_addr *saddr,
+						   struct net_device *dev,
+						   u32 pmtu);
+
+struct nlmsghdr;
+struct netlink_callback;
+extern int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb);
+extern int inet6_rtm_newroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet6_rtm_delroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet6_rtm_getroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+
+extern void rt6_ifdown(struct net_device *dev);
+extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
+
+extern rwlock_t rt6_lock;
+
+/*
+ *	Store a destination cache entry in a socket
+ */
+static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
+				     struct in6_addr *daddr)
+{
+	struct ipv6_pinfo *np = inet6_sk(sk);
+	struct rt6_info *rt = (struct rt6_info *) dst;
+
+	write_lock(&sk->sk_dst_lock);
+	__sk_dst_set(sk, dst);
+	np->daddr_cache = daddr;
+	np->dst_cookie = rt->rt6i_node ? rt->rt6i_node->fn_sernum : 0;
+	write_unlock(&sk->sk_dst_lock);
+}
+
+static inline int ipv6_unicast_destination(struct sk_buff *skb)
+{
+	struct rt6_info *rt = (struct rt6_info *) skb->dst;
+
+	return rt->rt6i_flags & RTF_LOCAL;
+}
+
+#endif
+#endif
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
new file mode 100644
index 000000000000..29c9da707c7a
--- /dev/null
+++ b/include/net/ip6_tunnel.h
@@ -0,0 +1,40 @@
+/*
+ * $Id$
+ */
+
+#ifndef _NET_IP6_TUNNEL_H
+#define _NET_IP6_TUNNEL_H
+
+#include <linux/ipv6.h>
+#include <linux/netdevice.h>
+#include <linux/ip6_tunnel.h>
+
+/* capable of sending packets */
+#define IP6_TNL_F_CAP_XMIT 0x10000
+/* capable of receiving packets */
+#define IP6_TNL_F_CAP_RCV 0x20000
+
+#define IP6_TNL_MAX 128
+
+/* IPv6 tunnel */
+
+struct ip6_tnl {
+	struct ip6_tnl *next;	/* next tunnel in list */
+	struct net_device *dev;	/* virtual device associated with tunnel */
+	struct net_device_stats stat;	/* statistics for tunnel device */
+	int recursion;		/* depth of hard_start_xmit recursion */
+	struct ip6_tnl_parm parms;	/* tunnel configuration paramters */
+	struct flowi fl;	/* flowi template for xmit */
+	struct dst_entry *dst_cache;    /* cached dst */
+	u32 dst_cookie;
+};
+
+/* Tunnel encapsulation limit destination sub-option */
+
+struct ipv6_tlv_tnl_enc_lim {
+	__u8 type;		/* type-code for option         */
+	__u8 length;		/* option length                */
+	__u8 encap_limit;	/* tunnel encapsulation limit   */
+} __attribute__ ((packed));
+
+#endif
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
new file mode 100644
index 000000000000..e5a5f6b62f88
--- /dev/null
+++ b/include/net/ip_fib.h
@@ -0,0 +1,284 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Forwarding Information Base.
+ *
+ * Authors:	A.N.Kuznetsov, <kuznet@ms2.inr.ac.ru>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IP_FIB_H
+#define _NET_IP_FIB_H
+
+#include <linux/config.h>
+#include <net/flow.h>
+#include <linux/seq_file.h>
+
+/* WARNING: The ordering of these elements must match ordering
+ *          of RTA_* rtnetlink attribute numbers.
+ */
+struct kern_rta {
+	void		*rta_dst;
+	void		*rta_src;
+	int		*rta_iif;
+	int		*rta_oif;
+	void		*rta_gw;
+	u32		*rta_priority;
+	void		*rta_prefsrc;
+	struct rtattr	*rta_mx;
+	struct rtattr	*rta_mp;
+	unsigned char	*rta_protoinfo;
+	u32		*rta_flow;
+	struct rta_cacheinfo *rta_ci;
+	struct rta_session *rta_sess;
+	u32		*rta_mp_alg;
+};
+
+struct fib_info;
+
+struct fib_nh {
+	struct net_device	*nh_dev;
+	struct hlist_node	nh_hash;
+	struct fib_info		*nh_parent;
+	unsigned		nh_flags;
+	unsigned char		nh_scope;
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+	int			nh_weight;
+	int			nh_power;
+#endif
+#ifdef CONFIG_NET_CLS_ROUTE
+	__u32			nh_tclassid;
+#endif
+	int			nh_oif;
+	u32			nh_gw;
+};
+
+/*
+ * This structure contains data shared by many of routes.
+ */
+
+struct fib_info {
+	struct hlist_node	fib_hash;
+	struct hlist_node	fib_lhash;
+	int			fib_treeref;
+	atomic_t		fib_clntref;
+	int			fib_dead;
+	unsigned		fib_flags;
+	int			fib_protocol;
+	u32			fib_prefsrc;
+	u32			fib_priority;
+	u32			fib_metrics[RTAX_MAX];
+#define fib_mtu fib_metrics[RTAX_MTU-1]
+#define fib_window fib_metrics[RTAX_WINDOW-1]
+#define fib_rtt fib_metrics[RTAX_RTT-1]
+#define fib_advmss fib_metrics[RTAX_ADVMSS-1]
+	int			fib_nhs;
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+	int			fib_power;
+#endif
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	u32			fib_mp_alg;
+#endif
+	struct fib_nh		fib_nh[0];
+#define fib_dev		fib_nh[0].nh_dev
+};
+
+
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+struct fib_rule;
+#endif
+
+struct fib_result {
+	unsigned char	prefixlen;
+	unsigned char	nh_sel;
+	unsigned char	type;
+	unsigned char	scope;
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	__u32           network;
+	__u32           netmask;
+#endif
+	struct fib_info *fi;
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	struct fib_rule	*r;
+#endif
+};
+
+
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+
+#define FIB_RES_NH(res)		((res).fi->fib_nh[(res).nh_sel])
+#define FIB_RES_RESET(res)	((res).nh_sel = 0)
+
+#else /* CONFIG_IP_ROUTE_MULTIPATH */
+
+#define FIB_RES_NH(res)		((res).fi->fib_nh[0])
+#define FIB_RES_RESET(res)
+
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+
+#define FIB_RES_PREFSRC(res)		((res).fi->fib_prefsrc ? : __fib_res_prefsrc(&res))
+#define FIB_RES_GW(res)			(FIB_RES_NH(res).nh_gw)
+#define FIB_RES_DEV(res)		(FIB_RES_NH(res).nh_dev)
+#define FIB_RES_OIF(res)		(FIB_RES_NH(res).nh_oif)
+
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+#define FIB_RES_NETWORK(res)		((res).network)
+#define FIB_RES_NETMASK(res)	        ((res).netmask)
+#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
+#define FIB_RES_NETWORK(res)		(0)
+#define FIB_RES_NETMASK(res)	        (0)
+#endif /* CONFIG_IP_ROUTE_MULTIPATH_WRANDOM */
+
+struct fib_table {
+	unsigned char	tb_id;
+	unsigned	tb_stamp;
+	int		(*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
+	int		(*tb_insert)(struct fib_table *table, struct rtmsg *r,
+				     struct kern_rta *rta, struct nlmsghdr *n,
+				     struct netlink_skb_parms *req);
+	int		(*tb_delete)(struct fib_table *table, struct rtmsg *r,
+				     struct kern_rta *rta, struct nlmsghdr *n,
+				     struct netlink_skb_parms *req);
+	int		(*tb_dump)(struct fib_table *table, struct sk_buff *skb,
+				     struct netlink_callback *cb);
+	int		(*tb_flush)(struct fib_table *table);
+	void		(*tb_select_default)(struct fib_table *table,
+					     const struct flowi *flp, struct fib_result *res);
+
+	unsigned char	tb_data[0];
+};
+
+#ifndef CONFIG_IP_MULTIPLE_TABLES
+
+extern struct fib_table *ip_fib_local_table;
+extern struct fib_table *ip_fib_main_table;
+
+static inline struct fib_table *fib_get_table(int id)
+{
+	if (id != RT_TABLE_LOCAL)
+		return ip_fib_main_table;
+	return ip_fib_local_table;
+}
+
+static inline struct fib_table *fib_new_table(int id)
+{
+	return fib_get_table(id);
+}
+
+static inline int fib_lookup(const struct flowi *flp, struct fib_result *res)
+{
+	if (ip_fib_local_table->tb_lookup(ip_fib_local_table, flp, res) &&
+	    ip_fib_main_table->tb_lookup(ip_fib_main_table, flp, res))
+		return -ENETUNREACH;
+	return 0;
+}
+
+static inline void fib_select_default(const struct flowi *flp, struct fib_result *res)
+{
+	if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
+		ip_fib_main_table->tb_select_default(ip_fib_main_table, flp, res);
+}
+
+#else /* CONFIG_IP_MULTIPLE_TABLES */
+#define ip_fib_local_table (fib_tables[RT_TABLE_LOCAL])
+#define ip_fib_main_table (fib_tables[RT_TABLE_MAIN])
+
+extern struct fib_table * fib_tables[RT_TABLE_MAX+1];
+extern int fib_lookup(const struct flowi *flp, struct fib_result *res);
+extern struct fib_table *__fib_new_table(int id);
+extern void fib_rule_put(struct fib_rule *r);
+
+static inline struct fib_table *fib_get_table(int id)
+{
+	if (id == 0)
+		id = RT_TABLE_MAIN;
+
+	return fib_tables[id];
+}
+
+static inline struct fib_table *fib_new_table(int id)
+{
+	if (id == 0)
+		id = RT_TABLE_MAIN;
+
+	return fib_tables[id] ? : __fib_new_table(id);
+}
+
+extern void fib_select_default(const struct flowi *flp, struct fib_result *res);
+
+#endif /* CONFIG_IP_MULTIPLE_TABLES */
+
+/* Exported by fib_frontend.c */
+extern void		ip_fib_init(void);
+extern int inet_rtm_delroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet_rtm_newroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet_rtm_getroute(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet_dump_fib(struct sk_buff *skb, struct netlink_callback *cb);
+extern int fib_validate_source(u32 src, u32 dst, u8 tos, int oif,
+			       struct net_device *dev, u32 *spec_dst, u32 *itag);
+extern void fib_select_multipath(const struct flowi *flp, struct fib_result *res);
+
+/* Exported by fib_semantics.c */
+extern int ip_fib_check_default(u32 gw, struct net_device *dev);
+extern int fib_sync_down(u32 local, struct net_device *dev, int force);
+extern int fib_sync_up(struct net_device *dev);
+extern int fib_convert_rtentry(int cmd, struct nlmsghdr *nl, struct rtmsg *rtm,
+			       struct kern_rta *rta, struct rtentry *r);
+extern u32  __fib_res_prefsrc(struct fib_result *res);
+
+/* Exported by fib_hash.c */
+extern struct fib_table *fib_hash_init(int id);
+
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+/* Exported by fib_rules.c */
+
+extern int inet_rtm_delrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet_rtm_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg);
+extern int inet_dump_rules(struct sk_buff *skb, struct netlink_callback *cb);
+#ifdef CONFIG_NET_CLS_ROUTE
+extern u32 fib_rules_tclass(struct fib_result *res);
+#endif
+extern void fib_rules_init(void);
+#endif
+
+static inline void fib_combine_itag(u32 *itag, struct fib_result *res)
+{
+#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	u32 rtag;
+#endif
+	*itag = FIB_RES_NH(*res).nh_tclassid<<16;
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	rtag = fib_rules_tclass(res);
+	if (*itag == 0)
+		*itag = (rtag<<16);
+	*itag |= (rtag>>16);
+#endif
+#endif
+}
+
+extern void free_fib_info(struct fib_info *fi);
+
+static inline void fib_info_put(struct fib_info *fi)
+{
+	if (atomic_dec_and_test(&fi->fib_clntref))
+		free_fib_info(fi);
+}
+
+static inline void fib_res_put(struct fib_result *res)
+{
+	if (res->fi)
+		fib_info_put(res->fi);
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	if (res->r)
+		fib_rule_put(res->r);
+#endif
+}
+
+#endif  /* _NET_FIB_H */
diff --git a/include/net/ip_mp_alg.h b/include/net/ip_mp_alg.h
new file mode 100644
index 000000000000..77225735cbd4
--- /dev/null
+++ b/include/net/ip_mp_alg.h
@@ -0,0 +1,99 @@
+/* ip_mp_alg.h: IPV4 multipath algorithm support.
+ *
+ * Copyright (C) 2004, 2005 Einar Lueck <elueck@de.ibm.com>
+ * Copyright (C) 2005 David S. Miller <davem@davemloft.net>
+ */
+
+#ifndef _NET_IP_MP_ALG_H
+#define _NET_IP_MP_ALG_H
+
+#include <linux/config.h>
+#include <linux/ip_mp_alg.h>
+#include <net/flow.h>
+#include <net/route.h>
+
+struct fib_nh;
+
+struct ip_mp_alg_ops {
+	void	(*mp_alg_select_route)(const struct flowi *flp,
+				       struct rtable *rth, struct rtable **rp);
+	void	(*mp_alg_flush)(void);
+	void	(*mp_alg_set_nhinfo)(__u32 network, __u32 netmask,
+				     unsigned char prefixlen,
+				     const struct fib_nh *nh);
+	void	(*mp_alg_remove)(struct rtable *rth);
+};
+
+extern int multipath_alg_register(struct ip_mp_alg_ops *, enum ip_mp_alg);
+extern void multipath_alg_unregister(struct ip_mp_alg_ops *, enum ip_mp_alg);
+
+extern struct ip_mp_alg_ops *ip_mp_alg_table[];
+
+static inline int multipath_select_route(const struct flowi *flp,
+					 struct rtable *rth,
+					 struct rtable **rp)
+{
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
+
+	/* mp_alg_select_route _MUST_ be implemented */
+	if (ops && (rth->u.dst.flags & DST_BALANCED)) {
+		ops->mp_alg_select_route(flp, rth, rp);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+static inline void multipath_flush(void)
+{
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	int i;
+
+	for (i = IP_MP_ALG_NONE; i <= IP_MP_ALG_MAX; i++) {
+		struct ip_mp_alg_ops *ops = ip_mp_alg_table[i];
+
+		if (ops && ops->mp_alg_flush)
+			ops->mp_alg_flush();
+	}
+#endif
+}
+
+static inline void multipath_set_nhinfo(struct rtable *rth,
+					__u32 network, __u32 netmask,
+					unsigned char prefixlen,
+					const struct fib_nh *nh)
+{
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
+
+	if (ops && ops->mp_alg_set_nhinfo)
+		ops->mp_alg_set_nhinfo(network, netmask, prefixlen, nh);
+#endif
+}
+
+static inline void multipath_remove(struct rtable *rth)
+{
+#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
+	struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
+
+	if (ops && ops->mp_alg_remove &&
+	    (rth->u.dst.flags & DST_BALANCED))
+		ops->mp_alg_remove(rth);
+#endif
+}
+
+static inline int multipath_comparekeys(const struct flowi *flp1,
+					const struct flowi *flp2)
+{
+	return flp1->fl4_dst == flp2->fl4_dst &&
+		flp1->fl4_src == flp2->fl4_src &&
+		flp1->oif == flp2->oif &&
+#ifdef CONFIG_IP_ROUTE_FWMARK
+		flp1->fl4_fwmark == flp2->fl4_fwmark &&
+#endif
+		!((flp1->fl4_tos ^ flp2->fl4_tos) &
+		  (IPTOS_RT_MASK | RTO_ONLINK));
+}
+
+#endif /* _NET_IP_MP_ALG_H */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
new file mode 100644
index 000000000000..52da5d26617a
--- /dev/null
+++ b/include/net/ip_vs.h
@@ -0,0 +1,999 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <asm/types.h>		/* For __uXX types */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+
+/* Move it to better place one day, for now keep it unique */
+#define NFC_IPVS_PROPERTY	0x10000
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	u_int16_t		protocol;
+	u_int32_t		addr;		/* virtual ip address */
+	u_int16_t		port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	u_int32_t		netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	u_int32_t		addr;
+	u_int16_t		port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user
+{
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	u_int32_t		addr;		/* virtual address */
+	u_int16_t		port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;          /* virtual service flags */
+	unsigned		timeout;	/* persistent timeout */
+	u_int32_t		netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	u_int32_t		addr;		/* destination address */
+	u_int16_t		port;
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+
+	u_int32_t		activeconns;	/* active connections */
+	u_int32_t		inactconns;	/* inactive connections */
+	u_int32_t		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	u_int32_t		addr;		/* virtual address */
+	u_int16_t		port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/list.h>                 /* for struct list_head */
+#include <linux/spinlock.h>             /* for struct rwlock_t */
+#include <linux/skbuff.h>               /* for struct sk_buff */
+#include <linux/ip.h>                   /* for struct iphdr */
+#include <asm/atomic.h>                 /* for struct atomic_t */
+#include <linux/netdevice.h>		/* for struct neighbour */
+#include <net/dst.h>			/* for struct dst_entry */
+#include <net/tcp.h>
+#include <net/udp.h>
+#include <linux/compiler.h>
+
+
+#ifdef CONFIG_IP_VS_DEBUG
+extern int ip_vs_get_debug_level(void);
+#define IP_VS_DBG(level, msg...)			\
+    do {						\
+	    if (level <= ip_vs_get_debug_level())	\
+		    printk(KERN_DEBUG "IPVS: " msg);	\
+    } while (0)
+#define IP_VS_DBG_RL(msg...)				\
+    do {						\
+	    if (net_ratelimit())			\
+		    printk(KERN_DEBUG "IPVS: " msg);	\
+    } while (0)
+#define IP_VS_DBG_PKT(level, pp, skb, ofs, msg)		\
+    do {						\
+	    if (level <= ip_vs_get_debug_level())	\
+		pp->debug_packet(pp, skb, ofs, msg);	\
+    } while (0)
+#define IP_VS_DBG_RL_PKT(level, pp, skb, ofs, msg)	\
+    do {						\
+	    if (level <= ip_vs_get_debug_level() &&	\
+		net_ratelimit())			\
+		pp->debug_packet(pp, skb, ofs, msg);	\
+    } while (0)
+#else	/* NO DEBUGGING at ALL */
+#define IP_VS_DBG(level, msg...)  do {} while (0)
+#define IP_VS_DBG_RL(msg...)  do {} while (0)
+#define IP_VS_DBG_PKT(level, pp, skb, ofs, msg)		do {} while (0)
+#define IP_VS_DBG_RL_PKT(level, pp, skb, ofs, msg)	do {} while (0)
+#endif
+
+#define IP_VS_BUG() BUG()
+#define IP_VS_ERR(msg...) printk(KERN_ERR "IPVS: " msg)
+#define IP_VS_INFO(msg...) printk(KERN_INFO "IPVS: " msg)
+#define IP_VS_WARNING(msg...) \
+	printk(KERN_WARNING "IPVS: " msg)
+#define IP_VS_ERR_RL(msg...)				\
+    do {						\
+	    if (net_ratelimit())			\
+		    printk(KERN_ERR "IPVS: " msg);	\
+    } while (0)
+
+#ifdef CONFIG_IP_VS_DEBUG
+#define EnterFunction(level)						\
+    do {								\
+	    if (level <= ip_vs_get_debug_level())			\
+		    printk(KERN_DEBUG "Enter: %s, %s line %i\n",	\
+			   __FUNCTION__, __FILE__, __LINE__);		\
+    } while (0)
+#define LeaveFunction(level)                                            \
+    do {                                                                \
+	    if (level <= ip_vs_get_debug_level())                       \
+			printk(KERN_DEBUG "Leave: %s, %s line %i\n",    \
+			       __FUNCTION__, __FILE__, __LINE__);       \
+    } while (0)
+#else
+#define EnterFunction(level)   do {} while (0)
+#define LeaveFunction(level)   do {} while (0)
+#endif
+
+#define	IP_VS_WAIT_WHILE(expr)	while (expr) { cpu_relax(); }
+
+
+/*
+ *      The port number of FTP service (in network order).
+ */
+#define FTPPORT  __constant_htons(21)
+#define FTPDATA  __constant_htons(20)
+
+/*
+ *      IPVS sysctl variables under the /proc/sys/net/ipv4/vs/
+ */
+#define NET_IPV4_VS              21
+
+enum {
+	NET_IPV4_VS_DEBUG_LEVEL=1,
+	NET_IPV4_VS_AMEMTHRESH=2,
+	NET_IPV4_VS_AMDROPRATE=3,
+	NET_IPV4_VS_DROP_ENTRY=4,
+	NET_IPV4_VS_DROP_PACKET=5,
+	NET_IPV4_VS_SECURE_TCP=6,
+	NET_IPV4_VS_TO_ES=7,
+	NET_IPV4_VS_TO_SS=8,
+	NET_IPV4_VS_TO_SR=9,
+	NET_IPV4_VS_TO_FW=10,
+	NET_IPV4_VS_TO_TW=11,
+	NET_IPV4_VS_TO_CL=12,
+	NET_IPV4_VS_TO_CW=13,
+	NET_IPV4_VS_TO_LA=14,
+	NET_IPV4_VS_TO_LI=15,
+	NET_IPV4_VS_TO_SA=16,
+	NET_IPV4_VS_TO_UDP=17,
+	NET_IPV4_VS_TO_ICMP=18,
+	NET_IPV4_VS_LBLC_EXPIRE=19,
+	NET_IPV4_VS_LBLCR_EXPIRE=20,
+	NET_IPV4_VS_CACHE_BYPASS=22,
+	NET_IPV4_VS_EXPIRE_NODEST_CONN=23,
+	NET_IPV4_VS_SYNC_THRESHOLD=24,
+	NET_IPV4_VS_NAT_ICMP_SEND=25,
+	NET_IPV4_VS_EXPIRE_QUIESCENT_TEMPLATE=26,
+	NET_IPV4_VS_LAST
+};
+
+/*
+ *      TCP State Values
+ */
+enum {
+	IP_VS_TCP_S_NONE = 0,
+	IP_VS_TCP_S_ESTABLISHED,
+	IP_VS_TCP_S_SYN_SENT,
+	IP_VS_TCP_S_SYN_RECV,
+	IP_VS_TCP_S_FIN_WAIT,
+	IP_VS_TCP_S_TIME_WAIT,
+	IP_VS_TCP_S_CLOSE,
+	IP_VS_TCP_S_CLOSE_WAIT,
+	IP_VS_TCP_S_LAST_ACK,
+	IP_VS_TCP_S_LISTEN,
+	IP_VS_TCP_S_SYNACK,
+	IP_VS_TCP_S_LAST
+};
+
+/*
+ *	UDP State Values
+ */
+enum {
+	IP_VS_UDP_S_NORMAL,
+	IP_VS_UDP_S_LAST,
+};
+
+/*
+ *	ICMP State Values
+ */
+enum {
+	IP_VS_ICMP_S_NORMAL,
+	IP_VS_ICMP_S_LAST,
+};
+
+/*
+ *	Delta sequence info structure
+ *	Each ip_vs_conn has 2 (output AND input seq. changes).
+ *      Only used in the VS/NAT.
+ */
+struct ip_vs_seq {
+	__u32			init_seq;	/* Add delta from this seq */
+	__u32			delta;		/* Delta in sequence numbers */
+	__u32			previous_delta;	/* Delta in sequence numbers
+						   before last resized pkt */
+};
+
+
+/*
+ *	IPVS statistics object
+ */
+struct ip_vs_stats
+{
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+
+	spinlock_t              lock;           /* spin lock */
+};
+
+struct ip_vs_conn;
+struct ip_vs_app;
+
+struct ip_vs_protocol {
+	struct ip_vs_protocol	*next;
+	char			*name;
+	__u16			protocol;
+	int			dont_defrag;
+	atomic_t		appcnt;		/* counter of proto app incs */
+	int			*timeout_table;	/* protocol timeout table */
+
+	void (*init)(struct ip_vs_protocol *pp);
+
+	void (*exit)(struct ip_vs_protocol *pp);
+
+	int (*conn_schedule)(struct sk_buff *skb,
+			     struct ip_vs_protocol *pp,
+			     int *verdict, struct ip_vs_conn **cpp);
+
+	struct ip_vs_conn *
+	(*conn_in_get)(const struct sk_buff *skb,
+		       struct ip_vs_protocol *pp,
+		       const struct iphdr *iph,
+		       unsigned int proto_off,
+		       int inverse);
+
+	struct ip_vs_conn *
+	(*conn_out_get)(const struct sk_buff *skb,
+			struct ip_vs_protocol *pp,
+			const struct iphdr *iph,
+			unsigned int proto_off,
+			int inverse);
+
+	int (*snat_handler)(struct sk_buff **pskb,
+			    struct ip_vs_protocol *pp, struct ip_vs_conn *cp);
+
+	int (*dnat_handler)(struct sk_buff **pskb,
+			    struct ip_vs_protocol *pp, struct ip_vs_conn *cp);
+
+	int (*csum_check)(struct sk_buff *skb, struct ip_vs_protocol *pp);
+
+	const char *(*state_name)(int state);
+
+	int (*state_transition)(struct ip_vs_conn *cp, int direction,
+				const struct sk_buff *skb,
+				struct ip_vs_protocol *pp);
+
+	int (*register_app)(struct ip_vs_app *inc);
+
+	void (*unregister_app)(struct ip_vs_app *inc);
+
+	int (*app_conn_bind)(struct ip_vs_conn *cp);
+
+	void (*debug_packet)(struct ip_vs_protocol *pp,
+			     const struct sk_buff *skb,
+			     int offset,
+			     const char *msg);
+
+	void (*timeout_change)(struct ip_vs_protocol *pp, int flags);
+
+	int (*set_state_timeout)(struct ip_vs_protocol *pp, char *sname, int to);
+};
+
+extern struct ip_vs_protocol * ip_vs_proto_get(unsigned short proto);
+
+/*
+ *	IP_VS structure allocated for each dynamically scheduled connection
+ */
+struct ip_vs_conn {
+	struct list_head        c_list;         /* hashed list heads */
+
+	/* Protocol, addresses and port numbers */
+	__u32                   caddr;          /* client address */
+	__u32                   vaddr;          /* virtual address */
+	__u32                   daddr;          /* destination address */
+	__u16                   cport;
+	__u16                   vport;
+	__u16                   dport;
+	__u16                   protocol;       /* Which protocol (TCP/UDP) */
+
+	/* counter and timer */
+	atomic_t		refcnt;		/* reference count */
+	struct timer_list	timer;		/* Expiration timer */
+	volatile unsigned long	timeout;	/* timeout */
+
+	/* Flags and state transition */
+	spinlock_t              lock;           /* lock for state transition */
+	volatile __u16          flags;          /* status flags */
+	volatile __u16          state;          /* state info */
+
+	/* Control members */
+	struct ip_vs_conn       *control;       /* Master control connection */
+	atomic_t                n_control;      /* Number of controlled ones */
+	struct ip_vs_dest       *dest;          /* real server */
+	atomic_t                in_pkts;        /* incoming packet counter */
+
+	/* packet transmitter for different forwarding methods.  If it
+	   mangles the packet, it must return NF_DROP or better NF_STOLEN,
+	   otherwise this must be changed to a sk_buff **.
+	 */
+	int (*packet_xmit)(struct sk_buff *skb, struct ip_vs_conn *cp,
+			   struct ip_vs_protocol *pp);
+
+	/* Note: we can group the following members into a structure,
+	   in order to save more space, and the following members are
+	   only used in VS/NAT anyway */
+	struct ip_vs_app        *app;           /* bound ip_vs_app object */
+	void                    *app_data;      /* Application private data */
+	struct ip_vs_seq        in_seq;         /* incoming seq. struct */
+	struct ip_vs_seq        out_seq;        /* outgoing seq. struct */
+};
+
+
+/*
+ *	The information about the virtual service offered to the net
+ *	and the forwarding entries
+ */
+struct ip_vs_service {
+	struct list_head	s_list;   /* for normal service table */
+	struct list_head	f_list;   /* for fwmark-based service table */
+	atomic_t		refcnt;   /* reference counter */
+	atomic_t		usecnt;   /* use counter */
+
+	__u16			protocol; /* which protocol (TCP/UDP) */
+	__u32			addr;	  /* IP address for virtual service */
+	__u16			port;	  /* port number for the service */
+	__u32                   fwmark;   /* firewall mark of the service */
+	unsigned		flags;	  /* service status flags */
+	unsigned		timeout;  /* persistent timeout in ticks */
+	__u32			netmask;  /* grouping granularity */
+
+	struct list_head	destinations;  /* real server d-linked list */
+	__u32			num_dests;     /* number of servers */
+	struct ip_vs_stats      stats;         /* statistics for the service */
+	struct ip_vs_app	*inc;	  /* bind conns to this app inc */
+
+	/* for scheduling */
+	struct ip_vs_scheduler	*scheduler;    /* bound scheduler object */
+	rwlock_t		sched_lock;    /* lock sched_data */
+	void			*sched_data;   /* scheduler application data */
+};
+
+
+/*
+ *	The real server destination forwarding entry
+ *	with ip address, port number, and so on.
+ */
+struct ip_vs_dest {
+	struct list_head	n_list;   /* for the dests in the service */
+	struct list_head	d_list;   /* for table with all the dests */
+
+	__u32			addr;		/* IP address of the server */
+	__u16			port;		/* port number of the server */
+	volatile unsigned	flags;		/* dest status flags */
+	atomic_t		conn_flags;	/* flags to copy to conn */
+	atomic_t		weight;		/* server weight */
+
+	atomic_t		refcnt;		/* reference counter */
+	struct ip_vs_stats      stats;          /* statistics */
+
+	/* connection counters and thresholds */
+	atomic_t		activeconns;	/* active connections */
+	atomic_t		inactconns;	/* inactive connections */
+	atomic_t		persistconns;	/* persistent connections */
+	__u32			u_threshold;	/* upper threshold */
+	__u32			l_threshold;	/* lower threshold */
+
+	/* for destination cache */
+	spinlock_t		dst_lock;	/* lock of dst_cache */
+	struct dst_entry	*dst_cache;	/* destination cache entry */
+	u32			dst_rtos;	/* RT_TOS(tos) for dst */
+
+	/* for virtual service */
+	struct ip_vs_service	*svc;		/* service it belongs to */
+	__u16			protocol;	/* which protocol (TCP/UDP) */
+	__u32			vaddr;		/* virtual IP address */
+	__u16			vport;		/* virtual port number */
+	__u32			vfwmark;	/* firewall mark of service */
+};
+
+
+/*
+ *	The scheduler object
+ */
+struct ip_vs_scheduler {
+	struct list_head	n_list;		/* d-linked list head */
+	char			*name;		/* scheduler name */
+	atomic_t		refcnt;		/* reference counter */
+	struct module		*module;	/* THIS_MODULE/NULL */
+
+	/* scheduler initializing service */
+	int (*init_service)(struct ip_vs_service *svc);
+	/* scheduling service finish */
+	int (*done_service)(struct ip_vs_service *svc);
+	/* scheduler updating service */
+	int (*update_service)(struct ip_vs_service *svc);
+
+	/* selecting a server from the given service */
+	struct ip_vs_dest* (*schedule)(struct ip_vs_service *svc,
+				       const struct sk_buff *skb);
+};
+
+
+/*
+ *	The application module object (a.k.a. app incarnation)
+ */
+struct ip_vs_app
+{
+	struct list_head	a_list;		/* member in app list */
+	int			type;		/* IP_VS_APP_TYPE_xxx */
+	char			*name;		/* application module name */
+	__u16			protocol;
+	struct module		*module;	/* THIS_MODULE/NULL */
+	struct list_head	incs_list;	/* list of incarnations */
+
+	/* members for application incarnations */
+	struct list_head	p_list;		/* member in proto app list */
+	struct ip_vs_app	*app;		/* its real application */
+	__u16			port;		/* port number in net order */
+	atomic_t		usecnt;		/* usage counter */
+
+	/* output hook: return false if can't linearize. diff set for TCP.  */
+	int (*pkt_out)(struct ip_vs_app *, struct ip_vs_conn *,
+		       struct sk_buff **, int *diff);
+
+	/* input hook: return false if can't linearize. diff set for TCP. */
+	int (*pkt_in)(struct ip_vs_app *, struct ip_vs_conn *,
+		      struct sk_buff **, int *diff);
+
+	/* ip_vs_app initializer */
+	int (*init_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+	/* ip_vs_app finish */
+	int (*done_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+
+	/* not used now */
+	int (*bind_conn)(struct ip_vs_app *, struct ip_vs_conn *,
+			 struct ip_vs_protocol *);
+
+	void (*unbind_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+	int *			timeout_table;
+	int *			timeouts;
+	int			timeouts_size;
+
+	int (*conn_schedule)(struct sk_buff *skb, struct ip_vs_app *app,
+			     int *verdict, struct ip_vs_conn **cpp);
+
+	struct ip_vs_conn *
+	(*conn_in_get)(const struct sk_buff *skb, struct ip_vs_app *app,
+		       const struct iphdr *iph, unsigned int proto_off,
+		       int inverse);
+
+	struct ip_vs_conn *
+	(*conn_out_get)(const struct sk_buff *skb, struct ip_vs_app *app,
+			const struct iphdr *iph, unsigned int proto_off,
+			int inverse);
+
+	int (*state_transition)(struct ip_vs_conn *cp, int direction,
+				const struct sk_buff *skb,
+				struct ip_vs_app *app);
+
+	void (*timeout_change)(struct ip_vs_app *app, int flags);
+};
+
+
+/*
+ *      IPVS core functions
+ *      (from ip_vs_core.c)
+ */
+extern const char *ip_vs_proto_name(unsigned proto);
+extern void ip_vs_init_hash_table(struct list_head *table, int rows);
+#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table(t, sizeof(t)/sizeof(t[0]))
+
+#define IP_VS_APP_TYPE_UNSPEC	0
+#define IP_VS_APP_TYPE_FTP	1
+
+/*
+ *     ip_vs_conn handling functions
+ *     (from ip_vs_conn.c)
+ */
+
+/*
+ *     IPVS connection entry hash table
+ */
+#ifndef CONFIG_IP_VS_TAB_BITS
+#define CONFIG_IP_VS_TAB_BITS   12
+#endif
+/* make sure that IP_VS_CONN_TAB_BITS is located in [8, 20] */
+#if CONFIG_IP_VS_TAB_BITS < 8
+#define IP_VS_CONN_TAB_BITS	8
+#endif
+#if CONFIG_IP_VS_TAB_BITS > 20
+#define IP_VS_CONN_TAB_BITS	20
+#endif
+#if 8 <= CONFIG_IP_VS_TAB_BITS && CONFIG_IP_VS_TAB_BITS <= 20
+#define IP_VS_CONN_TAB_BITS	CONFIG_IP_VS_TAB_BITS
+#endif
+#define IP_VS_CONN_TAB_SIZE     (1 << IP_VS_CONN_TAB_BITS)
+#define IP_VS_CONN_TAB_MASK     (IP_VS_CONN_TAB_SIZE - 1)
+
+enum {
+	IP_VS_DIR_INPUT = 0,
+	IP_VS_DIR_OUTPUT,
+	IP_VS_DIR_INPUT_ONLY,
+	IP_VS_DIR_LAST,
+};
+
+extern struct ip_vs_conn *ip_vs_conn_in_get
+(int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port);
+extern struct ip_vs_conn *ip_vs_conn_out_get
+(int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port);
+
+/* put back the conn without restarting its timer */
+static inline void __ip_vs_conn_put(struct ip_vs_conn *cp)
+{
+	atomic_dec(&cp->refcnt);
+}
+extern void ip_vs_conn_put(struct ip_vs_conn *cp);
+extern void ip_vs_conn_fill_cport(struct ip_vs_conn *cp, __u16 cport);
+
+extern struct ip_vs_conn *
+ip_vs_conn_new(int proto, __u32 caddr, __u16 cport, __u32 vaddr, __u16 vport,
+	       __u32 daddr, __u16 dport, unsigned flags,
+	       struct ip_vs_dest *dest);
+extern void ip_vs_conn_expire_now(struct ip_vs_conn *cp);
+
+extern const char * ip_vs_state_name(__u16 proto, int state);
+
+extern void ip_vs_tcp_conn_listen(struct ip_vs_conn *cp);
+extern int ip_vs_check_template(struct ip_vs_conn *ct);
+extern void ip_vs_secure_tcp_set(int on);
+extern void ip_vs_random_dropentry(void);
+extern int ip_vs_conn_init(void);
+extern void ip_vs_conn_cleanup(void);
+
+static inline void ip_vs_control_del(struct ip_vs_conn *cp)
+{
+	struct ip_vs_conn *ctl_cp = cp->control;
+	if (!ctl_cp) {
+		IP_VS_ERR("request control DEL for uncontrolled: "
+			  "%d.%d.%d.%d:%d to %d.%d.%d.%d:%d\n",
+			  NIPQUAD(cp->caddr),ntohs(cp->cport),
+			  NIPQUAD(cp->vaddr),ntohs(cp->vport));
+		return;
+	}
+
+	IP_VS_DBG(7, "DELeting control for: "
+		  "cp.dst=%d.%d.%d.%d:%d ctl_cp.dst=%d.%d.%d.%d:%d\n",
+		  NIPQUAD(cp->caddr),ntohs(cp->cport),
+		  NIPQUAD(ctl_cp->caddr),ntohs(ctl_cp->cport));
+
+	cp->control = NULL;
+	if (atomic_read(&ctl_cp->n_control) == 0) {
+		IP_VS_ERR("BUG control DEL with n=0 : "
+			  "%d.%d.%d.%d:%d to %d.%d.%d.%d:%d\n",
+			  NIPQUAD(cp->caddr),ntohs(cp->cport),
+			  NIPQUAD(cp->vaddr),ntohs(cp->vport));
+		return;
+	}
+	atomic_dec(&ctl_cp->n_control);
+}
+
+static inline void
+ip_vs_control_add(struct ip_vs_conn *cp, struct ip_vs_conn *ctl_cp)
+{
+	if (cp->control) {
+		IP_VS_ERR("request control ADD for already controlled: "
+			  "%d.%d.%d.%d:%d to %d.%d.%d.%d:%d\n",
+			  NIPQUAD(cp->caddr),ntohs(cp->cport),
+			  NIPQUAD(cp->vaddr),ntohs(cp->vport));
+		ip_vs_control_del(cp);
+	}
+
+	IP_VS_DBG(7, "ADDing control for: "
+		  "cp.dst=%d.%d.%d.%d:%d ctl_cp.dst=%d.%d.%d.%d:%d\n",
+		  NIPQUAD(cp->caddr),ntohs(cp->cport),
+		  NIPQUAD(ctl_cp->caddr),ntohs(ctl_cp->cport));
+
+	cp->control = ctl_cp;
+	atomic_inc(&ctl_cp->n_control);
+}
+
+
+/*
+ *      IPVS application functions
+ *      (from ip_vs_app.c)
+ */
+#define IP_VS_APP_MAX_PORTS  8
+extern int register_ip_vs_app(struct ip_vs_app *app);
+extern void unregister_ip_vs_app(struct ip_vs_app *app);
+extern int ip_vs_bind_app(struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern void ip_vs_unbind_app(struct ip_vs_conn *cp);
+extern int
+register_ip_vs_app_inc(struct ip_vs_app *app, __u16 proto, __u16 port);
+extern int ip_vs_app_inc_get(struct ip_vs_app *inc);
+extern void ip_vs_app_inc_put(struct ip_vs_app *inc);
+
+extern int ip_vs_app_pkt_out(struct ip_vs_conn *, struct sk_buff **pskb);
+extern int ip_vs_app_pkt_in(struct ip_vs_conn *, struct sk_buff **pskb);
+extern int ip_vs_skb_replace(struct sk_buff *skb, int pri,
+			     char *o_buf, int o_len, char *n_buf, int n_len);
+extern int ip_vs_app_init(void);
+extern void ip_vs_app_cleanup(void);
+
+
+/*
+ *	IPVS protocol functions (from ip_vs_proto.c)
+ */
+extern int ip_vs_protocol_init(void);
+extern void ip_vs_protocol_cleanup(void);
+extern void ip_vs_protocol_timeout_change(int flags);
+extern int *ip_vs_create_timeout_table(int *table, int size);
+extern int
+ip_vs_set_state_timeout(int *table, int num, char **names, char *name, int to);
+extern void
+ip_vs_tcpudp_debug_packet(struct ip_vs_protocol *pp, const struct sk_buff *skb,
+			  int offset, const char *msg);
+
+extern struct ip_vs_protocol ip_vs_protocol_tcp;
+extern struct ip_vs_protocol ip_vs_protocol_udp;
+extern struct ip_vs_protocol ip_vs_protocol_icmp;
+extern struct ip_vs_protocol ip_vs_protocol_esp;
+extern struct ip_vs_protocol ip_vs_protocol_ah;
+
+
+/*
+ *      Registering/unregistering scheduler functions
+ *      (from ip_vs_sched.c)
+ */
+extern int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler);
+extern int unregister_ip_vs_scheduler(struct ip_vs_scheduler *scheduler);
+extern int ip_vs_bind_scheduler(struct ip_vs_service *svc,
+				struct ip_vs_scheduler *scheduler);
+extern int ip_vs_unbind_scheduler(struct ip_vs_service *svc);
+extern struct ip_vs_scheduler *ip_vs_scheduler_get(const char *sched_name);
+extern void ip_vs_scheduler_put(struct ip_vs_scheduler *scheduler);
+extern struct ip_vs_conn *
+ip_vs_schedule(struct ip_vs_service *svc, const struct sk_buff *skb);
+extern int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
+			struct ip_vs_protocol *pp);
+
+
+/*
+ *      IPVS control data and functions (from ip_vs_ctl.c)
+ */
+extern int sysctl_ip_vs_cache_bypass;
+extern int sysctl_ip_vs_expire_nodest_conn;
+extern int sysctl_ip_vs_expire_quiescent_template;
+extern int sysctl_ip_vs_sync_threshold[2];
+extern int sysctl_ip_vs_nat_icmp_send;
+extern struct ip_vs_stats ip_vs_stats;
+
+extern struct ip_vs_service *
+ip_vs_service_get(__u32 fwmark, __u16 protocol, __u32 vaddr, __u16 vport);
+
+static inline void ip_vs_service_put(struct ip_vs_service *svc)
+{
+	atomic_dec(&svc->usecnt);
+}
+
+extern struct ip_vs_dest *
+ip_vs_lookup_real_service(__u16 protocol, __u32 daddr, __u16 dport);
+extern int ip_vs_use_count_inc(void);
+extern void ip_vs_use_count_dec(void);
+extern int ip_vs_control_init(void);
+extern void ip_vs_control_cleanup(void);
+
+
+/*
+ *      IPVS sync daemon data and function prototypes
+ *      (from ip_vs_sync.c)
+ */
+extern volatile int ip_vs_sync_state;
+extern volatile int ip_vs_master_syncid;
+extern volatile int ip_vs_backup_syncid;
+extern char ip_vs_master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+extern char ip_vs_backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+extern int start_sync_thread(int state, char *mcast_ifn, __u8 syncid);
+extern int stop_sync_thread(int state);
+extern void ip_vs_sync_conn(struct ip_vs_conn *cp);
+
+
+/*
+ *      IPVS rate estimator prototypes (from ip_vs_est.c)
+ */
+extern int ip_vs_new_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_kill_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_zero_estimator(struct ip_vs_stats *stats);
+
+/*
+ *	Various IPVS packet transmitters (from ip_vs_xmit.c)
+ */
+extern int ip_vs_null_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_bypass_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_nat_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_tunnel_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_dr_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_icmp_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, int offset);
+extern void ip_vs_dst_reset(struct ip_vs_dest *dest);
+
+
+/*
+ *	This is a simple mechanism to ignore packets when
+ *	we are loaded. Just set ip_vs_drop_rate to 'n' and
+ *	we start to drop 1/rate of the packets
+ */
+extern int ip_vs_drop_rate;
+extern int ip_vs_drop_counter;
+
+static __inline__ int ip_vs_todrop(void)
+{
+	if (!ip_vs_drop_rate) return 0;
+	if (--ip_vs_drop_counter > 0) return 0;
+	ip_vs_drop_counter = ip_vs_drop_rate;
+	return 1;
+}
+
+/*
+ *      ip_vs_fwd_tag returns the forwarding tag of the connection
+ */
+#define IP_VS_FWD_METHOD(cp)  (cp->flags & IP_VS_CONN_F_FWD_MASK)
+
+extern __inline__ char ip_vs_fwd_tag(struct ip_vs_conn *cp)
+{
+	char fwd;
+
+	switch (IP_VS_FWD_METHOD(cp)) {
+	case IP_VS_CONN_F_MASQ:
+		fwd = 'M'; break;
+	case IP_VS_CONN_F_LOCALNODE:
+		fwd = 'L'; break;
+	case IP_VS_CONN_F_TUNNEL:
+		fwd = 'T'; break;
+	case IP_VS_CONN_F_DROUTE:
+		fwd = 'R'; break;
+	case IP_VS_CONN_F_BYPASS:
+		fwd = 'B'; break;
+	default:
+		fwd = '?'; break;
+	}
+	return fwd;
+}
+
+extern int ip_vs_make_skb_writable(struct sk_buff **pskb, int len);
+extern void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp,
+		struct ip_vs_conn *cp, int dir);
+
+extern u16 ip_vs_checksum_complete(struct sk_buff *skb, int offset);
+
+static inline u16 ip_vs_check_diff(u32 old, u32 new, u16 oldsum)
+{
+	u32 diff[2] = { old, new };
+
+	return csum_fold(csum_partial((char *) diff, sizeof(diff),
+				      oldsum ^ 0xFFFF));
+}
+
+#endif /* __KERNEL__ */
+
+#endif	/* _IP_VS_H */
diff --git a/include/net/ipcomp.h b/include/net/ipcomp.h
new file mode 100644
index 000000000000..e651a57ecdd5
--- /dev/null
+++ b/include/net/ipcomp.h
@@ -0,0 +1,11 @@
+#ifndef _NET_IPCOMP_H
+#define _NET_IPCOMP_H
+
+#define IPCOMP_SCRATCH_SIZE     65400
+
+struct ipcomp_data {
+	u16 threshold;
+	struct crypto_tfm **tfms;
+};
+
+#endif
diff --git a/include/net/ipconfig.h b/include/net/ipconfig.h
new file mode 100644
index 000000000000..2a1fe996fbc6
--- /dev/null
+++ b/include/net/ipconfig.h
@@ -0,0 +1,27 @@
+/*
+ *  $Id: ipconfig.h,v 1.4 2001/04/30 04:51:46 davem Exp $
+ *
+ *  Copyright (C) 1997 Martin Mares
+ *
+ *  Automatic IP Layer Configuration
+ */
+
+/* The following are initdata: */
+
+extern int ic_proto_enabled;	/* Protocols enabled (see IC_xxx) */
+extern int ic_set_manually;	/* IPconfig parameters set manually */
+
+extern u32 ic_myaddr;		/* My IP address */
+extern u32 ic_gateway;		/* Gateway IP address */
+
+extern u32 ic_servaddr;		/* Boot server IP address */
+
+extern u32 root_server_addr;	/* Address of NFS server */
+extern u8 root_server_path[];	/* Path to mount as root */
+
+
+/* bits in ic_proto_{enabled,used} */
+#define IC_PROTO	0xFF	/* Protocols mask: */
+#define IC_BOOTP	0x01	/*   BOOTP (or DHCP, see below) */
+#define IC_RARP		0x02	/*   RARP */
+#define IC_USE_DHCP    0x100	/* If on, use DHCP instead of BOOTP */
diff --git a/include/net/ipip.h b/include/net/ipip.h
new file mode 100644
index 000000000000..f490c3cbe377
--- /dev/null
+++ b/include/net/ipip.h
@@ -0,0 +1,51 @@
+#ifndef __NET_IPIP_H
+#define __NET_IPIP_H 1
+
+#include <linux/if_tunnel.h>
+
+/* Keep error state on tunnel for 30 sec */
+#define IPTUNNEL_ERR_TIMEO	(30*HZ)
+
+struct ip_tunnel
+{
+	struct ip_tunnel	*next;
+	struct net_device	*dev;
+	struct net_device_stats	stat;
+
+	int			recursion;	/* Depth of hard_start_xmit recursion */
+	int			err_count;	/* Number of arrived ICMP errors */
+	unsigned long		err_time;	/* Time when the last ICMP error arrived */
+
+	/* These four fields used only by GRE */
+	__u32			i_seqno;	/* The last seen seqno	*/
+	__u32			o_seqno;	/* The last output seqno */
+	int			hlen;		/* Precalculated GRE header length */
+	int			mlink;
+
+	struct ip_tunnel_parm	parms;
+};
+
+#define IPTUNNEL_XMIT() do {						\
+	int err;							\
+	int pkt_len = skb->len;						\
+									\
+	skb->ip_summed = CHECKSUM_NONE;					\
+	iph->tot_len = htons(skb->len);					\
+	ip_select_ident(iph, &rt->u.dst, NULL);				\
+	ip_send_check(iph);						\
+									\
+	err = NF_HOOK(PF_INET, NF_IP_LOCAL_OUT, skb, NULL, rt->u.dst.dev, dst_output);\
+	if (err == NET_XMIT_SUCCESS || err == NET_XMIT_CN) {		\
+		stats->tx_bytes += pkt_len;				\
+		stats->tx_packets++;					\
+	} else {							\
+		stats->tx_errors++;					\
+		stats->tx_aborted_errors++;				\
+	}								\
+} while (0)
+
+
+extern int	sit_init(void);
+extern void	sit_cleanup(void);
+
+#endif
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
new file mode 100644
index 000000000000..87c45cbfbaf6
--- /dev/null
+++ b/include/net/ipv6.h
@@ -0,0 +1,472 @@
+/*
+ *	Linux INET6 implementation
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>
+ *
+ *	$Id: ipv6.h,v 1.1 2002/05/20 15:13:07 jgrimm Exp $
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IPV6_H
+#define _NET_IPV6_H
+
+#include <linux/ipv6.h>
+#include <linux/hardirq.h>
+#include <net/ndisc.h>
+#include <net/flow.h>
+#include <net/snmp.h>
+
+#define SIN6_LEN_RFC2133	24
+
+#define IPV6_MAXPLEN		65535
+
+/*
+ *	NextHeader field of IPv6 header
+ */
+
+#define NEXTHDR_HOP		0	/* Hop-by-hop option header. */
+#define NEXTHDR_TCP		6	/* TCP segment. */
+#define NEXTHDR_UDP		17	/* UDP message. */
+#define NEXTHDR_IPV6		41	/* IPv6 in IPv6 */
+#define NEXTHDR_ROUTING		43	/* Routing header. */
+#define NEXTHDR_FRAGMENT	44	/* Fragmentation/reassembly header. */
+#define NEXTHDR_ESP		50	/* Encapsulating security payload. */
+#define NEXTHDR_AUTH		51	/* Authentication header. */
+#define NEXTHDR_ICMP		58	/* ICMP for IPv6. */
+#define NEXTHDR_NONE		59	/* No next header */
+#define NEXTHDR_DEST		60	/* Destination options header. */
+
+#define NEXTHDR_MAX		255
+
+
+
+#define IPV6_DEFAULT_HOPLIMIT   64
+#define IPV6_DEFAULT_MCASTHOPS	1
+
+/*
+ *	Addr type
+ *	
+ *	type	-	unicast | multicast
+ *	scope	-	local	| site	    | global
+ *	v4	-	compat
+ *	v4mapped
+ *	any
+ *	loopback
+ */
+
+#define IPV6_ADDR_ANY		0x0000U
+
+#define IPV6_ADDR_UNICAST      	0x0001U	
+#define IPV6_ADDR_MULTICAST    	0x0002U	
+
+#define IPV6_ADDR_LOOPBACK	0x0010U
+#define IPV6_ADDR_LINKLOCAL	0x0020U
+#define IPV6_ADDR_SITELOCAL	0x0040U
+
+#define IPV6_ADDR_COMPATv4	0x0080U
+
+#define IPV6_ADDR_SCOPE_MASK	0x00f0U
+
+#define IPV6_ADDR_MAPPED	0x1000U
+#define IPV6_ADDR_RESERVED	0x2000U	/* reserved address space */
+
+/*
+ *	Addr scopes
+ */
+#ifdef __KERNEL__
+#define IPV6_ADDR_MC_SCOPE(a)	\
+	((a)->s6_addr[1] & 0x0f)	/* nonstandard */
+#define __IPV6_ADDR_SCOPE_INVALID	-1
+#endif
+#define IPV6_ADDR_SCOPE_NODELOCAL	0x01
+#define IPV6_ADDR_SCOPE_LINKLOCAL	0x02
+#define IPV6_ADDR_SCOPE_SITELOCAL	0x05
+#define IPV6_ADDR_SCOPE_ORGLOCAL	0x08
+#define IPV6_ADDR_SCOPE_GLOBAL		0x0e
+
+/*
+ *	fragmentation header
+ */
+
+struct frag_hdr {
+	unsigned char	nexthdr;
+	unsigned char	reserved;	
+	unsigned short	frag_off;
+	__u32		identification;
+};
+
+#define	IP6_MF	0x0001
+
+#ifdef __KERNEL__
+
+#include <net/sock.h>
+
+/* sysctls */
+extern int sysctl_ipv6_bindv6only;
+extern int sysctl_mld_max_msf;
+
+/* MIBs */
+DECLARE_SNMP_STAT(struct ipstats_mib, ipv6_statistics);
+#define IP6_INC_STATS(field)		SNMP_INC_STATS(ipv6_statistics, field)
+#define IP6_INC_STATS_BH(field)		SNMP_INC_STATS_BH(ipv6_statistics, field)
+#define IP6_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(ipv6_statistics, field)
+DECLARE_SNMP_STAT(struct icmpv6_mib, icmpv6_statistics);
+#define ICMP6_INC_STATS(idev, field)		({			\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS(idev->stats.icmpv6, field); 		\
+	SNMP_INC_STATS(icmpv6_statistics, field);			\
+})
+#define ICMP6_INC_STATS_BH(idev, field)		({			\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS_BH((_idev)->stats.icmpv6, field);	\
+	SNMP_INC_STATS_BH(icmpv6_statistics, field);			\
+})
+#define ICMP6_INC_STATS_USER(idev, field) 	({			\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS_USER(_idev->stats.icmpv6, field);	\
+	SNMP_INC_STATS_USER(icmpv6_statistics, field);			\
+})
+#define ICMP6_INC_STATS_OFFSET_BH(idev, field, offset)	({			\
+	struct inet6_dev *_idev = idev;						\
+	__typeof__(offset) _offset = (offset);					\
+	if (likely(_idev != NULL))						\
+		SNMP_INC_STATS_OFFSET_BH(_idev->stats.icmpv6, field, _offset);	\
+	SNMP_INC_STATS_OFFSET_BH(icmpv6_statistics, field, _offset);    	\
+})
+DECLARE_SNMP_STAT(struct udp_mib, udp_stats_in6);
+#define UDP6_INC_STATS(field)		SNMP_INC_STATS(udp_stats_in6, field)
+#define UDP6_INC_STATS_BH(field)	SNMP_INC_STATS_BH(udp_stats_in6, field)
+#define UDP6_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(udp_stats_in6, field)
+extern atomic_t			inet6_sock_nr;
+
+int snmp6_register_dev(struct inet6_dev *idev);
+int snmp6_unregister_dev(struct inet6_dev *idev);
+int snmp6_alloc_dev(struct inet6_dev *idev);
+int snmp6_free_dev(struct inet6_dev *idev);
+int snmp6_mib_init(void *ptr[2], size_t mibsize, size_t mibalign);
+void snmp6_mib_free(void *ptr[2]);
+
+struct ip6_ra_chain
+{
+	struct ip6_ra_chain	*next;
+	struct sock		*sk;
+	int			sel;
+	void			(*destructor)(struct sock *);
+};
+
+extern struct ip6_ra_chain	*ip6_ra_chain;
+extern rwlock_t ip6_ra_lock;
+
+/*
+   This structure is prepared by protocol, when parsing
+   ancillary data and passed to IPv6.
+ */
+
+struct ipv6_txoptions
+{
+	/* Length of this structure */
+	int			tot_len;
+
+	/* length of extension headers   */
+
+	__u16			opt_flen;	/* after fragment hdr */
+	__u16			opt_nflen;	/* before fragment hdr */
+
+	struct ipv6_opt_hdr	*hopopt;
+	struct ipv6_opt_hdr	*dst0opt;
+	struct ipv6_rt_hdr	*srcrt;	/* Routing Header */
+	struct ipv6_opt_hdr	*auth;
+	struct ipv6_opt_hdr	*dst1opt;
+
+	/* Option buffer, as read by IPV6_PKTOPTIONS, starts here. */
+};
+
+struct ip6_flowlabel
+{
+	struct ip6_flowlabel	*next;
+	u32			label;
+	struct in6_addr		dst;
+	struct ipv6_txoptions	*opt;
+	atomic_t		users;
+	unsigned long		linger;
+	u8			share;
+	u32			owner;
+	unsigned long		lastuse;
+	unsigned long		expires;
+};
+
+#define IPV6_FLOWINFO_MASK	__constant_htonl(0x0FFFFFFF)
+#define IPV6_FLOWLABEL_MASK	__constant_htonl(0x000FFFFF)
+
+struct ipv6_fl_socklist
+{
+	struct ipv6_fl_socklist	*next;
+	struct ip6_flowlabel	*fl;
+};
+
+extern struct ip6_flowlabel	*fl6_sock_lookup(struct sock *sk, u32 label);
+extern struct ipv6_txoptions	*fl6_merge_options(struct ipv6_txoptions * opt_space,
+						   struct ip6_flowlabel * fl,
+						   struct ipv6_txoptions * fopt);
+extern void			fl6_free_socklist(struct sock *sk);
+extern int			ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen);
+extern void			ip6_flowlabel_init(void);
+extern void			ip6_flowlabel_cleanup(void);
+
+static inline void fl6_sock_release(struct ip6_flowlabel *fl)
+{
+	if (fl)
+		atomic_dec(&fl->users);
+}
+
+extern int 			ip6_ra_control(struct sock *sk, int sel,
+					       void (*destructor)(struct sock *));
+
+
+extern int			ipv6_parse_hopopts(struct sk_buff *skb, int);
+
+extern struct ipv6_txoptions *  ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt);
+
+extern int ip6_frag_nqueues;
+extern atomic_t ip6_frag_mem;
+
+#define IPV6_FRAG_TIMEOUT	(60*HZ)		/* 60 seconds */
+
+/*
+ *	Function prototype for build_xmit
+ */
+
+typedef int		(*inet_getfrag_t) (const void *data,
+					   struct in6_addr *addr,
+					   char *,
+					   unsigned int, unsigned int);
+
+
+extern int		ipv6_addr_type(const struct in6_addr *addr);
+
+static inline int ipv6_addr_scope(const struct in6_addr *addr)
+{
+	return ipv6_addr_type(addr) & IPV6_ADDR_SCOPE_MASK;
+}
+
+static inline int ipv6_addr_cmp(const struct in6_addr *a1, const struct in6_addr *a2)
+{
+	return memcmp((const void *) a1, (const void *) a2, sizeof(struct in6_addr));
+}
+
+static inline void ipv6_addr_copy(struct in6_addr *a1, const struct in6_addr *a2)
+{
+	memcpy((void *) a1, (const void *) a2, sizeof(struct in6_addr));
+}
+
+static inline void ipv6_addr_prefix(struct in6_addr *pfx, 
+				    const struct in6_addr *addr,
+				    int plen)
+{
+	/* caller must guarantee 0 <= plen <= 128 */
+	int o = plen >> 3,
+	    b = plen & 0x7;
+
+	memcpy(pfx->s6_addr, addr, o);
+	if (b != 0) {
+		pfx->s6_addr[o] = addr->s6_addr[o] & (0xff00 >> b);
+		o++;
+	}
+	if (o < 16)
+		memset(pfx->s6_addr + o, 0, 16 - o);
+}
+
+#ifndef __HAVE_ARCH_ADDR_SET
+static inline void ipv6_addr_set(struct in6_addr *addr, 
+				     __u32 w1, __u32 w2,
+				     __u32 w3, __u32 w4)
+{
+	addr->s6_addr32[0] = w1;
+	addr->s6_addr32[1] = w2;
+	addr->s6_addr32[2] = w3;
+	addr->s6_addr32[3] = w4;
+}
+#endif
+
+static inline int ipv6_addr_equal(const struct in6_addr *a1,
+				  const struct in6_addr *a2)
+{
+	return (a1->s6_addr32[0] == a2->s6_addr32[0] &&
+		a1->s6_addr32[1] == a2->s6_addr32[1] &&
+		a1->s6_addr32[2] == a2->s6_addr32[2] &&
+		a1->s6_addr32[3] == a2->s6_addr32[3]);
+}
+
+static inline int __ipv6_prefix_equal(const u32 *a1, const u32 *a2,
+				      unsigned int prefixlen)
+{
+	unsigned pdw, pbi;
+
+	/* check complete u32 in prefix */
+	pdw = prefixlen >> 5;
+	if (pdw && memcmp(a1, a2, pdw << 2))
+		return 0;
+
+	/* check incomplete u32 in prefix */
+	pbi = prefixlen & 0x1f;
+	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
+		return 0;
+
+	return 1;
+}
+
+static inline int ipv6_prefix_equal(const struct in6_addr *a1,
+				    const struct in6_addr *a2,
+				    unsigned int prefixlen)
+{
+	return __ipv6_prefix_equal(a1->s6_addr32, a2->s6_addr32,
+				   prefixlen);
+}
+
+static inline int ipv6_addr_any(const struct in6_addr *a)
+{
+	return ((a->s6_addr32[0] | a->s6_addr32[1] | 
+		 a->s6_addr32[2] | a->s6_addr32[3] ) == 0); 
+}
+
+/*
+ *	Prototypes exported by ipv6
+ */
+
+/*
+ *	rcv function (called from netdevice level)
+ */
+
+extern int			ipv6_rcv(struct sk_buff *skb, 
+					 struct net_device *dev, 
+					 struct packet_type *pt);
+
+/*
+ *	upper-layer output functions
+ */
+extern int			ip6_xmit(struct sock *sk,
+					 struct sk_buff *skb,
+					 struct flowi *fl,
+					 struct ipv6_txoptions *opt,
+					 int ipfragok);
+
+extern int			ip6_nd_hdr(struct sock *sk,
+					   struct sk_buff *skb,
+					   struct net_device *dev,
+					   struct in6_addr *saddr,
+					   struct in6_addr *daddr,
+					   int proto, int len);
+
+extern int			ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr);
+
+extern int			ip6_append_data(struct sock *sk,
+						int getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb),
+		    				void *from,
+						int length,
+						int transhdrlen,
+		      				int hlimit,
+						struct ipv6_txoptions *opt,
+						struct flowi *fl,
+						struct rt6_info *rt,
+						unsigned int flags);
+
+extern int			ip6_push_pending_frames(struct sock *sk);
+
+extern void			ip6_flush_pending_frames(struct sock *sk);
+
+extern int			ip6_dst_lookup(struct sock *sk,
+					       struct dst_entry **dst,
+					       struct flowi *fl);
+
+/*
+ *	skb processing functions
+ */
+
+extern int			ip6_output(struct sk_buff *skb);
+extern int			ip6_forward(struct sk_buff *skb);
+extern int			ip6_input(struct sk_buff *skb);
+extern int			ip6_mc_input(struct sk_buff *skb);
+
+/*
+ *	Extension header (options) processing
+ */
+
+extern u8 *			ipv6_build_nfrag_opts(struct sk_buff *skb,
+						      u8 *prev_hdr,
+						      struct ipv6_txoptions *opt,
+						      struct in6_addr *daddr,
+						      u32 jumbolen);
+extern u8 *			ipv6_build_frag_opts(struct sk_buff *skb,
+						     u8 *prev_hdr,
+						     struct ipv6_txoptions *opt);
+extern void 			ipv6_push_nfrag_opts(struct sk_buff *skb,
+						     struct ipv6_txoptions *opt,
+						     u8 *proto,
+						     struct in6_addr **daddr_p);
+extern void			ipv6_push_frag_opts(struct sk_buff *skb,
+						    struct ipv6_txoptions *opt,
+						    u8 *proto);
+
+extern int			ipv6_skip_exthdr(const struct sk_buff *, int start,
+					         u8 *nexthdrp, int len);
+
+extern int 			ipv6_ext_hdr(u8 nexthdr);
+
+extern struct ipv6_txoptions *	ipv6_invert_rthdr(struct sock *sk,
+						  struct ipv6_rt_hdr *hdr);
+
+
+/*
+ *	socket options (ipv6_sockglue.c)
+ */
+
+extern int			ipv6_setsockopt(struct sock *sk, int level, 
+						int optname,
+						char __user *optval, 
+						int optlen);
+extern int			ipv6_getsockopt(struct sock *sk, int level, 
+						int optname,
+						char __user *optval, 
+						int __user *optlen);
+
+extern void			ipv6_packet_init(void);
+
+extern void			ipv6_packet_cleanup(void);
+
+extern int			ip6_datagram_connect(struct sock *sk, 
+						     struct sockaddr *addr, int addr_len);
+
+extern int 			ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern void			ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, u16 port,
+						u32 info, u8 *payload);
+extern void			ipv6_local_error(struct sock *sk, int err, struct flowi *fl, u32 info);
+
+extern int inet6_release(struct socket *sock);
+extern int inet6_bind(struct socket *sock, struct sockaddr *uaddr, 
+		      int addr_len);
+extern int inet6_getname(struct socket *sock, struct sockaddr *uaddr,
+			 int *uaddr_len, int peer);
+extern int inet6_ioctl(struct socket *sock, unsigned int cmd, 
+		       unsigned long arg);
+
+/*
+ * reassembly.c
+ */
+extern int sysctl_ip6frag_high_thresh;
+extern int sysctl_ip6frag_low_thresh;
+extern int sysctl_ip6frag_time;
+extern int sysctl_ip6frag_secret_interval;
+
+#endif /* __KERNEL__ */
+#endif /* _NET_IPV6_H */
+
+
+
diff --git a/include/net/ipx.h b/include/net/ipx.h
new file mode 100644
index 000000000000..5c0cf33826c5
--- /dev/null
+++ b/include/net/ipx.h
@@ -0,0 +1,161 @@
+#ifndef _NET_INET_IPX_H_
+#define _NET_INET_IPX_H_
+/*
+ *	The following information is in its entirety obtained from:
+ *
+ *	Novell 'IPX Router Specification' Version 1.10 
+ *		Part No. 107-000029-001
+ *
+ *	Which is available from ftp.novell.com
+ */
+
+#include <linux/netdevice.h>
+#include <net/datalink.h>
+#include <linux/ipx.h>
+#include <linux/list.h>
+
+struct ipx_address {
+	__u32   net;
+	__u8    node[IPX_NODE_LEN]; 
+	__u16   sock;
+};
+
+#define ipx_broadcast_node	"\377\377\377\377\377\377"
+#define ipx_this_node           "\0\0\0\0\0\0"
+
+#define IPX_MAX_PPROP_HOPS 8
+
+struct ipxhdr {
+	__u16			ipx_checksum __attribute__ ((packed));
+#define IPX_NO_CHECKSUM	0xFFFF
+	__u16			ipx_pktsize __attribute__ ((packed));
+	__u8			ipx_tctrl;
+	__u8			ipx_type;
+#define IPX_TYPE_UNKNOWN	0x00
+#define IPX_TYPE_RIP		0x01	/* may also be 0 */
+#define IPX_TYPE_SAP		0x04	/* may also be 0 */
+#define IPX_TYPE_SPX		0x05	/* SPX protocol */
+#define IPX_TYPE_NCP		0x11	/* $lots for docs on this (SPIT) */
+#define IPX_TYPE_PPROP		0x14	/* complicated flood fill brdcast */
+	struct ipx_address	ipx_dest __attribute__ ((packed));
+	struct ipx_address	ipx_source __attribute__ ((packed));
+};
+
+static __inline__ struct ipxhdr *ipx_hdr(struct sk_buff *skb)
+{
+	return (struct ipxhdr *)skb->h.raw;
+}
+
+struct ipx_interface {
+	/* IPX address */
+	__u32			if_netnum;
+	unsigned char		if_node[IPX_NODE_LEN];
+	atomic_t		refcnt;
+
+	/* physical device info */
+	struct net_device	*if_dev;
+	struct datalink_proto	*if_dlink;
+	unsigned short		if_dlink_type;
+
+	/* socket support */
+	unsigned short		if_sknum;
+	struct hlist_head	if_sklist;
+	spinlock_t		if_sklist_lock;
+
+	/* administrative overhead */
+	int			if_ipx_offset;
+	unsigned char		if_internal;
+	unsigned char		if_primary;
+	
+	struct list_head	node; /* node in ipx_interfaces list */
+};
+
+struct ipx_route {
+	__u32			ir_net;
+	struct ipx_interface	*ir_intrfc;
+	unsigned char		ir_routed;
+	unsigned char		ir_router_node[IPX_NODE_LEN];
+	struct list_head	node; /* node in ipx_routes list */
+	atomic_t		refcnt;
+};
+
+#ifdef __KERNEL__
+struct ipx_cb {
+	u8	ipx_tctrl;
+	u32	ipx_dest_net;
+	u32	ipx_source_net;
+	struct {
+		u32 netnum;
+		int index;
+	} last_hop;
+};
+
+#include <net/sock.h>
+
+struct ipx_sock {
+	/* struct sock has to be the first member of ipx_sock */
+	struct sock		sk;
+	struct ipx_address	dest_addr;
+	struct ipx_interface	*intrfc;
+	unsigned short		port;
+#ifdef CONFIG_IPX_INTERN
+	unsigned char		node[IPX_NODE_LEN];
+#endif
+	unsigned short		type;
+	/*
+	 * To handle special ncp connection-handling sockets for mars_nwe,
+ 	 * the connection number must be stored in the socket.
+	 */
+	unsigned short		ipx_ncp_conn;
+};
+
+static inline struct ipx_sock *ipx_sk(struct sock *sk)
+{
+	return (struct ipx_sock *)sk;
+}
+
+#define IPX_SKB_CB(__skb) ((struct ipx_cb *)&((__skb)->cb[0]))
+#endif
+
+#define IPX_MIN_EPHEMERAL_SOCKET	0x4000
+#define IPX_MAX_EPHEMERAL_SOCKET	0x7fff
+
+extern struct list_head ipx_routes;
+extern rwlock_t ipx_routes_lock;
+
+extern struct list_head ipx_interfaces;
+extern struct ipx_interface *ipx_interfaces_head(void);
+extern spinlock_t ipx_interfaces_lock;
+
+extern struct ipx_interface *ipx_primary_net;
+
+extern int ipx_proc_init(void);
+extern void ipx_proc_exit(void);
+
+extern const char *ipx_frame_name(unsigned short);
+extern const char *ipx_device_name(struct ipx_interface *intrfc);
+
+static __inline__ void ipxitf_hold(struct ipx_interface *intrfc)
+{
+	atomic_inc(&intrfc->refcnt);
+}
+
+extern void ipxitf_down(struct ipx_interface *intrfc);
+
+static __inline__ void ipxitf_put(struct ipx_interface *intrfc)
+{
+	if (atomic_dec_and_test(&intrfc->refcnt))
+		ipxitf_down(intrfc);
+}
+
+static __inline__ void ipxrtr_hold(struct ipx_route *rt)
+{
+	        atomic_inc(&rt->refcnt);
+}
+
+static __inline__ void ipxrtr_put(struct ipx_route *rt)
+{
+	        if (atomic_dec_and_test(&rt->refcnt))
+			                kfree(rt);
+}
+#endif /* _NET_INET_IPX_H_ */
diff --git a/include/net/irda/af_irda.h b/include/net/irda/af_irda.h
new file mode 100644
index 000000000000..7a209f61c482
--- /dev/null
+++ b/include/net/irda/af_irda.h
@@ -0,0 +1,87 @@
+/*********************************************************************
+ *                
+ * Filename:      af_irda.h
+ * Version:       1.0
+ * Description:   IrDA sockets declarations
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Dec  9 21:13:12 1997
+ * Modified at:   Fri Jan 28 13:16:32 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef AF_IRDA_H
+#define AF_IRDA_H
+
+#include <linux/irda.h>
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>		/* struct iriap_cb */
+#include <net/irda/irias_object.h>	/* struct ias_value */
+#include <net/irda/irlmp.h>		/* struct lsap_cb */
+#include <net/irda/irttp.h>		/* struct tsap_cb */
+#include <net/irda/discovery.h>		/* struct discovery_t */
+#include <net/sock.h>
+
+/* IrDA Socket */
+struct irda_sock {
+	/* struct sock has to be the first member of irda_sock */
+	struct sock sk;
+	__u32 saddr;          /* my local address */
+	__u32 daddr;          /* peer address */
+
+	struct lsap_cb *lsap; /* LSAP used by Ultra */
+	__u8  pid;            /* Protocol IP (PID) used by Ultra */
+
+	struct tsap_cb *tsap; /* TSAP used by this connection */
+	__u8 dtsap_sel;       /* remote TSAP address */
+	__u8 stsap_sel;       /* local TSAP address */
+	
+	__u32 max_sdu_size_rx;
+	__u32 max_sdu_size_tx;
+	__u32 max_data_size;
+	__u8  max_header_size;
+	struct qos_info qos_tx;
+
+	__u16_host_order mask;           /* Hint bits mask */
+	__u16_host_order hints;          /* Hint bits */
+
+	void *ckey;           /* IrLMP client handle */
+	void *skey;           /* IrLMP service handle */
+
+	struct ias_object *ias_obj;   /* Our service name + lsap in IAS */
+	struct iriap_cb *iriap;	      /* Used to query remote IAS */
+	struct ias_value *ias_result; /* Result of remote IAS query */
+
+	hashbin_t *cachelog;		/* Result of discovery query */
+	__u32 cachedaddr;	/* Result of selective discovery query */
+
+	int nslots;           /* Number of slots to use for discovery */
+
+	int errno;            /* status of the IAS query */
+
+	wait_queue_head_t query_wait;	/* Wait for the answer to a query */
+	struct timer_list watchdog;	/* Timeout for discovery */
+
+	LOCAL_FLOW tx_flow;
+	LOCAL_FLOW rx_flow;
+};
+
+static inline struct irda_sock *irda_sk(struct sock *sk)
+{
+	return (struct irda_sock *)sk;
+}
+
+#endif /* AF_IRDA_H */
diff --git a/include/net/irda/crc.h b/include/net/irda/crc.h
new file mode 100644
index 000000000000..f202296df9bb
--- /dev/null
+++ b/include/net/irda/crc.h
@@ -0,0 +1,29 @@
+/*********************************************************************
+ *                
+ * Filename:      crc.h
+ * Version:       
+ * Description:   CRC routines
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Sun May  2 20:25:23 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ ********************************************************************/
+
+#ifndef IRDA_CRC_H
+#define IRDA_CRC_H
+
+#include <linux/types.h>
+#include <linux/crc-ccitt.h>
+
+#define INIT_FCS  0xffff   /* Initial FCS value */
+#define GOOD_FCS  0xf0b8   /* Good final FCS value */
+
+/* Recompute the FCS with one more character appended. */
+#define irda_fcs(fcs, c) crc_ccitt_byte(fcs, c)
+
+/* Recompute the FCS with len bytes appended. */
+#define irda_calc_crc16(fcs, buf, len) crc_ccitt(fcs, buf, len)
+
+#endif
diff --git a/include/net/irda/discovery.h b/include/net/irda/discovery.h
new file mode 100644
index 000000000000..eb0f9de47294
--- /dev/null
+++ b/include/net/irda/discovery.h
@@ -0,0 +1,100 @@
+/*********************************************************************
+ *                
+ * Filename:      discovery.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Apr  6 16:53:53 1999
+ * Modified at:   Tue Oct  5 10:05:10 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef DISCOVERY_H
+#define DISCOVERY_H
+
+#include <asm/param.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/irlap_event.h>	/* LAP_REASON */
+
+#define DISCOVERY_EXPIRE_TIMEOUT (2*sysctl_discovery_timeout*HZ)
+#define DISCOVERY_DEFAULT_SLOTS  0
+
+/*
+ *  This type is used by the protocols that transmit 16 bits words in 
+ *  little endian format. A little endian machine stores MSB of word in
+ *  byte[1] and LSB in byte[0]. A big endian machine stores MSB in byte[0] 
+ *  and LSB in byte[1].
+ *
+ * This structure is used in the code for things that are endian neutral
+ * but that fit in a word so that we can manipulate them efficiently.
+ * By endian neutral, I mean things that are really an array of bytes,
+ * and always used as such, for example the hint bits. Jean II
+ */
+typedef union {
+	__u16 word;
+	__u8  byte[2];
+} __u16_host_order;
+
+/* Same purpose, different application */
+#define u16ho(array) (* ((__u16 *) array))
+
+/* Types of discovery */
+typedef enum {
+	DISCOVERY_LOG,		/* What's in our discovery log */
+	DISCOVERY_ACTIVE,	/* Doing our own discovery on the medium */
+	DISCOVERY_PASSIVE,	/* Peer doing discovery on the medium */
+	EXPIRY_TIMEOUT,		/* Entry expired due to timeout */
+} DISCOVERY_MODE;
+
+#define NICKNAME_MAX_LEN 21
+
+/* Basic discovery information about a peer */
+typedef struct irda_device_info		discinfo_t;	/* linux/irda.h */
+
+/*
+ * The DISCOVERY structure is used for both discovery requests and responses
+ */
+typedef struct discovery_t {
+	irda_queue_t	q;		/* Must be first! */
+
+	discinfo_t	data;		/* Basic discovery information */
+	int		name_len;	/* Lenght of nickname */
+
+	LAP_REASON	condition;	/* More info about the discovery */
+	int		gen_addr_bit;	/* Need to generate a new device
+					 * address? */
+	int		nslots;		/* Number of slots to use when
+					 * discovering */
+	unsigned long	timestamp;	/* Last time discovered */
+	unsigned long	firststamp;	/* First time discovered */
+} discovery_t;
+
+void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *discovery);
+void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log);
+void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force);
+struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn,
+						__u16 mask, int old_entries);
+
+#endif
diff --git a/include/net/irda/ircomm_core.h b/include/net/irda/ircomm_core.h
new file mode 100644
index 000000000000..69b610acd2df
--- /dev/null
+++ b/include/net/irda/ircomm_core.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_core.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 08:58:43 1999
+ * Modified at:   Mon Dec 13 11:52:29 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_CORE_H
+#define IRCOMM_CORE_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/ircomm_event.h>
+
+#define IRCOMM_MAGIC 0x98347298
+#define IRCOMM_HEADER_SIZE 1
+
+struct ircomm_cb;   /* Forward decl. */
+
+/*
+ * A small call-table, so we don't have to check the service-type whenever
+ * we want to do something
+ */
+typedef struct {
+	int (*data_request)(struct ircomm_cb *, struct sk_buff *, int clen);
+	int (*connect_request)(struct ircomm_cb *, struct sk_buff *, 
+			       struct ircomm_info *);
+	int (*connect_response)(struct ircomm_cb *, struct sk_buff *);
+	int (*disconnect_request)(struct ircomm_cb *, struct sk_buff *, 
+				  struct ircomm_info *);	
+} call_t;
+
+struct ircomm_cb {
+	irda_queue_t queue;
+	magic_t magic;
+
+	notify_t notify;
+	call_t   issue;
+
+	int state;
+	int line;            /* Which TTY line we are using */
+
+	struct tsap_cb *tsap;
+	struct lsap_cb *lsap;
+	
+	__u8 dlsap_sel;      /* Destination LSAP/TSAP selector */
+	__u8 slsap_sel;      /* Source LSAP/TSAP selector */
+
+	__u32 saddr;         /* Source device address (link we are using) */
+	__u32 daddr;         /* Destination device address */
+
+	int max_header_size; /* Header space we must reserve for each frame */
+	int max_data_size;   /* The amount of data we can fill in each frame */
+
+	LOCAL_FLOW flow_status; /* Used by ircomm_lmp */
+	int pkt_count;          /* Number of frames we have sent to IrLAP */
+
+	__u8 service_type;
+};
+
+extern hashbin_t *ircomm;
+
+struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line);
+int ircomm_close(struct ircomm_cb *self);
+
+int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb);
+void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb);
+void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb);
+int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb);
+int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel, 
+			   __u32 saddr, __u32 daddr, struct sk_buff *skb,
+			   __u8 service_type);
+void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+			       struct ircomm_info *info);
+void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb,
+			    struct ircomm_info *info);
+int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata);
+int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata);
+void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+				  struct ircomm_info *info);
+void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow);
+
+#define ircomm_is_connected(self) (self->state == IRCOMM_CONN)
+
+#endif
diff --git a/include/net/irda/ircomm_event.h b/include/net/irda/ircomm_event.h
new file mode 100644
index 000000000000..c290447872d1
--- /dev/null
+++ b/include/net/irda/ircomm_event.h
@@ -0,0 +1,85 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_event.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 23:51:13 1999
+ * Modified at:   Thu Jun 10 08:36:25 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_EVENT_H
+#define IRCOMM_EVENT_H
+
+#include <net/irda/irmod.h>
+
+typedef enum {
+        IRCOMM_IDLE,
+        IRCOMM_WAITI,
+        IRCOMM_WAITR,
+        IRCOMM_CONN,
+} IRCOMM_STATE;
+
+/* IrCOMM Events */
+typedef enum {
+        IRCOMM_CONNECT_REQUEST,
+        IRCOMM_CONNECT_RESPONSE,
+        IRCOMM_TTP_CONNECT_INDICATION,
+	IRCOMM_LMP_CONNECT_INDICATION,
+        IRCOMM_TTP_CONNECT_CONFIRM,
+	IRCOMM_LMP_CONNECT_CONFIRM,
+
+        IRCOMM_LMP_DISCONNECT_INDICATION,
+	IRCOMM_TTP_DISCONNECT_INDICATION,
+        IRCOMM_DISCONNECT_REQUEST,
+
+        IRCOMM_TTP_DATA_INDICATION,
+	IRCOMM_LMP_DATA_INDICATION,
+        IRCOMM_DATA_REQUEST,
+        IRCOMM_CONTROL_REQUEST,
+        IRCOMM_CONTROL_INDICATION,
+} IRCOMM_EVENT;
+
+/*
+ * Used for passing information through the state-machine
+ */
+struct ircomm_info {
+        __u32     saddr;               /* Source device address */
+        __u32     daddr;               /* Destination device address */
+        __u8      dlsap_sel;
+        LM_REASON reason;              /* Reason for disconnect */
+	__u32     max_data_size;
+	__u32     max_header_size;
+
+	struct qos_info *qos;
+};
+
+extern char *ircomm_state[];
+
+struct ircomm_cb;   /* Forward decl. */
+
+int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event,
+		    struct sk_buff *skb, struct ircomm_info *info);
+void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state);
+
+#endif
diff --git a/include/net/irda/ircomm_lmp.h b/include/net/irda/ircomm_lmp.h
new file mode 100644
index 000000000000..ae02106be590
--- /dev/null
+++ b/include/net/irda/ircomm_lmp.h
@@ -0,0 +1,38 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_lmp.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 10:06:07 1999
+ * Modified at:   Fri Aug 13 07:32:32 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_LMP_H
+#define IRCOMM_LMP_H
+
+#include <net/irda/ircomm_core.h>
+
+int ircomm_open_lsap(struct ircomm_cb *self);
+
+#endif
diff --git a/include/net/irda/ircomm_param.h b/include/net/irda/ircomm_param.h
new file mode 100644
index 000000000000..e6678800c41f
--- /dev/null
+++ b/include/net/irda/ircomm_param.h
@@ -0,0 +1,149 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_param.h
+ * Version:       1.0
+ * Description:   Parameter handling for the IrCOMM protocol
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 08:47:28 1999
+ * Modified at:   Wed Aug 25 13:46:33 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_PARAMS_H
+#define IRCOMM_PARAMS_H
+
+#include <net/irda/parameters.h>
+
+/* Parameters common to all service types */
+#define IRCOMM_SERVICE_TYPE     0x00
+#define IRCOMM_PORT_TYPE        0x01 /* Only used in LM-IAS */
+#define IRCOMM_PORT_NAME        0x02 /* Only used in LM-IAS */
+
+/* Parameters for both 3 wire and 9 wire */
+#define IRCOMM_DATA_RATE        0x10
+#define IRCOMM_DATA_FORMAT      0x11
+#define IRCOMM_FLOW_CONTROL     0x12
+#define IRCOMM_XON_XOFF         0x13
+#define IRCOMM_ENQ_ACK          0x14
+#define IRCOMM_LINE_STATUS      0x15
+#define IRCOMM_BREAK            0x16
+
+/* Parameters for 9 wire */
+#define IRCOMM_DTE              0x20
+#define IRCOMM_DCE              0x21
+#define IRCOMM_POLL             0x22
+
+/* Service type (details) */
+#define IRCOMM_3_WIRE_RAW       0x01
+#define IRCOMM_3_WIRE           0x02
+#define IRCOMM_9_WIRE           0x04
+#define IRCOMM_CENTRONICS       0x08
+
+/* Port type (details) */
+#define IRCOMM_SERIAL           0x00
+#define IRCOMM_PARALLEL         0x01
+
+/* Data format (details) */
+#define IRCOMM_WSIZE_5          0x00
+#define IRCOMM_WSIZE_6          0x01
+#define IRCOMM_WSIZE_7          0x02
+#define IRCOMM_WSIZE_8          0x03
+
+#define IRCOMM_1_STOP_BIT       0x00
+#define IRCOMM_2_STOP_BIT       0x04 /* 1.5 if char len 5 */
+
+#define IRCOMM_PARITY_DISABLE   0x00
+#define IRCOMM_PARITY_ENABLE    0x08
+
+#define IRCOMM_PARITY_ODD       0x00
+#define IRCOMM_PARITY_EVEN      0x10
+#define IRCOMM_PARITY_MARK      0x20
+#define IRCOMM_PARITY_SPACE     0x30
+
+/* Flow control */
+#define IRCOMM_XON_XOFF_IN      0x01
+#define IRCOMM_XON_XOFF_OUT     0x02
+#define IRCOMM_RTS_CTS_IN       0x04
+#define IRCOMM_RTS_CTS_OUT      0x08
+#define IRCOMM_DSR_DTR_IN       0x10
+#define IRCOMM_DSR_DTR_OUT      0x20
+#define IRCOMM_ENQ_ACK_IN       0x40
+#define IRCOMM_ENQ_ACK_OUT      0x80
+
+/* Line status */
+#define IRCOMM_OVERRUN_ERROR    0x02
+#define IRCOMM_PARITY_ERROR     0x04
+#define IRCOMM_FRAMING_ERROR    0x08
+
+/* DTE (Data terminal equipment) line settings */
+#define IRCOMM_DELTA_DTR        0x01
+#define IRCOMM_DELTA_RTS        0x02
+#define IRCOMM_DTR              0x04
+#define IRCOMM_RTS              0x08
+
+/* DCE (Data communications equipment) line settings */
+#define IRCOMM_DELTA_CTS        0x01  /* Clear to send has changed */
+#define IRCOMM_DELTA_DSR        0x02  /* Data set ready has changed */
+#define IRCOMM_DELTA_RI         0x04  /* Ring indicator has changed */
+#define IRCOMM_DELTA_CD         0x08  /* Carrier detect has changed */
+#define IRCOMM_CTS              0x10  /* Clear to send is high */
+#define IRCOMM_DSR              0x20  /* Data set ready is high */
+#define IRCOMM_RI               0x40  /* Ring indicator is high */
+#define IRCOMM_CD               0x80  /* Carrier detect is high */
+#define IRCOMM_DCE_DELTA_ANY    0x0f
+
+/*
+ * Parameter state
+ */
+struct ircomm_params {
+	/* General control params */
+	__u8  service_type;
+	__u8  port_type;
+	char  port_name[32];
+
+	/* Control params for 3- and 9-wire service type */
+	__u32 data_rate;         /* Data rate in bps */
+	__u8  data_format;
+	__u8  flow_control;
+	char  xonxoff[2];
+	char  enqack[2];
+	__u8  line_status;
+	__u8  _break;
+
+	__u8  null_modem;
+
+	/* Control params for 9-wire service type */
+	__u8 dte;
+	__u8 dce;
+	__u8 poll;
+
+	/* Control params for Centronics service type */
+};
+
+struct ircomm_tty_cb; /* Forward decl. */
+
+int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush);
+
+extern pi_param_info_t ircomm_param_info;
+
+#endif /* IRCOMM_PARAMS_H */
+
diff --git a/include/net/irda/ircomm_ttp.h b/include/net/irda/ircomm_ttp.h
new file mode 100644
index 000000000000..403081ed725c
--- /dev/null
+++ b/include/net/irda/ircomm_ttp.h
@@ -0,0 +1,39 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_ttp.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 10:06:07 1999
+ * Modified at:   Fri Aug 13 07:32:22 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTP_H
+#define IRCOMM_TTP_H
+
+#include <net/irda/ircomm_core.h>
+
+int  ircomm_open_tsap(struct ircomm_cb *self);
+
+#endif
+
diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h
new file mode 100644
index 000000000000..87699cb4ef8c
--- /dev/null
+++ b/include/net/irda/ircomm_tty.h
@@ -0,0 +1,139 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 23:24:22 1999
+ * Modified at:   Fri Jan 28 13:16:57 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTY_H
+#define IRCOMM_TTY_H
+
+#include <linux/serial.h>
+#include <linux/termios.h>
+#include <linux/timer.h>
+#include <linux/tty.h>		/* struct tty_struct */
+
+#include <net/irda/irias_object.h>
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+
+#define IRCOMM_TTY_PORTS 32
+#define IRCOMM_TTY_MAGIC 0x3432
+#define IRCOMM_TTY_MAJOR 161
+#define IRCOMM_TTY_MINOR 0
+
+/* This is used as an initial value to max_header_size before the proper
+ * value is filled in (5 for ttp, 4 for lmp). This allow us to detect
+ * the state of the underlying connection. - Jean II */
+#define IRCOMM_TTY_HDR_UNINITIALISED	16
+/* Same for payload size. See qos.c for the smallest max data size */
+#define IRCOMM_TTY_DATA_UNINITIALISED	(64 - IRCOMM_TTY_HDR_UNINITIALISED)
+
+/* Those are really defined in include/linux/serial.h - Jean II */
+#define ASYNC_B_INITIALIZED	31	/* Serial port was initialized */
+#define ASYNC_B_NORMAL_ACTIVE	29	/* Normal device is active */
+#define ASYNC_B_CLOSING		27	/* Serial port is closing */
+
+/*
+ * IrCOMM TTY driver state
+ */
+struct ircomm_tty_cb {
+	irda_queue_t queue;            /* Must be first */
+	magic_t magic;
+
+	int state;                /* Connect state */
+
+	struct tty_struct *tty;
+	struct ircomm_cb *ircomm; /* IrCOMM layer instance */
+
+	struct sk_buff *tx_skb;   /* Transmit buffer */
+	struct sk_buff *ctrl_skb; /* Control data buffer */
+
+	/* Parameters */
+	struct ircomm_params settings;
+
+	__u8 service_type;        /* The service that we support */
+	int client;               /* True if we are a client */
+	LOCAL_FLOW flow;          /* IrTTP flow status */
+
+	int line;
+	unsigned long flags;
+
+	__u8 dlsap_sel;
+	__u8 slsap_sel;
+
+	__u32 saddr;
+	__u32 daddr;
+
+	__u32 max_data_size;   /* Max data we can transmit in one packet */
+	__u32 max_header_size; /* The amount of header space we must reserve */
+	__u32 tx_data_size;	/* Max data size of current tx_skb */
+
+	struct iriap_cb *iriap; /* Instance used for querying remote IAS */
+	struct ias_object* obj;
+	void *skey;
+	void *ckey;
+
+	wait_queue_head_t open_wait;
+	wait_queue_head_t close_wait;
+	struct timer_list watchdog_timer;
+	struct work_struct  tqueue;
+
+        unsigned short    close_delay;
+        unsigned short    closing_wait; /* time to wait before closing */
+
+	int  open_count;
+	int  blocked_open;	/* # of blocked opens */
+
+	/* Protect concurent access to :
+	 *	o self->open_count
+	 *	o self->ctrl_skb
+	 *	o self->tx_skb
+	 * Maybe other things may gain to be protected as well...
+	 * Jean II */
+	spinlock_t spinlock;
+};
+
+void ircomm_tty_start(struct tty_struct *tty);
+void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self);
+
+extern int ircomm_tty_tiocmget(struct tty_struct *tty, struct file *file);
+extern int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file,
+			       unsigned int set, unsigned int clear);
+extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, 
+			    unsigned int cmd, unsigned long arg);
+extern void ircomm_tty_set_termios(struct tty_struct *tty, 
+				   struct termios *old_termios);
+extern hashbin_t *ircomm_tty;
+
+#endif
+
+
+
+
+
+
+
diff --git a/include/net/irda/ircomm_tty_attach.h b/include/net/irda/ircomm_tty_attach.h
new file mode 100644
index 000000000000..f91a5695aa44
--- /dev/null
+++ b/include/net/irda/ircomm_tty_attach.h
@@ -0,0 +1,94 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty_attach.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 15:55:18 1999
+ * Modified at:   Fri Dec 10 21:04:55 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTY_ATTACH_H
+#define IRCOMM_TTY_ATTACH_H
+
+#include <net/irda/ircomm_tty.h>
+
+typedef enum {
+        IRCOMM_TTY_IDLE,
+	IRCOMM_TTY_SEARCH,
+        IRCOMM_TTY_QUERY_PARAMETERS,
+	IRCOMM_TTY_QUERY_LSAP_SEL,
+	IRCOMM_TTY_SETUP,
+        IRCOMM_TTY_READY,
+} IRCOMM_TTY_STATE;
+
+/* IrCOMM TTY Events */
+typedef enum {
+	IRCOMM_TTY_ATTACH_CABLE,
+	IRCOMM_TTY_DETACH_CABLE,
+	IRCOMM_TTY_DATA_REQUEST,
+	IRCOMM_TTY_DATA_INDICATION,
+	IRCOMM_TTY_DISCOVERY_REQUEST,
+	IRCOMM_TTY_DISCOVERY_INDICATION,
+	IRCOMM_TTY_CONNECT_CONFIRM,
+	IRCOMM_TTY_CONNECT_INDICATION,
+	IRCOMM_TTY_DISCONNECT_REQUEST,
+	IRCOMM_TTY_DISCONNECT_INDICATION,
+	IRCOMM_TTY_WD_TIMER_EXPIRED,
+	IRCOMM_TTY_GOT_PARAMETERS,
+	IRCOMM_TTY_GOT_LSAPSEL,
+} IRCOMM_TTY_EVENT;
+
+/* Used for passing information through the state-machine */
+struct ircomm_tty_info {
+        __u32     saddr;               /* Source device address */
+        __u32     daddr;               /* Destination device address */
+        __u8      dlsap_sel;
+};
+
+extern char *ircomm_state[];
+extern char *ircomm_tty_state[];
+
+int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+			struct sk_buff *skb, struct ircomm_tty_info *info);
+
+
+int  ircomm_tty_attach_cable(struct ircomm_tty_cb *self);
+void ircomm_tty_detach_cable(struct ircomm_tty_cb *self);
+void ircomm_tty_connect_confirm(void *instance, void *sap, 
+				struct qos_info *qos, 
+				__u32 max_sdu_size, 
+				__u8 max_header_size, 
+				struct sk_buff *skb);
+void ircomm_tty_disconnect_indication(void *instance, void *sap, 
+				      LM_REASON reason,
+				      struct sk_buff *skb);
+void ircomm_tty_connect_indication(void *instance, void *sap, 
+				   struct qos_info *qos, 
+				   __u32 max_sdu_size,
+				   __u8 max_header_size, 
+				   struct sk_buff *skb);
+int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self);
+void ircomm_tty_link_established(struct ircomm_tty_cb *self);
+
+#endif /* IRCOMM_TTY_ATTACH_H */
diff --git a/include/net/irda/irda.h b/include/net/irda/irda.h
new file mode 100644
index 000000000000..05a840837fe7
--- /dev/null
+++ b/include/net/irda/irda.h
@@ -0,0 +1,117 @@
+/*********************************************************************
+ *                
+ * Filename:      irda.h
+ * Version:       1.0
+ * Description:   IrDA common include file for kernel internal use
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Dec  9 21:13:12 1997
+ * Modified at:   Fri Jan 28 13:16:32 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef NET_IRDA_H
+#define NET_IRDA_H
+
+#include <linux/config.h>
+#include <linux/skbuff.h>		/* struct sk_buff */
+#include <linux/kernel.h>
+#include <linux/if.h>			/* sa_family_t in <linux/irda.h> */
+#include <linux/irda.h>
+
+typedef __u32 magic_t;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE 
+#define FALSE 0
+#endif
+
+/* Hack to do small backoff when setting media busy in IrLAP */
+#ifndef SMALL
+#define SMALL 5
+#endif
+
+#ifndef IRDA_MIN /* Lets not mix this MIN with other header files */
+#define IRDA_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#endif
+
+#ifndef IRDA_ALIGN
+#  define IRDA_ALIGN __attribute__((aligned))
+#endif
+#ifndef IRDA_PACK
+#  define IRDA_PACK __attribute__((packed))
+#endif
+
+
+#ifdef CONFIG_IRDA_DEBUG
+
+extern unsigned int irda_debug;
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#define IRDA_DEBUG_LEVEL 0
+
+#define IRDA_DEBUG(n, args...) \
+do {	if (irda_debug >= (n)) \
+		printk(KERN_DEBUG args); \
+} while (0)
+#define IRDA_ASSERT(expr, func) \
+do { if(!(expr)) { \
+	printk( "Assertion failed! %s:%s:%d %s\n", \
+		__FILE__,__FUNCTION__,__LINE__,(#expr) ); \
+	func } } while (0)
+#define IRDA_ASSERT_LABEL(label)	label
+#else
+#define IRDA_DEBUG(n, args...) do { } while (0)
+#define IRDA_ASSERT(expr, func) do { (void)(expr); } while (0)
+#define IRDA_ASSERT_LABEL(label)
+#endif /* CONFIG_IRDA_DEBUG */
+
+#define IRDA_WARNING(args...) printk(KERN_WARNING args)
+#define IRDA_MESSAGE(args...) printk(KERN_INFO args)
+#define IRDA_ERROR(args...)   printk(KERN_ERR args)
+
+/*
+ *  Magic numbers used by Linux-IrDA. Random numbers which must be unique to 
+ *  give the best protection
+ */
+
+#define IRTTY_MAGIC        0x2357
+#define LAP_MAGIC          0x1357
+#define LMP_MAGIC          0x4321
+#define LMP_LSAP_MAGIC     0x69333
+#define LMP_LAP_MAGIC      0x3432
+#define IRDA_DEVICE_MAGIC  0x63454
+#define IAS_MAGIC          0x007
+#define TTP_MAGIC          0x241169
+#define TTP_TSAP_MAGIC     0x4345
+#define IROBEX_MAGIC       0x341324
+#define HB_MAGIC           0x64534
+#define IRLAN_MAGIC        0x754
+#define IAS_OBJECT_MAGIC   0x34234
+#define IAS_ATTRIB_MAGIC   0x45232
+#define IRDA_TASK_MAGIC    0x38423
+
+#define IAS_DEVICE_ID 0x0000 /* Defined by IrDA, IrLMP section 4.1 (page 68) */
+#define IAS_PNP_ID    0xd342
+#define IAS_OBEX_ID   0x34323
+#define IAS_IRLAN_ID  0x34234
+#define IAS_IRCOMM_ID 0x2343
+#define IAS_IRLPT_ID  0x9876
+
+#endif /* NET_IRDA_H */
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
new file mode 100644
index 000000000000..3b216f186f18
--- /dev/null
+++ b/include/net/irda/irda_device.h
@@ -0,0 +1,301 @@
+/*********************************************************************
+ *                
+ * Filename:      irda_device.h
+ * Version:       0.9
+ * Description:   Contains various declarations used by the drivers
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Apr 14 12:41:42 1998
+ * Modified at:   Mon Mar 20 09:08:57 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+/*
+ * This header contains all the IrDA definitions a driver really
+ * needs, and therefore the driver should not need to include
+ * any other IrDA headers - Jean II
+ */
+
+#ifndef IRDA_DEVICE_H
+#define IRDA_DEVICE_H
+
+#include <linux/config.h>
+#include <linux/tty.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>		/* struct sk_buff */
+#include <linux/irda.h>
+#include <linux/types.h>
+
+#include <net/pkt_sched.h>
+#include <net/irda/irda.h>
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+
+/* Some non-standard interface flags (should not conflict with any in if.h) */
+#define IFF_SIR 	0x0001 /* Supports SIR speeds */
+#define IFF_MIR 	0x0002 /* Supports MIR speeds */
+#define IFF_FIR 	0x0004 /* Supports FIR speeds */
+#define IFF_VFIR        0x0008 /* Supports VFIR speeds */
+#define IFF_PIO   	0x0010 /* Supports PIO transfer of data */
+#define IFF_DMA		0x0020 /* Supports DMA transfer of data */
+#define IFF_SHM         0x0040 /* Supports shared memory data transfers */
+#define IFF_DONGLE      0x0080 /* Interface has a dongle attached */
+#define IFF_AIR         0x0100 /* Supports Advanced IR (AIR) standards */
+
+#define IO_XMIT 0x01
+#define IO_RECV 0x02
+
+typedef enum {
+	IRDA_IRLAP, /* IrDA mode, and deliver to IrLAP */
+	IRDA_RAW,   /* IrDA mode */
+	SHARP_ASK,
+	TV_REMOTE,  /* Also known as Consumer Electronics IR */
+} INFRARED_MODE;
+
+typedef enum {
+	IRDA_TASK_INIT,        /* All tasks are initialized with this state */
+	IRDA_TASK_DONE,        /* Signals that the task is finished */
+	IRDA_TASK_WAIT,
+	IRDA_TASK_WAIT1,
+	IRDA_TASK_WAIT2,
+	IRDA_TASK_WAIT3,
+	IRDA_TASK_CHILD_INIT,  /* Initializing child task */
+	IRDA_TASK_CHILD_WAIT,  /* Waiting for child task to finish */
+	IRDA_TASK_CHILD_DONE   /* Child task is finished */
+} IRDA_TASK_STATE;
+
+struct irda_task;
+typedef int (*IRDA_TASK_CALLBACK) (struct irda_task *task);
+
+struct irda_task {
+	irda_queue_t q;
+	magic_t magic;
+
+	IRDA_TASK_STATE state;
+	IRDA_TASK_CALLBACK function;
+	IRDA_TASK_CALLBACK finished;
+
+	struct irda_task *parent;
+	struct timer_list timer;
+
+	void *instance; /* Instance being called */
+	void *param;    /* Parameter to be used by instance */
+};
+
+/* Dongle info */
+struct dongle_reg;
+typedef struct {
+	struct dongle_reg *issue;     /* Registration info */
+	struct net_device *dev;           /* Device we are attached to */
+	struct irda_task *speed_task; /* Task handling speed change */
+	struct irda_task *reset_task; /* Task handling reset */
+	__u32 speed;                  /* Current speed */
+
+	/* Callbacks to the IrDA device driver */
+	int (*set_mode)(struct net_device *, int mode);
+	int (*read)(struct net_device *dev, __u8 *buf, int len);
+	int (*write)(struct net_device *dev, __u8 *buf, int len);
+	int (*set_dtr_rts)(struct net_device *dev, int dtr, int rts);
+} dongle_t;
+
+/* Dongle registration info */
+struct dongle_reg {
+	irda_queue_t q;         /* Must be first */
+	IRDA_DONGLE type;
+
+	void (*open)(dongle_t *dongle, struct qos_info *qos);
+	void (*close)(dongle_t *dongle);
+	int  (*reset)(struct irda_task *task);
+	int  (*change_speed)(struct irda_task *task);
+	struct module *owner;
+};
+
+/* 
+ * Per-packet information we need to hide inside sk_buff 
+ * (must not exceed 48 bytes, check with struct sk_buff) 
+ */
+struct irda_skb_cb {
+	magic_t magic;       /* Be sure that we can trust the information */
+	__u32   next_speed;  /* The Speed to be set *after* this frame */
+	__u16   mtt;         /* Minimum turn around time */
+	__u16   xbofs;       /* Number of xbofs required, used by SIR mode */
+	__u16   next_xbofs;  /* Number of xbofs required *after* this frame */
+	void    *context;    /* May be used by drivers */
+	void    (*destructor)(struct sk_buff *skb); /* Used for flow control */
+	__u16   xbofs_delay; /* Number of xbofs used for generating the mtt */
+	__u8    line;        /* Used by IrCOMM in IrLPT mode */
+};
+
+/* Chip specific info */
+typedef struct {
+	int cfg_base;         /* Config register IO base */
+        int sir_base;         /* SIR IO base */
+	int fir_base;         /* FIR IO base */
+	int mem_base;         /* Shared memory base */
+        int sir_ext;          /* Length of SIR iobase */
+	int fir_ext;          /* Length of FIR iobase */
+        int irq, irq2;        /* Interrupts used */
+        int dma, dma2;        /* DMA channel(s) used */
+        int fifo_size;        /* FIFO size */
+        int irqflags;         /* interrupt flags (ie, SA_SHIRQ|SA_INTERRUPT) */
+	int direction;        /* Link direction, used by some FIR drivers */
+	int enabled;          /* Powered on? */
+	int suspended;        /* Suspended by APM */
+	__u32 speed;          /* Currently used speed */
+	__u32 new_speed;      /* Speed we must change to when Tx is finished */
+	int dongle_id;        /* Dongle or transceiver currently used */
+} chipio_t;
+
+/* IO buffer specific info (inspired by struct sk_buff) */
+typedef struct {
+	int state;            /* Receiving state (transmit state not used) */
+	int in_frame;         /* True if receiving frame */
+
+	__u8 *head;	      /* start of buffer */
+	__u8 *data;	      /* start of data in buffer */
+
+	int len;	      /* current length of data */
+	int truesize;	      /* total allocated size of buffer */
+	__u16 fcs;
+
+	struct sk_buff *skb;	/* ZeroCopy Rx in async_unwrap_char() */
+} iobuff_t;
+
+/* Maximum SIR frame (skb) that we expect to receive *unwrapped*.
+ * Max LAP MTU (I field) is 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
+ * Max LAP header is 2 bytes (for now).
+ * Max CRC is 2 bytes at SIR, 4 bytes at FIR. 
+ * Need 1 byte for skb_reserve() to align IP header for IrLAN.
+ * Add a few extra bytes just to be safe (buffer is power of two anyway)
+ * Jean II */
+#define IRDA_SKB_MAX_MTU	2064
+/* Maximum SIR frame that we expect to send, wrapped (i.e. with XBOFS
+ * and escaped characters on top of above). */
+#define IRDA_SIR_MAX_FRAME	4269
+
+/* The SIR unwrapper async_unwrap_char() will use a Rx-copy-break mechanism
+ * when using the optional ZeroCopy Rx, where only small frames are memcpy
+ * to a smaller skb to save memory. This is the threshold under which copy
+ * will happen (and over which it won't happen).
+ * Some FIR drivers may use this #define as well...
+ * This is the same value as various Ethernet drivers. - Jean II */
+#define IRDA_RX_COPY_THRESHOLD  256
+
+/* Function prototypes */
+int  irda_device_init(void);
+void irda_device_cleanup(void);
+
+/* IrLAP entry points used by the drivers.
+ * We declare them here to avoid the driver pulling a whole bunch stack
+ * headers they don't really need - Jean II */
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+			    const char *hw_name);
+void irlap_close(struct irlap_cb *self);
+
+/* Interface to be uses by IrLAP */
+void irda_device_set_media_busy(struct net_device *dev, int status);
+int  irda_device_is_media_busy(struct net_device *dev);
+int  irda_device_is_receiving(struct net_device *dev);
+
+/* Interface for internal use */
+static inline int irda_device_txqueue_empty(const struct net_device *dev)
+{
+	return (skb_queue_len(&dev->qdisc->q) == 0);
+}
+int  irda_device_set_raw_mode(struct net_device* self, int status);
+struct net_device *alloc_irdadev(int sizeof_priv);
+
+/* Dongle interface */
+void irda_device_unregister_dongle(struct dongle_reg *dongle);
+int  irda_device_register_dongle(struct dongle_reg *dongle);
+dongle_t *irda_device_dongle_init(struct net_device *dev, int type);
+int irda_device_dongle_cleanup(dongle_t *dongle);
+
+#ifdef CONFIG_ISA
+void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode);
+#endif
+
+void irda_task_delete(struct irda_task *task);
+struct irda_task *irda_task_execute(void *instance, 
+				    IRDA_TASK_CALLBACK function, 
+				    IRDA_TASK_CALLBACK finished, 
+				    struct irda_task *parent, void *param);
+void irda_task_next_state(struct irda_task *task, IRDA_TASK_STATE state);
+
+/*
+ * Function irda_get_mtt (skb)
+ *
+ *    Utility function for getting the minimum turnaround time out of 
+ *    the skb, where it has been hidden in the cb field.
+ */
+static inline __u16 irda_get_mtt(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->mtt : 10000;
+}
+
+/*
+ * Function irda_get_next_speed (skb)
+ *
+ *    Extract the speed that should be set *after* this frame from the skb
+ *
+ * Note : return -1 for user space frames
+ */
+static inline __u32 irda_get_next_speed(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->next_speed : -1;
+}
+
+/*
+ * Function irda_get_next_xbofs (skb)
+ *
+ *    Extract the xbofs that should be set for this frame from the skb
+ *
+ * Note : default to 10 for user space frames
+ */
+static inline __u16 irda_get_xbofs(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->xbofs : 10;
+}
+
+/*
+ * Function irda_get_next_xbofs (skb)
+ *
+ *    Extract the xbofs that should be set *after* this frame from the skb
+ *
+ * Note : return -1 for user space frames
+ */
+static inline __u16 irda_get_next_xbofs(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->next_xbofs : -1;
+}
+#endif /* IRDA_DEVICE_H */
+
+
diff --git a/include/net/irda/iriap.h b/include/net/irda/iriap.h
new file mode 100644
index 000000000000..2007c5a0a43f
--- /dev/null
+++ b/include/net/irda/iriap.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      iriap.h
+ * Version:       0.5
+ * Description:   Information Access Protocol (IAP)
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Aug 21 00:02:07 1997
+ * Modified at:   Sat Dec 25 16:42:09 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRIAP_H
+#define IRIAP_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/iriap_event.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/timer.h>		/* struct timer_list */
+
+#define IAP_LST 0x80
+#define IAP_ACK 0x40
+
+#define IAS_SERVER 0
+#define IAS_CLIENT 1
+
+/* IrIAP Op-codes */
+#define GET_INFO_BASE      0x01
+#define GET_OBJECTS        0x02
+#define GET_VALUE          0x03
+#define GET_VALUE_BY_CLASS 0x04
+#define GET_OBJECT_INFO    0x05
+#define GET_ATTRIB_NAMES   0x06
+
+#define IAS_SUCCESS        0
+#define IAS_CLASS_UNKNOWN  1
+#define IAS_ATTRIB_UNKNOWN 2
+#define IAS_DISCONNECT     10
+
+typedef void (*CONFIRM_CALLBACK)(int result, __u16 obj_id, 
+				 struct ias_value *value, void *priv);
+
+struct iriap_cb {
+	irda_queue_t q; /* Must be first */	
+	magic_t magic;  /* Magic cookie */
+
+	int          mode;   /* Client or server */
+
+	__u32        saddr;
+	__u32        daddr;
+	__u8         operation;
+
+	struct sk_buff *request_skb;
+	struct lsap_cb *lsap;
+	__u8 slsap_sel;
+
+	/* Client states */
+	IRIAP_STATE client_state;
+	IRIAP_STATE call_state;
+	
+	/* Server states */
+	IRIAP_STATE server_state;
+	IRIAP_STATE r_connect_state;
+	
+	CONFIRM_CALLBACK confirm;
+	void *priv;                /* Used to identify client */
+
+	__u8 max_header_size;
+	__u32 max_data_size;
+	
+	struct timer_list watchdog_timer;
+};
+
+int  iriap_init(void);
+void iriap_cleanup(void);
+
+struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv, 
+			    CONFIRM_CALLBACK callback);
+void iriap_close(struct iriap_cb *self);
+
+int iriap_getvaluebyclass_request(struct iriap_cb *self, 
+				  __u32 saddr, __u32 daddr,
+				  char *name, char *attr);
+void iriap_connect_request(struct iriap_cb *self);
+void iriap_send_ack( struct iriap_cb *self);
+void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb);
+
+void iriap_register_server(void);
+
+#endif
+
+
diff --git a/include/net/irda/iriap_event.h b/include/net/irda/iriap_event.h
new file mode 100644
index 000000000000..4ca3d2071b03
--- /dev/null
+++ b/include/net/irda/iriap_event.h
@@ -0,0 +1,85 @@
+/*********************************************************************
+ *                
+ * Filename:      iriap_event.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Sun Oct 31 22:02:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRIAP_FSM_H
+#define IRIAP_FSM_H
+
+/* Forward because of circular include dependecies */
+struct iriap_cb;
+
+/* IrIAP states */
+typedef enum {
+	/* Client */
+	S_DISCONNECT,
+	S_CONNECTING,
+	S_CALL,
+
+	/* S-Call */
+	S_MAKE_CALL,
+	S_CALLING,
+	S_OUTSTANDING,
+	S_REPLYING,
+	S_WAIT_FOR_CALL,
+	S_WAIT_ACTIVE,
+
+	/* Server */
+	R_DISCONNECT,
+	R_CALL,
+	
+	/* R-Connect */
+	R_WAITING,
+	R_WAIT_ACTIVE,
+	R_RECEIVING,
+	R_EXECUTE,
+	R_RETURNING,
+} IRIAP_STATE;
+
+typedef enum {
+	IAP_CALL_REQUEST,
+	IAP_CALL_REQUEST_GVBC,
+	IAP_CALL_RESPONSE,
+	IAP_RECV_F_LST,
+	IAP_LM_DISCONNECT_INDICATION,
+	IAP_LM_CONNECT_INDICATION,
+	IAP_LM_CONNECT_CONFIRM,
+} IRIAP_EVENT;
+
+void iriap_next_client_state   (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_call_state     (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_server_state   (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state);
+
+
+void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event, 
+			   struct sk_buff *skb);
+void iriap_do_call_event  (struct iriap_cb *self, IRIAP_EVENT event, 
+			   struct sk_buff *skb);
+
+void iriap_do_server_event   (struct iriap_cb *self, IRIAP_EVENT event, 
+			      struct sk_buff *skb);
+void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event, 
+			      struct sk_buff *skb);
+
+#endif /* IRIAP_FSM_H */
+
diff --git a/include/net/irda/irias_object.h b/include/net/irda/irias_object.h
new file mode 100644
index 000000000000..c41196b87955
--- /dev/null
+++ b/include/net/irda/irias_object.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      irias_object.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct  1 22:49:50 1998
+ * Modified at:   Wed Dec 15 11:20:57 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef LM_IAS_OBJECT_H
+#define LM_IAS_OBJECT_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+
+/* LM-IAS Attribute types */
+#define IAS_MISSING 0
+#define IAS_INTEGER 1
+#define IAS_OCT_SEQ 2
+#define IAS_STRING  3
+
+/* Object ownership of attributes (user or kernel) */
+#define IAS_KERNEL_ATTR	0
+#define IAS_USER_ATTR	1
+
+/*
+ *  LM-IAS Object
+ */
+struct ias_object {
+	irda_queue_t q;     /* Must be first! */
+	magic_t magic;
+	
+	char  *name;
+	int   id;
+	hashbin_t *attribs;
+};
+
+/*
+ *  Values used by LM-IAS attributes
+ */
+struct ias_value {
+        __u8    type;    /* Value description */
+	__u8	owner;	/* Managed from user/kernel space */
+	int     charset; /* Only used by string type */
+        int     len;
+	
+	/* Value */
+	union {
+		int integer;
+		char *string;
+		__u8 *oct_seq;
+	} t;
+};
+
+/*
+ *  Attributes used by LM-IAS objects
+ */
+struct ias_attrib {
+	irda_queue_t q; /* Must be first! */
+	int magic;
+
+        char *name;   	         /* Attribute name */
+	struct ias_value *value; /* Attribute value */
+};
+
+struct ias_object *irias_new_object(char *name, int id);
+void irias_insert_object(struct ias_object *obj);
+int  irias_delete_object(struct ias_object *obj);
+int  irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+			 int cleanobject);
+void __irias_delete_object(struct ias_object *obj);
+
+void irias_add_integer_attrib(struct ias_object *obj, char *name, int value,
+			      int user);
+void irias_add_string_attrib(struct ias_object *obj, char *name, char *value,
+			     int user);
+void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets,
+			     int len, int user);
+int irias_object_change_attribute(char *obj_name, char *attrib_name, 
+				  struct ias_value *new_value);
+struct ias_object *irias_find_object(char *name);
+struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name);
+
+struct ias_value *irias_new_string_value(char *string);
+struct ias_value *irias_new_integer_value(int integer);
+struct ias_value *irias_new_octseq_value(__u8 *octseq , int len);
+struct ias_value *irias_new_missing_value(void);
+void irias_delete_value(struct ias_value *value);
+
+extern struct ias_value irias_missing;
+extern hashbin_t *irias_objects;
+
+#endif
diff --git a/include/net/irda/irlan_client.h b/include/net/irda/irlan_client.h
new file mode 100644
index 000000000000..736dabe211e3
--- /dev/null
+++ b/include/net/irda/irlan_client.h
@@ -0,0 +1,42 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_client.h
+ * Version:       0.3
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Thu Apr 22 14:13:34 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_CLIENT_H
+#define IRLAN_CLIENT_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irias_object.h>
+#include <net/irda/irlan_event.h>
+
+void irlan_client_discovery_indication(discinfo_t *, DISCOVERY_MODE, void *);
+void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr);
+
+void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb);
+void irlan_client_get_value_confirm(int result, __u16 obj_id, 
+				    struct ias_value *value, void *priv);
+#endif
diff --git a/include/net/irda/irlan_common.h b/include/net/irda/irlan_common.h
new file mode 100644
index 000000000000..1c73bdbc3eb3
--- /dev/null
+++ b/include/net/irda/irlan_common.h
@@ -0,0 +1,222 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_common.h
+ * Version:       0.8
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun Oct 31 19:41:24 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_H
+#define IRLAN_H
+
+#include <asm/param.h>  /* for HZ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irttp.h>
+
+#define IRLAN_MTU        1518
+#define IRLAN_TIMEOUT    10*HZ /* 10 seconds */
+
+/* Command packet types */
+#define CMD_GET_PROVIDER_INFO   0
+#define CMD_GET_MEDIA_CHAR      1
+#define CMD_OPEN_DATA_CHANNEL   2
+#define CMD_CLOSE_DATA_CHAN     3
+#define CMD_RECONNECT_DATA_CHAN 4
+#define CMD_FILTER_OPERATION    5
+
+/* Some responses */
+#define RSP_SUCCESS                 0
+#define RSP_INSUFFICIENT_RESOURCES  1
+#define RSP_INVALID_COMMAND_FORMAT  2
+#define RSP_COMMAND_NOT_SUPPORTED   3
+#define RSP_PARAM_NOT_SUPPORTED     4
+#define RSP_VALUE_NOT_SUPPORTED     5
+#define RSP_NOT_OPEN                6
+#define RSP_AUTHENTICATION_REQUIRED 7
+#define RSP_INVALID_PASSWORD        8
+#define RSP_PROTOCOL_ERROR          9
+#define RSP_ASYNCHRONOUS_ERROR    255
+
+/* Media types */
+#define MEDIA_802_3 1
+#define MEDIA_802_5 2
+
+/* Filter parameters */
+#define DATA_CHAN   1
+#define FILTER_TYPE 2
+#define FILTER_MODE 3
+
+/* Filter types */
+#define IRLAN_DIRECTED   0x01
+#define IRLAN_FUNCTIONAL 0x02
+#define IRLAN_GROUP      0x04
+#define IRLAN_MAC_FRAME  0x08
+#define IRLAN_MULTICAST  0x10
+#define IRLAN_BROADCAST  0x20
+#define IRLAN_IPX_SOCKET 0x40
+
+/* Filter modes */
+#define ALL     1
+#define FILTER  2
+#define NONE    3
+
+/* Filter operations */
+#define GET     1
+#define CLEAR   2
+#define ADD     3
+#define REMOVE  4
+#define DYNAMIC 5
+
+/* Access types */
+#define ACCESS_DIRECT  1
+#define ACCESS_PEER    2
+#define ACCESS_HOSTED  3
+
+#define IRLAN_BYTE   0
+#define IRLAN_SHORT  1
+#define IRLAN_ARRAY  2
+
+#define IRLAN_MAX_HEADER (TTP_HEADER+LMP_HEADER+LAP_MAX_HEADER)
+
+/*
+ *  IrLAN client
+ */
+struct irlan_client_cb {
+	int state;
+
+	int open_retries;
+
+	struct tsap_cb *tsap_ctrl;
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+	
+	int access_type;         /* Access type of provider */
+	__u8 reconnect_key[255];
+	__u8 key_len;
+	
+	__u16 recv_arb_val;
+	__u16 max_frame;
+	int filter_type;
+
+	int unicast_open;
+	int broadcast_open;
+
+	int tx_busy;
+	struct sk_buff_head txq; /* Transmit control queue */
+
+	struct iriap_cb *iriap;
+
+	struct timer_list kick_timer;
+};
+
+/*
+ * IrLAN provider
+ */
+struct irlan_provider_cb {
+	int state;
+	
+	struct tsap_cb *tsap_ctrl;
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+
+	/*
+	 *  Store some values here which are used by the provider to parse
+	 *  the filter operations
+	 */
+	int data_chan;
+	int filter_type;
+	int filter_mode;
+	int filter_operation;
+	int filter_entry;
+	int access_type;     /* Access type */
+	__u16 send_arb_val;
+
+	__u8 mac_address[6]; /* Generated MAC address for peer device */
+};
+
+/*
+ *  IrLAN control block
+ */
+struct irlan_cb {
+	int    magic;
+	struct list_head  dev_list;
+	struct net_device *dev;        /* Ethernet device structure*/
+	struct net_device_stats stats;
+
+	__u32 saddr;               /* Source device address */
+	__u32 daddr;               /* Destination device address */
+	int disconnect_reason;     /* Why we got disconnected */
+	
+	int media;                 /* Media type */
+	__u8 version[2];           /* IrLAN version */
+	
+	struct tsap_cb *tsap_data; /* Data TSAP */
+
+	int  use_udata;            /* Use Unit Data transfers */
+
+	__u8 stsap_sel_data;       /* Source data TSAP selector */
+	__u8 dtsap_sel_data;       /* Destination data TSAP selector */
+	__u8 dtsap_sel_ctrl;       /* Destination ctrl TSAP selector */
+
+	struct irlan_client_cb   client;   /* Client specific fields */
+	struct irlan_provider_cb provider; /* Provider specific fields */
+
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+	
+	wait_queue_head_t open_wait;
+	struct timer_list watchdog_timer;
+};
+
+void irlan_close(struct irlan_cb *self);
+void irlan_close_tsaps(struct irlan_cb *self);
+
+int  irlan_register_netdev(struct irlan_cb *self);
+void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel);
+void irlan_start_watchdog_timer(struct irlan_cb *self, int timeout);
+
+void irlan_open_data_tsap(struct irlan_cb *self);
+
+int irlan_run_ctrl_tx_queue(struct irlan_cb *self);
+
+struct irlan_cb *irlan_get_any(void);
+void irlan_get_provider_info(struct irlan_cb *self);
+void irlan_get_media_char(struct irlan_cb *self);
+void irlan_open_data_channel(struct irlan_cb *self);
+void irlan_close_data_channel(struct irlan_cb *self);
+void irlan_set_multicast_filter(struct irlan_cb *self, int status);
+void irlan_set_broadcast_filter(struct irlan_cb *self, int status);
+
+int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value);
+int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value);
+int irlan_insert_string_param(struct sk_buff *skb, char *param, char *value);
+int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *value, 
+			     __u16 value_len);
+
+int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len);
+
+#endif
+
+
diff --git a/include/net/irda/irlan_eth.h b/include/net/irda/irlan_eth.h
new file mode 100644
index 000000000000..9a9b3619d305
--- /dev/null
+++ b/include/net/irda/irlan_eth.h
@@ -0,0 +1,33 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_eth.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct 15 08:36:58 1998
+ * Modified at:   Fri May 14 23:29:00 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef IRLAN_ETH_H
+#define IRLAN_ETH_H
+
+struct net_device *alloc_irlandev(const char *name);
+int  irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb);
+
+void irlan_eth_flow_indication( void *instance, void *sap, LOCAL_FLOW flow);
+void irlan_eth_send_gratuitous_arp(struct net_device *dev);
+#endif
diff --git a/include/net/irda/irlan_event.h b/include/net/irda/irlan_event.h
new file mode 100644
index 000000000000..b9baac9eb8b6
--- /dev/null
+++ b/include/net/irda/irlan_event.h
@@ -0,0 +1,81 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_event.h
+ * Version:       
+ * Description:   LAN access
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Tue Feb  2 09:45:17 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_EVENT_H
+#define IRLAN_EVENT_H
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/irlan_common.h>
+
+typedef enum {
+	IRLAN_IDLE,
+	IRLAN_QUERY,
+	IRLAN_CONN, 
+	IRLAN_INFO,
+	IRLAN_MEDIA,
+	IRLAN_OPEN,
+	IRLAN_WAIT,
+	IRLAN_ARB, 
+	IRLAN_DATA,
+	IRLAN_CLOSE,
+	IRLAN_SYNC
+} IRLAN_STATE;
+
+typedef enum {
+	IRLAN_DISCOVERY_INDICATION,
+	IRLAN_IAS_PROVIDER_AVAIL,
+	IRLAN_IAS_PROVIDER_NOT_AVAIL,
+	IRLAN_LAP_DISCONNECT,
+	IRLAN_LMP_DISCONNECT,
+	IRLAN_CONNECT_COMPLETE,
+	IRLAN_DATA_INDICATION,
+	IRLAN_DATA_CONNECT_INDICATION,
+	IRLAN_RETRY_CONNECT,
+
+	IRLAN_CONNECT_INDICATION,
+	IRLAN_GET_INFO_CMD,
+	IRLAN_GET_MEDIA_CMD,
+	IRLAN_OPEN_DATA_CMD,
+	IRLAN_FILTER_CONFIG_CMD,
+
+	IRLAN_CHECK_CON_ARB,
+	IRLAN_PROVIDER_SIGNAL,
+
+	IRLAN_WATCHDOG_TIMEOUT,
+} IRLAN_EVENT;
+
+extern char *irlan_state[];
+
+void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			   struct sk_buff *skb);
+
+void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			     struct sk_buff *skb);
+
+void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state);
+void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state);
+
+#endif
diff --git a/include/net/irda/irlan_filter.h b/include/net/irda/irlan_filter.h
new file mode 100644
index 000000000000..3afeb6c94ea4
--- /dev/null
+++ b/include/net/irda/irlan_filter.h
@@ -0,0 +1,33 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_filter.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Fri Jan 29 15:24:08 1999
+ * Modified at:   Sun Feb  7 23:35:31 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef IRLAN_FILTER_H
+#define IRLAN_FILTER_H
+
+void irlan_check_command_param(struct irlan_cb *self, char *param, 
+			       char *value);
+void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb);
+int irlan_print_filter(struct seq_file *seq, int filter_type);
+
+#endif /* IRLAN_FILTER_H */
diff --git a/include/net/irda/irlan_provider.h b/include/net/irda/irlan_provider.h
new file mode 100644
index 000000000000..ca51d5b7c999
--- /dev/null
+++ b/include/net/irda/irlan_provider.h
@@ -0,0 +1,52 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_provider.h
+ * Version:       0.1
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun May  9 12:26:11 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_SERVER_H
+#define IRLAN_SERVER_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irlan_common.h>
+
+void irlan_provider_ctrl_disconnect_indication(void *instance, void *sap, 
+					       LM_REASON reason, 
+					       struct sk_buff *skb);
+
+
+void irlan_provider_connect_response(struct irlan_cb *, struct tsap_cb *);
+
+int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb);
+int irlan_provider_parse_command(struct irlan_cb *self, int cmd,
+				 struct sk_buff *skb);
+
+void irlan_provider_send_reply(struct irlan_cb *self, int command, 
+			       int ret_code);
+int irlan_provider_open_ctrl_tsap(struct irlan_cb *self);
+
+#endif
+
+
diff --git a/include/net/irda/irlap.h b/include/net/irda/irlap.h
new file mode 100644
index 000000000000..f55e86e75030
--- /dev/null
+++ b/include/net/irda/irlap.h
@@ -0,0 +1,290 @@
+/*********************************************************************
+ *                
+ * Filename:      irlap.h
+ * Version:       0.8
+ * Description:   An IrDA LAP driver for Linux
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Fri Dec 10 13:21:17 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAP_H
+#define IRLAP_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/discovery.h>		/* discovery_t */
+#include <net/irda/irlap_event.h>	/* IRLAP_STATE, ... */
+#include <net/irda/irmod.h>		/* struct notify_t */
+
+#define CONFIG_IRDA_DYNAMIC_WINDOW 1
+
+#define LAP_RELIABLE   1
+#define LAP_UNRELIABLE 0
+
+#define LAP_ADDR_HEADER 1  /* IrLAP Address Header */
+#define LAP_CTRL_HEADER 1  /* IrLAP Control Header */
+
+/* May be different when we get VFIR */
+#define LAP_MAX_HEADER (LAP_ADDR_HEADER + LAP_CTRL_HEADER)
+
+#define BROADCAST  0xffffffff /* Broadcast device address */
+#define CBROADCAST 0xfe       /* Connection broadcast address */
+#define XID_FORMAT 0x01       /* Discovery XID format */
+
+/* Nobody seems to use this constant. */
+#define LAP_WINDOW_SIZE 8
+/* We keep the LAP queue very small to minimise the amount of buffering.
+ * this improve latency and reduce resource consumption.
+ * This work only because we have synchronous refilling of IrLAP through
+ * the flow control mechanism (via scheduler and IrTTP).
+ * 2 buffers is the minimum we can work with, one that we send while polling
+ * IrTTP, and another to know that we should not send the pf bit.
+ * Jean II */
+#define LAP_HIGH_THRESHOLD     2
+/* Some rare non TTP clients don't implement flow control, and
+ * so don't comply with the above limit (and neither with this one).
+ * For IAP and management, it doesn't matter, because they never transmit much.
+ *.For IrLPT, this should be fixed.
+ * - Jean II */
+#define LAP_MAX_QUEUE 10
+/* Please note that all IrDA management frames (LMP/TTP conn req/disc and
+ * IAS queries) fall in the second category and are sent to LAP even if TTP
+ * is stopped. This means that those frames will wait only a maximum of
+ * two (2) data frames before beeing sent on the "wire", which speed up
+ * new socket setup when the link is saturated.
+ * Same story for two sockets competing for the medium : if one saturates
+ * the LAP, when the other want to transmit it only has to wait for
+ * maximum three (3) packets (2 + one scheduling), which improve performance
+ * of delay sensitive applications.
+ * Jean II */
+
+#define NR_EXPECTED     1
+#define NR_UNEXPECTED   0
+#define NR_INVALID     -1
+
+#define NS_EXPECTED     1
+#define NS_UNEXPECTED   0
+#define NS_INVALID     -1
+
+/*
+ *  Meta information passed within the IrLAP state machine
+ */
+struct irlap_info {
+	__u8 caddr;   /* Connection address */
+	__u8 control; /* Frame type */
+        __u8 cmd;
+
+	__u32 saddr;
+	__u32 daddr;
+	
+	int pf;        /* Poll/final bit set */
+
+	__u8  nr;      /* Sequence number of next frame expected */
+	__u8  ns;      /* Sequence number of frame sent */
+
+	int  S;        /* Number of slots */
+	int  slot;     /* Random chosen slot */
+	int  s;        /* Current slot */
+
+	discovery_t *discovery; /* Discovery information */
+};
+
+/* Main structure of IrLAP */
+struct irlap_cb {
+	irda_queue_t q;     /* Must be first */
+	magic_t magic;
+
+	/* Device we are attached to */
+	struct net_device  *netdev;
+	char		hw_name[2*IFNAMSIZ + 1];
+
+	/* Connection state */
+	volatile IRLAP_STATE state;       /* Current state */
+
+	/* Timers used by IrLAP */
+	struct timer_list query_timer;
+	struct timer_list slot_timer;
+	struct timer_list discovery_timer;
+	struct timer_list final_timer;
+	struct timer_list poll_timer;
+	struct timer_list wd_timer;
+	struct timer_list backoff_timer;
+
+	/* Media busy stuff */
+	struct timer_list media_busy_timer;
+	int media_busy;
+
+	/* Timeouts which will be different with different turn time */
+	int slot_timeout;
+	int poll_timeout;
+	int final_timeout;
+	int wd_timeout;
+
+	struct sk_buff_head txq;  /* Frames to be transmitted */
+	struct sk_buff_head txq_ultra;
+
+ 	__u8    caddr;        /* Connection address */
+	__u32   saddr;        /* Source device address */
+	__u32   daddr;        /* Destination device address */
+
+	int     retry_count;  /* Times tried to establish connection */
+	int     add_wait;     /* True if we are waiting for frame */
+
+	__u8    connect_pending;
+	__u8    disconnect_pending;
+
+	/*  To send a faster RR if tx queue empty */
+#ifdef CONFIG_IRDA_FAST_RR
+	int     fast_RR_timeout;
+	int     fast_RR;      
+#endif /* CONFIG_IRDA_FAST_RR */
+	
+	int N1; /* N1 * F-timer = Negitiated link disconnect warning threshold */
+	int N2; /* N2 * F-timer = Negitiated link disconnect time */
+	int N3; /* Connection retry count */
+
+	int     local_busy;
+	int     remote_busy;
+	int     xmitflag;
+
+	__u8    vs;            /* Next frame to be sent */
+	__u8    vr;            /* Next frame to be received */
+	__u8    va;            /* Last frame acked */
+ 	int     window;        /* Nr of I-frames allowed to send */
+	int     window_size;   /* Current negotiated window size */
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	__u32   line_capacity; /* Number of bytes allowed to send */
+	__u32   bytes_left;    /* Number of bytes still allowed to transmit */
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+	struct sk_buff_head wx_list;
+
+	__u8    ack_required;
+	
+	/* XID parameters */
+ 	__u8    S;           /* Number of slots */
+	__u8    slot;        /* Random chosen slot */
+ 	__u8    s;           /* Current slot */
+	int     frame_sent;  /* Have we sent reply? */
+
+	hashbin_t   *discovery_log;
+ 	discovery_t *discovery_cmd;
+
+	__u32 speed;		/* Link speed */
+
+	struct qos_info  qos_tx;   /* QoS requested by peer */
+	struct qos_info  qos_rx;   /* QoS requested by self */
+	struct qos_info *qos_dev;  /* QoS supported by device */
+
+	notify_t notify; /* Callbacks to IrLMP */
+
+	int    mtt_required;  /* Minumum turnaround time required */
+	int    xbofs_delay;   /* Nr of XBOF's used to MTT */
+	int    bofs_count;    /* Negotiated extra BOFs */
+	int    next_bofs;     /* Negotiated extra BOFs after next frame */
+};
+
+/* 
+ *  Function prototypes 
+ */
+int irlap_init(void);
+void irlap_cleanup(void);
+
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+			    const char *hw_name);
+void irlap_close(struct irlap_cb *self);
+
+void irlap_connect_request(struct irlap_cb *self, __u32 daddr, 
+			   struct qos_info *qos, int sniff);
+void irlap_connect_response(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_connect_confirm(struct irlap_cb *, struct sk_buff *skb);
+
+void irlap_data_indication(struct irlap_cb *, struct sk_buff *, int unreliable);
+void irlap_data_request(struct irlap_cb *, struct sk_buff *, int unreliable);
+
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_request(struct irlap_cb *, struct sk_buff *);
+void irlap_unitdata_indication(struct irlap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlap_disconnect_request(struct irlap_cb *);
+void irlap_disconnect_indication(struct irlap_cb *, LAP_REASON reason);
+
+void irlap_status_indication(struct irlap_cb *, int quality_of_link);
+
+void irlap_test_request(__u8 *info, int len);
+
+void irlap_discovery_request(struct irlap_cb *, discovery_t *discovery);
+void irlap_discovery_confirm(struct irlap_cb *, hashbin_t *discovery_log);
+void irlap_discovery_indication(struct irlap_cb *, discovery_t *discovery);
+
+void irlap_reset_indication(struct irlap_cb *self);
+void irlap_reset_confirm(void);
+
+void irlap_update_nr_received(struct irlap_cb *, int nr);
+int irlap_validate_nr_received(struct irlap_cb *, int nr);
+int irlap_validate_ns_received(struct irlap_cb *, int ns);
+
+int  irlap_generate_rand_time_slot(int S, int s);
+void irlap_initiate_connection_state(struct irlap_cb *);
+void irlap_flush_all_queues(struct irlap_cb *);
+void irlap_wait_min_turn_around(struct irlap_cb *, struct qos_info *);
+
+void irlap_apply_default_connection_parameters(struct irlap_cb *self);
+void irlap_apply_connection_parameters(struct irlap_cb *self, int now);
+
+#define IRLAP_GET_HEADER_SIZE(self) (LAP_MAX_HEADER)
+#define IRLAP_GET_TX_QUEUE_LEN(self) skb_queue_len(&self->txq)
+
+/* Return TRUE if the node is in primary mode (i.e. master)
+ * - Jean II */
+static inline int irlap_is_primary(struct irlap_cb *self)
+{
+	int ret;
+	switch(self->state) {
+	case LAP_XMIT_P:
+	case LAP_NRM_P:
+		ret = 1;
+		break;
+	case LAP_XMIT_S:
+	case LAP_NRM_S:
+		ret = 0;
+		break;
+	default:
+		ret = -1;
+	}
+	return(ret);
+}
+
+/* Clear a pending IrLAP disconnect. - Jean II */
+static inline void irlap_clear_disconnect(struct irlap_cb *self)
+{
+	self->disconnect_pending = FALSE;
+}
+
+#endif
diff --git a/include/net/irda/irlap_event.h b/include/net/irda/irlap_event.h
new file mode 100644
index 000000000000..2ae2e119ef4b
--- /dev/null
+++ b/include/net/irda/irlap_event.h
@@ -0,0 +1,131 @@
+/*********************************************************************
+ *                
+ *                
+ * Filename:      irlap_event.h
+ * Version:       0.1
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Tue Dec 21 11:20:30 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRLAP_EVENT_H
+#define IRLAP_EVENT_H
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+struct irlap_info;
+
+/* IrLAP States */
+typedef enum {
+	LAP_NDM,         /* Normal disconnected mode */
+	LAP_QUERY,
+	LAP_REPLY,
+	LAP_CONN,        /* Connect indication */
+	LAP_SETUP,       /* Setting up connection */
+	LAP_OFFLINE,     /* A really boring state */
+	LAP_XMIT_P,
+	LAP_PCLOSE,
+	LAP_NRM_P,       /* Normal response mode as primary */
+	LAP_RESET_WAIT,
+	LAP_RESET,
+	LAP_NRM_S,       /* Normal response mode as secondary */
+	LAP_XMIT_S,
+	LAP_SCLOSE,
+	LAP_RESET_CHECK,
+} IRLAP_STATE;
+
+/* IrLAP Events */
+typedef enum {
+	/* Services events */
+	DISCOVERY_REQUEST,
+	CONNECT_REQUEST,
+	CONNECT_RESPONSE,
+	DISCONNECT_REQUEST,
+	DATA_REQUEST,
+	RESET_REQUEST,
+	RESET_RESPONSE,
+
+	/* Send events */
+	SEND_I_CMD,
+	SEND_UI_FRAME,
+
+	/* Receive events */
+	RECV_DISCOVERY_XID_CMD,
+	RECV_DISCOVERY_XID_RSP,
+	RECV_SNRM_CMD,
+	RECV_TEST_CMD,
+	RECV_TEST_RSP,
+	RECV_UA_RSP,
+	RECV_DM_RSP,
+	RECV_RD_RSP,
+	RECV_I_CMD,
+	RECV_I_RSP,
+	RECV_UI_FRAME,
+	RECV_FRMR_RSP,
+	RECV_RR_CMD,
+	RECV_RR_RSP,
+	RECV_RNR_CMD,
+	RECV_RNR_RSP,
+	RECV_REJ_CMD,
+	RECV_REJ_RSP,
+	RECV_SREJ_CMD,
+	RECV_SREJ_RSP,
+	RECV_DISC_CMD,
+
+	/* Timer events */
+	SLOT_TIMER_EXPIRED,
+	QUERY_TIMER_EXPIRED,
+	FINAL_TIMER_EXPIRED,
+	POLL_TIMER_EXPIRED,
+	DISCOVERY_TIMER_EXPIRED,
+	WD_TIMER_EXPIRED,
+	BACKOFF_TIMER_EXPIRED,
+	MEDIA_BUSY_TIMER_EXPIRED,
+} IRLAP_EVENT;
+
+/*
+ * Disconnect reason code
+ */
+typedef enum { /* FIXME check the two first reason codes */
+	LAP_DISC_INDICATION=1, /* Received a disconnect request from peer */
+	LAP_NO_RESPONSE,       /* To many retransmits without response */
+	LAP_RESET_INDICATION,  /* To many retransmits, or invalid nr/ns */
+	LAP_FOUND_NONE,        /* No devices were discovered */
+	LAP_MEDIA_BUSY,
+	LAP_PRIMARY_CONFLICT,
+} LAP_REASON;
+
+extern const char *irlap_state[];
+
+void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event, 
+		    struct sk_buff *skb, struct irlap_info *info);
+void irlap_print_event(IRLAP_EVENT event);
+
+extern int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb);
+
+#endif
diff --git a/include/net/irda/irlap_frame.h b/include/net/irda/irlap_frame.h
new file mode 100644
index 000000000000..3452ae257c84
--- /dev/null
+++ b/include/net/irda/irlap_frame.h
@@ -0,0 +1,142 @@
+/*********************************************************************
+ *                
+ * Filename:      irlap_frame.h
+ * Version:       0.9
+ * Description:   IrLAP frame declarations
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 10:27:26 1997
+ * Modified at:   Sat Dec 25 21:07:26 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997-1999 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRLAP_FRAME_H
+#define IRLAP_FRAME_H
+
+#include <linux/skbuff.h>
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+struct discovery_t;
+
+/* Frame types and templates */
+#define INVALID   0xff
+
+/* Unnumbered (U) commands */
+#define SNRM_CMD  0x83 /* Set Normal Response Mode */
+#define DISC_CMD  0x43 /* Disconnect */
+#define XID_CMD   0x2f /* Exchange Station Identification */
+#define TEST_CMD  0xe3 /* Test */
+
+/* Unnumbered responses */
+#define RNRM_RSP  0x83 /* Request Normal Response Mode */
+#define UA_RSP    0x63 /* Unnumbered Acknowledgement */
+#define FRMR_RSP  0x87 /* Frame Reject */
+#define DM_RSP    0x0f /* Disconnect Mode */
+#define RD_RSP    0x43 /* Request Disconnection */
+#define XID_RSP   0xaf /* Exchange Station Identification */
+#define TEST_RSP  0xe3 /* Test frame */
+
+/* Supervisory (S) */
+#define RR        0x01 /* Receive Ready */
+#define REJ       0x09 /* Reject */
+#define RNR       0x05 /* Receive Not Ready */
+#define SREJ      0x0d /* Selective Reject */
+
+/* Information (I) */
+#define I_FRAME   0x00 /* Information Format */
+#define UI_FRAME  0x03 /* Unnumbered Information */
+
+#define CMD_FRAME 0x01
+#define RSP_FRAME 0x00
+
+#define PF_BIT    0x10 /* Poll/final bit */
+
+struct xid_frame {
+	__u8  caddr; /* Connection address */
+	__u8  control;
+	__u8  ident; /* Should always be XID_FORMAT */ 
+	__u32 saddr; /* Source device address */
+	__u32 daddr; /* Destination device address */
+	__u8  flags; /* Discovery flags */
+	__u8  slotnr;
+	__u8  version;
+} IRDA_PACK;
+
+struct test_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+	__u32 saddr;         /* Source device address */
+	__u32 daddr;         /* Destination device address */
+} IRDA_PACK;
+
+struct ua_frame {
+	__u8 caddr;
+	__u8 control;
+
+	__u32 saddr; /* Source device address */
+	__u32 daddr; /* Dest device address */
+} IRDA_PACK;
+	
+struct i_frame {
+	__u8 caddr;
+	__u8 control;
+} IRDA_PACK;
+
+struct snrm_frame {
+	__u8  caddr;
+	__u8  control;
+	__u32 saddr;
+	__u32 daddr;
+	__u8  ncaddr;
+} IRDA_PACK;
+
+void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_send_discovery_xid_frame(struct irlap_cb *, int S, __u8 s, 
+				    __u8 command,
+				    struct discovery_t *discovery);
+void irlap_send_snrm_frame(struct irlap_cb *, struct qos_info *);
+void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr, 
+			   struct sk_buff *cmd);
+void irlap_send_ua_response_frame(struct irlap_cb *, struct qos_info *);
+void irlap_send_dm_frame(struct irlap_cb *self);
+void irlap_send_rd_frame(struct irlap_cb *self);
+void irlap_send_disc_frame(struct irlap_cb *self);
+void irlap_send_rr_frame(struct irlap_cb *self, int command);
+
+void irlap_send_data_primary(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_primary_poll(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_secondary(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_secondary_final(struct irlap_cb *, struct sk_buff *);
+void irlap_resend_rejected_frames(struct irlap_cb *, int command);
+void irlap_resend_rejected_frame(struct irlap_cb *self, int command);
+
+void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+			 __u8 caddr, int command);
+
+extern int irlap_insert_qos_negotiation_params(struct irlap_cb *self, 
+					       struct sk_buff *skb);
+
+#endif
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
new file mode 100644
index 000000000000..86aefb1fda5e
--- /dev/null
+++ b/include/net/irda/irlmp.h
@@ -0,0 +1,295 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp.h
+ * Version:       0.9
+ * Description:   IrDA Link Management Protocol (LMP) layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 17 20:54:32 1997
+ * Modified at:   Fri Dec 10 13:23:01 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLMP_H
+#define IRLMP_H
+
+#include <asm/param.h>  /* for HZ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>		/* LAP_MAX_HEADER, ... */
+#include <net/irda/irlmp_event.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/discovery.h>
+
+/* LSAP-SEL's */
+#define LSAP_MASK     0x7f
+#define LSAP_IAS      0x00
+#define LSAP_ANY      0xff
+#define LSAP_MAX      0x6f /* 0x70-0x7f are reserved */
+#define LSAP_CONNLESS 0x70 /* Connectionless LSAP, mostly used for Ultra */
+
+#define DEV_ADDR_ANY  0xffffffff
+
+#define LMP_HEADER          2    /* Dest LSAP + Source LSAP */
+#define LMP_CONTROL_HEADER  4
+#define LMP_PID_HEADER      1    /* Used by Ultra */
+#define LMP_MAX_HEADER      (LMP_CONTROL_HEADER+LAP_MAX_HEADER)
+
+#define LM_MAX_CONNECTIONS  10
+
+#define LM_IDLE_TIMEOUT     2*HZ /* 2 seconds for now */
+
+typedef enum {
+	S_PNP = 0,
+	S_PDA,
+	S_COMPUTER,
+	S_PRINTER,
+	S_MODEM,
+	S_FAX,
+	S_LAN,
+	S_TELEPHONY,
+	S_COMM,
+	S_OBEX,
+	S_ANY,
+	S_END,
+} SERVICE;
+
+/* For selective discovery */
+typedef void (*DISCOVERY_CALLBACK1) (discinfo_t *, DISCOVERY_MODE, void *);
+/* For expiry (the same) */
+typedef void (*DISCOVERY_CALLBACK2) (discinfo_t *, DISCOVERY_MODE, void *);
+
+typedef struct {
+	irda_queue_t queue; /* Must be first */
+
+	__u16_host_order hints; /* Hint bits */
+} irlmp_service_t;
+
+typedef struct {
+	irda_queue_t queue; /* Must be first */
+
+	__u16_host_order hint_mask;
+
+	DISCOVERY_CALLBACK1 disco_callback;	/* Selective discovery */
+	DISCOVERY_CALLBACK2 expir_callback;	/* Selective expiration */
+	void *priv;                /* Used to identify client */
+} irlmp_client_t;
+
+/*
+ *  Information about each logical LSAP connection
+ */
+struct lsap_cb {
+	irda_queue_t queue;      /* Must be first */
+	magic_t magic;
+
+	unsigned long connected;	/* set_bit used on this */
+	int  persistent;
+
+	__u8 slsap_sel;   /* Source (this) LSAP address */
+	__u8 dlsap_sel;   /* Destination LSAP address (if connected) */
+#ifdef CONFIG_IRDA_ULTRA
+	__u8 pid;         /* Used by connectionless LSAP */
+#endif /* CONFIG_IRDA_ULTRA */
+	struct sk_buff *conn_skb; /* Store skb here while connecting */
+
+	struct timer_list watchdog_timer;
+
+	IRLMP_STATE     lsap_state;  /* Connection state */
+	notify_t        notify;      /* Indication/Confirm entry points */
+	struct qos_info qos;         /* QoS for this connection */
+
+	struct lap_cb *lap; /* Pointer to LAP connection structure */
+};
+
+/*
+ *  Used for caching the last slsap->dlsap->handle mapping
+ *
+ * We don't need to keep/match the remote address in the cache because
+ * we are associated with a specific LAP (which implies it).
+ * Jean II
+ */
+typedef struct {
+	int valid;
+
+	__u8 slsap_sel;
+	__u8 dlsap_sel;
+	struct lsap_cb *lsap;
+} CACHE_ENTRY;
+
+/*
+ *  Information about each registred IrLAP layer
+ */
+struct lap_cb {
+	irda_queue_t queue; /* Must be first */
+	magic_t magic;
+
+	int reason;    /* LAP disconnect reason */
+
+	IRLMP_STATE lap_state;
+
+	struct irlap_cb *irlap;   /* Instance of IrLAP layer */
+	hashbin_t *lsaps;         /* LSAP associated with this link */
+	struct lsap_cb *flow_next;	/* Next lsap to be polled for Tx */
+
+	__u8  caddr;  /* Connection address */
+ 	__u32 saddr;  /* Source device address */
+ 	__u32 daddr;  /* Destination device address */
+	
+	struct qos_info *qos;  /* LAP QoS for this session */
+	struct timer_list idle_timer;
+	
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	/* The lsap cache was moved from struct irlmp_cb to here because
+	 * it must be associated with the specific LAP. Also, this
+	 * improves performance. - Jean II */
+	CACHE_ENTRY cache;  /* Caching last slsap->dlsap->handle mapping */
+#endif
+};
+
+/*
+ *  Main structure for IrLMP
+ */
+struct irlmp_cb {
+	magic_t magic;
+
+	__u8 conflict_flag;
+	
+	discovery_t discovery_cmd; /* Discovery command to use by IrLAP */
+	discovery_t discovery_rsp; /* Discovery response to use by IrLAP */
+
+	/* Last lsap picked automatically by irlmp_find_free_slsap() */
+	int	last_lsap_sel;
+
+	struct timer_list discovery_timer;
+
+ 	hashbin_t *links;         /* IrLAP connection table */
+	hashbin_t *unconnected_lsaps;
+ 	hashbin_t *clients;
+	hashbin_t *services;
+
+	hashbin_t *cachelog;	/* Current discovery log */
+
+	int running;
+
+	__u16_host_order hints; /* Hint bits */
+};
+
+/* Prototype declarations */
+int  irlmp_init(void);
+void irlmp_cleanup(void);
+struct lsap_cb *irlmp_open_lsap(__u8 slsap, notify_t *notify, __u8 pid);
+void irlmp_close_lsap( struct lsap_cb *self);
+
+__u16 irlmp_service_to_hint(int service);
+void *irlmp_register_service(__u16 hints);
+int irlmp_unregister_service(void *handle);
+void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb,
+			    DISCOVERY_CALLBACK2 expir_clb, void *priv);
+int irlmp_unregister_client(void *handle);
+int irlmp_update_client(void *handle, __u16 hint_mask, 
+			DISCOVERY_CALLBACK1 disco_clb,
+			DISCOVERY_CALLBACK2 expir_clb, void *priv);
+
+void irlmp_register_link(struct irlap_cb *, __u32 saddr, notify_t *);
+void irlmp_unregister_link(__u32 saddr);
+
+int  irlmp_connect_request(struct lsap_cb *, __u8 dlsap_sel, 
+			   __u32 saddr, __u32 daddr,
+			   struct qos_info *, struct sk_buff *);
+void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb);
+int  irlmp_connect_response(struct lsap_cb *, struct sk_buff *);
+void irlmp_connect_confirm(struct lsap_cb *, struct sk_buff *);
+struct lsap_cb *irlmp_dup(struct lsap_cb *self, void *instance);
+
+void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason, 
+				 struct sk_buff *userdata);
+int  irlmp_disconnect_request(struct lsap_cb *, struct sk_buff *userdata);
+
+void irlmp_discovery_confirm(hashbin_t *discovery_log, DISCOVERY_MODE mode);
+void irlmp_discovery_request(int nslots);
+discinfo_t *irlmp_get_discoveries(int *pn, __u16 mask, int nslots);
+void irlmp_do_expiry(void);
+void irlmp_do_discovery(int nslots);
+discovery_t *irlmp_get_discovery_response(void);
+void irlmp_discovery_expiry(discinfo_t *expiry, int number);
+
+int  irlmp_data_request(struct lsap_cb *, struct sk_buff *);
+void irlmp_data_indication(struct lsap_cb *, struct sk_buff *);
+
+int  irlmp_udata_request(struct lsap_cb *, struct sk_buff *);
+void irlmp_udata_indication(struct lsap_cb *, struct sk_buff *);
+
+#ifdef CONFIG_IRDA_ULTRA
+int  irlmp_connless_data_request(struct lsap_cb *, struct sk_buff *, __u8);
+void irlmp_connless_data_indication(struct lsap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlmp_status_indication(struct lap_cb *, LINK_STATUS link, LOCK_STATUS lock);
+void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow);
+
+LM_REASON irlmp_convert_lap_reason(LAP_REASON);
+
+static inline __u32 irlmp_get_saddr(const struct lsap_cb *self)
+{
+	return (self && self->lap) ? self->lap->saddr : 0;
+}
+
+static inline __u32 irlmp_get_daddr(const struct lsap_cb *self)
+{
+	return (self && self->lap) ? self->lap->daddr : 0;
+}
+
+extern const char *irlmp_reasons[];
+extern int sysctl_discovery_timeout;
+extern int sysctl_discovery_slots;
+extern int sysctl_discovery;
+extern int sysctl_lap_keepalive_time;	/* in ms, default is LM_IDLE_TIMEOUT */
+extern struct irlmp_cb *irlmp;
+
+/* Check if LAP queue is full.
+ * Used by IrTTP for low control, see comments in irlap.h - Jean II */
+static inline int irlmp_lap_tx_queue_full(struct lsap_cb *self)
+{
+	if (self == NULL)
+		return 0;
+	if (self->lap == NULL)
+		return 0;
+	if (self->lap->irlap == NULL)
+		return 0;
+
+	return(IRLAP_GET_TX_QUEUE_LEN(self->lap->irlap) >= LAP_HIGH_THRESHOLD);
+}
+
+/* After doing a irlmp_dup(), this get one of the two socket back into
+ * a state where it's waiting incomming connections.
+ * Note : this can be used *only* if the socket is not yet connected
+ * (i.e. NO irlmp_connect_response() done on this socket).
+ * - Jean II */
+static inline void irlmp_listen(struct lsap_cb *self)
+{
+	self->dlsap_sel = LSAP_ANY;
+	self->lap = NULL;
+	self->lsap_state = LSAP_DISCONNECTED;
+	/* Started when we received the LM_CONNECT_INDICATION */
+	del_timer(&self->watchdog_timer);
+}
+
+#endif
diff --git a/include/net/irda/irlmp_event.h b/include/net/irda/irlmp_event.h
new file mode 100644
index 000000000000..03c6f81a502a
--- /dev/null
+++ b/include/net/irda/irlmp_event.h
@@ -0,0 +1,98 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp_event.h
+ * Version:       0.1
+ * Description:   IrDA-LMP event handling
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Thu Jul  8 12:18:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLMP_EVENT_H
+#define IRLMP_EVENT_H
+
+/* A few forward declarations (to make compiler happy) */
+struct irlmp_cb;
+struct lsap_cb;
+struct lap_cb;
+struct discovery_t;
+
+/* LAP states */
+typedef enum {
+	/* IrLAP connection control states */
+	LAP_STANDBY,             /* No LAP connection */
+	LAP_U_CONNECT,           /* Starting LAP connection */
+	LAP_ACTIVE,              /* LAP connection is active */
+} IRLMP_STATE;
+
+/* LSAP connection control states */
+typedef enum {
+	LSAP_DISCONNECTED,        /* No LSAP connection */
+	LSAP_CONNECT,             /* Connect indication from peer */
+	LSAP_CONNECT_PEND,        /* Connect request from service user */
+	LSAP_DATA_TRANSFER_READY, /* LSAP connection established */          
+	LSAP_SETUP,               /* Trying to set up LSAP connection */
+	LSAP_SETUP_PEND,          /* Request to start LAP connection */
+} LSAP_STATE;
+
+typedef enum {
+	/* LSAP events */
+ 	LM_CONNECT_REQUEST,
+ 	LM_CONNECT_CONFIRM,
+	LM_CONNECT_RESPONSE,
+ 	LM_CONNECT_INDICATION, 	
+	
+	LM_DISCONNECT_INDICATION,
+	LM_DISCONNECT_REQUEST,
+
+ 	LM_DATA_REQUEST,
+	LM_UDATA_REQUEST,
+ 	LM_DATA_INDICATION,
+	LM_UDATA_INDICATION,
+
+	LM_WATCHDOG_TIMEOUT,
+
+	/* IrLAP events */
+	LM_LAP_CONNECT_REQUEST,
+ 	LM_LAP_CONNECT_INDICATION, 
+ 	LM_LAP_CONNECT_CONFIRM,
+ 	LM_LAP_DISCONNECT_INDICATION, 
+	LM_LAP_DISCONNECT_REQUEST,
+	LM_LAP_DISCOVERY_REQUEST,
+ 	LM_LAP_DISCOVERY_CONFIRM,
+	LM_LAP_IDLE_TIMEOUT,
+} IRLMP_EVENT;
+
+extern const char *irlmp_state[];
+extern const char *irlsap_state[];
+
+void irlmp_watchdog_timer_expired(void *data);
+void irlmp_discovery_timer_expired(void *data);
+void irlmp_idle_timer_expired(void *data);
+
+void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event, 
+			struct sk_buff *skb);
+int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event, 
+			struct sk_buff *skb);
+
+#endif /* IRLMP_EVENT_H */
+
+
+
+
diff --git a/include/net/irda/irlmp_frame.h b/include/net/irda/irlmp_frame.h
new file mode 100644
index 000000000000..eb3ad158c023
--- /dev/null
+++ b/include/net/irda/irlmp_frame.h
@@ -0,0 +1,63 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp_frame.h
+ * Version:       0.9
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 02:09:59 1997
+ * Modified at:   Fri Dec 10 13:21:53 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRMLP_FRAME_H
+#define IRMLP_FRAME_H
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/discovery.h>
+
+/* IrLMP frame opcodes */
+#define CONNECT_CMD    0x01
+#define CONNECT_CNF    0x81
+#define DISCONNECT     0x02
+#define ACCESSMODE_CMD 0x03
+#define ACCESSMODE_CNF 0x83
+
+#define CONTROL_BIT    0x80
+
+void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+				int expedited, struct sk_buff *skb);
+void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, 
+			__u8 opcode, struct sk_buff *skb);
+void irlmp_link_data_indication(struct lap_cb *, struct sk_buff *, 
+				int unreliable);
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_link_unitdata_indication(struct lap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlmp_link_connect_indication(struct lap_cb *, __u32 saddr, __u32 daddr,
+				   struct qos_info *qos, struct sk_buff *skb);
+void irlmp_link_connect_request(__u32 daddr);
+void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos, 
+				struct sk_buff *skb);
+void irlmp_link_disconnect_indication(struct lap_cb *, struct irlap_cb *, 
+				      LAP_REASON reason, struct sk_buff *); 
+void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log);
+void irlmp_link_discovery_indication(struct lap_cb *, discovery_t *discovery);
+
+#endif
diff --git a/include/net/irda/irmod.h b/include/net/irda/irmod.h
new file mode 100644
index 000000000000..72b446c1e22c
--- /dev/null
+++ b/include/net/irda/irmod.h
@@ -0,0 +1,109 @@
+/*********************************************************************
+ *                
+ * Filename:      irmod.h
+ * Version:       0.3
+ * Description:   IrDA module and utilities functions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Dec 15 13:58:52 1997
+ * Modified at:   Fri Jan 28 13:15:24 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charg.
+ *     
+ ********************************************************************/
+
+#ifndef IRMOD_H
+#define IRMOD_H
+
+/* Misc status information */
+typedef enum {
+	STATUS_OK,
+	STATUS_ABORTED,
+	STATUS_NO_ACTIVITY,
+	STATUS_NOISY,
+	STATUS_REMOTE,
+} LINK_STATUS;
+
+typedef enum {
+	LOCK_NO_CHANGE,
+	LOCK_LOCKED,
+	LOCK_UNLOCKED,
+} LOCK_STATUS;
+
+typedef enum { FLOW_STOP, FLOW_START } LOCAL_FLOW;
+
+/*  
+ *  IrLMP disconnect reasons. The order is very important, since they 
+ *  correspond to disconnect reasons sent in IrLMP disconnect frames, so
+ *  please do not touch :-)
+ */
+typedef enum {
+	LM_USER_REQUEST = 1,  /* User request */
+	LM_LAP_DISCONNECT,    /* Unexpected IrLAP disconnect */
+	LM_CONNECT_FAILURE,   /* Failed to establish IrLAP connection */
+	LM_LAP_RESET,         /* IrLAP reset */
+	LM_INIT_DISCONNECT,   /* Link Management initiated disconnect */
+	LM_LSAP_NOTCONN,      /* Data delivered on unconnected LSAP */
+	LM_NON_RESP_CLIENT,   /* Non responsive LM-MUX client */
+	LM_NO_AVAIL_CLIENT,   /* No available LM-MUX client */
+	LM_CONN_HALF_OPEN,    /* Connection is half open */
+	LM_BAD_SOURCE_ADDR,   /* Illegal source address (i.e 0x00) */
+} LM_REASON;
+#define LM_UNKNOWN 0xff       /* Unspecified disconnect reason */
+
+/* A few forward declarations (to make compiler happy) */
+struct qos_info;		/* in <net/irda/qos.h> */
+
+/*
+ *  Notify structure used between transport and link management layers
+ */
+typedef struct {
+	int (*data_indication)(void *priv, void *sap, struct sk_buff *skb);
+	int (*udata_indication)(void *priv, void *sap, struct sk_buff *skb);
+	void (*connect_confirm)(void *instance, void *sap, 
+				struct qos_info *qos, __u32 max_sdu_size,
+				__u8 max_header_size, struct sk_buff *skb);
+	void (*connect_indication)(void *instance, void *sap, 
+				   struct qos_info *qos, __u32 max_sdu_size, 
+				   __u8 max_header_size, struct sk_buff *skb);
+	void (*disconnect_indication)(void *instance, void *sap, 
+				      LM_REASON reason, struct sk_buff *);
+	void (*flow_indication)(void *instance, void *sap, LOCAL_FLOW flow);
+	void (*status_indication)(void *instance,
+				  LINK_STATUS link, LOCK_STATUS lock);
+	void *instance; /* Layer instance pointer */
+	char name[16];  /* Name of layer */
+} notify_t;
+
+#define NOTIFY_MAX_NAME 16
+
+/* Zero the notify structure */
+void irda_notify_init(notify_t *notify);
+
+/* Locking wrapper - Note the inverted logic on irda_lock().
+ * Those function basically return false if the lock is already in the
+ * position you want to set it. - Jean II */
+#define irda_lock(lock)		(! test_and_set_bit(0, (void *) (lock)))
+#define irda_unlock(lock)	(test_and_clear_bit(0, (void *) (lock)))
+
+#endif /* IRMOD_H */
+
+
+
+
+
+
+
+
+
diff --git a/include/net/irda/irqueue.h b/include/net/irda/irqueue.h
new file mode 100644
index 000000000000..335b0ace9665
--- /dev/null
+++ b/include/net/irda/irqueue.h
@@ -0,0 +1,96 @@
+/*********************************************************************
+ *                
+ * Filename:      irqueue.h
+ * Version:       0.3
+ * Description:   General queue implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Jun  9 13:26:50 1998
+ * Modified at:   Thu Oct  7 13:25:16 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no>
+ *     Copyright (c) 1998, Dag Brattli
+ *     All Rights Reserved.
+ *      
+ *     This code is taken from the Vortex Operating System written by Aage
+ *     Kvalnes and has been ported to Linux and Linux/IR by Dag Brattli
+ *
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#ifndef IRDA_QUEUE_H
+#define IRDA_QUEUE_H
+
+#define NAME_SIZE      32
+
+/*
+ * Hash types (some flags can be xored)
+ * See comments in irqueue.c for which one to use...
+ */
+#define HB_NOLOCK	0	/* No concurent access prevention */
+#define HB_LOCK		1	/* Prevent concurent write with global lock */
+
+/*
+ * Hash defines
+ */
+#define HASHBIN_SIZE   8
+#define HASHBIN_MASK   0x7
+
+#ifndef IRDA_ALIGN 
+#define IRDA_ALIGN __attribute__((aligned))
+#endif
+
+#define Q_NULL { NULL, NULL, "", 0 }
+
+typedef void (*FREE_FUNC)(void *arg);
+
+struct irda_queue {
+	struct irda_queue *q_next;
+	struct irda_queue *q_prev;
+
+	char   q_name[NAME_SIZE];
+	long   q_hash;			/* Must be able to cast a (void *) */
+};
+typedef struct irda_queue irda_queue_t;
+
+typedef struct hashbin_t {
+	__u32      magic;
+	int        hb_type;
+	int        hb_size;
+	spinlock_t hb_spinlock;		/* HB_LOCK - Can be used by the user */
+
+	irda_queue_t* hb_queue[HASHBIN_SIZE] IRDA_ALIGN;
+
+	irda_queue_t* hb_current;
+} hashbin_t;
+
+hashbin_t *hashbin_new(int type);
+int      hashbin_delete(hashbin_t* hashbin, FREE_FUNC func);
+int      hashbin_clear(hashbin_t* hashbin, FREE_FUNC free_func);
+void     hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv, 
+			const char* name);
+void*    hashbin_remove(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_remove_first(hashbin_t *hashbin);
+void*	 hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry);
+void*    hashbin_find(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_lock_find(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_find_next(hashbin_t* hashbin, long hashv, const char* name,
+			   void ** pnext);
+irda_queue_t *hashbin_get_first(hashbin_t *hashbin);
+irda_queue_t *hashbin_get_next(hashbin_t *hashbin);
+
+#define HASHBIN_GET_SIZE(hashbin) hashbin->hb_size
+
+#endif
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
new file mode 100644
index 000000000000..a899e5837be8
--- /dev/null
+++ b/include/net/irda/irttp.h
@@ -0,0 +1,210 @@
+/*********************************************************************
+ *                
+ * Filename:      irttp.h
+ * Version:       1.0
+ * Description:   Tiny Transport Protocol (TTP) definitions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:31 1997
+ * Modified at:   Sun Dec 12 13:09:07 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRTTP_H
+#define IRTTP_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>		/* struct lsap_cb */
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/irqueue.h>
+
+#define TTP_MAX_CONNECTIONS    LM_MAX_CONNECTIONS
+#define TTP_HEADER             1
+#define TTP_MAX_HEADER         (TTP_HEADER + LMP_MAX_HEADER)
+#define TTP_SAR_HEADER         5
+#define TTP_PARAMETERS         0x80
+#define TTP_MORE               0x80
+
+/* Transmission queue sizes */
+/* Worst case scenario, two window of data - Jean II */
+#define TTP_TX_MAX_QUEUE	14
+/* We need to keep at least 5 frames to make sure that we can refill
+ * appropriately the LAP layer. LAP keeps only two buffers, and we need
+ * to have 7 to make a full window - Jean II */
+#define TTP_TX_LOW_THRESHOLD	5
+/* Most clients are synchronous with respect to flow control, so we can
+ * keep a low number of Tx buffers in TTP - Jean II */
+#define TTP_TX_HIGH_THRESHOLD	7
+
+/* Receive queue sizes */
+/* Minimum of credit that the peer should hold.
+ * If the peer has less credits than 9 frames, we will explicitely send
+ * him some credits (through irttp_give_credit() and a specific frame).
+ * Note that when we give credits it's likely that it won't be sent in
+ * this LAP window, but in the next one. So, we make sure that the peer
+ * has something to send while waiting for credits (one LAP window == 7
+ * + 1 frames while he process the credits). - Jean II */
+#define TTP_RX_MIN_CREDIT	8
+/* This is the default maximum number of credits held by the peer, so the
+ * default maximum number of frames he can send us before needing flow
+ * control answer from us (this may be negociated differently at TSAP setup).
+ * We want to minimise the number of times we have to explicitely send some
+ * credit to the peer, hoping we can piggyback it on the return data. In
+ * particular, it doesn't make sense for us to send credit more than once
+ * per LAP window.
+ * Moreover, giving credits has some latency, so we need strictly more than
+ * a LAP window, otherwise we may already have credits in our Tx queue.
+ * But on the other hand, we don't want to keep too many Rx buffer here
+ * before starting to flow control the other end, so make it exactly one
+ * LAP window + 1 + MIN_CREDITS. - Jean II */
+#define TTP_RX_DEFAULT_CREDIT	16
+/* Maximum number of credits we can allow the peer to have, and therefore
+ * maximum Rx queue size.
+ * Note that we try to deliver packets to the higher layer every time we
+ * receive something, so in normal mode the Rx queue will never contains
+ * more than one or two packets. - Jean II */
+#define TTP_RX_MAX_CREDIT	21
+
+/* What clients should use when calling ttp_open_tsap() */
+#define DEFAULT_INITIAL_CREDIT	TTP_RX_DEFAULT_CREDIT
+
+/* Some priorities for disconnect requests */
+#define P_NORMAL    0
+#define P_HIGH      1
+
+#define TTP_SAR_DISABLE 0
+#define TTP_SAR_UNBOUND 0xffffffff
+
+/* Parameters */
+#define TTP_MAX_SDU_SIZE 0x01
+
+/*
+ *  This structure contains all data assosiated with one instance of a TTP 
+ *  connection.
+ */
+struct tsap_cb {
+	irda_queue_t q;            /* Must be first */
+	magic_t magic;        /* Just in case */
+
+	__u8 stsap_sel;       /* Source TSAP */
+	__u8 dtsap_sel;       /* Destination TSAP */
+
+	struct lsap_cb *lsap; /* Corresponding LSAP to this TSAP */
+
+	__u8 connected;       /* TSAP connected */
+	 
+	__u8 initial_credit;  /* Initial credit to give peer */
+
+        int avail_credit;    /* Available credit to return to peer */
+	int remote_credit;   /* Credit held by peer TTP entity */
+	int send_credit;     /* Credit held by local TTP entity */
+	
+	struct sk_buff_head tx_queue; /* Frames to be transmitted */
+	struct sk_buff_head rx_queue; /* Received frames */
+	struct sk_buff_head rx_fragments;
+	int tx_queue_lock;
+	int rx_queue_lock;
+	spinlock_t lock;
+
+	notify_t notify;       /* Callbacks to client layer */
+
+	struct net_device_stats stats;
+	struct timer_list todo_timer; 
+
+	__u32 max_seg_size;     /* Max data that fit into an IrLAP frame */
+	__u8  max_header_size;
+
+	int   rx_sdu_busy;     /* RxSdu.busy */
+	__u32 rx_sdu_size;     /* Current size of a partially received frame */
+	__u32 rx_max_sdu_size; /* Max receive user data size */
+
+	int tx_sdu_busy;       /* TxSdu.busy */
+	__u32 tx_max_sdu_size; /* Max transmit user data size */
+
+	int close_pend;        /* Close, but disconnect_pend */
+	unsigned long disconnect_pend; /* Disconnect, but still data to send */
+	struct sk_buff *disconnect_skb;
+};
+
+struct irttp_cb {
+	magic_t    magic;	
+	hashbin_t *tsaps;
+};
+
+int  irttp_init(void);
+void irttp_cleanup(void);
+
+struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify);
+int irttp_close_tsap(struct tsap_cb *self);
+
+int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb);
+int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb);
+
+int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel, 
+			  __u32 saddr, __u32 daddr,
+			  struct qos_info *qos, __u32 max_sdu_size, 
+			  struct sk_buff *userdata);
+int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size, 
+			    struct sk_buff *userdata);
+int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *skb,
+			     int priority);
+void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow);
+struct tsap_cb *irttp_dup(struct tsap_cb *self, void *instance);
+
+static __inline __u32 irttp_get_saddr(struct tsap_cb *self)
+{
+	return irlmp_get_saddr(self->lsap);
+}
+
+static __inline __u32 irttp_get_daddr(struct tsap_cb *self)
+{
+	return irlmp_get_daddr(self->lsap);
+}
+
+static __inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
+{
+	return self->max_seg_size;
+}
+
+/* After doing a irttp_dup(), this get one of the two socket back into
+ * a state where it's waiting incomming connections.
+ * Note : this can be used *only* if the socket is not yet connected
+ * (i.e. NO irttp_connect_response() done on this socket).
+ * - Jean II */
+static inline void irttp_listen(struct tsap_cb *self)
+{
+	irlmp_listen(self->lsap);
+	self->dtsap_sel = LSAP_ANY;
+}
+
+/* Return TRUE if the node is in primary mode (i.e. master)
+ * - Jean II */
+static inline int irttp_is_primary(struct tsap_cb *self)
+{
+	if ((self == NULL) ||
+	    (self->lsap == NULL) ||
+	    (self->lsap->lap == NULL) ||
+	    (self->lsap->lap->irlap == NULL))
+		return -2;
+	return(irlap_is_primary(self->lsap->lap->irlap));
+}
+
+#endif /* IRTTP_H */
diff --git a/include/net/irda/parameters.h b/include/net/irda/parameters.h
new file mode 100644
index 000000000000..3a605d37ddbf
--- /dev/null
+++ b/include/net/irda/parameters.h
@@ -0,0 +1,102 @@
+/*********************************************************************
+ *                
+ * Filename:      parameters.h
+ * Version:       1.0
+ * Description:   A more general way to handle (pi,pl,pv) parameters
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 08:47:28 1999
+ * Modified at:   Sun Jan 30 14:05:14 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *
+ *     Michel Dänzer <daenzer@debian.org>, 10/2001
+ *     - simplify irda_pv_t to avoid endianness issues
+ *     
+ ********************************************************************/
+
+#ifndef IRDA_PARAMS_H
+#define IRDA_PARAMS_H
+
+/*
+ *  The currently supported types. Beware not to change the sequence since
+ *  it a good reason why the sized integers has a value equal to their size
+ */
+typedef enum {
+	PV_INTEGER,      /* Integer of any (pl) length */
+	PV_INT_8_BITS,   /* Integer of 8 bits in length */
+	PV_INT_16_BITS,  /* Integer of 16 bits in length */
+	PV_STRING,       /* \0 terminated string */
+	PV_INT_32_BITS,  /* Integer of 32 bits in length */
+	PV_OCT_SEQ,      /* Octet sequence */
+	PV_NO_VALUE      /* Does not contain any value (pl=0) */
+} PV_TYPE;
+
+/* Bit 7 of type field */
+#define PV_BIG_ENDIAN    0x80 
+#define PV_LITTLE_ENDIAN 0x00
+#define PV_MASK          0x7f   /* To mask away endian bit */
+
+#define PV_PUT 0
+#define PV_GET 1
+
+typedef union {
+	char   *c;
+	__u32   i;
+	__u32 *ip;
+} irda_pv_t;
+
+typedef struct {
+	__u8 pi;
+	__u8 pl;
+	irda_pv_t pv;
+} irda_param_t;
+
+typedef int (*PI_HANDLER)(void *self, irda_param_t *param, int get);
+typedef int (*PV_HANDLER)(void *self, __u8 *buf, int len, __u8 pi,
+			  PV_TYPE type, PI_HANDLER func);
+
+typedef struct {
+	PI_HANDLER func;  /* Handler for this parameter identifier */
+	PV_TYPE    type;  /* Data type for this parameter */
+} pi_minor_info_t;
+
+typedef struct {
+	pi_minor_info_t *pi_minor_call_table;
+	int len;
+} pi_major_info_t;
+
+typedef struct {
+	pi_major_info_t *tables;
+	int              len;
+	__u8             pi_mask;
+	int              pi_major_offset;
+} pi_param_info_t;
+
+int irda_param_pack(__u8 *buf, char *fmt, ...);
+
+int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, 
+		      pi_param_info_t *info);
+int irda_param_extract_all(void *self, __u8 *buf, int len, 
+			   pi_param_info_t *info);
+
+#define irda_param_insert_byte(buf,pi,pv) irda_param_pack(buf,"bbb",pi,1,pv)
+
+#endif /* IRDA_PARAMS_H */
+
diff --git a/include/net/irda/qos.h b/include/net/irda/qos.h
new file mode 100644
index 000000000000..9ae3d6bc2423
--- /dev/null
+++ b/include/net/irda/qos.h
@@ -0,0 +1,104 @@
+/*********************************************************************
+ *                
+ * Filename:      qos.h
+ * Version:       1.0
+ * Description:   Quality of Service definitions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Fri Sep 19 23:21:09 1997
+ * Modified at:   Thu Dec  2 13:51:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRDA_QOS_H
+#define IRDA_QOS_H
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/parameters.h>
+
+#define PI_BAUD_RATE     0x01
+#define PI_MAX_TURN_TIME 0x82
+#define PI_DATA_SIZE     0x83
+#define PI_WINDOW_SIZE   0x84
+#define PI_ADD_BOFS      0x85
+#define PI_MIN_TURN_TIME 0x86
+#define PI_LINK_DISC     0x08
+
+#define IR_115200_MAX 0x3f
+
+/* Baud rates (first byte) */
+#define IR_2400     0x01
+#define IR_9600     0x02
+#define IR_19200    0x04
+#define IR_38400    0x08
+#define IR_57600    0x10
+#define IR_115200   0x20
+#define IR_576000   0x40
+#define IR_1152000  0x80
+
+/* Baud rates (second byte) */
+#define IR_4000000  0x01
+#define IR_16000000 0x02
+
+/* Quality of Service information */
+typedef struct {
+	__u32 value;
+	__u16 bits; /* LSB is first byte, MSB is second byte */
+} qos_value_t;
+
+struct qos_info {
+	magic_t magic;
+
+	qos_value_t baud_rate;       /* IR_11520O | ... */
+	qos_value_t max_turn_time;
+	qos_value_t data_size;
+	qos_value_t window_size;
+	qos_value_t additional_bofs;
+	qos_value_t min_turn_time;
+	qos_value_t link_disc_time;
+	
+	qos_value_t power;
+};
+
+extern int sysctl_max_baud_rate;
+extern int sysctl_max_inactive_time;
+
+void irda_init_max_qos_capabilies(struct qos_info *qos);
+void irda_qos_compute_intersection(struct qos_info *, struct qos_info *);
+
+__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time);
+
+void irda_qos_bits_to_value(struct qos_info *qos);
+
+/* So simple, how could we not inline those two ?
+ * Note : one byte is 10 bits if you include start and stop bits
+ * Jean II */
+#define irlap_min_turn_time_in_bytes(speed, min_turn_time) (	\
+	speed * min_turn_time / 10000000			\
+)
+#define irlap_xbofs_in_usec(speed, xbofs) (			\
+	xbofs * 10000000 / speed				\
+)
+
+#endif
+
diff --git a/include/net/irda/timer.h b/include/net/irda/timer.h
new file mode 100644
index 000000000000..2c5d8864ab77
--- /dev/null
+++ b/include/net/irda/timer.h
@@ -0,0 +1,104 @@
+/*********************************************************************
+ *                
+ * Filename:      timer.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Thu Oct  7 12:25:24 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef TIMER_H
+#define TIMER_H
+
+#include <linux/timer.h>
+
+#include <asm/param.h>  /* for HZ */
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlmp_cb;
+struct irlap_cb;
+struct lsap_cb;
+struct lap_cb;
+
+/* 
+ *  Timeout definitions, some defined in IrLAP 6.13.5 - p. 92
+ */
+#define POLL_TIMEOUT        (450*HZ/1000)    /* Must never exceed 500 ms */
+#define FINAL_TIMEOUT       (500*HZ/1000)    /* Must never exceed 500 ms */
+
+/* 
+ *  Normally twice of p-timer. Note 3, IrLAP 6.3.11.2 - p. 60 suggests
+ *  at least twice duration of the P-timer.
+ */
+#define WD_TIMEOUT          (POLL_TIMEOUT*2)
+
+#define MEDIABUSY_TIMEOUT   (500*HZ/1000)    /* 500 msec */
+#define SMALLBUSY_TIMEOUT   (100*HZ/1000)    /* 100 msec - IrLAP 6.13.4 */
+
+/*
+ *  Slot timer must never exceed 85 ms, and must always be at least 25 ms, 
+ *  suggested to  75-85 msec by IrDA lite. This doesn't work with a lot of
+ *  devices, and other stackes uses a lot more, so it's best we do it as well
+ *  (Note : this is the default value and sysctl overides it - Jean II)
+ */
+#define SLOT_TIMEOUT            (90*HZ/1000)
+
+/* 
+ *  The latest discovery frame (XID) is longer due to the extra discovery
+ *  information (hints, device name...). This is its extra length.
+ *  We use that when setting the query timeout. Jean II
+ */
+#define XIDEXTRA_TIMEOUT        (34*HZ/1000)  /* 34 msec */
+
+#define WATCHDOG_TIMEOUT        (20*HZ)       /* 20 sec */
+
+typedef void (*TIMER_CALLBACK)(void *);
+
+static inline void irda_start_timer(struct timer_list *ptimer, int timeout, 
+				    void* data, TIMER_CALLBACK callback)
+{
+	ptimer->function = (void (*)(unsigned long)) callback;
+	ptimer->data = (unsigned long) data;
+	
+	/* Set new value for timer (update or add timer).
+	 * We use mod_timer() because it's more efficient and also
+	 * safer with respect to race conditions - Jean II */
+	mod_timer(ptimer, jiffies + timeout);
+}
+
+
+void irlap_start_slot_timer(struct irlap_cb *self, int timeout);
+void irlap_start_query_timer(struct irlap_cb *self, int S, int s);
+void irlap_start_final_timer(struct irlap_cb *self, int timeout);
+void irlap_start_wd_timer(struct irlap_cb *self, int timeout);
+void irlap_start_backoff_timer(struct irlap_cb *self, int timeout);
+
+void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout);
+void irlap_stop_mbusy_timer(struct irlap_cb *);
+
+void irlmp_start_watchdog_timer(struct lsap_cb *, int timeout);
+void irlmp_start_discovery_timer(struct irlmp_cb *, int timeout);
+void irlmp_start_idle_timer(struct lap_cb *, int timeout);
+void irlmp_stop_idle_timer(struct lap_cb *self);
+
+#endif
+
diff --git a/include/net/irda/wrapper.h b/include/net/irda/wrapper.h
new file mode 100644
index 000000000000..98768b3f9e31
--- /dev/null
+++ b/include/net/irda/wrapper.h
@@ -0,0 +1,58 @@
+/*********************************************************************
+ *                
+ * Filename:      wrapper.h
+ * Version:       1.2
+ * Description:   IrDA SIR async wrapper layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Tue Jan 11 12:37:29 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef WRAPPER_H
+#define WRAPPER_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irda_device.h>	/* iobuff_t */
+
+#define BOF  0xc0 /* Beginning of frame */
+#define XBOF 0xff
+#define EOF  0xc1 /* End of frame */
+#define CE   0x7d /* Control escape */
+
+#define STA BOF  /* Start flag */
+#define STO EOF  /* End flag */
+
+#define IRDA_TRANS 0x20    /* Asynchronous transparency modifier */       
+
+/* States for receving a frame in async mode */
+enum {
+	OUTSIDE_FRAME, 
+	BEGIN_FRAME, 
+	LINK_ESCAPE, 
+	INSIDE_FRAME
+};
+
+/* Proto definitions */
+int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize);
+void async_unwrap_char(struct net_device *dev, struct net_device_stats *stats,
+		       iobuff_t *buf, __u8 byte);
+
+#endif
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
new file mode 100644
index 000000000000..44edd48f1234
--- /dev/null
+++ b/include/net/iw_handler.h
@@ -0,0 +1,540 @@
+/*
+ * This file define the new driver API for Wireless Extensions
+ *
+ * Version :	6	21.6.04
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 2001-2004 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _IW_HANDLER_H
+#define _IW_HANDLER_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial driver API (1996 -> onward) :
+ * -----------------------------------
+ * The initial API just sends the IOCTL request received from user space
+ * to the driver (via the driver ioctl handler). The driver has to
+ * handle all the rest...
+ *
+ * The initial API also defines a specific handler in struct net_device
+ * to handle wireless statistics.
+ *
+ * The initial APIs served us well and has proven a reasonably good design.
+ * However, there is a few shortcommings :
+ *	o No events, everything is a request to the driver.
+ *	o Large ioctl function in driver with gigantic switch statement
+ *	  (i.e. spaghetti code).
+ *	o Driver has to mess up with copy_to/from_user, and in many cases
+ *	  does it unproperly. Common mistakes are :
+ *		* buffer overflows (no checks or off by one checks)
+ *		* call copy_to/from_user with irq disabled
+ *	o The user space interface is tied to ioctl because of the use
+ *	  copy_to/from_user.
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * The new driver API is just a bunch of standard functions (handlers),
+ * each handling a specific Wireless Extension. The driver just export
+ * the list of handler it supports, and those will be called apropriately.
+ *
+ * I tried to keep the main advantage of the previous API (simplicity,
+ * efficiency and light weight), and also I provide a good dose of backward
+ * compatibility (most structures are the same, driver can use both API
+ * simultaneously, ...).
+ * Hopefully, I've also addressed the shortcomming of the initial API.
+ *
+ * The advantage of the new API are :
+ *	o Handling of Extensions in driver broken in small contained functions
+ *	o Tighter checks of ioctl before calling the driver
+ *	o Flexible commit strategy (at least, the start of it)
+ *	o Backward compatibility (can be mixed with old API)
+ *	o Driver doesn't have to worry about memory and user-space issues
+ * The last point is important for the following reasons :
+ *	o You are now able to call the new driver API from any API you
+ *		want (including from within other parts of the kernel).
+ *	o Common mistakes are avoided (buffer overflow, user space copy
+ *		with irq disabled and so on).
+ *
+ * The Drawback of the new API are :
+ *	o bloat (especially kernel)
+ *	o need to migrate existing drivers to new API
+ * My initial testing shows that the new API adds around 3kB to the kernel
+ * and save between 0 and 5kB from a typical driver.
+ * Also, as all structures and data types are unchanged, the migration is
+ * quite straightforward (but tedious).
+ *
+ * ---
+ *
+ * The new driver API is defined below in this file. User space should
+ * not be aware of what's happening down there...
+ *
+ * A new kernel wrapper is in charge of validating the IOCTLs and calling
+ * the appropriate driver handler. This is implemented in :
+ *	# net/core/wireless.c
+ *
+ * The driver export the list of handlers in :
+ *	# include/linux/netdevice.h (one place)
+ *
+ * The new driver API is available for WIRELESS_EXT >= 13.
+ * Good luck with migration to the new API ;-)
+ */
+
+/* ---------------------- THE IMPLEMENTATION ---------------------- */
+/*
+ * Some of the choice I've made are pretty controversials. Defining an
+ * API is very much weighting compromises. This goes into some of the
+ * details and the thinking behind the implementation.
+ *
+ * Implementation goals :
+ * --------------------
+ * The implementation goals were as follow :
+ *	o Obvious : you should not need a PhD to understand what's happening,
+ *		the benefit is easier maintainance.
+ *	o Flexible : it should accommodate a wide variety of driver
+ *		implementations and be as flexible as the old API.
+ *	o Lean : it should be efficient memory wise to minimise the impact
+ *		on kernel footprint.
+ *	o Transparent to user space : the large number of user space
+ *		applications that use Wireless Extensions should not need
+ *		any modifications.
+ *
+ * Array of functions versus Struct of functions
+ * ---------------------------------------------
+ * 1) Having an array of functions allow the kernel code to access the
+ * handler in a single lookup, which is much more efficient (think hash
+ * table here).
+ * 2) The only drawback is that driver writer may put their handler in
+ * the wrong slot. This is trivial to test (I set the frequency, the
+ * bitrate changes). Once the handler is in the proper slot, it will be
+ * there forever, because the array is only extended at the end.
+ * 3) Backward/forward compatibility : adding new handler just require
+ * extending the array, so you can put newer driver in older kernel
+ * without having to patch the kernel code (and vice versa).
+ *
+ * All handler are of the same generic type
+ * ----------------------------------------
+ * That's a feature !!!
+ * 1) Having a generic handler allow to have generic code, which is more
+ * efficient. If each of the handler was individually typed I would need
+ * to add a big switch in the kernel (== more bloat). This solution is
+ * more scalable, adding new Wireless Extensions doesn't add new code.
+ * 2) You can use the same handler in different slots of the array. For
+ * hardware, it may be more efficient or logical to handle multiple
+ * Wireless Extensions with a single function, and the API allow you to
+ * do that. (An example would be a single record on the card to control
+ * both bitrate and frequency, the handler would read the old record,
+ * modify it according to info->cmd and rewrite it).
+ *
+ * Functions prototype uses union iwreq_data
+ * -----------------------------------------
+ * Some would have prefered functions defined this way :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev, 
+ *					  long rate, int auto)
+ * 1) The kernel code doesn't "validate" the content of iwreq_data, and
+ * can't do it (different hardware may have different notion of what a
+ * valid frequency is), so we don't pretend that we do it.
+ * 2) The above form is not extendable. If I want to add a flag (for
+ * example to distinguish setting max rate and basic rate), I would
+ * break the prototype. Using iwreq_data is more flexible.
+ * 3) Also, the above form is not generic (see above).
+ * 4) I don't expect driver developper using the wrong field of the
+ * union (Doh !), so static typechecking doesn't add much value.
+ * 5) Lastly, you can skip the union by doing :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev,
+ *					  struct iw_request_info *info,
+ *					  struct iw_param *rrq,
+ *					  char *extra)
+ * And then adding the handler in the array like this :
+ *        (iw_handler) mydriver_ioctl_setrate,             // SIOCSIWRATE
+ *
+ * Using functions and not a registry
+ * ----------------------------------
+ * Another implementation option would have been for every instance to
+ * define a registry (a struct containing all the Wireless Extensions)
+ * and only have a function to commit the registry to the hardware.
+ * 1) This approach can be emulated by the current code, but not
+ * vice versa.
+ * 2) Some drivers don't keep any configuration in the driver, for them
+ * adding such a registry would be a significant bloat.
+ * 3) The code to translate from Wireless Extension to native format is
+ * needed anyway, so it would not reduce significantely the amount of code.
+ * 4) The current approach only selectively translate Wireless Extensions
+ * to native format and only selectively set, whereas the registry approach
+ * would require to translate all WE and set all parameters for any single
+ * change.
+ * 5) For many Wireless Extensions, the GET operation return the current
+ * dynamic value, not the value that was set.
+ *
+ * This header is <net/iw_handler.h>
+ * ---------------------------------
+ * 1) This header is kernel space only and should not be exported to
+ * user space. Headers in "include/linux/" are exported, headers in
+ * "include/net/" are not.
+ *
+ * Mixed 32/64 bit issues
+ * ----------------------
+ * The Wireless Extensions are designed to be 64 bit clean, by using only
+ * datatypes with explicit storage size.
+ * There are some issues related to kernel and user space using different
+ * memory model, and in particular 64bit kernel with 32bit user space.
+ * The problem is related to struct iw_point, that contains a pointer
+ * that *may* need to be translated.
+ * This is quite messy. The new API doesn't solve this problem (it can't),
+ * but is a step in the right direction :
+ * 1) Meta data about each ioctl is easily available, so we know what type
+ * of translation is needed.
+ * 2) The move of data between kernel and user space is only done in a single
+ * place in the kernel, so adding specific hooks in there is possible.
+ * 3) In the long term, it allows to move away from using ioctl as the
+ * user space API.
+ *
+ * So many comments and so few code
+ * --------------------------------
+ * That's a feature. Comments won't bloat the resulting kernel binary.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/wireless.h>		/* IOCTL user space API */
+#include <linux/if_ether.h>
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know which version of the driver API is
+ * available. Hopefully, this will be pretty stable and no changes
+ * will be needed...
+ * I just plan to increment with each new version.
+ */
+#define IW_HANDLER_VERSION	6
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	- Move event definition in <linux/wireless.h>
+ *	- Add Wireless Event support :
+ *		o wireless_send_event() prototype
+ *		o iwe_stream_add_event/point() inline functions
+ * V3 to V4
+ * --------
+ *	- Reshuffle IW_HEADER_TYPE_XXX to map IW_PRIV_TYPE_XXX changes
+ *
+ * V4 to V5
+ * --------
+ *	- Add new spy support : struct iw_spy_data & prototypes
+ *
+ * V5 to V6
+ * --------
+ *	- Change the way we get to spy_data method for added safety
+ *	- Remove spy #ifdef, they are always on -> cleaner code
+ *	- Add IW_DESCR_FLAG_NOMAX flag for very large requests
+ *	- Start migrating get_wireless_stats to struct iw_handler_def
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* Enhanced spy support available */
+#define IW_WIRELESS_SPY
+#define IW_WIRELESS_THRSPY
+
+/* Special error message for the driver to indicate that we
+ * should do a commit after return from the iw_handler */
+#define EIWCOMMIT	EINPROGRESS
+
+/* Flags available in struct iw_request_info */
+#define IW_REQUEST_FLAG_NONE	0x0000	/* No flag so far */
+
+/* Type of headers we know about (basically union iwreq_data) */
+#define IW_HEADER_TYPE_NULL	0	/* Not available */
+#define IW_HEADER_TYPE_CHAR	2	/* char [IFNAMSIZ] */
+#define IW_HEADER_TYPE_UINT	4	/* __u32 */
+#define IW_HEADER_TYPE_FREQ	5	/* struct iw_freq */
+#define IW_HEADER_TYPE_ADDR	6	/* struct sockaddr */
+#define IW_HEADER_TYPE_POINT	8	/* struct iw_point */
+#define IW_HEADER_TYPE_PARAM	9	/* struct iw_param */
+#define IW_HEADER_TYPE_QUAL	10	/* struct iw_quality */
+
+/* Handling flags */
+/* Most are not implemented. I just use them as a reminder of some
+ * cool features we might need one day ;-) */
+#define IW_DESCR_FLAG_NONE	0x0000	/* Obvious */
+/* Wrapper level flags */
+#define IW_DESCR_FLAG_DUMP	0x0001	/* Not part of the dump command */
+#define IW_DESCR_FLAG_EVENT	0x0002	/* Generate an event on SET */
+#define IW_DESCR_FLAG_RESTRICT	0x0004	/* GET : request is ROOT only */
+				/* SET : Omit payload from generated iwevent */
+#define IW_DESCR_FLAG_NOMAX	0x0008	/* GET : no limit on request size */
+/* Driver level flags */
+#define IW_DESCR_FLAG_WAIT	0x0100	/* Wait for driver event */
+
+/****************************** TYPES ******************************/
+
+/* ----------------------- WIRELESS HANDLER ----------------------- */
+/*
+ * A wireless handler is just a standard function, that looks like the
+ * ioctl handler.
+ * We also define there how a handler list look like... As the Wireless
+ * Extension space is quite dense, we use a simple array, which is faster
+ * (that's the perfect hash table ;-).
+ */
+
+/*
+ * Meta data about the request passed to the iw_handler.
+ * Most handlers can safely ignore what's in there.
+ * The 'cmd' field might come handy if you want to use the same handler
+ * for multiple command...
+ * This struct is also my long term insurance. I can add new fields here
+ * without breaking the prototype of iw_handler...
+ */
+struct iw_request_info
+{
+	__u16		cmd;		/* Wireless Extension command */
+	__u16		flags;		/* More to come ;-) */
+};
+
+struct net_device;
+
+/*
+ * This is how a function handling a Wireless Extension should look
+ * like (both get and set, standard and private).
+ */
+typedef int (*iw_handler)(struct net_device *dev, struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+
+/*
+ * This define all the handler that the driver export.
+ * As you need only one per driver type, please use a static const
+ * shared by all driver instances... Same for the members...
+ * This will be linked from net_device in <linux/netdevice.h>
+ */
+struct iw_handler_def
+{
+	/* Number of handlers defined (more precisely, index of the
+	 * last defined handler + 1) */
+	__u16			num_standard;
+	__u16			num_private;
+	/* Number of private arg description */
+	__u16			num_private_args;
+
+	/* Array of handlers for standard ioctls
+	 * We will call dev->wireless_handlers->standard[ioctl - SIOCSIWNAME]
+	 */
+	const iw_handler *	standard;
+
+	/* Array of handlers for private ioctls
+	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
+	 */
+	const iw_handler *	private;
+
+	/* Arguments of private handler. This one is just a list, so you
+	 * can put it in any order you want and should not leave holes...
+	 * We will automatically export that to user space... */
+	const struct iw_priv_args *	private_args;
+
+	/* This field will be *removed* in the next version of WE */
+	long			spy_offset;	/* DO NOT USE */
+
+	/* New location of get_wireless_stats, to de-bloat struct net_device.
+	 * The old pointer in struct net_device will be gradually phased
+	 * out, and drivers are encouraged to use this one... */
+	struct iw_statistics*	(*get_wireless_stats)(struct net_device *dev);
+};
+
+/* ---------------------- IOCTL DESCRIPTION ---------------------- */
+/*
+ * One of the main goal of the new interface is to deal entirely with
+ * user space/kernel space memory move.
+ * For that, we need to know :
+ *	o if iwreq is a pointer or contain the full data
+ *	o what is the size of the data to copy
+ *
+ * For private IOCTLs, we use the same rules as used by iwpriv and
+ * defined in struct iw_priv_args.
+ *
+ * For standard IOCTLs, things are quite different and we need to
+ * use the stuctures below. Actually, this struct is also more
+ * efficient, but that's another story...
+ */
+
+/*
+ * Describe how a standard IOCTL looks like.
+ */
+struct iw_ioctl_description
+{
+	__u8	header_type;		/* NULL, iw_point or other */
+	__u8	token_type;		/* Future */
+	__u16	token_size;		/* Granularity of payload */
+	__u16	min_tokens;		/* Min acceptable token number */
+	__u16	max_tokens;		/* Max acceptable token number */
+	__u32	flags;			/* Special handling of the request */
+};
+
+/* Need to think of short header translation table. Later. */
+
+/* --------------------- ENHANCED SPY SUPPORT --------------------- */
+/*
+ * In the old days, the driver was handling spy support all by itself.
+ * Now, the driver can delegate this task to Wireless Extensions.
+ * It needs to include this struct in its private part and use the
+ * standard spy iw_handler.
+ */
+
+/*
+ * Instance specific spy data, i.e. addresses spied and quality for them.
+ */
+struct iw_spy_data
+{
+	/* --- Standard spy support --- */
+	int			spy_number;
+	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
+	struct iw_quality	spy_stat[IW_MAX_SPY];
+	/* --- Enhanced spy support (event) */
+	struct iw_quality	spy_thr_low;	/* Low threshold */
+	struct iw_quality	spy_thr_high;	/* High threshold */
+	u_char			spy_thr_under[IW_MAX_SPY];
+};
+
+/* --------------------- DEVICE WIRELESS DATA --------------------- */
+/*
+ * This is all the wireless data specific to a device instance that
+ * is managed by the core of Wireless Extensions.
+ * We only keep pointer to those structures, so that a driver is free
+ * to share them between instances.
+ * This structure should be initialised before registering the device.
+ * Access to this data follow the same rules as any other struct net_device
+ * data (i.e. valid as long as struct net_device exist, same locking rules).
+ */
+struct iw_public_data {
+	/* Driver enhanced spy support */
+	struct iw_spy_data *	spy_data;
+};
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Functions part of the Wireless Extensions (defined in net/core/wireless.c).
+ * Those may be called only within the kernel.
+ */
+
+/* First : function strictly used inside the kernel */
+
+/* Handle /proc/net/wireless, called in net/code/dev.c */
+extern int dev_get_wireless_info(char * buffer, char **start, off_t offset,
+				 int length);
+
+/* Handle IOCTLs, called in net/code/dev.c */
+extern int wireless_process_ioctl(struct ifreq *ifr, unsigned int cmd);
+
+/* Second : functions that may be called by driver modules */
+
+/* Send a single event to user space */
+extern void wireless_send_event(struct net_device *	dev,
+				unsigned int		cmd,
+				union iwreq_data *	wrqu,
+				char *			extra);
+
+/* We may need a function to send a stream of events to user space.
+ * More on that later... */
+
+/* Standard handler for SIOCSIWSPY */
+extern int iw_handler_set_spy(struct net_device *	dev,
+			      struct iw_request_info *	info,
+			      union iwreq_data *	wrqu,
+			      char *			extra);
+/* Standard handler for SIOCGIWSPY */
+extern int iw_handler_get_spy(struct net_device *	dev,
+			      struct iw_request_info *	info,
+			      union iwreq_data *	wrqu,
+			      char *			extra);
+/* Standard handler for SIOCSIWTHRSPY */
+extern int iw_handler_set_thrspy(struct net_device *	dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *	wrqu,
+				 char *			extra);
+/* Standard handler for SIOCGIWTHRSPY */
+extern int iw_handler_get_thrspy(struct net_device *	dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *	wrqu,
+				 char *			extra);
+/* Driver call to update spy records */
+extern void wireless_spy_update(struct net_device *	dev,
+				unsigned char *		address,
+				struct iw_quality *	wstats);
+
+/************************* INLINE FUNTIONS *************************/
+/*
+ * Function that are so simple that it's more efficient inlining them
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an Wireless Event to a stream of events.
+ */
+static inline char *
+iwe_stream_add_event(char *	stream,		/* Stream of events */
+		     char *	ends,		/* End of stream */
+		     struct iw_event *iwe,	/* Payload */
+		     int	event_len)	/* Real size of payload */
+{
+	/* Check if it's possible */
+	if((stream + event_len) < ends) {
+		iwe->len = event_len;
+		memcpy(stream, (char *) iwe, event_len);
+		stream += event_len;
+	}
+	return stream;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an short Wireless Event containing a pointer to a
+ * stream of events.
+ */
+static inline char *
+iwe_stream_add_point(char *	stream,		/* Stream of events */
+		     char *	ends,		/* End of stream */
+		     struct iw_event *iwe,	/* Payload */
+		     char *	extra)
+{
+	int	event_len = IW_EV_POINT_LEN + iwe->u.data.length;
+	/* Check if it's possible */
+	if((stream + event_len) < ends) {
+		iwe->len = event_len;
+		memcpy(stream, (char *) iwe, IW_EV_POINT_LEN);
+		memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length);
+		stream += event_len;
+	}
+	return stream;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add a value to a Wireless Event in a stream of events.
+ * Be careful, this one is tricky to use properly :
+ * At the first run, you need to have (value = event + IW_EV_LCP_LEN).
+ */
+static inline char *
+iwe_stream_add_value(char *	event,		/* Event in the stream */
+		     char *	value,		/* Value in event */
+		     char *	ends,		/* End of stream */
+		     struct iw_event *iwe,	/* Payload */
+		     int	event_len)	/* Real size of payload */
+{
+	/* Don't duplicate LCP */
+	event_len -= IW_EV_LCP_LEN;
+
+	/* Check if it's possible */
+	if((value + event_len) < ends) {
+		/* Add new value */
+		memcpy(value, (char *) iwe + IW_EV_LCP_LEN, event_len);
+		value += event_len;
+		/* Patch LCP */
+		iwe->len = value - event;
+		memcpy(event, (char *) iwe, IW_EV_LCP_LEN);
+	}
+	return value;
+}
+
+#endif	/* _IW_HANDLER_H */
diff --git a/include/net/lapb.h b/include/net/lapb.h
new file mode 100644
index 000000000000..96cb5ddaa9f1
--- /dev/null
+++ b/include/net/lapb.h
@@ -0,0 +1,152 @@
+#ifndef _LAPB_H
+#define _LAPB_H 
+#include <linux/lapb.h>
+
+#define	LAPB_HEADER_LEN	20		/* LAPB over Ethernet + a bit more */
+
+#define	LAPB_ACK_PENDING_CONDITION	0x01
+#define	LAPB_REJECT_CONDITION		0x02
+#define	LAPB_PEER_RX_BUSY_CONDITION	0x04
+
+/* Control field templates */
+#define	LAPB_I		0x00	/* Information frames */
+#define	LAPB_S		0x01	/* Supervisory frames */
+#define	LAPB_U		0x03	/* Unnumbered frames */
+
+#define	LAPB_RR		0x01	/* Receiver ready */
+#define	LAPB_RNR	0x05	/* Receiver not ready */
+#define	LAPB_REJ	0x09	/* Reject */
+
+#define	LAPB_SABM	0x2F	/* Set Asynchronous Balanced Mode */
+#define	LAPB_SABME	0x6F	/* Set Asynchronous Balanced Mode Extended */
+#define	LAPB_DISC	0x43	/* Disconnect */
+#define	LAPB_DM		0x0F	/* Disconnected mode */
+#define	LAPB_UA		0x63	/* Unnumbered acknowledge */
+#define	LAPB_FRMR	0x87	/* Frame reject */
+
+#define LAPB_ILLEGAL	0x100	/* Impossible to be a real frame type */
+
+#define	LAPB_SPF	0x10	/* Poll/final bit for standard LAPB */
+#define	LAPB_EPF	0x01	/* Poll/final bit for extended LAPB */
+
+#define	LAPB_FRMR_W	0x01	/* Control field invalid	*/
+#define	LAPB_FRMR_X	0x02	/* I field invalid		*/
+#define	LAPB_FRMR_Y	0x04	/* I field too long		*/
+#define	LAPB_FRMR_Z	0x08	/* Invalid N(R)			*/
+
+#define	LAPB_POLLOFF	0
+#define	LAPB_POLLON	1
+
+/* LAPB C-bit */
+#define LAPB_COMMAND	1
+#define LAPB_RESPONSE	2
+
+#define	LAPB_ADDR_A	0x03
+#define	LAPB_ADDR_B	0x01
+#define	LAPB_ADDR_C	0x0F
+#define	LAPB_ADDR_D	0x07
+
+/* Define Link State constants. */
+enum {
+	LAPB_STATE_0,	/* Disconnected State		*/
+	LAPB_STATE_1,	/* Awaiting Connection State	*/
+	LAPB_STATE_2,	/* Awaiting Disconnection State	*/
+	LAPB_STATE_3,	/* Data Transfer State		*/
+	LAPB_STATE_4	/* Frame Reject State		*/
+};
+
+#define	LAPB_DEFAULT_MODE		(LAPB_STANDARD | LAPB_SLP | LAPB_DTE)
+#define	LAPB_DEFAULT_WINDOW		7		/* Window=7 */
+#define	LAPB_DEFAULT_T1			(5 * HZ)	/* T1=5s    */
+#define	LAPB_DEFAULT_T2			(1 * HZ)	/* T2=1s    */
+#define	LAPB_DEFAULT_N2			20		/* N2=20    */
+
+#define	LAPB_SMODULUS	8
+#define	LAPB_EMODULUS	128
+
+/*
+ *	Information about the current frame.
+ */
+struct lapb_frame {
+	unsigned short		type;		/* Parsed type		*/
+	unsigned short		nr, ns;		/* N(R), N(S)		*/
+	unsigned char		cr;		/* Command/Response	*/
+	unsigned char		pf;		/* Poll/Final		*/
+	unsigned char		control[2];	/* Original control data*/
+};
+
+/*
+ *	The per LAPB connection control structure.
+ */
+struct lapb_cb {
+	struct list_head	node;
+	struct net_device	*dev;
+
+	/* Link status fields */
+	unsigned int		mode;
+	unsigned char		state;
+	unsigned short		vs, vr, va;
+	unsigned char		condition;
+	unsigned short		n2, n2count;
+	unsigned short		t1, t2;
+	struct timer_list	t1timer, t2timer;
+
+	/* Internal control information */
+	struct sk_buff_head	write_queue;
+	struct sk_buff_head	ack_queue;
+	unsigned char		window;
+	struct lapb_register_struct callbacks;
+
+	/* FRMR control information */
+	struct lapb_frame	frmr_data;
+	unsigned char		frmr_type;
+
+	atomic_t		refcnt;
+};
+
+/* lapb_iface.c */
+extern void lapb_connect_confirmation(struct lapb_cb *lapb, int);
+extern void lapb_connect_indication(struct lapb_cb *lapb, int);
+extern void lapb_disconnect_confirmation(struct lapb_cb *lapb, int);
+extern void lapb_disconnect_indication(struct lapb_cb *lapb, int);
+extern int  lapb_data_indication(struct lapb_cb *lapb, struct sk_buff *);
+extern int  lapb_data_transmit(struct lapb_cb *lapb, struct sk_buff *);
+
+/* lapb_in.c */
+extern void lapb_data_input(struct lapb_cb *lapb, struct sk_buff *);
+
+/* lapb_out.c */
+extern void lapb_kick(struct lapb_cb *lapb);
+extern void lapb_transmit_buffer(struct lapb_cb *lapb, struct sk_buff *, int);
+extern void lapb_establish_data_link(struct lapb_cb *lapb);
+extern void lapb_enquiry_response(struct lapb_cb *lapb);
+extern void lapb_timeout_response(struct lapb_cb *lapb);
+extern void lapb_check_iframes_acked(struct lapb_cb *lapb, unsigned short);
+extern void lapb_check_need_response(struct lapb_cb *lapb, int, int);
+
+/* lapb_subr.c */
+extern void lapb_clear_queues(struct lapb_cb *lapb);
+extern void lapb_frames_acked(struct lapb_cb *lapb, unsigned short);
+extern void lapb_requeue_frames(struct lapb_cb *lapb);
+extern int  lapb_validate_nr(struct lapb_cb *lapb, unsigned short);
+extern int lapb_decode(struct lapb_cb *lapb, struct sk_buff *, struct lapb_frame *);
+extern void lapb_send_control(struct lapb_cb *lapb, int, int, int);
+extern void lapb_transmit_frmr(struct lapb_cb *lapb);
+
+/* lapb_timer.c */
+extern void lapb_start_t1timer(struct lapb_cb *lapb);
+extern void lapb_start_t2timer(struct lapb_cb *lapb);
+extern void lapb_stop_t1timer(struct lapb_cb *lapb);
+extern void lapb_stop_t2timer(struct lapb_cb *lapb);
+extern int  lapb_t1timer_running(struct lapb_cb *lapb);
+
+/*
+ * Debug levels.
+ *	0 = Off
+ *	1 = State Changes
+ *	2 = Packets I/O and State Changes
+ *	3 = Hex dumps, Packets I/O and State Changes.
+ */
+#define	LAPB_DEBUG	0
+
+#endif
diff --git a/include/net/llc.h b/include/net/llc.h
new file mode 100644
index 000000000000..c9aed2a8b4e2
--- /dev/null
+++ b/include/net/llc.h
@@ -0,0 +1,99 @@
+#ifndef LLC_H
+#define LLC_H
+/*
+ * Copyright (c) 1997 by Procom Technology, Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct net_device;
+struct packet_type;
+struct sk_buff;
+
+struct llc_addr {
+	unsigned char lsap;
+	unsigned char mac[IFHWADDRLEN];
+};
+
+#define LLC_SAP_STATE_INACTIVE	1
+#define LLC_SAP_STATE_ACTIVE	2
+
+/**
+ * struct llc_sap - Defines the SAP component
+ *
+ * @station - station this sap belongs to
+ * @state - sap state
+ * @p_bit - only lowest-order bit used
+ * @f_bit - only lowest-order bit used
+ * @laddr - SAP value in this 'lsap'
+ * @node - entry in station sap_list
+ * @sk_list - LLC sockets this one manages
+ */
+struct llc_sap {
+	unsigned char	 state;
+	unsigned char	 p_bit;
+	unsigned char	 f_bit;
+	int		 (*rcv_func)(struct sk_buff *skb,
+				     struct net_device *dev,
+				     struct packet_type *pt);
+	struct llc_addr	 laddr;
+	struct list_head node;
+	struct {
+		rwlock_t	  lock;
+		struct hlist_head list;
+	} sk_list;
+};
+
+#define LLC_DEST_INVALID         0      /* Invalid LLC PDU type */
+#define LLC_DEST_SAP             1      /* Type 1 goes here */
+#define LLC_DEST_CONN            2      /* Type 2 goes here */
+
+extern struct list_head llc_sap_list;
+extern rwlock_t llc_sap_list_lock;
+extern unsigned char llc_station_mac_sa[ETH_ALEN];
+
+extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
+		   struct packet_type *pt);
+
+extern int llc_mac_hdr_init(struct sk_buff *skb,
+			    unsigned char *sa, unsigned char *da);
+
+extern void llc_add_pack(int type, void (*handler)(struct llc_sap *sap,
+						   struct sk_buff *skb));
+extern void llc_remove_pack(int type);
+
+extern void llc_set_station_handler(void (*handler)(struct sk_buff *skb));
+
+extern struct llc_sap *llc_sap_open(unsigned char lsap,
+				    int (*rcv)(struct sk_buff *skb,
+					       struct net_device *dev,
+					       struct packet_type *pt));
+extern void llc_sap_close(struct llc_sap *sap);
+
+extern struct llc_sap *llc_sap_find(unsigned char sap_value);
+
+extern int llc_build_and_send_ui_pkt(struct llc_sap *sap, struct sk_buff *skb,
+				     unsigned char *dmac, unsigned char dsap);
+
+extern int llc_station_init(void);
+extern void llc_station_exit(void);
+
+#ifdef CONFIG_PROC_FS
+extern int llc_proc_init(void);
+extern void llc_proc_exit(void);
+#else
+#define llc_proc_init()	(0)
+#define llc_proc_exit()	do { } while(0)
+#endif /* CONFIG_PROC_FS */
+#endif /* LLC_H */
diff --git a/include/net/llc_c_ac.h b/include/net/llc_c_ac.h
new file mode 100644
index 000000000000..df83f69d2de4
--- /dev/null
+++ b/include/net/llc_c_ac.h
@@ -0,0 +1,202 @@
+#ifndef LLC_C_AC_H
+#define LLC_C_AC_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Connection component state transition actions */
+/*
+ * Connection state transition actions
+ * (Fb = F bit; Pb = P bit; Xb = X bit)
+ */
+#define LLC_CONN_AC_CLR_REMOTE_BUSY			 1
+#define LLC_CONN_AC_CONN_IND				 2
+#define LLC_CONN_AC_CONN_CONFIRM			 3
+#define LLC_CONN_AC_DATA_IND				 4
+#define LLC_CONN_AC_DISC_IND				 5
+#define LLC_CONN_AC_RESET_IND				 6
+#define LLC_CONN_AC_RESET_CONFIRM			 7
+#define LLC_CONN_AC_REPORT_STATUS			 8
+#define LLC_CONN_AC_CLR_REMOTE_BUSY_IF_Fb_EQ_1		 9
+#define LLC_CONN_AC_STOP_REJ_TMR_IF_DATA_FLAG_EQ_2	10
+#define LLC_CONN_AC_SEND_DISC_CMD_Pb_SET_X		11
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_Pb		12
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_1		13
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_F_FLAG		14
+#define LLC_CONN_AC_SEND_FRMR_RSP_Fb_SET_X		15
+#define LLC_CONN_AC_RESEND_FRMR_RSP_Fb_SET_0		16
+#define LLC_CONN_AC_RESEND_FRMR_RSP_Fb_SET_Pb		17
+#define LLC_CONN_AC_SEND_I_CMD_Pb_SET_1			18
+#define LLC_CONN_AC_RESEND_I_CMD_Pb_SET_1		19
+#define LLC_CONN_AC_RESEND_I_CMD_Pb_SET_1_OR_SEND_RR	20
+#define LLC_CONN_AC_SEND_I_XXX_Xb_SET_0			21
+#define LLC_CONN_AC_RESEND_I_XXX_Xb_SET_0		22
+#define LLC_CONN_AC_RESEND_I_XXX_Xb_SET_0_OR_SEND_RR	23
+#define LLC_CONN_AC_RESEND_I_RSP_Fb_SET_1		24
+#define LLC_CONN_AC_SEND_REJ_CMD_Pb_SET_1		25
+#define LLC_CONN_AC_SEND_REJ_RSP_Fb_SET_1		26
+#define LLC_CONN_AC_SEND_REJ_XXX_Xb_SET_0		27
+#define LLC_CONN_AC_SEND_RNR_CMD_Pb_SET_1		28
+#define LLC_CONN_AC_SEND_RNR_RSP_Fb_SET_1		29
+#define LLC_CONN_AC_SEND_RNR_XXX_Xb_SET_0		30
+#define LLC_CONN_AC_SET_REMOTE_BUSY			31
+#define LLC_CONN_AC_OPTIONAL_SEND_RNR_XXX_Xb_SET_0	32
+#define LLC_CONN_AC_SEND_RR_CMD_Pb_SET_1		33
+#define LLC_CONN_AC_SEND_ACK_CMD_Pb_SET_1		34
+#define LLC_CONN_AC_SEND_RR_RSP_Fb_SET_1		35
+#define LLC_CONN_AC_SEND_ACK_RSP_Fb_SET_1		36
+#define LLC_CONN_AC_SEND_RR_XXX_Xb_SET_0		37
+#define LLC_CONN_AC_SEND_ACK_XXX_Xb_SET_0		38
+#define LLC_CONN_AC_SEND_SABME_CMD_Pb_SET_X		39
+#define LLC_CONN_AC_SEND_UA_RSP_Fb_SET_Pb		40
+#define LLC_CONN_AC_SEND_UA_RSP_Fb_SET_F_FLAG		41
+#define LLC_CONN_AC_S_FLAG_SET_0			42
+#define LLC_CONN_AC_S_FLAG_SET_1			43
+#define LLC_CONN_AC_START_P_TMR				44
+#define LLC_CONN_AC_START_ACK_TMR			45
+#define LLC_CONN_AC_START_REJ_TMR			46
+#define LLC_CONN_AC_START_ACK_TMR_IF_NOT_RUNNING	47
+#define LLC_CONN_AC_STOP_ACK_TMR			48
+#define LLC_CONN_AC_STOP_P_TMR				49
+#define LLC_CONN_AC_STOP_REJ_TMR			50
+#define LLC_CONN_AC_STOP_ALL_TMRS			51
+#define LLC_CONN_AC_STOP_OTHER_TMRS			52
+#define LLC_CONN_AC_UPDATE_Nr_RECEIVED			53
+#define LLC_CONN_AC_UPDATE_P_FLAG			54
+#define LLC_CONN_AC_DATA_FLAG_SET_2			55
+#define LLC_CONN_AC_DATA_FLAG_SET_0			56
+#define LLC_CONN_AC_DATA_FLAG_SET_1			57
+#define LLC_CONN_AC_DATA_FLAG_SET_1_IF_DATA_FLAG_EQ_0	58
+#define LLC_CONN_AC_P_FLAG_SET_0			59
+#define LLC_CONN_AC_P_FLAG_SET_P			60
+#define LLC_CONN_AC_REMOTE_BUSY_SET_0			61
+#define LLC_CONN_AC_RETRY_CNT_SET_0			62
+#define LLC_CONN_AC_RETRY_CNT_INC_BY_1			63
+#define LLC_CONN_AC_Vr_SET_0				64
+#define LLC_CONN_AC_Vr_INC_BY_1				65
+#define LLC_CONN_AC_Vs_SET_0				66
+#define LLC_CONN_AC_Vs_SET_Nr				67
+#define LLC_CONN_AC_F_FLAG_SET_P			68
+#define LLC_CONN_AC_STOP_SENDACK_TMR			70
+#define LLC_CONN_AC_START_SENDACK_TMR_IF_NOT_RUNNING	71
+
+typedef int (*llc_conn_action_t)(struct sock *sk, struct sk_buff *skb);
+
+extern int llc_conn_ac_clear_remote_busy(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ac_conn_ind(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ac_conn_confirm(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_data_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_disc_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_confirm(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_clear_remote_busy_if_f_eq_1(struct sock* sk,
+						   struct sk_buff *skb);
+extern int llc_conn_ac_stop_rej_tmr_if_data_flag_eq_2(struct sock* sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ac_send_disc_cmd_p_set_x(struct sock* sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ac_send_dm_rsp_f_set_p(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_dm_rsp_f_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock* sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock* sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock* sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ac_send_i_cmd_p_set_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_xxx_x_set_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock* sk,
+						       struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_cmd_p_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_set_remote_busy(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock* sk,
+						struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_cmd_p_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_rsp_f_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_ack_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_xxx_x_set_0(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_ack_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock* sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ac_send_ua_rsp_f_set_p(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_set_s_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_s_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_p_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_ack_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_rej_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_ack_tmr_if_not_running(struct sock* sk,
+						    struct sk_buff *skb);
+extern int llc_conn_ac_stop_ack_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_p_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_rej_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_all_timers(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_other_timers(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_nr_received(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_tx_win_size(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_dec_tx_win_size(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_p_flag(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_2(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_1_if_data_flag_eq_0(struct sock* sk,
+							 struct sk_buff *skb);
+extern int llc_conn_ac_set_p_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_remote_busy_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_retry_cnt_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_cause_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_cause_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_retry_cnt_by_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vr_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_vr_by_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vs_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vs_nr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_vs(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_vs(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_disc(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_reset(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_disc_confirm(struct sock* sk, struct sk_buff *skb);
+extern u8 llc_circular_between(u8 a, u8 b, u8 c);
+extern int llc_conn_ac_send_ack_if_needed(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_adjust_npta_by_rr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_adjust_npta_by_rnr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_sendack_flag(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_rsp_as_ack(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_as_ack(struct sock* sk, struct sk_buff *skb);
+
+extern void llc_conn_busy_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_pf_cycle_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_ack_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_rej_tmr_cb(unsigned long timeout_data);
+
+extern void llc_conn_set_p_flag(struct sock *sk, u8 value);
+#endif /* LLC_C_AC_H */
diff --git a/include/net/llc_c_ev.h b/include/net/llc_c_ev.h
new file mode 100644
index 000000000000..23a409381fa9
--- /dev/null
+++ b/include/net/llc_c_ev.h
@@ -0,0 +1,269 @@
+#ifndef LLC_C_EV_H
+#define LLC_C_EV_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ *		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <net/sock.h>
+
+/* Connection component state transition event qualifiers */
+/* Types of events (possible values in 'ev->type') */
+#define LLC_CONN_EV_TYPE_SIMPLE		 1
+#define LLC_CONN_EV_TYPE_CONDITION	 2
+#define LLC_CONN_EV_TYPE_PRIM		 3
+#define LLC_CONN_EV_TYPE_PDU		 4	/* command/response PDU */
+#define LLC_CONN_EV_TYPE_ACK_TMR	 5
+#define LLC_CONN_EV_TYPE_P_TMR		 6
+#define LLC_CONN_EV_TYPE_REJ_TMR	 7
+#define LLC_CONN_EV_TYPE_BUSY_TMR	 8
+#define LLC_CONN_EV_TYPE_RPT_STATUS	 9
+#define LLC_CONN_EV_TYPE_SENDACK_TMR	10
+
+#define NBR_CONN_EV		   5
+/* Connection events which cause state transitions when fully qualified */
+
+#define LLC_CONN_EV_CONN_REQ				 1
+#define LLC_CONN_EV_CONN_RESP				 2
+#define LLC_CONN_EV_DATA_REQ				 3
+#define LLC_CONN_EV_DISC_REQ				 4
+#define LLC_CONN_EV_RESET_REQ				 5
+#define LLC_CONN_EV_RESET_RESP				 6
+#define LLC_CONN_EV_LOCAL_BUSY_DETECTED			 7
+#define LLC_CONN_EV_LOCAL_BUSY_CLEARED			 8
+#define LLC_CONN_EV_RX_BAD_PDU				 9
+#define LLC_CONN_EV_RX_DISC_CMD_Pbit_SET_X		10
+#define LLC_CONN_EV_RX_DM_RSP_Fbit_SET_X		11
+#define LLC_CONN_EV_RX_FRMR_RSP_Fbit_SET_X		12
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X			13
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X_UNEXPD_Ns	14
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X_INVAL_Ns	15
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X			16
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X_UNEXPD_Ns	17
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X_INVAL_Ns	18
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_X		19
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_X		20
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_X		21
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_X		22
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_X		23
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_X		24
+#define LLC_CONN_EV_RX_SABME_CMD_Pbit_SET_X		25
+#define LLC_CONN_EV_RX_UA_RSP_Fbit_SET_X		26
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_X		27
+#define LLC_CONN_EV_RX_XXX_RSP_Fbit_SET_X		28
+#define LLC_CONN_EV_RX_XXX_YYY				29
+#define LLC_CONN_EV_RX_ZZZ_CMD_Pbit_SET_X_INVAL_Nr	30
+#define LLC_CONN_EV_RX_ZZZ_RSP_Fbit_SET_X_INVAL_Nr	31
+#define LLC_CONN_EV_P_TMR_EXP				32
+#define LLC_CONN_EV_ACK_TMR_EXP				33
+#define LLC_CONN_EV_REJ_TMR_EXP				34
+#define LLC_CONN_EV_BUSY_TMR_EXP			35
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_1		36
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_0		37
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_0_UNEXPD_Ns	38
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_0_UNEXPD_Ns	39
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_1_UNEXPD_Ns	40
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_1_UNEXPD_Ns	41
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_0			42
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_0			43
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_1			44
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_0		45
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_0		46
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_1		47
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_1		48
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_0		49
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_0		50
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_1		51
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_1		52
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_0		53
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_0		54
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_1		55
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_1			56
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_1		57
+#define LLC_CONN_EV_RX_XXX_RSP_Fbit_SET_1		58
+#define LLC_CONN_EV_TX_BUFF_FULL			59
+
+#define LLC_CONN_EV_INIT_P_F_CYCLE			100
+/*
+ * Connection event qualifiers; for some events a certain combination of
+ * these qualifiers must be TRUE before event recognized valid for state;
+ * these constants act as indexes into the Event Qualifier function
+ * table
+ */
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_1		 1
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_0		 2
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_2		 3
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_1		 4
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_0		 5
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_Fbit		 6
+#define LLC_CONN_EV_QFY_REMOTE_BUSY_EQ_0	 7
+#define LLC_CONN_EV_QFY_RETRY_CNT_LT_N2		 8
+#define LLC_CONN_EV_QFY_RETRY_CNT_GTE_N2	 9
+#define LLC_CONN_EV_QFY_S_FLAG_EQ_1		10
+#define LLC_CONN_EV_QFY_S_FLAG_EQ_0		11
+#define LLC_CONN_EV_QFY_INIT_P_F_CYCLE		12
+
+struct llc_conn_state_ev {
+	u8 type;
+	u8 prim;
+	u8 prim_type;
+	u8 reason;
+	u8 status;
+	u8 ind_prim;
+	u8 cfm_prim;
+};
+
+static __inline__ struct llc_conn_state_ev *llc_conn_ev(struct sk_buff *skb)
+{
+	return (struct llc_conn_state_ev *)skb->cb;
+}
+
+typedef int (*llc_conn_ev_t)(struct sock *sk, struct sk_buff *skb);
+typedef int (*llc_conn_ev_qfyr_t)(struct sock *sk, struct sk_buff *skb);
+
+extern int llc_conn_ev_conn_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_data_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_disc_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rst_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_local_busy_detected(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_local_busy_cleared(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rx_bad_pdu(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rx_disc_cmd_pbit_set_x(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_rx_dm_rsp_fbit_set_x(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_frmr_rsp_fbit_set_x(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_x_inval_ns(struct sock *sk,
+						    struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x_inval_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_sabme_cmd_pbit_set_x(struct sock *sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ev_rx_ua_rsp_fbit_set_x(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_cmd_pbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_rsp_fbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_zzz_cmd_pbit_set_x_inval_nr(struct sock *sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ev_rx_zzz_rsp_fbit_set_x_inval_nr(struct sock *sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ev_p_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_ack_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rej_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_busy_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_sendack_tmr_exp(struct sock *sk, struct sk_buff *skb);
+/* NOT_USED functions and their variations */
+extern int llc_conn_ev_rx_xxx_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_0_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_1_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_0_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_1_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_cmd_pbit_set_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_cmd_pbit_set_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_rsp_fbit_set_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_rsp_fbit_set_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_cmd_pbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_rsp_fbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_cmd_pbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_any_frame(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_tx_buffer_full(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_init_p_f_cycle(struct sock *sk, struct sk_buff *skb);
+
+/* Available connection action qualifiers */
+extern int llc_conn_ev_qlfy_data_flag_eq_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_data_flag_eq_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_data_flag_eq_2(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_1(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_last_frame_eq_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_last_frame_eq_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_0(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_f(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_remote_busy_eq_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_remote_busy_eq_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_retry_cnt_lt_n2(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_retry_cnt_gte_n2(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_s_flag_eq_1(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_s_flag_eq_0(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_cause_flag_eq_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_cause_flag_eq_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_conn(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_disc(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_failed(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_remote_busy(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_refuse(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_conflict(struct sock *sk,
+						struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_rst_done(struct sock *sk,
+						struct sk_buff *skb);
+
+static __inline__ int llc_conn_space(struct sock *sk, struct sk_buff *skb)
+{
+	return atomic_read(&sk->sk_rmem_alloc) + skb->truesize <
+	       (unsigned)sk->sk_rcvbuf;
+}
+#endif /* LLC_C_EV_H */
diff --git a/include/net/llc_c_st.h b/include/net/llc_c_st.h
new file mode 100644
index 000000000000..0e79cfba4b3b
--- /dev/null
+++ b/include/net/llc_c_st.h
@@ -0,0 +1,48 @@
+#ifndef LLC_C_ST_H
+#define LLC_C_ST_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ *		2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Connection component state management */
+/* connection states */
+#define LLC_CONN_OUT_OF_SVC		 0	/* prior to allocation */
+ 
+#define LLC_CONN_STATE_ADM		 1	/* disc, initial state */
+#define LLC_CONN_STATE_SETUP		 2	/* disconnected state */
+#define LLC_CONN_STATE_NORMAL		 3	/* connected state */
+#define LLC_CONN_STATE_BUSY		 4	/* connected state */
+#define LLC_CONN_STATE_REJ		 5	/* connected state */
+#define LLC_CONN_STATE_AWAIT		 6	/* connected state */
+#define LLC_CONN_STATE_AWAIT_BUSY	 7	/* connected state */
+#define LLC_CONN_STATE_AWAIT_REJ	 8	/* connected state */
+#define LLC_CONN_STATE_D_CONN		 9	/* disconnected state */
+#define LLC_CONN_STATE_RESET		10	/* disconnected state */
+#define LLC_CONN_STATE_ERROR		11	/* disconnected state */
+#define LLC_CONN_STATE_TEMP		12	/* disconnected state */
+
+#define NBR_CONN_STATES			12	/* size of state table */
+#define NO_STATE_CHANGE			100
+
+/* Connection state table structure */
+struct llc_conn_state_trans {
+	llc_conn_ev_t	   ev;
+	u8		   next_state;
+	llc_conn_ev_qfyr_t *ev_qualifiers;
+	llc_conn_action_t  *ev_actions;
+};
+
+struct llc_conn_state {
+	u8			    current_state;
+	struct llc_conn_state_trans **transitions;
+};
+
+extern struct llc_conn_state llc_conn_state_table[];
+#endif /* LLC_C_ST_H */
diff --git a/include/net/llc_conn.h b/include/net/llc_conn.h
new file mode 100644
index 000000000000..8ad3bc2c23d7
--- /dev/null
+++ b/include/net/llc_conn.h
@@ -0,0 +1,119 @@
+#ifndef LLC_CONN_H
+#define LLC_CONN_H
+/*
+ * Copyright (c) 1997 by Procom Technology, Inc.
+ * 		 2001, 2002 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#include <linux/timer.h>
+#include <net/llc_if.h>
+#include <net/sock.h>
+#include <linux/llc.h>
+
+#define LLC_EVENT                1
+#define LLC_PACKET               2
+
+#define LLC_P_TIME               2
+#define LLC_ACK_TIME             1
+#define LLC_REJ_TIME             3
+#define LLC_BUSY_TIME            3
+
+struct llc_timer {
+	struct timer_list timer;
+	u16		  expire;	/* timer expire time */
+};
+
+struct llc_sock {
+	/* struct sock must be the first member of llc_sock */
+	struct sock	    sk;
+	struct sockaddr_llc addr;		/* address sock is bound to */
+	u8		    state;		/* state of connection */
+	struct llc_sap	    *sap;		/* pointer to parent SAP */
+	struct llc_addr	    laddr;		/* lsap/mac pair */
+	struct llc_addr	    daddr;		/* dsap/mac pair */
+	struct net_device   *dev;		/* device to send to remote */
+	u8		    retry_count;	/* number of retries */
+	u8		    ack_must_be_send;
+	u8		    first_pdu_Ns;
+	u8		    npta;
+	struct llc_timer    ack_timer;
+	struct llc_timer    pf_cycle_timer;
+	struct llc_timer    rej_sent_timer;
+	struct llc_timer    busy_state_timer;	/* ind busy clr at remote LLC */
+	u8		    vS;			/* seq# next in-seq I-PDU tx'd*/
+	u8		    vR;			/* seq# next in-seq I-PDU rx'd*/
+	u32		    n2;			/* max nbr re-tx's for timeout*/
+	u32		    n1;			/* max nbr octets in I PDU */
+	u8		    k;			/* tx window size; max = 127 */
+	u8		    rw;			/* rx window size; max = 127 */
+	u8		    p_flag;		/* state flags */
+	u8		    f_flag;
+	u8		    s_flag;
+	u8		    data_flag;
+	u8		    remote_busy_flag;
+	u8		    cause_flag;
+	struct sk_buff_head pdu_unack_q;	/* PUDs sent/waiting ack */
+	u16		    link;		/* network layer link number */
+	u8		    X;			/* a temporary variable */
+	u8		    ack_pf;		/* this flag indicates what is
+						   the P-bit of acknowledge */
+	u8		    failed_data_req; /* recognize that already exist a
+						failed llc_data_req_handler
+						(tx_buffer_full or unacceptable
+						state */
+	u8		    dec_step;
+	u8		    inc_cntr;
+	u8		    dec_cntr;
+	u8		    connect_step;
+	u8		    last_nr;	   /* NR of last pdu received */
+	u32		    rx_pdu_hdr;	   /* used for saving header of last pdu
+					      received and caused sending FRMR.
+					      Used for resending FRMR */
+};
+
+static inline struct llc_sock *llc_sk(const struct sock *sk)
+{
+	return (struct llc_sock *)sk;
+}
+
+static __inline__ void llc_set_backlog_type(struct sk_buff *skb, char type)
+{
+	skb->cb[sizeof(skb->cb) - 1] = type;
+}
+
+static __inline__ char llc_backlog_type(struct sk_buff *skb)
+{
+	return skb->cb[sizeof(skb->cb) - 1];
+}
+
+extern struct sock *llc_sk_alloc(int family, int priority, struct proto *prot);
+extern void llc_sk_free(struct sock *sk);
+
+extern void llc_sk_reset(struct sock *sk);
+
+/* Access to a connection */
+extern int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr,
+					 u8 first_p_bit);
+extern void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr,
+					 u8 first_f_bit);
+extern int llc_conn_remove_acked_pdus(struct sock *conn, u8 nr,
+				      u16 *how_many_unacked);
+extern struct sock *llc_lookup_established(struct llc_sap *sap,
+					   struct llc_addr *daddr,
+					   struct llc_addr *laddr);
+extern void llc_sap_add_socket(struct llc_sap *sap, struct sock *sk);
+extern void llc_sap_remove_socket(struct llc_sap *sap, struct sock *sk);
+
+extern u8 llc_data_accept_state(u8 state);
+extern void llc_build_offset_table(void);
+extern int llc_release_sockets(struct llc_sap *sap);
+#endif /* LLC_CONN_H */
diff --git a/include/net/llc_if.h b/include/net/llc_if.h
new file mode 100644
index 000000000000..090eaa0d71f9
--- /dev/null
+++ b/include/net/llc_if.h
@@ -0,0 +1,101 @@
+#ifndef LLC_IF_H
+#define LLC_IF_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Defines LLC interface to network layer */
+/* Available primitives */
+#include <linux/if.h>
+#include <linux/if_arp.h>
+#include <linux/llc.h>
+#include <net/llc.h>
+
+#define LLC_DATAUNIT_PRIM	1
+#define LLC_CONN_PRIM		2
+#define LLC_DATA_PRIM		3
+#define LLC_DISC_PRIM		4
+#define LLC_RESET_PRIM		5
+#define LLC_FLOWCONTROL_PRIM	6 /* Not supported at this time */
+#define LLC_DISABLE_PRIM	7
+#define LLC_XID_PRIM		8
+#define LLC_TEST_PRIM		9
+#define LLC_SAP_ACTIVATION     10
+#define LLC_SAP_DEACTIVATION   11
+
+#define LLC_NBR_PRIMITIVES     11
+
+#define LLC_IND			1
+#define LLC_CONFIRM		2
+
+/* Primitive type */
+#define LLC_PRIM_TYPE_REQ	1
+#define LLC_PRIM_TYPE_IND	2
+#define LLC_PRIM_TYPE_RESP	3
+#define LLC_PRIM_TYPE_CONFIRM	4
+
+/* Reset reasons, remote entity or local LLC */
+#define LLC_RESET_REASON_REMOTE	1
+#define LLC_RESET_REASON_LOCAL	2
+
+/* Disconnect reasons */
+#define LLC_DISC_REASON_RX_DM_RSP_PDU	0
+#define LLC_DISC_REASON_RX_DISC_CMD_PDU	1
+#define LLC_DISC_REASON_ACK_TMR_EXP	2
+
+/* Confirm reasons */
+#define LLC_STATUS_CONN		0 /* connect confirm & reset confirm */
+#define LLC_STATUS_DISC		1 /* connect confirm & reset confirm */
+#define LLC_STATUS_FAILED	2 /* connect confirm & reset confirm */
+#define LLC_STATUS_IMPOSSIBLE	3 /* connect confirm */
+#define LLC_STATUS_RECEIVED	4 /* data conn */
+#define LLC_STATUS_REMOTE_BUSY	5 /* data conn */
+#define LLC_STATUS_REFUSE	6 /* data conn */
+#define LLC_STATUS_CONFLICT	7 /* disconnect conn */
+#define LLC_STATUS_RESET_DONE	8 /*  */
+
+extern u8 llc_mac_null_var[IFHWADDRLEN];
+
+/**
+ *      llc_mac_null - determines if a address is a null mac address
+ *      @mac: Mac address to test if null.
+ *
+ *      Determines if a given address is a null mac address.  Returns 0 if the
+ *      address is not a null mac, 1 if the address is a null mac.
+ */
+static __inline__ int llc_mac_null(u8 *mac)
+{
+	return !memcmp(mac, llc_mac_null_var, IFHWADDRLEN);
+}
+
+static __inline__ int llc_addrany(struct llc_addr *addr)
+{
+	return llc_mac_null(addr->mac) && !addr->lsap;
+}
+
+/**
+ *	llc_mac_match - determines if two mac addresses are the same
+ *	@mac1: First mac address to compare.
+ *	@mac2: Second mac address to compare.
+ *
+ *	Determines if two given mac address are the same.  Returns 0 if there
+ *	is not a complete match up to len, 1 if a complete match up to len is
+ *	found.
+ */
+static __inline__ int llc_mac_match(u8 *mac1, u8 *mac2)
+{
+	return !memcmp(mac1, mac2, IFHWADDRLEN);
+}
+
+extern int llc_establish_connection(struct sock *sk, u8 *lmac,
+				    u8 *dmac, u8 dsap);
+extern int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb);
+extern int llc_send_disc(struct sock *sk);
+#endif /* LLC_IF_H */
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
new file mode 100644
index 000000000000..f45c37d89cf7
--- /dev/null
+++ b/include/net/llc_pdu.h
@@ -0,0 +1,436 @@
+#ifndef LLC_PDU_H
+#define LLC_PDU_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/if_ether.h>
+#include <linux/if_tr.h>
+
+/* Lengths of frame formats */
+#define LLC_PDU_LEN_I	4       /* header and 2 control bytes */
+#define LLC_PDU_LEN_S	4
+#define LLC_PDU_LEN_U	3       /* header and 1 control byte */
+/* Known SAP addresses */
+#define LLC_GLOBAL_SAP	0xFF
+#define LLC_NULL_SAP	0x00	/* not network-layer visible */
+#define LLC_MGMT_INDIV	0x02	/* station LLC mgmt indiv addr */
+#define LLC_MGMT_GRP	0x03	/* station LLC mgmt group addr */
+#define LLC_RDE_SAP	0xA6	/* route ... */
+
+/* SAP field bit masks */
+#define LLC_ISO_RESERVED_SAP	0x02
+#define LLC_SAP_GROUP_DSAP	0x01
+#define LLC_SAP_RESP_SSAP	0x01
+
+/* Group/individual DSAP indicator is DSAP field */
+#define LLC_PDU_GROUP_DSAP_MASK    0x01
+#define LLC_PDU_IS_GROUP_DSAP(pdu)      \
+	((pdu->dsap & LLC_PDU_GROUP_DSAP_MASK) ? 0 : 1)
+#define LLC_PDU_IS_INDIV_DSAP(pdu)      \
+	(!(pdu->dsap & LLC_PDU_GROUP_DSAP_MASK) ? 0 : 1)
+
+/* Command/response PDU indicator in SSAP field */
+#define LLC_PDU_CMD_RSP_MASK	0x01
+#define LLC_PDU_CMD		0
+#define LLC_PDU_RSP		1
+#define LLC_PDU_IS_CMD(pdu)    ((pdu->ssap & LLC_PDU_RSP) ? 0 : 1)
+#define LLC_PDU_IS_RSP(pdu)    ((pdu->ssap & LLC_PDU_RSP) ? 1 : 0)
+
+/* Get PDU type from 2 lowest-order bits of control field first byte */
+#define LLC_PDU_TYPE_I_MASK    0x01	/* 16-bit control field */
+#define LLC_PDU_TYPE_S_MASK    0x03
+#define LLC_PDU_TYPE_U_MASK    0x03	/* 8-bit control field */
+#define LLC_PDU_TYPE_MASK      0x03
+
+#define LLC_PDU_TYPE_I	0	/* first bit */
+#define LLC_PDU_TYPE_S	1	/* first two bits */
+#define LLC_PDU_TYPE_U	3	/* first two bits */
+
+#define LLC_PDU_TYPE_IS_I(pdu) \
+	((!(pdu->ctrl_1 & LLC_PDU_TYPE_I_MASK)) ? 1 : 0)
+
+#define LLC_PDU_TYPE_IS_U(pdu) \
+	(((pdu->ctrl_1 & LLC_PDU_TYPE_U_MASK) == LLC_PDU_TYPE_U) ? 1 : 0)
+
+#define LLC_PDU_TYPE_IS_S(pdu) \
+	(((pdu->ctrl_1 & LLC_PDU_TYPE_S_MASK) == LLC_PDU_TYPE_S) ? 1 : 0)
+
+/* U-format PDU control field masks */
+#define LLC_U_PF_BIT_MASK      0x10	/* P/F bit mask */
+#define LLC_U_PF_IS_1(pdu)     ((pdu->ctrl_1 & LLC_U_PF_BIT_MASK) ? 1 : 0)
+#define LLC_U_PF_IS_0(pdu)     ((!(pdu->ctrl_1 & LLC_U_PF_BIT_MASK)) ? 1 : 0)
+
+#define LLC_U_PDU_CMD_MASK     0xEC	/* cmd/rsp mask */
+#define LLC_U_PDU_CMD(pdu)     (pdu->ctrl_1 & LLC_U_PDU_CMD_MASK)
+#define LLC_U_PDU_RSP(pdu)     (pdu->ctrl_1 & LLC_U_PDU_CMD_MASK)
+
+#define LLC_1_PDU_CMD_UI       0x00	/* Type 1 cmds/rsps */
+#define LLC_1_PDU_CMD_XID      0xAC
+#define LLC_1_PDU_CMD_TEST     0xE0
+
+#define LLC_2_PDU_CMD_SABME    0x6C	/* Type 2 cmds/rsps */
+#define LLC_2_PDU_CMD_DISC     0x40
+#define LLC_2_PDU_RSP_UA       0x60
+#define LLC_2_PDU_RSP_DM       0x0C
+#define LLC_2_PDU_RSP_FRMR     0x84
+
+/* Type 1 operations */
+
+/* XID information field bit masks */
+
+/* LLC format identifier (byte 1) */
+#define LLC_XID_FMT_ID		0x81	/* first byte must be this */
+
+/* LLC types/classes identifier (byte 2) */
+#define LLC_XID_CLASS_ZEROS_MASK	0xE0	/* these must be zeros */
+#define LLC_XID_CLASS_MASK		0x1F	/* AND with byte to get below */
+
+#define LLC_XID_NULL_CLASS_1	0x01	/* if NULL LSAP...use these */
+#define LLC_XID_NULL_CLASS_2	0x03
+#define LLC_XID_NULL_CLASS_3	0x05
+#define LLC_XID_NULL_CLASS_4	0x07
+
+#define LLC_XID_NNULL_TYPE_1	0x01	/* if non-NULL LSAP...use these */
+#define LLC_XID_NNULL_TYPE_2	0x02
+#define LLC_XID_NNULL_TYPE_3	0x04
+#define LLC_XID_NNULL_TYPE_1_2	0x03
+#define LLC_XID_NNULL_TYPE_1_3	0x05
+#define LLC_XID_NNULL_TYPE_2_3	0x06
+#define LLC_XID_NNULL_ALL		0x07
+
+/* Sender Receive Window (byte 3) */
+#define LLC_XID_RW_MASK	0xFE	/* AND with value to get below */
+
+#define LLC_XID_MIN_RW	0x02	/* lowest-order bit always zero */
+
+/* Type 2 operations */
+
+#define LLC_2_SEQ_NBR_MODULO   ((u8) 128)
+
+/* I-PDU masks ('ctrl' is I-PDU control word) */
+#define LLC_I_GET_NS(pdu)     (u8)((pdu->ctrl_1 & 0xFE) >> 1)
+#define LLC_I_GET_NR(pdu)     (u8)((pdu->ctrl_2 & 0xFE) >> 1)
+
+#define LLC_I_PF_BIT_MASK      0x01
+
+#define LLC_I_PF_IS_0(pdu)     ((!(pdu->ctrl_2 & LLC_I_PF_BIT_MASK)) ? 1 : 0)
+#define LLC_I_PF_IS_1(pdu)     ((pdu->ctrl_2 & LLC_I_PF_BIT_MASK) ? 1 : 0)
+
+/* S-PDU supervisory commands and responses */
+
+#define LLC_S_PDU_CMD_MASK     0x0C
+#define LLC_S_PDU_CMD(pdu)     (pdu->ctrl_1 & LLC_S_PDU_CMD_MASK)
+#define LLC_S_PDU_RSP(pdu)     (pdu->ctrl_1 & LLC_S_PDU_CMD_MASK)
+
+#define LLC_2_PDU_CMD_RR       0x00	/* rx ready cmd */
+#define LLC_2_PDU_RSP_RR       0x00	/* rx ready rsp */
+#define LLC_2_PDU_CMD_REJ      0x08	/* reject PDU cmd */
+#define LLC_2_PDU_RSP_REJ      0x08	/* reject PDU rsp */
+#define LLC_2_PDU_CMD_RNR      0x04	/* rx not ready cmd */
+#define LLC_2_PDU_RSP_RNR      0x04	/* rx not ready rsp */
+
+#define LLC_S_PF_BIT_MASK      0x01
+#define LLC_S_PF_IS_0(pdu)     ((!(pdu->ctrl_2 & LLC_S_PF_BIT_MASK)) ? 1 : 0)
+#define LLC_S_PF_IS_1(pdu)     ((pdu->ctrl_2 & LLC_S_PF_BIT_MASK) ? 1 : 0)
+
+#define PDU_SUPV_GET_Nr(pdu)   ((pdu->ctrl_2 & 0xFE) >> 1)
+#define PDU_GET_NEXT_Vr(sn)    (++sn & ~LLC_2_SEQ_NBR_MODULO)
+
+/* FRMR information field macros */
+
+#define FRMR_INFO_LENGTH       5	/* 5 bytes of information */
+
+/*
+ * info is pointer to FRMR info field structure; 'rej_ctrl' is byte pointer
+ * (if U-PDU) or word pointer to rejected PDU control field
+ */
+#define FRMR_INFO_SET_REJ_CNTRL(info,rej_ctrl) \
+	info->rej_pdu_ctrl = ((*((u8 *) rej_ctrl) & \
+				LLC_PDU_TYPE_U) != LLC_PDU_TYPE_U ? \
+				(u16)*((u16 *) rej_ctrl) : \
+				(((u16) *((u8 *) rej_ctrl)) & 0x00FF))
+
+/*
+ * Info is pointer to FRMR info field structure; 'vs' is a byte containing
+ * send state variable value in low-order 7 bits (insure the lowest-order
+ * bit remains zero (0))
+ */
+#define FRMR_INFO_SET_Vs(info,vs) (info->curr_ssv = (((u8) vs) << 1))
+#define FRMR_INFO_SET_Vr(info,vr) (info->curr_rsv = (((u8) vr) << 1))
+
+/*
+ * Info is pointer to FRMR info field structure; 'cr' is a byte containing
+ * the C/R bit value in the low-order bit
+ */
+#define FRMR_INFO_SET_C_R_BIT(info, cr)  (info->curr_rsv |= (((u8) cr) & 0x01))
+
+/*
+ * In the remaining five macros, 'info' is pointer to FRMR info field
+ * structure; 'ind' is a byte containing the bit value to set in the
+ * lowest-order bit)
+ */
+#define FRMR_INFO_SET_INVALID_PDU_CTRL_IND(info, ind) \
+       (info->ind_bits = ((info->ind_bits & 0xFE) | (((u8) ind) & 0x01)))
+
+#define FRMR_INFO_SET_INVALID_PDU_INFO_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xFD) | (((u8) ind) & 0x02)))
+
+#define FRMR_INFO_SET_PDU_INFO_2LONG_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xFB) | (((u8) ind) & 0x04)))
+
+#define FRMR_INFO_SET_PDU_INVALID_Nr_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xF7) | (((u8) ind) & 0x08)))
+
+#define FRMR_INFO_SET_PDU_INVALID_Ns_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xEF) | (((u8) ind) & 0x10)))
+
+/* Sequence-numbered PDU format (4 bytes in length) */
+struct llc_pdu_sn {
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl_1;
+	u8 ctrl_2;
+};
+
+static inline struct llc_pdu_sn *llc_pdu_sn_hdr(struct sk_buff *skb)
+{
+	return (struct llc_pdu_sn *)skb->nh.raw;
+}
+
+/* Un-numbered PDU format (3 bytes in length) */
+struct llc_pdu_un {
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl_1;
+};
+
+static inline struct llc_pdu_un *llc_pdu_un_hdr(struct sk_buff *skb)
+{
+	return (struct llc_pdu_un *)skb->nh.raw;
+}
+
+static inline void *llc_set_pdu_hdr(struct sk_buff *skb, void *ptr)
+{
+	return skb->nh.raw = ptr;
+}
+
+/**
+ *	llc_pdu_header_init - initializes pdu header
+ *	@skb: input skb that header must be set into it.
+ *	@type: type of PDU (U, I or S).
+ *	@ssap: source sap.
+ *	@dsap: destination sap.
+ *	@cr: command/response bit (0 or 1).
+ *
+ *	This function sets DSAP, SSAP and command/Response bit in LLC header.
+ */
+static inline void llc_pdu_header_init(struct sk_buff *skb, u8 type,
+				       u8 ssap, u8 dsap, u8 cr)
+{
+	const int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+	struct llc_pdu_un *pdu = llc_set_pdu_hdr(skb, skb_push(skb, hlen));
+	pdu->dsap = dsap;
+	pdu->ssap = ssap;
+	pdu->ssap |= cr;
+}
+
+/**
+ *	llc_pdu_decode_sa - extracs source address (MAC) of input frame
+ *	@skb: input skb that source address must be extracted from it.
+ *	@sa: pointer to source address (6 byte array).
+ *
+ *	This function extracts source address(MAC) of input frame.
+ */
+static inline void llc_pdu_decode_sa(struct sk_buff *skb, u8 *sa)
+{
+	if (skb->protocol == ntohs(ETH_P_802_2))
+		memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN);
+	else if (skb->protocol == ntohs(ETH_P_TR_802_2))
+		memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN);
+}
+
+/**
+ *	llc_pdu_decode_da - extracts dest address of input frame
+ *	@skb: input skb that destination address must be extracted from it
+ *	@sa: pointer to destination address (6 byte array).
+ *
+ *	This function extracts destination address(MAC) of input frame.
+ */
+static inline void llc_pdu_decode_da(struct sk_buff *skb, u8 *da)
+{
+	if (skb->protocol == ntohs(ETH_P_802_2))
+		memcpy(da, eth_hdr(skb)->h_dest, ETH_ALEN);
+	else if (skb->protocol == ntohs(ETH_P_TR_802_2))
+		memcpy(da, tr_hdr(skb)->daddr, ETH_ALEN);
+}
+
+/**
+ *	llc_pdu_decode_ssap - extracts source SAP of input frame
+ *	@skb: input skb that source SAP must be extracted from it.
+ *	@ssap: source SAP (output argument).
+ *
+ *	This function extracts source SAP of input frame. Right bit of SSAP is
+ *	command/response bit.
+ */
+static inline void llc_pdu_decode_ssap(struct sk_buff *skb, u8 *ssap)
+{
+	*ssap = llc_pdu_un_hdr(skb)->ssap & 0xFE;
+}
+
+/**
+ *	llc_pdu_decode_dsap - extracts dest SAP of input frame
+ *	@skb: input skb that destination SAP must be extracted from it.
+ *	@dsap: destination SAP (output argument).
+ *
+ *	This function extracts destination SAP of input frame. right bit of
+ *	DSAP designates individual/group SAP.
+ */
+static inline void llc_pdu_decode_dsap(struct sk_buff *skb, u8 *dsap)
+{
+	*dsap = llc_pdu_un_hdr(skb)->dsap & 0xFE;
+}
+
+/**
+ *	llc_pdu_init_as_ui_cmd - sets LLC header as UI PDU
+ *	@skb: input skb that header must be set into it.
+ *
+ *	This function sets third byte of LLC header as a UI PDU.
+ */
+static inline void llc_pdu_init_as_ui_cmd(struct sk_buff *skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_UI;
+}
+
+/**
+ *	llc_pdu_init_as_test_cmd - sets PDU as TEST
+ *	@skb - Address of the skb to build
+ *
+ * 	Sets a PDU as TEST
+ */
+static inline void llc_pdu_init_as_test_cmd(struct sk_buff *skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_TEST;
+	pdu->ctrl_1 |= LLC_U_PF_BIT_MASK;
+}
+
+/**
+ *	llc_pdu_init_as_test_rsp - build TEST response PDU
+ *	@skb: Address of the skb to build
+ *	@ev_skb: The received TEST command PDU frame
+ *
+ *	Builds a pdu frame as a TEST response.
+ */
+static inline void llc_pdu_init_as_test_rsp(struct sk_buff *skb,
+					    struct sk_buff *ev_skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_TEST;
+	pdu->ctrl_1 |= LLC_U_PF_BIT_MASK;
+	if (ev_skb->protocol == ntohs(ETH_P_802_2)) {
+		struct llc_pdu_un *ev_pdu = llc_pdu_un_hdr(ev_skb);
+		int dsize;
+
+		dsize = ntohs(eth_hdr(ev_skb)->h_proto) - 3;
+		memcpy(((u8 *)pdu) + 3, ((u8 *)ev_pdu) + 3, dsize);
+		skb_put(skb, dsize);
+	}
+}
+
+/* LLC Type 1 XID command/response information fields format */
+struct llc_xid_info {
+	u8 fmt_id;	/* always 0x18 for LLC */
+	u8 type;	/* different if NULL/non-NULL LSAP */
+	u8 rw;		/* sender receive window */
+};
+
+/**
+ *	llc_pdu_init_as_xid_cmd - sets bytes 3, 4 & 5 of LLC header as XID
+ *	@skb: input skb that header must be set into it.
+ *
+ *	This function sets third,fourth,fifth and sixth bytes of LLC header as
+ *	a XID PDU.
+ */
+static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
+					   u8 svcs_supported, u8 rx_window)
+{
+	struct llc_xid_info *xid_info;
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1	 = LLC_PDU_TYPE_U;
+	pdu->ctrl_1	|= LLC_1_PDU_CMD_XID;
+	pdu->ctrl_1	|= LLC_U_PF_BIT_MASK;
+	xid_info	 = (struct llc_xid_info *)(((u8 *)&pdu->ctrl_1) + 1);
+	xid_info->fmt_id = LLC_XID_FMT_ID;	/* 0x81 */
+	xid_info->type	 = svcs_supported;
+	xid_info->rw	 = rx_window << 1;	/* size of receive window */
+	skb_put(skb, 3);
+}
+
+/**
+ *	llc_pdu_init_as_xid_rsp - builds XID response PDU
+ *	@skb: Address of the skb to build
+ *	@svcs_supported: The class of the LLC (I or II)
+ *	@rx_window: The size of the receive window of the LLC
+ *
+ *	Builds a pdu frame as an XID response.
+ */
+static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb,
+					   u8 svcs_supported, u8 rx_window)
+{
+	struct llc_xid_info *xid_info;
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1	 = LLC_PDU_TYPE_U;
+	pdu->ctrl_1	|= LLC_1_PDU_CMD_XID;
+	pdu->ctrl_1	|= LLC_U_PF_BIT_MASK;
+
+	xid_info	 = (struct llc_xid_info *)(((u8 *)&pdu->ctrl_1) + 1);
+	xid_info->fmt_id = LLC_XID_FMT_ID;
+	xid_info->type	 = svcs_supported;
+	xid_info->rw	 = rx_window << 1;
+	skb_put(skb, 3);
+}
+
+/* LLC Type 2 FRMR response information field format */
+struct llc_frmr_info {
+	u16 rej_pdu_ctrl;	/* bits 1-8 if U-PDU */
+	u8  curr_ssv;		/* current send state variable val */
+	u8  curr_rsv;		/* current receive state variable */
+	u8  ind_bits;		/* indicator bits set with macro */
+};
+
+extern void llc_pdu_set_cmd_rsp(struct sk_buff *skb, u8 type);
+extern void llc_pdu_set_pf_bit(struct sk_buff *skb, u8 bit_value);
+extern void llc_pdu_decode_pf_bit(struct sk_buff *skb, u8 *pf_bit);
+extern void llc_pdu_init_as_disc_cmd(struct sk_buff *skb, u8 p_bit);
+extern void llc_pdu_init_as_i_cmd(struct sk_buff *skb, u8 p_bit, u8 ns, u8 nr);
+extern void llc_pdu_init_as_rej_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_rnr_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_rr_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_sabme_cmd(struct sk_buff *skb, u8 p_bit);
+extern void llc_pdu_init_as_dm_rsp(struct sk_buff *skb, u8 f_bit);
+extern void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb,
+				     struct llc_pdu_sn *prev_pdu,
+				     u8 f_bit, u8 vs, u8 vr, u8 vzyxw);
+extern void llc_pdu_init_as_rr_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_rej_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_rnr_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_ua_rsp(struct sk_buff *skb, u8 f_bit);
+#endif /* LLC_PDU_H */
diff --git a/include/net/llc_s_ac.h b/include/net/llc_s_ac.h
new file mode 100644
index 000000000000..37a3bbd02394
--- /dev/null
+++ b/include/net/llc_s_ac.h
@@ -0,0 +1,39 @@
+#ifndef LLC_S_AC_H
+#define LLC_S_AC_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* SAP component actions */
+#define SAP_ACT_UNITDATA_IND	1
+#define SAP_ACT_SEND_UI		2
+#define SAP_ACT_SEND_XID_C	3
+#define SAP_ACT_SEND_XID_R	4
+#define SAP_ACT_SEND_TEST_C	5
+#define SAP_ACT_SEND_TEST_R	6
+#define SAP_ACT_REPORT_STATUS	7
+#define SAP_ACT_XID_IND		8
+#define SAP_ACT_TEST_IND	9
+
+/* All action functions must look like this */
+typedef int (*llc_sap_action_t)(struct llc_sap *sap, struct sk_buff *skb);
+
+extern int llc_sap_action_unitdata_ind(struct llc_sap *sap,
+				       struct sk_buff *skb);
+extern int llc_sap_action_send_ui(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_xid_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_test_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_report_status(struct llc_sap *sap,
+					struct sk_buff *skb);
+extern int llc_sap_action_xid_ind(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_test_ind(struct llc_sap *sap, struct sk_buff *skb);
+#endif /* LLC_S_AC_H */
diff --git a/include/net/llc_s_ev.h b/include/net/llc_s_ev.h
new file mode 100644
index 000000000000..e3acb9329e4a
--- /dev/null
+++ b/include/net/llc_s_ev.h
@@ -0,0 +1,67 @@
+#ifndef LLC_S_EV_H
+#define LLC_S_EV_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/skbuff.h>
+
+/* Defines SAP component events */
+/* Types of events (possible values in 'ev->type') */
+#define LLC_SAP_EV_TYPE_SIMPLE		1
+#define LLC_SAP_EV_TYPE_CONDITION	2
+#define LLC_SAP_EV_TYPE_PRIM		3
+#define LLC_SAP_EV_TYPE_PDU		4   /* command/response PDU */
+#define LLC_SAP_EV_TYPE_ACK_TMR		5
+#define LLC_SAP_EV_TYPE_RPT_STATUS	6
+
+#define LLC_SAP_EV_ACTIVATION_REQ	 1
+#define LLC_SAP_EV_RX_UI		 2
+#define LLC_SAP_EV_UNITDATA_REQ		 3
+#define LLC_SAP_EV_XID_REQ		 4
+#define LLC_SAP_EV_RX_XID_C		 5
+#define LLC_SAP_EV_RX_XID_R		 6
+#define LLC_SAP_EV_TEST_REQ		 7
+#define LLC_SAP_EV_RX_TEST_C		 8
+#define LLC_SAP_EV_RX_TEST_R		 9
+#define LLC_SAP_EV_DEACTIVATION_REQ	10
+
+struct llc_sap_state_ev {
+	u8		prim;
+	u8		prim_type;
+	u8		type;
+	u8		reason;
+	u8		ind_cfm_flag;
+	struct llc_addr saddr;
+	struct llc_addr daddr;
+};
+
+static __inline__ struct llc_sap_state_ev *llc_sap_ev(struct sk_buff *skb)
+{
+	return (struct llc_sap_state_ev *)skb->cb;
+}
+
+struct llc_sap;
+
+typedef int (*llc_sap_ev_t)(struct llc_sap *sap, struct sk_buff *skb);
+
+extern int llc_sap_ev_activation_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_ui(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_unitdata_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_xid_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_xid_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_xid_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_test_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_test_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_test_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_deactivation_req(struct llc_sap *sap,
+				       struct sk_buff *skb);
+#endif /* LLC_S_EV_H */
diff --git a/include/net/llc_s_st.h b/include/net/llc_s_st.h
new file mode 100644
index 000000000000..567c681f1f3e
--- /dev/null
+++ b/include/net/llc_s_st.h
@@ -0,0 +1,32 @@
+#ifndef LLC_S_ST_H
+#define LLC_S_ST_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#define LLC_NR_SAP_STATES	2       /* size of state table */
+
+/* structures and types */
+/* SAP state table structure */
+struct llc_sap_state_trans {
+	llc_sap_ev_t	  ev;
+	u8		  next_state;
+	llc_sap_action_t *ev_actions;
+};
+
+struct llc_sap_state {
+	u8			   curr_state;
+	struct llc_sap_state_trans **transitions;
+};
+
+/* only access to SAP state table */
+extern struct llc_sap_state llc_sap_state_table[LLC_NR_SAP_STATES];
+#endif /* LLC_S_ST_H */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
new file mode 100644
index 000000000000..353baaa627f3
--- /dev/null
+++ b/include/net/llc_sap.h
@@ -0,0 +1,29 @@
+#ifndef LLC_SAP_H
+#define LLC_SAP_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+struct llc_sap;
+struct sk_buff;
+
+extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
+extern void llc_save_primitive(struct sk_buff* skb, unsigned char prim);
+extern struct sk_buff *llc_alloc_frame(void);
+
+extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
+				        struct sk_buff *skb,
+					unsigned char *dmac,
+					unsigned char dsap);
+extern void llc_build_and_send_xid_pkt(struct llc_sap *sap,
+				       struct sk_buff *skb,
+				       unsigned char *dmac,
+				       unsigned char dsap);
+#endif /* LLC_SAP_H */
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
new file mode 100644
index 000000000000..f85d6e4b7442
--- /dev/null
+++ b/include/net/ndisc.h
@@ -0,0 +1,135 @@
+#ifndef _NDISC_H
+#define _NDISC_H
+
+/*
+ *	ICMP codes for neighbour discovery messages
+ */
+
+#define NDISC_ROUTER_SOLICITATION	133
+#define NDISC_ROUTER_ADVERTISEMENT	134
+#define NDISC_NEIGHBOUR_SOLICITATION	135
+#define NDISC_NEIGHBOUR_ADVERTISEMENT	136
+#define NDISC_REDIRECT			137
+
+/*
+ *	ndisc options
+ */
+
+enum {
+	__ND_OPT_PREFIX_INFO_END = 0,
+	ND_OPT_SOURCE_LL_ADDR = 1,	/* RFC2461 */
+	ND_OPT_TARGET_LL_ADDR = 2,	/* RFC2461 */
+	ND_OPT_PREFIX_INFO = 3,		/* RFC2461 */
+	ND_OPT_REDIRECT_HDR = 4,	/* RFC2461 */
+	ND_OPT_MTU = 5,			/* RFC2461 */
+	__ND_OPT_MAX
+};
+
+#define MAX_RTR_SOLICITATION_DELAY	HZ
+
+#define ND_REACHABLE_TIME		(30*HZ)
+#define ND_RETRANS_TIMER		HZ
+
+#define ND_MIN_RANDOM_FACTOR		(1/2)
+#define ND_MAX_RANDOM_FACTOR		(3/2)
+
+#ifdef __KERNEL__
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/icmpv6.h>
+#include <net/neighbour.h>
+#include <asm/atomic.h>
+
+extern struct neigh_table nd_tbl;
+
+struct nd_msg {
+        struct icmp6hdr	icmph;
+        struct in6_addr	target;
+	__u8		opt[0];
+};
+
+struct rs_msg {
+	struct icmp6hdr	icmph;
+	__u8		opt[0];
+};
+
+struct ra_msg {
+        struct icmp6hdr		icmph;
+	__u32			reachable_time;
+	__u32			retrans_timer;
+};
+
+struct nd_opt_hdr {
+	__u8		nd_opt_type;
+	__u8		nd_opt_len;
+} __attribute__((__packed__));
+
+
+extern int			ndisc_init(struct net_proto_family *ops);
+
+extern void			ndisc_cleanup(void);
+
+extern int			ndisc_rcv(struct sk_buff *skb);
+
+extern void			ndisc_send_ns(struct net_device *dev,
+					      struct neighbour *neigh,
+					      struct in6_addr *solicit,
+					      struct in6_addr *daddr,
+					      struct in6_addr *saddr);
+
+extern void			ndisc_send_rs(struct net_device *dev,
+					      struct in6_addr *saddr,
+					      struct in6_addr *daddr);
+
+extern void			ndisc_forwarding_on(void);
+extern void			ndisc_forwarding_off(void);
+
+extern void			ndisc_send_redirect(struct sk_buff *skb,
+						    struct neighbour *neigh,
+						    struct in6_addr *target);
+
+extern int			ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir);
+
+
+struct rt6_info *		dflt_rt_lookup(void);
+
+/*
+ *	IGMP
+ */
+extern int			igmp6_init(struct net_proto_family *ops);
+
+extern void			igmp6_cleanup(void);
+
+extern int			igmp6_event_query(struct sk_buff *skb);
+
+extern int			igmp6_event_report(struct sk_buff *skb);
+
+extern void			igmp6_cleanup(void);
+
+#ifdef CONFIG_SYSCTL
+extern int 			ndisc_ifinfo_sysctl_change(ctl_table *ctl,
+							   int write,
+							   struct file * filp,
+							   void __user *buffer,
+							   size_t *lenp,
+							   loff_t *ppos);
+#endif
+
+extern void 			inet6_ifinfo_notify(int event,
+						    struct inet6_dev *idev);
+
+static inline struct neighbour * ndisc_get_neigh(struct net_device *dev, struct in6_addr *addr)
+{
+
+	if (dev)
+		return __neigh_lookup(&nd_tbl, addr, dev, 1);
+
+	return NULL;
+}
+
+
+#endif /* __KERNEL__ */
+
+
+#endif
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
new file mode 100644
index 000000000000..4f33bbc21e7f
--- /dev/null
+++ b/include/net/neighbour.h
@@ -0,0 +1,370 @@
+#ifndef _NET_NEIGHBOUR_H
+#define _NET_NEIGHBOUR_H
+
+/*
+ *	Generic neighbour manipulation
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>
+ *	Alexey Kuznetsov	<kuznet@ms2.inr.ac.ru>
+ *
+ * 	Changes:
+ *
+ *	Harald Welte:		<laforge@gnumonks.org>
+ *		- Add neighbour cache statistics like rtstat
+ */
+
+/* The following flags & states are exported to user space,
+   so that they should be moved to include/linux/ directory.
+ */
+
+/*
+ *	Neighbor Cache Entry Flags
+ */
+
+#define NTF_PROXY	0x08	/* == ATF_PUBL */
+#define NTF_ROUTER	0x80
+
+/*
+ *	Neighbor Cache Entry States.
+ */
+
+#define NUD_INCOMPLETE	0x01
+#define NUD_REACHABLE	0x02
+#define NUD_STALE	0x04
+#define NUD_DELAY	0x08
+#define NUD_PROBE	0x10
+#define NUD_FAILED	0x20
+
+/* Dummy states */
+#define NUD_NOARP	0x40
+#define NUD_PERMANENT	0x80
+#define NUD_NONE	0x00
+
+/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
+   and make no address resolution or NUD.
+   NUD_PERMANENT is also cannot be deleted by garbage collectors.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/rcupdate.h>
+#include <linux/seq_file.h>
+
+#include <linux/err.h>
+#include <linux/sysctl.h>
+
+#define NUD_IN_TIMER	(NUD_INCOMPLETE|NUD_REACHABLE|NUD_DELAY|NUD_PROBE)
+#define NUD_VALID	(NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE|NUD_PROBE|NUD_STALE|NUD_DELAY)
+#define NUD_CONNECTED	(NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE)
+
+struct neighbour;
+
+struct neigh_parms
+{
+	struct neigh_parms *next;
+	int	(*neigh_setup)(struct neighbour *);
+	struct neigh_table *tbl;
+	int	entries;
+	void	*priv;
+
+	void	*sysctl_table;
+
+	int dead;
+	atomic_t refcnt;
+	struct rcu_head rcu_head;
+
+	int	base_reachable_time;
+	int	retrans_time;
+	int	gc_staletime;
+	int	reachable_time;
+	int	delay_probe_time;
+
+	int	queue_len;
+	int	ucast_probes;
+	int	app_probes;
+	int	mcast_probes;
+	int	anycast_delay;
+	int	proxy_delay;
+	int	proxy_qlen;
+	int	locktime;
+};
+
+struct neigh_statistics
+{
+	unsigned long allocs;		/* number of allocated neighs */
+	unsigned long destroys;		/* number of destroyed neighs */
+	unsigned long hash_grows;	/* number of hash resizes */
+
+	unsigned long res_failed;	/* nomber of failed resolutions */
+
+	unsigned long lookups;		/* number of lookups */
+	unsigned long hits;		/* number of hits (among lookups) */
+
+	unsigned long rcv_probes_mcast;	/* number of received mcast ipv6 */
+	unsigned long rcv_probes_ucast; /* number of received ucast ipv6 */
+
+	unsigned long periodic_gc_runs;	/* number of periodic GC runs */
+	unsigned long forced_gc_runs;	/* number of forced GC runs */
+};
+
+#define NEIGH_CACHE_STAT_INC(tbl, field)				\
+	do {								\
+		preempt_disable();					\
+		(per_cpu_ptr((tbl)->stats, smp_processor_id())->field)++; \
+		preempt_enable();					\
+	} while (0)
+
+struct neighbour
+{
+	struct neighbour	*next;
+	struct neigh_table	*tbl;
+	struct neigh_parms	*parms;
+	struct net_device		*dev;
+	unsigned long		used;
+	unsigned long		confirmed;
+	unsigned long		updated;
+	__u8			flags;
+	__u8			nud_state;
+	__u8			type;
+	__u8			dead;
+	atomic_t		probes;
+	rwlock_t		lock;
+	unsigned char		ha[(MAX_ADDR_LEN+sizeof(unsigned long)-1)&~(sizeof(unsigned long)-1)];
+	struct hh_cache		*hh;
+	atomic_t		refcnt;
+	int			(*output)(struct sk_buff *skb);
+	struct sk_buff_head	arp_queue;
+	struct timer_list	timer;
+	struct neigh_ops	*ops;
+	u8			primary_key[0];
+};
+
+struct neigh_ops
+{
+	int			family;
+	void			(*destructor)(struct neighbour *);
+	void			(*solicit)(struct neighbour *, struct sk_buff*);
+	void			(*error_report)(struct neighbour *, struct sk_buff*);
+	int			(*output)(struct sk_buff*);
+	int			(*connected_output)(struct sk_buff*);
+	int			(*hh_output)(struct sk_buff*);
+	int			(*queue_xmit)(struct sk_buff*);
+};
+
+struct pneigh_entry
+{
+	struct pneigh_entry	*next;
+	struct net_device		*dev;
+	u8			key[0];
+};
+
+/*
+ *	neighbour table manipulation
+ */
+
+
+struct neigh_table
+{
+	struct neigh_table	*next;
+	int			family;
+	int			entry_size;
+	int			key_len;
+	__u32			(*hash)(const void *pkey, const struct net_device *);
+	int			(*constructor)(struct neighbour *);
+	int			(*pconstructor)(struct pneigh_entry *);
+	void			(*pdestructor)(struct pneigh_entry *);
+	void			(*proxy_redo)(struct sk_buff *skb);
+	char			*id;
+	struct neigh_parms	parms;
+	/* HACK. gc_* shoul follow parms without a gap! */
+	int			gc_interval;
+	int			gc_thresh1;
+	int			gc_thresh2;
+	int			gc_thresh3;
+	unsigned long		last_flush;
+	struct timer_list 	gc_timer;
+	struct timer_list 	proxy_timer;
+	struct sk_buff_head	proxy_queue;
+	atomic_t		entries;
+	rwlock_t		lock;
+	unsigned long		last_rand;
+	struct neigh_parms	*parms_list;
+	kmem_cache_t		*kmem_cachep;
+	struct neigh_statistics	*stats;
+	struct neighbour	**hash_buckets;
+	unsigned int		hash_mask;
+	__u32			hash_rnd;
+	unsigned int		hash_chain_gc;
+	struct pneigh_entry	**phash_buckets;
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry	*pde;
+#endif
+};
+
+/* flags for neigh_update() */
+#define NEIGH_UPDATE_F_OVERRIDE			0x00000001
+#define NEIGH_UPDATE_F_WEAK_OVERRIDE		0x00000002
+#define NEIGH_UPDATE_F_OVERRIDE_ISROUTER	0x00000004
+#define NEIGH_UPDATE_F_ISROUTER			0x40000000
+#define NEIGH_UPDATE_F_ADMIN			0x80000000
+
+extern void			neigh_table_init(struct neigh_table *tbl);
+extern int			neigh_table_clear(struct neigh_table *tbl);
+extern struct neighbour *	neigh_lookup(struct neigh_table *tbl,
+					     const void *pkey,
+					     struct net_device *dev);
+extern struct neighbour *	neigh_lookup_nodev(struct neigh_table *tbl,
+						   const void *pkey);
+extern struct neighbour *	neigh_create(struct neigh_table *tbl,
+					     const void *pkey,
+					     struct net_device *dev);
+extern void			neigh_destroy(struct neighbour *neigh);
+extern int			__neigh_event_send(struct neighbour *neigh, struct sk_buff *skb);
+extern int			neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, 
+					     u32 flags);
+extern void			neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev);
+extern int			neigh_ifdown(struct neigh_table *tbl, struct net_device *dev);
+extern int			neigh_resolve_output(struct sk_buff *skb);
+extern int			neigh_connected_output(struct sk_buff *skb);
+extern int			neigh_compat_output(struct sk_buff *skb);
+extern struct neighbour 	*neigh_event_ns(struct neigh_table *tbl,
+						u8 *lladdr, void *saddr,
+						struct net_device *dev);
+
+extern struct neigh_parms	*neigh_parms_alloc(struct net_device *dev, struct neigh_table *tbl);
+extern void			neigh_parms_release(struct neigh_table *tbl, struct neigh_parms *parms);
+extern void			neigh_parms_destroy(struct neigh_parms *parms);
+extern unsigned long		neigh_rand_reach_time(unsigned long base);
+
+extern void			pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
+					       struct sk_buff *skb);
+extern struct pneigh_entry	*pneigh_lookup(struct neigh_table *tbl, const void *key, struct net_device *dev, int creat);
+extern int			pneigh_delete(struct neigh_table *tbl, const void *key, struct net_device *dev);
+
+struct netlink_callback;
+struct nlmsghdr;
+extern int neigh_dump_info(struct sk_buff *skb, struct netlink_callback *cb);
+extern int neigh_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int neigh_delete(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern void neigh_app_ns(struct neighbour *n);
+
+extern void neigh_for_each(struct neigh_table *tbl, void (*cb)(struct neighbour *, void *), void *cookie);
+extern void __neigh_for_each_release(struct neigh_table *tbl, int (*cb)(struct neighbour *));
+extern void pneigh_for_each(struct neigh_table *tbl, void (*cb)(struct pneigh_entry *));
+
+struct neigh_seq_state {
+	struct neigh_table *tbl;
+	void *(*neigh_sub_iter)(struct neigh_seq_state *state,
+				struct neighbour *n, loff_t *pos);
+	unsigned int bucket;
+	unsigned int flags;
+#define NEIGH_SEQ_NEIGH_ONLY	0x00000001
+#define NEIGH_SEQ_IS_PNEIGH	0x00000002
+#define NEIGH_SEQ_SKIP_NOARP	0x00000004
+};
+extern void *neigh_seq_start(struct seq_file *, loff_t *, struct neigh_table *, unsigned int);
+extern void *neigh_seq_next(struct seq_file *, void *, loff_t *);
+extern void neigh_seq_stop(struct seq_file *, void *);
+
+extern int			neigh_sysctl_register(struct net_device *dev, 
+						      struct neigh_parms *p,
+						      int p_id, int pdev_id,
+						      char *p_name,
+						      proc_handler *proc_handler,
+						      ctl_handler *strategy);
+extern void			neigh_sysctl_unregister(struct neigh_parms *p);
+
+static inline void __neigh_parms_put(struct neigh_parms *parms)
+{
+	atomic_dec(&parms->refcnt);
+}
+
+static inline void neigh_parms_put(struct neigh_parms *parms)
+{
+	if (atomic_dec_and_test(&parms->refcnt))
+		neigh_parms_destroy(parms);
+}
+
+static inline struct neigh_parms *neigh_parms_clone(struct neigh_parms *parms)
+{
+	atomic_inc(&parms->refcnt);
+	return parms;
+}
+
+/*
+ *	Neighbour references
+ */
+
+static inline void neigh_release(struct neighbour *neigh)
+{
+	if (atomic_dec_and_test(&neigh->refcnt))
+		neigh_destroy(neigh);
+}
+
+static inline struct neighbour * neigh_clone(struct neighbour *neigh)
+{
+	if (neigh)
+		atomic_inc(&neigh->refcnt);
+	return neigh;
+}
+
+#define neigh_hold(n)	atomic_inc(&(n)->refcnt)
+
+static inline void neigh_confirm(struct neighbour *neigh)
+{
+	if (neigh)
+		neigh->confirmed = jiffies;
+}
+
+static inline int neigh_is_connected(struct neighbour *neigh)
+{
+	return neigh->nud_state&NUD_CONNECTED;
+}
+
+static inline int neigh_is_valid(struct neighbour *neigh)
+{
+	return neigh->nud_state&NUD_VALID;
+}
+
+static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
+{
+	neigh->used = jiffies;
+	if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
+		return __neigh_event_send(neigh, skb);
+	return 0;
+}
+
+static inline struct neighbour *
+__neigh_lookup(struct neigh_table *tbl, const void *pkey, struct net_device *dev, int creat)
+{
+	struct neighbour *n = neigh_lookup(tbl, pkey, dev);
+
+	if (n || !creat)
+		return n;
+
+	n = neigh_create(tbl, pkey, dev);
+	return IS_ERR(n) ? NULL : n;
+}
+
+static inline struct neighbour *
+__neigh_lookup_errno(struct neigh_table *tbl, const void *pkey,
+  struct net_device *dev)
+{
+	struct neighbour *n = neigh_lookup(tbl, pkey, dev);
+
+	if (n)
+		return n;
+
+	return neigh_create(tbl, pkey, dev);
+}
+
+#define LOCALLY_ENQUEUED -2
+
+#endif
+#endif
+
+
diff --git a/include/net/netrom.h b/include/net/netrom.h
new file mode 100644
index 000000000000..45f2c7616d8b
--- /dev/null
+++ b/include/net/netrom.h
@@ -0,0 +1,242 @@
+/*
+ *	Declarations of NET/ROM type objects.
+ *
+ *	Jonathan Naylor G4KLX	9/4/95
+ */
+
+#ifndef _NETROM_H
+#define _NETROM_H 
+#include <linux/netrom.h>
+#include <linux/list.h>
+#include <net/sock.h>
+
+#define	NR_NETWORK_LEN			15
+#define	NR_TRANSPORT_LEN		5
+
+#define	NR_PROTO_IP			0x0C
+
+#define	NR_PROTOEXT			0x00
+#define	NR_CONNREQ			0x01
+#define	NR_CONNACK			0x02
+#define	NR_DISCREQ			0x03
+#define	NR_DISCACK			0x04
+#define	NR_INFO				0x05
+#define	NR_INFOACK			0x06
+
+#define	NR_CHOKE_FLAG			0x80
+#define	NR_NAK_FLAG			0x40
+#define	NR_MORE_FLAG			0x20
+
+/* Define Link State constants. */
+enum {
+	NR_STATE_0,
+	NR_STATE_1,
+	NR_STATE_2,
+	NR_STATE_3
+};
+
+#define	NR_COND_ACK_PENDING		0x01
+#define	NR_COND_REJECT			0x02
+#define	NR_COND_PEER_RX_BUSY		0x04
+#define	NR_COND_OWN_RX_BUSY		0x08
+
+#define NR_DEFAULT_T1			(120 * HZ)	/* Outstanding frames - 120 seconds */
+#define NR_DEFAULT_T2			(5   * HZ)	/* Response delay     - 5 seconds */
+#define NR_DEFAULT_N2			3		/* Number of Retries - 3 */
+#define	NR_DEFAULT_T4			(180 * HZ)	/* Busy Delay - 180 seconds */
+#define	NR_DEFAULT_IDLE			(0 * 60 * HZ)	/* No Activity Timeout - none */
+#define	NR_DEFAULT_WINDOW		4		/* Default Window Size - 4 */
+#define	NR_DEFAULT_OBS			6		/* Default Obsolescence Count - 6 */
+#define	NR_DEFAULT_QUAL			10		/* Default Neighbour Quality - 10 */
+#define	NR_DEFAULT_TTL			16		/* Default Time To Live - 16 */
+#define	NR_DEFAULT_ROUTING		1		/* Is routing enabled ? */
+#define	NR_DEFAULT_FAILS		2		/* Link fails until route fails */
+
+#define NR_MODULUS 			256
+#define NR_MAX_WINDOW_SIZE		127			/* Maximum Window Allowable - 127 */
+#define	NR_MAX_PACKET_SIZE		236			/* Maximum Packet Length - 236 */
+
+struct nr_sock {
+	struct sock		sock;
+	ax25_address		user_addr, source_addr, dest_addr;
+	struct net_device		*device;
+	unsigned char		my_index,   my_id;
+	unsigned char		your_index, your_id;
+	unsigned char		state, condition, bpqext, window;
+	unsigned short		vs, vr, va, vl;
+	unsigned char		n2, n2count;
+	unsigned long		t1, t2, t4, idle;
+	unsigned short		fraglen;
+	struct timer_list	t1timer;
+	struct timer_list	t2timer;
+	struct timer_list	t4timer;
+	struct timer_list	idletimer;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	reseq_queue;
+	struct sk_buff_head	frag_queue;
+};
+
+#define nr_sk(sk) ((struct nr_sock *)(sk))
+
+struct nr_neigh {
+	struct hlist_node	neigh_node;
+	ax25_address		callsign;
+	ax25_digi		*digipeat;
+	ax25_cb			*ax25;
+	struct net_device	*dev;
+	unsigned char		quality;
+	unsigned char		locked;
+	unsigned short		count;
+	unsigned int		number;
+	unsigned char		failed;
+	atomic_t		refcount;
+};
+
+struct nr_route {
+	unsigned char   quality;
+	unsigned char   obs_count;
+	struct nr_neigh *neighbour;
+};
+
+struct nr_node {
+	struct hlist_node	node_node;
+	ax25_address		callsign;
+	char			mnemonic[7];
+	unsigned char		which;
+	unsigned char		count;
+	struct nr_route		routes[3];
+	atomic_t		refcount;
+	spinlock_t		node_lock;
+};
+
+/*********************************************************************
+ *	nr_node & nr_neigh lists, refcounting and locking
+ *********************************************************************/
+
+#define nr_node_hold(__nr_node) \
+	atomic_inc(&((__nr_node)->refcount))
+
+static __inline__ void nr_node_put(struct nr_node *nr_node)
+{
+	if (atomic_dec_and_test(&nr_node->refcount)) {
+		kfree(nr_node);
+	}
+}
+
+#define nr_neigh_hold(__nr_neigh) \
+	atomic_inc(&((__nr_neigh)->refcount))
+
+static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
+{
+	if (atomic_dec_and_test(&nr_neigh->refcount)) {
+		if (nr_neigh->digipeat != NULL)
+			kfree(nr_neigh->digipeat);
+		kfree(nr_neigh);
+	}
+}
+
+/* nr_node_lock and nr_node_unlock also hold/put the node's refcounter.
+ */
+static __inline__ void nr_node_lock(struct nr_node *nr_node)
+{
+	nr_node_hold(nr_node);
+	spin_lock_bh(&nr_node->node_lock);
+}
+
+static __inline__ void nr_node_unlock(struct nr_node *nr_node)
+{
+	spin_unlock_bh(&nr_node->node_lock);
+	nr_node_put(nr_node);
+}
+
+#define nr_neigh_for_each(__nr_neigh, node, list) \
+	hlist_for_each_entry(__nr_neigh, node, list, neigh_node)
+
+#define nr_neigh_for_each_safe(__nr_neigh, node, node2, list) \
+	hlist_for_each_entry_safe(__nr_neigh, node, node2, list, neigh_node)
+
+#define nr_node_for_each(__nr_node, node, list) \
+	hlist_for_each_entry(__nr_node, node, list, node_node)
+
+#define nr_node_for_each_safe(__nr_node, node, node2, list) \
+	hlist_for_each_entry_safe(__nr_node, node, node2, list, node_node)
+
+
+/*********************************************************************/
+
+/* af_netrom.c */
+extern int  sysctl_netrom_default_path_quality;
+extern int  sysctl_netrom_obsolescence_count_initialiser;
+extern int  sysctl_netrom_network_ttl_initialiser;
+extern int  sysctl_netrom_transport_timeout;
+extern int  sysctl_netrom_transport_maximum_tries;
+extern int  sysctl_netrom_transport_acknowledge_delay;
+extern int  sysctl_netrom_transport_busy_delay;
+extern int  sysctl_netrom_transport_requested_window_size;
+extern int  sysctl_netrom_transport_no_activity_timeout;
+extern int  sysctl_netrom_routing_control;
+extern int  sysctl_netrom_link_fails_count;
+extern int  nr_rx_frame(struct sk_buff *, struct net_device *);
+extern void nr_destroy_socket(struct sock *);
+
+/* nr_dev.c */
+extern int  nr_rx_ip(struct sk_buff *, struct net_device *);
+extern void nr_setup(struct net_device *);
+
+/* nr_in.c */
+extern int  nr_process_rx_frame(struct sock *, struct sk_buff *);
+
+/* nr_loopback.c */
+extern void nr_loopback_init(void);
+extern void nr_loopback_clear(void);
+extern int  nr_loopback_queue(struct sk_buff *);
+
+/* nr_out.c */
+extern void nr_output(struct sock *, struct sk_buff *);
+extern void nr_send_nak_frame(struct sock *);
+extern void nr_kick(struct sock *);
+extern void nr_transmit_buffer(struct sock *, struct sk_buff *);
+extern void nr_establish_data_link(struct sock *);
+extern void nr_enquiry_response(struct sock *);
+extern void nr_check_iframes_acked(struct sock *, unsigned short);
+
+/* nr_route.c */
+extern void nr_rt_device_down(struct net_device *);
+extern struct net_device *nr_dev_first(void);
+extern struct net_device *nr_dev_get(ax25_address *);
+extern int  nr_rt_ioctl(unsigned int, void __user *);
+extern void nr_link_failed(ax25_cb *, int);
+extern int  nr_route_frame(struct sk_buff *, ax25_cb *);
+extern struct file_operations nr_nodes_fops;
+extern struct file_operations nr_neigh_fops;
+extern void nr_rt_free(void);
+
+/* nr_subr.c */
+extern void nr_clear_queues(struct sock *);
+extern void nr_frames_acked(struct sock *, unsigned short);
+extern void nr_requeue_frames(struct sock *);
+extern int  nr_validate_nr(struct sock *, unsigned short);
+extern int  nr_in_rx_window(struct sock *, unsigned short);
+extern void nr_write_internal(struct sock *, int);
+extern void nr_transmit_refusal(struct sk_buff *, int);
+extern void nr_disconnect(struct sock *, int);
+
+/* nr_timer.c */
+extern void nr_init_timers(struct sock *sk);
+extern void nr_start_heartbeat(struct sock *);
+extern void nr_start_t1timer(struct sock *);
+extern void nr_start_t2timer(struct sock *);
+extern void nr_start_t4timer(struct sock *);
+extern void nr_start_idletimer(struct sock *);
+extern void nr_stop_heartbeat(struct sock *);
+extern void nr_stop_t1timer(struct sock *);
+extern void nr_stop_t2timer(struct sock *);
+extern void nr_stop_t4timer(struct sock *);
+extern void nr_stop_idletimer(struct sock *);
+extern int  nr_t1timer_running(struct sock *);
+
+/* sysctl_net_netrom.c */
+extern void nr_register_sysctl(void);
+extern void nr_unregister_sysctl(void);
+
+#endif
diff --git a/include/net/p8022.h b/include/net/p8022.h
new file mode 100644
index 000000000000..3c99a86c3581
--- /dev/null
+++ b/include/net/p8022.h
@@ -0,0 +1,10 @@
+#ifndef _NET_P8022_H
+#define _NET_P8022_H
+extern struct datalink_proto *
+	register_8022_client(unsigned char type,
+			     int (*func)(struct sk_buff *skb,
+					 struct net_device *dev,
+					 struct packet_type *pt));
+extern void unregister_8022_client(struct datalink_proto *proto);
+
+#endif
diff --git a/include/net/pkt_act.h b/include/net/pkt_act.h
new file mode 100644
index 000000000000..bd08964b72c0
--- /dev/null
+++ b/include/net/pkt_act.h
@@ -0,0 +1,275 @@
+#ifndef __NET_PKT_ACT_H
+#define __NET_PKT_ACT_H
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/bitops.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/in.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <net/sock.h>
+#include <net/pkt_sched.h>
+
+#define tca_st(val) (struct tcf_##val *)
+#define PRIV(a,name) ( tca_st(name) (a)->priv)
+
+#if 0 /* control */
+#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
+#else
+#define DPRINTK(format,args...)
+#endif
+
+#if 0 /* data */
+#define D2PRINTK(format,args...) printk(KERN_DEBUG format,##args)
+#else
+#define D2PRINTK(format,args...)
+#endif
+
+static __inline__ unsigned
+tcf_hash(u32 index)
+{
+	return index & MY_TAB_MASK;
+}
+
+/* probably move this from being inline
+ * and put into act_generic
+*/
+static inline void
+tcf_hash_destroy(struct tcf_st *p)
+{
+	unsigned h = tcf_hash(p->index);
+	struct tcf_st **p1p;
+
+	for (p1p = &tcf_ht[h]; *p1p; p1p = &(*p1p)->next) {
+		if (*p1p == p) {
+			write_lock_bh(&tcf_t_lock);
+			*p1p = p->next;
+			write_unlock_bh(&tcf_t_lock);
+#ifdef CONFIG_NET_ESTIMATOR
+			gen_kill_estimator(&p->bstats, &p->rate_est);
+#endif
+			kfree(p);
+			return;
+		}
+	}
+	BUG_TRAP(0);
+}
+
+static inline int
+tcf_hash_release(struct tcf_st *p, int bind )
+{
+	int ret = 0;
+	if (p) {
+		if (bind) {
+			p->bindcnt--;
+		}
+		p->refcnt--;
+	       	if(p->bindcnt <=0 && p->refcnt <= 0) {
+			tcf_hash_destroy(p);
+			ret = 1;
+		}
+	}
+	return ret;
+}
+
+static __inline__ int
+tcf_dump_walker(struct sk_buff *skb, struct netlink_callback *cb,
+		struct tc_action *a)
+{
+	struct tcf_st *p;
+	int err =0, index =  -1,i= 0, s_i = 0, n_i = 0;
+	struct rtattr *r ;
+
+	read_lock(&tcf_t_lock);
+
+	s_i = cb->args[0];
+
+	for (i = 0; i < MY_TAB_SIZE; i++) {
+		p = tcf_ht[tcf_hash(i)];
+
+		for (; p; p = p->next) {
+			index++;
+			if (index < s_i)
+				continue;
+			a->priv = p;
+			a->order = n_i;
+			r = (struct rtattr*) skb->tail;
+			RTA_PUT(skb, a->order, 0, NULL);
+			err = tcf_action_dump_1(skb, a, 0, 0);
+			if (0 > err) {
+				index--;
+				skb_trim(skb, (u8*)r - skb->data);
+				goto done;
+			}
+			r->rta_len = skb->tail - (u8*)r;
+			n_i++;
+			if (n_i >= TCA_ACT_MAX_PRIO) {
+				goto done;
+			}
+		}
+	}
+done:
+	read_unlock(&tcf_t_lock);
+	if (n_i)
+		cb->args[0] += n_i;
+	return n_i;
+
+rtattr_failure:
+	skb_trim(skb, (u8*)r - skb->data);
+	goto done;
+}
+
+static __inline__ int
+tcf_del_walker(struct sk_buff *skb, struct tc_action *a)
+{
+	struct tcf_st *p, *s_p;
+	struct rtattr *r ;
+	int i= 0, n_i = 0;
+
+	r = (struct rtattr*) skb->tail;
+	RTA_PUT(skb, a->order, 0, NULL);
+	RTA_PUT(skb, TCA_KIND, IFNAMSIZ, a->ops->kind);
+	for (i = 0; i < MY_TAB_SIZE; i++) {
+		p = tcf_ht[tcf_hash(i)];
+
+		while (p != NULL) {
+			s_p = p->next;
+			if (ACT_P_DELETED == tcf_hash_release(p, 0)) {
+				 module_put(a->ops->owner);
+			}
+			n_i++;
+			p = s_p;
+		}
+	}
+	RTA_PUT(skb, TCA_FCNT, 4, &n_i);
+	r->rta_len = skb->tail - (u8*)r;
+
+	return n_i;
+rtattr_failure:
+	skb_trim(skb, (u8*)r - skb->data);
+	return -EINVAL;
+}
+
+static __inline__ int
+tcf_generic_walker(struct sk_buff *skb, struct netlink_callback *cb, int type,
+		struct tc_action *a)
+{
+		if (type == RTM_DELACTION) {
+			return tcf_del_walker(skb,a);
+		} else if (type == RTM_GETACTION) {
+			return tcf_dump_walker(skb,cb,a);
+		} else {
+			printk("tcf_generic_walker: unknown action %d\n",type);
+			return -EINVAL;
+		}
+}
+
+static __inline__ struct tcf_st *
+tcf_hash_lookup(u32 index)
+{
+	struct tcf_st *p;
+
+	read_lock(&tcf_t_lock);
+	for (p = tcf_ht[tcf_hash(index)]; p; p = p->next) {
+		if (p->index == index)
+			break;
+	}
+	read_unlock(&tcf_t_lock);
+	return p;
+}
+
+static __inline__ u32
+tcf_hash_new_index(void)
+{
+	do {
+		if (++idx_gen == 0)
+			idx_gen = 1;
+	} while (tcf_hash_lookup(idx_gen));
+
+	return idx_gen;
+}
+
+
+static inline int
+tcf_hash_search(struct tc_action *a, u32 index)
+{
+	struct tcf_st *p = tcf_hash_lookup(index);
+
+	if (p != NULL) {
+		a->priv = p;
+		return 1;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_NET_ACT_INIT
+static inline struct tcf_st *
+tcf_hash_check(u32 index, struct tc_action *a, int ovr, int bind)
+{
+	struct tcf_st *p = NULL;
+	if (index && (p = tcf_hash_lookup(index)) != NULL) {
+		if (bind) {
+			p->bindcnt++;
+			p->refcnt++;
+		}
+		a->priv = p;
+	}
+	return p;
+}
+
+static inline struct tcf_st *
+tcf_hash_create(u32 index, struct rtattr *est, struct tc_action *a, int size, int ovr, int bind)
+{
+	struct tcf_st *p = NULL;
+
+	p = kmalloc(size, GFP_KERNEL);
+	if (p == NULL)
+		return p;
+
+	memset(p, 0, size);
+	p->refcnt = 1;
+
+	if (bind) {
+		p->bindcnt = 1;
+	}
+
+	spin_lock_init(&p->lock);
+	p->stats_lock = &p->lock;
+	p->index = index ? : tcf_hash_new_index();
+	p->tm.install = jiffies;
+	p->tm.lastuse = jiffies;
+#ifdef CONFIG_NET_ESTIMATOR
+	if (est)
+		gen_new_estimator(&p->bstats, &p->rate_est, p->stats_lock, est);
+#endif
+	a->priv = (void *) p;
+	return p;
+}
+
+static inline void tcf_hash_insert(struct tcf_st *p)
+{
+	unsigned h = tcf_hash(p->index);
+
+	write_lock_bh(&tcf_t_lock);
+	p->next = tcf_ht[h];
+	tcf_ht[h] = p;
+	write_unlock_bh(&tcf_t_lock);
+}
+
+#endif
+
+#endif
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
new file mode 100644
index 000000000000..4abda6aec05a
--- /dev/null
+++ b/include/net/pkt_cls.h
@@ -0,0 +1,366 @@
+#ifndef __NET_PKT_CLS_H
+#define __NET_PKT_CLS_H
+
+#include <linux/pkt_cls.h>
+#include <net/sch_generic.h>
+#include <net/act_api.h>
+
+/* Basic packet classifier frontend definitions. */
+
+struct tcf_walker
+{
+	int	stop;
+	int	skip;
+	int	count;
+	int	(*fn)(struct tcf_proto *, unsigned long node, struct tcf_walker *);
+};
+
+extern int register_tcf_proto_ops(struct tcf_proto_ops *ops);
+extern int unregister_tcf_proto_ops(struct tcf_proto_ops *ops);
+
+static inline unsigned long
+__cls_set_class(unsigned long *clp, unsigned long cl)
+{
+	unsigned long old_cl;
+ 
+	old_cl = *clp;
+	*clp = cl;
+	return old_cl;
+}
+
+static inline unsigned long
+cls_set_class(struct tcf_proto *tp, unsigned long *clp, 
+	unsigned long cl)
+{
+	unsigned long old_cl;
+	
+	tcf_tree_lock(tp);
+	old_cl = __cls_set_class(clp, cl);
+	tcf_tree_unlock(tp);
+ 
+	return old_cl;
+}
+
+static inline void
+tcf_bind_filter(struct tcf_proto *tp, struct tcf_result *r, unsigned long base)
+{
+	unsigned long cl;
+
+	cl = tp->q->ops->cl_ops->bind_tcf(tp->q, base, r->classid);
+	cl = cls_set_class(tp, &r->class, cl);
+	if (cl)
+		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
+}
+
+static inline void
+tcf_unbind_filter(struct tcf_proto *tp, struct tcf_result *r)
+{
+	unsigned long cl;
+
+	if ((cl = __cls_set_class(&r->class, 0)) != 0)
+		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
+}
+
+struct tcf_exts
+{
+#ifdef CONFIG_NET_CLS_ACT
+	struct tc_action *action;
+#elif defined CONFIG_NET_CLS_POLICE
+	struct tcf_police *police;
+#endif
+};
+
+/* Map to export classifier specific extension TLV types to the
+ * generic extensions API. Unsupported extensions must be set to 0.
+ */
+struct tcf_ext_map
+{
+	int action;
+	int police;
+};
+
+/**
+ * tcf_exts_is_predicative - check if a predicative extension is present
+ * @exts: tc filter extensions handle
+ *
+ * Returns 1 if a predicative extension is present, i.e. an extension which
+ * might cause further actions and thus overrule the regular tcf_result.
+ */
+static inline int
+tcf_exts_is_predicative(struct tcf_exts *exts)
+{
+#ifdef CONFIG_NET_CLS_ACT
+	return !!exts->action;
+#elif defined CONFIG_NET_CLS_POLICE
+	return !!exts->police;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * tcf_exts_is_available - check if at least one extension is present
+ * @exts: tc filter extensions handle
+ *
+ * Returns 1 if at least one extension is present.
+ */
+static inline int
+tcf_exts_is_available(struct tcf_exts *exts)
+{
+	/* All non-predicative extensions must be added here. */
+	return tcf_exts_is_predicative(exts);
+}
+
+/**
+ * tcf_exts_exec - execute tc filter extensions
+ * @skb: socket buffer
+ * @exts: tc filter extensions handle
+ * @res: desired result
+ *
+ * Executes all configured extensions. Returns 0 on a normal execution,
+ * a negative number if the filter must be considered unmatched or
+ * a positive action code (TC_ACT_*) which must be returned to the
+ * underlying layer.
+ */
+static inline int
+tcf_exts_exec(struct sk_buff *skb, struct tcf_exts *exts,
+	       struct tcf_result *res)
+{
+#ifdef CONFIG_NET_CLS_ACT
+	if (exts->action)
+		return tcf_action_exec(skb, exts->action, res);
+#elif defined CONFIG_NET_CLS_POLICE
+	if (exts->police)
+		return tcf_police(skb, exts->police);
+#endif
+
+	return 0;
+}
+
+extern int tcf_exts_validate(struct tcf_proto *tp, struct rtattr **tb,
+	                     struct rtattr *rate_tlv, struct tcf_exts *exts,
+	                     struct tcf_ext_map *map);
+extern void tcf_exts_destroy(struct tcf_proto *tp, struct tcf_exts *exts);
+extern void tcf_exts_change(struct tcf_proto *tp, struct tcf_exts *dst,
+	                     struct tcf_exts *src);
+extern int tcf_exts_dump(struct sk_buff *skb, struct tcf_exts *exts,
+	                 struct tcf_ext_map *map);
+extern int tcf_exts_dump_stats(struct sk_buff *skb, struct tcf_exts *exts,
+	                       struct tcf_ext_map *map);
+
+/**
+ * struct tcf_pkt_info - packet information
+ */
+struct tcf_pkt_info
+{
+	unsigned char *		ptr;
+	int			nexthdr;
+};
+
+#ifdef CONFIG_NET_EMATCH
+
+struct tcf_ematch_ops;
+
+/**
+ * struct tcf_ematch - extended match (ematch)
+ * 
+ * @matchid: identifier to allow userspace to reidentify a match
+ * @flags: flags specifying attributes and the relation to other matches
+ * @ops: the operations lookup table of the corresponding ematch module
+ * @datalen: length of the ematch specific configuration data
+ * @data: ematch specific data
+ */
+struct tcf_ematch
+{
+	struct tcf_ematch_ops * ops;
+	unsigned long		data;
+	unsigned int		datalen;
+	u16			matchid;
+	u16			flags;
+};
+
+static inline int tcf_em_is_container(struct tcf_ematch *em)
+{
+	return !em->ops;
+}
+
+static inline int tcf_em_is_simple(struct tcf_ematch *em)
+{
+	return em->flags & TCF_EM_SIMPLE;
+}
+
+static inline int tcf_em_is_inverted(struct tcf_ematch *em)
+{
+	return em->flags & TCF_EM_INVERT;
+}
+
+static inline int tcf_em_last_match(struct tcf_ematch *em)
+{
+	return (em->flags & TCF_EM_REL_MASK) == TCF_EM_REL_END;
+}
+
+static inline int tcf_em_early_end(struct tcf_ematch *em, int result)
+{
+	if (tcf_em_last_match(em))
+		return 1;
+
+	if (result == 0 && em->flags & TCF_EM_REL_AND)
+		return 1;
+
+	if (result != 0 && em->flags & TCF_EM_REL_OR)
+		return 1;
+
+	return 0;
+}
+	
+/**
+ * struct tcf_ematch_tree - ematch tree handle
+ *
+ * @hdr: ematch tree header supplied by userspace
+ * @matches: array of ematches
+ */
+struct tcf_ematch_tree
+{
+	struct tcf_ematch_tree_hdr hdr;
+	struct tcf_ematch *	matches;
+	
+};
+
+/**
+ * struct tcf_ematch_ops - ematch module operations
+ * 
+ * @kind: identifier (kind) of this ematch module
+ * @datalen: length of expected configuration data (optional)
+ * @change: called during validation (optional)
+ * @match: called during ematch tree evaluation, must return 1/0
+ * @destroy: called during destroyage (optional)
+ * @dump: called during dumping process (optional)
+ * @owner: owner, must be set to THIS_MODULE
+ * @link: link to previous/next ematch module (internal use)
+ */
+struct tcf_ematch_ops
+{
+	int			kind;
+	int			datalen;
+	int			(*change)(struct tcf_proto *, void *,
+					  int, struct tcf_ematch *);
+	int			(*match)(struct sk_buff *, struct tcf_ematch *,
+					 struct tcf_pkt_info *);
+	void			(*destroy)(struct tcf_proto *,
+					   struct tcf_ematch *);
+	int			(*dump)(struct sk_buff *, struct tcf_ematch *);
+	struct module		*owner;
+	struct list_head	link;
+};
+
+extern int tcf_em_register(struct tcf_ematch_ops *);
+extern int tcf_em_unregister(struct tcf_ematch_ops *);
+extern int tcf_em_tree_validate(struct tcf_proto *, struct rtattr *,
+				struct tcf_ematch_tree *);
+extern void tcf_em_tree_destroy(struct tcf_proto *, struct tcf_ematch_tree *);
+extern int tcf_em_tree_dump(struct sk_buff *, struct tcf_ematch_tree *, int);
+extern int __tcf_em_tree_match(struct sk_buff *, struct tcf_ematch_tree *,
+			       struct tcf_pkt_info *);
+
+/**
+ * tcf_em_tree_change - replace ematch tree of a running classifier
+ *
+ * @tp: classifier kind handle
+ * @dst: destination ematch tree variable
+ * @src: source ematch tree (temporary tree from tcf_em_tree_validate)
+ *
+ * This functions replaces the ematch tree in @dst with the ematch
+ * tree in @src. The classifier in charge of the ematch tree may be
+ * running.
+ */
+static inline void tcf_em_tree_change(struct tcf_proto *tp,
+				      struct tcf_ematch_tree *dst,
+				      struct tcf_ematch_tree *src)
+{
+	tcf_tree_lock(tp);
+	memcpy(dst, src, sizeof(*dst));
+	tcf_tree_unlock(tp);
+}
+
+/**
+ * tcf_em_tree_match - evaulate an ematch tree
+ *
+ * @skb: socket buffer of the packet in question
+ * @tree: ematch tree to be used for evaluation
+ * @info: packet information examined by classifier
+ *
+ * This function matches @skb against the ematch tree in @tree by going
+ * through all ematches respecting their logic relations returning
+ * as soon as the result is obvious.
+ *
+ * Returns 1 if the ematch tree as-one matches, no ematches are configured
+ * or ematch is not enabled in the kernel, otherwise 0 is returned.
+ */
+static inline int tcf_em_tree_match(struct sk_buff *skb,
+				    struct tcf_ematch_tree *tree,
+				    struct tcf_pkt_info *info)
+{
+	if (tree->hdr.nmatches)
+		return __tcf_em_tree_match(skb, tree, info);
+	else
+		return 1;
+}
+
+#else /* CONFIG_NET_EMATCH */
+
+struct tcf_ematch_tree
+{
+};
+
+#define tcf_em_tree_validate(tp, tb, t) ((void)(t), 0)
+#define tcf_em_tree_destroy(tp, t) do { (void)(t); } while(0)
+#define tcf_em_tree_dump(skb, t, tlv) (0)
+#define tcf_em_tree_change(tp, dst, src) do { } while(0)
+#define tcf_em_tree_match(skb, t, info) ((void)(info), 1)
+
+#endif /* CONFIG_NET_EMATCH */
+
+static inline unsigned char * tcf_get_base_ptr(struct sk_buff *skb, int layer)
+{
+	switch (layer) {
+		case TCF_LAYER_LINK:
+			return skb->data;
+		case TCF_LAYER_NETWORK:
+			return skb->nh.raw;
+		case TCF_LAYER_TRANSPORT:
+			return skb->h.raw;
+	}
+
+	return NULL;
+}
+
+static inline int tcf_valid_offset(struct sk_buff *skb, unsigned char *ptr,
+				   int len)
+{
+	return unlikely((ptr + len) < skb->tail && ptr > skb->head);
+}
+
+#ifdef CONFIG_NET_CLS_IND
+static inline int
+tcf_change_indev(struct tcf_proto *tp, char *indev, struct rtattr *indev_tlv)
+{
+	if (rtattr_strlcpy(indev, indev_tlv, IFNAMSIZ) >= IFNAMSIZ)
+		return -EINVAL;
+	return 0;
+}
+
+static inline int
+tcf_match_indev(struct sk_buff *skb, char *indev)
+{
+	if (0 != indev[0]) {
+		if  (NULL == skb->input_dev)
+			return 0;
+		else if (0 != strcmp(indev, skb->input_dev->name))
+			return 0;
+	}
+
+	return 1;
+}
+#endif /* CONFIG_NET_CLS_IND */
+
+#endif
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
new file mode 100644
index 000000000000..87496e3aa330
--- /dev/null
+++ b/include/net/pkt_sched.h
@@ -0,0 +1,249 @@
+#ifndef __NET_PKT_SCHED_H
+#define __NET_PKT_SCHED_H
+
+#include <net/sch_generic.h>
+
+struct qdisc_walker
+{
+	int	stop;
+	int	skip;
+	int	count;
+	int	(*fn)(struct Qdisc *, unsigned long cl, struct qdisc_walker *);
+};
+
+extern rwlock_t qdisc_tree_lock;
+
+#define	QDISC_ALIGN		32
+#define	QDISC_ALIGN_CONST	(QDISC_ALIGN - 1)
+
+static inline void *qdisc_priv(struct Qdisc *q)
+{
+	return (char *)q + ((sizeof(struct Qdisc) + QDISC_ALIGN_CONST)
+			      & ~QDISC_ALIGN_CONST);
+}
+
+/* 
+   Timer resolution MUST BE < 10% of min_schedulable_packet_size/bandwidth
+   
+   Normal IP packet size ~ 512byte, hence:
+
+   0.5Kbyte/1Mbyte/sec = 0.5msec, so that we need 50usec timer for
+   10Mbit ethernet.
+
+   10msec resolution -> <50Kbit/sec.
+   
+   The result: [34]86 is not good choice for QoS router :-(
+
+   The things are not so bad, because we may use artifical
+   clock evaluated by integration of network data flow
+   in the most critical places.
+
+   Note: we do not use fastgettimeofday.
+   The reason is that, when it is not the same thing as
+   gettimeofday, it returns invalid timestamp, which is
+   not updated, when net_bh is active.
+ */
+
+/* General note about internal clock.
+
+   Any clock source returns time intervals, measured in units
+   close to 1usec. With source CONFIG_NET_SCH_CLK_GETTIMEOFDAY it is precisely
+   microseconds, otherwise something close but different chosen to minimize
+   arithmetic cost. Ratio usec/internal untis in form nominator/denominator
+   may be read from /proc/net/psched.
+ */
+
+
+#ifdef CONFIG_NET_SCH_CLK_GETTIMEOFDAY
+
+typedef struct timeval	psched_time_t;
+typedef long		psched_tdiff_t;
+
+#define PSCHED_GET_TIME(stamp) do_gettimeofday(&(stamp))
+#define PSCHED_US2JIFFIE(usecs) (((usecs)+(1000000/HZ-1))/(1000000/HZ))
+#define PSCHED_JIFFIE2US(delay) ((delay)*(1000000/HZ))
+
+#else /* !CONFIG_NET_SCH_CLK_GETTIMEOFDAY */
+
+typedef u64	psched_time_t;
+typedef long	psched_tdiff_t;
+
+#ifdef CONFIG_NET_SCH_CLK_JIFFIES
+
+#if HZ < 96
+#define PSCHED_JSCALE 14
+#elif HZ >= 96 && HZ < 192
+#define PSCHED_JSCALE 13
+#elif HZ >= 192 && HZ < 384
+#define PSCHED_JSCALE 12
+#elif HZ >= 384 && HZ < 768
+#define PSCHED_JSCALE 11
+#elif HZ >= 768
+#define PSCHED_JSCALE 10
+#endif
+
+#define PSCHED_GET_TIME(stamp) ((stamp) = (get_jiffies_64()<<PSCHED_JSCALE))
+#define PSCHED_US2JIFFIE(delay) (((delay)+(1<<PSCHED_JSCALE)-1)>>PSCHED_JSCALE)
+#define PSCHED_JIFFIE2US(delay) ((delay)<<PSCHED_JSCALE)
+
+#endif /* CONFIG_NET_SCH_CLK_JIFFIES */
+#ifdef CONFIG_NET_SCH_CLK_CPU
+#include <asm/timex.h>
+
+extern psched_tdiff_t psched_clock_per_hz;
+extern int psched_clock_scale;
+extern psched_time_t psched_time_base;
+extern cycles_t psched_time_mark;
+
+#define PSCHED_GET_TIME(stamp)						\
+do {									\
+	cycles_t cur = get_cycles();					\
+	if (sizeof(cycles_t) == sizeof(u32)) {				\
+		if (cur <= psched_time_mark)				\
+			psched_time_base += 0x100000000ULL;		\
+		psched_time_mark = cur;					\
+		(stamp) = (psched_time_base + cur)>>psched_clock_scale;	\
+	} else {							\
+		(stamp) = cur>>psched_clock_scale;			\
+	}								\
+} while (0)
+#define PSCHED_US2JIFFIE(delay) (((delay)+psched_clock_per_hz-1)/psched_clock_per_hz)
+#define PSCHED_JIFFIE2US(delay) ((delay)*psched_clock_per_hz)
+
+#endif /* CONFIG_NET_SCH_CLK_CPU */
+
+#endif /* !CONFIG_NET_SCH_CLK_GETTIMEOFDAY */
+
+#ifdef CONFIG_NET_SCH_CLK_GETTIMEOFDAY
+#define PSCHED_TDIFF(tv1, tv2) \
+({ \
+	   int __delta_sec = (tv1).tv_sec - (tv2).tv_sec; \
+	   int __delta = (tv1).tv_usec - (tv2).tv_usec; \
+	   if (__delta_sec) { \
+	           switch (__delta_sec) { \
+		   default: \
+			   __delta = 0; \
+		   case 2: \
+			   __delta += 1000000; \
+		   case 1: \
+			   __delta += 1000000; \
+	           } \
+	   } \
+	   __delta; \
+})
+
+static inline int
+psched_tod_diff(int delta_sec, int bound)
+{
+	int delta;
+
+	if (bound <= 1000000 || delta_sec > (0x7FFFFFFF/1000000)-1)
+		return bound;
+	delta = delta_sec * 1000000;
+	if (delta > bound)
+		delta = bound;
+	return delta;
+}
+
+#define PSCHED_TDIFF_SAFE(tv1, tv2, bound) \
+({ \
+	   int __delta_sec = (tv1).tv_sec - (tv2).tv_sec; \
+	   int __delta = (tv1).tv_usec - (tv2).tv_usec; \
+	   switch (__delta_sec) { \
+	   default: \
+		   __delta = psched_tod_diff(__delta_sec, bound);  break; \
+	   case 2: \
+		   __delta += 1000000; \
+	   case 1: \
+		   __delta += 1000000; \
+	   case 0: ; \
+	   } \
+	   __delta; \
+})
+
+#define PSCHED_TLESS(tv1, tv2) (((tv1).tv_usec < (tv2).tv_usec && \
+				(tv1).tv_sec <= (tv2).tv_sec) || \
+				 (tv1).tv_sec < (tv2).tv_sec)
+
+#define PSCHED_TADD2(tv, delta, tv_res) \
+({ \
+	   int __delta = (tv).tv_usec + (delta); \
+	   (tv_res).tv_sec = (tv).tv_sec; \
+	   if (__delta > 1000000) { (tv_res).tv_sec++; __delta -= 1000000; } \
+	   (tv_res).tv_usec = __delta; \
+})
+
+#define PSCHED_TADD(tv, delta) \
+({ \
+	   (tv).tv_usec += (delta); \
+	   if ((tv).tv_usec > 1000000) { (tv).tv_sec++; \
+		 (tv).tv_usec -= 1000000; } \
+})
+
+/* Set/check that time is in the "past perfect";
+   it depends on concrete representation of system time
+ */
+
+#define PSCHED_SET_PASTPERFECT(t)	((t).tv_sec = 0)
+#define PSCHED_IS_PASTPERFECT(t)	((t).tv_sec == 0)
+
+#define	PSCHED_AUDIT_TDIFF(t) ({ if ((t) > 2000000) (t) = 2000000; })
+
+#else /* !CONFIG_NET_SCH_CLK_GETTIMEOFDAY */
+
+#define PSCHED_TDIFF(tv1, tv2) (long)((tv1) - (tv2))
+#define PSCHED_TDIFF_SAFE(tv1, tv2, bound) \
+	min_t(long long, (tv1) - (tv2), bound)
+
+
+#define PSCHED_TLESS(tv1, tv2) ((tv1) < (tv2))
+#define PSCHED_TADD2(tv, delta, tv_res) ((tv_res) = (tv) + (delta))
+#define PSCHED_TADD(tv, delta) ((tv) += (delta))
+#define PSCHED_SET_PASTPERFECT(t)	((t) = 0)
+#define PSCHED_IS_PASTPERFECT(t)	((t) == 0)
+#define	PSCHED_AUDIT_TDIFF(t)
+
+#endif /* !CONFIG_NET_SCH_CLK_GETTIMEOFDAY */
+
+extern struct Qdisc noop_qdisc;
+extern struct Qdisc_ops noop_qdisc_ops;
+extern struct Qdisc_ops pfifo_qdisc_ops;
+extern struct Qdisc_ops bfifo_qdisc_ops;
+
+extern int register_qdisc(struct Qdisc_ops *qops);
+extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
+extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
+extern void dev_init_scheduler(struct net_device *dev);
+extern void dev_shutdown(struct net_device *dev);
+extern void dev_activate(struct net_device *dev);
+extern void dev_deactivate(struct net_device *dev);
+extern void qdisc_reset(struct Qdisc *qdisc);
+extern void qdisc_destroy(struct Qdisc *qdisc);
+extern struct Qdisc * qdisc_create_dflt(struct net_device *dev,
+	struct Qdisc_ops *ops);
+extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
+		struct rtattr *tab);
+extern void qdisc_put_rtab(struct qdisc_rate_table *tab);
+
+extern int qdisc_restart(struct net_device *dev);
+
+static inline void qdisc_run(struct net_device *dev)
+{
+	while (!netif_queue_stopped(dev) && qdisc_restart(dev) < 0)
+		/* NOTHING */;
+}
+
+extern int tc_classify(struct sk_buff *skb, struct tcf_proto *tp,
+	struct tcf_result *res);
+
+/* Calculate maximal size of packet seen by hard_start_xmit
+   routine of this device.
+ */
+static inline unsigned psched_mtu(struct net_device *dev)
+{
+	unsigned mtu = dev->mtu;
+	return dev->hard_header ? mtu + dev->hard_header_len : mtu;
+}
+
+#endif
diff --git a/include/net/protocol.h b/include/net/protocol.h
new file mode 100644
index 000000000000..357691f6a45f
--- /dev/null
+++ b/include/net/protocol.h
@@ -0,0 +1,99 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the protocol dispatcher.
+ *
+ * Version:	@(#)protocol.h	1.0.2	05/07/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	Changes:
+ *		Alan Cox	:	Added a name field and a frag handler
+ *					field for later.
+ *		Alan Cox	:	Cleaned up, and sorted types.
+ *		Pedro Roque	:	inet6 protocols
+ */
+ 
+#ifndef _PROTOCOL_H
+#define _PROTOCOL_H
+
+#include <linux/config.h>
+#include <linux/in6.h>
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+#include <linux/ipv6.h>
+#endif
+
+#define MAX_INET_PROTOS	256		/* Must be a power of 2		*/
+
+
+/* This is used to register protocols. */
+struct net_protocol {
+	int			(*handler)(struct sk_buff *skb);
+	void			(*err_handler)(struct sk_buff *skb, u32 info);
+	int			no_policy;
+};
+
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+struct inet6_protocol 
+{
+	int	(*handler)(struct sk_buff **skb, unsigned int *nhoffp);
+
+	void	(*err_handler)(struct sk_buff *skb,
+			       struct inet6_skb_parm *opt,
+			       int type, int code, int offset,
+			       __u32 info);
+	unsigned int	flags;	/* INET6_PROTO_xxx */
+};
+
+#define INET6_PROTO_NOPOLICY	0x1
+#define INET6_PROTO_FINAL	0x2
+#endif
+
+/* This is used to register socket interfaces for IP protocols.  */
+struct inet_protosw {
+	struct list_head list;
+
+        /* These two fields form the lookup key.  */
+	unsigned short	 type;	   /* This is the 2nd argument to socket(2). */
+	int		 protocol; /* This is the L4 protocol number.  */
+
+	struct proto	 *prot;
+	struct proto_ops *ops;
+  
+	int              capability; /* Which (if any) capability do
+				      * we need to use this socket
+				      * interface?
+                                      */
+	char             no_check;   /* checksum on rcv/xmit/none? */
+	unsigned char	 flags;      /* See INET_PROTOSW_* below.  */
+};
+#define INET_PROTOSW_REUSE 0x01	     /* Are ports automatically reusable? */
+#define INET_PROTOSW_PERMANENT 0x02  /* Permanent protocols are unremovable. */
+
+extern struct net_protocol *inet_protocol_base;
+extern struct net_protocol *inet_protos[MAX_INET_PROTOS];
+
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+extern struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
+#endif
+
+extern int	inet_add_protocol(struct net_protocol *prot, unsigned char num);
+extern int	inet_del_protocol(struct net_protocol *prot, unsigned char num);
+extern void	inet_register_protosw(struct inet_protosw *p);
+extern void	inet_unregister_protosw(struct inet_protosw *p);
+
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+extern int	inet6_add_protocol(struct inet6_protocol *prot, unsigned char num);
+extern int	inet6_del_protocol(struct inet6_protocol *prot, unsigned char num);
+extern void	inet6_register_protosw(struct inet_protosw *p);
+extern void	inet6_unregister_protosw(struct inet_protosw *p);
+#endif
+
+#endif	/* _PROTOCOL_H */
diff --git a/include/net/psnap.h b/include/net/psnap.h
new file mode 100644
index 000000000000..9c94e8f98b36
--- /dev/null
+++ b/include/net/psnap.h
@@ -0,0 +1,7 @@
+#ifndef _NET_PSNAP_H
+#define _NET_PSNAP_H
+
+extern struct datalink_proto *register_snap_client(unsigned char *desc, int (*rcvfunc)(struct sk_buff *, struct net_device *, struct packet_type *));
+extern void unregister_snap_client(struct datalink_proto *proto);
+
+#endif
diff --git a/include/net/raw.h b/include/net/raw.h
new file mode 100644
index 000000000000..1c411c45587a
--- /dev/null
+++ b/include/net/raw.h
@@ -0,0 +1,42 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the RAW-IP module.
+ *
+ * Version:	@(#)raw.h	1.0.2	05/07/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _RAW_H
+#define _RAW_H
+
+
+extern struct proto raw_prot;
+
+
+extern void 	raw_err(struct sock *, struct sk_buff *, u32 info);
+extern int 	raw_rcv(struct sock *, struct sk_buff *);
+
+/* Note: v4 ICMP wants to get at this stuff, if you change the
+ *       hashing mechanism, make sure you update icmp.c as well.
+ */
+#define RAWV4_HTABLE_SIZE	MAX_INET_PROTOS
+extern struct hlist_head raw_v4_htable[RAWV4_HTABLE_SIZE];
+
+extern rwlock_t raw_v4_lock;
+
+
+extern struct sock *__raw_v4_lookup(struct sock *sk, unsigned short num,
+				    unsigned long raddr, unsigned long laddr,
+				    int dif);
+
+extern void raw_v4_input(struct sk_buff *skb, struct iphdr *iph, int hash);
+
+#endif	/* _RAW_H */
diff --git a/include/net/rawv6.h b/include/net/rawv6.h
new file mode 100644
index 000000000000..23fd9a6a221a
--- /dev/null
+++ b/include/net/rawv6.h
@@ -0,0 +1,27 @@
+#ifndef _NET_RAWV6_H
+#define _NET_RAWV6_H
+
+#ifdef __KERNEL__
+
+#define RAWV6_HTABLE_SIZE	MAX_INET_PROTOS
+extern struct hlist_head raw_v6_htable[RAWV6_HTABLE_SIZE];
+extern rwlock_t raw_v6_lock;
+
+extern void ipv6_raw_deliver(struct sk_buff *skb, int nexthdr);
+
+extern struct sock *__raw_v6_lookup(struct sock *sk, unsigned short num,
+				    struct in6_addr *loc_addr, struct in6_addr *rmt_addr);
+
+extern int			rawv6_rcv(struct sock *sk,
+					  struct sk_buff *skb);
+
+
+extern void			rawv6_err(struct sock *sk,
+					  struct sk_buff *skb,
+					  struct inet6_skb_parm *opt,
+					  int type, int code, 
+					  int offset, u32 info);
+
+#endif
+
+#endif
diff --git a/include/net/rose.h b/include/net/rose.h
new file mode 100644
index 000000000000..3249b979605a
--- /dev/null
+++ b/include/net/rose.h
@@ -0,0 +1,235 @@
+/*
+ *	Declarations of Rose type objects.
+ *
+ *	Jonathan Naylor G4KLX	25/8/96
+ */
+
+#ifndef _ROSE_H
+#define _ROSE_H 
+
+#include <linux/rose.h>
+#include <net/sock.h>
+
+#define	ROSE_ADDR_LEN			5
+
+#define	ROSE_MIN_LEN			3
+
+#define	ROSE_GFI			0x10
+#define	ROSE_Q_BIT			0x80
+#define	ROSE_D_BIT			0x40
+#define	ROSE_M_BIT			0x10
+
+#define	ROSE_CALL_REQUEST		0x0B
+#define	ROSE_CALL_ACCEPTED		0x0F
+#define	ROSE_CLEAR_REQUEST		0x13
+#define	ROSE_CLEAR_CONFIRMATION		0x17
+#define	ROSE_DATA			0x00
+#define	ROSE_INTERRUPT			0x23
+#define	ROSE_INTERRUPT_CONFIRMATION	0x27
+#define	ROSE_RR				0x01
+#define	ROSE_RNR			0x05
+#define	ROSE_REJ			0x09
+#define	ROSE_RESET_REQUEST		0x1B
+#define	ROSE_RESET_CONFIRMATION		0x1F
+#define	ROSE_REGISTRATION_REQUEST	0xF3
+#define	ROSE_REGISTRATION_CONFIRMATION	0xF7
+#define	ROSE_RESTART_REQUEST		0xFB
+#define	ROSE_RESTART_CONFIRMATION	0xFF
+#define	ROSE_DIAGNOSTIC			0xF1
+#define	ROSE_ILLEGAL			0xFD
+
+/* Define Link State constants. */
+
+enum {
+	ROSE_STATE_0,			/* Ready */
+	ROSE_STATE_1,			/* Awaiting Call Accepted */
+	ROSE_STATE_2,			/* Awaiting Clear Confirmation */
+	ROSE_STATE_3,			/* Data Transfer */
+	ROSE_STATE_4,			/* Awaiting Reset Confirmation */
+	ROSE_STATE_5			/* Deferred Call Acceptance */
+};
+
+#define ROSE_DEFAULT_T0			(180 * HZ)	/* Default T10 T20 value */
+#define ROSE_DEFAULT_T1			(200 * HZ)	/* Default T11 T21 value */
+#define ROSE_DEFAULT_T2			(180 * HZ)	/* Default T12 T22 value */
+#define	ROSE_DEFAULT_T3			(180 * HZ)	/* Default T13 T23 value */
+#define	ROSE_DEFAULT_HB			(5 * HZ)	/* Default Holdback value */
+#define	ROSE_DEFAULT_IDLE		(0 * 60 * HZ)	/* No Activity Timeout - none */
+#define	ROSE_DEFAULT_ROUTING		1		/* Default routing flag */
+#define	ROSE_DEFAULT_FAIL_TIMEOUT	(120 * HZ)	/* Time until link considered usable */
+#define	ROSE_DEFAULT_MAXVC		50		/* Maximum number of VCs per neighbour */
+#define	ROSE_DEFAULT_WINDOW_SIZE	7		/* Default window size */
+
+#define ROSE_MODULUS 			8
+#define	ROSE_MAX_PACKET_SIZE		251		/* Maximum packet size */
+
+#define	ROSE_COND_ACK_PENDING		0x01
+#define	ROSE_COND_PEER_RX_BUSY		0x02
+#define	ROSE_COND_OWN_RX_BUSY		0x04
+
+#define	FAC_NATIONAL			0x00
+#define	FAC_CCITT			0x0F
+
+#define	FAC_NATIONAL_RAND		0x7F
+#define	FAC_NATIONAL_FLAGS		0x3F
+#define	FAC_NATIONAL_DEST_DIGI		0xE9
+#define	FAC_NATIONAL_SRC_DIGI		0xEB
+#define	FAC_NATIONAL_FAIL_CALL		0xED
+#define	FAC_NATIONAL_FAIL_ADD		0xEE
+#define	FAC_NATIONAL_DIGIS			0xEF
+
+#define	FAC_CCITT_DEST_NSAP		0xC9
+#define	FAC_CCITT_SRC_NSAP		0xCB
+
+struct rose_neigh {
+	struct rose_neigh	*next;
+	ax25_address		callsign;
+	ax25_digi		*digipeat;
+	ax25_cb			*ax25;
+	struct net_device		*dev;
+	unsigned short		count;
+	unsigned short		use;
+	unsigned int		number;
+	char			restarted;
+	char			dce_mode;
+	char			loopback;
+	struct sk_buff_head	queue;
+	struct timer_list	t0timer;
+	struct timer_list	ftimer;
+};
+
+struct rose_node {
+	struct rose_node	*next;
+	rose_address		address;
+	unsigned short		mask;
+	unsigned char		count;
+	char			loopback;
+	struct rose_neigh	*neighbour[3];
+};
+
+struct rose_route {
+	struct rose_route	*next;
+	unsigned int		lci1, lci2;
+	rose_address		src_addr, dest_addr;
+	ax25_address		src_call, dest_call;
+	struct rose_neigh 	*neigh1, *neigh2;
+	unsigned int		rand;
+};
+
+struct rose_sock {
+	struct sock		sock;
+	rose_address		source_addr,   dest_addr;
+	ax25_address		source_call,   dest_call;
+	unsigned char		source_ndigis, dest_ndigis;
+	ax25_address		source_digis[ROSE_MAX_DIGIS];
+	ax25_address		dest_digis[ROSE_MAX_DIGIS];
+	struct rose_neigh	*neighbour;
+	struct net_device		*device;
+	unsigned int		lci, rand;
+	unsigned char		state, condition, qbitincl, defer;
+	unsigned char		cause, diagnostic;
+	unsigned short		vs, vr, va, vl;
+	unsigned long		t1, t2, t3, hb, idle;
+#ifdef M_BIT
+	unsigned short		fraglen;
+	struct sk_buff_head	frag_queue;
+#endif
+	struct sk_buff_head	ack_queue;
+	struct rose_facilities_struct facilities;
+	struct timer_list	timer;
+	struct timer_list	idletimer;
+};
+
+#define rose_sk(sk) ((struct rose_sock *)(sk))
+
+/* af_rose.c */
+extern ax25_address rose_callsign;
+extern int  sysctl_rose_restart_request_timeout;
+extern int  sysctl_rose_call_request_timeout;
+extern int  sysctl_rose_reset_request_timeout;
+extern int  sysctl_rose_clear_request_timeout;
+extern int  sysctl_rose_no_activity_timeout;
+extern int  sysctl_rose_ack_hold_back_timeout;
+extern int  sysctl_rose_routing_control;
+extern int  sysctl_rose_link_fail_timeout;
+extern int  sysctl_rose_maximum_vcs;
+extern int  sysctl_rose_window_size;
+extern int  rosecmp(rose_address *, rose_address *);
+extern int  rosecmpm(rose_address *, rose_address *, unsigned short);
+extern const char *rose2asc(const rose_address *);
+extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
+extern void rose_kill_by_neigh(struct rose_neigh *);
+extern unsigned int rose_new_lci(struct rose_neigh *);
+extern int  rose_rx_call_request(struct sk_buff *, struct net_device *, struct rose_neigh *, unsigned int);
+extern void rose_destroy_socket(struct sock *);
+
+/* rose_dev.c */
+extern void  rose_setup(struct net_device *);
+
+/* rose_in.c */
+extern int  rose_process_rx_frame(struct sock *, struct sk_buff *);
+
+/* rose_link.c */
+extern void rose_start_ftimer(struct rose_neigh *);
+extern void rose_stop_ftimer(struct rose_neigh *);
+extern void rose_stop_t0timer(struct rose_neigh *);
+extern int  rose_ftimer_running(struct rose_neigh *);
+extern void rose_link_rx_restart(struct sk_buff *, struct rose_neigh *, unsigned short);
+extern void rose_transmit_clear_request(struct rose_neigh *, unsigned int, unsigned char, unsigned char);
+extern void rose_transmit_link(struct sk_buff *, struct rose_neigh *);
+
+/* rose_loopback.c */
+extern void rose_loopback_init(void);
+extern void rose_loopback_clear(void);
+extern int  rose_loopback_queue(struct sk_buff *, struct rose_neigh *);
+
+/* rose_out.c */
+extern void rose_kick(struct sock *);
+extern void rose_enquiry_response(struct sock *);
+
+/* rose_route.c */
+extern struct rose_neigh *rose_loopback_neigh;
+extern struct file_operations rose_neigh_fops;
+extern struct file_operations rose_nodes_fops;
+extern struct file_operations rose_routes_fops;
+
+extern int  rose_add_loopback_neigh(void);
+extern int  rose_add_loopback_node(rose_address *);
+extern void rose_del_loopback_node(rose_address *);
+extern void rose_rt_device_down(struct net_device *);
+extern void rose_link_device_down(struct net_device *);
+extern struct net_device *rose_dev_first(void);
+extern struct net_device *rose_dev_get(rose_address *);
+extern struct rose_route *rose_route_free_lci(unsigned int, struct rose_neigh *);
+extern struct rose_neigh *rose_get_neigh(rose_address *, unsigned char *, unsigned char *);
+extern int  rose_rt_ioctl(unsigned int, void __user *);
+extern void rose_link_failed(ax25_cb *, int);
+extern int  rose_route_frame(struct sk_buff *, ax25_cb *);
+extern void rose_rt_free(void);
+
+/* rose_subr.c */
+extern void rose_clear_queues(struct sock *);
+extern void rose_frames_acked(struct sock *, unsigned short);
+extern void rose_requeue_frames(struct sock *);
+extern int  rose_validate_nr(struct sock *, unsigned short);
+extern void rose_write_internal(struct sock *, int);
+extern int  rose_decode(struct sk_buff *, int *, int *, int *, int *, int *);
+extern int  rose_parse_facilities(unsigned char *, struct rose_facilities_struct *);
+extern void rose_disconnect(struct sock *, int, int, int);
+
+/* rose_timer.c */
+extern void rose_start_heartbeat(struct sock *);
+extern void rose_start_t1timer(struct sock *);
+extern void rose_start_t2timer(struct sock *);
+extern void rose_start_t3timer(struct sock *);
+extern void rose_start_hbtimer(struct sock *);
+extern void rose_start_idletimer(struct sock *);
+extern void rose_stop_heartbeat(struct sock *);
+extern void rose_stop_timer(struct sock *);
+extern void rose_stop_idletimer(struct sock *);
+
+/* sysctl_net_rose.c */
+extern void rose_register_sysctl(void);
+extern void rose_unregister_sysctl(void);
+
+#endif
diff --git a/include/net/route.h b/include/net/route.h
new file mode 100644
index 000000000000..22da7579d5de
--- /dev/null
+++ b/include/net/route.h
@@ -0,0 +1,205 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP router.
+ *
+ * Version:	@(#)route.h	1.0.4	05/27/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Fixes:
+ *		Alan Cox	:	Reformatted. Added ip_rt_local()
+ *		Alan Cox	:	Support for TCP parameters.
+ *		Alexey Kuznetsov:	Major changes for new routing code.
+ *		Mike McLagan    :	Routing by source
+ *		Robert Olsson   :	Added rt_cache statistics
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _ROUTE_H
+#define _ROUTE_H
+
+#include <linux/config.h>
+#include <net/dst.h>
+#include <net/inetpeer.h>
+#include <net/flow.h>
+#include <linux/in_route.h>
+#include <linux/rtnetlink.h>
+#include <linux/route.h>
+#include <linux/ip.h>
+#include <linux/cache.h>
+
+#ifndef __KERNEL__
+#warning This file is not supposed to be used outside of kernel.
+#endif
+
+#define RTO_ONLINK	0x01
+
+#define RTO_CONN	0
+/* RTO_CONN is not used (being alias for 0), but preserved not to break
+ * some modules referring to it. */
+
+#define RT_CONN_FLAGS(sk)   (RT_TOS(inet_sk(sk)->tos) | sock_flag(sk, SOCK_LOCALROUTE))
+
+struct fib_nh;
+struct inet_peer;
+struct rtable
+{
+	union
+	{
+		struct dst_entry	dst;
+		struct rtable		*rt_next;
+	} u;
+
+	struct in_device	*idev;
+	
+	unsigned		rt_flags;
+	__u16			rt_type;
+	__u16			rt_multipath_alg;
+
+	__u32			rt_dst;	/* Path destination	*/
+	__u32			rt_src;	/* Path source		*/
+	int			rt_iif;
+
+	/* Info on neighbour */
+	__u32			rt_gateway;
+
+	/* Cache lookup keys */
+	struct flowi		fl;
+
+	/* Miscellaneous cached information */
+	__u32			rt_spec_dst; /* RFC1122 specific destination */
+	struct inet_peer	*peer; /* long-living peer info */
+};
+
+struct ip_rt_acct
+{
+	__u32 	o_bytes;
+	__u32 	o_packets;
+	__u32 	i_bytes;
+	__u32 	i_packets;
+};
+
+struct rt_cache_stat 
+{
+        unsigned int in_hit;
+        unsigned int in_slow_tot;
+        unsigned int in_slow_mc;
+        unsigned int in_no_route;
+        unsigned int in_brd;
+        unsigned int in_martian_dst;
+        unsigned int in_martian_src;
+        unsigned int out_hit;
+        unsigned int out_slow_tot;
+        unsigned int out_slow_mc;
+        unsigned int gc_total;
+        unsigned int gc_ignored;
+        unsigned int gc_goal_miss;
+        unsigned int gc_dst_overflow;
+        unsigned int in_hlist_search;
+        unsigned int out_hlist_search;
+};
+
+extern struct rt_cache_stat *rt_cache_stat;
+#define RT_CACHE_STAT_INC(field)					  \
+		(per_cpu_ptr(rt_cache_stat, _smp_processor_id())->field++)
+
+extern struct ip_rt_acct *ip_rt_acct;
+
+struct in_device;
+extern int		ip_rt_init(void);
+extern void		ip_rt_redirect(u32 old_gw, u32 dst, u32 new_gw,
+				       u32 src, u8 tos, struct net_device *dev);
+extern void		ip_rt_advice(struct rtable **rp, int advice);
+extern void		rt_cache_flush(int how);
+extern int		__ip_route_output_key(struct rtable **, const struct flowi *flp);
+extern int		ip_route_output_key(struct rtable **, struct flowi *flp);
+extern int		ip_route_output_flow(struct rtable **rp, struct flowi *flp, struct sock *sk, int flags);
+extern int		ip_route_input(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin);
+extern unsigned short	ip_rt_frag_needed(struct iphdr *iph, unsigned short new_mtu);
+extern void		ip_rt_send_redirect(struct sk_buff *skb);
+
+extern unsigned		inet_addr_type(u32 addr);
+extern void		ip_rt_multicast_event(struct in_device *);
+extern int		ip_rt_ioctl(unsigned int cmd, void __user *arg);
+extern void		ip_rt_get_source(u8 *src, struct rtable *rt);
+extern int		ip_rt_dump(struct sk_buff *skb,  struct netlink_callback *cb);
+
+static inline void ip_rt_put(struct rtable * rt)
+{
+	if (rt)
+		dst_release(&rt->u.dst);
+}
+
+#define IPTOS_RT_MASK	(IPTOS_TOS_MASK & ~3)
+
+extern __u8 ip_tos2prio[16];
+
+static inline char rt_tos2priority(u8 tos)
+{
+	return ip_tos2prio[IPTOS_TOS(tos)>>1];
+}
+
+static inline int ip_route_connect(struct rtable **rp, u32 dst,
+				   u32 src, u32 tos, int oif, u8 protocol,
+				   u16 sport, u16 dport, struct sock *sk)
+{
+	struct flowi fl = { .oif = oif,
+			    .nl_u = { .ip4_u = { .daddr = dst,
+						 .saddr = src,
+						 .tos   = tos } },
+			    .proto = protocol,
+			    .uli_u = { .ports =
+				       { .sport = sport,
+					 .dport = dport } } };
+
+	int err;
+	if (!dst || !src) {
+		err = __ip_route_output_key(rp, &fl);
+		if (err)
+			return err;
+		fl.fl4_dst = (*rp)->rt_dst;
+		fl.fl4_src = (*rp)->rt_src;
+		ip_rt_put(*rp);
+		*rp = NULL;
+	}
+	return ip_route_output_flow(rp, &fl, sk, 0);
+}
+
+static inline int ip_route_newports(struct rtable **rp, u16 sport, u16 dport,
+				    struct sock *sk)
+{
+	if (sport != (*rp)->fl.fl_ip_sport ||
+	    dport != (*rp)->fl.fl_ip_dport) {
+		struct flowi fl;
+
+		memcpy(&fl, &(*rp)->fl, sizeof(fl));
+		fl.fl_ip_sport = sport;
+		fl.fl_ip_dport = dport;
+#if defined(CONFIG_IP_ROUTE_MULTIPATH_CACHED)
+		fl.flags |= FLOWI_FLAG_MULTIPATHOLDROUTE;
+#endif
+		ip_rt_put(*rp);
+		*rp = NULL;
+		return ip_route_output_flow(rp, &fl, sk, 0);
+	}
+	return 0;
+}
+
+extern void rt_bind_peer(struct rtable *rt, int create);
+
+static inline struct inet_peer *rt_get_peer(struct rtable *rt)
+{
+	if (rt->peer)
+		return rt->peer;
+
+	rt_bind_peer(rt, 0);
+	return rt->peer;
+}
+
+#endif	/* _ROUTE_H */
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
new file mode 100644
index 000000000000..c57504b3b518
--- /dev/null
+++ b/include/net/sch_generic.h
@@ -0,0 +1,175 @@
+#ifndef __NET_SCHED_GENERIC_H
+#define __NET_SCHED_GENERIC_H
+
+#include <linux/config.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/rcupdate.h>
+#include <linux/module.h>
+#include <linux/rtnetlink.h>
+#include <linux/pkt_sched.h>
+#include <linux/pkt_cls.h>
+#include <net/gen_stats.h>
+
+struct Qdisc_ops;
+struct qdisc_walker;
+struct tcf_walker;
+struct module;
+
+struct qdisc_rate_table
+{
+	struct tc_ratespec rate;
+	u32		data[256];
+	struct qdisc_rate_table *next;
+	int		refcnt;
+};
+
+struct Qdisc
+{
+	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
+	struct sk_buff *	(*dequeue)(struct Qdisc *dev);
+	unsigned		flags;
+#define TCQ_F_BUILTIN	1
+#define TCQ_F_THROTTLED	2
+#define TCQ_F_INGRESS	4
+	int			padded;
+	struct Qdisc_ops	*ops;
+	u32			handle;
+	u32			parent;
+	atomic_t		refcnt;
+	struct sk_buff_head	q;
+	struct net_device	*dev;
+	struct list_head	list;
+
+	struct gnet_stats_basic	bstats;
+	struct gnet_stats_queue	qstats;
+	struct gnet_stats_rate_est	rate_est;
+	spinlock_t		*stats_lock;
+	struct rcu_head 	q_rcu;
+	int			(*reshape_fail)(struct sk_buff *skb,
+					struct Qdisc *q);
+
+	/* This field is deprecated, but it is still used by CBQ
+	 * and it will live until better solution will be invented.
+	 */
+	struct Qdisc		*__parent;
+};
+
+struct Qdisc_class_ops
+{
+	/* Child qdisc manipulation */
+	int			(*graft)(struct Qdisc *, unsigned long cl,
+					struct Qdisc *, struct Qdisc **);
+	struct Qdisc *		(*leaf)(struct Qdisc *, unsigned long cl);
+
+	/* Class manipulation routines */
+	unsigned long		(*get)(struct Qdisc *, u32 classid);
+	void			(*put)(struct Qdisc *, unsigned long);
+	int			(*change)(struct Qdisc *, u32, u32,
+					struct rtattr **, unsigned long *);
+	int			(*delete)(struct Qdisc *, unsigned long);
+	void			(*walk)(struct Qdisc *, struct qdisc_walker * arg);
+
+	/* Filter manipulation */
+	struct tcf_proto **	(*tcf_chain)(struct Qdisc *, unsigned long);
+	unsigned long		(*bind_tcf)(struct Qdisc *, unsigned long,
+					u32 classid);
+	void			(*unbind_tcf)(struct Qdisc *, unsigned long);
+
+	/* rtnetlink specific */
+	int			(*dump)(struct Qdisc *, unsigned long,
+					struct sk_buff *skb, struct tcmsg*);
+	int			(*dump_stats)(struct Qdisc *, unsigned long,
+					struct gnet_dump *);
+};
+
+struct Qdisc_ops
+{
+	struct Qdisc_ops	*next;
+	struct Qdisc_class_ops	*cl_ops;
+	char			id[IFNAMSIZ];
+	int			priv_size;
+
+	int 			(*enqueue)(struct sk_buff *, struct Qdisc *);
+	struct sk_buff *	(*dequeue)(struct Qdisc *);
+	int 			(*requeue)(struct sk_buff *, struct Qdisc *);
+	unsigned int		(*drop)(struct Qdisc *);
+
+	int			(*init)(struct Qdisc *, struct rtattr *arg);
+	void			(*reset)(struct Qdisc *);
+	void			(*destroy)(struct Qdisc *);
+	int			(*change)(struct Qdisc *, struct rtattr *arg);
+
+	int			(*dump)(struct Qdisc *, struct sk_buff *);
+	int			(*dump_stats)(struct Qdisc *, struct gnet_dump *);
+
+	struct module		*owner;
+};
+
+
+struct tcf_result
+{
+	unsigned long	class;
+	u32		classid;
+};
+
+struct tcf_proto_ops
+{
+	struct tcf_proto_ops	*next;
+	char			kind[IFNAMSIZ];
+
+	int			(*classify)(struct sk_buff*, struct tcf_proto*,
+					struct tcf_result *);
+	int			(*init)(struct tcf_proto*);
+	void			(*destroy)(struct tcf_proto*);
+
+	unsigned long		(*get)(struct tcf_proto*, u32 handle);
+	void			(*put)(struct tcf_proto*, unsigned long);
+	int			(*change)(struct tcf_proto*, unsigned long,
+					u32 handle, struct rtattr **,
+					unsigned long *);
+	int			(*delete)(struct tcf_proto*, unsigned long);
+	void			(*walk)(struct tcf_proto*, struct tcf_walker *arg);
+
+	/* rtnetlink specific */
+	int			(*dump)(struct tcf_proto*, unsigned long,
+					struct sk_buff *skb, struct tcmsg*);
+
+	struct module		*owner;
+};
+
+struct tcf_proto
+{
+	/* Fast access part */
+	struct tcf_proto	*next;
+	void			*root;
+	int			(*classify)(struct sk_buff*, struct tcf_proto*,
+					struct tcf_result *);
+	u32			protocol;
+
+	/* All the rest */
+	u32			prio;
+	u32			classid;
+	struct Qdisc		*q;
+	void			*data;
+	struct tcf_proto_ops	*ops;
+};
+
+
+extern void qdisc_lock_tree(struct net_device *dev);
+extern void qdisc_unlock_tree(struct net_device *dev);
+
+#define sch_tree_lock(q)	qdisc_lock_tree((q)->dev)
+#define sch_tree_unlock(q)	qdisc_unlock_tree((q)->dev)
+#define tcf_tree_lock(tp)	qdisc_lock_tree((tp)->q->dev)
+#define tcf_tree_unlock(tp)	qdisc_unlock_tree((tp)->q->dev)
+
+static inline void
+tcf_destroy(struct tcf_proto *tp)
+{
+	tp->ops->destroy(tp);
+	module_put(tp->ops->owner);
+	kfree(tp);
+}
+
+#endif
diff --git a/include/net/scm.h b/include/net/scm.h
new file mode 100644
index 000000000000..c3fa3d5ab606
--- /dev/null
+++ b/include/net/scm.h
@@ -0,0 +1,71 @@
+#ifndef __LINUX_NET_SCM_H
+#define __LINUX_NET_SCM_H
+
+#include <linux/limits.h>
+#include <linux/net.h>
+
+/* Well, we should have at least one descriptor open
+ * to accept passed FDs 8)
+ */
+#define SCM_MAX_FD	(OPEN_MAX-1)
+
+struct scm_fp_list
+{
+	int		count;
+	struct file	*fp[SCM_MAX_FD];
+};
+
+struct scm_cookie
+{
+	struct ucred		creds;		/* Skb credentials	*/
+	struct scm_fp_list	*fp;		/* Passed files		*/
+	unsigned long		seq;		/* Connection seqno	*/
+};
+
+extern void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm);
+extern void scm_detach_fds_compat(struct msghdr *msg, struct scm_cookie *scm);
+extern int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm);
+extern void __scm_destroy(struct scm_cookie *scm);
+extern struct scm_fp_list * scm_fp_dup(struct scm_fp_list *fpl);
+
+static __inline__ void scm_destroy(struct scm_cookie *scm)
+{
+	if (scm && scm->fp)
+		__scm_destroy(scm);
+}
+
+static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
+			       struct scm_cookie *scm)
+{
+	memset(scm, 0, sizeof(*scm));
+	scm->creds.uid = current->uid;
+	scm->creds.gid = current->gid;
+	scm->creds.pid = current->tgid;
+	if (msg->msg_controllen <= 0)
+		return 0;
+	return __scm_send(sock, msg, scm);
+}
+
+static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
+				struct scm_cookie *scm, int flags)
+{
+	if (!msg->msg_control)
+	{
+		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp)
+			msg->msg_flags |= MSG_CTRUNC;
+		scm_destroy(scm);
+		return;
+	}
+
+	if (test_bit(SOCK_PASSCRED, &sock->flags))
+		put_cmsg(msg, SOL_SOCKET, SCM_CREDENTIALS, sizeof(scm->creds), &scm->creds);
+
+	if (!scm->fp)
+		return;
+	
+	scm_detach_fds(msg, scm);
+}
+
+
+#endif /* __LINUX_NET_SCM_H */
+
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
new file mode 100644
index 000000000000..ebc5282e6d58
--- /dev/null
+++ b/include/net/sctp/command.h
@@ -0,0 +1,211 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (C) 1999-2001 Cisco, Motorola
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * These are the definitions needed for the command object.
+ *
+ * The SCTP reference implementation  is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * the SCTP reference implementation  is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to one of the
+ * following email addresses:
+ *
+ * La Monte H.P. Yarroll <piggy@acm.org>
+ * Karl Knutson <karl@athena.chicago.il.us>
+ * Ardelle Fan <ardelle.fan@intel.com>
+ * Sridhar Samudrala <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+
+#ifndef __net_sctp_command_h__
+#define __net_sctp_command_h__
+
+#include <net/sctp/constants.h>
+#include <net/sctp/structs.h>
+
+
+typedef enum {
+	SCTP_CMD_NOP = 0,	/* Do nothing. */
+	SCTP_CMD_NEW_ASOC,	/* Register a new association.  */
+	SCTP_CMD_DELETE_TCB,	/* Delete the current association. */
+	SCTP_CMD_NEW_STATE,	/* Enter a new state.  */
+	SCTP_CMD_REPORT_TSN,	/* Record the arrival of a TSN.  */
+	SCTP_CMD_GEN_SACK,	/* Send a Selective ACK (maybe).  */
+	SCTP_CMD_PROCESS_SACK,	/* Process an inbound SACK.  */
+	SCTP_CMD_GEN_INIT_ACK,	/* Generate an INIT ACK chunk.  */
+	SCTP_CMD_PEER_INIT,	/* Process a INIT from the peer.  */
+	SCTP_CMD_GEN_COOKIE_ECHO, /* Generate a COOKIE ECHO chunk. */
+	SCTP_CMD_CHUNK_ULP,	/* Send a chunk to the sockets layer.  */
+	SCTP_CMD_EVENT_ULP,	/* Send a notification to the sockets layer. */
+	SCTP_CMD_REPLY,		/* Send a chunk to our peer.  */
+	SCTP_CMD_SEND_PKT,	/* Send a full packet to our peer.  */
+	SCTP_CMD_RETRAN,	/* Mark a transport for retransmission.  */
+	SCTP_CMD_ECN_CE,        /* Do delayed CE processing.   */
+	SCTP_CMD_ECN_ECNE,	/* Do delayed ECNE processing. */
+	SCTP_CMD_ECN_CWR,	/* Do delayed CWR processing.  */
+	SCTP_CMD_TIMER_START,	/* Start a timer.  */
+	SCTP_CMD_TIMER_RESTART,	/* Restart a timer. */
+	SCTP_CMD_TIMER_STOP,	/* Stop a timer. */
+	SCTP_CMD_COUNTER_RESET, /* Reset a counter. */
+	SCTP_CMD_COUNTER_INC,   /* Increment a counter. */
+	SCTP_CMD_INIT_RESTART,  /* High level, do init timer work. */
+	SCTP_CMD_INIT_FAILED,   /* High level, do init failure work. */
+	SCTP_CMD_REPORT_DUP,	/* Report a duplicate TSN.  */
+	SCTP_CMD_STRIKE,	/* Mark a strike against a transport.  */
+	SCTP_CMD_TRANSMIT,      /* Transmit the outqueue. */
+	SCTP_CMD_HB_TIMERS_START,    /* Start the heartbeat timers. */
+	SCTP_CMD_HB_TIMER_UPDATE,    /* Update a heartbeat timers.  */
+	SCTP_CMD_HB_TIMERS_STOP,     /* Stop the heartbeat timers.  */
+	SCTP_CMD_TRANSPORT_RESET,    /* Reset the status of a transport. */
+	SCTP_CMD_TRANSPORT_ON,       /* Mark the transport as active. */
+	SCTP_CMD_REPORT_ERROR,   /* Pass this error back out of the sm. */
+	SCTP_CMD_REPORT_BAD_TAG, /* Verification tags didn't match. */
+	SCTP_CMD_PROCESS_CTSN,   /* Sideeffect from shutdown. */
+	SCTP_CMD_ASSOC_FAILED,	 /* Handle association failure. */
+	SCTP_CMD_DISCARD_PACKET, /* Discard the whole packet. */
+	SCTP_CMD_GEN_SHUTDOWN,   /* Generate a SHUTDOWN chunk. */
+	SCTP_CMD_UPDATE_ASSOC,   /* Update association information. */
+	SCTP_CMD_PURGE_OUTQUEUE, /* Purge all data waiting to be sent. */
+	SCTP_CMD_SETUP_T2,       /* Hi-level, setup T2-shutdown parms.  */
+	SCTP_CMD_RTO_PENDING,	 /* Set transport's rto_pending. */
+	SCTP_CMD_PART_DELIVER,	 /* Partial data delivery considerations. */
+	SCTP_CMD_RENEGE,         /* Renege data on an association. */
+	SCTP_CMD_SETUP_T4,	 /* ADDIP, setup T4 RTO timer parms. */
+	SCTP_CMD_PROCESS_OPERR,  /* Process an ERROR chunk. */
+	SCTP_CMD_REPORT_FWDTSN,	 /* Report new cumulative TSN Ack. */
+	SCTP_CMD_PROCESS_FWDTSN, /* Skips were reported, so process further. */
+	SCTP_CMD_CLEAR_INIT_TAG, /* Clears association peer's inittag. */
+	SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */
+	SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */
+	SCTP_CMD_FORCE_PRIM_RETRAN,  /* Forces retrans. over primary path. */
+	SCTP_CMD_LAST
+} sctp_verb_t;
+
+#define SCTP_CMD_MAX		(SCTP_CMD_LAST - 1)
+#define SCTP_CMD_NUM_VERBS	(SCTP_CMD_MAX + 1)
+
+/* How many commands can you put in an sctp_cmd_seq_t?
+ * This is a rather arbitrary number, ideally derived from a careful
+ * analysis of the state functions, but in reality just taken from
+ * thin air in the hopes othat we don't trigger a kernel panic.
+ */
+#define SCTP_MAX_NUM_COMMANDS 14
+
+typedef union {
+	__s32 i32;
+	__u32 u32;
+	__u16 u16;
+	__u8 u8;
+	int error;
+	sctp_state_t state;
+	sctp_event_timeout_t to;
+	sctp_counter_t counter;
+	void *ptr;
+	struct sctp_chunk *chunk;
+	struct sctp_association *asoc;
+	struct sctp_transport *transport;
+	struct sctp_bind_addr *bp;
+	sctp_init_chunk_t *init;
+	struct sctp_ulpevent *ulpevent;
+	struct sctp_packet *packet;
+	sctp_sackhdr_t *sackh;
+} sctp_arg_t;
+
+/* We are simulating ML type constructors here.
+ *
+ * SCTP_ARG_CONSTRUCTOR(NAME, TYPE, ELT) builds a function called
+ * SCTP_NAME() which takes an argument of type TYPE and returns an
+ * sctp_arg_t.  It does this by inserting the sole argument into the
+ * ELT union element of a local sctp_arg_t.
+ *
+ * E.g., SCTP_ARG_CONSTRUCTOR(I32, __s32, i32) builds SCTP_I32(arg),
+ * which takes an __s32 and returns a sctp_arg_t containing the
+ * __s32.  So, after foo = SCTP_I32(arg), foo.i32 == arg.
+ */
+static inline sctp_arg_t SCTP_NULL(void)
+{
+	sctp_arg_t retval; retval.ptr = NULL; return retval;
+}
+static inline sctp_arg_t SCTP_NOFORCE(void)
+{
+	sctp_arg_t retval; retval.i32 = 0; return retval;
+}
+static inline sctp_arg_t SCTP_FORCE(void)
+{
+	sctp_arg_t retval; retval.i32 = 1; return retval;
+}
+
+#define SCTP_ARG_CONSTRUCTOR(name, type, elt) \
+static inline sctp_arg_t	\
+SCTP_## name (type arg)		\
+{ sctp_arg_t retval; retval.elt = arg; return retval; }
+
+SCTP_ARG_CONSTRUCTOR(I32,	__s32, i32)
+SCTP_ARG_CONSTRUCTOR(U32,	__u32, u32)
+SCTP_ARG_CONSTRUCTOR(U16,	__u16, u16)
+SCTP_ARG_CONSTRUCTOR(U8,	__u8, u8)
+SCTP_ARG_CONSTRUCTOR(ERROR,     int, error)
+SCTP_ARG_CONSTRUCTOR(STATE,	sctp_state_t, state)
+SCTP_ARG_CONSTRUCTOR(COUNTER,	sctp_counter_t, counter)
+SCTP_ARG_CONSTRUCTOR(TO,	sctp_event_timeout_t, to)
+SCTP_ARG_CONSTRUCTOR(PTR,	void *, ptr)
+SCTP_ARG_CONSTRUCTOR(CHUNK,	struct sctp_chunk *, chunk)
+SCTP_ARG_CONSTRUCTOR(ASOC,	struct sctp_association *, asoc)
+SCTP_ARG_CONSTRUCTOR(TRANSPORT,	struct sctp_transport *, transport)
+SCTP_ARG_CONSTRUCTOR(BA,	struct sctp_bind_addr *, bp)
+SCTP_ARG_CONSTRUCTOR(PEER_INIT,	sctp_init_chunk_t *, init)
+SCTP_ARG_CONSTRUCTOR(ULPEVENT,  struct sctp_ulpevent *, ulpevent)
+SCTP_ARG_CONSTRUCTOR(PACKET,	struct sctp_packet *, packet)
+SCTP_ARG_CONSTRUCTOR(SACKH,	sctp_sackhdr_t *, sackh)
+
+typedef struct {
+	sctp_arg_t obj;
+	sctp_verb_t verb;
+} sctp_cmd_t;
+
+typedef struct {
+	sctp_cmd_t cmds[SCTP_MAX_NUM_COMMANDS];
+	__u8 next_free_slot;
+	__u8 next_cmd;
+} sctp_cmd_seq_t;
+
+
+/* Initialize a block of memory as a command sequence.
+ * Return 0 if the initialization fails.
+ */
+int sctp_init_cmd_seq(sctp_cmd_seq_t *seq);
+
+/* Add a command to an sctp_cmd_seq_t.
+ * Return 0 if the command sequence is full.
+ *
+ * Use the SCTP_* constructors defined by SCTP_ARG_CONSTRUCTOR() above
+ * to wrap data which goes in the obj argument.
+ */
+int sctp_add_cmd(sctp_cmd_seq_t *seq, sctp_verb_t verb, sctp_arg_t obj);
+
+/* Return the next command structure in an sctp_cmd_seq.
+ * Return NULL at the end of the sequence.
+ */
+sctp_cmd_t *sctp_next_cmd(sctp_cmd_seq_t *seq);
+
+#endif /* __net_sctp_command_h__ */
+
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
new file mode 100644
index 000000000000..2b76c0f4babc
--- /dev/null
+++ b/include/net/sctp/constants.h
@@ -0,0 +1,432 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Randall Stewart       <randall@stewart.chicago.il.us>
+ *   Ken Morneau           <kmorneau@cisco.com>
+ *   Qiaobing Xie          <qxie1@motorola.com>
+ *   Xingang Guo           <xingang.guo@intel.com>
+ *   Sridhar Samudrala     <samudrala@us.ibm.com>
+ *   Daisy Chang           <daisyc@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_constants_h__
+#define __sctp_constants_h__
+
+#include <linux/tcp.h>  /* For TCP states used in sctp_sock_state_t */
+#include <linux/sctp.h>
+#include <linux/ipv6.h> /* For ipv6hdr. */
+#include <net/sctp/user.h>
+
+/* Value used for stream negotiation. */
+enum { SCTP_MAX_STREAM = 0xffff };
+enum { SCTP_DEFAULT_OUTSTREAMS = 10 };
+enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
+
+/* Since CIDs are sparse, we need all four of the following
+ * symbols.  CIDs are dense through SCTP_CID_BASE_MAX.
+ */
+#define SCTP_CID_BASE_MAX		SCTP_CID_SHUTDOWN_COMPLETE
+#define SCTP_CID_MAX			SCTP_CID_ASCONF_ACK
+
+#define SCTP_NUM_BASE_CHUNK_TYPES	(SCTP_CID_BASE_MAX + 1)
+#define SCTP_NUM_CHUNK_TYPES		(SCTP_NUM_BASE_CHUNKTYPES + 2)
+
+#define SCTP_NUM_ADDIP_CHUNK_TYPES	2
+
+#define SCTP_NUM_PRSCTP_CHUNK_TYPES	1
+
+/* These are the different flavours of event.  */
+typedef enum {
+
+	SCTP_EVENT_T_CHUNK = 1,
+	SCTP_EVENT_T_TIMEOUT,
+	SCTP_EVENT_T_OTHER,
+	SCTP_EVENT_T_PRIMITIVE
+
+} sctp_event_t;
+
+#define SCTP_EVENT_T_MAX SCTP_EVENT_T_PRIMITIVE
+#define SCTP_EVENT_T_NUM (SCTP_EVENT_T_MAX + 1)
+
+/* As a convenience for the state machine, we append SCTP_EVENT_* and
+ * SCTP_ULP_* to the list of possible chunks.
+ */
+
+typedef enum {
+	SCTP_EVENT_TIMEOUT_NONE = 0,
+	SCTP_EVENT_TIMEOUT_T1_COOKIE,
+	SCTP_EVENT_TIMEOUT_T1_INIT,
+	SCTP_EVENT_TIMEOUT_T2_SHUTDOWN,
+	SCTP_EVENT_TIMEOUT_T3_RTX,
+	SCTP_EVENT_TIMEOUT_T4_RTO,
+	SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD,
+	SCTP_EVENT_TIMEOUT_HEARTBEAT,
+	SCTP_EVENT_TIMEOUT_SACK,
+	SCTP_EVENT_TIMEOUT_AUTOCLOSE,
+} sctp_event_timeout_t;
+
+#define SCTP_EVENT_TIMEOUT_MAX		SCTP_EVENT_TIMEOUT_AUTOCLOSE
+#define SCTP_NUM_TIMEOUT_TYPES		(SCTP_EVENT_TIMEOUT_MAX + 1)
+
+typedef enum {
+	SCTP_EVENT_NO_PENDING_TSN = 0,
+	SCTP_EVENT_ICMP_PROTO_UNREACH,
+} sctp_event_other_t;
+
+#define SCTP_EVENT_OTHER_MAX		SCTP_EVENT_ICMP_PROTO_UNREACH
+#define SCTP_NUM_OTHER_TYPES		(SCTP_EVENT_OTHER_MAX + 1)
+
+/* These are primitive requests from the ULP.  */
+typedef enum {
+	SCTP_PRIMITIVE_ASSOCIATE = 0,
+	SCTP_PRIMITIVE_SHUTDOWN,
+	SCTP_PRIMITIVE_ABORT,
+	SCTP_PRIMITIVE_SEND,
+	SCTP_PRIMITIVE_REQUESTHEARTBEAT,
+	SCTP_PRIMITIVE_ASCONF,
+} sctp_event_primitive_t;
+
+#define SCTP_EVENT_PRIMITIVE_MAX	SCTP_PRIMITIVE_ASCONF
+#define SCTP_NUM_PRIMITIVE_TYPES	(SCTP_EVENT_PRIMITIVE_MAX + 1)
+
+/* We define here a utility type for manipulating subtypes.
+ * The subtype constructors all work like this:
+ *
+ * 	sctp_subtype_t foo = SCTP_ST_CHUNK(SCTP_CID_INIT);
+ */
+
+typedef union {
+	sctp_cid_t chunk;
+	sctp_event_timeout_t timeout;
+	sctp_event_other_t other;
+	sctp_event_primitive_t primitive;
+} sctp_subtype_t;
+
+#define SCTP_SUBTYPE_CONSTRUCTOR(_name, _type, _elt) \
+static inline sctp_subtype_t	\
+SCTP_ST_## _name (_type _arg)		\
+{ sctp_subtype_t _retval; _retval._elt = _arg; return _retval; }
+
+SCTP_SUBTYPE_CONSTRUCTOR(CHUNK,		sctp_cid_t,		chunk)
+SCTP_SUBTYPE_CONSTRUCTOR(TIMEOUT,	sctp_event_timeout_t,	timeout)
+SCTP_SUBTYPE_CONSTRUCTOR(OTHER,		sctp_event_other_t,	other)
+SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	sctp_event_primitive_t,	primitive)
+
+
+#define sctp_chunk_is_control(a) (a->chunk_hdr->type != SCTP_CID_DATA)
+#define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA)
+
+/* Calculate the actual data size in a data chunk */
+#define SCTP_DATA_SNDSIZE(c) ((int)((unsigned long)(c->chunk_end)\
+		       		- (unsigned long)(c->chunk_hdr)\
+				- sizeof(sctp_data_chunk_t)))
+
+#define SCTP_MAX_ERROR_CAUSE  SCTP_ERROR_NONEXIST_IP
+#define SCTP_NUM_ERROR_CAUSE  10
+
+/* Internal error codes */
+typedef enum {
+
+	SCTP_IERROR_NO_ERROR	        = 0,
+	SCTP_IERROR_BASE		= 1000,
+	SCTP_IERROR_NO_COOKIE,
+	SCTP_IERROR_BAD_SIG,
+	SCTP_IERROR_STALE_COOKIE,
+	SCTP_IERROR_NOMEM,
+	SCTP_IERROR_MALFORMED,
+	SCTP_IERROR_BAD_TAG,
+	SCTP_IERROR_BIG_GAP,
+	SCTP_IERROR_DUP_TSN,
+	SCTP_IERROR_HIGH_TSN,
+	SCTP_IERROR_IGNORE_TSN,
+	SCTP_IERROR_NO_DATA,
+	SCTP_IERROR_BAD_STREAM,
+	SCTP_IERROR_BAD_PORTS,
+
+} sctp_ierror_t;
+
+
+
+/* SCTP state defines for internal state machine */
+typedef enum {
+
+	SCTP_STATE_EMPTY		= 0,
+	SCTP_STATE_CLOSED		= 1,
+	SCTP_STATE_COOKIE_WAIT		= 2,
+	SCTP_STATE_COOKIE_ECHOED	= 3,
+	SCTP_STATE_ESTABLISHED		= 4,
+	SCTP_STATE_SHUTDOWN_PENDING	= 5,
+	SCTP_STATE_SHUTDOWN_SENT	= 6,
+	SCTP_STATE_SHUTDOWN_RECEIVED	= 7,
+	SCTP_STATE_SHUTDOWN_ACK_SENT	= 8,
+
+} sctp_state_t;
+
+#define SCTP_STATE_MAX			SCTP_STATE_SHUTDOWN_ACK_SENT
+#define SCTP_STATE_NUM_STATES		(SCTP_STATE_MAX + 1)
+
+/* These are values for sk->state.
+ * For a UDP-style SCTP socket, the states are defined as follows
+ * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
+ *   accept new associations, but it can initiate the creation of new ones.
+ * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
+ *   accept new  associations and can initiate the creation of new ones.
+ * - A socket in SCTP_SS_ESTABLISHED state indicates that it is a peeled off
+ *   socket with one association.
+ * For a TCP-style SCTP socket, the states are defined as follows
+ * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
+ *   accept new associations, but it can initiate the creation of new ones.
+ * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
+ *   accept new associations, but cannot initiate the creation of new ones.
+ * - A socket in SCTP_SS_ESTABLISHED state indicates that it has a single 
+ *   association.
+ */
+typedef enum {
+	SCTP_SS_CLOSED         = TCP_CLOSE,
+	SCTP_SS_LISTENING      = TCP_LISTEN,
+	SCTP_SS_ESTABLISHING   = TCP_SYN_SENT,
+	SCTP_SS_ESTABLISHED    = TCP_ESTABLISHED,
+	SCTP_SS_DISCONNECTING  = TCP_CLOSING,
+} sctp_sock_state_t;
+
+/* These functions map various type to printable names.  */
+const char *sctp_cname(const sctp_subtype_t);	/* chunk types */
+const char *sctp_oname(const sctp_subtype_t);	/* other events */
+const char *sctp_tname(const sctp_subtype_t);	/* timeouts */
+const char *sctp_pname(const sctp_subtype_t);	/* primitives */
+
+/* This is a table of printable names of sctp_state_t's.  */
+extern const char *sctp_state_tbl[], *sctp_evttype_tbl[], *sctp_status_tbl[];
+
+/* Maximum chunk length considering padding requirements. */
+enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
+
+/* Encourage Cookie-Echo bundling by pre-fragmenting chunks a little
+ * harder (until reaching ESTABLISHED state).
+ */
+enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 };
+
+/* Guess at how big to make the TSN mapping array.
+ * We guarantee that we can handle at least this big a gap between the
+ * cumulative ACK and the highest TSN.  In practice, we can often
+ * handle up to twice this value.
+ *
+ * NEVER make this more than 32767 (2^15-1).  The Gap Ack Blocks in a
+ * SACK (see  section 3.3.4) are only 16 bits, so 2*SCTP_TSN_MAP_SIZE
+ * must be less than 65535 (2^16 - 1), or we will have overflow
+ * problems creating SACK's.
+ */
+#define SCTP_TSN_MAP_SIZE 2048
+#define SCTP_TSN_MAX_GAP  65535
+
+/* We will not record more than this many duplicate TSNs between two
+ * SACKs.  The minimum PMTU is 576.  Remove all the headers and there
+ * is enough room for 131 duplicate reports.  Round down to the
+ * nearest power of 2.
+ */
+enum { SCTP_MIN_PMTU = 576 };
+enum { SCTP_MAX_DUP_TSNS = 16 };
+enum { SCTP_MAX_GABS = 16 };
+
+typedef enum {
+	SCTP_COUNTER_INIT_ERROR,
+} sctp_counter_t;
+
+/* How many counters does an association need? */
+#define SCTP_NUMBER_COUNTERS	5
+
+/* Here we define the default timers.  */
+
+/* cookie timer def = ? seconds */
+#define SCTP_DEFAULT_TIMEOUT_T1_COOKIE	(3 * HZ)
+
+/* init timer def = 3 seconds  */
+#define SCTP_DEFAULT_TIMEOUT_T1_INIT	(3 * HZ)
+
+/* shutdown timer def = 300 ms */
+#define SCTP_DEFAULT_TIMEOUT_T2_SHUTDOWN ((300 * HZ) / 1000)
+
+/* 0 seconds + RTO */
+#define SCTP_DEFAULT_TIMEOUT_HEARTBEAT	(10 * HZ)
+
+/* recv timer def = 200ms (in usec) */
+#define SCTP_DEFAULT_TIMEOUT_SACK	((200 * HZ) / 1000)
+#define SCTP_DEFAULT_TIMEOUT_SACK_MAX	((500 * HZ) / 1000) /* 500 ms */
+
+/* RTO.Initial              - 3  seconds
+ * RTO.Min                  - 1  second
+ * RTO.Max                  - 60 seconds
+ * RTO.Alpha                - 1/8
+ * RTO.Beta                 - 1/4
+ */
+#define SCTP_RTO_INITIAL	(3 * HZ)
+#define SCTP_RTO_MIN		(1 * HZ)
+#define SCTP_RTO_MAX		(60 * HZ)
+
+#define SCTP_RTO_ALPHA          3   /* 1/8 when converted to right shifts. */
+#define SCTP_RTO_BETA           2   /* 1/4 when converted to right shifts. */
+
+/* Maximum number of new data packets that can be sent in a burst.  */
+#define SCTP_MAX_BURST		4
+
+#define SCTP_CLOCK_GRANULARITY	1	/* 1 jiffy */
+
+#define SCTP_DEF_MAX_INIT 6
+#define SCTP_DEF_MAX_SEND 10
+
+#define SCTP_DEFAULT_COOKIE_LIFE_SEC	60 /* seconds */
+#define SCTP_DEFAULT_COOKIE_LIFE_USEC	0  /* microseconds */
+
+#define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
+#define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
+#define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
+                                         * to which we will raise the P-MTU.
+					 */
+#define SCTP_DEFAULT_MINSEGMENT 512	/* MTU size ... if no mtu disc */
+#define SCTP_HOW_MANY_SECRETS 2		/* How many secrets I keep */
+#define SCTP_HOW_LONG_COOKIE_LIVE 3600	/* How many seconds the current
+					 * secret will live?
+					 */
+#define SCTP_SECRET_SIZE 32		/* Number of octets in a 256 bits. */
+
+#define SCTP_SIGNATURE_SIZE 20	        /* size of a SLA-1 signature */
+
+#define SCTP_COOKIE_MULTIPLE 32 /* Pad out our cookie to make our hash
+				 * functions simpler to write.
+				 */
+
+#if defined (CONFIG_SCTP_HMAC_MD5)
+#define SCTP_COOKIE_HMAC_ALG "md5"
+#elif defined (CONFIG_SCTP_HMAC_SHA1)
+#define SCTP_COOKIE_HMAC_ALG "sha1"
+#else
+#define SCTP_COOKIE_HMAC_ALG NULL
+#endif
+
+/* These return values describe the success or failure of a number of
+ * routines which form the lower interface to SCTP_outqueue.
+ */
+typedef enum {
+	SCTP_XMIT_OK,
+	SCTP_XMIT_PMTU_FULL,
+	SCTP_XMIT_RWND_FULL,
+	SCTP_XMIT_NAGLE_DELAY,
+} sctp_xmit_t;
+
+/* These are the commands for manipulating transports.  */
+typedef enum {
+	SCTP_TRANSPORT_UP,
+	SCTP_TRANSPORT_DOWN,
+} sctp_transport_cmd_t;
+
+/* These are the address scopes defined mainly for IPv4 addresses
+ * based on draft of SCTP IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>.
+ * These scopes are hopefully generic enough to be used on scoping both
+ * IPv4 and IPv6 addresses in SCTP.
+ * At this point, the IPv6 scopes will be mapped to these internal scopes
+ * as much as possible.
+ */
+typedef enum {
+	SCTP_SCOPE_GLOBAL,		/* IPv4 global addresses */
+	SCTP_SCOPE_PRIVATE,		/* IPv4 private addresses */
+	SCTP_SCOPE_LINK,		/* IPv4 link local address */
+	SCTP_SCOPE_LOOPBACK,		/* IPv4 loopback address */
+	SCTP_SCOPE_UNUSABLE,		/* IPv4 unusable addresses */
+} sctp_scope_t;
+
+/* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
+ * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24,
+ * 192.88.99.0/24.
+ * Also, RFC 8.4, non-unicast addresses are not considered valid SCTP
+ * addresses.
+ */
+#define IS_IPV4_UNUSABLE_ADDRESS(a) \
+	((INADDR_BROADCAST == *a) || \
+	(MULTICAST(*a)) || \
+	(((unsigned char *)(a))[0] == 0) || \
+	((((unsigned char *)(a))[0] == 198) && \
+	(((unsigned char *)(a))[1] == 18) && \
+	(((unsigned char *)(a))[2] == 0)) || \
+	((((unsigned char *)(a))[0] == 192) && \
+	(((unsigned char *)(a))[1] == 88) && \
+	(((unsigned char *)(a))[2] == 99)))
+
+/* IPv4 Link-local addresses: 169.254.0.0/16.  */
+#define IS_IPV4_LINK_ADDRESS(a) \
+	((((unsigned char *)(a))[0] == 169) && \
+	(((unsigned char *)(a))[1] == 254))
+
+/* RFC 1918 "Address Allocation for Private Internets" defines the IPv4
+ * private address space as the following:
+ *
+ * 10.0.0.0 - 10.255.255.255 (10/8 prefix)
+ * 172.16.0.0.0 - 172.31.255.255 (172.16/12 prefix)
+ * 192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
+ */
+#define IS_IPV4_PRIVATE_ADDRESS(a) \
+	((((unsigned char *)(a))[0] == 10) || \
+	((((unsigned char *)(a))[0] == 172) && \
+	(((unsigned char *)(a))[1] >= 16) && \
+	(((unsigned char *)(a))[1] < 32)) || \
+	((((unsigned char *)(a))[0] == 192) && \
+	(((unsigned char *)(a))[1] == 168)))
+
+/* Flags used for the bind address copy functions.  */
+#define SCTP_ADDR6_ALLOWED	0x00000001	/* IPv6 address is allowed by
+						   local sock family */
+#define SCTP_ADDR4_PEERSUPP	0x00000002	/* IPv4 address is supported by
+						   peer */
+#define SCTP_ADDR6_PEERSUPP	0x00000004	/* IPv6 address is supported by
+						   peer */
+
+/* Reasons to retransmit. */
+typedef enum {
+	SCTP_RTXR_T3_RTX,
+	SCTP_RTXR_FAST_RTX,
+	SCTP_RTXR_PMTUD,
+} sctp_retransmit_reason_t;
+
+/* Reasons to lower cwnd. */
+typedef enum {
+	SCTP_LOWER_CWND_T3_RTX,
+	SCTP_LOWER_CWND_FAST_RTX,
+	SCTP_LOWER_CWND_ECNE,
+	SCTP_LOWER_CWND_INACTIVE,
+} sctp_lower_cwnd_t;
+
+#endif /* __sctp_constants_h__ */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
new file mode 100644
index 000000000000..960abfa48d68
--- /dev/null
+++ b/include/net/sctp/sctp.h
@@ -0,0 +1,620 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001-2003 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * The base lksctp header.
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Xingang Guo           <xingang.guo@intel.com>
+ *    Jon Grimm             <jgrimm@us.ibm.com>
+ *    Daisy Chang           <daisyc@us.ibm.com>
+ *    Sridhar Samudrala     <sri@us.ibm.com>
+ *    Ardelle Fan           <ardelle.fan@intel.com>
+ *    Ryan Layer            <rmlayer@us.ibm.com>
+ *    Kevin Gao             <kevin.gao@intel.com> 
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __net_sctp_h__
+#define __net_sctp_h__
+
+/* Header Strategy.
+ *    Start getting some control over the header file depencies:
+ *       includes
+ *       constants
+ *       structs
+ *       prototypes
+ *       macros, externs, and inlines
+ *
+ *   Move test_frame specific items out of the kernel headers
+ *   and into the test frame headers.   This is not perfect in any sense
+ *   and will continue to evolve.
+ */
+
+
+#include <linux/config.h>
+
+#ifdef TEST_FRAME
+#undef CONFIG_PROC_FS
+#undef CONFIG_SCTP_DBG_OBJCNT
+#undef CONFIG_SYSCTL
+#endif /* TEST_FRAME */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/in.h>
+#include <linux/tty.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/idr.h>
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#endif
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <net/sctp/structs.h>
+#include <net/sctp/constants.h>
+
+
+/* Set SCTP_DEBUG flag via config if not already set. */
+#ifndef SCTP_DEBUG
+#ifdef CONFIG_SCTP_DBG_MSG
+#define SCTP_DEBUG	1
+#else
+#define SCTP_DEBUG      0
+#endif /* CONFIG_SCTP_DBG */
+#endif /* SCTP_DEBUG */
+
+#ifdef CONFIG_IP_SCTP_MODULE
+#define SCTP_PROTOSW_FLAG 0
+#else /* static! */
+#define SCTP_PROTOSW_FLAG INET_PROTOSW_PERMANENT
+#endif
+
+
+/* Certain internal static functions need to be exported when
+ * compiled into the test frame.
+ */
+#ifndef SCTP_STATIC
+#define SCTP_STATIC static
+#endif
+
+/*
+ * Function declarations.
+ */
+
+/*
+ * sctp/protocol.c
+ */
+extern struct sock *sctp_get_ctl_sock(void);
+extern int sctp_copy_local_addr_list(struct sctp_bind_addr *,
+				     sctp_scope_t, int gfp, int flags);
+extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family);
+extern int sctp_register_pf(struct sctp_pf *, sa_family_t);
+
+/*
+ * sctp/socket.c
+ */
+int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
+int sctp_inet_listen(struct socket *sock, int backlog);
+void sctp_write_space(struct sock *sk);
+unsigned int sctp_poll(struct file *file, struct socket *sock,
+		poll_table *wait);
+
+/*
+ * sctp/primitive.c
+ */
+int sctp_primitive_ASSOCIATE(struct sctp_association *, void *arg);
+int sctp_primitive_SHUTDOWN(struct sctp_association *, void *arg);
+int sctp_primitive_ABORT(struct sctp_association *, void *arg);
+int sctp_primitive_SEND(struct sctp_association *, void *arg);
+int sctp_primitive_REQUESTHEARTBEAT(struct sctp_association *, void *arg);
+int sctp_primitive_ASCONF(struct sctp_association *, void *arg);
+
+/*
+ * sctp/crc32c.c
+ */
+__u32 sctp_start_cksum(__u8 *ptr, __u16 count);
+__u32 sctp_update_cksum(__u8 *ptr, __u16 count, __u32 cksum);
+__u32 sctp_end_cksum(__u32 cksum);
+__u32 sctp_update_copy_cksum(__u8 *, __u8 *, __u16 count, __u32 cksum);
+
+/*
+ * sctp/input.c
+ */
+int sctp_rcv(struct sk_buff *skb);
+void sctp_v4_err(struct sk_buff *skb, u32 info);
+void sctp_hash_established(struct sctp_association *);
+void sctp_unhash_established(struct sctp_association *);
+void sctp_hash_endpoint(struct sctp_endpoint *);
+void sctp_unhash_endpoint(struct sctp_endpoint *);
+struct sock *sctp_err_lookup(int family, struct sk_buff *,
+			     struct sctphdr *, struct sctp_endpoint **,
+			     struct sctp_association **,
+			     struct sctp_transport **);
+void sctp_err_finish(struct sock *, struct sctp_endpoint *,
+			    struct sctp_association *);
+void sctp_icmp_frag_needed(struct sock *, struct sctp_association *,
+			   struct sctp_transport *t, __u32 pmtu);
+void sctp_icmp_proto_unreachable(struct sock *sk,
+				 struct sctp_endpoint *ep,
+				 struct sctp_association *asoc,
+				 struct sctp_transport *t);
+
+/*
+ *  Section:  Macros, externs, and inlines
+ */
+
+
+#ifdef TEST_FRAME
+#include <test_frame.h>
+#else
+
+/* spin lock wrappers. */
+#define sctp_spin_lock_irqsave(lock, flags) spin_lock_irqsave(lock, flags)
+#define sctp_spin_unlock_irqrestore(lock, flags)  \
+       spin_unlock_irqrestore(lock, flags)
+#define sctp_local_bh_disable() local_bh_disable()
+#define sctp_local_bh_enable()  local_bh_enable()
+#define sctp_spin_lock(lock)    spin_lock(lock)
+#define sctp_spin_unlock(lock)  spin_unlock(lock)
+#define sctp_write_lock(lock)   write_lock(lock)
+#define sctp_write_unlock(lock) write_unlock(lock)
+#define sctp_read_lock(lock)    read_lock(lock)
+#define sctp_read_unlock(lock)  read_unlock(lock)
+
+/* sock lock wrappers. */
+#define sctp_lock_sock(sk)       lock_sock(sk)
+#define sctp_release_sock(sk)    release_sock(sk)
+#define sctp_bh_lock_sock(sk)    bh_lock_sock(sk)
+#define sctp_bh_unlock_sock(sk)  bh_unlock_sock(sk)
+#define SCTP_SOCK_SLEEP_PRE(sk)  SOCK_SLEEP_PRE(sk)
+#define SCTP_SOCK_SLEEP_POST(sk) SOCK_SLEEP_POST(sk)
+
+/* SCTP SNMP MIB stats handlers */
+DECLARE_SNMP_STAT(struct sctp_mib, sctp_statistics);
+#define SCTP_INC_STATS(field)      SNMP_INC_STATS(sctp_statistics, field)
+#define SCTP_INC_STATS_BH(field)   SNMP_INC_STATS_BH(sctp_statistics, field)
+#define SCTP_INC_STATS_USER(field) SNMP_INC_STATS_USER(sctp_statistics, field)
+#define SCTP_DEC_STATS(field)      SNMP_DEC_STATS(sctp_statistics, field)
+
+#endif /* !TEST_FRAME */
+
+
+/* Print debugging messages.  */
+#if SCTP_DEBUG
+extern int sctp_debug_flag;
+#define SCTP_DEBUG_PRINTK(whatever...) \
+	((void) (sctp_debug_flag && printk(KERN_DEBUG whatever)))
+#define SCTP_ENABLE_DEBUG { sctp_debug_flag = 1; }
+#define SCTP_DISABLE_DEBUG { sctp_debug_flag = 0; }
+
+#define SCTP_ASSERT(expr, str, func) \
+	if (!(expr)) { \
+		SCTP_DEBUG_PRINTK("Assertion Failed: %s(%s) at %s:%s:%d\n", \
+			str, (#expr), __FILE__, __FUNCTION__, __LINE__); \
+		func; \
+	}
+
+#else	/* SCTP_DEBUG */
+
+#define SCTP_DEBUG_PRINTK(whatever...)
+#define SCTP_ENABLE_DEBUG
+#define SCTP_DISABLE_DEBUG
+#define SCTP_ASSERT(expr, str, func)
+
+#endif /* SCTP_DEBUG */
+
+
+/*
+ * Macros for keeping a global reference of object allocations.
+ */
+#ifdef CONFIG_SCTP_DBG_OBJCNT
+
+extern atomic_t sctp_dbg_objcnt_sock;
+extern atomic_t sctp_dbg_objcnt_ep;
+extern atomic_t sctp_dbg_objcnt_assoc;
+extern atomic_t sctp_dbg_objcnt_transport;
+extern atomic_t sctp_dbg_objcnt_chunk;
+extern atomic_t sctp_dbg_objcnt_bind_addr;
+extern atomic_t sctp_dbg_objcnt_bind_bucket;
+extern atomic_t sctp_dbg_objcnt_addr;
+extern atomic_t sctp_dbg_objcnt_ssnmap;
+extern atomic_t sctp_dbg_objcnt_datamsg;
+
+/* Macros to atomically increment/decrement objcnt counters.  */
+#define SCTP_DBG_OBJCNT_INC(name) \
+atomic_inc(&sctp_dbg_objcnt_## name)
+#define SCTP_DBG_OBJCNT_DEC(name) \
+atomic_dec(&sctp_dbg_objcnt_## name)
+#define SCTP_DBG_OBJCNT(name) \
+atomic_t sctp_dbg_objcnt_## name = ATOMIC_INIT(0)
+
+/* Macro to help create new entries in in the global array of
+ * objcnt counters.
+ */
+#define SCTP_DBG_OBJCNT_ENTRY(name) \
+{.label= #name, .counter= &sctp_dbg_objcnt_## name}
+
+void sctp_dbg_objcnt_init(void);
+void sctp_dbg_objcnt_exit(void);
+
+#else
+
+#define SCTP_DBG_OBJCNT_INC(name)
+#define SCTP_DBG_OBJCNT_DEC(name)
+
+static inline void sctp_dbg_objcnt_init(void) { return; }
+static inline void sctp_dbg_objcnt_exit(void) { return; }
+
+#endif /* CONFIG_SCTP_DBG_OBJCOUNT */
+
+#if defined CONFIG_SYSCTL
+void sctp_sysctl_register(void);
+void sctp_sysctl_unregister(void);
+#else
+static inline void sctp_sysctl_register(void) { return; }
+static inline void sctp_sysctl_unregister(void) { return; }
+static inline int sctp_sysctl_jiffies_ms(ctl_table *table, int __user *name, int nlen,
+		void __user *oldval, size_t __user *oldlenp,
+		void __user *newval, size_t newlen, void **context) {
+	return -ENOSYS;
+}
+#endif
+
+/* Size of Supported Address Parameter for 'x' address types. */
+#define SCTP_SAT_LEN(x) (sizeof(struct sctp_paramhdr) + (x) * sizeof(__u16))
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+
+int sctp_v6_init(void);
+void sctp_v6_exit(void);
+
+#else /* #ifdef defined(CONFIG_IPV6) */
+
+static inline int sctp_v6_init(void) { return 0; }
+static inline void sctp_v6_exit(void) { return; }
+
+#endif /* #if defined(CONFIG_IPV6) */
+
+/* Some wrappers, in case crypto not available. */
+#if defined (CONFIG_CRYPTO_HMAC)
+#define sctp_crypto_alloc_tfm crypto_alloc_tfm
+#define sctp_crypto_free_tfm crypto_free_tfm
+#define sctp_crypto_hmac crypto_hmac
+#else
+#define sctp_crypto_alloc_tfm(x...) NULL
+#define sctp_crypto_free_tfm(x...)
+#define sctp_crypto_hmac(x...)
+#endif
+
+
+/* Map an association to an assoc_id. */
+static inline sctp_assoc_t sctp_assoc2id(const struct sctp_association *asoc)
+{
+	return (asoc?asoc->assoc_id:0);
+}
+
+/* Look up the association by its id.  */
+struct sctp_association *sctp_id2assoc(struct sock *sk, sctp_assoc_t id);
+
+
+/* A macro to walk a list of skbs.  */
+#define sctp_skb_for_each(pos, head, tmp) \
+for (pos = (head)->next;\
+     tmp = (pos)->next, pos != ((struct sk_buff *)(head));\
+     pos = tmp)
+
+
+/* A helper to append an entire skb list (list) to another (head). */
+static inline void sctp_skb_list_tail(struct sk_buff_head *list,
+				      struct sk_buff_head *head)
+{
+	unsigned long flags;
+
+	sctp_spin_lock_irqsave(&head->lock, flags);
+	sctp_spin_lock(&list->lock);
+
+	list_splice((struct list_head *)list, (struct list_head *)head->prev);
+
+	head->qlen += list->qlen;
+	list->qlen = 0;
+
+	sctp_spin_unlock(&list->lock);
+	sctp_spin_unlock_irqrestore(&head->lock, flags);
+}
+
+/**
+ *	sctp_list_dequeue - remove from the head of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the head of the list. The head item is
+ *	returned or %NULL if the list is empty.
+ */
+
+static inline struct list_head *sctp_list_dequeue(struct list_head *list)
+{
+	struct list_head *result = NULL;
+
+	if (list->next != list) {
+		result = list->next;
+		list->next = result->next;
+		list->next->prev = list;
+		INIT_LIST_HEAD(result);
+	}
+	return result;
+}
+
+/* Tests if the list has one and only one entry. */
+static inline int sctp_list_single_entry(struct list_head *head)
+{
+	return ((head->next != head) && (head->next == head->prev));
+}
+
+/* Calculate the size (in bytes) occupied by the data of an iovec.  */
+static inline size_t get_user_iov_size(struct iovec *iov, int iovlen)
+{
+	size_t retval = 0;
+
+	for (; iovlen > 0; --iovlen) {
+		retval += iov->iov_len;
+		iov++;
+	}
+
+	return retval;
+}
+
+/* Generate a random jitter in the range of -50% ~ +50% of input RTO. */
+static inline __s32 sctp_jitter(__u32 rto)
+{
+	static __u32 sctp_rand;
+	__s32 ret;
+
+	/* Avoid divide by zero. */
+	if (!rto)
+		rto = 1;
+
+	sctp_rand += jiffies;
+	sctp_rand ^= (sctp_rand << 12);
+	sctp_rand ^= (sctp_rand >> 20);
+
+	/* Choose random number from 0 to rto, then move to -50% ~ +50%
+	 * of rto.
+	 */
+	ret = sctp_rand % rto - (rto >> 1);
+	return ret;
+}
+
+/* Break down data chunks at this point.  */
+static inline int sctp_frag_point(const struct sctp_sock *sp, int pmtu)
+{
+	int frag = pmtu;
+
+	frag -= sp->pf->af->net_header_len;
+	frag -= sizeof(struct sctphdr) + sizeof(struct sctp_data_chunk);
+
+	if (sp->user_frag)
+		frag = min_t(int, frag, sp->user_frag);
+
+	frag = min_t(int, frag, SCTP_MAX_CHUNK_LEN);
+
+	return frag;
+}
+
+/* Walk through a list of TLV parameters.  Don't trust the
+ * individual parameter lengths and instead depend on
+ * the chunk length to indicate when to stop.  Make sure
+ * there is room for a param header too.
+ */
+#define sctp_walk_params(pos, chunk, member)\
+_sctp_walk_params((pos), (chunk), WORD_ROUND(ntohs((chunk)->chunk_hdr.length)), member)
+
+#define _sctp_walk_params(pos, chunk, end, member)\
+for (pos.v = chunk->member;\
+     pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
+     pos.v <= (void *)chunk + end - WORD_ROUND(ntohs(pos.p->length)) &&\
+     ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
+     pos.v += WORD_ROUND(ntohs(pos.p->length)))
+
+#define sctp_walk_errors(err, chunk_hdr)\
+_sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length))
+
+#define _sctp_walk_errors(err, chunk_hdr, end)\
+for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
+	    sizeof(sctp_chunkhdr_t));\
+     (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
+     (void *)err <= (void *)chunk_hdr + end - WORD_ROUND(ntohs(err->length)) &&\
+     ntohs(err->length) >= sizeof(sctp_errhdr_t); \
+     err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
+
+#define sctp_walk_fwdtsn(pos, chunk)\
+_sctp_walk_fwdtsn((pos), (chunk), ntohs((chunk)->chunk_hdr->length) - sizeof(struct sctp_fwdtsn_chunk))
+
+#define _sctp_walk_fwdtsn(pos, chunk, end)\
+for (pos = chunk->subh.fwdtsn_hdr->skip;\
+     (void *)pos <= (void *)chunk->subh.fwdtsn_hdr->skip + end - sizeof(struct sctp_fwdtsn_skip);\
+     pos++)
+
+/* Round an int up to the next multiple of 4.  */
+#define WORD_ROUND(s) (((s)+3)&~3)
+
+/* Make a new instance of type.  */
+#define t_new(type, flags)	(type *)kmalloc(sizeof(type), flags)
+
+/* Compare two timevals.  */
+#define tv_lt(s, t) \
+   (s.tv_sec < t.tv_sec || (s.tv_sec == t.tv_sec && s.tv_usec < t.tv_usec))
+
+/* Add tv1 to tv2. */
+#define TIMEVAL_ADD(tv1, tv2) \
+({ \
+        suseconds_t usecs = (tv2).tv_usec + (tv1).tv_usec; \
+        time_t secs = (tv2).tv_sec + (tv1).tv_sec; \
+\
+        if (usecs >= 1000000) { \
+                usecs -= 1000000; \
+                secs++; \
+        } \
+        (tv2).tv_sec = secs; \
+        (tv2).tv_usec = usecs; \
+})
+
+/* External references. */
+
+extern struct proto sctp_prot;
+extern struct proto sctpv6_prot;
+extern struct proc_dir_entry *proc_net_sctp;
+void sctp_put_port(struct sock *sk);
+
+extern struct idr sctp_assocs_id;
+extern spinlock_t sctp_assocs_id_lock;
+
+/* Static inline functions. */
+
+/* Convert from an IP version number to an Address Family symbol.  */
+static inline int ipver2af(__u8 ipver)
+{
+	switch (ipver) {
+	case 4:
+	        return  AF_INET;
+	case 6:
+		return AF_INET6;
+	default:
+		return 0;
+	};
+}
+
+/* Convert from an address parameter type to an address family.  */
+static inline int param_type2af(__u16 type)
+{
+	switch (type) {
+	case SCTP_PARAM_IPV4_ADDRESS:
+	        return  AF_INET;
+	case SCTP_PARAM_IPV6_ADDRESS:
+		return AF_INET6;
+	default:
+		return 0;
+	};
+}
+
+/* Perform some sanity checks. */
+static inline int sctp_sanity_check(void)
+{
+	SCTP_ASSERT(sizeof(struct sctp_ulpevent) <=
+		    sizeof(((struct sk_buff *)0)->cb),
+		    "SCTP: ulpevent does not fit in skb!\n", return 0);
+
+	return 1;
+}
+
+/* Warning: The following hash functions assume a power of two 'size'. */
+/* This is the hash function for the SCTP port hash table. */
+static inline int sctp_phashfn(__u16 lport)
+{
+	return (lport & (sctp_port_hashsize - 1));
+}
+
+/* This is the hash function for the endpoint hash table. */
+static inline int sctp_ep_hashfn(__u16 lport)
+{
+	return (lport & (sctp_ep_hashsize - 1));
+}
+
+/* This is the hash function for the association hash table. */
+static inline int sctp_assoc_hashfn(__u16 lport, __u16 rport)
+{
+	int h = (lport << 16) + rport;
+	h ^= h>>8;
+	return (h & (sctp_assoc_hashsize - 1));
+}
+
+/* This is the hash function for the association hash table.  This is
+ * not used yet, but could be used as a better hash function when
+ * we have a vtag.
+ */
+static inline int sctp_vtag_hashfn(__u16 lport, __u16 rport, __u32 vtag)
+{
+	int h = (lport << 16) + rport;
+	h ^= vtag;
+	return (h & (sctp_assoc_hashsize-1));
+}
+
+/* Is a socket of this style? */
+#define sctp_style(sk, style) __sctp_style((sk), (SCTP_SOCKET_##style))
+static inline int __sctp_style(const struct sock *sk, sctp_socket_type_t style)
+{
+	return sctp_sk(sk)->type == style;
+}
+
+/* Is the association in this state? */
+#define sctp_state(asoc, state) __sctp_state((asoc), (SCTP_STATE_##state))
+static inline int __sctp_state(const struct sctp_association *asoc,
+			       sctp_state_t state)
+{
+	return asoc->state == state;
+}
+
+/* Is the socket in this state? */
+#define sctp_sstate(sk, state) __sctp_sstate((sk), (SCTP_SS_##state))
+static inline int __sctp_sstate(const struct sock *sk, sctp_sock_state_t state)
+{
+	return sk->sk_state == state;
+}
+
+/* Map v4-mapped v6 address back to v4 address */
+static inline void sctp_v6_map_v4(union sctp_addr *addr)
+{
+	addr->v4.sin_family = AF_INET;
+	addr->v4.sin_port = addr->v6.sin6_port;
+	addr->v4.sin_addr.s_addr = addr->v6.sin6_addr.s6_addr32[3];
+}
+
+/* Map v4 address to v4-mapped v6 address */
+static inline void sctp_v4_map_v6(union sctp_addr *addr)
+{
+	addr->v6.sin6_family = AF_INET6;
+	addr->v6.sin6_port = addr->v4.sin_port;
+	addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
+	addr->v6.sin6_addr.s6_addr32[0] = 0;
+	addr->v6.sin6_addr.s6_addr32[1] = 0;
+	addr->v6.sin6_addr.s6_addr32[2] = htonl(0x0000ffff);
+}
+
+#endif /* __net_sctp_h__ */
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
new file mode 100644
index 000000000000..5576db56324d
--- /dev/null
+++ b/include/net/sctp/sm.h
@@ -0,0 +1,442 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * These are definitions needed by the state machine.
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson <karl@athena.chicago.il.us>
+ *    Xingang Guo <xingang.guo@intel.com>
+ *    Jon Grimm <jgrimm@us.ibm.com>
+ *    Dajiang Zhang <dajiang.zhang@nokia.com>
+ *    Sridhar Samudrala <sri@us.ibm.com>
+ *    Daisy Chang <daisyc@us.ibm.com>
+ *    Ardelle Fan <ardelle.fan@intel.com>
+ *    Kevin Gao <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <linux/in.h>
+#include <net/sctp/command.h>
+#include <net/sctp/sctp.h>
+
+#ifndef __sctp_sm_h__
+#define __sctp_sm_h__
+
+/*
+ * Possible values for the disposition are:
+ */
+typedef enum {
+	SCTP_DISPOSITION_DISCARD,	 /* No further processing.  */
+	SCTP_DISPOSITION_CONSUME,	 /* Process return values normally.  */
+	SCTP_DISPOSITION_NOMEM,		 /* We ran out of memory--recover.  */
+	SCTP_DISPOSITION_DELETE_TCB,	 /* Close the association.  */
+	SCTP_DISPOSITION_ABORT,		 /* Close the association NOW.  */
+	SCTP_DISPOSITION_VIOLATION,	 /* The peer is misbehaving.  */
+	SCTP_DISPOSITION_NOT_IMPL,	 /* This entry is not implemented.  */
+	SCTP_DISPOSITION_ERROR,		 /* This is plain old user error.  */
+	SCTP_DISPOSITION_BUG,		 /* This is a bug.  */
+} sctp_disposition_t;
+
+typedef struct {
+	int name;
+	int action;
+} sctp_sm_command_t;
+
+typedef sctp_disposition_t (sctp_state_fn_t) (const struct sctp_endpoint *,
+					      const struct sctp_association *,
+					      const sctp_subtype_t type,
+					      void *arg,
+					      sctp_cmd_seq_t *);
+typedef void (sctp_timer_event_t) (unsigned long);
+typedef struct {
+	sctp_state_fn_t *fn;
+	const char *name;
+} sctp_sm_table_entry_t;
+
+/* A naming convention of "sctp_sf_xxx" applies to all the state functions
+ * currently in use.
+ */
+
+/* Prototypes for generic state functions. */
+sctp_state_fn_t sctp_sf_not_impl;
+sctp_state_fn_t sctp_sf_bug;
+
+/* Prototypes for gener timer state functions. */
+sctp_state_fn_t sctp_sf_timer_ignore;
+
+/* Prototypes for chunk state functions. */
+sctp_state_fn_t sctp_sf_do_9_1_abort;
+sctp_state_fn_t sctp_sf_cookie_wait_abort;
+sctp_state_fn_t sctp_sf_cookie_echoed_abort;
+sctp_state_fn_t sctp_sf_shutdown_pending_abort;
+sctp_state_fn_t sctp_sf_shutdown_sent_abort;
+sctp_state_fn_t sctp_sf_shutdown_ack_sent_abort;
+sctp_state_fn_t sctp_sf_do_5_1B_init;
+sctp_state_fn_t sctp_sf_do_5_1C_ack;
+sctp_state_fn_t sctp_sf_do_5_1D_ce;
+sctp_state_fn_t sctp_sf_do_5_1E_ca;
+sctp_state_fn_t sctp_sf_do_4_C;
+sctp_state_fn_t sctp_sf_eat_data_6_2;
+sctp_state_fn_t sctp_sf_eat_data_fast_4_4;
+sctp_state_fn_t sctp_sf_eat_sack_6_2;
+sctp_state_fn_t sctp_sf_tabort_8_4_8;
+sctp_state_fn_t sctp_sf_operr_notify;
+sctp_state_fn_t sctp_sf_t1_timer_expire;
+sctp_state_fn_t sctp_sf_t2_timer_expire;
+sctp_state_fn_t sctp_sf_t4_timer_expire;
+sctp_state_fn_t sctp_sf_t5_timer_expire;
+sctp_state_fn_t sctp_sf_sendbeat_8_3;
+sctp_state_fn_t sctp_sf_beat_8_3;
+sctp_state_fn_t sctp_sf_backbeat_8_3;
+sctp_state_fn_t sctp_sf_do_9_2_final;
+sctp_state_fn_t sctp_sf_do_9_2_shutdown;
+sctp_state_fn_t sctp_sf_do_ecn_cwr;
+sctp_state_fn_t sctp_sf_do_ecne;
+sctp_state_fn_t sctp_sf_ootb;
+sctp_state_fn_t sctp_sf_pdiscard;
+sctp_state_fn_t sctp_sf_violation;
+sctp_state_fn_t sctp_sf_violation_chunklen;
+sctp_state_fn_t sctp_sf_discard_chunk;
+sctp_state_fn_t sctp_sf_do_5_2_1_siminit;
+sctp_state_fn_t sctp_sf_do_5_2_2_dupinit;
+sctp_state_fn_t sctp_sf_do_5_2_4_dupcook;
+sctp_state_fn_t sctp_sf_unk_chunk;
+sctp_state_fn_t sctp_sf_do_8_5_1_E_sa;
+sctp_state_fn_t sctp_sf_cookie_echoed_err;
+sctp_state_fn_t sctp_sf_do_asconf;
+sctp_state_fn_t sctp_sf_do_asconf_ack;
+sctp_state_fn_t sctp_sf_do_9_2_reshutack;
+sctp_state_fn_t sctp_sf_eat_fwd_tsn;
+sctp_state_fn_t sctp_sf_eat_fwd_tsn_fast;
+
+/* Prototypes for primitive event state functions.  */
+sctp_state_fn_t sctp_sf_do_prm_asoc;
+sctp_state_fn_t sctp_sf_do_prm_send;
+sctp_state_fn_t sctp_sf_do_9_2_prm_shutdown;
+sctp_state_fn_t sctp_sf_cookie_wait_prm_shutdown;
+sctp_state_fn_t sctp_sf_cookie_echoed_prm_shutdown;
+sctp_state_fn_t sctp_sf_do_9_1_prm_abort;
+sctp_state_fn_t sctp_sf_cookie_wait_prm_abort;
+sctp_state_fn_t sctp_sf_cookie_echoed_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_pending_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_sent_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_ack_sent_prm_abort;
+sctp_state_fn_t sctp_sf_error_closed;
+sctp_state_fn_t sctp_sf_error_shutdown;
+sctp_state_fn_t sctp_sf_ignore_primitive;
+sctp_state_fn_t sctp_sf_do_prm_requestheartbeat;
+sctp_state_fn_t sctp_sf_do_prm_asconf;
+
+/* Prototypes for other event state functions.  */
+sctp_state_fn_t sctp_sf_do_9_2_start_shutdown;
+sctp_state_fn_t sctp_sf_do_9_2_shutdown_ack;
+sctp_state_fn_t sctp_sf_ignore_other;
+sctp_state_fn_t sctp_sf_cookie_wait_icmp_abort;
+
+/* Prototypes for timeout event state functions.  */
+sctp_state_fn_t sctp_sf_do_6_3_3_rtx;
+sctp_state_fn_t sctp_sf_do_6_2_sack;
+sctp_state_fn_t sctp_sf_autoclose_timer_expire;
+
+/* Prototypes for utility support functions.  */
+__u8 sctp_get_chunk_type(struct sctp_chunk *chunk);
+const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t,
+					    sctp_state_t,
+					    sctp_subtype_t);
+int sctp_chunk_iif(const struct sctp_chunk *);
+struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *,
+					     struct sctp_chunk *,
+					     int gfp);
+__u32 sctp_generate_verification_tag(void);
+void sctp_populate_tie_tags(__u8 *cookie, __u32 curTag, __u32 hisTag);
+
+/* Prototypes for chunk-building functions.  */
+struct sctp_chunk *sctp_make_init(const struct sctp_association *,
+			     const struct sctp_bind_addr *,
+			     int gfp, int vparam_len);
+struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *,
+				 const struct sctp_chunk *,
+				 const int gfp,
+				 const int unkparam_len);
+struct sctp_chunk *sctp_make_cookie_echo(const struct sctp_association *,
+				    const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_cookie_ack(const struct sctp_association *,
+				   const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_cwr(const struct sctp_association *,
+				 const __u32 lowest_tsn,
+				 const struct sctp_chunk *);
+struct sctp_chunk * sctp_make_datafrag_empty(struct sctp_association *,
+					const struct sctp_sndrcvinfo *sinfo,
+					int len, const __u8 flags,
+					__u16 ssn);
+struct sctp_chunk *sctp_make_ecne(const struct sctp_association *,
+				  const __u32);
+struct sctp_chunk *sctp_make_sack(const struct sctp_association *);
+struct sctp_chunk *sctp_make_shutdown(const struct sctp_association *asoc,
+				      const struct sctp_chunk *chunk);
+struct sctp_chunk *sctp_make_shutdown_ack(const struct sctp_association *asoc,
+					  const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_shutdown_complete(const struct sctp_association *,
+					  const struct sctp_chunk *);
+void sctp_init_cause(struct sctp_chunk *, __u16 cause, const void *, size_t);
+struct sctp_chunk *sctp_make_abort(const struct sctp_association *,
+			      const struct sctp_chunk *,
+			      const size_t hint);
+struct sctp_chunk *sctp_make_abort_no_data(const struct sctp_association *,
+				      const struct sctp_chunk *,
+				      __u32 tsn);
+struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   const struct msghdr *);
+struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   const __u8 *,
+				   const size_t );
+struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
+				  const struct sctp_transport *,
+				  const void *payload,
+				  const size_t paylen);
+struct sctp_chunk *sctp_make_heartbeat_ack(const struct sctp_association *,
+				      const struct sctp_chunk *,
+				      const void *payload,
+				      const size_t paylen);
+struct sctp_chunk *sctp_make_op_error(const struct sctp_association *,
+				 const struct sctp_chunk *chunk,
+				 __u16 cause_code,
+				 const void *payload,
+				 size_t paylen);
+
+struct sctp_chunk *sctp_make_asconf_update_ip(struct sctp_association *,
+					      union sctp_addr *,
+					      struct sockaddr *,
+					      int, __u16);
+struct sctp_chunk *sctp_make_asconf_set_prim(struct sctp_association *asoc,
+					     union sctp_addr *addr);
+struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc,
+				       struct sctp_chunk *asconf);
+int sctp_process_asconf_ack(struct sctp_association *asoc,
+			    struct sctp_chunk *asconf_ack);
+struct sctp_chunk *sctp_make_fwdtsn(const struct sctp_association *asoc,
+				    __u32 new_cum_tsn, size_t nstreams,
+				    struct sctp_fwdtsn_skip *skiplist);
+
+void sctp_chunk_assign_tsn(struct sctp_chunk *);
+void sctp_chunk_assign_ssn(struct sctp_chunk *);
+
+void sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands, __u16 error);
+
+/* Prototypes for statetable processing. */
+
+int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype,
+	       sctp_state_t state,
+               struct sctp_endpoint *,
+               struct sctp_association *asoc,
+               void *event_arg,
+               int gfp);
+
+/* 2nd level prototypes */
+void sctp_generate_t3_rtx_event(unsigned long peer);
+void sctp_generate_heartbeat_event(unsigned long peer);
+
+void sctp_ootb_pkt_free(struct sctp_packet *);
+
+struct sctp_association *sctp_unpack_cookie(const struct sctp_endpoint *,
+				       const struct sctp_association *,
+				       struct sctp_chunk *, int gfp, int *err,
+				       struct sctp_chunk **err_chk_p);
+int sctp_addip_addr_config(struct sctp_association *, sctp_param_t,
+			   struct sockaddr_storage*, int);
+
+/* 3rd level prototypes */
+__u32 sctp_generate_tag(const struct sctp_endpoint *);
+__u32 sctp_generate_tsn(const struct sctp_endpoint *);
+
+/* Extern declarations for major data structures.  */
+extern sctp_timer_event_t *sctp_timer_events[SCTP_NUM_TIMEOUT_TYPES];
+
+
+/* Get the size of a DATA chunk payload. */
+static inline __u16 sctp_data_size(struct sctp_chunk *chunk)
+{
+	__u16 size;
+
+	size = ntohs(chunk->chunk_hdr->length);
+	size -= sizeof(sctp_data_chunk_t);
+
+	return size;
+}
+
+/* Compare two TSNs */
+
+/* RFC 1982 - Serial Number Arithmetic
+ *
+ * 2. Comparison
+ *  Then, s1 is said to be equal to s2 if and only if i1 is equal to i2,
+ *  in all other cases, s1 is not equal to s2.
+ *
+ * s1 is said to be less than s2 if, and only if, s1 is not equal to s2,
+ * and
+ *
+ *      (i1 < i2 and i2 - i1 < 2^(SERIAL_BITS - 1)) or
+ *      (i1 > i2 and i1 - i2 > 2^(SERIAL_BITS - 1))
+ *
+ * s1 is said to be greater than s2 if, and only if, s1 is not equal to
+ * s2, and
+ *
+ *      (i1 < i2 and i2 - i1 > 2^(SERIAL_BITS - 1)) or
+ *      (i1 > i2 and i1 - i2 < 2^(SERIAL_BITS - 1))
+ */
+
+/*
+ * RFC 2960
+ *  1.6 Serial Number Arithmetic
+ *
+ * Comparisons and arithmetic on TSNs in this document SHOULD use Serial
+ * Number Arithmetic as defined in [RFC1982] where SERIAL_BITS = 32.
+ */
+
+enum {
+	TSN_SIGN_BIT = (1<<31)
+};
+
+static inline int TSN_lt(__u32 s, __u32 t)
+{
+	return (((s) - (t)) & TSN_SIGN_BIT);
+}
+
+static inline int TSN_lte(__u32 s, __u32 t)
+{
+	return (((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT));
+}
+
+/* Compare two SSNs */
+
+/*
+ * RFC 2960
+ *  1.6 Serial Number Arithmetic
+ *
+ * Comparisons and arithmetic on Stream Sequence Numbers in this document
+ * SHOULD use Serial Number Arithmetic as defined in [RFC1982] where
+ * SERIAL_BITS = 16.
+ */
+enum {
+	SSN_SIGN_BIT = (1<<15)
+};
+
+static inline int SSN_lt(__u16 s, __u16 t)
+{
+	return (((s) - (t)) & SSN_SIGN_BIT);
+}
+
+static inline int SSN_lte(__u16 s, __u16 t)
+{
+	return (((s) == (t)) || (((s) - (t)) & SSN_SIGN_BIT));
+}
+
+/*
+ * ADDIP 3.1.1
+ * The valid range of Serial Number is from 0 to 4294967295 (2**32 - 1). Serial
+ * Numbers wrap back to 0 after reaching 4294967295.
+ */
+enum {
+	ADDIP_SERIAL_SIGN_BIT = (1<<31)
+};
+
+static inline int ADDIP_SERIAL_gte(__u16 s, __u16 t)
+{
+	return (((s) == (t)) || (((t) - (s)) & ADDIP_SERIAL_SIGN_BIT));
+}
+
+
+/* Run sctp_add_cmd() generating a BUG() if there is a failure.  */
+static inline void sctp_add_cmd_sf(sctp_cmd_seq_t *seq, sctp_verb_t verb, sctp_arg_t obj)
+{
+	if (unlikely(!sctp_add_cmd(seq, verb, obj)))
+		BUG();
+}
+
+/* Check VTAG of the packet matches the sender's own tag. */
+static inline int
+sctp_vtag_verify(const struct sctp_chunk *chunk,
+		 const struct sctp_association *asoc)
+{
+	/* RFC 2960 Sec 8.5 When receiving an SCTP packet, the endpoint
+	 * MUST ensure that the value in the Verification Tag field of
+	 * the received SCTP packet matches its own Tag. If the received
+	 * Verification Tag value does not match the receiver's own
+	 * tag value, the receiver shall silently discard the packet...
+	 */
+        if (ntohl(chunk->sctp_hdr->vtag) == asoc->c.my_vtag)
+                return 1;
+
+	return 0;
+}
+
+/* Check VTAG of the packet matches the sender's own tag OR its peer's
+ * tag and the T bit is set in the Chunk Flags.
+ */
+static inline int
+sctp_vtag_verify_either(const struct sctp_chunk *chunk,
+			const struct sctp_association *asoc)
+{
+        /* RFC 2960 Section 8.5.1, sctpimpguide-06 Section 2.13.2
+	 *
+	 * B) The receiver of a ABORT shall accept the packet if the
+	 * Verification Tag field of the packet matches its own tag OR it
+	 * is set to its peer's tag and the T bit is set in the Chunk
+	 * Flags. Otherwise, the receiver MUST silently discard the packet
+	 * and take no further action.
+	 *
+	 * (C) The receiver of a SHUTDOWN COMPLETE shall accept the
+	 * packet if the Verification Tag field of the packet
+	 * matches its own tag OR it is set to its peer's tag and
+	 * the T bit is set in the Chunk Flags.  Otherwise, the
+	 * receiver MUST silently discard the packet and take no
+	 * further action....
+	 *
+	 */
+        if ((ntohl(chunk->sctp_hdr->vtag) == asoc->c.my_vtag) ||
+	    (sctp_test_T_bit(chunk) && (ntohl(chunk->sctp_hdr->vtag)
+	    == asoc->c.peer_vtag))) {
+                return 1;
+	}
+
+	return 0;
+}
+
+#endif /* __sctp_sm_h__ */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
new file mode 100644
index 000000000000..7e64cf6bda1e
--- /dev/null
+++ b/include/net/sctp/structs.h
@@ -0,0 +1,1752 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *		   ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    Randall Stewart	    <randall@sctp.chicago.il.us>
+ *    Ken Morneau	    <kmorneau@cisco.com>
+ *    Qiaobing Xie	    <qxie1@email.mot.com>
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson	    <karl@athena.chicago.il.us>
+ *    Jon Grimm		    <jgrimm@us.ibm.com>
+ *    Xingang Guo	    <xingang.guo@intel.com>
+ *    Hui Huang		    <hui.huang@nokia.com>
+ *    Sridhar Samudrala	    <sri@us.ibm.com>
+ *    Daisy Chang	    <daisyc@us.ibm.com>
+ *    Dajiang Zhang	    <dajiang.zhang@nokia.com>
+ *    Ardelle Fan	    <ardelle.fan@intel.com>
+ *    Ryan Layer	    <rmlayer@us.ibm.com>
+ *    Anup Pemmaiah	    <pemmaiah@cc.usu.edu>
+ *    Kevin Gao             <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_structs_h__
+#define __sctp_structs_h__
+
+#include <linux/time.h>		/* We get struct timespec.    */
+#include <linux/socket.h>	/* linux/in.h needs this!!    */
+#include <linux/in.h>		/* We get struct sockaddr_in. */
+#include <linux/in6.h>		/* We get struct in6_addr     */
+#include <linux/ipv6.h>
+#include <asm/param.h>		/* We get MAXHOSTNAMELEN.     */
+#include <asm/atomic.h>		/* This gets us atomic counters.  */
+#include <linux/skbuff.h>	/* We need sk_buff_head. */
+#include <linux/workqueue.h>	/* We need tq_struct.	 */
+#include <linux/sctp.h>		/* We need sctp* header structs.  */
+
+/* A convenience structure for handling sockaddr structures.
+ * We should wean ourselves off this.
+ */
+union sctp_addr {
+	struct sockaddr_in v4;
+	struct sockaddr_in6 v6;
+	struct sockaddr sa;
+};
+
+/* Forward declarations for data structures. */
+struct sctp_globals;
+struct sctp_endpoint;
+struct sctp_association;
+struct sctp_transport;
+struct sctp_packet;
+struct sctp_chunk;
+struct sctp_inq;
+struct sctp_outq;
+struct sctp_bind_addr;
+struct sctp_ulpq;
+struct sctp_ep_common;
+struct sctp_ssnmap;
+
+
+#include <net/sctp/tsnmap.h>
+#include <net/sctp/ulpevent.h>
+#include <net/sctp/ulpqueue.h>
+
+/* Structures useful for managing bind/connect. */
+
+struct sctp_bind_bucket {
+	unsigned short	port;
+	unsigned short	fastreuse;
+	struct sctp_bind_bucket *next;
+	struct sctp_bind_bucket **pprev;
+	struct hlist_head	owner;
+};
+
+struct sctp_bind_hashbucket {
+	spinlock_t	lock;
+	struct sctp_bind_bucket	*chain;
+};
+
+/* Used for hashing all associations.  */
+struct sctp_hashbucket {
+	rwlock_t	lock;
+	struct sctp_ep_common  *chain;
+} __attribute__((__aligned__(8)));
+
+
+/* The SCTP globals structure. */
+extern struct sctp_globals {
+	/* RFC2960 Section 14. Suggested SCTP Protocol Parameter Values
+	 *
+	 * The following protocol parameters are RECOMMENDED:
+	 *
+	 * RTO.Initial		    - 3	 seconds
+	 * RTO.Min		    - 1	 second
+	 * RTO.Max		   -  60 seconds
+	 * RTO.Alpha		    - 1/8  (3 when converted to right shifts.)
+	 * RTO.Beta		    - 1/4  (2 when converted to right shifts.)
+	 */
+	__u32 rto_initial;
+	__u32 rto_min;
+	__u32 rto_max;
+
+	/* Note: rto_alpha and rto_beta are really defined as inverse
+	 * powers of two to facilitate integer operations.
+	 */
+	int rto_alpha;
+	int rto_beta;
+
+	/* Max.Burst		    - 4 */
+	int max_burst;
+
+	/* Valid.Cookie.Life	    - 60  seconds  */
+	int valid_cookie_life;
+
+	/* Whether Cookie Preservative is enabled(1) or not(0) */
+	int cookie_preserve_enable;
+
+	/* Association.Max.Retrans  - 10 attempts
+	 * Path.Max.Retrans	    - 5	 attempts (per destination address)
+	 * Max.Init.Retransmits	    - 8	 attempts
+	 */
+	int max_retrans_association;
+	int max_retrans_path;
+	int max_retrans_init;
+
+	/* HB.interval		    - 30 seconds  */
+	int hb_interval;
+
+	/* The following variables are implementation specific.	 */
+
+	/* Default initialization values to be applied to new associations. */
+	__u16 max_instreams;
+	__u16 max_outstreams;
+
+	/* This is a list of groups of functions for each address
+	 * family that we support.
+	 */
+	struct list_head address_families;
+
+	/* This is the hash of all endpoints. */
+	int ep_hashsize;
+	struct sctp_hashbucket *ep_hashtable;
+
+	/* This is the hash of all associations. */
+	int assoc_hashsize;
+	struct sctp_hashbucket *assoc_hashtable;
+
+	/* This is the sctp port control hash.	*/
+	int port_hashsize;
+	int port_rover;
+	spinlock_t port_alloc_lock;  /* Protects port_rover. */
+	struct sctp_bind_hashbucket *port_hashtable;
+
+	/* This is the global local address list.
+	 * We actively maintain this complete list of interfaces on
+	 * the system by catching routing events.
+	 *
+	 * It is a list of sctp_sockaddr_entry.
+	 */
+	struct list_head local_addr_list;
+	spinlock_t local_addr_lock;
+	
+	/* Flag to indicate if addip is enabled. */
+	int addip_enable;
+
+	/* Flag to indicate if PR-SCTP is enabled. */
+	int prsctp_enable;
+} sctp_globals;
+
+#define sctp_rto_initial		(sctp_globals.rto_initial)
+#define sctp_rto_min			(sctp_globals.rto_min)
+#define sctp_rto_max			(sctp_globals.rto_max)
+#define sctp_rto_alpha			(sctp_globals.rto_alpha)
+#define sctp_rto_beta			(sctp_globals.rto_beta)
+#define sctp_max_burst			(sctp_globals.max_burst)
+#define sctp_valid_cookie_life		(sctp_globals.valid_cookie_life)
+#define sctp_cookie_preserve_enable	(sctp_globals.cookie_preserve_enable)
+#define sctp_max_retrans_association	(sctp_globals.max_retrans_association)
+#define sctp_max_retrans_path		(sctp_globals.max_retrans_path)
+#define sctp_max_retrans_init		(sctp_globals.max_retrans_init)
+#define sctp_hb_interval		(sctp_globals.hb_interval)
+#define sctp_max_instreams		(sctp_globals.max_instreams)
+#define sctp_max_outstreams		(sctp_globals.max_outstreams)
+#define sctp_address_families		(sctp_globals.address_families)
+#define sctp_ep_hashsize		(sctp_globals.ep_hashsize)
+#define sctp_ep_hashtable		(sctp_globals.ep_hashtable)
+#define sctp_assoc_hashsize		(sctp_globals.assoc_hashsize)
+#define sctp_assoc_hashtable		(sctp_globals.assoc_hashtable)
+#define sctp_port_hashsize		(sctp_globals.port_hashsize)
+#define sctp_port_rover			(sctp_globals.port_rover)
+#define sctp_port_alloc_lock		(sctp_globals.port_alloc_lock)
+#define sctp_port_hashtable		(sctp_globals.port_hashtable)
+#define sctp_local_addr_list		(sctp_globals.local_addr_list)
+#define sctp_local_addr_lock		(sctp_globals.local_addr_lock)
+#define sctp_addip_enable		(sctp_globals.addip_enable)
+#define sctp_prsctp_enable		(sctp_globals.prsctp_enable)
+
+/* SCTP Socket type: UDP or TCP style. */
+typedef enum {
+	SCTP_SOCKET_UDP = 0,
+	SCTP_SOCKET_UDP_HIGH_BANDWIDTH,
+	SCTP_SOCKET_TCP
+} sctp_socket_type_t;
+
+/* Per socket SCTP information. */
+struct sctp_sock {
+	/* inet_sock has to be the first member of sctp_sock */
+	struct inet_sock inet;
+	/* What kind of a socket is this? */
+	sctp_socket_type_t type;
+
+	/* PF_ family specific functions.  */
+	struct sctp_pf *pf;
+
+	/* Access to HMAC transform. */
+	struct crypto_tfm *hmac;
+
+	/* What is our base endpointer? */
+	struct sctp_endpoint *ep;
+
+	struct sctp_bind_bucket *bind_hash;
+	/* Various Socket Options.  */
+	__u16 default_stream;
+	__u32 default_ppid;
+	__u16 default_flags;
+	__u32 default_context;
+	__u32 default_timetolive;
+
+	struct sctp_initmsg initmsg;
+	struct sctp_rtoinfo rtoinfo;
+	struct sctp_paddrparams paddrparam;
+	struct sctp_event_subscribe subscribe;
+	struct sctp_assocparams assocparams;
+	int user_frag;
+	__u32 autoclose;
+	__u8 nodelay;
+	__u8 disable_fragments;
+	__u8 pd_mode;
+	__u8 v4mapped;
+	__u32 adaption_ind;
+
+	/* Receive to here while partial delivery is in effect. */
+	struct sk_buff_head pd_lobby;
+};
+
+static inline struct sctp_sock *sctp_sk(const struct sock *sk)
+{
+       return (struct sctp_sock *)sk;
+}
+
+static inline struct sock *sctp_opt2sk(const struct sctp_sock *sp)
+{
+       return (struct sock *)sp;
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+struct sctp6_sock {
+       struct sctp_sock  sctp;
+       struct ipv6_pinfo inet6;
+};
+#endif /* CONFIG_IPV6 */
+
+
+/* This is our APPLICATION-SPECIFIC state cookie.
+ * THIS IS NOT DICTATED BY THE SPECIFICATION.
+ */
+/* These are the parts of an association which we send in the cookie.
+ * Most of these are straight out of:
+ * RFC2960 12.2 Parameters necessary per association (i.e. the TCB)
+ *
+ */
+
+struct sctp_cookie {
+
+	/* My	       : Tag expected in every inbound packet and sent
+	 * Verification: in the INIT or INIT ACK chunk.
+	 * Tag	       :
+	 */
+	__u32 my_vtag;
+
+	/* Peer's      : Tag expected in every outbound packet except
+	 * Verification: in the INIT chunk.
+	 * Tag	       :
+	 */
+	__u32 peer_vtag;
+
+	/* The rest of these are not from the spec, but really need to
+	 * be in the cookie.
+	 */
+
+	/* My Tie Tag  : Assist in discovering a restarting association. */
+	__u32 my_ttag;
+
+	/* Peer's Tie Tag: Assist in discovering a restarting association. */
+	__u32 peer_ttag;
+
+	/* When does this cookie expire? */
+	struct timeval expiration;
+
+	/* Number of inbound/outbound streams which are set
+	 * and negotiated during the INIT process.
+	 */
+	__u16 sinit_num_ostreams;
+	__u16 sinit_max_instreams;
+
+	/* This is the first sequence number I used.  */
+	__u32 initial_tsn;
+
+	/* This holds the originating address of the INIT packet.  */
+	union sctp_addr peer_addr;
+
+	/* IG Section 2.35.3 
+	 * Include the source port of the INIT-ACK
+	 */
+	__u16		my_port;
+
+	__u8 prsctp_capable;
+
+	/* Padding for future use */
+	__u8 padding;  		
+
+	__u32 adaption_ind;	
+
+
+	/* This is a shim for my peer's INIT packet, followed by
+	 * a copy of the raw address list of the association.
+	 * The length of the raw address list is saved in the
+	 * raw_addr_list_len field, which will be used at the time when
+	 * the association TCB is re-constructed from the cookie.
+	 */
+	__u32 raw_addr_list_len;
+	struct sctp_init_chunk peer_init[0];
+};
+
+
+/* The format of our cookie that we send to our peer. */
+struct sctp_signed_cookie {
+	__u8 signature[SCTP_SECRET_SIZE];
+	struct sctp_cookie c;
+};
+
+/* This is another convenience type to allocate memory for address
+ * params for the maximum size and pass such structures around
+ * internally.
+ */
+union sctp_addr_param {
+	struct sctp_ipv4addr_param v4;
+	struct sctp_ipv6addr_param v6;
+};
+
+/* A convenience type to allow walking through the various
+ * parameters and avoid casting all over the place.
+ */
+union sctp_params {
+	void *v;
+	struct sctp_paramhdr *p;
+	struct sctp_cookie_preserve_param *life;
+	struct sctp_hostname_param *dns;
+	struct sctp_cookie_param *cookie;
+	struct sctp_supported_addrs_param *sat;
+	struct sctp_ipv4addr_param *v4;
+	struct sctp_ipv6addr_param *v6;
+	union sctp_addr_param *addr;
+	struct sctp_adaption_ind_param *aind;
+};
+
+/* RFC 2960.  Section 3.3.5 Heartbeat.
+ *    Heartbeat Information: variable length
+ *    The Sender-specific Heartbeat Info field should normally include
+ *    information about the sender's current time when this HEARTBEAT
+ *    chunk is sent and the destination transport address to which this
+ *    HEARTBEAT is sent (see Section 8.3).
+ */
+typedef struct sctp_sender_hb_info {
+	struct sctp_paramhdr param_hdr;
+	union sctp_addr daddr;
+	unsigned long sent_at;
+} __attribute__((packed)) sctp_sender_hb_info_t;
+
+/*
+ *  RFC 2960 1.3.2 Sequenced Delivery within Streams
+ *
+ *  The term "stream" is used in SCTP to refer to a sequence of user
+ *  messages that are to be delivered to the upper-layer protocol in
+ *  order with respect to other messages within the same stream.  This is
+ *  in contrast to its usage in TCP, where it refers to a sequence of
+ *  bytes (in this document a byte is assumed to be eight bits).
+ *  ...
+ *
+ *  This is the structure we use to track both our outbound and inbound
+ *  SSN, or Stream Sequence Numbers.
+ */
+
+struct sctp_stream {
+	__u16 *ssn;
+	unsigned int len;
+};
+
+struct sctp_ssnmap {
+	struct sctp_stream in;
+	struct sctp_stream out;
+	int malloced;
+};
+
+struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out, int gfp);
+void sctp_ssnmap_free(struct sctp_ssnmap *map);
+void sctp_ssnmap_clear(struct sctp_ssnmap *map);
+
+/* What is the current SSN number for this stream? */
+static inline __u16 sctp_ssn_peek(struct sctp_stream *stream, __u16 id)
+{
+	return stream->ssn[id];
+}
+
+/* Return the next SSN number for this stream.	*/
+static inline __u16 sctp_ssn_next(struct sctp_stream *stream, __u16 id)
+{
+	return stream->ssn[id]++;
+}
+
+/* Skip over this ssn and all below. */
+static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id, 
+				 __u16 ssn)
+{
+	stream->ssn[id] = ssn+1;
+}
+              
+/*
+ * Pointers to address related SCTP functions.
+ * (i.e. things that depend on the address family.)
+ */
+struct sctp_af {
+	int		(*sctp_xmit)	(struct sk_buff *skb,
+					 struct sctp_transport *,
+					 int ipfragok);
+	int		(*setsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 int optlen);
+	int		(*getsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 int __user *optlen);
+	struct dst_entry *(*get_dst)	(struct sctp_association *asoc,
+					 union sctp_addr *daddr,
+					 union sctp_addr *saddr);
+	void		(*get_saddr)	(struct sctp_association *asoc,
+					 struct dst_entry *dst,
+					 union sctp_addr *daddr,
+					 union sctp_addr *saddr);
+	void		(*copy_addrlist) (struct list_head *,
+					  struct net_device *);
+	void		(*dst_saddr)	(union sctp_addr *saddr,
+					 struct dst_entry *dst,
+					 unsigned short port);
+	int		(*cmp_addr)	(const union sctp_addr *addr1,
+					 const union sctp_addr *addr2);
+	void		(*addr_copy)	(union sctp_addr *dst,
+					 union sctp_addr *src);
+	void		(*from_skb)	(union sctp_addr *,
+					 struct sk_buff *skb,
+					 int saddr);
+	void		(*from_sk)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*to_sk_saddr)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*to_sk_daddr)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*from_addr_param) (union sctp_addr *,
+					    union sctp_addr_param *,
+					    __u16 port, int iif);	
+	int		(*to_addr_param) (const union sctp_addr *,
+					  union sctp_addr_param *); 
+	int		(*addr_valid)	(union sctp_addr *,
+					 struct sctp_sock *);
+	sctp_scope_t	(*scope) (union sctp_addr *);
+	void		(*inaddr_any)	(union sctp_addr *, unsigned short);
+	int		(*is_any)	(const union sctp_addr *);
+	int		(*available)	(union sctp_addr *,
+					 struct sctp_sock *);
+	int		(*skb_iif)	(const struct sk_buff *sk);
+	int		(*is_ce)	(const struct sk_buff *sk);
+	void		(*seq_dump_addr)(struct seq_file *seq,
+					 union sctp_addr *addr);
+	__u16		net_header_len;
+	int		sockaddr_len;
+	sa_family_t	sa_family;
+	struct list_head list;
+};
+
+struct sctp_af *sctp_get_af_specific(sa_family_t);
+int sctp_register_af(struct sctp_af *);
+
+/* Protocol family functions. */
+struct sctp_pf {
+	void (*event_msgname)(struct sctp_ulpevent *, char *, int *);
+	void (*skb_msgname)  (struct sk_buff *, char *, int *);
+	int  (*af_supported) (sa_family_t, struct sctp_sock *);
+	int  (*cmp_addr) (const union sctp_addr *,
+			  const union sctp_addr *,
+			  struct sctp_sock *);
+	int  (*bind_verify) (struct sctp_sock *, union sctp_addr *);
+	int  (*send_verify) (struct sctp_sock *, union sctp_addr *);
+	int  (*supported_addrs)(const struct sctp_sock *, __u16 *);
+	struct sock *(*create_accept_sk) (struct sock *sk,
+					  struct sctp_association *asoc);
+	void (*addr_v4map) (struct sctp_sock *, union sctp_addr *);
+	struct sctp_af *af;
+};
+
+
+/* Structure to track chunk fragments that have been acked, but peer
+ * fragments of the same message have not.
+ */
+struct sctp_datamsg {
+	/* Chunks waiting to be submitted to lower layer. */
+	struct list_head chunks;
+	/* Chunks that have been transmitted. */
+	struct list_head track;
+	/* Reference counting. */
+	atomic_t refcnt;
+	/* When is this message no longer interesting to the peer? */
+	unsigned long expires_at;
+	/* Did the messenge fail to send? */
+	int send_error;
+	char send_failed;
+	/* Control whether chunks from this message can be abandoned. */
+	char can_abandon;
+};
+
+struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *,
+					    struct sctp_sndrcvinfo *,
+					    struct msghdr *, int len);
+void sctp_datamsg_put(struct sctp_datamsg *);
+void sctp_datamsg_free(struct sctp_datamsg *);
+void sctp_datamsg_track(struct sctp_chunk *);
+void sctp_chunk_fail(struct sctp_chunk *, int error);
+int sctp_chunk_abandoned(struct sctp_chunk *);
+
+
+/* RFC2960 1.4 Key Terms
+ *
+ * o Chunk: A unit of information within an SCTP packet, consisting of
+ * a chunk header and chunk-specific content.
+ *
+ * As a matter of convenience, we remember the SCTP common header for
+ * each chunk as well as a few other header pointers...
+ */
+struct sctp_chunk {
+	/* These first three elements MUST PRECISELY match the first
+	 * three elements of struct sk_buff.  This allows us to reuse
+	 * all the skb_* queue management functions.
+	 */
+	struct sctp_chunk *next;
+	struct sctp_chunk *prev;
+	struct sk_buff_head *list;
+	atomic_t refcnt;
+
+	/* This is our link to the per-transport transmitted list.  */
+	struct list_head transmitted_list;
+
+	/* This field is used by chunks that hold fragmented data.
+	 * For the first fragment this is the list that holds the rest of
+	 * fragments. For the remaining fragments, this is the link to the
+	 * frag_list maintained in the first fragment.
+	 */
+	struct list_head frag_list;
+
+	/* This points to the sk_buff containing the actual data.  */
+	struct sk_buff *skb;
+
+	/* These are the SCTP headers by reverse order in a packet.
+	 * Note that some of these may happen more than once.  In that
+	 * case, we point at the "current" one, whatever that means
+	 * for that level of header.
+	 */
+
+	/* We point this at the FIRST TLV parameter to chunk_hdr.  */
+	union sctp_params param_hdr;
+	union {
+		__u8 *v;
+		struct sctp_datahdr *data_hdr;
+		struct sctp_inithdr *init_hdr;
+		struct sctp_sackhdr *sack_hdr;
+		struct sctp_heartbeathdr *hb_hdr;
+		struct sctp_sender_hb_info *hbs_hdr;
+		struct sctp_shutdownhdr *shutdown_hdr;
+		struct sctp_signed_cookie *cookie_hdr;
+		struct sctp_ecnehdr *ecne_hdr;
+		struct sctp_cwrhdr *ecn_cwr_hdr;
+		struct sctp_errhdr *err_hdr;
+		struct sctp_addiphdr *addip_hdr;
+		struct sctp_fwdtsn_hdr *fwdtsn_hdr;
+	} subh;
+
+	__u8 *chunk_end;
+
+	struct sctp_chunkhdr *chunk_hdr;
+	struct sctphdr *sctp_hdr;
+
+	/* This needs to be recoverable for SCTP_SEND_FAILED events. */
+	struct sctp_sndrcvinfo sinfo;
+
+	/* Which association does this belong to?  */
+	struct sctp_association *asoc;
+
+	/* What endpoint received this chunk? */
+	struct sctp_ep_common *rcvr;
+
+	/* We fill this in if we are calculating RTT. */
+	unsigned long sent_at;
+
+	/* What is the origin IP address for this chunk?  */
+	union sctp_addr source;
+	/* Destination address for this chunk. */
+	union sctp_addr dest;
+
+	/* For outbound message, track all fragments for SEND_FAILED. */
+	struct sctp_datamsg *msg;
+
+	/* For an inbound chunk, this tells us where it came from.
+	 * For an outbound chunk, it tells us where we'd like it to
+	 * go.	It is NULL if we have no preference.
+	 */
+	struct sctp_transport *transport;
+
+	__u8 rtt_in_progress;	/* Is this chunk used for RTT calculation? */
+	__u8 resent;		/* Has this chunk ever been retransmitted. */
+	__u8 has_tsn;		/* Does this chunk have a TSN yet? */
+	__u8 has_ssn;		/* Does this chunk have a SSN yet? */
+	__u8 singleton;		/* Was this the only chunk in the packet? */
+	__u8 end_of_packet;	/* Was this the last chunk in the packet? */
+	__u8 ecn_ce_done;	/* Have we processed the ECN CE bit? */
+	__u8 pdiscard;		/* Discard the whole packet now? */
+	__u8 tsn_gap_acked;	/* Is this chunk acked by a GAP ACK? */
+	__u8 fast_retransmit;	 /* Is this chunk fast retransmitted? */
+	__u8 tsn_missing_report; /* Data chunk missing counter. */
+};
+
+void sctp_chunk_hold(struct sctp_chunk *);
+void sctp_chunk_put(struct sctp_chunk *);
+int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len,
+			  struct iovec *data);
+void sctp_chunk_free(struct sctp_chunk *);
+void  *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
+struct sctp_chunk *sctp_chunkify(struct sk_buff *,
+				 const struct sctp_association *,
+				 struct sock *);
+void sctp_init_addrs(struct sctp_chunk *, union sctp_addr *,
+		     union sctp_addr *);
+const union sctp_addr *sctp_source(const struct sctp_chunk *chunk);
+
+/* This is a structure for holding either an IPv6 or an IPv4 address.  */
+/* sin_family -- AF_INET or AF_INET6
+ * sin_port -- ordinary port number
+ * sin_addr -- cast to either (struct in_addr) or (struct in6_addr)
+ */
+struct sctp_sockaddr_entry {
+	struct list_head list;
+	union sctp_addr a;
+};
+
+typedef struct sctp_chunk *(sctp_packet_phandler_t)(struct sctp_association *);
+
+/* This structure holds lists of chunks as we are assembling for
+ * transmission.
+ */
+struct sctp_packet {
+	/* These are the SCTP header values (host order) for the packet. */
+	__u16 source_port;
+	__u16 destination_port;
+	__u32 vtag;
+
+	/* This contains the payload chunks.  */
+	struct sk_buff_head chunks;
+
+	/* This is the overhead of the sctp and ip headers. */
+	size_t overhead;
+	/* This is the total size of all chunks INCLUDING padding.  */
+	size_t size;
+
+	/* The packet is destined for this transport address.
+	 * The function we finally use to pass down to the next lower
+	 * layer lives in the transport structure.
+	 */
+	struct sctp_transport *transport;
+
+	/* This packet contains a COOKIE-ECHO chunk. */
+	char has_cookie_echo;
+
+	/* This packet containsa SACK chunk. */
+	char has_sack;
+
+	/* SCTP cannot fragment this packet. So let ip fragment it. */
+	char ipfragok;
+
+	int malloced;
+};
+
+struct sctp_packet *sctp_packet_init(struct sctp_packet *,
+				     struct sctp_transport *,
+				     __u16 sport, __u16 dport);
+struct sctp_packet *sctp_packet_config(struct sctp_packet *, __u32 vtag, int);
+sctp_xmit_t sctp_packet_transmit_chunk(struct sctp_packet *,
+                                       struct sctp_chunk *);
+sctp_xmit_t sctp_packet_append_chunk(struct sctp_packet *,
+                                     struct sctp_chunk *);
+int sctp_packet_transmit(struct sctp_packet *);
+void sctp_packet_free(struct sctp_packet *);
+
+static inline int sctp_packet_empty(struct sctp_packet *packet)
+{
+	return (packet->size == packet->overhead);
+}
+
+/* This represents a remote transport address.
+ * For local transport addresses, we just use union sctp_addr.
+ *
+ * RFC2960 Section 1.4 Key Terms
+ *
+ *   o	Transport address:  A Transport Address is traditionally defined
+ *	by Network Layer address, Transport Layer protocol and Transport
+ *	Layer port number.  In the case of SCTP running over IP, a
+ *	transport address is defined by the combination of an IP address
+ *	and an SCTP port number (where SCTP is the Transport protocol).
+ *
+ * RFC2960 Section 7.1 SCTP Differences from TCP Congestion control
+ *
+ *   o	The sender keeps a separate congestion control parameter set for
+ *	each of the destination addresses it can send to (not each
+ *	source-destination pair but for each destination).  The parameters
+ *	should decay if the address is not used for a long enough time
+ *	period.
+ *
+ */
+struct sctp_transport {
+	/* A list of transports. */
+	struct list_head transports;
+
+	/* Reference counting. */
+	atomic_t refcnt;
+	int	 dead;
+
+	/* This is the peer's IP address and port. */
+	union sctp_addr ipaddr;
+
+	/* These are the functions we call to handle LLP stuff.	 */
+	struct sctp_af *af_specific;
+
+	/* Which association do we belong to?  */
+	struct sctp_association *asoc;
+
+	/* RFC2960
+	 *
+	 * 12.3 Per Transport Address Data
+	 *
+	 * For each destination transport address in the peer's
+	 * address list derived from the INIT or INIT ACK chunk, a
+	 * number of data elements needs to be maintained including:
+	 */
+	__u32 rtt;		/* This is the most recent RTT.	 */
+
+	/* RTO	       : The current retransmission timeout value.  */
+	__u32 rto;
+
+	/* RTTVAR      : The current RTT variation.  */
+	__u32 rttvar;
+
+	/* SRTT	       : The current smoothed round trip time.	*/
+	__u32 srtt;
+
+	/* RTO-Pending : A flag used to track if one of the DATA
+	 *		chunks sent to this address is currently being
+	 *		used to compute a RTT. If this flag is 0,
+	 *		the next DATA chunk sent to this destination
+	 *		should be used to compute a RTT and this flag
+	 *		should be set. Every time the RTT
+	 *		calculation completes (i.e. the DATA chunk
+	 *		is SACK'd) clear this flag.
+	 */
+	int rto_pending;
+
+	/*
+	 * These are the congestion stats.
+	 */
+	/* cwnd	       : The current congestion window.	 */
+	__u32 cwnd;		  /* This is the actual cwnd.  */
+
+	/* ssthresh    : The current slow start threshold value.  */
+	__u32 ssthresh;
+
+	/* partial     : The tracking method for increase of cwnd when in
+	 * bytes acked : congestion avoidance mode (see Section 6.2.2)
+	 */
+	__u32 partial_bytes_acked;
+
+	/* Data that has been sent, but not acknowledged. */
+	__u32 flight_size;
+
+	/* PMTU	      : The current known path MTU.  */
+	__u32 pmtu;
+
+	/* Destination */
+	struct dst_entry *dst;
+	/* Source address. */
+	union sctp_addr saddr;
+
+	/* When was the last time(in jiffies) that a data packet was sent on
+	 * this transport?  This is used to adjust the cwnd when the transport
+	 * becomes inactive.
+	 */
+	unsigned long last_time_used;
+
+	/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
+	 * the destination address every heartbeat interval.
+	 */
+	int hb_interval;
+
+	/* When was the last time (in jiffies) that we heard from this
+	 * transport?  We use this to pick new active and retran paths.
+	 */
+	unsigned long last_time_heard;
+
+	/* Last time(in jiffies) when cwnd is reduced due to the congestion
+	 * indication based on ECNE chunk.
+	 */
+	unsigned long last_time_ecne_reduced;
+
+	/* active      : The current active state of this destination,
+	 *	       :  i.e. DOWN, UP, etc.
+	 */
+	int active;
+
+	/* hb_allowed  : The current heartbeat state of this destination,
+	 *	       :  i.e. ALLOW-HB, NO-HEARTBEAT, etc.
+	 */
+	int hb_allowed;
+
+	/* These are the error stats for this destination.  */
+
+	/* Error count : The current error count for this destination.	*/
+	unsigned short error_count;
+
+	/* This is the max_retrans value for the transport and will
+	 * be initialized to proto.max_retrans.path.  This can be changed
+	 * using SCTP_SET_PEER_ADDR_PARAMS socket option.
+	 */
+	int max_retrans;
+
+	/* Per	       : A timer used by each destination.
+	 * Destination :
+	 * Timer       :
+	 *
+	 * [Everywhere else in the text this is called T3-rtx. -ed]
+	 */
+	struct timer_list T3_rtx_timer;
+
+	/* Heartbeat timer is per destination. */
+	struct timer_list hb_timer;
+
+	/* Since we're using per-destination retransmission timers
+	 * (see above), we're also using per-destination "transmitted"
+	 * queues.  This probably ought to be a private struct
+	 * accessible only within the outqueue, but it's not, yet.
+	 */
+	struct list_head transmitted;
+
+	/* We build bundle-able packets for this transport here.  */
+	struct sctp_packet packet;
+
+	/* This is the list of transports that have chunks to send.  */
+	struct list_head send_ready;
+
+	int malloced; /* Is this structure kfree()able? */
+
+	/* State information saved for SFR_CACC algorithm. The key
+	 * idea in SFR_CACC is to maintain state at the sender on a
+	 * per-destination basis when a changeover happens.
+	 *	char changeover_active;
+	 *	char cycling_changeover;
+	 *	__u32 next_tsn_at_change;
+	 *	char cacc_saw_newack;
+	 */
+	struct {
+		/* An unsigned integer, which stores the next TSN to be
+		 * used by the sender, at the moment of changeover.
+		 */
+		__u32 next_tsn_at_change;
+
+		/* A flag which indicates the occurrence of a changeover */
+		char changeover_active;
+
+		/* A flag which indicates whether the change of primary is
+		 * the first switch to this destination address during an
+		 * active switch.
+		 */
+		char cycling_changeover;
+
+		/* A temporary flag, which is used during the processing of
+		 * a SACK to estimate the causative TSN(s)'s group.
+		 */
+		char cacc_saw_newack;
+	} cacc;
+};
+
+struct sctp_transport *sctp_transport_new(const union sctp_addr *, int);
+void sctp_transport_set_owner(struct sctp_transport *,
+			      struct sctp_association *);
+void sctp_transport_route(struct sctp_transport *, union sctp_addr *,
+			  struct sctp_sock *);
+void sctp_transport_pmtu(struct sctp_transport *);
+void sctp_transport_free(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_hold(struct sctp_transport *);
+void sctp_transport_put(struct sctp_transport *);
+void sctp_transport_update_rto(struct sctp_transport *, __u32);
+void sctp_transport_raise_cwnd(struct sctp_transport *, __u32, __u32);
+void sctp_transport_lower_cwnd(struct sctp_transport *, sctp_lower_cwnd_t);
+unsigned long sctp_transport_timeout(struct sctp_transport *);
+
+
+/* This is the structure we use to queue packets as they come into
+ * SCTP.  We write packets to it and read chunks from it.
+ */
+struct sctp_inq {
+	/* This is actually a queue of sctp_chunk each
+	 * containing a partially decoded packet.
+	 */
+	struct sk_buff_head in;
+	/* This is the packet which is currently off the in queue and is
+	 * being worked on through the inbound chunk processing.
+	 */
+	struct sctp_chunk *in_progress;
+
+	/* This is the delayed task to finish delivering inbound
+	 * messages.
+	 */
+	struct work_struct immediate;
+
+	int malloced;	     /* Is this structure kfree()able?	*/
+};
+
+void sctp_inq_init(struct sctp_inq *);
+void sctp_inq_free(struct sctp_inq *);
+void sctp_inq_push(struct sctp_inq *, struct sctp_chunk *packet);
+struct sctp_chunk *sctp_inq_pop(struct sctp_inq *);
+void sctp_inq_set_th_handler(struct sctp_inq *, void (*)(void *), void *);
+
+/* This is the structure we use to hold outbound chunks.  You push
+ * chunks in and they automatically pop out the other end as bundled
+ * packets (it calls (*output_handler)()).
+ *
+ * This structure covers sections 6.3, 6.4, 6.7, 6.8, 6.10, 7., 8.1,
+ * and 8.2 of the v13 draft.
+ *
+ * It handles retransmissions.	The connection to the timeout portion
+ * of the state machine is through sctp_..._timeout() and timeout_handler.
+ *
+ * If you feed it SACKs, it will eat them.
+ *
+ * If you give it big chunks, it will fragment them.
+ *
+ * It assigns TSN's to data chunks.  This happens at the last possible
+ * instant before transmission.
+ *
+ * When free()'d, it empties itself out via output_handler().
+ */
+struct sctp_outq {
+	struct sctp_association *asoc;
+
+	/* Data pending that has never been transmitted.  */
+	struct sk_buff_head out;
+
+	unsigned out_qlen;	/* Total length of queued data chunks. */
+
+	/* Error of send failed, may used in SCTP_SEND_FAILED event. */
+	unsigned error;
+
+	/* These are control chunks we want to send.  */
+	struct sk_buff_head control;
+
+	/* These are chunks that have been sacked but are above the
+	 * CTSN, or cumulative tsn ack point.
+	 */
+	struct list_head sacked;
+
+	/* Put chunks on this list to schedule them for
+	 * retransmission.
+	 */
+	struct list_head retransmit;
+
+	/* Put chunks on this list to save them for FWD TSN processing as
+	 * they were abandoned.
+	 */
+	struct list_head abandoned;
+
+	/* How many unackd bytes do we have in-flight?	*/
+	__u32 outstanding_bytes;
+
+	/* Corked? */
+	char cork;
+
+	/* Is this structure empty?  */
+	char empty;
+
+	/* Are we kfree()able? */
+	char malloced;
+};
+
+void sctp_outq_init(struct sctp_association *, struct sctp_outq *);
+void sctp_outq_teardown(struct sctp_outq *);
+void sctp_outq_free(struct sctp_outq*);
+int sctp_outq_tail(struct sctp_outq *, struct sctp_chunk *chunk);
+int sctp_outq_flush(struct sctp_outq *, int);
+int sctp_outq_sack(struct sctp_outq *, struct sctp_sackhdr *);
+int sctp_outq_is_empty(const struct sctp_outq *);
+void sctp_outq_restart(struct sctp_outq *);
+
+void sctp_retransmit(struct sctp_outq *, struct sctp_transport *,
+		     sctp_retransmit_reason_t);
+void sctp_retransmit_mark(struct sctp_outq *, struct sctp_transport *, __u8);
+int sctp_outq_uncork(struct sctp_outq *);
+/* Uncork and flush an outqueue.  */
+static inline void sctp_outq_cork(struct sctp_outq *q)
+{
+	q->cork = 1;
+}
+
+/* These bind address data fields common between endpoints and associations */
+struct sctp_bind_addr {
+
+	/* RFC 2960 12.1 Parameters necessary for the SCTP instance
+	 *
+	 * SCTP Port:	The local SCTP port number the endpoint is
+	 *		bound to.
+	 */
+	__u16 port;
+
+	/* RFC 2960 12.1 Parameters necessary for the SCTP instance
+	 *
+	 * Address List: The list of IP addresses that this instance
+	 *	has bound.  This information is passed to one's
+	 *	peer(s) in INIT and INIT ACK chunks.
+	 */
+	struct list_head address_list;
+
+	int malloced;	     /* Are we kfree()able?  */
+};
+
+void sctp_bind_addr_init(struct sctp_bind_addr *, __u16 port);
+void sctp_bind_addr_free(struct sctp_bind_addr *);
+int sctp_bind_addr_copy(struct sctp_bind_addr *dest,
+			const struct sctp_bind_addr *src,
+			sctp_scope_t scope, int gfp,int flags);
+int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
+		       int gfp);
+int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
+int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *,
+			 struct sctp_sock *);
+union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
+					const union sctp_addr	*addrs,
+					int			addrcnt,
+					struct sctp_sock	*opt);
+union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp,
+					 int *addrs_len, int gfp);
+int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw, int len,
+			   __u16 port, int gfp);
+
+sctp_scope_t sctp_scope(const union sctp_addr *);
+int sctp_in_scope(const union sctp_addr *addr, const sctp_scope_t scope);
+int sctp_is_any(const union sctp_addr *addr);
+int sctp_addr_is_valid(const union sctp_addr *addr);
+
+
+/* What type of endpoint?  */
+typedef enum {
+	SCTP_EP_TYPE_SOCKET,
+	SCTP_EP_TYPE_ASSOCIATION,
+} sctp_endpoint_type_t;
+
+/*
+ * A common base class to bridge the implmentation view of a
+ * socket (usually listening) endpoint versus an association's
+ * local endpoint.
+ * This common structure is useful for several purposes:
+ *   1) Common interface for lookup routines.
+ *	a) Subfunctions work for either endpoint or association
+ *	b) Single interface to lookup allows hiding the lookup lock rather
+ *	   than acquiring it externally.
+ *   2) Common interface for the inbound chunk handling/state machine.
+ *   3) Common object handling routines for reference counting, etc.
+ *   4) Disentangle association lookup from endpoint lookup, where we
+ *	do not have to find our endpoint to find our association.
+ *
+ */
+
+struct sctp_ep_common {
+	/* Fields to help us manage our entries in the hash tables. */
+	struct sctp_ep_common *next;
+	struct sctp_ep_common **pprev;
+	int hashent;
+
+	/* Runtime type information.  What kind of endpoint is this? */
+	sctp_endpoint_type_t type;
+
+	/* Some fields to help us manage this object.
+	 *   refcnt   - Reference count access to this object.
+	 *   dead     - Do not attempt to use this object.
+	 *   malloced - Do we need to kfree this object?
+	 */
+	atomic_t    refcnt;
+	char	    dead;
+	char	    malloced;
+
+	/* What socket does this endpoint belong to?  */
+	struct sock *sk;
+
+	/* This is where we receive inbound chunks.  */
+	struct sctp_inq	  inqueue;
+
+	/* This substructure includes the defining parameters of the
+	 * endpoint:
+	 * bind_addr.port is our shared port number.
+	 * bind_addr.address_list is our set of local IP addresses.
+	 */
+	struct sctp_bind_addr bind_addr;
+
+	/* Protection during address list comparisons. */
+	rwlock_t   addr_lock;
+};
+
+
+/* RFC Section 1.4 Key Terms
+ *
+ * o SCTP endpoint: The logical sender/receiver of SCTP packets. On a
+ *   multi-homed host, an SCTP endpoint is represented to its peers as a
+ *   combination of a set of eligible destination transport addresses to
+ *   which SCTP packets can be sent and a set of eligible source
+ *   transport addresses from which SCTP packets can be received.
+ *   All transport addresses used by an SCTP endpoint must use the
+ *   same port number, but can use multiple IP addresses. A transport
+ *   address used by an SCTP endpoint must not be used by another
+ *   SCTP endpoint. In other words, a transport address is unique
+ *   to an SCTP endpoint.
+ *
+ * From an implementation perspective, each socket has one of these.
+ * A TCP-style socket will have exactly one association on one of
+ * these.  An UDP-style socket will have multiple associations hanging
+ * off one of these.
+ */
+
+struct sctp_endpoint {
+	/* Common substructure for endpoint and association. */
+	struct sctp_ep_common base;
+
+	/* Associations: A list of current associations and mappings
+	 *	      to the data consumers for each association. This
+	 *	      may be in the form of a hash table or other
+	 *	      implementation dependent structure. The data
+	 *	      consumers may be process identification
+	 *	      information such as file descriptors, named pipe
+	 *	      pointer, or table pointers dependent on how SCTP
+	 *	      is implemented.
+	 */
+	/* This is really a list of struct sctp_association entries. */
+	struct list_head asocs;
+
+	/* Secret Key: A secret key used by this endpoint to compute
+	 *	      the MAC.	This SHOULD be a cryptographic quality
+	 *	      random number with a sufficient length.
+	 *	      Discussion in [RFC1750] can be helpful in
+	 *	      selection of the key.
+	 */
+	__u8 secret_key[SCTP_HOW_MANY_SECRETS][SCTP_SECRET_SIZE];
+	int current_key;
+	int last_key;
+	int key_changed_at;
+
+	/* Default timeouts.  */
+	int timeouts[SCTP_NUM_TIMEOUT_TYPES];
+
+	/* Various thresholds.	*/
+
+	/* Name for debugging output... */
+	char *debug_name;
+};
+
+/* Recover the outter endpoint structure. */
+static inline struct sctp_endpoint *sctp_ep(struct sctp_ep_common *base)
+{
+	struct sctp_endpoint *ep;
+
+	ep = container_of(base, struct sctp_endpoint, base);
+	return ep;
+}
+
+/* These are function signatures for manipulating endpoints.  */
+struct sctp_endpoint *sctp_endpoint_new(struct sock *, int);
+void sctp_endpoint_free(struct sctp_endpoint *);
+void sctp_endpoint_put(struct sctp_endpoint *);
+void sctp_endpoint_hold(struct sctp_endpoint *);
+void sctp_endpoint_add_asoc(struct sctp_endpoint *, struct sctp_association *);
+struct sctp_association *sctp_endpoint_lookup_assoc(
+	const struct sctp_endpoint *ep,
+	const union sctp_addr *paddr,
+	struct sctp_transport **);
+int sctp_endpoint_is_peeled_off(struct sctp_endpoint *,
+				const union sctp_addr *);
+struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *,
+					const union sctp_addr *);
+int sctp_has_association(const union sctp_addr *laddr,
+			 const union sctp_addr *paddr);
+
+int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t,
+		     sctp_init_chunk_t *peer_init, struct sctp_chunk *chunk,
+		     struct sctp_chunk **err_chunk);
+int sctp_process_init(struct sctp_association *, sctp_cid_t cid,
+		      const union sctp_addr *peer,
+		      sctp_init_chunk_t *init, int gfp);
+__u32 sctp_generate_tag(const struct sctp_endpoint *);
+__u32 sctp_generate_tsn(const struct sctp_endpoint *);
+
+
+/* RFC2960
+ *
+ * 12. Recommended Transmission Control Block (TCB) Parameters
+ *
+ * This section details a recommended set of parameters that should
+ * be contained within the TCB for an implementation. This section is
+ * for illustrative purposes and should not be deemed as requirements
+ * on an implementation or as an exhaustive list of all parameters
+ * inside an SCTP TCB. Each implementation may need its own additional
+ * parameters for optimization.
+ */
+
+
+/* Here we have information about each individual association. */
+struct sctp_association {
+
+	/* A base structure common to endpoint and association.
+	 * In this context, it represents the associations's view
+	 * of the local endpoint of the association.
+	 */
+	struct sctp_ep_common base;
+
+	/* Associations on the same socket. */
+	struct list_head asocs;
+
+	/* association id. */
+	sctp_assoc_t assoc_id;
+
+	/* This is our parent endpoint.	 */
+	struct sctp_endpoint *ep;
+
+	/* These are those association elements needed in the cookie.  */
+	struct sctp_cookie c;
+
+	/* This is all information about our peer.  */
+	struct {
+		/* rwnd
+		 *
+		 * Peer Rwnd   : Current calculated value of the peer's rwnd.
+		 */
+		__u32 rwnd;
+
+		/* transport_addr_list
+		 *
+		 * Peer	       : A list of SCTP transport addresses that the
+		 * Transport   : peer is bound to. This information is derived
+		 * Address     : from the INIT or INIT ACK and is used to
+		 * List	       : associate an inbound packet with a given
+		 *	       : association. Normally this information is
+		 *	       : hashed or keyed for quick lookup and access
+		 *	       : of the TCB.
+		 *
+		 * It is a list of SCTP_transport's.
+		 */
+		struct list_head transport_addr_list;
+
+		/* port
+		 *   The transport layer port number.
+		 */
+		__u16 port;
+
+		/* primary_path
+		 *
+		 * Primary     : This is the current primary destination
+		 * Path	       : transport address of the peer endpoint.  It
+		 *	       : may also specify a source transport address
+		 *	       : on this endpoint.
+		 *
+		 * All of these paths live on transport_addr_list.
+		 *
+		 * At the bakeoffs, we discovered that the intent of
+		 * primaryPath is that it only changes when the ULP
+		 * asks to have it changed.  We add the activePath to
+		 * designate the connection we are currently using to
+		 * transmit new data and most control chunks.
+		 */
+		struct sctp_transport *primary_path;
+
+		/* Cache the primary path address here, when we
+		 * need a an address for msg_name.
+		 */
+		union sctp_addr primary_addr;
+
+		/* active_path
+		 *   The path that we are currently using to
+		 *   transmit new data and most control chunks.
+		 */
+		struct sctp_transport *active_path;
+
+		/* retran_path
+		 *
+		 * RFC2960 6.4 Multi-homed SCTP Endpoints
+		 * ...
+		 * Furthermore, when its peer is multi-homed, an
+		 * endpoint SHOULD try to retransmit a chunk to an
+		 * active destination transport address that is
+		 * different from the last destination address to
+		 * which the DATA chunk was sent.
+		 */
+		struct sctp_transport *retran_path;
+
+		/* Pointer to last transport I have sent on.  */
+		struct sctp_transport *last_sent_to;
+
+		/* This is the last transport I have received DATA on.	*/
+		struct sctp_transport *last_data_from;
+
+		/*
+		 * Mapping  An array of bits or bytes indicating which out of
+		 * Array    order TSN's have been received (relative to the
+		 *	    Last Rcvd TSN). If no gaps exist, i.e. no out of
+		 *	    order packets have been received, this array
+		 *	    will be set to all zero. This structure may be
+		 *	    in the form of a circular buffer or bit array.
+		 *
+		 * Last Rcvd   : This is the last TSN received in
+		 * TSN	       : sequence. This value is set initially by
+		 *	       : taking the peer's Initial TSN, received in
+		 *	       : the INIT or INIT ACK chunk, and subtracting
+		 *	       : one from it.
+		 *
+		 * Throughout most of the specification this is called the
+		 * "Cumulative TSN ACK Point".	In this case, we
+		 * ignore the advice in 12.2 in favour of the term
+		 * used in the bulk of the text.  This value is hidden
+		 * in tsn_map--we get it by calling sctp_tsnmap_get_ctsn().
+		 */
+		struct sctp_tsnmap tsn_map;
+		__u8 _map[sctp_tsnmap_storage_size(SCTP_TSN_MAP_SIZE)];
+
+		/* Ack State   : This flag indicates if the next received
+		 *             : packet is to be responded to with a
+		 *             : SACK. This is initializedto 0.  When a packet
+		 *             : is received it is incremented. If this value
+		 *             : reaches 2 or more, a SACK is sent and the
+		 *             : value is reset to 0. Note: This is used only
+		 *             : when no DATA chunks are received out of
+		 *             : order.  When DATA chunks are out of order,
+		 *             : SACK's are not delayed (see Section 6).
+		 */
+		__u8    sack_needed;     /* Do we need to sack the peer? */
+
+		/* These are capabilities which our peer advertised.  */
+		__u8	ecn_capable;	 /* Can peer do ECN? */
+		__u8	ipv4_address;	 /* Peer understands IPv4 addresses? */
+		__u8	ipv6_address;	 /* Peer understands IPv6 addresses? */
+		__u8	hostname_address;/* Peer understands DNS addresses? */
+		__u8    asconf_capable;  /* Does peer support ADDIP? */
+		__u8    prsctp_capable;  /* Can peer do PR-SCTP? */
+
+		__u32   adaption_ind;	 /* Adaption Code point. */
+
+		/* This mask is used to disable sending the ASCONF chunk
+		 * with specified parameter to peer.
+		 */
+		__u16 addip_disabled_mask;
+
+		struct sctp_inithdr i;
+		int cookie_len;
+		void *cookie;
+
+		/* ADDIP Section 4.2 Upon reception of an ASCONF Chunk.
+		 * C1) ... "Peer-Serial-Number'. This value MUST be initialized to the
+		 * Initial TSN Value minus 1
+		 */
+		__u32 addip_serial;
+	} peer;
+
+	/* State       : A state variable indicating what state the
+	 *	       : association is in, i.e. COOKIE-WAIT,
+	 *	       : COOKIE-ECHOED, ESTABLISHED, SHUTDOWN-PENDING,
+	 *	       : SHUTDOWN-SENT, SHUTDOWN-RECEIVED, SHUTDOWN-ACK-SENT.
+	 *
+	 *		Note: No "CLOSED" state is illustrated since if a
+	 *		association is "CLOSED" its TCB SHOULD be removed.
+	 *
+	 *		In this implementation we DO have a CLOSED
+	 *		state which is used during initiation and shutdown.
+	 *
+	 *		State takes values from SCTP_STATE_*.
+	 */
+	sctp_state_t state;
+
+	/* The cookie life I award for any cookie.  */
+	struct timeval cookie_life;
+
+	/* Overall     : The overall association error count.
+	 * Error Count : [Clear this any time I get something.]
+	 */
+	int overall_error_count;
+
+	/* These are the association's initial, max, and min RTO values.
+	 * These values will be initialized by system defaults, but can
+	 * be modified via the SCTP_RTOINFO socket option.
+	 */
+	__u32 rto_initial;
+	__u32 rto_max;
+	__u32 rto_min;
+
+	/* Maximum number of new data packets that can be sent in a burst.  */
+	int max_burst;
+
+	/* This is the max_retrans value for the association.  This value will
+	 * be initialized initialized from system defaults, but can be
+	 * modified by the SCTP_ASSOCINFO socket option.
+	 */
+	int max_retrans;
+
+	/* Maximum number of times the endpoint will retransmit INIT  */
+	__u16 max_init_attempts;
+
+	/* How many times have we resent an INIT? */
+	__u16 init_retries;
+
+	/* The largest timeout or RTO value to use in attempting an INIT */
+	__u16 max_init_timeo;
+
+	int timeouts[SCTP_NUM_TIMEOUT_TYPES];
+	struct timer_list timers[SCTP_NUM_TIMEOUT_TYPES];
+
+	/* Transport to which SHUTDOWN chunk was last sent.  */
+	struct sctp_transport *shutdown_last_sent_to;
+
+	/* Next TSN    : The next TSN number to be assigned to a new
+	 *	       : DATA chunk.  This is sent in the INIT or INIT
+	 *	       : ACK chunk to the peer and incremented each
+	 *	       : time a DATA chunk is assigned a TSN
+	 *	       : (normally just prior to transmit or during
+	 *	       : fragmentation).
+	 */
+	__u32 next_tsn;
+
+	/*
+	 * Last Rcvd   : This is the last TSN received in sequence.  This value
+	 * TSN	       : is set initially by taking the peer's Initial TSN,
+	 *	       : received in the INIT or INIT ACK chunk, and
+	 *	       : subtracting one from it.
+	 *
+	 * Most of RFC 2960 refers to this as the Cumulative TSN Ack Point.
+	 */
+
+	__u32 ctsn_ack_point;
+
+	/* PR-SCTP Advanced.Peer.Ack.Point */
+	__u32 adv_peer_ack_point;
+
+	/* Highest TSN that is acknowledged by incoming SACKs. */
+	__u32 highest_sacked;
+
+	/* The number of unacknowledged data chunks.  Reported through
+	 * the SCTP_STATUS sockopt.
+	 */
+	__u16 unack_data;
+
+	/* This is the association's receive buffer space.  This value is used
+	 * to set a_rwnd field in an INIT or a SACK chunk.
+	 */
+	__u32 rwnd;
+
+	/* This is the last advertised value of rwnd over a SACK chunk. */
+	__u32 a_rwnd;
+
+	/* Number of bytes by which the rwnd has slopped.  The rwnd is allowed
+	 * to slop over a maximum of the association's frag_point.
+	 */
+	__u32 rwnd_over;
+
+	/* This is the sndbuf size in use for the association.
+	 * This corresponds to the sndbuf size for the association,
+	 * as specified in the sk->sndbuf.
+	 */
+	int sndbuf_used;
+
+	/* This is the wait queue head for send requests waiting on
+	 * the association sndbuf space.
+	 */
+	wait_queue_head_t	wait;
+
+	/* Association : The smallest PMTU discovered for all of the
+	 * PMTU	       : peer's transport addresses.
+	 */
+	__u32 pmtu;
+
+	/* The message size at which SCTP fragmentation will occur. */
+	__u32 frag_point;
+
+	/* Currently only one counter is used to count INIT errors. */
+	int counters[SCTP_NUMBER_COUNTERS];
+
+	/* Default send parameters. */
+	__u16 default_stream;
+	__u16 default_flags;
+	__u32 default_ppid;
+	__u32 default_context;
+	__u32 default_timetolive;
+
+	/* This tracks outbound ssn for a given stream.	 */
+	struct sctp_ssnmap *ssnmap;
+
+	/* All outbound chunks go through this structure.  */
+	struct sctp_outq outqueue;
+
+	/* A smart pipe that will handle reordering and fragmentation,
+	 * as well as handle passing events up to the ULP.
+	 */
+	struct sctp_ulpq ulpq;
+
+	/* Last TSN that caused an ECNE Chunk to be sent.  */
+	__u32 last_ecne_tsn;
+
+	/* Last TSN that caused a CWR Chunk to be sent.	 */
+	__u32 last_cwr_tsn;
+
+	/* How many duplicated TSNs have we seen?  */
+	int numduptsns;
+
+	/* Number of seconds of idle time before an association is closed.  */
+	__u32 autoclose;
+
+	/* These are to support
+	 * "SCTP Extensions for Dynamic Reconfiguration of IP Addresses
+	 *  and Enforcement of Flow and Message Limits"
+	 * <draft-ietf-tsvwg-addip-sctp-02.txt>
+	 * or "ADDIP" for short.
+	 */
+
+
+
+	/* ADDIP Section 4.1.1 Congestion Control of ASCONF Chunks
+	 *
+	 * R1) One and only one ASCONF Chunk MAY be in transit and
+	 * unacknowledged at any one time.  If a sender, after sending
+	 * an ASCONF chunk, decides it needs to transfer another
+	 * ASCONF Chunk, it MUST wait until the ASCONF-ACK Chunk
+	 * returns from the previous ASCONF Chunk before sending a
+	 * subsequent ASCONF. Note this restriction binds each side,
+	 * so at any time two ASCONF may be in-transit on any given
+	 * association (one sent from each endpoint).
+	 *
+	 * [This is our one-and-only-one ASCONF in flight.  If we do
+	 * not have an ASCONF in flight, this is NULL.]
+	 */
+	struct sctp_chunk *addip_last_asconf;
+
+	/* ADDIP Section 4.2 Upon reception of an ASCONF Chunk.
+	 *
+	 * IMPLEMENTATION NOTE: As an optimization a receiver may wish
+	 * to save the last ASCONF-ACK for some predetermined period
+	 * of time and instead of re-processing the ASCONF (with the
+	 * same serial number) it may just re-transmit the
+	 * ASCONF-ACK. It may wish to use the arrival of a new serial
+	 * number to discard the previously saved ASCONF-ACK or any
+	 * other means it may choose to expire the saved ASCONF-ACK.
+	 *
+	 * [This is our saved ASCONF-ACK.  We invalidate it when a new
+	 * ASCONF serial number arrives.]
+	 */
+	struct sctp_chunk *addip_last_asconf_ack;
+
+	/* These ASCONF chunks are waiting to be sent.
+	 *
+	 * These chunaks can't be pushed to outqueue until receiving
+	 * ASCONF_ACK for the previous ASCONF indicated by
+	 * addip_last_asconf, so as to guarantee that only one ASCONF
+	 * is in flight at any time.
+	 *
+	 * ADDIP Section 4.1.1 Congestion Control of ASCONF Chunks
+	 *
+	 * In defining the ASCONF Chunk transfer procedures, it is
+	 * essential that these transfers MUST NOT cause congestion
+	 * within the network.	To achieve this, we place these
+	 * restrictions on the transfer of ASCONF Chunks:
+	 *
+	 * R1) One and only one ASCONF Chunk MAY be in transit and
+	 * unacknowledged at any one time.  If a sender, after sending
+	 * an ASCONF chunk, decides it needs to transfer another
+	 * ASCONF Chunk, it MUST wait until the ASCONF-ACK Chunk
+	 * returns from the previous ASCONF Chunk before sending a
+	 * subsequent ASCONF. Note this restriction binds each side,
+	 * so at any time two ASCONF may be in-transit on any given
+	 * association (one sent from each endpoint).
+	 *
+	 *
+	 * [I really think this is EXACTLY the sort of intelligence
+	 *  which already resides in sctp_outq.	 Please move this
+	 *  queue and its supporting logic down there.	--piggy]
+	 */
+	struct sk_buff_head addip_chunks;
+
+	/* ADDIP Section 4.1 ASCONF Chunk Procedures
+	 *
+	 * A2) A serial number should be assigned to the Chunk. The
+	 * serial number SHOULD be a monotonically increasing
+	 * number. The serial number SHOULD be initialized at
+	 * the start of the association to the same value as the
+	 * Initial TSN and every time a new ASCONF chunk is created
+	 * it is incremented by one after assigning the serial number
+	 * to the newly created chunk.
+	 *
+	 * ADDIP
+	 * 3.1.1  Address/Stream Configuration Change Chunk (ASCONF)
+	 *
+	 * Serial Number : 32 bits (unsigned integer)
+	 *
+	 * This value represents a Serial Number for the ASCONF
+	 * Chunk. The valid range of Serial Number is from 0 to
+	 * 4294967295 (2^32 - 1).  Serial Numbers wrap back to 0
+	 * after reaching 4294967295.
+	 */
+	__u32 addip_serial;
+
+	/* Need to send an ECNE Chunk? */
+	char need_ecne;
+
+	/* Is it a temporary association? */
+	char temp;
+};
+
+
+/* An eyecatcher for determining if we are really looking at an
+ * association data structure.
+ */
+enum {
+	SCTP_ASSOC_EYECATCHER = 0xa550c123,
+};
+
+/* Recover the outter association structure. */
+static inline struct sctp_association *sctp_assoc(struct sctp_ep_common *base)
+{
+	struct sctp_association *asoc;
+
+	asoc = container_of(base, struct sctp_association, base);
+	return asoc;
+}
+
+/* These are function signatures for manipulating associations.	 */
+
+
+struct sctp_association *
+sctp_association_new(const struct sctp_endpoint *, const struct sock *,
+		     sctp_scope_t scope, int gfp);
+void sctp_association_free(struct sctp_association *);
+void sctp_association_put(struct sctp_association *);
+void sctp_association_hold(struct sctp_association *);
+
+struct sctp_transport *sctp_assoc_choose_shutdown_transport(
+	struct sctp_association *);
+void sctp_assoc_update_retran_path(struct sctp_association *);
+struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *,
+					  const union sctp_addr *);
+int sctp_assoc_lookup_laddr(struct sctp_association *asoc,
+			    const union sctp_addr *laddr);
+struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *,
+				     const union sctp_addr *address,
+				     const int gfp);
+void sctp_assoc_del_peer(struct sctp_association *asoc,
+			 const union sctp_addr *addr);
+void sctp_assoc_control_transport(struct sctp_association *,
+				  struct sctp_transport *,
+				  sctp_transport_cmd_t, sctp_sn_error_t);
+struct sctp_transport *sctp_assoc_lookup_tsn(struct sctp_association *, __u32);
+struct sctp_transport *sctp_assoc_is_match(struct sctp_association *,
+					   const union sctp_addr *,
+					   const union sctp_addr *);
+void sctp_assoc_migrate(struct sctp_association *, struct sock *);
+void sctp_assoc_update(struct sctp_association *old,
+		       struct sctp_association *new);
+
+__u32 sctp_association_get_next_tsn(struct sctp_association *);
+
+void sctp_assoc_sync_pmtu(struct sctp_association *);
+void sctp_assoc_rwnd_increase(struct sctp_association *, unsigned);
+void sctp_assoc_rwnd_decrease(struct sctp_association *, unsigned);
+void sctp_assoc_set_primary(struct sctp_association *,
+			    struct sctp_transport *);
+int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, int);
+int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *,
+					 struct sctp_cookie*, int gfp);
+
+int sctp_cmp_addr_exact(const union sctp_addr *ss1,
+			const union sctp_addr *ss2);
+struct sctp_chunk *sctp_get_ecne_prepend(struct sctp_association *asoc);
+
+/* A convenience structure to parse out SCTP specific CMSGs. */
+typedef struct sctp_cmsgs {
+	struct sctp_initmsg *init;
+	struct sctp_sndrcvinfo *info;
+} sctp_cmsgs_t;
+
+/* Structure for tracking memory objects */
+typedef struct {
+	char *label;
+	atomic_t *counter;
+} sctp_dbg_objcnt_entry_t;
+
+#endif /* __sctp_structs_h__ */
diff --git a/include/net/sctp/tsnmap.h b/include/net/sctp/tsnmap.h
new file mode 100644
index 000000000000..021947da70ea
--- /dev/null
+++ b/include/net/sctp/tsnmap.h
@@ -0,0 +1,207 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * These are the definitions needed for the tsnmap type.  The tsnmap is used
+ * to track out of order TSNs received.
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+#include <net/sctp/constants.h>
+
+#ifndef __sctp_tsnmap_h__
+#define __sctp_tsnmap_h__
+
+/* RFC 2960 12.2 Parameters necessary per association (i.e. the TCB)
+ * Mapping  An array of bits or bytes indicating which out of
+ * Array    order TSN's have been received (relative to the
+ *          Last Rcvd TSN). If no gaps exist, i.e. no out of
+ *          order packets have been received, this array
+ *          will be set to all zero. This structure may be
+ *          in the form of a circular buffer or bit array.
+ */
+struct sctp_tsnmap {
+	/* This array counts the number of chunks with each TSN.
+	 * It points at one of the two buffers with which we will
+	 * ping-pong between.
+	 */
+	__u8 *tsn_map;
+
+	/* This marks the tsn which overflows the tsn_map, when the
+	 * cumulative ack point reaches this point we know we can switch
+	 * maps (tsn_map and overflow_map swap).
+	 */
+	__u32 overflow_tsn;
+
+	/* This is the overflow array for tsn_map.
+	 * It points at one of the other ping-pong buffers.
+	 */
+	__u8 *overflow_map;
+
+	/* This is the TSN at tsn_map[0].  */
+	__u32 base_tsn;
+
+	/* Last Rcvd   : This is the last TSN received in
+	 * TSN	       : sequence. This value is set initially by
+	 *             : taking the peer's Initial TSN, received in
+	 *             : the INIT or INIT ACK chunk, and subtracting
+	 *             : one from it.
+	 *
+	 * Throughout most of the specification this is called the
+	 * "Cumulative TSN ACK Point".  In this case, we
+	 * ignore the advice in 12.2 in favour of the term
+	 * used in the bulk of the text.
+	 */
+	__u32 cumulative_tsn_ack_point;
+
+	/* This is the minimum number of TSNs we can track.  This corresponds
+	 * to the size of tsn_map.   Note: the overflow_map allows us to
+	 * potentially track more than this quantity.
+	 */
+	__u16 len;
+
+	/* This is the highest TSN we've marked.  */
+	__u32 max_tsn_seen;
+
+	/* Data chunks pending receipt. used by SCTP_STATUS sockopt */
+	__u16 pending_data;
+
+	/* Record duplicate TSNs here.  We clear this after
+	 * every SACK.  Store up to SCTP_MAX_DUP_TSNS worth of
+	 * information.
+	 */
+	__u32 dup_tsns[SCTP_MAX_DUP_TSNS];
+	__u16 num_dup_tsns;
+
+	/* Record gap ack block information here.  */
+	struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+
+	int malloced;
+
+	__u8 raw_map[0];
+};
+
+struct sctp_tsnmap_iter {
+	__u32 start;
+};
+
+/* This macro assists in creation of external storage for variable length
+ * internal buffers.  We double allocate so the overflow map works.
+ */
+#define sctp_tsnmap_storage_size(count) (sizeof(__u8) * (count) * 2)
+
+/* Initialize a block of memory as a tsnmap.  */
+struct sctp_tsnmap *sctp_tsnmap_init(struct sctp_tsnmap *, __u16 len,
+				     __u32 initial_tsn);
+
+/* Test the tracking state of this TSN.
+ * Returns:
+ *   0 if the TSN has not yet been seen
+ *  >0 if the TSN has been seen (duplicate)
+ *  <0 if the TSN is invalid (too large to track)
+ */
+int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
+
+/* Mark this TSN as seen.  */
+void sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+
+/* Mark this TSN and all lower as seen. */
+void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
+
+/* Retrieve the Cumulative TSN ACK Point.  */
+static inline __u32 sctp_tsnmap_get_ctsn(const struct sctp_tsnmap *map)
+{
+	return map->cumulative_tsn_ack_point;
+}
+
+/* Retrieve the highest TSN we've seen.  */
+static inline __u32 sctp_tsnmap_get_max_tsn_seen(const struct sctp_tsnmap *map)
+{
+	return map->max_tsn_seen;
+}
+
+/* How many duplicate TSNs are stored? */
+static inline __u16 sctp_tsnmap_num_dups(struct sctp_tsnmap *map)
+{
+	return map->num_dup_tsns;
+}
+
+/* Return pointer to duplicate tsn array as needed by SACK. */
+static inline __u32 *sctp_tsnmap_get_dups(struct sctp_tsnmap *map)
+{
+	map->num_dup_tsns = 0;
+	return map->dup_tsns;
+}
+
+/* How many gap ack blocks do we have recorded? */
+__u16 sctp_tsnmap_num_gabs(struct sctp_tsnmap *map);
+
+/* Refresh the count on pending data. */
+__u16 sctp_tsnmap_pending(struct sctp_tsnmap *map);
+
+/* Return pointer to gap ack blocks as needed by SACK. */
+static inline struct sctp_gap_ack_block *sctp_tsnmap_get_gabs(struct sctp_tsnmap *map)
+{
+	return map->gabs;
+}
+
+/* Is there a gap in the TSN map?  */
+static inline int sctp_tsnmap_has_gap(const struct sctp_tsnmap *map)
+{
+	int has_gap;
+
+	has_gap = (map->cumulative_tsn_ack_point != map->max_tsn_seen);
+	return has_gap;
+}
+
+/* Mark a duplicate TSN.  Note:  limit the storage of duplicate TSN
+ * information.
+ */
+static inline void sctp_tsnmap_mark_dup(struct sctp_tsnmap *map, __u32 tsn)
+{
+	if (map->num_dup_tsns < SCTP_MAX_DUP_TSNS)
+		map->dup_tsns[map->num_dup_tsns++] = htonl(tsn);
+}
+
+/* Renege a TSN that was seen.  */
+void sctp_tsnmap_renege(struct sctp_tsnmap *, __u32 tsn);
+
+/* Is there a gap in the TSN map? */
+int sctp_tsnmap_has_gap(const struct sctp_tsnmap *);
+
+#endif /* __sctp_tsnmap_h__ */
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
new file mode 100644
index 000000000000..1019d83a580a
--- /dev/null
+++ b/include/net/sctp/ulpevent.h
@@ -0,0 +1,162 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * These are the definitions needed for the sctp_ulpevent type.  The
+ * sctp_ulpevent type is used to carry information from the state machine
+ * upwards to the ULP.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_ulpevent_h__
+#define __sctp_ulpevent_h__
+
+/* A structure to carry information to the ULP (e.g. Sockets API) */
+/* Warning: This sits inside an skb.cb[] area.  Be very careful of
+ * growing this structure as it is at the maximum limit now.
+ */
+struct sctp_ulpevent {
+	struct sctp_association *asoc;
+	__u16 stream;
+	__u16 ssn;
+	__u16 flags;
+	__u32 ppid;
+	__u32 tsn;
+	__u32 cumtsn;
+	int msg_flags;
+	int iif;
+};
+
+/* Retrieve the skb this event sits inside of. */
+static inline struct sk_buff *sctp_event2skb(struct sctp_ulpevent *ev)
+{
+	return container_of((void *)ev, struct sk_buff, cb);
+}
+
+/* Retrieve & cast the event sitting inside the skb. */
+static inline struct sctp_ulpevent *sctp_skb2event(struct sk_buff *skb)
+{
+	return (struct sctp_ulpevent *)skb->cb;
+}
+
+void sctp_ulpevent_free(struct sctp_ulpevent *);
+int sctp_ulpevent_is_notification(const struct sctp_ulpevent *);
+void sctp_queue_purge_ulpevents(struct sk_buff_head *list);
+
+struct sctp_ulpevent *sctp_ulpevent_make_assoc_change(
+	const struct sctp_association *asoc,
+	__u16 flags,
+	__u16 state,
+	__u16 error,
+	__u16 outbound,
+	__u16 inbound,
+	int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change(
+	const struct sctp_association *asoc,
+	const struct sockaddr_storage *aaddr,
+	int flags,
+	int state,
+	int error,
+	int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_remote_error(
+	const struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	__u16 flags,
+	int gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_send_failed(
+	const struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	__u16 flags,
+	__u32 error,
+	int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event(
+	const struct sctp_association *asoc,
+	__u16 flags,
+	int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_pdapi(
+	const struct sctp_association *asoc,
+	__u32 indication, int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication(
+	const struct sctp_association *asoc, int gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	int gfp);
+
+void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
+	struct msghdr *);
+__u16 sctp_ulpevent_get_notification_type(const struct sctp_ulpevent *event);
+
+/* Is this event type enabled? */
+static inline int sctp_ulpevent_type_enabled(__u16 sn_type,
+					     struct sctp_event_subscribe *mask)
+{
+	char *amask = (char *) mask;
+	return amask[sn_type - SCTP_SN_TYPE_BASE];
+}
+
+/* Given an event subscription, is this event enabled? */
+static inline int sctp_ulpevent_is_enabled(const struct sctp_ulpevent *event,
+					   struct sctp_event_subscribe *mask)
+{
+	__u16 sn_type;
+	int enabled = 1;
+
+	if (sctp_ulpevent_is_notification(event)) {
+		sn_type = sctp_ulpevent_get_notification_type(event);
+		enabled = sctp_ulpevent_type_enabled(sn_type, mask);
+	}
+	return enabled;
+}
+
+#endif /* __sctp_ulpevent_h__ */
+
+
+
+
+
+
+
diff --git a/include/net/sctp/ulpqueue.h b/include/net/sctp/ulpqueue.h
new file mode 100644
index 000000000000..961736d29d21
--- /dev/null
+++ b/include/net/sctp/ulpqueue.h
@@ -0,0 +1,92 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * These are the definitions needed for the sctp_ulpq type.  The
+ * sctp_ulpq is the interface between the Upper Layer Protocol, or ULP,
+ * and the core SCTP state machine.  This is the component which handles
+ * reassembly and ordering.
+ *
+ * The SCTP reference implementation  is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * the SCTP reference implementation  is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_ulpqueue_h__
+#define __sctp_ulpqueue_h__
+
+/* A structure to carry information to the ULP (e.g. Sockets API) */
+struct sctp_ulpq {
+	char malloced;
+	char pd_mode;
+	struct sctp_association *asoc;
+	struct sk_buff_head reasm;
+	struct sk_buff_head lobby;
+};
+
+/* Prototypes. */
+struct sctp_ulpq *sctp_ulpq_init(struct sctp_ulpq *,
+				 struct sctp_association *);
+void sctp_ulpq_free(struct sctp_ulpq *);
+
+/* Add a new DATA chunk for processing. */
+int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *, int);
+
+/* Add a new event for propagation to the ULP. */
+int sctp_ulpq_tail_event(struct sctp_ulpq *, struct sctp_ulpevent *ev);
+
+/* Renege previously received chunks.  */
+void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *, int);
+
+/* Perform partial delivery. */
+void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *, int);
+
+/* Abort the partial delivery. */
+void sctp_ulpq_abort_pd(struct sctp_ulpq *, int);
+
+/* Clear the partial data delivery condition on this socket. */
+int sctp_clear_pd(struct sock *sk);
+
+/* Skip over an SSN. */
+void sctp_ulpq_skip(struct sctp_ulpq *ulpq, __u16 sid, __u16 ssn);
+
+#endif /* __sctp_ulpqueue_h__ */
+
+
+
+
+
+
+
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
new file mode 100644
index 000000000000..2758e8ce4f25
--- /dev/null
+++ b/include/net/sctp/user.h
@@ -0,0 +1,589 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2002 Intel Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * This header represents the structures and constants needed to support
+ * the SCTP Extension to the Sockets API.
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll    <piggy@acm.org>
+ *    R. Stewart               <randall@sctp.chicago.il.us>
+ *    K. Morneau               <kmorneau@cisco.com>
+ *    Q. Xie                   <qxie1@email.mot.com>
+ *    Karl Knutson             <karl@athena.chicago.il.us>
+ *    Jon Grimm                <jgrimm@us.ibm.com>
+ *    Daisy Chang              <daisyc@us.ibm.com>
+ *    Ryan Layer               <rmlayer@us.ibm.com>
+ *    Ardelle Fan	       <ardelle.fan@intel.com>
+ *    Sridhar Samudrala        <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __net_sctp_user_h__
+#define __net_sctp_user_h__
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+typedef __s32 sctp_assoc_t;
+
+/* The following symbols come from the Sockets API Extensions for
+ * SCTP <draft-ietf-tsvwg-sctpsocket-07.txt>.
+ */
+enum sctp_optname {
+	SCTP_RTOINFO,
+#define SCTP_RTOINFO SCTP_RTOINFO
+	SCTP_ASSOCINFO,
+#define SCTP_ASSOCINFO SCTP_ASSOCINFO
+	SCTP_INITMSG,
+#define SCTP_INITMSG SCTP_INITMSG
+	SCTP_NODELAY, 	/* Get/set nodelay option. */
+#define SCTP_NODELAY	SCTP_NODELAY
+	SCTP_AUTOCLOSE,
+#define SCTP_AUTOCLOSE SCTP_AUTOCLOSE
+	SCTP_SET_PEER_PRIMARY_ADDR, 
+#define SCTP_SET_PEER_PRIMARY_ADDR SCTP_SET_PEER_PRIMARY_ADDR
+	SCTP_PRIMARY_ADDR,
+#define SCTP_PRIMARY_ADDR SCTP_PRIMARY_ADDR
+	SCTP_ADAPTION_LAYER,      
+#define SCTP_ADAPTION_LAYER SCTP_ADAPTION_LAYER
+	SCTP_DISABLE_FRAGMENTS,
+#define SCTP_DISABLE_FRAGMENTS SCTP_DISABLE_FRAGMENTS
+	SCTP_PEER_ADDR_PARAMS,
+#define SCTP_PEER_ADDR_PARAMS SCTP_PEER_ADDR_PARAMS
+	SCTP_DEFAULT_SEND_PARAM,
+#define SCTP_DEFAULT_SEND_PARAM SCTP_DEFAULT_SEND_PARAM
+	SCTP_EVENTS,
+#define SCTP_EVENTS SCTP_EVENTS
+	SCTP_I_WANT_MAPPED_V4_ADDR,  /* Turn on/off mapped v4 addresses  */
+#define SCTP_I_WANT_MAPPED_V4_ADDR SCTP_I_WANT_MAPPED_V4_ADDR
+	SCTP_MAXSEG, 	/* Get/set maximum fragment. */
+#define SCTP_MAXSEG 	SCTP_MAXSEG
+	SCTP_STATUS,
+#define SCTP_STATUS SCTP_STATUS
+	SCTP_GET_PEER_ADDR_INFO,
+#define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO
+
+	/* Internal Socket Options. Some of the sctp library functions are 
+	 * implemented using these socket options.
+	 */
+	SCTP_SOCKOPT_BINDX_ADD = 100,/* BINDX requests for adding addresses. */
+#define SCTP_SOCKOPT_BINDX_ADD	SCTP_SOCKOPT_BINDX_ADD
+	SCTP_SOCKOPT_BINDX_REM, /* BINDX requests for removing addresses. */
+#define SCTP_SOCKOPT_BINDX_REM	SCTP_SOCKOPT_BINDX_REM
+	SCTP_SOCKOPT_PEELOFF, 	/* peel off association. */
+#define SCTP_SOCKOPT_PEELOFF	SCTP_SOCKOPT_PEELOFF
+	SCTP_GET_PEER_ADDRS_NUM, 	/* Get number of peer addresss. */
+#define SCTP_GET_PEER_ADDRS_NUM	SCTP_GET_PEER_ADDRS_NUM
+	SCTP_GET_PEER_ADDRS, 	/* Get all peer addresss. */
+#define SCTP_GET_PEER_ADDRS	SCTP_GET_PEER_ADDRS
+	SCTP_GET_LOCAL_ADDRS_NUM, 	/* Get number of local addresss. */
+#define SCTP_GET_LOCAL_ADDRS_NUM	SCTP_GET_LOCAL_ADDRS_NUM
+	SCTP_GET_LOCAL_ADDRS, 	/* Get all local addresss. */
+#define SCTP_GET_LOCAL_ADDRS	SCTP_GET_LOCAL_ADDRS
+};
+
+/*
+ * 5.2.1 SCTP Initiation Structure (SCTP_INIT)
+ *
+ *   This cmsghdr structure provides information for initializing new
+ *   SCTP associations with sendmsg().  The SCTP_INITMSG socket option
+ *   uses this same data structure.  This structure is not used for
+ *   recvmsg().
+ *
+ *   cmsg_level    cmsg_type      cmsg_data[]
+ *   ------------  ------------   ----------------------
+ *   IPPROTO_SCTP  SCTP_INIT      struct sctp_initmsg
+ *
+ */
+struct sctp_initmsg {
+	__u16 sinit_num_ostreams;
+	__u16 sinit_max_instreams;
+	__u16 sinit_max_attempts;
+	__u16 sinit_max_init_timeo;
+};
+
+/*
+ * 5.2.2 SCTP Header Information Structure (SCTP_SNDRCV)
+ *
+ *   This cmsghdr structure specifies SCTP options for sendmsg() and
+ *   describes SCTP header information about a received message through
+ *   recvmsg().
+ *
+ *   cmsg_level    cmsg_type      cmsg_data[]
+ *   ------------  ------------   ----------------------
+ *   IPPROTO_SCTP  SCTP_SNDRCV    struct sctp_sndrcvinfo
+ *
+ */
+struct sctp_sndrcvinfo {
+	__u16 sinfo_stream;
+	__u16 sinfo_ssn;
+	__u16 sinfo_flags;
+	__u32 sinfo_ppid;
+	__u32 sinfo_context;
+	__u32 sinfo_timetolive;
+	__u32 sinfo_tsn;
+	__u32 sinfo_cumtsn;
+	sctp_assoc_t sinfo_assoc_id;
+};
+
+/*
+ *  sinfo_flags: 16 bits (unsigned integer)
+ *
+ *   This field may contain any of the following flags and is composed of
+ *   a bitwise OR of these values.
+ */
+
+enum sctp_sinfo_flags {
+	MSG_UNORDERED = 1,  /* Send/receive message unordered. */
+	MSG_ADDR_OVER = 2,  /* Override the primary destination. */
+	MSG_ABORT=4,        /* Send an ABORT message to the peer. */
+	/* MSG_EOF is already defined per socket.h */
+};
+
+
+typedef union {
+	__u8   			raw;
+	struct sctp_initmsg	init;
+	struct sctp_sndrcvinfo	sndrcv;
+} sctp_cmsg_data_t;
+
+/* These are cmsg_types.  */
+typedef enum sctp_cmsg_type {
+	SCTP_INIT,              /* 5.2.1 SCTP Initiation Structure */
+	SCTP_SNDRCV,            /* 5.2.2 SCTP Header Information Structure */
+} sctp_cmsg_t;
+
+
+/*
+ * 5.3.1.1 SCTP_ASSOC_CHANGE
+ *
+ *   Communication notifications inform the ULP that an SCTP association
+ *   has either begun or ended. The identifier for a new association is
+ *   provided by this notificaion. The notification information has the
+ *   following format:
+ *
+ */
+struct sctp_assoc_change {
+	__u16 sac_type;
+	__u16 sac_flags;
+	__u32 sac_length;
+	__u16 sac_state;
+	__u16 sac_error;
+	__u16 sac_outbound_streams;
+	__u16 sac_inbound_streams;
+	sctp_assoc_t sac_assoc_id;
+};
+
+/*
+ *   sac_state: 32 bits (signed integer)
+ *
+ *   This field holds one of a number of values that communicate the
+ *   event that happened to the association.  They include:
+ *
+ *   Note:  The following state names deviate from the API draft as
+ *   the names clash too easily with other kernel symbols.
+ */
+enum sctp_sac_state {
+	SCTP_COMM_UP,
+	SCTP_COMM_LOST,
+	SCTP_RESTART,
+	SCTP_SHUTDOWN_COMP,
+	SCTP_CANT_STR_ASSOC,
+};
+
+/*
+ * 5.3.1.2 SCTP_PEER_ADDR_CHANGE
+ *
+ *   When a destination address on a multi-homed peer encounters a change
+ *   an interface details event is sent.  The information has the
+ *   following structure:
+ */
+struct sctp_paddr_change {
+	__u16 spc_type;
+	__u16 spc_flags;
+	__u32 spc_length;
+	struct sockaddr_storage spc_aaddr;
+	int spc_state;
+	int spc_error;
+	sctp_assoc_t spc_assoc_id;
+};
+
+/*
+ *    spc_state:  32 bits (signed integer)
+ *
+ *   This field holds one of a number of values that communicate the
+ *   event that happened to the address.  They include:
+ */
+enum sctp_spc_state {
+	SCTP_ADDR_AVAILABLE,
+	SCTP_ADDR_UNREACHABLE,
+	SCTP_ADDR_REMOVED,
+	SCTP_ADDR_ADDED,
+	SCTP_ADDR_MADE_PRIM,
+};
+
+
+/*
+ * 5.3.1.3 SCTP_REMOTE_ERROR
+ *
+ *   A remote peer may send an Operational Error message to its peer.
+ *   This message indicates a variety of error conditions on an
+ *   association. The entire error TLV as it appears on the wire is
+ *   included in a SCTP_REMOTE_ERROR event.  Please refer to the SCTP
+ *   specification [SCTP] and any extensions for a list of possible
+ *   error formats. SCTP error TLVs have the format:
+ */
+struct sctp_remote_error {
+	__u16 sre_type;
+	__u16 sre_flags;
+	__u32 sre_length;
+	__u16 sre_error;
+	sctp_assoc_t sre_assoc_id;
+	__u8 sre_data[0];
+};
+
+
+/*
+ * 5.3.1.4 SCTP_SEND_FAILED
+ *
+ *   If SCTP cannot deliver a message it may return the message as a
+ *   notification.
+ */
+struct sctp_send_failed {
+	__u16 ssf_type;
+	__u16 ssf_flags;
+	__u32 ssf_length;
+	__u32 ssf_error;
+	struct sctp_sndrcvinfo ssf_info;
+	sctp_assoc_t ssf_assoc_id;
+	__u8 ssf_data[0];
+};
+
+/*
+ *   ssf_flags: 16 bits (unsigned integer)
+ *
+ *   The flag value will take one of the following values
+ *
+ *   SCTP_DATA_UNSENT  - Indicates that the data was never put on
+ *                       the wire.
+ *
+ *   SCTP_DATA_SENT    - Indicates that the data was put on the wire.
+ *                       Note that this does not necessarily mean that the
+ *                       data was (or was not) successfully delivered.
+ */
+enum sctp_ssf_flags {
+	SCTP_DATA_UNSENT,
+	SCTP_DATA_SENT,
+};
+
+/*
+ * 5.3.1.5 SCTP_SHUTDOWN_EVENT
+ *
+ *   When a peer sends a SHUTDOWN, SCTP delivers this notification to
+ *   inform the application that it should cease sending data.
+ */
+struct sctp_shutdown_event {
+	__u16 sse_type;
+	__u16 sse_flags;
+	__u32 sse_length;
+	sctp_assoc_t sse_assoc_id;
+};
+
+/*
+ * 5.3.1.6 SCTP_ADAPTION_INDICATION
+ *
+ *   When a peer sends a Adaption Layer Indication parameter , SCTP
+ *   delivers this notification to inform the application
+ *   that of the peers requested adaption layer.
+ */
+struct sctp_adaption_event {
+	__u16 sai_type;
+	__u16 sai_flags;
+	__u32 sai_length;
+	__u32 sai_adaption_ind;
+	sctp_assoc_t sai_assoc_id;
+};
+
+/*
+ * 5.3.1.7 SCTP_PARTIAL_DELIVERY_EVENT
+ *
+ *   When a receiver is engaged in a partial delivery of a
+ *   message this notification will be used to indicate
+ *   various events.
+ */
+struct sctp_pdapi_event {
+	__u16 pdapi_type;
+	__u16 pdapi_flags;
+	__u32 pdapi_length;
+	__u32 pdapi_indication;
+	sctp_assoc_t pdapi_assoc_id;
+};
+
+enum { SCTP_PARTIAL_DELIVERY_ABORTED=0, };
+
+/*
+ * Described in Section 7.3
+ *   Ancillary Data and Notification Interest Options
+ */
+struct sctp_event_subscribe {
+	__u8 sctp_data_io_event;
+	__u8 sctp_association_event;
+	__u8 sctp_address_event;
+	__u8 sctp_send_failure_event;
+	__u8 sctp_peer_error_event;
+	__u8 sctp_shutdown_event;
+	__u8 sctp_partial_delivery_event;
+	__u8 sctp_adaption_layer_event;
+};
+
+/*
+ * 5.3.1 SCTP Notification Structure
+ *
+ *   The notification structure is defined as the union of all
+ *   notification types.
+ *
+ */
+union sctp_notification {
+	struct {
+		__u16 sn_type;             /* Notification type. */
+		__u16 sn_flags;
+		__u32 sn_length;
+	} sn_header;
+	struct sctp_assoc_change sn_assoc_change;
+	struct sctp_paddr_change sn_paddr_change;
+	struct sctp_remote_error sn_remote_error;
+	struct sctp_send_failed sn_send_failed;
+	struct sctp_shutdown_event sn_shutdown_event;
+	struct sctp_adaption_event sn_adaption_event;
+	struct sctp_pdapi_event sn_pdapi_event;
+};
+
+/* Section 5.3.1
+ * All standard values for sn_type flags are greater than 2^15.
+ * Values from 2^15 and down are reserved.
+ */
+
+enum sctp_sn_type {
+	SCTP_SN_TYPE_BASE     = (1<<15),
+	SCTP_ASSOC_CHANGE,
+	SCTP_PEER_ADDR_CHANGE,
+	SCTP_SEND_FAILED,
+	SCTP_REMOTE_ERROR,
+	SCTP_SHUTDOWN_EVENT,
+	SCTP_PARTIAL_DELIVERY_EVENT,
+	SCTP_ADAPTION_INDICATION,
+};
+
+/* Notification error codes used to fill up the error fields in some
+ * notifications.
+ * SCTP_PEER_ADDRESS_CHAGE 	: spc_error
+ * SCTP_ASSOC_CHANGE		: sac_error
+ * These names should be potentially included in the draft 04 of the SCTP
+ * sockets API specification.
+ */
+typedef enum sctp_sn_error {
+	SCTP_FAILED_THRESHOLD,
+	SCTP_RECEIVED_SACK,
+	SCTP_HEARTBEAT_SUCCESS,
+	SCTP_RESPONSE_TO_USER_REQ,
+	SCTP_INTERNAL_ERROR,
+	SCTP_SHUTDOWN_GUARD_EXPIRES,
+	SCTP_PEER_FAULTY,
+} sctp_sn_error_t;
+
+/*
+ * 7.1.1 Retransmission Timeout Parameters (SCTP_RTOINFO)
+ *
+ *   The protocol parameters used to initialize and bound retransmission
+ *   timeout (RTO) are tunable.  See [SCTP] for more information on how
+ *   these parameters are used in RTO calculation. 
+ */
+struct sctp_rtoinfo {
+	sctp_assoc_t	srto_assoc_id;
+	__u32		srto_initial;
+	__u32		srto_max;
+	__u32		srto_min;
+};
+
+/*
+ * 7.1.2 Association Parameters (SCTP_ASSOCINFO)
+ *
+ *   This option is used to both examine and set various association and
+ *   endpoint parameters.
+ */
+struct sctp_assocparams {
+	sctp_assoc_t	sasoc_assoc_id;
+	__u16		sasoc_asocmaxrxt;
+	__u16		sasoc_number_peer_destinations;
+	__u32		sasoc_peer_rwnd;
+	__u32		sasoc_local_rwnd;
+	__u32		sasoc_cookie_life;
+};
+
+/*
+ * 7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR)
+ *
+ *  Requests that the peer mark the enclosed address as the association
+ *  primary. The enclosed address must be one of the association's
+ *  locally bound addresses. The following structure is used to make a
+ *   set primary request:
+ */
+struct sctp_setpeerprim {
+	sctp_assoc_t            sspp_assoc_id;
+	struct sockaddr_storage sspp_addr;
+};
+
+/*
+ * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR)
+ *
+ *  Requests that the local SCTP stack use the enclosed peer address as
+ *  the association primary. The enclosed address must be one of the
+ *  association peer's addresses. The following structure is used to
+ *  make a set peer primary request:
+ */
+struct sctp_prim {
+	sctp_assoc_t            ssp_assoc_id;
+	struct sockaddr_storage ssp_addr;
+};
+
+/*
+ * 7.1.11 Set Adaption Layer Indicator (SCTP_ADAPTION_LAYER)
+ *
+ * Requests that the local endpoint set the specified Adaption Layer
+ * Indication parameter for all future INIT and INIT-ACK exchanges.
+ */
+struct sctp_setadaption {
+	__u32	ssb_adaption_ind;
+};
+
+/*
+ * 7.1.13 Peer Address Parameters  (SCTP_PEER_ADDR_PARAMS)
+ *
+ *   Applications can enable or disable heartbeats for any peer address
+ *   of an association, modify an address's heartbeat interval, force a
+ *   heartbeat to be sent immediately, and adjust the address's maximum
+ *   number of retransmissions sent before an address is considered
+ *   unreachable. The following structure is used to access and modify an
+ *   address's parameters:
+ */
+struct sctp_paddrparams {
+	sctp_assoc_t		spp_assoc_id;
+	struct sockaddr_storage	spp_address;
+	__u32			spp_hbinterval;
+	__u16			spp_pathmaxrxt;
+};
+
+/*
+ * 7.2.2 Peer Address Information
+ *
+ *   Applications can retrieve information about a specific peer address
+ *   of an association, including its reachability state, congestion
+ *   window, and retransmission timer values.  This information is
+ *   read-only. The following structure is used to access this
+ *   information:
+ */
+struct sctp_paddrinfo {
+	sctp_assoc_t		spinfo_assoc_id;
+	struct sockaddr_storage	spinfo_address;
+	__s32			spinfo_state;
+	__u32			spinfo_cwnd;
+	__u32			spinfo_srtt;
+	__u32			spinfo_rto;
+	__u32			spinfo_mtu;
+};
+
+/* Peer addresses's state. */
+enum sctp_spinfo_state {
+	SCTP_INACTIVE,
+	SCTP_ACTIVE,
+};
+
+/*
+ * 7.2.1 Association Status (SCTP_STATUS)
+ *
+ *   Applications can retrieve current status information about an
+ *   association, including association state, peer receiver window size,
+ *   number of unacked data chunks, and number of data chunks pending
+ *   receipt.  This information is read-only.  The following structure is
+ *   used to access this information:
+ */
+struct sctp_status {
+	sctp_assoc_t		sstat_assoc_id;
+	__s32			sstat_state;
+	__u32			sstat_rwnd;
+	__u16			sstat_unackdata;
+	__u16			sstat_penddata;
+	__u16			sstat_instrms;
+	__u16			sstat_outstrms;
+	__u32			sstat_fragmentation_point;
+	struct sctp_paddrinfo	sstat_primary;
+};
+
+/*
+ * 8.3, 8.5 get all peer/local addresses in an association.
+ * This parameter struct is used by SCTP_GET_PEER_ADDRS and 
+ * SCTP_GET_LOCAL_ADDRS socket options used internally to implement
+ * sctp_getpaddrs() and sctp_getladdrs() API. 
+ */
+struct sctp_getaddrs {
+	sctp_assoc_t            assoc_id;
+	int			addr_num;
+	struct sockaddr		__user *addrs;
+};
+
+/* These are bit fields for msghdr->msg_flags.  See section 5.1.  */
+/* On user space Linux, these live in <bits/socket.h> as an enum.  */
+enum sctp_msg_flags {
+	MSG_NOTIFICATION = 0x8000,
+#define MSG_NOTIFICATION MSG_NOTIFICATION
+};
+
+/*
+ * 8.1 sctp_bindx()
+ *
+ * The flags parameter is formed from the bitwise OR of zero or more of the
+ * following currently defined flags:
+ */
+#define SCTP_BINDX_ADD_ADDR 0x01
+#define SCTP_BINDX_REM_ADDR 0x02
+
+/* This is the structure that is passed as an argument(optval) to
+ * getsockopt(SCTP_SOCKOPT_PEELOFF).
+ */
+typedef struct {
+	sctp_assoc_t associd;
+	int sd;
+} sctp_peeloff_arg_t;
+
+#endif /* __net_sctp_user_h__ */
diff --git a/include/net/slhc_vj.h b/include/net/slhc_vj.h
new file mode 100644
index 000000000000..0b2c2784f333
--- /dev/null
+++ b/include/net/slhc_vj.h
@@ -0,0 +1,188 @@
+#ifndef _SLHC_H
+#define _SLHC_H
+/*
+ * Definitions for tcp compression routines.
+ *
+ * $Header: slcompress.h,v 1.10 89/12/31 08:53:02 van Exp $
+ *
+ * Copyright (c) 1989 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
+ *	- Initial distribution.
+ *
+ *
+ * modified for KA9Q Internet Software Package by
+ * Katie Stevens (dkstevens@ucdavis.edu)
+ * University of California, Davis
+ * Computing Services
+ *	- 01-31-90	initial adaptation
+ *
+ *	- Feb 1991	Bill_Simpson@um.cc.umich.edu
+ *			variable number of conversation slots
+ *			allow zero or one slots
+ *			separate routines
+ *			status display
+ */
+
+/*
+ * Compressed packet format:
+ *
+ * The first octet contains the packet type (top 3 bits), TCP
+ * 'push' bit, and flags that indicate which of the 4 TCP sequence
+ * numbers have changed (bottom 5 bits).  The next octet is a
+ * conversation number that associates a saved IP/TCP header with
+ * the compressed packet.  The next two octets are the TCP checksum
+ * from the original datagram.  The next 0 to 15 octets are
+ * sequence number changes, one change per bit set in the header
+ * (there may be no changes and there are two special cases where
+ * the receiver implicitly knows what changed -- see below).
+ *
+ * There are 5 numbers which can change (they are always inserted
+ * in the following order): TCP urgent pointer, window,
+ * acknowledgment, sequence number and IP ID.  (The urgent pointer
+ * is different from the others in that its value is sent, not the
+ * change in value.)  Since typical use of SLIP links is biased
+ * toward small packets (see comments on MTU/MSS below), changes
+ * use a variable length coding with one octet for numbers in the
+ * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
+ * range 256 - 65535 or 0.  (If the change in sequence number or
+ * ack is more than 65535, an uncompressed packet is sent.)
+ */
+
+/*
+ * Packet types (must not conflict with IP protocol version)
+ *
+ * The top nibble of the first octet is the packet type.  There are
+ * three possible types: IP (not proto TCP or tcp with one of the
+ * control flags set); uncompressed TCP (a normal IP/TCP packet but
+ * with the 8-bit protocol field replaced by an 8-bit connection id --
+ * this type of packet syncs the sender & receiver); and compressed
+ * TCP (described above).
+ *
+ * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
+ * is logically part of the 4-bit "changes" field that follows.  Top
+ * three bits are actual packet type.  For backward compatibility
+ * and in the interest of conserving bits, numbers are chosen so the
+ * IP protocol version number (4) which normally appears in this nibble
+ * means "IP packet".
+ */
+
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+/* SLIP compression masks for len/vers byte */
+#define SL_TYPE_IP 0x40
+#define SL_TYPE_UNCOMPRESSED_TCP 0x70
+#define SL_TYPE_COMPRESSED_TCP 0x80
+#define SL_TYPE_ERROR 0x00
+
+/* Bits in first octet of compressed packet */
+#define NEW_C	0x40	/* flag bits for what changed in a packet */
+#define NEW_I	0x20
+#define NEW_S	0x08
+#define NEW_A	0x04
+#define NEW_W	0x02
+#define NEW_U	0x01
+
+/* reserved, special-case values of above */
+#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
+#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
+#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
+
+#define TCP_PUSH_BIT 0x10
+
+/*
+ * data type and sizes conversion assumptions:
+ *
+ *	VJ code		KA9Q style	generic
+ *	u_char		byte_t		unsigned char	 8 bits
+ *	u_short		int16		unsigned short	16 bits
+ *	u_int		int16		unsigned short	16 bits
+ *	u_long		unsigned long	unsigned long	32 bits
+ *	int		int32		long		32 bits
+ */
+
+typedef __u8 byte_t;
+typedef __u32 int32;
+
+/*
+ * "state" data for each active tcp conversation on the wire.  This is
+ * basically a copy of the entire IP/TCP header from the last packet
+ * we saw from the conversation together with a small identifier
+ * the transmit & receive ends of the line use to locate saved header.
+ */
+struct cstate {
+	byte_t	cs_this;	/* connection id number (xmit) */
+	struct cstate *next;	/* next in ring (xmit) */
+	struct iphdr cs_ip;	/* ip/tcp hdr from most recent packet */
+	struct tcphdr cs_tcp;
+	unsigned char cs_ipopt[64];
+	unsigned char cs_tcpopt[64];
+	int cs_hsize;
+};
+#define NULLSLSTATE	(struct cstate *)0
+
+/*
+ * all the state data for one serial line (we need one of these per line).
+ */
+struct slcompress {
+	struct cstate *tstate;	/* transmit connection states (array)*/
+	struct cstate *rstate;	/* receive connection states (array)*/
+
+	byte_t tslot_limit;	/* highest transmit slot id (0-l)*/
+	byte_t rslot_limit;	/* highest receive slot id (0-l)*/
+
+	byte_t xmit_oldest;	/* oldest xmit in ring */
+	byte_t xmit_current;	/* most recent xmit id */
+	byte_t recv_current;	/* most recent rcvd id */
+
+	byte_t flags;
+#define SLF_TOSS	0x01	/* tossing rcvd frames until id received */
+
+	int32 sls_o_nontcp;	/* outbound non-TCP packets */
+	int32 sls_o_tcp;	/* outbound TCP packets */
+	int32 sls_o_uncompressed;	/* outbound uncompressed packets */
+	int32 sls_o_compressed;	/* outbound compressed packets */
+	int32 sls_o_searches;	/* searches for connection state */
+	int32 sls_o_misses;	/* times couldn't find conn. state */
+
+	int32 sls_i_uncompressed;	/* inbound uncompressed packets */
+	int32 sls_i_compressed;	/* inbound compressed packets */
+	int32 sls_i_error;	/* inbound error packets */
+	int32 sls_i_tossed;	/* inbound packets tossed because of error */
+
+	int32 sls_i_runt;
+	int32 sls_i_badcheck;
+};
+#define NULLSLCOMPR	(struct slcompress *)0
+
+#define __ARGS(x) x
+
+/* In slhc.c: */
+struct slcompress *slhc_init __ARGS((int rslots, int tslots));
+void slhc_free __ARGS((struct slcompress *comp));
+
+int slhc_compress __ARGS((struct slcompress *comp, unsigned char *icp,
+			  int isize, unsigned char *ocp, unsigned char **cpp,
+			  int compress_cid));
+int slhc_uncompress __ARGS((struct slcompress *comp, unsigned char *icp,
+			    int isize));
+int slhc_remember __ARGS((struct slcompress *comp, unsigned char *icp,
+			  int isize));
+int slhc_toss __ARGS((struct slcompress *comp));
+
+#endif	/* _SLHC_H */
diff --git a/include/net/snmp.h b/include/net/snmp.h
new file mode 100644
index 000000000000..a15ab256276e
--- /dev/null
+++ b/include/net/snmp.h
@@ -0,0 +1,145 @@
+/*
+ *
+ *		SNMP MIB entries for the IP subsystem.
+ *		
+ *		Alan Cox <gw4pts@gw4pts.ampr.org>
+ *
+ *		We don't chose to implement SNMP in the kernel (this would
+ *		be silly as SNMP is a pain in the backside in places). We do
+ *		however need to collect the MIB statistics and export them
+ *		out of /proc (eventually)
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		$Id: snmp.h,v 1.19 2001/06/14 13:40:46 davem Exp $
+ *
+ */
+ 
+#ifndef _SNMP_H
+#define _SNMP_H
+
+#include <linux/cache.h>
+#include <linux/snmp.h>
+
+/*
+ * Mibs are stored in array of unsigned long.
+ */
+/*
+ * struct snmp_mib{}
+ *  - list of entries for particular API (such as /proc/net/snmp)
+ *  - name of entries.
+ */
+struct snmp_mib {
+	char *name;
+	int entry;
+};
+
+#define SNMP_MIB_ITEM(_name,_entry)	{	\
+	.name = _name,				\
+	.entry = _entry,			\
+}
+
+#define SNMP_MIB_SENTINEL {	\
+	.name = NULL,		\
+	.entry = 0,		\
+}
+
+/*
+ * We use all unsigned longs. Linux will soon be so reliable that even 
+ * these will rapidly get too small 8-). Seriously consider the IpInReceives 
+ * count on the 20Gb/s + networks people expect in a few years time!
+ */
+
+/* 
+ * The rule for padding: 
+ * Best is power of two because then the right structure can be found by a 
+ * simple shift. The structure should be always cache line aligned.
+ * gcc needs n=alignto(cachelinesize, popcnt(sizeof(bla_mib))) shift/add 
+ * instructions to emulate multiply in case it is not power-of-two. 
+ * Currently n is always <=3 for all sizes so simple cache line alignment 
+ * is enough. 
+ * 
+ * The best solution would be a global CPU local area , especially on 64 
+ * and 128byte cacheline machine it makes a *lot* of sense -AK
+ */ 
+
+#define __SNMP_MIB_ALIGN__	____cacheline_aligned
+
+/* IPstats */
+#define IPSTATS_MIB_MAX	__IPSTATS_MIB_MAX
+struct ipstats_mib {
+	unsigned long	mibs[IPSTATS_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* ICMP */
+#define ICMP_MIB_DUMMY	__ICMP_MIB_MAX
+#define ICMP_MIB_MAX	(__ICMP_MIB_MAX + 1)
+
+struct icmp_mib {
+	unsigned long	mibs[ICMP_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* ICMP6 (IPv6-ICMP) */
+#define ICMP6_MIB_MAX	__ICMP6_MIB_MAX
+struct icmpv6_mib {
+	unsigned long	mibs[ICMP6_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* TCP */
+#define TCP_MIB_MAX	__TCP_MIB_MAX
+struct tcp_mib {
+	unsigned long	mibs[TCP_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* UDP */
+#define UDP_MIB_MAX	__UDP_MIB_MAX
+struct udp_mib {
+	unsigned long	mibs[UDP_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* SCTP */
+#define SCTP_MIB_MAX	__SCTP_MIB_MAX
+struct sctp_mib {
+	unsigned long	mibs[SCTP_MIB_MAX];
+} __SNMP_MIB_ALIGN__;
+
+/* Linux */
+#define LINUX_MIB_MAX	__LINUX_MIB_MAX
+struct linux_mib {
+	unsigned long	mibs[LINUX_MIB_MAX];
+};
+
+
+/* 
+ * FIXME: On x86 and some other CPUs the split into user and softirq parts
+ * is not needed because addl $1,memory is atomic against interrupts (but 
+ * atomic_inc would be overkill because of the lock cycles). Wants new 
+ * nonlocked_atomic_inc() primitives -AK
+ */ 
+#define DEFINE_SNMP_STAT(type, name)	\
+	__typeof__(type) *name[2]
+#define DECLARE_SNMP_STAT(type, name)	\
+	extern __typeof__(type) *name[2]
+
+#define SNMP_STAT_BHPTR(name)	(name[0])
+#define SNMP_STAT_USRPTR(name)	(name[1])
+
+#define SNMP_INC_STATS_BH(mib, field) 	\
+	(per_cpu_ptr(mib[0], _smp_processor_id())->mibs[field]++)
+#define SNMP_INC_STATS_OFFSET_BH(mib, field, offset)	\
+	(per_cpu_ptr(mib[0], _smp_processor_id())->mibs[field + (offset)]++)
+#define SNMP_INC_STATS_USER(mib, field) \
+	(per_cpu_ptr(mib[1], _smp_processor_id())->mibs[field]++)
+#define SNMP_INC_STATS(mib, field) 	\
+	(per_cpu_ptr(mib[!in_softirq()], _smp_processor_id())->mibs[field]++)
+#define SNMP_DEC_STATS(mib, field) 	\
+	(per_cpu_ptr(mib[!in_softirq()], _smp_processor_id())->mibs[field]--)
+#define SNMP_ADD_STATS_BH(mib, field, addend) 	\
+	(per_cpu_ptr(mib[0], _smp_processor_id())->mibs[field] += addend)
+#define SNMP_ADD_STATS_USER(mib, field, addend) 	\
+	(per_cpu_ptr(mib[1], _smp_processor_id())->mibs[field] += addend)
+
+#endif
diff --git a/include/net/sock.h b/include/net/sock.h
new file mode 100644
index 000000000000..be81cabd0da3
--- /dev/null
+++ b/include/net/sock.h
@@ -0,0 +1,1297 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the AF_INET socket handler.
+ *
+ * Version:	@(#)sock.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Florian La Roche <flla@stud.uni-sb.de>
+ *
+ * Fixes:
+ *		Alan Cox	:	Volatiles in skbuff pointers. See
+ *					skbuff comments. May be overdone,
+ *					better to prove they can be removed
+ *					than the reverse.
+ *		Alan Cox	:	Added a zapped field for tcp to note
+ *					a socket is reset and must stay shut up
+ *		Alan Cox	:	New fields for options
+ *	Pauline Middelink	:	identd support
+ *		Alan Cox	:	Eliminate low level recv/recvfrom
+ *		David S. Miller	:	New socket lookup architecture.
+ *              Steve Whitehouse:       Default routines for sock_ops
+ *              Arnaldo C. Melo :	removed net_pinfo, tp_pinfo and made
+ *              			protinfo be just a void pointer, as the
+ *              			protocol specific parts were moved to
+ *              			respective headers and ipv4/v6, etc now
+ *              			use private slabcaches for its socks
+ *              Pedro Hortas	:	New flags field for socket options
+ *
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _SOCK_H
+#define _SOCK_H
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>	/* struct sk_buff */
+#include <linux/security.h>
+
+#include <linux/filter.h>
+
+#include <asm/atomic.h>
+#include <net/dst.h>
+#include <net/checksum.h>
+
+/*
+ * This structure really needs to be cleaned up.
+ * Most of it is for TCP, and not used by any of
+ * the other protocols.
+ */
+
+/* Define this to get the SOCK_DBG debugging facility. */
+#define SOCK_DEBUGGING
+#ifdef SOCK_DEBUGGING
+#define SOCK_DEBUG(sk, msg...) do { if ((sk) && sock_flag((sk), SOCK_DBG)) \
+					printk(KERN_DEBUG msg); } while (0)
+#else
+#define SOCK_DEBUG(sk, msg...) do { } while (0)
+#endif
+
+/* This is the per-socket lock.  The spinlock provides a synchronization
+ * between user contexts and software interrupt processing, whereas the
+ * mini-semaphore synchronizes multiple users amongst themselves.
+ */
+struct sock_iocb;
+typedef struct {
+	spinlock_t		slock;
+	struct sock_iocb	*owner;
+	wait_queue_head_t	wq;
+} socket_lock_t;
+
+#define sock_lock_init(__sk) \
+do {	spin_lock_init(&((__sk)->sk_lock.slock)); \
+	(__sk)->sk_lock.owner = NULL; \
+	init_waitqueue_head(&((__sk)->sk_lock.wq)); \
+} while(0)
+
+struct sock;
+
+/**
+  *	struct sock_common - minimal network layer representation of sockets
+  *	@skc_family - network address family
+  *	@skc_state - Connection state
+  *	@skc_reuse - %SO_REUSEADDR setting
+  *	@skc_bound_dev_if - bound device index if != 0
+  *	@skc_node - main hash linkage for various protocol lookup tables
+  *	@skc_bind_node - bind hash linkage for various protocol lookup tables
+  *	@skc_refcnt - reference count
+  *
+  *	This is the minimal network layer representation of sockets, the header
+  *	for struct sock and struct tcp_tw_bucket.
+  */
+struct sock_common {
+	unsigned short		skc_family;
+	volatile unsigned char	skc_state;
+	unsigned char		skc_reuse;
+	int			skc_bound_dev_if;
+	struct hlist_node	skc_node;
+	struct hlist_node	skc_bind_node;
+	atomic_t		skc_refcnt;
+};
+
+/**
+  *	struct sock - network layer representation of sockets
+  *	@__sk_common - shared layout with tcp_tw_bucket
+  *	@sk_shutdown - mask of %SEND_SHUTDOWN and/or %RCV_SHUTDOWN
+  *	@sk_userlocks - %SO_SNDBUF and %SO_RCVBUF settings
+  *	@sk_lock -	synchronizer
+  *	@sk_rcvbuf - size of receive buffer in bytes
+  *	@sk_sleep - sock wait queue
+  *	@sk_dst_cache - destination cache
+  *	@sk_dst_lock - destination cache lock
+  *	@sk_policy - flow policy
+  *	@sk_rmem_alloc - receive queue bytes committed
+  *	@sk_receive_queue - incoming packets
+  *	@sk_wmem_alloc - transmit queue bytes committed
+  *	@sk_write_queue - Packet sending queue
+  *	@sk_omem_alloc - "o" is "option" or "other"
+  *	@sk_wmem_queued - persistent queue size
+  *	@sk_forward_alloc - space allocated forward
+  *	@sk_allocation - allocation mode
+  *	@sk_sndbuf - size of send buffer in bytes
+  *	@sk_flags - %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE, %SO_OOBINLINE settings
+  *	@sk_no_check - %SO_NO_CHECK setting, wether or not checkup packets
+  *	@sk_route_caps - route capabilities (e.g. %NETIF_F_TSO)
+  *	@sk_lingertime - %SO_LINGER l_linger setting
+  *	@sk_hashent - hash entry in several tables (e.g. tcp_ehash)
+  *	@sk_backlog - always used with the per-socket spinlock held
+  *	@sk_callback_lock - used with the callbacks in the end of this struct
+  *	@sk_error_queue - rarely used
+  *	@sk_prot - protocol handlers inside a network family
+  *	@sk_err - last error
+  *	@sk_err_soft - errors that don't cause failure but are the cause of a persistent failure not just 'timed out'
+  *	@sk_ack_backlog - current listen backlog
+  *	@sk_max_ack_backlog - listen backlog set in listen()
+  *	@sk_priority - %SO_PRIORITY setting
+  *	@sk_type - socket type (%SOCK_STREAM, etc)
+  *	@sk_protocol - which protocol this socket belongs in this network family
+  *	@sk_peercred - %SO_PEERCRED setting
+  *	@sk_rcvlowat - %SO_RCVLOWAT setting
+  *	@sk_rcvtimeo - %SO_RCVTIMEO setting
+  *	@sk_sndtimeo - %SO_SNDTIMEO setting
+  *	@sk_filter - socket filtering instructions
+  *	@sk_protinfo - private area, net family specific, when not using slab
+  *	@sk_timer - sock cleanup timer
+  *	@sk_stamp - time stamp of last packet received
+  *	@sk_socket - Identd and reporting IO signals
+  *	@sk_user_data - RPC layer private data
+  *	@sk_sndmsg_page - cached page for sendmsg
+  *	@sk_sndmsg_off - cached offset for sendmsg
+  *	@sk_send_head - front of stuff to transmit
+  *	@sk_write_pending - a write to stream socket waits to start
+  *	@sk_state_change - callback to indicate change in the state of the sock
+  *	@sk_data_ready - callback to indicate there is data to be processed
+  *	@sk_write_space - callback to indicate there is bf sending space available
+  *	@sk_error_report - callback to indicate errors (e.g. %MSG_ERRQUEUE)
+  *	@sk_backlog_rcv - callback to process the backlog
+  *	@sk_destruct - called at sock freeing time, i.e. when all refcnt == 0
+ */
+struct sock {
+	/*
+	 * Now struct tcp_tw_bucket also uses sock_common, so please just
+	 * don't add nothing before this first member (__sk_common) --acme
+	 */
+	struct sock_common	__sk_common;
+#define sk_family		__sk_common.skc_family
+#define sk_state		__sk_common.skc_state
+#define sk_reuse		__sk_common.skc_reuse
+#define sk_bound_dev_if		__sk_common.skc_bound_dev_if
+#define sk_node			__sk_common.skc_node
+#define sk_bind_node		__sk_common.skc_bind_node
+#define sk_refcnt		__sk_common.skc_refcnt
+	unsigned char		sk_shutdown : 2,
+				sk_no_check : 2,
+				sk_userlocks : 4;
+	unsigned char		sk_protocol;
+	unsigned short		sk_type;
+	int			sk_rcvbuf;
+	socket_lock_t		sk_lock;
+	wait_queue_head_t	*sk_sleep;
+	struct dst_entry	*sk_dst_cache;
+	struct xfrm_policy	*sk_policy[2];
+	rwlock_t		sk_dst_lock;
+	atomic_t		sk_rmem_alloc;
+	atomic_t		sk_wmem_alloc;
+	atomic_t		sk_omem_alloc;
+	struct sk_buff_head	sk_receive_queue;
+	struct sk_buff_head	sk_write_queue;
+	int			sk_wmem_queued;
+	int			sk_forward_alloc;
+	unsigned int		sk_allocation;
+	int			sk_sndbuf;
+	int			sk_route_caps;
+	int			sk_hashent;
+	unsigned long 		sk_flags;
+	unsigned long	        sk_lingertime;
+	/*
+	 * The backlog queue is special, it is always used with
+	 * the per-socket spinlock held and requires low latency
+	 * access. Therefore we special case it's implementation.
+	 */
+	struct {
+		struct sk_buff *head;
+		struct sk_buff *tail;
+	} sk_backlog;
+	struct sk_buff_head	sk_error_queue;
+	struct proto		*sk_prot;
+	rwlock_t		sk_callback_lock;
+	int			sk_err,
+				sk_err_soft;
+	unsigned short		sk_ack_backlog;
+	unsigned short		sk_max_ack_backlog;
+	__u32			sk_priority;
+	struct ucred		sk_peercred;
+	int			sk_rcvlowat;
+	long			sk_rcvtimeo;
+	long			sk_sndtimeo;
+	struct sk_filter      	*sk_filter;
+	void			*sk_protinfo;
+	struct timer_list	sk_timer;
+	struct timeval		sk_stamp;
+	struct socket		*sk_socket;
+	void			*sk_user_data;
+	struct page		*sk_sndmsg_page;
+	struct sk_buff		*sk_send_head;
+	__u32			sk_sndmsg_off;
+	int			sk_write_pending;
+	void			*sk_security;
+	void			(*sk_state_change)(struct sock *sk);
+	void			(*sk_data_ready)(struct sock *sk, int bytes);
+	void			(*sk_write_space)(struct sock *sk);
+	void			(*sk_error_report)(struct sock *sk);
+  	int			(*sk_backlog_rcv)(struct sock *sk,
+						  struct sk_buff *skb);  
+	void                    (*sk_destruct)(struct sock *sk);
+};
+
+/*
+ * Hashed lists helper routines
+ */
+static inline struct sock *__sk_head(struct hlist_head *head)
+{
+	return hlist_entry(head->first, struct sock, sk_node);
+}
+
+static inline struct sock *sk_head(struct hlist_head *head)
+{
+	return hlist_empty(head) ? NULL : __sk_head(head);
+}
+
+static inline struct sock *sk_next(struct sock *sk)
+{
+	return sk->sk_node.next ?
+		hlist_entry(sk->sk_node.next, struct sock, sk_node) : NULL;
+}
+
+static inline int sk_unhashed(struct sock *sk)
+{
+	return hlist_unhashed(&sk->sk_node);
+}
+
+static inline int sk_hashed(struct sock *sk)
+{
+	return sk->sk_node.pprev != NULL;
+}
+
+static __inline__ void sk_node_init(struct hlist_node *node)
+{
+	node->pprev = NULL;
+}
+
+static __inline__ void __sk_del_node(struct sock *sk)
+{
+	__hlist_del(&sk->sk_node);
+}
+
+static __inline__ int __sk_del_node_init(struct sock *sk)
+{
+	if (sk_hashed(sk)) {
+		__sk_del_node(sk);
+		sk_node_init(&sk->sk_node);
+		return 1;
+	}
+	return 0;
+}
+
+/* Grab socket reference count. This operation is valid only
+   when sk is ALREADY grabbed f.e. it is found in hash table
+   or a list and the lookup is made under lock preventing hash table
+   modifications.
+ */
+
+static inline void sock_hold(struct sock *sk)
+{
+	atomic_inc(&sk->sk_refcnt);
+}
+
+/* Ungrab socket in the context, which assumes that socket refcnt
+   cannot hit zero, f.e. it is true in context of any socketcall.
+ */
+static inline void __sock_put(struct sock *sk)
+{
+	atomic_dec(&sk->sk_refcnt);
+}
+
+static __inline__ int sk_del_node_init(struct sock *sk)
+{
+	int rc = __sk_del_node_init(sk);
+
+	if (rc) {
+		/* paranoid for a while -acme */
+		WARN_ON(atomic_read(&sk->sk_refcnt) == 1);
+		__sock_put(sk);
+	}
+	return rc;
+}
+
+static __inline__ void __sk_add_node(struct sock *sk, struct hlist_head *list)
+{
+	hlist_add_head(&sk->sk_node, list);
+}
+
+static __inline__ void sk_add_node(struct sock *sk, struct hlist_head *list)
+{
+	sock_hold(sk);
+	__sk_add_node(sk, list);
+}
+
+static __inline__ void __sk_del_bind_node(struct sock *sk)
+{
+	__hlist_del(&sk->sk_bind_node);
+}
+
+static __inline__ void sk_add_bind_node(struct sock *sk,
+					struct hlist_head *list)
+{
+	hlist_add_head(&sk->sk_bind_node, list);
+}
+
+#define sk_for_each(__sk, node, list) \
+	hlist_for_each_entry(__sk, node, list, sk_node)
+#define sk_for_each_from(__sk, node) \
+	if (__sk && ({ node = &(__sk)->sk_node; 1; })) \
+		hlist_for_each_entry_from(__sk, node, sk_node)
+#define sk_for_each_continue(__sk, node) \
+	if (__sk && ({ node = &(__sk)->sk_node; 1; })) \
+		hlist_for_each_entry_continue(__sk, node, sk_node)
+#define sk_for_each_safe(__sk, node, tmp, list) \
+	hlist_for_each_entry_safe(__sk, node, tmp, list, sk_node)
+#define sk_for_each_bound(__sk, node, list) \
+	hlist_for_each_entry(__sk, node, list, sk_bind_node)
+
+/* Sock flags */
+enum sock_flags {
+	SOCK_DEAD,
+	SOCK_DONE,
+	SOCK_URGINLINE,
+	SOCK_KEEPOPEN,
+	SOCK_LINGER,
+	SOCK_DESTROY,
+	SOCK_BROADCAST,
+	SOCK_TIMESTAMP,
+	SOCK_ZAPPED,
+	SOCK_USE_WRITE_QUEUE, /* whether to call sk->sk_write_space in sock_wfree */
+	SOCK_DBG, /* %SO_DEBUG setting */
+	SOCK_RCVTSTAMP, /* %SO_TIMESTAMP setting */
+	SOCK_NO_LARGESEND, /* whether to sent large segments or not */
+	SOCK_LOCALROUTE, /* route locally only, %SO_DONTROUTE setting */
+	SOCK_QUEUE_SHRUNK, /* write queue has been shrunk recently */
+};
+
+static inline void sock_set_flag(struct sock *sk, enum sock_flags flag)
+{
+	__set_bit(flag, &sk->sk_flags);
+}
+
+static inline void sock_reset_flag(struct sock *sk, enum sock_flags flag)
+{
+	__clear_bit(flag, &sk->sk_flags);
+}
+
+static inline int sock_flag(struct sock *sk, enum sock_flags flag)
+{
+	return test_bit(flag, &sk->sk_flags);
+}
+
+static inline void sk_acceptq_removed(struct sock *sk)
+{
+	sk->sk_ack_backlog--;
+}
+
+static inline void sk_acceptq_added(struct sock *sk)
+{
+	sk->sk_ack_backlog++;
+}
+
+static inline int sk_acceptq_is_full(struct sock *sk)
+{
+	return sk->sk_ack_backlog > sk->sk_max_ack_backlog;
+}
+
+/*
+ * Compute minimal free write space needed to queue new packets.
+ */
+static inline int sk_stream_min_wspace(struct sock *sk)
+{
+	return sk->sk_wmem_queued / 2;
+}
+
+static inline int sk_stream_wspace(struct sock *sk)
+{
+	return sk->sk_sndbuf - sk->sk_wmem_queued;
+}
+
+extern void sk_stream_write_space(struct sock *sk);
+
+static inline int sk_stream_memory_free(struct sock *sk)
+{
+	return sk->sk_wmem_queued < sk->sk_sndbuf;
+}
+
+extern void sk_stream_rfree(struct sk_buff *skb);
+
+static inline void sk_stream_set_owner_r(struct sk_buff *skb, struct sock *sk)
+{
+	skb->sk = sk;
+	skb->destructor = sk_stream_rfree;
+	atomic_add(skb->truesize, &sk->sk_rmem_alloc);
+	sk->sk_forward_alloc -= skb->truesize;
+}
+
+static inline void sk_stream_free_skb(struct sock *sk, struct sk_buff *skb)
+{
+	sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
+	sk->sk_wmem_queued   -= skb->truesize;
+	sk->sk_forward_alloc += skb->truesize;
+	__kfree_skb(skb);
+}
+
+/* The per-socket spinlock must be held here. */
+#define sk_add_backlog(__sk, __skb)				\
+do {	if (!(__sk)->sk_backlog.tail) {				\
+		(__sk)->sk_backlog.head =			\
+		     (__sk)->sk_backlog.tail = (__skb);		\
+	} else {						\
+		((__sk)->sk_backlog.tail)->next = (__skb);	\
+		(__sk)->sk_backlog.tail = (__skb);		\
+	}							\
+	(__skb)->next = NULL;					\
+} while(0)
+
+#define sk_wait_event(__sk, __timeo, __condition)		\
+({	int rc;							\
+	release_sock(__sk);					\
+	rc = __condition;					\
+	if (!rc) {						\
+		*(__timeo) = schedule_timeout(*(__timeo));	\
+		rc = __condition;				\
+	}							\
+	lock_sock(__sk);					\
+	rc;							\
+})
+
+extern int sk_stream_wait_connect(struct sock *sk, long *timeo_p);
+extern int sk_stream_wait_memory(struct sock *sk, long *timeo_p);
+extern void sk_stream_wait_close(struct sock *sk, long timeo_p);
+extern int sk_stream_error(struct sock *sk, int flags, int err);
+extern void sk_stream_kill_queues(struct sock *sk);
+
+extern int sk_wait_data(struct sock *sk, long *timeo);
+
+/* Networking protocol blocks we attach to sockets.
+ * socket layer -> transport layer interface
+ * transport -> network interface is defined by struct inet_proto
+ */
+struct proto {
+	void			(*close)(struct sock *sk, 
+					long timeout);
+	int			(*connect)(struct sock *sk,
+				        struct sockaddr *uaddr, 
+					int addr_len);
+	int			(*disconnect)(struct sock *sk, int flags);
+
+	struct sock *		(*accept) (struct sock *sk, int flags, int *err);
+
+	int			(*ioctl)(struct sock *sk, int cmd,
+					 unsigned long arg);
+	int			(*init)(struct sock *sk);
+	int			(*destroy)(struct sock *sk);
+	void			(*shutdown)(struct sock *sk, int how);
+	int			(*setsockopt)(struct sock *sk, int level, 
+					int optname, char __user *optval,
+					int optlen);
+	int			(*getsockopt)(struct sock *sk, int level, 
+					int optname, char __user *optval, 
+					int __user *option);  	 
+	int			(*sendmsg)(struct kiocb *iocb, struct sock *sk,
+					   struct msghdr *msg, size_t len);
+	int			(*recvmsg)(struct kiocb *iocb, struct sock *sk,
+					   struct msghdr *msg,
+					size_t len, int noblock, int flags, 
+					int *addr_len);
+	int			(*sendpage)(struct sock *sk, struct page *page,
+					int offset, size_t size, int flags);
+	int			(*bind)(struct sock *sk, 
+					struct sockaddr *uaddr, int addr_len);
+
+	int			(*backlog_rcv) (struct sock *sk, 
+						struct sk_buff *skb);
+
+	/* Keeping track of sk's, looking them up, and port selection methods. */
+	void			(*hash)(struct sock *sk);
+	void			(*unhash)(struct sock *sk);
+	int			(*get_port)(struct sock *sk, unsigned short snum);
+
+	/* Memory pressure */
+	void			(*enter_memory_pressure)(void);
+	atomic_t		*memory_allocated;	/* Current allocated memory. */
+	atomic_t		*sockets_allocated;	/* Current number of sockets. */
+	/*
+	 * Pressure flag: try to collapse.
+	 * Technical note: it is used by multiple contexts non atomically.
+	 * All the sk_stream_mem_schedule() is of this nature: accounting
+	 * is strict, actions are advisory and have some latency.
+	 */
+	int			*memory_pressure;
+	int			*sysctl_mem;
+	int			*sysctl_wmem;
+	int			*sysctl_rmem;
+	int			max_header;
+
+	kmem_cache_t		*slab;
+	unsigned int		obj_size;
+
+	struct module		*owner;
+
+	char			name[32];
+
+	struct list_head	node;
+
+	struct {
+		int inuse;
+		u8  __pad[SMP_CACHE_BYTES - sizeof(int)];
+	} stats[NR_CPUS];
+};
+
+extern int proto_register(struct proto *prot, int alloc_slab);
+extern void proto_unregister(struct proto *prot);
+
+/* Called with local bh disabled */
+static __inline__ void sock_prot_inc_use(struct proto *prot)
+{
+	prot->stats[smp_processor_id()].inuse++;
+}
+
+static __inline__ void sock_prot_dec_use(struct proto *prot)
+{
+	prot->stats[smp_processor_id()].inuse--;
+}
+
+/* About 10 seconds */
+#define SOCK_DESTROY_TIME (10*HZ)
+
+/* Sockets 0-1023 can't be bound to unless you are superuser */
+#define PROT_SOCK	1024
+
+#define SHUTDOWN_MASK	3
+#define RCV_SHUTDOWN	1
+#define SEND_SHUTDOWN	2
+
+#define SOCK_SNDBUF_LOCK	1
+#define SOCK_RCVBUF_LOCK	2
+#define SOCK_BINDADDR_LOCK	4
+#define SOCK_BINDPORT_LOCK	8
+
+/* sock_iocb: used to kick off async processing of socket ios */
+struct sock_iocb {
+	struct list_head	list;
+
+	int			flags;
+	int			size;
+	struct socket		*sock;
+	struct sock		*sk;
+	struct scm_cookie	*scm;
+	struct msghdr		*msg, async_msg;
+	struct iovec		async_iov;
+	struct kiocb		*kiocb;
+};
+
+static inline struct sock_iocb *kiocb_to_siocb(struct kiocb *iocb)
+{
+	return (struct sock_iocb *)iocb->private;
+}
+
+static inline struct kiocb *siocb_to_kiocb(struct sock_iocb *si)
+{
+	return si->kiocb;
+}
+
+struct socket_alloc {
+	struct socket socket;
+	struct inode vfs_inode;
+};
+
+static inline struct socket *SOCKET_I(struct inode *inode)
+{
+	return &container_of(inode, struct socket_alloc, vfs_inode)->socket;
+}
+
+static inline struct inode *SOCK_INODE(struct socket *socket)
+{
+	return &container_of(socket, struct socket_alloc, socket)->vfs_inode;
+}
+
+extern void __sk_stream_mem_reclaim(struct sock *sk);
+extern int sk_stream_mem_schedule(struct sock *sk, int size, int kind);
+
+#define SK_STREAM_MEM_QUANTUM ((int)PAGE_SIZE)
+
+static inline int sk_stream_pages(int amt)
+{
+	return (amt + SK_STREAM_MEM_QUANTUM - 1) / SK_STREAM_MEM_QUANTUM;
+}
+
+static inline void sk_stream_mem_reclaim(struct sock *sk)
+{
+	if (sk->sk_forward_alloc >= SK_STREAM_MEM_QUANTUM)
+		__sk_stream_mem_reclaim(sk);
+}
+
+static inline void sk_stream_writequeue_purge(struct sock *sk)
+{
+	struct sk_buff *skb;
+
+	while ((skb = __skb_dequeue(&sk->sk_write_queue)) != NULL)
+		sk_stream_free_skb(sk, skb);
+	sk_stream_mem_reclaim(sk);
+}
+
+static inline int sk_stream_rmem_schedule(struct sock *sk, struct sk_buff *skb)
+{
+	return (int)skb->truesize <= sk->sk_forward_alloc ||
+		sk_stream_mem_schedule(sk, skb->truesize, 1);
+}
+
+/* Used by processes to "lock" a socket state, so that
+ * interrupts and bottom half handlers won't change it
+ * from under us. It essentially blocks any incoming
+ * packets, so that we won't get any new data or any
+ * packets that change the state of the socket.
+ *
+ * While locked, BH processing will add new packets to
+ * the backlog queue.  This queue is processed by the
+ * owner of the socket lock right before it is released.
+ *
+ * Since ~2.3.5 it is also exclusive sleep lock serializing
+ * accesses from user process context.
+ */
+#define sock_owned_by_user(sk)	((sk)->sk_lock.owner)
+
+extern void FASTCALL(lock_sock(struct sock *sk));
+extern void FASTCALL(release_sock(struct sock *sk));
+
+/* BH context may only use the following locking interface. */
+#define bh_lock_sock(__sk)	spin_lock(&((__sk)->sk_lock.slock))
+#define bh_unlock_sock(__sk)	spin_unlock(&((__sk)->sk_lock.slock))
+
+extern struct sock		*sk_alloc(int family, int priority,
+					  struct proto *prot, int zero_it);
+extern void			sk_free(struct sock *sk);
+
+extern struct sk_buff		*sock_wmalloc(struct sock *sk,
+					      unsigned long size, int force,
+					      int priority);
+extern struct sk_buff		*sock_rmalloc(struct sock *sk,
+					      unsigned long size, int force,
+					      int priority);
+extern void			sock_wfree(struct sk_buff *skb);
+extern void			sock_rfree(struct sk_buff *skb);
+
+extern int			sock_setsockopt(struct socket *sock, int level,
+						int op, char __user *optval,
+						int optlen);
+
+extern int			sock_getsockopt(struct socket *sock, int level,
+						int op, char __user *optval, 
+						int __user *optlen);
+extern struct sk_buff 		*sock_alloc_send_skb(struct sock *sk,
+						     unsigned long size,
+						     int noblock,
+						     int *errcode);
+extern void *sock_kmalloc(struct sock *sk, int size, int priority);
+extern void sock_kfree_s(struct sock *sk, void *mem, int size);
+extern void sk_send_sigurg(struct sock *sk);
+
+/*
+ * Functions to fill in entries in struct proto_ops when a protocol
+ * does not implement a particular function.
+ */
+extern int                      sock_no_bind(struct socket *, 
+					     struct sockaddr *, int);
+extern int                      sock_no_connect(struct socket *,
+						struct sockaddr *, int, int);
+extern int                      sock_no_socketpair(struct socket *,
+						   struct socket *);
+extern int                      sock_no_accept(struct socket *,
+					       struct socket *, int);
+extern int                      sock_no_getname(struct socket *,
+						struct sockaddr *, int *, int);
+extern unsigned int             sock_no_poll(struct file *, struct socket *,
+					     struct poll_table_struct *);
+extern int                      sock_no_ioctl(struct socket *, unsigned int,
+					      unsigned long);
+extern int			sock_no_listen(struct socket *, int);
+extern int                      sock_no_shutdown(struct socket *, int);
+extern int			sock_no_getsockopt(struct socket *, int , int,
+						   char __user *, int __user *);
+extern int			sock_no_setsockopt(struct socket *, int, int,
+						   char __user *, int);
+extern int                      sock_no_sendmsg(struct kiocb *, struct socket *,
+						struct msghdr *, size_t);
+extern int                      sock_no_recvmsg(struct kiocb *, struct socket *,
+						struct msghdr *, size_t, int);
+extern int			sock_no_mmap(struct file *file,
+					     struct socket *sock,
+					     struct vm_area_struct *vma);
+extern ssize_t			sock_no_sendpage(struct socket *sock,
+						struct page *page,
+						int offset, size_t size, 
+						int flags);
+
+/*
+ * Functions to fill in entries in struct proto_ops when a protocol
+ * uses the inet style.
+ */
+extern int sock_common_getsockopt(struct socket *sock, int level, int optname,
+				  char __user *optval, int __user *optlen);
+extern int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
+			       struct msghdr *msg, size_t size, int flags);
+extern int sock_common_setsockopt(struct socket *sock, int level, int optname,
+				  char __user *optval, int optlen);
+
+extern void sk_common_release(struct sock *sk);
+
+/*
+ *	Default socket callbacks and setup code
+ */
+ 
+/* Initialise core socket variables */
+extern void sock_init_data(struct socket *sock, struct sock *sk);
+
+/**
+ *	sk_filter - run a packet through a socket filter
+ *	@sk: sock associated with &sk_buff
+ *	@skb: buffer to filter
+ *	@needlock: set to 1 if the sock is not locked by caller.
+ *
+ * Run the filter code and then cut skb->data to correct size returned by
+ * sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller
+ * than pkt_len we keep whole skb->data. This is the socket level
+ * wrapper to sk_run_filter. It returns 0 if the packet should
+ * be accepted or -EPERM if the packet should be tossed.
+ *
+ */
+
+static inline int sk_filter(struct sock *sk, struct sk_buff *skb, int needlock)
+{
+	int err;
+	
+	err = security_sock_rcv_skb(sk, skb);
+	if (err)
+		return err;
+	
+	if (sk->sk_filter) {
+		struct sk_filter *filter;
+		
+		if (needlock)
+			bh_lock_sock(sk);
+		
+		filter = sk->sk_filter;
+		if (filter) {
+			int pkt_len = sk_run_filter(skb, filter->insns,
+						    filter->len);
+			if (!pkt_len)
+				err = -EPERM;
+			else
+				skb_trim(skb, pkt_len);
+		}
+
+		if (needlock)
+			bh_unlock_sock(sk);
+	}
+	return err;
+}
+
+/**
+ *	sk_filter_release: Release a socket filter
+ *	@sk: socket
+ *	@fp: filter to remove
+ *
+ *	Remove a filter from a socket and release its resources.
+ */
+ 
+static inline void sk_filter_release(struct sock *sk, struct sk_filter *fp)
+{
+	unsigned int size = sk_filter_len(fp);
+
+	atomic_sub(size, &sk->sk_omem_alloc);
+
+	if (atomic_dec_and_test(&fp->refcnt))
+		kfree(fp);
+}
+
+static inline void sk_filter_charge(struct sock *sk, struct sk_filter *fp)
+{
+	atomic_inc(&fp->refcnt);
+	atomic_add(sk_filter_len(fp), &sk->sk_omem_alloc);
+}
+
+/*
+ * Socket reference counting postulates.
+ *
+ * * Each user of socket SHOULD hold a reference count.
+ * * Each access point to socket (an hash table bucket, reference from a list,
+ *   running timer, skb in flight MUST hold a reference count.
+ * * When reference count hits 0, it means it will never increase back.
+ * * When reference count hits 0, it means that no references from
+ *   outside exist to this socket and current process on current CPU
+ *   is last user and may/should destroy this socket.
+ * * sk_free is called from any context: process, BH, IRQ. When
+ *   it is called, socket has no references from outside -> sk_free
+ *   may release descendant resources allocated by the socket, but
+ *   to the time when it is called, socket is NOT referenced by any
+ *   hash tables, lists etc.
+ * * Packets, delivered from outside (from network or from another process)
+ *   and enqueued on receive/error queues SHOULD NOT grab reference count,
+ *   when they sit in queue. Otherwise, packets will leak to hole, when
+ *   socket is looked up by one cpu and unhasing is made by another CPU.
+ *   It is true for udp/raw, netlink (leak to receive and error queues), tcp
+ *   (leak to backlog). Packet socket does all the processing inside
+ *   BR_NETPROTO_LOCK, so that it has not this race condition. UNIX sockets
+ *   use separate SMP lock, so that they are prone too.
+ */
+
+/* Ungrab socket and destroy it, if it was the last reference. */
+static inline void sock_put(struct sock *sk)
+{
+	if (atomic_dec_and_test(&sk->sk_refcnt))
+		sk_free(sk);
+}
+
+/* Detach socket from process context.
+ * Announce socket dead, detach it from wait queue and inode.
+ * Note that parent inode held reference count on this struct sock,
+ * we do not release it in this function, because protocol
+ * probably wants some additional cleanups or even continuing
+ * to work with this socket (TCP).
+ */
+static inline void sock_orphan(struct sock *sk)
+{
+	write_lock_bh(&sk->sk_callback_lock);
+	sock_set_flag(sk, SOCK_DEAD);
+	sk->sk_socket = NULL;
+	sk->sk_sleep  = NULL;
+	write_unlock_bh(&sk->sk_callback_lock);
+}
+
+static inline void sock_graft(struct sock *sk, struct socket *parent)
+{
+	write_lock_bh(&sk->sk_callback_lock);
+	sk->sk_sleep = &parent->wait;
+	parent->sk = sk;
+	sk->sk_socket = parent;
+	write_unlock_bh(&sk->sk_callback_lock);
+}
+
+extern int sock_i_uid(struct sock *sk);
+extern unsigned long sock_i_ino(struct sock *sk);
+
+static inline struct dst_entry *
+__sk_dst_get(struct sock *sk)
+{
+	return sk->sk_dst_cache;
+}
+
+static inline struct dst_entry *
+sk_dst_get(struct sock *sk)
+{
+	struct dst_entry *dst;
+
+	read_lock(&sk->sk_dst_lock);
+	dst = sk->sk_dst_cache;
+	if (dst)
+		dst_hold(dst);
+	read_unlock(&sk->sk_dst_lock);
+	return dst;
+}
+
+static inline void
+__sk_dst_set(struct sock *sk, struct dst_entry *dst)
+{
+	struct dst_entry *old_dst;
+
+	old_dst = sk->sk_dst_cache;
+	sk->sk_dst_cache = dst;
+	dst_release(old_dst);
+}
+
+static inline void
+sk_dst_set(struct sock *sk, struct dst_entry *dst)
+{
+	write_lock(&sk->sk_dst_lock);
+	__sk_dst_set(sk, dst);
+	write_unlock(&sk->sk_dst_lock);
+}
+
+static inline void
+__sk_dst_reset(struct sock *sk)
+{
+	struct dst_entry *old_dst;
+
+	old_dst = sk->sk_dst_cache;
+	sk->sk_dst_cache = NULL;
+	dst_release(old_dst);
+}
+
+static inline void
+sk_dst_reset(struct sock *sk)
+{
+	write_lock(&sk->sk_dst_lock);
+	__sk_dst_reset(sk);
+	write_unlock(&sk->sk_dst_lock);
+}
+
+static inline struct dst_entry *
+__sk_dst_check(struct sock *sk, u32 cookie)
+{
+	struct dst_entry *dst = sk->sk_dst_cache;
+
+	if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+		sk->sk_dst_cache = NULL;
+		dst_release(dst);
+		return NULL;
+	}
+
+	return dst;
+}
+
+static inline struct dst_entry *
+sk_dst_check(struct sock *sk, u32 cookie)
+{
+	struct dst_entry *dst = sk_dst_get(sk);
+
+	if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+		sk_dst_reset(sk);
+		dst_release(dst);
+		return NULL;
+	}
+
+	return dst;
+}
+
+static inline void sk_charge_skb(struct sock *sk, struct sk_buff *skb)
+{
+	sk->sk_wmem_queued   += skb->truesize;
+	sk->sk_forward_alloc -= skb->truesize;
+}
+
+static inline int skb_copy_to_page(struct sock *sk, char __user *from,
+				   struct sk_buff *skb, struct page *page,
+				   int off, int copy)
+{
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		unsigned int csum = csum_and_copy_from_user(from,
+						     page_address(page) + off,
+							    copy, 0, &err);
+		if (err)
+			return err;
+		skb->csum = csum_block_add(skb->csum, csum, skb->len);
+	} else if (copy_from_user(page_address(page) + off, from, copy))
+		return -EFAULT;
+
+	skb->len	     += copy;
+	skb->data_len	     += copy;
+	skb->truesize	     += copy;
+	sk->sk_wmem_queued   += copy;
+	sk->sk_forward_alloc -= copy;
+	return 0;
+}
+
+/*
+ * 	Queue a received datagram if it will fit. Stream and sequenced
+ *	protocols can't normally use this as they need to fit buffers in
+ *	and play with them.
+ *
+ * 	Inlined as it's very short and called for pretty much every
+ *	packet ever received.
+ */
+
+static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+	sock_hold(sk);
+	skb->sk = sk;
+	skb->destructor = sock_wfree;
+	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
+}
+
+static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
+{
+	skb->sk = sk;
+	skb->destructor = sock_rfree;
+	atomic_add(skb->truesize, &sk->sk_rmem_alloc);
+}
+
+extern void sk_reset_timer(struct sock *sk, struct timer_list* timer,
+			   unsigned long expires);
+
+extern void sk_stop_timer(struct sock *sk, struct timer_list* timer);
+
+static inline int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	int err = 0;
+	int skb_len;
+
+	/* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
+	   number of warnings when compiling with -W --ANK
+	 */
+	if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
+	    (unsigned)sk->sk_rcvbuf) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	/* It would be deadlock, if sock_queue_rcv_skb is used
+	   with socket lock! We assume that users of this
+	   function are lock free.
+	*/
+	err = sk_filter(sk, skb, 1);
+	if (err)
+		goto out;
+
+	skb->dev = NULL;
+	skb_set_owner_r(skb, sk);
+
+	/* Cache the SKB length before we tack it onto the receive
+	 * queue.  Once it is added it no longer belongs to us and
+	 * may be freed by other threads of control pulling packets
+	 * from the queue.
+	 */
+	skb_len = skb->len;
+
+	skb_queue_tail(&sk->sk_receive_queue, skb);
+
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk->sk_data_ready(sk, skb_len);
+out:
+	return err;
+}
+
+static inline int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb)
+{
+	/* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
+	   number of warnings when compiling with -W --ANK
+	 */
+	if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
+	    (unsigned)sk->sk_rcvbuf)
+		return -ENOMEM;
+	skb_set_owner_r(skb, sk);
+	skb_queue_tail(&sk->sk_error_queue, skb);
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk->sk_data_ready(sk, skb->len);
+	return 0;
+}
+
+/*
+ *	Recover an error report and clear atomically
+ */
+ 
+static inline int sock_error(struct sock *sk)
+{
+	int err = xchg(&sk->sk_err, 0);
+	return -err;
+}
+
+static inline unsigned long sock_wspace(struct sock *sk)
+{
+	int amt = 0;
+
+	if (!(sk->sk_shutdown & SEND_SHUTDOWN)) {
+		amt = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		if (amt < 0) 
+			amt = 0;
+	}
+	return amt;
+}
+
+static inline void sk_wake_async(struct sock *sk, int how, int band)
+{
+	if (sk->sk_socket && sk->sk_socket->fasync_list)
+		sock_wake_async(sk->sk_socket, how, band);
+}
+
+#define SOCK_MIN_SNDBUF 2048
+#define SOCK_MIN_RCVBUF 256
+
+static inline void sk_stream_moderate_sndbuf(struct sock *sk)
+{
+	if (!(sk->sk_userlocks & SOCK_SNDBUF_LOCK)) {
+		sk->sk_sndbuf = min(sk->sk_sndbuf, sk->sk_wmem_queued / 2);
+		sk->sk_sndbuf = max(sk->sk_sndbuf, SOCK_MIN_SNDBUF);
+	}
+}
+
+static inline struct sk_buff *sk_stream_alloc_pskb(struct sock *sk,
+						   int size, int mem, int gfp)
+{
+	struct sk_buff *skb = alloc_skb(size + sk->sk_prot->max_header, gfp);
+
+	if (skb) {
+		skb->truesize += mem;
+		if (sk->sk_forward_alloc >= (int)skb->truesize ||
+		    sk_stream_mem_schedule(sk, skb->truesize, 0)) {
+			skb_reserve(skb, sk->sk_prot->max_header);
+			return skb;
+		}
+		__kfree_skb(skb);
+	} else {
+		sk->sk_prot->enter_memory_pressure();
+		sk_stream_moderate_sndbuf(sk);
+	}
+	return NULL;
+}
+
+static inline struct sk_buff *sk_stream_alloc_skb(struct sock *sk,
+						  int size, int gfp)
+{
+	return sk_stream_alloc_pskb(sk, size, 0, gfp);
+}
+
+static inline struct page *sk_stream_alloc_page(struct sock *sk)
+{
+	struct page *page = NULL;
+
+	if (sk->sk_forward_alloc >= (int)PAGE_SIZE ||
+	    sk_stream_mem_schedule(sk, PAGE_SIZE, 0))
+		page = alloc_pages(sk->sk_allocation, 0);
+	else {
+		sk->sk_prot->enter_memory_pressure();
+		sk_stream_moderate_sndbuf(sk);
+	}
+	return page;
+}
+
+#define sk_stream_for_retrans_queue(skb, sk)				\
+		for (skb = (sk)->sk_write_queue.next;			\
+		     (skb != (sk)->sk_send_head) &&			\
+		     (skb != (struct sk_buff *)&(sk)->sk_write_queue);	\
+		     skb = skb->next)
+
+/*
+ *	Default write policy as shown to user space via poll/select/SIGIO
+ */
+static inline int sock_writeable(const struct sock *sk) 
+{
+	return atomic_read(&sk->sk_wmem_alloc) < (sk->sk_sndbuf / 2);
+}
+
+static inline int gfp_any(void)
+{
+	return in_softirq() ? GFP_ATOMIC : GFP_KERNEL;
+}
+
+static inline long sock_rcvtimeo(const struct sock *sk, int noblock)
+{
+	return noblock ? 0 : sk->sk_rcvtimeo;
+}
+
+static inline long sock_sndtimeo(const struct sock *sk, int noblock)
+{
+	return noblock ? 0 : sk->sk_sndtimeo;
+}
+
+static inline int sock_rcvlowat(const struct sock *sk, int waitall, int len)
+{
+	return (waitall ? len : min_t(int, sk->sk_rcvlowat, len)) ? : 1;
+}
+
+/* Alas, with timeout socket operations are not restartable.
+ * Compare this to poll().
+ */
+static inline int sock_intr_errno(long timeo)
+{
+	return timeo == MAX_SCHEDULE_TIMEOUT ? -ERESTARTSYS : -EINTR;
+}
+
+static __inline__ void
+sock_recv_timestamp(struct msghdr *msg, struct sock *sk, struct sk_buff *skb)
+{
+	struct timeval *stamp = &skb->stamp;
+	if (sock_flag(sk, SOCK_RCVTSTAMP)) {
+		/* Race occurred between timestamp enabling and packet
+		   receiving.  Fill in the current time for now. */
+		if (stamp->tv_sec == 0)
+			do_gettimeofday(stamp);
+		put_cmsg(msg, SOL_SOCKET, SO_TIMESTAMP, sizeof(struct timeval),
+			 stamp);
+	} else
+		sk->sk_stamp = *stamp;
+}
+
+/**
+ * sk_eat_skb - Release a skb if it is no longer needed
+ * @sk - socket to eat this skb from
+ * @skb - socket buffer to eat
+ *
+ * This routine must be called with interrupts disabled or with the socket
+ * locked so that the sk_buff queue operation is ok.
+*/
+static inline void sk_eat_skb(struct sock *sk, struct sk_buff *skb)
+{
+	__skb_unlink(skb, &sk->sk_receive_queue);
+	__kfree_skb(skb);
+}
+
+extern void sock_enable_timestamp(struct sock *sk);
+extern int sock_get_timestamp(struct sock *, struct timeval __user *);
+
+/* 
+ *	Enable debug/info messages 
+ */
+
+#if 0
+#define NETDEBUG(x)	do { } while (0)
+#define LIMIT_NETDEBUG(x) do {} while(0)
+#else
+#define NETDEBUG(x)	do { x; } while (0)
+#define LIMIT_NETDEBUG(x) do { if (net_ratelimit()) { x; } } while(0)
+#endif
+
+/*
+ * Macros for sleeping on a socket. Use them like this:
+ *
+ * SOCK_SLEEP_PRE(sk)
+ * if (condition)
+ * 	schedule();
+ * SOCK_SLEEP_POST(sk)
+ *
+ * N.B. These are now obsolete and were, afaik, only ever used in DECnet
+ * and when the last use of them in DECnet has gone, I'm intending to
+ * remove them.
+ */
+
+#define SOCK_SLEEP_PRE(sk) 	{ struct task_struct *tsk = current; \
+				DECLARE_WAITQUEUE(wait, tsk); \
+				tsk->state = TASK_INTERRUPTIBLE; \
+				add_wait_queue((sk)->sk_sleep, &wait); \
+				release_sock(sk);
+
+#define SOCK_SLEEP_POST(sk)	tsk->state = TASK_RUNNING; \
+				remove_wait_queue((sk)->sk_sleep, &wait); \
+				lock_sock(sk); \
+				}
+
+static inline void sock_valbool_flag(struct sock *sk, int bit, int valbool)
+{
+	if (valbool)
+		sock_set_flag(sk, bit);
+	else
+		sock_reset_flag(sk, bit);
+}
+
+extern __u32 sysctl_wmem_max;
+extern __u32 sysctl_rmem_max;
+
+#ifdef CONFIG_NET
+int siocdevprivate_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg);
+#else
+static inline int siocdevprivate_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif	/* _SOCK_H */
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
new file mode 100644
index 000000000000..614cb6ba564e
--- /dev/null
+++ b/include/net/syncppp.h
@@ -0,0 +1,105 @@
+/*
+ * Defines for synchronous PPP/Cisco link level subroutines.
+ *
+ * Copyright (C) 1994 Cronyx Ltd.
+ * Author: Serge Vakulenko, <vak@zebub.msk.su>
+ *
+ * This software is distributed with NO WARRANTIES, not even the implied
+ * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Authors grant any other persons or organizations permission to use
+ * or modify this software as long as this message is kept with the software,
+ * all derivative works or modified versions.
+ *
+ * Version 1.7, Wed Jun  7 22:12:02 MSD 1995
+ *
+ *
+ *
+ */
+
+#ifndef _SYNCPPP_H_
+#define _SYNCPPP_H_ 1
+
+#ifdef __KERNEL__
+struct slcp {
+	u16	state;          /* state machine */
+	u32	magic;          /* local magic number */
+	u_char	echoid;         /* id of last keepalive echo request */
+	u_char	confid;         /* id of last configuration request */
+};
+
+struct sipcp {
+	u16	state;          /* state machine */
+	u_char  confid;         /* id of last configuration request */
+};
+
+struct sppp 
+{
+	struct sppp *	pp_next;	/* next interface in keepalive list */
+	u32		pp_flags;	/* use Cisco protocol instead of PPP */
+	u16		pp_alivecnt;	/* keepalive packets counter */
+	u16		pp_loopcnt;	/* loopback detection counter */
+	u32		pp_seq;		/* local sequence number */
+	u32		pp_rseq;	/* remote sequence number */
+	struct slcp	lcp;		/* LCP params */
+	struct sipcp	ipcp;		/* IPCP params */
+	u32		ibytes,obytes;	/* Bytes in/out */
+	u32		ipkts,opkts;	/* Packets in/out */
+	struct timer_list	pp_timer;
+	struct net_device	*pp_if;
+	char		pp_link_state;	/* Link status */
+	spinlock_t      lock;
+};
+
+struct ppp_device
+{	
+	struct net_device *dev;	/* Network device pointer */
+	struct sppp sppp;	/* Synchronous PPP */
+};
+
+static inline struct sppp *sppp_of(struct net_device *dev) 
+{
+	struct ppp_device **ppp = dev->priv;
+	BUG_ON((*ppp)->dev != dev);
+	return &(*ppp)->sppp;
+}
+
+#define PP_KEEPALIVE    0x01    /* use keepalive protocol */
+#define PP_CISCO        0x02    /* use Cisco protocol instead of PPP */
+#define PP_TIMO         0x04    /* cp_timeout routine active */
+#define PP_DEBUG	0x08
+
+#define PPP_MTU          1500    /* max. transmit unit */
+
+#define LCP_STATE_CLOSED        0       /* LCP state: closed (conf-req sent) */
+#define LCP_STATE_ACK_RCVD      1       /* LCP state: conf-ack received */
+#define LCP_STATE_ACK_SENT      2       /* LCP state: conf-ack sent */
+#define LCP_STATE_OPENED        3       /* LCP state: opened */
+
+#define IPCP_STATE_CLOSED       0       /* IPCP state: closed (conf-req sent) */
+#define IPCP_STATE_ACK_RCVD     1       /* IPCP state: conf-ack received */
+#define IPCP_STATE_ACK_SENT     2       /* IPCP state: conf-ack sent */
+#define IPCP_STATE_OPENED       3       /* IPCP state: opened */
+
+#define SPPP_LINK_DOWN		0	/* link down - no keepalive */
+#define SPPP_LINK_UP		1	/* link is up - keepalive ok */
+
+void sppp_attach (struct ppp_device *pd);
+void sppp_detach (struct net_device *dev);
+void sppp_input (struct net_device *dev, struct sk_buff *m);
+int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd);
+struct sk_buff *sppp_dequeue (struct net_device *dev);
+int sppp_isempty (struct net_device *dev);
+void sppp_flush (struct net_device *dev);
+int sppp_open (struct net_device *dev);
+int sppp_reopen (struct net_device *dev);
+int sppp_close (struct net_device *dev);
+#endif
+
+#define SPPPIOCCISCO	(SIOCDEVPRIVATE)
+#define SPPPIOCPPP	(SIOCDEVPRIVATE+1)
+#define SPPPIOCDEBUG	(SIOCDEVPRIVATE+2)
+#define SPPPIOCSFLAGS	(SIOCDEVPRIVATE+3)
+#define SPPPIOCGFLAGS	(SIOCDEVPRIVATE+4)
+
+#endif /* _SYNCPPP_H_ */
diff --git a/include/net/tc_act/tc_gact.h b/include/net/tc_act/tc_gact.h
new file mode 100644
index 000000000000..59f0d9628ad1
--- /dev/null
+++ b/include/net/tc_act/tc_gact.h
@@ -0,0 +1,17 @@
+#ifndef __NET_TC_GACT_H
+#define __NET_TC_GACT_H
+
+#include <net/act_api.h>
+
+struct tcf_gact
+{
+        tca_gen(gact);
+#ifdef CONFIG_GACT_PROB
+        u16                 ptype;
+        u16                 pval;
+        int                 paction;
+#endif
+                                                                                
+};
+                                                                                
+#endif
diff --git a/include/net/tc_act/tc_ipt.h b/include/net/tc_act/tc_ipt.h
new file mode 100644
index 000000000000..02eccebd55ae
--- /dev/null
+++ b/include/net/tc_act/tc_ipt.h
@@ -0,0 +1,16 @@
+#ifndef __NET_TC_IPT_H
+#define __NET_TC_IPT_H
+
+#include <net/act_api.h>
+
+struct ipt_entry_target;
+
+struct tcf_ipt
+{
+	tca_gen(ipt);
+	u32 hook;
+	char *tname;
+	struct ipt_entry_target *t;
+};
+
+#endif
diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
new file mode 100644
index 000000000000..b5c32f65c12c
--- /dev/null
+++ b/include/net/tc_act/tc_mirred.h
@@ -0,0 +1,15 @@
+#ifndef __NET_TC_MIR_H
+#define __NET_TC_MIR_H
+
+#include <net/act_api.h>
+
+struct tcf_mirred
+{
+	tca_gen(mirred);
+	int eaction;
+	int ifindex;
+	int ok_push;
+	struct net_device *dev;
+};
+
+#endif
diff --git a/include/net/tc_act/tc_pedit.h b/include/net/tc_act/tc_pedit.h
new file mode 100644
index 000000000000..eb21689d759d
--- /dev/null
+++ b/include/net/tc_act/tc_pedit.h
@@ -0,0 +1,14 @@
+#ifndef __NET_TC_PED_H
+#define __NET_TC_PED_H
+
+#include <net/act_api.h>
+
+struct tcf_pedit
+{
+	tca_gen(pedit);
+	unsigned char           nkeys;
+	unsigned char           flags;
+	struct tc_pedit_key     *keys;
+};
+
+#endif
diff --git a/include/net/tcp.h b/include/net/tcp.h
new file mode 100644
index 000000000000..503810a70e21
--- /dev/null
+++ b/include/net/tcp.h
@@ -0,0 +1,2022 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP module.
+ *
+ * Version:	@(#)tcp.h	1.0.5	05/23/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _TCP_H
+#define _TCP_H
+
+#define TCP_DEBUG 1
+#define FASTRETRANS_DEBUG 1
+
+/* Cancel timers, when they are not required. */
+#undef TCP_CLEAR_TIMERS
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/tcp.h>
+#include <linux/slab.h>
+#include <linux/cache.h>
+#include <linux/percpu.h>
+#include <net/checksum.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <net/ip.h>
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+#include <linux/ipv6.h>
+#endif
+#include <linux/seq_file.h>
+
+/* This is for all connections with a full identity, no wildcards.
+ * New scheme, half the table is for TIME_WAIT, the other half is
+ * for the rest.  I'll experiment with dynamic table growth later.
+ */
+struct tcp_ehash_bucket {
+	rwlock_t	  lock;
+	struct hlist_head chain;
+} __attribute__((__aligned__(8)));
+
+/* This is for listening sockets, thus all sockets which possess wildcards. */
+#define TCP_LHTABLE_SIZE	32	/* Yes, really, this is all you need. */
+
+/* There are a few simple rules, which allow for local port reuse by
+ * an application.  In essence:
+ *
+ *	1) Sockets bound to different interfaces may share a local port.
+ *	   Failing that, goto test 2.
+ *	2) If all sockets have sk->sk_reuse set, and none of them are in
+ *	   TCP_LISTEN state, the port may be shared.
+ *	   Failing that, goto test 3.
+ *	3) If all sockets are bound to a specific inet_sk(sk)->rcv_saddr local
+ *	   address, and none of them are the same, the port may be
+ *	   shared.
+ *	   Failing this, the port cannot be shared.
+ *
+ * The interesting point, is test #2.  This is what an FTP server does
+ * all day.  To optimize this case we use a specific flag bit defined
+ * below.  As we add sockets to a bind bucket list, we perform a
+ * check of: (newsk->sk_reuse && (newsk->sk_state != TCP_LISTEN))
+ * As long as all sockets added to a bind bucket pass this test,
+ * the flag bit will be set.
+ * The resulting situation is that tcp_v[46]_verify_bind() can just check
+ * for this flag bit, if it is set and the socket trying to bind has
+ * sk->sk_reuse set, we don't even have to walk the owners list at all,
+ * we return that it is ok to bind this socket to the requested local port.
+ *
+ * Sounds like a lot of work, but it is worth it.  In a more naive
+ * implementation (ie. current FreeBSD etc.) the entire list of ports
+ * must be walked for each data port opened by an ftp server.  Needless
+ * to say, this does not scale at all.  With a couple thousand FTP
+ * users logged onto your box, isn't it nice to know that new data
+ * ports are created in O(1) time?  I thought so. ;-)	-DaveM
+ */
+struct tcp_bind_bucket {
+	unsigned short		port;
+	signed short		fastreuse;
+	struct hlist_node	node;
+	struct hlist_head	owners;
+};
+
+#define tb_for_each(tb, node, head) hlist_for_each_entry(tb, node, head, node)
+
+struct tcp_bind_hashbucket {
+	spinlock_t		lock;
+	struct hlist_head	chain;
+};
+
+static inline struct tcp_bind_bucket *__tb_head(struct tcp_bind_hashbucket *head)
+{
+	return hlist_entry(head->chain.first, struct tcp_bind_bucket, node);
+}
+
+static inline struct tcp_bind_bucket *tb_head(struct tcp_bind_hashbucket *head)
+{
+	return hlist_empty(&head->chain) ? NULL : __tb_head(head);
+}
+
+extern struct tcp_hashinfo {
+	/* This is for sockets with full identity only.  Sockets here will
+	 * always be without wildcards and will have the following invariant:
+	 *
+	 *          TCP_ESTABLISHED <= sk->sk_state < TCP_CLOSE
+	 *
+	 * First half of the table is for sockets not in TIME_WAIT, second half
+	 * is for TIME_WAIT sockets only.
+	 */
+	struct tcp_ehash_bucket *__tcp_ehash;
+
+	/* Ok, let's try this, I give up, we do need a local binding
+	 * TCP hash as well as the others for fast bind/connect.
+	 */
+	struct tcp_bind_hashbucket *__tcp_bhash;
+
+	int __tcp_bhash_size;
+	int __tcp_ehash_size;
+
+	/* All sockets in TCP_LISTEN state will be in here.  This is the only
+	 * table where wildcard'd TCP sockets can exist.  Hash function here
+	 * is just local port number.
+	 */
+	struct hlist_head __tcp_listening_hash[TCP_LHTABLE_SIZE];
+
+	/* All the above members are written once at bootup and
+	 * never written again _or_ are predominantly read-access.
+	 *
+	 * Now align to a new cache line as all the following members
+	 * are often dirty.
+	 */
+	rwlock_t __tcp_lhash_lock ____cacheline_aligned;
+	atomic_t __tcp_lhash_users;
+	wait_queue_head_t __tcp_lhash_wait;
+	spinlock_t __tcp_portalloc_lock;
+} tcp_hashinfo;
+
+#define tcp_ehash	(tcp_hashinfo.__tcp_ehash)
+#define tcp_bhash	(tcp_hashinfo.__tcp_bhash)
+#define tcp_ehash_size	(tcp_hashinfo.__tcp_ehash_size)
+#define tcp_bhash_size	(tcp_hashinfo.__tcp_bhash_size)
+#define tcp_listening_hash (tcp_hashinfo.__tcp_listening_hash)
+#define tcp_lhash_lock	(tcp_hashinfo.__tcp_lhash_lock)
+#define tcp_lhash_users	(tcp_hashinfo.__tcp_lhash_users)
+#define tcp_lhash_wait	(tcp_hashinfo.__tcp_lhash_wait)
+#define tcp_portalloc_lock (tcp_hashinfo.__tcp_portalloc_lock)
+
+extern kmem_cache_t *tcp_bucket_cachep;
+extern struct tcp_bind_bucket *tcp_bucket_create(struct tcp_bind_hashbucket *head,
+						 unsigned short snum);
+extern void tcp_bucket_destroy(struct tcp_bind_bucket *tb);
+extern void tcp_bucket_unlock(struct sock *sk);
+extern int tcp_port_rover;
+
+/* These are AF independent. */
+static __inline__ int tcp_bhashfn(__u16 lport)
+{
+	return (lport & (tcp_bhash_size - 1));
+}
+
+extern void tcp_bind_hash(struct sock *sk, struct tcp_bind_bucket *tb,
+			  unsigned short snum);
+
+#if (BITS_PER_LONG == 64)
+#define TCP_ADDRCMP_ALIGN_BYTES 8
+#else
+#define TCP_ADDRCMP_ALIGN_BYTES 4
+#endif
+
+/* This is a TIME_WAIT bucket.  It works around the memory consumption
+ * problems of sockets in such a state on heavily loaded servers, but
+ * without violating the protocol specification.
+ */
+struct tcp_tw_bucket {
+	/*
+	 * Now struct sock also uses sock_common, so please just
+	 * don't add nothing before this first member (__tw_common) --acme
+	 */
+	struct sock_common	__tw_common;
+#define tw_family		__tw_common.skc_family
+#define tw_state		__tw_common.skc_state
+#define tw_reuse		__tw_common.skc_reuse
+#define tw_bound_dev_if		__tw_common.skc_bound_dev_if
+#define tw_node			__tw_common.skc_node
+#define tw_bind_node		__tw_common.skc_bind_node
+#define tw_refcnt		__tw_common.skc_refcnt
+	volatile unsigned char	tw_substate;
+	unsigned char		tw_rcv_wscale;
+	__u16			tw_sport;
+	/* Socket demultiplex comparisons on incoming packets. */
+	/* these five are in inet_sock */
+	__u32			tw_daddr
+		__attribute__((aligned(TCP_ADDRCMP_ALIGN_BYTES)));
+	__u32			tw_rcv_saddr;
+	__u16			tw_dport;
+	__u16			tw_num;
+	/* And these are ours. */
+	int			tw_hashent;
+	int			tw_timeout;
+	__u32			tw_rcv_nxt;
+	__u32			tw_snd_nxt;
+	__u32			tw_rcv_wnd;
+	__u32			tw_ts_recent;
+	long			tw_ts_recent_stamp;
+	unsigned long		tw_ttd;
+	struct tcp_bind_bucket	*tw_tb;
+	struct hlist_node	tw_death_node;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	struct in6_addr		tw_v6_daddr;
+	struct in6_addr		tw_v6_rcv_saddr;
+	int			tw_v6_ipv6only;
+#endif
+};
+
+static __inline__ void tw_add_node(struct tcp_tw_bucket *tw,
+				   struct hlist_head *list)
+{
+	hlist_add_head(&tw->tw_node, list);
+}
+
+static __inline__ void tw_add_bind_node(struct tcp_tw_bucket *tw,
+					struct hlist_head *list)
+{
+	hlist_add_head(&tw->tw_bind_node, list);
+}
+
+static inline int tw_dead_hashed(struct tcp_tw_bucket *tw)
+{
+	return tw->tw_death_node.pprev != NULL;
+}
+
+static __inline__ void tw_dead_node_init(struct tcp_tw_bucket *tw)
+{
+	tw->tw_death_node.pprev = NULL;
+}
+
+static __inline__ void __tw_del_dead_node(struct tcp_tw_bucket *tw)
+{
+	__hlist_del(&tw->tw_death_node);
+	tw_dead_node_init(tw);
+}
+
+static __inline__ int tw_del_dead_node(struct tcp_tw_bucket *tw)
+{
+	if (tw_dead_hashed(tw)) {
+		__tw_del_dead_node(tw);
+		return 1;
+	}
+	return 0;
+}
+
+#define tw_for_each(tw, node, head) \
+	hlist_for_each_entry(tw, node, head, tw_node)
+
+#define tw_for_each_inmate(tw, node, jail) \
+	hlist_for_each_entry(tw, node, jail, tw_death_node)
+
+#define tw_for_each_inmate_safe(tw, node, safe, jail) \
+	hlist_for_each_entry_safe(tw, node, safe, jail, tw_death_node)
+
+#define tcptw_sk(__sk)	((struct tcp_tw_bucket *)(__sk))
+
+static inline u32 tcp_v4_rcv_saddr(const struct sock *sk)
+{
+	return likely(sk->sk_state != TCP_TIME_WAIT) ?
+		inet_sk(sk)->rcv_saddr : tcptw_sk(sk)->tw_rcv_saddr;
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static inline struct in6_addr *__tcp_v6_rcv_saddr(const struct sock *sk)
+{
+	return likely(sk->sk_state != TCP_TIME_WAIT) ?
+		&inet6_sk(sk)->rcv_saddr : &tcptw_sk(sk)->tw_v6_rcv_saddr;
+}
+
+static inline struct in6_addr *tcp_v6_rcv_saddr(const struct sock *sk)
+{
+	return sk->sk_family == AF_INET6 ? __tcp_v6_rcv_saddr(sk) : NULL;
+}
+
+#define tcptw_sk_ipv6only(__sk)	(tcptw_sk(__sk)->tw_v6_ipv6only)
+
+static inline int tcp_v6_ipv6only(const struct sock *sk)
+{
+	return likely(sk->sk_state != TCP_TIME_WAIT) ?
+		ipv6_only_sock(sk) : tcptw_sk_ipv6only(sk);
+}
+#else
+# define __tcp_v6_rcv_saddr(__sk)	NULL
+# define tcp_v6_rcv_saddr(__sk)		NULL
+# define tcptw_sk_ipv6only(__sk)	0
+# define tcp_v6_ipv6only(__sk)		0
+#endif
+
+extern kmem_cache_t *tcp_timewait_cachep;
+
+static inline void tcp_tw_put(struct tcp_tw_bucket *tw)
+{
+	if (atomic_dec_and_test(&tw->tw_refcnt)) {
+#ifdef INET_REFCNT_DEBUG
+		printk(KERN_DEBUG "tw_bucket %p released\n", tw);
+#endif
+		kmem_cache_free(tcp_timewait_cachep, tw);
+	}
+}
+
+extern atomic_t tcp_orphan_count;
+extern int tcp_tw_count;
+extern void tcp_time_wait(struct sock *sk, int state, int timeo);
+extern void tcp_tw_deschedule(struct tcp_tw_bucket *tw);
+
+
+/* Socket demux engine toys. */
+#ifdef __BIG_ENDIAN
+#define TCP_COMBINED_PORTS(__sport, __dport) \
+	(((__u32)(__sport)<<16) | (__u32)(__dport))
+#else /* __LITTLE_ENDIAN */
+#define TCP_COMBINED_PORTS(__sport, __dport) \
+	(((__u32)(__dport)<<16) | (__u32)(__sport))
+#endif
+
+#if (BITS_PER_LONG == 64)
+#ifdef __BIG_ENDIAN
+#define TCP_V4_ADDR_COOKIE(__name, __saddr, __daddr) \
+	__u64 __name = (((__u64)(__saddr))<<32)|((__u64)(__daddr));
+#else /* __LITTLE_ENDIAN */
+#define TCP_V4_ADDR_COOKIE(__name, __saddr, __daddr) \
+	__u64 __name = (((__u64)(__daddr))<<32)|((__u64)(__saddr));
+#endif /* __BIG_ENDIAN */
+#define TCP_IPV4_MATCH(__sk, __cookie, __saddr, __daddr, __ports, __dif)\
+	(((*((__u64 *)&(inet_sk(__sk)->daddr)))== (__cookie))	&&	\
+	 ((*((__u32 *)&(inet_sk(__sk)->dport)))== (__ports))	&&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#define TCP_IPV4_TW_MATCH(__sk, __cookie, __saddr, __daddr, __ports, __dif)\
+	(((*((__u64 *)&(tcptw_sk(__sk)->tw_daddr))) == (__cookie)) &&	\
+	 ((*((__u32 *)&(tcptw_sk(__sk)->tw_dport))) == (__ports)) &&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#else /* 32-bit arch */
+#define TCP_V4_ADDR_COOKIE(__name, __saddr, __daddr)
+#define TCP_IPV4_MATCH(__sk, __cookie, __saddr, __daddr, __ports, __dif)\
+	((inet_sk(__sk)->daddr			== (__saddr))	&&	\
+	 (inet_sk(__sk)->rcv_saddr		== (__daddr))	&&	\
+	 ((*((__u32 *)&(inet_sk(__sk)->dport)))== (__ports))	&&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#define TCP_IPV4_TW_MATCH(__sk, __cookie, __saddr, __daddr, __ports, __dif)\
+	((tcptw_sk(__sk)->tw_daddr		== (__saddr))	&&	\
+	 (tcptw_sk(__sk)->tw_rcv_saddr		== (__daddr))	&&	\
+	 ((*((__u32 *)&(tcptw_sk(__sk)->tw_dport))) == (__ports)) &&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#endif /* 64-bit arch */
+
+#define TCP_IPV6_MATCH(__sk, __saddr, __daddr, __ports, __dif)	   \
+	(((*((__u32 *)&(inet_sk(__sk)->dport)))== (__ports))   	&& \
+	 ((__sk)->sk_family		== AF_INET6)		&& \
+	 ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr))	&& \
+	 ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr))	&& \
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+
+/* These can have wildcards, don't try too hard. */
+static __inline__ int tcp_lhashfn(unsigned short num)
+{
+	return num & (TCP_LHTABLE_SIZE - 1);
+}
+
+static __inline__ int tcp_sk_listen_hashfn(struct sock *sk)
+{
+	return tcp_lhashfn(inet_sk(sk)->num);
+}
+
+#define MAX_TCP_HEADER	(128 + MAX_HEADER)
+
+/* 
+ * Never offer a window over 32767 without using window scaling. Some
+ * poor stacks do signed 16bit maths! 
+ */
+#define MAX_TCP_WINDOW		32767U
+
+/* Minimal accepted MSS. It is (60+60+8) - (20+20). */
+#define TCP_MIN_MSS		88U
+
+/* Minimal RCV_MSS. */
+#define TCP_MIN_RCVMSS		536U
+
+/* After receiving this amount of duplicate ACKs fast retransmit starts. */
+#define TCP_FASTRETRANS_THRESH 3
+
+/* Maximal reordering. */
+#define TCP_MAX_REORDERING	127
+
+/* Maximal number of ACKs sent quickly to accelerate slow-start. */
+#define TCP_MAX_QUICKACKS	16U
+
+/* urg_data states */
+#define TCP_URG_VALID	0x0100
+#define TCP_URG_NOTYET	0x0200
+#define TCP_URG_READ	0x0400
+
+#define TCP_RETR1	3	/*
+				 * This is how many retries it does before it
+				 * tries to figure out if the gateway is
+				 * down. Minimal RFC value is 3; it corresponds
+				 * to ~3sec-8min depending on RTO.
+				 */
+
+#define TCP_RETR2	15	/*
+				 * This should take at least
+				 * 90 minutes to time out.
+				 * RFC1122 says that the limit is 100 sec.
+				 * 15 is ~13-30min depending on RTO.
+				 */
+
+#define TCP_SYN_RETRIES	 5	/* number of times to retry active opening a
+				 * connection: ~180sec is RFC minumum	*/
+
+#define TCP_SYNACK_RETRIES 5	/* number of times to retry passive opening a
+				 * connection: ~180sec is RFC minumum	*/
+
+
+#define TCP_ORPHAN_RETRIES 7	/* number of times to retry on an orphaned
+				 * socket. 7 is ~50sec-16min.
+				 */
+
+
+#define TCP_TIMEWAIT_LEN (60*HZ) /* how long to wait to destroy TIME-WAIT
+				  * state, about 60 seconds	*/
+#define TCP_FIN_TIMEOUT	TCP_TIMEWAIT_LEN
+                                 /* BSD style FIN_WAIT2 deadlock breaker.
+				  * It used to be 3min, new value is 60sec,
+				  * to combine FIN-WAIT-2 timeout with
+				  * TIME-WAIT timer.
+				  */
+
+#define TCP_DELACK_MAX	((unsigned)(HZ/5))	/* maximal time to delay before sending an ACK */
+#if HZ >= 100
+#define TCP_DELACK_MIN	((unsigned)(HZ/25))	/* minimal time to delay before sending an ACK */
+#define TCP_ATO_MIN	((unsigned)(HZ/25))
+#else
+#define TCP_DELACK_MIN	4U
+#define TCP_ATO_MIN	4U
+#endif
+#define TCP_RTO_MAX	((unsigned)(120*HZ))
+#define TCP_RTO_MIN	((unsigned)(HZ/5))
+#define TCP_TIMEOUT_INIT ((unsigned)(3*HZ))	/* RFC 1122 initial RTO value	*/
+
+#define TCP_RESOURCE_PROBE_INTERVAL ((unsigned)(HZ/2U)) /* Maximal interval between probes
+					                 * for local resources.
+					                 */
+
+#define TCP_KEEPALIVE_TIME	(120*60*HZ)	/* two hours */
+#define TCP_KEEPALIVE_PROBES	9		/* Max of 9 keepalive probes	*/
+#define TCP_KEEPALIVE_INTVL	(75*HZ)
+
+#define MAX_TCP_KEEPIDLE	32767
+#define MAX_TCP_KEEPINTVL	32767
+#define MAX_TCP_KEEPCNT		127
+#define MAX_TCP_SYNCNT		127
+
+#define TCP_SYNQ_INTERVAL	(HZ/5)	/* Period of SYNACK timer */
+#define TCP_SYNQ_HSIZE		512	/* Size of SYNACK hash table */
+
+#define TCP_PAWS_24DAYS	(60 * 60 * 24 * 24)
+#define TCP_PAWS_MSL	60		/* Per-host timestamps are invalidated
+					 * after this time. It should be equal
+					 * (or greater than) TCP_TIMEWAIT_LEN
+					 * to provide reliability equal to one
+					 * provided by timewait state.
+					 */
+#define TCP_PAWS_WINDOW	1		/* Replay window for per-host
+					 * timestamps. It must be less than
+					 * minimal timewait lifetime.
+					 */
+
+#define TCP_TW_RECYCLE_SLOTS_LOG	5
+#define TCP_TW_RECYCLE_SLOTS		(1<<TCP_TW_RECYCLE_SLOTS_LOG)
+
+/* If time > 4sec, it is "slow" path, no recycling is required,
+   so that we select tick to get range about 4 seconds.
+ */
+
+#if HZ <= 16 || HZ > 4096
+# error Unsupported: HZ <= 16 or HZ > 4096
+#elif HZ <= 32
+# define TCP_TW_RECYCLE_TICK (5+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 64
+# define TCP_TW_RECYCLE_TICK (6+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 128
+# define TCP_TW_RECYCLE_TICK (7+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 256
+# define TCP_TW_RECYCLE_TICK (8+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 512
+# define TCP_TW_RECYCLE_TICK (9+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 1024
+# define TCP_TW_RECYCLE_TICK (10+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#elif HZ <= 2048
+# define TCP_TW_RECYCLE_TICK (11+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#else
+# define TCP_TW_RECYCLE_TICK (12+2-TCP_TW_RECYCLE_SLOTS_LOG)
+#endif
+
+#define BICTCP_BETA_SCALE    1024	/* Scale factor beta calculation
+					 * max_cwnd = snd_cwnd * beta
+					 */
+#define BICTCP_MAX_INCREMENT 32		/*
+					 * Limit on the amount of
+					 * increment allowed during
+					 * binary search.
+					 */
+#define BICTCP_FUNC_OF_MIN_INCR 11	/*
+					 * log(B/Smin)/log(B/(B-1))+1,
+					 * Smin:min increment
+					 * B:log factor
+					 */
+#define BICTCP_B		4	 /*
+					  * In binary search,
+					  * go to point (max+min)/N
+					  */
+
+/*
+ *	TCP option
+ */
+ 
+#define TCPOPT_NOP		1	/* Padding */
+#define TCPOPT_EOL		0	/* End of options */
+#define TCPOPT_MSS		2	/* Segment size negotiating */
+#define TCPOPT_WINDOW		3	/* Window scaling */
+#define TCPOPT_SACK_PERM        4       /* SACK Permitted */
+#define TCPOPT_SACK             5       /* SACK Block */
+#define TCPOPT_TIMESTAMP	8	/* Better RTT estimations/PAWS */
+
+/*
+ *     TCP option lengths
+ */
+
+#define TCPOLEN_MSS            4
+#define TCPOLEN_WINDOW         3
+#define TCPOLEN_SACK_PERM      2
+#define TCPOLEN_TIMESTAMP      10
+
+/* But this is what stacks really send out. */
+#define TCPOLEN_TSTAMP_ALIGNED		12
+#define TCPOLEN_WSCALE_ALIGNED		4
+#define TCPOLEN_SACKPERM_ALIGNED	4
+#define TCPOLEN_SACK_BASE		2
+#define TCPOLEN_SACK_BASE_ALIGNED	4
+#define TCPOLEN_SACK_PERBLOCK		8
+
+#define TCP_TIME_RETRANS	1	/* Retransmit timer */
+#define TCP_TIME_DACK		2	/* Delayed ack timer */
+#define TCP_TIME_PROBE0		3	/* Zero window probe timer */
+#define TCP_TIME_KEEPOPEN	4	/* Keepalive timer */
+
+/* Flags in tp->nonagle */
+#define TCP_NAGLE_OFF		1	/* Nagle's algo is disabled */
+#define TCP_NAGLE_CORK		2	/* Socket is corked	    */
+#define TCP_NAGLE_PUSH		4	/* Cork is overriden for already queued data */
+
+/* sysctl variables for tcp */
+extern int sysctl_max_syn_backlog;
+extern int sysctl_tcp_timestamps;
+extern int sysctl_tcp_window_scaling;
+extern int sysctl_tcp_sack;
+extern int sysctl_tcp_fin_timeout;
+extern int sysctl_tcp_tw_recycle;
+extern int sysctl_tcp_keepalive_time;
+extern int sysctl_tcp_keepalive_probes;
+extern int sysctl_tcp_keepalive_intvl;
+extern int sysctl_tcp_syn_retries;
+extern int sysctl_tcp_synack_retries;
+extern int sysctl_tcp_retries1;
+extern int sysctl_tcp_retries2;
+extern int sysctl_tcp_orphan_retries;
+extern int sysctl_tcp_syncookies;
+extern int sysctl_tcp_retrans_collapse;
+extern int sysctl_tcp_stdurg;
+extern int sysctl_tcp_rfc1337;
+extern int sysctl_tcp_abort_on_overflow;
+extern int sysctl_tcp_max_orphans;
+extern int sysctl_tcp_max_tw_buckets;
+extern int sysctl_tcp_fack;
+extern int sysctl_tcp_reordering;
+extern int sysctl_tcp_ecn;
+extern int sysctl_tcp_dsack;
+extern int sysctl_tcp_mem[3];
+extern int sysctl_tcp_wmem[3];
+extern int sysctl_tcp_rmem[3];
+extern int sysctl_tcp_app_win;
+extern int sysctl_tcp_adv_win_scale;
+extern int sysctl_tcp_tw_reuse;
+extern int sysctl_tcp_frto;
+extern int sysctl_tcp_low_latency;
+extern int sysctl_tcp_westwood;
+extern int sysctl_tcp_vegas_cong_avoid;
+extern int sysctl_tcp_vegas_alpha;
+extern int sysctl_tcp_vegas_beta;
+extern int sysctl_tcp_vegas_gamma;
+extern int sysctl_tcp_nometrics_save;
+extern int sysctl_tcp_bic;
+extern int sysctl_tcp_bic_fast_convergence;
+extern int sysctl_tcp_bic_low_window;
+extern int sysctl_tcp_bic_beta;
+extern int sysctl_tcp_moderate_rcvbuf;
+extern int sysctl_tcp_tso_win_divisor;
+
+extern atomic_t tcp_memory_allocated;
+extern atomic_t tcp_sockets_allocated;
+extern int tcp_memory_pressure;
+
+struct open_request;
+
+struct or_calltable {
+	int  family;
+	int  (*rtx_syn_ack)	(struct sock *sk, struct open_request *req, struct dst_entry*);
+	void (*send_ack)	(struct sk_buff *skb, struct open_request *req);
+	void (*destructor)	(struct open_request *req);
+	void (*send_reset)	(struct sk_buff *skb);
+};
+
+struct tcp_v4_open_req {
+	__u32			loc_addr;
+	__u32			rmt_addr;
+	struct ip_options	*opt;
+};
+
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+struct tcp_v6_open_req {
+	struct in6_addr		loc_addr;
+	struct in6_addr		rmt_addr;
+	struct sk_buff		*pktopts;
+	int			iif;
+};
+#endif
+
+/* this structure is too big */
+struct open_request {
+	struct open_request	*dl_next; /* Must be first member! */
+	__u32			rcv_isn;
+	__u32			snt_isn;
+	__u16			rmt_port;
+	__u16			mss;
+	__u8			retrans;
+	__u8			__pad;
+	__u16	snd_wscale : 4, 
+		rcv_wscale : 4, 
+		tstamp_ok : 1,
+		sack_ok : 1,
+		wscale_ok : 1,
+		ecn_ok : 1,
+		acked : 1;
+	/* The following two fields can be easily recomputed I think -AK */
+	__u32			window_clamp;	/* window clamp at creation time */
+	__u32			rcv_wnd;	/* rcv_wnd offered first time */
+	__u32			ts_recent;
+	unsigned long		expires;
+	struct or_calltable	*class;
+	struct sock		*sk;
+	union {
+		struct tcp_v4_open_req v4_req;
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+		struct tcp_v6_open_req v6_req;
+#endif
+	} af;
+};
+
+/* SLAB cache for open requests. */
+extern kmem_cache_t *tcp_openreq_cachep;
+
+#define tcp_openreq_alloc()		kmem_cache_alloc(tcp_openreq_cachep, SLAB_ATOMIC)
+#define tcp_openreq_fastfree(req)	kmem_cache_free(tcp_openreq_cachep, req)
+
+static inline void tcp_openreq_free(struct open_request *req)
+{
+	req->class->destructor(req);
+	tcp_openreq_fastfree(req);
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#define TCP_INET_FAMILY(fam) ((fam) == AF_INET)
+#else
+#define TCP_INET_FAMILY(fam) 1
+#endif
+
+/*
+ *	Pointers to address related TCP functions
+ *	(i.e. things that depend on the address family)
+ */
+
+struct tcp_func {
+	int			(*queue_xmit)		(struct sk_buff *skb,
+							 int ipfragok);
+
+	void			(*send_check)		(struct sock *sk,
+							 struct tcphdr *th,
+							 int len,
+							 struct sk_buff *skb);
+
+	int			(*rebuild_header)	(struct sock *sk);
+
+	int			(*conn_request)		(struct sock *sk,
+							 struct sk_buff *skb);
+
+	struct sock *		(*syn_recv_sock)	(struct sock *sk,
+							 struct sk_buff *skb,
+							 struct open_request *req,
+							 struct dst_entry *dst);
+    
+	int			(*remember_stamp)	(struct sock *sk);
+
+	__u16			net_header_len;
+
+	int			(*setsockopt)		(struct sock *sk, 
+							 int level, 
+							 int optname, 
+							 char __user *optval, 
+							 int optlen);
+
+	int			(*getsockopt)		(struct sock *sk, 
+							 int level, 
+							 int optname, 
+							 char __user *optval, 
+							 int __user *optlen);
+
+
+	void			(*addr2sockaddr)	(struct sock *sk,
+							 struct sockaddr *);
+
+	int sockaddr_len;
+};
+
+/*
+ * The next routines deal with comparing 32 bit unsigned ints
+ * and worry about wraparound (automatic with unsigned arithmetic).
+ */
+
+static inline int before(__u32 seq1, __u32 seq2)
+{
+        return (__s32)(seq1-seq2) < 0;
+}
+
+static inline int after(__u32 seq1, __u32 seq2)
+{
+	return (__s32)(seq2-seq1) < 0;
+}
+
+
+/* is s2<=s1<=s3 ? */
+static inline int between(__u32 seq1, __u32 seq2, __u32 seq3)
+{
+	return seq3 - seq2 >= seq1 - seq2;
+}
+
+
+extern struct proto tcp_prot;
+
+DECLARE_SNMP_STAT(struct tcp_mib, tcp_statistics);
+#define TCP_INC_STATS(field)		SNMP_INC_STATS(tcp_statistics, field)
+#define TCP_INC_STATS_BH(field)		SNMP_INC_STATS_BH(tcp_statistics, field)
+#define TCP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(tcp_statistics, field)
+#define TCP_DEC_STATS(field)		SNMP_DEC_STATS(tcp_statistics, field)
+#define TCP_ADD_STATS_BH(field, val)	SNMP_ADD_STATS_BH(tcp_statistics, field, val)
+#define TCP_ADD_STATS_USER(field, val)	SNMP_ADD_STATS_USER(tcp_statistics, field, val)
+
+extern void			tcp_put_port(struct sock *sk);
+extern void			tcp_inherit_port(struct sock *sk, struct sock *child);
+
+extern void			tcp_v4_err(struct sk_buff *skb, u32);
+
+extern void			tcp_shutdown (struct sock *sk, int how);
+
+extern int			tcp_v4_rcv(struct sk_buff *skb);
+
+extern int			tcp_v4_remember_stamp(struct sock *sk);
+
+extern int		    	tcp_v4_tw_remember_stamp(struct tcp_tw_bucket *tw);
+
+extern int			tcp_sendmsg(struct kiocb *iocb, struct sock *sk,
+					    struct msghdr *msg, size_t size);
+extern ssize_t			tcp_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags);
+
+extern int			tcp_ioctl(struct sock *sk, 
+					  int cmd, 
+					  unsigned long arg);
+
+extern int			tcp_rcv_state_process(struct sock *sk, 
+						      struct sk_buff *skb,
+						      struct tcphdr *th,
+						      unsigned len);
+
+extern int			tcp_rcv_established(struct sock *sk, 
+						    struct sk_buff *skb,
+						    struct tcphdr *th, 
+						    unsigned len);
+
+extern void			tcp_rcv_space_adjust(struct sock *sk);
+
+enum tcp_ack_state_t
+{
+	TCP_ACK_SCHED = 1,
+	TCP_ACK_TIMER = 2,
+	TCP_ACK_PUSHED= 4
+};
+
+static inline void tcp_schedule_ack(struct tcp_sock *tp)
+{
+	tp->ack.pending |= TCP_ACK_SCHED;
+}
+
+static inline int tcp_ack_scheduled(struct tcp_sock *tp)
+{
+	return tp->ack.pending&TCP_ACK_SCHED;
+}
+
+static __inline__ void tcp_dec_quickack_mode(struct tcp_sock *tp)
+{
+	if (tp->ack.quick && --tp->ack.quick == 0) {
+		/* Leaving quickack mode we deflate ATO. */
+		tp->ack.ato = TCP_ATO_MIN;
+	}
+}
+
+extern void tcp_enter_quickack_mode(struct tcp_sock *tp);
+
+static __inline__ void tcp_delack_init(struct tcp_sock *tp)
+{
+	memset(&tp->ack, 0, sizeof(tp->ack));
+}
+
+static inline void tcp_clear_options(struct tcp_options_received *rx_opt)
+{
+ 	rx_opt->tstamp_ok = rx_opt->sack_ok = rx_opt->wscale_ok = rx_opt->snd_wscale = 0;
+}
+
+enum tcp_tw_status
+{
+	TCP_TW_SUCCESS = 0,
+	TCP_TW_RST = 1,
+	TCP_TW_ACK = 2,
+	TCP_TW_SYN = 3
+};
+
+
+extern enum tcp_tw_status	tcp_timewait_state_process(struct tcp_tw_bucket *tw,
+							   struct sk_buff *skb,
+							   struct tcphdr *th,
+							   unsigned len);
+
+extern struct sock *		tcp_check_req(struct sock *sk,struct sk_buff *skb,
+					      struct open_request *req,
+					      struct open_request **prev);
+extern int			tcp_child_process(struct sock *parent,
+						  struct sock *child,
+						  struct sk_buff *skb);
+extern void			tcp_enter_frto(struct sock *sk);
+extern void			tcp_enter_loss(struct sock *sk, int how);
+extern void			tcp_clear_retrans(struct tcp_sock *tp);
+extern void			tcp_update_metrics(struct sock *sk);
+
+extern void			tcp_close(struct sock *sk, 
+					  long timeout);
+extern struct sock *		tcp_accept(struct sock *sk, int flags, int *err);
+extern unsigned int		tcp_poll(struct file * file, struct socket *sock, struct poll_table_struct *wait);
+
+extern int			tcp_getsockopt(struct sock *sk, int level, 
+					       int optname,
+					       char __user *optval, 
+					       int __user *optlen);
+extern int			tcp_setsockopt(struct sock *sk, int level, 
+					       int optname, char __user *optval, 
+					       int optlen);
+extern void			tcp_set_keepalive(struct sock *sk, int val);
+extern int			tcp_recvmsg(struct kiocb *iocb, struct sock *sk,
+					    struct msghdr *msg,
+					    size_t len, int nonblock, 
+					    int flags, int *addr_len);
+
+extern int			tcp_listen_start(struct sock *sk);
+
+extern void			tcp_parse_options(struct sk_buff *skb,
+						  struct tcp_options_received *opt_rx,
+						  int estab);
+
+/*
+ *	TCP v4 functions exported for the inet6 API
+ */
+
+extern int		       	tcp_v4_rebuild_header(struct sock *sk);
+
+extern int		       	tcp_v4_build_header(struct sock *sk, 
+						    struct sk_buff *skb);
+
+extern void		       	tcp_v4_send_check(struct sock *sk, 
+						  struct tcphdr *th, int len, 
+						  struct sk_buff *skb);
+
+extern int			tcp_v4_conn_request(struct sock *sk,
+						    struct sk_buff *skb);
+
+extern struct sock *		tcp_create_openreq_child(struct sock *sk,
+							 struct open_request *req,
+							 struct sk_buff *skb);
+
+extern struct sock *		tcp_v4_syn_recv_sock(struct sock *sk,
+						     struct sk_buff *skb,
+						     struct open_request *req,
+							struct dst_entry *dst);
+
+extern int			tcp_v4_do_rcv(struct sock *sk,
+					      struct sk_buff *skb);
+
+extern int			tcp_v4_connect(struct sock *sk,
+					       struct sockaddr *uaddr,
+					       int addr_len);
+
+extern int			tcp_connect(struct sock *sk);
+
+extern struct sk_buff *		tcp_make_synack(struct sock *sk,
+						struct dst_entry *dst,
+						struct open_request *req);
+
+extern int			tcp_disconnect(struct sock *sk, int flags);
+
+extern void			tcp_unhash(struct sock *sk);
+
+extern int			tcp_v4_hash_connecting(struct sock *sk);
+
+
+/* From syncookies.c */
+extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, 
+				    struct ip_options *opt);
+extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, 
+				     __u16 *mss);
+
+/* tcp_output.c */
+
+extern int tcp_write_xmit(struct sock *, int nonagle);
+extern int tcp_retransmit_skb(struct sock *, struct sk_buff *);
+extern void tcp_xmit_retransmit_queue(struct sock *);
+extern void tcp_simple_retransmit(struct sock *);
+extern int tcp_trim_head(struct sock *, struct sk_buff *, u32);
+
+extern void tcp_send_probe0(struct sock *);
+extern void tcp_send_partial(struct sock *);
+extern int  tcp_write_wakeup(struct sock *);
+extern void tcp_send_fin(struct sock *sk);
+extern void tcp_send_active_reset(struct sock *sk, int priority);
+extern int  tcp_send_synack(struct sock *);
+extern void tcp_push_one(struct sock *, unsigned mss_now);
+extern void tcp_send_ack(struct sock *sk);
+extern void tcp_send_delayed_ack(struct sock *sk);
+
+/* tcp_timer.c */
+extern void tcp_init_xmit_timers(struct sock *);
+extern void tcp_clear_xmit_timers(struct sock *);
+
+extern void tcp_delete_keepalive_timer(struct sock *);
+extern void tcp_reset_keepalive_timer(struct sock *, unsigned long);
+extern unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu);
+extern unsigned int tcp_current_mss(struct sock *sk, int large);
+
+#ifdef TCP_DEBUG
+extern const char tcp_timer_bug_msg[];
+#endif
+
+/* tcp_diag.c */
+extern void tcp_get_info(struct sock *, struct tcp_info *);
+
+/* Read 'sendfile()'-style from a TCP socket */
+typedef int (*sk_read_actor_t)(read_descriptor_t *, struct sk_buff *,
+				unsigned int, size_t);
+extern int tcp_read_sock(struct sock *sk, read_descriptor_t *desc,
+			 sk_read_actor_t recv_actor);
+
+static inline void tcp_clear_xmit_timer(struct sock *sk, int what)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	
+	switch (what) {
+	case TCP_TIME_RETRANS:
+	case TCP_TIME_PROBE0:
+		tp->pending = 0;
+
+#ifdef TCP_CLEAR_TIMERS
+		sk_stop_timer(sk, &tp->retransmit_timer);
+#endif
+		break;
+	case TCP_TIME_DACK:
+		tp->ack.blocked = 0;
+		tp->ack.pending = 0;
+
+#ifdef TCP_CLEAR_TIMERS
+		sk_stop_timer(sk, &tp->delack_timer);
+#endif
+		break;
+	default:
+#ifdef TCP_DEBUG
+		printk(tcp_timer_bug_msg);
+#endif
+		return;
+	};
+
+}
+
+/*
+ *	Reset the retransmission timer
+ */
+static inline void tcp_reset_xmit_timer(struct sock *sk, int what, unsigned long when)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (when > TCP_RTO_MAX) {
+#ifdef TCP_DEBUG
+		printk(KERN_DEBUG "reset_xmit_timer sk=%p %d when=0x%lx, caller=%p\n", sk, what, when, current_text_addr());
+#endif
+		when = TCP_RTO_MAX;
+	}
+
+	switch (what) {
+	case TCP_TIME_RETRANS:
+	case TCP_TIME_PROBE0:
+		tp->pending = what;
+		tp->timeout = jiffies+when;
+		sk_reset_timer(sk, &tp->retransmit_timer, tp->timeout);
+		break;
+
+	case TCP_TIME_DACK:
+		tp->ack.pending |= TCP_ACK_TIMER;
+		tp->ack.timeout = jiffies+when;
+		sk_reset_timer(sk, &tp->delack_timer, tp->ack.timeout);
+		break;
+
+	default:
+#ifdef TCP_DEBUG
+		printk(tcp_timer_bug_msg);
+#endif
+		return;
+	};
+}
+
+/* Initialize RCV_MSS value.
+ * RCV_MSS is an our guess about MSS used by the peer.
+ * We haven't any direct information about the MSS.
+ * It's better to underestimate the RCV_MSS rather than overestimate.
+ * Overestimations make us ACKing less frequently than needed.
+ * Underestimations are more easy to detect and fix by tcp_measure_rcv_mss().
+ */
+
+static inline void tcp_initialize_rcv_mss(struct sock *sk)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	unsigned int hint = min(tp->advmss, tp->mss_cache_std);
+
+	hint = min(hint, tp->rcv_wnd/2);
+	hint = min(hint, TCP_MIN_RCVMSS);
+	hint = max(hint, TCP_MIN_MSS);
+
+	tp->ack.rcv_mss = hint;
+}
+
+static __inline__ void __tcp_fast_path_on(struct tcp_sock *tp, u32 snd_wnd)
+{
+	tp->pred_flags = htonl((tp->tcp_header_len << 26) |
+			       ntohl(TCP_FLAG_ACK) |
+			       snd_wnd);
+}
+
+static __inline__ void tcp_fast_path_on(struct tcp_sock *tp)
+{
+	__tcp_fast_path_on(tp, tp->snd_wnd >> tp->rx_opt.snd_wscale);
+}
+
+static inline void tcp_fast_path_check(struct sock *sk, struct tcp_sock *tp)
+{
+	if (skb_queue_len(&tp->out_of_order_queue) == 0 &&
+	    tp->rcv_wnd &&
+	    atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf &&
+	    !tp->urg_data)
+		tcp_fast_path_on(tp);
+}
+
+/* Compute the actual receive window we are currently advertising.
+ * Rcv_nxt can be after the window if our peer push more data
+ * than the offered window.
+ */
+static __inline__ u32 tcp_receive_window(const struct tcp_sock *tp)
+{
+	s32 win = tp->rcv_wup + tp->rcv_wnd - tp->rcv_nxt;
+
+	if (win < 0)
+		win = 0;
+	return (u32) win;
+}
+
+/* Choose a new window, without checks for shrinking, and without
+ * scaling applied to the result.  The caller does these things
+ * if necessary.  This is a "raw" window selection.
+ */
+extern u32	__tcp_select_window(struct sock *sk);
+
+/* TCP timestamps are only 32-bits, this causes a slight
+ * complication on 64-bit systems since we store a snapshot
+ * of jiffies in the buffer control blocks below.  We decidely
+ * only use of the low 32-bits of jiffies and hide the ugly
+ * casts with the following macro.
+ */
+#define tcp_time_stamp		((__u32)(jiffies))
+
+/* This is what the send packet queueing engine uses to pass
+ * TCP per-packet control information to the transmission
+ * code.  We also store the host-order sequence numbers in
+ * here too.  This is 36 bytes on 32-bit architectures,
+ * 40 bytes on 64-bit machines, if this grows please adjust
+ * skbuff.h:skbuff->cb[xxx] size appropriately.
+ */
+struct tcp_skb_cb {
+	union {
+		struct inet_skb_parm	h4;
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+		struct inet6_skb_parm	h6;
+#endif
+	} header;	/* For incoming frames		*/
+	__u32		seq;		/* Starting sequence number	*/
+	__u32		end_seq;	/* SEQ + FIN + SYN + datalen	*/
+	__u32		when;		/* used to compute rtt's	*/
+	__u8		flags;		/* TCP header flags.		*/
+
+	/* NOTE: These must match up to the flags byte in a
+	 *       real TCP header.
+	 */
+#define TCPCB_FLAG_FIN		0x01
+#define TCPCB_FLAG_SYN		0x02
+#define TCPCB_FLAG_RST		0x04
+#define TCPCB_FLAG_PSH		0x08
+#define TCPCB_FLAG_ACK		0x10
+#define TCPCB_FLAG_URG		0x20
+#define TCPCB_FLAG_ECE		0x40
+#define TCPCB_FLAG_CWR		0x80
+
+	__u8		sacked;		/* State flags for SACK/FACK.	*/
+#define TCPCB_SACKED_ACKED	0x01	/* SKB ACK'd by a SACK block	*/
+#define TCPCB_SACKED_RETRANS	0x02	/* SKB retransmitted		*/
+#define TCPCB_LOST		0x04	/* SKB is lost			*/
+#define TCPCB_TAGBITS		0x07	/* All tag bits			*/
+
+#define TCPCB_EVER_RETRANS	0x80	/* Ever retransmitted frame	*/
+#define TCPCB_RETRANS		(TCPCB_SACKED_RETRANS|TCPCB_EVER_RETRANS)
+
+#define TCPCB_URG		0x20	/* Urgent pointer advenced here	*/
+
+#define TCPCB_AT_TAIL		(TCPCB_URG)
+
+	__u16		urg_ptr;	/* Valid w/URG flags is set.	*/
+	__u32		ack_seq;	/* Sequence number ACK'd	*/
+};
+
+#define TCP_SKB_CB(__skb)	((struct tcp_skb_cb *)&((__skb)->cb[0]))
+
+#include <net/tcp_ecn.h>
+
+/* Due to TSO, an SKB can be composed of multiple actual
+ * packets.  To keep these tracked properly, we use this.
+ */
+static inline int tcp_skb_pcount(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->tso_segs;
+}
+
+/* This is valid iff tcp_skb_pcount() > 1. */
+static inline int tcp_skb_mss(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->tso_size;
+}
+
+static inline void tcp_dec_pcount_approx(__u32 *count,
+					 const struct sk_buff *skb)
+{
+	if (*count) {
+		*count -= tcp_skb_pcount(skb);
+		if ((int)*count < 0)
+			*count = 0;
+	}
+}
+
+static inline void tcp_packets_out_inc(struct sock *sk, 
+				       struct tcp_sock *tp,
+				       const struct sk_buff *skb)
+{
+	int orig = tp->packets_out;
+
+	tp->packets_out += tcp_skb_pcount(skb);
+	if (!orig)
+		tcp_reset_xmit_timer(sk, TCP_TIME_RETRANS, tp->rto);
+}
+
+static inline void tcp_packets_out_dec(struct tcp_sock *tp, 
+				       const struct sk_buff *skb)
+{
+	tp->packets_out -= tcp_skb_pcount(skb);
+}
+
+/* This determines how many packets are "in the network" to the best
+ * of our knowledge.  In many cases it is conservative, but where
+ * detailed information is available from the receiver (via SACK
+ * blocks etc.) we can make more aggressive calculations.
+ *
+ * Use this for decisions involving congestion control, use just
+ * tp->packets_out to determine if the send queue is empty or not.
+ *
+ * Read this equation as:
+ *
+ *	"Packets sent once on transmission queue" MINUS
+ *	"Packets left network, but not honestly ACKed yet" PLUS
+ *	"Packets fast retransmitted"
+ */
+static __inline__ unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
+{
+	return (tp->packets_out - tp->left_out + tp->retrans_out);
+}
+
+/*
+ * Which congestion algorithim is in use on the connection.
+ */
+#define tcp_is_vegas(__tp)	((__tp)->adv_cong == TCP_VEGAS)
+#define tcp_is_westwood(__tp)	((__tp)->adv_cong == TCP_WESTWOOD)
+#define tcp_is_bic(__tp)	((__tp)->adv_cong == TCP_BIC)
+
+/* Recalculate snd_ssthresh, we want to set it to:
+ *
+ * Reno:
+ * 	one half the current congestion window, but no
+ *	less than two segments
+ *
+ * BIC:
+ *	behave like Reno until low_window is reached,
+ *	then increase congestion window slowly
+ */
+static inline __u32 tcp_recalc_ssthresh(struct tcp_sock *tp)
+{
+	if (tcp_is_bic(tp)) {
+		if (sysctl_tcp_bic_fast_convergence &&
+		    tp->snd_cwnd < tp->bictcp.last_max_cwnd)
+			tp->bictcp.last_max_cwnd = (tp->snd_cwnd * 
+						    (BICTCP_BETA_SCALE
+						     + sysctl_tcp_bic_beta))
+				/ (2 * BICTCP_BETA_SCALE);
+		else
+			tp->bictcp.last_max_cwnd = tp->snd_cwnd;
+
+		if (tp->snd_cwnd > sysctl_tcp_bic_low_window)
+			return max((tp->snd_cwnd * sysctl_tcp_bic_beta)
+				   / BICTCP_BETA_SCALE, 2U);
+	}
+
+	return max(tp->snd_cwnd >> 1U, 2U);
+}
+
+/* Stop taking Vegas samples for now. */
+#define tcp_vegas_disable(__tp)	((__tp)->vegas.doing_vegas_now = 0)
+    
+static inline void tcp_vegas_enable(struct tcp_sock *tp)
+{
+	/* There are several situations when we must "re-start" Vegas:
+	 *
+	 *  o when a connection is established
+	 *  o after an RTO
+	 *  o after fast recovery
+	 *  o when we send a packet and there is no outstanding
+	 *    unacknowledged data (restarting an idle connection)
+	 *
+	 * In these circumstances we cannot do a Vegas calculation at the
+	 * end of the first RTT, because any calculation we do is using
+	 * stale info -- both the saved cwnd and congestion feedback are
+	 * stale.
+	 *
+	 * Instead we must wait until the completion of an RTT during
+	 * which we actually receive ACKs.
+	 */
+    
+	/* Begin taking Vegas samples next time we send something. */
+	tp->vegas.doing_vegas_now = 1;
+     
+	/* Set the beginning of the next send window. */
+	tp->vegas.beg_snd_nxt = tp->snd_nxt;
+
+	tp->vegas.cntRTT = 0;
+	tp->vegas.minRTT = 0x7fffffff;
+}
+
+/* Should we be taking Vegas samples right now? */
+#define tcp_vegas_enabled(__tp)	((__tp)->vegas.doing_vegas_now)
+
+extern void tcp_ca_init(struct tcp_sock *tp);
+
+static inline void tcp_set_ca_state(struct tcp_sock *tp, u8 ca_state)
+{
+	if (tcp_is_vegas(tp)) {
+		if (ca_state == TCP_CA_Open) 
+			tcp_vegas_enable(tp);
+		else
+			tcp_vegas_disable(tp);
+	}
+	tp->ca_state = ca_state;
+}
+
+/* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
+ * The exception is rate halving phase, when cwnd is decreasing towards
+ * ssthresh.
+ */
+static inline __u32 tcp_current_ssthresh(struct tcp_sock *tp)
+{
+	if ((1<<tp->ca_state)&(TCPF_CA_CWR|TCPF_CA_Recovery))
+		return tp->snd_ssthresh;
+	else
+		return max(tp->snd_ssthresh,
+			   ((tp->snd_cwnd >> 1) +
+			    (tp->snd_cwnd >> 2)));
+}
+
+static inline void tcp_sync_left_out(struct tcp_sock *tp)
+{
+	if (tp->rx_opt.sack_ok &&
+	    (tp->sacked_out >= tp->packets_out - tp->lost_out))
+		tp->sacked_out = tp->packets_out - tp->lost_out;
+	tp->left_out = tp->sacked_out + tp->lost_out;
+}
+
+extern void tcp_cwnd_application_limited(struct sock *sk);
+
+/* Congestion window validation. (RFC2861) */
+
+static inline void tcp_cwnd_validate(struct sock *sk, struct tcp_sock *tp)
+{
+	__u32 packets_out = tp->packets_out;
+
+	if (packets_out >= tp->snd_cwnd) {
+		/* Network is feed fully. */
+		tp->snd_cwnd_used = 0;
+		tp->snd_cwnd_stamp = tcp_time_stamp;
+	} else {
+		/* Network starves. */
+		if (tp->packets_out > tp->snd_cwnd_used)
+			tp->snd_cwnd_used = tp->packets_out;
+
+		if ((s32)(tcp_time_stamp - tp->snd_cwnd_stamp) >= tp->rto)
+			tcp_cwnd_application_limited(sk);
+	}
+}
+
+/* Set slow start threshould and cwnd not falling to slow start */
+static inline void __tcp_enter_cwr(struct tcp_sock *tp)
+{
+	tp->undo_marker = 0;
+	tp->snd_ssthresh = tcp_recalc_ssthresh(tp);
+	tp->snd_cwnd = min(tp->snd_cwnd,
+			   tcp_packets_in_flight(tp) + 1U);
+	tp->snd_cwnd_cnt = 0;
+	tp->high_seq = tp->snd_nxt;
+	tp->snd_cwnd_stamp = tcp_time_stamp;
+	TCP_ECN_queue_cwr(tp);
+}
+
+static inline void tcp_enter_cwr(struct tcp_sock *tp)
+{
+	tp->prior_ssthresh = 0;
+	if (tp->ca_state < TCP_CA_CWR) {
+		__tcp_enter_cwr(tp);
+		tcp_set_ca_state(tp, TCP_CA_CWR);
+	}
+}
+
+extern __u32 tcp_init_cwnd(struct tcp_sock *tp, struct dst_entry *dst);
+
+/* Slow start with delack produces 3 packets of burst, so that
+ * it is safe "de facto".
+ */
+static __inline__ __u32 tcp_max_burst(const struct tcp_sock *tp)
+{
+	return 3;
+}
+
+static __inline__ int tcp_minshall_check(const struct tcp_sock *tp)
+{
+	return after(tp->snd_sml,tp->snd_una) &&
+		!after(tp->snd_sml, tp->snd_nxt);
+}
+
+static __inline__ void tcp_minshall_update(struct tcp_sock *tp, int mss, 
+					   const struct sk_buff *skb)
+{
+	if (skb->len < mss)
+		tp->snd_sml = TCP_SKB_CB(skb)->end_seq;
+}
+
+/* Return 0, if packet can be sent now without violation Nagle's rules:
+   1. It is full sized.
+   2. Or it contains FIN.
+   3. Or TCP_NODELAY was set.
+   4. Or TCP_CORK is not set, and all sent packets are ACKed.
+      With Minshall's modification: all sent small packets are ACKed.
+ */
+
+static __inline__ int
+tcp_nagle_check(const struct tcp_sock *tp, const struct sk_buff *skb, 
+		unsigned mss_now, int nonagle)
+{
+	return (skb->len < mss_now &&
+		!(TCP_SKB_CB(skb)->flags & TCPCB_FLAG_FIN) &&
+		((nonagle&TCP_NAGLE_CORK) ||
+		 (!nonagle &&
+		  tp->packets_out &&
+		  tcp_minshall_check(tp))));
+}
+
+extern void tcp_set_skb_tso_segs(struct sk_buff *, unsigned int);
+
+/* This checks if the data bearing packet SKB (usually sk->sk_send_head)
+ * should be put on the wire right now.
+ */
+static __inline__ int tcp_snd_test(const struct tcp_sock *tp, 
+				   struct sk_buff *skb,
+				   unsigned cur_mss, int nonagle)
+{
+	int pkts = tcp_skb_pcount(skb);
+
+	if (!pkts) {
+		tcp_set_skb_tso_segs(skb, tp->mss_cache_std);
+		pkts = tcp_skb_pcount(skb);
+	}
+
+	/*	RFC 1122 - section 4.2.3.4
+	 *
+	 *	We must queue if
+	 *
+	 *	a) The right edge of this frame exceeds the window
+	 *	b) There are packets in flight and we have a small segment
+	 *	   [SWS avoidance and Nagle algorithm]
+	 *	   (part of SWS is done on packetization)
+	 *	   Minshall version sounds: there are no _small_
+	 *	   segments in flight. (tcp_nagle_check)
+	 *	c) We have too many packets 'in flight'
+	 *
+	 * 	Don't use the nagle rule for urgent data (or
+	 *	for the final FIN -DaveM).
+	 *
+	 *	Also, Nagle rule does not apply to frames, which
+	 *	sit in the middle of queue (they have no chances
+	 *	to get new data) and if room at tail of skb is
+	 *	not enough to save something seriously (<32 for now).
+	 */
+
+	/* Don't be strict about the congestion window for the
+	 * final FIN frame.  -DaveM
+	 */
+	return (((nonagle&TCP_NAGLE_PUSH) || tp->urg_mode
+		 || !tcp_nagle_check(tp, skb, cur_mss, nonagle)) &&
+		(((tcp_packets_in_flight(tp) + (pkts-1)) < tp->snd_cwnd) ||
+		 (TCP_SKB_CB(skb)->flags & TCPCB_FLAG_FIN)) &&
+		!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una + tp->snd_wnd));
+}
+
+static __inline__ void tcp_check_probe_timer(struct sock *sk, struct tcp_sock *tp)
+{
+	if (!tp->packets_out && !tp->pending)
+		tcp_reset_xmit_timer(sk, TCP_TIME_PROBE0, tp->rto);
+}
+
+static __inline__ int tcp_skb_is_last(const struct sock *sk, 
+				      const struct sk_buff *skb)
+{
+	return skb->next == (struct sk_buff *)&sk->sk_write_queue;
+}
+
+/* Push out any pending frames which were held back due to
+ * TCP_CORK or attempt at coalescing tiny packets.
+ * The socket must be locked by the caller.
+ */
+static __inline__ void __tcp_push_pending_frames(struct sock *sk,
+						 struct tcp_sock *tp,
+						 unsigned cur_mss,
+						 int nonagle)
+{
+	struct sk_buff *skb = sk->sk_send_head;
+
+	if (skb) {
+		if (!tcp_skb_is_last(sk, skb))
+			nonagle = TCP_NAGLE_PUSH;
+		if (!tcp_snd_test(tp, skb, cur_mss, nonagle) ||
+		    tcp_write_xmit(sk, nonagle))
+			tcp_check_probe_timer(sk, tp);
+	}
+	tcp_cwnd_validate(sk, tp);
+}
+
+static __inline__ void tcp_push_pending_frames(struct sock *sk,
+					       struct tcp_sock *tp)
+{
+	__tcp_push_pending_frames(sk, tp, tcp_current_mss(sk, 1), tp->nonagle);
+}
+
+static __inline__ int tcp_may_send_now(struct sock *sk, struct tcp_sock *tp)
+{
+	struct sk_buff *skb = sk->sk_send_head;
+
+	return (skb &&
+		tcp_snd_test(tp, skb, tcp_current_mss(sk, 1),
+			     tcp_skb_is_last(sk, skb) ? TCP_NAGLE_PUSH : tp->nonagle));
+}
+
+static __inline__ void tcp_init_wl(struct tcp_sock *tp, u32 ack, u32 seq)
+{
+	tp->snd_wl1 = seq;
+}
+
+static __inline__ void tcp_update_wl(struct tcp_sock *tp, u32 ack, u32 seq)
+{
+	tp->snd_wl1 = seq;
+}
+
+extern void tcp_destroy_sock(struct sock *sk);
+
+
+/*
+ * Calculate(/check) TCP checksum
+ */
+static __inline__ u16 tcp_v4_check(struct tcphdr *th, int len,
+				   unsigned long saddr, unsigned long daddr, 
+				   unsigned long base)
+{
+	return csum_tcpudp_magic(saddr,daddr,len,IPPROTO_TCP,base);
+}
+
+static __inline__ int __tcp_checksum_complete(struct sk_buff *skb)
+{
+	return (unsigned short)csum_fold(skb_checksum(skb, 0, skb->len, skb->csum));
+}
+
+static __inline__ int tcp_checksum_complete(struct sk_buff *skb)
+{
+	return skb->ip_summed != CHECKSUM_UNNECESSARY &&
+		__tcp_checksum_complete(skb);
+}
+
+/* Prequeue for VJ style copy to user, combined with checksumming. */
+
+static __inline__ void tcp_prequeue_init(struct tcp_sock *tp)
+{
+	tp->ucopy.task = NULL;
+	tp->ucopy.len = 0;
+	tp->ucopy.memory = 0;
+	skb_queue_head_init(&tp->ucopy.prequeue);
+}
+
+/* Packet is added to VJ-style prequeue for processing in process
+ * context, if a reader task is waiting. Apparently, this exciting
+ * idea (VJ's mail "Re: query about TCP header on tcp-ip" of 07 Sep 93)
+ * failed somewhere. Latency? Burstiness? Well, at least now we will
+ * see, why it failed. 8)8)				  --ANK
+ *
+ * NOTE: is this not too big to inline?
+ */
+static __inline__ int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (!sysctl_tcp_low_latency && tp->ucopy.task) {
+		__skb_queue_tail(&tp->ucopy.prequeue, skb);
+		tp->ucopy.memory += skb->truesize;
+		if (tp->ucopy.memory > sk->sk_rcvbuf) {
+			struct sk_buff *skb1;
+
+			BUG_ON(sock_owned_by_user(sk));
+
+			while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
+				sk->sk_backlog_rcv(sk, skb1);
+				NET_INC_STATS_BH(LINUX_MIB_TCPPREQUEUEDROPPED);
+			}
+
+			tp->ucopy.memory = 0;
+		} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
+			wake_up_interruptible(sk->sk_sleep);
+			if (!tcp_ack_scheduled(tp))
+				tcp_reset_xmit_timer(sk, TCP_TIME_DACK, (3*TCP_RTO_MIN)/4);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+
+#undef STATE_TRACE
+
+#ifdef STATE_TRACE
+static const char *statename[]={
+	"Unused","Established","Syn Sent","Syn Recv",
+	"Fin Wait 1","Fin Wait 2","Time Wait", "Close",
+	"Close Wait","Last ACK","Listen","Closing"
+};
+#endif
+
+static __inline__ void tcp_set_state(struct sock *sk, int state)
+{
+	int oldstate = sk->sk_state;
+
+	switch (state) {
+	case TCP_ESTABLISHED:
+		if (oldstate != TCP_ESTABLISHED)
+			TCP_INC_STATS(TCP_MIB_CURRESTAB);
+		break;
+
+	case TCP_CLOSE:
+		if (oldstate == TCP_CLOSE_WAIT || oldstate == TCP_ESTABLISHED)
+			TCP_INC_STATS(TCP_MIB_ESTABRESETS);
+
+		sk->sk_prot->unhash(sk);
+		if (tcp_sk(sk)->bind_hash &&
+		    !(sk->sk_userlocks & SOCK_BINDPORT_LOCK))
+			tcp_put_port(sk);
+		/* fall through */
+	default:
+		if (oldstate==TCP_ESTABLISHED)
+			TCP_DEC_STATS(TCP_MIB_CURRESTAB);
+	}
+
+	/* Change state AFTER socket is unhashed to avoid closed
+	 * socket sitting in hash tables.
+	 */
+	sk->sk_state = state;
+
+#ifdef STATE_TRACE
+	SOCK_DEBUG(sk, "TCP sk=%p, State %s -> %s\n",sk, statename[oldstate],statename[state]);
+#endif	
+}
+
+static __inline__ void tcp_done(struct sock *sk)
+{
+	tcp_set_state(sk, TCP_CLOSE);
+	tcp_clear_xmit_timers(sk);
+
+	sk->sk_shutdown = SHUTDOWN_MASK;
+
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk->sk_state_change(sk);
+	else
+		tcp_destroy_sock(sk);
+}
+
+static __inline__ void tcp_sack_reset(struct tcp_options_received *rx_opt)
+{
+	rx_opt->dsack = 0;
+	rx_opt->eff_sacks = 0;
+	rx_opt->num_sacks = 0;
+}
+
+static __inline__ void tcp_build_and_update_options(__u32 *ptr, struct tcp_sock *tp, __u32 tstamp)
+{
+	if (tp->rx_opt.tstamp_ok) {
+		*ptr++ = __constant_htonl((TCPOPT_NOP << 24) |
+					  (TCPOPT_NOP << 16) |
+					  (TCPOPT_TIMESTAMP << 8) |
+					  TCPOLEN_TIMESTAMP);
+		*ptr++ = htonl(tstamp);
+		*ptr++ = htonl(tp->rx_opt.ts_recent);
+	}
+	if (tp->rx_opt.eff_sacks) {
+		struct tcp_sack_block *sp = tp->rx_opt.dsack ? tp->duplicate_sack : tp->selective_acks;
+		int this_sack;
+
+		*ptr++ = __constant_htonl((TCPOPT_NOP << 24) |
+					  (TCPOPT_NOP << 16) |
+					  (TCPOPT_SACK << 8) |
+					  (TCPOLEN_SACK_BASE +
+					   (tp->rx_opt.eff_sacks * TCPOLEN_SACK_PERBLOCK)));
+		for(this_sack = 0; this_sack < tp->rx_opt.eff_sacks; this_sack++) {
+			*ptr++ = htonl(sp[this_sack].start_seq);
+			*ptr++ = htonl(sp[this_sack].end_seq);
+		}
+		if (tp->rx_opt.dsack) {
+			tp->rx_opt.dsack = 0;
+			tp->rx_opt.eff_sacks--;
+		}
+	}
+}
+
+/* Construct a tcp options header for a SYN or SYN_ACK packet.
+ * If this is every changed make sure to change the definition of
+ * MAX_SYN_SIZE to match the new maximum number of options that you
+ * can generate.
+ */
+static inline void tcp_syn_build_options(__u32 *ptr, int mss, int ts, int sack,
+					     int offer_wscale, int wscale, __u32 tstamp, __u32 ts_recent)
+{
+	/* We always get an MSS option.
+	 * The option bytes which will be seen in normal data
+	 * packets should timestamps be used, must be in the MSS
+	 * advertised.  But we subtract them from tp->mss_cache so
+	 * that calculations in tcp_sendmsg are simpler etc.
+	 * So account for this fact here if necessary.  If we
+	 * don't do this correctly, as a receiver we won't
+	 * recognize data packets as being full sized when we
+	 * should, and thus we won't abide by the delayed ACK
+	 * rules correctly.
+	 * SACKs don't matter, we never delay an ACK when we
+	 * have any of those going out.
+	 */
+	*ptr++ = htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | mss);
+	if (ts) {
+		if(sack)
+			*ptr++ = __constant_htonl((TCPOPT_SACK_PERM << 24) | (TCPOLEN_SACK_PERM << 16) |
+						  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+		else
+			*ptr++ = __constant_htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+						  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+		*ptr++ = htonl(tstamp);		/* TSVAL */
+		*ptr++ = htonl(ts_recent);	/* TSECR */
+	} else if(sack)
+		*ptr++ = __constant_htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+					  (TCPOPT_SACK_PERM << 8) | TCPOLEN_SACK_PERM);
+	if (offer_wscale)
+		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_WINDOW << 16) | (TCPOLEN_WINDOW << 8) | (wscale));
+}
+
+/* Determine a window scaling and initial window to offer. */
+extern void tcp_select_initial_window(int __space, __u32 mss,
+				      __u32 *rcv_wnd, __u32 *window_clamp,
+				      int wscale_ok, __u8 *rcv_wscale);
+
+static inline int tcp_win_from_space(int space)
+{
+	return sysctl_tcp_adv_win_scale<=0 ?
+		(space>>(-sysctl_tcp_adv_win_scale)) :
+		space - (space>>sysctl_tcp_adv_win_scale);
+}
+
+/* Note: caller must be prepared to deal with negative returns */ 
+static inline int tcp_space(const struct sock *sk)
+{
+	return tcp_win_from_space(sk->sk_rcvbuf -
+				  atomic_read(&sk->sk_rmem_alloc));
+} 
+
+static inline int tcp_full_space(const struct sock *sk)
+{
+	return tcp_win_from_space(sk->sk_rcvbuf); 
+}
+
+static inline void tcp_acceptq_queue(struct sock *sk, struct open_request *req,
+					 struct sock *child)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	req->sk = child;
+	sk_acceptq_added(sk);
+
+	if (!tp->accept_queue_tail) {
+		tp->accept_queue = req;
+	} else {
+		tp->accept_queue_tail->dl_next = req;
+	}
+	tp->accept_queue_tail = req;
+	req->dl_next = NULL;
+}
+
+struct tcp_listen_opt
+{
+	u8			max_qlen_log;	/* log_2 of maximal queued SYNs */
+	int			qlen;
+	int			qlen_young;
+	int			clock_hand;
+	u32			hash_rnd;
+	struct open_request	*syn_table[TCP_SYNQ_HSIZE];
+};
+
+static inline void
+tcp_synq_removed(struct sock *sk, struct open_request *req)
+{
+	struct tcp_listen_opt *lopt = tcp_sk(sk)->listen_opt;
+
+	if (--lopt->qlen == 0)
+		tcp_delete_keepalive_timer(sk);
+	if (req->retrans == 0)
+		lopt->qlen_young--;
+}
+
+static inline void tcp_synq_added(struct sock *sk)
+{
+	struct tcp_listen_opt *lopt = tcp_sk(sk)->listen_opt;
+
+	if (lopt->qlen++ == 0)
+		tcp_reset_keepalive_timer(sk, TCP_TIMEOUT_INIT);
+	lopt->qlen_young++;
+}
+
+static inline int tcp_synq_len(struct sock *sk)
+{
+	return tcp_sk(sk)->listen_opt->qlen;
+}
+
+static inline int tcp_synq_young(struct sock *sk)
+{
+	return tcp_sk(sk)->listen_opt->qlen_young;
+}
+
+static inline int tcp_synq_is_full(struct sock *sk)
+{
+	return tcp_synq_len(sk) >> tcp_sk(sk)->listen_opt->max_qlen_log;
+}
+
+static inline void tcp_synq_unlink(struct tcp_sock *tp, struct open_request *req,
+				       struct open_request **prev)
+{
+	write_lock(&tp->syn_wait_lock);
+	*prev = req->dl_next;
+	write_unlock(&tp->syn_wait_lock);
+}
+
+static inline void tcp_synq_drop(struct sock *sk, struct open_request *req,
+				     struct open_request **prev)
+{
+	tcp_synq_unlink(tcp_sk(sk), req, prev);
+	tcp_synq_removed(sk, req);
+	tcp_openreq_free(req);
+}
+
+static __inline__ void tcp_openreq_init(struct open_request *req,
+					struct tcp_options_received *rx_opt,
+					struct sk_buff *skb)
+{
+	req->rcv_wnd = 0;		/* So that tcp_send_synack() knows! */
+	req->rcv_isn = TCP_SKB_CB(skb)->seq;
+	req->mss = rx_opt->mss_clamp;
+	req->ts_recent = rx_opt->saw_tstamp ? rx_opt->rcv_tsval : 0;
+	req->tstamp_ok = rx_opt->tstamp_ok;
+	req->sack_ok = rx_opt->sack_ok;
+	req->snd_wscale = rx_opt->snd_wscale;
+	req->wscale_ok = rx_opt->wscale_ok;
+	req->acked = 0;
+	req->ecn_ok = 0;
+	req->rmt_port = skb->h.th->source;
+}
+
+extern void tcp_enter_memory_pressure(void);
+
+extern void tcp_listen_wlock(void);
+
+/* - We may sleep inside this lock.
+ * - If sleeping is not required (or called from BH),
+ *   use plain read_(un)lock(&tcp_lhash_lock).
+ */
+
+static inline void tcp_listen_lock(void)
+{
+	/* read_lock synchronizes to candidates to writers */
+	read_lock(&tcp_lhash_lock);
+	atomic_inc(&tcp_lhash_users);
+	read_unlock(&tcp_lhash_lock);
+}
+
+static inline void tcp_listen_unlock(void)
+{
+	if (atomic_dec_and_test(&tcp_lhash_users))
+		wake_up(&tcp_lhash_wait);
+}
+
+static inline int keepalive_intvl_when(const struct tcp_sock *tp)
+{
+	return tp->keepalive_intvl ? : sysctl_tcp_keepalive_intvl;
+}
+
+static inline int keepalive_time_when(const struct tcp_sock *tp)
+{
+	return tp->keepalive_time ? : sysctl_tcp_keepalive_time;
+}
+
+static inline int tcp_fin_time(const struct tcp_sock *tp)
+{
+	int fin_timeout = tp->linger2 ? : sysctl_tcp_fin_timeout;
+
+	if (fin_timeout < (tp->rto<<2) - (tp->rto>>1))
+		fin_timeout = (tp->rto<<2) - (tp->rto>>1);
+
+	return fin_timeout;
+}
+
+static inline int tcp_paws_check(const struct tcp_options_received *rx_opt, int rst)
+{
+	if ((s32)(rx_opt->rcv_tsval - rx_opt->ts_recent) >= 0)
+		return 0;
+	if (xtime.tv_sec >= rx_opt->ts_recent_stamp + TCP_PAWS_24DAYS)
+		return 0;
+
+	/* RST segments are not recommended to carry timestamp,
+	   and, if they do, it is recommended to ignore PAWS because
+	   "their cleanup function should take precedence over timestamps."
+	   Certainly, it is mistake. It is necessary to understand the reasons
+	   of this constraint to relax it: if peer reboots, clock may go
+	   out-of-sync and half-open connections will not be reset.
+	   Actually, the problem would be not existing if all
+	   the implementations followed draft about maintaining clock
+	   via reboots. Linux-2.2 DOES NOT!
+
+	   However, we can relax time bounds for RST segments to MSL.
+	 */
+	if (rst && xtime.tv_sec >= rx_opt->ts_recent_stamp + TCP_PAWS_MSL)
+		return 0;
+	return 1;
+}
+
+static inline void tcp_v4_setup_caps(struct sock *sk, struct dst_entry *dst)
+{
+	sk->sk_route_caps = dst->dev->features;
+	if (sk->sk_route_caps & NETIF_F_TSO) {
+		if (sock_flag(sk, SOCK_NO_LARGESEND) || dst->header_len)
+			sk->sk_route_caps &= ~NETIF_F_TSO;
+	}
+}
+
+#define TCP_CHECK_TIMER(sk) do { } while (0)
+
+static inline int tcp_use_frto(const struct sock *sk)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+	
+	/* F-RTO must be activated in sysctl and there must be some
+	 * unsent new data, and the advertised window should allow
+	 * sending it.
+	 */
+	return (sysctl_tcp_frto && sk->sk_send_head &&
+		!after(TCP_SKB_CB(sk->sk_send_head)->end_seq,
+		       tp->snd_una + tp->snd_wnd));
+}
+
+static inline void tcp_mib_init(void)
+{
+	/* See RFC 2012 */
+	TCP_ADD_STATS_USER(TCP_MIB_RTOALGORITHM, 1);
+	TCP_ADD_STATS_USER(TCP_MIB_RTOMIN, TCP_RTO_MIN*1000/HZ);
+	TCP_ADD_STATS_USER(TCP_MIB_RTOMAX, TCP_RTO_MAX*1000/HZ);
+	TCP_ADD_STATS_USER(TCP_MIB_MAXCONN, -1);
+}
+
+/* /proc */
+enum tcp_seq_states {
+	TCP_SEQ_STATE_LISTENING,
+	TCP_SEQ_STATE_OPENREQ,
+	TCP_SEQ_STATE_ESTABLISHED,
+	TCP_SEQ_STATE_TIME_WAIT,
+};
+
+struct tcp_seq_afinfo {
+	struct module		*owner;
+	char			*name;
+	sa_family_t		family;
+	int			(*seq_show) (struct seq_file *m, void *v);
+	struct file_operations	*seq_fops;
+};
+
+struct tcp_iter_state {
+	sa_family_t		family;
+	enum tcp_seq_states	state;
+	struct sock		*syn_wait_sk;
+	int			bucket, sbucket, num, uid;
+	struct seq_operations	seq_ops;
+};
+
+extern int tcp_proc_register(struct tcp_seq_afinfo *afinfo);
+extern void tcp_proc_unregister(struct tcp_seq_afinfo *afinfo);
+
+/* TCP Westwood functions and constants */
+
+#define TCP_WESTWOOD_INIT_RTT  (20*HZ)           /* maybe too conservative?! */
+#define TCP_WESTWOOD_RTT_MIN   (HZ/20)           /* 50ms */
+
+static inline void tcp_westwood_update_rtt(struct tcp_sock *tp, __u32 rtt_seq)
+{
+        if (tcp_is_westwood(tp))
+                tp->westwood.rtt = rtt_seq;
+}
+
+static inline __u32 __tcp_westwood_bw_rttmin(const struct tcp_sock *tp)
+{
+        return max((tp->westwood.bw_est) * (tp->westwood.rtt_min) /
+		   (__u32) (tp->mss_cache_std),
+		   2U);
+}
+
+static inline __u32 tcp_westwood_bw_rttmin(const struct tcp_sock *tp)
+{
+	return tcp_is_westwood(tp) ? __tcp_westwood_bw_rttmin(tp) : 0;
+}
+
+static inline int tcp_westwood_ssthresh(struct tcp_sock *tp)
+{
+	__u32 ssthresh = 0;
+
+	if (tcp_is_westwood(tp)) {
+		ssthresh = __tcp_westwood_bw_rttmin(tp);
+		if (ssthresh)
+			tp->snd_ssthresh = ssthresh;  
+	}
+
+	return (ssthresh != 0);
+}
+
+static inline int tcp_westwood_cwnd(struct tcp_sock *tp)
+{
+	__u32 cwnd = 0;
+
+	if (tcp_is_westwood(tp)) {
+		cwnd = __tcp_westwood_bw_rttmin(tp);
+		if (cwnd)
+			tp->snd_cwnd = cwnd;
+	}
+
+	return (cwnd != 0);
+}
+#endif	/* _TCP_H */
diff --git a/include/net/tcp_ecn.h b/include/net/tcp_ecn.h
new file mode 100644
index 000000000000..dc1456389a97
--- /dev/null
+++ b/include/net/tcp_ecn.h
@@ -0,0 +1,126 @@
+#ifndef _NET_TCP_ECN_H_
+#define _NET_TCP_ECN_H_ 1
+
+#include <net/inet_ecn.h>
+
+#define TCP_HP_BITS (~(TCP_RESERVED_BITS|TCP_FLAG_PSH))
+
+#define	TCP_ECN_OK		1
+#define TCP_ECN_QUEUE_CWR	2
+#define TCP_ECN_DEMAND_CWR	4
+
+static inline void TCP_ECN_queue_cwr(struct tcp_sock *tp)
+{
+	if (tp->ecn_flags&TCP_ECN_OK)
+		tp->ecn_flags |= TCP_ECN_QUEUE_CWR;
+}
+
+
+/* Output functions */
+
+static inline void TCP_ECN_send_synack(struct tcp_sock *tp,
+				       struct sk_buff *skb)
+{
+	TCP_SKB_CB(skb)->flags &= ~TCPCB_FLAG_CWR;
+	if (!(tp->ecn_flags&TCP_ECN_OK))
+		TCP_SKB_CB(skb)->flags &= ~TCPCB_FLAG_ECE;
+}
+
+static inline void TCP_ECN_send_syn(struct sock *sk, struct tcp_sock *tp,
+				    struct sk_buff *skb)
+{
+	tp->ecn_flags = 0;
+	if (sysctl_tcp_ecn && !(sk->sk_route_caps & NETIF_F_TSO)) {
+		TCP_SKB_CB(skb)->flags |= TCPCB_FLAG_ECE|TCPCB_FLAG_CWR;
+		tp->ecn_flags = TCP_ECN_OK;
+		sock_set_flag(sk, SOCK_NO_LARGESEND);
+	}
+}
+
+static __inline__ void
+TCP_ECN_make_synack(struct open_request *req, struct tcphdr *th)
+{
+	if (req->ecn_ok)
+		th->ece = 1;
+}
+
+static inline void TCP_ECN_send(struct sock *sk, struct tcp_sock *tp,
+				struct sk_buff *skb, int tcp_header_len)
+{
+	if (tp->ecn_flags & TCP_ECN_OK) {
+		/* Not-retransmitted data segment: set ECT and inject CWR. */
+		if (skb->len != tcp_header_len &&
+		    !before(TCP_SKB_CB(skb)->seq, tp->snd_nxt)) {
+			INET_ECN_xmit(sk);
+			if (tp->ecn_flags&TCP_ECN_QUEUE_CWR) {
+				tp->ecn_flags &= ~TCP_ECN_QUEUE_CWR;
+				skb->h.th->cwr = 1;
+			}
+		} else {
+			/* ACK or retransmitted segment: clear ECT|CE */
+			INET_ECN_dontxmit(sk);
+		}
+		if (tp->ecn_flags & TCP_ECN_DEMAND_CWR)
+			skb->h.th->ece = 1;
+	}
+}
+
+/* Input functions */
+
+static inline void TCP_ECN_accept_cwr(struct tcp_sock *tp, struct sk_buff *skb)
+{
+	if (skb->h.th->cwr)
+		tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
+}
+
+static inline void TCP_ECN_withdraw_cwr(struct tcp_sock *tp)
+{
+	tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
+}
+
+static inline void TCP_ECN_check_ce(struct tcp_sock *tp, struct sk_buff *skb)
+{
+	if (tp->ecn_flags&TCP_ECN_OK) {
+		if (INET_ECN_is_ce(TCP_SKB_CB(skb)->flags))
+			tp->ecn_flags |= TCP_ECN_DEMAND_CWR;
+		/* Funny extension: if ECT is not set on a segment,
+		 * it is surely retransmit. It is not in ECN RFC,
+		 * but Linux follows this rule. */
+		else if (INET_ECN_is_not_ect((TCP_SKB_CB(skb)->flags)))
+			tcp_enter_quickack_mode(tp);
+	}
+}
+
+static inline void TCP_ECN_rcv_synack(struct tcp_sock *tp, struct tcphdr *th)
+{
+	if ((tp->ecn_flags&TCP_ECN_OK) && (!th->ece || th->cwr))
+		tp->ecn_flags &= ~TCP_ECN_OK;
+}
+
+static inline void TCP_ECN_rcv_syn(struct tcp_sock *tp, struct tcphdr *th)
+{
+	if ((tp->ecn_flags&TCP_ECN_OK) && (!th->ece || !th->cwr))
+		tp->ecn_flags &= ~TCP_ECN_OK;
+}
+
+static inline int TCP_ECN_rcv_ecn_echo(struct tcp_sock *tp, struct tcphdr *th)
+{
+	if (th->ece && !th->syn && (tp->ecn_flags&TCP_ECN_OK))
+		return 1;
+	return 0;
+}
+
+static inline void TCP_ECN_openreq_child(struct tcp_sock *tp,
+					 struct open_request *req)
+{
+	tp->ecn_flags = req->ecn_ok ? TCP_ECN_OK : 0;
+}
+
+static __inline__ void
+TCP_ECN_create_request(struct open_request *req, struct tcphdr *th)
+{
+	if (sysctl_tcp_ecn && th->ece && th->cwr)
+		req->ecn_ok = 1;
+}
+
+#endif
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
new file mode 100644
index 000000000000..8b075ab7a26c
--- /dev/null
+++ b/include/net/transp_v6.h
@@ -0,0 +1,53 @@
+#ifndef _TRANSP_V6_H
+#define _TRANSP_V6_H
+
+#include <net/checksum.h>
+
+/*
+ *	IPv6 transport protocols
+ */
+
+#ifdef __KERNEL__
+
+extern struct proto rawv6_prot;
+extern struct proto udpv6_prot;
+extern struct proto tcpv6_prot;
+
+struct flowi;
+
+/* extention headers */
+extern void				ipv6_rthdr_init(void);
+extern void				ipv6_frag_init(void);
+extern void				ipv6_nodata_init(void);
+extern void				ipv6_destopt_init(void);
+
+/* transport protocols */
+extern void				rawv6_init(void);
+extern void				udpv6_init(void);
+extern void				tcpv6_init(void);
+
+extern int				udpv6_connect(struct sock *sk,
+						      struct sockaddr *uaddr,
+						      int addr_len);
+
+extern int			datagram_recv_ctl(struct sock *sk,
+						  struct msghdr *msg,
+						  struct sk_buff *skb);
+
+extern int			datagram_send_ctl(struct msghdr *msg,
+						  struct flowi *fl,
+						  struct ipv6_txoptions *opt,
+						  int *hlimit);
+
+#define		LOOPBACK4_IPV6		__constant_htonl(0x7f000006)
+
+/*
+ *	address family specific functions
+ */
+extern struct tcp_func	ipv4_specific;
+
+extern int inet6_destroy_sock(struct sock *sk);
+
+#endif
+
+#endif
diff --git a/include/net/udp.h b/include/net/udp.h
new file mode 100644
index 000000000000..c496d10101db
--- /dev/null
+++ b/include/net/udp.h
@@ -0,0 +1,99 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP module.
+ *
+ * Version:	@(#)udp.h	1.0.2	05/07/93
+ *
+ * Authors:	Ross Biro, <bir7@leland.Stanford.Edu>
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * Fixes:
+ *		Alan Cox	: Turned on udp checksums. I don't want to
+ *				  chase 'memory corruption' bugs that aren't!
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UDP_H
+#define _UDP_H
+
+#include <linux/udp.h>
+#include <linux/ip.h>
+#include <linux/list.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <linux/seq_file.h>
+
+#define UDP_HTABLE_SIZE		128
+
+/* udp.c: This needs to be shared by v4 and v6 because the lookup
+ *        and hashing code needs to work with different AF's yet
+ *        the port space is shared.
+ */
+extern struct hlist_head udp_hash[UDP_HTABLE_SIZE];
+extern rwlock_t udp_hash_lock;
+
+extern int udp_port_rover;
+
+static inline int udp_lport_inuse(u16 num)
+{
+	struct sock *sk;
+	struct hlist_node *node;
+
+	sk_for_each(sk, node, &udp_hash[num & (UDP_HTABLE_SIZE - 1)])
+		if (inet_sk(sk)->num == num)
+			return 1;
+	return 0;
+}
+
+/* Note: this must match 'valbool' in sock_setsockopt */
+#define UDP_CSUM_NOXMIT		1
+
+/* Used by SunRPC/xprt layer. */
+#define UDP_CSUM_NORCV		2
+
+/* Default, as per the RFC, is to always do csums. */
+#define UDP_CSUM_DEFAULT	0
+
+extern struct proto udp_prot;
+
+
+extern void	udp_err(struct sk_buff *, u32);
+
+extern int	udp_sendmsg(struct kiocb *iocb, struct sock *sk,
+			    struct msghdr *msg, size_t len);
+
+extern int	udp_rcv(struct sk_buff *skb);
+extern int	udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
+extern int	udp_disconnect(struct sock *sk, int flags);
+extern unsigned int udp_poll(struct file *file, struct socket *sock,
+			     poll_table *wait);
+
+DECLARE_SNMP_STAT(struct udp_mib, udp_statistics);
+#define UDP_INC_STATS(field)		SNMP_INC_STATS(udp_statistics, field)
+#define UDP_INC_STATS_BH(field)		SNMP_INC_STATS_BH(udp_statistics, field)
+#define UDP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(udp_statistics, field)
+
+/* /proc */
+struct udp_seq_afinfo {
+	struct module		*owner;
+	char			*name;
+	sa_family_t		family;
+	int 			(*seq_show) (struct seq_file *m, void *v);
+	struct file_operations	*seq_fops;
+};
+
+struct udp_iter_state {
+	sa_family_t		family;
+	int			bucket;
+	struct seq_operations	seq_ops;
+};
+
+extern int udp_proc_register(struct udp_seq_afinfo *afinfo);
+extern void udp_proc_unregister(struct udp_seq_afinfo *afinfo);
+#endif	/* _UDP_H */
diff --git a/include/net/x25.h b/include/net/x25.h
new file mode 100644
index 000000000000..7a1ba5bbb868
--- /dev/null
+++ b/include/net/x25.h
@@ -0,0 +1,273 @@
+/*
+ *	Declarations of X.25 Packet Layer type objects.
+ *
+ * 	History
+ *	nov/17/96	Jonathan Naylor	  Initial version.		
+ *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
+ *					  negotiation.
+ */
+
+#ifndef _X25_H
+#define _X25_H 
+#include <linux/x25.h>
+#include <net/sock.h>
+
+#define	X25_ADDR_LEN			16
+
+#define	X25_MAX_L2_LEN			18	/* 802.2 LLC */
+
+#define	X25_STD_MIN_LEN			3
+#define	X25_EXT_MIN_LEN			4
+
+#define	X25_GFI_SEQ_MASK		0x30
+#define	X25_GFI_STDSEQ			0x10
+#define	X25_GFI_EXTSEQ			0x20
+
+#define	X25_Q_BIT			0x80
+#define	X25_D_BIT			0x40
+#define	X25_STD_M_BIT			0x10
+#define	X25_EXT_M_BIT			0x01
+
+#define	X25_CALL_REQUEST		0x0B
+#define	X25_CALL_ACCEPTED		0x0F
+#define	X25_CLEAR_REQUEST		0x13
+#define	X25_CLEAR_CONFIRMATION		0x17
+#define	X25_DATA			0x00
+#define	X25_INTERRUPT			0x23
+#define	X25_INTERRUPT_CONFIRMATION	0x27
+#define	X25_RR				0x01
+#define	X25_RNR				0x05
+#define	X25_REJ				0x09
+#define	X25_RESET_REQUEST		0x1B
+#define	X25_RESET_CONFIRMATION		0x1F
+#define	X25_REGISTRATION_REQUEST	0xF3
+#define	X25_REGISTRATION_CONFIRMATION	0xF7
+#define	X25_RESTART_REQUEST		0xFB
+#define	X25_RESTART_CONFIRMATION	0xFF
+#define	X25_DIAGNOSTIC			0xF1
+#define	X25_ILLEGAL			0xFD
+
+/* Define the various conditions that may exist */
+
+#define	X25_COND_ACK_PENDING	0x01
+#define	X25_COND_OWN_RX_BUSY	0x02
+#define	X25_COND_PEER_RX_BUSY	0x04
+
+/* Define Link State constants. */
+enum {
+	X25_STATE_0,		/* Ready */
+	X25_STATE_1,		/* Awaiting Call Accepted */
+	X25_STATE_2,		/* Awaiting Clear Confirmation */
+	X25_STATE_3,		/* Data Transfer */
+	X25_STATE_4		/* Awaiting Reset Confirmation */
+};
+
+enum {
+	X25_LINK_STATE_0,
+	X25_LINK_STATE_1,
+	X25_LINK_STATE_2,
+	X25_LINK_STATE_3
+};
+
+#define X25_DEFAULT_T20		(180 * HZ)		/* Default T20 value */
+#define X25_DEFAULT_T21		(200 * HZ)		/* Default T21 value */
+#define X25_DEFAULT_T22		(180 * HZ)		/* Default T22 value */
+#define	X25_DEFAULT_T23		(180 * HZ)		/* Default T23 value */
+#define	X25_DEFAULT_T2		(3   * HZ)		/* Default ack holdback value */
+
+#define	X25_DEFAULT_WINDOW_SIZE	2			/* Default Window Size	*/
+#define	X25_DEFAULT_PACKET_SIZE	X25_PS128		/* Default Packet Size */
+#define	X25_DEFAULT_THROUGHPUT	0x0A			/* Deafult Throughput */
+#define	X25_DEFAULT_REVERSE	0x00			/* Default Reverse Charging */
+
+#define X25_SMODULUS 		8
+#define	X25_EMODULUS		128
+
+/*
+ *	X.25 Facilities constants.
+ */
+
+#define	X25_FAC_CLASS_MASK	0xC0
+
+#define	X25_FAC_CLASS_A		0x00
+#define	X25_FAC_CLASS_B		0x40
+#define	X25_FAC_CLASS_C		0x80
+#define	X25_FAC_CLASS_D		0xC0
+
+#define	X25_FAC_REVERSE		0x01
+#define	X25_FAC_THROUGHPUT	0x02
+#define	X25_FAC_PACKET_SIZE	0x42
+#define	X25_FAC_WINDOW_SIZE	0x43
+
+#define	X25_MAX_FAC_LEN		20		/* Plenty to spare */
+#define	X25_MAX_CUD_LEN		128
+
+/**
+ *	struct x25_route - x25 routing entry
+ *	@node - entry in x25_list_lock
+ *	@address - Start of address range
+ *	@sigdigits - Number of sig digits
+ *	@dev - More than one for MLP
+ *	@refcnt - reference counter
+ */
+struct x25_route {
+	struct list_head	node;		
+	struct x25_address	address;
+	unsigned int		sigdigits;
+	struct net_device	*dev;
+	atomic_t		refcnt;
+};
+
+struct x25_neigh {
+	struct list_head	node;
+	struct net_device	*dev;
+	unsigned int		state;
+	unsigned int		extended;
+	struct sk_buff_head	queue;
+	unsigned long		t20;
+	struct timer_list	t20timer;
+	unsigned long		global_facil_mask;
+	atomic_t		refcnt;
+};
+
+struct x25_sock {
+	struct sock		sk;
+	struct x25_address	source_addr, dest_addr;
+	struct x25_neigh	*neighbour;
+	unsigned int		lci;
+	unsigned char		state, condition, qbitincl, intflag;
+	unsigned short		vs, vr, va, vl;
+	unsigned long		t2, t21, t22, t23;
+	unsigned short		fraglen;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	fragment_queue;
+	struct sk_buff_head	interrupt_in_queue;
+	struct sk_buff_head	interrupt_out_queue;
+	struct timer_list	timer;
+	struct x25_causediag	causediag;
+	struct x25_facilities	facilities;
+	struct x25_calluserdata	calluserdata;
+	unsigned long 		vc_facil_mask;	/* inc_call facilities mask */
+};
+
+static inline struct x25_sock *x25_sk(const struct sock *sk)
+{
+	return (struct x25_sock *)sk;
+}
+
+/* af_x25.c */
+extern int  sysctl_x25_restart_request_timeout;
+extern int  sysctl_x25_call_request_timeout;
+extern int  sysctl_x25_reset_request_timeout;
+extern int  sysctl_x25_clear_request_timeout;
+extern int  sysctl_x25_ack_holdback_timeout;
+
+extern int  x25_addr_ntoa(unsigned char *, struct x25_address *,
+			  struct x25_address *);
+extern int  x25_addr_aton(unsigned char *, struct x25_address *,
+			  struct x25_address *);
+extern struct sock *x25_find_socket(unsigned int, struct x25_neigh *);
+extern void x25_destroy_socket(struct sock *);
+extern int  x25_rx_call_request(struct sk_buff *, struct x25_neigh *, unsigned int);
+extern void x25_kill_by_neigh(struct x25_neigh *);
+
+/* x25_dev.c */
+extern void x25_send_frame(struct sk_buff *, struct x25_neigh *);
+extern int  x25_lapb_receive_frame(struct sk_buff *, struct net_device *, struct packet_type *);
+extern void x25_establish_link(struct x25_neigh *);
+extern void x25_terminate_link(struct x25_neigh *);
+
+/* x25_facilities.c */
+extern int  x25_parse_facilities(struct sk_buff *, struct x25_facilities *, unsigned long *);
+extern int  x25_create_facilities(unsigned char *, struct x25_facilities *, unsigned long);
+extern int  x25_negotiate_facilities(struct sk_buff *, struct sock *, struct x25_facilities *);
+extern void x25_limit_facilities(struct x25_facilities *, struct x25_neigh *);
+
+/* x25_in.c */
+extern int  x25_process_rx_frame(struct sock *, struct sk_buff *);
+extern int  x25_backlog_rcv(struct sock *, struct sk_buff *);
+
+/* x25_link.c */
+extern void x25_link_control(struct sk_buff *, struct x25_neigh *, unsigned short);
+extern void x25_link_device_up(struct net_device *);
+extern void x25_link_device_down(struct net_device *);
+extern void x25_link_established(struct x25_neigh *);
+extern void x25_link_terminated(struct x25_neigh *);
+extern void x25_transmit_clear_request(struct x25_neigh *, unsigned int, unsigned char);
+extern void x25_transmit_link(struct sk_buff *, struct x25_neigh *);
+extern int  x25_subscr_ioctl(unsigned int, void __user *);
+extern struct x25_neigh *x25_get_neigh(struct net_device *);
+extern void x25_link_free(void);
+
+/* x25_neigh.c */
+static __inline__ void x25_neigh_hold(struct x25_neigh *nb)
+{
+	atomic_inc(&nb->refcnt);
+}
+
+static __inline__ void x25_neigh_put(struct x25_neigh *nb)
+{
+	if (atomic_dec_and_test(&nb->refcnt))
+		kfree(nb);
+}
+
+/* x25_out.c */
+extern  int x25_output(struct sock *, struct sk_buff *);
+extern void x25_kick(struct sock *);
+extern void x25_enquiry_response(struct sock *);
+
+/* x25_route.c */
+extern struct x25_route *x25_get_route(struct x25_address *addr);
+extern struct net_device *x25_dev_get(char *);
+extern void x25_route_device_down(struct net_device *dev);
+extern int  x25_route_ioctl(unsigned int, void __user *);
+extern void x25_route_free(void);
+
+static __inline__ void x25_route_hold(struct x25_route *rt)
+{
+	atomic_inc(&rt->refcnt);
+}
+
+static __inline__ void x25_route_put(struct x25_route *rt)
+{
+	if (atomic_dec_and_test(&rt->refcnt))
+		kfree(rt);
+}
+
+/* x25_subr.c */
+extern void x25_clear_queues(struct sock *);
+extern void x25_frames_acked(struct sock *, unsigned short);
+extern void x25_requeue_frames(struct sock *);
+extern int  x25_validate_nr(struct sock *, unsigned short);
+extern void x25_write_internal(struct sock *, int);
+extern int  x25_decode(struct sock *, struct sk_buff *, int *, int *, int *, int *, int *);
+extern void x25_disconnect(struct sock *, int, unsigned char, unsigned char);
+extern int x25_check_calluserdata(struct x25_calluserdata *,struct x25_calluserdata *);
+
+/* x25_timer.c */
+extern void x25_start_heartbeat(struct sock *);
+extern void x25_start_t2timer(struct sock *);
+extern void x25_start_t21timer(struct sock *);
+extern void x25_start_t22timer(struct sock *);
+extern void x25_start_t23timer(struct sock *);
+extern void x25_stop_heartbeat(struct sock *);
+extern void x25_stop_timer(struct sock *);
+extern unsigned long x25_display_timer(struct sock *);
+extern void x25_check_rbuf(struct sock *);
+
+/* sysctl_net_x25.c */
+extern void x25_register_sysctl(void);
+extern void x25_unregister_sysctl(void);
+struct x25_skb_cb {
+	unsigned flags;
+};
+#define X25_SKB_CB(s) ((struct x25_skb_cb *) ((s)->cb))
+
+extern struct hlist_head x25_list;
+extern rwlock_t x25_list_lock;
+extern struct list_head x25_route_list;
+extern rwlock_t x25_route_list_lock;
+
+extern int x25_proc_init(void);
+extern void x25_proc_exit(void);
+#endif
diff --git a/include/net/x25device.h b/include/net/x25device.h
new file mode 100644
index 000000000000..cf36a20ea3c5
--- /dev/null
+++ b/include/net/x25device.h
@@ -0,0 +1,17 @@
+#ifndef _X25DEVICE_H
+#define _X25DEVICE_H
+
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/skbuff.h>
+
+static inline unsigned short x25_type_trans(struct sk_buff *skb,
+					    struct net_device *dev)
+{
+	skb->mac.raw = skb->data;
+	skb->input_dev = skb->dev = dev;
+	skb->pkt_type = PACKET_HOST;
+	
+	return htons(ETH_P_X25);
+}
+#endif
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
new file mode 100644
index 000000000000..73e9a8ca3d3b
--- /dev/null
+++ b/include/net/xfrm.h
@@ -0,0 +1,905 @@
+#ifndef _NET_XFRM_H
+#define _NET_XFRM_H
+
+#include <linux/xfrm.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/crypto.h>
+#include <linux/pfkeyv2.h>
+#include <linux/in6.h>
+
+#include <net/sock.h>
+#include <net/dst.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_fib.h>
+
+#define XFRM_ALIGN8(len)	(((len) + 7) & ~7)
+
+extern struct semaphore xfrm_cfg_sem;
+
+/* Organization of SPD aka "XFRM rules"
+   ------------------------------------
+
+   Basic objects:
+   - policy rule, struct xfrm_policy (=SPD entry)
+   - bundle of transformations, struct dst_entry == struct xfrm_dst (=SA bundle)
+   - instance of a transformer, struct xfrm_state (=SA)
+   - template to clone xfrm_state, struct xfrm_tmpl
+
+   SPD is plain linear list of xfrm_policy rules, ordered by priority.
+   (To be compatible with existing pfkeyv2 implementations,
+   many rules with priority of 0x7fffffff are allowed to exist and
+   such rules are ordered in an unpredictable way, thanks to bsd folks.)
+
+   Lookup is plain linear search until the first match with selector.
+
+   If "action" is "block", then we prohibit the flow, otherwise:
+   if "xfrms_nr" is zero, the flow passes untransformed. Otherwise,
+   policy entry has list of up to XFRM_MAX_DEPTH transformations,
+   described by templates xfrm_tmpl. Each template is resolved
+   to a complete xfrm_state (see below) and we pack bundle of transformations
+   to a dst_entry returned to requestor.
+
+   dst -. xfrm  .-> xfrm_state #1
+    |---. child .-> dst -. xfrm .-> xfrm_state #2
+                     |---. child .-> dst -. xfrm .-> xfrm_state #3
+                                      |---. child .-> NULL
+
+   Bundles are cached at xrfm_policy struct (field ->bundles).
+
+
+   Resolution of xrfm_tmpl
+   -----------------------
+   Template contains:
+   1. ->mode		Mode: transport or tunnel
+   2. ->id.proto	Protocol: AH/ESP/IPCOMP
+   3. ->id.daddr	Remote tunnel endpoint, ignored for transport mode.
+      Q: allow to resolve security gateway?
+   4. ->id.spi          If not zero, static SPI.
+   5. ->saddr		Local tunnel endpoint, ignored for transport mode.
+   6. ->algos		List of allowed algos. Plain bitmask now.
+      Q: ealgos, aalgos, calgos. What a mess...
+   7. ->share		Sharing mode.
+      Q: how to implement private sharing mode? To add struct sock* to
+      flow id?
+
+   Having this template we search through SAD searching for entries
+   with appropriate mode/proto/algo, permitted by selector.
+   If no appropriate entry found, it is requested from key manager.
+
+   PROBLEMS:
+   Q: How to find all the bundles referring to a physical path for
+      PMTU discovery? Seems, dst should contain list of all parents...
+      and enter to infinite locking hierarchy disaster.
+      No! It is easier, we will not search for them, let them find us.
+      We add genid to each dst plus pointer to genid of raw IP route,
+      pmtu disc will update pmtu on raw IP route and increase its genid.
+      dst_check() will see this for top level and trigger resyncing
+      metrics. Plus, it will be made via sk->sk_dst_cache. Solved.
+ */
+
+/* Full description of state of transformer. */
+struct xfrm_state
+{
+	/* Note: bydst is re-used during gc */
+	struct list_head	bydst;
+	struct list_head	byspi;
+
+	atomic_t		refcnt;
+	spinlock_t		lock;
+
+	struct xfrm_id		id;
+	struct xfrm_selector	sel;
+
+	/* Key manger bits */
+	struct {
+		u8		state;
+		u8		dying;
+		u32		seq;
+	} km;
+
+	/* Parameters of this state. */
+	struct {
+		u32		reqid;
+		u8		mode;
+		u8		replay_window;
+		u8		aalgo, ealgo, calgo;
+		u8		flags;
+		u16		family;
+		xfrm_address_t	saddr;
+		int		header_len;
+		int		trailer_len;
+	} props;
+
+	struct xfrm_lifetime_cfg lft;
+
+	/* Data for transformer */
+	struct xfrm_algo	*aalg;
+	struct xfrm_algo	*ealg;
+	struct xfrm_algo	*calg;
+
+	/* Data for encapsulator */
+	struct xfrm_encap_tmpl	*encap;
+
+	/* IPComp needs an IPIP tunnel for handling uncompressed packets */
+	struct xfrm_state	*tunnel;
+
+	/* If a tunnel, number of users + 1 */
+	atomic_t		tunnel_users;
+
+	/* State for replay detection */
+	struct xfrm_replay_state replay;
+
+	/* Statistics */
+	struct xfrm_stats	stats;
+
+	struct xfrm_lifetime_cur curlft;
+	struct timer_list	timer;
+
+	/* Reference to data common to all the instances of this
+	 * transformer. */
+	struct xfrm_type	*type;
+
+	/* Private data of this transformer, format is opaque,
+	 * interpreted by xfrm_type methods. */
+	void			*data;
+};
+
+enum {
+	XFRM_STATE_VOID,
+	XFRM_STATE_ACQ,
+	XFRM_STATE_VALID,
+	XFRM_STATE_ERROR,
+	XFRM_STATE_EXPIRED,
+	XFRM_STATE_DEAD
+};
+
+struct xfrm_type;
+struct xfrm_dst;
+struct xfrm_policy_afinfo {
+	unsigned short		family;
+	rwlock_t		lock;
+	struct xfrm_type_map	*type_map;
+	struct dst_ops		*dst_ops;
+	void			(*garbage_collect)(void);
+	int			(*dst_lookup)(struct xfrm_dst **dst, struct flowi *fl);
+	struct dst_entry	*(*find_bundle)(struct flowi *fl, struct xfrm_policy *policy);
+	int			(*bundle_create)(struct xfrm_policy *policy, 
+						 struct xfrm_state **xfrm, 
+						 int nx,
+						 struct flowi *fl, 
+						 struct dst_entry **dst_p);
+	void			(*decode_session)(struct sk_buff *skb,
+						  struct flowi *fl);
+};
+
+extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo);
+extern int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo);
+
+#define XFRM_ACQ_EXPIRES	30
+
+struct xfrm_tmpl;
+struct xfrm_state_afinfo {
+	unsigned short		family;
+	rwlock_t		lock;
+	struct list_head	*state_bydst;
+	struct list_head	*state_byspi;
+	void			(*init_tempsel)(struct xfrm_state *x, struct flowi *fl,
+						struct xfrm_tmpl *tmpl,
+						xfrm_address_t *daddr, xfrm_address_t *saddr);
+	struct xfrm_state	*(*state_lookup)(xfrm_address_t *daddr, u32 spi, u8 proto);
+	struct xfrm_state	*(*find_acq)(u8 mode, u32 reqid, u8 proto, 
+					     xfrm_address_t *daddr, xfrm_address_t *saddr, 
+					     int create);
+};
+
+extern int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo);
+extern int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo);
+
+extern void xfrm_state_delete_tunnel(struct xfrm_state *x);
+
+struct xfrm_decap_state;
+struct xfrm_type
+{
+	char			*description;
+	struct module		*owner;
+	__u8			proto;
+
+	int			(*init_state)(struct xfrm_state *x, void *args);
+	void			(*destructor)(struct xfrm_state *);
+	int			(*input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
+	int			(*post_input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
+	int			(*output)(struct xfrm_state *, struct sk_buff *pskb);
+	/* Estimate maximal size of result of transformation of a dgram */
+	u32			(*get_max_size)(struct xfrm_state *, int size);
+};
+
+struct xfrm_type_map {
+	rwlock_t		lock;
+	struct xfrm_type	*map[256];
+};
+
+extern int xfrm_register_type(struct xfrm_type *type, unsigned short family);
+extern int xfrm_unregister_type(struct xfrm_type *type, unsigned short family);
+extern struct xfrm_type *xfrm_get_type(u8 proto, unsigned short family);
+extern void xfrm_put_type(struct xfrm_type *type);
+
+struct xfrm_tmpl
+{
+/* id in template is interpreted as:
+ * daddr - destination of tunnel, may be zero for transport mode.
+ * spi   - zero to acquire spi. Not zero if spi is static, then
+ *	   daddr must be fixed too.
+ * proto - AH/ESP/IPCOMP
+ */
+	struct xfrm_id		id;
+
+/* Source address of tunnel. Ignored, if it is not a tunnel. */
+	xfrm_address_t		saddr;
+
+	__u32			reqid;
+
+/* Mode: transport/tunnel */
+	__u8			mode;
+
+/* Sharing mode: unique, this session only, this user only etc. */
+	__u8			share;
+
+/* May skip this transfomration if no SA is found */
+	__u8			optional;
+
+/* Bit mask of algos allowed for acquisition */
+	__u32			aalgos;
+	__u32			ealgos;
+	__u32			calgos;
+};
+
+#define XFRM_MAX_DEPTH		4
+
+struct xfrm_policy
+{
+	struct xfrm_policy	*next;
+	struct list_head	list;
+
+	/* This lock only affects elements except for entry. */
+	rwlock_t		lock;
+	atomic_t		refcnt;
+	struct timer_list	timer;
+
+	u32			priority;
+	u32			index;
+	struct xfrm_selector	selector;
+	struct xfrm_lifetime_cfg lft;
+	struct xfrm_lifetime_cur curlft;
+	struct dst_entry       *bundles;
+	__u16			family;
+	__u8			action;
+	__u8			flags;
+	__u8			dead;
+	__u8			xfrm_nr;
+	struct xfrm_tmpl       	xfrm_vec[XFRM_MAX_DEPTH];
+};
+
+#define XFRM_KM_TIMEOUT		30
+
+struct xfrm_mgr
+{
+	struct list_head	list;
+	char			*id;
+	int			(*notify)(struct xfrm_state *x, int event);
+	int			(*acquire)(struct xfrm_state *x, struct xfrm_tmpl *, struct xfrm_policy *xp, int dir);
+	struct xfrm_policy	*(*compile_policy)(u16 family, int opt, u8 *data, int len, int *dir);
+	int			(*new_mapping)(struct xfrm_state *x, xfrm_address_t *ipaddr, u16 sport);
+	int			(*notify_policy)(struct xfrm_policy *x, int dir, int event);
+};
+
+extern int xfrm_register_km(struct xfrm_mgr *km);
+extern int xfrm_unregister_km(struct xfrm_mgr *km);
+
+
+extern struct xfrm_policy *xfrm_policy_list[XFRM_POLICY_MAX*2];
+
+static inline void xfrm_pol_hold(struct xfrm_policy *policy)
+{
+	if (likely(policy != NULL))
+		atomic_inc(&policy->refcnt);
+}
+
+extern void __xfrm_policy_destroy(struct xfrm_policy *policy);
+
+static inline void xfrm_pol_put(struct xfrm_policy *policy)
+{
+	if (atomic_dec_and_test(&policy->refcnt))
+		__xfrm_policy_destroy(policy);
+}
+
+#define XFRM_DST_HSIZE		1024
+
+static __inline__
+unsigned __xfrm4_dst_hash(xfrm_address_t *addr)
+{
+	unsigned h;
+	h = ntohl(addr->a4);
+	h = (h ^ (h>>16)) % XFRM_DST_HSIZE;
+	return h;
+}
+
+static __inline__
+unsigned __xfrm6_dst_hash(xfrm_address_t *addr)
+{
+	unsigned h;
+	h = ntohl(addr->a6[2]^addr->a6[3]);
+	h = (h ^ (h>>16)) % XFRM_DST_HSIZE;
+	return h;
+}
+
+static __inline__
+unsigned xfrm_dst_hash(xfrm_address_t *addr, unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_dst_hash(addr);
+	case AF_INET6:
+		return __xfrm6_dst_hash(addr);
+	}
+	return 0;
+}
+
+static __inline__
+unsigned __xfrm4_spi_hash(xfrm_address_t *addr, u32 spi, u8 proto)
+{
+	unsigned h;
+	h = ntohl(addr->a4^spi^proto);
+	h = (h ^ (h>>10) ^ (h>>20)) % XFRM_DST_HSIZE;
+	return h;
+}
+
+static __inline__
+unsigned __xfrm6_spi_hash(xfrm_address_t *addr, u32 spi, u8 proto)
+{
+	unsigned h;
+	h = ntohl(addr->a6[2]^addr->a6[3]^spi^proto);
+	h = (h ^ (h>>10) ^ (h>>20)) % XFRM_DST_HSIZE;
+	return h;
+}
+
+static __inline__
+unsigned xfrm_spi_hash(xfrm_address_t *addr, u32 spi, u8 proto, unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_spi_hash(addr, spi, proto);
+	case AF_INET6:
+		return __xfrm6_spi_hash(addr, spi, proto);
+	}
+	return 0;	/*XXX*/
+}
+
+extern void __xfrm_state_destroy(struct xfrm_state *);
+
+static inline void xfrm_state_put(struct xfrm_state *x)
+{
+	if (atomic_dec_and_test(&x->refcnt))
+		__xfrm_state_destroy(x);
+}
+
+static inline void xfrm_state_hold(struct xfrm_state *x)
+{
+	atomic_inc(&x->refcnt);
+}
+
+static __inline__ int addr_match(void *token1, void *token2, int prefixlen)
+{
+	__u32 *a1 = token1;
+	__u32 *a2 = token2;
+	int pdw;
+	int pbi;
+
+	pdw = prefixlen >> 5;	  /* num of whole __u32 in prefix */
+	pbi = prefixlen &  0x1f;  /* num of bits in incomplete u32 in prefix */
+
+	if (pdw)
+		if (memcmp(a1, a2, pdw << 2))
+			return 0;
+
+	if (pbi) {
+		__u32 mask;
+
+		mask = htonl((0xffffffff) << (32 - pbi));
+
+		if ((a1[pdw] ^ a2[pdw]) & mask)
+			return 0;
+	}
+
+	return 1;
+}
+
+static __inline__
+u16 xfrm_flowi_sport(struct flowi *fl)
+{
+	u16 port;
+	switch(fl->proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_UDP:
+	case IPPROTO_SCTP:
+		port = fl->fl_ip_sport;
+		break;
+	case IPPROTO_ICMP:
+	case IPPROTO_ICMPV6:
+		port = htons(fl->fl_icmp_type);
+		break;
+	default:
+		port = 0;	/*XXX*/
+	}
+	return port;
+}
+
+static __inline__
+u16 xfrm_flowi_dport(struct flowi *fl)
+{
+	u16 port;
+	switch(fl->proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_UDP:
+	case IPPROTO_SCTP:
+		port = fl->fl_ip_dport;
+		break;
+	case IPPROTO_ICMP:
+	case IPPROTO_ICMPV6:
+		port = htons(fl->fl_icmp_code);
+		break;
+	default:
+		port = 0;	/*XXX*/
+	}
+	return port;
+}
+
+static inline int
+__xfrm4_selector_match(struct xfrm_selector *sel, struct flowi *fl)
+{
+	return  addr_match(&fl->fl4_dst, &sel->daddr, sel->prefixlen_d) &&
+		addr_match(&fl->fl4_src, &sel->saddr, sel->prefixlen_s) &&
+		!((xfrm_flowi_dport(fl) ^ sel->dport) & sel->dport_mask) &&
+		!((xfrm_flowi_sport(fl) ^ sel->sport) & sel->sport_mask) &&
+		(fl->proto == sel->proto || !sel->proto) &&
+		(fl->oif == sel->ifindex || !sel->ifindex);
+}
+
+static inline int
+__xfrm6_selector_match(struct xfrm_selector *sel, struct flowi *fl)
+{
+	return  addr_match(&fl->fl6_dst, &sel->daddr, sel->prefixlen_d) &&
+		addr_match(&fl->fl6_src, &sel->saddr, sel->prefixlen_s) &&
+		!((xfrm_flowi_dport(fl) ^ sel->dport) & sel->dport_mask) &&
+		!((xfrm_flowi_sport(fl) ^ sel->sport) & sel->sport_mask) &&
+		(fl->proto == sel->proto || !sel->proto) &&
+		(fl->oif == sel->ifindex || !sel->ifindex);
+}
+
+static inline int
+xfrm_selector_match(struct xfrm_selector *sel, struct flowi *fl,
+		    unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_selector_match(sel, fl);
+	case AF_INET6:
+		return __xfrm6_selector_match(sel, fl);
+	}
+	return 0;
+}
+
+/* A struct encoding bundle of transformations to apply to some set of flow.
+ *
+ * dst->child points to the next element of bundle.
+ * dst->xfrm  points to an instanse of transformer.
+ *
+ * Due to unfortunate limitations of current routing cache, which we
+ * have no time to fix, it mirrors struct rtable and bound to the same
+ * routing key, including saddr,daddr. However, we can have many of
+ * bundles differing by session id. All the bundles grow from a parent
+ * policy rule.
+ */
+struct xfrm_dst
+{
+	union {
+		struct xfrm_dst		*next;
+		struct dst_entry	dst;
+		struct rtable		rt;
+		struct rt6_info		rt6;
+	} u;
+	struct dst_entry *route;
+	u32 route_mtu_cached;
+	u32 child_mtu_cached;
+};
+
+/* Decapsulation state, used by the input to store data during
+ * decapsulation procedure, to be used later (during the policy
+ * check
+ */
+struct xfrm_decap_state {
+	char	decap_data[20];
+	__u16	decap_type;
+};   
+
+struct sec_decap_state {
+	struct xfrm_state	*xvec;
+	struct xfrm_decap_state decap;
+};
+
+struct sec_path
+{
+	atomic_t		refcnt;
+	int			len;
+	struct sec_decap_state	x[XFRM_MAX_DEPTH];
+};
+
+static inline struct sec_path *
+secpath_get(struct sec_path *sp)
+{
+	if (sp)
+		atomic_inc(&sp->refcnt);
+	return sp;
+}
+
+extern void __secpath_destroy(struct sec_path *sp);
+
+static inline void
+secpath_put(struct sec_path *sp)
+{
+	if (sp && atomic_dec_and_test(&sp->refcnt))
+		__secpath_destroy(sp);
+}
+
+extern struct sec_path *secpath_dup(struct sec_path *src);
+
+static inline void
+secpath_reset(struct sk_buff *skb)
+{
+#ifdef CONFIG_XFRM
+	secpath_put(skb->sp);
+	skb->sp = NULL;
+#endif
+}
+
+static inline int
+__xfrm4_state_addr_cmp(struct xfrm_tmpl *tmpl, struct xfrm_state *x)
+{
+	return	(tmpl->saddr.a4 &&
+		 tmpl->saddr.a4 != x->props.saddr.a4);
+}
+
+static inline int
+__xfrm6_state_addr_cmp(struct xfrm_tmpl *tmpl, struct xfrm_state *x)
+{
+	return	(!ipv6_addr_any((struct in6_addr*)&tmpl->saddr) &&
+		 ipv6_addr_cmp((struct in6_addr *)&tmpl->saddr, (struct in6_addr*)&x->props.saddr));
+}
+
+static inline int
+xfrm_state_addr_cmp(struct xfrm_tmpl *tmpl, struct xfrm_state *x, unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_state_addr_cmp(tmpl, x);
+	case AF_INET6:
+		return __xfrm6_state_addr_cmp(tmpl, x);
+	}
+	return !0;
+}
+
+#ifdef CONFIG_XFRM
+
+extern int __xfrm_policy_check(struct sock *, int dir, struct sk_buff *skb, unsigned short family);
+
+static inline int xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, unsigned short family)
+{
+	if (sk && sk->sk_policy[XFRM_POLICY_IN])
+		return __xfrm_policy_check(sk, dir, skb, family);
+		
+	return	(!xfrm_policy_list[dir] && !skb->sp) ||
+		(skb->dst->flags & DST_NOPOLICY) ||
+		__xfrm_policy_check(sk, dir, skb, family);
+}
+
+static inline int xfrm4_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return xfrm_policy_check(sk, dir, skb, AF_INET);
+}
+
+static inline int xfrm6_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return xfrm_policy_check(sk, dir, skb, AF_INET6);
+}
+
+
+extern int __xfrm_route_forward(struct sk_buff *skb, unsigned short family);
+
+static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family)
+{
+	return	!xfrm_policy_list[XFRM_POLICY_OUT] ||
+		(skb->dst->flags & DST_NOXFRM) ||
+		__xfrm_route_forward(skb, family);
+}
+
+static inline int xfrm4_route_forward(struct sk_buff *skb)
+{
+	return xfrm_route_forward(skb, AF_INET);
+}
+
+static inline int xfrm6_route_forward(struct sk_buff *skb)
+{
+	return xfrm_route_forward(skb, AF_INET6);
+}
+
+extern int __xfrm_sk_clone_policy(struct sock *sk);
+
+static inline int xfrm_sk_clone_policy(struct sock *sk)
+{
+	if (unlikely(sk->sk_policy[0] || sk->sk_policy[1]))
+		return __xfrm_sk_clone_policy(sk);
+	return 0;
+}
+
+extern void xfrm_policy_delete(struct xfrm_policy *pol, int dir);
+
+static inline void xfrm_sk_free_policy(struct sock *sk)
+{
+	if (unlikely(sk->sk_policy[0] != NULL)) {
+		xfrm_policy_delete(sk->sk_policy[0], XFRM_POLICY_MAX);
+		sk->sk_policy[0] = NULL;
+	}
+	if (unlikely(sk->sk_policy[1] != NULL)) {
+		xfrm_policy_delete(sk->sk_policy[1], XFRM_POLICY_MAX+1);
+		sk->sk_policy[1] = NULL;
+	}
+}
+
+#else
+
+static inline void xfrm_sk_free_policy(struct sock *sk) {}
+static inline int xfrm_sk_clone_policy(struct sock *sk) { return 0; }
+static inline int xfrm6_route_forward(struct sk_buff *skb) { return 1; }  
+static inline int xfrm4_route_forward(struct sk_buff *skb) { return 1; } 
+static inline int xfrm6_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{ 
+	return 1; 
+} 
+static inline int xfrm4_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return 1;
+}
+static inline int xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, unsigned short family)
+{
+	return 1;
+}
+#endif
+
+static __inline__
+xfrm_address_t *xfrm_flowi_daddr(struct flowi *fl, unsigned short family)
+{
+	switch (family){
+	case AF_INET:
+		return (xfrm_address_t *)&fl->fl4_dst;
+	case AF_INET6:
+		return (xfrm_address_t *)&fl->fl6_dst;
+	}
+	return NULL;
+}
+
+static __inline__
+xfrm_address_t *xfrm_flowi_saddr(struct flowi *fl, unsigned short family)
+{
+	switch (family){
+	case AF_INET:
+		return (xfrm_address_t *)&fl->fl4_src;
+	case AF_INET6:
+		return (xfrm_address_t *)&fl->fl6_src;
+	}
+	return NULL;
+}
+
+static __inline__ int
+__xfrm4_state_addr_check(struct xfrm_state *x,
+			 xfrm_address_t *daddr, xfrm_address_t *saddr)
+{
+	if (daddr->a4 == x->id.daddr.a4 &&
+	    (saddr->a4 == x->props.saddr.a4 || !saddr->a4 || !x->props.saddr.a4))
+		return 1;
+	return 0;
+}
+
+static __inline__ int
+__xfrm6_state_addr_check(struct xfrm_state *x,
+			 xfrm_address_t *daddr, xfrm_address_t *saddr)
+{
+	if (!ipv6_addr_cmp((struct in6_addr *)daddr, (struct in6_addr *)&x->id.daddr) &&
+	    (!ipv6_addr_cmp((struct in6_addr *)saddr, (struct in6_addr *)&x->props.saddr)|| 
+	     ipv6_addr_any((struct in6_addr *)saddr) || 
+	     ipv6_addr_any((struct in6_addr *)&x->props.saddr)))
+		return 1;
+	return 0;
+}
+
+static __inline__ int
+xfrm_state_addr_check(struct xfrm_state *x,
+		      xfrm_address_t *daddr, xfrm_address_t *saddr,
+		      unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_state_addr_check(x, daddr, saddr);
+	case AF_INET6:
+		return __xfrm6_state_addr_check(x, daddr, saddr);
+	}
+	return 0;
+}
+
+static inline int xfrm_state_kern(struct xfrm_state *x)
+{
+	return atomic_read(&x->tunnel_users);
+}
+
+/*
+ * xfrm algorithm information
+ */
+struct xfrm_algo_auth_info {
+	u16 icv_truncbits;
+	u16 icv_fullbits;
+};
+
+struct xfrm_algo_encr_info {
+	u16 blockbits;
+	u16 defkeybits;
+};
+
+struct xfrm_algo_comp_info {
+	u16 threshold;
+};
+
+struct xfrm_algo_desc {
+	char *name;
+	u8 available:1;
+	union {
+		struct xfrm_algo_auth_info auth;
+		struct xfrm_algo_encr_info encr;
+		struct xfrm_algo_comp_info comp;
+	} uinfo;
+	struct sadb_alg desc;
+};
+
+/* XFRM tunnel handlers.  */
+struct xfrm_tunnel {
+	int (*handler)(struct sk_buff *skb);
+	void (*err_handler)(struct sk_buff *skb, void *info);
+};
+
+struct xfrm6_tunnel {
+	int (*handler)(struct sk_buff **pskb, unsigned int *nhoffp);
+	void (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
+			    int type, int code, int offset, __u32 info);
+};
+
+extern void xfrm_init(void);
+extern void xfrm4_init(void);
+extern void xfrm6_init(void);
+extern void xfrm6_fini(void);
+extern void xfrm_state_init(void);
+extern void xfrm4_state_init(void);
+extern void xfrm4_state_fini(void);
+extern void xfrm6_state_init(void);
+extern void xfrm6_state_fini(void);
+
+extern int xfrm_state_walk(u8 proto, int (*func)(struct xfrm_state *, int, void*), void *);
+extern struct xfrm_state *xfrm_state_alloc(void);
+extern struct xfrm_state *xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, 
+					  struct flowi *fl, struct xfrm_tmpl *tmpl,
+					  struct xfrm_policy *pol, int *err,
+					  unsigned short family);
+extern int xfrm_state_check_expire(struct xfrm_state *x);
+extern void xfrm_state_insert(struct xfrm_state *x);
+extern int xfrm_state_add(struct xfrm_state *x);
+extern int xfrm_state_update(struct xfrm_state *x);
+extern struct xfrm_state *xfrm_state_lookup(xfrm_address_t *daddr, u32 spi, u8 proto, unsigned short family);
+extern struct xfrm_state *xfrm_find_acq_byseq(u32 seq);
+extern void xfrm_state_delete(struct xfrm_state *x);
+extern void xfrm_state_flush(u8 proto);
+extern int xfrm_replay_check(struct xfrm_state *x, u32 seq);
+extern void xfrm_replay_advance(struct xfrm_state *x, u32 seq);
+extern int xfrm_state_check(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm_state_mtu(struct xfrm_state *x, int mtu);
+extern int xfrm4_rcv(struct sk_buff *skb);
+extern int xfrm4_output(struct sk_buff *skb);
+extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler);
+extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler);
+extern int xfrm6_rcv_spi(struct sk_buff **pskb, unsigned int *nhoffp, u32 spi);
+extern int xfrm6_rcv(struct sk_buff **pskb, unsigned int *nhoffp);
+extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler);
+extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler);
+extern u32 xfrm6_tunnel_alloc_spi(xfrm_address_t *saddr);
+extern void xfrm6_tunnel_free_spi(xfrm_address_t *saddr);
+extern u32 xfrm6_tunnel_spi_lookup(xfrm_address_t *saddr);
+extern int xfrm6_output(struct sk_buff *skb);
+
+#ifdef CONFIG_XFRM
+extern int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type);
+extern int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen);
+extern int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsigned short family);
+#else
+static inline int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen)
+{
+ 	return -ENOPROTOOPT;
+} 
+
+static inline int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type)
+{
+ 	/* should not happen */
+ 	kfree_skb(skb);
+	return 0;
+}
+static inline int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsigned short family)
+{
+	return -EINVAL;
+} 
+#endif
+
+struct xfrm_policy *xfrm_policy_alloc(int gfp);
+extern int xfrm_policy_walk(int (*func)(struct xfrm_policy *, int, int, void*), void *);
+int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl);
+struct xfrm_policy *xfrm_policy_bysel(int dir, struct xfrm_selector *sel,
+				      int delete);
+struct xfrm_policy *xfrm_policy_byid(int dir, u32 id, int delete);
+void xfrm_policy_flush(void);
+u32 xfrm_get_acqseq(void);
+void xfrm_alloc_spi(struct xfrm_state *x, u32 minspi, u32 maxspi);
+struct xfrm_state * xfrm_find_acq(u8 mode, u32 reqid, u8 proto, 
+				  xfrm_address_t *daddr, xfrm_address_t *saddr, 
+				  int create, unsigned short family);
+extern void xfrm_policy_flush(void);
+extern int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol);
+extern int xfrm_flush_bundles(void);
+extern int xfrm_bundle_ok(struct xfrm_dst *xdst, struct flowi *fl, int family);
+extern void xfrm_init_pmtu(struct dst_entry *dst);
+
+extern wait_queue_head_t km_waitq;
+extern int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, u16 sport);
+extern void km_policy_expired(struct xfrm_policy *pol, int dir, int hard);
+
+extern void xfrm_input_init(void);
+extern int xfrm_parse_spi(struct sk_buff *skb, u8 nexthdr, u32 *spi, u32 *seq);
+
+extern void xfrm_probe_algs(void);
+extern int xfrm_count_auth_supported(void);
+extern int xfrm_count_enc_supported(void);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byidx(unsigned int idx);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byidx(unsigned int idx);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_calg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byname(char *name, int probe);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byname(char *name, int probe);
+extern struct xfrm_algo_desc *xfrm_calg_get_byname(char *name, int probe);
+
+struct crypto_tfm;
+typedef void (icv_update_fn_t)(struct crypto_tfm *, struct scatterlist *, unsigned int);
+
+extern void skb_icv_walk(const struct sk_buff *skb, struct crypto_tfm *tfm,
+			 int offset, int len, icv_update_fn_t icv_update);
+
+static inline int xfrm_addr_cmp(xfrm_address_t *a, xfrm_address_t *b,
+				int family)
+{
+	switch (family) {
+	default:
+	case AF_INET:
+		return a->a4 - b->a4;
+	case AF_INET6:
+		return ipv6_addr_cmp((struct in6_addr *)a,
+				     (struct in6_addr *)b);
+	}
+}
+
+#endif	/* _NET_XFRM_H */
diff --git a/include/pcmcia/bulkmem.h b/include/pcmcia/bulkmem.h
new file mode 100644
index 000000000000..b53b78d497ba
--- /dev/null
+++ b/include/pcmcia/bulkmem.h
@@ -0,0 +1,41 @@
+/*
+ * bulkmem.h -- Definitions for bulk memory services
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999		David A. Hinds
+ */
+
+#ifndef _LINUX_BULKMEM_H
+#define _LINUX_BULKMEM_H
+
+/* For GetFirstRegion and GetNextRegion */
+typedef struct region_info_t {
+    u_int		Attributes;
+    u_int		CardOffset;
+    u_int		RegionSize;
+    u_int		AccessSpeed;
+    u_int		BlockSize;
+    u_int		PartMultiple;
+    u_char		JedecMfr, JedecInfo;
+    memory_handle_t	next;
+} region_info_t;
+
+#define REGION_TYPE		0x0001
+#define REGION_TYPE_CM		0x0000
+#define REGION_TYPE_AM		0x0001
+#define REGION_PREFETCH		0x0008
+#define REGION_CACHEABLE	0x0010
+#define REGION_BAR_MASK		0xe000
+#define REGION_BAR_SHIFT	13
+
+int pcmcia_get_first_region(client_handle_t handle, region_info_t *rgn);
+int pcmcia_get_next_region(client_handle_t handle, region_info_t *rgn);
+
+#endif /* _LINUX_BULKMEM_H */
diff --git a/include/pcmcia/ciscode.h b/include/pcmcia/ciscode.h
new file mode 100644
index 000000000000..2000b43ece91
--- /dev/null
+++ b/include/pcmcia/ciscode.h
@@ -0,0 +1,123 @@
+/*
+ * ciscode.h -- Definitions for bulk memory services
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999		David A. Hinds
+ */
+
+#ifndef _LINUX_CISCODE_H
+#define _LINUX_CISCODE_H
+
+/* Manufacturer and Product ID codes */
+
+#define MANFID_3COM			0x0101
+#define PRODID_3COM_3CXEM556		0x0035
+#define PRODID_3COM_3CCFEM556		0x0556
+#define PRODID_3COM_3C562		0x0562
+
+#define MANFID_ACCTON			0x01bf
+#define PRODID_ACCTON_EN2226		0x010a
+
+#define MANFID_ADAPTEC			0x012f
+#define PRODID_ADAPTEC_SCSI		0x0001
+
+#define MANFID_ATT			0xffff
+#define PRODID_ATT_KIT			0x0100
+
+#define MANFID_CONTEC			0xc001
+
+#define MANFID_FUJITSU			0x0004
+#define PRODID_FUJITSU_MBH10302		0x0004
+#define PRODID_FUJITSU_MBH10304		0x1003
+#define PRODID_FUJITSU_LA501		0x2000
+
+#define MANFID_IBM			0x00a4
+#define PRODID_IBM_HOME_AND_AWAY	0x002e
+
+#define MANFID_INTEL			0x0089
+#define PRODID_INTEL_DUAL_RS232		0x0301
+#define PRODID_INTEL_2PLUS		0x8422
+
+#define MANFID_KME			0x0032
+#define PRODID_KME_KXLC005_A		0x0704
+#define PRODID_KME_KXLC005_B		0x2904
+
+#define MANFID_LINKSYS			0x0143
+#define PRODID_LINKSYS_PCMLM28		0xc0ab
+#define PRODID_LINKSYS_3400		0x3341
+
+#define MANFID_MEGAHERTZ		0x0102
+#define PRODID_MEGAHERTZ_VARIOUS	0x0000
+#define PRODID_MEGAHERTZ_EM3288		0x0006
+
+#define MANFID_MACNICA			0xc00b
+
+#define MANFID_MOTOROLA			0x0109
+#define PRODID_MOTOROLA_MARINER		0x0501
+
+#define MANFID_NATINST			0x010b
+#define PRODID_NATINST_QUAD_RS232	0xd180
+
+#define MANFID_NEW_MEDIA		0x0057
+
+#define MANFID_NOKIA			0x0124
+#define PRODID_NOKIA_CARDPHONE		0x0900
+
+#define MANFID_OLICOM			0x0121
+#define PRODID_OLICOM_OC2231		0x3122
+#define PRODID_OLICOM_OC2232		0x3222
+
+#define MANFID_OMEGA			0x0137
+#define PRODID_OMEGA_QSP_100		0x0025
+
+#define MANFID_OSITECH			0x0140
+#define PRODID_OSITECH_JACK_144		0x0001
+#define PRODID_OSITECH_JACK_288		0x0002
+#define PRODID_OSITECH_JACK_336		0x0007
+#define PRODID_OSITECH_SEVEN		0x0008
+
+#define MANFID_OXSEMI			0x0279
+
+#define MANFID_PIONEER			0x000b
+
+#define MANFID_PSION			0x016c
+#define PRODID_PSION_NET100		0x0023
+
+#define MANFID_QUATECH			0x0137
+#define PRODID_QUATECH_SPP100		0x0003
+#define PRODID_QUATECH_DUAL_RS232	0x0012
+#define PRODID_QUATECH_DUAL_RS232_D1	0x0007
+#define PRODID_QUATECH_DUAL_RS232_D2	0x0052
+#define PRODID_QUATECH_QUAD_RS232	0x001b
+#define PRODID_QUATECH_DUAL_RS422	0x000e
+#define PRODID_QUATECH_QUAD_RS422	0x0045
+
+#define MANFID_SMC			0x0108
+#define PRODID_SMC_ETHER		0x0105
+
+#define MANFID_SOCKET			0x0104
+#define PRODID_SOCKET_DUAL_RS232	0x0006
+#define PRODID_SOCKET_EIO		0x000a
+#define PRODID_SOCKET_LPE		0x000d
+#define PRODID_SOCKET_LPE_CF		0x0075
+
+#define MANFID_SUNDISK			0x0045
+
+#define MANFID_TDK			0x0105
+#define PRODID_TDK_CF010		0x0900
+#define PRODID_TDK_GN3410		0x4815
+
+#define MANFID_TOSHIBA			0x0098
+
+#define MANFID_UNGERMANN 0x02c0
+
+#define MANFID_XIRCOM			0x0105
+
+#endif /* _LINUX_CISCODE_H */
diff --git a/include/pcmcia/cisreg.h b/include/pcmcia/cisreg.h
new file mode 100644
index 000000000000..ddaad465502e
--- /dev/null
+++ b/include/pcmcia/cisreg.h
@@ -0,0 +1,120 @@
+/*
+ * cisreg.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CISREG_H
+#define _LINUX_CISREG_H
+
+/*
+ * Offsets from ConfigBase for CIS registers
+ */
+#define CISREG_COR		0x00
+#define CISREG_CCSR		0x02
+#define CISREG_PRR		0x04
+#define CISREG_SCR		0x06
+#define CISREG_ESR		0x08
+#define CISREG_IOBASE_0		0x0a
+#define CISREG_IOBASE_1		0x0c
+#define CISREG_IOBASE_2		0x0e
+#define CISREG_IOBASE_3		0x10
+#define CISREG_IOSIZE		0x12
+
+/*
+ * Configuration Option Register
+ */
+#define COR_CONFIG_MASK		0x3f
+#define COR_MFC_CONFIG_MASK	0x38
+#define COR_FUNC_ENA		0x01
+#define COR_ADDR_DECODE		0x02
+#define COR_IREQ_ENA		0x04
+#define COR_LEVEL_REQ		0x40
+#define COR_SOFT_RESET		0x80
+
+/*
+ * Card Configuration and Status Register
+ */
+#define CCSR_INTR_ACK		0x01
+#define CCSR_INTR_PENDING	0x02
+#define CCSR_POWER_DOWN		0x04
+#define CCSR_AUDIO_ENA		0x08
+#define CCSR_IOIS8		0x20
+#define CCSR_SIGCHG_ENA		0x40
+#define CCSR_CHANGED		0x80
+
+/*
+ * Pin Replacement Register
+ */
+#define PRR_WP_STATUS		0x01
+#define PRR_READY_STATUS	0x02
+#define PRR_BVD2_STATUS		0x04
+#define PRR_BVD1_STATUS		0x08
+#define PRR_WP_EVENT		0x10
+#define PRR_READY_EVENT		0x20
+#define PRR_BVD2_EVENT		0x40
+#define PRR_BVD1_EVENT		0x80
+
+/*
+ * Socket and Copy Register
+ */
+#define SCR_SOCKET_NUM		0x0f
+#define SCR_COPY_NUM		0x70
+
+/*
+ * Extended Status Register
+ */
+#define ESR_REQ_ATTN_ENA	0x01
+#define ESR_REQ_ATTN		0x10
+
+/*
+ * CardBus Function Status Registers
+ */
+#define CBFN_EVENT		0x00
+#define CBFN_MASK		0x04
+#define CBFN_STATE		0x08
+#define CBFN_FORCE		0x0c
+
+/*
+ * These apply to all the CardBus function registers
+ */
+#define CBFN_WP			0x0001
+#define CBFN_READY		0x0002
+#define CBFN_BVD2		0x0004
+#define CBFN_BVD1		0x0008
+#define CBFN_GWAKE		0x0010
+#define CBFN_INTR		0x8000
+
+/*
+ * Extra bits in the Function Event Mask Register
+ */
+#define FEMR_BAM_ENA		0x0020
+#define FEMR_PWM_ENA		0x0040
+#define FEMR_WKUP_MASK		0x4000
+
+/*
+ * Indirect Addressing Registers for Zoomed Video: these are addresses
+ * in common memory space
+ */
+#define CISREG_ICTRL0		0x02	/* control registers */
+#define CISREG_ICTRL1		0x03
+#define CISREG_IADDR0		0x04	/* address registers */
+#define CISREG_IADDR1		0x05
+#define CISREG_IADDR2		0x06
+#define CISREG_IADDR3		0x07
+#define CISREG_IDATA0		0x08	/* data registers */
+#define CISREG_IDATA1		0x09
+
+#define ICTRL0_COMMON		0x01
+#define ICTRL0_AUTOINC		0x02
+#define ICTRL0_BYTEGRAN		0x04
+
+#endif /* _LINUX_CISREG_H */
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
new file mode 100644
index 000000000000..c6a069554fd7
--- /dev/null
+++ b/include/pcmcia/cistpl.h
@@ -0,0 +1,605 @@
+/*
+ * cistpl.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CISTPL_H
+#define _LINUX_CISTPL_H
+
+#define CISTPL_NULL		0x00
+#define CISTPL_DEVICE		0x01
+#define CISTPL_LONGLINK_CB	0x02
+#define CISTPL_INDIRECT		0x03
+#define CISTPL_CONFIG_CB	0x04
+#define CISTPL_CFTABLE_ENTRY_CB	0x05
+#define CISTPL_LONGLINK_MFC	0x06
+#define CISTPL_BAR		0x07
+#define CISTPL_PWR_MGMNT	0x08
+#define CISTPL_EXTDEVICE	0x09
+#define CISTPL_CHECKSUM		0x10
+#define CISTPL_LONGLINK_A	0x11
+#define CISTPL_LONGLINK_C	0x12
+#define CISTPL_LINKTARGET	0x13
+#define CISTPL_NO_LINK		0x14
+#define CISTPL_VERS_1		0x15
+#define CISTPL_ALTSTR		0x16
+#define CISTPL_DEVICE_A		0x17
+#define CISTPL_JEDEC_C		0x18
+#define CISTPL_JEDEC_A		0x19
+#define CISTPL_CONFIG		0x1a
+#define CISTPL_CFTABLE_ENTRY	0x1b
+#define CISTPL_DEVICE_OC	0x1c
+#define CISTPL_DEVICE_OA	0x1d
+#define CISTPL_DEVICE_GEO	0x1e
+#define CISTPL_DEVICE_GEO_A	0x1f
+#define CISTPL_MANFID		0x20
+#define CISTPL_FUNCID		0x21
+#define CISTPL_FUNCE		0x22
+#define CISTPL_SWIL		0x23
+#define CISTPL_END		0xff
+/* Layer 2 tuples */
+#define CISTPL_VERS_2		0x40
+#define CISTPL_FORMAT		0x41
+#define CISTPL_GEOMETRY		0x42
+#define CISTPL_BYTEORDER	0x43
+#define CISTPL_DATE		0x44
+#define CISTPL_BATTERY		0x45
+#define CISTPL_FORMAT_A		0x47
+/* Layer 3 tuples */
+#define CISTPL_ORG		0x46
+#define CISTPL_SPCL		0x90
+
+typedef struct cistpl_longlink_t {
+    u_int	addr;
+} cistpl_longlink_t;
+
+typedef struct cistpl_checksum_t {
+    u_short	addr;
+    u_short	len;
+    u_char	sum;
+} cistpl_checksum_t;
+
+#define CISTPL_MAX_FUNCTIONS	8
+#define CISTPL_MFC_ATTR		0x00
+#define CISTPL_MFC_COMMON	0x01
+
+typedef struct cistpl_longlink_mfc_t {
+    u_char	nfn;
+    struct {
+	u_char	space;
+	u_int	addr;
+    } fn[CISTPL_MAX_FUNCTIONS];
+} cistpl_longlink_mfc_t;
+
+#define CISTPL_MAX_ALTSTR_STRINGS	4
+
+typedef struct cistpl_altstr_t {
+    u_char	ns;
+    u_char	ofs[CISTPL_MAX_ALTSTR_STRINGS];
+    char	str[254];
+} cistpl_altstr_t;
+
+#define CISTPL_DTYPE_NULL	0x00
+#define CISTPL_DTYPE_ROM	0x01
+#define CISTPL_DTYPE_OTPROM	0x02
+#define CISTPL_DTYPE_EPROM	0x03
+#define CISTPL_DTYPE_EEPROM	0x04
+#define CISTPL_DTYPE_FLASH	0x05
+#define CISTPL_DTYPE_SRAM	0x06
+#define CISTPL_DTYPE_DRAM	0x07
+#define CISTPL_DTYPE_FUNCSPEC	0x0d
+#define CISTPL_DTYPE_EXTEND	0x0e
+
+#define CISTPL_MAX_DEVICES	4
+
+typedef struct cistpl_device_t {
+    u_char	ndev;
+    struct {
+	u_char 	type;
+	u_char	wp;
+	u_int	speed;
+	u_int	size;
+    } dev[CISTPL_MAX_DEVICES];
+} cistpl_device_t;
+
+#define CISTPL_DEVICE_MWAIT	0x01
+#define CISTPL_DEVICE_3VCC	0x02
+
+typedef struct cistpl_device_o_t {
+    u_char		flags;
+    cistpl_device_t	device;
+} cistpl_device_o_t;
+
+#define CISTPL_VERS_1_MAX_PROD_STRINGS	4
+
+typedef struct cistpl_vers_1_t {
+    u_char	major;
+    u_char	minor;
+    u_char	ns;
+    u_char	ofs[CISTPL_VERS_1_MAX_PROD_STRINGS];
+    char	str[254];
+} cistpl_vers_1_t;
+
+typedef struct cistpl_jedec_t {
+    u_char	nid;
+    struct {
+	u_char	mfr;
+	u_char	info;
+    } id[CISTPL_MAX_DEVICES];
+} cistpl_jedec_t;
+
+typedef struct cistpl_manfid_t {
+    u_short	manf;
+    u_short	card;
+} cistpl_manfid_t;
+
+#define CISTPL_FUNCID_MULTI	0x00
+#define CISTPL_FUNCID_MEMORY	0x01
+#define CISTPL_FUNCID_SERIAL	0x02
+#define CISTPL_FUNCID_PARALLEL	0x03
+#define CISTPL_FUNCID_FIXED	0x04
+#define CISTPL_FUNCID_VIDEO	0x05
+#define CISTPL_FUNCID_NETWORK	0x06
+#define CISTPL_FUNCID_AIMS	0x07
+#define CISTPL_FUNCID_SCSI	0x08
+
+#define CISTPL_SYSINIT_POST	0x01
+#define CISTPL_SYSINIT_ROM	0x02
+
+typedef struct cistpl_funcid_t {
+    u_char	func;
+    u_char	sysinit;
+} cistpl_funcid_t;
+
+typedef struct cistpl_funce_t {
+    u_char	type;
+    u_char	data[0];
+} cistpl_funce_t;
+
+/*======================================================================
+
+    Modem Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_FUNCE_SERIAL_IF		0x00
+#define CISTPL_FUNCE_SERIAL_CAP		0x01
+#define CISTPL_FUNCE_SERIAL_SERV_DATA	0x02
+#define CISTPL_FUNCE_SERIAL_SERV_FAX	0x03
+#define CISTPL_FUNCE_SERIAL_SERV_VOICE	0x04
+#define CISTPL_FUNCE_SERIAL_CAP_DATA	0x05
+#define CISTPL_FUNCE_SERIAL_CAP_FAX	0x06
+#define CISTPL_FUNCE_SERIAL_CAP_VOICE	0x07
+#define CISTPL_FUNCE_SERIAL_IF_DATA	0x08
+#define CISTPL_FUNCE_SERIAL_IF_FAX	0x09
+#define CISTPL_FUNCE_SERIAL_IF_VOICE	0x0a
+
+/* UART identification */
+#define CISTPL_SERIAL_UART_8250		0x00
+#define CISTPL_SERIAL_UART_16450	0x01
+#define CISTPL_SERIAL_UART_16550	0x02
+#define CISTPL_SERIAL_UART_8251		0x03
+#define CISTPL_SERIAL_UART_8530		0x04
+#define CISTPL_SERIAL_UART_85230	0x05
+
+/* UART capabilities */
+#define CISTPL_SERIAL_UART_SPACE	0x01
+#define CISTPL_SERIAL_UART_MARK		0x02
+#define CISTPL_SERIAL_UART_ODD		0x04
+#define CISTPL_SERIAL_UART_EVEN		0x08
+#define CISTPL_SERIAL_UART_5BIT		0x01
+#define CISTPL_SERIAL_UART_6BIT		0x02
+#define CISTPL_SERIAL_UART_7BIT		0x04
+#define CISTPL_SERIAL_UART_8BIT		0x08
+#define CISTPL_SERIAL_UART_1STOP	0x10
+#define CISTPL_SERIAL_UART_MSTOP	0x20
+#define CISTPL_SERIAL_UART_2STOP	0x40
+
+typedef struct cistpl_serial_t {
+    u_char	uart_type;
+    u_char	uart_cap_0;
+    u_char	uart_cap_1;
+} cistpl_serial_t;
+
+typedef struct cistpl_modem_cap_t {
+    u_char	flow;
+    u_char	cmd_buf;
+    u_char	rcv_buf_0, rcv_buf_1, rcv_buf_2;
+    u_char	xmit_buf_0, xmit_buf_1, xmit_buf_2;
+} cistpl_modem_cap_t;
+
+#define CISTPL_SERIAL_MOD_103		0x01
+#define CISTPL_SERIAL_MOD_V21		0x02
+#define CISTPL_SERIAL_MOD_V23		0x04
+#define CISTPL_SERIAL_MOD_V22		0x08
+#define CISTPL_SERIAL_MOD_212A		0x10
+#define CISTPL_SERIAL_MOD_V22BIS	0x20
+#define CISTPL_SERIAL_MOD_V26		0x40
+#define CISTPL_SERIAL_MOD_V26BIS	0x80
+#define CISTPL_SERIAL_MOD_V27BIS	0x01
+#define CISTPL_SERIAL_MOD_V29		0x02
+#define CISTPL_SERIAL_MOD_V32		0x04
+#define CISTPL_SERIAL_MOD_V32BIS	0x08
+#define CISTPL_SERIAL_MOD_V34		0x10
+
+#define CISTPL_SERIAL_ERR_MNP2_4	0x01
+#define CISTPL_SERIAL_ERR_V42_LAPM	0x02
+
+#define CISTPL_SERIAL_CMPR_V42BIS	0x01
+#define CISTPL_SERIAL_CMPR_MNP5		0x02
+
+#define CISTPL_SERIAL_CMD_AT1		0x01
+#define CISTPL_SERIAL_CMD_AT2		0x02
+#define CISTPL_SERIAL_CMD_AT3		0x04
+#define CISTPL_SERIAL_CMD_MNP_AT	0x08
+#define CISTPL_SERIAL_CMD_V25BIS	0x10
+#define CISTPL_SERIAL_CMD_V25A		0x20
+#define CISTPL_SERIAL_CMD_DMCL		0x40
+
+typedef struct cistpl_data_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+    u_char	modulation_0;
+    u_char	modulation_1;
+    u_char	error_control;
+    u_char	compression;
+    u_char	cmd_protocol;
+    u_char	escape;
+    u_char	encrypt;
+    u_char	misc_features;
+    u_char	ccitt_code[0];
+} cistpl_data_serv_t;
+
+typedef struct cistpl_fax_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+    u_char	modulation;
+    u_char	encrypt;
+    u_char	features_0;
+    u_char	features_1;
+    u_char	ccitt_code[0];
+} cistpl_fax_serv_t;
+
+typedef struct cistpl_voice_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+} cistpl_voice_serv_t;
+
+/*======================================================================
+
+    LAN Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_FUNCE_LAN_TECH		0x01
+#define CISTPL_FUNCE_LAN_SPEED		0x02
+#define CISTPL_FUNCE_LAN_MEDIA		0x03
+#define CISTPL_FUNCE_LAN_NODE_ID	0x04
+#define CISTPL_FUNCE_LAN_CONNECTOR	0x05
+
+/* LAN technologies */
+#define CISTPL_LAN_TECH_ARCNET		0x01
+#define CISTPL_LAN_TECH_ETHERNET	0x02
+#define CISTPL_LAN_TECH_TOKENRING	0x03
+#define CISTPL_LAN_TECH_LOCALTALK	0x04
+#define CISTPL_LAN_TECH_FDDI		0x05
+#define CISTPL_LAN_TECH_ATM		0x06
+#define CISTPL_LAN_TECH_WIRELESS	0x07
+
+typedef struct cistpl_lan_tech_t {
+    u_char	tech;
+} cistpl_lan_tech_t;
+
+typedef struct cistpl_lan_speed_t {
+    u_int	speed;
+} cistpl_lan_speed_t;
+
+/* LAN media definitions */
+#define CISTPL_LAN_MEDIA_UTP		0x01
+#define CISTPL_LAN_MEDIA_STP		0x02
+#define CISTPL_LAN_MEDIA_THIN_COAX	0x03
+#define CISTPL_LAN_MEDIA_THICK_COAX	0x04
+#define CISTPL_LAN_MEDIA_FIBER		0x05
+#define CISTPL_LAN_MEDIA_900MHZ		0x06
+#define CISTPL_LAN_MEDIA_2GHZ		0x07
+#define CISTPL_LAN_MEDIA_5GHZ		0x08
+#define CISTPL_LAN_MEDIA_DIFF_IR	0x09
+#define CISTPL_LAN_MEDIA_PTP_IR		0x0a
+
+typedef struct cistpl_lan_media_t {
+    u_char	media;
+} cistpl_lan_media_t;
+
+typedef struct cistpl_lan_node_id_t {
+    u_char	nb;
+    u_char	id[16];
+} cistpl_lan_node_id_t;
+
+typedef struct cistpl_lan_connector_t {
+    u_char	code;
+} cistpl_lan_connector_t;
+
+/*======================================================================
+
+    IDE Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_IDE_INTERFACE		0x01
+
+typedef struct cistpl_ide_interface_t {
+    u_char	interface;
+} cistpl_ide_interface_t;
+
+/* First feature byte */
+#define CISTPL_IDE_SILICON		0x04
+#define CISTPL_IDE_UNIQUE		0x08
+#define CISTPL_IDE_DUAL			0x10
+
+/* Second feature byte */
+#define CISTPL_IDE_HAS_SLEEP		0x01
+#define CISTPL_IDE_HAS_STANDBY		0x02
+#define CISTPL_IDE_HAS_IDLE		0x04
+#define CISTPL_IDE_LOW_POWER		0x08
+#define CISTPL_IDE_REG_INHIBIT		0x10
+#define CISTPL_IDE_HAS_INDEX		0x20
+#define CISTPL_IDE_IOIS16		0x40
+
+typedef struct cistpl_ide_feature_t {
+    u_char	feature1;
+    u_char	feature2;
+} cistpl_ide_feature_t;
+
+#define CISTPL_FUNCE_IDE_IFACE		0x01
+#define CISTPL_FUNCE_IDE_MASTER		0x02
+#define CISTPL_FUNCE_IDE_SLAVE		0x03
+
+/*======================================================================
+
+    Configuration Table Entries
+
+======================================================================*/
+
+#define CISTPL_BAR_SPACE	0x07
+#define CISTPL_BAR_SPACE_IO	0x10
+#define CISTPL_BAR_PREFETCH	0x20
+#define CISTPL_BAR_CACHEABLE	0x40
+#define CISTPL_BAR_1MEG_MAP	0x80
+
+typedef struct cistpl_bar_t {
+    u_char	attr;
+    u_int	size;
+} cistpl_bar_t;
+
+typedef struct cistpl_config_t {
+    u_char	last_idx;
+    u_int	base;
+    u_int	rmask[4];
+    u_char	subtuples;
+} cistpl_config_t;
+
+/* These are bits in the 'present' field, and indices in 'param' */
+#define CISTPL_POWER_VNOM	0
+#define CISTPL_POWER_VMIN	1
+#define CISTPL_POWER_VMAX	2
+#define CISTPL_POWER_ISTATIC	3
+#define CISTPL_POWER_IAVG	4
+#define CISTPL_POWER_IPEAK	5
+#define CISTPL_POWER_IDOWN	6
+
+#define CISTPL_POWER_HIGHZ_OK	0x01
+#define CISTPL_POWER_HIGHZ_REQ	0x02
+
+typedef struct cistpl_power_t {
+    u_char	present;
+    u_char	flags;
+    u_int	param[7];
+} cistpl_power_t;
+
+typedef struct cistpl_timing_t {
+    u_int	wait, waitscale;
+    u_int	ready, rdyscale;
+    u_int	reserved, rsvscale;
+} cistpl_timing_t;
+
+#define CISTPL_IO_LINES_MASK	0x1f
+#define CISTPL_IO_8BIT		0x20
+#define CISTPL_IO_16BIT		0x40
+#define CISTPL_IO_RANGE		0x80
+
+#define CISTPL_IO_MAX_WIN	16
+
+typedef struct cistpl_io_t {
+    u_char	flags;
+    u_char	nwin;
+    struct {
+	u_int	base;
+	u_int	len;
+    } win[CISTPL_IO_MAX_WIN];
+} cistpl_io_t;
+
+typedef struct cistpl_irq_t {
+    u_int	IRQInfo1;
+    u_int	IRQInfo2;
+} cistpl_irq_t;
+
+#define CISTPL_MEM_MAX_WIN	8
+
+typedef struct cistpl_mem_t {
+    u_char	flags;
+    u_char	nwin;
+    struct {
+	u_int	len;
+	u_int	card_addr;
+	u_int	host_addr;
+    } win[CISTPL_MEM_MAX_WIN];
+} cistpl_mem_t;
+
+#define CISTPL_CFTABLE_DEFAULT		0x0001
+#define CISTPL_CFTABLE_BVDS		0x0002
+#define CISTPL_CFTABLE_WP		0x0004
+#define CISTPL_CFTABLE_RDYBSY		0x0008
+#define CISTPL_CFTABLE_MWAIT		0x0010
+#define CISTPL_CFTABLE_AUDIO		0x0800
+#define CISTPL_CFTABLE_READONLY		0x1000
+#define CISTPL_CFTABLE_PWRDOWN		0x2000
+
+typedef struct cistpl_cftable_entry_t {
+    u_char		index;
+    u_short		flags;
+    u_char		interface;
+    cistpl_power_t	vcc, vpp1, vpp2;
+    cistpl_timing_t	timing;
+    cistpl_io_t		io;
+    cistpl_irq_t	irq;
+    cistpl_mem_t	mem;
+    u_char		subtuples;
+} cistpl_cftable_entry_t;
+
+#define CISTPL_CFTABLE_MASTER		0x000100
+#define CISTPL_CFTABLE_INVALIDATE	0x000200
+#define CISTPL_CFTABLE_VGA_PALETTE	0x000400
+#define CISTPL_CFTABLE_PARITY		0x000800
+#define CISTPL_CFTABLE_WAIT		0x001000
+#define CISTPL_CFTABLE_SERR		0x002000
+#define CISTPL_CFTABLE_FAST_BACK	0x004000
+#define CISTPL_CFTABLE_BINARY_AUDIO	0x010000
+#define CISTPL_CFTABLE_PWM_AUDIO	0x020000
+
+typedef struct cistpl_cftable_entry_cb_t {
+    u_char		index;
+    u_int		flags;
+    cistpl_power_t	vcc, vpp1, vpp2;
+    u_char		io;
+    cistpl_irq_t	irq;
+    u_char		mem;
+    u_char		subtuples;
+} cistpl_cftable_entry_cb_t;
+
+typedef struct cistpl_device_geo_t {
+    u_char		ngeo;
+    struct {
+	u_char		buswidth;
+	u_int		erase_block;
+	u_int		read_block;
+	u_int		write_block;
+	u_int		partition;
+	u_int		interleave;
+    } geo[CISTPL_MAX_DEVICES];
+} cistpl_device_geo_t;
+
+typedef struct cistpl_vers_2_t {
+    u_char	vers;
+    u_char	comply;
+    u_short	dindex;
+    u_char	vspec8, vspec9;
+    u_char	nhdr;
+    u_char	vendor, info;
+    char	str[244];
+} cistpl_vers_2_t;
+
+typedef struct cistpl_org_t {
+    u_char	data_org;
+    char	desc[30];
+} cistpl_org_t;
+
+#define CISTPL_ORG_FS		0x00
+#define CISTPL_ORG_APPSPEC	0x01
+#define CISTPL_ORG_XIP		0x02
+
+typedef struct cistpl_format_t {
+    u_char	type;
+    u_char	edc;
+    u_int	offset;
+    u_int	length;
+} cistpl_format_t;
+
+#define CISTPL_FORMAT_DISK	0x00
+#define CISTPL_FORMAT_MEM	0x01
+
+#define CISTPL_EDC_NONE		0x00
+#define CISTPL_EDC_CKSUM	0x01
+#define CISTPL_EDC_CRC		0x02
+#define CISTPL_EDC_PCC		0x03
+
+typedef union cisparse_t {
+    cistpl_device_t		device;
+    cistpl_checksum_t		checksum;
+    cistpl_longlink_t		longlink;
+    cistpl_longlink_mfc_t	longlink_mfc;
+    cistpl_vers_1_t		version_1;
+    cistpl_altstr_t		altstr;
+    cistpl_jedec_t		jedec;
+    cistpl_manfid_t		manfid;
+    cistpl_funcid_t		funcid;
+    cistpl_funce_t		funce;
+    cistpl_bar_t		bar;
+    cistpl_config_t		config;
+    cistpl_cftable_entry_t	cftable_entry;
+    cistpl_cftable_entry_cb_t	cftable_entry_cb;
+    cistpl_device_geo_t		device_geo;
+    cistpl_vers_2_t		vers_2;
+    cistpl_org_t		org;
+    cistpl_format_t		format;
+} cisparse_t;
+
+typedef struct tuple_t {
+    u_int	Attributes;
+    cisdata_t 	DesiredTuple;
+    u_int	Flags;		/* internal use */
+    u_int	LinkOffset;	/* internal use */
+    u_int	CISOffset;	/* internal use */
+    cisdata_t	TupleCode;
+    cisdata_t	TupleLink;
+    cisdata_t	TupleOffset;
+    cisdata_t	TupleDataMax;
+    cisdata_t	TupleDataLen;
+    cisdata_t	*TupleData;
+} tuple_t;
+
+/* Special cisdata_t value */
+#define RETURN_FIRST_TUPLE	0xff
+
+/* Attributes for tuple calls */
+#define TUPLE_RETURN_LINK	0x01
+#define TUPLE_RETURN_COMMON	0x02
+
+/* For ValidateCIS */
+typedef struct cisinfo_t {
+    u_int	Chains;
+} cisinfo_t;
+
+#define CISTPL_MAX_CIS_SIZE	0x200
+
+/* For ReplaceCIS */
+typedef struct cisdump_t {
+    u_int	Length;
+    cisdata_t	Data[CISTPL_MAX_CIS_SIZE];
+} cisdump_t;
+
+int pcmcia_get_first_tuple(client_handle_t handle, tuple_t *tuple);
+int pcmcia_get_next_tuple(client_handle_t handle, tuple_t *tuple);
+int pcmcia_get_tuple_data(client_handle_t handle, tuple_t *tuple);
+int pcmcia_parse_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse);
+
+int pcmcia_validate_cis(client_handle_t handle, cisinfo_t *info);
+int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis);
+
+/* don't use outside of PCMCIA core yet */
+int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple);
+int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple_t *tuple);
+int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
+int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse);
+
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, cisinfo_t *info);
+
+#endif /* LINUX_CISTPL_H */
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
new file mode 100644
index 000000000000..8d8643adc786
--- /dev/null
+++ b/include/pcmcia/cs.h
@@ -0,0 +1,427 @@
+/*
+ * cs.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CS_H
+#define _LINUX_CS_H
+
+/* For AccessConfigurationRegister */
+typedef struct conf_reg_t {
+    u_char	Function;
+    u_int	Action;
+    off_t	Offset;
+    u_int	Value;
+} conf_reg_t;
+
+/* Actions */
+#define CS_READ		1
+#define CS_WRITE	2
+
+/* for AdjustResourceInfo */
+typedef struct adjust_t {
+    u_int	Action;
+    u_int	Resource;
+    u_int	Attributes;
+    union {
+	struct memory {
+	    u_long	Base;
+	    u_long	Size;
+	} memory;
+	struct io {
+	    ioaddr_t	BasePort;
+	    ioaddr_t	NumPorts;
+	    u_int	IOAddrLines;
+	} io;
+	struct irq {
+	    u_int	IRQ;
+	} irq;
+    } resource;
+} adjust_t;
+
+/* Action field */
+#define REMOVE_MANAGED_RESOURCE		1
+#define ADD_MANAGED_RESOURCE		2
+#define GET_FIRST_MANAGED_RESOURCE	3
+#define GET_NEXT_MANAGED_RESOURCE	4
+/* Resource field */
+#define RES_MEMORY_RANGE		1
+#define RES_IO_RANGE			2
+#define RES_IRQ				3
+/* Attribute field */
+#define RES_IRQ_TYPE			0x03
+#define RES_IRQ_TYPE_EXCLUSIVE		0
+#define RES_IRQ_TYPE_TIME		1
+#define RES_IRQ_TYPE_DYNAMIC		2
+#define RES_IRQ_CSC			0x04
+#define RES_SHARED			0x08
+#define RES_RESERVED			0x10
+#define RES_ALLOCATED			0x20
+#define RES_REMOVED			0x40
+
+typedef struct servinfo_t {
+    char	Signature[2];
+    u_int	Count;
+    u_int	Revision;
+    u_int	CSLevel;
+    char	*VendorString;
+} servinfo_t;
+
+typedef struct event_callback_args_t {
+    client_handle_t client_handle;
+    void	*info;
+    void	*mtdrequest;
+    void	*buffer;
+    void	*misc;
+    void	*client_data;
+} event_callback_args_t;
+
+/* for GetConfigurationInfo */
+typedef struct config_info_t {
+    u_char	Function;
+    u_int	Attributes;
+    u_int	Vcc, Vpp1, Vpp2;
+    u_int	IntType;
+    u_int	ConfigBase;
+    u_char	Status, Pin, Copy, Option, ExtStatus;
+    u_int	Present;
+    u_int	CardValues;
+    u_int	AssignedIRQ;
+    u_int	IRQAttributes;
+    ioaddr_t	BasePort1;
+    ioaddr_t	NumPorts1;
+    u_int	Attributes1;
+    ioaddr_t	BasePort2;
+    ioaddr_t	NumPorts2;
+    u_int	Attributes2;
+    u_int	IOAddrLines;
+} config_info_t;
+
+/* For CardValues field */
+#define CV_OPTION_VALUE		0x01
+#define CV_STATUS_VALUE		0x02
+#define CV_PIN_REPLACEMENT	0x04
+#define CV_COPY_VALUE		0x08
+#define CV_EXT_STATUS		0x10
+
+/* For GetFirst/NextClient */
+typedef struct client_req_t {
+    socket_t	Socket;
+    u_int	Attributes;
+} client_req_t;
+
+#define CLIENT_THIS_SOCKET	0x01
+
+/* For RegisterClient */
+typedef struct client_reg_t {
+    dev_info_t	*dev_info;
+    u_int	Attributes;  /* UNUSED */
+    u_int	EventMask;
+    int		(*event_handler)(event_t event, int priority,
+				 event_callback_args_t *);
+    event_callback_args_t event_callback_args;
+    u_int	Version;
+} client_reg_t;
+
+/* ModifyConfiguration */
+typedef struct modconf_t {
+    u_int	Attributes;
+    u_int	Vcc, Vpp1, Vpp2;
+} modconf_t;
+
+/* Attributes for ModifyConfiguration */
+#define CONF_IRQ_CHANGE_VALID	0x100
+#define CONF_VCC_CHANGE_VALID	0x200
+#define CONF_VPP1_CHANGE_VALID	0x400
+#define CONF_VPP2_CHANGE_VALID	0x800
+
+/* For RequestConfiguration */
+typedef struct config_req_t {
+    u_int	Attributes;
+    u_int	Vcc, Vpp1, Vpp2;
+    u_int	IntType;
+    u_int	ConfigBase;
+    u_char	Status, Pin, Copy, ExtStatus;
+    u_char	ConfigIndex;
+    u_int	Present;
+} config_req_t;
+
+/* Attributes for RequestConfiguration */
+#define CONF_ENABLE_IRQ		0x01
+#define CONF_ENABLE_DMA		0x02
+#define CONF_ENABLE_SPKR	0x04
+#define CONF_VALID_CLIENT	0x100
+
+/* IntType field */
+#define INT_MEMORY		0x01
+#define INT_MEMORY_AND_IO	0x02
+#define INT_CARDBUS		0x04
+#define INT_ZOOMED_VIDEO	0x08
+
+/* For RequestIO and ReleaseIO */
+typedef struct io_req_t {
+    ioaddr_t	BasePort1;
+    ioaddr_t	NumPorts1;
+    u_int	Attributes1;
+    ioaddr_t	BasePort2;
+    ioaddr_t	NumPorts2;
+    u_int	Attributes2;
+    u_int	IOAddrLines;
+} io_req_t;
+
+/* Attributes for RequestIO and ReleaseIO */
+#define IO_SHARED		0x01
+#define IO_FIRST_SHARED		0x02
+#define IO_FORCE_ALIAS_ACCESS	0x04
+#define IO_DATA_PATH_WIDTH	0x18
+#define IO_DATA_PATH_WIDTH_8	0x00
+#define IO_DATA_PATH_WIDTH_16	0x08
+#define IO_DATA_PATH_WIDTH_AUTO	0x10
+
+/* For RequestIRQ and ReleaseIRQ */
+typedef struct irq_req_t {
+    u_int	Attributes;
+    u_int	AssignedIRQ;
+    u_int	IRQInfo1, IRQInfo2; /* IRQInfo2 is ignored */
+    void	*Handler;
+    void	*Instance;
+} irq_req_t;
+
+/* Attributes for RequestIRQ and ReleaseIRQ */
+#define IRQ_TYPE			0x03
+#define IRQ_TYPE_EXCLUSIVE		0x00
+#define IRQ_TYPE_TIME			0x01
+#define IRQ_TYPE_DYNAMIC_SHARING	0x02
+#define IRQ_FORCED_PULSE		0x04
+#define IRQ_FIRST_SHARED		0x08
+#define IRQ_HANDLE_PRESENT		0x10
+#define IRQ_PULSE_ALLOCATED		0x100
+
+/* Bits in IRQInfo1 field */
+#define IRQ_MASK		0x0f
+#define IRQ_NMI_ID		0x01
+#define IRQ_IOCK_ID		0x02
+#define IRQ_BERR_ID		0x04
+#define IRQ_VEND_ID		0x08
+#define IRQ_INFO2_VALID		0x10
+#define IRQ_LEVEL_ID		0x20
+#define IRQ_PULSE_ID		0x40
+#define IRQ_SHARE_ID		0x80
+
+typedef struct eventmask_t {
+    u_int	Attributes;
+    u_int	EventMask;
+} eventmask_t;
+
+#define CONF_EVENT_MASK_VALID	0x01
+
+/* Configuration registers present */
+#define PRESENT_OPTION		0x001
+#define PRESENT_STATUS		0x002
+#define PRESENT_PIN_REPLACE	0x004
+#define PRESENT_COPY		0x008
+#define PRESENT_EXT_STATUS	0x010
+#define PRESENT_IOBASE_0	0x020
+#define PRESENT_IOBASE_1	0x040
+#define PRESENT_IOBASE_2	0x080
+#define PRESENT_IOBASE_3	0x100
+#define PRESENT_IOSIZE		0x200
+
+/* For GetMemPage, MapMemPage */
+typedef struct memreq_t {
+    u_int	CardOffset;
+    page_t	Page;
+} memreq_t;
+
+/* For ModifyWindow */
+typedef struct modwin_t {
+    u_int	Attributes;
+    u_int	AccessSpeed;
+} modwin_t;
+
+/* For RequestWindow */
+typedef struct win_req_t {
+    u_int	Attributes;
+    u_long	Base;
+    u_int	Size;
+    u_int	AccessSpeed;
+} win_req_t;
+
+/* Attributes for RequestWindow */
+#define WIN_ADDR_SPACE		0x0001
+#define WIN_ADDR_SPACE_MEM	0x0000
+#define WIN_ADDR_SPACE_IO	0x0001
+#define WIN_MEMORY_TYPE		0x0002
+#define WIN_MEMORY_TYPE_CM	0x0000
+#define WIN_MEMORY_TYPE_AM	0x0002
+#define WIN_ENABLE		0x0004
+#define WIN_DATA_WIDTH		0x0018
+#define WIN_DATA_WIDTH_8	0x0000
+#define WIN_DATA_WIDTH_16	0x0008
+#define WIN_DATA_WIDTH_32	0x0010
+#define WIN_PAGED		0x0020
+#define WIN_SHARED		0x0040
+#define WIN_FIRST_SHARED	0x0080
+#define WIN_USE_WAIT		0x0100
+#define WIN_STRICT_ALIGN	0x0200
+#define WIN_MAP_BELOW_1MB	0x0400
+#define WIN_PREFETCH		0x0800
+#define WIN_CACHEABLE		0x1000
+#define WIN_BAR_MASK		0xe000
+#define WIN_BAR_SHIFT		13
+
+/* Attributes for RegisterClient -- UNUSED -- */
+#define INFO_MASTER_CLIENT	0x01
+#define INFO_IO_CLIENT		0x02
+#define INFO_MTD_CLIENT		0x04
+#define INFO_MEM_CLIENT		0x08
+#define MAX_NUM_CLIENTS		3
+
+#define INFO_CARD_SHARE		0x10
+#define INFO_CARD_EXCL		0x20
+
+typedef struct cs_status_t {
+    u_char	Function;
+    event_t 	CardState;
+    event_t	SocketState;
+} cs_status_t;
+
+typedef struct error_info_t {
+    int		func;
+    int		retcode;
+} error_info_t;
+
+/* Flag to bind to all functions */
+#define BIND_FN_ALL	0xff
+
+/* Events */
+#define CS_EVENT_PRI_LOW		0
+#define CS_EVENT_PRI_HIGH		1
+
+#define CS_EVENT_WRITE_PROTECT		0x000001
+#define CS_EVENT_CARD_LOCK		0x000002
+#define CS_EVENT_CARD_INSERTION		0x000004
+#define CS_EVENT_CARD_REMOVAL		0x000008
+#define CS_EVENT_BATTERY_DEAD		0x000010
+#define CS_EVENT_BATTERY_LOW		0x000020
+#define CS_EVENT_READY_CHANGE		0x000040
+#define CS_EVENT_CARD_DETECT		0x000080
+#define CS_EVENT_RESET_REQUEST		0x000100
+#define CS_EVENT_RESET_PHYSICAL		0x000200
+#define CS_EVENT_CARD_RESET		0x000400
+#define CS_EVENT_REGISTRATION_COMPLETE	0x000800
+#define CS_EVENT_PM_SUSPEND		0x002000
+#define CS_EVENT_PM_RESUME		0x004000
+#define CS_EVENT_INSERTION_REQUEST	0x008000
+#define CS_EVENT_EJECTION_REQUEST	0x010000
+#define CS_EVENT_MTD_REQUEST		0x020000
+#define CS_EVENT_ERASE_COMPLETE		0x040000
+#define CS_EVENT_REQUEST_ATTENTION	0x080000
+#define CS_EVENT_CB_DETECT		0x100000
+#define CS_EVENT_3VCARD			0x200000
+#define CS_EVENT_XVCARD			0x400000
+
+/* Return codes */
+#define CS_SUCCESS		0x00
+#define CS_BAD_ADAPTER		0x01
+#define CS_BAD_ATTRIBUTE	0x02
+#define CS_BAD_BASE		0x03
+#define CS_BAD_EDC		0x04
+#define CS_BAD_IRQ		0x06
+#define CS_BAD_OFFSET		0x07
+#define CS_BAD_PAGE		0x08
+#define CS_READ_FAILURE		0x09
+#define CS_BAD_SIZE		0x0a
+#define CS_BAD_SOCKET		0x0b
+#define CS_BAD_TYPE		0x0d
+#define CS_BAD_VCC		0x0e
+#define CS_BAD_VPP		0x0f
+#define CS_BAD_WINDOW		0x11
+#define CS_WRITE_FAILURE	0x12
+#define CS_NO_CARD		0x14
+#define CS_UNSUPPORTED_FUNCTION	0x15
+#define CS_UNSUPPORTED_MODE	0x16
+#define CS_BAD_SPEED		0x17
+#define CS_BUSY			0x18
+#define CS_GENERAL_FAILURE	0x19
+#define CS_WRITE_PROTECTED	0x1a
+#define CS_BAD_ARG_LENGTH	0x1b
+#define CS_BAD_ARGS		0x1c
+#define CS_CONFIGURATION_LOCKED	0x1d
+#define CS_IN_USE		0x1e
+#define CS_NO_MORE_ITEMS	0x1f
+#define CS_OUT_OF_RESOURCE	0x20
+#define CS_BAD_HANDLE		0x21
+
+#define CS_BAD_TUPLE		0x40
+
+#ifdef __KERNEL__
+
+/*
+ *  The main Card Services entry point
+ */
+
+enum service {
+    AccessConfigurationRegister, AddSocketServices,
+    AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
+    DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
+    GetClientInfo, GetConfigurationInfo, GetEventMask,
+    GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
+    GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
+    GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
+    MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
+    OpenMemory, ParseTuple, ReadMemory, RegisterClient,
+    RegisterEraseQueue, RegisterMTD, RegisterTimer,
+    ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
+    ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
+    RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
+    RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
+    SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
+    WriteMemory, BindDevice, BindMTD, ReportError,
+    SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
+    GetFirstWindow, GetNextWindow, GetMemPage
+};
+
+struct pcmcia_socket;
+
+int pcmcia_access_configuration_register(client_handle_t handle, conf_reg_t *reg);
+int pcmcia_deregister_client(client_handle_t handle);
+int pcmcia_get_configuration_info(client_handle_t handle, config_info_t *config);
+int pcmcia_get_card_services_info(servinfo_t *info);
+int pcmcia_get_first_window(window_handle_t *win, win_req_t *req);
+int pcmcia_get_next_window(window_handle_t *win, win_req_t *req);
+int pcmcia_get_status(client_handle_t handle, cs_status_t *status);
+int pcmcia_get_mem_page(window_handle_t win, memreq_t *req);
+int pcmcia_map_mem_page(window_handle_t win, memreq_t *req);
+int pcmcia_modify_configuration(client_handle_t handle, modconf_t *mod);
+int pcmcia_register_client(client_handle_t *handle, client_reg_t *req);
+int pcmcia_release_configuration(client_handle_t handle);
+int pcmcia_release_io(client_handle_t handle, io_req_t *req);
+int pcmcia_release_irq(client_handle_t handle, irq_req_t *req);
+int pcmcia_release_window(window_handle_t win);
+int pcmcia_request_configuration(client_handle_t handle, config_req_t *req);
+int pcmcia_request_io(client_handle_t handle, io_req_t *req);
+int pcmcia_request_irq(client_handle_t handle, irq_req_t *req);
+int pcmcia_request_window(client_handle_t *handle, win_req_t *req, window_handle_t *wh);
+int pcmcia_reset_card(client_handle_t handle, client_req_t *req);
+int pcmcia_suspend_card(struct pcmcia_socket *skt);
+int pcmcia_resume_card(struct pcmcia_socket *skt);
+int pcmcia_eject_card(struct pcmcia_socket *skt);
+int pcmcia_insert_card(struct pcmcia_socket *skt);
+int pcmcia_report_error(client_handle_t handle, error_info_t *err);
+
+struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt);
+void pcmcia_put_socket(struct pcmcia_socket *skt);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_CS_H */
diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
new file mode 100644
index 000000000000..7881d40aac8d
--- /dev/null
+++ b/include/pcmcia/cs_types.h
@@ -0,0 +1,52 @@
+/*
+ * cs_types.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CS_TYPES_H
+#define _LINUX_CS_TYPES_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <sys/types.h>
+#endif
+
+#if defined(__arm__) || defined(__mips__)
+/* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
+typedef u_int   ioaddr_t;
+#else
+typedef u_short	ioaddr_t;
+#endif
+typedef unsigned long kio_addr_t;
+
+typedef u_short	socket_t;
+typedef u_int	event_t;
+typedef u_char	cisdata_t;
+typedef u_short	page_t;
+
+struct client_t;
+typedef struct client_t *client_handle_t;
+
+struct window_t;
+typedef struct window_t *window_handle_t;
+
+struct region_t;
+typedef struct region_t *memory_handle_t;
+
+#ifndef DEV_NAME_LEN
+#define DEV_NAME_LEN 32
+#endif
+
+typedef char dev_info_t[DEV_NAME_LEN];
+
+#endif /* _LINUX_CS_TYPES_H */
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
new file mode 100644
index 000000000000..312fd958c901
--- /dev/null
+++ b/include/pcmcia/ds.h
@@ -0,0 +1,200 @@
+/*
+ * ds.h -- 16-bit PCMCIA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999		David A. Hinds
+ * (C) 2003 - 2004	Dominik Brodowski
+ */
+
+#ifndef _LINUX_DS_H
+#define _LINUX_DS_H
+
+#include <pcmcia/bulkmem.h>
+#include <pcmcia/cs_types.h>
+
+typedef struct tuple_parse_t {
+    tuple_t		tuple;
+    cisdata_t		data[255];
+    cisparse_t		parse;
+} tuple_parse_t;
+
+typedef struct win_info_t {
+    window_handle_t	handle;
+    win_req_t		window;
+    memreq_t		map;
+} win_info_t;
+    
+typedef struct bind_info_t {
+    dev_info_t		dev_info;
+    u_char		function;
+    struct dev_link_t	*instance;
+    char		name[DEV_NAME_LEN];
+    u_short		major, minor;
+    void		*next;
+} bind_info_t;
+
+typedef struct mtd_info_t {
+    dev_info_t		dev_info;
+    u_int		Attributes;
+    u_int		CardOffset;
+} mtd_info_t;
+
+typedef union ds_ioctl_arg_t {
+    servinfo_t		servinfo;
+    adjust_t		adjust;
+    config_info_t	config;
+    tuple_t		tuple;
+    tuple_parse_t	tuple_parse;
+    client_req_t	client_req;
+    cs_status_t		status;
+    conf_reg_t		conf_reg;
+    cisinfo_t		cisinfo;
+    region_info_t	region;
+    bind_info_t		bind_info;
+    mtd_info_t		mtd_info;
+    win_info_t		win_info;
+    cisdump_t		cisdump;
+} ds_ioctl_arg_t;
+
+#define DS_GET_CARD_SERVICES_INFO	_IOR ('d', 1, servinfo_t)
+#define DS_ADJUST_RESOURCE_INFO		_IOWR('d', 2, adjust_t)
+#define DS_GET_CONFIGURATION_INFO	_IOWR('d', 3, config_info_t)
+#define DS_GET_FIRST_TUPLE		_IOWR('d', 4, tuple_t)
+#define DS_GET_NEXT_TUPLE		_IOWR('d', 5, tuple_t)
+#define DS_GET_TUPLE_DATA		_IOWR('d', 6, tuple_parse_t)
+#define DS_PARSE_TUPLE			_IOWR('d', 7, tuple_parse_t)
+#define DS_RESET_CARD			_IO  ('d', 8)
+#define DS_GET_STATUS			_IOWR('d', 9, cs_status_t)
+#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
+#define DS_VALIDATE_CIS			_IOR ('d', 11, cisinfo_t)
+#define DS_SUSPEND_CARD			_IO  ('d', 12)
+#define DS_RESUME_CARD			_IO  ('d', 13)
+#define DS_EJECT_CARD			_IO  ('d', 14)
+#define DS_INSERT_CARD			_IO  ('d', 15)
+#define DS_GET_FIRST_REGION		_IOWR('d', 16, region_info_t)
+#define DS_GET_NEXT_REGION		_IOWR('d', 17, region_info_t)
+#define DS_REPLACE_CIS			_IOWR('d', 18, cisdump_t)
+#define DS_GET_FIRST_WINDOW		_IOR ('d', 19, win_info_t)
+#define DS_GET_NEXT_WINDOW		_IOWR('d', 20, win_info_t)
+#define DS_GET_MEM_PAGE			_IOWR('d', 21, win_info_t)
+
+#define DS_BIND_REQUEST			_IOWR('d', 60, bind_info_t)
+#define DS_GET_DEVICE_INFO		_IOWR('d', 61, bind_info_t) 
+#define DS_GET_NEXT_DEVICE		_IOWR('d', 62, bind_info_t) 
+#define DS_UNBIND_REQUEST		_IOW ('d', 63, bind_info_t)
+#define DS_BIND_MTD			_IOWR('d', 64, mtd_info_t)
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+
+typedef struct dev_node_t {
+    char		dev_name[DEV_NAME_LEN];
+    u_short		major, minor;
+    struct dev_node_t	*next;
+} dev_node_t;
+
+typedef struct dev_link_t {
+    dev_node_t		*dev;
+    u_int		state, open;
+    wait_queue_head_t	pending;
+    client_handle_t	handle;
+    io_req_t		io;
+    irq_req_t		irq;
+    config_req_t	conf;
+    window_handle_t	win;
+    void		*priv;
+    struct dev_link_t	*next;
+} dev_link_t;
+
+/* Flags for device state */
+#define DEV_PRESENT		0x01
+#define DEV_CONFIG		0x02
+#define DEV_STALE_CONFIG	0x04	/* release on close */
+#define DEV_STALE_LINK		0x08	/* detach on release */
+#define DEV_CONFIG_PENDING	0x10
+#define DEV_RELEASE_PENDING	0x20
+#define DEV_SUSPEND		0x40
+#define DEV_BUSY		0x80
+
+#define DEV_OK(l) \
+    ((l) && ((l->state & ~DEV_BUSY) == (DEV_CONFIG|DEV_PRESENT)))
+
+
+struct pcmcia_socket;
+
+extern struct bus_type pcmcia_bus_type;
+
+struct pcmcia_driver {
+	dev_link_t		*(*attach)(void);
+	void			(*detach)(dev_link_t *);
+	struct module		*owner;
+	struct device_driver	drv;
+};
+
+/* driver registration */
+int pcmcia_register_driver(struct pcmcia_driver *driver);
+void pcmcia_unregister_driver(struct pcmcia_driver *driver);
+
+struct pcmcia_device {
+	/* the socket and the device_no [for multifunction devices]
+	   uniquely define a pcmcia_device */
+	struct pcmcia_socket	*socket;
+
+	u8			device_no;
+
+	/* the hardware "function" device; certain subdevices can
+	 * share one hardware "function" device. */
+	u8			func;
+
+	struct list_head	socket_device_list;
+
+	/* deprecated, a cleaned up version will be moved into this
+	   struct soon */
+	dev_link_t		*instance;
+	struct client_t {
+		u_short			client_magic;
+		struct pcmcia_socket	*Socket;
+		u_char			Function;
+		u_int			state;
+		event_t			EventMask;
+		int (*event_handler)	(event_t event, int priority,
+					 event_callback_args_t *);
+		event_callback_args_t 	event_callback_args;
+	}			client;
+
+	/* information about this device */
+	u8			has_manf_id:1;
+	u8			has_card_id:1;
+	u8			has_func_id:1;
+	u8			reserved:5;
+
+	u8			func_id;
+	u16			manf_id;
+	u16			card_id;
+
+	char *			prod_id[4];
+
+	/* device driver wanted by cardmgr */
+	struct pcmcia_driver *	cardmgr;
+
+	struct device		dev;
+};
+
+#define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
+#define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv)
+
+#define handle_to_pdev(handle) container_of(handle, struct pcmcia_device, client);
+#define handle_to_dev(handle) ((container_of(handle, struct pcmcia_device, client))->dev)
+
+/* error reporting */
+void cs_error(client_handle_t handle, int func, int ret);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_DS_H */
diff --git a/include/pcmcia/mem_op.h b/include/pcmcia/mem_op.h
new file mode 100644
index 000000000000..8d19b9401a5b
--- /dev/null
+++ b/include/pcmcia/mem_op.h
@@ -0,0 +1,116 @@
+/*
+ * mem_op.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_MEM_OP_H
+#define _LINUX_MEM_OP_H
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/*
+   If UNSAFE_MEMCPY is defined, we use the (optimized) system routines
+   to copy between a card and kernel memory.  These routines do 32-bit
+   operations which may not work with all PCMCIA controllers.  The
+   safe versions defined here will do only 8-bit and 16-bit accesses.
+*/
+
+#ifdef UNSAFE_MEMCPY
+
+#define copy_from_pc memcpy_fromio
+#define copy_to_pc memcpy_toio
+
+static inline void copy_pc_to_user(void *to, const void *from, size_t n)
+{
+    size_t odd = (n & 3);
+    n -= odd;
+    while (n) {
+	put_user(__raw_readl(from), (int *)to);
+	(char *)from += 4; (char *)to += 4; n -= 4;
+    }
+    while (odd--)
+	put_user(readb((char *)from++), (char *)to++);
+}
+
+static inline void copy_user_to_pc(void *to, const void *from, size_t n)
+{
+    int l;
+    char c;
+    size_t odd = (n & 3);
+    n -= odd;
+    while (n) {
+	get_user(l, (int *)from);
+	__raw_writel(l, to);
+	(char *)to += 4; (char *)from += 4; n -= 4;
+    }
+    while (odd--) {
+	get_user(c, (char *)from++);
+	writeb(c, (char *)to++);
+    }
+}
+
+#else /* UNSAFE_MEMCPY */
+
+static inline void copy_from_pc(void *to, void __iomem *from, size_t n)
+{
+	__u16 *t = to;
+	__u16 __iomem *f = from;
+	size_t odd = (n & 1);
+	for (n >>= 1; n; n--)
+		*t++ = __raw_readw(f++);
+	if (odd)
+		*(__u8 *)t = readb(f);
+}
+
+static inline void copy_to_pc(void __iomem *to, const void *from, size_t n)
+{
+	__u16 __iomem *t = to;
+	const __u16 *f = from;
+	size_t odd = (n & 1);
+	for (n >>= 1; n ; n--)
+		__raw_writew(*f++, t++);
+	if (odd)
+		writeb(*(__u8 *)f, t);
+}
+
+static inline void copy_pc_to_user(void __user *to, void __iomem *from, size_t n)
+{
+	__u16 __user *t = to;
+	__u16 __iomem *f = from;
+	size_t odd = (n & 1);
+	for (n >>= 1; n ; n--)
+		put_user(__raw_readw(f++), t++);
+	if (odd)
+		put_user(readb(f), (char __user *)t);
+}
+
+static inline void copy_user_to_pc(void __iomem *to, void __user *from, size_t n)
+{
+	__u16 __user *f = from;
+	__u16 __iomem *t = to;
+	short s;
+	char c;
+	size_t odd = (n & 1);
+	for (n >>= 1; n; n--) {
+		get_user(s, f++);
+		__raw_writew(s, t++);
+	}
+	if (odd) {
+		get_user(c, (char __user *)f);
+		writeb(c, t);
+	}
+}
+
+#endif /* UNSAFE_MEMCPY */
+
+#endif /* _LINUX_MEM_OP_H */
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
new file mode 100644
index 000000000000..6d3413a56708
--- /dev/null
+++ b/include/pcmcia/ss.h
@@ -0,0 +1,265 @@
+/*
+ * ss.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_SS_H
+#define _LINUX_SS_H
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/bulkmem.h>
+#include <linux/device.h>
+
+/* Definitions for card status flags for GetStatus */
+#define SS_WRPROT	0x0001
+#define SS_CARDLOCK	0x0002
+#define SS_EJECTION	0x0004
+#define SS_INSERTION	0x0008
+#define SS_BATDEAD	0x0010
+#define SS_BATWARN	0x0020
+#define SS_READY	0x0040
+#define SS_DETECT	0x0080
+#define SS_POWERON	0x0100
+#define SS_GPI		0x0200
+#define SS_STSCHG	0x0400
+#define SS_CARDBUS	0x0800
+#define SS_3VCARD	0x1000
+#define SS_XVCARD	0x2000
+#define SS_PENDING	0x4000
+#define SS_ZVCARD	0x8000
+
+/* InquireSocket capabilities */
+#define SS_CAP_PAGE_REGS	0x0001
+#define SS_CAP_VIRTUAL_BUS	0x0002
+#define SS_CAP_MEM_ALIGN	0x0004
+#define SS_CAP_STATIC_MAP	0x0008
+#define SS_CAP_PCCARD		0x4000
+#define SS_CAP_CARDBUS		0x8000
+
+/* for GetSocket, SetSocket */
+typedef struct socket_state_t {
+    u_int	flags;
+    u_int	csc_mask;
+    u_char	Vcc, Vpp;
+    u_char	io_irq;
+} socket_state_t;
+
+extern socket_state_t dead_socket;
+
+/* Socket configuration flags */
+#define SS_PWR_AUTO	0x0010
+#define SS_IOCARD	0x0020
+#define SS_RESET	0x0040
+#define SS_DMA_MODE	0x0080
+#define SS_SPKR_ENA	0x0100
+#define SS_OUTPUT_ENA	0x0200
+
+/* Flags for I/O port and memory windows */
+#define MAP_ACTIVE	0x01
+#define MAP_16BIT	0x02
+#define MAP_AUTOSZ	0x04
+#define MAP_0WS		0x08
+#define MAP_WRPROT	0x10
+#define MAP_ATTRIB	0x20
+#define MAP_USE_WAIT	0x40
+#define MAP_PREFETCH	0x80
+
+/* Use this just for bridge windows */
+#define MAP_IOSPACE	0x20
+
+typedef struct pccard_io_map {
+    u_char	map;
+    u_char	flags;
+    u_short	speed;
+    kio_addr_t	start, stop;
+} pccard_io_map;
+
+typedef struct pccard_mem_map {
+    u_char	map;
+    u_char	flags;
+    u_short	speed;
+    u_long	static_start;
+    u_int	card_start;
+    struct resource *res;
+} pccard_mem_map;
+
+typedef struct cb_bridge_map {
+    u_char	map;
+    u_char	flags;
+    u_int	start, stop;
+} cb_bridge_map;
+
+/*
+ * Socket operations.
+ */
+struct pcmcia_socket;
+
+struct pccard_operations {
+	int (*init)(struct pcmcia_socket *sock);
+	int (*suspend)(struct pcmcia_socket *sock);
+	int (*register_callback)(struct pcmcia_socket *sock, void (*handler)(void *, unsigned int), void * info);
+	int (*get_status)(struct pcmcia_socket *sock, u_int *value);
+	int (*get_socket)(struct pcmcia_socket *sock, socket_state_t *state);
+	int (*set_socket)(struct pcmcia_socket *sock, socket_state_t *state);
+	int (*set_io_map)(struct pcmcia_socket *sock, struct pccard_io_map *io);
+	int (*set_mem_map)(struct pcmcia_socket *sock, struct pccard_mem_map *mem);
+};
+
+struct pccard_resource_ops {
+	void	(*validate_mem)		(struct pcmcia_socket *s);
+	int	(*adjust_io_region)	(struct resource *res,
+					 unsigned long r_start,
+					 unsigned long r_end,
+					 struct pcmcia_socket *s);
+	struct resource* (*find_io)	(unsigned long base, int num,
+					 unsigned long align,
+					 struct pcmcia_socket *s);
+	struct resource* (*find_mem)	(unsigned long base, unsigned long num,
+					 unsigned long align, int low,
+					 struct pcmcia_socket *s);
+	int	(*adjust_resource)	(struct pcmcia_socket *s,
+					 adjust_t *adj);
+	int	(*init)			(struct pcmcia_socket *s);
+	void	(*exit)			(struct pcmcia_socket *s);
+};
+/* SS_CAP_STATIC_MAP */
+extern struct pccard_resource_ops pccard_static_ops;
+/* !SS_CAP_STATIC_MAP */
+extern struct pccard_resource_ops pccard_nonstatic_ops;
+
+/*
+ *  Calls to set up low-level "Socket Services" drivers
+ */
+struct pcmcia_socket;
+
+typedef struct io_window_t {
+	u_int			Attributes;
+	kio_addr_t		BasePort, NumPorts;
+	kio_addr_t		InUse, Config;
+	struct resource		*res;
+} io_window_t;
+
+#define WINDOW_MAGIC	0xB35C
+typedef struct window_t {
+	u_short			magic;
+	u_short			index;
+	client_handle_t		handle;
+	struct pcmcia_socket 	*sock;
+	pccard_mem_map		ctl;
+} window_t;
+
+/* Maximum number of IO windows per socket */
+#define MAX_IO_WIN 2
+
+/* Maximum number of memory windows per socket */
+#define MAX_WIN 4
+
+struct config_t;
+struct pcmcia_callback;
+
+
+struct pcmcia_socket {
+	struct module			*owner;
+	spinlock_t			lock;
+	socket_state_t			socket;
+	u_int				state;
+	u_short				functions;
+	u_short				lock_count;
+	pccard_mem_map			cis_mem;
+	void __iomem 			*cis_virt;
+	struct config_t			*config;
+	struct {
+		u_int			AssignedIRQ;
+		u_int			Config;
+	} irq;
+	io_window_t			io[MAX_IO_WIN];
+	window_t			win[MAX_WIN];
+	struct list_head		cis_cache;
+	u_int				fake_cis_len;
+	char				*fake_cis;
+
+	struct list_head		socket_list;
+	struct completion		socket_released;
+
+ 	/* deprecated */
+	unsigned int			sock;		/* socket number */
+
+
+	/* socket capabilities */
+	u_int				features;
+	u_int				irq_mask;
+	u_int				map_size;
+	kio_addr_t			io_offset;
+	u_char				pci_irq;
+	struct pci_dev *		cb_dev;
+
+
+	/* socket setup is done so resources should be able to be allocated. Only
+	 * if set to 1, calls to find_{io,mem}_region are handled, and insertion
+	 * events are actually managed by the PCMCIA layer.*/
+	u8				resource_setup_done:1;
+
+	/* is set to one if resource setup is done using adjust_resource_info() */
+	u8				resource_setup_old:1;
+
+	u8				reserved:6;
+
+	/* socket operations */
+	struct pccard_operations *	ops;
+	struct pccard_resource_ops *	resource_ops;
+	void *				resource_data;
+
+	/* Zoom video behaviour is so chip specific its not worth adding
+	   this to _ops */
+	void 				(*zoom_video)(struct pcmcia_socket *, int);
+                           
+	/* state thread */
+	struct semaphore		skt_sem;	/* protects socket h/w state */
+
+	struct task_struct		*thread;
+	struct completion		thread_done;
+	wait_queue_head_t		thread_wait;
+	spinlock_t			thread_lock;	/* protects thread_events */
+	unsigned int			thread_events;
+
+	/* pcmcia (16-bit) */
+	struct pcmcia_bus_socket	*pcmcia;
+	struct pcmcia_callback		*callback;
+
+	/* cardbus (32-bit) */
+#ifdef CONFIG_CARDBUS
+	struct resource *		cb_cis_res;
+	void __iomem			*cb_cis_virt;
+#endif
+
+	/* socket device */
+	struct class_device		dev;
+	void				*driver_data;	/* data internal to the socket driver */
+
+};
+
+struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr);
+
+
+
+extern void pcmcia_parse_events(struct pcmcia_socket *socket, unsigned int events);
+extern int pcmcia_register_socket(struct pcmcia_socket *socket);
+extern void pcmcia_unregister_socket(struct pcmcia_socket *socket);
+
+extern struct class pcmcia_socket_class;
+
+/* socket drivers are expected to use these callbacks in their .drv struct */
+extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_resume(struct device *dev);
+
+#endif /* _LINUX_SS_H */
diff --git a/include/pcmcia/version.h b/include/pcmcia/version.h
new file mode 100644
index 000000000000..eb88263fc8d5
--- /dev/null
+++ b/include/pcmcia/version.h
@@ -0,0 +1,4 @@
+/* version.h 1.94 2000/10/03 17:55:48 (David Hinds) */
+
+#define CS_RELEASE "3.1.22"
+#define CS_RELEASE_CODE 0x3116
diff --git a/include/rxrpc/call.h b/include/rxrpc/call.h
new file mode 100644
index 000000000000..f48f27e9e0ab
--- /dev/null
+++ b/include/rxrpc/call.h
@@ -0,0 +1,212 @@
+/* call.h: Rx call record
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_CALL_H
+#define _LINUX_RXRPC_CALL_H
+
+#include <rxrpc/types.h>
+#include <rxrpc/rxrpc.h>
+#include <rxrpc/packet.h>
+#include <linux/timer.h>
+
+#define RXRPC_CALL_ACK_WINDOW_SIZE	16
+
+extern unsigned rxrpc_call_rcv_timeout;		/* receive activity timeout (secs) */
+
+/* application call state
+ * - only state 0 and ffff are reserved, the state is set to 1 after an opid is received
+ */
+enum rxrpc_app_cstate {
+	RXRPC_CSTATE_COMPLETE		= 0,	/* operation complete */
+	RXRPC_CSTATE_ERROR,			/* operation ICMP error or aborted */
+	RXRPC_CSTATE_SRVR_RCV_OPID,		/* [SERVER] receiving operation ID */
+	RXRPC_CSTATE_SRVR_RCV_ARGS,		/* [SERVER] receiving operation data */
+	RXRPC_CSTATE_SRVR_GOT_ARGS,		/* [SERVER] completely received operation data */
+	RXRPC_CSTATE_SRVR_SND_REPLY,		/* [SERVER] sending operation reply */
+	RXRPC_CSTATE_SRVR_RCV_FINAL_ACK,	/* [SERVER] receiving final ACK */
+	RXRPC_CSTATE_CLNT_SND_ARGS,		/* [CLIENT] sending operation args */
+	RXRPC_CSTATE_CLNT_RCV_REPLY,		/* [CLIENT] receiving operation reply */
+	RXRPC_CSTATE_CLNT_GOT_REPLY,		/* [CLIENT] completely received operation reply */
+} __attribute__((packed));
+
+extern const char *rxrpc_call_states[];
+
+enum rxrpc_app_estate {
+	RXRPC_ESTATE_NO_ERROR		= 0,	/* no error */
+	RXRPC_ESTATE_LOCAL_ABORT,		/* aborted locally by application layer */
+	RXRPC_ESTATE_PEER_ABORT,		/* aborted remotely by peer */
+	RXRPC_ESTATE_LOCAL_ERROR,		/* local ICMP network error */
+	RXRPC_ESTATE_REMOTE_ERROR,		/* remote ICMP network error */
+} __attribute__((packed));
+
+extern const char *rxrpc_call_error_states[];
+
+/*****************************************************************************/
+/*
+ * Rx call record and application scratch buffer
+ * - the call record occupies the bottom of a complete page
+ * - the application scratch buffer occupies the rest
+ */
+struct rxrpc_call
+{
+	atomic_t		usage;
+	struct rxrpc_connection	*conn;		/* connection upon which active */
+	spinlock_t		lock;		/* access lock */
+	struct module		*owner;		/* owner module */
+	wait_queue_head_t	waitq;		/* wait queue for events to happen */
+	struct list_head	link;		/* general internal list link */
+	struct list_head	call_link;	/* master call list link */
+	__be32			chan_ix;	/* connection channel index  */
+	__be32			call_id;	/* call ID on connection  */
+	unsigned long		cjif;		/* jiffies at call creation */
+	unsigned long		flags;		/* control flags */
+#define RXRPC_CALL_ACKS_TIMO	0x00000001	/* ACKS timeout reached */
+#define RXRPC_CALL_ACKR_TIMO	0x00000002	/* ACKR timeout reached */
+#define RXRPC_CALL_RCV_TIMO	0x00000004	/* RCV timeout reached */
+#define RXRPC_CALL_RCV_PKT	0x00000008	/* received packet */
+
+	/* transmission */
+	rxrpc_seq_t		snd_seq_count;	/* outgoing packet sequence number counter */
+	struct rxrpc_message	*snd_nextmsg;	/* next message being constructed for sending */
+	struct rxrpc_message	*snd_ping;	/* last ping message sent */
+	unsigned short		snd_resend_cnt;	/* count of resends since last ACK */
+
+	/* transmission ACK tracking */
+	struct list_head	acks_pendq;	/* messages pending ACK (ordered by seq) */
+	unsigned		acks_pend_cnt;	/* number of un-ACK'd packets */
+	rxrpc_seq_t		acks_dftv_seq;	/* highest definitively ACK'd msg seq */
+	struct timer_list	acks_timeout;	/* timeout on expected ACK */
+
+	/* reception */
+	struct list_head	rcv_receiveq;	/* messages pending reception (ordered by seq) */
+	struct list_head	rcv_krxiodq_lk;	/* krxiod queue for new inbound packets */
+	struct timer_list	rcv_timeout;	/* call receive activity timeout */
+
+	/* reception ACK'ing */
+	rxrpc_seq_t		ackr_win_bot;	/* bottom of ACK window */
+	rxrpc_seq_t		ackr_win_top;	/* top of ACK window */
+	rxrpc_seq_t		ackr_high_seq;	/* highest seqno yet received */
+	rxrpc_seq_net_t		ackr_prev_seq;	/* previous seqno received */
+	unsigned		ackr_pend_cnt;	/* number of pending ACKs */
+	struct timer_list	ackr_dfr_timo;	/* timeout on deferred ACK */
+	char			ackr_dfr_perm;	/* request for deferred ACKs permitted */
+	rxrpc_seq_t		ackr_dfr_seq;	/* seqno for deferred ACK */
+	struct rxrpc_ackpacket	ackr;		/* pending normal ACK packet */
+	uint8_t			ackr_array[RXRPC_CALL_ACK_WINDOW_SIZE];	/* ACK records */
+
+	/* presentation layer */
+	char			app_last_rcv;	/* T if received last packet from remote end */
+	enum rxrpc_app_cstate	app_call_state;	/* call state */
+	enum rxrpc_app_estate	app_err_state;	/* abort/error state */
+	struct list_head	app_readyq;	/* ordered ready received packet queue */
+	struct list_head	app_unreadyq;	/* ordered post-hole recv'd packet queue */
+	rxrpc_seq_t		app_ready_seq;	/* last seq number dropped into readyq */
+	size_t			app_ready_qty;	/* amount of data ready in readyq */
+	unsigned		app_opcode;	/* operation ID */
+	unsigned		app_abort_code;	/* abort code (when aborted) */
+	int			app_errno;	/* error number (when ICMP error received) */
+
+	/* statisics */
+	unsigned		pkt_rcv_count;	/* count of received packets on this call */
+	unsigned		pkt_snd_count;	/* count of sent packets on this call */
+	unsigned		app_read_count;	/* number of reads issued */
+
+	/* bits for the application to use */
+	rxrpc_call_attn_func_t	app_attn_func;	/* callback when attention required */
+	rxrpc_call_error_func_t	app_error_func;	/* callback when abort sent (cleanup and put) */
+	rxrpc_call_aemap_func_t	app_aemap_func;	/* callback to map abort code to/from errno */
+	void			*app_user;	/* application data */
+	struct list_head	app_link;	/* application list linkage */
+	struct list_head	app_attn_link;	/* application attention list linkage */
+	size_t			app_mark;	/* trigger callback when app_ready_qty>=app_mark */
+	char			app_async_read;	/* T if in async-read mode */
+	uint8_t			*app_read_buf;	/* application async read buffer (app_mark size) */
+	uint8_t			*app_scr_alloc;	/* application scratch allocation pointer */
+	void			*app_scr_ptr;	/* application pointer into scratch buffer */
+
+#define RXRPC_APP_MARK_EOF 0xFFFFFFFFU	/* mark at end of input */
+
+	/* application scratch buffer */
+	uint8_t			app_scratch[0] __attribute__((aligned(sizeof(long))));
+};
+
+#define RXRPC_CALL_SCRATCH_SIZE (PAGE_SIZE - sizeof(struct rxrpc_call))
+
+#define rxrpc_call_reset_scratch(CALL) \
+do { (CALL)->app_scr_alloc = (CALL)->app_scratch; } while(0)
+
+#define rxrpc_call_alloc_scratch(CALL,SIZE)						\
+({											\
+	void *ptr;									\
+	ptr = (CALL)->app_scr_alloc;							\
+	(CALL)->app_scr_alloc += (SIZE);						\
+	if ((SIZE)>RXRPC_CALL_SCRATCH_SIZE ||						\
+	    (size_t)((CALL)->app_scr_alloc - (u8*)(CALL)) > RXRPC_CALL_SCRATCH_SIZE) {	\
+		printk("rxrpc_call_alloc_scratch(%p,%Zu)\n",(CALL),(size_t)(SIZE));	\
+		BUG();									\
+	}										\
+	ptr;										\
+})
+
+#define rxrpc_call_alloc_scratch_s(CALL,TYPE)						\
+({											\
+	size_t size = sizeof(TYPE);							\
+	TYPE *ptr;									\
+	ptr = (TYPE*)(CALL)->app_scr_alloc;						\
+	(CALL)->app_scr_alloc += size;							\
+	if (size>RXRPC_CALL_SCRATCH_SIZE ||						\
+	    (size_t)((CALL)->app_scr_alloc - (u8*)(CALL)) > RXRPC_CALL_SCRATCH_SIZE) {	\
+		printk("rxrpc_call_alloc_scratch(%p,%Zu)\n",(CALL),size);		\
+		BUG();									\
+	}										\
+	ptr;										\
+})
+
+#define rxrpc_call_is_ack_pending(CALL) ((CALL)->ackr.reason != 0)
+
+extern int rxrpc_create_call(struct rxrpc_connection *conn,
+			     rxrpc_call_attn_func_t attn,
+			     rxrpc_call_error_func_t error,
+			     rxrpc_call_aemap_func_t aemap,
+			     struct rxrpc_call **_call);
+
+extern int rxrpc_incoming_call(struct rxrpc_connection *conn,
+			       struct rxrpc_message *msg,
+			       struct rxrpc_call **_call);
+
+static inline void rxrpc_get_call(struct rxrpc_call *call)
+{
+	BUG_ON(atomic_read(&call->usage)<=0);
+	atomic_inc(&call->usage);
+	/*printk("rxrpc_get_call(%p{u=%d})\n",(C),atomic_read(&(C)->usage));*/
+}
+
+extern void rxrpc_put_call(struct rxrpc_call *call);
+
+extern void rxrpc_call_do_stuff(struct rxrpc_call *call);
+
+extern int rxrpc_call_abort(struct rxrpc_call *call, int error);
+
+#define RXRPC_CALL_READ_BLOCK	0x0001	/* block if not enough data and not yet EOF */
+#define RXRPC_CALL_READ_ALL	0x0002	/* error if insufficient data received */
+extern int rxrpc_call_read_data(struct rxrpc_call *call, void *buffer, size_t size, int flags);
+
+extern int rxrpc_call_write_data(struct rxrpc_call *call,
+				 size_t sioc,
+				 struct kvec *siov,
+				 uint8_t rxhdr_flags,
+				 int alloc_flags,
+				 int dup_data,
+				 size_t *size_sent);
+
+extern void rxrpc_call_handle_error(struct rxrpc_call *conn, int local, int errno);
+
+#endif /* _LINUX_RXRPC_CALL_H */
diff --git a/include/rxrpc/connection.h b/include/rxrpc/connection.h
new file mode 100644
index 000000000000..41e6781ad067
--- /dev/null
+++ b/include/rxrpc/connection.h
@@ -0,0 +1,83 @@
+/* connection.h: Rx connection record
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_CONNECTION_H
+#define _LINUX_RXRPC_CONNECTION_H
+
+#include <rxrpc/types.h>
+#include <rxrpc/krxtimod.h>
+
+struct sk_buff;
+
+/*****************************************************************************/
+/*
+ * Rx connection
+ * - connections are matched by (rmt_port,rmt_addr,service_id,conn_id,clientflag)
+ * - connections only retain a refcount on the peer when they are active
+ * - connections with refcount==0 are inactive and reside in the peer's graveyard
+ */
+struct rxrpc_connection
+{
+	atomic_t		usage;
+	struct rxrpc_transport	*trans;		/* transport endpoint */
+	struct rxrpc_peer	*peer;		/* peer from/to which connected */
+	struct rxrpc_service	*service;	/* responsible service (inbound conns) */
+	struct rxrpc_timer	timeout;	/* decaching timer */
+	struct list_head	link;		/* link in peer's list */
+	struct list_head	proc_link;	/* link in proc list */
+	struct list_head	err_link;	/* link in ICMP error processing list */
+	struct list_head	id_link;	/* link in ID grant list */
+	struct sockaddr_in	addr;		/* remote address */
+	struct rxrpc_call	*channels[4];	/* channels (active calls) */
+	wait_queue_head_t	chanwait;	/* wait for channel to become available */
+	spinlock_t		lock;		/* access lock */
+	struct timeval		atime;		/* last access time */
+	size_t			mtu_size;	/* MTU size for outbound messages */
+	unsigned		call_counter;	/* call ID counter */
+	rxrpc_serial_t		serial_counter;	/* packet serial number counter */
+
+	/* the following should all be in net order */
+	__be32			in_epoch;	/* peer's epoch */
+	__be32			out_epoch;	/* my epoch */
+	__be32			conn_id;	/* connection ID, appropriately shifted */
+	__be16			service_id;	/* service ID */
+	uint8_t			security_ix;	/* security ID */
+	uint8_t			in_clientflag;	/* RXRPC_CLIENT_INITIATED if we are server */
+	uint8_t			out_clientflag;	/* RXRPC_CLIENT_INITIATED if we are client */
+};
+
+extern int rxrpc_create_connection(struct rxrpc_transport *trans,
+				   __be16 port,
+				   __be32 addr,
+				   uint16_t service_id,
+				   void *security,
+				   struct rxrpc_connection **_conn);
+
+extern int rxrpc_connection_lookup(struct rxrpc_peer *peer,
+				   struct rxrpc_message *msg,
+				   struct rxrpc_connection **_conn);
+
+static inline void rxrpc_get_connection(struct rxrpc_connection *conn)
+{
+	BUG_ON(atomic_read(&conn->usage)<0);
+	atomic_inc(&conn->usage);
+	//printk("rxrpc_get_conn(%p{u=%d})\n",conn,atomic_read(&conn->usage));
+}
+
+extern void rxrpc_put_connection(struct rxrpc_connection *conn);
+
+extern int rxrpc_conn_receive_call_packet(struct rxrpc_connection *conn,
+					  struct rxrpc_call *call,
+					  struct rxrpc_message *msg);
+
+extern void rxrpc_conn_handle_error(struct rxrpc_connection *conn, int local, int errno);
+
+#endif /* _LINUX_RXRPC_CONNECTION_H */
diff --git a/include/rxrpc/krxiod.h b/include/rxrpc/krxiod.h
new file mode 100644
index 000000000000..c0e0e82e4df2
--- /dev/null
+++ b/include/rxrpc/krxiod.h
@@ -0,0 +1,27 @@
+/* krxiod.h: Rx RPC I/O kernel thread interface
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_KRXIOD_H
+#define _LINUX_RXRPC_KRXIOD_H
+
+#include <rxrpc/types.h>
+
+extern int rxrpc_krxiod_init(void);
+extern void rxrpc_krxiod_kill(void);
+extern void rxrpc_krxiod_queue_transport(struct rxrpc_transport *trans);
+extern void rxrpc_krxiod_dequeue_transport(struct rxrpc_transport *trans);
+extern void rxrpc_krxiod_queue_peer(struct rxrpc_peer *peer);
+extern void rxrpc_krxiod_dequeue_peer(struct rxrpc_peer *peer);
+extern void rxrpc_krxiod_clear_peers(struct rxrpc_transport *trans);
+extern void rxrpc_krxiod_queue_call(struct rxrpc_call *call);
+extern void rxrpc_krxiod_dequeue_call(struct rxrpc_call *call);
+
+#endif /* _LINUX_RXRPC_KRXIOD_H */
diff --git a/include/rxrpc/krxsecd.h b/include/rxrpc/krxsecd.h
new file mode 100644
index 000000000000..55ce43a25b38
--- /dev/null
+++ b/include/rxrpc/krxsecd.h
@@ -0,0 +1,22 @@
+/* krxsecd.h: Rx RPC security kernel thread interface
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_KRXSECD_H
+#define _LINUX_RXRPC_KRXSECD_H
+
+#include <rxrpc/types.h>
+
+extern int rxrpc_krxsecd_init(void);
+extern void rxrpc_krxsecd_kill(void);
+extern void rxrpc_krxsecd_clear_transport(struct rxrpc_transport *trans);
+extern void rxrpc_krxsecd_queue_incoming_call(struct rxrpc_message *msg);
+
+#endif /* _LINUX_RXRPC_KRXSECD_H */
diff --git a/include/rxrpc/krxtimod.h b/include/rxrpc/krxtimod.h
new file mode 100644
index 000000000000..b3d298b612f2
--- /dev/null
+++ b/include/rxrpc/krxtimod.h
@@ -0,0 +1,45 @@
+/* krxtimod.h: RxRPC timeout daemon
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_KRXTIMOD_H
+#define _LINUX_RXRPC_KRXTIMOD_H
+
+#include <rxrpc/types.h>
+
+struct rxrpc_timer_ops {
+	/* called when the front of the timer queue has timed out */
+	void (*timed_out)(struct rxrpc_timer *timer);
+};
+
+/*****************************************************************************/
+/*
+ * RXRPC timer/timeout record
+ */
+struct rxrpc_timer
+{
+	struct list_head		link;		/* link in timer queue */
+	unsigned long			timo_jif;	/* timeout time */
+	const struct rxrpc_timer_ops	*ops;		/* timeout expiry function */
+};
+
+static inline void rxrpc_timer_init(rxrpc_timer_t *timer, const struct rxrpc_timer_ops *ops)
+{
+	INIT_LIST_HEAD(&timer->link);
+	timer->ops = ops;
+}
+
+extern int rxrpc_krxtimod_start(void);
+extern void rxrpc_krxtimod_kill(void);
+
+extern void rxrpc_krxtimod_add_timer(rxrpc_timer_t *timer, unsigned long timeout);
+extern int rxrpc_krxtimod_del_timer(rxrpc_timer_t *timer);
+
+#endif /* _LINUX_RXRPC_KRXTIMOD_H */
diff --git a/include/rxrpc/message.h b/include/rxrpc/message.h
new file mode 100644
index 000000000000..3a59df6870b2
--- /dev/null
+++ b/include/rxrpc/message.h
@@ -0,0 +1,71 @@
+/* message.h: Rx message caching
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_MESSAGE_H
+#define _LINUX_RXRPC_MESSAGE_H
+
+#include <rxrpc/packet.h>
+
+/*****************************************************************************/
+/*
+ * Rx message record
+ */
+struct rxrpc_message
+{
+	atomic_t		usage;
+	struct list_head	link;		/* list link */
+	struct timeval		stamp;		/* time received or last sent */
+	rxrpc_seq_t		seq;		/* message sequence number */
+
+	int			state;		/* the state the message is currently in */
+#define RXRPC_MSG_PREPARED	0
+#define RXRPC_MSG_SENT		1
+#define RXRPC_MSG_ACKED		2		/* provisionally ACK'd */
+#define RXRPC_MSG_DONE		3		/* definitively ACK'd (msg->seq<ack.firstPacket) */
+#define RXRPC_MSG_RECEIVED	4
+#define RXRPC_MSG_ERROR		-1
+	char			rttdone;	/* used for RTT */
+
+	struct rxrpc_transport	*trans;		/* transport received through */
+	struct rxrpc_connection	*conn;		/* connection received over */
+	struct sk_buff		*pkt;		/* received packet */
+	off_t			offset;		/* offset into pkt of next byte of data */
+
+	struct rxrpc_header	hdr;		/* message header */
+
+	int			dcount;		/* data part count */
+	size_t			dsize;		/* data size */
+#define RXRPC_MSG_MAX_IOCS 8
+	struct kvec		data[RXRPC_MSG_MAX_IOCS]; /* message data */
+	unsigned long		dfree;		/* bit mask indicating kfree(data[x]) if T */
+};
+
+#define rxrpc_get_message(M) do { atomic_inc(&(M)->usage); } while(0)
+
+extern void __rxrpc_put_message(struct rxrpc_message *msg);
+static inline void rxrpc_put_message(struct rxrpc_message *msg)
+{
+	BUG_ON(atomic_read(&msg->usage)<=0);
+	if (atomic_dec_and_test(&msg->usage))
+		__rxrpc_put_message(msg);
+}
+
+extern int rxrpc_conn_newmsg(struct rxrpc_connection *conn,
+			     struct rxrpc_call *call,
+			     uint8_t type,
+			     int count,
+			     struct kvec *diov,
+			     int alloc_flags,
+			     struct rxrpc_message **_msg);
+
+extern int rxrpc_conn_sendmsg(struct rxrpc_connection *conn, struct rxrpc_message *msg);
+
+#endif /* _LINUX_RXRPC_MESSAGE_H */
diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h
new file mode 100644
index 000000000000..1447f0aaa0eb
--- /dev/null
+++ b/include/rxrpc/packet.h
@@ -0,0 +1,127 @@
+/* packet.h: Rx packet layout and definitions
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_PACKET_H
+#define _LINUX_RXRPC_PACKET_H
+
+#include <rxrpc/types.h>
+
+#define RXRPC_IPUDP_SIZE		28
+extern size_t RXRPC_MAX_PACKET_SIZE;
+#define RXRPC_MAX_PACKET_DATA_SIZE	(RXRPC_MAX_PACKET_SIZE - sizeof(struct rxrpc_header))
+#define RXRPC_LOCAL_PACKET_SIZE		RXRPC_MAX_PACKET_SIZE
+#define RXRPC_REMOTE_PACKET_SIZE	(576 - RXRPC_IPUDP_SIZE)
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx packet header
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_header
+{
+	__be32		epoch;		/* client boot timestamp */
+
+	__be32		cid;		/* connection and channel ID */
+#define RXRPC_MAXCALLS		4			/* max active calls per conn */
+#define RXRPC_CHANNELMASK	(RXRPC_MAXCALLS-1)	/* mask for channel ID */
+#define RXRPC_CIDMASK		(~RXRPC_CHANNELMASK)	/* mask for connection ID */
+#define RXRPC_CIDSHIFT		2			/* shift for connection ID */
+
+	__be32		callNumber;	/* call ID (0 for connection-level packets) */
+#define RXRPC_PROCESS_MAXCALLS	(1<<2)	/* maximum number of active calls per conn (power of 2) */
+
+	__be32		seq;		/* sequence number of pkt in call stream */
+	__be32		serial;		/* serial number of pkt sent to network */
+
+	uint8_t		type;		/* packet type */
+#define RXRPC_PACKET_TYPE_DATA		1	/* data */
+#define RXRPC_PACKET_TYPE_ACK		2	/* ACK */
+#define RXRPC_PACKET_TYPE_BUSY		3	/* call reject */
+#define RXRPC_PACKET_TYPE_ABORT		4	/* call/connection abort */
+#define RXRPC_PACKET_TYPE_ACKALL	5	/* ACK all outstanding packets on call */
+#define RXRPC_PACKET_TYPE_CHALLENGE	6	/* connection security challenge (SRVR->CLNT) */
+#define RXRPC_PACKET_TYPE_RESPONSE	7	/* connection secutity response (CLNT->SRVR) */
+#define RXRPC_PACKET_TYPE_DEBUG		8	/* debug info request */
+#define RXRPC_N_PACKET_TYPES		9	/* number of packet types (incl type 0) */
+
+	uint8_t		flags;		/* packet flags */
+#define RXRPC_CLIENT_INITIATED	0x01		/* signifies a packet generated by a client */
+#define RXRPC_REQUEST_ACK	0x02		/* request an unconditional ACK of this packet */
+#define RXRPC_LAST_PACKET	0x04		/* the last packet from this side for this call */
+#define RXRPC_MORE_PACKETS	0x08		/* more packets to come */
+#define RXRPC_JUMBO_PACKET	0x20		/* [DATA] this is a jumbo packet */
+#define RXRPC_SLOW_START_OK	0x20		/* [ACK] slow start supported */
+
+	uint8_t		userStatus;	/* app-layer defined status */
+	uint8_t		securityIndex;	/* security protocol ID */
+	__be16		_rsvd;		/* reserved (used by kerberos security as cksum) */
+	__be16		serviceId;	/* service ID */
+
+} __attribute__((packed));
+
+#define __rxrpc_header_off(X) offsetof(struct rxrpc_header,X)
+
+extern const char *rxrpc_pkts[];
+
+/*****************************************************************************/
+/*
+ * jumbo packet secondary header
+ * - can be mapped to read header by:
+ *   - new_serial = serial + 1
+ *   - new_seq = seq + 1
+ *   - new_flags = j_flags
+ *   - new__rsvd = j__rsvd
+ *   - duplicating all other fields
+ */
+struct rxrpc_jumbo_header
+{
+	uint8_t		flags;		/* packet flags (as per rxrpc_header) */
+	uint8_t		pad;
+	__be16		_rsvd;		/* reserved (used by kerberos security as cksum) */
+};
+
+#define RXRPC_JUMBO_DATALEN	1412	/* non-terminal jumbo packet data length */
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx ACK packet data payload
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_ackpacket
+{
+	__be16		bufferSpace;	/* number of packet buffers available */
+	__be16		maxSkew;	/* diff between serno being ACK'd and highest serial no
+					 * received */
+	__be32		firstPacket;	/* sequence no of first ACK'd packet in attached list */
+	__be32		previousPacket;	/* sequence no of previous packet received */
+	__be32		serial;		/* serial no of packet that prompted this ACK */
+
+	uint8_t		reason;		/* reason for ACK */
+#define RXRPC_ACK_REQUESTED		1	/* ACK was requested on packet */
+#define RXRPC_ACK_DUPLICATE		2	/* duplicate packet received */
+#define RXRPC_ACK_OUT_OF_SEQUENCE	3	/* out of sequence packet received */
+#define RXRPC_ACK_EXCEEDS_WINDOW	4	/* packet received beyond end of ACK window */
+#define RXRPC_ACK_NOSPACE		5	/* packet discarded due to lack of buffer space */
+#define RXRPC_ACK_PING			6	/* keep alive ACK */
+#define RXRPC_ACK_PING_RESPONSE		7	/* response to RXRPC_ACK_PING */
+#define RXRPC_ACK_DELAY			8	/* nothing happened since received packet */
+#define RXRPC_ACK_IDLE			9	/* ACK due to fully received ACK window */
+
+	uint8_t		nAcks;		/* number of ACKs */
+#define RXRPC_MAXACKS	255
+
+	uint8_t		acks[0];	/* list of ACK/NAKs */
+#define RXRPC_ACK_TYPE_NACK		0
+#define RXRPC_ACK_TYPE_ACK		1
+
+} __attribute__((packed));
+
+#endif /* _LINUX_RXRPC_PACKET_H */
diff --git a/include/rxrpc/peer.h b/include/rxrpc/peer.h
new file mode 100644
index 000000000000..8b8fe97cbbcc
--- /dev/null
+++ b/include/rxrpc/peer.h
@@ -0,0 +1,82 @@
+/* peer.h: Rx RPC per-transport peer record
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_PEER_H
+#define _LINUX_RXRPC_PEER_H
+
+#include <linux/wait.h>
+#include <rxrpc/types.h>
+#include <rxrpc/krxtimod.h>
+
+struct rxrpc_peer_ops
+{
+	/* peer record being added */
+	int (*adding)(struct rxrpc_peer *peer);
+
+	/* peer record being discarded from graveyard */
+	void (*discarding)(struct rxrpc_peer *peer);
+
+	/* change of epoch detected on connection */
+	void (*change_of_epoch)(struct rxrpc_connection *conn);
+};
+
+/*****************************************************************************/
+/*
+ * Rx RPC per-transport peer record
+ * - peers only retain a refcount on the transport when they are active
+ * - peers with refcount==0 are inactive and reside in the transport's graveyard
+ */
+struct rxrpc_peer
+{
+	atomic_t		usage;
+	struct rxrpc_peer_ops	*ops;		/* operations on this peer */
+	struct rxrpc_transport	*trans;		/* owner transport */
+	struct rxrpc_timer	timeout;	/* timeout for grave destruction */
+	struct list_head	link;		/* link in transport's peer list */
+	struct list_head	proc_link;	/* link in /proc list */
+	rwlock_t		conn_idlock;	/* lock for connection IDs */
+	struct list_head	conn_idlist;	/* list of connections granted IDs */
+	uint32_t		conn_idcounter;	/* connection ID counter */
+	rwlock_t		conn_lock;	/* lock for active/dead connections */
+	struct list_head	conn_active;	/* active connections to/from this peer */
+	struct list_head	conn_graveyard;	/* graveyard for inactive connections */
+	spinlock_t		conn_gylock;	/* lock for conn_graveyard */
+	wait_queue_head_t	conn_gy_waitq;	/* wait queue hit when graveyard is empty */
+	atomic_t		conn_count;	/* number of attached connections */
+	struct in_addr		addr;		/* remote address */
+	size_t			if_mtu;		/* interface MTU for this peer */
+	spinlock_t		lock;		/* access lock */
+
+	void			*user;		/* application layer data */
+
+	/* calculated RTT cache */
+#define RXRPC_RTT_CACHE_SIZE 32
+	suseconds_t		rtt;		/* current RTT estimate (in uS) */
+	unsigned		rtt_point;	/* next entry at which to insert */
+	unsigned		rtt_usage;	/* amount of cache actually used */
+	suseconds_t		rtt_cache[RXRPC_RTT_CACHE_SIZE]; /* calculated RTT cache */
+};
+
+
+extern int rxrpc_peer_lookup(struct rxrpc_transport *trans,
+			     __be32 addr,
+			     struct rxrpc_peer **_peer);
+
+static inline void rxrpc_get_peer(struct rxrpc_peer *peer)
+{
+	BUG_ON(atomic_read(&peer->usage)<0);
+	atomic_inc(&peer->usage);
+	//printk("rxrpc_get_peer(%p{u=%d})\n",peer,atomic_read(&peer->usage));
+}
+
+extern void rxrpc_put_peer(struct rxrpc_peer *peer);
+
+#endif /* _LINUX_RXRPC_PEER_H */
diff --git a/include/rxrpc/rxrpc.h b/include/rxrpc/rxrpc.h
new file mode 100644
index 000000000000..8d9874cef991
--- /dev/null
+++ b/include/rxrpc/rxrpc.h
@@ -0,0 +1,36 @@
+/* rx.h: Rx RPC interface
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_RXRPC_H
+#define _LINUX_RXRPC_RXRPC_H
+
+#ifdef __KERNEL__
+
+extern __be32 rxrpc_epoch;
+
+#ifdef CONFIG_SYSCTL
+extern int rxrpc_ktrace;
+extern int rxrpc_kdebug;
+extern int rxrpc_kproto;
+extern int rxrpc_knet;
+#else
+#define rxrpc_ktrace	0
+#define rxrpc_kdebug	0
+#define rxrpc_kproto	0
+#define rxrpc_knet	0
+#endif
+
+extern int rxrpc_sysctl_init(void);
+extern void rxrpc_sysctl_cleanup(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_RXRPC_RXRPC_H */
diff --git a/include/rxrpc/transport.h b/include/rxrpc/transport.h
new file mode 100644
index 000000000000..7c7b9683fa39
--- /dev/null
+++ b/include/rxrpc/transport.h
@@ -0,0 +1,106 @@
+/* transport.h: Rx transport management
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_TRANSPORT_H
+#define _LINUX_RXRPC_TRANSPORT_H
+
+#include <rxrpc/types.h>
+#include <rxrpc/krxiod.h>
+#include <rxrpc/rxrpc.h>
+#include <linux/skbuff.h>
+#include <linux/rwsem.h>
+
+typedef int (*rxrpc_newcall_fnx_t)(struct rxrpc_call *call);
+
+extern wait_queue_head_t rxrpc_krxiod_wq;
+
+/*****************************************************************************/
+/*
+ * Rx operation specification
+ * - tables of these must be sorted by op ID so that they can be binary-chop searched
+ */
+struct rxrpc_operation
+{
+	unsigned		id;		/* operation ID */
+	size_t			asize;		/* minimum size of argument block */
+	const char		*name;		/* name of operation */
+	void			*user;		/* initial user data */
+};
+
+/*****************************************************************************/
+/*
+ * Rx transport service record
+ */
+struct rxrpc_service
+{
+	struct list_head	link;		/* link in services list on transport */
+	struct module		*owner;		/* owner module */
+	rxrpc_newcall_fnx_t	new_call;	/* new call handler function */
+	const char		*name;		/* name of service */
+	unsigned short		service_id;	/* Rx service ID */
+	rxrpc_call_attn_func_t	attn_func;	/* call requires attention callback */
+	rxrpc_call_error_func_t	error_func;	/* call error callback */
+	rxrpc_call_aemap_func_t	aemap_func;	/* abort -> errno mapping callback */
+
+	const struct rxrpc_operation	*ops_begin;	/* beginning of operations table */
+	const struct rxrpc_operation	*ops_end;	/* end of operations table */
+};
+
+/*****************************************************************************/
+/*
+ * Rx transport endpoint record
+ */
+struct rxrpc_transport
+{
+	atomic_t		usage;
+	struct socket		*socket;	/* my UDP socket */
+	struct list_head	services;	/* services listening on this socket */
+	struct list_head	link;		/* link in transport list */
+	struct list_head	proc_link;	/* link in transport proc list */
+	struct list_head	krxiodq_link;	/* krxiod attention queue link */
+	spinlock_t		lock;		/* access lock */
+	struct list_head	peer_active;	/* active peers connected to over this socket */
+	struct list_head	peer_graveyard;	/* inactive peer list */
+	spinlock_t		peer_gylock;	/* peer graveyard lock */
+	wait_queue_head_t	peer_gy_waitq;	/* wait queue hit when peer graveyard is empty */
+	rwlock_t		peer_lock;	/* peer list access lock */
+	atomic_t		peer_count;	/* number of peers */
+	struct rxrpc_peer_ops	*peer_ops;	/* default peer operations */
+	unsigned short		port;		/* port upon which listening */
+	volatile char		error_rcvd;	/* T if received ICMP error outstanding */
+};
+
+extern int rxrpc_create_transport(unsigned short port,
+				  struct rxrpc_transport **_trans);
+
+static inline void rxrpc_get_transport(struct rxrpc_transport *trans)
+{
+	BUG_ON(atomic_read(&trans->usage) <= 0);
+	atomic_inc(&trans->usage);
+	//printk("rxrpc_get_transport(%p{u=%d})\n",
+	//       trans, atomic_read(&trans->usage));
+}
+
+extern void rxrpc_put_transport(struct rxrpc_transport *trans);
+
+extern int rxrpc_add_service(struct rxrpc_transport *trans,
+			     struct rxrpc_service *srv);
+
+extern void rxrpc_del_service(struct rxrpc_transport *trans,
+			      struct rxrpc_service *srv);
+
+extern void rxrpc_trans_receive_packet(struct rxrpc_transport *trans);
+
+extern int rxrpc_trans_immediate_abort(struct rxrpc_transport *trans,
+				       struct rxrpc_message *msg,
+				       int error);
+
+#endif /* _LINUX_RXRPC_TRANSPORT_H */
diff --git a/include/rxrpc/types.h b/include/rxrpc/types.h
new file mode 100644
index 000000000000..327a5fc4719c
--- /dev/null
+++ b/include/rxrpc/types.h
@@ -0,0 +1,41 @@
+/* types.h: Rx types
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_TYPES_H
+#define _LINUX_RXRPC_TYPES_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+typedef uint32_t	rxrpc_seq_t;	/* Rx message sequence number */
+typedef uint32_t	rxrpc_serial_t;	/* Rx message serial number */
+typedef __be32	rxrpc_seq_net_t; /* on-the-wire Rx message sequence number */
+typedef __be32	rxrpc_serial_net_t; /* on-the-wire Rx message serial number */
+
+struct rxrpc_call;
+struct rxrpc_connection;
+struct rxrpc_header;
+struct rxrpc_message;
+struct rxrpc_operation;
+struct rxrpc_peer;
+struct rxrpc_service;
+typedef struct rxrpc_timer rxrpc_timer_t;
+struct rxrpc_transport;
+
+typedef void (*rxrpc_call_attn_func_t)(struct rxrpc_call *call);
+typedef void (*rxrpc_call_error_func_t)(struct rxrpc_call *call);
+typedef void (*rxrpc_call_aemap_func_t)(struct rxrpc_call *call);
+
+#endif /* _LINUX_RXRPC_TYPES_H */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
new file mode 100644
index 000000000000..1d54c063ae52
--- /dev/null
+++ b/include/scsi/scsi.h
@@ -0,0 +1,412 @@
+/*
+ * This header file contains public constants and structures used by
+ * the scsi code for linux.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+#ifndef _SCSI_SCSI_H
+#define _SCSI_SCSI_H
+
+#include <linux/types.h>
+
+/*
+ *	The maximum sg list length SCSI can cope with
+ *	(currently must be a power of 2 between 32 and 256)
+ */
+#define SCSI_MAX_PHYS_SEGMENTS	MAX_PHYS_SEGMENTS
+
+
+/*
+ *	SCSI command lengths
+ */
+
+extern const unsigned char scsi_command_size[8];
+#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
+
+/*
+ *	SCSI device types
+ */
+
+#define MAX_SCSI_DEVICE_CODE 14
+extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
+
+/*
+ *      SCSI opcodes
+ */
+
+#define TEST_UNIT_READY       0x00
+#define REZERO_UNIT           0x01
+#define REQUEST_SENSE         0x03
+#define FORMAT_UNIT           0x04
+#define READ_BLOCK_LIMITS     0x05
+#define REASSIGN_BLOCKS       0x07
+#define READ_6                0x08
+#define WRITE_6               0x0a
+#define SEEK_6                0x0b
+#define READ_REVERSE          0x0f
+#define WRITE_FILEMARKS       0x10
+#define SPACE                 0x11
+#define INQUIRY               0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT           0x15
+#define RESERVE               0x16
+#define RELEASE               0x17
+#define COPY                  0x18
+#define ERASE                 0x19
+#define MODE_SENSE            0x1a
+#define START_STOP            0x1b
+#define RECEIVE_DIAGNOSTIC    0x1c
+#define SEND_DIAGNOSTIC       0x1d
+#define ALLOW_MEDIUM_REMOVAL  0x1e
+
+#define SET_WINDOW            0x24
+#define READ_CAPACITY         0x25
+#define READ_10               0x28
+#define WRITE_10              0x2a
+#define SEEK_10               0x2b
+#define WRITE_VERIFY          0x2e
+#define VERIFY                0x2f
+#define SEARCH_HIGH           0x30
+#define SEARCH_EQUAL          0x31
+#define SEARCH_LOW            0x32
+#define SET_LIMITS            0x33
+#define PRE_FETCH             0x34
+#define READ_POSITION         0x34
+#define SYNCHRONIZE_CACHE     0x35
+#define LOCK_UNLOCK_CACHE     0x36
+#define READ_DEFECT_DATA      0x37
+#define MEDIUM_SCAN           0x38
+#define COMPARE               0x39
+#define COPY_VERIFY           0x3a
+#define WRITE_BUFFER          0x3b
+#define READ_BUFFER           0x3c
+#define UPDATE_BLOCK          0x3d
+#define READ_LONG             0x3e
+#define WRITE_LONG            0x3f
+#define CHANGE_DEFINITION     0x40
+#define WRITE_SAME            0x41
+#define READ_TOC              0x43
+#define LOG_SELECT            0x4c
+#define LOG_SENSE             0x4d
+#define MODE_SELECT_10        0x55
+#define RESERVE_10            0x56
+#define RELEASE_10            0x57
+#define MODE_SENSE_10         0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define REPORT_LUNS           0xa0
+#define MOVE_MEDIUM           0xa5
+#define READ_12               0xa8
+#define WRITE_12              0xaa
+#define WRITE_VERIFY_12       0xae
+#define SEARCH_HIGH_12        0xb0
+#define SEARCH_EQUAL_12       0xb1
+#define SEARCH_LOW_12         0xb2
+#define READ_ELEMENT_STATUS   0xb8
+#define SEND_VOLUME_TAG       0xb6
+#define WRITE_LONG_2          0xea
+#define READ_16               0x88
+#define WRITE_16              0x8a
+#define VERIFY_16	      0x8f
+#define SERVICE_ACTION_IN     0x9e
+/* values for service action in */
+#define	SAI_READ_CAPACITY_16  0x10
+
+
+/*
+ *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ *  T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD            0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET   0x04
+#define SAM_STAT_BUSY            0x08
+#define SAM_STAT_INTERMEDIATE    0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22	/* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL   0x28
+#define SAM_STAT_ACA_ACTIVE      0x30
+#define SAM_STAT_TASK_ABORTED    0x40
+
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ *          driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline int scsi_status_is_good(int status)
+{
+	/*
+	 * FIXME: bit0 is listed as reserved in SCSI-2, but is
+	 * significant in SCSI-3.  For now, we follow the SCSI-2
+	 * behaviour and ignore reserved bits.
+	 */
+	status &= 0xfe;
+	return ((status == SAM_STAT_GOOD) ||
+		(status == SAM_STAT_INTERMEDIATE) ||
+		(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+		/* FIXME: this is obsolete in SAM-3 */
+		(status == SAM_STAT_COMMAND_TERMINATED));
+}
+
+/*
+ *  Status codes. These are deprecated as they are shifted 1 bit right
+ *  from those found in the SCSI standards. This causes confusion for
+ *  applications that are ported to several OSes. Prefer SAM Status codes
+ *  above.
+ */
+
+#define GOOD                 0x00
+#define CHECK_CONDITION      0x01
+#define CONDITION_GOOD       0x02
+#define BUSY                 0x04
+#define INTERMEDIATE_GOOD    0x08
+#define INTERMEDIATE_C_GOOD  0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED   0x11
+#define QUEUE_FULL           0x14
+#define ACA_ACTIVE           0x18
+#define TASK_ABORTED         0x20
+
+#define STATUS_MASK          0xfe
+
+/*
+ *  SENSE KEYS
+ */
+
+#define NO_SENSE            0x00
+#define RECOVERED_ERROR     0x01
+#define NOT_READY           0x02
+#define MEDIUM_ERROR        0x03
+#define HARDWARE_ERROR      0x04
+#define ILLEGAL_REQUEST     0x05
+#define UNIT_ATTENTION      0x06
+#define DATA_PROTECT        0x07
+#define BLANK_CHECK         0x08
+#define COPY_ABORTED        0x0a
+#define ABORTED_COMMAND     0x0b
+#define VOLUME_OVERFLOW     0x0d
+#define MISCOMPARE          0x0e
+
+
+/*
+ *  DEVICE TYPES
+ */
+
+#define TYPE_DISK           0x00
+#define TYPE_TAPE           0x01
+#define TYPE_PRINTER        0x02
+#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
+#define TYPE_WORM           0x04    /* Treated as ROM by our system */
+#define TYPE_ROM            0x05
+#define TYPE_SCANNER        0x06
+#define TYPE_MOD            0x07    /* Magneto-optical disk - 
+				     * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM           0x09    /* Communications device */
+#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
+#define TYPE_RAID           0x0c
+#define TYPE_NO_LUN         0x7f
+
+/*
+ * standard mode-select header prepended to all mode-select commands
+ */
+
+struct ccs_modesel_head {
+	__u8 _r1;			/* reserved */
+	__u8 medium;		/* device-specific medium type */
+	__u8 _r2;			/* reserved */
+	__u8 block_desc_length;	/* block descriptor length */
+	__u8 density;		/* device-specific density code */
+	__u8 number_blocks_hi;	/* number of blocks in this block desc */
+	__u8 number_blocks_med;
+	__u8 number_blocks_lo;
+	__u8 _r3;
+	__u8 block_length_hi;	/* block length for blocks in this desc */
+	__u8 block_length_med;
+	__u8 block_length_lo;
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+	__u8 scsi_lun[8];
+};
+
+/*
+ *  MESSAGE CODES
+ */
+
+#define COMMAND_COMPLETE    0x00
+#define EXTENDED_MESSAGE    0x01
+#define     EXTENDED_MODIFY_DATA_POINTER    0x00
+#define     EXTENDED_SDTR                   0x01
+#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
+#define     EXTENDED_WDTR                   0x03
+#define     EXTENDED_PPR                    0x04
+#define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
+#define SAVE_POINTERS       0x02
+#define RESTORE_POINTERS    0x03
+#define DISCONNECT          0x04
+#define INITIATOR_ERROR     0x05
+#define ABORT_TASK_SET      0x06
+#define MESSAGE_REJECT      0x07
+#define NOP                 0x08
+#define MSG_PARITY_ERROR    0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define TARGET_RESET        0x0c
+#define ABORT_TASK          0x0d
+#define CLEAR_TASK_SET      0x0e
+#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
+#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define CLEAR_ACA           0x16
+#define LOGICAL_UNIT_RESET  0x17
+#define SIMPLE_QUEUE_TAG    0x20
+#define HEAD_OF_QUEUE_TAG   0x21
+#define ORDERED_QUEUE_TAG   0x22
+#define IGNORE_WIDE_RESIDUE 0x23
+#define ACA                 0x24
+#define QAS_REQUEST         0x55
+
+/* Old SCSI2 names, don't use in new code */
+#define BUS_DEVICE_RESET    TARGET_RESET
+#define ABORT               ABORT_TASK_SET
+
+/*
+ * Host byte codes
+ */
+
+#define DID_OK          0x00	/* NO error                                */
+#define DID_NO_CONNECT  0x01	/* Couldn't connect before timeout period  */
+#define DID_BUS_BUSY    0x02	/* BUS stayed busy through time out period */
+#define DID_TIME_OUT    0x03	/* TIMED OUT for other reason              */
+#define DID_BAD_TARGET  0x04	/* BAD target.                             */
+#define DID_ABORT       0x05	/* Told to abort for some other reason     */
+#define DID_PARITY      0x06	/* Parity error                            */
+#define DID_ERROR       0x07	/* Internal error                          */
+#define DID_RESET       0x08	/* Reset by somebody.                      */
+#define DID_BAD_INTR    0x09	/* Got an interrupt we weren't expecting.  */
+#define DID_PASSTHROUGH 0x0a	/* Force command past mid-layer            */
+#define DID_SOFT_ERROR  0x0b	/* The low level driver just wish a retry  */
+#define DID_IMM_RETRY   0x0c	/* Retry without decrementing retry count  */
+#define DRIVER_OK       0x00	/* Driver status                           */
+
+/*
+ *  These indicate the error that occurred, and what is available.
+ */
+
+#define DRIVER_BUSY         0x01
+#define DRIVER_SOFT         0x02
+#define DRIVER_MEDIA        0x03
+#define DRIVER_ERROR        0x04
+
+#define DRIVER_INVALID      0x05
+#define DRIVER_TIMEOUT      0x06
+#define DRIVER_HARD         0x07
+#define DRIVER_SENSE	    0x08
+
+#define SUGGEST_RETRY       0x10
+#define SUGGEST_ABORT       0x20
+#define SUGGEST_REMAP       0x30
+#define SUGGEST_DIE         0x40
+#define SUGGEST_SENSE       0x80
+#define SUGGEST_IS_OK       0xff
+
+#define DRIVER_MASK         0x0f
+#define SUGGEST_MASK        0xf0
+
+/*
+ * Internal return values.
+ */
+
+#define NEEDS_RETRY     0x2001
+#define SUCCESS         0x2002
+#define FAILED          0x2003
+#define QUEUED          0x2004
+#define SOFT_ERROR      0x2005
+#define ADD_TO_MLQUEUE  0x2006
+#define TIMEOUT_ERROR   0x2007
+
+/*
+ * Midlevel queue return values.
+ */
+#define SCSI_MLQUEUE_HOST_BUSY   0x1055
+#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
+#define SCSI_MLQUEUE_EH_RETRY    0x1057
+
+/*
+ *  Use these to separate status msg and our bytes
+ *
+ *  These are set by:
+ *
+ *      status byte = set from target device
+ *      msg_byte    = return status from host adapter itself.
+ *      host_byte   = set by low-level driver to indicate status.
+ *      driver_byte = set by mid-level.
+ */
+#define status_byte(result) (((result) >> 1) & 0x7f)
+#define msg_byte(result)    (((result) >> 8) & 0xff)
+#define host_byte(result)   (((result) >> 16) & 0xff)
+#define driver_byte(result) (((result) >> 24) & 0xff)
+#define suggestion(result)  (driver_byte(result) & SUGGEST_MASK)
+
+#define sense_class(sense)  (((sense) >> 4) & 0x7)
+#define sense_error(sense)  ((sense) & 0xf)
+#define sense_valid(sense)  ((sense) & 0x80);
+
+
+#define IDENTIFY_BASE       0x80
+#define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
+		     ((can_disconnect) ?  0x40 : 0) |\
+		     ((lun) & 0x07))
+
+/*
+ *  struct scsi_device::scsi_level values. For SCSI devices other than those
+ *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
+ *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
+ *  variable is visible to the user via sysfs.
+ */
+
+#define SCSI_UNKNOWN    0
+#define SCSI_1          1
+#define SCSI_1_CCS      2
+#define SCSI_2          3
+#define SCSI_3          4        /* SPC */
+#define SCSI_SPC_2      5
+#define SCSI_SPC_3      6
+
+/*
+ * INQ PERIPHERAL QUALIFIERS
+ */
+#define SCSI_INQ_PQ_CON         0x00
+#define SCSI_INQ_PQ_NOT_CON     0x01
+#define SCSI_INQ_PQ_NOT_CAP     0x03
+
+
+/*
+ * Here are some scsi specific ioctl commands which are sometimes useful.
+ *
+ * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
+ */
+
+/* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
+#define SCSI_IOCTL_GET_IDLUN		0x5382
+
+/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
+
+/* Used to obtain the host number of a device. */
+#define SCSI_IOCTL_PROBE_HOST		0x5385
+
+/* Used to obtain the bus number for a device */
+#define SCSI_IOCTL_GET_BUS_NUMBER	0x5386
+
+/* Used to obtain the PCI location of a device */
+#define SCSI_IOCTL_GET_PCI		0x5387
+
+#endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
new file mode 100644
index 000000000000..9d9871c28abd
--- /dev/null
+++ b/include/scsi/scsi_cmnd.h
@@ -0,0 +1,165 @@
+#ifndef _SCSI_SCSI_CMND_H
+#define _SCSI_SCSI_CMND_H
+
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct request;
+struct scatterlist;
+struct scsi_device;
+struct scsi_request;
+
+
+/* embedded in scsi_cmnd */
+struct scsi_pointer {
+	char *ptr;		/* data pointer */
+	int this_residual;	/* left in this buffer */
+	struct scatterlist *buffer;	/* which buffer */
+	int buffers_residual;	/* how many buffers left */
+
+        dma_addr_t dma_handle;
+
+	volatile int Status;
+	volatile int Message;
+	volatile int have_data_in;
+	volatile int sent_command;
+	volatile int phase;
+};
+
+struct scsi_cmnd {
+	int     sc_magic;
+
+	struct scsi_device *device;
+	unsigned short state;
+	unsigned short owner;
+	struct scsi_request *sc_request;
+
+	struct list_head list;  /* scsi_cmnd participates in queue lists */
+
+	struct list_head eh_entry; /* entry for the host eh_cmd_q */
+	int eh_state;		/* Used for state tracking in error handlr */
+	int eh_eflags;		/* Used by error handlr */
+	void (*done) (struct scsi_cmnd *);	/* Mid-level done function */
+
+	/*
+	 * A SCSI Command is assigned a nonzero serial_number when internal_cmnd
+	 * passes it to the driver's queue command function.  The serial_number
+	 * is cleared when scsi_done is entered indicating that the command has
+	 * been completed.  If a timeout occurs, the serial number at the moment
+	 * of timeout is copied into serial_number_at_timeout.  By subsequently
+	 * comparing the serial_number and serial_number_at_timeout fields
+	 * during abort or reset processing, we can detect whether the command
+	 * has already completed.  This also detects cases where the command has
+	 * completed and the SCSI Command structure has already being reused
+	 * for another command, so that we can avoid incorrectly aborting or
+	 * resetting the new command.
+	 * The serial number is only unique per host.
+	 */
+	unsigned long serial_number;
+	unsigned long serial_number_at_timeout;
+
+	int retries;
+	int allowed;
+	int timeout_per_command;
+	int timeout_total;
+	int timeout;
+
+	/*
+	 * We handle the timeout differently if it happens when a reset, 
+	 * abort, etc are in process. 
+	 */
+	unsigned volatile char internal_timeout;
+
+	unsigned char cmd_len;
+	unsigned char old_cmd_len;
+	enum dma_data_direction sc_data_direction;
+	enum dma_data_direction sc_old_data_direction;
+
+	/* These elements define the operation we are about to perform */
+#define MAX_COMMAND_SIZE	16
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+	unsigned request_bufflen;	/* Actual request size */
+
+	struct timer_list eh_timeout;	/* Used to time out the command. */
+	void *request_buffer;		/* Actual requested buffer */
+
+	/* These elements define the operation we ultimately want to perform */
+	unsigned char data_cmnd[MAX_COMMAND_SIZE];
+	unsigned short old_use_sg;	/* We save  use_sg here when requesting
+					 * sense info */
+	unsigned short use_sg;	/* Number of pieces of scatter-gather */
+	unsigned short sglist_len;	/* size of malloc'd scatter-gather list */
+	unsigned short abort_reason;	/* If the mid-level code requests an
+					 * abort, this is the reason. */
+	unsigned bufflen;	/* Size of data buffer */
+	void *buffer;		/* Data buffer */
+
+	unsigned underflow;	/* Return error if less than
+				   this amount is transferred */
+	unsigned old_underflow;	/* save underflow here when reusing the
+				 * command for error handling */
+
+	unsigned transfersize;	/* How much we are guaranteed to
+				   transfer with each SCSI transfer
+				   (ie, between disconnect / 
+				   reconnects.   Probably == sector
+				   size */
+
+	int resid;		/* Number of bytes requested to be
+				   transferred less actual number
+				   transferred (0 if not supported) */
+
+	struct request *request;	/* The command we are
+				   	   working on */
+
+#define SCSI_SENSE_BUFFERSIZE 	96
+	unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE];		/* obtained by REQUEST SENSE
+						 * when CHECK CONDITION is
+						 * received on original command 
+						 * (auto-sense) */
+
+	/* Low-level done function - can be used by low-level driver to point
+	 *        to completion function.  Not used by mid/upper level code. */
+	void (*scsi_done) (struct scsi_cmnd *);
+
+	/*
+	 * The following fields can be written to by the host specific code. 
+	 * Everything else should be left alone. 
+	 */
+	struct scsi_pointer SCp;	/* Scratchpad used by some host adapters */
+
+	unsigned char *host_scribble;	/* The host adapter is allowed to
+					   * call scsi_malloc and get some memory
+					   * and hang it here.     The host adapter
+					   * is also expected to call scsi_free
+					   * to release this memory.  (The memory
+					   * obtained by scsi_malloc is guaranteed
+					   * to be at an address < 16Mb). */
+
+	int result;		/* Status code from lower level driver */
+
+	unsigned char tag;	/* SCSI-II queued command tag */
+	unsigned long pid;	/* Process ID, starts at 0. Unique per host. */
+};
+
+/*
+ * These are the values that scsi_cmd->state can take.
+ */
+#define SCSI_STATE_TIMEOUT         0x1000
+#define SCSI_STATE_FINISHED        0x1001
+#define SCSI_STATE_FAILED          0x1002
+#define SCSI_STATE_QUEUED          0x1003
+#define SCSI_STATE_UNUSED          0x1006
+#define SCSI_STATE_DISCONNECTING   0x1008
+#define SCSI_STATE_INITIALIZING    0x1009
+#define SCSI_STATE_BHQUEUE         0x100a
+#define SCSI_STATE_MLQUEUE         0x100b
+
+
+extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, int);
+extern void scsi_put_command(struct scsi_cmnd *);
+extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int);
+extern void scsi_finish_command(struct scsi_cmnd *cmd);
+
+#endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
new file mode 100644
index 000000000000..12e90934a7a8
--- /dev/null
+++ b/include/scsi/scsi_dbg.h
@@ -0,0 +1,21 @@
+#ifndef _SCSI_SCSI_DBG_H
+#define _SCSI_SCSI_DBG_H
+
+struct scsi_cmnd;
+struct scsi_request;
+
+extern void scsi_print_command(struct scsi_cmnd *);
+extern void __scsi_print_command(unsigned char *);
+extern void scsi_print_sense(const char *, struct scsi_cmnd *);
+extern void scsi_print_req_sense(const char *, struct scsi_request *);
+extern void __scsi_print_sense(const char *name,
+			       const unsigned char *sense_buffer,
+			       int sense_len);
+extern void scsi_print_driverbyte(int);
+extern void scsi_print_hostbyte(int);
+extern void scsi_print_status(unsigned char);
+extern int scsi_print_msg(const unsigned char *);
+extern const char *scsi_sense_key_string(unsigned char);
+extern const char *scsi_extd_sense_format(unsigned char, unsigned char);
+
+#endif /* _SCSI_SCSI_DBG_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
new file mode 100644
index 000000000000..07d974051b0c
--- /dev/null
+++ b/include/scsi/scsi_device.h
@@ -0,0 +1,282 @@
+#ifndef _SCSI_SCSI_DEVICE_H
+#define _SCSI_SCSI_DEVICE_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+struct request_queue;
+struct scsi_cmnd;
+struct scsi_mode_data;
+
+
+/*
+ * sdev state: If you alter this, you also need to alter scsi_sysfs.c
+ * (for the ascii descriptions) and the state model enforcer:
+ * scsi_lib:scsi_device_set_state().
+ */
+enum scsi_device_state {
+	SDEV_CREATED = 1,	/* device created but not added to sysfs
+				 * Only internal commands allowed (for inq) */
+	SDEV_RUNNING,		/* device properly configured
+				 * All commands allowed */
+	SDEV_CANCEL,		/* beginning to delete device
+				 * Only error handler commands allowed */
+	SDEV_DEL,		/* device deleted 
+				 * no commands allowed */
+	SDEV_QUIESCE,		/* Device quiescent.  No block commands
+				 * will be accepted, only specials (which
+				 * originate in the mid-layer) */
+	SDEV_OFFLINE,		/* Device offlined (by error handling or
+				 * user request */
+	SDEV_BLOCK,		/* Device blocked by scsi lld.  No scsi 
+				 * commands from user or midlayer should be issued
+				 * to the scsi lld. */
+};
+
+struct scsi_device {
+	struct Scsi_Host *host;
+	struct request_queue *request_queue;
+
+	/* the next two are protected by the host->host_lock */
+	struct list_head    siblings;   /* list of all devices on this host */
+	struct list_head    same_target_siblings; /* just the devices sharing same target id */
+
+	volatile unsigned short device_busy;	/* commands actually active on low-level */
+	spinlock_t sdev_lock;           /* also the request queue_lock */
+	spinlock_t list_lock;
+	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
+	struct list_head starved_entry;
+	struct scsi_cmnd *current_cmnd;	/* currently active command */
+	unsigned short queue_depth;	/* How deep of a queue we want */
+	unsigned short last_queue_full_depth; /* These two are used by */
+	unsigned short last_queue_full_count; /* scsi_track_queue_full() */
+	unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same
+					   jiffie count on our counter, they
+					   could all be from the same event. */
+
+	unsigned int id, lun, channel;
+
+	unsigned int manufacturer;	/* Manufacturer of device, for using 
+					 * vendor-specific cmd's */
+	unsigned sector_size;	/* size in bytes */
+
+	void *hostdata;		/* available to low-level driver */
+	char devfs_name[256];	/* devfs junk */
+	char type;
+	char scsi_level;
+	char inq_periph_qual;	/* PQ from INQUIRY data */	
+	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
+	unsigned char * inquiry;	/* INQUIRY response data */
+	char * vendor;		/* [back_compat] point into 'inquiry' ... */
+	char * model;		/* ... after scan; point to static string */
+	char * rev;		/* ... "nullnullnullnull" before scan */
+	unsigned char current_tag;	/* current tag */
+	struct scsi_target      *sdev_target;   /* used only for single_lun */
+
+	unsigned int	sdev_bflags; /* black/white flags as also found in
+				 * scsi_devinfo.[hc]. For now used only to
+				 * pass settings from slave_alloc to scsi
+				 * core. */
+	unsigned writeable:1;
+	unsigned removable:1;
+	unsigned changed:1;	/* Data invalid due to media change */
+	unsigned busy:1;	/* Used to prevent races */
+	unsigned lockable:1;	/* Able to prevent media removal */
+	unsigned locked:1;      /* Media removal disabled */
+	unsigned borken:1;	/* Tell the Seagate driver to be 
+				 * painfully slow on this device */
+	unsigned disconnect:1;	/* can disconnect */
+	unsigned soft_reset:1;	/* Uses soft reset option */
+	unsigned sdtr:1;	/* Device supports SDTR messages */
+	unsigned wdtr:1;	/* Device supports WDTR messages */
+	unsigned ppr:1;		/* Device supports PPR messages */
+	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
+	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
+	unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
+	unsigned single_lun:1;	/* Indicates we should only allow I/O to
+				 * one of the luns for the device at a 
+				 * time. */
+	unsigned was_reset:1;	/* There was a bus reset on the bus for 
+				 * this device */
+	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
+				     * because we did a bus reset. */
+	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
+	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
+	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
+	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
+	unsigned no_start_on_add:1;	/* do not issue start on add */
+	unsigned allow_restart:1; /* issue START_UNIT in error handler */
+	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
+	unsigned select_no_atn:1;
+	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
+	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
+
+	unsigned int device_blocked;	/* Device returned QUEUE_FULL. */
+
+	unsigned int max_device_blocked; /* what device_blocked counts down from  */
+#define SCSI_DEFAULT_DEVICE_BLOCKED	3
+
+	atomic_t iorequest_cnt;
+	atomic_t iodone_cnt;
+	atomic_t ioerr_cnt;
+
+	int timeout;
+
+	struct device		sdev_gendev;
+	struct class_device	sdev_classdev;
+
+	enum scsi_device_state sdev_state;
+	unsigned long		sdev_data[0];
+} __attribute__((aligned(sizeof(unsigned long))));
+#define	to_scsi_device(d)	\
+	container_of(d, struct scsi_device, sdev_gendev)
+#define	class_to_sdev(d)	\
+	container_of(d, struct scsi_device, sdev_classdev)
+#define transport_class_to_sdev(class_dev) \
+	to_scsi_device(class_dev->dev)
+
+/*
+ * scsi_target: representation of a scsi target, for now, this is only
+ * used for single_lun devices. If no one has active IO to the target,
+ * starget_sdev_user is NULL, else it points to the active sdev.
+ */
+struct scsi_target {
+	struct scsi_device	*starget_sdev_user;
+	struct list_head	siblings;
+	struct list_head	devices;
+	struct device		dev;
+	unsigned int		reap_ref; /* protected by the host lock */
+	unsigned int		channel;
+	unsigned int		id; /* target id ... replace
+				     * scsi_device.id eventually */
+	unsigned long		create:1; /* signal that it needs to be added */
+	unsigned long		starget_data[0];
+} __attribute__((aligned(sizeof(unsigned long))));
+
+#define to_scsi_target(d)	container_of(d, struct scsi_target, dev)
+static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
+{
+	return to_scsi_target(sdev->sdev_gendev.parent);
+}
+#define transport_class_to_starget(class_dev) \
+	to_scsi_target(class_dev->dev)
+
+extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
+		uint, uint, uint, void *hostdata);
+#define scsi_add_device(host, channel, target, lun) \
+	__scsi_add_device(host, channel, target, lun, NULL)
+extern void scsi_remove_device(struct scsi_device *);
+extern int scsi_device_cancel(struct scsi_device *, int);
+
+extern int scsi_device_get(struct scsi_device *);
+extern void scsi_device_put(struct scsi_device *);
+extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
+					      uint, uint, uint);
+extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
+						uint, uint, uint);
+extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
+							uint);
+extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
+							  uint);
+extern void starget_for_each_device(struct scsi_target *, void *,
+		     void (*fn)(struct scsi_device *, void *));
+
+/* only exposed to implement shost_for_each_device */
+extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
+						  struct scsi_device *);
+
+/**
+ * shost_for_each_device  -  iterate over all devices of a host
+ * @sdev:	iterator
+ * @host:	host whiches devices we want to iterate over
+ *
+ * This traverses over each devices of @shost.  The devices have
+ * a reference that must be released by scsi_host_put when breaking
+ * out of the loop.
+ */
+#define shost_for_each_device(sdev, shost) \
+	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
+	     (sdev); \
+	     (sdev) = __scsi_iterate_devices((shost), (sdev)))
+
+/**
+ * __shost_for_each_device  -  iterate over all devices of a host (UNLOCKED)
+ * @sdev:	iterator
+ * @host:	host whiches devices we want to iterate over
+ *
+ * This traverses over each devices of @shost.  It does _not_ take a
+ * reference on the scsi_device, thus it the whole loop must be protected
+ * by shost->host_lock.
+ *
+ * Note:  The only reason why drivers would want to use this is because
+ * they're need to access the device list in irq context.  Otherwise you
+ * really want to use shost_for_each_device instead.
+ */
+#define __shost_for_each_device(sdev, shost) \
+	list_for_each_entry((sdev), &((shost)->__devices), siblings)
+
+extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
+extern int scsi_track_queue_full(struct scsi_device *, int);
+
+extern int scsi_set_medium_removal(struct scsi_device *, char);
+
+extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
+			   unsigned char *buffer, int len, int timeout,
+			   int retries, struct scsi_mode_data *data);
+extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
+				int retries);
+extern int scsi_device_set_state(struct scsi_device *sdev,
+				 enum scsi_device_state state);
+extern int scsi_device_quiesce(struct scsi_device *sdev);
+extern void scsi_device_resume(struct scsi_device *sdev);
+extern void scsi_target_quiesce(struct scsi_target *);
+extern void scsi_target_resume(struct scsi_target *);
+extern void scsi_scan_target(struct device *parent, unsigned int channel,
+			     unsigned int id, unsigned int lun, int rescan);
+extern void scsi_target_reap(struct scsi_target *);
+extern void scsi_target_block(struct device *);
+extern void scsi_target_unblock(struct device *);
+extern void scsi_remove_target(struct device *);
+extern const char *scsi_device_state_name(enum scsi_device_state);
+extern int scsi_is_sdev_device(const struct device *);
+extern int scsi_is_target_device(const struct device *);
+static inline int scsi_device_online(struct scsi_device *sdev)
+{
+	return sdev->sdev_state != SDEV_OFFLINE;
+}
+
+/* accessor functions for the SCSI parameters */
+static inline int scsi_device_sync(struct scsi_device *sdev)
+{
+	return sdev->sdtr;
+}
+static inline int scsi_device_wide(struct scsi_device *sdev)
+{
+	return sdev->wdtr;
+}
+static inline int scsi_device_dt(struct scsi_device *sdev)
+{
+	return sdev->ppr;
+}
+static inline int scsi_device_dt_only(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return (sdev->inquiry[56] & 0x0c) == 0x04;
+}
+static inline int scsi_device_ius(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x01;
+}
+static inline int scsi_device_qas(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x02;
+}
+#endif /* _SCSI_SCSI_DEVICE_H */
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
new file mode 100644
index 000000000000..174101b2069b
--- /dev/null
+++ b/include/scsi/scsi_devinfo.h
@@ -0,0 +1,31 @@
+#ifndef _SCSI_SCSI_DEVINFO_H
+#define _SCSI_SCSI_DEVINFO_H
+/*
+ * Flags for SCSI devices that need special treatment
+ */
+#define BLIST_NOLUN     	0x001	/* Only scan LUN 0 */
+#define BLIST_FORCELUN  	0x002	/* Known to have LUNs, force scanning,
+					   deprecated: Use max_luns=N */
+#define BLIST_BORKEN    	0x004	/* Flag for broken handshaking */
+#define BLIST_KEY       	0x008	/* unlock by special command */
+#define BLIST_SINGLELUN 	0x010	/* Do not use LUNs in parallel */
+#define BLIST_NOTQ		0x020	/* Buggy Tagged Command Queuing */
+#define BLIST_SPARSELUN 	0x040	/* Non consecutive LUN numbering */
+#define BLIST_MAX5LUN		0x080	/* Avoid LUNS >= 5 */
+#define BLIST_ISROM     	0x100	/* Treat as (removable) CD-ROM */
+#define BLIST_LARGELUN		0x200	/* LUNs past 7 on a SCSI-2 device */
+#define BLIST_INQUIRY_36	0x400	/* override additional length field */
+#define BLIST_INQUIRY_58	0x800	/* ... for broken inquiry responses */
+#define BLIST_NOSTARTONADD	0x1000	/* do not do automatic start on add */
+#define BLIST_MS_SKIP_PAGE_08	0x2000	/* do not send ms page 0x08 */
+#define BLIST_MS_SKIP_PAGE_3F	0x4000	/* do not send ms page 0x3f */
+#define BLIST_USE_10_BYTE_MS	0x8000	/* use 10 byte ms before 6 byte ms */
+#define BLIST_MS_192_BYTES_FOR_3F	0x10000	/*  192 byte ms page 0x3f request */
+#define BLIST_REPORTLUN2	0x20000	/* try REPORT_LUNS even for SCSI-2 devs
+ 					   (if HBA supports more than 8 LUNs) */
+#define BLIST_NOREPORTLUN	0x40000	/* don't try REPORT_LUNS scan (SCSI-3 devs) */
+#define BLIST_NOT_LOCKABLE	0x80000	/* don't use PREVENT-ALLOW commands */
+#define BLIST_NO_ULD_ATTACH	0x100000 /* device is actually for RAID config */
+#define BLIST_SELECT_NO_ATN	0x200000 /* select without ATN */
+#define BLIST_RETRY_HWERROR	0x400000 /* retry HARDWARE_ERROR */
+#endif
diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h
new file mode 100644
index 000000000000..850dfa877fda
--- /dev/null
+++ b/include/scsi/scsi_driver.h
@@ -0,0 +1,31 @@
+#ifndef _SCSI_SCSI_DRIVER_H
+#define _SCSI_SCSI_DRIVER_H
+
+#include <linux/device.h>
+
+struct module;
+struct scsi_cmnd;
+
+
+struct scsi_driver {
+	struct module		*owner;
+	struct device_driver	gendrv;
+
+	int (*init_command)(struct scsi_cmnd *);
+	void (*rescan)(struct device *);
+	int (*issue_flush)(struct device *, sector_t *);
+	int (*prepare_flush)(struct request_queue *, struct request *);
+	void (*end_flush)(struct request_queue *, struct request *);
+};
+#define to_scsi_driver(drv) \
+	container_of((drv), struct scsi_driver, gendrv)
+
+extern int scsi_register_driver(struct device_driver *);
+#define scsi_unregister_driver(drv) \
+	driver_unregister(drv);
+
+extern int scsi_register_interface(struct class_interface *);
+#define scsi_unregister_interface(intf) \
+	class_interface_unregister(intf)
+
+#endif /* _SCSI_SCSI_DRIVER_H */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
new file mode 100644
index 000000000000..80557f879e3e
--- /dev/null
+++ b/include/scsi/scsi_eh.h
@@ -0,0 +1,63 @@
+#ifndef _SCSI_SCSI_EH_H
+#define _SCSI_SCSI_EH_H
+
+struct scsi_cmnd;
+struct scsi_device;
+struct scsi_request;
+struct Scsi_Host;
+
+/*
+ * This is a slightly modified SCSI sense "descriptor" format header.
+ * The addition is to allow the 0x70 and 0x71 response codes. The idea
+ * is to place the salient data from either "fixed" or "descriptor" sense
+ * format into one structure to ease application processing.
+ *
+ * The original sense buffer should be kept around for those cases
+ * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
+ */
+struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
+	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
+	u8 sense_key;
+	u8 asc;
+	u8 ascq;
+	u8 byte4;
+	u8 byte5;
+	u8 byte6;
+	u8 additional_length;	/* always 0 for fixed sense format */
+};
+
+
+extern void scsi_add_timer(struct scsi_cmnd *, int,
+		void (*)(struct scsi_cmnd *));
+extern int scsi_delete_timer(struct scsi_cmnd *);
+extern void scsi_report_bus_reset(struct Scsi_Host *, int);
+extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
+extern int scsi_block_when_processing_errors(struct scsi_device *);
+extern int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+		struct scsi_sense_hdr *sshdr);
+extern int scsi_request_normalize_sense(struct scsi_request *sreq,
+		struct scsi_sense_hdr *sshdr);
+extern int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
+		struct scsi_sense_hdr *sshdr);
+
+static inline int scsi_sense_is_deferred(struct scsi_sense_hdr *sshdr)
+{
+	return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
+}
+
+extern const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				       int desc_type);
+
+extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
+				   u64 * info_out);
+ 
+/*
+ * Reset request from external source
+ */
+#define SCSI_TRY_RESET_DEVICE	1
+#define SCSI_TRY_RESET_BUS	2
+#define SCSI_TRY_RESET_HOST	3
+
+extern int scsi_reset_provider(struct scsi_device *, int);
+
+#endif /* _SCSI_SCSI_EH_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
new file mode 100644
index 000000000000..27f2c4e8943a
--- /dev/null
+++ b/include/scsi/scsi_host.h
@@ -0,0 +1,642 @@
+#ifndef _SCSI_SCSI_HOST_H
+#define _SCSI_SCSI_HOST_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+struct block_device;
+struct module;
+struct scsi_cmnd;
+struct scsi_device;
+struct Scsi_Host;
+struct scsi_host_cmd_pool;
+struct scsi_transport_template;
+
+
+/*
+ * The various choices mean:
+ * NONE: Self evident.	Host adapter is not capable of scatter-gather.
+ * ALL:	 Means that the host adapter module can do scatter-gather,
+ *	 and that there is no limit to the size of the table to which
+ *	 we scatter/gather data.
+ * Anything else:  Indicates the maximum number of chains that can be
+ *	 used in one scatter-gather request.
+ */
+#define SG_NONE 0
+#define SG_ALL 0xff
+
+
+#define DISABLE_CLUSTERING 0
+#define ENABLE_CLUSTERING 1
+
+enum scsi_eh_timer_return {
+	EH_NOT_HANDLED,
+	EH_HANDLED,
+	EH_RESET_TIMER,
+};
+
+
+struct scsi_host_template {
+	struct module *module;
+	const char *name;
+
+	/*
+	 * Used to initialize old-style drivers.  For new-style drivers
+	 * just perform all work in your module initialization function.
+	 *
+	 * Status:  OBSOLETE
+	 */
+	int (* detect)(struct scsi_host_template *);
+
+	/*
+	 * Used as unload callback for hosts with old-style drivers.
+	 *
+	 * Status: OBSOLETE
+	 */
+	int (* release)(struct Scsi_Host *);
+
+	/*
+	 * The info function will return whatever useful information the
+	 * developer sees fit.  If not provided, then the name field will
+	 * be used instead.
+	 *
+	 * Status: OPTIONAL
+	 */
+	const char *(* info)(struct Scsi_Host *);
+
+	/*
+	 * Ioctl interface
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+
+
+#ifdef CONFIG_COMPAT
+	/* 
+	 * Compat handler. Handle 32bit ABI.
+	 * When unknown ioctl is passed return -ENOIOCTLCMD.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* compat_ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+#endif
+
+	/*
+	 * The queuecommand function is used to queue up a scsi
+	 * command block to the LLDD.  When the driver finished
+	 * processing the command the done callback is invoked.
+	 *
+	 * If queuecommand returns 0, then the HBA has accepted the
+	 * command.  The done() function must be called on the command
+	 * when the driver has finished with it. (you may call done on the
+	 * command before queuecommand returns, but in this case you
+	 * *must* return 0 from queuecommand).
+	 *
+	 * Queuecommand may also reject the command, in which case it may
+	 * not touch the command and must not call done() for it.
+	 *
+	 * There are two possible rejection returns:
+	 *
+	 *   SCSI_MLQUEUE_DEVICE_BUSY: Block this device temporarily, but
+	 *   allow commands to other devices serviced by this host.
+	 *
+	 *   SCSI_MLQUEUE_HOST_BUSY: Block all devices served by this
+	 *   host temporarily.
+	 *
+         * For compatibility, any other non-zero return is treated the
+         * same as SCSI_MLQUEUE_HOST_BUSY.
+	 *
+	 * NOTE: "temporarily" means either until the next command for#
+	 * this device/host completes, or a period of time determined by
+	 * I/O pressure in the system if there are no other outstanding
+	 * commands.
+	 *
+	 * STATUS: REQUIRED
+	 */
+	int (* queuecommand)(struct scsi_cmnd *,
+			     void (*done)(struct scsi_cmnd *));
+
+	/*
+	 * This is an error handling strategy routine.  You don't need to
+	 * define one of these if you don't want to - there is a default
+	 * routine that is present that should work in most cases.  For those
+	 * driver authors that have the inclination and ability to write their
+	 * own strategy routine, this is where it is specified.  Note - the
+	 * strategy routine is *ALWAYS* run in the context of the kernel eh
+	 * thread.  Thus you are guaranteed to *NOT* be in an interrupt
+	 * handler when you execute this, and you are also guaranteed to
+	 * *NOT* have any other commands being queued while you are in the
+	 * strategy routine. When you return from this function, operations
+	 * return to normal.
+	 *
+	 * See scsi_error.c scsi_unjam_host for additional comments about
+	 * what this function should and should not be attempting to do.
+	 *
+	 * Status: REQUIRED	(at least one of them)
+	 */
+	int (* eh_strategy_handler)(struct Scsi_Host *);
+	int (* eh_abort_handler)(struct scsi_cmnd *);
+	int (* eh_device_reset_handler)(struct scsi_cmnd *);
+	int (* eh_bus_reset_handler)(struct scsi_cmnd *);
+	int (* eh_host_reset_handler)(struct scsi_cmnd *);
+
+	/*
+	 * This is an optional routine to notify the host that the scsi
+	 * timer just fired.  The returns tell the timer routine what to
+	 * do about this:
+	 *
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_NOT_HANDLED	Begin normal error recovery
+	 *
+	 * Status: OPTIONAL
+	 */
+	enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
+	/*
+	 * Before the mid layer attempts to scan for a new device where none
+	 * currently exists, it will call this entry in your driver.  Should
+	 * your driver need to allocate any structs or perform any other init
+	 * items in order to send commands to a currently unused target/lun
+	 * combo, then this is where you can perform those allocations.  This
+	 * is specifically so that drivers won't have to perform any kind of
+	 * "is this a new device" checks in their queuecommand routine,
+	 * thereby making the hot path a bit quicker.
+	 *
+	 * Return values: 0 on success, non-0 on failure
+	 *
+	 * Deallocation:  If we didn't find any devices at this ID, you will
+	 * get an immediate call to slave_destroy().  If we find something
+	 * here then you will get a call to slave_configure(), then the
+	 * device will be used for however long it is kept around, then when
+	 * the device is removed from the system (or * possibly at reboot
+	 * time), you will then get a call to slave_destroy().  This is
+	 * assuming you implement slave_configure and slave_destroy.
+	 * However, if you allocate memory and hang it off the device struct,
+	 * then you must implement the slave_destroy() routine at a minimum
+	 * in order to avoid leaking memory
+	 * each time a device is tore down.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_alloc)(struct scsi_device *);
+
+	/*
+	 * Once the device has responded to an INQUIRY and we know the
+	 * device is online, we call into the low level driver with the
+	 * struct scsi_device *.  If the low level device driver implements
+	 * this function, it *must* perform the task of setting the queue
+	 * depth on the device.  All other tasks are optional and depend
+	 * on what the driver supports and various implementation details.
+	 * 
+	 * Things currently recommended to be handled at this time include:
+	 *
+	 * 1.  Setting the device queue depth.  Proper setting of this is
+	 *     described in the comments for scsi_adjust_queue_depth.
+	 * 2.  Determining if the device supports the various synchronous
+	 *     negotiation protocols.  The device struct will already have
+	 *     responded to INQUIRY and the results of the standard items
+	 *     will have been shoved into the various device flag bits, eg.
+	 *     device->sdtr will be true if the device supports SDTR messages.
+	 * 3.  Allocating command structs that the device will need.
+	 * 4.  Setting the default timeout on this device (if needed).
+	 * 5.  Anything else the low level driver might want to do on a device
+	 *     specific setup basis...
+	 * 6.  Return 0 on success, non-0 on error.  The device will be marked
+	 *     as offline on error so that no access will occur.  If you return
+	 *     non-0, your slave_destroy routine will never get called for this
+	 *     device, so don't leave any loose memory hanging around, clean
+	 *     up after yourself before returning non-0
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_configure)(struct scsi_device *);
+
+	/*
+	 * Immediately prior to deallocating the device and after all activity
+	 * has ceased the mid layer calls this point so that the low level
+	 * driver may completely detach itself from the scsi device and vice
+	 * versa.  The low level driver is responsible for freeing any memory
+	 * it allocated in the slave_alloc or slave_configure calls. 
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* slave_destroy)(struct scsi_device *);
+
+	/*
+	 * fill in this function to allow the queue depth of this host
+	 * to be changeable (on a per device basis).  returns either
+	 * the current queue depth setting (may be different from what
+	 * was passed in) or an error.  An error should only be
+	 * returned if the requested depth is legal but the driver was
+	 * unable to set it.  If the requested depth is illegal, the
+	 * driver should set and return the closest legal queue depth.
+	 *
+	 */
+	int (* change_queue_depth)(struct scsi_device *, int);
+
+	/*
+	 * fill in this function to allow the changing of tag types
+	 * (this also allows the enabling/disabling of tag command
+	 * queueing).  An error should only be returned if something
+	 * went wrong in the driver while trying to set the tag type.
+	 * If the driver doesn't support the requested tag type, then
+	 * it should set the closest type it does support without
+	 * returning an error.  Returns the actual tag type set.
+	 */
+	int (* change_queue_type)(struct scsi_device *, int);
+
+	/*
+	 * This function determines the bios parameters for a given
+	 * harddisk.  These tend to be numbers that are made up by
+	 * the host adapter.  Parameters:
+	 * size, device, list (heads, sectors, cylinders)
+	 *
+	 * Status: OPTIONAL */
+	int (* bios_param)(struct scsi_device *, struct block_device *,
+			sector_t, int []);
+
+	/*
+	 * Can be used to export driver statistics and other infos to the
+	 * world outside the kernel ie. userspace and it also provides an
+	 * interface to feed the driver with information.
+	 *
+	 * Status: OBSOLETE
+	 */
+	int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
+
+	/*
+	 * Name of proc directory
+	 */
+	char *proc_name;
+
+	/*
+	 * Used to store the procfs directory if a driver implements the
+	 * proc_info method.
+	 */
+	struct proc_dir_entry *proc_dir;
+
+	/*
+	 * This determines if we will use a non-interrupt driven
+	 * or an interrupt driven scheme,  It is set to the maximum number
+	 * of simultaneous commands a given host adapter will accept.
+	 */
+	int can_queue;
+
+	/*
+	 * In many instances, especially where disconnect / reconnect are
+	 * supported, our host also has an ID on the SCSI bus.  If this is
+	 * the case, then it must be reserved.  Please set this_id to -1 if
+	 * your setup is in single initiator mode, and the host lacks an
+	 * ID.
+	 */
+	int this_id;
+
+	/*
+	 * This determines the degree to which the host adapter is capable
+	 * of scatter-gather.
+	 */
+	unsigned short sg_tablesize;
+
+	/*
+	 * If the host adapter has limitations beside segment count
+	 */
+	unsigned short max_sectors;
+
+	/*
+	 * dma scatter gather segment boundary limit. a segment crossing this
+	 * boundary will be split in two.
+	 */
+	unsigned long dma_boundary;
+
+	/*
+	 * This specifies "machine infinity" for host templates which don't
+	 * limit the transfer size.  Note this limit represents an absolute
+	 * maximum, and may be over the transfer limits allowed for
+	 * individual devices (e.g. 256 for SCSI-1)
+	 */
+#define SCSI_DEFAULT_MAX_SECTORS	1024
+
+	/*
+	 * True if this host adapter can make good use of linked commands.
+	 * This will allow more than one command to be queued to a given
+	 * unit on a given host.  Set this to the maximum number of command
+	 * blocks to be provided for each device.  Set this to 1 for one
+	 * command block per lun, 2 for two, etc.  Do not set this to 0.
+	 * You should make sure that the host adapter will do the right thing
+	 * before you try setting this above 1.
+	 */
+	short cmd_per_lun;
+
+	/*
+	 * present contains counter indicating how many boards of this
+	 * type were found when we did the scan.
+	 */
+	unsigned char present;
+
+	/*
+	 * true if this host adapter uses unchecked DMA onto an ISA bus.
+	 */
+	unsigned unchecked_isa_dma:1;
+
+	/*
+	 * true if this host adapter can make good use of clustering.
+	 * I originally thought that if the tablesize was large that it
+	 * was a waste of CPU cycles to prepare a cluster list, but
+	 * it works out that the Buslogic is faster if you use a smaller
+	 * number of segments (i.e. use clustering).  I guess it is
+	 * inefficient.
+	 */
+	unsigned use_clustering:1;
+
+	/*
+	 * True for emulated SCSI host adapters (e.g. ATAPI)
+	 */
+	unsigned emulated:1;
+
+	/*
+	 * True if the low-level driver performs its own reset-settle delays.
+	 */
+	unsigned skip_settle_delay:1;
+
+	/*
+	 * ordered write support
+	 */
+	unsigned ordered_flush:1;
+	unsigned ordered_tag:1;
+
+	/*
+	 * Countdown for host blocking with no commands outstanding
+	 */
+	unsigned int max_host_blocked;
+
+	/*
+	 * Default value for the blocking.  If the queue is empty,
+	 * host_blocked counts down in the request_fn until it restarts
+	 * host operations as zero is reached.  
+	 *
+	 * FIXME: This should probably be a value in the template
+	 */
+#define SCSI_DEFAULT_HOST_BLOCKED	7
+
+	/*
+	 * Pointer to the sysfs class properties for this host, NULL terminated.
+	 */
+	struct class_device_attribute **shost_attrs;
+
+	/*
+	 * Pointer to the SCSI device properties for this host, NULL terminated.
+	 */
+	struct device_attribute **sdev_attrs;
+
+	/*
+	 * List of hosts per template.
+	 *
+	 * This is only for use by scsi_module.c for legacy templates.
+	 * For these access to it is synchronized implicitly by
+	 * module_init/module_exit.
+	 */
+	struct list_head legacy_hosts;
+};
+
+/*
+ * shost states
+ */
+enum {
+	SHOST_ADD,
+	SHOST_DEL,
+	SHOST_CANCEL,
+	SHOST_RECOVERY,
+};
+
+struct Scsi_Host {
+	/*
+	 * __devices is protected by the host_lock, but you should
+	 * usually use scsi_device_lookup / shost_for_each_device
+	 * to access it and don't care about locking yourself.
+	 * In the rare case of beeing in irq context you can use
+	 * their __ prefixed variants with the lock held. NEVER
+	 * access this list directly from a driver.
+	 */
+	struct list_head	__devices;
+	struct list_head	__targets;
+	
+	struct scsi_host_cmd_pool *cmd_pool;
+	spinlock_t		free_list_lock;
+	struct list_head	free_list; /* backup store of cmd structs */
+	struct list_head	starved_list;
+
+	spinlock_t		default_lock;
+	spinlock_t		*host_lock;
+
+	struct semaphore	scan_mutex;/* serialize scanning activity */
+
+	struct list_head	eh_cmd_q;
+	struct task_struct    * ehandler;  /* Error recovery thread. */
+	struct semaphore      * eh_wait;   /* The error recovery thread waits
+					      on this. */
+	struct completion     * eh_notify; /* wait for eh to begin or end */
+	struct semaphore      * eh_action; /* Wait for specific actions on the
+                                          host. */
+	unsigned int            eh_active:1; /* Indicates the eh thread is awake and active if
+                                          this is true. */
+	unsigned int            eh_kill:1; /* set when killing the eh thread */
+	wait_queue_head_t       host_wait;
+	struct scsi_host_template *hostt;
+	struct scsi_transport_template *transportt;
+	volatile unsigned short host_busy;   /* commands actually active on low-level */
+	volatile unsigned short host_failed; /* commands that failed. */
+    
+	unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+	int resetting; /* if set, it means that last_reset is a valid value */
+	unsigned long last_reset;
+
+	/*
+	 * These three parameters can be used to allow for wide scsi,
+	 * and for host adapters that support multiple busses
+	 * The first two should be set to 1 more than the actual max id
+	 * or lun (i.e. 8 for normal systems).
+	 */
+	unsigned int max_id;
+	unsigned int max_lun;
+	unsigned int max_channel;
+
+	/*
+	 * This is a unique identifier that must be assigned so that we
+	 * have some way of identifying each detected host adapter properly
+	 * and uniquely.  For hosts that do not support more than one card
+	 * in the system at one time, this does not need to be set.  It is
+	 * initialized to 0 in scsi_register.
+	 */
+	unsigned int unique_id;
+
+	/*
+	 * The maximum length of SCSI commands that this host can accept.
+	 * Probably 12 for most host adapters, but could be 16 for others.
+	 * For drivers that don't set this field, a value of 12 is
+	 * assumed.  I am leaving this as a number rather than a bit
+	 * because you never know what subsequent SCSI standards might do
+	 * (i.e. could there be a 20 byte or a 24-byte command a few years
+	 * down the road?).  
+	 */
+	unsigned char max_cmd_len;
+
+	int this_id;
+	int can_queue;
+	short cmd_per_lun;
+	short unsigned int sg_tablesize;
+	short unsigned int max_sectors;
+	unsigned long dma_boundary;
+	/* 
+	 * Used to assign serial numbers to the cmds.
+	 * Protected by the host lock.
+	 */
+	unsigned long cmd_serial_number, cmd_pid; 
+	
+	unsigned unchecked_isa_dma:1;
+	unsigned use_clustering:1;
+	unsigned use_blk_tcq:1;
+
+	/*
+	 * Host has requested that no further requests come through for the
+	 * time being.
+	 */
+	unsigned host_self_blocked:1;
+    
+	/*
+	 * Host uses correct SCSI ordering not PC ordering. The bit is
+	 * set for the minority of drivers whose authors actually read
+	 * the spec ;)
+	 */
+	unsigned reverse_ordering:1;
+
+	/*
+	 * ordered write support
+	 */
+	unsigned ordered_flush:1;
+	unsigned ordered_tag:1;
+
+	/*
+	 * Optional work queue to be utilized by the transport
+	 */
+	char work_q_name[KOBJ_NAME_LEN];
+	struct workqueue_struct *work_q;
+
+	/*
+	 * Host has rejected a command because it was busy.
+	 */
+	unsigned int host_blocked;
+
+	/*
+	 * Value host_blocked counts down from
+	 */
+	unsigned int max_host_blocked;
+
+	/* legacy crap */
+	unsigned long base;
+	unsigned long io_port;
+	unsigned char n_io_port;
+	unsigned char dma_channel;
+	unsigned int  irq;
+	
+
+	unsigned long shost_state;
+
+	/* ldm bits */
+	struct device		shost_gendev;
+	struct class_device	shost_classdev;
+
+	/*
+	 * List of hosts per template.
+	 *
+	 * This is only for use by scsi_module.c for legacy templates.
+	 * For these access to it is synchronized implicitly by
+	 * module_init/module_exit.
+	 */
+	struct list_head sht_legacy_list;
+
+	/*
+	 * Points to the transport data (if any) which is allocated
+	 * separately
+	 */
+	void *shost_data;
+
+	/*
+	 * We should ensure that this is aligned, both for better performance
+	 * and also because some compilers (m68k) don't automatically force
+	 * alignment to a long boundary.
+	 */
+	unsigned long hostdata[0]  /* Used for storage of host specific stuff */
+		__attribute__ ((aligned (sizeof(unsigned long))));
+};
+
+#define		class_to_shost(d)	\
+	container_of(d, struct Scsi_Host, shost_classdev)
+
+int scsi_is_host_device(const struct device *);
+
+static inline struct Scsi_Host *dev_to_shost(struct device *dev)
+{
+	while (!scsi_is_host_device(dev)) {
+		if (!dev->parent)
+			return NULL;
+		dev = dev->parent;
+	}
+	return container_of(dev, struct Scsi_Host, shost_gendev);
+}
+
+extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);
+extern void scsi_flush_work(struct Scsi_Host *);
+
+extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
+extern int __must_check scsi_add_host(struct Scsi_Host *, struct device *);
+extern void scsi_scan_host(struct Scsi_Host *);
+extern void scsi_scan_single_target(struct Scsi_Host *, unsigned int,
+	unsigned int);
+extern void scsi_rescan_device(struct device *);
+extern void scsi_remove_host(struct Scsi_Host *);
+extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
+extern void scsi_host_put(struct Scsi_Host *t);
+extern struct Scsi_Host *scsi_host_lookup(unsigned short);
+
+extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
+
+static inline void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
+{
+	shost->host_lock = lock;
+}
+
+static inline void scsi_set_device(struct Scsi_Host *shost,
+                                   struct device *dev)
+{
+        shost->shost_gendev.parent = dev;
+}
+
+static inline struct device *scsi_get_device(struct Scsi_Host *shost)
+{
+        return shost->shost_gendev.parent;
+}
+
+extern void scsi_unblock_requests(struct Scsi_Host *);
+extern void scsi_block_requests(struct Scsi_Host *);
+
+struct class_container;
+/*
+ * These two functions are used to allocate and free a pseudo device
+ * which will connect to the host adapter itself rather than any
+ * physical device.  You must deallocate when you are done with the
+ * thing.  This physical pseudo-device isn't real and won't be available
+ * from any high-level drivers.
+ */
+extern void scsi_free_host_dev(struct scsi_device *);
+extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
+
+/* legacy interfaces */
+extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
+extern void scsi_unregister(struct Scsi_Host *);
+
+#endif /* _SCSI_SCSI_HOST_H */
diff --git a/include/scsi/scsi_ioctl.h b/include/scsi/scsi_ioctl.h
new file mode 100644
index 000000000000..d4be4d92d586
--- /dev/null
+++ b/include/scsi/scsi_ioctl.h
@@ -0,0 +1,50 @@
+#ifndef _SCSI_IOCTL_H
+#define _SCSI_IOCTL_H 
+
+#define SCSI_IOCTL_SEND_COMMAND 1
+#define SCSI_IOCTL_TEST_UNIT_READY 2
+#define SCSI_IOCTL_BENCHMARK_COMMAND 3
+#define SCSI_IOCTL_SYNC 4			/* Request synchronous parameters */
+#define SCSI_IOCTL_START_UNIT 5
+#define SCSI_IOCTL_STOP_UNIT 6
+/* The door lock/unlock constants are compatible with Sun constants for
+   the cdrom */
+#define SCSI_IOCTL_DOORLOCK 0x5380		/* lock the eject mechanism */
+#define SCSI_IOCTL_DOORUNLOCK 0x5381		/* unlock the mechanism	  */
+
+#define	SCSI_REMOVAL_PREVENT	1
+#define	SCSI_REMOVAL_ALLOW	0
+
+#ifdef __KERNEL__
+
+struct scsi_device;
+
+/*
+ * Structures used for scsi_ioctl et al.
+ */
+
+typedef struct scsi_ioctl_command {
+	unsigned int inlen;
+	unsigned int outlen;
+	unsigned char data[0];
+} Scsi_Ioctl_Command;
+
+typedef struct scsi_idlun {
+	__u32 dev_id;
+	__u32 host_unique_id;
+} Scsi_Idlun;
+
+/* Fibre Channel WWN, port_id struct */
+typedef struct scsi_fctargaddress {
+	__u32 host_port_id;
+	unsigned char host_wwn[8]; // include NULL term.
+} Scsi_FCTargAddress;
+
+extern int scsi_ioctl(struct scsi_device *, int, void __user *);
+extern int scsi_ioctl_send_command(struct scsi_device *,
+				   struct scsi_ioctl_command __user *);
+extern int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
+				   void __user *arg, struct file *filp);
+
+#endif /* __KERNEL__ */
+#endif /* _SCSI_IOCTL_H */
diff --git a/include/scsi/scsi_request.h b/include/scsi/scsi_request.h
new file mode 100644
index 000000000000..98719407d554
--- /dev/null
+++ b/include/scsi/scsi_request.h
@@ -0,0 +1,73 @@
+#ifndef _SCSI_SCSI_REQUEST_H
+#define _SCSI_SCSI_REQUEST_H
+
+#include <scsi/scsi_cmnd.h>
+
+struct request;
+struct scsi_cmnd;
+struct scsi_device;
+struct Scsi_Host;
+
+
+/*
+ * This is essentially a slimmed down version of Scsi_Cmnd.  The point of
+ * having this is that requests that are injected into the queue as result
+ * of things like ioctls and character devices shouldn't be using a
+ * Scsi_Cmnd until such a time that the command is actually at the head
+ * of the queue and being sent to the driver.
+ */
+struct scsi_request {
+	int     sr_magic;
+	int     sr_result;	/* Status code from lower level driver */
+	unsigned char sr_sense_buffer[SCSI_SENSE_BUFFERSIZE];		/* obtained by REQUEST SENSE
+						 * when CHECK CONDITION is
+						 * received on original command 
+						 * (auto-sense) */
+
+	struct Scsi_Host *sr_host;
+	struct scsi_device *sr_device;
+	struct scsi_cmnd *sr_command;
+	struct request *sr_request;	/* A copy of the command we are
+				   working on */
+	unsigned sr_bufflen;	/* Size of data buffer */
+	void *sr_buffer;		/* Data buffer */
+	int sr_allowed;
+	enum dma_data_direction sr_data_direction;
+	unsigned char sr_cmd_len;
+	unsigned char sr_cmnd[MAX_COMMAND_SIZE];
+	void (*sr_done) (struct scsi_cmnd *);	/* Mid-level done function */
+	int sr_timeout_per_command;
+	unsigned short sr_use_sg;	/* Number of pieces of scatter-gather */
+	unsigned short sr_sglist_len;	/* size of malloc'd scatter-gather list */
+	unsigned sr_underflow;	/* Return error if less than
+				   this amount is transferred */
+ 	void *upper_private_data;	/* reserved for owner (usually upper
+ 					   level driver) of this request */
+};
+
+extern struct scsi_request *scsi_allocate_request(struct scsi_device *, int);
+extern void scsi_release_request(struct scsi_request *);
+extern void scsi_wait_req(struct scsi_request *, const void *cmnd,
+			  void *buffer, unsigned bufflen,
+			  int timeout, int retries);
+extern void scsi_do_req(struct scsi_request *, const void *cmnd,
+			void *buffer, unsigned bufflen,
+			void (*done) (struct scsi_cmnd *),
+			int timeout, int retries);
+
+struct scsi_mode_data {
+	__u32	length;
+	__u16	block_descriptor_length;
+	__u8	medium_type;
+	__u8	device_specific;
+	__u8	header_length;
+	__u8	longlba:1;
+};
+
+extern int __scsi_mode_sense(struct scsi_request *SRpnt, int dbd,
+			     int modepage, unsigned char *buffer, int len,
+			     int timeout, int retries,
+			     struct scsi_mode_data *data);
+
+
+#endif /* _SCSI_SCSI_REQUEST_H */
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
new file mode 100644
index 000000000000..e47e36a4ef49
--- /dev/null
+++ b/include/scsi/scsi_tcq.h
@@ -0,0 +1,134 @@
+#ifndef _SCSI_SCSI_TCQ_H
+#define _SCSI_SCSI_TCQ_H
+
+#include <linux/blkdev.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+
+#define MSG_SIMPLE_TAG	0x20
+#define MSG_HEAD_TAG	0x21
+#define MSG_ORDERED_TAG	0x22
+
+#define SCSI_NO_TAG	(-1)    /* identify no tag in use */
+
+
+
+/**
+ * scsi_get_tag_type - get the type of tag the device supports
+ * @sdev:	the scsi device
+ *
+ * Notes:
+ *	If the drive only supports simple tags, returns MSG_SIMPLE_TAG
+ *	if it supports all tag types, returns MSG_ORDERED_TAG.
+ */
+static inline int scsi_get_tag_type(struct scsi_device *sdev)
+{
+	if (!sdev->tagged_supported)
+		return 0;
+	if (sdev->ordered_tags)
+		return MSG_ORDERED_TAG;
+	if (sdev->simple_tags)
+		return MSG_SIMPLE_TAG;
+	return 0;
+}
+
+static inline void scsi_set_tag_type(struct scsi_device *sdev, int tag)
+{
+	switch (tag) {
+	case MSG_ORDERED_TAG:
+		sdev->ordered_tags = 1;
+		/* fall through */
+	case MSG_SIMPLE_TAG:
+		sdev->simple_tags = 1;
+		break;
+	case 0:
+		/* fall through */
+	default:
+		sdev->ordered_tags = 0;
+		sdev->simple_tags = 0;
+		break;
+	}
+}
+/**
+ * scsi_activate_tcq - turn on tag command queueing
+ * @SDpnt:	device to turn on TCQ for
+ * @depth:	queue depth
+ *
+ * Notes:
+ *	Eventually, I hope depth would be the maximum depth
+ *	the device could cope with and the real queue depth
+ *	would be adjustable from 0 to depth.
+ **/
+static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
+{
+	if (!sdev->tagged_supported)
+		return;
+
+	if (!blk_queue_tagged(sdev->request_queue))
+		blk_queue_init_tags(sdev->request_queue, depth, NULL);
+
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+}
+
+/**
+ * scsi_deactivate_tcq - turn off tag command queueing
+ * @SDpnt:	device to turn off TCQ for
+ **/
+static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
+{
+	if (blk_queue_tagged(sdev->request_queue))
+		blk_queue_free_tags(sdev->request_queue);
+	scsi_adjust_queue_depth(sdev, 0, depth);
+}
+
+/**
+ * scsi_populate_tag_msg - place a tag message in a buffer
+ * @SCpnt:	pointer to the Scsi_Cmnd for the tag
+ * @msg:	pointer to the area to place the tag
+ *
+ * Notes:
+ *	designed to create the correct type of tag message for the 
+ *	particular request.  Returns the size of the tag message.
+ *	May return 0 if TCQ is disabled for this device.
+ **/
+static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg)
+{
+        struct request *req = cmd->request;
+	struct scsi_device *sdev = cmd->device;
+
+        if (blk_rq_tagged(req)) {
+		if (sdev->ordered_tags && req->flags & REQ_HARDBARRIER)
+        	        *msg++ = MSG_ORDERED_TAG;
+        	else
+        	        *msg++ = MSG_SIMPLE_TAG;
+        	*msg++ = req->tag;
+        	return 2;
+	}
+
+	return 0;
+}
+
+/**
+ * scsi_find_tag - find a tagged command by device
+ * @SDpnt:	pointer to the ScSI device
+ * @tag:	the tag number
+ *
+ * Notes:
+ *	Only works with tags allocated by the generic blk layer.
+ **/
+static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
+{
+
+        struct request *req;
+
+        if (tag != SCSI_NO_TAG) {
+        	req = blk_queue_find_tag(sdev->request_queue, tag);
+	        return req ? (struct scsi_cmnd *)req->special : NULL;
+	}
+
+	/* single command, look in space */
+	return sdev->current_cmnd;
+}
+
+#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
new file mode 100644
index 000000000000..2dcee7a84752
--- /dev/null
+++ b/include/scsi/scsi_transport.h
@@ -0,0 +1,48 @@
+/* 
+ *  Transport specific attributes.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_H
+#define SCSI_TRANSPORT_H
+
+#include <linux/transport_class.h>
+
+struct scsi_transport_template {
+	/* the attribute containers */
+	struct transport_container host_attrs;
+	struct transport_container target_attrs;
+	struct transport_container device_attrs;
+
+	/* The size of the specific transport attribute structure (a
+	 * space of this size will be left at the end of the
+	 * scsi_* structure */
+	int	device_size;
+	int	target_size;
+	int	host_size;
+
+	/*
+	 * True if the transport wants to use a host-based work-queue
+	 */
+	unsigned int create_work_queue : 1;
+};
+
+#define transport_class_to_shost(tc) \
+	dev_to_shost((tc)->dev)
+
+
+#endif /* SCSI_TRANSPORT_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
new file mode 100644
index 000000000000..70ad16315a16
--- /dev/null
+++ b/include/scsi/scsi_transport_fc.h
@@ -0,0 +1,442 @@
+/* 
+ *  FiberChannel transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  ========
+ *
+ *  Copyright (C) 2004-2005   James Smart, Emulex Corporation
+ *    Rewrite for host, target, device, and remote port attributes,
+ *    statistics, and service functions...
+ *
+ */
+#ifndef SCSI_TRANSPORT_FC_H
+#define SCSI_TRANSPORT_FC_H
+
+#include <linux/config.h>
+
+struct scsi_transport_template;
+
+
+/*
+ * FC Port definitions - Following FC HBAAPI guidelines
+ *
+ * Note: Not all binary values for the different fields match HBAAPI.
+ *  Instead, we use densely packed ordinal values or enums.
+ *  We get away with this as we never present the actual binary values
+ *  externally. For sysfs, we always present the string that describes
+ *  the value. Thus, an admin doesn't need a magic HBAAPI decoder ring
+ *  to understand the values. The HBAAPI user-space library is free to
+ *  convert the strings into the HBAAPI-specified binary values.
+ *
+ * Note: Not all HBAAPI-defined values are contained in the definitions
+ *  below. Those not appropriate to an fc_host (e.g. FCP initiator) have
+ *  been removed.
+ */
+
+/*
+ * fc_port_type: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_type {
+	FC_PORTTYPE_UNKNOWN,
+	FC_PORTTYPE_OTHER,
+	FC_PORTTYPE_NOTPRESENT,
+	FC_PORTTYPE_NPORT,		/* Attached to FPort */
+	FC_PORTTYPE_NLPORT,		/* (Public) Loop w/ FLPort */
+	FC_PORTTYPE_LPORT,		/* (Private) Loop w/o FLPort */
+	FC_PORTTYPE_PTP,		/* Point to Point w/ another NPort */
+};
+
+/*
+ * fc_port_state: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_state {
+	FC_PORTSTATE_UNKNOWN,
+	FC_PORTSTATE_NOTPRESENT,
+	FC_PORTSTATE_ONLINE,
+	FC_PORTSTATE_OFFLINE,		/* User has taken Port Offline */
+	FC_PORTSTATE_BLOCKED,
+	FC_PORTSTATE_BYPASSED,
+	FC_PORTSTATE_DIAGNOSTICS,
+	FC_PORTSTATE_LINKDOWN,
+	FC_PORTSTATE_ERROR,
+	FC_PORTSTATE_LOOPBACK,
+};
+
+
+/* 
+ * FC Classes of Service
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_classes). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_COS_UNSPECIFIED		0
+#define FC_COS_CLASS1			2
+#define FC_COS_CLASS2			4
+#define FC_COS_CLASS3			8
+#define FC_COS_CLASS4			0x10
+#define FC_COS_CLASS6			0x40
+
+/* 
+ * FC Port Speeds
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_speeds). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_PORTSPEED_UNKNOWN		0 /* Unknown - transceiver
+					     incapable of reporting */
+#define FC_PORTSPEED_1GBIT		1
+#define FC_PORTSPEED_2GBIT		2
+#define FC_PORTSPEED_10GBIT		4
+#define FC_PORTSPEED_4GBIT		8
+#define FC_PORTSPEED_NOT_NEGOTIATED	(1 << 15) /* Speed not established */
+
+/*
+ * fc_tgtid_binding_type: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_tgtid_binding_type  {
+	FC_TGTID_BIND_NONE,
+	FC_TGTID_BIND_BY_WWPN,
+	FC_TGTID_BIND_BY_WWNN,
+	FC_TGTID_BIND_BY_ID,
+};
+
+/*
+ * FC Remote Port Roles
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report roles). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_RPORT_ROLE_UNKNOWN			0x00
+#define FC_RPORT_ROLE_FCP_TARGET		0x01
+#define FC_RPORT_ROLE_FCP_INITIATOR		0x02
+#define FC_RPORT_ROLE_IP_PORT			0x04
+
+
+/*
+ * fc_rport_identifiers: This set of data contains all elements
+ * to uniquely identify a remote FC port. The driver uses this data
+ * to report the existence of a remote FC port in the topology. Internally,
+ * the transport uses this data for attributes and to manage consistent
+ * target id bindings.
+ */
+struct fc_rport_identifiers {
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+};
+
+/* Macro for use in defining Remote Port attributes */
+#define FC_RPORT_ATTR(_name,_mode,_show,_store)				\
+struct class_device_attribute class_device_attr_rport_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+
+/*
+ * FC Remote Port Attributes
+ *
+ * This structure exists for each remote FC port that a LLDD notifies
+ * the subsystem of.  A remote FC port may or may not be a SCSI Target,
+ * also be a SCSI initiator, IP endpoint, etc. As such, the remote
+ * port is considered a separate entity, independent of "role" (such
+ * as scsi target).
+ *
+ * --
+ *
+ * Attributes are based on HBAAPI V2.0 definitions. Only those
+ * attributes that are determinable by the local port (aka Host)
+ * are contained.
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling
+ * fc_remote_port_add(). The transport fully manages all get functions
+ * w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+struct fc_rport {	/* aka fc_starget_attrs */
+	/* Fixed Attributes */
+	u32 maxframe_size;
+	u32 supported_classes;
+
+	/* Dynamic Attributes */
+	u32 dev_loss_tmo;	/* Remote Port loss timeout in seconds. */
+
+	/* Private (Transport-managed) Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+	enum fc_port_state port_state;	/* Will only be ONLINE or UNKNOWN */
+	u32 scsi_target_id;
+
+	/* exported data */
+	void *dd_data;			/* Used for driver-specific storage */
+
+	/* internal data */
+	unsigned int channel;
+	u32 number;
+	struct list_head peers;
+	struct device dev;
+ 	struct work_struct dev_loss_work;
+ 	struct work_struct scan_work;
+} __attribute__((aligned(sizeof(unsigned long))));
+
+#define	dev_to_rport(d)				\
+	container_of(d, struct fc_rport, dev)
+#define transport_class_to_rport(classdev)	\
+	dev_to_rport(classdev->dev)
+#define rport_to_shost(r)			\
+	dev_to_shost(r->dev.parent)
+
+/*
+ * FC SCSI Target Attributes
+ *
+ * The SCSI Target is considered an extention of a remote port (as
+ * a remote port can be more than a SCSI Target). Within the scsi
+ * subsystem, we leave the Target as a separate entity. Doing so
+ * provides backward compatibility with prior FC transport api's,
+ * and lets remote ports be handled entirely within the FC transport
+ * and independently from the scsi subsystem. The drawback is that
+ * some data will be duplicated.
+ */
+
+struct fc_starget_attrs {	/* aka fc_target_attrs */
+	/* Dynamic Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+};
+
+#define fc_starget_node_name(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->node_name)
+#define fc_starget_port_name(x)	\
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_name)
+#define fc_starget_port_id(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_id)
+
+#define starget_to_rport(s)			\
+	scsi_is_fc_rport(s->dev.parent) ? dev_to_rport(s->dev.parent) : NULL
+
+
+/*
+ * FC Local Port (Host) Statistics
+ */
+
+/* FC Statistics - Following FC HBAAPI v2.0 guidelines */
+struct fc_host_statistics {
+	/* port statistics */
+	u64 seconds_since_last_reset;
+	u64 tx_frames;
+	u64 tx_words;
+	u64 rx_frames;
+	u64 rx_words;
+	u64 lip_count;
+	u64 nos_count;
+	u64 error_frames;
+	u64 dumped_frames;
+	u64 link_failure_count;
+	u64 loss_of_sync_count;
+	u64 loss_of_signal_count;
+	u64 prim_seq_protocol_err_count;
+	u64 invalid_tx_word_count;
+	u64 invalid_crc_count;
+	
+	/* fc4 statistics  (only FCP supported currently) */
+	u64 fcp_input_requests;
+	u64 fcp_output_requests;
+	u64 fcp_control_requests;
+	u64 fcp_input_megabytes;
+	u64 fcp_output_megabytes;
+};
+
+
+/*
+ * FC Local Port (Host) Attributes
+ *
+ * Attributes are based on HBAAPI V2.0 definitions.
+ * Note: OSDeviceName is determined by user-space library
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling scsi_add_host().
+ * The transport fully manages all get functions w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+#define FC_FC4_LIST_SIZE		32
+#define FC_SYMBOLIC_NAME_SIZE		256
+#define FC_VERSION_STRING_SIZE		64
+#define FC_SERIAL_NUMBER_SIZE		80
+
+struct fc_host_attrs {
+	/* Fixed Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 supported_classes;
+	u8  supported_fc4s[FC_FC4_LIST_SIZE];
+	char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+	u32 supported_speeds;
+	u32 maxframe_size;
+	char serial_number[FC_SERIAL_NUMBER_SIZE];
+
+	/* Dynamic Attributes */
+	u32 port_id;
+	enum fc_port_type port_type;
+	enum fc_port_state port_state;
+	u8  active_fc4s[FC_FC4_LIST_SIZE];
+	u32 speed;
+	u64 fabric_name;
+
+	/* Private (Transport-managed) Attributes */
+	enum fc_tgtid_binding_type  tgtid_bind_type;
+
+	/* internal data */
+	struct list_head rports;
+	struct list_head rport_bindings;
+	u32 next_rport_number;
+	u32 next_target_id;
+};
+
+#define fc_host_node_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->node_name)
+#define fc_host_port_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_name)
+#define fc_host_supported_classes(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
+#define fc_host_supported_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
+#define fc_host_symbolic_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_supported_speeds(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
+#define fc_host_maxframe_size(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->maxframe_size)
+#define fc_host_serial_number(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->serial_number)
+#define fc_host_port_id(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_id)
+#define fc_host_port_type(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_type)
+#define fc_host_port_state(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_state)
+#define fc_host_active_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->active_fc4s)
+#define fc_host_speed(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->speed)
+#define fc_host_fabric_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_tgtid_bind_type(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
+#define fc_host_rports(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rports)
+#define fc_host_rport_bindings(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rport_bindings)
+#define fc_host_next_rport_number(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_rport_number)
+#define fc_host_next_target_id(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_target_id)
+
+
+/* The functions by which the transport class and the driver communicate */
+struct fc_function_template {
+	void    (*get_rport_dev_loss_tmo)(struct fc_rport *);
+	void	(*set_rport_dev_loss_tmo)(struct fc_rport *, u32);
+
+	void	(*get_starget_node_name)(struct scsi_target *);
+	void	(*get_starget_port_name)(struct scsi_target *);
+	void 	(*get_starget_port_id)(struct scsi_target *);
+
+	void 	(*get_host_port_id)(struct Scsi_Host *);
+	void	(*get_host_port_type)(struct Scsi_Host *);
+	void	(*get_host_port_state)(struct Scsi_Host *);
+	void	(*get_host_active_fc4s)(struct Scsi_Host *);
+	void	(*get_host_speed)(struct Scsi_Host *);
+	void	(*get_host_fabric_name)(struct Scsi_Host *);
+
+	struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
+	void	(*reset_fc_host_stats)(struct Scsi_Host *);
+
+	/* allocation lengths for host-specific data */
+	u32	 			dd_fcrport_size;
+
+	/* 
+	 * The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class 
+	 */
+
+	/* remote port fixed attributes */
+	unsigned long	show_rport_maxframe_size:1;
+	unsigned long	show_rport_supported_classes:1;
+	unsigned long   show_rport_dev_loss_tmo:1;
+
+	/*
+	 * target dynamic attributes
+	 * These should all be "1" if the driver uses the remote port
+	 * add/delete functions (so attributes reflect rport values).
+	 */
+	unsigned long	show_starget_node_name:1;
+	unsigned long	show_starget_port_name:1;
+	unsigned long	show_starget_port_id:1;
+
+	/* host fixed attributes */
+	unsigned long	show_host_node_name:1;
+	unsigned long	show_host_port_name:1;
+	unsigned long	show_host_supported_classes:1;
+	unsigned long	show_host_supported_fc4s:1;
+	unsigned long	show_host_symbolic_name:1;
+	unsigned long	show_host_supported_speeds:1;
+	unsigned long	show_host_maxframe_size:1;
+	unsigned long	show_host_serial_number:1;
+	/* host dynamic attributes */
+	unsigned long	show_host_port_id:1;
+	unsigned long	show_host_port_type:1;
+	unsigned long	show_host_port_state:1;
+	unsigned long	show_host_active_fc4s:1;
+	unsigned long	show_host_speed:1;
+	unsigned long	show_host_fabric_name:1;
+};
+
+
+struct scsi_transport_template *fc_attach_transport(
+			struct fc_function_template *);
+void fc_release_transport(struct scsi_transport_template *);
+void fc_remove_host(struct Scsi_Host *);
+struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
+			int channel, struct fc_rport_identifiers  *ids);
+void fc_remote_port_delete(struct fc_rport  *rport);
+void fc_remote_port_rolechg(struct fc_rport  *rport, u32 roles);
+int fc_remote_port_block(struct fc_rport *rport);
+void fc_remote_port_unblock(struct fc_rport *rport);
+int scsi_is_fc_rport(const struct device *);
+
+#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
new file mode 100644
index 000000000000..1b26a6c0aa2a
--- /dev/null
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -0,0 +1,178 @@
+/* 
+ * iSCSI transport class definitions
+ *
+ * Copyright (C) IBM Corporation, 2004
+ * Copyright (C) Mike Christie, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef SCSI_TRANSPORT_ISCSI_H
+#define SCSI_TRANSPORT_ISCSI_H
+
+#include <linux/config.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+
+struct scsi_transport_template;
+
+struct iscsi_class_session {
+	uint8_t isid[6];
+	uint16_t tsih;
+	int header_digest;		/* 1 CRC32, 0 None */
+	int data_digest;		/* 1 CRC32, 0 None */
+	uint16_t tpgt;
+	union {
+		struct in6_addr sin6_addr;
+		struct in_addr sin_addr;
+	} u;
+	sa_family_t addr_type;		/* must be AF_INET or AF_INET6 */
+	uint16_t port;			/* must be in network byte order */
+	int initial_r2t;		/* 1 Yes, 0 No */
+	int immediate_data;		/* 1 Yes, 0 No */
+	uint32_t max_recv_data_segment_len;
+	uint32_t max_burst_len;
+	uint32_t first_burst_len;
+	uint16_t def_time2wait;
+	uint16_t def_time2retain;
+	uint16_t max_outstanding_r2t;
+	int data_pdu_in_order;		/* 1 Yes, 0 No */
+	int data_sequence_in_order;	/* 1 Yes, 0 No */
+	int erl;
+};
+
+/*
+ * accessor macros
+ */
+#define iscsi_isid(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->isid)
+#define iscsi_tsih(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->tsih)
+#define iscsi_header_digest(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->header_digest)
+#define iscsi_data_digest(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->data_digest)
+#define iscsi_port(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->port)
+#define iscsi_addr_type(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->addr_type)
+#define iscsi_sin_addr(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->u.sin_addr)
+#define iscsi_sin6_addr(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->u.sin6_addr)
+#define iscsi_tpgt(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->tpgt)
+#define iscsi_initial_r2t(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->initial_r2t)
+#define iscsi_immediate_data(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->immediate_data)
+#define iscsi_max_recv_data_segment_len(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->max_recv_data_segment_len)
+#define iscsi_max_burst_len(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->max_burst_len)
+#define iscsi_first_burst_len(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->first_burst_len)
+#define iscsi_def_time2wait(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->def_time2wait)
+#define iscsi_def_time2retain(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->def_time2retain)
+#define iscsi_max_outstanding_r2t(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->max_outstanding_r2t)
+#define iscsi_data_pdu_in_order(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->data_pdu_in_order)
+#define iscsi_data_sequence_in_order(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->data_sequence_in_order)
+#define iscsi_erl(x) \
+	(((struct iscsi_class_session *)&(x)->starget_data)->erl)
+
+/*
+ * The functions by which the transport class and the driver communicate
+ */
+struct iscsi_function_template {
+	/*
+	 * target attrs
+	 */
+	void (*get_isid)(struct scsi_target *);
+	void (*get_tsih)(struct scsi_target *);
+	void (*get_header_digest)(struct scsi_target *);
+	void (*get_data_digest)(struct scsi_target *);
+	void (*get_port)(struct scsi_target *);
+	void (*get_tpgt)(struct scsi_target *);
+	/*
+	 * In get_ip_address the lld must set the address and
+	 * the address type
+	 */
+	void (*get_ip_address)(struct scsi_target *);
+	/*
+	 * The lld should snprintf the name or alias to the buffer
+	 */
+	ssize_t (*get_target_name)(struct scsi_target *, char *, ssize_t);
+	ssize_t (*get_target_alias)(struct scsi_target *, char *, ssize_t);
+	void (*get_initial_r2t)(struct scsi_target *);
+	void (*get_immediate_data)(struct scsi_target *);
+	void (*get_max_recv_data_segment_len)(struct scsi_target *);
+	void (*get_max_burst_len)(struct scsi_target *);
+	void (*get_first_burst_len)(struct scsi_target *);
+	void (*get_def_time2wait)(struct scsi_target *);
+	void (*get_def_time2retain)(struct scsi_target *);
+	void (*get_max_outstanding_r2t)(struct scsi_target *);
+	void (*get_data_pdu_in_order)(struct scsi_target *);
+	void (*get_data_sequence_in_order)(struct scsi_target *);
+	void (*get_erl)(struct scsi_target *);
+
+	/*
+	 * host atts
+	 */
+
+	/*
+	 * The lld should snprintf the name or alias to the buffer
+	 */
+	ssize_t (*get_initiator_alias)(struct Scsi_Host *, char *, ssize_t);
+	ssize_t (*get_initiator_name)(struct Scsi_Host *, char *, ssize_t);
+	/*
+	 * The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class. We could probably just test if a get_ fn was set
+	 * since we only use the values for sysfs but this is how
+	 * fc does it too.
+	 */
+	unsigned long show_isid:1;
+	unsigned long show_tsih:1;
+	unsigned long show_header_digest:1;
+	unsigned long show_data_digest:1;
+	unsigned long show_port:1;
+	unsigned long show_tpgt:1;
+	unsigned long show_ip_address:1;
+	unsigned long show_target_name:1;
+	unsigned long show_target_alias:1;
+	unsigned long show_initial_r2t:1;
+	unsigned long show_immediate_data:1;
+	unsigned long show_max_recv_data_segment_len:1;
+	unsigned long show_max_burst_len:1;
+	unsigned long show_first_burst_len:1;
+	unsigned long show_def_time2wait:1;
+	unsigned long show_def_time2retain:1;
+	unsigned long show_max_outstanding_r2t:1;
+	unsigned long show_data_pdu_in_order:1;
+	unsigned long show_data_sequence_in_order:1;
+	unsigned long show_erl:1;
+	unsigned long show_initiator_name:1;
+	unsigned long show_initiator_alias:1;
+};
+
+struct scsi_transport_template *iscsi_attach_transport(struct iscsi_function_template *);
+void iscsi_release_transport(struct scsi_transport_template *);
+
+#endif
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
new file mode 100644
index 000000000000..6dcf497bf46d
--- /dev/null
+++ b/include/scsi/scsi_transport_spi.h
@@ -0,0 +1,135 @@
+/* 
+ *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_SPI_H
+#define SCSI_TRANSPORT_SPI_H
+
+#include <linux/config.h>
+#include <linux/transport_class.h>
+
+struct scsi_transport_template;
+
+struct spi_transport_attrs {
+	int period;		/* value in the PPR/SDTR command */
+	int offset;
+	unsigned int width:1;	/* 0 - narrow, 1 - wide */
+	unsigned int iu:1;	/* Information Units enabled */
+	unsigned int dt:1;	/* DT clocking enabled */
+	unsigned int qas:1;	/* Quick Arbitration and Selection enabled */
+	unsigned int wr_flow:1;	/* Write Flow control enabled */
+	unsigned int rd_strm:1;	/* Read streaming enabled */
+	unsigned int rti:1;	/* Retain Training Information */
+	unsigned int pcomp_en:1;/* Precompensation enabled */
+	unsigned int initial_dv:1; /* DV done to this target yet  */
+	unsigned long flags;	/* flags field for drivers to use */
+	/* Device Properties fields */
+	unsigned int support_sync:1; /* synchronous support */
+	unsigned int support_wide:1; /* wide support */
+	unsigned int support_dt:1; /* allows DT phases */
+	unsigned int support_dt_only; /* disallows ST phases */
+	unsigned int support_ius; /* support Information Units */
+	unsigned int support_qas; /* supports quick arbitration and selection */
+	/* Private Fields */
+	unsigned int dv_pending:1; /* Internal flag */
+	struct semaphore dv_sem; /* semaphore to serialise dv */
+};
+
+enum spi_signal_type {
+	SPI_SIGNAL_UNKNOWN = 1,
+	SPI_SIGNAL_SE,
+	SPI_SIGNAL_LVD,
+	SPI_SIGNAL_HVD,
+};
+
+struct spi_host_attrs {
+	enum spi_signal_type signalling;
+};
+
+/* accessor functions */
+#define spi_period(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->period)
+#define spi_offset(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->offset)
+#define spi_width(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->width)
+#define spi_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->iu)
+#define spi_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->dt)
+#define spi_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->qas)
+#define spi_wr_flow(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
+#define spi_rd_strm(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
+#define spi_rti(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rti)
+#define spi_pcomp_en(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
+#define spi_initial_dv(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
+
+#define spi_support_sync(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
+#define spi_support_wide(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)
+#define spi_support_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt)
+#define spi_support_dt_only(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt_only)
+#define spi_support_ius(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_ius)
+#define spi_support_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_qas)
+
+#define spi_flags(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->flags)
+#define spi_signalling(h)	(((struct spi_host_attrs *)(h)->shost_data)->signalling)
+
+
+
+/* The functions by which the transport class and the driver communicate */
+struct spi_function_template {
+	void	(*get_period)(struct scsi_target *);
+	void	(*set_period)(struct scsi_target *, int);
+	void	(*get_offset)(struct scsi_target *);
+	void	(*set_offset)(struct scsi_target *, int);
+	void	(*get_width)(struct scsi_target *);
+	void	(*set_width)(struct scsi_target *, int);
+	void	(*get_iu)(struct scsi_target *);
+	void	(*set_iu)(struct scsi_target *, int);
+	void	(*get_dt)(struct scsi_target *);
+	void	(*set_dt)(struct scsi_target *, int);
+	void	(*get_qas)(struct scsi_target *);
+	void	(*set_qas)(struct scsi_target *, int);
+	void	(*get_wr_flow)(struct scsi_target *);
+	void	(*set_wr_flow)(struct scsi_target *, int);
+	void	(*get_rd_strm)(struct scsi_target *);
+	void	(*set_rd_strm)(struct scsi_target *, int);
+	void	(*get_rti)(struct scsi_target *);
+	void	(*set_rti)(struct scsi_target *, int);
+	void	(*get_pcomp_en)(struct scsi_target *);
+	void	(*set_pcomp_en)(struct scsi_target *, int);
+	void	(*get_signalling)(struct Scsi_Host *);
+	void	(*set_signalling)(struct Scsi_Host *, enum spi_signal_type);
+	/* The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class */
+	unsigned long	show_period:1;
+	unsigned long	show_offset:1;
+	unsigned long	show_width:1;
+	unsigned long	show_iu:1;
+	unsigned long	show_dt:1;
+	unsigned long	show_qas:1;
+	unsigned long	show_wr_flow:1;
+	unsigned long	show_rd_strm:1;
+	unsigned long	show_rti:1;
+	unsigned long	show_pcomp_en:1;
+};
+
+struct scsi_transport_template *spi_attach_transport(struct spi_function_template *);
+void spi_release_transport(struct scsi_transport_template *);
+void spi_schedule_dv_device(struct scsi_device *);
+void spi_dv_device(struct scsi_device *);
+void spi_display_xfer_agreement(struct scsi_target *);
+
+#endif /* SCSI_TRANSPORT_SPI_H */
diff --git a/include/scsi/scsicam.h b/include/scsi/scsicam.h
new file mode 100644
index 000000000000..24ede474752e
--- /dev/null
+++ b/include/scsi/scsicam.h
@@ -0,0 +1,19 @@
+/*
+ * scsicam.h - SCSI CAM support functions, use for HDIO_GETGEO, etc.
+ *
+ * Copyright 1993, 1994 Drew Eckhardt
+ *      Visionary Computing 
+ *      (Unix and Linux consulting and custom programming)
+ *      drew@Colorado.EDU
+ *	+1 (303) 786-7975
+ *
+ * For more information, please consult the SCSI-CAM draft.
+ */
+
+#ifndef SCSICAM_H
+#define SCSICAM_H
+extern int scsicam_bios_param (struct block_device *bdev, sector_t capacity, int *ip);
+extern int scsi_partsize(unsigned char *buf, unsigned long capacity,
+           unsigned int  *cyls, unsigned int *hds, unsigned int *secs);
+extern unsigned char *scsi_bios_ptable(struct block_device *bdev);
+#endif /* def SCSICAM_H */
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
new file mode 100644
index 000000000000..0a487fe26d4f
--- /dev/null
+++ b/include/scsi/sg.h
@@ -0,0 +1,326 @@
+#ifndef _SCSI_GENERIC_H
+#define _SCSI_GENERIC_H
+
+#include <linux/compiler.h>
+
+/*
+   History:
+    Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
+     process control of SCSI devices.
+    Development Sponsored by Killy Corp. NY NY
+Original driver (sg.h):
+*       Copyright (C) 1992 Lawrence Foard
+Version 2 and 3 extensions to driver:
+*       Copyright (C) 1998 - 2003 Douglas Gilbert
+
+    Version: 3.5.29 (20030529)
+    This version is for 2.5 series kernels.
+
+    Changes since 3.5.28 (20030308)
+	- fix bug introduced in version 3.1.24 (last segment of sgat list)
+    Changes since 3.5.27 (20020812)
+    	- remove procfs entries: hosts, host_hdr + host_strs (now in sysfs)
+	- add sysfs sg driver params: def_reserved_size, allow_dio, version
+	- new boot option: "sg_allow_dio" and module parameter: "allow_dio"
+        - multiple internal changes due to scsi subsystem rework	
+    Changes since 3.5.26 (20020708)
+	- re-add direct IO using Kai Makisara's work
+	- re-tab to 8, start using C99-isms
+	- simplify memory management
+    Changes since 3.5.25 (20020504)
+	- driverfs additions
+	- copy_to/from_user() fixes [William Stinson]
+	- disable kiobufs support
+
+    For a full changelog see http://www.torque.net/sg
+
+Map of SG verions to the Linux kernels in which they appear:
+       ----------        ----------------------------------
+       original          all kernels < 2.2.6
+       2.1.40            2.2.20
+       3.0.x             optional version 3 sg driver for 2.2 series
+       3.1.17++          2.4.0++
+       3.5.23++          2.5.0++
+
+Major new features in SG 3.x driver (cf SG 2.x drivers)
+	- SG_IO ioctl() combines function if write() and read()
+	- new interface (sg_io_hdr_t) but still supports old interface
+	- scatter/gather in user space, direct IO, and mmap supported
+
+ The normal action of this driver is to use the adapter (HBA) driver to DMA
+ data into kernel buffers and then use the CPU to copy the data into the 
+ user space (vice versa for writes). That is called "indirect" IO due to 
+ the double handling of data. There are two methods offered to remove the
+ redundant copy: 1) direct IO which uses the kernel kiobuf mechanism and 
+ 2) using the mmap() system call to map the reserve buffer (this driver has 
+ one reserve buffer per fd) into the user space. Both have their advantages.
+ In terms of absolute speed mmap() is faster. If speed is not a concern, 
+ indirect IO should be fine. Read the documentation for more information.
+
+ ** N.B. To use direct IO 'echo 1 > /proc/scsi/sg/allow_dio' may be
+         needed. That pseudo file's content is defaulted to 0. **
+ 
+ Historical note: this SCSI pass-through driver has been known as "sg" for 
+ a decade. In broader kernel discussions "sg" is used to refer to scatter
+ gather techniques. The context should clarify which "sg" is referred to.
+
+ Documentation
+ =============
+ A web site for the SG device driver can be found at:
+	http://www.torque.net/sg  [alternatively check the MAINTAINERS file]
+ The documentation for the sg version 3 driver can be found at:
+ 	http://www.torque.net/sg/p/sg_v3_ho.html
+ This is a rendering from DocBook source [change the extension to "sgml"
+ or "xml"]. There are renderings in "ps", "pdf", "rtf" and "txt" (soon).
+
+ The older, version 2 documents discuss the original sg interface in detail:
+	http://www.torque.net/sg/p/scsi-generic.txt
+	http://www.torque.net/sg/p/scsi-generic_long.txt
+ A version of this document (potentially out of date) may also be found in
+ the kernel source tree, probably at:
+        Documentation/scsi/scsi-generic.txt .
+
+ Utility and test programs are available at the sg web site. They are 
+ bundled as sg_utils (for the lk 2.2 series) and sg3_utils (for the
+ lk 2.4 series).
+
+ There is a HOWTO on the Linux SCSI subsystem in the lk 2.4 series at:
+ 	http://www.linuxdoc.org/HOWTO/SCSI-2.4-HOWTO
+*/
+
+
+/* New interface introduced in the 3.x SG drivers follows */
+
+typedef struct sg_iovec /* same structure as used by readv() Linux system */
+{                       /* call. It defines one scatter-gather element. */
+    void __user *iov_base;      /* Starting address  */
+    size_t iov_len;             /* Length in bytes  */
+} sg_iovec_t;
+
+
+typedef struct sg_io_hdr
+{
+    int interface_id;           /* [i] 'S' for SCSI generic (required) */
+    int dxfer_direction;        /* [i] data transfer direction  */
+    unsigned char cmd_len;      /* [i] SCSI command length ( <= 16 bytes) */
+    unsigned char mx_sb_len;    /* [i] max length to write to sbp */
+    unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+    unsigned int dxfer_len;     /* [i] byte count of data transfer */
+    void __user *dxferp;	/* [i], [*io] points to data transfer memory
+					      or scatter gather list */
+    unsigned char __user *cmdp; /* [i], [*i] points to command to perform */
+    void __user *sbp;		/* [i], [*o] points to sense_buffer memory */
+    unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
+    unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
+    int pack_id;                /* [i->o] unused internally (normally) */
+    void __user * usr_ptr;      /* [i->o] unused internally */
+    unsigned char status;       /* [o] scsi status */
+    unsigned char masked_status;/* [o] shifted, masked scsi status */
+    unsigned char msg_status;   /* [o] messaging level data (optional) */
+    unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
+    unsigned short host_status; /* [o] errors from host adapter */
+    unsigned short driver_status;/* [o] errors from software driver */
+    int resid;                  /* [o] dxfer_len - actual_transferred */
+    unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
+    unsigned int info;          /* [o] auxiliary information */
+} sg_io_hdr_t;  /* 64 bytes long (on i386) */
+
+#define SG_INTERFACE_ID_ORIG 'S'
+
+/* Use negative values to flag difference from original sg_header structure */
+#define SG_DXFER_NONE (-1)      /* e.g. a SCSI Test Unit Ready command */
+#define SG_DXFER_TO_DEV (-2)    /* e.g. a SCSI WRITE command */
+#define SG_DXFER_FROM_DEV (-3)  /* e.g. a SCSI READ command */
+#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the
+				   additional property than during indirect
+				   IO the user buffer is copied into the
+				   kernel buffers before the transfer */
+#define SG_DXFER_UNKNOWN (-5)   /* Unknown data direction */
+
+/* following flag values can be "or"-ed together */
+#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
+#define SG_FLAG_UNUSED_LUN_INHIBIT 2   /* default is overwrite lun in SCSI */
+				/* command block (when <= SCSI_2) */
+#define SG_FLAG_MMAP_IO 4       /* request memory mapped IO */
+#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
+				/* user space (debug indirect IO) */
+
+/* following 'info' values are "or"-ed together */
+#define SG_INFO_OK_MASK 0x1
+#define SG_INFO_OK 0x0          /* no sense, host nor driver "noise" */
+#define SG_INFO_CHECK 0x1       /* something abnormal happened */
+
+#define SG_INFO_DIRECT_IO_MASK 0x6
+#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
+#define SG_INFO_DIRECT_IO 0x2   /* direct IO requested and performed */
+#define SG_INFO_MIXED_IO 0x4    /* part direct, part indirect IO */
+
+
+typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
+    int host_no;        /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
+    int channel;
+    int scsi_id;        /* scsi id of target device */
+    int lun;
+    int scsi_type;      /* TYPE_... defined in scsi/scsi.h */
+    short h_cmd_per_lun;/* host (adapter) maximum commands per lun */
+    short d_queue_depth;/* device (or adapter) maximum queue length */
+    int unused[2];      /* probably find a good use, set 0 for now */
+} sg_scsi_id_t; /* 32 bytes long on i386 */
+
+typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
+    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
+    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
+    char problem;       /* 0 -> no problem detected, 1 -> error to report */
+    int pack_id;        /* pack_id associated with request */
+    void __user *usr_ptr;     /* user provided pointer (in new interface) */
+    unsigned int duration; /* millisecs elapsed since written (req_state==1)
+			      or request duration (req_state==2) */
+    int unused;
+} sg_req_info_t; /* 20 bytes long on i386 */
+
+
+/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
+ [Those that only apply to the SG 2.x drivers are at the end of the file.]
+ (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
+
+#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
+
+/* Used to configure SCSI command transformation layer for ATAPI devices */
+/* Only supported by the ide-scsi driver */
+#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
+		      /* 3rd arg = 0 to disable transform, 1 to enable it */
+#define SG_GET_TRANSFORM 0x2205
+
+#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
+#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
+
+/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
+#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
+/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
+
+/* Override host setting and always DMA using low memory ( <16MB on i386) */
+#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
+#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
+
+/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
+   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
+   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
+   then pack_id ignored by read() and oldest readable fetched. */
+#define SG_SET_FORCE_PACK_ID 0x227b
+#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
+
+#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
+
+/* Yields max scatter gather tablesize allowed by current host adapter */
+#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
+
+#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
+
+/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
+#define SG_SCSI_RESET 0x2284
+/* Associated values that can be given to SG_SCSI_RESET follow */
+#define		SG_SCSI_RESET_NOTHING	0
+#define		SG_SCSI_RESET_DEVICE	1
+#define		SG_SCSI_RESET_BUS	2
+#define		SG_SCSI_RESET_HOST	3
+
+/* synchronous SCSI command ioctl, (only in version 3 interface) */
+#define SG_IO 0x2285   /* similar effect as write() followed by read() */
+
+#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
+
+/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
+#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
+#define SG_GET_KEEP_ORPHAN 0x2288
+
+/* yields scsi midlevel's access_count for this SCSI device */
+#define SG_GET_ACCESS_COUNT 0x2289  
+
+
+#define SG_SCATTER_SZ (8 * 4096)  /* PAGE_SIZE not available to user */
+/* Largest size (in bytes) a single scatter-gather list element can have.
+   The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on
+   i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported
+   by adapter then this value is the largest data block that can be
+   read/written by a single scsi command. The user can find the value of
+   PAGE_SIZE by calling getpagesize() defined in unistd.h . */
+
+#define SG_DEFAULT_RETRIES 0
+
+/* Defaults, commented if they differ from original sg driver */
+#define SG_DEF_FORCE_LOW_DMA 0  /* was 1 -> memory below 16MB on i386 */
+#define SG_DEF_FORCE_PACK_ID 0
+#define SG_DEF_KEEP_ORPHAN 0
+#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
+
+/* maximum outstanding requests, write() yields EDOM if exceeded */
+#define SG_MAX_QUEUE 16
+
+#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
+
+/* Alternate style type names, "..._t" variants preferred */
+typedef struct sg_io_hdr Sg_io_hdr;
+typedef struct sg_io_vec Sg_io_vec;
+typedef struct sg_scsi_id Sg_scsi_id;
+typedef struct sg_req_info Sg_req_info;
+
+
+/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
+/*   The older SG interface based on the 'sg_header' structure follows.   */
+/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
+
+#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
+
+struct sg_header
+{
+    int pack_len;    /* [o] reply_len (ie useless), ignored as input */
+    int reply_len;   /* [i] max length of expected reply (inc. sg_header) */
+    int pack_id;     /* [io] id number of packet (use ints >= 0) */
+    int result;      /* [o] 0==ok, else (+ve) Unix errno (best ignored) */
+    unsigned int twelve_byte:1;
+	/* [i] Force 12 byte command length for group 6 & 7 commands  */
+    unsigned int target_status:5;   /* [o] scsi status from target */
+    unsigned int host_status:8;     /* [o] host status (see "DID" codes) */
+    unsigned int driver_status:8;   /* [o] driver status+suggestion */
+    unsigned int other_flags:10;    /* unused */
+    unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases:
+	   when target_status is CHECK_CONDITION or
+	   when target_status is COMMAND_TERMINATED or
+	   when (driver_status & DRIVER_SENSE) is true. */
+};      /* This structure is 36 bytes long on i386 */
+
+
+/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
+	   interface is used. They are kept for backward compatibility with
+	   the original and version 2 drivers. */
+
+#define SG_SET_TIMEOUT 0x2201  /* unit: jiffies (10ms on i386) */
+#define SG_GET_TIMEOUT 0x2202  /* yield timeout as _return_ value */
+
+/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q.
+   Each time a sg_io_hdr_t object is seen on this file descriptor, this
+   command queuing flag is set on (overriding the previous setting). */
+#define SG_GET_COMMAND_Q 0x2270   /* Yields 0 (queuing off) or 1 (on) */
+#define SG_SET_COMMAND_Q 0x2271   /* Change queuing state with 0 or 1 */
+
+/* Turn on/off error sense trace (1 and 0 respectively, default is off).
+   Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */
+#define SG_SET_DEBUG 0x227e    /* 0 -> turn off debug */
+
+#define SG_NEXT_CMD_LEN 0x2283  /* override SCSI command length with given
+		   number on the next write() on this file descriptor */
+
+
+/* Defaults, commented if they differ from original sg driver */
+#ifdef __KERNEL__
+#define SG_DEFAULT_TIMEOUT_USER	(60*USER_HZ) /* HZ == 'jiffies in 1 second' */
+#else
+#define SG_DEFAULT_TIMEOUT	(60*HZ)	     /* HZ == 'jiffies in 1 second' */
+#endif
+
+#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
+				  the new interface is used */
+#define SG_DEF_UNDERRUN_FLAG 0
+
+#endif
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
new file mode 100644
index 000000000000..2433e279e071
--- /dev/null
+++ b/include/sound/ac97_codec.h
@@ -0,0 +1,598 @@
+#ifndef __SOUND_AC97_CODEC_H
+#define __SOUND_AC97_CODEC_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *  Universal interface for Audio Codec '97
+ *
+ *  For more details look to AC '97 component specification revision 2.1
+ *  by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include "pcm.h"
+#include "control.h"
+#include "info.h"
+
+/*
+ *  AC'97 codec registers
+ */
+
+#define AC97_RESET		0x00	/* Reset */
+#define AC97_MASTER		0x02	/* Master Volume */
+#define AC97_HEADPHONE		0x04	/* Headphone Volume (optional) */
+#define AC97_MASTER_MONO	0x06	/* Master Volume Mono (optional) */
+#define AC97_MASTER_TONE	0x08	/* Master Tone (Bass & Treble) (optional) */
+#define AC97_PC_BEEP		0x0a	/* PC Beep Volume (optinal) */
+#define AC97_PHONE		0x0c	/* Phone Volume (optional) */
+#define AC97_MIC		0x0e	/* MIC Volume */
+#define AC97_LINE		0x10	/* Line In Volume */
+#define AC97_CD			0x12	/* CD Volume */
+#define AC97_VIDEO		0x14	/* Video Volume (optional) */
+#define AC97_AUX		0x16	/* AUX Volume (optional) */
+#define AC97_PCM		0x18	/* PCM Volume */
+#define AC97_REC_SEL		0x1a	/* Record Select */
+#define AC97_REC_GAIN		0x1c	/* Record Gain */
+#define AC97_REC_GAIN_MIC	0x1e	/* Record Gain MIC (optional) */
+#define AC97_GENERAL_PURPOSE	0x20	/* General Purpose (optional) */
+#define AC97_3D_CONTROL		0x22	/* 3D Control (optional) */
+#define AC97_INT_PAGING		0x24	/* Audio Interrupt & Paging (AC'97 2.3) */
+#define AC97_POWERDOWN		0x26	/* Powerdown control / status */
+/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
+#define AC97_EXTENDED_ID	0x28	/* Extended Audio ID */
+#define AC97_EXTENDED_STATUS	0x2a	/* Extended Audio Status and Control */
+#define AC97_PCM_FRONT_DAC_RATE 0x2c	/* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE	0x2e	/* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE	0x30	/* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE	0x32	/* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE	0x34	/* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER	0x36	/* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER	0x38	/* Surround (Rear) Master Volume */
+#define AC97_SPDIF		0x3a	/* S/PDIF control */
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MID	0x3c	/* Extended Modem ID */
+#define AC97_EXTENDED_MSTATUS	0x3e	/* Extended Modem Status and Control */
+#define AC97_LINE1_RATE		0x40	/* Line1 DAC/ADC Rate */
+#define AC97_LINE2_RATE		0x42	/* Line2 DAC/ADC Rate */
+#define AC97_HANDSET_RATE	0x44	/* Handset DAC/ADC Rate */
+#define AC97_LINE1_LEVEL	0x46	/* Line1 DAC/ADC Level */
+#define AC97_LINE2_LEVEL	0x48	/* Line2 DAC/ADC Level */
+#define AC97_HANDSET_LEVEL	0x4a	/* Handset DAC/ADC Level */
+#define AC97_GPIO_CFG		0x4c	/* GPIO Configuration */
+#define AC97_GPIO_POLARITY	0x4e	/* GPIO Pin Polarity/Type, 0=low, 1=high active */
+#define AC97_GPIO_STICKY	0x50	/* GPIO Pin Sticky, 0=not, 1=sticky */
+#define AC97_GPIO_WAKEUP	0x52	/* GPIO Pin Wakeup, 0=no int, 1=yes int */
+#define AC97_GPIO_STATUS	0x54	/* GPIO Pin Status, slot 12 */
+#define AC97_MISC_AFE		0x56	/* Miscellaneous Modem AFE Status and Control */
+/* range 0x5a-0x7b - Vendor Specific */
+#define AC97_VENDOR_ID1		0x7c	/* Vendor ID1 */
+#define AC97_VENDOR_ID2		0x7e	/* Vendor ID2 / revision */
+/* range 0x60-0x6f (page 1) - extended codec registers */
+#define AC97_CODEC_CLASS_REV	0x60	/* Codec Class/Revision */
+#define AC97_PCI_SVID		0x62	/* PCI Subsystem Vendor ID */
+#define AC97_PCI_SID		0x64	/* PCI Subsystem ID */
+#define AC97_FUNC_SELECT	0x66	/* Function Select */
+#define AC97_FUNC_INFO		0x68	/* Function Information */
+#define AC97_SENSE_INFO		0x6a	/* Sense Details */
+
+/* slot allocation */
+#define AC97_SLOT_TAG		0
+#define AC97_SLOT_CMD_ADDR	1
+#define AC97_SLOT_CMD_DATA	2
+#define AC97_SLOT_PCM_LEFT	3
+#define AC97_SLOT_PCM_RIGHT	4
+#define AC97_SLOT_MODEM_LINE1	5
+#define AC97_SLOT_PCM_CENTER	6
+#define AC97_SLOT_MIC		6	/* input */
+#define AC97_SLOT_SPDIF_LEFT1	6
+#define AC97_SLOT_PCM_SLEFT	7	/* surround left */
+#define AC97_SLOT_PCM_LEFT_0	7	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT	7
+#define AC97_SLOT_PCM_SRIGHT	8	/* surround right */
+#define AC97_SLOT_PCM_RIGHT_0	8	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT	8
+#define AC97_SLOT_LFE		9
+#define AC97_SLOT_SPDIF_RIGHT1	9
+#define AC97_SLOT_MODEM_LINE2	10
+#define AC97_SLOT_PCM_LEFT_1	10	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT2	10
+#define AC97_SLOT_HANDSET	11	/* output */
+#define AC97_SLOT_PCM_RIGHT_1	11	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT2	11
+#define AC97_SLOT_MODEM_GPIO	12	/* modem GPIO */
+#define AC97_SLOT_PCM_CENTER_1	12	/* double rate operation */
+
+/* basic capabilities (reset register) */
+#define AC97_BC_DEDICATED_MIC	0x0001	/* Dedicated Mic PCM In Channel */
+#define AC97_BC_RESERVED1	0x0002	/* Reserved (was Modem Line Codec support) */
+#define AC97_BC_BASS_TREBLE	0x0004	/* Bass & Treble Control */
+#define AC97_BC_SIM_STEREO	0x0008	/* Simulated stereo */
+#define AC97_BC_HEADPHONE	0x0010	/* Headphone Out Support */
+#define AC97_BC_LOUDNESS	0x0020	/* Loudness (bass boost) Support */
+#define AC97_BC_16BIT_DAC	0x0000	/* 16-bit DAC resolution */
+#define AC97_BC_18BIT_DAC	0x0040	/* 18-bit DAC resolution */
+#define AC97_BC_20BIT_DAC	0x0080	/* 20-bit DAC resolution */
+#define AC97_BC_DAC_MASK	0x00c0
+#define AC97_BC_16BIT_ADC	0x0000	/* 16-bit ADC resolution */
+#define AC97_BC_18BIT_ADC	0x0100	/* 18-bit ADC resolution */
+#define AC97_BC_20BIT_ADC	0x0200	/* 20-bit ADC resolution */
+#define AC97_BC_ADC_MASK	0x0300
+
+/* general purpose */
+#define AC97_GP_DRSS_MASK	0x0c00	/* double rate slot select */
+#define AC97_GP_DRSS_1011	0x0000	/* LR(C) 10+11(+12) */
+#define AC97_GP_DRSS_78		0x0400	/* LR 7+8 */
+
+/* extended audio ID bit defines */
+#define AC97_EI_VRA		0x0001	/* Variable bit rate supported */
+#define AC97_EI_DRA		0x0002	/* Double rate supported */
+#define AC97_EI_SPDIF		0x0004	/* S/PDIF out supported */
+#define AC97_EI_VRM		0x0008	/* Variable bit rate supported for MIC */
+#define AC97_EI_DACS_SLOT_MASK	0x0030	/* DACs slot assignment */
+#define AC97_EI_DACS_SLOT_SHIFT	4
+#define AC97_EI_CDAC		0x0040	/* PCM Center DAC available */
+#define AC97_EI_SDAC		0x0080	/* PCM Surround DACs available */
+#define AC97_EI_LDAC		0x0100	/* PCM LFE DAC available */
+#define AC97_EI_AMAP		0x0200	/* indicates optional slot/DAC mapping based on codec ID */
+#define AC97_EI_REV_MASK	0x0c00	/* AC'97 revision mask */
+#define AC97_EI_REV_22		0x0400	/* AC'97 revision 2.2 */
+#define AC97_EI_REV_23		0x0800	/* AC'97 revision 2.3 */
+#define AC97_EI_REV_SHIFT	10
+#define AC97_EI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_EI_ADDR_SHIFT	14
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA		0x0001	/* Variable bit rate enable bit */
+#define AC97_EA_DRA		0x0002	/* Double-rate audio enable bit */
+#define AC97_EA_SPDIF		0x0004	/* S/PDIF out enable bit */
+#define AC97_EA_VRM		0x0008	/* Variable bit rate for MIC enable bit */
+#define AC97_EA_SPSA_SLOT_MASK	0x0030	/* Mask for slot assignment bits */
+#define AC97_EA_SPSA_SLOT_SHIFT 4
+#define AC97_EA_SPSA_3_4	0x0000	/* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8	0x0010	/* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9	0x0020	/* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11	0x0030	/* Slot assigned to 10 & 11 */
+#define AC97_EA_CDAC		0x0040	/* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC		0x0080	/* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC		0x0100	/* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC		0x0200	/* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV		0x0400	/* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI		0x0800	/* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ		0x1000	/* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK		0x2000	/* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL		0x4000	/* Turns the MIC ADC off */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO		0x0001	/* Professional status */
+#define AC97_SC_NAUDIO		0x0002	/* Non audio stream */
+#define AC97_SC_COPY		0x0004	/* Copyright status */
+#define AC97_SC_PRE		0x0008	/* Preemphasis status */
+#define AC97_SC_CC_MASK		0x07f0	/* Category Code mask */
+#define AC97_SC_CC_SHIFT	4
+#define AC97_SC_L		0x0800	/* Generation Level status */
+#define AC97_SC_SPSR_MASK	0x3000	/* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_SHIFT	12
+#define AC97_SC_SPSR_44K	0x0000	/* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K	0x2000	/* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K	0x3000	/* Use 32kHz Sample rate */
+#define AC97_SC_DRS		0x4000	/* Double Rate S/PDIF */
+#define AC97_SC_V		0x8000	/* Validity status */
+
+/* Interrupt and Paging bit defines (AC'97 2.3) */
+#define AC97_PAGE_MASK		0x000f	/* Page Selector */
+#define AC97_PAGE_VENDOR	0	/* Vendor-specific registers */
+#define AC97_PAGE_1		1	/* Extended Codec Registers page 1 */
+#define AC97_INT_ENABLE		0x0800	/* Interrupt Enable */
+#define AC97_INT_SENSE		0x1000	/* Sense Cycle */
+#define AC97_INT_CAUSE_SENSE	0x2000	/* Sense Cycle Completed (RO) */
+#define AC97_INT_CAUSE_GPIO	0x4000	/* GPIO bits changed (RO) */
+#define AC97_INT_STATUS		0x8000	/* Interrupt Status */
+
+/* extended modem ID bit defines */
+#define AC97_MEI_LINE1		0x0001	/* Line1 present */
+#define AC97_MEI_LINE2		0x0002	/* Line2 present */
+#define AC97_MEI_HANDSET	0x0004	/* Handset present */
+#define AC97_MEI_CID1		0x0008	/* caller ID decode for Line1 is supported */
+#define AC97_MEI_CID2		0x0010	/* caller ID decode for Line2 is supported */
+#define AC97_MEI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_MEI_ADDR_SHIFT	14
+
+/* extended modem status and control bit defines */
+#define AC97_MEA_GPIO		0x0001	/* GPIO is ready (ro) */
+#define AC97_MEA_MREF		0x0002	/* Vref is up to nominal level (ro) */
+#define AC97_MEA_ADC1		0x0004	/* ADC1 operational (ro) */
+#define AC97_MEA_DAC1		0x0008	/* DAC1 operational (ro) */
+#define AC97_MEA_ADC2		0x0010	/* ADC2 operational (ro) */
+#define AC97_MEA_DAC2		0x0020	/* DAC2 operational (ro) */
+#define AC97_MEA_HADC		0x0040	/* HADC operational (ro) */
+#define AC97_MEA_HDAC		0x0080	/* HDAC operational (ro) */
+#define AC97_MEA_PRA		0x0100	/* GPIO power down (high) */
+#define AC97_MEA_PRB		0x0200	/* reserved */
+#define AC97_MEA_PRC		0x0400	/* ADC1 power down (high) */
+#define AC97_MEA_PRD		0x0800	/* DAC1 power down (high) */
+#define AC97_MEA_PRE		0x1000	/* ADC2 power down (high) */
+#define AC97_MEA_PRF		0x2000	/* DAC2 power down (high) */
+#define AC97_MEA_PRG		0x4000	/* HADC power down (high) */
+#define AC97_MEA_PRH		0x8000	/* HDAC power down (high) */
+
+/* modem gpio status defines */
+#define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
+#define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
+#define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
+#define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
+#define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
+#define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
+#define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
+#define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
+#define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
+#define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
+#define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
+#define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
+#define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
+#define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
+#define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
+#define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */
+
+/* specific - SigmaTel */
+#define AC97_SIGMATEL_OUTSEL	0x64	/* Output Select, STAC9758 */
+#define AC97_SIGMATEL_INSEL	0x66	/* Input Select, STAC9758 */
+#define AC97_SIGMATEL_IOMISC	0x68	/* STAC9758 */
+#define AC97_SIGMATEL_ANALOG	0x6c	/* Analog Special */
+#define AC97_SIGMATEL_DAC2INVERT 0x6e
+#define AC97_SIGMATEL_BIAS1	0x70
+#define AC97_SIGMATEL_BIAS2	0x72
+#define AC97_SIGMATEL_VARIOUS	0x72	/* STAC9758 */
+#define AC97_SIGMATEL_MULTICHN	0x74	/* Multi-Channel programming */
+#define AC97_SIGMATEL_CIC1	0x76
+#define AC97_SIGMATEL_CIC2	0x78
+
+/* specific - Analog Devices */
+#define AC97_AD_TEST		0x5a	/* test register */
+#define AC97_AD_CODEC_CFG	0x70	/* codec configuration */
+#define AC97_AD_JACK_SPDIF	0x72	/* Jack Sense & S/PDIF */
+#define AC97_AD_SERIAL_CFG	0x74	/* Serial Configuration */
+#define AC97_AD_MISC		0x76	/* Misc Control Bits */
+
+/* specific - Cirrus Logic */
+#define AC97_CSR_ACMODE		0x5e	/* AC Mode Register */
+#define AC97_CSR_MISC_CRYSTAL	0x60	/* Misc Crystal Control */
+#define AC97_CSR_SPDIF		0x68	/* S/PDIF Register */
+#define AC97_CSR_SERIAL		0x6a	/* Serial Port Control */
+#define AC97_CSR_SPECF_ADDR	0x6c	/* Special Feature Address */
+#define AC97_CSR_SPECF_DATA	0x6e	/* Special Feature Data */
+#define AC97_CSR_BDI_STATUS	0x7a	/* BDI Status */
+
+/* specific - Conexant */
+#define AC97_CXR_AUDIO_MISC	0x5c
+#define AC97_CXR_SPDIFEN	(1<<3)
+#define AC97_CXR_COPYRGT	(1<<2)
+#define AC97_CXR_SPDIF_MASK	(3<<0)
+#define AC97_CXR_SPDIF_PCM	0x0
+#define AC97_CXR_SPDIF_AC3	0x2
+
+/* specific - ALC */
+#define AC97_ALC650_SPDIF_INPUT_STATUS1	0x60
+/* S/PDIF input status 1 bit defines */
+#define AC97_ALC650_PRO             0x0001  /* Professional status */
+#define AC97_ALC650_NAUDIO          0x0002  /* Non audio stream */
+#define AC97_ALC650_COPY            0x0004  /* Copyright status */
+#define AC97_ALC650_PRE             0x0038  /* Preemphasis status */
+#define AC97_ALC650_PRE_SHIFT       3
+#define AC97_ALC650_MODE            0x00C0  /* Preemphasis status */
+#define AC97_ALC650_MODE_SHIFT      6
+#define AC97_ALC650_CC_MASK         0x7f00  /* Category Code mask */
+#define AC97_ALC650_CC_SHIFT        8
+#define AC97_ALC650_L               0x8000  /* Generation Level status */
+
+#define AC97_ALC650_SPDIF_INPUT_STATUS2	0x62
+/* S/PDIF input status 2 bit defines */
+#define AC97_ALC650_SOUCE_MASK      0x000f  /* Source number */
+#define AC97_ALC650_CHANNEL_MASK    0x00f0  /* Channel number */
+#define AC97_ALC650_CHANNEL_SHIFT   4 
+#define AC97_ALC650_SPSR_MASK       0x0f00  /* S/PDIF Sample Rate bits */
+#define AC97_ALC650_SPSR_SHIFT      8
+#define AC97_ALC650_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
+#define AC97_ALC650_SPSR_48K        0x0200  /* Use 48kHz Sample rate */
+#define AC97_ALC650_SPSR_32K        0x0300  /* Use 32kHz Sample rate */
+#define AC97_ALC650_CLOCK_ACCURACY  0x3000  /* Clock accuracy */
+#define AC97_ALC650_CLOCK_SHIFT     12
+#define AC97_ALC650_CLOCK_LOCK      0x4000  /* Clock locked status */
+#define AC97_ALC650_V               0x8000  /* Validity status */
+
+#define AC97_ALC650_SURR_DAC_VOL	0x64
+#define AC97_ALC650_LFE_DAC_VOL		0x66
+#define AC97_ALC650_UNKNOWN1		0x68
+#define AC97_ALC650_MULTICH		0x6a
+#define AC97_ALC650_UNKNOWN2		0x6c
+#define AC97_ALC650_REVISION		0x6e
+#define AC97_ALC650_UNKNOWN3		0x70
+#define AC97_ALC650_UNKNOWN4		0x72
+#define AC97_ALC650_MISC		0x74
+#define AC97_ALC650_GPIO_SETUP		0x76
+#define AC97_ALC650_GPIO_STATUS		0x78
+#define AC97_ALC650_CLOCK		0x7a
+
+/* specific - Yamaha YMF753 */
+#define AC97_YMF753_DIT_CTRL2	0x66	/* DIT Control 2 */
+#define AC97_YMF753_3D_MODE_SEL	0x68	/* 3D Mode Select */
+
+/* specific - C-Media */
+#define AC97_CM9738_VENDOR_CTRL	0x5a
+#define AC97_CM9739_MULTI_CHAN	0x64
+#define AC97_CM9739_SPDIF_IN_STATUS	0x68 /* 32bit */
+#define AC97_CM9739_SPDIF_CTRL	0x6c
+
+/* specific - wolfson */
+#define AC97_WM97XX_FMIXER_VOL  0x72
+#define AC97_WM9704_RMIXER_VOL  0x74
+#define AC97_WM9704_TEST        0x5a
+#define AC97_WM9704_RPCM_VOL    0x70
+#define AC97_WM9711_OUT3VOL     0x16
+
+
+/* ac97->scaps */
+#define AC97_SCAP_AUDIO		(1<<0)	/* audio codec 97 */
+#define AC97_SCAP_MODEM		(1<<1)	/* modem codec 97 */
+#define AC97_SCAP_SURROUND_DAC	(1<<2)	/* surround L&R DACs are present */
+#define AC97_SCAP_CENTER_LFE_DAC (1<<3)	/* center and LFE DACs are present */
+#define AC97_SCAP_SKIP_AUDIO	(1<<4)	/* skip audio part of codec */
+#define AC97_SCAP_SKIP_MODEM	(1<<5)	/* skip modem part of codec */
+#define AC97_SCAP_INDEP_SDIN	(1<<6)	/* independent SDIN */
+#define AC97_SCAP_INV_EAPD	(1<<7)	/* inverted EAPD */
+#define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
+#define AC97_SCAP_NO_SPDIF	(1<<9)	/* don't build SPDIF controls */
+
+/* ac97->flags */
+#define AC97_HAS_PC_BEEP	(1<<0)	/* force PC Speaker usage */
+#define AC97_AD_MULTI		(1<<1)	/* Analog Devices - multi codecs */
+#define AC97_CS_SPDIF		(1<<2)	/* Cirrus Logic uses funky SPDIF */
+#define AC97_CX_SPDIF		(1<<3)	/* Conexant's spdif interface */
+#define AC97_STEREO_MUTES	(1<<4)	/* has stereo mute bits */
+#define AC97_DOUBLE_RATE	(1<<5)	/* supports double rate playback */
+#define AC97_HAS_NO_MASTER_VOL	(1<<6)	/* no Master volume */
+#define AC97_HAS_NO_PCM_VOL	(1<<7)	/* no PCM volume */
+#define AC97_DEFAULT_POWER_OFF	(1<<8)	/* no RESET write */
+#define AC97_MODEM_PATCH	(1<<9)	/* modem patch */
+#define AC97_HAS_NO_REC_GAIN	(1<<10) /* no Record gain */
+#define AC97_HAS_NO_PHONE	(1<<11) /* no PHONE volume */
+#define AC97_HAS_NO_PC_BEEP	(1<<12) /* no PC Beep volume */
+#define AC97_HAS_NO_VIDEO	(1<<13) /* no Video volume */
+#define AC97_HAS_NO_CD		(1<<14) /* no CD volume */
+
+/* rates indexes */
+#define AC97_RATES_FRONT_DAC	0
+#define AC97_RATES_SURR_DAC	1
+#define AC97_RATES_LFE_DAC	2
+#define AC97_RATES_ADC		3
+#define AC97_RATES_MIC_ADC	4
+#define AC97_RATES_SPDIF	5
+
+/* shared controllers */
+enum {
+	AC97_SHARED_TYPE_NONE,
+	AC97_SHARED_TYPE_ICH,
+	AC97_SHARED_TYPE_ATIIXP,
+	AC97_SHARED_TYPE_VIA,
+	AC97_SHARED_TYPES
+};
+
+/*
+ *
+ */
+
+typedef struct _snd_ac97_bus ac97_bus_t;
+typedef struct _snd_ac97_bus_ops ac97_bus_ops_t;
+typedef struct _snd_ac97_template ac97_template_t;
+typedef struct _snd_ac97 ac97_t;
+
+enum ac97_pcm_cfg {
+	AC97_PCM_CFG_FRONT = 2,
+	AC97_PCM_CFG_REAR = 10,		/* alias surround */
+	AC97_PCM_CFG_LFE = 11,		/* center + lfe */
+	AC97_PCM_CFG_40 = 4,		/* front + rear */
+	AC97_PCM_CFG_51 = 6,		/* front + rear + center/lfe */
+	AC97_PCM_CFG_SPDIF = 20
+};
+
+/* PCM allocation */
+struct ac97_pcm {
+	ac97_bus_t *bus;
+	unsigned int stream: 1,	   	   /* stream type: 1 = capture */
+		     exclusive: 1,	   /* exclusive mode, don't override with other pcms */
+		     copy_flag: 1,	   /* lowlevel driver must fill all entries */
+		     spdif: 1;		   /* spdif pcm */
+	unsigned short aslots;		   /* active slots */
+	unsigned int rates;		   /* available rates */
+	struct {
+		unsigned short slots;	   /* driver input: requested AC97 slot numbers */
+		unsigned short rslots[4];  /* allocated slots per codecs */
+		unsigned char rate_table[4];
+		ac97_t *codec[4];	   /* allocated codecs */
+	} r[2];				   /* 0 = standard rates, 1 = double rates */
+	unsigned long private_value;	   /* used by the hardware driver */
+};
+
+struct snd_ac97_build_ops {
+	int (*build_3d) (ac97_t *ac97);
+	int (*build_specific) (ac97_t *ac97);
+	int (*build_spdif) (ac97_t *ac97);
+	int (*build_post_spdif) (ac97_t *ac97);
+#ifdef CONFIG_PM
+	void (*suspend) (ac97_t *ac97);
+	void (*resume) (ac97_t *ac97);
+#endif
+};
+
+struct _snd_ac97_bus_ops {
+	void (*reset) (ac97_t *ac97);
+	void (*write) (ac97_t *ac97, unsigned short reg, unsigned short val);
+	unsigned short (*read) (ac97_t *ac97, unsigned short reg);
+	void (*wait) (ac97_t *ac97);
+	void (*init) (ac97_t *ac97);
+};
+
+struct _snd_ac97_bus {
+	/* -- lowlevel (hardware) driver specific -- */
+	ac97_bus_ops_t *ops;
+	void *private_data;
+	void (*private_free) (ac97_bus_t *bus);
+	/* --- */
+	snd_card_t *card;
+	unsigned short num;	/* bus number */
+	unsigned short no_vra: 1, /* bridge doesn't support VRA */
+		       dra: 1,	/* bridge supports double rate */
+		       isdin: 1;/* independent SDIN */
+	unsigned int clock;	/* AC'97 base clock (usually 48000Hz) */
+	spinlock_t bus_lock;	/* used mainly for slot allocation */
+	unsigned short used_slots[2][4]; /* actually used PCM slots */
+	unsigned short pcms_count; /* count of PCMs */
+	struct ac97_pcm *pcms;
+	unsigned int shared_type;	/* type of shared controller betwen audio and modem */
+	ac97_t *codec[4];
+	snd_info_entry_t *proc;
+};
+
+struct _snd_ac97_template {
+	void *private_data;
+	void (*private_free) (ac97_t *ac97);
+	struct pci_dev *pci;	/* assigned PCI device - used for quirks */
+	unsigned short num;	/* number of codec: 0 = primary, 1 = secondary */
+	unsigned short addr;	/* physical address of codec [0-3] */
+	unsigned int scaps;	/* driver capabilities */
+	unsigned int limited_regs; /* allow limited registers only */
+	DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
+};
+
+struct _snd_ac97 {
+	/* -- lowlevel (hardware) driver specific -- */
+	struct snd_ac97_build_ops * build_ops;
+	void *private_data;
+	void (*private_free) (ac97_t *ac97);
+	/* --- */
+	ac97_bus_t *bus;
+	struct pci_dev *pci;	/* assigned PCI device - used for quirks */
+	snd_info_entry_t *proc;
+	snd_info_entry_t *proc_regs;
+	unsigned short subsystem_vendor;
+	unsigned short subsystem_device;
+	struct semaphore reg_mutex;
+	struct semaphore page_mutex;	/* mutex for AD18xx multi-codecs and paging (2.3) */
+	unsigned short num;	/* number of codec: 0 = primary, 1 = secondary */
+	unsigned short addr;	/* physical address of codec [0-3] */
+	unsigned int id;	/* identification of codec */
+	unsigned short caps;	/* capabilities (register 0) */
+	unsigned short ext_id;	/* extended feature identification (register 28) */
+	unsigned short ext_mid;	/* extended modem ID (register 3C) */
+	unsigned int scaps;	/* driver capabilities */
+	unsigned int flags;	/* specific code */
+	unsigned int rates[6];	/* see AC97_RATES_* defines */
+	unsigned int spdif_status;
+	unsigned short regs[0x80]; /* register cache */
+	unsigned int limited_regs; /* allow limited registers only */
+	DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
+	union {			/* vendor specific code */
+		struct {
+			unsigned short unchained[3];	// 0 = C34, 1 = C79, 2 = C69
+			unsigned short chained[3];	// 0 = C34, 1 = C79, 2 = C69
+			unsigned short id[3];		// codec IDs (lower 16-bit word)
+			unsigned short pcmreg[3];	// PCM registers
+			unsigned short codec_cfg[3];	// CODEC_CFG bits
+		} ad18xx;
+		unsigned int dev_flags;		/* device specific */
+	} spec;
+};
+
+/* conditions */
+static inline int ac97_is_audio(ac97_t * ac97)
+{
+	return (ac97->scaps & AC97_SCAP_AUDIO);
+}
+static inline int ac97_is_modem(ac97_t * ac97)
+{
+	return (ac97->scaps & AC97_SCAP_MODEM);
+}
+static inline int ac97_is_rev22(ac97_t * ac97)
+{
+	return (ac97->ext_id & AC97_EI_REV_MASK) >= AC97_EI_REV_22;
+}
+static inline int ac97_can_amap(ac97_t * ac97)
+{
+	return (ac97->ext_id & AC97_EI_AMAP) != 0;
+}
+static inline int ac97_can_spdif(ac97_t * ac97)
+{
+	return (ac97->ext_id & AC97_EI_SPDIF) != 0;
+}
+
+/* functions */
+int snd_ac97_bus(snd_card_t *card, int num, ac97_bus_ops_t *ops, void *private_data, ac97_bus_t **rbus); /* create new AC97 bus */
+int snd_ac97_mixer(ac97_bus_t *bus, ac97_template_t *template, ac97_t **rac97);	/* create mixer controls */
+const char *snd_ac97_get_short_name(ac97_t *ac97);
+
+void snd_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short value);
+unsigned short snd_ac97_read(ac97_t *ac97, unsigned short reg);
+void snd_ac97_write_cache(ac97_t *ac97, unsigned short reg, unsigned short value);
+int snd_ac97_update(ac97_t *ac97, unsigned short reg, unsigned short value);
+int snd_ac97_update_bits(ac97_t *ac97, unsigned short reg, unsigned short mask, unsigned short value);
+#ifdef CONFIG_PM
+void snd_ac97_suspend(ac97_t *ac97);
+void snd_ac97_resume(ac97_t *ac97);
+#endif
+
+/* quirk types */
+enum {
+	AC97_TUNE_DEFAULT = -1,	/* use default from quirk list (not valid in list) */
+	AC97_TUNE_NONE = 0,	/* nothing extra to do */
+	AC97_TUNE_HP_ONLY,	/* headphone (true line-out) control as master only */
+	AC97_TUNE_SWAP_HP,	/* swap headphone and master controls */
+	AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
+	AC97_TUNE_AD_SHARING,	/* for AD1985, turn on OMS bit and use headphone */
+	AC97_TUNE_ALC_JACK,	/* for Realtek, enable JACK detection */
+	AC97_TUNE_INV_EAPD,	/* inverted EAPD implementation */
+	AC97_TUNE_MUTE_LED,	/* EAPD bit works as mute LED */
+};
+
+struct ac97_quirk {
+	unsigned short vendor;	/* PCI vendor id */
+	unsigned short device;	/* PCI device id */
+	unsigned short mask;	/* device id bit mask, 0 = accept all */
+	unsigned int codec_id;	/* codec id (if any), 0 = accept all */
+	const char *name;	/* name shown as info */
+	int type;		/* quirk type above */
+};
+
+int snd_ac97_tune_hardware(ac97_t *ac97, struct ac97_quirk *quirk, const char *override);
+int snd_ac97_set_rate(ac97_t *ac97, int reg, unsigned int rate);
+
+int snd_ac97_pcm_assign(ac97_bus_t *ac97,
+			unsigned short pcms_count,
+			const struct ac97_pcm *pcms);
+int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
+		      enum ac97_pcm_cfg cfg, unsigned short slots);
+int snd_ac97_pcm_close(struct ac97_pcm *pcm);
+int snd_ac97_pcm_double_rate_rules(snd_pcm_runtime_t *runtime);
+
+struct ac97_enum {
+	unsigned char reg;
+	unsigned char shift_l;
+	unsigned char shift_r;
+	unsigned short mask;
+	const char **texts;
+};
+#endif /* __SOUND_AC97_CODEC_H */
diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h
new file mode 100644
index 000000000000..395978e375cf
--- /dev/null
+++ b/include/sound/ad1816a.h
@@ -0,0 +1,174 @@
+#ifndef __SOUND_AD1816A_H
+#define __SOUND_AD1816A_H
+
+/*
+    ad1816a.h - definitions for ADI SoundPort AD1816A chip.
+    Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio@libero.it>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include "control.h"
+#include "pcm.h"
+#include "timer.h"
+
+#define AD1816A_REG(r)			(chip->port + r)
+
+#define AD1816A_CHIP_STATUS		0x00
+#define AD1816A_INDIR_ADDR		0x00
+#define AD1816A_INTERRUPT_STATUS	0x01
+#define AD1816A_INDIR_DATA_LOW		0x02
+#define AD1816A_INDIR_DATA_HIGH		0x03
+#define AD1816A_PIO_DEBUG		0x04
+#define AD1816A_PIO_STATUS		0x05
+#define AD1816A_PIO_DATA		0x06
+#define AD1816A_RESERVED_7		0x07
+#define AD1816A_PLAYBACK_CONFIG		0x08
+#define AD1816A_CAPTURE_CONFIG		0x09
+#define AD1816A_RESERVED_10		0x0a
+#define AD1816A_RESERVED_11		0x0b
+#define AD1816A_JOYSTICK_RAW_DATA	0x0c
+#define AD1816A_JOYSTICK_CTRL		0x0d
+#define AD1816A_JOY_POS_DATA_LOW	0x0e
+#define AD1816A_JOY_POS_DATA_HIGH	0x0f
+
+#define AD1816A_LOW_BYTE_TMP		0x00
+#define AD1816A_INTERRUPT_ENABLE	0x01
+#define AD1816A_EXTERNAL_CTRL		0x01
+#define AD1816A_PLAYBACK_SAMPLE_RATE	0x02
+#define AD1816A_CAPTURE_SAMPLE_RATE	0x03
+#define AD1816A_VOICE_ATT		0x04
+#define AD1816A_FM_ATT			0x05
+#define AD1816A_I2S_1_ATT		0x06
+#define AD1816A_I2S_0_ATT		0x07
+#define AD1816A_PLAYBACK_BASE_COUNT	0x08
+#define AD1816A_PLAYBACK_CURR_COUNT	0x09
+#define AD1816A_CAPTURE_BASE_COUNT	0x0a
+#define AD1816A_CAPTURE_CURR_COUNT	0x0b
+#define AD1816A_TIMER_BASE_COUNT	0x0c
+#define AD1816A_TIMER_CURR_COUNT	0x0d
+#define AD1816A_MASTER_ATT		0x0e
+#define AD1816A_CD_GAIN_ATT		0x0f
+#define AD1816A_SYNTH_GAIN_ATT		0x10
+#define AD1816A_VID_GAIN_ATT		0x11
+#define AD1816A_LINE_GAIN_ATT		0x12
+#define AD1816A_MIC_GAIN_ATT		0x13
+#define AD1816A_PHONE_IN_GAIN_ATT	0x13
+#define AD1816A_ADC_SOURCE_SEL		0x14
+#define AD1816A_ADC_PGA			0x14
+#define AD1816A_CHIP_CONFIG		0x20
+#define AD1816A_DSP_CONFIG		0x21
+#define AD1816A_FM_SAMPLE_RATE		0x22
+#define AD1816A_I2S_1_SAMPLE_RATE	0x23
+#define AD1816A_I2S_0_SAMPLE_RATE	0x24
+#define AD1816A_RESERVED_37		0x25
+#define AD1816A_PROGRAM_CLOCK_RATE	0x26
+#define AD1816A_3D_PHAT_CTRL		0x27
+#define AD1816A_PHONE_OUT_ATT		0x27
+#define AD1816A_RESERVED_40		0x28
+#define AD1816A_HW_VOL_BUT		0x29
+#define AD1816A_DSP_MAILBOX_0		0x2a
+#define AD1816A_DSP_MAILBOX_1		0x2b
+#define AD1816A_POWERDOWN_CTRL		0x2c
+#define AD1816A_TIMER_CTRL		0x2c
+#define AD1816A_VERSION_ID		0x2d
+#define AD1816A_RESERVED_46		0x2e
+
+#define AD1816A_READY			0x80
+
+#define AD1816A_PLAYBACK_IRQ_PENDING	0x80
+#define AD1816A_CAPTURE_IRQ_PENDING	0x40
+#define AD1816A_TIMER_IRQ_PENDING	0x20
+
+#define AD1816A_PLAYBACK_ENABLE		0x01
+#define AD1816A_PLAYBACK_PIO		0x02
+#define AD1816A_CAPTURE_ENABLE		0x01
+#define AD1816A_CAPTURE_PIO		0x02
+
+#define AD1816A_FMT_LINEAR_8		0x00
+#define AD1816A_FMT_ULAW_8		0x08
+#define AD1816A_FMT_LINEAR_16_LIT	0x10
+#define AD1816A_FMT_ALAW_8		0x18
+#define AD1816A_FMT_LINEAR_16_BIG	0x30
+#define AD1816A_FMT_ALL			0x38
+#define AD1816A_FMT_STEREO		0x04
+
+#define AD1816A_PLAYBACK_IRQ_ENABLE	0x8000
+#define AD1816A_CAPTURE_IRQ_ENABLE	0x4000
+#define AD1816A_TIMER_IRQ_ENABLE	0x2000
+#define AD1816A_TIMER_ENABLE		0x0080
+
+#define AD1816A_SRC_LINE		0x00
+#define AD1816A_SRC_OUT			0x10
+#define AD1816A_SRC_CD			0x20
+#define AD1816A_SRC_SYNTH		0x30
+#define AD1816A_SRC_VIDEO		0x40
+#define AD1816A_SRC_MIC			0x50
+#define AD1816A_SRC_MONO		0x50
+#define AD1816A_SRC_PHONE_IN		0x60
+#define AD1816A_SRC_MASK		0x70
+
+#define AD1816A_CAPTURE_NOT_EQUAL	0x1000
+#define AD1816A_WSS_ENABLE		0x8000
+
+typedef struct _snd_ad1816a ad1816a_t;
+
+struct _snd_ad1816a {
+	unsigned long port;
+	struct resource *res_port;
+	int irq;
+	int dma1;
+	int dma2;
+
+	unsigned short hardware;
+	unsigned short version;
+
+	spinlock_t lock;
+
+	unsigned short mode;
+
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+	unsigned int p_dma_size;
+	unsigned int c_dma_size;
+
+	snd_timer_t *timer;
+};
+
+
+#define AD1816A_HW_AUTO		0
+#define AD1816A_HW_AD1816A	1
+#define AD1816A_HW_AD1815	2
+#define AD1816A_HW_AD18MAX10	3
+
+#define AD1816A_MODE_PLAYBACK	0x01
+#define AD1816A_MODE_CAPTURE	0x02
+#define AD1816A_MODE_TIMER	0x04
+#define AD1816A_MODE_OPEN	(AD1816A_MODE_PLAYBACK |	\
+				AD1816A_MODE_CAPTURE |		\
+				AD1816A_MODE_TIMER)
+
+
+extern int snd_ad1816a_create(snd_card_t *card, unsigned long port,
+			      int irq, int dma1, int dma2,
+			      ad1816a_t **chip);
+
+extern int snd_ad1816a_pcm(ad1816a_t *chip, int device, snd_pcm_t **rpcm);
+extern int snd_ad1816a_mixer(ad1816a_t *chip);
+
+#endif	/* __SOUND_AD1816A_H */
diff --git a/include/sound/ad1848.h b/include/sound/ad1848.h
new file mode 100644
index 000000000000..7e33b11037f2
--- /dev/null
+++ b/include/sound/ad1848.h
@@ -0,0 +1,206 @@
+#ifndef __SOUND_AD1848_H
+#define __SOUND_AD1848_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *  Definitions for AD1847/AD1848/CS4248 chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include <linux/interrupt.h>
+
+/* IO ports */
+
+#define AD1848P( codec, x ) ( (chip) -> port + c_d_c_AD1848##x )
+
+#define c_d_c_AD1848REGSEL	0
+#define c_d_c_AD1848REG		1
+#define c_d_c_AD1848STATUS	2
+#define c_d_c_AD1848PIO		3
+
+/* codec registers */
+
+#define AD1848_LEFT_INPUT	0x00	/* left input control */
+#define AD1848_RIGHT_INPUT	0x01	/* right input control */
+#define AD1848_AUX1_LEFT_INPUT	0x02	/* left AUX1 input control */
+#define AD1848_AUX1_RIGHT_INPUT	0x03	/* right AUX1 input control */
+#define AD1848_AUX2_LEFT_INPUT	0x04	/* left AUX2 input control */
+#define AD1848_AUX2_RIGHT_INPUT	0x05	/* right AUX2 input control */
+#define AD1848_LEFT_OUTPUT	0x06	/* left output control register */
+#define AD1848_RIGHT_OUTPUT	0x07	/* right output control register */
+#define AD1848_DATA_FORMAT	0x08	/* clock and data format - playback/capture - bits 7-0 MCE */
+#define AD1848_IFACE_CTRL	0x09	/* interface control - bits 7-2 MCE */
+#define AD1848_PIN_CTRL		0x0a	/* pin control */
+#define AD1848_TEST_INIT	0x0b	/* test and initialization */
+#define AD1848_MISC_INFO	0x0c	/* miscellaneaous information */
+#define AD1848_LOOPBACK		0x0d	/* loopback control */
+#define AD1848_DATA_UPR_CNT	0x0e	/* playback/capture upper base count */
+#define AD1848_DATA_LWR_CNT	0x0f	/* playback/capture lower base count */
+
+/* definitions for codec register select port - CODECP( REGSEL ) */
+
+#define AD1848_INIT		0x80	/* CODEC is initializing */
+#define AD1848_MCE		0x40	/* mode change enable */
+#define AD1848_TRD		0x20	/* transfer request disable */
+
+/* definitions for codec status register - CODECP( STATUS ) */
+
+#define AD1848_GLOBALIRQ	0x01	/* IRQ is active */
+
+/* definitions for AD1848_LEFT_INPUT and AD1848_RIGHT_INPUT registers */
+
+#define AD1848_ENABLE_MIC_GAIN	0x20
+
+#define AD1848_MIXS_LINE1	0x00
+#define AD1848_MIXS_AUX1	0x40
+#define AD1848_MIXS_LINE2	0x80
+#define AD1848_MIXS_ALL		0xc0
+
+/* definitions for clock and data format register - AD1848_PLAYBK_FORMAT */
+
+#define AD1848_LINEAR_8		0x00	/* 8-bit unsigned data */
+#define AD1848_ALAW_8		0x60	/* 8-bit A-law companded */
+#define AD1848_ULAW_8		0x20	/* 8-bit U-law companded */
+#define AD1848_LINEAR_16	0x40	/* 16-bit twos complement data - little endian */
+#define AD1848_STEREO		0x10	/* stereo mode */
+/* bits 3-1 define frequency divisor */
+#define AD1848_XTAL1		0x00	/* 24.576 crystal */
+#define AD1848_XTAL2		0x01	/* 16.9344 crystal */
+
+/* definitions for interface control register - AD1848_IFACE_CTRL */
+
+#define AD1848_CAPTURE_PIO	0x80	/* capture PIO enable */
+#define AD1848_PLAYBACK_PIO	0x40	/* playback PIO enable */
+#define AD1848_CALIB_MODE	0x18	/* calibration mode bits */
+#define AD1848_AUTOCALIB	0x08	/* auto calibrate */
+#define AD1848_SINGLE_DMA	0x04	/* use single DMA channel */
+#define AD1848_CAPTURE_ENABLE	0x02	/* capture enable */
+#define AD1848_PLAYBACK_ENABLE	0x01	/* playback enable */
+
+/* definitions for pin control register - AD1848_PIN_CTRL */
+
+#define AD1848_IRQ_ENABLE	0x02	/* enable IRQ */
+#define AD1848_XCTL1		0x40	/* external control #1 */
+#define AD1848_XCTL0		0x80	/* external control #0 */
+
+/* definitions for test and init register - AD1848_TEST_INIT */
+
+#define AD1848_CALIB_IN_PROGRESS 0x20	/* auto calibrate in progress */
+#define AD1848_DMA_REQUEST	0x10	/* DMA request in progress */
+
+/* defines for codec.mode */
+
+#define AD1848_MODE_NONE	0x0000
+#define AD1848_MODE_PLAY	0x0001
+#define AD1848_MODE_CAPTURE	0x0002
+#define AD1848_MODE_TIMER	0x0004
+#define AD1848_MODE_OPEN	(AD1848_MODE_PLAY|AD1848_MODE_CAPTURE|AD1848_MODE_TIMER)
+#define AD1848_MODE_RUNNING	0x0010
+
+/* defines for codec.hardware */
+
+#define AD1848_HW_DETECT	0x0000	/* let AD1848 driver detect chip */
+#define AD1848_HW_AD1847	0x0001	/* AD1847 chip */
+#define AD1848_HW_AD1848	0x0002	/* AD1848 chip */
+#define AD1848_HW_CS4248	0x0003	/* CS4248 chip */
+#define AD1848_HW_CMI8330	0x0004	/* CMI8330 chip */
+#define AD1848_HW_THINKPAD	0x0005	/* Thinkpad 360/750/755 */
+
+/* IBM Thinkpad specific stuff */
+#define AD1848_THINKPAD_CTL_PORT1		0x15e8
+#define AD1848_THINKPAD_CTL_PORT2		0x15e9
+#define AD1848_THINKPAD_CS4248_ENABLE_BIT	0x02
+
+struct _snd_ad1848 {
+	unsigned long port;		/* i/o port */
+	struct resource *res_port;
+	int irq;			/* IRQ line */
+	int dma;			/* data DMA */
+	unsigned short version;		/* version of CODEC chip */
+	unsigned short mode;		/* see to AD1848_MODE_XXXX */
+	unsigned short hardware;	/* see to AD1848_HW_XXXX */
+	unsigned short single_dma:1;	/* forced single DMA mode (GUS 16-bit daughter board) or dma1 == dma2 */
+
+	snd_pcm_t *pcm;
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+	snd_card_t *card;
+
+	unsigned char image[32];	/* SGalaxy needs an access to extended registers */
+	int mce_bit;
+	int calibrate_mute;
+	int dma_size;
+	int thinkpad_flag;		/* Thinkpad CS4248 needs some extra help */
+
+	spinlock_t reg_lock;
+	struct semaphore open_mutex;
+};
+
+typedef struct _snd_ad1848 ad1848_t;
+
+/* exported functions */
+
+void snd_ad1848_out(ad1848_t *chip, unsigned char reg, unsigned char value);
+
+int snd_ad1848_create(snd_card_t * card,
+		      unsigned long port,
+		      int irq, int dma,
+		      unsigned short hardware,
+		      ad1848_t ** chip);
+
+int snd_ad1848_pcm(ad1848_t * chip, int device, snd_pcm_t **rpcm);
+const snd_pcm_ops_t *snd_ad1848_get_pcm_ops(int direction);
+int snd_ad1848_mixer(ad1848_t * chip);
+
+/* exported mixer stuffs */
+enum { AD1848_MIX_SINGLE, AD1848_MIX_DOUBLE, AD1848_MIX_CAPTURE };
+
+#define AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) \
+	((reg) | ((shift) << 8) | ((mask) << 16) | ((invert) << 24))
+#define AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) \
+	((left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | ((shift_right) << 19) | ((mask) << 24) | ((invert) << 22))
+
+int snd_ad1848_add_ctl(ad1848_t *chip, const char *name, int index, int type, unsigned long value);
+
+/* for ease of use */
+struct ad1848_mix_elem {
+	const char *name;
+	int index;
+	int type;
+	unsigned long private_value;
+};
+
+#define AD1848_SINGLE(xname, xindex, reg, shift, mask, invert) \
+{ .name = xname, \
+  .index = xindex, \
+  .type = AD1848_MIX_SINGLE, \
+  .private_value = AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) }
+
+#define AD1848_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
+{ .name = xname, \
+  .index = xindex, \
+  .type = AD1848_MIX_DOUBLE, \
+  .private_value = AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) }
+
+static inline int snd_ad1848_add_ctl_elem(ad1848_t *chip, const struct ad1848_mix_elem *c)
+{
+	return snd_ad1848_add_ctl(chip, c->name, c->index, c->type, c->private_value);
+}
+
+#endif /* __SOUND_AD1848_H */
diff --git a/include/sound/ainstr_fm.h b/include/sound/ainstr_fm.h
new file mode 100644
index 000000000000..0ec02953815a
--- /dev/null
+++ b/include/sound/ainstr_fm.h
@@ -0,0 +1,130 @@
+/*
+ *  Advanced Linux Sound Architecture
+ *
+ *  FM (OPL2/3) Instrument Format
+ *  Copyright (c) 2000 Uros Bizjak <uros@kss-loka.si>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_AINSTR_FM_H
+#define __SOUND_AINSTR_FM_H
+
+#ifndef __KERNEL__
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#endif
+
+/*
+ *  share types (share ID 1)
+ */
+
+#define FM_SHARE_FILE		0
+
+/*
+ * FM operator
+ */
+
+typedef struct fm_operator {
+	unsigned char am_vib;
+	unsigned char ksl_level;
+	unsigned char attack_decay;
+	unsigned char sustain_release;
+	unsigned char wave_select;
+} fm_operator_t;
+
+/*
+ *  Instrument
+ */
+
+#define FM_PATCH_OPL2	0x01		/* OPL2 2 operators FM instrument */
+#define FM_PATCH_OPL3	0x02		/* OPL3 4 operators FM instrument */
+
+typedef struct {
+	unsigned int share_id[4];	/* share id - zero = no sharing */
+	unsigned char type;		/* instrument type */
+
+	fm_operator_t op[4];
+	unsigned char feedback_connection[2];
+
+	unsigned char echo_delay;
+	unsigned char echo_atten;
+	unsigned char chorus_spread;
+	unsigned char trnsps;
+	unsigned char fix_dur;
+	unsigned char modes;
+	unsigned char fix_key;
+} fm_instrument_t;
+
+/*
+ *
+ *    Kernel <-> user space
+ *    Hardware (CPU) independent section
+ *
+ *    * = zero or more
+ *    + = one or more
+ *
+ *    fm_xinstrument	FM_STRU_INSTR
+ *
+ */
+
+#define FM_STRU_INSTR	__cpu_to_be32(('I'<<24)|('N'<<16)|('S'<<8)|'T')
+
+/*
+ * FM operator
+ */
+
+typedef struct fm_xoperator {
+	__u8 am_vib;
+	__u8 ksl_level;
+	__u8 attack_decay;
+	__u8 sustain_release;
+	__u8 wave_select;
+} fm_xoperator_t;
+
+/*
+ *  Instrument
+ */
+
+typedef struct fm_xinstrument {
+	__u32 stype;			/* structure type */
+
+	__u32 share_id[4];		/* share id - zero = no sharing */
+	__u8 type;			/* instrument type */
+
+	fm_xoperator_t op[4];		/* fm operators */
+	__u8 feedback_connection[2];
+
+	__u8 echo_delay;
+	__u8 echo_atten;
+	__u8 chorus_spread;
+	__u8 trnsps;
+	__u8 fix_dur;
+	__u8 modes;
+	__u8 fix_key;
+} fm_xinstrument_t;
+
+#ifdef __KERNEL__
+
+#include "seq_instr.h"
+
+int snd_seq_fm_init(snd_seq_kinstr_ops_t * ops,
+		    snd_seq_kinstr_ops_t * next);
+
+#endif
+
+#endif	/* __SOUND_AINSTR_FM_H */
diff --git a/include/sound/ainstr_gf1.h b/include/sound/ainstr_gf1.h
new file mode 100644
index 000000000000..ae2ddda63971
--- /dev/null
+++ b/include/sound/ainstr_gf1.h
@@ -0,0 +1,225 @@
+/*
+ *  Advanced Linux Sound Architecture
+ *
+ *  GF1 (GUS) Patch Instrument Format
+ *  Copyright (c) 1994-99 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_AINSTR_GF1_H
+#define __SOUND_AINSTR_GF1_H
+
+#ifndef __KERNEL__
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#endif
+
+/*
+ *  share types (share ID 1)
+ */
+
+#define GF1_SHARE_FILE			0
+
+/*
+ *  wave formats
+ */
+
+#define GF1_WAVE_16BIT			0x0001  /* 16-bit wave */
+#define GF1_WAVE_UNSIGNED		0x0002  /* unsigned wave */
+#define GF1_WAVE_INVERT			0x0002  /* same as unsigned wave */
+#define GF1_WAVE_BACKWARD		0x0004  /* backward mode (maybe used for reverb or ping-ping loop) */
+#define GF1_WAVE_LOOP			0x0008  /* loop mode */
+#define GF1_WAVE_BIDIR			0x0010  /* bidirectional mode */
+#define GF1_WAVE_STEREO			0x0100	/* stereo mode */
+#define GF1_WAVE_ULAW			0x0200	/* uLaw compression mode */
+
+/*
+ *  Wavetable definitions
+ */
+
+typedef struct gf1_wave {
+	unsigned int share_id[4];	/* share id - zero = no sharing */
+	unsigned int format;		/* wave format */
+
+	struct {
+		unsigned int number;	/* some other ID for this instrument */
+		unsigned int memory;	/* begin of waveform in onboard memory */
+		unsigned char *ptr;	/* pointer to waveform in system memory */
+	} address;
+
+	unsigned int size;		/* size of waveform in samples */
+	unsigned int start;		/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_start;	/* bits loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_end;		/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned short loop_repeat;	/* loop repeat - 0 = forever */
+
+	unsigned char flags;		/* GF1 patch flags */
+	unsigned char pad;
+	unsigned int sample_rate;	/* sample rate in Hz */
+	unsigned int low_frequency;	/* low frequency range */
+	unsigned int high_frequency;	/* high frequency range */
+	unsigned int root_frequency;	/* root frequency range */
+	signed short tune;
+	unsigned char balance;
+	unsigned char envelope_rate[6];
+	unsigned char envelope_offset[6];
+	unsigned char tremolo_sweep;
+	unsigned char tremolo_rate;
+	unsigned char tremolo_depth;
+	unsigned char vibrato_sweep;
+	unsigned char vibrato_rate;
+	unsigned char vibrato_depth;
+	unsigned short scale_frequency;
+	unsigned short scale_factor;	/* 0-2048 or 0-2 */
+  
+	struct gf1_wave *next;
+} gf1_wave_t;
+
+/*
+ *  Instrument
+ */
+
+#define IWFFFF_EXCLUDE_NONE		0x0000	/* exclusion mode - none */
+#define IWFFFF_EXCLUDE_SINGLE		0x0001	/* exclude single - single note from the instrument group */
+#define IWFFFF_EXCLUDE_MULTIPLE		0x0002	/* exclude multiple - stop only same note from this instrument */
+
+#define IWFFFF_EFFECT_NONE		0
+#define IWFFFF_EFFECT_REVERB		1
+#define IWFFFF_EFFECT_CHORUS		2
+#define IWFFFF_EFFECT_ECHO		3
+
+typedef struct {
+	unsigned short exclusion;
+	unsigned short exclusion_group;	/* 0 - none, 1-65535 */
+
+	unsigned char effect1;		/* effect 1 */
+	unsigned char effect1_depth;	/* 0-127 */
+	unsigned char effect2;		/* effect 2 */
+	unsigned char effect2_depth;	/* 0-127 */
+
+	gf1_wave_t *wave;		/* first waveform */
+} gf1_instrument_t;
+
+/*
+ *
+ *    Kernel <-> user space
+ *    Hardware (CPU) independent section
+ *
+ *    * = zero or more
+ *    + = one or more
+ *
+ *    gf1_xinstrument		IWFFFF_STRU_INSTR
+ *      +gf1_xwave		IWFFFF_STRU_WAVE
+ *
+ */
+
+#define GF1_STRU_WAVE		__cpu_to_be32(('W'<<24)|('A'<<16)|('V'<<8)|'E')
+#define GF1_STRU_INSTR		__cpu_to_be32(('I'<<24)|('N'<<16)|('S'<<8)|'T')
+
+/*
+ *  Wavetable definitions
+ */
+
+typedef struct gf1_xwave {
+	__u32 stype;			/* structure type */
+
+	__u32 share_id[4];		/* share id - zero = no sharing */
+	__u32 format;			/* wave format */
+
+	__u32 size;			/* size of waveform in samples */
+	__u32 start;			/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_start;		/* bits loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_end;			/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u16 loop_repeat;		/* loop repeat - 0 = forever */
+
+	__u8 flags;			/* GF1 patch flags */
+	__u8 pad;
+	__u32 sample_rate;		/* sample rate in Hz */
+	__u32 low_frequency;		/* low frequency range */
+	__u32 high_frequency;		/* high frequency range */
+	__u32 root_frequency;		/* root frequency range */
+	__s16 tune;
+	__u8 balance;
+	__u8 envelope_rate[6];
+	__u8 envelope_offset[6];
+	__u8 tremolo_sweep;
+	__u8 tremolo_rate;
+	__u8 tremolo_depth;
+	__u8 vibrato_sweep;
+	__u8 vibrato_rate;
+	__u8 vibrato_depth;
+	__u16 scale_frequency;
+	__u16 scale_factor;		/* 0-2048 or 0-2 */  
+} gf1_xwave_t;
+
+/*
+ *  Instrument
+ */
+
+typedef struct gf1_xinstrument {
+	__u32 stype;
+	
+	__u16 exclusion;
+	__u16 exclusion_group;		/* 0 - none, 1-65535 */
+
+	__u8 effect1;			/* effect 1 */
+	__u8 effect1_depth;		/* 0-127 */
+	__u8 effect2;			/* effect 2 */
+	__u8 effect2_depth;		/* 0-127 */
+} gf1_xinstrument_t;
+
+/*
+ *  Instrument info
+ */
+
+#define GF1_INFO_ENVELOPE		(1<<0)
+#define GF1_INFO_TREMOLO		(1<<1)
+#define GF1_INFO_VIBRATO		(1<<2)
+
+typedef struct gf1_info {
+	unsigned char flags;		/* supported wave flags */
+	unsigned char pad[3];
+	unsigned int features;		/* supported features */
+	unsigned int max8_len;		/* maximum 8-bit wave length */
+	unsigned int max16_len;		/* maximum 16-bit wave length */
+} gf1_info_t;
+
+#ifdef __KERNEL__
+
+#include "seq_instr.h"
+
+typedef struct {
+	void *private_data;
+	int (*info)(void *private_data, gf1_info_t *info);
+	int (*put_sample)(void *private_data, gf1_wave_t *wave,
+	                  char __user *data, long len, int atomic);
+	int (*get_sample)(void *private_data, gf1_wave_t *wave,
+			  char __user *data, long len, int atomic);
+	int (*remove_sample)(void *private_data, gf1_wave_t *wave,
+			     int atomic);
+	void (*notify)(void *private_data, snd_seq_kinstr_t *instr, int what);
+	snd_seq_kinstr_ops_t kops;
+} snd_gf1_ops_t;
+
+int snd_seq_gf1_init(snd_gf1_ops_t *ops,
+		     void *private_data,
+		     snd_seq_kinstr_ops_t *next);
+
+#endif
+
+#endif /* __SOUND_AINSTR_GF1_H */
diff --git a/include/sound/ainstr_iw.h b/include/sound/ainstr_iw.h
new file mode 100644
index 000000000000..8adf744926ff
--- /dev/null
+++ b/include/sound/ainstr_iw.h
@@ -0,0 +1,373 @@
+/*
+ *  Advanced Linux Sound Architecture
+ *
+ *  InterWave FFFF Instrument Format
+ *  Copyright (c) 1994-99 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_AINSTR_IW_H
+#define __SOUND_AINSTR_IW_H
+
+#ifndef __KERNEL__
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#endif
+
+/*
+ *  share types (share ID 1)
+ */
+
+#define IWFFFF_SHARE_FILE		0
+
+/*
+ *  wave formats
+ */
+
+#define IWFFFF_WAVE_16BIT		0x0001  /* 16-bit wave */
+#define IWFFFF_WAVE_UNSIGNED		0x0002  /* unsigned wave */
+#define IWFFFF_WAVE_INVERT		0x0002  /* same as unsigned wave */
+#define IWFFFF_WAVE_BACKWARD		0x0004  /* backward mode (maybe used for reverb or ping-ping loop) */
+#define IWFFFF_WAVE_LOOP		0x0008  /* loop mode */
+#define IWFFFF_WAVE_BIDIR		0x0010  /* bidirectional mode */
+#define IWFFFF_WAVE_ULAW		0x0020  /* uLaw compressed wave */
+#define IWFFFF_WAVE_RAM			0x0040  /* wave is _preloaded_ in RAM (it is used for ROM simulation) */
+#define IWFFFF_WAVE_ROM			0x0080  /* wave is in ROM */
+#define IWFFFF_WAVE_STEREO		0x0100	/* wave is stereo */
+
+/*
+ *  Wavetable definitions
+ */
+
+typedef struct iwffff_wave {
+	unsigned int share_id[4];	/* share id - zero = no sharing */
+	unsigned int format;		/* wave format */
+
+	struct {
+		unsigned int number;	/* some other ID for this wave */
+		unsigned int memory;	/* begin of waveform in onboard memory */
+		unsigned char *ptr;	/* pointer to waveform in system memory */
+	} address;
+
+	unsigned int size;		/* size of waveform in samples */
+	unsigned int start;		/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_start;	/* bits loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_end;		/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned short loop_repeat;	/* loop repeat - 0 = forever */
+	unsigned int sample_ratio;	/* sample ratio (44100 * 1024 / rate) */
+	unsigned char attenuation;	/* 0 - 127 (no corresponding midi controller) */
+	unsigned char low_note;		/* lower frequency range for this waveform */
+	unsigned char high_note;	/* higher frequency range for this waveform */
+	unsigned char pad;
+  
+	struct iwffff_wave *next;
+} iwffff_wave_t;
+
+/*
+ *  Layer
+ */
+
+#define IWFFFF_LFO_SHAPE_TRIANGLE	0
+#define IWFFFF_LFO_SHAPE_POSTRIANGLE	1
+
+typedef struct iwffff_lfo {
+	unsigned short freq;		/* (0-2047) 0.01Hz - 21.5Hz */
+	signed short depth;		/* volume +- (0-255) 0.48675dB/step */
+	signed short sweep;		/* 0 - 950 deciseconds */
+	unsigned char shape;		/* see to IWFFFF_LFO_SHAPE_XXXX */
+	unsigned char delay;		/* 0 - 255 deciseconds */
+} iwffff_lfo_t;
+
+#define IWFFFF_ENV_FLAG_RETRIGGER	0x0001	/* flag - retrigger */
+
+#define IWFFFF_ENV_MODE_ONE_SHOT	0x0001	/* mode - one shot */
+#define IWFFFF_ENV_MODE_SUSTAIN		0x0002	/* mode - sustain */
+#define IWFFFF_ENV_MODE_NO_SUSTAIN	0x0003	/* mode - no sustain */
+
+#define IWFFFF_ENV_INDEX_VELOCITY	0x0001	/* index - velocity */
+#define IWFFFF_ENV_INDEX_FREQUENCY	0x0002	/* index - frequency */
+
+typedef struct iwffff_env_point {
+	unsigned short offset;
+	unsigned short rate;
+} iwffff_env_point_t;
+
+typedef struct iwffff_env_record {
+	unsigned short nattack;
+	unsigned short nrelease;
+	unsigned short sustain_offset;
+	unsigned short sustain_rate;
+	unsigned short release_rate;
+	unsigned char hirange;
+	unsigned char pad;
+	struct iwffff_env_record *next;
+	/* points are stored here */
+	/* count of points = nattack + nrelease */
+} iwffff_env_record_t;
+
+typedef struct iwffff_env {
+	unsigned char flags;
+  	unsigned char mode;
+  	unsigned char index;
+	unsigned char pad;
+	struct iwffff_env_record *record;
+} iwffff_env_t;
+
+#define IWFFFF_LAYER_FLAG_RETRIGGER	0x0001	/* retrigger */
+
+#define IWFFFF_LAYER_VELOCITY_TIME	0x0000	/* velocity mode = time */
+#define IWFFFF_LAYER_VELOCITY_RATE	0x0001	/* velocity mode = rate */
+
+#define IWFFFF_LAYER_EVENT_KUP		0x0000	/* layer event - key up */
+#define IWFFFF_LAYER_EVENT_KDOWN	0x0001	/* layer event - key down */
+#define IWFFFF_LAYER_EVENT_RETRIG	0x0002	/* layer event - retrigger */
+#define IWFFFF_LAYER_EVENT_LEGATO	0x0003	/* layer event - legato */
+
+typedef struct iwffff_layer {
+	unsigned char flags;
+	unsigned char velocity_mode;
+      	unsigned char layer_event;
+	unsigned char low_range;	/* range for layer based */
+	unsigned char high_range;	/* on either velocity or frequency */
+	unsigned char pan;		/* pan offset from CC1 (0 left - 127 right) */
+	unsigned char pan_freq_scale;	/* position based on frequency (0-127) */
+	unsigned char attenuation;	/* 0-127 (no corresponding midi controller) */
+	iwffff_lfo_t tremolo;		/* tremolo effect */
+	iwffff_lfo_t vibrato;		/* vibrato effect */
+	unsigned short freq_scale;	/* 0-2048, 1024 is equal to semitone scaling */
+	unsigned char freq_center;	/* center for keyboard frequency scaling */
+	unsigned char pad;
+	iwffff_env_t penv;		/* pitch envelope */
+	iwffff_env_t venv;		/* volume envelope */
+
+	iwffff_wave_t *wave;
+	struct iwffff_layer *next;
+} iwffff_layer_t;
+
+/*
+ *  Instrument
+ */
+
+#define IWFFFF_EXCLUDE_NONE		0x0000	/* exclusion mode - none */
+#define IWFFFF_EXCLUDE_SINGLE		0x0001	/* exclude single - single note from the instrument group */
+#define IWFFFF_EXCLUDE_MULTIPLE		0x0002	/* exclude multiple - stop only same note from this instrument */
+
+#define IWFFFF_LAYER_NONE		0x0000	/* not layered */
+#define IWFFFF_LAYER_ON			0x0001	/* layered */
+#define IWFFFF_LAYER_VELOCITY		0x0002	/* layered by velocity */
+#define IWFFFF_LAYER_FREQUENCY		0x0003	/* layered by frequency */
+
+#define IWFFFF_EFFECT_NONE		0
+#define IWFFFF_EFFECT_REVERB		1
+#define IWFFFF_EFFECT_CHORUS		2
+#define IWFFFF_EFFECT_ECHO		3
+
+typedef struct {
+	unsigned short exclusion;
+	unsigned short layer_type;
+	unsigned short exclusion_group;	/* 0 - none, 1-65535 */
+
+	unsigned char effect1;		/* effect 1 */
+	unsigned char effect1_depth;	/* 0-127 */
+	unsigned char effect2;		/* effect 2 */
+	unsigned char effect2_depth;	/* 0-127 */
+
+	iwffff_layer_t *layer;		/* first layer */
+} iwffff_instrument_t;
+
+/*
+ *
+ *    Kernel <-> user space
+ *    Hardware (CPU) independent section
+ *
+ *    * = zero or more
+ *    + = one or more
+ *
+ *    iwffff_xinstrument		IWFFFF_STRU_INSTR
+ *      +iwffff_xlayer			IWFFFF_STRU_LAYER
+ *        *iwffff_xenv_record		IWFFFF_STRU_ENV_RECT (tremolo)
+ *        *iwffff_xenv_record		IWFFFF_STRU_EVN_RECT (vibrato)
+ *          +iwffff_xwave		IWFFFF_STRU_WAVE
+ *
+ */
+
+#define IWFFFF_STRU_WAVE	__cpu_to_be32(('W'<<24)|('A'<<16)|('V'<<8)|'E')
+#define IWFFFF_STRU_ENV_RECP	__cpu_to_be32(('E'<<24)|('N'<<16)|('R'<<8)|'P')
+#define IWFFFF_STRU_ENV_RECV	__cpu_to_be32(('E'<<24)|('N'<<16)|('R'<<8)|'V')
+#define IWFFFF_STRU_LAYER 	__cpu_to_be32(('L'<<24)|('A'<<16)|('Y'<<8)|'R')
+#define IWFFFF_STRU_INSTR 	__cpu_to_be32(('I'<<24)|('N'<<16)|('S'<<8)|'T')
+
+/*
+ *  Wavetable definitions
+ */
+
+typedef struct iwffff_xwave {
+	__u32 stype;			/* structure type */
+
+	__u32 share_id[4];		/* share id - zero = no sharing */
+
+	__u32 format;			/* wave format */
+	__u32 offset;			/* offset to ROM (address) */
+
+	__u32 size;			/* size of waveform in samples */
+	__u32 start;			/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_start;		/* bits loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_end;			/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u16 loop_repeat;		/* loop repeat - 0 = forever */
+	__u32 sample_ratio;		/* sample ratio (44100 * 1024 / rate) */
+	__u8 attenuation;		/* 0 - 127 (no corresponding midi controller) */
+	__u8 low_note;			/* lower frequency range for this waveform */
+	__u8 high_note;			/* higher frequency range for this waveform */
+	__u8 pad;
+} iwffff_xwave_t;
+
+/*
+ *  Layer
+ */
+
+typedef struct iwffff_xlfo {
+	__u16 freq;			/* (0-2047) 0.01Hz - 21.5Hz */
+	__s16 depth;			/* volume +- (0-255) 0.48675dB/step */
+	__s16 sweep;			/* 0 - 950 deciseconds */
+	__u8 shape;			/* see to ULTRA_IW_LFO_SHAPE_XXXX */
+	__u8 delay;			/* 0 - 255 deciseconds */
+} iwffff_xlfo_t;
+
+typedef struct iwffff_xenv_point {
+	__u16 offset;
+	__u16 rate;
+} iwffff_xenv_point_t;
+
+typedef struct iwffff_xenv_record {
+	__u32 stype;
+	__u16 nattack;
+	__u16 nrelease;
+	__u16 sustain_offset;
+	__u16 sustain_rate;
+	__u16 release_rate;
+	__u8 hirange;
+	__u8 pad;
+	/* points are stored here.. */
+	/* count of points = nattack + nrelease */
+} iwffff_xenv_record_t;
+
+typedef struct iwffff_xenv {
+	__u8 flags;
+  	__u8 mode;
+  	__u8 index;
+	__u8 pad;
+} iwffff_xenv_t;
+
+typedef struct iwffff_xlayer {
+	__u32 stype;
+	__u8 flags;
+	__u8 velocity_mode;
+      	__u8 layer_event;
+	__u8 low_range;			/* range for layer based */
+	__u8 high_range;		/* on either velocity or frequency */
+	__u8 pan;			/* pan offset from CC1 (0 left - 127 right) */
+	__u8 pan_freq_scale;		/* position based on frequency (0-127) */
+	__u8 attenuation;		/* 0-127 (no corresponding midi controller) */
+	iwffff_xlfo_t tremolo;		/* tremolo effect */
+	iwffff_xlfo_t vibrato;		/* vibrato effect */
+	__u16 freq_scale;		/* 0-2048, 1024 is equal to semitone scaling */
+	__u8 freq_center;		/* center for keyboard frequency scaling */
+	__u8 pad;
+	iwffff_xenv_t penv;		/* pitch envelope */
+	iwffff_xenv_t venv;		/* volume envelope */
+} iwffff_xlayer_t;
+
+/*
+ *  Instrument
+ */
+
+typedef struct iwffff_xinstrument {
+	__u32 stype;
+	
+	__u16 exclusion;
+	__u16 layer_type;
+	__u16 exclusion_group;		/* 0 - none, 1-65535 */
+
+	__u8 effect1;			/* effect 1 */
+	__u8 effect1_depth;		/* 0-127 */
+	__u8 effect2;			/* effect 2 */
+	__u8 effect2_depth;		/* 0-127 */
+} iwffff_xinstrument_t;
+
+/*
+ *  ROM support
+ *    InterWave ROMs are Little-Endian (x86)
+ */
+
+#define IWFFFF_ROM_HDR_SIZE	512
+
+typedef struct {
+	__u8 iwave[8];
+	__u8 revision;
+	__u8 series_number;
+	__u8 series_name[16];
+	__u8 date[10];
+	__u16 vendor_revision_major;
+	__u16 vendor_revision_minor;
+	__u32 rom_size;
+	__u8 copyright[128];
+	__u8 vendor_name[64];
+	__u8 description[128];
+} iwffff_rom_header_t;
+
+/*
+ *  Instrument info
+ */
+
+#define IWFFFF_INFO_LFO_VIBRATO		(1<<0)
+#define IWFFFF_INFO_LFO_VIBRATO_SHAPE	(1<<1)
+#define IWFFFF_INFO_LFO_TREMOLO		(1<<2)
+#define IWFFFF_INFO_LFO_TREMOLO_SHAPE	(1<<3)
+
+typedef struct iwffff_info {
+	unsigned int format;		/* supported format bits */
+	unsigned int effects;		/* supported effects (1 << IWFFFF_EFFECT*) */
+	unsigned int lfos;		/* LFO effects */
+	unsigned int max8_len;		/* maximum 8-bit wave length */
+	unsigned int max16_len;		/* maximum 16-bit wave length */
+} iwffff_info_t;
+
+#ifdef __KERNEL__
+
+#include "seq_instr.h"
+
+typedef struct {
+	void *private_data;
+	int (*info)(void *private_data, iwffff_info_t *info);
+	int (*put_sample)(void *private_data, iwffff_wave_t *wave,
+	                  char __user *data, long len, int atomic);
+	int (*get_sample)(void *private_data, iwffff_wave_t *wave,
+			  char __user *data, long len, int atomic);
+	int (*remove_sample)(void *private_data, iwffff_wave_t *wave,
+			     int atomic);
+	void (*notify)(void *private_data, snd_seq_kinstr_t *instr, int what);
+	snd_seq_kinstr_ops_t kops;
+} snd_iwffff_ops_t;
+
+int snd_seq_iwffff_init(snd_iwffff_ops_t *ops,
+			void *private_data,
+                        snd_seq_kinstr_ops_t *next);
+
+#endif
+
+#endif /* __SOUND_AINSTR_IW_H */
diff --git a/include/sound/ainstr_simple.h b/include/sound/ainstr_simple.h
new file mode 100644
index 000000000000..40824b4ab23d
--- /dev/null
+++ b/include/sound/ainstr_simple.h
@@ -0,0 +1,156 @@
+/*
+ *  Advanced Linux Sound Architecture
+ *
+ *  Simple (MOD player) Instrument Format
+ *  Copyright (c) 1994-99 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_AINSTR_SIMPLE_H
+#define __SOUND_AINSTR_SIMPLE_H
+
+#ifndef __KERNEL__
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#endif
+
+/*
+ *  share types (share ID 1)
+ */
+
+#define SIMPLE_SHARE_FILE		0
+
+/*
+ *  wave formats
+ */
+
+#define SIMPLE_WAVE_16BIT		0x0001  /* 16-bit wave */
+#define SIMPLE_WAVE_UNSIGNED		0x0002  /* unsigned wave */
+#define SIMPLE_WAVE_INVERT		0x0002  /* same as unsigned wave */
+#define SIMPLE_WAVE_BACKWARD		0x0004  /* backward mode (maybe used for reverb or ping-ping loop) */
+#define SIMPLE_WAVE_LOOP		0x0008  /* loop mode */
+#define SIMPLE_WAVE_BIDIR		0x0010  /* bidirectional mode */
+#define SIMPLE_WAVE_STEREO		0x0100	/* stereo wave */
+#define SIMPLE_WAVE_ULAW		0x0200	/* uLaw compression mode */
+
+/*
+ *  instrument effects
+ */
+
+#define SIMPLE_EFFECT_NONE		0
+#define SIMPLE_EFFECT_REVERB		1
+#define SIMPLE_EFFECT_CHORUS		2
+#define SIMPLE_EFFECT_ECHO		3
+
+/*
+ *  instrument info
+ */
+
+typedef struct simple_instrument_info {
+	unsigned int format;		/* supported format bits */
+	unsigned int effects;		/* supported effects (1 << SIMPLE_EFFECT_*) */
+	unsigned int max8_len;		/* maximum 8-bit wave length */
+	unsigned int max16_len;		/* maximum 16-bit wave length */
+} simple_instrument_info_t;
+
+/*
+ *  Instrument
+ */
+
+typedef struct {
+	unsigned int share_id[4];	/* share id - zero = no sharing */
+	unsigned int format;		/* wave format */
+
+	struct {
+		unsigned int number;	/* some other ID for this instrument */
+		unsigned int memory;	/* begin of waveform in onboard memory */
+		unsigned char *ptr;	/* pointer to waveform in system memory */
+	} address;
+
+	unsigned int size;		/* size of waveform in samples */
+	unsigned int start;		/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_start;	/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned int loop_end;		/* loop end offset in samples * 16 (lowest 4 bits - fraction) */
+	unsigned short loop_repeat;	/* loop repeat - 0 = forever */
+
+	unsigned char effect1;		/* effect 1 */
+	unsigned char effect1_depth;	/* 0-127 */
+	unsigned char effect2;		/* effect 2 */
+	unsigned char effect2_depth;	/* 0-127 */
+} simple_instrument_t;
+
+/*
+ *
+ *    Kernel <-> user space
+ *    Hardware (CPU) independent section
+ *
+ *    * = zero or more
+ *    + = one or more
+ *
+ *    simple_xinstrument	SIMPLE_STRU_INSTR
+ *
+ */
+
+#define SIMPLE_STRU_INSTR	__cpu_to_be32(('I'<<24)|('N'<<16)|('S'<<8)|'T')
+
+/*
+ *  Instrument
+ */
+
+typedef struct simple_xinstrument {
+	__u32 stype;
+
+	__u32 share_id[4];		/* share id - zero = no sharing */
+	__u32 format;			/* wave format */
+
+	__u32 size;			/* size of waveform in samples */
+	__u32 start;			/* start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_start;		/* bits loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u32 loop_end;			/* loop start offset in samples * 16 (lowest 4 bits - fraction) */
+	__u16 loop_repeat;		/* loop repeat - 0 = forever */
+	
+	__u8 effect1;			/* effect 1 */
+	__u8 effect1_depth;		/* 0-127 */
+	__u8 effect2;			/* effect 2 */
+	__u8 effect2_depth;		/* 0-127 */
+} simple_xinstrument_t;
+
+#ifdef __KERNEL__
+
+#include "seq_instr.h"
+
+typedef struct {
+	void *private_data;
+	int (*info)(void *private_data, simple_instrument_info_t *info);
+	int (*put_sample)(void *private_data, simple_instrument_t *instr,
+	                  char __user *data, long len, int atomic);
+	int (*get_sample)(void *private_data, simple_instrument_t *instr,
+			  char __user *data, long len, int atomic);
+	int (*remove_sample)(void *private_data, simple_instrument_t *instr,
+			     int atomic);
+	void (*notify)(void *private_data, snd_seq_kinstr_t *instr, int what);
+	snd_seq_kinstr_ops_t kops;
+} snd_simple_ops_t;
+
+int snd_seq_simple_init(snd_simple_ops_t *ops,
+			void *private_data,
+			snd_seq_kinstr_ops_t *next);
+
+#endif
+
+#endif /* __SOUND_AINSTR_SIMPLE_H */
diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h
new file mode 100644
index 000000000000..f3f2c3e5ae51
--- /dev/null
+++ b/include/sound/ak4114.h
@@ -0,0 +1,205 @@
+#ifndef __SOUND_AK4114_H
+#define __SOUND_AK4114_H
+
+/*
+ *  Routines for Asahi Kasei AK4114
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* AK4114 registers */
+#define AK4114_REG_PWRDN	0x00	/* power down */
+#define AK4114_REG_FORMAT	0x01	/* format control */
+#define AK4114_REG_IO0		0x02	/* input/output control */
+#define AK4114_REG_IO1		0x03	/* input/output control */
+#define AK4114_REG_INT0_MASK	0x04	/* interrupt0 mask */
+#define AK4114_REG_INT1_MASK	0x05	/* interrupt1 mask */
+#define AK4114_REG_RCS0		0x06	/* receiver status 0 */
+#define AK4114_REG_RCS1		0x07	/* receiver status 1 */
+#define AK4114_REG_RXCSB0	0x08	/* RX channel status byte 0 */
+#define AK4114_REG_RXCSB1	0x09	/* RX channel status byte 1 */
+#define AK4114_REG_RXCSB2	0x0a	/* RX channel status byte 2 */
+#define AK4114_REG_RXCSB3	0x0b	/* RX channel status byte 3 */
+#define AK4114_REG_RXCSB4	0x0c	/* RX channel status byte 4 */
+#define AK4114_REG_TXCSB0	0x0d	/* TX channel status byte 0 */
+#define AK4114_REG_TXCSB1	0x0e	/* TX channel status byte 1 */
+#define AK4114_REG_TXCSB2	0x0f	/* TX channel status byte 2 */
+#define AK4114_REG_TXCSB3	0x10	/* TX channel status byte 3 */
+#define AK4114_REG_TXCSB4	0x11	/* TX channel status byte 4 */
+#define AK4114_REG_Pc0		0x12	/* burst preamble Pc byte 0 */
+#define AK4114_REG_Pc1		0x13	/* burst preamble Pc byte 1 */
+#define AK4114_REG_Pd0		0x14	/* burst preamble Pd byte 0 */
+#define AK4114_REG_Pd1		0x15	/* burst preamble Pd byte 1 */
+#define AK4114_REG_QSUB_ADDR	0x16	/* Q-subcode address + control */
+#define AK4114_REG_QSUB_TRACK	0x17	/* Q-subcode track */
+#define AK4114_REG_QSUB_INDEX	0x18	/* Q-subcode index */
+#define AK4114_REG_QSUB_MINUTE	0x19	/* Q-subcode minute */
+#define AK4114_REG_QSUB_SECOND	0x1a	/* Q-subcode second */
+#define AK4114_REG_QSUB_FRAME	0x1b	/* Q-subcode frame */
+#define AK4114_REG_QSUB_ZERO	0x1c	/* Q-subcode zero */
+#define AK4114_REG_QSUB_ABSMIN	0x1d	/* Q-subcode absolute minute */
+#define AK4114_REG_QSUB_ABSSEC	0x1e	/* Q-subcode absolute second */
+#define AK4114_REG_QSUB_ABSFRM	0x1f	/* Q-subcode absolute frame */
+
+/* sizes */
+#define AK4114_REG_RXCSB_SIZE	((AK4114_REG_RXCSB4-AK4114_REG_RXCSB0)+1)
+#define AK4114_REG_TXCSB_SIZE	((AK4114_REG_TXCSB4-AK4114_REG_TXCSB0)+1)
+#define AK4114_REG_QSUB_SIZE	((AK4114_REG_QSUB_ABSFRM-AK4114_REG_QSUB_ADDR)+1)
+
+/* AK4117_REG_PWRDN bits */
+#define AK4114_CS12		(1<<7)	/* Channel Status Select */
+#define AK4114_BCU		(1<<6)	/* Block Start & C/U Output Mode */
+#define AK4114_CM1		(1<<5)	/* Master Clock Operation Select */
+#define AK4114_CM0		(1<<4)	/* Master Clock Operation Select */
+#define AK4114_OCKS1		(1<<3)	/* Master Clock Frequency Select */
+#define AK4114_OCKS0		(1<<2)	/* Master Clock Frequency Select */
+#define AK4114_PWN		(1<<1)	/* 0 = power down, 1 = normal operation */
+#define AK4114_RST		(1<<0)	/* 0 = reset & initialize (except this register), 1 = normal operation */
+
+/* AK4114_REQ_FORMAT bits */
+#define AK4114_MONO		(1<<7)	/* Double Sampling Frequency Mode: 0 = stereo, 1 = mono */
+#define AK4114_DIF2		(1<<5)	/* Audio Data Control */
+#define AK4114_DIF1		(1<<5)	/* Audio Data Control */
+#define AK4114_DIF0		(1<<4)	/* Audio Data Control */
+#define AK4114_DIF_16R		(0)				/* STDO: 16-bit, right justified */
+#define AK4114_DIF_18R		(AK4114_DIF0)			/* STDO: 18-bit, right justified */
+#define AK4114_DIF_20R		(AK4114_DIF1)			/* STDO: 20-bit, right justified */
+#define AK4114_DIF_24R		(AK4114_DIF1|AK4114_DIF0)	/* STDO: 24-bit, right justified */
+#define AK4114_DIF_24L		(AK4114_DIF2)			/* STDO: 24-bit, left justified */
+#define AK4114_DIF_24I2S	(AK4114_DIF2|AK4114_DIF0)	/* STDO: I2S */
+#define AK4114_DIF_I24L		(AK4114_DIF2|AK4114_DIF1)	/* STDO: 24-bit, left justified; LRCLK, BICK = Input */
+#define AK4114_DIF_I24I2S	(AK4114_DIF2|AK4114_DIF1|AK4114_DIF0) /* STDO: I2S;  LRCLK, BICK = Input */
+#define AK4114_DEAU		(1<<3)	/* Deemphasis Autodetect Enable (1 = enable) */
+#define AK4114_DEM1		(1<<2)	/* 32kHz-48kHz Deemphasis Control */
+#define AK4114_DEM0		(1<<1)	/* 32kHz-48kHz Deemphasis Control */
+#define AK4114_DEM_44KHZ	(0)
+#define AK4114_DEM_48KHZ	(AK4114_DEM1)
+#define AK4114_DEM_32KHZ	(AK4114_DEM0|AK4114_DEM1)
+#define AK4114_DEM_96KHZ	(AK4114_DEM1)	/* DFS must be set */
+#define AK4114_DFS		(1<<0)	/* 96kHz Deemphasis Control */
+
+/* AK4114_REG_IO0 */
+#define AK4114_TX1E		(1<<7)	/* TX1 Output Enable (1 = enable) */
+#define AK4114_OPS12		(1<<2)	/* Output Though Data Selector for TX1 pin */
+#define AK4114_OPS11		(1<<1)	/* Output Though Data Selector for TX1 pin */
+#define AK4114_OPS10		(1<<0)	/* Output Though Data Selector for TX1 pin */
+#define AK4114_TX0E		(1<<3)	/* TX0 Output Enable (1 = enable) */
+#define AK4114_OPS02		(1<<2)	/* Output Though Data Selector for TX0 pin */
+#define AK4114_OPS01		(1<<1)	/* Output Though Data Selector for TX0 pin */
+#define AK4114_OPS00		(1<<0)	/* Output Though Data Selector for TX0 pin */
+
+/* AK4114_REG_IO1 */
+#define AK4114_EFH1		(1<<7)	/* Interrupt 0 pin Hold */
+#define AK4114_EFH0		(1<<6)	/* Interrupt 0 pin Hold */
+#define AK4114_EFH_512		(0)
+#define AK4114_EFH_1024		(AK4114_EFH0)
+#define AK4114_EFH_2048		(AK4114_EFH1)
+#define AK4114_EFH_4096		(AK4114_EFH1|AK4114_EFH0)
+#define AK4114_UDIT		(1<<5)	/* U-bit Control for DIT (0 = fixed '0', 1 = recovered) */
+#define AK4114_TLR		(1<<4)	/* Double Sampling Frequency Select for DIT (0 = L channel, 1 = R channel) */
+#define AK4114_DIT		(1<<3)	/* TX1 out: 0 = Through Data (RX data), 1 = Transmit Data (DAUX data) */
+#define AK4114_IPS2		(1<<2)	/* Input Recovery Data Select */
+#define AK4114_IPS1		(1<<1)	/* Input Recovery Data Select */
+#define AK4114_IPS0		(1<<0)	/* Input Recovery Data Select */
+#define AK4114_IPS(x)		((x)&7)
+
+/* AK4114_REG_INT0_MASK && AK4114_REG_INT1_MASK*/
+#define AK4117_MQI              (1<<7)  /* mask enable for QINT bit */
+#define AK4117_MAT              (1<<6)  /* mask enable for AUTO bit */
+#define AK4117_MCI              (1<<5)  /* mask enable for CINT bit */
+#define AK4117_MUL              (1<<4)  /* mask enable for UNLOCK bit */
+#define AK4117_MDTS             (1<<3)  /* mask enable for DTSCD bit */
+#define AK4117_MPE              (1<<2)  /* mask enable for PEM bit */
+#define AK4117_MAN              (1<<1)  /* mask enable for AUDN bit */
+#define AK4117_MPR              (1<<0)  /* mask enable for PAR bit */
+
+/* AK4114_REG_RCS0 */
+#define AK4114_QINT		(1<<7)	/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+#define AK4114_AUTO		(1<<6)	/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4114_CINT		(1<<5)	/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4114_UNLCK		(1<<4)	/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4114_DTSCD		(1<<3)	/* DTS-CD Detect, 0 = No detect, 1 = Detect */
+#define AK4114_PEM		(1<<2)	/* Pre-emphasis Detect, 0 = OFF, 1 = ON */
+#define AK4114_AUDION		(1<<1)	/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4114_PAR		(1<<0)	/* parity error or biphase error status, 0 = no error, 1 = error */
+
+/* AK4114_REG_RCS1 */
+#define AK4114_FS3		(1<<7)	/* sampling frequency detection */
+#define AK4114_FS2		(1<<6)
+#define AK4114_FS1		(1<<5)
+#define AK4114_FS0		(1<<4)
+#define AK4114_FS_44100HZ	(0)
+#define AK4114_FS_48000HZ	(AK4114_FS1)
+#define AK4114_FS_32000HZ	(AK4114_FS1|AK4114_FS0)
+#define AK4114_FS_88200HZ	(AK4114_FS3)
+#define AK4114_FS_96000HZ	(AK4114_FS3|AK4114_FS1)
+#define AK4114_FS_176400HZ	(AK4114_FS3|AK4114_FS2)
+#define AK4114_FS_192000HZ	(AK4114_FS3|AK4114_FS2|AK4114_FS1)
+#define AK4114_V		(1<<3)	/* Validity of Channel Status, 0 = Valid, 1 = Invalid */
+#define AK4114_QCRC		(1<<1)	/* CRC for Q-subcode, 0 = no error, 1 = error */
+#define AK4114_CCRC		(1<<0)	/* CRC for channel status, 0 = no error, 1 = error */
+
+/* flags for snd_ak4114_check_rate_and_errors() */
+#define AK4114_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4114_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4114_CONTROLS		14
+
+typedef void (ak4114_write_t)(void *private_data, unsigned char addr, unsigned char data);
+typedef unsigned char (ak4114_read_t)(void *private_data, unsigned char addr);
+
+typedef struct ak4114 ak4114_t;
+
+struct ak4114 {
+	snd_card_t * card;
+	ak4114_write_t * write;
+	ak4114_read_t * read;
+	void * private_data;
+	unsigned int init: 1;
+	spinlock_t lock;
+	unsigned char regmap[7];
+	unsigned char txcsb[5];
+	snd_kcontrol_t *kctls[AK4114_CONTROLS];
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	struct workqueue_struct *workqueue;
+	struct work_struct work;
+	void *change_callback_private;
+	void (*change_callback)(ak4114_t *ak4114, unsigned char c0, unsigned char c1);
+};
+
+int snd_ak4114_create(snd_card_t *card,
+		      ak4114_read_t *read, ak4114_write_t *write,
+		      unsigned char pgm[7], unsigned char txcsb[5],
+		      void *private_data, ak4114_t **r_ak4114);
+void snd_ak4114_reg_write(ak4114_t *ak4114, unsigned char reg, unsigned char mask, unsigned char val);
+void snd_ak4114_reinit(ak4114_t *ak4114);
+int snd_ak4114_build(ak4114_t *ak4114,
+		     snd_pcm_substream_t *playback_substream,
+                     snd_pcm_substream_t *capture_substream);
+int snd_ak4114_external_rate(ak4114_t *ak4114);
+int snd_ak4114_check_rate_and_errors(ak4114_t *ak4114, unsigned int flags);
+
+#endif /* __SOUND_AK4114_H */
+
diff --git a/include/sound/ak4117.h b/include/sound/ak4117.h
new file mode 100644
index 000000000000..9e1dab17c33e
--- /dev/null
+++ b/include/sound/ak4117.h
@@ -0,0 +1,191 @@
+#ifndef __SOUND_AK4117_H
+#define __SOUND_AK4117_H
+
+/*
+ *  Routines for Asahi Kasei AK4117
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define AK4117_REG_PWRDN	0x00	/* power down */
+#define AK4117_REG_CLOCK	0x01	/* clock control */
+#define AK4117_REG_IO		0x02	/* input/output control */
+#define AK4117_REG_INT0_MASK	0x03	/* interrupt0 mask */
+#define AK4117_REG_INT1_MASK	0x04	/* interrupt1 mask */
+#define AK4117_REG_RCS0		0x05	/* receiver status 0 */
+#define AK4117_REG_RCS1		0x06	/* receiver status 1 */
+#define AK4117_REG_RCS2		0x07	/* receiver status 2 */
+#define AK4117_REG_RXCSB0	0x08	/* RX channel status byte 0 */
+#define AK4117_REG_RXCSB1	0x09	/* RX channel status byte 1 */
+#define AK4117_REG_RXCSB2	0x0a	/* RX channel status byte 2 */
+#define AK4117_REG_RXCSB3	0x0b	/* RX channel status byte 3 */
+#define AK4117_REG_RXCSB4	0x0c	/* RX channel status byte 4 */
+#define AK4117_REG_Pc0		0x0d	/* burst preamble Pc byte 0 */
+#define AK4117_REG_Pc1		0x0e	/* burst preamble Pc byte 1 */
+#define AK4117_REG_Pd0		0x0f	/* burst preamble Pd byte 0 */
+#define AK4117_REG_Pd1		0x10	/* burst preamble Pd byte 1 */
+#define AK4117_REG_QSUB_ADDR	0x11	/* Q-subcode address + control */
+#define AK4117_REG_QSUB_TRACK	0x12	/* Q-subcode track */
+#define AK4117_REG_QSUB_INDEX	0x13	/* Q-subcode index */
+#define AK4117_REG_QSUB_MINUTE	0x14	/* Q-subcode minute */
+#define AK4117_REG_QSUB_SECOND	0x15	/* Q-subcode second */
+#define AK4117_REG_QSUB_FRAME	0x16	/* Q-subcode frame */
+#define AK4117_REG_QSUB_ZERO	0x17	/* Q-subcode zero */
+#define AK4117_REG_QSUB_ABSMIN	0x18	/* Q-subcode absolute minute */
+#define AK4117_REG_QSUB_ABSSEC	0x19	/* Q-subcode absolute second */
+#define AK4117_REG_QSUB_ABSFRM	0x1a	/* Q-subcode absolute frame */
+
+/* sizes */
+#define AK4117_REG_RXCSB_SIZE	((AK4117_REG_RXCSB4-AK4117_REG_RXCSB0)+1)
+#define AK4117_REG_QSUB_SIZE	((AK4117_REG_QSUB_ABSFRM-AK4117_REG_QSUB_ADDR)+1)
+
+/* AK4117_REG_PWRDN bits */
+#define AK4117_EXCT		(1<<4)	/* 0 = X'tal mode, 1 = external clock mode */
+#define AK4117_XTL1		(1<<3)	/* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
+#define AK4117_XTL0		(1<<2)	/* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
+#define AK4117_XTL_11_2896M	(0)
+#define AK4117_XTL_12_288M	AK4117_XTL0
+#define AK4117_XTL_24_576M	AK4117_XTL1
+#define AK4117_XTL_EXT		(AK4117_XTL1|AK4117_XTL0)
+#define AK4117_PWN		(1<<1)	/* 0 = power down, 1 = normal operation */
+#define AK4117_RST		(1<<0)	/* 0 = reset & initialize (except this register), 1 = normal operation */
+
+/* AK4117_REQ_CLOCK bits */
+#define AK4117_LP		(1<<7)	/* 0 = normal mode, 1 = low power mode (Fs up to 48kHz only) */
+#define AK4117_PKCS1		(1<<6)	/* master clock frequency at PLL mode (when LP == 0) */
+#define AK4117_PKCS0		(1<<5)
+#define AK4117_PKCS_512fs	(0)
+#define AK4117_PKCS_256fs	AK4117_PKCS0
+#define AK4117_PKCS_128fs	AK4117_PKCS1
+#define AK4117_DIV		(1<<4)	/* 0 = MCKO == Fs, 1 = MCKO == Fs / 2; X'tal mode only */
+#define AK4117_XCKS1		(1<<3)	/* master clock frequency at X'tal mode */
+#define AK4117_XCKS0		(1<<2)
+#define AK4117_XCKS_128fs	(0)
+#define AK4117_XCKS_256fs	AK4117_XCKS0
+#define AK4117_XCKS_512fs	AK4117_XCKS1
+#define AK4117_XCKS_1024fs	(AK4117_XCKS1|AK4117_XCKS0)
+#define AK4117_CM1		(1<<1)	/* MCKO operation mode select */
+#define AK4117_CM0		(1<<0)
+#define AK4117_CM_PLL		(0)		/* use RX input as master clock */
+#define AK4117_CM_XTAL		(AK4117_CM0)	/* use X'tal as master clock */
+#define AK4117_CM_PLL_XTAL	(AK4117_CM1)	/* use Rx input but X'tal when PLL loses lock */
+#define AK4117_CM_MONITOR	(AK4117_CM0|AK4117_CM1) /* use X'tal as master clock, but use PLL for monitoring */
+
+/* AK4117_REG_IO */
+#define AK4117_IPS		(1<<7)	/* Input Recovery Data Select, 0 = RX0, 1 = RX1 */
+#define AK4117_UOUTE		(1<<6)	/* U-bit output enable to UOUT, 0 = disable, 1 = enable */
+#define AK4117_CS12		(1<<5)	/* channel status select, 0 = channel1, 1 = channel2 */
+#define AK4117_EFH2		(1<<4)	/* INT0 pin hold count select */
+#define AK4117_EFH1		(1<<3)
+#define AK4117_EFH_512LRCLK	(0)
+#define AK4117_EFH_1024LRCLK	(AK4117_EFH1)
+#define AK4117_EFH_2048LRCLK	(AK4117_EFH2)
+#define AK4117_EFH_4096LRCLK	(AK4117_EFH1|AK4117_EFH2)
+#define AK4117_DIF2		(1<<2)	/* audio data format control */
+#define AK4117_DIF1		(1<<1)
+#define AK4117_DIF0		(1<<0)
+#define AK4117_DIF_16R		(0)				/* STDO: 16-bit, right justified */
+#define AK4117_DIF_18R		(AK4117_DIF0)			/* STDO: 18-bit, right justified */
+#define AK4117_DIF_20R		(AK4117_DIF1)			/* STDO: 20-bit, right justified */
+#define AK4117_DIF_24R		(AK4117_DIF1|AK4117_DIF0)	/* STDO: 24-bit, right justified */
+#define AK4117_DIF_24L		(AK4117_DIF2)			/* STDO: 24-bit, left justified */
+#define AK4117_DIF_24I2S	(AK4117_DIF2|AK4117_DIF0)	/* STDO: I2S */
+
+/* AK4117_REG_INT0_MASK & AK4117_REG_INT1_MASK */
+#define AK4117_MULK		(1<<7)	/* mask enable for UNLOCK bit */
+#define AK4117_MPAR		(1<<6)	/* mask enable for PAR bit */
+#define AK4117_MAUTO		(1<<5)	/* mask enable for AUTO bit */
+#define AK4117_MV		(1<<4)	/* mask enable for V bit */
+#define AK4117_MAUD		(1<<3)	/* mask enable for AUDION bit */
+#define AK4117_MSTC		(1<<2)	/* mask enable for STC bit */
+#define AK4117_MCIT		(1<<1)	/* mask enable for CINT bit */
+#define AK4117_MQIT		(1<<0)	/* mask enable for QINT bit */
+
+/* AK4117_REG_RCS0 */
+#define AK4117_UNLCK		(1<<7)	/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4117_PAR		(1<<6)	/* parity error or biphase error status, 0 = no error, 1 = error */
+#define AK4117_AUTO		(1<<5)	/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4117_V		(1<<4)	/* Validity bit, 0 = valid, 1 = invalid */
+#define AK4117_AUDION		(1<<3)	/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4117_STC		(1<<2)	/* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
+#define AK4117_CINT		(1<<1)	/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4117_QINT		(1<<0)	/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+
+/* AK4117_REG_RCS1 */
+#define AK4117_DTSCD		(1<<6)	/* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
+#define AK4117_NPCM		(1<<5)	/* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
+#define AK4117_PEM		(1<<4)	/* Pre-emphasis detect, 0 = OFF, 1 = ON */
+#define AK4117_FS3		(1<<3)	/* sampling frequency detection */
+#define AK4117_FS2		(1<<2)
+#define AK4117_FS1		(1<<1)
+#define AK4117_FS0		(1<<0)
+#define AK4117_FS_44100HZ	(0)
+#define AK4117_FS_48000HZ	(AK4117_FS1)
+#define AK4117_FS_32000HZ	(AK4117_FS1|AK4117_FS0)
+#define AK4117_FS_88200HZ	(AK4117_FS3)
+#define AK4117_FS_96000HZ	(AK4117_FS3|AK4117_FS1)
+#define AK4117_FS_176400HZ	(AK4117_FS3|AK4117_FS2)
+#define AK4117_FS_192000HZ	(AK4117_FS3|AK4117_FS2|AK4117_FS1)
+
+/* AK4117_REG_RCS2 */
+#define AK4117_CCRC		(1<<1)	/* CRC for channel status, 0 = no error, 1 = error */
+#define AK4117_QCRC		(1<<0)	/* CRC for Q-subcode, 0 = no error, 1 = error */
+
+/* flags for snd_ak4117_check_rate_and_errors() */
+#define AK4117_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4117_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4117_CONTROLS		13
+
+typedef void (ak4117_write_t)(void *private_data, unsigned char addr, unsigned char data);
+typedef unsigned char (ak4117_read_t)(void *private_data, unsigned char addr);
+
+typedef struct ak4117 ak4117_t;
+
+struct ak4117 {
+	snd_card_t * card;
+	ak4117_write_t * write;
+	ak4117_read_t * read;
+	void * private_data;
+	unsigned int init: 1;
+	spinlock_t lock;
+	unsigned char regmap[5];
+	snd_kcontrol_t *kctls[AK4117_CONTROLS];
+	snd_pcm_substream_t *substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	unsigned char rcs2;
+	struct timer_list timer;	/* statistic timer */
+	void *change_callback_private;
+	void (*change_callback)(ak4117_t *ak4117, unsigned char c0, unsigned char c1);
+};
+
+int snd_ak4117_create(snd_card_t *card, ak4117_read_t *read, ak4117_write_t *write,
+		      unsigned char pgm[5], void *private_data, ak4117_t **r_ak4117);
+void snd_ak4117_reg_write(ak4117_t *ak4117, unsigned char reg, unsigned char mask, unsigned char val);
+void snd_ak4117_reinit(ak4117_t *ak4117);
+int snd_ak4117_build(ak4117_t *ak4117, snd_pcm_substream_t *capture_substream);
+int snd_ak4117_external_rate(ak4117_t *ak4117);
+int snd_ak4117_check_rate_and_errors(ak4117_t *ak4117, unsigned int flags);
+
+#endif /* __SOUND_AK4117_H */
+
diff --git a/include/sound/ak4531_codec.h b/include/sound/ak4531_codec.h
new file mode 100644
index 000000000000..8b18992376d5
--- /dev/null
+++ b/include/sound/ak4531_codec.h
@@ -0,0 +1,80 @@
+#ifndef __SOUND_AK4531_CODEC_H
+#define __SOUND_AK4531_CODEC_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *  Universal interface for Audio Codec '97
+ *
+ *  For more details look to AC '97 component specification revision 2.1
+ *  by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "info.h"
+#include "control.h"
+
+/*
+ *  ASAHI KASEI - AK4531 codec
+ *  - not really AC'97 codec, but it uses very similar interface as AC'97
+ */
+
+/*
+ *  AK4531 codec registers
+ */
+
+#define AK4531_LMASTER  0x00	/* master volume left */
+#define AK4531_RMASTER  0x01	/* master volume right */
+#define AK4531_LVOICE   0x02	/* channel volume left */
+#define AK4531_RVOICE   0x03	/* channel volume right */
+#define AK4531_LFM      0x04	/* FM volume left */
+#define AK4531_RFM      0x05	/* FM volume right */
+#define AK4531_LCD      0x06	/* CD volume left */
+#define AK4531_RCD      0x07	/* CD volume right */
+#define AK4531_LLINE    0x08	/* LINE volume left */
+#define AK4531_RLINE    0x09	/* LINE volume right */
+#define AK4531_LAUXA    0x0a	/* AUXA volume left */
+#define AK4531_RAUXA    0x0b	/* AUXA volume right */
+#define AK4531_MONO1    0x0c	/* MONO1 volume left */
+#define AK4531_MONO2    0x0d	/* MONO1 volume right */
+#define AK4531_MIC      0x0e	/* MIC volume */
+#define AK4531_MONO_OUT 0x0f	/* Mono-out volume */
+#define AK4531_OUT_SW1  0x10	/* Output mixer switch 1 */
+#define AK4531_OUT_SW2  0x11	/* Output mixer switch 2 */
+#define AK4531_LIN_SW1  0x12	/* Input left mixer switch 1 */
+#define AK4531_RIN_SW1  0x13	/* Input right mixer switch 1 */
+#define AK4531_LIN_SW2  0x14	/* Input left mixer switch 2 */
+#define AK4531_RIN_SW2  0x15	/* Input right mixer switch 2 */
+#define AK4531_RESET    0x16	/* Reset & power down */
+#define AK4531_CLOCK    0x17	/* Clock select */
+#define AK4531_AD_IN    0x18	/* AD input select */
+#define AK4531_MIC_GAIN 0x19	/* MIC amplified gain */
+
+typedef struct _snd_ak4531 ak4531_t;
+
+struct _snd_ak4531 {
+	void (*write) (ak4531_t *ak4531, unsigned short reg, unsigned short val);
+	void *private_data;
+	void (*private_free) (ak4531_t *ak4531);
+	/* --- */
+	unsigned char regs[0x20];
+	struct semaphore reg_mutex;
+};
+
+int snd_ak4531_mixer(snd_card_t * card, ak4531_t * _ak4531, ak4531_t ** rak4531);
+
+#endif /* __SOUND_AK4531_CODEC_H */
diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h
new file mode 100644
index 000000000000..e94ac0282318
--- /dev/null
+++ b/include/sound/ak4xxx-adda.h
@@ -0,0 +1,69 @@
+#ifndef __SOUND_AK4XXX_ADDA_H
+#define __SOUND_AK4XXX_ADDA_H
+
+/*
+ *   ALSA driver for AK4524 / AK4528 / AK4529 / AK4355 / AK4381
+ *   AD and DA converters
+ *
+ *	Copyright (c) 2000 Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */      
+
+#ifndef AK4XXX_MAX_CHIPS
+#define AK4XXX_MAX_CHIPS	4
+#endif
+
+typedef struct snd_akm4xxx akm4xxx_t;
+
+struct snd_ak4xxx_ops {
+	void (*lock)(akm4xxx_t *ak, int chip);
+	void (*unlock)(akm4xxx_t *ak, int chip);
+	void (*write)(akm4xxx_t *ak, int chip, unsigned char reg, unsigned char val);
+	// unsigned char (*read)(akm4xxx_t *ak, int chip, unsigned char reg);
+	void (*set_rate_val)(akm4xxx_t *ak, unsigned int rate);
+};
+
+#define AK4XXX_IMAGE_SIZE	(AK4XXX_MAX_CHIPS * 16)	/* 64 bytes */
+
+struct snd_akm4xxx {
+	snd_card_t *card;
+	unsigned int num_adcs;				/* AK4524 or AK4528 ADCs */
+	unsigned int num_dacs;				/* AK4524 or AK4528 DACs */
+	unsigned char images[AK4XXX_IMAGE_SIZE];	/* saved register image */
+	unsigned char ipga_gain[AK4XXX_MAX_CHIPS][2];	/* saved register image for IPGA (AK4528) */
+	unsigned long private_value[AK4XXX_MAX_CHIPS];	/* helper for driver */
+	void *private_data[AK4XXX_MAX_CHIPS];		/* helper for driver */
+	/* template should fill the following fields */
+	unsigned int idx_offset;			/* control index offset */
+	enum {
+		SND_AK4524, SND_AK4528, SND_AK4529,
+		SND_AK4355, SND_AK4358, SND_AK4381
+	} type;
+	struct snd_ak4xxx_ops ops;
+};
+
+void snd_akm4xxx_write(akm4xxx_t *ak, int chip, unsigned char reg, unsigned char val);
+void snd_akm4xxx_reset(akm4xxx_t *ak, int state);
+void snd_akm4xxx_init(akm4xxx_t *ak);
+int snd_akm4xxx_build_controls(akm4xxx_t *ak);
+
+#define snd_akm4xxx_get(ak,chip,reg) (ak)->images[(chip) * 16 + (reg)]
+#define snd_akm4xxx_set(ak,chip,reg,val) ((ak)->images[(chip) * 16 + (reg)] = (val))
+#define snd_akm4xxx_get_ipga(ak,chip,reg) (ak)->ipga_gain[chip][(reg)-4]
+#define snd_akm4xxx_set_ipga(ak,chip,reg,val) ((ak)->ipga_gain[chip][(reg)-4] = (val))
+
+#endif /* __SOUND_AK4XXX_ADDA_H */
diff --git a/include/sound/asequencer.h b/include/sound/asequencer.h
new file mode 100644
index 000000000000..728efd504262
--- /dev/null
+++ b/include/sound/asequencer.h
@@ -0,0 +1,908 @@
+/*
+ *  Main header file for the ALSA sequencer
+ *  Copyright (c) 1998-1999 by Frank van de Pol <fvdpol@coil.demon.nl>
+ *            (c) 1998-1999 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#ifndef __SOUND_ASEQUENCER_H
+#define __SOUND_ASEQUENCER_H
+
+#ifndef __KERNEL__
+#include <linux/ioctl.h>
+#endif
+
+#include <sound/asound.h>
+
+/** version of the sequencer */
+#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION (1, 0, 1)
+
+/**
+ * definition of sequencer event types
+ */
+
+/** system messages
+ * event data type = #sndrv_seq_result_t
+ */
+#define SNDRV_SEQ_EVENT_SYSTEM		0
+#define SNDRV_SEQ_EVENT_RESULT		1
+
+/** note messages (channel specific)
+ * event data type = #sndrv_seq_ev_note
+ */
+#define SNDRV_SEQ_EVENT_NOTE		5
+#define SNDRV_SEQ_EVENT_NOTEON		6
+#define SNDRV_SEQ_EVENT_NOTEOFF		7
+#define SNDRV_SEQ_EVENT_KEYPRESS	8
+	
+/** control messages (channel specific)
+ * event data type = #sndrv_seq_ev_ctrl
+ */
+#define SNDRV_SEQ_EVENT_CONTROLLER	10
+#define SNDRV_SEQ_EVENT_PGMCHANGE	11
+#define SNDRV_SEQ_EVENT_CHANPRESS	12
+#define SNDRV_SEQ_EVENT_PITCHBEND	13	/**< from -8192 to 8191 */
+#define SNDRV_SEQ_EVENT_CONTROL14	14	/**< 14 bit controller value */
+#define SNDRV_SEQ_EVENT_NONREGPARAM	15	/**< 14 bit NRPN address + 14 bit unsigned value */
+#define SNDRV_SEQ_EVENT_REGPARAM	16	/**< 14 bit RPN address + 14 bit unsigned value */
+
+/** synchronisation messages
+ * event data type = #sndrv_seq_ev_ctrl
+ */
+#define SNDRV_SEQ_EVENT_SONGPOS		20	/* Song Position Pointer with LSB and MSB values */
+#define SNDRV_SEQ_EVENT_SONGSEL		21	/* Song Select with song ID number */
+#define SNDRV_SEQ_EVENT_QFRAME		22	/* midi time code quarter frame */
+#define SNDRV_SEQ_EVENT_TIMESIGN	23	/* SMF Time Signature event */
+#define SNDRV_SEQ_EVENT_KEYSIGN		24	/* SMF Key Signature event */
+	        
+/** timer messages
+ * event data type = sndrv_seq_ev_queue_control_t
+ */
+#define SNDRV_SEQ_EVENT_START		30	/* midi Real Time Start message */
+#define SNDRV_SEQ_EVENT_CONTINUE	31	/* midi Real Time Continue message */
+#define SNDRV_SEQ_EVENT_STOP		32	/* midi Real Time Stop message */	
+#define	SNDRV_SEQ_EVENT_SETPOS_TICK	33	/* set tick queue position */
+#define SNDRV_SEQ_EVENT_SETPOS_TIME	34	/* set realtime queue position */
+#define SNDRV_SEQ_EVENT_TEMPO		35	/* (SMF) Tempo event */
+#define SNDRV_SEQ_EVENT_CLOCK		36	/* midi Real Time Clock message */
+#define SNDRV_SEQ_EVENT_TICK		37	/* midi Real Time Tick message */
+#define SNDRV_SEQ_EVENT_QUEUE_SKEW	38	/* skew queue tempo */
+
+/** others
+ * event data type = none
+ */
+#define SNDRV_SEQ_EVENT_TUNE_REQUEST	40	/* tune request */
+#define SNDRV_SEQ_EVENT_RESET		41	/* reset to power-on state */
+#define SNDRV_SEQ_EVENT_SENSING		42	/* "active sensing" event */
+
+/** echo back, kernel private messages
+ * event data type = any type
+ */
+#define SNDRV_SEQ_EVENT_ECHO		50	/* echo event */
+#define SNDRV_SEQ_EVENT_OSS		51	/* OSS raw event */
+
+/** system status messages (broadcast for subscribers)
+ * event data type = sndrv_seq_addr_t
+ */
+#define SNDRV_SEQ_EVENT_CLIENT_START	60	/* new client has connected */
+#define SNDRV_SEQ_EVENT_CLIENT_EXIT	61	/* client has left the system */
+#define SNDRV_SEQ_EVENT_CLIENT_CHANGE	62	/* client status/info has changed */
+#define SNDRV_SEQ_EVENT_PORT_START	63	/* new port was created */
+#define SNDRV_SEQ_EVENT_PORT_EXIT	64	/* port was deleted from system */
+#define SNDRV_SEQ_EVENT_PORT_CHANGE	65	/* port status/info has changed */
+
+/** port connection changes
+ * event data type = sndrv_seq_connect_t
+ */
+#define SNDRV_SEQ_EVENT_PORT_SUBSCRIBED	66	/* ports connected */
+#define SNDRV_SEQ_EVENT_PORT_UNSUBSCRIBED 67	/* ports disconnected */
+
+/** synthesizer events
+ * event data type = sndrv_seq_eve_sample_control_t
+ */
+#define SNDRV_SEQ_EVENT_SAMPLE		70	/* sample select */
+#define SNDRV_SEQ_EVENT_SAMPLE_CLUSTER	71	/* sample cluster select */
+#define SNDRV_SEQ_EVENT_SAMPLE_START	72	/* voice start */
+#define SNDRV_SEQ_EVENT_SAMPLE_STOP	73	/* voice stop */
+#define SNDRV_SEQ_EVENT_SAMPLE_FREQ	74	/* playback frequency */
+#define SNDRV_SEQ_EVENT_SAMPLE_VOLUME	75	/* volume and balance */
+#define SNDRV_SEQ_EVENT_SAMPLE_LOOP	76	/* sample loop */
+#define SNDRV_SEQ_EVENT_SAMPLE_POSITION	77	/* sample position */
+#define SNDRV_SEQ_EVENT_SAMPLE_PRIVATE1	78	/* private (hardware dependent) event */
+
+/** user-defined events with fixed length
+ * event data type = any
+ */
+#define SNDRV_SEQ_EVENT_USR0		90
+#define SNDRV_SEQ_EVENT_USR1		91
+#define SNDRV_SEQ_EVENT_USR2		92
+#define SNDRV_SEQ_EVENT_USR3		93
+#define SNDRV_SEQ_EVENT_USR4		94
+#define SNDRV_SEQ_EVENT_USR5		95
+#define SNDRV_SEQ_EVENT_USR6		96
+#define SNDRV_SEQ_EVENT_USR7		97
+#define SNDRV_SEQ_EVENT_USR8		98
+#define SNDRV_SEQ_EVENT_USR9		99
+
+/** instrument layer
+ * variable length data can be passed directly to the driver
+ */
+#define SNDRV_SEQ_EVENT_INSTR_BEGIN	100	/* begin of instrument management */
+#define SNDRV_SEQ_EVENT_INSTR_END	101	/* end of instrument management */
+#define SNDRV_SEQ_EVENT_INSTR_INFO	102	/* instrument interface info */
+#define SNDRV_SEQ_EVENT_INSTR_INFO_RESULT 103	/* result */
+#define SNDRV_SEQ_EVENT_INSTR_FINFO	104	/* get format info */
+#define SNDRV_SEQ_EVENT_INSTR_FINFO_RESULT 105	/* get format info */
+#define SNDRV_SEQ_EVENT_INSTR_RESET	106	/* reset instrument memory */
+#define SNDRV_SEQ_EVENT_INSTR_STATUS	107	/* instrument interface status */
+#define SNDRV_SEQ_EVENT_INSTR_STATUS_RESULT 108	/* result */
+#define SNDRV_SEQ_EVENT_INSTR_PUT	109	/* put instrument to port */
+#define SNDRV_SEQ_EVENT_INSTR_GET	110	/* get instrument from port */
+#define SNDRV_SEQ_EVENT_INSTR_GET_RESULT 111	/* result */
+#define SNDRV_SEQ_EVENT_INSTR_FREE	112	/* free instrument(s) */
+#define SNDRV_SEQ_EVENT_INSTR_LIST	113	/* instrument list */
+#define SNDRV_SEQ_EVENT_INSTR_LIST_RESULT 114	/* result */
+#define SNDRV_SEQ_EVENT_INSTR_CLUSTER	115	/* cluster parameters */
+#define SNDRV_SEQ_EVENT_INSTR_CLUSTER_GET 116	/* get cluster parameters */
+#define SNDRV_SEQ_EVENT_INSTR_CLUSTER_RESULT 117 /* result */
+#define SNDRV_SEQ_EVENT_INSTR_CHANGE	118	/* instrument change */
+/* 119-129: reserved */
+
+/* 130-139: variable length events
+ * event data type = sndrv_seq_ev_ext
+ * (SNDRV_SEQ_EVENT_LENGTH_VARIABLE must be set)
+ */
+#define SNDRV_SEQ_EVENT_SYSEX		130	/* system exclusive data (variable length) */
+#define SNDRV_SEQ_EVENT_BOUNCE		131	/* error event */
+/* 132-134: reserved */
+#define SNDRV_SEQ_EVENT_USR_VAR0	135
+#define SNDRV_SEQ_EVENT_USR_VAR1	136
+#define SNDRV_SEQ_EVENT_USR_VAR2	137
+#define SNDRV_SEQ_EVENT_USR_VAR3	138
+#define SNDRV_SEQ_EVENT_USR_VAR4	139
+
+/* 150-151: kernel events with quote - DO NOT use in user clients */
+#define SNDRV_SEQ_EVENT_KERNEL_ERROR	150
+#define SNDRV_SEQ_EVENT_KERNEL_QUOTE	151	/* obsolete */
+
+/* 152-191: reserved */
+
+/* 192-254: hardware specific events */
+
+/* 255: special event */
+#define SNDRV_SEQ_EVENT_NONE		255
+
+
+typedef unsigned char sndrv_seq_event_type_t;
+
+/** event address */
+struct sndrv_seq_addr {
+	unsigned char client;	/**< Client number:         0..255, 255 = broadcast to all clients */
+	unsigned char port;	/**< Port within client:    0..255, 255 = broadcast to all ports */
+};
+
+/** port connection */
+struct sndrv_seq_connect {
+	struct sndrv_seq_addr sender;
+	struct sndrv_seq_addr dest;
+};
+
+
+#define SNDRV_SEQ_ADDRESS_UNKNOWN	253	/* unknown source */
+#define SNDRV_SEQ_ADDRESS_SUBSCRIBERS	254	/* send event to all subscribed ports */
+#define SNDRV_SEQ_ADDRESS_BROADCAST	255	/* send event to all queues/clients/ports/channels */
+#define SNDRV_SEQ_QUEUE_DIRECT		253	/* direct dispatch */
+
+	/* event mode flag - NOTE: only 8 bits available! */
+#define SNDRV_SEQ_TIME_STAMP_TICK	(0<<0) /* timestamp in clock ticks */
+#define SNDRV_SEQ_TIME_STAMP_REAL	(1<<0) /* timestamp in real time */
+#define SNDRV_SEQ_TIME_STAMP_MASK	(1<<0)
+
+#define SNDRV_SEQ_TIME_MODE_ABS		(0<<1)	/* absolute timestamp */
+#define SNDRV_SEQ_TIME_MODE_REL		(1<<1)	/* relative to current time */
+#define SNDRV_SEQ_TIME_MODE_MASK	(1<<1)
+
+#define SNDRV_SEQ_EVENT_LENGTH_FIXED	(0<<2)	/* fixed event size */
+#define SNDRV_SEQ_EVENT_LENGTH_VARIABLE	(1<<2)	/* variable event size */
+#define SNDRV_SEQ_EVENT_LENGTH_VARUSR	(2<<2)	/* variable event size - user memory space */
+#define SNDRV_SEQ_EVENT_LENGTH_MASK	(3<<2)
+
+#define SNDRV_SEQ_PRIORITY_NORMAL	(0<<4)	/* normal priority */
+#define SNDRV_SEQ_PRIORITY_HIGH		(1<<4)	/* event should be processed before others */
+#define SNDRV_SEQ_PRIORITY_MASK		(1<<4)
+
+
+	/* note event */
+struct sndrv_seq_ev_note {
+	unsigned char channel;
+	unsigned char note;
+	unsigned char velocity;
+	unsigned char off_velocity;	/* only for SNDRV_SEQ_EVENT_NOTE */
+	unsigned int duration;		/* only for SNDRV_SEQ_EVENT_NOTE */
+};
+
+	/* controller event */
+struct sndrv_seq_ev_ctrl {
+	unsigned char channel;
+	unsigned char unused1, unused2, unused3;	/* pad */
+	unsigned int param;
+	signed int value;
+};
+
+	/* generic set of bytes (12x8 bit) */
+struct sndrv_seq_ev_raw8 {
+	unsigned char d[12];	/* 8 bit value */
+};
+
+	/* generic set of integers (3x32 bit) */
+struct sndrv_seq_ev_raw32 {
+	unsigned int d[3];	/* 32 bit value */
+};
+
+	/* external stored data */
+struct sndrv_seq_ev_ext {
+	unsigned int len;	/* length of data */
+	void *ptr;		/* pointer to data (note: maybe 64-bit) */
+} __attribute__((packed));
+
+/* Instrument cluster type */
+typedef unsigned int sndrv_seq_instr_cluster_t;
+
+/* Instrument type */
+struct sndrv_seq_instr {
+	sndrv_seq_instr_cluster_t cluster;
+	unsigned int std;		/* the upper byte means a private instrument (owner - client #) */
+	unsigned short bank;
+	unsigned short prg;
+};
+
+	/* sample number */
+struct sndrv_seq_ev_sample {
+	unsigned int std;
+	unsigned short bank;
+	unsigned short prg;
+};
+
+	/* sample cluster */
+struct sndrv_seq_ev_cluster {
+	sndrv_seq_instr_cluster_t cluster;
+};
+
+	/* sample position */
+typedef unsigned int sndrv_seq_position_t; /* playback position (in samples) * 16 */
+
+	/* sample stop mode */
+enum sndrv_seq_stop_mode {
+	SAMPLE_STOP_IMMEDIATELY = 0,	/* terminate playing immediately */
+	SAMPLE_STOP_VENVELOPE = 1,	/* finish volume envelope */
+	SAMPLE_STOP_LOOP = 2		/* terminate loop and finish wave */
+};
+
+	/* sample frequency */
+typedef int sndrv_seq_frequency_t; /* playback frequency in HZ * 16 */
+
+	/* sample volume control; if any value is set to -1 == do not change */
+struct sndrv_seq_ev_volume {
+	signed short volume;	/* range: 0-16383 */
+	signed short lr;	/* left-right balance; range: 0-16383 */
+	signed short fr;	/* front-rear balance; range: 0-16383 */
+	signed short du;	/* down-up balance; range: 0-16383 */
+};
+
+	/* simple loop redefinition */
+struct sndrv_seq_ev_loop {
+	unsigned int start;	/* loop start (in samples) * 16 */
+	unsigned int end;	/* loop end (in samples) * 16 */
+};
+
+struct sndrv_seq_ev_sample_control {
+	unsigned char channel;
+	unsigned char unused1, unused2, unused3;	/* pad */
+	union {
+		struct sndrv_seq_ev_sample sample;
+		struct sndrv_seq_ev_cluster cluster;
+		sndrv_seq_position_t position;
+		enum sndrv_seq_stop_mode stop_mode;
+		sndrv_seq_frequency_t frequency;
+		struct sndrv_seq_ev_volume volume;
+		struct sndrv_seq_ev_loop loop;
+		unsigned char raw8[8];
+	} param;
+};
+
+
+
+/* INSTR_BEGIN event */
+struct sndrv_seq_ev_instr_begin {
+	int timeout;		/* zero = forever, otherwise timeout in ms */
+};
+
+struct sndrv_seq_result {
+	int event;		/* processed event type */
+	int result;
+};
+
+
+struct sndrv_seq_real_time {
+	unsigned int tv_sec;	/* seconds */
+	unsigned int tv_nsec;	/* nanoseconds */
+};
+
+typedef unsigned int sndrv_seq_tick_time_t;	/* midi ticks */
+
+union sndrv_seq_timestamp {
+	sndrv_seq_tick_time_t tick;
+	struct sndrv_seq_real_time time;
+};
+
+struct sndrv_seq_queue_skew {
+	unsigned int value;
+	unsigned int base;
+};
+
+	/* queue timer control */
+struct sndrv_seq_ev_queue_control {
+	unsigned char queue;			/* affected queue */
+	unsigned char pad[3];			/* reserved */
+	union {
+		signed int value;		/* affected value (e.g. tempo) */
+		union sndrv_seq_timestamp time;	/* time */
+		unsigned int position;		/* sync position */
+		struct sndrv_seq_queue_skew skew;
+		unsigned int d32[2];
+		unsigned char d8[8];
+	} param;
+};
+
+	/* quoted event - inside the kernel only */
+struct sndrv_seq_ev_quote {
+	struct sndrv_seq_addr origin;		/* original sender */
+	unsigned short value;		/* optional data */
+	struct sndrv_seq_event *event;		/* quoted event */
+} __attribute__((packed));
+
+
+	/* sequencer event */
+struct sndrv_seq_event {
+	sndrv_seq_event_type_t type;	/* event type */
+	unsigned char flags;		/* event flags */
+	char tag;
+	
+	unsigned char queue;		/* schedule queue */
+	union sndrv_seq_timestamp time;	/* schedule time */
+
+
+	struct sndrv_seq_addr source;	/* source address */
+	struct sndrv_seq_addr dest;	/* destination address */
+
+	union {				/* event data... */
+		struct sndrv_seq_ev_note note;
+		struct sndrv_seq_ev_ctrl control;
+		struct sndrv_seq_ev_raw8 raw8;
+		struct sndrv_seq_ev_raw32 raw32;
+		struct sndrv_seq_ev_ext ext;
+		struct sndrv_seq_ev_queue_control queue;
+		union sndrv_seq_timestamp time;
+		struct sndrv_seq_addr addr;
+		struct sndrv_seq_connect connect;
+		struct sndrv_seq_result result;
+		struct sndrv_seq_ev_instr_begin instr_begin;
+		struct sndrv_seq_ev_sample_control sample;
+		struct sndrv_seq_ev_quote quote;
+	} data;
+};
+
+
+/*
+ * bounce event - stored as variable size data
+ */
+struct sndrv_seq_event_bounce {
+	int err;
+	struct sndrv_seq_event event;
+	/* external data follows here. */
+};
+
+#define sndrv_seq_event_bounce_ext_data(ev) ((void*)((char *)(ev)->data.ext.ptr + sizeof(sndrv_seq_event_bounce_t)))
+
+/*
+ * type check macros
+ */
+/* result events: 0-4 */
+#define sndrv_seq_ev_is_result_type(ev)	((ev)->type < 5)
+/* channel specific events: 5-19 */
+#define sndrv_seq_ev_is_channel_type(ev)	((ev)->type >= 5 && (ev)->type < 20)
+/* note events: 5-9 */
+#define sndrv_seq_ev_is_note_type(ev)	((ev)->type >= 5 && (ev)->type < 10)
+/* control events: 10-19 */
+#define sndrv_seq_ev_is_control_type(ev)	((ev)->type >= 10 && (ev)->type < 20)
+/* queue control events: 30-39 */
+#define sndrv_seq_ev_is_queue_type(ev)	((ev)->type >= 30 && (ev)->type < 40)
+/* system status messages */
+#define sndrv_seq_ev_is_message_type(ev)	((ev)->type >= 60 && (ev)->type < 69)
+/* sample messages */
+#define sndrv_seq_ev_is_sample_type(ev)	((ev)->type >= 70 && (ev)->type < 79)
+/* user-defined messages */
+#define sndrv_seq_ev_is_user_type(ev)	((ev)->type >= 90 && (ev)->type < 99)
+/* fixed length events: 0-99 */
+#define sndrv_seq_ev_is_fixed_type(ev)	((ev)->type < 100)
+/* instrument layer events: 100-129 */
+#define sndrv_seq_ev_is_instr_type(ev)	((ev)->type >= 100 && (ev)->type < 130)
+/* variable length events: 130-139 */
+#define sndrv_seq_ev_is_variable_type(ev)	((ev)->type >= 130 && (ev)->type < 140)
+/* reserved for kernel */
+#define sndrv_seq_ev_is_reserved(ev)	((ev)->type >= 150)
+
+/* direct dispatched events */
+#define sndrv_seq_ev_is_direct(ev)	((ev)->queue == SNDRV_SEQ_QUEUE_DIRECT)
+
+/*
+ * macros to check event flags
+ */
+/* prior events */
+#define sndrv_seq_ev_is_prior(ev)		(((ev)->flags & SNDRV_SEQ_PRIORITY_MASK) == SNDRV_SEQ_PRIORITY_HIGH)
+
+/* event length type */
+#define sndrv_seq_ev_length_type(ev)	((ev)->flags & SNDRV_SEQ_EVENT_LENGTH_MASK)
+#define sndrv_seq_ev_is_fixed(ev)		(sndrv_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_FIXED)
+#define sndrv_seq_ev_is_variable(ev)	(sndrv_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
+#define sndrv_seq_ev_is_varusr(ev)	(sndrv_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_VARUSR)
+
+/* time-stamp type */
+#define sndrv_seq_ev_timestamp_type(ev)	((ev)->flags & SNDRV_SEQ_TIME_STAMP_MASK)
+#define sndrv_seq_ev_is_tick(ev)		(sndrv_seq_ev_timestamp_type(ev) == SNDRV_SEQ_TIME_STAMP_TICK)
+#define sndrv_seq_ev_is_real(ev)		(sndrv_seq_ev_timestamp_type(ev) == SNDRV_SEQ_TIME_STAMP_REAL)
+
+/* time-mode type */
+#define sndrv_seq_ev_timemode_type(ev)	((ev)->flags & SNDRV_SEQ_TIME_MODE_MASK)
+#define sndrv_seq_ev_is_abstime(ev)	(sndrv_seq_ev_timemode_type(ev) == SNDRV_SEQ_TIME_MODE_ABS)
+#define sndrv_seq_ev_is_reltime(ev)	(sndrv_seq_ev_timemode_type(ev) == SNDRV_SEQ_TIME_MODE_REL)
+
+/* queue sync port */
+#define sndrv_seq_queue_sync_port(q)	((q) + 16)
+
+	/* system information */
+struct sndrv_seq_system_info {
+	int queues;			/* maximum queues count */
+	int clients;			/* maximum clients count */
+	int ports;			/* maximum ports per client */
+	int channels;			/* maximum channels per port */
+	int cur_clients;		/* current clients */
+	int cur_queues;			/* current queues */
+	char reserved[24];
+};
+
+
+	/* system running information */
+struct sndrv_seq_running_info {
+	unsigned char client;		/* client id */
+	unsigned char big_endian;	/* 1 = big-endian */
+	unsigned char cpu_mode;		/* 4 = 32bit, 8 = 64bit */
+	unsigned char pad;		/* reserved */
+	unsigned char reserved[12];
+};
+
+
+	/* known client numbers */
+#define SNDRV_SEQ_CLIENT_SYSTEM		0
+#define SNDRV_SEQ_CLIENT_DUMMY		62	/* dummy ports */
+#define SNDRV_SEQ_CLIENT_OSS		63	/* oss sequencer emulator */
+
+
+	/* client types */
+enum sndrv_seq_client_type {
+	NO_CLIENT       = 0,
+	USER_CLIENT     = 1,
+	KERNEL_CLIENT   = 2
+};
+                        
+	/* event filter flags */
+#define SNDRV_SEQ_FILTER_BROADCAST	(1<<0)	/* accept broadcast messages */
+#define SNDRV_SEQ_FILTER_MULTICAST	(1<<1)	/* accept multicast messages */
+#define SNDRV_SEQ_FILTER_BOUNCE		(1<<2)	/* accept bounce event in error */
+#define SNDRV_SEQ_FILTER_USE_EVENT	(1<<31)	/* use event filter */
+
+struct sndrv_seq_client_info {
+	int client;			/* client number to inquire */
+	enum sndrv_seq_client_type type;	/* client type */
+	char name[64];			/* client name */
+	unsigned int filter;		/* filter flags */
+	unsigned char multicast_filter[8]; /* multicast filter bitmap */
+	unsigned char event_filter[32];	/* event filter bitmap */
+	int num_ports;			/* RO: number of ports */
+	int event_lost;			/* number of lost events */
+	char reserved[64];		/* for future use */
+};
+
+
+/* client pool size */
+struct sndrv_seq_client_pool {
+	int client;			/* client number to inquire */
+	int output_pool;		/* outgoing (write) pool size */
+	int input_pool;			/* incoming (read) pool size */
+	int output_room;		/* minimum free pool size for select/blocking mode */
+	int output_free;		/* unused size */
+	int input_free;			/* unused size */
+	char reserved[64];
+};
+
+
+/* Remove events by specified criteria */
+
+#define SNDRV_SEQ_REMOVE_INPUT		(1<<0)	/* Flush input queues */
+#define SNDRV_SEQ_REMOVE_OUTPUT		(1<<1)	/* Flush output queues */
+#define SNDRV_SEQ_REMOVE_DEST		(1<<2)	/* Restrict by destination q:client:port */
+#define SNDRV_SEQ_REMOVE_DEST_CHANNEL	(1<<3)	/* Restrict by channel */
+#define SNDRV_SEQ_REMOVE_TIME_BEFORE	(1<<4)	/* Restrict to before time */
+#define SNDRV_SEQ_REMOVE_TIME_AFTER	(1<<5)	/* Restrict to time or after */
+#define SNDRV_SEQ_REMOVE_TIME_TICK	(1<<6)	/* Time is in ticks */
+#define SNDRV_SEQ_REMOVE_EVENT_TYPE	(1<<7)	/* Restrict to event type */
+#define SNDRV_SEQ_REMOVE_IGNORE_OFF 	(1<<8)	/* Do not flush off events */
+#define SNDRV_SEQ_REMOVE_TAG_MATCH 	(1<<9)	/* Restrict to events with given tag */
+
+struct sndrv_seq_remove_events {
+	unsigned int  remove_mode;	/* Flags that determine what gets removed */
+
+	union sndrv_seq_timestamp time;
+
+	unsigned char queue;	/* Queue for REMOVE_DEST */
+	struct sndrv_seq_addr dest;	/* Address for REMOVE_DEST */
+	unsigned char channel;	/* Channel for REMOVE_DEST */
+
+	int  type;	/* For REMOVE_EVENT_TYPE */
+	char  tag;	/* Tag for REMOVE_TAG */
+
+	int  reserved[10];	/* To allow for future binary compatibility */
+
+};
+
+
+	/* known port numbers */
+#define SNDRV_SEQ_PORT_SYSTEM_TIMER	0
+#define SNDRV_SEQ_PORT_SYSTEM_ANNOUNCE	1
+
+	/* port capabilities (32 bits) */
+#define SNDRV_SEQ_PORT_CAP_READ		(1<<0)	/* readable from this port */
+#define SNDRV_SEQ_PORT_CAP_WRITE	(1<<1)	/* writable to this port */
+
+#define SNDRV_SEQ_PORT_CAP_SYNC_READ	(1<<2)
+#define SNDRV_SEQ_PORT_CAP_SYNC_WRITE	(1<<3)
+
+#define SNDRV_SEQ_PORT_CAP_DUPLEX	(1<<4)
+
+#define SNDRV_SEQ_PORT_CAP_SUBS_READ	(1<<5)	/* allow read subscription */
+#define SNDRV_SEQ_PORT_CAP_SUBS_WRITE	(1<<6)	/* allow write subscription */
+#define SNDRV_SEQ_PORT_CAP_NO_EXPORT	(1<<7)	/* routing not allowed */
+
+	/* port type */
+#define SNDRV_SEQ_PORT_TYPE_SPECIFIC	(1<<0)	/* hardware specific */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC (1<<1)	/* generic MIDI device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GM	(1<<2)	/* General MIDI compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GS	(1<<3)	/* GS compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_XG	(1<<4)	/* XG compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_MT32	(1<<5)	/* MT-32 compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GM2	(1<<6)	/* General MIDI 2 compatible device */
+
+/* other standards...*/
+#define SNDRV_SEQ_PORT_TYPE_SYNTH	(1<<10)	/* Synth device (no MIDI compatible - direct wavetable) */
+#define SNDRV_SEQ_PORT_TYPE_DIRECT_SAMPLE (1<<11)	/* Sampling device (support sample download) */
+#define SNDRV_SEQ_PORT_TYPE_SAMPLE	(1<<12)	/* Sampling device (sample can be downloaded at any time) */
+/*...*/
+#define SNDRV_SEQ_PORT_TYPE_APPLICATION	(1<<20)	/* application (sequencer/editor) */
+
+/* misc. conditioning flags */
+#define SNDRV_SEQ_PORT_FLG_GIVEN_PORT	(1<<0)
+#define SNDRV_SEQ_PORT_FLG_TIMESTAMP	(1<<1)
+#define SNDRV_SEQ_PORT_FLG_TIME_REAL	(1<<2)
+
+struct sndrv_seq_port_info {
+	struct sndrv_seq_addr addr;	/* client/port numbers */
+	char name[64];			/* port name */
+
+	unsigned int capability;	/* port capability bits */
+	unsigned int type;		/* port type bits */
+	int midi_channels;		/* channels per MIDI port */
+	int midi_voices;		/* voices per MIDI port */
+	int synth_voices;		/* voices per SYNTH port */
+
+	int read_use;			/* R/O: subscribers for output (from this port) */
+	int write_use;			/* R/O: subscribers for input (to this port) */
+
+	void *kernel;			/* reserved for kernel use (must be NULL) */
+	unsigned int flags;		/* misc. conditioning */
+	unsigned char time_queue;	/* queue # for timestamping */
+	char reserved[59];		/* for future use */
+};
+
+
+/* queue flags */
+#define SNDRV_SEQ_QUEUE_FLG_SYNC	(1<<0)	/* sync enabled */
+
+/* queue information */
+struct sndrv_seq_queue_info {
+	int queue;		/* queue id */
+
+	/*
+	 *  security settings, only owner of this queue can start/stop timer
+	 *  etc. if the queue is locked for other clients
+	 */
+	int owner;		/* client id for owner of the queue */
+	unsigned locked:1;	/* timing queue locked for other queues */
+	char name[64];		/* name of this queue */
+	unsigned int flags;	/* flags */
+	char reserved[60];	/* for future use */
+
+};
+
+/* queue info/status */
+struct sndrv_seq_queue_status {
+	int queue;			/* queue id */
+	int events;			/* read-only - queue size */
+	sndrv_seq_tick_time_t tick;	/* current tick */
+	struct sndrv_seq_real_time time; /* current time */
+	int running;			/* running state of queue */
+	int flags;			/* various flags */
+	char reserved[64];		/* for the future */
+};
+
+
+/* queue tempo */
+struct sndrv_seq_queue_tempo {
+	int queue;			/* sequencer queue */
+	unsigned int tempo;		/* current tempo, us/tick */
+	int ppq;			/* time resolution, ticks/quarter */
+	unsigned int skew_value;	/* queue skew */
+	unsigned int skew_base;		/* queue skew base */
+	char reserved[24];		/* for the future */
+};
+
+
+/* sequencer timer sources */
+#define SNDRV_SEQ_TIMER_ALSA		0	/* ALSA timer */
+#define SNDRV_SEQ_TIMER_MIDI_CLOCK	1	/* Midi Clock (CLOCK event) */
+#define SNDRV_SEQ_TIMER_MIDI_TICK	2	/* Midi Timer Tick (TICK event) */
+
+/* queue timer info */
+struct sndrv_seq_queue_timer {
+	int queue;			/* sequencer queue */
+	int type;			/* source timer type */
+	union {
+		struct {
+			struct sndrv_timer_id id;	/* ALSA's timer ID */
+			unsigned int resolution;	/* resolution in Hz */
+		} alsa;
+	} u;
+	char reserved[64];		/* for the future use */
+};
+
+
+struct sndrv_seq_queue_client {
+	int queue;		/* sequencer queue */
+	int client;		/* sequencer client */
+	int used;		/* queue is used with this client
+				   (must be set for accepting events) */
+	/* per client watermarks */
+	char reserved[64];	/* for future use */
+};
+
+
+#define SNDRV_SEQ_PORT_SUBS_EXCLUSIVE	(1<<0)	/* exclusive connection */
+#define SNDRV_SEQ_PORT_SUBS_TIMESTAMP	(1<<1)
+#define SNDRV_SEQ_PORT_SUBS_TIME_REAL	(1<<2)
+
+struct sndrv_seq_port_subscribe {
+	struct sndrv_seq_addr sender;	/* sender address */
+	struct sndrv_seq_addr dest;	/* destination address */
+	unsigned int voices;		/* number of voices to be allocated (0 = don't care) */
+	unsigned int flags;		/* modes */
+	unsigned char queue;		/* input time-stamp queue (optional) */
+	unsigned char pad[3];		/* reserved */
+	char reserved[64];
+};
+
+/* type of query subscription */
+#define SNDRV_SEQ_QUERY_SUBS_READ	0
+#define SNDRV_SEQ_QUERY_SUBS_WRITE	1
+
+struct sndrv_seq_query_subs {
+	struct sndrv_seq_addr root;	/* client/port id to be searched */
+	int type;		/* READ or WRITE */
+	int index;		/* 0..N-1 */
+	int num_subs;		/* R/O: number of subscriptions on this port */
+	struct sndrv_seq_addr addr;	/* R/O: result */
+	unsigned char queue;	/* R/O: result */
+	unsigned int flags;	/* R/O: result */
+	char reserved[64];	/* for future use */
+};
+
+
+/*
+ *  Instrument abstraction layer
+ *     - based on events
+ */
+
+/* instrument types */
+#define SNDRV_SEQ_INSTR_ATYPE_DATA	0	/* instrument data */
+#define SNDRV_SEQ_INSTR_ATYPE_ALIAS	1	/* instrument alias */
+
+/* instrument ASCII identifiers */
+#define SNDRV_SEQ_INSTR_ID_DLS1		"DLS1"
+#define SNDRV_SEQ_INSTR_ID_DLS2		"DLS2"
+#define SNDRV_SEQ_INSTR_ID_SIMPLE	"Simple Wave"
+#define SNDRV_SEQ_INSTR_ID_SOUNDFONT	"SoundFont"
+#define SNDRV_SEQ_INSTR_ID_GUS_PATCH	"GUS Patch"
+#define SNDRV_SEQ_INSTR_ID_INTERWAVE	"InterWave FFFF"
+#define SNDRV_SEQ_INSTR_ID_OPL2_3	"OPL2/3 FM"
+#define SNDRV_SEQ_INSTR_ID_OPL4		"OPL4"
+
+/* instrument types */
+#define SNDRV_SEQ_INSTR_TYPE0_DLS1	(1<<0)	/* MIDI DLS v1 */
+#define SNDRV_SEQ_INSTR_TYPE0_DLS2	(1<<1)	/* MIDI DLS v2 */
+#define SNDRV_SEQ_INSTR_TYPE1_SIMPLE	(1<<0)	/* Simple Wave */
+#define SNDRV_SEQ_INSTR_TYPE1_SOUNDFONT	(1<<1)	/* EMU SoundFont */
+#define SNDRV_SEQ_INSTR_TYPE1_GUS_PATCH	(1<<2)	/* Gravis UltraSound Patch */
+#define SNDRV_SEQ_INSTR_TYPE1_INTERWAVE	(1<<3)	/* InterWave FFFF */
+#define SNDRV_SEQ_INSTR_TYPE2_OPL2_3	(1<<0)	/* Yamaha OPL2/3 FM */
+#define SNDRV_SEQ_INSTR_TYPE2_OPL4	(1<<1)	/* Yamaha OPL4 */
+
+/* put commands */
+#define SNDRV_SEQ_INSTR_PUT_CMD_CREATE	0
+#define SNDRV_SEQ_INSTR_PUT_CMD_REPLACE	1
+#define SNDRV_SEQ_INSTR_PUT_CMD_MODIFY	2
+#define SNDRV_SEQ_INSTR_PUT_CMD_ADD	3
+#define SNDRV_SEQ_INSTR_PUT_CMD_REMOVE	4
+
+/* get commands */
+#define SNDRV_SEQ_INSTR_GET_CMD_FULL	0
+#define SNDRV_SEQ_INSTR_GET_CMD_PARTIAL	1
+
+/* query flags */
+#define SNDRV_SEQ_INSTR_QUERY_FOLLOW_ALIAS (1<<0)
+
+/* free commands */
+#define SNDRV_SEQ_INSTR_FREE_CMD_ALL		0
+#define SNDRV_SEQ_INSTR_FREE_CMD_PRIVATE	1
+#define SNDRV_SEQ_INSTR_FREE_CMD_CLUSTER	2
+#define SNDRV_SEQ_INSTR_FREE_CMD_SINGLE		3
+
+/* size of ROM/RAM */
+typedef unsigned int sndrv_seq_instr_size_t;
+
+/* INSTR_INFO */
+
+struct sndrv_seq_instr_info {
+	int result;			/* operation result */
+	unsigned int formats[8];	/* bitmap of supported formats */
+	int ram_count;			/* count of RAM banks */
+	sndrv_seq_instr_size_t ram_sizes[16]; /* size of RAM banks */
+	int rom_count;			/* count of ROM banks */
+	sndrv_seq_instr_size_t rom_sizes[8]; /* size of ROM banks */
+	char reserved[128];
+};
+
+/* INSTR_STATUS */
+
+struct sndrv_seq_instr_status {
+	int result;			/* operation result */
+	sndrv_seq_instr_size_t free_ram[16]; /* free RAM in banks */
+	int instrument_count;		/* count of downloaded instruments */
+	char reserved[128];
+};
+
+/* INSTR_FORMAT_INFO */
+
+struct sndrv_seq_instr_format_info {
+	char format[16];		/* format identifier - SNDRV_SEQ_INSTR_ID_* */	
+	unsigned int len;		/* max data length (without this structure) */
+};
+
+struct sndrv_seq_instr_format_info_result {
+	int result;			/* operation result */
+	char format[16];		/* format identifier */
+	unsigned int len;		/* filled data length (without this structure) */
+};
+
+/* instrument data */
+struct sndrv_seq_instr_data {
+	char name[32];			/* instrument name */
+	char reserved[16];		/* for the future use */
+	int type;			/* instrument type */
+	union {
+		char format[16];	/* format identifier */
+		struct sndrv_seq_instr alias;
+	} data;
+};
+
+/* INSTR_PUT/GET, data are stored in one block (extended), header + data */
+
+struct sndrv_seq_instr_header {
+	union {
+		struct sndrv_seq_instr instr;
+		sndrv_seq_instr_cluster_t cluster;
+	} id;				/* instrument identifier */
+	unsigned int cmd;		/* get/put/free command */
+	unsigned int flags;		/* query flags (only for get) */
+	unsigned int len;		/* real instrument data length (without header) */
+	int result;			/* operation result */
+	char reserved[16];		/* for the future */
+	struct sndrv_seq_instr_data data; /* instrument data (for put/get result) */
+};
+
+/* INSTR_CLUSTER_SET */
+
+struct sndrv_seq_instr_cluster_set {
+	sndrv_seq_instr_cluster_t cluster; /* cluster identifier */
+	char name[32];			/* cluster name */
+	int priority;			/* cluster priority */
+	char reserved[64];		/* for the future use */
+};
+
+/* INSTR_CLUSTER_GET */
+
+struct sndrv_seq_instr_cluster_get {
+	sndrv_seq_instr_cluster_t cluster; /* cluster identifier */
+	char name[32];			/* cluster name */
+	int priority;			/* cluster priority */
+	char reserved[64];		/* for the future use */
+};
+
+/*
+ *  IOCTL commands
+ */
+
+#define SNDRV_SEQ_IOCTL_PVERSION	_IOR ('S', 0x00, int)
+#define SNDRV_SEQ_IOCTL_CLIENT_ID	_IOR ('S', 0x01, int)
+#define SNDRV_SEQ_IOCTL_SYSTEM_INFO	_IOWR('S', 0x02, struct sndrv_seq_system_info)
+#define SNDRV_SEQ_IOCTL_RUNNING_MODE	_IOWR('S', 0x03, struct sndrv_seq_running_info)
+
+#define SNDRV_SEQ_IOCTL_GET_CLIENT_INFO	_IOWR('S', 0x10, struct sndrv_seq_client_info)
+#define SNDRV_SEQ_IOCTL_SET_CLIENT_INFO	_IOW ('S', 0x11, struct sndrv_seq_client_info)
+
+#define SNDRV_SEQ_IOCTL_CREATE_PORT	_IOWR('S', 0x20, struct sndrv_seq_port_info)
+#define SNDRV_SEQ_IOCTL_DELETE_PORT	_IOW ('S', 0x21, struct sndrv_seq_port_info)
+#define SNDRV_SEQ_IOCTL_GET_PORT_INFO	_IOWR('S', 0x22, struct sndrv_seq_port_info)
+#define SNDRV_SEQ_IOCTL_SET_PORT_INFO	_IOW ('S', 0x23, struct sndrv_seq_port_info)
+
+#define SNDRV_SEQ_IOCTL_SUBSCRIBE_PORT	_IOW ('S', 0x30, struct sndrv_seq_port_subscribe)
+#define SNDRV_SEQ_IOCTL_UNSUBSCRIBE_PORT _IOW ('S', 0x31, struct sndrv_seq_port_subscribe)
+
+#define SNDRV_SEQ_IOCTL_CREATE_QUEUE	_IOWR('S', 0x32, struct sndrv_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_DELETE_QUEUE	_IOW ('S', 0x33, struct sndrv_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_INFO	_IOWR('S', 0x34, struct sndrv_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_INFO	_IOWR('S', 0x35, struct sndrv_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_NAMED_QUEUE	_IOWR('S', 0x36, struct sndrv_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_STATUS _IOWR('S', 0x40, struct sndrv_seq_queue_status)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_TEMPO	_IOWR('S', 0x41, struct sndrv_seq_queue_tempo)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_TEMPO	_IOW ('S', 0x42, struct sndrv_seq_queue_tempo)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_OWNER	_IOWR('S', 0x43, struct sndrv_seq_queue_owner)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_OWNER	_IOW ('S', 0x44, struct sndrv_seq_queue_owner)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_TIMER	_IOWR('S', 0x45, struct sndrv_seq_queue_timer)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_TIMER	_IOW ('S', 0x46, struct sndrv_seq_queue_timer)
+/* XXX
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_SYNC	_IOWR('S', 0x53, struct sndrv_seq_queue_sync)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_SYNC	_IOW ('S', 0x54, struct sndrv_seq_queue_sync)
+*/
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_CLIENT	_IOWR('S', 0x49, struct sndrv_seq_queue_client)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_CLIENT	_IOW ('S', 0x4a, struct sndrv_seq_queue_client)
+#define SNDRV_SEQ_IOCTL_GET_CLIENT_POOL	_IOWR('S', 0x4b, struct sndrv_seq_client_pool)
+#define SNDRV_SEQ_IOCTL_SET_CLIENT_POOL	_IOW ('S', 0x4c, struct sndrv_seq_client_pool)
+#define SNDRV_SEQ_IOCTL_REMOVE_EVENTS	_IOW ('S', 0x4e, struct sndrv_seq_remove_events)
+#define SNDRV_SEQ_IOCTL_QUERY_SUBS	_IOWR('S', 0x4f, struct sndrv_seq_query_subs)
+#define SNDRV_SEQ_IOCTL_GET_SUBSCRIPTION	_IOWR('S', 0x50, struct sndrv_seq_port_subscribe)
+#define SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT	_IOWR('S', 0x51, struct sndrv_seq_client_info)
+#define SNDRV_SEQ_IOCTL_QUERY_NEXT_PORT	_IOWR('S', 0x52, struct sndrv_seq_port_info)
+
+#endif /* __SOUND_ASEQUENCER_H */
diff --git a/include/sound/asound.h b/include/sound/asound.h
new file mode 100644
index 000000000000..a4d149f34541
--- /dev/null
+++ b/include/sound/asound.h
@@ -0,0 +1,927 @@
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2003 by Jaroslav Kysela <perex@suse.cz>,
+ *                             Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_ASOUND_H
+#define __SOUND_ASOUND_H
+
+#if defined(LINUX) || defined(__LINUX__) || defined(__linux__)
+
+#include <linux/ioctl.h>
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/byteorder.h>
+
+#ifdef  __LITTLE_ENDIAN
+#define SNDRV_LITTLE_ENDIAN
+#else
+#ifdef __BIG_ENDIAN
+#define SNDRV_BIG_ENDIAN
+#else
+#error "Unsupported endian..."
+#endif
+#endif
+
+#else /* !__KERNEL__ */
+
+#include <endian.h>
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define SNDRV_LITTLE_ENDIAN
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define SNDRV_BIG_ENDIAN
+#else
+#error "Unsupported endian..."
+#endif
+
+#endif /* __KERNEL **/
+
+#endif /* LINUX */
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#include <sys/types.h>
+#endif
+
+/*
+ *  protocol version
+ */
+
+#define SNDRV_PROTOCOL_VERSION(major, minor, subminor) (((major)<<16)|((minor)<<8)|(subminor))
+#define SNDRV_PROTOCOL_MAJOR(version) (((version)>>16)&0xffff)
+#define SNDRV_PROTOCOL_MINOR(version) (((version)>>8)&0xff)
+#define SNDRV_PROTOCOL_MICRO(version) ((version)&0xff)
+#define SNDRV_PROTOCOL_INCOMPATIBLE(kversion, uversion) \
+	(SNDRV_PROTOCOL_MAJOR(kversion) != SNDRV_PROTOCOL_MAJOR(uversion) || \
+	 (SNDRV_PROTOCOL_MAJOR(kversion) == SNDRV_PROTOCOL_MAJOR(uversion) && \
+	   SNDRV_PROTOCOL_MINOR(kversion) != SNDRV_PROTOCOL_MINOR(uversion)))
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+struct sndrv_aes_iec958 {
+	unsigned char status[24];	/* AES/IEC958 channel status bits */
+	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
+	unsigned char pad;		/* nothing */
+	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *      Section for driver hardware dependent interface - /dev/snd/hw?      *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_HWDEP_VERSION		SNDRV_PROTOCOL_VERSION(1, 0, 1)
+
+enum sndrv_hwdep_iface {
+	SNDRV_HWDEP_IFACE_OPL2 = 0,
+	SNDRV_HWDEP_IFACE_OPL3,
+	SNDRV_HWDEP_IFACE_OPL4,
+	SNDRV_HWDEP_IFACE_SB16CSP,	/* Creative Signal Processor */
+	SNDRV_HWDEP_IFACE_EMU10K1,	/* FX8010 processor in EMU10K1 chip */
+	SNDRV_HWDEP_IFACE_YSS225,	/* Yamaha FX processor */
+	SNDRV_HWDEP_IFACE_ICS2115,	/* Wavetable synth */
+	SNDRV_HWDEP_IFACE_SSCAPE,	/* Ensoniq SoundScape ISA card (MC68EC000) */
+	SNDRV_HWDEP_IFACE_VX,		/* Digigram VX cards */
+	SNDRV_HWDEP_IFACE_MIXART,	/* Digigram miXart cards */
+	SNDRV_HWDEP_IFACE_USX2Y,	/* Tascam US122, US224 & US428 usb */
+	SNDRV_HWDEP_IFACE_EMUX_WAVETABLE, /* EmuX wavetable */	
+	SNDRV_HWDEP_IFACE_BLUETOOTH,	/* Bluetooth audio */
+	SNDRV_HWDEP_IFACE_USX2Y_PCM,	/* Tascam US122, US224 & US428 rawusb pcm */
+	SNDRV_HWDEP_IFACE_PCXHR,	/* Digigram PCXHR */
+
+	/* Don't forget to change the following: */
+	SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_PCXHR
+};
+
+struct sndrv_hwdep_info {
+	unsigned int device;		/* WR: device number */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* hwdep name */
+	enum sndrv_hwdep_iface iface;	/* hwdep interface */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+/* generic DSP loader */
+struct sndrv_hwdep_dsp_status {
+	unsigned int version;		/* R: driver-specific version */
+	unsigned char id[32];		/* R: driver-specific ID string */
+	unsigned int num_dsps;		/* R: number of DSP images to transfer */
+	unsigned int dsp_loaded;	/* R: bit flags indicating the loaded DSPs */
+	unsigned int chip_ready;	/* R: 1 = initialization finished */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct sndrv_hwdep_dsp_image {
+	unsigned int index;		/* W: DSP index */
+	unsigned char name[64];		/* W: ID (e.g. file name) */
+	unsigned char __user *image;	/* W: binary image */
+	size_t length;			/* W: size of image in bytes */
+	unsigned long driver_data;	/* W: driver-specific data */
+};
+
+enum {
+	SNDRV_HWDEP_IOCTL_PVERSION = _IOR ('H', 0x00, int),
+	SNDRV_HWDEP_IOCTL_INFO = _IOR ('H', 0x01, struct sndrv_hwdep_info),
+	SNDRV_HWDEP_IOCTL_DSP_STATUS = _IOR('H', 0x02, struct sndrv_hwdep_dsp_status),
+	SNDRV_HWDEP_IOCTL_DSP_LOAD   = _IOW('H', 0x03, struct sndrv_hwdep_dsp_image)
+};
+
+/*****************************************************************************
+ *                                                                           *
+ *             Digital Audio (PCM) interface - /dev/snd/pcm??                *
+ *                                                                           *
+ *****************************************************************************/
+
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 7)
+
+typedef unsigned long sndrv_pcm_uframes_t;
+typedef long sndrv_pcm_sframes_t;
+
+enum sndrv_pcm_class {
+	SNDRV_PCM_CLASS_GENERIC = 0,	/* standard mono or stereo device */
+	SNDRV_PCM_CLASS_MULTI,		/* multichannel device */
+	SNDRV_PCM_CLASS_MODEM,		/* software modem class */
+	SNDRV_PCM_CLASS_DIGITIZER,	/* digitizer class */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_CLASS_LAST = SNDRV_PCM_CLASS_DIGITIZER,
+};
+
+enum sndrv_pcm_subclass {
+	SNDRV_PCM_SUBCLASS_GENERIC_MIX = 0, /* mono or stereo subdevices are mixed together */
+	SNDRV_PCM_SUBCLASS_MULTI_MIX,	/* multichannel subdevices are mixed together */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_SUBCLASS_LAST = SNDRV_PCM_SUBCLASS_MULTI_MIX,
+};
+
+enum sndrv_pcm_stream {
+	SNDRV_PCM_STREAM_PLAYBACK = 0,
+	SNDRV_PCM_STREAM_CAPTURE,
+	SNDRV_PCM_STREAM_LAST = SNDRV_PCM_STREAM_CAPTURE,
+};
+
+enum sndrv_pcm_access {
+	SNDRV_PCM_ACCESS_MMAP_INTERLEAVED = 0,	/* interleaved mmap */
+	SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED, 	/* noninterleaved mmap */
+	SNDRV_PCM_ACCESS_MMAP_COMPLEX,		/* complex mmap */
+	SNDRV_PCM_ACCESS_RW_INTERLEAVED,	/* readi/writei */
+	SNDRV_PCM_ACCESS_RW_NONINTERLEAVED,	/* readn/writen */
+	SNDRV_PCM_ACCESS_LAST = SNDRV_PCM_ACCESS_RW_NONINTERLEAVED,
+};
+
+enum sndrv_pcm_format {
+	SNDRV_PCM_FORMAT_S8 = 0,
+	SNDRV_PCM_FORMAT_U8,
+	SNDRV_PCM_FORMAT_S16_LE,
+	SNDRV_PCM_FORMAT_S16_BE,
+	SNDRV_PCM_FORMAT_U16_LE,
+	SNDRV_PCM_FORMAT_U16_BE,
+	SNDRV_PCM_FORMAT_S24_LE,	/* low three bytes */
+	SNDRV_PCM_FORMAT_S24_BE,	/* low three bytes */
+	SNDRV_PCM_FORMAT_U24_LE,	/* low three bytes */
+	SNDRV_PCM_FORMAT_U24_BE,	/* low three bytes */
+	SNDRV_PCM_FORMAT_S32_LE,
+	SNDRV_PCM_FORMAT_S32_BE,
+	SNDRV_PCM_FORMAT_U32_LE,
+	SNDRV_PCM_FORMAT_U32_BE,
+	SNDRV_PCM_FORMAT_FLOAT_LE,	/* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+	SNDRV_PCM_FORMAT_FLOAT_BE,	/* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+	SNDRV_PCM_FORMAT_FLOAT64_LE,	/* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+	SNDRV_PCM_FORMAT_FLOAT64_BE,	/* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE,	/* IEC-958 subframe, Little Endian */
+	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE,	/* IEC-958 subframe, Big Endian */
+	SNDRV_PCM_FORMAT_MU_LAW,
+	SNDRV_PCM_FORMAT_A_LAW,
+	SNDRV_PCM_FORMAT_IMA_ADPCM,
+	SNDRV_PCM_FORMAT_MPEG,
+	SNDRV_PCM_FORMAT_GSM,
+	SNDRV_PCM_FORMAT_SPECIAL = 31,
+	SNDRV_PCM_FORMAT_S24_3LE = 32,	/* in three bytes */
+	SNDRV_PCM_FORMAT_S24_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U24_3LE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U24_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_S20_3LE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_S20_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U20_3LE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U20_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_S18_3LE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_S18_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U18_3LE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_U18_3BE,	/* in three bytes */
+	SNDRV_PCM_FORMAT_LAST = SNDRV_PCM_FORMAT_U18_3BE,
+
+#ifdef SNDRV_LITTLE_ENDIAN
+	SNDRV_PCM_FORMAT_S16 = SNDRV_PCM_FORMAT_S16_LE,
+	SNDRV_PCM_FORMAT_U16 = SNDRV_PCM_FORMAT_U16_LE,
+	SNDRV_PCM_FORMAT_S24 = SNDRV_PCM_FORMAT_S24_LE,
+	SNDRV_PCM_FORMAT_U24 = SNDRV_PCM_FORMAT_U24_LE,
+	SNDRV_PCM_FORMAT_S32 = SNDRV_PCM_FORMAT_S32_LE,
+	SNDRV_PCM_FORMAT_U32 = SNDRV_PCM_FORMAT_U32_LE,
+	SNDRV_PCM_FORMAT_FLOAT = SNDRV_PCM_FORMAT_FLOAT_LE,
+	SNDRV_PCM_FORMAT_FLOAT64 = SNDRV_PCM_FORMAT_FLOAT64_LE,
+	SNDRV_PCM_FORMAT_IEC958_SUBFRAME = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE,
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+	SNDRV_PCM_FORMAT_S16 = SNDRV_PCM_FORMAT_S16_BE,
+	SNDRV_PCM_FORMAT_U16 = SNDRV_PCM_FORMAT_U16_BE,
+	SNDRV_PCM_FORMAT_S24 = SNDRV_PCM_FORMAT_S24_BE,
+	SNDRV_PCM_FORMAT_U24 = SNDRV_PCM_FORMAT_U24_BE,
+	SNDRV_PCM_FORMAT_S32 = SNDRV_PCM_FORMAT_S32_BE,
+	SNDRV_PCM_FORMAT_U32 = SNDRV_PCM_FORMAT_U32_BE,
+	SNDRV_PCM_FORMAT_FLOAT = SNDRV_PCM_FORMAT_FLOAT_BE,
+	SNDRV_PCM_FORMAT_FLOAT64 = SNDRV_PCM_FORMAT_FLOAT64_BE,
+	SNDRV_PCM_FORMAT_IEC958_SUBFRAME = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE,
+#endif
+};
+
+enum sndrv_pcm_subformat {
+	SNDRV_PCM_SUBFORMAT_STD = 0,
+	SNDRV_PCM_SUBFORMAT_LAST = SNDRV_PCM_SUBFORMAT_STD,
+};
+
+#define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
+#define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
+#define SNDRV_PCM_INFO_DOUBLE		0x00000004	/* Double buffering needed for PCM start/stop */
+#define SNDRV_PCM_INFO_BATCH		0x00000010	/* double buffering */
+#define SNDRV_PCM_INFO_INTERLEAVED	0x00000100	/* channels are interleaved */
+#define SNDRV_PCM_INFO_NONINTERLEAVED	0x00000200	/* channels are not interleaved */
+#define SNDRV_PCM_INFO_COMPLEX		0x00000400	/* complex frame organization (mmap only) */
+#define SNDRV_PCM_INFO_BLOCK_TRANSFER	0x00010000	/* hardware transfer block of samples */
+#define SNDRV_PCM_INFO_OVERRANGE	0x00020000	/* hardware supports ADC (capture) overrange detection */
+#define SNDRV_PCM_INFO_RESUME		0x00040000	/* hardware supports stream resume after suspend */
+#define SNDRV_PCM_INFO_PAUSE		0x00080000	/* pause ioctl is supported */
+#define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
+#define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
+#define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+
+enum sndrv_pcm_state {
+	SNDRV_PCM_STATE_OPEN = 0,	/* stream is open */
+	SNDRV_PCM_STATE_SETUP,		/* stream has a setup */
+	SNDRV_PCM_STATE_PREPARED,	/* stream is ready to start */
+	SNDRV_PCM_STATE_RUNNING,	/* stream is running */
+	SNDRV_PCM_STATE_XRUN,		/* stream reached an xrun */
+	SNDRV_PCM_STATE_DRAINING,	/* stream is draining */
+	SNDRV_PCM_STATE_PAUSED,		/* stream is paused */
+	SNDRV_PCM_STATE_SUSPENDED,	/* hardware is suspended */
+	SNDRV_PCM_STATE_DISCONNECTED,	/* hardware is disconnected */
+	SNDRV_PCM_STATE_LAST = SNDRV_PCM_STATE_DISCONNECTED,
+};
+
+enum {
+	SNDRV_PCM_MMAP_OFFSET_DATA = 0x00000000,
+	SNDRV_PCM_MMAP_OFFSET_STATUS = 0x80000000,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL = 0x81000000,
+};
+
+union sndrv_pcm_sync_id {
+	unsigned char id[16];
+	unsigned short id16[8];
+	unsigned int id32[4];
+};
+
+struct sndrv_pcm_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	enum sndrv_pcm_stream stream;	/* RO/WR (control): stream number */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of this device */
+	unsigned char subname[32];	/* subdevice name */
+	enum sndrv_pcm_class dev_class;	/* SNDRV_PCM_CLASS_* */
+	enum sndrv_pcm_subclass dev_subclass; /* SNDRV_PCM_SUBCLASS_* */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	union sndrv_pcm_sync_id sync;	/* hardware synchronization ID */
+	unsigned char reserved[64];	/* reserved for future... */
+};
+
+enum sndrv_pcm_hw_param {
+	SNDRV_PCM_HW_PARAM_ACCESS = 0,	/* Access type */
+	SNDRV_PCM_HW_PARAM_FIRST_MASK = SNDRV_PCM_HW_PARAM_ACCESS,
+	SNDRV_PCM_HW_PARAM_FORMAT,	/* Format */
+	SNDRV_PCM_HW_PARAM_SUBFORMAT,	/* Subformat */
+	SNDRV_PCM_HW_PARAM_LAST_MASK = SNDRV_PCM_HW_PARAM_SUBFORMAT,
+
+	SNDRV_PCM_HW_PARAM_SAMPLE_BITS = 8, /* Bits per sample */
+	SNDRV_PCM_HW_PARAM_FIRST_INTERVAL = SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+	SNDRV_PCM_HW_PARAM_FRAME_BITS,	/* Bits per frame */
+	SNDRV_PCM_HW_PARAM_CHANNELS,	/* Channels */
+	SNDRV_PCM_HW_PARAM_RATE,	/* Approx rate */
+	SNDRV_PCM_HW_PARAM_PERIOD_TIME,	/* Approx distance between interrupts
+					   in us */
+	SNDRV_PCM_HW_PARAM_PERIOD_SIZE,	/* Approx frames between interrupts */
+	SNDRV_PCM_HW_PARAM_PERIOD_BYTES, /* Approx bytes between interrupts */
+	SNDRV_PCM_HW_PARAM_PERIODS,	/* Approx interrupts per buffer */
+	SNDRV_PCM_HW_PARAM_BUFFER_TIME,	/* Approx duration of buffer in us */
+	SNDRV_PCM_HW_PARAM_BUFFER_SIZE,	/* Size of buffer in frames */
+	SNDRV_PCM_HW_PARAM_BUFFER_BYTES, /* Size of buffer in bytes */
+	SNDRV_PCM_HW_PARAM_TICK_TIME,	/* Approx tick duration in us */
+	SNDRV_PCM_HW_PARAM_LAST_INTERVAL = SNDRV_PCM_HW_PARAM_TICK_TIME
+};
+
+#define SNDRV_PCM_HW_PARAMS_RUNTIME		(1<<0)
+
+struct sndrv_interval {
+	unsigned int min, max;
+	unsigned int openmin:1,
+		     openmax:1,
+		     integer:1,
+		     empty:1;
+};
+
+#define SNDRV_MASK_MAX	256
+
+struct sndrv_mask {
+	u_int32_t bits[(SNDRV_MASK_MAX+31)/32];
+};
+
+struct sndrv_pcm_hw_params {
+	unsigned int flags;
+	struct sndrv_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK - 
+			       SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	struct sndrv_mask mres[5];	/* reserved masks */
+	struct sndrv_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+				        SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	struct sndrv_interval ires[9];	/* reserved intervals */
+	unsigned int rmask;		/* W: requested masks */
+	unsigned int cmask;		/* R: changed masks */
+	unsigned int info;		/* R: Info flags for returned setup */
+	unsigned int msbits;		/* R: used most significant bits */
+	unsigned int rate_num;		/* R: rate numerator */
+	unsigned int rate_den;		/* R: rate denominator */
+	sndrv_pcm_uframes_t fifo_size;	/* R: chip FIFO size in frames */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+enum sndrv_pcm_tstamp {
+	SNDRV_PCM_TSTAMP_NONE = 0,
+	SNDRV_PCM_TSTAMP_MMAP,
+	SNDRV_PCM_TSTAMP_LAST = SNDRV_PCM_TSTAMP_MMAP,
+};
+
+struct sndrv_pcm_sw_params {
+	enum sndrv_pcm_tstamp tstamp_mode;	/* timestamp mode */
+	unsigned int period_step;
+	unsigned int sleep_min;			/* min ticks to sleep */
+	sndrv_pcm_uframes_t avail_min;		/* min avail frames for wakeup */
+	sndrv_pcm_uframes_t xfer_align;		/* xfer size need to be a multiple */
+	sndrv_pcm_uframes_t start_threshold;	/* min hw_avail frames for automatic start */
+	sndrv_pcm_uframes_t stop_threshold;	/* min avail frames for automatic stop */
+	sndrv_pcm_uframes_t silence_threshold;	/* min distance from noise for silence filling */
+	sndrv_pcm_uframes_t silence_size;	/* silence block size */
+	sndrv_pcm_uframes_t boundary;		/* pointers wrap point */
+	unsigned char reserved[64];		/* reserved for future */
+};
+
+struct sndrv_pcm_channel_info {
+	unsigned int channel;
+	off_t offset;			/* mmap offset */
+	unsigned int first;		/* offset to first sample in bits */
+	unsigned int step;		/* samples distance in bits */
+};
+
+struct sndrv_pcm_status {
+	enum sndrv_pcm_state state;	/* stream state */
+	struct timespec trigger_tstamp;	/* time when stream was started/stopped/paused */
+	struct timespec tstamp;		/* reference timestamp */
+	sndrv_pcm_uframes_t appl_ptr;	/* appl ptr */
+	sndrv_pcm_uframes_t hw_ptr;	/* hw ptr */
+	sndrv_pcm_sframes_t delay;	/* current delay in frames */
+	sndrv_pcm_uframes_t avail;	/* number of frames available */
+	sndrv_pcm_uframes_t avail_max;	/* max frames available on hw since last status */
+	sndrv_pcm_uframes_t overrange;	/* count of ADC (capture) overrange detections from last status */
+	enum sndrv_pcm_state suspended_state; /* suspended stream state */
+	unsigned char reserved[60];	/* must be filled with zero */
+};
+
+struct sndrv_pcm_mmap_status {
+	enum sndrv_pcm_state state;	/* RO: state - SNDRV_PCM_STATE_XXXX */
+	int pad1;			/* Needed for 64 bit alignment */
+	sndrv_pcm_uframes_t hw_ptr;	/* RO: hw ptr (0...boundary-1) */
+	struct timespec tstamp;		/* Timestamp */
+	enum sndrv_pcm_state suspended_state; /* RO: suspended stream state */
+};
+
+struct sndrv_pcm_mmap_control {
+	sndrv_pcm_uframes_t appl_ptr;	/* RW: appl ptr (0...boundary-1) */
+	sndrv_pcm_uframes_t avail_min;	/* RW: min available frames for wakeup */
+};
+
+#define SNDRV_PCM_SYNC_PTR_HWSYNC	(1<<0)	/* execute hwsync */
+#define SNDRV_PCM_SYNC_PTR_APPL		(1<<1)	/* get appl_ptr from driver (r/w op) */
+#define SNDRV_PCM_SYNC_PTR_AVAIL_MIN	(1<<2)	/* get avail_min from driver */
+
+struct sndrv_pcm_sync_ptr {
+	unsigned int flags;
+	union {
+		struct sndrv_pcm_mmap_status status;
+		unsigned char reserved[64];
+	} s;
+	union {
+		struct sndrv_pcm_mmap_control control;
+		unsigned char reserved[64];
+	} c;
+};
+
+struct sndrv_xferi {
+	sndrv_pcm_sframes_t result;
+	void __user *buf;
+	sndrv_pcm_uframes_t frames;
+};
+
+struct sndrv_xfern {
+	sndrv_pcm_sframes_t result;
+	void __user * __user *bufs;
+	sndrv_pcm_uframes_t frames;
+};
+
+enum {
+	SNDRV_PCM_IOCTL_PVERSION = _IOR('A', 0x00, int),
+	SNDRV_PCM_IOCTL_INFO = _IOR('A', 0x01, struct sndrv_pcm_info),
+	SNDRV_PCM_IOCTL_TSTAMP = _IOW('A', 0x02, int),
+	SNDRV_PCM_IOCTL_HW_REFINE = _IOWR('A', 0x10, struct sndrv_pcm_hw_params),
+	SNDRV_PCM_IOCTL_HW_PARAMS = _IOWR('A', 0x11, struct sndrv_pcm_hw_params),
+	SNDRV_PCM_IOCTL_HW_FREE = _IO('A', 0x12),
+	SNDRV_PCM_IOCTL_SW_PARAMS = _IOWR('A', 0x13, struct sndrv_pcm_sw_params),
+	SNDRV_PCM_IOCTL_STATUS = _IOR('A', 0x20, struct sndrv_pcm_status),
+	SNDRV_PCM_IOCTL_DELAY = _IOR('A', 0x21, sndrv_pcm_sframes_t),
+	SNDRV_PCM_IOCTL_HWSYNC = _IO('A', 0x22),
+	SNDRV_PCM_IOCTL_SYNC_PTR = _IOWR('A', 0x23, struct sndrv_pcm_sync_ptr),
+	SNDRV_PCM_IOCTL_CHANNEL_INFO = _IOR('A', 0x32, struct sndrv_pcm_channel_info),
+	SNDRV_PCM_IOCTL_PREPARE = _IO('A', 0x40),
+	SNDRV_PCM_IOCTL_RESET = _IO('A', 0x41),
+	SNDRV_PCM_IOCTL_START = _IO('A', 0x42),
+	SNDRV_PCM_IOCTL_DROP = _IO('A', 0x43),
+	SNDRV_PCM_IOCTL_DRAIN = _IO('A', 0x44),
+	SNDRV_PCM_IOCTL_PAUSE = _IOW('A', 0x45, int),
+	SNDRV_PCM_IOCTL_REWIND = _IOW('A', 0x46, sndrv_pcm_uframes_t),
+	SNDRV_PCM_IOCTL_RESUME = _IO('A', 0x47),
+	SNDRV_PCM_IOCTL_XRUN = _IO('A', 0x48),
+	SNDRV_PCM_IOCTL_FORWARD = _IOW('A', 0x49, sndrv_pcm_uframes_t),
+	SNDRV_PCM_IOCTL_WRITEI_FRAMES = _IOW('A', 0x50, struct sndrv_xferi),
+	SNDRV_PCM_IOCTL_READI_FRAMES = _IOR('A', 0x51, struct sndrv_xferi),
+	SNDRV_PCM_IOCTL_WRITEN_FRAMES = _IOW('A', 0x52, struct sndrv_xfern),
+	SNDRV_PCM_IOCTL_READN_FRAMES = _IOR('A', 0x53, struct sndrv_xfern),
+	SNDRV_PCM_IOCTL_LINK = _IOW('A', 0x60, int),
+	SNDRV_PCM_IOCTL_UNLINK = _IO('A', 0x61),
+};
+
+/* Trick to make alsa-lib/acinclude.m4 happy */
+#define SNDRV_PCM_IOCTL_REWIND SNDRV_PCM_IOCTL_REWIND
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ *  Raw MIDI section - /dev/snd/midi??
+ */
+
+#define SNDRV_RAWMIDI_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 0)
+
+enum sndrv_rawmidi_stream {
+	SNDRV_RAWMIDI_STREAM_OUTPUT = 0,
+	SNDRV_RAWMIDI_STREAM_INPUT,
+	SNDRV_RAWMIDI_STREAM_LAST = SNDRV_RAWMIDI_STREAM_INPUT,
+};
+
+#define SNDRV_RAWMIDI_INFO_OUTPUT		0x00000001
+#define SNDRV_RAWMIDI_INFO_INPUT		0x00000002
+#define SNDRV_RAWMIDI_INFO_DUPLEX		0x00000004
+
+struct sndrv_rawmidi_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	enum sndrv_rawmidi_stream stream; /* WR: stream */
+	int card;			/* R: card number */
+	unsigned int flags;		/* SNDRV_RAWMIDI_INFO_XXXX */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of device */
+	unsigned char subname[32];	/* name of active or selected subdevice */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	unsigned char reserved[64];	/* reserved for future use */
+};
+
+struct sndrv_rawmidi_params {
+	enum sndrv_rawmidi_stream stream;
+	size_t buffer_size;		/* queue size in bytes */
+	size_t avail_min;		/* minimum avail bytes for wakeup */
+	unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct sndrv_rawmidi_status {
+	enum sndrv_rawmidi_stream stream;
+	struct timespec tstamp;		/* Timestamp */
+	size_t avail;			/* available bytes */
+	size_t xruns;			/* count of overruns since last status (in bytes) */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+enum {
+	SNDRV_RAWMIDI_IOCTL_PVERSION = _IOR('W', 0x00, int),
+	SNDRV_RAWMIDI_IOCTL_INFO = _IOR('W', 0x01, struct sndrv_rawmidi_info),
+	SNDRV_RAWMIDI_IOCTL_PARAMS = _IOWR('W', 0x10, struct sndrv_rawmidi_params),
+	SNDRV_RAWMIDI_IOCTL_STATUS = _IOWR('W', 0x20, struct sndrv_rawmidi_status),
+	SNDRV_RAWMIDI_IOCTL_DROP = _IOW('W', 0x30, int),
+	SNDRV_RAWMIDI_IOCTL_DRAIN = _IOW('W', 0x31, int),
+};
+
+/*
+ *  Timer section - /dev/snd/timer
+ */
+
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 2)
+
+enum sndrv_timer_class {
+	SNDRV_TIMER_CLASS_NONE = -1,
+	SNDRV_TIMER_CLASS_SLAVE = 0,
+	SNDRV_TIMER_CLASS_GLOBAL,
+	SNDRV_TIMER_CLASS_CARD,
+	SNDRV_TIMER_CLASS_PCM,
+	SNDRV_TIMER_CLASS_LAST = SNDRV_TIMER_CLASS_PCM,
+};
+
+/* slave timer classes */
+enum sndrv_timer_slave_class {
+	SNDRV_TIMER_SCLASS_NONE = 0,
+	SNDRV_TIMER_SCLASS_APPLICATION,
+	SNDRV_TIMER_SCLASS_SEQUENCER,		/* alias */
+	SNDRV_TIMER_SCLASS_OSS_SEQUENCER,	/* alias */
+	SNDRV_TIMER_SCLASS_LAST = SNDRV_TIMER_SCLASS_OSS_SEQUENCER,
+};
+
+/* global timers (device member) */
+#define SNDRV_TIMER_GLOBAL_SYSTEM	0
+#define SNDRV_TIMER_GLOBAL_RTC		1
+#define SNDRV_TIMER_GLOBAL_HPET		2
+
+/* info flags */
+#define SNDRV_TIMER_FLG_SLAVE		(1<<0)	/* cannot be controlled */
+
+struct sndrv_timer_id {
+	enum sndrv_timer_class dev_class;	
+	enum sndrv_timer_slave_class dev_sclass;
+	int card;
+	int device;
+	int subdevice;
+};
+
+struct sndrv_timer_ginfo {
+	struct sndrv_timer_id tid;	/* requested timer ID */
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identification */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned long resolution_min;	/* minimal period resolution in ns */
+	unsigned long resolution_max;	/* maximal period resolution in ns */
+	unsigned int clients;		/* active timer clients */
+	unsigned char reserved[32];
+};
+
+struct sndrv_timer_gparams {
+	struct sndrv_timer_id tid;	/* requested timer ID */
+	unsigned long period_num;	/* requested precise period duration (in seconds) - numerator */
+	unsigned long period_den;	/* requested precise period duration (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct sndrv_timer_gstatus {
+	struct sndrv_timer_id tid;	/* requested timer ID */
+	unsigned long resolution;	/* current period resolution in ns */
+	unsigned long resolution_num;	/* precise current period resolution (in seconds) - numerator */
+	unsigned long resolution_den;	/* precise current period resolution (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct sndrv_timer_select {
+	struct sndrv_timer_id id;	/* bind to timer ID */
+	unsigned char reserved[32];	/* reserved */
+};
+
+struct sndrv_timer_info {
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identificator */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_PSFLG_AUTO		(1<<0)	/* auto start, otherwise one-shot */
+#define SNDRV_TIMER_PSFLG_EXCLUSIVE	(1<<1)	/* exclusive use, precise start/stop/pause/continue */
+#define SNDRV_TIMER_PSFLG_EARLY_EVENT	(1<<2)	/* write early event to the poll queue */
+
+struct sndrv_timer_params {
+	unsigned int flags;		/* flags - SNDRV_MIXER_PSFLG_* */
+	unsigned int ticks;		/* requested resolution in ticks */
+	unsigned int queue_size;	/* total size of queue (32-1024) */
+	unsigned int reserved0;		/* reserved, was: failure locations */
+	unsigned int filter;		/* event filter (bitmask of SNDRV_TIMER_EVENT_*) */
+	unsigned char reserved[60];	/* reserved */
+};
+
+struct sndrv_timer_status {
+	struct timespec tstamp;		/* Timestamp - last update */
+	unsigned int resolution;	/* current period resolution in ns */
+	unsigned int lost;		/* counter of master tick lost */
+	unsigned int overrun;		/* count of read queue overruns */
+	unsigned int queue;		/* used queue size */
+	unsigned char reserved[64];	/* reserved */
+};
+
+enum {
+	SNDRV_TIMER_IOCTL_PVERSION = _IOR('T', 0x00, int),
+	SNDRV_TIMER_IOCTL_NEXT_DEVICE = _IOWR('T', 0x01, struct sndrv_timer_id),
+	SNDRV_TIMER_IOCTL_TREAD = _IOW('T', 0x02, int),
+	SNDRV_TIMER_IOCTL_GINFO = _IOWR('T', 0x03, struct sndrv_timer_ginfo),
+	SNDRV_TIMER_IOCTL_GPARAMS = _IOW('T', 0x04, struct sndrv_timer_gparams),
+	SNDRV_TIMER_IOCTL_GSTATUS = _IOWR('T', 0x05, struct sndrv_timer_gstatus),
+	SNDRV_TIMER_IOCTL_SELECT = _IOW('T', 0x10, struct sndrv_timer_select),
+	SNDRV_TIMER_IOCTL_INFO = _IOR('T', 0x11, struct sndrv_timer_info),
+	SNDRV_TIMER_IOCTL_PARAMS = _IOW('T', 0x12, struct sndrv_timer_params),
+	SNDRV_TIMER_IOCTL_STATUS = _IOR('T', 0x14, struct sndrv_timer_status),
+	SNDRV_TIMER_IOCTL_START = _IO('T', 0x20),
+	SNDRV_TIMER_IOCTL_STOP = _IO('T', 0x21),
+	SNDRV_TIMER_IOCTL_CONTINUE = _IO('T', 0x22),
+	SNDRV_TIMER_IOCTL_PAUSE = _IO('T', 0x23),
+};
+
+struct sndrv_timer_read {
+	unsigned int resolution;
+	unsigned int ticks;
+};
+
+enum sndrv_timer_event {
+	SNDRV_TIMER_EVENT_RESOLUTION = 0,	/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_TICK,			/* val = ticks */
+	SNDRV_TIMER_EVENT_START,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_STOP,			/* val = 0 */
+	SNDRV_TIMER_EVENT_CONTINUE,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_PAUSE,		/* val = 0 */
+	SNDRV_TIMER_EVENT_EARLY,		/* val = 0, early event */
+	/* master timer events for slave timer instances */
+	SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10,
+	SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10,
+	SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10,
+	SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10,
+};
+
+struct sndrv_timer_tread {
+	enum sndrv_timer_event event;
+	struct timespec tstamp;
+	unsigned int val;
+};
+
+/****************************************************************************
+ *                                                                          *
+ *        Section for driver control interface - /dev/snd/control?          *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 3)
+
+struct sndrv_ctl_card_info {
+	int card;			/* card number */
+	int pad;			/* reserved for future (was type) */
+	unsigned char id[16];		/* ID of card (user selectable) */
+	unsigned char driver[16];	/* Driver name */
+	unsigned char name[32];		/* Short name of soundcard */
+	unsigned char longname[80];	/* name + info text about soundcard */
+	unsigned char reserved_[16];	/* reserved for future (was ID of mixer) */
+	unsigned char mixername[80];	/* visual mixer identification */
+	unsigned char components[80];	/* card components / fine identification, delimited with one space (AC97 etc..) */
+	unsigned char reserved[48];	/* reserved for future */
+};
+
+enum sndrv_ctl_elem_type {
+	SNDRV_CTL_ELEM_TYPE_NONE = 0,		/* invalid */
+	SNDRV_CTL_ELEM_TYPE_BOOLEAN,		/* boolean type */
+	SNDRV_CTL_ELEM_TYPE_INTEGER,		/* integer type */
+	SNDRV_CTL_ELEM_TYPE_ENUMERATED,		/* enumerated type */
+	SNDRV_CTL_ELEM_TYPE_BYTES,		/* byte array */
+	SNDRV_CTL_ELEM_TYPE_IEC958,		/* IEC958 (S/PDIF) setup */
+	SNDRV_CTL_ELEM_TYPE_INTEGER64,		/* 64-bit integer type */
+	SNDRV_CTL_ELEM_TYPE_LAST = SNDRV_CTL_ELEM_TYPE_INTEGER64,
+};
+
+enum sndrv_ctl_elem_iface {
+	SNDRV_CTL_ELEM_IFACE_CARD = 0,		/* global control */
+	SNDRV_CTL_ELEM_IFACE_HWDEP,		/* hardware dependent device */
+	SNDRV_CTL_ELEM_IFACE_MIXER,		/* virtual mixer device */
+	SNDRV_CTL_ELEM_IFACE_PCM,		/* PCM device */
+	SNDRV_CTL_ELEM_IFACE_RAWMIDI,		/* RawMidi device */
+	SNDRV_CTL_ELEM_IFACE_TIMER,		/* timer device */
+	SNDRV_CTL_ELEM_IFACE_SEQUENCER,		/* sequencer client */
+	SNDRV_CTL_ELEM_IFACE_LAST = SNDRV_CTL_ELEM_IFACE_SEQUENCER,
+};
+
+#define SNDRV_CTL_ELEM_ACCESS_READ		(1<<0)
+#define SNDRV_CTL_ELEM_ACCESS_WRITE		(1<<1)
+#define SNDRV_CTL_ELEM_ACCESS_READWRITE		(SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_VOLATILE		(1<<2)	/* control value may be changed without a notification */
+#define SNDRV_CTL_ELEM_ACCESS_TIMESTAMP		(1<<2)	/* when was control changed */
+#define SNDRV_CTL_ELEM_ACCESS_INACTIVE		(1<<8)	/* control does actually nothing, but may be updated */
+#define SNDRV_CTL_ELEM_ACCESS_LOCK		(1<<9)	/* write lock */
+#define SNDRV_CTL_ELEM_ACCESS_OWNER		(1<<10)	/* write lock owner */
+#define SNDRV_CTL_ELEM_ACCESS_USER		(1<<29) /* user space element */
+#define SNDRV_CTL_ELEM_ACCESS_DINDIRECT		(1<<30)	/* indirect access for matrix dimensions in the info structure */
+#define SNDRV_CTL_ELEM_ACCESS_INDIRECT		(1<<31)	/* indirect access for element value in the value structure */
+
+/* for further details see the ACPI and PCI power management specification */
+#define SNDRV_CTL_POWER_D0		0x0000	/* full On */
+#define SNDRV_CTL_POWER_D1		0x0100	/* partial On */
+#define SNDRV_CTL_POWER_D2		0x0200	/* partial On */
+#define SNDRV_CTL_POWER_D3		0x0300	/* Off */
+#define SNDRV_CTL_POWER_D3hot		(SNDRV_CTL_POWER_D3|0x0000)	/* Off, with power */
+#define SNDRV_CTL_POWER_D3cold		(SNDRV_CTL_POWER_D3|0x0001)	/* Off, without power */
+
+struct sndrv_ctl_elem_id {
+	unsigned int numid;		/* numeric identifier, zero = invalid */
+	enum sndrv_ctl_elem_iface iface; /* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+        unsigned char name[44];		/* ASCII name of item */
+	unsigned int index;		/* index of item */
+};
+
+struct sndrv_ctl_elem_list {
+	unsigned int offset;		/* W: first element ID to get */
+	unsigned int space;		/* W: count of element IDs to get */
+	unsigned int used;		/* R: count of element IDs set */
+	unsigned int count;		/* R: count of all elements */
+	struct sndrv_ctl_elem_id __user *pids; /* R: IDs */
+	unsigned char reserved[50];
+};
+
+struct sndrv_ctl_elem_info {
+	struct sndrv_ctl_elem_id id;	/* W: element ID */
+	enum sndrv_ctl_elem_type type;	/* R: value type - SNDRV_CTL_ELEM_TYPE_* */
+	unsigned int access;		/* R: value access (bitmask) - SNDRV_CTL_ELEM_ACCESS_* */
+	unsigned int count;		/* count of values */
+	pid_t owner;			/* owner's PID of this control */
+	union {
+		struct {
+			long min;		/* R: minimum value */
+			long max;		/* R: maximum value */
+			long step;		/* R: step (0 variable) */
+		} integer;
+		struct {
+			long long min;		/* R: minimum value */
+			long long max;		/* R: maximum value */
+			long long step;		/* R: step (0 variable) */
+		} integer64;
+		struct {
+			unsigned int items;	/* R: number of items */
+			unsigned int item;	/* W: item number */
+			char name[64];		/* R: value name */
+		} enumerated;
+		unsigned char reserved[128];
+	} value;
+	union {
+		unsigned short d[4];		/* dimensions */
+		unsigned short *d_ptr;		/* indirect */
+	} dimen;
+	unsigned char reserved[64-4*sizeof(unsigned short)];
+};
+
+struct sndrv_ctl_elem_value {
+	struct sndrv_ctl_elem_id id;	/* W: element ID */
+	unsigned int indirect: 1;	/* W: use indirect pointer (xxx_ptr member) */
+        union {
+		union {
+			long value[128];
+			long *value_ptr;
+		} integer;
+		union {
+			long long value[64];
+			long long *value_ptr;
+		} integer64;
+		union {
+			unsigned int item[128];
+			unsigned int *item_ptr;
+		} enumerated;
+		union {
+			unsigned char data[512];
+			unsigned char *data_ptr;
+		} bytes;
+		struct sndrv_aes_iec958 iec958;
+        } value;                /* RO */
+	struct timespec tstamp;
+        unsigned char reserved[128-sizeof(struct timespec)];
+};
+
+enum {
+	SNDRV_CTL_IOCTL_PVERSION = _IOR('U', 0x00, int),
+	SNDRV_CTL_IOCTL_CARD_INFO = _IOR('U', 0x01, struct sndrv_ctl_card_info),
+	SNDRV_CTL_IOCTL_ELEM_LIST = _IOWR('U', 0x10, struct sndrv_ctl_elem_list),
+	SNDRV_CTL_IOCTL_ELEM_INFO = _IOWR('U', 0x11, struct sndrv_ctl_elem_info),
+	SNDRV_CTL_IOCTL_ELEM_READ = _IOWR('U', 0x12, struct sndrv_ctl_elem_value),
+	SNDRV_CTL_IOCTL_ELEM_WRITE = _IOWR('U', 0x13, struct sndrv_ctl_elem_value),
+	SNDRV_CTL_IOCTL_ELEM_LOCK = _IOW('U', 0x14, struct sndrv_ctl_elem_id),
+	SNDRV_CTL_IOCTL_ELEM_UNLOCK = _IOW('U', 0x15, struct sndrv_ctl_elem_id),
+	SNDRV_CTL_IOCTL_SUBSCRIBE_EVENTS = _IOWR('U', 0x16, int),
+	SNDRV_CTL_IOCTL_ELEM_ADD = _IOWR('U', 0x17, struct sndrv_ctl_elem_info),
+	SNDRV_CTL_IOCTL_ELEM_REPLACE = _IOWR('U', 0x18, struct sndrv_ctl_elem_info),
+	SNDRV_CTL_IOCTL_ELEM_REMOVE = _IOWR('U', 0x19, struct sndrv_ctl_elem_id),
+	SNDRV_CTL_IOCTL_HWDEP_NEXT_DEVICE = _IOWR('U', 0x20, int),
+	SNDRV_CTL_IOCTL_HWDEP_INFO = _IOR('U', 0x21, struct sndrv_hwdep_info),
+	SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE = _IOR('U', 0x30, int),
+	SNDRV_CTL_IOCTL_PCM_INFO = _IOWR('U', 0x31, struct sndrv_pcm_info),
+	SNDRV_CTL_IOCTL_PCM_PREFER_SUBDEVICE = _IOW('U', 0x32, int),
+	SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE = _IOWR('U', 0x40, int),
+	SNDRV_CTL_IOCTL_RAWMIDI_INFO = _IOWR('U', 0x41, struct sndrv_rawmidi_info),
+	SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE = _IOW('U', 0x42, int),
+	SNDRV_CTL_IOCTL_POWER = _IOWR('U', 0xd0, int),
+	SNDRV_CTL_IOCTL_POWER_STATE = _IOR('U', 0xd1, int),
+};
+
+/*
+ *  Read interface.
+ */
+
+enum sndrv_ctl_event_type {
+	SNDRV_CTL_EVENT_ELEM = 0,
+	SNDRV_CTL_EVENT_LAST = SNDRV_CTL_EVENT_ELEM,
+};
+
+#define SNDRV_CTL_EVENT_MASK_VALUE	(1<<0)	/* element value was changed */
+#define SNDRV_CTL_EVENT_MASK_INFO	(1<<1)	/* element info was changed */
+#define SNDRV_CTL_EVENT_MASK_ADD	(1<<2)	/* element was added */
+#define SNDRV_CTL_EVENT_MASK_REMOVE	(~0U)	/* element was removed */
+
+struct sndrv_ctl_event {
+	enum sndrv_ctl_event_type type;	/* event type - SNDRV_CTL_EVENT_* */
+	union {
+		struct {
+			unsigned int mask;
+			struct sndrv_ctl_elem_id id;
+		} elem;
+                unsigned char data8[60];
+        } data;
+};
+
+/*
+ *  Control names
+ */
+
+#define SNDRV_CTL_NAME_NONE				""
+#define SNDRV_CTL_NAME_PLAYBACK				"Playback "
+#define SNDRV_CTL_NAME_CAPTURE				"Capture "
+
+#define SNDRV_CTL_NAME_IEC958_NONE			""
+#define SNDRV_CTL_NAME_IEC958_SWITCH			"Switch"
+#define SNDRV_CTL_NAME_IEC958_VOLUME			"Volume"
+#define SNDRV_CTL_NAME_IEC958_DEFAULT			"Default"
+#define SNDRV_CTL_NAME_IEC958_MASK			"Mask"
+#define SNDRV_CTL_NAME_IEC958_CON_MASK			"Con Mask"
+#define SNDRV_CTL_NAME_IEC958_PRO_MASK			"Pro Mask"
+#define SNDRV_CTL_NAME_IEC958_PCM_STREAM		"PCM Stream"
+#define SNDRV_CTL_NAME_IEC958(expl,direction,what)	"IEC958 " expl SNDRV_CTL_NAME_##direction SNDRV_CTL_NAME_IEC958_##what
+
+/*
+ *
+ */
+
+struct sndrv_xferv {
+	const struct iovec *vector;
+	unsigned long count;
+};
+
+enum {
+	SNDRV_IOCTL_READV = _IOW('K', 0x00, struct sndrv_xferv),
+	SNDRV_IOCTL_WRITEV = _IOW('K', 0x01, struct sndrv_xferv),
+};
+
+#endif /* __SOUND_ASOUND_H */
diff --git a/include/sound/asound_fm.h b/include/sound/asound_fm.h
new file mode 100644
index 000000000000..b0da677f8f75
--- /dev/null
+++ b/include/sound/asound_fm.h
@@ -0,0 +1,115 @@
+#ifndef __SOUND_ASOUND_FM_H
+#define __SOUND_ASOUND_FM_H
+
+/*
+ *  Advanced Linux Sound Architecture - ALSA
+ *
+ *  Interface file between ALSA driver & user space
+ *  Copyright (c) 1994-98 by Jaroslav Kysela <perex@suse.cz>,
+ *                           4Front Technologies
+ *
+ *  Direct FM control
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_DM_FM_MODE_OPL2	0x00
+#define SNDRV_DM_FM_MODE_OPL3	0x01
+
+typedef struct snd_dm_fm_info {
+	unsigned char fm_mode;		/* OPL mode, see SNDRV_DM_FM_MODE_XXX */
+	unsigned char rhythm;		/* percussion mode flag */
+} snd_dm_fm_info_t;
+
+/*
+ *  Data structure composing an FM "note" or sound event.
+ */
+
+typedef struct snd_dm_fm_voice {
+	unsigned char op;		/* operator cell (0 or 1) */
+	unsigned char voice;		/* FM voice (0 to 17) */
+
+	unsigned char am;		/* amplitude modulation */
+	unsigned char vibrato;		/* vibrato effect */
+	unsigned char do_sustain;	/* sustain phase */
+	unsigned char kbd_scale;	/* keyboard scaling */
+	unsigned char harmonic;		/* 4 bits: harmonic and multiplier */
+	unsigned char scale_level;	/* 2 bits: decrease output freq rises */
+	unsigned char volume;		/* 6 bits: volume */
+
+	unsigned char attack;		/* 4 bits: attack rate */
+	unsigned char decay;		/* 4 bits: decay rate */
+	unsigned char sustain;		/* 4 bits: sustain level */
+	unsigned char release;		/* 4 bits: release rate */
+
+	unsigned char feedback;		/* 3 bits: feedback for op0 */
+	unsigned char connection;	/* 0 for serial, 1 for parallel */
+	unsigned char left;		/* stereo left */
+	unsigned char right;		/* stereo right */
+	unsigned char waveform;		/* 3 bits: waveform shape */
+} snd_dm_fm_voice_t;
+
+/*
+ *  This describes an FM note by its voice, octave, frequency number (10bit)
+ *  and key on/off.
+ */
+
+typedef struct snd_dm_fm_note {
+	unsigned char voice;	/* 0-17 voice channel */
+	unsigned char octave;	/* 3 bits: what octave to play */
+	unsigned int fnum;	/* 10 bits: frequency number */
+	unsigned char key_on;	/* set for active, clear for silent */
+} snd_dm_fm_note_t;
+
+/*
+ *  FM parameters that apply globally to all voices, and thus are not "notes"
+ */
+
+typedef struct snd_dm_fm_params {
+	unsigned char am_depth;		/* amplitude modulation depth (1=hi) */
+	unsigned char vib_depth;	/* vibrato depth (1=hi) */
+	unsigned char kbd_split;	/* keyboard split */
+	unsigned char rhythm;		/* percussion mode select */
+
+	/* This block is the percussion instrument data */
+	unsigned char bass;
+	unsigned char snare;
+	unsigned char tomtom;
+	unsigned char cymbal;
+	unsigned char hihat;
+} snd_dm_fm_params_t;
+
+/*
+ *  FM mode ioctl settings
+ */
+
+#define SNDRV_DM_FM_IOCTL_INFO		_IOR('H', 0x20, snd_dm_fm_info_t)
+#define SNDRV_DM_FM_IOCTL_RESET		_IO ('H', 0x21)
+#define SNDRV_DM_FM_IOCTL_PLAY_NOTE	_IOW('H', 0x22, snd_dm_fm_note_t)
+#define SNDRV_DM_FM_IOCTL_SET_VOICE	_IOW('H', 0x23, snd_dm_fm_voice_t)
+#define SNDRV_DM_FM_IOCTL_SET_PARAMS	_IOW('H', 0x24, snd_dm_fm_params_t)
+#define SNDRV_DM_FM_IOCTL_SET_MODE	_IOW('H', 0x25, int)
+/* for OPL3 only */
+#define SNDRV_DM_FM_IOCTL_SET_CONNECTION	_IOW('H', 0x26, int)
+
+#define SNDRV_DM_FM_OSS_IOCTL_RESET		0x20
+#define SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE		0x21
+#define SNDRV_DM_FM_OSS_IOCTL_SET_VOICE		0x22
+#define SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS	0x23
+#define SNDRV_DM_FM_OSS_IOCTL_SET_MODE		0x24
+#define SNDRV_DM_FM_OSS_IOCTL_SET_OPL		0x25
+
+#endif /* __SOUND_ASOUND_FM_H */
diff --git a/include/sound/asoundef.h b/include/sound/asoundef.h
new file mode 100644
index 000000000000..58c9ef3d1825
--- /dev/null
+++ b/include/sound/asoundef.h
@@ -0,0 +1,227 @@
+#ifndef __SOUND_ASOUNDEF_H
+#define __SOUND_ASOUNDEF_H
+
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2000 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+/* AES/IEC958 channel status bits */
+#define IEC958_AES0_PROFESSIONAL	(1<<0)	/* 0 = consumer, 1 = professional */
+#define IEC958_AES0_NONAUDIO		(1<<1)	/* 0 = audio, 1 = non-audio */
+#define IEC958_AES0_PRO_EMPHASIS	(7<<2)	/* mask - emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_NOTID	(0<<2)	/* emphasis not indicated */
+#define IEC958_AES0_PRO_EMPHASIS_NONE	(1<<2)	/* none emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_5015	(3<<2)	/* 50/15us emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_CCITT	(7<<2)	/* CCITT J.17 emphasis */
+#define IEC958_AES0_PRO_FREQ_UNLOCKED	(1<<5)	/* source sample frequency: 0 = locked, 1 = unlocked */
+#define IEC958_AES0_PRO_FS		(3<<6)	/* mask - sample frequency */
+#define IEC958_AES0_PRO_FS_NOTID	(0<<6)	/* fs not indicated */
+#define IEC958_AES0_PRO_FS_44100	(1<<6)	/* 44.1kHz */
+#define IEC958_AES0_PRO_FS_48000	(2<<6)	/* 48kHz */
+#define IEC958_AES0_PRO_FS_32000	(3<<6)	/* 32kHz */
+#define IEC958_AES0_CON_NOT_COPYRIGHT	(1<<2)	/* 0 = copyright, 1 = not copyright */
+#define IEC958_AES0_CON_EMPHASIS	(7<<3)	/* mask - emphasis */
+#define IEC958_AES0_CON_EMPHASIS_NONE	(0<<3)	/* none emphasis */
+#define IEC958_AES0_CON_EMPHASIS_5015	(1<<3)	/* 50/15us emphasis */
+#define IEC958_AES0_CON_MODE		(3<<6)	/* mask - mode */
+#define IEC958_AES1_PRO_MODE		(15<<0)	/* mask - channel mode */
+#define IEC958_AES1_PRO_MODE_NOTID	(0<<0)	/* not indicated */
+#define IEC958_AES1_PRO_MODE_STEREOPHONIC (2<<0) /* stereophonic - ch A is left */
+#define IEC958_AES1_PRO_MODE_SINGLE	(4<<0)	/* single channel */
+#define IEC958_AES1_PRO_MODE_TWO	(8<<0)	/* two channels */
+#define IEC958_AES1_PRO_MODE_PRIMARY	(12<<0)	/* primary/secondary */
+#define IEC958_AES1_PRO_MODE_BYTE3	(15<<0)	/* vector to byte 3 */
+#define IEC958_AES1_PRO_USERBITS	(15<<4)	/* mask - user bits */
+#define IEC958_AES1_PRO_USERBITS_NOTID	(0<<4)	/* not indicated */
+#define IEC958_AES1_PRO_USERBITS_192	(8<<4)	/* 192-bit structure */
+#define IEC958_AES1_PRO_USERBITS_UDEF	(12<<4)	/* user defined application */
+#define IEC958_AES1_CON_CATEGORY	0x7f
+#define IEC958_AES1_CON_GENERAL		0x00
+#define IEC958_AES1_CON_EXPERIMENTAL	0x40
+#define IEC958_AES1_CON_SOLIDMEM_MASK	0x0f
+#define IEC958_AES1_CON_SOLIDMEM_ID	0x08
+#define IEC958_AES1_CON_BROADCAST1_MASK 0x07
+#define IEC958_AES1_CON_BROADCAST1_ID	0x04
+#define IEC958_AES1_CON_DIGDIGCONV_MASK 0x07
+#define IEC958_AES1_CON_DIGDIGCONV_ID	0x02
+#define IEC958_AES1_CON_ADC_COPYRIGHT_MASK 0x1f
+#define IEC958_AES1_CON_ADC_COPYRIGHT_ID 0x06
+#define IEC958_AES1_CON_ADC_MASK	0x1f
+#define IEC958_AES1_CON_ADC_ID		0x16
+#define IEC958_AES1_CON_BROADCAST2_MASK 0x0f
+#define IEC958_AES1_CON_BROADCAST2_ID	0x0e
+#define IEC958_AES1_CON_LASEROPT_MASK	0x07
+#define IEC958_AES1_CON_LASEROPT_ID	0x01
+#define IEC958_AES1_CON_MUSICAL_MASK	0x07
+#define IEC958_AES1_CON_MUSICAL_ID	0x05
+#define IEC958_AES1_CON_MAGNETIC_MASK	0x07
+#define IEC958_AES1_CON_MAGNETIC_ID	0x03
+#define IEC958_AES1_CON_IEC908_CD	(IEC958_AES1_CON_LASEROPT_ID|0x00)
+#define IEC958_AES1_CON_NON_IEC908_CD	(IEC958_AES1_CON_LASEROPT_ID|0x08)
+#define IEC958_AES1_CON_PCM_CODER	(IEC958_AES1_CON_DIGDIGCONV_ID|0x00)
+#define IEC958_AES1_CON_SAMPLER		(IEC958_AES1_CON_DIGDIGCONV_ID|0x20)
+#define IEC958_AES1_CON_MIXER		(IEC958_AES1_CON_DIGDIGCONV_ID|0x10)
+#define IEC958_AES1_CON_RATE_CONVERTER	(IEC958_AES1_CON_DIGDIGCONV_ID|0x18)
+#define IEC958_AES1_CON_SYNTHESIZER	(IEC958_AES1_CON_MUSICAL_ID|0x00)
+#define IEC958_AES1_CON_MICROPHONE	(IEC958_AES1_CON_MUSICAL_ID|0x08)
+#define IEC958_AES1_CON_DAT		(IEC958_AES1_CON_MAGNETIC_ID|0x00)
+#define IEC958_AES1_CON_VCR		(IEC958_AES1_CON_MAGNETIC_ID|0x08)
+#define IEC958_AES1_CON_ORIGINAL	(1<<7)	/* this bits depends on the category code */
+#define IEC958_AES2_PRO_SBITS		(7<<0)	/* mask - sample bits */
+#define IEC958_AES2_PRO_SBITS_20	(2<<0)	/* 20-bit - coordination */
+#define IEC958_AES2_PRO_SBITS_24	(4<<0)	/* 24-bit - main audio */
+#define IEC958_AES2_PRO_SBITS_UDEF	(6<<0)	/* user defined application */
+#define IEC958_AES2_PRO_WORDLEN		(7<<3)	/* mask - source word length */
+#define IEC958_AES2_PRO_WORDLEN_NOTID	(0<<3)	/* not indicated */
+#define IEC958_AES2_PRO_WORDLEN_22_18	(2<<3)	/* 22-bit or 18-bit */
+#define IEC958_AES2_PRO_WORDLEN_23_19	(4<<3)	/* 23-bit or 19-bit */
+#define IEC958_AES2_PRO_WORDLEN_24_20	(5<<3)	/* 24-bit or 20-bit */
+#define IEC958_AES2_PRO_WORDLEN_20_16	(6<<3)	/* 20-bit or 16-bit */
+#define IEC958_AES2_CON_SOURCE		(15<<0)	/* mask - source number */
+#define IEC958_AES2_CON_SOURCE_UNSPEC	(0<<0)	/* unspecified */
+#define IEC958_AES2_CON_CHANNEL		(15<<4)	/* mask - channel number */
+#define IEC958_AES2_CON_CHANNEL_UNSPEC	(0<<4)	/* unspecified */
+#define IEC958_AES3_CON_FS		(15<<0)	/* mask - sample frequency */
+#define IEC958_AES3_CON_FS_44100	(0<<0)	/* 44.1kHz */
+#define IEC958_AES3_CON_FS_48000	(2<<0)	/* 48kHz */
+#define IEC958_AES3_CON_FS_32000	(3<<0)	/* 32kHz */
+#define IEC958_AES3_CON_CLOCK		(3<<4)	/* mask - clock accuracy */
+#define IEC958_AES3_CON_CLOCK_1000PPM	(0<<4)	/* 1000 ppm */
+#define IEC958_AES3_CON_CLOCK_50PPM	(1<<4)	/* 50 ppm */
+#define IEC958_AES3_CON_CLOCK_VARIABLE	(2<<4)	/* variable pitch */
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+#define MIDI_CHANNELS			16
+#define MIDI_GM_DRUM_CHANNEL		(10-1)
+
+/*
+ *  MIDI commands
+ */
+
+#define MIDI_CMD_NOTE_OFF		0x80
+#define MIDI_CMD_NOTE_ON		0x90
+#define MIDI_CMD_NOTE_PRESSURE		0xa0
+#define MIDI_CMD_CONTROL		0xb0
+#define MIDI_CMD_PGM_CHANGE		0xc0
+#define MIDI_CMD_CHANNEL_PRESSURE	0xd0
+#define MIDI_CMD_BENDER			0xe0
+
+#define MIDI_CMD_COMMON_SYSEX		0xf0
+#define MIDI_CMD_COMMON_MTC_QUARTER	0xf1
+#define MIDI_CMD_COMMON_SONG_POS	0xf2
+#define MIDI_CMD_COMMON_SONG_SELECT	0xf3
+#define MIDI_CMD_COMMON_TUNE_REQUEST	0xf6
+#define MIDI_CMD_COMMON_SYSEX_END	0xf7
+#define MIDI_CMD_COMMON_CLOCK		0xf8
+#define MIDI_CMD_COMMON_START		0xfa
+#define MIDI_CMD_COMMON_CONTINUE	0xfb
+#define MIDI_CMD_COMMON_STOP		0xfc
+#define MIDI_CMD_COMMON_SENSING		0xfe
+#define MIDI_CMD_COMMON_RESET		0xff
+
+/*
+ *  MIDI controllers
+ */
+
+#define MIDI_CTL_MSB_BANK		0x00
+#define MIDI_CTL_MSB_MODWHEEL         	0x01
+#define MIDI_CTL_MSB_BREATH           	0x02
+#define MIDI_CTL_MSB_FOOT             	0x04
+#define MIDI_CTL_MSB_PORTAMENTO_TIME 	0x05
+#define MIDI_CTL_MSB_DATA_ENTRY		0x06
+#define MIDI_CTL_MSB_MAIN_VOLUME      	0x07
+#define MIDI_CTL_MSB_BALANCE          	0x08
+#define MIDI_CTL_MSB_PAN              	0x0a
+#define MIDI_CTL_MSB_EXPRESSION       	0x0b
+#define MIDI_CTL_MSB_EFFECT1		0x0c
+#define MIDI_CTL_MSB_EFFECT2		0x0d
+#define MIDI_CTL_MSB_GENERAL_PURPOSE1 	0x10
+#define MIDI_CTL_MSB_GENERAL_PURPOSE2 	0x11
+#define MIDI_CTL_MSB_GENERAL_PURPOSE3 	0x12
+#define MIDI_CTL_MSB_GENERAL_PURPOSE4 	0x13
+#define MIDI_CTL_LSB_BANK		0x20
+#define MIDI_CTL_LSB_MODWHEEL        	0x21
+#define MIDI_CTL_LSB_BREATH           	0x22
+#define MIDI_CTL_LSB_FOOT             	0x24
+#define MIDI_CTL_LSB_PORTAMENTO_TIME 	0x25
+#define MIDI_CTL_LSB_DATA_ENTRY		0x26
+#define MIDI_CTL_LSB_MAIN_VOLUME      	0x27
+#define MIDI_CTL_LSB_BALANCE          	0x28
+#define MIDI_CTL_LSB_PAN              	0x2a
+#define MIDI_CTL_LSB_EXPRESSION       	0x2b
+#define MIDI_CTL_LSB_EFFECT1		0x2c
+#define MIDI_CTL_LSB_EFFECT2		0x2d
+#define MIDI_CTL_LSB_GENERAL_PURPOSE1 	0x30
+#define MIDI_CTL_LSB_GENERAL_PURPOSE2 	0x31
+#define MIDI_CTL_LSB_GENERAL_PURPOSE3 	0x32
+#define MIDI_CTL_LSB_GENERAL_PURPOSE4 	0x33
+#define MIDI_CTL_SUSTAIN              	0x40
+#define MIDI_CTL_PORTAMENTO           	0x41
+#define MIDI_CTL_SOSTENUTO            	0x42
+#define MIDI_CTL_SOFT_PEDAL           	0x43
+#define MIDI_CTL_LEGATO_FOOTSWITCH	0x44
+#define MIDI_CTL_HOLD2                	0x45
+#define MIDI_CTL_SC1_SOUND_VARIATION	0x46
+#define MIDI_CTL_SC2_TIMBRE		0x47
+#define MIDI_CTL_SC3_RELEASE_TIME	0x48
+#define MIDI_CTL_SC4_ATTACK_TIME	0x49
+#define MIDI_CTL_SC5_BRIGHTNESS		0x4a
+#define MIDI_CTL_SC6			0x4b
+#define MIDI_CTL_SC7			0x4c
+#define MIDI_CTL_SC8			0x4d
+#define MIDI_CTL_SC9			0x4e
+#define MIDI_CTL_SC10			0x4f
+#define MIDI_CTL_GENERAL_PURPOSE5     	0x50
+#define MIDI_CTL_GENERAL_PURPOSE6     	0x51
+#define MIDI_CTL_GENERAL_PURPOSE7     	0x52
+#define MIDI_CTL_GENERAL_PURPOSE8     	0x53
+#define MIDI_CTL_PORTAMENTO_CONTROL	0x54
+#define MIDI_CTL_E1_REVERB_DEPTH	0x5b
+#define MIDI_CTL_E2_TREMOLO_DEPTH	0x5c
+#define MIDI_CTL_E3_CHORUS_DEPTH	0x5d
+#define MIDI_CTL_E4_DETUNE_DEPTH	0x5e
+#define MIDI_CTL_E5_PHASER_DEPTH	0x5f
+#define MIDI_CTL_DATA_INCREMENT       	0x60
+#define MIDI_CTL_DATA_DECREMENT       	0x61
+#define MIDI_CTL_NONREG_PARM_NUM_LSB  	0x62
+#define MIDI_CTL_NONREG_PARM_NUM_MSB  	0x63
+#define MIDI_CTL_REGIST_PARM_NUM_LSB  	0x64
+#define MIDI_CTL_REGIST_PARM_NUM_MSB	0x65
+#define MIDI_CTL_ALL_SOUNDS_OFF		0x78
+#define MIDI_CTL_RESET_CONTROLLERS	0x79
+#define MIDI_CTL_LOCAL_CONTROL_SWITCH	0x7a
+#define MIDI_CTL_ALL_NOTES_OFF		0x7b
+#define MIDI_CTL_OMNI_OFF		0x7c
+#define MIDI_CTL_OMNI_ON		0x7d
+#define MIDI_CTL_MONO1			0x7e
+#define MIDI_CTL_MONO2			0x7f
+
+#endif /* __SOUND_ASOUNDEF_H */
diff --git a/include/sound/control.h b/include/sound/control.h
new file mode 100644
index 000000000000..7b9444cd02f4
--- /dev/null
+++ b/include/sound/control.h
@@ -0,0 +1,162 @@
+#ifndef __SOUND_CONTROL_H
+#define __SOUND_CONTROL_H
+
+/*
+ *  Header file for control interface
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+
+typedef struct sndrv_aes_iec958 snd_aes_iec958_t;
+typedef struct sndrv_ctl_card_info snd_ctl_card_info_t;
+typedef enum sndrv_ctl_elem_type snd_ctl_elem_type_t;
+typedef enum sndrv_ctl_elem_iface snd_ctl_elem_iface_t;
+typedef struct sndrv_ctl_elem_id snd_ctl_elem_id_t;
+typedef struct sndrv_ctl_elem_list snd_ctl_elem_list_t;
+typedef struct sndrv_ctl_elem_info snd_ctl_elem_info_t;
+typedef struct sndrv_ctl_elem_value snd_ctl_elem_value_t;
+typedef enum sndrv_ctl_event_type snd_ctl_event_type_t;
+typedef struct sndrv_ctl_event snd_ctl_event_t;
+
+#define snd_kcontrol_chip(kcontrol) ((kcontrol)->private_data)
+
+typedef int (snd_kcontrol_info_t) (snd_kcontrol_t * kcontrol, snd_ctl_elem_info_t * uinfo);
+typedef int (snd_kcontrol_get_t) (snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+typedef int (snd_kcontrol_put_t) (snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+
+typedef struct _snd_kcontrol_new {
+	snd_ctl_elem_iface_t iface;	/* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+	unsigned char *name;		/* ASCII name of item */
+	unsigned int index;		/* index of item */
+	unsigned int access;		/* access rights */
+	unsigned int count;		/* count of same elements */
+	snd_kcontrol_info_t *info;
+	snd_kcontrol_get_t *get;
+	snd_kcontrol_put_t *put;
+	unsigned long private_value;
+} snd_kcontrol_new_t;
+
+typedef struct _snd_kcontrol_volatile {
+	snd_ctl_file_t *owner;	/* locked */
+	pid_t owner_pid;
+	unsigned int access;	/* access rights */
+} snd_kcontrol_volatile_t;
+
+struct _snd_kcontrol {
+	struct list_head list;		/* list of controls */
+	snd_ctl_elem_id_t id;
+	unsigned int count;		/* count of same elements */
+	snd_kcontrol_info_t *info;
+	snd_kcontrol_get_t *get;
+	snd_kcontrol_put_t *put;
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(snd_kcontrol_t *kcontrol);
+	snd_kcontrol_volatile_t vd[0];	/* volatile data */
+};
+
+#define snd_kcontrol(n) list_entry(n, snd_kcontrol_t, list)
+
+typedef struct _snd_kctl_event {
+	struct list_head list;	/* list of events */
+	snd_ctl_elem_id_t id;
+	unsigned int mask;
+} snd_kctl_event_t;
+
+#define snd_kctl_event(n) list_entry(n, snd_kctl_event_t, list)
+
+struct _snd_ctl_file {
+	struct list_head list;		/* list of all control files */
+	snd_card_t *card;
+	pid_t pid;
+	int prefer_pcm_subdevice;
+	int prefer_rawmidi_subdevice;
+	wait_queue_head_t change_sleep;
+	spinlock_t read_lock;
+	struct fasync_struct *fasync;
+	int subscribed;			/* read interface is activated */
+	struct list_head events;	/* waiting events for read */
+};
+
+#define snd_ctl_file(n) list_entry(n, snd_ctl_file_t, list)
+
+typedef int (*snd_kctl_ioctl_func_t) (snd_card_t * card,
+				 snd_ctl_file_t * control,
+				 unsigned int cmd, unsigned long arg);
+
+void snd_ctl_notify(snd_card_t * card, unsigned int mask, snd_ctl_elem_id_t * id);
+
+snd_kcontrol_t *snd_ctl_new(snd_kcontrol_t * kcontrol, unsigned int access);
+snd_kcontrol_t *snd_ctl_new1(snd_kcontrol_new_t * kcontrolnew, void * private_data);
+void snd_ctl_free_one(snd_kcontrol_t * kcontrol);
+int snd_ctl_add(snd_card_t * card, snd_kcontrol_t * kcontrol);
+int snd_ctl_remove(snd_card_t * card, snd_kcontrol_t * kcontrol);
+int snd_ctl_remove_id(snd_card_t * card, snd_ctl_elem_id_t *id);
+int snd_ctl_rename_id(snd_card_t * card, snd_ctl_elem_id_t *src_id, snd_ctl_elem_id_t *dst_id);
+snd_kcontrol_t *snd_ctl_find_numid(snd_card_t * card, unsigned int numid);
+snd_kcontrol_t *snd_ctl_find_id(snd_card_t * card, snd_ctl_elem_id_t *id);
+
+int snd_ctl_create(snd_card_t *card);
+
+int snd_ctl_register_ioctl(snd_kctl_ioctl_func_t fcn);
+int snd_ctl_unregister_ioctl(snd_kctl_ioctl_func_t fcn);
+#ifdef CONFIG_COMPAT
+int snd_ctl_register_ioctl_compat(snd_kctl_ioctl_func_t fcn);
+int snd_ctl_unregister_ioctl_compat(snd_kctl_ioctl_func_t fcn);
+#else
+#define snd_ctl_register_ioctl_compat(fcn)
+#define snd_ctl_unregister_ioctl_compat(fcn)
+#endif
+
+int snd_ctl_elem_read(snd_card_t *card, snd_ctl_elem_value_t *control);
+int snd_ctl_elem_write(snd_card_t *card, snd_ctl_file_t *file, snd_ctl_elem_value_t *control);
+
+static inline unsigned int snd_ctl_get_ioffnum(snd_kcontrol_t *kctl, snd_ctl_elem_id_t *id)
+{
+	return id->numid - kctl->id.numid;
+}
+
+static inline unsigned int snd_ctl_get_ioffidx(snd_kcontrol_t *kctl, snd_ctl_elem_id_t *id)
+{
+	return id->index - kctl->id.index;
+}
+
+static inline unsigned int snd_ctl_get_ioff(snd_kcontrol_t *kctl, snd_ctl_elem_id_t *id)
+{
+	if (id->numid) {
+		return snd_ctl_get_ioffnum(kctl, id);
+	} else {
+		return snd_ctl_get_ioffidx(kctl, id);
+	}
+}
+
+static inline snd_ctl_elem_id_t *snd_ctl_build_ioff(snd_ctl_elem_id_t *dst_id,
+						    snd_kcontrol_t *src_kctl,
+						    unsigned int offset)
+{
+	*dst_id = src_kctl->id;
+	dst_id->index += offset;
+	dst_id->numid += offset;
+	return dst_id;
+}
+
+#endif	/* __SOUND_CONTROL_H */
diff --git a/include/sound/core.h b/include/sound/core.h
new file mode 100644
index 000000000000..9117c23e3a01
--- /dev/null
+++ b/include/sound/core.h
@@ -0,0 +1,502 @@
+#ifndef __SOUND_CORE_H
+#define __SOUND_CORE_H
+
+/*
+ *  Main header file for the ALSA driver
+ *  Copyright (c) 1994-2001 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/sched.h>		/* wake_up() */
+#include <asm/semaphore.h>		/* struct semaphore */
+#include <linux/rwsem.h>		/* struct rw_semaphore */
+#include <linux/workqueue.h>		/* struct workqueue_struct */
+#include <linux/pm.h>			/* pm_message_t */
+
+/* Typedef's */
+typedef struct timespec snd_timestamp_t;
+typedef struct sndrv_interval snd_interval_t;
+typedef enum sndrv_card_type snd_card_type;
+typedef struct sndrv_xferi snd_xferi_t;
+typedef struct sndrv_xfern snd_xfern_t;
+typedef struct sndrv_xferv snd_xferv_t;
+
+/* forward declarations */
+#ifdef CONFIG_PCI
+struct pci_dev;
+#endif
+#ifdef CONFIG_SBUS
+struct sbus_dev;
+#endif
+
+/* device allocation stuff */
+
+#define SNDRV_DEV_TYPE_RANGE_SIZE		0x1000
+
+typedef enum {
+	SNDRV_DEV_TOPLEVEL =		(0*SNDRV_DEV_TYPE_RANGE_SIZE),
+	SNDRV_DEV_CONTROL,
+	SNDRV_DEV_LOWLEVEL_PRE,
+	SNDRV_DEV_LOWLEVEL_NORMAL =	(1*SNDRV_DEV_TYPE_RANGE_SIZE),
+	SNDRV_DEV_PCM,
+	SNDRV_DEV_RAWMIDI,
+	SNDRV_DEV_TIMER,
+	SNDRV_DEV_SEQUENCER,
+	SNDRV_DEV_HWDEP,
+	SNDRV_DEV_INFO,
+	SNDRV_DEV_BUS,
+	SNDRV_DEV_CODEC,
+	SNDRV_DEV_LOWLEVEL =		(2*SNDRV_DEV_TYPE_RANGE_SIZE)
+} snd_device_type_t;
+
+typedef enum {
+	SNDRV_DEV_BUILD,
+	SNDRV_DEV_REGISTERED,
+	SNDRV_DEV_DISCONNECTED
+} snd_device_state_t;
+
+typedef enum {
+	SNDRV_DEV_CMD_PRE = 0,
+	SNDRV_DEV_CMD_NORMAL = 1,
+	SNDRV_DEV_CMD_POST = 2
+} snd_device_cmd_t;
+
+typedef struct _snd_card snd_card_t;
+typedef struct _snd_device snd_device_t;
+
+typedef int (snd_dev_free_t)(snd_device_t *device);
+typedef int (snd_dev_register_t)(snd_device_t *device);
+typedef int (snd_dev_disconnect_t)(snd_device_t *device);
+typedef int (snd_dev_unregister_t)(snd_device_t *device);
+
+typedef struct {
+	snd_dev_free_t *dev_free;
+	snd_dev_register_t *dev_register;
+	snd_dev_disconnect_t *dev_disconnect;
+	snd_dev_unregister_t *dev_unregister;
+} snd_device_ops_t;
+
+struct _snd_device {
+	struct list_head list;		/* list of registered devices */
+	snd_card_t *card;		/* card which holds this device */
+	snd_device_state_t state;	/* state of the device */
+	snd_device_type_t type;		/* device type */
+	void *device_data;		/* device structure */
+	snd_device_ops_t *ops;		/* operations */
+};
+
+#define snd_device(n) list_entry(n, snd_device_t, list)
+
+/* various typedefs */
+
+typedef struct snd_info_entry snd_info_entry_t;
+typedef struct _snd_pcm snd_pcm_t;
+typedef struct _snd_pcm_str snd_pcm_str_t;
+typedef struct _snd_pcm_substream snd_pcm_substream_t;
+typedef struct _snd_mixer snd_kmixer_t;
+typedef struct _snd_rawmidi snd_rawmidi_t;
+typedef struct _snd_ctl_file snd_ctl_file_t;
+typedef struct _snd_kcontrol snd_kcontrol_t;
+typedef struct _snd_timer snd_timer_t;
+typedef struct _snd_timer_instance snd_timer_instance_t;
+typedef struct _snd_hwdep snd_hwdep_t;
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+typedef struct _snd_oss_mixer snd_mixer_oss_t;
+#endif
+
+/* monitor files for graceful shutdown (hotplug) */
+
+struct snd_monitor_file {
+	struct file *file;
+	struct snd_monitor_file *next;
+};
+
+struct snd_shutdown_f_ops;	/* define it later */
+
+/* main structure for soundcard */
+
+struct _snd_card {
+	int number;			/* number of soundcard (index to snd_cards) */
+
+	char id[16];			/* id string of this card */
+	char driver[16];		/* driver name */
+	char shortname[32];		/* short name of this soundcard */
+	char longname[80];		/* name of this soundcard */
+	char mixername[80];		/* mixer name */
+	char components[80];		/* card components delimited with space */
+
+	struct module *module;		/* top-level module */
+
+	void *private_data;		/* private data for soundcard */
+	void (*private_free) (snd_card_t *card); /* callback for freeing of private data */
+
+	struct list_head devices;	/* devices */
+
+	unsigned int last_numid;	/* last used numeric ID */
+	struct rw_semaphore controls_rwsem;	/* controls list lock */
+	rwlock_t ctl_files_rwlock;	/* ctl_files list lock */
+	int controls_count;		/* count of all controls */
+	int user_ctl_count;		/* count of all user controls */
+	struct list_head controls;	/* all controls for this card */
+	struct list_head ctl_files;	/* active control files */
+
+	snd_info_entry_t *proc_root;	/* root for soundcard specific files */
+	snd_info_entry_t *proc_id;	/* the card id */
+	struct proc_dir_entry *proc_root_link;	/* number link to real id */
+
+	struct snd_monitor_file *files; /* all files associated to this card */
+	struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown state */
+	spinlock_t files_lock;		/* lock the files for this card */
+	int shutdown;			/* this card is going down */
+	wait_queue_head_t shutdown_sleep;
+	struct work_struct free_workq;	/* for free in workqueue */
+	struct device *dev;
+
+#ifdef CONFIG_PM
+	int (*pm_suspend)(snd_card_t *card, pm_message_t state);
+	int (*pm_resume)(snd_card_t *card);
+	void *pm_private_data;
+	unsigned int power_state;	/* power state */
+	struct semaphore power_lock;	/* power lock */
+	wait_queue_head_t power_sleep;
+#ifdef CONFIG_SND_GENERIC_PM
+	struct snd_generic_device *pm_dev;	/* for ISA */
+#endif
+#endif
+
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+	snd_mixer_oss_t *mixer_oss;
+	int mixer_oss_change_count;
+#endif
+};
+
+#ifdef CONFIG_PM
+static inline void snd_power_lock(snd_card_t *card)
+{
+	down(&card->power_lock);
+}
+
+static inline void snd_power_unlock(snd_card_t *card)
+{
+	up(&card->power_lock);
+}
+
+int snd_power_wait(snd_card_t *card, unsigned int power_state, struct file *file);
+
+static inline unsigned int snd_power_get_state(snd_card_t *card)
+{
+	return card->power_state;
+}
+
+static inline void snd_power_change_state(snd_card_t *card, unsigned int state)
+{
+	card->power_state = state;
+	wake_up(&card->power_sleep);
+}
+int snd_card_set_pm_callback(snd_card_t *card,
+			     int (*suspend)(snd_card_t *, pm_message_t),
+			     int (*resume)(snd_card_t *),
+			     void *private_data);
+int snd_card_set_generic_pm_callback(snd_card_t *card,
+				     int (*suspend)(snd_card_t *, pm_message_t),
+				     int (*resume)(snd_card_t *),
+				     void *private_data);
+#define snd_card_set_isa_pm_callback(card,suspend,resume,data) \
+	snd_card_set_generic_pm_callback(card, suspend, resume, data)
+struct pci_dev;
+int snd_card_pci_suspend(struct pci_dev *dev, pm_message_t state);
+int snd_card_pci_resume(struct pci_dev *dev);
+#define SND_PCI_PM_CALLBACKS \
+	.suspend = snd_card_pci_suspend,  .resume = snd_card_pci_resume
+
+#else /* ! CONFIG_PM */
+
+#define snd_power_lock(card)		do { (void)(card); } while (0)
+#define snd_power_unlock(card)		do { (void)(card); } while (0)
+static inline int snd_power_wait(snd_card_t *card, unsigned int state, struct file *file) { return 0; }
+#define snd_power_get_state(card)	SNDRV_CTL_POWER_D0
+#define snd_power_change_state(card, state)	do { (void)(card); } while (0)
+#define snd_card_set_pm_callback(card,suspend,resume,data)
+#define snd_card_set_generic_pm_callback(card,suspend,resume,data)
+#define snd_card_set_isa_pm_callback(card,suspend,resume,data)
+#define SND_PCI_PM_CALLBACKS
+
+#endif /* CONFIG_PM */
+
+/* device.c */
+
+struct _snd_minor {
+	struct list_head list;		/* list of all minors per card */
+	int number;			/* minor number */
+	int device;			/* device number */
+	const char *comment;		/* for /proc/asound/devices */
+	struct file_operations *f_ops;	/* file operations */
+	char name[0];			/* device name (keep at the end of structure) */
+};
+
+typedef struct _snd_minor snd_minor_t;
+
+/* sound.c */
+
+extern int snd_ecards_limit;
+
+void snd_request_card(int card);
+
+int snd_register_device(int type, snd_card_t *card, int dev, snd_minor_t *reg, const char *name);
+int snd_unregister_device(int type, snd_card_t *card, int dev);
+
+#ifdef CONFIG_SND_OSSEMUL
+int snd_register_oss_device(int type, snd_card_t *card, int dev, snd_minor_t *reg, const char *name);
+int snd_unregister_oss_device(int type, snd_card_t *card, int dev);
+#endif
+
+int snd_minor_info_init(void);
+int snd_minor_info_done(void);
+
+/* sound_oss.c */
+
+#ifdef CONFIG_SND_OSSEMUL
+int snd_minor_info_oss_init(void);
+int snd_minor_info_oss_done(void);
+int snd_oss_init_module(void);
+#else
+#define snd_minor_info_oss_init() /*NOP*/
+#define snd_minor_info_oss_done() /*NOP*/
+#define snd_oss_init_module() 0
+#endif
+
+/* memory.c */
+
+#ifdef CONFIG_SND_DEBUG_MEMORY
+void snd_memory_init(void);
+void snd_memory_done(void);
+int snd_memory_info_init(void);
+int snd_memory_info_done(void);
+void *snd_hidden_kmalloc(size_t size, int flags);
+void *snd_hidden_kcalloc(size_t n, size_t size, int flags);
+void snd_hidden_kfree(const void *obj);
+void *snd_hidden_vmalloc(unsigned long size);
+void snd_hidden_vfree(void *obj);
+#define kmalloc(size, flags) snd_hidden_kmalloc(size, flags)
+#define kcalloc(n, size, flags) snd_hidden_kcalloc(n, size, flags)
+#define kfree(obj) snd_hidden_kfree(obj)
+#define vmalloc(size) snd_hidden_vmalloc(size)
+#define vfree(obj) snd_hidden_vfree(obj)
+#define kmalloc_nocheck(size, flags) snd_wrapper_kmalloc(size, flags)
+#define vmalloc_nocheck(size) snd_wrapper_vmalloc(size)
+#define kfree_nocheck(obj) snd_wrapper_kfree(obj)
+#define vfree_nocheck(obj) snd_wrapper_vfree(obj)
+#else
+#define snd_memory_init() /*NOP*/
+#define snd_memory_done() /*NOP*/
+#define snd_memory_info_init() /*NOP*/
+#define snd_memory_info_done() /*NOP*/
+#define kmalloc_nocheck(size, flags) kmalloc(size, flags)
+#define vmalloc_nocheck(size) vmalloc(size)
+#define kfree_nocheck(obj) kfree(obj)
+#define vfree_nocheck(obj) vfree(obj)
+#endif
+char *snd_kmalloc_strdup(const char *string, int flags);
+int copy_to_user_fromio(void __user *dst, const volatile void __iomem *src, size_t count);
+int copy_from_user_toio(volatile void __iomem *dst, const void __user *src, size_t count);
+
+/* init.c */
+
+extern unsigned int snd_cards_lock;
+extern snd_card_t *snd_cards[SNDRV_CARDS];
+extern rwlock_t snd_card_rwlock;
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+#define SND_MIXER_OSS_NOTIFY_REGISTER	0
+#define SND_MIXER_OSS_NOTIFY_DISCONNECT	1
+#define SND_MIXER_OSS_NOTIFY_FREE	2
+extern int (*snd_mixer_oss_notify_callback)(snd_card_t *card, int cmd);
+#endif
+
+snd_card_t *snd_card_new(int idx, const char *id,
+			 struct module *module, int extra_size);
+int snd_card_disconnect(snd_card_t *card);
+int snd_card_free(snd_card_t *card);
+int snd_card_free_in_thread(snd_card_t *card);
+int snd_card_register(snd_card_t *card);
+int snd_card_info_init(void);
+int snd_card_info_done(void);
+int snd_component_add(snd_card_t *card, const char *component);
+int snd_card_file_add(snd_card_t *card, struct file *file);
+int snd_card_file_remove(snd_card_t *card, struct file *file);
+
+#ifndef snd_card_set_dev
+#define snd_card_set_dev(card,devptr) ((card)->dev = (devptr))
+#endif
+
+/* device.c */
+
+int snd_device_new(snd_card_t *card, snd_device_type_t type,
+		   void *device_data, snd_device_ops_t *ops);
+int snd_device_register(snd_card_t *card, void *device_data);
+int snd_device_register_all(snd_card_t *card);
+int snd_device_disconnect(snd_card_t *card, void *device_data);
+int snd_device_disconnect_all(snd_card_t *card);
+int snd_device_free(snd_card_t *card, void *device_data);
+int snd_device_free_all(snd_card_t *card, snd_device_cmd_t cmd);
+
+/* isadma.c */
+
+#define DMA_MODE_NO_ENABLE	0x0100
+
+void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
+void snd_dma_disable(unsigned long dma);
+unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
+
+/* misc.c */
+
+int snd_task_name(struct task_struct *task, char *name, size_t size);
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+void snd_verbose_printk(const char *file, int line, const char *format, ...)
+     __attribute__ ((format (printf, 3, 4)));
+#endif
+#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
+void snd_verbose_printd(const char *file, int line, const char *format, ...)
+     __attribute__ ((format (printf, 3, 4)));
+#endif
+
+/* --- */
+
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+/**
+ * snd_printk - printk wrapper
+ * @fmt: format string
+ *
+ * Works like print() but prints the file and the line of the caller
+ * when configured with CONFIG_SND_VERBOSE_PRINTK.
+ */
+#define snd_printk(fmt, args...) \
+	snd_verbose_printk(__FILE__, __LINE__, fmt ,##args)
+#else
+#define snd_printk(fmt, args...) \
+	printk(fmt ,##args)
+#endif
+
+#ifdef CONFIG_SND_DEBUG
+
+#define __ASTRING__(x) #x
+
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+/**
+ * snd_printd - debug printk
+ * @format: format string
+ *
+ * Compiled only when Works like snd_printk() for debugging purpose.
+ * Ignored when CONFIG_SND_DEBUG is not set.
+ */
+#define snd_printd(fmt, args...) \
+	snd_verbose_printd(__FILE__, __LINE__, fmt ,##args)
+#else
+#define snd_printd(fmt, args...) \
+	printk(fmt ,##args)
+#endif
+/**
+ * snd_assert - run-time assersion macro
+ * @expr: expression
+ * @args...: the action
+ *
+ * This macro checks the expression in run-time and invokes the commands
+ * given in the rest arguments if the assertion is failed.
+ * When CONFIG_SND_DEBUG is not set, the expression is executed but
+ * not checked.
+ */
+#define snd_assert(expr, args...) do {\
+	if (unlikely(!(expr))) {				\
+		snd_printk(KERN_ERR "BUG? (%s) (called from %p)\n", __ASTRING__(expr), __builtin_return_address(0));\
+		args;\
+	}\
+} while (0)
+/**
+ * snd_runtime_check - run-time assersion macro
+ * @expr: expression
+ * @args...: the action
+ *
+ * This macro checks the expression in run-time and invokes the commands
+ * given in the rest arguments if the assertion is failed.
+ * Unlike snd_assert(), the action commands are executed even if
+ * CONFIG_SND_DEBUG is not set but without any error messages.
+ */
+#define snd_runtime_check(expr, args...) do {\
+	if (unlikely(!(expr))) {				\
+		snd_printk(KERN_ERR "ERROR (%s) (called from %p)\n", __ASTRING__(expr), __builtin_return_address(0));\
+		args;\
+	}\
+} while (0)
+
+#else /* !CONFIG_SND_DEBUG */
+
+#define snd_printd(fmt, args...)	/* nothing */
+#define snd_assert(expr, args...)	(void)(expr)
+#define snd_runtime_check(expr, args...) do { if (!(expr)) { args; } } while (0)
+
+#endif /* CONFIG_SND_DEBUG */
+
+#ifdef CONFIG_SND_DEBUG_DETECT
+/**
+ * snd_printdd - debug printk
+ * @format: format string
+ *
+ * Compiled only when Works like snd_printk() for debugging purpose.
+ * Ignored when CONFIG_SND_DEBUG_DETECT is not set.
+ */
+#define snd_printdd(format, args...) snd_printk(format, ##args)
+#else
+#define snd_printdd(format, args...) /* nothing */
+#endif
+
+#define snd_BUG() snd_assert(0, )
+
+
+static inline void snd_timestamp_now(struct timespec *tstamp, int timespec)
+{
+	struct timeval val;
+	/* FIXME: use a linear time source */
+	do_gettimeofday(&val);
+	tstamp->tv_sec = val.tv_sec;
+	tstamp->tv_nsec = val.tv_usec;
+	if (timespec)
+		tstamp->tv_nsec *= 1000L;
+}
+
+static inline void snd_timestamp_zero(struct timespec *tstamp)
+{
+	tstamp->tv_sec = 0;
+	tstamp->tv_nsec = 0;
+}
+
+static inline int snd_timestamp_null(struct timespec *tstamp)
+{
+	return tstamp->tv_sec == 0 && tstamp->tv_nsec == 0;
+}
+
+#define SNDRV_OSS_VERSION         ((3<<16)|(8<<8)|(1<<4)|(0))	/* 3.8.1a */
+
+/* for easier backward-porting */
+#if defined(CONFIG_GAMEPORT) || defined(CONFIG_GAMEPORT_MODULE)
+#ifndef gameport_set_dev_parent
+#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
+#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
+#define gameport_get_port_data(gp) (gp)->port_data
+#endif
+#endif
+
+#endif /* __SOUND_CORE_H */
diff --git a/include/sound/cs4231.h b/include/sound/cs4231.h
new file mode 100644
index 000000000000..d7f90823778a
--- /dev/null
+++ b/include/sound/cs4231.h
@@ -0,0 +1,366 @@
+#ifndef __SOUND_CS4231_H
+#define __SOUND_CS4231_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *  Definitions for CS4231 & InterWave chips & compatible chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "control.h"
+#include "pcm.h"
+#include "timer.h"
+
+#ifdef CONFIG_SBUS
+#define SBUS_SUPPORT
+#include <asm/sbus.h>
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_SPARC64)
+#define EBUS_SUPPORT
+#include <linux/pci.h>
+#include <asm/ebus.h>
+#endif
+
+#if !defined(SBUS_SUPPORT) && !defined(EBUS_SUPPORT)
+#define LEGACY_SUPPORT
+#endif
+
+/* IO ports */
+
+#define CS4231P(x)		(c_d_c_CS4231##x)
+
+#define c_d_c_CS4231REGSEL	0
+#define c_d_c_CS4231REG		1
+#define c_d_c_CS4231STATUS	2
+#define c_d_c_CS4231PIO		3
+
+/* codec registers */
+
+#define CS4231_LEFT_INPUT	0x00	/* left input control */
+#define CS4231_RIGHT_INPUT	0x01	/* right input control */
+#define CS4231_AUX1_LEFT_INPUT	0x02	/* left AUX1 input control */
+#define CS4231_AUX1_RIGHT_INPUT	0x03	/* right AUX1 input control */
+#define CS4231_AUX2_LEFT_INPUT	0x04	/* left AUX2 input control */
+#define CS4231_AUX2_RIGHT_INPUT	0x05	/* right AUX2 input control */
+#define CS4231_LEFT_OUTPUT	0x06	/* left output control register */
+#define CS4231_RIGHT_OUTPUT	0x07	/* right output control register */
+#define CS4231_PLAYBK_FORMAT	0x08	/* clock and data format - playback - bits 7-0 MCE */
+#define CS4231_IFACE_CTRL	0x09	/* interface control - bits 7-2 MCE */
+#define CS4231_PIN_CTRL		0x0a	/* pin control */
+#define CS4231_TEST_INIT	0x0b	/* test and initialization */
+#define CS4231_MISC_INFO	0x0c	/* miscellaneaous information */
+#define CS4231_LOOPBACK		0x0d	/* loopback control */
+#define CS4231_PLY_UPR_CNT	0x0e	/* playback upper base count */
+#define CS4231_PLY_LWR_CNT	0x0f	/* playback lower base count */
+#define CS4231_ALT_FEATURE_1	0x10	/* alternate #1 feature enable */
+#define AD1845_AF1_MIC_LEFT	0x10	/* alternate #1 feature + MIC left */
+#define CS4231_ALT_FEATURE_2	0x11	/* alternate #2 feature enable */
+#define AD1845_AF2_MIC_RIGHT	0x11	/* alternate #2 feature + MIC right */
+#define CS4231_LEFT_LINE_IN	0x12	/* left line input control */
+#define CS4231_RIGHT_LINE_IN	0x13	/* right line input control */
+#define CS4231_TIMER_LOW	0x14	/* timer low byte */
+#define CS4231_TIMER_HIGH	0x15	/* timer high byte */
+#define CS4231_LEFT_MIC_INPUT	0x16	/* left MIC input control register (InterWave only) */
+#define AD1845_UPR_FREQ_SEL	0x16	/* upper byte of frequency select */
+#define CS4231_RIGHT_MIC_INPUT	0x17	/* right MIC input control register (InterWave only) */
+#define AD1845_LWR_FREQ_SEL	0x17	/* lower byte of frequency select */
+#define CS4236_EXT_REG		0x17	/* extended register access */
+#define CS4231_IRQ_STATUS	0x18	/* irq status register */
+#define CS4231_LINE_LEFT_OUTPUT	0x19	/* left line output control register (InterWave only) */
+#define CS4231_VERSION		0x19	/* CS4231(A) - version values */
+#define CS4231_MONO_CTRL	0x1a	/* mono input/output control */
+#define CS4231_LINE_RIGHT_OUTPUT 0x1b	/* right line output control register (InterWave only) */
+#define AD1845_PWR_DOWN		0x1b	/* power down control */
+#define CS4235_LEFT_MASTER	0x1b	/* left master output control */
+#define CS4231_REC_FORMAT	0x1c	/* clock and data format - record - bits 7-0 MCE */
+#define CS4231_PLY_VAR_FREQ	0x1d	/* playback variable frequency */
+#define AD1845_CLOCK		0x1d	/* crystal clock select and total power down */
+#define CS4235_RIGHT_MASTER	0x1d	/* right master output control */
+#define CS4231_REC_UPR_CNT	0x1e	/* record upper count */
+#define CS4231_REC_LWR_CNT	0x1f	/* record lower count */
+
+/* definitions for codec register select port - CODECP( REGSEL ) */
+
+#define CS4231_INIT		0x80	/* CODEC is initializing */
+#define CS4231_MCE		0x40	/* mode change enable */
+#define CS4231_TRD		0x20	/* transfer request disable */
+
+/* definitions for codec status register - CODECP( STATUS ) */
+
+#define CS4231_GLOBALIRQ	0x01	/* IRQ is active */
+
+/* definitions for codec irq status */
+
+#define CS4231_PLAYBACK_IRQ	0x10
+#define CS4231_RECORD_IRQ	0x20
+#define CS4231_TIMER_IRQ	0x40
+#define CS4231_ALL_IRQS		0x70
+#define CS4231_REC_UNDERRUN	0x08
+#define CS4231_REC_OVERRUN	0x04
+#define CS4231_PLY_OVERRUN	0x02
+#define CS4231_PLY_UNDERRUN	0x01
+
+/* definitions for CS4231_LEFT_INPUT and CS4231_RIGHT_INPUT registers */
+
+#define CS4231_ENABLE_MIC_GAIN	0x20
+
+#define CS4231_MIXS_LINE	0x00
+#define CS4231_MIXS_AUX1	0x40
+#define CS4231_MIXS_MIC		0x80
+#define CS4231_MIXS_ALL		0xc0
+
+/* definitions for clock and data format register - CS4231_PLAYBK_FORMAT */
+
+#define CS4231_LINEAR_8		0x00	/* 8-bit unsigned data */
+#define CS4231_ALAW_8		0x60	/* 8-bit A-law companded */
+#define CS4231_ULAW_8		0x20	/* 8-bit U-law companded */
+#define CS4231_LINEAR_16	0x40	/* 16-bit twos complement data - little endian */
+#define CS4231_LINEAR_16_BIG	0xc0	/* 16-bit twos complement data - big endian */
+#define CS4231_ADPCM_16		0xa0	/* 16-bit ADPCM */
+#define CS4231_STEREO		0x10	/* stereo mode */
+/* bits 3-1 define frequency divisor */
+#define CS4231_XTAL1		0x00	/* 24.576 crystal */
+#define CS4231_XTAL2		0x01	/* 16.9344 crystal */
+
+/* definitions for interface control register - CS4231_IFACE_CTRL */
+
+#define CS4231_RECORD_PIO	0x80	/* record PIO enable */
+#define CS4231_PLAYBACK_PIO	0x40	/* playback PIO enable */
+#define CS4231_CALIB_MODE	0x18	/* calibration mode bits */
+#define CS4231_AUTOCALIB	0x08	/* auto calibrate */
+#define CS4231_SINGLE_DMA	0x04	/* use single DMA channel */
+#define CS4231_RECORD_ENABLE	0x02	/* record enable */
+#define CS4231_PLAYBACK_ENABLE	0x01	/* playback enable */
+
+/* definitions for pin control register - CS4231_PIN_CTRL */
+
+#define CS4231_IRQ_ENABLE	0x02	/* enable IRQ */
+#define CS4231_XCTL1		0x40	/* external control #1 */
+#define CS4231_XCTL0		0x80	/* external control #0 */
+
+/* definitions for test and init register - CS4231_TEST_INIT */
+
+#define CS4231_CALIB_IN_PROGRESS 0x20	/* auto calibrate in progress */
+#define CS4231_DMA_REQUEST	0x10	/* DMA request in progress */
+
+/* definitions for misc control register - CS4231_MISC_INFO */
+
+#define CS4231_MODE2		0x40	/* MODE 2 */
+#define CS4231_IW_MODE3		0x6c	/* MODE 3 - InterWave enhanced mode */
+#define CS4231_4236_MODE3	0xe0	/* MODE 3 - CS4236+ enhanced mode */
+
+/* definitions for alternate feature 1 register - CS4231_ALT_FEATURE_1 */
+
+#define	CS4231_DACZ		0x01	/* zero DAC when underrun */
+#define CS4231_TIMER_ENABLE	0x40	/* codec timer enable */
+#define CS4231_OLB		0x80	/* output level bit */
+
+/* definitions for Extended Registers - CS4236+ */
+
+#define CS4236_REG(i23val)	(((i23val << 2) & 0x10) | ((i23val >> 4) & 0x0f))
+#define CS4236_I23VAL(reg)	((((reg)&0xf) << 4) | (((reg)&0x10) >> 2) | 0x8)
+
+#define CS4236_LEFT_LINE	0x08	/* left LINE alternate volume */
+#define CS4236_RIGHT_LINE	0x18	/* right LINE alternate volume */
+#define CS4236_LEFT_MIC		0x28	/* left MIC volume */
+#define CS4236_RIGHT_MIC	0x38	/* right MIC volume */
+#define CS4236_LEFT_MIX_CTRL	0x48	/* synthesis and left input mixer control */
+#define CS4236_RIGHT_MIX_CTRL	0x58	/* right input mixer control */
+#define CS4236_LEFT_FM		0x68	/* left FM volume */
+#define CS4236_RIGHT_FM		0x78	/* right FM volume */
+#define CS4236_LEFT_DSP		0x88	/* left DSP serial port volume */
+#define CS4236_RIGHT_DSP	0x98	/* right DSP serial port volume */
+#define CS4236_RIGHT_LOOPBACK	0xa8	/* right loopback monitor volume */
+#define CS4236_DAC_MUTE		0xb8	/* DAC mute and IFSE enable */
+#define CS4236_ADC_RATE		0xc8	/* indenpendent ADC sample frequency */
+#define CS4236_DAC_RATE		0xd8	/* indenpendent DAC sample frequency */
+#define CS4236_LEFT_MASTER	0xe8	/* left master digital audio volume */
+#define CS4236_RIGHT_MASTER	0xf8	/* right master digital audio volume */
+#define CS4236_LEFT_WAVE	0x0c	/* left wavetable serial port volume */
+#define CS4236_RIGHT_WAVE	0x1c	/* right wavetable serial port volume */
+#define CS4236_VERSION		0x9c	/* chip version and ID */
+
+/* defines for codec.mode */
+
+#define CS4231_MODE_NONE	0x0000
+#define CS4231_MODE_PLAY	0x0001
+#define CS4231_MODE_RECORD	0x0002
+#define CS4231_MODE_TIMER	0x0004
+#define CS4231_MODE_OPEN	(CS4231_MODE_PLAY|CS4231_MODE_RECORD|CS4231_MODE_TIMER)
+
+/* defines for codec.hardware */
+
+#define CS4231_HW_DETECT        0x0000	/* let CS4231 driver detect chip */
+#define CS4231_HW_DETECT3	0x0001	/* allow mode 3 */
+#define CS4231_HW_TYPE_MASK	0xff00	/* type mask */
+#define CS4231_HW_CS4231_MASK   0x0100	/* CS4231 serie */
+#define CS4231_HW_CS4231        0x0100	/* CS4231 chip */
+#define CS4231_HW_CS4231A       0x0101	/* CS4231A chip */
+#define CS4231_HW_AD1845	0x0102	/* AD1845 chip */
+#define CS4231_HW_CS4232_MASK   0x0200	/* CS4232 serie (has control ports) */
+#define CS4231_HW_CS4232        0x0200	/* CS4232 */
+#define CS4231_HW_CS4232A       0x0201	/* CS4232A */
+#define CS4231_HW_CS4236	0x0202	/* CS4236 */
+#define CS4231_HW_CS4236B_MASK	0x0400	/* CS4236B serie (has extended control regs) */
+#define CS4231_HW_CS4235	0x0400	/* CS4235 - Crystal Clear (tm) stereo enhancement */
+#define CS4231_HW_CS4236B       0x0401	/* CS4236B */
+#define CS4231_HW_CS4237B       0x0402	/* CS4237B - SRS 3D */
+#define CS4231_HW_CS4238B	0x0403	/* CS4238B - QSOUND 3D */
+#define CS4231_HW_CS4239	0x0404	/* CS4239 - Crystal Clear (tm) stereo enhancement */
+/* compatible, but clones */
+#define CS4231_HW_INTERWAVE     0x1000	/* InterWave chip */
+#define CS4231_HW_OPL3SA2       0x1001	/* OPL3-SA2 chip */
+
+/* defines for codec.hwshare */
+#define CS4231_HWSHARE_IRQ	(1<<0)
+#define CS4231_HWSHARE_DMA1	(1<<1)
+#define CS4231_HWSHARE_DMA2	(1<<2)
+
+typedef struct _snd_cs4231 cs4231_t;
+
+struct _snd_cs4231 {
+	unsigned long port;		/* base i/o port */
+#ifdef LEGACY_SUPPORT
+	struct resource *res_port;
+	unsigned long cport;		/* control base i/o port (CS4236) */
+	struct resource *res_cport;
+	int irq;			/* IRQ line */
+	int dma1;			/* playback DMA */
+	int dma2;			/* record DMA */
+#endif
+	unsigned short version;		/* version of CODEC chip */
+	unsigned short mode;		/* see to CS4231_MODE_XXXX */
+	unsigned short hardware;	/* see to CS4231_HW_XXXX */
+	unsigned short hwshare;		/* shared resources */
+	unsigned short single_dma:1,	/* forced single DMA mode (GUS 16-bit daughter board) or dma1 == dma2 */
+		       ebus_flag:1;	/* SPARC: EBUS present */
+
+#ifdef EBUS_SUPPORT
+	struct ebus_dma_info eb2c;
+        struct ebus_dma_info eb2p;
+#endif
+
+#if defined(SBUS_SUPPORT) || defined(EBUS_SUPPORT)
+	union {
+#ifdef SBUS_SUPPORT
+		struct sbus_dev         *sdev;
+#endif
+#ifdef EBUS_SUPPORT
+		struct pci_dev          *pdev;
+#endif
+	} dev_u;
+	unsigned int p_periods_sent;
+	unsigned int c_periods_sent;
+#endif
+
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+	snd_timer_t *timer;
+
+	unsigned char image[32];	/* registers image */
+	unsigned char eimage[32];	/* extended registers image */
+	unsigned char cimage[16];	/* control registers image */
+	int mce_bit;
+	int calibrate_mute;
+	int sw_3d_bit;
+#ifdef LEGACY_SUPPORT
+	unsigned int p_dma_size;
+	unsigned int c_dma_size;
+#endif
+
+	spinlock_t reg_lock;
+	struct semaphore mce_mutex;
+	struct semaphore open_mutex;
+
+	int (*rate_constraint) (snd_pcm_runtime_t *runtime);
+	void (*set_playback_format) (cs4231_t *chip, snd_pcm_hw_params_t *hw_params, unsigned char pdfr);
+	void (*set_capture_format) (cs4231_t *chip, snd_pcm_hw_params_t *hw_params, unsigned char cdfr);
+	void (*trigger) (cs4231_t *chip, unsigned int what, int start);
+#ifdef CONFIG_PM
+	void (*suspend) (cs4231_t *chip);
+	void (*resume) (cs4231_t *chip);
+#endif
+	void *dma_private_data;
+#ifdef LEGACY_SUPPORT
+	int (*claim_dma) (cs4231_t *chip, void *dma_private_data, int dma);
+	int (*release_dma) (cs4231_t *chip, void *dma_private_data, int dma);
+#endif
+};
+
+/* exported functions */
+
+void snd_cs4231_out(cs4231_t *chip, unsigned char reg, unsigned char val);
+unsigned char snd_cs4231_in(cs4231_t *chip, unsigned char reg);
+void snd_cs4236_ext_out(cs4231_t *chip, unsigned char reg, unsigned char val);
+unsigned char snd_cs4236_ext_in(cs4231_t *chip, unsigned char reg);
+void snd_cs4231_mce_up(cs4231_t *chip);
+void snd_cs4231_mce_down(cs4231_t *chip);
+
+irqreturn_t snd_cs4231_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+const char *snd_cs4231_chip_id(cs4231_t *chip);
+
+int snd_cs4231_create(snd_card_t * card,
+		      unsigned long port,
+		      unsigned long cport,
+		      int irq, int dma1, int dma2,
+		      unsigned short hardware,
+		      unsigned short hwshare,
+		      cs4231_t ** rchip);
+int snd_cs4231_pcm(cs4231_t * chip, int device, snd_pcm_t **rpcm);
+int snd_cs4231_timer(cs4231_t * chip, int device, snd_timer_t **rtimer);
+int snd_cs4231_mixer(cs4231_t * chip);
+
+int snd_cs4236_create(snd_card_t * card,
+		      unsigned long port,
+		      unsigned long cport,
+		      int irq, int dma1, int dma2,
+		      unsigned short hardware,
+		      unsigned short hwshare,
+		      cs4231_t ** rchip);
+int snd_cs4236_pcm(cs4231_t * chip, int device, snd_pcm_t **rpcm);
+int snd_cs4236_mixer(cs4231_t * chip);
+
+/*
+ *  mixer library
+ */
+
+#define CS4231_SINGLE(xname, xindex, reg, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .info = snd_cs4231_info_single, \
+  .get = snd_cs4231_get_single, .put = snd_cs4231_put_single, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
+
+int snd_cs4231_info_single(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo);
+int snd_cs4231_get_single(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+int snd_cs4231_put_single(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+
+#define CS4231_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .info = snd_cs4231_info_double, \
+  .get = snd_cs4231_get_double, .put = snd_cs4231_put_double, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
+
+int snd_cs4231_info_double(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo);
+int snd_cs4231_get_double(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+int snd_cs4231_put_double(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol);
+
+#endif /* __SOUND_CS4231_H */
diff --git a/include/sound/cs46xx.h b/include/sound/cs46xx.h
new file mode 100644
index 000000000000..182dd276ee74
--- /dev/null
+++ b/include/sound/cs46xx.h
@@ -0,0 +1,1756 @@
+#ifndef __SOUND_CS46XX_H
+#define __SOUND_CS46XX_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *		     Cirrus Logic, Inc.
+ *  Definitions for Cirrus Logic CS46xx chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "pcm-indirect.h"
+#include "rawmidi.h"
+#include "ac97_codec.h"
+#include "cs46xx_dsp_spos.h"
+
+#ifndef PCI_VENDOR_ID_CIRRUS
+#define PCI_VENDOR_ID_CIRRUS            0x1013
+#endif
+#ifndef PCI_DEVICE_ID_CIRRUS_4610
+#define PCI_DEVICE_ID_CIRRUS_4610       0x6001
+#endif
+#ifndef PCI_DEVICE_ID_CIRRUS_4612
+#define PCI_DEVICE_ID_CIRRUS_4612       0x6003
+#endif
+#ifndef PCI_DEVICE_ID_CIRRUS_4615
+#define PCI_DEVICE_ID_CIRRUS_4615       0x6004
+#endif
+
+/*
+ *  Direct registers
+ */
+
+/*
+ *  The following define the offsets of the registers accessed via base address
+ *  register zero on the CS46xx part.
+ */
+#define BA0_HISR				0x00000000
+#define BA0_HSR0                                0x00000004
+#define BA0_HICR                                0x00000008
+#define BA0_DMSR                                0x00000100
+#define BA0_HSAR                                0x00000110
+#define BA0_HDAR                                0x00000114
+#define BA0_HDMR                                0x00000118
+#define BA0_HDCR                                0x0000011C
+#define BA0_PFMC                                0x00000200
+#define BA0_PFCV1                               0x00000204
+#define BA0_PFCV2                               0x00000208
+#define BA0_PCICFG00                            0x00000300
+#define BA0_PCICFG04                            0x00000304
+#define BA0_PCICFG08                            0x00000308
+#define BA0_PCICFG0C                            0x0000030C
+#define BA0_PCICFG10                            0x00000310
+#define BA0_PCICFG14                            0x00000314
+#define BA0_PCICFG18                            0x00000318
+#define BA0_PCICFG1C                            0x0000031C
+#define BA0_PCICFG20                            0x00000320
+#define BA0_PCICFG24                            0x00000324
+#define BA0_PCICFG28                            0x00000328
+#define BA0_PCICFG2C                            0x0000032C
+#define BA0_PCICFG30                            0x00000330
+#define BA0_PCICFG34                            0x00000334
+#define BA0_PCICFG38                            0x00000338
+#define BA0_PCICFG3C                            0x0000033C
+#define BA0_CLKCR1                              0x00000400
+#define BA0_CLKCR2                              0x00000404
+#define BA0_PLLM                                0x00000408
+#define BA0_PLLCC                               0x0000040C
+#define BA0_FRR                                 0x00000410 
+#define BA0_CFL1                                0x00000414
+#define BA0_CFL2                                0x00000418
+#define BA0_SERMC1                              0x00000420
+#define BA0_SERMC2                              0x00000424
+#define BA0_SERC1                               0x00000428
+#define BA0_SERC2                               0x0000042C
+#define BA0_SERC3                               0x00000430
+#define BA0_SERC4                               0x00000434
+#define BA0_SERC5                               0x00000438
+#define BA0_SERBSP                              0x0000043C
+#define BA0_SERBST                              0x00000440
+#define BA0_SERBCM                              0x00000444
+#define BA0_SERBAD                              0x00000448
+#define BA0_SERBCF                              0x0000044C
+#define BA0_SERBWP                              0x00000450
+#define BA0_SERBRP                              0x00000454
+#ifndef NO_CS4612
+#define BA0_ASER_FADDR                          0x00000458
+#endif
+#define BA0_ACCTL                               0x00000460
+#define BA0_ACSTS                               0x00000464
+#define BA0_ACOSV                               0x00000468
+#define BA0_ACCAD                               0x0000046C
+#define BA0_ACCDA                               0x00000470
+#define BA0_ACISV                               0x00000474
+#define BA0_ACSAD                               0x00000478
+#define BA0_ACSDA                               0x0000047C
+#define BA0_JSPT                                0x00000480
+#define BA0_JSCTL                               0x00000484
+#define BA0_JSC1                                0x00000488
+#define BA0_JSC2                                0x0000048C
+#define BA0_MIDCR                               0x00000490
+#define BA0_MIDSR                               0x00000494
+#define BA0_MIDWP                               0x00000498
+#define BA0_MIDRP                               0x0000049C
+#define BA0_JSIO                                0x000004A0
+#ifndef NO_CS4612
+#define BA0_ASER_MASTER                         0x000004A4
+#endif
+#define BA0_CFGI                                0x000004B0
+#define BA0_SSVID                               0x000004B4
+#define BA0_GPIOR                               0x000004B8
+#ifndef NO_CS4612
+#define BA0_EGPIODR                             0x000004BC
+#define BA0_EGPIOPTR                            0x000004C0
+#define BA0_EGPIOTR                             0x000004C4
+#define BA0_EGPIOWR                             0x000004C8
+#define BA0_EGPIOSR                             0x000004CC
+#define BA0_SERC6                               0x000004D0
+#define BA0_SERC7                               0x000004D4
+#define BA0_SERACC                              0x000004D8
+#define BA0_ACCTL2                              0x000004E0
+#define BA0_ACSTS2                              0x000004E4
+#define BA0_ACOSV2                              0x000004E8
+#define BA0_ACCAD2                              0x000004EC
+#define BA0_ACCDA2                              0x000004F0
+#define BA0_ACISV2                              0x000004F4
+#define BA0_ACSAD2                              0x000004F8
+#define BA0_ACSDA2                              0x000004FC
+#define BA0_IOTAC0                              0x00000500
+#define BA0_IOTAC1                              0x00000504
+#define BA0_IOTAC2                              0x00000508
+#define BA0_IOTAC3                              0x0000050C
+#define BA0_IOTAC4                              0x00000510
+#define BA0_IOTAC5                              0x00000514
+#define BA0_IOTAC6                              0x00000518
+#define BA0_IOTAC7                              0x0000051C
+#define BA0_IOTAC8                              0x00000520
+#define BA0_IOTAC9                              0x00000524
+#define BA0_IOTAC10                             0x00000528
+#define BA0_IOTAC11                             0x0000052C
+#define BA0_IOTFR0                              0x00000540
+#define BA0_IOTFR1                              0x00000544
+#define BA0_IOTFR2                              0x00000548
+#define BA0_IOTFR3                              0x0000054C
+#define BA0_IOTFR4                              0x00000550
+#define BA0_IOTFR5                              0x00000554
+#define BA0_IOTFR6                              0x00000558
+#define BA0_IOTFR7                              0x0000055C
+#define BA0_IOTFIFO                             0x00000580
+#define BA0_IOTRRD                              0x00000584
+#define BA0_IOTFP                               0x00000588
+#define BA0_IOTCR                               0x0000058C
+#define BA0_DPCID                               0x00000590
+#define BA0_DPCIA                               0x00000594
+#define BA0_DPCIC                               0x00000598
+#define BA0_PCPCIR                              0x00000600
+#define BA0_PCPCIG                              0x00000604
+#define BA0_PCPCIEN                             0x00000608
+#define BA0_EPCIPMC                             0x00000610
+#endif
+
+/*
+ *  The following define the offsets of the registers and memories accessed via
+ *  base address register one on the CS46xx part.
+ */
+#define BA1_SP_DMEM0                            0x00000000
+#define BA1_SP_DMEM1                            0x00010000
+#define BA1_SP_PMEM                             0x00020000
+#define BA1_SP_REG				0x00030000
+#define BA1_SPCR                                0x00030000
+#define BA1_DREG                                0x00030004
+#define BA1_DSRWP                               0x00030008
+#define BA1_TWPR                                0x0003000C
+#define BA1_SPWR                                0x00030010
+#define BA1_SPIR                                0x00030014
+#define BA1_FGR1                                0x00030020
+#define BA1_SPCS                                0x00030028
+#define BA1_SDSR                                0x0003002C
+#define BA1_FRMT                                0x00030030
+#define BA1_FRCC                                0x00030034
+#define BA1_FRSC                                0x00030038
+#define BA1_OMNI_MEM                            0x000E0000
+
+
+/*
+ *  The following defines are for the flags in the host interrupt status
+ *  register.
+ */
+#define HISR_VC_MASK                            0x0000FFFF
+#define HISR_VC0                                0x00000001
+#define HISR_VC1                                0x00000002
+#define HISR_VC2                                0x00000004
+#define HISR_VC3                                0x00000008
+#define HISR_VC4                                0x00000010
+#define HISR_VC5                                0x00000020
+#define HISR_VC6                                0x00000040
+#define HISR_VC7                                0x00000080
+#define HISR_VC8                                0x00000100
+#define HISR_VC9                                0x00000200
+#define HISR_VC10                               0x00000400
+#define HISR_VC11                               0x00000800
+#define HISR_VC12                               0x00001000
+#define HISR_VC13                               0x00002000
+#define HISR_VC14                               0x00004000
+#define HISR_VC15                               0x00008000
+#define HISR_INT0                               0x00010000
+#define HISR_INT1                               0x00020000
+#define HISR_DMAI                               0x00040000
+#define HISR_FROVR                              0x00080000
+#define HISR_MIDI                               0x00100000
+#ifdef NO_CS4612
+#define HISR_RESERVED                           0x0FE00000
+#else
+#define HISR_SBINT                              0x00200000
+#define HISR_RESERVED                           0x0FC00000
+#endif
+#define HISR_H0P                                0x40000000
+#define HISR_INTENA                             0x80000000
+
+/*
+ *  The following defines are for the flags in the host signal register 0.
+ */
+#define HSR0_VC_MASK                            0xFFFFFFFF
+#define HSR0_VC16                               0x00000001
+#define HSR0_VC17                               0x00000002
+#define HSR0_VC18                               0x00000004
+#define HSR0_VC19                               0x00000008
+#define HSR0_VC20                               0x00000010
+#define HSR0_VC21                               0x00000020
+#define HSR0_VC22                               0x00000040
+#define HSR0_VC23                               0x00000080
+#define HSR0_VC24                               0x00000100
+#define HSR0_VC25                               0x00000200
+#define HSR0_VC26                               0x00000400
+#define HSR0_VC27                               0x00000800
+#define HSR0_VC28                               0x00001000
+#define HSR0_VC29                               0x00002000
+#define HSR0_VC30                               0x00004000
+#define HSR0_VC31                               0x00008000
+#define HSR0_VC32                               0x00010000
+#define HSR0_VC33                               0x00020000
+#define HSR0_VC34                               0x00040000
+#define HSR0_VC35                               0x00080000
+#define HSR0_VC36                               0x00100000
+#define HSR0_VC37                               0x00200000
+#define HSR0_VC38                               0x00400000
+#define HSR0_VC39                               0x00800000
+#define HSR0_VC40                               0x01000000
+#define HSR0_VC41                               0x02000000
+#define HSR0_VC42                               0x04000000
+#define HSR0_VC43                               0x08000000
+#define HSR0_VC44                               0x10000000
+#define HSR0_VC45                               0x20000000
+#define HSR0_VC46                               0x40000000
+#define HSR0_VC47                               0x80000000
+
+/*
+ *  The following defines are for the flags in the host interrupt control
+ *  register.
+ */
+#define HICR_IEV                                0x00000001
+#define HICR_CHGM                               0x00000002
+
+/*
+ *  The following defines are for the flags in the DMA status register.
+ */
+#define DMSR_HP                                 0x00000001
+#define DMSR_HR                                 0x00000002
+#define DMSR_SP                                 0x00000004
+#define DMSR_SR                                 0x00000008
+
+/*
+ *  The following defines are for the flags in the host DMA source address
+ *  register.
+ */
+#define HSAR_HOST_ADDR_MASK                     0xFFFFFFFF
+#define HSAR_DSP_ADDR_MASK                      0x0000FFFF
+#define HSAR_MEMID_MASK                         0x000F0000
+#define HSAR_MEMID_SP_DMEM0                     0x00000000
+#define HSAR_MEMID_SP_DMEM1                     0x00010000
+#define HSAR_MEMID_SP_PMEM                      0x00020000
+#define HSAR_MEMID_SP_DEBUG                     0x00030000
+#define HSAR_MEMID_OMNI_MEM                     0x000E0000
+#define HSAR_END                                0x40000000
+#define HSAR_ERR                                0x80000000
+
+/*
+ *  The following defines are for the flags in the host DMA destination address
+ *  register.
+ */
+#define HDAR_HOST_ADDR_MASK                     0xFFFFFFFF
+#define HDAR_DSP_ADDR_MASK                      0x0000FFFF
+#define HDAR_MEMID_MASK                         0x000F0000
+#define HDAR_MEMID_SP_DMEM0                     0x00000000
+#define HDAR_MEMID_SP_DMEM1                     0x00010000
+#define HDAR_MEMID_SP_PMEM                      0x00020000
+#define HDAR_MEMID_SP_DEBUG                     0x00030000
+#define HDAR_MEMID_OMNI_MEM                     0x000E0000
+#define HDAR_END                                0x40000000
+#define HDAR_ERR                                0x80000000
+
+/*
+ *  The following defines are for the flags in the host DMA control register.
+ */
+#define HDMR_AC_MASK                            0x0000F000
+#define HDMR_AC_8_16                            0x00001000
+#define HDMR_AC_M_S                             0x00002000
+#define HDMR_AC_B_L                             0x00004000
+#define HDMR_AC_S_U                             0x00008000
+
+/*
+ *  The following defines are for the flags in the host DMA control register.
+ */
+#define HDCR_COUNT_MASK                         0x000003FF
+#define HDCR_DONE                               0x00004000
+#define HDCR_OPT                                0x00008000
+#define HDCR_WBD                                0x00400000
+#define HDCR_WBS                                0x00800000
+#define HDCR_DMS_MASK                           0x07000000
+#define HDCR_DMS_LINEAR                         0x00000000
+#define HDCR_DMS_16_DWORDS                      0x01000000
+#define HDCR_DMS_32_DWORDS                      0x02000000
+#define HDCR_DMS_64_DWORDS                      0x03000000
+#define HDCR_DMS_128_DWORDS                     0x04000000
+#define HDCR_DMS_256_DWORDS                     0x05000000
+#define HDCR_DMS_512_DWORDS                     0x06000000
+#define HDCR_DMS_1024_DWORDS                    0x07000000
+#define HDCR_DH                                 0x08000000
+#define HDCR_SMS_MASK                           0x70000000
+#define HDCR_SMS_LINEAR                         0x00000000
+#define HDCR_SMS_16_DWORDS                      0x10000000
+#define HDCR_SMS_32_DWORDS                      0x20000000
+#define HDCR_SMS_64_DWORDS                      0x30000000
+#define HDCR_SMS_128_DWORDS                     0x40000000
+#define HDCR_SMS_256_DWORDS                     0x50000000
+#define HDCR_SMS_512_DWORDS                     0x60000000
+#define HDCR_SMS_1024_DWORDS                    0x70000000
+#define HDCR_SH                                 0x80000000
+#define HDCR_COUNT_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the performance monitor control
+ *  register.
+ */
+#define PFMC_C1SS_MASK                          0x0000001F
+#define PFMC_C1EV                               0x00000020
+#define PFMC_C1RS                               0x00008000
+#define PFMC_C2SS_MASK                          0x001F0000
+#define PFMC_C2EV                               0x00200000
+#define PFMC_C2RS                               0x80000000
+#define PFMC_C1SS_SHIFT                         0
+#define PFMC_C2SS_SHIFT                         16
+#define PFMC_BUS_GRANT                          0
+#define PFMC_GRANT_AFTER_REQ                    1
+#define PFMC_TRANSACTION                        2
+#define PFMC_DWORD_TRANSFER                     3
+#define PFMC_SLAVE_READ                         4
+#define PFMC_SLAVE_WRITE                        5
+#define PFMC_PREEMPTION                         6
+#define PFMC_DISCONNECT_RETRY                   7
+#define PFMC_INTERRUPT                          8
+#define PFMC_BUS_OWNERSHIP                      9
+#define PFMC_TRANSACTION_LAG                    10
+#define PFMC_PCI_CLOCK                          11
+#define PFMC_SERIAL_CLOCK                       12
+#define PFMC_SP_CLOCK                           13
+
+/*
+ *  The following defines are for the flags in the performance counter value 1
+ *  register.
+ */
+#define PFCV1_PC1V_MASK                         0xFFFFFFFF
+#define PFCV1_PC1V_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the performance counter value 2
+ *  register.
+ */
+#define PFCV2_PC2V_MASK                         0xFFFFFFFF
+#define PFCV2_PC2V_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the clock control register 1.
+ */
+#define CLKCR1_OSCS                             0x00000001
+#define CLKCR1_OSCP                             0x00000002
+#define CLKCR1_PLLSS_MASK                       0x0000000C
+#define CLKCR1_PLLSS_SERIAL                     0x00000000
+#define CLKCR1_PLLSS_CRYSTAL                    0x00000004
+#define CLKCR1_PLLSS_PCI                        0x00000008
+#define CLKCR1_PLLSS_RESERVED                   0x0000000C
+#define CLKCR1_PLLP                             0x00000010
+#define CLKCR1_SWCE                             0x00000020
+#define CLKCR1_PLLOS                            0x00000040
+
+/*
+ *  The following defines are for the flags in the clock control register 2.
+ */
+#define CLKCR2_PDIVS_MASK                       0x0000000F
+#define CLKCR2_PDIVS_1                          0x00000001
+#define CLKCR2_PDIVS_2                          0x00000002
+#define CLKCR2_PDIVS_4                          0x00000004
+#define CLKCR2_PDIVS_7                          0x00000007
+#define CLKCR2_PDIVS_8                          0x00000008
+#define CLKCR2_PDIVS_16                         0x00000000
+
+/*
+ *  The following defines are for the flags in the PLL multiplier register.
+ */
+#define PLLM_MASK                               0x000000FF
+#define PLLM_SHIFT                              0
+
+/*
+ *  The following defines are for the flags in the PLL capacitor coefficient
+ *  register.
+ */
+#define PLLCC_CDR_MASK                          0x00000007
+#ifndef NO_CS4610
+#define PLLCC_CDR_240_350_MHZ                   0x00000000
+#define PLLCC_CDR_184_265_MHZ                   0x00000001
+#define PLLCC_CDR_144_205_MHZ                   0x00000002
+#define PLLCC_CDR_111_160_MHZ                   0x00000003
+#define PLLCC_CDR_87_123_MHZ                    0x00000004
+#define PLLCC_CDR_67_96_MHZ                     0x00000005
+#define PLLCC_CDR_52_74_MHZ                     0x00000006
+#define PLLCC_CDR_45_58_MHZ                     0x00000007
+#endif
+#ifndef NO_CS4612
+#define PLLCC_CDR_271_398_MHZ                   0x00000000
+#define PLLCC_CDR_227_330_MHZ                   0x00000001
+#define PLLCC_CDR_167_239_MHZ                   0x00000002
+#define PLLCC_CDR_150_215_MHZ                   0x00000003
+#define PLLCC_CDR_107_154_MHZ                   0x00000004
+#define PLLCC_CDR_98_140_MHZ                    0x00000005
+#define PLLCC_CDR_73_104_MHZ                    0x00000006
+#define PLLCC_CDR_63_90_MHZ                     0x00000007
+#endif
+#define PLLCC_LPF_MASK                          0x000000F8
+#ifndef NO_CS4610
+#define PLLCC_LPF_23850_60000_KHZ               0x00000000
+#define PLLCC_LPF_7960_26290_KHZ                0x00000008
+#define PLLCC_LPF_4160_10980_KHZ                0x00000018
+#define PLLCC_LPF_1740_4580_KHZ                 0x00000038
+#define PLLCC_LPF_724_1910_KHZ                  0x00000078
+#define PLLCC_LPF_317_798_KHZ                   0x000000F8
+#endif
+#ifndef NO_CS4612
+#define PLLCC_LPF_25580_64530_KHZ               0x00000000
+#define PLLCC_LPF_14360_37270_KHZ               0x00000008
+#define PLLCC_LPF_6100_16020_KHZ                0x00000018
+#define PLLCC_LPF_2540_6690_KHZ                 0x00000038
+#define PLLCC_LPF_1050_2780_KHZ                 0x00000078
+#define PLLCC_LPF_450_1160_KHZ                  0x000000F8
+#endif
+
+/*
+ *  The following defines are for the flags in the feature reporting register.
+ */
+#define FRR_FAB_MASK                            0x00000003
+#define FRR_MASK_MASK                           0x0000001C
+#ifdef NO_CS4612
+#define FRR_CFOP_MASK                           0x000000E0
+#else
+#define FRR_CFOP_MASK                           0x00000FE0
+#endif
+#define FRR_CFOP_NOT_DVD                        0x00000020
+#define FRR_CFOP_A3D                            0x00000040
+#define FRR_CFOP_128_PIN                        0x00000080
+#ifndef NO_CS4612
+#define FRR_CFOP_CS4280                         0x00000800
+#endif
+#define FRR_FAB_SHIFT                           0
+#define FRR_MASK_SHIFT                          2
+#define FRR_CFOP_SHIFT                          5
+
+/*
+ *  The following defines are for the flags in the configuration load 1
+ *  register.
+ */
+#define CFL1_CLOCK_SOURCE_MASK                  0x00000003
+#define CFL1_CLOCK_SOURCE_CS423X                0x00000000
+#define CFL1_CLOCK_SOURCE_AC97                  0x00000001
+#define CFL1_CLOCK_SOURCE_CRYSTAL               0x00000002
+#define CFL1_CLOCK_SOURCE_DUAL_AC97             0x00000003
+#define CFL1_VALID_DATA_MASK                    0x000000FF
+
+/*
+ *  The following defines are for the flags in the configuration load 2
+ *  register.
+ */
+#define CFL2_VALID_DATA_MASK                    0x000000FF
+
+/*
+ *  The following defines are for the flags in the serial port master control
+ *  register 1.
+ */
+#define SERMC1_MSPE                             0x00000001
+#define SERMC1_PTC_MASK                         0x0000000E
+#define SERMC1_PTC_CS423X                       0x00000000
+#define SERMC1_PTC_AC97                         0x00000002
+#define SERMC1_PTC_DAC                          0x00000004
+#define SERMC1_PLB                              0x00000010
+#define SERMC1_XLB                              0x00000020
+
+/*
+ *  The following defines are for the flags in the serial port master control
+ *  register 2.
+ */
+#define SERMC2_LROE                             0x00000001
+#define SERMC2_MCOE                             0x00000002
+#define SERMC2_MCDIV                            0x00000004
+
+/*
+ *  The following defines are for the flags in the serial port 1 configuration
+ *  register.
+ */
+#define SERC1_SO1EN                             0x00000001
+#define SERC1_SO1F_MASK                         0x0000000E
+#define SERC1_SO1F_CS423X                       0x00000000
+#define SERC1_SO1F_AC97                         0x00000002
+#define SERC1_SO1F_DAC                          0x00000004
+#define SERC1_SO1F_SPDIF                        0x00000006
+
+/*
+ *  The following defines are for the flags in the serial port 2 configuration
+ *  register.
+ */
+#define SERC2_SI1EN                             0x00000001
+#define SERC2_SI1F_MASK                         0x0000000E
+#define SERC2_SI1F_CS423X                       0x00000000
+#define SERC2_SI1F_AC97                         0x00000002
+#define SERC2_SI1F_ADC                          0x00000004
+#define SERC2_SI1F_SPDIF                        0x00000006
+
+/*
+ *  The following defines are for the flags in the serial port 3 configuration
+ *  register.
+ */
+#define SERC3_SO2EN                             0x00000001
+#define SERC3_SO2F_MASK                         0x00000006
+#define SERC3_SO2F_DAC                          0x00000000
+#define SERC3_SO2F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port 4 configuration
+ *  register.
+ */
+#define SERC4_SO3EN                             0x00000001
+#define SERC4_SO3F_MASK                         0x00000006
+#define SERC4_SO3F_DAC                          0x00000000
+#define SERC4_SO3F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port 5 configuration
+ *  register.
+ */
+#define SERC5_SI2EN                             0x00000001
+#define SERC5_SI2F_MASK                         0x00000006
+#define SERC5_SI2F_ADC                          0x00000000
+#define SERC5_SI2F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor sample
+ *  pointer register.
+ */
+#define SERBSP_FSP_MASK                         0x0000000F
+#define SERBSP_FSP_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor status
+ *  register.
+ */
+#define SERBST_RRDY                             0x00000001
+#define SERBST_WBSY                             0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor command
+ *  register.
+ */
+#define SERBCM_RDC                              0x00000001
+#define SERBCM_WRC                              0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor address
+ *  register.
+ */
+#ifdef NO_CS4612
+#define SERBAD_FAD_MASK                         0x000000FF
+#else
+#define SERBAD_FAD_MASK                         0x000001FF
+#endif
+#define SERBAD_FAD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor
+ *  configuration register.
+ */
+#define SERBCF_HBP                              0x00000001
+
+/*
+ *  The following defines are for the flags in the serial port backdoor write
+ *  port register.
+ */
+#define SERBWP_FWD_MASK                         0x000FFFFF
+#define SERBWP_FWD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor read
+ *  port register.
+ */
+#define SERBRP_FRD_MASK                         0x000FFFFF
+#define SERBRP_FRD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the async FIFO address register.
+ */
+#ifndef NO_CS4612
+#define ASER_FADDR_A1_MASK                      0x000001FF
+#define ASER_FADDR_EN1                          0x00008000
+#define ASER_FADDR_A2_MASK                      0x01FF0000
+#define ASER_FADDR_EN2                          0x80000000
+#define ASER_FADDR_A1_SHIFT                     0
+#define ASER_FADDR_A2_SHIFT                     16
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 control register.
+ */
+#define ACCTL_RSTN                              0x00000001
+#define ACCTL_ESYN                              0x00000002
+#define ACCTL_VFRM                              0x00000004
+#define ACCTL_DCV                               0x00000008
+#define ACCTL_CRW                               0x00000010
+#define ACCTL_ASYN                              0x00000020
+#ifndef NO_CS4612
+#define ACCTL_TC                                0x00000040
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status register.
+ */
+#define ACSTS_CRDY                              0x00000001
+#define ACSTS_VSTS                              0x00000002
+#ifndef NO_CS4612
+#define ACSTS_WKUP                              0x00000004
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 output slot valid
+ *  register.
+ */
+#define ACOSV_SLV3                              0x00000001
+#define ACOSV_SLV4                              0x00000002
+#define ACOSV_SLV5                              0x00000004
+#define ACOSV_SLV6                              0x00000008
+#define ACOSV_SLV7                              0x00000010
+#define ACOSV_SLV8                              0x00000020
+#define ACOSV_SLV9                              0x00000040
+#define ACOSV_SLV10                             0x00000080
+#define ACOSV_SLV11                             0x00000100
+#define ACOSV_SLV12                             0x00000200
+
+/*
+ *  The following defines are for the flags in the AC97 command address
+ *  register.
+ */
+#define ACCAD_CI_MASK                           0x0000007F
+#define ACCAD_CI_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 command data register.
+ */
+#define ACCDA_CD_MASK                           0x0000FFFF
+#define ACCDA_CD_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 input slot valid
+ *  register.
+ */
+#define ACISV_ISV3                              0x00000001
+#define ACISV_ISV4                              0x00000002
+#define ACISV_ISV5                              0x00000004
+#define ACISV_ISV6                              0x00000008
+#define ACISV_ISV7                              0x00000010
+#define ACISV_ISV8                              0x00000020
+#define ACISV_ISV9                              0x00000040
+#define ACISV_ISV10                             0x00000080
+#define ACISV_ISV11                             0x00000100
+#define ACISV_ISV12                             0x00000200
+
+/*
+ *  The following defines are for the flags in the AC97 status address
+ *  register.
+ */
+#define ACSAD_SI_MASK                           0x0000007F
+#define ACSAD_SI_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 status data register.
+ */
+#define ACSDA_SD_MASK                           0x0000FFFF
+#define ACSDA_SD_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the joystick poll/trigger
+ *  register.
+ */
+#define JSPT_CAX                                0x00000001
+#define JSPT_CAY                                0x00000002
+#define JSPT_CBX                                0x00000004
+#define JSPT_CBY                                0x00000008
+#define JSPT_BA1                                0x00000010
+#define JSPT_BA2                                0x00000020
+#define JSPT_BB1                                0x00000040
+#define JSPT_BB2                                0x00000080
+
+/*
+ *  The following defines are for the flags in the joystick control register.
+ */
+#define JSCTL_SP_MASK                           0x00000003
+#define JSCTL_SP_SLOW                           0x00000000
+#define JSCTL_SP_MEDIUM_SLOW                    0x00000001
+#define JSCTL_SP_MEDIUM_FAST                    0x00000002
+#define JSCTL_SP_FAST                           0x00000003
+#define JSCTL_ARE                               0x00000004
+
+/*
+ *  The following defines are for the flags in the joystick coordinate pair 1
+ *  readback register.
+ */
+#define JSC1_Y1V_MASK                           0x0000FFFF
+#define JSC1_X1V_MASK                           0xFFFF0000
+#define JSC1_Y1V_SHIFT                          0
+#define JSC1_X1V_SHIFT                          16
+
+/*
+ *  The following defines are for the flags in the joystick coordinate pair 2
+ *  readback register.
+ */
+#define JSC2_Y2V_MASK                           0x0000FFFF
+#define JSC2_X2V_MASK                           0xFFFF0000
+#define JSC2_Y2V_SHIFT                          0
+#define JSC2_X2V_SHIFT                          16
+
+/*
+ *  The following defines are for the flags in the MIDI control register.
+ */
+#define MIDCR_TXE                               0x00000001	/* Enable transmitting. */
+#define MIDCR_RXE                               0x00000002	/* Enable receiving. */
+#define MIDCR_RIE                               0x00000004	/* Interrupt upon tx ready. */
+#define MIDCR_TIE                               0x00000008	/* Interrupt upon rx ready. */
+#define MIDCR_MLB                               0x00000010	/* Enable midi loopback. */
+#define MIDCR_MRST                              0x00000020	/* Reset interface. */
+
+/*
+ *  The following defines are for the flags in the MIDI status register.
+ */
+#define MIDSR_TBF                               0x00000001	/* Tx FIFO is full. */
+#define MIDSR_RBE                               0x00000002	/* Rx FIFO is empty. */
+
+/*
+ *  The following defines are for the flags in the MIDI write port register.
+ */
+#define MIDWP_MWD_MASK                          0x000000FF
+#define MIDWP_MWD_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the MIDI read port register.
+ */
+#define MIDRP_MRD_MASK                          0x000000FF
+#define MIDRP_MRD_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the joystick GPIO register.
+ */
+#define JSIO_DAX                                0x00000001
+#define JSIO_DAY                                0x00000002
+#define JSIO_DBX                                0x00000004
+#define JSIO_DBY                                0x00000008
+#define JSIO_AXOE                               0x00000010
+#define JSIO_AYOE                               0x00000020
+#define JSIO_BXOE                               0x00000040
+#define JSIO_BYOE                               0x00000080
+
+/*
+ *  The following defines are for the flags in the master async/sync serial
+ *  port enable register.
+ */
+#ifndef NO_CS4612
+#define ASER_MASTER_ME                          0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the configuration interface
+ *  register.
+ */
+#define CFGI_CLK                                0x00000001
+#define CFGI_DOUT                               0x00000002
+#define CFGI_DIN_EEN                            0x00000004
+#define CFGI_EELD                               0x00000008
+
+/*
+ *  The following defines are for the flags in the subsystem ID and vendor ID
+ *  register.
+ */
+#define SSVID_VID_MASK                          0x0000FFFF
+#define SSVID_SID_MASK                          0xFFFF0000
+#define SSVID_VID_SHIFT                         0
+#define SSVID_SID_SHIFT                         16
+
+/*
+ *  The following defines are for the flags in the GPIO pin interface register.
+ */
+#define GPIOR_VOLDN                             0x00000001
+#define GPIOR_VOLUP                             0x00000002
+#define GPIOR_SI2D                              0x00000004
+#define GPIOR_SI2OE                             0x00000008
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin direction
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIODR_GPOE0                           0x00000001
+#define EGPIODR_GPOE1                           0x00000002
+#define EGPIODR_GPOE2                           0x00000004
+#define EGPIODR_GPOE3                           0x00000008
+#define EGPIODR_GPOE4                           0x00000010
+#define EGPIODR_GPOE5                           0x00000020
+#define EGPIODR_GPOE6                           0x00000040
+#define EGPIODR_GPOE7                           0x00000080
+#define EGPIODR_GPOE8                           0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin polarity/
+ *  type register.
+ */
+#ifndef NO_CS4612
+#define EGPIOPTR_GPPT0                          0x00000001
+#define EGPIOPTR_GPPT1                          0x00000002
+#define EGPIOPTR_GPPT2                          0x00000004
+#define EGPIOPTR_GPPT3                          0x00000008
+#define EGPIOPTR_GPPT4                          0x00000010
+#define EGPIOPTR_GPPT5                          0x00000020
+#define EGPIOPTR_GPPT6                          0x00000040
+#define EGPIOPTR_GPPT7                          0x00000080
+#define EGPIOPTR_GPPT8                          0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin sticky
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOTR_GPS0                            0x00000001
+#define EGPIOTR_GPS1                            0x00000002
+#define EGPIOTR_GPS2                            0x00000004
+#define EGPIOTR_GPS3                            0x00000008
+#define EGPIOTR_GPS4                            0x00000010
+#define EGPIOTR_GPS5                            0x00000020
+#define EGPIOTR_GPS6                            0x00000040
+#define EGPIOTR_GPS7                            0x00000080
+#define EGPIOTR_GPS8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO ping wakeup
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOWR_GPW0                            0x00000001
+#define EGPIOWR_GPW1                            0x00000002
+#define EGPIOWR_GPW2                            0x00000004
+#define EGPIOWR_GPW3                            0x00000008
+#define EGPIOWR_GPW4                            0x00000010
+#define EGPIOWR_GPW5                            0x00000020
+#define EGPIOWR_GPW6                            0x00000040
+#define EGPIOWR_GPW7                            0x00000080
+#define EGPIOWR_GPW8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin status
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOSR_GPS0                            0x00000001
+#define EGPIOSR_GPS1                            0x00000002
+#define EGPIOSR_GPS2                            0x00000004
+#define EGPIOSR_GPS3                            0x00000008
+#define EGPIOSR_GPS4                            0x00000010
+#define EGPIOSR_GPS5                            0x00000020
+#define EGPIOSR_GPS6                            0x00000040
+#define EGPIOSR_GPS7                            0x00000080
+#define EGPIOSR_GPS8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port 6 configuration
+ *  register.
+ */
+#ifndef NO_CS4612
+#define SERC6_ASDO2EN                           0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port 7 configuration
+ *  register.
+ */
+#ifndef NO_CS4612
+#define SERC7_ASDI2EN                           0x00000001
+#define SERC7_POSILB                            0x00000002
+#define SERC7_SIPOLB                            0x00000004
+#define SERC7_SOSILB                            0x00000008
+#define SERC7_SISOLB                            0x00000010
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port AC link
+ *  configuration register.
+ */
+#ifndef NO_CS4612
+#define SERACC_CHIP_TYPE_MASK                  0x00000001
+#define SERACC_CHIP_TYPE_1_03                  0x00000000
+#define SERACC_CHIP_TYPE_2_0                   0x00000001
+#define SERACC_TWO_CODECS                      0x00000002
+#define SERACC_MDM                             0x00000004
+#define SERACC_HSP                             0x00000008
+#define SERACC_ODT                             0x00000010 /* only CS4630 */
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 control register 2.
+ */
+#ifndef NO_CS4612
+#define ACCTL2_RSTN                             0x00000001
+#define ACCTL2_ESYN                             0x00000002
+#define ACCTL2_VFRM                             0x00000004
+#define ACCTL2_DCV                              0x00000008
+#define ACCTL2_CRW                              0x00000010
+#define ACCTL2_ASYN                             0x00000020
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status register 2.
+ */
+#ifndef NO_CS4612
+#define ACSTS2_CRDY                             0x00000001
+#define ACSTS2_VSTS                             0x00000002
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 output slot valid
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACOSV2_SLV3                             0x00000001
+#define ACOSV2_SLV4                             0x00000002
+#define ACOSV2_SLV5                             0x00000004
+#define ACOSV2_SLV6                             0x00000008
+#define ACOSV2_SLV7                             0x00000010
+#define ACOSV2_SLV8                             0x00000020
+#define ACOSV2_SLV9                             0x00000040
+#define ACOSV2_SLV10                            0x00000080
+#define ACOSV2_SLV11                            0x00000100
+#define ACOSV2_SLV12                            0x00000200
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 command address
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACCAD2_CI_MASK                          0x0000007F
+#define ACCAD2_CI_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 command data register
+ *  2.
+ */
+#ifndef NO_CS4612
+#define ACCDA2_CD_MASK                          0x0000FFFF
+#define ACCDA2_CD_SHIFT                         0  
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 input slot valid
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACISV2_ISV3                             0x00000001
+#define ACISV2_ISV4                             0x00000002
+#define ACISV2_ISV5                             0x00000004
+#define ACISV2_ISV6                             0x00000008
+#define ACISV2_ISV7                             0x00000010
+#define ACISV2_ISV8                             0x00000020
+#define ACISV2_ISV9                             0x00000040
+#define ACISV2_ISV10                            0x00000080
+#define ACISV2_ISV11                            0x00000100
+#define ACISV2_ISV12                            0x00000200
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status address
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACSAD2_SI_MASK                          0x0000007F
+#define ACSAD2_SI_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status data register 2.
+ */
+#ifndef NO_CS4612
+#define ACSDA2_SD_MASK                          0x0000FFFF
+#define ACSDA2_SD_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap address and control
+ *  registers (all 12).
+ */
+#ifndef NO_CS4612
+#define IOTAC_SA_MASK                           0x0000FFFF
+#define IOTAC_MSK_MASK                          0x000F0000
+#define IOTAC_IODC_MASK                         0x06000000
+#define IOTAC_IODC_16_BIT                       0x00000000
+#define IOTAC_IODC_10_BIT                       0x02000000
+#define IOTAC_IODC_12_BIT                       0x04000000
+#define IOTAC_WSPI                              0x08000000
+#define IOTAC_RSPI                              0x10000000
+#define IOTAC_WSE                               0x20000000
+#define IOTAC_WE                                0x40000000
+#define IOTAC_RE                                0x80000000
+#define IOTAC_SA_SHIFT                          0
+#define IOTAC_MSK_SHIFT                         16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap fast read registers
+ *  (all 8).
+ */
+#ifndef NO_CS4612
+#define IOTFR_D_MASK                            0x0000FFFF
+#define IOTFR_A_MASK                            0x000F0000
+#define IOTFR_R_MASK                            0x0F000000
+#define IOTFR_ALL                               0x40000000
+#define IOTFR_VL                                0x80000000
+#define IOTFR_D_SHIFT                           0
+#define IOTFR_A_SHIFT                           16
+#define IOTFR_R_SHIFT                           24
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap FIFO register.
+ */
+#ifndef NO_CS4612
+#define IOTFIFO_BA_MASK                         0x00003FFF
+#define IOTFIFO_S_MASK                          0x00FF0000
+#define IOTFIFO_OF                              0x40000000
+#define IOTFIFO_SPIOF                           0x80000000
+#define IOTFIFO_BA_SHIFT                        0
+#define IOTFIFO_S_SHIFT                         16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap retry read data
+ *  register.
+ */
+#ifndef NO_CS4612
+#define IOTRRD_D_MASK                           0x0000FFFF
+#define IOTRRD_RDV                              0x80000000
+#define IOTRRD_D_SHIFT                          0
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap FIFO pointer
+ *  register.
+ */
+#ifndef NO_CS4612
+#define IOTFP_CA_MASK                           0x00003FFF
+#define IOTFP_PA_MASK                           0x3FFF0000
+#define IOTFP_CA_SHIFT                          0
+#define IOTFP_PA_SHIFT                          16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap control register.
+ */
+#ifndef NO_CS4612
+#define IOTCR_ITD                               0x00000001
+#define IOTCR_HRV                               0x00000002
+#define IOTCR_SRV                               0x00000004
+#define IOTCR_DTI                               0x00000008
+#define IOTCR_DFI                               0x00000010
+#define IOTCR_DDP                               0x00000020
+#define IOTCR_JTE                               0x00000040
+#define IOTCR_PPE                               0x00000080
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI data register.
+ */
+#ifndef NO_CS4612
+#define DPCID_D_MASK                            0xFFFFFFFF
+#define DPCID_D_SHIFT                           0
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI address register.
+ */
+#ifndef NO_CS4612
+#define DPCIA_A_MASK                            0xFFFFFFFF
+#define DPCIA_A_SHIFT                           0
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI command register.
+ */
+#ifndef NO_CS4612
+#define DPCIC_C_MASK                            0x0000000F
+#define DPCIC_C_IOREAD                          0x00000002
+#define DPCIC_C_IOWRITE                         0x00000003
+#define DPCIC_BE_MASK                           0x000000F0
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI request register.
+ */
+#ifndef NO_CS4612
+#define PCPCIR_RDC_MASK                         0x00000007
+#define PCPCIR_C_MASK                           0x00007000
+#define PCPCIR_REQ                              0x00008000
+#define PCPCIR_RDC_SHIFT                        0
+#define PCPCIR_C_SHIFT                          12
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI grant register.
+ */ 
+#ifndef NO_CS4612
+#define PCPCIG_GDC_MASK                         0x00000007
+#define PCPCIG_VL                               0x00008000
+#define PCPCIG_GDC_SHIFT                        0
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI master enable
+ *  register.
+ */
+#ifndef NO_CS4612
+#define PCPCIEN_EN                              0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the extended PCI power
+ *  management control register.
+ */
+#ifndef NO_CS4612
+#define EPCIPMC_GWU                             0x00000001
+#define EPCIPMC_FSPC                            0x00000002
+#endif 
+
+/*
+ *  The following defines are for the flags in the SP control register.
+ */
+#define SPCR_RUN                                0x00000001
+#define SPCR_STPFR                              0x00000002
+#define SPCR_RUNFR                              0x00000004
+#define SPCR_TICK                               0x00000008
+#define SPCR_DRQEN                              0x00000020
+#define SPCR_RSTSP                              0x00000040
+#define SPCR_OREN                               0x00000080
+#ifndef NO_CS4612
+#define SPCR_PCIINT                             0x00000100
+#define SPCR_OINTD                              0x00000200
+#define SPCR_CRE                                0x00008000
+#endif
+
+/*
+ *  The following defines are for the flags in the debug index register.
+ */
+#define DREG_REGID_MASK                         0x0000007F
+#define DREG_DEBUG                              0x00000080
+#define DREG_RGBK_MASK                          0x00000700
+#define DREG_TRAP                               0x00000800
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_TRAPX                              0x00001000
+#endif
+#endif
+#define DREG_REGID_SHIFT                        0
+#define DREG_RGBK_SHIFT                         8
+#define DREG_RGBK_REGID_MASK                    0x0000077F
+#define DREG_REGID_R0                           0x00000010
+#define DREG_REGID_R1                           0x00000011
+#define DREG_REGID_R2                           0x00000012
+#define DREG_REGID_R3                           0x00000013
+#define DREG_REGID_R4                           0x00000014
+#define DREG_REGID_R5                           0x00000015
+#define DREG_REGID_R6                           0x00000016
+#define DREG_REGID_R7                           0x00000017
+#define DREG_REGID_R8                           0x00000018
+#define DREG_REGID_R9                           0x00000019
+#define DREG_REGID_RA                           0x0000001A
+#define DREG_REGID_RB                           0x0000001B
+#define DREG_REGID_RC                           0x0000001C
+#define DREG_REGID_RD                           0x0000001D
+#define DREG_REGID_RE                           0x0000001E
+#define DREG_REGID_RF                           0x0000001F
+#define DREG_REGID_RA_BUS_LOW                   0x00000020
+#define DREG_REGID_RA_BUS_HIGH                  0x00000038
+#define DREG_REGID_YBUS_LOW                     0x00000050
+#define DREG_REGID_YBUS_HIGH                    0x00000058
+#define DREG_REGID_TRAP_0                       0x00000100
+#define DREG_REGID_TRAP_1                       0x00000101
+#define DREG_REGID_TRAP_2                       0x00000102
+#define DREG_REGID_TRAP_3                       0x00000103
+#define DREG_REGID_TRAP_4                       0x00000104
+#define DREG_REGID_TRAP_5                       0x00000105
+#define DREG_REGID_TRAP_6                       0x00000106
+#define DREG_REGID_TRAP_7                       0x00000107
+#define DREG_REGID_INDIRECT_ADDRESS             0x0000010E
+#define DREG_REGID_TOP_OF_STACK                 0x0000010F
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_8                       0x00000110
+#define DREG_REGID_TRAP_9                       0x00000111
+#define DREG_REGID_TRAP_10                      0x00000112
+#define DREG_REGID_TRAP_11                      0x00000113
+#define DREG_REGID_TRAP_12                      0x00000114
+#define DREG_REGID_TRAP_13                      0x00000115
+#define DREG_REGID_TRAP_14                      0x00000116
+#define DREG_REGID_TRAP_15                      0x00000117
+#define DREG_REGID_TRAP_16                      0x00000118
+#define DREG_REGID_TRAP_17                      0x00000119
+#define DREG_REGID_TRAP_18                      0x0000011A
+#define DREG_REGID_TRAP_19                      0x0000011B
+#define DREG_REGID_TRAP_20                      0x0000011C
+#define DREG_REGID_TRAP_21                      0x0000011D
+#define DREG_REGID_TRAP_22                      0x0000011E
+#define DREG_REGID_TRAP_23                      0x0000011F
+#endif
+#endif
+#define DREG_REGID_RSA0_LOW                     0x00000200
+#define DREG_REGID_RSA0_HIGH                    0x00000201
+#define DREG_REGID_RSA1_LOW                     0x00000202
+#define DREG_REGID_RSA1_HIGH                    0x00000203
+#define DREG_REGID_RSA2                         0x00000204
+#define DREG_REGID_RSA3                         0x00000205
+#define DREG_REGID_RSI0_LOW                     0x00000206
+#define DREG_REGID_RSI0_HIGH                    0x00000207
+#define DREG_REGID_RSI1                         0x00000208
+#define DREG_REGID_RSI2                         0x00000209
+#define DREG_REGID_SAGUSTATUS                   0x0000020A
+#define DREG_REGID_RSCONFIG01_LOW               0x0000020B
+#define DREG_REGID_RSCONFIG01_HIGH              0x0000020C
+#define DREG_REGID_RSCONFIG23_LOW               0x0000020D
+#define DREG_REGID_RSCONFIG23_HIGH              0x0000020E
+#define DREG_REGID_RSDMA01E                     0x0000020F
+#define DREG_REGID_RSDMA23E                     0x00000210
+#define DREG_REGID_RSD0_LOW                     0x00000211
+#define DREG_REGID_RSD0_HIGH                    0x00000212
+#define DREG_REGID_RSD1_LOW                     0x00000213
+#define DREG_REGID_RSD1_HIGH                    0x00000214
+#define DREG_REGID_RSD2_LOW                     0x00000215
+#define DREG_REGID_RSD2_HIGH                    0x00000216
+#define DREG_REGID_RSD3_LOW                     0x00000217
+#define DREG_REGID_RSD3_HIGH                    0x00000218
+#define DREG_REGID_SRAR_HIGH                    0x0000021A
+#define DREG_REGID_SRAR_LOW                     0x0000021B
+#define DREG_REGID_DMA_STATE                    0x0000021C
+#define DREG_REGID_CURRENT_DMA_STREAM           0x0000021D
+#define DREG_REGID_NEXT_DMA_STREAM              0x0000021E
+#define DREG_REGID_CPU_STATUS                   0x00000300
+#define DREG_REGID_MAC_MODE                     0x00000301
+#define DREG_REGID_STACK_AND_REPEAT             0x00000302
+#define DREG_REGID_INDEX0                       0x00000304
+#define DREG_REGID_INDEX1                       0x00000305
+#define DREG_REGID_DMA_STATE_0_3                0x00000400
+#define DREG_REGID_DMA_STATE_4_7                0x00000404
+#define DREG_REGID_DMA_STATE_8_11               0x00000408
+#define DREG_REGID_DMA_STATE_12_15              0x0000040C
+#define DREG_REGID_DMA_STATE_16_19              0x00000410
+#define DREG_REGID_DMA_STATE_20_23              0x00000414
+#define DREG_REGID_DMA_STATE_24_27              0x00000418
+#define DREG_REGID_DMA_STATE_28_31              0x0000041C
+#define DREG_REGID_DMA_STATE_32_35              0x00000420
+#define DREG_REGID_DMA_STATE_36_39              0x00000424
+#define DREG_REGID_DMA_STATE_40_43              0x00000428
+#define DREG_REGID_DMA_STATE_44_47              0x0000042C
+#define DREG_REGID_DMA_STATE_48_51              0x00000430
+#define DREG_REGID_DMA_STATE_52_55              0x00000434
+#define DREG_REGID_DMA_STATE_56_59              0x00000438
+#define DREG_REGID_DMA_STATE_60_63              0x0000043C
+#define DREG_REGID_DMA_STATE_64_67              0x00000440
+#define DREG_REGID_DMA_STATE_68_71              0x00000444
+#define DREG_REGID_DMA_STATE_72_75              0x00000448
+#define DREG_REGID_DMA_STATE_76_79              0x0000044C
+#define DREG_REGID_DMA_STATE_80_83              0x00000450
+#define DREG_REGID_DMA_STATE_84_87              0x00000454
+#define DREG_REGID_DMA_STATE_88_91              0x00000458
+#define DREG_REGID_DMA_STATE_92_95              0x0000045C
+#define DREG_REGID_TRAP_SELECT                  0x00000500
+#define DREG_REGID_TRAP_WRITE_0                 0x00000500
+#define DREG_REGID_TRAP_WRITE_1                 0x00000501
+#define DREG_REGID_TRAP_WRITE_2                 0x00000502
+#define DREG_REGID_TRAP_WRITE_3                 0x00000503
+#define DREG_REGID_TRAP_WRITE_4                 0x00000504
+#define DREG_REGID_TRAP_WRITE_5                 0x00000505
+#define DREG_REGID_TRAP_WRITE_6                 0x00000506
+#define DREG_REGID_TRAP_WRITE_7                 0x00000507
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_WRITE_8                 0x00000510
+#define DREG_REGID_TRAP_WRITE_9                 0x00000511
+#define DREG_REGID_TRAP_WRITE_10                0x00000512
+#define DREG_REGID_TRAP_WRITE_11                0x00000513
+#define DREG_REGID_TRAP_WRITE_12                0x00000514
+#define DREG_REGID_TRAP_WRITE_13                0x00000515
+#define DREG_REGID_TRAP_WRITE_14                0x00000516
+#define DREG_REGID_TRAP_WRITE_15                0x00000517
+#define DREG_REGID_TRAP_WRITE_16                0x00000518
+#define DREG_REGID_TRAP_WRITE_17                0x00000519
+#define DREG_REGID_TRAP_WRITE_18                0x0000051A
+#define DREG_REGID_TRAP_WRITE_19                0x0000051B
+#define DREG_REGID_TRAP_WRITE_20                0x0000051C
+#define DREG_REGID_TRAP_WRITE_21                0x0000051D
+#define DREG_REGID_TRAP_WRITE_22                0x0000051E
+#define DREG_REGID_TRAP_WRITE_23                0x0000051F
+#endif
+#endif
+#define DREG_REGID_MAC0_ACC0_LOW                0x00000600
+#define DREG_REGID_MAC0_ACC1_LOW                0x00000601
+#define DREG_REGID_MAC0_ACC2_LOW                0x00000602
+#define DREG_REGID_MAC0_ACC3_LOW                0x00000603
+#define DREG_REGID_MAC1_ACC0_LOW                0x00000604
+#define DREG_REGID_MAC1_ACC1_LOW                0x00000605
+#define DREG_REGID_MAC1_ACC2_LOW                0x00000606
+#define DREG_REGID_MAC1_ACC3_LOW                0x00000607
+#define DREG_REGID_MAC0_ACC0_MID                0x00000608
+#define DREG_REGID_MAC0_ACC1_MID                0x00000609
+#define DREG_REGID_MAC0_ACC2_MID                0x0000060A
+#define DREG_REGID_MAC0_ACC3_MID                0x0000060B
+#define DREG_REGID_MAC1_ACC0_MID                0x0000060C
+#define DREG_REGID_MAC1_ACC1_MID                0x0000060D
+#define DREG_REGID_MAC1_ACC2_MID                0x0000060E
+#define DREG_REGID_MAC1_ACC3_MID                0x0000060F
+#define DREG_REGID_MAC0_ACC0_HIGH               0x00000610
+#define DREG_REGID_MAC0_ACC1_HIGH               0x00000611
+#define DREG_REGID_MAC0_ACC2_HIGH               0x00000612
+#define DREG_REGID_MAC0_ACC3_HIGH               0x00000613
+#define DREG_REGID_MAC1_ACC0_HIGH               0x00000614
+#define DREG_REGID_MAC1_ACC1_HIGH               0x00000615
+#define DREG_REGID_MAC1_ACC2_HIGH               0x00000616
+#define DREG_REGID_MAC1_ACC3_HIGH               0x00000617
+#define DREG_REGID_RSHOUT_LOW                   0x00000620
+#define DREG_REGID_RSHOUT_MID                   0x00000628
+#define DREG_REGID_RSHOUT_HIGH                  0x00000630
+
+/*
+ *  The following defines are for the flags in the DMA stream requestor write
+ */
+#define DSRWP_DSR_MASK                          0x0000000F
+#define DSRWP_DSR_BG_RQ                         0x00000001
+#define DSRWP_DSR_PRIORITY_MASK                 0x00000006
+#define DSRWP_DSR_PRIORITY_0                    0x00000000
+#define DSRWP_DSR_PRIORITY_1                    0x00000002
+#define DSRWP_DSR_PRIORITY_2                    0x00000004
+#define DSRWP_DSR_PRIORITY_3                    0x00000006
+#define DSRWP_DSR_RQ_PENDING                    0x00000008
+
+/*
+ *  The following defines are for the flags in the trap write port register.
+ */
+#define TWPR_TW_MASK                            0x0000FFFF
+#define TWPR_TW_SHIFT                           0
+
+/*
+ *  The following defines are for the flags in the stack pointer write
+ *  register.
+ */
+#define SPWR_STKP_MASK                          0x0000000F
+#define SPWR_STKP_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the SP interrupt register.
+ */
+#define SPIR_FRI                                0x00000001
+#define SPIR_DOI                                0x00000002
+#define SPIR_GPI2                               0x00000004
+#define SPIR_GPI3                               0x00000008
+#define SPIR_IP0                                0x00000010
+#define SPIR_IP1                                0x00000020
+#define SPIR_IP2                                0x00000040
+#define SPIR_IP3                                0x00000080
+
+/*
+ *  The following defines are for the flags in the functional group 1 register.
+ */
+#define FGR1_F1S_MASK                           0x0000FFFF
+#define FGR1_F1S_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the SP clock status register.
+ */
+#define SPCS_FRI                                0x00000001
+#define SPCS_DOI                                0x00000002
+#define SPCS_GPI2                               0x00000004
+#define SPCS_GPI3                               0x00000008
+#define SPCS_IP0                                0x00000010
+#define SPCS_IP1                                0x00000020
+#define SPCS_IP2                                0x00000040
+#define SPCS_IP3                                0x00000080
+#define SPCS_SPRUN                              0x00000100
+#define SPCS_SLEEP                              0x00000200
+#define SPCS_FG                                 0x00000400
+#define SPCS_ORUN                               0x00000800
+#define SPCS_IRQ                                0x00001000
+#define SPCS_FGN_MASK                           0x0000E000
+#define SPCS_FGN_SHIFT                          13
+
+/*
+ *  The following defines are for the flags in the SP DMA requestor status
+ *  register.
+ */
+#define SDSR_DCS_MASK                           0x000000FF
+#define SDSR_DCS_SHIFT                          0
+#define SDSR_DCS_NONE                           0x00000007
+
+/*
+ *  The following defines are for the flags in the frame timer register.
+ */
+#define FRMT_FTV_MASK                           0x0000FFFF
+#define FRMT_FTV_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the frame timer current count
+ *  register.
+ */
+#define FRCC_FCC_MASK                           0x0000FFFF
+#define FRCC_FCC_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the frame timer save count
+ *  register.
+ */
+#define FRSC_FCS_MASK                           0x0000FFFF
+#define FRSC_FCS_SHIFT                          0
+
+/*
+ *  The following define the various flags stored in the scatter/gather
+ *  descriptors.
+ */
+#define DMA_SG_NEXT_ENTRY_MASK                  0x00000FF8
+#define DMA_SG_SAMPLE_END_MASK                  0x0FFF0000
+#define DMA_SG_SAMPLE_END_FLAG                  0x10000000
+#define DMA_SG_LOOP_END_FLAG                    0x20000000
+#define DMA_SG_SIGNAL_END_FLAG                  0x40000000
+#define DMA_SG_SIGNAL_PAGE_FLAG                 0x80000000
+#define DMA_SG_NEXT_ENTRY_SHIFT                 3
+#define DMA_SG_SAMPLE_END_SHIFT                 16
+
+/*
+ *  The following define the offsets of the fields within the on-chip generic
+ *  DMA requestor.
+ */
+#define DMA_RQ_CONTROL1                         0x00000000
+#define DMA_RQ_CONTROL2                         0x00000004
+#define DMA_RQ_SOURCE_ADDR                      0x00000008
+#define DMA_RQ_DESTINATION_ADDR                 0x0000000C
+#define DMA_RQ_NEXT_PAGE_ADDR                   0x00000010
+#define DMA_RQ_NEXT_PAGE_SGDESC                 0x00000014
+#define DMA_RQ_LOOP_START_ADDR                  0x00000018
+#define DMA_RQ_POST_LOOP_ADDR                   0x0000001C
+#define DMA_RQ_PAGE_MAP_ADDR                    0x00000020
+
+/*
+ *  The following defines are for the flags in the first control word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C1_COUNT_MASK                    0x000003FF
+#define DMA_RQ_C1_DESTINATION_SCATTER           0x00001000
+#define DMA_RQ_C1_SOURCE_GATHER                 0x00002000
+#define DMA_RQ_C1_DONE_FLAG                     0x00004000
+#define DMA_RQ_C1_OPTIMIZE_STATE                0x00008000
+#define DMA_RQ_C1_SAMPLE_END_STATE_MASK         0x00030000
+#define DMA_RQ_C1_FULL_PAGE                     0x00000000
+#define DMA_RQ_C1_BEFORE_SAMPLE_END             0x00010000
+#define DMA_RQ_C1_PAGE_MAP_ERROR                0x00020000
+#define DMA_RQ_C1_AT_SAMPLE_END                 0x00030000
+#define DMA_RQ_C1_LOOP_END_STATE_MASK           0x000C0000
+#define DMA_RQ_C1_NOT_LOOP_END                  0x00000000
+#define DMA_RQ_C1_BEFORE_LOOP_END               0x00040000
+#define DMA_RQ_C1_2PAGE_LOOP_BEGIN              0x00080000
+#define DMA_RQ_C1_LOOP_BEGIN                    0x000C0000
+#define DMA_RQ_C1_PAGE_MAP_MASK                 0x00300000
+#define DMA_RQ_C1_PM_NONE_PENDING               0x00000000
+#define DMA_RQ_C1_PM_NEXT_PENDING               0x00100000
+#define DMA_RQ_C1_PM_RESERVED                   0x00200000
+#define DMA_RQ_C1_PM_LOOP_NEXT_PENDING          0x00300000
+#define DMA_RQ_C1_WRITEBACK_DEST_FLAG           0x00400000
+#define DMA_RQ_C1_WRITEBACK_SRC_FLAG            0x00800000
+#define DMA_RQ_C1_DEST_SIZE_MASK                0x07000000
+#define DMA_RQ_C1_DEST_LINEAR                   0x00000000
+#define DMA_RQ_C1_DEST_MOD16                    0x01000000
+#define DMA_RQ_C1_DEST_MOD32                    0x02000000
+#define DMA_RQ_C1_DEST_MOD64                    0x03000000
+#define DMA_RQ_C1_DEST_MOD128                   0x04000000
+#define DMA_RQ_C1_DEST_MOD256                   0x05000000
+#define DMA_RQ_C1_DEST_MOD512                   0x06000000
+#define DMA_RQ_C1_DEST_MOD1024                  0x07000000
+#define DMA_RQ_C1_DEST_ON_HOST                  0x08000000
+#define DMA_RQ_C1_SOURCE_SIZE_MASK              0x70000000
+#define DMA_RQ_C1_SOURCE_LINEAR                 0x00000000
+#define DMA_RQ_C1_SOURCE_MOD16                  0x10000000
+#define DMA_RQ_C1_SOURCE_MOD32                  0x20000000
+#define DMA_RQ_C1_SOURCE_MOD64                  0x30000000
+#define DMA_RQ_C1_SOURCE_MOD128                 0x40000000
+#define DMA_RQ_C1_SOURCE_MOD256                 0x50000000
+#define DMA_RQ_C1_SOURCE_MOD512                 0x60000000
+#define DMA_RQ_C1_SOURCE_MOD1024                0x70000000
+#define DMA_RQ_C1_SOURCE_ON_HOST                0x80000000
+#define DMA_RQ_C1_COUNT_SHIFT                   0
+
+/*
+ *  The following defines are for the flags in the second control word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_MASK          0x0000003F
+#define DMA_RQ_C2_VIRTUAL_SIGNAL_MASK           0x00000300
+#define DMA_RQ_C2_NO_VIRTUAL_SIGNAL             0x00000000
+#define DMA_RQ_C2_SIGNAL_EVERY_DMA              0x00000100
+#define DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG        0x00000200
+#define DMA_RQ_C2_SIGNAL_DEST_PINGPONG          0x00000300
+#define DMA_RQ_C2_AUDIO_CONVERT_MASK            0x0000F000
+#define DMA_RQ_C2_AC_NONE                       0x00000000
+#define DMA_RQ_C2_AC_8_TO_16_BIT                0x00001000
+#define DMA_RQ_C2_AC_MONO_TO_STEREO             0x00002000
+#define DMA_RQ_C2_AC_ENDIAN_CONVERT             0x00004000
+#define DMA_RQ_C2_AC_SIGNED_CONVERT             0x00008000
+#define DMA_RQ_C2_LOOP_END_MASK                 0x0FFF0000
+#define DMA_RQ_C2_LOOP_MASK                     0x30000000
+#define DMA_RQ_C2_NO_LOOP                       0x00000000
+#define DMA_RQ_C2_ONE_PAGE_LOOP                 0x10000000
+#define DMA_RQ_C2_TWO_PAGE_LOOP                 0x20000000
+#define DMA_RQ_C2_MULTI_PAGE_LOOP               0x30000000
+#define DMA_RQ_C2_SIGNAL_LOOP_BACK              0x40000000
+#define DMA_RQ_C2_SIGNAL_POST_BEGIN_PAGE        0x80000000
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_SHIFT         0
+#define DMA_RQ_C2_LOOP_END_SHIFT                16
+
+/*
+ *  The following defines are for the flags in the source and destination words
+ *  of the on-chip generic DMA requestor.
+ */
+#define DMA_RQ_SD_ADDRESS_MASK                  0x0000FFFF
+#define DMA_RQ_SD_MEMORY_ID_MASK                0x000F0000
+#define DMA_RQ_SD_SP_PARAM_ADDR                 0x00000000
+#define DMA_RQ_SD_SP_SAMPLE_ADDR                0x00010000
+#define DMA_RQ_SD_SP_PROGRAM_ADDR               0x00020000
+#define DMA_RQ_SD_SP_DEBUG_ADDR                 0x00030000
+#define DMA_RQ_SD_OMNIMEM_ADDR                  0x000E0000
+#define DMA_RQ_SD_END_FLAG                      0x40000000
+#define DMA_RQ_SD_ERROR_FLAG                    0x80000000
+#define DMA_RQ_SD_ADDRESS_SHIFT                 0
+
+/*
+ *  The following defines are for the flags in the page map address word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_MASK   0x00000FF8
+#define DMA_RQ_PMA_PAGE_TABLE_MASK              0xFFFFF000
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_SHIFT  3
+#define DMA_RQ_PMA_PAGE_TABLE_SHIFT             12
+
+#define BA1_VARIDEC_BUF_1       0x000
+
+#define BA1_PDTC                0x0c0    /* BA1_PLAY_DMA_TRANSACTION_COUNT_REG */
+#define BA1_PFIE                0x0c4    /* BA1_PLAY_FORMAT_&_INTERRUPT_ENABLE_REG */
+#define BA1_PBA                 0x0c8    /* BA1_PLAY_BUFFER_ADDRESS */
+#define BA1_PVOL                0x0f8    /* BA1_PLAY_VOLUME_REG */
+#define BA1_PSRC                0x288    /* BA1_PLAY_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_PCTL                0x2a4    /* BA1_PLAY_CONTROL_REG */
+#define BA1_PPI                 0x2b4    /* BA1_PLAY_PHASE_INCREMENT_REG */
+
+#define BA1_CCTL                0x064    /* BA1_CAPTURE_CONTROL_REG */
+#define BA1_CIE                 0x104    /* BA1_CAPTURE_INTERRUPT_ENABLE_REG */
+#define BA1_CBA                 0x10c    /* BA1_CAPTURE_BUFFER_ADDRESS */
+#define BA1_CSRC                0x2c8    /* BA1_CAPTURE_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_CCI                 0x2d8    /* BA1_CAPTURE_COEFFICIENT_INCREMENT_REG */
+#define BA1_CD                  0x2e0    /* BA1_CAPTURE_DELAY_REG */
+#define BA1_CPI                 0x2f4    /* BA1_CAPTURE_PHASE_INCREMENT_REG */
+#define BA1_CVOL                0x2f8    /* BA1_CAPTURE_VOLUME_REG */
+
+#define BA1_CFG1                0x134    /* BA1_CAPTURE_FRAME_GROUP_1_REG */
+#define BA1_CFG2                0x138    /* BA1_CAPTURE_FRAME_GROUP_2_REG */
+#define BA1_CCST                0x13c    /* BA1_CAPTURE_CONSTANT_REG */
+#define BA1_CSPB                0x340    /* BA1_CAPTURE_SPB_ADDRESS */
+
+/*
+ *
+ */
+
+#define CS46XX_MODE_OUTPUT	(1<<0)	 /* MIDI UART - output */ 
+#define CS46XX_MODE_INPUT	(1<<1)	 /* MIDI UART - input */
+
+/*
+ *
+ */
+
+#define SAVE_REG_MAX             0x10
+#define POWER_DOWN_ALL         0x7f0f
+
+/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
+#define MAX_NR_AC97				            4
+#define CS46XX_PRIMARY_CODEC_INDEX          0
+#define CS46XX_SECONDARY_CODEC_INDEX		1
+#define CS46XX_SECONDARY_CODEC_OFFSET		0x80
+#define CS46XX_DSP_CAPTURE_CHANNEL          1
+
+/* capture */
+#define CS46XX_DSP_CAPTURE_CHANNEL          1
+
+/* mixer */
+#define CS46XX_MIXER_SPDIF_INPUT_ELEMENT    1
+#define CS46XX_MIXER_SPDIF_OUTPUT_ELEMENT   2
+
+typedef struct _snd_cs46xx cs46xx_t;
+
+typedef struct _snd_cs46xx_pcm_t {
+	struct snd_dma_buffer hw_buf;
+  
+	unsigned int ctl;
+	unsigned int shift;	/* Shift count to trasform frames in bytes */
+	snd_pcm_indirect_t pcm_rec;
+	snd_pcm_substream_t *substream;
+
+	pcm_channel_descriptor_t * pcm_channel;
+
+	int pcm_channel_id;    /* Fron Rear, Center Lfe  ... */
+} cs46xx_pcm_t;
+
+typedef struct {
+	char name[24];
+	unsigned long base;
+	void __iomem *remap_addr;
+	unsigned long size;
+	struct resource *resource;
+} snd_cs46xx_region_t;
+
+struct _snd_cs46xx {
+	int irq;
+	unsigned long ba0_addr;
+	unsigned long ba1_addr;
+	union {
+		struct {
+			snd_cs46xx_region_t ba0;
+			snd_cs46xx_region_t data0;
+			snd_cs46xx_region_t data1;
+			snd_cs46xx_region_t pmem;
+			snd_cs46xx_region_t reg;
+		} name;
+		snd_cs46xx_region_t idx[5];
+	} region;
+
+	unsigned int mode;
+	
+	struct {
+		struct snd_dma_buffer hw_buf;
+
+		unsigned int ctl;
+		unsigned int shift;	/* Shift count to trasform frames in bytes */
+		snd_pcm_indirect_t pcm_rec;
+		snd_pcm_substream_t *substream;
+	} capt;
+
+
+	int nr_ac97_codecs;
+	ac97_bus_t *ac97_bus;
+	ac97_t *ac97[MAX_NR_AC97];
+
+	struct pci_dev *pci;
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+
+	snd_rawmidi_t *rmidi;
+	snd_rawmidi_substream_t *midi_input;
+	snd_rawmidi_substream_t *midi_output;
+
+	spinlock_t reg_lock;
+	unsigned int midcr;
+	unsigned int uartm;
+
+	int amplifier;
+	void (*amplifier_ctrl)(cs46xx_t *, int);
+	void (*active_ctrl)(cs46xx_t *, int);
+  	void (*mixer_init)(cs46xx_t *);
+
+	struct pci_dev *acpi_dev;
+	int acpi_port;
+	snd_kcontrol_t *eapd_switch; /* for amplifier hack */
+	int accept_valid;	/* accept mmap valid (for OSS) */
+
+	struct gameport *gameport;
+
+#ifdef CONFIG_SND_CS46XX_DEBUG_GPIO
+	int current_gpio;
+#endif
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+	struct semaphore spos_mutex;
+
+	dsp_spos_instance_t * dsp_spos_instance;
+
+	snd_pcm_t *pcm_rear;
+	snd_pcm_t *pcm_center_lfe;
+	snd_pcm_t *pcm_iec958;
+#else /* for compatibility */
+	cs46xx_pcm_t *playback_pcm;
+	unsigned int play_ctl;
+#endif
+};
+
+int snd_cs46xx_create(snd_card_t *card,
+		      struct pci_dev *pci,
+		      int external_amp, int thinkpad,
+		      cs46xx_t **rcodec);
+
+int snd_cs46xx_pcm(cs46xx_t *chip, int device, snd_pcm_t **rpcm);
+int snd_cs46xx_pcm_rear(cs46xx_t *chip, int device, snd_pcm_t **rpcm);
+int snd_cs46xx_pcm_iec958(cs46xx_t *chip, int device, snd_pcm_t **rpcm);
+int snd_cs46xx_pcm_center_lfe(cs46xx_t *chip, int device, snd_pcm_t **rpcm);
+int snd_cs46xx_mixer(cs46xx_t *chip);
+int snd_cs46xx_midi(cs46xx_t *chip, int device, snd_rawmidi_t **rmidi);
+int snd_cs46xx_start_dsp(cs46xx_t *chip);
+int snd_cs46xx_gameport(cs46xx_t *chip);
+
+#endif /* __SOUND_CS46XX_H */
diff --git a/include/sound/cs46xx_dsp_scb_types.h b/include/sound/cs46xx_dsp_scb_types.h
new file mode 100644
index 000000000000..3f990a3a6903
--- /dev/null
+++ b/include/sound/cs46xx_dsp_scb_types.h
@@ -0,0 +1,1216 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst 
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP) 
+ */
+
+#ifndef __CS46XX_DSP_SCB_TYPES_H__
+#define __CS46XX_DSP_SCB_TYPES_H__
+
+#include <asm/byteorder.h>
+
+#ifndef ___DSP_DUAL_16BIT_ALLOC
+#if   defined(__LITTLE_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 a; u16 b;
+#elif defined(__BIG_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 b; u16 a;
+#else
+#error Not __LITTLE_ENDIAN and not __BIG_ENDIAN, then what ???
+#endif
+#endif
+
+/* This structs are used internally by the SP */
+
+typedef struct _basic_dma_req_t {
+	/* DMA Requestor Word 0 (DCW)  fields:
+
+	   31 [30-28]27  [26:24] 23 22 21 20 [19:18] [17:16] 15 14 13  12  11 10 9 8 7 6  [5:0]
+	   _______________________________________________________________________________________	
+	   |S| SBT  |D|  DBT    |wb|wb|  |  |  LS  |  SS   |Opt|Do|SSG|DSG|  |  | | | | | Dword   |
+	   |H|_____ |H|_________|S_|D |__|__|______|_______|___|ne|__ |__ |__|__|_|_|_|_|_Count -1|
+	*/
+	u32 dcw;                 /* DMA Control Word */
+	u32 dmw;                 /* DMA Mode Word */
+	u32 saw;                 /* Source Address Word */
+	u32 daw;                 /* Destination Address Word  */
+} basic_dma_req_t;
+
+typedef struct _scatter_gather_ext_t {
+	u32 npaw;                /* Next-Page Address Word */
+
+	/* DMA Requestor Word 5 (NPCW)  fields:
+     
+	   31-30 29 28          [27:16]              [15:12]             [11:3]                [2:0] 				
+	   _________________________________________________________________________________________	
+	   |SV  |LE|SE|   Sample-end byte offset   |         | Page-map entry offset for next  |    | 
+	   |page|__|__| ___________________________|_________|__page, if !sample-end___________|____|
+	*/
+	u32 npcw;                /* Next-Page Control Word */
+	u32 lbaw;                /* Loop-Begin Address Word */
+	u32 nplbaw;              /* Next-Page after Loop-Begin Address Word */
+	u32 sgaw;                /* Scatter/Gather Address Word */
+} scatter_gather_ext_t;
+
+typedef struct _volume_control_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	   rightTarg,  /* Target volume for left & right channels */
+	   leftTarg
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	   rightVol,   /* Current left & right channel volumes */
+	   leftVol
+	)
+} volume_control_t;
+
+/* Generic stream control block (SCB) structure definition */
+typedef struct _generic_scb_t {
+	/* For streaming I/O, the DSP should never alter any words in the DMA
+	   requestor or the scatter/gather extension.  Only ad hoc DMA request
+	   streams are free to alter the requestor (currently only occur in the
+	   DOS-based MIDI controller and in debugger-inserted code).
+    
+	   If an SCB does not have any associated DMA requestor, these 9 ints
+	   may be freed for use by other tasks, but the pointer to the SCB must
+	   still be such that the insOrd:nextSCB appear at offset 9 from the
+	   SCB pointer.
+     
+	   Basic (non scatter/gather) DMA requestor (4 ints)
+	*/
+  
+	/* Initialized by the host, only modified by DMA 
+	   R/O for the DSP task */
+	basic_dma_req_t  basic_req;  /* Optional */
+
+	/* Scatter/gather DMA requestor extension   (5 ints) 
+	   Initialized by the host, only modified by DMA
+	   DSP task never needs to even read these.
+	*/
+	scatter_gather_ext_t sg_ext;  /* Optional */
+
+	/* Sublist pointer & next stream control block (SCB) link.
+	   Initialized & modified by the host R/O for the DSP task
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,     /* REQUIRED */
+	    sub_list_ptr  /* REQUIRED */
+	)
+  
+	/* Pointer to this tasks parameter block & stream function pointer 
+	   Initialized by the host  R/O for the DSP task */
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,  /* REQUIRED */
+	    this_spb      /* REQUIRED */
+	)
+
+	/* rsConfig register for stream buffer (rsDMA reg. 
+	   is loaded from basicReq.daw for incoming streams, or 
+	   basicReq.saw, for outgoing streams) 
+
+	   31 30 29  [28:24]     [23:16] 15 14 13 12 11 10 9 8 7 6  5      4      [3:0]
+	   ______________________________________________________________________________
+	   |DMA  |D|maxDMAsize| streamNum|dir|p|  |  |  |  | | |ds |shr 1|rev Cy | mod   |
+	   |prio |_|__________|__________|___|_|__|__|__|__|_|_|___|_____|_______|_______|
+	   31 30 29  [28:24]     [23:16] 15 14 13 12 11 10 9 8 7 6  5      4      [3:0]
+
+
+	   Initialized by the host R/O for the DSP task
+	*/
+	u32  strm_rs_config; /* REQUIRED */
+               // 
+	/* On mixer input streams: indicates mixer input stream configuration
+	   On Tees, this is copied from the stream being snooped
+
+	   Stream sample pointer & MAC-unit mode for this stream 
+     
+	   Initialized by the host Updated by the DSP task
+	*/
+	u32  strm_buf_ptr; /* REQUIRED  */
+
+	/* On mixer input streams: points to next mixer input and is updated by the
+                                   mixer subroutine in the "parent" DSP task
+				   (least-significant 16 bits are preserved, unused)
+    
+           On Tees, the pointer is copied from the stream being snooped on
+	   initialization, and, subsequently, it is copied into the
+	   stream being snooped.
+
+	   On wavetable/3D voices: the strmBufPtr will use all 32 bits to allow for
+                                   fractional phase accumulation
+
+	   Fractional increment per output sample in the input sample buffer
+
+	   (Not used on mixer input streams & redefined on Tees)
+	   On wavetable/3D voices: this 32-bit word specifies the integer.fractional 
+	   increment per output sample.
+	*/
+	u32  strmPhiIncr;
+
+
+	/* Standard stereo volume control
+	   Initialized by the host (host updates target volumes) 
+
+	   Current volumes update by the DSP task
+	   On mixer input streams: required & updated by the mixer subroutine in the
+                                   "parent" DSP task
+
+	   On Tees, both current & target volumes are copied up on initialization,
+	   and, subsequently, the target volume is copied up while the current
+	   volume is copied down.
+     
+	   These two 32-bit words are redefined for wavetable & 3-D voices.    
+	*/
+	volume_control_t vol_ctrl_t;   /* Optional */
+} generic_scb_t;
+
+
+typedef struct _spos_control_block_t {
+	/* WARNING: Certain items in this structure are modified by the host
+	            Any dword that can be modified by the host, must not be
+		    modified by the SP as the host can only do atomic dword
+		    writes, and to do otherwise, even a read modify write, 
+		    may lead to corrupted data on the SP.
+  
+		    This rule does not apply to one off boot time initialisation prior to starting the SP
+	*/
+
+
+	___DSP_DUAL_16BIT_ALLOC( 
+	/* First element on the Hyper forground task tree */
+	    hfg_tree_root_ptr,  /* HOST */			    
+	/* First 3 dwords are written by the host and read-only on the DSP */
+	    hfg_stack_base      /* HOST */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Point to this data structure to enable easy access */
+	    spos_cb_ptr,	 /* SP */
+	    prev_task_tree_ptr   /* SP && HOST */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Currently Unused */
+	    xxinterval_timer_period,
+	/* Enable extension of SPOS data structure */
+	    HFGSPB_ptr
+	)
+
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    xxnum_HFG_ticks_thisInterval,
+	/* Modified by the DSP */
+	    xxnum_tntervals
+	)
+
+
+	/* Set by DSP upon encountering a trap (breakpoint) or a spurious
+	   interrupt.  The host must clear this dword after reading it
+	   upon receiving spInt1. */
+	___DSP_DUAL_16BIT_ALLOC(
+	    spurious_int_flag,	 /* (Host & SP) Nature of the spurious interrupt */
+	    trap_flag            /* (Host & SP) Nature of detected Trap */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused2,					
+	    invalid_IP_flag        /* (Host & SP ) Indicate detection of invalid instruction pointer */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* pointer to forground task tree header for use in next task search */
+	    fg_task_tree_hdr_ptr,	  /* HOST */		
+	/* Data structure for controlling synchronous link update */
+	    hfg_sync_update_ptr           /* HOST */
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	     begin_foreground_FCNT,  /* SP */
+	/* Place holder for holding sleep timing */
+	     last_FCNT_before_sleep  /* SP */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused7,           /* SP */
+	    next_task_treePtr  /* SP */
+	)
+
+	u32 unused5;        
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    active_flags,   /* SP */
+	/* State flags, used to assist control of execution of Hyper Forground */
+	    HFG_flags       /* SP */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused9,
+	    unused8
+	)
+                              
+	/* Space for saving enough context so that we can set up enough 
+	   to save some more context.
+	*/
+	u32 rFE_save_for_invalid_IP;
+	u32 r32_save_for_spurious_int;
+	u32 r32_save_for_trap;
+	u32 r32_save_for_HFG;
+} spos_control_block_t;
+
+/* SPB for MIX_TO_OSTREAM algorithm family */
+typedef struct _mix2_ostream_spb_t
+{
+	/* 16b.16b integer.frac approximation to the
+	   number of 3 sample triplets to output each
+	   frame. (approximation must be floor, to
+	   insure that the fractional error is always
+	   positive)
+	*/
+	u32 outTripletsPerFrame;
+
+	/* 16b.16b integer.frac accumulated number of
+	   output triplets since the start of group 
+	*/
+	u32 accumOutTriplets;  
+} mix2_ostream_spb_t;
+
+/* SCB for Timing master algorithm */
+typedef struct _timing_master_scb_t {
+	/* First 12 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,     /* REQUIRED */
+	    sub_list_ptr  /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,  /* REQUIRED */
+	    this_spb      /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Initial values are 0000:xxxx */
+ 	    reserved,
+	    extra_sample_accum
+	)
+
+  
+	/* Initial values are xxxx:0000
+	   hi: Current CODEC output FIFO pointer
+	       (0 to 0x0f)
+           lo: Flag indicating that the CODEC
+	       FIFO is sync'd (host clears to
+	       resynchronize the FIFO pointer
+	       upon start/restart) 
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    codec_FIFO_syncd, 
+	    codec_FIFO_ptr
+	)
+  
+	/* Init. 8000:0005 for 44.1k
+                 8000:0001 for 48k
+	   hi: Fractional sample accumulator 0.16b
+	   lo: Number of frames remaining to be
+	       processed in the current group of
+	       frames
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frac_samp_accum_qm1,
+	    TM_frms_left_in_group
+	) 
+
+	/* Init. 0001:0005 for 44.1k
+                 0000:0001 for 48k
+	   hi: Fractional sample correction factor 0.16b
+	       to be added every frameGroupLength frames
+	       to correct for truncation error in
+	       nsamp_per_frm_q15
+	   lo: Number of frames in the group
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frac_samp_correction_qm1,
+	    TM_frm_group_length  
+	)
+
+	/* Init. 44.1k*65536/8k = 0x00058333 for 44.1k
+                 48k*65536/8k = 0x00060000 for 48k
+	   16b.16b integer.frac approximation to the
+	   number of samples to output each frame.
+	   (approximation must be floor, to insure */
+	u32 nsamp_per_frm_q15;
+} timing_master_scb_t;
+
+/* SCB for CODEC output algorithm */
+typedef struct _codec_output_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	/* NOTE: The CODEC output task reads samples from the first task on its
+                 sublist at the stream buffer pointer (init. to lag DMA destination
+		 address word).  After the required number of samples is transferred,
+		 the CODEC output task advances sub_list_ptr->strm_buf_ptr past the samples
+		 consumed.
+	*/
+
+	/* Init. 0000:0010 for SDout
+                 0060:0010 for SDout2
+		 0080:0010 for SDout3
+	   hi: Base IO address of FIFO to which
+	       the left-channel samples are to
+	       be written.
+	   lo: Displacement for the base IO
+	       address for left-channel to obtain
+	       the base IO address for the FIFO
+	       to which the right-channel samples
+	       are to be written.
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    left_chan_base_IO_addr,
+	    right_chan_IO_disp
+	)
+
+
+	/* Init: 0x0080:0004 for non-AC-97
+	   Init: 0x0080:0000 for AC-97
+	   hi: Exponential volume change rate
+	       for input stream
+	   lo: Positive shift count to shift the
+	       16-bit input sample to obtain the
+	       32-bit output word
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    CO_scale_shift_count, 
+	    CO_exp_vol_change_rate
+	)
+
+	/* Pointer to SCB at end of input chain */
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved,
+	    last_sub_ptr
+	)
+} codec_output_scb_t;
+
+/* SCB for CODEC input algorithm */
+typedef struct _codec_input_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	/* NOTE: The CODEC input task reads samples from the hardware FIFO 
+                 sublist at the DMA source address word (sub_list_ptr->basic_req.saw).
+                 After the required number of samples is transferred, the CODEC
+                 output task advances sub_list_ptr->basic_req.saw past the samples
+                 consumed.  SPuD must initialize the sub_list_ptr->basic_req.saw
+                 to point half-way around from the initial sub_list_ptr->strm_nuf_ptr
+                 to allow for lag/lead.
+	*/
+
+	/* Init. 0000:0010 for SDout
+                 0060:0010 for SDout2
+		 0080:0010 for SDout3
+	   hi: Base IO address of FIFO to which
+	       the left-channel samples are to
+	       be written.
+	   lo: Displacement for the base IO
+	       address for left-channel to obtain
+	       the base IO address for the FIFO
+	       to which the right-channel samples
+	       are to be written.
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    rightChanINdisp, 
+	    left_chan_base_IN_addr
+	)
+	/* Init. ?:fffc
+	   lo: Negative shift count to shift the
+	       32-bit input dword to obtain the
+	       16-bit sample msb-aligned (count
+	       is negative to shift left)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    scaleShiftCount, 
+	    reserver1
+	)
+
+	u32  reserved2;
+} codec_input_scb_t;
+
+
+typedef struct _pcm_serial_input_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_buf_ptr;   /* REQUIRED */
+	u32 strm_rs_config; /* REQUIRED */
+  
+	/* Init. Ptr to CODEC input SCB
+	   hi: Pointer to the SCB containing the
+	       input buffer to which CODEC input
+	       samples are written
+	   lo: Flag indicating the link to the CODEC
+	       input task is to be initialized
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    init_codec_input_link,
+	    codec_input_buf_scb
+	)
+
+	/* Initialized by the host (host updates target volumes) */
+	volume_control_t psi_vol_ctrl;   
+  
+} pcm_serial_input_scb_t;
+
+typedef struct _src_task_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    frames_left_in_gof,
+	    gofs_left_in_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    const2_thirds,
+	    num_extra_tnput_samples
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    cor_per_gof,
+	    correction_per_sec 
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    output_buf_producer_ptr,  
+	    junk_DMA_MID
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    gof_length,  
+	    gofs_per_sec
+	)
+
+	u32 input_buf_strm_config;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved_for_SRC_use,
+	    input_buf_consumer_ptr
+	)
+
+	u32 accum_phi;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    exp_src_vol_change_rate,
+	    input_buf_producer_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    src_next_scb,
+	    src_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    src_entry_point,
+	    src_this_sbp
+	)
+
+	u32  src_strm_rs_config;
+	u32  src_strm_buf_ptr;
+  
+	u32   phiIncr6int_26frac;
+  
+	volume_control_t src_vol_ctrl;
+} src_task_scb_t;
+
+typedef struct _decimate_by_pow2_scb_t {
+	/* decimationFactor = 2, 4, or 8 (larger factors waste too much memory
+	                                  when compared to cascading decimators)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_coef_base_ptr,
+	    dec2_coef_increment
+	)
+
+	/* coefIncrement = 128 / decimationFactor (for our ROM filter)
+	   coefBasePtr = 0x8000 (for our ROM filter)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_in_samples_per_out_triplet,
+	    dec2_extra_in_samples
+	)
+	/* extraInSamples: # of accumulated, unused input samples (init. to 0)
+	   inSamplesPerOutTriplet = 3 * decimationFactor
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_const2_thirds,
+	    dec2_half_num_taps_mp5
+	)
+	/* halfNumTapsM5: (1/2 number of taps in decimation filter) minus 5
+	   const2thirds: constant 2/3 in 16Q0 format (sign.15)
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_output_buf_producer_ptr,
+	    dec2_junkdma_mid
+	)
+
+	u32  dec2_reserved2;
+
+	u32  dec2_input_nuf_strm_config;
+	/* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+	   (buffer size = decimationFactor * 32 dwords)
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_phi_incr,
+	    dec2_input_buf_consumer_ptr
+	)
+	/* inputBufConsumerPtr: Input buffer read pointer (into SRC filter)
+	   phiIncr = decimationFactor * 4
+	*/
+
+	u32 dec2_reserved3;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_exp_vol_change_rate,
+	    dec2_input_buf_producer_ptr
+	)
+	/* inputBufProducerPtr: Input buffer write pointer
+	   expVolChangeRate: Exponential volume change rate for possible
+	                     future mixer on input streams
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_next_scb,
+	    dec2_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_entry_point,
+	    dec2_this_spb
+	)
+
+	u32  dec2_strm_rs_config;
+	u32  dec2_strm_buf_ptr;
+
+	u32  dec2_reserved4;
+
+	volume_control_t dec2_vol_ctrl; /* Not used! */
+} decimate_by_pow2_scb_t;
+
+typedef struct _vari_decimate_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_frames_left_in_gof,
+	    vdec_gofs_left_in_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_const2_thirds,
+	    vdec_extra_in_samples
+	)
+	/* extraInSamples: # of accumulated, unused input samples (init. to 0)
+	   const2thirds: constant 2/3 in 16Q0 format (sign.15) */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_cor_per_gof,
+	    vdec_correction_per_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_output_buf_producer_ptr,
+	    vdec_input_buf_consumer_ptr
+	)
+	/* inputBufConsumerPtr: Input buffer read pointer (into SRC filter) */
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_gof_length,
+	    vdec_gofs_per_sec
+	)
+
+	u32  vdec_input_buf_strm_config;
+	/* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+	   (buffer size = 64 dwords) */
+	u32  vdec_coef_increment;
+	/* coefIncrement = - 128.0 / decimationFactor (as a 32Q15 number) */
+
+	u32  vdec_accumphi;
+	/* accumPhi: accumulated fractional phase increment (6.26) */
+
+	___DSP_DUAL_16BIT_ALLOC(
+ 	    vdec_exp_vol_change_rate,
+	    vdec_input_buf_producer_ptr
+	)
+	/* inputBufProducerPtr: Input buffer write pointer
+	   expVolChangeRate: Exponential volume change rate for possible
+	   future mixer on input streams */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_next_scb,
+	    vdec_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_entry_point,
+	    vdec_this_spb
+	)
+
+	u32 vdec_strm_rs_config;
+	u32 vdec_strm_buf_ptr;
+
+	u32 vdec_phi_incr_6int_26frac;
+
+	volume_control_t vdec_vol_ctrl;
+} vari_decimate_scb_t;
+
+
+/* SCB for MIX_TO_OSTREAM algorithm family */
+typedef struct _mix2_ostream_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+
+	/* hi: Number of mixed-down input triplets
+	       computed since start of group
+	   lo: Number of frames remaining to be
+	       processed in the current group of
+	       frames
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frames_left_in_group,
+	    accum_input_triplets
+	)
+
+	/* hi: Exponential volume change rate
+	       for mixer on input streams
+	   lo: Number of frames in the group
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frame_group_length,
+	    exp_vol_change_rate
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    const_FFFF,
+	    const_zero
+	)
+} mix2_ostream_scb_t;
+
+
+/* SCB for S16_MIX algorithm */
+typedef struct _mix_only_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	u32 reserved;
+	volume_control_t vol_ctrl;
+} mix_only_scb_t;
+
+/* SCB for the async. CODEC input algorithm */
+typedef struct _async_codec_input_scb_t {		 
+	u32 io_free2;     
+  
+	u32 io_current_total;
+	u32 io_previous_total;
+  
+	u16 io_count;
+	u16 io_count_limit;
+  
+	u16 o_fifo_base_addr;            
+	u16 ost_mo_format;
+	/* 1 = stereo; 0 = mono 
+	   xxx for ASER 1 (not allowed); 118 for ASER2 */
+
+	u32  ostrm_rs_config;
+	u32  ostrm_buf_ptr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_sclks_per_lr_clk,
+	    io_io_enable
+	)
+
+	u32  io_free4;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    io_next_scb,
+	    io_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_entry_point,
+	    io_this_spb
+	)
+
+	u32 istrm_rs_config;
+	u32 istrm_buf_ptr;
+
+	/* Init. 0000:8042: for ASER1
+                 0000:8044: for ASER2  */
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_stat_reg_addr,
+	    iofifo_pointer
+	)
+
+	/* Init 1 stero:100 ASER1
+	   Init 0 mono:110 ASER2 
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    ififo_base_addr,            
+	    ist_mo_format
+	)
+
+	u32 i_free;
+} async_codec_input_scb_t;
+
+
+/* SCB for the SP/DIF CODEC input and output */
+typedef struct _spdifiscb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    status_ptr,     
+	    status_start_ptr
+	)
+
+	u32 current_total;
+	u32 previous_total;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    count,
+	    count_limit
+	)
+
+	u32 status_data;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    status,
+	    free4
+	)
+
+	u32 free3;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    free2,
+	    bit_count
+	)
+
+	u32  temp_status;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_SCB,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_spb
+	)
+
+	u32  strm_rs_config;
+	u32  strm_buf_ptr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    stat_reg_addr, 
+	    fifo_pointer
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    fifo_base_addr, 
+	    st_mo_format
+	)
+
+	u32  free1;
+} spdifiscb_t;
+
+
+/* SCB for the SP/DIF CODEC input and output  */
+typedef struct _spdifoscb_t {		 
+
+
+	u32 free2;     
+
+	u32 free3[4];             
+
+	/* Need to be here for compatibility with AsynchFGTxCode */
+	u32 strm_rs_config;
+                               
+	u32 strm_buf_ptr;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    status,
+	    free5
+	)
+
+	u32 free4;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    next_scb,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_spb
+	)
+
+	u32 free6[2];
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    stat_reg_addr, 
+	    fifo_pointer
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    fifo_base_addr,
+	    st_mo_format
+	)
+
+	u32  free1;                                         
+} spdifoscb_t;
+
+
+
+typedef struct _asynch_fg_rx_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    bot_buf_mask,
+	    buf_Mask
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    max,
+	    min
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    old_producer_pointer,
+	    hfg_scb_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    delta,
+	    adjust_count
+	)
+
+	u32 unused2[5];  
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    sibling_ptr,  
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    code_ptr,
+	    this_ptr
+	)
+
+	u32 strm_rs_config; 
+
+	u32 strm_buf_ptr;
+  
+	u32 unused_phi_incr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    right_targ,   
+	    left_targ
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    right_vol,
+	    left_vol
+	)
+} asynch_fg_rx_scb_t;
+
+
+
+typedef struct _asynch_fg_tx_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    not_buf_mask,
+	    buf_mask
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    max,
+	    min
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused1,
+	    hfg_scb_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    delta,
+	    adjust_count
+	)
+
+	u32 accum_phi;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused2,
+	    const_one_third
+	)
+
+	u32 unused3[3];
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    sibling_ptr,
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    codePtr,
+	    this_ptr
+	)
+
+	u32 strm_rs_config;
+
+	u32 strm_buf_ptr;
+
+	u32 phi_incr;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused_right_targ,
+	    unused_left_targ
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused_right_vol,
+	    unused_left_vol
+	)
+} asynch_fg_tx_scb_t;
+
+
+typedef struct _output_snoop_scb_t {
+	/* First 13 dwords from generic_scb_t */
+	basic_dma_req_t  basic_req;  /* Optional */
+	scatter_gather_ext_t sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    init_snoop_input_link,
+	    snoop_child_input_scb
+	)
+
+	u32 snoop_input_buf_ptr;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved,
+	    input_scb
+	)
+} output_snoop_scb_t;
+
+typedef struct _spio_write_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	    address1,
+	    address2
+	)
+
+	u32 data1;
+
+	u32 data2;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    address3,
+	    address4
+	)
+
+	u32 data3;
+
+	u32 data4;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused1,
+	    data_ptr
+	)
+
+	u32 unused2[2];
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    sibling_ptr,
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_ptr
+	)
+
+	u32 unused3[5];
+} spio_write_scb_t;
+
+typedef struct _magic_snoop_task_t {
+	u32 i0;
+	u32 i1;
+
+	u32 strm_buf_ptr1;
+  
+	u16 i2;
+	u16 snoop_scb;
+
+	u32 i3;
+	u32 i4;
+	u32 i5;
+	u32 i6;
+
+	u32 i7;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_ptr
+	)
+
+	u32 strm_buf_config;
+	u32 strm_buf_ptr2;
+
+	u32 i8;
+
+	volume_control_t vdec_vol_ctrl;
+} magic_snoop_task_t;
+
+
+typedef struct _filter_scb_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	      a0_right,          /* 0x00 */
+	      a0_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      a1_right,          /* 0x01 */
+	      a1_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      a2_right,          /* 0x02 */
+	      a2_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      output_buf_ptr,    /* 0x03 */
+	      init
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      filter_unused3,    /* 0x04 */
+	      filter_unused2
+	)
+
+	u32 prev_sample_output1; /* 0x05 */
+	u32 prev_sample_output2; /* 0x06 */
+	u32 prev_sample_input1;  /* 0x07 */
+	u32 prev_sample_input2;  /* 0x08 */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      next_scb_ptr,      /* 0x09 */
+	      sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      entry_point,       /* 0x0A */
+	      spb_ptr
+	)
+
+	u32  strm_rs_config;     /* 0x0B */
+	u32  strm_buf_ptr;       /* 0x0C */
+
+	___DSP_DUAL_16BIT_ALLOC(
+              b0_right,          /* 0x0D */
+	      b0_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+              b1_right,          /* 0x0E */
+	      b1_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+              b2_right,          /* 0x0F */
+	      b2_left
+	)
+} filter_scb_t;
+#endif /* __DSP_SCB_TYPES_H__ */
diff --git a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h
new file mode 100644
index 000000000000..10014cb62423
--- /dev/null
+++ b/include/sound/cs46xx_dsp_spos.h
@@ -0,0 +1,233 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __CS46XX_DSP_SPOS_H__
+#define __CS46XX_DSP_SPOS_H__
+
+#include "cs46xx_dsp_scb_types.h"
+#include "cs46xx_dsp_task_types.h"
+
+#define SYMBOL_CONSTANT  0x0
+#define SYMBOL_SAMPLE    0x1
+#define SYMBOL_PARAMETER 0x2
+#define SYMBOL_CODE      0x3
+
+#define SEGTYPE_SP_PROGRAM              0x00000001
+#define SEGTYPE_SP_PARAMETER            0x00000002
+#define SEGTYPE_SP_SAMPLE               0x00000003
+#define SEGTYPE_SP_COEFFICIENT          0x00000004
+
+#define DSP_SPOS_UU      0x0deadul     /* unused */
+#define DSP_SPOS_DC      0x0badul      /* don't care */
+#define DSP_SPOS_DC_DC   0x0bad0badul  /* don't care */
+#define DSP_SPOS_UUUU    0xdeadc0edul  /* unused */
+#define DSP_SPOS_UUHI    0xdeadul
+#define DSP_SPOS_UULO    0xc0edul
+#define DSP_SPOS_DCDC    0x0badf1d0ul  /* don't care */
+#define DSP_SPOS_DCDCHI  0x0badul
+#define DSP_SPOS_DCDCLO  0xf1d0ul
+
+#define DSP_MAX_TASK_NAME   60
+#define DSP_MAX_SYMBOL_NAME 100
+#define DSP_MAX_SCB_NAME    60
+#define DSP_MAX_SCB_DESC    200
+#define DSP_MAX_TASK_DESC   50
+
+#define DSP_MAX_PCM_CHANNELS 32
+#define DSP_MAX_SRC_NR       14
+
+#define DSP_PCM_MAIN_CHANNEL        1
+#define DSP_PCM_REAR_CHANNEL        2
+#define DSP_PCM_CENTER_LFE_CHANNEL  3
+#define DSP_PCM_S71_CHANNEL         4 /* surround 7.1 */
+#define DSP_IEC958_CHANNEL          5
+
+#define DSP_SPDIF_STATUS_OUTPUT_ENABLED       1
+#define DSP_SPDIF_STATUS_PLAYBACK_OPEN        2
+#define DSP_SPDIF_STATUS_HW_ENABLED           4
+#define DSP_SPDIF_STATUS_INPUT_CTRL_ENABLED   8
+
+struct _dsp_module_desc_t;
+
+typedef struct _symbol_entry_t {
+	u32 address;
+	char symbol_name[DSP_MAX_SYMBOL_NAME];
+	int symbol_type;
+
+	/* initialized by driver */
+	struct _dsp_module_desc_t * module;
+	int deleted;
+} symbol_entry_t;
+
+typedef struct _symbol_desc_t {
+	int nsymbols;
+
+	symbol_entry_t * symbols;
+
+	/* initialized by driver */
+	int highest_frag_index;
+} symbol_desc_t;
+
+
+typedef struct _segment_desc_t {
+	int segment_type;
+	u32 offset;
+	u32 size;
+	u32 * data;
+} segment_desc_t;
+
+typedef struct _dsp_module_desc_t {
+	char * module_name;
+	symbol_desc_t symbol_table;
+	int nsegments;
+	segment_desc_t * segments;
+
+	/* initialized by driver */
+	u32 overlay_begin_address;
+	u32 load_address;
+	int nfixups;
+} dsp_module_desc_t;
+
+typedef struct _dsp_scb_descriptor_t {
+	char scb_name[DSP_MAX_SCB_NAME];
+	u32 address;
+	int index;
+
+	struct _dsp_scb_descriptor_t * sub_list_ptr;
+	struct _dsp_scb_descriptor_t * next_scb_ptr;
+	struct _dsp_scb_descriptor_t * parent_scb_ptr;
+
+	symbol_entry_t * task_entry;
+	symbol_entry_t * scb_symbol;
+
+	snd_info_entry_t *proc_info;
+	int ref_count;
+	spinlock_t lock;
+
+	int deleted;
+} dsp_scb_descriptor_t;
+
+typedef struct _dsp_task_descriptor_t {
+	char task_name[DSP_MAX_TASK_NAME];
+	int size;
+	u32 address;
+	int index;
+} dsp_task_descriptor_t;
+
+typedef struct _pcm_channel_descriptor_t {
+	int active;
+	int src_slot;
+	int pcm_slot;
+	u32 sample_rate;
+	u32 unlinked;
+	dsp_scb_descriptor_t * pcm_reader_scb;
+	dsp_scb_descriptor_t * src_scb;
+	dsp_scb_descriptor_t * mixer_scb;
+
+	void * private_data;
+} pcm_channel_descriptor_t;
+
+typedef struct _dsp_spos_instance_t {
+	symbol_desc_t symbol_table; /* currently availble loaded symbols in SP */
+
+	int nmodules;
+	dsp_module_desc_t * modules; /* modules loaded into SP */
+
+	segment_desc_t code;
+
+	/* Main PCM playback mixer */
+	dsp_scb_descriptor_t * master_mix_scb;
+	u16 dac_volume_right;
+	u16 dac_volume_left;
+
+	/* Rear/surround PCM playback mixer */
+	dsp_scb_descriptor_t * rear_mix_scb;
+
+	/* Center/LFE mixer */
+	dsp_scb_descriptor_t * center_lfe_mix_scb;
+
+	int npcm_channels;
+	int nsrc_scb;
+	pcm_channel_descriptor_t pcm_channels[DSP_MAX_PCM_CHANNELS];
+	int src_scb_slots[DSP_MAX_SRC_NR];
+
+	/* cache this symbols */
+	symbol_entry_t * null_algorithm; /* used by PCMreaderSCB's */
+	symbol_entry_t * s16_up;         /* used by SRCtaskSCB's */
+
+	/* proc fs */  
+	snd_card_t * snd_card;
+	snd_info_entry_t * proc_dsp_dir;
+	snd_info_entry_t * proc_sym_info_entry;
+	snd_info_entry_t * proc_modules_info_entry;
+	snd_info_entry_t * proc_parameter_dump_info_entry;
+	snd_info_entry_t * proc_sample_dump_info_entry;
+
+	/* SCB's descriptors */
+	int nscb;
+	int scb_highest_frag_index;
+	dsp_scb_descriptor_t scbs[DSP_MAX_SCB_DESC];
+	snd_info_entry_t * proc_scb_info_entry;
+	dsp_scb_descriptor_t * the_null_scb;
+
+	/* Task's descriptors */
+	int ntask;
+	dsp_task_descriptor_t tasks[DSP_MAX_TASK_DESC];
+	snd_info_entry_t * proc_task_info_entry;
+
+	/* SPDIF status */
+	int spdif_status_out;
+	int spdif_status_in;
+	u16 spdif_input_volume_right;
+	u16 spdif_input_volume_left;
+	/* spdif channel status,
+	   left right and user validity bits */
+	unsigned int spdif_csuv_default;
+	unsigned int spdif_csuv_stream;
+
+	/* SPDIF input sample rate converter */
+	dsp_scb_descriptor_t * spdif_in_src;
+	/* SPDIF input asynch. receiver */
+	dsp_scb_descriptor_t * asynch_rx_scb;
+
+	/* Capture record mixer SCB */
+	dsp_scb_descriptor_t * record_mixer_scb;
+    
+	/* CODEC input SCB */
+	dsp_scb_descriptor_t * codec_in_scb;
+
+	/* reference snooper */
+	dsp_scb_descriptor_t * ref_snoop_scb;
+
+	/* SPDIF output  PCM reference  */
+	dsp_scb_descriptor_t * spdif_pcm_input_scb;
+
+	/* asynch TX task */
+	dsp_scb_descriptor_t * asynch_tx_scb;
+
+	/* record sources */
+	dsp_scb_descriptor_t * pcm_input;
+	dsp_scb_descriptor_t * adc_input;
+
+	int spdif_in_sample_rate;
+} dsp_spos_instance_t;
+
+#endif /* __DSP_SPOS_H__ */
diff --git a/include/sound/cs46xx_dsp_task_types.h b/include/sound/cs46xx_dsp_task_types.h
new file mode 100644
index 000000000000..5dd3bf69cb03
--- /dev/null
+++ b/include/sound/cs46xx_dsp_task_types.h
@@ -0,0 +1,253 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst 
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP) 
+ */
+
+#ifndef __CS46XX_DSP_TASK_TYPES_H__
+#define __CS46XX_DSP_TASK_TYPES_H__
+
+#include "cs46xx_dsp_scb_types.h"
+
+/*********************************************************************************************
+Example hierarchy of stream control blocks in the SP
+
+hfgTree
+Ptr____Call (c)
+       \
+ -------+------         -------------      -------------      -------------      -----
+| SBlaster IF  |______\| Foreground  |___\| Middlegr'nd |___\| Background  |___\| Nul |
+|              |Goto  /| tree header |g  /| tree header |g  /| tree header |g  /| SCB |r
+ -------------- (g)     -------------      -------------      -------------      -----
+       |c                     |c                 |c                 |c
+       |                      |                  |                  |
+      \/                  -------------      -------------      -------------   
+                       | Foreground  |_\  | Middlegr'nd |_\  | Background  |_\
+                       |     tree    |g/  |    tree     |g/  |     tree    |g/
+                        -------------      -------------      -------------   
+                              |c                 |c                 |c
+                              |                  |                  | 
+                             \/                 \/                 \/ 
+
+*********************************************************************************************/
+
+#define		HFG_FIRST_EXECUTE_MODE			0x0001
+#define		HFG_FIRST_EXECUTE_MODE_BIT		0
+#define		HFG_CONTEXT_SWITCH_MODE			0x0002
+#define		HFG_CONTEXT_SWITCH_MODE_BIT		1
+
+#define MAX_FG_STACK_SIZE 	32			/* THESE NEED TO BE COMPUTED PROPERLY */
+#define MAX_MG_STACK_SIZE 	16
+#define MAX_BG_STACK_SIZE 	9
+#define MAX_HFG_STACK_SIZE	4
+
+#define SLEEP_ACTIVE_INCREMENT		0		/* Enable task tree thread to go to sleep
+											   This should only ever be used on the Background thread */
+#define STANDARD_ACTIVE_INCREMENT	1		/* Task tree thread normal operation */
+#define SUSPEND_ACTIVE_INCREMENT	2		/* Cause execution to suspend in the task tree thread
+                                               This should only ever be used on the Background thread */
+
+#define HOSTFLAGS_DISABLE_BG_SLEEP  0       /* Host-controlled flag that determines whether we go to sleep
+                                               at the end of BG */
+
+/* Minimal context save area for Hyper Forground */
+typedef struct _hf_save_area_t {
+	u32	r10_save;
+	u32	r54_save;
+	u32	r98_save;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    status_save,
+	    ind_save
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    rci1_save,
+	    rci0_save
+	)
+
+	u32	r32_save;
+	u32	r76_save;
+	u32	rsd2_save;
+
+       	___DSP_DUAL_16BIT_ALLOC(
+	      rsi2_save,	  /* See TaskTreeParameterBlock for 
+				     remainder of registers  */
+	      rsa2Save
+	)
+	/* saved as part of HFG context  */
+} hf_save_area_t;
+
+
+/* Task link data structure */
+typedef struct _tree_link_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Pointer to sibling task control block */
+	    next_scb,
+	/* Pointer to child task control block */
+	    sub_ptr
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Pointer to code entry point */
+	    entry_point, 
+	/* Pointer to local data */
+	    this_spb
+	)
+} tree_link_t;
+
+
+typedef struct _task_tree_data_t {
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Initial tock count; controls task tree execution rate */
+	    tock_count_limit,
+	/* Tock down counter */
+	    tock_count
+	)
+
+	/* Add to ActiveCount when TockCountLimit reached: 
+	   Subtract on task tree termination */
+	___DSP_DUAL_16BIT_ALLOC(
+	    active_tncrement,		
+	/* Number of pending activations for task tree */
+	    active_count
+	)
+
+        ___DSP_DUAL_16BIT_ALLOC(
+	/* BitNumber to enable modification of correct bit in ActiveTaskFlags */
+	    active_bit,	    
+	/* Pointer to OS location for indicating current activity on task level */
+	    active_task_flags_ptr
+	)
+
+	/* Data structure for controlling movement of memory blocks:- 
+	   currently unused */
+	___DSP_DUAL_16BIT_ALLOC(
+	    mem_upd_ptr,
+	/* Data structure for controlling synchronous link update */
+	    link_upd_ptr
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Save area for remainder of full context. */
+	    save_area,
+	/* Address of start of local stack for data storage */
+	    data_stack_base_ptr
+	)
+
+} task_tree_data_t;
+
+
+
+typedef struct _interval_timer_data_t
+{
+	/* These data items have the same relative locations to those */
+	___DSP_DUAL_16BIT_ALLOC(
+	     interval_timer_period,
+	     itd_unused
+	)
+
+	/* used for this data in the SPOS control block for SPOS 1.0 */
+	___DSP_DUAL_16BIT_ALLOC(
+	     num_FG_ticks_this_interval,        
+	     num_intervals
+	)
+} interval_timer_data_t;    
+
+
+/* This structure contains extra storage for the task tree
+   Currently, this additional data is related only to a full context save */
+typedef struct _task_tree_context_block_t {
+	/* Up to 10 values are saved onto the stack.  8 for the task tree, 1 for
+	   The access to the context switch (call or interrupt), and 1 spare that
+	   users should never use.  This last may be required by the system */
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack1,
+	     stack0
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack3,
+	     stack2
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack5,
+	     stack4
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack7,
+	     stack6
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack9,
+	     stack8
+	)
+
+	u32	  saverfe;					
+
+	/* Value may be overwriten by stack save algorithm.
+	   Retain the size of the stack data saved here if used */
+	___DSP_DUAL_16BIT_ALLOC(
+             reserved1,	
+  	     stack_size
+	)
+	u32		saverba;	  /* (HFG) */
+	u32		saverdc;
+	u32		savers_config_23; /* (HFG) */
+	u32		savers_DMA23;	  /* (HFG) */
+	u32		saversa0;
+	u32		saversi0;
+	u32		saversa1;
+	u32		saversi1;
+	u32		saversa3;
+	u32		saversd0;
+	u32		saversd1;
+	u32		saversd3;
+	u32		savers_config01;
+	u32		savers_DMA01;
+	u32		saveacc0hl;
+	u32		saveacc1hl;
+	u32		saveacc0xacc1x;
+	u32		saveacc2hl;
+	u32		saveacc3hl;
+	u32		saveacc2xacc3x;
+	u32		saveaux0hl;
+	u32		saveaux1hl;
+	u32		saveaux0xaux1x;
+	u32		saveaux2hl;
+	u32		saveaux3hl;
+	u32		saveaux2xaux3x;
+	u32		savershouthl;
+	u32		savershoutxmacmode;
+} task_tree_context_block_t;						  
+                
+
+typedef struct _task_tree_control_block_t	{
+	hf_save_area_t		 	context;
+	tree_link_t			links;
+	task_tree_data_t		data;
+	task_tree_context_block_t	context_blk;
+	interval_timer_data_t		int_timer;
+} task_tree_control_block_t;
+
+
+#endif /* __DSP_TASK_TYPES_H__ */
diff --git a/include/sound/cs8403.h b/include/sound/cs8403.h
new file mode 100644
index 000000000000..0b7d216e24f1
--- /dev/null
+++ b/include/sound/cs8403.h
@@ -0,0 +1,257 @@
+#ifndef __SOUND_CS8403_H
+#define __SOUND_CS8403_H
+
+/*
+ *  Routines for Cirrus Logic CS8403/CS8404A IEC958 (S/PDIF) Transmitter
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *		     Takashi Iwai <tiwai@suse.de>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifdef SND_CS8403
+
+#ifndef SND_CS8403_DECL
+#define SND_CS8403_DECL static
+#endif
+#ifndef SND_CS8403_DECODE
+#define SND_CS8403_DECODE snd_cs8403_decode_spdif_bits
+#endif
+#ifndef SND_CS8403_ENCODE
+#define SND_CS8403_ENCODE snd_cs8403_encode_spdif_bits
+#endif
+
+
+SND_CS8403_DECL void SND_CS8403_DECODE(snd_aes_iec958_t *diga, unsigned char bits)
+{
+	if (bits & 0x01) {	/* consumer */
+		if (!(bits & 0x02))
+			diga->status[0] |= IEC958_AES0_NONAUDIO;
+		if (!(bits & 0x08))
+			diga->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+		switch (bits & 0x10) {
+		case 0x10: diga->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_CON_EMPHASIS_5015; break;
+		}
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_CON_ORIGINAL;
+		switch (bits & 0x60) {
+		case 0x00: diga->status[1] |= IEC958_AES1_CON_MAGNETIC_ID; break;
+		case 0x20: diga->status[1] |= IEC958_AES1_CON_DIGDIGCONV_ID; break;
+		case 0x40: diga->status[1] |= IEC958_AES1_CON_LASEROPT_ID; break;
+		case 0x60: diga->status[1] |= IEC958_AES1_CON_GENERAL; break;
+		}
+		switch (bits & 0x06) {
+		case 0x00: diga->status[3] |= IEC958_AES3_CON_FS_44100; break;
+		case 0x02: diga->status[3] |= IEC958_AES3_CON_FS_48000; break;
+		case 0x04: diga->status[3] |= IEC958_AES3_CON_FS_32000; break;
+		}
+	} else {
+		diga->status[0] = IEC958_AES0_PROFESSIONAL;
+		switch (bits & 0x18) {
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_FS_32000; break;
+		case 0x10: diga->status[0] |= IEC958_AES0_PRO_FS_44100; break;
+		case 0x08: diga->status[0] |= IEC958_AES0_PRO_FS_48000; break;
+		case 0x18: diga->status[0] |= IEC958_AES0_PRO_FS_NOTID; break;
+		}
+		switch (bits & 0x60) {
+		case 0x20: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NONE; break;
+		case 0x40: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_5015; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_CCITT; break;
+		case 0x60: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NOTID; break;
+		}
+		if (bits & 0x80)
+			diga->status[1] |= IEC958_AES1_PRO_MODE_STEREOPHONIC;
+	}
+}
+
+SND_CS8403_DECL unsigned char SND_CS8403_ENCODE(snd_aes_iec958_t *diga)
+{
+	unsigned char bits;
+
+	if (!(diga->status[0] & IEC958_AES0_PROFESSIONAL)) {
+		bits = 0x01;	/* consumer mode */
+		if (diga->status[0] & IEC958_AES0_NONAUDIO)
+			bits &= ~0x02;
+		else
+			bits |= 0x02;
+		if (diga->status[0] & IEC958_AES0_CON_NOT_COPYRIGHT)
+			bits &= ~0x08;
+		else
+			bits |= 0x08;
+		switch (diga->status[0] & IEC958_AES0_CON_EMPHASIS) {
+		default:
+		case IEC958_AES0_CON_EMPHASIS_NONE: bits |= 0x10; break;
+		case IEC958_AES0_CON_EMPHASIS_5015: bits |= 0x00; break;
+		}
+		if (diga->status[1] & IEC958_AES1_CON_ORIGINAL)
+			bits &= ~0x80;
+		else
+			bits |= 0x80;
+		if ((diga->status[1] & IEC958_AES1_CON_CATEGORY) == IEC958_AES1_CON_GENERAL)
+			bits |= 0x60;
+		else {
+			switch(diga->status[1] & IEC958_AES1_CON_MAGNETIC_MASK) {
+			case IEC958_AES1_CON_MAGNETIC_ID:
+				bits |= 0x00; break;
+			case IEC958_AES1_CON_DIGDIGCONV_ID:
+				bits |= 0x20; break;
+			default:
+			case IEC958_AES1_CON_LASEROPT_ID:
+				bits |= 0x40; break;
+			}
+		}
+		switch (diga->status[3] & IEC958_AES3_CON_FS) {
+		default:
+		case IEC958_AES3_CON_FS_44100: bits |= 0x00; break;
+		case IEC958_AES3_CON_FS_48000: bits |= 0x02; break;
+		case IEC958_AES3_CON_FS_32000: bits |= 0x04; break;
+		}
+	} else {
+		bits = 0x00;	/* professional mode */
+		if (diga->status[0] & IEC958_AES0_NONAUDIO)
+			bits &= ~0x02;
+		else
+			bits |= 0x02;
+		/* CHECKME: I'm not sure about the bit order in val here */
+		switch (diga->status[0] & IEC958_AES0_PRO_FS) {
+		case IEC958_AES0_PRO_FS_32000:	bits |= 0x00; break;
+		case IEC958_AES0_PRO_FS_44100:	bits |= 0x10; break;	/* 44.1kHz */
+		case IEC958_AES0_PRO_FS_48000:	bits |= 0x08; break;	/* 48kHz */
+		default:
+		case IEC958_AES0_PRO_FS_NOTID: bits |= 0x18; break;
+		}
+		switch (diga->status[0] & IEC958_AES0_PRO_EMPHASIS) {
+		case IEC958_AES0_PRO_EMPHASIS_NONE: bits |= 0x20; break;
+		case IEC958_AES0_PRO_EMPHASIS_5015: bits |= 0x40; break;
+		case IEC958_AES0_PRO_EMPHASIS_CCITT: bits |= 0x00; break;
+		default:
+		case IEC958_AES0_PRO_EMPHASIS_NOTID: bits |= 0x60; break;
+		}
+		switch (diga->status[1] & IEC958_AES1_PRO_MODE) {
+		case IEC958_AES1_PRO_MODE_TWO:
+		case IEC958_AES1_PRO_MODE_STEREOPHONIC: bits |= 0x00; break;
+		default: bits |= 0x80; break;
+		}
+	}
+	return bits;
+}
+
+#endif /* SND_CS8403 */
+
+#ifdef SND_CS8404
+
+#ifndef SND_CS8404_DECL
+#define SND_CS8404_DECL static
+#endif
+#ifndef SND_CS8404_DECODE
+#define SND_CS8404_DECODE snd_cs8404_decode_spdif_bits
+#endif
+#ifndef SND_CS8404_ENCODE
+#define SND_CS8404_ENCODE snd_cs8404_encode_spdif_bits
+#endif
+
+
+SND_CS8404_DECL void SND_CS8404_DECODE(snd_aes_iec958_t *diga, unsigned char bits)
+{
+	if (bits & 0x10) {	/* consumer */
+		if (!(bits & 0x20))
+			diga->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+		if (!(bits & 0x40))
+			diga->status[0] |= IEC958_AES0_CON_EMPHASIS_5015;
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_CON_ORIGINAL;
+		switch (bits & 0x03) {
+		case 0x00: diga->status[1] |= IEC958_AES1_CON_DAT; break;
+		case 0x03: diga->status[1] |= IEC958_AES1_CON_GENERAL; break;
+		}
+		switch (bits & 0x06) {
+		case 0x02: diga->status[3] |= IEC958_AES3_CON_FS_32000; break;
+		case 0x04: diga->status[3] |= IEC958_AES3_CON_FS_48000; break;
+		case 0x06: diga->status[3] |= IEC958_AES3_CON_FS_44100; break;
+		}
+	} else {
+		diga->status[0] = IEC958_AES0_PROFESSIONAL;
+		if (!(bits & 0x04))
+			diga->status[0] |= IEC958_AES0_NONAUDIO;
+		switch (bits & 0x60) {
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_FS_32000; break;
+		case 0x40: diga->status[0] |= IEC958_AES0_PRO_FS_44100; break;
+		case 0x20: diga->status[0] |= IEC958_AES0_PRO_FS_48000; break;
+		case 0x60: diga->status[0] |= IEC958_AES0_PRO_FS_NOTID; break;
+		}
+		switch (bits & 0x03) {
+		case 0x02: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NONE; break;
+		case 0x01: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_5015; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_CCITT; break;
+		case 0x03: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NOTID; break;
+		}
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_PRO_MODE_STEREOPHONIC;
+	}
+}
+
+SND_CS8404_DECL unsigned char SND_CS8404_ENCODE(snd_aes_iec958_t *diga)
+{
+	unsigned char bits;
+
+	if (!(diga->status[0] & IEC958_AES0_PROFESSIONAL)) {
+		bits = 0x10;	/* consumer mode */
+		if (!(diga->status[0] & IEC958_AES0_CON_NOT_COPYRIGHT))
+			bits |= 0x20;
+		if ((diga->status[0] & IEC958_AES0_CON_EMPHASIS) == IEC958_AES0_CON_EMPHASIS_NONE)
+			bits |= 0x40;
+		if (!(diga->status[1] & IEC958_AES1_CON_ORIGINAL))
+			bits |= 0x80;
+		if ((diga->status[1] & IEC958_AES1_CON_CATEGORY) == IEC958_AES1_CON_GENERAL)
+			bits |= 0x03;
+		switch (diga->status[3] & IEC958_AES3_CON_FS) {
+		default:
+		case IEC958_AES3_CON_FS_44100: bits |= 0x06; break;
+		case IEC958_AES3_CON_FS_48000: bits |= 0x04; break;
+		case IEC958_AES3_CON_FS_32000: bits |= 0x02; break;
+		}
+	} else {
+		bits = 0x00;	/* professional mode */
+		if (!(diga->status[0] & IEC958_AES0_NONAUDIO))
+			bits |= 0x04;
+		switch (diga->status[0] & IEC958_AES0_PRO_FS) {
+		case IEC958_AES0_PRO_FS_32000:	bits |= 0x00; break;
+		case IEC958_AES0_PRO_FS_44100:	bits |= 0x40; break;	/* 44.1kHz */
+		case IEC958_AES0_PRO_FS_48000:	bits |= 0x20; break;	/* 48kHz */
+		default:
+		case IEC958_AES0_PRO_FS_NOTID:	bits |= 0x00; break;
+		}
+		switch (diga->status[0] & IEC958_AES0_PRO_EMPHASIS) {
+		case IEC958_AES0_PRO_EMPHASIS_NONE: bits |= 0x02; break;
+		case IEC958_AES0_PRO_EMPHASIS_5015: bits |= 0x01; break;
+		case IEC958_AES0_PRO_EMPHASIS_CCITT: bits |= 0x00; break;
+		default:
+		case IEC958_AES0_PRO_EMPHASIS_NOTID: bits |= 0x03; break;
+		}
+		switch (diga->status[1] & IEC958_AES1_PRO_MODE) {
+		case IEC958_AES1_PRO_MODE_TWO:
+		case IEC958_AES1_PRO_MODE_STEREOPHONIC: bits |= 0x00; break;
+		default: bits |= 0x80; break;
+		}
+	}
+	return bits;
+}
+
+#endif /* SND_CS8404 */
+
+#endif /* __SOUND_CS8403_H */
diff --git a/include/sound/cs8427.h b/include/sound/cs8427.h
new file mode 100644
index 000000000000..e725b7049a53
--- /dev/null
+++ b/include/sound/cs8427.h
@@ -0,0 +1,196 @@
+#ifndef __SOUND_CS8427_H
+#define __SOUND_CS8427_H
+
+/*
+ *  Routines for Cirrus Logic CS8427
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/i2c.h>
+
+#define CS8427_BASE_ADDR	0x10	/* base I2C address */
+
+#define CS8427_REG_AUTOINC	0x80	/* flag - autoincrement */
+#define CS8427_REG_CONTROL1	0x01
+#define CS8427_REG_CONTROL2	0x02
+#define CS8427_REG_DATAFLOW	0x03
+#define CS8427_REG_CLOCKSOURCE	0x04
+#define CS8427_REG_SERIALINPUT	0x05
+#define CS8427_REG_SERIALOUTPUT	0x06
+#define CS8427_REG_INT1STATUS	0x07
+#define CS8427_REG_INT2STATUS	0x08
+#define CS8427_REG_INT1MASK	0x09
+#define CS8427_REG_INT1MODEMSB	0x0a
+#define CS8427_REG_INT1MODELSB	0x0b
+#define CS8427_REG_INT2MASK	0x0c
+#define CS8427_REG_INT2MODEMSB	0x0d
+#define CS8427_REG_INT2MODELSB	0x0e
+#define CS8427_REG_RECVCSDATA	0x0f
+#define CS8427_REG_RECVERRORS	0x10
+#define CS8427_REG_RECVERRMASK	0x11
+#define CS8427_REG_CSDATABUF	0x12
+#define CS8427_REG_UDATABUF	0x13
+#define CS8427_REG_QSUBCODE	0x14	/* 0x14-0x1d (10 bytes) */
+#define CS8427_REG_OMCKRMCKRATIO 0x1e
+#define CS8427_REG_CORU_DATABUF	0x20	/* 24 byte buffer area */
+#define CS8427_REG_ID_AND_VER	0x7f
+
+/* CS8427_REG_CONTROL1 bits */
+#define CS8427_SWCLK		(1<<7)	/* 0 = RMCK default, 1 = OMCK output on RMCK pin */
+#define CS8427_VSET		(1<<6)	/* 0 = valid PCM data, 1 = invalid PCM data */
+#define CS8427_MUTESAO		(1<<5)	/* mute control for the serial audio output port, 0 = disabled, 1 = enabled */
+#define CS8427_MUTEAES		(1<<4)	/* mute control for the AES transmitter output, 0 = disabled, 1 = enabled */
+#define CS8427_INTMASK		(3<<1)	/* interrupt output pin setup mask */
+#define CS8427_INTACTHIGH	(0<<1)	/* active high */
+#define CS8427_INTACTLOW	(1<<1)	/* active low */
+#define CS8427_INTOPENDRAIN	(2<<1)	/* open drain, active low */
+#define CS8427_TCBLDIR		(1<<0)	/* 0 = TCBL is an input, 1 = TCBL is an output */
+
+/* CS8427_REQ_CONTROL2 bits */
+#define CS8427_HOLDMASK		(3<<5)	/* action when a receiver error occurs */
+#define CS8427_HOLDLASTSAMPLE	(0<<5)	/* hold the last valid sample */
+#define CS8427_HOLDZERO		(1<<5)	/* replace the current audio sample with zero (mute) */
+#define CS8427_HOLDNOCHANGE	(2<<5)	/* do not change the received audio sample */
+#define CS8427_RMCKF		(1<<4)	/* 0 = 256*Fsi, 1 = 128*Fsi */
+#define CS8427_MMR		(1<<3)	/* AES3 receiver operation, 0 = stereo, 1 = mono */
+#define CS8427_MMT		(1<<2)	/* AES3 transmitter operation, 0 = stereo, 1 = mono */
+#define CS8427_MMTCS		(1<<1)	/* 0 = use A + B CS data, 1 = use MMTLR CS data */
+#define CS8427_MMTLR		(1<<0)	/* 0 = use A CS data, 1 = use B CS data */
+
+/* CS8427_REG_DATAFLOW */
+#define CS8427_TXOFF		(1<<6)	/* AES3 transmitter Output, 0 = normal operation, 1 = off (0V) */
+#define CS8427_AESBP		(1<<5)	/* AES3 hardware bypass mode, 0 = normal, 1 = bypass (RX->TX) */
+#define CS8427_TXDMASK		(3<<3)	/* AES3 Transmitter Data Source Mask */
+#define CS8427_TXDSERIAL	(1<<3)	/* TXD - serial audio input port */
+#define CS8427_TXAES3DRECEIVER	(2<<3)	/* TXD - AES3 receiver */
+#define CS8427_SPDMASK		(3<<1)	/* Serial Audio Output Port Data Source Mask */
+#define CS8427_SPDSERIAL	(1<<1)	/* SPD - serial audio input port */
+#define CS8427_SPDAES3RECEIVER	(2<<1)	/* SPD - AES3 receiver */
+
+/* CS8427_REG_CLOCKSOURCE */
+#define CS8427_RUN		(1<<6)	/* 0 = clock off, 1 = clock on */
+#define CS8427_CLKMASK		(3<<4)	/* OMCK frequency mask */
+#define CS8427_CLK256		(0<<4)	/* 256*Fso */
+#define CS8427_CLK384		(1<<4)	/* 384*Fso */
+#define CS8427_CLK512		(2<<4)	/* 512*Fso */
+#define CS8427_OUTC		(1<<3)	/* Output Time Base, 0 = OMCK, 1 = recovered input clock */
+#define CS8427_INC		(1<<2)	/* Input Time Base Clock Source, 0 = recoverd input clock, 1 = OMCK input pin */
+#define CS8427_RXDMASK		(3<<0)	/* Recovered Input Clock Source Mask */
+#define CS8427_RXDILRCK		(0<<0)	/* 256*Fsi from ILRCK pin */
+#define CS8427_RXDAES3INPUT	(1<<0)	/* 256*Fsi from AES3 input */
+#define CS8427_EXTCLOCKRESET	(2<<0)	/* bypass PLL, 256*Fsi clock, synchronous reset */
+#define CS8427_EXTCLOCK		(3<<0)	/* bypass PLL, 256*Fsi clock */
+
+/* CS8427_REG_SERIALINPUT */
+#define CS8427_SIMS		(1<<7)	/* 0 = slave, 1 = master mode */
+#define CS8427_SISF		(1<<6)	/* ISCLK freq, 0 = 64*Fsi, 1 = 128*Fsi */
+#define CS8427_SIRESMASK	(3<<4)	/* Resolution of the input data for right justified formats */
+#define CS8427_SIRES24		(0<<4)	/* SIRES 24-bit */
+#define CS8427_SIRES20		(1<<4)	/* SIRES 20-bit */
+#define CS8427_SIRES16		(2<<4)	/* SIRES 16-bit */
+#define CS8427_SIJUST		(1<<3)	/* Justification of SDIN data relative to ILRCK, 0 = left-justified, 1 = right-justified */
+#define CS8427_SIDEL		(1<<2)	/* Delay of SDIN data relative to ILRCK for left-justified data formats, 0 = first ISCLK period, 1 = second ISCLK period */
+#define CS8427_SISPOL		(1<<1)	/* ICLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
+#define CS8427_SILRPOL		(1<<0)	/* ILRCK clock polarity, 0 = SDIN data left channel when ILRCK is high, 1 = SDIN right when ILRCK is high */
+
+/* CS8427_REG_SERIALOUTPUT */
+#define CS8427_SOMS		(1<<7)	/* 0 = slave, 1 = master mode */
+#define CS8427_SOSF		(1<<6)	/* OSCLK freq, 0 = 64*Fso, 1 = 128*Fso */
+#define CS8427_SORESMASK	(3<<4)	/* Resolution of the output data on SDOUT and AES3 output */
+#define CS8427_SORES24		(0<<4)	/* SIRES 24-bit */
+#define CS8427_SORES20		(1<<4)	/* SIRES 20-bit */
+#define CS8427_SORES16		(2<<4)	/* SIRES 16-bit */
+#define CS8427_SORESDIRECT	(2<<4)	/* SIRES direct copy from AES3 receiver */
+#define CS8427_SOJUST		(1<<3)	/* Justification of SDOUT data relative to OLRCK, 0 = left-justified, 1 = right-justified */
+#define CS8427_SODEL		(1<<2)	/* Delay of SDOUT data relative to OLRCK for left-justified data formats, 0 = first OSCLK period, 1 = second OSCLK period */
+#define CS8427_SOSPOL		(1<<1)	/* OSCLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
+#define CS8427_SOLRPOL		(1<<0)	/* OLRCK clock polarity, 0 = SDOUT data left channel when OLRCK is high, 1 = SDOUT right when OLRCK is high */
+
+/* CS8427_REG_INT1STATUS */
+#define CS8427_TSLIP		(1<<7)	/* AES3 transmitter source data slip interrupt */
+#define CS8427_OSLIP		(1<<6)	/* Serial audio output port data slip interrupt */
+#define CS8427_DETC		(1<<2)	/* D to E C-buffer transfer interrupt */
+#define CS8427_EFTC		(1<<1)	/* E to F C-buffer transfer interrupt */
+#define CS8427_RERR		(1<<0)	/* A receiver error has occurred */
+
+/* CS8427_REG_INT2STATUS */
+#define CS8427_DETU		(1<<3)	/* D to E U-buffer transfer interrupt */
+#define CS8427_EFTU		(1<<2)	/* E to F U-buffer transfer interrupt */
+#define CS8427_QCH		(1<<1)	/* A new block of Q-subcode data is available for reading */
+
+/* CS8427_REG_INT1MODEMSB && CS8427_REG_INT1MODELSB */
+/* bits are defined in CS8427_REG_INT1STATUS */
+/* CS8427_REG_INT2MODEMSB && CS8427_REG_INT2MODELSB */
+/* bits are defined in CS8427_REG_INT2STATUS */
+#define CS8427_INTMODERISINGMSB	0
+#define CS8427_INTMODERESINGLSB	0
+#define CS8427_INTMODEFALLINGMSB 0
+#define CS8427_INTMODEFALLINGLSB 1
+#define CS8427_INTMODELEVELMSB	1
+#define CS8427_INTMODELEVELLSB	0
+
+/* CS8427_REG_RECVCSDATA */
+#define CS8427_AUXMASK		(15<<4)	/* auxiliary data field width */
+#define CS8427_AUXSHIFT		4
+#define CS8427_PRO		(1<<3)	/* Channel status block format indicator */
+#define CS8427_AUDIO		(1<<2)	/* Audio indicator (0 = audio, 1 = nonaudio */
+#define CS8427_COPY		(1<<1)	/* 0 = copyright asserted, 1 = copyright not asserted */
+#define CS8427_ORIG		(1<<0)	/* SCMS generation indicator, 0 = 1st generation or highter, 1 = original */
+
+/* CS8427_REG_RECVERRORS */
+/* CS8427_REG_RECVERRMASK for CS8427_RERR */
+#define CS8427_QCRC		(1<<6)	/* Q-subcode data CRC error indicator */
+#define CS8427_CCRC		(1<<5)	/* Chancnel Status Block Cyclick Redundancy Check Bit */
+#define CS8427_UNLOCK		(1<<4)	/* PLL lock status bit */
+#define CS8427_V		(1<<3)	/* 0 = valid data */
+#define CS8427_CONF		(1<<2)	/* Confidence bit */
+#define CS8427_BIP		(1<<1)	/* Bi-phase error bit */
+#define CS8427_PAR		(1<<0)	/* Parity error */
+
+/* CS8427_REG_CSDATABUF	*/
+#define CS8427_BSEL		(1<<5)	/* 0 = CS data, 1 = U data */
+#define CS8427_CBMR		(1<<4)	/* 0 = overwrite first 5 bytes for CS D to E buffer, 1 = prevent */
+#define CS8427_DETCI		(1<<3)	/* D to E CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_EFTCI		(1<<2)	/* E to F CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_CAM		(1<<1)	/* CS data buffer control port access mode bit, 0 = one byte, 1 = two byte */
+#define CS8427_CHS		(1<<0)	/* Channel select bit, 0 = Channel A, 1 = Channel B */
+
+/* CS8427_REG_UDATABUF */
+#define CS8427_UD		(1<<4)	/* User data pin (U) direction, 0 = input, 1 = output */
+#define CS8427_UBMMASK		(3<<2)	/* Operating mode of the AES3 U bit manager */
+#define CS8427_UBMZEROS		(0<<2)	/* transmit all zeros mode */
+#define CS8427_UBMBLOCK		(1<<2)	/* block mode */
+#define CS8427_DETUI		(1<<1)	/* D to E U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_EFTUI		(1<<1)	/* E to F U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+
+/* CS8427_REG_ID_AND_VER */
+#define CS8427_IDMASK		(15<<4)
+#define CS8427_IDSHIFT		4
+#define CS8427_VERMASK		(15<<0)
+#define CS8427_VERSHIFT		0
+#define CS8427_VER8427A		0x71
+
+int snd_cs8427_create(snd_i2c_bus_t *bus, unsigned char addr,
+		      unsigned int reset_timeout, snd_i2c_device_t **r_cs8427);
+int snd_cs8427_reg_write(snd_i2c_device_t *device, unsigned char reg, unsigned char val);
+int snd_cs8427_iec958_build(snd_i2c_device_t *cs8427, snd_pcm_substream_t *playback_substream, snd_pcm_substream_t *capture_substream);
+int snd_cs8427_iec958_active(snd_i2c_device_t *cs8427, int active);
+int snd_cs8427_iec958_pcm(snd_i2c_device_t *cs8427, unsigned int rate);
+
+#endif /* __SOUND_CS8427_H */
diff --git a/include/sound/driver.h b/include/sound/driver.h
new file mode 100644
index 000000000000..948e9a1aebef
--- /dev/null
+++ b/include/sound/driver.h
@@ -0,0 +1,64 @@
+#ifndef __SOUND_DRIVER_H
+#define __SOUND_DRIVER_H
+
+/*
+ *  Main header file for the ALSA driver
+ *  Copyright (c) 1994-2000 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifdef ALSA_BUILD
+#include "config.h"
+#endif
+
+#include <linux/config.h>
+
+#define SNDRV_CARDS		8	/* number of supported soundcards - don't change - minor numbers */
+
+#ifndef CONFIG_SND_MAJOR	/* standard configuration */
+#define CONFIG_SND_MAJOR	116
+#endif
+
+#ifndef CONFIG_SND_DEBUG
+#undef CONFIG_SND_DEBUG_MEMORY
+#endif
+
+#ifdef ALSA_BUILD
+#include "adriver.h"
+#endif
+
+#include <linux/module.h>
+
+/*
+ *  ==========================================================================
+ */
+
+#ifdef CONFIG_SND_DEBUG_MEMORY
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+void *snd_wrapper_kmalloc(size_t, int);
+#undef kmalloc
+void snd_wrapper_kfree(const void *);
+#undef kfree
+void *snd_wrapper_vmalloc(size_t);
+#undef vmalloc
+void snd_wrapper_vfree(void *);
+#undef vfree
+#endif
+
+#endif /* __SOUND_DRIVER_H */
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
new file mode 100644
index 000000000000..43b6786abae5
--- /dev/null
+++ b/include/sound/emu10k1.h
@@ -0,0 +1,1544 @@
+#ifndef __SOUND_EMU10K1_H
+#define __SOUND_EMU10K1_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *		     Creative Labs, Inc.
+ *  Definitions for EMU10K1 (SB Live!) chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifdef __KERNEL__
+
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+#include <sound/hwdep.h>
+#include <sound/ac97_codec.h>
+#include <sound/util_mem.h>
+#include <sound/pcm-indirect.h>
+#include <sound/timer.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#ifndef PCI_VENDOR_ID_CREATIVE
+#define PCI_VENDOR_ID_CREATIVE		0x1102
+#endif
+#ifndef PCI_DEVICE_ID_CREATIVE_EMU10K1
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#endif
+
+/* ------------------- DEFINES -------------------- */
+
+#define EMUPAGESIZE     4096
+#define MAXREQVOICES    8
+#define MAXPAGES        8192
+#define RESERVED        0
+#define NUM_MIDI        16
+#define NUM_G           64              /* use all channels */
+#define NUM_FXSENDS     4
+#define NUM_EFX_PLAYBACK    16
+
+/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
+#define EMU10K1_DMA_MASK	0x7fffffffUL	/* 31bit */
+#define AUDIGY_DMA_MASK		0xffffffffUL	/* 32bit */
+
+#define TMEMSIZE        256*1024
+#define TMEMSIZEREG     4
+
+#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
+
+// Audigy specify registers are prefixed with 'A_'
+
+/************************************************************************************************/
+/* PCI function 0 registers, address = <val> + PCIBASE0						*/
+/************************************************************************************************/
+
+#define PTR			0x00		/* Indexed register set pointer register	*/
+						/* NOTE: The CHANNELNUM and ADDRESS words can	*/
+						/* be modified independently of each other.	*/
+#define PTR_CHANNELNUM_MASK	0x0000003f	/* For each per-channel register, indicates the	*/
+						/* channel number of the register to be		*/
+						/* accessed.  For non per-channel registers the	*/
+						/* value should be set to zero.			*/
+#define PTR_ADDRESS_MASK	0x07ff0000	/* Register index				*/
+#define A_PTR_ADDRESS_MASK	0x0fff0000
+
+#define DATA			0x04		/* Indexed register set data register		*/
+
+#define IPR			0x08		/* Global interrupt pending register		*/
+						/* Clear pending interrupts by writing a 1 to	*/
+						/* the relevant bits and zero to the other bits	*/
+
+#define IPR_GPIOMSG		0x20000000	/* GPIO message interrupt (RE'd, still not sure 
+						   which INTE bits enable it)			*/
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1)			*/
+#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000	/* MIDI UART transmit buffer empty		*/
+#define IPR_A_MIDIRECVBUFEMPTY2	0x08000000	/* MIDI UART receive buffer empty		*/
+
+#define IPR_SPDIFBUFFULL	0x04000000	/* SPDIF capture related, 10k2 only? (RE)	*/
+#define IPR_SPDIFBUFHALFFULL	0x02000000	/* SPDIF capture related? (RE)			*/
+
+#define IPR_SAMPLERATETRACKER	0x01000000	/* Sample rate tracker lock status change	*/
+#define IPR_FXDSP		0x00800000	/* Enable FX DSP interrupts			*/
+#define IPR_FORCEINT		0x00400000	/* Force Sound Blaster interrupt		*/
+#define IPR_PCIERROR		0x00200000	/* PCI bus error				*/
+#define IPR_VOLINCR		0x00100000	/* Volume increment button pressed		*/
+#define IPR_VOLDECR		0x00080000	/* Volume decrement button pressed		*/
+#define IPR_MUTE		0x00040000	/* Mute button pressed				*/
+#define IPR_MICBUFFULL		0x00020000	/* Microphone buffer full			*/
+#define IPR_MICBUFHALFFULL	0x00010000	/* Microphone buffer half full			*/
+#define IPR_ADCBUFFULL		0x00008000	/* ADC buffer full				*/
+#define IPR_ADCBUFHALFFULL	0x00004000	/* ADC buffer half full				*/
+#define IPR_EFXBUFFULL		0x00002000	/* Effects buffer full				*/
+#define IPR_EFXBUFHALFFULL	0x00001000	/* Effects buffer half full			*/
+#define IPR_GPSPDIFSTATUSCHANGE	0x00000800	/* GPSPDIF channel status change		*/
+#define IPR_CDROMSTATUSCHANGE	0x00000400	/* CD-ROM channel status change			*/
+#define IPR_INTERVALTIMER	0x00000200	/* Interval timer terminal count		*/
+#define IPR_MIDITRANSBUFEMPTY	0x00000100	/* MIDI UART transmit buffer empty		*/
+#define IPR_MIDIRECVBUFEMPTY	0x00000080	/* MIDI UART receive buffer empty		*/
+#define IPR_CHANNELLOOP		0x00000040	/* Channel (half) loop interrupt(s) pending	*/
+#define IPR_CHANNELNUMBERMASK	0x0000003f	/* When IPR_CHANNELLOOP is set, indicates the	*/
+						/* highest set channel in CLIPL, CLIPH, HLIPL,  */
+						/* or HLIPH.  When IP is written with CL set,	*/
+						/* the bit in H/CLIPL or H/CLIPH corresponding	*/
+						/* to the CIN value written will be cleared.	*/
+
+#define INTE			0x0c		/* Interrupt enable register			*/
+#define INTE_VIRTUALSB_MASK	0xc0000000	/* Virtual Soundblaster I/O port capture	*/
+#define INTE_VIRTUALSB_220	0x00000000	/* Capture at I/O base address 0x220-0x22f	*/
+#define INTE_VIRTUALSB_240	0x40000000	/* Capture at I/O base address 0x240		*/
+#define INTE_VIRTUALSB_260	0x80000000	/* Capture at I/O base address 0x260		*/
+#define INTE_VIRTUALSB_280	0xc0000000	/* Capture at I/O base address 0x280		*/
+#define INTE_VIRTUALMPU_MASK	0x30000000	/* Virtual MPU I/O port capture			*/
+#define INTE_VIRTUALMPU_300	0x00000000	/* Capture at I/O base address 0x300-0x301	*/
+#define INTE_VIRTUALMPU_310	0x10000000	/* Capture at I/O base address 0x310		*/
+#define INTE_VIRTUALMPU_320	0x20000000	/* Capture at I/O base address 0x320		*/
+#define INTE_VIRTUALMPU_330	0x30000000	/* Capture at I/O base address 0x330		*/
+#define INTE_MASTERDMAENABLE	0x08000000	/* Master DMA emulation at 0x000-0x00f		*/
+#define INTE_SLAVEDMAENABLE	0x04000000	/* Slave DMA emulation at 0x0c0-0x0df		*/
+#define INTE_MASTERPICENABLE	0x02000000	/* Master PIC emulation at 0x020-0x021		*/
+#define INTE_SLAVEPICENABLE	0x01000000	/* Slave PIC emulation at 0x0a0-0x0a1		*/
+#define INTE_VSBENABLE		0x00800000	/* Enable virtual Soundblaster			*/
+#define INTE_ADLIBENABLE	0x00400000	/* Enable AdLib emulation at 0x388-0x38b	*/
+#define INTE_MPUENABLE		0x00200000	/* Enable virtual MPU				*/
+#define INTE_FORCEINT		0x00100000	/* Continuously assert INTAN			*/
+
+#define INTE_MRHANDENABLE	0x00080000	/* Enable the "Mr. Hand" logic			*/
+						/* NOTE: There is no reason to use this under	*/
+						/* Linux, and it will cause odd hardware 	*/
+						/* behavior and possibly random segfaults and	*/
+						/* lockups if enabled.				*/
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1)			*/
+#define INTE_A_MIDITXENABLE2	0x00020000	/* Enable MIDI transmit-buffer-empty interrupts	*/
+#define INTE_A_MIDIRXENABLE2	0x00010000	/* Enable MIDI receive-buffer-empty interrupts	*/
+
+
+#define INTE_SAMPLERATETRACKER	0x00002000	/* Enable sample rate tracker interrupts	*/
+						/* NOTE: This bit must always be enabled       	*/
+#define INTE_FXDSPENABLE	0x00001000	/* Enable FX DSP interrupts			*/
+#define INTE_PCIERRORENABLE	0x00000800	/* Enable PCI bus error interrupts		*/
+#define INTE_VOLINCRENABLE	0x00000400	/* Enable volume increment button interrupts	*/
+#define INTE_VOLDECRENABLE	0x00000200	/* Enable volume decrement button interrupts	*/
+#define INTE_MUTEENABLE		0x00000100	/* Enable mute button interrupts		*/
+#define INTE_MICBUFENABLE	0x00000080	/* Enable microphone buffer interrupts		*/
+#define INTE_ADCBUFENABLE	0x00000040	/* Enable ADC buffer interrupts			*/
+#define INTE_EFXBUFENABLE	0x00000020	/* Enable Effects buffer interrupts		*/
+#define INTE_GPSPDIFENABLE	0x00000010	/* Enable GPSPDIF status interrupts		*/
+#define INTE_CDSPDIFENABLE	0x00000008	/* Enable CDSPDIF status interrupts		*/
+#define INTE_INTERVALTIMERENB	0x00000004	/* Enable interval timer interrupts		*/
+#define INTE_MIDITXENABLE	0x00000002	/* Enable MIDI transmit-buffer-empty interrupts	*/
+#define INTE_MIDIRXENABLE	0x00000001	/* Enable MIDI receive-buffer-empty interrupts	*/
+
+#define WC			0x10		/* Wall Clock register				*/
+#define WC_SAMPLECOUNTER_MASK	0x03FFFFC0	/* Sample periods elapsed since reset		*/
+#define WC_SAMPLECOUNTER	0x14060010
+#define WC_CURRENTCHANNEL	0x0000003F	/* Channel [0..63] currently being serviced	*/
+						/* NOTE: Each channel takes 1/64th of a sample	*/
+						/* period to be serviced.			*/
+
+#define HCFG			0x14		/* Hardware config register			*/
+						/* NOTE: There is no reason to use the legacy	*/
+						/* SoundBlaster emulation stuff described below	*/
+						/* under Linux, and all kinds of weird hardware	*/
+						/* behavior can result if you try.  Don't.	*/
+#define HCFG_LEGACYFUNC_MASK	0xe0000000	/* Legacy function number 			*/
+#define HCFG_LEGACYFUNC_MPU	0x00000000	/* Legacy MPU	 				*/
+#define HCFG_LEGACYFUNC_SB	0x40000000	/* Legacy SB					*/
+#define HCFG_LEGACYFUNC_AD	0x60000000	/* Legacy AD					*/
+#define HCFG_LEGACYFUNC_MPIC	0x80000000	/* Legacy MPIC					*/
+#define HCFG_LEGACYFUNC_MDMA	0xa0000000	/* Legacy MDMA					*/
+#define HCFG_LEGACYFUNC_SPCI	0xc0000000	/* Legacy SPCI					*/
+#define HCFG_LEGACYFUNC_SDMA	0xe0000000	/* Legacy SDMA					*/
+#define HCFG_IOCAPTUREADDR	0x1f000000	/* The 4 LSBs of the captured I/O address.	*/
+#define HCFG_LEGACYWRITE	0x00800000	/* 1 = write, 0 = read 				*/
+#define HCFG_LEGACYWORD		0x00400000	/* 1 = word, 0 = byte 				*/
+#define HCFG_LEGACYINT		0x00200000	/* 1 = legacy event captured. Write 1 to clear.	*/
+						/* NOTE: The rest of the bits in this register	*/
+						/* _are_ relevant under Linux.			*/
+#define HCFG_CODECFORMAT_MASK	0x00070000	/* CODEC format					*/
+#define HCFG_CODECFORMAT_AC97	0x00000000	/* AC97 CODEC format -- Primary Output		*/
+#define HCFG_CODECFORMAT_I2S	0x00010000	/* I2S CODEC format -- Secondary (Rear) Output	*/
+#define HCFG_GPINPUT0		0x00004000	/* External pin112				*/
+#define HCFG_GPINPUT1		0x00002000	/* External pin110				*/
+#define HCFG_GPOUTPUT_MASK	0x00001c00	/* External pins which may be controlled	*/
+#define HCFG_GPOUT0		0x00001000	/* External pin? (spdif enable on 5.1)		*/
+#define HCFG_GPOUT1		0x00000800	/* External pin? (IR)				*/
+#define HCFG_GPOUT2		0x00000400	/* External pin? (IR)				*/
+#define HCFG_JOYENABLE      	0x00000200	/* Internal joystick enable    			*/
+#define HCFG_PHASETRACKENABLE	0x00000100	/* Phase tracking enable			*/
+						/* 1 = Force all 3 async digital inputs to use	*/
+						/* the same async sample rate tracker (ZVIDEO)	*/
+#define HCFG_AC3ENABLE_MASK	0x000000e0	/* AC3 async input control - Not implemented	*/
+#define HCFG_AC3ENABLE_ZVIDEO	0x00000080	/* Channels 0 and 1 replace ZVIDEO		*/
+#define HCFG_AC3ENABLE_CDSPDIF	0x00000040	/* Channels 0 and 1 replace CDSPDIF		*/
+#define HCFG_AC3ENABLE_GPSPDIF  0x00000020      /* Channels 0 and 1 replace GPSPDIF             */
+#define HCFG_AUTOMUTE		0x00000010	/* When set, the async sample rate convertors	*/
+						/* will automatically mute their output when	*/
+						/* they are not rate-locked to the external	*/
+						/* async audio source  				*/
+#define HCFG_LOCKSOUNDCACHE	0x00000008	/* 1 = Cancel bustmaster accesses to soundcache */
+						/* NOTE: This should generally never be used.  	*/
+#define HCFG_LOCKTANKCACHE_MASK	0x00000004	/* 1 = Cancel bustmaster accesses to tankcache	*/
+						/* NOTE: This should generally never be used.  	*/
+#define HCFG_LOCKTANKCACHE	0x01020014
+#define HCFG_MUTEBUTTONENABLE	0x00000002	/* 1 = Master mute button sets AUDIOENABLE = 0.	*/
+						/* NOTE: This is a 'cheap' way to implement a	*/
+						/* master mute function on the mute button, and	*/
+						/* in general should not be used unless a more	*/
+						/* sophisticated master mute function has not	*/
+						/* been written.       				*/
+#define HCFG_AUDIOENABLE	0x00000001	/* 0 = CODECs transmit zero-valued samples	*/
+						/* Should be set to 1 when the EMU10K1 is	*/
+						/* completely initialized.			*/
+
+//For Audigy, MPU port move to 0x70-0x74 ptr register
+
+#define MUDATA			0x18		/* MPU401 data register (8 bits)       		*/
+
+#define MUCMD			0x19		/* MPU401 command register (8 bits)    		*/
+#define MUCMD_RESET		0xff		/* RESET command				*/
+#define MUCMD_ENTERUARTMODE	0x3f		/* Enter_UART_mode command			*/
+						/* NOTE: All other commands are ignored		*/
+
+#define MUSTAT			MUCMD		/* MPU401 status register (8 bits)     		*/
+#define MUSTAT_IRDYN		0x80		/* 0 = MIDI data or command ACK			*/
+#define MUSTAT_ORDYN		0x40		/* 0 = MUDATA can accept a command or data	*/
+
+#define A_IOCFG			0x18		/* GPIO on Audigy card (16bits)			*/
+#define A_GPINPUT_MASK		0xff00
+#define A_GPOUTPUT_MASK		0x00ff
+
+// Audigy output/GPIO stuff taken from the kX drivers
+#define A_IOCFG_GPOUT0		0x0044		/* analog/digital				*/
+#define A_IOCFG_DISABLE_ANALOG	0x0040		/* = 'enable' for Audigy2 (chiprev=4)		*/
+#define A_IOCFG_ENABLE_DIGITAL	0x0004
+#define A_IOCFG_UNKNOWN_20      0x0020
+#define A_IOCFG_DISABLE_AC97_FRONT      0x0080  /* turn off ac97 front -> front (10k2.1)	*/
+#define A_IOCFG_GPOUT1		0x0002		/* IR? drive's internal bypass (?)		*/
+#define A_IOCFG_GPOUT2		0x0001		/* IR */
+#define A_IOCFG_MULTIPURPOSE_JACK	0x2000  /* center+lfe+rear_center (a2/a2ex)		*/
+                                                /* + digital for generic 10k2			*/
+#define A_IOCFG_DIGITAL_JACK    0x1000          /* digital for a2 platinum			*/
+#define A_IOCFG_FRONT_JACK      0x4000
+#define A_IOCFG_REAR_JACK       0x8000
+#define A_IOCFG_PHONES_JACK     0x0100          /* LiveDrive					*/
+
+/* outputs:
+ *	for audigy2 platinum:	0xa00
+ *	for a2 platinum ex:	0x1c00
+ *	for a1 platinum:	0x0
+ */
+
+#define TIMER			0x1a		/* Timer terminal count register		*/
+						/* NOTE: After the rate is changed, a maximum	*/
+						/* of 1024 sample periods should be allowed	*/
+						/* before the new rate is guaranteed accurate.	*/
+#define TIMER_RATE_MASK		0x000003ff	/* Timer interrupt rate in sample periods	*/
+						/* 0 == 1024 periods, [1..4] are not useful	*/
+#define TIMER_RATE		0x0a00001a
+
+#define AC97DATA		0x1c		/* AC97 register set data register (16 bit)	*/
+
+#define AC97ADDRESS		0x1e		/* AC97 register set address register (8 bit)	*/
+#define AC97ADDRESS_READY	0x80		/* Read-only bit, reflects CODEC READY signal	*/
+#define AC97ADDRESS_ADDRESS	0x7f		/* Address of indexed AC97 register		*/
+
+/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
+#define PTR2			0x20		/* Indexed register set pointer register	*/
+#define DATA2			0x24		/* Indexed register set data register		*/
+#define IPR2			0x28		/* P16V interrupt pending register		*/
+#define IPR2_PLAYBACK_CH_0_LOOP      0x00001000 /* Playback Channel 0 loop                               */
+#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop                          */
+#define IPR2_CAPTURE_CH_0_LOOP       0x00100000 /* Capture Channel 0 loop                               */
+#define IPR2_CAPTURE_CH_0_HALF_LOOP  0x00010000 /* Capture Channel 0 half loop                          */
+						/* 0x00000100 Playback. Only in once per period.
+						 * 0x00110000 Capture. Int on half buffer.
+						 */
+#define INTE2			0x2c		/* P16V Interrupt enable register. 	*/
+#define INTE2_PLAYBACK_CH_0_LOOP      0x00001000 /* Playback Channel 0 loop                               */
+#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop                          */
+#define INTE2_PLAYBACK_CH_1_LOOP      0x00002000 /* Playback Channel 1 loop                               */
+#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop                          */
+#define INTE2_PLAYBACK_CH_2_LOOP      0x00004000 /* Playback Channel 2 loop                               */
+#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop                          */
+#define INTE2_PLAYBACK_CH_3_LOOP      0x00008000 /* Playback Channel 3 loop                               */
+#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop                          */
+#define INTE2_CAPTURE_CH_0_LOOP       0x00100000 /* Capture Channel 0 loop                               */
+#define INTE2_CAPTURE_CH_0_HALF_LOOP  0x00010000 /* Caputre Channel 0 half loop                          */
+#define HCFG2			0x34		/* Defaults: 0, win2000 sets it to 00004201 */
+						/* 0x00000000 2-channel output. */
+						/* 0x00000200 8-channel output. */
+						/* 0x00000004 pauses stream/irq fail. */
+						/* Rest of bits no nothing to sound output */
+						/* bit 0: Enable P16V audio.
+						 * bit 1: Lock P16V record memory cache.
+						 * bit 2: Lock P16V playback memory cache.
+						 * bit 3: Dummy record insert zero samples.
+						 * bit 8: Record 8-channel in phase.
+						 * bit 9: Playback 8-channel in phase.
+						 * bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute.
+						 * bit 13: Playback mixer enable.
+						 * bit 14: Route SRC48 mixer output to fx engine.
+						 * bit 15: Enable IEEE 1394 chip.
+						 */
+#define IPR3			0x38		/* Cdif interrupt pending register		*/
+#define INTE3			0x3c		/* Cdif interrupt enable register. 	*/
+/************************************************************************************************/
+/* PCI function 1 registers, address = <val> + PCIBASE1						*/
+/************************************************************************************************/
+
+#define JOYSTICK1		0x00		/* Analog joystick port register		*/
+#define JOYSTICK2		0x01		/* Analog joystick port register		*/
+#define JOYSTICK3		0x02		/* Analog joystick port register		*/
+#define JOYSTICK4		0x03		/* Analog joystick port register		*/
+#define JOYSTICK5		0x04		/* Analog joystick port register		*/
+#define JOYSTICK6		0x05		/* Analog joystick port register		*/
+#define JOYSTICK7		0x06		/* Analog joystick port register		*/
+#define JOYSTICK8		0x07		/* Analog joystick port register		*/
+
+/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write.	*/
+/* When reading, use these bitfields: */
+#define JOYSTICK_BUTTONS	0x0f		/* Joystick button data				*/
+#define JOYSTICK_COMPARATOR	0xf0		/* Joystick comparator data			*/
+
+
+/********************************************************************************************************/
+/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers			*/
+/********************************************************************************************************/
+
+#define CPF			0x00		/* Current pitch and fraction register			*/
+#define CPF_CURRENTPITCH_MASK	0xffff0000	/* Current pitch (linear, 0x4000 == unity pitch shift) 	*/
+#define CPF_CURRENTPITCH	0x10100000
+#define CPF_STEREO_MASK		0x00008000	/* 1 = Even channel interleave, odd channel locked	*/
+#define CPF_STOP_MASK		0x00004000	/* 1 = Current pitch forced to 0			*/
+#define CPF_FRACADDRESS_MASK	0x00003fff	/* Linear fractional address of the current channel	*/
+
+#define PTRX			0x01		/* Pitch target and send A/B amounts register		*/
+#define PTRX_PITCHTARGET_MASK	0xffff0000	/* Pitch target of specified channel			*/
+#define PTRX_PITCHTARGET	0x10100001
+#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00	/* Linear level of channel output sent to FX send bus A	*/
+#define PTRX_FXSENDAMOUNT_A	0x08080001
+#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff	/* Linear level of channel output sent to FX send bus B	*/
+#define PTRX_FXSENDAMOUNT_B	0x08000001
+
+#define CVCF			0x02		/* Current volume and filter cutoff register		*/
+#define CVCF_CURRENTVOL_MASK	0xffff0000	/* Current linear volume of specified channel		*/
+#define CVCF_CURRENTVOL		0x10100002
+#define CVCF_CURRENTFILTER_MASK	0x0000ffff	/* Current filter cutoff frequency of specified channel	*/
+#define CVCF_CURRENTFILTER	0x10000002
+
+#define VTFT			0x03		/* Volume target and filter cutoff target register	*/
+#define VTFT_VOLUMETARGET_MASK	0xffff0000	/* Volume target of specified channel			*/
+#define VTFT_VOLUMETARGET	0x10100003
+#define VTFT_FILTERTARGET_MASK	0x0000ffff	/* Filter cutoff target of specified channel		*/
+#define VTFT_FILTERTARGET	0x10000003
+
+#define Z1			0x05		/* Filter delay memory 1 register			*/
+
+#define Z2			0x04		/* Filter delay memory 2 register			*/
+
+#define PSST			0x06		/* Send C amount and loop start address register	*/
+#define PSST_FXSENDAMOUNT_C_MASK 0xff000000	/* Linear level of channel output sent to FX send bus C	*/
+
+#define PSST_FXSENDAMOUNT_C	0x08180006
+
+#define PSST_LOOPSTARTADDR_MASK	0x00ffffff	/* Loop start address of the specified channel		*/
+#define PSST_LOOPSTARTADDR	0x18000006
+
+#define DSL			0x07		/* Send D amount and loop start address register	*/
+#define DSL_FXSENDAMOUNT_D_MASK	0xff000000	/* Linear level of channel output sent to FX send bus D	*/
+
+#define DSL_FXSENDAMOUNT_D	0x08180007
+
+#define DSL_LOOPENDADDR_MASK	0x00ffffff	/* Loop end address of the specified channel		*/
+#define DSL_LOOPENDADDR		0x18000007
+
+#define CCCA			0x08		/* Filter Q, interp. ROM, byte size, cur. addr register */
+#define CCCA_RESONANCE		0xf0000000	/* Lowpass filter resonance (Q) height			*/
+#define CCCA_INTERPROMMASK	0x0e000000	/* Selects passband of interpolation ROM		*/
+						/* 1 == full band, 7 == lowpass				*/
+						/* ROM 0 is used when pitch shifting downward or less	*/
+						/* then 3 semitones upward.  Increasingly higher ROM	*/
+						/* numbers are used, typically in steps of 3 semitones,	*/
+						/* as upward pitch shifting is performed.		*/
+#define CCCA_INTERPROM_0	0x00000000	/* Select interpolation ROM 0				*/
+#define CCCA_INTERPROM_1	0x02000000	/* Select interpolation ROM 1				*/
+#define CCCA_INTERPROM_2	0x04000000	/* Select interpolation ROM 2				*/
+#define CCCA_INTERPROM_3	0x06000000	/* Select interpolation ROM 3				*/
+#define CCCA_INTERPROM_4	0x08000000	/* Select interpolation ROM 4				*/
+#define CCCA_INTERPROM_5	0x0a000000	/* Select interpolation ROM 5				*/
+#define CCCA_INTERPROM_6	0x0c000000	/* Select interpolation ROM 6				*/
+#define CCCA_INTERPROM_7	0x0e000000	/* Select interpolation ROM 7				*/
+#define CCCA_8BITSELECT		0x01000000	/* 1 = Sound memory for this channel uses 8-bit samples	*/
+#define CCCA_CURRADDR_MASK	0x00ffffff	/* Current address of the selected channel		*/
+#define CCCA_CURRADDR		0x18000008
+
+#define CCR			0x09		/* Cache control register				*/
+#define CCR_CACHEINVALIDSIZE	0x07190009
+#define CCR_CACHEINVALIDSIZE_MASK	0xfe000000	/* Number of invalid samples cache for this channel    	*/
+#define CCR_CACHELOOPFLAG	0x01000000	/* 1 = Cache has a loop service pending			*/
+#define CCR_INTERLEAVEDSAMPLES	0x00800000	/* 1 = A cache service will fetch interleaved samples	*/
+#define CCR_WORDSIZEDSAMPLES	0x00400000	/* 1 = A cache service will fetch word sized samples	*/
+#define CCR_READADDRESS		0x06100009
+#define CCR_READADDRESS_MASK	0x003f0000	/* Location of cache just beyond current cache service	*/
+#define CCR_LOOPINVALSIZE	0x0000fe00	/* Number of invalid samples in cache prior to loop	*/
+						/* NOTE: This is valid only if CACHELOOPFLAG is set	*/
+#define CCR_LOOPFLAG		0x00000100	/* Set for a single sample period when a loop occurs	*/
+#define CCR_CACHELOOPADDRHI	0x000000ff	/* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set	*/
+
+#define CLP			0x0a		/* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
+						/* NOTE: This register is normally not used		*/
+#define CLP_CACHELOOPADDR	0x0000ffff	/* Cache loop address (DSL_LOOPSTARTADDR [0..15])	*/
+
+#define FXRT			0x0b		/* Effects send routing register			*/
+						/* NOTE: It is illegal to assign the same routing to	*/
+						/* two effects sends.					*/
+#define FXRT_CHANNELA		0x000f0000	/* Effects send bus number for channel's effects send A	*/
+#define FXRT_CHANNELB		0x00f00000	/* Effects send bus number for channel's effects send B	*/
+#define FXRT_CHANNELC		0x0f000000	/* Effects send bus number for channel's effects send C	*/
+#define FXRT_CHANNELD		0xf0000000	/* Effects send bus number for channel's effects send D	*/
+
+#define MAPA			0x0c		/* Cache map A						*/
+
+#define MAPB			0x0d		/* Cache map B						*/
+
+#define MAP_PTE_MASK		0xffffe000	/* The 19 MSBs of the PTE indexed by the PTI		*/
+#define MAP_PTI_MASK		0x00001fff	/* The 13 bit index to one of the 8192 PTE dwords      	*/
+
+#define ENVVOL			0x10		/* Volume envelope register				*/
+#define ENVVOL_MASK		0x0000ffff	/* Current value of volume envelope state variable	*/  
+						/* 0x8000-n == 666*n usec delay	       			*/
+
+#define ATKHLDV 		0x11		/* Volume envelope hold and attack register		*/
+#define ATKHLDV_PHASE0		0x00008000	/* 0 = Begin attack phase				*/
+#define ATKHLDV_HOLDTIME_MASK	0x00007f00	/* Envelope hold time (127-n == n*88.2msec)		*/
+#define ATKHLDV_ATTACKTIME_MASK	0x0000007f	/* Envelope attack time, log encoded			*/
+						/* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec	*/
+
+#define DCYSUSV 		0x12		/* Volume envelope sustain and decay register		*/
+#define DCYSUSV_PHASE1_MASK	0x00008000	/* 0 = Begin attack phase, 1 = begin release phase	*/
+#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00	/* 127 = full, 0 = off, 0.75dB increments		*/
+#define DCYSUSV_CHANNELENABLE_MASK 0x00000080	/* 1 = Inhibit envelope engine from writing values in	*/
+						/* this channel and from writing to pitch, filter and	*/
+						/* volume targets.					*/
+#define DCYSUSV_DECAYTIME_MASK	0x0000007f	/* Volume envelope decay time, log encoded     		*/
+						/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec		*/
+
+#define LFOVAL1 		0x13		/* Modulation LFO value					*/
+#define LFOVAL_MASK		0x0000ffff	/* Current value of modulation LFO state variable	*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define ENVVAL			0x14		/* Modulation envelope register				*/
+#define ENVVAL_MASK		0x0000ffff	/* Current value of modulation envelope state variable 	*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define ATKHLDM			0x15		/* Modulation envelope hold and attack register		*/
+#define ATKHLDM_PHASE0		0x00008000	/* 0 = Begin attack phase				*/
+#define ATKHLDM_HOLDTIME	0x00007f00	/* Envelope hold time (127-n == n*42msec)		*/
+#define ATKHLDM_ATTACKTIME	0x0000007f	/* Envelope attack time, log encoded			*/
+						/* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec		*/
+
+#define DCYSUSM			0x16		/* Modulation envelope decay and sustain register	*/
+#define DCYSUSM_PHASE1_MASK	0x00008000	/* 0 = Begin attack phase, 1 = begin release phase	*/
+#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00	/* 127 = full, 0 = off, 0.75dB increments		*/
+#define DCYSUSM_DECAYTIME_MASK	0x0000007f	/* Envelope decay time, log encoded			*/
+						/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec		*/
+
+#define LFOVAL2 		0x17		/* Vibrato LFO register					*/
+#define LFOVAL2_MASK		0x0000ffff	/* Current value of vibrato LFO state variable 		*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define IP			0x18		/* Initial pitch register				*/
+#define IP_MASK			0x0000ffff	/* Exponential initial pitch shift			*/
+						/* 4 bits of octave, 12 bits of fractional octave	*/
+#define IP_UNITY		0x0000e000	/* Unity pitch shift					*/
+
+#define IFATN			0x19		/* Initial filter cutoff and attenuation register	*/
+#define IFATN_FILTERCUTOFF_MASK	0x0000ff00	/* Initial filter cutoff frequency in exponential units	*/
+						/* 6 most significant bits are semitones		*/
+						/* 2 least significant bits are fractions		*/
+#define IFATN_FILTERCUTOFF	0x08080019
+#define IFATN_ATTENUATION_MASK	0x000000ff	/* Initial attenuation in 0.375dB steps			*/
+#define IFATN_ATTENUATION	0x08000019
+
+
+#define PEFE			0x1a		/* Pitch envelope and filter envelope amount register	*/
+#define PEFE_PITCHAMOUNT_MASK	0x0000ff00	/* Pitch envlope amount					*/
+						/* Signed 2's complement, +/- one octave peak extremes	*/
+#define PEFE_PITCHAMOUNT	0x0808001a
+#define PEFE_FILTERAMOUNT_MASK	0x000000ff	/* Filter envlope amount				*/
+						/* Signed 2's complement, +/- six octaves peak extremes */
+#define PEFE_FILTERAMOUNT	0x0800001a
+#define FMMOD			0x1b		/* Vibrato/filter modulation from LFO register		*/
+#define FMMOD_MODVIBRATO	0x0000ff00	/* Vibrato LFO modulation depth				*/
+						/* Signed 2's complement, +/- one octave extremes	*/
+#define FMMOD_MOFILTER		0x000000ff	/* Filter LFO modulation depth				*/
+						/* Signed 2's complement, +/- three octave extremes	*/
+
+
+#define TREMFRQ 		0x1c		/* Tremolo amount and modulation LFO frequency register	*/
+#define TREMFRQ_DEPTH		0x0000ff00	/* Tremolo depth					*/
+						/* Signed 2's complement, with +/- 12dB extremes	*/
+
+#define TREMFRQ_FREQUENCY	0x000000ff	/* Tremolo LFO frequency				*/
+						/* ??Hz steps, maximum of ?? Hz.			*/
+#define FM2FRQ2 		0x1d		/* Vibrato amount and vibrato LFO frequency register	*/
+#define FM2FRQ2_DEPTH		0x0000ff00	/* Vibrato LFO vibrato depth				*/
+						/* Signed 2's complement, +/- one octave extremes	*/
+#define FM2FRQ2_FREQUENCY	0x000000ff	/* Vibrato LFO frequency				*/
+						/* 0.039Hz steps, maximum of 9.85 Hz.			*/
+
+#define TEMPENV 		0x1e		/* Tempory envelope register				*/
+#define TEMPENV_MASK		0x0000ffff	/* 16-bit value						*/
+						/* NOTE: All channels contain internal variables; do	*/
+						/* not write to these locations.			*/
+
+/* 1f something */
+
+#define CD0			0x20		/* Cache data 0 register				*/
+#define CD1			0x21		/* Cache data 1 register				*/
+#define CD2			0x22		/* Cache data 2 register				*/
+#define CD3			0x23		/* Cache data 3 register				*/
+#define CD4			0x24		/* Cache data 4 register				*/
+#define CD5			0x25		/* Cache data 5 register				*/
+#define CD6			0x26		/* Cache data 6 register				*/
+#define CD7			0x27		/* Cache data 7 register				*/
+#define CD8			0x28		/* Cache data 8 register				*/
+#define CD9			0x29		/* Cache data 9 register				*/
+#define CDA			0x2a		/* Cache data A register				*/
+#define CDB			0x2b		/* Cache data B register				*/
+#define CDC			0x2c		/* Cache data C register				*/
+#define CDD			0x2d		/* Cache data D register				*/
+#define CDE			0x2e		/* Cache data E register				*/
+#define CDF			0x2f		/* Cache data F register				*/
+
+/* 0x30-3f seem to be the same as 0x20-2f */
+
+#define PTB			0x40		/* Page table base register				*/
+#define PTB_MASK		0xfffff000	/* Physical address of the page table in host memory	*/
+
+#define TCB			0x41		/* Tank cache base register    				*/
+#define TCB_MASK		0xfffff000	/* Physical address of the bottom of host based TRAM	*/
+
+#define ADCCR			0x42		/* ADC sample rate/stereo control register		*/
+#define ADCCR_RCHANENABLE	0x00000010	/* Enables right channel for writing to the host       	*/
+#define ADCCR_LCHANENABLE	0x00000008	/* Enables left channel for writing to the host		*/
+						/* NOTE: To guarantee phase coherency, both channels	*/
+						/* must be disabled prior to enabling both channels.	*/
+#define A_ADCCR_RCHANENABLE	0x00000020
+#define A_ADCCR_LCHANENABLE	0x00000010
+
+#define A_ADCCR_SAMPLERATE_MASK 0x0000000F      /* Audigy sample rate convertor output rate		*/
+#define ADCCR_SAMPLERATE_MASK	0x00000007	/* Sample rate convertor output rate			*/
+#define ADCCR_SAMPLERATE_48	0x00000000	/* 48kHz sample rate					*/
+#define ADCCR_SAMPLERATE_44	0x00000001	/* 44.1kHz sample rate					*/
+#define ADCCR_SAMPLERATE_32	0x00000002	/* 32kHz sample rate					*/
+#define ADCCR_SAMPLERATE_24	0x00000003	/* 24kHz sample rate					*/
+#define ADCCR_SAMPLERATE_22	0x00000004	/* 22.05kHz sample rate					*/
+#define ADCCR_SAMPLERATE_16	0x00000005	/* 16kHz sample rate					*/
+#define ADCCR_SAMPLERATE_11	0x00000006	/* 11.025kHz sample rate				*/
+#define ADCCR_SAMPLERATE_8	0x00000007	/* 8kHz sample rate					*/
+#define A_ADCCR_SAMPLERATE_12	0x00000006	/* 12kHz sample rate					*/
+#define A_ADCCR_SAMPLERATE_11	0x00000007	/* 11.025kHz sample rate				*/
+#define A_ADCCR_SAMPLERATE_8	0x00000008	/* 8kHz sample rate					*/
+
+#define FXWC			0x43		/* FX output write channels register			*/
+						/* When set, each bit enables the writing of the	*/
+						/* corresponding FX output channel (internal registers  */
+						/* 0x20-0x3f) to host memory.  This mode of recording   */
+						/* is 16bit, 48KHz only. All 32 channels can be enabled */
+						/* simultaneously.					*/
+
+#define FXWC_DEFAULTROUTE_C     (1<<0)		/* left emu out? */
+#define FXWC_DEFAULTROUTE_B     (1<<1)		/* right emu out? */
+#define FXWC_DEFAULTROUTE_A     (1<<12)
+#define FXWC_DEFAULTROUTE_D     (1<<13)
+#define FXWC_ADCLEFT            (1<<18)
+#define FXWC_CDROMSPDIFLEFT     (1<<18)
+#define FXWC_ADCRIGHT           (1<<19)
+#define FXWC_CDROMSPDIFRIGHT    (1<<19)
+#define FXWC_MIC                (1<<20)
+#define FXWC_ZOOMLEFT           (1<<20)
+#define FXWC_ZOOMRIGHT          (1<<21)
+#define FXWC_SPDIFLEFT          (1<<22)		/* 0x00400000 */
+#define FXWC_SPDIFRIGHT         (1<<23)		/* 0x00800000 */
+
+#define TCBS			0x44		/* Tank cache buffer size register			*/
+#define TCBS_MASK		0x00000007	/* Tank cache buffer size field				*/
+#define TCBS_BUFFSIZE_16K	0x00000000
+#define TCBS_BUFFSIZE_32K	0x00000001
+#define TCBS_BUFFSIZE_64K	0x00000002
+#define TCBS_BUFFSIZE_128K	0x00000003
+#define TCBS_BUFFSIZE_256K	0x00000004
+#define TCBS_BUFFSIZE_512K	0x00000005
+#define TCBS_BUFFSIZE_1024K	0x00000006
+#define TCBS_BUFFSIZE_2048K	0x00000007
+
+#define MICBA			0x45		/* AC97 microphone buffer address register		*/
+#define MICBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+#define ADCBA			0x46		/* ADC buffer address register				*/
+#define ADCBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+#define FXBA			0x47		/* FX Buffer Address */
+#define FXBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+/* 0x48 something - word access, defaults to 3f */
+
+#define MICBS			0x49		/* Microphone buffer size register			*/
+
+#define ADCBS			0x4a		/* ADC buffer size register				*/
+
+#define FXBS			0x4b		/* FX buffer size register				*/
+
+/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
+
+/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
+#define ADCBS_BUFSIZE_NONE	0x00000000
+#define ADCBS_BUFSIZE_384	0x00000001
+#define ADCBS_BUFSIZE_448	0x00000002
+#define ADCBS_BUFSIZE_512	0x00000003
+#define ADCBS_BUFSIZE_640	0x00000004
+#define ADCBS_BUFSIZE_768	0x00000005
+#define ADCBS_BUFSIZE_896	0x00000006
+#define ADCBS_BUFSIZE_1024	0x00000007
+#define ADCBS_BUFSIZE_1280	0x00000008
+#define ADCBS_BUFSIZE_1536	0x00000009
+#define ADCBS_BUFSIZE_1792	0x0000000a
+#define ADCBS_BUFSIZE_2048	0x0000000b
+#define ADCBS_BUFSIZE_2560	0x0000000c
+#define ADCBS_BUFSIZE_3072	0x0000000d
+#define ADCBS_BUFSIZE_3584	0x0000000e
+#define ADCBS_BUFSIZE_4096	0x0000000f
+#define ADCBS_BUFSIZE_5120	0x00000010
+#define ADCBS_BUFSIZE_6144	0x00000011
+#define ADCBS_BUFSIZE_7168	0x00000012
+#define ADCBS_BUFSIZE_8192	0x00000013
+#define ADCBS_BUFSIZE_10240	0x00000014
+#define ADCBS_BUFSIZE_12288	0x00000015
+#define ADCBS_BUFSIZE_14366	0x00000016
+#define ADCBS_BUFSIZE_16384	0x00000017
+#define ADCBS_BUFSIZE_20480	0x00000018
+#define ADCBS_BUFSIZE_24576	0x00000019
+#define ADCBS_BUFSIZE_28672	0x0000001a
+#define ADCBS_BUFSIZE_32768	0x0000001b
+#define ADCBS_BUFSIZE_40960	0x0000001c
+#define ADCBS_BUFSIZE_49152	0x0000001d
+#define ADCBS_BUFSIZE_57344	0x0000001e
+#define ADCBS_BUFSIZE_65536	0x0000001f
+
+
+#define CDCS			0x50		/* CD-ROM digital channel status register	*/
+
+#define GPSCS			0x51		/* General Purpose SPDIF channel status register*/
+
+#define DBG			0x52		/* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define REG53			0x53		/* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define A_DBG			 0x53
+#define A_DBG_SINGLE_STEP	 0x00020000	/* Set to zero to start dsp */
+#define A_DBG_ZC		 0x40000000	/* zero tram counter */
+#define A_DBG_STEP_ADDR		 0x000003ff
+#define A_DBG_SATURATION_OCCURED 0x20000000
+#define A_DBG_SATURATION_ADDR	 0x0ffc0000
+
+// NOTE: 0x54,55,56: 64-bit
+#define SPCS0			0x54		/* SPDIF output Channel Status 0 register	*/
+
+#define SPCS1			0x55		/* SPDIF output Channel Status 1 register	*/
+
+#define SPCS2			0x56		/* SPDIF output Channel Status 2 register	*/
+
+#define SPCS_CLKACCYMASK	0x30000000	/* Clock accuracy				*/
+#define SPCS_CLKACCY_1000PPM	0x00000000	/* 1000 parts per million			*/
+#define SPCS_CLKACCY_50PPM	0x10000000	/* 50 parts per million				*/
+#define SPCS_CLKACCY_VARIABLE	0x20000000	/* Variable accuracy				*/
+#define SPCS_SAMPLERATEMASK	0x0f000000	/* Sample rate					*/
+#define SPCS_SAMPLERATE_44	0x00000000	/* 44.1kHz sample rate				*/
+#define SPCS_SAMPLERATE_48	0x02000000	/* 48kHz sample rate				*/
+#define SPCS_SAMPLERATE_32	0x03000000	/* 32kHz sample rate				*/
+#define SPCS_CHANNELNUMMASK	0x00f00000	/* Channel number				*/
+#define SPCS_CHANNELNUM_UNSPEC	0x00000000	/* Unspecified channel number			*/
+#define SPCS_CHANNELNUM_LEFT	0x00100000	/* Left channel					*/
+#define SPCS_CHANNELNUM_RIGHT	0x00200000	/* Right channel				*/
+#define SPCS_SOURCENUMMASK	0x000f0000	/* Source number				*/
+#define SPCS_SOURCENUM_UNSPEC	0x00000000	/* Unspecified source number			*/
+#define SPCS_GENERATIONSTATUS	0x00008000	/* Originality flag (see IEC-958 spec)		*/
+#define SPCS_CATEGORYCODEMASK	0x00007f00	/* Category code (see IEC-958 spec)		*/
+#define SPCS_MODEMASK		0x000000c0	/* Mode (see IEC-958 spec)			*/
+#define SPCS_EMPHASISMASK	0x00000038	/* Emphasis					*/
+#define SPCS_EMPHASIS_NONE	0x00000000	/* No emphasis					*/
+#define SPCS_EMPHASIS_50_15	0x00000008	/* 50/15 usec 2 channel				*/
+#define SPCS_COPYRIGHT		0x00000004	/* Copyright asserted flag -- do not modify	*/
+#define SPCS_NOTAUDIODATA	0x00000002	/* 0 = Digital audio, 1 = not audio		*/
+#define SPCS_PROFESSIONAL	0x00000001	/* 0 = Consumer (IEC-958), 1 = pro (AES3-1992)	*/
+
+/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status      		*/
+#define CLIEL			0x58		/* Channel loop interrupt enable low register	*/
+
+#define CLIEH			0x59		/* Channel loop interrupt enable high register	*/
+
+#define CLIPL			0x5a		/* Channel loop interrupt pending low register	*/
+
+#define CLIPH			0x5b		/* Channel loop interrupt pending high register	*/
+
+#define SOLEL			0x5c		/* Stop on loop enable low register		*/
+
+#define SOLEH			0x5d		/* Stop on loop enable high register		*/
+
+#define SPBYPASS		0x5e		/* SPDIF BYPASS mode register			*/
+#define SPBYPASS_SPDIF0_MASK	0x00000003	/* SPDIF 0 bypass mode				*/
+#define SPBYPASS_SPDIF1_MASK	0x0000000c	/* SPDIF 1 bypass mode				*/
+/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C					*/
+#define SPBYPASS_FORMAT		0x00000f00      /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit	*/
+
+#define AC97SLOT		0x5f            /* additional AC97 slots enable bits		*/
+#define AC97SLOT_REAR_RIGHT	0x01		/* Rear left */
+#define AC97SLOT_REAR_LEFT	0x02		/* Rear right */
+#define AC97SLOT_CNTR		0x10            /* Center enable */
+#define AC97SLOT_LFE		0x20            /* LFE enable */
+
+// NOTE: 0x60,61,62: 64-bit
+#define CDSRCS			0x60		/* CD-ROM Sample Rate Converter status register	*/
+
+#define GPSRCS			0x61		/* General Purpose SPDIF sample rate cvt status */
+
+#define ZVSRCS			0x62		/* ZVideo sample rate converter status		*/
+						/* NOTE: This one has no SPDIFLOCKED field	*/
+						/* Assumes sample lock				*/
+
+/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS.			*/
+#define SRCS_SPDIFLOCKED	0x02000000	/* SPDIF stream locked				*/
+#define SRCS_RATELOCKED		0x01000000	/* Sample rate locked				*/
+#define SRCS_ESTSAMPLERATE	0x0007ffff	/* Do not modify this field.			*/
+
+/* Note that these values can vary +/- by a small amount                                        */
+#define SRCS_SPDIFRATE_44	0x0003acd9
+#define SRCS_SPDIFRATE_48	0x00040000
+#define SRCS_SPDIFRATE_96	0x00080000
+
+#define MICIDX                  0x63            /* Microphone recording buffer index register   */
+#define MICIDX_MASK             0x0000ffff      /* 16-bit value                                 */
+#define MICIDX_IDX		0x10000063
+
+#define ADCIDX			0x64		/* ADC recording buffer index register		*/
+#define ADCIDX_MASK		0x0000ffff	/* 16 bit index field				*/
+#define ADCIDX_IDX		0x10000064
+
+#define A_ADCIDX		0x63
+#define A_ADCIDX_IDX		0x10000063
+
+#define A_MICIDX		0x64
+#define A_MICIDX_IDX		0x10000064
+
+#define FXIDX			0x65		/* FX recording buffer index register		*/
+#define FXIDX_MASK		0x0000ffff	/* 16-bit value					*/
+#define FXIDX_IDX		0x10000065
+
+/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status      		*/
+#define HLIEL			0x66		/* Channel half loop interrupt enable low register	*/
+
+#define HLIEH			0x67		/* Channel half loop interrupt enable high register	*/
+
+#define HLIPL			0x68		/* Channel half loop interrupt pending low register	*/
+
+#define HLIPH			0x69		/* Channel half loop interrupt pending high register	*/
+
+// 0x6a,6b,6c used for some recording
+// 0x6d unused
+// 0x6e,6f - tanktable base / offset
+
+/* This is the MPU port on the card (via the game port)						*/
+#define A_MUDATA1		0x70
+#define A_MUCMD1		0x71
+#define A_MUSTAT1		A_MUCMD1
+
+/* This is the MPU port on the Audigy Drive 							*/
+#define A_MUDATA2		0x72
+#define A_MUCMD2		0x73
+#define A_MUSTAT2		A_MUCMD2	
+
+/* The next two are the Audigy equivalent of FXWC						*/
+/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) 		*/
+/* Each bit selects a channel for recording */
+#define A_FXWC1			0x74            /* Selects 0x7f-0x60 for FX recording           */
+#define A_FXWC2			0x75		/* Selects 0x9f-0x80 for FX recording           */
+
+#define A_SPDIF_SAMPLERATE	0x76		/* Set the sample rate of SPDIF output		*/
+#define A_SPDIF_RATE_MASK	0x000000c0
+#define A_SPDIF_48000		0x00000000
+#define A_SPDIF_44100		0x00000080
+#define A_SPDIF_96000		0x00000040
+
+/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell	*/
+/* 0x7a, 0x7b - lookup tables */
+
+#define A_FXRT2			0x7c
+#define A_FXRT_CHANNELE		0x0000003f	/* Effects send bus number for channel's effects send E	*/
+#define A_FXRT_CHANNELF		0x00003f00	/* Effects send bus number for channel's effects send F	*/
+#define A_FXRT_CHANNELG		0x003f0000	/* Effects send bus number for channel's effects send G	*/
+#define A_FXRT_CHANNELH		0x3f000000	/* Effects send bus number for channel's effects send H	*/
+
+#define A_SENDAMOUNTS		0x7d
+#define A_FXSENDAMOUNT_E_MASK	0xFF000000
+#define A_FXSENDAMOUNT_F_MASK	0x00FF0000
+#define A_FXSENDAMOUNT_G_MASK	0x0000FF00
+#define A_FXSENDAMOUNT_H_MASK	0x000000FF
+/* 0x7c, 0x7e "high bit is used for filtering" */
+ 
+/* The send amounts for this one are the same as used with the emu10k1 */
+#define A_FXRT1			0x7e
+#define A_FXRT_CHANNELA		0x0000003f
+#define A_FXRT_CHANNELB		0x00003f00
+#define A_FXRT_CHANNELC		0x003f0000
+#define A_FXRT_CHANNELD		0x3f000000
+
+
+/* Each FX general purpose register is 32 bits in length, all bits are used			*/
+#define FXGPREGBASE		0x100		/* FX general purpose registers base       	*/
+#define A_FXGPREGBASE		0x400		/* Audigy GPRs, 0x400 to 0x5ff			*/
+
+#define A_TANKMEMCTLREGBASE	0x100		/* Tank memory control registers base - only for Audigy */
+#define A_TANKMEMCTLREG_MASK	0x1f		/* only 5 bits used - only for Audigy */
+
+/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is	*/
+/* decompressed back to 20 bits on a read.  There are a total of 160 locations, the last 32	*/
+/* locations are for external TRAM. 								*/
+#define TANKMEMDATAREGBASE	0x200		/* Tank memory data registers base     		*/
+#define TANKMEMDATAREG_MASK	0x000fffff	/* 20 bit tank audio data field			*/
+
+/* Combined address field and memory opcode or flag field.  160 locations, last 32 are external	*/
+#define TANKMEMADDRREGBASE	0x300		/* Tank memory address registers base		*/
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff	/* 20 bit tank address field			*/
+#define TANKMEMADDRREG_CLEAR	0x00800000	/* Clear tank memory				*/
+#define TANKMEMADDRREG_ALIGN	0x00400000	/* Align read or write relative to tank access	*/
+#define TANKMEMADDRREG_WRITE	0x00200000	/* Write to tank memory				*/
+#define TANKMEMADDRREG_READ	0x00100000	/* Read from tank memory			*/
+
+#define MICROCODEBASE		0x400		/* Microcode data base address			*/
+
+/* Each DSP microcode instruction is mapped into 2 doublewords 					*/
+/* NOTE: When writing, always write the LO doubleword first.  Reads can be in either order.	*/
+#define LOWORD_OPX_MASK		0x000ffc00	/* Instruction operand X			*/
+#define LOWORD_OPY_MASK		0x000003ff	/* Instruction operand Y			*/
+#define HIWORD_OPCODE_MASK	0x00f00000	/* Instruction opcode				*/
+#define HIWORD_RESULT_MASK	0x000ffc00	/* Instruction result				*/
+#define HIWORD_OPA_MASK		0x000003ff	/* Instruction operand A			*/
+
+
+/* Audigy Soundcard have a different instruction format */
+#define A_MICROCODEBASE		0x600
+#define A_LOWORD_OPY_MASK	0x000007ff
+#define A_LOWORD_OPX_MASK	0x007ff000
+#define A_HIWORD_OPCODE_MASK	0x0f000000
+#define A_HIWORD_RESULT_MASK	0x007ff000
+#define A_HIWORD_OPA_MASK	0x000007ff
+
+
+/* ------------------- STRUCTURES -------------------- */
+
+typedef struct _snd_emu10k1 emu10k1_t;
+typedef struct _snd_emu10k1_voice emu10k1_voice_t;
+typedef struct _snd_emu10k1_pcm emu10k1_pcm_t;
+
+typedef enum {
+	EMU10K1_EFX,
+	EMU10K1_PCM,
+	EMU10K1_SYNTH,
+	EMU10K1_MIDI
+} emu10k1_voice_type_t;
+
+struct _snd_emu10k1_voice {
+	emu10k1_t *emu;
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    efx: 1,
+	    synth: 1,
+	    midi: 1;
+	void (*interrupt)(emu10k1_t *emu, emu10k1_voice_t *pvoice);
+
+	emu10k1_pcm_t *epcm;
+};
+
+typedef enum {
+	PLAYBACK_EMUVOICE,
+	PLAYBACK_EFX,
+	CAPTURE_AC97ADC,
+	CAPTURE_AC97MIC,
+	CAPTURE_EFX
+} snd_emu10k1_pcm_type_t;
+
+struct _snd_emu10k1_pcm {
+	emu10k1_t *emu;
+	snd_emu10k1_pcm_type_t type;
+	snd_pcm_substream_t *substream;
+	emu10k1_voice_t *voices[NUM_EFX_PLAYBACK];
+	emu10k1_voice_t *extra;
+	unsigned short running;
+	unsigned short first_ptr;
+	snd_util_memblk_t *memblk;
+	unsigned int start_addr;
+	unsigned int ccca_start_addr;
+	unsigned int capture_ipr;	/* interrupt acknowledge mask */
+	unsigned int capture_inte;	/* interrupt enable mask */
+	unsigned int capture_ba_reg;	/* buffer address register */
+	unsigned int capture_bs_reg;	/* buffer size register */
+	unsigned int capture_idx_reg;	/* buffer index register */
+	unsigned int capture_cr_val;	/* control value */
+	unsigned int capture_cr_val2;	/* control value2 (for audigy) */
+	unsigned int capture_bs_val;	/* buffer size value */
+	unsigned int capture_bufsize;	/* buffer size in bytes */
+};
+
+typedef struct {
+	/* mono, left, right x 8 sends (4 on emu10k1) */
+	unsigned char send_routing[3][8];
+	unsigned char send_volume[3][8];
+	unsigned short attn[3];
+	emu10k1_pcm_t *epcm;
+} emu10k1_pcm_mixer_t;
+
+#define snd_emu10k1_compose_send_routing(route) \
+((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
+
+#define snd_emu10k1_compose_audigy_fxrt1(route) \
+((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
+
+#define snd_emu10k1_compose_audigy_fxrt2(route) \
+((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
+
+typedef struct snd_emu10k1_memblk {
+	snd_util_memblk_t mem;
+	/* private part */
+	int first_page, last_page, pages, mapped_page;
+	unsigned int map_locked;
+	struct list_head mapped_link;
+	struct list_head mapped_order_link;
+} emu10k1_memblk_t;
+
+#define snd_emu10k1_memblk_offset(blk)	(((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
+
+#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE	16
+
+typedef struct {
+	struct list_head list;		/* list link container */
+	unsigned int vcount;
+	unsigned int count;		/* count of GPR (1..16) */
+	unsigned short gpr[32];		/* GPR number(s) */
+	unsigned int value[32];
+	unsigned int min;		/* minimum range */
+	unsigned int max;		/* maximum range */
+	unsigned int translation;	/* translation type (EMU10K1_GPR_TRANSLATION*) */
+	snd_kcontrol_t *kcontrol;
+} snd_emu10k1_fx8010_ctl_t;
+
+typedef void (snd_fx8010_irq_handler_t)(emu10k1_t *emu, void *private_data);
+
+typedef struct _snd_emu10k1_fx8010_irq {
+	struct _snd_emu10k1_fx8010_irq *next;
+	snd_fx8010_irq_handler_t *handler;
+	unsigned short gpr_running;
+	void *private_data;
+} snd_emu10k1_fx8010_irq_t;
+
+typedef struct {
+	unsigned int valid: 1,
+		     opened: 1,
+		     active: 1;
+	unsigned int channels;		/* 16-bit channels count */
+	unsigned int tram_start;	/* initial ring buffer position in TRAM (in samples) */
+	unsigned int buffer_size;	/* count of buffered samples */
+	unsigned short gpr_size;		/* GPR containing size of ring buffer in samples (host) */
+	unsigned short gpr_ptr;		/* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+	unsigned short gpr_count;	/* GPR containing count of samples between two interrupts (host) */
+	unsigned short gpr_tmpcount;	/* GPR containing current count of samples to interrupt (host = set, FX8010) */
+	unsigned short gpr_trigger;	/* GPR containing trigger (activate) information (host) */
+	unsigned short gpr_running;	/* GPR containing info if PCM is running (FX8010) */
+	unsigned char etram[32];	/* external TRAM address & data */
+	snd_pcm_indirect_t pcm_rec;
+	unsigned int tram_pos;
+	unsigned int tram_shift;
+	snd_emu10k1_fx8010_irq_t *irq;
+} snd_emu10k1_fx8010_pcm_t;
+
+typedef struct {
+	unsigned short fxbus_mask;	/* used FX buses (bitmask) */
+	unsigned short extin_mask;	/* used external inputs (bitmask) */
+	unsigned short extout_mask;	/* used external outputs (bitmask) */
+	unsigned short pad1;
+	unsigned int itram_size;	/* internal TRAM size in samples */
+	struct snd_dma_buffer etram_pages; /* external TRAM pages and size */
+	unsigned int dbg;		/* FX debugger register */
+	unsigned char name[128];
+	int gpr_size;			/* size of allocated GPR controls */
+	int gpr_count;			/* count of used kcontrols */
+	struct list_head gpr_ctl;	/* GPR controls */
+	struct semaphore lock;
+	snd_emu10k1_fx8010_pcm_t pcm[8];
+	spinlock_t irq_lock;
+	snd_emu10k1_fx8010_irq_t *irq_handlers;
+} snd_emu10k1_fx8010_t;
+
+#define emu10k1_gpr_ctl(n) list_entry(n, snd_emu10k1_fx8010_ctl_t, list)
+
+typedef struct {
+	struct _snd_emu10k1 *emu;
+	snd_rawmidi_t *rmidi;
+	snd_rawmidi_substream_t *substream_input;
+	snd_rawmidi_substream_t *substream_output;
+	unsigned int midi_mode;
+	spinlock_t input_lock;
+	spinlock_t output_lock;
+	spinlock_t open_lock;
+	int tx_enable, rx_enable;
+	int port;
+	int ipr_tx, ipr_rx;
+	void (*interrupt)(emu10k1_t *emu, unsigned int status);
+} emu10k1_midi_t;
+
+typedef struct {
+	u32 vendor;
+	u32 device;
+	u32 subsystem;
+	unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */
+	unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */
+	unsigned char ca0102_chip;  /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
+	unsigned char ca0108_chip;  /* Audigy 2 Value */
+	unsigned char ca0151_chip;  /* P16V */
+	unsigned char spk71;        /* Has 7.1 speakers */
+	unsigned char spdif_bug;    /* Has Spdif phasing bug */
+	unsigned char ac97_chip;    /* Has an AC97 chip */
+	unsigned char ecard;        /* APS EEPROM */
+	char * driver;
+	char * name;
+} emu_chip_details_t;
+
+struct _snd_emu10k1 {
+	int irq;
+
+	unsigned long port;			/* I/O port number */
+	unsigned int APS: 1,			/* APS flag */
+	    no_ac97: 1,				/* no AC'97 */
+	    tos_link: 1,			/* tos link detected */
+	    rear_ac97: 1,			/* rear channels are on AC'97 */
+	    spk71:1;				/* 7.1 configuration (Audigy 2 ZS) */
+	const emu_chip_details_t *card_capabilities;	/* Contains profile of card capabilities */
+	unsigned int audigy;			/* is Audigy? */
+	unsigned int revision;			/* chip revision */
+	unsigned int serial;			/* serial number */
+	unsigned short model;			/* subsystem id */
+	unsigned int card_type;			/* EMU10K1_CARD_* */
+	unsigned int ecard_ctrl;		/* ecard control bits */
+	unsigned long dma_mask;			/* PCI DMA mask */
+	int max_cache_pages;			/* max memory size / PAGE_SIZE */
+	struct snd_dma_buffer silent_page;	/* silent page */
+	struct snd_dma_buffer ptb_pages;	/* page table pages */
+	struct snd_dma_device p16v_dma_dev;
+	struct snd_dma_buffer p16v_buffer;
+
+	snd_util_memhdr_t *memhdr;		/* page allocation list */
+	emu10k1_memblk_t *reserved_page;	/* reserved page */
+
+	struct list_head mapped_link_head;
+	struct list_head mapped_order_link_head;
+	void **page_ptr_table;
+	unsigned long *page_addr_table;
+	spinlock_t memblk_lock;
+
+	unsigned int spdif_bits[3];		/* s/pdif out setup */
+
+	snd_emu10k1_fx8010_t fx8010;		/* FX8010 info */
+	int gpr_base;
+	
+	ac97_t *ac97;
+
+	struct pci_dev *pci;
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	snd_pcm_t *pcm_mic;
+	snd_pcm_t *pcm_efx;
+	snd_pcm_t *pcm_p16v;
+
+	spinlock_t synth_lock;
+	void *synth;
+	int (*get_synth_voice)(emu10k1_t *emu);
+
+	spinlock_t reg_lock;
+	spinlock_t emu_lock;
+	spinlock_t voice_lock;
+	struct semaphore ptb_lock;
+
+	emu10k1_voice_t voices[NUM_G];
+	emu10k1_voice_t p16v_voices[4];
+	int p16v_device_offset;
+	emu10k1_pcm_mixer_t pcm_mixer[32];
+	emu10k1_pcm_mixer_t efx_pcm_mixer[NUM_EFX_PLAYBACK];
+	snd_kcontrol_t *ctl_send_routing;
+	snd_kcontrol_t *ctl_send_volume;
+	snd_kcontrol_t *ctl_attn;
+	snd_kcontrol_t *ctl_efx_send_routing;
+	snd_kcontrol_t *ctl_efx_send_volume;
+	snd_kcontrol_t *ctl_efx_attn;
+
+	void (*hwvol_interrupt)(emu10k1_t *emu, unsigned int status);
+	void (*capture_interrupt)(emu10k1_t *emu, unsigned int status);
+	void (*capture_mic_interrupt)(emu10k1_t *emu, unsigned int status);
+	void (*capture_efx_interrupt)(emu10k1_t *emu, unsigned int status);
+	void (*spdif_interrupt)(emu10k1_t *emu, unsigned int status);
+	void (*dsp_interrupt)(emu10k1_t *emu);
+
+	snd_pcm_substream_t *pcm_capture_substream;
+	snd_pcm_substream_t *pcm_capture_mic_substream;
+	snd_pcm_substream_t *pcm_capture_efx_substream;
+	snd_pcm_substream_t *pcm_playback_efx_substream;
+
+	snd_timer_t *timer;
+
+	emu10k1_midi_t midi;
+	emu10k1_midi_t midi2; /* for audigy */
+
+	unsigned int efx_voices_mask[2];
+	unsigned int next_free_voice;
+};
+
+int snd_emu10k1_create(snd_card_t * card,
+		       struct pci_dev *pci,
+		       unsigned short extin_mask,
+		       unsigned short extout_mask,
+		       long max_cache_bytes,
+		       int enable_ir,
+		       emu10k1_t ** remu);
+
+int snd_emu10k1_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_pcm_mic(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_p16v_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_p16v_free(emu10k1_t * emu);
+int snd_p16v_mixer(emu10k1_t * emu);
+int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_mixer(emu10k1_t * emu);
+int snd_emu10k1_timer(emu10k1_t * emu, int device);
+int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep);
+
+irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/* initialization */
+void snd_emu10k1_voice_init(emu10k1_t * emu, int voice);
+int snd_emu10k1_init_efx(emu10k1_t *emu);
+void snd_emu10k1_free_efx(emu10k1_t *emu);
+int snd_emu10k1_fx8010_tram_setup(emu10k1_t *emu, u32 size);
+
+/* I/O functions */
+unsigned int snd_emu10k1_ptr_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
+unsigned int snd_emu10k1_ptr20_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr20_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
+unsigned int snd_emu10k1_efx_read(emu10k1_t *emu, unsigned int pc);
+void snd_emu10k1_intr_enable(emu10k1_t *emu, unsigned int intrenb);
+void snd_emu10k1_intr_disable(emu10k1_t *emu, unsigned int intrenb);
+void snd_emu10k1_voice_intr_enable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_disable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_ack(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_enable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_disable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_ack(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_set_loop_stop(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_clear_loop_stop(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_wait(emu10k1_t *emu, unsigned int wait);
+static inline unsigned int snd_emu10k1_wc(emu10k1_t *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; }
+unsigned short snd_emu10k1_ac97_read(ac97_t *ac97, unsigned short reg);
+void snd_emu10k1_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short data);
+unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate);
+
+/* memory allocation */
+snd_util_memblk_t *snd_emu10k1_alloc_pages(emu10k1_t *emu, snd_pcm_substream_t *substream);
+int snd_emu10k1_free_pages(emu10k1_t *emu, snd_util_memblk_t *blk);
+snd_util_memblk_t *snd_emu10k1_synth_alloc(emu10k1_t *emu, unsigned int size);
+int snd_emu10k1_synth_free(emu10k1_t *emu, snd_util_memblk_t *blk);
+int snd_emu10k1_synth_bzero(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, int size);
+int snd_emu10k1_synth_copy_from_user(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, const char __user *data, int size);
+int snd_emu10k1_memblk_map(emu10k1_t *emu, emu10k1_memblk_t *blk);
+
+/* voice allocation */
+int snd_emu10k1_voice_alloc(emu10k1_t *emu, emu10k1_voice_type_t type, int pair, emu10k1_voice_t **rvoice);
+int snd_emu10k1_voice_free(emu10k1_t *emu, emu10k1_voice_t *pvoice);
+
+/* MIDI uart */
+int snd_emu10k1_midi(emu10k1_t * emu);
+int snd_emu10k1_audigy_midi(emu10k1_t * emu);
+
+/* proc interface */
+int snd_emu10k1_proc_init(emu10k1_t * emu);
+
+/* fx8010 irq handler */
+int snd_emu10k1_fx8010_register_irq_handler(emu10k1_t *emu,
+					    snd_fx8010_irq_handler_t *handler,
+					    unsigned char gpr_running,
+					    void *private_data,
+					    snd_emu10k1_fx8010_irq_t **r_irq);
+int snd_emu10k1_fx8010_unregister_irq_handler(emu10k1_t *emu,
+					      snd_emu10k1_fx8010_irq_t *irq);
+
+#endif /* __KERNEL__ */
+
+/*
+ * ---- FX8010 ----
+ */
+
+#define EMU10K1_CARD_CREATIVE			0x00000000
+#define EMU10K1_CARD_EMUAPS			0x00000001
+
+#define EMU10K1_FX8010_PCM_COUNT		8
+
+/* instruction set */
+#define iMAC0	 0x00	/* R = A + (X * Y >> 31)   ; saturation */
+#define iMAC1	 0x01	/* R = A + (-X * Y >> 31)  ; saturation */
+#define iMAC2	 0x02	/* R = A + (X * Y >> 31)   ; wraparound */
+#define iMAC3	 0x03	/* R = A + (-X * Y >> 31)  ; wraparound */
+#define iMACINT0 0x04	/* R = A + X * Y	   ; saturation */
+#define iMACINT1 0x05	/* R = A + X * Y	   ; wraparound (31-bit) */
+#define iACC3	 0x06	/* R = A + X + Y	   ; saturation */
+#define iMACMV   0x07	/* R = A, acc += X * Y >> 31 */
+#define iANDXOR  0x08	/* R = (A & X) ^ Y */
+#define iTSTNEG  0x09	/* R = (A >= Y) ? X : ~X */
+#define iLIMITGE 0x0a	/* R = (A >= Y) ? X : Y */
+#define iLIMITLT 0x0b	/* R = (A < Y) ? X : Y */
+#define iLOG	 0x0c	/* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
+#define iEXP	 0x0d	/* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
+#define iINTERP  0x0e	/* R = A + (X * (Y - A) >> 31)  ; saturation */
+#define iSKIP    0x0f	/* R = A (cc_reg), X (count), Y (cc_test) */
+
+/* GPRs */
+#define FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x0f */
+#define EXTIN(x)	(0x10 + (x))	/* x = 0x00 - 0x0f */
+#define EXTOUT(x)	(0x20 + (x))	/* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
+#define FXBUS2(x)	(0x30 + (x))	/* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
+					/* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
+
+#define C_00000000	0x40
+#define C_00000001	0x41
+#define C_00000002	0x42
+#define C_00000003	0x43
+#define C_00000004	0x44
+#define C_00000008	0x45
+#define C_00000010	0x46
+#define C_00000020	0x47
+#define C_00000100	0x48
+#define C_00010000	0x49
+#define C_00080000	0x4a
+#define C_10000000	0x4b
+#define C_20000000	0x4c
+#define C_40000000	0x4d
+#define C_80000000	0x4e
+#define C_7fffffff	0x4f
+#define C_ffffffff	0x50
+#define C_fffffffe	0x51
+#define C_c0000000	0x52
+#define C_4f1bbcdc	0x53
+#define C_5a7ef9db	0x54
+#define C_00100000	0x55		/* ?? */
+#define GPR_ACCU	0x56		/* ACCUM, accumulator */
+#define GPR_COND	0x57		/* CCR, condition register */
+#define GPR_NOISE0	0x58		/* noise source */
+#define GPR_NOISE1	0x59		/* noise source */
+#define GPR_IRQ		0x5a		/* IRQ register */
+#define GPR_DBAC	0x5b		/* TRAM Delay Base Address Counter */
+#define GPR(x)		(FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
+#define ITRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+#define ITRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+
+#define A_ITRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_DATA(x)	(TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+
+#define A_FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x3f FX buses */
+#define A_EXTIN(x)	(0x40 + (x))	/* x = 0x00 - 0x0f physical ins */
+#define A_P16VIN(x)	(0x50 + (x))	/* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
+#define A_EXTOUT(x)	(0x60 + (x))	/* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown   */
+#define A_FXBUS2(x)	(0x80 + (x))	/* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
+#define A_EMU32OUTH(x)	(0xa0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
+#define A_EMU32OUTL(x)	(0xb0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
+#define A_GPR(x)	(A_FXGPREGBASE + (x))
+
+/* cc_reg constants */
+#define CC_REG_NORMALIZED C_00000001
+#define CC_REG_BORROW	C_00000002
+#define CC_REG_MINUS	C_00000004
+#define CC_REG_ZERO	C_00000008
+#define CC_REG_SATURATE	C_00000010
+#define CC_REG_NONZERO	C_00000100
+
+/* FX buses */
+#define FXBUS_PCM_LEFT		0x00
+#define FXBUS_PCM_RIGHT		0x01
+#define FXBUS_PCM_LEFT_REAR	0x02
+#define FXBUS_PCM_RIGHT_REAR	0x03
+#define FXBUS_MIDI_LEFT		0x04
+#define FXBUS_MIDI_RIGHT	0x05
+#define FXBUS_PCM_CENTER	0x06
+#define FXBUS_PCM_LFE		0x07
+#define FXBUS_PCM_LEFT_FRONT	0x08
+#define FXBUS_PCM_RIGHT_FRONT	0x09
+#define FXBUS_MIDI_REVERB	0x0c
+#define FXBUS_MIDI_CHORUS	0x0d
+#define FXBUS_PCM_LEFT_SIDE	0x0e
+#define FXBUS_PCM_RIGHT_SIDE	0x0f
+#define FXBUS_PT_LEFT		0x14
+#define FXBUS_PT_RIGHT		0x15
+
+/* Inputs */
+#define EXTIN_AC97_L	   0x00	/* AC'97 capture channel - left */
+#define EXTIN_AC97_R	   0x01	/* AC'97 capture channel - right */
+#define EXTIN_SPDIF_CD_L   0x02	/* internal S/PDIF CD - onboard - left */
+#define EXTIN_SPDIF_CD_R   0x03	/* internal S/PDIF CD - onboard - right */
+#define EXTIN_ZOOM_L	   0x04	/* Zoom Video I2S - left */
+#define EXTIN_ZOOM_R	   0x05	/* Zoom Video I2S - right */
+#define EXTIN_TOSLINK_L	   0x06	/* LiveDrive - TOSLink Optical - left */
+#define EXTIN_TOSLINK_R    0x07	/* LiveDrive - TOSLink Optical - right */
+#define EXTIN_LINE1_L	   0x08	/* LiveDrive - Line/Mic 1 - left */
+#define EXTIN_LINE1_R	   0x09	/* LiveDrive - Line/Mic 1 - right */
+#define EXTIN_COAX_SPDIF_L 0x0a	/* LiveDrive - Coaxial S/PDIF - left */
+#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
+#define EXTIN_LINE2_L	   0x0c	/* LiveDrive - Line/Mic 2 - left */
+#define EXTIN_LINE2_R	   0x0d	/* LiveDrive - Line/Mic 2 - right */
+
+/* Outputs */
+#define EXTOUT_AC97_L	   0x00	/* AC'97 playback channel - left */
+#define EXTOUT_AC97_R	   0x01	/* AC'97 playback channel - right */
+#define EXTOUT_TOSLINK_L   0x02	/* LiveDrive - TOSLink Optical - left */
+#define EXTOUT_TOSLINK_R   0x03	/* LiveDrive - TOSLink Optical - right */
+#define EXTOUT_AC97_CENTER 0x04	/* SB Live 5.1 - center */
+#define EXTOUT_AC97_LFE	   0x05 /* SB Live 5.1 - LFE */
+#define EXTOUT_HEADPHONE_L 0x06	/* LiveDrive - Headphone - left */
+#define EXTOUT_HEADPHONE_R 0x07	/* LiveDrive - Headphone - right */
+#define EXTOUT_REAR_L	   0x08	/* Rear channel - left */
+#define EXTOUT_REAR_R	   0x09	/* Rear channel - right */
+#define EXTOUT_ADC_CAP_L   0x0a	/* ADC Capture buffer - left */
+#define EXTOUT_ADC_CAP_R   0x0b	/* ADC Capture buffer - right */
+#define EXTOUT_MIC_CAP	   0x0c	/* MIC Capture buffer */
+#define EXTOUT_AC97_REAR_L 0x0d	/* SB Live 5.1 (c) 2003 - Rear Left */
+#define EXTOUT_AC97_REAR_R 0x0e	/* SB Live 5.1 (c) 2003 - Rear Right */
+#define EXTOUT_ACENTER	   0x11 /* Analog Center */
+#define EXTOUT_ALFE	   0x12 /* Analog LFE */
+
+/* Audigy Inputs */
+#define A_EXTIN_AC97_L		0x00	/* AC'97 capture channel - left */
+#define A_EXTIN_AC97_R		0x01	/* AC'97 capture channel - right */
+#define A_EXTIN_SPDIF_CD_L	0x02	/* digital CD left */
+#define A_EXTIN_SPDIF_CD_R	0x03	/* digital CD left */
+#define A_EXTIN_OPT_SPDIF_L     0x04    /* audigy drive Optical SPDIF - left */
+#define A_EXTIN_OPT_SPDIF_R     0x05    /*                              right */ 
+#define A_EXTIN_LINE2_L		0x08	/* audigy drive line2/mic2 - left */
+#define A_EXTIN_LINE2_R		0x09	/*                           right */
+#define A_EXTIN_ADC_L		0x0a    /* Philips ADC - left */
+#define A_EXTIN_ADC_R		0x0b    /*               right */
+#define A_EXTIN_AUX2_L		0x0c	/* audigy drive aux2 - left */
+#define A_EXTIN_AUX2_R		0x0d	/*                   - right */
+
+/* Audigiy Outputs */
+#define A_EXTOUT_FRONT_L	0x00	/* digital front left */
+#define A_EXTOUT_FRONT_R	0x01	/*               right */
+#define A_EXTOUT_CENTER		0x02	/* digital front center */
+#define A_EXTOUT_LFE		0x03	/* digital front lfe */
+#define A_EXTOUT_HEADPHONE_L	0x04	/* headphone audigy drive left */
+#define A_EXTOUT_HEADPHONE_R	0x05	/*                        right */
+#define A_EXTOUT_REAR_L		0x06	/* digital rear left */
+#define A_EXTOUT_REAR_R		0x07	/*              right */
+#define A_EXTOUT_AFRONT_L	0x08	/* analog front left */
+#define A_EXTOUT_AFRONT_R	0x09	/*              right */
+#define A_EXTOUT_ACENTER	0x0a	/* analog center */
+#define A_EXTOUT_ALFE		0x0b	/* analog LFE */
+#define A_EXTOUT_ASIDE_L	0x0c	/* analog side left  - Audigy 2 ZS */
+#define A_EXTOUT_ASIDE_R	0x0d	/*             right - Audigy 2 ZS */
+#define A_EXTOUT_AREAR_L	0x0e	/* analog rear left */
+#define A_EXTOUT_AREAR_R	0x0f	/*             right */
+#define A_EXTOUT_AC97_L		0x10	/* AC97 left (front) */
+#define A_EXTOUT_AC97_R		0x11	/*      right */
+#define A_EXTOUT_ADC_CAP_L	0x16	/* ADC capture buffer left */
+#define A_EXTOUT_ADC_CAP_R	0x17	/*                    right */
+#define A_EXTOUT_MIC_CAP	0x18	/* Mic capture buffer */
+
+/* Audigy constants */
+#define A_C_00000000	0xc0
+#define A_C_00000001	0xc1
+#define A_C_00000002	0xc2
+#define A_C_00000003	0xc3
+#define A_C_00000004	0xc4
+#define A_C_00000008	0xc5
+#define A_C_00000010	0xc6
+#define A_C_00000020	0xc7
+#define A_C_00000100	0xc8
+#define A_C_00010000	0xc9
+#define A_C_00000800	0xca
+#define A_C_10000000	0xcb
+#define A_C_20000000	0xcc
+#define A_C_40000000	0xcd
+#define A_C_80000000	0xce
+#define A_C_7fffffff	0xcf
+#define A_C_ffffffff	0xd0
+#define A_C_fffffffe	0xd1
+#define A_C_c0000000	0xd2
+#define A_C_4f1bbcdc	0xd3
+#define A_C_5a7ef9db	0xd4
+#define A_C_00100000	0xd5
+#define A_GPR_ACCU	0xd6		/* ACCUM, accumulator */
+#define A_GPR_COND	0xd7		/* CCR, condition register */
+#define A_GPR_NOISE0	0xd8		/* noise source */
+#define A_GPR_NOISE1	0xd9		/* noise source */
+#define A_GPR_IRQ	0xda		/* IRQ register */
+#define A_GPR_DBAC	0xdb		/* TRAM Delay Base Address Counter - internal */
+#define A_GPR_DBACE	0xde		/* TRAM Delay Base Address Counter - external */
+
+/* definitions for debug register */
+#define EMU10K1_DBG_ZC			0x80000000	/* zero tram counter */
+#define EMU10K1_DBG_SATURATION_OCCURED	0x02000000	/* saturation control */
+#define EMU10K1_DBG_SATURATION_ADDR	0x01ff0000	/* saturation address */
+#define EMU10K1_DBG_SINGLE_STEP		0x00008000	/* single step mode */
+#define EMU10K1_DBG_STEP		0x00004000	/* start single step */
+#define EMU10K1_DBG_CONDITION_CODE	0x00003e00	/* condition code */
+#define EMU10K1_DBG_SINGLE_STEP_ADDR	0x000001ff	/* single step address */
+
+/* tank memory address line */
+#ifndef __KERNEL__
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff	/* 20 bit tank address field			*/
+#define TANKMEMADDRREG_CLEAR	 0x00800000	/* Clear tank memory				*/
+#define TANKMEMADDRREG_ALIGN	 0x00400000	/* Align read or write relative to tank access	*/
+#define TANKMEMADDRREG_WRITE	 0x00200000	/* Write to tank memory				*/
+#define TANKMEMADDRREG_READ	 0x00100000	/* Read from tank memory			*/
+#endif
+
+typedef struct {
+	unsigned int card;			/* card type */
+	unsigned int internal_tram_size;	/* in samples */
+	unsigned int external_tram_size;	/* in samples */
+	char fxbus_names[16][32];		/* names of FXBUSes */
+	char extin_names[16][32];		/* names of external inputs */
+	char extout_names[32][32];		/* names of external outputs */
+	unsigned int gpr_controls;		/* count of GPR controls */
+} emu10k1_fx8010_info_t;
+
+#define EMU10K1_GPR_TRANSLATION_NONE		0
+#define EMU10K1_GPR_TRANSLATION_TABLE100	1
+#define EMU10K1_GPR_TRANSLATION_BASS		2
+#define EMU10K1_GPR_TRANSLATION_TREBLE		3
+#define EMU10K1_GPR_TRANSLATION_ONOFF		4
+
+typedef struct {
+	snd_ctl_elem_id_t id;		/* full control ID definition */
+	unsigned int vcount;		/* visible count */
+	unsigned int count;		/* count of GPR (1..16) */
+	unsigned short gpr[32];		/* GPR number(s) */
+	unsigned int value[32];		/* initial values */
+	unsigned int min;		/* minimum range */
+	unsigned int max;		/* maximum range */
+	unsigned int translation;	/* translation type (EMU10K1_GPR_TRANSLATION*) */
+} emu10k1_fx8010_control_gpr_t;
+
+typedef struct {
+	char name[128];
+
+	DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */
+	u_int32_t __user *gpr_map;	  /* initializers */
+
+	unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */
+	emu10k1_fx8010_control_gpr_t __user *gpr_add_controls; /* GPR controls to add/replace */
+
+	unsigned int gpr_del_control_count; /* count of GPR controls to remove */
+	snd_ctl_elem_id_t __user *gpr_del_controls; /* IDs of GPR controls to remove */
+
+	unsigned int gpr_list_control_count; /* count of GPR controls to list */
+	unsigned int gpr_list_control_total; /* total count of GPR controls */
+	emu10k1_fx8010_control_gpr_t __user *gpr_list_controls; /* listed GPR controls */
+
+	DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */
+	u_int32_t __user *tram_data_map;  /* data initializers */
+	u_int32_t __user *tram_addr_map;  /* map initializers */
+
+	DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */
+	u_int32_t __user *code;		  /* one instruction - 64 bits */
+} emu10k1_fx8010_code_t;
+
+typedef struct {
+	unsigned int address;		/* 31.bit == 1 -> external TRAM */
+	unsigned int size;		/* size in samples (4 bytes) */
+	unsigned int *samples;		/* pointer to samples (20-bit) */
+					/* NULL->clear memory */
+} emu10k1_fx8010_tram_t;
+
+typedef struct {
+	unsigned int substream;		/* substream number */
+	unsigned int res1;		/* reserved */
+	unsigned int channels;		/* 16-bit channels count, zero = remove this substream */
+	unsigned int tram_start;	/* ring buffer position in TRAM (in samples) */
+	unsigned int buffer_size;	/* count of buffered samples */
+	unsigned short gpr_size;		/* GPR containing size of ringbuffer in samples (host) */
+	unsigned short gpr_ptr;		/* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+	unsigned short gpr_count;	/* GPR containing count of samples between two interrupts (host) */
+	unsigned short gpr_tmpcount;	/* GPR containing current count of samples to interrupt (host = set, FX8010) */
+	unsigned short gpr_trigger;	/* GPR containing trigger (activate) information (host) */
+	unsigned short gpr_running;	/* GPR containing info if PCM is running (FX8010) */
+	unsigned char pad;		/* reserved */
+	unsigned char etram[32];	/* external TRAM address & data (one per channel) */
+	unsigned int res2;		/* reserved */
+} emu10k1_fx8010_pcm_t;
+
+#define SNDRV_EMU10K1_IOCTL_INFO	_IOR ('H', 0x10, emu10k1_fx8010_info_t)
+#define SNDRV_EMU10K1_IOCTL_CODE_POKE	_IOW ('H', 0x11, emu10k1_fx8010_code_t)
+#define SNDRV_EMU10K1_IOCTL_CODE_PEEK	_IOWR('H', 0x12, emu10k1_fx8010_code_t)
+#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP	_IOW ('H', 0x20, int)
+#define SNDRV_EMU10K1_IOCTL_TRAM_POKE	_IOW ('H', 0x21, emu10k1_fx8010_tram_t)
+#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK	_IOWR('H', 0x22, emu10k1_fx8010_tram_t)
+#define SNDRV_EMU10K1_IOCTL_PCM_POKE	_IOW ('H', 0x30, emu10k1_fx8010_pcm_t)
+#define SNDRV_EMU10K1_IOCTL_PCM_PEEK	_IOWR('H', 0x31, emu10k1_fx8010_pcm_t)
+#define SNDRV_EMU10K1_IOCTL_STOP	_IO  ('H', 0x80)
+#define SNDRV_EMU10K1_IOCTL_CONTINUE	_IO  ('H', 0x81)
+#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
+#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP	_IOW ('H', 0x83, int)
+#define SNDRV_EMU10K1_IOCTL_DBG_READ	_IOR ('H', 0x84, int)
+
+#endif	/* __SOUND_EMU10K1_H */
diff --git a/include/sound/emu10k1_synth.h b/include/sound/emu10k1_synth.h
new file mode 100644
index 000000000000..df0df1d09552
--- /dev/null
+++ b/include/sound/emu10k1_synth.h
@@ -0,0 +1,39 @@
+#ifndef __EMU10K1_SYNTH_H
+#define __EMU10K1_SYNTH_H
+/*
+ *  Defines for the Emu10k1 WaveTable synth
+ *
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "emu10k1.h"
+#include "emux_synth.h"
+
+/* sequencer device id */
+#define SNDRV_SEQ_DEV_ID_EMU10K1_SYNTH	"emu10k1-synth"
+
+/* argument for snd_seq_device_new */
+typedef struct snd_emu10k1_synth_arg {
+	emu10k1_t *hwptr;	/* chip */
+	int index;		/* sequencer client index */
+	int seq_ports;		/* number of sequencer ports to be created */
+	int max_voices;		/* maximum number of voices for wavetable */
+} snd_emu10k1_synth_arg_t;
+
+#define EMU10K1_MAX_MEMSIZE	(32 * 1024 * 1024) /* 32MB */
+
+#endif
diff --git a/include/sound/emu8000.h b/include/sound/emu8000.h
new file mode 100644
index 000000000000..4362c54e09d0
--- /dev/null
+++ b/include/sound/emu8000.h
@@ -0,0 +1,120 @@
+#ifndef __SOUND_EMU8000_H
+#define __SOUND_EMU8000_H
+/*
+ *  Defines for the emu8000 (AWE32/64)
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "emux_synth.h"
+#include "seq_kernel.h"
+
+/*
+ * Hardware parameters.
+ */
+#define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/
+#define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */
+#define EMU8000_CHANNELS   32	/* Number of hardware channels */
+#define EMU8000_DRAM_VOICES	30	/* number of normal voices */
+
+/* Flags to set a dma channel to read or write */
+#define EMU8000_RAM_READ   0
+#define EMU8000_RAM_WRITE  1
+#define EMU8000_RAM_CLOSE  2
+#define EMU8000_RAM_MODE_MASK	0x03
+#define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */
+
+enum {
+	EMU8000_CONTROL_BASS = 0,
+	EMU8000_CONTROL_TREBLE,
+	EMU8000_CONTROL_CHORUS_MODE,
+	EMU8000_CONTROL_REVERB_MODE,
+	EMU8000_CONTROL_FM_CHORUS_DEPTH,
+	EMU8000_CONTROL_FM_REVERB_DEPTH,
+	EMU8000_NUM_CONTROLS,
+};
+
+/*
+ * Structure to hold all state information for the emu8000 driver.
+ *
+ * Note 1: The chip supports 32 channels in hardware this is max_channels
+ * some of the channels may be used for other things so max_channels is
+ * the number in use for wave voices.
+ */
+typedef struct snd_emu8000 {
+
+	snd_emux_t *emu;
+
+	int index;		/* sequencer client index */
+	int seq_ports;		/* number of sequencer ports */
+	int fm_chorus_depth;	/* FM OPL3 chorus depth */
+	int fm_reverb_depth;	/* FM OPL3 reverb depth */
+
+	int mem_size;		/* memory size */
+	unsigned long port1;	/* Port usually base+0 */
+	unsigned long port2;	/* Port usually at base+0x400 */
+	unsigned long port3;	/* Port usually at base+0x800 */
+	struct resource *res_port1;
+	struct resource *res_port2;
+	struct resource *res_port3;
+	unsigned short last_reg;/* Last register command */
+	spinlock_t reg_lock;
+
+	int dram_checked;
+
+	snd_card_t *card;		/* The card that this belongs to */
+
+	int chorus_mode;
+	int reverb_mode;
+	int bass_level;
+	int treble_level;
+
+	snd_util_memhdr_t *memhdr;
+
+	spinlock_t control_lock;
+	snd_kcontrol_t *controls[EMU8000_NUM_CONTROLS];
+
+	snd_pcm_t *pcm; /* pcm on emu8000 wavetable */
+
+} emu8000_t;
+
+/* sequencer device id */
+#define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth"
+
+
+/* exported functions */
+int snd_emu8000_new(snd_card_t *card, int device, long port, int seq_ports, snd_seq_device_t **ret);
+void snd_emu8000_poke(emu8000_t *emu, unsigned int port, unsigned int reg,
+		      unsigned int val);
+unsigned short snd_emu8000_peek(emu8000_t *emu, unsigned int port,
+				unsigned int reg);
+void snd_emu8000_poke_dw(emu8000_t *emu, unsigned int port, unsigned int reg,
+			 unsigned int val);
+unsigned int snd_emu8000_peek_dw(emu8000_t *emu, unsigned int port,
+				 unsigned int reg);
+void snd_emu8000_dma_chan(emu8000_t *emu, int ch, int mode);
+
+void snd_emu8000_init_fm(emu8000_t *emu);
+
+void snd_emu8000_update_chorus_mode(emu8000_t *emu);
+void snd_emu8000_update_reverb_mode(emu8000_t *emu);
+void snd_emu8000_update_equalizer(emu8000_t *emu);
+int snd_emu8000_load_chorus_fx(emu8000_t *emu, int mode, const void __user *buf, long len);
+int snd_emu8000_load_reverb_fx(emu8000_t *emu, int mode, const void __user *buf, long len);
+
+#endif /* __SOUND_EMU8000_H */
diff --git a/include/sound/emu8000_reg.h b/include/sound/emu8000_reg.h
new file mode 100644
index 000000000000..4b9827ac4960
--- /dev/null
+++ b/include/sound/emu8000_reg.h
@@ -0,0 +1,207 @@
+#ifndef __SOUND_EMU8000_REG_H
+#define __SOUND_EMU8000_REG_H
+/*
+ *  Register operations for the EMU8000
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *
+ *  Based on awe_wave.c by Takashi Iwai
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/*
+ * Data port addresses relative to the EMU base.
+ */
+#define EMU8000_DATA0(e)    ((e)->port1)
+#define EMU8000_DATA1(e)    ((e)->port2)
+#define EMU8000_DATA2(e)    ((e)->port2+2)
+#define EMU8000_DATA3(e)    ((e)->port3)
+#define EMU8000_PTR(e)      ((e)->port3+2)
+
+/*
+ * Make a command from a register and channel.
+ */
+#define EMU8000_CMD(reg, chan) ((reg)<<5 | (chan))
+
+/*
+ * Commands to read and write the EMU8000 registers.
+ * These macros should be used for all register accesses.
+ */
+#define EMU8000_CPF_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_PTRX_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(1, (chan)))
+#define EMU8000_CVCF_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_VTFT_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_PSST_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_CSL_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_CCCA_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_HWCF4_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 9))
+#define EMU8000_HWCF5_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 10))
+#define EMU8000_HWCF6_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 13))
+#define EMU8000_SMALR_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 20))
+#define EMU8000_SMARR_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 21))
+#define EMU8000_SMALW_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 22))
+#define EMU8000_SMARW_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 23))
+#define EMU8000_SMLD_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 26))
+#define EMU8000_SMRD_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 26))
+#define EMU8000_WC_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 27))
+#define EMU8000_HWCF1_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 29))
+#define EMU8000_HWCF2_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 30))
+#define EMU8000_HWCF3_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 31))
+#define EMU8000_INIT1_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_INIT2_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_INIT3_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_INIT4_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_ENVVOL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_DCYSUSV_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(5, (chan)))
+#define EMU8000_ENVVAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_DCYSUS_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_ATKHLDV_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_LFO1VAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(5, (chan)))
+#define EMU8000_ATKHLD_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_LFO2VAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_IP_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_IFATN_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(1, (chan)))
+#define EMU8000_PEFE_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_FMMOD_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_TREMFRQ_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_FM2FRQ2_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(5, (chan)))
+
+
+#define EMU8000_CPF_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_PTRX_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(1, (chan)), (val))
+#define EMU8000_CVCF_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_VTFT_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_PSST_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_CSL_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_CCCA_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_HWCF4_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 9), (val))
+#define EMU8000_HWCF5_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 10), (val))
+#define EMU8000_HWCF6_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 13), (val))
+/* this register is not documented */
+#define EMU8000_HWCF7_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 14), (val))
+#define EMU8000_SMALR_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 20), (val))
+#define EMU8000_SMARR_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 21), (val))
+#define EMU8000_SMALW_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 22), (val))
+#define EMU8000_SMARW_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 23), (val))
+#define EMU8000_SMLD_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 26), (val))
+#define EMU8000_SMRD_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 26), (val))
+#define EMU8000_WC_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 27), (val))
+#define EMU8000_HWCF1_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 29), (val))
+#define EMU8000_HWCF2_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 30), (val))
+#define EMU8000_HWCF3_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 31), (val))
+#define EMU8000_INIT1_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_INIT2_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_INIT3_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_INIT4_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_ENVVOL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_DCYSUSV_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(5, (chan)), (val))
+#define EMU8000_ENVVAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_DCYSUS_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_ATKHLDV_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_LFO1VAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(5, (chan)), (val))
+#define EMU8000_ATKHLD_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_LFO2VAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_IP_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_IFATN_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(1, (chan)), (val))
+#define EMU8000_PEFE_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_FMMOD_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_TREMFRQ_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_FM2FRQ2_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(5, (chan)), (val))
+
+#define EMU8000_0080_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_00A0_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(5, (chan)), (val))
+
+#endif /* __SOUND_EMU8000_REG_H */
diff --git a/include/sound/emux_legacy.h b/include/sound/emux_legacy.h
new file mode 100644
index 000000000000..6fe3da2a5e15
--- /dev/null
+++ b/include/sound/emux_legacy.h
@@ -0,0 +1,146 @@
+#ifndef __SOUND_EMUX_LEGACY_H
+#define __SOUND_EMUX_LEGACY_H
+
+/*
+ *  Copyright (c) 1999-2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *  Definitions of OSS compatible headers for Emu8000 device informations
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "seq_oss_legacy.h"
+
+/*
+ * awe hardware controls
+ */
+
+#define _EMUX_OSS_DEBUG_MODE		0x00
+#define _EMUX_OSS_REVERB_MODE		0x01
+#define _EMUX_OSS_CHORUS_MODE		0x02
+#define _EMUX_OSS_REMOVE_LAST_SAMPLES	0x03
+#define _EMUX_OSS_INITIALIZE_CHIP	0x04
+#define _EMUX_OSS_SEND_EFFECT		0x05
+#define _EMUX_OSS_TERMINATE_CHANNEL	0x06
+#define _EMUX_OSS_TERMINATE_ALL		0x07
+#define _EMUX_OSS_INITIAL_VOLUME	0x08
+#define _EMUX_OSS_INITIAL_ATTEN	_EMUX_OSS_INITIAL_VOLUME
+#define _EMUX_OSS_RESET_CHANNEL		0x09
+#define _EMUX_OSS_CHANNEL_MODE		0x0a
+#define _EMUX_OSS_DRUM_CHANNELS		0x0b
+#define _EMUX_OSS_MISC_MODE		0x0c
+#define _EMUX_OSS_RELEASE_ALL		0x0d
+#define _EMUX_OSS_NOTEOFF_ALL		0x0e
+#define _EMUX_OSS_CHN_PRESSURE		0x0f
+#define _EMUX_OSS_EQUALIZER		0x11
+
+#define _EMUX_OSS_MODE_FLAG		0x80
+#define _EMUX_OSS_COOKED_FLAG		0x40	/* not supported */
+#define _EMUX_OSS_MODE_VALUE_MASK	0x3F
+
+
+/*
+ * mode type definitions
+ */
+enum {
+/* 0*/	EMUX_MD_EXCLUSIVE_OFF,	/* obsolete */
+/* 1*/	EMUX_MD_EXCLUSIVE_ON,	/* obsolete */
+/* 2*/	EMUX_MD_VERSION,		/* read only */
+/* 3*/	EMUX_MD_EXCLUSIVE_SOUND,	/* 0/1: exclusive note on (default=1) */
+/* 4*/	EMUX_MD_REALTIME_PAN,	/* 0/1: do realtime pan change (default=1) */
+/* 5*/	EMUX_MD_GUS_BANK,	/* bank number for GUS patches (default=0) */
+/* 6*/	EMUX_MD_KEEP_EFFECT,	/* 0/1: keep effect values, (default=0) */
+/* 7*/	EMUX_MD_ZERO_ATTEN,	/* attenuation of max volume (default=32) */
+/* 8*/	EMUX_MD_CHN_PRIOR,	/* 0/1: set MIDI channel priority mode (default=1) */
+/* 9*/	EMUX_MD_MOD_SENSE,	/* integer: modwheel sensitivity (def=18) */
+/*10*/	EMUX_MD_DEF_PRESET,	/* integer: default preset number (def=0) */
+/*11*/	EMUX_MD_DEF_BANK,	/* integer: default bank number (def=0) */
+/*12*/	EMUX_MD_DEF_DRUM,	/* integer: default drumset number (def=0) */
+/*13*/	EMUX_MD_TOGGLE_DRUM_BANK, /* 0/1: toggle drum flag with bank# (def=0) */
+/*14*/	EMUX_MD_NEW_VOLUME_CALC,	/* 0/1: volume calculation mode (def=1) */
+/*15*/	EMUX_MD_CHORUS_MODE,	/* integer: chorus mode (def=2) */
+/*16*/	EMUX_MD_REVERB_MODE,	/* integer: chorus mode (def=4) */
+/*17*/	EMUX_MD_BASS_LEVEL,	/* integer: bass level (def=5) */
+/*18*/	EMUX_MD_TREBLE_LEVEL,	/* integer: treble level (def=9) */
+/*19*/	EMUX_MD_DEBUG_MODE,	/* integer: debug level (def=0) */
+/*20*/	EMUX_MD_PAN_EXCHANGE,	/* 0/1: exchange panning direction (def=0) */
+	EMUX_MD_END,
+};
+
+
+/*
+ * effect parameters
+ */
+enum {
+
+/* modulation envelope parameters */
+/* 0*/	EMUX_FX_ENV1_DELAY,	/* WORD: ENVVAL */
+/* 1*/	EMUX_FX_ENV1_ATTACK,	/* BYTE: up ATKHLD */
+/* 2*/	EMUX_FX_ENV1_HOLD,	/* BYTE: lw ATKHLD */
+/* 3*/	EMUX_FX_ENV1_DECAY,	/* BYTE: lw DCYSUS */
+/* 4*/	EMUX_FX_ENV1_RELEASE,	/* BYTE: lw DCYSUS */
+/* 5*/	EMUX_FX_ENV1_SUSTAIN,	/* BYTE: up DCYSUS */
+/* 6*/	EMUX_FX_ENV1_PITCH,	/* BYTE: up PEFE */
+/* 7*/	EMUX_FX_ENV1_CUTOFF,	/* BYTE: lw PEFE */
+
+/* volume envelope parameters */
+/* 8*/	EMUX_FX_ENV2_DELAY,	/* WORD: ENVVOL */
+/* 9*/	EMUX_FX_ENV2_ATTACK,	/* BYTE: up ATKHLDV */
+/*10*/	EMUX_FX_ENV2_HOLD,	/* BYTE: lw ATKHLDV */
+/*11*/	EMUX_FX_ENV2_DECAY,	/* BYTE: lw DCYSUSV */
+/*12*/	EMUX_FX_ENV2_RELEASE,	/* BYTE: lw DCYSUSV */
+/*13*/	EMUX_FX_ENV2_SUSTAIN,	/* BYTE: up DCYSUSV */
+	
+/* LFO1 (tremolo & vibrato) parameters */
+/*14*/	EMUX_FX_LFO1_DELAY,	/* WORD: LFO1VAL */
+/*15*/	EMUX_FX_LFO1_FREQ,	/* BYTE: lo TREMFRQ */
+/*16*/	EMUX_FX_LFO1_VOLUME,	/* BYTE: up TREMFRQ */
+/*17*/	EMUX_FX_LFO1_PITCH,	/* BYTE: up FMMOD */
+/*18*/	EMUX_FX_LFO1_CUTOFF,	/* BYTE: lo FMMOD */
+
+/* LFO2 (vibrato) parameters */
+/*19*/	EMUX_FX_LFO2_DELAY,	/* WORD: LFO2VAL */
+/*20*/	EMUX_FX_LFO2_FREQ,	/* BYTE: lo FM2FRQ2 */
+/*21*/	EMUX_FX_LFO2_PITCH,	/* BYTE: up FM2FRQ2 */
+
+/* Other overall effect parameters */
+/*22*/	EMUX_FX_INIT_PITCH,	/* SHORT: pitch offset */
+/*23*/	EMUX_FX_CHORUS,		/* BYTE: chorus effects send (0-255) */
+/*24*/	EMUX_FX_REVERB,		/* BYTE: reverb effects send (0-255) */
+/*25*/	EMUX_FX_CUTOFF,		/* BYTE: up IFATN */
+/*26*/	EMUX_FX_FILTERQ,		/* BYTE: up CCCA */
+
+/* Sample / loop offset changes */
+/*27*/	EMUX_FX_SAMPLE_START,	/* SHORT: offset */
+/*28*/	EMUX_FX_LOOP_START,	/* SHORT: offset */
+/*29*/	EMUX_FX_LOOP_END,	/* SHORT: offset */
+/*30*/	EMUX_FX_COARSE_SAMPLE_START,	/* SHORT: upper word offset */
+/*31*/	EMUX_FX_COARSE_LOOP_START,	/* SHORT: upper word offset */
+/*32*/	EMUX_FX_COARSE_LOOP_END,		/* SHORT: upper word offset */
+/*33*/	EMUX_FX_ATTEN,		/* BYTE: lo IFATN */
+
+	EMUX_FX_END,
+};
+/* number of effects */
+#define EMUX_NUM_EFFECTS  EMUX_FX_END
+
+/* effect flag values */
+#define EMUX_FX_FLAG_OFF	0
+#define EMUX_FX_FLAG_SET	1
+#define EMUX_FX_FLAG_ADD	2
+
+
+#endif /* __SOUND_EMUX_LEGACY_H */
diff --git a/include/sound/emux_synth.h b/include/sound/emux_synth.h
new file mode 100644
index 000000000000..c6970aac9bdc
--- /dev/null
+++ b/include/sound/emux_synth.h
@@ -0,0 +1,243 @@
+#ifndef __SOUND_EMUX_SYNTH_H
+#define __SOUND_EMUX_SYNTH_H
+
+/*
+ *  Defines for the Emu-series WaveTable chip
+ *
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "seq_kernel.h"
+#include "seq_device.h"
+#include "soundfont.h"
+#include "seq_midi_emul.h"
+#ifdef CONFIG_SND_SEQUENCER_OSS
+#include "seq_oss.h"
+#endif
+#include "emux_legacy.h"
+#include "seq_virmidi.h"
+
+/*
+ * compile flags
+ */
+#define SNDRV_EMUX_USE_RAW_EFFECT
+
+
+/*
+ * typedefs
+ */
+typedef struct snd_emux_effect_table snd_emux_effect_table_t;
+typedef struct snd_emux_port snd_emux_port_t;
+typedef struct snd_emux_voice snd_emux_voice_t;
+typedef struct snd_emux snd_emux_t;
+
+
+/*
+ * operators
+ */
+typedef struct snd_emux_operators {
+	struct module *owner;
+	snd_emux_voice_t *(*get_voice)(snd_emux_t *emu, snd_emux_port_t *port);
+	int (*prepare)(snd_emux_voice_t *vp);
+	void (*trigger)(snd_emux_voice_t *vp);
+	void (*release)(snd_emux_voice_t *vp);
+	void (*update)(snd_emux_voice_t *vp, int update);
+	void (*terminate)(snd_emux_voice_t *vp);
+	void (*free_voice)(snd_emux_voice_t *vp);
+	void (*reset)(snd_emux_t *emu, int ch);
+	/* the first parameters are snd_emux_t */
+	int (*sample_new)(snd_emux_t *emu, snd_sf_sample_t *sp, snd_util_memhdr_t *hdr, const void __user *data, long count);
+	int (*sample_free)(snd_emux_t *emu, snd_sf_sample_t *sp, snd_util_memhdr_t *hdr);
+	void (*sample_reset)(snd_emux_t *emu);
+	int (*load_fx)(snd_emux_t *emu, int type, int arg, const void __user *data, long count);
+	void (*sysex)(snd_emux_t *emu, char *buf, int len, int parsed, snd_midi_channel_set_t *chset);
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	int (*oss_ioctl)(snd_emux_t *emu, int cmd, int p1, int p2);
+#endif
+} snd_emux_operators_t;
+
+
+/*
+ * constant values
+ */
+#define SNDRV_EMUX_MAX_PORTS		32	/* max # of sequencer ports */
+#define SNDRV_EMUX_MAX_VOICES		64	/* max # of voices */
+#define SNDRV_EMUX_MAX_MULTI_VOICES	16	/* max # of playable voices
+						 * simultineously
+						 */
+
+/*
+ * flags
+ */
+#define SNDRV_EMUX_ACCEPT_ROM		(1<<0)
+
+/*
+ * emuX wavetable
+ */
+struct snd_emux {
+
+	snd_card_t *card;	/* assigned card */
+
+	/* following should be initialized before registration */
+	int max_voices;		/* Number of voices */
+	int mem_size;		/* memory size (in byte) */
+	int num_ports;		/* number of ports to be created */
+	int pitch_shift;	/* pitch shift value (for Emu10k1) */
+	snd_emux_operators_t ops;	/* operators */
+	void *hw;		/* hardware */
+	unsigned long flags;	/* other conditions */
+	int midi_ports;		/* number of virtual midi devices */
+	int midi_devidx;	/* device offset of virtual midi */
+	unsigned int linear_panning: 1; /* panning is linear (sbawe = 1, emu10k1 = 0) */
+	int hwdep_idx;		/* hwdep device index */
+	snd_hwdep_t *hwdep;	/* hwdep device */
+
+	/* private */
+	int num_voices;		/* current number of voices */
+	snd_sf_list_t *sflist;	/* root of SoundFont list */
+	snd_emux_voice_t *voices;	/* Voices (EMU 'channel') */
+	int use_time;	/* allocation counter */
+	spinlock_t voice_lock;	/* Lock for voice access */
+	struct semaphore register_mutex;
+	int client;		/* For the sequencer client */
+	int ports[SNDRV_EMUX_MAX_PORTS];	/* The ports for this device */
+	snd_emux_port_t *portptrs[SNDRV_EMUX_MAX_PORTS];
+	int used;	/* use counter */
+	char *name;	/* name of the device (internal) */
+	snd_rawmidi_t **vmidi;
+	struct timer_list tlist;	/* for pending note-offs */
+	int timer_active;
+
+	snd_util_memhdr_t *memhdr;	/* memory chunk information */
+
+#ifdef CONFIG_PROC_FS
+	snd_info_entry_t *proc;
+#endif
+
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	snd_seq_device_t *oss_synth;
+#endif
+};
+
+
+/*
+ * sequencer port information
+ */
+struct snd_emux_port {
+
+	snd_midi_channel_set_t chset;
+	snd_emux_t *emu;
+
+	char port_mode;			/* operation mode */
+	int volume_atten;		/* emuX raw attenuation */
+	unsigned long drum_flags;	/* drum bitmaps */
+	int ctrls[EMUX_MD_END];		/* control parameters */
+#ifdef SNDRV_EMUX_USE_RAW_EFFECT
+	snd_emux_effect_table_t *effect;
+#endif
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	snd_seq_oss_arg_t *oss_arg;
+#endif
+};
+
+/* port_mode */
+#define SNDRV_EMUX_PORT_MODE_MIDI		0	/* normal MIDI port */
+#define SNDRV_EMUX_PORT_MODE_OSS_SYNTH	1	/* OSS synth port */
+#define SNDRV_EMUX_PORT_MODE_OSS_MIDI	2	/* OSS multi channel synth port */
+
+/*
+ * A structure to keep track of each hardware voice
+ */
+struct snd_emux_voice {
+	int  ch;		/* Hardware channel number */
+
+	int  state;		/* status */
+#define SNDRV_EMUX_ST_OFF		0x00	/* Not playing, and inactive */
+#define SNDRV_EMUX_ST_ON		0x01	/* Note on */
+#define SNDRV_EMUX_ST_RELEASED 	(0x02|SNDRV_EMUX_ST_ON)	/* Note released */
+#define SNDRV_EMUX_ST_SUSTAINED	(0x04|SNDRV_EMUX_ST_ON)	/* Note sustained */
+#define SNDRV_EMUX_ST_STANDBY	(0x08|SNDRV_EMUX_ST_ON)	/* Waiting to be triggered */
+#define SNDRV_EMUX_ST_PENDING 	(0x10|SNDRV_EMUX_ST_ON)	/* Note will be released */
+#define SNDRV_EMUX_ST_LOCKED		0x100	/* Not accessible */
+
+	unsigned int  time;	/* An allocation time */
+	unsigned char note;	/* Note currently assigned to this voice */
+	unsigned char key;
+	unsigned char velocity;	/* Velocity of current note */
+
+	snd_sf_zone_t *zone;	/* Zone assigned to this note */
+	void *block;		/* sample block pointer (optional) */
+	snd_midi_channel_t *chan;	/* Midi channel for this note */
+	snd_emux_port_t *port;	/* associated port */
+	snd_emux_t *emu;	/* assigned root info */
+	void *hw;		/* hardware pointer (emu8000_t or emu10k1_t) */
+	unsigned long ontime;	/* jiffies at note triggered */
+	
+	/* Emu8k/Emu10k1 registers */
+	soundfont_voice_info_t reg;
+
+	/* additional registers */
+	int avol;		/* volume attenuation */
+	int acutoff;		/* cutoff target */
+	int apitch;		/* pitch offset */
+	int apan;		/* pan/aux pair */
+	int aaux;
+	int ptarget;		/* pitch target */
+	int vtarget;		/* volume target */
+	int ftarget;		/* filter target */
+
+};
+
+/*
+ * update flags (can be combined)
+ */
+#define SNDRV_EMUX_UPDATE_VOLUME		(1<<0)
+#define SNDRV_EMUX_UPDATE_PITCH		(1<<1)
+#define SNDRV_EMUX_UPDATE_PAN		(1<<2)
+#define SNDRV_EMUX_UPDATE_FMMOD		(1<<3)
+#define SNDRV_EMUX_UPDATE_TREMFREQ	(1<<4)
+#define SNDRV_EMUX_UPDATE_FM2FRQ2		(1<<5)
+#define SNDRV_EMUX_UPDATE_Q		(1<<6)
+
+
+#ifdef SNDRV_EMUX_USE_RAW_EFFECT
+/*
+ * effect table
+ */
+struct snd_emux_effect_table {
+	/* Emu8000 specific effects */
+	short val[EMUX_NUM_EFFECTS];
+	unsigned char flag[EMUX_NUM_EFFECTS];
+};
+#endif /* SNDRV_EMUX_USE_RAW_EFFECT */
+
+
+/*
+ * prototypes - interface to Emu10k1 and Emu8k routines
+ */
+int snd_emux_new(snd_emux_t **remu);
+int snd_emux_register(snd_emux_t *emu, snd_card_t *card, int index, char *name);
+int snd_emux_free(snd_emux_t *emu);
+
+/*
+ * exported functions
+ */
+void snd_emux_terminate_all(snd_emux_t *emu);
+void snd_emux_lock_voice(snd_emux_t *emu, int voice);
+void snd_emux_unlock_voice(snd_emux_t *emu, int voice);
+
+#endif /* __SOUND_EMUX_SYNTH_H */
diff --git a/include/sound/es1688.h b/include/sound/es1688.h
new file mode 100644
index 000000000000..604f495bc8b1
--- /dev/null
+++ b/include/sound/es1688.h
@@ -0,0 +1,123 @@
+#ifndef __SOUND_ES1688_H
+#define __SOUND_ES1688_H
+
+/*
+ *  Header file for ES488/ES1688
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "control.h"
+#include "pcm.h"
+#include <linux/interrupt.h>
+
+#define ES1688_HW_AUTO		0x0000
+#define ES1688_HW_688		0x0001
+#define ES1688_HW_1688		0x0002
+
+struct _snd_es1688 {
+	unsigned long port;		/* port of ESS chip */
+	struct resource *res_port;
+	unsigned long mpu_port;		/* MPU-401 port of ESS chip */
+	int irq;			/* IRQ number of ESS chip */
+	int mpu_irq;			/* MPU IRQ */
+	int dma8;			/* 8-bit DMA */
+	unsigned short version;		/* version of ESS chip */
+	unsigned short hardware;	/* see to ES1688_HW_XXXX */
+
+	unsigned short trigger_value;
+	unsigned char pad;
+	unsigned int dma_size;
+
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+
+	spinlock_t reg_lock;
+	spinlock_t mixer_lock;
+};
+
+typedef struct _snd_es1688 es1688_t;
+
+/* I/O ports */
+
+#define ES1688P(codec, x) ((codec)->port + e_s_s_ESS1688##x)
+
+#define e_s_s_ESS1688RESET	0x6
+#define e_s_s_ESS1688READ	0xa
+#define e_s_s_ESS1688WRITE	0xc
+#define e_s_s_ESS1688COMMAND	0xc
+#define e_s_s_ESS1688STATUS	0xc
+#define e_s_s_ESS1688DATA_AVAIL	0xe
+#define e_s_s_ESS1688DATA_AVAIL_16 0xf
+#define e_s_s_ESS1688MIXER_ADDR	0x4
+#define e_s_s_ESS1688MIXER_DATA	0x5
+#define e_s_s_ESS1688OPL3_LEFT	0x0
+#define e_s_s_ESS1688OPL3_RIGHT	0x2
+#define e_s_s_ESS1688OPL3_BOTH	0x8
+#define e_s_s_ESS1688ENABLE0	0x0
+#define e_s_s_ESS1688ENABLE1	0x9
+#define e_s_s_ESS1688ENABLE2	0xb
+#define e_s_s_ESS1688INIT1	0x7
+
+#define ES1688_DSP_CMD_DMAOFF	0xd0
+#define ES1688_DSP_CMD_SPKON	0xd1
+#define ES1688_DSP_CMD_SPKOFF	0xd3
+#define ES1688_DSP_CMD_DMAON	0xd4
+
+#define ES1688_PCM_DEV		0x14
+#define ES1688_MIC_DEV		0x1a
+#define ES1688_REC_DEV		0x1c
+#define ES1688_MASTER_DEV	0x32
+#define ES1688_FM_DEV		0x36
+#define ES1688_CD_DEV		0x38
+#define ES1688_AUX_DEV		0x3a
+#define ES1688_SPEAKER_DEV	0x3c
+#define ES1688_LINE_DEV		0x3e
+#define ES1688_RECLEV_DEV	0xb4
+
+#define ES1688_MIXS_MASK	0x17
+#define ES1688_MIXS_MIC		0x00
+#define ES1688_MIXS_MIC_MASTER	0x01
+#define ES1688_MIXS_CD		0x02
+#define ES1688_MIXS_AOUT	0x03
+#define ES1688_MIXS_MIC1	0x04
+#define ES1688_MIXS_REC_MIX	0x05
+#define ES1688_MIXS_LINE	0x06
+#define ES1688_MIXS_MASTER	0x07
+#define ES1688_MIXS_MUTE	0x10
+
+/*
+
+ */
+
+void snd_es1688_mixer_write(es1688_t *chip, unsigned char reg, unsigned char data);
+
+int snd_es1688_create(snd_card_t * card,
+		      unsigned long port,
+		      unsigned long mpu_port,
+		      int irq,
+		      int mpu_irq,
+		      int dma8,
+		      unsigned short hardware,
+		      es1688_t ** rchip);
+int snd_es1688_pcm(es1688_t *chip, int device, snd_pcm_t ** rpcm);
+int snd_es1688_mixer(es1688_t *chip);
+
+#endif /* __SOUND_ES1688_H */
diff --git a/include/sound/gus.h b/include/sound/gus.h
new file mode 100644
index 000000000000..8b6287a6fff5
--- /dev/null
+++ b/include/sound/gus.h
@@ -0,0 +1,718 @@
+#ifndef __SOUND_GUS_H
+#define __SOUND_GUS_H
+
+/*
+ *  Global structures used for GUS part of ALSA driver
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include "timer.h"
+#include "seq_midi_emul.h"
+#include "seq_device.h"
+#include "ainstr_iw.h"
+#include "ainstr_gf1.h"
+#include "ainstr_simple.h"
+#include <asm/io.h>
+
+#define SNDRV_SEQ_DEV_ID_GUS			"gus-synth"
+
+/* IO ports */
+
+#define GUSP(gus, x)			((gus)->gf1.port + SNDRV_g_u_s_##x)
+
+#define SNDRV_g_u_s_MIDICTRL		(0x320-0x220)
+#define SNDRV_g_u_s_MIDISTAT		(0x320-0x220)
+#define SNDRV_g_u_s_MIDIDATA		(0x321-0x220)
+
+#define SNDRV_g_u_s_GF1PAGE		(0x322-0x220)
+#define SNDRV_g_u_s_GF1REGSEL		(0x323-0x220)
+#define SNDRV_g_u_s_GF1DATALOW		(0x324-0x220)
+#define SNDRV_g_u_s_GF1DATAHIGH		(0x325-0x220)
+#define SNDRV_g_u_s_IRQSTAT		(0x226-0x220)
+#define SNDRV_g_u_s_TIMERCNTRL		(0x228-0x220)
+#define SNDRV_g_u_s_TIMERDATA		(0x229-0x220)
+#define SNDRV_g_u_s_DRAM			(0x327-0x220)
+#define SNDRV_g_u_s_MIXCNTRLREG		(0x220-0x220)
+#define SNDRV_g_u_s_IRQDMACNTRLREG	(0x22b-0x220)
+#define SNDRV_g_u_s_REGCNTRLS		(0x22f-0x220)
+#define SNDRV_g_u_s_BOARDVERSION		(0x726-0x220)
+#define SNDRV_g_u_s_MIXCNTRLPORT		(0x726-0x220)
+#define SNDRV_g_u_s_IVER			(0x325-0x220)
+#define SNDRV_g_u_s_MIXDATAPORT		(0x326-0x220)
+#define SNDRV_g_u_s_MAXCNTRLPORT		(0x326-0x220)
+
+/* GF1 registers */
+
+/* global registers */
+#define SNDRV_GF1_GB_ACTIVE_VOICES		0x0e
+#define SNDRV_GF1_GB_VOICES_IRQ			0x0f
+#define SNDRV_GF1_GB_GLOBAL_MODE			0x19
+#define SNDRV_GF1_GW_LFO_BASE			0x1a
+#define SNDRV_GF1_GB_VOICES_IRQ_READ		0x1f
+#define SNDRV_GF1_GB_DRAM_DMA_CONTROL		0x41
+#define SNDRV_GF1_GW_DRAM_DMA_LOW			0x42
+#define SNDRV_GF1_GW_DRAM_IO_LOW			0x43
+#define SNDRV_GF1_GB_DRAM_IO_HIGH			0x44
+#define SNDRV_GF1_GB_SOUND_BLASTER_CONTROL	0x45
+#define SNDRV_GF1_GB_ADLIB_TIMER_1		0x46
+#define SNDRV_GF1_GB_ADLIB_TIMER_2		0x47
+#define SNDRV_GF1_GB_RECORD_RATE			0x48
+#define SNDRV_GF1_GB_REC_DMA_CONTROL		0x49
+#define SNDRV_GF1_GB_JOYSTICK_DAC_LEVEL		0x4b
+#define SNDRV_GF1_GB_RESET			0x4c
+#define SNDRV_GF1_GB_DRAM_DMA_HIGH		0x50
+#define SNDRV_GF1_GW_DRAM_IO16			0x51
+#define SNDRV_GF1_GW_MEMORY_CONFIG		0x52
+#define SNDRV_GF1_GB_MEMORY_CONTROL		0x53
+#define SNDRV_GF1_GW_FIFO_RECORD_BASE_ADDR	0x54
+#define SNDRV_GF1_GW_FIFO_PLAY_BASE_ADDR		0x55
+#define SNDRV_GF1_GW_FIFO_SIZE			0x56
+#define SNDRV_GF1_GW_INTERLEAVE			0x57
+#define SNDRV_GF1_GB_COMPATIBILITY		0x59
+#define SNDRV_GF1_GB_DECODE_CONTROL		0x5a
+#define SNDRV_GF1_GB_VERSION_NUMBER		0x5b
+#define SNDRV_GF1_GB_MPU401_CONTROL_A		0x5c
+#define SNDRV_GF1_GB_MPU401_CONTROL_B		0x5d
+#define SNDRV_GF1_GB_EMULATION_IRQ		0x60
+/* voice specific registers */
+#define SNDRV_GF1_VB_ADDRESS_CONTROL		0x00
+#define SNDRV_GF1_VW_FREQUENCY			0x01
+#define SNDRV_GF1_VW_START_HIGH			0x02
+#define SNDRV_GF1_VW_START_LOW			0x03
+#define SNDRV_GF1_VA_START			SNDRV_GF1_VW_START_HIGH
+#define SNDRV_GF1_VW_END_HIGH			0x04
+#define SNDRV_GF1_VW_END_LOW			0x05
+#define SNDRV_GF1_VA_END				SNDRV_GF1_VW_END_HIGH
+#define SNDRV_GF1_VB_VOLUME_RATE			0x06
+#define SNDRV_GF1_VB_VOLUME_START			0x07
+#define SNDRV_GF1_VB_VOLUME_END			0x08
+#define SNDRV_GF1_VW_VOLUME			0x09
+#define SNDRV_GF1_VW_CURRENT_HIGH			0x0a
+#define SNDRV_GF1_VW_CURRENT_LOW			0x0b
+#define SNDRV_GF1_VA_CURRENT			SNDRV_GF1_VW_CURRENT_HIGH
+#define SNDRV_GF1_VB_PAN				0x0c
+#define SNDRV_GF1_VW_OFFSET_RIGHT			0x0c
+#define SNDRV_GF1_VB_VOLUME_CONTROL		0x0d
+#define SNDRV_GF1_VB_UPPER_ADDRESS		0x10
+#define SNDRV_GF1_VW_EFFECT_HIGH			0x11
+#define SNDRV_GF1_VW_EFFECT_LOW			0x12
+#define SNDRV_GF1_VA_EFFECT			SNDRV_GF1_VW_EFFECT_HIGH
+#define SNDRV_GF1_VW_OFFSET_LEFT			0x13
+#define SNDRV_GF1_VB_ACCUMULATOR			0x14
+#define SNDRV_GF1_VB_MODE				0x15
+#define SNDRV_GF1_VW_EFFECT_VOLUME		0x16
+#define SNDRV_GF1_VB_FREQUENCY_LFO		0x17
+#define SNDRV_GF1_VB_VOLUME_LFO			0x18
+#define SNDRV_GF1_VW_OFFSET_RIGHT_FINAL		0x1b
+#define SNDRV_GF1_VW_OFFSET_LEFT_FINAL		0x1c
+#define SNDRV_GF1_VW_EFFECT_VOLUME_FINAL		0x1d
+
+/* ICS registers */
+
+#define SNDRV_ICS_MIC_DEV		0
+#define SNDRV_ICS_LINE_DEV	1
+#define SNDRV_ICS_CD_DEV		2
+#define SNDRV_ICS_GF1_DEV		3
+#define SNDRV_ICS_NONE_DEV	4
+#define SNDRV_ICS_MASTER_DEV	5
+
+/* LFO */
+
+#define SNDRV_LFO_TREMOLO		0
+#define SNDRV_LFO_VIBRATO		1
+
+/* misc */
+
+#define SNDRV_GF1_DMA_UNSIGNED	0x80
+#define SNDRV_GF1_DMA_16BIT	0x40
+#define SNDRV_GF1_DMA_IRQ		0x20
+#define SNDRV_GF1_DMA_WIDTH16	0x04
+#define SNDRV_GF1_DMA_READ	0x02	/* read from GUS's DRAM */
+#define SNDRV_GF1_DMA_ENABLE	0x01
+
+/* ramp ranges */
+
+#define SNDRV_GF1_ATTEN(x)	(snd_gf1_atten_table[x])
+#define SNDRV_GF1_MIN_VOLUME	1800
+#define SNDRV_GF1_MAX_VOLUME	4095
+#define SNDRV_GF1_MIN_OFFSET	(SNDRV_GF1_MIN_VOLUME>>4)
+#define SNDRV_GF1_MAX_OFFSET	255
+#define SNDRV_GF1_MAX_TDEPTH	90
+
+/* defines for memory manager */
+
+#define SNDRV_GF1_MEM_BLOCK_16BIT		0x0001
+
+#define SNDRV_GF1_MEM_OWNER_DRIVER	0x0001
+#define SNDRV_GF1_MEM_OWNER_WAVE_SIMPLE	0x0002
+#define SNDRV_GF1_MEM_OWNER_WAVE_GF1	0x0003
+#define SNDRV_GF1_MEM_OWNER_WAVE_IWFFFF	0x0004
+
+/* constants for interrupt handlers */
+
+#define SNDRV_GF1_HANDLER_MIDI_OUT	0x00010000
+#define SNDRV_GF1_HANDLER_MIDI_IN		0x00020000
+#define SNDRV_GF1_HANDLER_TIMER1		0x00040000
+#define SNDRV_GF1_HANDLER_TIMER2		0x00080000
+#define SNDRV_GF1_HANDLER_VOICE		0x00100000
+#define SNDRV_GF1_HANDLER_DMA_WRITE	0x00200000
+#define SNDRV_GF1_HANDLER_DMA_READ	0x00400000
+#define SNDRV_GF1_HANDLER_ALL		(0xffff0000&~SNDRV_GF1_HANDLER_VOICE)
+
+/* constants for DMA flags */
+
+#define SNDRV_GF1_DMA_TRIGGER		1
+
+/* --- */
+
+struct _snd_gus_card;
+typedef struct _snd_gus_card snd_gus_card_t;
+
+/* GF1 specific structure */
+
+typedef struct _snd_gf1_bank_info {
+	unsigned int address;
+	unsigned int size;
+} snd_gf1_bank_info_t;
+
+typedef struct _snd_gf1_mem_block {
+	unsigned short flags;	/* flags - SNDRV_GF1_MEM_BLOCK_XXXX */
+	unsigned short owner;	/* owner - SNDRV_GF1_MEM_OWNER_XXXX */
+	unsigned int share;	/* share count */
+	unsigned int share_id[4]; /* share ID */
+	unsigned int ptr;
+	unsigned int size;
+	char *name;
+	struct _snd_gf1_mem_block *next;
+	struct _snd_gf1_mem_block *prev;
+} snd_gf1_mem_block_t;
+
+typedef struct _snd_gf1_mem {
+	snd_gf1_bank_info_t banks_8[4];
+	snd_gf1_bank_info_t banks_16[4];
+	snd_gf1_mem_block_t *first;
+	snd_gf1_mem_block_t *last;
+	struct semaphore memory_mutex;
+} snd_gf1_mem_t;
+
+typedef struct snd_gf1_dma_block {
+	void *buffer;		/* buffer in computer's RAM */
+	unsigned long buf_addr;	/* buffer address */
+	unsigned int addr;	/* address in onboard memory */
+	unsigned int count;	/* count in bytes */
+	unsigned int cmd;	/* DMA command (format) */
+	void (*ack)(snd_gus_card_t * gus, void *private_data);
+	void *private_data;
+	struct snd_gf1_dma_block *next;
+} snd_gf1_dma_block_t;
+
+typedef struct {
+	snd_midi_channel_set_t * chset;
+	snd_gus_card_t * gus;
+	int mode;		/* operation mode */
+	int client;		/* sequencer client number */
+	int port;		/* sequencer port number */
+	unsigned int midi_has_voices: 1;
+} snd_gus_port_t;
+
+typedef struct _snd_gus_voice snd_gus_voice_t;
+
+typedef struct {
+	void (*sample_start)(snd_gus_card_t *gus, snd_gus_voice_t *voice, snd_seq_position_t position);
+	void (*sample_stop)(snd_gus_card_t *gus, snd_gus_voice_t *voice, snd_seq_stop_mode_t mode);
+	void (*sample_freq)(snd_gus_card_t *gus, snd_gus_voice_t *voice, snd_seq_frequency_t freq);
+	void (*sample_volume)(snd_gus_card_t *gus, snd_gus_voice_t *voice, snd_seq_ev_volume_t *volume);
+	void (*sample_loop)(snd_gus_card_t *card, snd_gus_voice_t *voice, snd_seq_ev_loop_t *loop);
+	void (*sample_pos)(snd_gus_card_t *card, snd_gus_voice_t *voice, snd_seq_position_t position);
+	void (*sample_private1)(snd_gus_card_t *card, snd_gus_voice_t *voice, unsigned char *data);
+} snd_gus_sample_ops_t;
+
+#define SNDRV_GF1_VOICE_TYPE_PCM		0
+#define SNDRV_GF1_VOICE_TYPE_SYNTH 	1
+#define SNDRV_GF1_VOICE_TYPE_MIDI		2
+
+#define SNDRV_GF1_VFLG_RUNNING		(1<<0)
+#define SNDRV_GF1_VFLG_EFFECT_TIMER1	(1<<1)
+#define SNDRV_GF1_VFLG_PAN		(1<<2)
+
+typedef enum {
+	VENV_BEFORE,
+	VENV_ATTACK,
+	VENV_SUSTAIN,
+	VENV_RELEASE,
+	VENV_DONE,
+	VENV_VOLUME
+} snd_gus_volume_state_t;
+
+struct _snd_gus_voice {
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth:1,
+	    midi: 1;
+	unsigned int flags;
+	unsigned char client;
+	unsigned char port;
+	unsigned char index;
+	unsigned char pad;
+	
+#ifdef CONFIG_SND_DEBUG
+	unsigned int interrupt_stat_wave;
+	unsigned int interrupt_stat_volume;
+#endif
+	void (*handler_wave) (snd_gus_card_t * gus, snd_gus_voice_t * voice);
+	void (*handler_volume) (snd_gus_card_t * gus, snd_gus_voice_t * voice);
+	void (*handler_effect) (snd_gus_card_t * gus, snd_gus_voice_t * voice);
+	void (*volume_change) (snd_gus_card_t * gus);
+
+	snd_gus_sample_ops_t *sample_ops;
+
+	snd_seq_instr_t instr;
+
+	/* running status / registers */
+
+	snd_seq_ev_volume_t sample_volume;
+
+	unsigned short fc_register;
+	unsigned short fc_lfo;
+	unsigned short gf1_volume;
+	unsigned char control;
+	unsigned char mode;
+	unsigned char gf1_pan;
+	unsigned char effect_accumulator;
+	unsigned char volume_control;
+	unsigned char venv_value_next;
+	snd_gus_volume_state_t venv_state;
+	snd_gus_volume_state_t venv_state_prev;
+	unsigned short vlo;
+	unsigned short vro;
+	unsigned short gf1_effect_volume;
+	
+	/* --- */
+
+	void *private_data;
+	void (*private_free)(snd_gus_voice_t *voice);
+};
+
+struct _snd_gf1 {
+
+	unsigned int enh_mode:1,	/* enhanced mode (GFA1) */
+		     hw_lfo:1,		/* use hardware LFO */
+		     sw_lfo:1,		/* use software LFO */
+		     effect:1;		/* use effect voices */
+
+	unsigned long port;		/* port of GF1 chip */
+	struct resource *res_port1;
+	struct resource *res_port2;
+	int irq;			/* IRQ number */
+	int dma1;			/* DMA1 number */
+	int dma2;			/* DMA2 number */
+	unsigned int memory;		/* GUS's DRAM size in bytes */
+	unsigned int rom_memory;	/* GUS's ROM size in bytes */
+	unsigned int rom_present;	/* bitmask */
+	unsigned int rom_banks;		/* GUS's ROM banks */
+
+	snd_gf1_mem_t mem_alloc;
+
+	/* registers */
+	unsigned short reg_page;
+	unsigned short reg_regsel;
+	unsigned short reg_data8;
+	unsigned short reg_data16;
+	unsigned short reg_irqstat;
+	unsigned short reg_dram;
+	unsigned short reg_timerctrl;
+	unsigned short reg_timerdata;
+	unsigned char ics_regs[6][2];
+	/* --------- */
+
+	unsigned char active_voices;	/* active voices */
+	unsigned char active_voice;	/* selected voice (GF1PAGE register) */
+
+	snd_gus_voice_t voices[32];	/* GF1 voices */
+
+	unsigned int default_voice_address;
+
+	unsigned short playback_freq;	/* GF1 playback (mixing) frequency */
+	unsigned short mode;		/* see to SNDRV_GF1_MODE_XXXX */
+	unsigned char volume_ramp;
+	unsigned char smooth_pan;
+	unsigned char full_range_pan;
+	unsigned char pad0;
+
+	unsigned char *lfos;
+
+	/* interrupt handlers */
+
+	void (*interrupt_handler_midi_out) (snd_gus_card_t * gus);
+	void (*interrupt_handler_midi_in) (snd_gus_card_t * gus);
+	void (*interrupt_handler_timer1) (snd_gus_card_t * gus);
+	void (*interrupt_handler_timer2) (snd_gus_card_t * gus);
+	void (*interrupt_handler_dma_write) (snd_gus_card_t * gus);
+	void (*interrupt_handler_dma_read) (snd_gus_card_t * gus);
+
+#ifdef CONFIG_SND_DEBUG
+	unsigned int interrupt_stat_midi_out;
+	unsigned int interrupt_stat_midi_in;
+	unsigned int interrupt_stat_timer1;
+	unsigned int interrupt_stat_timer2;
+	unsigned int interrupt_stat_dma_write;
+	unsigned int interrupt_stat_dma_read;
+	unsigned int interrupt_stat_voice_lost;
+#endif
+
+	/* synthesizer */
+
+	int seq_client;
+	snd_gus_port_t seq_ports[4];
+	snd_seq_kinstr_list_t *ilist;
+	snd_iwffff_ops_t iwffff_ops;
+	snd_gf1_ops_t gf1_ops;
+	snd_simple_ops_t simple_ops;
+
+	/* timer */
+
+	unsigned short timer_enabled;
+	snd_timer_t *timer1;
+	snd_timer_t *timer2;
+
+	/* midi */
+
+	unsigned short uart_cmd;
+	unsigned int uart_framing;
+	unsigned int uart_overrun;
+
+	/* dma operations */
+
+	unsigned int dma_flags;
+	unsigned int dma_shared;
+	snd_gf1_dma_block_t *dma_data_pcm;
+	snd_gf1_dma_block_t *dma_data_pcm_last;
+	snd_gf1_dma_block_t *dma_data_synth;
+	snd_gf1_dma_block_t *dma_data_synth_last;
+	void (*dma_ack)(snd_gus_card_t * gus, void *private_data);
+	void *dma_private_data;
+
+	/* pcm */
+	int pcm_channels;
+	int pcm_alloc_voices;
+        unsigned short pcm_volume_level_left;
+	unsigned short pcm_volume_level_right;
+	unsigned short pcm_volume_level_left1;
+	unsigned short pcm_volume_level_right1;
+                                
+	unsigned char pcm_rcntrl_reg;
+	unsigned char pad_end;
+};
+
+/* main structure for GUS card */
+
+struct _snd_gus_card {
+	snd_card_t *card;
+
+	unsigned int
+	 initialized: 1,		/* resources were initialized */
+	 equal_irq:1,			/* GF1 and CODEC shares IRQ (GUS MAX only) */
+	 equal_dma:1,			/* if dma channels are equal (not valid for daughter board) */
+	 ics_flag:1,			/* have we ICS mixer chip */
+	 ics_flipped:1,			/* ICS mixer have flipped some channels? */
+	 codec_flag:1,			/* have we CODEC chip? */
+	 max_flag:1,			/* have we GUS MAX card? */
+	 max_ctrl_flag:1,		/* have we original GUS MAX card? */
+	 daughter_flag:1,		/* have we daughter board? */
+	 interwave:1,			/* hey - we have InterWave card */
+	 ess_flag:1,			/* ESS chip found... GUS Extreme */
+	 ace_flag:1,			/* GUS ACE detected */
+	 uart_enable:1;			/* enable MIDI UART */
+	unsigned short revision;	/* revision of chip */
+	unsigned short max_cntrl_val;	/* GUS MAX control value */
+	unsigned short mix_cntrl_reg;	/* mixer control register */
+	unsigned short joystick_dac;	/* joystick DAC level */
+	int timer_dev;			/* timer device */
+
+	struct _snd_gf1 gf1;	/* gf1 specific variables */
+	snd_pcm_t *pcm;
+	snd_pcm_substream_t *pcm_cap_substream;
+	unsigned int c_dma_size;
+	unsigned int c_period_size;
+	unsigned int c_pos;
+
+	snd_rawmidi_t *midi_uart;
+	snd_rawmidi_substream_t *midi_substream_output;
+	snd_rawmidi_substream_t *midi_substream_input;
+
+	snd_seq_device_t *seq_dev;
+
+	spinlock_t reg_lock;
+	spinlock_t voice_alloc;
+	spinlock_t active_voice_lock;
+	spinlock_t event_lock;
+	spinlock_t dma_lock;
+	spinlock_t pcm_volume_level_lock;
+	spinlock_t uart_cmd_lock;
+	struct semaphore dma_mutex;
+	struct semaphore register_mutex;
+};
+
+/* I/O functions for GF1/InterWave chip - gus_io.c */
+
+static inline void snd_gf1_select_voice(snd_gus_card_t * gus, int voice)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gus->active_voice_lock, flags);
+	if (voice != gus->gf1.active_voice) {
+		gus->gf1.active_voice = voice;
+		outb(voice, GUSP(gus, GF1PAGE));
+	}
+	spin_unlock_irqrestore(&gus->active_voice_lock, flags);
+}
+
+static inline void snd_gf1_uart_cmd(snd_gus_card_t * gus, unsigned char b)
+{
+	outb(gus->gf1.uart_cmd = b, GUSP(gus, MIDICTRL));
+}
+
+static inline unsigned char snd_gf1_uart_stat(snd_gus_card_t * gus)
+{
+	return inb(GUSP(gus, MIDISTAT));
+}
+
+static inline void snd_gf1_uart_put(snd_gus_card_t * gus, unsigned char b)
+{
+	outb(b, GUSP(gus, MIDIDATA));
+}
+
+static inline unsigned char snd_gf1_uart_get(snd_gus_card_t * gus)
+{
+	return inb(GUSP(gus, MIDIDATA));
+}
+
+extern void snd_gf1_delay(snd_gus_card_t * gus);
+
+extern void snd_gf1_ctrl_stop(snd_gus_card_t * gus, unsigned char reg);
+
+extern void snd_gf1_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data);
+extern unsigned char snd_gf1_look8(snd_gus_card_t * gus, unsigned char reg);
+extern inline unsigned char snd_gf1_read8(snd_gus_card_t * gus, unsigned char reg)
+{
+	return snd_gf1_look8(gus, reg | 0x80);
+}
+extern void snd_gf1_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data);
+extern unsigned short snd_gf1_look16(snd_gus_card_t * gus, unsigned char reg);
+extern inline unsigned short snd_gf1_read16(snd_gus_card_t * gus, unsigned char reg)
+{
+	return snd_gf1_look16(gus, reg | 0x80);
+}
+extern void snd_gf1_adlib_write(snd_gus_card_t * gus, unsigned char reg, unsigned char data);
+extern void snd_gf1_dram_addr(snd_gus_card_t * gus, unsigned int addr);
+extern void snd_gf1_poke(snd_gus_card_t * gus, unsigned int addr, unsigned char data);
+extern unsigned char snd_gf1_peek(snd_gus_card_t * gus, unsigned int addr);
+extern void snd_gf1_pokew(snd_gus_card_t * gus, unsigned int addr, unsigned short data);
+extern unsigned short snd_gf1_peekw(snd_gus_card_t * gus, unsigned int addr);
+extern void snd_gf1_dram_setmem(snd_gus_card_t * gus, unsigned int addr, unsigned short value, unsigned int count);
+extern void snd_gf1_write_addr(snd_gus_card_t * gus, unsigned char reg, unsigned int addr, short w_16bit);
+extern unsigned int snd_gf1_read_addr(snd_gus_card_t * gus, unsigned char reg, short w_16bit);
+extern void snd_gf1_i_ctrl_stop(snd_gus_card_t * gus, unsigned char reg);
+extern void snd_gf1_i_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data);
+extern unsigned char snd_gf1_i_look8(snd_gus_card_t * gus, unsigned char reg);
+extern void snd_gf1_i_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data);
+extern inline unsigned char snd_gf1_i_read8(snd_gus_card_t * gus, unsigned char reg)
+{
+	return snd_gf1_i_look8(gus, reg | 0x80);
+}
+extern unsigned short snd_gf1_i_look16(snd_gus_card_t * gus, unsigned char reg);
+extern inline unsigned short snd_gf1_i_read16(snd_gus_card_t * gus, unsigned char reg)
+{
+	return snd_gf1_i_look16(gus, reg | 0x80);
+}
+extern void snd_gf1_i_adlib_write(snd_gus_card_t * gus, unsigned char reg, unsigned char data);
+extern void snd_gf1_i_write_addr(snd_gus_card_t * gus, unsigned char reg, unsigned int addr, short w_16bit);
+extern unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, unsigned char reg, short w_16bit);
+
+extern void snd_gf1_select_active_voices(snd_gus_card_t * gus);
+
+/* gus_lfo.c */
+
+struct _SND_IW_LFO_PROGRAM {
+	unsigned short freq_and_control;
+	unsigned char depth_final;
+	unsigned char depth_inc;
+	unsigned short twave;
+	unsigned short depth;
+};
+
+#if 0
+extern irqreturn_t snd_gf1_lfo_effect_interrupt(snd_gus_card_t * gus, snd_gf1_voice_t * voice);
+#endif
+extern void snd_gf1_lfo_init(snd_gus_card_t * gus);
+extern void snd_gf1_lfo_done(snd_gus_card_t * gus);
+extern void snd_gf1_lfo_program(snd_gus_card_t * gus, int voice, int lfo_type, struct _SND_IW_LFO_PROGRAM *program);
+extern void snd_gf1_lfo_enable(snd_gus_card_t * gus, int voice, int lfo_type);
+extern void snd_gf1_lfo_disable(snd_gus_card_t * gus, int voice, int lfo_type);
+extern void snd_gf1_lfo_change_freq(snd_gus_card_t * gus, int voice, int lfo_type, int freq);
+extern void snd_gf1_lfo_change_depth(snd_gus_card_t * gus, int voice, int lfo_type, int depth);
+extern void snd_gf1_lfo_setup(snd_gus_card_t * gus, int voice, int lfo_type, int freq, int current_depth, int depth, int sweep, int shape);
+extern void snd_gf1_lfo_shutdown(snd_gus_card_t * gus, int voice, int lfo_type);
+#if 0
+extern void snd_gf1_lfo_command(snd_gus_card_t * gus, int voice, unsigned char *command);
+#endif
+
+/* gus_mem.c */
+
+void snd_gf1_mem_lock(snd_gf1_mem_t * alloc, int xup);
+int snd_gf1_mem_xfree(snd_gf1_mem_t * alloc, snd_gf1_mem_block_t * block);
+snd_gf1_mem_block_t *snd_gf1_mem_look(snd_gf1_mem_t * alloc,
+				      unsigned int address);
+snd_gf1_mem_block_t *snd_gf1_mem_share(snd_gf1_mem_t * alloc,
+				       unsigned int *share_id);
+snd_gf1_mem_block_t *snd_gf1_mem_alloc(snd_gf1_mem_t * alloc, int owner,
+				       char *name, int size, int w_16,
+				       int align, unsigned int *share_id);
+int snd_gf1_mem_free(snd_gf1_mem_t * alloc, unsigned int address);
+int snd_gf1_mem_free_owner(snd_gf1_mem_t * alloc, int owner);
+int snd_gf1_mem_init(snd_gus_card_t * gus);
+int snd_gf1_mem_done(snd_gus_card_t * gus);
+
+/* gus_mem_proc.c */
+
+int snd_gf1_mem_proc_init(snd_gus_card_t * gus);
+
+/* gus_dma.c */
+
+int snd_gf1_dma_init(snd_gus_card_t * gus);
+int snd_gf1_dma_done(snd_gus_card_t * gus);
+int snd_gf1_dma_transfer_block(snd_gus_card_t * gus,
+			       snd_gf1_dma_block_t * block,
+			       int atomic,
+			       int synth);
+
+/* gus_volume.c */
+
+unsigned short snd_gf1_lvol_to_gvol_raw(unsigned int vol);
+unsigned int snd_gf1_gvol_to_lvol_raw(unsigned short gf1_vol);
+unsigned int snd_gf1_calc_ramp_rate(snd_gus_card_t * gus,
+				    unsigned short start,
+				    unsigned short end,
+				    unsigned int us);
+unsigned short snd_gf1_translate_freq(snd_gus_card_t * gus, unsigned int freq2);
+unsigned short snd_gf1_compute_pitchbend(unsigned short pitchbend, unsigned short sens);
+unsigned short snd_gf1_compute_freq(unsigned int freq,
+				    unsigned int rate,
+				    unsigned short mix_rate);
+
+/* gus_reset.c */
+
+void snd_gf1_set_default_handlers(snd_gus_card_t * gus, unsigned int what);
+void snd_gf1_smart_stop_voice(snd_gus_card_t * gus, unsigned short voice);
+void snd_gf1_stop_voice(snd_gus_card_t * gus, unsigned short voice);
+void snd_gf1_clear_voices(snd_gus_card_t * gus, unsigned short v_min, unsigned short v_max);
+void snd_gf1_stop_voices(snd_gus_card_t * gus, unsigned short v_min, unsigned short v_max);
+snd_gus_voice_t *snd_gf1_alloc_voice(snd_gus_card_t * gus, int type, int client, int port);
+void snd_gf1_free_voice(snd_gus_card_t * gus, snd_gus_voice_t *voice);
+int snd_gf1_start(snd_gus_card_t * gus);
+int snd_gf1_stop(snd_gus_card_t * gus);
+
+/* gus_mixer.c */
+
+int snd_gf1_new_mixer(snd_gus_card_t * gus);
+
+/* gus_pcm.c */
+
+int snd_gf1_pcm_new(snd_gus_card_t * gus, int pcm_dev, int control_index, snd_pcm_t ** rpcm);
+
+#ifdef CONFIG_SND_DEBUG
+extern void snd_gf1_print_voice_registers(snd_gus_card_t * gus);
+extern void snd_gf1_print_global_registers(snd_gus_card_t * gus);
+extern void snd_gf1_print_setup_registers(snd_gus_card_t * gus);
+extern void snd_gf1_peek_print_block(snd_gus_card_t * gus, unsigned int addr, int count, int w_16bit);
+#endif
+
+/* gus.c */
+
+int snd_gus_use_inc(snd_gus_card_t * gus);
+void snd_gus_use_dec(snd_gus_card_t * gus);
+int snd_gus_create(snd_card_t * card,
+		   unsigned long port,
+		   int irq, int dma1, int dma2,
+		   int timer_dev,
+		   int voices,
+		   int pcm_channels,
+		   int effect,
+		   snd_gus_card_t ** rgus);
+int snd_gus_initialize(snd_gus_card_t * gus);
+
+/* gus_irq.c */
+
+irqreturn_t snd_gus_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+#ifdef CONFIG_SND_DEBUG
+void snd_gus_irq_profile_init(snd_gus_card_t *gus);
+#endif
+
+/* gus_uart.c */
+
+int snd_gf1_rawmidi_new(snd_gus_card_t * gus, int device, snd_rawmidi_t **rrawmidi);
+
+#if 0
+extern void snd_engine_instrument_register(unsigned short mode,
+		struct _SND_INSTRUMENT_VOICE_COMMANDS *voice_cmds,
+		struct _SND_INSTRUMENT_NOTE_COMMANDS *note_cmds,
+	      	struct _SND_INSTRUMENT_CHANNEL_COMMANDS *channel_cmds);
+extern int snd_engine_instrument_register_ask(unsigned short mode);
+#endif
+
+/* gus_dram.c */
+int snd_gus_dram_write(snd_gus_card_t *gus, char __user *ptr,
+		       unsigned int addr, unsigned int size);
+int snd_gus_dram_read(snd_gus_card_t *gus, char __user *ptr,
+		      unsigned int addr, unsigned int size, int rom);
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+
+/* gus_sample.c */
+void snd_gus_sample_event(snd_seq_event_t *ev, snd_gus_port_t *p);
+
+/* gus_simple.c */
+void snd_gf1_simple_init(snd_gus_voice_t *voice);
+
+/* gus_instr.c */
+int snd_gus_iwffff_put_sample(void *private_data, iwffff_wave_t *wave,
+			      char __user *data, long len, int atomic);
+int snd_gus_iwffff_get_sample(void *private_data, iwffff_wave_t *wave,
+			      char __user *data, long len, int atomic);
+int snd_gus_iwffff_remove_sample(void *private_data, iwffff_wave_t *wave,
+				 int atomic);
+int snd_gus_gf1_put_sample(void *private_data, gf1_wave_t *wave,
+			   char __user *data, long len, int atomic);
+int snd_gus_gf1_get_sample(void *private_data, gf1_wave_t *wave,
+			   char __user *data, long len, int atomic);
+int snd_gus_gf1_remove_sample(void *private_data, gf1_wave_t *wave,
+			      int atomic);
+int snd_gus_simple_put_sample(void *private_data, simple_instrument_t *instr,
+			      char __user *data, long len, int atomic);
+int snd_gus_simple_get_sample(void *private_data, simple_instrument_t *instr,
+			      char __user *data, long len, int atomic);
+int snd_gus_simple_remove_sample(void *private_data, simple_instrument_t *instr,
+				 int atomic);
+
+#endif /* CONFIG_SND_SEQUENCER */
+
+#endif /* __SOUND_GUS_H */
diff --git a/include/sound/hdsp.h b/include/sound/hdsp.h
new file mode 100644
index 000000000000..7ce3aa67e5d6
--- /dev/null
+++ b/include/sound/hdsp.h
@@ -0,0 +1,110 @@
+#ifndef __SOUND_HDSP_H
+#define __SOUND_HDSP_H
+
+/*
+ *   Copyright (C) 2003 Thomas Charbonnel (thomas@undata.org)
+ *    
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define HDSP_MATRIX_MIXER_SIZE 2048
+
+typedef enum {
+	Digiface,
+	Multiface,
+	H9652,
+	H9632,
+	Undefined,
+} HDSP_IO_Type;
+
+typedef struct _snd_hdsp_peak_rms hdsp_peak_rms_t;
+
+struct _snd_hdsp_peak_rms {
+	u32 input_peaks[26];
+	u32 playback_peaks[26];
+	u32 output_peaks[28];
+	u64 input_rms[26];
+	u64 playback_rms[26];
+	/* These are only used for H96xx cards */
+	u64 output_rms[26];
+};
+
+#define SNDRV_HDSP_IOCTL_GET_PEAK_RMS _IOR('H', 0x40, hdsp_peak_rms_t)
+
+typedef struct _snd_hdsp_config_info hdsp_config_info_t;
+
+struct _snd_hdsp_config_info {
+	unsigned char pref_sync_ref;
+	unsigned char wordclock_sync_check;
+	unsigned char spdif_sync_check;
+	unsigned char adatsync_sync_check;
+	unsigned char adat_sync_check[3];
+	unsigned char spdif_in;
+	unsigned char spdif_out;
+	unsigned char spdif_professional;
+	unsigned char spdif_emphasis;
+	unsigned char spdif_nonaudio;
+	unsigned int spdif_sample_rate;
+	unsigned int system_sample_rate;
+	unsigned int autosync_sample_rate;
+	unsigned char system_clock_mode;
+	unsigned char clock_source;
+	unsigned char autosync_ref;
+	unsigned char line_out;
+	unsigned char passthru; 
+	unsigned char da_gain;
+	unsigned char ad_gain;
+	unsigned char phone_gain;
+	unsigned char xlr_breakout_cable;
+	unsigned char analog_extension_board;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_CONFIG_INFO _IOR('H', 0x41, hdsp_config_info_t)
+
+typedef struct _snd_hdsp_firmware hdsp_firmware_t;
+
+struct _snd_hdsp_firmware {
+	void __user *firmware_data;	/* 24413 x 4 bytes */
+};
+
+#define SNDRV_HDSP_IOCTL_UPLOAD_FIRMWARE _IOW('H', 0x42, hdsp_firmware_t)
+
+typedef struct _snd_hdsp_version hdsp_version_t;
+
+struct _snd_hdsp_version {
+	HDSP_IO_Type io_type;
+	unsigned short firmware_rev;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_VERSION _IOR('H', 0x43, hdsp_version_t)
+
+typedef struct _snd_hdsp_mixer hdsp_mixer_t;
+
+struct _snd_hdsp_mixer {
+	unsigned short matrix[HDSP_MATRIX_MIXER_SIZE];
+};
+
+#define SNDRV_HDSP_IOCTL_GET_MIXER _IOR('H', 0x44, hdsp_mixer_t)
+
+typedef struct _snd_hdsp_9632_aeb hdsp_9632_aeb_t;
+
+struct _snd_hdsp_9632_aeb {
+	int aebi;
+	int aebo;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_9632_AEB _IOR('H', 0x45, hdsp_9632_aeb_t)
+
+#endif /* __SOUND_HDSP_H */
diff --git a/include/sound/hwdep.h b/include/sound/hwdep.h
new file mode 100644
index 000000000000..043876348fa1
--- /dev/null
+++ b/include/sound/hwdep.h
@@ -0,0 +1,73 @@
+#ifndef __SOUND_HWDEP_H
+#define __SOUND_HWDEP_H
+
+/*
+ *  Hardware dependent layer 
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/poll.h>
+
+typedef enum sndrv_hwdep_iface snd_hwdep_iface_t;
+typedef struct sndrv_hwdep_info snd_hwdep_info_t;
+typedef struct sndrv_hwdep_dsp_status snd_hwdep_dsp_status_t;
+typedef struct sndrv_hwdep_dsp_image snd_hwdep_dsp_image_t;
+
+typedef struct _snd_hwdep_ops {
+	long long (*llseek) (snd_hwdep_t *hw, struct file * file, long long offset, int orig);
+	long (*read) (snd_hwdep_t * hw, char __user *buf, long count, loff_t *offset);
+	long (*write) (snd_hwdep_t * hw, const char __user *buf, long count, loff_t *offset);
+	int (*open) (snd_hwdep_t * hw, struct file * file);
+	int (*release) (snd_hwdep_t * hw, struct file * file);
+	unsigned int (*poll) (snd_hwdep_t * hw, struct file * file, poll_table * wait);
+	int (*ioctl) (snd_hwdep_t * hw, struct file * file, unsigned int cmd, unsigned long arg);
+	int (*ioctl_compat) (snd_hwdep_t * hw, struct file * file, unsigned int cmd, unsigned long arg);
+	int (*mmap) (snd_hwdep_t * hw, struct file * file, struct vm_area_struct * vma);
+	int (*dsp_status) (snd_hwdep_t * hw, snd_hwdep_dsp_status_t * status);
+	int (*dsp_load) (snd_hwdep_t * hw, snd_hwdep_dsp_image_t * image);
+} snd_hwdep_ops_t;
+
+struct _snd_hwdep {
+	snd_card_t *card;
+	int device;
+	char id[32];
+	char name[80];
+	int iface;
+
+#ifdef CONFIG_SND_OSSEMUL
+	char oss_dev[32];
+	int oss_type;
+	int ossreg;
+#endif
+
+	snd_hwdep_ops_t ops;
+	wait_queue_head_t open_wait;
+	void *private_data;
+	void (*private_free) (snd_hwdep_t *hwdep);
+
+	struct semaphore open_mutex;
+	int used;
+	unsigned int dsp_loaded;
+	unsigned int exclusive: 1;
+};
+
+extern int snd_hwdep_new(snd_card_t * card, char *id, int device, snd_hwdep_t ** rhwdep);
+
+#endif /* __SOUND_HWDEP_H */
diff --git a/include/sound/i2c.h b/include/sound/i2c.h
new file mode 100644
index 000000000000..a665ddf9c146
--- /dev/null
+++ b/include/sound/i2c.h
@@ -0,0 +1,102 @@
+#ifndef __SOUND_I2C_H
+#define __SOUND_I2C_H
+
+/*
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ */
+
+typedef struct _snd_i2c_device snd_i2c_device_t;
+typedef struct _snd_i2c_bus snd_i2c_bus_t;
+
+#define SND_I2C_DEVICE_ADDRTEN	(1<<0)	/* 10-bit I2C address */
+
+struct _snd_i2c_device {
+	struct list_head list;
+	snd_i2c_bus_t *bus;	/* I2C bus */
+	char name[32];		/* some useful device name */
+	unsigned short flags;	/* device flags */
+	unsigned short addr;	/* device address (might be 10-bit) */
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(snd_i2c_device_t *device);
+};
+
+#define snd_i2c_device(n) list_entry(n, snd_i2c_device_t, list)
+
+typedef struct _snd_i2c_bit_ops {
+	void (*start)(snd_i2c_bus_t *bus);	/* transfer start */
+	void (*stop)(snd_i2c_bus_t *bus);	/* transfer stop */
+	void (*direction)(snd_i2c_bus_t *bus, int clock, int data);  /* set line direction (0 = write, 1 = read) */
+	void (*setlines)(snd_i2c_bus_t *bus, int clock, int data);
+	int (*getclock)(snd_i2c_bus_t *bus);
+	int (*getdata)(snd_i2c_bus_t *bus, int ack);
+} snd_i2c_bit_ops_t;
+
+typedef struct _snd_i2c_ops {
+	int (*sendbytes)(snd_i2c_device_t *device, unsigned char *bytes, int count);
+	int (*readbytes)(snd_i2c_device_t *device, unsigned char *bytes, int count);
+	int (*probeaddr)(snd_i2c_bus_t *bus, unsigned short addr);
+} snd_i2c_ops_t;
+
+struct _snd_i2c_bus {
+	snd_card_t *card;	/* card which I2C belongs to */
+	char name[32];		/* some useful label */
+
+	struct semaphore lock_mutex;
+
+	snd_i2c_bus_t *master;	/* master bus when SCK/SCL is shared */
+	struct list_head buses;	/* master: slave buses sharing SCK/SCL, slave: link list */
+
+	struct list_head devices; /* attached devices to this bus */
+
+	union {
+		snd_i2c_bit_ops_t *bit;
+		void *ops;
+	} hw_ops;		/* lowlevel operations */
+	snd_i2c_ops_t *ops;	/* midlevel operations */
+
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(snd_i2c_bus_t *bus);
+};
+
+#define snd_i2c_slave_bus(n) list_entry(n, snd_i2c_bus_t, buses)
+
+int snd_i2c_bus_create(snd_card_t *card, const char *name, snd_i2c_bus_t *master, snd_i2c_bus_t **ri2c);
+int snd_i2c_device_create(snd_i2c_bus_t *bus, const char *name, unsigned char addr, snd_i2c_device_t **rdevice);
+int snd_i2c_device_free(snd_i2c_device_t *device);
+
+static inline void snd_i2c_lock(snd_i2c_bus_t *bus) {
+	if (bus->master)
+		down(&bus->master->lock_mutex);
+	else
+		down(&bus->lock_mutex);
+}
+static inline void snd_i2c_unlock(snd_i2c_bus_t *bus) {
+	if (bus->master)
+		up(&bus->master->lock_mutex);
+	else
+		up(&bus->lock_mutex);
+}
+
+int snd_i2c_sendbytes(snd_i2c_device_t *device, unsigned char *bytes, int count);
+int snd_i2c_readbytes(snd_i2c_device_t *device, unsigned char *bytes, int count);
+int snd_i2c_probeaddr(snd_i2c_bus_t *bus, unsigned short addr);
+
+#endif /* __SOUND_I2C_H */
diff --git a/include/sound/info.h b/include/sound/info.h
new file mode 100644
index 000000000000..1d76bf3cb05e
--- /dev/null
+++ b/include/sound/info.h
@@ -0,0 +1,193 @@
+#ifndef __SOUND_INFO_H
+#define __SOUND_INFO_H
+
+/*
+ *  Header file for info interface
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/poll.h>
+
+/* buffer for information */
+struct snd_info_buffer {
+	char *buffer;		/* pointer to begin of buffer */
+	char *curr;		/* current position in buffer */
+	unsigned long size;	/* current size */
+	unsigned long len;	/* total length of buffer */
+	int stop;		/* stop flag */
+	int error;		/* error code */
+};
+
+typedef struct snd_info_buffer snd_info_buffer_t;
+
+#define SNDRV_INFO_CONTENT_TEXT		0
+#define SNDRV_INFO_CONTENT_DATA		1
+
+struct snd_info_entry;
+
+struct snd_info_entry_text {
+	unsigned long read_size;
+	unsigned long write_size;
+	void (*read) (snd_info_entry_t *entry, snd_info_buffer_t * buffer);
+	void (*write) (snd_info_entry_t *entry, snd_info_buffer_t * buffer);
+};
+
+struct snd_info_entry_ops {
+	int (*open) (snd_info_entry_t *entry,
+		     unsigned short mode, void **file_private_data);
+	int (*release) (snd_info_entry_t * entry,
+			unsigned short mode, void *file_private_data);
+	long (*read) (snd_info_entry_t *entry, void *file_private_data,
+		      struct file * file, char __user *buf,
+		      unsigned long count, unsigned long pos);
+	long (*write) (snd_info_entry_t *entry, void *file_private_data,
+		       struct file * file, const char __user *buf,
+		       unsigned long count, unsigned long pos);
+	long long (*llseek) (snd_info_entry_t *entry, void *file_private_data,
+			    struct file * file, long long offset, int orig);
+	unsigned int (*poll) (snd_info_entry_t *entry, void *file_private_data,
+			      struct file * file, poll_table * wait);
+	int (*ioctl) (snd_info_entry_t *entry, void *file_private_data,
+		      struct file * file, unsigned int cmd, unsigned long arg);
+	int (*mmap) (snd_info_entry_t *entry, void *file_private_data,
+		     struct inode * inode, struct file * file,
+		     struct vm_area_struct * vma);
+};
+
+struct snd_info_entry {
+	const char *name;
+	mode_t mode;
+	long size;
+	unsigned short content;
+	unsigned short disconnected: 1;
+	union {
+		struct snd_info_entry_text text;
+		struct snd_info_entry_ops *ops;
+	} c;
+	snd_info_entry_t *parent;
+	snd_card_t *card;
+	struct module *module;
+	void *private_data;
+	void (*private_free)(snd_info_entry_t *entry);
+	struct proc_dir_entry *p;
+	struct semaphore access;
+};
+
+extern int snd_info_check_reserved_words(const char *str);
+
+#if defined(CONFIG_SND_OSSEMUL) && defined(CONFIG_PROC_FS)
+extern int snd_info_minor_register(void);
+extern int snd_info_minor_unregister(void);
+#else
+#define snd_info_minor_register() /* NOP */
+#define snd_info_minor_unregister() /* NOP */
+#endif
+
+
+#ifdef CONFIG_PROC_FS
+
+extern snd_info_entry_t *snd_seq_root;
+#ifdef CONFIG_SND_OSSEMUL
+extern snd_info_entry_t *snd_oss_root;
+#else
+#define snd_oss_root NULL
+#endif
+
+int snd_iprintf(snd_info_buffer_t * buffer, char *fmt,...) __attribute__ ((format (printf, 2, 3)));
+int snd_info_init(void);
+int snd_info_done(void);
+
+int snd_info_get_line(snd_info_buffer_t * buffer, char *line, int len);
+char *snd_info_get_str(char *dest, char *src, int len);
+snd_info_entry_t *snd_info_create_module_entry(struct module * module,
+					       const char *name,
+					       snd_info_entry_t * parent);
+snd_info_entry_t *snd_info_create_card_entry(snd_card_t * card,
+					     const char *name,
+					     snd_info_entry_t * parent);
+void snd_info_free_entry(snd_info_entry_t * entry);
+int snd_info_store_text(snd_info_entry_t * entry);
+int snd_info_restore_text(snd_info_entry_t * entry);
+
+int snd_info_card_create(snd_card_t * card);
+int snd_info_card_register(snd_card_t * card);
+int snd_info_card_free(snd_card_t * card);
+int snd_info_register(snd_info_entry_t * entry);
+int snd_info_unregister(snd_info_entry_t * entry);
+
+/* for card drivers */
+int snd_card_proc_new(snd_card_t *card, const char *name, snd_info_entry_t **entryp);
+
+static inline void snd_info_set_text_ops(snd_info_entry_t *entry, 
+					 void *private_data,
+					 long read_size,
+					 void (*read)(snd_info_entry_t *, snd_info_buffer_t *))
+{
+	entry->private_data = private_data;
+	entry->c.text.read_size = read_size;
+	entry->c.text.read = read;
+}
+
+
+#else
+
+#define snd_seq_root NULL
+#define snd_oss_root NULL
+
+static inline int snd_iprintf(snd_info_buffer_t * buffer, char *fmt,...) { return 0; }
+static inline int snd_info_init(void) { return 0; }
+static inline int snd_info_done(void) { return 0; }
+
+static inline int snd_info_get_line(snd_info_buffer_t * buffer, char *line, int len) { return 0; }
+static inline char *snd_info_get_str(char *dest, char *src, int len) { return NULL; }
+static inline snd_info_entry_t *snd_info_create_module_entry(struct module * module, const char *name, snd_info_entry_t * parent) { return NULL; }
+static inline snd_info_entry_t *snd_info_create_card_entry(snd_card_t * card, const char *name, snd_info_entry_t * parent) { return NULL; }
+static inline void snd_info_free_entry(snd_info_entry_t * entry) { ; }
+
+static inline int snd_info_card_create(snd_card_t * card) { return 0; }
+static inline int snd_info_card_register(snd_card_t * card) { return 0; }
+static inline int snd_info_card_free(snd_card_t * card) { return 0; }
+static inline int snd_info_register(snd_info_entry_t * entry) { return 0; }
+static inline int snd_info_unregister(snd_info_entry_t * entry) { return 0; }
+
+#define snd_card_proc_new(card,name,entryp)  0 /* always success */
+#define snd_info_set_text_ops(entry,private_data,read_size,read) /*NOP*/
+
+#endif
+
+/*
+ * OSS info part
+ */
+
+#if defined(CONFIG_SND_OSSEMUL) && defined(CONFIG_PROC_FS)
+
+#define SNDRV_OSS_INFO_DEV_AUDIO	0
+#define SNDRV_OSS_INFO_DEV_SYNTH	1
+#define SNDRV_OSS_INFO_DEV_MIDI		2
+#define SNDRV_OSS_INFO_DEV_TIMERS	4
+#define SNDRV_OSS_INFO_DEV_MIXERS	5
+
+#define SNDRV_OSS_INFO_DEV_COUNT	6
+
+extern int snd_oss_info_register(int dev, int num, char *string);
+#define snd_oss_info_unregister(dev, num) snd_oss_info_register(dev, num, NULL)
+
+#endif /* CONFIG_SND_OSSEMUL && CONFIG_PROC_FS */
+
+#endif /* __SOUND_INFO_H */
diff --git a/include/sound/initval.h b/include/sound/initval.h
new file mode 100644
index 000000000000..2bf1508825a4
--- /dev/null
+++ b/include/sound/initval.h
@@ -0,0 +1,103 @@
+#ifndef __SOUND_INITVAL_H
+#define __SOUND_INITVAL_H
+
+/*
+ *  Init values for soundcard modules
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_AUTO_PORT		1
+#define SNDRV_AUTO_IRQ		0xffff
+#define SNDRV_AUTO_DMA		0xffff
+#define SNDRV_AUTO_DMA_SIZE	(0x7fffffff)
+
+#define SNDRV_DEFAULT_IDX1	(-1)
+#define SNDRV_DEFAULT_STR1	NULL
+#define SNDRV_DEFAULT_ENABLE1	1
+#define SNDRV_DEFAULT_PORT1	SNDRV_AUTO_PORT
+#define SNDRV_DEFAULT_IRQ1	SNDRV_AUTO_IRQ
+#define SNDRV_DEFAULT_DMA1	SNDRV_AUTO_DMA
+#define SNDRV_DEFAULT_DMA_SIZE1	SNDRV_AUTO_DMA_SIZE
+#define SNDRV_DEFAULT_PTR1	SNDRV_DEFAULT_STR1
+
+#define SNDRV_DEFAULT_IDX	{ [0 ... (SNDRV_CARDS-1)] = -1 }
+#define SNDRV_DEFAULT_STR	{ [0 ... (SNDRV_CARDS-1)] = NULL }
+#define SNDRV_DEFAULT_ENABLE	{ 1, [1 ... (SNDRV_CARDS-1)] = 0 }
+#define SNDRV_DEFAULT_ENABLE_PNP { [0 ... (SNDRV_CARDS-1)] = 1 }
+#ifdef CONFIG_PNP
+#define SNDRV_DEFAULT_ENABLE_ISAPNP SNDRV_DEFAULT_ENABLE_PNP
+#else
+#define SNDRV_DEFAULT_ENABLE_ISAPNP SNDRV_DEFAULT_ENABLE
+#endif
+#define SNDRV_DEFAULT_PORT	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_PORT }
+#define SNDRV_DEFAULT_IRQ	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_IRQ }
+#define SNDRV_DEFAULT_DMA	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_DMA }
+#define SNDRV_DEFAULT_DMA_SIZE	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_DMA_SIZE }
+#define SNDRV_DEFAULT_PTR	SNDRV_DEFAULT_STR
+
+#ifdef SNDRV_LEGACY_AUTO_PROBE
+static int snd_legacy_auto_probe(unsigned long *ports, int (*probe)(unsigned long port))
+{
+	int result = 0;	/* number of detected cards */
+
+	while ((signed long)*ports != -1) {
+		if (probe(*ports) >= 0)
+			result++;
+		ports++;
+	}
+	return result;
+}
+#endif
+
+#ifdef SNDRV_LEGACY_FIND_FREE_IRQ
+#include <linux/interrupt.h>
+
+static irqreturn_t snd_legacy_empty_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	return IRQ_HANDLED;
+}
+
+static int snd_legacy_find_free_irq(int *irq_table)
+{
+	while (*irq_table != -1) {
+		if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
+				 SA_INTERRUPT, "ALSA Test IRQ", (void *) irq_table)) {
+			free_irq(*irq_table, (void *) irq_table);
+			return *irq_table;
+		}
+		irq_table++;
+	}
+	return -1;
+}
+#endif
+
+#ifdef SNDRV_LEGACY_FIND_FREE_DMA
+static int snd_legacy_find_free_dma(int *dma_table)
+{
+	while (*dma_table != -1) {
+		if (!request_dma(*dma_table, "ALSA Test DMA")) {
+			free_dma(*dma_table);
+			return *dma_table;
+		}
+		dma_table++;
+	}
+	return -1;
+}
+#endif
+
+#endif /* __SOUND_INITVAL_H */
diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h
new file mode 100644
index 000000000000..3a2fd2cc9f19
--- /dev/null
+++ b/include/sound/memalloc.h
@@ -0,0 +1,118 @@
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *                   Takashi Iwai <tiwai@suse.de>
+ * 
+ *  Generic memory allocators
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_MEMALLOC_H
+#define __SOUND_MEMALLOC_H
+
+struct device;
+
+/*
+ * buffer device info
+ */
+struct snd_dma_device {
+	int type;			/* SNDRV_DMA_TYPE_XXX */
+	struct device *dev;		/* generic device */
+};
+
+#ifndef snd_dma_pci_data
+#define snd_dma_pci_data(pci)	(&(pci)->dev)
+#define snd_dma_isa_data()	NULL
+#define snd_dma_sbus_data(sbus)	((struct device *)(sbus))
+#define snd_dma_continuous_data(x)	((struct device *)(unsigned long)(x))
+#endif
+
+
+/*
+ * buffer types
+ */
+#define SNDRV_DMA_TYPE_UNKNOWN		0	/* not defined */
+#define SNDRV_DMA_TYPE_CONTINUOUS	1	/* continuous no-DMA memory */
+#define SNDRV_DMA_TYPE_DEV		2	/* generic device continuous */
+#define SNDRV_DMA_TYPE_DEV_SG		3	/* generic device SG-buffer */
+#define SNDRV_DMA_TYPE_SBUS		4	/* SBUS continuous */
+
+/*
+ * info for buffer allocation
+ */
+struct snd_dma_buffer {
+	struct snd_dma_device dev;	/* device type */
+	unsigned char *area;	/* virtual pointer */
+	dma_addr_t addr;	/* physical address */
+	size_t bytes;		/* buffer size in bytes */
+	void *private_data;	/* private for allocator; don't touch */
+};
+
+/*
+ * Scatter-Gather generic device pages
+ */
+struct snd_sg_page {
+	void *buf;
+	dma_addr_t addr;
+};
+
+struct snd_sg_buf {
+	int size;	/* allocated byte size */
+	int pages;	/* allocated pages */
+	int tblsize;	/* allocated table size */
+	struct snd_sg_page *table;	/* address table */
+	struct page **page_table;	/* page table (for vmap/vunmap) */
+	struct device *dev;
+};
+
+/*
+ * return the pages matching with the given byte size
+ */
+static inline unsigned int snd_sgbuf_aligned_pages(size_t size)
+{
+	return (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+}
+
+/*
+ * return the physical address at the corresponding offset
+ */
+static inline dma_addr_t snd_sgbuf_get_addr(struct snd_sg_buf *sgbuf, size_t offset)
+{
+	return sgbuf->table[offset >> PAGE_SHIFT].addr + offset % PAGE_SIZE;
+}
+
+
+/* allocate/release a buffer */
+int snd_dma_alloc_pages(int type, struct device *dev, size_t size,
+			struct snd_dma_buffer *dmab);
+int snd_dma_alloc_pages_fallback(int type, struct device *dev, size_t size,
+                                 struct snd_dma_buffer *dmab);
+void snd_dma_free_pages(struct snd_dma_buffer *dmab);
+
+/* buffer-preservation managements */
+
+#define snd_dma_pci_buf_id(pci)	(((unsigned int)(pci)->vendor << 16) | (pci)->device)
+
+size_t snd_dma_get_reserved_buf(struct snd_dma_buffer *dmab, unsigned int id);
+int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id);
+
+/* basic memory allocation functions */
+void *snd_malloc_pages(size_t size, unsigned int gfp_flags);
+void snd_free_pages(void *ptr, size_t size);
+
+#endif /* __SOUND_MEMALLOC_H */
+
diff --git a/include/sound/minors.h b/include/sound/minors.h
new file mode 100644
index 000000000000..b7b0d8309449
--- /dev/null
+++ b/include/sound/minors.h
@@ -0,0 +1,89 @@
+#ifndef __SOUND_MINORS_H
+#define __SOUND_MINORS_H
+
+/*
+ *  MINOR numbers
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_MINOR_DEVICES		32
+#define SNDRV_MINOR_CARD(minor)		((minor) >> 5)
+#define SNDRV_MINOR_DEVICE(minor)	((minor) & 0x001f)
+#define SNDRV_MINOR(card, dev)		(((card) << 5) | (dev))
+
+#define SNDRV_MINOR_CONTROL		0	/* 0 - 0 */
+#define SNDRV_MINOR_SEQUENCER		1
+#define SNDRV_MINOR_TIMER		(1+32)
+#define SNDRV_MINOR_HWDEP		4	/* 4 - 7 */
+#define SNDRV_MINOR_HWDEPS		4
+#define SNDRV_MINOR_RAWMIDI		8	/* 8 - 15 */
+#define SNDRV_MINOR_RAWMIDIS		8
+#define SNDRV_MINOR_PCM_PLAYBACK	16	/* 16 - 23 */
+#define SNDRV_MINOR_PCM_CAPTURE		24	/* 24 - 31 */
+#define SNDRV_MINOR_PCMS		8
+
+#define SNDRV_DEVICE_TYPE_CONTROL	SNDRV_MINOR_CONTROL
+#define SNDRV_DEVICE_TYPE_HWDEP		SNDRV_MINOR_HWDEP
+#define SNDRV_DEVICE_TYPE_MIXER		SNDRV_MINOR_MIXER
+#define SNDRV_DEVICE_TYPE_RAWMIDI	SNDRV_MINOR_RAWMIDI
+#define SNDRV_DEVICE_TYPE_PCM_PLAYBACK	SNDRV_MINOR_PCM_PLAYBACK
+#define SNDRV_DEVICE_TYPE_PCM_PLOOP	SNDRV_MINOR_PCM_PLOOP
+#define SNDRV_DEVICE_TYPE_PCM_CAPTURE	SNDRV_MINOR_PCM_CAPTURE
+#define SNDRV_DEVICE_TYPE_PCM_CLOOP	SNDRV_MINOR_PCM_CLOOP
+#define SNDRV_DEVICE_TYPE_SEQUENCER	SNDRV_MINOR_SEQUENCER
+#define SNDRV_DEVICE_TYPE_TIMER		SNDRV_MINOR_TIMER
+
+#ifdef CONFIG_SND_OSSEMUL
+
+#define SNDRV_MINOR_OSS_DEVICES		16
+#define SNDRV_MINOR_OSS_CARD(minor)	((minor) >> 4)
+#define SNDRV_MINOR_OSS_DEVICE(minor)	((minor) & 0x000f)
+#define SNDRV_MINOR_OSS(card, dev)	(((card) << 4) | (dev))
+
+#define SNDRV_MINOR_OSS_MIXER		0	/* /dev/mixer - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_SEQUENCER	1	/* /dev/sequencer - OSS 3.XX compatible */
+#define	SNDRV_MINOR_OSS_MIDI		2	/* /dev/midi - native midi interface - OSS 3.XX compatible - UART */
+#define SNDRV_MINOR_OSS_PCM		3	/* alias */
+#define SNDRV_MINOR_OSS_PCM_8		3	/* /dev/dsp - 8bit PCM - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_AUDIO		4	/* /dev/audio - SunSparc compatible */
+#define SNDRV_MINOR_OSS_PCM_16		5	/* /dev/dsp16 - 16bit PCM - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_SNDSTAT		6	/* /dev/sndstat - for compatibility with OSS */
+#define SNDRV_MINOR_OSS_RESERVED7	7	/* reserved for future use */
+#define SNDRV_MINOR_OSS_MUSIC		8	/* /dev/music - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_DMMIDI		9	/* /dev/dmmidi0 - this device can have another minor # with OSS */
+#define SNDRV_MINOR_OSS_DMFM		10	/* /dev/dmfm0 - this device can have another minor # with OSS */
+#define SNDRV_MINOR_OSS_MIXER1		11	/* alternate mixer */
+#define SNDRV_MINOR_OSS_PCM1		12	/* alternate PCM (GF-A-1) */
+#define SNDRV_MINOR_OSS_MIDI1		13	/* alternate midi - SYNTH */
+#define SNDRV_MINOR_OSS_DMMIDI1		14	/* alternate dmmidi - SYNTH */
+#define SNDRV_MINOR_OSS_RESERVED15	15	/* reserved for future use */
+
+#define SNDRV_OSS_DEVICE_TYPE_MIXER	0
+#define SNDRV_OSS_DEVICE_TYPE_SEQUENCER	1
+#define SNDRV_OSS_DEVICE_TYPE_PCM	2
+#define SNDRV_OSS_DEVICE_TYPE_MIDI	3
+#define SNDRV_OSS_DEVICE_TYPE_DMFM	4
+#define SNDRV_OSS_DEVICE_TYPE_SNDSTAT	5
+#define SNDRV_OSS_DEVICE_TYPE_MUSIC	6
+
+#define MODULE_ALIAS_SNDRV_MINOR(type) \
+	MODULE_ALIAS("sound-service-?-" __stringify(type))
+
+#endif
+
+#endif /* __SOUND_MINORS_H */
diff --git a/include/sound/mixer_oss.h b/include/sound/mixer_oss.h
new file mode 100644
index 000000000000..ed75b2fb00ab
--- /dev/null
+++ b/include/sound/mixer_oss.h
@@ -0,0 +1,76 @@
+#ifndef __SOUND_MIXER_OSS_H
+#define __SOUND_MIXER_OSS_H
+
+/*
+ *  OSS MIXER API
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+
+typedef struct _snd_oss_mixer_slot snd_mixer_oss_slot_t;
+typedef struct _snd_oss_file snd_mixer_oss_file_t;
+
+typedef int (*snd_mixer_oss_get_volume_t)(snd_mixer_oss_file_t *fmixer, snd_mixer_oss_slot_t *chn, int *left, int *right);
+typedef int (*snd_mixer_oss_put_volume_t)(snd_mixer_oss_file_t *fmixer, snd_mixer_oss_slot_t *chn, int left, int right);
+typedef int (*snd_mixer_oss_get_recsrc_t)(snd_mixer_oss_file_t *fmixer, snd_mixer_oss_slot_t *chn, int *active);
+typedef int (*snd_mixer_oss_put_recsrc_t)(snd_mixer_oss_file_t *fmixer, snd_mixer_oss_slot_t *chn, int active);
+typedef int (*snd_mixer_oss_get_recsrce_t)(snd_mixer_oss_file_t *fmixer, unsigned int *active_index);
+typedef int (*snd_mixer_oss_put_recsrce_t)(snd_mixer_oss_file_t *fmixer, unsigned int active_index);
+
+#define SNDRV_OSS_MAX_MIXERS	32
+
+struct _snd_oss_mixer_slot {
+	int number;
+	unsigned int stereo: 1;
+	snd_mixer_oss_get_volume_t get_volume;
+	snd_mixer_oss_put_volume_t put_volume;
+	snd_mixer_oss_get_recsrc_t get_recsrc;
+	snd_mixer_oss_put_recsrc_t put_recsrc;
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(snd_mixer_oss_slot_t *slot);
+	int volume[2];
+};
+
+struct _snd_oss_mixer {
+	snd_card_t *card;
+	char id[16];
+	char name[32];
+	snd_mixer_oss_slot_t slots[SNDRV_OSS_MAX_MIXERS]; /* OSS mixer slots */
+	unsigned int mask_recsrc;		/* exclusive recsrc mask */
+	snd_mixer_oss_get_recsrce_t get_recsrc;
+	snd_mixer_oss_put_recsrce_t put_recsrc;
+	void *private_data_recsrc;
+	void (*private_free_recsrc)(snd_mixer_oss_t *mixer);
+	struct semaphore reg_mutex;
+	snd_info_entry_t *proc_entry;
+	int oss_dev_alloc;
+	/* --- */
+	int oss_recsrc;
+};
+
+struct _snd_oss_file {
+	snd_card_t *card;
+	snd_mixer_oss_t *mixer;
+};
+
+#endif /* CONFIG_SND_MIXER_OSS */
+
+#endif /* __SOUND_MIXER_OSS_H */
diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h
new file mode 100644
index 000000000000..ae39e38bf996
--- /dev/null
+++ b/include/sound/mpu401.h
@@ -0,0 +1,115 @@
+#ifndef __SOUND_MPU401_H
+#define __SOUND_MPU401_H
+
+/*
+ *  Header file for MPU-401 and compatible cards
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "rawmidi.h"
+#include <linux/interrupt.h>
+
+#define MPU401_HW_MPU401		1	/* native MPU401 */
+#define MPU401_HW_SB			2	/* SoundBlaster MPU-401 UART */
+#define MPU401_HW_ES1688		3	/* AudioDrive ES1688 MPU-401 UART */
+#define MPU401_HW_OPL3SA2		4	/* Yamaha OPL3-SA2 */
+#define MPU401_HW_SONICVIBES		5	/* S3 SonicVibes */
+#define MPU401_HW_CS4232		6	/* CS4232 */
+#define MPU401_HW_ES18XX		7	/* AudioDrive ES18XX MPU-401 UART */
+#define MPU401_HW_FM801			8	/* ForteMedia FM801 */
+#define MPU401_HW_TRID4DWAVE		9	/* Trident 4DWave */
+#define MPU401_HW_AZT2320		10	/* Aztech AZT2320 */
+#define MPU401_HW_ALS100		11	/* Avance Logic ALS100 */
+#define MPU401_HW_ICE1712		12	/* Envy24 */
+#define MPU401_HW_VIA686A		13	/* VIA 82C686A */
+#define MPU401_HW_YMFPCI		14	/* YMF DS-XG PCI */
+#define MPU401_HW_CMIPCI		15	/* CMIPCI MPU-401 UART */
+#define MPU401_HW_ALS4000		16	/* Avance Logic ALS4000 */
+#define MPU401_HW_INTEL8X0		17	/* Intel8x0 driver */
+#define MPU401_HW_PC98II		18	/* Roland PC98II */
+#define MPU401_HW_AUREAL		19	/* Aureal Vortex */
+
+#define MPU401_MODE_BIT_INPUT		0
+#define MPU401_MODE_BIT_OUTPUT		1
+#define MPU401_MODE_BIT_INPUT_TRIGGER	2
+#define MPU401_MODE_BIT_OUTPUT_TRIGGER	3
+
+#define MPU401_MODE_INPUT		(1<<MPU401_MODE_BIT_INPUT)
+#define MPU401_MODE_OUTPUT		(1<<MPU401_MODE_BIT_OUTPUT)
+#define MPU401_MODE_INPUT_TRIGGER	(1<<MPU401_MODE_BIT_INPUT_TRIGGER)
+#define MPU401_MODE_OUTPUT_TRIGGER	(1<<MPU401_MODE_BIT_OUTPUT_TRIGGER)
+
+#define MPU401_MODE_INPUT_TIMER		(1<<0)
+#define MPU401_MODE_OUTPUT_TIMER	(1<<1)
+
+typedef struct _snd_mpu401 mpu401_t;
+
+struct _snd_mpu401 {
+	snd_rawmidi_t *rmidi;
+
+	unsigned short hardware;	/* MPU401_HW_XXXX */
+	unsigned long port;		/* base port of MPU-401 chip */
+	unsigned long cport;		/* port + 1 (usually) */
+	struct resource *res;		/* port resource */
+	int irq;			/* IRQ number of MPU-401 chip (-1 = poll) */
+	int irq_flags;
+
+	unsigned long mode;		/* MPU401_MODE_XXXX */
+	int timer_invoked;
+
+	int (*open_input) (mpu401_t * mpu);
+	void (*close_input) (mpu401_t * mpu);
+	int (*open_output) (mpu401_t * mpu);
+	void (*close_output) (mpu401_t * mpu);
+	void *private_data;
+
+	snd_rawmidi_substream_t *substream_input;
+	snd_rawmidi_substream_t *substream_output;
+
+	spinlock_t input_lock;
+	spinlock_t output_lock;
+	spinlock_t timer_lock;
+	
+	struct timer_list timer;
+
+	void (*write) (mpu401_t * mpu, unsigned char data, unsigned long addr);
+	unsigned char (*read) (mpu401_t * mpu, unsigned long addr);
+};
+
+/* I/O ports */
+
+#define MPU401C(mpu) (mpu)->cport
+#define MPU401D(mpu) (mpu)->port
+
+/*
+
+ */
+
+irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+int snd_mpu401_uart_new(snd_card_t * card,
+			int device,
+			unsigned short hardware,
+			unsigned long port,
+			int integrated,
+			int irq,
+			int irq_flags,
+			snd_rawmidi_t ** rrawmidi);
+
+#endif /* __SOUND_MPU401_H */
diff --git a/include/sound/opl3.h b/include/sound/opl3.h
new file mode 100644
index 000000000000..19f657d4fc06
--- /dev/null
+++ b/include/sound/opl3.h
@@ -0,0 +1,339 @@
+#ifndef __SOUND_OPL3_H
+#define __SOUND_OPL3_H
+
+/*
+ * Definitions of the OPL-3 registers.
+ *
+ * Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *                  Hannu Savolainen 1993-1996
+ *
+ *
+ *      The OPL-3 mode is switched on by writing 0x01, to the offset 5
+ *      of the right side.
+ *
+ *      Another special register at the right side is at offset 4. It contains
+ *      a bit mask defining which voices are used as 4 OP voices.
+ *
+ *      The percussive mode is implemented in the left side only.
+ *
+ *      With the above exceptions the both sides can be operated independently.
+ *      
+ *      A 4 OP voice can be created by setting the corresponding
+ *      bit at offset 4 of the right side.
+ *
+ *      For example setting the rightmost bit (0x01) changes the
+ *      first voice on the right side to the 4 OP mode. The fourth
+ *      voice is made inaccessible.
+ *
+ *      If a voice is set to the 2 OP mode, it works like 2 OP modes
+ *      of the original YM3812 (AdLib). In addition the voice can 
+ *      be connected the left, right or both stereo channels. It can
+ *      even be left unconnected. This works with 4 OP voices also.
+ *
+ *      The stereo connection bits are located in the FEEDBACK_CONNECTION
+ *      register of the voice (0xC0-0xC8). In 4 OP voices these bits are
+ *      in the second half of the voice.
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "driver.h"
+#include <linux/time.h>
+#include "core.h"
+#include "hwdep.h"
+#include "timer.h"
+#include "seq_midi_emul.h"
+#ifdef CONFIG_SND_SEQUENCER_OSS
+#include "seq_oss.h"
+#include "seq_oss_legacy.h"
+#endif
+#include "seq_device.h"
+#include "ainstr_fm.h"
+
+/*
+ *    Register numbers for the global registers
+ */
+
+#define OPL3_REG_TEST			0x01
+#define   OPL3_ENABLE_WAVE_SELECT	0x20
+
+#define OPL3_REG_TIMER1			0x02
+#define OPL3_REG_TIMER2			0x03
+#define OPL3_REG_TIMER_CONTROL		0x04	/* Left side */
+#define   OPL3_IRQ_RESET		0x80
+#define   OPL3_TIMER1_MASK		0x40
+#define   OPL3_TIMER2_MASK		0x20
+#define   OPL3_TIMER1_START		0x01
+#define   OPL3_TIMER2_START		0x02
+
+#define OPL3_REG_CONNECTION_SELECT	0x04	/* Right side */
+#define   OPL3_LEFT_4OP_0		0x01
+#define   OPL3_LEFT_4OP_1		0x02
+#define   OPL3_LEFT_4OP_2		0x04
+#define   OPL3_RIGHT_4OP_0		0x08
+#define   OPL3_RIGHT_4OP_1		0x10
+#define   OPL3_RIGHT_4OP_2		0x20
+
+#define OPL3_REG_MODE			0x05	/* Right side */
+#define   OPL3_OPL3_ENABLE		0x01	/* OPL3 mode */
+#define   OPL3_OPL4_ENABLE		0x02	/* OPL4 mode */
+
+#define OPL3_REG_KBD_SPLIT		0x08	/* Left side */
+#define   OPL3_COMPOSITE_SINE_WAVE_MODE	0x80	/* Don't use with OPL-3? */
+#define   OPL3_KEYBOARD_SPLIT		0x40
+
+#define OPL3_REG_PERCUSSION		0xbd	/* Left side only */
+#define   OPL3_TREMOLO_DEPTH		0x80
+#define   OPL3_VIBRATO_DEPTH		0x40
+#define	  OPL3_PERCUSSION_ENABLE	0x20
+#define   OPL3_BASSDRUM_ON		0x10
+#define   OPL3_SNAREDRUM_ON		0x08
+#define   OPL3_TOMTOM_ON		0x04
+#define   OPL3_CYMBAL_ON		0x02
+#define   OPL3_HIHAT_ON			0x01
+
+/*
+ *    Offsets to the register banks for operators. To get the
+ *      register number just add the operator offset to the bank offset
+ *
+ *      AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
+ */
+#define OPL3_REG_AM_VIB			0x20
+#define   OPL3_TREMOLO_ON		0x80
+#define   OPL3_VIBRATO_ON		0x40
+#define   OPL3_SUSTAIN_ON		0x20
+#define   OPL3_KSR			0x10	/* Key scaling rate */
+#define   OPL3_MULTIPLE_MASK		0x0f	/* Frequency multiplier */
+
+ /*
+  *   KSL/Total level (0x40 to 0x55)
+  */
+#define OPL3_REG_KSL_LEVEL		0x40
+#define   OPL3_KSL_MASK			0xc0	/* Envelope scaling bits */
+#define   OPL3_TOTAL_LEVEL_MASK		0x3f	/* Strength (volume) of OP */
+
+/*
+ *    Attack / Decay rate (0x60 to 0x75)
+ */
+#define OPL3_REG_ATTACK_DECAY		0x60
+#define   OPL3_ATTACK_MASK		0xf0
+#define   OPL3_DECAY_MASK		0x0f
+
+/*
+ * Sustain level / Release rate (0x80 to 0x95)
+ */
+#define OPL3_REG_SUSTAIN_RELEASE	0x80
+#define   OPL3_SUSTAIN_MASK		0xf0
+#define   OPL3_RELEASE_MASK		0x0f
+
+/*
+ * Wave select (0xE0 to 0xF5)
+ */
+#define OPL3_REG_WAVE_SELECT		0xe0
+#define   OPL3_WAVE_SELECT_MASK		0x07
+
+/*
+ *    Offsets to the register banks for voices. Just add to the
+ *      voice number to get the register number.
+ *
+ *      F-Number low bits (0xA0 to 0xA8).
+ */
+#define OPL3_REG_FNUM_LOW		0xa0
+
+/*
+ *    F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
+ */
+#define OPL3_REG_KEYON_BLOCK		0xb0
+#define	  OPL3_KEYON_BIT		0x20
+#define	  OPL3_BLOCKNUM_MASK		0x1c
+#define   OPL3_FNUM_HIGH_MASK		0x03
+
+/*
+ *    Feedback / Connection (0xc0 to 0xc8)
+ *
+ *      These registers have two new bits when the OPL-3 mode
+ *      is selected. These bits controls connecting the voice
+ *      to the stereo channels. For 4 OP voices this bit is
+ *      defined in the second half of the voice (add 3 to the
+ *      register offset).
+ *
+ *      For 4 OP voices the connection bit is used in the
+ *      both halves (gives 4 ways to connect the operators).
+ */
+#define OPL3_REG_FEEDBACK_CONNECTION	0xc0
+#define   OPL3_FEEDBACK_MASK		0x0e	/* Valid just for 1st OP of a voice */
+#define   OPL3_CONNECTION_BIT		0x01
+/*
+ *    In the 4 OP mode there is four possible configurations how the
+ *      operators can be connected together (in 2 OP modes there is just
+ *      AM or FM). The 4 OP connection mode is defined by the rightmost
+ *      bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
+ *
+ *      First half      Second half     Mode
+ *
+ *                                       +---+
+ *                                       v   |
+ *      0               0               >+-1-+--2--3--4-->
+ *
+ *
+ *                                      
+ *                                       +---+
+ *                                       |   |
+ *      0               1               >+-1-+--2-+
+ *                                                |->
+ *                                      >--3----4-+
+ *                                      
+ *                                       +---+
+ *                                       |   |
+ *      1               0               >+-1-+-----+
+ *                                                 |->
+ *                                      >--2--3--4-+
+ *
+ *                                       +---+
+ *                                       |   |
+ *      1               1               >+-1-+--+
+ *                                              |
+ *                                      >--2--3-+->
+ *                                              |
+ *                                      >--4----+
+ */
+#define   OPL3_STEREO_BITS		0x30	/* OPL-3 only */
+#define     OPL3_VOICE_TO_LEFT		0x10
+#define     OPL3_VOICE_TO_RIGHT		0x20
+
+/*
+
+ */
+
+#define OPL3_LEFT		0x0000
+#define OPL3_RIGHT		0x0100
+
+#define OPL3_HW_AUTO		0x0000
+#define OPL3_HW_OPL2		0x0200
+#define OPL3_HW_OPL3		0x0300
+#define OPL3_HW_OPL3_SV		0x0301	/* S3 SonicVibes */
+#define OPL3_HW_OPL3_CS		0x0302	/* CS4232/CS4236+ */
+#define OPL3_HW_OPL3_FM801	0x0303	/* FM801 */
+#define OPL3_HW_OPL3_CS4281	0x0304	/* CS4281 */
+#define OPL3_HW_OPL3_PC98	0x0305	/* PC9800 */
+#define OPL3_HW_OPL4		0x0400	/* YMF278B/YMF295 */
+#define OPL3_HW_OPL4_ML		0x0401	/* YMF704/YMF721 */
+#define OPL3_HW_MASK		0xff00
+
+#define MAX_OPL2_VOICES		9
+#define MAX_OPL3_VOICES		18
+
+typedef struct snd_opl3 opl3_t;
+
+/*
+ * A structure to keep track of each hardware voice
+ */
+typedef struct snd_opl3_voice {
+	int  state;		/* status */
+#define SNDRV_OPL3_ST_OFF		0	/* Not playing */
+#define SNDRV_OPL3_ST_ON_2OP	1	/* 2op voice is allocated */
+#define SNDRV_OPL3_ST_ON_4OP	2	/* 4op voice is allocated */
+#define SNDRV_OPL3_ST_NOT_AVAIL	-1	/* voice is not available */
+
+	unsigned int time;	/* An allocation time */
+	unsigned char note;	/* Note currently assigned to this voice */
+
+	unsigned long note_off;	/* note-off time */
+	int note_off_check;	/* check note-off time */
+
+	unsigned char keyon_reg;	/* KON register shadow */
+
+	snd_midi_channel_t *chan;	/* Midi channel for this note */
+} snd_opl3_voice_t;
+
+struct snd_opl3 {
+	unsigned long l_port;
+	unsigned long r_port;
+	struct resource *res_l_port;
+	struct resource *res_r_port;
+	unsigned short hardware;
+	/* hardware access */
+	void (*command) (opl3_t * opl3, unsigned short cmd, unsigned char val);
+	unsigned short timer_enable;
+	int seq_dev_num;	/* sequencer device number */
+	snd_timer_t *timer1;
+	snd_timer_t *timer2;
+	spinlock_t timer_lock;
+
+	void *private_data;
+	void (*private_free)(opl3_t *);
+
+	spinlock_t reg_lock;
+	snd_card_t *card;		/* The card that this belongs to */
+	int used;			/* usage flag - exclusive */
+	unsigned char fm_mode;		/* OPL mode, see SNDRV_DM_FM_MODE_XXX */
+	unsigned char rhythm;		/* percussion mode flag */
+	unsigned char max_voices;	/* max number of voices */
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#define SNDRV_OPL3_MODE_SYNTH 0		/* OSS - voices allocated by application */
+#define SNDRV_OPL3_MODE_SEQ 1		/* ALSA - driver handles voice allocation */
+	int synth_mode;			/* synth mode */
+	int seq_client;
+
+	snd_seq_device_t *seq_dev;	/* sequencer device */
+	snd_midi_channel_set_t * chset;
+
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	snd_seq_device_t *oss_seq_dev;	/* OSS sequencer device */
+	snd_midi_channel_set_t * oss_chset;
+#endif
+ 
+	snd_seq_kinstr_ops_t fm_ops;
+	snd_seq_kinstr_list_t *ilist;
+
+	snd_opl3_voice_t voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */
+	int use_time;			/* allocation counter */
+
+	unsigned short connection_reg;	/* connection reg shadow */
+	unsigned char drum_reg;		/* percussion reg shadow */
+
+	spinlock_t voice_lock;		/* Lock for voice access */
+
+	struct timer_list tlist;	/* timer for note-offs and effects */
+	int sys_timer_status;		/* system timer run status */
+	spinlock_t sys_timer_lock;	/* Lock for system timer access */
+#endif
+	struct semaphore access_mutex;	/* locking */
+};
+
+/* opl3.c */
+void snd_opl3_interrupt(snd_hwdep_t * hw);
+int snd_opl3_new(snd_card_t *card, unsigned short hardware, opl3_t **ropl3);
+int snd_opl3_init(opl3_t *opl3);
+int snd_opl3_create(snd_card_t * card,
+		    unsigned long l_port, unsigned long r_port,
+		    unsigned short hardware,
+		    int integrated,
+		    opl3_t ** opl3);
+int snd_opl3_timer_new(opl3_t * opl3, int timer1_dev, int timer2_dev);
+int snd_opl3_hwdep_new(opl3_t * opl3, int device, int seq_device,
+		       snd_hwdep_t ** rhwdep);
+
+/* opl3_synth */
+int snd_opl3_open(snd_hwdep_t * hw, struct file *file);
+int snd_opl3_ioctl(snd_hwdep_t * hw, struct file *file,
+		   unsigned int cmd, unsigned long arg);
+int snd_opl3_release(snd_hwdep_t * hw, struct file *file);
+
+void snd_opl3_reset(opl3_t * opl3);
+
+#endif /* __SOUND_OPL3_H */
diff --git a/include/sound/opl4.h b/include/sound/opl4.h
new file mode 100644
index 000000000000..20c04428b139
--- /dev/null
+++ b/include/sound/opl4.h
@@ -0,0 +1,32 @@
+#ifndef __SOUND_OPL4_H
+#define __SOUND_OPL4_H
+
+/*
+ * Global definitions for the OPL4 driver
+ * Copyright (c) 2003 by Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <sound/opl3.h>
+
+typedef struct opl4 opl4_t;
+
+extern int snd_opl4_create(snd_card_t *card,
+			   unsigned long fm_port, unsigned long pcm_port,
+			   int seq_device,
+			   opl3_t **opl3, opl4_t **opl4);
+
+#endif /* __SOUND_OPL4_H */
diff --git a/include/sound/pcm-indirect.h b/include/sound/pcm-indirect.h
new file mode 100644
index 000000000000..31fa7a54508a
--- /dev/null
+++ b/include/sound/pcm-indirect.h
@@ -0,0 +1,177 @@
+/*
+ * Helper functions for indirect PCM data transfer
+ *
+ *  Copyright (c) by Takashi Iwai <tiwai@suse.de>
+ *                   Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __SOUND_PCM_INDIRECT_H
+#define __SOUND_PCM_INDIRECT_H
+
+#include <sound/pcm.h>
+
+typedef struct sndrv_pcm_indirect {
+	unsigned int hw_buffer_size;	/* Byte size of hardware buffer */
+	unsigned int hw_queue_size;	/* Max queue size of hw buffer (0 = buffer size) */
+	unsigned int hw_data;	/* Offset to next dst (or src) in hw ring buffer */
+	unsigned int hw_io;	/* Ring buffer hw pointer */
+	int hw_ready;		/* Bytes ready for play (or captured) in hw ring buffer */
+	unsigned int sw_buffer_size;	/* Byte size of software buffer */
+	unsigned int sw_data;	/* Offset to next dst (or src) in sw ring buffer */
+	unsigned int sw_io;	/* Current software pointer in bytes */
+	int sw_ready;		/* Bytes ready to be transferred to/from hw */
+	snd_pcm_uframes_t appl_ptr;	/* Last seen appl_ptr */
+} snd_pcm_indirect_t;
+
+typedef void (*snd_pcm_indirect_copy_t)(snd_pcm_substream_t *substream,
+					snd_pcm_indirect_t *rec, size_t bytes);
+
+/*
+ * helper function for playback ack callback
+ */
+static inline void
+snd_pcm_indirect_playback_transfer(snd_pcm_substream_t *substream,
+				   snd_pcm_indirect_t *rec,
+				   snd_pcm_indirect_copy_t copy)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_pcm_uframes_t appl_ptr = runtime->control->appl_ptr;
+	snd_pcm_sframes_t diff = appl_ptr - rec->appl_ptr;
+	int qsize;
+
+	if (diff) {
+		if (diff < -(snd_pcm_sframes_t) (runtime->boundary / 2))
+			diff += runtime->boundary;
+		rec->sw_ready += (int)frames_to_bytes(runtime, diff);
+		rec->appl_ptr = appl_ptr;
+	}
+	qsize = rec->hw_queue_size ? rec->hw_queue_size : rec->hw_buffer_size;
+	while (rec->hw_ready < qsize && rec->sw_ready > 0) {
+		unsigned int hw_to_end = rec->hw_buffer_size - rec->hw_data;
+		unsigned int sw_to_end = rec->sw_buffer_size - rec->sw_data;
+		unsigned int bytes = qsize - rec->hw_ready;
+		if (rec->sw_ready < (int)bytes)
+			bytes = rec->sw_ready;
+		if (hw_to_end < bytes)
+			bytes = hw_to_end;
+		if (sw_to_end < bytes)
+			bytes = sw_to_end;
+		if (! bytes)
+			break;
+		copy(substream, rec, bytes);
+		rec->hw_data += bytes;
+		if (rec->hw_data == rec->hw_buffer_size)
+			rec->hw_data = 0;
+		rec->sw_data += bytes;
+		if (rec->sw_data == rec->sw_buffer_size)
+			rec->sw_data = 0;
+		rec->hw_ready += bytes;
+		rec->sw_ready -= bytes;
+	}
+}
+
+/*
+ * helper function for playback pointer callback
+ * ptr = current byte pointer
+ */
+static inline snd_pcm_uframes_t
+snd_pcm_indirect_playback_pointer(snd_pcm_substream_t *substream,
+				  snd_pcm_indirect_t *rec, unsigned int ptr)
+{
+	int bytes = ptr - rec->hw_io;
+	if (bytes < 0)
+		bytes += rec->hw_buffer_size;
+	rec->hw_io = ptr;
+	rec->hw_ready -= bytes;
+	rec->sw_io += bytes;
+	if (rec->sw_io >= rec->sw_buffer_size)
+		rec->sw_io -= rec->sw_buffer_size;
+	if (substream->ops->ack)
+		substream->ops->ack(substream);
+	return bytes_to_frames(substream->runtime, rec->sw_io);
+}
+
+
+/*
+ * helper function for capture ack callback
+ */
+static inline void
+snd_pcm_indirect_capture_transfer(snd_pcm_substream_t *substream,
+				  snd_pcm_indirect_t *rec,
+				  snd_pcm_indirect_copy_t copy)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_pcm_uframes_t appl_ptr = runtime->control->appl_ptr;
+	snd_pcm_sframes_t diff = appl_ptr - rec->appl_ptr;
+
+	if (diff) {
+		if (diff < -(snd_pcm_sframes_t) (runtime->boundary / 2))
+			diff += runtime->boundary;
+		rec->sw_ready -= frames_to_bytes(runtime, diff);
+		rec->appl_ptr = appl_ptr;
+	}
+	while (rec->hw_ready > 0 && 
+	       rec->sw_ready < (int)rec->sw_buffer_size) {
+		size_t hw_to_end = rec->hw_buffer_size - rec->hw_data;
+		size_t sw_to_end = rec->sw_buffer_size - rec->sw_data;
+		size_t bytes = rec->sw_buffer_size - rec->sw_ready;
+		if (rec->hw_ready < (int)bytes)
+			bytes = rec->hw_ready;
+		if (hw_to_end < bytes)
+			bytes = hw_to_end;
+		if (sw_to_end < bytes)
+			bytes = sw_to_end;
+		if (! bytes)
+			break;
+		copy(substream, rec, bytes);
+		rec->hw_data += bytes;
+		if ((int)rec->hw_data == rec->hw_buffer_size)
+			rec->hw_data = 0;
+		rec->sw_data += bytes;
+		if (rec->sw_data == rec->sw_buffer_size)
+			rec->sw_data = 0;
+		rec->hw_ready -= bytes;
+		rec->sw_ready += bytes;
+	}
+}
+
+/*
+ * helper function for capture pointer callback,
+ * ptr = current byte pointer
+ */
+static inline snd_pcm_uframes_t
+snd_pcm_indirect_capture_pointer(snd_pcm_substream_t *substream,
+				 snd_pcm_indirect_t *rec, unsigned int ptr)
+{
+	int qsize;
+	int bytes = ptr - rec->hw_io;
+	if (bytes < 0)
+		bytes += rec->hw_buffer_size;
+	rec->hw_io = ptr;
+	rec->hw_ready += bytes;
+	qsize = rec->hw_queue_size ? rec->hw_queue_size : rec->hw_buffer_size;
+	if (rec->hw_ready > qsize)
+		return SNDRV_PCM_POS_XRUN;
+	rec->sw_io += bytes;
+	if (rec->sw_io >= rec->sw_buffer_size)
+		rec->sw_io -= rec->sw_buffer_size;
+	if (substream->ops->ack)
+		substream->ops->ack(substream);
+	return bytes_to_frames(substream->runtime, rec->sw_io);
+}
+
+#endif /* __SOUND_PCM_INDIRECT_H */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
new file mode 100644
index 000000000000..53fc04d75bad
--- /dev/null
+++ b/include/sound/pcm.h
@@ -0,0 +1,1040 @@
+#ifndef __SOUND_PCM_H
+#define __SOUND_PCM_H
+
+/*
+ *  Digital Audio (PCM) abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *                   Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <sound/memalloc.h>
+#include <linux/poll.h>
+#include <linux/bitops.h>
+
+typedef sndrv_pcm_uframes_t snd_pcm_uframes_t;
+typedef sndrv_pcm_sframes_t snd_pcm_sframes_t;
+typedef enum sndrv_pcm_class snd_pcm_class_t;
+typedef enum sndrv_pcm_subclass snd_pcm_subclass_t;
+typedef enum sndrv_pcm_stream snd_pcm_stream_t;
+typedef enum sndrv_pcm_access snd_pcm_access_t;
+typedef enum sndrv_pcm_format snd_pcm_format_t;
+typedef enum sndrv_pcm_subformat snd_pcm_subformat_t;
+typedef enum sndrv_pcm_state snd_pcm_state_t;
+typedef union sndrv_pcm_sync_id snd_pcm_sync_id_t;
+typedef struct sndrv_pcm_info snd_pcm_info_t;
+typedef enum sndrv_pcm_hw_param snd_pcm_hw_param_t;
+typedef struct sndrv_pcm_hw_params snd_pcm_hw_params_t;
+typedef enum sndrv_pcm_start snd_pcm_start_t;
+typedef enum sndrv_pcm_xrun snd_pcm_xrun_t;
+typedef enum sndrv_pcm_tstamp snd_pcm_tstamp_t;
+typedef struct sndrv_pcm_sw_params snd_pcm_sw_params_t;
+typedef struct sndrv_pcm_channel_info snd_pcm_channel_info_t;
+typedef struct sndrv_pcm_status snd_pcm_status_t;
+typedef struct sndrv_pcm_mmap_status snd_pcm_mmap_status_t;
+typedef struct sndrv_pcm_mmap_control snd_pcm_mmap_control_t;
+typedef struct sndrv_mask snd_mask_t;
+typedef struct snd_sg_buf snd_pcm_sgbuf_t;
+
+#define snd_pcm_substream_chip(substream) ((substream)->private_data)
+#define snd_pcm_chip(pcm) ((pcm)->private_data)
+
+typedef struct _snd_pcm_file snd_pcm_file_t;
+typedef struct _snd_pcm_runtime snd_pcm_runtime_t;
+
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+#include "pcm_oss.h"
+#endif
+
+/*
+ *  Hardware (lowlevel) section
+ */
+
+typedef struct _snd_pcm_hardware {
+	unsigned int info;		/* SNDRV_PCM_INFO_* */
+	u64 formats;			/* SNDRV_PCM_FMTBIT_* */
+	unsigned int rates;		/* SNDRV_PCM_RATE_* */
+	unsigned int rate_min;		/* min rate */
+	unsigned int rate_max;		/* max rate */
+	unsigned int channels_min;	/* min channels */
+	unsigned int channels_max;	/* max channels */
+	size_t buffer_bytes_max;	/* max buffer size */
+	size_t period_bytes_min;	/* min period size */
+	size_t period_bytes_max;	/* max period size */
+	unsigned int periods_min;	/* min # of periods */
+	unsigned int periods_max;	/* max # of periods */
+	size_t fifo_size;		/* fifo size in bytes */
+} snd_pcm_hardware_t;
+
+typedef struct _snd_pcm_ops {
+	int (*open)(snd_pcm_substream_t *substream);
+	int (*close)(snd_pcm_substream_t *substream);
+	int (*ioctl)(snd_pcm_substream_t * substream,
+		     unsigned int cmd, void *arg);
+	int (*hw_params)(snd_pcm_substream_t * substream, snd_pcm_hw_params_t * params);
+	int (*hw_free)(snd_pcm_substream_t *substream);
+	int (*prepare)(snd_pcm_substream_t * substream);
+	int (*trigger)(snd_pcm_substream_t * substream, int cmd);
+	snd_pcm_uframes_t (*pointer)(snd_pcm_substream_t * substream);
+	int (*copy)(snd_pcm_substream_t *substream, int channel, snd_pcm_uframes_t pos,
+		    void __user *buf, snd_pcm_uframes_t count);
+	int (*silence)(snd_pcm_substream_t *substream, int channel, 
+		       snd_pcm_uframes_t pos, snd_pcm_uframes_t count);
+	struct page *(*page)(snd_pcm_substream_t *substream, unsigned long offset);
+	int (*mmap)(snd_pcm_substream_t *substream, struct vm_area_struct *vma);
+	int (*ack)(snd_pcm_substream_t *substream);
+} snd_pcm_ops_t;
+
+/*
+ *
+ */
+
+#define SNDRV_PCM_DEVICES		8
+
+#define SNDRV_PCM_IOCTL1_FALSE		((void *)0)
+#define SNDRV_PCM_IOCTL1_TRUE		((void *)1)
+
+#define SNDRV_PCM_IOCTL1_RESET		0
+#define SNDRV_PCM_IOCTL1_INFO		1
+#define SNDRV_PCM_IOCTL1_CHANNEL_INFO	2
+#define SNDRV_PCM_IOCTL1_GSTATE		3
+
+#define SNDRV_PCM_TRIGGER_STOP		0
+#define SNDRV_PCM_TRIGGER_START		1
+#define SNDRV_PCM_TRIGGER_PAUSE_PUSH	3
+#define SNDRV_PCM_TRIGGER_PAUSE_RELEASE	4
+#define SNDRV_PCM_TRIGGER_SUSPEND	5
+#define SNDRV_PCM_TRIGGER_RESUME	6
+
+#define SNDRV_PCM_POS_XRUN		((snd_pcm_uframes_t)-1)
+
+/* If you change this don't forget to change rates[] table in pcm_native.c */
+#define SNDRV_PCM_RATE_5512		(1<<0)		/* 5512Hz */
+#define SNDRV_PCM_RATE_8000		(1<<1)		/* 8000Hz */
+#define SNDRV_PCM_RATE_11025		(1<<2)		/* 11025Hz */
+#define SNDRV_PCM_RATE_16000		(1<<3)		/* 16000Hz */
+#define SNDRV_PCM_RATE_22050		(1<<4)		/* 22050Hz */
+#define SNDRV_PCM_RATE_32000		(1<<5)		/* 32000Hz */
+#define SNDRV_PCM_RATE_44100		(1<<6)		/* 44100Hz */
+#define SNDRV_PCM_RATE_48000		(1<<7)		/* 48000Hz */
+#define SNDRV_PCM_RATE_64000		(1<<8)		/* 64000Hz */
+#define SNDRV_PCM_RATE_88200		(1<<9)		/* 88200Hz */
+#define SNDRV_PCM_RATE_96000		(1<<10)		/* 96000Hz */
+#define SNDRV_PCM_RATE_176400		(1<<11)		/* 176400Hz */
+#define SNDRV_PCM_RATE_192000		(1<<12)		/* 192000Hz */
+
+#define SNDRV_PCM_RATE_CONTINUOUS	(1<<30)		/* continuous range */
+#define SNDRV_PCM_RATE_KNOT		(1<<31)		/* supports more non-continuos rates */
+
+#define SNDRV_PCM_RATE_8000_44100	(SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_11025|\
+					 SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_22050|\
+					 SNDRV_PCM_RATE_32000|SNDRV_PCM_RATE_44100)
+#define SNDRV_PCM_RATE_8000_48000	(SNDRV_PCM_RATE_8000_44100|SNDRV_PCM_RATE_48000)
+#define SNDRV_PCM_RATE_8000_96000	(SNDRV_PCM_RATE_8000_48000|SNDRV_PCM_RATE_64000|\
+					 SNDRV_PCM_RATE_88200|SNDRV_PCM_RATE_96000)
+#define SNDRV_PCM_RATE_8000_192000	(SNDRV_PCM_RATE_8000_96000|SNDRV_PCM_RATE_176400|\
+					 SNDRV_PCM_RATE_192000)
+#define SNDRV_PCM_FMTBIT_S8		(1ULL << SNDRV_PCM_FORMAT_S8)
+#define SNDRV_PCM_FMTBIT_U8		(1ULL << SNDRV_PCM_FORMAT_U8)
+#define SNDRV_PCM_FMTBIT_S16_LE		(1ULL << SNDRV_PCM_FORMAT_S16_LE)
+#define SNDRV_PCM_FMTBIT_S16_BE		(1ULL << SNDRV_PCM_FORMAT_S16_BE)
+#define SNDRV_PCM_FMTBIT_U16_LE		(1ULL << SNDRV_PCM_FORMAT_U16_LE)
+#define SNDRV_PCM_FMTBIT_U16_BE		(1ULL << SNDRV_PCM_FORMAT_U16_BE)
+#define SNDRV_PCM_FMTBIT_S24_LE		(1ULL << SNDRV_PCM_FORMAT_S24_LE)
+#define SNDRV_PCM_FMTBIT_S24_BE		(1ULL << SNDRV_PCM_FORMAT_S24_BE)
+#define SNDRV_PCM_FMTBIT_U24_LE		(1ULL << SNDRV_PCM_FORMAT_U24_LE)
+#define SNDRV_PCM_FMTBIT_U24_BE		(1ULL << SNDRV_PCM_FORMAT_U24_BE)
+#define SNDRV_PCM_FMTBIT_S32_LE		(1ULL << SNDRV_PCM_FORMAT_S32_LE)
+#define SNDRV_PCM_FMTBIT_S32_BE		(1ULL << SNDRV_PCM_FORMAT_S32_BE)
+#define SNDRV_PCM_FMTBIT_U32_LE		(1ULL << SNDRV_PCM_FORMAT_U32_LE)
+#define SNDRV_PCM_FMTBIT_U32_BE		(1ULL << SNDRV_PCM_FORMAT_U32_BE)
+#define SNDRV_PCM_FMTBIT_FLOAT_LE	(1ULL << SNDRV_PCM_FORMAT_FLOAT_LE)
+#define SNDRV_PCM_FMTBIT_FLOAT_BE	(1ULL << SNDRV_PCM_FORMAT_FLOAT_BE)
+#define SNDRV_PCM_FMTBIT_FLOAT64_LE	(1ULL << SNDRV_PCM_FORMAT_FLOAT64_LE)
+#define SNDRV_PCM_FMTBIT_FLOAT64_BE	(1ULL << SNDRV_PCM_FORMAT_FLOAT64_BE)
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE (1ULL << SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE)
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE (1ULL << SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE)
+#define SNDRV_PCM_FMTBIT_MU_LAW		(1ULL << SNDRV_PCM_FORMAT_MU_LAW)
+#define SNDRV_PCM_FMTBIT_A_LAW		(1ULL << SNDRV_PCM_FORMAT_A_LAW)
+#define SNDRV_PCM_FMTBIT_IMA_ADPCM	(1ULL << SNDRV_PCM_FORMAT_IMA_ADPCM)
+#define SNDRV_PCM_FMTBIT_MPEG		(1ULL << SNDRV_PCM_FORMAT_MPEG)
+#define SNDRV_PCM_FMTBIT_GSM		(1ULL << SNDRV_PCM_FORMAT_GSM)
+#define SNDRV_PCM_FMTBIT_SPECIAL	(1ULL << SNDRV_PCM_FORMAT_SPECIAL)
+#define SNDRV_PCM_FMTBIT_S24_3LE	(1ULL << SNDRV_PCM_FORMAT_S24_3LE)
+#define SNDRV_PCM_FMTBIT_U24_3LE	(1ULL << SNDRV_PCM_FORMAT_U24_3LE)
+#define SNDRV_PCM_FMTBIT_S24_3BE	(1ULL << SNDRV_PCM_FORMAT_S24_3BE)
+#define SNDRV_PCM_FMTBIT_U24_3BE	(1ULL << SNDRV_PCM_FORMAT_U24_3BE)
+#define SNDRV_PCM_FMTBIT_S20_3LE	(1ULL << SNDRV_PCM_FORMAT_S20_3LE)
+#define SNDRV_PCM_FMTBIT_U20_3LE	(1ULL << SNDRV_PCM_FORMAT_U20_3LE)
+#define SNDRV_PCM_FMTBIT_S20_3BE	(1ULL << SNDRV_PCM_FORMAT_S20_3BE)
+#define SNDRV_PCM_FMTBIT_U20_3BE	(1ULL << SNDRV_PCM_FORMAT_U20_3BE)
+#define SNDRV_PCM_FMTBIT_S18_3LE	(1ULL << SNDRV_PCM_FORMAT_S18_3LE)
+#define SNDRV_PCM_FMTBIT_U18_3LE	(1ULL << SNDRV_PCM_FORMAT_U18_3LE)
+#define SNDRV_PCM_FMTBIT_S18_3BE	(1ULL << SNDRV_PCM_FORMAT_S18_3BE)
+#define SNDRV_PCM_FMTBIT_U18_3BE	(1ULL << SNDRV_PCM_FORMAT_U18_3BE)
+
+#ifdef SNDRV_LITTLE_ENDIAN
+#define SNDRV_PCM_FMTBIT_S16		SNDRV_PCM_FMTBIT_S16_LE
+#define SNDRV_PCM_FMTBIT_U16		SNDRV_PCM_FMTBIT_U16_LE
+#define SNDRV_PCM_FMTBIT_S24		SNDRV_PCM_FMTBIT_S24_LE
+#define SNDRV_PCM_FMTBIT_U24		SNDRV_PCM_FMTBIT_U24_LE
+#define SNDRV_PCM_FMTBIT_S32		SNDRV_PCM_FMTBIT_S32_LE
+#define SNDRV_PCM_FMTBIT_U32		SNDRV_PCM_FMTBIT_U32_LE
+#define SNDRV_PCM_FMTBIT_FLOAT		SNDRV_PCM_FMTBIT_FLOAT_LE
+#define SNDRV_PCM_FMTBIT_FLOAT64	SNDRV_PCM_FMTBIT_FLOAT64_LE
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+#define SNDRV_PCM_FMTBIT_S16		SNDRV_PCM_FMTBIT_S16_BE
+#define SNDRV_PCM_FMTBIT_U16		SNDRV_PCM_FMTBIT_U16_BE
+#define SNDRV_PCM_FMTBIT_S24		SNDRV_PCM_FMTBIT_S24_BE
+#define SNDRV_PCM_FMTBIT_U24		SNDRV_PCM_FMTBIT_U24_BE
+#define SNDRV_PCM_FMTBIT_S32		SNDRV_PCM_FMTBIT_S32_BE
+#define SNDRV_PCM_FMTBIT_U32		SNDRV_PCM_FMTBIT_U32_BE
+#define SNDRV_PCM_FMTBIT_FLOAT		SNDRV_PCM_FMTBIT_FLOAT_BE
+#define SNDRV_PCM_FMTBIT_FLOAT64	SNDRV_PCM_FMTBIT_FLOAT64_BE
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE
+#endif
+
+struct _snd_pcm_file {
+	snd_pcm_substream_t * substream;
+	struct _snd_pcm_file * next;
+};
+
+typedef struct _snd_pcm_hw_rule snd_pcm_hw_rule_t;
+
+typedef int (*snd_pcm_hw_rule_func_t)(snd_pcm_hw_params_t *params,
+				      snd_pcm_hw_rule_t *rule);
+
+struct _snd_pcm_hw_rule {
+	unsigned int cond;
+	snd_pcm_hw_rule_func_t func;
+	int var;
+	int deps[4];
+	void *private;
+};
+
+typedef struct _snd_pcm_hw_constraints {
+	snd_mask_t masks[SNDRV_PCM_HW_PARAM_LAST_MASK - 
+			 SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	snd_interval_t intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+			     SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	unsigned int rules_num;
+	unsigned int rules_all;
+	snd_pcm_hw_rule_t *rules;
+} snd_pcm_hw_constraints_t;
+
+static inline snd_mask_t *constrs_mask(snd_pcm_hw_constraints_t *constrs,
+				       snd_pcm_hw_param_t var)
+{
+	return &constrs->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK];
+}
+
+static inline snd_interval_t *constrs_interval(snd_pcm_hw_constraints_t *constrs,
+					  snd_pcm_hw_param_t var)
+{
+	return &constrs->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL];
+}
+
+typedef struct {
+	unsigned int num;
+	unsigned int den_min, den_max, den_step;
+} ratnum_t;
+
+typedef struct {
+	unsigned int num_min, num_max, num_step;
+	unsigned int den;
+} ratden_t;
+
+typedef struct {
+	int nrats;
+	ratnum_t *rats;
+} snd_pcm_hw_constraint_ratnums_t;
+
+typedef struct {
+	int nrats;
+	ratden_t *rats;
+} snd_pcm_hw_constraint_ratdens_t;
+
+typedef struct {
+	unsigned int count;
+	unsigned int *list;
+	unsigned int mask;
+} snd_pcm_hw_constraint_list_t;
+
+struct _snd_pcm_runtime {
+	/* -- Status -- */
+	snd_pcm_substream_t *trigger_master;
+	snd_timestamp_t trigger_tstamp;	/* trigger timestamp */
+	int overrange;
+	snd_pcm_uframes_t avail_max;
+	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
+	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+
+	/* -- HW params -- */
+	snd_pcm_access_t access;	/* access mode */
+	snd_pcm_format_t format;	/* SNDRV_PCM_FORMAT_* */
+	snd_pcm_subformat_t subformat;	/* subformat */
+	unsigned int rate;		/* rate in Hz */
+	unsigned int channels;		/* channels */
+	snd_pcm_uframes_t period_size;	/* period size */
+	unsigned int periods;		/* periods */
+	snd_pcm_uframes_t buffer_size;	/* buffer size */
+	unsigned int tick_time;		/* tick time */
+	snd_pcm_uframes_t min_align;	/* Min alignment for the format */
+	size_t byte_align;
+	unsigned int frame_bits;
+	unsigned int sample_bits;
+	unsigned int info;
+	unsigned int rate_num;
+	unsigned int rate_den;
+
+	/* -- SW params -- */
+	int tstamp_timespec;		/* use timeval (0) or timespec (1) */
+	snd_pcm_tstamp_t tstamp_mode;	/* mmap timestamp is updated */
+  	unsigned int period_step;
+	unsigned int sleep_min;		/* min ticks to sleep */
+	snd_pcm_uframes_t xfer_align;	/* xfer size need to be a multiple */
+	snd_pcm_uframes_t start_threshold;
+	snd_pcm_uframes_t stop_threshold;
+	snd_pcm_uframes_t silence_threshold; /* Silence filling happens when
+						noise is nearest than this */
+	snd_pcm_uframes_t silence_size;	/* Silence filling size */
+	snd_pcm_uframes_t boundary;	/* pointers wrap point */
+
+	snd_pcm_uframes_t silence_start; /* starting pointer to silence area */
+	snd_pcm_uframes_t silence_filled; /* size filled with silence */
+
+	snd_pcm_sync_id_t sync;		/* hardware synchronization ID */
+
+	/* -- mmap -- */
+	volatile snd_pcm_mmap_status_t *status;
+	volatile snd_pcm_mmap_control_t *control;
+	atomic_t mmap_count;
+
+	/* -- locking / scheduling -- */
+	wait_queue_head_t sleep;
+	struct timer_list tick_timer;
+	struct fasync_struct *fasync;
+
+	/* -- private section -- */
+	void *private_data;
+	void (*private_free)(snd_pcm_runtime_t *runtime);
+
+	/* -- hardware description -- */
+	snd_pcm_hardware_t hw;
+	snd_pcm_hw_constraints_t hw_constraints;
+
+	/* -- interrupt callbacks -- */
+	void (*transfer_ack_begin)(snd_pcm_substream_t *substream);
+	void (*transfer_ack_end)(snd_pcm_substream_t *substream);
+
+	/* -- timer -- */
+	unsigned int timer_resolution;	/* timer resolution */
+
+	/* -- DMA -- */           
+	unsigned char *dma_area;	/* DMA area */
+	dma_addr_t dma_addr;		/* physical bus address (not accessible from main CPU) */
+	size_t dma_bytes;		/* size of DMA area */
+
+	struct snd_dma_buffer *dma_buffer_p;	/* allocated buffer */
+
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	snd_pcm_oss_runtime_t oss;
+#endif
+};
+
+typedef struct _snd_pcm_group {		/* keep linked substreams */
+	spinlock_t lock;
+	struct list_head substreams;
+	int count;
+} snd_pcm_group_t;
+
+struct _snd_pcm_substream {
+	snd_pcm_t *pcm;
+	snd_pcm_str_t *pstr;
+	void *private_data;		/* copied from pcm->private_data */
+	int number;
+	char name[32];			/* substream name */
+	int stream;			/* stream (direction) */
+	size_t buffer_bytes_max;	/* limit ring buffer size */
+	struct snd_dma_buffer dma_buffer;
+	unsigned int dma_buf_id;
+	size_t dma_max;
+	/* -- hardware operations -- */
+	unsigned int open_flag: 1;	/* lowlevel device has been opened */
+	snd_pcm_ops_t *ops;
+	/* -- runtime information -- */
+	snd_pcm_runtime_t *runtime;
+        /* -- timer section -- */
+	snd_timer_t *timer;		/* timer */
+	unsigned timer_running: 1;	/* time is running */
+	spinlock_t timer_lock;
+	/* -- next substream -- */
+	snd_pcm_substream_t *next;
+	/* -- linked substreams -- */
+	struct list_head link_list;	/* linked list member */
+	snd_pcm_group_t self_group;	/* fake group for non linked substream (with substream lock inside) */
+	snd_pcm_group_t *group;		/* pointer to current group */
+	/* -- assigned files -- */
+	snd_pcm_file_t *file;
+	struct file *ffile;
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	snd_pcm_oss_substream_t oss;
+#endif
+	snd_info_entry_t *proc_root;
+	snd_info_entry_t *proc_info_entry;
+	snd_info_entry_t *proc_hw_params_entry;
+	snd_info_entry_t *proc_sw_params_entry;
+	snd_info_entry_t *proc_status_entry;
+	snd_info_entry_t *proc_prealloc_entry;
+	/* misc flags */
+	unsigned int no_mmap_ctrl: 1;
+};
+
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+#define SUBSTREAM_BUSY(substream) ((substream)->file != NULL || ((substream)->oss.file != NULL))
+#else
+#define SUBSTREAM_BUSY(substream) ((substream)->file != NULL)
+#endif
+
+
+struct _snd_pcm_str {
+	int stream;				/* stream (direction) */
+	snd_pcm_t *pcm;
+	/* -- substreams -- */
+	unsigned int substream_count;
+	unsigned int substream_opened;
+	snd_pcm_substream_t *substream;
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	snd_pcm_oss_stream_t oss;
+#endif
+	snd_pcm_file_t *files;
+	snd_minor_t *reg;
+	snd_info_entry_t *proc_root;
+	snd_info_entry_t *proc_info_entry;
+#ifdef CONFIG_SND_DEBUG
+	unsigned int xrun_debug;	/* 0 = disabled, 1 = verbose, 2 = stacktrace */
+	snd_info_entry_t *proc_xrun_debug_entry;
+#endif
+};
+
+struct _snd_pcm {
+	snd_card_t *card;
+	unsigned int device;	/* device number */
+	unsigned int info_flags;
+	unsigned short dev_class;
+	unsigned short dev_subclass;
+	char id[64];
+	char name[80];
+	snd_pcm_str_t streams[2];
+	struct semaphore open_mutex;
+	wait_queue_head_t open_wait;
+	void *private_data;
+	void (*private_free) (snd_pcm_t *pcm);
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	snd_pcm_oss_t oss;
+#endif
+};
+
+typedef struct _snd_pcm_notify {
+	int (*n_register) (snd_pcm_t * pcm);
+	int (*n_disconnect) (snd_pcm_t * pcm);
+	int (*n_unregister) (snd_pcm_t * pcm);
+	struct list_head list;
+} snd_pcm_notify_t;
+
+/*
+ *  Registering
+ */
+
+extern snd_pcm_t *snd_pcm_devices[];
+extern snd_minor_t snd_pcm_reg[2];
+
+int snd_pcm_new(snd_card_t * card, char *id, int device,
+		int playback_count, int capture_count,
+		snd_pcm_t **rpcm);
+int snd_pcm_new_stream(snd_pcm_t *pcm, int stream, int substream_count);
+
+int snd_pcm_notify(snd_pcm_notify_t *notify, int nfree);
+
+/*
+ *  Native I/O
+ */
+
+extern rwlock_t snd_pcm_link_rwlock;
+
+int snd_pcm_info(snd_pcm_substream_t * substream, snd_pcm_info_t *info);
+int snd_pcm_info_user(snd_pcm_substream_t * substream, snd_pcm_info_t __user *info);
+int snd_pcm_status(snd_pcm_substream_t * substream, snd_pcm_status_t *status);
+int snd_pcm_prepare(snd_pcm_substream_t *substream);
+int snd_pcm_start(snd_pcm_substream_t *substream);
+int snd_pcm_stop(snd_pcm_substream_t *substream, int status);
+int snd_pcm_drain_done(snd_pcm_substream_t *substream);
+#ifdef CONFIG_PM
+int snd_pcm_suspend(snd_pcm_substream_t *substream);
+int snd_pcm_suspend_all(snd_pcm_t *pcm);
+#endif
+int snd_pcm_kernel_playback_ioctl(snd_pcm_substream_t *substream, unsigned int cmd, void *arg);
+int snd_pcm_kernel_capture_ioctl(snd_pcm_substream_t *substream, unsigned int cmd, void *arg);
+int snd_pcm_kernel_ioctl(snd_pcm_substream_t *substream, unsigned int cmd, void *arg);
+int snd_pcm_open_substream(snd_pcm_t *pcm, int stream, snd_pcm_substream_t **rsubstream);
+void snd_pcm_release_substream(snd_pcm_substream_t *substream);
+void snd_pcm_vma_notify_data(void *client, void *data);
+int snd_pcm_mmap_data(snd_pcm_substream_t *substream, struct file *file, struct vm_area_struct *area);
+
+#if BITS_PER_LONG >= 64
+
+static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
+{
+	*rem = *n % div;
+	*n /= div;
+}
+
+#elif defined(i386)
+
+static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
+{
+	u_int32_t low, high;
+	low = *n & 0xffffffff;
+	high = *n >> 32;
+	if (high) {
+		u_int32_t high1 = high % div;
+		high /= div;
+		asm("divl %2":"=a" (low), "=d" (*rem):"rm" (div), "a" (low), "d" (high1));
+		*n = (u_int64_t)high << 32 | low;
+	} else {
+		*n = low / div;
+		*rem = low % div;
+	}
+}
+#else
+
+static inline void divl(u_int32_t high, u_int32_t low,
+			u_int32_t div,
+			u_int32_t *q, u_int32_t *r)
+{
+	u_int64_t n = (u_int64_t)high << 32 | low;
+	u_int64_t d = (u_int64_t)div << 31;
+	u_int32_t q1 = 0;
+	int c = 32;
+	while (n > 0xffffffffU) {
+		q1 <<= 1;
+		if (n >= d) {
+			n -= d;
+			q1 |= 1;
+		}
+		d >>= 1;
+		c--;
+	}
+	q1 <<= c;
+	if (n) {
+		low = n;
+		*q = q1 | (low / div);
+		*r = low % div;
+	} else {
+		*r = 0;
+		*q = q1;
+	}
+	return;
+}
+
+static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
+{
+	u_int32_t low, high;
+	low = *n & 0xffffffff;
+	high = *n >> 32;
+	if (high) {
+		u_int32_t high1 = high % div;
+		u_int32_t low1 = low;
+		high /= div;
+		divl(high1, low1, div, &low, rem);
+		*n = (u_int64_t)high << 32 | low;
+	} else {
+		*n = low / div;
+		*rem = low % div;
+	}
+}
+#endif
+
+/*
+ *  PCM library
+ */
+
+static inline int snd_pcm_stream_linked(snd_pcm_substream_t *substream)
+{
+	return substream->group != &substream->self_group;
+}
+
+static inline void snd_pcm_stream_lock(snd_pcm_substream_t *substream)
+{
+	read_lock(&snd_pcm_link_rwlock);
+	spin_lock(&substream->self_group.lock);
+}
+
+static inline void snd_pcm_stream_unlock(snd_pcm_substream_t *substream)
+{
+	spin_unlock(&substream->self_group.lock);
+	read_unlock(&snd_pcm_link_rwlock);
+}
+
+static inline void snd_pcm_stream_lock_irq(snd_pcm_substream_t *substream)
+{
+	read_lock_irq(&snd_pcm_link_rwlock);
+	spin_lock(&substream->self_group.lock);
+}
+
+static inline void snd_pcm_stream_unlock_irq(snd_pcm_substream_t *substream)
+{
+	spin_unlock(&substream->self_group.lock);
+	read_unlock_irq(&snd_pcm_link_rwlock);
+}
+
+#define snd_pcm_stream_lock_irqsave(substream, flags) \
+do { \
+	read_lock_irqsave(&snd_pcm_link_rwlock, (flags)); \
+	spin_lock(&substream->self_group.lock); \
+} while (0)
+
+#define snd_pcm_stream_unlock_irqrestore(substream, flags) \
+do { \
+	spin_unlock(&substream->self_group.lock); \
+	read_unlock_irqrestore(&snd_pcm_link_rwlock, (flags)); \
+} while (0)
+
+#define snd_pcm_group_for_each(pos, substream) \
+	list_for_each(pos, &substream->group->substreams)
+
+#define snd_pcm_group_substream_entry(pos) \
+	list_entry(pos, snd_pcm_substream_t, link_list)
+
+static inline int snd_pcm_running(snd_pcm_substream_t *substream)
+{
+	return (substream->runtime->status->state == SNDRV_PCM_STATE_RUNNING ||
+		(substream->runtime->status->state == SNDRV_PCM_STATE_DRAINING &&
+		 substream->stream == SNDRV_PCM_STREAM_PLAYBACK));
+}
+
+static inline ssize_t bytes_to_samples(snd_pcm_runtime_t *runtime, ssize_t size)
+{
+	return size * 8 / runtime->sample_bits;
+}
+
+static inline snd_pcm_sframes_t bytes_to_frames(snd_pcm_runtime_t *runtime, ssize_t size)
+{
+	return size * 8 / runtime->frame_bits;
+}
+
+static inline ssize_t samples_to_bytes(snd_pcm_runtime_t *runtime, ssize_t size)
+{
+	return size * runtime->sample_bits / 8;
+}
+
+static inline ssize_t frames_to_bytes(snd_pcm_runtime_t *runtime, snd_pcm_sframes_t size)
+{
+	return size * runtime->frame_bits / 8;
+}
+
+static inline int frame_aligned(snd_pcm_runtime_t *runtime, ssize_t bytes)
+{
+	return bytes % runtime->byte_align == 0;
+}
+
+static inline size_t snd_pcm_lib_buffer_bytes(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return frames_to_bytes(runtime, runtime->buffer_size);
+}
+
+static inline size_t snd_pcm_lib_period_bytes(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return frames_to_bytes(runtime, runtime->period_size);
+}
+
+/*
+ *  result is: 0 ... (boundary - 1)
+ */
+static inline snd_pcm_uframes_t snd_pcm_playback_avail(snd_pcm_runtime_t *runtime)
+{
+	snd_pcm_sframes_t avail = runtime->status->hw_ptr + runtime->buffer_size - runtime->control->appl_ptr;
+	if (avail < 0)
+		avail += runtime->boundary;
+	else if ((snd_pcm_uframes_t) avail >= runtime->boundary)
+		avail -= runtime->boundary;
+	return avail;
+}
+
+/*
+ *  result is: 0 ... (boundary - 1)
+ */
+static inline snd_pcm_uframes_t snd_pcm_capture_avail(snd_pcm_runtime_t *runtime)
+{
+	snd_pcm_sframes_t avail = runtime->status->hw_ptr - runtime->control->appl_ptr;
+	if (avail < 0)
+		avail += runtime->boundary;
+	return avail;
+}
+
+static inline snd_pcm_sframes_t snd_pcm_playback_hw_avail(snd_pcm_runtime_t *runtime)
+{
+	return runtime->buffer_size - snd_pcm_playback_avail(runtime);
+}
+
+static inline snd_pcm_sframes_t snd_pcm_capture_hw_avail(snd_pcm_runtime_t *runtime)
+{
+	return runtime->buffer_size - snd_pcm_capture_avail(runtime);
+}
+
+/**
+ * snd_pcm_playback_ready - check whether the playback buffer is available
+ * @substream: the pcm substream instance
+ *
+ * Checks whether enough free space is available on the playback buffer.
+ *
+ * Returns non-zero if available, or zero if not.
+ */
+static inline int snd_pcm_playback_ready(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return snd_pcm_playback_avail(runtime) >= runtime->control->avail_min;
+}
+
+/**
+ * snd_pcm_capture_ready - check whether the capture buffer is available
+ * @substream: the pcm substream instance
+ *
+ * Checks whether enough capture data is available on the capture buffer.
+ *
+ * Returns non-zero if available, or zero if not.
+ */
+static inline int snd_pcm_capture_ready(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return snd_pcm_capture_avail(runtime) >= runtime->control->avail_min;
+}
+
+/**
+ * snd_pcm_playback_data - check whether any data exists on the playback buffer
+ * @substream: the pcm substream instance
+ *
+ * Checks whether any data exists on the playback buffer. If stop_threshold
+ * is bigger or equal to boundary, then this function returns always non-zero.
+ *
+ * Returns non-zero if exists, or zero if not.
+ */
+static inline int snd_pcm_playback_data(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	
+	if (runtime->stop_threshold >= runtime->boundary)
+		return 1;
+	return snd_pcm_playback_avail(runtime) < runtime->buffer_size;
+}
+
+/**
+ * snd_pcm_playback_empty - check whether the playback buffer is empty
+ * @substream: the pcm substream instance
+ *
+ * Checks whether the playback buffer is empty.
+ *
+ * Returns non-zero if empty, or zero if not.
+ */
+static inline int snd_pcm_playback_empty(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return snd_pcm_playback_avail(runtime) >= runtime->buffer_size;
+}
+
+/**
+ * snd_pcm_capture_empty - check whether the capture buffer is empty
+ * @substream: the pcm substream instance
+ *
+ * Checks whether the capture buffer is empty.
+ *
+ * Returns non-zero if empty, or zero if not.
+ */
+static inline int snd_pcm_capture_empty(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return snd_pcm_capture_avail(runtime) == 0;
+}
+
+static inline void snd_pcm_trigger_done(snd_pcm_substream_t *substream, 
+					snd_pcm_substream_t *master)
+{
+	substream->runtime->trigger_master = master;
+}
+
+static inline int hw_is_mask(int var)
+{
+	return var >= SNDRV_PCM_HW_PARAM_FIRST_MASK &&
+		var <= SNDRV_PCM_HW_PARAM_LAST_MASK;
+}
+
+static inline int hw_is_interval(int var)
+{
+	return var >= SNDRV_PCM_HW_PARAM_FIRST_INTERVAL &&
+		var <= SNDRV_PCM_HW_PARAM_LAST_INTERVAL;
+}
+
+static inline snd_mask_t *hw_param_mask(snd_pcm_hw_params_t *params,
+				     snd_pcm_hw_param_t var)
+{
+	return &params->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK];
+}
+
+static inline snd_interval_t *hw_param_interval(snd_pcm_hw_params_t *params,
+					     snd_pcm_hw_param_t var)
+{
+	return &params->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL];
+}
+
+static inline const snd_mask_t *hw_param_mask_c(const snd_pcm_hw_params_t *params,
+					     snd_pcm_hw_param_t var)
+{
+	return (const snd_mask_t *)hw_param_mask((snd_pcm_hw_params_t*) params, var);
+}
+
+static inline const snd_interval_t *hw_param_interval_c(const snd_pcm_hw_params_t *params,
+						     snd_pcm_hw_param_t var)
+{
+	return (const snd_interval_t *)hw_param_interval((snd_pcm_hw_params_t*) params, var);
+}
+
+#define params_access(p) snd_mask_min(hw_param_mask((p), SNDRV_PCM_HW_PARAM_ACCESS))
+#define params_format(p) snd_mask_min(hw_param_mask((p), SNDRV_PCM_HW_PARAM_FORMAT))
+#define params_subformat(p) snd_mask_min(hw_param_mask((p), SNDRV_PCM_HW_PARAM_SUBFORMAT))
+#define params_channels(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_CHANNELS)->min
+#define params_rate(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_RATE)->min
+#define params_period_size(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_PERIOD_SIZE)->min
+#define params_period_bytes(p) ((params_period_size(p)*snd_pcm_format_physical_width(params_format(p))*params_channels(p))/8)
+#define params_periods(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_PERIODS)->min
+#define params_buffer_size(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_BUFFER_SIZE)->min
+#define params_buffer_bytes(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_BUFFER_BYTES)->min
+#define params_tick_time(p) hw_param_interval((p), SNDRV_PCM_HW_PARAM_TICK_TIME)->min
+
+
+int snd_interval_refine(snd_interval_t *i, const snd_interval_t *v);
+void snd_interval_mul(const snd_interval_t *a, const snd_interval_t *b, snd_interval_t *c);
+void snd_interval_div(const snd_interval_t *a, const snd_interval_t *b, snd_interval_t *c);
+void snd_interval_muldivk(const snd_interval_t *a, const snd_interval_t *b, 
+			  unsigned int k, snd_interval_t *c);
+void snd_interval_mulkdiv(const snd_interval_t *a, unsigned int k,
+			  const snd_interval_t *b, snd_interval_t *c);
+int snd_interval_list(snd_interval_t *i, unsigned int count, unsigned int *list, unsigned int mask);
+int snd_interval_ratnum(snd_interval_t *i,
+			unsigned int rats_count, ratnum_t *rats,
+			unsigned int *nump, unsigned int *denp);
+
+void _snd_pcm_hw_params_any(snd_pcm_hw_params_t *params);
+void _snd_pcm_hw_param_setempty(snd_pcm_hw_params_t *params, snd_pcm_hw_param_t var);
+int snd_pcm_hw_param_min(snd_pcm_substream_t *substream, 
+			 snd_pcm_hw_params_t *params,
+			 snd_pcm_hw_param_t var,
+			 unsigned int val, int *dir);
+int snd_pcm_hw_param_max(snd_pcm_substream_t *substream, 
+			 snd_pcm_hw_params_t *params,
+			 snd_pcm_hw_param_t var,
+			 unsigned int val, int *dir);
+int snd_pcm_hw_param_setinteger(snd_pcm_substream_t *substream, 
+				snd_pcm_hw_params_t *params,
+				snd_pcm_hw_param_t var);
+int snd_pcm_hw_param_first(snd_pcm_substream_t *substream, 
+			   snd_pcm_hw_params_t *params,
+			   snd_pcm_hw_param_t var, int *dir);
+int snd_pcm_hw_param_last(snd_pcm_substream_t *substream, 
+			  snd_pcm_hw_params_t *params,
+			  snd_pcm_hw_param_t var, int *dir);
+int snd_pcm_hw_param_near(snd_pcm_substream_t *substream, 
+			  snd_pcm_hw_params_t *params,
+			  snd_pcm_hw_param_t var, 
+			  unsigned int val, int *dir);
+int snd_pcm_hw_param_set(snd_pcm_substream_t *pcm,
+			 snd_pcm_hw_params_t *params,
+			 snd_pcm_hw_param_t var,
+			 unsigned int val, int dir);
+int snd_pcm_hw_params_choose(snd_pcm_substream_t *substream, snd_pcm_hw_params_t *params);
+
+int snd_pcm_hw_refine(snd_pcm_substream_t *substream, snd_pcm_hw_params_t *params);
+int snd_pcm_hw_params(snd_pcm_substream_t *substream, snd_pcm_hw_params_t *params);
+
+int snd_pcm_hw_constraints_init(snd_pcm_substream_t *substream);
+int snd_pcm_hw_constraints_complete(snd_pcm_substream_t *substream);
+
+int snd_pcm_hw_constraint_mask(snd_pcm_runtime_t *runtime, snd_pcm_hw_param_t var,
+			       u_int32_t mask);
+int snd_pcm_hw_constraint_mask64(snd_pcm_runtime_t *runtime, snd_pcm_hw_param_t var,
+				 u_int64_t mask);
+int snd_pcm_hw_constraint_minmax(snd_pcm_runtime_t *runtime, snd_pcm_hw_param_t var,
+				 unsigned int min, unsigned int max);
+int snd_pcm_hw_constraint_integer(snd_pcm_runtime_t *runtime, snd_pcm_hw_param_t var);
+int snd_pcm_hw_constraint_list(snd_pcm_runtime_t *runtime, 
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var,
+			       snd_pcm_hw_constraint_list_t *l);
+int snd_pcm_hw_constraint_ratnums(snd_pcm_runtime_t *runtime, 
+				  unsigned int cond,
+				  snd_pcm_hw_param_t var,
+				  snd_pcm_hw_constraint_ratnums_t *r);
+int snd_pcm_hw_constraint_ratdens(snd_pcm_runtime_t *runtime, 
+				  unsigned int cond,
+				  snd_pcm_hw_param_t var,
+				  snd_pcm_hw_constraint_ratdens_t *r);
+int snd_pcm_hw_constraint_msbits(snd_pcm_runtime_t *runtime, 
+				 unsigned int cond,
+				 unsigned int width,
+				 unsigned int msbits);
+int snd_pcm_hw_constraint_step(snd_pcm_runtime_t *runtime,
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var,
+			       unsigned long step);
+int snd_pcm_hw_constraint_pow2(snd_pcm_runtime_t *runtime,
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var);
+int snd_pcm_hw_rule_add(snd_pcm_runtime_t *runtime,
+			unsigned int cond,
+			int var,
+			snd_pcm_hw_rule_func_t func, void *private,
+			int dep, ...);
+
+int snd_pcm_format_signed(snd_pcm_format_t format);
+int snd_pcm_format_unsigned(snd_pcm_format_t format);
+int snd_pcm_format_linear(snd_pcm_format_t format);
+int snd_pcm_format_little_endian(snd_pcm_format_t format);
+int snd_pcm_format_big_endian(snd_pcm_format_t format);
+int snd_pcm_format_width(snd_pcm_format_t format);			/* in bits */
+int snd_pcm_format_physical_width(snd_pcm_format_t format);		/* in bits */
+const unsigned char *snd_pcm_format_silence_64(snd_pcm_format_t format);
+int snd_pcm_format_set_silence(snd_pcm_format_t format, void *buf, unsigned int frames);
+snd_pcm_format_t snd_pcm_build_linear_format(int width, int unsignd, int big_endian);
+const char *snd_pcm_format_name(snd_pcm_format_t format);
+
+void snd_pcm_set_ops(snd_pcm_t * pcm, int direction, snd_pcm_ops_t *ops);
+void snd_pcm_set_sync(snd_pcm_substream_t * substream);
+int snd_pcm_lib_interleave_len(snd_pcm_substream_t *substream);
+int snd_pcm_lib_ioctl(snd_pcm_substream_t *substream,
+		      unsigned int cmd, void *arg);                      
+int snd_pcm_update_hw_ptr(snd_pcm_substream_t *substream);
+int snd_pcm_playback_xrun_check(snd_pcm_substream_t *substream);
+int snd_pcm_capture_xrun_check(snd_pcm_substream_t *substream);
+int snd_pcm_playback_xrun_asap(snd_pcm_substream_t *substream);
+int snd_pcm_capture_xrun_asap(snd_pcm_substream_t *substream);
+void snd_pcm_playback_silence(snd_pcm_substream_t *substream, snd_pcm_uframes_t new_hw_ptr);
+void snd_pcm_tick_prepare(snd_pcm_substream_t *substream);
+void snd_pcm_tick_set(snd_pcm_substream_t *substream, unsigned long ticks);
+void snd_pcm_tick_elapsed(snd_pcm_substream_t *substream);
+void snd_pcm_period_elapsed(snd_pcm_substream_t *substream);
+snd_pcm_sframes_t snd_pcm_lib_write(snd_pcm_substream_t *substream,
+				    const void __user *buf,
+				    snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_read(snd_pcm_substream_t *substream,
+				   void __user *buf, snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_writev(snd_pcm_substream_t *substream,
+				     void __user **bufs, snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_readv(snd_pcm_substream_t *substream,
+				    void __user **bufs, snd_pcm_uframes_t frames);
+
+int snd_pcm_limit_hw_rates(snd_pcm_runtime_t *runtime);
+
+static inline void snd_pcm_set_runtime_buffer(snd_pcm_substream_t *substream,
+					      struct snd_dma_buffer *bufp)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	if (bufp) {
+		runtime->dma_buffer_p = bufp;
+		runtime->dma_area = bufp->area;
+		runtime->dma_addr = bufp->addr;
+		runtime->dma_bytes = bufp->bytes;
+	} else {
+		runtime->dma_buffer_p = NULL;
+		runtime->dma_area = NULL;
+		runtime->dma_addr = 0;
+		runtime->dma_bytes = 0;
+	}
+}
+
+/*
+ *  Timer interface
+ */
+
+void snd_pcm_timer_resolution_change(snd_pcm_substream_t *substream);
+void snd_pcm_timer_init(snd_pcm_substream_t * substream);
+void snd_pcm_timer_done(snd_pcm_substream_t * substream);
+
+/*
+ *  Memory
+ */
+
+int snd_pcm_lib_preallocate_free(snd_pcm_substream_t *substream);
+int snd_pcm_lib_preallocate_free_for_all(snd_pcm_t *pcm);
+int snd_pcm_lib_preallocate_pages(snd_pcm_substream_t *substream,
+				  int type, struct device *data,
+				  size_t size, size_t max);
+int snd_pcm_lib_preallocate_pages_for_all(snd_pcm_t *pcm,
+					  int type, void *data,
+					  size_t size, size_t max);
+int snd_pcm_lib_malloc_pages(snd_pcm_substream_t *substream, size_t size);
+int snd_pcm_lib_free_pages(snd_pcm_substream_t *substream);
+
+#define snd_pcm_substream_sgbuf(substream) ((substream)->runtime->dma_buffer_p->private_data)
+#define snd_pcm_sgbuf_pages(size) snd_sgbuf_aligned_pages(size)
+#define snd_pcm_sgbuf_get_addr(sgbuf,ofs) snd_sgbuf_get_addr(sgbuf,ofs)
+struct page *snd_pcm_sgbuf_ops_page(snd_pcm_substream_t *substream, unsigned long offset);
+
+/* handle mmap counter - PCM mmap callback should handle this counter properly */
+static inline void snd_pcm_mmap_data_open(struct vm_area_struct *area)
+{
+	snd_pcm_substream_t *substream = (snd_pcm_substream_t *)area->vm_private_data;
+	atomic_inc(&substream->runtime->mmap_count);
+}
+
+static inline void snd_pcm_mmap_data_close(struct vm_area_struct *area)
+{
+	snd_pcm_substream_t *substream = (snd_pcm_substream_t *)area->vm_private_data;
+	atomic_dec(&substream->runtime->mmap_count);
+}
+
+/* mmap for io-memory area */
+#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_ALPHA)
+#define SNDRV_PCM_INFO_MMAP_IOMEM	SNDRV_PCM_INFO_MMAP
+int snd_pcm_lib_mmap_iomem(snd_pcm_substream_t *substream, struct vm_area_struct *area);
+#else
+#define SNDRV_PCM_INFO_MMAP_IOMEM	0
+#define snd_pcm_lib_mmap_iomem	NULL
+#endif
+
+static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max)
+{
+	*max = dma < 4 ? 64 * 1024 : 128 * 1024;
+}
+
+/*
+ *  Misc
+ */
+
+#define SNDRV_PCM_DEFAULT_CON_SPDIF	(IEC958_AES0_CON_EMPHASIS_NONE|\
+					 (IEC958_AES1_CON_ORIGINAL<<8)|\
+					 (IEC958_AES1_CON_PCM_CODER<<8)|\
+					 (IEC958_AES3_CON_FS_48000<<24))
+
+#endif /* __SOUND_PCM_H */
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
new file mode 100644
index 000000000000..518728536bc6
--- /dev/null
+++ b/include/sound/pcm_oss.h
@@ -0,0 +1,87 @@
+#ifndef __SOUND_PCM_OSS_H
+#define __SOUND_PCM_OSS_H
+
+/*
+ *  Digital Audio (PCM) - OSS compatibility abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+typedef struct _snd_pcm_plugin snd_pcm_plugin_t;
+typedef struct _snd_pcm_oss_setup snd_pcm_oss_setup_t;
+
+struct _snd_pcm_oss_setup {
+	char *task_name;
+	unsigned int disable:1,
+		     direct:1,
+		     block:1,
+		     nonblock:1,
+		     partialfrag:1,
+		     nosilence:1;
+	unsigned int periods;
+	unsigned int period_size;
+	snd_pcm_oss_setup_t *next;
+};
+
+typedef struct _snd_pcm_oss_runtime {
+	unsigned params: 1,			/* format/parameter change */
+		 prepare: 1,			/* need to prepare the operation */
+		 trigger: 1,			/* trigger flag */
+		 sync_trigger: 1;		/* sync trigger flag */
+	int rate;				/* requested rate */
+	int format;				/* requested OSS format */
+	unsigned int channels;			/* requested channels */
+	unsigned int fragshift;
+	unsigned int maxfrags;
+	unsigned int subdivision;		/* requested subdivision */
+	size_t period_bytes;			/* requested period size */
+	size_t period_frames;			/* period frames for poll */
+	size_t period_ptr;			/* actual write pointer to period */
+	unsigned int periods;
+	size_t buffer_bytes;			/* requested buffer size */
+	size_t bytes;				/* total # bytes processed */
+	size_t mmap_bytes;
+	char *buffer;				/* vmallocated period */
+	size_t buffer_used;			/* used length from period buffer */
+	snd_pcm_plugin_t *plugin_first;
+	snd_pcm_plugin_t *plugin_last;
+	unsigned int prev_hw_ptr_interrupt;
+} snd_pcm_oss_runtime_t;
+
+typedef struct _snd_pcm_oss_file {
+	snd_pcm_substream_t *streams[2];
+} snd_pcm_oss_file_t;
+
+typedef struct _snd_pcm_oss_substream {
+	unsigned oss: 1;			/* oss mode */
+	snd_pcm_oss_setup_t *setup;		/* active setup */
+	snd_pcm_oss_file_t *file;
+} snd_pcm_oss_substream_t;
+
+typedef struct _snd_pcm_oss_stream {
+	snd_pcm_oss_setup_t *setup_list;	/* setup list */
+        struct semaphore setup_mutex;
+	snd_info_entry_t *proc_entry;
+} snd_pcm_oss_stream_t;
+
+typedef struct _snd_pcm_oss {
+	int reg;
+	unsigned int reg_mask;
+} snd_pcm_oss_t;
+
+#endif /* __SOUND_PCM_OSS_H */
diff --git a/include/sound/pcm_params.h b/include/sound/pcm_params.h
new file mode 100644
index 000000000000..60b0e92e26f3
--- /dev/null
+++ b/include/sound/pcm_params.h
@@ -0,0 +1,366 @@
+#ifndef __SOUND_PCM_PARAMS_H
+#define __SOUND_PCM_PARAMS_H
+
+/*
+ *  PCM params helpers
+ *  Copyright (c) by Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+extern int snd_pcm_hw_param_mask(snd_pcm_substream_t *pcm, snd_pcm_hw_params_t *params,
+				 snd_pcm_hw_param_t var, const snd_mask_t *val);
+extern unsigned int snd_pcm_hw_param_value_min(const snd_pcm_hw_params_t *params,
+					       snd_pcm_hw_param_t var, int *dir);
+extern unsigned int snd_pcm_hw_param_value_max(const snd_pcm_hw_params_t *params,
+					       snd_pcm_hw_param_t var, int *dir);
+extern int _snd_pcm_hw_param_min(snd_pcm_hw_params_t *params,
+				 snd_pcm_hw_param_t var, unsigned int val, int dir);
+extern int _snd_pcm_hw_param_setinteger(snd_pcm_hw_params_t *params,
+					snd_pcm_hw_param_t var);
+extern int _snd_pcm_hw_param_set(snd_pcm_hw_params_t *params,
+				 snd_pcm_hw_param_t var, unsigned int val, int dir);
+
+/* To share the same code we have  alsa-lib */
+#define INLINE static inline
+#define assert(a) (void)(a)
+
+#define SNDRV_MASK_BITS	64	/* we use so far 64bits only */
+#define SNDRV_MASK_SIZE	(SNDRV_MASK_BITS / 32)
+#define MASK_OFS(i)	((i) >> 5)
+#define MASK_BIT(i)	(1U << ((i) & 31))
+
+INLINE unsigned int ld2(u_int32_t v)
+{
+        unsigned r = 0;
+
+        if (v >= 0x10000) {
+                v >>= 16;
+                r += 16;
+        }
+        if (v >= 0x100) {
+                v >>= 8;
+                r += 8;
+        }
+        if (v >= 0x10) {
+                v >>= 4;
+                r += 4;
+        }
+        if (v >= 4) {
+                v >>= 2;
+                r += 2;
+        }
+        if (v >= 2)
+                r++;
+        return r;
+}
+
+INLINE size_t snd_mask_sizeof(void)
+{
+	return sizeof(snd_mask_t);
+}
+
+INLINE void snd_mask_none(snd_mask_t *mask)
+{
+	memset(mask, 0, sizeof(*mask));
+}
+
+INLINE void snd_mask_any(snd_mask_t *mask)
+{
+	memset(mask, 0xff, SNDRV_MASK_SIZE * sizeof(u_int32_t));
+}
+
+INLINE int snd_mask_empty(const snd_mask_t *mask)
+{
+	int i;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++)
+		if (mask->bits[i])
+			return 0;
+	return 1;
+}
+
+INLINE unsigned int snd_mask_min(const snd_mask_t *mask)
+{
+	int i;
+	assert(!snd_mask_empty(mask));
+	for (i = 0; i < SNDRV_MASK_SIZE; i++) {
+		if (mask->bits[i])
+			return ffs(mask->bits[i]) - 1 + (i << 5);
+	}
+	return 0;
+}
+
+INLINE unsigned int snd_mask_max(const snd_mask_t *mask)
+{
+	int i;
+	assert(!snd_mask_empty(mask));
+	for (i = SNDRV_MASK_SIZE - 1; i >= 0; i--) {
+		if (mask->bits[i])
+			return ld2(mask->bits[i]) + (i << 5);
+	}
+	return 0;
+}
+
+INLINE void snd_mask_set(snd_mask_t *mask, unsigned int val)
+{
+	assert(val <= SNDRV_MASK_BITS);
+	mask->bits[MASK_OFS(val)] |= MASK_BIT(val);
+}
+
+INLINE void snd_mask_reset(snd_mask_t *mask, unsigned int val)
+{
+	assert(val <= SNDRV_MASK_BITS);
+	mask->bits[MASK_OFS(val)] &= ~MASK_BIT(val);
+}
+
+INLINE void snd_mask_set_range(snd_mask_t *mask, unsigned int from, unsigned int to)
+{
+	unsigned int i;
+	assert(to <= SNDRV_MASK_BITS && from <= to);
+	for (i = from; i <= to; i++)
+		mask->bits[MASK_OFS(i)] |= MASK_BIT(i);
+}
+
+INLINE void snd_mask_reset_range(snd_mask_t *mask, unsigned int from, unsigned int to)
+{
+	unsigned int i;
+	assert(to <= SNDRV_MASK_BITS && from <= to);
+	for (i = from; i <= to; i++)
+		mask->bits[MASK_OFS(i)] &= ~MASK_BIT(i);
+}
+
+INLINE void snd_mask_leave(snd_mask_t *mask, unsigned int val)
+{
+	unsigned int v;
+	assert(val <= SNDRV_MASK_BITS);
+	v = mask->bits[MASK_OFS(val)] & MASK_BIT(val);
+	snd_mask_none(mask);
+	mask->bits[MASK_OFS(val)] = v;
+}
+
+INLINE void snd_mask_intersect(snd_mask_t *mask, const snd_mask_t *v)
+{
+	int i;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++)
+		mask->bits[i] &= v->bits[i];
+}
+
+INLINE int snd_mask_eq(const snd_mask_t *mask, const snd_mask_t *v)
+{
+	return ! memcmp(mask, v, SNDRV_MASK_SIZE * sizeof(u_int32_t));
+}
+
+INLINE void snd_mask_copy(snd_mask_t *mask, const snd_mask_t *v)
+{
+	*mask = *v;
+}
+
+INLINE int snd_mask_test(const snd_mask_t *mask, unsigned int val)
+{
+	assert(val <= SNDRV_MASK_BITS);
+	return mask->bits[MASK_OFS(val)] & MASK_BIT(val);
+}
+
+INLINE int snd_mask_single(const snd_mask_t *mask)
+{
+	int i, c = 0;
+	assert(!snd_mask_empty(mask));
+	for (i = 0; i < SNDRV_MASK_SIZE; i++) {
+		if (! mask->bits[i])
+			continue;
+		if (mask->bits[i] & (mask->bits[i] - 1))
+			return 0;
+		if (c)
+			return 0;
+		c++;
+	}
+	return 1;
+}
+
+INLINE int snd_mask_refine(snd_mask_t *mask, const snd_mask_t *v)
+{
+	snd_mask_t old;
+	assert(!snd_mask_empty(mask));
+	snd_mask_copy(&old, mask);
+	snd_mask_intersect(mask, v);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return !snd_mask_eq(mask, &old);
+}
+
+INLINE int snd_mask_refine_first(snd_mask_t *mask)
+{
+	assert(!snd_mask_empty(mask));
+	if (snd_mask_single(mask))
+		return 0;
+	snd_mask_leave(mask, snd_mask_min(mask));
+	return 1;
+}
+
+INLINE int snd_mask_refine_last(snd_mask_t *mask)
+{
+	assert(!snd_mask_empty(mask));
+	if (snd_mask_single(mask))
+		return 0;
+	snd_mask_leave(mask, snd_mask_max(mask));
+	return 1;
+}
+
+INLINE int snd_mask_refine_min(snd_mask_t *mask, unsigned int val)
+{
+	assert(!snd_mask_empty(mask));
+	if (snd_mask_min(mask) >= val)
+		return 0;
+	snd_mask_reset_range(mask, 0, val - 1);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return 1;
+}
+
+INLINE int snd_mask_refine_max(snd_mask_t *mask, unsigned int val)
+{
+	assert(!snd_mask_empty(mask));
+	if (snd_mask_max(mask) <= val)
+		return 0;
+	snd_mask_reset_range(mask, val + 1, SNDRV_MASK_BITS);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return 1;
+}
+
+INLINE int snd_mask_refine_set(snd_mask_t *mask, unsigned int val)
+{
+	int changed;
+	assert(!snd_mask_empty(mask));
+	changed = !snd_mask_single(mask);
+	snd_mask_leave(mask, val);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return changed;
+}
+
+INLINE int snd_mask_value(const snd_mask_t *mask)
+{
+	assert(!snd_mask_empty(mask));
+	return snd_mask_min(mask);
+}
+
+INLINE void snd_interval_any(snd_interval_t *i)
+{
+	i->min = 0;
+	i->openmin = 0;
+	i->max = UINT_MAX;
+	i->openmax = 0;
+	i->integer = 0;
+	i->empty = 0;
+}
+
+INLINE void snd_interval_none(snd_interval_t *i)
+{
+	i->empty = 1;
+}
+
+INLINE int snd_interval_checkempty(const snd_interval_t *i)
+{
+	return (i->min > i->max ||
+		(i->min == i->max && (i->openmin || i->openmax)));
+}
+
+INLINE int snd_interval_empty(const snd_interval_t *i)
+{
+	return i->empty;
+}
+
+INLINE int snd_interval_single(const snd_interval_t *i)
+{
+	assert(!snd_interval_empty(i));
+	return (i->min == i->max || 
+		(i->min + 1 == i->max && i->openmax));
+}
+
+INLINE int snd_interval_value(const snd_interval_t *i)
+{
+	assert(snd_interval_single(i));
+	return i->min;
+}
+
+INLINE int snd_interval_min(const snd_interval_t *i)
+{
+	assert(!snd_interval_empty(i));
+	return i->min;
+}
+
+INLINE int snd_interval_max(const snd_interval_t *i)
+{
+	unsigned int v;
+	assert(!snd_interval_empty(i));
+	v = i->max;
+	if (i->openmax)
+		v--;
+	return v;
+}
+
+INLINE int snd_interval_test(const snd_interval_t *i, unsigned int val)
+{
+	return !((i->min > val || (i->min == val && i->openmin) ||
+		  i->max < val || (i->max == val && i->openmax)));
+}
+
+INLINE void snd_interval_copy(snd_interval_t *d, const snd_interval_t *s)
+{
+	*d = *s;
+}
+
+INLINE int snd_interval_setinteger(snd_interval_t *i)
+{
+	if (i->integer)
+		return 0;
+	if (i->openmin && i->openmax && i->min == i->max)
+		return -EINVAL;
+	i->integer = 1;
+	return 1;
+}
+
+INLINE int snd_interval_eq(const snd_interval_t *i1, const snd_interval_t *i2)
+{
+	if (i1->empty)
+		return i2->empty;
+	if (i2->empty)
+		return i1->empty;
+	return i1->min == i2->min && i1->openmin == i2->openmin &&
+		i1->max == i2->max && i1->openmax == i2->openmax;
+}
+
+static inline unsigned int add(unsigned int a, unsigned int b)
+{
+	if (a >= UINT_MAX - b)
+		return UINT_MAX;
+	return a + b;
+}
+
+static inline unsigned int sub(unsigned int a, unsigned int b)
+{
+	if (a > b)
+		return a - b;
+	return 0;
+}
+
+#undef INLINE
+#undef assert
+
+#endif /* __SOUND_PCM_PARAMS_H */
+
diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h
new file mode 100644
index 000000000000..3f9db510dee3
--- /dev/null
+++ b/include/sound/rawmidi.h
@@ -0,0 +1,180 @@
+#ifndef __SOUND_RAWMIDI_H
+#define __SOUND_RAWMIDI_H
+
+/*
+ *  Abstract layer for MIDI v1.0 stream
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/semaphore.h>
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#include "seq_device.h"
+#endif
+
+/*
+ *  Raw MIDI interface
+ */
+
+typedef enum sndrv_rawmidi_stream snd_rawmidi_stream_t;
+typedef struct sndrv_rawmidi_info snd_rawmidi_info_t;
+typedef struct sndrv_rawmidi_params snd_rawmidi_params_t;
+typedef struct sndrv_rawmidi_status snd_rawmidi_status_t;
+
+#define SNDRV_RAWMIDI_DEVICES		8
+
+#define SNDRV_RAWMIDI_LFLG_OUTPUT	(1<<0)
+#define SNDRV_RAWMIDI_LFLG_INPUT	(1<<1)
+#define SNDRV_RAWMIDI_LFLG_OPEN		(3<<0)
+#define SNDRV_RAWMIDI_LFLG_APPEND	(1<<2)
+#define	SNDRV_RAWMIDI_LFLG_NOOPENLOCK	(1<<3)
+
+typedef struct _snd_rawmidi_runtime snd_rawmidi_runtime_t;
+typedef struct _snd_rawmidi_substream snd_rawmidi_substream_t;
+typedef struct _snd_rawmidi_str snd_rawmidi_str_t;
+
+typedef struct _snd_rawmidi_ops {
+	int (*open) (snd_rawmidi_substream_t * substream);
+	int (*close) (snd_rawmidi_substream_t * substream);
+	void (*trigger) (snd_rawmidi_substream_t * substream, int up);
+	void (*drain) (snd_rawmidi_substream_t * substream);
+} snd_rawmidi_ops_t;
+
+typedef struct _snd_rawmidi_global_ops {
+	int (*dev_register) (snd_rawmidi_t * rmidi);
+	int (*dev_unregister) (snd_rawmidi_t * rmidi);
+} snd_rawmidi_global_ops_t;
+
+struct _snd_rawmidi_runtime {
+	unsigned int drain: 1,	/* drain stage */
+		     oss: 1;	/* OSS compatible mode */
+	/* midi stream buffer */
+	unsigned char *buffer;	/* buffer for MIDI data */
+	size_t buffer_size;	/* size of buffer */
+	size_t appl_ptr;	/* application pointer */
+	size_t hw_ptr;		/* hardware pointer */
+	size_t avail_min;	/* min avail for wakeup */
+	size_t avail;		/* max used buffer for wakeup */
+	size_t xruns;		/* over/underruns counter */
+	/* misc */
+	spinlock_t lock;
+	wait_queue_head_t sleep;
+	/* event handler (new bytes, input only) */
+	void (*event)(snd_rawmidi_substream_t *substream);
+	/* defers calls to event [input] or ops->trigger [output] */
+	struct tasklet_struct tasklet;
+	/* private data */
+	void *private_data;
+	void (*private_free)(snd_rawmidi_substream_t *substream);
+};
+
+struct _snd_rawmidi_substream {
+	struct list_head list;		/* list of all substream for given stream */
+	int stream;			/* direction */
+	int number;			/* substream number */
+	unsigned int opened: 1,		/* open flag */
+		     append: 1,		/* append flag (merge more streams) */
+		     active_sensing: 1; /* send active sensing when close */
+	int use_count;			/* use counter (for output) */
+	size_t bytes;
+	snd_rawmidi_t *rmidi;
+	snd_rawmidi_str_t *pstr;
+	char name[32];
+	snd_rawmidi_runtime_t *runtime;
+	/* hardware layer */
+	snd_rawmidi_ops_t *ops;
+};
+
+typedef struct _snd_rawmidi_file {
+	snd_rawmidi_t *rmidi;
+	snd_rawmidi_substream_t *input;
+	snd_rawmidi_substream_t *output;
+} snd_rawmidi_file_t;
+
+struct _snd_rawmidi_str {
+	unsigned int substream_count;
+	unsigned int substream_opened;
+	struct list_head substreams;
+};
+
+struct _snd_rawmidi {
+	snd_card_t *card;
+
+	unsigned int device;		/* device number */
+	unsigned int info_flags;	/* SNDRV_RAWMIDI_INFO_XXXX */
+	char id[64];
+	char name[80];
+
+#ifdef CONFIG_SND_OSSEMUL
+	int ossreg;
+#endif
+
+	snd_rawmidi_global_ops_t *ops;
+
+	snd_rawmidi_str_t streams[2];
+
+	void *private_data;
+	void (*private_free) (snd_rawmidi_t *rmidi);
+
+	struct semaphore open_mutex;
+	wait_queue_head_t open_wait;
+
+	snd_info_entry_t *dev;
+	snd_info_entry_t *proc_entry;
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+	snd_seq_device_t *seq_dev;
+#endif
+};
+
+/* main rawmidi functions */
+
+int snd_rawmidi_new(snd_card_t * card, char *id, int device,
+		    int output_count, int input_count,
+		    snd_rawmidi_t ** rmidi);
+void snd_rawmidi_set_ops(snd_rawmidi_t * rmidi, int stream, snd_rawmidi_ops_t * ops);
+
+/* callbacks */
+
+void snd_rawmidi_receive_reset(snd_rawmidi_substream_t * substream);
+int snd_rawmidi_receive(snd_rawmidi_substream_t * substream, const unsigned char *buffer, int count);
+void snd_rawmidi_transmit_reset(snd_rawmidi_substream_t * substream);
+int snd_rawmidi_transmit_empty(snd_rawmidi_substream_t * substream);
+int snd_rawmidi_transmit_peek(snd_rawmidi_substream_t * substream, unsigned char *buffer, int count);
+int snd_rawmidi_transmit_ack(snd_rawmidi_substream_t * substream, int count);
+int snd_rawmidi_transmit(snd_rawmidi_substream_t * substream, unsigned char *buffer, int count);
+
+/* main midi functions */
+
+int snd_rawmidi_info_select(snd_card_t *card, snd_rawmidi_info_t *info);
+int snd_rawmidi_kernel_open(int cardnum, int device, int subdevice, int mode, snd_rawmidi_file_t * rfile);
+int snd_rawmidi_kernel_release(snd_rawmidi_file_t * rfile);
+int snd_rawmidi_output_params(snd_rawmidi_substream_t * substream, snd_rawmidi_params_t * params);
+int snd_rawmidi_input_params(snd_rawmidi_substream_t * substream, snd_rawmidi_params_t * params);
+int snd_rawmidi_drop_output(snd_rawmidi_substream_t * substream);
+int snd_rawmidi_drain_output(snd_rawmidi_substream_t * substream);
+int snd_rawmidi_drain_input(snd_rawmidi_substream_t * substream);
+long snd_rawmidi_kernel_read(snd_rawmidi_substream_t * substream, unsigned char *buf, long count);
+long snd_rawmidi_kernel_write(snd_rawmidi_substream_t * substream, const unsigned char *buf, long count);
+
+#endif /* __SOUND_RAWMIDI_H */
diff --git a/include/sound/sb.h b/include/sound/sb.h
new file mode 100644
index 000000000000..7960452445e6
--- /dev/null
+++ b/include/sound/sb.h
@@ -0,0 +1,360 @@
+#ifndef __SOUND_SB_H
+#define __SOUND_SB_H
+
+/*
+ *  Header file for SoundBlaster cards
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+enum sb_hw_type {
+	SB_HW_AUTO,
+	SB_HW_10,
+	SB_HW_20,
+	SB_HW_201,
+	SB_HW_PRO,
+	SB_HW_16,
+	SB_HW_16CSP,		/* SB16 with CSP chip */
+	SB_HW_ALS100,		/* Avance Logic ALS100 chip */
+	SB_HW_ALS4000,		/* Avance Logic ALS4000 chip */
+	SB_HW_DT019X,		/* Diamond Tech. DT-019X / Avance Logic ALS-007 */
+};
+
+#define SB_OPEN_PCM			0x01
+#define SB_OPEN_MIDI_INPUT		0x02
+#define SB_OPEN_MIDI_OUTPUT		0x04
+#define SB_OPEN_MIDI_INPUT_TRIGGER	0x08
+#define SB_OPEN_MIDI_OUTPUT_TRIGGER	0x10
+
+#define SB_MODE_HALT		0x00
+#define SB_MODE_PLAYBACK_8	0x01
+#define SB_MODE_PLAYBACK_16	0x02
+#define SB_MODE_PLAYBACK	(SB_MODE_PLAYBACK_8 | SB_MODE_PLAYBACK_16)
+#define SB_MODE_CAPTURE_8	0x04
+#define SB_MODE_CAPTURE_16	0x08
+#define SB_MODE_CAPTURE		(SB_MODE_CAPTURE_8 | SB_MODE_CAPTURE_16)
+
+#define SB_RATE_LOCK_PLAYBACK	0x10
+#define SB_RATE_LOCK_CAPTURE	0x20
+#define SB_RATE_LOCK		(SB_RATE_LOCK_PLAYBACK | SB_RATE_LOCK_CAPTURE)
+
+#define SB_MPU_INPUT		1
+
+struct _snd_sb {
+	unsigned long port;		/* base port of DSP chip */
+	struct resource *res_port;
+	unsigned long mpu_port;		/* MPU port for SB DSP 4.0+ */
+	int irq;			/* IRQ number of DSP chip */
+	int dma8;			/* 8-bit DMA */
+	int dma16;			/* 16-bit DMA */
+	unsigned short version;		/* version of DSP chip */
+	enum sb_hw_type hardware;	/* see to SB_HW_XXXX */
+
+	unsigned long alt_port;		/* alternate port (ALS4000) */
+	struct pci_dev *pci;		/* ALS4000 */
+
+	unsigned int open;		/* see to SB_OPEN_XXXX for sb8 */
+					/* also SNDRV_SB_CSP_MODE_XXX for sb16_csp */
+	unsigned int mode;		/* current mode of stream */
+	unsigned int force_mode16;	/* force 16-bit mode of streams */
+	unsigned int locked_rate;	/* sb16 duplex */
+	unsigned int playback_format;
+	unsigned int capture_format;
+	struct timer_list midi_timer;
+	unsigned int p_dma_size;
+	unsigned int p_period_size;
+	unsigned int c_dma_size;
+	unsigned int c_period_size;
+
+	spinlock_t mixer_lock;
+
+	char name[32];
+
+	void *csp; /* used only when CONFIG_SND_SB16_CSP is set */
+
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	snd_pcm_substream_t *playback_substream;
+	snd_pcm_substream_t *capture_substream;
+
+	snd_rawmidi_t *rmidi;
+	snd_rawmidi_substream_t *midi_substream_input;
+	snd_rawmidi_substream_t *midi_substream_output;
+	irqreturn_t (*rmidi_callback)(int irq, void *dev_id, struct pt_regs *regs);
+
+	spinlock_t reg_lock;
+	spinlock_t open_lock;
+	spinlock_t midi_input_lock;
+
+	snd_info_entry_t *proc_entry;
+};
+
+typedef struct _snd_sb sb_t;
+
+/* I/O ports */
+
+#define SBP(chip, x)		((chip)->port + s_b_SB_##x)
+#define SBP1(port, x)		((port) + s_b_SB_##x)
+
+#define s_b_SB_RESET		0x6
+#define s_b_SB_READ		0xa
+#define s_b_SB_WRITE		0xc
+#define s_b_SB_COMMAND		0xc
+#define s_b_SB_STATUS		0xc
+#define s_b_SB_DATA_AVAIL	0xe
+#define s_b_SB_DATA_AVAIL_16 	0xf
+#define s_b_SB_MIXER_ADDR	0x4
+#define s_b_SB_MIXER_DATA	0x5
+#define s_b_SB_OPL3_LEFT	0x0
+#define s_b_SB_OPL3_RIGHT	0x2
+#define s_b_SB_OPL3_BOTH	0x8
+
+#define SB_DSP_OUTPUT		0x14
+#define SB_DSP_INPUT		0x24
+#define SB_DSP_BLOCK_SIZE	0x48
+#define SB_DSP_HI_OUTPUT	0x91
+#define SB_DSP_HI_INPUT		0x99
+#define SB_DSP_LO_OUTPUT_AUTO	0x1c
+#define SB_DSP_LO_INPUT_AUTO	0x2c
+#define SB_DSP_HI_OUTPUT_AUTO	0x90
+#define SB_DSP_HI_INPUT_AUTO	0x98
+#define SB_DSP_IMMED_INT	0xf2
+#define SB_DSP_GET_VERSION	0xe1
+#define SB_DSP_SPEAKER_ON	0xd1
+#define SB_DSP_SPEAKER_OFF	0xd3
+#define SB_DSP_DMA8_OFF		0xd0
+#define SB_DSP_DMA8_ON		0xd4
+#define SB_DSP_DMA8_EXIT	0xda
+#define SB_DSP_DMA16_OFF	0xd5
+#define SB_DSP_DMA16_ON		0xd6
+#define SB_DSP_DMA16_EXIT	0xd9
+#define SB_DSP_SAMPLE_RATE	0x40
+#define SB_DSP_SAMPLE_RATE_OUT	0x41
+#define SB_DSP_SAMPLE_RATE_IN	0x42
+#define SB_DSP_MONO_8BIT	0xa0
+#define SB_DSP_MONO_16BIT	0xa4
+#define SB_DSP_STEREO_8BIT	0xa8
+#define SB_DSP_STEREO_16BIT	0xac
+
+#define SB_DSP_MIDI_INPUT_IRQ	0x31
+#define SB_DSP_MIDI_UART_IRQ	0x35
+#define SB_DSP_MIDI_OUTPUT	0x38
+
+#define SB_DSP4_OUT8_AI		0xc6
+#define SB_DSP4_IN8_AI		0xce
+#define SB_DSP4_OUT16_AI	0xb6
+#define SB_DSP4_IN16_AI		0xbe
+#define SB_DSP4_MODE_UNS_MONO	0x00
+#define SB_DSP4_MODE_SIGN_MONO	0x10
+#define SB_DSP4_MODE_UNS_STEREO	0x20
+#define SB_DSP4_MODE_SIGN_STEREO 0x30
+
+#define SB_DSP4_OUTPUT		0x3c
+#define SB_DSP4_INPUT_LEFT	0x3d
+#define SB_DSP4_INPUT_RIGHT	0x3e
+
+/* registers for SB 2.0 mixer */
+#define SB_DSP20_MASTER_DEV	0x02
+#define SB_DSP20_PCM_DEV	0x0A
+#define SB_DSP20_CD_DEV		0x08
+#define SB_DSP20_FM_DEV		0x06
+
+/* registers for SB PRO mixer */
+#define SB_DSP_MASTER_DEV	0x22
+#define SB_DSP_PCM_DEV		0x04
+#define SB_DSP_LINE_DEV		0x2e
+#define SB_DSP_CD_DEV		0x28
+#define SB_DSP_FM_DEV		0x26
+#define SB_DSP_MIC_DEV		0x0a
+#define SB_DSP_CAPTURE_SOURCE	0x0c
+#define SB_DSP_CAPTURE_FILT	0x0c
+#define SB_DSP_PLAYBACK_FILT	0x0e
+#define SB_DSP_STEREO_SW	0x0e
+
+#define SB_DSP_MIXS_MIC0	0x00	/* same as MIC */
+#define SB_DSP_MIXS_CD		0x01
+#define SB_DSP_MIXS_MIC		0x02
+#define SB_DSP_MIXS_LINE	0x03
+
+/* registers (only for left channel) for SB 16 mixer */
+#define SB_DSP4_MASTER_DEV	0x30
+#define SB_DSP4_BASS_DEV	0x46
+#define SB_DSP4_TREBLE_DEV	0x44
+#define SB_DSP4_SYNTH_DEV	0x34
+#define SB_DSP4_PCM_DEV		0x32
+#define SB_DSP4_SPEAKER_DEV	0x3b
+#define SB_DSP4_LINE_DEV	0x38
+#define SB_DSP4_MIC_DEV		0x3a
+#define SB_DSP4_OUTPUT_SW	0x3c
+#define SB_DSP4_CD_DEV		0x36
+#define SB_DSP4_IGAIN_DEV	0x3f
+#define SB_DSP4_OGAIN_DEV	0x41
+#define SB_DSP4_MIC_AGC		0x43
+
+/* additional registers for SB 16 mixer */
+#define SB_DSP4_IRQSETUP	0x80
+#define SB_DSP4_DMASETUP	0x81
+#define SB_DSP4_IRQSTATUS	0x82
+#define SB_DSP4_MPUSETUP	0x84
+
+#define SB_DSP4_3DSE		0x90
+
+/* Registers for DT-019x / ALS-007 mixer */
+#define SB_DT019X_MASTER_DEV	0x62
+#define SB_DT019X_PCM_DEV	0x64
+#define SB_DT019X_SYNTH_DEV	0x66
+#define SB_DT019X_CD_DEV	0x68
+#define SB_DT019X_MIC_DEV	0x6a
+#define SB_DT019X_SPKR_DEV	0x6a
+#define SB_DT019X_LINE_DEV	0x6e
+#define SB_DT019X_OUTPUT_SW2	0x4c
+#define SB_DT019X_CAPTURE_SW	0x6c
+
+#define SB_DT019X_CAP_CD	0x02
+#define SB_DT019X_CAP_MIC	0x04
+#define SB_DT019X_CAP_LINE	0x06
+#define SB_DT019X_CAP_SYNTH	0x07
+#define SB_DT019X_CAP_MAIN	0x07
+
+#define SB_ALS4000_MONO_IO_CTRL	0x4b
+#define SB_ALS4000_MIC_IN_GAIN	0x4d
+#define SB_ALS4000_FMDAC	0x4f
+#define SB_ALS4000_3D_SND_FX	0x50
+#define SB_ALS4000_3D_TIME_DELAY	0x51
+#define SB_ALS4000_3D_AUTO_MUTE	0x52
+#define SB_ALS4000_QSOUND	0xdb
+
+/* IRQ setting bitmap */
+#define SB_IRQSETUP_IRQ9	0x01
+#define SB_IRQSETUP_IRQ5	0x02
+#define SB_IRQSETUP_IRQ7	0x04
+#define SB_IRQSETUP_IRQ10	0x08
+
+/* IRQ types */
+#define SB_IRQTYPE_8BIT		0x01
+#define SB_IRQTYPE_16BIT	0x02
+#define SB_IRQTYPE_MPUIN	0x04
+
+/* DMA setting bitmap */
+#define SB_DMASETUP_DMA0	0x01
+#define SB_DMASETUP_DMA1	0x02
+#define SB_DMASETUP_DMA3	0x08
+#define SB_DMASETUP_DMA5	0x20
+#define SB_DMASETUP_DMA6	0x40
+#define SB_DMASETUP_DMA7	0x80
+
+/*
+ *
+ */
+
+static inline void snd_sb_ack_8bit(sb_t *chip)
+{
+	inb(SBP(chip, DATA_AVAIL));
+}
+
+static inline void snd_sb_ack_16bit(sb_t *chip)
+{
+	inb(SBP(chip, DATA_AVAIL_16));
+}
+
+/* sb_common.c */
+int snd_sbdsp_command(sb_t *chip, unsigned char val);
+int snd_sbdsp_get_byte(sb_t *chip);
+int snd_sbdsp_reset(sb_t *chip);
+int snd_sbdsp_create(snd_card_t *card,
+		     unsigned long port,
+		     int irq,
+		     irqreturn_t (*irq_handler)(int, void *, struct pt_regs *),
+		     int dma8, int dma16,
+		     unsigned short hardware,
+		     sb_t **r_chip);
+/* sb_mixer.c */
+void snd_sbmixer_write(sb_t *chip, unsigned char reg, unsigned char data);
+unsigned char snd_sbmixer_read(sb_t *chip, unsigned char reg);
+int snd_sbmixer_new(sb_t *chip);
+
+/* sb8_init.c */
+int snd_sb8dsp_pcm(sb_t *chip, int device, snd_pcm_t ** rpcm);
+/* sb8.c */
+irqreturn_t snd_sb8dsp_interrupt(sb_t *chip);
+int snd_sb8_playback_open(snd_pcm_substream_t *substream);
+int snd_sb8_capture_open(snd_pcm_substream_t *substream);
+int snd_sb8_playback_close(snd_pcm_substream_t *substream);
+int snd_sb8_capture_close(snd_pcm_substream_t *substream);
+/* midi8.c */
+irqreturn_t snd_sb8dsp_midi_interrupt(sb_t *chip);
+int snd_sb8dsp_midi(sb_t *chip, int device, snd_rawmidi_t ** rrawmidi);
+
+/* sb16_init.c */
+int snd_sb16dsp_pcm(sb_t *chip, int device, snd_pcm_t ** rpcm);
+const snd_pcm_ops_t *snd_sb16dsp_get_pcm_ops(int direction);
+int snd_sb16dsp_configure(sb_t *chip);
+/* sb16.c */
+irqreturn_t snd_sb16dsp_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/* exported mixer stuffs */
+enum {
+	SB_MIX_SINGLE,
+	SB_MIX_DOUBLE,
+	SB_MIX_INPUT_SW,
+	SB_MIX_CAPTURE_PRO,
+	SB_MIX_CAPTURE_DT019X
+};
+
+#define SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) \
+  ((left_reg) | ((right_reg) << 8) | ((left_shift) << 16) | ((right_shift) << 19) | ((mask) << 24))
+#define SB_MIXVAL_SINGLE(reg, shift, mask) \
+  ((reg) | ((shift) << 16) | ((mask) << 24))
+#define SB_MIXVAL_INPUT_SW(reg1, reg2, left_shift, right_shift) \
+  ((reg1) | ((reg2) << 8) | ((left_shift) << 16) | ((right_shift) << 24))
+
+int snd_sbmixer_add_ctl(sb_t *chip, const char *name, int index, int type, unsigned long value);
+
+/* for ease of use */
+struct sbmix_elem {
+	const char *name;
+	int type;
+	unsigned long private_value;
+};
+
+#define SB_SINGLE(xname, reg, shift, mask) \
+{ .name = xname, \
+  .type = SB_MIX_SINGLE, \
+  .private_value = SB_MIXVAL_SINGLE(reg, shift, mask) }
+
+#define SB_DOUBLE(xname, left_reg, right_reg, left_shift, right_shift, mask) \
+{ .name = xname, \
+  .type = SB_MIX_DOUBLE, \
+  .private_value = SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) }
+
+#define SB16_INPUT_SW(xname, reg1, reg2, left_shift, right_shift) \
+{ .name = xname, \
+  .type = SB_MIX_INPUT_SW, \
+  .private_value = SB_MIXVAL_INPUT_SW(reg1, reg2, left_shift, right_shift) }
+
+static inline int snd_sbmixer_add_ctl_elem(sb_t *chip, const struct sbmix_elem *c)
+{
+	return snd_sbmixer_add_ctl(chip, c->name, 0, c->type, c->private_value);
+}
+
+#endif /* __SOUND_SB_H */
diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h
new file mode 100644
index 000000000000..eb8368b56b16
--- /dev/null
+++ b/include/sound/sb16_csp.h
@@ -0,0 +1,167 @@
+#ifndef __SOUND_SB16_CSP_H
+#define __SOUND_SB16_CSP_H
+
+/*
+ *  Copyright (c) 1999 by Uros Bizjak <uros@kss-loka.si>
+ *                        Takashi Iwai <tiwai@suse.de>
+ *
+ *  SB16ASP/AWE32 CSP control
+ *
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* CSP modes */
+#define SNDRV_SB_CSP_MODE_NONE		0x00
+#define SNDRV_SB_CSP_MODE_DSP_READ	0x01	/* Record from DSP */
+#define SNDRV_SB_CSP_MODE_DSP_WRITE	0x02	/* Play to DSP */
+#define SNDRV_SB_CSP_MODE_QSOUND		0x04	/* QSound */
+
+/* CSP load flags */
+#define SNDRV_SB_CSP_LOAD_FROMUSER	0x01
+#define SNDRV_SB_CSP_LOAD_INITBLOCK	0x02
+
+/* CSP sample width */
+#define SNDRV_SB_CSP_SAMPLE_8BIT		0x01
+#define SNDRV_SB_CSP_SAMPLE_16BIT		0x02
+
+/* CSP channels */
+#define SNDRV_SB_CSP_MONO			0x01
+#define SNDRV_SB_CSP_STEREO		0x02
+
+/* CSP rates */
+#define SNDRV_SB_CSP_RATE_8000		0x01
+#define SNDRV_SB_CSP_RATE_11025		0x02
+#define SNDRV_SB_CSP_RATE_22050		0x04
+#define SNDRV_SB_CSP_RATE_44100		0x08
+#define SNDRV_SB_CSP_RATE_ALL		0x0f
+
+/* CSP running state */
+#define SNDRV_SB_CSP_ST_IDLE		0x00
+#define SNDRV_SB_CSP_ST_LOADED		0x01
+#define SNDRV_SB_CSP_ST_RUNNING		0x02
+#define SNDRV_SB_CSP_ST_PAUSED		0x04
+#define SNDRV_SB_CSP_ST_AUTO		0x08
+#define SNDRV_SB_CSP_ST_QSOUND		0x10
+
+/* maximum QSound value (180 degrees right) */
+#define SNDRV_SB_CSP_QSOUND_MAX_RIGHT	0x20
+
+/* maximum microcode RIFF file size */
+#define SNDRV_SB_CSP_MAX_MICROCODE_FILE_SIZE	0x3000
+
+/* microcode header */
+typedef struct snd_sb_csp_mc_header {
+	char codec_name[16];		/* id name of codec */
+	unsigned short func_req;	/* requested function */
+} snd_sb_csp_mc_header_t;
+
+/* microcode to be loaded */
+typedef struct snd_sb_csp_microcode {
+	snd_sb_csp_mc_header_t info;
+	unsigned char data[SNDRV_SB_CSP_MAX_MICROCODE_FILE_SIZE];
+} snd_sb_csp_microcode_t;
+
+/* start CSP with sample_width in mono/stereo */
+typedef struct snd_sb_csp_start {
+	int sample_width;	/* sample width, look above */
+	int channels;		/* channels, look above */
+} snd_sb_csp_start_t;
+
+/* CSP information */
+typedef struct snd_sb_csp_info {
+	char codec_name[16];		/* id name of codec */
+	unsigned short func_nr;		/* function number */
+	unsigned int acc_format;	/* accepted PCM formats */
+	unsigned short acc_channels;	/* accepted channels */
+	unsigned short acc_width;	/* accepted sample width */
+	unsigned short acc_rates;	/* accepted sample rates */
+	unsigned short csp_mode;	/* CSP mode, see above */
+	unsigned short run_channels;	/* current channels  */
+	unsigned short run_width;	/* current sample width */
+	unsigned short version;		/* version id: 0x10 - 0x1f */
+	unsigned short state;		/* state bits */
+} snd_sb_csp_info_t;
+
+/* HWDEP controls */
+/* get CSP information */
+#define SNDRV_SB_CSP_IOCTL_INFO		_IOR('H', 0x10, snd_sb_csp_info_t)
+/* load microcode to CSP */
+#define SNDRV_SB_CSP_IOCTL_LOAD_CODE	_IOW('H', 0x11, snd_sb_csp_microcode_t)
+/* unload microcode from CSP */
+#define SNDRV_SB_CSP_IOCTL_UNLOAD_CODE	_IO('H', 0x12)
+/* start CSP */
+#define SNDRV_SB_CSP_IOCTL_START		_IOW('H', 0x13, snd_sb_csp_start_t)
+/* stop CSP */
+#define SNDRV_SB_CSP_IOCTL_STOP		_IO('H', 0x14)
+/* pause CSP and DMA transfer */
+#define SNDRV_SB_CSP_IOCTL_PAUSE		_IO('H', 0x15)
+/* restart CSP and DMA transfer */
+#define SNDRV_SB_CSP_IOCTL_RESTART	_IO('H', 0x16)
+
+#ifdef __KERNEL__
+#include "sb.h"
+#include "hwdep.h"
+
+typedef struct snd_sb_csp snd_sb_csp_t;
+
+/*
+ * CSP operators
+ */
+typedef struct {
+	int (*csp_use) (snd_sb_csp_t * p);
+	int (*csp_unuse) (snd_sb_csp_t * p);
+	int (*csp_autoload) (snd_sb_csp_t * p, int pcm_sfmt, int play_rec_mode);
+	int (*csp_start) (snd_sb_csp_t * p, int sample_width, int channels);
+	int (*csp_stop) (snd_sb_csp_t * p);
+	int (*csp_qsound_transfer) (snd_sb_csp_t * p);
+} snd_sb_csp_ops_t;
+
+/*
+ * CSP private data
+ */
+struct snd_sb_csp {
+	sb_t *chip;		/* SB16 DSP */
+	int used;		/* usage flag - exclusive */
+	char codec_name[16];	/* name of codec */
+	unsigned short func_nr;	/* function number */
+	unsigned int acc_format;	/* accepted PCM formats */
+	int acc_channels;	/* accepted channels */
+	int acc_width;		/* accepted sample width */
+	int acc_rates;		/* accepted sample rates */
+	int mode;		/* MODE */
+	int run_channels;	/* current CSP channels */
+	int run_width;		/* current sample width */
+	int version;		/* CSP version (0x10 - 0x1f) */
+	int running;		/* running state */
+
+	snd_sb_csp_ops_t ops;	/* operators */
+
+	spinlock_t q_lock;	/* locking */
+	int q_enabled;		/* enabled flag */
+	int qpos_left;		/* left position */
+	int qpos_right;		/* right position */
+	int qpos_changed;	/* position changed flag */
+
+	snd_kcontrol_t *qsound_switch;
+	snd_kcontrol_t *qsound_space;
+
+	struct semaphore access_mutex;	/* locking */
+};
+
+int snd_sb_csp_new(sb_t *chip, int device, snd_hwdep_t ** rhwdep);
+#endif
+
+#endif /* __SOUND_SB16_CSP */
diff --git a/include/sound/seq_device.h b/include/sound/seq_device.h
new file mode 100644
index 000000000000..204ca540c28e
--- /dev/null
+++ b/include/sound/seq_device.h
@@ -0,0 +1,88 @@
+#ifndef __SOUND_SEQ_DEVICE_H
+#define __SOUND_SEQ_DEVICE_H
+
+/*
+ *  ALSA sequencer device management
+ *  Copyright (c) 1999 by Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+typedef struct snd_seq_device snd_seq_device_t;
+typedef struct snd_seq_dev_ops snd_seq_dev_ops_t;
+
+/*
+ * registered device information
+ */
+
+#define ID_LEN	32
+
+/* status flag */
+#define SNDRV_SEQ_DEVICE_FREE		0
+#define SNDRV_SEQ_DEVICE_REGISTERED	1
+
+struct snd_seq_device {
+	/* device info */
+	snd_card_t *card;	/* sound card */
+	int device;		/* device number */
+	char id[ID_LEN];	/* driver id */
+	char name[80];		/* device name */
+	int argsize;		/* size of the argument */
+	void *driver_data;	/* private data for driver */
+	int status;		/* flag - read only */
+	void *private_data;	/* private data for the caller */
+	void (*private_free)(snd_seq_device_t *device);
+	struct list_head list;	/* link to next device */
+};
+
+
+/* driver operators
+ * init_device:
+ *	Initialize the device with given parameters.
+ *	Typically,
+ *		1. call snd_hwdep_new
+ *		2. allocate private data and initialize it
+ *		3. call snd_hwdep_register
+ *		4. store the instance to dev->driver_data pointer.
+ *		
+ * free_device:
+ *	Release the private data.
+ *	Typically, call snd_device_free(dev->card, dev->driver_data)
+ */
+struct snd_seq_dev_ops {
+	int (*init_device)(snd_seq_device_t *dev);
+	int (*free_device)(snd_seq_device_t *dev);
+};
+
+/*
+ * prototypes
+ */
+void snd_seq_device_load_drivers(void);
+int snd_seq_device_new(snd_card_t *card, int device, char *id, int argsize, snd_seq_device_t **result);
+int snd_seq_device_register_driver(char *id, snd_seq_dev_ops_t *entry, int argsize);
+int snd_seq_device_unregister_driver(char *id);
+
+#define SNDRV_SEQ_DEVICE_ARGPTR(dev) (void *)((char *)(dev) + sizeof(snd_seq_device_t))
+
+
+/*
+ * id strings for generic devices
+ */
+#define SNDRV_SEQ_DEV_ID_MIDISYNTH	"seq-midi"
+#define SNDRV_SEQ_DEV_ID_OPL3		"opl3-synth"
+
+
+#endif /* __SOUND_SEQ_DEVICE_H */
diff --git a/include/sound/seq_instr.h b/include/sound/seq_instr.h
new file mode 100644
index 000000000000..1a654df4aa97
--- /dev/null
+++ b/include/sound/seq_instr.h
@@ -0,0 +1,112 @@
+#ifndef __SOUND_SEQ_INSTR_H
+#define __SOUND_SEQ_INSTR_H
+
+/*
+ *  Main kernel header file for the ALSA sequencer
+ *  Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#include "seq_kernel.h"
+
+/* Instrument cluster */
+typedef struct _snd_seq_kcluster {
+	snd_seq_instr_cluster_t cluster;
+	char name[32];
+	int priority;
+	struct _snd_seq_kcluster *next;
+} snd_seq_kcluster_t;
+
+/* return pointer to private data */
+#define KINSTR_DATA(kinstr)	(void *)(((char *)kinstr) + sizeof(snd_seq_kinstr_t))
+
+typedef struct snd_seq_kinstr_ops snd_seq_kinstr_ops_t;
+
+/* Instrument structure */
+typedef struct _snd_seq_kinstr {
+	snd_seq_instr_t instr;
+	char name[32];
+	int type;			/* instrument type */
+	int use;			/* use count */
+	int busy;			/* not useable */
+	int add_len;			/* additional length */
+	snd_seq_kinstr_ops_t *ops;	/* operations */
+	struct _snd_seq_kinstr *next;
+} snd_seq_kinstr_t;
+
+#define SNDRV_SEQ_INSTR_HASH_SIZE		32
+
+/* Instrument flags */
+#define SNDRV_SEQ_INSTR_FLG_DIRECT	(1<<0)	/* accept only direct events */
+
+/* List of all instruments */
+typedef struct {
+	snd_seq_kinstr_t *hash[SNDRV_SEQ_INSTR_HASH_SIZE];
+	int count;			/* count of all instruments */
+	
+	snd_seq_kcluster_t *chash[SNDRV_SEQ_INSTR_HASH_SIZE];
+	int ccount;			/* count of all clusters */
+
+	int owner;			/* current owner of the instrument list */
+	unsigned int flags;
+
+	spinlock_t lock;
+	spinlock_t ops_lock;
+	struct semaphore ops_mutex;
+	unsigned long ops_flags;
+} snd_seq_kinstr_list_t;
+
+#define SNDRV_SEQ_INSTR_NOTIFY_REMOVE	0
+#define SNDRV_SEQ_INSTR_NOTIFY_CHANGE	1
+
+struct snd_seq_kinstr_ops {
+	void *private_data;
+	long add_len;			/* additional length */
+	char *instr_type;
+	int (*info)(void *private_data, char *info_data, long len);
+	int (*put)(void *private_data, snd_seq_kinstr_t *kinstr,
+		   char __user *instr_data, long len, int atomic, int cmd);
+	int (*get)(void *private_data, snd_seq_kinstr_t *kinstr,
+		   char __user *instr_data, long len, int atomic, int cmd);
+	int (*get_size)(void *private_data, snd_seq_kinstr_t *kinstr, long *size);
+	int (*remove)(void *private_data, snd_seq_kinstr_t *kinstr, int atomic);
+	void (*notify)(void *private_data, snd_seq_kinstr_t *kinstr, int what);
+	struct snd_seq_kinstr_ops *next;
+};
+
+
+/* instrument operations */
+snd_seq_kinstr_list_t *snd_seq_instr_list_new(void);
+void snd_seq_instr_list_free(snd_seq_kinstr_list_t **list);
+int snd_seq_instr_list_free_cond(snd_seq_kinstr_list_t *list,
+				 snd_seq_instr_header_t *ifree,
+				 int client,
+				 int atomic);
+snd_seq_kinstr_t *snd_seq_instr_find(snd_seq_kinstr_list_t *list,
+				     snd_seq_instr_t *instr,
+				     int exact,
+				     int follow_alias);
+void snd_seq_instr_free_use(snd_seq_kinstr_list_t *list,
+			    snd_seq_kinstr_t *instr);
+int snd_seq_instr_event(snd_seq_kinstr_ops_t *ops,
+			snd_seq_kinstr_list_t *list,
+			snd_seq_event_t *ev,
+			int client,
+			int atomic,
+			int hop);
+
+#endif /* __SOUND_SEQ_INSTR_H */
diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h
new file mode 100644
index 000000000000..4beca1952c76
--- /dev/null
+++ b/include/sound/seq_kernel.h
@@ -0,0 +1,191 @@
+#ifndef __SOUND_SEQ_KERNEL_H
+#define __SOUND_SEQ_KERNEL_H
+
+/*
+ *  Main kernel header file for the ALSA sequencer
+ *  Copyright (c) 1998 by Frank van de Pol <fvdpol@coil.demon.nl>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#include <linux/time.h>
+#include "asequencer.h"
+
+typedef sndrv_seq_tick_time_t snd_seq_tick_time_t;
+typedef sndrv_seq_position_t snd_seq_position_t;
+typedef sndrv_seq_frequency_t snd_seq_frequency_t;
+typedef sndrv_seq_instr_cluster_t snd_seq_instr_cluster_t;
+typedef enum sndrv_seq_client_type snd_seq_client_type_t;
+typedef enum sndrv_seq_stop_mode snd_seq_stop_mode_t;
+typedef struct sndrv_seq_port_info snd_seq_port_info_t;
+typedef struct sndrv_seq_port_subscribe snd_seq_port_subscribe_t;
+typedef struct sndrv_seq_event snd_seq_event_t;
+typedef struct sndrv_seq_addr snd_seq_addr_t;
+typedef struct sndrv_seq_ev_volume snd_seq_ev_volume_t;
+typedef struct sndrv_seq_ev_loop snd_seq_ev_loop_t;
+typedef struct sndrv_seq_remove_events snd_seq_remove_events_t;
+typedef struct sndrv_seq_query_subs snd_seq_query_subs_t;
+typedef struct sndrv_seq_real_time snd_seq_real_time_t;
+typedef struct sndrv_seq_system_info snd_seq_system_info_t;
+typedef struct sndrv_seq_client_info snd_seq_client_info_t;
+typedef struct sndrv_seq_queue_info snd_seq_queue_info_t;
+typedef struct sndrv_seq_queue_status snd_seq_queue_status_t;
+typedef struct sndrv_seq_queue_tempo snd_seq_queue_tempo_t;
+typedef struct sndrv_seq_queue_owner snd_seq_queue_owner_t;
+typedef struct sndrv_seq_queue_timer snd_seq_queue_timer_t;
+typedef struct sndrv_seq_queue_client snd_seq_queue_client_t;
+typedef struct sndrv_seq_client_pool snd_seq_client_pool_t;
+typedef struct sndrv_seq_instr snd_seq_instr_t;
+typedef struct sndrv_seq_instr_data snd_seq_instr_data_t;
+typedef struct sndrv_seq_instr_header snd_seq_instr_header_t;
+typedef union sndrv_seq_timestamp snd_seq_timestamp_t;
+
+#define snd_seq_event_bounce_ext_data	sndrv_seq_event_bounce_ext_data 
+#define snd_seq_ev_is_result_type	sndrv_seq_ev_is_result_type     
+#define snd_seq_ev_is_channel_type	sndrv_seq_ev_is_channel_type    
+#define snd_seq_ev_is_note_type		sndrv_seq_ev_is_note_type       
+#define snd_seq_ev_is_control_type	sndrv_seq_ev_is_control_type    
+#define snd_seq_ev_is_queue_type	sndrv_seq_ev_is_queue_type      
+#define snd_seq_ev_is_message_type	sndrv_seq_ev_is_message_type    
+#define snd_seq_ev_is_sample_type	sndrv_seq_ev_is_sample_type     
+#define snd_seq_ev_is_user_type		sndrv_seq_ev_is_user_type       
+#define snd_seq_ev_is_fixed_type	sndrv_seq_ev_is_fixed_type      
+#define snd_seq_ev_is_instr_type	sndrv_seq_ev_is_instr_type      
+#define snd_seq_ev_is_variable_type	sndrv_seq_ev_is_variable_type   
+#define snd_seq_ev_is_reserved		sndrv_seq_ev_is_reserved        
+#define snd_seq_ev_is_direct		sndrv_seq_ev_is_direct          
+#define snd_seq_ev_is_prior		sndrv_seq_ev_is_prior           
+#define snd_seq_ev_length_type		sndrv_seq_ev_length_type        
+#define snd_seq_ev_is_fixed		sndrv_seq_ev_is_fixed           
+#define snd_seq_ev_is_variable		sndrv_seq_ev_is_variable        
+#define snd_seq_ev_is_varusr		sndrv_seq_ev_is_varusr          
+#define snd_seq_ev_timestamp_type	sndrv_seq_ev_timestamp_type     
+#define snd_seq_ev_is_tick		sndrv_seq_ev_is_tick            
+#define snd_seq_ev_is_real		sndrv_seq_ev_is_real            
+#define snd_seq_ev_timemode_type	sndrv_seq_ev_timemode_type      
+#define snd_seq_ev_is_abstime		sndrv_seq_ev_is_abstime         
+#define snd_seq_ev_is_reltime		sndrv_seq_ev_is_reltime         
+#define snd_seq_queue_sync_port		sndrv_seq_queue_sync_port       
+#define snd_seq_queue_owner		sndrv_seq_queue_owner           
+
+/* maximum number of events dequeued per schedule interval */
+#define SNDRV_SEQ_MAX_DEQUEUE		50
+
+/* maximum number of queues */
+#define SNDRV_SEQ_MAX_QUEUES		8
+
+/* max number of concurrent clients */
+#define SNDRV_SEQ_MAX_CLIENTS 		192
+
+/* max number of concurrent ports */
+#define SNDRV_SEQ_MAX_PORTS 		254
+
+/* max number of events in memory pool */
+#define SNDRV_SEQ_MAX_EVENTS		2000
+
+/* default number of events in memory chunk */
+#define SNDRV_SEQ_DEFAULT_CHUNK_EVENTS	64
+
+/* default number of events in memory pool */
+#define SNDRV_SEQ_DEFAULT_EVENTS	500
+
+/* max number of events in memory pool for one client (outqueue) */
+#define SNDRV_SEQ_MAX_CLIENT_EVENTS	2000
+
+/* default number of events in memory pool for one client (outqueue) */
+#define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS	200
+
+/* max delivery path length */
+#define SNDRV_SEQ_MAX_HOPS		10
+
+/* max size of event size */
+#define SNDRV_SEQ_MAX_EVENT_LEN		0x3fffffff
+
+/* typedefs */
+struct _snd_seq_user_client;
+struct _snd_seq_kernel_client;
+struct _snd_seq_client;
+struct _snd_seq_queue;
+
+typedef struct _snd_seq_user_client user_client_t;
+typedef struct _snd_seq_kernel_client kernel_client_t;
+typedef struct _snd_seq_client client_t;
+typedef struct _snd_seq_queue queue_t;
+
+/* call-backs for kernel client */
+
+typedef struct {
+	void *private_data;
+	unsigned allow_input: 1,
+		 allow_output: 1;
+	/*...*/
+} snd_seq_client_callback_t;
+
+/* call-backs for kernel port */
+typedef int (snd_seq_kernel_port_open_t)(void *private_data, snd_seq_port_subscribe_t *info);
+typedef int (snd_seq_kernel_port_close_t)(void *private_data, snd_seq_port_subscribe_t *info);
+typedef int (snd_seq_kernel_port_input_t)(snd_seq_event_t *ev, int direct, void *private_data, int atomic, int hop);
+typedef void (snd_seq_kernel_port_private_free_t)(void *private_data);
+
+typedef struct {
+	struct module *owner;
+	void *private_data;
+	snd_seq_kernel_port_open_t *subscribe;
+	snd_seq_kernel_port_close_t *unsubscribe;
+	snd_seq_kernel_port_open_t *use;
+	snd_seq_kernel_port_close_t *unuse;
+	snd_seq_kernel_port_input_t *event_input;
+	snd_seq_kernel_port_private_free_t *private_free;
+	unsigned int callback_all;	/* call subscribe callbacks at each connection/disconnection */
+	/*...*/
+} snd_seq_port_callback_t;
+
+/* interface for kernel client */
+extern int snd_seq_create_kernel_client(snd_card_t *card, int client_index, snd_seq_client_callback_t *callback);
+extern int snd_seq_delete_kernel_client(int client);
+extern int snd_seq_kernel_client_enqueue(int client, snd_seq_event_t *ev, int atomic, int hop);
+extern int snd_seq_kernel_client_dispatch(int client, snd_seq_event_t *ev, int atomic, int hop);
+extern int snd_seq_kernel_client_ctl(int client, unsigned int cmd, void *arg);
+
+#define SNDRV_SEQ_EXT_MASK	0xc0000000
+#define SNDRV_SEQ_EXT_USRPTR	0x80000000
+#define SNDRV_SEQ_EXT_CHAINED	0x40000000
+
+typedef int (*snd_seq_dump_func_t)(void *ptr, void *buf, int count);
+int snd_seq_expand_var_event(const snd_seq_event_t *event, int count, char *buf, int in_kernel, int size_aligned);
+int snd_seq_dump_var_event(const snd_seq_event_t *event, snd_seq_dump_func_t func, void *private_data);
+
+/* interface for OSS emulation */
+int snd_seq_set_queue_tempo(int client, snd_seq_queue_tempo_t *tempo);
+
+/* port callback routines */
+void snd_port_init_callback(snd_seq_port_callback_t *p);
+snd_seq_port_callback_t *snd_port_alloc_callback(void);
+
+/* port attach/detach */
+int snd_seq_event_port_attach(int client, snd_seq_port_callback_t *pcbp,
+			      int cap, int type, int midi_channels, int midi_voices, char *portname);
+int snd_seq_event_port_detach(int client, int port);
+
+#ifdef CONFIG_KMOD
+void snd_seq_autoload_lock(void);
+void snd_seq_autoload_unlock(void);
+#else
+#define snd_seq_autoload_lock()
+#define snd_seq_autoload_unlock()
+#endif
+
+#endif /* __SOUND_SEQ_KERNEL_H */
diff --git a/include/sound/seq_midi_emul.h b/include/sound/seq_midi_emul.h
new file mode 100644
index 000000000000..e58ca45bc73b
--- /dev/null
+++ b/include/sound/seq_midi_emul.h
@@ -0,0 +1,195 @@
+#ifndef __SOUND_SEQ_MIDI_EMUL_H
+#define __SOUND_SEQ_MIDI_EMUL_H
+
+/*
+ *  Midi channel definition for optional channel management.
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "seq_kernel.h"
+
+/*
+ * This structure is used to keep track of the current state on each
+ * channel.  All drivers for hardware that does not understand midi
+ * directly will probably need to use this structure.
+ */
+typedef struct snd_midi_channel {
+	void *private;		/* A back pointer to driver data */
+	int  number;		/* The channel number */
+	int  client;		/* The client associated with this channel */
+	int  port;		/* The port associated with this channel */
+
+	unsigned char midi_mode;	/* GM, GS, XG etc */
+	unsigned int 
+		drum_channel:1,		/* Drum channel */
+		param_type:1		/* RPN/NRPN */
+		;
+
+	unsigned char midi_aftertouch;	/* Aftertouch (key pressure) */
+	unsigned char midi_pressure;	/* Channel pressure */
+	unsigned char midi_program;	/* Instrument number */
+	short midi_pitchbend;		/* Pitch bend amount */
+
+	unsigned char control[128];	/* Current value of all controls */
+	unsigned char note[128];	/* Current status for all notes */
+
+	short gm_rpn_pitch_bend_range;	/* Pitch bend range */
+	short gm_rpn_fine_tuning; 	/* Master fine tuning */
+	short gm_rpn_coarse_tuning;	/* Master coarse tuning */
+
+} snd_midi_channel_t;
+
+/*
+ * A structure that represets a set of channels bound to a port.  There
+ * would usually be 16 channels per port.  But fewer could be used for
+ * particular cases.
+ * The channel set consists of information describing the client and
+ * port for this midi synth and an array of snd_midi_channel_t structures.
+ * A driver that had no need for snd_midi_channel_t could still use the
+ * channel set type if it wished with the channel array null.
+ */
+typedef struct snd_midi_channel_set {
+	void *private_data;		/* Driver data */
+	int  client;			/* Client for this port */
+	int  port;			/* The port number */
+
+	int  max_channels;		/* Size of the channels array */
+	snd_midi_channel_t *channels;
+
+	unsigned char midi_mode;	/* MIDI operating mode */
+	unsigned char gs_master_volume;	/* SYSEX master volume: 0-127 */
+	unsigned char gs_chorus_mode;
+	unsigned char gs_reverb_mode;
+
+} snd_midi_channel_set_t;
+
+typedef struct snd_seq_midi_op {
+	void (*note_on)(void *private_data, int note, int vel, snd_midi_channel_t *chan);
+	void (*note_off)(void *private_data,int note, int vel, snd_midi_channel_t *chan); /* release note */
+	void (*key_press)(void *private_data, int note, int vel, snd_midi_channel_t *chan);
+	void (*note_terminate)(void *private_data, int note, snd_midi_channel_t *chan); /* terminate note immediately */
+	void (*control)(void *private_data, int type, snd_midi_channel_t *chan);
+	void (*nrpn)(void *private_data, snd_midi_channel_t *chan, snd_midi_channel_set_t *chset);
+	void (*sysex)(void *private_data, unsigned char *buf, int len, int parsed, snd_midi_channel_set_t *chset);
+} snd_midi_op_t;
+
+/*
+ * These defines are used so that pitchbend, aftertouch etc, can be
+ * distinguished from controller values.
+ */
+/* 0-127 controller values */
+#define MIDI_CTL_PITCHBEND	0x80
+#define MIDI_CTL_AFTERTOUCH	0x81
+#define MIDI_CTL_CHAN_PRESSURE	0x82
+
+/*
+ * These names exist to allow symbolic access to the controls array.
+ * The usage is eg: chan->gm_bank_select.  Another implementation would
+ * be really have these members in the struct, and not the array.
+ */
+#define gm_bank_select		control[0]
+#define gm_modulation		control[1]
+#define gm_breath		control[2]
+#define gm_foot_pedal		control[4]
+#define gm_portamento_time	control[5]
+#define gm_data_entry		control[6]
+#define gm_volume		control[7]
+#define gm_balance		control[8]
+#define gm_pan			control[10]
+#define gm_expression		control[11]
+#define gm_effect_control1	control[12]
+#define gm_effect_control2	control[13]
+#define gm_slider1		control[16]
+#define gm_slider2		control[17]
+#define gm_slider3		control[18]
+#define gm_slider4		control[19]
+
+#define gm_bank_select_lsb	control[32]
+#define gm_modulation_wheel_lsb	control[33]
+#define gm_breath_lsb		control[34]
+#define gm_foot_pedal_lsb	control[36]
+#define gm_portamento_time_lsb	control[37]
+#define gm_data_entry_lsb	control[38]
+#define gm_volume_lsb		control[39]
+#define gm_balance_lsb		control[40]
+#define gm_pan_lsb		control[42]
+#define gm_expression_lsb	control[43]
+#define gm_effect_control1_lsb	control[44]
+#define gm_effect_control2_lsb	control[45]
+
+#define gm_sustain	 	control[MIDI_CTL_SUSTAIN]
+#define gm_hold			gm_sustain
+#define gm_portamento		control[MIDI_CTL_PORTAMENTO]
+#define gm_sostenuto		control[MIDI_CTL_SOSTENUTO]
+
+/*
+ * These macros give the complete value of the controls that consist
+ * of coarse and fine pairs.  Of course the fine controls are seldom used
+ * but there is no harm in being complete.
+ */
+#define SNDRV_GM_BANK_SELECT(cp)		(((cp)->control[0]<<7)|((cp)->control[32]))
+#define SNDRV_GM_MODULATION_WHEEL(cp)	(((cp)->control[1]<<7)|((cp)->control[33]))
+#define SNDRV_GM_BREATH(cp)		(((cp)->control[2]<<7)|((cp)->control[34]))
+#define SNDRV_GM_FOOT_PEDAL(cp)		(((cp)->control[4]<<7)|((cp)->control[36]))
+#define SNDRV_GM_PORTAMENTO_TIME(cp)	(((cp)->control[5]<<7)|((cp)->control[37]))
+#define SNDRV_GM_DATA_ENTRY(cp)		(((cp)->control[6]<<7)|((cp)->control[38]))
+#define SNDRV_GM_VOLUME(cp)		(((cp)->control[7]<<7)|((cp)->control[39]))
+#define SNDRV_GM_BALANCE(cp)		(((cp)->control[8]<<7)|((cp)->control[40]))
+#define SNDRV_GM_PAN(cp)			(((cp)->control[10]<<7)|((cp)->control[42]))
+#define SNDRV_GM_EXPRESSION(cp)		(((cp)->control[11]<<7)|((cp)->control[43]))
+
+
+/* MIDI mode */
+#define SNDRV_MIDI_MODE_NONE	0	/* Generic midi */
+#define SNDRV_MIDI_MODE_GM	1
+#define SNDRV_MIDI_MODE_GS	2
+#define SNDRV_MIDI_MODE_XG	3
+#define SNDRV_MIDI_MODE_MT32	4
+
+/* MIDI note state */
+#define SNDRV_MIDI_NOTE_OFF		0x00
+#define SNDRV_MIDI_NOTE_ON		0x01
+#define SNDRV_MIDI_NOTE_RELEASED		0x02
+#define SNDRV_MIDI_NOTE_SOSTENUTO		0x04
+ 
+#define SNDRV_MIDI_PARAM_TYPE_REGISTERED		0
+#define SNDRV_MIDI_PARAM_TYPE_NONREGISTERED	1
+
+/* SYSEX parse flag */
+enum {
+	SNDRV_MIDI_SYSEX_NOT_PARSED = 0,
+	SNDRV_MIDI_SYSEX_GM_ON,	
+	SNDRV_MIDI_SYSEX_GS_ON,	
+	SNDRV_MIDI_SYSEX_GS_RESET,	
+	SNDRV_MIDI_SYSEX_GS_CHORUS_MODE,
+	SNDRV_MIDI_SYSEX_GS_REVERB_MODE,
+	SNDRV_MIDI_SYSEX_GS_MASTER_VOLUME,
+	SNDRV_MIDI_SYSEX_GS_PROGRAM,
+	SNDRV_MIDI_SYSEX_GS_DRUM_CHANNEL,
+	SNDRV_MIDI_SYSEX_XG_ON,	
+};
+
+/* Prototypes for midi_process.c */
+void snd_midi_process_event(snd_midi_op_t *ops, snd_seq_event_t *ev,
+			    snd_midi_channel_set_t *chanset);
+void snd_midi_channel_set_clear(snd_midi_channel_set_t *chset);
+snd_midi_channel_set_t *snd_midi_channel_alloc_set(int n);
+void snd_midi_channel_free_set(snd_midi_channel_set_t *chset);
+
+#endif /* __SOUND_SEQ_MIDI_EMUL_H */
diff --git a/include/sound/seq_midi_event.h b/include/sound/seq_midi_event.h
new file mode 100644
index 000000000000..4357cac07500
--- /dev/null
+++ b/include/sound/seq_midi_event.h
@@ -0,0 +1,56 @@
+#ifndef __SOUND_SEQ_MIDI_EVENT_H
+#define __SOUND_SEQ_MIDI_EVENT_H
+
+/*
+ *  MIDI byte <-> sequencer event coder
+ *
+ *  Copyright (C) 1998,99 Takashi Iwai <tiwai@suse.de>,
+ *                        Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "asequencer.h"
+
+#define MAX_MIDI_EVENT_BUF	256
+
+typedef struct snd_midi_event_t snd_midi_event_t;
+
+/* midi status */
+struct snd_midi_event_t {
+	int qlen;		/* queue length */
+	int read;		/* chars read */
+	int type;		/* current event type */
+	unsigned char lastcmd;	/* last command (for MIDI state handling) */
+	unsigned char nostat;	/* no state flag */
+	int bufsize;		/* allocated buffer size */
+	unsigned char *buf;	/* input buffer */
+	spinlock_t lock;
+};
+
+int snd_midi_event_new(int bufsize, snd_midi_event_t **rdev);
+int snd_midi_event_resize_buffer(snd_midi_event_t *dev, int bufsize);
+void snd_midi_event_free(snd_midi_event_t *dev);
+void snd_midi_event_init(snd_midi_event_t *dev);
+void snd_midi_event_reset_encode(snd_midi_event_t *dev);
+void snd_midi_event_reset_decode(snd_midi_event_t *dev);
+void snd_midi_event_no_status(snd_midi_event_t *dev, int on);
+/* encode from byte stream - return number of written bytes if success */
+long snd_midi_event_encode(snd_midi_event_t *dev, unsigned char *buf, long count, snd_seq_event_t *ev);
+int snd_midi_event_encode_byte(snd_midi_event_t *dev, int c, snd_seq_event_t *ev);
+/* decode from event to bytes - return number of written bytes if success */
+long snd_midi_event_decode(snd_midi_event_t *dev, unsigned char *buf, long count, snd_seq_event_t *ev);
+
+#endif /* __SOUND_SEQ_MIDI_EVENT_H */
diff --git a/include/sound/seq_oss.h b/include/sound/seq_oss.h
new file mode 100644
index 000000000000..bd7e57322ab6
--- /dev/null
+++ b/include/sound/seq_oss.h
@@ -0,0 +1,102 @@
+#ifndef __SOUND_SEQ_OSS_H
+#define __SOUND_SEQ_OSS_H
+
+/*
+ * OSS compatible sequencer driver
+ *
+ * Copyright (C) 1998,99 Takashi Iwai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "asequencer.h"
+#include "seq_kernel.h"
+
+/*
+ * type definitions
+ */
+typedef struct snd_seq_oss_arg_t snd_seq_oss_arg_t;
+typedef struct snd_seq_oss_callback_t snd_seq_oss_callback_t;
+
+/*
+ * argument structure for synthesizer operations
+ */
+struct snd_seq_oss_arg_t {
+	/* given by OSS sequencer */
+	int app_index;	/* application unique index */
+	int file_mode;	/* file mode - see below */
+	int seq_mode;	/* sequencer mode - see below */
+
+	/* following must be initialized in open callback */
+	snd_seq_addr_t addr;	/* opened port address */
+	void *private_data;	/* private data for lowlevel drivers */
+
+	/* note-on event passing mode: initially given by OSS seq,
+	 * but configurable by drivers - see below
+	 */
+	int event_passing;
+};
+
+
+/*
+ * synthesizer operation callbacks
+ */
+struct snd_seq_oss_callback_t {
+	struct module *owner;
+	int (*open)(snd_seq_oss_arg_t *p, void *closure);
+	int (*close)(snd_seq_oss_arg_t *p);
+	int (*ioctl)(snd_seq_oss_arg_t *p, unsigned int cmd, unsigned long arg);
+	int (*load_patch)(snd_seq_oss_arg_t *p, int format, const char __user *buf, int offs, int count);
+	int (*reset)(snd_seq_oss_arg_t *p);
+	int (*raw_event)(snd_seq_oss_arg_t *p, unsigned char *data);
+};
+
+/* flag: file_mode */
+#define SNDRV_SEQ_OSS_FILE_ACMODE		3
+#define SNDRV_SEQ_OSS_FILE_READ		1
+#define SNDRV_SEQ_OSS_FILE_WRITE		2
+#define SNDRV_SEQ_OSS_FILE_NONBLOCK	4
+
+/* flag: seq_mode */
+#define SNDRV_SEQ_OSS_MODE_SYNTH		0
+#define SNDRV_SEQ_OSS_MODE_MUSIC		1
+
+/* flag: event_passing */
+#define SNDRV_SEQ_OSS_PROCESS_EVENTS	0	/* key == 255 is processed as velocity change */
+#define SNDRV_SEQ_OSS_PASS_EVENTS		1	/* pass all events to callback */
+#define SNDRV_SEQ_OSS_PROCESS_KEYPRESS	2	/* key >= 128 will be processed as key-pressure */
+
+/* default control rate: fixed */
+#define SNDRV_SEQ_OSS_CTRLRATE		100
+
+/* default max queue length: configurable by module option */
+#define SNDRV_SEQ_OSS_MAX_QLEN		1024
+
+
+/*
+ * data pointer to snd_seq_register_device
+ */
+typedef struct snd_seq_oss_reg {
+	int type;
+	int subtype;
+	int nvoices;
+	snd_seq_oss_callback_t oper;
+	void *private_data;
+} snd_seq_oss_reg_t;
+
+/* device id */
+#define SNDRV_SEQ_DEV_ID_OSS		"seq-oss"
+
+#endif /* __SOUND_SEQ_OSS_H */
diff --git a/include/sound/seq_oss_legacy.h b/include/sound/seq_oss_legacy.h
new file mode 100644
index 000000000000..e66269ff9a44
--- /dev/null
+++ b/include/sound/seq_oss_legacy.h
@@ -0,0 +1,31 @@
+#ifndef __SOUND_SEQ_OSS_LEGACY_H
+#define __SOUND_SEQ_OSS_LEGACY_H
+
+/*
+ * OSS compatible macro definitions
+ *
+ * Copyright (C) 2000 Abramo Bagnara <abramo@alsa-project.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/soundcard.h>
+
+#ifndef SAMPLE_TYPE_AWE32
+#define SAMPLE_TYPE_AWE32		0x20
+#endif
+
+#endif /* __SOUND_SEQ_OSS_LEGACY_H */
+
diff --git a/include/sound/seq_virmidi.h b/include/sound/seq_virmidi.h
new file mode 100644
index 000000000000..cf4e2388103f
--- /dev/null
+++ b/include/sound/seq_virmidi.h
@@ -0,0 +1,84 @@
+#ifndef __SOUND_SEQ_VIRMIDI_H
+#define __SOUND_SEQ_VIRMIDI_H
+
+/*
+ *  Virtual Raw MIDI client on Sequencer
+ *  Copyright (c) 2000 by Takashi Iwai <tiwai@suse.de>,
+ *                        Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "rawmidi.h"
+#include "seq_midi_event.h"
+
+typedef struct _snd_virmidi_dev snd_virmidi_dev_t;
+
+/*
+ * device file instance:
+ * This instance is created at each time the midi device file is
+ * opened.  Each instance has its own input buffer and MIDI parser
+ * (buffer), and is associated with the device instance.
+ */
+typedef struct _snd_virmidi {
+	struct list_head list;
+	int seq_mode;
+	int client;
+	int port;
+	unsigned int trigger: 1;
+	snd_midi_event_t *parser;
+	snd_seq_event_t event;
+	snd_virmidi_dev_t *rdev;
+	snd_rawmidi_substream_t *substream;
+} snd_virmidi_t;
+
+#define SNDRV_VIRMIDI_SUBSCRIBE		(1<<0)
+#define SNDRV_VIRMIDI_USE		(1<<1)
+
+/*
+ * device record:
+ * Each virtual midi device has one device instance.  It contains
+ * common information and the linked-list of opened files, 
+ */
+struct _snd_virmidi_dev {
+	snd_card_t *card;		/* associated card */
+	snd_rawmidi_t *rmidi;		/* rawmidi device */
+	int seq_mode;			/* SNDRV_VIRMIDI_XXX */
+	int device;			/* sequencer device */
+	int client;			/* created/attached client */
+	int port;			/* created/attached port */
+	unsigned int flags;		/* SNDRV_VIRMIDI_* */
+	rwlock_t filelist_lock;
+	struct list_head filelist;
+};
+
+/* sequencer mode:
+ * ATTACH = input/output events from midi device are routed to the
+ *          attached sequencer port.  sequencer port is not created
+ *          by virmidi itself.
+ *          the input to rawmidi must be processed by passing the
+ *          incoming events via snd_virmidi_receive()
+ * DISPATCH = input/output events are routed to subscribers.
+ *            sequencer port is created in virmidi.
+ */
+#define SNDRV_VIRMIDI_SEQ_NONE		0
+#define SNDRV_VIRMIDI_SEQ_ATTACH	1
+#define SNDRV_VIRMIDI_SEQ_DISPATCH	2
+
+int snd_virmidi_new(snd_card_t *card, int device, snd_rawmidi_t **rrmidi);
+int snd_virmidi_receive(snd_rawmidi_t *rmidi, snd_seq_event_t *ev);
+
+#endif /* __SOUND_SEQ_VIRMIDI */
diff --git a/include/sound/sfnt_info.h b/include/sound/sfnt_info.h
new file mode 100644
index 000000000000..674585f88a31
--- /dev/null
+++ b/include/sound/sfnt_info.h
@@ -0,0 +1,214 @@
+#ifndef __SOUND_SFNT_INFO_H
+#define __SOUND_SFNT_INFO_H
+
+/*
+ *  Patch record compatible with AWE driver on OSS
+ *
+ *  Copyright (C) 1999-2000 Takashi Iwai
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+
+/*
+ * patch information record
+ */
+
+#ifdef SNDRV_BIG_ENDIAN
+#define SNDRV_OSS_PATCHKEY(id) (0xfd00|id)
+#else
+#define SNDRV_OSS_PATCHKEY(id) ((id<<8)|0xfd)
+#endif
+
+/* patch interface header: 16 bytes */
+typedef struct soundfont_patch_info_t {
+	unsigned short key;		/* use the key below */
+#define SNDRV_OSS_SOUNDFONT_PATCH		SNDRV_OSS_PATCHKEY(0x07)
+
+	short device_no;		/* synthesizer number */
+	unsigned short sf_id;		/* file id (should be zero) */
+	short optarg;			/* optional argument */
+	int len;			/* data length (without this header) */
+
+	short type;			/* patch operation type */
+#define SNDRV_SFNT_LOAD_INFO		0	/* awe_voice_rec */
+#define SNDRV_SFNT_LOAD_DATA		1	/* awe_sample_info */
+#define SNDRV_SFNT_OPEN_PATCH	2	/* awe_open_parm */
+#define SNDRV_SFNT_CLOSE_PATCH	3	/* none */
+	/* 4 is obsolete */
+#define SNDRV_SFNT_REPLACE_DATA	5	/* awe_sample_info (optarg=#channels)*/
+#define SNDRV_SFNT_MAP_PRESET	6	/* awe_voice_map */
+	/* 7 is not used */
+#define SNDRV_SFNT_PROBE_DATA		8	/* optarg=sample */
+#define SNDRV_SFNT_REMOVE_INFO		9	/* optarg=(bank<<8)|instr */
+
+	short reserved;			/* word alignment data */
+
+	/* the actual patch data begins after this */
+} soundfont_patch_info_t;
+
+
+/*
+ * open patch
+ */
+
+#define SNDRV_SFNT_PATCH_NAME_LEN	32
+
+typedef struct soundfont_open_parm_t {
+	unsigned short type;		/* sample type */
+#define SNDRV_SFNT_PAT_TYPE_MISC	0
+#define SNDRV_SFNT_PAT_TYPE_GUS	6
+#define SNDRV_SFNT_PAT_TYPE_MAP	7
+#define SNDRV_SFNT_PAT_LOCKED	0x100	/* lock the samples */
+#define SNDRV_SFNT_PAT_SHARED	0x200	/* sample is shared */
+
+	short reserved;
+	char name[SNDRV_SFNT_PATCH_NAME_LEN];
+} soundfont_open_parm_t;
+
+
+/*
+ * raw voice information record
+ */
+
+/* wave table envelope & effect parameters to control EMU8000 */
+typedef struct soundfont_voice_parm_t {
+	unsigned short moddelay;	/* modulation delay (0x8000) */
+	unsigned short modatkhld;	/* modulation attack & hold time (0x7f7f) */
+	unsigned short moddcysus;	/* modulation decay & sustain (0x7f7f) */
+	unsigned short modrelease;	/* modulation release time (0x807f) */
+	short modkeyhold, modkeydecay;	/* envelope change per key (not used) */
+	unsigned short voldelay;	/* volume delay (0x8000) */
+	unsigned short volatkhld;	/* volume attack & hold time (0x7f7f) */
+	unsigned short voldcysus;	/* volume decay & sustain (0x7f7f) */
+	unsigned short volrelease;	/* volume release time (0x807f) */
+	short volkeyhold, volkeydecay;	/* envelope change per key (not used) */
+	unsigned short lfo1delay;	/* LFO1 delay (0x8000) */
+	unsigned short lfo2delay;	/* LFO2 delay (0x8000) */
+	unsigned short pefe;		/* modulation pitch & cutoff (0x0000) */
+	unsigned short fmmod;		/* LFO1 pitch & cutoff (0x0000) */
+	unsigned short tremfrq;		/* LFO1 volume & freq (0x0000) */
+	unsigned short fm2frq2;		/* LFO2 pitch & freq (0x0000) */
+	unsigned char cutoff;		/* initial cutoff (0xff) */
+	unsigned char filterQ;		/* initial filter Q [0-15] (0x0) */
+	unsigned char chorus;		/* chorus send (0x00) */
+	unsigned char reverb;		/* reverb send (0x00) */
+	unsigned short reserved[4];	/* not used */
+} soundfont_voice_parm_t;
+
+
+/* wave table parameters: 92 bytes */
+typedef struct soundfont_voice_info_t {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* sample offset correction */
+	int loopstart, loopend;		/* loop offset correction */
+	short rate_offset;		/* sample rate pitch offset */
+	unsigned short mode;		/* sample mode */
+#define SNDRV_SFNT_MODE_ROMSOUND		0x8000
+#define SNDRV_SFNT_MODE_STEREO		1
+#define SNDRV_SFNT_MODE_LOOPING		2
+#define SNDRV_SFNT_MODE_NORELEASE		4	/* obsolete */
+#define SNDRV_SFNT_MODE_INIT_PARM		8
+
+	short root;			/* midi root key */
+	short tune;			/* pitch tuning (in cents) */
+	unsigned char low, high;	/* key note range */
+	unsigned char vellow, velhigh;	/* velocity range */
+	signed char fixkey, fixvel;	/* fixed key, velocity */
+	signed char pan, fixpan;	/* panning, fixed panning */
+	short exclusiveClass;		/* exclusive class (0 = none) */
+	unsigned char amplitude;	/* sample volume (127 max) */
+	unsigned char attenuation;	/* attenuation (0.375dB) */
+	short scaleTuning;		/* pitch scale tuning(%), normally 100 */
+	soundfont_voice_parm_t parm;	/* voice envelope parameters */
+	unsigned short sample_mode;	/* sample mode_flag (set by driver) */
+} soundfont_voice_info_t;
+
+
+/* instrument info header: 4 bytes */
+typedef struct soundfont_voice_rec_hdr_t {
+	unsigned char bank;		/* midi bank number */
+	unsigned char instr;		/* midi preset number */
+	char nvoices;			/* number of voices */
+	char write_mode;		/* write mode; normally 0 */
+#define SNDRV_SFNT_WR_APPEND		0	/* append anyway */
+#define SNDRV_SFNT_WR_EXCLUSIVE		1	/* skip if already exists */
+#define SNDRV_SFNT_WR_REPLACE		2	/* replace if already exists */
+} soundfont_voice_rec_hdr_t;
+
+
+/*
+ * sample wave information
+ */
+
+/* wave table sample header: 32 bytes */
+typedef struct soundfont_sample_info_t {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* start & end offset */
+	int loopstart, loopend;		/* loop start & end offset */
+	int size;			/* size (0 = ROM) */
+	short dummy;			/* not used */
+	unsigned short mode_flags;	/* mode flags */
+#define SNDRV_SFNT_SAMPLE_8BITS		1	/* wave data is 8bits */
+#define SNDRV_SFNT_SAMPLE_UNSIGNED	2	/* wave data is unsigned */
+#define SNDRV_SFNT_SAMPLE_NO_BLANK	4	/* no blank loop is attached */
+#define SNDRV_SFNT_SAMPLE_SINGLESHOT	8	/* single-shot w/o loop */
+#define SNDRV_SFNT_SAMPLE_BIDIR_LOOP	16	/* bidirectional looping */
+#define SNDRV_SFNT_SAMPLE_STEREO_LEFT	32	/* stereo left sound */
+#define SNDRV_SFNT_SAMPLE_STEREO_RIGHT	64	/* stereo right sound */
+#define SNDRV_SFNT_SAMPLE_REVERSE_LOOP	128	/* reverse looping */
+	unsigned int truesize;		/* used memory size (set by driver) */
+} soundfont_sample_info_t;
+
+
+/*
+ * voice preset mapping (aliasing)
+ */
+
+typedef struct soundfont_voice_map_t {
+	int map_bank, map_instr, map_key;	/* key = -1 means all keys */
+	int src_bank, src_instr, src_key;
+} soundfont_voice_map_t;
+
+
+/*
+ * ioctls for hwdep
+ */
+
+#define SNDRV_EMUX_HWDEP_NAME	"Emux WaveTable"
+
+#define SNDRV_EMUX_VERSION	((1 << 16) | (0 << 8) | 0)	/* 1.0.0 */
+
+struct sndrv_emux_misc_mode {
+	int port;	/* -1 = all */
+	int mode;
+	int value;
+	int value2;	/* reserved */
+};
+
+enum {
+	SNDRV_EMUX_IOCTL_VERSION = _IOR('H', 0x80, unsigned int),
+	SNDRV_EMUX_IOCTL_LOAD_PATCH = _IOWR('H', 0x81, soundfont_patch_info_t),
+	SNDRV_EMUX_IOCTL_RESET_SAMPLES = _IO('H', 0x82),
+	SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES = _IO('H', 0x83),
+	SNDRV_EMUX_IOCTL_MEM_AVAIL = _IOW('H', 0x84, int),
+	SNDRV_EMUX_IOCTL_MISC_MODE = _IOWR('H', 0x84, struct sndrv_emux_misc_mode),
+};
+
+#endif /* __SOUND_SFNT_INFO_H */
diff --git a/include/sound/snd_wavefront.h b/include/sound/snd_wavefront.h
new file mode 100644
index 000000000000..4b0b2b9370b9
--- /dev/null
+++ b/include/sound/snd_wavefront.h
@@ -0,0 +1,141 @@
+#ifndef __SOUND_SND_WAVEFRONT_H__
+#define __SOUND_SND_WAVEFRONT_H__
+
+#include "cs4231.h"
+#include "mpu401.h"
+#include "hwdep.h"
+#include "rawmidi.h"
+#include "wavefront.h"  /* generic OSS/ALSA/user-level wavefront header */
+
+/* MIDI interface */
+
+struct _snd_wavefront_midi;
+struct _snd_wavefront_card;
+struct _snd_wavefront;
+
+typedef struct _snd_wavefront_midi snd_wavefront_midi_t;
+typedef struct _snd_wavefront_card snd_wavefront_card_t;
+typedef struct _snd_wavefront snd_wavefront_t;
+
+typedef enum { internal_mpu = 0, external_mpu = 1 } snd_wavefront_mpu_id;
+
+struct _snd_wavefront_midi {
+        unsigned long            base;        /* I/O port address */
+	char                     isvirtual;   /* doing virtual MIDI stuff ? */
+	char			 istimer;     /* timer is used */
+        snd_wavefront_mpu_id     output_mpu;  /* most-recently-used */
+        snd_wavefront_mpu_id     input_mpu;   /* most-recently-used */
+        unsigned int             mode[2];     /* MPU401_MODE_XXX */
+	snd_rawmidi_substream_t	 *substream_output[2];
+	snd_rawmidi_substream_t	 *substream_input[2];
+	struct timer_list	 timer;
+        spinlock_t               open;
+        spinlock_t               virtual;     /* protects isvirtual */
+};
+
+#define	OUTPUT_READY	0x40
+#define	INPUT_AVAIL	0x80
+#define	MPU_ACK		0xFE
+#define	UART_MODE_ON	0x3F
+
+extern snd_rawmidi_ops_t snd_wavefront_midi_output;
+extern snd_rawmidi_ops_t snd_wavefront_midi_input;
+
+extern void   snd_wavefront_midi_enable_virtual (snd_wavefront_card_t *);
+extern void   snd_wavefront_midi_disable_virtual (snd_wavefront_card_t *);
+extern void   snd_wavefront_midi_interrupt (snd_wavefront_card_t *);
+extern int    snd_wavefront_midi_start (snd_wavefront_card_t *);
+
+struct _snd_wavefront {
+	unsigned long    irq;   /* "you were one, one of the few ..." */
+	unsigned long    base;  /* low i/o port address */
+	struct resource	 *res_base; /* i/o port resource allocation */
+
+#define mpu_data_port    base 
+#define mpu_command_port base + 1 /* write semantics */
+#define mpu_status_port  base + 1 /* read semantics */
+#define data_port        base + 2 
+#define status_port      base + 3 /* read semantics */
+#define control_port     base + 3 /* write semantics  */
+#define block_port       base + 4 /* 16 bit, writeonly */
+#define last_block_port  base + 6 /* 16 bit, writeonly */
+
+	/* FX ports. These are mapped through the ICS2115 to the YS225.
+	   The ICS2115 takes care of flipping the relevant pins on the
+	   YS225 so that access to each of these ports does the right
+	   thing. Note: these are NOT documented by Turtle Beach.
+	*/
+
+#define fx_status       base + 8 
+#define fx_op           base + 8 
+#define fx_lcr          base + 9 
+#define fx_dsp_addr     base + 0xa
+#define fx_dsp_page     base + 0xb 
+#define fx_dsp_lsb      base + 0xc 
+#define fx_dsp_msb      base + 0xd 
+#define fx_mod_addr     base + 0xe
+#define fx_mod_data     base + 0xf 
+
+	volatile int irq_ok;               /* set by interrupt handler */
+        volatile int irq_cnt;              /* ditto */
+	char debug;                        /* debugging flags */
+	int freemem;                       /* installed RAM, in bytes */ 
+
+	char fw_version[2];                /* major = [0], minor = [1] */
+	char hw_version[2];                /* major = [0], minor = [1] */
+	char israw;                        /* needs Motorola microcode */
+	char has_fx;                       /* has FX processor (Tropez+) */
+	char prog_status[WF_MAX_PROGRAM];  /* WF_SLOT_* */
+	char patch_status[WF_MAX_PATCH];   /* WF_SLOT_* */
+	char sample_status[WF_MAX_SAMPLE]; /* WF_ST_* | WF_SLOT_* */
+	int samples_used;                  /* how many */
+	char interrupts_are_midi;          /* h/w MPU interrupts enabled ? */
+	char rom_samples_rdonly;           /* can we write on ROM samples */
+	spinlock_t irq_lock;
+	wait_queue_head_t interrupt_sleeper; 
+	snd_wavefront_midi_t midi;         /* ICS2115 MIDI interface */
+};
+
+struct _snd_wavefront_card {
+	snd_wavefront_t wavefront;
+#ifdef CONFIG_PNP
+	struct pnp_dev *wss;
+	struct pnp_dev *ctrl;
+	struct pnp_dev *mpu;
+	struct pnp_dev *synth;
+#endif /* CONFIG_PNP */
+};
+
+extern void snd_wavefront_internal_interrupt (snd_wavefront_card_t *card);
+extern int  snd_wavefront_detect_irq (snd_wavefront_t *dev) ;
+extern int  snd_wavefront_check_irq (snd_wavefront_t *dev, int irq);
+extern int  snd_wavefront_restart (snd_wavefront_t *dev);
+extern int  snd_wavefront_start (snd_wavefront_t *dev);
+extern int  snd_wavefront_detect (snd_wavefront_card_t *card);
+extern int  snd_wavefront_config_midi (snd_wavefront_t *dev) ;
+extern int  snd_wavefront_cmd (snd_wavefront_t *, int, unsigned char *,
+			       unsigned char *);
+
+extern int snd_wavefront_synth_ioctl   (snd_hwdep_t *, 
+					struct file *,
+					unsigned int cmd, 
+					unsigned long arg);
+extern int  snd_wavefront_synth_open    (snd_hwdep_t *, struct file *);
+extern int  snd_wavefront_synth_release (snd_hwdep_t *, struct file *);
+
+/* FX processor - see also yss225.[ch] */
+
+extern int  snd_wavefront_fx_start  (snd_wavefront_t *);
+extern int  snd_wavefront_fx_detect (snd_wavefront_t *);
+extern int  snd_wavefront_fx_ioctl  (snd_hwdep_t *, 
+				     struct file *,
+				     unsigned int cmd, 
+				     unsigned long arg);
+extern int snd_wavefront_fx_open    (snd_hwdep_t *, struct file *);
+extern int snd_wavefront_fx_release (snd_hwdep_t *, struct file *);
+
+/* prefix in all snd_printk() delivered messages */
+
+#define LOGNAME "WaveFront: "
+
+#endif  /* __SOUND_SND_WAVEFRONT_H__ */
diff --git a/include/sound/soundfont.h b/include/sound/soundfont.h
new file mode 100644
index 000000000000..c992958f5e3c
--- /dev/null
+++ b/include/sound/soundfont.h
@@ -0,0 +1,130 @@
+#ifndef __SOUND_SOUNDFONT_H
+#define __SOUND_SOUNDFONT_H
+
+/*
+ *  Soundfont defines and definitions.
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *  Copyright (c) 1999-2000 Takashi iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "sfnt_info.h"
+#include "util_mem.h"
+
+#define SF_MAX_INSTRUMENTS	128	/* maximum instrument number */
+#define SF_MAX_PRESETS  256	/* drums are mapped from 128 to 256 */
+#define SF_IS_DRUM_BANK(z) ((z) == 128)
+
+typedef struct snd_sf_zone {
+	struct snd_sf_zone *next;	/* Link to next */
+	unsigned char bank;		/* Midi bank for this zone */
+	unsigned char instr;		/* Midi program for this zone */
+	unsigned char mapped;		/* True if mapped to something else */
+
+	soundfont_voice_info_t v;	/* All the soundfont parameters */
+	int counter;
+	struct snd_sf_sample *sample;	/* Link to sample */
+
+	/* The following deals with preset numbers (programs) */
+	struct snd_sf_zone *next_instr;	/* Next zone of this instrument */
+	struct snd_sf_zone *next_zone;	/* Next zone in play list */
+} snd_sf_zone_t;
+
+typedef struct snd_sf_sample {
+	soundfont_sample_info_t v;
+	int counter;
+	snd_util_memblk_t *block;	/* allocated data block */
+	struct snd_sf_sample *next;
+} snd_sf_sample_t;
+
+/*
+ * This represents all the information relating to a soundfont.
+ */
+typedef struct snd_soundfont {
+	struct snd_soundfont *next;	/* Link to next */
+	/*struct snd_soundfont *prev;*/	/* Link to previous */
+	short  id;		/* file id */
+	short  type;		/* font type */
+	unsigned char name[SNDRV_SFNT_PATCH_NAME_LEN];	/* identifier */
+	snd_sf_zone_t *zones; /* Font information */
+	snd_sf_sample_t *samples; /* The sample headers */
+} snd_soundfont_t;
+
+/*
+ * Type of the sample access callback
+ */
+typedef int (*snd_sf_sample_new_t)(void *private_data, snd_sf_sample_t *sp,
+				   snd_util_memhdr_t *hdr, const void __user *buf, long count);
+typedef int (*snd_sf_sample_free_t)(void *private_data, snd_sf_sample_t *sp,
+				    snd_util_memhdr_t *hdr);
+typedef void (*snd_sf_sample_reset_t)(void *private);
+
+typedef struct snd_sf_callback {
+	void *private_data;
+	snd_sf_sample_new_t sample_new;
+	snd_sf_sample_free_t sample_free;
+	snd_sf_sample_reset_t sample_reset;
+} snd_sf_callback_t;
+
+/*
+ * List of soundfonts.
+ */
+typedef struct snd_sf_list {
+	snd_soundfont_t *currsf; /* The currently open soundfont */
+	int open_client;	/* client pointer for lock */
+	int mem_used;		/* used memory size */
+	snd_sf_zone_t *presets[SF_MAX_PRESETS];
+	snd_soundfont_t *fonts; /* The list of soundfonts */
+	int fonts_size;	/* number of fonts allocated */
+	int zone_counter;	/* last allocated time for zone */
+	int sample_counter;	/* last allocated time for sample */
+	int zone_locked;	/* locked time for zone */
+	int sample_locked;	/* locked time for sample */
+	snd_sf_callback_t callback;	/* callback functions */
+	int presets_locked;
+	struct semaphore presets_mutex;
+	spinlock_t lock;
+	snd_util_memhdr_t *memhdr;
+} snd_sf_list_t;
+
+/* Prototypes for soundfont.c */
+int snd_soundfont_load(snd_sf_list_t *sflist, const void __user *data, long count, int client);
+int snd_soundfont_load_guspatch(snd_sf_list_t *sflist, const char __user *data,
+				long count, int client);
+int snd_soundfont_close_check(snd_sf_list_t *sflist, int client);
+
+snd_sf_list_t *snd_sf_new(snd_sf_callback_t *callback, snd_util_memhdr_t *hdr);
+void snd_sf_free(snd_sf_list_t *sflist);
+
+int snd_soundfont_remove_samples(snd_sf_list_t *sflist);
+int snd_soundfont_remove_unlocked(snd_sf_list_t *sflist);
+
+int snd_soundfont_search_zone(snd_sf_list_t *sflist, int *notep, int vel,
+			      int preset, int bank,
+			      int def_preset, int def_bank,
+			      snd_sf_zone_t **table, int max_layers);
+
+/* Parameter conversions */
+int snd_sf_calc_parm_hold(int msec);
+int snd_sf_calc_parm_attack(int msec);
+int snd_sf_calc_parm_decay(int msec);
+#define snd_sf_calc_parm_delay(msec) (0x8000 - (msec) * 1000 / 725);
+extern int snd_sf_vol_table[128];
+int snd_sf_linear_to_log(unsigned int amount, int offset, int ratio);
+
+
+#endif /* __SOUND_SOUNDFONT_H */
diff --git a/include/sound/sscape_ioctl.h b/include/sound/sscape_ioctl.h
new file mode 100644
index 000000000000..0d8885969c64
--- /dev/null
+++ b/include/sound/sscape_ioctl.h
@@ -0,0 +1,21 @@
+#ifndef SSCAPE_IOCTL_H
+#define SSCAPE_IOCTL_H
+
+
+struct sscape_bootblock
+{
+  unsigned char code[256];
+  unsigned version;
+};
+
+#define SSCAPE_MICROCODE_SIZE  65536
+
+struct sscape_microcode
+{
+  unsigned char __user *code;
+};
+
+#define SND_SSCAPE_LOAD_BOOTB  _IOWR('P', 100, struct sscape_bootblock)
+#define SND_SSCAPE_LOAD_MCODE  _IOW ('P', 101, struct sscape_microcode)
+
+#endif
diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h
new file mode 100644
index 000000000000..ad3c3be33c03
--- /dev/null
+++ b/include/sound/tea575x-tuner.h
@@ -0,0 +1,53 @@
+#ifndef __SOUND_TEA575X_TUNER_H
+#define __SOUND_TEA575X_TUNER_H
+
+/*
+ *   ALSA driver for TEA5757/5759 Philips AM/FM tuner chips
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@suse.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */      
+
+#include <linux/videodev.h>
+
+typedef struct snd_tea575x tea575x_t;
+
+struct snd_tea575x_ops {
+	void (*write)(tea575x_t *tea, unsigned int val);
+	unsigned int (*read)(tea575x_t *tea);
+};
+
+struct snd_tea575x {
+	snd_card_t *card;
+	struct video_device vd;		/* video device */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0)
+	struct file_operations fops;
+#endif
+	int dev_nr;			/* requested device number + 1 */
+	int vd_registered;		/* video device is registered */
+	int tea5759;			/* 5759 chip is present */
+	unsigned int freq_fixup;	/* crystal onboard */
+	unsigned int val;		/* hw value */
+	unsigned long freq;		/* frequency */
+	struct snd_tea575x_ops *ops;
+	void *private_data;
+};
+
+void snd_tea575x_init(tea575x_t *tea);
+void snd_tea575x_exit(tea575x_t *tea);
+
+#endif /* __SOUND_TEA575X_TUNER_H */
diff --git a/include/sound/tea6330t.h b/include/sound/tea6330t.h
new file mode 100644
index 000000000000..3896c0a50907
--- /dev/null
+++ b/include/sound/tea6330t.h
@@ -0,0 +1,42 @@
+#ifndef __SOUND_TEA6330T_H
+#define __SOUND_TEA6330T_H
+
+/*
+ *  Routines for control of TEA6330T circuit.
+ *  Sound fader control circuit for car radios.
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ */
+
+#include "control.h"
+#include "i2c.h"		/* generic i2c support */
+
+typedef struct {
+	snd_i2c_device_t *device;
+	snd_i2c_bus_t *bus;
+	int equalizer;
+	int fader;
+	unsigned char regs[8];
+	unsigned char mleft, mright;
+	unsigned char bass, treble;
+	unsigned char max_bass, max_treble;
+} tea6330t_t;
+
+extern int snd_tea6330t_detect(snd_i2c_bus_t *bus, int equalizer);
+extern int snd_tea6330t_update_mixer(snd_card_t * card, snd_i2c_bus_t * bus, int equalizer, int fader);
+
+#endif /* __SOUND_TEA6330T_H */
diff --git a/include/sound/timer.h b/include/sound/timer.h
new file mode 100644
index 000000000000..57fde990606e
--- /dev/null
+++ b/include/sound/timer.h
@@ -0,0 +1,157 @@
+#ifndef __SOUND_TIMER_H
+#define __SOUND_TIMER_H
+
+/*
+ *  Timer abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ *		     Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/interrupt.h>
+
+typedef enum sndrv_timer_class snd_timer_class_t;
+typedef enum sndrv_timer_slave_class snd_timer_slave_class_t;
+typedef enum sndrv_timer_global snd_timer_global_t;
+typedef struct sndrv_timer_id snd_timer_id_t;
+typedef struct sndrv_timer_ginfo snd_timer_ginfo_t;
+typedef struct sndrv_timer_gparams snd_timer_gparams_t;
+typedef struct sndrv_timer_gstatus snd_timer_gstatus_t;
+typedef struct sndrv_timer_select snd_timer_select_t;
+typedef struct sndrv_timer_info snd_timer_info_t;
+typedef struct sndrv_timer_params snd_timer_params_t;
+typedef struct sndrv_timer_status snd_timer_status_t;
+typedef struct sndrv_timer_read snd_timer_read_t;
+typedef struct sndrv_timer_tread snd_timer_tread_t;
+
+#define snd_timer_chip(timer) ((timer)->private_data)
+
+#define SNDRV_TIMER_DEVICES	16
+
+#define SNDRV_TIMER_DEV_FLG_PCM	0x10000000
+
+#define SNDRV_TIMER_HW_AUTO	0x00000001	/* auto trigger is supported */
+#define SNDRV_TIMER_HW_STOP	0x00000002	/* call stop before start */
+#define SNDRV_TIMER_HW_SLAVE	0x00000004	/* only slave timer (variable resolution) */
+#define SNDRV_TIMER_HW_FIRST	0x00000008	/* first tick can be incomplete */
+#define SNDRV_TIMER_HW_TASKLET	0x00000010	/* timer is called from tasklet */
+
+#define SNDRV_TIMER_IFLG_SLAVE	  0x00000001
+#define SNDRV_TIMER_IFLG_RUNNING  0x00000002
+#define SNDRV_TIMER_IFLG_START	  0x00000004
+#define SNDRV_TIMER_IFLG_AUTO	  0x00000008	/* auto restart */
+#define SNDRV_TIMER_IFLG_FAST	  0x00000010	/* fast callback (do not use tasklet) */
+#define SNDRV_TIMER_IFLG_CALLBACK 0x00000020	/* timer callback is active */
+#define SNDRV_TIMER_IFLG_EXCLUSIVE 0x00000040	/* exclusive owner - no more instances */
+#define SNDRV_TIMER_IFLG_EARLY_EVENT 0x00000080	/* write early event to the poll queue */
+
+#define SNDRV_TIMER_FLG_CHANGE	0x00000001
+#define SNDRV_TIMER_FLG_RESCHED	0x00000002	/* need reschedule */
+
+typedef void (*snd_timer_callback_t) (snd_timer_instance_t * timeri, unsigned long ticks, unsigned long resolution);
+typedef void (*snd_timer_ccallback_t) (snd_timer_instance_t * timeri, enum sndrv_timer_event event,
+				       struct timespec * tstamp, unsigned long resolution);
+
+struct _snd_timer_hardware {
+	/* -- must be filled with low-level driver */
+	unsigned int flags;		/* various flags */
+	unsigned long resolution;	/* average timer resolution for one tick in nsec */
+	unsigned long resolution_min;	/* minimal resolution */
+	unsigned long resolution_max;	/* maximal resolution */
+	unsigned long ticks;		/* max timer ticks per interrupt */
+	/* -- low-level functions -- */
+	int (*open) (snd_timer_t * timer);
+	int (*close) (snd_timer_t * timer);
+	unsigned long (*c_resolution) (snd_timer_t * timer);
+	int (*start) (snd_timer_t * timer);
+	int (*stop) (snd_timer_t * timer);
+	int (*set_period) (snd_timer_t * timer, unsigned long period_num, unsigned long period_den);
+	int (*precise_resolution) (snd_timer_t * timer, unsigned long *num, unsigned long *den);
+};
+
+struct _snd_timer {
+	snd_timer_class_t tmr_class;
+	snd_card_t *card;
+	int tmr_device;
+	int tmr_subdevice;
+	char id[64];
+	char name[80];
+	unsigned int flags;
+	int running;			/* running instances */
+	unsigned long sticks;		/* schedule ticks */
+	void *private_data;
+	void (*private_free) (snd_timer_t *timer);
+	struct _snd_timer_hardware hw;
+	spinlock_t lock;
+	struct list_head device_list;
+	struct list_head open_list_head;
+	struct list_head active_list_head;
+	struct list_head ack_list_head;
+	struct list_head sack_list_head; /* slow ack list head */
+	struct tasklet_struct task_queue;
+};
+
+struct _snd_timer_instance {
+	snd_timer_t * timer;
+	char *owner;
+	unsigned int flags;
+	void *private_data;
+	void (*private_free) (snd_timer_instance_t *ti);
+	snd_timer_callback_t callback;
+	snd_timer_ccallback_t ccallback;
+	void *callback_data;
+	unsigned long ticks;		/* auto-load ticks when expired */
+	unsigned long cticks;		/* current ticks */
+	unsigned long pticks;		/* accumulated ticks for callback */
+	unsigned long resolution;	/* current resolution for tasklet */
+	unsigned long lost;		/* lost ticks */
+	snd_timer_slave_class_t slave_class;
+	unsigned int slave_id;
+	struct list_head open_list;
+	struct list_head active_list;
+	struct list_head ack_list;
+	struct list_head slave_list_head;
+	struct list_head slave_active_head;
+	snd_timer_instance_t *master;
+};
+
+/*
+ *  Registering
+ */
+
+extern int snd_timer_new(snd_card_t *card, char *id, snd_timer_id_t *tid, snd_timer_t ** rtimer);
+extern void snd_timer_notify(snd_timer_t *timer, enum sndrv_timer_event event, struct timespec *tstamp);
+extern int snd_timer_global_new(char *id, int device, snd_timer_t **rtimer);
+extern int snd_timer_global_free(snd_timer_t *timer);
+extern int snd_timer_global_register(snd_timer_t *timer);
+extern int snd_timer_global_unregister(snd_timer_t *timer);
+
+extern int snd_timer_open(snd_timer_instance_t ** ti, char *owner, snd_timer_id_t *tid, unsigned int slave_id);
+extern int snd_timer_close(snd_timer_instance_t * timeri);
+extern unsigned long snd_timer_resolution(snd_timer_instance_t * timeri);
+extern int snd_timer_start(snd_timer_instance_t * timeri, unsigned int ticks);
+extern int snd_timer_stop(snd_timer_instance_t * timeri);
+extern int snd_timer_continue(snd_timer_instance_t * timeri);
+extern int snd_timer_pause(snd_timer_instance_t * timeri);
+
+extern void snd_timer_interrupt(snd_timer_t * timer, unsigned long ticks_left);
+
+extern unsigned int snd_timer_system_resolution(void);
+
+#endif /* __SOUND_TIMER_H */
diff --git a/include/sound/trident.h b/include/sound/trident.h
new file mode 100644
index 000000000000..f5254ec36e6a
--- /dev/null
+++ b/include/sound/trident.h
@@ -0,0 +1,479 @@
+#ifndef __SOUND_TRIDENT_H
+#define __SOUND_TRIDENT_H
+
+/*
+ *  audio@tridentmicro.com
+ *  Fri Feb 19 15:55:28 MST 1999
+ *  Definitions for Trident 4DWave DX/NX chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "mpu401.h"
+#include "ac97_codec.h"
+#include "seq_midi_emul.h"
+#include "seq_device.h"
+#include "util_mem.h"
+//#include "ainstr_iw.h"
+//#include "ainstr_gf1.h"
+#include "ainstr_simple.h"
+
+#ifndef PCI_VENDOR_ID_TRIDENT
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#endif
+#ifndef PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
+#endif
+#ifndef PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
+#endif
+
+#ifndef PCI_VENDOR_ID_SI
+#define PCI_VENDOR_ID_SI		0x1039
+#endif
+#ifndef PCI_DEVICE_ID_SI_7018
+#define PCI_DEVICE_ID_SI_7018		0x7018
+#endif
+
+#define TRIDENT_DEVICE_ID_DX		((PCI_VENDOR_ID_TRIDENT<<16)|PCI_DEVICE_ID_TRIDENT_4DWAVE_DX)
+#define TRIDENT_DEVICE_ID_NX		((PCI_VENDOR_ID_TRIDENT<<16)|PCI_DEVICE_ID_TRIDENT_4DWAVE_NX)
+#define TRIDENT_DEVICE_ID_SI7018	((PCI_VENDOR_ID_SI<<16)|PCI_DEVICE_ID_SI_7018)
+
+#define SNDRV_SEQ_DEV_ID_TRIDENT			"trident-synth"
+
+#define SNDRV_TRIDENT_VOICE_TYPE_PCM		0
+#define SNDRV_TRIDENT_VOICE_TYPE_SYNTH		1
+#define SNDRV_TRIDENT_VOICE_TYPE_MIDI		2
+
+#define SNDRV_TRIDENT_VFLG_RUNNING		(1<<0)
+
+/* TLB code constants */
+#define SNDRV_TRIDENT_PAGE_SIZE			4096
+#define SNDRV_TRIDENT_PAGE_SHIFT			12
+#define SNDRV_TRIDENT_PAGE_MASK			((1<<SNDRV_TRIDENT_PAGE_SHIFT)-1)
+#define SNDRV_TRIDENT_MAX_PAGES			4096
+
+/*
+ * Direct registers
+ */
+
+#define TRID_REG(trident, x) ((trident)->port + (x))
+
+#define ID_4DWAVE_DX        0x2000
+#define ID_4DWAVE_NX        0x2001
+
+/* Bank definitions */
+
+#define T4D_BANK_A	0
+#define T4D_BANK_B	1
+#define T4D_NUM_BANKS	2
+
+/* Register definitions */
+
+/* Global registers */
+
+enum global_control_bits {
+	CHANNEL_IDX	= 0x0000003f,
+	OVERRUN_IE	= 0x00000400,	/* interrupt enable: capture overrun */
+	UNDERRUN_IE	= 0x00000800,	/* interrupt enable: playback underrun */
+	ENDLP_IE	= 0x00001000,	/* interrupt enable: end of buffer */
+	MIDLP_IE	= 0x00002000,	/* interrupt enable: middle buffer */
+	ETOG_IE		= 0x00004000,	/* interrupt enable: envelope toggling */
+	EDROP_IE	= 0x00008000,	/* interrupt enable: envelope drop */
+	BANK_B_EN	= 0x00010000,	/* SiS: enable bank B (64 channels) */
+	PCMIN_B_MIX	= 0x00020000,	/* SiS: PCM IN B mixing enable */
+	I2S_OUT_ASSIGN	= 0x00040000,	/* SiS: I2S Out contains surround PCM */
+	SPDIF_OUT_ASSIGN= 0x00080000,	/* SiS: 0=S/PDIF L/R | 1=PCM Out FIFO */
+	MAIN_OUT_ASSIGN = 0x00100000,	/* SiS: 0=PCM Out FIFO | 1=MMC Out buffer */
+};
+
+enum miscint_bits {
+	PB_UNDERRUN_IRQ = 0x00000001, REC_OVERRUN_IRQ = 0x00000002,
+	SB_IRQ		= 0x00000004, MPU401_IRQ      = 0x00000008,
+	OPL3_IRQ        = 0x00000010, ADDRESS_IRQ     = 0x00000020,
+	ENVELOPE_IRQ    = 0x00000040, PB_UNDERRUN     = 0x00000100,
+	REC_OVERRUN	= 0x00000200, MIXER_UNDERFLOW = 0x00000400,
+	MIXER_OVERFLOW  = 0x00000800, NX_SB_IRQ_DISABLE = 0x00001000,
+        ST_TARGET_REACHED = 0x00008000,
+	PB_24K_MODE     = 0x00010000, ST_IRQ_EN       = 0x00800000,
+	ACGPIO_IRQ	= 0x01000000
+};
+
+/* T2 legacy dma control registers. */
+#define LEGACY_DMAR0                0x00  // ADR0
+#define LEGACY_DMAR4                0x04  // CNT0
+#define LEGACY_DMAR6		    0x06  // CNT0 - High bits
+#define LEGACY_DMAR11               0x0b  // MOD 
+#define LEGACY_DMAR15               0x0f  // MMR 
+
+#define T4D_START_A		     0x80
+#define T4D_STOP_A		     0x84
+#define T4D_DLY_A		     0x88
+#define T4D_SIGN_CSO_A		     0x8c
+#define T4D_CSPF_A		     0x90
+#define T4D_CSPF_B		     0xbc
+#define T4D_CEBC_A		     0x94
+#define T4D_AINT_A		     0x98
+#define T4D_AINTEN_A		     0x9c
+#define T4D_LFO_GC_CIR               0xa0
+#define T4D_MUSICVOL_WAVEVOL         0xa8
+#define T4D_SBDELTA_DELTA_R          0xac
+#define T4D_MISCINT                  0xb0
+#define T4D_START_B                  0xb4
+#define T4D_STOP_B                   0xb8
+#define T4D_SBBL_SBCL                0xc0
+#define T4D_SBCTRL_SBE2R_SBDD        0xc4
+#define T4D_STIMER		     0xc8
+#define T4D_AINT_B                   0xd8
+#define T4D_AINTEN_B                 0xdc
+#define T4D_RCI                      0x70
+
+/* MPU-401 UART */
+#define T4D_MPU401_BASE             0x20
+#define T4D_MPUR0                   0x20
+#define T4D_MPUR1                   0x21
+#define T4D_MPUR2                   0x22
+#define T4D_MPUR3                   0x23
+
+/* S/PDIF Registers */
+#define NX_SPCTRL_SPCSO             0x24
+#define NX_SPLBA                    0x28
+#define NX_SPESO                    0x2c
+#define NX_SPCSTATUS                0x64
+
+/* Joystick */
+#define GAMEPORT_GCR                0x30
+#define GAMEPORT_MODE_ADC           0x80
+#define GAMEPORT_LEGACY             0x31
+#define GAMEPORT_AXES               0x34
+
+/* NX Specific Registers */
+#define NX_TLBC                     0x6c
+
+/* Channel Registers */
+
+#define CH_START		    0xe0
+
+#define CH_DX_CSO_ALPHA_FMS         0xe0
+#define CH_DX_ESO_DELTA             0xe8
+#define CH_DX_FMC_RVOL_CVOL         0xec
+
+#define CH_NX_DELTA_CSO             0xe0
+#define CH_NX_DELTA_ESO             0xe8
+#define CH_NX_ALPHA_FMS_FMC_RVOL_CVOL 0xec
+
+#define CH_LBA                      0xe4
+#define CH_GVSEL_PAN_VOL_CTRL_EC    0xf0
+#define CH_EBUF1                    0xf4
+#define CH_EBUF2                    0xf8
+
+/* AC-97 Registers */
+
+#define DX_ACR0_AC97_W              0x40
+#define DX_ACR1_AC97_R              0x44
+#define DX_ACR2_AC97_COM_STAT       0x48
+
+#define NX_ACR0_AC97_COM_STAT       0x40
+#define NX_ACR1_AC97_W              0x44
+#define NX_ACR2_AC97_R_PRIMARY      0x48
+#define NX_ACR3_AC97_R_SECONDARY    0x4c
+
+#define SI_AC97_WRITE		    0x40
+#define SI_AC97_READ		    0x44
+#define SI_SERIAL_INTF_CTRL	    0x48
+#define SI_AC97_GPIO		    0x4c
+#define SI_ASR0			    0x50
+#define SI_SPDIF_CS		    0x70
+#define SI_GPIO			    0x7c
+
+enum trident_nx_ac97_bits {
+	/* ACR1-3 */
+	NX_AC97_BUSY_WRITE 	= 0x0800,
+	NX_AC97_BUSY_READ	= 0x0800,
+	NX_AC97_BUSY_DATA 	= 0x0400,
+	NX_AC97_WRITE_SECONDARY = 0x0100,
+	/* ACR0 */
+	NX_AC97_SECONDARY_READY = 0x0040,
+	NX_AC97_SECONDARY_RECORD = 0x0020,
+	NX_AC97_SURROUND_OUTPUT = 0x0010,
+	NX_AC97_PRIMARY_READY	= 0x0008,
+	NX_AC97_PRIMARY_RECORD	= 0x0004,
+	NX_AC97_PCM_OUTPUT	= 0x0002,
+	NX_AC97_WARM_RESET	= 0x0001
+};
+
+enum trident_dx_ac97_bits {
+	DX_AC97_BUSY_WRITE	= 0x8000,
+	DX_AC97_BUSY_READ	= 0x8000,
+	DX_AC97_READY		= 0x0010,
+	DX_AC97_RECORD		= 0x0008,
+	DX_AC97_PLAYBACK	= 0x0002
+};
+
+enum sis7018_ac97_bits {
+	SI_AC97_BUSY_WRITE =	0x00008000,
+	SI_AC97_AUDIO_BUSY =	0x00004000,
+	SI_AC97_MODEM_BUSY =	0x00002000,
+	SI_AC97_BUSY_READ =	0x00008000,
+	SI_AC97_SECONDARY =	0x00000080,
+};
+
+enum serial_intf_ctrl_bits {
+	WARM_RESET	= 0x00000001,
+	COLD_RESET	= 0x00000002,
+	I2S_CLOCK	= 0x00000004,
+	PCM_SEC_AC97	= 0x00000008,
+	AC97_DBL_RATE	= 0x00000010,
+	SPDIF_EN	= 0x00000020,
+	I2S_OUTPUT_EN	= 0x00000040,
+	I2S_INPUT_EN	= 0x00000080,
+	PCMIN		= 0x00000100,
+	LINE1IN		= 0x00000200,
+	MICIN		= 0x00000400,
+	LINE2IN		= 0x00000800,
+	HEAD_SET_IN	= 0x00001000,
+	GPIOIN		= 0x00002000,
+	/* 7018 spec says id = 01 but the demo board routed to 10
+	   SECONDARY_ID= 0x00004000, */
+	SECONDARY_ID	= 0x00004000,
+	PCMOUT		= 0x00010000,
+	SURROUT		= 0x00020000,
+	CENTEROUT	= 0x00040000,
+	LFEOUT		= 0x00080000,
+	LINE1OUT	= 0x00100000,
+	LINE2OUT	= 0x00200000,
+	GPIOOUT		= 0x00400000,
+	SI_AC97_PRIMARY_READY = 0x01000000,
+	SI_AC97_SECONDARY_READY = 0x02000000,
+	SI_AC97_POWERDOWN = 0x04000000,
+};
+                                                                                                                                   
+/* PCM defaults */
+
+#define T4D_DEFAULT_PCM_VOL	10	/* 0 - 255 */
+#define T4D_DEFAULT_PCM_PAN	0	/* 0 - 127 */
+#define T4D_DEFAULT_PCM_RVOL	127	/* 0 - 127 */
+#define T4D_DEFAULT_PCM_CVOL	127	/* 0 - 127 */
+
+typedef struct _snd_trident trident_t;
+typedef struct _snd_trident_voice snd_trident_voice_t;
+typedef struct _snd_trident_pcm_mixer snd_trident_pcm_mixer_t;
+
+typedef struct {
+	void (*sample_start)(trident_t *gus, snd_trident_voice_t *voice, snd_seq_position_t position);
+	void (*sample_stop)(trident_t *gus, snd_trident_voice_t *voice, snd_seq_stop_mode_t mode);
+	void (*sample_freq)(trident_t *gus, snd_trident_voice_t *voice, snd_seq_frequency_t freq);
+	void (*sample_volume)(trident_t *gus, snd_trident_voice_t *voice, snd_seq_ev_volume_t *volume);
+	void (*sample_loop)(trident_t *card, snd_trident_voice_t *voice, snd_seq_ev_loop_t *loop);
+	void (*sample_pos)(trident_t *card, snd_trident_voice_t *voice, snd_seq_position_t position);
+	void (*sample_private1)(trident_t *card, snd_trident_voice_t *voice, unsigned char *data);
+} snd_trident_sample_ops_t;
+
+typedef struct {
+	snd_midi_channel_set_t * chset;
+	trident_t * trident;
+	int mode;		/* operation mode */
+	int client;		/* sequencer client number */
+	int port;		/* sequencer port number */
+	unsigned int midi_has_voices: 1;
+} snd_trident_port_t;
+
+typedef struct snd_trident_memblk_arg {
+	short first_page, last_page;
+} snd_trident_memblk_arg_t;
+
+typedef struct {
+	unsigned int * entries;		/* 16k-aligned TLB table */
+	dma_addr_t entries_dmaaddr;	/* 16k-aligned PCI address to TLB table */
+	unsigned long * shadow_entries;	/* shadow entries with virtual addresses */
+	struct snd_dma_buffer buffer;
+	snd_util_memhdr_t * memhdr;	/* page allocation list */
+	struct snd_dma_buffer silent_page;
+} snd_trident_tlb_t;
+
+struct _snd_trident_voice {
+	unsigned int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth:1,
+	    midi: 1;
+	unsigned int flags;
+	unsigned char client;
+	unsigned char port;
+	unsigned char index;
+
+	snd_seq_instr_t instr;
+	snd_trident_sample_ops_t *sample_ops;
+
+	/* channel parameters */
+	unsigned int CSO;		/* 24 bits (16 on DX) */
+	unsigned int ESO;		/* 24 bits (16 on DX) */
+	unsigned int LBA;		/* 30 bits */
+	unsigned short EC;		/* 12 bits */
+	unsigned short Alpha;		/* 12 bits */
+	unsigned short Delta;		/* 16 bits */
+	unsigned short Attribute;	/* 16 bits - SiS 7018 */
+	unsigned short Vol;		/* 12 bits (6.6) */
+	unsigned char Pan;		/* 7 bits (1.4.2) */
+	unsigned char GVSel;		/* 1 bit */
+	unsigned char RVol;		/* 7 bits (5.2) */
+	unsigned char CVol;		/* 7 bits (5.2) */
+	unsigned char FMC;		/* 2 bits */
+	unsigned char CTRL;		/* 4 bits */
+	unsigned char FMS;		/* 4 bits */
+	unsigned char LFO;		/* 8 bits */
+
+	unsigned int negCSO;	/* nonzero - use negative CSO */
+
+	snd_util_memblk_t *memblk;	/* memory block if TLB enabled */
+
+	/* PCM data */
+
+	trident_t *trident;
+	snd_pcm_substream_t *substream;
+	snd_trident_voice_t *extra;	/* extra PCM voice (acts as interrupt generator) */
+	unsigned int running: 1,
+            capture: 1,
+            spdif: 1,
+            foldback: 1,
+            isync: 1,
+            isync2: 1,
+            isync3: 1;
+	int foldback_chan;		/* foldback subdevice number */
+	unsigned int stimer;		/* global sample timer (to detect spurious interrupts) */
+	unsigned int spurious_threshold; /* spurious threshold */
+	unsigned int isync_mark;
+	unsigned int isync_max;
+	unsigned int isync_ESO;
+
+	/* --- */
+
+	void *private_data;
+	void (*private_free)(snd_trident_voice_t *voice);
+};
+
+struct _snd_4dwave {
+	int seq_client;
+
+	snd_trident_port_t seq_ports[4];
+	snd_simple_ops_t simple_ops;
+	snd_seq_kinstr_list_t *ilist;
+
+	snd_trident_voice_t voices[64];	
+
+	int ChanSynthCount;		/* number of allocated synth channels */
+	int max_size;			/* maximum synth memory size in bytes */
+	int current_size;		/* current allocated synth mem in bytes */
+};
+
+struct _snd_trident_pcm_mixer {
+	snd_trident_voice_t *voice;	/* active voice */
+	unsigned short vol;		/* front volume */
+	unsigned char pan;		/* pan control */
+	unsigned char rvol;		/* rear volume */
+	unsigned char cvol;		/* center volume */
+	unsigned char pad;
+};
+
+struct _snd_trident {
+	int irq;
+
+	unsigned int device;	/* device ID */
+
+        unsigned char  bDMAStart;
+
+	unsigned long port;
+	unsigned long midi_port;
+
+	unsigned int spurious_irq_count;
+	unsigned int spurious_irq_max_delta;
+
+        snd_trident_tlb_t tlb;	/* TLB entries for NX cards */
+
+	unsigned char spdif_ctrl;
+	unsigned char spdif_pcm_ctrl;
+	unsigned int spdif_bits;
+	unsigned int spdif_pcm_bits;
+	snd_kcontrol_t *spdif_pcm_ctl;	/* S/PDIF settings */
+	unsigned int ac97_ctrl;
+        
+        unsigned int ChanMap[2];	/* allocation map for hardware channels */
+        
+        int ChanPCM;			/* max number of PCM channels */
+	int ChanPCMcnt;			/* actual number of PCM channels */
+
+	unsigned int ac97_detect: 1;	/* 1 = AC97 in detection phase */
+	unsigned int in_suspend: 1;	/* 1 during suspend/resume */
+
+	struct _snd_4dwave synth;	/* synth specific variables */
+
+	spinlock_t event_lock;
+	spinlock_t voice_alloc;
+
+	struct snd_dma_device dma_dev;
+
+	struct pci_dev *pci;
+	snd_card_t *card;
+	snd_pcm_t *pcm;		/* ADC/DAC PCM */
+	snd_pcm_t *foldback;	/* Foldback PCM */
+	snd_pcm_t *spdif;	/* SPDIF PCM */
+	snd_rawmidi_t *rmidi;
+	snd_seq_device_t *seq_dev;
+
+	ac97_bus_t *ac97_bus;
+	ac97_t *ac97;
+	ac97_t *ac97_sec;
+
+	unsigned int musicvol_wavevol;
+	snd_trident_pcm_mixer_t pcm_mixer[32];
+	snd_kcontrol_t *ctl_vol;	/* front volume */
+	snd_kcontrol_t *ctl_pan;	/* pan */
+	snd_kcontrol_t *ctl_rvol;	/* rear volume */
+	snd_kcontrol_t *ctl_cvol;	/* center volume */
+
+	spinlock_t reg_lock;
+
+	struct gameport *gameport;
+};
+
+int snd_trident_create(snd_card_t * card,
+		       struct pci_dev *pci,
+		       int pcm_streams,
+		       int pcm_spdif_device,
+		       int max_wavetable_size,
+		       trident_t ** rtrident);
+int snd_trident_create_gameport(trident_t *trident);
+
+int snd_trident_pcm(trident_t * trident, int device, snd_pcm_t **rpcm);
+int snd_trident_foldback_pcm(trident_t * trident, int device, snd_pcm_t **rpcm);
+int snd_trident_spdif_pcm(trident_t * trident, int device, snd_pcm_t **rpcm);
+int snd_trident_attach_synthesizer(trident_t * trident);
+snd_trident_voice_t *snd_trident_alloc_voice(trident_t * trident, int type, int client, int port);
+void snd_trident_free_voice(trident_t * trident, snd_trident_voice_t *voice);
+void snd_trident_start_voice(trident_t * trident, unsigned int voice);
+void snd_trident_stop_voice(trident_t * trident, unsigned int voice);
+void snd_trident_write_voice_regs(trident_t * trident, snd_trident_voice_t *voice);
+
+/* TLB memory allocation */
+snd_util_memblk_t *snd_trident_alloc_pages(trident_t *trident, snd_pcm_substream_t *substream);
+int snd_trident_free_pages(trident_t *trident, snd_util_memblk_t *blk);
+snd_util_memblk_t *snd_trident_synth_alloc(trident_t *trident, unsigned int size);
+int snd_trident_synth_free(trident_t *trident, snd_util_memblk_t *blk);
+int snd_trident_synth_copy_from_user(trident_t *trident, snd_util_memblk_t *blk, int offset, const char __user *data, int size);
+
+#endif /* __SOUND_TRIDENT_H */
diff --git a/include/sound/uda1341.h b/include/sound/uda1341.h
new file mode 100644
index 000000000000..61ff65a628bc
--- /dev/null
+++ b/include/sound/uda1341.h
@@ -0,0 +1,233 @@
+/*
+ *  linux/include/linux/l3/uda1341.h
+ *
+ * Philips UDA1341 mixer device driver for ALSA
+ *
+ * Copyright (c) 2002 Tomas Kasparek <tomas.kasparek@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ *
+ * History:
+ *
+ * 2002-03-13 Tomas Kasparek Initial release - based on uda1341.h from OSS
+ * 2002-03-30 Tomas Kasparek Proc filesystem support, complete mixer and DSP
+ *                           features support
+ */
+
+/* $Id: uda1341.h,v 1.6 2004/05/03 17:36:50 tiwai Exp $ */
+
+#define UDA1341_ALSA_NAME "snd-uda1341"
+
+/*
+ * Default rate set after inicialization
+ */
+#define AUDIO_RATE_DEFAULT	44100
+
+/*
+ * UDA1341 L3 address and command types
+ */
+#define UDA1341_L3ADDR		5
+#define UDA1341_DATA0		(UDA1341_L3ADDR << 2 | 0)
+#define UDA1341_DATA1		(UDA1341_L3ADDR << 2 | 1)
+#define UDA1341_STATUS		(UDA1341_L3ADDR << 2 | 2)
+
+enum uda1341_onoff {
+	OFF=0,
+	ON,
+};
+
+const char *onoff_names[] = {
+	"Off",
+	"On",
+};
+
+enum uda1341_format {
+	I2S=0,
+	LSB16,
+	LSB18,
+	LSB20,
+	MSB,
+	LSB16MSB,
+	LSB18MSB,
+	LSB20MSB,        
+};
+
+const char *format_names[] = {
+	"I2S-bus",
+	"LSB 16bits",
+	"LSB 18bits",
+	"LSB 20bits",
+	"MSB",
+	"in LSB 16bits/out MSB",
+	"in LSB 18bits/out MSB",
+	"in LSB 20bits/out MSB",        
+};
+
+enum uda1341_fs {
+	F512=0,
+	F384,
+	F256,
+	Funused,
+};
+
+const char *fs_names[] = {
+	"512*fs",
+	"384*fs",
+	"256*fs",
+	"Unused - bad value!",
+};
+
+enum uda1341_peak {
+	BEFORE=0,
+	AFTER,
+};
+
+const char *peak_names[] = {
+	"before",
+	"after",
+};
+
+enum uda1341_filter {
+	FLAT=0,
+	MIN,
+	MIN2,
+	MAX,
+};
+
+const char *filter_names[] = {
+	"flat",
+	"min",
+	"min",
+	"max",
+};
+
+const char*bass_values[][16] = {
+	{"0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB",
+	 "0 dB", "0 dB", "0 dB", "0 dB", "undefined", }, //flat
+	{"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "18 dB",
+	 "18 dB", "18 dB", "18 dB", "18 dB", "undefined",}, // min
+	{"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "18 dB",
+	 "18 dB", "18 dB", "18 dB", "18 dB", "undefined",}, // min
+	{"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "20 dB",
+	 "22 dB", "24 dB", "24 dB", "24 dB", "undefined",}, // max
+};
+
+enum uda1341_mixer {
+	DOUBLE,
+	LINE,
+	MIC,
+	MIXER,
+};
+
+const char *mixer_names[] = {
+	"double differential",
+	"input channel 1 (line in)",
+	"input channel 2 (microphone)",
+	"digital mixer",
+};
+
+enum uda1341_deemp {
+	NONE,
+	D32,
+	D44,
+	D48,
+};
+
+const char *deemp_names[] = {
+	"none",
+	"32 kHz",
+	"44.1 kHz",
+	"48 kHz",        
+};
+
+const char *mic_sens_value[] = {
+	"-3 dB", "0 dB", "3 dB", "9 dB", "15 dB", "21 dB", "27 dB", "not used",
+};
+
+const unsigned short AGC_atime[] = {
+	11, 16, 11, 16, 21, 11, 16, 21,
+};
+
+const unsigned short AGC_dtime[] = {
+	100, 100, 200, 200, 200, 400, 400, 400,
+};
+
+const char *AGC_level[] = {
+	"-9.0", "-11.5", "-15.0", "-17.5",
+};
+
+const char *ig_small_value[] = {
+	"-3.0", "-2.5", "-2.0", "-1.5", "-1.0", "-0.5",
+};
+
+/*
+ * this was computed as peak_value[i] = pow((63-i)*1.42,1.013)
+ *
+ * UDA1341 datasheet on page 21: Peak value (dB) = (Peak level - 63.5)*5*log2
+ * There is an table with these values [level]=value: [3]=-90.31, [7]=-84.29
+ * [61]=-2.78, [62] = -1.48, [63] = 0.0
+ * I tried to compute it, but using but even using logarithm with base either 10 or 2
+ * i was'n able to get values in the table from the formula. So I constructed another
+ * formula (see above) to interpolate the values as good as possible. If there is some
+ * mistake, please contact me on tomas.kasparek@seznam.cz. Thanks.
+ * UDA1341TS datasheet is available at:
+ *   http://www-us9.semiconductors.com/acrobat/datasheets/UDA1341TS_3.pdf 
+ */
+const char *peak_value[] = {
+	"-INF dB", "N.A.", "N.A", "90.31 dB", "N.A.", "N.A.", "N.A.", "-84.29 dB",
+	"-82.65 dB", "-81.13 dB", "-79.61 dB", "-78.09 dB", "-76.57 dB", "-75.05 dB", "-73.53 dB",
+	"-72.01 dB", "-70.49 dB", "-68.97 dB", "-67.45 dB", "-65.93 dB", "-64.41 dB", "-62.90 dB",
+	"-61.38 dB", "-59.86 dB", "-58.35 dB", "-56.83 dB", "-55.32 dB", "-53.80 dB", "-52.29 dB",
+	"-50.78 dB", "-49.26 dB", "-47.75 dB", "-46.24 dB", "-44.73 dB", "-43.22 dB", "-41.71 dB",
+	"-40.20 dB", "-38.69 dB", "-37.19 dB", "-35.68 dB", "-34.17 dB", "-32.67 dB", "-31.17 dB",
+	"-29.66 dB", "-28.16 dB", "-26.66 dB", "-25.16 dB", "-23.66 dB", "-22.16 dB", "-20.67 dB",
+	"-19.17 dB", "-17.68 dB", "-16.19 dB", "-14.70 dB", "-13.21 dB", "-11.72 dB", "-10.24 dB",
+	"-8.76 dB", "-7.28 dB", "-5.81 dB", "-4.34 dB", "-2.88 dB", "-1.43 dB", "0.00 dB",
+};
+
+enum uda1341_config {
+	CMD_READ_REG = 0,
+	CMD_RESET,
+	CMD_FS,
+	CMD_FORMAT,
+	CMD_OGAIN,
+	CMD_IGAIN,
+	CMD_DAC,
+	CMD_ADC,
+	CMD_VOLUME,
+	CMD_BASS,
+	CMD_TREBBLE,
+	CMD_PEAK,
+	CMD_DEEMP,
+	CMD_MUTE,        
+	CMD_FILTER,
+	CMD_CH1,
+	CMD_CH2,
+	CMD_MIC,       
+	CMD_MIXER,
+	CMD_AGC,
+	CMD_IG,
+	CMD_AGC_TIME,
+	CMD_AGC_LEVEL,
+#ifdef CONFIG_PM
+	CMD_SUSPEND,
+	CMD_RESUME,
+#endif
+	CMD_LAST,
+};
+
+enum write_through {
+	//used in update_bits (write_cfg) to avoid l3_write - just update local copy of regs.
+	REGS_ONLY=0,
+	//update local regs and write value to uda1341 - do l3_write
+	FLUSH,
+};
+
+int __init snd_chip_uda1341_mixer_new(snd_card_t *card, struct l3_client **clnt);
+
+/*
+ * Local variables:
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/include/sound/util_mem.h b/include/sound/util_mem.h
new file mode 100644
index 000000000000..9d2cdfa0c42a
--- /dev/null
+++ b/include/sound/util_mem.h
@@ -0,0 +1,64 @@
+#ifndef __SOUND_UTIL_MEM_H
+#define __SOUND_UTIL_MEM_H
+/*
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *  Generic memory management routines for soundcard memory allocation
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+typedef struct snd_util_memblk snd_util_memblk_t;
+typedef struct snd_util_memhdr snd_util_memhdr_t;
+typedef unsigned int snd_util_unit_t;
+
+/*
+ * memory block
+ */
+struct snd_util_memblk {
+	snd_util_unit_t size;		/* size of this block */
+	snd_util_unit_t offset;		/* zero-offset of this block */
+	struct list_head list;		/* link */
+};
+
+#define snd_util_memblk_argptr(blk)	(void*)((char*)(blk) + sizeof(snd_util_memblk_t))
+
+/*
+ * memory management information
+ */
+struct snd_util_memhdr {
+	snd_util_unit_t size;		/* size of whole data */
+	struct list_head block;		/* block linked-list header */
+	int nblocks;			/* # of allocated blocks */
+	snd_util_unit_t used;		/* used memory size */
+	int block_extra_size;		/* extra data size of chunk */
+	struct semaphore block_mutex;	/* lock */
+};
+
+/*
+ * prototypes
+ */
+snd_util_memhdr_t *snd_util_memhdr_new(int memsize);
+void snd_util_memhdr_free(snd_util_memhdr_t *hdr);
+snd_util_memblk_t *snd_util_mem_alloc(snd_util_memhdr_t *hdr, int size);
+int snd_util_mem_free(snd_util_memhdr_t *hdr, snd_util_memblk_t *blk);
+int snd_util_mem_avail(snd_util_memhdr_t *hdr);
+
+/* functions without mutex */
+snd_util_memblk_t *__snd_util_mem_alloc(snd_util_memhdr_t *hdr, int size);
+void __snd_util_mem_free(snd_util_memhdr_t *hdr, snd_util_memblk_t *blk);
+snd_util_memblk_t *__snd_util_memblk_new(snd_util_memhdr_t *hdr, snd_util_unit_t units, struct list_head *prev);
+
+#endif /* __SOUND_UTIL_MEM_H */
diff --git a/include/sound/version.h b/include/sound/version.h
new file mode 100644
index 000000000000..98b4230778ed
--- /dev/null
+++ b/include/sound/version.h
@@ -0,0 +1,3 @@
+/* include/version.h.  Generated by configure.  */
+#define CONFIG_SND_VERSION "1.0.9rc2"
+#define CONFIG_SND_DATE "  (Thu Mar 24 10:33:39 2005 UTC)"
diff --git a/include/sound/vx_core.h b/include/sound/vx_core.h
new file mode 100644
index 000000000000..a7e29933f2d0
--- /dev/null
+++ b/include/sound/vx_core.h
@@ -0,0 +1,562 @@
+/*
+ * Driver for Digigram VX soundcards
+ *
+ * Hardware core part
+ *
+ * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __SOUND_VX_COMMON_H
+#define __SOUND_VX_COMMON_H
+
+#include <sound/pcm.h>
+#include <sound/hwdep.h>
+#include <linux/interrupt.h>
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+#if !defined(CONFIG_USE_VXLOADER) && !defined(CONFIG_SND_VX_LIB) /* built-in kernel */
+#define SND_VX_FW_LOADER	/* use the standard firmware loader */
+#endif
+#endif
+
+struct firmware;
+struct device;
+
+typedef struct snd_vx_core vx_core_t;
+typedef struct vx_pipe vx_pipe_t;
+
+#define VX_DRIVER_VERSION	0x010000	/* 1.0.0 */
+
+/*
+ */
+#define SIZE_MAX_CMD    0x10
+#define SIZE_MAX_STATUS 0x10
+
+struct vx_rmh {
+	u16	LgCmd;		/* length of the command to send (WORDs) */
+	u16	LgStat;		/* length of the status received (WORDs) */
+	u32	Cmd[SIZE_MAX_CMD];
+	u32	Stat[SIZE_MAX_STATUS];
+	u16	DspStat;	/* status type, RMP_SSIZE_XXX */
+};
+	
+typedef u64 pcx_time_t;
+
+#define VX_MAX_PIPES	16
+#define VX_MAX_PERIODS	32
+#define VX_MAX_CODECS	2
+
+struct vx_ibl_info {
+	int size;	/* the current IBL size (0 = query) in bytes */
+	int max_size;	/* max. IBL size in bytes */
+	int min_size;	/* min. IBL size in bytes */
+	int granularity;	/* granularity */
+};
+
+struct vx_pipe {
+	int number;
+	unsigned int is_capture: 1;
+	unsigned int data_mode: 1;
+	unsigned int running: 1;
+	unsigned int prepared: 1;
+	int channels;
+	unsigned int differed_type;
+	pcx_time_t pcx_time;
+	snd_pcm_substream_t *substream;
+
+	int hbuf_size;		/* H-buffer size in bytes */
+	int buffer_bytes;	/* the ALSA pcm buffer size in bytes */
+	int period_bytes;	/* the ALSA pcm period size in bytes */
+	int hw_ptr;		/* the current hardware pointer in bytes */
+	int position;		/* the current position in frames (playback only) */
+	int transferred;	/* the transferred size (per period) in frames */
+	int align;		/* size of alignment */
+	u64 cur_count;		/* current sample position (for playback) */
+
+	unsigned int references;     /* an output pipe may be used for monitoring and/or playback */
+	vx_pipe_t *monitoring_pipe;  /* pointer to the monitoring pipe (capture pipe only)*/
+
+	struct tasklet_struct start_tq;
+};
+
+struct snd_vx_ops {
+	/* low-level i/o */
+	unsigned char (*in8)(vx_core_t *chip, int reg);
+	unsigned int (*in32)(vx_core_t *chip, int reg);
+	void (*out8)(vx_core_t *chip, int reg, unsigned char val);
+	void (*out32)(vx_core_t *chip, int reg, unsigned int val);
+	/* irq */
+	int (*test_and_ack)(vx_core_t *chip);
+	void (*validate_irq)(vx_core_t *chip, int enable);
+	/* codec */
+	void (*write_codec)(vx_core_t *chip, int codec, unsigned int data);
+	void (*akm_write)(vx_core_t *chip, int reg, unsigned int data);
+	void (*reset_codec)(vx_core_t *chip);
+	void (*change_audio_source)(vx_core_t *chip, int src);
+	void (*set_clock_source)(vx_core_t *chp, int src);
+	/* chip init */
+	int (*load_dsp)(vx_core_t *chip, int idx, const struct firmware *fw);
+	void (*reset_dsp)(vx_core_t *chip);
+	void (*reset_board)(vx_core_t *chip, int cold_reset);
+	int (*add_controls)(vx_core_t *chip);
+	/* pcm */
+	void (*dma_write)(vx_core_t *chip, snd_pcm_runtime_t *runtime,
+			  vx_pipe_t *pipe, int count);
+	void (*dma_read)(vx_core_t *chip, snd_pcm_runtime_t *runtime,
+			  vx_pipe_t *pipe, int count);
+};
+
+struct snd_vx_hardware {
+	const char *name;
+	int type;	/* VX_TYPE_XXX */
+
+	/* hardware specs */
+	unsigned int num_codecs;
+	unsigned int num_ins;
+	unsigned int num_outs;
+	unsigned int output_level_max;
+};
+
+/* hwdep id string */
+#define SND_VX_HWDEP_ID		"VX Loader"
+
+/* hardware type */
+enum {
+	/* VX222 PCI */
+	VX_TYPE_BOARD,		/* old VX222 PCI */
+	VX_TYPE_V2,		/* VX222 V2 PCI */
+	VX_TYPE_MIC,		/* VX222 Mic PCI */
+	/* VX-pocket */
+	VX_TYPE_VXPOCKET,	/* VXpocket V2 */
+	VX_TYPE_VXP440,		/* VXpocket 440 */
+	VX_TYPE_NUMS
+};
+
+/* chip status */
+enum {
+	VX_STAT_XILINX_LOADED	= (1 << 0),	/* devices are registered */
+	VX_STAT_DEVICE_INIT	= (1 << 1),	/* devices are registered */
+	VX_STAT_CHIP_INIT	= (1 << 2),	/* all operational */
+	VX_STAT_IN_SUSPEND	= (1 << 10),	/* in suspend phase */
+	VX_STAT_IS_STALE	= (1 << 15)	/* device is stale */
+};
+
+/* min/max values for analog output for old codecs */
+#define VX_ANALOG_OUT_LEVEL_MAX		0xe3
+
+struct snd_vx_core {
+	/* ALSA stuff */
+	snd_card_t *card;
+	snd_pcm_t *pcm[VX_MAX_CODECS];
+	int type;	/* VX_TYPE_XXX */
+
+	int irq;
+	/* ports are defined externally */
+
+	/* low-level functions */
+	struct snd_vx_hardware *hw;
+	struct snd_vx_ops *ops;
+
+	spinlock_t lock;
+	spinlock_t irq_lock;
+	struct tasklet_struct tq;
+
+	unsigned int chip_status;
+	unsigned int pcm_running;
+
+	struct device *dev;
+	snd_hwdep_t *hwdep;
+
+	struct vx_rmh irq_rmh;	/* RMH used in interrupts */
+
+	unsigned int audio_info; /* see VX_AUDIO_INFO */
+	unsigned int audio_ins;
+	unsigned int audio_outs;
+	struct vx_pipe **playback_pipes;
+	struct vx_pipe **capture_pipes;
+
+	/* clock and audio sources */
+	unsigned int audio_source;	/* current audio input source */
+	unsigned int audio_source_target;
+	unsigned int clock_mode;	/* clock mode (VX_CLOCK_MODE_XXX) */
+	unsigned int clock_source;	/* current clock source (INTERNAL_QUARTZ or UER_SYNC) */
+	unsigned int freq;		/* current frequency */
+	unsigned int freq_detected;	/* detected frequency from digital in */
+	unsigned int uer_detected;	/* VX_UER_MODE_XXX */
+	unsigned int uer_bits;	/* IEC958 status bits */
+	struct vx_ibl_info ibl;	/* IBL information */
+
+	/* mixer setting */
+	int output_level[VX_MAX_CODECS][2];	/* analog output level */
+	int audio_gain[2][4];			/* digital audio level (playback/capture) */
+	unsigned char audio_active[4];		/* mute/unmute on digital playback */
+	int audio_monitor[4];			/* playback hw-monitor level */
+	unsigned char audio_monitor_active[4];	/* playback hw-monitor mute/unmute */
+
+	struct semaphore mixer_mutex;
+
+	const struct firmware *firmware[4]; /* loaded firmware data */
+};
+
+
+/*
+ * constructor
+ */
+vx_core_t *snd_vx_create(snd_card_t *card, struct snd_vx_hardware *hw,
+			 struct snd_vx_ops *ops, int extra_size);
+int snd_vx_setup_firmware(vx_core_t *chip);
+int snd_vx_load_boot_image(vx_core_t *chip, const struct firmware *dsp);
+int snd_vx_dsp_boot(vx_core_t *chip, const struct firmware *dsp);
+int snd_vx_dsp_load(vx_core_t *chip, const struct firmware *dsp);
+
+void snd_vx_free_firmware(vx_core_t *chip);
+
+/*
+ * interrupt handler; exported for pcmcia
+ */
+irqreturn_t snd_vx_irq_handler(int irq, void *dev, struct pt_regs *regs);
+
+/*
+ * lowlevel functions
+ */
+inline static int vx_test_and_ack(vx_core_t *chip)
+{
+	snd_assert(chip->ops->test_and_ack, return -ENXIO);
+	return chip->ops->test_and_ack(chip);
+}
+
+inline static void vx_validate_irq(vx_core_t *chip, int enable)
+{
+	snd_assert(chip->ops->validate_irq, return);
+	chip->ops->validate_irq(chip, enable);
+}
+
+inline static unsigned char snd_vx_inb(vx_core_t *chip, int reg)
+{
+	snd_assert(chip->ops->in8, return 0);
+	return chip->ops->in8(chip, reg);
+}
+
+inline static unsigned int snd_vx_inl(vx_core_t *chip, int reg)
+{
+	snd_assert(chip->ops->in32, return 0);
+	return chip->ops->in32(chip, reg);
+}
+
+inline static void snd_vx_outb(vx_core_t *chip, int reg, unsigned char val)
+{
+	snd_assert(chip->ops->out8, return);
+	chip->ops->out8(chip, reg, val);
+}
+
+inline static void snd_vx_outl(vx_core_t *chip, int reg, unsigned int val)
+{
+	snd_assert(chip->ops->out32, return);
+	chip->ops->out32(chip, reg, val);
+}
+
+#define vx_inb(chip,reg)	snd_vx_inb(chip, VX_##reg)
+#define vx_outb(chip,reg,val)	snd_vx_outb(chip, VX_##reg,val)
+#define vx_inl(chip,reg)	snd_vx_inl(chip, VX_##reg)
+#define vx_outl(chip,reg,val)	snd_vx_outl(chip, VX_##reg,val)
+
+void snd_vx_delay(vx_core_t *chip, int msec);
+
+static inline void vx_reset_dsp(vx_core_t *chip)
+{
+	snd_assert(chip->ops->reset_dsp, return);
+	chip->ops->reset_dsp(chip);
+}
+
+int vx_send_msg(vx_core_t *chip, struct vx_rmh *rmh);
+int vx_send_msg_nolock(vx_core_t *chip, struct vx_rmh *rmh);
+int vx_send_rih(vx_core_t *chip, int cmd);
+int vx_send_rih_nolock(vx_core_t *chip, int cmd);
+
+void vx_reset_codec(vx_core_t *chip, int cold_reset);
+
+/*
+ * check the bit on the specified register
+ * returns zero if a bit matches, or a negative error code.
+ * exported for vxpocket driver
+ */
+int snd_vx_check_reg_bit(vx_core_t *chip, int reg, int mask, int bit, int time);
+#define vx_check_isr(chip,mask,bit,time) snd_vx_check_reg_bit(chip, VX_ISR, mask, bit, time)
+#define vx_wait_isr_bit(chip,bit) vx_check_isr(chip, bit, bit, 200)
+#define vx_wait_for_rx_full(chip) vx_wait_isr_bit(chip, ISR_RX_FULL)
+
+
+/*
+ * pseudo-DMA transfer
+ */
+inline static void vx_pseudo_dma_write(vx_core_t *chip, snd_pcm_runtime_t *runtime,
+				       vx_pipe_t *pipe, int count)
+{
+	snd_assert(chip->ops->dma_write, return);
+	chip->ops->dma_write(chip, runtime, pipe, count);
+}
+
+inline static void vx_pseudo_dma_read(vx_core_t *chip, snd_pcm_runtime_t *runtime,
+				      vx_pipe_t *pipe, int count)
+{
+	snd_assert(chip->ops->dma_read, return);
+	chip->ops->dma_read(chip, runtime, pipe, count);
+}
+
+
+
+/* error with hardware code,
+ * the return value is -(VX_ERR_MASK | actual-hw-error-code)
+ */
+#define VX_ERR_MASK	0x1000000
+#define vx_get_error(err)	(-(err) & ~VX_ERR_MASK)
+
+
+/*
+ * pcm stuff
+ */
+int snd_vx_pcm_new(vx_core_t *chip);
+void vx_pcm_update_intr(vx_core_t *chip, unsigned int events);
+
+/*
+ * mixer stuff
+ */
+int snd_vx_mixer_new(vx_core_t *chip);
+void vx_toggle_dac_mute(vx_core_t *chip, int mute);
+int vx_sync_audio_source(vx_core_t *chip);
+int vx_set_monitor_level(vx_core_t *chip, int audio, int level, int active);
+
+/*
+ * IEC958 & clock stuff
+ */
+void vx_set_iec958_status(vx_core_t *chip, unsigned int bits);
+int vx_set_clock(vx_core_t *chip, unsigned int freq);
+void vx_set_internal_clock(vx_core_t *chip, unsigned int freq);
+int vx_change_frequency(vx_core_t *chip);
+
+
+/*
+ * hardware constants
+ */
+
+#define vx_has_new_dsp(chip)	((chip)->type != VX_TYPE_BOARD)
+#define vx_is_pcmcia(chip)	((chip)->type >= VX_TYPE_VXPOCKET)
+
+/* audio input source */
+enum {
+	VX_AUDIO_SRC_DIGITAL,
+	VX_AUDIO_SRC_LINE,
+	VX_AUDIO_SRC_MIC
+};
+
+/* clock source */
+enum {
+	INTERNAL_QUARTZ,
+	UER_SYNC
+};
+
+/* clock mode */
+enum {
+	VX_CLOCK_MODE_AUTO,	/* depending on the current audio source */
+	VX_CLOCK_MODE_INTERNAL,	/* fixed to internal quartz */
+	VX_CLOCK_MODE_EXTERNAL	/* fixed to UER sync */
+};
+
+/* SPDIF/UER type */
+enum {
+	VX_UER_MODE_CONSUMER,
+	VX_UER_MODE_PROFESSIONAL,
+	VX_UER_MODE_NOT_PRESENT,
+};
+
+/* register indices */
+enum {
+	VX_ICR,
+	VX_CVR,
+	VX_ISR,
+	VX_IVR,
+	VX_RXH,
+	VX_TXH = VX_RXH,
+	VX_RXM,
+	VX_TXM = VX_RXM,
+	VX_RXL,
+	VX_TXL = VX_RXL,
+	VX_DMA,
+	VX_CDSP,
+	VX_RFREQ,
+	VX_RUER_V2,
+	VX_GAIN,
+	VX_DATA = VX_GAIN,
+	VX_MEMIRQ,
+	VX_ACQ,
+	VX_BIT0,
+	VX_BIT1,
+	VX_MIC0,
+	VX_MIC1,
+	VX_MIC2,
+	VX_MIC3,
+	VX_PLX0,
+	VX_PLX1,
+	VX_PLX2,
+
+	VX_LOFREQ,  // V2: ACQ, VP: RFREQ
+	VX_HIFREQ,  // V2: BIT0, VP: RUER_V2
+	VX_CSUER,   // V2: BIT1, VP: BIT0
+	VX_RUER,    // V2: RUER_V2, VP: BIT1
+
+	VX_REG_MAX,
+
+	/* aliases for VX board */
+	VX_RESET_DMA = VX_ISR,
+	VX_CFG = VX_RFREQ,
+	VX_STATUS = VX_MEMIRQ,
+	VX_SELMIC = VX_MIC0,
+	VX_COMPOT = VX_MIC1,
+	VX_SCOMPR = VX_MIC2,
+	VX_GLIMIT = VX_MIC3,
+	VX_INTCSR = VX_PLX0,
+	VX_CNTRL = VX_PLX1,
+	VX_GPIOC = VX_PLX2,
+
+	/* aliases for VXPOCKET board */
+	VX_MICRO = VX_MEMIRQ,
+	VX_CODEC2 = VX_MEMIRQ,
+	VX_DIALOG = VX_ACQ,
+
+};
+
+/* RMH status type */
+enum {
+	RMH_SSIZE_FIXED = 0,	/* status size given by the driver (in LgStat) */
+	RMH_SSIZE_ARG = 1,	/* status size given in the LSB byte */
+	RMH_SSIZE_MASK = 2,	/* status size given in bitmask */
+};
+
+
+/* bits for ICR register */
+#define ICR_HF1		0x10
+#define ICR_HF0		0x08
+#define ICR_TREQ	0x02	/* Interrupt mode + HREQ set on for transfer (->DSP) request */
+#define ICR_RREQ	0x01	/* Interrupt mode + RREQ set on for transfer (->PC) request */
+
+/* bits for CVR register */
+#define CVR_HC		0x80
+
+/* bits for ISR register */
+#define ISR_HF3		0x10
+#define ISR_HF2		0x08
+#define ISR_CHK		0x10
+#define ISR_ERR		0x08
+#define ISR_TX_READY	0x04
+#define ISR_TX_EMPTY	0x02
+#define ISR_RX_FULL	0x01
+
+/* Constants used to access the DATA register */
+#define VX_DATA_CODEC_MASK	0x80
+#define VX_DATA_XICOR_MASK	0x80
+
+/* Constants used to access the CSUER register (both for VX2 and VXP) */
+#define VX_SUER_FREQ_MASK		0x0c
+#define VX_SUER_FREQ_32KHz_MASK		0x0c
+#define VX_SUER_FREQ_44KHz_MASK		0x00
+#define VX_SUER_FREQ_48KHz_MASK		0x04
+#define VX_SUER_DATA_PRESENT_MASK	0x02
+#define VX_SUER_CLOCK_PRESENT_MASK	0x01
+
+#define VX_CUER_HH_BITC_SEL_MASK	0x08
+#define VX_CUER_MH_BITC_SEL_MASK	0x04
+#define VX_CUER_ML_BITC_SEL_MASK	0x02
+#define VX_CUER_LL_BITC_SEL_MASK	0x01
+
+#define XX_UER_CBITS_OFFSET_MASK	0x1f
+
+
+/* bits for audio_info */
+#define VX_AUDIO_INFO_REAL_TIME	(1<<0)	/* real-time processing available */
+#define VX_AUDIO_INFO_OFFLINE	(1<<1)	/* offline processing available */
+#define VX_AUDIO_INFO_MPEG1	(1<<5)
+#define VX_AUDIO_INFO_MPEG2	(1<<6)
+#define VX_AUDIO_INFO_LINEAR_8	(1<<7)
+#define VX_AUDIO_INFO_LINEAR_16	(1<<8)
+#define VX_AUDIO_INFO_LINEAR_24	(1<<9)
+
+/* DSP Interrupt Request values */
+#define VXP_IRQ_OFFSET		0x40 /* add 0x40 offset for vxpocket and vx222/v2 */
+/* call with vx_send_irq_dsp() */
+#define IRQ_MESS_WRITE_END          0x30
+#define IRQ_MESS_WRITE_NEXT         0x32
+#define IRQ_MESS_READ_NEXT          0x34
+#define IRQ_MESS_READ_END           0x36
+#define IRQ_MESSAGE                 0x38
+#define IRQ_RESET_CHK               0x3A
+#define IRQ_CONNECT_STREAM_NEXT     0x26
+#define IRQ_CONNECT_STREAM_END      0x28
+#define IRQ_PAUSE_START_CONNECT     0x2A
+#define IRQ_END_CONNECTION          0x2C
+
+/* Is there async. events pending ( IT Source Test ) */
+#define ASYNC_EVENTS_PENDING            0x008000
+#define HBUFFER_EVENTS_PENDING          0x004000   // Not always accurate
+#define NOTIF_EVENTS_PENDING            0x002000
+#define TIME_CODE_EVENT_PENDING         0x001000
+#define FREQUENCY_CHANGE_EVENT_PENDING  0x000800
+#define END_OF_BUFFER_EVENTS_PENDING    0x000400
+#define FATAL_DSP_ERROR                 0xff0000
+
+/* Stream Format Header Defines */ 
+#define HEADER_FMT_BASE			0xFED00000
+#define HEADER_FMT_MONO			0x000000C0
+#define HEADER_FMT_INTEL		0x00008000
+#define HEADER_FMT_16BITS		0x00002000
+#define HEADER_FMT_24BITS		0x00004000
+#define HEADER_FMT_UPTO11		0x00000200	/* frequency is less or equ. to 11k.*/
+#define HEADER_FMT_UPTO32		0x00000100	/* frequency is over 11k and less then 32k.*/
+
+/* Constants used to access the Codec */
+#define XX_CODEC_SELECTOR               0x20
+/* codec commands */
+#define XX_CODEC_ADC_CONTROL_REGISTER   0x01
+#define XX_CODEC_DAC_CONTROL_REGISTER   0x02
+#define XX_CODEC_LEVEL_LEFT_REGISTER    0x03
+#define XX_CODEC_LEVEL_RIGHT_REGISTER   0x04
+#define XX_CODEC_PORT_MODE_REGISTER     0x05
+#define XX_CODEC_STATUS_REPORT_REGISTER 0x06
+#define XX_CODEC_CLOCK_CONTROL_REGISTER 0x07
+
+/*
+ * Audio-level control values
+ */
+#define CVAL_M110DB		0x000	/* -110dB */
+#define CVAL_M99DB		0x02C
+#define CVAL_M21DB		0x163
+#define CVAL_M18DB		0x16F
+#define CVAL_M10DB		0x18F
+#define CVAL_0DB		0x1B7
+#define CVAL_18DB		0x1FF	/* +18dB */
+#define CVAL_MAX		0x1FF
+
+#define AUDIO_IO_HAS_MUTE_LEVEL			0x400000
+#define AUDIO_IO_HAS_MUTE_MONITORING_1		0x200000
+#define AUDIO_IO_HAS_MUTE_MONITORING_2		0x100000
+#define VALID_AUDIO_IO_DIGITAL_LEVEL		0x01
+#define VALID_AUDIO_IO_MONITORING_LEVEL		0x02
+#define VALID_AUDIO_IO_MUTE_LEVEL		0x04
+#define VALID_AUDIO_IO_MUTE_MONITORING_1	0x08
+#define VALID_AUDIO_IO_MUTE_MONITORING_2	0x10
+
+
+#endif /* __SOUND_VX_COMMON_H */
diff --git a/include/sound/wavefront.h b/include/sound/wavefront.h
new file mode 100644
index 000000000000..9e572aed2435
--- /dev/null
+++ b/include/sound/wavefront.h
@@ -0,0 +1,695 @@
+#ifndef __SOUND_WAVEFRONT_H__
+#define __SOUND_WAVEFRONT_H__
+
+/*
+ *  Driver for Turtle Beach Wavefront cards (Maui,Tropez,Tropez+)
+ *
+ *  Copyright (c) by Paul Barton-Davis <pbd@op.net>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#if (!defined(__GNUC__) && !defined(__GNUG__))
+
+     You will not be able to compile this file correctly without gcc, because
+     it is necessary to pack the "wavefront_alias" structure to a size
+     of 22 bytes, corresponding to 16-bit alignment (as would have been
+     the case on the original platform, MS-DOS). If this is not done,
+     then WavePatch-format files cannot be read/written correctly.
+     The method used to do this here ("__attribute__((packed)") is
+     completely compiler dependent.
+     
+     All other wavefront_* types end up aligned to 32 bit values and
+     still have the same (correct) size.
+
+#else
+
+     /* However, note that as of G++ 2.7.3.2, g++ was unable to
+	correctly parse *type* __attribute__ tags. It will do the
+	right thing if we use the "packed" attribute on each struct
+	member, which has the same semantics anyway. 
+     */
+
+#endif /* __GNUC__ */
+
+/***************************** WARNING ********************************
+  PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO 
+  BE USED WITH EITHER C *OR* C++.
+ **********************************************************************/
+
+#ifndef NUM_MIDIKEYS 
+#define NUM_MIDIKEYS 128
+#endif  /* NUM_MIDIKEYS */
+
+#ifndef NUM_MIDICHANNELS
+#define NUM_MIDICHANNELS 16
+#endif  /* NUM_MIDICHANNELS */
+
+/* These are very useful/important. the original wavefront interface
+   was developed on a 16 bit system, where sizeof(int) = 2
+   bytes. Defining things like this makes the code much more portable, and
+   easier to understand without having to toggle back and forth
+   between a 16-bit view of the world and a 32-bit one. 
+ */   
+
+#ifndef __KERNEL__
+/* keep them for compatibility */
+typedef short s16;
+typedef unsigned short u16;
+typedef int s32;
+typedef unsigned int u32;
+typedef char s8;
+typedef unsigned char u8;
+typedef s16 INT16;
+typedef u16 UINT16;
+typedef s32 INT32;
+typedef u32 UINT32;
+typedef s8 CHAR8;
+typedef u8 UCHAR8;
+#endif
+
+/* Pseudo-commands not part of the WaveFront command set.
+   These are used for various driver controls and direct
+   hardware control.
+ */
+
+#define WFC_DEBUG_DRIVER                0
+#define WFC_FX_IOCTL                    1
+#define WFC_PATCH_STATUS                2
+#define WFC_PROGRAM_STATUS              3
+#define WFC_SAMPLE_STATUS               4
+#define WFC_DISABLE_INTERRUPTS          5
+#define WFC_ENABLE_INTERRUPTS           6
+#define WFC_INTERRUPT_STATUS            7
+#define WFC_ROMSAMPLES_RDONLY           8
+#define WFC_IDENTIFY_SLOT_TYPE          9
+
+/* Wavefront synth commands
+ */
+
+#define WFC_DOWNLOAD_SAMPLE		0x80
+#define WFC_DOWNLOAD_BLOCK		0x81
+#define WFC_DOWNLOAD_MULTISAMPLE	0x82
+#define WFC_DOWNLOAD_SAMPLE_ALIAS	0x83
+#define WFC_DELETE_SAMPLE		0x84
+#define WFC_REPORT_FREE_MEMORY		0x85
+#define WFC_DOWNLOAD_PATCH		0x86
+#define WFC_DOWNLOAD_PROGRAM		0x87
+#define WFC_SET_SYNTHVOL		0x89
+#define WFC_SET_NVOICES			0x8B
+#define WFC_DOWNLOAD_DRUM		0x90
+#define WFC_GET_SYNTHVOL		0x92
+#define WFC_GET_NVOICES			0x94
+#define WFC_DISABLE_CHANNEL		0x9A
+#define WFC_ENABLE_CHANNEL		0x9B
+#define WFC_MISYNTH_OFF			0x9D
+#define WFC_MISYNTH_ON			0x9E
+#define WFC_FIRMWARE_VERSION		0x9F
+#define WFC_GET_NSAMPLES		0xA0
+#define WFC_DISABLE_DRUM_PROGRAM	0xA2
+#define WFC_UPLOAD_PATCH		0xA3
+#define WFC_UPLOAD_PROGRAM		0xA4
+#define WFC_SET_TUNING			0xA6
+#define WFC_GET_TUNING			0xA7
+#define WFC_VMIDI_ON			0xA8
+#define WFC_VMIDI_OFF			0xA9
+#define WFC_MIDI_STATUS			0xAA
+#define WFC_GET_CHANNEL_STATUS		0xAB
+#define WFC_DOWNLOAD_SAMPLE_HEADER	0xAC
+#define WFC_UPLOAD_SAMPLE_HEADER	0xAD
+#define WFC_UPLOAD_MULTISAMPLE		0xAE
+#define WFC_UPLOAD_SAMPLE_ALIAS		0xAF
+#define WFC_IDENTIFY_SAMPLE_TYPE	0xB0
+#define WFC_DOWNLOAD_EDRUM_PROGRAM	0xB1
+#define WFC_UPLOAD_EDRUM_PROGRAM	0xB2
+#define WFC_SET_EDRUM_CHANNEL		0xB3
+#define WFC_INSTOUT_LEVELS		0xB4
+#define WFC_PEAKOUT_LEVELS		0xB5
+#define WFC_REPORT_CHANNEL_PROGRAMS	0xB6
+#define WFC_HARDWARE_VERSION		0xCF
+#define WFC_UPLOAD_SAMPLE_PARAMS	0xD7
+#define WFC_DOWNLOAD_OS			0xF1
+#define WFC_NOOP                        0xFF
+
+#define WF_MAX_SAMPLE   512
+#define WF_MAX_PATCH    256
+#define WF_MAX_PROGRAM  128
+
+#define WF_SECTION_MAX  44   /* longest OS section length */
+
+/* # of bytes we send to the board when sending it various kinds of
+   substantive data, such as samples, patches and programs.
+*/
+
+#define WF_PROGRAM_BYTES 32
+#define WF_PATCH_BYTES 132
+#define WF_SAMPLE_BYTES 27
+#define WF_SAMPLE_HDR_BYTES 25
+#define WF_ALIAS_BYTES 25
+#define WF_DRUM_BYTES 9
+#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */
+
+#define WF_ACK     0x80
+#define WF_DMA_ACK 0x81
+
+/* OR-values for MIDI status bits */
+
+#define WF_MIDI_VIRTUAL_ENABLED 0x1
+#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2
+#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4
+
+/* slot indexes for struct address_info: makes code a little more mnemonic */
+
+#define WF_SYNTH_SLOT         0
+#define WF_INTERNAL_MIDI_SLOT 1
+#define WF_EXTERNAL_MIDI_SLOT 2
+
+/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401
+   emulation. Note these NEVER show up in output from the device and
+   should NEVER be used in input unless Virtual MIDI mode has been 
+   disabled. If they do show up as input, the results are unpredictable.
+*/
+
+#define WF_EXTERNAL_SWITCH  0xFD
+#define WF_INTERNAL_SWITCH  0xF9
+
+/* Debugging flags */
+
+#define WF_DEBUG_CMD 0x1
+#define WF_DEBUG_DATA 0x2
+#define WF_DEBUG_LOAD_PATCH 0x4
+#define WF_DEBUG_IO 0x8
+
+/* WavePatch file format stuff */
+
+#define WF_WAVEPATCH_VERSION     120;  /*  Current version number (1.2)  */
+#define WF_MAX_COMMENT           64    /*  Comment length */
+#define WF_NUM_LAYERS            4
+#define WF_NAME_LENGTH           32
+#define WF_SOURCE_LENGTH         260
+
+#define BankFileID     "Bank"
+#define DrumkitFileID  "DrumKit"
+#define ProgramFileID  "Program"
+
+struct wf_envelope
+{
+    u8 attack_time:7;
+    u8 Unused1:1;
+
+    u8 decay1_time:7;
+    u8 Unused2:1;
+
+    u8 decay2_time:7;
+    u8 Unused3:1;
+
+    u8 sustain_time:7;
+    u8 Unused4:1;
+
+    u8 release_time:7;
+    u8 Unused5:1;
+
+    u8 release2_time:7;
+    u8 Unused6:1;
+
+    s8 attack_level;
+    s8 decay1_level;
+    s8 decay2_level;
+    s8 sustain_level;
+    s8 release_level;
+
+    u8 attack_velocity:7;
+    u8 Unused7:1;
+
+    u8 volume_velocity:7;
+    u8 Unused8:1;
+
+    u8 keyboard_scaling:7;
+    u8 Unused9:1;
+};
+typedef struct wf_envelope wavefront_envelope;
+
+struct wf_lfo
+{
+    u8 sample_number;
+
+    u8 frequency:7;
+    u8 Unused1:1;
+
+    u8 am_src:4;
+    u8 fm_src:4;
+
+    s8 fm_amount;
+    s8 am_amount;
+    s8 start_level;
+    s8 end_level;
+
+    u8 ramp_delay:7;
+    u8 wave_restart:1; /* for LFO2 only */
+
+    u8 ramp_time:7;
+    u8 Unused2:1;
+};
+typedef struct wf_lfo wavefront_lfo;
+
+struct wf_patch
+{
+    s16  frequency_bias;         /*  ** THIS IS IN MOTOROLA FORMAT!! ** */
+
+    u8 amplitude_bias:7;
+    u8 Unused1:1;
+
+    u8 portamento:7;
+    u8 Unused2:1;
+
+    u8 sample_number;
+
+    u8 pitch_bend:4;
+    u8 sample_msb:1;
+    u8 Unused3:3;
+
+    u8 mono:1;
+    u8 retrigger:1;
+    u8 nohold:1;
+    u8 restart:1;
+    u8 filterconfig:2; /* SDK says "not used" */
+    u8 reuse:1;
+    u8 reset_lfo:1;    
+
+    u8 fm_src2:4;
+    u8 fm_src1:4;   
+
+    s8 fm_amount1;
+    s8 fm_amount2;
+
+    u8 am_src:4;
+    u8 Unused4:4;
+
+    s8 am_amount;
+
+    u8 fc1_mode:4;
+    u8 fc2_mode:4;
+
+    s8 fc1_mod_amount;
+    s8 fc1_keyboard_scaling;
+    s8 fc1_bias;
+    s8 fc2_mod_amount;
+    s8 fc2_keyboard_scaling;
+    s8 fc2_bias;
+
+    u8 randomizer:7;
+    u8 Unused5:1;
+
+    struct wf_envelope envelope1;
+    struct wf_envelope envelope2;
+    struct wf_lfo lfo1;
+    struct wf_lfo lfo2;
+};
+typedef struct wf_patch wavefront_patch;
+
+struct wf_layer
+{
+    u8 patch_number;
+
+    u8 mix_level:7;
+    u8 mute:1;
+
+    u8 split_point:7;
+    u8 play_below:1;
+
+    u8 pan_mod_src:2;
+    u8 pan_or_mod:1;
+    u8 pan:4;
+    u8 split_type:1;
+};
+typedef struct wf_layer wavefront_layer;
+
+struct wf_program
+{
+    struct wf_layer layer[WF_NUM_LAYERS];
+};
+typedef struct wf_program wavefront_program;
+
+struct wf_sample_offset
+{
+    s32 Fraction:4;
+    s32 Integer:20;
+    s32 Unused:8;
+};
+typedef struct wf_sample_offset wavefront_sample_offset;          
+     
+/* Sample slot types */
+
+#define WF_ST_SAMPLE      0
+#define WF_ST_MULTISAMPLE 1
+#define WF_ST_ALIAS       2
+#define WF_ST_EMPTY       3
+
+/* pseudo's */
+
+#define WF_ST_DRUM        4
+#define WF_ST_PROGRAM     5
+#define WF_ST_PATCH       6
+#define WF_ST_SAMPLEHDR   7
+
+#define WF_ST_MASK        0xf
+
+/* Flags for slot status. These occupy the upper bits of the same byte
+   as a sample type.
+*/
+
+#define WF_SLOT_USED      0x80   /* XXX don't rely on this being accurate */
+#define WF_SLOT_FILLED    0x40
+#define WF_SLOT_ROM       0x20
+
+#define WF_SLOT_MASK      0xf0
+
+/* channel constants */
+
+#define WF_CH_MONO  0
+#define WF_CH_LEFT  1
+#define WF_CH_RIGHT 2
+
+/* Sample formats */
+
+#define LINEAR_16BIT 0
+#define WHITE_NOISE  1
+#define LINEAR_8BIT  2
+#define MULAW_8BIT   3
+
+#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2)
+
+
+/* 
+
+  Because most/all of the sample data we pass in via pointers has
+  never been copied (just mmap-ed into user space straight from the
+  disk), it would be nice to allow handling of multi-channel sample
+  data without forcing user-level extraction of the relevant bytes.
+  
+  So, we need a way of specifying which channel to use (the WaveFront
+  only handles mono samples in a given slot), and the only way to do
+  this without using some struct other than wavefront_sample as the
+  interface is the awful hack of using the unused bits in a
+  wavefront_sample:
+  
+  Val      Meaning
+  ---      -------
+  0        no channel selection (use channel 1, sample is MONO)
+  1        use first channel, and skip one
+  2        use second channel, and skip one
+  3        use third channel, and skip two
+  4        use fourth channel, skip three
+  5        use fifth channel, skip four
+  6        use six channel, skip five
+
+
+  This can handle up to 4 channels, and anyone downloading >4 channels
+  of sample data just to select one of them needs to find some tools
+  like sox ...
+
+  NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is 
+  important.
+
+*/
+
+#define WF_SET_CHANNEL(samp,chn) \
+ (samp)->Unused1 = chn & 0x1; \
+ (samp)->Unused2 = chn & 0x2; \
+ (samp)->Unused3 = chn & 0x4 
+  
+#define WF_GET_CHANNEL(samp) \
+  (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1)
+  
+typedef struct wf_sample {
+    struct wf_sample_offset sampleStartOffset;
+    struct wf_sample_offset loopStartOffset;
+    struct wf_sample_offset loopEndOffset;
+    struct wf_sample_offset sampleEndOffset;
+    s16 FrequencyBias;
+    u8 SampleResolution:2;  /* sample_format */
+    u8 Unused1:1;
+    u8 Loop:1;
+    u8 Bidirectional:1;
+    u8 Unused2:1;
+    u8 Reverse:1;
+    u8 Unused3:1;
+} wavefront_sample;
+
+typedef struct wf_multisample {
+    s16 NumberOfSamples;   /* log2 of the number of samples */
+    s16 SampleNumber[NUM_MIDIKEYS];
+} wavefront_multisample;
+
+typedef struct wf_alias {
+    s16 OriginalSample __attribute__ ((packed));
+
+    struct wf_sample_offset sampleStartOffset __attribute__ ((packed));
+    struct wf_sample_offset loopStartOffset __attribute__ ((packed));
+    struct wf_sample_offset sampleEndOffset __attribute__ ((packed));
+    struct wf_sample_offset loopEndOffset __attribute__ ((packed));
+
+    s16  FrequencyBias __attribute__ ((packed));
+
+    u8 SampleResolution:2  __attribute__ ((packed));
+    u8 Unused1:1  __attribute__ ((packed));
+    u8 Loop:1 __attribute__ ((packed));
+    u8 Bidirectional:1  __attribute__ ((packed));
+    u8 Unused2:1 __attribute__ ((packed));
+    u8 Reverse:1 __attribute__ ((packed));
+    u8 Unused3:1 __attribute__ ((packed)); 
+    
+    /* This structure is meant to be padded only to 16 bits on their
+       original. Of course, whoever wrote their documentation didn't
+       realize that sizeof(struct) can be >=
+       sum(sizeof(struct-fields)) and so thought that giving a C level
+       description of the structs used in WavePatch files was
+       sufficient. I suppose it was, as long as you remember the 
+       standard 16->32 bit issues.
+    */
+
+    u8 sixteen_bit_padding __attribute__ ((packed));
+} wavefront_alias;
+
+typedef struct wf_drum {
+    u8 PatchNumber;
+    u8 MixLevel:7;
+    u8 Unmute:1;
+    u8 Group:4;
+    u8 Unused1:4;
+    u8 PanModSource:2;
+    u8 PanModulated:1;
+    u8 PanAmount:4;
+    u8 Unused2:1;
+} wavefront_drum;
+
+typedef struct wf_drumkit {
+    struct wf_drum drum[NUM_MIDIKEYS];
+} wavefront_drumkit;
+
+typedef struct wf_channel_programs {
+    u8 Program[NUM_MIDICHANNELS];
+} wavefront_channel_programs;
+
+/* How to get MIDI channel status from the data returned by
+   a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs)
+*/
+
+#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7))
+
+typedef union wf_any {
+    wavefront_sample s;
+    wavefront_multisample ms;
+    wavefront_alias a;
+    wavefront_program pr;
+    wavefront_patch p;
+    wavefront_drum d;
+} wavefront_any;
+
+/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h
+   might work for other wave-table based patch loading situations.
+   Alas, his fears were correct. The WaveFront doesn't even come with
+   just "patches", but several different kind of structures that
+   control the sound generation process.
+ */
+
+typedef struct wf_patch_info {
+    
+    /* the first two fields are used by the OSS "patch loading" interface
+       only, and are unused by the current user-level library.
+    */
+
+    s16   key;               /* Use WAVEFRONT_PATCH here */
+    u16  devno;             /* fill in when sending */
+    u8  subkey;            /* WF_ST_{SAMPLE,ALIAS,etc.} */
+
+#define WAVEFRONT_FIND_FREE_SAMPLE_SLOT 999
+
+    u16  number;            /* patch/sample/prog number */
+
+    u32  size;              /* size of any data included in 
+				  one of the fields in `hdrptr', or
+				  as `dataptr'.
+
+				  NOTE: for actual samples, this is
+				  the size of the *SELECTED CHANNEL*
+				  even if more data is actually available.
+				  
+				  So, a stereo sample (2 channels) of
+				  6000 bytes total has `size' = 3000.
+
+				  See the macros and comments for
+				  WF_{GET,SET}_CHANNEL above.
+
+			       */
+    wavefront_any __user *hdrptr;      /* user-space ptr to hdr bytes */
+    u16 __user *dataptr;            /* actual sample data */
+
+    wavefront_any hdr;          /* kernel-space copy of hdr bytes */         
+} wavefront_patch_info;
+
+/* The maximum number of bytes we will ever move to or from user space
+   in response to a WFC_* command.  This obviously doesn't cover
+   actual sample data.
+*/
+
+#define WF_MAX_READ sizeof(wavefront_multisample)
+#define WF_MAX_WRITE sizeof(wavefront_multisample)
+
+/*
+   This allows us to execute any WF command except the download/upload
+   ones, which are handled differently due to copyin/copyout issues as
+   well as data-nybbling to/from the card.
+ */
+
+typedef struct wavefront_control {
+    int cmd;                           /* WFC_* */
+    char status;                       /* return status to user-space */
+    unsigned char rbuf[WF_MAX_READ];   /* bytes read from card */
+    unsigned char wbuf[WF_MAX_WRITE];  /* bytes written to card */
+} wavefront_control;
+
+#define WFCTL_WFCMD    0x1
+#define WFCTL_LOAD_SPP 0x2
+
+/* Modulator table */
+
+#define WF_MOD_LFO1      0
+#define WF_MOD_LFO2      1
+#define WF_MOD_ENV1      2
+#define WF_MOD_ENV2      3
+#define WF_MOD_KEYBOARD  4
+#define WF_MOD_LOGKEY    5
+#define WF_MOD_VELOCITY  6
+#define WF_MOD_LOGVEL    7
+#define WF_MOD_RANDOM    8
+#define WF_MOD_PRESSURE  9
+#define WF_MOD_MOD_WHEEL 10
+#define WF_MOD_1         WF_MOD_MOD_WHEEL 
+#define WF_MOD_BREATH    11
+#define WF_MOD_2         WF_MOD_BREATH
+#define WF_MOD_FOOT      12
+#define WF_MOD_4         WF_MOD_FOOT
+#define WF_MOD_VOLUME    13
+#define WF_MOD_7         WF_MOD_VOLUME
+#define WF_MOD_PAN       14
+#define WF_MOD_10        WF_MOD_PAN
+#define WF_MOD_EXPR      15
+#define WF_MOD_11        WF_MOD_EXPR
+
+/* FX-related material */
+
+typedef struct wf_fx_info {
+    int request;             /* see list below */
+    long data[4];             /* we don't need much */
+} wavefront_fx_info;
+
+/* support for each of these will be forthcoming once I or someone 
+   else has figured out which of the addresses on page 6 and page 7 of 
+   the YSS225 control each parameter. Incidentally, these come from
+   the Windows driver interface, but again, Turtle Beach didn't
+   document the API to use them.
+*/
+
+#define WFFX_SETOUTGAIN		        0
+#define WFFX_SETSTEREOOUTGAIN		1
+#define WFFX_SETREVERBIN1GAIN		2
+#define WFFX_SETREVERBIN2GAIN		3
+#define WFFX_SETREVERBIN3GAIN		4
+#define WFFX_SETCHORUSINPORT		5
+#define WFFX_SETREVERBIN1PORT		6
+#define WFFX_SETREVERBIN2PORT		7
+#define WFFX_SETREVERBIN3PORT		8
+#define WFFX_SETEFFECTPORT		9
+#define WFFX_SETAUXPORT		        10
+#define WFFX_SETREVERBTYPE		11
+#define WFFX_SETREVERBDELAY		12
+#define WFFX_SETCHORUSLFO		13
+#define WFFX_SETCHORUSPMD		14
+#define WFFX_SETCHORUSAMD		15
+#define WFFX_SETEFFECT		        16
+#define WFFX_SETBASEALL		        17
+#define WFFX_SETREVERBALL		18
+#define WFFX_SETCHORUSALL		20
+#define WFFX_SETREVERBDEF		22
+#define WFFX_SETCHORUSDEF		23
+#define WFFX_DELAYSETINGAIN		24
+#define WFFX_DELAYSETFBGAIN	        25
+#define WFFX_DELAYSETFBLPF		26
+#define WFFX_DELAYSETGAIN		27
+#define WFFX_DELAYSETTIME		28
+#define WFFX_DELAYSETFBTIME		29
+#define WFFX_DELAYSETALL		30
+#define WFFX_DELAYSETDEF		32
+#define WFFX_SDELAYSETINGAIN		33
+#define WFFX_SDELAYSETFBGAIN		34
+#define WFFX_SDELAYSETFBLPF		35
+#define WFFX_SDELAYSETGAIN		36
+#define WFFX_SDELAYSETTIME		37
+#define WFFX_SDELAYSETFBTIME		38
+#define WFFX_SDELAYSETALL		39
+#define WFFX_SDELAYSETDEF		41
+#define WFFX_DEQSETINGAIN		42
+#define WFFX_DEQSETFILTER		43
+#define WFFX_DEQSETALL		        44
+#define WFFX_DEQSETDEF		        46
+#define WFFX_MUTE		        47
+#define WFFX_FLANGESETBALANCE	        48	
+#define WFFX_FLANGESETDELAY		49
+#define WFFX_FLANGESETDWFFX_TH		50
+#define WFFX_FLANGESETFBGAIN		51
+#define WFFX_FLANGESETINGAIN		52
+#define WFFX_FLANGESETLFO		53
+#define WFFX_FLANGESETALL		54
+#define WFFX_FLANGESETDEF		56
+#define WFFX_PITCHSETSHIFT		57
+#define WFFX_PITCHSETBALANCE		58
+#define WFFX_PITCHSETALL		59
+#define WFFX_PITCHSETDEF		61
+#define WFFX_SRSSETINGAIN		62
+#define WFFX_SRSSETSPACE		63
+#define WFFX_SRSSETCENTER		64
+#define WFFX_SRSSETGAIN		        65
+#define WFFX_SRSSETMODE	        	66
+#define WFFX_SRSSETDEF		        68
+
+/* Allow direct user-space control over FX memory/coefficient data.
+   In theory this could be used to download the FX microprogram,
+   but it would be a little slower, and involve some weird code.
+ */
+
+#define WFFX_MEMSET              69
+
+#endif /* __SOUND_WAVEFRONT_H__ */
diff --git a/include/sound/wavefront_fx.h b/include/sound/wavefront_fx.h
new file mode 100644
index 000000000000..cec92b141796
--- /dev/null
+++ b/include/sound/wavefront_fx.h
@@ -0,0 +1,9 @@
+#ifndef __SOUND_WAVEFRONT_FX_H
+#define __SOUND_WAVEFRONT_FX_H
+
+extern int  snd_wavefront_fx_detect (snd_wavefront_t *);
+extern void snd_wavefront_fx_ioctl  (snd_synth_t *sdev, 
+				     unsigned int cmd, 
+				     unsigned long arg);
+
+#endif  __SOUND_WAVEFRONT_FX_H
diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h
new file mode 100644
index 000000000000..4b570684a6aa
--- /dev/null
+++ b/include/sound/ymfpci.h
@@ -0,0 +1,396 @@
+#ifndef __SOUND_YMFPCI_H
+#define __SOUND_YMFPCI_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *  Definitions for Yahama YMF724/740/744/754 chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include "ac97_codec.h"
+#include "timer.h"
+#include <linux/gameport.h>
+
+#ifndef PCI_VENDOR_ID_YAMAHA
+#define PCI_VENDOR_ID_YAMAHA            0x1073
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_724
+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_724F
+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_740
+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_740C
+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_744
+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
+#endif
+#ifndef PCI_DEVICE_ID_YAMAHA_754
+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
+#endif
+
+/*
+ *  Direct registers
+ */
+
+#define YMFREG(chip, reg)		(chip->port + YDSXGR_##reg)
+
+#define	YDSXGR_INTFLAG			0x0004
+#define	YDSXGR_ACTIVITY			0x0006
+#define	YDSXGR_GLOBALCTRL		0x0008
+#define	YDSXGR_ZVCTRL			0x000A
+#define	YDSXGR_TIMERCTRL		0x0010
+#define	YDSXGR_TIMERCOUNT		0x0012
+#define	YDSXGR_SPDIFOUTCTRL		0x0018
+#define	YDSXGR_SPDIFOUTSTATUS		0x001C
+#define	YDSXGR_EEPROMCTRL		0x0020
+#define	YDSXGR_SPDIFINCTRL		0x0034
+#define	YDSXGR_SPDIFINSTATUS		0x0038
+#define	YDSXGR_DSPPROGRAMDL		0x0048
+#define	YDSXGR_DLCNTRL			0x004C
+#define	YDSXGR_GPIOININTFLAG		0x0050
+#define	YDSXGR_GPIOININTENABLE		0x0052
+#define	YDSXGR_GPIOINSTATUS		0x0054
+#define	YDSXGR_GPIOOUTCTRL		0x0056
+#define	YDSXGR_GPIOFUNCENABLE		0x0058
+#define	YDSXGR_GPIOTYPECONFIG		0x005A
+#define	YDSXGR_AC97CMDDATA		0x0060
+#define	YDSXGR_AC97CMDADR		0x0062
+#define	YDSXGR_PRISTATUSDATA		0x0064
+#define	YDSXGR_PRISTATUSADR		0x0066
+#define	YDSXGR_SECSTATUSDATA		0x0068
+#define	YDSXGR_SECSTATUSADR		0x006A
+#define	YDSXGR_SECCONFIG		0x0070
+#define	YDSXGR_LEGACYOUTVOL		0x0080
+#define	YDSXGR_LEGACYOUTVOLL		0x0080
+#define	YDSXGR_LEGACYOUTVOLR		0x0082
+#define	YDSXGR_NATIVEDACOUTVOL		0x0084
+#define	YDSXGR_NATIVEDACOUTVOLL		0x0084
+#define	YDSXGR_NATIVEDACOUTVOLR		0x0086
+#define	YDSXGR_ZVOUTVOL			0x0088
+#define	YDSXGR_ZVOUTVOLL		0x0088
+#define	YDSXGR_ZVOUTVOLR		0x008A
+#define	YDSXGR_SECADCOUTVOL		0x008C
+#define	YDSXGR_SECADCOUTVOLL		0x008C
+#define	YDSXGR_SECADCOUTVOLR		0x008E
+#define	YDSXGR_PRIADCOUTVOL		0x0090
+#define	YDSXGR_PRIADCOUTVOLL		0x0090
+#define	YDSXGR_PRIADCOUTVOLR		0x0092
+#define	YDSXGR_LEGACYLOOPVOL		0x0094
+#define	YDSXGR_LEGACYLOOPVOLL		0x0094
+#define	YDSXGR_LEGACYLOOPVOLR		0x0096
+#define	YDSXGR_NATIVEDACLOOPVOL		0x0098
+#define	YDSXGR_NATIVEDACLOOPVOLL	0x0098
+#define	YDSXGR_NATIVEDACLOOPVOLR	0x009A
+#define	YDSXGR_ZVLOOPVOL		0x009C
+#define	YDSXGR_ZVLOOPVOLL		0x009E
+#define	YDSXGR_ZVLOOPVOLR		0x009E
+#define	YDSXGR_SECADCLOOPVOL		0x00A0
+#define	YDSXGR_SECADCLOOPVOLL		0x00A0
+#define	YDSXGR_SECADCLOOPVOLR		0x00A2
+#define	YDSXGR_PRIADCLOOPVOL		0x00A4
+#define	YDSXGR_PRIADCLOOPVOLL		0x00A4
+#define	YDSXGR_PRIADCLOOPVOLR		0x00A6
+#define	YDSXGR_NATIVEADCINVOL		0x00A8
+#define	YDSXGR_NATIVEADCINVOLL		0x00A8
+#define	YDSXGR_NATIVEADCINVOLR		0x00AA
+#define	YDSXGR_NATIVEDACINVOL		0x00AC
+#define	YDSXGR_NATIVEDACINVOLL		0x00AC
+#define	YDSXGR_NATIVEDACINVOLR		0x00AE
+#define	YDSXGR_BUF441OUTVOL		0x00B0
+#define	YDSXGR_BUF441OUTVOLL		0x00B0
+#define	YDSXGR_BUF441OUTVOLR		0x00B2
+#define	YDSXGR_BUF441LOOPVOL		0x00B4
+#define	YDSXGR_BUF441LOOPVOLL		0x00B4
+#define	YDSXGR_BUF441LOOPVOLR		0x00B6
+#define	YDSXGR_SPDIFOUTVOL		0x00B8
+#define	YDSXGR_SPDIFOUTVOLL		0x00B8
+#define	YDSXGR_SPDIFOUTVOLR		0x00BA
+#define	YDSXGR_SPDIFLOOPVOL		0x00BC
+#define	YDSXGR_SPDIFLOOPVOLL		0x00BC
+#define	YDSXGR_SPDIFLOOPVOLR		0x00BE
+#define	YDSXGR_ADCSLOTSR		0x00C0
+#define	YDSXGR_RECSLOTSR		0x00C4
+#define	YDSXGR_ADCFORMAT		0x00C8
+#define	YDSXGR_RECFORMAT		0x00CC
+#define	YDSXGR_P44SLOTSR		0x00D0
+#define	YDSXGR_STATUS			0x0100
+#define	YDSXGR_CTRLSELECT		0x0104
+#define	YDSXGR_MODE			0x0108
+#define	YDSXGR_SAMPLECOUNT		0x010C
+#define	YDSXGR_NUMOFSAMPLES		0x0110
+#define	YDSXGR_CONFIG			0x0114
+#define	YDSXGR_PLAYCTRLSIZE		0x0140
+#define	YDSXGR_RECCTRLSIZE		0x0144
+#define	YDSXGR_EFFCTRLSIZE		0x0148
+#define	YDSXGR_WORKSIZE			0x014C
+#define	YDSXGR_MAPOFREC			0x0150
+#define	YDSXGR_MAPOFEFFECT		0x0154
+#define	YDSXGR_PLAYCTRLBASE		0x0158
+#define	YDSXGR_RECCTRLBASE		0x015C
+#define	YDSXGR_EFFCTRLBASE		0x0160
+#define	YDSXGR_WORKBASE			0x0164
+#define	YDSXGR_DSPINSTRAM		0x1000
+#define	YDSXGR_CTRLINSTRAM		0x4000
+
+#define YDSXG_AC97READCMD		0x8000
+#define YDSXG_AC97WRITECMD		0x0000
+
+#define PCIR_DSXG_LEGACY		0x40
+#define PCIR_DSXG_ELEGACY		0x42
+#define PCIR_DSXG_CTRL			0x48
+#define PCIR_DSXG_PWRCTRL1		0x4a
+#define PCIR_DSXG_PWRCTRL2		0x4e
+#define PCIR_DSXG_FMBASE		0x60
+#define PCIR_DSXG_SBBASE		0x62
+#define PCIR_DSXG_MPU401BASE		0x64
+#define PCIR_DSXG_JOYBASE		0x66
+
+#define YDSXG_DSPLENGTH			0x0080
+#define YDSXG_CTRLLENGTH		0x3000
+
+#define YDSXG_DEFAULT_WORK_SIZE		0x0400
+
+#define YDSXG_PLAYBACK_VOICES		64
+#define YDSXG_CAPTURE_VOICES		2
+#define YDSXG_EFFECT_VOICES		5
+
+#define YMFPCI_LEGACY_SBEN	(1 << 0)	/* soundblaster enable */
+#define YMFPCI_LEGACY_FMEN	(1 << 1)	/* OPL3 enable */
+#define YMFPCI_LEGACY_JPEN	(1 << 2)	/* joystick enable */
+#define YMFPCI_LEGACY_MEN	(1 << 3)	/* MPU401 enable */
+#define YMFPCI_LEGACY_MIEN	(1 << 4)	/* MPU RX irq enable */
+#define YMFPCI_LEGACY_IOBITS	(1 << 5)	/* i/o bits range, 0 = 16bit, 1 =10bit */
+#define YMFPCI_LEGACY_SDMA	(3 << 6)	/* SB DMA select */
+#define YMFPCI_LEGACY_SBIRQ	(7 << 8)	/* SB IRQ select */
+#define YMFPCI_LEGACY_MPUIRQ	(7 << 11)	/* MPU IRQ select */
+#define YMFPCI_LEGACY_SIEN	(1 << 14)	/* serialized IRQ */
+#define YMFPCI_LEGACY_LAD	(1 << 15)	/* legacy audio disable */
+
+#define YMFPCI_LEGACY2_FMIO	(3 << 0)	/* OPL3 i/o address (724/740) */
+#define YMFPCI_LEGACY2_SBIO	(3 << 2)	/* SB i/o address (724/740) */
+#define YMFPCI_LEGACY2_MPUIO	(3 << 4)	/* MPU401 i/o address (724/740) */
+#define YMFPCI_LEGACY2_JSIO	(3 << 6)	/* joystick i/o address (724/740) */
+#define YMFPCI_LEGACY2_MAIM	(1 << 8)	/* MPU401 ack intr mask */
+#define YMFPCI_LEGACY2_SMOD	(3 << 11)	/* SB DMA mode */
+#define YMFPCI_LEGACY2_SBVER	(3 << 13)	/* SB version select */
+#define YMFPCI_LEGACY2_IMOD	(1 << 15)	/* legacy IRQ mode */
+/* SIEN:IMOD 0:0 = legacy irq, 0:1 = INTA, 1:0 = serialized IRQ */
+
+#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
+#define SUPPORT_JOYSTICK
+#endif
+
+/*
+ *
+ */
+
+typedef struct _snd_ymfpci_playback_bank {
+	u32 format;
+	u32 loop_default;
+	u32 base;			/* 32-bit address */
+	u32 loop_start;			/* 32-bit offset */
+	u32 loop_end;			/* 32-bit offset */
+	u32 loop_frac;			/* 8-bit fraction - loop_start */
+	u32 delta_end;			/* pitch delta end */
+	u32 lpfK_end;
+	u32 eg_gain_end;
+	u32 left_gain_end;
+	u32 right_gain_end;
+	u32 eff1_gain_end;
+	u32 eff2_gain_end;
+	u32 eff3_gain_end;
+	u32 lpfQ;
+	u32 status;
+	u32 num_of_frames;
+	u32 loop_count;
+	u32 start;
+	u32 start_frac;
+	u32 delta;
+	u32 lpfK;
+	u32 eg_gain;
+	u32 left_gain;
+	u32 right_gain;
+	u32 eff1_gain;
+	u32 eff2_gain;
+	u32 eff3_gain;
+	u32 lpfD1;
+	u32 lpfD2;
+} snd_ymfpci_playback_bank_t;
+
+typedef struct _snd_ymfpci_capture_bank {
+	u32 base;			/* 32-bit address */
+	u32 loop_end;			/* 32-bit offset */
+	u32 start;			/* 32-bit offset */
+	u32 num_of_loops;		/* counter */
+} snd_ymfpci_capture_bank_t;
+
+typedef struct _snd_ymfpci_effect_bank {
+	u32 base;			/* 32-bit address */
+	u32 loop_end;			/* 32-bit offset */
+	u32 start;			/* 32-bit offset */
+	u32 temp;
+} snd_ymfpci_effect_bank_t;
+
+typedef struct _snd_ymfpci_voice ymfpci_voice_t;
+typedef struct _snd_ymfpci_pcm ymfpci_pcm_t;
+typedef struct _snd_ymfpci ymfpci_t;
+
+typedef enum {
+	YMFPCI_PCM,
+	YMFPCI_SYNTH,
+	YMFPCI_MIDI
+} ymfpci_voice_type_t;
+
+struct _snd_ymfpci_voice {
+	ymfpci_t *chip;
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth: 1,
+	    midi: 1;
+	snd_ymfpci_playback_bank_t *bank;
+	dma_addr_t bank_addr;
+	void (*interrupt)(ymfpci_t *chip, ymfpci_voice_t *voice);
+	ymfpci_pcm_t *ypcm;
+};
+
+typedef enum {
+	PLAYBACK_VOICE,
+	CAPTURE_REC,
+	CAPTURE_AC97,
+	EFFECT_DRY_LEFT,
+	EFFECT_DRY_RIGHT,
+	EFFECT_EFF1,
+	EFFECT_EFF2,
+	EFFECT_EFF3
+} snd_ymfpci_pcm_type_t;
+
+struct _snd_ymfpci_pcm {
+	ymfpci_t *chip;
+	snd_ymfpci_pcm_type_t type;
+	snd_pcm_substream_t *substream;
+	ymfpci_voice_t *voices[2];	/* playback only */
+	unsigned int running: 1;
+	unsigned int output_front: 1;
+	unsigned int output_rear: 1;
+	u32 period_size;		/* cached from runtime->period_size */
+	u32 buffer_size;		/* cached from runtime->buffer_size */
+	u32 period_pos;
+	u32 last_pos;
+	u32 capture_bank_number;
+	u32 shift;
+};
+
+struct _snd_ymfpci {
+	int irq;
+
+	unsigned int device_id;	/* PCI device ID */
+	unsigned int rev;	/* PCI revision */
+	unsigned long reg_area_phys;
+	void __iomem *reg_area_virt;
+	struct resource *res_reg_area;
+	struct resource *fm_res;
+	struct resource *mpu_res;
+
+	unsigned short old_legacy_ctrl;
+#ifdef SUPPORT_JOYSTICK
+	struct gameport *gameport;
+#endif
+
+	struct snd_dma_buffer work_ptr;
+
+	unsigned int bank_size_playback;
+	unsigned int bank_size_capture;
+	unsigned int bank_size_effect;
+	unsigned int work_size;
+
+	void *bank_base_playback;
+	void *bank_base_capture;
+	void *bank_base_effect;
+	void *work_base;
+	dma_addr_t bank_base_playback_addr;
+	dma_addr_t bank_base_capture_addr;
+	dma_addr_t bank_base_effect_addr;
+	dma_addr_t work_base_addr;
+	struct snd_dma_buffer ac3_tmp_base;
+
+	u32 *ctrl_playback;
+	snd_ymfpci_playback_bank_t *bank_playback[YDSXG_PLAYBACK_VOICES][2];
+	snd_ymfpci_capture_bank_t *bank_capture[YDSXG_CAPTURE_VOICES][2];
+	snd_ymfpci_effect_bank_t *bank_effect[YDSXG_EFFECT_VOICES][2];
+
+	int start_count;
+
+	u32 active_bank;
+	ymfpci_voice_t voices[64];
+
+	ac97_bus_t *ac97_bus;
+	ac97_t *ac97;
+	snd_rawmidi_t *rawmidi;
+	snd_timer_t *timer;
+
+	struct pci_dev *pci;
+	snd_card_t *card;
+	snd_pcm_t *pcm;
+	snd_pcm_t *pcm2;
+	snd_pcm_t *pcm_spdif;
+	snd_pcm_t *pcm_4ch;
+	snd_pcm_substream_t *capture_substream[YDSXG_CAPTURE_VOICES];
+	snd_pcm_substream_t *effect_substream[YDSXG_EFFECT_VOICES];
+	snd_kcontrol_t *ctl_vol_recsrc;
+	snd_kcontrol_t *ctl_vol_adcrec;
+	snd_kcontrol_t *ctl_vol_spdifrec;
+	unsigned short spdif_bits, spdif_pcm_bits;
+	snd_kcontrol_t *spdif_pcm_ctl;
+	int mode_dup4ch;
+	int rear_opened;
+	int spdif_opened;
+
+	spinlock_t reg_lock;
+	spinlock_t voice_lock;
+	wait_queue_head_t interrupt_sleep;
+	atomic_t interrupt_sleep_count;
+	snd_info_entry_t *proc_entry;
+
+#ifdef CONFIG_PM
+	u32 *saved_regs;
+	u32 saved_ydsxgr_mode;
+#endif
+};
+
+int snd_ymfpci_create(snd_card_t * card,
+		      struct pci_dev *pci,
+		      unsigned short old_legacy_ctrl,
+		      ymfpci_t ** rcodec);
+void snd_ymfpci_free_gameport(ymfpci_t *chip);
+
+int snd_ymfpci_pcm(ymfpci_t *chip, int device, snd_pcm_t **rpcm);
+int snd_ymfpci_pcm2(ymfpci_t *chip, int device, snd_pcm_t **rpcm);
+int snd_ymfpci_pcm_spdif(ymfpci_t *chip, int device, snd_pcm_t **rpcm);
+int snd_ymfpci_pcm_4ch(ymfpci_t *chip, int device, snd_pcm_t **rpcm);
+int snd_ymfpci_mixer(ymfpci_t *chip, int rear_switch);
+int snd_ymfpci_timer(ymfpci_t *chip, int device);
+
+#endif /* __SOUND_YMFPCI_H */
diff --git a/include/video/aty128.h b/include/video/aty128.h
new file mode 100644
index 000000000000..7079beb005e8
--- /dev/null
+++ b/include/video/aty128.h
@@ -0,0 +1,422 @@
+/*  $Id: aty128.h,v 1.1 1999/10/12 11:00:40 geert Exp $
+ *  linux/drivers/video/aty128.h
+ *  Register definitions for ATI Rage128 boards
+ *
+ *  Anthony Tong <atong@uiuc.edu>, 1999
+ *  Brad Douglas <brad@neruo.com>, 2000
+ */
+
+#ifndef REG_RAGE128_H
+#define REG_RAGE128_H
+
+#define CLOCK_CNTL_INDEX			0x0008
+#define CLOCK_CNTL_DATA				0x000c
+#define BIOS_0_SCRATCH				0x0010
+#define BUS_CNTL				0x0030
+#define BUS_CNTL1				0x0034
+#define GEN_INT_CNTL				0x0040
+#define CRTC_GEN_CNTL				0x0050
+#define CRTC_EXT_CNTL				0x0054
+#define DAC_CNTL				0x0058
+#define I2C_CNTL_1				0x0094
+#define PALETTE_INDEX				0x00b0
+#define PALETTE_DATA				0x00b4
+#define CONFIG_CNTL				0x00e0
+#define GEN_RESET_CNTL				0x00f0
+#define CONFIG_MEMSIZE				0x00f8
+#define MEM_CNTL				0x0140
+#define MEM_POWER_MISC				0x015c
+#define AGP_BASE				0x0170
+#define AGP_CNTL				0x0174
+#define AGP_APER_OFFSET				0x0178
+#define PCI_GART_PAGE				0x017c
+#define PC_NGUI_MODE				0x0180
+#define PC_NGUI_CTLSTAT				0x0184
+#define MPP_TB_CONFIG				0x01C0
+#define MPP_GP_CONFIG				0x01C8
+#define VIPH_CONTROL				0x01D0
+#define CRTC_H_TOTAL_DISP			0x0200
+#define CRTC_H_SYNC_STRT_WID			0x0204
+#define CRTC_V_TOTAL_DISP			0x0208
+#define CRTC_V_SYNC_STRT_WID			0x020c
+#define CRTC_VLINE_CRNT_VLINE			0x0210
+#define CRTC_CRNT_FRAME				0x0214
+#define CRTC_GUI_TRIG_VLINE			0x0218
+#define CRTC_OFFSET				0x0224
+#define CRTC_OFFSET_CNTL			0x0228
+#define CRTC_PITCH				0x022c
+#define OVR_CLR					0x0230
+#define OVR_WID_LEFT_RIGHT			0x0234
+#define OVR_WID_TOP_BOTTOM			0x0238
+#define LVDS_GEN_CNTL				0x02d0
+#define DDA_CONFIG				0x02e0
+#define DDA_ON_OFF				0x02e4
+#define VGA_DDA_CONFIG				0x02e8
+#define VGA_DDA_ON_OFF				0x02ec
+#define CRTC2_H_TOTAL_DISP			0x0300
+#define CRTC2_H_SYNC_STRT_WID			0x0304
+#define CRTC2_V_TOTAL_DISP			0x0308
+#define CRTC2_V_SYNC_STRT_WID			0x030c
+#define CRTC2_VLINE_CRNT_VLINE			0x0310
+#define CRTC2_CRNT_FRAME			0x0314
+#define CRTC2_GUI_TRIG_VLINE			0x0318
+#define CRTC2_OFFSET				0x0324
+#define CRTC2_OFFSET_CNTL			0x0328
+#define CRTC2_PITCH				0x032c
+#define DDA2_CONFIG				0x03e0
+#define DDA2_ON_OFF				0x03e4
+#define CRTC2_GEN_CNTL				0x03f8
+#define CRTC2_STATUS				0x03fc
+#define OV0_SCALE_CNTL				0x0420
+#define SUBPIC_CNTL				0x0540
+#define PM4_BUFFER_OFFSET			0x0700
+#define PM4_BUFFER_CNTL				0x0704
+#define PM4_BUFFER_WM_CNTL			0x0708
+#define PM4_BUFFER_DL_RPTR_ADDR			0x070c
+#define PM4_BUFFER_DL_RPTR			0x0710
+#define PM4_BUFFER_DL_WPTR			0x0714
+#define PM4_VC_FPU_SETUP			0x071c
+#define PM4_FPU_CNTL				0x0720
+#define PM4_VC_FORMAT				0x0724
+#define PM4_VC_CNTL				0x0728
+#define PM4_VC_I01				0x072c
+#define PM4_VC_VLOFF				0x0730
+#define PM4_VC_VLSIZE				0x0734
+#define PM4_IW_INDOFF				0x0738
+#define PM4_IW_INDSIZE				0x073c
+#define PM4_FPU_FPX0				0x0740
+#define PM4_FPU_FPY0				0x0744
+#define PM4_FPU_FPX1				0x0748
+#define PM4_FPU_FPY1				0x074c
+#define PM4_FPU_FPX2				0x0750
+#define PM4_FPU_FPY2				0x0754
+#define PM4_FPU_FPY3				0x0758
+#define PM4_FPU_FPY4				0x075c
+#define PM4_FPU_FPY5				0x0760
+#define PM4_FPU_FPY6				0x0764
+#define PM4_FPU_FPR				0x0768
+#define PM4_FPU_FPG				0x076c
+#define PM4_FPU_FPB				0x0770
+#define PM4_FPU_FPA				0x0774
+#define PM4_FPU_INTXY0				0x0780
+#define PM4_FPU_INTXY1				0x0784
+#define PM4_FPU_INTXY2				0x0788
+#define PM4_FPU_INTARGB				0x078c
+#define PM4_FPU_FPTWICEAREA			0x0790
+#define PM4_FPU_DMAJOR01			0x0794
+#define PM4_FPU_DMAJOR12			0x0798
+#define PM4_FPU_DMAJOR02			0x079c
+#define PM4_FPU_STAT				0x07a0
+#define PM4_STAT				0x07b8
+#define PM4_TEST_CNTL				0x07d0
+#define PM4_MICROCODE_ADDR			0x07d4
+#define PM4_MICROCODE_RADDR			0x07d8
+#define PM4_MICROCODE_DATAH			0x07dc
+#define PM4_MICROCODE_DATAL			0x07e0
+#define PM4_CMDFIFO_ADDR			0x07e4
+#define PM4_CMDFIFO_DATAH			0x07e8
+#define PM4_CMDFIFO_DATAL			0x07ec
+#define PM4_BUFFER_ADDR				0x07f0
+#define PM4_BUFFER_DATAH			0x07f4
+#define PM4_BUFFER_DATAL			0x07f8
+#define PM4_MICRO_CNTL				0x07fc
+#define CAP0_TRIG_CNTL				0x0950
+#define CAP1_TRIG_CNTL				0x09c0
+
+/******************************************************************************
+ *                  GUI Block Memory Mapped Registers                         *
+ *                     These registers are FIFOed.                            *
+ *****************************************************************************/
+#define PM4_FIFO_DATA_EVEN			0x1000
+#define PM4_FIFO_DATA_ODD			0x1004
+
+#define DST_OFFSET				0x1404
+#define DST_PITCH				0x1408
+#define DST_WIDTH				0x140c
+#define DST_HEIGHT				0x1410
+#define SRC_X					0x1414
+#define SRC_Y					0x1418
+#define DST_X					0x141c
+#define DST_Y					0x1420
+#define SRC_PITCH_OFFSET			0x1428
+#define DST_PITCH_OFFSET			0x142c
+#define SRC_Y_X					0x1434
+#define DST_Y_X					0x1438
+#define DST_HEIGHT_WIDTH			0x143c
+#define DP_GUI_MASTER_CNTL			0x146c
+#define BRUSH_SCALE				0x1470
+#define BRUSH_Y_X				0x1474
+#define DP_BRUSH_BKGD_CLR			0x1478
+#define DP_BRUSH_FRGD_CLR			0x147c
+#define DST_WIDTH_X				0x1588
+#define DST_HEIGHT_WIDTH_8			0x158c
+#define SRC_X_Y					0x1590
+#define DST_X_Y					0x1594
+#define DST_WIDTH_HEIGHT			0x1598
+#define DST_WIDTH_X_INCY			0x159c
+#define DST_HEIGHT_Y				0x15a0
+#define DST_X_SUB				0x15a4
+#define DST_Y_SUB				0x15a8
+#define SRC_OFFSET				0x15ac
+#define SRC_PITCH				0x15b0
+#define DST_HEIGHT_WIDTH_BW			0x15b4
+#define CLR_CMP_CNTL				0x15c0
+#define CLR_CMP_CLR_SRC				0x15c4
+#define CLR_CMP_CLR_DST				0x15c8
+#define CLR_CMP_MASK				0x15cc
+#define DP_SRC_FRGD_CLR				0x15d8
+#define DP_SRC_BKGD_CLR				0x15dc
+#define DST_BRES_ERR				0x1628
+#define DST_BRES_INC				0x162c
+#define DST_BRES_DEC				0x1630
+#define DST_BRES_LNTH				0x1634
+#define DST_BRES_LNTH_SUB			0x1638
+#define SC_LEFT					0x1640
+#define SC_RIGHT				0x1644
+#define SC_TOP					0x1648
+#define SC_BOTTOM				0x164c
+#define SRC_SC_RIGHT				0x1654
+#define SRC_SC_BOTTOM				0x165c
+#define GUI_DEBUG0				0x16a0
+#define GUI_DEBUG1				0x16a4
+#define GUI_TIMEOUT				0x16b0
+#define GUI_TIMEOUT0				0x16b4
+#define GUI_TIMEOUT1				0x16b8
+#define GUI_PROBE				0x16bc
+#define DP_CNTL					0x16c0
+#define DP_DATATYPE				0x16c4
+#define DP_MIX					0x16c8
+#define DP_WRITE_MASK				0x16cc
+#define DP_CNTL_XDIR_YDIR_YMAJOR		0x16d0
+#define DEFAULT_OFFSET				0x16e0
+#define DEFAULT_PITCH				0x16e4
+#define DEFAULT_SC_BOTTOM_RIGHT			0x16e8
+#define SC_TOP_LEFT				0x16ec
+#define SC_BOTTOM_RIGHT				0x16f0
+#define SRC_SC_BOTTOM_RIGHT			0x16f4
+#define WAIT_UNTIL				0x1720
+#define CACHE_CNTL				0x1724
+#define GUI_STAT				0x1740
+#define PC_GUI_MODE				0x1744
+#define PC_GUI_CTLSTAT				0x1748
+#define PC_DEBUG_MODE				0x1760
+#define BRES_DST_ERR_DEC			0x1780
+#define TRAIL_BRES_T12_ERR_DEC			0x1784
+#define TRAIL_BRES_T12_INC			0x1788
+#define DP_T12_CNTL				0x178c
+#define DST_BRES_T1_LNTH			0x1790
+#define DST_BRES_T2_LNTH			0x1794
+#define SCALE_SRC_HEIGHT_WIDTH			0x1994
+#define SCALE_OFFSET_0				0x1998
+#define SCALE_PITCH				0x199c
+#define SCALE_X_INC				0x19a0
+#define SCALE_Y_INC				0x19a4
+#define SCALE_HACC				0x19a8
+#define SCALE_VACC				0x19ac
+#define SCALE_DST_X_Y				0x19b0
+#define SCALE_DST_HEIGHT_WIDTH			0x19b4
+#define SCALE_3D_CNTL				0x1a00
+#define SCALE_3D_DATATYPE			0x1a20
+#define SETUP_CNTL				0x1bc4
+#define SOLID_COLOR				0x1bc8
+#define WINDOW_XY_OFFSET			0x1bcc
+#define DRAW_LINE_POINT				0x1bd0
+#define SETUP_CNTL_PM4				0x1bd4
+#define DST_PITCH_OFFSET_C			0x1c80
+#define DP_GUI_MASTER_CNTL_C			0x1c84
+#define SC_TOP_LEFT_C				0x1c88
+#define SC_BOTTOM_RIGHT_C			0x1c8c
+
+#define CLR_CMP_MASK_3D				0x1A28
+#define MISC_3D_STATE_CNTL_REG			0x1CA0
+#define MC_SRC1_CNTL				0x19D8
+#define TEX_CNTL				0x1800
+
+/* CONSTANTS */
+#define GUI_ACTIVE				0x80000000
+#define ENGINE_IDLE				0x0
+
+#define PLL_WR_EN				0x00000080
+
+#define CLK_PIN_CNTL				0x0001
+#define PPLL_CNTL				0x0002
+#define PPLL_REF_DIV				0x0003
+#define PPLL_DIV_0				0x0004
+#define PPLL_DIV_1				0x0005
+#define PPLL_DIV_2				0x0006
+#define PPLL_DIV_3				0x0007
+#define VCLK_ECP_CNTL				0x0008
+#define HTOTAL_CNTL				0x0009
+#define X_MPLL_REF_FB_DIV			0x000a
+#define XPLL_CNTL				0x000b
+#define XDLL_CNTL				0x000c
+#define XCLK_CNTL				0x000d
+#define MPLL_CNTL				0x000e
+#define MCLK_CNTL				0x000f
+#define AGP_PLL_CNTL				0x0010
+#define FCP_CNTL				0x0012
+#define PLL_TEST_CNTL				0x0013
+#define P2PLL_CNTL				0x002a
+#define P2PLL_REF_DIV				0x002b
+#define P2PLL_DIV_0				0x002b
+#define POWER_MANAGEMENT			0x002f
+
+#define PPLL_RESET				0x01
+#define PPLL_ATOMIC_UPDATE_EN			0x10000
+#define PPLL_VGA_ATOMIC_UPDATE_EN		0x20000
+#define PPLL_REF_DIV_MASK			0x3FF
+#define PPLL_FB3_DIV_MASK			0x7FF
+#define PPLL_POST3_DIV_MASK			0x70000
+#define PPLL_ATOMIC_UPDATE_R			0x8000
+#define PPLL_ATOMIC_UPDATE_W			0x8000
+#define MEM_CFG_TYPE_MASK			0x3
+#define XCLK_SRC_SEL_MASK			0x7
+#define XPLL_FB_DIV_MASK			0xFF00
+#define X_MPLL_REF_DIV_MASK			0xFF
+
+/* CRTC control values (CRTC_GEN_CNTL) */
+#define CRTC_CSYNC_EN				0x00000010
+
+#define CRTC2_DBL_SCAN_EN			0x00000001
+#define CRTC2_DISPLAY_DIS			0x00800000
+#define CRTC2_FIFO_EXTSENSE			0x00200000
+#define CRTC2_ICON_EN				0x00100000
+#define CRTC2_CUR_EN				0x00010000
+#define CRTC2_EN				0x02000000
+#define CRTC2_DISP_REQ_EN_B			0x04000000
+
+#define CRTC_PIX_WIDTH_MASK			0x00000700
+#define CRTC_PIX_WIDTH_4BPP			0x00000100
+#define CRTC_PIX_WIDTH_8BPP			0x00000200
+#define CRTC_PIX_WIDTH_15BPP			0x00000300
+#define CRTC_PIX_WIDTH_16BPP			0x00000400
+#define CRTC_PIX_WIDTH_24BPP			0x00000500
+#define CRTC_PIX_WIDTH_32BPP			0x00000600
+
+/* DAC_CNTL bit constants */
+#define DAC_8BIT_EN				0x00000100
+#define DAC_MASK				0xFF000000
+#define DAC_BLANKING				0x00000004
+#define DAC_RANGE_CNTL				0x00000003
+#define DAC_CLK_SEL				0x00000010
+#define DAC_PALETTE_ACCESS_CNTL			0x00000020
+#define DAC_PALETTE2_SNOOP_EN			0x00000040
+#define DAC_PDWN				0x00008000
+
+/* CRTC_EXT_CNTL */
+#define CRT_CRTC_ON				0x00008000
+
+/* GEN_RESET_CNTL bit constants */
+#define SOFT_RESET_GUI				0x00000001
+#define SOFT_RESET_VCLK				0x00000100
+#define SOFT_RESET_PCLK				0x00000200
+#define SOFT_RESET_ECP				0x00000400
+#define SOFT_RESET_DISPENG_XCLK			0x00000800
+
+/* PC_GUI_CTLSTAT bit constants */
+#define PC_BUSY_INIT				0x10000000
+#define PC_BUSY_GUI				0x20000000
+#define PC_BUSY_NGUI				0x40000000
+#define PC_BUSY					0x80000000
+
+#define BUS_MASTER_DIS				0x00000040
+#define PM4_BUFFER_CNTL_NONPM4			0x00000000
+
+/* DP_DATATYPE bit constants */
+#define DST_8BPP				0x00000002
+#define DST_15BPP				0x00000003
+#define DST_16BPP				0x00000004
+#define DST_24BPP				0x00000005
+#define DST_32BPP				0x00000006
+
+#define BRUSH_SOLIDCOLOR			0x00000d00
+
+/* DP_GUI_MASTER_CNTL bit constants */
+#define	GMC_SRC_PITCH_OFFSET_DEFAULT		0x00000000
+#define GMC_DST_PITCH_OFFSET_DEFAULT		0x00000000
+#define GMC_SRC_CLIP_DEFAULT			0x00000000
+#define GMC_DST_CLIP_DEFAULT			0x00000000
+#define GMC_BRUSH_SOLIDCOLOR			0x000000d0
+#define GMC_SRC_DSTCOLOR			0x00003000
+#define GMC_BYTE_ORDER_MSB_TO_LSB		0x00000000
+#define GMC_DP_SRC_RECT				0x02000000
+#define GMC_3D_FCN_EN_CLR			0x00000000
+#define GMC_AUX_CLIP_CLEAR			0x20000000
+#define GMC_DST_CLR_CMP_FCN_CLEAR		0x10000000
+#define GMC_WRITE_MASK_SET			0x40000000
+#define GMC_DP_CONVERSION_TEMP_6500		0x00000000
+
+/* DP_GUI_MASTER_CNTL ROP3 named constants */
+#define	ROP3_PATCOPY				0x00f00000
+#define ROP3_SRCCOPY				0x00cc0000
+
+#define SRC_DSTCOLOR				0x00030000
+
+/* DP_CNTL bit constants */
+#define DST_X_RIGHT_TO_LEFT			0x00000000
+#define DST_X_LEFT_TO_RIGHT			0x00000001
+#define DST_Y_BOTTOM_TO_TOP			0x00000000
+#define DST_Y_TOP_TO_BOTTOM			0x00000002
+#define DST_X_MAJOR				0x00000000
+#define DST_Y_MAJOR				0x00000004
+#define DST_X_TILE				0x00000008
+#define DST_Y_TILE				0x00000010
+#define DST_LAST_PEL				0x00000020
+#define DST_TRAIL_X_RIGHT_TO_LEFT		0x00000000
+#define DST_TRAIL_X_LEFT_TO_RIGHT		0x00000040
+#define DST_TRAP_FILL_RIGHT_TO_LEFT		0x00000000
+#define DST_TRAP_FILL_LEFT_TO_RIGHT		0x00000080
+#define DST_BRES_SIGN				0x00000100
+#define DST_HOST_BIG_ENDIAN_EN			0x00000200
+#define DST_POLYLINE_NONLAST			0x00008000
+#define DST_RASTER_STALL			0x00010000
+#define DST_POLY_EDGE				0x00040000
+
+/* DP_MIX bit constants */
+#define DP_SRC_RECT				0x00000200
+#define DP_SRC_HOST				0x00000300
+#define DP_SRC_HOST_BYTEALIGN			0x00000400
+
+/* LVDS_GEN_CNTL constants */
+#define LVDS_BL_MOD_LEVEL_MASK			0x0000ff00
+#define LVDS_BL_MOD_LEVEL_SHIFT			8
+#define LVDS_BL_MOD_EN				0x00010000
+#define LVDS_DIGION				0x00040000
+#define LVDS_BLON				0x00080000
+#define LVDS_ON					0x00000001
+#define LVDS_DISPLAY_DIS			0x00000002
+#define LVDS_PANEL_TYPE_2PIX_PER_CLK		0x00000004
+#define LVDS_PANEL_24BITS_TFT			0x00000008
+#define LVDS_FRAME_MOD_NO			0x00000000
+#define LVDS_FRAME_MOD_2_LEVELS			0x00000010
+#define LVDS_FRAME_MOD_4_LEVELS			0x00000020
+#define LVDS_RST_FM				0x00000040
+#define LVDS_EN					0x00000080
+
+/* CRTC2_GEN_CNTL constants */
+#define CRTC2_EN				0x02000000
+
+/* POWER_MANAGEMENT constants */
+#define PWR_MGT_ON				0x00000001
+#define PWR_MGT_MODE_MASK			0x00000006
+#define PWR_MGT_MODE_PIN			0x00000000
+#define PWR_MGT_MODE_REGISTER			0x00000002
+#define PWR_MGT_MODE_TIMER			0x00000004
+#define PWR_MGT_MODE_PCI			0x00000006
+#define PWR_MGT_AUTO_PWR_UP_EN			0x00000008
+#define PWR_MGT_ACTIVITY_PIN_ON			0x00000010
+#define PWR_MGT_STANDBY_POL			0x00000020
+#define PWR_MGT_SUSPEND_POL			0x00000040
+#define PWR_MGT_SELF_REFRESH			0x00000080
+#define PWR_MGT_ACTIVITY_PIN_EN			0x00000100
+#define PWR_MGT_KEYBD_SNOOP			0x00000200
+#define PWR_MGT_TRISTATE_MEM_EN			0x00000800
+#define PWR_MGT_SELW4MS				0x00001000
+#define PWR_MGT_SLOWDOWN_MCLK			0x00002000
+
+#define PMI_PMSCR_REG				0x60
+                                                                                
+/* used by ATI bug fix for hardware ROM */
+#define RAGE128_MPP_TB_CONFIG                   0x01c0
+
+#endif				/* REG_RAGE128_H */
diff --git a/include/video/cirrus.h b/include/video/cirrus.h
new file mode 100644
index 000000000000..b2776b6c8679
--- /dev/null
+++ b/include/video/cirrus.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/video/clgenfb.h - Cirrus Logic chipset constants
+ *
+ * Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
+ *
+ * Original clgenfb author:  Frank Neumann
+ *
+ * Based on retz3fb.c and clgen.c:
+ *      Copyright (C) 1997 Jes Sorensen
+ *      Copyright (C) 1996 Frank Neumann
+ *
+ ***************************************************************
+ *
+ * Format this code with GNU indent '-kr -i8 -pcs' options.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __CLGENFB_H__
+#define __CLGENFB_H__
+
+/* OLD COMMENT: definitions for Piccolo/SD64 VGA controller chip   */
+/* OLD COMMENT: these definitions might most of the time also work */
+/* OLD COMMENT: for other CL-GD542x/543x based boards..            */
+
+/*** External/General Registers ***/
+#define CL_POS102	0x102  	/* POS102 register */
+#define CL_VSSM		0x46e8 	/* Adapter Sleep */
+#define CL_VSSM2	0x3c3	/* Motherboard Sleep */
+
+/*** VGA Sequencer Registers ***/
+#define CL_SEQR0	0x0	/* Reset */
+/* the following are from the "extension registers" group */
+#define CL_SEQR6	0x6	/* Unlock ALL Extensions */
+#define CL_SEQR7	0x7	/* Extended Sequencer Mode */
+#define CL_SEQR8	0x8	/* EEPROM Control */
+#define CL_SEQR9	0x9	/* Scratch Pad 0 (do not access!) */
+#define CL_SEQRA	0xa	/* Scratch Pad 1 (do not access!) */
+#define CL_SEQRB	0xb	/* VCLK0 Numerator */
+#define CL_SEQRC	0xc	/* VCLK1 Numerator */
+#define CL_SEQRD	0xd	/* VCLK2 Numerator */
+#define CL_SEQRE	0xe	/* VCLK3 Numerator */
+#define CL_SEQRF	0xf	/* DRAM Control */
+#define CL_SEQR10	0x10	/* Graphics Cursor X Position */
+#define CL_SEQR11	0x11	/* Graphics Cursor Y Position */
+#define CL_SEQR12	0x12	/* Graphics Cursor Attributes */
+#define CL_SEQR13	0x13	/* Graphics Cursor Pattern Address Offset */
+#define CL_SEQR14	0x14	/* Scratch Pad 2 (CL-GD5426/'28 Only) (do not access!) */
+#define CL_SEQR15	0x15	/* Scratch Pad 3 (CL-GD5426/'28 Only) (do not access!) */
+#define CL_SEQR16	0x16	/* Performance Tuning (CL-GD5424/'26/'28 Only) */
+#define CL_SEQR17	0x17	/* Configuration ReadBack and Extended Control (CL-GF5428 Only) */
+#define CL_SEQR18	0x18	/* Signature Generator Control (Not CL-GD5420) */
+#define CL_SEQR19	0x19	/* Signature Generator Result Low Byte (Not CL-GD5420) */
+#define CL_SEQR1A	0x1a	/* Signature Generator Result High Byte (Not CL-GD5420) */
+#define CL_SEQR1B	0x1b	/* VCLK0 Denominator and Post-Scalar Value */
+#define CL_SEQR1C	0x1c	/* VCLK1 Denominator and Post-Scalar Value */
+#define CL_SEQR1D	0x1d	/* VCLK2 Denominator and Post-Scalar Value */
+#define CL_SEQR1E	0x1e	/* VCLK3 Denominator and Post-Scalar Value */
+#define CL_SEQR1F	0x1f	/* BIOS ROM write enable and MCLK Select */
+
+/*** CRT Controller Registers ***/
+#define CL_CRT22	0x22	/* Graphics Data Latches ReadBack */
+#define CL_CRT24	0x24	/* Attribute Controller Toggle ReadBack */
+#define CL_CRT26	0x26	/* Attribute Controller Index ReadBack */
+/* the following are from the "extension registers" group */
+#define CL_CRT19	0x19	/* Interlace End */
+#define CL_CRT1A	0x1a	/* Interlace Control */
+#define CL_CRT1B	0x1b	/* Extended Display Controls */
+#define CL_CRT1C	0x1c	/* Sync adjust and genlock register */
+#define CL_CRT1D	0x1d	/* Overlay Extended Control register */
+#define CL_CRT25	0x25	/* Part Status Register */
+#define CL_CRT27	0x27	/* ID Register */
+#define CL_CRT51	0x51	/* P4 disable "flicker fixer" */
+
+/*** Graphics Controller Registers ***/
+/* the following are from the "extension registers" group */
+#define CL_GR9		0x9	/* Offset Register 0 */
+#define CL_GRA		0xa	/* Offset Register 1 */
+#define CL_GRB		0xb	/* Graphics Controller Mode Extensions */
+#define CL_GRC		0xc	/* Color Key (CL-GD5424/'26/'28 Only) */
+#define CL_GRD		0xd	/* Color Key Mask (CL-GD5424/'26/'28 Only) */
+#define CL_GRE		0xe	/* Miscellaneous Control (Cl-GD5428 Only) */
+#define CL_GRF		0xf	/* Display Compression Control register */
+#define CL_GR10		0x10	/* 16-bit Pixel BG Color High Byte (Not CL-GD5420) */
+#define CL_GR11		0x11	/* 16-bit Pixel FG Color High Byte (Not CL-GD5420) */
+#define CL_GR12		0x12	/* Background Color Byte 2 Register */
+#define CL_GR13		0x13	/* Foreground Color Byte 2 Register */
+#define CL_GR14		0x14	/* Background Color Byte 3 Register */
+#define CL_GR15		0x15	/* Foreground Color Byte 3 Register */
+/* the following are CL-GD5426/'28 specific blitter registers */
+#define CL_GR20		0x20	/* BLT Width Low */
+#define CL_GR21		0x21	/* BLT Width High */
+#define CL_GR22		0x22	/* BLT Height Low */
+#define CL_GR23		0x23	/* BLT Height High */
+#define CL_GR24		0x24	/* BLT Destination Pitch Low */
+#define CL_GR25		0x25	/* BLT Destination Pitch High */
+#define CL_GR26		0x26	/* BLT Source Pitch Low */
+#define CL_GR27		0x27	/* BLT Source Pitch High */
+#define CL_GR28		0x28	/* BLT Destination Start Low */
+#define CL_GR29		0x29	/* BLT Destination Start Mid */
+#define CL_GR2A		0x2a	/* BLT Destination Start High */
+#define CL_GR2C		0x2c	/* BLT Source Start Low */
+#define CL_GR2D		0x2d	/* BLT Source Start Mid */
+#define CL_GR2E		0x2e	/* BLT Source Start High */
+#define CL_GR2F		0x2f	/* Picasso IV Blitter compat mode..? */
+#define CL_GR30		0x30	/* BLT Mode */
+#define CL_GR31		0x31	/* BLT Start/Status */
+#define CL_GR32		0x32	/* BLT Raster Operation */
+#define CL_GR33		0x33	/* another P4 "compat" register.. */
+#define CL_GR34		0x34	/* Transparent Color Select Low */
+#define CL_GR35		0x35	/* Transparent Color Select High */
+#define CL_GR38		0x38	/* Source Transparent Color Mask Low */
+#define CL_GR39		0x39	/* Source Transparent Color Mask High */
+
+/*** Attribute Controller Registers ***/
+#define CL_AR33		0x33	/* The "real" Pixel Panning register (?) */
+#define CL_AR34		0x34	/* TEST */
+
+#endif /* __CLGENFB_H__ */
diff --git a/include/video/cvisionppc.h b/include/video/cvisionppc.h
new file mode 100644
index 000000000000..11250eee9e98
--- /dev/null
+++ b/include/video/cvisionppc.h
@@ -0,0 +1,51 @@
+/*
+ * Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer
+ * driver.
+ *
+ * Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * --------------------------------------------------------------------------
+ * $Id: cvisionppc.h,v 1.8 1999/01/28 13:18:07 illo Exp $
+ * --------------------------------------------------------------------------
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef CVISIONPPC_H
+#define CVISIONPPC_H
+
+#ifndef PM2FB_H
+#include "pm2fb.h"
+#endif
+
+struct cvppc_par {
+	unsigned char* pci_config;
+	unsigned char* pci_bridge;
+	u32 user_flags;
+};
+
+#define CSPPC_PCI_BRIDGE		0xfffe0000
+#define CSPPC_BRIDGE_ENDIAN		0x0000
+#define CSPPC_BRIDGE_INT		0x0010
+
+#define	CVPPC_PCI_CONFIG		0xfffc0000
+#define CVPPC_ROM_ADDRESS		0xe2000001
+#define CVPPC_REGS_REGION		0xef000000
+#define CVPPC_FB_APERTURE_ONE		0xe0000000
+#define CVPPC_FB_APERTURE_TWO		0xe1000000
+#define CVPPC_FB_SIZE			0x00800000
+#define CVPPC_MEM_CONFIG_OLD		0xed61fcaa	/* FIXME Fujitsu?? */
+#define CVPPC_MEM_CONFIG_NEW		0xed41c532	/* FIXME USA?? */
+#define CVPPC_MEMCLOCK			83000		/* in KHz */
+
+/* CVPPC_BRIDGE_ENDIAN */
+#define CSPPCF_BRIDGE_BIG_ENDIAN	0x02
+
+/* CVPPC_BRIDGE_INT */
+#define CSPPCF_BRIDGE_ACTIVE_INT2	0x01
+
+#endif	/* CVISIONPPC_H */
+
+/*****************************************************************************
+ * That's all folks!
+ *****************************************************************************/
diff --git a/include/video/edid.h b/include/video/edid.h
new file mode 100644
index 000000000000..abc1b489c0db
--- /dev/null
+++ b/include/video/edid.h
@@ -0,0 +1,27 @@
+#ifndef __linux_video_edid_h__
+#define __linux_video_edid_h__
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#ifdef CONFIG_PPC_OF
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_X86
+struct edid_info {
+	unsigned char dummy[128];
+};
+
+extern struct edid_info edid_info;
+extern char *get_EDID_from_BIOS(void *);
+
+#endif /* CONFIG_X86 */
+
+#ifdef CONFIG_PPC_OF
+extern char *get_EDID_from_OF(struct pci_dev *pdev);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __linux_video_edid_h__ */
diff --git a/include/video/epson1355.h b/include/video/epson1355.h
new file mode 100644
index 000000000000..9759f299499e
--- /dev/null
+++ b/include/video/epson1355.h
@@ -0,0 +1,64 @@
+/*
+ * include/video/epson13xx.h -- Epson 13xx frame buffer
+ *
+ * Copyright (C) Hewlett-Packard Company.  All rights reserved.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ *
+ */
+
+#ifndef _EPSON13XX_H_
+#define _EPSON13XX_H_
+
+#define REG_REVISION_CODE              0x00
+#define REG_MEMORY_CONFIG              0x01
+#define REG_PANEL_TYPE                 0x02
+#define REG_MOD_RATE                   0x03
+#define REG_HORZ_DISP_WIDTH            0x04
+#define REG_HORZ_NONDISP_PERIOD        0x05
+#define REG_HRTC_START_POSITION        0x06
+#define REG_HRTC_PULSE_WIDTH           0x07
+#define REG_VERT_DISP_HEIGHT0          0x08
+#define REG_VERT_DISP_HEIGHT1          0x09
+#define REG_VERT_NONDISP_PERIOD        0x0A
+#define REG_VRTC_START_POSITION        0x0B
+#define REG_VRTC_PULSE_WIDTH           0x0C
+#define REG_DISPLAY_MODE               0x0D
+#define REG_SCRN1_LINE_COMPARE0        0x0E
+#define REG_SCRN1_LINE_COMPARE1        0x0F
+#define REG_SCRN1_DISP_START_ADDR0     0x10
+#define REG_SCRN1_DISP_START_ADDR1     0x11
+#define REG_SCRN1_DISP_START_ADDR2     0x12
+#define REG_SCRN2_DISP_START_ADDR0     0x13
+#define REG_SCRN2_DISP_START_ADDR1     0x14
+#define REG_SCRN2_DISP_START_ADDR2     0x15
+#define REG_MEM_ADDR_OFFSET0           0x16
+#define REG_MEM_ADDR_OFFSET1           0x17
+#define REG_PIXEL_PANNING              0x18
+#define REG_CLOCK_CONFIG               0x19
+#define REG_POWER_SAVE_CONFIG          0x1A
+#define REG_MISC                       0x1B
+#define REG_MD_CONFIG_READBACK0        0x1C
+#define REG_MD_CONFIG_READBACK1        0x1D
+#define REG_GPIO_CONFIG0               0x1E
+#define REG_GPIO_CONFIG1               0x1F
+#define REG_GPIO_CONTROL0              0x20
+#define REG_GPIO_CONTROL1              0x21
+#define REG_PERF_ENHANCEMENT0          0x22
+#define REG_PERF_ENHANCEMENT1          0x23
+#define REG_LUT_ADDR                   0x24
+#define REG_RESERVED_1                 0x25
+#define REG_LUT_DATA                   0x26
+#define REG_INK_CURSOR_CONTROL         0x27
+#define REG_CURSOR_X_POSITION0         0x28
+#define REG_CURSOR_X_POSITION1         0x29
+#define REG_CURSOR_Y_POSITION0         0x2A
+#define REG_CURSOR_Y_POSITION1         0x2B
+#define REG_INK_CURSOR_COLOR0_0        0x2C
+#define REG_INK_CURSOR_COLOR0_1        0x2D
+#define REG_INK_CURSOR_COLOR1_0        0x2E
+#define REG_INK_CURSOR_COLOR1_1        0x2F
+#define REG_INK_CURSOR_START_ADDR      0x30
+#define REG_ALTERNATE_FRM              0x31
+
+#endif
diff --git a/include/video/gbe.h b/include/video/gbe.h
new file mode 100644
index 000000000000..ad510284f8a6
--- /dev/null
+++ b/include/video/gbe.h
@@ -0,0 +1,317 @@
+/*
+ * include/video/gbe.h -- SGI GBE (Graphics Back End)
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc. (Jeffrey Newquist)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __GBE_H__
+#define __GBE_H__
+
+struct sgi_gbe {
+	volatile uint32_t ctrlstat;	/* general control */
+	volatile uint32_t dotclock;	/* dot clock PLL control */
+	volatile uint32_t i2c;		/* crt I2C control */
+	volatile uint32_t sysclk;	/* system clock PLL control */
+	volatile uint32_t i2cfp;	/* flat panel I2C control */
+	volatile uint32_t id;		/* device id/chip revision */
+	volatile uint32_t config;       /* power on configuration [1] */
+	volatile uint32_t bist;         /* internal bist status [1] */
+	uint32_t _pad0[0x010000/4 - 8];
+	volatile uint32_t vt_xy;	/* current dot coords */
+	volatile uint32_t vt_xymax;	/* maximum dot coords */
+	volatile uint32_t vt_vsync;	/* vsync on/off */
+	volatile uint32_t vt_hsync;	/* hsync on/off */
+	volatile uint32_t vt_vblank;	/* vblank on/off */
+	volatile uint32_t vt_hblank;	/* hblank on/off */
+	volatile uint32_t vt_flags;	/* polarity of vt signals */
+	volatile uint32_t vt_f2rf_lock;	/* f2rf & framelck y coord */
+	volatile uint32_t vt_intr01;	/* intr 0,1 y coords */
+	volatile uint32_t vt_intr23;	/* intr 2,3 y coords */
+	volatile uint32_t fp_hdrv;	/* flat panel hdrv on/off */
+	volatile uint32_t fp_vdrv;	/* flat panel vdrv on/off */
+	volatile uint32_t fp_de;	/* flat panel de on/off */
+	volatile uint32_t vt_hpixen;	/* intrnl horiz pixel on/off */
+	volatile uint32_t vt_vpixen;	/* intrnl vert pixel on/off */
+	volatile uint32_t vt_hcmap;	/* cmap write (horiz) */
+	volatile uint32_t vt_vcmap;	/* cmap write (vert) */
+	volatile uint32_t did_start_xy;	/* eol/f did/xy reset val */
+	volatile uint32_t crs_start_xy;	/* eol/f crs/xy reset val */
+	volatile uint32_t vc_start_xy;	/* eol/f vc/xy reset val */
+	uint32_t _pad1[0xffb0/4];
+	volatile uint32_t ovr_width_tile;/*overlay plane ctrl 0 */
+	volatile uint32_t ovr_inhwctrl;	/* overlay plane ctrl 1 */
+	volatile uint32_t ovr_control;	/* overlay plane ctrl 1 */
+	uint32_t _pad2[0xfff4/4];
+	volatile uint32_t frm_size_tile;/* normal plane ctrl 0 */
+	volatile uint32_t frm_size_pixel;/*normal plane ctrl 1 */
+	volatile uint32_t frm_inhwctrl;	/* normal plane ctrl 2 */
+	volatile uint32_t frm_control;	/* normal plane ctrl 3 */
+	uint32_t _pad3[0xfff0/4];
+	volatile uint32_t did_inhwctrl;	/* DID control */
+	volatile uint32_t did_control;	/* DID shadow */
+	uint32_t _pad4[0x7ff8/4];
+	volatile uint32_t mode_regs[32];/* WID table */
+	uint32_t _pad5[0x7f80/4];
+	volatile uint32_t cmap[6144];	/* color map */
+	uint32_t _pad6[0x2000/4];
+	volatile uint32_t cm_fifo;	/* color map fifo status */
+	uint32_t _pad7[0x7ffc/4];
+	volatile uint32_t gmap[256];	/* gamma map */
+	uint32_t _pad8[0x7c00/4];
+	volatile uint32_t gmap10[1024];	/* gamma map */
+	uint32_t _pad9[0x7000/4];
+	volatile uint32_t crs_pos;	/* cusror control 0 */
+	volatile uint32_t crs_ctl;	/* cusror control 1 */
+	volatile uint32_t crs_cmap[3];	/* crs cmap */
+	uint32_t _pad10[0x7fec/4];
+	volatile uint32_t crs_glyph[64];/* crs glyph */
+	uint32_t _pad11[0x7f00/4];
+	volatile uint32_t vc_0;	/* video capture crtl 0 */
+	volatile uint32_t vc_1;	/* video capture crtl 1 */
+	volatile uint32_t vc_2;	/* video capture crtl 2 */
+	volatile uint32_t vc_3;	/* video capture crtl 3 */
+	volatile uint32_t vc_4;	/* video capture crtl 4 */
+	volatile uint32_t vc_5;	/* video capture crtl 5 */
+	volatile uint32_t vc_6;	/* video capture crtl 6 */
+	volatile uint32_t vc_7;	/* video capture crtl 7 */
+	volatile uint32_t vc_8;	/* video capture crtl 8 */
+};
+
+#define MASK(msb, lsb)		\
+	( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
+#define GET(v, msb, lsb)	\
+	( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
+#define SET(v, f, msb, lsb)	\
+	( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
+
+#define GET_GBE_FIELD(reg, field, v)		\
+	GET((v), GBE_##reg##_##field##_MSB, GBE_##reg##_##field##_LSB)
+#define SET_GBE_FIELD(reg, field, v, f)		\
+	SET((v), (f), GBE_##reg##_##field##_MSB, GBE_##reg##_##field##_LSB)
+
+/*
+ * Bit mask information
+ */
+#define GBE_CTRLSTAT_CHIPID_MSB		 3
+#define GBE_CTRLSTAT_CHIPID_LSB		 0
+#define GBE_CTRLSTAT_SENSE_N_MSB	 4
+#define GBE_CTRLSTAT_SENSE_N_LSB	 4
+#define GBE_CTRLSTAT_PCLKSEL_MSB	29
+#define GBE_CTRLSTAT_PCLKSEL_LSB	28
+
+#define GBE_DOTCLK_M_MSB		 7
+#define GBE_DOTCLK_M_LSB		 0
+#define GBE_DOTCLK_N_MSB		13
+#define GBE_DOTCLK_N_LSB		 8
+#define GBE_DOTCLK_P_MSB		15
+#define GBE_DOTCLK_P_LSB		14
+#define GBE_DOTCLK_RUN_MSB		20
+#define GBE_DOTCLK_RUN_LSB		20
+
+#define GBE_VT_XY_Y_MSB		23
+#define GBE_VT_XY_Y_LSB		12
+#define GBE_VT_XY_X_MSB		11
+#define GBE_VT_XY_X_LSB		 0
+#define GBE_VT_XY_FREEZE_MSB		31
+#define GBE_VT_XY_FREEZE_LSB		31
+
+#define GBE_FP_VDRV_ON_MSB	23
+#define GBE_FP_VDRV_ON_LSB	12
+#define GBE_FP_VDRV_OFF_MSB	11
+#define GBE_FP_VDRV_OFF_LSB	0
+
+#define GBE_FP_HDRV_ON_MSB	23
+#define GBE_FP_HDRV_ON_LSB	12
+#define GBE_FP_HDRV_OFF_MSB	11
+#define GBE_FP_HDRV_OFF_LSB	0
+
+#define GBE_FP_DE_ON_MSB		23
+#define GBE_FP_DE_ON_LSB		12
+#define GBE_FP_DE_OFF_MSB		11
+#define GBE_FP_DE_OFF_LSB		0
+
+#define GBE_VT_VSYNC_VSYNC_ON_MSB	23
+#define GBE_VT_VSYNC_VSYNC_ON_LSB	12
+#define GBE_VT_VSYNC_VSYNC_OFF_MSB	11
+#define GBE_VT_VSYNC_VSYNC_OFF_LSB	 0
+
+#define GBE_VT_HSYNC_HSYNC_ON_MSB	23
+#define GBE_VT_HSYNC_HSYNC_ON_LSB	12
+#define GBE_VT_HSYNC_HSYNC_OFF_MSB	11
+#define GBE_VT_HSYNC_HSYNC_OFF_LSB	 0
+
+#define GBE_VT_VBLANK_VBLANK_ON_MSB	23
+#define GBE_VT_VBLANK_VBLANK_ON_LSB	12
+#define GBE_VT_VBLANK_VBLANK_OFF_MSB	11
+#define GBE_VT_VBLANK_VBLANK_OFF_LSB	 0
+
+#define GBE_VT_HBLANK_HBLANK_ON_MSB	23
+#define GBE_VT_HBLANK_HBLANK_ON_LSB	12
+#define GBE_VT_HBLANK_HBLANK_OFF_MSB	11
+#define GBE_VT_HBLANK_HBLANK_OFF_LSB	 0
+
+#define GBE_VT_FLAGS_F2RF_HIGH_MSB	 6
+#define GBE_VT_FLAGS_F2RF_HIGH_LSB	 6
+#define GBE_VT_FLAGS_SYNC_LOW_MSB	 5
+#define GBE_VT_FLAGS_SYNC_LOW_LSB	 5
+#define GBE_VT_FLAGS_SYNC_HIGH_MSB	 4
+#define GBE_VT_FLAGS_SYNC_HIGH_LSB	 4
+#define GBE_VT_FLAGS_HDRV_LOW_MSB	 3
+#define GBE_VT_FLAGS_HDRV_LOW_LSB	 3
+#define GBE_VT_FLAGS_HDRV_INVERT_MSB	 2
+#define GBE_VT_FLAGS_HDRV_INVERT_LSB	 2
+#define GBE_VT_FLAGS_VDRV_LOW_MSB	 1
+#define GBE_VT_FLAGS_VDRV_LOW_LSB	 1
+#define GBE_VT_FLAGS_VDRV_INVERT_MSB	 0
+#define GBE_VT_FLAGS_VDRV_INVERT_LSB	 0
+
+#define GBE_VT_VCMAP_VCMAP_ON_MSB	23
+#define GBE_VT_VCMAP_VCMAP_ON_LSB	12
+#define GBE_VT_VCMAP_VCMAP_OFF_MSB	11
+#define GBE_VT_VCMAP_VCMAP_OFF_LSB	 0
+
+#define GBE_VT_HCMAP_HCMAP_ON_MSB	23
+#define GBE_VT_HCMAP_HCMAP_ON_LSB	12
+#define GBE_VT_HCMAP_HCMAP_OFF_MSB	11
+#define GBE_VT_HCMAP_HCMAP_OFF_LSB	 0
+
+#define GBE_VT_XYMAX_MAXX_MSB	11
+#define GBE_VT_XYMAX_MAXX_LSB	 0
+#define GBE_VT_XYMAX_MAXY_MSB	23
+#define GBE_VT_XYMAX_MAXY_LSB	12
+
+#define GBE_VT_HPIXEN_HPIXEN_ON_MSB	23
+#define GBE_VT_HPIXEN_HPIXEN_ON_LSB	12
+#define GBE_VT_HPIXEN_HPIXEN_OFF_MSB	11
+#define GBE_VT_HPIXEN_HPIXEN_OFF_LSB	 0
+
+#define GBE_VT_VPIXEN_VPIXEN_ON_MSB	23
+#define GBE_VT_VPIXEN_VPIXEN_ON_LSB	12
+#define GBE_VT_VPIXEN_VPIXEN_OFF_MSB	11
+#define GBE_VT_VPIXEN_VPIXEN_OFF_LSB	 0
+
+#define GBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB	 0
+#define GBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB	 0
+
+#define GBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB	 0
+#define GBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB	 0
+
+#define GBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB	13
+#define GBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB	13
+
+#define GBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB	 0
+#define GBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB	 0
+#define GBE_FRM_CONTROL_FRM_TILE_PTR_MSB	31
+#define GBE_FRM_CONTROL_FRM_TILE_PTR_LSB	 9
+#define GBE_FRM_CONTROL_FRM_LINEAR_MSB		 1
+#define GBE_FRM_CONTROL_FRM_LINEAR_LSB		 1
+
+#define GBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB	 0
+#define GBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB	 0
+
+#define GBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB	12
+#define GBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB	 5
+#define GBE_FRM_SIZE_TILE_FRM_RHS_MSB		 4
+#define GBE_FRM_SIZE_TILE_FRM_RHS_LSB		 0
+#define GBE_FRM_SIZE_TILE_FRM_DEPTH_MSB		14
+#define GBE_FRM_SIZE_TILE_FRM_DEPTH_LSB		13
+#define GBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB	15
+#define GBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB	15
+
+#define GBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB	31
+#define GBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB	16
+
+#define GBE_DID_CONTROL_DID_DMA_ENABLE_MSB	 0
+#define GBE_DID_CONTROL_DID_DMA_ENABLE_LSB	 0
+#define GBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB	 0
+#define GBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB	 0
+
+#define GBE_DID_START_XY_DID_STARTY_MSB		23
+#define GBE_DID_START_XY_DID_STARTY_LSB		12
+#define GBE_DID_START_XY_DID_STARTX_MSB		11
+#define GBE_DID_START_XY_DID_STARTX_LSB		 0
+
+#define GBE_CRS_START_XY_CRS_STARTY_MSB		23
+#define GBE_CRS_START_XY_CRS_STARTY_LSB		12
+#define GBE_CRS_START_XY_CRS_STARTX_MSB		11
+#define GBE_CRS_START_XY_CRS_STARTX_LSB		 0
+
+#define GBE_WID_AUX_MSB		12
+#define GBE_WID_AUX_LSB		11
+#define GBE_WID_GAMMA_MSB	10
+#define GBE_WID_GAMMA_LSB	10
+#define GBE_WID_CM_MSB		 9
+#define GBE_WID_CM_LSB		 5
+#define GBE_WID_TYP_MSB		 4
+#define GBE_WID_TYP_LSB		 2
+#define GBE_WID_BUF_MSB		 1
+#define GBE_WID_BUF_LSB		 0
+
+#define GBE_VC_START_XY_VC_STARTY_MSB	23
+#define GBE_VC_START_XY_VC_STARTY_LSB	12
+#define GBE_VC_START_XY_VC_STARTX_MSB	11
+#define GBE_VC_START_XY_VC_STARTX_LSB	 0
+
+/* Constants */
+
+#define GBE_FRM_DEPTH_8		0
+#define GBE_FRM_DEPTH_16	1
+#define GBE_FRM_DEPTH_32	2
+
+#define GBE_CMODE_I8		0
+#define GBE_CMODE_I12		1
+#define GBE_CMODE_RG3B2		2
+#define GBE_CMODE_RGB4		3
+#define GBE_CMODE_ARGB5		4
+#define GBE_CMODE_RGB8		5
+#define GBE_CMODE_RGBA5		6
+#define GBE_CMODE_RGB10		7
+
+#define GBE_BMODE_BOTH		3
+
+#define GBE_CRS_MAGIC		54
+#define GBE_PIXEN_MAGIC_ON	19
+#define GBE_PIXEN_MAGIC_OFF	 2
+
+#define GBE_TLB_SIZE		128
+
+/* [1] - only GBE revision 2 and later */
+
+/*
+ * Video Timing Data Structure
+ */
+
+struct gbe_timing_info {
+	int flags;
+	short width;		/* Monitor resolution */
+	short height;
+	int fields_sec;		/* fields/sec  (Hz -3 dec. places */
+	int cfreq;		/* pixel clock frequency (MHz -3 dec. places) */
+	short htotal;		/* Horizontal total pixels */
+	short hblank_start;	/* Horizontal blank start */
+	short hblank_end;	/* Horizontal blank end */
+	short hsync_start;	/* Horizontal sync start */
+	short hsync_end;	/* Horizontal sync end */
+	short vtotal;		/* Vertical total lines */
+	short vblank_start;	/* Vertical blank start */
+	short vblank_end;	/* Vertical blank end */
+	short vsync_start;	/* Vertical sync start */
+	short vsync_end;	/* Vertical sync end */
+	short pll_m;		/* PLL M parameter */
+	short pll_n;		/* PLL P parameter */
+	short pll_p;		/* PLL N parameter */
+};
+
+/* Defines for gbe_vof_info_t flags */
+
+#define GBE_VOF_UNKNOWNMON	1
+#define GBE_VOF_STEREO		2
+#define GBE_VOF_DO_GENSYNC	4	/* enable incoming sync */
+#define GBE_VOF_SYNC_ON_GREEN	8	/* sync on green */
+#define GBE_VOF_FLATPANEL	0x1000	/* FLATPANEL Timing */
+#define GBE_VOF_MAGICKEY	0x2000	/* Backdoor key */
+
+#endif		/* ! __GBE_H__ */
diff --git a/include/video/iga.h b/include/video/iga.h
new file mode 100644
index 000000000000..5a48f16578f8
--- /dev/null
+++ b/include/video/iga.h
@@ -0,0 +1,24 @@
+/* $Id: iga.h,v 1.2 1999/09/11 22:56:31 zaitcev Exp $
+ * iga1682.h: Sparc/PCI iga1682 driver constants etc.
+ *
+ * Copyleft 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef _IGA1682_H
+#define _IGA1682_H 1
+
+#define IGA_ATTR_CTL			0x3C0
+#define   IGA_IDX_VGA_OVERSCAN		0x11
+#define DAC_W_INDEX                     0x03C8
+#define DAC_DATA                        0x03C9
+#define IGA_EXT_CNTRL                   0x3CE
+#define   IGA_IDX_EXT_BUS_CNTL          0x30
+#define     MEM_SIZE_ALIAS              0x3
+#define     MEM_SIZE_1M                 0x0
+#define     MEM_SIZE_2M                 0x1
+#define     MEM_SIZE_4M                 0x2
+#define     MEM_SIZE_RESERVED           0x3
+#define   IGA_IDX_OVERSCAN_COLOR        0x58
+#define   IGA_IDX_EXT_MEM_2             0x72
+
+#endif /* !(_IGA1682_H) */
diff --git a/include/video/kyro.h b/include/video/kyro.h
new file mode 100644
index 000000000000..1bed37cfa68c
--- /dev/null
+++ b/include/video/kyro.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/drivers/video/kyro/kryo.h
+ *
+ *  Copyright (C) 2002 STMicroelectronics
+ *  Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _KYRO_H
+#define _KYRO_H
+
+struct kyrofb_info {
+	void __iomem *regbase;
+
+	u32 HTot;	/* Hor Total Time    */
+	u32 HFP;	/* Hor Front Porch   */
+	u32 HST;	/* Hor Sync Time     */
+	u32 HBP;	/* Hor Back Porch    */
+	s32 HSP;		/* Hor Sync Polarity */
+	u32 VTot;	/* Ver Total Time    */
+	u32 VFP;	/* Ver Front Porch   */
+	u32 VST;	/* Ver Sync Time     */
+	u32 VBP;	/* Ver Back Porch    */
+	s32 VSP;		/* Ver Sync Polarity */
+	u32 XRES;	/* X Resolution      */
+	u32 YRES;	/* Y Resolution      */
+	u32 VFREQ;	/* Ver Frequency     */
+	u32 PIXCLK;	/* Pixel Clock       */
+	u32 HCLK;	/* Hor Clock         */
+
+	/* Usefull to hold depth here for Linux */
+	u8 PIXDEPTH;
+
+#ifdef CONFIG_MTRR
+	int mtrr_handle;
+#endif
+};
+
+extern int kyro_dev_init(void);
+extern void kyro_dev_reset(void);
+
+extern unsigned char *kyro_dev_physical_fb_ptr(void);
+extern unsigned char *kyro_dev_virtual_fb_ptr(void);
+extern void *kyro_dev_physical_regs_ptr(void);
+extern void *kyro_dev_virtual_regs_ptr(void);
+extern unsigned int kyro_dev_fb_size(void);
+extern unsigned int kyro_dev_regs_size(void);
+
+extern u32 kyro_dev_overlay_offset(void);
+
+/*
+ * benedict.gaster@superh.com
+ * Added the follow IOCTLS for the creation of overlay services...
+ */
+#define KYRO_IOC_MAGIC 'k'
+
+#define KYRO_IOCTL_OVERLAY_CREATE       _IO(KYRO_IOC_MAGIC, 0)
+#define KYRO_IOCTL_OVERLAY_VIEWPORT_SET _IO(KYRO_IOC_MAGIC, 1)
+#define KYRO_IOCTL_SET_VIDEO_MODE       _IO(KYRO_IOC_MAGIC, 2)
+#define KYRO_IOCTL_UVSTRIDE             _IO(KYRO_IOC_MAGIC, 3)
+#define KYRO_IOCTL_OVERLAY_OFFSET       _IO(KYRO_IOC_MAGIC, 4)
+#define KYRO_IOCTL_STRIDE               _IO(KYRO_IOC_MAGIC, 5)
+
+/*
+ * The follow 3 structures are used to pass data from user space into the kernel
+ * for the creation of overlay surfaces and setting the video mode.
+ */
+typedef struct _OVERLAY_CREATE {
+	u32 ulWidth;
+	u32 ulHeight;
+	int bLinear;
+} overlay_create;
+
+typedef struct _OVERLAY_VIEWPORT_SET {
+	u32 xOrgin;
+	u32 yOrgin;
+	u32 xSize;
+	u32 ySize;
+} overlay_viewport_set;
+
+typedef struct _SET_VIDEO_MODE {
+	u32 ulWidth;
+	u32 ulHeight;
+	u32 ulScan;
+	u8 displayDepth;
+	int bLinear;
+} set_video_mode;
+
+#endif /* _KYRO_H */
diff --git a/include/video/mach64.h b/include/video/mach64.h
new file mode 100644
index 000000000000..09a7f4a7289f
--- /dev/null
+++ b/include/video/mach64.h
@@ -0,0 +1,1377 @@
+/*
+ * ATI Mach64 Register Definitions
+ *
+ * Copyright (C) 1997 Michael AK Tesch
+ *  written with much help from Jon Howell
+ *
+ * Updated for 3D RAGE PRO and 3D RAGE Mobility by Geert Uytterhoeven
+ *	
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * most of the rest of this file comes from ATI sample code
+ */
+#ifndef REGMACH64_H
+#define REGMACH64_H
+
+/* NON-GUI MEMORY MAPPED Registers - expressed in BYTE offsets */
+
+/* Accelerator CRTC */
+#define CRTC_H_TOTAL_DISP	0x0000	/* Dword offset 0_00 */
+#define CRTC2_H_TOTAL_DISP	0x0000	/* Dword offset 0_00 */
+#define CRTC_H_SYNC_STRT_WID	0x0004	/* Dword offset 0_01 */
+#define CRTC2_H_SYNC_STRT_WID	0x0004	/* Dword offset 0_01 */
+#define CRTC_H_SYNC_STRT	0x0004
+#define CRTC2_H_SYNC_STRT	0x0004
+#define CRTC_H_SYNC_DLY		0x0005
+#define CRTC2_H_SYNC_DLY	0x0005
+#define CRTC_H_SYNC_WID		0x0006
+#define CRTC2_H_SYNC_WID	0x0006
+#define CRTC_V_TOTAL_DISP	0x0008	/* Dword offset 0_02 */
+#define CRTC2_V_TOTAL_DISP	0x0008	/* Dword offset 0_02 */
+#define CRTC_V_TOTAL		0x0008
+#define CRTC2_V_TOTAL		0x0008
+#define CRTC_V_DISP		0x000A
+#define CRTC2_V_DISP		0x000A
+#define CRTC_V_SYNC_STRT_WID	0x000C	/* Dword offset 0_03 */
+#define CRTC2_V_SYNC_STRT_WID	0x000C	/* Dword offset 0_03 */
+#define CRTC_V_SYNC_STRT	0x000C
+#define CRTC2_V_SYNC_STRT	0x000C
+#define CRTC_V_SYNC_WID		0x000E
+#define CRTC2_V_SYNC_WID	0x000E
+#define CRTC_VLINE_CRNT_VLINE	0x0010	/* Dword offset 0_04 */
+#define CRTC2_VLINE_CRNT_VLINE	0x0010	/* Dword offset 0_04 */
+#define CRTC_OFF_PITCH		0x0014	/* Dword offset 0_05 */
+#define CRTC_OFFSET		0x0014
+#define CRTC_PITCH		0x0016
+#define CRTC_INT_CNTL		0x0018	/* Dword offset 0_06 */
+#define CRTC_GEN_CNTL		0x001C	/* Dword offset 0_07 */
+#define CRTC_PIX_WIDTH		0x001D
+#define CRTC_FIFO		0x001E
+#define CRTC_EXT_DISP		0x001F
+
+/* Memory Buffer Control */
+#define DSP_CONFIG		0x0020	/* Dword offset 0_08 */
+#define PM_DSP_CONFIG		0x0020	/* Dword offset 0_08 (Mobility Only) */
+#define DSP_ON_OFF		0x0024	/* Dword offset 0_09 */
+#define PM_DSP_ON_OFF		0x0024	/* Dword offset 0_09 (Mobility Only) */
+#define TIMER_CONFIG		0x0028	/* Dword offset 0_0A */
+#define MEM_BUF_CNTL		0x002C	/* Dword offset 0_0B */
+#define MEM_ADDR_CONFIG		0x0034	/* Dword offset 0_0D */
+
+/* Accelerator CRTC */
+#define CRT_TRAP		0x0038	/* Dword offset 0_0E */
+
+#define I2C_CNTL_0		0x003C	/* Dword offset 0_0F */
+
+#define DSTN_CONTROL_LG		0x003C	/* Dword offset 0_0F (LG) */
+
+/* Overscan */
+#define OVR_CLR			0x0040	/* Dword offset 0_10 */
+#define OVR2_CLR		0x0040	/* Dword offset 0_10 */
+#define OVR_WID_LEFT_RIGHT	0x0044	/* Dword offset 0_11 */
+#define OVR2_WID_LEFT_RIGHT	0x0044	/* Dword offset 0_11 */
+#define OVR_WID_TOP_BOTTOM	0x0048	/* Dword offset 0_12 */
+#define OVR2_WID_TOP_BOTTOM	0x0048	/* Dword offset 0_12 */
+
+/* Memory Buffer Control */
+#define VGA_DSP_CONFIG		0x004C	/* Dword offset 0_13 */
+#define PM_VGA_DSP_CONFIG	0x004C	/* Dword offset 0_13 (Mobility Only) */
+#define VGA_DSP_ON_OFF		0x0050	/* Dword offset 0_14 */
+#define PM_VGA_DSP_ON_OFF	0x0050	/* Dword offset 0_14 (Mobility Only) */
+#define DSP2_CONFIG		0x0054	/* Dword offset 0_15 */
+#define PM_DSP2_CONFIG		0x0054	/* Dword offset 0_15 (Mobility Only) */
+#define DSP2_ON_OFF		0x0058	/* Dword offset 0_16 */
+#define PM_DSP2_ON_OFF		0x0058	/* Dword offset 0_16 (Mobility Only) */
+
+/* Accelerator CRTC */
+#define CRTC2_OFF_PITCH		0x005C	/* Dword offset 0_17 */
+
+/* Hardware Cursor */
+#define CUR_CLR0		0x0060	/* Dword offset 0_18 */
+#define CUR2_CLR0		0x0060	/* Dword offset 0_18 */
+#define CUR_CLR1		0x0064	/* Dword offset 0_19 */
+#define CUR2_CLR1		0x0064	/* Dword offset 0_19 */
+#define CUR_OFFSET		0x0068	/* Dword offset 0_1A */
+#define CUR2_OFFSET		0x0068	/* Dword offset 0_1A */
+#define CUR_HORZ_VERT_POSN	0x006C	/* Dword offset 0_1B */
+#define CUR2_HORZ_VERT_POSN	0x006C	/* Dword offset 0_1B */
+#define CUR_HORZ_VERT_OFF	0x0070	/* Dword offset 0_1C */
+#define CUR2_HORZ_VERT_OFF	0x0070	/* Dword offset 0_1C */
+
+#define CONFIG_PANEL_LG		0x0074	/* Dword offset 0_1D (LG) */
+
+/* General I/O Control */
+#define GP_IO			0x0078	/* Dword offset 0_1E */
+
+/* Test and Debug */
+#define HW_DEBUG		0x007C	/* Dword offset 0_1F */
+
+/* Scratch Pad and Test */
+#define SCRATCH_REG0		0x0080	/* Dword offset 0_20 */
+#define SCRATCH_REG1		0x0084	/* Dword offset 0_21 */
+#define SCRATCH_REG2		0x0088	/* Dword offset 0_22 */
+#define SCRATCH_REG3		0x008C	/* Dword offset 0_23 */
+
+/* Clock Control */
+#define CLOCK_CNTL			0x0090	/* Dword offset 0_24 */
+/* CLOCK_CNTL register constants CT LAYOUT */
+#define CLOCK_SEL			0x0f
+#define CLOCK_SEL_INTERNAL		0x03
+#define CLOCK_SEL_EXTERNAL		0x0c
+#define CLOCK_DIV			0x30
+#define CLOCK_DIV1			0x00
+#define CLOCK_DIV2			0x10
+#define CLOCK_DIV4			0x20
+#define CLOCK_STROBE			0x40
+/*  ?					0x80 */
+/* CLOCK_CNTL register constants GX LAYOUT */
+#define CLOCK_BIT			0x04	/* For ICS2595 */
+#define CLOCK_PULSE			0x08	/* For ICS2595 */
+/*#define CLOCK_STROBE			0x40 dito as CT */
+#define CLOCK_DATA			0x80
+
+/* For internal PLL(CT) start */
+#define CLOCK_CNTL_ADDR			CLOCK_CNTL + 1
+#define PLL_WR_EN			0x02
+#define PLL_ADDR			0xfc
+#define CLOCK_CNTL_DATA			CLOCK_CNTL + 2
+#define PLL_DATA			0xff
+/* For internal PLL(CT) end */
+
+#define CLOCK_SEL_CNTL		0x0090	/* Dword offset 0_24 */
+
+/* Configuration */
+#define CONFIG_STAT1		0x0094	/* Dword offset 0_25 */
+#define CONFIG_STAT2		0x0098	/* Dword offset 0_26 */
+
+/* Bus Control */
+#define BUS_CNTL		0x00A0	/* Dword offset 0_28 */
+
+#define LCD_INDEX		0x00A4	/* Dword offset 0_29 */
+#define LCD_DATA		0x00A8	/* Dword offset 0_2A */
+
+#define HFB_PITCH_ADDR_LG	0x00A8	/* Dword offset 0_2A (LG) */
+
+/* Memory Control */
+#define EXT_MEM_CNTL		0x00AC	/* Dword offset 0_2B */
+#define MEM_CNTL		0x00B0	/* Dword offset 0_2C */
+#define MEM_VGA_WP_SEL		0x00B4	/* Dword offset 0_2D */
+#define MEM_VGA_RP_SEL		0x00B8	/* Dword offset 0_2E */
+
+#define I2C_CNTL_1		0x00BC	/* Dword offset 0_2F */
+
+#define LT_GIO_LG		0x00BC	/* Dword offset 0_2F (LG) */
+
+/* DAC Control */
+#define DAC_REGS		0x00C0	/* Dword offset 0_30 */
+#define DAC_W_INDEX		0x00C0	/* Dword offset 0_30 */
+#define DAC_DATA		0x00C1	/* Dword offset 0_30 */
+#define DAC_MASK		0x00C2	/* Dword offset 0_30 */
+#define DAC_R_INDEX		0x00C3	/* Dword offset 0_30 */
+#define DAC_CNTL		0x00C4	/* Dword offset 0_31 */
+
+#define EXT_DAC_REGS		0x00C8	/* Dword offset 0_32 */
+
+#define HORZ_STRETCHING_LG	0x00C8	/* Dword offset 0_32 (LG) */
+#define VERT_STRETCHING_LG	0x00CC	/* Dword offset 0_33 (LG) */
+
+/* Test and Debug */
+#define GEN_TEST_CNTL		0x00D0	/* Dword offset 0_34 */
+
+/* Custom Macros */
+#define CUSTOM_MACRO_CNTL	0x00D4	/* Dword offset 0_35 */
+
+#define LCD_GEN_CNTL_LG		0x00D4	/* Dword offset 0_35 (LG) */
+#define POWER_MANAGEMENT_LG	0x00D8	/* Dword offset 0_36 (LG) */
+
+/* Configuration */
+#define CONFIG_CNTL		0x00DC	/* Dword offset 0_37 (CT, ET, VT) */
+#define CONFIG_CHIP_ID		0x00E0	/* Dword offset 0_38 */
+#define CONFIG_STAT0		0x00E4	/* Dword offset 0_39 */
+
+/* Test and Debug */
+#define CRC_SIG			0x00E8	/* Dword offset 0_3A */
+#define CRC2_SIG		0x00E8	/* Dword offset 0_3A */
+
+
+/* GUI MEMORY MAPPED Registers */
+
+/* Draw Engine Destination Trajectory */
+#define DST_OFF_PITCH		0x0100	/* Dword offset 0_40 */
+#define DST_X			0x0104	/* Dword offset 0_41 */
+#define DST_Y			0x0108	/* Dword offset 0_42 */
+#define DST_Y_X			0x010C	/* Dword offset 0_43 */
+#define DST_WIDTH		0x0110	/* Dword offset 0_44 */
+#define DST_HEIGHT		0x0114	/* Dword offset 0_45 */
+#define DST_HEIGHT_WIDTH	0x0118	/* Dword offset 0_46 */
+#define DST_X_WIDTH		0x011C	/* Dword offset 0_47 */
+#define DST_BRES_LNTH		0x0120	/* Dword offset 0_48 */
+#define DST_BRES_ERR		0x0124	/* Dword offset 0_49 */
+#define DST_BRES_INC		0x0128	/* Dword offset 0_4A */
+#define DST_BRES_DEC		0x012C	/* Dword offset 0_4B */
+#define DST_CNTL		0x0130	/* Dword offset 0_4C */
+#define DST_Y_X__ALIAS__	0x0134	/* Dword offset 0_4D */
+#define TRAIL_BRES_ERR		0x0138	/* Dword offset 0_4E */
+#define TRAIL_BRES_INC		0x013C	/* Dword offset 0_4F */
+#define TRAIL_BRES_DEC		0x0140	/* Dword offset 0_50 */
+#define LEAD_BRES_LNTH		0x0144	/* Dword offset 0_51 */
+#define Z_OFF_PITCH		0x0148	/* Dword offset 0_52 */
+#define Z_CNTL			0x014C	/* Dword offset 0_53 */
+#define ALPHA_TST_CNTL		0x0150	/* Dword offset 0_54 */
+#define SECONDARY_STW_EXP	0x0158	/* Dword offset 0_56 */
+#define SECONDARY_S_X_INC	0x015C	/* Dword offset 0_57 */
+#define SECONDARY_S_Y_INC	0x0160	/* Dword offset 0_58 */
+#define SECONDARY_S_START	0x0164	/* Dword offset 0_59 */
+#define SECONDARY_W_X_INC	0x0168	/* Dword offset 0_5A */
+#define SECONDARY_W_Y_INC	0x016C	/* Dword offset 0_5B */
+#define SECONDARY_W_START	0x0170	/* Dword offset 0_5C */
+#define SECONDARY_T_X_INC	0x0174	/* Dword offset 0_5D */
+#define SECONDARY_T_Y_INC	0x0178	/* Dword offset 0_5E */
+#define SECONDARY_T_START	0x017C	/* Dword offset 0_5F */
+
+/* Draw Engine Source Trajectory */
+#define SRC_OFF_PITCH		0x0180	/* Dword offset 0_60 */
+#define SRC_X			0x0184	/* Dword offset 0_61 */
+#define SRC_Y			0x0188	/* Dword offset 0_62 */
+#define SRC_Y_X			0x018C	/* Dword offset 0_63 */
+#define SRC_WIDTH1		0x0190	/* Dword offset 0_64 */
+#define SRC_HEIGHT1		0x0194	/* Dword offset 0_65 */
+#define SRC_HEIGHT1_WIDTH1	0x0198	/* Dword offset 0_66 */
+#define SRC_X_START		0x019C	/* Dword offset 0_67 */
+#define SRC_Y_START		0x01A0	/* Dword offset 0_68 */
+#define SRC_Y_X_START		0x01A4	/* Dword offset 0_69 */
+#define SRC_WIDTH2		0x01A8	/* Dword offset 0_6A */
+#define SRC_HEIGHT2		0x01AC	/* Dword offset 0_6B */
+#define SRC_HEIGHT2_WIDTH2	0x01B0	/* Dword offset 0_6C */
+#define SRC_CNTL		0x01B4	/* Dword offset 0_6D */
+
+#define SCALE_OFF		0x01C0	/* Dword offset 0_70 */
+#define SECONDARY_SCALE_OFF	0x01C4	/* Dword offset 0_71 */
+
+#define TEX_0_OFF		0x01C0	/* Dword offset 0_70 */
+#define TEX_1_OFF		0x01C4	/* Dword offset 0_71 */
+#define TEX_2_OFF		0x01C8	/* Dword offset 0_72 */
+#define TEX_3_OFF		0x01CC	/* Dword offset 0_73 */
+#define TEX_4_OFF		0x01D0	/* Dword offset 0_74 */
+#define TEX_5_OFF		0x01D4	/* Dword offset 0_75 */
+#define TEX_6_OFF		0x01D8	/* Dword offset 0_76 */
+#define TEX_7_OFF		0x01DC	/* Dword offset 0_77 */
+
+#define SCALE_WIDTH		0x01DC	/* Dword offset 0_77 */
+#define SCALE_HEIGHT		0x01E0	/* Dword offset 0_78 */
+
+#define TEX_8_OFF		0x01E0	/* Dword offset 0_78 */
+#define TEX_9_OFF		0x01E4	/* Dword offset 0_79 */
+#define TEX_10_OFF		0x01E8	/* Dword offset 0_7A */
+#define S_Y_INC			0x01EC	/* Dword offset 0_7B */
+
+#define SCALE_PITCH		0x01EC	/* Dword offset 0_7B */
+#define SCALE_X_INC		0x01F0	/* Dword offset 0_7C */
+
+#define RED_X_INC		0x01F0	/* Dword offset 0_7C */
+#define GREEN_X_INC		0x01F4	/* Dword offset 0_7D */
+
+#define SCALE_Y_INC		0x01F4	/* Dword offset 0_7D */
+#define SCALE_VACC		0x01F8	/* Dword offset 0_7E */
+#define SCALE_3D_CNTL		0x01FC	/* Dword offset 0_7F */
+
+/* Host Data */
+#define HOST_DATA0		0x0200	/* Dword offset 0_80 */
+#define HOST_DATA1		0x0204	/* Dword offset 0_81 */
+#define HOST_DATA2		0x0208	/* Dword offset 0_82 */
+#define HOST_DATA3		0x020C	/* Dword offset 0_83 */
+#define HOST_DATA4		0x0210	/* Dword offset 0_84 */
+#define HOST_DATA5		0x0214	/* Dword offset 0_85 */
+#define HOST_DATA6		0x0218	/* Dword offset 0_86 */
+#define HOST_DATA7		0x021C	/* Dword offset 0_87 */
+#define HOST_DATA8		0x0220	/* Dword offset 0_88 */
+#define HOST_DATA9		0x0224	/* Dword offset 0_89 */
+#define HOST_DATAA		0x0228	/* Dword offset 0_8A */
+#define HOST_DATAB		0x022C	/* Dword offset 0_8B */
+#define HOST_DATAC		0x0230	/* Dword offset 0_8C */
+#define HOST_DATAD		0x0234	/* Dword offset 0_8D */
+#define HOST_DATAE		0x0238	/* Dword offset 0_8E */
+#define HOST_DATAF		0x023C	/* Dword offset 0_8F */
+#define HOST_CNTL		0x0240	/* Dword offset 0_90 */
+
+/* GUI Bus Mastering */
+#define BM_HOSTDATA		0x0244	/* Dword offset 0_91 */
+#define BM_ADDR			0x0248	/* Dword offset 0_92 */
+#define BM_DATA			0x0248	/* Dword offset 0_92 */
+#define BM_GUI_TABLE_CMD	0x024C	/* Dword offset 0_93 */
+
+/* Pattern */
+#define PAT_REG0		0x0280	/* Dword offset 0_A0 */
+#define PAT_REG1		0x0284	/* Dword offset 0_A1 */
+#define PAT_CNTL		0x0288	/* Dword offset 0_A2 */
+
+/* Scissors */
+#define SC_LEFT			0x02A0	/* Dword offset 0_A8 */
+#define SC_RIGHT		0x02A4	/* Dword offset 0_A9 */
+#define SC_LEFT_RIGHT		0x02A8	/* Dword offset 0_AA */
+#define SC_TOP			0x02AC	/* Dword offset 0_AB */
+#define SC_BOTTOM		0x02B0	/* Dword offset 0_AC */
+#define SC_TOP_BOTTOM		0x02B4	/* Dword offset 0_AD */
+
+/* Data Path */
+#define USR1_DST_OFF_PITCH	0x02B8	/* Dword offset 0_AE */
+#define USR2_DST_OFF_PITCH	0x02BC	/* Dword offset 0_AF */
+#define DP_BKGD_CLR		0x02C0	/* Dword offset 0_B0 */
+#define DP_FOG_CLR		0x02C4	/* Dword offset 0_B1 */
+#define DP_FRGD_CLR		0x02C4	/* Dword offset 0_B1 */
+#define DP_WRITE_MASK		0x02C8	/* Dword offset 0_B2 */
+#define DP_CHAIN_MASK		0x02CC	/* Dword offset 0_B3 */
+#define DP_PIX_WIDTH		0x02D0	/* Dword offset 0_B4 */
+#define DP_MIX			0x02D4	/* Dword offset 0_B5 */
+#define DP_SRC			0x02D8	/* Dword offset 0_B6 */
+#define DP_FRGD_CLR_MIX		0x02DC	/* Dword offset 0_B7 */
+#define DP_FRGD_BKGD_CLR	0x02E0	/* Dword offset 0_B8 */
+
+/* Draw Engine Destination Trajectory */
+#define DST_X_Y			0x02E8	/* Dword offset 0_BA */
+#define DST_WIDTH_HEIGHT	0x02EC	/* Dword offset 0_BB */
+
+/* Data Path */
+#define USR_DST_PICTH		0x02F0	/* Dword offset 0_BC */
+#define DP_SET_GUI_ENGINE2	0x02F8	/* Dword offset 0_BE */
+#define DP_SET_GUI_ENGINE	0x02FC	/* Dword offset 0_BF */
+
+/* Color Compare */
+#define CLR_CMP_CLR		0x0300	/* Dword offset 0_C0 */
+#define CLR_CMP_MASK		0x0304	/* Dword offset 0_C1 */
+#define CLR_CMP_CNTL		0x0308	/* Dword offset 0_C2 */
+
+/* Command FIFO */
+#define FIFO_STAT		0x0310	/* Dword offset 0_C4 */
+
+#define CONTEXT_MASK		0x0320	/* Dword offset 0_C8 */
+#define CONTEXT_LOAD_CNTL	0x032C	/* Dword offset 0_CB */
+
+/* Engine Control */
+#define GUI_TRAJ_CNTL		0x0330	/* Dword offset 0_CC */
+
+/* Engine Status/FIFO */
+#define GUI_STAT		0x0338	/* Dword offset 0_CE */
+
+#define TEX_PALETTE_INDEX	0x0340	/* Dword offset 0_D0 */
+#define STW_EXP			0x0344	/* Dword offset 0_D1 */
+#define LOG_MAX_INC		0x0348	/* Dword offset 0_D2 */
+#define S_X_INC			0x034C	/* Dword offset 0_D3 */
+#define S_Y_INC__ALIAS__	0x0350	/* Dword offset 0_D4 */
+
+#define SCALE_PITCH__ALIAS__	0x0350	/* Dword offset 0_D4 */
+
+#define S_START			0x0354	/* Dword offset 0_D5 */
+#define W_X_INC			0x0358	/* Dword offset 0_D6 */
+#define W_Y_INC			0x035C	/* Dword offset 0_D7 */
+#define W_START			0x0360	/* Dword offset 0_D8 */
+#define T_X_INC			0x0364	/* Dword offset 0_D9 */
+#define T_Y_INC			0x0368	/* Dword offset 0_DA */
+
+#define SECONDARY_SCALE_PITCH	0x0368	/* Dword offset 0_DA */
+
+#define T_START			0x036C	/* Dword offset 0_DB */
+#define TEX_SIZE_PITCH		0x0370	/* Dword offset 0_DC */
+#define TEX_CNTL		0x0374	/* Dword offset 0_DD */
+#define SECONDARY_TEX_OFFSET	0x0378	/* Dword offset 0_DE */
+#define TEX_PALETTE		0x037C	/* Dword offset 0_DF */
+
+#define SCALE_PITCH_BOTH	0x0380	/* Dword offset 0_E0 */
+#define SECONDARY_SCALE_OFF_ACC	0x0384	/* Dword offset 0_E1 */
+#define SCALE_OFF_ACC		0x0388	/* Dword offset 0_E2 */
+#define SCALE_DST_Y_X		0x038C	/* Dword offset 0_E3 */
+
+/* Draw Engine Destination Trajectory */
+#define COMPOSITE_SHADOW_ID	0x0398	/* Dword offset 0_E6 */
+
+#define SECONDARY_SCALE_X_INC	0x039C	/* Dword offset 0_E7 */
+
+#define SPECULAR_RED_X_INC	0x039C	/* Dword offset 0_E7 */
+#define SPECULAR_RED_Y_INC	0x03A0	/* Dword offset 0_E8 */
+#define SPECULAR_RED_START	0x03A4	/* Dword offset 0_E9 */
+
+#define SECONDARY_SCALE_HACC	0x03A4	/* Dword offset 0_E9 */
+
+#define SPECULAR_GREEN_X_INC	0x03A8	/* Dword offset 0_EA */
+#define SPECULAR_GREEN_Y_INC	0x03AC	/* Dword offset 0_EB */
+#define SPECULAR_GREEN_START	0x03B0	/* Dword offset 0_EC */
+#define SPECULAR_BLUE_X_INC	0x03B4	/* Dword offset 0_ED */
+#define SPECULAR_BLUE_Y_INC	0x03B8	/* Dword offset 0_EE */
+#define SPECULAR_BLUE_START	0x03BC	/* Dword offset 0_EF */
+
+#define SCALE_X_INC__ALIAS__	0x03C0	/* Dword offset 0_F0 */
+
+#define RED_X_INC__ALIAS__	0x03C0	/* Dword offset 0_F0 */
+#define RED_Y_INC		0x03C4	/* Dword offset 0_F1 */
+#define RED_START		0x03C8	/* Dword offset 0_F2 */
+
+#define SCALE_HACC		0x03C8	/* Dword offset 0_F2 */
+#define SCALE_Y_INC__ALIAS__	0x03CC	/* Dword offset 0_F3 */
+
+#define GREEN_X_INC__ALIAS__	0x03CC	/* Dword offset 0_F3 */
+#define GREEN_Y_INC		0x03D0	/* Dword offset 0_F4 */
+
+#define SECONDARY_SCALE_Y_INC	0x03D0	/* Dword offset 0_F4 */
+#define SECONDARY_SCALE_VACC	0x03D4	/* Dword offset 0_F5 */
+
+#define GREEN_START		0x03D4	/* Dword offset 0_F5 */
+#define BLUE_X_INC		0x03D8	/* Dword offset 0_F6 */
+#define BLUE_Y_INC		0x03DC	/* Dword offset 0_F7 */
+#define BLUE_START		0x03E0	/* Dword offset 0_F8 */
+#define Z_X_INC			0x03E4	/* Dword offset 0_F9 */
+#define Z_Y_INC			0x03E8	/* Dword offset 0_FA */
+#define Z_START			0x03EC	/* Dword offset 0_FB */
+#define ALPHA_X_INC		0x03F0	/* Dword offset 0_FC */
+#define FOG_X_INC		0x03F0	/* Dword offset 0_FC */
+#define ALPHA_Y_INC		0x03F4	/* Dword offset 0_FD */
+#define FOG_Y_INC		0x03F4	/* Dword offset 0_FD */
+#define ALPHA_START		0x03F8	/* Dword offset 0_FE */
+#define FOG_START		0x03F8	/* Dword offset 0_FE */
+
+#define OVERLAY_Y_X_START		0x0400	/* Dword offset 1_00 */
+#define OVERLAY_Y_X_END			0x0404	/* Dword offset 1_01 */
+#define OVERLAY_VIDEO_KEY_CLR		0x0408	/* Dword offset 1_02 */
+#define OVERLAY_VIDEO_KEY_MSK		0x040C	/* Dword offset 1_03 */
+#define OVERLAY_GRAPHICS_KEY_CLR	0x0410	/* Dword offset 1_04 */
+#define OVERLAY_GRAPHICS_KEY_MSK	0x0414	/* Dword offset 1_05 */
+#define OVERLAY_KEY_CNTL		0x0418	/* Dword offset 1_06 */
+
+#define OVERLAY_SCALE_INC	0x0420	/* Dword offset 1_08 */
+#define OVERLAY_SCALE_CNTL	0x0424	/* Dword offset 1_09 */
+#define SCALER_HEIGHT_WIDTH	0x0428	/* Dword offset 1_0A */
+#define SCALER_TEST		0x042C	/* Dword offset 1_0B */
+#define SCALER_BUF0_OFFSET	0x0434	/* Dword offset 1_0D */
+#define SCALER_BUF1_OFFSET	0x0438	/* Dword offset 1_0E */
+#define SCALE_BUF_PITCH		0x043C	/* Dword offset 1_0F */
+
+#define CAPTURE_START_END	0x0440	/* Dword offset 1_10 */
+#define CAPTURE_X_WIDTH		0x0444	/* Dword offset 1_11 */
+#define VIDEO_FORMAT		0x0448	/* Dword offset 1_12 */
+#define VBI_START_END		0x044C	/* Dword offset 1_13 */
+#define CAPTURE_CONFIG		0x0450	/* Dword offset 1_14 */
+#define TRIG_CNTL		0x0454	/* Dword offset 1_15 */
+
+#define OVERLAY_EXCLUSIVE_HORZ	0x0458	/* Dword offset 1_16 */
+#define OVERLAY_EXCLUSIVE_VERT	0x045C	/* Dword offset 1_17 */
+
+#define VAL_WIDTH		0x0460	/* Dword offset 1_18 */
+#define CAPTURE_DEBUG		0x0464	/* Dword offset 1_19 */
+#define VIDEO_SYNC_TEST		0x0468	/* Dword offset 1_1A */
+
+/* GenLocking */
+#define SNAPSHOT_VH_COUNTS	0x0470	/* Dword offset 1_1C */
+#define SNAPSHOT_F_COUNT	0x0474	/* Dword offset 1_1D */
+#define N_VIF_COUNT		0x0478	/* Dword offset 1_1E */
+#define SNAPSHOT_VIF_COUNT	0x047C	/* Dword offset 1_1F */
+
+#define CAPTURE_BUF0_OFFSET	0x0480	/* Dword offset 1_20 */
+#define CAPTURE_BUF1_OFFSET	0x0484	/* Dword offset 1_21 */
+#define CAPTURE_BUF_PITCH	0x0488	/* Dword offset 1_22 */
+
+/* GenLocking */
+#define SNAPSHOT2_VH_COUNTS	0x04B0	/* Dword offset 1_2C */
+#define SNAPSHOT2_F_COUNT	0x04B4	/* Dword offset 1_2D */
+#define N_VIF2_COUNT		0x04B8	/* Dword offset 1_2E */
+#define SNAPSHOT2_VIF_COUNT	0x04BC	/* Dword offset 1_2F */
+
+#define MPP_CONFIG		0x04C0	/* Dword offset 1_30 */
+#define MPP_STROBE_SEQ		0x04C4	/* Dword offset 1_31 */
+#define MPP_ADDR		0x04C8	/* Dword offset 1_32 */
+#define MPP_DATA		0x04CC	/* Dword offset 1_33 */
+#define TVO_CNTL		0x0500	/* Dword offset 1_40 */
+
+/* Test and Debug */
+#define CRT_HORZ_VERT_LOAD	0x0544	/* Dword offset 1_51 */
+
+/* AGP */
+#define AGP_BASE		0x0548	/* Dword offset 1_52 */
+#define AGP_CNTL		0x054C	/* Dword offset 1_53 */
+
+#define SCALER_COLOUR_CNTL	0x0550	/* Dword offset 1_54 */
+#define SCALER_H_COEFF0		0x0554	/* Dword offset 1_55 */
+#define SCALER_H_COEFF1		0x0558	/* Dword offset 1_56 */
+#define SCALER_H_COEFF2		0x055C	/* Dword offset 1_57 */
+#define SCALER_H_COEFF3		0x0560	/* Dword offset 1_58 */
+#define SCALER_H_COEFF4		0x0564	/* Dword offset 1_59 */
+
+/* Command FIFO */
+#define GUI_CMDFIFO_DEBUG	0x0570	/* Dword offset 1_5C */
+#define GUI_CMDFIFO_DATA	0x0574	/* Dword offset 1_5D */
+#define GUI_CNTL		0x0578	/* Dword offset 1_5E */
+
+/* Bus Mastering */
+#define BM_FRAME_BUF_OFFSET	0x0580	/* Dword offset 1_60 */
+#define BM_SYSTEM_MEM_ADDR	0x0584	/* Dword offset 1_61 */
+#define BM_COMMAND		0x0588	/* Dword offset 1_62 */
+#define BM_STATUS		0x058C	/* Dword offset 1_63 */
+#define BM_GUI_TABLE		0x05B8	/* Dword offset 1_6E */
+#define BM_SYSTEM_TABLE		0x05BC	/* Dword offset 1_6F */
+
+#define SCALER_BUF0_OFFSET_U	0x05D4	/* Dword offset 1_75 */
+#define SCALER_BUF0_OFFSET_V	0x05D8	/* Dword offset 1_76 */
+#define SCALER_BUF1_OFFSET_U	0x05DC	/* Dword offset 1_77 */
+#define SCALER_BUF1_OFFSET_V	0x05E0	/* Dword offset 1_78 */
+
+/* Setup Engine */
+#define VERTEX_1_S		0x0640	/* Dword offset 1_90 */
+#define VERTEX_1_T		0x0644	/* Dword offset 1_91 */
+#define VERTEX_1_W		0x0648	/* Dword offset 1_92 */
+#define VERTEX_1_SPEC_ARGB	0x064C	/* Dword offset 1_93 */
+#define VERTEX_1_Z		0x0650	/* Dword offset 1_94 */
+#define VERTEX_1_ARGB		0x0654	/* Dword offset 1_95 */
+#define VERTEX_1_X_Y		0x0658	/* Dword offset 1_96 */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_97 */
+#define VERTEX_2_S		0x0660	/* Dword offset 1_98 */
+#define VERTEX_2_T		0x0664	/* Dword offset 1_99 */
+#define VERTEX_2_W		0x0668	/* Dword offset 1_9A */
+#define VERTEX_2_SPEC_ARGB	0x066C	/* Dword offset 1_9B */
+#define VERTEX_2_Z		0x0670	/* Dword offset 1_9C */
+#define VERTEX_2_ARGB		0x0674	/* Dword offset 1_9D */
+#define VERTEX_2_X_Y		0x0678	/* Dword offset 1_9E */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_9F */
+#define VERTEX_3_S		0x0680	/* Dword offset 1_A0 */
+#define VERTEX_3_T		0x0684	/* Dword offset 1_A1 */
+#define VERTEX_3_W		0x0688	/* Dword offset 1_A2 */
+#define VERTEX_3_SPEC_ARGB	0x068C	/* Dword offset 1_A3 */
+#define VERTEX_3_Z		0x0690	/* Dword offset 1_A4 */
+#define VERTEX_3_ARGB		0x0694	/* Dword offset 1_A5 */
+#define VERTEX_3_X_Y		0x0698	/* Dword offset 1_A6 */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_A7 */
+#define VERTEX_1_S		0x0640	/* Dword offset 1_AB */
+#define VERTEX_1_T		0x0644	/* Dword offset 1_AC */
+#define VERTEX_1_W		0x0648	/* Dword offset 1_AD */
+#define VERTEX_2_S		0x0660	/* Dword offset 1_AE */
+#define VERTEX_2_T		0x0664	/* Dword offset 1_AF */
+#define VERTEX_2_W		0x0668	/* Dword offset 1_B0 */
+#define VERTEX_3_SECONDARY_S	0x06C0	/* Dword offset 1_B0 */
+#define VERTEX_3_S		0x0680	/* Dword offset 1_B1 */
+#define VERTEX_3_SECONDARY_T	0x06C4	/* Dword offset 1_B1 */
+#define VERTEX_3_T		0x0684	/* Dword offset 1_B2 */
+#define VERTEX_3_SECONDARY_W	0x06C8	/* Dword offset 1_B2 */
+#define VERTEX_3_W		0x0688	/* Dword offset 1_B3 */
+#define VERTEX_1_SPEC_ARGB	0x064C	/* Dword offset 1_B4 */
+#define VERTEX_2_SPEC_ARGB	0x066C	/* Dword offset 1_B5 */
+#define VERTEX_3_SPEC_ARGB	0x068C	/* Dword offset 1_B6 */
+#define VERTEX_1_Z		0x0650	/* Dword offset 1_B7 */
+#define VERTEX_2_Z		0x0670	/* Dword offset 1_B8 */
+#define VERTEX_3_Z		0x0690	/* Dword offset 1_B9 */
+#define VERTEX_1_ARGB		0x0654	/* Dword offset 1_BA */
+#define VERTEX_2_ARGB		0x0674	/* Dword offset 1_BB */
+#define VERTEX_3_ARGB		0x0694	/* Dword offset 1_BC */
+#define VERTEX_1_X_Y		0x0658	/* Dword offset 1_BD */
+#define VERTEX_2_X_Y		0x0678	/* Dword offset 1_BE */
+#define VERTEX_3_X_Y		0x0698	/* Dword offset 1_BF */
+#define ONE_OVER_AREA_UC	0x0700	/* Dword offset 1_C0 */
+#define SETUP_CNTL		0x0704	/* Dword offset 1_C1 */
+#define VERTEX_1_SECONDARY_S	0x0728	/* Dword offset 1_CA */
+#define VERTEX_1_SECONDARY_T	0x072C	/* Dword offset 1_CB */
+#define VERTEX_1_SECONDARY_W	0x0730	/* Dword offset 1_CC */
+#define VERTEX_2_SECONDARY_S	0x0734	/* Dword offset 1_CD */
+#define VERTEX_2_SECONDARY_T	0x0738	/* Dword offset 1_CE */
+#define VERTEX_2_SECONDARY_W	0x073C	/* Dword offset 1_CF */
+
+
+#define GTC_3D_RESET_DELAY	3	/* 3D engine reset delay in ms */
+
+/* CRTC control values (mostly CRTC_GEN_CNTL) */
+
+#define CRTC_H_SYNC_NEG		0x00200000
+#define CRTC_V_SYNC_NEG		0x00200000
+
+#define CRTC_DBL_SCAN_EN	0x00000001
+#define CRTC_INTERLACE_EN	0x00000002
+#define CRTC_HSYNC_DIS		0x00000004
+#define CRTC_VSYNC_DIS		0x00000008
+#define CRTC_CSYNC_EN		0x00000010
+#define CRTC_PIX_BY_2_EN	0x00000020	/* unused on RAGE */
+#define CRTC_DISPLAY_DIS	0x00000040
+#define CRTC_VGA_XOVERSCAN	0x00000080
+
+#define CRTC_PIX_WIDTH_MASK	0x00000700
+#define CRTC_PIX_WIDTH_4BPP	0x00000100
+#define CRTC_PIX_WIDTH_8BPP	0x00000200
+#define CRTC_PIX_WIDTH_15BPP	0x00000300
+#define CRTC_PIX_WIDTH_16BPP	0x00000400
+#define CRTC_PIX_WIDTH_24BPP	0x00000500
+#define CRTC_PIX_WIDTH_32BPP	0x00000600
+
+#define CRTC_BYTE_PIX_ORDER	0x00000800
+#define CRTC_PIX_ORDER_MSN_LSN	0x00000000
+#define CRTC_PIX_ORDER_LSN_MSN	0x00000800
+
+#define CRTC_VSYNC_INT_EN	0x00001000ul	/* XC/XL */
+#define CRTC_VSYNC_INT		0x00002000ul	/* XC/XL */
+#define CRTC_FIFO_OVERFILL	0x0000c000ul	/* VT/GT */
+#define CRTC2_VSYNC_INT_EN	0x00004000ul	/* XC/XL */
+#define CRTC2_VSYNC_INT		0x00008000ul	/* XC/XL */
+
+#define CRTC_FIFO_LWM		0x000f0000
+#define CRTC_HVSYNC_IO_DRIVE	0x00010000	/* XC/XL */
+#define CRTC2_PIX_WIDTH		0x000e0000	/* LTPro */
+
+#define CRTC_VGA_128KAP_PAGING	0x00100000
+#define CRTC_VFC_SYNC_TRISTATE	0x00200000	/* VTB/GTB/LT */
+#define CRTC2_EN		0x00200000	/* LTPro */
+#define CRTC_LOCK_REGS		0x00400000
+#define CRTC_SYNC_TRISTATE	0x00800000
+
+#define CRTC_EXT_DISP_EN	0x01000000
+#define CRTC_EN			0x02000000
+#define CRTC_DISP_REQ_EN	0x04000000
+#define CRTC_VGA_LINEAR		0x08000000
+#define CRTC_VSYNC_FALL_EDGE	0x10000000
+#define CRTC_VGA_TEXT_132	0x20000000
+#define CRTC_CNT_EN		0x40000000
+#define CRTC_CUR_B_TEST		0x80000000
+
+#define CRTC_CRNT_VLINE		0x07f00000
+
+#define CRTC_PRESERVED_MASK	0x0001f000
+
+#define CRTC_VBLANK		0x00000001
+#define CRTC_VBLANK_INT_EN	0x00000002
+#define CRTC_VBLANK_INT		0x00000004
+#define CRTC_VBLANK_INT_AK	CRTC_VBLANK_INT
+#define CRTC_VLINE_INT_EN	0x00000008
+#define CRTC_VLINE_INT		0x00000010
+#define CRTC_VLINE_INT_AK	CRTC_VLINE_INT
+#define CRTC_VLINE_SYNC		0x00000020
+#define CRTC_FRAME		0x00000040
+#define SNAPSHOT_INT_EN		0x00000080
+#define SNAPSHOT_INT		0x00000100
+#define SNAPSHOT_INT_AK		SNAPSHOT_INT
+#define I2C_INT_EN		0x00000200
+#define I2C_INT			0x00000400
+#define I2C_INT_AK		I2C_INT
+#define CRTC2_VBLANK		0x00000800
+#define CRTC2_VBLANK_INT_EN	0x00001000
+#define CRTC2_VBLANK_INT	0x00002000
+#define CRTC2_VBLANK_INT_AK	CRTC2_VBLANK_INT
+#define CRTC2_VLINE_INT_EN	0x00004000
+#define CRTC2_VLINE_INT		0x00008000
+#define CRTC2_VLINE_INT_AK	CRTC2_VLINE_INT
+#define CAPBUF0_INT_EN		0x00010000
+#define CAPBUF0_INT		0x00020000
+#define CAPBUF0_INT_AK		CAPBUF0_INT
+#define CAPBUF1_INT_EN		0x00040000
+#define CAPBUF1_INT		0x00080000
+#define CAPBUF1_INT_AK		CAPBUF1_INT
+#define OVERLAY_EOF_INT_EN	0x00100000
+#define OVERLAY_EOF_INT		0x00200000
+#define OVERLAY_EOF_INT_AK	OVERLAY_EOF_INT
+#define ONESHOT_CAP_INT_EN	0x00400000
+#define ONESHOT_CAP_INT		0x00800000
+#define ONESHOT_CAP_INT_AK	ONESHOT_CAP_INT
+#define BUSMASTER_EOL_INT_EN	0x01000000
+#define BUSMASTER_EOL_INT	0x02000000
+#define BUSMASTER_EOL_INT_AK	BUSMASTER_EOL_INT
+#define GP_INT_EN		0x04000000
+#define GP_INT			0x08000000
+#define GP_INT_AK		GP_INT
+#define CRTC2_VLINE_SYNC	0x10000000
+#define SNAPSHOT2_INT_EN	0x20000000
+#define SNAPSHOT2_INT		0x40000000
+#define SNAPSHOT2_INT_AK	SNAPSHOT2_INT
+#define VBLANK_BIT2_INT		0x80000000
+#define VBLANK_BIT2_INT_AK	VBLANK_BIT2_INT
+
+#define CRTC_INT_EN_MASK	(CRTC_VBLANK_INT_EN |	\
+				 CRTC_VLINE_INT_EN |	\
+				 SNAPSHOT_INT_EN |	\
+				 I2C_INT_EN |		\
+				 CRTC2_VBLANK_INT_EN |	\
+				 CRTC2_VLINE_INT_EN |	\
+				 CAPBUF0_INT_EN |	\
+				 CAPBUF1_INT_EN |	\
+				 OVERLAY_EOF_INT_EN |	\
+				 ONESHOT_CAP_INT_EN |	\
+				 BUSMASTER_EOL_INT_EN |	\
+				 GP_INT_EN |		\
+				 SNAPSHOT2_INT_EN)
+
+/* DAC control values */
+
+#define DAC_EXT_SEL_RS2		0x01
+#define DAC_EXT_SEL_RS3		0x02
+#define DAC_8BIT_EN		0x00000100
+#define DAC_PIX_DLY_MASK	0x00000600
+#define DAC_PIX_DLY_0NS		0x00000000
+#define DAC_PIX_DLY_2NS		0x00000200
+#define DAC_PIX_DLY_4NS		0x00000400
+#define DAC_BLANK_ADJ_MASK	0x00001800
+#define DAC_BLANK_ADJ_0		0x00000000
+#define DAC_BLANK_ADJ_1		0x00000800
+#define DAC_BLANK_ADJ_2		0x00001000
+
+/* DAC control values (my source XL/XC Register reference) */
+#define DAC_OUTPUT_MASK         0x00000001  /* 0 - PAL, 1 - NTSC */
+#define DAC_MISTERY_BIT         0x00000002  /* PS2 ? RS343 ?, EXTRA_BRIGHT for GT */
+#define DAC_BLANKING            0x00000004
+#define DAC_CMP_DISABLE         0x00000008
+#define DAC1_CLK_SEL            0x00000010
+#define PALETTE_ACCESS_CNTL     0x00000020
+#define PALETTE2_SNOOP_EN       0x00000040
+#define DAC_CMP_OUTPUT          0x00000080 /* read only */
+/* #define DAC_8BIT_EN is ok */
+#define CRT_SENSE               0x00000800 /* read only */
+#define CRT_DETECTION_ON        0x00001000
+#define DAC_VGA_ADR_EN          0x00002000
+#define DAC_FEA_CON_EN          0x00004000
+#define DAC_PDWN                0x00008000
+#define DAC_TYPE_MASK           0x00070000 /* read only */
+
+
+
+/* Mix control values */
+
+#define MIX_NOT_DST		0x0000
+#define MIX_0			0x0001
+#define MIX_1			0x0002
+#define MIX_DST			0x0003
+#define MIX_NOT_SRC		0x0004
+#define MIX_XOR			0x0005
+#define MIX_XNOR		0x0006
+#define MIX_SRC			0x0007
+#define MIX_NAND		0x0008
+#define MIX_NOT_SRC_OR_DST	0x0009
+#define MIX_SRC_OR_NOT_DST	0x000a
+#define MIX_OR			0x000b
+#define MIX_AND			0x000c
+#define MIX_SRC_AND_NOT_DST	0x000d
+#define MIX_NOT_SRC_AND_DST	0x000e
+#define MIX_NOR			0x000f
+
+/* Maximum engine dimensions */
+#define ENGINE_MIN_X		0
+#define ENGINE_MIN_Y		0
+#define ENGINE_MAX_X		4095
+#define ENGINE_MAX_Y		16383
+
+/* Mach64 engine bit constants - these are typically ORed together */
+
+/* BUS_CNTL register constants */
+#define BUS_APER_REG_DIS	0x00000010
+#define BUS_FIFO_ERR_ACK	0x00200000
+#define BUS_HOST_ERR_ACK	0x00800000
+
+/* GEN_TEST_CNTL register constants */
+#define GEN_OVR_OUTPUT_EN	0x20
+#define HWCURSOR_ENABLE		0x80
+#define GUI_ENGINE_ENABLE	0x100
+#define BLOCK_WRITE_ENABLE	0x200
+
+/* DSP_CONFIG register constants */
+#define DSP_XCLKS_PER_QW	0x00003fff
+#define DSP_LOOP_LATENCY	0x000f0000
+#define DSP_PRECISION		0x00700000
+
+/* DSP_ON_OFF register constants */
+#define DSP_OFF			0x000007ff
+#define DSP_ON			0x07ff0000
+#define VGA_DSP_OFF		DSP_OFF
+#define VGA_DSP_ON		DSP_ON
+#define VGA_DSP_XCLKS_PER_QW	DSP_XCLKS_PER_QW
+
+/* PLL register indices and fields */
+#define MPLL_CNTL		0x00
+#define PLL_PC_GAIN		0x07
+#define PLL_VC_GAIN		0x18
+#define PLL_DUTY_CYC		0xE0
+#define VPLL_CNTL		0x01
+#define PLL_REF_DIV		0x02
+#define PLL_GEN_CNTL		0x03
+#define PLL_OVERRIDE		0x01	/* PLL_SLEEP */
+#define PLL_MCLK_RST		0x02	/* PLL_MRESET */
+#define OSC_EN			0x04
+#define EXT_CLK_EN		0x08
+#define FORCE_DCLK_TRI_STATE	0x08    /* VT4 -> */
+#define MCLK_SRC_SEL		0x70
+#define EXT_CLK_CNTL		0x80
+#define DLL_PWDN		0x80    /* VT4 -> */
+#define MCLK_FB_DIV		0x04
+#define PLL_VCLK_CNTL		0x05
+#define PLL_VCLK_SRC_SEL	0x03
+#define PLL_VCLK_RST		0x04
+#define PLL_VCLK_INVERT		0x08
+#define VCLK_POST_DIV		0x06
+#define VCLK0_POST		0x03
+#define VCLK1_POST		0x0C
+#define VCLK2_POST		0x30
+#define VCLK3_POST		0xC0
+#define VCLK0_FB_DIV		0x07
+#define VCLK1_FB_DIV		0x08
+#define VCLK2_FB_DIV		0x09
+#define VCLK3_FB_DIV		0x0A
+#define PLL_EXT_CNTL		0x0B
+#define PLL_XCLK_MCLK_RATIO	0x03
+#define PLL_XCLK_SRC_SEL	0x07
+#define PLL_MFB_TIMES_4_2B	0x08
+#define PLL_VCLK0_XDIV		0x10
+#define PLL_VCLK1_XDIV		0x20
+#define PLL_VCLK2_XDIV		0x40
+#define PLL_VCLK3_XDIV		0x80
+#define DLL_CNTL		0x0C
+#define DLL1_CNTL		0x0C
+#define VFC_CNTL		0x0D
+#define PLL_TEST_CNTL		0x0E
+#define PLL_TEST_COUNT		0x0F
+#define LVDS_CNTL0		0x10
+#define LVDS_CNTL1		0x11
+#define AGP1_CNTL		0x12
+#define AGP2_CNTL		0x13
+#define DLL2_CNTL		0x14
+#define SCLK_FB_DIV		0x15
+#define SPLL_CNTL1		0x16
+#define SPLL_CNTL2		0x17
+#define APLL_STRAPS		0x18
+#define EXT_VPLL_CNTL		0x19
+#define EXT_VPLL_EN		0x04
+#define EXT_VPLL_VGA_EN		0x08
+#define EXT_VPLL_INSYNC		0x10
+#define EXT_VPLL_REF_DIV	0x1A
+#define EXT_VPLL_FB_DIV		0x1B
+#define EXT_VPLL_MSB		0x1C
+#define HTOTAL_CNTL		0x1D
+#define BYTE_CLK_CNTL		0x1E
+#define TV_PLL_CNTL1		0x1F
+#define TV_PLL_CNTL2		0x20
+#define TV_PLL_CNTL		0x21
+#define EXT_TV_PLL		0x22
+#define V2PLL_CNTL		0x23
+#define PLL_V2CLK_CNTL		0x24
+#define EXT_V2PLL_REF_DIV	0x25
+#define EXT_V2PLL_FB_DIV	0x26
+#define EXT_V2PLL_MSB		0x27
+#define HTOTAL2_CNTL		0x28
+#define PLL_YCLK_CNTL		0x29
+#define PM_DYN_CLK_CNTL		0x2A
+
+/* CONFIG_CNTL register constants */
+#define APERTURE_4M_ENABLE	1
+#define APERTURE_8M_ENABLE	2
+#define VGA_APERTURE_ENABLE	4
+
+/* CONFIG_STAT0 register constants (GX, CX) */
+#define CFG_BUS_TYPE		0x00000007
+#define CFG_MEM_TYPE		0x00000038
+#define CFG_INIT_DAC_TYPE	0x00000e00
+
+/* CONFIG_STAT0 register constants (CT, ET, VT) */
+#define CFG_MEM_TYPE_xT		0x00000007
+
+#define ISA			0
+#define EISA			1
+#define LOCAL_BUS		6
+#define PCI			7
+
+/* Memory types for GX, CX */
+#define DRAMx4			0
+#define VRAMx16			1
+#define VRAMx16ssr		2
+#define DRAMx16			3
+#define GraphicsDRAMx16		4
+#define EnhancedVRAMx16		5
+#define EnhancedVRAMx16ssr	6
+
+/* Memory types for CT, ET, VT, GT */
+#define DRAM			1
+#define EDO			2
+#define PSEUDO_EDO		3
+#define SDRAM			4
+#define SGRAM			5
+#define WRAM			6
+
+#define DAC_INTERNAL		0x00
+#define DAC_IBMRGB514		0x01
+#define DAC_ATI68875		0x02
+#define DAC_TVP3026_A		0x72
+#define DAC_BT476		0x03
+#define DAC_BT481		0x04
+#define DAC_ATT20C491		0x14
+#define DAC_SC15026		0x24
+#define DAC_MU9C1880		0x34
+#define DAC_IMSG174		0x44
+#define DAC_ATI68860_B		0x05
+#define DAC_ATI68860_C		0x15
+#define DAC_TVP3026_B		0x75
+#define DAC_STG1700		0x06
+#define DAC_ATT498		0x16
+#define DAC_STG1702		0x07
+#define DAC_SC15021		0x17
+#define DAC_ATT21C498		0x27
+#define DAC_STG1703		0x37
+#define DAC_CH8398		0x47
+#define DAC_ATT20C408		0x57
+
+#define CLK_ATI18818_0		0
+#define CLK_ATI18818_1		1
+#define CLK_STG1703		2
+#define CLK_CH8398		3
+#define CLK_INTERNAL		4
+#define CLK_ATT20C408		5
+#define CLK_IBMRGB514		6
+
+/* MEM_CNTL register constants */
+#define MEM_SIZE_ALIAS		0x00000007
+#define MEM_SIZE_512K		0x00000000
+#define MEM_SIZE_1M		0x00000001
+#define MEM_SIZE_2M		0x00000002
+#define MEM_SIZE_4M		0x00000003
+#define MEM_SIZE_6M		0x00000004
+#define MEM_SIZE_8M		0x00000005
+#define MEM_SIZE_ALIAS_GTB	0x0000000F
+#define MEM_SIZE_2M_GTB		0x00000003
+#define MEM_SIZE_4M_GTB		0x00000007
+#define MEM_SIZE_6M_GTB		0x00000009
+#define MEM_SIZE_8M_GTB		0x0000000B
+#define MEM_BNDRY		0x00030000
+#define MEM_BNDRY_0K		0x00000000
+#define MEM_BNDRY_256K		0x00010000
+#define MEM_BNDRY_512K		0x00020000
+#define MEM_BNDRY_1M		0x00030000
+#define MEM_BNDRY_EN		0x00040000
+
+#define ONE_MB			0x100000
+/* ATI PCI constants */
+#define PCI_ATI_VENDOR_ID	0x1002
+
+
+/* CONFIG_CHIP_ID register constants */
+#define CFG_CHIP_TYPE		0x0000FFFF
+#define CFG_CHIP_CLASS		0x00FF0000
+#define CFG_CHIP_REV		0xFF000000
+#define CFG_CHIP_MAJOR		0x07000000
+#define CFG_CHIP_FND_ID		0x38000000
+#define CFG_CHIP_MINOR		0xC0000000
+
+
+/* Chip IDs read from CONFIG_CHIP_ID */
+
+/* mach64GX family */
+#define GX_CHIP_ID	0xD7	/* mach64GX (ATI888GX00) */
+#define CX_CHIP_ID	0x57	/* mach64CX (ATI888CX00) */
+
+#define GX_PCI_ID	0x4758	/* mach64GX (ATI888GX00) */
+#define CX_PCI_ID	0x4358	/* mach64CX (ATI888CX00) */
+
+/* mach64CT family */
+#define CT_CHIP_ID	0x4354	/* mach64CT (ATI264CT) */
+#define ET_CHIP_ID	0x4554	/* mach64ET (ATI264ET) */
+
+/* mach64CT family / mach64VT class */
+#define VT_CHIP_ID	0x5654	/* mach64VT (ATI264VT) */
+#define VU_CHIP_ID	0x5655	/* mach64VTB (ATI264VTB) */
+#define VV_CHIP_ID	0x5656	/* mach64VT4 (ATI264VT4) */
+
+/* mach64CT family / mach64GT (3D RAGE) class */
+#define LB_CHIP_ID	0x4c42	/* RAGE LT PRO, AGP */
+#define LD_CHIP_ID	0x4c44	/* RAGE LT PRO */
+#define LG_CHIP_ID	0x4c47	/* RAGE LT */
+#define LI_CHIP_ID	0x4c49	/* RAGE LT PRO */
+#define LP_CHIP_ID	0x4c50	/* RAGE LT PRO */
+#define LT_CHIP_ID	0x4c54	/* RAGE LT */
+
+/* mach64CT family / (Rage XL) class */
+#define GR_CHIP_ID	0x4752	/* RAGE XL, BGA, PCI33 */
+#define GS_CHIP_ID	0x4753	/* RAGE XL, PQFP, PCI33 */
+#define GM_CHIP_ID	0x474d	/* RAGE XL, BGA, AGP 1x,2x */
+#define GN_CHIP_ID	0x474e	/* RAGE XL, PQFP,AGP 1x,2x */
+#define GO_CHIP_ID	0x474f	/* RAGE XL, BGA, PCI66 */
+#define GL_CHIP_ID	0x474c	/* RAGE XL, PQFP, PCI66 */
+
+#define IS_XL(id) ((id)==GR_CHIP_ID || (id)==GS_CHIP_ID || \
+		   (id)==GM_CHIP_ID || (id)==GN_CHIP_ID || \
+		   (id)==GO_CHIP_ID || (id)==GL_CHIP_ID)
+
+#define GT_CHIP_ID	0x4754	/* RAGE (GT) */
+#define GU_CHIP_ID	0x4755	/* RAGE II/II+ (GTB) */
+#define GV_CHIP_ID	0x4756	/* RAGE IIC, PCI */
+#define GW_CHIP_ID	0x4757	/* RAGE IIC, AGP */
+#define GZ_CHIP_ID	0x475a	/* RAGE IIC, AGP */
+#define GB_CHIP_ID	0x4742	/* RAGE PRO, BGA, AGP 1x and 2x */
+#define GD_CHIP_ID	0x4744	/* RAGE PRO, BGA, AGP 1x only */
+#define GI_CHIP_ID	0x4749	/* RAGE PRO, BGA, PCI33 only */
+#define GP_CHIP_ID	0x4750	/* RAGE PRO, PQFP, PCI33, full 3D */
+#define GQ_CHIP_ID	0x4751	/* RAGE PRO, PQFP, PCI33, limited 3D */
+
+#define LM_CHIP_ID	0x4c4d	/* RAGE Mobility AGP, full function */
+#define LN_CHIP_ID	0x4c4e	/* RAGE Mobility AGP */
+#define LR_CHIP_ID	0x4c52	/* RAGE Mobility PCI, full function */
+#define LS_CHIP_ID	0x4c53	/* RAGE Mobility PCI */
+
+#define IS_MOBILITY(id) ((id)==LM_CHIP_ID || (id)==LN_CHIP_ID || \
+			(id)==LR_CHIP_ID || (id)==LS_CHIP_ID)
+/* Mach64 major ASIC revisions */
+#define MACH64_ASIC_NEC_VT_A3		0x08
+#define MACH64_ASIC_NEC_VT_A4		0x48
+#define MACH64_ASIC_SGS_VT_A4		0x40
+#define MACH64_ASIC_SGS_VT_B1S1		0x01
+#define MACH64_ASIC_SGS_GT_B1S1		0x01
+#define MACH64_ASIC_SGS_GT_B1S2		0x41
+#define MACH64_ASIC_UMC_GT_B2U1		0x1a
+#define MACH64_ASIC_UMC_GT_B2U2		0x5a
+#define MACH64_ASIC_UMC_VT_B2U3		0x9a
+#define MACH64_ASIC_UMC_GT_B2U3		0x9a
+#define MACH64_ASIC_UMC_R3B_D_P_A1	0x1b
+#define MACH64_ASIC_UMC_R3B_D_P_A2	0x5b
+#define MACH64_ASIC_UMC_R3B_D_P_A3	0x1c
+#define MACH64_ASIC_UMC_R3B_D_P_A4	0x5c
+
+/* Mach64 foundries */
+#define MACH64_FND_SGS		0
+#define MACH64_FND_NEC		1
+#define MACH64_FND_UMC		3
+
+/* Mach64 chip types */
+#define MACH64_UNKNOWN		0
+#define MACH64_GX		1
+#define MACH64_CX		2
+#define MACH64_CT		3Restore
+#define MACH64_ET		4
+#define MACH64_VT		5
+#define MACH64_GT		6
+
+/* DST_CNTL register constants */
+#define DST_X_RIGHT_TO_LEFT	0
+#define DST_X_LEFT_TO_RIGHT	1
+#define DST_Y_BOTTOM_TO_TOP	0
+#define DST_Y_TOP_TO_BOTTOM	2
+#define DST_X_MAJOR		0
+#define DST_Y_MAJOR		4
+#define DST_X_TILE		8
+#define DST_Y_TILE		0x10
+#define DST_LAST_PEL		0x20
+#define DST_POLYGON_ENABLE	0x40
+#define DST_24_ROTATION_ENABLE	0x80
+
+/* SRC_CNTL register constants */
+#define SRC_PATTERN_ENABLE		1
+#define SRC_ROTATION_ENABLE		2
+#define SRC_LINEAR_ENABLE		4
+#define SRC_BYTE_ALIGN			8
+#define SRC_LINE_X_RIGHT_TO_LEFT	0
+#define SRC_LINE_X_LEFT_TO_RIGHT	0x10
+
+/* HOST_CNTL register constants */
+#define HOST_BYTE_ALIGN		1
+
+/* GUI_TRAJ_CNTL register constants */
+#define PAT_MONO_8x8_ENABLE	0x01000000
+#define PAT_CLR_4x2_ENABLE	0x02000000
+#define PAT_CLR_8x1_ENABLE	0x04000000
+
+/* DP_CHAIN_MASK register constants */
+#define DP_CHAIN_4BPP		0x8888
+#define DP_CHAIN_7BPP		0xD2D2
+#define DP_CHAIN_8BPP		0x8080
+#define DP_CHAIN_8BPP_RGB	0x9292
+#define DP_CHAIN_15BPP		0x4210
+#define DP_CHAIN_16BPP		0x8410
+#define DP_CHAIN_24BPP		0x8080
+#define DP_CHAIN_32BPP		0x8080
+
+/* DP_PIX_WIDTH register constants */
+#define DST_1BPP		0x0
+#define DST_4BPP		0x1
+#define DST_8BPP		0x2
+#define DST_15BPP		0x3
+#define DST_16BPP		0x4
+#define DST_24BPP		0x5
+#define DST_32BPP		0x6
+#define DST_MASK		0xF
+#define SRC_1BPP		0x000
+#define SRC_4BPP		0x100
+#define SRC_8BPP		0x200
+#define SRC_15BPP		0x300
+#define SRC_16BPP		0x400
+#define SRC_24BPP		0x500
+#define SRC_32BPP		0x600
+#define SRC_MASK		0xF00
+#define DP_HOST_TRIPLE_EN	0x2000
+#define HOST_1BPP		0x00000
+#define HOST_4BPP		0x10000
+#define HOST_8BPP		0x20000
+#define HOST_15BPP		0x30000
+#define HOST_16BPP		0x40000
+#define HOST_24BPP		0x50000
+#define HOST_32BPP		0x60000
+#define HOST_MASK		0xF0000
+#define BYTE_ORDER_MSB_TO_LSB	0
+#define BYTE_ORDER_LSB_TO_MSB	0x1000000
+#define BYTE_ORDER_MASK		0x1000000
+
+/* DP_MIX register constants */
+#define BKGD_MIX_NOT_D			0
+#define BKGD_MIX_ZERO			1
+#define BKGD_MIX_ONE			2
+#define BKGD_MIX_D			3
+#define BKGD_MIX_NOT_S			4
+#define BKGD_MIX_D_XOR_S		5
+#define BKGD_MIX_NOT_D_XOR_S		6
+#define BKGD_MIX_S			7
+#define BKGD_MIX_NOT_D_OR_NOT_S		8
+#define BKGD_MIX_D_OR_NOT_S		9
+#define BKGD_MIX_NOT_D_OR_S		10
+#define BKGD_MIX_D_OR_S			11
+#define BKGD_MIX_D_AND_S		12
+#define BKGD_MIX_NOT_D_AND_S		13
+#define BKGD_MIX_D_AND_NOT_S		14
+#define BKGD_MIX_NOT_D_AND_NOT_S	15
+#define BKGD_MIX_D_PLUS_S_DIV2		0x17
+#define FRGD_MIX_NOT_D			0
+#define FRGD_MIX_ZERO			0x10000
+#define FRGD_MIX_ONE			0x20000
+#define FRGD_MIX_D			0x30000
+#define FRGD_MIX_NOT_S			0x40000
+#define FRGD_MIX_D_XOR_S		0x50000
+#define FRGD_MIX_NOT_D_XOR_S		0x60000
+#define FRGD_MIX_S			0x70000
+#define FRGD_MIX_NOT_D_OR_NOT_S		0x80000
+#define FRGD_MIX_D_OR_NOT_S		0x90000
+#define FRGD_MIX_NOT_D_OR_S		0xa0000
+#define FRGD_MIX_D_OR_S			0xb0000
+#define FRGD_MIX_D_AND_S		0xc0000
+#define FRGD_MIX_NOT_D_AND_S		0xd0000
+#define FRGD_MIX_D_AND_NOT_S		0xe0000
+#define FRGD_MIX_NOT_D_AND_NOT_S	0xf0000
+#define FRGD_MIX_D_PLUS_S_DIV2		0x170000
+
+/* DP_SRC register constants */
+#define BKGD_SRC_BKGD_CLR	0
+#define BKGD_SRC_FRGD_CLR	1
+#define BKGD_SRC_HOST		2
+#define BKGD_SRC_BLIT		3
+#define BKGD_SRC_PATTERN	4
+#define FRGD_SRC_BKGD_CLR	0
+#define FRGD_SRC_FRGD_CLR	0x100
+#define FRGD_SRC_HOST		0x200
+#define FRGD_SRC_BLIT		0x300
+#define FRGD_SRC_PATTERN	0x400
+#define MONO_SRC_ONE		0
+#define MONO_SRC_PATTERN	0x10000
+#define MONO_SRC_HOST		0x20000
+#define MONO_SRC_BLIT		0x30000
+
+/* CLR_CMP_CNTL register constants */
+#define COMPARE_FALSE		0
+#define COMPARE_TRUE		1
+#define COMPARE_NOT_EQUAL	4
+#define COMPARE_EQUAL		5
+#define COMPARE_DESTINATION	0
+#define COMPARE_SOURCE		0x1000000
+
+/* FIFO_STAT register constants */
+#define FIFO_ERR		0x80000000
+
+/* CONTEXT_LOAD_CNTL constants */
+#define CONTEXT_NO_LOAD			0
+#define CONTEXT_LOAD			0x10000
+#define CONTEXT_LOAD_AND_DO_FILL	0x20000
+#define CONTEXT_LOAD_AND_DO_LINE	0x30000
+#define CONTEXT_EXECUTE			0
+#define CONTEXT_CMD_DISABLE		0x80000000
+
+/* GUI_STAT register constants */
+#define ENGINE_IDLE			0
+#define ENGINE_BUSY			1
+#define SCISSOR_LEFT_FLAG		0x10
+#define SCISSOR_RIGHT_FLAG		0x20
+#define SCISSOR_TOP_FLAG		0x40
+#define SCISSOR_BOTTOM_FLAG		0x80
+
+/* ATI VGA Extended Regsiters */
+#define sioATIEXT		0x1ce
+#define bioATIEXT		0x3ce
+
+#define ATI2E			0xae
+#define ATI32			0xb2
+#define ATI36			0xb6
+
+/* VGA Graphics Controller Registers */
+#define R_GENMO			0x3cc
+#define VGAGRA			0x3ce
+#define GRA06			0x06
+
+/* VGA Seququencer Registers */
+#define VGASEQ			0x3c4
+#define SEQ02			0x02
+#define SEQ04			0x04
+
+#define MACH64_MAX_X		ENGINE_MAX_X
+#define MACH64_MAX_Y		ENGINE_MAX_Y
+
+#define INC_X			0x0020
+#define INC_Y			0x0080
+
+#define RGB16_555		0x0000
+#define RGB16_565		0x0040
+#define RGB16_655		0x0080
+#define RGB16_664		0x00c0
+
+#define POLY_TEXT_TYPE		0x0001
+#define IMAGE_TEXT_TYPE		0x0002
+#define TEXT_TYPE_8_BIT		0x0004
+#define TEXT_TYPE_16_BIT	0x0008
+#define POLY_TEXT_TYPE_8	(POLY_TEXT_TYPE | TEXT_TYPE_8_BIT)
+#define IMAGE_TEXT_TYPE_8	(IMAGE_TEXT_TYPE | TEXT_TYPE_8_BIT)
+#define POLY_TEXT_TYPE_16	(POLY_TEXT_TYPE | TEXT_TYPE_16_BIT)
+#define IMAGE_TEXT_TYPE_16	(IMAGE_TEXT_TYPE | TEXT_TYPE_16_BIT)
+
+#define MACH64_NUM_CLOCKS	16
+#define MACH64_NUM_FREQS	50
+
+/* Power Management register constants (LT & LT Pro) */
+#define PWR_MGT_ON		0x00000001
+#define PWR_MGT_MODE_MASK	0x00000006
+#define AUTO_PWR_UP		0x00000008
+#define USE_F32KHZ		0x00000400
+#define TRISTATE_MEM_EN		0x00000800
+#define SELF_REFRESH		0x00000080
+#define PWR_BLON		0x02000000
+#define STANDBY_NOW		0x10000000
+#define SUSPEND_NOW		0x20000000
+#define PWR_MGT_STATUS_MASK	0xC0000000
+#define PWR_MGT_STATUS_SUSPEND	0x80000000
+
+/* PM Mode constants  */
+#define PWR_MGT_MODE_PIN	0x00000000
+#define PWR_MGT_MODE_REG	0x00000002
+#define PWR_MGT_MODE_TIMER	0x00000004
+#define PWR_MGT_MODE_PCI	0x00000006
+
+/* LCD registers (LT Pro) */
+
+/* LCD Index register */
+#define LCD_INDEX_MASK		0x0000003F
+#define LCD_DISPLAY_DIS		0x00000100
+#define LCD_SRC_SEL		0x00000200
+#define CRTC2_DISPLAY_DIS	0x00000400
+
+/* LCD register indices */
+#define CONFIG_PANEL		0x00
+#define LCD_GEN_CNTL		0x01
+#define DSTN_CONTROL		0x02
+#define HFB_PITCH_ADDR		0x03
+#define HORZ_STRETCHING		0x04
+#define VERT_STRETCHING		0x05
+#define EXT_VERT_STRETCH	0x06
+#define LT_GIO			0x07
+#define POWER_MANAGEMENT	0x08
+#define ZVGPIO			0x09
+#define ICON_CLR0		0x0A
+#define ICON_CLR1		0x0B
+#define ICON_OFFSET		0x0C
+#define ICON_HORZ_VERT_POSN	0x0D
+#define ICON_HORZ_VERT_OFF	0x0E
+#define ICON2_CLR0		0x0F
+#define ICON2_CLR1		0x10
+#define ICON2_OFFSET		0x11
+#define ICON2_HORZ_VERT_POSN	0x12
+#define ICON2_HORZ_VERT_OFF	0x13
+#define LCD_MISC_CNTL		0x14
+#define APC_CNTL		0x1C
+#define POWER_MANAGEMENT_2	0x1D
+#define ALPHA_BLENDING		0x25
+#define PORTRAIT_GEN_CNTL	0x26
+#define APC_CTRL_IO		0x27
+#define TEST_IO			0x28
+#define TEST_OUTPUTS		0x29
+#define DP1_MEM_ACCESS		0x2A
+#define DP0_MEM_ACCESS		0x2B
+#define DP0_DEBUG_A		0x2C
+#define DP0_DEBUG_B		0x2D
+#define DP1_DEBUG_A		0x2E
+#define DP1_DEBUG_B		0x2F
+#define DPCTRL_DEBUG_A		0x30
+#define DPCTRL_DEBUG_B		0x31
+#define MEMBLK_DEBUG		0x32
+#define APC_LUT_AB		0x33
+#define APC_LUT_CD		0x34
+#define APC_LUT_EF		0x35
+#define APC_LUT_GH		0x36
+#define APC_LUT_IJ		0x37
+#define APC_LUT_KL		0x38
+#define APC_LUT_MN		0x39
+#define APC_LUT_OP		0x3A
+
+/* Values in LCD_GEN_CTRL */
+#define CRT_ON                          0x00000001ul
+#define LCD_ON                          0x00000002ul
+#define HORZ_DIVBY2_EN                  0x00000004ul
+#define DONT_DS_ICON                    0x00000008ul
+#define LOCK_8DOT                       0x00000010ul
+#define ICON_ENABLE                     0x00000020ul
+#define DONT_SHADOW_VPAR                0x00000040ul
+#define V2CLK_PM_EN                     0x00000080ul
+#define RST_FM                          0x00000100ul
+#define DISABLE_PCLK_RESET              0x00000200ul	/* XC/XL */
+#define DIS_HOR_CRT_DIVBY2              0x00000400ul
+#define SCLK_SEL                        0x00000800ul
+#define SCLK_DELAY                      0x0000f000ul
+#define TVCLK_PM_EN                     0x00010000ul
+#define VCLK_DAC_PM_EN                  0x00020000ul
+#define VCLK_LCD_OFF                    0x00040000ul
+#define SELECT_WAIT_4MS                 0x00080000ul
+#define XTALIN_PM_EN                    0x00080000ul	/* XC/XL */
+#define V2CLK_DAC_PM_EN                 0x00100000ul
+#define LVDS_EN                         0x00200000ul
+#define LVDS_PLL_EN                     0x00400000ul
+#define LVDS_PLL_RESET                  0x00800000ul
+#define LVDS_RESERVED_BITS              0x07000000ul
+#define CRTC_RW_SELECT                  0x08000000ul	/* LTPro */
+#define USE_SHADOWED_VEND               0x10000000ul
+#define USE_SHADOWED_ROWCUR             0x20000000ul
+#define SHADOW_EN                       0x40000000ul
+#define SHADOW_RW_EN                  	0x80000000ul
+
+#define LCD_SET_PRIMARY_MASK            0x07FFFBFBul
+
+/* Values in HORZ_STRETCHING */
+#define HORZ_STRETCH_BLEND		0x00000ffful
+#define HORZ_STRETCH_RATIO		0x0000fffful
+#define HORZ_STRETCH_LOOP		0x00070000ul
+#define HORZ_STRETCH_LOOP09		0x00000000ul
+#define HORZ_STRETCH_LOOP11		0x00010000ul
+#define HORZ_STRETCH_LOOP12		0x00020000ul
+#define HORZ_STRETCH_LOOP14		0x00030000ul
+#define HORZ_STRETCH_LOOP15		0x00040000ul
+/*	?				0x00050000ul */
+/*	?				0x00060000ul */
+/*	?				0x00070000ul */
+/*	?				0x00080000ul */
+#define HORZ_PANEL_SIZE			0x0ff00000ul	/* XC/XL */
+/*	?				0x10000000ul */
+#define AUTO_HORZ_RATIO			0x20000000ul	/* XC/XL */
+#define HORZ_STRETCH_MODE		0x40000000ul
+#define HORZ_STRETCH_EN			0x80000000ul
+
+/* Values in VERT_STRETCHING */
+#define VERT_STRETCH_RATIO0		0x000003fful
+#define VERT_STRETCH_RATIO1		0x000ffc00ul
+#define VERT_STRETCH_RATIO2		0x3ff00000ul
+#define VERT_STRETCH_USE0		0x40000000ul
+#define VERT_STRETCH_EN			0x80000000ul
+
+/* Values in EXT_VERT_STRETCH */
+#define VERT_STRETCH_RATIO3		0x000003fful
+#define FORCE_DAC_DATA			0x000000fful
+#define FORCE_DAC_DATA_SEL		0x00000300ul
+#define VERT_STRETCH_MODE		0x00000400ul
+#define VERT_PANEL_SIZE			0x003ff800ul
+#define AUTO_VERT_RATIO			0x00400000ul
+#define USE_AUTO_FP_POS			0x00800000ul
+#define USE_AUTO_LCD_VSYNC		0x01000000ul
+/*	?				0xfe000000ul */
+
+/* Values in LCD_MISC_CNTL */
+#define BIAS_MOD_LEVEL_MASK		0x0000ff00
+#define BIAS_MOD_LEVEL_SHIFT		8
+#define BLMOD_EN			0x00010000
+#define BIASMOD_EN			0x00020000
+
+#endif				/* REGMACH64_H */
diff --git a/include/video/maxinefb.h b/include/video/maxinefb.h
new file mode 100644
index 000000000000..6aeb4acca2bd
--- /dev/null
+++ b/include/video/maxinefb.h
@@ -0,0 +1,38 @@
+/*
+ *      linux/drivers/video/maxinefb.h
+ *
+ *      DECstation 5000/xx onboard framebuffer support, Copyright (C) 1999 by
+ *      Michael Engel <engel@unix-ag.org> and Karsten Merker <merker@guug.de>
+ *      This file is subject to the terms and conditions of the GNU General
+ *      Public License.  See the file COPYING in the main directory of this
+ *      archive for more details.
+ */
+
+#include <asm/addrspace.h>
+
+/*
+ * IMS332 video controller register base address
+ */
+#define MAXINEFB_IMS332_ADDRESS		KSEG1ADDR(0x1c140000)
+
+/*
+ * Begin of DECstation 5000/xx onboard framebuffer memory, default resolution
+ * is 1024x768x8
+ */
+#define DS5000_xx_ONBOARD_FBMEM_START	KSEG1ADDR(0x0a000000)
+
+/*
+ *      The IMS 332 video controller used in the DECstation 5000/xx series
+ *      uses 32 bits wide registers; the following defines declare the
+ *      register numbers, to get the real offset, these have to be multiplied
+ *      by four.
+ */
+
+#define IMS332_REG_CURSOR_RAM           0x200	/* hardware cursor bitmap */
+
+/*
+ * The color palette entries have the form 0x00BBGGRR
+ */
+#define IMS332_REG_COLOR_PALETTE        0x100	/* color palette, 256 entries */
+#define IMS332_REG_CURSOR_COLOR_PALETTE	0x0a1	/* cursor color palette, */
+						/* 3 entries             */
diff --git a/include/video/neomagic.h b/include/video/neomagic.h
new file mode 100644
index 000000000000..bdaee70868dd
--- /dev/null
+++ b/include/video/neomagic.h
@@ -0,0 +1,207 @@
+/*
+ * linux/include/video/neo_reg.h -- NeoMagic Framebuffer Driver
+ *
+ * Copyright (c) 2001  Denis Oliver Kropp <dok@convergence.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#define NEO_BS0_BLT_BUSY        0x00000001
+#define NEO_BS0_FIFO_AVAIL      0x00000002
+#define NEO_BS0_FIFO_PEND       0x00000004
+
+#define NEO_BC0_DST_Y_DEC       0x00000001
+#define NEO_BC0_X_DEC           0x00000002
+#define NEO_BC0_SRC_TRANS       0x00000004
+#define NEO_BC0_SRC_IS_FG       0x00000008
+#define NEO_BC0_SRC_Y_DEC       0x00000010
+#define NEO_BC0_FILL_PAT        0x00000020
+#define NEO_BC0_SRC_MONO        0x00000040
+#define NEO_BC0_SYS_TO_VID      0x00000080
+
+#define NEO_BC1_DEPTH8          0x00000100
+#define NEO_BC1_DEPTH16         0x00000200
+#define NEO_BC1_X_320           0x00000400
+#define NEO_BC1_X_640           0x00000800
+#define NEO_BC1_X_800           0x00000c00
+#define NEO_BC1_X_1024          0x00001000
+#define NEO_BC1_X_1152          0x00001400
+#define NEO_BC1_X_1280          0x00001800
+#define NEO_BC1_X_1600          0x00001c00
+#define NEO_BC1_DST_TRANS       0x00002000
+#define NEO_BC1_MSTR_BLT        0x00004000
+#define NEO_BC1_FILTER_Z        0x00008000
+
+#define NEO_BC2_WR_TR_DST       0x00800000
+
+#define NEO_BC3_SRC_XY_ADDR     0x01000000
+#define NEO_BC3_DST_XY_ADDR     0x02000000
+#define NEO_BC3_CLIP_ON         0x04000000
+#define NEO_BC3_FIFO_EN         0x08000000
+#define NEO_BC3_BLT_ON_ADDR     0x10000000
+#define NEO_BC3_SKIP_MAPPING    0x80000000
+
+#define NEO_MODE1_DEPTH8        0x0100
+#define NEO_MODE1_DEPTH16       0x0200
+#define NEO_MODE1_DEPTH24       0x0300
+#define NEO_MODE1_X_320         0x0400
+#define NEO_MODE1_X_640         0x0800
+#define NEO_MODE1_X_800         0x0c00
+#define NEO_MODE1_X_1024        0x1000
+#define NEO_MODE1_X_1152        0x1400
+#define NEO_MODE1_X_1280        0x1800
+#define NEO_MODE1_X_1600        0x1c00
+#define NEO_MODE1_BLT_ON_ADDR   0x2000
+
+/* These are offseted in MMIO space by par->CursorOff */
+#define NEOREG_CURSCNTL		0x00
+#define NEOREG_CURSX		0x04
+#define NEOREG_CURSY		0x08
+#define NEOREG_CURSBGCOLOR	0x0C
+#define NEOREG_CURSFGCOLOR	0x10
+#define NEOREG_CURSMEMPOS	0x14
+
+#define NEO_CURS_DISABLE	0x00000000
+#define NEO_CURS_ENABLE		0x00000001
+#define NEO_ICON64_ENABLE	0x00000008
+#define NEO_ICON128_ENABLE	0x0000000C
+#define NEO_ICON_BLANK		0x00000010
+
+#define NEO_GR01_SUPPRESS_VSYNC 0x10
+#define NEO_GR01_SUPPRESS_HSYNC 0x20
+
+#ifdef __KERNEL__
+
+#ifdef NEOFB_DEBUG
+# define DBG(x)		printk (KERN_DEBUG "neofb: %s\n", (x));
+#else
+# define DBG(x)
+#endif
+
+#define PCI_CHIP_NM2070 0x0001
+#define PCI_CHIP_NM2090 0x0002
+#define PCI_CHIP_NM2093 0x0003
+#define PCI_CHIP_NM2097 0x0083
+#define PCI_CHIP_NM2160 0x0004
+#define PCI_CHIP_NM2200 0x0005
+#define PCI_CHIP_NM2230 0x0025
+#define PCI_CHIP_NM2360 0x0006
+#define PCI_CHIP_NM2380 0x0016
+
+
+struct xtimings {
+	unsigned int pixclock;
+	unsigned int HDisplay;
+	unsigned int HSyncStart;
+	unsigned int HSyncEnd;
+	unsigned int HTotal;
+	unsigned int VDisplay;
+	unsigned int VSyncStart;
+	unsigned int VSyncEnd;
+	unsigned int VTotal;
+	unsigned int sync;
+	int dblscan;
+	int interlaced;
+};
+
+
+/* --------------------------------------------------------------------- */
+
+typedef volatile struct {
+	__u32 bltStat;
+	__u32 bltCntl;
+	__u32 xpColor;
+	__u32 fgColor;
+	__u32 bgColor;
+	__u32 pitch;
+	__u32 clipLT;
+	__u32 clipRB;
+	__u32 srcBitOffset;
+	__u32 srcStart;
+	__u32 reserved0;
+	__u32 dstStart;
+	__u32 xyExt;
+
+	__u32 reserved1[19];
+
+	__u32 pageCntl;
+	__u32 pageBase;
+	__u32 postBase;
+	__u32 postPtr;
+	__u32 dataPtr;
+} Neo2200;
+
+#define MMIO_SIZE 0x200000
+
+#define NEO_EXT_CR_MAX 0x85
+#define NEO_EXT_GR_MAX 0xC7
+
+struct neofb_par {
+	struct vgastate state;
+	atomic_t ref_count;
+
+	unsigned char MiscOutReg;	/* Misc */
+	unsigned char CRTC[25];		/* Crtc Controller */
+	unsigned char Sequencer[5];	/* Video Sequencer */
+	unsigned char Graphics[9];	/* Video Graphics */
+	unsigned char Attribute[21];	/* Video Atribute */
+
+	unsigned char GeneralLockReg;
+	unsigned char ExtCRTDispAddr;
+	unsigned char ExtCRTOffset;
+	unsigned char SysIfaceCntl1;
+	unsigned char SysIfaceCntl2;
+	unsigned char ExtColorModeSelect;
+	unsigned char biosMode;
+
+	unsigned char PanelDispCntlReg1;
+	unsigned char PanelDispCntlReg2;
+	unsigned char PanelDispCntlReg3;
+	unsigned char PanelVertCenterReg1;
+	unsigned char PanelVertCenterReg2;
+	unsigned char PanelVertCenterReg3;
+	unsigned char PanelVertCenterReg4;
+	unsigned char PanelVertCenterReg5;
+	unsigned char PanelHorizCenterReg1;
+	unsigned char PanelHorizCenterReg2;
+	unsigned char PanelHorizCenterReg3;
+	unsigned char PanelHorizCenterReg4;
+	unsigned char PanelHorizCenterReg5;
+
+	int ProgramVCLK;
+	unsigned char VCLK3NumeratorLow;
+	unsigned char VCLK3NumeratorHigh;
+	unsigned char VCLK3Denominator;
+	unsigned char VerticalExt;
+
+#ifdef CONFIG_MTRR
+	int mtrr;
+#endif
+	u8 __iomem *mmio_vbase;
+	u8 cursorOff;
+	u8 *cursorPad;		/* Must die !! */
+
+	Neo2200 __iomem *neo2200;
+
+	/* Panels size */
+	int NeoPanelWidth;
+	int NeoPanelHeight;
+
+	int maxClock;
+
+	int pci_burst;
+	int lcd_stretch;
+	int internal_display;
+	int external_display;
+	int libretto;
+};
+
+typedef struct {
+	int x_res;
+	int y_res;
+	int mode;
+} biosMode;
+
+#endif
diff --git a/include/video/newport.h b/include/video/newport.h
new file mode 100644
index 000000000000..812dac5b55f4
--- /dev/null
+++ b/include/video/newport.h
@@ -0,0 +1,582 @@
+/* $Id: newport.h,v 1.5 1999/08/04 06:01:51 ulfc Exp $
+ *
+ * newport.h: Defines and register layout for NEWPORT graphics
+ *            hardware.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * 
+ * Ulf Carlsson - Compability with the IRIX structures added
+ */
+
+#ifndef _SGI_NEWPORT_H
+#define _SGI_NEWPORT_H
+
+
+typedef volatile unsigned int npireg_t;
+
+union npfloat {
+	volatile float flt;
+	npireg_t       word;
+};
+
+typedef union npfloat npfreg_t;
+
+union np_dcb {
+	npireg_t byword;
+	struct { volatile unsigned short s0, s1; } byshort;
+	struct { volatile unsigned char b0, b1, b2, b3; } bybytes;
+};
+
+struct newport_rexregs {
+	npireg_t drawmode1;      /* GL extra mode bits */
+	
+#define DM1_PLANES         0x00000007
+#define    DM1_NOPLANES    0x00000000
+#define    DM1_RGBPLANES   0x00000001
+#define    DM1_RGBAPLANES  0x00000002
+#define    DM1_OLAYPLANES  0x00000004
+#define    DM1_PUPPLANES   0x00000005
+#define    DM1_CIDPLANES   0x00000006
+	
+#define NPORT_DMODE1_DDMASK      0x00000018
+#define NPORT_DMODE1_DD4         0x00000000
+#define NPORT_DMODE1_DD8         0x00000008
+#define NPORT_DMODE1_DD12        0x00000010
+#define NPORT_DMODE1_DD24        0x00000018
+#define NPORT_DMODE1_DSRC        0x00000020
+#define NPORT_DMODE1_YFLIP       0x00000040
+#define NPORT_DMODE1_RWPCKD      0x00000080
+#define NPORT_DMODE1_HDMASK      0x00000300
+#define NPORT_DMODE1_HD4         0x00000000
+#define NPORT_DMODE1_HD8         0x00000100
+#define NPORT_DMODE1_HD12        0x00000200
+#define NPORT_DMODE1_HD32        0x00000300
+#define NPORT_DMODE1_RWDBL       0x00000400
+#define NPORT_DMODE1_ESWAP       0x00000800 /* Endian swap */
+#define NPORT_DMODE1_CCMASK      0x00007000
+#define NPORT_DMODE1_CCLT        0x00001000
+#define NPORT_DMODE1_CCEQ        0x00002000
+#define NPORT_DMODE1_CCGT        0x00004000
+#define NPORT_DMODE1_RGBMD       0x00008000
+#define NPORT_DMODE1_DENAB       0x00010000 /* Dither enable */
+#define NPORT_DMODE1_FCLR        0x00020000 /* Fast clear */
+#define NPORT_DMODE1_BENAB       0x00040000 /* Blend enable */
+#define NPORT_DMODE1_SFMASK      0x00380000
+#define NPORT_DMODE1_SF0         0x00000000
+#define NPORT_DMODE1_SF1         0x00080000
+#define NPORT_DMODE1_SFDC        0x00100000
+#define NPORT_DMODE1_SFMDC       0x00180000
+#define NPORT_DMODE1_SFSA        0x00200000
+#define NPORT_DMODE1_SFMSA       0x00280000
+#define NPORT_DMODE1_DFMASK      0x01c00000
+#define NPORT_DMODE1_DF0         0x00000000
+#define NPORT_DMODE1_DF1         0x00400000
+#define NPORT_DMODE1_DFSC        0x00800000
+#define NPORT_DMODE1_DFMSC       0x00c00000
+#define NPORT_DMODE1_DFSA        0x01000000
+#define NPORT_DMODE1_DFMSA       0x01400000
+#define NPORT_DMODE1_BBENAB      0x02000000 /* Back blend enable */
+#define NPORT_DMODE1_PFENAB      0x04000000 /* Pre-fetch enable */
+#define NPORT_DMODE1_ABLEND      0x08000000 /* Alpha blend */
+#define NPORT_DMODE1_LOMASK      0xf0000000
+#define NPORT_DMODE1_LOZERO      0x00000000
+#define NPORT_DMODE1_LOAND       0x10000000
+#define NPORT_DMODE1_LOANDR      0x20000000
+#define NPORT_DMODE1_LOSRC       0x30000000
+#define NPORT_DMODE1_LOANDI      0x40000000
+#define NPORT_DMODE1_LODST       0x50000000
+#define NPORT_DMODE1_LOXOR       0x60000000
+#define NPORT_DMODE1_LOOR        0x70000000
+#define NPORT_DMODE1_LONOR       0x80000000
+#define NPORT_DMODE1_LOXNOR      0x90000000
+#define NPORT_DMODE1_LONDST      0xa0000000
+#define NPORT_DMODE1_LOORR       0xb0000000
+#define NPORT_DMODE1_LONSRC      0xc0000000
+#define NPORT_DMODE1_LOORI       0xd0000000
+#define NPORT_DMODE1_LONAND      0xe0000000
+#define NPORT_DMODE1_LOONE       0xf0000000
+
+	npireg_t drawmode0;      /* REX command register */
+
+	/* These bits define the graphics opcode being performed. */
+#define NPORT_DMODE0_OPMASK   0x00000003 /* Opcode mask */
+#define NPORT_DMODE0_NOP      0x00000000 /* No operation */
+#define NPORT_DMODE0_RD       0x00000001 /* Read operation */
+#define NPORT_DMODE0_DRAW     0x00000002 /* Draw operation */
+#define NPORT_DMODE0_S2S      0x00000003 /* Screen to screen operation */
+
+	/* The following decide what addressing mode(s) are to be used */
+#define NPORT_DMODE0_AMMASK   0x0000001c /* Address mode mask */
+#define NPORT_DMODE0_SPAN     0x00000000 /* Spanning address mode */
+#define NPORT_DMODE0_BLOCK    0x00000004 /* Block address mode */
+#define NPORT_DMODE0_ILINE    0x00000008 /* Iline address mode */
+#define NPORT_DMODE0_FLINE    0x0000000c /* Fline address mode */
+#define NPORT_DMODE0_ALINE    0x00000010 /* Aline address mode */
+#define NPORT_DMODE0_TLINE    0x00000014 /* Tline address mode */
+#define NPORT_DMODE0_BLINE    0x00000018 /* Bline address mode */
+
+	/* And now some misc. operation control bits. */
+#define NPORT_DMODE0_DOSETUP  0x00000020
+#define NPORT_DMODE0_CHOST    0x00000040
+#define NPORT_DMODE0_AHOST    0x00000080
+#define NPORT_DMODE0_STOPX    0x00000100
+#define NPORT_DMODE0_STOPY    0x00000200
+#define NPORT_DMODE0_SK1ST    0x00000400
+#define NPORT_DMODE0_SKLST    0x00000800
+#define NPORT_DMODE0_ZPENAB   0x00001000
+#define NPORT_DMODE0_LISPENAB 0x00002000
+#define NPORT_DMODE0_LISLST   0x00004000
+#define NPORT_DMODE0_L32      0x00008000
+#define NPORT_DMODE0_ZOPQ     0x00010000
+#define NPORT_DMODE0_LISOPQ   0x00020000
+#define NPORT_DMODE0_SHADE    0x00040000
+#define NPORT_DMODE0_LRONLY   0x00080000
+#define NPORT_DMODE0_XYOFF    0x00100000
+#define NPORT_DMODE0_CLAMP    0x00200000
+#define NPORT_DMODE0_ENDPF    0x00400000
+#define NPORT_DMODE0_YSTR     0x00800000
+
+	npireg_t lsmode;      /* Mode for line stipple ops */
+	npireg_t lspattern;   /* Pattern for line stipple ops */
+	npireg_t lspatsave;   /* Backup save pattern */
+	npireg_t zpattern;    /* Pixel zpattern */
+	npireg_t colorback;   /* Background color */
+	npireg_t colorvram;   /* Clear color for fast vram */
+	npireg_t alpharef;    /* Reference value for afunctions */
+	unsigned int pad0;
+	npireg_t smask0x;     /* Window GL relative screen mask 0 */
+	npireg_t smask0y;     /* Window GL relative screen mask 0 */
+	npireg_t _setup;
+	npireg_t _stepz;
+	npireg_t _lsrestore;
+	npireg_t _lssave;
+
+	unsigned int _pad1[0x30];
+
+	/* Iterators, full state for context switch */
+	npfreg_t _xstart;	/* X-start point (current) */
+	npfreg_t _ystart;	/* Y-start point (current) */
+	npfreg_t _xend;		/* x-end point */
+	npfreg_t _yend;		/* y-end point */
+	npireg_t xsave;		/* copy of xstart integer value for BLOCk addressing MODE */
+	npireg_t xymove;	/* x.y offset from xstart, ystart for relative operations */
+	npfreg_t bresd;
+	npfreg_t bress1;
+	npireg_t bresoctinc1;
+	volatile int bresrndinc2;
+	npireg_t brese1;
+	npireg_t bress2;
+	npireg_t aweight0;
+	npireg_t aweight1;
+	npfreg_t xstartf;
+	npfreg_t ystartf;
+	npfreg_t xendf;
+	npfreg_t yendf;
+	npireg_t xstarti;
+	npfreg_t xendf1;
+	npireg_t xystarti;
+	npireg_t xyendi;
+	npireg_t xstartendi;
+
+	unsigned int _unused2[0x29];
+
+	npfreg_t colorred;
+	npfreg_t coloralpha;
+	npfreg_t colorgrn;
+	npfreg_t colorblue;
+	npfreg_t slopered;
+	npfreg_t slopealpha;
+	npfreg_t slopegrn;
+	npfreg_t slopeblue;
+	npireg_t wrmask;
+	npireg_t colori;
+	npfreg_t colorx;
+	npfreg_t slopered1;
+	npireg_t hostrw0;
+	npireg_t hostrw1;
+	npireg_t dcbmode;
+#define NPORT_DMODE_WMASK   0x00000003
+#define NPORT_DMODE_W4      0x00000000
+#define NPORT_DMODE_W1      0x00000001
+#define NPORT_DMODE_W2      0x00000002
+#define NPORT_DMODE_W3      0x00000003
+#define NPORT_DMODE_EDPACK  0x00000004
+#define NPORT_DMODE_ECINC   0x00000008
+#define NPORT_DMODE_CMASK   0x00000070
+#define NPORT_DMODE_AMASK   0x00000780
+#define NPORT_DMODE_AVC2    0x00000000
+#define NPORT_DMODE_ACMALL  0x00000080
+#define NPORT_DMODE_ACM0    0x00000100
+#define NPORT_DMODE_ACM1    0x00000180
+#define NPORT_DMODE_AXMALL  0x00000200
+#define NPORT_DMODE_AXM0    0x00000280
+#define NPORT_DMODE_AXM1    0x00000300
+#define NPORT_DMODE_ABT     0x00000380
+#define NPORT_DMODE_AVCC1   0x00000400
+#define NPORT_DMODE_AVAB1   0x00000480
+#define NPORT_DMODE_ALG3V0  0x00000500
+#define NPORT_DMODE_A1562   0x00000580
+#define NPORT_DMODE_ESACK   0x00000800
+#define NPORT_DMODE_EASACK  0x00001000
+#define NPORT_DMODE_CWMASK  0x0003e000
+#define NPORT_DMODE_CHMASK  0x007c0000
+#define NPORT_DMODE_CSMASK  0x0f800000
+#define NPORT_DMODE_SENDIAN 0x10000000
+
+	unsigned int _unused3;
+
+	union np_dcb dcbdata0;
+	npireg_t dcbdata1;
+};
+
+struct newport_cregs {
+	npireg_t smask1x;
+	npireg_t smask1y;
+	npireg_t smask2x;
+	npireg_t smask2y;
+	npireg_t smask3x;
+	npireg_t smask3y;
+	npireg_t smask4x;
+	npireg_t smask4y;
+	npireg_t topscan;
+	npireg_t xywin;
+	npireg_t clipmode;
+#define NPORT_CMODE_SM0   0x00000001
+#define NPORT_CMODE_SM1   0x00000002
+#define NPORT_CMODE_SM2   0x00000004
+#define NPORT_CMODE_SM3   0x00000008
+#define NPORT_CMODE_SM4   0x00000010
+#define NPORT_CMODE_CMSK  0x00001e00
+
+	unsigned int _unused0;
+	unsigned int config;
+#define NPORT_CFG_G32MD   0x00000001
+#define NPORT_CFG_BWIDTH  0x00000002
+#define NPORT_CFG_ERCVR   0x00000004
+#define NPORT_CFG_BDMSK   0x00000078
+#define NPORT_CFG_BFAINT  0x00000080
+#define NPORT_CFG_GDMSK   0x00001f80
+#define NPORT_CFG_GD0     0x00000100
+#define NPORT_CFG_GD1     0x00000200
+#define NPORT_CFG_GD2     0x00000400
+#define NPORT_CFG_GD3     0x00000800
+#define NPORT_CFG_GD4     0x00001000
+#define NPORT_CFG_GFAINT  0x00002000
+#define NPORT_CFG_TOMSK   0x0001c000
+#define NPORT_CFG_VRMSK   0x000e0000
+#define NPORT_CFG_FBTYP   0x00100000
+
+	npireg_t _unused1;
+	npireg_t status;
+#define NPORT_STAT_VERS   0x00000007
+#define NPORT_STAT_GBUSY  0x00000008
+#define NPORT_STAT_BBUSY  0x00000010
+#define NPORT_STAT_VRINT  0x00000020
+#define NPORT_STAT_VIDINT 0x00000040
+#define NPORT_STAT_GLMSK  0x00001f80
+#define NPORT_STAT_BLMSK  0x0007e000
+#define NPORT_STAT_BFIRQ  0x00080000
+#define NPORT_STAT_GFIRQ  0x00100000
+
+	npireg_t ustatus;
+	npireg_t dcbreset;
+};
+
+struct newport_regs {
+	struct newport_rexregs set;
+	unsigned int _unused0[0x16e];
+	struct newport_rexregs go;
+	unsigned int _unused1[0x22e];
+	struct newport_cregs cset;
+	unsigned int _unused2[0x1ef];
+	struct newport_cregs cgo;
+};
+
+typedef struct {
+	unsigned int drawmode1;
+	unsigned int drawmode0;
+	unsigned int lsmode;   
+	unsigned int lspattern;
+	unsigned int lspatsave;
+	unsigned int zpattern; 
+	unsigned int colorback;
+	unsigned int colorvram;
+	unsigned int alpharef; 
+	unsigned int smask0x;  
+	unsigned int smask0y;  
+	unsigned int _xstart;  
+	unsigned int _ystart;  
+	unsigned int _xend;    
+	unsigned int _yend;    
+	unsigned int xsave;    
+	unsigned int xymove;   
+	unsigned int bresd;    
+	unsigned int bress1;   
+	unsigned int bresoctinc1;
+	unsigned int bresrndinc2;
+	unsigned int brese1;     
+	unsigned int bress2;     
+	
+	unsigned int aweight0;    
+	unsigned int aweight1;    
+	unsigned int colorred;    
+	unsigned int coloralpha;  
+	unsigned int colorgrn;    
+	unsigned int colorblue;   
+	unsigned int slopered;    
+	unsigned int slopealpha;  
+	unsigned int slopegrn;    
+	unsigned int slopeblue;   
+	unsigned int wrmask;      
+	unsigned int hostrw0;     
+	unsigned int hostrw1;     
+	
+        /* configregs */
+	
+	unsigned int smask1x;    
+	unsigned int smask1y;    
+	unsigned int smask2x;    
+	unsigned int smask2y;    
+	unsigned int smask3x;    
+	unsigned int smask3y;    
+	unsigned int smask4x;    
+	unsigned int smask4y;    
+	unsigned int topscan;    
+	unsigned int xywin;      
+	unsigned int clipmode;   
+	unsigned int config;     
+	
+        /* dcb registers */
+	unsigned int dcbmode;   
+	unsigned int dcbdata0;  
+	unsigned int dcbdata1;
+} newport_ctx;
+
+/* Reading/writing VC2 registers. */
+#define VC2_REGADDR_INDEX      0x00000000
+#define VC2_REGADDR_IREG       0x00000010
+#define VC2_REGADDR_RAM        0x00000030
+#define VC2_PROTOCOL           (NPORT_DMODE_EASACK | 0x00800000 | 0x00040000)
+
+#define VC2_VLINET_ADDR        0x000
+#define VC2_VFRAMET_ADDR       0x400
+#define VC2_CGLYPH_ADDR        0x500
+
+/* Now the Indexed registers of the VC2. */
+#define VC2_IREG_VENTRY        0x00
+#define VC2_IREG_CENTRY        0x01
+#define VC2_IREG_CURSX         0x02
+#define VC2_IREG_CURSY         0x03
+#define VC2_IREG_CCURSX        0x04
+#define VC2_IREG_DENTRY        0x05
+#define VC2_IREG_SLEN          0x06
+#define VC2_IREG_RADDR         0x07
+#define VC2_IREG_VFPTR         0x08
+#define VC2_IREG_VLSPTR        0x09
+#define VC2_IREG_VLIR          0x0a
+#define VC2_IREG_VLCTR         0x0b
+#define VC2_IREG_CTPTR         0x0c
+#define VC2_IREG_WCURSY        0x0d
+#define VC2_IREG_DFPTR         0x0e
+#define VC2_IREG_DLTPTR        0x0f
+#define VC2_IREG_CONTROL       0x10
+#define VC2_IREG_CONFIG        0x20
+
+extern __inline__ void newport_vc2_set(struct newport_regs *regs, unsigned char vc2ireg,
+				   unsigned short val)
+{
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W3 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	regs->set.dcbdata0.byword = (vc2ireg << 24) | (val << 8);
+}
+
+extern __inline__ unsigned short newport_vc2_get(struct newport_regs *regs,
+					     unsigned char vc2ireg)
+{
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W1 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	regs->set.dcbdata0.bybytes.b3 = vc2ireg;
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_IREG | NPORT_DMODE_W2 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	return regs->set.dcbdata0.byshort.s1;
+}
+
+/* VC2 Control register bits */
+#define VC2_CTRL_EVIRQ     0x0001
+#define VC2_CTRL_EDISP     0x0002
+#define VC2_CTRL_EVIDEO    0x0004
+#define VC2_CTRL_EDIDS     0x0008
+#define VC2_CTRL_ECURS     0x0010
+#define VC2_CTRL_EGSYNC    0x0020
+#define VC2_CTRL_EILACE    0x0040
+#define VC2_CTRL_ECDISP    0x0080
+#define VC2_CTRL_ECCURS    0x0100
+#define VC2_CTRL_ECG64     0x0200
+#define VC2_CTRL_GLSEL     0x0400
+
+/* Controlling the color map on NEWPORT. */
+#define NCMAP_REGADDR_AREG   0x00000000
+#define NCMAP_REGADDR_ALO    0x00000000
+#define NCMAP_REGADDR_AHI    0x00000010
+#define NCMAP_REGADDR_PBUF   0x00000020
+#define NCMAP_REGADDR_CREG   0x00000030
+#define NCMAP_REGADDR_SREG   0x00000040
+#define NCMAP_REGADDR_RREG   0x00000060
+#define NCMAP_PROTOCOL       (0x00008000 | 0x00040000 | 0x00800000)
+
+static __inline__ void newport_cmap_setaddr(struct newport_regs *regs,
+					unsigned short addr)
+{
+	regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
+			   NPORT_DMODE_SENDIAN | NPORT_DMODE_ECINC |
+			   NCMAP_REGADDR_AREG | NPORT_DMODE_W2);
+	regs->set.dcbdata0.byshort.s1 = addr;
+	regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
+			   NCMAP_REGADDR_PBUF | NPORT_DMODE_W3);
+}
+
+static __inline__ void newport_cmap_setrgb(struct newport_regs *regs,
+				       unsigned char red,
+				       unsigned char green,
+				       unsigned char blue)
+{
+	regs->set.dcbdata0.byword =
+		(red << 24) |
+		(green << 16) |
+		(blue << 8);
+}
+
+/* Miscellaneous NEWPORT routines. */
+#define BUSY_TIMEOUT 100000
+static __inline__ int newport_wait(struct newport_regs *regs)
+{
+	int t = BUSY_TIMEOUT;
+
+	while (t--)
+		if (!(regs->cset.status & NPORT_STAT_GBUSY))
+			break;
+	return !t;
+}
+
+static __inline__ int newport_bfwait(struct newport_regs *regs)
+{
+	int t = BUSY_TIMEOUT;
+
+	while (t--)
+		if(!(regs->cset.status & NPORT_STAT_BBUSY))
+			break;
+	return !t;
+}
+
+/*
+ * DCBMODE register defines:
+ */
+
+/* Width of the data being transferred for each DCBDATA[01] word */
+#define DCB_DATAWIDTH_4 0x0
+#define DCB_DATAWIDTH_1 0x1
+#define DCB_DATAWIDTH_2 0x2
+#define DCB_DATAWIDTH_3 0x3
+
+/* If set, all of DCBDATA will be moved, otherwise only DATAWIDTH bytes */
+#define DCB_ENDATAPACK   (1 << 2)
+
+/* Enables DCBCRS auto increment after each DCB transfer */
+#define DCB_ENCRSINC     (1 << 3)
+
+/* shift for accessing the control register select address (DBCCRS, 3 bits) */
+#define DCB_CRS_SHIFT    4
+
+/* DCBADDR (4 bits): display bus slave address */
+#define DCB_ADDR_SHIFT   7
+#define DCB_VC2          (0 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP_ALL     (1 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP0        (2 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP1        (3 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP_ALL     (4 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP0        (5 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP1        (6 <<  DCB_ADDR_SHIFT)
+#define DCB_BT445        (7 <<  DCB_ADDR_SHIFT)
+#define DCB_VCC1         (8 <<  DCB_ADDR_SHIFT)
+#define DCB_VAB1         (9 <<  DCB_ADDR_SHIFT)
+#define DCB_LG3_BDVERS0  (10 << DCB_ADDR_SHIFT)
+#define DCB_LG3_ICS1562  (11 << DCB_ADDR_SHIFT)
+#define DCB_RESERVED     (15 << DCB_ADDR_SHIFT)
+
+/* DCB protocol ack types */
+#define DCB_ENSYNCACK    (1 << 11)
+#define DCB_ENASYNCACK   (1 << 12)
+
+#define DCB_CSWIDTH_SHIFT 13
+#define DCB_CSHOLD_SHIFT  18
+#define DCB_CSSETUP_SHIFT 23
+
+/* XMAP9 specific defines */
+/*   XMAP9 -- registers as seen on the DCBMODE register*/
+#   define XM9_CRS_CONFIG            (0 << DCB_CRS_SHIFT)
+#       define XM9_PUPMODE           (1 << 0)
+#       define XM9_ODD_PIXEL         (1 << 1)
+#       define XM9_8_BITPLANES       (1 << 2)
+#       define XM9_SLOW_DCB          (1 << 3)
+#       define XM9_VIDEO_RGBMAP_MASK (3 << 4)
+#       define XM9_EXPRESS_VIDEO     (1 << 6)
+#       define XM9_VIDEO_OPTION      (1 << 7)
+#   define XM9_CRS_REVISION          (1 << DCB_CRS_SHIFT)
+#   define XM9_CRS_FIFO_AVAIL        (2 << DCB_CRS_SHIFT)
+#       define XM9_FIFO_0_AVAIL      0
+#       define XM9_FIFO_1_AVAIL      1
+#       define XM9_FIFO_2_AVAIL      3
+#       define XM9_FIFO_3_AVAIL      2
+#       define XM9_FIFO_FULL         XM9_FIFO_0_AVAIL
+#       define XM9_FIFO_EMPTY        XM9_FIFO_3_AVAIL
+#   define XM9_CRS_CURS_CMAP_MSB     (3 << DCB_CRS_SHIFT)
+#   define XM9_CRS_PUP_CMAP_MSB      (4 << DCB_CRS_SHIFT)
+#   define XM9_CRS_MODE_REG_DATA     (5 << DCB_CRS_SHIFT)
+#   define XM9_CRS_MODE_REG_INDEX    (7 << DCB_CRS_SHIFT)
+
+
+#define DCB_CYCLES(setup,hold,width)                \
+                  ((hold << DCB_CSHOLD_SHIFT)  |    \
+		   (setup << DCB_CSSETUP_SHIFT)|    \
+		   (width << DCB_CSWIDTH_SHIFT))
+
+#define W_DCB_XMAP9_PROTOCOL       DCB_CYCLES (2, 1, 0)
+#define WSLOW_DCB_XMAP9_PROTOCOL   DCB_CYCLES (5, 5, 0)
+#define WAYSLOW_DCB_XMAP9_PROTOCOL DCB_CYCLES (12, 12, 0)
+#define R_DCB_XMAP9_PROTOCOL       DCB_CYCLES (2, 1, 3)
+
+static __inline__ void
+xmap9FIFOWait (struct newport_regs *rex)
+{
+        rex->set.dcbmode = DCB_XMAP0 | XM9_CRS_FIFO_AVAIL |
+		DCB_DATAWIDTH_1 | R_DCB_XMAP9_PROTOCOL;
+        newport_bfwait (rex);
+	
+        while ((rex->set.dcbdata0.bybytes.b3 & 3) != XM9_FIFO_EMPTY)
+		;
+}
+
+static __inline__ void
+xmap9SetModeReg (struct newport_regs *rex, unsigned int modereg, unsigned int data24, int cfreq)
+{
+        if (cfreq > 119)
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+                        DCB_DATAWIDTH_4 | W_DCB_XMAP9_PROTOCOL;
+        else if (cfreq > 59)
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+		    DCB_DATAWIDTH_4 | WSLOW_DCB_XMAP9_PROTOCOL;    
+        else
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+                        DCB_DATAWIDTH_4 | WAYSLOW_DCB_XMAP9_PROTOCOL; 
+        rex->set.dcbdata0.byword = ((modereg) << 24) | (data24 & 0xffffff);
+}
+
+#define BT445_PROTOCOL		DCB_CYCLES(1,1,3)
+
+#define BT445_CSR_ADDR_REG	(0 << DCB_CRS_SHIFT)
+#define BT445_CSR_REVISION	(2 << DCB_CRS_SHIFT)
+
+#define BT445_REVISION_REG	0x01
+
+#endif /* !(_SGI_NEWPORT_H) */
+
diff --git a/include/video/permedia2.h b/include/video/permedia2.h
new file mode 100644
index 000000000000..b95d36289336
--- /dev/null
+++ b/include/video/permedia2.h
@@ -0,0 +1,233 @@
+/*
+ * Permedia2 framebuffer driver definitions.
+ * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * --------------------------------------------------------------------------
+ * $Id: pm2fb.h,v 1.26 2000/09/19 00:11:53 illo Exp $
+ * --------------------------------------------------------------------------
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef PM2FB_H
+#define PM2FB_H
+
+#define PM2_REFERENCE_CLOCK	14318			/* in KHz */
+#define PM2_MAX_PIXCLOCK	230000			/* in KHz */
+#define PM2_REGS_SIZE		0x10000
+
+#define PM2TAG(r) (u32 )(((r)-0x8000)>>3)
+
+/*****************************************************************************
+ * Permedia2 registers used in the framebuffer
+ *****************************************************************************/
+ 
+#define PM2R_RESET_STATUS				0x0000
+#define PM2R_IN_FIFO_SPACE				0x0018
+#define PM2R_OUT_FIFO_WORDS				0x0020
+#define PM2R_APERTURE_ONE				0x0050
+#define PM2R_APERTURE_TWO				0x0058
+#define PM2R_FIFO_DISCON				0x0068
+#define PM2R_CHIP_CONFIG				0x0070
+
+#define PM2R_REBOOT					0x1000
+#define PM2R_MEM_CONTROL				0x1040
+#define PM2R_BOOT_ADDRESS				0x1080
+#define PM2R_MEM_CONFIG					0x10c0
+#define PM2R_BYPASS_WRITE_MASK				0x1100
+#define PM2R_FRAMEBUFFER_WRITE_MASK			0x1140
+
+#define PM2R_OUT_FIFO					0x2000
+
+#define PM2R_SCREEN_BASE				0x3000
+#define PM2R_SCREEN_STRIDE				0x3008
+#define PM2R_H_TOTAL					0x3010
+#define PM2R_HG_END					0x3018
+#define PM2R_HB_END					0x3020
+#define PM2R_HS_START					0x3028
+#define PM2R_HS_END					0x3030
+#define PM2R_V_TOTAL					0x3038
+#define PM2R_VB_END					0x3040
+#define PM2R_VS_START					0x3048
+#define PM2R_VS_END					0x3050
+#define PM2R_VIDEO_CONTROL				0x3058
+#define PM2R_LINE_COUNT					0x3070
+#define PM2R_FIFO_CONTROL				0x3078
+
+#define PM2R_RD_PALETTE_WRITE_ADDRESS			0x4000
+#define PM2R_RD_PALETTE_DATA				0x4008
+#define PM2R_RD_PIXEL_MASK				0x4010
+#define PM2R_RD_PALETTE_READ_ADDRESS			0x4018
+#define PM2R_RD_INDEXED_DATA				0x4050
+
+#define PM2R_START_X_DOM				0x8000
+#define PM2R_D_X_DOM					0x8008
+#define PM2R_START_X_SUB				0x8010
+#define PM2R_D_X_SUB					0x8018
+#define PM2R_START_Y					0x8020
+#define PM2R_D_Y					0x8028
+#define PM2R_COUNT					0x8030
+#define PM2R_RENDER					0x8038
+#define PM2R_RASTERIZER_MODE				0x80a0
+#define PM2R_RECTANGLE_ORIGIN				0x80d0
+#define PM2R_RECTANGLE_SIZE				0x80d8
+#define PM2R_PACKED_DATA_LIMITS				0x8150
+#define PM2R_SCISSOR_MODE				0x8180
+#define PM2R_SCREEN_SIZE				0x8198
+#define PM2R_AREA_STIPPLE_MODE				0x81a0
+#define PM2R_WINDOW_ORIGIN				0x81c8
+#define PM2R_TEXTURE_ADDRESS_MODE			0x8380
+#define PM2R_TEXTURE_MAP_FORMAT				0x8588
+#define PM2R_TEXTURE_DATA_FORMAT			0x8590
+#define PM2R_TEXTURE_READ_MODE				0x8670
+#define PM2R_TEXEL_LUT_MODE				0x8678
+#define PM2R_TEXTURE_COLOR_MODE				0x8680
+#define PM2R_FOG_MODE					0x8690
+#define PM2R_COLOR_DDA_MODE				0x87e0
+#define PM2R_ALPHA_BLEND_MODE				0x8810
+#define PM2R_DITHER_MODE				0x8818
+#define PM2R_FB_SOFT_WRITE_MASK				0x8820
+#define PM2R_LOGICAL_OP_MODE				0x8828
+#define PM2R_LB_READ_MODE				0x8880
+#define PM2R_LB_READ_FORMAT				0x8888
+#define PM2R_LB_SOURCE_OFFSET				0x8890
+#define PM2R_LB_WINDOW_BASE				0x88b8
+#define PM2R_LB_WRITE_FORMAT				0x88c8
+#define PM2R_STENCIL_MODE				0x8988
+#define PM2R_DEPTH_MODE					0x89a0
+#define PM2R_FB_READ_MODE				0x8a80
+#define PM2R_FB_SOURCE_OFFSET				0x8a88
+#define PM2R_FB_PIXEL_OFFSET				0x8a90
+#define PM2R_FB_WINDOW_BASE				0x8ab0
+#define PM2R_FB_WRITE_MODE				0x8ab8
+#define PM2R_FB_HARD_WRITE_MASK				0x8ac0
+#define PM2R_FB_BLOCK_COLOR				0x8ac8
+#define PM2R_FB_READ_PIXEL				0x8ad0
+#define PM2R_FILTER_MODE				0x8c00
+#define PM2R_SYNC					0x8c40
+#define PM2R_YUV_MODE					0x8f00
+#define PM2R_STATISTICS_MODE				0x8c08
+#define PM2R_FB_SOURCE_DELTA				0x8d88
+#define PM2R_CONFIG					0x8d90
+#define PM2R_DELTA_MODE					0x9300
+
+/* Permedia2v */
+#define PM2VR_RD_INDEX_LOW				0x4020
+#define PM2VR_RD_INDEX_HIGH				0x4028
+#define PM2VR_RD_INDEXED_DATA				0x4030
+
+/* Permedia2 RAMDAC indexed registers */
+#define PM2I_RD_CURSOR_CONTROL				0x06
+#define PM2I_RD_COLOR_MODE				0x18
+#define PM2I_RD_MODE_CONTROL				0x19
+#define PM2I_RD_MISC_CONTROL				0x1e
+#define PM2I_RD_PIXEL_CLOCK_A1				0x20
+#define PM2I_RD_PIXEL_CLOCK_A2				0x21
+#define PM2I_RD_PIXEL_CLOCK_A3				0x22
+#define PM2I_RD_PIXEL_CLOCK_STATUS			0x29
+#define PM2I_RD_MEMORY_CLOCK_1				0x30
+#define PM2I_RD_MEMORY_CLOCK_2				0x31
+#define PM2I_RD_MEMORY_CLOCK_3				0x32
+#define PM2I_RD_MEMORY_CLOCK_STATUS			0x33
+#define PM2I_RD_COLOR_KEY_CONTROL			0x40
+#define PM2I_RD_OVERLAY_KEY				0x41
+#define PM2I_RD_RED_KEY					0x42
+#define PM2I_RD_GREEN_KEY				0x43
+#define PM2I_RD_BLUE_KEY				0x44
+
+/* Permedia2v extensions */
+#define PM2VI_RD_MISC_CONTROL				0x000
+#define PM2VI_RD_SYNC_CONTROL				0x001
+#define PM2VI_RD_DAC_CONTROL				0x002
+#define PM2VI_RD_PIXEL_SIZE				0x003
+#define PM2VI_RD_COLOR_FORMAT				0x004
+#define PM2VI_RD_CURSOR_MODE				0x005
+#define PM2VI_RD_CURSOR_X_LOW				0x007
+#define PM2VI_RD_CURSOR_X_HIGH				0x008
+#define PM2VI_RD_CURSOR_Y_LOW				0x009
+#define PM2VI_RD_CURSOR_Y_HIGH				0x00A
+#define PM2VI_RD_CURSOR_X_HOT				0x00B
+#define PM2VI_RD_CURSOR_Y_HOT				0x00C
+#define PM2VI_RD_CLK0_PRESCALE				0x201
+#define PM2VI_RD_CLK0_FEEDBACK				0x202
+#define PM2VI_RD_CLK0_POSTSCALE				0x203
+#define PM2VI_RD_CLK1_PRESCALE				0x204
+#define PM2VI_RD_CLK1_FEEDBACK				0x205
+#define PM2VI_RD_CLK1_POSTSCALE				0x206
+#define PM2VI_RD_CURSOR_PALETTE				0x303
+#define PM2VI_RD_CURSOR_PATTERN				0x400
+
+/* Fields and flags */
+#define PM2F_RENDER_AREASTIPPLE				(1L<<0)
+#define PM2F_RENDER_FASTFILL				(1L<<3)
+#define PM2F_RENDER_PRIMITIVE_MASK			(3L<<6)
+#define PM2F_RENDER_LINE				0
+#define PM2F_RENDER_TRAPEZOID				(1L<<6)
+#define PM2F_RENDER_POINT				(2L<<6)
+#define PM2F_RENDER_RECTANGLE				(3L<<6)
+#define PM2F_SYNCHRONIZATION				(1L<<10)
+#define PM2F_PLL_LOCKED					0x10
+#define PM2F_BEING_RESET				(1L<<31)
+#define PM2F_DATATYPE_COLOR				0x8000
+#define PM2F_VGA_ENABLE					0x02
+#define PM2F_VGA_FIXED					0x04
+#define PM2F_FB_WRITE_ENABLE				0x01
+#define PM2F_FB_READ_SOURCE_ENABLE			0x0200
+#define PM2F_RD_PALETTE_WIDTH_8				0x02
+#define PM2F_PART_PROD_MASK				0x01ff
+#define PM2F_SCREEN_SCISSOR_ENABLE			0x02
+#define PM2F_DATA_64_ENABLE				0x00010000
+#define PM2F_BLANK_LOW					0x02
+#define PM2F_HSYNC_MASK					0x18
+#define PM2F_VSYNC_MASK					0x60
+#define PM2F_HSYNC_ACT_HIGH				0x08
+#define PM2F_HSYNC_FORCED_LOW				0x10
+#define PM2F_HSYNC_ACT_LOW				0x18
+#define PM2F_VSYNC_ACT_HIGH				0x20
+#define PM2F_VSYNC_FORCED_LOW				0x40
+#define PM2F_VSYNC_ACT_LOW				0x60
+#define PM2F_LINE_DOUBLE				0x04
+#define PM2F_VIDEO_ENABLE				0x01
+#define PM2F_RD_PIXELFORMAT_SVGA			0x01
+#define PM2F_RD_PIXELFORMAT_RGB232OFFSET		0x02
+#define PM2F_RD_PIXELFORMAT_RGBA2321			0x03
+#define PM2F_RD_PIXELFORMAT_RGBA5551			0x04
+#define PM2F_RD_PIXELFORMAT_RGBA4444			0x05
+#define PM2F_RD_PIXELFORMAT_RGB565			0x06
+#define PM2F_RD_PIXELFORMAT_RGBA8888			0x08
+#define PM2F_RD_PIXELFORMAT_RGB888			0x09
+#define PM2F_RD_GUI_ACTIVE				0x10
+#define PM2F_RD_COLOR_MODE_RGB				0x20
+#define PM2F_DELTA_ORDER_RGB				(1L<<18)
+#define PM2F_RD_TRUECOLOR				0x80
+#define PM2F_NO_ALPHA_BUFFER				0x10
+#define PM2F_TEXTEL_SIZE_16				0x00080000
+#define PM2F_TEXTEL_SIZE_32				0x00100000
+#define PM2F_TEXTEL_SIZE_4				0x00180000
+#define PM2F_TEXTEL_SIZE_24				0x00200000
+#define PM2F_INCREASE_X					(1L<<21)
+#define PM2F_INCREASE_Y					(1L<<22)
+#define PM2F_CONFIG_FB_WRITE_ENABLE			(1L<<3)
+#define PM2F_CONFIG_FB_PACKED_DATA			(1L<<2)
+#define PM2F_CONFIG_FB_READ_DEST_ENABLE			(1L<<1)
+#define PM2F_CONFIG_FB_READ_SOURCE_ENABLE		(1L<<0)
+#define PM2F_COLOR_KEY_TEST_OFF				(1L<<4)
+#define PM2F_MEM_CONFIG_RAM_MASK			(3L<<29)
+#define PM2F_MEM_BANKS_1				0L
+#define PM2F_MEM_BANKS_2				(1L<<29)
+#define PM2F_MEM_BANKS_3				(2L<<29)
+#define PM2F_MEM_BANKS_4				(3L<<29)
+#define PM2F_APERTURE_STANDARD				0
+#define PM2F_APERTURE_BYTESWAP				1
+#define PM2F_APERTURE_HALFWORDSWAP			2
+
+typedef enum {
+	PM2_TYPE_PERMEDIA2,
+	PM2_TYPE_PERMEDIA2V
+} pm2type_t;
+
+#endif /* PM2FB_H */
+
+/*****************************************************************************
+ * That's all folks!
+ *****************************************************************************/
diff --git a/include/video/pm3fb.h b/include/video/pm3fb.h
new file mode 100644
index 000000000000..8d3cef5d87a2
--- /dev/null
+++ b/include/video/pm3fb.h
@@ -0,0 +1,1241 @@
+/*
+ *  linux/drivers/video/pm3fb.h -- 3DLabs Permedia3 frame buffer device
+ *  
+ *  Copyright (C) 2001 Romain Dolbeau <dolbeau@irisa.fr>
+ *  Copyright (C) 2001 Sven Luther, <luther@dpt-info.u-strasbg.fr>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ *
+ *  $Header: /cvsroot/linux/drivers/video/pm3fb.h,v 1.1 2002/02/25 19:11:06 marcelo Exp $
+ *
+ */
+
+#ifndef PM3FB_H
+#define PM3FB_H
+
+/**********************************************
+*  GLINT Permedia3 Control Status registers   *
+***********************************************/
+/* Control Status Registers */
+#define PM3ResetStatus						0x0000
+#define PM3IntEnable						0x0008
+#define PM3IntFlags						0x0010
+#define PM3InFIFOSpace						0x0018
+#define PM3OutFIFOWords						0x0020
+#define PM3DMAAddress						0x0028
+#define PM3DMACount						0x0030
+#define PM3ErrorFlags						0x0038
+#define PM3VClkCtl						0x0040
+#define PM3TestRegister						0x0048
+#define PM3Aperture0						0x0050
+#define PM3Aperture1						0x0058
+#define PM3DMAControl						0x0060
+#define PM3FIFODis						0x0068
+#define PM3ChipConfig						0x0070
+#define PM3AGPControl						0x0078
+
+#define PM3GPOutDMAAddress					0x0080
+#define PM3PCIFeedbackCount					0x0088
+#define PM3PCIAbortStatus					0x0090
+#define PM3PCIAbortAddress					0x0098
+
+#define PM3PCIPLLStatus						0x00f0
+
+#define PM3HostTextureAddress					0x0100
+#define PM3TextureDownloadControl				0x0108
+#define PM3TextureOperation					0x0110
+#define PM3LogicalTexturePage					0x0118
+#define PM3TexDMAAddress					0x0120
+#define PM3TexFIFOSpace						0x0128
+
+/**********************************************
+*  GLINT Permedia3 Region 0 Bypass Controls   *
+***********************************************/
+#define PM3ByAperture1Mode					0x0300
+	#define PM3ByApertureMode_BYTESWAP_ABCD			(0<<0)
+	#define PM3ByApertureMode_BYTESWAP_BADC			(1<<0)
+	#define PM3ByApertureMode_BYTESWAP_CDAB			(2<<0)
+	#define PM3ByApertureMode_BYTESWAP_DCBA			(3<<0)
+	#define PM3ByApertureMode_PATCH_DISABLE			(0<<2)
+	#define PM3ByApertureMode_PATCH_ENABLE			(1<<2)
+	#define PM3ByApertureMode_FORMAT_RAW			(0<<3)
+	#define PM3ByApertureMode_FORMAT_YUYV			(1<<3)
+	#define PM3ByApertureMode_FORMAT_UYVY			(2<<3)
+	#define PM3ByApertureMode_PIXELSIZE_8BIT		(0<<5)
+	#define PM3ByApertureMode_PIXELSIZE_16BIT		(1<<5)
+	#define PM3ByApertureMode_PIXELSIZE_32BIT		(2<<5)
+                #define PM3ByApertureMode_PIXELSIZE_MASK        (3<<5)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_1024		(0<<7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_2048		(1<<7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_4096		(2<<7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_8192		(3<<7)
+	#define PM3ByApertureMode_PATCH_OFFSET_X(off)	(((off)&7f)<<9)
+	#define PM3ByApertureMode_PATCH_OFFSET_Y(off)	(((off)&7f)<<16)
+	#define PM3ByApertureMode_FRAMEBUFFER			(0<<21)
+	#define PM3ByApertureMode_LOCALBUFFER			(1<<21)
+	#define PM3ByApertureMode_DOUBLE_WRITE_OFF		(0<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_1MB		(1<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_2MB		(2<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_4MB		(3<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_8MB		(4<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_16MB		(5<<22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_32MB		(6<<22)
+
+#define PM3ByAperture2Mode					0x0328
+	
+/**********************************************
+*  GLINT Permedia3 Memory Control (0x1000)    *
+***********************************************/
+#define PM3MemCounter						0x1000
+#define PM3MemBypassWriteMask					0x1008
+#define PM3MemScratch						0x1010
+#define PM3LocalMemCaps						0x1018
+        #define PM3LocalMemCaps_NoWriteMask                     (1 << 28)
+#define PM3LocalMemTimings					0x1020
+#define PM3LocalMemControl					0x1028
+#define PM3LocalMemRefresh					0x1030
+#define PM3LocalMemPowerDown					0x1038
+#define PM3RemoteMemControl					0x1100
+
+/**********************************************
+*  GLINT Permedia3 Video Control (0x3000)     *
+***********************************************/
+
+#define PM3ScreenBase						0x3000
+#define PM3ScreenStride						0x3008
+#define PM3HTotal						0x3010
+#define PM3HgEnd						0x3018
+#define PM3HbEnd						0x3020
+#define PM3HsStart						0x3028
+#define PM3HsEnd						0x3030
+#define PM3VTotal						0x3038
+#define PM3VbEnd						0x3040
+#define PM3VsStart						0x3048
+#define PM3VsEnd						0x3050
+#define PM3VideoControl						0x3058
+	#define PM3VideoControl_DISABLE				(0<<0)
+	#define PM3VideoControl_ENABLE				(1<<0)
+	#define PM3VideoControl_BLANK_ACTIVE_HIGH		(0<<1)
+	#define PM3VideoControl_BLANK_ACTIVE_LOW		(1<<1)
+	#define PM3VideoControl_LINE_DOUBLE_OFF			(0<<2)
+	#define PM3VideoControl_LINE_DOUBLE_ON			(1<<2)
+	#define PM3VideoControl_HSYNC_FORCE_HIGH		(0<<3)
+	#define PM3VideoControl_HSYNC_ACTIVE_HIGH		(1<<3)
+	#define PM3VideoControl_HSYNC_FORCE_LOW			(2<<3)
+	#define PM3VideoControl_HSYNC_ACTIVE_LOW		(3<<3)
+        #define PM3VideoControl_HSYNC_MASK          (3<<3)
+	#define PM3VideoControl_VSYNC_FORCE_HIGH		(0<<5)
+	#define PM3VideoControl_VSYNC_ACTIVE_HIGH		(1<<5)
+	#define PM3VideoControl_VSYNC_FORCE_LOW			(2<<5)
+	#define PM3VideoControl_VSYNC_ACTIVE_LOW		(3<<5)
+        #define PM3VideoControl_VSYNC_MASK          (3<<5)
+	#define PM3VideoControl_BYTE_DOUBLE_OFF			(0<<7)
+	#define PM3VideoControl_BYTE_DOUBLE_ON			(1<<7)
+	#define PM3VideoControl_BUFFER_SWAP_SYNCON_FRAMEBLANK	(0<<9)
+	#define PM3VideoControl_BUFFER_SWAP_FREE_RUNNING	(1<<9)
+	#define PM3VideoControl_BUFFER_SWAP_LIMITETO_FRAMERATE	(2<<9)
+	#define PM3VideoControl_STEREO_DISABLE			(0<<11)
+	#define PM3VideoControl_STEREO_ENABLE			(1<<11)
+	#define PM3VideoControl_RIGHT_EYE_ACTIVE_HIGH		(0<<12)
+	#define PM3VideoControl_RIGHT_EYE_ACTIVE_LOW		(1<<12)
+	#define PM3VideoControl_VIDEO_EXT_LOW			(0<<14)
+	#define PM3VideoControl_VIDEO_EXT_HIGH			(1<<14)
+	#define PM3VideoControl_SYNC_MODE_INDEPENDENT		(0<<16)
+	#define PM3VideoControl_SYNC_MODE_SYNCTO_VSA		(1<<16)
+	#define PM3VideoControl_SYNC_MODE_SYNCTO_VSB		(2<<16)
+	#define PM3VideoControl_PATCH_DISABLE			(0<<18)
+	#define PM3VideoControl_PATCH_ENABLE			(1<<18)
+	#define PM3VideoControl_PIXELSIZE_8BIT			(0<<19)
+	#define PM3VideoControl_PIXELSIZE_16BIT			(1<<19)
+	#define PM3VideoControl_PIXELSIZE_32BIT			(2<<19)
+	#define PM3VideoControl_DISPLAY_DISABLE			(0<<21)
+	#define PM3VideoControl_DISPLAY_ENABLE			(1<<21)
+	#define PM3VideoControl_PATCH_OFFSET_X(off)	(((off)&0x3f)<<22)
+	#define PM3VideoControl_PATCH_OFFSET_Y(off)	(((off)&0x3f)<<28)
+#define PM3InterruptLine					0x3060
+#define PM3DisplayData						0x3068
+#define PM3VerticalLineCount					0x3070
+#define PM3FifoControl						0x3078
+#define PM3ScreenBaseRight					0x3080
+#define PM3MiscControl						0x3088
+
+#define PM3VideoOverlayUpdate					0x3100
+        #define PM3VideoOverlayUpdate_DISABLE                   (0<<0)
+        #define PM3VideoOverlayUpdate_ENABLE                    (1<<0)
+#define PM3VideoOverlayMode					0x3108
+	#define PM3VideoOverlayMode_DISABLE			(0<<0)
+	#define PM3VideoOverlayMode_ENABLE			(1<<0)
+        #define PM3VideoOverlayMode_BUFFERSYNC_MANUAL           (0<<1)
+        #define PM3VideoOverlayMode_BUFFERSYNC_VIDEOSTREAMA     (1<<1)
+        #define PM3VideoOverlayMode_BUFFERSYNC_VIDEOSTREAMB     (2<<1)
+        #define PM3VideoOverlayMode_FIELDPOLARITY_NORMAL        (0<<4)
+        #define PM3VideoOverlayMode_FIELDPOLARITY_INVERT        (1<<4)
+        #define PM3VideoOverlayMode_PIXELSIZE_8BIT              (0<<5)
+        #define PM3VideoOverlayMode_PIXELSIZE_16BIT             (1<<5)
+        #define PM3VideoOverlayMode_PIXELSIZE_32BIT             (2<<5)
+        #define PM3VideoOverlayMode_COLORFORMAT_RGB8888 ((0<<7)|(1<<12)|(2<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_RGB4444 ((1<<7)|(1<<12)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_RGB5551 ((2<<7)|(1<<12)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_RGB565  ((3<<7)|(1<<12)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_RGB332  ((4<<7)|(1<<12)|(0<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_BGR8888 ((0<<7)|(2<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_BGR4444 ((1<<7)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_BGR5551 ((2<<7)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_BGR565  ((3<<7)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_BGR332  ((4<<7)|(0<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_CI8     ((5<<7)|(1<<12)|(0<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_VUY444  ((2<<10)|(1<<12)|(2<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_YUV444  ((2<<10)|(2<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_VUY422  ((1<<10)|(1<<12)|(1<<5))
+        #define PM3VideoOverlayMode_COLORFORMAT_YUV422  ((1<<10)|(1<<5))
+        #define PM3VideoOverlayMode_COLORORDER_BGR              (0<<12)
+        #define PM3VideoOverlayMode_COLORORDER_RGB              (1<<12)
+        #define PM3VideoOverlayMode_LINEARCOLOREXT_OFF          (0<<13)
+        #define PM3VideoOverlayMode_LINEARCOLOREXT_ON           (1<<13)
+        #define PM3VideoOverlayMode_FILTER_MASK                 (3<<14)
+        #define PM3VideoOverlayMode_FILTER_OFF                  (0<<14)
+        #define PM3VideoOverlayMode_FILTER_FULL                 (1<<14)
+        #define PM3VideoOverlayMode_FILTER_PARTIAL              (2<<14)
+        #define PM3VideoOverlayMode_DEINTERLACE_OFF             (0<<16)
+        #define PM3VideoOverlayMode_DEINTERLACE_BOB             (1<<16)
+        #define PM3VideoOverlayMode_PATCHMODE_OFF               (0<<18)
+        #define PM3VideoOverlayMode_PATCHMODE_ON                (1<<18)
+        #define PM3VideoOverlayMode_FLIP_VIDEO                  (0<<20)
+        #define PM3VideoOverlayMode_FLIP_VIDEOSTREAMA           (1<<20)
+        #define PM3VideoOverlayMode_FLIP_VIDEOSTREAMB           (2<<20)
+        #define PM3VideoOverlayMode_MIRROR_MASK                 (3<<23)
+        #define PM3VideoOverlayMode_MIRRORX_OFF                 (0<<23)
+        #define PM3VideoOverlayMode_MIRRORX_ON                  (1<<23)
+        #define PM3VideoOverlayMode_MIRRORY_OFF                 (0<<24)
+        #define PM3VideoOverlayMode_MIRRORY_ON                  (1<<24)
+#define PM3VideoOverlayFifoControl				0x3110
+#define PM3VideoOverlayIndex					0x3118
+#define PM3VideoOverlayBase0					0x3120
+#define PM3VideoOverlayBase1					0x3128
+#define PM3VideoOverlayBase2					0x3130
+#define PM3VideoOverlayStride					0x3138
+        #define PM3VideoOverlayStride_STRIDE(s)         (((s)&0xfff)<<0)
+#define PM3VideoOverlayWidth                                    0x3140
+        #define PM3VideoOverlayWidth_WIDTH(w)           (((w)&0xfff)<<0)
+#define PM3VideoOverlayHeight                                   0x3148
+        #define PM3VideoOverlayHeight_HEIGHT(h)         (((h)&0xfff)<<0)
+#define PM3VideoOverlayOrigin                                   0x3150
+        #define PM3VideoOverlayOrigin_XORIGIN(x)        (((x)&0xfff)<<0)
+        #define PM3VideoOverlayOrigin_YORIGIN(y)        (((y)&0xfff)<<16)
+#define PM3VideoOverlayShrinkXDelta                             0x3158
+        #define PM3VideoOverlayShrinkXDelta_NONE                (1<<16)
+        #define PM3VideoOverlayShrinkXDelta_DELTA(s,d)          \
+                ((((s)<<16)/(d))&0x0ffffff0)
+#define PM3VideoOverlayZoomXDelta                               0x3160
+        #define PM3VideoOverlayZoomXDelta_NONE                  (1<<16)
+        #define PM3VideoOverlayZoomXDelta_DELTA(s,d)            \
+                ((((s)<<16)/(d))&0x0001fff0)
+#define PM3VideoOverlayYDelta                                   0x3168
+        #define PM3VideoOverlayYDelta_NONE                      (1<<16)
+        #define PM3VideoOverlayYDelta_DELTA(s,d)                        \
+                ((((s)<<16)/(d))&0x0ffffff0)
+#define PM3VideoOverlayFieldOffset				0x3170
+#define PM3VideoOverlayStatus					0x3178
+
+/**********************************************
+*  GLINT Permedia3 RAMDAC Registers (0x4000)  *
+***********************************************/
+/* Direct Registers */
+#define PM3RD_PaletteWriteAddress				0x4000
+#define PM3RD_PaletteData					0x4008
+#define PM3RD_PixelMask						0x4010
+#define PM3RD_PaletteReadAddress				0x4018
+
+#define PM3RD_IndexLow						0x4020
+#define PM3RD_IndexHigh						0x4028
+#define PM3RD_IndexedData					0x4030
+#define PM3RD_IndexControl					0x4038
+	#define PM3RD_IndexControl_AUTOINCREMENT_ENABLE		(1<<0)
+	#define PM3RD_IndexControl_AUTOINCREMENT_DISABLE	(0<<0)
+
+/* Indirect Registers */
+#define PM3RD_MiscControl					0x000
+	#define PM3RD_MiscControl_HIGHCOLOR_RES_DISABLE		(0<<0)
+	#define PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE		(1<<0)
+	#define PM3RD_MiscControl_PIXELDOUBLE_DISABLE		(0<<1)
+	#define PM3RD_MiscControl_PIXELDOUBLE_ENABLE		(1<<1)
+	#define PM3RD_MiscControl_LASTREAD_ADDR_DISABLE		(0<<2)
+	#define PM3RD_MiscControl_LASTREAD_ADDR_ENABLE		(1<<2)
+	#define PM3RD_MiscControl_DIRECTCOLOR_DISABLE		(0<<3)
+	#define PM3RD_MiscControl_DIRECTCOLOR_ENABLE		(1<<3)
+	#define PM3RD_MiscControl_OVERLAY_DISABLE		(0<<4)
+	#define PM3RD_MiscControl_OVERLAY_ENABLE		(1<<4)
+	#define PM3RD_MiscControl_PIXELDOUBLE_BUFFER_DISABLE	(0<<5)
+	#define PM3RD_MiscControl_PIXELDOUBLE_BUFFER_ENABLE	(1<<5)
+	#define PM3RD_MiscControl_VSB_OUTPUT_DISABLE		(0<<6)
+	#define PM3RD_MiscControl_VSB_OUTPUT_ENABLE		(1<<6)
+	#define PM3RD_MiscControl_STEREODOUBLE_BUFFER_DISABLE	(0<<7)
+	#define PM3RD_MiscControl_STEREODOUBLE_BUFFER_ENABLE	(1<<7)
+#define PM3RD_SyncControl					0x001
+	#define PM3RD_SyncControl_HSYNC_ACTIVE_LOW		(0<<0)
+	#define PM3RD_SyncControl_HSYNC_ACTIVE_HIGH		(1<<0)
+	#define PM3RD_SyncControl_HSYNC_FORCE_ACTIVE		(3<<0)
+	#define PM3RD_SyncControl_HSYNC_FORCE_INACTIVE		(4<<0)
+	#define PM3RD_SyncControl_HSYNC_TRI_STATE		(2<<0)
+	#define PM3RD_SyncControl_VSYNC_ACTIVE_LOW		(0<<3)
+	#define PM3RD_SyncControl_VSYNC_ACTIVE_HIGH		(1<<3)
+	#define PM3RD_SyncControl_VSYNC_TRI_STATE		(2<<3)
+	#define PM3RD_SyncControl_VSYNC_FORCE_ACTIVE		(3<<3)
+	#define PM3RD_SyncControl_VSYNC_FORCE_INACTIVE		(4<<3)
+	#define PM3RD_SyncControl_HSYNC_OVERRIDE_SETBY_HSYNC	(0<<6)
+	#define PM3RD_SyncControl_HSYNC_OVERRIDE_FORCE_HIGH	(1<<6)
+	#define PM3RD_SyncControl_VSYNC_OVERRIDE_SETBY_VSYNC	(0<<7)
+	#define PM3RD_SyncControl_VSYNC_OVERRIDE_FORCE_HIGH	(1<<7)
+#define PM3RD_DACControl					0x002
+	#define PM3RD_DACControl_DAC_POWER_ON			(0<<0)
+	#define PM3RD_DACControl_DAC_POWER_OFF			(1<<0)
+	#define PM3RD_DACControl_SYNC_ON_GREEN_DISABLE		(0<<3)
+	#define PM3RD_DACControl_SYNC_ON_GREEN_ENABLE		(1<<3)
+	#define PM3RD_DACControl_BLANK_RED_DAC_DISABLE		(0<<4)
+	#define PM3RD_DACControl_BLANK_RED_DAC_ENABLE		(1<<4)
+	#define PM3RD_DACControl_BLANK_GREEN_DAC_DISABLE	(0<<5)
+	#define PM3RD_DACControl_BLANK_GREEN_DAC_ENABLE		(1<<5)
+	#define PM3RD_DACControl_BLANK_BLUE_DAC_DISABLE		(0<<6)
+	#define PM3RD_DACControl_BLANK_BLUE_DAC_ENABLE		(1<<6)
+	#define PM3RD_DACControl_BLANK_PEDESTAL_DISABLE		(0<<7)
+	#define PM3RD_DACControl_BLANK_PEDESTAL_ENABLE		(1<<7)
+#define PM3RD_PixelSize						0x003
+	#define PM3RD_PixelSize_24_BIT_PIXELS			(4<<0)
+	#define PM3RD_PixelSize_32_BIT_PIXELS			(2<<0)
+	#define PM3RD_PixelSize_16_BIT_PIXELS			(1<<0)
+	#define PM3RD_PixelSize_8_BIT_PIXELS			(0<<0)
+#define PM3RD_ColorFormat					0x004
+	#define PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE	(1<<6)
+	#define PM3RD_ColorFormat_LINEAR_COLOR_EXT_DISABLE	(0<<6)
+	#define PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW		(1<<5)
+	#define PM3RD_ColorFormat_COLOR_ORDER_RED_LOW		(0<<5)
+	#define PM3RD_ColorFormat_COLOR_FORMAT_MASK		(0x1f<<0)
+	#define PM3RD_ColorFormat_8888_COLOR			(0<<0)
+	#define PM3RD_ColorFormat_5551_FRONT_COLOR		(1<<0)
+	#define PM3RD_ColorFormat_4444_COLOR			(2<<0)
+	#define PM3RD_ColorFormat_332_FRONT_COLOR		(5<<0)
+	#define PM3RD_ColorFormat_332_BACK_COLOR		(6<<0)
+	#define PM3RD_ColorFormat_2321_FRONT_COLOR		(9<<0)
+	#define PM3RD_ColorFormat_2321_BACK_COLOR		(10<<0)
+	#define PM3RD_ColorFormat_232_FRONTOFF_COLOR		(11<<0)
+	#define PM3RD_ColorFormat_232_BACKOFF_COLOR		(12<<0)
+	#define PM3RD_ColorFormat_5551_BACK_COLOR		(13<<0)
+	#define PM3RD_ColorFormat_CI8_COLOR			(14<<0)
+	#define PM3RD_ColorFormat_565_FRONT_COLOR		(16<<0)
+	#define PM3RD_ColorFormat_565_BACK_COLOR		(17<<0)
+#define PM3RD_CursorMode					0x005
+	#define PM3RD_CursorMode_CURSOR_DISABLE			(0<<0)
+	#define PM3RD_CursorMode_CURSOR_ENABLE			(1<<0)
+	#define PM3RD_CursorMode_FORMAT_64x64_2BPE_P0123	(0<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P0		(1<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P1		(2<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P2		(3<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P3		(4<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_4BPE_P01		(5<<2)
+	#define PM3RD_CursorMode_FORMAT_32x32_4BPE_P23		(6<<2)
+	#define PM3RD_CursorMode_TYPE_MS			(0<<4)
+	#define PM3RD_CursorMode_TYPE_X				(1<<4)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_DISABLE	(0<<6)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_ENABLE	(1<<6)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_3_COLOR	(2<<6)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_15_COLOR	(3<<6)
+#define PM3RD_CursorControl					0x006
+	#define PM3RD_CursorControl_DOUBLE_X_DISABLED		(0<<0)
+	#define PM3RD_CursorControl_DOUBLE_X_ENABLED		(1<<0)
+	#define PM3RD_CursorControl_DOUBLE_Y_DISABLED		(0<<1)
+	#define PM3RD_CursorControl_DOUBLE_Y_ENABLED		(1<<1)
+	#define PM3RD_CursorControl_READBACK_POS_DISABLED	(0<<2)
+	#define PM3RD_CursorControl_READBACK_POS_ENABLED	(1<<2)
+
+#define PM3RD_CursorXLow					0x007
+#define PM3RD_CursorXHigh					0x008
+#define PM3RD_CursorYLow					0x009
+#define PM3RD_CursorYHigh					0x00a
+#define PM3RD_CursorHotSpotX					0x00b
+#define PM3RD_CursorHotSpotY					0x00c
+#define PM3RD_OverlayKey					0x00d
+#define PM3RD_Pan						0x00e
+	#define PM3RD_Pan_DISABLE				(0<<0)
+	#define PM3RD_Pan_ENABLE				(1<<0)
+	#define PM3RD_Pan_GATE_DISABLE				(0<<1)
+	#define PM3RD_Pan_GATE_ENABLE				(1<<1)
+#define PM3RD_Sense						0x00f
+
+#define PM3RD_CheckControl					0x018
+	#define PM3RD_CheckControl_PIXEL_DISABLED		(0<<0)
+	#define PM3RD_CheckControl_PIXEL_ENABLED		(1<<0)
+	#define PM3RD_CheckControl_LUT_DISABLED			(0<<1)
+	#define PM3RD_CheckControl_LUT_ENABLED			(1<<1)
+#define PM3RD_CheckPixelRed					0x019
+#define PM3RD_CheckPixelGreen					0x01a
+#define PM3RD_CheckPixelBlue					0x01b
+#define PM3RD_CheckLUTRed					0x01c
+#define PM3RD_CheckLUTGreen					0x01d
+#define PM3RD_CheckLUTBlue					0x01e
+#define PM3RD_Scratch						0x01f
+
+#define PM3RD_VideoOverlayControl				0x020
+        #define PM3RD_VideoOverlayControl_DISABLE               (0<<0)
+        #define PM3RD_VideoOverlayControl_ENABLE                (1<<0)
+        #define PM3RD_VideoOverlayControl_MODE_MASK             (3<<1)
+        #define PM3RD_VideoOverlayControl_MODE_MAINKEY          (0<<1)
+        #define PM3RD_VideoOverlayControl_MODE_OVERLAYKEY       (1<<1)
+        #define PM3RD_VideoOverlayControl_MODE_ALWAYS           (2<<1)
+        #define PM3RD_VideoOverlayControl_MODE_BLEND            (3<<1)
+        #define PM3RD_VideoOverlayControl_DIRECTCOLOR_DISABLED  (0<<3)
+        #define PM3RD_VideoOverlayControl_DIRECTCOLOR_ENABLED   (1<<3)
+        #define PM3RD_VideoOverlayControl_BLENDSRC_MAIN         (0<<4)
+        #define PM3RD_VideoOverlayControl_BLENDSRC_REGISTER     (1<<4)
+        #define PM3RD_VideoOverlayControl_KEY_COLOR             (0<<5)
+        #define PM3RD_VideoOverlayControl_KEY_ALPHA             (1<<5)
+#define PM3RD_VideoOverlayXStartLow				0x021
+#define PM3RD_VideoOverlayXStartHigh				0x022
+#define PM3RD_VideoOverlayYStartLow				0x023
+#define PM3RD_VideoOverlayYStartHigh				0x024
+#define PM3RD_VideoOverlayXEndLow				0x025
+#define PM3RD_VideoOverlayXEndHigh				0x026
+#define PM3RD_VideoOverlayYEndLow				0x027
+#define PM3RD_VideoOverlayYEndHigh				0x028
+#define PM3RD_VideoOverlayKeyR					0x029
+#define PM3RD_VideoOverlayKeyG					0x02a
+#define PM3RD_VideoOverlayKeyB					0x02b
+#define PM3RD_VideoOverlayBlend					0x02c
+        #define PM3RD_VideoOverlayBlend_FACTOR_0_PERCENT        (0<<6)
+        #define PM3RD_VideoOverlayBlend_FACTOR_25_PERCENT       (1<<6)
+        #define PM3RD_VideoOverlayBlend_FACTOR_75_PERCENT       (2<<6)
+        #define PM3RD_VideoOverlayBlend_FACTOR_100_PERCENT      (3<<6)
+
+#define PM3RD_DClkSetup1					0x1f0
+#define PM3RD_DClkSetup2					0x1f1
+#define PM3RD_KClkSetup1					0x1f2
+#define PM3RD_KClkSetup2					0x1f3
+
+#define PM3RD_DClkControl					0x200
+	#define PM3RD_DClkControl_SOURCE_PLL			(0<<4)
+	#define PM3RD_DClkControl_SOURCE_VSA			(1<<4)
+	#define PM3RD_DClkControl_SOURCE_VSB			(2<<4)
+	#define PM3RD_DClkControl_SOURCE_EXT			(3<<4)
+	#define PM3RD_DClkControl_STATE_RUN			(2<<2)
+	#define PM3RD_DClkControl_STATE_HIGH			(1<<2)
+	#define PM3RD_DClkControl_STATE_LOW			(0<<2)
+	#define PM3RD_DClkControl_LOCKED			(1<<1)
+	#define PM3RD_DClkControl_NOT_LOCKED			(0<<1)
+	#define PM3RD_DClkControl_ENABLE			(1<<0)
+	#define PM3RD_DClkControl_DISABLE			(0<<0)
+#define PM3RD_DClk0PreScale					0x201
+#define PM3RD_DClk0FeedbackScale				0x202
+#define PM3RD_DClk0PostScale					0x203
+        #define PM3_REF_CLOCK                                   14318
+#define PM3RD_DClk1PreScale					0x204
+#define PM3RD_DClk1FeedbackScale				0x205
+#define PM3RD_DClk1PostScale					0x206
+#define PM3RD_DClk2PreScale					0x207
+#define PM3RD_DClk2FeedbackScale				0x208
+#define PM3RD_DClk2PostScale					0x209
+#define PM3RD_DClk3PreScale					0x20a
+#define PM3RD_DClk3FeedbackScale				0x20b
+#define PM3RD_DClk3PostScale					0x20c
+#define PM3RD_KClkControl					0x20d
+	#define PM3RD_KClkControl_DISABLE			(0<<0)
+	#define PM3RD_KClkControl_ENABLE			(1<<0)
+	#define PM3RD_KClkControl_NOT_LOCKED			(0<<1)
+	#define PM3RD_KClkControl_LOCKED			(1<<1)
+	#define PM3RD_KClkControl_STATE_LOW			(0<<2)
+	#define PM3RD_KClkControl_STATE_HIGH			(1<<2)
+	#define PM3RD_KClkControl_STATE_RUN			(2<<2)
+	#define PM3RD_KClkControl_STATE_LOW_POWER		(3<<2)
+	#define PM3RD_KClkControl_SOURCE_PCLK			(0<<4)
+	#define PM3RD_KClkControl_SOURCE_HALF_PCLK		(1<<4)
+	#define PM3RD_KClkControl_SOURCE_PLL			(2<<4)
+#define PM3RD_KClkPreScale					0x20e
+#define PM3RD_KClkFeedbackScale					0x20f
+#define PM3RD_KClkPostScale					0x210
+#define PM3RD_MClkControl					0x211
+	#define PM3RD_MClkControl_DISABLE			(0<<0)
+	#define PM3RD_MClkControl_ENABLE			(1<<0)
+	#define PM3RD_MClkControl_NOT_LOCKED			(0<<1)
+	#define PM3RD_MClkControl_LOCKED			(1<<1)
+	#define PM3RD_MClkControl_STATE_LOW			(0<<2)
+	#define PM3RD_MClkControl_STATE_HIGH			(1<<2)
+	#define PM3RD_MClkControl_STATE_RUN			(2<<2)
+	#define PM3RD_MClkControl_STATE_LOW_POWER		(3<<2)
+	#define PM3RD_MClkControl_SOURCE_PCLK			(0<<4)
+	#define PM3RD_MClkControl_SOURCE_HALF_PCLK		(1<<4)
+	#define PM3RD_MClkControl_SOURCE_HALF_EXT		(3<<4)
+	#define PM3RD_MClkControl_SOURCE_EXT			(4<<4)
+	#define PM3RD_MClkControl_SOURCE_HALF_KCLK		(5<<4)
+	#define PM3RD_MClkControl_SOURCE_KCLK			(6<<4)
+#define PM3RD_MClkPreScale					0x212
+#define PM3RD_MClkFeedbackScale					0x213
+#define PM3RD_MClkPostScale					0x214
+#define PM3RD_SClkControl					0x215
+	#define PM3RD_SClkControl_DISABLE			(0<<0)
+	#define PM3RD_SClkControl_ENABLE			(1<<0)
+	#define PM3RD_SClkControl_NOT_LOCKED			(0<<1)
+	#define PM3RD_SClkControl_LOCKED			(1<<1)
+	#define PM3RD_SClkControl_STATE_LOW			(0<<2)
+	#define PM3RD_SClkControl_STATE_HIGH			(1<<2)
+	#define PM3RD_SClkControl_STATE_RUN			(2<<2)
+	#define PM3RD_SClkControl_STATE_LOW_POWER		(3<<2)
+	#define PM3RD_SClkControl_SOURCE_PCLK			(0<<4)
+	#define PM3RD_SClkControl_SOURCE_HALF_PCLK		(1<<4)
+	#define PM3RD_SClkControl_SOURCE_HALF_EXT		(3<<4)
+	#define PM3RD_SClkControl_SOURCE_EXT			(4<<4)
+	#define PM3RD_SClkControl_SOURCE_HALF_KCLK		(5<<4)
+	#define PM3RD_SClkControl_SOURCE_KCLK			(6<<4)
+#define PM3RD_SClkPreScale					0x216
+#define PM3RD_SClkFeedbackScale					0x217
+#define PM3RD_SClkPostScale					0x218
+
+#define PM3RD_CursorPalette(p)					(0x303+(p))
+#define PM3RD_CursorPattern(p)					(0x400+(p))
+/******************************************************
+*  GLINT Permedia3 Video Streaming Registers (0x5000) *
+*******************************************************/
+
+#define PM3VSConfiguration					0x5800
+
+/**********************************************
+*  GLINT Permedia3 Core Registers (0x8000+)   *
+***********************************************/
+#define PM3AALineWidth						0x94c0
+#define PM3AAPointsize						0x94a0
+#define PM3AlphaBlendAlphaMode					0xafa8
+#define PM3AlphaBlendAlphaModeAnd				0xad30
+#define PM3AlphaBlendAlphaModeOr				0xad38
+#define PM3AlphaBlendColorMode					0xafa0
+#define PM3AlphaBlendColorModeAnd				0xacb0
+#define PM3AlphaBlendColorModeOr				0xacb8
+#define PM3AlphaDestColor					0xaf88
+#define PM3AlphaSourceColor					0xaf80
+#define PM3AlphaTestMode					0x8800
+#define PM3AlphaTestModeAnd					0xabf0
+#define PM3AlphaTestModeOr					0xabf8
+#define PM3AntialiasMode					0x8808
+#define PM3AntialiasModeAnd					0xac00
+#define PM3AntialiasModeOr					0xac08
+/* ... */
+#define PM3BackgroundColor					0xb0c8
+/* ... */
+#define PM3ColorDDAMode						0x87e0
+#define PM3ColorDDAModeAnd					0xabe0
+#define PM3ColorDDAModeOr					0xabe8
+#define PM3CommandInterrupt					0xa990
+#define PM3ConstantColorDDA					0xafb0
+	#define PM3ConstantColorDDA_R(r)		((r)&0xff)
+	#define PM3ConstantColorDDA_G(g)		(((g)&0xff)<<8)
+	#define PM3ConstantColorDDA_B(b)		(((b)&0xff)<<16)
+	#define PM3ConstantColorDDA_A(a)		(((a)&0xff)<<24)
+#define PM3ContextData						0x8dd0
+#define PM3ContextDump						0x8dc0
+#define PM3ContextRestore					0x8dc8
+#define PM3Continue						0x8058
+#define PM3ContinueNewDom					0x8048
+#define PM3ContinueNewLine					0x8040
+#define PM3ContinueNewSub					0x8050
+#define PM3Count						0x8030
+/* ... */
+#define PM3DeltaControl						0x9350
+#define PM3DeltaControlAnd					0xab20
+#define PM3DeltaControlOr					0xab28
+#define PM3DeltaMode						0x9300
+#define PM3DeltaModeAnd						0xaad0
+#define PM3DeltaModeOr						0xaad8
+/* ... */
+#define PM3DitherMode						0x8818
+#define PM3DitherModeAnd					0xacd0
+#define PM3DitherModeOr						0xacd8
+/* ... */
+#define PM3dXDom						0x8008
+#define PM3dXSub						0x8018
+#define PM3dY							0x8028
+/* ... */
+#define PM3FBBlockColor						0x8ac8
+#define PM3FBBlockColor0					0xb060
+#define PM3FBBlockColor1					0xb068
+#define PM3FBBlockColor2					0xb070
+#define PM3FBBlockColor3					0xb078
+#define PM3FBBlockColorBack					0xb0a0
+#define PM3FBBlockColorBack0					0xb080
+#define PM3FBBlockColorBack1					0xb088
+#define PM3FBBlockColorBack2					0xb090
+#define PM3FBBlockColorBack3					0xb098
+#define PM3FBColor						0x8a98
+#define PM3FBDestReadBufferAddr0				0xae80
+#define PM3FBDestReadBufferAddr1				0xae88
+#define PM3FBDestReadBufferAddr2				0xae90
+#define PM3FBDestReadBufferAddr3				0xae98
+#define PM3FBDestReadBufferOffset0				0xaea0
+#define PM3FBDestReadBufferOffset1				0xaea8
+#define PM3FBDestReadBufferOffset2				0xaeb0
+#define PM3FBDestReadBufferOffset3				0xaeb8
+	#define PM3FBDestReadBufferOffset_XOffset(x)	((x)&0xffff)
+	#define PM3FBDestReadBufferOffset_YOffset(y)	(((y)&0xffff)<<16)
+#define PM3FBDestReadBufferWidth0				0xaec0
+#define PM3FBDestReadBufferWidth1				0xaec8
+#define PM3FBDestReadBufferWidth2				0xaed0
+#define PM3FBDestReadBufferWidth3				0xaed8
+	#define PM3FBDestReadBufferWidth_Width(w)	((w)&0x0fff)
+
+#define PM3FBDestReadEnables					0xaee8
+#define PM3FBDestReadEnablesAnd					0xad20
+#define PM3FBDestReadEnablesOr					0xad28
+	#define PM3FBDestReadEnables_E(e)		((e)&0xff)
+	#define PM3FBDestReadEnables_E0				1<<0
+	#define PM3FBDestReadEnables_E1				1<<1
+	#define PM3FBDestReadEnables_E2				1<<2
+	#define PM3FBDestReadEnables_E3				1<<3
+	#define PM3FBDestReadEnables_E4				1<<4
+	#define PM3FBDestReadEnables_E5				1<<5
+	#define PM3FBDestReadEnables_E6				1<<6
+	#define PM3FBDestReadEnables_E7				1<<7
+	#define PM3FBDestReadEnables_R(r)		(((r)&0xff)<<8)
+	#define PM3FBDestReadEnables_R0				1<<8
+	#define PM3FBDestReadEnables_R1				1<<9
+	#define PM3FBDestReadEnables_R2				1<<10
+	#define PM3FBDestReadEnables_R3				1<<11
+	#define PM3FBDestReadEnables_R4				1<<12
+	#define PM3FBDestReadEnables_R5				1<<13
+	#define PM3FBDestReadEnables_R6				1<<14
+	#define PM3FBDestReadEnables_R7				1<<15
+	#define PM3FBDestReadEnables_ReferenceAlpha(a)	(((a)&0xff)<<24)
+
+#define PM3FBDestReadMode					0xaee0
+#define PM3FBDestReadModeAnd					0xac90
+#define PM3FBDestReadModeOr					0xac98
+	#define PM3FBDestReadMode_ReadDisable			0<<0
+	#define PM3FBDestReadMode_ReadEnable			1<<0
+	#define PM3FBDestReadMode_StripePitch(sp)	(((sp)&0x7)<<2
+	#define PM3FBDestReadMode_StripeHeight(sh)	(((sh)&0x7)<<7
+	#define PM3FBDestReadMode_Enable0			1<<8
+	#define PM3FBDestReadMode_Enable1			1<<9
+	#define PM3FBDestReadMode_Enable2			1<<10
+	#define PM3FBDestReadMode_Enable3			1<<11
+	#define PM3FBDestReadMode_Layout0(l)		(((l)&0x3)<<12
+	#define PM3FBDestReadMode_Layout1(l)		(((l)&0x3)<<14
+	#define PM3FBDestReadMode_Layout2(l)		(((l)&0x3)<<16
+	#define PM3FBDestReadMode_Layout3(l)		(((l)&0x3)<<18
+	#define PM3FBDestReadMode_Origin0			1<<20
+	#define PM3FBDestReadMode_Origin1			1<<21
+	#define PM3FBDestReadMode_Origin2			1<<22
+	#define PM3FBDestReadMode_Origin3			1<<23
+	#define PM3FBDestReadMode_Blocking			1<<24
+	#define PM3FBDestReadMode_UseReadEnabled		1<<26
+	#define PM3FBDestReadMode_AlphaFiltering		1<<27
+
+#define PM3FBHardwareWriteMask					0x8ac0
+#define PM3FBSoftwareWriteMask					0x8820
+#define PM3FBData						0x8aa0
+#define PM3FBSourceData						0x8aa8
+#define PM3FBSourceReadBufferAddr				0xaf08
+#define PM3FBSourceReadBufferOffset				0xaf10
+	#define PM3FBSourceReadBufferOffset_XOffset(x)	((x)&0xffff)
+	#define PM3FBSourceReadBufferOffset_YOffset(y)	(((y)&0xffff)<<16)
+#define PM3FBSourceReadBufferWidth				0xaf18
+	#define PM3FBSourceReadBufferWidth_Width(w)	((w)&0x0fff)
+#define PM3FBSourceReadMode					0xaf00
+#define PM3FBSourceReadModeAnd					0xaca0
+#define PM3FBSourceReadModeOr					0xaca8
+	#define PM3FBSourceReadMode_ReadDisable			(0<<0)
+	#define PM3FBSourceReadMode_ReadEnable			(1<<0)
+	#define PM3FBSourceReadMode_StripePitch(sp)	(((sp)&0x7)<<2
+	#define PM3FBSourceReadMode_StripeHeight(sh)	(((sh)&0x7)<<7
+	#define PM3FBSourceReadMode_Layout(l)		(((l)&0x3)<<8
+	#define PM3FBSourceReadMode_Origin			1<<10
+	#define PM3FBSourceReadMode_Blocking			1<<11
+	#define PM3FBSourceReadMode_UserTexelCoord		1<<13
+	#define PM3FBSourceReadMode_WrapXEnable			1<<14
+	#define PM3FBSourceReadMode_WrapYEnable			1<<15
+	#define PM3FBSourceReadMode_WrapX(w)		(((w)&0xf)<<16
+	#define PM3FBSourceReadMode_WrapY(w)		(((w)&0xf)<<20
+	#define PM3FBSourceReadMode_ExternalSourceData		1<<24
+#define PM3FBWriteBufferAddr0                                   0xb000
+#define PM3FBWriteBufferAddr1                                   0xb008
+#define PM3FBWriteBufferAddr2                                   0xb010
+#define PM3FBWriteBufferAddr3                                   0xb018
+
+#define PM3FBWriteBufferOffset0                                 0xb020
+#define PM3FBWriteBufferOffset1                                 0xb028
+#define PM3FBWriteBufferOffset2                                 0xb030
+#define PM3FBWriteBufferOffset3                                 0xb038
+	#define PM3FBWriteBufferOffset_XOffset(x)		((x)&0xffff)
+	#define PM3FBWriteBufferOffset_YOffset(y)		(((y)&0xffff)<<16)
+
+#define PM3FBWriteBufferWidth0                                  0xb040
+#define PM3FBWriteBufferWidth1                                  0xb048
+#define PM3FBWriteBufferWidth2                                  0xb050
+#define PM3FBWriteBufferWidth3                                  0xb058
+	#define PM3FBWriteBufferWidth_Width(w)			((w)&0x0fff)
+
+#define PM3FBWriteMode                                          0x8ab8
+#define PM3FBWriteModeAnd                                       0xacf0
+#define PM3FBWriteModeOr                                        0xacf8
+	#define PM3FBWriteMode_WriteDisable                     0<<0
+	#define PM3FBWriteMode_WriteEnable                      1<<0
+	#define PM3FBWriteMode_Replicate                        1<<4
+	#define PM3FBWriteMode_OpaqueSpan                       1<<5
+	#define PM3FBWriteMode_StripePitch(p)            (((p)&0x7)<<6)
+	#define PM3FBWriteMode_StripeHeight(h)           (((h)&0x7)<<9)
+	#define PM3FBWriteMode_Enable0                          1<<12
+	#define PM3FBWriteMode_Enable1                          1<<13
+	#define PM3FBWriteMode_Enable2                          1<<14
+	#define PM3FBWriteMode_Enable3                          1<<15
+	#define PM3FBWriteMode_Layout0(l)               (((l)&0x3)<<16)
+	#define PM3FBWriteMode_Layout1(l)               (((l)&0x3)<<18)
+	#define PM3FBWriteMode_Layout2(l)               (((l)&0x3)<<20)
+	#define PM3FBWriteMode_Layout3(l)               (((l)&0x3)<<22)
+	#define PM3FBWriteMode_Origin0                          1<<24
+	#define PM3FBWriteMode_Origin1                          1<<25
+	#define PM3FBWriteMode_Origin2                          1<<26
+	#define PM3FBWriteMode_Origin3                          1<<27
+#define PM3ForegroundColor					0xb0c0
+/* ... */
+#define PM3GIDMode						0xb538
+#define PM3GIDModeAnd						0xb5b0
+#define PM3GIDModeOr						0xb5b8
+/* ... */
+#define PM3LBDestReadBufferAddr					0xb510
+#define PM3LBDestReadBufferOffset				0xb518
+#define PM3LBDestReadEnables					0xb508
+#define PM3LBDestReadEnablesAnd					0xb590
+#define PM3LBDestReadEnablesOr					0xb598
+#define PM3LBDestReadMode					0xb500
+#define PM3LBDestReadModeAnd					0xb580
+#define PM3LBDestReadModeOr					0xb588
+	#define PM3LBDestReadMode_Disable			0<<0
+	#define PM3LBDestReadMode_Enable			1<<0
+	#define PM3LBDestReadMode_StripePitch(p)		(((p)&0x7)<<2)
+	#define PM3LBDestReadMode_StripeHeight(h)		(((h)&0x7)<<5)
+	#define PM3LBDestReadMode_Layout			1<<8
+	#define PM3LBDestReadMode_Origin			1<<9
+	#define PM3LBDestReadMode_UserReadEnables		1<<10
+	#define PM3LBDestReadMode_Packed16			1<<11
+	#define PM3LBDestReadMode_Width(w)			(((w)&0xfff)<<12)
+#define PM3LBReadFormat						0x8888
+	#define PM3LBReadFormat_DepthWidth(w)			(((w)&0x3)<<0)
+	#define PM3LBReadFormat_StencilWidth(w)			(((w)&0xf)<<2)
+	#define PM3LBReadFormat_StencilPosition(p)		(((p)&0x1f)<<6)
+	#define PM3LBReadFormat_FCPWidth(w)			(((w)&0xf)<<11)
+	#define PM3LBReadFormat_FCPPosition(p)			(((p)&0x1f)<<15)
+	#define PM3LBReadFormat_GIDWidth(w)			(((w)&0x7)<<20)
+	#define PM3LBReadFormat_GIDPosition(p)			(((p)&0x1f)<<23)
+#define PM3LBSourceReadBufferAddr				0xb528
+#define PM3LBSourceReadBufferOffset				0xb530
+#define PM3LBSourceReadMode					0xb520
+#define PM3LBSourceReadModeAnd					0xb5a0
+#define PM3LBSourceReadModeOr					0xb5a8
+	#define PM3LBSourceReadMode_Enable			1<<0
+	#define PM3LBSourceReadMode_StripePitch(p)		(((p)&0x7)<<2)
+	#define PM3LBSourceReadMode_StripeHeight(h)		(((h)&0x7)<<5)
+	#define PM3LBSourceReadMode_Layout			1<<8
+	#define PM3LBSourceReadMode_Origin			1<<9
+	#define PM3LBSourceReadMode_Packed16			1<<10
+	#define PM3LBSourceReadMode_Width(w)			(((w)&0xfff)<<11)
+#define PM3LBStencil						0x88a8
+#define PM3LBWriteBufferAddr					0xb540
+#define PM3LBWriteBufferOffset					0xb548
+#define PM3LBWriteFormat					0x88c8
+	#define PM3LBWriteFormat_DepthWidth(w)			(((w)&0x3)<<0)
+	#define PM3LBWriteFormat_StencilWidth(w)		(((w)&0xf)<<2)
+	#define PM3LBWriteFormat_StencilPosition(p)		(((p)&0x1f)<<6)
+	#define PM3LBWriteFormat_GIDWidth(w)			(((w)&0x7)<<20)
+	#define PM3LBWriteFormat_GIDPosition(p)			(((p)&0x1f)<<23)
+#define PM3LBWriteMode						0x88c0
+#define PM3LBWriteModeAnd					0xac80
+#define PM3LBWriteModeOr					0xac88
+	#define PM3LBWriteMode_WriteDisable			0<<0
+	#define PM3LBWriteMode_WriteEnable			1<<0
+	#define PM3LBWriteMode_StripePitch(p)			(((p)&0x7)<<3)
+	#define PM3LBWriteMode_StripeHeight(h)			(((h)&0x7)<<6)
+	#define PM3LBWriteMode_Layout				1<<9
+	#define PM3LBWriteMode_Origin				1<<10
+	#define PM3LBWriteMode_Packed16				1<<11
+	#define PM3LBWriteMode_Width(w)				(((w)&0xfff)<<12)
+/* ... */
+#define PM3LineStippleMode					0x81a8
+#define PM3LineStippleModeAnd					0xabc0
+#define PM3LineStippleModeOr					0xabc8
+#define PM3LoadLineStippleCounters				0x81b0
+/* ... */
+#define PM3LogicalOpMode					0x8828
+#define PM3LogicalOpModeAnd					0xace0
+#define PM3LogicalOpModeOr					0xace8
+	#define PM3LogicalOpMode_Disable			(0<<0)
+	#define PM3LogicalOpMode_Enable				(1<<0)
+	#define PM3LogicalOpMode_LogicOp(op)			(((op)&0xf)<<1)
+	#define PM3LogicalOpMode_UseConstantWriteData_Disable	(0<<5)
+	#define PM3LogicalOpMode_UseConstantWriteData_Enable	(1<<5)
+	#define PM3LogicalOpMode_Background_Disable		(0<<6)
+	#define PM3LogicalOpMode_Background_Enable		(1<<6)
+	#define PM3LogicalOpMode_Background_LogicOp(op)		(((op)&0xf)<<7)
+	#define PM3LogicalOpMode_UseConstantSource_Disable	(0<<11)
+	#define PM3LogicalOpMode_UseConstantSource_Enable	(1<<11)
+
+/* ... */
+#define PM3LUT							0x8e80
+/* ... */
+#define PM3LUT							0x8e80
+#define PM3LUTAddress						0x84d0
+#define PM3LUTData						0x84c8
+#define PM3LUTIndex						0x84c0
+#define PM3LUTMode						0xb378
+#define PM3LUTModeAnd						0xad70
+#define PM3LUTModeOr						0xad78
+#define PM3LUTTransfer						0x84d8
+/* ... */
+#define PM3PixelSize						0x80c0
+	#define PM3PixelSize_GLOBAL_32BIT			(0<<0)
+	#define PM3PixelSize_GLOBAL_16BIT			(1<<0)
+	#define PM3PixelSize_GLOBAL_8BIT			(2<<0)
+	#define PM3PixelSize_RASTERIZER_32BIT			(0<<2)
+	#define PM3PixelSize_RASTERIZER_16BIT			(1<<2)
+	#define PM3PixelSize_RASTERIZER_8BIT			(2<<2)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_32BIT		(0<<4)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_16BIT		(1<<4)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_8BIT		(2<<4)
+	#define PM3PixelSize_TEXTURE_32BIT			(0<<6)
+	#define PM3PixelSize_TEXTURE_16BIT			(1<<6)
+	#define PM3PixelSize_TEXTURE_8BIT			(2<<6)
+	#define PM3PixelSize_LUT_32BIT				(0<<8)
+	#define PM3PixelSize_LUT_16BIT				(1<<8)
+	#define PM3PixelSize_LUT_8BIT				(2<<8)
+	#define PM3PixelSize_FRAMEBUFFER_32BIT			(0<<10)
+	#define PM3PixelSize_FRAMEBUFFER_16BIT			(1<<10)
+	#define PM3PixelSize_FRAMEBUFFER_8BIT			(2<<10)
+	#define PM3PixelSize_LOGICAL_OP_32BIT			(0<<12)
+	#define PM3PixelSize_LOGICAL_OP_16BIT			(1<<12)
+	#define PM3PixelSize_LOGICAL_OP_8BIT			(2<<12)
+	#define PM3PixelSize_LOCALBUFFER_32BIT			(0<<14)
+	#define PM3PixelSize_LOCALBUFFER_16BIT			(1<<14)
+	#define PM3PixelSize_LOCALBUFFER_8BIT			(2<<14)
+	#define PM3PixelSize_SETUP_32BIT			(0<<16)
+	#define PM3PixelSize_SETUP_16BIT			(1<<16)
+	#define PM3PixelSize_SETUP_8BIT				(2<<16)
+	#define PM3PixelSize_GLOBAL				(0<<31)
+	#define PM3PixelSize_INDIVIDUAL				(1<<31)
+/* ... */
+#define PM3Render						0x8038
+	#define PM3Render_AreaStipple_Disable			(0<<0)
+	#define PM3Render_AreaStipple_Enable			(1<<0)
+	#define PM3Render_LineStipple_Disable			(0<<1)
+	#define PM3Render_LineStipple_Enable			(1<<1)
+	#define PM3Render_ResetLine_Disable			(0<<2)
+	#define PM3Render_ResetLine_Enable			(1<<2)
+	#define PM3Render_FastFill_Disable			(0<<3)
+	#define PM3Render_FastFill_Enable			(1<<3)
+	#define PM3Render_Primitive_Line			(0<<6)
+	#define PM3Render_Primitive_Trapezoid			(1<<6)
+	#define PM3Render_Primitive_Point			(2<<6)
+	#define PM3Render_Antialias_Disable			(0<<8)
+	#define PM3Render_Antialias_Enable			(1<<8)
+	#define PM3Render_Antialias_SubPixelRes_4x4		(0<<9)
+	#define PM3Render_Antialias_SubPixelRes_8x8		(1<<9)
+	#define PM3Render_UsePointTable_Disable			(0<<10)
+	#define PM3Render_UsePointTable_Enable			(1<<10)
+	#define PM3Render_SyncOnbitMask_Disable			(0<<11)
+	#define PM3Render_SyncOnBitMask_Enable			(1<<11)
+	#define PM3Render_SyncOnHostData_Disable		(0<<12)
+	#define PM3Render_SyncOnHostData_Enable			(1<<12)
+	#define PM3Render_Texture_Disable			(0<<13)
+	#define PM3Render_Texture_Enable			(1<<13)
+	#define PM3Render_Fog_Disable				(0<<14)
+	#define PM3Render_Fog_Enable				(1<<14)
+	#define PM3Render_Coverage_Disable			(0<<15)
+	#define PM3Render_Coverage_Enable			(1<<15)
+	#define PM3Render_SubPixelCorrection_Disable		(0<<16)
+	#define PM3Render_SubPixelCorrection_Enable		(1<<16)
+	#define PM3Render_SpanOperation_Disable			(0<<18)
+	#define PM3Render_SpanOperation_Enable			(1<<18)
+	#define PM3Render_FBSourceRead_Disable			(0<<27)
+	#define PM3Render_FBSourceRead_Enable			(1<<27)
+#define PM3RasterizerMode					0x80a0
+#define PM3RasterizerModeAnd					0xaba0
+#define PM3RasterizerModeOr					0xabb8
+#define PM3RectangleHeight					0x94e0
+#define PM3Render						0x8038
+#define PM3RepeatLine						0x9328
+#define PM3ResetPickResult					0x8c20
+#define PM3RLEMask						0x8c48
+#define PM3RouterMode						0x8840
+#define PM3RStart						0x8780
+#define PM3S1Start						0x8400
+#define PM3aveLineStippleCounters				0x81c0
+#define PM3ScissorMaxXY						0x8190
+#define PM3ScissorMinXY						0x8188
+#define PM3ScissorMode						0x8180
+#define PM3ScissorModeAnd					0xabb0
+#define PM3ScissorModeOr					0xabb8
+#define PM3ScreenSize						0x8198
+#define PM3Security						0x8908
+#define PM3SetLogicalTexturePage				0xb360
+#define PM3SizeOfFramebuffer					0xb0a8
+#define PM3SStart						0x8388
+#define PM3StartXDom						0x8000
+#define PM3StartXSub						0x8010
+#define PM3StartY						0x8020
+/* ... */
+#define PM3SpanColorMask					0x8168
+/* ... */
+#define PM3TextureApplicationMode				0x8680
+#define PM3TextureApplicationModeAnd				0xac50
+#define PM3TextureApplicationModeOr				0xac58
+#define PM3TextureBaseAddr					0x8500
+#define PM3TextureCacheControl					0x8490
+#define PM3TextureChromaLower0					0x84f0
+#define PM3TextureChromaLower1					0x8608
+#define PM3TextureChromaUpper0					0x84e8
+#define PM3TextureChromaUpper1					0x8600
+#define PM3TextureCompositeAlphaMode0				0xb310
+#define PM3TextureCompositeAlphaMode0And			0xb390
+#define PM3TextureCompositeAlphaMode0Or				0xb398
+#define PM3TextureCompositeAlphaMode1				0xb320
+#define PM3TextureCompositeAlphaMode1And			0xb3b0
+#define PM3TextureCompositeAlphaMode1Or				0xb3b8
+#define PM3TextureCompositeColorMode0				0xb308
+#define PM3TextureCompositeColorMode0And			0xb380
+#define PM3TextureCompositeColorMode0Or				0xb388
+#define PM3TextureCompositeColorMode1				0xb318
+#define PM3TextureCompositeColorMode1And			0xb3a0
+#define PM3TextureCompositeColorMode1Or				0xb3a8
+#define PM3TextureCompositeFactor0				0xb328
+#define PM3TextureCompositeFactor1				0xb330
+#define PM3TextureCompositeMode					0xb300
+#define PM3TextureCoordMode					0x8380
+#define PM3TextureCoordModeAnd					0xac20
+#define PM3TextureCoordModeOr					0xac28
+#define PM3TextureData						0x88e8
+/*
+#define PM3TextureDownloadControl				0x0108
+*/
+#define PM3TextureDownloadOffset				0x88f0
+#define PM3TextureEnvColor					0x8688
+#define PM3TextureFilterMode					0x84e0
+#define PM3TextureFilterModeAnd					0xad50
+#define PM3TextureFilterModeOr					0xad58
+#define PM3TextureIndexMode0					0xb338
+#define PM3TextureIndexMode0And					0xb3c0
+#define PM3TextureIndexMode0Or					0xb3c8
+#define PM3TextureIndexMode1					0xb340
+#define PM3TextureIndexMode1And					0xb3d0
+#define PM3TextureIndexMode1Or					0xb3d8
+/* ... */
+#define PM3TextureMapSize                                       0xb428
+#define PM3TextureMapWidth0                                     0x8580
+#define PM3TextureMapWidth1                                     0x8588
+        #define PM3TextureMapWidth_Width(w)             ((w&0xfff)<<0)
+        #define PM3TextureMapWidth_BorderLayout                 (1<<12)
+        #define PM3TextureMapWidth_Layout_Linear                (0<<13)
+        #define PM3TextureMapWidth_Layout_Patch64               (1<<13)
+        #define PM3TextureMapWidth_Layout_Patch32_2             (2<<13)
+        #define PM3TextureMapWidth_Layout_Patch2                (3<<13)
+        #define PM3TextureMapWidth_HostTexture                  (1<<15)
+#define PM3TextureReadMode0                                     0xb400
+#define PM3TextureReadMode0And                                  0xac30
+#define PM3TextureReadMode0Or                                   0xac38
+#define PM3TextureReadMode1                                     0xb408
+#define PM3TextureReadMode1And                                  0xad40
+#define PM3TextureReadMode1Or                                   0xad48
+/* ... */
+#define PM3WaitForCompletion					0x80b8
+#define PM3Window						0x8980
+	#define PM3Window_ForceLBUpdate				1<<3
+	#define PM3Window_LBUpdateSource			1<<4
+	#define PM3Window_FrameCount(c)				(((c)&0xff)<<9
+	#define PM3Window_StencilFCP				1<<17
+	#define PM3Window_DepthFCP				1<<18
+	#define PM3Window_OverrideWriteFiltering		1<<19
+#define PM3WindowAnd						0xab80
+#define PM3WindowOr						0xab88
+#define PM3WindowOrigin						0x81c8
+#define PM3XBias						0x9480
+#define PM3YBias						0x9488
+#define PM3YLimits						0x80a8
+#define PM3UVMode						0x8f00
+#define PM3ZFogBias						0x86b8
+#define PM3ZStart						0xadd8
+#define PM3ZStartL						0x89b8
+#define PM3ZStartU						0x89b0
+
+
+/**********************************************
+*  GLINT Permedia3 2D setup Unit              *
+***********************************************/
+#define PM3Config2D						0xb618
+	#define PM3Config2D_OpaqueSpan				1<<0
+	#define PM3Config2D_MultiRXBlit				1<<1
+	#define PM3Config2D_UserScissorEnable			1<<2
+	#define PM3Config2D_FBDestReadEnable			1<<3
+	#define PM3Config2D_AlphaBlendEnable			1<<4
+	#define PM3Config2D_DitherEnable			1<<5
+	#define PM3Config2D_ForegroundROPEnable			1<<6
+	#define PM3Config2D_ForegroundROP(rop)		(((rop)&0xf)<<7)
+	#define PM3Config2D_BackgroundROPEnable			1<<11
+	#define PM3Config2D_BackgroundROP(rop)		(((rop)&0xf)<<12)
+	#define PM3Config2D_UseConstantSource			1<<16
+	#define PM3Config2D_FBWriteEnable			1<<17
+	#define PM3Config2D_Blocking				1<<18
+	#define PM3Config2D_ExternalSourceData			1<<19
+	#define PM3Config2D_LUTModeEnable			1<<20
+#define PM3DownloadGlyphwidth					0xb658
+	#define PM3DownloadGlyphwidth_GlyphWidth(gw)	((gw)&0xffff)
+#define PM3DownloadTarget					0xb650
+	#define PM3DownloadTarget_TagName(tag)		((tag)&0x1fff)
+#define PM3GlyphData						0xb660
+#define PM3GlyphPosition					0xb608
+	#define PM3GlyphPosition_XOffset(x)		((x)&0xffff)
+	#define PM3GlyphPosition_YOffset(y)		(((y)&0xffff)<<16)
+#define PM3Packed4Pixels					0xb668
+#define PM3Packed8Pixels					0xb630
+#define PM3Packed16Pixels					0xb638
+#define PM3RectanglePosition					0xb600
+	#define PM3RectanglePosition_XOffset(x)		((x)&0xffff)
+	#define PM3RectanglePosition_YOffset(y)		(((y)&0xffff)<<16)
+#define PM3Render2D						0xb640
+	#define PM3Render2D_Width(w)			((w)&0x0fff)
+	#define PM3Render2D_Operation_Normal			0<<12
+	#define PM3Render2D_Operation_SyncOnHostData		1<<12
+	#define PM3Render2D_Operation_SyncOnBitMask		2<<12
+	#define PM3Render2D_Operation_PatchOrderRendering	3<<12
+	#define PM3Render2D_FBSourceReadEnable			1<<14
+	#define PM3Render2D_SpanOperation			1<<15
+	#define PM3Render2D_Height(h)			(((h)&0x0fff)<<16)
+	#define PM3Render2D_XPositive				1<<28
+	#define PM3Render2D_YPositive				1<<29
+	#define PM3Render2D_AreaStippleEnable			1<<30
+	#define PM3Render2D_TextureEnable			1<<31
+#define PM3Render2DGlyph					0xb648
+	#define PM3Render2DGlyph_Width(w)		((w)&0x7f)
+	#define PM3Render2DGlyph_Height(h)		(((h)&0x7f)<<7)
+	#define PM3Render2DGlyph_XOffset(x)		(((x)&0x1ff)<<14)
+	#define PM3Render2DGlyph_YOffset(y)		(((y)&0x1ff)<<23)
+#define PM3RenderPatchOffset					0xb610
+	#define PM3RenderPatchOffset_XOffset(x)		((x)&0xffff)
+	#define PM3RenderPatchOffset_YOffset(y)		(((y)&0xffff)<<16)
+#define PM3RLCount						0xb678
+	#define PM3RLCount_Count(c)			((c)&0x0fff)
+#define PM3RLData						0xb670
+
+/**********************************************
+*  GLINT Permedia3 Alias Register             *
+***********************************************/
+#define PM3FillBackgroundColor                                  0x8330
+#define PM3FillConfig2D0                                        0x8338
+#define PM3FillConfig2D1                                        0x8360
+	#define PM3FillConfig2D_OpaqueSpan                      1<<0
+	#define PM3FillConfig2D_MultiRXBlit                     1<<1
+	#define PM3FillConfig2D_UserScissorEnable               1<<2
+	#define PM3FillConfig2D_FBDestReadEnable                1<<3
+	#define PM3FillConfig2D_AlphaBlendEnable                1<<4
+	#define PM3FillConfig2D_DitherEnable                    1<<5
+	#define PM3FillConfig2D_ForegroundROPEnable             1<<6
+	#define PM3FillConfig2D_ForegroundROP(rop)              (((rop)&0xf)<<7)
+	#define PM3FillConfig2D_BackgroundROPEnable             1<<11
+	#define PM3FillConfig2D_BackgroundROP(rop)              (((rop)&0xf)<<12)
+	#define PM3FillConfig2D_UseConstantSource               1<<16
+	#define PM3FillConfig2D_FBWriteEnable                   1<<17
+	#define PM3FillConfig2D_Blocking                        1<<18
+	#define PM3FillConfig2D_ExternalSourceData              1<<19
+	#define PM3FillConfig2D_LUTModeEnable                   1<<20
+#define PM3FillFBDestReadBufferAddr                             0x8310
+#define PM3FillFBSourceReadBufferAddr                           0x8308
+#define PM3FillFBSourceReadBufferOffset                         0x8340
+	#define PM3FillFBSourceReadBufferOffset_XOffset(x)     ((x)&0xffff)
+	#define PM3FillFBSourceReadBufferOffset_YOffset(y)      (((y)&0xffff)<<16)
+#define PM3FillFBWriteBufferAddr                                0x8300
+#define PM3FillForegroundColor0                                 0x8328
+#define PM3FillForegroundColor1                                 0x8358
+#define PM3FillGlyphPosition                                    0x8368
+        #define PM3FillGlyphPosition_XOffset(x)                        ((x)&0xffff)
+	#define PM3FillGlyphPosition_YOffset(y)                        (((y)&0xffff)<<16)
+#define PM3FillRectanglePosition                                0x8348
+	#define PM3FillRectanglePosition_XOffset(x)            ((x)&0xffff)
+	#define PM3FillRectanglePosition_YOffset(y)            (((y)&0xffff)<<16)
+
+#define PM3_REGS_SIZE           0x10000
+#define PM3_MAX_PIXCLOCK        300000
+/* a few more useful registers & regs value... */
+#define PM3Sync 0x8c40
+        #define PM3Sync_Tag 0x188
+#define PM3FilterMode 0x8c00
+        #define PM3FilterModeSync 0x400
+#define PM3OutputFifo 0x2000
+#define PM3StatisticMode 0x8c08
+#define PM3AreaStippleMode 0x81a0
+        #define AreaStipplePattern0					(0x8200)
+        #define AreaStipplePattern1					(0x8208)
+        #define AreaStipplePattern2					(0x8210)
+        #define AreaStipplePattern3					(0x8218)
+        #define AreaStipplePattern4					(0x8220)
+        #define AreaStipplePattern5					(0x8228)
+        #define AreaStipplePattern6					(0x8230)
+        #define AreaStipplePattern7					(0x8238)
+        #define AreaStipplePattern8					(0x8240)
+        #define AreaStipplePattern9					(0x8248)
+        #define AreaStipplePattern10					(0x8250)
+        #define AreaStipplePattern11					(0x8258)
+        #define AreaStipplePattern12					(0x8260)
+        #define AreaStipplePattern13					(0x8268)
+        #define AreaStipplePattern14					(0x8270)
+        #define AreaStipplePattern15					(0x8278)
+        #define AreaStipplePattern16					(0x8280)
+        #define AreaStipplePattern17					(0x8288)
+        #define AreaStipplePattern18					(0x8290)
+        #define AreaStipplePattern19					(0x8298)
+        #define AreaStipplePattern20					(0x82a0)
+        #define AreaStipplePattern21					(0x82a8)
+        #define AreaStipplePattern22					(0x82b0)
+        #define AreaStipplePattern23					(0x82b8)
+        #define AreaStipplePattern24					(0x82c0)
+        #define AreaStipplePattern25					(0x82c8)
+        #define AreaStipplePattern26					(0x82d0)
+        #define AreaStipplePattern27					(0x82d8)
+        #define AreaStipplePattern28					(0x82eo)
+        #define AreaStipplePattern29					(0x82e8)
+        #define AreaStipplePattern30					(0x82f0)
+        #define AreaStipplePattern31					(0x82f8)
+        #define AreaStipplePattern_indexed(i)             (0x8200 + ((i) * 0x8))
+
+#define PM3DepthMode 0x89a0
+#define PM3StencilMode 0x8988
+#define PM3StencilData 0x8990
+#define PM3TextureReadMode 0x8670
+#define PM3FogMode 0x8690
+#define PM3ChromaTestMode 0x8f18
+#define PM3YUVMode 0x8f00
+#define PM3BitMaskPattern 0x8068
+
+/* ***************************** */
+/* ***** pm3fb IOCTL const ***** */
+/* ***************************** */
+/* debug-only IOCTL */
+#define PM3FBIO_CLEARMEMORY 0x504D3300 /* 'PM3\000' */
+#define PM3FBIO_CLEARCMAP   0x504D3301 /* 'PM3\001' */
+/* common use IOCTL */
+#define PM3FBIO_RESETCHIP   0x504D33FF /* 'PM3\377' */
+
+/* ***************************************** */
+/* ***** pm3fb useful define and macro ***** */
+/* ***************************************** */
+
+/* permedia3 -specific definitions */
+#define PM3_SCALE_TO_CLOCK(pr, fe, po) ((2 * PM3_REF_CLOCK * fe) / (pr * (1 << (po))))
+
+/* in case it's not in linux/pci.h */
+#ifndef PCI_DEVICE_ID_3DLABS_PERMEDIA3
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA3 0x000a
+#endif
+
+/* max number of simultaneous board */
+/* warning : make sure module array def's are coherent with PM3_MAX_BOARD */
+#define PM3_MAX_BOARD 4
+#define PM3_MAX_BOARD_MODULE_ARRAY_SHORT "1-4h"
+#define PM3_MAX_BOARD_MODULE_ARRAY_STRING "1-4s"
+
+/* max size of options */
+#define PM3_OPTIONS_SIZE 256
+
+/* max size of font name */
+#define PM3_FONTNAME_SIZE 40
+
+/* do we want accelerated console  */
+#define PM3FB_USE_ACCEL 1
+
+/* useful ? */
+#define CHAR_IS_NUM(a)  ((((a) >= '0') && ((a) <= '9')) ? 1 : 0)
+
+/* for driver debugging ONLY */
+/* 0 = assert only, 1 = error, 2 = info, 3+ = verbose */
+/* define PM3FB_MASTER_DEBUG 1 */
+#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3)
+#define PM3FB_TRACE
+#endif /* defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3) */
+
+#ifdef PM3FB_MASTER_DEBUG
+#define DPRINTK(l,a,b...) do { if ((l) <= PM3FB_MASTER_DEBUG) printk("pm3fb: %s: " a, __FUNCTION__ , ## b); } while (0)
+#define DASSERT(t,a,b...) do { if (!(t)) printk("pm3fb: _assert failed: %s: " a, __FUNCTION__ , ## b); } while (0)
+#ifdef PM3FB_TRACE
+#define DTRACE printk("pm3fb: _enter %s\n", __FUNCTION__)
+#else /* PM3FB_TRACE */
+#define DTRACE
+#endif /* PM3FB_TRACE */
+#else /* PM3FB_MASTER_DEBUG */
+#define DPRINTK(l,a,b...)
+#define DASSERT(t,a,b...)
+#define DTRACE
+#endif /* PM3FB_MASTER_DEBUG */
+
+#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
+#define PM3_SHOW_CUR_MODE pm3fb_show_cur_mode(l_fb_info)
+#else
+#define PM3_SHOW_CUR_MODE /* pm3fb_show_cur_mode() */
+#endif
+
+/* ******************************************** */
+/* ***** A bunch of register-access macro ***** */
+/* ******************************************** */
+
+#define PM3_WRITE_REG(r, v) fb_writel(v, (l_fb_info->vIOBase + r))
+#define PM3_READ_REG(r) fb_readl((l_fb_info->vIOBase + r))
+
+
+#define depth2bpp(d) ((d + 7L) & ~7L)
+#define depth2ByPP(d) (depth2bpp(d) / 8)
+
+#define depth_supported(d) ((d == 8) || (d == 12) || (d == 15) || (d == 16) || (d==32))
+
+
+#define PM3_WAIT(n) \
+do{ \
+	while(PM3_READ_REG(PM3InFIFOSpace)<(n)); \
+} while(0)
+
+#define PM3_DELAY(x) do { \
+        int delay = x; \
+        unsigned char tmp; \
+        while(delay--){tmp = PM3_READ_REG(PM3InFIFOSpace);}; \
+} while(0)
+
+#define PM3_SLOW_WRITE_REG(r,v)	\
+do{                             \
+    DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in slow write\n"); \
+	mb();                   \
+	PM3_WAIT(1);            \
+	mb();                   \
+    PM3_WRITE_REG(r,v);     \
+} while(0)
+
+#define PM3_SET_INDEX(index) \
+do{ \
+	PM3_SLOW_WRITE_REG(PM3RD_IndexHigh,(((index)>>8)&0xff)); \
+	PM3_SLOW_WRITE_REG(PM3RD_IndexLow,((index)&0xff)); \
+} while(0)
+
+#define PM3_WRITE_DAC_REG(r, v) \
+do { \
+     DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in write dac reg\n"); \
+     PM3_SET_INDEX(r); \
+     mb(); \
+     PM3_WRITE_REG(PM3RD_IndexedData, v); \
+} while (0)
+
+/* next one is really a function, added as a macro to be consistent */
+#define PM3_READ_DAC_REG(r) pm3fb_read_dac_reg(l_fb_info, r)
+
+
+#define PM3_COLOR(c) \
+do { \
+  if (l_fb_info->current_par->depth == 8) \
+    { \
+      c = (c & 0xFF); \
+      c = c | (c << 8); \
+    } \
+  if ((l_fb_info->current_par->depth == 8) || (depth2bpp(l_fb_info->current_par->depth) == 16)) \
+    { \
+      c = (c & 0xFFFF); \
+      c = c | (c << 16); \
+    } \
+} while (0)
+
+#endif /* PM3FB_H */
diff --git a/include/video/pmag-ba-fb.h b/include/video/pmag-ba-fb.h
new file mode 100644
index 000000000000..cebef073b9a3
--- /dev/null
+++ b/include/video/pmag-ba-fb.h
@@ -0,0 +1,24 @@
+/*
+ *      linux/drivers/video/pmag-ba-fb.h
+ *
+ *      TurboChannel PMAG-BA framebuffer card support,
+ *      Copyright (C) 1999,2000,2001 by
+ *      Michael Engel <engel@unix-ag.org>,
+ *      Karsten Merker <merker@linuxtag.org>
+ *      This file is subject to the terms and conditions of the GNU General
+ *      Public License.  See the file COPYING in the main directory of this
+ *      archive for more details.
+ */
+
+/*
+ * Bt459 RAM DAC register base offset (rel. to TC slot base address)
+ */
+
+#define PMAG_BA_BT459_OFFSET                    0x00200000
+
+/*
+ * Begin of PMAG-BA framebuffer memory relative to TC slot address,
+ * resolution is 1024x864x8
+ */
+
+#define PMAG_BA_ONBOARD_FBMEM_OFFSET    0x00000000
diff --git a/include/video/pmagb-b-fb.h b/include/video/pmagb-b-fb.h
new file mode 100644
index 000000000000..87b81a555139
--- /dev/null
+++ b/include/video/pmagb-b-fb.h
@@ -0,0 +1,32 @@
+/*
+ *      linux/drivers/video/pmagb-b-fb.h
+ *
+ *      TurboChannel PMAGB-B framebuffer card support,
+ *      Copyright (C) 1999, 2000, 2001 by
+ *      Michael Engel <engel@unix-ag.org> and 
+ *      Karsten Merker <merker@linuxtag.org>
+ *      This file is subject to the terms and conditions of the GNU General
+ *      Public License.  See the file COPYING in the main directory of this
+ *      archive for more details.
+ */
+
+
+/*
+ * Bt459 RAM DAC register base offset (rel. to TC slot base address)
+ */
+#define PMAGB_B_BT459_OFFSET			0x001C0000
+
+/*
+ * Begin of PMAGB-B framebuffer memory, resolution is configurable:
+ * 1024x864x8 or 1280x1024x8, settable by jumper on the card
+ */
+#define PMAGB_B_ONBOARD_FBMEM_OFFSET	0x00201000
+
+/*
+ * Bt459 register offsets, byte-wide registers
+ */
+
+#define BT459_ADR_LOW			BT459_OFFSET + 0x00	/* addr. low */
+#define BT459_ADR_HIGH			BT459_OFFSET + 0x04	/* addr. high */
+#define BT459_DATA			BT459_OFFSET + 0x08	/* r/w data */
+#define BT459_CMAP			BT459_OFFSET + 0x0C	/* color map */
diff --git a/include/video/radeon.h b/include/video/radeon.h
new file mode 100644
index 000000000000..83467e18f5e9
--- /dev/null
+++ b/include/video/radeon.h
@@ -0,0 +1,1985 @@
+#ifndef _RADEON_H
+#define _RADEON_H
+
+
+#define RADEON_REGSIZE			0x4000
+
+
+#define MM_INDEX                               0x0000  
+#define MM_DATA                                0x0004  
+#define BUS_CNTL                               0x0030  
+#define HI_STAT                                0x004C  
+#define BUS_CNTL1                              0x0034
+#define I2C_CNTL_1			       0x0094  
+#define CONFIG_CNTL                            0x00E0  
+#define CONFIG_MEMSIZE                         0x00F8  
+#define CONFIG_APER_0_BASE                     0x0100  
+#define CONFIG_APER_1_BASE                     0x0104  
+#define CONFIG_APER_SIZE                       0x0108  
+#define CONFIG_REG_1_BASE                      0x010C  
+#define CONFIG_REG_APER_SIZE                   0x0110  
+#define PAD_AGPINPUT_DELAY                     0x0164  
+#define PAD_CTLR_STRENGTH                      0x0168  
+#define PAD_CTLR_UPDATE                        0x016C
+#define PAD_CTLR_MISC                          0x0aa0
+#define AGP_CNTL                               0x0174
+#define BM_STATUS                              0x0160
+#define CAP0_TRIG_CNTL			       0x0950
+#define CAP1_TRIG_CNTL		               0x09c0
+#define VIPH_CONTROL			       0x0C40
+#define VENDOR_ID                              0x0F00  
+#define DEVICE_ID                              0x0F02  
+#define COMMAND                                0x0F04  
+#define STATUS                                 0x0F06  
+#define REVISION_ID                            0x0F08  
+#define REGPROG_INF                            0x0F09  
+#define SUB_CLASS                              0x0F0A  
+#define BASE_CODE                              0x0F0B  
+#define CACHE_LINE                             0x0F0C  
+#define LATENCY                                0x0F0D  
+#define HEADER                                 0x0F0E  
+#define BIST                                   0x0F0F  
+#define REG_MEM_BASE                           0x0F10  
+#define REG_IO_BASE                            0x0F14  
+#define REG_REG_BASE                           0x0F18
+#define ADAPTER_ID                             0x0F2C
+#define BIOS_ROM                               0x0F30
+#define CAPABILITIES_PTR                       0x0F34  
+#define INTERRUPT_LINE                         0x0F3C  
+#define INTERRUPT_PIN                          0x0F3D  
+#define MIN_GRANT                              0x0F3E  
+#define MAX_LATENCY                            0x0F3F  
+#define ADAPTER_ID_W                           0x0F4C  
+#define PMI_CAP_ID                             0x0F50  
+#define PMI_NXT_CAP_PTR                        0x0F51  
+#define PMI_PMC_REG                            0x0F52  
+#define PM_STATUS                              0x0F54  
+#define PMI_DATA                               0x0F57  
+#define AGP_CAP_ID                             0x0F58  
+#define AGP_STATUS                             0x0F5C  
+#define AGP_COMMAND                            0x0F60  
+#define AIC_CTRL                               0x01D0
+#define AIC_STAT                               0x01D4
+#define AIC_PT_BASE                            0x01D8
+#define AIC_LO_ADDR                            0x01DC  
+#define AIC_HI_ADDR                            0x01E0  
+#define AIC_TLB_ADDR                           0x01E4  
+#define AIC_TLB_DATA                           0x01E8  
+#define DAC_CNTL                               0x0058  
+#define DAC_CNTL2                              0x007c
+#define CRTC_GEN_CNTL                          0x0050  
+#define MEM_CNTL                               0x0140  
+#define MC_CNTL                                0x0140
+#define EXT_MEM_CNTL                           0x0144  
+#define MC_TIMING_CNTL                         0x0144
+#define MC_AGP_LOCATION                        0x014C  
+#define MEM_IO_CNTL_A0                         0x0178  
+#define MEM_REFRESH_CNTL                       0x0178
+#define MEM_INIT_LATENCY_TIMER                 0x0154  
+#define MC_INIT_GFX_LAT_TIMER                  0x0154
+#define MEM_SDRAM_MODE_REG                     0x0158  
+#define AGP_BASE                               0x0170  
+#define MEM_IO_CNTL_A1                         0x017C  
+#define MC_READ_CNTL_AB                        0x017C
+#define MEM_IO_CNTL_B0                         0x0180
+#define MC_INIT_MISC_LAT_TIMER                 0x0180
+#define MEM_IO_CNTL_B1                         0x0184
+#define MC_IOPAD_CNTL                          0x0184
+#define MC_DEBUG                               0x0188
+#define MC_STATUS                              0x0150  
+#define MEM_IO_OE_CNTL                         0x018C  
+#define MC_CHIP_IO_OE_CNTL_AB                  0x018C
+#define MC_FB_LOCATION                         0x0148  
+#define HOST_PATH_CNTL                         0x0130  
+#define MEM_VGA_WP_SEL                         0x0038  
+#define MEM_VGA_RP_SEL                         0x003C  
+#define HDP_DEBUG                              0x0138  
+#define SW_SEMAPHORE                           0x013C
+#define CRTC2_GEN_CNTL                         0x03f8  
+#define CRTC2_DISPLAY_BASE_ADDR                0x033c
+#define SURFACE_CNTL                           0x0B00  
+#define SURFACE0_LOWER_BOUND                   0x0B04  
+#define SURFACE1_LOWER_BOUND                   0x0B14  
+#define SURFACE2_LOWER_BOUND                   0x0B24  
+#define SURFACE3_LOWER_BOUND                   0x0B34  
+#define SURFACE4_LOWER_BOUND                   0x0B44  
+#define SURFACE5_LOWER_BOUND                   0x0B54
+#define SURFACE6_LOWER_BOUND                   0x0B64
+#define SURFACE7_LOWER_BOUND                   0x0B74
+#define SURFACE0_UPPER_BOUND                   0x0B08  
+#define SURFACE1_UPPER_BOUND                   0x0B18  
+#define SURFACE2_UPPER_BOUND                   0x0B28  
+#define SURFACE3_UPPER_BOUND                   0x0B38  
+#define SURFACE4_UPPER_BOUND                   0x0B48  
+#define SURFACE5_UPPER_BOUND                   0x0B58  
+#define SURFACE6_UPPER_BOUND                   0x0B68  
+#define SURFACE7_UPPER_BOUND                   0x0B78  
+#define SURFACE0_INFO                          0x0B0C  
+#define SURFACE1_INFO                          0x0B1C  
+#define SURFACE2_INFO                          0x0B2C  
+#define SURFACE3_INFO                          0x0B3C  
+#define SURFACE4_INFO                          0x0B4C  
+#define SURFACE5_INFO                          0x0B5C  
+#define SURFACE6_INFO                          0x0B6C
+#define SURFACE7_INFO                          0x0B7C
+#define SURFACE_ACCESS_FLAGS                   0x0BF8
+#define SURFACE_ACCESS_CLR                     0x0BFC  
+#define GEN_INT_CNTL                           0x0040  
+#define GEN_INT_STATUS                         0x0044  
+#define CRTC_EXT_CNTL                          0x0054
+#define RB3D_CNTL			       0x1C3C  
+#define WAIT_UNTIL                             0x1720  
+#define ISYNC_CNTL                             0x1724  
+#define RBBM_GUICNTL                           0x172C  
+#define RBBM_STATUS                            0x0E40  
+#define RBBM_STATUS_alt_1                      0x1740  
+#define RBBM_CNTL                              0x00EC  
+#define RBBM_CNTL_alt_1                        0x0E44  
+#define RBBM_SOFT_RESET                        0x00F0  
+#define RBBM_SOFT_RESET_alt_1                  0x0E48  
+#define NQWAIT_UNTIL                           0x0E50  
+#define RBBM_DEBUG                             0x0E6C
+#define RBBM_CMDFIFO_ADDR                      0x0E70
+#define RBBM_CMDFIFO_DATAL                     0x0E74
+#define RBBM_CMDFIFO_DATAH                     0x0E78  
+#define RBBM_CMDFIFO_STAT                      0x0E7C  
+#define CRTC_STATUS                            0x005C  
+#define GPIO_VGA_DDC                           0x0060  
+#define GPIO_DVI_DDC                           0x0064  
+#define GPIO_MONID                             0x0068  
+#define GPIO_CRT2_DDC                          0x006c
+#define PALETTE_INDEX                          0x00B0  
+#define PALETTE_DATA                           0x00B4  
+#define PALETTE_30_DATA                        0x00B8  
+#define CRTC_H_TOTAL_DISP                      0x0200  
+#define CRTC_H_SYNC_STRT_WID                   0x0204  
+#define CRTC_V_TOTAL_DISP                      0x0208  
+#define CRTC_V_SYNC_STRT_WID                   0x020C  
+#define CRTC_VLINE_CRNT_VLINE                  0x0210  
+#define CRTC_CRNT_FRAME                        0x0214
+#define CRTC_GUI_TRIG_VLINE                    0x0218
+#define CRTC_DEBUG                             0x021C
+#define CRTC_OFFSET_RIGHT                      0x0220  
+#define CRTC_OFFSET                            0x0224  
+#define CRTC_OFFSET_CNTL                       0x0228  
+#define CRTC_PITCH                             0x022C  
+#define OVR_CLR                                0x0230  
+#define OVR_WID_LEFT_RIGHT                     0x0234  
+#define OVR_WID_TOP_BOTTOM                     0x0238  
+#define DISPLAY_BASE_ADDR                      0x023C  
+#define SNAPSHOT_VH_COUNTS                     0x0240  
+#define SNAPSHOT_F_COUNT                       0x0244  
+#define N_VIF_COUNT                            0x0248  
+#define SNAPSHOT_VIF_COUNT                     0x024C  
+#define FP_CRTC_H_TOTAL_DISP                   0x0250  
+#define FP_CRTC_V_TOTAL_DISP                   0x0254  
+#define CRT_CRTC_H_SYNC_STRT_WID               0x0258
+#define CRT_CRTC_V_SYNC_STRT_WID               0x025C
+#define CUR_OFFSET                             0x0260
+#define CUR_HORZ_VERT_POSN                     0x0264  
+#define CUR_HORZ_VERT_OFF                      0x0268  
+#define CUR_CLR0                               0x026C  
+#define CUR_CLR1                               0x0270  
+#define FP_HORZ_VERT_ACTIVE                    0x0278  
+#define CRTC_MORE_CNTL                         0x027C  
+#define CRTC_H_CUTOFF_ACTIVE_EN                (1<<4)
+#define CRTC_V_CUTOFF_ACTIVE_EN                (1<<5)
+#define DAC_EXT_CNTL                           0x0280  
+#define FP_GEN_CNTL                            0x0284  
+#define FP_HORZ_STRETCH                        0x028C  
+#define FP_VERT_STRETCH                        0x0290  
+#define FP_H_SYNC_STRT_WID                     0x02C4  
+#define FP_V_SYNC_STRT_WID                     0x02C8  
+#define AUX_WINDOW_HORZ_CNTL                   0x02D8  
+#define AUX_WINDOW_VERT_CNTL                   0x02DC  
+//#define DDA_CONFIG			       0x02e0
+//#define DDA_ON_OFF			       0x02e4
+#define DVI_I2C_CNTL_1			       0x02e4
+#define GRPH_BUFFER_CNTL                       0x02F0
+#define GRPH2_BUFFER_CNTL                      0x03F0
+#define VGA_BUFFER_CNTL                        0x02F4
+#define OV0_Y_X_START                          0x0400
+#define OV0_Y_X_END                            0x0404  
+#define OV0_PIPELINE_CNTL                      0x0408  
+#define OV0_REG_LOAD_CNTL                      0x0410  
+#define OV0_SCALE_CNTL                         0x0420  
+#define OV0_V_INC                              0x0424  
+#define OV0_P1_V_ACCUM_INIT                    0x0428  
+#define OV0_P23_V_ACCUM_INIT                   0x042C  
+#define OV0_P1_BLANK_LINES_AT_TOP              0x0430  
+#define OV0_P23_BLANK_LINES_AT_TOP             0x0434  
+#define OV0_BASE_ADDR                          0x043C  
+#define OV0_VID_BUF0_BASE_ADRS                 0x0440  
+#define OV0_VID_BUF1_BASE_ADRS                 0x0444  
+#define OV0_VID_BUF2_BASE_ADRS                 0x0448  
+#define OV0_VID_BUF3_BASE_ADRS                 0x044C  
+#define OV0_VID_BUF4_BASE_ADRS                 0x0450
+#define OV0_VID_BUF5_BASE_ADRS                 0x0454
+#define OV0_VID_BUF_PITCH0_VALUE               0x0460
+#define OV0_VID_BUF_PITCH1_VALUE               0x0464  
+#define OV0_AUTO_FLIP_CNTRL                    0x0470  
+#define OV0_DEINTERLACE_PATTERN                0x0474  
+#define OV0_SUBMIT_HISTORY                     0x0478  
+#define OV0_H_INC                              0x0480  
+#define OV0_STEP_BY                            0x0484  
+#define OV0_P1_H_ACCUM_INIT                    0x0488  
+#define OV0_P23_H_ACCUM_INIT                   0x048C  
+#define OV0_P1_X_START_END                     0x0494  
+#define OV0_P2_X_START_END                     0x0498  
+#define OV0_P3_X_START_END                     0x049C  
+#define OV0_FILTER_CNTL                        0x04A0  
+#define OV0_FOUR_TAP_COEF_0                    0x04B0  
+#define OV0_FOUR_TAP_COEF_1                    0x04B4  
+#define OV0_FOUR_TAP_COEF_2                    0x04B8
+#define OV0_FOUR_TAP_COEF_3                    0x04BC
+#define OV0_FOUR_TAP_COEF_4                    0x04C0
+#define OV0_FLAG_CNTRL                         0x04DC  
+#define OV0_SLICE_CNTL                         0x04E0  
+#define OV0_VID_KEY_CLR_LOW                    0x04E4  
+#define OV0_VID_KEY_CLR_HIGH                   0x04E8  
+#define OV0_GRPH_KEY_CLR_LOW                   0x04EC  
+#define OV0_GRPH_KEY_CLR_HIGH                  0x04F0  
+#define OV0_KEY_CNTL                           0x04F4  
+#define OV0_TEST                               0x04F8  
+#define SUBPIC_CNTL                            0x0540  
+#define SUBPIC_DEFCOLCON                       0x0544  
+#define SUBPIC_Y_X_START                       0x054C  
+#define SUBPIC_Y_X_END                         0x0550  
+#define SUBPIC_V_INC                           0x0554  
+#define SUBPIC_H_INC                           0x0558  
+#define SUBPIC_BUF0_OFFSET                     0x055C
+#define SUBPIC_BUF1_OFFSET                     0x0560
+#define SUBPIC_LC0_OFFSET                      0x0564
+#define SUBPIC_LC1_OFFSET                      0x0568  
+#define SUBPIC_PITCH                           0x056C  
+#define SUBPIC_BTN_HLI_COLCON                  0x0570  
+#define SUBPIC_BTN_HLI_Y_X_START               0x0574  
+#define SUBPIC_BTN_HLI_Y_X_END                 0x0578  
+#define SUBPIC_PALETTE_INDEX                   0x057C  
+#define SUBPIC_PALETTE_DATA                    0x0580  
+#define SUBPIC_H_ACCUM_INIT                    0x0584  
+#define SUBPIC_V_ACCUM_INIT                    0x0588  
+#define DISP_MISC_CNTL                         0x0D00  
+#define DAC_MACRO_CNTL                         0x0D04  
+#define DISP_PWR_MAN                           0x0D08  
+#define DISP_TEST_DEBUG_CNTL                   0x0D10  
+#define DISP_HW_DEBUG                          0x0D14  
+#define DAC_CRC_SIG1                           0x0D18
+#define DAC_CRC_SIG2                           0x0D1C
+#define OV0_LIN_TRANS_A                        0x0D20
+#define OV0_LIN_TRANS_B                        0x0D24  
+#define OV0_LIN_TRANS_C                        0x0D28  
+#define OV0_LIN_TRANS_D                        0x0D2C  
+#define OV0_LIN_TRANS_E                        0x0D30  
+#define OV0_LIN_TRANS_F                        0x0D34  
+#define OV0_GAMMA_0_F                          0x0D40  
+#define OV0_GAMMA_10_1F                        0x0D44  
+#define OV0_GAMMA_20_3F                        0x0D48  
+#define OV0_GAMMA_40_7F                        0x0D4C  
+#define OV0_GAMMA_380_3BF                      0x0D50  
+#define OV0_GAMMA_3C0_3FF                      0x0D54  
+#define DISP_MERGE_CNTL                        0x0D60  
+#define DISP_OUTPUT_CNTL                       0x0D64  
+#define DISP_LIN_TRANS_GRPH_A                  0x0D80  
+#define DISP_LIN_TRANS_GRPH_B                  0x0D84
+#define DISP_LIN_TRANS_GRPH_C                  0x0D88
+#define DISP_LIN_TRANS_GRPH_D                  0x0D8C
+#define DISP_LIN_TRANS_GRPH_E                  0x0D90  
+#define DISP_LIN_TRANS_GRPH_F                  0x0D94  
+#define DISP_LIN_TRANS_VID_A                   0x0D98  
+#define DISP_LIN_TRANS_VID_B                   0x0D9C  
+#define DISP_LIN_TRANS_VID_C                   0x0DA0  
+#define DISP_LIN_TRANS_VID_D                   0x0DA4  
+#define DISP_LIN_TRANS_VID_E                   0x0DA8  
+#define DISP_LIN_TRANS_VID_F                   0x0DAC  
+#define RMX_HORZ_FILTER_0TAP_COEF              0x0DB0  
+#define RMX_HORZ_FILTER_1TAP_COEF              0x0DB4  
+#define RMX_HORZ_FILTER_2TAP_COEF              0x0DB8  
+#define RMX_HORZ_PHASE                         0x0DBC  
+#define DAC_EMBEDDED_SYNC_CNTL                 0x0DC0  
+#define DAC_BROAD_PULSE                        0x0DC4  
+#define DAC_SKEW_CLKS                          0x0DC8
+#define DAC_INCR                               0x0DCC
+#define DAC_NEG_SYNC_LEVEL                     0x0DD0
+#define DAC_POS_SYNC_LEVEL                     0x0DD4  
+#define DAC_BLANK_LEVEL                        0x0DD8  
+#define CLOCK_CNTL_INDEX                       0x0008  
+#define CLOCK_CNTL_DATA                        0x000C  
+#define CP_RB_CNTL                             0x0704  
+#define CP_RB_BASE                             0x0700  
+#define CP_RB_RPTR_ADDR                        0x070C  
+#define CP_RB_RPTR                             0x0710  
+#define CP_RB_WPTR                             0x0714  
+#define CP_RB_WPTR_DELAY                       0x0718  
+#define CP_IB_BASE                             0x0738  
+#define CP_IB_BUFSZ                            0x073C  
+#define SCRATCH_REG0                           0x15E0  
+#define GUI_SCRATCH_REG0                       0x15E0  
+#define SCRATCH_REG1                           0x15E4  
+#define GUI_SCRATCH_REG1                       0x15E4  
+#define SCRATCH_REG2                           0x15E8
+#define GUI_SCRATCH_REG2                       0x15E8
+#define SCRATCH_REG3                           0x15EC
+#define GUI_SCRATCH_REG3                       0x15EC  
+#define SCRATCH_REG4                           0x15F0  
+#define GUI_SCRATCH_REG4                       0x15F0  
+#define SCRATCH_REG5                           0x15F4  
+#define GUI_SCRATCH_REG5                       0x15F4  
+#define SCRATCH_UMSK                           0x0770  
+#define SCRATCH_ADDR                           0x0774  
+#define DP_BRUSH_FRGD_CLR                      0x147C  
+#define DP_BRUSH_BKGD_CLR                      0x1478
+#define DST_LINE_START                         0x1600
+#define DST_LINE_END                           0x1604  
+#define SRC_OFFSET                             0x15AC  
+#define SRC_PITCH                              0x15B0
+#define SRC_TILE                               0x1704
+#define SRC_PITCH_OFFSET                       0x1428
+#define SRC_X                                  0x1414  
+#define SRC_Y                                  0x1418  
+#define SRC_X_Y                                0x1590  
+#define SRC_Y_X                                0x1434  
+#define DST_Y_X				       0x1438
+#define DST_WIDTH_HEIGHT		       0x1598
+#define DST_HEIGHT_WIDTH		       0x143c
+#define DST_OFFSET                             0x1404
+#define SRC_CLUT_ADDRESS                       0x1780  
+#define SRC_CLUT_DATA                          0x1784  
+#define SRC_CLUT_DATA_RD                       0x1788  
+#define HOST_DATA0                             0x17C0  
+#define HOST_DATA1                             0x17C4  
+#define HOST_DATA2                             0x17C8  
+#define HOST_DATA3                             0x17CC  
+#define HOST_DATA4                             0x17D0  
+#define HOST_DATA5                             0x17D4  
+#define HOST_DATA6                             0x17D8  
+#define HOST_DATA7                             0x17DC
+#define HOST_DATA_LAST                         0x17E0
+#define DP_SRC_ENDIAN                          0x15D4
+#define DP_SRC_FRGD_CLR                        0x15D8  
+#define DP_SRC_BKGD_CLR                        0x15DC  
+#define SC_LEFT                                0x1640  
+#define SC_RIGHT                               0x1644  
+#define SC_TOP                                 0x1648  
+#define SC_BOTTOM                              0x164C  
+#define SRC_SC_RIGHT                           0x1654  
+#define SRC_SC_BOTTOM                          0x165C  
+#define DP_CNTL                                0x16C0  
+#define DP_CNTL_XDIR_YDIR_YMAJOR               0x16D0  
+#define DP_DATATYPE                            0x16C4  
+#define DP_MIX                                 0x16C8  
+#define DP_WRITE_MSK                           0x16CC  
+#define DP_XOP                                 0x17F8  
+#define CLR_CMP_CLR_SRC                        0x15C4
+#define CLR_CMP_CLR_DST                        0x15C8
+#define CLR_CMP_CNTL                           0x15C0
+#define CLR_CMP_MSK                            0x15CC  
+#define DSTCACHE_MODE                          0x1710  
+#define DSTCACHE_CTLSTAT                       0x1714  
+#define DEFAULT_PITCH_OFFSET                   0x16E0  
+#define DEFAULT_SC_BOTTOM_RIGHT                0x16E8  
+#define DEFAULT_SC_TOP_LEFT                    0x16EC
+#define SRC_PITCH_OFFSET                       0x1428
+#define DST_PITCH_OFFSET                       0x142C
+#define DP_GUI_MASTER_CNTL                     0x146C  
+#define SC_TOP_LEFT                            0x16EC  
+#define SC_BOTTOM_RIGHT                        0x16F0  
+#define SRC_SC_BOTTOM_RIGHT                    0x16F4  
+#define RB2D_DSTCACHE_MODE		       0x3428
+#define RB2D_DSTCACHE_CTLSTAT		       0x342C
+#define LVDS_GEN_CNTL			       0x02d0
+#define LVDS_PLL_CNTL			       0x02d4
+#define FP2_GEN_CNTL                           0x0288
+#define TMDS_CNTL                              0x0294
+#define TMDS_CRC			       0x02a0
+#define TMDS_TRANSMITTER_CNTL		       0x02a4
+#define MPP_TB_CONFIG            	       0x01c0
+#define PAMAC0_DLY_CNTL                        0x0a94
+#define PAMAC1_DLY_CNTL                        0x0a98
+#define PAMAC2_DLY_CNTL                        0x0a9c
+#define FW_CNTL                                0x0118
+#define FCP_CNTL                               0x0910
+#define VGA_DDA_ON_OFF                         0x02ec
+#define TV_MASTER_CNTL                         0x0800
+
+//#define BASE_CODE			       0x0f0b
+#define BIOS_0_SCRATCH			       0x0010
+#define BIOS_1_SCRATCH			       0x0014
+#define BIOS_2_SCRATCH			       0x0018
+#define BIOS_3_SCRATCH			       0x001c
+#define BIOS_4_SCRATCH			       0x0020
+#define BIOS_5_SCRATCH			       0x0024
+#define BIOS_6_SCRATCH			       0x0028
+#define BIOS_7_SCRATCH			       0x002c
+
+#define HDP_SOFT_RESET                         (1 << 26)
+
+#define TV_DAC_CNTL                            0x088c
+#define GPIOPAD_MASK                           0x0198
+#define GPIOPAD_A                              0x019c
+#define GPIOPAD_EN                             0x01a0
+#define GPIOPAD_Y                              0x01a4
+#define ZV_LCDPAD_MASK                         0x01a8
+#define ZV_LCDPAD_A                            0x01ac
+#define ZV_LCDPAD_EN                           0x01b0
+#define ZV_LCDPAD_Y                            0x01b4
+
+/* PLL Registers */
+#define CLK_PIN_CNTL                               0x0001
+#define PPLL_CNTL                                  0x0002
+#define PPLL_REF_DIV                               0x0003
+#define PPLL_DIV_0                                 0x0004
+#define PPLL_DIV_1                                 0x0005
+#define PPLL_DIV_2                                 0x0006
+#define PPLL_DIV_3                                 0x0007
+#define VCLK_ECP_CNTL                              0x0008
+#define HTOTAL_CNTL                                0x0009
+#define M_SPLL_REF_FB_DIV                          0x000a
+#define AGP_PLL_CNTL                               0x000b
+#define SPLL_CNTL                                  0x000c
+#define SCLK_CNTL                                  0x000d
+#define MPLL_CNTL                                  0x000e
+#define MDLL_CKO                                   0x000f
+#define MDLL_RDCKA                                 0x0010
+#define MCLK_CNTL                                  0x0012
+#define AGP_PLL_CNTL                               0x000b
+#define PLL_TEST_CNTL                              0x0013
+#define CLK_PWRMGT_CNTL                            0x0014
+#define PLL_PWRMGT_CNTL                            0x0015
+#define MCLK_MISC                                  0x001f
+#define P2PLL_CNTL                                 0x002a
+#define P2PLL_REF_DIV                              0x002b
+#define PIXCLKS_CNTL                               0x002d
+#define SCLK_MORE_CNTL				   0x0035
+
+/* MCLK_CNTL bit constants */
+#define FORCEON_MCLKA				   (1 << 16)
+#define FORCEON_MCLKB         		   	   (1 << 17)
+#define FORCEON_YCLKA         	    	   	   (1 << 18)
+#define FORCEON_YCLKB         		   	   (1 << 19)
+#define FORCEON_MC            		   	   (1 << 20)
+#define FORCEON_AIC           		   	   (1 << 21)
+
+/* SCLK_CNTL bit constants */
+#define DYN_STOP_LAT_MASK			   0x00007ff8
+#define CP_MAX_DYN_STOP_LAT			   0x0008
+#define SCLK_FORCEON_MASK			   0xffff8000
+
+/* SCLK_MORE_CNTL bit constants */
+#define SCLK_MORE_FORCEON			   0x0700
+
+/* BUS_CNTL bit constants */
+#define BUS_DBL_RESYNC                             0x00000001
+#define BUS_MSTR_RESET                             0x00000002
+#define BUS_FLUSH_BUF                              0x00000004
+#define BUS_STOP_REQ_DIS                           0x00000008
+#define BUS_ROTATION_DIS                           0x00000010
+#define BUS_MASTER_DIS                             0x00000040
+#define BUS_ROM_WRT_EN                             0x00000080
+#define BUS_DIS_ROM                                0x00001000
+#define BUS_PCI_READ_RETRY_EN                      0x00002000
+#define BUS_AGP_AD_STEPPING_EN                     0x00004000
+#define BUS_PCI_WRT_RETRY_EN                       0x00008000
+#define BUS_MSTR_RD_MULT                           0x00100000
+#define BUS_MSTR_RD_LINE                           0x00200000
+#define BUS_SUSPEND                                0x00400000
+#define LAT_16X                                    0x00800000
+#define BUS_RD_DISCARD_EN                          0x01000000
+#define BUS_RD_ABORT_EN                            0x02000000
+#define BUS_MSTR_WS                                0x04000000
+#define BUS_PARKING_DIS                            0x08000000
+#define BUS_MSTR_DISCONNECT_EN                     0x10000000
+#define BUS_WRT_BURST                              0x20000000
+#define BUS_READ_BURST                             0x40000000
+#define BUS_RDY_READ_DLY                           0x80000000
+
+/* PIXCLKS_CNTL */
+#define PIX2CLK_SRC_SEL_MASK                       0x03
+#define PIX2CLK_SRC_SEL_CPUCLK                     0x00
+#define PIX2CLK_SRC_SEL_PSCANCLK                   0x01
+#define PIX2CLK_SRC_SEL_BYTECLK                    0x02
+#define PIX2CLK_SRC_SEL_P2PLLCLK                   0x03
+#define PIX2CLK_ALWAYS_ONb                         (1<<6)
+#define PIX2CLK_DAC_ALWAYS_ONb                     (1<<7)
+#define PIXCLK_TV_SRC_SEL                          (1 << 8)
+#define PIXCLK_LVDS_ALWAYS_ONb                     (1 << 14)
+#define PIXCLK_TMDS_ALWAYS_ONb                     (1 << 15)
+
+
+/* CLOCK_CNTL_INDEX bit constants */
+#define PLL_WR_EN                                  0x00000080
+
+/* CONFIG_CNTL bit constants */
+#define CFG_VGA_RAM_EN                             0x00000100
+#define CFG_ATI_REV_ID_MASK			   (0xf << 16)
+#define CFG_ATI_REV_A11				   (0 << 16)
+#define CFG_ATI_REV_A12				   (1 << 16)
+#define CFG_ATI_REV_A13				   (2 << 16)
+
+/* CRTC_EXT_CNTL bit constants */
+#define VGA_ATI_LINEAR                             0x00000008
+#define VGA_128KAP_PAGING                          0x00000010
+#define	XCRT_CNT_EN				   (1 << 6)
+#define CRTC_HSYNC_DIS				   (1 << 8)
+#define CRTC_VSYNC_DIS				   (1 << 9)
+#define CRTC_DISPLAY_DIS			   (1 << 10)
+#define CRTC_CRT_ON				   (1 << 15)
+
+
+/* DSTCACHE_CTLSTAT bit constants */
+#define RB2D_DC_FLUSH				   (3 << 0)
+#define RB2D_DC_FLUSH_ALL			   0xf
+#define RB2D_DC_BUSY				   (1 << 31)
+
+
+/* CRTC_GEN_CNTL bit constants */
+#define CRTC_DBL_SCAN_EN                           0x00000001
+#define CRTC_CUR_EN                                0x00010000
+#define CRTC_INTERLACE_EN			   (1 << 1)
+#define CRTC_BYPASS_LUT_EN     			   (1 << 14)
+#define CRTC_EXT_DISP_EN      			   (1 << 24)
+#define CRTC_EN					   (1 << 25)
+#define CRTC_DISP_REQ_EN_B                         (1 << 26)
+
+/* CRTC_STATUS bit constants */
+#define CRTC_VBLANK                                0x00000001
+
+/* CRTC2_GEN_CNTL bit constants */
+#define CRT2_ON                                    (1 << 7)
+#define CRTC2_DISPLAY_DIS                          (1 << 23)
+#define CRTC2_EN                                   (1 << 25)
+#define CRTC2_DISP_REQ_EN_B                        (1 << 26)
+
+/* CUR_OFFSET, CUR_HORZ_VERT_POSN, CUR_HORZ_VERT_OFF bit constants */
+#define CUR_LOCK                                   0x80000000
+
+/* GPIO bit constants */
+#define GPIO_A_0		(1 <<  0)
+#define GPIO_A_1		(1 <<  1)
+#define GPIO_Y_0		(1 <<  8)
+#define GPIO_Y_1		(1 <<  9)
+#define GPIO_EN_0		(1 << 16)
+#define GPIO_EN_1		(1 << 17)
+#define GPIO_MASK_0		(1 << 24)
+#define GPIO_MASK_1		(1 << 25)
+#define VGA_DDC_DATA_OUTPUT	GPIO_A_0
+#define VGA_DDC_CLK_OUTPUT	GPIO_A_1
+#define VGA_DDC_DATA_INPUT	GPIO_Y_0
+#define VGA_DDC_CLK_INPUT	GPIO_Y_1
+#define VGA_DDC_DATA_OUT_EN	GPIO_EN_0
+#define VGA_DDC_CLK_OUT_EN	GPIO_EN_1
+
+
+/* FP bit constants */
+#define FP_CRTC_H_TOTAL_MASK			   0x000003ff
+#define FP_CRTC_H_DISP_MASK			   0x01ff0000
+#define FP_CRTC_V_TOTAL_MASK			   0x00000fff
+#define FP_CRTC_V_DISP_MASK			   0x0fff0000
+#define FP_H_SYNC_STRT_CHAR_MASK		   0x00001ff8
+#define FP_H_SYNC_WID_MASK			   0x003f0000
+#define FP_V_SYNC_STRT_MASK			   0x00000fff
+#define FP_V_SYNC_WID_MASK			   0x001f0000
+#define FP_CRTC_H_TOTAL_SHIFT			   0x00000000
+#define FP_CRTC_H_DISP_SHIFT			   0x00000010
+#define FP_CRTC_V_TOTAL_SHIFT			   0x00000000
+#define FP_CRTC_V_DISP_SHIFT			   0x00000010
+#define FP_H_SYNC_STRT_CHAR_SHIFT		   0x00000003
+#define FP_H_SYNC_WID_SHIFT			   0x00000010
+#define FP_V_SYNC_STRT_SHIFT			   0x00000000
+#define FP_V_SYNC_WID_SHIFT			   0x00000010
+
+/* FP_GEN_CNTL bit constants */
+#define FP_FPON					   (1 << 0)
+#define FP_TMDS_EN				   (1 << 2)
+#define FP_PANEL_FORMAT                            (1 << 3)
+#define FP_EN_TMDS				   (1 << 7)
+#define FP_DETECT_SENSE				   (1 << 8)
+#define R200_FP_SOURCE_SEL_MASK                    (3 << 10)
+#define R200_FP_SOURCE_SEL_CRTC1                   (0 << 10)
+#define R200_FP_SOURCE_SEL_CRTC2                   (1 << 10)
+#define R200_FP_SOURCE_SEL_RMX                     (2 << 10)
+#define R200_FP_SOURCE_SEL_TRANS                   (3 << 10)
+#define FP_SEL_CRTC1				   (0 << 13)
+#define FP_SEL_CRTC2				   (1 << 13)
+#define FP_USE_VGA_HSYNC                           (1 << 14)
+#define FP_CRTC_DONT_SHADOW_HPAR		   (1 << 15)
+#define FP_CRTC_DONT_SHADOW_VPAR		   (1 << 16)
+#define FP_CRTC_DONT_SHADOW_HEND		   (1 << 17)
+#define FP_CRTC_USE_SHADOW_VEND			   (1 << 18)
+#define FP_RMX_HVSYNC_CONTROL_EN		   (1 << 20)
+#define FP_DFP_SYNC_SEL				   (1 << 21)
+#define FP_CRTC_LOCK_8DOT			   (1 << 22)
+#define FP_CRT_SYNC_SEL				   (1 << 23)
+#define FP_USE_SHADOW_EN			   (1 << 24)
+#define FP_CRT_SYNC_ALT				   (1 << 26)
+
+/* FP2_GEN_CNTL bit constants */
+#define FP2_BLANK_EN             (1 <<  1)
+#define FP2_ON                   (1 <<  2)
+#define FP2_PANEL_FORMAT         (1 <<  3)
+#define FP2_SOURCE_SEL_MASK      (3 << 10)
+#define FP2_SOURCE_SEL_CRTC2     (1 << 10)
+#define FP2_SRC_SEL_MASK         (3 << 13)
+#define FP2_SRC_SEL_CRTC2        (1 << 13)
+#define FP2_FP_POL               (1 << 16)
+#define FP2_LP_POL               (1 << 17)
+#define FP2_SCK_POL              (1 << 18)
+#define FP2_LCD_CNTL_MASK        (7 << 19)
+#define FP2_PAD_FLOP_EN          (1 << 22)
+#define FP2_CRC_EN               (1 << 23)
+#define FP2_CRC_READ_EN          (1 << 24)
+#define FP2_DV0_EN               (1 << 25)
+#define FP2_DV0_RATE_SEL_SDR     (1 << 26)
+
+
+/* LVDS_GEN_CNTL bit constants */
+#define LVDS_ON					   (1 << 0)
+#define LVDS_DISPLAY_DIS			   (1 << 1)
+#define LVDS_PANEL_TYPE				   (1 << 2)
+#define LVDS_PANEL_FORMAT			   (1 << 3)
+#define LVDS_EN					   (1 << 7)
+#define LVDS_BL_MOD_LEVEL_MASK			   0x0000ff00
+#define LVDS_BL_MOD_LEVEL_SHIFT			   8
+#define LVDS_BL_MOD_EN				   (1 << 16)
+#define LVDS_DIGON				   (1 << 18)
+#define LVDS_BLON				   (1 << 19)
+#define LVDS_SEL_CRTC2				   (1 << 23)
+#define LVDS_STATE_MASK	\
+	(LVDS_ON | LVDS_DISPLAY_DIS | LVDS_BL_MOD_LEVEL_MASK | LVDS_BLON)
+
+/* LVDS_PLL_CNTL bit constatns */
+#define HSYNC_DELAY_SHIFT			   0x1c
+#define HSYNC_DELAY_MASK			   (0xf << 0x1c)
+
+/* TMDS_TRANSMITTER_CNTL bit constants */
+#define TMDS_PLL_EN				   (1 << 0)
+#define TMDS_PLLRST				   (1 << 1)
+#define TMDS_RAN_PAT_RST			   (1 << 7)
+#define TMDS_ICHCSEL				   (1 << 28)
+
+/* FP_HORZ_STRETCH bit constants */
+#define HORZ_STRETCH_RATIO_MASK			   0xffff
+#define HORZ_STRETCH_RATIO_MAX			   4096
+#define HORZ_PANEL_SIZE				   (0x1ff << 16)
+#define HORZ_PANEL_SHIFT			   16
+#define HORZ_STRETCH_PIXREP			   (0 << 25)
+#define HORZ_STRETCH_BLEND			   (1 << 26)
+#define HORZ_STRETCH_ENABLE			   (1 << 25)
+#define HORZ_AUTO_RATIO				   (1 << 27)
+#define HORZ_FP_LOOP_STRETCH			   (0x7 << 28)
+#define HORZ_AUTO_RATIO_INC			   (1 << 31)
+
+
+/* FP_VERT_STRETCH bit constants */
+#define VERT_STRETCH_RATIO_MASK			   0xfff
+#define VERT_STRETCH_RATIO_MAX			   4096
+#define VERT_PANEL_SIZE				   (0xfff << 12)
+#define VERT_PANEL_SHIFT			   12
+#define VERT_STRETCH_LINREP			   (0 << 26)
+#define VERT_STRETCH_BLEND			   (1 << 26)
+#define VERT_STRETCH_ENABLE			   (1 << 25)
+#define VERT_AUTO_RATIO_EN			   (1 << 27)
+#define VERT_FP_LOOP_STRETCH			   (0x7 << 28)
+#define VERT_STRETCH_RESERVED			   0xf1000000
+
+/* DAC_CNTL bit constants */   
+#define DAC_8BIT_EN                                0x00000100
+#define DAC_4BPP_PIX_ORDER                         0x00000200
+#define DAC_CRC_EN                                 0x00080000
+#define DAC_MASK_ALL				   (0xff << 24)
+#define DAC_PDWN                                   (1 << 15)
+#define DAC_EXPAND_MODE				   (1 << 14)
+#define DAC_VGA_ADR_EN				   (1 << 13)
+#define DAC_RANGE_CNTL				   (3 <<  0)
+#define DAC_RANGE_CNTL_MASK    			   0x03
+#define DAC_BLANKING				   (1 <<  2)
+#define DAC_CMP_EN                                 (1 <<  3)
+#define DAC_CMP_OUTPUT                             (1 <<  7)
+
+/* DAC_CNTL2 bit constants */   
+#define DAC2_EXPAND_MODE			   (1 << 14)
+#define DAC2_CMP_EN                                (1 << 7)
+#define DAC2_PALETTE_ACCESS_CNTL                   (1 << 5)
+
+/* DAC_EXT_CNTL bit constants */
+#define DAC_FORCE_BLANK_OFF_EN                     (1 << 4)
+#define DAC_FORCE_DATA_EN                          (1 << 5)
+#define DAC_FORCE_DATA_SEL_MASK                    (3 << 6)
+#define DAC_FORCE_DATA_MASK                        0x0003ff00
+#define DAC_FORCE_DATA_SHIFT                       8
+
+/* GEN_RESET_CNTL bit constants */
+#define SOFT_RESET_GUI                             0x00000001
+#define SOFT_RESET_VCLK                            0x00000100
+#define SOFT_RESET_PCLK                            0x00000200
+#define SOFT_RESET_ECP                             0x00000400
+#define SOFT_RESET_DISPENG_XCLK                    0x00000800
+
+/* MEM_CNTL bit constants */
+#define MEM_CTLR_STATUS_IDLE                       0x00000000
+#define MEM_CTLR_STATUS_BUSY                       0x00100000
+#define MEM_SEQNCR_STATUS_IDLE                     0x00000000
+#define MEM_SEQNCR_STATUS_BUSY                     0x00200000
+#define MEM_ARBITER_STATUS_IDLE                    0x00000000
+#define MEM_ARBITER_STATUS_BUSY                    0x00400000
+#define MEM_REQ_UNLOCK                             0x00000000
+#define MEM_REQ_LOCK                               0x00800000
+#define MEM_NUM_CHANNELS_MASK 			   0x00000001
+#define MEM_USE_B_CH_ONLY                          0x00000002
+#define RV100_MEM_HALF_MODE                        0x00000008
+#define R300_MEM_NUM_CHANNELS_MASK                 0x00000003
+#define R300_MEM_USE_CD_CH_ONLY                    0x00000004
+
+
+/* RBBM_SOFT_RESET bit constants */
+#define SOFT_RESET_CP           		   (1 <<  0)
+#define SOFT_RESET_HI           		   (1 <<  1)
+#define SOFT_RESET_SE           		   (1 <<  2)
+#define SOFT_RESET_RE           		   (1 <<  3)
+#define SOFT_RESET_PP           		   (1 <<  4)
+#define SOFT_RESET_E2           		   (1 <<  5)
+#define SOFT_RESET_RB           		   (1 <<  6)
+#define SOFT_RESET_HDP          		   (1 <<  7)
+
+/* SURFACE_CNTL bit consants */
+#define SURF_TRANSLATION_DIS			   (1 << 8)
+#define NONSURF_AP0_SWP_16BPP			   (1 << 20)
+#define NONSURF_AP0_SWP_32BPP			   (1 << 21)
+#define NONSURF_AP1_SWP_16BPP			   (1 << 22)
+#define NONSURF_AP1_SWP_32BPP			   (1 << 23)
+
+/* DEFAULT_SC_BOTTOM_RIGHT bit constants */
+#define DEFAULT_SC_RIGHT_MAX			   (0x1fff << 0)
+#define DEFAULT_SC_BOTTOM_MAX			   (0x1fff << 16)
+
+/* MM_INDEX bit constants */
+#define MM_APER                                    0x80000000
+
+/* CLR_CMP_CNTL bit constants */
+#define COMPARE_SRC_FALSE                          0x00000000
+#define COMPARE_SRC_TRUE                           0x00000001
+#define COMPARE_SRC_NOT_EQUAL                      0x00000004
+#define COMPARE_SRC_EQUAL                          0x00000005
+#define COMPARE_SRC_EQUAL_FLIP                     0x00000007
+#define COMPARE_DST_FALSE                          0x00000000
+#define COMPARE_DST_TRUE                           0x00000100
+#define COMPARE_DST_NOT_EQUAL                      0x00000400
+#define COMPARE_DST_EQUAL                          0x00000500
+#define COMPARE_DESTINATION                        0x00000000
+#define COMPARE_SOURCE                             0x01000000
+#define COMPARE_SRC_AND_DST                        0x02000000
+
+
+/* DP_CNTL bit constants */
+#define DST_X_RIGHT_TO_LEFT                        0x00000000
+#define DST_X_LEFT_TO_RIGHT                        0x00000001
+#define DST_Y_BOTTOM_TO_TOP                        0x00000000
+#define DST_Y_TOP_TO_BOTTOM                        0x00000002
+#define DST_X_MAJOR                                0x00000000
+#define DST_Y_MAJOR                                0x00000004
+#define DST_X_TILE                                 0x00000008
+#define DST_Y_TILE                                 0x00000010
+#define DST_LAST_PEL                               0x00000020
+#define DST_TRAIL_X_RIGHT_TO_LEFT                  0x00000000
+#define DST_TRAIL_X_LEFT_TO_RIGHT                  0x00000040
+#define DST_TRAP_FILL_RIGHT_TO_LEFT                0x00000000
+#define DST_TRAP_FILL_LEFT_TO_RIGHT                0x00000080
+#define DST_BRES_SIGN                              0x00000100
+#define DST_HOST_BIG_ENDIAN_EN                     0x00000200
+#define DST_POLYLINE_NONLAST                       0x00008000
+#define DST_RASTER_STALL                           0x00010000
+#define DST_POLY_EDGE                              0x00040000
+
+
+/* DP_CNTL_YDIR_XDIR_YMAJOR bit constants (short version of DP_CNTL) */
+#define DST_X_MAJOR_S                              0x00000000
+#define DST_Y_MAJOR_S                              0x00000001
+#define DST_Y_BOTTOM_TO_TOP_S                      0x00000000
+#define DST_Y_TOP_TO_BOTTOM_S                      0x00008000
+#define DST_X_RIGHT_TO_LEFT_S                      0x00000000
+#define DST_X_LEFT_TO_RIGHT_S                      0x80000000
+
+
+/* DP_DATATYPE bit constants */
+#define DST_8BPP                                   0x00000002
+#define DST_15BPP                                  0x00000003
+#define DST_16BPP                                  0x00000004
+#define DST_24BPP                                  0x00000005
+#define DST_32BPP                                  0x00000006
+#define DST_8BPP_RGB332                            0x00000007
+#define DST_8BPP_Y8                                0x00000008
+#define DST_8BPP_RGB8                              0x00000009
+#define DST_16BPP_VYUY422                          0x0000000b
+#define DST_16BPP_YVYU422                          0x0000000c
+#define DST_32BPP_AYUV444                          0x0000000e
+#define DST_16BPP_ARGB4444                         0x0000000f
+#define BRUSH_SOLIDCOLOR                           0x00000d00
+#define SRC_MONO                                   0x00000000
+#define SRC_MONO_LBKGD                             0x00010000
+#define SRC_DSTCOLOR                               0x00030000
+#define BYTE_ORDER_MSB_TO_LSB                      0x00000000
+#define BYTE_ORDER_LSB_TO_MSB                      0x40000000
+#define DP_CONVERSION_TEMP                         0x80000000
+#define HOST_BIG_ENDIAN_EN			   (1 << 29)
+
+
+/* DP_GUI_MASTER_CNTL bit constants */
+#define GMC_SRC_PITCH_OFFSET_DEFAULT               0x00000000
+#define GMC_SRC_PITCH_OFFSET_LEAVE                 0x00000001
+#define GMC_DST_PITCH_OFFSET_DEFAULT               0x00000000
+#define GMC_DST_PITCH_OFFSET_LEAVE                 0x00000002
+#define GMC_SRC_CLIP_DEFAULT                       0x00000000
+#define GMC_SRC_CLIP_LEAVE                         0x00000004
+#define GMC_DST_CLIP_DEFAULT                       0x00000000
+#define GMC_DST_CLIP_LEAVE                         0x00000008
+#define GMC_BRUSH_8x8MONO                          0x00000000
+#define GMC_BRUSH_8x8MONO_LBKGD                    0x00000010
+#define GMC_BRUSH_8x1MONO                          0x00000020
+#define GMC_BRUSH_8x1MONO_LBKGD                    0x00000030
+#define GMC_BRUSH_1x8MONO                          0x00000040
+#define GMC_BRUSH_1x8MONO_LBKGD                    0x00000050
+#define GMC_BRUSH_32x1MONO                         0x00000060
+#define GMC_BRUSH_32x1MONO_LBKGD                   0x00000070
+#define GMC_BRUSH_32x32MONO                        0x00000080
+#define GMC_BRUSH_32x32MONO_LBKGD                  0x00000090
+#define GMC_BRUSH_8x8COLOR                         0x000000a0
+#define GMC_BRUSH_8x1COLOR                         0x000000b0
+#define GMC_BRUSH_1x8COLOR                         0x000000c0
+#define GMC_BRUSH_SOLID_COLOR                       0x000000d0
+#define GMC_DST_8BPP                               0x00000200
+#define GMC_DST_15BPP                              0x00000300
+#define GMC_DST_16BPP                              0x00000400
+#define GMC_DST_24BPP                              0x00000500
+#define GMC_DST_32BPP                              0x00000600
+#define GMC_DST_8BPP_RGB332                        0x00000700
+#define GMC_DST_8BPP_Y8                            0x00000800
+#define GMC_DST_8BPP_RGB8                          0x00000900
+#define GMC_DST_16BPP_VYUY422                      0x00000b00
+#define GMC_DST_16BPP_YVYU422                      0x00000c00
+#define GMC_DST_32BPP_AYUV444                      0x00000e00
+#define GMC_DST_16BPP_ARGB4444                     0x00000f00
+#define GMC_SRC_MONO                               0x00000000
+#define GMC_SRC_MONO_LBKGD                         0x00001000
+#define GMC_SRC_DSTCOLOR                           0x00003000
+#define GMC_BYTE_ORDER_MSB_TO_LSB                  0x00000000
+#define GMC_BYTE_ORDER_LSB_TO_MSB                  0x00004000
+#define GMC_DP_CONVERSION_TEMP_9300                0x00008000
+#define GMC_DP_CONVERSION_TEMP_6500                0x00000000
+#define GMC_DP_SRC_RECT                            0x02000000
+#define GMC_DP_SRC_HOST                            0x03000000
+#define GMC_DP_SRC_HOST_BYTEALIGN                  0x04000000
+#define GMC_3D_FCN_EN_CLR                          0x00000000
+#define GMC_3D_FCN_EN_SET                          0x08000000
+#define GMC_DST_CLR_CMP_FCN_LEAVE                  0x00000000
+#define GMC_DST_CLR_CMP_FCN_CLEAR                  0x10000000
+#define GMC_AUX_CLIP_LEAVE                         0x00000000
+#define GMC_AUX_CLIP_CLEAR                         0x20000000
+#define GMC_WRITE_MASK_LEAVE                       0x00000000
+#define GMC_WRITE_MASK_SET                         0x40000000
+#define GMC_CLR_CMP_CNTL_DIS      		   (1 << 28)
+#define GMC_SRC_DATATYPE_COLOR			   (3 << 12)
+#define ROP3_S                			   0x00cc0000
+#define ROP3_SRCCOPY				   0x00cc0000
+#define ROP3_P                			   0x00f00000
+#define ROP3_PATCOPY				   0x00f00000
+#define DP_SRC_SOURCE_MASK        		   (7    << 24)
+#define GMC_BRUSH_NONE            		   (15   <<  4)
+#define DP_SRC_SOURCE_MEMORY			   (2    << 24)
+#define GMC_BRUSH_SOLIDCOLOR			   0x000000d0
+
+/* DP_MIX bit constants */
+#define DP_SRC_RECT                                0x00000200
+#define DP_SRC_HOST                                0x00000300
+#define DP_SRC_HOST_BYTEALIGN                      0x00000400
+
+/* MPLL_CNTL bit constants */
+#define MPLL_RESET                                 0x00000001
+
+/* MDLL_CKO bit constants */
+#define MCKOA_SLEEP                                0x00000001
+#define MCKOA_RESET                                0x00000002
+#define MCKOA_REF_SKEW_MASK                        0x00000700
+#define MCKOA_FB_SKEW_MASK                         0x00007000
+
+/* MDLL_RDCKA bit constants */
+#define MRDCKA0_SLEEP                              0x00000001
+#define MRDCKA0_RESET                              0x00000002
+#define MRDCKA1_SLEEP                              0x00010000
+#define MRDCKA1_RESET                              0x00020000
+
+/* VCLK_ECP_CNTL constants */
+#define VCLK_SRC_SEL_MASK                          0x03
+#define VCLK_SRC_SEL_CPUCLK                        0x00
+#define VCLK_SRC_SEL_PSCANCLK                      0x01
+#define VCLK_SRC_SEL_BYTECLK	                   0x02
+#define VCLK_SRC_SEL_PPLLCLK			   0x03
+#define PIXCLK_ALWAYS_ONb                          0x00000040
+#define PIXCLK_DAC_ALWAYS_ONb                      0x00000080
+
+/* BUS_CNTL1 constants */
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK         0x0c000000
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT        26
+#define BUS_CNTL1_AGPCLK_VALID                     0x80000000
+
+/* PLL_PWRMGT_CNTL constants */
+#define PLL_PWRMGT_CNTL_SPLL_TURNOFF               0x00000002
+#define PLL_PWRMGT_CNTL_PPLL_TURNOFF               0x00000004
+#define PLL_PWRMGT_CNTL_P2PLL_TURNOFF              0x00000008
+#define PLL_PWRMGT_CNTL_TVPLL_TURNOFF              0x00000010
+#define PLL_PWRMGT_CNTL_MOBILE_SU                  0x00010000
+#define PLL_PWRMGT_CNTL_SU_SCLK_USE_BCLK           0x00020000
+#define PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK           0x00040000
+
+/* TV_DAC_CNTL constants */
+#define TV_DAC_CNTL_BGSLEEP                        0x00000040
+#define TV_DAC_CNTL_DETECT                         0x00000010
+#define TV_DAC_CNTL_BGADJ_MASK                     0x000f0000
+#define TV_DAC_CNTL_DACADJ_MASK                    0x00f00000
+#define TV_DAC_CNTL_BGADJ__SHIFT                   16
+#define TV_DAC_CNTL_DACADJ__SHIFT                  20
+#define TV_DAC_CNTL_RDACPD                         0x01000000
+#define TV_DAC_CNTL_GDACPD                         0x02000000
+#define TV_DAC_CNTL_BDACPD                         0x04000000
+
+/* DISP_MISC_CNTL constants */
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_PP          (1 << 0)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_PP        (1 << 1)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_PP           (1 << 2)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_SCLK        (1 << 4)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_SCLK      (1 << 5)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_SCLK         (1 << 6)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_PP         (1 << 12)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_SCLK       (1 << 15)
+#define DISP_MISC_CNTL_SOFT_RESET_LVDS             (1 << 16)
+#define DISP_MISC_CNTL_SOFT_RESET_TMDS             (1 << 17)
+#define DISP_MISC_CNTL_SOFT_RESET_DIG_TMDS         (1 << 18)
+#define DISP_MISC_CNTL_SOFT_RESET_TV               (1 << 19)
+
+/* DISP_PWR_MAN constants */
+#define DISP_PWR_MAN_DISP_PWR_MAN_D3_CRTC_EN       (1 << 0)
+#define DISP_PWR_MAN_DISP2_PWR_MAN_D3_CRTC2_EN     (1 << 4)
+#define DISP_PWR_MAN_DISP_D3_RST                   (1 << 16)
+#define DISP_PWR_MAN_DISP_D3_REG_RST               (1 << 17)
+#define DISP_PWR_MAN_DISP_D3_GRPH_RST              (1 << 18)
+#define DISP_PWR_MAN_DISP_D3_SUBPIC_RST            (1 << 19)
+#define DISP_PWR_MAN_DISP_D3_OV0_RST               (1 << 20)
+#define DISP_PWR_MAN_DISP_D1D2_GRPH_RST            (1 << 21)
+#define DISP_PWR_MAN_DISP_D1D2_SUBPIC_RST          (1 << 22)
+#define DISP_PWR_MAN_DISP_D1D2_OV0_RST             (1 << 23)
+#define DISP_PWR_MAN_DIG_TMDS_ENABLE_RST           (1 << 24)
+#define DISP_PWR_MAN_TV_ENABLE_RST                 (1 << 25)
+#define DISP_PWR_MAN_AUTO_PWRUP_EN                 (1 << 26)
+
+/* masks */
+
+#define CONFIG_MEMSIZE_MASK		0x1f000000
+#define MEM_CFG_TYPE			0x40000000
+#define DST_OFFSET_MASK			0x003fffff
+#define DST_PITCH_MASK			0x3fc00000
+#define DEFAULT_TILE_MASK		0xc0000000
+#define	PPLL_DIV_SEL_MASK		0x00000300
+#define	PPLL_RESET			0x00000001
+#define	PPLL_SLEEP			0x00000002
+#define PPLL_ATOMIC_UPDATE_EN		0x00010000
+#define PPLL_REF_DIV_MASK		0x000003ff
+#define	PPLL_FB3_DIV_MASK		0x000007ff
+#define	PPLL_POST3_DIV_MASK		0x00070000
+#define PPLL_ATOMIC_UPDATE_R		0x00008000
+#define PPLL_ATOMIC_UPDATE_W		0x00008000
+#define	PPLL_VGA_ATOMIC_UPDATE_EN	0x00020000
+#define R300_PPLL_REF_DIV_ACC_MASK	(0x3ff << 18)
+#define R300_PPLL_REF_DIV_ACC_SHIFT	18
+
+#define GUI_ACTIVE			0x80000000
+
+
+#define MC_IND_INDEX                           0x01F8
+#define MC_IND_DATA                            0x01FC
+
+/* PAD_CTLR_STRENGTH */
+#define PAD_MANUAL_OVERRIDE		0x80000000
+
+// pllCLK_PIN_CNTL
+#define CLK_PIN_CNTL__OSC_EN_MASK                          0x00000001L
+#define CLK_PIN_CNTL__OSC_EN                               0x00000001L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN_MASK                    0x00000004L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN                         0x00000004L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN_MASK                 0x00000010L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN                      0x00000010L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE_MASK               0x00000020L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE                    0x00000020L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN_MASK                0x00000800L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN                     0x00000800L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN_MASK           0x00001000L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN                0x00001000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND_MASK          0x00002000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND               0x00002000L
+#define CLK_PIN_CNTL__CG_SPARE_MASK                        0x00004000L
+#define CLK_PIN_CNTL__CG_SPARE                             0x00004000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL_MASK             0x00008000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL                  0x00008000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING_MASK                  0x00010000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING                       0x00010000L
+#define CLK_PIN_CNTL__CG_SPARE_RD_MASK                     0x00060000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb_MASK               0x00080000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb                    0x00080000L
+#define CLK_PIN_CNTL__PWRSEQ_DELAY_MASK                    0xff000000L
+
+// pllCLK_PWRMGT_CNTL
+#define	CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF__SHIFT         0x00000000
+#define	CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF__SHIFT         0x00000001
+#define	CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF__SHIFT         0x00000002
+#define	CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF__SHIFT        0x00000003
+#define	CLK_PWRMGT_CNTL__MCLK_TURNOFF__SHIFT            0x00000004
+#define	CLK_PWRMGT_CNTL__SCLK_TURNOFF__SHIFT            0x00000005
+#define	CLK_PWRMGT_CNTL__PCLK_TURNOFF__SHIFT            0x00000006
+#define	CLK_PWRMGT_CNTL__P2CLK_TURNOFF__SHIFT           0x00000007
+#define	CLK_PWRMGT_CNTL__MC_CH_MODE__SHIFT              0x00000008
+#define	CLK_PWRMGT_CNTL__TEST_MODE__SHIFT               0x00000009
+#define	CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN__SHIFT          0x0000000a
+#define	CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE__SHIFT      0x0000000c
+#define	CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT__SHIFT         0x0000000d
+#define	CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT__SHIFT       0x0000000f
+#define	CLK_PWRMGT_CNTL__MC_BUSY__SHIFT                 0x00000010
+#define	CLK_PWRMGT_CNTL__MC_INT_CNTL__SHIFT             0x00000011
+#define	CLK_PWRMGT_CNTL__MC_SWITCH__SHIFT               0x00000012
+#define	CLK_PWRMGT_CNTL__DLL_READY__SHIFT               0x00000013
+#define	CLK_PWRMGT_CNTL__DISP_PM__SHIFT                 0x00000014
+#define	CLK_PWRMGT_CNTL__DYN_STOP_MODE__SHIFT           0x00000015
+#define	CLK_PWRMGT_CNTL__CG_NO1_DEBUG__SHIFT            0x00000018
+#define	CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF__SHIFT        0x0000001e
+#define	CLK_PWRMGT_CNTL__TVCLK_TURNOFF__SHIFT           0x0000001f
+
+// pllP2PLL_CNTL
+#define P2PLL_CNTL__P2PLL_RESET_MASK                       0x00000001L
+#define P2PLL_CNTL__P2PLL_RESET                            0x00000001L
+#define P2PLL_CNTL__P2PLL_SLEEP_MASK                       0x00000002L
+#define P2PLL_CNTL__P2PLL_SLEEP                            0x00000002L
+#define P2PLL_CNTL__P2PLL_TST_EN_MASK                      0x00000004L
+#define P2PLL_CNTL__P2PLL_TST_EN                           0x00000004L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL_MASK                  0x00000010L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL                       0x00000010L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL_MASK                   0x00000020L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL                        0x00000020L
+#define P2PLL_CNTL__P2PLL_TCPOFF_MASK                      0x00000040L
+#define P2PLL_CNTL__P2PLL_TCPOFF                           0x00000040L
+#define P2PLL_CNTL__P2PLL_TVCOMAX_MASK                     0x00000080L
+#define P2PLL_CNTL__P2PLL_TVCOMAX                          0x00000080L
+#define P2PLL_CNTL__P2PLL_PCP_MASK                         0x00000700L
+#define P2PLL_CNTL__P2PLL_PVG_MASK                         0x00003800L
+#define P2PLL_CNTL__P2PLL_PDC_MASK                         0x0000c000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN_MASK            0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN                 0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC_MASK          0x00040000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC               0x00040000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET_MASK          0x00080000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET               0x00080000L
+
+// pllPIXCLKS_CNTL
+#define	PIXCLKS_CNTL__PIX2CLK_SRC_SEL__SHIFT               0x00000000
+#define	PIXCLKS_CNTL__PIX2CLK_INVERT__SHIFT                0x00000004
+#define	PIXCLKS_CNTL__PIX2CLK_SRC_INVERT__SHIFT            0x00000005
+#define	PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb__SHIFT            0x00000006
+#define	PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb__SHIFT        0x00000007
+#define	PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL__SHIFT             0x00000008
+#define	PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb__SHIFT       0x0000000b
+#define	PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb__SHIFT          0x0000000c
+#define	PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb__SHIFT    0x0000000d
+#define	PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb__SHIFT        0x0000000e
+#define	PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb__SHIFT        0x0000000f
+
+
+// pllPIXCLKS_CNTL
+#define PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK                 0x00000003L
+#define PIXCLKS_CNTL__PIX2CLK_INVERT                       0x00000010L
+#define PIXCLKS_CNTL__PIX2CLK_SRC_INVERT                   0x00000020L
+#define PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb                   0x00000040L
+#define PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb               0x00000080L
+#define PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL                    0x00000100L
+#define PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb              0x00000800L
+#define PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb                 0x00001000L
+#define PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb           0x00002000L
+#define PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb               0x00004000L
+#define PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb               0x00008000L
+#define PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb      (1 << 9)
+#define PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb               (1 << 10)
+#define PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb           (1 << 13)
+#define PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb         (1 << 16)
+#define PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb           (1 << 17)
+#define PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb              (1 << 18)
+#define PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb          (1 << 19)
+#define PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF  (1 << 23)
+
+
+// pllP2PLL_DIV_0
+#define P2PLL_DIV_0__P2PLL_FB_DIV_MASK                     0x000007ffL
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W_MASK            0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W                 0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R_MASK            0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R                 0x00008000L
+#define P2PLL_DIV_0__P2PLL_POST_DIV_MASK                   0x00070000L
+
+// pllSCLK_CNTL
+#define SCLK_CNTL__SCLK_SRC_SEL_MASK                    0x00000007L
+#define SCLK_CNTL__CP_MAX_DYN_STOP_LAT                  0x00000008L
+#define SCLK_CNTL__HDP_MAX_DYN_STOP_LAT                 0x00000010L
+#define SCLK_CNTL__TV_MAX_DYN_STOP_LAT                  0x00000020L
+#define SCLK_CNTL__E2_MAX_DYN_STOP_LAT                  0x00000040L
+#define SCLK_CNTL__SE_MAX_DYN_STOP_LAT                  0x00000080L
+#define SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT                0x00000100L
+#define SCLK_CNTL__VIP_MAX_DYN_STOP_LAT                 0x00000200L
+#define SCLK_CNTL__RE_MAX_DYN_STOP_LAT                  0x00000400L
+#define SCLK_CNTL__PB_MAX_DYN_STOP_LAT                  0x00000800L
+#define SCLK_CNTL__TAM_MAX_DYN_STOP_LAT                 0x00001000L
+#define SCLK_CNTL__TDM_MAX_DYN_STOP_LAT                 0x00002000L
+#define SCLK_CNTL__RB_MAX_DYN_STOP_LAT                  0x00004000L
+#define SCLK_CNTL__DYN_STOP_LAT_MASK                     0x00007ff8
+#define SCLK_CNTL__FORCE_DISP2                          0x00008000L
+#define SCLK_CNTL__FORCE_CP                             0x00010000L
+#define SCLK_CNTL__FORCE_HDP                            0x00020000L
+#define SCLK_CNTL__FORCE_DISP1                          0x00040000L
+#define SCLK_CNTL__FORCE_TOP                            0x00080000L
+#define SCLK_CNTL__FORCE_E2                             0x00100000L
+#define SCLK_CNTL__FORCE_SE                             0x00200000L
+#define SCLK_CNTL__FORCE_IDCT                           0x00400000L
+#define SCLK_CNTL__FORCE_VIP                            0x00800000L
+#define SCLK_CNTL__FORCE_RE                             0x01000000L
+#define SCLK_CNTL__FORCE_PB                             0x02000000L
+#define SCLK_CNTL__FORCE_TAM                            0x04000000L
+#define SCLK_CNTL__FORCE_TDM                            0x08000000L
+#define SCLK_CNTL__FORCE_RB                             0x10000000L
+#define SCLK_CNTL__FORCE_TV_SCLK                        0x20000000L
+#define SCLK_CNTL__FORCE_SUBPIC                         0x40000000L
+#define SCLK_CNTL__FORCE_OV0                            0x80000000L
+#define SCLK_CNTL__R300_FORCE_VAP                       (1<<21)
+#define SCLK_CNTL__R300_FORCE_SR                        (1<<25)
+#define SCLK_CNTL__R300_FORCE_PX                        (1<<26)
+#define SCLK_CNTL__R300_FORCE_TX                        (1<<27)
+#define SCLK_CNTL__R300_FORCE_US                        (1<<28)
+#define SCLK_CNTL__R300_FORCE_SU                        (1<<30)
+#define SCLK_CNTL__FORCEON_MASK                         0xffff8000L
+
+// pllSCLK_CNTL2
+#define SCLK_CNTL2__R300_TCL_MAX_DYN_STOP_LAT           (1<<10)
+#define SCLK_CNTL2__R300_GA_MAX_DYN_STOP_LAT            (1<<11)
+#define SCLK_CNTL2__R300_CBA_MAX_DYN_STOP_LAT           (1<<12)
+#define SCLK_CNTL2__R300_FORCE_TCL                      (1<<13)
+#define SCLK_CNTL2__R300_FORCE_CBA                      (1<<14)
+#define SCLK_CNTL2__R300_FORCE_GA                       (1<<15)
+
+// SCLK_MORE_CNTL
+#define SCLK_MORE_CNTL__DISPREGS_MAX_DYN_STOP_LAT          0x00000001L
+#define SCLK_MORE_CNTL__MC_GUI_MAX_DYN_STOP_LAT            0x00000002L
+#define SCLK_MORE_CNTL__MC_HOST_MAX_DYN_STOP_LAT           0x00000004L
+#define SCLK_MORE_CNTL__FORCE_DISPREGS                     0x00000100L
+#define SCLK_MORE_CNTL__FORCE_MC_GUI                       0x00000200L
+#define SCLK_MORE_CNTL__FORCE_MC_HOST                      0x00000400L
+#define SCLK_MORE_CNTL__STOP_SCLK_EN                       0x00001000L
+#define SCLK_MORE_CNTL__STOP_SCLK_A                        0x00002000L
+#define SCLK_MORE_CNTL__STOP_SCLK_B                        0x00004000L
+#define SCLK_MORE_CNTL__STOP_SCLK_C                        0x00008000L
+#define SCLK_MORE_CNTL__HALF_SPEED_SCLK                    0x00010000L
+#define SCLK_MORE_CNTL__IO_CG_VOLTAGE_DROP                 0x00020000L
+#define SCLK_MORE_CNTL__TVFB_SOFT_RESET                    0x00040000L
+#define SCLK_MORE_CNTL__VOLTAGE_DROP_SYNC                  0x00080000L
+#define SCLK_MORE_CNTL__IDLE_DELAY_HALF_SCLK               0x00400000L
+#define SCLK_MORE_CNTL__AGP_BUSY_HALF_SCLK                 0x00800000L
+#define SCLK_MORE_CNTL__CG_SPARE_RD_C_MASK                 0xff000000L
+#define SCLK_MORE_CNTL__FORCEON                            0x00000700L
+
+// MCLK_CNTL
+#define MCLK_CNTL__MCLKA_SRC_SEL_MASK                   0x00000007L
+#define MCLK_CNTL__YCLKA_SRC_SEL_MASK                   0x00000070L
+#define MCLK_CNTL__MCLKB_SRC_SEL_MASK                   0x00000700L
+#define MCLK_CNTL__YCLKB_SRC_SEL_MASK                   0x00007000L
+#define MCLK_CNTL__FORCE_MCLKA_MASK                     0x00010000L
+#define MCLK_CNTL__FORCE_MCLKA                          0x00010000L
+#define MCLK_CNTL__FORCE_MCLKB_MASK                     0x00020000L
+#define MCLK_CNTL__FORCE_MCLKB                          0x00020000L
+#define MCLK_CNTL__FORCE_YCLKA_MASK                     0x00040000L
+#define MCLK_CNTL__FORCE_YCLKA                          0x00040000L
+#define MCLK_CNTL__FORCE_YCLKB_MASK                     0x00080000L
+#define MCLK_CNTL__FORCE_YCLKB                          0x00080000L
+#define MCLK_CNTL__FORCE_MC_MASK                        0x00100000L
+#define MCLK_CNTL__FORCE_MC                             0x00100000L
+#define MCLK_CNTL__FORCE_AIC_MASK                       0x00200000L
+#define MCLK_CNTL__FORCE_AIC                            0x00200000L
+#define MCLK_CNTL__MRDCKA0_SOUTSEL_MASK                 0x03000000L
+#define MCLK_CNTL__MRDCKA1_SOUTSEL_MASK                 0x0c000000L
+#define MCLK_CNTL__MRDCKB0_SOUTSEL_MASK                 0x30000000L
+#define MCLK_CNTL__MRDCKB1_SOUTSEL_MASK                 0xc0000000L
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKA                (1 << 21)
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKB                (1 << 21)
+
+// MCLK_MISC
+#define MCLK_MISC__SCLK_SOURCED_FROM_MPLL_SEL_MASK         0x00000003L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL_MASK             0x00000004L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL                  0x00000004L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL_MASK              0x00000008L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL                   0x00000008L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN_MASK         0x00000010L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN              0x00000010L
+#define MCLK_MISC__DLL_READY_LAT_MASK                      0x00000100L
+#define MCLK_MISC__DLL_READY_LAT                           0x00000100L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT_MASK           0x00001000L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT                0x00001000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT_MASK           0x00002000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT                0x00002000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE_MASK                 0x00004000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE                      0x00004000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE_MASK                 0x00008000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE                      0x00008000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN_MASK                  0x00010000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN                       0x00010000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL_MASK                   0x00020000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL                        0x00020000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND_MASK        0x00040000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND             0x00040000L
+#define MCLK_MISC__CGM_SPARE_RD_MASK                       0x00300000L
+#define MCLK_MISC__CGM_SPARE_A_RD_MASK                     0x00c00000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN_MASK                   0x01000000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN                        0x01000000L
+#define MCLK_MISC__CGM_SPARE_A_MASK                        0x0e000000L
+
+// VCLK_ECP_CNTL
+#define VCLK_ECP_CNTL__VCLK_SRC_SEL_MASK                   0x00000003L
+#define VCLK_ECP_CNTL__VCLK_INVERT                         0x00000010L
+#define VCLK_ECP_CNTL__PIXCLK_SRC_INVERT                   0x00000020L
+#define VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb                   0x00000040L
+#define VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb               0x00000080L
+#define VCLK_ECP_CNTL__ECP_DIV_MASK                        0x00000300L
+#define VCLK_ECP_CNTL__ECP_FORCE_ON                        0x00040000L
+#define VCLK_ECP_CNTL__SUBCLK_FORCE_ON                     0x00080000L
+#define VCLK_ECP_CNTL__R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF  (1<<23)
+
+// PLL_PWRMGT_CNTL
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF_MASK                 0x00000001L
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF                      0x00000001L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF_MASK                 0x00000002L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF                      0x00000002L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF_MASK                 0x00000004L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF                      0x00000004L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF_MASK                0x00000008L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF                     0x00000008L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF_MASK                0x00000010L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF                     0x00000010L
+#define PLL_PWRMGT_CNTL__AGPCLK_DYN_STOP_LAT_MASK          0x000001e0L
+#define PLL_PWRMGT_CNTL__APM_POWER_STATE_MASK              0x00000600L
+#define PLL_PWRMGT_CNTL__APM_PWRSTATE_RD_MASK              0x00001800L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL_MASK                  0x00002000L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL                       0x00002000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND_MASK          0x00004000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND               0x00004000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND_MASK          0x00008000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND               0x00008000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU_MASK                    0x00010000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU                         0x00010000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK_MASK             0x00020000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK                  0x00020000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK_MASK             0x00040000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK                  0x00040000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE_MASK           0x00080000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE                0x00080000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE_MASK           0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE                0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_CTIVE_RD_MASK          0x00200000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_ACTIVE_RD               0x00200000L
+#define PLL_PWRMGT_CNTL__CG_NO2_DEBUG_MASK                 0xff000000L
+
+// CLK_PWRMGT_CNTL
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF_MASK           0x00000001L
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF                0x00000001L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF_MASK           0x00000002L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF                0x00000002L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF_MASK           0x00000004L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF                0x00000004L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF_MASK          0x00000008L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF               0x00000008L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF_MASK              0x00000010L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF                   0x00000010L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF_MASK              0x00000020L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF                   0x00000020L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF_MASK              0x00000040L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF                   0x00000040L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF_MASK             0x00000080L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF                  0x00000080L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE_MASK                0x00000100L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE                     0x00000100L
+#define CLK_PWRMGT_CNTL__TEST_MODE_MASK                 0x00000200L
+#define CLK_PWRMGT_CNTL__TEST_MODE                      0x00000200L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN_MASK            0x00000400L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN                 0x00000400L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE_MASK        0x00001000L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE             0x00001000L
+#define CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK           0x00006000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT_MASK         0x00008000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT              0x00008000L
+#define CLK_PWRMGT_CNTL__MC_BUSY_MASK                   0x00010000L
+#define CLK_PWRMGT_CNTL__MC_BUSY                        0x00010000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL_MASK               0x00020000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL                    0x00020000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH_MASK                 0x00040000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH                      0x00040000L
+#define CLK_PWRMGT_CNTL__DLL_READY_MASK                 0x00080000L
+#define CLK_PWRMGT_CNTL__DLL_READY                      0x00080000L
+#define CLK_PWRMGT_CNTL__DISP_PM_MASK                   0x00100000L
+#define CLK_PWRMGT_CNTL__DISP_PM                        0x00100000L
+#define CLK_PWRMGT_CNTL__DYN_STOP_MODE_MASK             0x00e00000L
+#define CLK_PWRMGT_CNTL__CG_NO1_DEBUG_MASK              0x3f000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF_MASK          0x40000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF               0x40000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF_MASK             0x80000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF                  0x80000000L
+
+// BUS_CNTL1
+#define BUS_CNTL1__PMI_IO_DISABLE_MASK                     0x00000001L
+#define BUS_CNTL1__PMI_IO_DISABLE                          0x00000001L
+#define BUS_CNTL1__PMI_MEM_DISABLE_MASK                    0x00000002L
+#define BUS_CNTL1__PMI_MEM_DISABLE                         0x00000002L
+#define BUS_CNTL1__PMI_BM_DISABLE_MASK                     0x00000004L
+#define BUS_CNTL1__PMI_BM_DISABLE                          0x00000004L
+#define BUS_CNTL1__PMI_INT_DISABLE_MASK                    0x00000008L
+#define BUS_CNTL1__PMI_INT_DISABLE                         0x00000008L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE_MASK         0x00000020L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE              0x00000020L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS_MASK         0x00000100L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS              0x00000100L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS_MASK         0x00000200L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS              0x00000200L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS_MASK         0x00000400L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS              0x00000400L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS_MASK   0x00000800L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS        0x00000800L
+#define BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK                0x0c000000L
+#define BUS_CNTL1__SEND_SBA_LATENCY_MASK                   0x70000000L
+#define BUS_CNTL1__AGPCLK_VALID_MASK                       0x80000000L
+#define BUS_CNTL1__AGPCLK_VALID                            0x80000000L
+
+// BUS_CNTL1
+#define	BUS_CNTL1__PMI_IO_DISABLE__SHIFT                   0x00000000
+#define	BUS_CNTL1__PMI_MEM_DISABLE__SHIFT                  0x00000001
+#define	BUS_CNTL1__PMI_BM_DISABLE__SHIFT                   0x00000002
+#define	BUS_CNTL1__PMI_INT_DISABLE__SHIFT                  0x00000003
+#define	BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE__SHIFT       0x00000005
+#define	BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS__SHIFT       0x00000008
+#define	BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS__SHIFT       0x00000009
+#define	BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS__SHIFT       0x0000000a
+#define	BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS__SHIFT 0x0000000b
+#define	BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT              0x0000001a
+#define	BUS_CNTL1__SEND_SBA_LATENCY__SHIFT                 0x0000001c
+#define	BUS_CNTL1__AGPCLK_VALID__SHIFT                     0x0000001f
+
+// CRTC_OFFSET_CNTL
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_MASK              0x0000000fL
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_RIGHT_MASK        0x000000f0L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT_MASK          0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT               0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_MASK                0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN                     0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL_MASK       0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL            0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN_MASK       0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN            0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_EN_MASK         0x000c0000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN_MASK     0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN          0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_MASK            0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC                 0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN_MASK 0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN     0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN_MASK 0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN    0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_MASK        0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET             0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK_MASK            0x80000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK                 0x80000000L
+
+// CRTC_GEN_CNTL
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN_MASK               0x00000001L
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN                    0x00000001L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN_MASK              0x00000002L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN                   0x00000002L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN_MASK                 0x00000010L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN                      0x00000010L
+#define CRTC_GEN_CNTL__CRTC_PIX_WIDTH_MASK                 0x00000f00L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN_MASK                   0x00008000L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN                        0x00008000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN_MASK                    0x00010000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN                         0x00010000L
+#define CRTC_GEN_CNTL__CRTC_VSTAT_MODE_MASK                0x00060000L
+#define CRTC_GEN_CNTL__CRTC_CUR_MODE_MASK                  0x00700000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN_MASK               0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN                    0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EN_MASK                        0x02000000L
+#define CRTC_GEN_CNTL__CRTC_EN                             0x02000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B_MASK             0x04000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B                  0x04000000L
+
+// CRTC2_GEN_CNTL
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN_MASK             0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN                  0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN_MASK            0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN                 0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE_MASK           0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE                0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE_MASK          0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE               0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE_MASK          0x00000040L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE               0x00000040L
+#define CRTC2_GEN_CNTL__CRT2_ON_MASK                       0x00000080L
+#define CRTC2_GEN_CNTL__CRT2_ON                            0x00000080L
+#define CRTC2_GEN_CNTL__CRTC2_PIX_WIDTH_MASK               0x00000f00L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN_MASK                 0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN                      0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN_MASK                  0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN                       0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_MODE_MASK                0x00700000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS_MASK             0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS                  0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_EN_MASK                      0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_EN                           0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B_MASK           0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B                0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN_MASK               0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN                    0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS_MASK               0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS                    0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS_MASK               0x20000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS                    0x20000000L
+
+// AGP_CNTL
+#define AGP_CNTL__MAX_IDLE_CLK_MASK                        0x000000ffL
+#define AGP_CNTL__HOLD_RD_FIFO_MASK                        0x00000100L
+#define AGP_CNTL__HOLD_RD_FIFO                             0x00000100L
+#define AGP_CNTL__HOLD_RQ_FIFO_MASK                        0x00000200L
+#define AGP_CNTL__HOLD_RQ_FIFO                             0x00000200L
+#define AGP_CNTL__EN_2X_STBB_MASK                          0x00000400L
+#define AGP_CNTL__EN_2X_STBB                               0x00000400L
+#define AGP_CNTL__FORCE_FULL_SBA_MASK                      0x00000800L
+#define AGP_CNTL__FORCE_FULL_SBA                           0x00000800L
+#define AGP_CNTL__SBA_DIS_MASK                             0x00001000L
+#define AGP_CNTL__SBA_DIS                                  0x00001000L
+#define AGP_CNTL__AGP_REV_ID_MASK                          0x00002000L
+#define AGP_CNTL__AGP_REV_ID                               0x00002000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X_MASK                   0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X                        0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X_MASK                 0x00008000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X                      0x00008000L
+#define AGP_CNTL__FORCE_INT_VREF_MASK                      0x00010000L
+#define AGP_CNTL__FORCE_INT_VREF                           0x00010000L
+#define AGP_CNTL__PENDING_SLOTS_VAL_MASK                   0x00060000L
+#define AGP_CNTL__PENDING_SLOTS_SEL_MASK                   0x00080000L
+#define AGP_CNTL__PENDING_SLOTS_SEL                        0x00080000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X_MASK               0x00100000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X                    0x00100000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX_MASK                  0x00200000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX                       0x00200000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET_MASK             0x00400000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET                  0x00400000L
+#define AGP_CNTL__EN_RBFCALM_MASK                          0x00800000L
+#define AGP_CNTL__EN_RBFCALM                               0x00800000L
+#define AGP_CNTL__FORCE_EXT_VREF_MASK                      0x01000000L
+#define AGP_CNTL__FORCE_EXT_VREF                           0x01000000L
+#define AGP_CNTL__DIS_RBF_MASK                             0x02000000L
+#define AGP_CNTL__DIS_RBF                                  0x02000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN_MASK                  0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN                       0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_VAL_MASK                 0x38000000L
+#define AGP_CNTL__AGP_MISC_MASK                            0xc0000000L
+
+// AGP_CNTL
+#define	AGP_CNTL__MAX_IDLE_CLK__SHIFT                      0x00000000
+#define	AGP_CNTL__HOLD_RD_FIFO__SHIFT                      0x00000008
+#define	AGP_CNTL__HOLD_RQ_FIFO__SHIFT                      0x00000009
+#define	AGP_CNTL__EN_2X_STBB__SHIFT                        0x0000000a
+#define	AGP_CNTL__FORCE_FULL_SBA__SHIFT                    0x0000000b
+#define	AGP_CNTL__SBA_DIS__SHIFT                           0x0000000c
+#define	AGP_CNTL__AGP_REV_ID__SHIFT                        0x0000000d
+#define	AGP_CNTL__REG_CRIPPLE_AGP4X__SHIFT                 0x0000000e
+#define	AGP_CNTL__REG_CRIPPLE_AGP2X4X__SHIFT               0x0000000f
+#define	AGP_CNTL__FORCE_INT_VREF__SHIFT                    0x00000010
+#define	AGP_CNTL__PENDING_SLOTS_VAL__SHIFT                 0x00000011
+#define	AGP_CNTL__PENDING_SLOTS_SEL__SHIFT                 0x00000013
+#define	AGP_CNTL__EN_EXTENDED_AD_STB_2X__SHIFT             0x00000014
+#define	AGP_CNTL__DIS_QUEUED_GNT_FIX__SHIFT                0x00000015
+#define	AGP_CNTL__EN_RDATA2X4X_MULTIRESET__SHIFT           0x00000016
+#define	AGP_CNTL__EN_RBFCALM__SHIFT                        0x00000017
+#define	AGP_CNTL__FORCE_EXT_VREF__SHIFT                    0x00000018
+#define	AGP_CNTL__DIS_RBF__SHIFT                           0x00000019
+#define	AGP_CNTL__DELAY_FIRST_SBA_EN__SHIFT                0x0000001a
+#define	AGP_CNTL__DELAY_FIRST_SBA_VAL__SHIFT               0x0000001b
+#define	AGP_CNTL__AGP_MISC__SHIFT                          0x0000001e
+
+// DISP_MISC_CNTL
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP_MASK            0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP                 0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP_MASK          0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP               0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP_MASK             0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP                  0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK_MASK          0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK               0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK_MASK        0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK             0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK_MASK           0x00000040L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK                0x00000040L
+#define DISP_MISC_CNTL__SYNC_STRENGTH_MASK                 0x00000300L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN_MASK              0x00000400L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN                   0x00000400L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP_MASK           0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP                0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK_MASK         0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK              0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS_MASK               0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS                    0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS_MASK               0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS                    0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS_MASK           0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS                0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV_MASK                 0x00080000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV                      0x00080000L
+#define DISP_MISC_CNTL__PALETTE2_MEM_RD_MARGIN_MASK        0x00f00000L
+#define DISP_MISC_CNTL__PALETTE_MEM_RD_MARGIN_MASK         0x0f000000L
+#define DISP_MISC_CNTL__RMX_BUF_MEM_RD_MARGIN_MASK         0xf0000000L
+
+// DISP_PWR_MAN
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN_MASK         0x00000001L
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN              0x00000001L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN_MASK       0x00000010L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN            0x00000010L
+#define DISP_PWR_MAN__DISP_PWR_MAN_DPMS_MASK               0x00000300L
+#define DISP_PWR_MAN__DISP_D3_RST_MASK                     0x00010000L
+#define DISP_PWR_MAN__DISP_D3_RST                          0x00010000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST_MASK                 0x00020000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST                      0x00020000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST_MASK                0x00040000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST                     0x00040000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST_MASK              0x00080000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST                   0x00080000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST_MASK                 0x00100000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST                      0x00100000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST_MASK              0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST                   0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST_MASK            0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST                 0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST_MASK               0x00800000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST                    0x00800000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST_MASK             0x01000000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST                  0x01000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST_MASK                   0x02000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST                        0x02000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN_MASK                   0x04000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN                        0x04000000L
+
+// MC_IND_INDEX
+#define MC_IND_INDEX__MC_IND_ADDR_MASK                     0x0000001fL
+#define MC_IND_INDEX__MC_IND_WR_EN_MASK                    0x00000100L
+#define MC_IND_INDEX__MC_IND_WR_EN                         0x00000100L
+
+// MC_IND_DATA
+#define MC_IND_DATA__MC_IND_DATA_MASK                      0xffffffffL
+
+// MC_CHP_IO_CNTL_A1
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA__SHIFT            0x00000000
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA__SHIFT             0x00000001
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA__SHIFT           0x00000002
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA__SHIFT           0x00000003
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA__SHIFT            0x00000004
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA__SHIFT             0x00000005
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA__SHIFT           0x00000006
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA__SHIFT           0x00000007
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA__SHIFT            0x00000008
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA__SHIFT          0x00000009
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA__SHIFT          0x0000000a
+#define	MC_CHP_IO_CNTL_A1__MEM_IO_MODEA__SHIFT             0x0000000c
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_CKA__SHIFT              0x0000000e
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_AA__SHIFT               0x00000010
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_DQMA__SHIFT             0x00000012
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_DQSA__SHIFT             0x00000014
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA__SHIFT          0x00000016
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA__SHIFT         0x00000017
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT             0x00000018
+#define	MC_CHP_IO_CNTL_A1__MEM_CLK_SELA__SHIFT             0x0000001a
+#define	MC_CHP_IO_CNTL_A1__MEM_CLK_INVA__SHIFT             0x0000001c
+#define	MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A__SHIFT         0x0000001e
+#define	MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A__SHIFT         0x0000001f
+
+// MC_CHP_IO_CNTL_B1
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB__SHIFT            0x00000000
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB__SHIFT             0x00000001
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB__SHIFT           0x00000002
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB__SHIFT           0x00000003
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB__SHIFT            0x00000004
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB__SHIFT             0x00000005
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB__SHIFT           0x00000006
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB__SHIFT           0x00000007
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB__SHIFT            0x00000008
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB__SHIFT          0x00000009
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB__SHIFT          0x0000000a
+#define	MC_CHP_IO_CNTL_B1__MEM_IO_MODEB__SHIFT             0x0000000c
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_CKB__SHIFT              0x0000000e
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_AB__SHIFT               0x00000010
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_DQMB__SHIFT             0x00000012
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_DQSB__SHIFT             0x00000014
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB__SHIFT          0x00000016
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB__SHIFT         0x00000017
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT             0x00000018
+#define	MC_CHP_IO_CNTL_B1__MEM_CLK_SELB__SHIFT             0x0000001a
+#define	MC_CHP_IO_CNTL_B1__MEM_CLK_INVB__SHIFT             0x0000001c
+#define	MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B__SHIFT         0x0000001e
+#define	MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B__SHIFT         0x0000001f
+
+// MC_CHP_IO_CNTL_A1
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA_MASK              0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA                   0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA_MASK               0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA                    0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA_MASK             0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA                  0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA_MASK             0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA                  0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA_MASK              0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA                   0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA_MASK               0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA                    0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA_MASK             0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA                  0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA_MASK             0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA                  0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA_MASK              0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA                   0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA_MASK            0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA                 0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA_MASK            0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA                 0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_IO_MODEA_MASK               0x00003000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_CKA_MASK                0x0000c000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_AA_MASK                 0x00030000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQMA_MASK               0x000c0000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQSA_MASK               0x00300000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA_MASK            0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA                 0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA_MASK           0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA                0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK               0x03000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_SELA_MASK               0x0c000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA_MASK               0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA                    0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A_MASK           0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A                0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A_MASK           0x80000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A                0x80000000L
+
+// MC_CHP_IO_CNTL_B1
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB_MASK              0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB                   0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB_MASK               0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB                    0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB_MASK             0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB                  0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB_MASK             0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB                  0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB_MASK              0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB                   0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB_MASK               0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB                    0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB_MASK             0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB                  0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB_MASK             0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB                  0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB_MASK              0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB                   0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB_MASK            0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB                 0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB_MASK            0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB                 0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_IO_MODEB_MASK               0x00003000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_CKB_MASK                0x0000c000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_AB_MASK                 0x00030000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQMB_MASK               0x000c0000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQSB_MASK               0x00300000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB_MASK            0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB                 0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB_MASK           0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB                0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK               0x03000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_SELB_MASK               0x0c000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB_MASK               0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB                    0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B_MASK           0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B                0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B_MASK           0x80000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B                0x80000000L
+
+// MEM_SDRAM_MODE_REG
+#define MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK              0x00007fffL
+#define MEM_SDRAM_MODE_REG__MEM_WR_LATENCY_MASK            0x000f0000L
+#define MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY_MASK           0x00700000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY_MASK           0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY                0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY_MASK           0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY                0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD_MASK          0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD               0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA_MASK         0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA              0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR_MASK          0x08000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR               0x08000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE_MASK          0x10000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE               0x10000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL_MASK               0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL                    0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE_MASK              0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE                   0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET_MASK           0x80000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET                0x80000000L
+
+// MEM_SDRAM_MODE_REG
+#define	MEM_SDRAM_MODE_REG__MEM_MODE_REG__SHIFT            0x00000000
+#define	MEM_SDRAM_MODE_REG__MEM_WR_LATENCY__SHIFT          0x00000010
+#define	MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY__SHIFT         0x00000014
+#define	MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY__SHIFT         0x00000017
+#define	MEM_SDRAM_MODE_REG__MEM_STR_LATENCY__SHIFT         0x00000018
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD__SHIFT        0x00000019
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA__SHIFT       0x0000001a
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR__SHIFT        0x0000001b
+#define	MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE__SHIFT        0x0000001c
+#define	MEM_SDRAM_MODE_REG__MEM_DDR_DLL__SHIFT             0x0000001d
+#define	MEM_SDRAM_MODE_REG__MEM_CFG_TYPE__SHIFT            0x0000001e
+#define	MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET__SHIFT         0x0000001f
+
+// MEM_REFRESH_CNTL
+#define MEM_REFRESH_CNTL__MEM_REFRESH_RATE_MASK            0x000000ffL
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS_MASK             0x00000100L
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS                  0x00000100L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE_MASK             0x00000200L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE                  0x00000200L
+#define MEM_REFRESH_CNTL__MEM_TRFC_MASK                    0x0000f000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE_MASK            0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE                 0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE_MASK           0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE                0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE_MASK            0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE                 0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE_MASK           0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE                0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE_MASK           0x00100000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE                0x00100000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKA_MASK             0x00c00000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE_MASK            0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE                 0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE_MASK           0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE                0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE_MASK            0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE                 0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE_MASK           0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE                0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE_MASK           0x10000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE                0x10000000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKB_MASK             0xc0000000L
+
+// MC_STATUS
+#define MC_STATUS__MEM_PWRUP_COMPL_A_MASK                  0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_A                       0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_B_MASK                  0x00000002L
+#define MC_STATUS__MEM_PWRUP_COMPL_B                       0x00000002L
+#define MC_STATUS__MC_IDLE_MASK                            0x00000004L
+#define MC_STATUS__MC_IDLE                                 0x00000004L
+#define MC_STATUS__IMP_N_VALUE_R_BACK_MASK                 0x00000078L
+#define MC_STATUS__IMP_P_VALUE_R_BACK_MASK                 0x00000780L
+#define MC_STATUS__TEST_OUT_R_BACK_MASK                    0x00000800L
+#define MC_STATUS__TEST_OUT_R_BACK                         0x00000800L
+#define MC_STATUS__DUMMY_OUT_R_BACK_MASK                   0x00001000L
+#define MC_STATUS__DUMMY_OUT_R_BACK                        0x00001000L
+#define MC_STATUS__IMP_N_VALUE_A_R_BACK_MASK               0x0001e000L
+#define MC_STATUS__IMP_P_VALUE_A_R_BACK_MASK               0x001e0000L
+#define MC_STATUS__IMP_N_VALUE_CK_R_BACK_MASK              0x01e00000L
+#define MC_STATUS__IMP_P_VALUE_CK_R_BACK_MASK              0x1e000000L
+
+// MDLL_CKO
+#define MDLL_CKO__MCKOA_SLEEP_MASK                         0x00000001L
+#define MDLL_CKO__MCKOA_SLEEP                              0x00000001L
+#define MDLL_CKO__MCKOA_RESET_MASK                         0x00000002L
+#define MDLL_CKO__MCKOA_RESET                              0x00000002L
+#define MDLL_CKO__MCKOA_RANGE_MASK                         0x0000000cL
+#define MDLL_CKO__ERSTA_SOUTSEL_MASK                       0x00000030L
+#define MDLL_CKO__MCKOA_FB_SEL_MASK                        0x000000c0L
+#define MDLL_CKO__MCKOA_REF_SKEW_MASK                      0x00000700L
+#define MDLL_CKO__MCKOA_FB_SKEW_MASK                       0x00007000L
+#define MDLL_CKO__MCKOA_BP_SEL_MASK                        0x00008000L
+#define MDLL_CKO__MCKOA_BP_SEL                             0x00008000L
+#define MDLL_CKO__MCKOB_SLEEP_MASK                         0x00010000L
+#define MDLL_CKO__MCKOB_SLEEP                              0x00010000L
+#define MDLL_CKO__MCKOB_RESET_MASK                         0x00020000L
+#define MDLL_CKO__MCKOB_RESET                              0x00020000L
+#define MDLL_CKO__MCKOB_RANGE_MASK                         0x000c0000L
+#define MDLL_CKO__ERSTB_SOUTSEL_MASK                       0x00300000L
+#define MDLL_CKO__MCKOB_FB_SEL_MASK                        0x00c00000L
+#define MDLL_CKO__MCKOB_REF_SKEW_MASK                      0x07000000L
+#define MDLL_CKO__MCKOB_FB_SKEW_MASK                       0x70000000L
+#define MDLL_CKO__MCKOB_BP_SEL_MASK                        0x80000000L
+#define MDLL_CKO__MCKOB_BP_SEL                             0x80000000L
+
+// MDLL_RDCKA
+#define MDLL_RDCKA__MRDCKA0_SLEEP_MASK                     0x00000001L
+#define MDLL_RDCKA__MRDCKA0_SLEEP                          0x00000001L
+#define MDLL_RDCKA__MRDCKA0_RESET_MASK                     0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RESET                          0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RANGE_MASK                     0x0000000cL
+#define MDLL_RDCKA__MRDCKA0_REF_SEL_MASK                   0x00000030L
+#define MDLL_RDCKA__MRDCKA0_FB_SEL_MASK                    0x000000c0L
+#define MDLL_RDCKA__MRDCKA0_REF_SKEW_MASK                  0x00000700L
+#define MDLL_RDCKA__MRDCKA0_SINSEL_MASK                    0x00000800L
+#define MDLL_RDCKA__MRDCKA0_SINSEL                         0x00000800L
+#define MDLL_RDCKA__MRDCKA0_FB_SKEW_MASK                   0x00007000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL_MASK                    0x00008000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL                         0x00008000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP_MASK                     0x00010000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP                          0x00010000L
+#define MDLL_RDCKA__MRDCKA1_RESET_MASK                     0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RESET                          0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RANGE_MASK                     0x000c0000L
+#define MDLL_RDCKA__MRDCKA1_REF_SEL_MASK                   0x00300000L
+#define MDLL_RDCKA__MRDCKA1_FB_SEL_MASK                    0x00c00000L
+#define MDLL_RDCKA__MRDCKA1_REF_SKEW_MASK                  0x07000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL_MASK                    0x08000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL                         0x08000000L
+#define MDLL_RDCKA__MRDCKA1_FB_SKEW_MASK                   0x70000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL_MASK                    0x80000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL                         0x80000000L
+
+// MDLL_RDCKB
+#define MDLL_RDCKB__MRDCKB0_SLEEP_MASK                     0x00000001L
+#define MDLL_RDCKB__MRDCKB0_SLEEP                          0x00000001L
+#define MDLL_RDCKB__MRDCKB0_RESET_MASK                     0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RESET                          0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RANGE_MASK                     0x0000000cL
+#define MDLL_RDCKB__MRDCKB0_REF_SEL_MASK                   0x00000030L
+#define MDLL_RDCKB__MRDCKB0_FB_SEL_MASK                    0x000000c0L
+#define MDLL_RDCKB__MRDCKB0_REF_SKEW_MASK                  0x00000700L
+#define MDLL_RDCKB__MRDCKB0_SINSEL_MASK                    0x00000800L
+#define MDLL_RDCKB__MRDCKB0_SINSEL                         0x00000800L
+#define MDLL_RDCKB__MRDCKB0_FB_SKEW_MASK                   0x00007000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL_MASK                    0x00008000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL                         0x00008000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP_MASK                     0x00010000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP                          0x00010000L
+#define MDLL_RDCKB__MRDCKB1_RESET_MASK                     0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RESET                          0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RANGE_MASK                     0x000c0000L
+#define MDLL_RDCKB__MRDCKB1_REF_SEL_MASK                   0x00300000L
+#define MDLL_RDCKB__MRDCKB1_FB_SEL_MASK                    0x00c00000L
+#define MDLL_RDCKB__MRDCKB1_REF_SKEW_MASK                  0x07000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL_MASK                    0x08000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL                         0x08000000L
+#define MDLL_RDCKB__MRDCKB1_FB_SKEW_MASK                   0x70000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL_MASK                    0x80000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL                         0x80000000L
+
+#define MDLL_R300_RDCK__MRDCKA_SLEEP                       0x00000001L
+#define MDLL_R300_RDCK__MRDCKA_RESET                       0x00000002L
+#define MDLL_R300_RDCK__MRDCKB_SLEEP                       0x00000004L
+#define MDLL_R300_RDCK__MRDCKB_RESET                       0x00000008L
+#define MDLL_R300_RDCK__MRDCKC_SLEEP                       0x00000010L
+#define MDLL_R300_RDCK__MRDCKC_RESET                       0x00000020L
+#define MDLL_R300_RDCK__MRDCKD_SLEEP                       0x00000040L
+#define MDLL_R300_RDCK__MRDCKD_RESET                       0x00000080L
+
+#define pllCLK_PIN_CNTL                             0x0001
+#define pllPPLL_CNTL                                0x0002
+#define pllPPLL_REF_DIV                             0x0003
+#define pllPPLL_DIV_0                               0x0004
+#define pllPPLL_DIV_1                               0x0005
+#define pllPPLL_DIV_2                               0x0006
+#define pllPPLL_DIV_3                               0x0007
+#define pllVCLK_ECP_CNTL                            0x0008
+#define pllHTOTAL_CNTL                              0x0009
+#define pllM_SPLL_REF_FB_DIV                        0x000A
+#define pllAGP_PLL_CNTL                             0x000B
+#define pllSPLL_CNTL                                0x000C
+#define pllSCLK_CNTL                                0x000D
+#define pllMPLL_CNTL                                0x000E
+#define pllMDLL_CKO                                 0x000F
+#define pllMDLL_RDCKA                               0x0010
+#define pllMDLL_RDCKB                               0x0011
+#define pllMCLK_CNTL                                0x0012
+#define pllPLL_TEST_CNTL                            0x0013
+#define pllCLK_PWRMGT_CNTL                          0x0014
+#define pllPLL_PWRMGT_CNTL                          0x0015
+#define pllCG_TEST_MACRO_RW_WRITE                   0x0016
+#define pllCG_TEST_MACRO_RW_READ                    0x0017
+#define pllCG_TEST_MACRO_RW_DATA                    0x0018
+#define pllCG_TEST_MACRO_RW_CNTL                    0x0019
+#define pllDISP_TEST_MACRO_RW_WRITE                 0x001A
+#define pllDISP_TEST_MACRO_RW_READ                  0x001B
+#define pllDISP_TEST_MACRO_RW_DATA                  0x001C
+#define pllDISP_TEST_MACRO_RW_CNTL                  0x001D
+#define pllSCLK_CNTL2                               0x001E
+#define pllMCLK_MISC                                0x001F
+#define pllTV_PLL_FINE_CNTL                         0x0020
+#define pllTV_PLL_CNTL                              0x0021
+#define pllTV_PLL_CNTL1                             0x0022
+#define pllTV_DTO_INCREMENTS                        0x0023
+#define pllSPLL_AUX_CNTL                            0x0024
+#define pllMPLL_AUX_CNTL                            0x0025
+#define pllP2PLL_CNTL                               0x002A
+#define pllP2PLL_REF_DIV                            0x002B
+#define pllP2PLL_DIV_0                              0x002C
+#define pllPIXCLKS_CNTL                             0x002D
+#define pllHTOTAL2_CNTL                             0x002E
+#define pllSSPLL_CNTL                               0x0030
+#define pllSSPLL_REF_DIV                            0x0031
+#define pllSSPLL_DIV_0                              0x0032
+#define pllSS_INT_CNTL                              0x0033
+#define pllSS_TST_CNTL                              0x0034
+#define pllSCLK_MORE_CNTL                           0x0035
+
+#define ixMC_PERF_CNTL                             0x0000
+#define ixMC_PERF_SEL                              0x0001
+#define ixMC_PERF_REGION_0                         0x0002
+#define ixMC_PERF_REGION_1                         0x0003
+#define ixMC_PERF_COUNT_0                          0x0004
+#define ixMC_PERF_COUNT_1                          0x0005
+#define ixMC_PERF_COUNT_2                          0x0006
+#define ixMC_PERF_COUNT_3                          0x0007
+#define ixMC_PERF_COUNT_MEMCH_A                    0x0008
+#define ixMC_PERF_COUNT_MEMCH_B                    0x0009
+#define ixMC_IMP_CNTL                              0x000A
+#define ixMC_CHP_IO_CNTL_A0                        0x000B
+#define ixMC_CHP_IO_CNTL_A1                        0x000C
+#define ixMC_CHP_IO_CNTL_B0                        0x000D
+#define ixMC_CHP_IO_CNTL_B1                        0x000E
+#define ixMC_IMP_CNTL_0                            0x000F
+#define ixTC_MISMATCH_1                            0x0010
+#define ixTC_MISMATCH_2                            0x0011
+#define ixMC_BIST_CTRL                             0x0012
+#define ixREG_COLLAR_WRITE                         0x0013
+#define ixREG_COLLAR_READ                          0x0014
+#define ixR300_MC_IMP_CNTL                         0x0018
+#define ixR300_MC_CHP_IO_CNTL_A0                   0x0019
+#define ixR300_MC_CHP_IO_CNTL_A1                   0x001a
+#define ixR300_MC_CHP_IO_CNTL_B0                   0x001b
+#define ixR300_MC_CHP_IO_CNTL_B1                   0x001c
+#define ixR300_MC_CHP_IO_CNTL_C0                   0x001d
+#define ixR300_MC_CHP_IO_CNTL_C1                   0x001e
+#define ixR300_MC_CHP_IO_CNTL_D0                   0x001f
+#define ixR300_MC_CHP_IO_CNTL_D1                   0x0020
+#define ixR300_MC_IMP_CNTL_0                       0x0021
+#define ixR300_MC_ELPIDA_CNTL                      0x0022
+#define ixR300_MC_CHP_IO_OE_CNTL_CD                0x0023
+#define ixR300_MC_READ_CNTL_CD                     0x0024
+#define ixR300_MC_MC_INIT_WR_LAT_TIMER             0x0025
+#define ixR300_MC_DEBUG_CNTL                       0x0026
+#define ixR300_MC_BIST_CNTL_0                      0x0028
+#define ixR300_MC_BIST_CNTL_1                      0x0029
+#define ixR300_MC_BIST_CNTL_2                      0x002a
+#define ixR300_MC_BIST_CNTL_3                      0x002b
+#define ixR300_MC_BIST_CNTL_4                      0x002c
+#define ixR300_MC_BIST_CNTL_5                      0x002d
+#define ixR300_MC_IMP_STATUS                       0x002e
+#define ixR300_MC_DLL_CNTL                         0x002f
+#define NB_TOM                                     0x15C
+
+
+#endif	/* _RADEON_H */
+
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
new file mode 100644
index 000000000000..f06cc88607f5
--- /dev/null
+++ b/include/video/s1d13xxxfb.h
@@ -0,0 +1,166 @@
+/* drivers/video/s1d3xxxfb.h
+ *
+ * (c) 2004 Simtec Electronics
+ * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * Header file for Epson S1D13XXX driver code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef	S1D13XXXFB_H
+#define	S1D13XXXFB_H
+
+#define S1D_PALETTE_SIZE		256
+#define S1D_CHIP_REV			7	/* expected chip revision number for s1d13806 */
+#define S1D_FBID			"S1D13806"
+#define S1D_DEVICENAME			"s1d13806fb"
+
+/* register definitions (tested on s1d13896) */
+#define S1DREG_REV_CODE			0x0000	/* Revision Code Register */
+#define S1DREG_MISC			0x0001	/* Miscellaneous Register */
+#define S1DREG_GPIO_CNF0		0x0004	/* General IO Pins Configuration Register 0 */
+#define S1DREG_GPIO_CNF1		0x0005	/* General IO Pins Configuration Register 1 */
+#define S1DREG_GPIO_CTL0		0x0008	/* General IO Pins Control Register 0 */
+#define S1DREG_GPIO_CTL1		0x0009	/* General IO Pins Control Register 1 */
+#define S1DREG_CNF_STATUS		0x000C	/* Configuration Status Readback Register */
+#define S1DREG_CLK_CNF			0x0010	/* Memory Clock Configuration Register */
+#define S1DREG_LCD_CLK_CNF		0x0014	/* LCD Pixel Clock Configuration Register */
+#define S1DREG_CRT_CLK_CNF		0x0018	/* CRT/TV Pixel Clock Configuration Register */
+#define S1DREG_MPLUG_CLK_CNF		0x001C	/* MediaPlug Clock Configuration Register */
+#define S1DREG_CPU2MEM_WST_SEL		0x001E	/* CPU To Memory Wait State Select Register */
+#define S1DREG_MEM_CNF			0x0020	/* Memory Configuration Register */
+#define S1DREG_SDRAM_REF_RATE		0x0021	/* SDRAM Refresh Rate Register */
+#define S1DREG_SDRAM_TC0		0x002A	/* SDRAM Timing Control Register 0 */
+#define S1DREG_SDRAM_TC1		0x002B	/* SDRAM Timing Control Register 1 */
+#define S1DREG_PANEL_TYPE		0x0030	/* Panel Type Register */
+#define S1DREG_MOD_RATE			0x0031	/* MOD Rate Register */
+#define S1DREG_LCD_DISP_HWIDTH		0x0032	/* LCD Horizontal Display Width Register: ((val)+1)*8)=pix/line */
+#define S1DREG_LCD_NDISP_HPER		0x0034	/* LCD Horizontal Non-Display Period Register: ((val)+1)*8)=NDpix/line */
+#define S1DREG_TFT_FPLINE_START		0x0035	/* TFT FPLINE Start Position Register */
+#define S1DREG_TFT_FPLINE_PWIDTH	0x0036	/* TFT FPLINE Pulse Width Register. */
+#define S1DREG_LCD_DISP_VHEIGHT0	0x0038	/* LCD Vertical Display Height Register 0 */
+#define S1DREG_LCD_DISP_VHEIGHT1	0x0039	/* LCD Vertical Display Height Register 1 */
+#define S1DREG_LCD_NDISP_VPER		0x003A	/* LCD Vertical Non-Display Period Register: (val)+1=NDlines */
+#define S1DREG_TFT_FPFRAME_START	0x003B	/* TFT FPFRAME Start Position Register */
+#define S1DREG_TFT_FPFRAME_PWIDTH	0x003C	/* TFT FPFRAME Pulse Width Register */
+#define S1DREG_LCD_DISP_MODE		0x0040	/* LCD Display Mode Register */
+#define S1DREG_LCD_MISC			0x0041	/* LCD Miscellaneous Register */
+#define S1DREG_LCD_DISP_START0		0x0042	/* LCD Display Start Address Register 0 */
+#define S1DREG_LCD_DISP_START1		0x0043	/* LCD Display Start Address Register 1 */
+#define S1DREG_LCD_DISP_START2		0x0044	/* LCD Display Start Address Register 2 */
+#define S1DREG_LCD_MEM_OFF0		0x0046	/* LCD Memory Address Offset Register 0 */
+#define S1DREG_LCD_MEM_OFF1		0x0047	/* LCD Memory Address Offset Register 1 */
+#define S1DREG_LCD_PIX_PAN		0x0048	/* LCD Pixel Panning Register */
+#define S1DREG_LCD_DISP_FIFO_HTC	0x004A	/* LCD Display FIFO High Threshold Control Register */
+#define S1DREG_LCD_DISP_FIFO_LTC	0x004B	/* LCD Display FIFO Low Threshold Control Register */
+#define S1DREG_CRT_DISP_HWIDTH		0x0050	/* CRT/TV Horizontal Display Width Register: ((val)+1)*8)=pix/line */
+#define S1DREG_CRT_NDISP_HPER		0x0052	/* CRT/TV Horizontal Non-Display Period Register */
+#define S1DREG_CRT_HRTC_START		0x0053	/* CRT/TV HRTC Start Position Register */
+#define S1DREG_CRT_HRTC_PWIDTH		0x0054	/* CRT/TV HRTC Pulse Width Register */
+#define S1DREG_CRT_DISP_VHEIGHT0	0x0056	/* CRT/TV Vertical Display Height Register 0 */
+#define S1DREG_CRT_DISP_VHEIGHT1	0x0057	/* CRT/TV Vertical Display Height Register 1 */
+#define S1DREG_CRT_NDISP_VPER		0x0058	/* CRT/TV Vertical Non-Display Period Register */
+#define S1DREG_CRT_VRTC_START		0x0059	/* CRT/TV VRTC Start Position Register */
+#define S1DREG_CRT_VRTC_PWIDTH		0x005A	/* CRT/TV VRTC Pulse Width Register */
+#define S1DREG_TV_OUT_CTL		0x005B	/* TV Output Control Register */
+#define S1DREG_CRT_DISP_MODE		0x0060	/* CRT/TV Display Mode Register */
+#define S1DREG_CRT_DISP_START0		0x0062	/* CRT/TV Display Start Address Register 0 */
+#define S1DREG_CRT_DISP_START1		0x0063	/* CRT/TV Display Start Address Register 1 */
+#define S1DREG_CRT_DISP_START2		0x0064	/* CRT/TV Display Start Address Register 2 */
+#define S1DREG_CRT_MEM_OFF0		0x0066	/* CRT/TV Memory Address Offset Register 0 */
+#define S1DREG_CRT_MEM_OFF1		0x0067	/* CRT/TV Memory Address Offset Register 1 */
+#define S1DREG_CRT_PIX_PAN		0x0068	/* CRT/TV Pixel Panning Register */
+#define S1DREG_CRT_DISP_FIFO_HTC	0x006A	/* CRT/TV Display FIFO High Threshold Control Register */
+#define S1DREG_CRT_DISP_FIFO_LTC	0x006B	/* CRT/TV Display FIFO Low Threshold Control Register */
+#define S1DREG_LCD_CUR_CTL		0x0070	/* LCD Ink/Cursor Control Register */
+#define S1DREG_LCD_CUR_START		0x0071	/* LCD Ink/Cursor Start Address Register */
+#define S1DREG_LCD_CUR_XPOS0		0x0072	/* LCD Cursor X Position Register 0 */
+#define S1DREG_LCD_CUR_XPOS1		0x0073	/* LCD Cursor X Position Register 1 */
+#define S1DREG_LCD_CUR_YPOS0		0x0074	/* LCD Cursor Y Position Register 0 */
+#define S1DREG_LCD_CUR_YPOS1		0x0075	/* LCD Cursor Y Position Register 1 */
+#define S1DREG_LCD_CUR_BCTL0		0x0076	/* LCD Ink/Cursor Blue Color 0 Register */
+#define S1DREG_LCD_CUR_GCTL0		0x0077	/* LCD Ink/Cursor Green Color 0 Register */
+#define S1DREG_LCD_CUR_RCTL0		0x0078	/* LCD Ink/Cursor Red Color 0 Register */
+#define S1DREG_LCD_CUR_BCTL1		0x007A	/* LCD Ink/Cursor Blue Color 1 Register */
+#define S1DREG_LCD_CUR_GCTL1		0x007B	/* LCD Ink/Cursor Green Color 1 Register */
+#define S1DREG_LCD_CUR_RCTL1		0x007C	/* LCD Ink/Cursor Red Color 1 Register */
+#define S1DREG_LCD_CUR_FIFO_HTC		0x007E	/* LCD Ink/Cursor FIFO High Threshold Register */
+#define S1DREG_CRT_CUR_CTL		0x0080	/* CRT/TV Ink/Cursor Control Register */
+#define S1DREG_CRT_CUR_START		0x0081	/* CRT/TV Ink/Cursor Start Address Register */
+#define S1DREG_CRT_CUR_XPOS0		0x0082	/* CRT/TV Cursor X Position Register 0 */
+#define S1DREG_CRT_CUR_XPOS1		0x0083	/* CRT/TV Cursor X Position Register 1 */
+#define S1DREG_CRT_CUR_YPOS0		0x0084	/* CRT/TV Cursor Y Position Register 0 */
+#define S1DREG_CRT_CUR_YPOS1		0x0085	/* CRT/TV Cursor Y Position Register 1 */
+#define S1DREG_CRT_CUR_BCTL0		0x0086	/* CRT/TV Ink/Cursor Blue Color 0 Register */
+#define S1DREG_CRT_CUR_GCTL0		0x0087	/* CRT/TV Ink/Cursor Green Color 0 Register */
+#define S1DREG_CRT_CUR_RCTL0		0x0088	/* CRT/TV Ink/Cursor Red Color 0 Register */
+#define S1DREG_CRT_CUR_BCTL1		0x008A	/* CRT/TV Ink/Cursor Blue Color 1 Register */
+#define S1DREG_CRT_CUR_GCTL1		0x008B	/* CRT/TV Ink/Cursor Green Color 1 Register */
+#define S1DREG_CRT_CUR_RCTL1		0x008C	/* CRT/TV Ink/Cursor Red Color 1 Register */
+#define S1DREG_CRT_CUR_FIFO_HTC		0x008E	/* CRT/TV Ink/Cursor FIFO High Threshold Register */
+#define S1DREG_BBLT_CTL0		0x0100	/* BitBLT Control Register 0 */
+#define S1DREG_BBLT_CTL1		0x0101	/* BitBLT Control Register 1 */
+#define S1DREG_BBLT_CC_EXP		0x0102	/* BitBLT Code/Color Expansion Register */
+#define S1DREG_BBLT_OP			0x0103	/* BitBLT Operation Register */
+#define S1DREG_BBLT_SRC_START0		0x0104	/* BitBLT Source Start Address Register 0 */
+#define S1DREG_BBLT_SRC_START1		0x0105	/* BitBLT Source Start Address Register 1 */
+#define S1DREG_BBLT_SRC_START2		0x0106	/* BitBLT Source Start Address Register 2 */
+#define S1DREG_BBLT_DST_START0		0x0108	/* BitBLT Destination Start Address Register 0 */
+#define S1DREG_BBLT_DST_START1		0x0109	/* BitBLT Destination Start Address Register 1 */
+#define S1DREG_BBLT_DST_START2		0x010A	/* BitBLT Destination Start Address Register 2 */
+#define S1DREG_BBLT_MEM_OFF0		0x010C	/* BitBLT Memory Address Offset Register 0 */
+#define S1DREG_BBLT_MEM_OFF1		0x010D	/* BitBLT Memory Address Offset Register 1 */
+#define S1DREG_BBLT_WIDTH0		0x0110	/* BitBLT Width Register 0 */
+#define S1DREG_BBLT_WIDTH1		0x0111	/* BitBLT Width Register 1 */
+#define S1DREG_BBLT_HEIGHT0		0x0112	/* BitBLT Height Register 0 */
+#define S1DREG_BBLT_HEIGHT1		0x0113	/* BitBLT Height Register 1 */
+#define S1DREG_BBLT_BGC0		0x0114	/* BitBLT Background Color Register 0 */
+#define S1DREG_BBLT_BGC1		0x0115	/* BitBLT Background Color Register 1 */
+#define S1DREG_BBLT_FGC0		0x0118	/* BitBLT Foreground Color Register 0 */
+#define S1DREG_BBLT_FGC1		0x0119	/* BitBLT Foreground Color Register 1 */
+#define S1DREG_LKUP_MODE		0x01E0	/* Look-Up Table Mode Register */
+#define S1DREG_LKUP_ADDR		0x01E2	/* Look-Up Table Address Register */
+#define S1DREG_LKUP_DATA		0x01E4	/* Look-Up Table Data Register */
+#define S1DREG_PS_CNF			0x01F0	/* Power Save Configuration Register */
+#define S1DREG_PS_STATUS		0x01F1	/* Power Save Status Register */
+#define S1DREG_CPU2MEM_WDOGT		0x01F4	/* CPU-to-Memory Access Watchdog Timer Register */
+#define S1DREG_COM_DISP_MODE		0x01FC	/* Common Display Mode Register */
+
+#define S1DREG_DELAYOFF			0xFFFE
+#define S1DREG_DELAYON			0xFFFF
+
+/* Note: all above defines should go in separate header files
+   when implementing other S1D13xxx chip support. */
+
+struct s1d13xxxfb_regval {
+	u16	addr;
+	u8	value;
+};
+
+
+struct s1d13xxxfb_par {
+	void __iomem	*regs;
+	unsigned char	display;
+
+	unsigned int	pseudo_palette[16];
+#ifdef CONFIG_PM
+	void		*regs_save;	/* pm saves all registers here */
+	void		*disp_save;	/* pm saves entire screen here */
+#endif
+};
+
+struct s1d13xxxfb_pdata {
+	const struct s1d13xxxfb_regval	*initregs;
+	const unsigned int		initregssize;
+	void				(*platform_init_video)(void);
+#ifdef CONFIG_PM
+	int				(*platform_suspend_video)(void);
+	int				(*platform_resume_video)(void);
+#endif
+};
+
+#endif
+
diff --git a/include/video/s3blit.h b/include/video/s3blit.h
new file mode 100644
index 000000000000..b1db63187b4e
--- /dev/null
+++ b/include/video/s3blit.h
@@ -0,0 +1,79 @@
+#ifndef _VIDEO_S3BLIT_H
+#define _VIDEO_S3BLIT_H
+
+/* s3 commands */
+#define S3_BITBLT       0xc011
+#define S3_TWOPOINTLINE 0x2811
+#define S3_FILLEDRECT   0x40b1
+
+#define S3_FIFO_EMPTY 0x0400
+#define S3_HDW_BUSY   0x0200
+
+/* Enhanced register mapping (MMIO mode) */
+
+#define S3_READ_SEL      0xbee8 /* offset f */
+#define S3_MULT_MISC     0xbee8 /* offset e */
+#define S3_ERR_TERM      0x92e8
+#define S3_FRGD_COLOR    0xa6e8
+#define S3_BKGD_COLOR    0xa2e8
+#define S3_PIXEL_CNTL    0xbee8 /* offset a */
+#define S3_FRGD_MIX      0xbae8
+#define S3_BKGD_MIX      0xb6e8
+#define S3_CUR_Y         0x82e8
+#define S3_CUR_X         0x86e8
+#define S3_DESTY_AXSTP   0x8ae8
+#define S3_DESTX_DIASTP  0x8ee8
+#define S3_MIN_AXIS_PCNT 0xbee8 /* offset 0 */
+#define S3_MAJ_AXIS_PCNT 0x96e8
+#define S3_CMD           0x9ae8
+#define S3_GP_STAT       0x9ae8
+#define S3_ADVFUNC_CNTL  0x4ae8
+#define S3_WRT_MASK      0xaae8
+#define S3_RD_MASK       0xaee8
+
+/* Enhanced register mapping (Packed MMIO mode, write only) */
+#define S3_ALT_CURXY     0x8100
+#define S3_ALT_CURXY2    0x8104
+#define S3_ALT_STEP      0x8108
+#define S3_ALT_STEP2     0x810c
+#define S3_ALT_ERR       0x8110
+#define S3_ALT_CMD       0x8118
+#define S3_ALT_MIX       0x8134
+#define S3_ALT_PCNT      0x8148
+#define S3_ALT_PAT       0x8168
+
+/* Drawing modes */
+#define S3_NOTCUR          0x0000
+#define S3_LOGICALZERO     0x0001
+#define S3_LOGICALONE      0x0002
+#define S3_LEAVEASIS       0x0003
+#define S3_NOTNEW          0x0004
+#define S3_CURXORNEW       0x0005
+#define S3_NOT_CURXORNEW   0x0006
+#define S3_NEW             0x0007
+#define S3_NOTCURORNOTNEW  0x0008
+#define S3_CURORNOTNEW     0x0009
+#define S3_NOTCURORNEW     0x000a
+#define S3_CURORNEW        0x000b
+#define S3_CURANDNEW       0x000c
+#define S3_NOTCURANDNEW    0x000d
+#define S3_CURANDNOTNEW    0x000e
+#define S3_NOTCURANDNOTNEW 0x000f
+
+#define S3_CRTC_ADR    0x03d4
+#define S3_CRTC_DATA   0x03d5
+
+#define S3_REG_LOCK2 0x39
+#define S3_HGC_MODE  0x45
+
+#define S3_HWGC_ORGX_H 0x46
+#define S3_HWGC_ORGX_L 0x47
+#define S3_HWGC_ORGY_H 0x48
+#define S3_HWGC_ORGY_L 0x49
+#define S3_HWGC_DX     0x4e
+#define S3_HWGC_DY     0x4f
+
+
+#define S3_LAW_CTL 0x58
+
+#endif /* _VIDEO_S3BLIT_H */
diff --git a/include/video/sgivw.h b/include/video/sgivw.h
new file mode 100644
index 000000000000..55f2a7c024af
--- /dev/null
+++ b/include/video/sgivw.h
@@ -0,0 +1,682 @@
+/*
+ *  linux/drivers/video/sgivw.h -- SGI DBE frame buffer device header
+ *
+ *      Copyright (C) 1999 Silicon Graphics, Inc.
+ *      Jeffrey Newquist, newquist@engr.sgi.som
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef __SGIVWFB_H__
+#define __SGIVWFB_H__
+
+#define DBE_GETREG(reg, dest)		((dest) = DBE_REG_BASE->reg)
+#define DBE_SETREG(reg, src)		DBE_REG_BASE->reg = (src)
+#define DBE_IGETREG(reg, idx, dest)	((dest) = DBE_REG_BASE->reg[idx])
+#define DBE_ISETREG(reg, idx, src)	(DBE_REG_BASE->reg[idx] = (src))
+
+#define MASK(msb, lsb)          ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
+#define GET(v, msb, lsb)        ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
+#define SET(v, f, msb, lsb)     ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
+
+#define GET_DBE_FIELD(reg, field, v)        GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+#define SET_DBE_FIELD(reg, field, v, f)     SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+
+/* NOTE: All loads/stores must be 32 bits and uncached */
+
+#define DBE_REG_PHYS	0xd0000000
+#define DBE_REG_SIZE        0x01000000
+
+struct asregs {
+  volatile u32 ctrlstat;     /* 0x000000 general control */
+  volatile u32 dotclock;     /* 0x000004 dot clock PLL control */
+  volatile u32 i2c;          /* 0x000008 crt I2C control */
+  volatile u32 sysclk;       /* 0x00000c system clock PLL control */
+  volatile u32 i2cfp;        /* 0x000010 flat panel I2C control */
+  volatile u32 id;           /* 0x000014 device id/chip revision */
+  volatile u32 config;       /* 0x000018 power on configuration */
+  volatile u32 bist;         /* 0x00001c internal bist status */
+
+  char _pad0[ 0x010000 - 0x000020 ];
+
+  volatile u32 vt_xy;        /* 0x010000 current dot coords */
+  volatile u32 vt_xymax;     /* 0x010004 maximum dot coords */
+  volatile u32 vt_vsync;     /* 0x010008 vsync on/off */
+  volatile u32 vt_hsync;     /* 0x01000c hsync on/off */
+  volatile u32 vt_vblank;    /* 0x010010 vblank on/off */
+  volatile u32 vt_hblank;    /* 0x010014 hblank on/off */
+  volatile u32 vt_flags;     /* 0x010018 polarity of vt signals */
+  volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */
+  volatile u32 vt_intr01;    /* 0x010020 intr 0,1 y coords */
+  volatile u32 vt_intr23;    /* 0x010024 intr 2,3 y coords */
+  volatile u32 fp_hdrv;      /* 0x010028 flat panel hdrv on/off */
+  volatile u32 fp_vdrv;      /* 0x01002c flat panel vdrv on/off */
+  volatile u32 fp_de;        /* 0x010030 flat panel de on/off */
+  volatile u32 vt_hpixen;    /* 0x010034 intrnl horiz pixel on/off*/
+  volatile u32 vt_vpixen;    /* 0x010038 intrnl vert pixel on/off */
+  volatile u32 vt_hcmap;     /* 0x01003c cmap write (horiz) */
+  volatile u32 vt_vcmap;     /* 0x010040 cmap write (vert) */
+  volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */
+  volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */
+  volatile u32 vc_start_xy;  /* 0x01004c eol/f vc/xy reset val */
+
+  char _pad1[ 0x020000 - 0x010050 ];
+
+  volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */
+  volatile u32 ovr_inhwctrl;   /* 0x020004 overlay plane ctrl 1 */
+  volatile u32 ovr_control;    /* 0x020008 overlay plane ctrl 1 */
+
+  char _pad2[ 0x030000 - 0x02000C ];
+
+  volatile u32 frm_size_tile;  /* 0x030000 normal plane ctrl 0 */
+  volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */
+  volatile u32 frm_inhwctrl;   /* 0x030008 normal plane ctrl 2 */
+  volatile u32 frm_control;	   /* 0x03000C normal plane ctrl 3 */
+
+  char _pad3[ 0x040000 - 0x030010 ];
+
+  volatile u32 did_inhwctrl;   /* 0x040000 DID control */
+  volatile u32 did_control;    /* 0x040004 DID shadow */
+
+  char _pad4[ 0x048000 - 0x040008 ];
+
+  volatile u32 mode_regs[32];  /* 0x048000 - 0x04807c WID table */
+
+  char _pad5[ 0x050000 - 0x048080 ];
+
+  volatile u32 cmap[6144];     /* 0x050000 - 0x055ffc color map */
+
+  char _pad6[ 0x058000 - 0x056000 ];
+
+  volatile u32 cm_fifo;        /* 0x058000 color map fifo status */
+
+  char _pad7[ 0x060000 - 0x058004 ];
+
+  volatile u32 gmap[256];      /* 0x060000 - 0x0603fc gamma map */
+
+  char _pad8[ 0x068000 - 0x060400 ];
+
+  volatile u32 gmap10[1024];   /* 0x068000 - 0x068ffc gamma map */
+
+  char _pad9[ 0x070000 - 0x069000 ];
+
+  volatile u32 crs_pos;        /* 0x070000 cusror control 0 */
+  volatile u32 crs_ctl;        /* 0x070004 cusror control 1 */
+  volatile u32 crs_cmap[3];    /* 0x070008 - 0x070010 crs cmap */
+
+  char _pad10[ 0x078000 - 0x070014 ];
+
+  volatile u32 crs_glyph[64];  /* 0x078000 - 0x0780fc crs glyph */
+
+  char _pad11[ 0x080000 - 0x078100 ];
+
+  volatile u32 vc_0;           /* 0x080000 video capture crtl 0 */
+  volatile u32 vc_1;           /* 0x080004 video capture crtl 1 */
+  volatile u32 vc_2;           /* 0x080008 video capture crtl 2 */
+  volatile u32 vc_3;           /* 0x08000c video capture crtl 3 */
+  volatile u32 vc_4;           /* 0x080010 video capture crtl 3 */
+  volatile u32 vc_5;           /* 0x080014 video capture crtl 3 */
+  volatile u32 vc_6;           /* 0x080018 video capture crtl 3 */
+  volatile u32 vc_7;           /* 0x08001c video capture crtl 3 */
+  volatile u32 vc_8;           /* 0x08000c video capture crtl 3 */
+};
+
+/* Bit mask information */
+
+#define DBE_CTRLSTAT_CHIPID_MSB     3
+#define DBE_CTRLSTAT_CHIPID_LSB     0
+#define DBE_CTRLSTAT_SENSE_N_MSB    4
+#define DBE_CTRLSTAT_SENSE_N_LSB    4
+#define DBE_CTRLSTAT_PCLKSEL_MSB    29
+#define DBE_CTRLSTAT_PCLKSEL_LSB    28
+
+#define DBE_DOTCLK_M_MSB            7
+#define DBE_DOTCLK_M_LSB            0
+#define DBE_DOTCLK_N_MSB            13
+#define DBE_DOTCLK_N_LSB            8
+#define DBE_DOTCLK_P_MSB            15
+#define DBE_DOTCLK_P_LSB            14
+#define DBE_DOTCLK_RUN_MSB          20
+#define DBE_DOTCLK_RUN_LSB          20
+
+#define DBE_VT_XY_VT_FREEZE_MSB     31
+#define DBE_VT_XY_VT_FREEZE_LSB     31
+
+#define DBE_FP_VDRV_FP_VDRV_ON_MSB	23
+#define DBE_FP_VDRV_FP_VDRV_ON_LSB	12
+#define DBE_FP_VDRV_FP_VDRV_OFF_MSB	11
+#define DBE_FP_VDRV_FP_VDRV_OFF_LSB	0
+
+#define DBE_FP_HDRV_FP_HDRV_ON_MSB	23
+#define DBE_FP_HDRV_FP_HDRV_ON_LSB	12
+#define DBE_FP_HDRV_FP_HDRV_OFF_MSB	11
+#define DBE_FP_HDRV_FP_HDRV_OFF_LSB	0
+
+#define DBE_FP_DE_FP_DE_ON_MSB		23
+#define DBE_FP_DE_FP_DE_ON_LSB		12
+#define DBE_FP_DE_FP_DE_OFF_MSB		11
+#define DBE_FP_DE_FP_DE_OFF_LSB		0
+
+#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB        23
+#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB        12
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB       11
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB       0
+
+#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB        23
+#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB        12
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB       11
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB       0
+
+#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB        23
+#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB        12
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB       11
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB       0
+
+#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB        23
+#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB        12
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB       11
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB       0
+
+#define DBE_VT_FLAGS_VDRV_INVERT_MSB		0
+#define DBE_VT_FLAGS_VDRV_INVERT_LSB		0
+#define DBE_VT_FLAGS_HDRV_INVERT_MSB		2
+#define DBE_VT_FLAGS_HDRV_INVERT_LSB		2
+
+#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB        23
+#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB        12
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB       11
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB       0
+
+#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB        23
+#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB        12
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB       11
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB       0
+
+#define DBE_VT_XYMAX_VT_MAXX_MSB    11
+#define DBE_VT_XYMAX_VT_MAXX_LSB    0
+#define DBE_VT_XYMAX_VT_MAXY_MSB    23
+#define DBE_VT_XYMAX_VT_MAXY_LSB    12
+
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB      23
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB      12
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB     11
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB     0
+
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB      23
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB      12
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB     11
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB     0
+
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB  0
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB  0
+
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0
+
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB       13
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB       13
+
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB  0
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB  0
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB    31
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB    9
+#define DBE_FRM_CONTROL_FRM_LINEAR_MSB      1
+#define DBE_FRM_CONTROL_FRM_LINEAR_LSB      1
+
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0
+
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB        12
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB        5
+#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB       4
+#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB       0
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB     14
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB     13
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB        15
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB        15
+
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB        31
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB        16
+
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB  0
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB  0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0
+
+#define DBE_DID_START_XY_DID_STARTY_MSB     23
+#define DBE_DID_START_XY_DID_STARTY_LSB     12
+#define DBE_DID_START_XY_DID_STARTX_MSB     11
+#define DBE_DID_START_XY_DID_STARTX_LSB     0
+
+#define DBE_CRS_START_XY_CRS_STARTY_MSB     23
+#define DBE_CRS_START_XY_CRS_STARTY_LSB     12
+#define DBE_CRS_START_XY_CRS_STARTX_MSB     11
+#define DBE_CRS_START_XY_CRS_STARTX_LSB     0
+
+#define DBE_WID_TYP_MSB     4
+#define DBE_WID_TYP_LSB     2
+#define DBE_WID_BUF_MSB     1
+#define DBE_WID_BUF_LSB     0
+
+#define DBE_VC_START_XY_VC_STARTY_MSB       23
+#define DBE_VC_START_XY_VC_STARTY_LSB       12
+#define DBE_VC_START_XY_VC_STARTX_MSB       11
+#define DBE_VC_START_XY_VC_STARTX_LSB       0
+
+/* Constants */
+
+#define DBE_FRM_DEPTH_8     0
+#define DBE_FRM_DEPTH_16    1
+#define DBE_FRM_DEPTH_32    2
+
+#define DBE_CMODE_I8        0
+#define DBE_CMODE_I12       1
+#define DBE_CMODE_RG3B2     2
+#define DBE_CMODE_RGB4      3
+#define DBE_CMODE_ARGB5     4
+#define DBE_CMODE_RGB8      5
+#define DBE_CMODE_RGBA5     6
+#define DBE_CMODE_RGB10     7
+
+#define DBE_BMODE_BOTH      3
+
+#define DBE_CRS_MAGIC       54
+
+#define DBE_CLOCK_REF_KHZ	27000
+
+/* Config Register (DBE Only) Definitions */
+
+#define DBE_CONFIG_VDAC_ENABLE       0x00000001
+#define DBE_CONFIG_VDAC_GSYNC        0x00000002
+#define DBE_CONFIG_VDAC_PBLANK       0x00000004
+#define DBE_CONFIG_FPENABLE          0x00000008
+#define DBE_CONFIG_LENDIAN           0x00000020
+#define DBE_CONFIG_TILEHIST          0x00000040
+#define DBE_CONFIG_EXT_ADDR          0x00000080
+
+#define DBE_CONFIG_FBDEV        ( DBE_CONFIG_VDAC_ENABLE | \
+                                      DBE_CONFIG_VDAC_GSYNC  | \
+                                      DBE_CONFIG_VDAC_PBLANK | \
+                                      DBE_CONFIG_LENDIAN     | \
+                                      DBE_CONFIG_EXT_ADDR )
+
+/*
+ * Available Video Timings and Corresponding Indices
+ */
+
+typedef enum {
+  DBE_VT_640_480_60,
+
+  DBE_VT_800_600_60,
+  DBE_VT_800_600_75,
+  DBE_VT_800_600_120,
+
+  DBE_VT_1024_768_50,
+  DBE_VT_1024_768_60,
+  DBE_VT_1024_768_75,
+  DBE_VT_1024_768_85,
+  DBE_VT_1024_768_120,
+
+  DBE_VT_1280_1024_50,
+  DBE_VT_1280_1024_60,
+  DBE_VT_1280_1024_75,
+  DBE_VT_1280_1024_85,
+
+  DBE_VT_1600_1024_53,
+  DBE_VT_1600_1024_60,
+
+  DBE_VT_1600_1200_50,
+  DBE_VT_1600_1200_60,
+  DBE_VT_1600_1200_75,
+
+  DBE_VT_1920_1080_50,
+  DBE_VT_1920_1080_60,
+  DBE_VT_1920_1080_72,
+
+  DBE_VT_1920_1200_50,
+  DBE_VT_1920_1200_60,
+  DBE_VT_1920_1200_66,
+
+  DBE_VT_UNKNOWN
+} dbe_timing_t;
+
+
+
+/*
+ * Crime Video Timing Data Structure
+ */
+
+struct dbe_timing_info
+{
+  dbe_timing_t type;
+  int flags;				
+  short width;		    /* Monitor resolution		*/
+  short height;
+  int fields_sec;	    /* fields/sec  (Hz -3 dec. places */
+  int cfreq;		    /* pixel clock frequency (MHz -3 dec. places) */
+  short htotal;		    /* Horizontal total pixels	*/
+  short hblank_start;	    /* Horizontal blank start	*/
+  short hblank_end;	    /* Horizontal blank end		*/
+  short hsync_start;	    /* Horizontal sync start	*/
+  short hsync_end;	    /* Horizontal sync end		*/
+  short vtotal;		    /* Vertical total lines		*/
+  short vblank_start;	    /* Vertical blank start		*/
+  short vblank_end;	    /* Vertical blank end		*/
+  short vsync_start;	    /* Vertical sync start		*/
+  short vsync_end;	    /* Vertical sync end		*/
+  short pll_m;		    /* PLL M parameter		*/
+  short pll_n;		    /* PLL P parameter		*/
+  short pll_p;		    /* PLL N parameter		*/
+};
+
+/* Defines for dbe_vof_info_t flags */
+
+#define DBE_VOF_UNKNOWNMON    1
+#define DBE_VOF_STEREO        2
+#define DBE_VOF_DO_GENSYNC    4          /* enable incoming sync */
+#define DBE_VOF_SYNC_ON_GREEN 8          /* sync on green */
+#define DBE_VOF_FLATPANEL     0x1000     /* FLATPANEL Timing */
+#define DBE_VOF_MAGICKEY      0x2000     /* Backdoor key */
+
+/*
+ * DBE Timing Tables
+ */
+
+#ifdef INCLUDE_TIMING_TABLE_DATA
+struct dbe_timing_info dbeVTimings[] = {
+  {
+    DBE_VT_640_480_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,  	640,			480,		59940,			25175,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    800,	640,		    800,		656,	    	752,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    525,	480,		    525,		490,		    492,
+    /*	pll_m,	pll_n,			pll_p */
+    15,	    2,				3
+  },
+
+  {
+    DBE_VT_800_600_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    800,			600,		60317,			40000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1056,	800,		    1056,		840,		    968,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    628,	600,		    628,		601,		    605,
+    /*	pll_m,	pll_n,			pll_p */
+    3,	    1,				1
+  },
+
+  {
+    DBE_VT_800_600_75,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    800,		    600,		75000,		    49500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1056,	800,		    1056,		816,		    896,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    625,	600,		    625,		601,		    604,
+    /*	pll_m,	pll_n,		    pll_p */
+    11,	    3,		        1
+  },
+
+  {
+    DBE_VT_800_600_120,
+    /*	flags,					width,		height,			fields_sec,	    cfreq */
+    DBE_VOF_STEREO,	    800,		600,			119800,		    82978,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1040,	800,		    1040,		856,		    976,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    666,	600,		    666,		637,		    643,
+    /*	pll_m,	pll_n,		    pll_p */
+    31,	    5,		        1
+  },
+
+  {
+    DBE_VT_1024_768_50,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    1024,		    768,		50000,		    54163,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1344,	1024,		    1344,		1048,		    1184,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    806,	768,		    806,		771,		    777,
+    /*	pll_m,	pll_n,		    pll_p */
+    4,	    1,		        1
+  },
+
+  {
+    DBE_VT_1024_768_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		60004,			65000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1344,	1024,		    1344,		1048,		    1184,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    806,	768,		    806,		771,		    777,
+    /*	pll_m,	pll_n,			pll_p */
+    12,	    5,				0
+  },
+
+  {
+    DBE_VT_1024_768_75,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		75029,			78750,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1312,	1024,		    1312,		1040,		    1136,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    800,	768,		    800,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    29,	    5,				1
+  },
+
+  {
+    DBE_VT_1024_768_85,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		84997,			94500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1376,	1024,		    1376,		1072,		    1168,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    808,	768,		    808,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    7,	    2,				0
+  },
+
+  {
+    DBE_VT_1024_768_120,
+    /*	flags,					width,		height,			fields_sec,		cfreq */
+    DBE_VOF_STEREO,	    1024,		768,			119800,			133195,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1376,	1024,		    1376,		1072,		    1168,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    808,	768,		    808,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    5,	    1,				0
+  },
+
+  {
+    DBE_VT_1280_1024_50,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		50000,			89460,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1680,	1280,		    1680,		1360,		    1480,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1065,	1024,		    1065,		1027,		    1030,
+    /*	pll_m,	pll_n,			pll_p */
+    10,	    3,				0
+  },
+
+  {
+    DBE_VT_1280_1024_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		60020,			108000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1688,	1280,		    1688,		1328,		    1440,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1066,	1024,		    1066,		1025,		    1028,
+    /*	pll_m,	pll_n,			pll_p */
+    4,	    1,			    0
+  },
+
+  {
+    DBE_VT_1280_1024_75,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		75025,			135000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1688,	1280,		    1688,		1296,		    1440,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1066,	1024,		    1066,		1025,		    1028,
+    /*	pll_m,	pll_n,			pll_p */
+    5,	    1,				0
+  },
+
+  {
+    DBE_VT_1280_1024_85,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    1280,		    1024,		85024,		    157500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1728,	1280,		    1728,		1344,		    1504,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1072,	1024,		    1072,		1025,		    1028,
+    /*	pll_m,	pll_n,		    pll_p */
+    29,	    5,		        0
+  },
+
+  {
+    DBE_VT_1600_1024_53,
+    /* flags,	width,			height,		fields_sec,     cfreq */
+    DBE_VOF_FLATPANEL | DBE_VOF_MAGICKEY,
+    1600,			1024,		53000,			107447,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    1900,   1600,           1900,           1630,           1730,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1067,   1024,           1067,           1027,           1030,
+    /* pll_m,  pll_n,          pll_p */
+    4,      1,              0
+  },
+
+  {
+    DBE_VT_1600_1024_60,
+    /* flags,					width,          height,			fields_sec,     cfreq */
+    DBE_VOF_FLATPANEL,   1600,           1024,			60000,          106913,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    1670,   1600,           1670,           1630,           1650,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1067,   1024,           1067,           1027,           1030,
+    /* pll_m,  pll_n,          pll_p */
+    4,      1,              0
+  },
+
+  {
+    DBE_VT_1600_1200_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           50000,          130500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2088,   1600,           2088,           1644,           1764,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1205,           1211,
+    /* pll_m,  pll_n,          pll_p */
+    24,     5,              0
+  },
+
+  {
+    DBE_VT_1600_1200_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           59940,          162000,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2160,   1600,           2160,           1644,           1856,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1201,           1204,
+    /* pll_m,  pll_n,          pll_p */
+    6,		1,              0
+  },
+
+  {
+    DBE_VT_1600_1200_75,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           75000,          202500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2160,   1600,           2160,           1644,           1856,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1201,           1204,
+    /* pll_m,  pll_n,          pll_p */
+    15,		2,              0
+  },
+
+  {
+    DBE_VT_1920_1080_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           50000,          133200,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2368,   1920,           2368,           1952,           2096,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1125,   1080,           1125,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    5,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1080_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           59940,          159840,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2368,   1920,           2368,           1952,           2096,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1125,   1080,           1125,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    6,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1080_72,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           72000,          216023,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2560,   1920,           2560,           1968,           2184,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1172,   1080,           1172,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    8,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1200_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           50000,          161500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    6,      1,              0
+  },
+	
+  {
+    DBE_VT_1920_1200_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           59940,          193800,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    29,     4,              0
+  },
+
+  {
+    DBE_VT_1920_1200_66,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           66000,          213180,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    8,      1,              0
+  }
+};
+
+#define DBE_VT_SIZE  (sizeof(dbeVTimings)/sizeof(dbeVTimings[0]))
+#endif // INCLUDE_TIMING_TABLE_DATA
+
+#endif // ! __SGIVWFB_H__
diff --git a/include/video/sisfb.h b/include/video/sisfb.h
new file mode 100644
index 000000000000..136bf791643d
--- /dev/null
+++ b/include/video/sisfb.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the named License,
+ * or any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#ifndef _LINUX_SISFB
+#define _LINUX_SISFB
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/**********************************************/
+/*                   PUBLIC                   */
+/**********************************************/
+
+/* vbflags */
+#define CRT2_DEFAULT            0x00000001
+#define CRT2_LCD                0x00000002  /* TW: Never change the order of the CRT2_XXX entries */
+#define CRT2_TV                 0x00000004  /*     (see SISCycleCRT2Type())                       */
+#define CRT2_VGA                0x00000008
+#define TV_NTSC                 0x00000010
+#define TV_PAL                  0x00000020
+#define TV_HIVISION             0x00000040
+#define TV_YPBPR                0x00000080
+#define TV_AVIDEO               0x00000100
+#define TV_SVIDEO               0x00000200
+#define TV_SCART                0x00000400
+#define VB_CONEXANT		0x00000800	/* 661 series only */
+#define VB_TRUMPION		VB_CONEXANT	/* 300 series only */
+#define TV_PALM                 0x00001000
+#define TV_PALN                 0x00002000
+#define TV_NTSCJ		0x00001000
+#define VB_302ELV		0x00004000
+#define TV_CHSCART              0x00008000
+#define TV_CHYPBPR525I          0x00010000
+#define CRT1_VGA		0x00000000
+#define CRT1_LCDA		0x00020000
+#define VGA2_CONNECTED          0x00040000
+#define VB_DISPTYPE_CRT1	0x00080000  	/* CRT1 connected and used */
+#define VB_301                  0x00100000	/* Video bridge type */
+#define VB_301B                 0x00200000
+#define VB_302B                 0x00400000
+#define VB_30xBDH		0x00800000      /* 30xB DH version (w/o LCD support) */
+#define VB_LVDS                 0x01000000
+#define VB_CHRONTEL             0x02000000
+#define VB_301LV                0x04000000
+#define VB_302LV                0x08000000
+#define VB_301C			0x10000000
+#define VB_SINGLE_MODE          0x20000000   	/* CRT1 or CRT2; determined by DISPTYPE_CRTx */
+#define VB_MIRROR_MODE		0x40000000   	/* CRT1 + CRT2 identical (mirror mode) */
+#define VB_DUALVIEW_MODE	0x80000000   	/* CRT1 + CRT2 independent (dual head mode) */
+
+/* Aliases: */
+#define CRT2_ENABLE		(CRT2_LCD | CRT2_TV | CRT2_VGA)
+#define TV_STANDARD             (TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ)
+#define TV_INTERFACE            (TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I)
+
+/* Only if TV_YPBPR is set: */
+#define TV_YPBPR525I		TV_NTSC
+#define TV_YPBPR525P		TV_PAL
+#define TV_YPBPR750P		TV_PALM
+#define TV_YPBPR1080I		TV_PALN
+#define TV_YPBPRALL 		(TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I)
+
+#define VB_SISBRIDGE            (VB_301|VB_301B|VB_301C|VB_302B|VB_301LV|VB_302LV|VB_302ELV)
+#define VB_SISTVBRIDGE          (VB_301|VB_301B|VB_301C|VB_302B|VB_301LV|VB_302LV)
+#define VB_VIDEOBRIDGE		(VB_SISBRIDGE | VB_LVDS | VB_CHRONTEL | VB_CONEXANT)
+
+#define VB_DISPTYPE_DISP2	CRT2_ENABLE
+#define VB_DISPTYPE_CRT2	CRT2_ENABLE
+#define VB_DISPTYPE_DISP1	VB_DISPTYPE_CRT1
+#define VB_DISPMODE_SINGLE	VB_SINGLE_MODE
+#define VB_DISPMODE_MIRROR	VB_MIRROR_MODE
+#define VB_DISPMODE_DUAL	VB_DUALVIEW_MODE
+#define VB_DISPLAY_MODE       	(SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE)
+
+/* Structure argument for SISFB_GET_INFO ioctl  */
+typedef struct _SISFB_INFO sisfb_info, *psisfb_info;
+
+struct _SISFB_INFO {
+	__u32   sisfb_id;         	/* for identifying sisfb */
+#ifndef SISFB_ID
+#define SISFB_ID	  0x53495346    /* Identify myself with 'SISF' */
+#endif
+ 	__u32   chip_id;		/* PCI-ID of detected chip */
+	__u32   memory;			/* video memory in KB which sisfb manages */
+	__u32   heapstart;            	/* heap start (= sisfb "mem" argument) in KB */
+	__u8    fbvidmode;		/* current sisfb mode */
+
+	__u8    sisfb_version;
+	__u8    sisfb_revision;
+	__u8 	sisfb_patchlevel;
+
+	__u8 	sisfb_caps;		/* sisfb capabilities */
+
+	__u32	sisfb_tqlen;		/* turbo queue length (in KB) */
+
+	__u32 	sisfb_pcibus;      	/* The card's PCI ID */
+	__u32 	sisfb_pcislot;
+	__u32 	sisfb_pcifunc;
+
+	__u8 	sisfb_lcdpdc;		/* PanelDelayCompensation */
+
+	__u8 	sisfb_lcda;		/* Detected status of LCDA for low res/text modes */
+
+	__u32 	sisfb_vbflags;
+	__u32 	sisfb_currentvbflags;
+
+	__u32 	sisfb_scalelcd;
+	__u32 	sisfb_specialtiming;
+
+	__u8 	sisfb_haveemi;
+	__u8 	sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33;
+	__u8 	sisfb_haveemilcd;
+
+	__u8 	sisfb_lcdpdca;		/* PanelDelayCompensation for LCD-via-CRT1 */
+
+	__u16	sisfb_tvxpos, sisfb_tvypos;  /* Warning: Values + 32 ! */
+
+	__u8 	reserved[208]; 		/* for future use */
+};
+
+/* Addtional IOCTLs for communication sisfb <> X driver                */
+/* If changing this, vgatypes.h must also be changed (for X driver)    */
+
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define SISFB_GET_INFO_SIZE  	_IOR(0xF3,0x00,__u32)
+#define SISFB_GET_INFO	  	_IOR(0xF3,0x01,struct _SISFB_INFO)
+
+/* ioctrl to get current vertical retrace status */
+#define SISFB_GET_VBRSTATUS  	_IOR(0xF3,0x02,__u32)
+
+/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
+#define SISFB_GET_AUTOMAXIMIZE 	_IOR(0xF3,0x03,__u32)
+#define SISFB_SET_AUTOMAXIMIZE 	_IOW(0xF3,0x03,__u32)
+
+/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/
+#define SISFB_GET_TVPOSOFFSET   _IOR(0xF3,0x04,__u32)
+#define SISFB_SET_TVPOSOFFSET   _IOW(0xF3,0x04,__u32)
+
+/* ioctl for locking sisfb (no register access during lock) */
+/* As of now, only used to avoid register access during
+ * the ioctls listed above.
+ */
+#define SISFB_SET_LOCK  	_IOW(0xF3,0x06,__u32)
+
+/* more to come soon */
+
+/* ioctls 0xF3 up to 0x3F reserved for sisfb */
+
+/****************************************************************/
+/* The following are deprecated and should not be used anymore: */
+/****************************************************************/
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define SISFB_GET_INFO_OLD  	   _IOR('n',0xF8,__u32)
+/* ioctrl to get current vertical retrace status */
+#define SISFB_GET_VBRSTATUS_OLD	   _IOR('n',0xF9,__u32)
+/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
+#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32)
+#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32)
+/****************************************************************/
+/*               End of deprecated ioctl numbers                */
+/****************************************************************/
+
+/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */
+struct sis_memreq {
+	__u32 	offset;
+	__u32 	size;
+};
+
+/**********************************************/
+/*                  PRIVATE                   */
+/*         (for IN-KERNEL usage only)         */
+/**********************************************/
+
+#ifdef __KERNEL__
+#define	UNKNOWN_VGA  0
+#define	SIS_300_VGA  1
+#define	SIS_315_VGA  2
+
+extern void sis_malloc(struct sis_memreq *req);
+extern void sis_free(u32 base);
+#endif
+
+#endif
diff --git a/include/video/sstfb.h b/include/video/sstfb.h
new file mode 100644
index 000000000000..0d77b5205372
--- /dev/null
+++ b/include/video/sstfb.h
@@ -0,0 +1,354 @@
+/*
+ * linux/drivers/video/sstfb.h -- voodoo graphics frame buffer
+ *
+ *     Copyright (c) 2000,2001 Ghozlane Toumi <gtoumi@messel.emse.fr>
+ *
+ *     Created 28 Aug 2001 by Ghozlane Toumi
+ */
+
+
+#ifndef _SSTFB_H_
+#define _SSTFB_H_
+
+/*
+ *
+ *  Debug Stuff
+ *
+ */
+
+#ifdef SST_DEBUG
+#  define dprintk(X...)		printk("sstfb: " X)
+#  define SST_DEBUG_REG  1
+#  define SST_DEBUG_FUNC 1
+#  define SST_DEBUG_VAR  1
+#else
+#  define dprintk(X...)
+#  define SST_DEBUG_REG  0
+#  define SST_DEBUG_FUNC 0
+#  define SST_DEBUG_VAR  0
+#endif
+
+#if (SST_DEBUG_REG > 0)
+#  define r_dprintk(X...)	dprintk(X)
+#else
+#  define r_dprintk(X...)
+#endif
+#if (SST_DEBUG_REG > 1)
+#  define r_ddprintk(X...)	dprintk(" " X)
+#else
+#  define r_ddprintk(X...)
+#endif
+
+#if (SST_DEBUG_FUNC > 0)
+#  define f_dprintk(X...)	dprintk(X)
+#else
+#  define f_dprintk(X...)
+#endif
+#if (SST_DEBUG_FUNC > 1)
+#  define f_ddprintk(X...)	dprintk(" " X)
+#else
+#  define f_ddprintk(X...)
+#endif
+#if (SST_DEBUG_FUNC > 2)
+#  define f_dddprintk(X...)	dprintk(" " X)
+#else
+#  define f_dddprintk(X...)
+#endif
+
+#if (SST_DEBUG_VAR > 0)
+#  define v_dprintk(X...)	dprintk(X)
+#  define print_var(V, X...)	\
+   {				\
+     dprintk(X);		\
+     printk(" :\n");		\
+     sst_dbg_print_var(V);	\
+   }
+#else
+#  define v_dprintk(X...)
+#  define print_var(X,Y...)
+#endif
+
+#define eprintk(X...)	printk(KERN_ERR "sstfb: " X)
+#define iprintk(X...)	printk(KERN_INFO "sstfb: " X)
+#define wprintk(X...)	printk(KERN_WARNING "sstfb: " X)
+
+#define BIT(x)		(1ul<<(x))
+#define POW2(x)		(1ul<<(x))
+
+/*
+ *
+ *  Const
+ *
+ */
+
+/* pci stuff */
+#define PCI_INIT_ENABLE		0x40
+#  define PCI_EN_INIT_WR	  BIT(0)
+#  define PCI_EN_FIFO_WR	  BIT(1)
+#  define PCI_REMAP_DAC		  BIT(2)
+#define PCI_VCLK_ENABLE		0xc0	/* enable video */
+#define PCI_VCLK_DISABLE	0xe0
+
+/* register offsets from memBaseAddr */
+#define STATUS			0x0000
+#  define STATUS_FBI_BUSY	  BIT(7)
+#define FBZMODE			0x0110
+#  define EN_CLIPPING		  BIT(0)	/* enable clipping */
+#  define EN_RGB_WRITE		  BIT(9)	/* enable writes to rgb area */
+#  define EN_ALPHA_WRITE	  BIT(10)
+#  define ENGINE_INVERT_Y	  BIT(17)	/* invert Y origin (pipe) */
+#define LFBMODE			0x0114
+#  define LFB_565		  0		/* bits 3:0 .16 bits RGB */
+#  define LFB_888		  4		/* 24 bits RGB */
+#  define LFB_8888		  5		/* 32 bits ARGB */
+#  define WR_BUFF_FRONT		  0		/* write buf select (front) */
+#  define WR_BUFF_BACK		  (1 << 4)	/* back */
+#  define RD_BUFF_FRONT		  0		/* read buff select (front) */
+#  define RD_BUFF_BACK		  (1 << 6)	/* back */
+#  define EN_PXL_PIPELINE	  BIT(8)	/* pixel pipeline (clip..)*/
+#  define LFB_WORD_SWIZZLE_WR	  BIT(11)	/* enable write-wordswap (big-endian) */
+#  define LFB_BYTE_SWIZZLE_WR	  BIT(12)	/* enable write-byteswap (big-endian) */
+#  define LFB_INVERT_Y		  BIT(13)	/* invert Y origin (LFB) */
+#  define LFB_WORD_SWIZZLE_RD	  BIT(15)	/* enable read-wordswap (big-endian) */
+#  define LFB_BYTE_SWIZZLE_RD	  BIT(16)	/* enable read-byteswap (big-endian) */
+#define CLIP_LEFT_RIGHT		0x0118
+#define CLIP_LOWY_HIGHY		0x011c
+#define NOPCMD			0x0120
+#define FASTFILLCMD		0x0124
+#define SWAPBUFFCMD		0x0128
+#define FBIINIT4		0x0200		/* misc controls */
+#  define FAST_PCI_READS	  0		/* 1 waitstate */
+#  define SLOW_PCI_READS	  BIT(0)	/* 2 ws */
+#  define LFB_READ_AHEAD	  BIT(1)
+#define BACKPORCH		0x0208
+#define VIDEODIMENSIONS		0x020c
+#define FBIINIT0		0x0210		/* misc+fifo  controls */
+#  define EN_VGA_PASSTHROUGH	  BIT(0)
+#  define FBI_RESET		  BIT(1)
+#  define FIFO_RESET		  BIT(2)
+#define FBIINIT1		0x0214		/* PCI + video controls */
+#  define VIDEO_MASK		  0x8080010f	/* masks video related bits V1+V2*/
+#  define FAST_PCI_WRITES	  0		/* 0 ws */
+#  define SLOW_PCI_WRITES	  BIT(1)	/* 1 ws */
+#  define EN_LFB_READ		  BIT(3)
+#  define TILES_IN_X_SHIFT	  4
+#  define VIDEO_RESET		  BIT(8)
+#  define EN_BLANKING		  BIT(12)
+#  define EN_DATA_OE		  BIT(13)
+#  define EN_BLANK_OE		  BIT(14)
+#  define EN_HVSYNC_OE		  BIT(15)
+#  define EN_DCLK_OE		  BIT(16)
+#  define SEL_INPUT_VCLK_2X	  0		/* bit 17 */
+#  define SEL_INPUT_VCLK_SLAVE	  BIT(17)
+#  define SEL_SOURCE_VCLK_SLAVE	  0		/* bits 21:20 */
+#  define SEL_SOURCE_VCLK_2X_DIV2 (0x01 << 20)
+#  define SEL_SOURCE_VCLK_2X_SEL  (0x02 << 20)
+#  define EN_24BPP		  BIT(22)
+#  define TILES_IN_X_MSB_SHIFT	  24		/* v2 */
+#  define VCLK_2X_SEL_DEL_SHIFT	  27		/* vclk out delay 0,4,6,8ns */
+#  define VCLK_DEL_SHIFT	  29		/* vclk in delay */
+#define FBIINIT2		0x0218		/* Dram controls */
+#  define EN_FAST_RAS_READ	  BIT(5)
+#  define EN_DRAM_OE		  BIT(6)
+#  define EN_FAST_RD_AHEAD_WR	  BIT(7)
+#  define VIDEO_OFFSET_SHIFT	  11		/* unit: #rows tile 64x16/2 */
+#  define SWAP_DACVSYNC		  0
+#  define SWAP_DACDATA0		  (1 << 9)
+#  define SWAP_FIFO_STALL	  (2 << 9)
+#  define EN_RD_AHEAD_FIFO	  BIT(21)
+#  define EN_DRAM_REFRESH	  BIT(22)
+#  define DRAM_REFRESH_16	  (0x30 << 23)	/* dram 16 ms */
+#define DAC_READ		FBIINIT2	/* in remap mode */
+#define FBIINIT3		0x021c		/* fbi controls */
+#  define DISABLE_TEXTURE	  BIT(6)
+#  define Y_SWAP_ORIGIN_SHIFT	  22		/* Y swap substraction value */
+#define HSYNC			0x0220
+#define VSYNC			0x0224
+#define DAC_DATA		0x022c
+#  define DAC_READ_CMD		  BIT(11)	/* set read dacreg mode */
+#define FBIINIT5		0x0244		/* v2 specific */
+#  define FBIINIT5_MASK		  0xfa40ffff    /* mask video bits*/
+#  define HDOUBLESCAN		  BIT(20)
+#  define VDOUBLESCAN		  BIT(21)
+#  define HSYNC_HIGH 		  BIT(23)
+#  define VSYNC_HIGH 		  BIT(24)
+#  define INTERLACE		  BIT(26)
+#define FBIINIT6		0x0248		/* v2 specific */
+#  define TILES_IN_X_LSB_SHIFT	  30		/* v2 */
+#define FBIINIT7		0x024c		/* v2 specific */
+
+#define BLTSRCBASEADDR		0x02c0	/* BitBLT Source base address */
+#define BLTDSTBASEADDR		0x02c4	/* BitBLT Destination base address */
+#define BLTXYSTRIDES		0x02c8	/* BitBLT Source and Destination strides */
+#define BLTSRCCHROMARANGE	0x02cc	/* BitBLT Source Chroma key range */
+#define BLTDSTCHROMARANGE	0x02d0	/* BitBLT Destination Chroma key range */
+#define BLTCLIPX		0x02d4	/* BitBLT Min/Max X clip values */
+#define BLTCLIPY		0x02d8	/* BitBLT Min/Max Y clip values */
+#define BLTSRCXY		0x02e0	/* BitBLT Source starting XY coordinates */
+#define BLTDSTXY		0x02e4	/* BitBLT Destination starting XY coordinates */
+#define BLTSIZE			0x02e8	/* BitBLT width and height */
+#define BLTROP			0x02ec	/* BitBLT Raster operations */
+#  define BLTROP_COPY		  0x0cccc
+#  define BLTROP_INVERT		  0x05555
+#  define BLTROP_XOR		  0x06666
+#define BLTCOLOR		0x02f0	/* BitBLT and foreground background colors */
+#define BLTCOMMAND		0x02f8	/* BitBLT command mode (v2 specific) */
+# define BLT_SCR2SCR_BITBLT	  0	  /* Screen-to-Screen BitBLT */
+# define BLT_CPU2SCR_BITBLT	  1	  /* CPU-to-screen BitBLT */
+# define BLT_RECFILL_BITBLT	  2	  /* BitBLT Rectangle Fill */
+# define BLT_16BPP_FMT		  2	  /* 16 BPP (5-6-5 RGB) */
+#define BLTDATA			0x02fc	/* BitBLT data for CPU-to-Screen BitBLTs */
+#  define LAUNCH_BITBLT		  BIT(31) /* Launch BitBLT in BltCommand, bltDstXY or bltSize */
+
+/* Dac Registers */
+#define DACREG_WMA		0x0	/* pixel write mode address */
+#define DACREG_LUT		0x01	/* color value */
+#define DACREG_RMR		0x02	/* pixel mask */
+#define DACREG_RMA		0x03	/* pixel read mode address */
+/*Dac registers in indexed mode (TI, ATT dacs) */
+#define DACREG_ADDR_I		DACREG_WMA
+#define DACREG_DATA_I		DACREG_RMR
+#define DACREG_RMR_I		0x00
+#define DACREG_CR0_I		0x01
+#  define DACREG_CR0_EN_INDEXED	  BIT(0)	/* enable indexec mode */
+#  define DACREG_CR0_8BIT	  BIT(1)	/* set dac to 8 bits/read */
+#  define DACREG_CR0_PWDOWN	  BIT(3)	/* powerdown dac */
+#  define DACREG_CR0_16BPP	  0x30		/* mode 3 */
+#  define DACREG_CR0_24BPP	  0x50		/* mode 5 */
+#define	DACREG_CR1_I		0x05
+#define DACREG_CC_I		0x06
+#  define DACREG_CC_CLKA	  BIT(7)	/* clk A controled by regs */
+#  define DACREG_CC_CLKA_C	  (2<<4)	/* clk A uses reg C */
+#  define DACREG_CC_CLKB	  BIT(3)	/* clk B controled by regs */
+#  define DACREG_CC_CLKB_D	  3		/* clkB uses reg D */
+#define DACREG_AC0_I		0x48		/* clock A reg C */
+#define DACREG_AC1_I		0x49
+#define DACREG_BD0_I		0x6c		/* clock B reg D */
+#define DACREG_BD1_I		0x6d
+
+/* identification constants */
+#define DACREG_MIR_TI		0x97
+#define DACREG_DIR_TI		0x09
+#define DACREG_MIR_ATT		0x84
+#define DACREG_DIR_ATT		0x09
+/* ics dac specific registers */
+#define DACREG_ICS_PLLWMA	0x04	/* PLL write mode address */
+#define DACREG_ICS_PLLDATA	0x05	/* PLL data /parameter */
+#define DACREG_ICS_CMD		0x06	/* command */
+#  define DACREG_ICS_CMD_16BPP	  0x50	/* ics color mode 6 (16bpp bypass)*/
+#  define DACREG_ICS_CMD_24BPP	  0x70	/* ics color mode 7 (24bpp bypass)*/
+#  define DACREG_ICS_CMD_PWDOWN BIT(0)	/* powerdown dac */
+#define DACREG_ICS_PLLRMA	0x07	/* PLL read mode address */
+/*
+ * pll parameter register:
+ * indexed : write addr to PLLWMA, write data in PLLDATA.
+ * for reads use PLLRMA .
+ * 8 freq registers (0-7) for video clock (CLK0)
+ * 2 freq registers (a-b) for graphic clock (CLK1)
+ */
+#define DACREG_ICS_PLL_CLK0_1_INI 0x55	/* initial pll M value for freq f1  */
+#define DACREG_ICS_PLL_CLK0_7_INI 0x71	/* f7 */
+#define DACREG_ICS_PLL_CLK1_B_INI 0x79	/* fb */
+#define DACREG_ICS_PLL_CTRL	0x0e
+#  define DACREG_ICS_CLK0	  BIT(5)
+#  define DACREG_ICS_CLK0_0	  0
+#  define DACREG_ICS_CLK1_A	  0	/* bit4 */
+
+/* sst default init registers */
+#define FBIINIT0_DEFAULT EN_VGA_PASSTHROUGH
+
+#define FBIINIT1_DEFAULT 	\
+	(			\
+	  FAST_PCI_WRITES	\
+/*	  SLOW_PCI_WRITES*/	\
+	| VIDEO_RESET		\
+	| 10 << TILES_IN_X_SHIFT\
+	| SEL_SOURCE_VCLK_2X_SEL\
+	| EN_LFB_READ		\
+	)
+
+#define FBIINIT2_DEFAULT	\
+	(			\
+	 SWAP_DACVSYNC		\
+	| EN_DRAM_OE		\
+	| DRAM_REFRESH_16	\
+	| EN_DRAM_REFRESH	\
+	| EN_FAST_RAS_READ	\
+	| EN_RD_AHEAD_FIFO	\
+	| EN_FAST_RD_AHEAD_WR	\
+	)
+
+#define FBIINIT3_DEFAULT 	\
+	( DISABLE_TEXTURE )
+
+#define FBIINIT4_DEFAULT	\
+	(			\
+	  FAST_PCI_READS	\
+/*	  SLOW_PCI_READS*/	\
+	| LFB_READ_AHEAD	\
+	)
+/* Careful with this one : writing back the data just read will trash the DAC
+   reading some fields give logic value on pins, but setting this field will
+   set the source signal driving the pin. conclusion : just use the default
+   as a base before writing back .
+*/
+#define FBIINIT6_DEFAULT	(0x0)
+
+/*
+ *
+ * Misc Const
+ *
+ */
+
+/* used to know witch clock to set */
+enum {
+	VID_CLOCK=0,
+	GFX_CLOCK=1,
+};
+
+/* freq max */
+#define DAC_FREF	14318	/* DAC reference freq (Khz) */
+#define VCO_MAX		260000
+
+/*
+ *  driver structs
+ */
+
+struct pll_timing {
+	unsigned int m;
+	unsigned int n;
+	unsigned int p;
+};
+
+struct dac_switch {
+	char * name;
+	int (*detect) (struct fb_info *info);
+	int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock);
+	void (*set_vidmod) (struct fb_info *info, const int bpp);
+};
+
+struct sst_spec {
+	char * name;
+	int default_gfx_clock;	/* 50000 for voodoo1, 75000 for voodoo2 */
+	int max_gfxclk; 	/* ! in Mhz ie 60 for voodoo 1 */
+};
+
+struct sstfb_par {
+	unsigned int yDim;
+	unsigned int hSyncOn;	/* hsync_len */
+	unsigned int hSyncOff;	/* left_margin + xres + right_margin */
+	unsigned int hBackPorch;/* left_margin */
+	unsigned int vSyncOn;
+	unsigned int vSyncOff;
+	unsigned int vBackPorch;
+	struct pll_timing pll;
+	unsigned int tiles_in_X;/* num of tiles in X res */
+	u8 __iomem *mmio_vbase;
+	struct dac_switch 	dac_sw;	/* dac specific functions */
+	struct pci_dev		*dev;
+	int	type;
+	u8	revision;
+	int	gfx_clock;	/* status */
+};
+
+#endif /* _SSTFB_H_ */
diff --git a/include/video/tdfx.h b/include/video/tdfx.h
new file mode 100644
index 000000000000..a896e4442060
--- /dev/null
+++ b/include/video/tdfx.h
@@ -0,0 +1,192 @@
+#ifndef _TDFX_H
+#define _TDFX_H
+
+/* membase0 register offsets */
+#define STATUS          0x00
+#define PCIINIT0        0x04
+#define SIPMONITOR      0x08
+#define LFBMEMORYCONFIG 0x0c
+#define MISCINIT0       0x10
+#define MISCINIT1       0x14
+#define DRAMINIT0       0x18
+#define DRAMINIT1       0x1c
+#define AGPINIT         0x20
+#define TMUGBEINIT      0x24
+#define VGAINIT0        0x28
+#define VGAINIT1        0x2c
+#define DRAMCOMMAND     0x30
+#define DRAMDATA        0x34
+/* reserved             0x38 */
+/* reserved             0x3c */
+#define PLLCTRL0        0x40
+#define PLLCTRL1        0x44
+#define PLLCTRL2        0x48
+#define DACMODE         0x4c
+#define DACADDR         0x50
+#define DACDATA         0x54
+#define RGBMAXDELTA     0x58
+#define VIDPROCCFG      0x5c
+#define HWCURPATADDR    0x60
+#define HWCURLOC        0x64
+#define HWCURC0         0x68
+#define HWCURC1         0x6c
+#define VIDINFORMAT     0x70
+#define VIDINSTATUS     0x74
+#define VIDSERPARPORT   0x78
+#define VIDINXDELTA     0x7c
+#define VIDININITERR    0x80
+#define VIDINYDELTA     0x84
+#define VIDPIXBUFTHOLD  0x88
+#define VIDCHRMIN       0x8c
+#define VIDCHRMAX       0x90
+#define VIDCURLIN       0x94
+#define VIDSCREENSIZE   0x98
+#define VIDOVRSTARTCRD  0x9c
+#define VIDOVRENDCRD    0xa0
+#define VIDOVRDUDX      0xa4
+#define VIDOVRDUDXOFF   0xa8
+#define VIDOVRDVDY      0xac
+/*  ... */
+#define VIDOVRDVDYOFF   0xe0
+#define VIDDESKSTART    0xe4
+#define VIDDESKSTRIDE   0xe8
+#define VIDINADDR0      0xec
+#define VIDINADDR1      0xf0
+#define VIDINADDR2      0xf4
+#define VIDINSTRIDE     0xf8
+#define VIDCUROVRSTART  0xfc
+
+#define INTCTRL         (0x00100000 + 0x04)
+#define CLIP0MIN        (0x00100000 + 0x08)
+#define CLIP0MAX        (0x00100000 + 0x0c)
+#define DSTBASE         (0x00100000 + 0x10)
+#define DSTFORMAT       (0x00100000 + 0x14)
+#define SRCBASE         (0x00100000 + 0x34)
+#define COMMANDEXTRA_2D (0x00100000 + 0x38)
+#define CLIP1MIN        (0x00100000 + 0x4c)
+#define CLIP1MAX        (0x00100000 + 0x50)
+#define SRCFORMAT       (0x00100000 + 0x54)
+#define SRCSIZE         (0x00100000 + 0x58)
+#define SRCXY           (0x00100000 + 0x5c)
+#define COLORBACK       (0x00100000 + 0x60)
+#define COLORFORE       (0x00100000 + 0x64)
+#define DSTSIZE         (0x00100000 + 0x68)
+#define DSTXY           (0x00100000 + 0x6c)
+#define COMMAND_2D      (0x00100000 + 0x70)
+#define LAUNCH_2D       (0x00100000 + 0x80)
+
+#define COMMAND_3D      (0x00200000 + 0x120)
+
+/* register bitfields (not all, only as needed) */
+
+#define BIT(x) (1UL << (x))
+
+/* COMMAND_2D reg. values */
+#define TDFX_ROP_COPY        0xcc     // src
+#define TDFX_ROP_INVERT      0x55     // NOT dst
+#define TDFX_ROP_XOR         0x66     // src XOR dst
+
+#define AUTOINC_DSTX                    BIT(10)
+#define AUTOINC_DSTY                    BIT(11)
+#define COMMAND_2D_FILLRECT             0x05
+#define COMMAND_2D_S2S_BITBLT           0x01      // screen to screen
+#define COMMAND_2D_H2S_BITBLT           0x03       // host to screen
+
+#define COMMAND_3D_NOP                  0x00
+#define STATUS_RETRACE                  BIT(6)
+#define STATUS_BUSY                     BIT(9)
+#define MISCINIT1_CLUT_INV              BIT(0)
+#define MISCINIT1_2DBLOCK_DIS           BIT(15)
+#define DRAMINIT0_SGRAM_NUM             BIT(26)
+#define DRAMINIT0_SGRAM_TYPE            BIT(27)
+#define DRAMINIT1_MEM_SDRAM             BIT(30)
+#define VGAINIT0_VGA_DISABLE            BIT(0)
+#define VGAINIT0_EXT_TIMING             BIT(1)
+#define VGAINIT0_8BIT_DAC               BIT(2)
+#define VGAINIT0_EXT_ENABLE             BIT(6)
+#define VGAINIT0_WAKEUP_3C3             BIT(8)
+#define VGAINIT0_LEGACY_DISABLE         BIT(9)
+#define VGAINIT0_ALT_READBACK           BIT(10)
+#define VGAINIT0_FAST_BLINK             BIT(11)
+#define VGAINIT0_EXTSHIFTOUT            BIT(12)
+#define VGAINIT0_DECODE_3C6             BIT(13)
+#define VGAINIT0_SGRAM_HBLANK_DISABLE   BIT(22)
+#define VGAINIT1_MASK                   0x1fffff
+#define VIDCFG_VIDPROC_ENABLE           BIT(0)
+#define VIDCFG_CURS_X11                 BIT(1)
+#define VIDCFG_INTERLACE                BIT(3)
+#define VIDCFG_HALF_MODE                BIT(4)
+#define VIDCFG_DESK_ENABLE              BIT(7)
+#define VIDCFG_CLUT_BYPASS              BIT(10)
+#define VIDCFG_2X                       BIT(26)
+#define VIDCFG_HWCURSOR_ENABLE          BIT(27)
+#define VIDCFG_PIXFMT_SHIFT             18
+#define DACMODE_2X                      BIT(0)
+
+/* VGA rubbish, need to change this for multihead support */
+#define MISC_W  0x3c2
+#define MISC_R  0x3cc
+#define SEQ_I   0x3c4
+#define SEQ_D   0x3c5
+#define CRT_I   0x3d4
+#define CRT_D   0x3d5
+#define ATT_IW  0x3c0
+#define IS1_R   0x3da
+#define GRA_I   0x3ce
+#define GRA_D   0x3cf
+
+#ifdef __KERNEL__
+
+struct banshee_reg {
+  /* VGA rubbish */
+  unsigned char att[21];
+  unsigned char crt[25];
+  unsigned char gra[ 9];
+  unsigned char misc[1];
+  unsigned char seq[ 5];
+
+  /* Banshee extensions */
+  unsigned char ext[2];
+  unsigned long vidcfg;
+  unsigned long vidpll;
+  unsigned long mempll;
+  unsigned long gfxpll;
+  unsigned long dacmode;
+  unsigned long vgainit0;
+  unsigned long vgainit1;
+  unsigned long screensize;
+  unsigned long stride;
+  unsigned long cursloc;
+  unsigned long curspataddr;
+  unsigned long cursc0;
+  unsigned long cursc1;
+  unsigned long startaddr;
+  unsigned long clip0min;
+  unsigned long clip0max;
+  unsigned long clip1min;
+  unsigned long clip1max;
+  unsigned long srcbase;
+  unsigned long dstbase;
+  unsigned long miscinit0;	
+};
+
+struct tdfx_par {
+  u32 max_pixclock;
+
+  void __iomem *regbase_virt;
+  unsigned long iobase;
+  u32 baseline;
+
+  struct {
+     int w,u,d;
+     unsigned long enable,disable;
+     struct timer_list timer;
+  } hwcursor; 
+
+  spinlock_t DAClock;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _TDFX_H */
+
diff --git a/include/video/tgafb.h b/include/video/tgafb.h
new file mode 100644
index 000000000000..be2b3e94e251
--- /dev/null
+++ b/include/video/tgafb.h
@@ -0,0 +1,238 @@
+/*
+ *  linux/drivers/video/tgafb.h -- DEC 21030 TGA frame buffer device
+ *
+ *  	Copyright (C) 1999,2000 Martin Lucina, Tom Zerucha
+ *  
+ *  $Id: tgafb.h,v 1.4.2.3 2000/04/04 06:44:56 mato Exp $
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef TGAFB_H
+#define TGAFB_H
+
+/*
+ * TGA hardware description (minimal)
+ */
+
+#define TGA_TYPE_8PLANE			0
+#define TGA_TYPE_24PLANE		1
+#define TGA_TYPE_24PLUSZ		3
+
+/*
+ * Offsets within Memory Space
+ */
+
+#define	TGA_ROM_OFFSET			0x0000000
+#define	TGA_REGS_OFFSET			0x0100000
+#define	TGA_8PLANE_FB_OFFSET		0x0200000
+#define	TGA_24PLANE_FB_OFFSET		0x0804000
+#define	TGA_24PLUSZ_FB_OFFSET		0x1004000
+
+#define TGA_FOREGROUND_REG		0x0020
+#define TGA_BACKGROUND_REG		0x0024
+#define	TGA_PLANEMASK_REG		0x0028
+#define TGA_PIXELMASK_ONESHOT_REG	0x002c
+#define	TGA_MODE_REG			0x0030
+#define	TGA_RASTEROP_REG		0x0034
+#define	TGA_PIXELSHIFT_REG		0x0038
+#define	TGA_DEEP_REG			0x0050
+#define	TGA_PIXELMASK_REG		0x005c
+#define	TGA_CURSOR_BASE_REG		0x0060
+#define	TGA_HORIZ_REG			0x0064
+#define	TGA_VERT_REG			0x0068
+#define	TGA_BASE_ADDR_REG		0x006c
+#define	TGA_VALID_REG			0x0070
+#define	TGA_CURSOR_XY_REG		0x0074
+#define	TGA_INTR_STAT_REG		0x007c
+#define TGA_DATA_REG			0x0080
+#define	TGA_RAMDAC_SETUP_REG		0x00c0
+#define	TGA_BLOCK_COLOR0_REG		0x0140
+#define	TGA_BLOCK_COLOR1_REG		0x0144
+#define	TGA_BLOCK_COLOR2_REG		0x0148
+#define	TGA_BLOCK_COLOR3_REG		0x014c
+#define	TGA_BLOCK_COLOR4_REG		0x0150
+#define	TGA_BLOCK_COLOR5_REG		0x0154
+#define	TGA_BLOCK_COLOR6_REG		0x0158
+#define	TGA_BLOCK_COLOR7_REG		0x015c
+#define TGA_COPY64_SRC			0x0160
+#define TGA_COPY64_DST			0x0164
+#define	TGA_CLOCK_REG			0x01e8
+#define	TGA_RAMDAC_REG			0x01f0
+#define	TGA_CMD_STAT_REG		0x01f8
+
+
+/* 
+ * Useful defines for managing the registers
+ */
+
+#define TGA_HORIZ_ODD			0x80000000
+#define TGA_HORIZ_POLARITY		0x40000000
+#define TGA_HORIZ_ACT_MSB		0x30000000
+#define TGA_HORIZ_BP			0x0fe00000
+#define TGA_HORIZ_SYNC			0x001fc000
+#define TGA_HORIZ_FP			0x00007c00
+#define TGA_HORIZ_ACT_LSB		0x000001ff
+
+#define TGA_VERT_SE			0x80000000
+#define TGA_VERT_POLARITY		0x40000000
+#define TGA_VERT_RESERVED		0x30000000
+#define TGA_VERT_BP			0x0fc00000
+#define TGA_VERT_SYNC			0x003f0000
+#define TGA_VERT_FP			0x0000f800
+#define TGA_VERT_ACTIVE			0x000007ff
+
+#define TGA_VALID_VIDEO			0x01
+#define TGA_VALID_BLANK			0x02
+#define TGA_VALID_CURSOR		0x04
+
+#define TGA_MODE_SBM_8BPP		0x000
+#define TGA_MODE_SBM_24BPP		0x300
+
+#define TGA_MODE_SIMPLE			0x00
+#define TGA_MODE_SIMPLEZ		0x10
+#define TGA_MODE_OPAQUE_STIPPLE		0x01
+#define TGA_MODE_OPAQUE_FILL		0x21
+#define TGA_MODE_TRANSPARENT_STIPPLE	0x03
+#define TGA_MODE_TRANSPARENT_FILL	0x23
+#define TGA_MODE_BLOCK_STIPPLE		0x0d
+#define TGA_MODE_BLOCK_FILL		0x2d
+#define TGA_MODE_COPY			0x07
+#define TGA_MODE_DMA_READ_COPY_ND	0x17
+#define TGA_MODE_DMA_READ_COPY_D	0x37
+#define TGA_MODE_DMA_WRITE_COPY		0x1f
+
+
+/*
+ * Useful defines for managing the ICS1562 PLL clock
+ */
+
+#define TGA_PLL_BASE_FREQ 		14318		/* .18 */
+#define TGA_PLL_MAX_FREQ 		230000
+
+
+/*
+ * Useful defines for managing the BT485 on the 8-plane TGA
+ */
+
+#define	BT485_READ_BIT			0x01
+#define	BT485_WRITE_BIT			0x00
+
+#define	BT485_ADDR_PAL_WRITE		0x00
+#define	BT485_DATA_PAL			0x02
+#define	BT485_PIXEL_MASK		0x04
+#define	BT485_ADDR_PAL_READ		0x06
+#define	BT485_ADDR_CUR_WRITE		0x08
+#define	BT485_DATA_CUR			0x0a
+#define	BT485_CMD_0			0x0c
+#define	BT485_ADDR_CUR_READ		0x0e
+#define	BT485_CMD_1			0x10
+#define	BT485_CMD_2			0x12
+#define	BT485_STATUS			0x14
+#define	BT485_CMD_3			0x14
+#define	BT485_CUR_RAM			0x16
+#define	BT485_CUR_LOW_X			0x18
+#define	BT485_CUR_HIGH_X		0x1a
+#define	BT485_CUR_LOW_Y			0x1c
+#define	BT485_CUR_HIGH_Y		0x1e
+
+
+/*
+ * Useful defines for managing the BT463 on the 24-plane TGAs
+ */
+
+#define	BT463_ADDR_LO		0x0
+#define	BT463_ADDR_HI		0x1
+#define	BT463_REG_ACC		0x2
+#define	BT463_PALETTE		0x3
+
+#define	BT463_CUR_CLR_0		0x0100
+#define	BT463_CUR_CLR_1		0x0101
+
+#define	BT463_CMD_REG_0		0x0201
+#define	BT463_CMD_REG_1		0x0202
+#define	BT463_CMD_REG_2		0x0203
+
+#define	BT463_READ_MASK_0	0x0205
+#define	BT463_READ_MASK_1	0x0206
+#define	BT463_READ_MASK_2	0x0207
+#define	BT463_READ_MASK_3	0x0208
+
+#define	BT463_BLINK_MASK_0	0x0209
+#define	BT463_BLINK_MASK_1	0x020a
+#define	BT463_BLINK_MASK_2	0x020b
+#define	BT463_BLINK_MASK_3	0x020c
+
+#define	BT463_WINDOW_TYPE_BASE	0x0300
+
+/*
+ * The framebuffer driver private data.
+ */
+
+struct tga_par {
+	/* PCI device.  */
+	struct pci_dev *pdev;
+
+	/* Device dependent information.  */
+	void __iomem *tga_mem_base;
+	void __iomem *tga_fb_base;
+	void __iomem *tga_regs_base;
+	u8 tga_type;				/* TGA_TYPE_XXX */
+	u8 tga_chip_rev;			/* dc21030 revision */
+
+	/* Remember blank mode.  */
+	u8 vesa_blanked;
+
+	/* Define the video mode.  */
+	u32 xres, yres;			/* resolution in pixels */
+	u32 htimings;			/* horizontal timing register */
+	u32 vtimings;			/* vertical timing register */
+	u32 pll_freq;			/* pixclock in mhz */
+	u32 bits_per_pixel;		/* bits per pixel */
+	u32 sync_on_green;		/* set if sync is on green */
+};
+
+
+/*
+ * Macros for reading/writing TGA and RAMDAC registers
+ */
+
+static inline void
+TGA_WRITE_REG(struct tga_par *par, u32 v, u32 r)
+{
+	writel(v, par->tga_regs_base +r);
+}
+
+static inline u32
+TGA_READ_REG(struct tga_par *par, u32 r)
+{
+	return readl(par->tga_regs_base +r);
+}
+
+static inline void
+BT485_WRITE(struct tga_par *par, u8 v, u8 r)
+{
+	TGA_WRITE_REG(par, r, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, v | (r << 8), TGA_RAMDAC_REG);
+}
+
+static inline void
+BT463_LOAD_ADDR(struct tga_par *par, u16 a)
+{
+	TGA_WRITE_REG(par, BT463_ADDR_LO<<2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, (BT463_ADDR_LO<<10) | (a & 0xff), TGA_RAMDAC_REG);
+	TGA_WRITE_REG(par, BT463_ADDR_HI<<2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, (BT463_ADDR_HI<<10) | (a >> 8), TGA_RAMDAC_REG);
+}
+
+static inline void
+BT463_WRITE(struct tga_par *par, u32 m, u16 a, u8 v)
+{
+	BT463_LOAD_ADDR(par, a);
+	TGA_WRITE_REG(par, m << 2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, m << 10 | v, TGA_RAMDAC_REG);
+}
+
+#endif /* TGAFB_H */
diff --git a/include/video/trident.h b/include/video/trident.h
new file mode 100644
index 000000000000..200be2551681
--- /dev/null
+++ b/include/video/trident.h
@@ -0,0 +1,175 @@
+
+#ifndef TRIDENTFB_DEBUG
+#define TRIDENTFB_DEBUG 0
+#endif
+
+#if TRIDENTFB_DEBUG
+#define debug(f,a...)	printk("%s:" f,  __FUNCTION__ , ## a);mdelay(1000);
+#else
+#define debug(f,a...)
+#endif
+
+#define output(f, a...) pr_info("tridentfb: " f, ## a)
+
+#define Kb	(1024)
+#define Mb	(Kb*Kb)
+
+/* PCI IDS of supported cards temporarily here */
+
+#define CYBER9320	0x9320
+#define CYBER9388	0x9388
+#define CYBER9382	0x9382		/* the real PCI id for this is 9660 */
+#define CYBER9385	0x9385		/* ditto */		
+#define CYBER9397	0x9397
+#define CYBER9397DVD	0x939A
+#define CYBER9520	0x9520
+#define CYBER9525DVD	0x9525
+#define TGUI9660	0x9660
+#define IMAGE975	0x9750
+#define IMAGE985	0x9850
+#define BLADE3D		0x9880
+#define CYBERBLADEE4	0x9540
+#define CYBERBLADEi7	0x8400
+#define CYBERBLADEi7D	0x8420
+#define CYBERBLADEi1	0x8500
+#define CYBERBLADEi1D	0x8520
+#define CYBERBLADEAi1	0x8600
+#define CYBERBLADEAi1D	0x8620
+#define CYBERBLADEXPAi1 0x8820
+#define CYBERBLADEXPm8  0x9910
+#define CYBERBLADEXPm16 0x9930
+
+/* acceleration families */
+#define IMAGE	0
+#define BLADE	1
+#define XP	2
+
+#define is_image(id)	
+#define is_xp(id)	((id == CYBERBLADEXPAi1) ||\
+			 (id == CYBERBLADEXPm8) ||\
+			 (id == CYBERBLADEXPm16)) 
+
+#define is_blade(id)	((id == BLADE3D) ||\
+			 (id == CYBERBLADEE4) ||\
+			 (id == CYBERBLADEi7) ||\
+			 (id == CYBERBLADEi7D) ||\
+			 (id == CYBERBLADEi1) ||\
+			 (id == CYBERBLADEi1D) ||\
+			 (id ==	CYBERBLADEAi1) ||\
+			 (id ==	CYBERBLADEAi1D))
+
+/* these defines are for 'lcd' variable */
+#define LCD_STRETCH	0
+#define LCD_CENTER	1
+#define LCD_BIOS	2
+
+/* display types */
+#define DISPLAY_CRT	0
+#define DISPLAY_FP	1
+
+#define flatpanel (displaytype == DISPLAY_FP)
+
+/* General Registers */
+#define SPR	0x1F		/* Software Programming Register (videoram) */
+
+/* 3C4 */
+#define RevisionID 0x09
+#define OldOrNew 0x0B	
+#define ConfPort1 0x0C
+#define ConfPort2 0x0C
+#define NewMode2 0x0D
+#define NewMode1 0x0E
+#define Protection 0x11
+#define MCLKLow 0x16
+#define MCLKHigh 0x17
+#define ClockLow 0x18
+#define ClockHigh 0x19
+#define SSetup 0x20
+#define SKey 0x37
+#define SPKey 0x57
+
+/* 0x3x4 */
+#define CRTHTotal	0x00
+#define CRTHDispEnd	0x01
+#define CRTHBlankStart	0x02
+#define CRTHBlankEnd	0x03
+#define CRTHSyncStart	0x04
+#define CRTHSyncEnd	0x05
+
+#define CRTVTotal	0x06
+#define CRTVDispEnd	0x12
+#define CRTVBlankStart	0x15
+#define CRTVBlankEnd	0x16
+#define CRTVSyncStart	0x10
+#define CRTVSyncEnd	0x11
+
+#define CRTOverflow	0x07
+#define CRTPRowScan	0x08
+#define CRTMaxScanLine	0x09
+#define CRTModeControl	0x17
+#define CRTLineCompare	0x18
+
+/* 3x4 */
+#define StartAddrHigh 0x0C
+#define StartAddrLow 0x0D
+#define Offset 0x13
+#define Underline 0x14
+#define CRTCMode 0x17
+#define CRTCModuleTest 0x1E
+#define FIFOControl 0x20
+#define LinearAddReg 0x21
+#define DRAMTiming 0x23
+#define New32 0x23
+#define RAMDACTiming 0x25
+#define CRTHiOrd 0x27
+#define AddColReg 0x29
+#define InterfaceSel 0x2A
+#define HorizOverflow 0x2B
+#define GETest 0x2D
+#define Performance 0x2F
+#define GraphEngReg 0x36
+#define I2C 0x37
+#define PixelBusReg 0x38
+#define PCIReg 0x39
+#define DRAMControl 0x3A
+#define MiscContReg 0x3C
+#define CursorXLow 0x40
+#define CursorXHigh 0x41
+#define CursorYLow 0x42
+#define CursorYHigh 0x43
+#define CursorLocLow 0x44
+#define CursorLocHigh 0x45
+#define CursorXOffset 0x46
+#define CursorYOffset 0x47
+#define CursorFG1 0x48
+#define CursorFG2 0x49
+#define CursorFG3 0x4A
+#define CursorFG4 0x4B
+#define CursorBG1 0x4C
+#define CursorBG2 0x4D
+#define CursorBG3 0x4E
+#define CursorBG4 0x4F
+#define CursorControl 0x50
+#define PCIRetry 0x55
+#define PreEndControl 0x56
+#define PreEndFetch 0x57
+#define PCIMaster 0x60
+#define Enhancement0 0x62
+#define NewEDO 0x64
+#define TVinterface 0xC0
+#define TVMode 0xC1
+#define ClockControl 0xCF
+
+
+/* 3CE */
+#define MiscExtFunc 0x0F
+#define PowerStatus 0x23
+#define MiscIntContReg 0x2F
+#define CyberControl 0x30
+#define CyberEnhance 0x31
+#define FPConfig     0x33
+#define VertStretch  0x52
+#define HorStretch   0x53
+#define BiosMode     0x5c
+#define BiosReg      0x5d
+
diff --git a/include/video/tx3912.h b/include/video/tx3912.h
new file mode 100644
index 000000000000..6b6d006038c2
--- /dev/null
+++ b/include/video/tx3912.h
@@ -0,0 +1,62 @@
+/*
+ * linux/include/video/tx3912.h
+ *
+ * Copyright (C) 2001 Steven Hill (sjhill@realitydiluted.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Includes for TMPR3912/05 and PR31700 LCD controller registers
+ */
+#include <asm/tx3912.h>
+
+#define VidCtrl1        REG_AT(0x028)
+#define VidCtrl2        REG_AT(0x02C)
+#define VidCtrl3        REG_AT(0x030)
+#define VidCtrl4        REG_AT(0x034)
+#define VidCtrl5        REG_AT(0x038)
+#define VidCtrl6        REG_AT(0x03C)
+#define VidCtrl7        REG_AT(0x040)
+#define VidCtrl8        REG_AT(0x044)
+#define VidCtrl9        REG_AT(0x048)
+#define VidCtrl10       REG_AT(0x04C)
+#define VidCtrl11       REG_AT(0x050)
+#define VidCtrl12       REG_AT(0x054)
+#define VidCtrl13       REG_AT(0x058)
+#define VidCtrl14       REG_AT(0x05C)
+
+/* Video Control 1 Register */
+#define LINECNT         0xffc00000
+#define LINECNT_SHIFT   22
+#define LOADDLY         BIT(21)
+#define BAUDVAL         (BIT(20) | BIT(19) | BIT(18) | BIT(17) | BIT(16))
+#define BAUDVAL_SHIFT   16
+#define VIDDONEVAL      (BIT(15) | BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9))
+#define VIDDONEVAL_SHIFT  9
+#define ENFREEZEFRAME   BIT(8)
+#define TX3912_VIDCTRL1_BITSEL_MASK	0x000000c0
+#define TX3912_VIDCTRL1_2BIT_GRAY	0x00000040
+#define TX3912_VIDCTRL1_4BIT_GRAY	0x00000080
+#define TX3912_VIDCTRL1_8BIT_COLOR	0x000000c0
+#define BITSEL_SHIFT    6
+#define DISPSPLIT       BIT(5)
+#define DISP8           BIT(4)
+#define DFMODE          BIT(3)
+#define INVVID          BIT(2)
+#define DISPON          BIT(1)
+#define ENVID           BIT(0)
+
+/* Video Control 2 Register */
+#define VIDRATE_MASK    0xffc00000
+#define VIDRATE_SHIFT   22
+#define HORZVAL_MASK    0x001ff000
+#define HORZVAL_SHIFT   12
+#define LINEVAL_MASK    0x000001ff
+
+/* Video Control 3 Register */
+#define TX3912_VIDCTRL3_VIDBANK_MASK    0xfff00000
+#define TX3912_VIDCTRL3_VIDBASEHI_MASK  0x000ffff0
+
+/* Video Control 4 Register */
+#define TX3912_VIDCTRL4_VIDBASELO_MASK  0x000ffff0
diff --git a/include/video/vga.h b/include/video/vga.h
new file mode 100644
index 000000000000..700d6c8eb736
--- /dev/null
+++ b/include/video/vga.h
@@ -0,0 +1,482 @@
+/*
+ * linux/include/video/vga.h -- standard VGA chipset interaction
+ *
+ * Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
+ * 
+ * Copyright history from vga16fb.c:
+ *	Copyright 1999 Ben Pfaff and Petr Vandrovec
+ *	Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
+ *	Based on VESA framebuffer (c) 1998 Gerd Knorr
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.  
+ *
+ */
+
+#ifndef __linux_video_vga_h__
+#define __linux_video_vga_h__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#ifndef CONFIG_AMIGA
+#include <asm/vga.h>
+#else
+/*
+ * FIXME
+ * Ugh, we don't have PCI space, so map readb() and friends to use Zorro space
+ * for MMIO accesses. This should make cirrusfb work again on Amiga
+ */
+#undef inb_p
+#undef inw_p
+#undef outb_p
+#undef outw
+#undef readb
+#undef writeb
+#undef writew
+#define inb_p(port)	0
+#define inw_p(port)	0
+#define outb_p(port, val)	do { } while (0)
+#define outw(port, val)		do { } while (0)
+#define readb		z_readb
+#define writeb		z_writeb
+#define writew		z_writew
+#endif
+#include <asm/byteorder.h>
+
+
+/* Some of the code below is taken from SVGAlib.  The original,
+   unmodified copyright notice for that code is below. */
+/* VGAlib version 1.2 - (c) 1993 Tommy Frandsen                    */
+/*                                                                 */
+/* This library is free software; you can redistribute it and/or   */
+/* modify it without any restrictions. This library is distributed */
+/* in the hope that it will be useful, but without any warranty.   */
+
+/* Multi-chipset support Copyright 1993 Harm Hanemaayer */
+/* partially copyrighted (C) 1993 by Hartmut Schirmer */
+
+/* VGA data register ports */
+#define VGA_CRT_DC  	0x3D5	/* CRT Controller Data Register - color emulation */
+#define VGA_CRT_DM  	0x3B5	/* CRT Controller Data Register - mono emulation */
+#define VGA_ATT_R   	0x3C1	/* Attribute Controller Data Read Register */
+#define VGA_ATT_W   	0x3C0	/* Attribute Controller Data Write Register */
+#define VGA_GFX_D   	0x3CF	/* Graphics Controller Data Register */
+#define VGA_SEQ_D   	0x3C5	/* Sequencer Data Register */
+#define VGA_MIS_R   	0x3CC	/* Misc Output Read Register */
+#define VGA_MIS_W   	0x3C2	/* Misc Output Write Register */
+#define VGA_FTC_R	0x3CA	/* Feature Control Read Register */
+#define VGA_IS1_RC  	0x3DA	/* Input Status Register 1 - color emulation */
+#define VGA_IS1_RM  	0x3BA	/* Input Status Register 1 - mono emulation */
+#define VGA_PEL_D   	0x3C9	/* PEL Data Register */
+#define VGA_PEL_MSK 	0x3C6	/* PEL mask register */
+
+/* EGA-specific registers */
+#define EGA_GFX_E0	0x3CC	/* Graphics enable processor 0 */
+#define EGA_GFX_E1	0x3CA	/* Graphics enable processor 1 */
+
+/* VGA index register ports */
+#define VGA_CRT_IC  	0x3D4	/* CRT Controller Index - color emulation */
+#define VGA_CRT_IM  	0x3B4	/* CRT Controller Index - mono emulation */
+#define VGA_ATT_IW  	0x3C0	/* Attribute Controller Index & Data Write Register */
+#define VGA_GFX_I   	0x3CE	/* Graphics Controller Index */
+#define VGA_SEQ_I   	0x3C4	/* Sequencer Index */
+#define VGA_PEL_IW  	0x3C8	/* PEL Write Index */
+#define VGA_PEL_IR  	0x3C7	/* PEL Read Index */
+
+/* standard VGA indexes max counts */
+#define VGA_CRT_C   	0x19	/* Number of CRT Controller Registers */
+#define VGA_ATT_C   	0x15	/* Number of Attribute Controller Registers */
+#define VGA_GFX_C   	0x09	/* Number of Graphics Controller Registers */
+#define VGA_SEQ_C   	0x05	/* Number of Sequencer Registers */
+#define VGA_MIS_C   	0x01	/* Number of Misc Output Register */
+
+/* VGA misc register bit masks */
+#define VGA_MIS_COLOR		0x01
+#define VGA_MIS_ENB_MEM_ACCESS	0x02
+#define VGA_MIS_DCLK_28322_720	0x04
+#define VGA_MIS_ENB_PLL_LOAD	(0x04 | 0x08)
+#define VGA_MIS_SEL_HIGH_PAGE	0x20
+
+/* VGA CRT controller register indices */
+#define VGA_CRTC_H_TOTAL	0
+#define VGA_CRTC_H_DISP		1
+#define VGA_CRTC_H_BLANK_START	2
+#define VGA_CRTC_H_BLANK_END	3
+#define VGA_CRTC_H_SYNC_START	4
+#define VGA_CRTC_H_SYNC_END	5
+#define VGA_CRTC_V_TOTAL	6
+#define VGA_CRTC_OVERFLOW	7
+#define VGA_CRTC_PRESET_ROW	8
+#define VGA_CRTC_MAX_SCAN	9
+#define VGA_CRTC_CURSOR_START	0x0A
+#define VGA_CRTC_CURSOR_END	0x0B
+#define VGA_CRTC_START_HI	0x0C
+#define VGA_CRTC_START_LO	0x0D
+#define VGA_CRTC_CURSOR_HI	0x0E
+#define VGA_CRTC_CURSOR_LO	0x0F
+#define VGA_CRTC_V_SYNC_START	0x10
+#define VGA_CRTC_V_SYNC_END	0x11
+#define VGA_CRTC_V_DISP_END	0x12
+#define VGA_CRTC_OFFSET		0x13
+#define VGA_CRTC_UNDERLINE	0x14
+#define VGA_CRTC_V_BLANK_START	0x15
+#define VGA_CRTC_V_BLANK_END	0x16
+#define VGA_CRTC_MODE		0x17
+#define VGA_CRTC_LINE_COMPARE	0x18
+#define VGA_CRTC_REGS		VGA_CRT_C
+
+/* VGA CRT controller bit masks */
+#define VGA_CR11_LOCK_CR0_CR7	0x80 /* lock writes to CR0 - CR7 */
+#define VGA_CR17_H_V_SIGNALS_ENABLED 0x80
+
+/* VGA attribute controller register indices */
+#define VGA_ATC_PALETTE0	0x00
+#define VGA_ATC_PALETTE1	0x01
+#define VGA_ATC_PALETTE2	0x02
+#define VGA_ATC_PALETTE3	0x03
+#define VGA_ATC_PALETTE4	0x04
+#define VGA_ATC_PALETTE5	0x05
+#define VGA_ATC_PALETTE6	0x06
+#define VGA_ATC_PALETTE7	0x07
+#define VGA_ATC_PALETTE8	0x08
+#define VGA_ATC_PALETTE9	0x09
+#define VGA_ATC_PALETTEA	0x0A
+#define VGA_ATC_PALETTEB	0x0B
+#define VGA_ATC_PALETTEC	0x0C
+#define VGA_ATC_PALETTED	0x0D
+#define VGA_ATC_PALETTEE	0x0E
+#define VGA_ATC_PALETTEF	0x0F
+#define VGA_ATC_MODE		0x10
+#define VGA_ATC_OVERSCAN	0x11
+#define VGA_ATC_PLANE_ENABLE	0x12
+#define VGA_ATC_PEL		0x13
+#define VGA_ATC_COLOR_PAGE	0x14
+
+#define VGA_AR_ENABLE_DISPLAY	0x20
+
+/* VGA sequencer register indices */
+#define VGA_SEQ_RESET		0x00
+#define VGA_SEQ_CLOCK_MODE	0x01
+#define VGA_SEQ_PLANE_WRITE	0x02
+#define VGA_SEQ_CHARACTER_MAP	0x03
+#define VGA_SEQ_MEMORY_MODE	0x04
+
+/* VGA sequencer register bit masks */
+#define VGA_SR01_CHAR_CLK_8DOTS	0x01 /* bit 0: character clocks 8 dots wide are generated */
+#define VGA_SR01_SCREEN_OFF	0x20 /* bit 5: Screen is off */
+#define VGA_SR02_ALL_PLANES	0x0F /* bits 3-0: enable access to all planes */
+#define VGA_SR04_EXT_MEM	0x02 /* bit 1: allows complete mem access to 256K */
+#define VGA_SR04_SEQ_MODE	0x04 /* bit 2: directs system to use a sequential addressing mode */
+#define VGA_SR04_CHN_4M		0x08 /* bit 3: selects modulo 4 addressing for CPU access to display memory */
+
+/* VGA graphics controller register indices */
+#define VGA_GFX_SR_VALUE	0x00
+#define VGA_GFX_SR_ENABLE	0x01
+#define VGA_GFX_COMPARE_VALUE	0x02
+#define VGA_GFX_DATA_ROTATE	0x03
+#define VGA_GFX_PLANE_READ	0x04
+#define VGA_GFX_MODE		0x05
+#define VGA_GFX_MISC		0x06
+#define VGA_GFX_COMPARE_MASK	0x07
+#define VGA_GFX_BIT_MASK	0x08
+
+/* VGA graphics controller bit masks */
+#define VGA_GR06_GRAPHICS_MODE	0x01
+
+/* macro for composing an 8-bit VGA register index and value
+ * into a single 16-bit quantity */
+#define VGA_OUT16VAL(v, r)       (((v) << 8) | (r))
+
+/* decide whether we should enable the faster 16-bit VGA register writes */
+#ifdef __LITTLE_ENDIAN
+#define VGA_OUTW_WRITE
+#endif
+
+/* VGA State Save and Restore */
+#define VGA_SAVE_FONT0 1  /* save/restore plane 2 fonts	  */
+#define VGA_SAVE_FONT1 2  /* save/restore plane 3 fonts   */
+#define VGA_SAVE_TEXT  4  /* save/restore plane 0/1 fonts */
+#define VGA_SAVE_FONTS 7  /* save/restore all fonts	  */
+#define VGA_SAVE_MODE  8  /* save/restore video mode 	  */
+#define VGA_SAVE_CMAP  16 /* save/restore color map/DAC   */
+
+struct vgastate {
+	void __iomem *vgabase;	/* mmio base, if supported 		   */
+	unsigned long membase;	/* VGA window base, 0 for default - 0xA000 */
+	__u32 memsize;		/* VGA window size, 0 for default 64K	   */
+	__u32 flags;		/* what state[s] to save (see VGA_SAVE_*)  */
+	__u32 depth;		/* current fb depth, not important	   */
+	__u32 num_attr;		/* number of att registers, 0 for default  */
+	__u32 num_crtc;		/* number of crt registers, 0 for default  */
+	__u32 num_gfx;		/* number of gfx registers, 0 for default  */
+	__u32 num_seq;		/* number of seq registers, 0 for default  */
+	void *vidstate;
+};	
+
+extern int save_vga(struct vgastate *state);
+extern int restore_vga(struct vgastate *state);
+
+/*
+ * generic VGA port read/write
+ */
+ 
+static inline unsigned char vga_io_r (unsigned short port)
+{
+	return inb_p(port);
+}
+
+static inline void vga_io_w (unsigned short port, unsigned char val)
+{
+	outb_p(val, port);
+}
+
+static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
+				  unsigned char val)
+{
+	outw(VGA_OUT16VAL (val, reg), port);
+}
+
+static inline unsigned char vga_mm_r (void __iomem *regbase, unsigned short port)
+{
+	return readb (regbase + port);
+}
+
+static inline void vga_mm_w (void __iomem *regbase, unsigned short port, unsigned char val)
+{
+	writeb (val, regbase + port);
+}
+
+static inline void vga_mm_w_fast (void __iomem *regbase, unsigned short port,
+				  unsigned char reg, unsigned char val)
+{
+	writew (VGA_OUT16VAL (val, reg), regbase + port);
+}
+
+static inline unsigned char vga_r (void __iomem *regbase, unsigned short port)
+{
+	if (regbase)
+		return vga_mm_r (regbase, port);
+	else
+		return vga_io_r (port);
+}
+
+static inline void vga_w (void __iomem *regbase, unsigned short port, unsigned char val)
+{
+	if (regbase)
+		vga_mm_w (regbase, port, val);
+	else
+		vga_io_w (port, val);
+}
+
+
+static inline void vga_w_fast (void __iomem *regbase, unsigned short port,
+			       unsigned char reg, unsigned char val)
+{
+	if (regbase)
+		vga_mm_w_fast (regbase, port, reg, val);
+	else
+		vga_io_w_fast (port, reg, val);
+}
+
+
+/*
+ * VGA CRTC register read/write
+ */
+ 
+static inline unsigned char vga_rcrt (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_CRT_IC, reg);
+        return vga_r (regbase, VGA_CRT_DC);
+}
+
+static inline void vga_wcrt (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_CRT_IC, reg, val);
+#else
+        vga_w (regbase, VGA_CRT_IC, reg);
+        vga_w (regbase, VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rcrt (unsigned char reg)
+{
+        vga_io_w (VGA_CRT_IC, reg);
+        return vga_io_r (VGA_CRT_DC);
+}
+
+static inline void vga_io_wcrt (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_CRT_IC, reg, val);
+#else
+        vga_io_w (VGA_CRT_IC, reg);
+        vga_io_w (VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rcrt (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_CRT_IC, reg);
+        return vga_mm_r (regbase, VGA_CRT_DC);
+}
+
+static inline void vga_mm_wcrt (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_CRT_IC, reg, val);
+#else
+        vga_mm_w (regbase, VGA_CRT_IC, reg);
+        vga_mm_w (regbase, VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+
+/*
+ * VGA sequencer register read/write
+ */
+ 
+static inline unsigned char vga_rseq (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_SEQ_I, reg);
+        return vga_r (regbase, VGA_SEQ_D);
+}
+
+static inline void vga_wseq (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_SEQ_I, reg, val);
+#else
+        vga_w (regbase, VGA_SEQ_I, reg);
+        vga_w (regbase, VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rseq (unsigned char reg)
+{
+        vga_io_w (VGA_SEQ_I, reg);
+        return vga_io_r (VGA_SEQ_D);
+}
+
+static inline void vga_io_wseq (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_SEQ_I, reg, val);
+#else
+        vga_io_w (VGA_SEQ_I, reg);
+        vga_io_w (VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rseq (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_SEQ_I, reg);
+        return vga_mm_r (regbase, VGA_SEQ_D);
+}
+
+static inline void vga_mm_wseq (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_SEQ_I, reg, val);
+#else
+        vga_mm_w (regbase, VGA_SEQ_I, reg);
+        vga_mm_w (regbase, VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+/*
+ * VGA graphics controller register read/write
+ */
+ 
+static inline unsigned char vga_rgfx (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_GFX_I, reg);
+        return vga_r (regbase, VGA_GFX_D);
+}
+
+static inline void vga_wgfx (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_GFX_I, reg, val);
+#else
+        vga_w (regbase, VGA_GFX_I, reg);
+        vga_w (regbase, VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rgfx (unsigned char reg)
+{
+        vga_io_w (VGA_GFX_I, reg);
+        return vga_io_r (VGA_GFX_D);
+}
+
+static inline void vga_io_wgfx (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_GFX_I, reg, val);
+#else
+        vga_io_w (VGA_GFX_I, reg);
+        vga_io_w (VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rgfx (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_GFX_I, reg);
+        return vga_mm_r (regbase, VGA_GFX_D);
+}
+
+static inline void vga_mm_wgfx (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_GFX_I, reg, val);
+#else
+        vga_mm_w (regbase, VGA_GFX_I, reg);
+        vga_mm_w (regbase, VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+
+/*
+ * VGA attribute controller register read/write
+ */
+ 
+static inline unsigned char vga_rattr (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_ATT_IW, reg);
+        return vga_r (regbase, VGA_ATT_R);
+}
+
+static inline void vga_wattr (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+        vga_w (regbase, VGA_ATT_IW, reg);
+        vga_w (regbase, VGA_ATT_W, val);
+}
+
+static inline unsigned char vga_io_rattr (unsigned char reg)
+{
+        vga_io_w (VGA_ATT_IW, reg);
+        return vga_io_r (VGA_ATT_R);
+}
+
+static inline void vga_io_wattr (unsigned char reg, unsigned char val)
+{
+        vga_io_w (VGA_ATT_IW, reg);
+        vga_io_w (VGA_ATT_W, val);
+}
+
+static inline unsigned char vga_mm_rattr (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_ATT_IW, reg);
+        return vga_mm_r (regbase, VGA_ATT_R);
+}
+
+static inline void vga_mm_wattr (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+        vga_mm_w (regbase, VGA_ATT_IW, reg);
+        vga_mm_w (regbase, VGA_ATT_W, val);
+}
+
+#endif /* __linux_video_vga_h__ */
diff --git a/include/video/w100fb.h b/include/video/w100fb.h
new file mode 100644
index 000000000000..bd548c2b47c4
--- /dev/null
+++ b/include/video/w100fb.h
@@ -0,0 +1,21 @@
+/*
+ *  Support for the w100 frame buffer.
+ *
+ *  Copyright (c) 2004 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set by machine specific code and used in the probe routine
+ * of drivers/video/w100fb.c
+ */
+
+struct w100fb_mach_info {
+	void (*w100fb_ssp_send)(u8 adrs, u8 data);
+	int comadj;
+	int phadadj;
+};